* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, nmi: Use predefined numbers instead of hardcoded one
x86: asm/processor.h: remove double declaration
x86, mtrr: replace MTRRdefType_MSR with msr-index's MSR_MTRRdefType
x86, mtrr: replace MTRRfix4K_C0000_MSR with msr-index's MSR_MTRRfix4K_C0000
x86, mtrr: remove mtrr MSRs double declaration
x86, mtrr: replace MTRRfix16K_80000_MSR with msr-index's MSR_MTRRfix16K_80000
x86, mtrr: replace MTRRfix64K_00000_MSR with msr-index's MSR_MTRRfix64K_00000
x86, mtrr: replace MTRRcap_MSR with msr-index's MSR_MTRRcap
x86: mce: remove duplicated #include
x86: msr-index.h remove duplicate MSR C001_0015 declaration
x86: clean up arch/x86/kernel/tsc_sync.c a bit
x86: use symbolic name for VM86_SIGNAL when used as vm86 default return
x86: added 'ifndef _ASM_X86_IOMAP_H' to iomap.h
x86: avoid multiple declaration of kstack_depth_to_print
x86: vdso/vma.c declare vdso_enabled and arch_setup_additional_pages before they get used
x86: clean up declarations and variables
x86: apic/x2apic_cluster.c x86_cpu_to_logical_apicid should be static
x86 early quirks: eliminate unused function
include/linux/version.h
include/linux/utsrelease.h
include/linux/bounds.h
+include/generated
# stgit generated dirs
patches-*
-What: /debug/pktcdvd/pktcdvd[0-7]
+What: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
Date: Oct. 2006
KernelVersion: 2.6.20
Contact: Thomas Maier <balagi@justmail.de>
The pktcdvd module (packet writing driver) creates
these files in debugfs:
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
info (0444) Lots of driver statistics and infos.
Example:
-------
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
gpe1F: 0 invalid
gpe_all: 1192
sci: 1194
+ sci_not: 0
- sci - The total number of times the ACPI SCI
- has claimed an interrupt.
+ sci - The number of times the ACPI SCI
+ has been called and claimed an interrupt.
+
+ sci_not - The number of times the ACPI SCI
+ has been called and NOT claimed an interrupt.
gpe_all - count of SCI caused by GPEs.
--- /dev/null
+What: /sys/kernel/slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The /sys/kernel/slab directory contains a snapshot of the
+ internal state of the SLUB allocator for each cache. Certain
+ files may be modified to change the behavior of the cache (and
+ any cache it aliases, if any).
+Users: kernel memory tuning tools
+
+What: /sys/kernel/slab/cache/aliases
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The aliases file is read-only and specifies how many caches
+ have merged into this cache.
+
+What: /sys/kernel/slab/cache/align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The align file is read-only and specifies the cache's object
+ alignment in bytes.
+
+What: /sys/kernel/slab/cache/alloc_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_calls file is read-only and lists the kernel code
+ locations from which allocations for this cache were performed.
+ The alloc_calls file only contains information if debugging is
+ enabled for that cache (see Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/alloc_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_fastpath file is read-only and specifies how many
+ objects have been allocated using the fast path.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_from_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_from_partial file is read-only and specifies how
+ many times a cpu slab has been full and it has been refilled
+ by using a slab from the list of partially used slabs.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_refill
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_refill file is read-only and specifies how many
+ times the per-cpu freelist was empty but there were objects
+ available as the result of remote cpu frees.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slab file is read-only and specifies how many times
+ a new slab had to be allocated from the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slowpath file is read-only and specifies how many
+ objects have been allocated using the slow path because of a
+ refill or allocation from a partial or new slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/cache_dma
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cache_dma file is read-only and specifies whether objects
+ are from ZONE_DMA.
+ Available when CONFIG_ZONE_DMA is enabled.
+
+What: /sys/kernel/slab/cache/cpu_slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cpu_slabs file is read-only and displays how many cpu slabs
+ are active and their NUMA locality.
+
+What: /sys/kernel/slab/cache/cpuslab_flush
+Date: April 2009
+KernelVersion: 2.6.31
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file cpuslab_flush is read-only and specifies how many
+ times a cache's cpu slabs have been flushed as the result of
+ destroying or shrinking a cache, a cpu going offline, or as
+ the result of forcing an allocation from a certain node.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/ctor
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The ctor file is read-only and specifies the cache's object
+ constructor function, which is invoked for each object when a
+ new slab is allocated.
+
+What: /sys/kernel/slab/cache/deactivate_empty
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_empty is read-only and specifies how many
+ times an empty cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_full
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_full is read-only and specifies how many
+ times a full cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_remote_frees
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_remote_frees is read-only and specifies how
+ many times a cpu slab has been deactivated and contained free
+ objects that were freed remotely.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_head
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_head is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ head of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_tail
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_tail is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ tail of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/destroy_by_rcu
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The destroy_by_rcu file is read-only and specifies whether
+ slabs (not objects) are freed by rcu.
+
+What: /sys/kernel/slab/cache/free_add_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_add_partial is read-only and specifies how many
+ times an object has been freed in a full slab so that it had to
+ added to its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_calls file is read-only and lists the locations of
+ object frees if slab debugging is enabled (see
+ Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/free_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_fastpath file is read-only and specifies how many
+ objects have been freed using the fast path because it was an
+ object from the cpu slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_frozen
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_frozen file is read-only and specifies how many
+ objects have been freed to a frozen slab (i.e. a remote cpu
+ slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_remove_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_remove_partial is read-only and specifies how
+ many times an object has been freed to a now-empty slab so
+ that it had to be removed from its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slab file is read-only and specifies how many times an
+ empty slab has been freed back to the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slowpath file is read-only and specifies how many
+ objects have been freed using the slow path (i.e. to a full or
+ partial slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/hwcache_align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The hwcache_align file is read-only and specifies whether
+ objects are aligned on cachelines.
+
+What: /sys/kernel/slab/cache/min_partial
+Date: February 2009
+KernelVersion: 2.6.30
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ David Rientjes <rientjes@google.com>
+Description:
+ The min_partial file specifies how many empty slabs shall
+ remain on a node's partial list to avoid the overhead of
+ allocating new slabs. Such slabs may be reclaimed by utilizing
+ the shrink file.
+
+What: /sys/kernel/slab/cache/object_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The object_size file is read-only and specifies the cache's
+ object size.
+
+What: /sys/kernel/slab/cache/objects
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects file is read-only and displays how many objects are
+ active and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/objects_partial
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects_partial file is read-only and displays how many
+ objects are on partial slabs and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/objs_per_slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file objs_per_slab is read-only and specifies how many
+ objects may be allocated from a single slab of the order
+ specified in /sys/kernel/slab/cache/order.
+
+What: /sys/kernel/slab/cache/order
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The order file specifies the page order at which new slabs are
+ allocated. It is writable and can be changed to increase the
+ number of objects per slab. If a slab cannot be allocated
+ because of fragmentation, SLUB will retry with the minimum order
+ possible depending on its characteristics.
+
+What: /sys/kernel/slab/cache/order_fallback
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file order_fallback is read-only and specifies how many
+ times an allocation of a new slab has not been possible at the
+ cache's order and instead fallen back to its minimum possible
+ order.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/partial
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The partial file is read-only and displays how long many
+ partial slabs there are and how long each node's list is.
+
+What: /sys/kernel/slab/cache/poison
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The poison file specifies whether objects should be poisoned
+ when a new slab is allocated.
+
+What: /sys/kernel/slab/cache/reclaim_account
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The reclaim_account file specifies whether the cache's objects
+ are reclaimable (and grouped by their mobility).
+
+What: /sys/kernel/slab/cache/red_zone
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The red_zone file specifies whether the cache's objects are red
+ zoned.
+
+What: /sys/kernel/slab/cache/remote_node_defrag_ratio
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file remote_node_defrag_ratio specifies the percentage of
+ times SLUB will attempt to refill the cpu slab with a partial
+ slab from a remote node as opposed to allocating a new slab on
+ the local node. This reduces the amount of wasted memory over
+ the entire system but can be expensive.
+ Available when CONFIG_NUMA is enabled.
+
+What: /sys/kernel/slab/cache/sanity_checks
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The sanity_checks file specifies whether expensive checks
+ should be performed on free and, at minimum, enables double free
+ checks. Caches that enable sanity_checks cannot be merged with
+ caches that do not.
+
+What: /sys/kernel/slab/cache/shrink
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The shrink file is written when memory should be reclaimed from
+ a cache. Empty partial slabs are freed and the partial list is
+ sorted so the slabs with the fewest available objects are used
+ first.
+
+What: /sys/kernel/slab/cache/slab_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slab_size file is read-only and specifies the object size
+ with metadata (debugging information and alignment) in bytes.
+
+What: /sys/kernel/slab/cache/slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slabs file is read-only and displays how long many slabs
+ there are (both cpu and partial) and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/store_user
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The store_user file specifies whether the location of
+ allocation or free should be tracked for a cache.
+
+What: /sys/kernel/slab/cache/total_objects
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The total_objects file is read-only and displays how many total
+ objects a cache has and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/trace
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The trace file specifies whether object allocations and frees
+ should be traced.
+
+What: /sys/kernel/slab/cache/validate
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ Writing to the validate file causes SLUB to traverse all of its
+ cache's objects and check the validity of metadata.
###
# The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs
+PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
xmldocs: $(BOOKS)
$(call cmd,db2pdf)
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
build_main_index = rm -rf $(main_idx) && \
echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
dochelp:
@echo ' Linux kernel internal documentation in different formats:'
@echo ' htmldocs - HTML'
- @echo ' installmandocs - install man pages generated by mandocs'
- @echo ' mandocs - man pages'
@echo ' pdfdocs - PDF'
@echo ' psdocs - Postscript'
@echo ' xmldocs - XML DocBook'
+ @echo ' mandocs - man pages'
+ @echo ' installmandocs - install man pages generated by mandocs'
+ @echo ' cleandocs - clean all generated DocBook files'
###
# Temporary files left by various tools
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
- $(C-procfs-example)
+ $(C-procfs-example) $(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
+cleandocs:
+ $(Q)rm -f $(call objectify, $(clean-files))
+ $(Q)rm -rf $(call objectify, $(clean-dirs))
+
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
!Edrivers/pci/pci.c
!Edrivers/pci/pci-driver.c
!Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
!Edrivers/pci/search.c
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
!Edrivers/pci/rom.c
!Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c
seriously wrong while debugging, it will most often be the case
that you want to enable gdb to be verbose about its target
communications. You do this prior to issuing the <constant>target
- remote</constant> command by typing in: <constant>set remote debug 1</constant>
+ remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
</chapter>
<chapter id="KGDBTestSuite">
iii. Plugging the queue to batch requests in anticipation of opportunities for
merge/sort optimizations
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
Plugging is an approach that the current i/o scheduling algorithm resorts to so
that it collects up enough requests in the queue to be able to take
advantage of the sorting/merging logic in the elevator. If the
queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
till it fills up with a few more requests, before starting to service
the requests. This provides an opportunity to merge/sort the requests before
passing them down to the device. There are various conditions when the queue is
unplugged (to open up the flow again), either through a scheduled task or
could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
Aside:
This is kind of controversial territory, as it's not clear if plugging is
multi-page bios being queued in one shot, we may not need to wait to merge
a big request from the broken up pieces coming by.
- Per-queue granularity unplugging (still a Todo) may help reduce some of the
- concerns with just a single tq_disk flush approach. Something like
- blk_kick_queue() to unplug a specific queue (right away ?)
- or optionally, all queues, is in the plan.
-
4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
process (bash) into it. CPU time consumed by this bash and its children
can be obtained from g1/cpuacct.usage and the same is accumulated in
/cgroups/cpuacct.usage also.
+
+cpuacct.stat file lists a few statistics which further divide the
+CPU time obtained by the cgroup into user and system times. Currently
+the following statistics are supported:
+
+user: Time spent by tasks of the cgroup in user mode.
+system: Time spent by tasks of the cgroup in kernel mode.
+
+user and system are in USER_HZ unit.
+
+cpuacct controller uses percpu_counter interface to collect user and
+system times. This has two side effects:
+
+- It is theoretically possible to see wrong values for user and system times.
+ This is because percpu_counter_read() on 32bit systems isn't safe
+ against concurrent writes.
+- It is possible to see slightly outdated values for user and system times
+ due to the batch processing nature of percpu_counter.
Salient features
-a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
+a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
+ Swap Cache memory pages.
b. The infrastructure allows easy addition of other types of memory to control
c. Provides *zero overhead* for non memory controller users
d. Provides a double LRU: global memory pressure causes reclaim from the
global LRU; a cgroup on hitting a limit, reclaims from the per
cgroup LRU
-NOTE: Swap Cache (unmapped) is not accounted now.
-
Benefits and Purpose of the memory controller
The memory controller isolates the memory behaviour of a group of tasks
moved to the parent. If you want to avoid that, force_empty will be useful.
5.2 stat file
- memory.stat file includes following statistics (now)
- cache - # of pages from page-cache and shmem.
- rss - # of pages from anonymous memory.
- pgpgin - # of event of charging
- pgpgout - # of event of uncharging
- active_anon - # of pages on active lru of anon, shmem.
- inactive_anon - # of pages on active lru of anon, shmem
- active_file - # of pages on active lru of file-cache
- inactive_file - # of pages on inactive lru of file cache
- unevictable - # of pages cannot be reclaimed.(mlocked etc)
-
- Below is depend on CONFIG_DEBUG_VM.
- inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
- recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
- recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
-
- Memo:
+
+memory.stat file includes following statistics
+
+cache - # of bytes of page cache memory.
+rss - # of bytes of anonymous and swap cache memory.
+pgpgin - # of pages paged in (equivalent to # of charging events).
+pgpgout - # of pages paged out (equivalent to # of uncharging events).
+active_anon - # of bytes of anonymous and swap cache memory on active
+ lru list.
+inactive_anon - # of bytes of anonymous memory and swap cache memory on
+ inactive lru list.
+active_file - # of bytes of file-backed memory on active lru list.
+inactive_file - # of bytes of file-backed memory on inactive lru list.
+unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc).
+
+The following additional stats are dependent on CONFIG_DEBUG_VM.
+
+inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
+recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
+
+Memo:
recent_rotated means recent frequency of lru rotation.
recent_scanned means recent # of scans to lru.
showing for better debug please see the code for meanings.
+Note:
+ Only anonymous and swap cache memory is listed as part of 'rss' stat.
+ This should not be confused with the true 'resident set size' or the
+ amount of physical memory used by the cgroup. Per-cgroup rss
+ accounting is not done yet.
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroup's swapiness can't be changed.
+ Following cgroups' swapiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.
2. Basic accounting routines
- a. void res_counter_init(struct res_counter *rc)
+ a. void res_counter_init(struct res_counter *rc,
+ struct res_counter *rc_parent)
Initializes the resource counter. As usual, should be the first
routine called for a new counter.
- b. int res_counter_charge[_locked]
- (struct res_counter *rc, unsigned long val)
+ The struct res_counter *parent can be used to define a hierarchical
+ child -> parent relationship directly in the res_counter structure,
+ NULL can be used to define no relationship.
+
+ c. int res_counter_charge(struct res_counter *rc, unsigned long val,
+ struct res_counter **limit_fail_at)
When a resource is about to be allocated it has to be accounted
with the appropriate resource counter (controller should determine
* if the charging is performed first, then it should be uncharged
on error path (if the one is called).
- c. void res_counter_uncharge[_locked]
+ If the charging fails and a hierarchical dependency exists, the
+ limit_fail_at parameter is set to the particular res_counter element
+ where the charging failed.
+
+ d. int res_counter_charge_locked
+ (struct res_counter *rc, unsigned long val)
+
+ The same as res_counter_charge(), but it must not acquire/release the
+ res_counter->lock internally (it must be called with res_counter->lock
+ held).
+
+ e. void res_counter_uncharge[_locked]
(struct res_counter *rc, unsigned long val)
When a resource is released (freed) it should be de-accounted
from the resource counter it was accounted to. This is called
"uncharging".
- The _locked routines imply that the res_counter->lock is taken.
-
+ The _locked routines imply that the res_counter->lock is taken.
2.1 Other accounting routines
be probed later if another device registers. (Which is OK, since
this interface is only for use with non-hotpluggable devices.)
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
After a reasonable transition period, we will remove the legacy
fakephp interface.
Who: Alex Chiang <achiang@hp.com>
+
+---------------------------
+
+What: i2c-voodoo3 driver
+When: October 2009
+Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
+ driver but this caused driver conflicts.
+Who: Jean Delvare <khali@linux-fr.org>
+ Krzysztof Helt <krzysztof.h1@wp.pl>
BKL mmap_sem PageLocked(page)
open: no yes
close: no yes
-fault: no yes
-page_mkwrite: no yes no
+fault: no yes can return with page locked
+page_mkwrite: no yes can return with page locked
access: no yes
- ->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+ ->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+ ->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through
==================
CacheFiles makes use of the split security in the task_struct. It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
when it acts on behalf of another process, in that process's context.
The reason it does this is that it calls vfs_mkdir() and suchlike rather than
the process looks like in /proc.
So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as). The
-objective security holds the intrinsic security properties of a process and is
-never overridden. This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden. This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).
data transfers.
POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
One can select any kernel supported cipher, encryption mode, hash type and operation mode
POHMELFS usage information.
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
idx=%u
Each mountpoint is associated with a special index via this option.
Administrator can add or remove servers from the given index, so all mounts,
Usage examples.
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
Mount filesystem with given index $idx to /mnt mountpoint.
Client will connect to all servers specified in the working set via previous command:
mount -t pohmel -o idx=$idx q /mnt
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
Server installation.
Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
- Hugh Dickins <hugh@veritas.com>, 4 June 2007
+ Hugh Dickins, 4 June 2007
unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
again.
- statfs: called when the VFS needs to get filesystem statistics. This
- is called with the kernel lock held
+ statfs: called when the VFS needs to get filesystem statistics.
remount_fs: called when the filesystem is remounted. This is called
with the kernel lock held
+++ /dev/null
- ftrace - Function Tracer
- ========================
-
-Copyright 2008 Red Hat Inc.
- Author: Steven Rostedt <srostedt@redhat.com>
- License: The GNU Free Documentation License, Version 1.2
- (dual licensed under the GPL v2)
-Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
- John Kacur, and David Teigland.
-
-Written for: 2.6.28-rc2
-
-Introduction
-------------
-
-Ftrace is an internal tracer designed to help out developers and
-designers of systems to find what is going on inside the kernel.
-It can be used for debugging or analyzing latencies and
-performance issues that take place outside of user-space.
-
-Although ftrace is the function tracer, it also includes an
-infrastructure that allows for other types of tracing. Some of
-the tracers that are currently in ftrace include a tracer to
-trace context switches, the time it takes for a high priority
-task to run after it was woken up, the time interrupts are
-disabled, and more (ftrace allows for tracer plugins, which
-means that the list of tracers can always grow).
-
-
-The File System
----------------
-
-Ftrace uses the debugfs file system to hold the control files as
-well as the files to display output.
-
-To mount the debugfs system:
-
- # mkdir /debug
- # mount -t debugfs nodev /debug
-
-( Note: it is more common to mount at /sys/kernel/debug, but for
- simplicity this document will use /debug)
-
-That's it! (assuming that you have ftrace configured into your kernel)
-
-After mounting the debugfs, you can see a directory called
-"tracing". This directory contains the control and output files
-of ftrace. Here is a list of some of the key files:
-
-
- Note: all time values are in microseconds.
-
- current_tracer:
-
- This is used to set or display the current tracer
- that is configured.
-
- available_tracers:
-
- This holds the different types of tracers that
- have been compiled into the kernel. The
- tracers listed here can be configured by
- echoing their name into current_tracer.
-
- tracing_enabled:
-
- This sets or displays whether the current_tracer
- is activated and tracing or not. Echo 0 into this
- file to disable the tracer or 1 to enable it.
-
- trace:
-
- This file holds the output of the trace in a human
- readable format (described below).
-
- latency_trace:
-
- This file shows the same trace but the information
- is organized more to display possible latencies
- in the system (described below).
-
- trace_pipe:
-
- The output is the same as the "trace" file but this
- file is meant to be streamed with live tracing.
- Reads from this file will block until new data
- is retrieved. Unlike the "trace" and "latency_trace"
- files, this file is a consumer. This means reading
- from this file causes sequential reads to display
- more current data. Once data is read from this
- file, it is consumed, and will not be read
- again with a sequential read. The "trace" and
- "latency_trace" files are static, and if the
- tracer is not adding more data, they will display
- the same information every time they are read.
-
- trace_options:
-
- This file lets the user control the amount of data
- that is displayed in one of the above output
- files.
-
- tracing_max_latency:
-
- Some of the tracers record the max latency.
- For example, the time interrupts are disabled.
- This time is saved in this file. The max trace
- will also be stored, and displayed by either
- "trace" or "latency_trace". A new max trace will
- only be recorded if the latency is greater than
- the value in this file. (in microseconds)
-
- buffer_size_kb:
-
- This sets or displays the number of kilobytes each CPU
- buffer can hold. The tracer buffers are the same size
- for each CPU. The displayed number is the size of the
- CPU buffer and not total size of all buffers. The
- trace buffers are allocated in pages (blocks of memory
- that the kernel uses for allocation, usually 4 KB in size).
- If the last page allocated has room for more bytes
- than requested, the rest of the page will be used,
- making the actual allocation bigger than requested.
- ( Note, the size may not be a multiple of the page size
- due to buffer managment overhead. )
-
- This can only be updated when the current_tracer
- is set to "nop".
-
- tracing_cpumask:
-
- This is a mask that lets the user only trace
- on specified CPUS. The format is a hex string
- representing the CPUS.
-
- set_ftrace_filter:
-
- When dynamic ftrace is configured in (see the
- section below "dynamic ftrace"), the code is dynamically
- modified (code text rewrite) to disable calling of the
- function profiler (mcount). This lets tracing be configured
- in with practically no overhead in performance. This also
- has a side effect of enabling or disabling specific functions
- to be traced. Echoing names of functions into this file
- will limit the trace to only those functions.
-
- set_ftrace_notrace:
-
- This has an effect opposite to that of
- set_ftrace_filter. Any function that is added here will not
- be traced. If a function exists in both set_ftrace_filter
- and set_ftrace_notrace, the function will _not_ be traced.
-
- set_ftrace_pid:
-
- Have the function tracer only trace a single thread.
-
- set_graph_function:
-
- Set a "trigger" function where tracing should start
- with the function graph tracer (See the section
- "dynamic ftrace" for more details).
-
- available_filter_functions:
-
- This lists the functions that ftrace
- has processed and can trace. These are the function
- names that you can pass to "set_ftrace_filter" or
- "set_ftrace_notrace". (See the section "dynamic ftrace"
- below for more details.)
-
-
-The Tracers
------------
-
-Here is the list of current tracers that may be configured.
-
- "function"
-
- Function call tracer to trace all kernel functions.
-
- "function_graph_tracer"
-
- Similar to the function tracer except that the
- function tracer probes the functions on their entry
- whereas the function graph tracer traces on both entry
- and exit of the functions. It then provides the ability
- to draw a graph of function calls similar to C code
- source.
-
- "sched_switch"
-
- Traces the context switches and wakeups between tasks.
-
- "irqsoff"
-
- Traces the areas that disable interrupts and saves
- the trace with the longest max latency.
- See tracing_max_latency. When a new max is recorded,
- it replaces the old trace. It is best to view this
- trace via the latency_trace file.
-
- "preemptoff"
-
- Similar to irqsoff but traces and records the amount of
- time for which preemption is disabled.
-
- "preemptirqsoff"
-
- Similar to irqsoff and preemptoff, but traces and
- records the largest time for which irqs and/or preemption
- is disabled.
-
- "wakeup"
-
- Traces and records the max latency that it takes for
- the highest priority task to get scheduled after
- it has been woken up.
-
- "hw-branch-tracer"
-
- Uses the BTS CPU feature on x86 CPUs to traces all
- branches executed.
-
- "nop"
-
- This is the "trace nothing" tracer. To remove all
- tracers from tracing simply echo "nop" into
- current_tracer.
-
-
-Examples of using the tracer
-----------------------------
-
-Here are typical examples of using the tracers when controlling
-them only with the debugfs interface (without using any
-user-land utilities).
-
-Output format:
---------------
-
-Here is an example of the output format of the file "trace"
-
- --------
-# tracer: function
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
- bash-4251 [01] 10152.583854: path_put <-path_walk
- bash-4251 [01] 10152.583855: dput <-path_put
- bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput
- --------
-
-A header is printed with the tracer name that is represented by
-the trace. In this case the tracer is "function". Then a header
-showing the format. Task name "bash", the task PID "4251", the
-CPU that it was running on "01", the timestamp in <secs>.<usecs>
-format, the function name that was traced "path_put" and the
-parent function that called this function "path_walk". The
-timestamp is the time at which the function was entered.
-
-The sched_switch tracer also includes tracing of task wakeups
-and context switches.
-
- ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S
- ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S
- ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R
- events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R
- kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R
- ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R
-
-Wake ups are represented by a "+" and the context switches are
-shown as "==>". The format is:
-
- Context switches:
-
- Previous task Next Task
-
- <pid>:<prio>:<state> ==> <pid>:<prio>:<state>
-
- Wake ups:
-
- Current task Task waking up
-
- <pid>:<prio>:<state> + <pid>:<prio>:<state>
-
-The prio is the internal kernel priority, which is the inverse
-of the priority that is usually displayed by user-space tools.
-Zero represents the highest priority (99). Prio 100 starts the
-"nice" priorities with 100 being equal to nice -20 and 139 being
-nice 19. The prio "140" is reserved for the idle task which is
-the lowest priority thread (pid 0).
-
-
-Latency trace format
---------------------
-
-For traces that display latency times, the latency_trace file
-gives somewhat more information to see why a latency happened.
-Here is a typical trace.
-
-# tracer: irqsoff
-#
-irqsoff latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: apic_timer_interrupt
- => ended at: do_softirq
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- <idle>-0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt)
- <idle>-0 0d.s. 97us : __do_softirq (do_softirq)
- <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq)
-
-
-This shows that the current tracer is "irqsoff" tracing the time
-for which interrupts were disabled. It gives the trace version
-and the version of the kernel upon which this was executed on
-(2.6.26-rc8). Then it displays the max latency in microsecs (97
-us). The number of trace entries displayed and the total number
-recorded (both are three: #3/3). The type of preemption that was
-used (PREEMPT). VP, KP, SP, and HP are always zero and are
-reserved for later use. #P is the number of online CPUS (#P:2).
-
-The task is the process that was running when the latency
-occurred. (swapper pid: 0).
-
-The start and stop (the functions in which the interrupts were
-disabled and enabled respectively) that caused the latencies:
-
- apic_timer_interrupt is where the interrupts were disabled.
- do_softirq is where they were enabled again.
-
-The next lines after the header are the trace itself. The header
-explains which is which.
-
- cmd: The name of the process in the trace.
-
- pid: The PID of that process.
-
- CPU#: The CPU which the process was running on.
-
- irqs-off: 'd' interrupts are disabled. '.' otherwise.
- Note: If the architecture does not support a way to
- read the irq flags variable, an 'X' will always
- be printed here.
-
- need-resched: 'N' task need_resched is set, '.' otherwise.
-
- hardirq/softirq:
- 'H' - hard irq occurred inside a softirq.
- 'h' - hard irq is running
- 's' - soft irq is running
- '.' - normal context.
-
- preempt-depth: The level of preempt_disabled
-
-The above is mostly meaningful for kernel developers.
-
- time: This differs from the trace file output. The trace file output
- includes an absolute timestamp. The timestamp used by the
- latency_trace file is relative to the start of the trace.
-
- delay: This is just to help catch your eye a bit better. And
- needs to be fixed to be only relative to the same CPU.
- The marks are determined by the difference between this
- current trace and the next trace.
- '!' - greater than preempt_mark_thresh (default 100)
- '+' - greater than 1 microsecond
- ' ' - less than or equal to 1 microsecond.
-
- The rest is the same as the 'trace' file.
-
-
-trace_options
--------------
-
-The trace_options file is used to control what gets printed in
-the trace output. To see what is available, simply cat the file:
-
- cat /debug/tracing/trace_options
- print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
- noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
-
-To disable one of the options, echo in the option prepended with
-"no".
-
- echo noprint-parent > /debug/tracing/trace_options
-
-To enable an option, leave off the "no".
-
- echo sym-offset > /debug/tracing/trace_options
-
-Here are the available options:
-
- print-parent - On function traces, display the calling (parent)
- function as well as the function being traced.
-
- print-parent:
- bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul
-
- noprint-parent:
- bash-4000 [01] 1477.606694: simple_strtoul
-
-
- sym-offset - Display not only the function name, but also the
- offset in the function. For example, instead of
- seeing just "ktime_get", you will see
- "ktime_get+0xb/0x20".
-
- sym-offset:
- bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0
-
- sym-addr - this will also display the function address as well
- as the function name.
-
- sym-addr:
- bash-4000 [01] 1477.606694: simple_strtoul <c0339346>
-
- verbose - This deals with the latency_trace file.
-
- bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
- (+0.000ms): simple_strtoul (strict_strtoul)
-
- raw - This will display raw numbers. This option is best for
- use with user applications that can translate the raw
- numbers better than having it done in the kernel.
-
- hex - Similar to raw, but the numbers will be in a hexadecimal
- format.
-
- bin - This will print out the formats in raw binary.
-
- block - TBD (needs update)
-
- stacktrace - This is one of the options that changes the trace
- itself. When a trace is recorded, so is the stack
- of functions. This allows for back traces of
- trace sites.
-
- userstacktrace - This option changes the trace. It records a
- stacktrace of the current userspace thread.
-
- sym-userobj - when user stacktrace are enabled, look up which
- object the address belongs to, and print a
- relative address. This is especially useful when
- ASLR is on, otherwise you don't get a chance to
- resolve the address to object/file/line after
- the app is no longer running
-
- The lookup is performed when you read
- trace,trace_pipe,latency_trace. Example:
-
- a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
-x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
-
- sched-tree - trace all tasks that are on the runqueue, at
- every scheduling event. Will add overhead if
- there's a lot of tasks running at once.
-
-
-sched_switch
-------------
-
-This tracer simply records schedule switches. Here is an example
-of how to use it.
-
- # echo sched_switch > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
- # sleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
-
-# tracer: sched_switch
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
- bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R
- bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R
- sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R
- bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S
- bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R
- sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R
- bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D
- bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R
- <idle>-0 [00] 240.132589: 0:140:R + 4:115:S
- <idle>-0 [00] 240.132591: 0:140:R ==> 4:115:R
- ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R
- <idle>-0 [00] 240.132598: 0:140:R + 4:115:S
- <idle>-0 [00] 240.132599: 0:140:R ==> 4:115:R
- ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R
- sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R
- [...]
-
-
-As we have discussed previously about this format, the header
-shows the name of the trace and points to the options. The
-"FUNCTION" is a misnomer since here it represents the wake ups
-and context switches.
-
-The sched_switch file only lists the wake ups (represented with
-'+') and context switches ('==>') with the previous task or
-current task first followed by the next task or task waking up.
-The format for both of these is PID:KERNEL-PRIO:TASK-STATE.
-Remember that the KERNEL-PRIO is the inverse of the actual
-priority with zero (0) being the highest priority and the nice
-values starting at 100 (nice -20). Below is a quick chart to map
-the kernel priority to user land priorities.
-
- Kernel priority: 0 to 99 ==> user RT priority 99 to 0
- Kernel priority: 100 to 139 ==> user nice -20 to 19
- Kernel priority: 140 ==> idle task priority
-
-The task states are:
-
- R - running : wants to run, may not actually be running
- S - sleep : process is waiting to be woken up (handles signals)
- D - disk sleep (uninterruptible sleep) : process must be woken up
- (ignores signals)
- T - stopped : process suspended
- t - traced : process is being traced (with something like gdb)
- Z - zombie : process waiting to be cleaned up
- X - unknown
-
-
-ftrace_enabled
---------------
-
-The following tracers (listed below) give different output
-depending on whether or not the sysctl ftrace_enabled is set. To
-set ftrace_enabled, one can either use the sysctl function or
-set it via the proc file system interface.
-
- sysctl kernel.ftrace_enabled=1
-
- or
-
- echo 1 > /proc/sys/kernel/ftrace_enabled
-
-To disable ftrace_enabled simply replace the '1' with '0' in the
-above commands.
-
-When ftrace_enabled is set the tracers will also record the
-functions that are within the trace. The descriptions of the
-tracers will also show an example with ftrace enabled.
-
-
-irqsoff
--------
-
-When interrupts are disabled, the CPU can not react to any other
-external event (besides NMIs and SMIs). This prevents the timer
-interrupt from triggering or the mouse interrupt from letting
-the kernel know of a new mouse event. The result is a latency
-with the reaction time.
-
-The irqsoff tracer tracks the time for which interrupts are
-disabled. When a new maximum latency is hit, the tracer saves
-the trace leading up to that latency point so that every time a
-new maximum is reached, the old saved trace is discarded and the
-new trace is saved.
-
-To reset the maximum, echo 0 into tracing_max_latency. Here is
-an example:
-
- # echo irqsoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
- # ls -ltr
- [...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
-# tracer: irqsoff
-#
-irqsoff latency trace v1.1.5 on 2.6.26
---------------------------------------------------------------------
- latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: sys_setpgid
- => ended at: sys_setpgid
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- bash-3730 1d... 0us : _write_lock_irq (sys_setpgid)
- bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid)
- bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid)
-
-
-Here we see that that we had a latency of 12 microsecs (which is
-very good). The _write_lock_irq in sys_setpgid disabled
-interrupts. The difference between the 12 and the displayed
-timestamp 14us occurred because the clock was incremented
-between the time of recording the max latency and the time of
-recording the function that had that latency.
-
-Note the above example had ftrace_enabled not set. If we set the
-ftrace_enabled, we get a much larger output:
-
-# tracer: irqsoff
-#
-irqsoff latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: __alloc_pages_internal
- => ended at: __alloc_pages_internal
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal)
- ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist)
- ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk)
- ls-4339 0d..1 4us : add_preempt_count (_spin_lock)
- ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk)
- ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue)
- ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest)
- ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk)
- ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue)
- ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest)
- ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk)
- ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue)
-[...]
- ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue)
- ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest)
- ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk)
- ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue)
- ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest)
- ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk)
- ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock)
- ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal)
- ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal)
-
-
-
-Here we traced a 50 microsecond latency. But we also see all the
-functions that were called during that time. Note that by
-enabling function tracing, we incur an added overhead. This
-overhead may extend the latency times. But nevertheless, this
-trace has provided some very helpful debugging information.
-
-
-preemptoff
-----------
-
-When preemption is disabled, we may be able to receive
-interrupts but the task cannot be preempted and a higher
-priority task must wait for preemption to be enabled again
-before it can preempt a lower priority task.
-
-The preemptoff tracer traces the places that disable preemption.
-Like the irqsoff tracer, it records the maximum latency for
-which preemption was disabled. The control of preemptoff tracer
-is much like the irqsoff tracer.
-
- # echo preemptoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
- # ls -ltr
- [...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
-# tracer: preemptoff
-#
-preemptoff latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: do_IRQ
- => ended at: __do_softirq
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- sshd-4261 0d.h. 0us+: irq_enter (do_IRQ)
- sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq)
- sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq)
-
-
-This has some more changes. Preemption was disabled when an
-interrupt came in (notice the 'h'), and was enabled while doing
-a softirq. (notice the 's'). But we also see that interrupts
-have been disabled when entering the preempt off section and
-leaving it (the 'd'). We do not know if interrupts were enabled
-in the mean time.
-
-# tracer: preemptoff
-#
-preemptoff latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: remove_wait_queue
- => ended at: __do_softirq
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue)
- sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue)
- sshd-4261 0d..1 2us : do_IRQ (common_interrupt)
- sshd-4261 0d..1 2us : irq_enter (do_IRQ)
- sshd-4261 0d..1 2us : idle_cpu (irq_enter)
- sshd-4261 0d..1 3us : add_preempt_count (irq_enter)
- sshd-4261 0d.h1 3us : idle_cpu (irq_enter)
- sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ)
-[...]
- sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock)
- sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq)
- sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq)
- sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq)
- sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock)
- sshd-4261 0d.h1 14us : irq_exit (do_IRQ)
- sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit)
- sshd-4261 0d..2 15us : do_softirq (irq_exit)
- sshd-4261 0d... 15us : __do_softirq (do_softirq)
- sshd-4261 0d... 16us : __local_bh_disable (__do_softirq)
- sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable)
- sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable)
- sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable)
- sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable)
-[...]
- sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable)
- sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable)
- sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable)
- sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable)
- sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip)
- sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip)
- sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable)
- sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable)
-[...]
- sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq)
- sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq)
-
-
-The above is an example of the preemptoff trace with
-ftrace_enabled set. Here we see that interrupts were disabled
-the entire time. The irq_enter code lets us know that we entered
-an interrupt 'h'. Before that, the functions being traced still
-show that it is not in an interrupt, but we can see from the
-functions themselves that this is not the case.
-
-Notice that __do_softirq when called does not have a
-preempt_count. It may seem that we missed a preempt enabling.
-What really happened is that the preempt count is held on the
-thread's stack and we switched to the softirq stack (4K stacks
-in effect). The code does not copy the preempt count, but
-because interrupts are disabled, we do not need to worry about
-it. Having a tracer like this is good for letting people know
-what really happens inside the kernel.
-
-
-preemptirqsoff
---------------
-
-Knowing the locations that have interrupts disabled or
-preemption disabled for the longest times is helpful. But
-sometimes we would like to know when either preemption and/or
-interrupts are disabled.
-
-Consider the following code:
-
- local_irq_disable();
- call_function_with_irqs_off();
- preempt_disable();
- call_function_with_irqs_and_preemption_off();
- local_irq_enable();
- call_function_with_preemption_off();
- preempt_enable();
-
-The irqsoff tracer will record the total length of
-call_function_with_irqs_off() and
-call_function_with_irqs_and_preemption_off().
-
-The preemptoff tracer will record the total length of
-call_function_with_irqs_and_preemption_off() and
-call_function_with_preemption_off().
-
-But neither will trace the time that interrupts and/or
-preemption is disabled. This total time is the time that we can
-not schedule. To record this time, use the preemptirqsoff
-tracer.
-
-Again, using this trace is much like the irqsoff and preemptoff
-tracers.
-
- # echo preemptirqsoff > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
- # ls -ltr
- [...]
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
-# tracer: preemptirqsoff
-#
-preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: apic_timer_interrupt
- => ended at: __do_softirq
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt)
- ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq)
- ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq)
-
-
-
-The trace_hardirqs_off_thunk is called from assembly on x86 when
-interrupts are disabled in the assembly code. Without the
-function tracing, we do not know if interrupts were enabled
-within the preemption points. We do see that it started with
-preemption enabled.
-
-Here is a trace with ftrace_enabled set:
-
-
-# tracer: preemptirqsoff
-#
-preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
- -----------------
- => started at: write_chan
- => ended at: __do_softirq
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- ls-4473 0.N.. 0us : preempt_schedule (write_chan)
- ls-4473 0dN.1 1us : _spin_lock (schedule)
- ls-4473 0dN.1 2us : add_preempt_count (_spin_lock)
- ls-4473 0d..2 2us : put_prev_task_fair (schedule)
-[...]
- ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts)
- ls-4473 0d..2 13us : __switch_to (schedule)
- sshd-4261 0d..2 14us : finish_task_switch (schedule)
- sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch)
- sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave)
- sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set)
- sshd-4261 0d..2 16us : do_IRQ (common_interrupt)
- sshd-4261 0d..2 17us : irq_enter (do_IRQ)
- sshd-4261 0d..2 17us : idle_cpu (irq_enter)
- sshd-4261 0d..2 18us : add_preempt_count (irq_enter)
- sshd-4261 0d.h2 18us : idle_cpu (irq_enter)
- sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ)
- sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq)
- sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock)
- sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq)
- sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock)
-[...]
- sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq)
- sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock)
- sshd-4261 0d.h2 29us : irq_exit (do_IRQ)
- sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit)
- sshd-4261 0d..3 30us : do_softirq (irq_exit)
- sshd-4261 0d... 30us : __do_softirq (do_softirq)
- sshd-4261 0d... 31us : __local_bh_disable (__do_softirq)
- sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable)
- sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable)
-[...]
- sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip)
- sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip)
- sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt)
- sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt)
- sshd-4261 0d.s3 45us : idle_cpu (irq_enter)
- sshd-4261 0d.s3 46us : add_preempt_count (irq_enter)
- sshd-4261 0d.H3 46us : idle_cpu (irq_enter)
- sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt)
- sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt)
-[...]
- sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt)
- sshd-4261 0d.H3 82us : ktime_get (tick_program_event)
- sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get)
- sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts)
- sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts)
- sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event)
- sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event)
- sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt)
- sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit)
- sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit)
- sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable)
-[...]
- sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action)
- sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq)
- sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq)
- sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq)
- sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable)
- sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq)
- sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq)
-
-
-This is a very interesting trace. It started with the preemption
-of the ls task. We see that the task had the "need_resched" bit
-set via the 'N' in the trace. Interrupts were disabled before
-the spin_lock at the beginning of the trace. We see that a
-schedule took place to run sshd. When the interrupts were
-enabled, we took an interrupt. On return from the interrupt
-handler, the softirq ran. We took another interrupt while
-running the softirq as we see from the capital 'H'.
-
-
-wakeup
-------
-
-In a Real-Time environment it is very important to know the
-wakeup time it takes for the highest priority task that is woken
-up to the time that it executes. This is also known as "schedule
-latency". I stress the point that this is about RT tasks. It is
-also important to know the scheduling latency of non-RT tasks,
-but the average schedule latency is better for non-RT tasks.
-Tools like LatencyTop are more appropriate for such
-measurements.
-
-Real-Time environments are interested in the worst case latency.
-That is the longest latency it takes for something to happen,
-and not the average. We can have a very fast scheduler that may
-only have a large latency once in a while, but that would not
-work well with Real-Time tasks. The wakeup tracer was designed
-to record the worst case wakeups of RT tasks. Non-RT tasks are
-not recorded because the tracer only records one worst case and
-tracing non-RT tasks that are unpredictable will overwrite the
-worst case latency of RT tasks.
-
-Since this tracer only deals with RT tasks, we will run this
-slightly differently than we did with the previous tracers.
-Instead of performing an 'ls', we will run 'sleep 1' under
-'chrt' which changes the priority of the task.
-
- # echo wakeup > /debug/tracing/current_tracer
- # echo 0 > /debug/tracing/tracing_max_latency
- # echo 1 > /debug/tracing/tracing_enabled
- # chrt -f 5 sleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/latency_trace
-# tracer: wakeup
-#
-wakeup latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5)
- -----------------
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
- <idle>-0 1d.h4 0us+: try_to_wake_up (wake_up_process)
- <idle>-0 1d..4 4us : schedule (cpu_idle)
-
-
-Running this on an idle system, we see that it only took 4
-microseconds to perform the task switch. Note, since the trace
-marker in the schedule is before the actual "switch", we stop
-the tracing when the recorded task is about to schedule in. This
-may change if we add a new marker at the end of the scheduler.
-
-Notice that the recorded task is 'sleep' with the PID of 4901
-and it has an rt_prio of 5. This priority is user-space priority
-and not the internal kernel priority. The policy is 1 for
-SCHED_FIFO and 2 for SCHED_RR.
-
-Doing the same with chrt -r 5 and ftrace_enabled set.
-
-# tracer: wakeup
-#
-wakeup latency trace v1.1.5 on 2.6.26-rc8
---------------------------------------------------------------------
- latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
- -----------------
- | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5)
- -----------------
-
-# _------=> CPU#
-# / _-----=> irqs-off
-# | / _----=> need-resched
-# || / _---=> hardirq/softirq
-# ||| / _--=> preempt-depth
-# |||| /
-# ||||| delay
-# cmd pid ||||| time | caller
-# \ / ||||| \ | /
-ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process)
-ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb)
-ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up)
-ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup)
-ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr)
-ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup)
-ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up)
-ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up)
-[...]
-ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt)
-ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit)
-ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit)
-ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq)
-[...]
-ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks)
-ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq)
-ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable)
-ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd)
-ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd)
-ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched)
-ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched)
-ksoftirq-7 1.N.2 33us : schedule (__cond_resched)
-ksoftirq-7 1.N.2 33us : add_preempt_count (schedule)
-ksoftirq-7 1.N.3 34us : hrtick_clear (schedule)
-ksoftirq-7 1dN.3 35us : _spin_lock (schedule)
-ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock)
-ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule)
-ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair)
-[...]
-ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline)
-ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock)
-ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline)
-ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock)
-ksoftirq-7 1d..4 50us : schedule (__cond_resched)
-
-The interrupt went off while running ksoftirqd. This task runs
-at SCHED_OTHER. Why did not we see the 'N' set early? This may
-be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K
-stacks configured, the interrupt and softirq run with their own
-stack. Some information is held on the top of the task's stack
-(need_resched and preempt_count are both stored there). The
-setting of the NEED_RESCHED bit is done directly to the task's
-stack, but the reading of the NEED_RESCHED is done by looking at
-the current stack, which in this case is the stack for the hard
-interrupt. This hides the fact that NEED_RESCHED has been set.
-We do not see the 'N' until we switch back to the task's
-assigned stack.
-
-function
---------
-
-This tracer is the function tracer. Enabling the function tracer
-can be done from the debug file system. Make sure the
-ftrace_enabled is set; otherwise this tracer is a nop.
-
- # sysctl kernel.ftrace_enabled=1
- # echo function > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
- # usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
-# tracer: function
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
- bash-4003 [00] 123.638713: finish_task_switch <-schedule
- bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch
- bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq
- bash-4003 [00] 123.638715: hrtick_set <-schedule
- bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set
- bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave
- bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set
- bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore
- bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set
- bash-4003 [00] 123.638718: sub_preempt_count <-schedule
- bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule
- bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run
- bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion
- bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common
- bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq
-[...]
-
-
-Note: function tracer uses ring buffers to store the above
-entries. The newest data may overwrite the oldest data.
-Sometimes using echo to stop the trace is not sufficient because
-the tracing could have overwritten the data that you wanted to
-record. For this reason, it is sometimes better to disable
-tracing directly from a program. This allows you to stop the
-tracing at the point that you hit the part that you are
-interested in. To disable the tracing directly from a C program,
-something like following code snippet can be used:
-
-int trace_fd;
-[...]
-int main(int argc, char *argv[]) {
- [...]
- trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
- [...]
- if (condition_hit()) {
- write(trace_fd, "0", 1);
- }
- [...]
-}
-
-Note: Here we hard coded the path name. The debugfs mount is not
-guaranteed to be at /debug (and is more commonly at
-/sys/kernel/debug). For simple one time traces, the above is
-sufficent. For anything else, a search through /proc/mounts may
-be needed to find where the debugfs file-system is mounted.
-
-
-Single thread tracing
----------------------
-
-By writing into /debug/tracing/set_ftrace_pid you can trace a
-single thread. For example:
-
-# cat /debug/tracing/set_ftrace_pid
-no pid
-# echo 3111 > /debug/tracing/set_ftrace_pid
-# cat /debug/tracing/set_ftrace_pid
-3111
-# echo function > /debug/tracing/current_tracer
-# cat /debug/tracing/trace | head
- # tracer: function
- #
- # TASK-PID CPU# TIMESTAMP FUNCTION
- # | | | | |
- yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return
- yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range
- yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel
- yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
- yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
- yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
-# echo -1 > /debug/tracing/set_ftrace_pid
-# cat /debug/tracing/trace |head
- # tracer: function
- #
- # TASK-PID CPU# TIMESTAMP FUNCTION
- # | | | | |
- ##### CPU 3 buffer started ####
- yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait
- yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry
- yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry
- yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit
- yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit
-
-If you want to trace a function when executing, you could use
-something like this simple program:
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-int main (int argc, char **argv)
-{
- if (argc < 1)
- exit(-1);
-
- if (fork() > 0) {
- int fd, ffd;
- char line[64];
- int s;
-
- ffd = open("/debug/tracing/current_tracer", O_WRONLY);
- if (ffd < 0)
- exit(-1);
- write(ffd, "nop", 3);
-
- fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
- s = sprintf(line, "%d\n", getpid());
- write(fd, line, s);
-
- write(ffd, "function", 8);
-
- close(fd);
- close(ffd);
-
- execvp(argv[1], argv+1);
- }
-
- return 0;
-}
-
-
-hw-branch-tracer (x86 only)
----------------------------
-
-This tracer uses the x86 last branch tracing hardware feature to
-collect a branch trace on all cpus with relatively low overhead.
-
-The tracer uses a fixed-size circular buffer per cpu and only
-traces ring 0 branches. The trace file dumps that buffer in the
-following format:
-
-# tracer: hw-branch-tracer
-#
-# CPU# TO <- FROM
- 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6
- 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a
- 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf
- 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf
- 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a
- 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf
-
-
-The tracer may be used to dump the trace for the oops'ing cpu on
-a kernel oops into the system log. To enable this,
-ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one
-can either use the sysctl function or set it via the proc system
-interface.
-
- sysctl kernel.ftrace_dump_on_oops=1
-
-or
-
- echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
-
-
-Here's an example of such a dump after a null pointer
-dereference in a kernel module:
-
-[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
-[57848.106019] IP: [<ffffffffa0000006>] open+0x6/0x14 [oops]
-[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0
-[57848.106019] Oops: 0002 [#1] SMP
-[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus
-[57848.106019] Dumping ftrace buffer:
-[57848.106019] ---------------------------------
-[...]
-[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24
-[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165
-[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165
-[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165
-[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165
-[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops]
-[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30
-[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b
-[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31
-[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1
-[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30
-[...]
-[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2
-[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881
-[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881
-[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96
-[...]
-[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3
-[57848.106019] ---------------------------------
-[57848.106019] CPU 0
-[57848.106019] Modules linked in: oops
-[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23
-[57848.106019] RIP: 0010:[<ffffffffa0000006>] [<ffffffffa0000006>] open+0x6/0x14 [oops]
-[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246
-[...]
-
-
-function graph tracer
----------------------------
-
-This tracer is similar to the function tracer except that it
-probes a function on its entry and its exit. This is done by
-using a dynamically allocated stack of return addresses in each
-task_struct. On function entry the tracer overwrites the return
-address of each function traced to set a custom probe. Thus the
-original return address is stored on the stack of return address
-in the task_struct.
-
-Probing on both ends of a function leads to special features
-such as:
-
-- measure of a function's time execution
-- having a reliable call stack to draw function calls graph
-
-This tracer is useful in several situations:
-
-- you want to find the reason of a strange kernel behavior and
- need to see what happens in detail on any areas (or specific
- ones).
-
-- you are experiencing weird latencies but it's difficult to
- find its origin.
-
-- you want to find quickly which path is taken by a specific
- function
-
-- you just want to peek inside a working kernel and want to see
- what happens there.
-
-# tracer: function_graph
-#
-# CPU DURATION FUNCTION CALLS
-# | | | | | | |
-
- 0) | sys_open() {
- 0) | do_sys_open() {
- 0) | getname() {
- 0) | kmem_cache_alloc() {
- 0) 1.382 us | __might_sleep();
- 0) 2.478 us | }
- 0) | strncpy_from_user() {
- 0) | might_fault() {
- 0) 1.389 us | __might_sleep();
- 0) 2.553 us | }
- 0) 3.807 us | }
- 0) 7.876 us | }
- 0) | alloc_fd() {
- 0) 0.668 us | _spin_lock();
- 0) 0.570 us | expand_files();
- 0) 0.586 us | _spin_unlock();
-
-
-There are several columns that can be dynamically
-enabled/disabled. You can use every combination of options you
-want, depending on your needs.
-
-- The cpu number on which the function executed is default
- enabled. It is sometimes better to only trace one cpu (see
- tracing_cpu_mask file) or you might sometimes see unordered
- function calls while cpu tracing switch.
-
- hide: echo nofuncgraph-cpu > /debug/tracing/trace_options
- show: echo funcgraph-cpu > /debug/tracing/trace_options
-
-- The duration (function's time of execution) is displayed on
- the closing bracket line of a function or on the same line
- than the current function in case of a leaf one. It is default
- enabled.
-
- hide: echo nofuncgraph-duration > /debug/tracing/trace_options
- show: echo funcgraph-duration > /debug/tracing/trace_options
-
-- The overhead field precedes the duration field in case of
- reached duration thresholds.
-
- hide: echo nofuncgraph-overhead > /debug/tracing/trace_options
- show: echo funcgraph-overhead > /debug/tracing/trace_options
- depends on: funcgraph-duration
-
- ie:
-
- 0) | up_write() {
- 0) 0.646 us | _spin_lock_irqsave();
- 0) 0.684 us | _spin_unlock_irqrestore();
- 0) 3.123 us | }
- 0) 0.548 us | fput();
- 0) + 58.628 us | }
-
- [...]
-
- 0) | putname() {
- 0) | kmem_cache_free() {
- 0) 0.518 us | __phys_addr();
- 0) 1.757 us | }
- 0) 2.861 us | }
- 0) ! 115.305 us | }
- 0) ! 116.402 us | }
-
- + means that the function exceeded 10 usecs.
- ! means that the function exceeded 100 usecs.
-
-
-- The task/pid field displays the thread cmdline and pid which
- executed the function. It is default disabled.
-
- hide: echo nofuncgraph-proc > /debug/tracing/trace_options
- show: echo funcgraph-proc > /debug/tracing/trace_options
-
- ie:
-
- # tracer: function_graph
- #
- # CPU TASK/PID DURATION FUNCTION CALLS
- # | | | | | | | | |
- 0) sh-4802 | | d_free() {
- 0) sh-4802 | | call_rcu() {
- 0) sh-4802 | | __call_rcu() {
- 0) sh-4802 | 0.616 us | rcu_process_gp_end();
- 0) sh-4802 | 0.586 us | check_for_new_grace_period();
- 0) sh-4802 | 2.899 us | }
- 0) sh-4802 | 4.040 us | }
- 0) sh-4802 | 5.151 us | }
- 0) sh-4802 | + 49.370 us | }
-
-
-- The absolute time field is an absolute timestamp given by the
- system clock since it started. A snapshot of this time is
- given on each entry/exit of functions
-
- hide: echo nofuncgraph-abstime > /debug/tracing/trace_options
- show: echo funcgraph-abstime > /debug/tracing/trace_options
-
- ie:
-
- #
- # TIME CPU DURATION FUNCTION CALLS
- # | | | | | | | |
- 360.774522 | 1) 0.541 us | }
- 360.774522 | 1) 4.663 us | }
- 360.774523 | 1) 0.541 us | __wake_up_bit();
- 360.774524 | 1) 6.796 us | }
- 360.774524 | 1) 7.952 us | }
- 360.774525 | 1) 9.063 us | }
- 360.774525 | 1) 0.615 us | journal_mark_dirty();
- 360.774527 | 1) 0.578 us | __brelse();
- 360.774528 | 1) | reiserfs_prepare_for_journal() {
- 360.774528 | 1) | unlock_buffer() {
- 360.774529 | 1) | wake_up_bit() {
- 360.774529 | 1) | bit_waitqueue() {
- 360.774530 | 1) 0.594 us | __phys_addr();
-
-
-You can put some comments on specific functions by using
-trace_printk() For example, if you want to put a comment inside
-the __might_sleep() function, you just have to include
-<linux/ftrace.h> and call trace_printk() inside __might_sleep()
-
-trace_printk("I'm a comment!\n")
-
-will produce:
-
- 1) | __might_sleep() {
- 1) | /* I'm a comment! */
- 1) 1.449 us | }
-
-
-You might find other useful features for this tracer in the
-following "dynamic ftrace" section such as tracing only specific
-functions or tasks.
-
-dynamic ftrace
---------------
-
-If CONFIG_DYNAMIC_FTRACE is set, the system will run with
-virtually no overhead when function tracing is disabled. The way
-this works is the mcount function call (placed at the start of
-every kernel function, produced by the -pg switch in gcc),
-starts of pointing to a simple return. (Enabling FTRACE will
-include the -pg switch in the compiling of the kernel.)
-
-At compile time every C file object is run through the
-recordmcount.pl script (located in the scripts directory). This
-script will process the C object using objdump to find all the
-locations in the .text section that call mcount. (Note, only the
-.text section is processed, since processing other sections like
-.init.text may cause races due to those sections being freed).
-
-A new section called "__mcount_loc" is created that holds
-references to all the mcount call sites in the .text section.
-This section is compiled back into the original object. The
-final linker will add all these references into a single table.
-
-On boot up, before SMP is initialized, the dynamic ftrace code
-scans this table and updates all the locations into nops. It
-also records the locations, which are added to the
-available_filter_functions list. Modules are processed as they
-are loaded and before they are executed. When a module is
-unloaded, it also removes its functions from the ftrace function
-list. This is automatic in the module unload code, and the
-module author does not need to worry about it.
-
-When tracing is enabled, kstop_machine is called to prevent
-races with the CPUS executing code being modified (which can
-cause the CPU to do undesireable things), and the nops are
-patched back to calls. But this time, they do not call mcount
-(which is just a function stub). They now call into the ftrace
-infrastructure.
-
-One special side-effect to the recording of the functions being
-traced is that we can now selectively choose which functions we
-wish to trace and which ones we want the mcount calls to remain
-as nops.
-
-Two files are used, one for enabling and one for disabling the
-tracing of specified functions. They are:
-
- set_ftrace_filter
-
-and
-
- set_ftrace_notrace
-
-A list of available functions that you can add to these files is
-listed in:
-
- available_filter_functions
-
- # cat /debug/tracing/available_filter_functions
-put_prev_task_idle
-kmem_cache_create
-pick_next_task_rt
-get_online_cpus
-pick_next_task_fair
-mutex_lock
-[...]
-
-If I am only interested in sys_nanosleep and hrtimer_interrupt:
-
- # echo sys_nanosleep hrtimer_interrupt \
- > /debug/tracing/set_ftrace_filter
- # echo ftrace > /debug/tracing/current_tracer
- # echo 1 > /debug/tracing/tracing_enabled
- # usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
-# tracer: ftrace
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
- usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt
- usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call
- <idle>-0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt
-
-To see which functions are being traced, you can cat the file:
-
- # cat /debug/tracing/set_ftrace_filter
-hrtimer_interrupt
-sys_nanosleep
-
-
-Perhaps this is not enough. The filters also allow simple wild
-cards. Only the following are currently available
-
- <match>* - will match functions that begin with <match>
- *<match> - will match functions that end with <match>
- *<match>* - will match functions that have <match> in it
-
-These are the only wild cards which are supported.
-
- <match>*<match> will not work.
-
-Note: It is better to use quotes to enclose the wild cards,
- otherwise the shell may expand the parameters into names
- of files in the local directory.
-
- # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
-
-Produces:
-
-# tracer: ftrace
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
- bash-4003 [00] 1480.611794: hrtimer_init <-copy_process
- bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set
- bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear
- bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel
- <idle>-0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt
- <idle>-0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt
- <idle>-0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt
- <idle>-0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt
- <idle>-0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt
-
-
-Notice that we lost the sys_nanosleep.
-
- # cat /debug/tracing/set_ftrace_filter
-hrtimer_run_queues
-hrtimer_run_pending
-hrtimer_init
-hrtimer_cancel
-hrtimer_try_to_cancel
-hrtimer_forward
-hrtimer_start
-hrtimer_reprogram
-hrtimer_force_reprogram
-hrtimer_get_next_event
-hrtimer_interrupt
-hrtimer_nanosleep
-hrtimer_wakeup
-hrtimer_get_remaining
-hrtimer_get_res
-hrtimer_init_sleeper
-
-
-This is because the '>' and '>>' act just like they do in bash.
-To rewrite the filters, use '>'
-To append to the filters, use '>>'
-
-To clear out a filter so that all functions will be recorded
-again:
-
- # echo > /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
- #
-
-Again, now we want to append.
-
- # echo sys_nanosleep > /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
-sys_nanosleep
- # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
- # cat /debug/tracing/set_ftrace_filter
-hrtimer_run_queues
-hrtimer_run_pending
-hrtimer_init
-hrtimer_cancel
-hrtimer_try_to_cancel
-hrtimer_forward
-hrtimer_start
-hrtimer_reprogram
-hrtimer_force_reprogram
-hrtimer_get_next_event
-hrtimer_interrupt
-sys_nanosleep
-hrtimer_nanosleep
-hrtimer_wakeup
-hrtimer_get_remaining
-hrtimer_get_res
-hrtimer_init_sleeper
-
-
-The set_ftrace_notrace prevents those functions from being
-traced.
-
- # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
-
-Produces:
-
-# tracer: ftrace
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
- bash-4043 [01] 115.281644: finish_task_switch <-schedule
- bash-4043 [01] 115.281645: hrtick_set <-schedule
- bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set
- bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run
- bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion
- bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run
- bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop
- bash-4043 [01] 115.281648: wake_up_process <-kthread_stop
- bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process
-
-We can see that there's no more lock or preempt tracing.
-
-
-Dynamic ftrace with the function graph tracer
----------------------------------------------
-
-Although what has been explained above concerns both the
-function tracer and the function-graph-tracer, there are some
-special features only available in the function-graph tracer.
-
-If you want to trace only one function and all of its children,
-you just have to echo its name into set_graph_function:
-
- echo __do_fault > set_graph_function
-
-will produce the following "expanded" trace of the __do_fault()
-function:
-
- 0) | __do_fault() {
- 0) | filemap_fault() {
- 0) | find_lock_page() {
- 0) 0.804 us | find_get_page();
- 0) | __might_sleep() {
- 0) 1.329 us | }
- 0) 3.904 us | }
- 0) 4.979 us | }
- 0) 0.653 us | _spin_lock();
- 0) 0.578 us | page_add_file_rmap();
- 0) 0.525 us | native_set_pte_at();
- 0) 0.585 us | _spin_unlock();
- 0) | unlock_page() {
- 0) 0.541 us | page_waitqueue();
- 0) 0.639 us | __wake_up_bit();
- 0) 2.786 us | }
- 0) + 14.237 us | }
- 0) | __do_fault() {
- 0) | filemap_fault() {
- 0) | find_lock_page() {
- 0) 0.698 us | find_get_page();
- 0) | __might_sleep() {
- 0) 1.412 us | }
- 0) 3.950 us | }
- 0) 5.098 us | }
- 0) 0.631 us | _spin_lock();
- 0) 0.571 us | page_add_file_rmap();
- 0) 0.526 us | native_set_pte_at();
- 0) 0.586 us | _spin_unlock();
- 0) | unlock_page() {
- 0) 0.533 us | page_waitqueue();
- 0) 0.638 us | __wake_up_bit();
- 0) 2.793 us | }
- 0) + 14.012 us | }
-
-You can also expand several functions at once:
-
- echo sys_open > set_graph_function
- echo sys_close >> set_graph_function
-
-Now if you want to go back to trace all functions you can clear
-this special filter via:
-
- echo > set_graph_function
-
-
-trace_pipe
-----------
-
-The trace_pipe outputs the same content as the trace file, but
-the effect on the tracing is different. Every read from
-trace_pipe is consumed. This means that subsequent reads will be
-different. The trace is live.
-
- # echo function > /debug/tracing/current_tracer
- # cat /debug/tracing/trace_pipe > /tmp/trace.out &
-[1] 4153
- # echo 1 > /debug/tracing/tracing_enabled
- # usleep 1
- # echo 0 > /debug/tracing/tracing_enabled
- # cat /debug/tracing/trace
-# tracer: function
-#
-# TASK-PID CPU# TIMESTAMP FUNCTION
-# | | | | |
-
- #
- # cat /tmp/trace.out
- bash-4043 [00] 41.267106: finish_task_switch <-schedule
- bash-4043 [00] 41.267106: hrtick_set <-schedule
- bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set
- bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run
- bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion
- bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run
- bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop
- bash-4043 [00] 41.267110: wake_up_process <-kthread_stop
- bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process
- bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up
-
-
-Note, reading the trace_pipe file will block until more input is
-added. By changing the tracer, trace_pipe will issue an EOF. We
-needed to set the function tracer _before_ we "cat" the
-trace_pipe file.
-
-
-trace entries
--------------
-
-Having too much or not enough data can be troublesome in
-diagnosing an issue in the kernel. The file buffer_size_kb is
-used to modify the size of the internal trace buffers. The
-number listed is the number of entries that can be recorded per
-CPU. To know the full size, multiply the number of possible CPUS
-with the number of entries.
-
- # cat /debug/tracing/buffer_size_kb
-1408 (units kilobytes)
-
-Note, to modify this, you must have tracing completely disabled.
-To do that, echo "nop" into the current_tracer. If the
-current_tracer is not set to "nop", an EINVAL error will be
-returned.
-
- # echo nop > /debug/tracing/current_tracer
- # echo 10000 > /debug/tracing/buffer_size_kb
- # cat /debug/tracing/buffer_size_kb
-10000 (units kilobytes)
-
-The number of pages which will be allocated is limited to a
-percentage of available memory. Allocating too much will produce
-an error.
-
- # echo 1000000000000 > /debug/tracing/buffer_size_kb
--bash: echo: write error: Cannot allocate memory
- # cat /debug/tracing/buffer_size_kb
-85
-
------------
-
-More details can be found in the source code, in the
-kernel/tracing/*.c files.
Unit: revolution/min (RPM)
RW
+fan[1-*]_max Fan maximum value
+ Unit: revolution/min (RPM)
+ Only rarely supported by the hardware.
+ RW
+
fan[1-*]_input Fan input value.
Unit: revolution/min (RPM)
RO
in[0-*]_min_alarm
in[0-*]_max_alarm
fan[1-*]_min_alarm
+fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm
The P_Key for any interface is given by the "pkey" file, and the
main interface for a subinterface is in "parent."
+Datagram vs Connected modes
+
+ The IPoIB driver supports two modes of operation: datagram and
+ connected. The mode is set and read through an interface's
+ /sys/class/net/<intf name>/mode file.
+
+ In datagram mode, the IB UD (Unreliable Datagram) transport is used
+ and so the interface MTU has is equal to the IB L2 MTU minus the
+ IPoIB encapsulation header (4 bytes). For example, in a typical IB
+ fabric with a 2K MTU, the IPoIB MTU will be 2048 - 4 = 2044 bytes.
+
+ In connected mode, the IB RC (Reliable Connected) transport is used.
+ Connected mode is to takes advantage of the connected nature of the
+ IB transport and allows an MTU up to the maximal IP packet size of
+ 64K, which reduces the number of IP packets needed for handling
+ large UDP datagrams, TCP segments, etc and increases the performance
+ for large messages.
+
+ In connected mode, the interface's UD QP is still used for multicast
+ and communication with peers that don't support connected mode. In
+ this case, RX emulation of ICMP PMTU packets is used to cause the
+ networking stack to use the smaller UD MTU for these neighbours.
+
+Stateless offloads
+
+ If the IB HW supports IPoIB stateless offloads, IPoIB advertises
+ TCP/IP checksum and/or Large Send (LSO) offloading capability to the
+ network stack.
+
+ Large Receive (LRO) offloading is also implemented and may be turned
+ on/off using ethtool calls. Currently LRO is supported only for
+ checksum offload capable devices.
+
+ Stateless offloads are supported only in datagram mode.
+
+Interrupt moderation
+
+ If the underlying IB device supports CQ event moderation, one can
+ use ethtool to set interrupt mitigation parameters and thus reduce
+ the overhead incurred by handling interrupts. The main code path of
+ IPoIB doesn't use events for TX completion signaling so only RX
+ moderation is supported.
+
Debugging Information
By compiling the IPoIB driver with CONFIG_INFINIBAND_IPOIB_DEBUG set
http://ietf.org/rfc/rfc4391.txt
IP over InfiniBand (IPoIB) Architecture (RFC 4392)
http://ietf.org/rfc/rfc4392.txt
+ IP over InfiniBand: Connected Mode (RFC 4755)
+ http://ietf.org/rfc/rfc4755.txt
--- /dev/null
+BCM5974 Driver (bcm5974)
+------------------------
+ Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+ Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+ Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/
--- /dev/null
+Multi-touch (MT) Protocol
+-------------------------
+ Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation. The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else. Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted [4].
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same [4].
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular [4].
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned. Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+ ABS_MT_TOUCH_MAJOR := max(X, Y)
+ ABS_MT_TOUCH_MINOR := min(X, Y)
+ ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique trackingID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the Synaptics X driver, and in addition
+implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
--- /dev/null
+rotary-encoder - a generic driver for GPIO connected devices
+Daniel Mack <daniel@caiaq.de>, Feb 2009
+
+0. Function
+-----------
+
+Rotary encoders are devices which are connected to the CPU or other
+peripherals with two wires. The outputs are phase-shifted by 90 degrees
+and by triggering on falling and rising edges, the turn direction can
+be determined.
+
+The phase diagram of these two outputs look like this:
+
+ _____ _____ _____
+ | | | | | |
+ Channel A ____| |_____| |_____| |____
+
+ : : : : : : : : : : : :
+ __ _____ _____ _____
+ | | | | | | |
+ Channel B |_____| |_____| |_____| |__
+
+ : : : : : : : : : : : :
+ Event a b c d a b c d a b c d
+
+ |<-------->|
+ one step
+
+
+For more information, please see
+ http://en.wikipedia.org/wiki/Rotary_encoder
+
+
+1. Events / state machine
+-------------------------
+
+a) Rising edge on channel A, channel B in low state
+ This state is used to recognize a clockwise turn
+
+b) Rising edge on channel B, channel A in high state
+ When entering this state, the encoder is put into 'armed' state,
+ meaning that there it has seen half the way of a one-step transition.
+
+c) Falling edge on channel A, channel B in high state
+ This state is used to recognize a counter-clockwise turn
+
+d) Falling edge on channel B, channel A in low state
+ Parking position. If the encoder enters this state, a full transition
+ should have happend, unless it flipped back on half the way. The
+ 'armed' state tells us about that.
+
+2. Platform requirements
+------------------------
+
+As there is no hardware dependent call in this driver, the platform it is
+used with must support gpiolib. Another requirement is that IRQs must be
+able to fire on both edges.
+
+
+3. Board integration
+--------------------
+
+To use this driver in your system, register a platform_device with the
+name 'rotary-encoder' and associate the IRQs and some specific platform
+data with it.
+
+struct rotary_encoder_platform_data is declared in
+include/linux/rotary-encoder.h and needs to be filled with the number of
+steps the encoder has and can carry information about externally inverted
+signals (because of used invertig buffer or other reasons).
+
+Because GPIO to IRQ mapping is platform specific, this information must
+be given in seperately to the driver. See the example below.
+
+---------<snip>---------
+
+/* board support file example */
+
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+
+#define GPIO_ROTARY_A 1
+#define GPIO_ROTARY_B 2
+
+static struct rotary_encoder_platform_data my_rotary_encoder_info = {
+ .steps = 24,
+ .axis = ABS_X,
+ .gpio_a = GPIO_ROTARY_A,
+ .gpio_b = GPIO_ROTARY_B,
+ .inverted_a = 0,
+ .inverted_b = 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+ .name = "rotary-encoder",
+ .id = 0,
+ .dev = {
+ .platform_data = &my_rotary_encoder_info,
+ }
+};
+
- this file (info on ISDN implementation for Linux)
CREDITS
- list of the kind folks that brought you this stuff.
+HiSax.cert
+ - information about the ITU approval certification of the HiSax driver.
INTERFACE
- - description of Linklevel and Hardwarelevel ISDN interface.
+ - description of isdn4linux Link Level and Hardware Level interfaces.
+INTERFACE.fax
+ - description of the fax subinterface of isdn4linux.
+INTERFACE.CAPI
+ - description of kernel CAPI Link Level to Hardware Level interface.
README
- general info on what you need and what to do for Linux ISDN.
README.FAQ
- info for running audio over ISDN.
README.fax
- info for using Fax over ISDN.
+README.gigaset
+ - info on the drivers for Siemens Gigaset ISDN adapters.
README.icn
- info on the ICN-ISDN-card and its driver.
README.HiSax
README.sc
- info on driver for Spellcaster cards.
README.x25
- _ info for running X.25 over ISDN.
+ - info for running X.25 over ISDN.
README.hysdn
- - info on driver for Hypercope active HYSDN cards
-
+ - info on driver for Hypercope active HYSDN cards
+README.mISDN
+ - info on the Modular ISDN subsystem (mISDN).
--- /dev/null
+Kernel CAPI Interface to Hardware Drivers
+-----------------------------------------
+
+1. Overview
+
+From the CAPI 2.0 specification:
+COMMON-ISDN-API (CAPI) is an application programming interface standard used
+to access ISDN equipment connected to basic rate interfaces (BRI) and primary
+rate interfaces (PRI).
+
+Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
+hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
+lingo) with Kernel CAPI to indicate their readiness to provide their service
+to CAPI applications. CAPI applications also register with Kernel CAPI,
+requesting association with a CAPI device. Kernel CAPI then dispatches the
+application registration to an available device, forwarding it to the
+corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
+directions between the application and the hardware driver.
+
+Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
+This standard is freely available from http://www.capi.org.
+
+
+2. Driver and Device Registration
+
+CAPI drivers optionally register themselves with Kernel CAPI by calling the
+Kernel CAPI function register_capi_driver() with a pointer to a struct
+capi_driver. This structure must be filled with the name and revision of the
+driver, and optionally a pointer to a callback function, add_card(). The
+registration can be revoked by calling the function unregister_capi_driver()
+with a pointer to the same struct capi_driver.
+
+CAPI drivers must register each of the ISDN devices they control with Kernel
+CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
+struct capi_ctr before they can be used. This structure must be filled with
+the names of the driver and controller, and a number of callback function
+pointers which are subsequently used by Kernel CAPI for communicating with the
+driver. The registration can be revoked by calling the function
+detach_capi_ctr() with a pointer to the same struct capi_ctr.
+
+Before the device can be actually used, the driver must fill in the device
+information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
+structure of the device, and signal its readiness by calling capi_ctr_ready().
+From then on, Kernel CAPI may call the registered callback functions for the
+device.
+
+If the device becomes unusable for any reason (shutdown, disconnect ...), the
+driver has to call capi_ctr_reseted(). This will prevent further calls to the
+callback functions by Kernel CAPI.
+
+
+3. Application Registration and Communication
+
+Kernel CAPI forwards registration requests from applications (calls to CAPI
+operation CAPI_REGISTER) to an appropriate hardware driver by calling its
+register_appl() callback function. A unique Application ID (ApplID, u16) is
+allocated by Kernel CAPI and passed to register_appl() along with the
+parameter structure provided by the application. This is analogous to the
+open() operation on regular files or character devices.
+
+After a successful return from register_appl(), CAPI messages from the
+application may be passed to the driver for the device via calls to the
+send_message() callback function. The CAPI message to send is stored in the
+data portion of an skb. Conversely, the driver may call Kernel CAPI's
+capi_ctr_handle_message() function to pass a received CAPI message to Kernel
+CAPI for forwarding to an application, specifying its ApplID.
+
+Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
+forwarded as calls to the release_appl() callback function, passing the same
+ApplID as with register_appl(). After return from release_appl(), no CAPI
+messages for that application may be passed to or from the device anymore.
+
+
+4. Data Structures
+
+4.1 struct capi_driver
+
+This structure describes a Kernel CAPI driver itself. It is used in the
+register_capi_driver() and unregister_capi_driver() functions, and contains
+the following non-private fields, all to be set by the driver before calling
+register_capi_driver():
+
+char name[32]
+ the name of the driver, as a zero-terminated ASCII string
+char revision[32]
+ the revision number of the driver, as a zero-terminated ASCII string
+int (*add_card)(struct capi_driver *driver, capicardparams *data)
+ a callback function pointer (may be NULL)
+
+
+4.2 struct capi_ctr
+
+This structure describes an ISDN device (controller) handled by a Kernel CAPI
+driver. After registration via the attach_capi_ctr() function it is passed to
+all controller specific lower layer interface and callback functions to
+identify the controller to operate on.
+
+It contains the following non-private fields:
+
+- to be set by the driver before calling attach_capi_ctr():
+
+struct module *owner
+ pointer to the driver module owning the device
+
+void *driverdata
+ an opaque pointer to driver specific data, not touched by Kernel CAPI
+
+char name[32]
+ the name of the controller, as a zero-terminated ASCII string
+
+char *driver_name
+ the name of the driver, as a zero-terminated ASCII string
+
+int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
+ (optional) pointer to a callback function for sending firmware and
+ configuration data to the device
+
+void (*reset_ctr)(struct capi_ctr *ctrlr)
+ pointer to a callback function for performing a reset on the device,
+ releasing all registered applications
+
+void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
+ capi_register_params *rparam)
+void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
+ pointers to callback functions for registration and deregistration of
+ applications with the device
+
+u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
+ pointer to a callback function for sending a CAPI message to the
+ device
+
+char *(*procinfo)(struct capi_ctr *ctrlr)
+ pointer to a callback function returning the entry for the device in
+ the CAPI controller info table, /proc/capi/controller
+
+read_proc_t *ctr_read_proc
+ pointer to the read_proc callback function for the device's proc file
+ system entry, /proc/capi/controllers/<n>; will be called with a
+ pointer to the device's capi_ctr structure as the last (data) argument
+
+- to be filled in before calling capi_ctr_ready():
+
+u8 manu[CAPI_MANUFACTURER_LEN]
+ value to return for CAPI_GET_MANUFACTURER
+
+capi_version version
+ value to return for CAPI_GET_VERSION
+
+capi_profile profile
+ value to return for CAPI_GET_PROFILE
+
+u8 serial[CAPI_SERIAL_LEN]
+ value to return for CAPI_GET_SERIAL
+
+
+5. Lower Layer Interface Functions
+
+(declared in <linux/isdn/capilli.h>)
+
+void register_capi_driver(struct capi_driver *drvr)
+void unregister_capi_driver(struct capi_driver *drvr)
+ register/unregister a driver with Kernel CAPI
+
+int attach_capi_ctr(struct capi_ctr *ctrlr)
+int detach_capi_ctr(struct capi_ctr *ctrlr)
+ register/unregister a device (controller) with Kernel CAPI
+
+void capi_ctr_ready(struct capi_ctr *ctrlr)
+void capi_ctr_reseted(struct capi_ctr *ctrlr)
+ signal controller ready/not ready
+
+void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
+void capi_ctr_resume_output(struct capi_ctr *ctrlr)
+ signal suspend/resume
+
+void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
+ struct sk_buff *skb)
+ pass a received CAPI message to Kernel CAPI
+ for forwarding to the specified application
+
+
+6. Helper Functions and Macros
+
+Library functions (from <linux/isdn/capilli.h>):
+
+void capilib_new_ncci(struct list_head *head, u16 applid,
+ u32 ncci, u32 winsize)
+void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
+void capilib_release_appl(struct list_head *head, u16 applid)
+void capilib_release(struct list_head *head)
+void capilib_data_b3_conf(struct list_head *head, u16 applid,
+ u32 ncci, u16 msgid)
+u16 capilib_data_b3_req(struct list_head *head, u16 applid,
+ u32 ncci, u16 msgid)
+
+
+Macros to extract/set element values from/in a CAPI message header
+(from <linux/isdn/capiutil.h>):
+
+Get Macro Set Macro Element (Type)
+
+CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16)
+CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16)
+CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8)
+CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8)
+CAPIMSG_CMD(m) - Command*256
+ + Subcommand (u16)
+CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16)
+
+CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI
+ (u32)
+CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16)
+
--- 6.7 Custom kbuild commands
--- 6.8 Preprocessing linker scripts
- === 7 Kbuild Variables
- === 8 Makefile language
- === 9 Credits
- === 10 TODO
+ === 7 Kbuild syntax for exported headers
+ --- 7.1 header-y
+ --- 7.2 objhdr-y
+ --- 7.3 destination-y
+ --- 7.4 unifdef-y (deprecated)
+
+ === 8 Kbuild Variables
+ === 9 Makefile language
+ === 10 Credits
+ === 11 TODO
=== 1 Overview
#arch/m68k/fpsp040/Makefile
ldflags-y := -x
+ subdir-ccflags-y, subdir-asflags-y
+ The two flags listed above are similar to ccflags-y and as-falgs-y.
+ The difference is that the subdir- variants has effect for the kbuild
+ file where tey are present and all subdirectories.
+ Options specified using subdir-* are added to the commandline before
+ the options specified using the non-subdir variants.
+
+ Example:
+ subdir-ccflags-y := -Werror
+
CFLAGS_$@, AFLAGS_$@
CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
The kbuild infrastructure for *lds file are used in several
architecture-specific files.
+=== 7 Kbuild syntax for exported headers
+
+The kernel include a set of headers that is exported to userspace.
+Many headers can be exported as-is but other headers requires a
+minimal pre-processing before they are ready for user-space.
+The pre-processing does:
+- drop kernel specific annotations
+- drop include of compiler.h
+- drop all sections that is kernel internat (guarded by ifdef __KERNEL__)
+
+Each relevant directory contain a file name "Kbuild" which specify the
+headers to be exported.
+See subsequent chapter for the syntax of the Kbuild file.
+
+ --- 7.1 header-y
+
+ header-y specify header files to be exported.
+
+ Example:
+ #include/linux/Kbuild
+ header-y += usb/
+ header-y += aio_abi.h
+
+ The convention is to list one file per line and
+ preferably in alphabetic order.
+
+ header-y also specify which subdirectories to visit.
+ A subdirectory is identified by a trailing '/' which
+ can be seen in the example above for the usb subdirectory.
+
+ Subdirectories are visited before their parent directories.
+
+ --- 7.2 objhdr-y
+
+ objhdr-y specifies generated files to be exported.
+ Generated files are special as they need to be looked
+ up in another directory when doing 'make O=...' builds.
+
+ Example:
+ #include/linux/Kbuild
+ objhdr-y += version.h
+
+ --- 7.3 destination-y
+
+ When an architecture have a set of exported headers that needs to be
+ exported to a different directory destination-y is used.
+ destination-y specify the destination directory for all exported
+ headers in the file where it is present.
+
+ Example:
+ #arch/xtensa/platforms/s6105/include/platform/Kbuild
+ destination-y := include/linux
+
+ In the example above all exported headers in the Kbuild file
+ will be located in the directory "include/linux" when exported.
+
+
+ --- 7.4 unifdef-y (deprecated)
+
+ unifdef-y is deprecated. A direct replacement is header-y.
+
-=== 7 Kbuild Variables
+=== 8 Kbuild Variables
The top Makefile exports the following variables:
INSTALL_MOD_STRIP will used as the option(s) to the strip command.
-=== 8 Makefile language
+=== 9 Makefile language
The kernel Makefiles are designed to be run with GNU Make. The Makefiles
use only the documented features of GNU Make, but they do use many
There are some cases where "=" is appropriate. Usually, though, ":="
is the right choice.
-=== 9 Credits
+=== 10 Credits
Original version made by Michael Elizabeth Chastain, <mailto:mec@shout.net>
Updates by Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
Updates by Sam Ravnborg <sam@ravnborg.org>
Language QA by Jan Engelhardt <jengelh@gmx.de>
-=== 10 TODO
+=== 11 TODO
- Describe how kbuild supports shipped files with _shipped.
- Generating offset header files.
Inside a struct description, you can use the "private:" and "public:"
comment tags. Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation. The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker. They may optionally include comments between the ":" and the
+ending "*/" marker.
Example:
struct my_struct {
int a;
int b;
-/* private: */
+/* private: internal use only */
int c;
};
usbcore.blinkenlights=1
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+ log_buf_len=1M print-fatal-signals=1
+can also be entered as
+ log-buf-len=1M print_fatal_signals=1
+
+
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
./include/asm/setup.h as COMMAND_LINE_SIZE.
- acpi= [HW,ACPI,X86-64,i386]
+ acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq | rsdt }
force -- enable ACPI if default was off
acpi_osi="!string2" # remove built-in string2
acpi_osi= # disable all strings
- acpi_pm_good [X86-32,X86-64]
+ acpi_pm_good [X86]
Override the pmtimer bug detection: force the kernel
to assume that this machine's pmtimer latches its value
and always returns good values.
power state again in power transition.
1 : disable the power state check
+ acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
+ Format: { level | edge | high | low }
+
+ acpi_serialize [HW,ACPI] force serialization of AML methods
+
+ acpi_skip_timer_override [HW,ACPI]
+ Recognize and ignore IRQ0/pin2 Interrupt Override.
+ For broken nForce2 BIOS resulting in XT-PIC timer.
+
+ acpi_sleep= [HW,ACPI] Sleep options
+ Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+ old_ordering, s4_nonvs }
+ See Documentation/power/video.txt for information on
+ s3_bios and s3_mode.
+ s3_beep is for debugging; it makes the PC's speaker beep
+ as soon as the kernel's real-mode entry point is called.
+ s4_nohwsig prevents ACPI hardware signature from being
+ used during resume from hibernation.
+ old_ordering causes the ACPI 1.0 ordering of the _PTS
+ control method, with respect to putting devices into
+ low power states, to be enforced (the ACPI 2.0 ordering
+ of _PTS is used by default).
+ s4_nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during hibernation.
+
+ acpi_use_timer_override [HW,ACPI]
+ Use timer override. For some broken Nvidia NF5 boards
+ that require a timer override, but don't have HPET
+
acpi_enforce_resources= [ACPI]
{ strict | lax | no }
Check for resource conflicts between native drivers
ad1848= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<type>
+ add_efi_memmap [EFI; X86] Include EFI memory map in
+ kernel's map of available physical RAM.
+
advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
- apic= [APIC,i386] Advanced Programmable Interrupt Controller
+ apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
Also note the kernel might malfunction if you disable
some critical bits.
- code_bytes [IA32/X86_64] How many bytes of object code to print
+ code_bytes [X86] How many bytes of object code to print
in an oops report.
Range: 0 - 8192
Default: 64
MTRR settings. This parameter disables that behavior,
possibly causing your machine to run very slowly.
- disable_timer_pin_1 [i386,x86-64]
+ disable_timer_pin_1 [X86]
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
UART at the specified I/O port or MMIO address.
The options are the same as for ttyS, above.
- earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
+ earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
earlyprintk=dbgp
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
- elfcorehdr= [IA64,PPC,SH,X86-32,X86_64]
+ elfcorehdr= [IA64,PPC,SH,X86]
Specifies physical address of start of kernel core
image elf header. Generally kexec loader will
pass this option to capture kernel.
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
- enable_timer_pin_1 [i386,x86-64]
+ enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
- for IA-64, off otherwise.
+ for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
- io_delay= [X86-32,X86-64] I/O delay method
+ io_delay= [X86] I/O delay method
0x80
Standard port 0x80 based delay
0xed
keepinitrd [HW,ARM]
- kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+ kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
specifies the amount of memory usable by the kernel
for non-movable allocations. The requested amount is
spread evenly throughout all nodes in the system. The
Configure the RouterBoard 532 series on-chip
Ethernet adapter MAC address.
- kstack=N [X86-32,X86-64] Print N words from the kernel stack
+ kstack=N [X86] Print N words from the kernel stack
in oops dumps.
l2cr= [PPC]
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
- lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer
+ lapic_timer_c2_ok [X86,APIC] trust the local apic timer
in C2 power state.
libata.dma= [LIBATA] DMA control
[KNL,SH] Allow user to override the default size for
per-device physically contiguous DMA buffers.
- memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact
+ memmap=exactmap [KNL,X86] Enable setting of an exact
E820 memory map, as specified by the user.
Such memmap=exactmap lines can be constructed based on
BIOS output or other requirements. See the memmap=nn@ss
mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
reporting absolute coordinates, such as tablets
- movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+ movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
is similar to kernelcore except it specifies the
amount of memory used for migratable allocations.
If both kernelcore and movablecore is specified,
when a NMI is triggered.
Format: [state][,regs][,debounce][,die]
- nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+ nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
Format: [panic,][num]
Valid num: 0,1,2
0 - turn nmi_watchdog off
nodsp [SH] Disable hardware DSP at boot time.
- noefi [X86-32,X86-64] Disable EFI runtime services support.
+ noefi [X86] Disable EFI runtime services support.
noexec [IA-64]
- noexec [X86-32,X86-64]
+ noexec [X86]
On X86-32 available only on PAE configured kernels.
noexec=on: enable non-executable mappings (default)
noexec=off: disable non-executable mappings
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
+ noxsave [BUGS=X86] Disables x86 extended register state save
+ and restore using xsave. The kernel will fallback to
+ enabling legacy floating-point and sse state.
+
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.
noirqdebug [X86-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
- no_timer_check [X86-32,X86_64,APIC] Disables the code which tests for
+ no_timer_check [X86,APIC] Disables the code which tests for
broken timer IRQ sources.
noisapnp [ISAPNP] Disables ISA PnP code.
noinitrd [RAM] Tells the kernel not to load any configured
initial RAM disk.
+ nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
+ remapping.
+
nointroute [IA-64]
nojitter [IA64] Disables jitter checking for ITC timers.
nowb [ARM]
+ nox2apic [X86-64,APIC] Do not enable x2APIC mode.
+
nptcg= [IA64] Override max number of concurrent global TLB
purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
disable the use of PCIE advanced error reporting.
nodomains [PCI] Disable support for multiple PCI
root domains (aka PCI segments, in ACPI-speak).
- nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI
+ nommconf [X86] Disable use of MMCONFIG for PCI
Configuration
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
autoconfiguration.
Ranges are in pairs (memory base and size).
+ ports= [IP_VS_FTP] IPVS ftp helper module
+ Default is 21.
+ Up to 8 (IP_VS_APP_MAX_PORTS) ports
+ may be specified.
+ Format: <port>,<port>....
+
print-fatal-signals=
[KNL] debug: print fatal signals
print-fatal-signals=1: print segfault info to
reported either.
unknown_nmi_panic
- [X86-32,X86-64]
+ [X86]
Set unknown_nmi_panic=1 early on boot.
usbcore.autosuspend=
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
- vdso= [X86-32,SH,x86-64]
+ vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO)
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
- vdso32= [X86-32,X86-64]
+ vdso32= [X86]
vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
vdso32=1: enable 32-bit VDSO (default)
vdso32=0: disable 32-bit VDSO mapping
ThinkPad ACPI Extras Driver
- Version 0.22
- November 23rd, 2008
+ Version 0.23
+ April 10th, 2009
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
/, /` - or, A Young Coder's Illustrated Hypervisor
\\"--\\ http://lguest.ozlabs.org
-Lguest is designed to be a minimal hypervisor for the Linux kernel, for
-Linux developers and users to experiment with virtualization with the
-minimum of complexity. Nonetheless, it should have sufficient
-features to make it useful for specific tasks, and, of course, you are
-encouraged to fork and enhance it (see drivers/lguest/README).
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity. Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
Features:
"Paravirtualized guest support" = Y
"Lguest guest support" = Y
"High Memory Support" = off/4GB
+ "PAE (Physical Address Extension) Support" = N
"Alignment value to which kernel should be aligned" = 0x100000
(CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
CONFIG_PHYSICAL_ALIGN=0x100000)
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
- '.' acquired while irqs disabled
- '+' acquired in irq context
- '-' acquired with irqs enabled
+ '.' acquired while irqs disabled and not in irq context
+ '-' acquired in irq context
+ '+' acquired with irqs enabled
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:xlink="http://www.w3.org/1999/xlink"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- width="1771.6534"
- height="1417.3228"
- id="svg2"
- sodipodi:version="0.32"
- inkscape:version="0.46"
- sodipodi:docname="tuz.svg"
- inkscape:output_extension="org.inkscape.output.svg.inkscape"
- version="1.0"
- style="display:inline;enable-background:new"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
- inkscape:export-xdpi="100.03588"
- inkscape:export-ydpi="100.03588">
- <sodipodi:namedview
- id="base"
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1.0"
- gridtolerance="10000"
- guidetolerance="10"
- objecttolerance="10"
- inkscape:pageopacity="0.0"
- inkscape:pageshadow="2"
- inkscape:zoom="0.25"
- inkscape:cx="-174.7931"
- inkscape:cy="784.26325"
- inkscape:document-units="px"
- inkscape:current-layer="svg2"
- showgrid="false"
- inkscape:window-width="1280"
- inkscape:window-height="823"
- inkscape:window-x="-4"
- inkscape:window-y="25"
- showguides="true"
- inkscape:guide-bbox="true"
- units="mm" />
- <defs
- id="defs4">
- <filter
- inkscape:collect="always"
- x="-0.084654994"
- width="1.16931"
- y="-0.36592469"
- height="1.7318494"
- id="filter11361">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.5740586"
- id="feGaussianBlur11363" />
- </filter>
- <inkscape:perspective
- sodipodi:type="inkscape:persp3d"
- inkscape:vp_x="0 : 564.0976 : 1"
- inkscape:vp_y="0 : 1000 : 0"
- inkscape:vp_z="1445.8591 : 564.0976 : 1"
- inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
- id="perspective8145" />
- <linearGradient
- id="linearGradient7622">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop7624" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop7626" />
- </linearGradient>
- <linearGradient
- id="linearGradient4113">
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="0"
- id="stop4115" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop4117" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient3660">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3662" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop3664" />
- </linearGradient>
- <linearGradient
- id="linearGradient3627">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3629" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3631" />
- </linearGradient>
- <linearGradient
- id="linearGradient2843">
- <stop
- id="stop2845"
- offset="0"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.02188784"
- id="stop2847" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.75866222"
- id="stop2849" />
- <stop
- id="stop2851"
- offset="0.88508981"
- style="stop-color:#232323;stop-opacity:1;" />
- <stop
- id="stop2853"
- offset="1"
- style="stop-color:#595959;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient8964">
- <stop
- style="stop-color:#1a1a1a;stop-opacity:1;"
- offset="0"
- id="stop8966" />
- <stop
- style="stop-color:#1a1a1a;stop-opacity:0;"
- offset="1"
- id="stop8968" />
- </linearGradient>
- <linearGradient
- id="linearGradient8952">
- <stop
- style="stop-color:#0a0c0c;stop-opacity:1;"
- offset="0"
- id="stop8954" />
- <stop
- style="stop-color:#1f2727;stop-opacity:0;"
- offset="1"
- id="stop8956" />
- </linearGradient>
- <linearGradient
- id="linearGradient8430">
- <stop
- style="stop-color:#1e2323;stop-opacity:1;"
- offset="0"
- id="stop8432" />
- <stop
- id="stop8438"
- offset="0.55992389"
- style="stop-color:#181d1d;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8434" />
- </linearGradient>
- <linearGradient
- id="linearGradient8398">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop8400" />
- <stop
- id="stop8402"
- offset="0.5125587"
- style="stop-color:#1e2424;stop-opacity:0;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8404" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4870">
- <stop
- style="stop-color:#c7bd80;stop-opacity:1;"
- offset="0"
- id="stop4872" />
- <stop
- style="stop-color:#c7bd80;stop-opacity:0;"
- offset="1"
- id="stop4874" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4862">
- <stop
- style="stop-color:#e2e2e2;stop-opacity:1;"
- offset="0"
- id="stop4864" />
- <stop
- style="stop-color:#e2e2e2;stop-opacity:0;"
- offset="1"
- id="stop4866" />
- </linearGradient>
- <linearGradient
- id="linearGradient4478">
- <stop
- style="stop-color:#f9eed3;stop-opacity:1;"
- offset="0"
- id="stop4480" />
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="1"
- id="stop4482" />
- </linearGradient>
- <linearGradient
- id="linearGradient4106">
- <stop
- style="stop-color:#d9e002;stop-opacity:1;"
- offset="0"
- id="stop4108" />
- <stop
- id="stop4114"
- offset="0.5"
- style="stop-color:#a9ae01;stop-opacity:1;" />
- <stop
- style="stop-color:#717501;stop-opacity:1;"
- offset="1"
- id="stop4110" />
- </linearGradient>
- <linearGradient
- id="linearGradient4084">
- <stop
- style="stop-color:#7d7d00;stop-opacity:1;"
- offset="0"
- id="stop4086" />
- <stop
- id="stop4088"
- offset="0.3636601"
- style="stop-color:#c6c700;stop-opacity:1;" />
- <stop
- style="stop-color:#f6f800;stop-opacity:1;"
- offset="1"
- id="stop4090" />
- </linearGradient>
- <linearGradient
- id="linearGradient4041">
- <stop
- id="stop4043"
- offset="0"
- style="stop-color:#ffff00;stop-opacity:1;" />
- <stop
- id="stop4045"
- offset="1"
- style="stop-color:#ffff00;stop-opacity:0;" />
- </linearGradient>
- <linearGradient
- id="linearGradient4025">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop4027" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop4031" />
- </linearGradient>
- <linearGradient
- id="linearGradient4013">
- <stop
- style="stop-color:#ffff00;stop-opacity:1;"
- offset="0"
- id="stop4015" />
- <stop
- style="stop-color:#b2b200;stop-opacity:1;"
- offset="1"
- id="stop4017" />
- </linearGradient>
- <linearGradient
- id="linearGradient3985">
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0"
- id="stop3987" />
- <stop
- style="stop-color:#1d1d1d;stop-opacity:1;"
- offset="1"
- id="stop3989" />
- </linearGradient>
- <linearGradient
- id="linearGradient3961">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop3963" />
- <stop
- id="stop3965"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3967" />
- </linearGradient>
- <linearGradient
- id="linearGradient3951">
- <stop
- id="stop3953"
- offset="0"
- style="stop-color:#344040;stop-opacity:1;" />
- <stop
- style="stop-color:#222929;stop-opacity:1;"
- offset="0.5"
- id="stop3955" />
- <stop
- id="stop3957"
- offset="1"
- style="stop-color:#000000;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3909">
- <stop
- style="stop-color:#283131;stop-opacity:1;"
- offset="0"
- id="stop3911" />
- <stop
- id="stop3917"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3913" />
- </linearGradient>
- <linearGradient
- id="linearGradient3537">
- <stop
- style="stop-color:#ada469;stop-opacity:1;"
- offset="0"
- id="stop3539" />
- <stop
- id="stop3545"
- offset="0.81132078"
- style="stop-color:#ada469;stop-opacity:1;" />
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="1"
- id="stop3541" />
- </linearGradient>
- <linearGradient
- id="linearGradient3317">
- <stop
- style="stop-color:#cfc690;stop-opacity:1"
- offset="0"
- id="stop3319" />
- <stop
- id="stop3321"
- offset="0.21161865"
- style="stop-color:#afa775;stop-opacity:1;" />
- <stop
- id="stop3323"
- offset="0.53408515"
- style="stop-color:#615c3a;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.76504093"
- id="stop3325" />
- <stop
- id="stop3327"
- offset="1"
- style="stop-color:#403518;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3239">
- <stop
- id="stop3251"
- offset="0"
- style="stop-color:#cfc690;stop-opacity:1;" />
- <stop
- style="stop-color:#afa775;stop-opacity:1;"
- offset="0.21161865"
- id="stop3267" />
- <stop
- style="stop-color:#615c3a;stop-opacity:1;"
- offset="0.53408515"
- id="stop3261" />
- <stop
- id="stop3265"
- offset="0.76504093"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#403518;stop-opacity:1;"
- offset="1"
- id="stop3243" />
- </linearGradient>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3239"
- id="radialGradient3281"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
- spreadMethod="pad"
- cx="806.52582"
- cy="212.68117"
- fx="806.52582"
- fy="212.68117"
- r="48.363216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient3315"
- cx="543.6698"
- cy="147.3131"
- fx="543.6698"
- fy="147.3131"
- r="47.863216"
- gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3537"
- id="radialGradient3543"
- cx="385"
- cy="237.00504"
- fx="385"
- fy="237.00504"
- r="86.928574"
- gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3909"
- id="radialGradient3915"
- cx="418.30365"
- cy="342.47794"
- fx="418.30365"
- fy="342.47794"
- r="131.4509"
- gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3951"
- id="radialGradient3933"
- cx="397.16388"
- cy="336.95245"
- fx="397.16388"
- fy="336.95245"
- r="36.75"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3961"
- id="linearGradient3959"
- x1="398.21429"
- y1="343.52289"
- x2="379.28571"
- y2="265.30862"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter3981"
- x="-0.30000001"
- width="1.6"
- y="-0.30000001"
- height="1.6">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2"
- id="feGaussianBlur3983" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3985"
- id="radialGradient3991"
- cx="402.48898"
- cy="317.23578"
- fx="402.48898"
- fy="317.23578"
- r="23.714285"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3999">
- <path
- style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
- id="path4001"
- sodipodi:nodetypes="czzczzzzc" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient4056"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4041"
- id="radialGradient4060"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4025"
- id="radialGradient4062"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient4082"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4100">
- <path
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
- id="path4102"
- sodipodi:nodetypes="ccccccc" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4106"
- id="radialGradient4112"
- cx="250.22678"
- cy="475.09763"
- fx="250.22678"
- fy="475.09763"
- r="95.98877"
- gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4484"
- x1="412.08926"
- y1="404.91574"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4486"
- x1="411.91071"
- y1="404.91577"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4488"
- x1="411.91071"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4490"
- x1="412.08926"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4492"
- x1="411.73212"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4862"
- id="radialGradient4868"
- cx="429.56738"
- cy="377.42877"
- fx="429.56738"
- fy="377.42877"
- r="72.079735"
- gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4870"
- id="radialGradient4876"
- cx="437.6991"
- cy="391.21735"
- fx="437.6991"
- fy="391.21735"
- r="36.611931"
- gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient3585"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient3587"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient8410"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient8412"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8514">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8516"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8604">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8606"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8610">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8612"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8616">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8618"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8622">
- <path
- style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
- id="path8624"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8642">
- <path
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
- id="path8644"
- sodipodi:nodetypes="czzcczcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8658">
- <path
- style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
- id="path8660"
- sodipodi:nodetypes="czzzcczzcc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8802"
- x="-0.35311759"
- width="1.7062352"
- y="-0.1817714"
- height="1.3635428">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="48.038491"
- id="feGaussianBlur8804" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8806"
- x="-0.61142862"
- width="2.2228572"
- y="-0.14930232"
- height="1.2986046">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="37.830213"
- id="feGaussianBlur8808" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8810"
- x="-0.23519406"
- width="1.4703881"
- y="-0.24500646"
- height="1.4900129">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="58.328041"
- id="feGaussianBlur8812" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8814"
- x="-0.20466694"
- width="1.4093339"
- y="-0.29007819"
- height="1.5801564">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="22.300169"
- id="feGaussianBlur8816" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8818"
- x="-0.34381232"
- width="1.6876246"
- y="-0.18433961"
- height="1.3686792">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="34.542167"
- id="feGaussianBlur8820" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8822"
- x="-0.2742857"
- width="1.5485713"
- y="-0.21333334"
- height="1.4266667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="11.313708"
- id="feGaussianBlur8824" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8826"
- x="-0.25894088"
- width="1.5178818"
- y="-0.2236412"
- height="1.4472824">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.631544"
- id="feGaussianBlur8828" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8856"
- x="-0.3253231"
- width="1.6506462"
- y="-0.19013336"
- height="1.3802667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="28.712591"
- id="feGaussianBlur8858" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8860"
- x="-0.38093024"
- width="1.7618605"
- y="-0.17518716"
- height="1.3503743">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.304015"
- id="feGaussianBlur8862" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8888"
- x="-0.2112188"
- width="1.4224375"
- y="-0.16808605"
- height="1.3361721">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.3693583"
- id="feGaussianBlur8890" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8892"
- x="-0.18692794"
- width="1.3738559"
- y="-0.23646873"
- height="1.4729375">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="31.21228"
- id="feGaussianBlur8894" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8906">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8908"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8940"
- x="-0.25152978"
- width="1.5030596"
- y="-0.053035267"
- height="1.1060705">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="13.024603"
- id="feGaussianBlur8942" />
- </filter>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8952"
- id="linearGradient8958"
- x1="609.31244"
- y1="239.46866"
- x2="560.83142"
- y2="262.86206"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8964"
- id="linearGradient8970"
- x1="603.84064"
- y1="627.85303"
- x2="616.24396"
- y2="585.42664"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter9020"
- x="-0.32861114"
- width="1.6572223"
- y="-0.182"
- height="1.364">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9022" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9024"
- x="-0.55453134"
- width="2.1090627"
- y="-0.51434779"
- height="2.0286956">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9026" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9044"
- x="-0.32631579"
- width="1.6526316"
- y="-0.84545463"
- height="2.6909094">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9046" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9048"
- x="-0.40879121"
- width="1.8175824"
- y="-0.71538466"
- height="2.4307692">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9050" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3587"
- x="-0.1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.881432"
- id="feGaussianBlur3589" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3602">
- <path
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- id="path3604"
- d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
- style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4120"
- x="-0.2770822"
- width="1.5541644"
- y="-0.32482043"
- height="1.6496409">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.956289"
- id="feGaussianBlur4122" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3631">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- id="path3633"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3665">
- <path
- sodipodi:nodetypes="czzcczcc"
- id="path3667"
- d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3677">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
- id="path3679"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3898">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.892985"
- id="feGaussianBlur3900" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4130"
- x="-0.49509686"
- width="1.9901937"
- y="-0.26708817"
- height="1.5341763">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.730622"
- id="feGaussianBlur4132" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4141"
- x="-0.40611032"
- width="1.8122206"
- y="-0.30260596"
- height="1.6052119">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="9.8586086"
- id="feGaussianBlur4143" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4177">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path4179"
- d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4185">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.6164709"
- id="feGaussianBlur4187" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4105">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.8640966"
- id="feGaussianBlur4107" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath2833">
- <path
- style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
- id="path2835"
- sodipodi:nodetypes="czzzcczzcc" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient2843"
- id="linearGradient2841"
- gradientUnits="userSpaceOnUse"
- x1="347.89655"
- y1="1070.2124"
- x2="275.58191"
- y2="867.97992" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3627"
- id="linearGradient3688"
- gradientUnits="userSpaceOnUse"
- x1="699.32867"
- y1="269.76755"
- x2="698.97504"
- y2="346.1351" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask3684">
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path3686"
- sodipodi:cx="579.474"
- sodipodi:cy="260.57516"
- sodipodi:rx="192.6866"
- sodipodi:ry="164.04877"
- d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
- transform="translate(-174.03125,62.156036)" />
- </mask>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3622">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
- id="path3624"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3636">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- id="path3638"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3660"
- id="linearGradient3666"
- x1="1255.7386"
- y1="667.09216"
- x2="893.69995"
- y2="858.01099"
- gradientUnits="userSpaceOnUse" />
- <filter
- inkscape:collect="always"
- id="filter3779"
- x="-0.087980822"
- width="1.1759616"
- y="-0.17728332"
- height="1.3545666">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="16.340344"
- id="feGaussianBlur3781" />
- </filter>
- <filter
- id="filter3785"
- inkscape:label="White Fur">
- <feTurbulence
- id="feTurbulence3787"
- in="SourceAlpha"
- type="fractalNoise"
- baseFrequency="0.24044943820224721"
- numOctaves="10"
- seed="655"
- result="result0" />
- <feDisplacementMap
- id="feDisplacementMap3789"
- in="SourceGraphic"
- in2="result0"
- scale="62"
- xChannelSelector="B"
- yChannelSelector="G" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3677">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.0397518"
- id="feGaussianBlur3679" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3722">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3724"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3986">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3988"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3992">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3994"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3998">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
- id="path4000"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4002"
- x="-0.24334238"
- width="1.4866848"
- y="-0.39104807"
- height="1.7820961">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="14.589518"
- id="feGaussianBlur4004" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4010"
- x="-0.14577261"
- width="1.2915452"
- y="-0.23523259"
- height="1.4704652">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.4442907"
- id="feGaussianBlur4012" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4053">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.6062947"
- id="feGaussianBlur4055" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4079">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.5887624"
- id="feGaussianBlur4081" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4083">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.5052066"
- id="feGaussianBlur4085" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4113"
- id="radialGradient4119"
- cx="296.33783"
- cy="427.17749"
- fx="296.33783"
- fy="427.17749"
- r="19.704132"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
- <filter
- inkscape:collect="always"
- id="filter6949"
- x="-0.10294895"
- width="1.2058979"
- y="-0.34224695"
- height="1.6844939">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6951" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6953"
- x="-0.098320946"
- width="1.1966419"
- y="-0.19750816"
- height="1.3950163">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6955" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6957"
- x="-0.098213427"
- width="1.1964267"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6959" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6961"
- x="-0.09919104"
- width="1.1983821"
- y="-0.22643611"
- height="1.4528722">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6963" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6965"
- x="-0.099081434"
- width="1.1981629"
- y="-0.22529824"
- height="1.4505965">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6967" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6969"
- x="-0.10450897"
- width="1.2090179"
- y="-0.40468886"
- height="1.8093777">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6971" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6973"
- x="-0.10330495"
- width="1.2066098"
- y="-0.36439717"
- height="1.7287945">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6975" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6977"
- x="-0.10224481"
- width="1.2044896"
- y="-0.32371372"
- height="1.6474274">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6979" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6981"
- x="-0.10052545"
- width="1.2010509"
- y="-0.2742162"
- height="1.5484324">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6983" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6985"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20853186"
- height="1.4170637">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6987" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6989"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20287035"
- height="1.4057407">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6991" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6993"
- x="-0.098213255"
- width="1.1964265"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6995" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6997">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6999" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7001">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur7003" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7285"
- x="-0.030884685"
- width="1.0617694"
- y="-0.10267408"
- height="1.2053483">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7287" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7289">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7291" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7293">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7295" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7297">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7299" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7301">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7303" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7305">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7307" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7309">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7311" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7313">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7315" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7317">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7319" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7321">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7323" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7325"
- x="-0.031352691"
- width="1.0627054"
- y="-0.12140666"
- height="1.2428133">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7327" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7329"
- x="-0.030991485"
- width="1.061983"
- y="-0.10931916"
- height="1.2186383">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7331" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7335" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7337">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7339" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7345">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.7233839"
- id="feGaussianBlur7347" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7421">
- <path
- sodipodi:type="inkscape:offset"
- inkscape:radius="0"
- inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
- style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- id="path7423"
- d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
- transform="translate(8.0045714e-2,-3.125e-2)" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7578"
- x="-0.08160872"
- width="1.1632174"
- y="-0.22659944"
- height="1.4531989">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.437399"
- id="feGaussianBlur7580" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7594"
- x="-0.040804356"
- width="1.0816087"
- y="-0.11329972"
- height="1.2265995">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.2186995"
- id="feGaussianBlur7596" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7606">
- <path
- id="path7608"
- d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
- style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7610"
- x="-0.021942979"
- width="1.0438859"
- y="-0.10017137"
- height="1.2003427">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.57530213"
- id="feGaussianBlur7612" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7616">
- <path
- id="path7618"
- d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
- style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient7622"
- id="linearGradient7708"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(-19.091883,4.2426407)"
- x1="774.97668"
- y1="-211.87105"
- x2="755.11584"
- y2="-202.67865" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask7704">
- <path
- style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
- id="path7706" />
- </mask>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8430"
- id="radialGradient7904"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
- cx="142.95833"
- cy="107.09234"
- fx="142.95833"
- fy="107.09234"
- r="66.981766" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient7906"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient7908"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8209">
- <path
- sodipodi:nodetypes="czcc"
- id="path8211"
- d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
- style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8225">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.661912"
- id="feGaussianBlur8227" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.18"
- id="feGaussianBlur8335" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8338">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8340"
- d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8354">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.82"
- id="feGaussianBlur8356" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8359">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8361"
- d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8379"
- x="-0.14413793"
- width="1.288276"
- y="-0.10278689"
- height="1.2055738">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.389266"
- id="feGaussianBlur8381" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8392">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8394"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8404"
- x="-0.090268657"
- width="1.1805373"
- y="-0.10250848"
- height="1.205017">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="5.3457272"
- id="feGaussianBlur8406" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8417">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8419"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- </defs>
- <metadata
- id="metadata7">
- <rdf:RDF>
- <cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- </cc:Work>
- </rdf:RDF>
- </metadata>
- <g
- inkscape:groupmode="layer"
- id="layer1"
- inkscape:label="Shadow">
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
- d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
- id="path10326"
- sodipodi:nodetypes="cccccccccsccccccccccc"
- transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
- inkscape:export-xdpi="142.10527"
- inkscape:export-ydpi="142.10527" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer20"
- inkscape:label="New Ear">
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g7882"
- transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
- <path
- sodipodi:nodetypes="czzzzcc"
- id="path7876"
- d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
- style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <path
- sodipodi:nodetypes="czzzzzc"
- id="path7878"
- d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
- style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <path
- sodipodi:nodetypes="czccssc"
- id="path7880"
- d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
- style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </g>
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer21"
- inkscape:label="Rendered2"
- style="display:inline">
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
- id="path7917"
- sodipodi:nodetypes="czzzcczzcc" />
- <path
- style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
- d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
- id="path7919"
- clip-path="url(#clipPath8658)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
- d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
- id="path7923"
- clip-path="url(#clipPath2833)"
- sodipodi:nodetypes="cccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
- id="path7921"
- sodipodi:nodetypes="czzcczcc" />
- <path
- style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
- d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
- id="path7925"
- sodipodi:nodetypes="ccccccc"
- clip-path="url(#clipPath3665)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
- id="path7927"
- sodipodi:nodetypes="czzzzcc" />
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
- d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
- id="path7929"
- clip-path="url(#clipPath8642)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g7931"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-347.89063"
- inkscape:transform-center-y="-28.255779">
- <path
- style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
- id="path7933" />
- <g
- clip-path="url(#clipPath7616)"
- style="display:inline;filter:url(#filter7610);enable-background:new"
- id="g7935"
- transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
- <path
- sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
- id="path7937"
- d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- id="path7939"
- d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- sodipodi:nodetypes="cssccsscc" />
- <path
- id="path7941"
- d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- sodipodi:nodetypes="csccscc" />
- </g>
- <g
- clip-path="url(#clipPath7606)"
- id="g7943">
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
- d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
- id="path7945"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
- d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
- id="path7947"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- </g>
- </g>
- <path
- style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
- id="path7949"
- sodipodi:nodetypes="cscccccccccccc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
- d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
- id="path7951"
- sodipodi:nodetypes="ccccczzzcc"
- clip-path="url(#clipPath8616)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
- id="path7953"
- sodipodi:nodetypes="czcc" />
- <path
- style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
- d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
- id="path7955"
- sodipodi:nodetypes="cccc"
- clip-path="url(#clipPath8209)"
- transform="translate(276,136)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="opacity:1;display:inline;enable-background:new"
- id="g7957"
- clip-path="url(#clipPath3998)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677)"
- id="g7959">
- <g
- id="g7961"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7963"
- d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7965"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g7967"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzcc"
- id="path7969"
- d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7971"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="opacity:0.18000004;display:inline;enable-background:new"
- id="g7973">
- <g
- id="g7975"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7977"
- d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7979"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g7981"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzcc"
- id="path7983"
- d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7985"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
- d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
- id="path7987"
- clip-path="url(#clipPath8604)"
- sodipodi:nodetypes="cccccscc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
- id="path7989"
- sodipodi:nodetypes="czzzzzzc" />
- <path
- style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
- id="path7991"
- sodipodi:nodetypes="czzzzc" />
- <path
- sodipodi:type="arc"
- style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
- id="path7993"
- sodipodi:cx="385"
- sodipodi:cy="237.00504"
- sodipodi:rx="86.428574"
- sodipodi:ry="73.928574"
- d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
- transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
- clip-path="url(#clipPath4100)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
- id="path7995"
- sodipodi:nodetypes="csczzc"
- mask="url(#mask3684)" />
- <path
- style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
- id="path7997"
- sodipodi:nodetypes="czcc" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path7999"
- sodipodi:cx="409.28571"
- sodipodi:cy="306.64789"
- sodipodi:rx="36.25"
- sodipodi:ry="36.25"
- d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
- transform="translate(449.49554,74.915393)" />
- <path
- style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
- d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
- id="path8001"
- sodipodi:nodetypes="cccccccccc"
- clip-path="url(#clipPath8616)"
- transform="translate(276,136)" />
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
- d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
- id="path8003"
- sodipodi:nodetypes="czzcc" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8005"
- sodipodi:cx="410"
- sodipodi:cy="306.64789"
- sodipodi:rx="23.214285"
- sodipodi:ry="23.214285"
- d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
- transform="translate(449.67411,74.915393)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
- id="path8007"
- sodipodi:cx="414.28571"
- sodipodi:cy="303.07648"
- sodipodi:rx="7.5"
- sodipodi:ry="7.5"
- d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
- transform="translate(451.99554,73.486821)" />
- <path
- style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
- id="path8009"
- sodipodi:nodetypes="czzzczc" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g8011"
- transform="translate(780.74553,74.55825)">
- <path
- transform="translate(-329.81481,0)"
- clip-path="url(#clipPath3999)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8013"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
- style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
- <path
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
- d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
- sodipodi:ry="134.00607"
- sodipodi:rx="64.715881"
- sodipodi:cy="338.07648"
- sodipodi:cx="183.57143"
- id="path8015"
- style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
- d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
- sodipodi:ry="134.00607"
- sodipodi:rx="64.715881"
- sodipodi:cy="338.07648"
- sodipodi:cx="183.57143"
- id="path8017"
- style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(-329.81481,3e-7)"
- clip-path="url(#clipPath3999)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8019"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
- </g>
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8021"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(452.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
- id="path8023"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(450.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8025"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(450.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
- id="path8027"
- sodipodi:cx="429.56738"
- sodipodi:cy="377.42877"
- sodipodi:rx="72.079735"
- sodipodi:ry="44.547726"
- d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
- transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
- inkscape:transform-center-x="-47.231976"
- inkscape:transform-center-y="-3.6935079" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
- id="path8029"
- sodipodi:cx="437.6991"
- sodipodi:cy="391.21735"
- sodipodi:rx="36.611931"
- sodipodi:ry="22.627417"
- d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
- transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
- inkscape:transform-center-x="-20.955902"
- inkscape:transform-center-y="-13.056625" />
- <g
- transform="translate(450.03125,73.843964)"
- id="g8031"
- style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
- <path
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8033"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(13.125009,8.1249913)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8035"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(32.946437,7.4999913)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8037"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(24.910723,-10.267866)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8039"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(47.589294,-0.6250087)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8041"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- </g>
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
- id="path8043"
- sodipodi:nodetypes="ccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
- id="path8045"
- sodipodi:nodetypes="cccccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
- id="path8047"
- sodipodi:nodetypes="ccccccccccccc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
- d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
- id="path8049"
- clip-path="url(#clipPath8514)"
- transform="translate(276,136)" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
- id="path8051" />
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
- d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
- id="path8053"
- clip-path="url(#clipPath8610)"
- sodipodi:nodetypes="cccccscccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
- id="path8055"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
- d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
- id="path8057"
- clip-path="url(#clipPath8622)"
- sodipodi:nodetypes="cccccccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
- d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
- id="path8059"
- clip-path="url(#clipPath8906)"
- sodipodi:nodetypes="cczcccccc"
- transform="translate(276,136)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
- d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
- id="path8061"
- sodipodi:nodetypes="cccccccccccc"
- clip-path="url(#clipPath3602)" />
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
- id="path8063"
- sodipodi:nodetypes="czzzzzzzzcc" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
- d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
- id="path8065"
- sodipodi:nodetypes="czczzcc"
- clip-path="url(#clipPath3992)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="opacity:1;display:inline;enable-background:new"
- id="g8067"
- clip-path="url(#clipPath3986)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677)"
- id="g8069">
- <g
- style="filter:url(#filter3785)"
- id="g8071">
- <path
- sodipodi:nodetypes="czzccccc"
- id="path8073"
- d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8075"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="opacity:0.18000004;display:inline;enable-background:new"
- id="g8077">
- <g
- style="filter:url(#filter3785)"
- id="g8079">
- <path
- sodipodi:nodetypes="czzccccc"
- id="path8081"
- d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8083"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
- d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
- id="path8085"
- clip-path="url(#clipPath3722)"
- sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g8087"
- mask="url(#mask7704)"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-185.09603"
- inkscape:transform-center-y="-12.859654">
- <path
- transform="translate(8.0045714e-2,-3.125e-2)"
- style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
- id="path8089"
- sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
- <g
- clip-path="url(#clipPath7421)"
- id="g8091">
- <path
- id="path8093"
- d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- id="path8095"
- d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
- <path
- id="path8097"
- d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
- <path
- id="path8099"
- d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
- <path
- id="path8101"
- d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- id="path8103"
- d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
- <path
- id="path8105"
- d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
- <path
- id="path8107"
- d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
- <path
- id="path8109"
- d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
- <path
- id="path8111"
- d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
- <path
- id="path8113"
- d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
- <path
- id="path8115"
- d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
- <path
- id="path8117"
- d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
- <path
- id="path8119"
- d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
- <g
- id="g8121"
- style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8123"
- d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8125"
- d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8127"
- d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8129"
- d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8131"
- d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8133"
- d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8135"
- d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.9269042"
- inkscape:transform-center-x="13.64141"
- sodipodi:nodetypes="czzzczzc"
- id="path8137"
- d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.1542119"
- inkscape:transform-center-x="13.55068"
- sodipodi:nodetypes="czzzczzc"
- id="path8139"
- d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.4740887"
- inkscape:transform-center-x="13.41151"
- sodipodi:nodetypes="czzzczzc"
- id="path8141"
- d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.79376"
- inkscape:transform-center-x="13.258805"
- sodipodi:nodetypes="czzzczzc"
- id="path8143"
- d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8145"
- d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8147"
- d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8149"
- d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8151"
- d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8153"
- d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8155"
- d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8157"
- d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8159"
- d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8161"
- d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8163"
- d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.1360724"
- inkscape:transform-center-x="13.55813"
- sodipodi:nodetypes="czzzczzc"
- id="path8165"
- d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.6370147"
- inkscape:transform-center-x="13.74758"
- sodipodi:nodetypes="czzzczzc"
- id="path8167"
- d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.4842392"
- inkscape:transform-center-x="13.79933"
- sodipodi:nodetypes="czzzczzc"
- id="path8169"
- d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czczc"
- id="path8171"
- d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- </g>
- <path
- id="path8173"
- d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- id="path8175"
- d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
- <path
- id="path8177"
- d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
- <path
- id="path8179"
- d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
- <path
- id="path8181"
- d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- id="path8183"
- d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
- <path
- id="path8185"
- d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
- <path
- id="path8187"
- d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
- <path
- id="path8189"
- d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
- <path
- id="path8191"
- d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
- <path
- id="path8193"
- d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
- <path
- id="path8195"
- d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
- <path
- id="path8197"
- d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
- <path
- id="path8199"
- d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
- </g>
- </g>
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
- id="path8201"
- sodipodi:nodetypes="ccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
- id="path8203"
- sodipodi:nodetypes="ccccccccccc" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer15"
- inkscape:label="Feet"
- style="display:inline">
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
- d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
- id="path8994" />
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
- id="path4189"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
- d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
- id="path4191"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
- d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
- id="path4193"
- clip-path="url(#clipPath3677)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <g
- id="g3617"
- clip-path="url(#clipPath3622)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
- id="path4195"
- d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
- <path
- sodipodi:nodetypes="ccccccccccccc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
- id="path4197"
- d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
- </g>
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
- d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
- id="path4199"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
- <path
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
- d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
- id="path4201"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
- d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
- id="path4203"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
- d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
- id="path4205"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <g
- id="g8317"
- style="filter:url(#filter8333)"
- clip-path="url(#clipPath8338)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4209"
- d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="757.19519"
- x="-55"
- height="177"
- width="182"
- id="rect8315"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g8346"
- style="filter:url(#filter8354)"
- clip-path="url(#clipPath8359)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4207"
- d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="696.19519"
- x="-22"
- height="176"
- width="165"
- id="rect8344"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer16"
- inkscape:label="Left Foot"
- style="display:inline">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
- id="path8848"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
- d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
- id="path3635"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
- d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
- id="path3669"
- clip-path="url(#clipPath3677)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
- <g
- id="g3628"
- clip-path="url(#clipPath3636)"
- transform="translate(276,136)">
- <path
- id="path8988"
- d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
- <path
- id="path8990"
- d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
- </g>
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
- d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
- id="path8992" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
- d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
- id="path4149"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
- d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
- id="path3902"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
- d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
- id="path4135"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <g
- id="g8367"
- style="filter:url(#filter8379)"
- clip-path="url(#clipPath8392)"
- transform="translate(276,136)">
- <path
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4145"
- d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="650.19098"
- x="877.51953"
- height="172.53406"
- width="123.03658"
- id="rect8365"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g8400"
- style="filter:url(#filter8404)"
- clip-path="url(#clipPath8417)"
- transform="translate(276,136)">
- <path
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4147"
- d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="677.06104"
- x="924.89569"
- height="125.1579"
- width="142.12846"
- id="rect8398"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
-</svg>
-Tux is taking a three month sabbatical to work as a barber, so Tuz is
-standing in. He's taken pains to ensure you'll hardly notice.
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet). It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist.
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+ http://www.isc.tamu.edu/~lewing/linux/
-Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA.
- Locking functions.
- Interrupt disabling functions.
+ - Sleep and wake-up functions.
- Miscellaneous functions.
(*) Inter-CPU locking barrier effects.
other means.
+SLEEP AND WAKE-UP FUNCTIONS
+---------------------------
+
+Sleeping and waking on an event flagged in global data can be viewed as an
+interaction between two pieces of data: the task state of the task waiting for
+the event and the global data used to indicate the event. To make sure that
+these appear to happen in the right order, the primitives to begin the process
+of going to sleep, and the primitives to initiate a wake up imply certain
+barriers.
+
+Firstly, the sleeper normally follows something like this sequence of events:
+
+ for (;;) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ if (event_indicated)
+ break;
+ schedule();
+ }
+
+A general memory barrier is interpolated automatically by set_current_state()
+after it has altered the task state:
+
+ CPU 1
+ ===============================
+ set_current_state();
+ set_mb();
+ STORE current->state
+ <general barrier>
+ LOAD event_indicated
+
+set_current_state() may be wrapped by:
+
+ prepare_to_wait();
+ prepare_to_wait_exclusive();
+
+which therefore also imply a general memory barrier after setting the state.
+The whole sequence above is available in various canned forms, all of which
+interpolate the memory barrier in the right place:
+
+ wait_event();
+ wait_event_interruptible();
+ wait_event_interruptible_exclusive();
+ wait_event_interruptible_timeout();
+ wait_event_killable();
+ wait_event_timeout();
+ wait_on_bit();
+ wait_on_bit_lock();
+
+
+Secondly, code that performs a wake up normally follows something like this:
+
+ event_indicated = 1;
+ wake_up(&event_wait_queue);
+
+or:
+
+ event_indicated = 1;
+ wake_up_process(event_daemon);
+
+A write memory barrier is implied by wake_up() and co. if and only if they wake
+something up. The barrier occurs before the task state is cleared, and so sits
+between the STORE to indicate the event and the STORE to set TASK_RUNNING:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ set_current_state(); STORE event_indicated
+ set_mb(); wake_up();
+ STORE current->state <write barrier>
+ <general barrier> STORE current->state
+ LOAD event_indicated
+
+The available waker functions include:
+
+ complete();
+ wake_up();
+ wake_up_all();
+ wake_up_bit();
+ wake_up_interruptible();
+ wake_up_interruptible_all();
+ wake_up_interruptible_nr();
+ wake_up_interruptible_poll();
+ wake_up_interruptible_sync();
+ wake_up_interruptible_sync_poll();
+ wake_up_locked();
+ wake_up_locked_poll();
+ wake_up_nr();
+ wake_up_poll();
+ wake_up_process();
+
+
+[!] Note that the memory barriers implied by the sleeper and the waker do _not_
+order multiple stores before the wake-up with respect to loads of those stored
+values after the sleeper has called set_current_state(). For instance, if the
+sleeper does:
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (event_indicated)
+ break;
+ __set_current_state(TASK_RUNNING);
+ do_something(my_data);
+
+and the waker does:
+
+ my_data = value;
+ event_indicated = 1;
+ wake_up(&event_wait_queue);
+
+there's no guarantee that the change to event_indicated will be perceived by
+the sleeper as coming after the change to my_data. In such a circumstance, the
+code on both sides must interpolate its own memory barriers between the
+separate data accesses. Thus the above sleeper ought to do:
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (event_indicated) {
+ smp_rmb();
+ do_something(my_data);
+ }
+
+and the waker should do:
+
+ my_data = value;
+ smp_wmb();
+ event_indicated = 1;
+ wake_up(&event_wait_queue);
+
+
MISCELLANEOUS FUNCTIONS
-----------------------
Under normal operation, memory operation reordering is generally not going to
be a problem as a single-threaded linear piece of code will still appear to
-work correctly, even if it's in an SMP kernel. There are, however, three
+work correctly, even if it's in an SMP kernel. There are, however, four
circumstances in which reordering definitely _could_ be a problem:
(*) Interprocessor interaction.
To add ARP targets:
# echo +192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
# echo +192.168.0.101 > /sys/class/net/bond0/bonding/arp_ip_target
- NOTE: up to 10 target addresses may be specified.
+ NOTE: up to 16 target addresses may be specified.
To remove an ARP target:
# echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
-UNDOCUMENTED:
/proc/sys/net/core/*
- dev_weight FIXME
+dev_weight - INTEGER
+ The maximum number of packets that kernel can handle on a NAPI
+ interrupt, it's a Per-CPU variable.
+
+ Default: 64
/proc/sys/net/unix/*
- max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+ The maximum length of dgram socket receive queue
+
+ Default: 10
+
+
+UNDOCUMENTED:
/proc/sys/net/irda/*
fast_poll_increase FIXME
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
- c) CFI or JEDEC memory-mapped NOR flash
- d) 4xx/Axon EMAC ethernet nodes
- e) Xilinx IP cores
- f) USB EHCI controllers
- g) MDIO on GPIOs
- h) SPI busses
+ c) 4xx/Axon EMAC ethernet nodes
+ d) Xilinx IP cores
+ e) USB EHCI controllers
+ f) MDIO on GPIOs
+ g) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
translation of SOC addresses for memory mapped SOC registers.
- bus-frequency: Contains the bus frequency for the SOC node.
Typically, the value of this field is filled in by the boot
- loader.
+ loader.
Recommended properties:
device_type = "open-pic";
};
- c) CFI or JEDEC memory-mapped NOR flash
-
- Flash chips (Memory Technology Devices) are often used for solid state
- file systems on embedded devices.
-
- - compatible : should contain the specific model of flash chip(s)
- used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range of the flash chip
- - bank-width : Width (in bytes) of the flash bank. Equal to the
- device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip. If
- omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
- sub-nodes representing partitions (see below). In this case
- both #address-cells and #size-cells must be equal to 1.
-
- For JEDEC compatible devices, the following additional properties
- are defined:
-
- - vendor-id : Contains the flash chip's vendor id (1 byte).
- - device-id : Contains the flash chip's device id (1 byte).
-
- In addition to the information on the flash bank itself, the
- device tree may optionally contain additional information
- describing partitions of the flash address space. This can be
- used on platforms which have strong conventions about which
- portions of the flash are used for what purposes, but which don't
- use an on-flash partition table such as RedBoot.
-
- Each partition is represented as a sub-node of the flash device.
- Each node's name represents the name of the corresponding
- partition of the flash device.
-
- Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
- If omitted, the label is taken from the node name (excluding
- the unit address).
- - read-only : (optional) This parameter, if present, is a hint to
- Linux that this flash partition should only be mounted
- read-only. This is usually used for flash partitions
- containing early-boot firmware images or data which should not
- be clobbered.
-
- Example:
-
- flash@ff000000 {
- compatible = "amd,am29lv128ml", "cfi-flash";
- reg = <ff000000 01000000>;
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- fs@0 {
- label = "fs";
- reg = <0 f80000>;
- };
- firmware@f80000 {
- label ="firmware";
- reg = <f80000 80000>;
- read-only;
- };
- };
-
- d) 4xx/Axon EMAC ethernet nodes
+ c) 4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
available.
For Axon: 0x0000012a
- e) Xilinx IP cores
+ d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
-
+
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
- f) USB EHCI controllers
+ e) USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
big-endian;
};
- g) MDIO on GPIOs
+ f) MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
&qe_pio_c 6>;
};
- h) SPI (Serial Peripheral Interface) busses
+ g) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
Recommended properties :
- - compatible : Should be "fsl-i2c" for parts compatible with
- Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+ be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+ e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+ should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
- a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
- uses the FSL 5200 clocking mechanism.
-
-Example :
- i2c@3000 {
- interrupt-parent = <40000>;
- interrupts = <1b 3>;
- reg = <3000 18>;
- device_type = "i2c";
- compatible = "fsl-i2c";
- dfsrr;
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+ from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Examples :
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,preserve-clocking;
};
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <400000>;
+ };
+
--- /dev/null
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+ used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+ It's possible to (optionally) define multiple "reg" tuples so that
+ non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank. Equal to the
+ device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip. If
+ omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+ sub-nodes representing partitions (see below). In this case
+ both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space. This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+ If omitted, the label is taken from the node name (excluding
+ the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+ Linux that this flash partition should only be mounted
+ read-only. This is usually used for flash partitions
+ containing early-boot firmware images or data which should not
+ be clobbered.
+
+Example:
+
+ flash@ff000000 {
+ compatible = "amd,am29lv128ml", "cfi-flash";
+ reg = <ff000000 01000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ fs@0 {
+ label = "fs";
+ reg = <0 f80000>;
+ };
+ firmware@f80000 {
+ label ="firmware";
+ reg = <f80000 80000>;
+ read-only;
+ };
+ };
+
+Here an example with multiple "reg" tuples:
+
+ flash@f0000000,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,PC48F4400P0VB", "cfi-flash";
+ reg = <0 0x00000000 0x02000000
+ 0 0x02000000 0x02000000>;
+ bank-width = <2>;
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
CONTENTS
========
+0. WARNING
1. Overview
1.1 The problem
1.2 The solution
3. Future plans
+0. WARNING
+==========
+
+ Fiddling with these settings can result in an unstable system, the knobs are
+ root only and assumes root knows what he is doing.
+
+Most notable:
+
+ * very small values in sched_rt_period_us can result in an unstable
+ system when the period is smaller than either the available hrtimer
+ resolution, or the time it takes to handle the budget refresh itself.
+
+ * very small values in sched_rt_runtime_us can result in an unstable
+ system when the runtime is so small the system has difficulty making
+ forward progress (NOTE: the migration thread and kstopmachine both
+ are real-time processes).
+
1. Overview
===========
Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
the biggest challenge as the current linux PI infrastructure is geared towards
-the limited static priority levels 0-139. With deadline scheduling you need to
+the limited static priority levels 0-99. With deadline scheduling you need to
do deadline inheritance (since priority is inversely proportional to the
deadline delta (deadline - now).
ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
+ 5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
auto BIOS setup (default)
What `model` option values are available depends on the codec chip.
Check your codec chip from the codec proc file (see "Codec Proc-File"
section below). It will show the vendor/product name of your codec
-chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+chip. Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
the section of HD-audio driver. You can find a list of codecs
and `model` options belonging to each codec. For example, for Realtek
ALC262 codec chip, pass `model=ultra` for devices that are compatible
Thus, the first thing you can do for any brand-new, unsupported and
non-working HD-audio hardware is to check HD-audio codec and several
-different `model` option values. If you have a luck, some of them
+different `model` option values. If you have any luck, some of them
might suit with your device well.
Some codecs such as ALC880 have a special model option `model=test`.
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
+ Since 2.6.30, this option also enables the hwptr check using
+ jiffies. This detects spontaneous invalid pointer callback
+ values, but can be lead to too much corrections for a (mostly
+ buggy) hardware that doesn't give smooth pointer updates.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
vs cpu-endian vs whatever), and there the constant "0" really _is_
special.
+__bitwise__ - to be used for relatively compact stuff (gfp_t, etc.) that
+is mostly warning-free and is supposed to stay that way. Warnings will
+be generated without __CHECK_ENDIAN__.
+
+__bitwise - noisy stuff; in particular, __le*/__be* are that. We really
+don't want to drown in noise unless we'd explicitly asked for it.
+
+
Getting sparse
~~~~~~~~~~~~~~
This sets up the device clock rate, SPI mode, and word sizes.
Drivers may change the defaults provided by board_info, and then
call spi_setup(spi) to invoke this routine. It may sleep.
+
Unless each SPI slave has its own configuration registers, don't
change them right away ... otherwise drivers could corrupt I/O
that's in progress for other SPI devices.
+ ** BUG ALERT: for some reason the first version of
+ ** many spi_master drivers seems to get this wrong.
+ ** When you code setup(), ASSUME that the controller
+ ** is actively processing transfers for another device.
+
master->transfer(struct spi_device *spi, struct spi_message *message)
This must not sleep. Its responsibility is arrange that the
transfer happens and its complete() callback is issued. The two
There is only one file in this directory.
unix_dgram_qlen limits the max number of datagrams queued in Unix domain
-socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
3. /proc/sys/net/ipv4 - IPV4 settings
- nr_hugepages
- nr_overcommit_hugepages
- nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
- nr_trim_pages (only if CONFIG_MMU=n)
- numa_zonelist_order
- oom_dump_tasks
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
==============================================================
dirty_expire_centisecs
==============================================================
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2. The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created. The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8. The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
overcommit_memory:
This value contains a flag that enables memory overcommitment.
"devices" directory at /sys/subsystem/<name>/devices.
If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
- ignored. If it does not exist, you have always to scan all three
+ ignored. If it does not exist, you always have to scan all three
places, as the kernel is free to move a subsystem from one place to
the other, as long as the devices are still reachable by the same
subsystem name.
--- /dev/null
+--- What is TOMOYO? ---
+
+TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
+
+LiveCD-based tutorials are available at
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+Though these tutorials use non-LSM version of TOMOYO, they are useful for you
+to know what TOMOYO is.
+
+--- How to enable TOMOYO? ---
+
+Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
+kernel's command line.
+
+Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+
+--- Where is documentation? ---
+
+User <-> Kernel interface documentation is available at
+http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+
+Materials we prepared for seminars and symposiums are available at
+http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+Below lists are chosen from three aspects.
+
+What is TOMOYO?
+ TOMOYO Linux Overview
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+ TOMOYO Linux: pragmatic and manageable security for Linux
+ http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+ TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
+ http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+
+What can TOMOYO do?
+ Deep inside TOMOYO Linux
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+ The role of "pathname based access control" in security.
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+
+History of TOMOYO?
+ Realities of Mainlining
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf
+
+--- What is future plan? ---
+
+We believe that inode based security and name based security are complementary
+and both should be used together. But unfortunately, so far, we cannot enable
+multiple LSM modules at the same time. We feel sorry that you have to give up
+SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
+
+We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
+to port non-LSM version's functionalities to LSM versions.
--- /dev/null
+ ftrace - Function Tracer
+ ========================
+
+Copyright 2008 Red Hat Inc.
+ Author: Steven Rostedt <srostedt@redhat.com>
+ License: The GNU Free Documentation License, Version 1.2
+ (dual licensed under the GPL v2)
+Reviewers: Elias Oltmanns, Randy Dunlap, Andrew Morton,
+ John Kacur, and David Teigland.
+
+Written for: 2.6.28-rc2
+
+Introduction
+------------
+
+Ftrace is an internal tracer designed to help out developers and
+designers of systems to find what is going on inside the kernel.
+It can be used for debugging or analyzing latencies and
+performance issues that take place outside of user-space.
+
+Although ftrace is the function tracer, it also includes an
+infrastructure that allows for other types of tracing. Some of
+the tracers that are currently in ftrace include a tracer to
+trace context switches, the time it takes for a high priority
+task to run after it was woken up, the time interrupts are
+disabled, and more (ftrace allows for tracer plugins, which
+means that the list of tracers can always grow).
+
+
+The File System
+---------------
+
+Ftrace uses the debugfs file system to hold the control files as
+well as the files to display output.
+
+To mount the debugfs system:
+
+ # mkdir /debug
+ # mount -t debugfs nodev /debug
+
+( Note: it is more common to mount at /sys/kernel/debug, but for
+ simplicity this document will use /debug)
+
+That's it! (assuming that you have ftrace configured into your kernel)
+
+After mounting the debugfs, you can see a directory called
+"tracing". This directory contains the control and output files
+of ftrace. Here is a list of some of the key files:
+
+
+ Note: all time values are in microseconds.
+
+ current_tracer:
+
+ This is used to set or display the current tracer
+ that is configured.
+
+ available_tracers:
+
+ This holds the different types of tracers that
+ have been compiled into the kernel. The
+ tracers listed here can be configured by
+ echoing their name into current_tracer.
+
+ tracing_enabled:
+
+ This sets or displays whether the current_tracer
+ is activated and tracing or not. Echo 0 into this
+ file to disable the tracer or 1 to enable it.
+
+ trace:
+
+ This file holds the output of the trace in a human
+ readable format (described below).
+
+ latency_trace:
+
+ This file shows the same trace but the information
+ is organized more to display possible latencies
+ in the system (described below).
+
+ trace_pipe:
+
+ The output is the same as the "trace" file but this
+ file is meant to be streamed with live tracing.
+ Reads from this file will block until new data
+ is retrieved. Unlike the "trace" and "latency_trace"
+ files, this file is a consumer. This means reading
+ from this file causes sequential reads to display
+ more current data. Once data is read from this
+ file, it is consumed, and will not be read
+ again with a sequential read. The "trace" and
+ "latency_trace" files are static, and if the
+ tracer is not adding more data, they will display
+ the same information every time they are read.
+
+ trace_options:
+
+ This file lets the user control the amount of data
+ that is displayed in one of the above output
+ files.
+
+ tracing_max_latency:
+
+ Some of the tracers record the max latency.
+ For example, the time interrupts are disabled.
+ This time is saved in this file. The max trace
+ will also be stored, and displayed by either
+ "trace" or "latency_trace". A new max trace will
+ only be recorded if the latency is greater than
+ the value in this file. (in microseconds)
+
+ buffer_size_kb:
+
+ This sets or displays the number of kilobytes each CPU
+ buffer can hold. The tracer buffers are the same size
+ for each CPU. The displayed number is the size of the
+ CPU buffer and not total size of all buffers. The
+ trace buffers are allocated in pages (blocks of memory
+ that the kernel uses for allocation, usually 4 KB in size).
+ If the last page allocated has room for more bytes
+ than requested, the rest of the page will be used,
+ making the actual allocation bigger than requested.
+ ( Note, the size may not be a multiple of the page size
+ due to buffer managment overhead. )
+
+ This can only be updated when the current_tracer
+ is set to "nop".
+
+ tracing_cpumask:
+
+ This is a mask that lets the user only trace
+ on specified CPUS. The format is a hex string
+ representing the CPUS.
+
+ set_ftrace_filter:
+
+ When dynamic ftrace is configured in (see the
+ section below "dynamic ftrace"), the code is dynamically
+ modified (code text rewrite) to disable calling of the
+ function profiler (mcount). This lets tracing be configured
+ in with practically no overhead in performance. This also
+ has a side effect of enabling or disabling specific functions
+ to be traced. Echoing names of functions into this file
+ will limit the trace to only those functions.
+
+ set_ftrace_notrace:
+
+ This has an effect opposite to that of
+ set_ftrace_filter. Any function that is added here will not
+ be traced. If a function exists in both set_ftrace_filter
+ and set_ftrace_notrace, the function will _not_ be traced.
+
+ set_ftrace_pid:
+
+ Have the function tracer only trace a single thread.
+
+ set_graph_function:
+
+ Set a "trigger" function where tracing should start
+ with the function graph tracer (See the section
+ "dynamic ftrace" for more details).
+
+ available_filter_functions:
+
+ This lists the functions that ftrace
+ has processed and can trace. These are the function
+ names that you can pass to "set_ftrace_filter" or
+ "set_ftrace_notrace". (See the section "dynamic ftrace"
+ below for more details.)
+
+
+The Tracers
+-----------
+
+Here is the list of current tracers that may be configured.
+
+ "function"
+
+ Function call tracer to trace all kernel functions.
+
+ "function_graph_tracer"
+
+ Similar to the function tracer except that the
+ function tracer probes the functions on their entry
+ whereas the function graph tracer traces on both entry
+ and exit of the functions. It then provides the ability
+ to draw a graph of function calls similar to C code
+ source.
+
+ "sched_switch"
+
+ Traces the context switches and wakeups between tasks.
+
+ "irqsoff"
+
+ Traces the areas that disable interrupts and saves
+ the trace with the longest max latency.
+ See tracing_max_latency. When a new max is recorded,
+ it replaces the old trace. It is best to view this
+ trace via the latency_trace file.
+
+ "preemptoff"
+
+ Similar to irqsoff but traces and records the amount of
+ time for which preemption is disabled.
+
+ "preemptirqsoff"
+
+ Similar to irqsoff and preemptoff, but traces and
+ records the largest time for which irqs and/or preemption
+ is disabled.
+
+ "wakeup"
+
+ Traces and records the max latency that it takes for
+ the highest priority task to get scheduled after
+ it has been woken up.
+
+ "hw-branch-tracer"
+
+ Uses the BTS CPU feature on x86 CPUs to traces all
+ branches executed.
+
+ "nop"
+
+ This is the "trace nothing" tracer. To remove all
+ tracers from tracing simply echo "nop" into
+ current_tracer.
+
+
+Examples of using the tracer
+----------------------------
+
+Here are typical examples of using the tracers when controlling
+them only with the debugfs interface (without using any
+user-land utilities).
+
+Output format:
+--------------
+
+Here is an example of the output format of the file "trace"
+
+ --------
+# tracer: function
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4251 [01] 10152.583854: path_put <-path_walk
+ bash-4251 [01] 10152.583855: dput <-path_put
+ bash-4251 [01] 10152.583855: _atomic_dec_and_lock <-dput
+ --------
+
+A header is printed with the tracer name that is represented by
+the trace. In this case the tracer is "function". Then a header
+showing the format. Task name "bash", the task PID "4251", the
+CPU that it was running on "01", the timestamp in <secs>.<usecs>
+format, the function name that was traced "path_put" and the
+parent function that called this function "path_walk". The
+timestamp is the time at which the function was entered.
+
+The sched_switch tracer also includes tracing of task wakeups
+and context switches.
+
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 2916:115:S
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R + 10:115:S
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:R ==> 10:115:R
+ events/1-10 [01] 1453.070013: 10:115:S ==> 2916:115:R
+ kondemand/1-2916 [01] 1453.070013: 2916:115:S ==> 7:115:R
+ ksoftirqd/1-7 [01] 1453.070013: 7:115:S ==> 0:140:R
+
+Wake ups are represented by a "+" and the context switches are
+shown as "==>". The format is:
+
+ Context switches:
+
+ Previous task Next Task
+
+ <pid>:<prio>:<state> ==> <pid>:<prio>:<state>
+
+ Wake ups:
+
+ Current task Task waking up
+
+ <pid>:<prio>:<state> + <pid>:<prio>:<state>
+
+The prio is the internal kernel priority, which is the inverse
+of the priority that is usually displayed by user-space tools.
+Zero represents the highest priority (99). Prio 100 starts the
+"nice" priorities with 100 being equal to nice -20 and 139 being
+nice 19. The prio "140" is reserved for the idle task which is
+the lowest priority thread (pid 0).
+
+
+Latency trace format
+--------------------
+
+For traces that display latency times, the latency_trace file
+gives somewhat more information to see why a latency happened.
+Here is a typical trace.
+
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 97 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: swapper-0 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: apic_timer_interrupt
+ => ended at: do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ <idle>-0 0d..1 0us+: trace_hardirqs_off_thunk (apic_timer_interrupt)
+ <idle>-0 0d.s. 97us : __do_softirq (do_softirq)
+ <idle>-0 0d.s1 98us : trace_hardirqs_on (do_softirq)
+
+
+This shows that the current tracer is "irqsoff" tracing the time
+for which interrupts were disabled. It gives the trace version
+and the version of the kernel upon which this was executed on
+(2.6.26-rc8). Then it displays the max latency in microsecs (97
+us). The number of trace entries displayed and the total number
+recorded (both are three: #3/3). The type of preemption that was
+used (PREEMPT). VP, KP, SP, and HP are always zero and are
+reserved for later use. #P is the number of online CPUS (#P:2).
+
+The task is the process that was running when the latency
+occurred. (swapper pid: 0).
+
+The start and stop (the functions in which the interrupts were
+disabled and enabled respectively) that caused the latencies:
+
+ apic_timer_interrupt is where the interrupts were disabled.
+ do_softirq is where they were enabled again.
+
+The next lines after the header are the trace itself. The header
+explains which is which.
+
+ cmd: The name of the process in the trace.
+
+ pid: The PID of that process.
+
+ CPU#: The CPU which the process was running on.
+
+ irqs-off: 'd' interrupts are disabled. '.' otherwise.
+ Note: If the architecture does not support a way to
+ read the irq flags variable, an 'X' will always
+ be printed here.
+
+ need-resched: 'N' task need_resched is set, '.' otherwise.
+
+ hardirq/softirq:
+ 'H' - hard irq occurred inside a softirq.
+ 'h' - hard irq is running
+ 's' - soft irq is running
+ '.' - normal context.
+
+ preempt-depth: The level of preempt_disabled
+
+The above is mostly meaningful for kernel developers.
+
+ time: This differs from the trace file output. The trace file output
+ includes an absolute timestamp. The timestamp used by the
+ latency_trace file is relative to the start of the trace.
+
+ delay: This is just to help catch your eye a bit better. And
+ needs to be fixed to be only relative to the same CPU.
+ The marks are determined by the difference between this
+ current trace and the next trace.
+ '!' - greater than preempt_mark_thresh (default 100)
+ '+' - greater than 1 microsecond
+ ' ' - less than or equal to 1 microsecond.
+
+ The rest is the same as the 'trace' file.
+
+
+trace_options
+-------------
+
+The trace_options file is used to control what gets printed in
+the trace output. To see what is available, simply cat the file:
+
+ cat /debug/tracing/trace_options
+ print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
+ noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
+
+To disable one of the options, echo in the option prepended with
+"no".
+
+ echo noprint-parent > /debug/tracing/trace_options
+
+To enable an option, leave off the "no".
+
+ echo sym-offset > /debug/tracing/trace_options
+
+Here are the available options:
+
+ print-parent - On function traces, display the calling (parent)
+ function as well as the function being traced.
+
+ print-parent:
+ bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul
+
+ noprint-parent:
+ bash-4000 [01] 1477.606694: simple_strtoul
+
+
+ sym-offset - Display not only the function name, but also the
+ offset in the function. For example, instead of
+ seeing just "ktime_get", you will see
+ "ktime_get+0xb/0x20".
+
+ sym-offset:
+ bash-4000 [01] 1477.606694: simple_strtoul+0x6/0xa0
+
+ sym-addr - this will also display the function address as well
+ as the function name.
+
+ sym-addr:
+ bash-4000 [01] 1477.606694: simple_strtoul <c0339346>
+
+ verbose - This deals with the latency_trace file.
+
+ bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \
+ (+0.000ms): simple_strtoul (strict_strtoul)
+
+ raw - This will display raw numbers. This option is best for
+ use with user applications that can translate the raw
+ numbers better than having it done in the kernel.
+
+ hex - Similar to raw, but the numbers will be in a hexadecimal
+ format.
+
+ bin - This will print out the formats in raw binary.
+
+ block - TBD (needs update)
+
+ stacktrace - This is one of the options that changes the trace
+ itself. When a trace is recorded, so is the stack
+ of functions. This allows for back traces of
+ trace sites.
+
+ userstacktrace - This option changes the trace. It records a
+ stacktrace of the current userspace thread.
+
+ sym-userobj - when user stacktrace are enabled, look up which
+ object the address belongs to, and print a
+ relative address. This is especially useful when
+ ASLR is on, otherwise you don't get a chance to
+ resolve the address to object/file/line after
+ the app is no longer running
+
+ The lookup is performed when you read
+ trace,trace_pipe,latency_trace. Example:
+
+ a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
+x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
+
+ sched-tree - trace all tasks that are on the runqueue, at
+ every scheduling event. Will add overhead if
+ there's a lot of tasks running at once.
+
+
+sched_switch
+------------
+
+This tracer simply records schedule switches. Here is an example
+of how to use it.
+
+ # echo sched_switch > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # sleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+
+# tracer: sched_switch
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-3997 [01] 240.132281: 3997:120:R + 4055:120:R
+ bash-3997 [01] 240.132284: 3997:120:R ==> 4055:120:R
+ sleep-4055 [01] 240.132371: 4055:120:S ==> 3997:120:R
+ bash-3997 [01] 240.132454: 3997:120:R + 4055:120:S
+ bash-3997 [01] 240.132457: 3997:120:R ==> 4055:120:R
+ sleep-4055 [01] 240.132460: 4055:120:D ==> 3997:120:R
+ bash-3997 [01] 240.132463: 3997:120:R + 4055:120:D
+ bash-3997 [01] 240.132465: 3997:120:R ==> 4055:120:R
+ <idle>-0 [00] 240.132589: 0:140:R + 4:115:S
+ <idle>-0 [00] 240.132591: 0:140:R ==> 4:115:R
+ ksoftirqd/0-4 [00] 240.132595: 4:115:S ==> 0:140:R
+ <idle>-0 [00] 240.132598: 0:140:R + 4:115:S
+ <idle>-0 [00] 240.132599: 0:140:R ==> 4:115:R
+ ksoftirqd/0-4 [00] 240.132603: 4:115:S ==> 0:140:R
+ sleep-4055 [01] 240.133058: 4055:120:S ==> 3997:120:R
+ [...]
+
+
+As we have discussed previously about this format, the header
+shows the name of the trace and points to the options. The
+"FUNCTION" is a misnomer since here it represents the wake ups
+and context switches.
+
+The sched_switch file only lists the wake ups (represented with
+'+') and context switches ('==>') with the previous task or
+current task first followed by the next task or task waking up.
+The format for both of these is PID:KERNEL-PRIO:TASK-STATE.
+Remember that the KERNEL-PRIO is the inverse of the actual
+priority with zero (0) being the highest priority and the nice
+values starting at 100 (nice -20). Below is a quick chart to map
+the kernel priority to user land priorities.
+
+ Kernel Space User Space
+ ===============================================================
+ 0(high) to 98(low) user RT priority 99(high) to 1(low)
+ with SCHED_RR or SCHED_FIFO
+ ---------------------------------------------------------------
+ 99 sched_priority is not used in scheduling
+ decisions(it must be specified as 0)
+ ---------------------------------------------------------------
+ 100(high) to 139(low) user nice -20(high) to 19(low)
+ ---------------------------------------------------------------
+ 140 idle task priority
+ ---------------------------------------------------------------
+
+The task states are:
+
+ R - running : wants to run, may not actually be running
+ S - sleep : process is waiting to be woken up (handles signals)
+ D - disk sleep (uninterruptible sleep) : process must be woken up
+ (ignores signals)
+ T - stopped : process suspended
+ t - traced : process is being traced (with something like gdb)
+ Z - zombie : process waiting to be cleaned up
+ X - unknown
+
+
+ftrace_enabled
+--------------
+
+The following tracers (listed below) give different output
+depending on whether or not the sysctl ftrace_enabled is set. To
+set ftrace_enabled, one can either use the sysctl function or
+set it via the proc file system interface.
+
+ sysctl kernel.ftrace_enabled=1
+
+ or
+
+ echo 1 > /proc/sys/kernel/ftrace_enabled
+
+To disable ftrace_enabled simply replace the '1' with '0' in the
+above commands.
+
+When ftrace_enabled is set the tracers will also record the
+functions that are within the trace. The descriptions of the
+tracers will also show an example with ftrace enabled.
+
+
+irqsoff
+-------
+
+When interrupts are disabled, the CPU can not react to any other
+external event (besides NMIs and SMIs). This prevents the timer
+interrupt from triggering or the mouse interrupt from letting
+the kernel know of a new mouse event. The result is a latency
+with the reaction time.
+
+The irqsoff tracer tracks the time for which interrupts are
+disabled. When a new maximum latency is hit, the tracer saves
+the trace leading up to that latency point so that every time a
+new maximum is reached, the old saved trace is discarded and the
+new trace is saved.
+
+To reset the maximum, echo 0 into tracing_max_latency. Here is
+an example:
+
+ # echo irqsoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26
+--------------------------------------------------------------------
+ latency: 12 us, #3/3, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: bash-3730 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: sys_setpgid
+ => ended at: sys_setpgid
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ bash-3730 1d... 0us : _write_lock_irq (sys_setpgid)
+ bash-3730 1d..1 1us+: _write_unlock_irq (sys_setpgid)
+ bash-3730 1d..2 14us : trace_hardirqs_on (sys_setpgid)
+
+
+Here we see that that we had a latency of 12 microsecs (which is
+very good). The _write_lock_irq in sys_setpgid disabled
+interrupts. The difference between the 12 and the displayed
+timestamp 14us occurred because the clock was incremented
+between the time of recording the max latency and the time of
+recording the function that had that latency.
+
+Note the above example had ftrace_enabled not set. If we set the
+ftrace_enabled, we get a much larger output:
+
+# tracer: irqsoff
+#
+irqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 50 us, #101/101, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: ls-4339 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: __alloc_pages_internal
+ => ended at: __alloc_pages_internal
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4339 0...1 0us+: get_page_from_freelist (__alloc_pages_internal)
+ ls-4339 0d..1 3us : rmqueue_bulk (get_page_from_freelist)
+ ls-4339 0d..1 3us : _spin_lock (rmqueue_bulk)
+ ls-4339 0d..1 4us : add_preempt_count (_spin_lock)
+ ls-4339 0d..2 4us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 5us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 5us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 6us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 6us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 7us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 7us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 8us : __rmqueue_smallest (__rmqueue)
+[...]
+ ls-4339 0d..2 46us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 47us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 47us : __rmqueue (rmqueue_bulk)
+ ls-4339 0d..2 48us : __rmqueue_smallest (__rmqueue)
+ ls-4339 0d..2 48us : __mod_zone_page_state (__rmqueue_smallest)
+ ls-4339 0d..2 49us : _spin_unlock (rmqueue_bulk)
+ ls-4339 0d..2 49us : sub_preempt_count (_spin_unlock)
+ ls-4339 0d..1 50us : get_page_from_freelist (__alloc_pages_internal)
+ ls-4339 0d..2 51us : trace_hardirqs_on (__alloc_pages_internal)
+
+
+
+Here we traced a 50 microsecond latency. But we also see all the
+functions that were called during that time. Note that by
+enabling function tracing, we incur an added overhead. This
+overhead may extend the latency times. But nevertheless, this
+trace has provided some very helpful debugging information.
+
+
+preemptoff
+----------
+
+When preemption is disabled, we may be able to receive
+interrupts but the task cannot be preempted and a higher
+priority task must wait for preemption to be enabled again
+before it can preempt a lower priority task.
+
+The preemptoff tracer traces the places that disable preemption.
+Like the irqsoff tracer, it records the maximum latency for
+which preemption was disabled. The control of preemptoff tracer
+is much like the irqsoff tracer.
+
+ # echo preemptoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: preemptoff
+#
+preemptoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 29 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: do_IRQ
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ sshd-4261 0d.h. 0us+: irq_enter (do_IRQ)
+ sshd-4261 0d.s. 29us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 30us : trace_preempt_on (__do_softirq)
+
+
+This has some more changes. Preemption was disabled when an
+interrupt came in (notice the 'h'), and was enabled while doing
+a softirq. (notice the 's'). But we also see that interrupts
+have been disabled when entering the preempt off section and
+leaving it (the 'd'). We do not know if interrupts were enabled
+in the mean time.
+
+# tracer: preemptoff
+#
+preemptoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 63 us, #87/87, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: remove_wait_queue
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ sshd-4261 0d..1 0us : _spin_lock_irqsave (remove_wait_queue)
+ sshd-4261 0d..1 1us : _spin_unlock_irqrestore (remove_wait_queue)
+ sshd-4261 0d..1 2us : do_IRQ (common_interrupt)
+ sshd-4261 0d..1 2us : irq_enter (do_IRQ)
+ sshd-4261 0d..1 2us : idle_cpu (irq_enter)
+ sshd-4261 0d..1 3us : add_preempt_count (irq_enter)
+ sshd-4261 0d.h1 3us : idle_cpu (irq_enter)
+ sshd-4261 0d.h. 4us : handle_fasteoi_irq (do_IRQ)
+[...]
+ sshd-4261 0d.h. 12us : add_preempt_count (_spin_lock)
+ sshd-4261 0d.h1 12us : ack_ioapic_quirk_irq (handle_fasteoi_irq)
+ sshd-4261 0d.h1 13us : move_native_irq (ack_ioapic_quirk_irq)
+ sshd-4261 0d.h1 13us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 14us : sub_preempt_count (_spin_unlock)
+ sshd-4261 0d.h1 14us : irq_exit (do_IRQ)
+ sshd-4261 0d.h1 15us : sub_preempt_count (irq_exit)
+ sshd-4261 0d..2 15us : do_softirq (irq_exit)
+ sshd-4261 0d... 15us : __do_softirq (do_softirq)
+ sshd-4261 0d... 16us : __local_bh_disable (__do_softirq)
+ sshd-4261 0d... 16us+: add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 20us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 21us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s5 21us : sub_preempt_count (local_bh_enable)
+[...]
+ sshd-4261 0d.s6 41us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s6 42us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s7 42us : sub_preempt_count (local_bh_enable)
+ sshd-4261 0d.s5 43us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s5 43us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s6 44us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s5 44us : add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s5 45us : sub_preempt_count (local_bh_enable)
+[...]
+ sshd-4261 0d.s. 63us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 64us : trace_preempt_on (__do_softirq)
+
+
+The above is an example of the preemptoff trace with
+ftrace_enabled set. Here we see that interrupts were disabled
+the entire time. The irq_enter code lets us know that we entered
+an interrupt 'h'. Before that, the functions being traced still
+show that it is not in an interrupt, but we can see from the
+functions themselves that this is not the case.
+
+Notice that __do_softirq when called does not have a
+preempt_count. It may seem that we missed a preempt enabling.
+What really happened is that the preempt count is held on the
+thread's stack and we switched to the softirq stack (4K stacks
+in effect). The code does not copy the preempt count, but
+because interrupts are disabled, we do not need to worry about
+it. Having a tracer like this is good for letting people know
+what really happens inside the kernel.
+
+
+preemptirqsoff
+--------------
+
+Knowing the locations that have interrupts disabled or
+preemption disabled for the longest times is helpful. But
+sometimes we would like to know when either preemption and/or
+interrupts are disabled.
+
+Consider the following code:
+
+ local_irq_disable();
+ call_function_with_irqs_off();
+ preempt_disable();
+ call_function_with_irqs_and_preemption_off();
+ local_irq_enable();
+ call_function_with_preemption_off();
+ preempt_enable();
+
+The irqsoff tracer will record the total length of
+call_function_with_irqs_off() and
+call_function_with_irqs_and_preemption_off().
+
+The preemptoff tracer will record the total length of
+call_function_with_irqs_and_preemption_off() and
+call_function_with_preemption_off().
+
+But neither will trace the time that interrupts and/or
+preemption is disabled. This total time is the time that we can
+not schedule. To record this time, use the preemptirqsoff
+tracer.
+
+Again, using this trace is much like the irqsoff and preemptoff
+tracers.
+
+ # echo preemptirqsoff > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # ls -ltr
+ [...]
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: preemptirqsoff
+#
+preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 293 us, #3/3, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: ls-4860 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: apic_timer_interrupt
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4860 0d... 0us!: trace_hardirqs_off_thunk (apic_timer_interrupt)
+ ls-4860 0d.s. 294us : _local_bh_enable (__do_softirq)
+ ls-4860 0d.s1 294us : trace_preempt_on (__do_softirq)
+
+
+
+The trace_hardirqs_off_thunk is called from assembly on x86 when
+interrupts are disabled in the assembly code. Without the
+function tracing, we do not know if interrupts were enabled
+within the preemption points. We do see that it started with
+preemption enabled.
+
+Here is a trace with ftrace_enabled set:
+
+
+# tracer: preemptirqsoff
+#
+preemptirqsoff latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 105 us, #183/183, CPU#0 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sshd-4261 (uid:0 nice:0 policy:0 rt_prio:0)
+ -----------------
+ => started at: write_chan
+ => ended at: __do_softirq
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ ls-4473 0.N.. 0us : preempt_schedule (write_chan)
+ ls-4473 0dN.1 1us : _spin_lock (schedule)
+ ls-4473 0dN.1 2us : add_preempt_count (_spin_lock)
+ ls-4473 0d..2 2us : put_prev_task_fair (schedule)
+[...]
+ ls-4473 0d..2 13us : set_normalized_timespec (ktime_get_ts)
+ ls-4473 0d..2 13us : __switch_to (schedule)
+ sshd-4261 0d..2 14us : finish_task_switch (schedule)
+ sshd-4261 0d..2 14us : _spin_unlock_irq (finish_task_switch)
+ sshd-4261 0d..1 15us : add_preempt_count (_spin_lock_irqsave)
+ sshd-4261 0d..2 16us : _spin_unlock_irqrestore (hrtick_set)
+ sshd-4261 0d..2 16us : do_IRQ (common_interrupt)
+ sshd-4261 0d..2 17us : irq_enter (do_IRQ)
+ sshd-4261 0d..2 17us : idle_cpu (irq_enter)
+ sshd-4261 0d..2 18us : add_preempt_count (irq_enter)
+ sshd-4261 0d.h2 18us : idle_cpu (irq_enter)
+ sshd-4261 0d.h. 18us : handle_fasteoi_irq (do_IRQ)
+ sshd-4261 0d.h. 19us : _spin_lock (handle_fasteoi_irq)
+ sshd-4261 0d.h. 19us : add_preempt_count (_spin_lock)
+ sshd-4261 0d.h1 20us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 20us : sub_preempt_count (_spin_unlock)
+[...]
+ sshd-4261 0d.h1 28us : _spin_unlock (handle_fasteoi_irq)
+ sshd-4261 0d.h1 29us : sub_preempt_count (_spin_unlock)
+ sshd-4261 0d.h2 29us : irq_exit (do_IRQ)
+ sshd-4261 0d.h2 29us : sub_preempt_count (irq_exit)
+ sshd-4261 0d..3 30us : do_softirq (irq_exit)
+ sshd-4261 0d... 30us : __do_softirq (do_softirq)
+ sshd-4261 0d... 31us : __local_bh_disable (__do_softirq)
+ sshd-4261 0d... 31us+: add_preempt_count (__local_bh_disable)
+ sshd-4261 0d.s4 34us : add_preempt_count (__local_bh_disable)
+[...]
+ sshd-4261 0d.s3 43us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s4 44us : sub_preempt_count (local_bh_enable_ip)
+ sshd-4261 0d.s3 44us : smp_apic_timer_interrupt (apic_timer_interrupt)
+ sshd-4261 0d.s3 45us : irq_enter (smp_apic_timer_interrupt)
+ sshd-4261 0d.s3 45us : idle_cpu (irq_enter)
+ sshd-4261 0d.s3 46us : add_preempt_count (irq_enter)
+ sshd-4261 0d.H3 46us : idle_cpu (irq_enter)
+ sshd-4261 0d.H3 47us : hrtimer_interrupt (smp_apic_timer_interrupt)
+ sshd-4261 0d.H3 47us : ktime_get (hrtimer_interrupt)
+[...]
+ sshd-4261 0d.H3 81us : tick_program_event (hrtimer_interrupt)
+ sshd-4261 0d.H3 82us : ktime_get (tick_program_event)
+ sshd-4261 0d.H3 82us : ktime_get_ts (ktime_get)
+ sshd-4261 0d.H3 83us : getnstimeofday (ktime_get_ts)
+ sshd-4261 0d.H3 83us : set_normalized_timespec (ktime_get_ts)
+ sshd-4261 0d.H3 84us : clockevents_program_event (tick_program_event)
+ sshd-4261 0d.H3 84us : lapic_next_event (clockevents_program_event)
+ sshd-4261 0d.H3 85us : irq_exit (smp_apic_timer_interrupt)
+ sshd-4261 0d.H3 85us : sub_preempt_count (irq_exit)
+ sshd-4261 0d.s4 86us : sub_preempt_count (irq_exit)
+ sshd-4261 0d.s3 86us : add_preempt_count (__local_bh_disable)
+[...]
+ sshd-4261 0d.s1 98us : sub_preempt_count (net_rx_action)
+ sshd-4261 0d.s. 99us : add_preempt_count (_spin_lock_irq)
+ sshd-4261 0d.s1 99us+: _spin_unlock_irq (run_timer_softirq)
+ sshd-4261 0d.s. 104us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s. 104us : sub_preempt_count (_local_bh_enable)
+ sshd-4261 0d.s. 105us : _local_bh_enable (__do_softirq)
+ sshd-4261 0d.s1 105us : trace_preempt_on (__do_softirq)
+
+
+This is a very interesting trace. It started with the preemption
+of the ls task. We see that the task had the "need_resched" bit
+set via the 'N' in the trace. Interrupts were disabled before
+the spin_lock at the beginning of the trace. We see that a
+schedule took place to run sshd. When the interrupts were
+enabled, we took an interrupt. On return from the interrupt
+handler, the softirq ran. We took another interrupt while
+running the softirq as we see from the capital 'H'.
+
+
+wakeup
+------
+
+In a Real-Time environment it is very important to know the
+wakeup time it takes for the highest priority task that is woken
+up to the time that it executes. This is also known as "schedule
+latency". I stress the point that this is about RT tasks. It is
+also important to know the scheduling latency of non-RT tasks,
+but the average schedule latency is better for non-RT tasks.
+Tools like LatencyTop are more appropriate for such
+measurements.
+
+Real-Time environments are interested in the worst case latency.
+That is the longest latency it takes for something to happen,
+and not the average. We can have a very fast scheduler that may
+only have a large latency once in a while, but that would not
+work well with Real-Time tasks. The wakeup tracer was designed
+to record the worst case wakeups of RT tasks. Non-RT tasks are
+not recorded because the tracer only records one worst case and
+tracing non-RT tasks that are unpredictable will overwrite the
+worst case latency of RT tasks.
+
+Since this tracer only deals with RT tasks, we will run this
+slightly differently than we did with the previous tracers.
+Instead of performing an 'ls', we will run 'sleep 1' under
+'chrt' which changes the priority of the task.
+
+ # echo wakeup > /debug/tracing/current_tracer
+ # echo 0 > /debug/tracing/tracing_max_latency
+ # echo 1 > /debug/tracing/tracing_enabled
+ # chrt -f 5 sleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/latency_trace
+# tracer: wakeup
+#
+wakeup latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 4 us, #2/2, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sleep-4901 (uid:0 nice:0 policy:1 rt_prio:5)
+ -----------------
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ <idle>-0 1d.h4 0us+: try_to_wake_up (wake_up_process)
+ <idle>-0 1d..4 4us : schedule (cpu_idle)
+
+
+Running this on an idle system, we see that it only took 4
+microseconds to perform the task switch. Note, since the trace
+marker in the schedule is before the actual "switch", we stop
+the tracing when the recorded task is about to schedule in. This
+may change if we add a new marker at the end of the scheduler.
+
+Notice that the recorded task is 'sleep' with the PID of 4901
+and it has an rt_prio of 5. This priority is user-space priority
+and not the internal kernel priority. The policy is 1 for
+SCHED_FIFO and 2 for SCHED_RR.
+
+Doing the same with chrt -r 5 and ftrace_enabled set.
+
+# tracer: wakeup
+#
+wakeup latency trace v1.1.5 on 2.6.26-rc8
+--------------------------------------------------------------------
+ latency: 50 us, #60/60, CPU#1 | (M:preempt VP:0, KP:0, SP:0 HP:0 #P:2)
+ -----------------
+ | task: sleep-4068 (uid:0 nice:0 policy:2 rt_prio:5)
+ -----------------
+
+# _------=> CPU#
+# / _-----=> irqs-off
+# | / _----=> need-resched
+# || / _---=> hardirq/softirq
+# ||| / _--=> preempt-depth
+# |||| /
+# ||||| delay
+# cmd pid ||||| time | caller
+# \ / ||||| \ | /
+ksoftirq-7 1d.H3 0us : try_to_wake_up (wake_up_process)
+ksoftirq-7 1d.H4 1us : sub_preempt_count (marker_probe_cb)
+ksoftirq-7 1d.H3 2us : check_preempt_wakeup (try_to_wake_up)
+ksoftirq-7 1d.H3 3us : update_curr (check_preempt_wakeup)
+ksoftirq-7 1d.H3 4us : calc_delta_mine (update_curr)
+ksoftirq-7 1d.H3 5us : __resched_task (check_preempt_wakeup)
+ksoftirq-7 1d.H3 6us : task_wake_up_rt (try_to_wake_up)
+ksoftirq-7 1d.H3 7us : _spin_unlock_irqrestore (try_to_wake_up)
+[...]
+ksoftirq-7 1d.H2 17us : irq_exit (smp_apic_timer_interrupt)
+ksoftirq-7 1d.H2 18us : sub_preempt_count (irq_exit)
+ksoftirq-7 1d.s3 19us : sub_preempt_count (irq_exit)
+ksoftirq-7 1..s2 20us : rcu_process_callbacks (__do_softirq)
+[...]
+ksoftirq-7 1..s2 26us : __rcu_process_callbacks (rcu_process_callbacks)
+ksoftirq-7 1d.s2 27us : _local_bh_enable (__do_softirq)
+ksoftirq-7 1d.s2 28us : sub_preempt_count (_local_bh_enable)
+ksoftirq-7 1.N.3 29us : sub_preempt_count (ksoftirqd)
+ksoftirq-7 1.N.2 30us : _cond_resched (ksoftirqd)
+ksoftirq-7 1.N.2 31us : __cond_resched (_cond_resched)
+ksoftirq-7 1.N.2 32us : add_preempt_count (__cond_resched)
+ksoftirq-7 1.N.2 33us : schedule (__cond_resched)
+ksoftirq-7 1.N.2 33us : add_preempt_count (schedule)
+ksoftirq-7 1.N.3 34us : hrtick_clear (schedule)
+ksoftirq-7 1dN.3 35us : _spin_lock (schedule)
+ksoftirq-7 1dN.3 36us : add_preempt_count (_spin_lock)
+ksoftirq-7 1d..4 37us : put_prev_task_fair (schedule)
+ksoftirq-7 1d..4 38us : update_curr (put_prev_task_fair)
+[...]
+ksoftirq-7 1d..5 47us : _spin_trylock (tracing_record_cmdline)
+ksoftirq-7 1d..5 48us : add_preempt_count (_spin_trylock)
+ksoftirq-7 1d..6 49us : _spin_unlock (tracing_record_cmdline)
+ksoftirq-7 1d..6 49us : sub_preempt_count (_spin_unlock)
+ksoftirq-7 1d..4 50us : schedule (__cond_resched)
+
+The interrupt went off while running ksoftirqd. This task runs
+at SCHED_OTHER. Why did not we see the 'N' set early? This may
+be a harmless bug with x86_32 and 4K stacks. On x86_32 with 4K
+stacks configured, the interrupt and softirq run with their own
+stack. Some information is held on the top of the task's stack
+(need_resched and preempt_count are both stored there). The
+setting of the NEED_RESCHED bit is done directly to the task's
+stack, but the reading of the NEED_RESCHED is done by looking at
+the current stack, which in this case is the stack for the hard
+interrupt. This hides the fact that NEED_RESCHED has been set.
+We do not see the 'N' until we switch back to the task's
+assigned stack.
+
+function
+--------
+
+This tracer is the function tracer. Enabling the function tracer
+can be done from the debug file system. Make sure the
+ftrace_enabled is set; otherwise this tracer is a nop.
+
+ # sysctl kernel.ftrace_enabled=1
+ # echo function > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: function
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4003 [00] 123.638713: finish_task_switch <-schedule
+ bash-4003 [00] 123.638714: _spin_unlock_irq <-finish_task_switch
+ bash-4003 [00] 123.638714: sub_preempt_count <-_spin_unlock_irq
+ bash-4003 [00] 123.638715: hrtick_set <-schedule
+ bash-4003 [00] 123.638715: _spin_lock_irqsave <-hrtick_set
+ bash-4003 [00] 123.638716: add_preempt_count <-_spin_lock_irqsave
+ bash-4003 [00] 123.638716: _spin_unlock_irqrestore <-hrtick_set
+ bash-4003 [00] 123.638717: sub_preempt_count <-_spin_unlock_irqrestore
+ bash-4003 [00] 123.638717: hrtick_clear <-hrtick_set
+ bash-4003 [00] 123.638718: sub_preempt_count <-schedule
+ bash-4003 [00] 123.638718: sub_preempt_count <-preempt_schedule
+ bash-4003 [00] 123.638719: wait_for_completion <-__stop_machine_run
+ bash-4003 [00] 123.638719: wait_for_common <-wait_for_completion
+ bash-4003 [00] 123.638720: _spin_lock_irq <-wait_for_common
+ bash-4003 [00] 123.638720: add_preempt_count <-_spin_lock_irq
+[...]
+
+
+Note: function tracer uses ring buffers to store the above
+entries. The newest data may overwrite the oldest data.
+Sometimes using echo to stop the trace is not sufficient because
+the tracing could have overwritten the data that you wanted to
+record. For this reason, it is sometimes better to disable
+tracing directly from a program. This allows you to stop the
+tracing at the point that you hit the part that you are
+interested in. To disable the tracing directly from a C program,
+something like following code snippet can be used:
+
+int trace_fd;
+[...]
+int main(int argc, char *argv[]) {
+ [...]
+ trace_fd = open("/debug/tracing/tracing_enabled", O_WRONLY);
+ [...]
+ if (condition_hit()) {
+ write(trace_fd, "0", 1);
+ }
+ [...]
+}
+
+Note: Here we hard coded the path name. The debugfs mount is not
+guaranteed to be at /debug (and is more commonly at
+/sys/kernel/debug). For simple one time traces, the above is
+sufficent. For anything else, a search through /proc/mounts may
+be needed to find where the debugfs file-system is mounted.
+
+
+Single thread tracing
+---------------------
+
+By writing into /debug/tracing/set_ftrace_pid you can trace a
+single thread. For example:
+
+# cat /debug/tracing/set_ftrace_pid
+no pid
+# echo 3111 > /debug/tracing/set_ftrace_pid
+# cat /debug/tracing/set_ftrace_pid
+3111
+# echo function > /debug/tracing/current_tracer
+# cat /debug/tracing/trace | head
+ # tracer: function
+ #
+ # TASK-PID CPU# TIMESTAMP FUNCTION
+ # | | | | |
+ yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return
+ yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range
+ yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel
+ yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
+ yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
+ yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
+# echo -1 > /debug/tracing/set_ftrace_pid
+# cat /debug/tracing/trace |head
+ # tracer: function
+ #
+ # TASK-PID CPU# TIMESTAMP FUNCTION
+ # | | | | |
+ ##### CPU 3 buffer started ####
+ yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait
+ yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry
+ yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry
+ yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit
+ yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit
+
+If you want to trace a function when executing, you could use
+something like this simple program:
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+int main (int argc, char **argv)
+{
+ if (argc < 1)
+ exit(-1);
+
+ if (fork() > 0) {
+ int fd, ffd;
+ char line[64];
+ int s;
+
+ ffd = open("/debug/tracing/current_tracer", O_WRONLY);
+ if (ffd < 0)
+ exit(-1);
+ write(ffd, "nop", 3);
+
+ fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
+ s = sprintf(line, "%d\n", getpid());
+ write(fd, line, s);
+
+ write(ffd, "function", 8);
+
+ close(fd);
+ close(ffd);
+
+ execvp(argv[1], argv+1);
+ }
+
+ return 0;
+}
+
+
+hw-branch-tracer (x86 only)
+---------------------------
+
+This tracer uses the x86 last branch tracing hardware feature to
+collect a branch trace on all cpus with relatively low overhead.
+
+The tracer uses a fixed-size circular buffer per cpu and only
+traces ring 0 branches. The trace file dumps that buffer in the
+following format:
+
+# tracer: hw-branch-tracer
+#
+# CPU# TO <- FROM
+ 0 scheduler_tick+0xb5/0x1bf <- task_tick_idle+0x5/0x6
+ 2 run_posix_cpu_timers+0x2b/0x72a <- run_posix_cpu_timers+0x25/0x72a
+ 0 scheduler_tick+0x139/0x1bf <- scheduler_tick+0xed/0x1bf
+ 0 scheduler_tick+0x17c/0x1bf <- scheduler_tick+0x148/0x1bf
+ 2 run_posix_cpu_timers+0x9e/0x72a <- run_posix_cpu_timers+0x5e/0x72a
+ 0 scheduler_tick+0x1b6/0x1bf <- scheduler_tick+0x1aa/0x1bf
+
+
+The tracer may be used to dump the trace for the oops'ing cpu on
+a kernel oops into the system log. To enable this,
+ftrace_dump_on_oops must be set. To set ftrace_dump_on_oops, one
+can either use the sysctl function or set it via the proc system
+interface.
+
+ sysctl kernel.ftrace_dump_on_oops=1
+
+or
+
+ echo 1 > /proc/sys/kernel/ftrace_dump_on_oops
+
+
+Here's an example of such a dump after a null pointer
+dereference in a kernel module:
+
+[57848.105921] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
+[57848.106019] IP: [<ffffffffa0000006>] open+0x6/0x14 [oops]
+[57848.106019] PGD 2354e9067 PUD 2375e7067 PMD 0
+[57848.106019] Oops: 0002 [#1] SMP
+[57848.106019] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:20:05.0/local_cpus
+[57848.106019] Dumping ftrace buffer:
+[57848.106019] ---------------------------------
+[...]
+[57848.106019] 0 chrdev_open+0xe6/0x165 <- cdev_put+0x23/0x24
+[57848.106019] 0 chrdev_open+0x117/0x165 <- chrdev_open+0xfa/0x165
+[57848.106019] 0 chrdev_open+0x120/0x165 <- chrdev_open+0x11c/0x165
+[57848.106019] 0 chrdev_open+0x134/0x165 <- chrdev_open+0x12b/0x165
+[57848.106019] 0 open+0x0/0x14 [oops] <- chrdev_open+0x144/0x165
+[57848.106019] 0 page_fault+0x0/0x30 <- open+0x6/0x14 [oops]
+[57848.106019] 0 error_entry+0x0/0x5b <- page_fault+0x4/0x30
+[57848.106019] 0 error_kernelspace+0x0/0x31 <- error_entry+0x59/0x5b
+[57848.106019] 0 error_sti+0x0/0x1 <- error_kernelspace+0x2d/0x31
+[57848.106019] 0 page_fault+0x9/0x30 <- error_sti+0x0/0x1
+[57848.106019] 0 do_page_fault+0x0/0x881 <- page_fault+0x1a/0x30
+[...]
+[57848.106019] 0 do_page_fault+0x66b/0x881 <- is_prefetch+0x1ee/0x1f2
+[57848.106019] 0 do_page_fault+0x6e0/0x881 <- do_page_fault+0x67a/0x881
+[57848.106019] 0 oops_begin+0x0/0x96 <- do_page_fault+0x6e0/0x881
+[57848.106019] 0 trace_hw_branch_oops+0x0/0x2d <- oops_begin+0x9/0x96
+[...]
+[57848.106019] 0 ds_suspend_bts+0x2a/0xe3 <- ds_suspend_bts+0x1a/0xe3
+[57848.106019] ---------------------------------
+[57848.106019] CPU 0
+[57848.106019] Modules linked in: oops
+[57848.106019] Pid: 5542, comm: cat Tainted: G W 2.6.28 #23
+[57848.106019] RIP: 0010:[<ffffffffa0000006>] [<ffffffffa0000006>] open+0x6/0x14 [oops]
+[57848.106019] RSP: 0018:ffff880235457d48 EFLAGS: 00010246
+[...]
+
+
+function graph tracer
+---------------------------
+
+This tracer is similar to the function tracer except that it
+probes a function on its entry and its exit. This is done by
+using a dynamically allocated stack of return addresses in each
+task_struct. On function entry the tracer overwrites the return
+address of each function traced to set a custom probe. Thus the
+original return address is stored on the stack of return address
+in the task_struct.
+
+Probing on both ends of a function leads to special features
+such as:
+
+- measure of a function's time execution
+- having a reliable call stack to draw function calls graph
+
+This tracer is useful in several situations:
+
+- you want to find the reason of a strange kernel behavior and
+ need to see what happens in detail on any areas (or specific
+ ones).
+
+- you are experiencing weird latencies but it's difficult to
+ find its origin.
+
+- you want to find quickly which path is taken by a specific
+ function
+
+- you just want to peek inside a working kernel and want to see
+ what happens there.
+
+# tracer: function_graph
+#
+# CPU DURATION FUNCTION CALLS
+# | | | | | | |
+
+ 0) | sys_open() {
+ 0) | do_sys_open() {
+ 0) | getname() {
+ 0) | kmem_cache_alloc() {
+ 0) 1.382 us | __might_sleep();
+ 0) 2.478 us | }
+ 0) | strncpy_from_user() {
+ 0) | might_fault() {
+ 0) 1.389 us | __might_sleep();
+ 0) 2.553 us | }
+ 0) 3.807 us | }
+ 0) 7.876 us | }
+ 0) | alloc_fd() {
+ 0) 0.668 us | _spin_lock();
+ 0) 0.570 us | expand_files();
+ 0) 0.586 us | _spin_unlock();
+
+
+There are several columns that can be dynamically
+enabled/disabled. You can use every combination of options you
+want, depending on your needs.
+
+- The cpu number on which the function executed is default
+ enabled. It is sometimes better to only trace one cpu (see
+ tracing_cpu_mask file) or you might sometimes see unordered
+ function calls while cpu tracing switch.
+
+ hide: echo nofuncgraph-cpu > /debug/tracing/trace_options
+ show: echo funcgraph-cpu > /debug/tracing/trace_options
+
+- The duration (function's time of execution) is displayed on
+ the closing bracket line of a function or on the same line
+ than the current function in case of a leaf one. It is default
+ enabled.
+
+ hide: echo nofuncgraph-duration > /debug/tracing/trace_options
+ show: echo funcgraph-duration > /debug/tracing/trace_options
+
+- The overhead field precedes the duration field in case of
+ reached duration thresholds.
+
+ hide: echo nofuncgraph-overhead > /debug/tracing/trace_options
+ show: echo funcgraph-overhead > /debug/tracing/trace_options
+ depends on: funcgraph-duration
+
+ ie:
+
+ 0) | up_write() {
+ 0) 0.646 us | _spin_lock_irqsave();
+ 0) 0.684 us | _spin_unlock_irqrestore();
+ 0) 3.123 us | }
+ 0) 0.548 us | fput();
+ 0) + 58.628 us | }
+
+ [...]
+
+ 0) | putname() {
+ 0) | kmem_cache_free() {
+ 0) 0.518 us | __phys_addr();
+ 0) 1.757 us | }
+ 0) 2.861 us | }
+ 0) ! 115.305 us | }
+ 0) ! 116.402 us | }
+
+ + means that the function exceeded 10 usecs.
+ ! means that the function exceeded 100 usecs.
+
+
+- The task/pid field displays the thread cmdline and pid which
+ executed the function. It is default disabled.
+
+ hide: echo nofuncgraph-proc > /debug/tracing/trace_options
+ show: echo funcgraph-proc > /debug/tracing/trace_options
+
+ ie:
+
+ # tracer: function_graph
+ #
+ # CPU TASK/PID DURATION FUNCTION CALLS
+ # | | | | | | | | |
+ 0) sh-4802 | | d_free() {
+ 0) sh-4802 | | call_rcu() {
+ 0) sh-4802 | | __call_rcu() {
+ 0) sh-4802 | 0.616 us | rcu_process_gp_end();
+ 0) sh-4802 | 0.586 us | check_for_new_grace_period();
+ 0) sh-4802 | 2.899 us | }
+ 0) sh-4802 | 4.040 us | }
+ 0) sh-4802 | 5.151 us | }
+ 0) sh-4802 | + 49.370 us | }
+
+
+- The absolute time field is an absolute timestamp given by the
+ system clock since it started. A snapshot of this time is
+ given on each entry/exit of functions
+
+ hide: echo nofuncgraph-abstime > /debug/tracing/trace_options
+ show: echo funcgraph-abstime > /debug/tracing/trace_options
+
+ ie:
+
+ #
+ # TIME CPU DURATION FUNCTION CALLS
+ # | | | | | | | |
+ 360.774522 | 1) 0.541 us | }
+ 360.774522 | 1) 4.663 us | }
+ 360.774523 | 1) 0.541 us | __wake_up_bit();
+ 360.774524 | 1) 6.796 us | }
+ 360.774524 | 1) 7.952 us | }
+ 360.774525 | 1) 9.063 us | }
+ 360.774525 | 1) 0.615 us | journal_mark_dirty();
+ 360.774527 | 1) 0.578 us | __brelse();
+ 360.774528 | 1) | reiserfs_prepare_for_journal() {
+ 360.774528 | 1) | unlock_buffer() {
+ 360.774529 | 1) | wake_up_bit() {
+ 360.774529 | 1) | bit_waitqueue() {
+ 360.774530 | 1) 0.594 us | __phys_addr();
+
+
+You can put some comments on specific functions by using
+trace_printk() For example, if you want to put a comment inside
+the __might_sleep() function, you just have to include
+<linux/ftrace.h> and call trace_printk() inside __might_sleep()
+
+trace_printk("I'm a comment!\n")
+
+will produce:
+
+ 1) | __might_sleep() {
+ 1) | /* I'm a comment! */
+ 1) 1.449 us | }
+
+
+You might find other useful features for this tracer in the
+following "dynamic ftrace" section such as tracing only specific
+functions or tasks.
+
+dynamic ftrace
+--------------
+
+If CONFIG_DYNAMIC_FTRACE is set, the system will run with
+virtually no overhead when function tracing is disabled. The way
+this works is the mcount function call (placed at the start of
+every kernel function, produced by the -pg switch in gcc),
+starts of pointing to a simple return. (Enabling FTRACE will
+include the -pg switch in the compiling of the kernel.)
+
+At compile time every C file object is run through the
+recordmcount.pl script (located in the scripts directory). This
+script will process the C object using objdump to find all the
+locations in the .text section that call mcount. (Note, only the
+.text section is processed, since processing other sections like
+.init.text may cause races due to those sections being freed).
+
+A new section called "__mcount_loc" is created that holds
+references to all the mcount call sites in the .text section.
+This section is compiled back into the original object. The
+final linker will add all these references into a single table.
+
+On boot up, before SMP is initialized, the dynamic ftrace code
+scans this table and updates all the locations into nops. It
+also records the locations, which are added to the
+available_filter_functions list. Modules are processed as they
+are loaded and before they are executed. When a module is
+unloaded, it also removes its functions from the ftrace function
+list. This is automatic in the module unload code, and the
+module author does not need to worry about it.
+
+When tracing is enabled, kstop_machine is called to prevent
+races with the CPUS executing code being modified (which can
+cause the CPU to do undesireable things), and the nops are
+patched back to calls. But this time, they do not call mcount
+(which is just a function stub). They now call into the ftrace
+infrastructure.
+
+One special side-effect to the recording of the functions being
+traced is that we can now selectively choose which functions we
+wish to trace and which ones we want the mcount calls to remain
+as nops.
+
+Two files are used, one for enabling and one for disabling the
+tracing of specified functions. They are:
+
+ set_ftrace_filter
+
+and
+
+ set_ftrace_notrace
+
+A list of available functions that you can add to these files is
+listed in:
+
+ available_filter_functions
+
+ # cat /debug/tracing/available_filter_functions
+put_prev_task_idle
+kmem_cache_create
+pick_next_task_rt
+get_online_cpus
+pick_next_task_fair
+mutex_lock
+[...]
+
+If I am only interested in sys_nanosleep and hrtimer_interrupt:
+
+ # echo sys_nanosleep hrtimer_interrupt \
+ > /debug/tracing/set_ftrace_filter
+ # echo ftrace > /debug/tracing/current_tracer
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ usleep-4134 [00] 1317.070017: hrtimer_interrupt <-smp_apic_timer_interrupt
+ usleep-4134 [00] 1317.070111: sys_nanosleep <-syscall_call
+ <idle>-0 [00] 1317.070115: hrtimer_interrupt <-smp_apic_timer_interrupt
+
+To see which functions are being traced, you can cat the file:
+
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_interrupt
+sys_nanosleep
+
+
+Perhaps this is not enough. The filters also allow simple wild
+cards. Only the following are currently available
+
+ <match>* - will match functions that begin with <match>
+ *<match> - will match functions that end with <match>
+ *<match>* - will match functions that have <match> in it
+
+These are the only wild cards which are supported.
+
+ <match>*<match> will not work.
+
+Note: It is better to use quotes to enclose the wild cards,
+ otherwise the shell may expand the parameters into names
+ of files in the local directory.
+
+ # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
+
+Produces:
+
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4003 [00] 1480.611794: hrtimer_init <-copy_process
+ bash-4003 [00] 1480.611941: hrtimer_start <-hrtick_set
+ bash-4003 [00] 1480.611956: hrtimer_cancel <-hrtick_clear
+ bash-4003 [00] 1480.611956: hrtimer_try_to_cancel <-hrtimer_cancel
+ <idle>-0 [00] 1480.612019: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612025: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612032: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612037: hrtimer_get_next_event <-get_next_timer_interrupt
+ <idle>-0 [00] 1480.612382: hrtimer_get_next_event <-get_next_timer_interrupt
+
+
+Notice that we lost the sys_nanosleep.
+
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_run_queues
+hrtimer_run_pending
+hrtimer_init
+hrtimer_cancel
+hrtimer_try_to_cancel
+hrtimer_forward
+hrtimer_start
+hrtimer_reprogram
+hrtimer_force_reprogram
+hrtimer_get_next_event
+hrtimer_interrupt
+hrtimer_nanosleep
+hrtimer_wakeup
+hrtimer_get_remaining
+hrtimer_get_res
+hrtimer_init_sleeper
+
+
+This is because the '>' and '>>' act just like they do in bash.
+To rewrite the filters, use '>'
+To append to the filters, use '>>'
+
+To clear out a filter so that all functions will be recorded
+again:
+
+ # echo > /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+ #
+
+Again, now we want to append.
+
+ # echo sys_nanosleep > /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+sys_nanosleep
+ # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
+ # cat /debug/tracing/set_ftrace_filter
+hrtimer_run_queues
+hrtimer_run_pending
+hrtimer_init
+hrtimer_cancel
+hrtimer_try_to_cancel
+hrtimer_forward
+hrtimer_start
+hrtimer_reprogram
+hrtimer_force_reprogram
+hrtimer_get_next_event
+hrtimer_interrupt
+sys_nanosleep
+hrtimer_nanosleep
+hrtimer_wakeup
+hrtimer_get_remaining
+hrtimer_get_res
+hrtimer_init_sleeper
+
+
+The set_ftrace_notrace prevents those functions from being
+traced.
+
+ # echo '*preempt*' '*lock*' > /debug/tracing/set_ftrace_notrace
+
+Produces:
+
+# tracer: ftrace
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+ bash-4043 [01] 115.281644: finish_task_switch <-schedule
+ bash-4043 [01] 115.281645: hrtick_set <-schedule
+ bash-4043 [01] 115.281645: hrtick_clear <-hrtick_set
+ bash-4043 [01] 115.281646: wait_for_completion <-__stop_machine_run
+ bash-4043 [01] 115.281647: wait_for_common <-wait_for_completion
+ bash-4043 [01] 115.281647: kthread_stop <-stop_machine_run
+ bash-4043 [01] 115.281648: init_waitqueue_head <-kthread_stop
+ bash-4043 [01] 115.281648: wake_up_process <-kthread_stop
+ bash-4043 [01] 115.281649: try_to_wake_up <-wake_up_process
+
+We can see that there's no more lock or preempt tracing.
+
+
+Dynamic ftrace with the function graph tracer
+---------------------------------------------
+
+Although what has been explained above concerns both the
+function tracer and the function-graph-tracer, there are some
+special features only available in the function-graph tracer.
+
+If you want to trace only one function and all of its children,
+you just have to echo its name into set_graph_function:
+
+ echo __do_fault > set_graph_function
+
+will produce the following "expanded" trace of the __do_fault()
+function:
+
+ 0) | __do_fault() {
+ 0) | filemap_fault() {
+ 0) | find_lock_page() {
+ 0) 0.804 us | find_get_page();
+ 0) | __might_sleep() {
+ 0) 1.329 us | }
+ 0) 3.904 us | }
+ 0) 4.979 us | }
+ 0) 0.653 us | _spin_lock();
+ 0) 0.578 us | page_add_file_rmap();
+ 0) 0.525 us | native_set_pte_at();
+ 0) 0.585 us | _spin_unlock();
+ 0) | unlock_page() {
+ 0) 0.541 us | page_waitqueue();
+ 0) 0.639 us | __wake_up_bit();
+ 0) 2.786 us | }
+ 0) + 14.237 us | }
+ 0) | __do_fault() {
+ 0) | filemap_fault() {
+ 0) | find_lock_page() {
+ 0) 0.698 us | find_get_page();
+ 0) | __might_sleep() {
+ 0) 1.412 us | }
+ 0) 3.950 us | }
+ 0) 5.098 us | }
+ 0) 0.631 us | _spin_lock();
+ 0) 0.571 us | page_add_file_rmap();
+ 0) 0.526 us | native_set_pte_at();
+ 0) 0.586 us | _spin_unlock();
+ 0) | unlock_page() {
+ 0) 0.533 us | page_waitqueue();
+ 0) 0.638 us | __wake_up_bit();
+ 0) 2.793 us | }
+ 0) + 14.012 us | }
+
+You can also expand several functions at once:
+
+ echo sys_open > set_graph_function
+ echo sys_close >> set_graph_function
+
+Now if you want to go back to trace all functions you can clear
+this special filter via:
+
+ echo > set_graph_function
+
+
+trace_pipe
+----------
+
+The trace_pipe outputs the same content as the trace file, but
+the effect on the tracing is different. Every read from
+trace_pipe is consumed. This means that subsequent reads will be
+different. The trace is live.
+
+ # echo function > /debug/tracing/current_tracer
+ # cat /debug/tracing/trace_pipe > /tmp/trace.out &
+[1] 4153
+ # echo 1 > /debug/tracing/tracing_enabled
+ # usleep 1
+ # echo 0 > /debug/tracing/tracing_enabled
+ # cat /debug/tracing/trace
+# tracer: function
+#
+# TASK-PID CPU# TIMESTAMP FUNCTION
+# | | | | |
+
+ #
+ # cat /tmp/trace.out
+ bash-4043 [00] 41.267106: finish_task_switch <-schedule
+ bash-4043 [00] 41.267106: hrtick_set <-schedule
+ bash-4043 [00] 41.267107: hrtick_clear <-hrtick_set
+ bash-4043 [00] 41.267108: wait_for_completion <-__stop_machine_run
+ bash-4043 [00] 41.267108: wait_for_common <-wait_for_completion
+ bash-4043 [00] 41.267109: kthread_stop <-stop_machine_run
+ bash-4043 [00] 41.267109: init_waitqueue_head <-kthread_stop
+ bash-4043 [00] 41.267110: wake_up_process <-kthread_stop
+ bash-4043 [00] 41.267110: try_to_wake_up <-wake_up_process
+ bash-4043 [00] 41.267111: select_task_rq_rt <-try_to_wake_up
+
+
+Note, reading the trace_pipe file will block until more input is
+added. By changing the tracer, trace_pipe will issue an EOF. We
+needed to set the function tracer _before_ we "cat" the
+trace_pipe file.
+
+
+trace entries
+-------------
+
+Having too much or not enough data can be troublesome in
+diagnosing an issue in the kernel. The file buffer_size_kb is
+used to modify the size of the internal trace buffers. The
+number listed is the number of entries that can be recorded per
+CPU. To know the full size, multiply the number of possible CPUS
+with the number of entries.
+
+ # cat /debug/tracing/buffer_size_kb
+1408 (units kilobytes)
+
+Note, to modify this, you must have tracing completely disabled.
+To do that, echo "nop" into the current_tracer. If the
+current_tracer is not set to "nop", an EINVAL error will be
+returned.
+
+ # echo nop > /debug/tracing/current_tracer
+ # echo 10000 > /debug/tracing/buffer_size_kb
+ # cat /debug/tracing/buffer_size_kb
+10000 (units kilobytes)
+
+The number of pages which will be allocated is limited to a
+percentage of available memory. Allocating too much will produce
+an error.
+
+ # echo 1000000000000 > /debug/tracing/buffer_size_kb
+-bash: echo: write error: Cannot allocate memory
+ # cat /debug/tracing/buffer_size_kb
+85
+
+-----------
+
+More details can be found in the source code, in the
+kernel/tracing/*.c files.
--- /dev/null
+ kmemtrace - Kernel Memory Tracer
+
+ by Eduard - Gabriel Munteanu
+ <eduard.munteanu@linux360.ro>
+
+I. Introduction
+===============
+
+kmemtrace helps kernel developers figure out two things:
+1) how different allocators (SLAB, SLUB etc.) perform
+2) how kernel code allocates memory and how much
+
+To do this, we trace every allocation and export information to the userspace
+through the relay interface. We export things such as the number of requested
+bytes, the number of bytes actually allocated (i.e. including internal
+fragmentation), whether this is a slab allocation or a plain kmalloc() and so
+on.
+
+The actual analysis is performed by a userspace tool (see section III for
+details on where to get it from). It logs the data exported by the kernel,
+processes it and (as of writing this) can provide the following information:
+- the total amount of memory allocated and fragmentation per call-site
+- the amount of memory allocated and fragmentation per allocation
+- total memory allocated and fragmentation in the collected dataset
+- number of cross-CPU allocation and frees (makes sense in NUMA environments)
+
+Moreover, it can potentially find inconsistent and erroneous behavior in
+kernel code, such as using slab free functions on kmalloc'ed memory or
+allocating less memory than requested (but not truly failed allocations).
+
+kmemtrace also makes provisions for tracing on some arch and analysing the
+data on another.
+
+II. Design and goals
+====================
+
+kmemtrace was designed to handle rather large amounts of data. Thus, it uses
+the relay interface to export whatever is logged to userspace, which then
+stores it. Analysis and reporting is done asynchronously, that is, after the
+data is collected and stored. By design, it allows one to log and analyse
+on different machines and different arches.
+
+As of writing this, the ABI is not considered stable, though it might not
+change much. However, no guarantees are made about compatibility yet. When
+deemed stable, the ABI should still allow easy extension while maintaining
+backward compatibility. This is described further in Documentation/ABI.
+
+Summary of design goals:
+ - allow logging and analysis to be done across different machines
+ - be fast and anticipate usage in high-load environments (*)
+ - be reasonably extensible
+ - make it possible for GNU/Linux distributions to have kmemtrace
+ included in their repositories
+
+(*) - one of the reasons Pekka Enberg's original userspace data analysis
+ tool's code was rewritten from Perl to C (although this is more than a
+ simple conversion)
+
+
+III. Quick usage guide
+======================
+
+1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable
+CONFIG_KMEMTRACE).
+
+2) Get the userspace tool and build it:
+$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository
+$ cd kmemtrace-user/
+$ ./autogen.sh
+$ ./configure
+$ make
+
+3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the
+'single' runlevel (so that relay buffers don't fill up easily), and run
+kmemtrace:
+# '$' does not mean user, but root here.
+$ mount -t debugfs none /sys/kernel/debug
+$ mount -t proc none /proc
+$ cd path/to/kmemtrace-user/
+$ ./kmemtraced
+Wait a bit, then stop it with CTRL+C.
+$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't
+ # overrun, should
+ # be zero.
+$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to
+ check its correctness]
+$ ./kmemtrace-report
+
+Now you should have a nice and short summary of how the allocator performs.
+
+IV. FAQ and known issues
+========================
+
+Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix
+this? Should I worry?
+A: If it's non-zero, this affects kmemtrace's accuracy, depending on how
+large the number is. You can fix it by supplying a higher
+'kmemtrace.subbufs=N' kernel parameter.
+---
+
+Q: kmemtrace_check reports errors, how do I fix this? Should I worry?
+A: This is a bug and should be reported. It can occur for a variety of
+reasons:
+ - possible bugs in relay code
+ - possible misuse of relay by kmemtrace
+ - timestamps being collected unorderly
+Or you may fix it yourself and send us a patch.
+---
+
+Q: kmemtrace_report shows many errors, how do I fix this? Should I worry?
+A: This is a known issue and I'm working on it. These might be true errors
+in kernel code, which may have inconsistent behavior (e.g. allocating memory
+with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed
+out this behavior may work with SLAB, but may fail with other allocators.
+
+It may also be due to lack of tracing in some unusual allocator functions.
+
+We don't want bug reports regarding this issue yet.
+---
+
+V. See also
+===========
+
+Documentation/kernel-parameters.txt
+Documentation/ABI/testing/debugfs-kmemtrace
+
--- /dev/null
+ In-kernel memory-mapped I/O tracing
+
+
+Home page and links to optional user space tools:
+
+ http://nouveau.freedesktop.org/wiki/MmioTrace
+
+MMIO tracing was originally developed by Intel around 2003 for their Fault
+Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel,
+Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau
+project in mind. Since then many people have contributed.
+
+Mmiotrace was built for reverse engineering any memory-mapped IO device with
+the Nouveau project as the first real user. Only x86 and x86_64 architectures
+are supported.
+
+Out-of-tree mmiotrace was originally modified for mainline inclusion and
+ftrace framework by Pekka Paalanen <pq@iki.fi>.
+
+
+Preparation
+-----------
+
+Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is
+disabled by default, so it is safe to have this set to yes. SMP systems are
+supported, but tracing is unreliable and may miss events if more than one CPU
+is on-line, therefore mmiotrace takes all but one CPU off-line during run-time
+activation. You can re-enable CPUs by hand, but you have been warned, there
+is no way to automatically detect if you are losing events due to CPUs racing.
+
+
+Usage Quick Reference
+---------------------
+
+$ mount -t debugfs debugfs /debug
+$ echo mmiotrace > /debug/tracing/current_tracer
+$ cat /debug/tracing/trace_pipe > mydump.txt &
+Start X or whatever.
+$ echo "X is up" > /debug/tracing/trace_marker
+$ echo nop > /debug/tracing/current_tracer
+Check for lost events.
+
+
+Usage
+-----
+
+Make sure debugfs is mounted to /debug. If not, (requires root privileges)
+$ mount -t debugfs debugfs /debug
+
+Check that the driver you are about to trace is not loaded.
+
+Activate mmiotrace (requires root privileges):
+$ echo mmiotrace > /debug/tracing/current_tracer
+
+Start storing the trace:
+$ cat /debug/tracing/trace_pipe > mydump.txt &
+The 'cat' process should stay running (sleeping) in the background.
+
+Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
+accesses to areas that are ioremapped while mmiotrace is active.
+
+During tracing you can place comments (markers) into the trace by
+$ echo "X is up" > /debug/tracing/trace_marker
+This makes it easier to see which part of the (huge) trace corresponds to
+which action. It is recommended to place descriptive markers about what you
+do.
+
+Shut down mmiotrace (requires root privileges):
+$ echo nop > /debug/tracing/current_tracer
+The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
+pressing ctrl+c.
+
+Check that mmiotrace did not lose events due to a buffer filling up. Either
+$ grep -i lost mydump.txt
+which tells you exactly how many events were lost, or use
+$ dmesg
+to view your kernel log and look for "mmiotrace has lost events" warning. If
+events were lost, the trace is incomplete. You should enlarge the buffers and
+try again. Buffers are enlarged by first seeing how large the current buffers
+are:
+$ cat /debug/tracing/buffer_size_kb
+gives you a number. Approximately double this number and write it back, for
+instance:
+$ echo 128000 > /debug/tracing/buffer_size_kb
+Then start again from the top.
+
+If you are doing a trace for a driver project, e.g. Nouveau, you should also
+do the following before sending your results:
+$ lspci -vvv > lspci.txt
+$ dmesg > dmesg.txt
+$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt
+and then send the .tar.gz file. The trace compresses considerably. Replace
+"pciid" and "nick" with the PCI ID or model name of your piece of hardware
+under investigation and your nick name.
+
+
+How Mmiotrace Works
+-------------------
+
+Access to hardware IO-memory is gained by mapping addresses from PCI bus by
+calling one of the ioremap_*() functions. Mmiotrace is hooked into the
+__ioremap() function and gets called whenever a mapping is created. Mapping is
+an event that is recorded into the trace log. Note, that ISA range mappings
+are not caught, since the mapping always exists and is returned directly.
+
+MMIO accesses are recorded via page faults. Just before __ioremap() returns,
+the mapped pages are marked as not present. Any access to the pages causes a
+fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace
+marks the page present, sets TF flag to achieve single stepping and exits the
+fault handler. The instruction that faulted is executed and debug trap is
+entered. Here mmiotrace again marks the page as not present. The instruction
+is decoded to get the type of operation (read/write), data width and the value
+read or written. These are stored to the trace log.
+
+Setting the page present in the page fault handler has a race condition on SMP
+machines. During the single stepping other CPUs may run freely on that page
+and events can be missed without a notice. Re-enabling other CPUs during
+tracing is discouraged.
+
+
+Trace Log Format
+----------------
+
+The raw log is text and easily filtered with e.g. grep and awk. One record is
+one line in the log. A record starts with a keyword, followed by keyword
+dependant arguments. Arguments are separated by a space, or continue until the
+end of line. The format for version 20070824 is as follows:
+
+Explanation Keyword Space separated arguments
+---------------------------------------------------------------------------
+
+read event R width, timestamp, map id, physical, value, PC, PID
+write event W width, timestamp, map id, physical, value, PC, PID
+ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID
+iounmap event UNMAP timestamp, map id, PC, PID
+marker MARK timestamp, text
+version VERSION the string "20070824"
+info for reader LSPCI one line from lspci -v
+PCI address map PCIDEV space separated /proc/bus/pci/devices data
+unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID
+
+Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual
+is a kernel virtual address. Width is the data width in bytes and value is the
+data value. Map id is an arbitrary id number identifying the mapping that was
+used in an operation. PC is the program counter and PID is process id. PC is
+zero if it is not recorded. PID is always zero as tracing MMIO accesses
+originating in user space memory is not yet supported.
+
+For instance, the following awk filter will pass all 32-bit writes that target
+physical addresses in the range [0xfb73ce40, 0xfb800000[
+
+$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 &&
+adr < 0xfb800000) print; }'
+
+
+Tools for Developers
+--------------------
+
+The user space tools include utilities for:
+- replacing numeric addresses and values with hardware register names
+- replaying MMIO logs, i.e., re-executing the recorded writes
+
+
--- /dev/null
+ Using the Linux Kernel Tracepoints
+
+ Mathieu Desnoyers
+
+
+This document introduces Linux Kernel Tracepoints and their use. It
+provides examples of how to insert tracepoints in the kernel and
+connect probe functions to them and provides some examples of probe
+functions.
+
+
+* Purpose of tracepoints
+
+A tracepoint placed in code provides a hook to call a function (probe)
+that you can provide at runtime. A tracepoint can be "on" (a probe is
+connected to it) or "off" (no probe is attached). When a tracepoint is
+"off" it has no effect, except for adding a tiny time penalty
+(checking a condition for a branch) and space penalty (adding a few
+bytes for the function call at the end of the instrumented function
+and adds a data structure in a separate section). When a tracepoint
+is "on", the function you provide is called each time the tracepoint
+is executed, in the execution context of the caller. When the function
+provided ends its execution, it returns to the caller (continuing from
+the tracepoint site).
+
+You can put tracepoints at important locations in the code. They are
+lightweight hooks that can pass an arbitrary number of parameters,
+which prototypes are described in a tracepoint declaration placed in a
+header file.
+
+They can be used for tracing and performance accounting.
+
+
+* Usage
+
+Two elements are required for tracepoints :
+
+- A tracepoint definition, placed in a header file.
+- The tracepoint statement, in C code.
+
+In order to use tracepoints, you should include linux/tracepoint.h.
+
+In include/trace/subsys.h :
+
+#include <linux/tracepoint.h>
+
+DECLARE_TRACE(subsys_eventname,
+ TP_PROTO(int firstarg, struct task_struct *p),
+ TP_ARGS(firstarg, p));
+
+In subsys/file.c (where the tracing statement must be added) :
+
+#include <trace/subsys.h>
+
+DEFINE_TRACE(subsys_eventname);
+
+void somefct(void)
+{
+ ...
+ trace_subsys_eventname(arg, task);
+ ...
+}
+
+Where :
+- subsys_eventname is an identifier unique to your event
+ - subsys is the name of your subsystem.
+ - eventname is the name of the event to trace.
+
+- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the
+ function called by this tracepoint.
+
+- TP_ARGS(firstarg, p) are the parameters names, same as found in the
+ prototype.
+
+Connecting a function (probe) to a tracepoint is done by providing a
+probe (function to call) for the specific tracepoint through
+register_trace_subsys_eventname(). Removing a probe is done through
+unregister_trace_subsys_eventname(); it will remove the probe.
+
+tracepoint_synchronize_unregister() must be called before the end of
+the module exit function to make sure there is no caller left using
+the probe. This, and the fact that preemption is disabled around the
+probe call, make sure that probe removal and module unload are safe.
+See the "Probe example" section below for a sample probe module.
+
+The tracepoint mechanism supports inserting multiple instances of the
+same tracepoint, but a single definition must be made of a given
+tracepoint name over all the kernel to make sure no type conflict will
+occur. Name mangling of the tracepoints is done using the prototypes
+to make sure typing is correct. Verification of probe type correctness
+is done at the registration site by the compiler. Tracepoints can be
+put in inline functions, inlined static functions, and unrolled loops
+as well as regular functions.
+
+The naming scheme "subsys_event" is suggested here as a convention
+intended to limit collisions. Tracepoint names are global to the
+kernel: they are considered as being the same whether they are in the
+core kernel image or in modules.
+
+If the tracepoint has to be used in kernel modules, an
+EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be
+used to export the defined tracepoints.
+
+* Probe / tracepoint example
+
+See the example provided in samples/tracepoints
+
+Compile them with your kernel. They are built during 'make' (not
+'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m.
+
+Run, as root :
+modprobe tracepoint-sample (insmod order is not important)
+modprobe tracepoint-probe-sample
+cat /proc/tracepoint-sample (returns an expected error)
+rmmod tracepoint-sample tracepoint-probe-sample
+dmesg
+++ /dev/null
- Using the Linux Kernel Tracepoints
-
- Mathieu Desnoyers
-
-
-This document introduces Linux Kernel Tracepoints and their use. It
-provides examples of how to insert tracepoints in the kernel and
-connect probe functions to them and provides some examples of probe
-functions.
-
-
-* Purpose of tracepoints
-
-A tracepoint placed in code provides a hook to call a function (probe)
-that you can provide at runtime. A tracepoint can be "on" (a probe is
-connected to it) or "off" (no probe is attached). When a tracepoint is
-"off" it has no effect, except for adding a tiny time penalty
-(checking a condition for a branch) and space penalty (adding a few
-bytes for the function call at the end of the instrumented function
-and adds a data structure in a separate section). When a tracepoint
-is "on", the function you provide is called each time the tracepoint
-is executed, in the execution context of the caller. When the function
-provided ends its execution, it returns to the caller (continuing from
-the tracepoint site).
-
-You can put tracepoints at important locations in the code. They are
-lightweight hooks that can pass an arbitrary number of parameters,
-which prototypes are described in a tracepoint declaration placed in a
-header file.
-
-They can be used for tracing and performance accounting.
-
-
-* Usage
-
-Two elements are required for tracepoints :
-
-- A tracepoint definition, placed in a header file.
-- The tracepoint statement, in C code.
-
-In order to use tracepoints, you should include linux/tracepoint.h.
-
-In include/trace/subsys.h :
-
-#include <linux/tracepoint.h>
-
-DECLARE_TRACE(subsys_eventname,
- TP_PROTO(int firstarg, struct task_struct *p),
- TP_ARGS(firstarg, p));
-
-In subsys/file.c (where the tracing statement must be added) :
-
-#include <trace/subsys.h>
-
-DEFINE_TRACE(subsys_eventname);
-
-void somefct(void)
-{
- ...
- trace_subsys_eventname(arg, task);
- ...
-}
-
-Where :
-- subsys_eventname is an identifier unique to your event
- - subsys is the name of your subsystem.
- - eventname is the name of the event to trace.
-
-- TP_PROTO(int firstarg, struct task_struct *p) is the prototype of the
- function called by this tracepoint.
-
-- TP_ARGS(firstarg, p) are the parameters names, same as found in the
- prototype.
-
-Connecting a function (probe) to a tracepoint is done by providing a
-probe (function to call) for the specific tracepoint through
-register_trace_subsys_eventname(). Removing a probe is done through
-unregister_trace_subsys_eventname(); it will remove the probe.
-
-tracepoint_synchronize_unregister() must be called before the end of
-the module exit function to make sure there is no caller left using
-the probe. This, and the fact that preemption is disabled around the
-probe call, make sure that probe removal and module unload are safe.
-See the "Probe example" section below for a sample probe module.
-
-The tracepoint mechanism supports inserting multiple instances of the
-same tracepoint, but a single definition must be made of a given
-tracepoint name over all the kernel to make sure no type conflict will
-occur. Name mangling of the tracepoints is done using the prototypes
-to make sure typing is correct. Verification of probe type correctness
-is done at the registration site by the compiler. Tracepoints can be
-put in inline functions, inlined static functions, and unrolled loops
-as well as regular functions.
-
-The naming scheme "subsys_event" is suggested here as a convention
-intended to limit collisions. Tracepoint names are global to the
-kernel: they are considered as being the same whether they are in the
-core kernel image or in modules.
-
-If the tracepoint has to be used in kernel modules, an
-EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be
-used to export the defined tracepoints.
-
-* Probe / tracepoint example
-
-See the example provided in samples/tracepoints
-
-Compile them with your kernel. They are built during 'make' (not
-'make modules') when CONFIG_SAMPLE_TRACEPOINTS=m.
-
-Run, as root :
-modprobe tracepoint-sample (insmod order is not important)
-modprobe tracepoint-probe-sample
-cat /proc/tracepoint-sample (returns an expected error)
-rmmod tracepoint-sample tracepoint-probe-sample
-dmesg
+++ /dev/null
- In-kernel memory-mapped I/O tracing
-
-
-Home page and links to optional user space tools:
-
- http://nouveau.freedesktop.org/wiki/MmioTrace
-
-MMIO tracing was originally developed by Intel around 2003 for their Fault
-Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel,
-Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau
-project in mind. Since then many people have contributed.
-
-Mmiotrace was built for reverse engineering any memory-mapped IO device with
-the Nouveau project as the first real user. Only x86 and x86_64 architectures
-are supported.
-
-Out-of-tree mmiotrace was originally modified for mainline inclusion and
-ftrace framework by Pekka Paalanen <pq@iki.fi>.
-
-
-Preparation
------------
-
-Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is
-disabled by default, so it is safe to have this set to yes. SMP systems are
-supported, but tracing is unreliable and may miss events if more than one CPU
-is on-line, therefore mmiotrace takes all but one CPU off-line during run-time
-activation. You can re-enable CPUs by hand, but you have been warned, there
-is no way to automatically detect if you are losing events due to CPUs racing.
-
-
-Usage Quick Reference
----------------------
-
-$ mount -t debugfs debugfs /debug
-$ echo mmiotrace > /debug/tracing/current_tracer
-$ cat /debug/tracing/trace_pipe > mydump.txt &
-Start X or whatever.
-$ echo "X is up" > /debug/tracing/trace_marker
-$ echo nop > /debug/tracing/current_tracer
-Check for lost events.
-
-
-Usage
------
-
-Make sure debugfs is mounted to /debug. If not, (requires root privileges)
-$ mount -t debugfs debugfs /debug
-
-Check that the driver you are about to trace is not loaded.
-
-Activate mmiotrace (requires root privileges):
-$ echo mmiotrace > /debug/tracing/current_tracer
-
-Start storing the trace:
-$ cat /debug/tracing/trace_pipe > mydump.txt &
-The 'cat' process should stay running (sleeping) in the background.
-
-Load the driver you want to trace and use it. Mmiotrace will only catch MMIO
-accesses to areas that are ioremapped while mmiotrace is active.
-
-During tracing you can place comments (markers) into the trace by
-$ echo "X is up" > /debug/tracing/trace_marker
-This makes it easier to see which part of the (huge) trace corresponds to
-which action. It is recommended to place descriptive markers about what you
-do.
-
-Shut down mmiotrace (requires root privileges):
-$ echo nop > /debug/tracing/current_tracer
-The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
-pressing ctrl+c.
-
-Check that mmiotrace did not lose events due to a buffer filling up. Either
-$ grep -i lost mydump.txt
-which tells you exactly how many events were lost, or use
-$ dmesg
-to view your kernel log and look for "mmiotrace has lost events" warning. If
-events were lost, the trace is incomplete. You should enlarge the buffers and
-try again. Buffers are enlarged by first seeing how large the current buffers
-are:
-$ cat /debug/tracing/buffer_size_kb
-gives you a number. Approximately double this number and write it back, for
-instance:
-$ echo 128000 > /debug/tracing/buffer_size_kb
-Then start again from the top.
-
-If you are doing a trace for a driver project, e.g. Nouveau, you should also
-do the following before sending your results:
-$ lspci -vvv > lspci.txt
-$ dmesg > dmesg.txt
-$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt
-and then send the .tar.gz file. The trace compresses considerably. Replace
-"pciid" and "nick" with the PCI ID or model name of your piece of hardware
-under investigation and your nick name.
-
-
-How Mmiotrace Works
--------------------
-
-Access to hardware IO-memory is gained by mapping addresses from PCI bus by
-calling one of the ioremap_*() functions. Mmiotrace is hooked into the
-__ioremap() function and gets called whenever a mapping is created. Mapping is
-an event that is recorded into the trace log. Note, that ISA range mappings
-are not caught, since the mapping always exists and is returned directly.
-
-MMIO accesses are recorded via page faults. Just before __ioremap() returns,
-the mapped pages are marked as not present. Any access to the pages causes a
-fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace
-marks the page present, sets TF flag to achieve single stepping and exits the
-fault handler. The instruction that faulted is executed and debug trap is
-entered. Here mmiotrace again marks the page as not present. The instruction
-is decoded to get the type of operation (read/write), data width and the value
-read or written. These are stored to the trace log.
-
-Setting the page present in the page fault handler has a race condition on SMP
-machines. During the single stepping other CPUs may run freely on that page
-and events can be missed without a notice. Re-enabling other CPUs during
-tracing is discouraged.
-
-
-Trace Log Format
-----------------
-
-The raw log is text and easily filtered with e.g. grep and awk. One record is
-one line in the log. A record starts with a keyword, followed by keyword
-dependant arguments. Arguments are separated by a space, or continue until the
-end of line. The format for version 20070824 is as follows:
-
-Explanation Keyword Space separated arguments
----------------------------------------------------------------------------
-
-read event R width, timestamp, map id, physical, value, PC, PID
-write event W width, timestamp, map id, physical, value, PC, PID
-ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID
-iounmap event UNMAP timestamp, map id, PC, PID
-marker MARK timestamp, text
-version VERSION the string "20070824"
-info for reader LSPCI one line from lspci -v
-PCI address map PCIDEV space separated /proc/bus/pci/devices data
-unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID
-
-Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual
-is a kernel virtual address. Width is the data width in bytes and value is the
-data value. Map id is an arbitrary id number identifying the mapping that was
-used in an operation. PC is the program counter and PID is process id. PC is
-zero if it is not recorded. PID is always zero as tracing MMIO accesses
-originating in user space memory is not yet supported.
-
-For instance, the following awk filter will pass all 32-bit writes that target
-physical addresses in the range [0xfb73ce40, 0xfb800000[
-
-$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 &&
-adr < 0xfb800000) print; }'
-
-
-Tools for Developers
---------------------
-
-The user space tools include utilities for:
-- replacing numeric addresses and values with hardware register names
-- replaying MMIO logs, i.e., re-executing the recorded writes
-
-
00-INDEX
- this file.
+active_mm.txt
+ - An explanation from Linus about tsk->active_mm vs tsk->mm.
balance
- various information on memory balancing.
hugetlbpage.txt
--- /dev/null
+List: linux-kernel
+Subject: Re: active_mm
+From: Linus Torvalds <torvalds () transmeta ! com>
+Date: 1999-07-30 21:36:24
+
+Cc'd to linux-kernel, because I don't write explanations all that often,
+and when I do I feel better about more people reading them.
+
+On Fri, 30 Jul 1999, David Mosberger wrote:
+>
+> Is there a brief description someplace on how "mm" vs. "active_mm" in
+> the task_struct are supposed to be used? (My apologies if this was
+> discussed on the mailing lists---I just returned from vacation and
+> wasn't able to follow linux-kernel for a while).
+
+Basically, the new setup is:
+
+ - we have "real address spaces" and "anonymous address spaces". The
+ difference is that an anonymous address space doesn't care about the
+ user-level page tables at all, so when we do a context switch into an
+ anonymous address space we just leave the previous address space
+ active.
+
+ The obvious use for a "anonymous address space" is any thread that
+ doesn't need any user mappings - all kernel threads basically fall into
+ this category, but even "real" threads can temporarily say that for
+ some amount of time they are not going to be interested in user space,
+ and that the scheduler might as well try to avoid wasting time on
+ switching the VM state around. Currently only the old-style bdflush
+ sync does that.
+
+ - "tsk->mm" points to the "real address space". For an anonymous process,
+ tsk->mm will be NULL, for the logical reason that an anonymous process
+ really doesn't _have_ a real address space at all.
+
+ - however, we obviously need to keep track of which address space we
+ "stole" for such an anonymous user. For that, we have "tsk->active_mm",
+ which shows what the currently active address space is.
+
+ The rule is that for a process with a real address space (ie tsk->mm is
+ non-NULL) the active_mm obviously always has to be the same as the real
+ one.
+
+ For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the
+ "borrowed" mm while the anonymous process is running. When the
+ anonymous process gets scheduled away, the borrowed address space is
+ returned and cleared.
+
+To support all that, the "struct mm_struct" now has two counters: a
+"mm_users" counter that is how many "real address space users" there are,
+and a "mm_count" counter that is the number of "lazy" users (ie anonymous
+users) plus one if there are any real users.
+
+Usually there is at least one real user, but it could be that the real
+user exited on another CPU while a lazy user was still active, so you do
+actually get cases where you have a address space that is _only_ used by
+lazy users. That is often a short-lived state, because once that thread
+gets scheduled away in favour of a real thread, the "zombie" mm gets
+released because "mm_users" becomes zero.
+
+Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any
+more. "init_mm" should be considered just a "lazy context when no other
+context is available", and in fact it is mainly used just at bootup when
+no real VM has yet been created. So code that used to check
+
+ if (current->mm == &init_mm)
+
+should generally just do
+
+ if (!current->mm)
+
+instead (which makes more sense anyway - the test is basically one of "do
+we have a user context", and is generally done by the page fault handler
+and things like that).
+
+Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
+because it slightly changes the interfaces to accomodate the alpha (who
+would have thought it, but the alpha actually ends up having one of the
+ugliest context switch codes - unlike the other architectures where the MM
+and register state is separate, the alpha PALcode joins the two, and you
+need to switch both together).
+
+(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2)
+++ /dev/null
- kmemtrace - Kernel Memory Tracer
-
- by Eduard - Gabriel Munteanu
- <eduard.munteanu@linux360.ro>
-
-I. Introduction
-===============
-
-kmemtrace helps kernel developers figure out two things:
-1) how different allocators (SLAB, SLUB etc.) perform
-2) how kernel code allocates memory and how much
-
-To do this, we trace every allocation and export information to the userspace
-through the relay interface. We export things such as the number of requested
-bytes, the number of bytes actually allocated (i.e. including internal
-fragmentation), whether this is a slab allocation or a plain kmalloc() and so
-on.
-
-The actual analysis is performed by a userspace tool (see section III for
-details on where to get it from). It logs the data exported by the kernel,
-processes it and (as of writing this) can provide the following information:
-- the total amount of memory allocated and fragmentation per call-site
-- the amount of memory allocated and fragmentation per allocation
-- total memory allocated and fragmentation in the collected dataset
-- number of cross-CPU allocation and frees (makes sense in NUMA environments)
-
-Moreover, it can potentially find inconsistent and erroneous behavior in
-kernel code, such as using slab free functions on kmalloc'ed memory or
-allocating less memory than requested (but not truly failed allocations).
-
-kmemtrace also makes provisions for tracing on some arch and analysing the
-data on another.
-
-II. Design and goals
-====================
-
-kmemtrace was designed to handle rather large amounts of data. Thus, it uses
-the relay interface to export whatever is logged to userspace, which then
-stores it. Analysis and reporting is done asynchronously, that is, after the
-data is collected and stored. By design, it allows one to log and analyse
-on different machines and different arches.
-
-As of writing this, the ABI is not considered stable, though it might not
-change much. However, no guarantees are made about compatibility yet. When
-deemed stable, the ABI should still allow easy extension while maintaining
-backward compatibility. This is described further in Documentation/ABI.
-
-Summary of design goals:
- - allow logging and analysis to be done across different machines
- - be fast and anticipate usage in high-load environments (*)
- - be reasonably extensible
- - make it possible for GNU/Linux distributions to have kmemtrace
- included in their repositories
-
-(*) - one of the reasons Pekka Enberg's original userspace data analysis
- tool's code was rewritten from Perl to C (although this is more than a
- simple conversion)
-
-
-III. Quick usage guide
-======================
-
-1) Get a kernel that supports kmemtrace and build it accordingly (i.e. enable
-CONFIG_KMEMTRACE).
-
-2) Get the userspace tool and build it:
-$ git-clone git://repo.or.cz/kmemtrace-user.git # current repository
-$ cd kmemtrace-user/
-$ ./autogen.sh
-$ ./configure
-$ make
-
-3) Boot the kmemtrace-enabled kernel if you haven't, preferably in the
-'single' runlevel (so that relay buffers don't fill up easily), and run
-kmemtrace:
-# '$' does not mean user, but root here.
-$ mount -t debugfs none /sys/kernel/debug
-$ mount -t proc none /proc
-$ cd path/to/kmemtrace-user/
-$ ./kmemtraced
-Wait a bit, then stop it with CTRL+C.
-$ cat /sys/kernel/debug/kmemtrace/total_overruns # Check if we didn't
- # overrun, should
- # be zero.
-$ (Optionally) [Run kmemtrace_check separately on each cpu[0-9]*.out file to
- check its correctness]
-$ ./kmemtrace-report
-
-Now you should have a nice and short summary of how the allocator performs.
-
-IV. FAQ and known issues
-========================
-
-Q: 'cat /sys/kernel/debug/kmemtrace/total_overruns' is non-zero, how do I fix
-this? Should I worry?
-A: If it's non-zero, this affects kmemtrace's accuracy, depending on how
-large the number is. You can fix it by supplying a higher
-'kmemtrace.subbufs=N' kernel parameter.
----
-
-Q: kmemtrace_check reports errors, how do I fix this? Should I worry?
-A: This is a bug and should be reported. It can occur for a variety of
-reasons:
- - possible bugs in relay code
- - possible misuse of relay by kmemtrace
- - timestamps being collected unorderly
-Or you may fix it yourself and send us a patch.
----
-
-Q: kmemtrace_report shows many errors, how do I fix this? Should I worry?
-A: This is a known issue and I'm working on it. These might be true errors
-in kernel code, which may have inconsistent behavior (e.g. allocating memory
-with kmem_cache_alloc() and freeing it with kfree()). Pekka Enberg pointed
-out this behavior may work with SLAB, but may fail with other allocators.
-
-It may also be due to lack of tracing in some unusual allocator functions.
-
-We don't want bug reports regarding this issue yet.
----
-
-V. See also
-===========
-
-Documentation/kernel-parameters.txt
-Documentation/ABI/testing/debugfs-kmemtrace
-
-
-This document describes the Linux memory management "Unevictable LRU"
-infrastructure and the use of this infrastructure to manage several types
-of "unevictable" pages. The document attempts to provide the overall
-rationale behind this mechanism and the rationale for some of the design
-decisions that drove the implementation. The latter design rationale is
-discussed in the context of an implementation description. Admittedly, one
-can obtain the implementation details--the "what does it do?"--by reading the
-code. One hopes that the descriptions below add value by provide the answer
-to "why does it do that?".
-
-Unevictable LRU Infrastructure:
-
-The Unevictable LRU adds an additional LRU list to track unevictable pages
-and to hide these pages from vmscan. This mechanism is based on a patch by
-Larry Woodman of Red Hat to address several scalability problems with page
+ ==============================
+ UNEVICTABLE LRU INFRASTRUCTURE
+ ==============================
+
+========
+CONTENTS
+========
+
+ (*) The Unevictable LRU
+
+ - The unevictable page list.
+ - Memory control group interaction.
+ - Marking address spaces unevictable.
+ - Detecting Unevictable Pages.
+ - vmscan's handling of unevictable pages.
+
+ (*) mlock()'d pages.
+
+ - History.
+ - Basic management.
+ - mlock()/mlockall() system call handling.
+ - Filtering special vmas.
+ - munlock()/munlockall() system call handling.
+ - Migrating mlocked pages.
+ - mmap(MAP_LOCKED) system call handling.
+ - munmap()/exit()/exec() system call handling.
+ - try_to_unmap().
+ - try_to_munlock() reverse map scan.
+ - Page reclaim in shrink_*_list().
+
+
+============
+INTRODUCTION
+============
+
+This document describes the Linux memory manager's "Unevictable LRU"
+infrastructure and the use of this to manage several types of "unevictable"
+pages.
+
+The document attempts to provide the overall rationale behind this mechanism
+and the rationale for some of the design decisions that drove the
+implementation. The latter design rationale is discussed in the context of an
+implementation description. Admittedly, one can obtain the implementation
+details - the "what does it do?" - by reading the code. One hopes that the
+descriptions below add value by provide the answer to "why does it do that?".
+
+
+===================
+THE UNEVICTABLE LRU
+===================
+
+The Unevictable LRU facility adds an additional LRU list to track unevictable
+pages and to hide these pages from vmscan. This mechanism is based on a patch
+by Larry Woodman of Red Hat to address several scalability problems with page
reclaim in Linux. The problems have been observed at customer sites on large
-memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB
-of main memory will have over 32 million 4k pages in a single zone. When a
-large fraction of these pages are not evictable for any reason [see below],
-vmscan will spend a lot of time scanning the LRU lists looking for the small
-fraction of pages that are evictable. This can result in a situation where
-all cpus are spending 100% of their time in vmscan for hours or days on end,
-with the system completely unresponsive.
-
-The Unevictable LRU infrastructure addresses the following classes of
-unevictable pages:
-
-+ page owned by ramfs
-+ page mapped into SHM_LOCKed shared memory regions
-+ page mapped into VM_LOCKED [mlock()ed] vmas
-
-The infrastructure might be able to handle other conditions that make pages
+memory x86_64 systems.
+
+To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
+main memory will have over 32 million 4k pages in a single zone. When a large
+fraction of these pages are not evictable for any reason [see below], vmscan
+will spend a lot of time scanning the LRU lists looking for the small fraction
+of pages that are evictable. This can result in a situation where all CPUs are
+spending 100% of their time in vmscan for hours or days on end, with the system
+completely unresponsive.
+
+The unevictable list addresses the following classes of unevictable pages:
+
+ (*) Those owned by ramfs.
+
+ (*) Those mapped into SHM_LOCK'd shared memory regions.
+
+ (*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
+
+The infrastructure may also be able to handle other conditions that make pages
unevictable, either by definition or by circumstance, in the future.
-The Unevictable LRU List
+THE UNEVICTABLE PAGE LIST
+-------------------------
The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
called the "unevictable" list and an associated page flag, PG_unevictable, to
-indicate that the page is being managed on the unevictable list. The
-PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active
-flag in that it indicates on which LRU list a page resides when PG_lru is set.
-The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU
-Kconfig option.
+indicate that the page is being managed on the unevictable list.
+
+The PG_unevictable flag is analogous to, and mutually exclusive with, the
+PG_active flag in that it indicates on which LRU list a page resides when
+PG_lru is set. The unevictable list is compile-time configurable based on the
+UNEVICTABLE_LRU Kconfig option.
The Unevictable LRU infrastructure maintains unevictable pages on an additional
LRU list for a few reasons:
-1) We get to "treat unevictable pages just like we treat other pages in the
- system, which means we get to use the same code to manipulate them, the
- same code to isolate them (for migrate, etc.), the same code to keep track
- of the statistics, etc..." [Rik van Riel]
+ (1) We get to "treat unevictable pages just like we treat other pages in the
+ system - which means we get to use the same code to manipulate them, the
+ same code to isolate them (for migrate, etc.), the same code to keep track
+ of the statistics, etc..." [Rik van Riel]
+
+ (2) We want to be able to migrate unevictable pages between nodes for memory
+ defragmentation, workload management and memory hotplug. The linux kernel
+ can only migrate pages that it can successfully isolate from the LRU
+ lists. If we were to maintain pages elsewhere than on an LRU-like list,
+ where they can be found by isolate_lru_page(), we would prevent their
+ migration, unless we reworked migration code to find the unevictable pages
+ itself.
-2) We want to be able to migrate unevictable pages between nodes--for memory
- defragmentation, workload management and memory hotplug. The linux kernel
- can only migrate pages that it can successfully isolate from the lru lists.
- If we were to maintain pages elsewise than on an lru-like list, where they
- can be found by isolate_lru_page(), we would prevent their migration, unless
- we reworked migration code to find the unevictable pages.
+The unevictable list does not differentiate between file-backed and anonymous,
+swap-backed pages. This differentiation is only important while the pages are,
+in fact, evictable.
-The unevictable LRU list does not differentiate between file backed and swap
-backed [anon] pages. This differentiation is only important while the pages
-are, in fact, evictable.
+The unevictable list benefits from the "arrayification" of the per-zone LRU
+lists and statistics originally proposed and posted by Christoph Lameter.
-The unevictable LRU list benefits from the "arrayification" of the per-zone
-LRU lists and statistics originally proposed and posted by Christoph Lameter.
+The unevictable list does not use the LRU pagevec mechanism. Rather,
+unevictable pages are placed directly on the page's zone's unevictable list
+under the zone lru_lock. This allows us to prevent the stranding of pages on
+the unevictable list when one task has the page isolated from the LRU and other
+tasks are changing the "evictability" state of the page.
-The unevictable list does not use the lru pagevec mechanism. Rather,
-unevictable pages are placed directly on the page's zone's unevictable
-list under the zone lru_lock. The reason for this is to prevent stranding
-of pages on the unevictable list when one task has the page isolated from the
-lru and other tasks are changing the "evictability" state of the page.
+MEMORY CONTROL GROUP INTERACTION
+--------------------------------
-Unevictable LRU and Memory Controller Interaction
+The unevictable LRU facility interacts with the memory control group [aka
+memory controller; see Documentation/cgroups/memory.txt] by extending the
+lru_list enum.
+
+The memory controller data structure automatically gets a per-zone unevictable
+list as a result of the "arrayification" of the per-zone LRU lists (one per
+lru_list enum element). The memory controller tracks the movement of pages to
+and from the unevictable list.
-The memory controller data structure automatically gets a per zone unevictable
-lru list as a result of the "arrayification" of the per-zone LRU lists. The
-memory controller tracks the movement of pages to and from the unevictable list.
When a memory control group comes under memory pressure, the controller will
not attempt to reclaim pages on the unevictable list. This has a couple of
-effects. Because the pages are "hidden" from reclaim on the unevictable list,
-the reclaim process can be more efficient, dealing only with pages that have
-a chance of being reclaimed. On the other hand, if too many of the pages
-charged to the control group are unevictable, the evictable portion of the
-working set of the tasks in the control group may not fit into the available
-memory. This can cause the control group to thrash or to oom-kill tasks.
-
-
-Unevictable LRU: Detecting Unevictable Pages
-
-The function page_evictable(page, vma) in vmscan.c determines whether a
-page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions,
-page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's
-address space using a wrapper function. Wrapper functions are used to set,
-clear and test the flag to reduce the requirement for #ifdef's throughout the
-source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created.
-This flag remains for the life of the inode.
-
-For shared memory regions, AS_UNEVICTABLE is set when an application
-successfully SHM_LOCKs the region and is removed when the region is
-SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page
-tables for the region as does, for example, mlock(). So, we make no special
-effort to push any pages in the SHM_LOCKed region to the unevictable list.
-Vmscan will do this when/if it encounters the pages during reclaim. On
-SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the
-unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed
-region is destroyed, the pages are also "rescued" from the unevictable list in
-the process of freeing them.
-
-page_evictable() detects mlock()ed pages by testing an additional page flag,
-PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a
-non-NULL vma is supplied, page_evictable() will check whether the vma is
+effects:
+
+ (1) Because the pages are "hidden" from reclaim on the unevictable list, the
+ reclaim process can be more efficient, dealing only with pages that have a
+ chance of being reclaimed.
+
+ (2) On the other hand, if too many of the pages charged to the control group
+ are unevictable, the evictable portion of the working set of the tasks in
+ the control group may not fit into the available memory. This can cause
+ the control group to thrash or to OOM-kill tasks.
+
+
+MARKING ADDRESS SPACES UNEVICTABLE
+----------------------------------
+
+For facilities such as ramfs none of the pages attached to the address space
+may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE
+address space flag is provided, and this can be manipulated by a filesystem
+using a number of wrapper functions:
+
+ (*) void mapping_set_unevictable(struct address_space *mapping);
+
+ Mark the address space as being completely unevictable.
+
+ (*) void mapping_clear_unevictable(struct address_space *mapping);
+
+ Mark the address space as being evictable.
+
+ (*) int mapping_unevictable(struct address_space *mapping);
+
+ Query the address space, and return true if it is completely
+ unevictable.
+
+These are currently used in two places in the kernel:
+
+ (1) By ramfs to mark the address spaces of its inodes when they are created,
+ and this mark remains for the life of the inode.
+
+ (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
+
+ Note that SHM_LOCK is not required to page in the locked pages if they're
+ swapped out; the application must touch the pages manually if it wants to
+ ensure they're in memory.
+
+
+DETECTING UNEVICTABLE PAGES
+---------------------------
+
+The function page_evictable() in vmscan.c determines whether a page is
+evictable or not using the query function outlined above [see section "Marking
+address spaces unevictable"] to check the AS_UNEVICTABLE flag.
+
+For address spaces that are so marked after being populated (as SHM regions
+might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
+the page tables for the region as does, for example, mlock(), nor need it make
+any special effort to push any pages in the SHM_LOCK'd area to the unevictable
+list. Instead, vmscan will do this if and when it encounters the pages during
+a reclamation scan.
+
+On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
+the pages in the region and "rescue" them from the unevictable list if no other
+condition is keeping them unevictable. If an unevictable region is destroyed,
+the pages are also "rescued" from the unevictable list in the process of
+freeing them.
+
+page_evictable() also checks for mlocked pages by testing an additional page
+flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked,
+and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is
VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and
update the appropriate statistics if the vma is VM_LOCKED. This method allows
efficient "culling" of pages in the fault path that are being faulted in to
-VM_LOCKED vmas.
+VM_LOCKED VMAs.
-Unevictable Pages and Vmscan [shrink_*_list()]
+VMSCAN'S HANDLING OF UNEVICTABLE PAGES
+--------------------------------------
If unevictable pages are culled in the fault path, or moved to the unevictable
-list at mlock() or mmap() time, vmscan will never encounter the pages until
-they have become evictable again, for example, via munlock() and have been
-"rescued" from the unevictable list. However, there may be situations where we
-decide, for the sake of expediency, to leave a unevictable page on one of the
-regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for
-such pages in all of the shrink_{active|inactive|page}_list() functions and
-will "cull" such pages that it encounters--that is, it diverts those pages to
-the unevictable list for the zone being scanned.
-
-There may be situations where a page is mapped into a VM_LOCKED vma, but the
-page is not marked as PageMlocked. Such pages will make it all the way to
+list at mlock() or mmap() time, vmscan will not encounter the pages until they
+have become evictable again (via munlock() for example) and have been "rescued"
+from the unevictable list. However, there may be situations where we decide,
+for the sake of expediency, to leave a unevictable page on one of the regular
+active/inactive LRU lists for vmscan to deal with. vmscan checks for such
+pages in all of the shrink_{active|inactive|page}_list() functions and will
+"cull" such pages that it encounters: that is, it diverts those pages to the
+unevictable list for the zone being scanned.
+
+There may be situations where a page is mapped into a VM_LOCKED VMA, but the
+page is not marked as PG_mlocked. Such pages will make it all the way to
shrink_page_list() where they will be detected when vmscan walks the reverse
-map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list()
-will cull the page at that point.
+map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK,
+shrink_page_list() will cull the page at that point.
-To "cull" an unevictable page, vmscan simply puts the page back on the lru
-list using putback_lru_page()--the inverse operation to isolate_lru_page()--
-after dropping the page lock. Because the condition which makes the page
-unevictable may change once the page is unlocked, putback_lru_page() will
-recheck the unevictable state of a page that it places on the unevictable lru
-list. If the page has become unevictable, putback_lru_page() removes it from
-the list and retries, including the page_unevictable() test. Because such a
-race is a rare event and movement of pages onto the unevictable list should be
-rare, these extra evictabilty checks should not occur in the majority of calls
-to putback_lru_page().
+To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
+using putback_lru_page() - the inverse operation to isolate_lru_page() - after
+dropping the page lock. Because the condition which makes the page unevictable
+may change once the page is unlocked, putback_lru_page() will recheck the
+unevictable state of a page that it places on the unevictable list. If the
+page has become unevictable, putback_lru_page() removes it from the list and
+retries, including the page_unevictable() test. Because such a race is a rare
+event and movement of pages onto the unevictable list should be rare, these
+extra evictabilty checks should not occur in the majority of calls to
+putback_lru_page().
-Mlocked Page: Prior Work
+=============
+MLOCKED PAGES
+=============
-The "Unevictable Mlocked Pages" infrastructure is based on work originally
+The unevictable page list is also useful for mlock(), in addition to ramfs and
+SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in
+NOMMU situations, all mappings are effectively mlocked.
+
+
+HISTORY
+-------
+
+The "Unevictable mlocked Pages" infrastructure is based on work originally
posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
-Nick posted his patch as an alternative to a patch posted by Christoph
-Lameter to achieve the same objective--hiding mlocked pages from vmscan.
-In Nick's patch, he used one of the struct page lru list link fields as a count
-of VM_LOCKED vmas that map the page. This use of the link field for a count
-prevented the management of the pages on an LRU list. Thus, mlocked pages were
-not migratable as isolate_lru_page() could not find them and the lru list link
-field was not available to the migration subsystem. Nick resolved this by
-putting mlocked pages back on the lru list before attempting to isolate them,
-thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated
-with the Unevictable LRU work, the count was replaced by walking the reverse
-map to determine whether any VM_LOCKED vmas mapped the page. More on this
-below.
-
-
-Mlocked Pages: Basic Management
-
-Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of
-unevictable pages. When such a page has been "noticed" by the memory
-management subsystem, the page is marked with the PG_mlocked [PageMlocked()]
-flag. A PageMlocked() page will be placed on the unevictable LRU list when
-it is added to the LRU. Pages can be "noticed" by memory management in
-several places:
-
-1) in the mlock()/mlockall() system call handlers.
-2) in the mmap() system call handler when mmap()ing a region with the
- MAP_LOCKED flag, or mmap()ing a region in a task that has called
- mlockall() with the MCL_FUTURE flag. Both of these conditions result
- in the VM_LOCKED flag being set for the vma.
-3) in the fault path, if mlocked pages are "culled" in the fault path,
- and when a VM_LOCKED stack segment is expanded.
-4) as mentioned above, in vmscan:shrink_page_list() when attempting to
- reclaim a page in a VM_LOCKED vma via try_to_unmap().
-
-Mlocked pages become unlocked and rescued from the unevictable list when:
-
-1) mapped in a range unlocked via the munlock()/munlockall() system calls.
-2) munmapped() out of the last VM_LOCKED vma that maps the page, including
- unmapping at task exit.
-3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file.
-4) before a page is COWed in a VM_LOCKED vma.
-
-
-Mlocked Pages: mlock()/mlockall() System Call Handling
+Nick posted his patch as an alternative to a patch posted by Christoph Lameter
+to achieve the same objective: hiding mlocked pages from vmscan.
+
+In Nick's patch, he used one of the struct page LRU list link fields as a count
+of VM_LOCKED VMAs that map the page. This use of the link field for a count
+prevented the management of the pages on an LRU list, and thus mlocked pages
+were not migratable as isolate_lru_page() could not find them, and the LRU list
+link field was not available to the migration subsystem.
+
+Nick resolved this by putting mlocked pages back on the lru list before
+attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When
+Nick's patch was integrated with the Unevictable LRU work, the count was
+replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
+mapped the page. More on this below.
+
+
+BASIC MANAGEMENT
+----------------
+
+mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
+pages. When such a page has been "noticed" by the memory management subsystem,
+the page is marked with the PG_mlocked flag. This can be manipulated using the
+PageMlocked() functions.
+
+A PG_mlocked page will be placed on the unevictable list when it is added to
+the LRU. Such pages can be "noticed" by memory management in several places:
+
+ (1) in the mlock()/mlockall() system call handlers;
+
+ (2) in the mmap() system call handler when mmapping a region with the
+ MAP_LOCKED flag;
+
+ (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
+ flag
+
+ (4) in the fault path, if mlocked pages are "culled" in the fault path,
+ and when a VM_LOCKED stack segment is expanded; or
+
+ (5) as mentioned above, in vmscan:shrink_page_list() when attempting to
+ reclaim a page in a VM_LOCKED VMA via try_to_unmap()
+
+all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
+already have it set.
+
+mlocked pages become unlocked and rescued from the unevictable list when:
+
+ (1) mapped in a range unlocked via the munlock()/munlockall() system calls;
+
+ (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
+ unmapping at task exit;
+
+ (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
+ or
+
+ (4) before a page is COW'd in a VM_LOCKED VMA.
+
+
+mlock()/mlockall() SYSTEM CALL HANDLING
+---------------------------------------
Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
-for each vma in the range specified by the call. In the case of mlockall(),
+for each VMA in the range specified by the call. In the case of mlockall(),
this is the entire active address space of the task. Note that mlock_fixup()
-is used for both mlock()ing and munlock()ing a range of memory. A call to
-mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED
-is treated as a no-op--mlock_fixup() simply returns.
-
-If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas"
-below, mlock_fixup() will attempt to merge the vma with its neighbors or split
-off a subset of the vma if the range does not cover the entire vma. Once the
-vma has been merged or split or neither, mlock_fixup() will call
-__mlock_vma_pages_range() to fault in the pages via get_user_pages() and
-to mark the pages as mlocked via mlock_vma_page().
-
-Note that the vma being mlocked might be mapped with PROT_NONE. In this case,
-get_user_pages() will be unable to fault in the pages. That's OK. If pages
-do end up getting faulted into this VM_LOCKED vma, we'll handle them in the
+is used for both mlocking and munlocking a range of memory. A call to mlock()
+an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
+treated as a no-op, and mlock_fixup() simply returns.
+
+If the VMA passes some filtering as described in "Filtering Special Vmas"
+below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
+off a subset of the VMA if the range does not cover the entire VMA. Once the
+VMA has been merged or split or neither, mlock_fixup() will call
+__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to
+mark the pages as mlocked via mlock_vma_page().
+
+Note that the VMA being mlocked might be mapped with PROT_NONE. In this case,
+get_user_pages() will be unable to fault in the pages. That's okay. If pages
+do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
fault path or in vmscan.
Also note that a page returned by get_user_pages() could be truncated or
-migrated out from under us, while we're trying to mlock it. To detect
-this, __mlock_vma_pages_range() tests the page_mapping after acquiring
-the page lock. If the page is still associated with its mapping, we'll
-go ahead and call mlock_vma_page(). If the mapping is gone, we just
-unlock the page and move on. Worse case, this results in page mapped
-in a VM_LOCKED vma remaining on a normal LRU list without being
-PageMlocked(). Again, vmscan will detect and cull such pages.
-
-mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will
-TestSetPageMlocked() for each page returned by get_user_pages(). We use
-TestSetPageMlocked() because the page might already be mlocked by another
-task/vma and we don't want to do extra work. We especially do not want to
-count an mlocked page more than once in the statistics. If the page was
-already mlocked, mlock_vma_page() is done.
+migrated out from under us, while we're trying to mlock it. To detect this,
+__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock.
+If the page is still associated with its mapping, we'll go ahead and call
+mlock_vma_page(). If the mapping is gone, we just unlock the page and move on.
+In the worst case, this will result in a page mapped in a VM_LOCKED VMA
+remaining on a normal LRU list without being PageMlocked(). Again, vmscan will
+detect and cull such pages.
+
+mlock_vma_page() will call TestSetPageMlocked() for each page returned by
+get_user_pages(). We use TestSetPageMlocked() because the page might already
+be mlocked by another task/VMA and we don't want to do extra work. We
+especially do not want to count an mlocked page more than once in the
+statistics. If the page was already mlocked, mlock_vma_page() need do nothing
+more.
If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
page from the LRU, as it is likely on the appropriate active or inactive list
-at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will
-putback the page--putback_lru_page()--which will notice that the page is now
-mlocked and divert the page to the zone's unevictable LRU list. If
+at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put
+back the page - by calling putback_lru_page() - which will notice that the page
+is now mlocked and divert the page to the zone's unevictable list. If
mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
-it later if/when it attempts to reclaim the page.
+it later if and when it attempts to reclaim the page.
-Mlocked Pages: Filtering Special Vmas
+FILTERING SPECIAL VMAS
+----------------------
-mlock_fixup() filters several classes of "special" vmas:
+mlock_fixup() filters several classes of "special" VMAs:
-1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind
+1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind
these mappings are inherently pinned, so we don't need to mark them as
- mlocked. In any case, most of the pages have no struct page in which to
- so mark the page. Because of this, get_user_pages() will fail for these
- vmas, so there is no sense in attempting to visit them.
-
-2) vmas mapping hugetlbfs page are already effectively pinned into memory.
- We don't need nor want to mlock() these pages. However, to preserve the
- prior behavior of mlock()--before the unevictable/mlock changes--
- mlock_fixup() will call make_pages_present() in the hugetlbfs vma range
- to allocate the huge pages and populate the ptes.
-
-3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of
- kernel pages, such as the vdso page, relay channel pages, etc. These pages
+ mlocked. In any case, most of the pages have no struct page in which to so
+ mark the page. Because of this, get_user_pages() will fail for these VMAs,
+ so there is no sense in attempting to visit them.
+
+2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We
+ neither need nor want to mlock() these pages. However, to preserve the
+ prior behavior of mlock() - before the unevictable/mlock changes -
+ mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
+ allocate the huge pages and populate the ptes.
+
+3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of
+ kernel pages, such as the VDSO page, relay channel pages, etc. These pages
are inherently unevictable and are not managed on the LRU lists.
- mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls
+ mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls
make_pages_present() to populate the ptes.
-Note that for all of these special vmas, mlock_fixup() does not set the
+Note that for all of these special VMAs, mlock_fixup() does not set the
VM_LOCKED flag. Therefore, we won't have to deal with them later during
-munlock() or munmap()--for example, at task exit. Neither does mlock_fixup()
-account these vmas against the task's "locked_vm".
-
-Mlocked Pages: Downgrading the Mmap Semaphore.
-
-mlock_fixup() must be called with the mmap semaphore held for write, because
-it may have to merge or split vmas. However, mlocking a large region of
-memory can take a long time--especially if vmscan must reclaim pages to
-satisfy the regions requirements. Faulting in a large region with the mmap
-semaphore held for write can hold off other faults on the address space, in
-the case of a multi-threaded task. It can also hold off scans of the task's
-address space via /proc. While testing under heavy load, it was observed that
-the ps(1) command could be held off for many minutes while a large segment was
-mlock()ed down.
-
-To address this issue, and to make the system more responsive during mlock()ing
-of large segments, mlock_fixup() downgrades the mmap semaphore to read mode
-during the call to __mlock_vma_pages_range(). This works fine. However, the
-callers of mlock_fixup() expect the semaphore to be returned in write mode.
-So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not
-support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore
-and reacquire it in write mode. In a multi-threaded task, it is possible for
-the task memory map to change while the semaphore is dropped. Therefore,
-mlock_fixup() looks up the vma at the range start address after reacquiring
-the semaphore in write mode and verifies that it still covers the original
-range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of
-mlock_fixup() have been changed to deal with this new error condition.
-
-Note: when munlocking a region, all of the pages should already be resident--
-unless we have racing threads mlocking() and munlocking() regions. So,
-unlocking should not have to wait for page allocations nor faults of any kind.
-Therefore mlock_fixup() does not downgrade the semaphore for munlock().
-
-
-Mlocked Pages: munlock()/munlockall() System Call Handling
-
-The munlock() and munlockall() system calls are handled by the same functions--
-do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock
-vs lock operation indicated by an argument. So, these system calls are also
-handled by mlock_fixup(). Again, if called for an already munlock()ed vma,
-mlock_fixup() simply returns. Because of the vma filtering discussed above,
-VM_LOCKED will not be set in any "special" vmas. So, these vmas will be
+munlock(), munmap() or task exit. Neither does mlock_fixup() account these
+VMAs against the task's "locked_vm".
+
+
+munlock()/munlockall() SYSTEM CALL HANDLING
+-------------------------------------------
+
+The munlock() and munlockall() system calls are handled by the same functions -
+do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
+lock operation indicated by an argument. So, these system calls are also
+handled by mlock_fixup(). Again, if called for an already munlocked VMA,
+mlock_fixup() simply returns. Because of the VMA filtering discussed above,
+VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be
ignored for munlock.
-If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off
-the specified range. The range is then munlocked via the function
-__mlock_vma_pages_range()--the same function used to mlock a vma range--
+If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
+specified range. The range is then munlocked via the function
+__mlock_vma_pages_range() - the same function used to mlock a VMA range -
passing a flag to indicate that munlock() is being performed.
-Because the vma access protections could have been changed to PROT_NONE after
+Because the VMA access protections could have been changed to PROT_NONE after
faulting in and mlocking pages, get_user_pages() was unreliable for visiting
-these pages for munlocking. Because we don't want to leave pages mlocked(),
+these pages for munlocking. Because we don't want to leave pages mlocked,
get_user_pages() was enhanced to accept a flag to ignore the permissions when
-fetching the pages--all of which should be resident as a result of previous
-mlock()ing.
+fetching the pages - all of which should be resident as a result of previous
+mlocking.
For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling
munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked
-flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page()
-use the Test*PageMlocked() function to handle the case where the page might
-have already been unlocked by another task. If the page was mlocked,
-munlock_vma_page() updates that zone statistics for the number of mlocked
-pages. Note, however, that at this point we haven't checked whether the page
-is mapped by other VM_LOCKED vmas.
-
-We can't call try_to_munlock(), the function that walks the reverse map to check
-for other VM_LOCKED vmas, without first isolating the page from the LRU.
+flag using TestClearPageMlocked(). As with mlock_vma_page(),
+munlock_vma_page() use the Test*PageMlocked() function to handle the case where
+the page might have already been unlocked by another task. If the page was
+mlocked, munlock_vma_page() updates that zone statistics for the number of
+mlocked pages. Note, however, that at this point we haven't checked whether
+the page is mapped by other VM_LOCKED VMAs.
+
+We can't call try_to_munlock(), the function that walks the reverse map to
+check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
-not be on an lru list. [More on these below.] However, the call to
-isolate_lru_page() could fail, in which case we couldn't try_to_munlock().
-So, we go ahead and clear PG_mlocked up front, as this might be the only chance
-we have. If we can successfully isolate the page, we go ahead and
+not be on an LRU list [more on these below]. However, the call to
+isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So,
+we go ahead and clear PG_mlocked up front, as this might be the only chance we
+have. If we can successfully isolate the page, we go ahead and
try_to_munlock(), which will restore the PG_mlocked flag and update the zone
-page statistics if it finds another vma holding the page mlocked. If we fail
+page statistics if it finds another VMA holding the page mlocked. If we fail
to isolate the page, we'll have left a potentially mlocked page on the LRU.
-This is fine, because we'll catch it later when/if vmscan tries to reclaim the
-page. This should be relatively rare.
-
-Mlocked Pages: Migrating Them...
-
-A page that is being migrated has been isolated from the lru lists and is
-held locked across unmapping of the page, updating the page's mapping
-[address_space] entry and copying the contents and state, until the
-page table entry has been replaced with an entry that refers to the new
-page. Linux supports migration of mlocked pages and other unevictable
-pages. This involves simply moving the PageMlocked and PageUnevictable states
-from the old page to the new page.
-
-Note that page migration can race with mlocking or munlocking of the same
-page. This has been discussed from the mlock/munlock perspective in the
-respective sections above. Both processes [migration, m[un]locking], hold
-the page locked. This provides the first level of synchronization. Page
-migration zeros out the page_mapping of the old page before unlocking it,
-so m[un]lock can skip these pages by testing the page mapping under page
-lock.
-
-When completing page migration, we place the new and old pages back onto the
-lru after dropping the page lock. The "unneeded" page--old page on success,
-new page on failure--will be freed when the reference count held by the
-migration process is released. To ensure that we don't strand pages on the
-unevictable list because of a race between munlock and migration, page
-migration uses the putback_lru_page() function to add migrated pages back to
-the lru.
-
-
-Mlocked Pages: mmap(MAP_LOCKED) System Call Handling
+This is fine, because we'll catch it later if and if vmscan tries to reclaim
+the page. This should be relatively rare.
+
+
+MIGRATING MLOCKED PAGES
+-----------------------
+
+A page that is being migrated has been isolated from the LRU lists and is held
+locked across unmapping of the page, updating the page's address space entry
+and copying the contents and state, until the page table entry has been
+replaced with an entry that refers to the new page. Linux supports migration
+of mlocked pages and other unevictable pages. This involves simply moving the
+PG_mlocked and PG_unevictable states from the old page to the new page.
+
+Note that page migration can race with mlocking or munlocking of the same page.
+This has been discussed from the mlock/munlock perspective in the respective
+sections above. Both processes (migration and m[un]locking) hold the page
+locked. This provides the first level of synchronization. Page migration
+zeros out the page_mapping of the old page before unlocking it, so m[un]lock
+can skip these pages by testing the page mapping under page lock.
+
+To complete page migration, we place the new and old pages back onto the LRU
+after dropping the page lock. The "unneeded" page - old page on success, new
+page on failure - will be freed when the reference count held by the migration
+process is released. To ensure that we don't strand pages on the unevictable
+list because of a race between munlock and migration, page migration uses the
+putback_lru_page() function to add migrated pages back to the LRU.
+
+
+mmap(MAP_LOCKED) SYSTEM CALL HANDLING
+-------------------------------------
In addition the the mlock()/mlockall() system calls, an application can request
-that a region of memory be mlocked using the MAP_LOCKED flag with the mmap()
+that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
-in the newly mapped memory being mlocked. Before the unevictable/mlock changes,
-the kernel simply called make_pages_present() to allocate pages and populate
-the page table.
+in the newly mapped memory being mlocked. Before the unevictable/mlock
+changes, the kernel simply called make_pages_present() to allocate pages and
+populate the page table.
To mlock a range of memory under the unevictable/mlock infrastructure, the
mmap() handler and task address space expansion functions call
mlock_vma_pages_range() specifying the vma and the address range to mlock.
-mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in
-"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will
-have already been set by the caller, in filtered vmas. Thus these vma's need
-not be visited for munlock when the region is unmapped.
+mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in
+"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have
+already been set by the caller, in filtered VMAs. Thus these VMA's need not be
+visited for munlock when the region is unmapped.
-For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
+For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
fault/allocate the pages and mlock them. Again, like mlock_fixup(),
mlock_vma_pages_range() downgrades the mmap semaphore to read mode before
-attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore
+attempting to fault/allocate and mlock the pages and "upgrades" the semaphore
back to write mode before returning.
-The callers of mlock_vma_pages_range() will have already added the memory
-range to be mlocked to the task's "locked_vm". To account for filtered vmas,
+The callers of mlock_vma_pages_range() will have already added the memory range
+to be mlocked to the task's "locked_vm". To account for filtered VMAs,
mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the
-callers then subtract a non-negative return value from the task's locked_vm.
-A negative return value represent an error--for example, from get_user_pages()
-attempting to fault in a vma with PROT_NONE access. In this case, we leave
-the memory range accounted as locked_vm, as the protections could be changed
-later and pages allocated into that region.
+callers then subtract a non-negative return value from the task's locked_vm. A
+negative return value represent an error - for example, from get_user_pages()
+attempting to fault in a VMA with PROT_NONE access. In this case, we leave the
+memory range accounted as locked_vm, as the protections could be changed later
+and pages allocated into that region.
-Mlocked Pages: munmap()/exit()/exec() System Call Handling
+munmap()/exit()/exec() SYSTEM CALL HANDLING
+-------------------------------------------
When unmapping an mlocked region of memory, whether by an explicit call to
munmap() or via an internal unmap from exit() or exec() processing, we must
-munlock the pages if we're removing the last VM_LOCKED vma that maps the pages.
+munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
Before the unevictable/mlock changes, mlocking did not mark the pages in any
way, so unmapping them required no processing.
To munlock a range of memory under the unevictable/mlock infrastructure, the
-munmap() hander and task address space tear down function call
+munmap() handler and task address space call tear down function
munlock_vma_pages_all(). The name reflects the observation that one always
-specifies the entire vma range when munlock()ing during unmap of a region.
-Because of the vma filtering when mlocking() regions, only "normal" vmas that
+specifies the entire VMA range when munlock()ing during unmap of a region.
+Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
actually contain mlocked pages will be passed to munlock_vma_pages_all().
-munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup()
+munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
for the munlock case, calls __munlock_vma_pages_range() to walk the page table
-for the vma's memory range and munlock_vma_page() each resident page mapped by
-the vma. This effectively munlocks the page, only if this is the last
-VM_LOCKED vma that maps the page.
-
+for the VMA's memory range and munlock_vma_page() each resident page mapped by
+the VMA. This effectively munlocks the page, only if this is the last
+VM_LOCKED VMA that maps the page.
-Mlocked Page: try_to_unmap()
-[Note: the code changes represented by this section are really quite small
-compared to the text to describe what happening and why, and to discuss the
-implications.]
+try_to_unmap()
+--------------
-Pages can, of course, be mapped into multiple vmas. Some of these vmas may
+Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may
have VM_LOCKED flag set. It is possible for a page mapped into one or more
-VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one
-of the active or inactive LRU lists. This could happen if, for example, a
-task in the process of munlock()ing the page could not isolate the page from
-the LRU. As a result, vmscan/shrink_page_list() might encounter such a page
-as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To
-handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED
-vmas while it is walking a page's reverse map.
+VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
+of the active or inactive LRU lists. This could happen if, for example, a task
+in the process of munlocking the page could not isolate the page from the LRU.
+As a result, vmscan/shrink_page_list() might encounter such a page as described
+in section "vmscan's handling of unevictable pages". To handle this situation,
+try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
+map.
try_to_unmap() is always called, by either vmscan for reclaim or for page
-migration, with the argument page locked and isolated from the LRU. BUG_ON()
-assertions enforce this requirement. Separate functions handle anonymous and
-mapped file pages, as these types of pages have different reverse map
-mechanisms.
-
- try_to_unmap_anon()
-
-To unmap anonymous pages, each vma in the list anchored in the anon_vma must be
-visited--at least until a VM_LOCKED vma is encountered. If the page is being
-unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked
-pages are migratable. However, for reclaim, if the page is mapped into a
-VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap
-semphore of the mm_struct to which the vma belongs in read mode. If this is
-successful, try_to_unmap() will mlock the page via mlock_vma_page()--we
-wouldn't have gotten to try_to_unmap() if the page were already mlocked--and
-will return SWAP_MLOCK, indicating that the page is unevictable. If the
-mmap semaphore cannot be acquired, we are not sure whether the page is really
-unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN.
-
- try_to_unmap_file() -- linear mappings
-
-Unmapping of a mapped file page works the same, except that the scan visits
-all vmas that maps the page's index/page offset in the page's mapping's
-reverse map priority search tree. It must also visit each vma in the page's
-mapping's non-linear list, if the list is non-empty. As for anonymous pages,
-on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will
-attempt to acquire the associated mm_struct's mmap semaphore to mlock the page,
-returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not.
-
- try_to_unmap_file() -- non-linear mappings
-
-If a page's mapping contains a non-empty non-linear mapping vma list, then
-try_to_un{map|lock}() must also visit each vma in that list to determine
-whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit
-all vmas in the non-linear list to ensure that the pages is not/should not be
-mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate.
-However, there is no easy way to determine whether the page is actually mapped
-in a given vma--either for unmapping or testing whether the VM_LOCKED vma
-actually pins the page.
-
-So, try_to_unmap_file() handles non-linear mappings by scanning a certain
-number of pages--a "cluster"--in each non-linear vma associated with the page's
-mapping, for each file mapped page that vmscan tries to unmap. If this happens
-to unmap the page we're trying to unmap, try_to_unmap() will notice this on
-return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it
-will return SWAP_AGAIN, causing vmscan to recirculate this page. We take
-advantage of the cluster scan in try_to_unmap_cluster() as follows:
-
-For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap
-semaphore of the associated mm_struct for read without blocking. If this
-attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will
-retain the mmap semaphore for the scan; otherwise it drops it here. Then,
-for each page in the cluster, if we're holding the mmap semaphore for a locked
-vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This
-call is a no-op if the page is already locked, but will mlock any pages in
-the non-linear mapping that happen to be unlocked. If one of the pages so
-mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will
-return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan
-to cull the page, rather than recirculating it on the inactive list. Again,
-if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns
-SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but
-couldn't be mlocked.
-
-
-Mlocked pages: try_to_munlock() Reverse Map Scan
-
-TODO/FIXME: a better name might be page_mlocked()--analogous to the
-page_referenced() reverse map walker.
-
-When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall()
-System Call Handling" above--tries to munlock a page, it needs to
-determine whether or not the page is mapped by any VM_LOCKED vma, without
-actually attempting to unmap all ptes from the page. For this purpose, the
-unevictable/mlock infrastructure introduced a variant of try_to_unmap() called
-try_to_munlock().
+migration, with the argument page locked and isolated from the LRU. Separate
+functions handle anonymous and mapped file pages, as these types of pages have
+different reverse map mechanisms.
+
+ (*) try_to_unmap_anon()
+
+ To unmap anonymous pages, each VMA in the list anchored in the anon_vma
+ must be visited - at least until a VM_LOCKED VMA is encountered. If the
+ page is being unmapped for migration, VM_LOCKED VMAs do not stop the
+ process because mlocked pages are migratable. However, for reclaim, if
+ the page is mapped into a VM_LOCKED VMA, the scan stops.
+
+ try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+ the mm_struct to which the VMA belongs. If this is successful, it will
+ mlock the page via mlock_vma_page() - we wouldn't have gotten to
+ try_to_unmap_anon() if the page were already mlocked - and will return
+ SWAP_MLOCK, indicating that the page is unevictable.
+
+ If the mmap semaphore cannot be acquired, we are not sure whether the page
+ is really unevictable or not. In this case, try_to_unmap_anon() will
+ return SWAP_AGAIN.
+
+ (*) try_to_unmap_file() - linear mappings
+
+ Unmapping of a mapped file page works the same as for anonymous mappings,
+ except that the scan visits all VMAs that map the page's index/page offset
+ in the page's mapping's reverse map priority search tree. It also visits
+ each VMA in the page's mapping's non-linear list, if the list is
+ non-empty.
+
+ As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file
+ page, try_to_unmap_file() will attempt to acquire the associated
+ mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this
+ is successful, and SWAP_AGAIN, if not.
+
+ (*) try_to_unmap_file() - non-linear mappings
+
+ If a page's mapping contains a non-empty non-linear mapping VMA list, then
+ try_to_un{map|lock}() must also visit each VMA in that list to determine
+ whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit
+ all VMAs in the non-linear list to ensure that the pages is not/should not
+ be mlocked.
+
+ If a VM_LOCKED VMA is found in the list, the scan could terminate.
+ However, there is no easy way to determine whether the page is actually
+ mapped in a given VMA - either for unmapping or testing whether the
+ VM_LOCKED VMA actually pins the page.
+
+ try_to_unmap_file() handles non-linear mappings by scanning a certain
+ number of pages - a "cluster" - in each non-linear VMA associated with the
+ page's mapping, for each file mapped page that vmscan tries to unmap. If
+ this happens to unmap the page we're trying to unmap, try_to_unmap() will
+ notice this on return (page_mapcount(page) will be 0) and return
+ SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to
+ recirculate this page. We take advantage of the cluster scan in
+ try_to_unmap_cluster() as follows:
+
+ For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the
+ mmap semaphore of the associated mm_struct for read without blocking.
+
+ If this attempt is successful and the VMA is VM_LOCKED,
+ try_to_unmap_cluster() will retain the mmap semaphore for the scan;
+ otherwise it drops it here.
+
+ Then, for each page in the cluster, if we're holding the mmap semaphore
+ for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to
+ mlock the page. This call is a no-op if the page is already locked,
+ but will mlock any pages in the non-linear mapping that happen to be
+ unlocked.
+
+ If one of the pages so mlocked is the page passed in to try_to_unmap(),
+ try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default
+ SWAP_AGAIN. This will allow vmscan to cull the page, rather than
+ recirculating it on the inactive list.
+
+ Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it
+ returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED
+ VMA, but couldn't be mlocked.
+
+
+try_to_munlock() REVERSE MAP SCAN
+---------------------------------
+
+ [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
+ page_referenced() reverse map walker.
+
+When munlock_vma_page() [see section "munlock()/munlockall() System Call
+Handling" above] tries to munlock a page, it needs to determine whether or not
+the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
+all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
+introduced a variant of try_to_unmap() called try_to_munlock().
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
mapped file pages with an additional argument specifing unlock versus unmap
processing. Again, these functions walk the respective reverse maps looking
-for VM_LOCKED vmas. When such a vma is found for anonymous pages and file
+for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file
pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
attempt to acquire the associated mmap semphore, mlock the page via
mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the
pre-clearing of the page's PG_mlocked done by munlock_vma_page.
-If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap
-semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list()
-to recycle the page on the inactive list and hope that it has better luck
-with the page next time.
-
-For file pages mapped into non-linear vmas, the try_to_munlock() logic works
-slightly differently. On encountering a VM_LOCKED non-linear vma that might
-map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking
-the page. munlock_vma_page() will just leave the page unlocked and let
-vmscan deal with it--the usual fallback position.
-
-Note that try_to_munlock()'s reverse map walk must visit every vma in a pages'
-reverse map to determine that a page is NOT mapped into any VM_LOCKED vma.
-However, the scan can terminate when it encounters a VM_LOCKED vma and can
-successfully acquire the vma's mmap semphore for read and mlock the page.
-Although try_to_munlock() can be called many [very many!] times when
-munlock()ing a large region or tearing down a large address space that has been
-mlocked via mlockall(), overall this is a fairly rare event.
-
-Mlocked Page: Page Reclaim in shrink_*_list()
-
-shrink_active_list() culls any obviously unevictable pages--i.e.,
-!page_evictable(page, NULL)--diverting these to the unevictable lru
-list. However, shrink_active_list() only sees unevictable pages that
-made it onto the active/inactive lru lists. Note that these pages do not
-have PageUnevictable set--otherwise, they would be on the unevictable list and
-shrink_active_list would never see them.
+If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap
+semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to
+recycle the page on the inactive list and hope that it has better luck with the
+page next time.
+
+For file pages mapped into non-linear VMAs, the try_to_munlock() logic works
+slightly differently. On encountering a VM_LOCKED non-linear VMA that might
+map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the
+page. munlock_vma_page() will just leave the page unlocked and let vmscan deal
+with it - the usual fallback position.
+
+Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
+reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
+However, the scan can terminate when it encounters a VM_LOCKED VMA and can
+successfully acquire the VMA's mmap semphore for read and mlock the page.
+Although try_to_munlock() might be called a great many times when munlocking a
+large region or tearing down a large address space that has been mlocked via
+mlockall(), overall this is a fairly rare event.
+
+
+PAGE RECLAIM IN shrink_*_list()
+-------------------------------
+
+shrink_active_list() culls any obviously unevictable pages - i.e.
+!page_evictable(page, NULL) - diverting these to the unevictable list.
+However, shrink_active_list() only sees unevictable pages that made it onto the
+active/inactive lru lists. Note that these pages do not have PageUnevictable
+set - otherwise they would be on the unevictable list and shrink_active_list
+would never see them.
Some examples of these unevictable pages on the LRU lists are:
-1) ramfs pages that have been placed on the lru lists when first allocated.
+ (1) ramfs pages that have been placed on the LRU lists when first allocated.
+
+ (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to
+ allocate or fault in the pages in the shared memory region. This happens
+ when an application accesses the page the first time after SHM_LOCK'ing
+ the segment.
-2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to
- allocate or fault in the pages in the shared memory region. This happens
- when an application accesses the page the first time after SHM_LOCKing
- the segment.
+ (3) mlocked pages that could not be isolated from the LRU and moved to the
+ unevictable list in mlock_vma_page().
-3) Mlocked pages that could not be isolated from the lru and moved to the
- unevictable list in mlock_vma_page().
+ (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't
+ acquire the VMA's mmap semaphore to test the flags and set PageMlocked.
+ munlock_vma_page() was forced to let the page back on to the normal LRU
+ list for vmscan to handle.
-3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't
- acquire the vma's mmap semaphore to test the flags and set PageMlocked.
- munlock_vma_page() was forced to let the page back on to the normal
- LRU list for vmscan to handle.
+shrink_inactive_list() also diverts any unevictable pages that it finds on the
+inactive lists to the appropriate zone's unevictable list.
-shrink_inactive_list() also culls any unevictable pages that it finds on
-the inactive lists, again diverting them to the appropriate zone's unevictable
-lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became
-SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or
-pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from
-the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice
-the latter, but will pass on to shrink_page_list().
+shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
+after shrink_active_list() had moved them to the inactive list, or pages mapped
+into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
+recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter,
+but will pass on to shrink_page_list().
shrink_page_list() again culls obviously unevictable pages that it could
encounter for similar reason to shrink_inactive_list(). Pages mapped into
-VM_LOCKED vmas but without PG_mlocked set will make it all the way to
+VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
try_to_unmap(). shrink_page_list() will divert them to the unevictable list
when try_to_unmap() returns SWAP_MLOCK, as discussed above.
Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical
pointer to single linked list of struct setup_data.
+Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
+ beyond the kernel_alignment added, new init_size and
+ pref_address fields. Added extended boot loader IDs.
+
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
021C/4 2.00+ ramdisk_size initrd size (set by boot loader)
0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only
0224/2 2.01+ heap_end_ptr Free memory after setup end
-0226/2 N/A pad1 Unused
+0226/1 2.02+(3 ext_loader_ver Extended boot loader version
+0227/1 2.02+(3 ext_loader_type Extended boot loader ID
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
022C/4 2.03+ ramdisk_max Highest legal initrd address
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
-0235/1 N/A pad2 Unused
+0235/1 2.10+ min_alignment Minimum alignment, as a power of two
0236/2 N/A pad3 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
024C/4 2.08+ payload_length Length of kernel payload
0250/8 2.09+ setup_data 64-bit physical pointer to linked list
of struct setup_data
+0258/8 2.10+ pref_address Preferred loading address
+0260/4 2.10+ init_size Linear memory required during initialization
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
field are unusable, which means the size of a bzImage kernel
cannot be determined.
+(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+
If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
the boot protocol version is "old". Loading an old kernel, the
following parameters should be assumed:
0xTV here, where T is an identifier for the boot loader and V is
a version number. Otherwise, enter 0xFF here.
+ For boot loader IDs above T = 0xD, write T = 0xE to this field and
+ write the extended ID minus 0x10 to the ext_loader_type field.
+ Similarly, the ext_loader_ver field can be used to provide more than
+ four bits for the bootloader version.
+
+ For example, for T = 0x15, V = 0x234, write:
+
+ type_of_loader <- 0xE4
+ ext_loader_type <- 0x05
+ ext_loader_ver <- 0x23
+
Assigned boot loader ids:
0 LILO (0x00 reserved for pre-2.00 bootloader)
1 Loadlin
2 bootsect-loader (0x20, all other values reserved)
- 3 SYSLINUX
- 4 EtherBoot
+ 3 Syslinux
+ 4 Etherboot/gPXE
5 ELILO
7 GRUB
- 8 U-BOOT
+ 8 U-Boot
9 Xen
A Gujin
B Qemu
+ C Arcturus Networks uCbootloader
+ E Extended (see ext_loader_type)
+ F Special (0xFF = undefined)
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
Set this field to the offset (from the beginning of the real-mode
code) of the end of the setup stack/heap, minus 0x0200.
+Field name: ext_loader_ver
+Type: write (optional)
+Offset/size: 0x226/1
+Protocol: 2.02+
+
+ This field is used as an extension of the version number in the
+ type_of_loader field. The total version number is considered to be
+ (type_of_loader & 0x0f) + (ext_loader_ver << 4).
+
+ The use of this field is boot loader specific. If not written, it
+ is zero.
+
+ Kernels prior to 2.6.31 did not recognize this field, but it is safe
+ to write for protocol version 2.02 or higher.
+
+Field name: ext_loader_type
+Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0)
+Offset/size: 0x227/1
+Protocol: 2.02+
+
+ This field is used as an extension of the type number in
+ type_of_loader field. If the type in type_of_loader is 0xE, then
+ the actual type is (ext_loader_type + 0x10).
+
+ This field is ignored if the type in type_of_loader is not 0xE.
+
+ Kernels prior to 2.6.31 did not recognize this field, but it is safe
+ to write for protocol version 2.02 or higher.
+
Field name: cmd_line_ptr
Type: write (obligatory)
Offset/size: 0x228/4
0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
Field name: kernel_alignment
-Type: read (reloc)
+Type: read/modify (reloc)
Offset/size: 0x230/4
-Protocol: 2.05+
+Protocol: 2.05+ (read), 2.10+ (modify)
+
+ Alignment unit required by the kernel (if relocatable_kernel is
+ true.) A relocatable kernel that is loaded at an alignment
+ incompatible with the value in this field will be realigned during
+ kernel initialization.
- Alignment unit required by the kernel (if relocatable_kernel is true.)
+ Starting with protocol version 2.10, this reflects the kernel
+ alignment preferred for optimal performance; it is possible for the
+ loader to modify this field to permit a lesser alignment. See the
+ min_alignment and pref_address field below.
Field name: relocatable_kernel
Type: read (reloc)
After loading, the boot loader must set the code32_start field to
point to the loaded code, or to a boot loader hook.
+Field name: min_alignment
+Type: read (reloc)
+Offset/size: 0x235/1
+Protocol: 2.10+
+
+ This field, if nonzero, indicates as a power of two the minimum
+ alignment required, as opposed to preferred, by the kernel to boot.
+ If a boot loader makes use of this field, it should update the
+ kernel_alignment field with the alignment unit desired; typically:
+
+ kernel_alignment = 1 << min_alignment
+
+ There may be a considerable performance cost with an excessively
+ misaligned kernel. Therefore, a loader should typically try each
+ power-of-two alignment from kernel_alignment down to this alignment.
+
Field name: cmdline_size
Type: read
Offset/size: 0x238/4
sure to consider the case where the linked list already contains
entries.
+Field name: pref_address
+Type: read (reloc)
+Offset/size: 0x258/8
+Protocol: 2.10+
+
+ This field, if nonzero, represents a preferred load address for the
+ kernel. A relocating bootloader should attempt to load at this
+ address if possible.
+
+ A non-relocatable kernel will unconditionally move itself and to run
+ at this address.
+
+Field name: init_size
+Type: read
+Offset/size: 0x25c/4
+
+ This field indicates the amount of linear contiguous memory starting
+ at the kernel runtime start address that the kernel needs before it
+ is capable of examining its memory map. This is not the same thing
+ as the total amount of memory the kernel needs to boot, but it can
+ be used by a relocating boot loader to help select a safe load
+ address for the kernel.
+
+ The kernel runtime start address is determined by the following algorithm:
+
+ if (relocatable_kernel)
+ runtime_start = align_up(load_address, kernel_alignment)
+ else
+ runtime_start = pref_address
+
**** THE IMAGE CHECKSUM
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and location. Type is one of: git, hg, quilt.
-F: Applicable files and/or directories
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
it has been replaced by a better system and you
should be using that.
+F: Files and directories with wildcard patterns.
+ A trailing slash includes all files and subdirectory files.
+ F: drivers/net/ all files in and below drivers/net
+ F: drivers/net/* all files in drivers/net, but not below
+ F: */net/* all files in "any top level directory"/net
+ One pattern per line. Multiple F: lines acceptable.
+X: Files and directories that are NOT maintained, same rules as F:
+ Files exclusions are tested before file matches.
+ Can be useful for excluding a specific subdirectory, for instance:
+ F: net/
+ X: net/ipv6/
+ matches all files in and below net excluding net/ipv6/
+
3C505 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/3c505*
3C59X NETWORK DRIVER
P: Steffen Klassert
M: klassert@mathematik.tu-chemnitz.de
L: netdev@vger.kernel.org
S: Maintained
+F: Documentation/networking/vortex.txt
+F: drivers/net/3c59x.c
3CR990 NETWORK DRIVER
P: David Dillow
M: dave@thedillows.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/typhoon*
3W-9XXX SATA-RAID CONTROLLER DRIVER
P: Adam Radford
L: linux-scsi@vger.kernel.org
W: http://www.amcc.com
S: Supported
+F: drivers/scsi/3w-9xxx*
3W-XXXX ATA-RAID CONTROLLER DRIVER
P: Adam Radford
L: linux-scsi@vger.kernel.org
W: http://www.amcc.com
S: Supported
+F: drivers/scsi/3w-xxxx*
53C700 AND 53C700-66 SCSI DRIVER
P: James E.J. Bottomley
M: James.Bottomley@HansenPartnership.com
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/53c700*
6PACK NETWORK DRIVER FOR AX.25
P: Andreas Koensgen
M: ajk@iehk.rwth-aachen.de
L: linux-hams@vger.kernel.org
S: Maintained
+F: drivers/net/hamradio/6pack.c
8169 10/100/1000 GIGABIT ETHERNET DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Orphan
+F: drivers/serial/8250*
+F: include/linux/serial_8250.h
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/*8390*
+F: drivers/net/ax88796.c
9P FILE SYSTEM
P: Eric Van Hensbergen
M: lucho@ionkov.net
L: v9fs-developer@lists.sourceforge.net
W: http://swik.net/v9fs
-T: git kernel.org:/pub/scm/linux/kernel/ericvh/v9fs.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
S: Maintained
+F: Documentation/filesystems/9p.txt
+F: fs/9p/
A2232 SERIAL BOARD DRIVER
P: Enver Haase
M: A2232@gmx.net
L: linux-m68k@lists.linux-m68k.org
S: Maintained
+F: drivers/char/ser_a2232*
AACRAID SCSI RAID DRIVER
P: Adaptec OEM Raid Solutions
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Supported
+F: Documentation/scsi/aacraid.txt
+F: drivers/scsi/aacraid/
ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
P: Hans de Goede
M: j.w.r.degoede@hhs.nl
L: lm-sensors@lm-sensors.org
S: Maintained
+F: drivers/hwmon/abituguru.c
ABIT UGURU 3 HARDWARE MONITOR DRIVER
P: Alistair John Strachan
M: alistair@devzero.co.uk
L: lm-sensors@lm-sensors.org
S: Maintained
+F: drivers/hwmon/abituguru3.c
ACENIC DRIVER
P: Jes Sorensen
M: jes@trained-monkey.org
L: linux-acenic@sunsite.dk
S: Maintained
+F: drivers/net/acenic*
ACER WMI LAPTOP EXTRAS
P: Carlos Corbacho
L: aceracpi@googlegroups.com (subscribers-only)
W: http://code.google.com/p/aceracpi
S: Maintained
+F: drivers/platform/x86/acer-wmi.c
ACPI
P: Len Brown
M: lenb@kernel.org
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
-T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Supported
+F: drivers/acpi/
+F: drivers/pnp/pnpacpi/
+F: include/linux/acpi.h
ACPI BATTERY DRIVERS
P: Alexey Starikovskiy
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
+F: drivers/acpi/battery.c
+F: drivers/acpi/*sbs*
ACPI EC DRIVER
P: Alexey Starikovskiy
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
+F: drivers/acpi/ec.c
ACPI FAN DRIVER
P: Zhang Rui
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
+F: drivers/acpi/fan.c
ACPI PCI HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: linux-pci@vger.kernel.org
S: Supported
+F: drivers/pci/hotplug/acpi*
ACPI THERMAL DRIVER
P: Zhang Rui
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
+F: drivers/acpi/*thermal*
ACPI VIDEO DRIVER
P: Zhang Rui
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
+F: drivers/acpi/video.c
ACPI WMI DRIVER
P: Carlos Corbacho
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Maintained
+F: drivers/platform/x86/wmi.c
AD1889 ALSA SOUND DRIVER
P: Kyle McMartin
W: http://wiki.parisc-linux.org/AD1889
L: linux-parisc@vger.kernel.org
S: Maintained
+F: sound/pci/ad1889.*
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/adm1025
+F: drivers/hwmon/adm1025.c
ADM1029 HARDWARE MONITOR DRIVER
P: Corentin Labbe
M: corentin.labbe@geomatys.fr
L: lm-sensors@lm-sensors.org
S: Maintained
+F: drivers/hwmon/adm1029.c
ADM8211 WIRELESS DRIVER
P: Michael Wu
M: flamingice@sourmilk.net
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
S: Maintained
+F: drivers/net/wireless/adm8211.*
ADT746X FAN DRIVER
P: Colin Leroy
M: colin@colino.net
S: Maintained
+F: drivers/macintosh/therm_adt746x.c
ADVANSYS SCSI DRIVER
P: Matthew Wilcox
M: matthew@wil.cx
L: linux-scsi@vger.kernel.org
S: Maintained
+F: Documentation/scsi/advansys.txt
+F: drivers/scsi/advansys.c
AEDSP16 DRIVER
P: Riccardo Facchetti
M: fizban@tin.it
S: Maintained
+F: sound/oss/aedsp16.c
AFFS FILE SYSTEM
P: Roman Zippel
M: zippel@linux-m68k.org
S: Maintained
+F: Documentation/filesystems/affs.txt
+F: fs/affs/
AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
P: David Howells
M: dhowells@redhat.com
L: linux-afs@lists.infradead.org
S: Supported
+F: fs/afs/
+F: include/net/af_rxrpc.h
+F: net/rxrpc/af_rxrpc.c
AGPGART DRIVER
P: David Airlie
M: airlied@linux.ie
-T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
+F: drivers/char/agp/
+F: include/linux/agp*
AHA152X SCSI DRIVER
P: Juergen E. Fischer
-M: Juergen Fischer <fischer@norbit.de>
+M: fischer@norbit.de
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/aha152x*
+F: drivers/scsi/pcmcia/aha152x*
AIC7XXX / AIC79XX SCSI DRIVER
P: Hannes Reinecke
M: hare@suse.de
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/aic7xxx/
+F: drivers/scsi/aic7xxx_old/
AIO
P: Benjamin LaHaise
M: bcrl@kvack.org
L: linux-aio@kvack.org
S: Supported
+F: fs/aio.c
+F: include/linux/*aio*.h
ALCATEL SPEEDTOUCH USB DRIVER
P: Duncan Sands
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
+F: drivers/usb/atm/speedtch.c
+F: drivers/usb/atm/usbatm.c
ALCHEMY AU1XX0 MMC DRIVER
P: Manuel Lauss
M: manuel.lauss@gmail.com
S: Maintained
+F: drivers/mmc/host/au1xmmc.c
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
L: linux-i2c@vger.kernel.org
S: Maintained
+F: Documentation/i2c/busses/i2c-ali1563
+F: drivers/i2c/busses/i2c-ali1563.c
ALPHA PORT
P: Richard Henderson
M: ink@jurassic.park.msu.ru
S: Maintained for 2.4; PCI support for 2.6.
L: linux-alpha@vger.kernel.org
+F: arch/alpha/
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
-M: thomas.dahlmann@amd.com
+M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
+F: drivers/usb/gadget/amd5536udc.*
AMD GEODE PROCESSOR/CHIPSET SUPPORT
P: Jordan Crouse
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
+F: arch/x86/kernel/geode_32.c
+F: drivers/char/hw_random/geode-rng.c
+F: drivers/crypto/geode*
+F: drivers/video/geode/
+F: arch/x86/include/asm/geode.h
AMD IOMMU (AMD-VI)
P: Joerg Roedel
M: joerg.roedel@amd.com
L: iommu@lists.linux-foundation.org
-T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
S: Supported
+F: arch/x86/kernel/amd_iommu*.c
+F: arch/x86/include/asm/amd_iommu*.h
AMD MICROCODE UPDATE SUPPORT
-P: Andreas Herrmann
-M: andeas.herrmann3@amd.com
-L: amd64-microcode@amd64.org
-S: Supported
+P: Andreas Herrmann
+M: andreas.herrmann3@amd.com
+L: amd64-microcode@amd64.org
+S: Supported
+F: arch/x86/kernel/microcode_amd.c
AMS (Apple Motion Sensor) DRIVER
P: Stelian Pop
P: Michael Hanselmann
M: linux-kernel@hansmi.ch
S: Supported
+F: drivers/hwmon/ams/
AMSO1100 RNIC DRIVER
P: Tom Tucker
M: swise@opengridcomputing.com
L: general@lists.openfabrics.org
S: Maintained
+F: drivers/infiniband/hw/amso1100/
AOA (Apple Onboard Audio) ALSA DRIVER
P: Johannes Berg
L: linuxppc-dev@ozlabs.org
L: alsa-devel@alsa-project.org (subscribers-only)
S: Maintained
+F: sound/aoa/
APM DRIVER
P: Stephen Rothwell
L: linux-laptop@vger.kernel.org
W: http://www.canb.auug.org.au/~sfr/
S: Supported
+F: arch/x86/kernel/apm_32.c
+F: include/linux/apm_bios.h
APPLE BCM5974 MULTITOUCH DRIVER
P: Henrik Rydberg
M: rydberg@euromail.se
L: linux-input@vger.kernel.org
S: Maintained
+F: drivers/input/mouse/bcm5974.c
APPLE SMC DRIVER
P: Nicolas Boichat
M: nicolas@boichat.ch
L: mactel-linux-devel@lists.sourceforge.net
S: Maintained
+F: drivers/hwmon/applesmc.c
APPLETALK NETWORK LAYER
P: Arnaldo Carvalho de Melo
M: acme@ghostprotocols.net
S: Maintained
+F: drivers/net/appletalk/
+F: net/appletalk/
APPLETOUCH TOUCHPAD DRIVER
P: Johannes Berg
M: johannes@sipsolutions.net
L: linux-input@vger.kernel.org
S: Maintained
+F: Documentation/input/appletouch.txt
+F: drivers/input/mouse/appletouch.c
ARC FRAMEBUFFER DRIVER
P: Jaya Kumar
M: jayalk@intworks.biz
S: Maintained
+F: drivers/video/arcfb.c
+F: drivers/video/fb_defio.c
ARM MFM AND FLOPPY DRIVERS
P: Ian Molton
M: spyro@f2s.com
S: Maintained
+F: arch/arm/lib/floppydma.S
+F: arch/arm/include/asm/floppy.h
+
+ARM PORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/
ARM PRIMECELL MMCI PL180/1 DRIVER
S: Orphan
+F: drivers/mmc/host/mmci.*
ARM/ADI ROADRUNNER MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mach-ixp23xx/
+F: arch/arm/mach-ixp23xx/include/mach/
ARM/ADS SPHERE MACHINE SUPPORT
P: Lennert Buytenhek
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/CLKDEV SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+F: arch/arm/common/clkdev.c
+F: arch/arm/include/asm/clkdev.h
+
ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
P: Paulius Zaleckas
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-T: git gitorious.org/linux-gemini/mainline.git
+T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
+F: arch/arm/mach-gemini/
+
+ARM/EBSA110 MACHINE SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/mach-ebsa110/
+F: drivers/net/arm/am79c961a.*
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mm/*-fa*
+
+ARM/FOOTBRIDGE ARCHITECTURE
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/include/asm/hardware/dec21285.h
+F: arch/arm/mach-footbridge/
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
P: Sascha Hauer
M: dirk@opfer-online.de
S: Maintained
-ARM/PALMTX,PALMT5,PALMLD SUPPORT
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
P: Marek Vasut
M: marek.vasut@gmail.com
W: http://hackndev.com
S: Maintained
ARM/PALMZ72 SUPPORT
-P: Sergey Lapin
-M: slapin@ossfans.org
-W: http://hackndev.com
-S: Maintained
+P: Sergey Lapin
+M: slapin@ossfans.org
+W: http://hackndev.com
+S: Maintained
ARM/PLEB SUPPORT
P: Peter Chubb
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/RISCPC ARCHITECTURE
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/common/time-acorn.c
+F: arch/arm/include/asm/hardware/entry-macro-iomd.S
+F: arch/arm/include/asm/hardware/ioc.h
+F: arch/arm/include/asm/hardware/iomd.h
+F: arch/arm/include/asm/hardware/memc.h
+F: arch/arm/mach-rpc/
+F: drivers/net/arm/ether*
+F: drivers/scsi/arm/
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
M: alex@shark-linux.de
W: http://www.shark-linux.de/shark.html
S: Maintained
-ARM/STRONGARM110 PORT
-P: Russell King
-M: rmk@arm.linux.org.uk
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://www.arm.linux.org.uk/
-S: Maintained
-
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
S: Maintained
ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P: Wan ZongShun
-M: mcuos.com@gmail.com
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://www.mcuos.com
-S: Maintained
+P: Wan ZongShun
+M: mcuos.com@gmail.com
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.mcuos.com
+S: Maintained
+
+ARM/VFP SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/vfp/
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
S: Maintained
+F: net/ipv4/arp.c
ASUS ACPI EXTRAS DRIVER
P: Corentin Chary
W: http://sourceforge.net/projects/acpi4asus
W: http://xf.iksaif.net/acpi4asus
S: Maintained
+F: arch/x86/kernel/acpi/boot.c
+F: drivers/platform/x86/asus_acpi.c
ASUS ASB100 HARDWARE MONITOR DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
L: lm-sensors@lm-sensors.org
S: Maintained
+F: drivers/hwmon/asb100.c
ASUS LAPTOP EXTRAS DRIVER
P: Corentin Chary
W: http://sourceforge.net/projects/acpi4asus
W: http://xf.iksaif.net/acpi4asus
S: Maintained
+F: drivers/platform/x86/asus-laptop.c
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
P: Dan Williams
L: linux-kernel@vger.kernel.org
W: http://sourceforge.net/projects/xscaleiop
S: Supported
+F: Documentation/crypto/async-tx-api.txt
+F: crypto/async_tx/
+F: drivers/dma/
+F: include/linux/dmaengine.h
+F: include/linux/async_tx.h
ATA OVER ETHERNET (AOE) DRIVER
P: Ed L. Cashin
M: ecashin@coraid.com
W: http://www.coraid.com/support/linux
S: Supported
+F: Documentation/aoe/
+F: drivers/block/aoe/
ATHEROS ATH5K WIRELESS DRIVER
P: Jiri Slaby
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
S: Maintained
+F: drivers/net/wireless/ath5k/
ATHEROS ATH9K WIRELESS DRIVER
P: Luis R. Rodriguez
L: linux-wireless@vger.kernel.org
L: ath9k-devel@lists.ath9k.org
S: Supported
+F: drivers/net/wireless/ath9k/
ATHEROS AR9170 WIRELESS DRIVER
P: Christian Lamparter
P: Ville Syrjala
M: syrjala@sci.fi
S: Maintained
+F: drivers/input/misc/ati_remote2.c
ATLX ETHERNET DRIVERS
P: Jay Cliburn
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
S: Maintained
+F: drivers/net/atlx/
ATM
P: Chas Williams
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
S: Maintained
+F: drivers/atm/
+F: include/linux/atm*
ATMEL AT91 MCI DRIVER
P: Nicolas Ferre
W: http://www.atmel.com/products/AT91/
W: http://www.at91.com/
S: Maintained
+F: drivers/mmc/host/at91_mci.c
ATMEL AT91 / AT32 SERIAL DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
L: linux-kernel@vger.kernel.org
S: Supported
+F: drivers/serial/atmel_serial.c
ATMEL LCDFB DRIVER
P: Nicolas Ferre
M: nicolas.ferre@atmel.com
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/atmel_lcdfb.c
+F: include/video/atmel_lcdc.h
ATMEL MACB ETHERNET DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
+F: drivers/net/macb.*
ATMEL SPI DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
+F: drivers/spi/atmel_spi.*
ATMEL USBA UDC DRIVER
P: Haavard Skinnemoen
L: kernel@avr32linux.org
W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
S: Supported
+F: drivers/usb/gadget/atmel_usba_udc.*
ATMEL WIRELESS DRIVER
P: Simon Kelley
W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
+F: drivers/net/wireless/atmel*
AUDIT SUBSYSTEM
P: Al Viro
M: eparis@redhat.com
L: linux-audit@redhat.com (subscribers-only)
W: http://people.redhat.com/sgrubb/audit/
-T: git git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
S: Maintained
+F: include/linux/audit.h
+F: kernel/audit*
AUXILIARY DISPLAY DRIVERS
P: Miguel Ojeda Sandonis
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
+F: drivers/auxdisplay/
+F: include/linux/cfag12864b.h
AVR32 ARCHITECTURE
P: Haavard Skinnemoen
W: http://avr32linux.org/
W: http://avrfreaks.net/
S: Supported
+F: arch/avr32/
AVR32/AT32AP MACHINE SUPPORT
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
+F: arch/avr32/mach-at32ap/
AX.25 NETWORK LAYER
P: Ralf Baechle
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
+F: include/linux/ax25.h
+F: include/net/ax25.h
+F: net/ax25/
B43 WIRELESS DRIVER
P: Michael Buesch
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
+F: drivers/net/wireless/b43/
B43LEGACY WIRELESS DRIVER
P: Larry Finger
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
+F: drivers/net/wireless/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
+F: drivers/video/backlight/
+F: include/linux/backlight.h
BAYCOM/HDLCDRV DRIVERS FOR AX.25
P: Thomas Sailer
L: linux-hams@vger.kernel.org
W: http://www.baycom.org/~tom/ham/ham.html
S: Maintained
+F: drivers/net/hamradio/baycom*
BEFS FILE SYSTEM
P: Sergey S. Kostyliov
M: rathamahata@php4.ru
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/befs.txt
+F: fs/befs/
BFS FILE SYSTEM
P: Tigran A. Aivazian
M: tigran@aivazian.fsnet.co.uk
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/bfs.txt
+F: fs/bfs/
+F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Bryan Wu
-M: cooloney@kernel.org
+P: Mike Frysinger
+M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
+F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Bryan Wu
-M: cooloney@kernel.org
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P: Michael Hennerich
+M: michael.hennerich@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
+F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
+F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
+F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
+F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
+F: drivers/i2c/busses/i2c-bfin-twi.c
BLOCK LAYER
P: Jens Axboe
M: axboe@kernel.dk
L: linux-kernel@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
S: Maintained
+F: block/
BLOCK2MTD DRIVER
P: Joern Engel
M: joern@lazybastard.org
L: linux-mtd@lists.infradead.org
S: Maintained
+F: drivers/mtd/devices/block2mtd.c
BLUETOOTH DRIVERS
P: Marcel Holtmann
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
S: Maintained
+F: drivers/bluetooth/
BLUETOOTH SUBSYSTEM
P: Marcel Holtmann
M: marcel@holtmann.org
L: linux-bluetooth@vger.kernel.org
W: http://www.bluez.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
S: Maintained
+F: net/bluetooth/
+F: include/net/bluetooth/
BONDING DRIVER
P: Jay Vosburgh
L: bonding-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/bonding/
S: Supported
+F: drivers/net/bonding/
+F: include/linux/if_bonding.h
BROADCOM B44 10/100 ETHERNET DRIVER
P: Gary Zambrano
M: zambrano@broadcom.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER
P: Michael Chan
M: mchan@broadcom.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/bnx2.*
+F: drivers/net/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
P: Eilon Greenstein
M: eilong@broadcom.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/bnx2x*
BROADCOM TG3 GIGABIT ETHERNET DRIVER
P: Matt Carlson
M: mchan@broadcom.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/tg3.*
BSG (block layer generic sg v4 driver)
P: FUJITA Tomonori
M: fujita.tomonori@lab.ntt.co.jp
L: linux-scsi@vger.kernel.org
S: Supported
+F: block/bsg.c
+F: include/linux/bsg.h
BT8XXGPIO DRIVER
P: Michael Buesch
M: mb@bu3sch.de
W: http://bu3sch.de/btgpio.php
S: Maintained
+F: drivers/gpio/bt8xxgpio.c
BTRFS FILE SYSTEM
P: Chris Mason
M: chris.mason@oracle.com
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
S: Maintained
+F: Documentation/filesystems/btrfs.txt
+F: fs/btrfs/
BTTV VIDEO4LINUX DRIVER
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
L: linux-media@vger.kernel.org
W: http://linuxtv.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: Documentation/video4linux/bttv/
+F: drivers/media/video/bt8xx/bttv*
+
+CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
+P: David Howells
+M: dhowells@redhat.com
+L: linux-cachefs@redhat.com
+S: Supported
+F: Documentation/filesystems/caching/cachefiles.txt
+F: fs/cachefiles/
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
P: Jonathan Corbet
M: corbet@lwn.net
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: Documentation/video4linux/cafe_ccic
+F: drivers/media/video/cafe_ccic*
CALGARY x86-64 IOMMU
P: Muli Ben-Yehuda
L: linux-kernel@vger.kernel.org
L: discuss@x86-64.org
S: Maintained
+F: arch/x86/kernel/pci-calgary_64.c
+F: arch/x86/kernel/tce_64.c
+F: arch/x86/include/asm/calgary.h
+F: arch/x86/include/asm/tce.h
CAN NETWORK LAYER
P: Urs Thuermann
L: socketcan-core@lists.berlios.de (subscribers-only)
W: http://developer.berlios.de/projects/socketcan/
S: Maintained
+F: drivers/net/can/
+F: include/linux/can/
+F: include/linux/can.h
CELL BROADBAND ENGINE ARCHITECTURE
P: Arnd Bergmann
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
+F: arch/powerpc/include/asm/cell*.h
+F: arch/powerpc/include/asm/spu*.h
+F: arch/powerpc/oprofile/*cell*
+F: arch/powerpc/platforms/cell/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
P: David Vrabel
M: david.vrabel@csr.com
L: linux-usb@vger.kernel.org
S: Supported
+F: Documentation/usb/WUSB-Design-overview.txt
+F: Documentation/usb/wusb-cbaf
+F: drivers/usb/wusbcore/
+F: include/linux/usb/wusb*
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
+F: drivers/auxdisplay/cfag12864b.c
+F: include/linux/cfag12864b.h
CFAG12864BFB LCD FRAMEBUFFER DRIVER
P: Miguel Ojeda Sandonis
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
+F: drivers/auxdisplay/cfag12864bfb.c
+F: include/linux/cfag12864b.h
CFG80211 and NL80211
P: Johannes Berg
M: johannes@sipsolutions.net
L: linux-wireless@vger.kernel.org
S: Maintained
+F: include/linux/nl80211.h
+F: include/net/cfg80211.h
+F: net/wireless/*
+X: net/wireless/wext*
CHECKPATCH
P: Andy Whitcroft
M: apw@canonical.com
L: linux-kernel@vger.kernel.org
S: Supported
+F: scripts/checkpatch.pl
CISCO 10G ETHERNET DRIVER
P: Scott Feldman
P: Joe Eykholt
M: jeykholt@cisco.com
S: Supported
+F: drivers/net/enic/
CIRRUS LOGIC EP93XX ETHERNET DRIVER
P: Lennert Buytenhek
M: kernel@wantstofly.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/arm/ep93xx_eth.c
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
P: Lennert Buytenhek
M: kernel@wantstofly.org
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/host/ohci-ep93xx.c
CIRRUS LOGIC CS4270 SOUND DRIVER
P: Timur Tabi
M: timur@freescale.com
L: alsa-devel@alsa-project.org
S: Supported
+F: sound/soc/codecs/cs4270*
CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
P: Cirrus Logic Corporation (kernel 2.2 driver)
P: Nils Faerber (port to kernel 2.4)
M: Nils Faerber <nils@kernelconcepts.de>
S: Maintained
+F: Documentation/input/cs461x.txt
+F: sound/pci/cs46xx/
+
+CLK API
+P: Russell King
+M: linux@arm.linux.org.uk
+F: include/linux/clk.h
+
+CISCO FCOE HBA DRIVER
+P: Abhijeet Joglekar
+M: abjoglek@cisco.com
+P: Joe Eykholt
+M: jeykholt@cisco.com
+L: linux-scsi@vger.kernel.org
+S: Supported
CODA FILE SYSTEM
P: Jan Harkes
L: codalist@coda.cs.cmu.edu
W: http://www.coda.cs.cmu.edu/
S: Maintained
+F: Documentation/filesystems/coda.txt
+F: fs/coda/
+F: include/linux/coda*.h
COMMON INTERNET FILE SYSTEM (CIFS)
P: Steve French
L: linux-cifs-client@lists.samba.org
L: samba-technical@lists.samba.org
W: http://linux-cifs.samba.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git
S: Supported
+F: Documentation/filesystems/cifs.txt
+F: fs/cifs/
COMPACTPCI HOTPLUG CORE
P: Scott Murray
M: scott@spiteful.org
L: linux-pci@vger.kernel.org
S: Supported
+F: drivers/pci/hotplug/cpci_hotplug*
COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
P: Scott Murray
M: scott@spiteful.org
L: linux-pci@vger.kernel.org
S: Supported
+F: drivers/pci/hotplug/cpcihp_zt5550.*
COMPACTPCI HOTPLUG GENERIC DRIVER
P: Scott Murray
M: scott@spiteful.org
L: linux-pci@vger.kernel.org
S: Supported
+F: drivers/pci/hotplug/cpcihp_generic.c
COMPAL LAPTOP SUPPORT
P: Cezary Jackiewicz
M: cezary.jackiewicz@gmail.com
S: Maintained
+F: drivers/platform/x86/compal-laptop.c
COMPUTONE INTELLIPORT MULTIPORT CARD
P: Michael H. Warfield
M: mhw@wittsend.com
W: http://www.wittsend.com/computone.html
S: Maintained
+F: Documentation/serial/computone.txt
+F: drivers/char/ip2/
CONEXANT ACCESSRUNNER USB DRIVER
P: Simon Arlott
L: accessrunner-general@lists.sourceforge.net
W: http://accessrunner.sourceforge.net/
S: Maintained
+F: drivers/usb/atm/cxacru.c
CONFIGFS
P: Joel Becker
M: joel.becker@oracle.com
L: linux-kernel@vger.kernel.org
S: Supported
+F: fs/configfs/
+F: include/linux/configfs.h
CONTROL GROUPS (CGROUPS)
P: Paul Menage
M: lizf@cn.fujitsu.com
L: containers@lists.linux-foundation.org
S: Maintained
+F: include/linux/cgroup*
+F: kernel/cgroup*
CORETEMP HARDWARE MONITORING DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/coretemp
+F: drivers/hwmon/coretemp.c
COSA/SRP SYNC SERIAL DRIVER
P: Jan "Yenya" Kasprzak
M: kas@fi.muni.cz
W: http://www.fi.muni.cz/~kas/cosa/
S: Maintained
+F: drivers/net/wan/cosa*
+
+CPMAC ETHERNET DRIVER
+P: Florian Fainelli
+M: florian@openwrt.org
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/cpmac.c
CPU FREQUENCY DRIVERS
P: Dave Jones
M: davej@redhat.com
L: cpufreq@vger.kernel.org
W: http://www.codemonkey.org.uk/projects/cpufreq/
-T: git kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
S: Maintained
+F: arch/x86/kernel/cpu/cpufreq/
+F: drivers/cpufreq/
+F: include/linux/cpufreq.h
CPUID/MSR DRIVER
P: H. Peter Anvin
M: hpa@zytor.com
S: Maintained
+F: arch/x86/kernel/cpuid.c
+F: arch/x86/kernel/msr.c
CPUSETS
P: Paul Menage
W: http://www.bullopensource.org/cpuset/
W: http://oss.sgi.com/projects/cpusets/
S: Supported
+F: Documentation/cgroups/cpusets.txt
+F: include/linux/cpuset.h
+F: kernel/cpuset.c
CRAMFS FILESYSTEM
W: http://sourceforge.net/projects/cramfs/
S: Orphan
+F: Documentation/filesystems/cramfs.txt
+F: fs/cramfs/
CRIS PORT
P: Mikael Starvik
L: dev-etrax@axis.com
W: http://developer.axis.com
S: Maintained
+F: arch/cris/
CRYPTO API
P: Herbert Xu
P: David S. Miller
M: davem@davemloft.net
L: linux-crypto@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
S: Maintained
+F: Documentation/crypto/
+F: arch/*/crypto/
+F: crypto/
+F: drivers/crypto/
+F: include/crypto/
CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
P: Neil Horman
P: Jaya Kumar
M: jayakumar.alsa@gmail.com
S: Maintained
+F: sound/pci/cs5535audio/
CX18 VIDEO4LINUX DRIVER
-P: Hans Verkuil, Andy Walls
-M: hverkuil@xs4all.nl, awalls@radix.net
+P: Hans Verkuil
+M: hverkuil@xs4all.nl
+P: Andy Walls
+M: awalls@radix.net
L: ivtv-devel@ivtvdriver.org
L: ivtv-users@ivtvdriver.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linuxtv.org
S: Maintained
+F: Documentation/video4linux/cx18.txt
+F: drivers/media/video/cx18/
CXGB3 ETHERNET DRIVER (CXGB3)
P: Divy Le Ray
L: netdev@vger.kernel.org
W: http://www.chelsio.com
S: Supported
+F: drivers/net/cxgb3/
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
P: Steve Wise
L: general@lists.openfabrics.org
W: http://www.openfabrics.org
S: Supported
+F: drivers/infiniband/hw/cxgb3/
CYBERPRO FB DRIVER
P: Russell King
-M: rmk@arm.linux.org.uk
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
-
-CYBLAFB FRAMEBUFFER DRIVER
-P: Knut Petersen
-M: Knut_Petersen@t-online.de
-L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
-S: Maintained
+F: drivers/video/cyber2000fb.*
CYCLADES 2X SYNC CARD DRIVER
P: Arnaldo Carvalho de Melo
M: acme@ghostprotocols.net
W: http://oops.ghostprotocols.net:81/blog
S: Maintained
+F: drivers/net/wan/cycx*
CYCLADES ASYNC MUX DRIVER
W: http://www.cyclades.com/
S: Orphan
+F: drivers/char/cyclades.c
+F: include/linux/cyclades.h
CYCLADES PC300 DRIVER
W: http://www.cyclades.com/
S: Orphan
+F: drivers/net/wan/pc300*
DAMA SLAVE for AX.25
P: Joerg Reuter
W: http://www.qsl.net/dl1bke/
L: linux-hams@vger.kernel.org
S: Maintained
+F: net/ax25/af_ax25.c
+F: net/ax25/ax25_dev.c
+F: net/ax25/ax25_ds_*
+F: net/ax25/ax25_in.c
+F: net/ax25/ax25_out.c
+F: net/ax25/ax25_timer.c
+F: net/ax25/sysctl_net_ax25.c
DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
P: Tobias Ringstrom
M: tori@unhappy.mine.nu
L: netdev@vger.kernel.org
S: Maintained
+F: Documentation/networking/dmfe.txt
+F: drivers/net/tulip/dmfe.c
DC390/AM53C974 SCSI driver
P: Kurt Garloff
P: Guennadi Liakhovetski
M: g.liakhovetski@gmx.de
S: Maintained
+F: drivers/scsi/tmscsim.*
DC395x SCSI driver
P: Oliver Neukum
L: dc395x@twibble.org
L: http://lists.twibble.org/mailman/listinfo/dc395x/
S: Maintained
+F: Documentation/scsi/dc395x.txt
+F: drivers/scsi/dc395x.*
DCCP PROTOCOL
P: Arnaldo Carvalho de Melo
L: dccp@vger.kernel.org
W: http://linux-net.osdl.org/index.php/DCCP
S: Maintained
+F: include/linux/dccp.h
+F: include/linux/tfrc.h
+F: net/dccp/
DECnet NETWORK LAYER
P: Christine Caulfield
W: http://linux-decnet.sourceforge.net
L: linux-decnet-user@lists.sourceforge.net
S: Maintained
+F: Documentation/networking/decnet.txt
+F: net/decnet/
DEFXX FDDI NETWORK DRIVER
P: Maciej W. Rozycki
M: macro@linux-mips.org
S: Maintained
+F: drivers/net/defxx.*
DELL LAPTOP DRIVER
P: Matthew Garrett
M: mjg59@srcf.ucam.org
S: Maintained
+F: drivers/platform/x86/dell-laptop.c
DELL LAPTOP SMM DRIVER
P: Massimo Dal Zotto
M: dz@debian.org
W: http://www.debian.org/~dz/i8k/
S: Maintained
+F: drivers/char/i8k.c
+F: include/linux/i8k.h
DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
P: Doug Warzecha
M: Douglas_Warzecha@dell.com
S: Maintained
+F: Documentation/dcdbas.txt
+F: drivers/firmware/dcdbas.*
DELL WMI EXTRAS DRIVER
P: Matthew Garrett
L: dm-devel@redhat.com
W: http://sources.redhat.com/dm
S: Maintained
+F: Documentation/device-mapper/
+F: drivers/md/dm*
+F: include/linux/device-mapper.h
+F: include/linux/dm-*.h
DIGI INTL. EPCA DRIVER
P: Digi International, Inc
L: Eng.Linux@digi.com
W: http://www.digi.com
S: Orphan
+F: Documentation/serial/digiepca.txt
+F: drivers/char/epca*
+F: drivers/char/digi*
DIRECTORY NOTIFICATION (DNOTIFY)
P: Stephen Rothwell
M: sfr@canb.auug.org.au
L: linux-kernel@vger.kernel.org
S: Supported
+F: Documentation/filesystems/dnotify.txt
+F: fs/notify/dnotify/
+F: include/linux/dnotify.h
DISK GEOMETRY AND PARTITION HANDLING
P: Andries Brouwer
M: jack@suse.cz
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/quota.txt
+F: fs/quota/
+F: include/linux/quota*.h
DISTRIBUTED LOCK MANAGER (DLM)
P: Christine Caulfield
M: teigland@redhat.com
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
-T: git kernel.org:/pub/scm/linux/kernel/git/teigland/dlm.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
S: Supported
+F: fs/dlm/
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
P: Maciej Sosnowski
M: dan.j.williams@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
+F: drivers/dma/
+F: include/linux/dma*
DME1737 HARDWARE MONITOR DRIVER
P: Juerg Haefliger
M: juergh@gmail.com
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/dme1737
+F: drivers/hwmon/dme1737.c
DOCBOOK FOR DOCUMENTATION
P: Randy Dunlap
M: shaohua.li@intel.com
L: linux-acpi@vger.kernel.org
S: Supported
+F: drivers/acpi/dock.c
-DOCUMENTATION (/Documentation directory)
+DOCUMENTATION
P: Randy Dunlap
M: rdunlap@xenotime.net
L: linux-doc@vger.kernel.org
S: Maintained
+F: Documentation/
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
L: blinux-list@redhat.com
S: Maintained
+F: drivers/char/dtlk.c
+F: include/linux/dtlk.h
DPT_I2O SCSI RAID DRIVER
P: Adaptec OEM Raid Solutions
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Maintained
+F: drivers/scsi/dpt*
+F: drivers/scsi/dpt/
DRIVER CORE, KOBJECTS, AND SYSFS
P: Greg Kroah-Hartman
L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
+F: Documentation/kobject.txt
+F: drivers/base/
+F: fs/sysfs/
+F: include/linux/kobj*
+F: lib/kobj*
DRM DRIVERS
P: David Airlie
M: airlied@linux.ie
L: dri-devel@lists.sourceforge.net
-T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
+F: drivers/gpu/drm/
DSCC4 DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
-
-DVB SUBSYSTEM AND DRIVERS
-P: LinuxTV.org Project
-M: linux-media@vger.kernel.org
-W: http://linuxtv.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
-S: Maintained
+F: drivers/net/wan/dscc4.c
DZ DECSTATION DZ11 SERIAL DRIVER
P: Maciej W. Rozycki
M: macro@linux-mips.org
S: Maintained
+F: drivers/serial/dz.*
EATA-DMA SCSI DRIVER
P: Michael Neuffer
-L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org
+M: mike@i-Connect.Net
+L: linux-eata@i-connect.net
+L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/eata*
EATA ISA/EISA/PCI SCSI DRIVER
P: Dario Ballabio
M: ballabio_dario@emc.com
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/eata.c
EATA-PIO SCSI DRIVER
P: Michael Neuffer
M: mike@i-Connect.Net
-L: linux-eata@i-connect.net, linux-scsi@vger.kernel.org
+L: linux-eata@i-connect.net
+L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/eata_pio.*
EBTABLES
P: Bart De Schuymer
L: ebtables-devel@lists.sourceforge.net
W: http://ebtables.sourceforge.net/
S: Maintained
+F: include/linux/netfilter_bridge/ebt_*.h
+F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
-P: Tyler Hicks, Dustin Kirkland
-M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+P: Tyler Hicks
+M: tyhicks@linux.vnet.ibm.com
+M: Dustin Kirkland
+P: kirkland@canonical.com
L: ecryptfs-devel@lists.launchpad.net
W: https://launchpad.net/ecryptfs
S: Supported
+F: Documentation/filesystems/ecryptfs.txt
+F: fs/ecryptfs/
EDAC-CORE
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
+F: Documentation/edac.txt
+F: drivers/edac/edac_*
+F: include/linux/edac.h
EDAC-E752X
P: Mark Gross
-P: Doug Thompson
M: mark.gross@intel.com
+P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/e752x_edac.c
EDAC-E7XXX
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/e7xxx_edac.c
EDAC-I82443BXGX
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/i82443bxgx_edac.c
EDAC-I3000
P: Jason Uhlenkott
M: juhlenko@akamai.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/i3000_edac.c
EDAC-I5000
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/i5000_edac.c
EDAC-I5400
P: Mauro Carvalho Chehab
M: mchehab@redhat.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/i5400_edac.c
EDAC-I82975X
P: Ranganathan Desikan
P: Arvind R.
M: rdesikan@jetzbroadband.com
M: arvind@acarlab.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/i82975x_edac.c
EDAC-PASEMI
P: Egor Martovetsky
M: egor@pasemi.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/pasemi_edac.c
EDAC-R82600
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
+F: drivers/edac/r82600_edac.c
EEEPC LAPTOP EXTRAS DRIVER
P: Corentin Chary
L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
S: Maintained
+F: drivers/platform/x86/eeepc-laptop.c
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
+F: fs/efs/
EHCA (IBM GX bus InfiniBand adapter) DRIVER
P: Hoang-Nam Nguyen
M: raisch@de.ibm.com
L: general@lists.openfabrics.org
S: Supported
+F: drivers/infiniband/hw/ehca/
EMBEDDED LINUX
P: Paul Gortmaker
M: paul.gortmaker@windriver.com
+P: Matt Mackall
+M: mpm@selenic.com
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-embedded@vger.kernel.org
L: linux-scsi@vger.kernel.org
W: http://sourceforge.net/projects/lpfcxxxx
S: Supported
+F: drivers/scsi/lpfc/
EPSON 1355 FRAMEBUFFER DRIVER
P: Christopher Hoover
-M: ch@murgatroid.com, ch@hpl.hp.com
+M: ch@murgatroid.com
+P: Christopher Hoover
+M: ch@hpl.hp.com
S: Maintained
+F: drivers/video/epson1355fb.c
EPSON S1D13XXX FRAMEBUFFER DRIVER
P: Kristoffer Ericson
M: kristoffer.ericson@gmail.com
S: Maintained
+F: drivers/video/s1d13xxxfb.c
+F: include/video/s1d13xxxfb.h
ETHEREXPRESS-16 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/eexpress.*
ETHERNET BRIDGE
P: Stephen Hemminger
L: bridge@lists.linux-foundation.org
W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
+F: include/linux/netfilter_bridge/
+F: net/bridge/
ETHERTEAM 16I DRIVER
P: Mika Kuoppala
M: miku@iki.fi
S: Maintained
+F: drivers/net/eth16i.c
EXT2 FILE SYSTEM
L: linux-ext4@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/ext2.txt
+F: fs/ext2/
+F: include/linux/ext2*
EXT3 FILE SYSTEM
-P: Stephen Tweedie, Andrew Morton
-M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com
+P: Stephen Tweedie
+M: sct@redhat.com
+P: Andrew Morton
+M: akpm@linux-foundation.org
+P: Andreas Dilger
+M: adilger@sun.com
L: linux-ext4@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/ext3.txt
+F: fs/ext3/
+F: include/linux/ext3*
EXT4 FILE SYSTEM
P: Theodore Ts'o
-M: tytso@mit.edu, adilger@sun.com
+M: tytso@mit.edu
+P: Andreas Dilger
+M: adilger@sun.com
L: linux-ext4@vger.kernel.org
W: http://ext4.wiki.kernel.org
S: Maintained
+F: Documentation/filesystems/ext4.txt
+F: fs/ext4/
F71805F HARDWARE MONITORING DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/f71805f
+F: drivers/hwmon/f71805f.c
FARSYNC SYNCHRONOUS DRIVER
P: Kevin Curtis
M: kevin.curtis@farsite.co.uk
W: http://www.farsite.co.uk/
S: Supported
+F: drivers/net/wan/farsync.*
FAULT INJECTION SUPPORT
P: Akinobu Mita
M: akinobu.mita@gmail.com
S: Supported
+F: Documentation/fault-injection/
+F: lib/fault-inject.c
FILE LOCKING (flock() and fcntl()/lockf())
P: Matthew Wilcox
M: matthew@wil.cx
L: linux-fsdevel@vger.kernel.org
S: Maintained
+F: include/linux/fcntl.h
+F: include/linux/fs.h
+F: fs/fcntl.c
+F: fs/locks.c
FILESYSTEMS (VFS and infrastructure)
P: Alexander Viro
M: viro@zeniv.linux.org.uk
L: linux-fsdevel@vger.kernel.org
S: Maintained
+F: fs/*
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
P: Riku Voipio
M: riku.vipio@iki.fi
L: lm-sensors@lm-sensors.org
S: Maintained
+F: drivers/hwmon/f75375s.c
+F: include/linux/f75375s.h
-FIREWIRE SUBSYSTEM (drivers/firewire, <linux/firewire*.h>)
-P: Kristian Hoegsberg, Stefan Richter
-M: krh@redhat.com, stefanr@s5r6.in-berlin.de
+FIREWIRE SUBSYSTEM
+P: Kristian Hoegsberg
+M: krh@redhat.com
+P: Stefan Richter
+M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
+F: drivers/firewire/
+F: include/linux/firewire*.h
FIRMWARE LOADER (request_firmware)
L: linux-kernel@vger.kernel.org
S: Orphan
+F: Documentation/firmware_class/
+F: drivers/base/firmware*.c
+F: include/linux/firmware.h
FPU EMULATOR
P: Bill Metzenthen
-M: billm@suburbia.net
-W: http://suburbia.net/~billm/floating-point/emulator/
+M: billm@melbpc.org.au
+W: http://floatingpoint.sourceforge.net/emulator/index.html
S: Maintained
+F: arch/x86/math-emu/
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
P: Mike McLagan
M: mike.mclagan@linux.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/wan/dlci.c
+F: drivers/net/wan/sdla.c
FRAMEBUFFER LAYER
P: Antonino Daplas
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://linux-fbdev.sourceforge.net/
S: Maintained
+F: Documentation/fb/
+F: drivers/video/fb*
+F: include/linux/fb.h
FREESCALE DMA DRIVER
P: Li Yang
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/dma/fsldma.*
FREESCALE I2C CPM DRIVER
P: Jochen Friedrich
L: linuxppc-dev@ozlabs.org
L: linux-i2c@vger.kernel.org
S: Maintained
+F: drivers/i2c/busses/i2c-cpm.c
FREESCALE IMX / MXC FRAMEBUFFER DRIVER
P: Sascha Hauer
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/plat-mxc/include/mach/imxfb.h
+F: drivers/video/imxfb.c
FREESCALE SOC FS_ENET DRIVER
P: Pantelis Antoniou
L: linuxppc-dev@ozlabs.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/fs_enet/
+F: include/linux/fs_enet_pd.h
FREESCALE QUICC ENGINE LIBRARY
P: Timur Tabi
M: timur@freescale.com
L: linuxppc-dev@ozlabs.org
S: Supported
+F: arch/powerpc/sysdev/qe_lib/
+F: arch/powerpc/include/asm/*qe.h
FREESCALE HIGHSPEED USB DEVICE DRIVER
P: Li Yang
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
+F: drivers/usb/gadget/fsl_usb2_udc.c
FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
P: Li Yang
L: netdev@vger.kernel.org
L: linuxppc-dev@ozlabs.org
S: Maintained
+F: drivers/net/ucc_geth*
FREESCALE QUICC ENGINE UCC UART DRIVER
P: Timur Tabi
M: timur@freescale.com
L: linuxppc-dev@ozlabs.org
S: Supported
+F: drivers/serial/ucc_uart.c
FREESCALE SOC SOUND DRIVERS
P: Timur Tabi
L: alsa-devel@alsa-project.org
L: linuxppc-dev@ozlabs.org
S: Supported
+F: sound/soc/fsl/fsl*
+F: sound/soc/fsl/mpc8610_hpcd.c
FREEVXFS FILESYSTEM
P: Christoph Hellwig
M: hch@infradead.org
W: ftp://ftp.openlinux.org/pub/people/hch/vxfs
S: Maintained
+F: fs/freevxfs/
FREEZER
P: Pavel Machek
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
S: Supported
+F: Documentation/power/freezing-of-tasks.txt
+F: include/linux/freezer.h
+F: kernel/freezer.c
+
+FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
+P: David Howells
+M: dhowells@redhat.com
+L: linux-cachefs@redhat.com
+S: Supported
+F: Documentation/filesystems/caching/
+F: fs/fscache/
+F: include/linux/fscache*.h
FTRACE
P: Steven Rostedt
M: rostedt@goodmis.org
S: Maintained
+F: Documentation/ftrace.txt
+F: arch/*/*/*/ftrace.h
+F: arch/*/kernel/ftrace.c
+F: include/*/ftrace.h
+F: kernel/trace/
FUJITSU FR-V (FRV) PORT
P: David Howells
M: dhowells@redhat.com
S: Maintained
+F: arch/frv/
FUJITSU LAPTOP EXTRAS
P: Jonathan Woithe
M: jwoithe@physics.adelaide.edu.au
L: linux-acpi@vger.kernel.org
S: Maintained
+F: drivers/platform/x86/fujitsu-laptop.c
FUSE: FILESYSTEM IN USERSPACE
P: Miklos Szeredi
L: fuse-devel@lists.sourceforge.net
W: http://fuse.sourceforge.net/
S: Maintained
+F: fs/fuse/
+F: include/linux/fuse.h
FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
P: Rik Faith
M: faith@cs.unc.edu
L: linux-scsi@vger.kernel.org
S: Odd Fixes (e.g., new signatures)
+F: drivers/scsi/fdomain.*
GDT SCSI DISK ARRAY CONTROLLER DRIVER
P: Achim Leubner
L: linux-scsi@vger.kernel.org
W: http://www.icp-vortex.com/
S: Supported
+F: drivers/scsi/gdt*
GENERIC GPIO I2C DRIVER
P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
+F: drivers/i2c/busses/i2c-gpio.c
+F: include/linux/i2c-gpio.h
GENERIC HDLC (WAN) DRIVERS
P: Krzysztof Halasa
M: khc@pm.waw.pl
W: http://www.kernel.org/pub/linux/utils/net/hdlc/
S: Maintained
+F: drivers/net/wan/c101.c
+F: drivers/net/wan/hd6457*
+F: drivers/net/wan/hdlc*
+F: drivers/net/wan/n2.c
+F: drivers/net/wan/pc300too.c
+F: drivers/net/wan/pci200syn.c
+F: drivers/net/wan/wanxl*
GFS2 FILE SYSTEM
P: Steven Whitehouse
M: swhiteho@redhat.com
L: cluster-devel@redhat.com
W: http://sources.redhat.com/cluster/
-T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
-T: git kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw.git
S: Supported
+F: Documentation/filesystems/gfs2*.txt
+F: fs/gfs2/
+F: include/linux/gfs2_ondisk.h
GIGASET ISDN DRIVERS
P: Hansjoerg Lipp
L: gigaset307x-common@lists.sourceforge.net
W: http://gigaset307x.sourceforge.net/
S: Maintained
+F: Documentation/isdn/README.gigaset
+F: drivers/isdn/gigaset/
+F: include/linux/gigaset_dev.h
HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
P: Frank Seidel
L: lm-sensors@lm-sensors.org
W: http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
S: Maintained
+F: drivers/hwmon/hdaps.c
HYPERVISOR VIRTUAL CONSOLE DRIVER
L: linuxppc-dev@ozlabs.org
P: Frank Zago
M: frank@zago.net
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: drivers/media/video/gspca/finepix.c
GSPCA M5602 SUBDRIVER
P: Erik Andren
M: erik.andren@gmail.com
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: drivers/media/video/gspca/m5602/
GSPCA PAC207 SONIXB SUBDRIVER
P: Hans de Goede
M: hdegoede@redhat.com
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: drivers/media/video/gspca/pac207.c
GSPCA T613 SUBDRIVER
P: Leandro Costantino
M: lcostantino@gmail.com
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: drivers/media/video/gspca/t613.c
GSPCA USB WEBCAM DRIVER
P: Jean-Francois Moine
M: moinejf@free.fr
W: http://moinejf.free.fr
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: drivers/media/video/gspca/
HARDWARE MONITORING
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
S: Orphan
+F: drivers/hwmon/
HARDWARE RANDOM NUMBER GENERATOR CORE
S: Orphan
+F: Documentation/hw_random.txt
+F: drivers/char/hw_random/
+F: include/linux/hw_random.h
HARMONY SOUND DRIVER
P: Kyle McMartin
M: kyle@mcmartin.ca
L: linux-parisc@vger.kernel.org
S: Maintained
+F: sound/parisc/harmony.*
HAYES ESP SERIAL DRIVER
P: Andrew J. Robinson
L: linux-kernel@vger.kernel.org
W: http://www.nyx.net/~arobinso
S: Maintained
-
-HEWLETT-PACKARD FIBRE CHANNEL 64-bit/66MHz PCI non-intelligent HBA
-P: Chirag Kantharia
-M: chirag.kantharia@hp.com
-L: iss_storagedev@hp.com
-S: Maintained
+F: Documentation/serial/hayes-esp.txt
+F: drivers/char/esp.c
HEWLETT-PACKARD SMART2 RAID DRIVER
P: Chirag Kantharia
M: chirag.kantharia@hp.com
L: iss_storagedev@hp.com
S: Maintained
+F: Documentation/blockdev/cpqarray.txt
+F: drivers/block/cpqarray.*
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
P: Mike Miller
M: mike.miller@hp.com
L: iss_storagedev@hp.com
S: Supported
+F: Documentation/blockdev/cciss.txt
+F: drivers/block/cciss*
+F: include/linux/cciss_ioctl.h
HFS FILESYSTEM
P: Roman Zippel
M: zippel@linux-m68k.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/hfs.txt
+F: fs/hfs/
HGA FRAMEBUFFER DRIVER
P: Ferenc Bakonyi
L: linux-nvidia@lists.surfsouth.com
W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
S: Maintained
+F: drivers/video/hgafb.c
HIBERNATION (aka Software Suspend, aka swsusp)
P: Pavel Machek
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
S: Supported
+F: arch/x86/power/
+F: drivers/base/power/
+F: kernel/power/
+F: include/linux/suspend.h
+F: include/linux/freezer.h
+F: include/linux/pm.h
+F: arch/*/include/asm/suspend*.h
HID CORE LAYER
P: Jiri Kosina
M: jkosina@suse.cz
L: linux-input@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
+F: drivers/hid/
+F: include/linux/hid*
HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
P: Thomas Gleixner
M: tglx@linutronix.de
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/timers/
+F: kernel/hrtimer.c
+F: include/linux/hrtimer.h
HIGH-SPEED SCC DRIVER FOR AX.25
P: Klaus Kudielka
L: linux-hams@vger.kernel.org
W: http://www.nt.tuwien.ac.at/~kkudielk/Linux/
S: Maintained
+F: drivers/net/hamradio/dmascc.c
+F: drivers/net/hamradio/scc.c
HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
P: HighPoint Linux Team
M: linux@highpoint-tech.com
W: http://www.highpoint-tech.com
S: Supported
+F: Documentation/scsi/hptiop.txt
+F: drivers/scsi/hptiop.c
HIPPI
P: Jes Sorensen
M: jes@trained-monkey.org
L: linux-hippi@sunsite.dk
S: Maintained
+F: include/linux/hippidevice.h
+F: include/linux/if_hippi.h
+F: net/802/hippi.c
HOST AP DRIVER
P: Jouni Malinen
L: linux-wireless@vger.kernel.org
W: http://hostap.epitest.fi/
S: Maintained
+F: drivers/net/wireless/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
P: Carlos Corbacho
M: carlos@strangeworlds.co.uk
S: Odd Fixes
+F: drivers/platform/x86/tc1100-wmi.c
HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
P: Jaroslav Kysela
M: perex@perex.cz
S: Maintained
+F: drivers/net/hp100.*
-HPET: High Precision Event Timers driver (drivers/char/hpet.c)
+HPET: High Precision Event Timers driver
P: Clemens Ladisch
M: clemens@ladisch.de
S: Maintained
+F: Documentation/timers/hpet.txt
+F: drivers/char/hpet.c
+F: include/linux/hpet.h
HPET: i386
P: Venkatesh Pallipadi (Venki)
M: venkatesh.pallipadi@intel.com
S: Maintained
+F: arch/x86/kernel/hpet.c
+F: arch/x86/include/asm/hpet.h
HPET: x86_64
P: Vojtech Pavlik
M: vojtech@suse.cz
S: Maintained
-HPET: ACPI hpet.c
+HPET: ACPI
P: Bob Picco
M: bob.picco@hp.com
S: Maintained
+F: drivers/char/hpet.c
HPFS FILESYSTEM
P: Mikulas Patocka
M: mikulas@artax.karlin.mff.cuni.cz
W: http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
S: Maintained
+F: fs/hpfs/
-HSO 3G Modem Driver (hso.c)
-P: Denis Joseph Barrow
-M: d.barow@option.com
+HSO 3G MODEM DRIVER
+P: Jan Dumon
+M: j.dumon@option.com
W: http://www.pharscape.org
S: Maintained
+F: drivers/net/usb/hso.c
HTCPEN TOUCHSCREEN DRIVER
P: Pau Oliva Fora
M: pof@eslack.org
L: linux-input@vger.kernel.org
S: Maintained
+F: drivers/input/touchscreen/htcpen.c
HUGETLB FILESYSTEM
P: William Irwin
M: wli@holomorphy.com
S: Maintained
+F: fs/hugetlbfs/
I2C/SMBUS STUB DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
L: linux-i2c@vger.kernel.org
S: Maintained
+F: drivers/i2c/busses/i2c-stub.c
I2C SUBSYSTEM
P: Jean Delvare (PC drivers, core)
W: http://i2c.wiki.kernel.org/
T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
S: Maintained
+F: Documentation/i2c/
+F: drivers/i2c/
+F: include/linux/i2c.h
+F: include/linux/i2c-dev.h
+F: include/linux/i2c-id.h
I2C-TINY-USB DRIVER
P: Till Harbaum
M: till@harbaum.org
L: linux-i2c@vger.kernel.org
-T: http://www.harbaum.org/till/i2c_tiny_usb
+W: http://www.harbaum.org/till/i2c_tiny_usb
S: Maintained
+F: drivers/i2c/busses/i2c-tiny-usb.c
i386 BOOT CODE
P: H. Peter Anvin
M: hpa@zytor.com
L: Linux-Kernel@vger.kernel.org
S: Maintained
+F: arch/x86/boot/
i386 SETUP CODE / CPU ERRATA WORKAROUNDS
P: H. Peter Anvin
M: hpa@zytor.com
-T: git.kernel.org:/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
S: Maintained
IA64 (Itanium) PLATFORM
M: tony.luck@intel.com
L: linux-ia64@vger.kernel.org
W: http://www.ia64-linux.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
+F: arch/ia64/
IBM MCA SCSI SUBSYSTEM DRIVER
P: Michael Lang
M: langa2@kph.uni-mainz.de
W: http://www.uni-mainz.de/~langm000/linux.html
S: Maintained
+F: drivers/scsi/ibmmca.c
IBM Power Linux RAID adapter
P: Brian King
M: brking@us.ibm.com
S: Supported
+F: drivers/scsi/ipr.*
IBM ServeRAID RAID DRIVER
P: Jack Hammer
M: ipslinux@adaptec.com
W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html
S: Supported
+F: drivers/scsi/ips.*
IDE SUBSYSTEM
P: Bartlomiej Zolnierkiewicz
M: bzolnier@gmail.com
L: linux-ide@vger.kernel.org
-T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
S: Maintained
+F: Documentation/ide/
+F: drivers/ide/
+F: include/linux/ide.h
IDE/ATAPI DRIVERS
P: Borislav Petkov
M: petkovbb@gmail.com
L: linux-ide@vger.kernel.org
S: Maintained
+F: Documentation/cdrom/ide-cd
+F: drivers/ide/ide-cd*
IDLE-I7300
P: Andy Henroid
M: andrew.d.henroid@intel.com
L: linux-pm@lists.linux-foundation.org
S: Supported
+F: drivers/idle/i7300_idle.c
-IEEE 1394 SUBSYSTEM (drivers/ieee1394)
+IEEE 1394 SUBSYSTEM
P: Ben Collins
M: ben.collins@ubuntu.com
P: Stefan Richter
M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
W: http://www.linux1394.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
+F: drivers/ieee1394/
-IEEE 1394 RAW I/O DRIVER (raw1394)
+IEEE 1394 RAW I/O DRIVER
P: Dan Dennedy
M: dan@dennedy.org
P: Stefan Richter
M: stefanr@s5r6.in-berlin.de
L: linux1394-devel@lists.sourceforge.net
S: Maintained
+F: drivers/ieee1394/raw1394*
INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
P: Mimi Zohar
M: zohar@us.ibm.com
S: Supported
+F: security/integrity/ima/
IMS TWINTURBO FRAMEBUFFER DRIVER
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Orphan
+F: drivers/video/imsttfb.c
INFINIBAND SUBSYSTEM
P: Roland Dreier
M: hal.rosenstock@gmail.com
L: general@lists.openfabrics.org (moderated for non-subscribers)
W: http://www.openib.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
S: Supported
+F: Documentation/infiniband/
+F: drivers/infiniband/
+F: include/linux/if_infiniband.h
INOTIFY
P: John McCutchan
M: rlove@rlove.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/inotify.txt
+F: fs/notify/inotify/
+F: include/linux/inotify.h
INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
P: Dmitry Torokhov
M: dmitry.torokhov@gmail.com
M: dtor@mail.ru
L: linux-input@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/dtor/input.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
S: Maintained
+F: drivers/input/
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
P: Sylvain Meyer
M: sylvain.meyer@worldonline.fr
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: Documentation/fb/intelfb.txt
+F: drivers/video/intelfb/
INTEL 810/815 FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/i810/
INTEL MENLOW THERMAL DRIVER
P: Sujith Thomas
L: linux-acpi@vger.kernel.org
W: http://www.lesswatts.org/projects/acpi/
S: Supported
+F: drivers/platform/x86/intel_menlow.c
INTEL IA32 MICROCODE UPDATE SUPPORT
P: Tigran Aivazian
M: tigran@aivazian.fsnet.co.uk
S: Maintained
+F: arch/x86/kernel/microcode_core.c
+F: arch/x86/kernel/microcode_intel.c
INTEL I/OAT DMA DRIVER
P: Maciej Sosnowski
M: maciej.sosnowski@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
+F: drivers/dma/ioat*
INTEL IOMMU (VT-d)
P: David Woodhouse
M: dwmw2@infradead.org
L: iommu@lists.linux-foundation.org
-T: git://git.infradead.org/iommu-2.6.git
+T: git git://git.infradead.org/iommu-2.6.git
S: Supported
+F: drivers/pci/intel-iommu.c
+F: include/linux/intel-iommu.h
INTEL IOP-ADMA DMA DRIVER
P: Dan Williams
M: dan.j.williams@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
+F: drivers/dma/iop-adma.c
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
P: Krzysztof Halasa
M: khc@pm.waw.pl
S: Maintained
+F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
+F: arch/arm/mach-ixp4xx/include/mach/npe.h
+F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+F: arch/arm/mach-ixp4xx/ixp4xx_npe.c
+F: drivers/net/arm/ixp4xx_eth.c
+F: drivers/net/wan/ixp4xx_hss.c
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
S: Maintained
+F: drivers/char/hw_random/ixp4xx-rng.c
INTEL IXP2000 ETHERNET DRIVER
P: Lennert Buytenhek
M: kernel@wantstofly.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
P: Jeff Kirsher
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
S: Supported
+F: drivers/net/e100.c
+F: drivers/net/e1000/
+F: drivers/net/e1000e/
+F: drivers/net/igb/
+F: drivers/net/ixgb/
+F: drivers/net/ixgbe/
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
P: Zhu Yi
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2100.sourceforge.net
S: Supported
+F: Documentation/networking/README.ipw2100
+F: drivers/net/wireless/ipw2x00/ipw2100.*
INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
P: Zhu Yi
W: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
+F: Documentation/networking/README.ipw2200
+F: drivers/net/wireless/ipw2x00/ipw2200.*
INTEL WIRELESS WIMAX CONNECTION 2400
P: Inaky Perez-Gonzalez
L: wimax@linuxwimax.org
S: Supported
W: http://linuxwimax.org
+F: Documentation/wimax/README.i2400m
+F: drivers/net/wimax/i2400m/
+F: include/linux/wimax/i2400m.h
INTEL WIRELESS WIFI LINK (iwlwifi)
P: Zhu Yi
L: linux-wireless@vger.kernel.org
L: ipw3945-devel@lists.sourceforge.net
W: http://intellinuxwireless.org
-T: git kernel.org:/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git
S: Supported
+F: drivers/net/wireless/iwlwifi/
IOC3 ETHERNET DRIVER
P: Ralf Baechle
M: ralf@linux-mips.org
L: linux-mips@linux-mips.org
S: Maintained
+F: drivers/net/ioc3-eth.c
IOC3 SERIAL DRIVER
P: Pat Gefre
M: pfg@sgi.com
L: linux-mips@linux-mips.org
S: Maintained
+F: drivers/serial/ioc3_serial.c
IP MASQUERADING
P: Juanjo Ciarlante
M: jjciarla@raiz.uncu.edu.ar
S: Maintained
+F: net/ipv4/netfilter/ipt_MASQUERADE.c
IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
P: Francois Romieu
M: jesse@icplus.com.tw
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/ipg.c
IPATH DRIVER
P: Ralph Campbell
L: general@lists.openfabrics.org
T: git git://git.qlogic.com/ipath-linux-2.6
S: Supported
+F: drivers/infiniband/hw/ipath/
IPMI SUBSYSTEM
P: Corey Minyard
L: openipmi-developer@lists.sourceforge.net
W: http://openipmi.sourceforge.net/
S: Supported
+F: Documentation/IPMI.txt
+F: drivers/char/ipmi/
+F: include/linux/ipmi*
IPS SCSI RAID DRIVER
P: Adaptec OEM Raid Solutions
L: linux-scsi@vger.kernel.org
W: http://www.adaptec.com/
S: Maintained
+F: drivers/scsi/ips*
IPVS
P: Wensong Zhang
L: netdev@vger.kernel.org
L: lvs-devel@vger.kernel.org
S: Maintained
+F: Documentation/networking/ipvs-sysctl.txt
+F: net/netfilter/ipvs/
IPWIRELESS DRIVER
P: Jiri Kosina
P: David Sterba
M: dsterba@suse.cz
S: Maintained
-T: git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
+F: drivers/char/pcmcia/ipwireless/
IPX NETWORK LAYER
P: Arnaldo Carvalho de Melo
M: acme@ghostprotocols.net
L: netdev@vger.kernel.org
S: Maintained
+F: include/linux/ipx.h
+F: include/net/ipx.h
+F: net/ipx/
IRDA SUBSYSTEM
P: Samuel Ortiz
L: irda-users@lists.sourceforge.net (subscribers-only)
W: http://irda.sourceforge.net/
S: Maintained
+F: Documentation/networking/irda.txt
+F: drivers/net/irda/
+F: include/net/irda/
+F: net/irda/
ISAPNP
P: Jaroslav Kysela
M: perex@perex.cz
S: Maintained
+F: Documentation/isapnp.txt
+F: drivers/pnp/isapnp/
+F: include/linux/isapnp.h
ISCSI
P: Mike Christie
M: michaelc@cs.wisc.edu
L: open-iscsi@googlegroups.com
W: www.open-iscsi.org
-T: git kernel.org:/pub/scm/linux/kernel/mnc/linux-2.6-iscsi.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
S: Maintained
+F: drivers/scsi/*iscsi*
+F: include/scsi/*iscsi*
ISDN SUBSYSTEM
P: Karsten Keil
M: isdn@linux-pingi.de
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.isdn4linux.de
-T: git kernel.org:/pub/scm/linux/kernel/kkeil/isdn-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
S: Maintained
+F: Documentation/isdn/
+F: drivers/isdn/
+F: include/linux/isdn.h
+F: include/linux/isdn/
ISDN SUBSYSTEM (Eicon active card driver)
P: Armin Schindler
L: isdn4linux@listserv.isdn4linux.de (subscribers-only)
W: http://www.melware.de
S: Maintained
+F: drivers/isdn/hardware/eicon/
IVTV VIDEO4LINUX DRIVER
P: Hans Verkuil
L: ivtv-devel@ivtvdriver.org
L: ivtv-users@ivtvdriver.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.ivtvdriver.org
S: Maintained
+F: Documentation/video4linux/*.ivtv
+F: drivers/media/video/ivtv/
+F: include/linux/ivtv*
JFS FILESYSTEM
P: Dave Kleikamp
M: shaggy@austin.ibm.com
L: jfs-discussion@lists.sourceforge.net
W: http://jfs.sourceforge.net/
-T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
S: Supported
+F: Documentation/filesystems/jfs.txt
+F: fs/jfs/
JME NETWORK DRIVER
P: Guo-Fu Tseng
M: cooldavid@cooldavid.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/jme.*
JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
P: David Woodhouse
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/doc/jffs2.html
S: Maintained
+F: fs/jffs2/
+F: include/linux/jffs2.h
+F: include/mtd/jffs2-user.h
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P: Stephen Tweedie, Andrew Morton
-M: sct@redhat.com, akpm@linux-foundation.org
+P: Stephen Tweedie
+M: sct@redhat.com
+P: Andrew Morton
+M: akpm@linux-foundation.org
L: linux-ext4@vger.kernel.org
S: Maintained
+F: fs/jbd*/
+F: include/linux/ext*jbd*.h
+F: include/linux/jbd*.h
K8TEMP HARDWARE MONITORING DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/k8temp
+F: drivers/hwmon/k8temp.c
KCONFIG
P: Roman Zippel
M: zippel@linux-m68k.org
L: linux-kbuild@vger.kernel.org
S: Maintained
+F: Documentation/kbuild/kconfig-language.txt
+F: scripts/kconfig/
KDUMP
P: Vivek Goyal
L: linux-kernel@vger.kernel.org
W: http://lse.sourceforge.net/kdump/
S: Maintained
+F: Documentation/kdump/
KERNEL AUTOMOUNTER (AUTOFS)
P: H. Peter Anvin
M: hpa@zytor.com
L: autofs@linux.kernel.org
S: Odd Fixes
+F: fs/autofs/
KERNEL AUTOMOUNTER v4 (AUTOFS4)
P: Ian Kent
M: raven@themaw.net
L: autofs@linux.kernel.org
S: Maintained
+F: fs/autofs4/
-KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*)
+KERNEL BUILD
P: Sam Ravnborg
M: sam@ravnborg.org
-T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git
-T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
L: linux-kbuild@vger.kernel.org
S: Maintained
+F: Documentation/kbuild/
+F: Makefile
+F: scripts/Makefile.*
KERNEL JANITORS
P: Several
L: linux-nfs@vger.kernel.org
W: http://nfs.sourceforge.net/
S: Supported
+F: fs/nfsd/
+F: include/linux/nfsd/
+F: fs/lockd/
+F: fs/nfs_common/
+F: net/sunrpc/
+F: include/linux/lockd/
+F: include/linux/sunrpc/
KERNEL VIRTUAL MACHINE (KVM)
P: Avi Kivity
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
+F: Documentation/*/kvm.txt
+F: arch/*/kvm/
+F: arch/*/include/asm/kvm*
+F: include/linux/kvm*
+F: virt/kvm/
KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
P: Joerg Roedel
L: kvm@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
+F: arch/x86/include/asm/svm.h
+F: arch/x86/kvm/kvm_svm.h
+F: arch/x86/kvm/svm.c
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
P: Hollis Blanchard
L: kvm-ppc@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
+F: arch/powerpc/include/asm/kvm*
+F: arch/powerpc/kvm/
KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
P: Xiantao Zhang
L: kvm-ia64@vger.kernel.org
W: http://kvm.qumranet.com
S: Supported
+F: Documentation/ia64/kvm.txt
+F: arch/ia64/include/asm/kvm*
+F: arch/ia64/kvm/
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
P: Carsten Otte
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
+F: Documentation/s390/kvm.txt
+F: arch/s390/include/asm/kvm*
+F: arch/s390/kvm/
KEXEC
P: Eric Biederman
L: linux-kernel@vger.kernel.org
L: kexec@lists.infradead.org
S: Maintained
+F: include/linux/kexec.h
+F: kernel/kexec.c
KGDB
P: Jason Wessel
M: jason.wessel@windriver.com
L: kgdb-bugreport@lists.sourceforge.net
S: Maintained
+F: Documentation/DocBook/kgdb.tmpl
+F: drivers/misc/kgdbts.c
+F: drivers/serial/kgdboc.c
+F: include/linux/kgdb.h
+F: kernel/kgdb.c
KMEMTRACE
P: Eduard - Gabriel Munteanu
M: eduard.munteanu@linux360.ro
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/trace/kmemtrace.txt
+F: include/trace/kmemtrace.h
+F: kernel/trace/kmemtrace.c
KPROBES
P: Ananth N Mavinakayanahalli
M: mhiramat@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/kprobes.txt
+F: include/linux/kprobes.h
+F: kernel/kprobes.c
KS0108 LCD CONTROLLER DRIVER
P: Miguel Ojeda Sandonis
W: http://miguelojeda.es/auxdisplay.htm
W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
S: Maintained
+F: Documentation/auxdisplay/ks0108
+F: drivers/auxdisplay/ks0108.c
+F: include/linux/ks0108.h
LAPB module
L: linux-x25@vger.kernel.org
S: Orphan
+F: Documentation/networking/lapb-module.txt
+F: include/*/lapb.h
+F: net/lapb/
LASI 53c700 driver for PARISC
P: James E.J. Bottomley
M: James.Bottomley@HansenPartnership.com
L: linux-scsi@vger.kernel.org
S: Maintained
+F: Documentation/scsi/53c700.txt
+F: drivers/scsi/53c700*
LED SUBSYSTEM
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
+F: drivers/leds/
+F: include/linux/leds.h
LEGO USB Tower driver
P: Juergen Stuber
L: legousb-devel@lists.sourceforge.net
W: http://legousb.sourceforge.net/
S: Maintained
+F: drivers/usb/misc/legousbtower.c
LGUEST
P: Rusty Russell
L: lguest@ozlabs.org
W: http://lguest.ozlabs.org/
S: Maintained
+F: Documentation/lguest/
+F: arch/x86/lguest/
+F: drivers/lguest/
+F: include/linux/lguest*.h
+F: arch/x86/include/asm/lguest*.h
LINUX FOR IBM pSERIES (RS/6000)
P: Paul Mackerras
W: http://www.ibm.com/linux/ltc/projects/ppc
S: Supported
-LINUX FOR NCR VOYAGER
-P: James Bottomley
-M: James.Bottomley@HansenPartnership.com
-W: http://www.hansenpartnership.com/voyager
-S: Maintained
-
LINUX FOR POWERPC (32-BIT AND 64-BIT)
P: Benjamin Herrenschmidt
M: benh@kernel.crashing.org
M: paulus@samba.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
-T: git kernel.org:/pub/scm/linux/kernel/git/benh/powerpc.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
S: Supported
LINUX FOR POWER MACINTOSH
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
-P: Sylvain Munaut
-M: tnt@246tNt.com
P: Grant Likely
M: grant.likely@secretlab.ca
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
M: grant.likely@secretlab.ca
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
P: Chris Wright
M: chrisw@sous-sol.org
L: linux-security-module@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
LLC (802.2)
P: Arnaldo Carvalho de Melo
M: acme@ghostprotocols.net
S: Maintained
+F: include/linux/llc.h
+F: include/net/llc*
+F: net/llc/
LIS3LV02D ACCELEROMETER DRIVER
P: Eric Piel
M: eric.piel@tremplin-utc.net
S: Maintained
+F: Documentation/hwmon/lis3lv02d
+F: drivers/hwmon/lis3lv02d.*
LM83 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/lm83
+F: drivers/hwmon/lm83.c
LM90 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/lm90
+F: drivers/hwmon/lm90.c
LOCKDEP AND LOCKSTAT
P: Peter Zijlstra
P: Ingo Molnar
M: mingo@redhat.com
L: linux-kernel@vger.kernel.org
-T: git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
S: Maintained
+F: Documentation/lockdep*.txt
+F: Documentation/lockstat.txt
+F: include/linux/lockdep.h
+F: kernel/lockdep*
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
P: Richard Russon (FlatCap)
L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
+F: Documentation/ldm.txt
+F: fs/partitions/ldm.*
LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
P: Eric Moore
L: linux-scsi@vger.kernel.org
W: http://www.lsilogic.com/support
S: Supported
+F: drivers/message/fusion/
LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
P: Matthew Wilcox
M: matthew@wil.cx
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/sym53c8xx_2/
LTP (Linux Test Project)
P: Subrata Modak
M: vapier@gentoo.org
L: ltp-list@lists.sourceforge.net (subscribers-only)
W: http://ltp.sourceforge.net/
-T: git kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
S: Maintained
M32R ARCHITECTURE
L: linux-m32r-ja@ml.linux-m32r.org (in Japanese)
W: http://www.linux-m32r.org/
S: Maintained
+F: arch/m32r/
+F: include/asm-m32r/
M68K ARCHITECTURE
P: Geert Uytterhoeven
M: zippel@linux-m68k.org
L: linux-m68k@lists.linux-m68k.org
W: http://www.linux-m68k.org/
-T: git git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
S: Maintained
+F: arch/m68k/
+F: drivers/zorro/
M68K ON APPLE MACINTOSH
P: Joshua Thompson
W: http://www.mac.linux-m68k.org/
L: linux-m68k@lists.linux-m68k.org
S: Maintained
+F: arch/m68k/mac/
M68K ON HP9000/300
P: Philip Blundell
M: philb@gnu.org
W: http://www.tazenda.demon.co.uk/phil/linux-hp
S: Maintained
+F: arch/m68k/hp300/
MAC80211
P: Johannes Berg
M: johannes@sipsolutions.net
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
+F: Documentation/networking/mac80211-injection.txt
+F: include/net/mac80211.h
+F: net/mac80211/
MAC80211 PID RATE CONTROL
P: Stefano Brivio
M: mattias.nissler@gmx.de
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
+F: net/mac80211/rc80211_pid*
MACVLAN DRIVER
P: Patrick McHardy
M: kaber@trash.net
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/macvlan.c
+F: include/linux/if_macvlan.h
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
P: Michael Kerrisk
M: dcbw@redhat.com
L: libertas-dev@lists.infradead.org
S: Maintained
+F: drivers/net/wireless/libertas/
MARVELL MV643XX ETHERNET DRIVER
P: Lennert Buytenhek
M: buytenh@marvell.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/mv643xx_eth.*
+F: include/linux/mv643xx.h
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
P: Nicolas Pitre
M: vandrove@vc.cvut.cz
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/matrox/matroxfb_*
+F: include/linux/matroxfb.h
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
P: Hans J. Koch
M: hjk@linutronix.de
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/max6650
+F: drivers/hwmon/max6650.c
+
+MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
+P: Mauro Carvalho Chehab
+M: mchehab@infradead.org
+P: LinuxTV.org Project
+L: linux-media@vger.kernel.org
+W: http://linuxtv.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S: Maintained
+F: Documentation/dvb/
+F: Documentation/video4linux/
+F: drivers/media/
+F: include/media/
+F: include/linux/dvb/
+F: include/linux/videodev*.h
MEGARAID SCSI DRIVERS
P: Neela Syam Kolli
L: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
+F: Documentation/scsi/megaraid.txt
+F: drivers/scsi/megaraid.*
+F: drivers/scsi/megaraid/
MEMORY MANAGEMENT
L: linux-mm@kvack.org
L: linux-kernel@vger.kernel.org
W: http://www.linux-mm.org
S: Maintained
+F: include/linux/mm.h
+F: mm/
MEMORY RESOURCE CONTROLLER
P: Balbir Singh
L: linux-mm@kvack.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: mm/memcontrol.c
MEMORY TECHNOLOGY DEVICES (MTD)
P: David Woodhouse
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/mtd-2.6.git
S: Maintained
+F: drivers/mtd/
+F: include/linux/mtd/
+F: include/mtd/
+
+MICROBLAZE ARCHITECTURE
+P: Michal Simek
+M: monstr@monstr.eu
+L: microblaze-uclinux@itee.uq.edu.au
+W: http://www.monstr.eu/fdt/
+T: git git://git.monstr.eu/linux-2.6-microblaze.git
+S: Supported
+F: arch/microblaze/
MICROTEK X6 SCANNER
P: Oliver Neukum
M: oliver@neukum.name
S: Maintained
+F: drivers/usb/image/microtek.*
MIPS
P: Ralf Baechle
M: ralf@linux-mips.org
W: http://www.linux-mips.org/
L: linux-mips@linux-mips.org
-T: git www.linux-mips.org:/pub/scm/linux.git
+T: git git://git.linux-mips.org/pub/scm/linux.git
S: Supported
+F: Documentation/mips/
+F: arch/mips/
MISCELLANEOUS MCA-SUPPORT
P: James Bottomley
M: James.Bottomley@HansenPartnership.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/ia64/mca.txt
+F: Documentation/mca.txt
+F: drivers/mca/
+F: include/linux/mca*
MODULE SUPPORT
P: Rusty Russell
M: rusty@rustcorp.com.au
L: linux-kernel@vger.kernel.org
S: Maintained
+F: include/linux/module.h
+F: kernel/module.c
MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
P: Stelian Pop
M: stelian@popies.net
W: http://popies.net/meye/
S: Maintained
+F: Documentation/video4linux/meye.txt
+F: drivers/media/video/meye.*
+F: include/linux/meye.h
MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
P: Pavel Pisa
M: ppisa@pikron.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: drivers/mmc/host/imxmmc.*
MOUSE AND MISC DEVICES [GENERAL]
P: Alessandro Rubini
M: rubini@ipvvis.unipv.it
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/input/mouse/
+F: include/linux/gpio_mouse.h
MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
P: Jiri Slaby
M: jirislaby@gmail.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/serial/moxa-smartio
+F: drivers/char/mxser.*
MSI LAPTOP SUPPORT
P: Lennart Poettering
W: https://tango.0pointer.de/mailman/listinfo/s270-linux
W: http://0pointer.de/lennart/tchibo.html
S: Maintained
+F: drivers/platform/x86/msi-laptop.c
MULTIFUNCTION DEVICES (MFD)
P: Samuel Ortiz
M: sameo@linux.intel.com
L: linux-kernel@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
S: Supported
+F: drivers/mfd/
MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
P: Pierre Ossman
-M: drzeus-mmc@drzeus.cx
+M: pierre@ossman.eu
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/mmc/
+F: include/linux/mmc/
MULTIMEDIA CARD (MMC) ETC. OVER SPI
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-kernel@vger.kernel.org
S: Odd Fixes
+F: drivers/mmc/host/mmc_spi.c
+F: include/linux/spi/mmc_spi.h
MULTISOUND SOUND DRIVER
P: Andrew Veliath
M: andrewtv@usa.net
S: Maintained
+F: Documentation/sound/oss/MultiSound
+F: sound/oss/msnd*
MULTITECH MULTIPORT CARD (ISICOM)
P: Jiri Slaby
M: jirislaby@gmail.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/char/isicom.c
+F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
P: Felipe Balbi
M: felipe.balbi@nokia.com
L: linux-usb@vger.kernel.org
-T: git gitorious.org:/musb/mainline.git
+T: git git://gitorious.org/musb/mainline.git
S: Maintained
+F: drivers/usb/musb/
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
P: Andrew Gallatin
L: netdev@vger.kernel.org
W: http://www.myri.com/scs/download-Myri10GE.html
S: Supported
+F: drivers/net/myri10ge/
NATSEMI ETHERNET DRIVER (DP8381x)
P: Tim Hockin
M: thockin@hockin.org
S: Maintained
+F: drivers/net/natsemi.c
NCP FILESYSTEM
P: Petr Vandrovec
M: vandrove@vc.cvut.cz
L: linware@sh.cvut.cz
S: Maintained
+F: fs/ncpfs/
NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
P: James E.J. Bottomley
M: James.Bottomley@HansenPartnership.com
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/NCR_D700.*
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: shemminger@linux-foundation.org
L: netem@lists.linux-foundation.org
S: Maintained
+F: net/sched/sch_netem.c
NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
P: Ramkrishna Vepa
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
S: Supported
+F: Documentation/networking/s2io.txt
+F: drivers/net/s2io*
NETFILTER/IPTABLES/IPCHAINS
P: Rusty Russell
W: http://www.netfilter.org/
W: http://www.iptables.org/
S: Supported
+F: include/linux/netfilter*
+F: include/linux/netfilter/
+F: include/net/netfilter/
+F: net/*/netfilter.c
+F: net/*/netfilter/
+F: net/netfilter/
NETLABEL
P: Paul Moore
W: http://netlabel.sf.net
L: netdev@vger.kernel.org
S: Supported
+F: Documentation/netlabel/
+F: include/net/netlabel.h
+F: net/netlabel/
NETROM NETWORK LAYER
P: Ralf Baechle
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
+F: include/linux/netrom.h
+F: include/net/netrom.h
+F: net/netrom/
NETWORK BLOCK DEVICE (NBD)
P: Paul Clements
M: Paul.Clements@steeleye.com
S: Maintained
-
-NETWORK DEVICE DRIVERS
-P: Jeff Garzik
-M: jgarzik@pobox.com
-L: netdev@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
-S: Maintained
+F: Documentation/blockdev/nbd.txt
+F: drivers/block/nbd.c
+F: include/linux/nbd.h
NETWORKING [GENERAL]
-P: Networking Team
-M: netdev@vger.kernel.org
+P: David S. Miller
+M: davem@davemloft.net
L: netdev@vger.kernel.org
-W: http://linux-net.osdl.org/
+W: http://www.linuxfoundation.org/en/Net
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
+F: net/
+F: include/net/
NETWORKING [IPv4/IPv6]
P: David S. Miller
P: Patrick McHardy
M: kaber@trash.net
L: netdev@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
+F: net/ipv4/
+F: net/ipv6/
+F: include/net/ip*
NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
P: Paul Moore
P: John W. Linville
M: linville@tuxdriver.com
L: linux-wireless@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
S: Maintained
+F: net/wireless/
+F: include/net/ieee80211*
+F: include/net/wireless.h
+
+NETWORKING DRIVERS
+L: netdev@vger.kernel.org
+W: http://www.linuxfoundation.org/en/Net
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+S: Odd Fixes
+F: drivers/net/
NETXEN (1/10) GbE SUPPORT
P: Dhananjay Phadke
L: netdev@vger.kernel.org
W: http://www.netxen.com
S: Supported
+F: drivers/net/netxen/
NFS, SUNRPC, AND LOCKD CLIENTS
P: Trond Myklebust
W: http://client.linux-nfs.org
T: git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
S: Maintained
+F: fs/lockd/
+F: fs/nfs/
+F: fs/nfs_common/
+F: net/sunrpc/
+F: include/linux/lockd/
+F: include/linux/nfs*
+F: include/linux/sunrpc/
NI5010 NETWORK DRIVER
P: Jan-Pascal van Best
M: andi@lisas.de
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/ni5010.*
NILFS2 FILESYSTEM
P: KONISHI Ryusuke
L: users@nilfs.org
W: http://www.nilfs.org/en/
S: Supported
+F: Documentation/filesystems/nilfs2.txt
+F: fs/nilfs2/
+F: include/linux/nilfs2_fs.h
NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
P: YOKOTA Hiroshi
M: yokota@netlab.is.tsukuba.ac.jp
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
+F: Documentation/scsi/NinjaSCSI.txt
+F: drivers/scsi/pcmcia/nsp_*
NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
P: GOTO Masanori
M: yokota@netlab.is.tsukuba.ac.jp
W: http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
S: Maintained
+F: Documentation/scsi/NinjaSCSI.txt
+F: drivers/scsi/nsp32*
NTFS FILESYSTEM
P: Anton Altaparmakov
L: linux-ntfs-dev@lists.sourceforge.net
L: linux-kernel@vger.kernel.org
W: http://www.linux-ntfs.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
S: Maintained
+F: Documentation/filesystems/ntfs.txt
+F: fs/ntfs/
NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/riva/
+F: drivers/video/nvidia/
OMFS FILESYSTEM
P: Bob Copeland
M: me@bobcopeland.com
L: linux-karma-devel@lists.sourceforge.net
S: Maintained
+F: Documentation/filesystems/omfs.txt
+F: fs/omfs/
OMNIKEY CARDMAN 4000 DRIVER
P: Harald Welte
M: laforge@gnumonks.org
S: Maintained
+F: drivers/char/pcmcia/cm4000_cs.c
+F: include/linux/cm4000_cs.h
OMNIKEY CARDMAN 4040 DRIVER
P: Harald Welte
M: laforge@gnumonks.org
S: Maintained
+F: drivers/char/pcmcia/cm4040_cs.*
OMNIVISION OV7670 SENSOR DRIVER
P: Jonathan Corbet
M: corbet@lwn.net
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: drivers/media/video/ov7670.c
ONENAND FLASH DRIVER
P: Kyungmin Park
M: kyungmin.park@samsung.com
L: linux-mtd@lists.infradead.org
S: Maintained
+F: drivers/mtd/onenand/
+F: include/linux/mtd/onenand*.h
ONSTREAM SCSI TAPE DRIVER
P: Willem Riede
L: osst-users@lists.sourceforge.net
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/osst*
+F: drivers/scsi/st*
OPENCORES I2C BUS DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
L: linux-i2c@vger.kernel.org
S: Maintained
+F: Documentation/i2c/busses/i2c-ocores
+F: drivers/i2c/busses/i2c-ocores.c
OPROFILE
P: Robert Richter
M: robert.richter@amd.com
L: oprofile-list@lists.sf.net
S: Maintained
+F: arch/*/oprofile/
+F: drivers/oprofile/
+F: include/linux/oprofile.h
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
P: Mark Fasheh
M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
S: Supported
+F: Documentation/filesystems/ocfs2.txt
+F: Documentation/filesystems/dlmfs.txt
+F: fs/ocfs2/
ORINOCO DRIVER
P: Pavel Roskin
L: orinoco-devel@lists.sourceforge.net
W: http://www.nongnu.org/orinoco/
S: Maintained
+F: drivers/net/wireless/orinoco/
OSD LIBRARY
P: Boaz Harrosh
M: bhalevy@panasas.com
L: osd-dev@open-osd.org
W: http://open-osd.org
-T: git://git.open-osd.org/open-osd.git
+T: git git://git.open-osd.org/open-osd.git
S: Maintained
P54 WIRELESS DRIVER
M: flamingice@sourmilk.net
L: linux-wireless@vger.kernel.org
W: http://prism54.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
S: Maintained
+F: drivers/net/wireless/p54/
PA SEMI ETHERNET DRIVER
P: Olof Johansson
M: olof@lixom.net
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/pasemi_mac.*
PA SEMI SMBUS DRIVER
P: Olof Johansson
M: olof@lixom.net
L: linux-i2c@vger.kernel.org
S: Maintained
+F: drivers/i2c/busses/i2c-pasemi.c
PANASONIC LAPTOP ACPI EXTRAS DRIVER
P: Harald Welte
M: laforge@gnumonks.org
S: Maintained
+F: drivers/platform/x86/panasonic-laptop.c
PANASONIC MN10300/AM33 PORT
P: David Howells
L: linux-am33-list@redhat.com (moderated for non-subscribers)
W: ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
S: Maintained
+F: Documentation/mn10300/
+F: arch/mn10300/
PARALLEL PORT SUPPORT
L: linux-parport@lists.infradead.org (subscribers-only)
S: Orphan
+F: drivers/parport/
+F: include/linux/parport*.h
+F: drivers/char/ppdev.c
+F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
P: Jeremy Fitzhardinge
L: virtualization@lists.osdl.org
L: linux-kernel@vger.kernel.org
S: Supported
+F: Documentation/ia64/paravirt_ops.txt
+F: arch/*/kernel/paravirt*
+F: arch/*/include/asm/paravirt.h
PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
P: Tim Waugh
L: linux-parport@lists.infradead.org (subscribers-only)
W: http://www.torque.net/linux-pp.html
S: Maintained
+F: Documentation/blockdev/paride.txt
+F: drivers/block/paride/
PARISC ARCHITECTURE
P: Kyle McMartin
M: deller@gmx.de
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
S: Maintained
+F: arch/parisc/
+F: drivers/parisc/
PC87360 HARDWARE MONITORING DRIVER
P: Jim Cromie
M: jim.cromie@gmail.com
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/pc87360
+F: drivers/hwmon/pc87360.c
PC8736x GPIO DRIVER
P: Jim Cromie
M: jim.cromie@gmail.com
S: Maintained
+F: drivers/char/pc8736x_gpio.c
PCA9532 LED DRIVER
P: Riku Voipio
M: riku.voipio@iki.fi
S: Maintained
+F: drivers/leds/leds-pca9532.c
+F: include/linux/leds-pca9532.h
PCI ERROR RECOVERY
P: Linas Vepstas
L: linux-kernel@vger.kernel.org
L: linux-pci@vger.kernel.org
S: Supported
+F: Documentation/PCI/pci-error-recovery.txt
+F: Documentation/powerpc/eeh-pci-error-recovery.txt
PCI SUBSYSTEM
P: Jesse Barnes
M: jbarnes@virtuousgeek.org
L: linux-kernel@vger.kernel.org
L: linux-pci@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
S: Supported
+F: Documentation/PCI/
+F: drivers/pci/
+F: include/linux/pci*
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: linux-pci@vger.kernel.org
S: Supported
+F: drivers/pci/pcie/
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
W: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
-T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
+F: Documentation/pcmcia/
+F: drivers/pcmcia/
+F: include/pcmcia/
PCNET32 NETWORK DRIVER
P: Don Fry
M: pcnet32@verizon.net
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/pcnet32.c
PER-TASK DELAY ACCOUNTING
P: Balbir Singh
M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: include/linux/delayacct.h
+F: kernel/delayacct.c
PERSONALITY HANDLING
P: Christoph Hellwig
M: hch@infradead.org
L: linux-abi-devel@lists.sourceforge.net
S: Maintained
+F: include/linux/personality.h
PHRAM MTD DRIVER
P: Joern Engel
M: joern@lazybastard.org
L: linux-mtd@lists.infradead.org
S: Maintained
+F: drivers/mtd/devices/phram.c
PKTCDVD DRIVER
P: Peter Osterlund
M: petero2@telia.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/block/pktcdvd.c
+F: include/linux/pktcdvd.h
POSIX CLOCKS and TIMERS
P: Thomas Gleixner
M: tglx@linutronix.de
L: linux-kernel@vger.kernel.org
S: Supported
+F: fs/timerfd.c
+F: include/linux/timer*
+F: kernel/*timer*
POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
P: Anton Vorontsov
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-kernel@vger.kernel.org
-T: git git.infradead.org/battery-2.6.git
+T: git git://git.infradead.org/battery-2.6.git
S: Maintained
+F: include/linux/power_supply.h
+F: drivers/power/power_supply*
PNP SUPPORT
P: Adam Belay
P: Bjorn Helgaas
M: bjorn.helgaas@hp.com
S: Maintained
+F: drivers/pnp/
PNXxxxx I2C DRIVER
P: Vitaly Wool
M: vitalywool@gmail.com
L: linux-i2c@vger.kernel.org
S: Maintained
+F: drivers/i2c/busses/i2c-pnx.c
PPP PROTOCOL DRIVERS AND COMPRESSORS
P: Paul Mackerras
M: paulus@samba.org
L: linux-ppp@vger.kernel.org
S: Maintained
+F: drivers/net/ppp_*
PPP OVER ATM (RFC 2364)
P: Mitchell Blank Jr
M: mitch@sfgoth.com
S: Maintained
+F: net/atm/pppoatm.c
+F: include/linux/atmppp.h
PPP OVER ETHERNET
P: Michal Ostrowski
M: mostrows@earthlink.net
S: Maintained
+F: drivers/net/pppoe.c
+F: drivers/net/pppox.c
PPP OVER L2TP
P: James Chapman
M: jchapman@katalix.com
S: Maintained
+F: drivers/net/pppol2tp.c
+F: include/linux/if_pppol2tp.h
PREEMPTIBLE KERNEL
P: Robert Love
L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
+F: Documentation/preempt-locking.txt
+F: include/linux/preempt.h
PRISM54 WIRELESS DRIVER
P: Luis R. Rodriguez
L: linux-wireless@vger.kernel.org
W: http://prism54.org
S: Maintained
+F: drivers/net/wireless/prism54/
PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
P: Peter Denison
M: mikpe@it.uu.se
L: linux-ide@vger.kernel.org
S: Maintained
+F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
P: Masakazu Mokuno
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
S: Supported
+F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
P: Geoff Levand
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
S: Supported
+F: arch/powerpc/boot/ps3*
+F: arch/powerpc/include/asm/lv1call.h
+F: arch/powerpc/include/asm/ps3*.h
+F: arch/powerpc/platforms/ps3/
+F: drivers/*/ps3*
+F: drivers/ps3/
+F: drivers/rtc/rtc-ps3.c
+F: drivers/usb/host/*ps3.c
+F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
P: Jim Paris
L: cbe-oss-dev@ozlabs.org
S: Maintained
+PTRACE SUPPORT
+P: Roland McGrath
+M: roland@redhat.com
+P: Oleg Nesterov
+M: oleg@redhat.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: include/asm-generic/syscall.h
+F: include/linux/ptrace.h
+F: include/linux/regset.h
+F: include/linux/tracehook.h
+F: kernel/ptrace.c
+
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
L: pvrusb2@isely.net (subscribers-only)
L: linux-media@vger.kernel.org
W: http://www.isely.net/pvrusb2/
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: Documentation/video4linux/README.pvrusb2
+F: drivers/media/video/pvrusb2/
PXA2xx/PXA3xx SUPPORT
P: Eric Miao
M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mach-pxa/
+F: drivers/pcmcia/pxa2xx*
+F: drivers/spi/pxa2xx*
+F: drivers/usb/gadget/pxa2*
+F: include/sound/pxa2xx-lib.h
+F: sound/soc/pxa/pxa2xx*
PXA168 SUPPORT
P: Eric Miao
P: Jason Chagas
M: jason.chagas@marvell.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Supported
PXA910 SUPPORT
P: Eric Miao
M: eric.miao@marvell.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-T: git kernel.org:/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
S: Supported
PXA MMCI DRIVER
M: linux-driver@qlogic.com
L: linux-scsi@vger.kernel.org
S: Supported
+F: Documentation/scsi/LICENSE.qla2xxx
+F: drivers/scsi/qla2xxx/
QLOGIC QLA3XXX NETWORK DRIVER
P: Ron Mercer
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
+F: Documentation/networking/LICENSE.qla3xxx
+F: drivers/net/qla3xxx.*
QLOGIC QLGE 10Gb ETHERNET DRIVER
P: Ron Mercer
M: ron.mercer@qlogic.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/qlge/
QNX4 FILESYSTEM
P: Anders Larsen
L: linux-kernel@vger.kernel.org
W: http://www.alarsen.net/linux/qnx4fs/
S: Maintained
+F: fs/qnx4/
+F: include/linux/qnx4_fs.h
+F: include/linux/qnxtypes.h
RADEON FRAMEBUFFER DISPLAY DRIVER
P: Benjamin Herrenschmidt
M: benh@kernel.crashing.org
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/aty/radeon*
+F: include/linux/radeonfb.h
RAGE128 FRAMEBUFFER DISPLAY DRIVER
P: Paul Mackerras
M: paulus@samba.org
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/aty/aty128fb.c
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
L: users@rt2x00.serialmonkey.com
W: http://rt2x00.serialmonkey.com/
S: Maintained
-T: git kernel.org:/pub/scm/linux/kernel/git/ivd/rt2x00.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
F: drivers/net/wireless/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER
P: Nick Piggin
M: npiggin@suse.de
S: Maintained
+F: Documentation/blockdev/ramdisk.txt
+F: drivers/block/brd.c
RANDOM NUMBER DRIVER
P: Matt Mackall
M: mpm@selenic.com
S: Maintained
+F: drivers/char/random.c
RAPIDIO SUBSYSTEM
P: Matt Porter
M: mporter@kernel.crashing.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/rapidio/
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
P: Corey Thomas
M: coreythomas@charter.net
L: linux-wireless@vger.kernel.org
S: Maintained
+F: drivers/net/wireless/ray*
RCUTORTURE MODULE
P: Josh Triplett
M: josh@freedesktop.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/RCU/torture.txt
+F: kernel/rcutorture.c
RDC R-321X SoC
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
P: Andy Grover
M: andy.grover@oracle.com
L: rds-devel@oss.oracle.com
S: Supported
+F: net/rds/
READ-COPY UPDATE (RCU)
P: Dipankar Sarma
W: http://www.rdrop.com/users/paulmck/rclock/
L: linux-kernel@vger.kernel.org
S: Supported
+F: Documentation/RCU/rcu.txt
+F: Documentation/RCU/rcuref.txt
+F: include/linux/rcupdate.h
+F: include/linux/srcu.h
+F: kernel/rcupdate.c
REAL TIME CLOCK DRIVER
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/rtc.txt
+F: drivers/rtc/
+F: include/linux/rtc.h
REAL TIME CLOCK (RTC) SUBSYSTEM
P: Alessandro Zummo
M: a.zummo@towertech.it
L: rtc-linux@googlegroups.com
S: Maintained
+F: Documentation/rtc.txt
+F: drivers/rtc/
+F: include/linux/rtc.h
REISERFS FILE SYSTEM
L: reiserfs-devel@vger.kernel.org
S: Supported
+F: fs/reiserfs/
RFKILL
P: Ivo van Doorn
M: IvDoorn@gmail.com
L: netdev@vger.kernel.org
S: Maintained
-F: net/rfkill
+F Documentation/rfkill.txt
+F: net/rfkill/
RISCOM8 DRIVER
S: Orphan
+F: Documentation/serial/riscom8.txt
+F: drivers/char/riscom8*
ROCKETPORT DRIVER
P: Comtrol Corp.
W: http://www.comtrol.com
S: Maintained
+F: Documentation/serial/rocket.txt
+F: drivers/char/rocket*
ROSE NETWORK LAYER
P: Ralf Baechle
L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
+F: include/linux/rose.h
+F: include/net/rose.h
+F: net/rose/
RTL8180 WIRELESS DRIVER
P: John W. Linville
M: linville@tuxdriver.com
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
+F: drivers/net/wireless/rtl818*
RTL8187 WIRELESS DRIVER
-P: Herton Ronaldo Krzesinski
-M: herton@mandriva.com.br
-P: Hin-Tak Leung
-M htl10@users.sourceforge.net
-P: Larry Finger
-M: Larry.Finger@lwfinger.net
-L: linux-wireless@vger.kernel.org
-W: http://linuxwireless.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git
-S: Maintained
+P: Herton Ronaldo Krzesinski
+M: herton@mandriva.com.br
+P: Hin-Tak Leung
+M: htl10@users.sourceforge.net
+P: Larry Finger
+M: Larry.Finger@lwfinger.net
+L: linux-wireless@vger.kernel.org
+W: http://linuxwireless.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S: Maintained
+F: drivers/net/wireless/rtl818x/rtl8187*
S3 SAVAGE FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/savage/
S390
P: Martin Schwidefsky
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
+F: arch/s390/
S390 NETWORK DRIVERS
P: Ursula Braun
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
+F: drivers/s390/net/
S390 ZCRYPT DRIVER
P: Felix Beck
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
S: Supported
+F: drivers/s390/crypto/
S390 ZFCP DRIVER
P: Christof Schmitt
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
+F: Documentation/s390/zfcpdump.txt
+F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER
P: Ursula Braun
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
+F: drivers/s390/net/*iucv*
+F: include/net/iucv/
+F: net/iucv/
S3C24XX SD/MMC Driver
P: Ben Dooks
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
L: linux-kernel@vger.kernel.org
S: Supported
+F: drivers/mmc/host/s3cmci.*
SAA7146 VIDEO4LINUX-2 DRIVER
P: Michael Hunold
M: michael@mihu.de
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.mihu.de/linux/saa7146
S: Maintained
+F: drivers/media/common/saa7146*
+F: drivers/media/video/*7146*
+F: include/media/*7146*
SC1200 WDT DRIVER
P: Zwane Mwaikambo
M: zwane@arm.linux.org.uk
S: Maintained
+F: drivers/watchdog/sc1200wdt.c
SCHEDULER
P: Ingo Molnar
M: mingo@elte.hu
-P: Robert Love [the preemptible kernel bits]
-M: rml@tech9.net
+P: Peter Zijlstra
+M: peterz@infradead.org
L: linux-kernel@vger.kernel.org
S: Maintained
+F: kernel/sched*
+F: include/linux/sched.h
SCSI CDROM DRIVER
P: Jens Axboe
L: linux-scsi@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
+F: drivers/scsi/sr*
SCSI SG DRIVER
P: Doug Gilbert
L: linux-scsi@vger.kernel.org
W: http://www.torque.net/sg
S: Maintained
+F: drivers/scsi/sg.c
+F: include/scsi/sg.h
SCSI SUBSYSTEM
P: James E.J. Bottomley
M: James.Bottomley@HansenPartnership.com
L: linux-scsi@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
-T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
-T: git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-pending-2.6.git
S: Maintained
+F: drivers/scsi/
+F: include/scsi/
SCSI TAPE DRIVER
P: Kai Mäkisara
M: Kai.Makisara@kolumbus.fi
L: linux-scsi@vger.kernel.org
S: Maintained
+F: Documentation/scsi/st.txt
+F: drivers/scsi/st*
SCTP PROTOCOL
P: Vlad Yasevich
L: linux-sctp@vger.kernel.org
W: http://lksctp.sourceforge.net
S: Supported
+F: Documentation/networking/sctp.txt
+F: include/linux/sctp.h
+F: include/net/sctp/
+F: net/sctp/
SCx200 CPU SUPPORT
P: Jim Cromie
M: jim.cromie@gmail.com
S: Odd Fixes
+F: Documentation/i2c/busses/scx200_acb
+F: arch/x86/kernel/scx200_32.c
+F: drivers/watchdog/scx200_wdt.c
+F: drivers/i2c/busses/scx200*
+F: drivers/mtd/maps/scx200_docflash.c
+F: include/linux/scx200.h
SCx200 GPIO DRIVER
P: Jim Cromie
M: jim.cromie@gmail.com
S: Maintained
+F: drivers/char/scx200_gpio.c
+F: include/linux/scx200_gpio.h
SCx200 HRT CLOCKSOURCE DRIVER
P: Jim Cromie
M: jim.cromie@gmail.com
S: Maintained
+F: drivers/clocksource/scx200_hrt.c
SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
P: Sascha Sommer
M: saschasommer@freenet.de
L: sdricohcs-devel@lists.sourceforge.net (subscribers-only)
S: Maintained
+F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
P: Pierre Ossman
-M: drzeus-sdhci@drzeus.cx
+M: pierre@ossman.eu
L: sdhci-devel@lists.ossman.eu
S: Maintained
L: linuxppc-dev@ozlabs.org
L: sdhci-devel@lists.ossman.eu
S: Maintained
+F: drivers/mmc/host/sdhci.*
SECURITY SUBSYSTEM
-F: security/
P: James Morris
M: jmorris@namei.org
L: linux-kernel@vger.kernel.org
L: linux-security-module@vger.kernel.org (suggested Cc:)
-T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
W: http://security.wiki.kernel.org/
S: Supported
+F: security/
SECURITY CONTACT
P: Security Officers
P: Eric Paris
M: eparis@parisplace.org
L: linux-kernel@vger.kernel.org (kernel issues)
-L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
+L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
-T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
S: Supported
+F: include/linux/selinux*
+F: security/selinux/
SENSABLE PHANTOM
P: Jiri Slaby
M: jirislaby@gmail.com
S: Maintained
+F: drivers/misc/phantom.c
+F: include/linux/phantom.h
SERIAL ATA (SATA) SUBSYSTEM
P: Jeff Garzik
M: jgarzik@pobox.com
L: linux-ide@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
S: Supported
+F: drivers/ata/
+F: include/linux/ata.h
+F: include/linux/libata.h
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
P: Sathya Perla
M: sathyap@serverengines.com
-P: Subbu Seetharaman
-M: subbus@serverengines.com
-L: netdev@vger.kernel.org
-W: http://www.serverengines.com
-S: Supported
+P: Subbu Seetharaman
+M: subbus@serverengines.com
+L: netdev@vger.kernel.org
+W: http://www.serverengines.com
+S: Supported
+F: drivers/net/benet/
SFC NETWORK DRIVER
P: Steve Hodgson
P: Robert Stonehouse
M: linux-net-drivers@solarflare.com
S: Supported
+F: drivers/net/sfc/
SGI GRU DRIVER
P: Jack Steiner
M: steiner@sgi.com
S: Maintained
+F: drivers/misc/sgi-gru/
SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
P: Pat Gefre
M: pfg@sgi.com
L: linux-ia64@vger.kernel.org
S: Supported
+F: Documentation/ia64/serial.txt
+F: drivers/serial/ioc?_serial.c
+F: include/linux/ioc?.h
SGI VISUAL WORKSTATION 320 AND 540
P: Andrey Panin
L: linux-visws-devel@lists.sf.net
W: http://linux-visws.sf.net
S: Maintained for 2.6.
+F: Documentation/sgi-visws.txt
SGI XP/XPC/XPNET DRIVER
-P: Dean Nelson
-M: dcn@sgi.com
+P: Robin Holt
+M: holt@sgi.com
S: Maintained
+F: drivers/misc/sgi-xp/
SHARP LH SUPPORT (LH7952X & LH7A40X)
P: Marc Singer
W: http://projects.buici.com/arm
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen
+F: arch/arm/mach-lh7a40x/
+F: drivers/serial/serial_lh7a40x.c
+F: drivers/usb/gadget/lh7a40*
+F: drivers/usb/host/ohci-lh7a40*
SHPC HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: linux-pci@vger.kernel.org
S: Supported
+F: drivers/pci/hotplug/shpchp*
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
M: support@simtec.co.uk
W: http://www.simtec.co.uk/products/EB110ATX/
S: Supported
+F: arch/arm/mach-ebsa110/
SIMTEC EB2410ITX (BAST)
P: Ben Dooks
M: support@simtec.co.uk
W: http://www.simtec.co.uk/products/EB2410ITX/
S: Supported
+F: arch/arm/mach-s3c2410/
+F: drivers/*/*s3c2410*
+F: drivers/*/*/*s3c2410*
SIS 190 ETHERNET DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/sis190.c
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
W: http://www.brownhat.org/sis900.html
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/sis900.*
SIS 96X I2C/SMBUS DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
L: linux-i2c@vger.kernel.org
S: Maintained
+F: Documentation/i2c/busses/i2c-sis96x
+F: drivers/i2c/busses/i2c-sis96x.c
SIS FRAMEBUFFER DRIVER
P: Thomas Winischhofer
M: thomas@winischhofer.net
W: http://www.winischhofer.net/linuxsisvga.shtml
S: Maintained
+F: Documentation/fb/sisfb.txt
+F: drivers/video/sis/
+F: include/video/sisfb.h
SIS USB2VGA DRIVER
P: Thomas Winischhofer
M: thomas@winischhofer.net
W: http://www.winischhofer.at/linuxsisusbvga.shtml
S: Maintained
+F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
P: Stephen Hemminger
M: shemminger@linux-foundation.org
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/skge.*
+F: drivers/net/sky2.*
SLAB ALLOCATOR
P: Christoph Lameter
M: mpm@selenic.com
L: linux-mm@kvack.org
S: Maintained
+F: include/linux/sl?b*.h
+F: mm/sl?b.c
SMC91x ETHERNET DRIVER
P: Nicolas Pitre
M: nico@cam.org
S: Maintained
+F: drivers/net/smc91x.*
SMSC47B397 HARDWARE MONITOR DRIVER
P: Mark M. Hoffman
M: mhoffman@lightlink.com
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/smsc47b397
+F: drivers/hwmon/smsc47b397.c
SMSC911x ETHERNET DRIVER
P: Steve Glendinning
M: steve.glendinning@smsc.com
L: netdev@vger.kernel.org
S: Supported
+F: include/linux/smsc911x.h
+F: drivers/net/smsc911x.*
SMSC9420 PCI ETHERNET DRIVER
P: Steve Glendinning
M: steve.glendinning@smsc.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/smsc9420.*
SMX UIO Interface
P: Ben Nizette
M: bn@niasdigital.com
S: Maintained
+F: drivers/uio/uio_smx.c
SN-IA64 (Itanium) SUB-PLATFORM
P: Jes Sorensen
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
S: Maintained
+F: arch/ia64/sn/
SOC-CAMERA V4L2 SUBSYSTEM
P: Guennadi Liakhovetski
M: g.liakhovetski@gmx.de
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
S: Maintained
+F: include/media/v4l2*
+F: drivers/media/video/v4l2*
SOEKRIS NET48XX LED SUPPORT
P: Chris Boot
M: bootc@bootc.net
S: Maintained
+F: drivers/leds/leds-net48xx.c
SOFTWARE RAID (Multiple Disks) SUPPORT
P: Neil Brown
M: neilb@suse.de
L: linux-raid@vger.kernel.org
S: Supported
+F: drivers/md/
+F: include/linux/raid/
SONIC NETWORK DRIVER
P: Thomas Bogendoerfer
M: tsbogend@alpha.franken.de
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/sonic.*
SONICS SILICON BACKPLANE DRIVER (SSB)
P: Michael Buesch
M: mb@bu3sch.de
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/ssb/
+F: include/linux/ssb/
SONY VAIO CONTROL DEVICE DRIVER
P: Mattia Dongili
L: linux-acpi@vger.kernel.org
W: http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
S: Maintained
+F: Documentation/laptops/sony-laptop.txt
+F: drivers/char/sonypi.c
+F: drivers/platform/x86/sony-laptop.c
+F: include/linux/sony-laptop.h
SONY MEMORYSTICK CARD SUPPORT
P: Alex Dubov
L: linux-kernel@vger.kernel.org
W: http://tifmxx.berlios.de/
S: Maintained
+F: drivers/memstick/host/tifm_ms.c
SOUND
P: Jaroslav Kysela
P: Takashi Iwai
M: tiwai@suse.de
L: alsa-devel@alsa-project.org (subscribers-only)
+W: http://www.alsa-project.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained
+F: Documentation/sound/
+F: include/sound/
+F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
P: Liam Girdwood
M: lrg@slimlogic.co.uk
P: Mark Brown
M: broonie@opensource.wolfsonmicro.com
-T: git opensource.wolfsonmicro.com/linux-2.6-asoc
+T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc
L: alsa-devel@alsa-project.org (subscribers-only)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
+F: sound/soc/
SPARC + UltraSPARC (sparc/sparc64)
P: David S. Miller
M: davem@davemloft.net
L: sparclinux@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
-T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
S: Maintained
+F: arch/sparc/
SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
P: Roger Wolff
M: R.E.Wolff@BitWizard.nl
-L: linux-kernel@vger.kernel.org ?
+L: linux-kernel@vger.kernel.org
S: Supported
+F: Documentation/serial/specialix.txt
+F: drivers/char/specialix*
SPI SUBSYSTEM
P: David Brownell
M: dbrownell@users.sourceforge.net
L: spi-devel-general@lists.sourceforge.net
S: Maintained
+F: Documentation/spi/
+F: drivers/spi/
+F: include/linux/spi/
SPIDERNET NETWORK DRIVER for CELL
P: Ishizaki Kou
M: jens@de.ibm.com
L: netdev@vger.kernel.org
S: Supported
+F: Documentation/networking/spider_net.txt
+F: drivers/net/spider_net*
SPU FILE SYSTEM
P: Jeremy Kerr
L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
+F: Documentation/filesystems/spufs.txt
+F: arch/powerpc/platforms/cell/spufs/
SQUASHFS FILE SYSTEM
P: Phillip Lougher
L: squashfs-devel@lists.sourceforge.net (subscribers-only)
W: http://squashfs.org.uk
S: Maintained
+F: Documentation/filesystems/squashfs.txt
+F: fs/squashfs/
SRM (Alpha) environment access
P: Jan-Benedict Glaw
M: jbglaw@lug-owl.de
L: linux-kernel@vger.kernel.org
S: Maintained
+F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
P: Greg Kroah-Hartman
L: linux-kernel@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
+F: drivers/staging/
STARFIRE/DURALAN NETWORK DRIVER
P: Ion Badulescu
M: ionut@cs.columbia.edu
S: Maintained
+F: drivers/net/starfire*
STARMODE RADIO IP (STRIP) PROTOCOL DRIVER
W: http://mosquitonet.Stanford.EDU/strip.html
S: Orphan
+F: drivers/net/wireless/strip.c
+F: include/linux/if_strip.h
STRADIS MPEG-2 DECODER DRIVER
P: Nathan Laredo
M: laredo@gnu.org
W: http://www.stradis.com/
S: Maintained
+F: drivers/media/video/stradis.c
SUN3/3X
P: Sam Creasey
M: sammy@sammy.net
W: http://sammy.net/sun3/
S: Maintained
+F: arch/m68k/kernel/*sun3*
+F: arch/m68k/sun3*/
+F: arch/m68k/include/asm/sun3*
SUPERH
P: Paul Mundt
M: lethal@linux-sh.org
L: linux-sh@vger.kernel.org
W: http://www.linux-sh.org
-T: git kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
S: Supported
+F: Documentation/sh/
+F: arch/sh/
+F: drivers/sh/
SUSPEND TO RAM
P: Len Brown
M: rjw@sisk.pl
L: linux-pm@lists.linux-foundation.org
S: Supported
+F: Documentation/power/
+F: arch/x86/kernel/acpi/
+F: drivers/base/power/
+F: kernel/power/
+F: include/linux/suspend.h
+F: include/linux/freezer.h
+F: include/linux/pm.h
SVGA HANDLING
P: Martin Mares
M: mj@ucw.cz
L: linux-video@atrey.karlin.mff.cuni.cz
S: Maintained
+F: Documentation/svga.txt
+F: arch/x86/boot/video*
SYSV FILESYSTEM
P: Christoph Hellwig
M: hch@infradead.org
S: Maintained
+F: Documentation/filesystems/sysv-fs.txt
+F: fs/sysv/
+F: include/linux/sysv_fs.h
TASKSTATS STATISTICS INTERFACE
P: Balbir Singh
M: balbir@linux.vnet.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/accounting/taskstats*
+F: include/linux/taskstats*
+F: kernel/taskstats.c
TC CLASSIFIER
P: Jamal Hadi Salim
M: hadi@cyberus.ca
L: netdev@vger.kernel.org
S: Maintained
+F: include/linux/pkt_cls.h
+F: include/net/pkt_cls.h
+F: net/sched/
TCP LOW PRIORITY MODULE
P: Wong Hoi Sing, Edison
M: hlhung3i@gmail.com
W: http://tcp-lp-mod.sourceforge.net/
S: Maintained
+F: net/ipv4/tcp_lp.c
TEHUTI ETHERNET DRIVER
P: Alexander Indenbaum
M: andy@greyhouse.net
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/tehuti*
Telecom Clock Driver for MCPL0010
P: Mark Gross
M: mark.gross@intel.com
S: Supported
+F: drivers/char/tlclk.c
TENSILICA XTENSA PORT (xtensa)
P: Chris Zankel
M: chris@zankel.net
S: Maintained
+F: arch/xtensa/
THINKPAD ACPI EXTRAS DRIVER
P: Henrique de Moraes Holschuh
L: ibm-acpi-devel@lists.sourceforge.net
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
-T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
+T: git git://repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
S: Maintained
+F: drivers/platform/x86/thinkpad_acpi.c
TI FLASH MEDIA INTERFACE DRIVER
P: Alex Dubov
M: oakad@yahoo.com
S: Maintained
+F: drivers/misc/tifm*
+F: drivers/mmc/host/tifm_sd.c
+F: include/linux/tifm.h
TI OMAP MMC INTERFACE DRIVER
P: Carlos Aguiar, Anderson Briglia and Syed Khasim
W: http://linux.omap.com
W: http://www.muru.com/linux/omap/
S: Maintained
+F: drivers/mmc/host/omap.c
TI OMAP RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
S: Maintained
+F: drivers/char/hw_random/omap-rng.c
TIPC NETWORK LAYER
P: Per Liden
L: tipc-discussion@lists.sourceforge.net
W: http://tipc.sourceforge.net/
W: http://tipc.cslab.ericsson.net/
-T: git tipc.cslab.ericsson.net:/pub/git/tipc.git
+T: git git://tipc.cslab.ericsson.net/pub/git/tipc.git
S: Maintained
+F: include/linux/tipc*.h
+F: include/net/tipc/
+F: net/tipc/
TLAN NETWORK DRIVER
P: Samuel Chessman
L: tlan-devel@lists.sourceforge.net (subscribers-only)
W: http://sourceforge.net/projects/tlan/
S: Maintained
+F: Documentation/networking/tlan.txt
+F: drivers/net/tlan.*
TOMOYO SECURITY MODULE
P: Kentaro Takeda
W: http://tomoyo.sourceforge.jp/
T: quilt http://svn.sourceforge.jp/svnroot/tomoyo/trunk/2.2.x/tomoyo-lsm/patches/
S: Maintained
+F: security/tomoyo/
TOSHIBA ACPI EXTRAS DRIVER
S: Orphan
+F: drivers/platform/x86/toshiba_acpi.c
TOSHIBA SMM DRIVER
P: Jonathan Buzzard
L: tlinux-users@tce.toshiba-dme.co.jp
W: http://www.buzzard.org.uk/toshiba/
S: Maintained
+F: drivers/char/toshiba.c
+F: include/linux/toshiba.h
TMIO MMC DRIVER
P: Ian Molton
M: ian@mnementh.co.uk
S: Maintained
+F: drivers/mmc/host/tmio_mmc.*
+
+TMPFS (SHMEM FILESYSTEM)
+P: Hugh Dickins
+M: hugh.dickins@tiscali.co.uk
+L: linux-mm@kvack.org
+S: Maintained
+F: include/linux/shmem_fs.h
+F: mm/shmem.c
TPM DEVICE DRIVER
P: Debora Velarde
W: http://www.sirrix.com
L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/char/tpm/
TRIVIAL PATCHES
P: Jiri Kosina
M: trivial@kernel.org
L: linux-kernel@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jikos/trivial.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
S: Maintained
TTY LAYER
M: kyle@mcmartin.ca
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/tulip/
TUN/TAP driver
P: Maxim Krasnyansky
L: vtun@office.satix.net
W: http://vtun.sourceforge.net/tun
S: Maintained
+F: Documentation/networking/tuntap.txt
+F: arch/um/os-Linux/drivers/
TURBOCHANNEL SUBSYSTEM
P: Maciej W. Rozycki
M: macro@linux-mips.org
S: Maintained
+F: drivers/tc/
+F: include/linux/tc.h
U14-34F SCSI DRIVER
P: Dario Ballabio
M: ballabio_dario@emc.com
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/u14-34f.c
UBI FILE SYSTEM (UBIFS)
P: Artem Bityutskiy
T: git git://git.infradead.org/ubifs-2.6.git
W: http://www.linux-mtd.infradead.org/doc/ubifs.html
S: Maintained
+F: Documentation/filesystems/ubifs.txt
+F: fs/ubifs/
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
W: http://www.uclinux.org/
L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
+F: arch/m68knommu/
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
P: Yoshinori Sato
M: ysato@users.sourceforge.jp
W: http://uclinux-h8.sourceforge.jp/
M: jack@suse.cz
W: http://linux-udf.sourceforge.net
S: Maintained
+F: Documentation/filesystems/udf.txt
+F: fs/udf/
UFS FILESYSTEM
P: Evgeniy Dushistov
M: dushistov@mail.ru
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/ufs.txt
+F: fs/ufs/
ULTRA-WIDEBAND (UWB) SUBSYSTEM:
P: David Vrabel
M: david.vrabel@csr.com
L: linux-usb@vger.kernel.org
S: Supported
+F: drivers/uwb/*
+F: include/linux/uwb.h
+F: include/linux/uwb/
UNIFORM CDROM DRIVER
P: Jens Axboe
L: linux-kernel@vger.kernel.org
W: http://www.kernel.dk
S: Maintained
+F: Documentation/cdrom/
+F: drivers/cdrom/cdrom.c
+F: include/linux/cdrom.h
UNSORTED BLOCK IMAGES (UBI)
P: Artem Bityutskiy
L: linux-mtd@lists.infradead.org
T: git git://git.infradead.org/ubi-2.6.git
S: Maintained
+F: drivers/mtd/ubi/
+F: include/linux/mtd/ubi.h
+F: include/mtd/ubi-user.h
USB ACM DRIVER
P: Oliver Neukum
M: oliver@neukum.name
L: linux-usb@vger.kernel.org
S: Maintained
+F: Documentation/usb/acm.txt
+F: drivers/usb/class/cdc-acm.*
USB BLOCK DRIVER (UB ub)
P: Pete Zaitcev
L: linux-kernel@vger.kernel.org
L: linux-usb@vger.kernel.org
S: Supported
+F: drivers/block/ub.c
USB CDC ETHERNET DRIVER
P: Greg Kroah-Hartman
L: linux-usb@vger.kernel.org
S: Maintained
W: http://www.kroah.com/linux-usb/
+F: drivers/net/usb/cdc_*.c
+F: include/linux/usb/cdc.h
USB CYPRESS C67X00 DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/c67x00/
USB DAVICOM DM9601 DRIVER
P: Peter Korsgaard
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
+F: drivers/net/usb/dm9601.c
USB DIAMOND RIO500 DRIVER
P: Cesar Miquel
L: rio500-users@lists.sourceforge.net
W: http://rio500.sourceforge.net
S: Maintained
+F: drivers/usb/misc/rio500*
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-usb@vger.kernel.org
S: Odd Fixes
+F: Documentation/usb/ehci.txt
+F: drivers/usb/host/ehci*
USB ET61X[12]51 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
+F: drivers/media/video/et61x251/
USB GADGET/PERIPHERAL SUBSYSTEM
P: David Brownell
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org/gadget
S: Maintained
+F: drivers/usb/gadget/
+F: include/linux/usb/gadget*
USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
P: Jiri Kosina
M: jkosina@suse.cz
L: linux-usb@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/jikos/hid.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
S: Maintained
+F: Documentation/usb/hiddev.txt
+F: drivers/hid/usbhid/
USB ISP116X DRIVER
P: Olav Kongas
M: ok@artecdesign.ee
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/host/isp116x*
+F: include/linux/usb/isp116x.h
USB KAWASAKI LSI DRIVER
P: Oliver Neukum
M: oliver@neukum.name
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/serial/kl5kusb105.*
USB MASS STORAGE DRIVER
P: Matthew Dharm
L: usb-storage@lists.one-eyed-alien.net
S: Maintained
W: http://www.one-eyed-alien.net/~mdharm/linux-usb/
+F: drivers/usb/storage/
USB OHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-usb@vger.kernel.org
S: Odd Fixes
+F: Documentation/usb/ohci.txt
+F: drivers/usb/host/ohci*
USB OPTION-CARD DRIVER
P: Matthias Urlichs
M: smurf@smurf.noris.de
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/serial/option.c
USB OV511 DRIVER
P: Mark McClelland
L: linux-usb@vger.kernel.org
W: http://alpha.dyndns.org/ov511/
S: Maintained
+F: drivers/media/video/ov511.*
USB PEGASUS DRIVER
P: Petko Manolov
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
+F: drivers/net/usb/pegasus.*
USB PRINTER DRIVER (usblp)
P: Pete Zaitcev
M: zaitcev@redhat.com
L: linux-usb@vger.kernel.org
S: Supported
+F: drivers/usb/class/usblp.c
USB RTL8150 DRIVER
P: Petko Manolov
L: netdev@vger.kernel.org
W: http://pegasus2.sourceforge.net/
S: Maintained
+F: drivers/net/usb/rtl8150.c
USB SE401 DRIVER
P: Jeroen Vreeken
L: linux-usb@vger.kernel.org
W: http://www.chello.nl/~j.vreeken/se401/
S: Maintained
+F: Documentation/video4linux/se401.txt
+F: drivers/media/video/se401.*
USB SERIAL BELKIN F5U103 DRIVER
P: William Greathouse
M: wgreathouse@smva.com
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/serial/belkin_sa.*
USB SERIAL CYPRESS M8 DRIVER
P: Lonnie Mendez
S: Maintained
W: http://geocities.com/i0xox0i
W: http://firstlight.net/cvs
+F: drivers/usb/serial/cypress_m8.*
USB SERIAL CYBERJACK DRIVER
P: Matthias Bruestle and Harald Welte
M: support@reiner-sct.com
W: http://www.reiner-sct.de/support/treiber_cyberjack.php
S: Maintained
+F: drivers/usb/serial/cyberjack.c
USB SERIAL DIGI ACCELEPORT DRIVER
P: Peter Berger and Al Borchers
M: alborchers@steinerpoint.com
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
P: Greg Kroah-Hartman
M: gregkh@suse.de
L: linux-usb@vger.kernel.org
S: Supported
+F: Documentation/usb/usb-serial.txt
+F: drivers/usb/serial/generic.c
+F: drivers/usb/serial/usb-serial.c
+F: include/linux/usb/serial.h
USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
P: Gary Brubaker
M: xavyer@ix.netcom.com
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
P: Greg Kroah-Hartman
L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
+F: drivers/usb/serial/*keyspan*
USB SERIAL WHITEHEAT DRIVER
P: Support Department
L: linux-usb@vger.kernel.org
W: http://www.connecttech.com
S: Supported
+F: drivers/usb/serial/whiteheat*
USB SMSC95XX ETHERNET DRIVER
P: Steve Glendinning
M: steve.glendinning@smsc.com
L: netdev@vger.kernel.org
S: Supported
+F: drivers/net/usb/smsc95xx.*
USB SN9C1xx DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
+F: Documentation/video4linux/sn9c102.txt
+F: drivers/media/video/sn9c102/
USB SUBSYSTEM
P: Greg Kroah-Hartman
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Supported
+F: Documentation/usb/
+F: drivers/net/usb/
+F: drivers/usb/
+F: include/linux/usb.h
+F: include/linux/usb/
USB UHCI DRIVER
P: Alan Stern
M: stern@rowland.harvard.edu
L: linux-usb@vger.kernel.org
S: Maintained
+F: drivers/usb/host/uhci*
USB "USBNET" DRIVER FRAMEWORK
P: David Brownell
L: netdev@vger.kernel.org
W: http://www.linux-usb.org/usbnet
S: Maintained
+F: drivers/net/usb/usbnet.c
+F: include/linux/usb/usbnet.h
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://linux-uvc.berlios.de
S: Maintained
+F: drivers/media/video/uvc/
USB W996[87]CF DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
+F: Documentation/video4linux/w9968cf.txt
+F: drivers/media/video/w996*
USB WIRELESS RNDIS DRIVER (rndis_wlan)
P: Jussi Kivilinna
M: jussi.kivilinna@mbnet.fi
L: linux-wireless@vger.kernel.org
S: Maintained
+F: drivers/net/wireless/rndis_wlan.c
USB ZC0301 DRIVER
P: Luca Risolia
M: luca.risolia@studio.unibo.it
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://www.linux-projects.org
S: Maintained
+F: Documentation/video4linux/zc0301.txt
+F: drivers/media/video/zc0301/
USB ZD1201 DRIVER
P: Jeroen Vreeken
L: linux-usb@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Maintained
+F: drivers/net/wireless/zd1201.*
USB ZR364XX DRIVER
P: Antoine Jacquet
M: royale@zerezo.com
L: linux-usb@vger.kernel.org
L: linux-media@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
W: http://royale.zerezo.com/zr364xx/
S: Maintained
+F: Documentation/video4linux/zr364xx.txt
+F: drivers/media/video/zr364xx.c
USER-MODE LINUX (UML)
P: Jeff Dike
L: user-mode-linux-user@lists.sourceforge.net
W: http://user-mode-linux.sourceforge.net
S: Maintained
+F: Documentation/uml/
+F: arch/um/
+F: fs/hostfs/
+F: fs/hppfs/
USERSPACE I/O (UIO)
P: Hans J. Koch
M: gregkh@suse.de
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/DocBook/uio-howto.tmpl
+F: drivers/uio/
+F: include/linux/uio*.h
UTIL-LINUX-NG PACKAGE
P: Karel Zak
M: kzak@redhat.com
L: util-linux-ng@vger.kernel.org
W: http://kernel.org/~kzak/util-linux-ng/
-T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+T: git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
S: Maintained
UVESAFB DRIVER
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://dev.gentoo.org/~spock/projects/uvesafb/
S: Maintained
+F: Documentation/fb/uvesafb.txt
+F: drivers/video/uvesafb.*
VFAT/FAT/MSDOS FILESYSTEM
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
L: linux-kernel@vger.kernel.org
S: Maintained
+F: Documentation/filesystems/vfat.txt
+F: fs/fat/
VIA RHINE NETWORK DRIVER
P: Roger Luethi
M: rl@hellgate.ch
S: Maintained
+F: drivers/net/via-rhine.c
VIAPRO SMBUS DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: linux-i2c@vger.kernel.org
S: Maintained
+F: Documentation/i2c/busses/i2c-viapro
+F: drivers/i2c/busses/i2c-viapro.c
VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
P: Joseph Chan
M: ScottFang@viatech.com.cn
L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
S: Maintained
+F: drivers/video/via/
VIA VELOCITY NETWORK DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
L: netdev@vger.kernel.org
S: Maintained
-
-VIDEO FOR LINUX (V4L)
-P: Mauro Carvalho Chehab
-M: mchehab@infradead.org
-L: linux-media@vger.kernel.org
-W: http://linuxtv.org
-T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
-S: Maintained
+F: drivers/net/via-velocity.*
VLAN (802.1Q)
P: Patrick McHardy
M: kaber@trash.net
L: netdev@vger.kernel.org
S: Maintained
+F: drivers/net/macvlan.c
+F: include/linux/if_*vlan.h
+F: net/8021q/
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
P: Liam Girdwood
M: broonie@opensource.wolfsonmicro.com
W: http://opensource.wolfsonmicro.com/node/15
W: http://www.slimlogic.co.uk/?p=48
-T: git kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
S: Supported
+F: drivers/regulator/
+F: include/linux/regulator/
VT1211 HARDWARE MONITOR DRIVER
P: Juerg Haefliger
M: juergh@gmail.com
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/vt1211
+F: drivers/hwmon/vt1211.c
VT8231 HARDWARE MONITOR DRIVER
P: Roger Lucas
M: vt8231@hiddenengine.co.uk
L: lm-sensors@lm-sensors.org
S: Maintained
+F: drivers/hwmon/vt8231.c
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
S: Maintained
+F: Documentation/w1/
+F: drivers/w1/
W83791D HARDWARE MONITORING DRIVER
P: Marc Hulsman
M: m.hulsman@tudelft.nl
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/w83791d
+F: drivers/hwmon/w83791d.c
W83793 HARDWARE MONITORING DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
L: lm-sensors@lm-sensors.org
S: Maintained
+F: Documentation/hwmon/w83793
+F: drivers/hwmon/w83793.c
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
-M: drzeus-wbsd@drzeus.cx
+M: pierre@ossman.eu
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/mmc/host/wbsd.*
WATCHDOG DEVICE DRIVERS
P: Wim Van Sebroeck
M: wim@iguana.be
-T: git kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
S: Maintained
+F: Documentation/watchdog/
+F: drivers/watchdog/
+F: include/linux/watchdog.h
WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
P: Jean Tourrilhes
L: linux-wireless@vger.kernel.org
W: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
S: Maintained
+F: Documentation/networking/wavelan.txt
+F: drivers/net/wireless/wavelan*
WD7000 SCSI DRIVER
P: Miroslav Zagorac
M: zaga@fly.cc.fer.hr
L: linux-scsi@vger.kernel.org
S: Maintained
+F: drivers/scsi/wd7000.c
WIMAX STACK
P: Inaky Perez-Gonzalez
P: David Vrabel
M: david.vrabel@csr.com
S: Maintained
+F: include/linux/wlp.h
+F: drivers/uwb/wlp/
WISTRON LAPTOP BUTTON DRIVER
P: Miloslav Trmac
M: mitr@volny.cz
S: Maintained
+F: drivers/input/misc/wistron_btns.c
WL3501 WIRELESS PCMCIA CARD DRIVER
P: Arnaldo Carvalho de Melo
L: linux-wireless@vger.kernel.org
W: http://oops.ghostprotocols.net:81/blog
S: Maintained
+F: drivers/net/wireless/wl3501*
WM97XX TOUCHSCREEN DRIVERS
P: Mark Brown
T: git git://opensource.wolfsonmicro.com/linux-2.6-touch
W: http://opensource.wolfsonmicro.com/node/7
S: Supported
+F: drivers/input/touchscreen/*wm97*
+F: include/linux/wm97xx.h
X.25 NETWORK LAYER
P: Henner Eisen
M: eis@baty.hanse.de
L: linux-x25@vger.kernel.org
S: Maintained
+F: Documentation/networking/x25*
+F: include/net/x25*
+F: net/x25/
X86 ARCHITECTURE (32-BIT AND 64-BIT)
P: Thomas Gleixner
M: hpa@zytor.com
M: x86@kernel.org
L: linux-kernel@vger.kernel.org
-T: git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
S: Maintained
+F: Documentation/x86/
+F: arch/x86/
XEN HYPERVISOR INTERFACE
P: Jeremy Fitzhardinge
L: virtualization@lists.osdl.org
L: xen-devel@lists.xensource.com
S: Supported
+F: arch/x86/xen/
+F: drivers/*/xen-*front.c
+F: drivers/xen/
+F: arch/x86/include/asm/xen/
+F: include/xen/
XFS FILESYSTEM
P: Silicon Graphics Inc
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
-T: git://oss.sgi.com/xfs/xfs.git
+T: git git://oss.sgi.com/xfs/xfs.git
S: Supported
+F: Documentation/filesystems/xfs.txt
+F: fs/xfs/
XILINX SYSTEMACE DRIVER
P: Grant Likely
W: http://www.secretlab.ca/
L: linux-kernel@vger.kernel.org
S: Maintained
+F: drivers/block/xsysace.c
XILINX UARTLITE SERIAL DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
L: linux-serial@vger.kernel.org
S: Maintained
+F: drivers/serial/uartlite.c
YAM DRIVER FOR AX.25
P: Jean-Paul Roubelat
M: jpr@f6fbb.org
L: linux-hams@vger.kernel.org
S: Maintained
+F: drivers/net/hamradio/yam*
+F: include/linux/yam.h
YEALINK PHONE DRIVER
P: Henk Vergonet
M: Henk.Vergonet@gmail.com
L: usbb2k-api-dev@nongnu.org
S: Maintained
+F: Documentation/input/yealink.txt
+F: drivers/input/misc/yealink.*
Z8530 DRIVER FOR AX.25
P: Joerg Reuter
W: http://www.qsl.net/dl1bke/
L: linux-hams@vger.kernel.org
S: Maintained
+F: Documentation/networking/z8530drv.txt
+F: drivers/net/hamradio/*scc.c
+F: drivers/net/hamradio/z8530.h
ZD1211RW WIRELESS DRIVER
P: Daniel Drake
L: linux-wireless@vger.kernel.org
L: zd1211-devs@lists.sourceforge.net (subscribers-only)
S: Maintained
+F: drivers/net/wireless/zd1211rw/
ZR36067 VIDEO FOR LINUX DRIVER
L: mjpeg-users@lists.sourceforge.net
W: http://mjpeg.sourceforge.net/driver-zoran/
T: Mercurial http://linuxtv.org/hg/v4l-dvb
S: Odd Fixes
+F: drivers/media/video/zoran/
ZS DECSTATION Z85C30 SERIAL DRIVER
P: Maciej W. Rozycki
M: macro@linux-mips.org
S: Maintained
+F: drivers/serial/zs.*
THE REST
P: Linus Torvalds
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
S: Buried alive in reporters
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc1
-NAME = Temporary Tasmanian Devil
+EXTRAVERSION =
+NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
- -e s/sh.*/sh/ )
+ -e s/sh[234].*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
SRCARCH := sparc
endif
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+ SRCARCH := sh
+endif
+
# Where to locate arch specific headers
hdr-arch := $(SRCARCH)
include $(srctree)/arch/$(SRCARCH)/Makefile
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
# disable pointer signed / unsigned warnings in gcc 4.0
KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
-# disable invalid "can't wrap" optimzations for signed / pointers
+# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fwrapv)
# revert to pre-gcc-4.4 behaviour of .eh_frame
LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
+ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
+LDFLAGS_vmlinux += -X
+endif
+
# Default kernel image to build when no specific target is given.
# KBUILD_IMAGE may be overruled on the command line or
# set in the environment
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2 usr/include
+MRPROPER_DIRS += include/config include2 usr/include include/generated
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
- @echo ' prepare - Set up for building external modules'
+ @echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+ $(KBUILD_EXTMOD)/Module.markers \
+ $(KBUILD_EXTMOD)/modules.order
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
FORCE:
# Declare the contents of the .PHONY variable as phony. We keep that
-# information in a variable se we can use it in if_changed and friends.
+# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)
config HAVE_DMA_API_DEBUG
bool
+
+config HAVE_DEFAULT_NO_SPIN_MUTEXES
+ bool
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
+#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
+#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ __ASM_SMP_MB \
+ "1: ldl_l %0,0(%2)\n" \
+ insn \
+ "2: stl_c %1,0(%2)\n" \
+ " beq %1,4f\n" \
+ " mov $31,%1\n" \
+ "3: .subsection 2\n" \
+ "4: br 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .long 1b-.\n" \
+ " lda $31,3b-1b(%1)\n" \
+ " .long 2b-.\n" \
+ " lda $31,3b-2b(%1)\n" \
+ " .previous\n" \
+ : "=&r" (oldval), "=&r"(ret) \
+ : "r" (uaddr), "r"(oparg) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int prev, cmp;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ __ASM_SMP_MB
+ "1: ldl_l %0,0(%2)\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,3f\n"
+ " mov %4,%1\n"
+ "2: stl_c %1,0(%2)\n"
+ " beq %1,4f\n"
+ "3: .subsection 2\n"
+ "4: br 1b\n"
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .long 1b-.\n"
+ " lda $31,3b-1b(%0)\n"
+ " .long 2b-.\n"
+ " lda $31,3b-2b(%0)\n"
+ " .previous\n"
+ : "=&r"(prev), "=&r"(cmp)
+ : "r"(uaddr), "r"((long)oldval), "r"(newval)
+ : "memory");
+
+ return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
+
#include <linux/compiler.h>
#include <linux/threads.h>
+#include <linux/percpu-defs.h>
/*
* Determine the real variable name from the name visible in the
#endif /* SMP */
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
#endif /* __ALPHA_PERCPU_H */
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
- alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+ alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
+ifdef CONFIG_BINFMT_AOUT
+obj-y += binfmt_loader.o
+endif
+
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
static int __init init_loader_binfmt(void)
{
- return register_binfmt(&loader_format);
+ return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);
}
void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
}
void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
- printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+ printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);
}
void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
}
void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
}
void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
* the kernel global pointer and jump to the kernel entry-point.
*/
+#include <linux/init.h>
#include <asm/system.h>
#include <asm/asm-offsets.h>
-.section .text.head, "ax"
+__HEAD
.globl swapper_pg_dir
.globl _stext
swapper_pg_dir=SWAPPER_PGD
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);
}
}
-static void
+static int
dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
+
+ return 0;
}
-static void
+static int
clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
+
+ return 0;
}
static struct hw_interrupt_type dp264_irq_type = {
}
-static void
+static int
titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
{
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
titan_update_irq_hw(titan_cached_irq_mask);
spin_unlock(&titan_irq_lock);
+
+ return 0;
}
static void
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*/
#include <linux/module.h>
+#include <linux/sort.h>
#include <asm/uaccess.h>
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+ return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+ struct exception_table_entry *ex_a = a, *ex_b = b;
+ unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+ unsigned int t = ex_a->fixup.unit;
+
+ ex_a->fixup.unit = ex_b->fixup.unit;
+ ex_b->fixup.unit = t;
+ ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+ ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+ const struct exception_table_entry *x = a, *y = b;
+
+ /* avoid overflow */
+ if (ex_to_addr(x) > ex_to_addr(y))
+ return 1;
+ if (ex_to_addr(x) < ex_to_addr(y))
+ return -1;
+ return 0;
+}
+
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
+ sort(start, finish - start, sizeof(struct exception_table_entry),
+ cmp_ex, swap_ex);
}
const struct exception_table_entry *
unsigned long mid_value;
mid = (last - first) / 2 + first;
- mid_value = (unsigned long)&mid->insn + mid->insn;
+ mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
This enables support for the Cirrus EP93xx series of CPUs.
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
+ select HAVE_IDE
+ select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 && !SMP
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
endmenu
source "arch/arm/common/Kconfig"
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default y
- depends on FLATMEM
+ default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
If in doubt, say N.
-config CPU_FREQ_PXA
- bool
- depends on CPU_FREQ && ARCH_PXA && PXA25x
- default y
- select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
endif
source "drivers/cpuidle/Kconfig"
}
#ifdef CONFIG_SMP
-static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
+static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
{
void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
unsigned int shift = (irq % 4) * 8;
val |= 1 << (cpu + shift);
writel(val, reg);
spin_unlock(&irq_controller_lock);
+
+ return 0;
}
#endif
}
#ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
- unsigned long map = *cpus_addr(cpumask);
+ unsigned long map = *cpus_addr(*mask);
/* this always happens on GIC0 */
writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
-
if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar 3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
CONFIG_RTC_DRV_SA1100=y
# CONFIG_RTC_DRV_PXA is not set
# CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+CONFIG_REGULATOR_BQ24022=y
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:22:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
#
# Bus support
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 11:11:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
+
+#
+# Freescale MXC Implementations
+#
+CONFIG_ARCH_MX1=y
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX3 is not set
+
+#
+# MX1 platforms:
+#
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 10:18:06 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_MACH_MX21 is not set
+CONFIG_MACH_MX27=y
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX27ADS=y
+CONFIG_MACH_PCM038=y
+CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 14:23:39 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_MX31LITE=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 11:06:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+CONFIG_ARCH_MX3=y
+CONFIG_ARCH_MX31=y
+
+#
+# MX3 platforms:
+#
+CONFIG_MACH_MX31ADS=y
+CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=y
+CONFIG_MFD_WM8350_CONFIG_MODE_0=y
+CONFIG_MFD_WM8352_CONFIG_MODE_0=y
+CONFIG_MFD_WM8350_I2C=y
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_MX3=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_MX3=y
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MX3_IPU=y
+CONFIG_MX3_IPU_IRQS=4
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_WM8350=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 25 11:52:42 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_PCM037=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-CONFIG_SMSC911X=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_MARKERS=y
-CONFIG_OPROFILE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-# CONFIG_MACH_MX27ADS is not set
-CONFIG_MACH_PCM038=y
-CONFIG_MACH_PCM970_BASEBOARD=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-
-#
-# SPI Protocol Masters
-#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_DRV_PCF8563=y
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-
-#
-# SPI RTC drivers
-#
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul 7 16:59:23 2008
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_DCLK=y
CONFIG_CPU_S3C244X=y
-# CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=128
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_GPIO_EXTRA128=y
CONFIG_PM_SIMTEC=y
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_SMDK=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2410=y
# Boot options
#
# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DEV_HSMMC=y
#
# S3C2400 Machines
CONFIG_CPU_S3C2410_DMA=y
CONFIG_S3C2410_PM=y
CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
CONFIG_SIMTEC_NOR=y
CONFIG_MACH_BAST_IDE=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
CONFIG_BAST_PC104_IRQ=y
-# CONFIG_MACH_TCT_HAMMER is not set
+CONFIG_MACH_TCT_HAMMER=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_QT2410=y
CONFIG_CPU_S3C2412=y
#
# S3C2412 Machines
#
-# CONFIG_MACH_JIVE is not set
+CONFIG_MACH_JIVE=y
+# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
CONFIG_MACH_SMDK2413=y
CONFIG_MACH_S3C2413=y
-# CONFIG_MACH_SMDK2412 is not set
+CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2440=y
CONFIG_S3C2440_DMA=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
#
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_PLATFORM=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_HAVE_PATA_PLATFORM=y
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-# CONFIG_ENC28J60 is not set
CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# Input device support
#
CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
#
# Hardware I/O ports
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2412=y
CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ELEKTOR is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_GPIO=m
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_S3C24XX=m
CONFIG_SPI_S3C24XX_GPIO=m
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
-# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+#
+# PCI GPIO expanders:
+#
+
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_AU0828=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+# CONFIG_DVB_USB_A800 is not set
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+# CONFIG_DVB_USB_DIGITV is not set
+# CONFIG_DVB_USB_VP7045 is not set
+# CONFIG_DVB_USB_VP702X is not set
+# CONFIG_DVB_USB_GP8PSK is not set
+# CONFIG_DVB_USB_NOVA_T_USB2 is not set
+# CONFIG_DVB_USB_TTUSB2 is not set
+# CONFIG_DVB_USB_DTT200U is not set
+# CONFIG_DVB_USB_OPERA1 is not set
+CONFIG_DVB_USB_AF9005=m
+# CONFIG_DVB_USB_AF9005_REMOTE is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
#
# Graphics support
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3C2410_DEBUG is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
#
# Display device support
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C_I2SV2_SOC=m
+CONFIG_SND_S3C2412_SOC_I2S=m
+CONFIG_SND_S3C2443_SOC_AC97=m
+CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
+CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
+CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# USB Input Devices
#
# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
#
-# USB HID Boot Protocol drivers
+# Special HID drivers
#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_HID_APPLE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
+CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_H1940=m
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation
.align 3; \
.long 9999b,9001f; \
.previous
+
+/*
+ * SMP data memory barrier
+ */
+ .macro smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+ dmb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
+#endif
+ .endm
: "cc");
}
+static inline void atomic_add(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_add\n"
+"1: ldrex %0, [%2]\n"
+" add %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_add_return\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_sub\n"
+"1: ldrex %0, [%2]\n"
+" sub %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_sub_return\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
{
unsigned long oldval, res;
+ smp_mb();
+
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
: "cc");
} while (res);
+ smp_mb();
+
return oldval;
}
return val;
}
+#define atomic_add(i, v) (void) atomic_add_return(i, v)
static inline int atomic_sub_return(int i, atomic_t *v)
{
return val;
}
+#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i, v) (void) atomic_add_return(i, v)
-#define atomic_inc(v) (void) atomic_add_return(1, v)
-#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
-#define atomic_dec(v) (void) atomic_sub_return(1, v)
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic_dec(v) atomic_sub(1, v)
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
+#define smp_mb__before_atomic_dec() smp_mb()
+#define smp_mb__after_atomic_dec() smp_mb()
+#define smp_mb__before_atomic_inc() smp_mb()
+#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic.h>
#endif
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
#endif
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
-#define R_ARM_NONE 0
-#define R_ARM_PC24 1
-#define R_ARM_ABS32 2
-#define R_ARM_CALL 28
-#define R_ARM_JUMP24 29
-#define R_ARM_V4BX 40
-#define R_ARM_PREL31 42
+#define R_ARM_NONE 0
+#define R_ARM_PC24 1
+#define R_ARM_ABS32 2
+#define R_ARM_CALL 28
+#define R_ARM_JUMP24 29
+#define R_ARM_V4BX 40
+#define R_ARM_PREL31 42
+#define R_ARM_MOVW_ABS_NC 43
+#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
-/* An odd number of words will be pushed after this alignment, so
- deliberately misalign the value. */
-#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
#endif
#endif
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
#include <asm-generic/page.h>
#endif
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
+#define SZ_32K 0x00008000
#define SZ_64K 0x00010000
#define SZ_128K 0x00020000
#define SZ_256K 0x00040000
/*
* Raise an IPI cross call on CPUs in callmap.
*/
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
/*
* Broadcast a clock event to other CPUs.
*/
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
/*
* Boot a secondary CPU, and assign it the specified idle task.
extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* Local timer interrupt handling function (can be IPI'ed).
unsigned int tmp;
#endif
+ smp_mb();
+
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
case 1:
__bad_xchg(ptr, size), ret = 0;
break;
}
+ smp_mb();
return ret;
}
#include <asm-generic/cmpxchg-local.h>
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
#include <asm-generic/cmpxchg.h>
#endif
+#else /* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long oldval, res;
+
+ switch (size) {
+#ifdef CONFIG_CPU_32v6K
+ case 1:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexb %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexbeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ case 2:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexh %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexheq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+#endif /* CONFIG_CPU_32v6K */
+ case 4:
+ do {
+ asm volatile("@ __cmpxchg4\n"
+ " ldrex %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ default:
+ __bad_cmpxchg(ptr, size);
+ oldval = 0;
+ }
+
+ return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ smp_mb();
+ ret = __cmpxchg(ptr, old, new, size);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ switch (size) {
+#ifndef CONFIG_CPU_32v6K
+ case 1:
+ case 2:
+ ret = __cmpxchg_local_generic(ptr, old, new, size);
+ break;
+#endif /* !CONFIG_CPU_32v6K */
+ default:
+ ret = __cmpxchg(ptr, old, new, size);
+ }
+
+ return ret;
+}
+
+#define cmpxchg_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ register unsigned long long oldval asm("r0");
+ register unsigned long long __old asm("r2") = old;
+ register unsigned long long __new asm("r4") = new;
+ unsigned long res;
+
+ do {
+ asm volatile(
+ " @ __cmpxchg8\n"
+ " ldrexd %1, %H1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " teqeq %H1, %H3\n"
+ " strexdeq %0, %4, %H4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (__old), "r" (__new)
+ : "memory", "cc");
+ } while (res);
+
+ return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ unsigned long long ret;
+
+ smp_mb();
+ ret = __cmpxchg64(ptr, old, new);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg64(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#else /* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* CONFIG_CPU_32v6K */
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
struct mmu_gather {
struct mm_struct *mm;
unsigned int fullmm;
+ unsigned long range_start;
+ unsigned long range_end;
};
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
put_cpu_var(mmu_gathers);
}
-#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+ if (!tlb->fullmm) {
+ if (addr < tlb->range_start)
+ tlb->range_start = addr;
+ if (addr + PAGE_SIZE > tlb->range_end)
+ tlb->range_end = addr + PAGE_SIZE;
+ }
+}
/*
* In the case of tlb vma handling, we can optimise these away in the
static inline void
tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm)
+ if (!tlb->fullmm) {
flush_cache_range(vma, vma->vm_start, vma->vm_end);
+ tlb->range_start = TASK_SIZE;
+ tlb->range_end = 0;
+ }
}
static inline void
tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm)
- flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+ if (!tlb->fullmm && tlb->range_end > 0)
+ flush_tlb_range(vma, tlb->range_start, tlb->range_end);
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
+#define __NR_preadv (__NR_SYSCALL_BASE+361)
+#define __NR_pwritev (__NR_SYSCALL_BASE+362)
/*
* The following SWIs are ARM private.
CALL(sys_dup3)
CALL(sys_pipe2)
/* 360 */ CALL(sys_inotify_init1)
+ CALL(sys_preadv)
+ CALL(sys_pwritev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+ /*
+ * If we have support for OABI programs, we can never allow NX
+ * support - our signal syscall restart mechanism relies upon
+ * being able to execute code placed on the user stack.
+ */
+ return 1;
+#else
return 0;
+#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
*/
__kuser_memory_barrier: @ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ smp_dmb
usr_ret lr
.align 5
*(u32 *)loc = offset & 0x7fffffff;
break;
+ case R_ARM_MOVW_ABS_NC:
+ case R_ARM_MOVT_ABS:
+ offset = *(u32 *)loc;
+ offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+ offset = (offset ^ 0x8000) - 0x8000;
+
+ offset += sym->st_value;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u32 *)loc &= 0xfff0f000;
+ *(u32 *)loc |= ((offset & 0xf000) << 4) |
+ (offset & 0x0fff);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
per_cpu(cpu_data, cpu).idle = current;
}
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
{
unsigned long flags;
unsigned int cpu;
local_irq_save(flags);
- for_each_cpu_mask(cpu, callmap) {
+ for_each_cpu(cpu, mask) {
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
spin_lock(&ipi->lock);
/*
* Call the platform specific cross-CPU call function.
*/
- smp_cross_call(callmap);
+ smp_cross_call(mask);
local_irq_restore(flags);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_CALL_FUNC);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+ send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
}
void show_ipi_list(struct seq_file *p)
void smp_send_reschedule(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+ send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
-void smp_send_timer(void)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
- send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_TIMER);
}
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
- send_ipi_message(mask, IPI_CPU_STOP);
+ send_ipi_message(&mask, IPI_CPU_STOP);
}
/*
return -EINVAL;
}
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+ const struct cpumask *mask)
{
- int ret = 0;
-
preempt_disable();
- ret = smp_call_function_mask(mask, func, info, wait);
- if (cpu_isset(smp_processor_id(), mask))
+ smp_call_function_many(mask, func, info, wait);
+ if (cpumask_test_cpu(smp_processor_id(), mask))
func(info);
preempt_enable();
-
- return ret;
}
/**********************************************************************/
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t mask = mm->cpu_vm_mask;
-
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
{
- cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = uaddr;
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_page(unsigned long kaddr)
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = start;
ta.ta_end = end;
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
#include <linux/net.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
struct oldabi_stat64 {
unsigned long long st_dev;
int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_oldabi_stat64(&stat, statbuf);
}
struct oabi_flock64 {
mov r2, #1
add r1, r1, r0, lsr #3 @ Get byte offset
mov r3, r2, lsl r3 @ create mask
+ smp_dmb
1: ldrexb r2, [r1]
ands r0, r2, r3 @ save old value of bit
\instr r2, r2, r3 @ toggle bit
strexb ip, r2, [r1]
cmp ip, #0
bne 1b
+ smp_dmb
cmp r0, #0
movne r0, #1
2: mov pc, lr
.handler = at91rm9200_timer_interrupt
};
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
}
* Clocksource: just a monotonic counter of MCK/16 cycles.
* We don't care whether or not PIT irqs are enabled.
*/
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
{
unsigned long flags;
u32 elapsed;
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
- u8 vbus_pin[]; /* port power-control pin */
+ u8 vbus_pin[2]; /* port power-control pin */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
comment "DaVinci Core Type"
-config ARCH_DAVINCI644x
- default y
+config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
- bool "TI DaVinci EVM"
+ bool "TI DM644x EVM"
default y
- depends on ARCH_DAVINCI644x
+ depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
- for development is a DaVinci EVM
+ for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+ bool "DAVINCI multiplexing support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ Pin multiplexing support for DAVINCI boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config DAVINCI_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_DAVINCI
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
endmenu
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o mux.o devices.o usb.o
+ gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX) += mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
--- /dev/null
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/etherdevice.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/i2c/at24.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
+
+#define DM644X_EVM_PHY_MASK (0x2)
+#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+#define DAVINCI_CFC_ATA_BASE 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
+#define LXT971_PHY_ID (0x001378e2)
+#define LXT971_PHY_MASK (0xfffffff0)
+
+static struct mtd_partition davinci_evm_norflash_partitions[] = {
+ /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 5 * SZ_64K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next 1 sectors */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_64K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct physmap_flash_data davinci_evm_norflash_data = {
+ .width = 2,
+ .parts = davinci_evm_norflash_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
+};
+
+/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+ * limits addresses to 16M, so using addresses past 16M will wrap */
+static struct resource davinci_evm_norflash_resource = {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device davinci_evm_norflash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_norflash_data,
+ },
+ .num_resources = 1,
+ .resource = &davinci_evm_norflash_resource,
+};
+
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+ /* Bootloader layout depends on whose u-boot is installed, but we
+ * can hide all the details.
+ * - block 0 for u-boot environment ... in mainline u-boot
+ * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+ * - blocks 6...? for u-boot
+ * - blocks 16..23 for u-boot environment ... in TI's u-boot
+ */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K + SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* Kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ /* File system (older GIT kernels started this on the 5MB mark) */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash BBT ... created by TI's CCS
+ * using flashwriter_nand.out, but ignored by TI's versions of
+ * Linux and u-boot. We boot faster by using them.
+ */
+};
+
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+ .parts = davinci_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
+ .resource = davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+ .name = "rtc_davinci_evm",
+ .id = -1,
+};
+
+static struct resource ide_resources[] = {
+ {
+ .start = DAVINCI_CFC_ATA_BASE,
+ .end = DAVINCI_CFC_ATA_BASE + 0x7ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_IDE,
+ .end = IRQ_IDE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+ .name = "palm_bk3710",
+ .id = -1,
+ .resource = ide_resources,
+ .num_resources = ARRAY_SIZE(ide_resources),
+ .dev = {
+ .dma_mask = &ide_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * I2C GPIO expanders
+ */
+
+#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
+
+
+/* U2 -- LEDs */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS8", .active_low = 1,
+ .default_trigger = "heartbeat", },
+ { .name = "DS7", .active_low = 1, },
+ { .name = "DS6", .active_low = 1, },
+ { .name = "DS5", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS2", .active_low = 1,
+ .default_trigger = "mmc0", },
+ { .name = "DS1", .active_low = 1,
+ .default_trigger = "ide-disk", },
+};
+
+static const struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int
+evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ }
+
+ /* what an extremely annoying way to be forced to handle
+ * device unregistration ...
+ */
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev,
+ &evm_led_data, sizeof evm_led_data);
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int
+evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u2 = {
+ .gpio_base = PCF_Uxx_BASE(0),
+ .setup = evm_led_setup,
+ .teardown = evm_led_teardown,
+};
+
+
+/* U18 - A/V clock generator and user switch */
+
+static int sw_gpio;
+
+static ssize_t
+sw_show(struct device *d, struct device_attribute *a, char *buf)
+{
+ char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
+
+ strcpy(buf, s);
+ return strlen(s);
+}
+
+static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
+
+static int
+evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ int status;
+
+ /* export dip switch option */
+ sw_gpio = gpio + 7;
+ status = gpio_request(sw_gpio, "user_sw");
+ if (status == 0)
+ status = gpio_direction_input(sw_gpio);
+ if (status == 0)
+ status = device_create_file(&client->dev, &dev_attr_user_sw);
+ else
+ gpio_free(sw_gpio);
+ if (status != 0)
+ sw_gpio = -EINVAL;
+
+ /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
+ gpio_request(gpio + 3, "pll_fs2");
+ gpio_direction_output(gpio + 3, 0);
+
+ gpio_request(gpio + 2, "pll_fs1");
+ gpio_direction_output(gpio + 2, 0);
+
+ gpio_request(gpio + 1, "pll_sr");
+ gpio_direction_output(gpio + 1, 0);
+
+ return 0;
+}
+
+static int
+evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 3);
+
+ if (sw_gpio > 0) {
+ device_remove_file(&client->dev, &dev_attr_user_sw);
+ gpio_free(sw_gpio);
+ }
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u18 = {
+ .gpio_base = PCF_Uxx_BASE(1),
+ .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
+ .setup = evm_u18_setup,
+ .teardown = evm_u18_teardown,
+};
+
+
+/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
+
+static int
+evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ /* p0 = nDRV_VBUS (initial: don't supply it) */
+ gpio_request(gpio + 0, "nDRV_VBUS");
+ gpio_direction_output(gpio + 0, 1);
+
+ /* p1 = VDDIMX_EN */
+ gpio_request(gpio + 1, "VDDIMX_EN");
+ gpio_direction_output(gpio + 1, 1);
+
+ /* p2 = VLYNQ_EN */
+ gpio_request(gpio + 2, "VLYNQ_EN");
+ gpio_direction_output(gpio + 2, 1);
+
+ /* p3 = n3V3_CF_RESET (initial: stay in reset) */
+ gpio_request(gpio + 3, "nCF_RESET");
+ gpio_direction_output(gpio + 3, 0);
+
+ /* (p4 unused) */
+
+ /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
+ gpio_request(gpio + 5, "WLAN_RESET");
+ gpio_direction_output(gpio + 5, 1);
+
+ /* p6 = nATA_SEL (initial: select) */
+ gpio_request(gpio + 6, "nATA_SEL");
+ gpio_direction_output(gpio + 6, 0);
+
+ /* p7 = nCF_SEL (initial: deselect) */
+ gpio_request(gpio + 7, "nCF_SEL");
+ gpio_direction_output(gpio + 7, 1);
+
+ /* irlml6401 switches over 1A, in under 8 msec;
+ * now it can be managed by nDRV_VBUS ...
+ */
+ setup_usb(500, 8);
+
+ return 0;
+}
+
+static int
+evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+{
+ gpio_free(gpio + 7);
+ gpio_free(gpio + 6);
+ gpio_free(gpio + 5);
+ gpio_free(gpio + 3);
+ gpio_free(gpio + 2);
+ gpio_free(gpio + 1);
+ gpio_free(gpio + 0);
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data_u35 = {
+ .gpio_base = PCF_Uxx_BASE(2),
+ .setup = evm_u35_setup,
+ .teardown = evm_u35_teardown,
+};
+
+/*----------------------------------------------------------------------*/
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
+ * - ... newer boards may have more
+ */
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+ DECLARE_MAC_BUF(mac_str);
+ char mac_addr[6];
+
+ at24_mem_acc = mem_acc;
+
+ /* Read MAC addr from EEPROM */
+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+ printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+ print_mac(mac_str, mac_addr));
+ }
+}
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = at24_setup,
+};
+
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more. It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ dm6446evm_msp = client;
+ return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+ dm6446evm_msp = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+ { "dm6446evm_msp", 0, },
+ { /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+ .driver.name = "dm6446evm_msp",
+ .id_table = dm6446evm_msp_ids,
+ .probe = dm6446evm_msp_probe,
+ .remove = dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+ static const char txbuf[2] = { 2, 4, };
+ char buf[4];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = (void __force *)txbuf,
+ },
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = I2C_M_RD,
+ .len = 4,
+ .buf = buf,
+ },
+ };
+ int status;
+
+ if (!dm6446evm_msp)
+ return -ENXIO;
+
+ /* Command 4 == get input state, returns port 2 and port3 data
+ * S Addr W [A] len=2 [A] cmd=4 [A]
+ * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+ */
+ status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+ if (status < 0)
+ return status;
+
+ dev_dbg(&dm6446evm_msp->dev,
+ "PINS: %02x %02x %02x %02x\n",
+ buf[0], buf[1], buf[2], buf[3]);
+
+ return (buf[3] << 8) | buf[2];
+}
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x38),
+ .platform_data = &pcf_data_u2,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x39),
+ .platform_data = &pcf_data_u18,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574", 0x3a),
+ .platform_data = &pcf_data_u35,
+ },
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ /* ALSO:
+ * - tvl320aic33 audio codec (0x1b)
+ * - tvp5146 video decoder (0x5d)
+ */
+};
+
+/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
+ * which requires 100 usec of idle bus after i2c writes sent to it.
+ */
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_add_driver(&dm6446evm_msp_driver);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &davinci_fb_device,
+ &rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init
+davinci_evm_map_io(void)
+{
+ davinci_map_common_io();
+ dm644x_init();
+}
+
+static int davinci_phy_fixup(struct phy_device *phydev)
+{
+ unsigned int control;
+ /* CRITICAL: Fix for increasing PHY signal drive strength for
+ * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+ * signal strength was low causing TX to fail randomly. The
+ * fix is to Set bit 11 (Increased MII drive strength) of PHY
+ * register 26 (Digital Config register) on this phy. */
+ control = phy_read(phydev, 26);
+ phy_write(phydev, 26, (control | 0x800));
+ return 0;
+}
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+ defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || \
+ defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
+#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+ defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
+#endif
+
+static __init void davinci_evm_init(void)
+{
+ struct clk *aemif_clk;
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND || HAS_NOR)
+ pr_warning("WARNING: both IDE and Flash are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable IDE for NAND/NOR support.\n");
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN);
+ davinci_cfg_reg(DM644X_HDIREN);
+ platform_device_register(&ide_dev);
+ } else if (HAS_NAND || HAS_NOR) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND) {
+ platform_device_register(&davinci_evm_nandflash_device);
+ evm_leds[7].default_trigger = "nand-disk";
+ if (HAS_NOR)
+ pr_warning("WARNING: both NAND and NOR flash "
+ "are enabled; disable one of them.\n");
+ } else if (HAS_NOR)
+ platform_device_register(&davinci_evm_norflash_device);
+ }
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+
+ davinci_serial_init(&uart_config);
+
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+
+}
+
+static __init void davinci_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
+ /* Maintainer: MontaVista Software <source@mvista.com> */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_evm_map_io,
+ .init_irq = davinci_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_evm_init,
+MACHINE_END
+++ /dev/null
-/*
- * TI DaVinci EVM board support
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/i2c/at24.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/i2c.h>
-
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
-
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
-
-static struct mtd_partition davinci_evm_norflash_partitions[] = {
- /* bootloader (U-Boot, etc) in first 4 sectors */
- {
- .name = "bootloader",
- .offset = 0,
- .size = 4 * SZ_64K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next 1 sectors */
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_64K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct physmap_flash_data davinci_evm_norflash_data = {
- .width = 2,
- .parts = davinci_evm_norflash_partitions,
- .nr_parts = ARRAY_SIZE(davinci_evm_norflash_partitions),
-};
-
-/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
- * limits addresses to 16M, so using addresses past 16M will wrap */
-static struct resource davinci_evm_norflash_resource = {
- .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
- .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device davinci_evm_norflash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &davinci_evm_norflash_data,
- },
- .num_resources = 1,
- .resource = &davinci_evm_norflash_resource,
-};
-
-#endif
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-
-static struct resource ide_resources[] = {
- {
- .start = DAVINCI_CFC_ATA_BASE,
- .end = DAVINCI_CFC_ATA_BASE + 0x7ff,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = IRQ_IDE,
- .end = IRQ_IDE,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 ide_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device ide_dev = {
- .name = "palm_bk3710",
- .id = -1,
- .resource = ide_resources,
- .num_resources = ARRAY_SIZE(ide_resources),
- .dev = {
- .dma_mask = &ide_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-#endif
-
-/*----------------------------------------------------------------------*/
-
-/*
- * I2C GPIO expanders
- */
-
-#define PCF_Uxx_BASE(x) (DAVINCI_N_GPIO + ((x) * 8))
-
-
-/* U2 -- LEDs */
-
-static struct gpio_led evm_leds[] = {
- { .name = "DS8", .active_low = 1,
- .default_trigger = "heartbeat", },
- { .name = "DS7", .active_low = 1, },
- { .name = "DS6", .active_low = 1, },
- { .name = "DS5", .active_low = 1, },
- { .name = "DS4", .active_low = 1, },
- { .name = "DS3", .active_low = 1, },
- { .name = "DS2", .active_low = 1,
- .default_trigger = "mmc0", },
- { .name = "DS1", .active_low = 1,
- .default_trigger = "ide-disk", },
-};
-
-static const struct gpio_led_platform_data evm_led_data = {
- .num_leds = ARRAY_SIZE(evm_leds),
- .leds = evm_leds,
-};
-
-static struct platform_device *evm_led_dev;
-
-static int
-evm_led_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- struct gpio_led *leds = evm_leds;
- int status;
-
- while (ngpio--) {
- leds->gpio = gpio++;
- leds++;
- }
-
- /* what an extremely annoying way to be forced to handle
- * device unregistration ...
- */
- evm_led_dev = platform_device_alloc("leds-gpio", 0);
- platform_device_add_data(evm_led_dev,
- &evm_led_data, sizeof evm_led_data);
-
- evm_led_dev->dev.parent = &client->dev;
- status = platform_device_add(evm_led_dev);
- if (status < 0) {
- platform_device_put(evm_led_dev);
- evm_led_dev = NULL;
- }
- return status;
-}
-
-static int
-evm_led_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- if (evm_led_dev) {
- platform_device_unregister(evm_led_dev);
- evm_led_dev = NULL;
- }
- return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u2 = {
- .gpio_base = PCF_Uxx_BASE(0),
- .setup = evm_led_setup,
- .teardown = evm_led_teardown,
-};
-
-
-/* U18 - A/V clock generator and user switch */
-
-static int sw_gpio;
-
-static ssize_t
-sw_show(struct device *d, struct device_attribute *a, char *buf)
-{
- char *s = gpio_get_value_cansleep(sw_gpio) ? "on\n" : "off\n";
-
- strcpy(buf, s);
- return strlen(s);
-}
-
-static DEVICE_ATTR(user_sw, S_IRUGO, sw_show, NULL);
-
-static int
-evm_u18_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- int status;
-
- /* export dip switch option */
- sw_gpio = gpio + 7;
- status = gpio_request(sw_gpio, "user_sw");
- if (status == 0)
- status = gpio_direction_input(sw_gpio);
- if (status == 0)
- status = device_create_file(&client->dev, &dev_attr_user_sw);
- else
- gpio_free(sw_gpio);
- if (status != 0)
- sw_gpio = -EINVAL;
-
- /* audio PLL: 48 kHz (vs 44.1 or 32), single rate (vs double) */
- gpio_request(gpio + 3, "pll_fs2");
- gpio_direction_output(gpio + 3, 0);
-
- gpio_request(gpio + 2, "pll_fs1");
- gpio_direction_output(gpio + 2, 0);
-
- gpio_request(gpio + 1, "pll_sr");
- gpio_direction_output(gpio + 1, 0);
-
- return 0;
-}
-
-static int
-evm_u18_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- gpio_free(gpio + 1);
- gpio_free(gpio + 2);
- gpio_free(gpio + 3);
-
- if (sw_gpio > 0) {
- device_remove_file(&client->dev, &dev_attr_user_sw);
- gpio_free(sw_gpio);
- }
- return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u18 = {
- .gpio_base = PCF_Uxx_BASE(1),
- .n_latch = (1 << 3) | (1 << 2) | (1 << 1),
- .setup = evm_u18_setup,
- .teardown = evm_u18_teardown,
-};
-
-
-/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
-
-static int
-evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- /* p0 = nDRV_VBUS (initial: don't supply it) */
- gpio_request(gpio + 0, "nDRV_VBUS");
- gpio_direction_output(gpio + 0, 1);
-
- /* p1 = VDDIMX_EN */
- gpio_request(gpio + 1, "VDDIMX_EN");
- gpio_direction_output(gpio + 1, 1);
-
- /* p2 = VLYNQ_EN */
- gpio_request(gpio + 2, "VLYNQ_EN");
- gpio_direction_output(gpio + 2, 1);
-
- /* p3 = n3V3_CF_RESET (initial: stay in reset) */
- gpio_request(gpio + 3, "nCF_RESET");
- gpio_direction_output(gpio + 3, 0);
-
- /* (p4 unused) */
-
- /* p5 = 1V8_WLAN_RESET (initial: stay in reset) */
- gpio_request(gpio + 5, "WLAN_RESET");
- gpio_direction_output(gpio + 5, 1);
-
- /* p6 = nATA_SEL (initial: select) */
- gpio_request(gpio + 6, "nATA_SEL");
- gpio_direction_output(gpio + 6, 0);
-
- /* p7 = nCF_SEL (initial: deselect) */
- gpio_request(gpio + 7, "nCF_SEL");
- gpio_direction_output(gpio + 7, 1);
-
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
- setup_usb(500, 8);
-
- return 0;
-}
-
-static int
-evm_u35_teardown(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
-{
- gpio_free(gpio + 7);
- gpio_free(gpio + 6);
- gpio_free(gpio + 5);
- gpio_free(gpio + 3);
- gpio_free(gpio + 2);
- gpio_free(gpio + 1);
- gpio_free(gpio + 0);
- return 0;
-}
-
-static struct pcf857x_platform_data pcf_data_u35 = {
- .gpio_base = PCF_Uxx_BASE(2),
- .setup = evm_u35_setup,
- .teardown = evm_u35_teardown,
-};
-
-/*----------------------------------------------------------------------*/
-
-/* Most of this EEPROM is unused, but U-Boot uses some data:
- * - 0x7f00, 6 bytes Ethernet Address
- * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
- * - ... newer boards may have more
- */
-static struct at24_platform_data eeprom_info = {
- .byte_len = (256*1024) / 8,
- .page_size = 64,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info __initdata i2c_info[] = {
- {
- I2C_BOARD_INFO("pcf8574", 0x38),
- .platform_data = &pcf_data_u2,
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x39),
- .platform_data = &pcf_data_u18,
- },
- {
- I2C_BOARD_INFO("pcf8574", 0x3a),
- .platform_data = &pcf_data_u35,
- },
- {
- I2C_BOARD_INFO("24c256", 0x50),
- .platform_data = &eeprom_info,
- },
- /* ALSO:
- * - tvl320aic33 audio codec (0x1b)
- * - msp430 microcontroller (0x23)
- * - tvp5146 video decoder (0x5d)
- */
-};
-
-/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
- * which requires 100 usec of idle bus after i2c writes sent to it.
- */
-static struct davinci_i2c_platform_data i2c_pdata = {
- .bus_freq = 20 /* kHz */,
- .bus_delay = 100 /* usec */,
-};
-
-static void __init evm_init_i2c(void)
-{
- davinci_init_i2c(&i2c_pdata);
- i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
-}
-
-static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- &davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
- &ide_dev,
-#endif
-};
-
-static void __init
-davinci_evm_map_io(void)
-{
- davinci_map_common_io();
-}
-
-static __init void davinci_evm_init(void)
-{
- davinci_psc_init();
-
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
- "but share pins.\n\t Disable IDE for NOR support.\n");
-#endif
-#endif
-
- platform_add_devices(davinci_evm_devices,
- ARRAY_SIZE(davinci_evm_devices));
- evm_init_i2c();
-}
-
-static __init void davinci_evm_irq_init(void)
-{
- davinci_init_common_hw();
- davinci_irq_init();
-}
-
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
- /* Maintainer: MontaVista Software <source@mvista.com> */
- .phys_io = IO_PHYS,
- .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
- .map_io = davinci_evm_map_io,
- .init_irq = davinci_evm_irq_init,
- .timer = &davinci_timer,
- .init_machine = davinci_evm_init,
-MACHINE_END
/*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/psc.h>
+#include <mach/cputype.h>
#include "clock.h"
-/* PLL/Reset register offsets */
-#define PLLM 0x110
-
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000; /* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
+ return (clk->flags & PSC_DSP)
+ ? DAVINCI_GPSC_DSPDOMAIN
+ : DAVINCI_GPSC_ARMDOMAIN;
}
-EXPORT_SYMBOL(clk_get);
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
- return 0;
+ if (clk->parent)
+ __clk_enable(clk->parent);
+ if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
- if (clk->usecount)
+ if (WARN_ON(clk->usecount == 0))
return;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+ if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- if (clk->usecount++ == 0) {
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(clk_enable);
if (clk == NULL || IS_ERR(clk))
return;
- if (clk->usecount > 0 && !(--clk->usecount)) {
- spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (WARN(clk->parent && !clk->parent->rate,
+ "CLK: %s parent %s has no rate!\n",
+ clk->name, clk->parent->name))
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
+ list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
+ /* If rate is already set, use it */
+ if (clk->rate)
+ return 0;
+
+ /* Otherwise, default to parent rate */
+ if (clk->parent)
+ clk->rate = clk->parent->rate;
+
return 0;
}
EXPORT_SYMBOL(clk_register);
}
EXPORT_SYMBOL(clk_unregister);
-static struct clk davinci_clks[] = {
- {
- .name = "ARMCLK",
- .rate = &armrate,
- .lpsc = -1,
- .flags = ALWAYS_ENABLED,
- },
- {
- .name = "UART",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_UART0,
- },
- {
- .name = "EMACCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
- },
- {
- .name = "I2CCLK",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_I2C,
- },
- {
- .name = "IDECLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_ATA,
- },
- {
- .name = "McBSPCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_McBSP,
- },
- {
- .name = "MMCSDCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_MMC_SD,
- },
- {
- .name = "SPICLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_SPI,
- },
- {
- .name = "gpio",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_GPIO,
- },
- {
- .name = "usb",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_USB,
- },
- {
- .name = "AEMIFCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_AEMIF,
- .usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+
+ spin_lock_irq(&clockfw_lock);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->usecount > 0)
+ continue;
+ if (!(ck->flags & CLK_PSC))
+ continue;
+
+ /* ignore if in Disabled or SwRstDisable states */
+ if (!davinci_psc_is_clk_active(ck->lpsc))
+ continue;
+
+ pr_info("Clocks: disable unused %s\n", ck->name);
+ davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
-};
+ spin_unlock_irq(&clockfw_lock);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
{
- struct clk *clkp;
- int count = 0;
- u32 pll_mult;
-
- pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
- commonrate = ((pll_mult + 1) * 27000000) / 6;
- armrate = ((pll_mult + 1) * 27000000) / 2;
-
- for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
- count++, clkp++) {
- clk_register(clkp);
-
- /* Turn on clocks that have been enabled in the
- * table above */
- if (clkp->usecount)
- clk_enable(clkp);
+ u32 v, plldiv;
+ struct pll_data *pll;
+
+ /* If this is the PLL base clock, no more calculations needed */
+ if (clk->pll_data)
+ return;
+
+ if (WARN_ON(!clk->parent))
+ return;
+
+ clk->rate = clk->parent->rate;
+
+ /* Otherwise, the parent must be a PLL */
+ if (WARN_ON(!clk->parent->pll_data))
+ return;
+
+ pll = clk->parent->pll_data;
+
+ /* If pre-PLL, source clock is before the multiplier and divider(s) */
+ if (clk->flags & PRE_PLL)
+ clk->rate = pll->input_rate;
+
+ if (!clk->div_reg)
+ return;
+
+ v = __raw_readl(pll->base + clk->div_reg);
+ if (v & PLLDIV_EN) {
+ plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+ if (plldiv)
+ clk->rate /= plldiv;
+ }
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+ u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+ u8 bypass;
+ struct pll_data *pll = clk->pll_data;
+
+ pll->base = IO_ADDRESS(pll->phys_base);
+ ctrl = __raw_readl(pll->base + PLLCTL);
+ clk->rate = pll->input_rate = clk->parent->rate;
+
+ if (ctrl & PLLCTL_PLLEN) {
+ bypass = 0;
+ mult = __raw_readl(pll->base + PLLM);
+ mult = (mult & PLLM_PLLM_MASK) + 1;
+ } else
+ bypass = 1;
+
+ if (pll->flags & PLL_HAS_PREDIV) {
+ prediv = __raw_readl(pll->base + PREDIV);
+ if (prediv & PLLDIV_EN)
+ prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+ else
+ prediv = 1;
+ }
+
+ /* pre-divider is fixed, but (some?) chips won't report that */
+ if (cpu_is_davinci_dm355() && pll->num == 1)
+ prediv = 8;
+
+ if (pll->flags & PLL_HAS_POSTDIV) {
+ postdiv = __raw_readl(pll->base + POSTDIV);
+ if (postdiv & PLLDIV_EN)
+ postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+ else
+ postdiv = 1;
+ }
+
+ if (!bypass) {
+ clk->rate /= prediv;
+ clk->rate *= mult;
+ clk->rate /= postdiv;
+ }
+
+ pr_debug("PLL%d: input = %lu MHz [ ",
+ pll->num, clk->parent->rate / 1000000);
+ if (bypass)
+ pr_debug("bypass ");
+ if (prediv > 1)
+ pr_debug("/ %d ", prediv);
+ if (mult > 1)
+ pr_debug("* %d ", mult);
+ if (postdiv > 1)
+ pr_debug("/ %d ", postdiv);
+ pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+ {
+ struct davinci_clk *c;
+ struct clk *clk;
+
+ for (c = clocks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+
+ if (clk->pll_data)
+ clk_pll_init(clk);
+
+ /* Calculate rates for PLL-derived clocks */
+ else if (clk->flags & CLK_PLL)
+ clk_sysclk_recalc(clk);
+
+ if (clk->lpsc)
+ clk->flags |= CLK_PSC;
+
+ clkdev_add(&c->lk);
+ clk_register(clk);
+
+ /* Turn on clocks that Linux doesn't otherwise manage */
+ if (clk->flags & ALWAYS_ENABLED)
+ clk_enable(clk);
}
return 0;
{
}
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX 10 /* longest clock name */
+#define NEST_DELTA 2
+#define NEST_MAX 4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
- struct clk *cp;
+ char *state;
+ char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ if (parent->flags & CLK_PLL)
+ state = "pll";
+ else if (parent->flags & CLK_PSC)
+ state = "psc";
+ else
+ state = "";
+
+ /* <nest spaces> name <pad to end> */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+ buf, parent->usecount, state, clk_get_rate(parent));
+ /* REVISIT show device associations too */
+
+ /* cost is now small, but not linear... */
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->parent == parent)
+ dump_clock(s, nest + NEST_DELTA, clk);
+ }
+}
- list_for_each_entry(cp, &clocks, node)
- seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+ /* Show clock tree; we know the main oscillator is first.
+ * We trust nonzero usecounts equate to PSC enables...
+ */
+ mutex_lock(&clocks_mutex);
+ if (!list_empty(&clocks))
+ dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+ mutex_unlock(&clocks_mutex);
return 0;
}
}
__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */
/*
* TI DaVinci clock definitions
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL 0x100
+#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_CLKMODE BIT(8)
+
+#define PLLM 0x110
+#define PLLM_PLLM_MASK 0xff
+
+#define PREDIV 0x114
+#define PLLDIV1 0x118
+#define PLLDIV2 0x11c
+#define PLLDIV3 0x120
+#define POSTDIV 0x128
+#define BPDIV 0x12c
+#define PLLCMD 0x138
+#define PLLSTAT 0x13c
+#define PLLALNCTL 0x140
+#define PLLDCHANGE 0x144
+#define PLLCKEN 0x148
+#define PLLCKSTAT 0x14c
+#define PLLSYSTAT 0x150
+#define PLLDIV4 0x160
+#define PLLDIV5 0x164
+#define PLLDIV6 0x168
+#define PLLDIV7 0x16c
+#define PLLDIV8 0x170
+#define PLLDIV9 0x174
+#define PLLDIV_EN BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+ u32 phys_base;
+ void __iomem *base;
+ u32 num;
+ u32 flags;
+ u32 input_rate;
+};
+#define PLL_HAS_PREDIV 0x01
+#define PLL_HAS_POSTDIV 0x02
+
struct clk {
struct list_head node;
struct module *owner;
const char *name;
- unsigned int *rate;
- int id;
- __s8 usecount;
- __u8 flags;
- __u8 lpsc;
+ unsigned long rate;
+ u8 usecount;
+ u8 flags;
+ u8 lpsc;
+ struct clk *parent;
+ struct pll_data *pll_data;
+ u32 div_reg;
};
/* Clock flags */
-#define RATE_CKCTL 1
-#define RATE_FIXED 2
-#define RATE_PROPAGATES 4
-#define VIRTUAL_CLOCK 8
-#define ALWAYS_ENABLED 16
-#define ENABLE_REG_32BIT 32
+#define ALWAYS_ENABLED BIT(1)
+#define CLK_PSC BIT(2)
+#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL BIT(4) /* PLL-derived clock */
+#define PRE_PLL BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+int davinci_clk_init(struct davinci_clk *clocks);
#endif
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
+ if (cpu_is_davinci_dm644x())
+ davinci_cfg_reg(DM644X_I2C);
+
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}
--- /dev/null
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ 27000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+ .name = "pll2_sysclk2",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_GEM,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+ .name = "vicp",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+ .name = "ide",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+ .name = "mmcsd",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+ .name = "spi",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+ .name = "vlynq",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "vicp", &vicp_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("palm_bk3710", NULL, &ide_clk),
+ CLK("soc-audio.0", NULL, &asp_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+ CLK(NULL, "spi", &spi_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, "vlynq", &vlynq_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+ {
+ .start = DM644X_EMAC_BASE,
+ .end = DM644X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_EMACINT,
+ .end = IRQ_EMACINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm644x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dm644x_emac_resources),
+ .resource = dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
+MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
+MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
+
+MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
+
+MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
+
+MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
+
+MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
+
+MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
+MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
+
+MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
+
+MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
+
+MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
+
+MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
+MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
+MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
+
+MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
+
+MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
+
+MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
+MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
+MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
+MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
+
+MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
+
+MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
+MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+ 0, 1, 12, 13, 14,
+ 15, 25, 30, 31, 45,
+ 46, 47, 55, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm644x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+ davinci_clk_init(dm644x_clks);
+ davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm644x())
+ return 0;
+
+ platform_device_register(&dm644x_edma_device);
+ return 0;
+}
+postcore_initcall(dm644x_init_devices);
--- /dev/null
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE 0x01C00000
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+#define EDMA_MAX_EVQUE 2 /* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ val |= or;
+ edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val |= or;
+ edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+ return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+ edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+ edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+ edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+ edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+ return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+ return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+ return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+ edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+ edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+ edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform. It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+ {0, 0},
+ {1, 1},
+ {-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {1, 7},
+ {-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = EVENTQ_1;
+
+ queue_no &= 7;
+ edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ if (!callback) {
+ edma_shadow0_write_array(SH_IECR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+
+ intr_data[lch].callback = callback;
+ intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(SH_ICR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ edma_shadow0_write_array(SH_IESR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+ && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j;
+ if (edma_shadow0_read_array(SH_IPR, 0))
+ j = 0;
+ else if (edma_shadow0_read_array(SH_IPR, 1))
+ j = 1;
+ else
+ break;
+ dev_dbg(data, "IPR%d %08x\n", j,
+ edma_shadow0_read_array(SH_IPR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(SH_ICR, j, (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k, DMA_COMPLETE,
+ intr_data[k].data);
+ }
+ }
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_shadow0_write(SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+ (edma_read_array(EDMA_EMR, 1) == 0) &&
+ (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, 1 << i);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j,
+ (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k,
+ DMA_CC_ERROR,
+ intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_QEMR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_QEMCR, 1 << i);
+ edma_shadow0_write(SH_QSECR, (1 << i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_CCERR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_CCERRCLR, 1 << i);
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(EDMA_EMR, 0) == 0)
+ && (edma_read_array(EDMA_EMR, 1) == 0)
+ && (edma_read(EDMA_QEMR) == 0)
+ && (edma_read(EDMA_CCERR) == 0)) {
+ break;
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled false /* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc0err_handler\n");
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc1err_handler\n");
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ if (channel < 0) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_noevent,
+ num_channels, channel);
+ if (channel == num_channels)
+ return -ENOMEM;
+ if (!test_and_set_bit(channel, edma_inuse))
+ break;
+ channel++;
+ }
+ } else if (channel >= num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(channel);
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(channel, callback, data);
+
+ map_dmach_queue(channel, eventq_no);
+
+ return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+ if (slot < 0) {
+ slot = num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_inuse,
+ num_slots, slot);
+ if (slot == num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_inuse))
+ break;
+ }
+ } else if (slot < num_channels || slot >= num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ if (slot < num_channels || slot >= num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot. Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct edmacc_param temp;
+
+ edma_read_slot(slot, &temp);
+ if (src != NULL)
+ *src = temp.src;
+ if (dst != NULL)
+ *dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ if (from >= num_slots)
+ return;
+ if (to >= num_slots)
+ return;
+ edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ if (from >= num_slots)
+ return;
+ edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_noevent)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(SH_ESR, j));
+ edma_shadow0_write_array(SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(SH_ER, j));
+ /* Clear any pending error */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_shadow0_write_array(SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, j, mask);
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write_array(EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = 1 << (channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+ if (channel < 32)
+ edma_write(EDMA_ECR, 1 << channel);
+ else
+ edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info *info = pdev->dev.platform_data;
+ int i;
+ int status;
+ const s8 *noevent;
+ int irq = 0, err_irq = 0;
+ struct resource *r;
+ resource_size_t len;
+
+ if (!info)
+ return -ENODEV;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+ if (!r)
+ return -ENODEV;
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r)
+ return -EBUSY;
+
+ edmacc_regs_base = ioremap(r->start, len);
+ if (!edmacc_regs_base) {
+ status = -EBUSY;
+ goto fail1;
+ }
+
+ num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+ num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+ for (i = 0; i < num_slots; i++)
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ noevent = info->noevent;
+ if (noevent) {
+ while (*noevent != -1)
+ set_bit(*noevent++, edma_noevent);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ irq, status);
+ goto fail;
+ }
+
+ err_irq = platform_get_irq(pdev, 1);
+ status = request_irq(err_irq, dma_ccerr_handler, 0,
+ "edma_error", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ err_irq, status);
+ goto fail;
+ }
+
+ if (tc_errs_handled) {
+ status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+ "edma_tc0", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ IRQ_TCERRINT0, status);
+ return status;
+ }
+ status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+ "edma_tc1", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+ IRQ_TCERRINT, status);
+ return status;
+ }
+ }
+
+ /* Everything lives on transfer controller 1 until otherwise specified.
+ * This way, long transfers on the low priority queue
+ * started by the codec engine will not cause audio defects.
+ */
+ for (i = 0; i < num_channels; i++)
+ map_dmach_queue(i, EVENTQ_1);
+
+ /* Event queue to TC mapping */
+ for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+ map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ for (i = 0; i < info->n_region; i++) {
+ edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(EDMA_QRAE, i, 0x0);
+ }
+
+ return 0;
+
+fail:
+ if (err_irq)
+ free_irq(err_irq, NULL);
+ if (irq)
+ free_irq(irq, NULL);
+ iounmap(edmacc_regs_base);
+fail1:
+ release_mem_region(r->start, len);
+ return status;
+}
+
+
+static struct platform_driver edma_driver = {
+ .driver.name = "edma",
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
#include <linux/irq.h>
#include <linux/bitops.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static unsigned __initdata ngpio;
/* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
{
int i, base;
- for (i = 0, base = 0;
- i < ARRAY_SIZE(chips);
- i++, base += 32) {
+ /* The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ ngpio = 104;
+ } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
+ ngpio = 71;
+ } else if (cpu_is_davinci_dm646x()) {
+ /* NOTE: each bank has several "reserved" bits,
+ * unusable as GPIOs. Only 33 of the GPIO numbers
+ * are usable, and we're not rejecting the others.
+ */
+ ngpio = 43;
+ } else {
+ /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
- chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
- * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
- * a good way to hook those up ...
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options). We don't try to use those.
*
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
}
/*
- * NOTE: for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
+ unsigned bank_irq;
struct clk *clk;
+ u32 binten = 0;
+
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ bank_irq = IRQ_DM355_GPIOBNK0;
+ } else if (cpu_is_davinci_dm644x()) {
+ bank_irq = IRQ_GPIOBNK0;
+ } else if (cpu_is_davinci_dm646x()) {
+ bank_irq = IRQ_DM646X_GPIOBNK0;
+ } else {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
- return 0;
+ return PTR_ERR(clk);
}
-
clk_enable(clk);
- for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
- gpio < DAVINCI_N_GPIO; bank++) {
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
- set_irq_chained_handler(bank, gpio_irq_handler);
- set_irq_chip_data(bank, g);
- set_irq_data(bank, (void *)irq);
+ set_irq_chained_handler(bank_irq, gpio_irq_handler);
+ set_irq_chip_data(bank_irq, g);
+ set_irq_data(bank_irq, (void *)irq);
- for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
- i++, irq++, gpio++) {
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
+ binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(0x1f, (void *__iomem)
+ __raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-
arch_initcall(davinci_gpio_irq_setup);
#include <linux/init.h>
#include <linux/io.h>
-#define JTAG_ID_BASE 0x01c40028
+#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
.manufacturer = 0x017,
.type = 0x64460000,
},
+ {
+ /* DM646X */
+ .part_no = 0xb770,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64670000,
+ },
+ {
+ /* DM355 */
+ .part_no = 0xb73b,
+ .variant = 0x0,
+ .manufacturer = 0x00f,
+ .type = 0x03550000,
+ },
};
/*
{
u32 dev_id, part_no;
- dev_id = davinci_readl(JTAG_ID_BASE);
+ dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
{
u32 variant;
- variant = davinci_readl(JTAG_ID_BASE);
+ variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
+unsigned int davinci_rev(void)
+{
+ return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
void __init davinci_check_revision(void)
{
int i;
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
- printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+ printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+ davinci_rev(), variant);
}
--- /dev/null
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE 0x01E02000
+#define DAVINCI_ASP1_BASE 0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX 2
+#define DAVINCI_DMA_ASP0_RX 3
+#define DAVINCI_DMA_ASP1_TX 8
+#define DAVINCI_DMA_ASP1_RX 9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
--- /dev/null
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif
--- /dev/null
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
#endif
extern struct sys_timer davinci_timer;
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
--- /dev/null
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type. In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_dm ##type(void) \
+{ \
+ return (davinci_rev() == (id)) ? 1 : 0; \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif
--- /dev/null
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE (0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM644X_EMAC_MDIO_OFFSET (0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */
--- /dev/null
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT 16
+#define CCERRINT_INTERRUPT 17
+#define TCERRINT0_INTERRUPT 18
+#define TCERRINT1_INTERRUPT 19
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead. (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX 2
+#define DAVINCI_DMA_MCBSP_RX 3
+#define DAVINCI_DMA_VPSS_HIST 4
+#define DAVINCI_DMA_VPSS_H3A 5
+#define DAVINCI_DMA_VPSS_PRVU 6
+#define DAVINCI_DMA_VPSS_RSZ 7
+#define DAVINCI_DMA_IMCOP_IMXINT 8
+#define DAVINCI_DMA_IMCOP_VLCDINT 9
+#define DAVINCI_DMA_IMCO_PASQINT 10
+#define DAVINCI_DMA_IMCOP_DSQINT 11
+#define DAVINCI_DMA_SPI_SPIX 16
+#define DAVINCI_DMA_SPI_SPIR 17
+#define DAVINCI_DMA_UART0_URXEVT0 18
+#define DAVINCI_DMA_UART0_UTXEVT0 19
+#define DAVINCI_DMA_UART1_URXEVT1 20
+#define DAVINCI_DMA_UART1_UTXEVT1 21
+#define DAVINCI_DMA_UART2_URXEVT2 22
+#define DAVINCI_DMA_UART2_UTXEVT2 23
+#define DAVINCI_DMA_MEMSTK_MSEVT 24
+#define DAVINCI_DMA_MMCRXEVT 26
+#define DAVINCI_DMA_MMCTXEVT 27
+#define DAVINCI_DMA_I2C_ICREVT 28
+#define DAVINCI_DMA_I2C_ICXEVT 29
+#define DAVINCI_DMA_GPIO_GPINT0 32
+#define DAVINCI_DMA_GPIO_GPINT1 33
+#define DAVINCI_DMA_GPIO_GPINT2 34
+#define DAVINCI_DMA_GPIO_GPINT3 35
+#define DAVINCI_DMA_GPIO_GPINT4 36
+#define DAVINCI_DMA_GPIO_GPINT5 37
+#define DAVINCI_DMA_GPIO_GPINT6 38
+#define DAVINCI_DMA_GPIO_GPINT7 39
+#define DAVINCI_DMA_GPIO_GPBNKINT0 40
+#define DAVINCI_DMA_GPIO_GPBNKINT1 41
+#define DAVINCI_DMA_GPIO_GPBNKINT2 42
+#define DAVINCI_DMA_GPIO_GPBNKINT3 43
+#define DAVINCI_DMA_GPIO_GPBNKINT4 44
+#define DAVINCI_DMA_TIMER0_TINT0 48
+#define DAVINCI_DMA_TIMER1_TINT1 49
+#define DAVINCI_DMA_TIMER2_TINT2 50
+#define DAVINCI_DMA_TIMER3_TINT3 51
+#define DAVINCI_DMA_PWM0 52
+#define DAVINCI_DMA_PWM1 53
+#define DAVINCI_DMA_PWM2 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+};
+
+#endif
#include <linux/io.h>
#include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
#include <mach/irqs.h>
+#define DAVINCI_GPIO_BASE 0x01C67000
+
/*
* basic gpio routines
*
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
-#define GPIO(X) (X) /* 0 <= X <= 70 */
-#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
-#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
{
void *__iomem ptr;
- if (gpio < 32)
+ if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
- else if (gpio < 64)
+ else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
- else if (gpio < DAVINCI_N_GPIO)
+ else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ else if (gpio < 32 * 4)
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;
/*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
*
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
*
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
#define __ASM_ARCH_HARDWARE_H
/*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
*/
-#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
-#define DAVINCI_I2C_BASE (0x01C21000)
-#define DAVINCI_PWM0_BASE (0x01C22000)
-#define DAVINCI_PWM1_BASE (0x01C22400)
-#define DAVINCI_PWM2_BASE (0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
-#define DAVINCI_IEEE1394_BASE (0x01C60000)
-#define DAVINCI_USB_OTG_BASE (0x01C64000)
-#define DAVINCI_CFC_ATA_BASE (0x01C66000)
-#define DAVINCI_SPI_BASE (0x01C66800)
-#define DAVINCI_GPIO_BASE (0x01C67000)
-#define DAVINCI_UHPI_BASE (0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
-#define DAVINCI_IMCOP_BASE (0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
-#define DAVINCI_VLYNQ_BASE (0x01E01000)
-#define DAVINCI_MCBSP_BASE (0x01E02000)
-#define DAVINCI_MMC_SD_BASE (0x01E10000)
-#define DAVINCI_MS_BASE (0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */
#else
#define IOMEM(x) ((void __force __iomem *)(x))
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
- */
-#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
+#define __arch_iounmap(v) davinci_iounmap(v)
-#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+ unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
-#define DAVINCI_N_GPIO 71
+#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0 0
+#define IRQ_DM646X_VP_VERTINT1 1
+#define IRQ_DM646X_VP_VERTINT2 2
+#define IRQ_DM646X_VP_VERTINT3 3
+#define IRQ_DM646X_VP_ERRINT 4
+#define IRQ_DM646X_RESERVED_1 5
+#define IRQ_DM646X_RESERVED_2 6
+#define IRQ_DM646X_WDINT 7
+#define IRQ_DM646X_CRGENINT0 8
+#define IRQ_DM646X_CRGENINT1 9
+#define IRQ_DM646X_TSIFINT0 10
+#define IRQ_DM646X_TSIFINT1 11
+#define IRQ_DM646X_VDCEINT 12
+#define IRQ_DM646X_USBINT 13
+#define IRQ_DM646X_USBDMAINT 14
+#define IRQ_DM646X_PCIINT 15
+#define IRQ_DM646X_TCERRINT2 20
+#define IRQ_DM646X_TCERRINT3 21
+#define IRQ_DM646X_IDE 22
+#define IRQ_DM646X_HPIINT 23
+#define IRQ_DM646X_EMACRXTHINT 24
+#define IRQ_DM646X_EMACRXINT 25
+#define IRQ_DM646X_EMACTXINT 26
+#define IRQ_DM646X_EMACMISCINT 27
+#define IRQ_DM646X_MCASP0TXINT 28
+#define IRQ_DM646X_MCASP0RXINT 29
+#define IRQ_DM646X_RESERVED_3 31
+#define IRQ_DM646X_MCASP1TXINT 32
+#define IRQ_DM646X_VLQINT 38
+#define IRQ_DM646X_UARTINT2 42
+#define IRQ_DM646X_SPINT0 43
+#define IRQ_DM646X_SPINT1 44
+#define IRQ_DM646X_DSP2ARMINT 45
+#define IRQ_DM646X_RESERVED_4 46
+#define IRQ_DM646X_PSCINT 47
+#define IRQ_DM646X_GPIO0 48
+#define IRQ_DM646X_GPIO1 49
+#define IRQ_DM646X_GPIO2 50
+#define IRQ_DM646X_GPIO3 51
+#define IRQ_DM646X_GPIO4 52
+#define IRQ_DM646X_GPIO5 53
+#define IRQ_DM646X_GPIO6 54
+#define IRQ_DM646X_GPIO7 55
+#define IRQ_DM646X_GPIOBNK0 56
+#define IRQ_DM646X_GPIOBNK1 57
+#define IRQ_DM646X_GPIOBNK2 58
+#define IRQ_DM646X_DDRINT 59
+#define IRQ_DM646X_AEMIFINT 60
+
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0 0
+#define IRQ_DM355_CCDC_VDINT1 1
+#define IRQ_DM355_CCDC_VDINT2 2
+#define IRQ_DM355_IPIPE_HST 3
+#define IRQ_DM355_H3AINT 4
+#define IRQ_DM355_IPIPE_SDR 5
+#define IRQ_DM355_IPIPEIFINT 6
+#define IRQ_DM355_OSDINT 7
+#define IRQ_DM355_VENCINT 8
+#define IRQ_DM355_IMCOPINT 11
+#define IRQ_DM355_RTOINT 13
+#define IRQ_DM355_TINT4 13
+#define IRQ_DM355_TINT2_TINT12 13
+#define IRQ_DM355_UARTINT2 14
+#define IRQ_DM355_TINT5 14
+#define IRQ_DM355_TINT2_TINT34 14
+#define IRQ_DM355_TINT6 15
+#define IRQ_DM355_TINT3_TINT12 15
+#define IRQ_DM355_SPINT1_0 17
+#define IRQ_DM355_SPINT1_1 18
+#define IRQ_DM355_SPINT2_0 19
+#define IRQ_DM355_SPINT2_1 21
+#define IRQ_DM355_TINT7 22
+#define IRQ_DM355_TINT3_TINT34 22
+#define IRQ_DM355_SDIOINT0 23
+#define IRQ_DM355_MMCINT0 26
+#define IRQ_DM355_MSINT 26
+#define IRQ_DM355_MMCINT1 27
+#define IRQ_DM355_PWMINT3 28
+#define IRQ_DM355_SDIOINT1 31
+#define IRQ_DM355_SPINT0_0 42
+#define IRQ_DM355_SPINT0_1 43
+#define IRQ_DM355_GPIO0 44
+#define IRQ_DM355_GPIO1 45
+#define IRQ_DM355_GPIO2 46
+#define IRQ_DM355_GPIO3 47
+#define IRQ_DM355_GPIO4 48
+#define IRQ_DM355_GPIO5 49
+#define IRQ_DM355_GPIO6 50
+#define IRQ_DM355_GPIO7 51
+#define IRQ_DM355_GPIO8 52
+#define IRQ_DM355_GPIO9 53
+#define IRQ_DM355_GPIOBNK0 54
+#define IRQ_DM355_GPIOBNK1 55
+#define IRQ_DM355_GPIOBNK2 56
+#define IRQ_DM355_GPIOBNK3 57
+#define IRQ_DM355_GPIOBNK4 58
+#define IRQ_DM355_GPIOBNK5 59
+#define IRQ_DM355_GPIOBNK6 60
+
#endif /* __ASM_ARCH_IRQS_H */
/*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0 0
-#define DAVINCI_MUX_AEAW1 1
-#define DAVINCI_MUX_AEAW2 2
-#define DAVINCI_MUX_AEAW3 3
-#define DAVINCI_MUX_AEAW4 4
-#define DAVINCI_MUX_AECS4 10
-#define DAVINCI_MUX_AECS5 11
-#define DAVINCI_MUX_VLYNQWD0 12
-#define DAVINCI_MUX_VLYNQWD1 13
-#define DAVINCI_MUX_VLSCREN 14
-#define DAVINCI_MUX_VLYNQEN 15
-#define DAVINCI_MUX_HDIREN 16
-#define DAVINCI_MUX_ATAEN 17
-#define DAVINCI_MUX_RGB666 22
-#define DAVINCI_MUX_RGB888 23
-#define DAVINCI_MUX_LOEEN 24
-#define DAVINCI_MUX_LFLDEN 25
-#define DAVINCI_MUX_CWEN 26
-#define DAVINCI_MUX_CFLDEN 27
-#define DAVINCI_MUX_HPIEN 29
-#define DAVINCI_MUX_1394EN 30
-#define DAVINCI_MUX_EMACEN 31
-
-#define DAVINCI_MUX_LEVEL2 32
-#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+/* dm355 only */
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+struct mux_config {
+ const char *name;
+ const char *mux_reg_name;
+ const unsigned char mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+ const unsigned char mode;
+ bool debug;
+};
+
+enum davinci_dm644x_index {
+ /* ATA and HDDIR functions */
+ DM644X_HDIREN,
+ DM644X_ATAEN,
+ DM644X_ATAEN_DISABLE,
+
+ /* HPI functions */
+ DM644X_HPIEN_DISABLE,
+
+ /* AEAW functions */
+ DM644X_AEAW,
+
+ /* Memory Stick */
+ DM644X_MSTK,
+
+ /* I2C */
+ DM644X_I2C,
+
+ /* ASP function */
+ DM644X_MCBSP,
+
+ /* UART1 */
+ DM644X_UART1,
+
+ /* UART2 */
+ DM644X_UART2,
+
+ /* PWM0 */
+ DM644X_PWM0,
+
+ /* PWM1 */
+ DM644X_PWM1,
+
+ /* PWM2 */
+ DM644X_PWM2,
+
+ /* VLYNQ function */
+ DM644X_VLYNQEN,
+ DM644X_VLSCREN,
+ DM644X_VLYNQWD,
+
+ /* EMAC and MDIO function */
+ DM644X_EMACEN,
+
+ /* GPIO3V[0:16] pins */
+ DM644X_GPIO3V,
+
+ /* GPIO pins */
+ DM644X_GPIO0,
+ DM644X_GPIO3,
+ DM644X_GPIO43_44,
+ DM644X_GPIO46_47,
+
+ /* VPBE */
+ DM644X_RGB666,
+
+ /* LCD */
+ DM644X_LOEEN,
+ DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+ /* ATA function */
+ DM646X_ATAEN,
+
+ /* AUDIO Clock */
+ DM646X_AUDCK1,
+ DM646X_AUDCK0,
+
+ /* CRGEN Control */
+ DM646X_CRGMUX,
+
+ /* VPIF Control */
+ DM646X_STSOMUX_DISABLE,
+ DM646X_STSIMUX_DISABLE,
+ DM646X_PTSOMUX_DISABLE,
+ DM646X_PTSIMUX_DISABLE,
+
+ /* TSIF Control */
+ DM646X_STSOMUX,
+ DM646X_STSIMUX,
+ DM646X_PTSOMUX_PARALLEL,
+ DM646X_PTSIMUX_PARALLEL,
+ DM646X_PTSOMUX_SERIAL,
+ DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+ /* MMC/SD 0 */
+ DM355_MMCSD0,
+
+ /* MMC/SD 1 */
+ DM355_SD1_CLK,
+ DM355_SD1_CMD,
+ DM355_SD1_DATA3,
+ DM355_SD1_DATA2,
+ DM355_SD1_DATA1,
+ DM355_SD1_DATA0,
+
+ /* I2C */
+ DM355_I2C_SDA,
+ DM355_I2C_SCL,
+
+ /* ASP0 function */
+ DM355_MCBSP0_BDX,
+ DM355_MCBSP0_X,
+ DM355_MCBSP0_BFSX,
+ DM355_MCBSP0_BDR,
+ DM355_MCBSP0_R,
+ DM355_MCBSP0_BFSR,
+
+ /* SPI0 */
+ DM355_SPI0_SDI,
+ DM355_SPI0_SDENA0,
+ DM355_SPI0_SDENA1,
+
+ /* IRQ muxing */
+ DM355_INT_EDMA_CC,
+ DM355_INT_EDMA_TC0_ERR,
+ DM355_INT_EDMA_TC1_ERR,
+
+ /* EDMA event muxing */
+ DM355_EVT8_ASP1_TX,
+ DM355_EVT9_ASP1_RX,
+ DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
-#define DAVINCI_LPSC_MDIO 7
-#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
-#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DM355_LPSC_TIMER3 5
+#define DM355_LPSC_SPI1 6
+#define DM355_LPSC_MMC_SD1 7
+#define DM355_LPSC_McBSP1 8
+#define DM355_LPSC_PWM3 10
+#define DM355_LPSC_SPI2 11
+#define DM355_LPSC_RTO 12
+#define DM355_LPSC_VPSS_DAC 41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM 0
+#define DM646X_LPSC_C64X_CPU 1
+#define DM646X_LPSC_HDVICP0 2
+#define DM646X_LPSC_HDVICP1 3
+#define DM646X_LPSC_TPCC 4
+#define DM646X_LPSC_TPTC0 5
+#define DM646X_LPSC_TPTC1 6
+#define DM646X_LPSC_TPTC2 7
+#define DM646X_LPSC_TPTC3 8
+#define DM646X_LPSC_PCI 13
+#define DM646X_LPSC_EMAC 14
+#define DM646X_LPSC_VDCE 15
+#define DM646X_LPSC_VPSSMSTR 16
+#define DM646X_LPSC_VPSSSLV 17
+#define DM646X_LPSC_TSIF0 18
+#define DM646X_LPSC_TSIF1 19
+#define DM646X_LPSC_DDR_EMIF 20
+#define DM646X_LPSC_AEMIF 21
+#define DM646X_LPSC_McASP0 22
+#define DM646X_LPSC_McASP1 23
+#define DM646X_LPSC_CRGEN0 24
+#define DM646X_LPSC_CRGEN1 25
+#define DM646X_LPSC_UART0 26
+#define DM646X_LPSC_UART1 27
+#define DM646X_LPSC_UART2 28
+#define DM646X_LPSC_PWM0 29
+#define DM646X_LPSC_PWM1 30
+#define DM646X_LPSC_I2C 31
+#define DM646X_LPSC_SPI 32
+#define DM646X_LPSC_GPIO 33
+#define DM646X_LPSC_TIMER0 34
+#define DM646X_LPSC_TIMER1 35
+#define DM646X_LPSC_ARM_INTC 45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+ char enable);
+
#endif /* __ASM_ARCH_PSC_H */
#include <mach/io.h>
-#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS 3
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU 0x0c
+#define UART_DM646X_SCR 0x10
+#define UART_DM646X_SCR_TX_WATERMARK 0x08
+
+struct davinci_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
davinci_check_revision();
}
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+ if (BETWEEN(p, IO_PHYS, IO_SIZE))
+ return XLATE(p, IO_PHYS, IO_VIRT);
+
+ return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
{
- davinci_clk_init();
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
}
+EXPORT_SYMBOL(davinci_iounmap);
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
+const u8 *davinci_def_priorities;
+
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
static inline unsigned int davinci_irq_readl(int offset)
{
- return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+ return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+ __raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
.unmask = davinci_unmask_irq,
};
-
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
[IRQ_EMUINT] = 7,
};
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
- const u8 *priority = default_priorities;
+
+ if (cpu_is_davinci_dm644x())
+ davinci_def_priorities = dm644x_default_priorities;
+ else if (cpu_is_davinci_dm646x())
+ davinci_def_priorities = dm646x_default_priorities;
+ else if (cpu_is_davinci_dm355())
+ davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
unsigned j;
u32 pri;
- for (j = 0, pri = 0; j < 32; j += 4, priority++)
- pri |= (*priority & 0x07) << j;
+ for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+ pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}
/*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
-
#include <mach/mux.h>
-/* System control register offsets */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+ unsigned long size)
+{
+ mux_table = pins;
+ pin_table_sz = size;
-static DEFINE_SPINLOCK(mux_lock);
+ return 0;
+}
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
{
- u32 pinmux, muxreg = PINMUX0;
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ unsigned long flags;
+ const struct mux_config *cfg;
+ unsigned int reg_orig = 0, reg = 0;
+ unsigned int mask, warn = 0;
+
+ if (!mux_table)
+ BUG();
+
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ cfg = &mux_table[index];
+
+ if (cfg->name == NULL) {
+ printk(KERN_ERR "No entry for the specified index\n");
+ return -ENODEV;
+ }
+
+ /* Update the mux register in question */
+ if (cfg->mask) {
+ unsigned tmp1, tmp2;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg_orig = __raw_readl(base + cfg->mux_reg);
+
+ mask = (cfg->mask << cfg->mask_offset);
+ tmp1 = reg_orig & mask;
+ reg = reg_orig & ~mask;
+
+ tmp2 = (cfg->mode << cfg->mask_offset);
+ reg |= tmp2;
+
+ if (tmp1 != tmp2)
+ warn = 1;
+
+ __raw_writel(reg, base + cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+ printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+ }
- if (mux >= DAVINCI_MUX_LEVEL2) {
- muxreg = PINMUX1;
- mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+ if (cfg->debug || warn) {
+ printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+ printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
+#endif
- spin_lock(&mux_lock);
- pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- if (enable)
- pinmux |= (1 << mux);
- else
- pinmux &= ~(1 << mux);
- davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- spin_unlock(&mux_lock);
+ return 0;
}
+EXPORT_SYMBOL(davinci_cfg_reg);
--- /dev/null
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "PINMUX"#muxreg, \
+ .mux_reg = PINMUX##muxreg, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "INTMUX", \
+ .mux_reg = INTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "EVTMUX", \
+ .mux_reg = EVTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#endif /* _MACH_DAVINCI_MUX_H */
#include <linux/init.h>
#include <linux/io.h>
+#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
#define MDSTAT 0x800
#define MDCTL 0xA00
-/* System control register offsets */
-#define VDD3P3V_PWDN 0x48
+#define MDSTAT_STATE_MASK 0x1f
-static void davinci_psc_mux(unsigned int id)
+/* Return nonzero iff the domain's clock is active */
+int __init davinci_psc_is_clk_active(unsigned int id)
{
- switch (id) {
- case DAVINCI_LPSC_ATA:
- davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
- davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
- break;
- case DAVINCI_LPSC_MMC_SD:
- /* VDD power manupulations are done in U-Boot for CPMAC
- * so applies to MMC as well
- */
- /*Set up the pull regiter for MMC */
- davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
- davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
- break;
- case DAVINCI_LPSC_I2C:
- davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
- break;
- case DAVINCI_LPSC_McBSP:
- davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
- break;
- default:
- break;
- }
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+
+ /* if clocked, state can be "Enable" or "SyncReset" */
+ return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
- mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
- if (enable)
- mdctl |= 0x00000003; /* Enable Module */
- else
- mdctl &= 0xFFFFFFF2; /* Disable Module */
- davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+ mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ __raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+ pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- EPCPR);
+ epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- PTSTAT);
+ ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
- if (enable)
- mdstat_mask = 0x3;
- else
- mdstat_mask = 0x2;
-
do {
- mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- MDSTAT + 4 * id);
- } while (!((mdstat & 0x0000001F) == mdstat_mask));
-
- if (enable)
- davinci_psc_mux(id);
-}
-
-void __init davinci_psc_init(void)
-{
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
-
- /* Turn on WatchDog timer LPSC. Needed for RESET to work */
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include "clock.h"
-#define UART_DAVINCI_PWREMU 0x0c
-
-static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
- int offset)
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+ int offset)
{
offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
+ return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
-static inline void davinci_serial_outp(struct plat_serial8250_port *p,
- int offset, int value)
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+ int value)
{
offset <<= p->regshift;
- __raw_writeb(value, p->membase + offset);
+ __raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
- .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = 27000000,
},
{
.flags = 0
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
- /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
- davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+ serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+ if (cpu_is_davinci_dm646x())
+ serial_write_reg(p, UART_DM646X_SCR,
+ UART_DM646X_SCR_TX_WATERMARK);
+}
+
+void __init davinci_serial_init(struct davinci_uart_config *info)
+{
+ int i;
+ char name[16];
+ struct clk *uart_clk;
+ struct device *dev = &serial_device.dev;
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
+ struct plat_serial8250_port *p = serial_platform_data + i;
+
+ if (!(info->enabled_uarts & (1 << i))) {
+ p->flags = 0;
+ continue;
+ }
+
+ if (cpu_is_davinci_dm646x())
+ p->iotype = UPIO_MEM32;
+
+ if (cpu_is_davinci_dm355()) {
+ if (i == 2) {
+ p->mapbase = (unsigned long)DM355_UART2_BASE;
+ p->irq = IRQ_DM355_UARTINT2;
+ }
+ }
+
+ sprintf(name, "uart%d", i);
+ uart_clk = clk_get(dev, name);
+ if (IS_ERR(uart_clk))
+ printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ else {
+ clk_enable(uart_clk);
+ p->uartclk = clk_get_rate(uart_clk);
+ davinci_serial_reset(p);
+ }
+ }
}
static int __init davinci_init(void)
{
- davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
+#include <mach/cputype.h>
+#include "clock.h"
static struct clock_event_device clockevent_davinci;
+static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
unsigned int id;
unsigned long period;
unsigned long opts;
- unsigned long reg_base;
- unsigned long tim_reg;
- unsigned long prd_reg;
+ void __iomem *base;
+ unsigned long tim_off;
+ unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
static int timer32_config(struct timer_s *t)
{
- u32 tcr = davinci_readl(t->reg_base + TCR);
+ u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
- davinci_writel(0, t->tim_reg);
- davinci_writel(t->period, t->prd_reg);
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
- return davinci_readl(t->tim_reg);
+ return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
static void __init timer_init(void)
{
- u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
- u32 tgcr, base = bases[i];
+ u32 tgcr;
+ void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
+ u32 phys_base;
if (t->name) {
t->id = i;
- t->reg_base = (IS_TIMER1(t->id) ?
+ phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+ t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
- t->tim_reg = t->reg_base + TIM12;
- t->prd_reg = t->reg_base + PRD12;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
- t->tim_reg = t->reg_base + TIM34;
- t->prd_reg = t->reg_base + PRD34;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
}
/* Register interrupt */
/*
* clocksource
*/
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
{
struct timer_s *t = &timers[TID_CLOCKSOURCE];
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- t->period = CLOCK_TICK_RATE / (HZ);
+ t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
static void __init davinci_timer_init(void)
{
+ struct clk *timer_clk;
+
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
+ timer_clk = clk_get(NULL, "timer0");
+ BUG_ON(IS_ERR(timer_clk));
+ clk_enable(timer_clk);
+
+ davinci_clock_tick_rate = clk_get_rate(timer_clk);
+
/* setup clocksource */
clocksource_davinci.mult =
- clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
- clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
- u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+ u32 tgcr, wdtcr;
+ void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+ struct device dev;
+ struct clk *wd_clk;
+ char *name = "watchdog";
+
+ dev_set_name(&dev, name);
+ wd_clk = clk_get(&dev, NULL);
+ if (WARN_ON(IS_ERR(wd_clk)))
+ return;
+ clk_enable(wd_clk);
/* disable, internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
- davinci_writel(0, base + PRD12);
- davinci_writel(0, base + PRD34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
+ __raw_writel(0, base + PRD12);
+ __raw_writel(0, base + PRD34);
/* enable */
- wdtcr = davinci_readl(base + WDTCR);
+ wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
}
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },
#include <asm/div64.h>
#include <mach/hardware.h>
+
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
+
+
struct clk {
unsigned long rate;
int users;
+ int sw_locked;
u32 enable_reg;
u32 enable_mask;
+
+ unsigned long (*get_rate)(struct clk *clk);
};
-static struct clk clk_uart = {
- .rate = 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart2 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart3 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .get_rate = get_uart_rate,
};
static struct clk clk_pll1;
static struct clk clk_f;
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart),
- INIT_CK("apb:uart2", NULL, &clk_uart),
- INIT_CK("apb:uart3", NULL, &clk_uart),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value | clk->enable_mask, clk->enable_reg);
}
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
+static unsigned long get_uart_rate(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+ if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+ return EP93XX_EXT_CLK_RATE;
+ else
+ return EP93XX_EXT_CLK_RATE / 2;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
unsigned long long rate;
int i;
- rate = 14745600;
+ rate = EP93XX_EXT_CLK_RATE;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = 14745600;
+ clk_pll1.rate = EP93XX_EXT_CLK_RATE;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = 14745600;
+ clk_pll2.rate = EP93XX_EXT_CLK_RATE;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while ((signed long)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
/*
* Memory Map definitions
*/
-/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
-# define GEMINI_SRAM_BASE 0x20000000
+# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000
#ifndef _IMX_GPIO_H
#include <linux/kernel.h>
+#include <mach/hardware.h>
#include <mach/imx-regs.h>
#define IMX_GPIO_ALLOC_MODE_NORMAL 0
IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
}
-cycle_t imx_get_cycles(void)
+cycle_t imx_get_cycles(struct clocksource *cs)
{
return IMX_TCN(TIMER_BASE);
}
.rate = 14745600,
};
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,
/*
* clocksource
*/
-cycle_t ixp4xx_get_cycles(void)
+cycle_t ixp4xx_get_cycles(struct clocksource *cs)
{
return *IXP4XX_OSTS;
}
}
if (!found)
- return -ENOSYS;
+ return -ENODEV;
return 0;
}
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/mvsdio.h>
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource kirkwood_i2c_resources[] = {
{
- .name = "i2c",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c",
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+#endif
* published by the Free Software Foundation.
*/
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
* warranty of any kind, whether express or implied.
*/
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-
/*
* Register Map
*/
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include <asm/gpio.h>
#include "common.h"
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
+ MPP4_SATA1_ACTn,
+ MPP5_SATA0_ACTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_SATA1_PRESENTn,
- MPP23_SATA0_PRESENTn,
0
};
/* IO_START and IO_BASE are defined in hardware.h */
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */
#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
/* Define the interface to the SYS_CLOCK */
/*
* CPU Address Decode Windows registers
*/
+#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4))
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
--- /dev/null
+/*
+ * arch/arm/mach-loki/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/loki.h>
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR 0x0004
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF 0x0000
+#define IRQ_MASK_OFF 0x0004
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR 0x0004
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_OFF 0x0000
-#define IRQ_MASK_OFF 0x0004
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x1 << 13)
+#define MFP_DRIVE_MEDIUM (0x2 << 13)
+#define MFP_DRIVE_FAST (0x3 << 13)
+
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
* possible, we make the following compromise:
*
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ * - the reserved bit differs between pxa168 and pxa910, and the
+ * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
* 3. Override MFP_CFG() and MFP_CFG_DRV()
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
*/
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x2 << 13)
-#define MFP_DRIVE_MEDIUM (0x4 << 13)
-#define MFP_DRIVE_FAST (0x8 << 13)
-
#undef MFP_CFG
#undef MFP_CFG_DRV
#undef MFP_CFG_LPM
.set_mode = timer_set_mode,
};
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
{
return timer_read();
}
return IRQ_HANDLED;
}
-static cycle_t msm_gpt_read(void)
+static cycle_t msm_gpt_read(struct clocksource *cs)
{
return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
}
-static cycle_t msm_dgt_read(void)
+static cycle_t msm_dgt_read(struct clocksource *cs)
{
return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
}
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource mv78xx0_i2c_0_resources[] = {
{
- .name = "i2c 0 base",
.start = I2C_0_PHYS_BASE,
.end = I2C_0_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 0 irq",
.start = IRQ_MV78XX0_I2C_0,
.end = IRQ_MV78XX0_I2C_0,
.flags = IORESOURCE_IRQ,
static struct resource mv78xx0_i2c_1_resources[] = {
{
- .name = "i2c 1 base",
.start = I2C_1_PHYS_BASE,
.end = I2C_1_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 1 irq",
.start = IRQ_MV78XX0_I2C_1,
.end = IRQ_MV78XX0_I2C_1,
.flags = IORESOURCE_IRQ,
--- /dev/null
+/*
+ * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/mv78xx0.h>
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH 0x00020000
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF 0x0000
+#define IRQ_CAUSE_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_ERR_OFF 0x000c
+#define IRQ_MASK_LOW_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define L2_WRITETHROUGH 0x00020000
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_ERR_OFF 0x0000
-#define IRQ_CAUSE_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0008
-#define IRQ_MASK_ERR_OFF 0x000c
-#define IRQ_MASK_LOW_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID 0x6381
-#define MV78X00_REV_Z0 1
-
-#define MV78100_DEV_ID 0x7810
-#define MV78100_REV_A0 1
-
-#define MV78200_DEV_ID 0x7820
-#define MV78200_REV_A0 1
/*
* Register Map
#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID 0x6381
+#define MV78X00_REV_Z0 1
+
+#define MV78100_DEV_ID 0x7810
+#define MV78100_REV_A0 1
+
+#define MV78200_DEV_ID 0x7820
+#define MV78200_REV_A0 1
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/gpio.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
#include <mach/iomux.h>
#include "devices.h"
* I2C
*/
-#ifdef CONFIG_I2C_IMX
static int i2c_pins[] = {
PA15_PF_I2C_SDA,
PA16_PF_I2C_SCL,
.platform_data = &pcf857x_data[1],
},
};
-#endif
/*
* Board init
mxc_register_device(&flash_device, &mx1ads_flash_data);
/* I2C */
-#ifdef CONFIG_I2C_IMX
i2c_register_board_info(0, mx1ads_i2c_devices,
ARRAY_SIZE(mx1ads_i2c_devices));
mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
}
static void __init mx1ads_timer_init(void)
.con_id = n, \
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
/* It's unlikely that any driver wants one of them directly:
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
- _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
- _REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
_REGISTER_CLOCK(NULL, "owire", owire_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
+ depends on MFD_WM8350_I2C
+ depends on REGULATOR_WM8350
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+ regulator_has_full_constraints();
+
return 0;
}
mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
- /* SMSC9215 IRQ pin */
+ /* LAN9217 IRQ pin */
if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
"pcm037-eth"))
- gpio_direction_input(MX31_PIN_GPIO3_1);
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
qong_init_dnet();
}
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
- mxc_map_io();
- iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
/*
* Board specific initialization.
*/
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = qong_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
.handler = netx_timer_interrupt,
};
-cycle_t netx_get_cycles(void)
+cycle_t netx_get_cycles(struct clocksource *cs)
{
return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
}
#define TIMER_CLOCKEVENT 1
static u32 latch;
-static cycle_t ns9360_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(struct clocksource *cs)
{
return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
}
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
static int mmc_late_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+ int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return ret;
return ret;
}
-static void mmc_shutdown(struct device *dev)
+static void mmc_cleanup(struct device *dev)
{
gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
}
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
- .shutdown = mmc_shutdown,
+ .cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
-#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
.resource = h3_kp_resources,
};
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x26))) {
- printk(KERN_ERR "Error reading from I/O EXPANDER \n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDA */
- if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x03;
-
- if (mode & IR_SIRMODE) {
- expa |= 0x01;
- } else { /* MIR/FIR */
- expa |= 0x03;
- }
-
- if ((err = write_gpio_expa(expa, 0x27)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h3_transceiver_mode,
- .select_irda = h3_select_irda,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
-};
-
-static struct resource h3_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
- .name = "omapirda",
- .id = 0,
- .dev = {
- .platform_data = &h3_irda_data,
- .dma_mask = &irda_dmamask,
- },
- .num_resources = ARRAY_SIZE(h3_irda_resources),
- .resource = h3_irda_resources,
-};
-
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
&nand_device,
&smc91x_device,
&intlat_device,
- &h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
- else
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
-
+ gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
return 0;
}
static int omap1_clk_enable(struct clk *clk)
{
int ret = 0;
+
if (clk->usecount++ == 0) {
- if (likely(clk->parent)) {
+ if (clk->parent) {
ret = omap1_clk_enable(clk->parent);
-
- if (unlikely(ret != 0)) {
- clk->usecount--;
- return ret;
- }
+ if (ret)
+ goto err;
if (clk->flags & CLOCK_NO_IDLE_PARENT)
omap1_clk_deny_idle(clk->parent);
}
ret = clk->ops->enable(clk);
-
- if (unlikely(ret != 0) && clk->parent) {
- omap1_clk_disable(clk->parent);
- clk->usecount--;
+ if (ret) {
+ if (clk->parent)
+ omap1_clk_disable(clk->parent);
+ goto err;
}
}
+ return ret;
+err:
+ clk->usecount--;
return ret;
}
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (dsp_use++ == 0) {
- api_clk = clk_get(NULL, "api_clk");
- dsp_clk = clk_get(NULL, "dsp_clk");
+ api_clk = clk_get(NULL, "api_ck");
+ dsp_clk = clk_get(NULL, "dsp_ck");
if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
clk_enable(api_clk);
clk_enable(dsp_clk);
.handler = omap_mpu_timer2_interrupt,
};
-static cycle_t mpu_read(void)
+static cycle_t mpu_read(struct clocksource *cs)
{
return ~omap_mpu_timer_read(1);
}
#include <mach/control.h>
#include <mach/gpio.h>
-#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
-#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
.resource = &h4_flash_resource,
};
-/* Select between the IrDA and aGPS module
- */
-static int h4_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x21))) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDa */
- if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x01;
-
- if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
- expa |= 0x01;
- }
-
- if ((err = write_gpio_expa(expa, 0x20)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h4_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h4_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h4_transceiver_mode,
- .select_irda = h4_select_irda,
- .rx_channel = OMAP24XX_DMA_UART3_RX,
- .tx_channel = OMAP24XX_DMA_UART3_TX,
- .dest_start = OMAP_UART3_BASE,
- .src_start = OMAP_UART3_BASE,
- .tx_trigger = OMAP24XX_DMA_UART3_TX,
- .rx_trigger = OMAP24XX_DMA_UART3_RX,
-};
-
-static struct resource h4_irda_resources[] = {
- [0] = {
- .start = INT_24XX_UART3_IRQ,
- .end = INT_24XX_UART3_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h4_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &h4_irda_data,
- },
- .num_resources = 1,
- .resource = h4_irda_resources,
-};
-
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
- &h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include <mach/timer-gp.h>
#include "mmc-twl4030.h"
{
omap2_init_common_hw(NULL);
omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
omap_gpio_init();
}
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
}, \
}
-#define CK_243X (1 << 0)
-#define CK_242X (1 << 1)
+#define CK_243X RATE_IN_243X
+#define CK_242X RATE_IN_242X
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
- CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
- CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
- CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
+ CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X),
+ CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+ CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+ CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
- CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
+ CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
{
struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate, cpu_mask;
+ u32 clkrate;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
clk_init(&omap2_clk_functions);
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
-
- cpu_mask = 0;
- if (cpu_is_omap2420())
- cpu_mask |= CK_242X;
- if (cpu_is_omap2430())
- cpu_mask |= CK_243X;
-
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
.clkdm_name = "wkup_clkdm",
};
+static struct clk secure_32k_ck = {
+ .name = "secure_32k_ck",
+ .ops = &clkops_null,
+ .rate = 32768,
+ .flags = RATE_FIXED,
+ .clkdm_name = "wkup_clkdm",
+};
+
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
+ .parent = &secure_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
- CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
- CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
- CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
- CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
- CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
- CLK(NULL, "dss_ick", &dss_ick, CK_343X),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
+ CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
+ CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
+ CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
+ CLK("omapfb", "ick", &dss_ick, CK_343X),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
static struct clk cam_mclk = {
.name = "cam_mclk",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
/* SECURE_32K_FCK clocks */
-/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-#include <mach/eac.h>
#include <mach/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
- platform_device_register(&omap2_mcspi3);
+ if (cpu_is_omap2430() || cpu_is_omap343x())
+ platform_device_register(&omap2_mcspi3);
#endif
#ifdef CONFIG_ARCH_OMAP3
- platform_device_register(&omap2_mcspi4);
+ if (cpu_is_omap343x())
+ platform_device_register(&omap2_mcspi4);
#endif
}
static inline void omap_init_mcspi(void) {}
#endif
-#ifdef CONFIG_SND_OMAP24XX_EAC
-
-#define OMAP2_EAC_BASE 0x48090000
-
-static struct resource omap2_eac_resources[] = {
- {
- .start = OMAP2_EAC_BASE,
- .end = OMAP2_EAC_BASE + 0x109,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap2_eac_device = {
- .name = "omap24xx-eac",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap2_eac_resources),
- .resource = omap2_eac_resources,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-void omap_init_eac(struct eac_platform_data *pdata)
-{
- omap2_eac_device.dev.platform_data = pdata;
- platform_device_register(&omap2_eac_device);
-}
-
-#else
-void omap_init_eac(struct eac_platform_data *pdata) {}
-#endif
-
#ifdef CONFIG_OMAP_SHA1_MD5
static struct resource sha1_md5_resources[] = {
{
u32 sir, spurious;
sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
- spurious = sir >> 6;
+ spurious = sir >> 7;
- if (spurious > 1) {
+ if (spurious) {
printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
"posted write for irq %i\n",
irq, sir, previous_irq);
/* PM_PREPWSTST_CAM specific bits */
/* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4
/* RM_RSTST_PER specific bits */
*
* OMAP2 GP timer support.
*
+ * Copyright (C) 2009 Nokia Corporation
+ *
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID 12
+
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
+static u8 __initdata gptimer_id = 1;
+static u8 __initdata inited;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
.set_mode = omap2_gp_timer_set_mode,
};
+/**
+ * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
+ * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
+ *
+ * Define the GPTIMER that the system should use for the tick timer.
+ * Meant to be called from board-*.c files in the event that GPTIMER1, the
+ * default, is unsuitable. Returns -EINVAL on error or 0 on success.
+ */
+int __init omap2_gp_clockevent_set_gptimer(u8 id)
+{
+ if (id < 1 || id > MAX_GPTIMER_ID)
+ return -EINVAL;
+
+ BUG_ON(inited);
+
+ gptimer_id = id;
+
+ return 0;
+}
+
static void __init omap2_gp_clockevent_init(void)
{
u32 tick_rate;
+ int src;
+
+ inited = 1;
- gptimer = omap_dm_timer_request_specific(1);
+ gptimer = omap_dm_timer_request_specific(gptimer_id);
BUG_ON(gptimer == NULL);
#if defined(CONFIG_OMAP_32K_TIMER)
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ src = OMAP_TIMER_SRC_32_KHZ;
#else
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ src = OMAP_TIMER_SRC_SYS_CLK;
+ WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
+ "secure 32KiHz clock source\n");
#endif
+
+ if (gptimer_id != 12)
+ WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
+ "timer-gp: omap_dm_timer_set_source() failed\n");
+
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
+ gptimer_id, tick_rate);
+
omap2_gp_timer_irq.dev_id = (void *)gptimer;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
clockevents_register_device(&clockevent_gpt);
}
+/* Clocksource code */
+
#ifdef CONFIG_OMAP_32K_TIMER
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
* clocksource
*/
static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(void)
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
}
.power = 50, /* up to 100 mA */
};
-static u64 musb_dmamask = DMA_32BIT_MASK;
+static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = {
.name = "musb_hdrc",
.id = -1,
.dev = {
.dma_mask = &musb_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &musb_plat,
},
.num_resources = ARRAY_SIZE(musb_resources),
};
#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
unsigned sysclk_ps;
int status;
- if (!refclk_psec)
+ if (!refclk_psec || fclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
/*
* Helpers to get DDR bank info
*/
+#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
+#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource orion5x_i2c_resources[] = {
{
- .name = "i2c base",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c irq",
.start = IRQ_ORION5X_I2C,
.end = IRQ_ORION5X_I2C,
.flags = IORESOURCE_IRQ,
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/bridge-regs.h
+ *
+ * Orion CPU Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/orion5x.h>
+
+#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100)
+
+#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
+
+#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET 0x0002
+
+#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+
+#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+
+#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define WDT_INT_REQ 0x0008
+
+#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
+
+#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
+
+#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000
#define ORION5X_PCI_MEM_SIZE SZ_128M
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID 0x5181
-#define MV88F5181_REV_B1 3
-#define MV88F5181L_REV_A0 8
-#define MV88F5181L_REV_A1 9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID 0x5182
-#define MV88F5182_REV_A2 2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID 0x5281
-#define MV88F5281_REV_D0 4
-#define MV88F5281_REV_D1 5
-#define MV88F5281_REV_D2 6
-/* Orion-1-90 (88F6183) */
-#define MV88F6183_DEV_ID 0x6183
-#define MV88F6183_REV_B0 3
-
/*******************************************************************************
* Orion Registers Map
******************************************************************************/
+
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
-#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x))
#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
-#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x))
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x))
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x))
/*******************************************************************************
* Device Bus Registers
#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0)
#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4)
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108)
-#define WDT_RESET 0x0002
-#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110)
-#define WDT_INT_REQ 0x0008
-#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
-
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID 0x5181
+#define MV88F5181_REV_B1 3
+#define MV88F5181L_REV_A0 8
+#define MV88F5181L_REV_A1 9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID 0x5182
+#define MV88F5182_REV_A2 2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D0 4
+#define MV88F5281_REV_D1 5
+#define MV88F5281_REV_D2 6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID 0x6183
+#define MV88F6183_REV_B0 3
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/gpio.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* PCI controller
****************************************************************************/
+#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
#define PCI_MODE ORION5X_PCI_REG(0xd00)
#define PCI_CMD ORION5X_PCI_REG(0xc00)
#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
bool "PXA based Palm PDAs"
select HAVE_PWM
+config MACH_PALMTE2
+ bool "Palm Tungsten|E2"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+ handheld computer.
+
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
obj-$(CONFIG_MACH_E750) += e750.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
+obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
/* UCB1400 touchscreen controller */
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx2xx_ts_device = {
- .name = "ucb1400_ts",
+ .name = "ucb1400_core",
.id = -1,
};
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#if defined(CONFIG_AX88796)
#define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO)
+
/*
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2
+ .flags = 0, /* defined later */
+ .wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
static void __init colibri_pxa300_init_eth(void)
{
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config));
- set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <net/ax88796.h>
+#include <linux/interrupt.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
* Asix AX88796 Ethernet
*/
static struct ax_plat_data colibri_asix_platdata = {
- .flags = AXFLG_MAC_FROMDEV,
- .wordlength = 2
+ .flags = 0, /* defined later */
+ .wordlength = 2,
};
static struct resource colibri_asix_resource[] = {
[1] = {
.start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
.end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
static void __init colibri_pxa320_init_eth(void)
{
+ colibri_pxa3xx_init_eth(&colibri_asix_platdata);
pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config));
- set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING);
platform_device_register(&asix_device);
}
#else
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/etherdevice.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/sizes.h>
#include "generic.h"
#include "devices.h"
+#if defined(CONFIG_AX88796)
+#define ETHER_ADDR_LEN 6
+static u8 ether_mac_addr[ETHER_ADDR_LEN];
+
+void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
+{
+ int i;
+ u64 serial = ((u64) system_serial_high << 32) | system_serial_low;
+
+ /*
+ * If the bootloader passed in a serial boot tag, which contains a
+ * valid ethernet MAC, pass it to the interface. Toradex ships the
+ * modules with their own bootloader which provides a valid MAC
+ * this way.
+ */
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ ether_mac_addr[i] = serial & 0xff;
+ serial >>= 8;
+ }
+
+ if (is_valid_ether_addr(ether_mac_addr)) {
+ plat_data->flags |= AXFLG_MAC_FROMPLATFORM;
+ plat_data->mac_addr = ether_mac_addr;
+ printk(KERN_INFO "%s(): taking MAC from serial boot tag\n",
+ __func__);
+ } else {
+ plat_data->flags |= AXFLG_MAC_FROMDEV;
+ printk(KERN_INFO "%s(): no valid serial boot tag found, "
+ "taking MAC from device\n", __func__);
+ }
+}
+#endif
+
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
static int mmc_detect_pin;
.num_chipselect = 3,
};
+static void corgi_wait_for_hsync(void)
+{
+ while (gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
+ .wait_for_sync = corgi_wait_for_hsync,
};
static void corgi_ads7846_cs(u32 command)
#include <linux/input.h>
#include <linux/leds.h>
+#include <asm/mach-types.h>
+
static struct gpio_keys_button csb701_buttons[] = {
{
.code = 0x7,
static int __init csb701_init(void)
{
+ if (!machine_is_csb726())
+ return -ENODEV;
+
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
}
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+ .gpio_pullup = -1,
+ .gpio_vbus = -1,
+};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
#include <mach/udc.h>
#include <mach/irda.h>
#include <mach/irqs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
+ pxa_set_ac97_info(NULL);
e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
+#include <mach/audio.h>
#include "generic.h"
#include "eseries.h"
eseries_get_tmio_gpios();
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e800_udc_mach_info);
+ pxa_set_ac97_info(NULL);
}
MACHINE_START(E800, "Toshiba e800")
#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
+#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
#define GPIO93_CAM_RESET (93)
#define GPIO41_ETHIRQ (41)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
+#define GPIO115_WLAN_PWEN (115)
+#define GPIO19_WLAN_STRAP (19)
static int mmc_cd;
static int nand_rb;
GPIO57_SSP1_TXD,
/* SSP2 */
- GPIO19_SSP2_SCLK,
- GPIO14_SSP2_SFRM,
+ GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
+ GPIO14_GPIO,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
};
static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
- .rx_threshold = 1,
- .tx_threshold = 1,
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .gpio_cs = -1,
};
static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
.model = TDO35S,
};
+static struct pxa2xx_spi_master em_x270_spi_2_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_chip em_x270_libertas_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 1000,
+};
+
+static unsigned long em_x270_libertas_pin_config[] = {
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_GPIO,
+ GPIO89_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+};
+
+static int em_x270_libertas_setup(struct spi_device *spi)
+{
+ int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN");
+ if (err)
+ return err;
+
+ gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+ mdelay(100);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config));
+
+ gpio_direction_output(GPIO115_WLAN_PWEN, 0);
+ mdelay(100);
+ gpio_set_value(GPIO115_WLAN_PWEN, 1);
+ mdelay(100);
+
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+}
+
+static int em_x270_libertas_teardown(struct spi_device *spi)
+{
+ gpio_set_value(GPIO115_WLAN_PWEN, 0);
+ gpio_free(GPIO115_WLAN_PWEN);
+
+ return 0;
+}
+
+struct libertas_spi_platform_data em_x270_libertas_pdata = {
+ .use_dummy_writes = 1,
+ .gpio_cs = 14,
+ .setup = em_x270_libertas_setup,
+ .teardown = em_x270_libertas_teardown,
+};
+
static struct spi_board_info em_x270_spi_devices[] __initdata = {
{
- .modalias = "tdo24m",
- .max_speed_hz = 1000000,
- .bus_num = 1,
- .chip_select = 0,
- .controller_data = &em_x270_tdo24m_chip,
- .platform_data = &em_x270_tdo24m_pdata,
+ .modalias = "tdo24m",
+ .max_speed_hz = 1000000,
+ .bus_num = 1,
+ .chip_select = 0,
+ .controller_data = &em_x270_tdo24m_chip,
+ .platform_data = &em_x270_tdo24m_pdata,
+ },
+ {
+ .modalias = "libertas_spi",
+ .max_speed_hz = 13000000,
+ .bus_num = 2,
+ .irq = IRQ_GPIO(116),
+ .chip_select = 0,
+ .controller_data = &em_x270_libertas_chip,
+ .platform_data = &em_x270_libertas_pdata,
},
};
static void __init em_x270_init_spi(void)
{
pxa2xx_set_spi_info(1, &em_x270_spi_info);
+ pxa2xx_set_spi_info(2, &em_x270_spi_2_info);
spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices));
}
#else
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
- GPIO1_GPIO, /* pcap interrupt */
- GPIO4_GPIO, /* WDI_AP */
- GPIO55_GPIO, /* SYS_RESTART */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
+ GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
+ GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO12_GPIO,
+ GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
- GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO57_GPIO, /* AP_RDY */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
- GPIO82_GPIO, /* RESET */
- GPIO99_GPIO, /* TC_MM_EN */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
+ GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
+ GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO15_GPIO,
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
- GPIO10_GPIO,
+ GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO96_GPIO, /* AP_RDY */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO116_GPIO, /* RESET */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */
extern void __init pxa_init_irq(int irq_nr,
int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
*/
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
{ /* UCAM sensor board */
- .type = "max1238",
+ .type = "max1239",
.addr = 0x35,
}, { /* ITS400 Sensor board only */
.type = "max1363",
#include <sound/core.h>
#include <sound/pcm.h>
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ * a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
typedef struct {
int (*startup)(struct snd_pcm_substream *, void *);
void (*shutdown)(struct snd_pcm_substream *, void *);
void (*suspend)(void *);
void (*resume)(void *);
void *priv;
+ int reset_gpio;
} pxa2xx_audio_ops_t;
extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
#ifndef _COLIBRI_H_
#define _COLIBRI_H_
+
+#include <net/ax88796.h>
+
/*
* common settings for all modules
*/
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
extern void colibri_pxa3xx_init_lcd(int bl_pin);
#else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
+#endif
+
+#if defined(CONFIG_AX88796)
+extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
#endif
/* physical memory regions */
#define GPIO22_MAGICIAN_VIBRA_EN 22
#define GPIO26_MAGICIAN_GSM_POWER 26
#define GPIO27_MAGICIAN_USBC_PUEN 27
-#define GPIO30_MAGICIAN_nCHARGE_EN 30
+#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30
#define GPIO37_MAGICIAN_KEY_HANGUP 37
#define GPIO38_MAGICIAN_KEY_CONTACTS 38
#define GPIO40_MAGICIAN_GSM_OUT2 40
#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
-#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
#ifndef _INCLUDE_PALMASOC_H_
#define _INCLUDE_PALMASOC_H_
+
struct palm27x_asoc_info {
int jack_gpio;
};
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
#endif
#define PALMLD_IDE_SIZE 0x00100000
#define PALMLD_PHYS_IO_START 0x40000000
+#define PALMLD_STR_BASE 0xa0200000
/* BATTERY */
#define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
/* USB */
#define GPIO_NR_PALMT5_USB_DETECT_N 15
-#define GPIO_NR_PALMT5_USB_POWER 95
#define GPIO_NR_PALMT5_USB_PULLUP 93
/* LCD/BACKLIGHT */
/* Various addresses */
#define PALMT5_PHYS_RAM_START 0xa0000000
#define PALMT5_PHYS_IO_START 0x40000000
+#define PALMT5_STR_BASE 0xa0200000
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
--- /dev/null
+/*
+ * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTE2_H_
+#define _INCLUDE_PALMTE2_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTE2_POWER_DETECT 9
+#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4
+#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15
+
+/* SD/MMC */
+#define GPIO_NR_PALMTE2_SD_DETECT_N 10
+#define GPIO_NR_PALMTE2_SD_POWER 55
+#define GPIO_NR_PALMTE2_SD_READONLY 51
+
+/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTE2_IR_DISABLE 48
+
+/* USB */
+#define GPIO_NR_PALMTE2_USB_DETECT_N 35
+#define GPIO_NR_PALMTE2_USB_PULLUP 53
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTE2_BL_POWER 56
+#define GPIO_NR_PALMTE2_LCD_POWER 37
+
+/* KEYS */
+#define GPIO_NR_PALMTE2_KEY_NOTES 5
+#define GPIO_NR_PALMTE2_KEY_TASKS 7
+#define GPIO_NR_PALMTE2_KEY_CALENDAR 11
+#define GPIO_NR_PALMTE2_KEY_CONTACTS 13
+#define GPIO_NR_PALMTE2_KEY_CENTER 14
+#define GPIO_NR_PALMTE2_KEY_LEFT 19
+#define GPIO_NR_PALMTE2_KEY_RIGHT 20
+#define GPIO_NR_PALMTE2_KEY_DOWN 21
+#define GPIO_NR_PALMTE2_KEY_UP 22
+
+/** HERE ARE INIT VALUES **/
+
+/* BACKLIGHT */
+#define PALMTE2_MAX_INTENSITY 0xFE
+#define PALMTE2_DEFAULT_INTENSITY 0x7E
+#define PALMTE2_LIMIT_MASK 0x7F
+#define PALMTE2_PRESCALER 0x3F
+#define PALMTE2_PERIOD_NS 3500
+
+/* BATTERY */
+#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */
+#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */
+#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */
+
+#endif
/* USB */
#define GPIO_NR_PALMTX_USB_DETECT_N 13
-#define GPIO_NR_PALMTX_USB_POWER 95
#define GPIO_NR_PALMTX_USB_PULLUP 93
/* LCD/BACKLIGHT */
#define PALMTX_PHYS_RAM_START 0xa0000000
#define PALMTX_PHYS_IO_START 0x40000000
+#define PALMTX_STR_BASE 0xa0200000
+
#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
/**
* init_gpio_reset() - register GPIO as reset generator
* @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
*/
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
#endif /* __ASM_ARCH_RESET_H */
},
};
+static struct da9034_touch_pdata littleton_da9034_touch = {
+ .x_inverted = 1,
+ .interval_ms = 20,
+};
+
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ }, {
+ .name = "da9034-touch",
+ .id = DA9034_ID_TOUCH,
+ .platform_data = &littleton_da9034_touch,
},
};
#include <linux/mtd/physmap.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
+#include <linux/regulator/bq24022.h>
+#include <linux/regulator/machine.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
static int power_supply_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
- if (ret)
- goto err_cs_ac;
- ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
- if (ret)
- goto err_cs_usb;
- ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
- if (ret)
- goto err_chg_en;
- ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
- if (!ret)
- ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
- if (ret)
- goto err_nchg_en;
-
- return 0;
-
-err_nchg_en:
- gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
-err_chg_en:
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
-err_cs_usb:
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
-err_cs_ac:
- return ret;
+ return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
}
static int magician_is_ac_online(void)
return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
-static int magician_is_usb_online(void)
-{
- return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB);
-}
-
-static void magician_set_charge(int flags)
-{
- gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags);
- gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
- gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
}
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = magician_is_ac_online,
- .is_usb_online = magician_is_usb_online,
- .set_charge = magician_set_charge,
.exit = power_supply_exit,
.supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
.num_resources = ARRAY_SIZE(power_supply_resources),
};
+/*
+ * Battery charger
+ */
+
+static struct regulator_consumer_supply bq24022_consumers[] = {
+ {
+ .dev = &gpio_vbus.dev,
+ .supply = "vbus_draw",
+ },
+ {
+ .dev = &power_supply.dev,
+ .supply = "ac_draw",
+ },
+};
+
+static struct regulator_init_data bq24022_init_data = {
+ .constraints = {
+ .max_uA = 500000,
+ .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
+};
+
+static struct bq24022_mach_info bq24022_info = {
+ .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
+ .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2,
+ .init_data = &bq24022_init_data,
+};
+
+static struct platform_device bq24022 = {
+ .name = "bq24022",
+ .id = -1,
+ .dev = {
+ .platform_data = &bq24022_info,
+ },
+};
/*
* MMC/SD
&egpio,
&backlight,
&pasic3,
+ &bq24022,
&gpio_vbus,
&power_supply,
&strataflash,
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
+ saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
}
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
+ PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
return 0;
if (cpu_is_pxa27x())
pxa27x_mfp_init();
+ /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+ PSSR = PSSR_RDH;
+
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
#include <mach/pxa27x-udc.h>
#include <mach/i2c.h>
#include <mach/camera.h>
+#include <mach/audio.h>
#include <media/soc_camera.h>
#include <mach/mioa701.h>
.fast_mode = 1,
};
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+ .reset_gpio = 95,
+};
+
/*
* Mio global
*/
&mioa701_backlight_data);
MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
-MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL)
-MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
&mioa701_backlight,
&mioa701_led,
&pxa2xx_pcm,
- &pxa2xx_ac97,
- &mio_wm9713_codec,
&mioa701_sound,
&power_dev,
&strataflash,
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
+ pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
+#include <linux/sysdev.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO108_GPIO, /* ir disable */
GPIO47_FICP_TXD,
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
/******************************************************************************
* aSoC audio
******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
};
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmld_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+};
+
+static int __init palmld_pm_init(void)
+{
+ int i;
+
+ /* this is where the bootloader jumps */
+ addr = phys_to_virt(PALMLD_STR_BASE);
+
+ for (i = 0; i < 3; i++)
+ addr[i] = resume[i];
+
+ return 0;
+}
+
+device_initcall(palmld_pm_init);
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
&palmld_backlight,
&palmld_leds,
&power_supply,
+ &palmld_asoc,
};
static struct map_desc palmld_io_desc[] __initdata = {
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&palmld_ac97_pdata);
pxa_set_ficp_info(&palmld_ficp_platform_data);
pxa_set_keypad_info(&palmld_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
- palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
/* USB */
GPIO15_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
/******************************************************************************
* aSoC audio
******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
};
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmt5_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+};
+
+static int __init palmt5_pm_init(void)
+{
+ int i;
+
+ /* this is where the bootloader jumps */
+ addr = phys_to_virt(PALMT5_STR_BASE);
+
+ for (i = 0; i < 3; i++)
+ addr[i] = resume[i];
+
+ return 0;
+}
+
+device_initcall(palmt5_pm_init);
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
#endif
&palmt5_backlight,
&power_supply,
+ &palmt5_asoc,
};
/* setup udc GPIOs initial state */
static void __init palmt5_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
}
}
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
palmt5_udc_init();
+ pxa_set_ac97_info(&palmt5_ac97_pdata);
pxa_set_udc_info(&palmt5_udc_info);
- pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmt5_ficp_platform_data);
pxa_set_keypad_info(&palmt5_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
- palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
--- /dev/null
+/*
+ * Hardware definitions for Palm Tungsten|E2
+ *
+ * Author:
+ * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmte2.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmte2_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO10_GPIO, /* SD detect */
+ GPIO55_GPIO, /* SD power */
+ GPIO51_GPIO, /* SD r/o switch */
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* PWM */
+ GPIO16_PWM0_OUT,
+
+ /* USB */
+ GPIO15_GPIO, /* usb detect */
+ GPIO53_GPIO, /* usb power */
+
+ /* IrDA */
+ GPIO48_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* GPIO KEYS */
+ GPIO5_GPIO, /* notes */
+ GPIO7_GPIO, /* tasks */
+ GPIO11_GPIO, /* calendar */
+ GPIO13_GPIO, /* contacts */
+ GPIO14_GPIO, /* center */
+ GPIO19_GPIO, /* left */
+ GPIO20_GPIO, /* right */
+ GPIO21_GPIO, /* down */
+ GPIO22_GPIO, /* up */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+ GPIO4_GPIO, /* Hotsync button */
+ GPIO9_GPIO, /* power detect */
+ GPIO37_GPIO, /* LCD power */
+ GPIO56_GPIO, /* Backlight power */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmte2_mci_init(struct device *dev,
+ irq_handler_t palmte2_detect_int, void *data)
+{
+ int err = 0;
+
+ /* Setup an interrupt for detecting card insert/remove events */
+ err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
+ palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "SD/MMC card detect", data);
+ if (err) {
+ printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+ __func__);
+ goto err2;
+ }
+
+ err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
+ if (err)
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
+ if (err)
+ goto err4;
+
+ err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
+ if (err)
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
+ if (err)
+ goto err5;
+
+ printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+ return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+err4:
+ gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+err:
+ return err;
+}
+
+static void palmte2_mci_exit(struct device *dev, void *data)
+{
+ gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
+ gpio_free(GPIO_NR_PALMTE2_SD_POWER);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
+}
+
+static void palmte2_mci_power(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+ gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmte2_mci_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmte2_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .setpower = palmte2_mci_power,
+ .get_ro = palmte2_mci_get_ro,
+ .init = palmte2_mci_init,
+ .exit = palmte2_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmte2_pxa_buttons[] = {
+ {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" },
+ {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" },
+ {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" },
+ {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" },
+ {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" },
+ {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" },
+ {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" },
+ {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" },
+ {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" },
+};
+
+static struct gpio_keys_platform_data palmte2_pxa_keys_data = {
+ .buttons = palmte2_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons),
+};
+
+static struct platform_device palmte2_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmte2_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmte2_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
+ if (ret)
+ goto err2;
+ ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
+ if (ret)
+ goto err3;
+
+ return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+err2:
+ gpio_free(GPIO_NR_PALMTE2_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmte2_backlight_notify(int brightness)
+{
+ gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
+ gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
+ return brightness;
+}
+
+static void palmte2_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_BL_POWER);
+ gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmte2_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = PALMTE2_MAX_INTENSITY,
+ .dft_brightness = PALMTE2_MAX_INTENSITY,
+ .pwm_period_ns = PALMTE2_PERIOD_NS,
+ .init = palmte2_backlight_init,
+ .notify = palmte2_backlight_notify,
+ .exit = palmte2_backlight_exit,
+};
+
+static struct platform_device palmte2_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm0.dev,
+ .platform_data = &palmte2_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmte2_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmte2_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
+}
+
+static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
+{
+ gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
+ pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmte2_ficp_platform_data = {
+ .startup = palmte2_irda_startup,
+ .shutdown = palmte2_irda_shutdown,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = palmte2_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
+ .gpio_pullup_inverted = 0,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+err1:
+ return ret;
+}
+
+static int palmte2_is_ac_online(void)
+{
+ return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTE2_POWER_DETECT);
+}
+
+static char *palmte2_supplicants[] = {
+ "main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+ .init = power_supply_init,
+ .is_ac_online = palmte2_is_ac_online,
+ .exit = power_supply_exit,
+ .supplied_to = palmte2_supplicants,
+ .num_supplicants = ARRAY_SIZE(palmte2_supplicants),
+};
+
+static struct platform_device power_supply = {
+ .name = "pda-power",
+ .id = -1,
+ .dev = {
+ .platform_data = &power_supply_info,
+ },
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+ .batt_aux = WM97XX_AUX_ID3,
+ .temp_aux = WM97XX_AUX_ID2,
+ .charge_gpio = -1,
+ .max_voltage = PALMTE2_BAT_MAX_VOLTAGE,
+ .min_voltage = PALMTE2_BAT_MIN_VOLTAGE,
+ .batt_mult = 1000,
+ .batt_div = 414,
+ .temp_mult = 1,
+ .temp_div = 1,
+ .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .batt_name = "main-batt",
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmte2_lcd_modes[] = {
+{
+ .pixclock = 77757,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 28,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 5,
+
+ .hsync_len = 4,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmte2_lcd_screen = {
+ .modes = palmte2_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmte2_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &palmte2_pxa_keys,
+#endif
+ &palmte2_backlight,
+ &power_supply,
+};
+
+/* setup udc GPIOs initial state */
+static void __init palmte2_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTE2_USB_PULLUP);
+ }
+}
+
+static void __init palmte2_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
+
+ set_pxa_fb_info(&palmte2_lcd_screen);
+ pxa_set_mci_info(&palmte2_mci_platform_data);
+ palmte2_udc_init();
+ pxa_set_udc_info(&palmte2_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmte2_ficp_platform_data);
+ wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTE2, "Palm Tungsten|E2")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmte2_init
+MACHINE_END
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
+#include <mach/palmasoc.h>
#include "generic.h"
#include "devices.h"
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
/* USB */
GPIO13_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
GPIO116_GPIO, /* wifi ready */
/* MATRIX KEYPAD */
- GPIO100_KP_MKIN_0,
- GPIO101_KP_MKIN_1,
- GPIO102_KP_MKIN_2,
- GPIO97_KP_MKIN_3,
+ GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+ GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
.batt_name = "main-batt",
};
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmtx_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+/******************************************************************************
+ * Power management - standby
+ ******************************************************************************/
+#ifdef CONFIG_PM
+static u32 *addr __initdata;
+static u32 resume[3] __initdata = {
+ 0xe3a00101, /* mov r0, #0x40000000 */
+ 0xe380060f, /* orr r0, r0, #0x00f00000 */
+ 0xe590f008, /* ldr pc, [r0, #0x08] */
+};
+
+static int __init palmtx_pm_init(void)
+{
+ int i;
+
+ /* this is where the bootloader jumps */
+ addr = phys_to_virt(PALMTX_STR_BASE);
+
+ for (i = 0; i < 3; i++)
+ addr[i] = resume[i];
+
+ return 0;
+}
+
+device_initcall(palmtx_pm_init);
+#endif
+
/******************************************************************************
* Machine init
******************************************************************************/
#endif
&palmtx_backlight,
&power_supply,
+ &palmtx_asoc,
};
static struct map_desc palmtx_io_desc[] __initdata = {
/* setup udc GPIOs initial state */
static void __init palmtx_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
}
}
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
palmtx_udc_init();
+ pxa_set_ac97_info(&palmtx_ac97_pdata);
pxa_set_udc_info(&palmtx_udc_info);
- pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
#include <linux/i2c/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
- .gpio_base = NR_BUILTIN_GPIO + 1,
+ .gpio_base = NR_BUILTIN_GPIO,
};
static int gpio_bus_switch;
int ret;
if (!gpio_bus_switch) {
- ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+ ret = gpio_request(NR_BUILTIN_GPIO, "camera");
if (!ret) {
- gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+ gpio_bus_switch = NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
} else
gpio_bus_switch = -EINVAL;
static int reset_gpio = -1;
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
{
int rc;
}
if (output)
- rc = gpio_direction_output(gpio, 0);
+ rc = gpio_direction_output(gpio, level);
else
rc = gpio_direction_input(gpio);
if (rc) {
.num_chipselect = 3,
};
+static void spitz_wait_for_hsync(void)
+{
+ while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = SPITZ_GPIO_TP_INT,
+ .wait_for_sync = spitz_wait_for_hsync,
};
static void spitz_ads7846_cs(u32 command)
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
+static void spitz_ohci_exit(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
+ .exit = spitz_ohci_exit,
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
static void __init common_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+ init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
.set_mode = pxa_osmr0_set_mode,
};
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
{
return OSCR;
}
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
+#include <mach/audio.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
- init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
pxa_set_i2c_info(NULL);
+ pxa_set_ac97_info(NULL);
platform_scoop_config = &tosa_pcmcia_config;
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
+#include <mach/regs-uart.h>
#include <mach/viper.h>
#include <asm/setup.h>
GPIO25_AC97_SDATA_IN_0,
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO91_SSP3_SCLK,
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* GPIO */
+ GPIO18_GPIO, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO89_SSP3_SCLK,
.handler = realview_timer_interrupt,
};
-static cycle_t realview_get_cycles(void)
+static cycle_t realview_get_cycles(struct clocksource *cs)
{
return ~readl(timer3_va_base + TIMER_VALUE);
}
{
u32 val;
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- /*
- * The dummy clock device has to be registered before the main device
- * so that the latter will broadcast the clock events
- */
- local_timer_setup();
-#endif
-
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
/*
* We use IRQ1 as the IPI
*/
-static inline void smp_cross_call(cpumask_t callmap)
-{
- gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
{
+ gic_raise_softirq(mask, 1);
}
#endif
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 200;
+ clk->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DUMMY;
+ clk->rating = 400;
clk->mult = 1;
clk->set_mode = dummy_timer_set_mode;
clk->broadcast = smp_timer_broadcast;
{
trace_hardirqs_off();
- /*
- * the primary core may have used a "cross call" soft interrupt
- * to get this processor out of WFI in the BootMonitor - make
- * sure that we are no longer being sent this soft interrupt
- */
- smp_cross_call_done(cpumask_of_cpu(cpu));
-
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* Use smp_cross_call() for this, since there's little
* point duplicating the code here
*/
- smp_cross_call(cpumask_of_cpu(cpu));
+ smp_cross_call(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
if (max_cpus > ncores)
max_cpus = ncores;
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
/*
- * Enable the local timer for primary CPU. If the device is
- * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
- * realview_timer_init
+ * Enable the local timer or broadcast device for the boot CPU.
*/
local_timer_setup();
#endif
s3c_device_nand.dev.platform_data = &bast_nand_info;
- s3c_i2c0_set_platdata(&bast_i2c_info);
-
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
sysdev_class_register(&bast_pm_sysclass);
sysdev_register(&bast_pm_sysdev);
+ s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
-#include <plat/iic.h>
static struct map_desc jive_iodesc[] __initdata = {
};
#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
[0] = {
.width = LCD_XRES,
.height = LCD_YRES,
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
.displays = jive_vgg2432a4_display,
.num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
.default_display = 0,
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
{
unsigned long tmp;
+ flush_cache_all();
+
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
/* IDE channels */
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
.ioport_shift = 5,
};
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = osiris_map_io,
- .init_machine = osiris_init,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ gpio_request(S3C64XX_GPN(5), "LCD power");
+ gpio_request(S3C64XX_GPF(13), "LCD power");
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
.rate = 24000000,
};
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "dev:f1",
.clk = &ref24_clk,
.handler = versatile_timer_interrupt,
};
-static cycle_t versatile_get_cycles(void)
+static cycle_t versatile_get_cycles(struct clocksource *cs)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
+#ifdef CONFIG_ARM_ERRATA_411920
+/*
+ * Invalidate the entire I cache (this code is a workaround for the ARM1136
+ * erratum 411920 - Invalidate Instruction Cache operation can fail. This
+ * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *
+ * Registers:
+ * r0 - set to 0
+ * r1 - corrupted
+ */
+ENTRY(v6_icache_inval_all)
+ mov r0, #0
+ mrs r1, cpsr
+ cpsid ifa @ disable interrupts
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ msr cpsr_cx, r1 @ restore interrupts
+ .rept 11 @ ARM Ltd recommends at least
+ nop @ 11 NOPs
+ .endr
+ mov pc, lr
+#endif
+
/*
* v6_flush_cache_all()
*
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ b v6_icache_inval_all
+#endif
#else
mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
#endif
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ b v6_icache_inval_all
+#endif
#else
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
#include "mm.h"
+#ifdef CONFIG_ARM_ERRATA_411920
+extern void v6_icache_inval_all(void);
+#endif
+
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcr p15, 0, %2, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %2, c7, c5, 0\n"
+#endif
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
void flush_cache_mm(struct mm_struct *mm)
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
BOOTMEM_DEFAULT);
}
+ if (machine_is_palmld() || machine_is_palmtx()) {
+ reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+ reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+ }
+
+ if (machine_is_palmt5())
+ reserve_bootmem_node(pgdat, 0xa0200000, 0x1000,
+ BOOTMEM_EXCLUSIVE);
+
#ifdef CONFIG_SA1111
/*
* Because of the SA1111 DMA bug, we want to preserve our
*
* This is the "shell" of the ARMv6 processor support.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
.asciz "ARMv6-compatible processor"
.align
- .section ".text.init", #alloc, #execinstr
+ __INIT
/*
* __v6_setup
*
* This is the "shell" of the ARMv7 processor support.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_FLAGS
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
.ascii "ARMv7 Processor"
.align
- .section ".text.init", #alloc, #execinstr
+ __INIT
/*
* __v7_setup
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
- mov r10, #0
+
+ mrc p15, 0, r0, c0, c0, 0 @ read main ID register
+ and r10, r0, #0xff000000 @ ARM?
+ teq r10, #0x41000000
+ bne 2f
+ and r5, r0, #0x00f00000 @ variant
+ and r6, r0, #0x0000000f @ revision
+ orr r0, r6, r5, lsr #20-4 @ combine variant and revision
+
+#ifdef CONFIG_ARM_ERRATA_430973
+ teq r5, #0x00100000 @ only present in r1p*
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 6) @ set IBE to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_458693
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 5) @ set L1NEON to 1
+ orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_460075
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ tsteq r10, #1 << 22
+ orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+#endif
+
+2: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
mov pc, lr
- .section ".text.init", #alloc, #execinstr
+ __INIT
.type v6wbi_tlb_fns, #object
ENTRY(v6wbi_tlb_fns)
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
mov pc, lr
ENDPROC(v7wbi_flush_kern_tlb_range)
- .section ".text.init", #alloc, #execinstr
+ __INIT
.type v7wbi_tlb_fns, #object
ENTRY(v7wbi_tlb_fns)
extern unsigned int DoubleCPDO(struct roundingData *roundData,
const unsigned int opcode, FPREG * rFd);
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+ const unsigned int opcode, FPREG * rFd);
+
#endif
#include "fpmodule.inl"
#include "softfloat.h"
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
unsigned int PerformFLT(const unsigned int opcode);
unsigned int PerformFIX(const unsigned int opcode);
char floatx80_lt_quiet( floatx80, floatx80 );
char floatx80_is_signaling_nan( floatx80 );
+extern flag floatx80_is_nan(floatx80);
+
#endif
static inline flag extractFloat32Sign(float32 a)
local_irq_restore(flags);
return -EBUSY;
}
+ memset(imxdma, 0, sizeof(imxdma));
+ imxdma->name = name;
+ local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
- local_irq_restore(flags);
+ imxdma->name = NULL;
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
imxdma->watchdog.data = channel;
#endif
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
-
- local_irq_restore(flags);
return ret;
}
EXPORT_SYMBOL(imx_dma_request);
local_irq_save(flags);
/* Disable interrupts */
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
- DMA_BASE + DMA_CCR(channel));
+ imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
- BUG_ON(!irq_stat);
+
mxc_gpio_irq_handler(port, irq_stat);
}
#endif
/*
* Base address of PBC controller, CS4
*/
-#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
unsigned int flags;
};
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
#endif
*/
#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
-extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
/* all normal IRQs can be FIQs */
#define FIQ_START 0
#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS (6*32 + 16)
-
/* fixed interrupt numbers */
#define MXC_INT_USBCTRL 58
#define MXC_INT_USBCTRL 58
#define IIM_PROD_REV_SH 3
#define IIM_PROD_REV_LEN 5
-#ifdef CONFIG_MXC_IRQ_PRIOR
-void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
+#ifdef CONFIG_MXC_IRQ_PRIOR
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
- if (irq > 63)
- return;
+ if (irq >= MXC_INTERNAL_IRQS)
+ return -EINVAL;;
temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+
+ return 0;
+#else
+ return -ENOSYS;
+#endif
}
EXPORT_SYMBOL(imx_irq_set_priority);
-#endif
#ifdef CONFIG_FIQ
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
/* clock source */
-static cycle_t mxc_get_cycles(void)
+static cycle_t mxc_get_cycles(struct clocksource *cs)
{
return __raw_readl(TIMER_BASE + MXC_TCN);
}
}
}
+/**
+ * clk_init_one - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
void clk_init_one(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(void)
+static cycle_t omap_32k_read(struct clocksource *cs)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read();
+ ret = (unsigned long long)omap_32k_read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
{
unsigned long flags;
- spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
- dma_chan[lch].dev_id = -1;
- dma_chan[lch].next_lch = -1;
- dma_chan[lch].callback = NULL;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
}
EXPORT_SYMBOL(omap_free_dma);
{ .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 },
+ { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
};
static const char *omap3_dm_source_names[] __initdata = {
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
/*
- * Enable wake-up only for GPT1 on OMAP2 CPUs.
- * FIXME: All timers should have wake-up enabled and clear
- * PRCM status.
+ * Enable wake-up on OMAP2 CPUs.
*/
- if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
+ if (cpu_class_is_omap2())
l |= 1 << 2;
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
#ifdef CONFIG_ARCH_OMAP1
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;
u32 l;
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret = -EINVAL;
+
if (source < 0 || source >= 3)
- return;
+ return -EINVAL;
clk_disable(timer->fclk);
- clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
clk_enable(timer->fclk);
- /* When the functional clock disappears, too quick writes seem to
- * cause an abort. */
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
__delay(150000);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
config_invalid = 1;
return;
}
- if (rg.paddr)
+ if (rg.paddr) {
reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
- reserved += rg.size;
+ reserved += rg.size;
+ }
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 160)
+ if (cpu_is_omap34xx() && gpio < 192)
return 0;
return -1;
}
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
if (cpu_is_omap24xx() || cpu_is_omap34xx())
- __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
+ __raw_writel(gpio_mask, reg);
+
+ /* Flush posted write for the irq status to avoid spurious interrupts */
+ __raw_readl(reg);
#endif
}
case METHOD_MPUIO:
case METHOD_GPIO_1610:
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
return -EINVAL;
}
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK 0x100
-enum eac_mclk_src {
- EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
- EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
- EAC_MCLK_EXT_12288000,
- EAC_MCLK_EXT_2x11289600,
- EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
- EAC_CODEC_PCM,
- EAC_CODEC_AC97,
- EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
- EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
- /* if enabled, then first data slot (left channel) is signaled as
- * positive level of frame sync EAC.AC_FS */
- unsigned polarity_changed_mode:1;
- /* if enabled, then serial data starts one clock cycle after the
- * of EAC.AC_FS for first audio slot */
- unsigned sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
- enum eac_mclk_src mclk_src;
-
- enum eac_codec_mode codec_mode;
- union {
- struct eac_i2s_conf i2s;
- } codec_conf;
-
- int default_rate; /* audio sampling rate */
-
- int (* set_power)(void *private_data, int dac, int adc);
- int (* register_controls)(void *private_data,
- struct snd_card *card);
- const char *short_name;
-
- void *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
- int (* init)(struct device *eac_dev);
- void (* cleanup)(struct device *eac_dev);
- /* these callbacks are used to configure & control external MCLK
- * source. NULL if not used */
- int (* enable_ext_clocks)(struct device *eac_dev);
- void (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
- return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
int transceiver_cap;
int (*transceiver_mode)(struct device *dev, int mode);
int (*select_irda)(struct device *dev, int state);
- /* Very specific to the needs of some platforms (h3,h4)
- * having calls which can sleep in irda_set_speed.
- */
- struct delayed_work gpio_expa;
int rx_channel;
int tx_channel;
unsigned long dest_start;
/* use the internal clock */
unsigned internal_clock:1;
- s16 power_pin;
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
--- /dev/null
+/*
+ * OMAP2/3 GPTIMER support.headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+
+int __init omap2_gp_clockevent_set_gptimer(u8 id);
+
+#endif
+
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
/*
* Number of timer ticks per jiffy.
/*
* Clocksource handling.
*/
-static cycle_t orion_clksrc_read(void)
+static cycle_t orion_clksrc_read(struct clocksource *cs)
{
return 0xffffffff - readl(TIMER0_VAL);
}
return -ENOMEM;
}
+ memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
+
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
return 0;
}
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct pxa_gpio_chip *c;
else
c->irq_edge_fall &= ~mask;
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
struct pxa_gpio_chip *c = gpio_to_chip(gpio);
c->irq_mask |= GPIO_bit(gpio);
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
}
static struct irq_chip pxa_muxed_gpio_chip = {
int s3c24xx_register_clock(struct clk *clk)
{
- clk->owner = THIS_MODULE;
-
if (clk->enable == NULL)
clk->enable = clk_null_enable;
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/io.h>
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
{
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_setpull);
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
readl(adc->regs + S3C2410_ADCDLY));
}
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
void s3c_adc_release(struct s3c_adc_client *client)
{
/* We should really check that nothing is in progress. */
+ if (adc_dev->cur == client)
+ adc_dev->cur = NULL;
+ if (adc_dev->ts_pend == client)
+ adc_dev->ts_pend = NULL;
+ else {
+ struct list_head *p, *n;
+ struct s3c_adc_client *tmp;
+
+ list_for_each_safe(p, n, &adc_pending) {
+ tmp = list_entry(p, struct s3c_adc_client, pend);
+ if (tmp == client)
+ list_del(&tmp->pend);
+ }
+ }
+
+ if (adc_dev->cur == NULL)
+ s3c_adc_try(adc_dev);
kfree(client);
}
EXPORT_SYMBOL_GPL(s3c_adc_release);
EXPORT_SYMBOL(s3c2410_dma_getposition);
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
{
return container_of(dev, struct s3c2410_dma_chan, dev);
}
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#if 1
#define gpio_dbg(x...) do { } while(0)
#else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif
/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
-#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
+#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
+#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
+#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
+#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
+#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
+#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
+#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
+#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-palmt650 MACH_PALMT650 PALMT650 909
+treo650 MACH_TREO650 TREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
vpac270 MACH_VPAC270 VPAC270 1227
rd129 MACH_RD129 RD129 1228
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
-xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
+treo680 MACH_TREO680 TREO680 1230
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
-palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
-palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
-palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
-palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
+treo700p MACH_TREO700P TREO700P 1421
+treo700w MACH_TREO700W TREO700W 1422
+treo750 MACH_TREO750 TREO750 1423
+treo755p MACH_TREO755P TREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
csb637xo MACH_CSB637XO CSB637XO 1730
evisiong MACH_EVISIONG EVISIONG 1731
stmp37xx MACH_STMP37XX STMP37XX 1732
-stmp378x MACH_STMP38XX STMP38XX 1733
+stmp378x MACH_STMP378X STMP378X 1733
tnt MACH_TNT TNT 1734
tbxt MACH_TBXT TBXT 1735
playmate MACH_PLAYMATE PLAYMATE 1736
tavorevb MACH_TAVOREVB TAVOREVB 1827
saar MACH_SAAR SAAR 1828
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
-at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
+at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
adx_rmu MACH_ADX_RMU ADX_RMU 1833
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
spc300 MACH_SPC300 SPC300 2143
eko MACH_EKO EKO 2144
+ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
+ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
+m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
+str9104nas MACH_STAR9104NAS STAR9104NAS 2148
+pca100 MACH_PCA100 PCA100 2149
+z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
+hipox MACH_HIPOX HIPOX 2151
+omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
+bm150r MACH_BM150R BM150R 2153
+tbone MACH_TBONE TBONE 2154
+merlin MACH_MERLIN MERLIN 2155
+falcon MACH_FALCON FALCON 2156
+davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
+s5p6440 MACH_S5P6440 S5P6440 2158
+at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
+omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
+lpc313x MACH_LPC313X LPC313X 2161
+magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
+magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
+magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
+meesc MACH_MEESC MEESC 2165
+otc570 MACH_OTC570 OTC570 2166
+bcu2412 MACH_BCU2412 BCU2412 2167
+beacon MACH_BEACON BEACON 2168
+actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
+e4430 MACH_E4430 E4430 2170
+ql300 MACH_QL300 QL300 2171
+btmavb101 MACH_BTMAVB101 BTMAVB101 2172
+btmawb101 MACH_BTMAWB101 BTMAWB101 2173
+sq201 MACH_SQ201 SQ201 2174
+quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
+openpad MACH_OPENPAD OPENPAD 2176
+tx25 MACH_TX25 TX25 2177
+omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
+htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
+lal43 MACH_LAL43 LAL43 2181
+htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
+anw6410 MACH_ANW6410 ANW6410 2183
+htcprophet MACH_HTCPROPHET HTCPROPHET 2185
+cfa_10022 MACH_CFA_10022 CFA_10022 2186
+imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
+px2imx27 MACH_PX2IMX27 PX2IMX27 2188
+stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
+dvs10 MACH_DVS10 DVS10 2190
+portuxg20 MACH_PORTUXG20 PORTUXG20 2191
+arm_spv MACH_ARM_SPV ARM_SPV 2192
+smdkc110 MACH_SMDKC110 SMDKC110 2193
+cabespresso MACH_CABESPRESSO CABESPRESSO 2194
+hmc800 MACH_HMC800 HMC800 2195
+sholes MACH_SHOLES SHOLES 2196
+btmxc31 MACH_BTMXC31 BTMXC31 2197
+dt501 MACH_DT501 DT501 2198
+ktx MACH_KTX KTX 2199
+omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
+netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
+netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
+d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
+net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
+net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
+net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
+endb2443 MACH_ENDB2443 ENDB2443 2207
+inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
+tros MACH_TROS TROS 2209
+pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
+ofsp8 MACH_OFSP8 OFSP8 2211
+at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
+guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
+eab1r MACH_EAB1R EAB1R 2214
+desirec MACH_DESIREC DESIREC 2215
+cordoba MACH_CORDOBA CORDOBA 2216
+irvine MACH_IRVINE IRVINE 2217
+sff772 MACH_SFF772 SFF772 2218
+pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
+pc7302 MACH_PC7302 PC7302 2220
+bip6000 MACH_BIP6000 BIP6000 2221
+silvermoon MACH_SILVERMOON SILVERMOON 2222
+vc0830 MACH_VC0830 VC0830 2223
+dt430 MACH_DT430 DT430 2224
+ji42pf MACH_JI42PF JI42PF 2225
+gnet_ksm MACH_GNET_KSM GNET_KSM 2226
+gnet_sgm MACH_GNET_SGM GNET_SGM 2227
+gnet_sgr MACH_GNET_SGR GNET_SGR 2228
+omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
+pnp MACH_PNP PNP 2230
+ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
+ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
+sas_c MACH_SAS_C SAS_C 2233
+vma2315 MACH_VMA2315 VMA2315 2234
+vcs MACH_VCS VCS 2235
+spear600 MACH_SPEAR600 SPEAR600 2236
+spear300 MACH_SPEAR300 SPEAR300 2237
+spear1300 MACH_SPEAR1300 SPEAR1300 2238
+lilly1131 MACH_LILLY1131 LILLY1131 2239
+arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
+mapphone MACH_MAPPHONE MAPPHONE 2241
+legend MACH_LEGEND LEGEND 2242
+salsa MACH_SALSA SALSA 2243
+lounge MACH_LOUNGE LOUNGE 2244
+vision MACH_VISION VISION 2245
+vmb20 MACH_VMB20 VMB20 2246
+hy2410 MACH_HY2410 HY2410 2247
+hy9315 MACH_HY9315 HY9315 2248
+bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
+arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
+vs_v210 MACH_VS_V210 VS_V210 2252
+vs_v212 MACH_VS_V212 VS_V212 2253
+hmt MACH_HMT HMT 2254
+suen3 MACH_SUEN3 SUEN3 2255
+vesper MACH_VESPER VESPER 2256
+str9 MACH_STR9 STR9 2257
+omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
+simcom MACH_SIMCOM SIMCOM 2259
+mcwebio MACH_MCWEBIO MCWEBIO 2260
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/
-CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
-
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
.PHONY: $(BOOT_TARGETS) install
#include <mach/pm.h>
-static cycle_t read_cycle_count(void)
+static cycle_t read_cycle_count(struct clocksource *cs)
{
return (cycle_t)sysreg_read(COUNT);
}
#include <asm/unaligned.h>
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
+#define __NR_preadv 366
+#define __NR_pwritev 367
-#define __NR_syscall 366
+#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
--- /dev/null
+vmlinux.lds
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
}
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
{
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
-unsigned long long sched_clock(void)
-{
- return cycles_2_ns(read_cycles());
-}
-
static struct clocksource clocksource_bfin = {
.name = "bfin_cycles",
.rating = 350,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+unsigned long long sched_clock(void)
+{
+ return cycles_2_ns(read_cycles(&clocksource_bfin));
+}
+
static int __init bfin_clocksource_init(void)
{
set_cyc2ns_scale(get_cclk() / 1000);
#define strncmp __inline_strncmp
#include <asm/string.h>
-#undef strncmp
-
#include <linux/module.h>
+#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
+ .long _sys_preadv
+ .long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
# cris object files path
OBJ_ARCH = $(objtree)/arch/cris
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
MACHINE := arch/cris/$(SARCH)
all: zImage
archprepare:
archclean:
- $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
- $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+ $(Q)if [ -e arch/cris/boot ]; then \
+ $(MAKE) $(clean)=arch/cris/boot; \
fi
CLEAN_FILES += \
- $(MACHINE)/boot/zImage \
- $(MACHINE)/boot/compressed/decompress.bin \
- $(MACHINE)/boot/compressed/piggy.gz \
- $(MACHINE)/boot/rescue/rescue.bin
+ $(boot)/zImage \
+ $(boot)/compressed/decompress.bin \
+ $(boot)/compressed/piggy.gz \
+ $(boot)/rescue/rescue.bin
# MRPROPER_FILES +=
+++ /dev/null
-Image
-zImage
+++ /dev/null
-#
-# arch/cris/arch-v10/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
- @echo ' Kernel: $@ is ready'
+++ /dev/null
-#
-# arch/cris/arch-v10/boot/compressed/Makefile
-#
-
-asflags-y += $(LINUXINCLUDE)
-ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
-
+++ /dev/null
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
+++ /dev/null
-/* OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_FORMAT(elf32-cris)
-
-MEMORY
- {
- dram : ORIGIN = 0x40700000,
- LENGTH = 0x00100000
- }
-
-SECTIONS
-{
- .text :
- {
- _stext = . ;
- *(.text)
- *(.rodata)
- *(.rodata.*)
- _etext = . ;
- } > dram
- .data :
- {
- *(.data)
- _edata = . ;
- } > dram
- .bss :
- {
- *(.bss)
- _end = ALIGN( 0x10 ) ;
- } > dram
-}
+++ /dev/null
-/*
- * arch/cris/boot/compressed/head.S
- *
- * Copyright (C) 1999, 2001 Axis Communications AB
- *
- * Code that sets up the DRAM registers, calls the
- * decompressor to unpack the piggybacked kernel, and jumps.
- *
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
- ;; Exported symbols
-
- .globl input_data
-
-
- .text
-
- nop
- di
-
-;; We need to initialze DRAM registers before we start using the DRAM
-
- cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
- beq dram_init_finished
- nop
-
-#include "../../lib/dram_init.S"
-
-dram_init_finished:
-
- ;; Initiate the PA and PB ports
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
- move.b $r0, [R_PORT_PA_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
- move.b $r0, [R_PORT_PA_DIR]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
- move.b $r0, [R_PORT_PB_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
- move.b $r0, [R_PORT_PB_DIR]
-
- ;; Setup the stack to a suitably high address.
- ;; We assume 8 MB is the minimum DRAM in an eLinux
- ;; product and put the sp at the top for now.
-
- move.d 0x40800000, $sp
-
- ;; Figure out where the compressed piggyback image is
- ;; in the flash (since we wont try to copy it to DRAM
- ;; before unpacking). It is at _edata, but in flash.
- ;; Use (_edata - basse) as offset to the current PC.
-
-basse: move.d $pc, $r5
- and.d 0x7fffffff, $r5 ; strip any non-cache bit
- subq 2, $r5 ; compensate for the move.d $pc instr
- move.d $r5, $r0 ; save for later - flash address of 'basse'
- add.d _edata, $r5
- sub.d basse, $r5 ; $r5 = flash address of '_edata'
-
- ;; Copy text+data to DRAM
-
- move.d basse, $r1 ; destination
- move.d _edata, $r2 ; end destination
-1: move.w [$r0+], $r3
- move.w $r3, [$r1+]
- cmp.d $r2, $r1
- bcs 1b
- nop
-
- move.d $r5, [input_data] ; for the decompressor
-
-
- ;; Clear the decompressors BSS (between _edata and _end)
-
- moveq 0, $r0
- move.d _edata, $r1
- move.d _end, $r2
-1: move.w $r0, [$r1+]
- cmp.d $r2, $r1
- bcs 1b
- nop
-
- ;; Save command line magic and address.
- move.d _cmd_line_magic, $r12
- move.d $r10, [$r12]
- move.d _cmd_line_addr, $r12
- move.d $r11, [$r12]
-
- ;; Do the decompression and save compressed size in inptr
-
- jsr decompress_kernel
-
- ;; Put start address of root partition in $r9 so the kernel can use it
- ;; when mounting from flash
-
- move.d [input_data], $r9 ; flash address of compressed kernel
- add.d [inptr], $r9 ; size of compressed kernel
-
- ;; Restore command line magic and address.
- move.d _cmd_line_magic, $r10
- move.d [$r10], $r10
- move.d _cmd_line_addr, $r11
- move.d [$r11], $r11
-
- ;; Enter the decompressed kernel
- move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
- jump 0x40004000 ; kernel is linked to this address
-
- .data
-
-input_data:
- .dword 0 ; used by the decompressor
-_cmd_line_magic:
- .dword 0
-_cmd_line_addr:
- .dword 0
-#include "../../lib/hw_settings.S"
+++ /dev/null
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n) memset((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-unsigned inptr = 0; /* index of next byte to be processed in inbuf
- * After decompression it will contain the
- * compressed size, and head.S will read it.
- */
-
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond, msg) do { \
- if (!(cond)) \
- error(msg); \
- } while (0)
-# define Trace(x) fprintf x
-# define Tracev(x) do { \
- if (verbose) \
- fprintf x; \
- } while (0)
-# define Tracevv(x) do { \
- if (verbose > 1) \
- fprintf x; \
- } while (0)
-# define Tracec(c, x) do { \
- if (verbose && (c)) \
- fprintf x; \
- } while (0)
-# define Tracecv(c, x) do { \
- if (verbose > 1 && (c)) \
- fprintf x; \
- } while (0)
-#else
-# define Assert(cond, msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c, x)
-# define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data; /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
- *R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
- *R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
- *R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
- *R_SERIAL3_TR_DATA = *s++;
-#endif
- }
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
- int i;
- char *ss = (char *)s;
-
- for (i = 0; i < n; i++)
- ss[i] = c;
-
- return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i = 0; i < __n; i++)
- d[i] = s[i];
-
- return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out = *in;
- out++;
- in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted\n");
-
- while (1); /* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
- output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
- char revision;
-
- /* input_data is set in head.S */
- inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- *R_SERIAL0_XOFF = 0;
- *R_SERIAL0_BAUD = 0x99;
- *R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- *R_SERIAL1_XOFF = 0;
- *R_SERIAL1_BAUD = 0x99;
- *R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- *R_GEN_CONFIG = 0x08;
- *R_SERIAL2_XOFF = 0;
- *R_SERIAL2_BAUD = 0x99;
- *R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- *R_GEN_CONFIG = 0x100;
- *R_SERIAL3_XOFF = 0;
- *R_SERIAL3_BAUD = 0x99;
- *R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
- setup_normal_output_buffer();
-
- makecrc();
-
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 10) {
- puts("You need an ETRAX 100LX to run linux 2.6\n");
- while (1);
- }
-
- puts("Uncompressing Linux...\n");
- gunzip();
- puts("Done. Now booting the kernel.\n");
-}
+++ /dev/null
-#
-# Makefile for rescue (bootstrap) code
-#
-
-ccflags-y += -O2 $(LINUXINCLUDE)
-asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-$(obj)/rescue.o: $(OBJECT) FORCE
- $(call if_changed,ld)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
- $(call if_changed,objcopy)
- cp -p $(obj)/rescue.bin $(objtree)
-
-$(obj)/testrescue.bin: $(obj)/testrescue.o
- $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
-# Pad it to 784 bytes
- dd if=/dev/zero of=tmp2423 bs=1 count=784
- cat tr.bin tmp2423 >testrescue_tmp.bin
- dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
- rm tr.bin tmp2423 testrescue_tmp.bin
-
-$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
- $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
-# Pad it to 784 bytes, that's what the rescue loader expects
- dd if=/dev/zero of=tmp2423 bs=1 count=784
- cat ktr.bin tmp2423 >kimagerescue_tmp.bin
- dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
- rm ktr.bin tmp2423 kimagerescue_tmp.bin
+++ /dev/null
-/*
- * Rescue code, made to reside at the beginning of the
- * flash-memory. when it starts, it checks a partition
- * table at the first sector after the rescue sector.
- * the partition table was generated by the product builder
- * script and contains offsets, lengths, types and checksums
- * for each partition that this code should check.
- *
- * If any of the checksums fail, we assume the flash is so
- * corrupt that we cant use it to boot into the ftp flash
- * loader, and instead we initialize the serial port to
- * receive a flash-loader and new flash image. we dont include
- * any flash code here, but just accept a certain amount of
- * bytes from the serial port and jump into it. the downloaded
- * code is put in the cache.
- *
- * The partitiontable is designed so that it is transparent to
- * code execution - it has a relative branch opcode in the
- * beginning that jumps over it. each entry contains extra
- * data so we can add stuff later.
- *
- * Partition table format:
- *
- * Code transparency:
- *
- * 2 bytes [opcode 'nop']
- * 2 bytes [opcode 'di']
- * 4 bytes [opcode 'ba <offset>', 8-bit or 16-bit version]
- * 2 bytes [opcode 'nop', delay slot]
- *
- * Table validation (at +10):
- *
- * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe]
- * 2 bytes [length of all entries plus the end marker]
- * 4 bytes [checksum for the partitiontable itself]
- *
- * Entries, each with the following format, last has offset -1:
- *
- * 4 bytes [offset in bytes, from start of flash]
- * 4 bytes [length in bytes of partition]
- * 4 bytes [checksum, simple longword sum]
- * 2 bytes [partition type]
- * 2 bytes [flags, only bit 0 used, ro/rw = 1/0]
- * 16 bytes [reserved for future use]
- *
- * End marker
- *
- * 4 bytes [-1]
- *
- * 10 bytes [0, padding]
- *
- * Bit 0 in flags signifies RW or RO. The rescue code only bothers
- * to check the checksum for RO partitions, since the others will
- * change their data without updating the checksums. A 1 in bit 0
- * means RO, 0 means RW. That way, it is possible to set a partition
- * in RO mode initially, and later mark it as RW, since you can always
- * write 0's to the flash.
- *
- * During the wait for serial input, the status LED will flash so the
- * user knows something went wrong.
- *
- * Copyright (C) 1999-2007 Axis Communications AB
- */
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
- ;; The partitiontable is looked for at the first sector after the boot
- ;; sector. Sector size is 65536 bytes in all flashes we use.
-
-#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
-#define PTABLE_MAGIC 0xbeef
-
- ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
- ;; That is not where we put our downloaded serial boot-code.
- ;; The length is enough for downloading code that loads the rest
- ;; of itself (after having setup the DRAM etc).
- ;; It is the same length as the on-chip ROM loads, so the same
- ;; host loader can be used to load a rescued product as well as
- ;; one booted through the Etrax serial boot code.
-
-#define CODE_START 0x40000000
-#define CODE_LENGTH 784
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
-#define NOP_DI 0xf025050f
-#define RAM_INIT_MAGIC 0x56902387
-
- .text
-
- ;; This is the entry point of the rescue code
- ;; 0x80000000 if loaded in flash (as it should be)
- ;; Since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
- nop
- di
-
- jump in_cache ; enter cached area instead
-in_cache:
-
-
- ;; First put a jump test to give a possibility of upgrading the
- ;; rescue code without erasing/reflashing the sector.
- ;; We put a longword of -1 here and if it is not -1, we jump using
- ;; the value as jump target. Since we can always change 1's to 0's
- ;; without erasing the sector, it is possible to add new
- ;; code after this and altering the jumptarget in an upgrade.
-
-jtcd: move.d [jumptarget], $r0
- cmp.d 0xffffffff, $r0
- beq no_newjump
- nop
-
- jump [$r0]
-
-jumptarget:
- .dword 0xffffffff ; can be overwritten later to insert new code
-
-no_newjump:
-#ifdef CONFIG_ETRAX_ETHERNET
- ;; Start MII clock to make sure it is running when tranceiver is reset
- move.d 0x3, $r0 ; enable = on, phy = mii_clk
- move.d $r0, [R_NETWORK_GEN_CONFIG]
-#endif
-
- ;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
- ;; we now should go through the checksum-table and check the listed
- ;; partitions for errors.
-
- move.d PTABLE_START, $r3
- move.d [$r3], $r0
- cmp.d NOP_DI, $r0 ; make sure the nop/di is there...
- bne do_rescue
- nop
-
- ;; skip the code transparency block (10 bytes).
-
- addq 10, $r3
-
- ;; check for correct magic
-
- move.w [$r3+], $r0
- cmp.w PTABLE_MAGIC, $r0
- bne do_rescue ; didn't recognize - trig rescue
- nop
-
- ;; check for correct ptable checksum
-
- movu.w [$r3+], $r2 ; ptable length
- move.d $r2, $r8 ; save for later, length of total ptable
- addq 28, $r8 ; account for the rest
- move.d [$r3+], $r4 ; ptable checksum
- move.d $r3, $r1
- jsr checksum ; r1 source, r2 length, returns in r0
-
- cmp.d $r0, $r4
- bne do_rescue ; didn't match - trig rescue
- nop
-
- ;; ptable is ok. validate each entry.
-
- moveq -1, $r7
-
-ploop: move.d [$r3+], $r1 ; partition offset (from ptable start)
- bne notfirst ; check if it is the partition containing ptable
- nop ; yes..
- move.d $r8, $r1 ; for its checksum check, skip the ptable
- move.d [$r3+], $r2 ; partition length
- sub.d $r8, $r2 ; minus the ptable length
- ba bosse
- nop
-notfirst:
- cmp.d -1, $r1 ; the end of the ptable ?
- beq flash_ok ; if so, the flash is validated
- move.d [$r3+], $r2 ; partition length
-bosse: move.d [$r3+], $r5 ; checksum
- move.d [$r3+], $r4 ; type and flags
- addq 16, $r3 ; skip the reserved bytes
- btstq 16, $r4 ; check ro flag
- bpl ploop ; rw partition, skip validation
- nop
- btstq 17, $r4 ; check bootable flag
- bpl 1f
- nop
- move.d $r1, $r7 ; remember boot partition offset
-1:
- add.d PTABLE_START, $r1
-
- jsr checksum ; checksum the partition
-
- cmp.d $r0, $r5
- beq ploop ; checksums matched, go to next entry
- nop
-
- ;; otherwise fall through to the rescue code.
-
-do_rescue:
- ;; setup port PA and PB default initial directions and data
- ;; (so we can flash LEDs, and so that DTR and others are set)
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
- move.b $r0, [R_PORT_PA_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
- move.b $r0, [R_PORT_PA_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
- move.b $r0, [R_PORT_PB_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
- move.b $r0, [R_PORT_PB_DATA]
-
- ;; setup the serial port at 115200 baud
-
- moveq 0, $r0
- move.d $r0, [SERXOFF]
-
- move.b 0x99, $r0
- move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
-
- move.b 0x40, $r0 ; rec enable
- move.b $r0, [SERRECC]
-
- moveq 0, $r1 ; "timer" to clock out a LED red flash
- move.d CODE_START, $r3 ; destination counter
- movu.w CODE_LENGTH, $r4; length
-
-wait_ser:
- addq 1, $r1
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
- move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
- btstq 16, $r1
- bpl 1f
- nop
- or.d $r0, $r2 ; set bit
- ba 2f
- nop
-1: not $r0 ; clear bit
- and.d $r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b $r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b $r2, [R_PORT_PB_DATA]
-#endif
-#ifdef CONFIG_ETRAX_90000000_LEDS
- move.b $r2, [0x90000000]
-#endif
-#endif
-
- ;; check if we got something on the serial port
-
- move.b [SERSTAT], $r0
- btstq 0, $r0 ; data_avail
- bpl wait_ser
- nop
-
- ;; got something - copy the byte and loop
-
- move.b [SERRDAT], $r0
- move.b $r0, [$r3+]
-
- subq 1, $r4 ; decrease length
- bne wait_ser
- nop
-
- ;; jump into downloaded code
-
- move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is
- ; initialized
- jump CODE_START
-
-flash_ok:
- ;; check r7, which contains either -1 or the partition to boot from
-
- cmp.d -1, $r7
- bne 1f
- nop
- move.d PTABLE_START, $r7; otherwise use the ptable start
-1:
- move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is
- ; initialized
- jump $r7 ; boot!
-
-
- ;; Helper subroutines
-
- ;; Will checksum by simple addition
- ;; r1 - source
- ;; r2 - length in bytes
- ;; result will be in r0
-checksum:
- moveq 0, $r0
- moveq CONFIG_ETRAX_FLASH1_SIZE, $r6
-
- ;; If the first physical flash memory is exceeded wrap to the
- ;; second one
- btstq 26, $r1 ; Are we addressing first flash?
- bpl 1f
- nop
- clear.d $r6
-
-1: test.d $r6 ; 0 = no wrapping
- beq 2f
- nop
- lslq 20, $r6 ; Convert MB to bytes
- sub.d $r1, $r6
-
-2: addu.b [$r1+], $r0
- subq 1, $r6 ; Flash memory left
- beq 3f
- subq 1, $r2 ; Length left
- bne 2b
- nop
- ret
- nop
-
-3: move.d MEM_CSE1_START, $r1 ; wrap to second flash
- ba 2b
- nop
-
-#endif
+++ /dev/null
-/*
- * Rescue code to be prepended on a kimage and copied to the
- * rescue serial port.
- * This is called from the rescue code, it will copy received data to
- * 4004000 and after a timeout jump to it.
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
-#define CODE_START 0x40004000
-#define CODE_LENGTH 784
-#define TIMEOUT_VALUE 1000
-
-
-#ifdef CONFIG_ETRAX_RESCUE_SER0
-#define SERXOFF R_SERIAL0_XOFF
-#define SERBAUD R_SERIAL0_BAUD
-#define SERRECC R_SERIAL0_REC_CTRL
-#define SERRDAT R_SERIAL0_REC_DATA
-#define SERSTAT R_SERIAL0_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER1
-#define SERXOFF R_SERIAL1_XOFF
-#define SERBAUD R_SERIAL1_BAUD
-#define SERRECC R_SERIAL1_REC_CTRL
-#define SERRDAT R_SERIAL1_REC_DATA
-#define SERSTAT R_SERIAL1_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER2
-#define SERXOFF R_SERIAL2_XOFF
-#define SERBAUD R_SERIAL2_BAUD
-#define SERRECC R_SERIAL2_REC_CTRL
-#define SERRDAT R_SERIAL2_REC_DATA
-#define SERSTAT R_SERIAL2_STATUS
-#endif
-#ifdef CONFIG_ETRAX_RESCUE_SER3
-#define SERXOFF R_SERIAL3_XOFF
-#define SERBAUD R_SERIAL3_BAUD
-#define SERRECC R_SERIAL3_REC_CTRL
-#define SERRDAT R_SERIAL3_REC_DATA
-#define SERSTAT R_SERIAL3_STATUS
-#endif
-
- .text
- ;; This is the entry point of the rescue code
- ;; 0x80000000 if loaded in flash (as it should be)
- ;; since etrax actually starts at address 2 when booting from flash, we
- ;; put a nop (2 bytes) here first so we dont accidentally skip the di
-
- nop
- di
-#ifndef CONFIG_SVINTO_SIM
- ;; setup port PA and PB default initial directions and data
- ;; (so we can flash LEDs, and so that DTR and others are set)
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
- move.b $r0, [R_PORT_PA_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
- move.b $r0, [R_PORT_PA_DATA]
-
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
- move.b $r0, [R_PORT_PB_DIR]
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
- move.b $r0, [R_PORT_PB_DATA]
-
- ;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
-
-#endif
- ;; Setup the stack to a suitably high address.
- ;; We assume 8 MB is the minimum DRAM in an eLinux
- ;; product and put the sp at the top for now.
-
- move.d 0x40800000, $sp
-
- ;; setup the serial port at 115200 baud
-
- moveq 0, $r0
- move.d $r0, [SERXOFF]
-
- move.b 0x99, $r0
- move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit
- ; and receive
-
- move.b 0x40, $r0 ; rec enable
- move.b $r0, [SERRECC]
-
-
- moveq 0, $r1 ; "timer" to clock out a LED red flash
- move.d CODE_START, $r3 ; destination counter
- move.d CODE_LENGTH, $r4 ; length
- move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump
-
-wait_ser:
- addq 1, $r1
- subq 1, $r5 ; decrease timeout
- beq jump_start ; timed out
- nop
-#ifndef CONFIG_ETRAX_NO_LEDS
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
-#endif
- move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
- btstq 16, $r1
- bpl 1f
- nop
- or.d $r0, $r2 ; set bit
- ba 2f
- nop
-1: not $r0 ; clear bit
- and.d $r0, $r2
-2:
-#ifdef CONFIG_ETRAX_PA_LEDS
- move.b $r2, [R_PORT_PA_DATA]
-#endif
-#ifdef CONFIG_ETRAX_PB_LEDS
- move.b $r2, [R_PORT_PB_DATA]
-#endif
-#endif
-
- ;; check if we got something on the serial port
-
- move.b [SERSTAT], $r0
- btstq 0, $r0 ; data_avail
- bpl wait_ser
- nop
-
- ;; got something - copy the byte and loop
-
- move.b [SERRDAT], $r0
- move.b $r0, [$r3+]
- move.d TIMEOUT_VALUE, $r5 ; reset "timeout"
- subq 1, $r4 ; decrease length
- bne wait_ser
- nop
-jump_start:
- ;; jump into downloaded code
-
- jump CODE_START
+++ /dev/null
-MEMORY
- {
- flash : ORIGIN = 0x00000000,
- LENGTH = 0x00100000
- }
-
-SECTIONS
-{
- .text :
- {
- stext = . ;
- *(.text)
- etext = . ;
- } > flash
- .data :
- {
- *(.data)
- edata = . ;
- } > flash
-}
+++ /dev/null
-/*
- * Simple testcode to download by the rescue block.
- * Just lights some LEDs to show it was downloaded correctly.
- *
- * Copyright (C) 1999 Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <arch/sv_addr_ag.h>
-
- .text
-
- nop
- nop
- moveq -1, $r2
- move.b $r2, [R_PORT_PA_DIR]
- moveq 0, $r2
- move.b $r2, [R_PORT_PA_DATA]
-
-endless:
- nop
- ba endless
- nop
-
+++ /dev/null
-/*
- * linux/tools/build.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/*
- * This file builds a disk-image from three different files:
- *
- * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
- * - setup: 8086 machine code, sets up system parm
- * - system: 80386 code for actual system
- *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
- */
-
-/*
- * Changes by tytso to allow root device specification
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- * Cross compiling fixes by Gertjan van Wingerde, July 1996
- */
-
-#include <stdio.h> /* fprintf */
-#include <string.h>
-#include <stdlib.h> /* contains exit */
-#include <sys/types.h> /* unistd.h needs this */
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <unistd.h> /* contains read/write */
-#include <fcntl.h>
-#include <errno.h>
-
-#define MINIX_HEADER 32
-
-#define N_MAGIC_OFFSET 1024
-#ifndef __BFD__
-static int GCC_HEADER = sizeof(struct exec);
-#endif
-
-#ifdef __BIG_KERNEL__
-#define SYS_SIZE 0xffff
-#else
-#define SYS_SIZE DEF_SYSSIZE
-#endif
-
-#define DEFAULT_MAJOR_ROOT 0
-#define DEFAULT_MINOR_ROOT 0
-
-/* max nr of sectors of setup: don't change unless you also change
- * bootsect etc */
-#define SETUP_SECTS 4
-
-#define STRINGIFY(x) #x
-
-typedef union {
- int i;
- long l;
- short s[2];
- char b[4];
-} conv;
-
-long intel_long(long l)
-{
- conv t;
-
- t.b[0] = l & 0xff; l >>= 8;
- t.b[1] = l & 0xff; l >>= 8;
- t.b[2] = l & 0xff; l >>= 8;
- t.b[3] = l & 0xff; l >>= 8;
- return t.l;
-}
-
-int intel_int(int i)
-{
- conv t;
-
- t.b[0] = i & 0xff; i >>= 8;
- t.b[1] = i & 0xff; i >>= 8;
- t.b[2] = i & 0xff; i >>= 8;
- t.b[3] = i & 0xff; i >>= 8;
- return t.i;
-}
-
-short intel_short(short l)
-{
- conv t;
-
- t.b[0] = l & 0xff; l >>= 8;
- t.b[1] = l & 0xff; l >>= 8;
- return t.s[0];
-}
-
-void die(const char * str)
-{
- fprintf(stderr,"%s\n",str);
- exit(1);
-}
-
-void usage(void)
-{
- die("Usage: build bootsect setup system [rootdev] [> image]");
-}
-
-int main(int argc, char ** argv)
-{
- int i,c,id,sz,tmp_int;
- unsigned long sys_size, tmp_long;
- char buf[1024];
-#ifndef __BFD__
- struct exec *ex = (struct exec *)buf;
-#endif
- char major_root, minor_root;
- struct stat sb;
- unsigned char setup_sectors;
-
- if ((argc < 4) || (argc > 5))
- usage();
- if (argc > 4) {
- if (!strcmp(argv[4], "CURRENT")) {
- if (stat("/", &sb)) {
- perror("/");
- die("Couldn't stat /");
- }
- major_root = major(sb.st_dev);
- minor_root = minor(sb.st_dev);
- } else if (strcmp(argv[4], "FLOPPY")) {
- if (stat(argv[4], &sb)) {
- perror(argv[4]);
- die("Couldn't stat root device.");
- }
- major_root = major(sb.st_rdev);
- minor_root = minor(sb.st_rdev);
- } else {
- major_root = 0;
- minor_root = 0;
- }
- } else {
- major_root = DEFAULT_MAJOR_ROOT;
- minor_root = DEFAULT_MINOR_ROOT;
- }
- fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
- for (i=0;i<sizeof buf; i++) buf[i]=0;
- if ((id=open(argv[1],O_RDONLY,0))<0)
- die("Unable to open 'boot'");
- if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
- die("Unable to read header of 'boot'");
- if (((long *) buf)[0]!=intel_long(0x04100301))
- die("Non-Minix header of 'boot'");
- if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
- die("Non-Minix header of 'boot'");
- if (((long *) buf)[3] != 0)
- die("Illegal data segment in 'boot'");
- if (((long *) buf)[4] != 0)
- die("Illegal bss in 'boot'");
- if (((long *) buf)[5] != 0)
- die("Non-Minix header of 'boot'");
- if (((long *) buf)[7] != 0)
- die("Illegal symbol table in 'boot'");
- i=read(id,buf,sizeof buf);
- fprintf(stderr,"Boot sector %d bytes.\n",i);
- if (i != 512)
- die("Boot block must be exactly 512 bytes");
- if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
- die("Boot block hasn't got boot flag (0xAA55)");
- buf[508] = (char) minor_root;
- buf[509] = (char) major_root;
- i=write(1,buf,512);
- if (i!=512)
- die("Write call failed");
- close (id);
-
- if ((id=open(argv[2],O_RDONLY,0))<0)
- die("Unable to open 'setup'");
- if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
- die("Unable to read header of 'setup'");
- if (((long *) buf)[0]!=intel_long(0x04100301))
- die("Non-Minix header of 'setup'");
- if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
- die("Non-Minix header of 'setup'");
- if (((long *) buf)[3] != 0)
- die("Illegal data segment in 'setup'");
- if (((long *) buf)[4] != 0)
- die("Illegal bss in 'setup'");
- if (((long *) buf)[5] != 0)
- die("Non-Minix header of 'setup'");
- if (((long *) buf)[7] != 0)
- die("Illegal symbol table in 'setup'");
- for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
-#ifdef __BIG_KERNEL__
- {
- if (!i) {
- /* Working with memcpy because of alignment constraints
- on Sparc - Gertjan */
- memcpy(&tmp_long, &buf[2], sizeof(long));
- if (tmp_long != intel_long(0x53726448) )
- die("Wrong magic in loader header of 'setup'");
- memcpy(&tmp_int, &buf[6], sizeof(int));
- if (tmp_int < intel_int(0x200))
- die("Wrong version of loader header of 'setup'");
- buf[0x11] = 1; /* LOADED_HIGH */
- tmp_long = intel_long(0x100000);
- memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */
- }
-#endif
- if (write(1,buf,c)!=c)
- die("Write call failed");
-#ifdef __BIG_KERNEL__
- }
-#endif
- if (c != 0)
- die("read-error on 'setup'");
- close (id);
- setup_sectors = (unsigned char)((i + 511) / 512);
- /* for compatibility with LILO */
- if (setup_sectors < SETUP_SECTS)
- setup_sectors = SETUP_SECTS;
- fprintf(stderr,"Setup is %d bytes.\n",i);
- for (c=0 ; c<sizeof(buf) ; c++)
- buf[c] = '\0';
- while (i < setup_sectors * 512) {
- c = setup_sectors * 512 - i;
- if (c > sizeof(buf))
- c = sizeof(buf);
- if (write(1,buf,c) != c)
- die("Write call failed");
- i += c;
- }
-
- if ((id=open(argv[3],O_RDONLY,0))<0)
- die("Unable to open 'system'");
-#ifndef __BFD__
- if (read(id,buf,GCC_HEADER) != GCC_HEADER)
- die("Unable to read header of 'system'");
- if (N_MAGIC(*ex) == ZMAGIC) {
- GCC_HEADER = N_MAGIC_OFFSET;
- lseek(id, GCC_HEADER, SEEK_SET);
- } else if (N_MAGIC(*ex) != QMAGIC)
- die("Non-GCC header of 'system'");
- fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
- (ex->a_text+ex->a_data+ex->a_bss)/1024,
- ex->a_text /1024,
- ex->a_data /1024,
- ex->a_bss /1024);
- sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
-#else
- if (fstat (id, &sb)) {
- perror ("fstat");
- die ("Unable to stat 'system'");
- }
- sz = sb.st_size;
- fprintf (stderr, "System is %d kB\n", sz/1024);
-#endif
- sys_size = (sz + 15) / 16;
- if (sys_size > SYS_SIZE)
- die("System is too big");
- while (sz > 0) {
- int l, n;
-
- l = sz;
- if (l > sizeof(buf))
- l = sizeof(buf);
- if ((n=read(id, buf, l)) != l) {
- if (n == -1)
- perror(argv[1]);
- else
- fprintf(stderr, "Unexpected EOF\n");
- die("Can't read 'system'");
- }
- if (write(1, buf, l) != l)
- die("Write failed");
- sz -= l;
- }
- close(id);
- if (lseek(1, 497, 0) == 497) {
- if (write(1, &setup_sectors, 1) != 1)
- die("Write of setup sectors failed");
- }
- if (lseek(1,500,0) == 500) {
- buf[0] = (sys_size & 0xff);
- buf[1] = ((sys_size >> 8) & 0xff);
- if (write(1, buf, 2) != 2)
- die("Write failed");
- }
- return(0);
-}
movem $r13, [$sp]
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
-
+
move.d $sp, $r10
jsr do_multiple_IRQ
-
+
jump ret_from_intr
do_sigtrap:
pop $r0 ; Restore r0.
ba do_sigtrap ; SIGTRAP the offending process.
pop $dccr ; Restore dccr in delay slot.
-
+
.global kernel_execve
kernel_execve:
move.d __NR_execve, $r9
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
+++ /dev/null
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
- @echo ' Kernel: $@ is ready'
+++ /dev/null
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
+++ /dev/null
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
+++ /dev/null
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-
-MEMORY
- {
- dram : ORIGIN = 0x40700000,
- LENGTH = 0x00100000
- }
-
-SECTIONS
-{
- .text :
- {
- _stext = . ;
- *(.text)
- *(.rodata)
- *(.rodata.*)
- _etext = . ;
- } > dram
- .data :
- {
- *(.data)
- _edata = . ;
- } > dram
- .bss :
- {
- *(.bss)
- _end = ALIGN( 0x10 ) ;
- } > dram
-}
+++ /dev/null
-/*
- * Code that sets up the DRAM registers, calls the
- * decompressor to unpack the piggybacked kernel, and jumps.
- *
- * Copyright (C) 1999 - 2006, Axis Communications AB
- */
-
-#define ASSEMBLER_MACROS_ONLY
-#include <hwregs/asm/reg_map_asm.h>
-#include <mach/startup.inc>
-
-#define RAM_INIT_MAGIC 0x56902387
-#define COMMAND_LINE_MAGIC 0x87109563
-
- ;; Exported symbols
-
- .globl input_data
-
- .text
-_start:
- di
-
- ;; Start clocks for used blocks.
- START_CLOCKS
-
- ;; Initialize the DRAM registers.
- cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
- beq dram_init_finished
- nop
-
-#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
-#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
-#else
-#error Only ETRAXFS and ARTPEC-3 supported!
-#endif
-
-dram_init_finished:
-
- GIO_INIT
- ;; Setup the stack to a suitably high address.
- ;; We assume 8 MB is the minimum DRAM and put
- ;; the SP at the top for now.
-
- move.d 0x40800000, $sp
-
- ;; Figure out where the compressed piggyback image is.
- ;; It is either in [NOR] flash (we don't want to copy it
- ;; to DRAM before unpacking), or copied to DRAM
- ;; by the [NAND] flash boot loader.
- ;; The piggyback image is at _edata, but relative to where the
- ;; image is actually located in memory, not where it is linked
- ;; (the decompressor is linked at 0x40700000+ and runs there).
- ;; Use (_edata - herami) as offset to the current PC.
-
-hereami:
- lapcq ., $r5 ; get PC
- and.d 0x7fffffff, $r5 ; strip any non-cache bit
- move.d $r5, $r0 ; source address of 'herami'
- add.d _edata, $r5
- sub.d hereami, $r5 ; r5 = flash address of '_edata'
- move.d hereami, $r1 ; destination
-
- ;; Copy text+data to DRAM
-
- move.d _edata, $r2 ; end destination
-1: move.w [$r0+], $r3 ; from herami+ source
- move.w $r3, [$r1+] ; to hereami+ destination (linked address)
- cmp.d $r2, $r1 ; finish when destination == _edata
- bcs 1b
- nop
- move.d input_data, $r0 ; for the decompressor
- move.d $r5, [$r0] ; for the decompressor
-
- ;; Clear the decompressors BSS (between _edata and _end)
-
- moveq 0, $r0
- move.d _edata, $r1
- move.d _end, $r2
-1: move.w $r0, [$r1+]
- cmp.d $r2, $r1
- bcs 1b
- nop
-
- ;; Save command line magic and address.
- move.d _cmd_line_magic, $r0
- move.d $r10, [$r0]
- move.d _cmd_line_addr, $r0
- move.d $r11, [$r0]
-
- ;; Save boot source indicator
- move.d _boot_source, $r0
- move.d $r12, [$r0]
-
- ;; Do the decompression and save compressed size in _inptr
-
- jsr decompress_kernel
- nop
-
- ;; Restore boot source indicator
- move.d _boot_source, $r12
- move.d [$r12], $r12
-
- ;; Restore command line magic and address.
- move.d _cmd_line_magic, $r10
- move.d [$r10], $r10
- move.d _cmd_line_addr, $r11
- move.d [$r11], $r11
-
- ;; Put start address of root partition in r9 so the kernel can use it
- ;; when mounting from flash
- move.d input_data, $r0
- move.d [$r0], $r9 ; flash address of compressed kernel
- move.d inptr, $r0
- add.d [$r0], $r9 ; size of compressed kernel
- cmp.d 0x40000000, $r9 ; image in DRAM ?
- blo enter_kernel ; no, must be [NOR] flash, jump
- nop ; delay slot
- and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M
-
-enter_kernel:
- ;; Enter the decompressed kernel
- move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
- jump 0x40004000 ; kernel is linked to this address
- nop
-
- .data
-
-input_data:
- .dword 0 ; used by the decompressor
-_cmd_line_magic:
- .dword 0
-_cmd_line_addr:
- .dword 0
-_boot_source:
- .dword 0
-
-#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
-#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
-#else
-#error Only ETRAXFS and ARTPEC-3 supported!
-#endif
+++ /dev/null
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <hwregs/reg_rdwr.h>
-#include <hwregs/reg_map.h>
-#include <hwregs/ser_defs.h>
-#include <hwregs/pinmux_defs.h>
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
-#include <hwregs/clkgen_defs.h>
-#endif
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
- size_t __n);
-
-#define memzero(s, n) memset ((s), 0, (n))
-
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-unsigned inptr = 0; /* index of next byte to be processed in inbuf
- * After decompression it will contain the
- * compressed size, and head.S will read it.
- */
-
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() inbuf[inptr++]
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data; /* lives in head.S */
-
-static long bytes_out;
-static uch *output_data;
-static unsigned long output_ptr;
-
-static void error(char *m);
-
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
-{
- reg_ser_rs_stat_din rs;
- reg_ser_rw_dout dout = {.data = *s};
-
- do {
- rs = REG_RD(ser, regi_ser, rs_stat_din);
- }
- while (!rs.tr_rdy);/* Wait for transceiver. */
-
- REG_WR(ser, regi_ser, rw_dout, dout);
-}
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- serout(s, regi_ser0);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- serout(s, regi_ser1);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- serout(s, regi_ser2);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- serout(s, regi_ser3);
-#endif
- *s++;
- }
-/* CONFIG_ETRAX_DEBUG_PORT_NULL */
-#endif
-}
-
-void*
-memset(void* s, int c, size_t n)
-{
- int i;
- char *ss = (char*)s;
-
- for (i=0;i<n;i++) ss[i] = c;
-
- return s;
-}
-
-void*
-memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
-
- return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void
-flush_window()
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void
-error(char *x)
-{
- puts("\r\n\n");
- puts(x);
- puts("\r\n\n -- System halted\n");
-
- while(1); /* Halt */
-}
-
-void
-setup_normal_output_buffer(void)
-{
- output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-static inline void
-serial_setup(reg_scope_instances regi_ser)
-{
- reg_ser_rw_xoff xoff;
- reg_ser_rw_tr_ctrl tr_ctrl;
- reg_ser_rw_rec_ctrl rec_ctrl;
- reg_ser_rw_tr_baud_div tr_baud;
- reg_ser_rw_rec_baud_div rec_baud;
-
- /* Turn off XOFF. */
- xoff = REG_RD(ser, regi_ser, rw_xoff);
-
- xoff.chr = 0;
- xoff.automatic = regk_ser_no;
-
- REG_WR(ser, regi_ser, rw_xoff, xoff);
-
- /* Set baudrate and stopbits. */
- tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
- rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
- tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
- rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
-
- tr_ctrl.stop_bits = 1; /* 2 stop bits. */
- tr_ctrl.en = 1; /* enable transmitter */
- rec_ctrl.en = 1; /* enabler receiver */
-
- /*
- * The baudrate setup used to be a bit fishy, but now transmitter and
- * receiver are both set to the intended baud rate, 115200.
- * The magic value is 29.493 MHz.
- */
- tr_ctrl.base_freq = regk_ser_f29_493;
- rec_ctrl.base_freq = regk_ser_f29_493;
- tr_baud.div = (29493000 / 8) / 115200;
- rec_baud.div = (29493000 / 8) / 115200;
-
- REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
- REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
- REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
- REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
-}
-
-void
-decompress_kernel(void)
-{
- char revision;
-
-#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
- defined(CONFIG_ETRAX_DEBUG_PORT2) || \
- defined(CONFIG_ETRAX_DEBUG_PORT3)
- reg_pinmux_rw_hwprot hwprot;
-
-#ifdef CONFIG_CRIS_MACH_ARTPEC3
- reg_clkgen_rw_clk_ctrl clk_ctrl;
-
- /* Enable corresponding clock region when serial 1..3 selected */
-
- clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
- clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
- REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
-#endif
-
- /* pinmux setup for ports 1..3 */
- hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-#endif
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- serial_setup(regi_ser0);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- hwprot.ser1 = regk_pinmux_yes;
- serial_setup(regi_ser1);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- hwprot.ser2 = regk_pinmux_yes;
- serial_setup(regi_ser2);
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- hwprot.ser3 = regk_pinmux_yes;
- serial_setup(regi_ser3);
-#endif
-#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
- defined(CONFIG_ETRAX_DEBUG_PORT2) || \
- defined(CONFIG_ETRAX_DEBUG_PORT3)
- REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-#endif
-
- /* input_data is set in head.S */
- inbuf = input_data;
-
- setup_normal_output_buffer();
-
- makecrc();
-
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 32)
- {
- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
- while(1);
- }
-
- puts("Uncompressing Linux...\r\n");
- gunzip();
- puts("Done. Now booting the kernel.\r\n");
-}
+++ /dev/null
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
- -I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
- $(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
- $(call if_changed,objcopy)
- cp -p $(obj)/rescue.bin $(objtree)
+++ /dev/null
-/*
- * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
- * kernel decompressor.
- *
- * In practice, this only works for NOR flash (or some convoluted RAM boot)
- * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
- *
- */
-
-#include <mach/startup.inc>
-
-#ifdef CONFIG_ETRAX_AXISFLASHMAP
-
-;; Code
-
- .text
-start:
-
- ;; Start clocks for used blocks.
- START_CLOCKS
-
- move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10
- jump $r10 ; Jump to decompressor
- nop
-
-#endif
+++ /dev/null
-/*#OUTPUT_FORMAT(elf32-us-cris) */
-OUTPUT_ARCH (crisv32)
-/* Now that NAND support has been stripped, this file could be simplified,
- * but it doesn't do any harm on the other hand so why bother. */
-
-MEMORY
- {
- bootblk : ORIGIN = 0x38000000,
- LENGTH = 0x00004000
- intmem : ORIGIN = 0x38004000,
- LENGTH = 0x00005000
- }
-
-SECTIONS
-{
- .text :
- {
- _stext = . ;
- *(.text)
- *(.init.text)
- *(.rodata)
- *(.rodata.*)
- _etext = . ;
- } > bootblk
- .data :
- {
- *(.data)
- _edata = . ;
- } > bootblk
- .bss :
- {
- _bss = . ;
- *(.bss)
- _end = ALIGN( 0x10 ) ;
- } > intmem
-
- /* Get rid of stuff from EXPORT_SYMBOL(foo). */
- /DISCARD/ :
- {
- *(__ksymtab_strings)
- *(__ksymtab)
- }
-}
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
process.o ptrace.o setup.o signal.o traps.o time.o \
cache.o cacheflush.o
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
{
}
-void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
+int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
{
unsigned long flags;
spin_lock_irqsave(&irq_lock, flags);
irq_allocations[irq - FIRST_IRQ].mask = *dest;
spin_unlock_irqrestore(&irq_lock, flags);
+
+ return 0;
}
static struct irq_chip crisv32_irq_type = {
--- /dev/null
+Image
+zImage
--- /dev/null
+#
+# arch/cris/boot/Makefile
+#
+
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
+
+subdir- := compressed rescue
+targets := Image
+
+$(obj)/Image: vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo ' Kernel: $@ is ready'
+
+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
+ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+
+$(obj)/zImage: $(obj)/compressed/vmlinux
+ @cp $< $@
+ @echo ' Kernel: $@ is ready'
--- /dev/null
+#
+# arch/cris/boot/compressed/Makefile
+#
+
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# -I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+
+quiet_cmd_image = BUILD $@
+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
+
+targets := vmlinux piggy.gz decompress.o decompress.bin
+
+$(obj)/decompress.o: $(OBJECTS) FORCE
+ $(call if_changed,ld)
+
+$(obj)/decompress.bin: $(obj)/decompress.o FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
+ $(call if_changed,image)
+
+$(obj)/piggy.gz: $(obj)/../Image FORCE
+ $(call if_changed,gzip)
--- /dev/null
+Creation of the self-extracting compressed kernel image (vmlinuz)
+-----------------------------------------------------------------
+
+This can be slightly confusing because it's a process with many steps.
+
+The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
+by that makefile into text and data binary files, vmlinux.text and
+vmlinux.data.
+
+Those files together with a ROM filesystem can be catted together and
+burned into a flash or executed directly at the DRAM origin.
+
+They can also be catted together and compressed with gzip, which is what
+happens in this makefile. Together they make up piggy.img.
+
+The decompressor is built into the file decompress.o. It is turned into
+the binary file decompress.bin, which is catted together with piggy.img
+into the file vmlinuz. It can be executed in an arbitrary place in flash.
+
+Be careful - it assumes some things about free locations in DRAM. It
+assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
+so it puts its code at 0x40700000, and initial stack at 0x40800000.
+
+-Bjorn
--- /dev/null
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
+
+MEMORY
+ {
+ dram : ORIGIN = 0x40700000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ _stext = . ;
+ *(.text)
+ *(.rodata)
+ *(.rodata.*)
+ _etext = . ;
+ } > dram
+ .data :
+ {
+ *(.data)
+ _edata = . ;
+ } > dram
+ .bss :
+ {
+ *(.bss)
+ _end = ALIGN( 0x10 ) ;
+ } > dram
+}
--- /dev/null
+/*#OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_ARCH (crisv32)
+
+MEMORY
+ {
+ dram : ORIGIN = 0x40700000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ _stext = . ;
+ *(.text)
+ *(.rodata)
+ *(.rodata.*)
+ _etext = . ;
+ } > dram
+ .data :
+ {
+ *(.data)
+ _edata = . ;
+ } > dram
+ .bss :
+ {
+ *(.bss)
+ _end = ALIGN( 0x10 ) ;
+ } > dram
+}
--- /dev/null
+/*
+ * arch/cris/boot/compressed/head.S
+ *
+ * Copyright (C) 1999, 2001 Axis Communications AB
+ *
+ * Code that sets up the DRAM registers, calls the
+ * decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+ ;; Exported symbols
+
+ .globl input_data
+
+
+ .text
+
+ nop
+ di
+
+;; We need to initialze DRAM registers before we start using the DRAM
+
+ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
+ beq dram_init_finished
+ nop
+
+#include "../../arch-v10/lib/dram_init.S"
+
+dram_init_finished:
+
+ ;; Initiate the PA and PB ports
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM in an eLinux
+ ;; product and put the sp at the top for now.
+
+ move.d 0x40800000, $sp
+
+ ;; Figure out where the compressed piggyback image is
+ ;; in the flash (since we wont try to copy it to DRAM
+ ;; before unpacking). It is at _edata, but in flash.
+ ;; Use (_edata - basse) as offset to the current PC.
+
+basse: move.d $pc, $r5
+ and.d 0x7fffffff, $r5 ; strip any non-cache bit
+ subq 2, $r5 ; compensate for the move.d $pc instr
+ move.d $r5, $r0 ; save for later - flash address of 'basse'
+ add.d _edata, $r5
+ sub.d basse, $r5 ; $r5 = flash address of '_edata'
+
+ ;; Copy text+data to DRAM
+
+ move.d basse, $r1 ; destination
+ move.d _edata, $r2 ; end destination
+1: move.w [$r0+], $r3
+ move.w $r3, [$r1+]
+ cmp.d $r2, $r1
+ bcs 1b
+ nop
+
+ move.d $r5, [input_data] ; for the decompressor
+
+
+ ;; Clear the decompressors BSS (between _edata and _end)
+
+ moveq 0, $r0
+ move.d _edata, $r1
+ move.d _end, $r2
+1: move.w $r0, [$r1+]
+ cmp.d $r2, $r1
+ bcs 1b
+ nop
+
+ ;; Save command line magic and address.
+ move.d _cmd_line_magic, $r12
+ move.d $r10, [$r12]
+ move.d _cmd_line_addr, $r12
+ move.d $r11, [$r12]
+
+ ;; Do the decompression and save compressed size in inptr
+
+ jsr decompress_kernel
+
+ ;; Put start address of root partition in $r9 so the kernel can use it
+ ;; when mounting from flash
+
+ move.d [input_data], $r9 ; flash address of compressed kernel
+ add.d [inptr], $r9 ; size of compressed kernel
+
+ ;; Restore command line magic and address.
+ move.d _cmd_line_magic, $r10
+ move.d [$r10], $r10
+ move.d _cmd_line_addr, $r11
+ move.d [$r11], $r11
+
+ ;; Enter the decompressed kernel
+ move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
+ jump 0x40004000 ; kernel is linked to this address
+
+ .data
+
+input_data:
+ .dword 0 ; used by the decompressor
+_cmd_line_magic:
+ .dword 0
+_cmd_line_addr:
+ .dword 0
+#include "../../arch-v10/lib/hw_settings.S"
--- /dev/null
+/*
+ * Code that sets up the DRAM registers, calls the
+ * decompressor to unpack the piggybacked kernel, and jumps.
+ *
+ * Copyright (C) 1999 - 2006, Axis Communications AB
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <hwregs/asm/reg_map_asm.h>
+#include <mach/startup.inc>
+
+#define RAM_INIT_MAGIC 0x56902387
+#define COMMAND_LINE_MAGIC 0x87109563
+
+ ;; Exported symbols
+
+ .globl input_data
+
+ .text
+start:
+ di
+
+ ;; Start clocks for used blocks.
+ START_CLOCKS
+
+ ;; Initialize the DRAM registers.
+ cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
+ beq dram_init_finished
+ nop
+
+#if defined CONFIG_ETRAXFS
+#include "../../arch-v32/mach-fs/dram_init.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../../arch-v32/mach-a3/dram_init.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
+
+dram_init_finished:
+
+ GIO_INIT
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM and put
+ ;; the SP at the top for now.
+
+ move.d 0x40800000, $sp
+
+ ;; Figure out where the compressed piggyback image is.
+ ;; It is either in [NOR] flash (we don't want to copy it
+ ;; to DRAM before unpacking), or copied to DRAM
+ ;; by the [NAND] flash boot loader.
+ ;; The piggyback image is at _edata, but relative to where the
+ ;; image is actually located in memory, not where it is linked
+ ;; (the decompressor is linked at 0x40700000+ and runs there).
+ ;; Use (_edata - herami) as offset to the current PC.
+
+hereami:
+ lapcq ., $r5 ; get PC
+ and.d 0x7fffffff, $r5 ; strip any non-cache bit
+ move.d $r5, $r0 ; source address of 'herami'
+ add.d _edata, $r5
+ sub.d hereami, $r5 ; r5 = flash address of '_edata'
+ move.d hereami, $r1 ; destination
+
+ ;; Copy text+data to DRAM
+
+ move.d _edata, $r2 ; end destination
+1: move.w [$r0+], $r3 ; from herami+ source
+ move.w $r3, [$r1+] ; to hereami+ destination (linked address)
+ cmp.d $r2, $r1 ; finish when destination == _edata
+ bcs 1b
+ nop
+ move.d input_data, $r0 ; for the decompressor
+ move.d $r5, [$r0] ; for the decompressor
+
+ ;; Clear the decompressors BSS (between _edata and _end)
+
+ moveq 0, $r0
+ move.d _edata, $r1
+ move.d _end, $r2
+1: move.w $r0, [$r1+]
+ cmp.d $r2, $r1
+ bcs 1b
+ nop
+
+ ;; Save command line magic and address.
+ move.d _cmd_line_magic, $r0
+ move.d $r10, [$r0]
+ move.d _cmd_line_addr, $r0
+ move.d $r11, [$r0]
+
+ ;; Save boot source indicator
+ move.d _boot_source, $r0
+ move.d $r12, [$r0]
+
+ ;; Do the decompression and save compressed size in _inptr
+
+ jsr decompress_kernel
+ nop
+
+ ;; Restore boot source indicator
+ move.d _boot_source, $r12
+ move.d [$r12], $r12
+
+ ;; Restore command line magic and address.
+ move.d _cmd_line_magic, $r10
+ move.d [$r10], $r10
+ move.d _cmd_line_addr, $r11
+ move.d [$r11], $r11
+
+ ;; Put start address of root partition in r9 so the kernel can use it
+ ;; when mounting from flash
+ move.d input_data, $r0
+ move.d [$r0], $r9 ; flash address of compressed kernel
+ move.d inptr, $r0
+ add.d [$r0], $r9 ; size of compressed kernel
+ cmp.d 0x40000000, $r9 ; image in DRAM ?
+ blo enter_kernel ; no, must be [NOR] flash, jump
+ nop ; delay slot
+ and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M
+
+enter_kernel:
+ ;; Enter the decompressed kernel
+ move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
+ jump 0x40004000 ; kernel is linked to this address
+ nop
+
+ .data
+
+input_data:
+ .dword 0 ; used by the decompressor
+_cmd_line_magic:
+ .dword 0
+_cmd_line_addr:
+ .dword 0
+_boot_source:
+ .dword 0
+
+#if defined CONFIG_ETRAXFS
+#include "../../arch-v32/mach-fs/hw_settings.S"
+#elif defined CONFIG_CRIS_MACH_ARTPEC3
+#include "../../arch-v32/mach-a3/hw_settings.S"
+#else
+#error Only ETRAXFS and ARTPEC-3 supported!
+#endif
--- /dev/null
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * adaptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+
+/* where the piggybacked kernel image expects itself to live.
+ * it is the same address we use when we network load an uncompressed
+ * image into DRAM, and it is the address the kernel is linked to live
+ * at by vmlinux.lds.S
+ */
+
+#define KERNEL_LOAD_ADR 0x40004000
+
+#include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/ser_defs.h>
+#include <hwregs/pinmux_defs.h>
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#include <hwregs/clkgen_defs.h>
+#endif
+#else
+#include <arch/svinto.h>
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args) args
+#define STATIC static
+
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
+
+#define memzero(s, n) memset((s), 0, (n))
+
+typedef unsigned char uch;
+typedef unsigned short ush;
+typedef unsigned long ulg;
+
+#define WSIZE 0x8000 /* Window size must be at least 32k, */
+ /* and a power of two */
+
+static uch *inbuf; /* input buffer */
+static uch window[WSIZE]; /* Sliding window buffer */
+
+unsigned inptr = 0; /* index of next byte to be processed in inbuf
+ * After decompression it will contain the
+ * compressed size, and head.S will read it.
+ */
+
+static unsigned outcnt = 0; /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
+#define COMMENT 0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
+#define RESERVED 0xC0 /* bit 6,7: reserved */
+
+#define get_byte() (inbuf[inptr++])
+
+/* Diagnostic functions */
+#ifdef DEBUG
+# define Assert(cond, msg) do { \
+ if (!(cond)) \
+ error(msg); \
+ } while (0)
+# define Trace(x) fprintf x
+# define Tracev(x) do { \
+ if (verbose) \
+ fprintf x; \
+ } while (0)
+# define Tracevv(x) do { \
+ if (verbose > 1) \
+ fprintf x; \
+ } while (0)
+# define Tracec(c, x) do { \
+ if (verbose && (c)) \
+ fprintf x; \
+ } while (0)
+# define Tracecv(c, x) do { \
+ if (verbose > 1 && (c)) \
+ fprintf x; \
+ } while (0)
+#else
+# define Assert(cond, msg)
+# define Trace(x)
+# define Tracev(x)
+# define Tracevv(x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
+#endif
+
+static void flush_window(void);
+static void error(char *m);
+static void puts(const char *);
+
+extern char *input_data; /* lives in head.S */
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+/* the "heap" is put directly after the BSS ends, at end */
+
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
+
+#include "../../../../../lib/inflate.c"
+
+/* decompressor info and error messages to serial console */
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
+{
+ reg_ser_rs_stat_din rs;
+ reg_ser_rw_dout dout = {.data = *s};
+
+ do {
+ rs = REG_RD(ser, regi_ser, rs_stat_din);
+ }
+ while (!rs.tr_rdy);/* Wait for transceiver. */
+
+ REG_WR(ser, regi_ser, rw_dout, dout);
+}
+#endif
+
+static void puts(const char *s)
+{
+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+ while (*s) {
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
+ serout(s, regi_ser0);
+#else
+ while (!(*R_SERIAL0_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL0_TR_DATA = *s++;
+#endif
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
+ serout(s, regi_ser1);
+#else
+ while (!(*R_SERIAL1_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL1_TR_DATA = *s++;
+#endif
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
+ serout(s, regi_ser2);
+#else
+ while (!(*R_SERIAL2_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL2_TR_DATA = *s++;
+#endif
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
+ serout(s, regi_ser3);
+#else
+ while (!(*R_SERIAL3_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL3_TR_DATA = *s++;
+#endif
+#endif
+ *s++;
+ }
+/* CONFIG_ETRAX_DEBUG_PORT_NULL */
+#endif
+}
+
+void *memset(void *s, int c, size_t n)
+{
+ int i;
+ char *ss = (char*)s;
+
+ for (i=0;i<n;i++) ss[i] = c;
+
+ return s;
+}
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+ int i;
+ char *d = (char *)__dest, *s = (char *)__src;
+
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
+
+ return __dest;
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+
+static void flush_window(void)
+{
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out = *in;
+ out++;
+ in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
+}
+
+static void error(char *x)
+{
+ puts("\n\n");
+ puts(x);
+ puts("\n\n -- System halted\n");
+
+ while(1); /* Halt */
+}
+
+void setup_normal_output_buffer(void)
+{
+ output_data = (char *)KERNEL_LOAD_ADR;
+}
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
+{
+ reg_ser_rw_xoff xoff;
+ reg_ser_rw_tr_ctrl tr_ctrl;
+ reg_ser_rw_rec_ctrl rec_ctrl;
+ reg_ser_rw_tr_baud_div tr_baud;
+ reg_ser_rw_rec_baud_div rec_baud;
+
+ /* Turn off XOFF. */
+ xoff = REG_RD(ser, regi_ser, rw_xoff);
+
+ xoff.chr = 0;
+ xoff.automatic = regk_ser_no;
+
+ REG_WR(ser, regi_ser, rw_xoff, xoff);
+
+ /* Set baudrate and stopbits. */
+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+ tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
+ rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
+
+ tr_ctrl.stop_bits = 1; /* 2 stop bits. */
+ tr_ctrl.en = 1; /* enable transmitter */
+ rec_ctrl.en = 1; /* enabler receiver */
+
+ /*
+ * The baudrate setup used to be a bit fishy, but now transmitter and
+ * receiver are both set to the intended baud rate, 115200.
+ * The magic value is 29.493 MHz.
+ */
+ tr_ctrl.base_freq = regk_ser_f29_493;
+ rec_ctrl.base_freq = regk_ser_f29_493;
+ tr_baud.div = (29493000 / 8) / 115200;
+ rec_baud.div = (29493000 / 8) / 115200;
+
+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+ REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+ REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
+}
+#endif
+
+void decompress_kernel(void)
+{
+ char revision;
+ char compile_rev;
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+ /* Need at least a CRISv32 to run. */
+ compile_rev = 32;
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+ defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+ defined(CONFIG_ETRAX_DEBUG_PORT3)
+ reg_pinmux_rw_hwprot hwprot;
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+ reg_clkgen_rw_clk_ctrl clk_ctrl;
+
+ /* Enable corresponding clock region when serial 1..3 selected */
+
+ clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
+ clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
+ REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
+#endif
+
+ /* pinmux setup for ports 1..3 */
+ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
+#endif
+
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ serial_setup(regi_ser0);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ hwprot.ser1 = regk_pinmux_yes;
+ serial_setup(regi_ser1);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ hwprot.ser2 = regk_pinmux_yes;
+ serial_setup(regi_ser2);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ hwprot.ser3 = regk_pinmux_yes;
+ serial_setup(regi_ser3);
+#endif
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+ defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+ defined(CONFIG_ETRAX_DEBUG_PORT3)
+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
+#endif
+
+ /* input_data is set in head.S */
+ inbuf = input_data;
+#else /* CRISv10 */
+ /* Need at least a crisv10 to run. */
+ compile_rev = 10;
+
+ /* input_data is set in head.S */
+ inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ *R_SERIAL0_XOFF = 0;
+ *R_SERIAL0_BAUD = 0x99;
+ *R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ *R_SERIAL1_XOFF = 0;
+ *R_SERIAL1_BAUD = 0x99;
+ *R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ *R_GEN_CONFIG = 0x08;
+ *R_SERIAL2_XOFF = 0;
+ *R_SERIAL2_BAUD = 0x99;
+ *R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ *R_GEN_CONFIG = 0x100;
+ *R_SERIAL3_XOFF = 0;
+ *R_SERIAL3_BAUD = 0x99;
+ *R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
+
+ setup_normal_output_buffer();
+
+ makecrc();
+
+ __asm__ volatile ("move $vr,%0" : "=rm" (revision));
+ if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+ puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+ puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
+ while(1);
+ }
+
+ puts("Uncompressing Linux...\n");
+ gunzip();
+ puts("Done. Now booting the kernel\n");
+}
--- /dev/null
+#
+# Makefile for rescue (bootstrap) code
+#
+
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
+OBJCOPYFLAGS = -O binary --remove-section=.bss
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
+
+targets := rescue.o rescue.bin
+
+$(obj)/rescue.o: $(OBJECTS) FORCE
+ $(call if_changed,ld)
+
+$(obj)/rescue.bin: $(obj)/rescue.o FORCE
+ $(call if_changed,objcopy)
+ cp -p $(obj)/rescue.bin $(objtree)
+
+$(obj)/testrescue.bin: $(obj)/testrescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
+# Pad it to 784 bytes
+ dd if=/dev/zero of=tmp2423 bs=1 count=784
+ cat tr.bin tmp2423 >testrescue_tmp.bin
+ dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
+ rm tr.bin tmp2423 testrescue_tmp.bin
+
+
+$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
+# Pad it to 784 bytes, that's what the rescue loader expects
+ dd if=/dev/zero of=tmp2423 bs=1 count=784
+ cat ktr.bin tmp2423 >kimagerescue_tmp.bin
+ dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
+ rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
--- /dev/null
+/*
+ * Rescue code, made to reside at the beginning of the
+ * flash-memory. when it starts, it checks a partition
+ * table at the first sector after the rescue sector.
+ * the partition table was generated by the product builder
+ * script and contains offsets, lengths, types and checksums
+ * for each partition that this code should check.
+ *
+ * If any of the checksums fail, we assume the flash is so
+ * corrupt that we cant use it to boot into the ftp flash
+ * loader, and instead we initialize the serial port to
+ * receive a flash-loader and new flash image. we dont include
+ * any flash code here, but just accept a certain amount of
+ * bytes from the serial port and jump into it. the downloaded
+ * code is put in the cache.
+ *
+ * The partitiontable is designed so that it is transparent to
+ * code execution - it has a relative branch opcode in the
+ * beginning that jumps over it. each entry contains extra
+ * data so we can add stuff later.
+ *
+ * Partition table format:
+ *
+ * Code transparency:
+ *
+ * 2 bytes [opcode 'nop']
+ * 2 bytes [opcode 'di']
+ * 4 bytes [opcode 'ba <offset>', 8-bit or 16-bit version]
+ * 2 bytes [opcode 'nop', delay slot]
+ *
+ * Table validation (at +10):
+ *
+ * 2 bytes [magic/version word for partitiontable - 0xef, 0xbe]
+ * 2 bytes [length of all entries plus the end marker]
+ * 4 bytes [checksum for the partitiontable itself]
+ *
+ * Entries, each with the following format, last has offset -1:
+ *
+ * 4 bytes [offset in bytes, from start of flash]
+ * 4 bytes [length in bytes of partition]
+ * 4 bytes [checksum, simple longword sum]
+ * 2 bytes [partition type]
+ * 2 bytes [flags, only bit 0 used, ro/rw = 1/0]
+ * 16 bytes [reserved for future use]
+ *
+ * End marker
+ *
+ * 4 bytes [-1]
+ *
+ * 10 bytes [0, padding]
+ *
+ * Bit 0 in flags signifies RW or RO. The rescue code only bothers
+ * to check the checksum for RO partitions, since the others will
+ * change their data without updating the checksums. A 1 in bit 0
+ * means RO, 0 means RW. That way, it is possible to set a partition
+ * in RO mode initially, and later mark it as RW, since you can always
+ * write 0's to the flash.
+ *
+ * During the wait for serial input, the status LED will flash so the
+ * user knows something went wrong.
+ *
+ * Copyright (C) 1999-2007 Axis Communications AB
+ */
+
+#ifdef CONFIG_ETRAX_AXISFLASHMAP
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+ ;; The partitiontable is looked for at the first sector after the boot
+ ;; sector. Sector size is 65536 bytes in all flashes we use.
+
+#define PTABLE_START CONFIG_ETRAX_PTABLE_SECTOR
+#define PTABLE_MAGIC 0xbeef
+
+ ;; The normal Etrax100 on-chip boot ROM does serial boot at 0x380000f0.
+ ;; That is not where we put our downloaded serial boot-code.
+ ;; The length is enough for downloading code that loads the rest
+ ;; of itself (after having setup the DRAM etc).
+ ;; It is the same length as the on-chip ROM loads, so the same
+ ;; host loader can be used to load a rescued product as well as
+ ;; one booted through the Etrax serial boot code.
+
+#define CODE_START 0x40000000
+#define CODE_LENGTH 784
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+#define NOP_DI 0xf025050f
+#define RAM_INIT_MAGIC 0x56902387
+
+ .text
+
+ ;; This is the entry point of the rescue code
+ ;; 0x80000000 if loaded in flash (as it should be)
+ ;; Since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+ nop
+ di
+
+ jump in_cache ; enter cached area instead
+in_cache:
+
+
+ ;; First put a jump test to give a possibility of upgrading the
+ ;; rescue code without erasing/reflashing the sector.
+ ;; We put a longword of -1 here and if it is not -1, we jump using
+ ;; the value as jump target. Since we can always change 1's to 0's
+ ;; without erasing the sector, it is possible to add new
+ ;; code after this and altering the jumptarget in an upgrade.
+
+jtcd: move.d [jumptarget], $r0
+ cmp.d 0xffffffff, $r0
+ beq no_newjump
+ nop
+
+ jump [$r0]
+
+jumptarget:
+ .dword 0xffffffff ; can be overwritten later to insert new code
+
+no_newjump:
+#ifdef CONFIG_ETRAX_ETHERNET
+ ;; Start MII clock to make sure it is running when tranceiver is reset
+ move.d 0x3, $r0 ; enable = on, phy = mii_clk
+ move.d $r0, [R_NETWORK_GEN_CONFIG]
+#endif
+
+ ;; We need to setup the bus registers before we start using the DRAM
+#include "../../../arch-v10/lib/dram_init.S"
+
+ ;; we now should go through the checksum-table and check the listed
+ ;; partitions for errors.
+
+ move.d PTABLE_START, $r3
+ move.d [$r3], $r0
+ cmp.d NOP_DI, $r0 ; make sure the nop/di is there...
+ bne do_rescue
+ nop
+
+ ;; skip the code transparency block (10 bytes).
+
+ addq 10, $r3
+
+ ;; check for correct magic
+
+ move.w [$r3+], $r0
+ cmp.w PTABLE_MAGIC, $r0
+ bne do_rescue ; didn't recognize - trig rescue
+ nop
+
+ ;; check for correct ptable checksum
+
+ movu.w [$r3+], $r2 ; ptable length
+ move.d $r2, $r8 ; save for later, length of total ptable
+ addq 28, $r8 ; account for the rest
+ move.d [$r3+], $r4 ; ptable checksum
+ move.d $r3, $r1
+ jsr checksum ; r1 source, r2 length, returns in r0
+
+ cmp.d $r0, $r4
+ bne do_rescue ; didn't match - trig rescue
+ nop
+
+ ;; ptable is ok. validate each entry.
+
+ moveq -1, $r7
+
+ploop: move.d [$r3+], $r1 ; partition offset (from ptable start)
+ bne notfirst ; check if it is the partition containing ptable
+ nop ; yes..
+ move.d $r8, $r1 ; for its checksum check, skip the ptable
+ move.d [$r3+], $r2 ; partition length
+ sub.d $r8, $r2 ; minus the ptable length
+ ba bosse
+ nop
+notfirst:
+ cmp.d -1, $r1 ; the end of the ptable ?
+ beq flash_ok ; if so, the flash is validated
+ move.d [$r3+], $r2 ; partition length
+bosse: move.d [$r3+], $r5 ; checksum
+ move.d [$r3+], $r4 ; type and flags
+ addq 16, $r3 ; skip the reserved bytes
+ btstq 16, $r4 ; check ro flag
+ bpl ploop ; rw partition, skip validation
+ nop
+ btstq 17, $r4 ; check bootable flag
+ bpl 1f
+ nop
+ move.d $r1, $r7 ; remember boot partition offset
+1:
+ add.d PTABLE_START, $r1
+
+ jsr checksum ; checksum the partition
+
+ cmp.d $r0, $r5
+ beq ploop ; checksums matched, go to next entry
+ nop
+
+ ;; otherwise fall through to the rescue code.
+
+do_rescue:
+ ;; setup port PA and PB default initial directions and data
+ ;; (so we can flash LEDs, and so that DTR and others are set)
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ ;; setup the serial port at 115200 baud
+
+ moveq 0, $r0
+ move.d $r0, [SERXOFF]
+
+ move.b 0x99, $r0
+ move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit and receive
+
+ move.b 0x40, $r0 ; rec enable
+ move.b $r0, [SERRECC]
+
+ moveq 0, $r1 ; "timer" to clock out a LED red flash
+ move.d CODE_START, $r3 ; destination counter
+ movu.w CODE_LENGTH, $r4; length
+
+wait_ser:
+ addq 1, $r1
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+ move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+ btstq 16, $r1
+ bpl 1f
+ nop
+ or.d $r0, $r2 ; set bit
+ ba 2f
+ nop
+1: not $r0 ; clear bit
+ and.d $r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b $r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b $r2, [R_PORT_PB_DATA]
+#endif
+#ifdef CONFIG_ETRAX_90000000_LEDS
+ move.b $r2, [0x90000000]
+#endif
+#endif
+
+ ;; check if we got something on the serial port
+
+ move.b [SERSTAT], $r0
+ btstq 0, $r0 ; data_avail
+ bpl wait_ser
+ nop
+
+ ;; got something - copy the byte and loop
+
+ move.b [SERRDAT], $r0
+ move.b $r0, [$r3+]
+
+ subq 1, $r4 ; decrease length
+ bne wait_ser
+ nop
+
+ ;; jump into downloaded code
+
+ move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is
+ ; initialized
+ jump CODE_START
+
+flash_ok:
+ ;; check r7, which contains either -1 or the partition to boot from
+
+ cmp.d -1, $r7
+ bne 1f
+ nop
+ move.d PTABLE_START, $r7; otherwise use the ptable start
+1:
+ move.d RAM_INIT_MAGIC, $r8 ; Tell next product that DRAM is
+ ; initialized
+ jump $r7 ; boot!
+
+
+ ;; Helper subroutines
+
+ ;; Will checksum by simple addition
+ ;; r1 - source
+ ;; r2 - length in bytes
+ ;; result will be in r0
+checksum:
+ moveq 0, $r0
+ moveq CONFIG_ETRAX_FLASH1_SIZE, $r6
+
+ ;; If the first physical flash memory is exceeded wrap to the
+ ;; second one
+ btstq 26, $r1 ; Are we addressing first flash?
+ bpl 1f
+ nop
+ clear.d $r6
+
+1: test.d $r6 ; 0 = no wrapping
+ beq 2f
+ nop
+ lslq 20, $r6 ; Convert MB to bytes
+ sub.d $r1, $r6
+
+2: addu.b [$r1+], $r0
+ subq 1, $r6 ; Flash memory left
+ beq 3f
+ subq 1, $r2 ; Length left
+ bne 2b
+ nop
+ ret
+ nop
+
+3: move.d MEM_CSE1_START, $r1 ; wrap to second flash
+ ba 2b
+ nop
+
+#endif
--- /dev/null
+/*
+ * Just get started by jumping to CONFIG_ETRAX_PTABLE_SECTOR to start
+ * kernel decompressor.
+ *
+ * In practice, this only works for NOR flash (or some convoluted RAM boot)
+ * and hence is not really useful for Artpec-3, so it's Etrax FS / NOR only.
+ *
+ */
+
+#include <mach/startup.inc>
+
+#ifdef CONFIG_ETRAX_AXISFLASHMAP
+
+;; Code
+
+ .text
+start:
+
+ ;; Start clocks for used blocks.
+ START_CLOCKS
+
+ move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10
+ jump $r10 ; Jump to decompressor
+ nop
+
+#endif
--- /dev/null
+/*
+ * Rescue code to be prepended on a kimage and copied to the
+ * rescue serial port.
+ * This is called from the rescue code, it will copy received data to
+ * 4004000 and after a timeout jump to it.
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+#define CODE_START 0x40004000
+#define CODE_LENGTH 784
+#define TIMEOUT_VALUE 1000
+
+
+#ifdef CONFIG_ETRAX_RESCUE_SER0
+#define SERXOFF R_SERIAL0_XOFF
+#define SERBAUD R_SERIAL0_BAUD
+#define SERRECC R_SERIAL0_REC_CTRL
+#define SERRDAT R_SERIAL0_REC_DATA
+#define SERSTAT R_SERIAL0_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER1
+#define SERXOFF R_SERIAL1_XOFF
+#define SERBAUD R_SERIAL1_BAUD
+#define SERRECC R_SERIAL1_REC_CTRL
+#define SERRDAT R_SERIAL1_REC_DATA
+#define SERSTAT R_SERIAL1_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER2
+#define SERXOFF R_SERIAL2_XOFF
+#define SERBAUD R_SERIAL2_BAUD
+#define SERRECC R_SERIAL2_REC_CTRL
+#define SERRDAT R_SERIAL2_REC_DATA
+#define SERSTAT R_SERIAL2_STATUS
+#endif
+#ifdef CONFIG_ETRAX_RESCUE_SER3
+#define SERXOFF R_SERIAL3_XOFF
+#define SERBAUD R_SERIAL3_BAUD
+#define SERRECC R_SERIAL3_REC_CTRL
+#define SERRDAT R_SERIAL3_REC_DATA
+#define SERSTAT R_SERIAL3_STATUS
+#endif
+
+ .text
+ ;; This is the entry point of the rescue code
+ ;; 0x80000000 if loaded in flash (as it should be)
+ ;; since etrax actually starts at address 2 when booting from flash, we
+ ;; put a nop (2 bytes) here first so we dont accidentally skip the di
+
+ nop
+ di
+#ifndef CONFIG_SVINTO_SIM
+ ;; setup port PA and PB default initial directions and data
+ ;; (so we can flash LEDs, and so that DTR and others are set)
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+ move.b $r0, [R_PORT_PA_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+ move.b $r0, [R_PORT_PA_DATA]
+
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+ move.b $r0, [R_PORT_PB_DIR]
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+ move.b $r0, [R_PORT_PB_DATA]
+
+ ;; We need to setup the bus registers before we start using the DRAM
+#include "../../lib/dram_init.S"
+
+#endif
+ ;; Setup the stack to a suitably high address.
+ ;; We assume 8 MB is the minimum DRAM in an eLinux
+ ;; product and put the sp at the top for now.
+
+ move.d 0x40800000, $sp
+
+ ;; setup the serial port at 115200 baud
+
+ moveq 0, $r0
+ move.d $r0, [SERXOFF]
+
+ move.b 0x99, $r0
+ move.b $r0, [SERBAUD] ; 115.2kbaud for both transmit
+ ; and receive
+
+ move.b 0x40, $r0 ; rec enable
+ move.b $r0, [SERRECC]
+
+
+ moveq 0, $r1 ; "timer" to clock out a LED red flash
+ move.d CODE_START, $r3 ; destination counter
+ move.d CODE_LENGTH, $r4 ; length
+ move.d TIMEOUT_VALUE, $r5 ; "timeout" until jump
+
+wait_ser:
+ addq 1, $r1
+ subq 1, $r5 ; decrease timeout
+ beq jump_start ; timed out
+ nop
+#ifndef CONFIG_ETRAX_NO_LEDS
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r2
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r2
+#endif
+ move.d (1 << CONFIG_ETRAX_LED1R) | (1 << CONFIG_ETRAX_LED2R), $r0
+ btstq 16, $r1
+ bpl 1f
+ nop
+ or.d $r0, $r2 ; set bit
+ ba 2f
+ nop
+1: not $r0 ; clear bit
+ and.d $r0, $r2
+2:
+#ifdef CONFIG_ETRAX_PA_LEDS
+ move.b $r2, [R_PORT_PA_DATA]
+#endif
+#ifdef CONFIG_ETRAX_PB_LEDS
+ move.b $r2, [R_PORT_PB_DATA]
+#endif
+#endif
+
+ ;; check if we got something on the serial port
+
+ move.b [SERSTAT], $r0
+ btstq 0, $r0 ; data_avail
+ bpl wait_ser
+ nop
+
+ ;; got something - copy the byte and loop
+
+ move.b [SERRDAT], $r0
+ move.b $r0, [$r3+]
+ move.d TIMEOUT_VALUE, $r5 ; reset "timeout"
+ subq 1, $r4 ; decrease length
+ bne wait_ser
+ nop
+jump_start:
+ ;; jump into downloaded code
+
+ jump CODE_START
--- /dev/null
+MEMORY
+ {
+ flash : ORIGIN = 0x00000000,
+ LENGTH = 0x00100000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ stext = . ;
+ *(.text)
+ etext = . ;
+ } > flash
+ .data :
+ {
+ *(.data)
+ edata = . ;
+ } > flash
+}
--- /dev/null
+/*#OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_ARCH (crisv32)
+/* Now that NAND support has been stripped, this file could be simplified,
+ * but it doesn't do any harm on the other hand so why bother. */
+
+MEMORY
+ {
+ bootblk : ORIGIN = 0x38000000,
+ LENGTH = 0x00004000
+ intmem : ORIGIN = 0x38004000,
+ LENGTH = 0x00005000
+ }
+
+SECTIONS
+{
+ .text :
+ {
+ _stext = . ;
+ *(.text)
+ *(.init.text)
+ *(.rodata)
+ *(.rodata.*)
+ _etext = . ;
+ } > bootblk
+ .data :
+ {
+ *(.data)
+ _edata = . ;
+ } > bootblk
+ .bss :
+ {
+ _bss = . ;
+ *(.bss)
+ _end = ALIGN( 0x10 ) ;
+ } > intmem
+
+ /* Get rid of stuff from EXPORT_SYMBOL(foo). */
+ /DISCARD/ :
+ {
+ *(__ksymtab_strings)
+ *(__ksymtab)
+ }
+}
--- /dev/null
+/*
+ * Simple testcode to download by the rescue block.
+ * Just lights some LEDs to show it was downloaded correctly.
+ *
+ * Copyright (C) 1999 Axis Communications AB
+ */
+
+#define ASSEMBLER_MACROS_ONLY
+#include <arch/sv_addr_ag.h>
+
+ .text
+
+ nop
+ nop
+ moveq -1, $r2
+ move.b $r2, [R_PORT_PA_DIR]
+ moveq 0, $r2
+ move.b $r2, [R_PORT_PA_DATA]
+
+endless:
+ nop
+ ba endless
+ nop
+
--- /dev/null
+/*
+ * linux/tools/build.c
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+/*
+ * This file builds a disk-image from three different files:
+ *
+ * - bootsect: exactly 512 bytes of 8086 machine code, loads the rest
+ * - setup: 8086 machine code, sets up system parm
+ * - system: 80386 code for actual system
+ *
+ * It does some checking that all files are of the correct type, and
+ * just writes the result to stdout, removing headers and padding to
+ * the right amount. It also writes some system data to stderr.
+ */
+
+/*
+ * Changes by tytso to allow root device specification
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ * Cross compiling fixes by Gertjan van Wingerde, July 1996
+ */
+
+#include <stdio.h> /* fprintf */
+#include <string.h>
+#include <stdlib.h> /* contains exit */
+#include <sys/types.h> /* unistd.h needs this */
+#include <sys/stat.h>
+#include <sys/sysmacros.h>
+#include <unistd.h> /* contains read/write */
+#include <fcntl.h>
+#include <errno.h>
+
+#define MINIX_HEADER 32
+
+#define N_MAGIC_OFFSET 1024
+#ifndef __BFD__
+static int GCC_HEADER = sizeof(struct exec);
+#endif
+
+#ifdef __BIG_KERNEL__
+#define SYS_SIZE 0xffff
+#else
+#define SYS_SIZE DEF_SYSSIZE
+#endif
+
+#define DEFAULT_MAJOR_ROOT 0
+#define DEFAULT_MINOR_ROOT 0
+
+/* max nr of sectors of setup: don't change unless you also change
+ * bootsect etc */
+#define SETUP_SECTS 4
+
+#define STRINGIFY(x) #x
+
+typedef union {
+ int i;
+ long l;
+ short s[2];
+ char b[4];
+} conv;
+
+long intel_long(long l)
+{
+ conv t;
+
+ t.b[0] = l & 0xff; l >>= 8;
+ t.b[1] = l & 0xff; l >>= 8;
+ t.b[2] = l & 0xff; l >>= 8;
+ t.b[3] = l & 0xff; l >>= 8;
+ return t.l;
+}
+
+int intel_int(int i)
+{
+ conv t;
+
+ t.b[0] = i & 0xff; i >>= 8;
+ t.b[1] = i & 0xff; i >>= 8;
+ t.b[2] = i & 0xff; i >>= 8;
+ t.b[3] = i & 0xff; i >>= 8;
+ return t.i;
+}
+
+short intel_short(short l)
+{
+ conv t;
+
+ t.b[0] = l & 0xff; l >>= 8;
+ t.b[1] = l & 0xff; l >>= 8;
+ return t.s[0];
+}
+
+void die(const char * str)
+{
+ fprintf(stderr,"%s\n",str);
+ exit(1);
+}
+
+void usage(void)
+{
+ die("Usage: build bootsect setup system [rootdev] [> image]");
+}
+
+int main(int argc, char ** argv)
+{
+ int i,c,id,sz,tmp_int;
+ unsigned long sys_size, tmp_long;
+ char buf[1024];
+#ifndef __BFD__
+ struct exec *ex = (struct exec *)buf;
+#endif
+ char major_root, minor_root;
+ struct stat sb;
+ unsigned char setup_sectors;
+
+ if ((argc < 4) || (argc > 5))
+ usage();
+ if (argc > 4) {
+ if (!strcmp(argv[4], "CURRENT")) {
+ if (stat("/", &sb)) {
+ perror("/");
+ die("Couldn't stat /");
+ }
+ major_root = major(sb.st_dev);
+ minor_root = minor(sb.st_dev);
+ } else if (strcmp(argv[4], "FLOPPY")) {
+ if (stat(argv[4], &sb)) {
+ perror(argv[4]);
+ die("Couldn't stat root device.");
+ }
+ major_root = major(sb.st_rdev);
+ minor_root = minor(sb.st_rdev);
+ } else {
+ major_root = 0;
+ minor_root = 0;
+ }
+ } else {
+ major_root = DEFAULT_MAJOR_ROOT;
+ minor_root = DEFAULT_MINOR_ROOT;
+ }
+ fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
+ for (i=0;i<sizeof buf; i++) buf[i]=0;
+ if ((id=open(argv[1],O_RDONLY,0))<0)
+ die("Unable to open 'boot'");
+ if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+ die("Unable to read header of 'boot'");
+ if (((long *) buf)[0]!=intel_long(0x04100301))
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[3] != 0)
+ die("Illegal data segment in 'boot'");
+ if (((long *) buf)[4] != 0)
+ die("Illegal bss in 'boot'");
+ if (((long *) buf)[5] != 0)
+ die("Non-Minix header of 'boot'");
+ if (((long *) buf)[7] != 0)
+ die("Illegal symbol table in 'boot'");
+ i=read(id,buf,sizeof buf);
+ fprintf(stderr,"Boot sector %d bytes.\n",i);
+ if (i != 512)
+ die("Boot block must be exactly 512 bytes");
+ if ((*(unsigned short *)(buf+510)) != (unsigned short)intel_short(0xAA55))
+ die("Boot block hasn't got boot flag (0xAA55)");
+ buf[508] = (char) minor_root;
+ buf[509] = (char) major_root;
+ i=write(1,buf,512);
+ if (i!=512)
+ die("Write call failed");
+ close (id);
+
+ if ((id=open(argv[2],O_RDONLY,0))<0)
+ die("Unable to open 'setup'");
+ if (read(id,buf,MINIX_HEADER) != MINIX_HEADER)
+ die("Unable to read header of 'setup'");
+ if (((long *) buf)[0]!=intel_long(0x04100301))
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[1]!=intel_long(MINIX_HEADER))
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[3] != 0)
+ die("Illegal data segment in 'setup'");
+ if (((long *) buf)[4] != 0)
+ die("Illegal bss in 'setup'");
+ if (((long *) buf)[5] != 0)
+ die("Non-Minix header of 'setup'");
+ if (((long *) buf)[7] != 0)
+ die("Illegal symbol table in 'setup'");
+ for (i=0 ; (c=read(id,buf,sizeof buf))>0 ; i+=c )
+#ifdef __BIG_KERNEL__
+ {
+ if (!i) {
+ /* Working with memcpy because of alignment constraints
+ on Sparc - Gertjan */
+ memcpy(&tmp_long, &buf[2], sizeof(long));
+ if (tmp_long != intel_long(0x53726448) )
+ die("Wrong magic in loader header of 'setup'");
+ memcpy(&tmp_int, &buf[6], sizeof(int));
+ if (tmp_int < intel_int(0x200))
+ die("Wrong version of loader header of 'setup'");
+ buf[0x11] = 1; /* LOADED_HIGH */
+ tmp_long = intel_long(0x100000);
+ memcpy(&buf[0x14], &tmp_long, sizeof(long)); /* code32_start */
+ }
+#endif
+ if (write(1,buf,c)!=c)
+ die("Write call failed");
+#ifdef __BIG_KERNEL__
+ }
+#endif
+ if (c != 0)
+ die("read-error on 'setup'");
+ close (id);
+ setup_sectors = (unsigned char)((i + 511) / 512);
+ /* for compatibility with LILO */
+ if (setup_sectors < SETUP_SECTS)
+ setup_sectors = SETUP_SECTS;
+ fprintf(stderr,"Setup is %d bytes.\n",i);
+ for (c=0 ; c<sizeof(buf) ; c++)
+ buf[c] = '\0';
+ while (i < setup_sectors * 512) {
+ c = setup_sectors * 512 - i;
+ if (c > sizeof(buf))
+ c = sizeof(buf);
+ if (write(1,buf,c) != c)
+ die("Write call failed");
+ i += c;
+ }
+
+ if ((id=open(argv[3],O_RDONLY,0))<0)
+ die("Unable to open 'system'");
+#ifndef __BFD__
+ if (read(id,buf,GCC_HEADER) != GCC_HEADER)
+ die("Unable to read header of 'system'");
+ if (N_MAGIC(*ex) == ZMAGIC) {
+ GCC_HEADER = N_MAGIC_OFFSET;
+ lseek(id, GCC_HEADER, SEEK_SET);
+ } else if (N_MAGIC(*ex) != QMAGIC)
+ die("Non-GCC header of 'system'");
+ fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n",
+ (ex->a_text+ex->a_data+ex->a_bss)/1024,
+ ex->a_text /1024,
+ ex->a_data /1024,
+ ex->a_bss /1024);
+ sz = N_SYMOFF(*ex) - GCC_HEADER + 4;
+#else
+ if (fstat (id, &sb)) {
+ perror ("fstat");
+ die ("Unable to stat 'system'");
+ }
+ sz = sb.st_size;
+ fprintf (stderr, "System is %d kB\n", sz/1024);
+#endif
+ sys_size = (sz + 15) / 16;
+ if (sys_size > SYS_SIZE)
+ die("System is too big");
+ while (sz > 0) {
+ int l, n;
+
+ l = sz;
+ if (l > sizeof(buf))
+ l = sizeof(buf);
+ if ((n=read(id, buf, l)) != l) {
+ if (n == -1)
+ perror(argv[1]);
+ else
+ fprintf(stderr, "Unexpected EOF\n");
+ die("Can't read 'system'");
+ }
+ if (write(1, buf, l) != l)
+ die("Write failed");
+ sz -= l;
+ }
+ close(id);
+ if (lseek(1, 497, 0) == 497) {
+ if (write(1, &setup_sectors, 1) != 1)
+ die("Write of setup sectors failed");
+ }
+ if (lseek(1,500,0) == 500) {
+ buf[0] = (sys_size & 0xff);
+ buf[1] = ((sys_size >> 8) & 0xff);
+ if (write(1, buf, 2) != 2)
+ die("Write failed");
+ }
+ return(0);
+}
#define __NR_mbind 274
#define __NR_get_mempolicy 275
#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
+#define __NR_mq_open 277
#define __NR_mq_unlink (__NR_mq_open+1)
#define __NR_mq_timedsend (__NR_mq_open+2)
#define __NR_mq_timedreceive (__NR_mq_open+3)
#define __NR_fallocate 324
#define __NR_timerfd_settime 325
#define __NR_timerfd_gettime 326
+#define __NR_signalfd4 327
+#define __NR_eventfd2 328
+#define __NR_epoll_create1 329
+#define __NR_dup3 330
+#define __NR_pipe2 331
+#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
#ifdef __KERNEL__
-#define NR_syscalls 327
+#define NR_syscalls 335
#include <arch/unistd.h>
--- /dev/null
+include include/asm-generic/Kbuild.asm
+
+header-y += registers.h
+
+unifdef-y += termios.h
--- /dev/null
+/* atomic.h: atomic operation emulation for FR-V
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ * Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#include <linux/types.h>
+#include <asm/spr-regs.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ *
+ * We do not have SMP systems, so we don't have to deal with that.
+ */
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#define ATOMIC_INIT(i) { (i) }
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long val;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " add%I2 %1,%2,%1 \n"
+ " cst.p %1,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ : "+U"(v->counter), "=&r"(val)
+ : "NPr"(i)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long val;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " sub%I2 %1,%2,%1 \n"
+ " cst.p %1,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ : "+U"(v->counter), "=&r"(val)
+ : "NPr"(i)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ return val;
+}
+
+#else
+
+extern int atomic_add_return(int i, atomic_t *v);
+extern int atomic_sub_return(int i, atomic_t *v);
+
+#endif
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+ return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+ atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+ atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+ atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+
+/*****************************************************************************/
+/*
+ * exchange value with memory
+ */
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define xchg(ptr, x) \
+({ \
+ __typeof__(ptr) __xg_ptr = (ptr); \
+ __typeof__(*(ptr)) __xg_orig; \
+ \
+ switch (sizeof(__xg_orig)) { \
+ case 4: \
+ asm volatile( \
+ "swap%I0 %M0,%1" \
+ : "+m"(*__xg_ptr), "=r"(__xg_orig) \
+ : "1"(x) \
+ : "memory" \
+ ); \
+ break; \
+ \
+ default: \
+ __xg_orig = (__typeof__(__xg_orig))0; \
+ asm volatile("break"); \
+ break; \
+ } \
+ \
+ __xg_orig; \
+})
+
+#else
+
+extern uint32_t __xchg_32(uint32_t i, volatile void *v);
+
+#define xchg(ptr, x) \
+({ \
+ __typeof__(ptr) __xg_ptr = (ptr); \
+ __typeof__(*(ptr)) __xg_orig; \
+ \
+ switch (sizeof(__xg_orig)) { \
+ case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr); break; \
+ default: \
+ __xg_orig = (__typeof__(__xg_orig))0; \
+ asm volatile("break"); \
+ break; \
+ } \
+ __xg_orig; \
+})
+
+#endif
+
+#define tas(ptr) (xchg((ptr), 1))
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_ATOMIC_H */
--- /dev/null
+#ifndef __FRV_AUXVEC_H
+#define __FRV_AUXVEC_H
+
+#endif
--- /dev/null
+/* ax88796.h: access points to the driver for the AX88796 NE2000 clone
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_AX88796_H
+#define _ASM_AX88796_H
+
+#include <asm/mb-regs.h>
+
+#define AX88796_IOADDR (__region_CS1 + 0x200)
+#define AX88796_IRQ IRQ_CPU_EXTERNAL7
+#define AX88796_FULL_DUPLEX 0 /* force full duplex */
+#define AX88796_BUS_INFO "CS1#+0x200" /* bus info for ethtool */
+
+#endif /* _ASM_AX88796_H */
--- /dev/null
+/* bitops.h: bit operations for the Fujitsu FR-V CPUs
+ *
+ * For an explanation of how atomic ops work in this arch, see:
+ * Documentation/frv/atomic-ops.txt
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BITOPS_H
+#define _ASM_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+static inline
+unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v)
+{
+ unsigned long old, tmp;
+
+ asm volatile(
+ "0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " and%I3 %1,%3,%2 \n"
+ " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */
+ " beq icc3,#0,0b \n"
+ : "+U"(*v), "=&r"(old), "=r"(tmp)
+ : "NPr"(~mask)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ return old;
+}
+
+static inline
+unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v)
+{
+ unsigned long old, tmp;
+
+ asm volatile(
+ "0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " or%I3 %1,%3,%2 \n"
+ " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */
+ " beq icc3,#0,0b \n"
+ : "+U"(*v), "=&r"(old), "=r"(tmp)
+ : "NPr"(mask)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ return old;
+}
+
+static inline
+unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v)
+{
+ unsigned long old, tmp;
+
+ asm volatile(
+ "0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " xor%I3 %1,%3,%2 \n"
+ " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */
+ " beq icc3,#0,0b \n"
+ : "+U"(*v), "=&r"(old), "=r"(tmp)
+ : "NPr"(mask)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ return old;
+}
+
+#else
+
+extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v);
+extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v);
+
+#endif
+
+#define atomic_clear_mask(mask, v) atomic_test_and_ANDNOT_mask((mask), (v))
+#define atomic_set_mask(mask, v) atomic_test_and_OR_mask((mask), (v))
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+ volatile unsigned long *ptr = addr;
+ unsigned long mask = 1UL << (nr & 31);
+ ptr += nr >> 5;
+ return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+ volatile unsigned long *ptr = addr;
+ unsigned long mask = 1UL << (nr & 31);
+ ptr += nr >> 5;
+ return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+ volatile unsigned long *ptr = addr;
+ unsigned long mask = 1UL << (nr & 31);
+ ptr += nr >> 5;
+ return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+ test_and_clear_bit(nr, addr);
+}
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+ test_and_set_bit(nr, addr);
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+ test_and_change_bit(nr, addr);
+}
+
+static inline void __clear_bit(int nr, volatile void * addr)
+{
+ volatile unsigned long *a = addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 31);
+ *a &= ~mask;
+}
+
+static inline void __set_bit(int nr, volatile void * addr)
+{
+ volatile unsigned long *a = addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 31);
+ *a |= mask;
+}
+
+static inline void __change_bit(int nr, volatile void *addr)
+{
+ volatile unsigned long *a = addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 31);
+ *a ^= mask;
+}
+
+static inline int __test_and_clear_bit(int nr, volatile void * addr)
+{
+ volatile unsigned long *a = addr;
+ int mask, retval;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 31);
+ retval = (mask & *a) != 0;
+ *a &= ~mask;
+ return retval;
+}
+
+static inline int __test_and_set_bit(int nr, volatile void * addr)
+{
+ volatile unsigned long *a = addr;
+ int mask, retval;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 31);
+ retval = (mask & *a) != 0;
+ *a |= mask;
+ return retval;
+}
+
+static inline int __test_and_change_bit(int nr, volatile void * addr)
+{
+ volatile unsigned long *a = addr;
+ int mask, retval;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 31);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+ return retval;
+}
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static inline int __constant_test_bit(int nr, const volatile void * addr)
+{
+ return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static inline int __test_bit(int nr, const volatile void * addr)
+{
+ int * a = (int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+#define fls(x) \
+({ \
+ int bit; \
+ \
+ asm(" subcc %1,gr0,gr0,icc0 \n" \
+ " ckne icc0,cc4 \n" \
+ " cscan.p %1,gr0,%0 ,cc4,#1 \n" \
+ " csub %0,%0,%0 ,cc4,#0 \n" \
+ " csub %2,%0,%0 ,cc4,#1 \n" \
+ : "=&r"(bit) \
+ : "r"(x), "r"(32) \
+ : "icc0", "cc4" \
+ ); \
+ \
+ bit; \
+})
+
+/**
+ * fls64 - find last bit set in a 64-bit value
+ * @n: the value to search
+ *
+ * This is defined the same way as ffs:
+ * - return 64..1 to indicate bit 63..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls64(u64 n)
+{
+ union {
+ u64 ll;
+ struct { u32 h, l; };
+ } _;
+ int bit, x, y;
+
+ _.ll = n;
+
+ asm(" subcc.p %3,gr0,gr0,icc0 \n"
+ " subcc %4,gr0,gr0,icc1 \n"
+ " ckne icc0,cc4 \n"
+ " ckne icc1,cc5 \n"
+ " norcr cc4,cc5,cc6 \n"
+ " csub.p %0,%0,%0 ,cc6,1 \n"
+ " orcr cc5,cc4,cc4 \n"
+ " andcr cc4,cc5,cc4 \n"
+ " cscan.p %3,gr0,%0 ,cc4,0 \n"
+ " setlos #64,%1 \n"
+ " cscan.p %4,gr0,%0 ,cc4,1 \n"
+ " setlos #32,%2 \n"
+ " csub.p %1,%0,%0 ,cc4,0 \n"
+ " csub %2,%0,%0 ,cc4,1 \n"
+ : "=&r"(bit), "=r"(x), "=r"(y)
+ : "0r"(_.h), "r"(_.l)
+ : "icc0", "icc1", "cc4", "cc5", "cc6"
+ );
+ return bit;
+
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+ /* Note: (x & -x) gives us a mask that is the least significant
+ * (rightmost) 1-bit of the value in x.
+ */
+ return fls(x & -x);
+}
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+int __ffs(unsigned long x)
+{
+ int bit;
+ asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x));
+ return 31 - bit;
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+ unsigned long bit;
+ asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word));
+ return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U32
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ int bit;
+ asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n));
+ return 31 - bit;
+}
+
+/*
+ * special slimline version of fls64() for calculating ilog2_u64()
+ * - note: no protection against n == 0
+ */
+#define ARCH_HAS_ILOG2_U64
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+ union {
+ u64 ll;
+ struct { u32 h, l; };
+ } _;
+ int bit, x, y;
+
+ _.ll = n;
+
+ asm(" subcc %3,gr0,gr0,icc0 \n"
+ " ckeq icc0,cc4 \n"
+ " cscan.p %3,gr0,%0 ,cc4,0 \n"
+ " setlos #63,%1 \n"
+ " cscan.p %4,gr0,%0 ,cc4,1 \n"
+ " setlos #31,%2 \n"
+ " csub.p %1,%0,%0 ,cc4,0 \n"
+ " csub %2,%0,%0 ,cc4,1 \n"
+ : "=&r"(bit), "=r"(x), "=r"(y)
+ : "0r"(_.h), "r"(_.l)
+ : "icc0", "cc4"
+ );
+ return bit;
+}
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit ((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BITOPS_H */
--- /dev/null
+/* bug.h: FRV bug trapping
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+#include <linux/linkage.h>
+
+#ifdef CONFIG_BUG
+/*
+ * Tell the user there is some problem.
+ */
+extern asmlinkage void __debug_bug_trap(int signr);
+
+#ifdef CONFIG_NO_KERNEL_MSG
+#define _debug_bug_printk()
+#else
+extern void __debug_bug_printk(const char *file, unsigned line);
+#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__)
+#endif
+
+#define _debug_bug_trap(signr) \
+do { \
+ __debug_bug_trap(signr); \
+ asm volatile("nop"); \
+} while(1)
+
+#define HAVE_ARCH_BUG
+#define BUG() \
+do { \
+ _debug_bug_printk(); \
+ _debug_bug_trap(6 /*SIGABRT*/); \
+} while (0)
+
+#ifdef CONFIG_GDBSTUB
+#define HAVE_ARCH_KGDB_RAISE
+#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0)
+
+#define HAVE_ARCH_KGDB_BAD_PAGE
+#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
+#endif
+
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif
--- /dev/null
+/* bugs.h: arch bug checking entry
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void check_bugs(void)
+{
+}
--- /dev/null
+/* busctl-regs.h: FR400-series CPU bus controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+/* bus controller registers */
+#define __get_LGCR() ({ *(volatile unsigned long *)(0xfe000010); })
+#define __get_LMAICR() ({ *(volatile unsigned long *)(0xfe000030); })
+#define __get_LEMBR() ({ *(volatile unsigned long *)(0xfe000040); })
+#define __get_LEMAM() ({ *(volatile unsigned long *)(0xfe000048); })
+#define __get_LCR(R) ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); })
+#define __get_LSBR(R) ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); })
+#define __get_LSAM(R) ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); })
+
+#define __set_LGCR(V) do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0)
+#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0)
+#define __set_LEMBR(V) do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0)
+#define __set_LEMAM(V) do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0)
+#define __set_LCR(R,V) do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0)
+#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0)
+#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0)
+
+/* FR401 SDRAM controller registers */
+#define __get_DBR(R) ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); })
+#define __get_DAM(R) ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); })
+
+/* FR551 SDRAM controller registers */
+#define __get_DARS(R) ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); })
+#define __get_DAMK(R) ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); })
+
+
+#endif /* _ASM_BUSCTL_REGS_H */
--- /dev/null
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
--- /dev/null
+/* cache.h: FRV cache definitions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_CACHE_H
+#define __ASM_CACHE_H
+
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT)
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES)))
+#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES)))
+
+#endif
--- /dev/null
+/* cacheflush.h: FRV cache flushing routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache management (our cache is physically indexed)
+ */
+#define flush_cache_all() do {} while(0)
+#define flush_cache_mm(mm) do {} while(0)
+#define flush_cache_dup_mm(mm) do {} while(0)
+#define flush_cache_range(mm, start, end) do {} while(0)
+#define flush_cache_page(vma, vmaddr, pfn) do {} while(0)
+#define flush_cache_vmap(start, end) do {} while(0)
+#define flush_cache_vunmap(start, end) do {} while(0)
+#define flush_dcache_mmap_lock(mapping) do {} while(0)
+#define flush_dcache_mmap_unlock(mapping) do {} while(0)
+
+/*
+ * physically-indexed cache management
+ * - see arch/frv/lib/cache.S
+ */
+extern void frv_dcache_writeback(unsigned long start, unsigned long size);
+extern void frv_cache_invalidate(unsigned long start, unsigned long size);
+extern void frv_icache_invalidate(unsigned long start, unsigned long size);
+extern void frv_cache_wback_inv(unsigned long start, unsigned long size);
+
+static inline void __flush_cache_all(void)
+{
+ asm volatile(" dcef @(gr0,gr0),#1 \n"
+ " icei @(gr0,gr0),#1 \n"
+ " membar \n"
+ : : : "memory"
+ );
+}
+
+/* dcache/icache coherency... */
+#ifdef CONFIG_MMU
+extern void flush_dcache_page(struct page *page);
+#else
+static inline void flush_dcache_page(struct page *page)
+{
+ unsigned long addr = page_to_phys(page);
+ frv_dcache_writeback(addr, addr + PAGE_SIZE);
+}
+#endif
+
+static inline void flush_page_to_ram(struct page *page)
+{
+ flush_dcache_page(page);
+}
+
+static inline void flush_icache(void)
+{
+ __flush_cache_all();
+}
+
+static inline void flush_icache_range(unsigned long start, unsigned long end)
+{
+ frv_cache_wback_inv(start, end);
+}
+
+#ifdef CONFIG_MMU
+extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ unsigned long start, unsigned long len);
+#else
+static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+ unsigned long start, unsigned long len)
+{
+ frv_cache_wback_inv(start, start + len);
+}
+#endif
+
+static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE);
+}
+
+/*
+ * permit ptrace to access another process's address space through the icache
+ * and the dcache
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+ memcpy((dst), (src), (len)); \
+ flush_icache_user_range((vma), (page), (vaddr), (len)); \
+} while(0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy((dst), (src), (len))
+
+#endif /* _ASM_CACHEFLUSH_H */
--- /dev/null
+/* checksum.h: FRV checksumming
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ *
+ */
+static inline
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ unsigned int tmp, inc, sum = 0;
+
+ asm(" addcc gr0,gr0,gr0,icc0\n" /* clear icc0.C */
+ " subi %1,#4,%1 \n"
+ "0: \n"
+ " ldu.p @(%1,%3),%4 \n"
+ " subicc %2,#1,%2,icc1 \n"
+ " addxcc.p %4,%0,%0,icc0 \n"
+ " bhi icc1,#2,0b \n"
+
+ /* fold the 33-bit result into 16-bits */
+ " addxcc gr0,%0,%0,icc0 \n"
+ " srli %0,#16,%1 \n"
+ " sethi #0,%0 \n"
+ " add %1,%0,%0 \n"
+ " srli %0,#16,%1 \n"
+ " add %1,%0,%0 \n"
+
+ : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
+ : "0" (sum), "1" (iph), "2" (ihl), "3" (4),
+ "m"(*(volatile struct { int _[100]; } *)iph)
+ : "icc0", "icc1", "memory"
+ );
+
+ return (__force __sum16)~sum;
+}
+
+/*
+ * Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned int tmp;
+
+ asm(" srli %0,#16,%1 \n"
+ " sethi #0,%0 \n"
+ " add %1,%0,%0 \n"
+ " srli %0,#16,%1 \n"
+ " add %1,%0,%0 \n"
+ : "=r"(sum), "=&r"(tmp)
+ : "0"(sum)
+ );
+
+ return (__force __sum16)~sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ asm(" addcc %1,%0,%0,icc0 \n"
+ " addxcc %2,%0,%0,icc0 \n"
+ " addxcc %3,%0,%0,icc0 \n"
+ " addxcc gr0,%0,%0,icc0 \n"
+ : "=r" (sum)
+ : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum)
+ : "icc0"
+ );
+ return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+ __u32 len, unsigned short proto, __wsum sum)
+{
+ unsigned long tmp, tmp2;
+
+ asm(" addcc %2,%0,%0,icc0 \n"
+
+ /* add up the source addr */
+ " ldi @(%3,0),%1 \n"
+ " addxcc %1,%0,%0,icc0 \n"
+ " ldi @(%3,4),%2 \n"
+ " addxcc %2,%0,%0,icc0 \n"
+ " ldi @(%3,8),%1 \n"
+ " addxcc %1,%0,%0,icc0 \n"
+ " ldi @(%3,12),%2 \n"
+ " addxcc %2,%0,%0,icc0 \n"
+
+ /* add up the dest addr */
+ " ldi @(%4,0),%1 \n"
+ " addxcc %1,%0,%0,icc0 \n"
+ " ldi @(%4,4),%2 \n"
+ " addxcc %2,%0,%0,icc0 \n"
+ " ldi @(%4,8),%1 \n"
+ " addxcc %1,%0,%0,icc0 \n"
+ " ldi @(%4,12),%2 \n"
+ " addxcc %2,%0,%0,icc0 \n"
+
+ /* fold the 33-bit result into 16-bits */
+ " addxcc gr0,%0,%0,icc0 \n"
+ " srli %0,#16,%1 \n"
+ " sethi #0,%0 \n"
+ " add %1,%0,%0 \n"
+ " srli %0,#16,%1 \n"
+ " add %1,%0,%0 \n"
+
+ : "=r" (sum), "=&r" (tmp), "=r" (tmp2)
+ : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto)
+ : "icc0"
+ );
+
+ return (__force __sum16)~sum;
+}
+
+#endif /* _ASM_CHECKSUM_H */
--- /dev/null
+/* cpu-irqs.h: on-CPU peripheral irqs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CPU_IRQS_H
+#define _ASM_CPU_IRQS_H
+
+#ifndef __ASSEMBLY__
+
+/* IRQ to level mappings */
+#define IRQ_GDBSTUB_LEVEL 15
+#define IRQ_UART_LEVEL 13
+
+#ifdef CONFIG_GDBSTUB_UART0
+#define IRQ_UART0_LEVEL IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART0_LEVEL IRQ_UART_LEVEL
+#endif
+
+#ifdef CONFIG_GDBSTUB_UART1
+#define IRQ_UART1_LEVEL IRQ_GDBSTUB_LEVEL
+#else
+#define IRQ_UART1_LEVEL IRQ_UART_LEVEL
+#endif
+
+#define IRQ_DMA0_LEVEL 14
+#define IRQ_DMA1_LEVEL 14
+#define IRQ_DMA2_LEVEL 14
+#define IRQ_DMA3_LEVEL 14
+#define IRQ_DMA4_LEVEL 14
+#define IRQ_DMA5_LEVEL 14
+#define IRQ_DMA6_LEVEL 14
+#define IRQ_DMA7_LEVEL 14
+
+#define IRQ_TIMER0_LEVEL 12
+#define IRQ_TIMER1_LEVEL 11
+#define IRQ_TIMER2_LEVEL 10
+
+#define IRQ_XIRQ0_LEVEL 1
+#define IRQ_XIRQ1_LEVEL 2
+#define IRQ_XIRQ2_LEVEL 3
+#define IRQ_XIRQ3_LEVEL 4
+#define IRQ_XIRQ4_LEVEL 5
+#define IRQ_XIRQ5_LEVEL 6
+#define IRQ_XIRQ6_LEVEL 7
+#define IRQ_XIRQ7_LEVEL 8
+
+/* IRQ IDs presented to drivers */
+#define IRQ_CPU__UNUSED IRQ_BASE_CPU
+#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL)
+#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL)
+#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL)
+#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL)
+#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL)
+#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL)
+#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL)
+#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL)
+#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL)
+#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL)
+#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL)
+#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL)
+#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL)
+#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL)
+#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL)
+#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL)
+#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL)
+#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL)
+#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL)
+#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL)
+#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_CPU_IRQS_H */
--- /dev/null
+#ifndef _ASM_CPUMASK_H
+#define _ASM_CPUMASK_H
+
+#include <asm-generic/cpumask.h>
+
+#endif /* _ASM_CPUMASK_H */
--- /dev/null
+#ifndef _ASM_CPUTIME_H
+#define _ASM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* _ASM_CPUTIME_H */
--- /dev/null
+/* current.h: FRV current task pointer
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * dedicate GR29 to keeping the current task pointer
+ */
+register struct task_struct *current asm("gr29");
+
+#define get_current() current
+
+#else
+
+#define CURRENT gr29
+
+#endif
+
+#endif /* _ASM_CURRENT_H */
--- /dev/null
+/* delay.h: FRV delay code
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+#include <asm/param.h>
+#include <asm/timer-regs.h>
+
+/*
+ * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop]
+ */
+extern unsigned long __delay_loops_MHz;
+
+static inline void __delay(unsigned long loops)
+{
+ asm volatile("1: subicc %0,#1,%0,icc0 \n"
+ " bnc icc0,#2,1b \n"
+ : "=r" (loops)
+ : "0" (loops)
+ : "icc0"
+ );
+}
+
+/*
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+extern unsigned long loops_per_jiffy;
+
+static inline void udelay(unsigned long usecs)
+{
+ __delay(usecs * __delay_loops_MHz);
+}
+
+#define ndelay(n) udelay((n) * 5)
+
+#endif /* _ASM_DELAY_H */
--- /dev/null
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
--- /dev/null
+#include <asm-generic/div64.h>
--- /dev/null
+/* dm9000.h: Davicom DM9000 adapter configuration
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DM9000_H
+#define _ASM_DM9000_H
+
+#include <asm/mb-regs.h>
+
+#define DM9000_ARCH_IOBASE (__region_CS6 + 0x300)
+#define DM9000_ARCH_IRQ IRQ_CPU_EXTERNAL3 /* XIRQ #3 (shared with FPGA) */
+#undef DM9000_ARCH_IRQ_ACTLOW /* IRQ pin active high */
+#define DM9000_ARCH_BUS_INFO "CS6#+0x300" /* bus info for ethtool */
+
+#undef __is_PCI_IO
+#define __is_PCI_IO(addr) 0 /* not PCI */
+
+#undef inl
+#define inl(addr) \
+({ \
+ unsigned long __ioaddr = (unsigned long) addr; \
+ uint32_t x = readl(__ioaddr); \
+ ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff); \
+})
+
+#undef insl
+#define insl(a,b,l) __insl(a,b,l,0) /* don't byte-swap */
+
+
+#endif /* _ASM_DM9000_H */
--- /dev/null
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/device.h>
+#include <asm/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern unsigned long __nongprelbss dma_coherent_mem_start;
+extern unsigned long __nongprelbss dma_coherent_mem_end;
+
+void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction);
+
+/*
+ * Unmap a single streaming mode DMA translation. The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call. All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA. This is the scather-gather version of the
+ * above pci_map_single interface. Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ * DMA address/length pairs than there are SG table elements.
+ * (for example via virtual mapping capabilities)
+ * The routine returns the number of addr/length pairs actually
+ * used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+extern
+dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
+ size_t size, enum dma_data_direction direction);
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ flush_write_buffers();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ flush_write_buffers();
+}
+
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ flush_write_buffers();
+}
+
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s,
+ * so we can't guarantee allocations that must be
+ * within a tighter range than GFP_DMA..
+ */
+ if (mask < 0x00ffffff)
+ return 0;
+
+ return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+ return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d, h) (1)
+
+static inline
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ flush_write_buffers();
+}
+
+#endif /* _ASM_DMA_MAPPING_H */
--- /dev/null
+/* dma.h: FRV DMA controller management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+//#define DMA_DEBUG 1
+
+#include <linux/interrupt.h>
+
+#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */
+
+/* under 2.4 this is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/*
+ * FRV DMA controller management
+ */
+typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data);
+
+extern void frv_dma_init(void);
+
+extern int frv_dma_open(const char *devname,
+ unsigned long dmamask,
+ int dmacap,
+ dma_irq_handler_t handler,
+ unsigned long irq_flags,
+ void *data);
+
+/* channels required */
+#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */
+
+/* capabilities required */
+#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */
+#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */
+#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */
+
+extern void frv_dma_close(int dma);
+
+extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr);
+
+extern void frv_dma_start(int dma,
+ unsigned long sba, unsigned long dba,
+ unsigned long pix, unsigned long six, unsigned long bcl);
+
+extern void frv_dma_restart_circular(int dma, unsigned long six);
+
+extern void frv_dma_stop(int dma);
+
+extern int is_frv_dma_interrupting(int dma);
+
+extern void frv_dma_dump(int dma);
+
+extern void frv_dma_status_clear(int dma);
+
+#define FRV_DMA_NCHANS 8
+#define FRV_DMA_4CHANS 4
+#define FRV_DMA_8CHANS 8
+
+#define DMAC_CCFRx 0x00 /* channel configuration reg */
+#define DMAC_CCFRx_CM_SHIFT 16
+#define DMAC_CCFRx_CM_DA 0x00000000
+#define DMAC_CCFRx_CM_SCA 0x00010000
+#define DMAC_CCFRx_CM_DCA 0x00020000
+#define DMAC_CCFRx_CM_2D 0x00030000
+#define DMAC_CCFRx_ATS_SHIFT 8
+#define DMAC_CCFRx_RS_INTERN 0x00000000
+#define DMAC_CCFRx_RS_EXTERN 0x00000001
+#define DMAC_CCFRx_RS_SHIFT 0
+
+#define DMAC_CSTRx 0x08 /* channel status reg */
+#define DMAC_CSTRx_FS 0x0000003f
+#define DMAC_CSTRx_NE 0x00000100
+#define DMAC_CSTRx_FED 0x00000200
+#define DMAC_CSTRx_WER 0x00000800
+#define DMAC_CSTRx_RER 0x00001000
+#define DMAC_CSTRx_CE 0x00002000
+#define DMAC_CSTRx_INT 0x00800000
+#define DMAC_CSTRx_BUSY 0x80000000
+
+#define DMAC_CCTRx 0x10 /* channel control reg */
+#define DMAC_CCTRx_DSIZ_1 0x00000000
+#define DMAC_CCTRx_DSIZ_2 0x00000001
+#define DMAC_CCTRx_DSIZ_4 0x00000002
+#define DMAC_CCTRx_DSIZ_32 0x00000005
+#define DMAC_CCTRx_DAU_HOLD 0x00000000
+#define DMAC_CCTRx_DAU_INC 0x00000010
+#define DMAC_CCTRx_DAU_DEC 0x00000020
+#define DMAC_CCTRx_SSIZ_1 0x00000000
+#define DMAC_CCTRx_SSIZ_2 0x00000100
+#define DMAC_CCTRx_SSIZ_4 0x00000200
+#define DMAC_CCTRx_SSIZ_32 0x00000500
+#define DMAC_CCTRx_SAU_HOLD 0x00000000
+#define DMAC_CCTRx_SAU_INC 0x00001000
+#define DMAC_CCTRx_SAU_DEC 0x00002000
+#define DMAC_CCTRx_FC 0x08000000
+#define DMAC_CCTRx_ICE 0x10000000
+#define DMAC_CCTRx_IE 0x40000000
+#define DMAC_CCTRx_ACT 0x80000000
+
+#define DMAC_SBAx 0x18 /* source base address reg */
+#define DMAC_DBAx 0x20 /* data base address reg */
+#define DMAC_PIXx 0x28 /* primary index reg */
+#define DMAC_SIXx 0x30 /* secondary index reg */
+#define DMAC_BCLx 0x38 /* byte count limit reg */
+#define DMAC_APRx 0x40 /* alternate pointer reg */
+
+/*
+ * required for PCI + MODULES
+ */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */
--- /dev/null
+/* elf.h: FR-V ELF definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68knommu/elf.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_ELF_H
+#define __ASM_ELF_H
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+struct elf32_hdr;
+
+/*
+ * ELF header e_flags defines.
+ */
+#define EF_FRV_GPR_MASK 0x00000003 /* mask for # of gprs */
+#define EF_FRV_GPR32 0x00000001 /* Only uses GR on 32-register */
+#define EF_FRV_GPR64 0x00000002 /* Only uses GR on 64-register */
+#define EF_FRV_FPR_MASK 0x0000000c /* mask for # of fprs */
+#define EF_FRV_FPR32 0x00000004 /* Only uses FR on 32-register */
+#define EF_FRV_FPR64 0x00000008 /* Only uses FR on 64-register */
+#define EF_FRV_FPR_NONE 0x0000000C /* Uses software floating-point */
+#define EF_FRV_DWORD_MASK 0x00000030 /* mask for dword support */
+#define EF_FRV_DWORD_YES 0x00000010 /* Assumes stack aligned to 8-byte boundaries. */
+#define EF_FRV_DWORD_NO 0x00000020 /* Assumes stack aligned to 4-byte boundaries. */
+#define EF_FRV_DOUBLE 0x00000040 /* Uses double instructions. */
+#define EF_FRV_MEDIA 0x00000080 /* Uses media instructions. */
+#define EF_FRV_PIC 0x00000100 /* Uses position independent code. */
+#define EF_FRV_NON_PIC_RELOCS 0x00000200 /* Does not use position Independent code. */
+#define EF_FRV_MULADD 0x00000400 /* -mmuladd */
+#define EF_FRV_BIGPIC 0x00000800 /* -fPIC */
+#define EF_FRV_LIBPIC 0x00001000 /* -mlibrary-pic */
+#define EF_FRV_G0 0x00002000 /* -G 0, no small data ptr */
+#define EF_FRV_NOPACK 0x00004000 /* -mnopack */
+#define EF_FRV_FDPIC 0x00008000 /* -mfdpic */
+#define EF_FRV_CPU_MASK 0xff000000 /* specific cpu bits */
+#define EF_FRV_CPU_GENERIC 0x00000000 /* Set CPU type is FR-V */
+#define EF_FRV_CPU_FR500 0x01000000 /* Set CPU type is FR500 */
+#define EF_FRV_CPU_FR300 0x02000000 /* Set CPU type is FR300 */
+#define EF_FRV_CPU_SIMPLE 0x03000000 /* SIMPLE */
+#define EF_FRV_CPU_TOMCAT 0x04000000 /* Tomcat, FR500 prototype */
+#define EF_FRV_CPU_FR400 0x05000000 /* Set CPU type is FR400 */
+#define EF_FRV_CPU_FR550 0x06000000 /* Set CPU type is FR550 */
+#define EF_FRV_CPU_FR405 0x07000000 /* Set CPU type is FR405 */
+#define EF_FRV_CPU_FR450 0x08000000 /* Set CPU type is FR450 */
+
+/*
+ * FR-V ELF relocation types
+ */
+
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpmedia_regs elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+extern int elf_check_arch(const struct elf32_hdr *hdr);
+
+#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS))
+#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2MSB
+#define ELF_ARCH EM_FRV
+
+#define ELF_PLAT_INIT(_r) \
+do { \
+ __kernel_frame0_ptr->gr16 = 0; \
+ __kernel_frame0_ptr->gr17 = 0; \
+ __kernel_frame0_ptr->gr18 = 0; \
+ __kernel_frame0_ptr->gr19 = 0; \
+ __kernel_frame0_ptr->gr20 = 0; \
+ __kernel_frame0_ptr->gr21 = 0; \
+ __kernel_frame0_ptr->gr22 = 0; \
+ __kernel_frame0_ptr->gr23 = 0; \
+ __kernel_frame0_ptr->gr24 = 0; \
+ __kernel_frame0_ptr->gr25 = 0; \
+ __kernel_frame0_ptr->gr26 = 0; \
+ __kernel_frame0_ptr->gr27 = 0; \
+ __kernel_frame0_ptr->gr29 = 0; \
+} while(0)
+
+#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \
+do { \
+ __kernel_frame0_ptr->gr16 = _exec_map_addr; \
+ __kernel_frame0_ptr->gr17 = _interp_map_addr; \
+ __kernel_frame0_ptr->gr18 = _dynamic_addr; \
+ __kernel_frame0_ptr->gr19 = 0; \
+ __kernel_frame0_ptr->gr20 = 0; \
+ __kernel_frame0_ptr->gr21 = 0; \
+ __kernel_frame0_ptr->gr22 = 0; \
+ __kernel_frame0_ptr->gr23 = 0; \
+ __kernel_frame0_ptr->gr24 = 0; \
+ __kernel_frame0_ptr->gr25 = 0; \
+ __kernel_frame0_ptr->gr26 = 0; \
+ __kernel_frame0_ptr->gr27 = 0; \
+ __kernel_frame0_ptr->gr29 = 0; \
+} while(0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC
+#define ELF_EXEC_PAGESIZE 16384
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0x08000000UL
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
--- /dev/null
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
--- /dev/null
+#ifndef _ASM_ERRNO_H
+#define _ASM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_ERRNO_H */
+
--- /dev/null
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H_ */
--- /dev/null
+#include <asm-generic/fcntl.h>
--- /dev/null
+#ifndef __ASM_FPU_H
+#define __ASM_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0)
+
+#endif /* __ASM_FPU_H */
--- /dev/null
+/* empty */
--- /dev/null
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/uaccess.h>
+
+extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr);
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ return -ENOSYS;
+}
+
+#endif
+#endif
--- /dev/null
+/* gdb-stub.h: FRV GDB stub
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_GDB_STUB_H
+#define __ASM_GDB_STUB_H
+
+#undef GDBSTUB_DEBUG_PROTOCOL
+
+#include <asm/ptrace.h>
+
+/*
+ * important register numbers in GDB protocol
+ * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7,
+ * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15,
+ * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23,
+ * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31,
+ * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39,
+ * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47,
+ * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55,
+ * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63,
+ * - FR0, FR1, FR2, FR3, FR4, FR5, FR6, FR7,
+ * - FR8, FR9, FR10, FR11, FR12, FR13, FR14, FR15,
+ * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23,
+ * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31,
+ * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39,
+ * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47,
+ * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55,
+ * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63,
+ * - PC, PSR, CCR, CCCR,
+ * - _X132, _X133, _X134
+ * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3,
+ * - SCR0, SCR1, SCR2, SCR3,
+ * - LR, LCR,
+ * - IACC0H, IACC0L,
+ * - FSR0,
+ * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7,
+ * - ACCG0123, ACCG4567,
+ * - MSR0, MSR1,
+ * - GNER0, GNER1,
+ * - FNER0, FNER1,
+ */
+#define GDB_REG_GR(N) (N)
+#define GDB_REG_FR(N) (64+(N))
+#define GDB_REG_PC 128
+#define GDB_REG_PSR 129
+#define GDB_REG_CCR 130
+#define GDB_REG_CCCR 131
+#define GDB_REG_TBR 135
+#define GDB_REG_BRR 136
+#define GDB_REG_DBAR(N) (137+(N))
+#define GDB_REG_SCR(N) (141+(N))
+#define GDB_REG_LR 145
+#define GDB_REG_LCR 146
+#define GDB_REG_FSR0 149
+#define GDB_REG_ACC(N) (150+(N))
+#define GDB_REG_ACCG(N) (158+(N)/4)
+#define GDB_REG_MSR(N) (160+(N))
+#define GDB_REG_GNER(N) (162+(N))
+#define GDB_REG_FNER(N) (164+(N))
+
+#define GDB_REG_SP GDB_REG_GR(1)
+#define GDB_REG_FP GDB_REG_GR(2)
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern void gdbstub_init(void);
+extern void gdbstub(int type);
+extern void gdbstub_exit(int status);
+
+extern void gdbstub_io_init(void);
+extern void gdbstub_set_baud(unsigned baud);
+extern int gdbstub_rx_char(unsigned char *_ch, int nonblock);
+extern void gdbstub_tx_char(unsigned char ch);
+extern void gdbstub_tx_flush(void);
+extern void gdbstub_do_rx(void);
+
+extern asmlinkage void __debug_stub_init_break(void);
+extern asmlinkage void __break_hijack_kernel_event(void);
+extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
+extern asmlinkage void start_kernel(void);
+
+extern asmlinkage void gdbstub_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(void);
+extern asmlinkage void gdbstub_intercept(void);
+
+extern uint32_t __entry_usertrap_table[];
+extern uint32_t __entry_kerneltrap_table[];
+
+extern volatile u8 gdbstub_rx_buffer[PAGE_SIZE];
+extern volatile u32 gdbstub_rx_inp;
+extern volatile u32 gdbstub_rx_outp;
+extern volatile u8 gdbstub_rx_overflow;
+extern u8 gdbstub_rx_unget;
+
+extern void gdbstub_printk(const char *fmt, ...);
+extern void debug_to_serial(const char *p, int n);
+extern void console_set_baud(unsigned baud);
+
+#ifdef GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT,...) ({ 0; })
+#endif
+
+/*
+ * we dedicate GR31 to keeping a pointer to the gdbstub exception frame
+ * - gr31 is destroyed on entry to the gdbstub if !MMU
+ * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU
+ */
+register struct frv_frame0 *__debug_frame0 asm("gr31");
+
+#define __debug_frame (&__debug_frame0->regs)
+#define __debug_user_context (&__debug_frame0->uc)
+#define __debug_regs (&__debug_frame0->debug)
+#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X)))
+
+struct frv_debug_status {
+ unsigned long bpsr;
+ unsigned long dcr;
+ unsigned long brr;
+ unsigned long nmar;
+};
+
+extern struct frv_debug_status __debug_status;
+
+#endif /* _LANGUAGE_ASSEMBLY */
+#endif /* __ASM_GDB_STUB_H */
--- /dev/null
+/* gpio-regs.h: on-chip general purpose I/O registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_GPIO_REGS
+#define _ASM_GPIO_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_PDR() ({ __reg(0xfeff0400); })
+#define __set_PDR(V) do { __reg(0xfeff0400) = (V); mb(); } while(0)
+
+#define __get_GPDR() ({ __reg(0xfeff0408); })
+#define __set_GPDR(V) do { __reg(0xfeff0408) = (V); mb(); } while(0)
+
+#define __get_SIR() ({ __reg(0xfeff0410); })
+#define __set_SIR(V) do { __reg(0xfeff0410) = (V); mb(); } while(0)
+
+#define __get_SOR() ({ __reg(0xfeff0418); })
+#define __set_SOR(V) do { __reg(0xfeff0418) = (V); mb(); } while(0)
+
+#define __set_PDSR(V) do { __reg(0xfeff0420) = (V); mb(); } while(0)
+
+#define __set_PDCR(V) do { __reg(0xfeff0428) = (V); mb(); } while(0)
+
+#define __get_RSTR() ({ __reg(0xfeff0500); })
+#define __set_RSTR(V) do { __reg(0xfeff0500) = (V); mb(); } while(0)
+
+
+
+/* PDR definitions */
+#define PDR_GPIO_DATA(X) (1 << (X))
+
+/* GPDR definitions */
+#define GPDR_INPUT 0
+#define GPDR_OUTPUT 1
+#define GPDR_DREQ0_BIT 0x00001000
+#define GPDR_DREQ1_BIT 0x00008000
+#define GPDR_DREQ2_BIT 0x00040000
+#define GPDR_DREQ3_BIT 0x00080000
+#define GPDR_DREQ4_BIT 0x00004000
+#define GPDR_DREQ5_BIT 0x00020000
+#define GPDR_DREQ6_BIT 0x00100000
+#define GPDR_DREQ7_BIT 0x00200000
+#define GPDR_DACK0_BIT 0x00002000
+#define GPDR_DACK1_BIT 0x00010000
+#define GPDR_DACK2_BIT 0x00100000
+#define GPDR_DACK3_BIT 0x00200000
+#define GPDR_DONE0_BIT 0x00004000
+#define GPDR_DONE1_BIT 0x00020000
+#define GPDR_GPIO_DIR(X,D) ((D) << (X))
+
+/* SIR definitions */
+#define SIR_GPIO_INPUT 0
+#define SIR_DREQ7_INPUT 0x00200000
+#define SIR_DREQ6_INPUT 0x00100000
+#define SIR_DREQ3_INPUT 0x00080000
+#define SIR_DREQ2_INPUT 0x00040000
+#define SIR_DREQ5_INPUT 0x00020000
+#define SIR_DREQ1_INPUT 0x00008000
+#define SIR_DREQ4_INPUT 0x00004000
+#define SIR_DREQ0_INPUT 0x00001000
+#define SIR_RXD1_INPUT 0x00000400
+#define SIR_CTS0_INPUT 0x00000100
+#define SIR_RXD0_INPUT 0x00000040
+#define SIR_GATE1_INPUT 0x00000020
+#define SIR_GATE0_INPUT 0x00000010
+#define SIR_IRQ3_INPUT 0x00000008
+#define SIR_IRQ2_INPUT 0x00000004
+#define SIR_IRQ1_INPUT 0x00000002
+#define SIR_IRQ0_INPUT 0x00000001
+#define SIR_DREQ_BITS (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \
+ SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \
+ SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \
+ SIR_DREQ6_INPUT | SIR_DREQ7_INPUT)
+
+/* SOR definitions */
+#define SOR_GPIO_OUTPUT 0
+#define SOR_DACK3_OUTPUT 0x00200000
+#define SOR_DACK2_OUTPUT 0x00100000
+#define SOR_DONE1_OUTPUT 0x00020000
+#define SOR_DACK1_OUTPUT 0x00010000
+#define SOR_DONE0_OUTPUT 0x00004000
+#define SOR_DACK0_OUTPUT 0x00002000
+#define SOR_TXD1_OUTPUT 0x00000800
+#define SOR_RTS0_OUTPUT 0x00000200
+#define SOR_TXD0_OUTPUT 0x00000080
+#define SOR_TOUT1_OUTPUT 0x00000020
+#define SOR_TOUT0_OUTPUT 0x00000010
+#define SOR_DONE_BITS (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT)
+#define SOR_DACK_BITS (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \
+ SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT)
+
+/* PDSR definitions */
+#define PDSR_UNCHANGED 0
+#define PDSR_SET_BIT(X) (1 << (X))
+
+/* PDCR definitions */
+#define PDCR_UNCHANGED 0
+#define PDCR_CLEAR_BIT(X) (1 << (X))
+
+/* RSTR definitions */
+/* Read Only */
+#define RSTR_POWERON 0x00000400
+#define RSTR_SOFTRESET_STATUS 0x00000100
+/* Write Only */
+#define RSTR_SOFTRESET 0x00000001
+
+#endif /* _ASM_GPIO_REGS */
--- /dev/null
+/* hardirq.h: FRV hardware IRQ management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+ unsigned long idle_timestamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#ifdef CONFIG_SMP
+#error SMP not available on FR-V
+#endif /* CONFIG_SMP */
+
+extern atomic_t irq_err_count;
+static inline void ack_bad_irq(int irq)
+{
+ atomic_inc(&irq_err_count);
+}
+
+#endif
--- /dev/null
+/* highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * See Documentation/frv/mmu-layout.txt for more information.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <asm/mem-layout.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+
+#define NR_TLB_LINES 64 /* number of lines in the TLB */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+#define HIGHMEM_DEBUG 1
+#else
+#define HIGHMEM_DEBUG 0
+#endif
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+#define kmap_prot PAGE_KERNEL
+#define kmap_pte ______kmap_pte_in_TLB
+extern pte_t *pkmap_page_table;
+
+#define flush_cache_kmaps() do { } while (0)
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP PTRS_PER_PTE
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+extern void *kmap(struct page *page);
+extern void kunmap(struct page *page);
+
+extern struct page *kmap_atomic_to_page(void *ptr);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+#define KMAP_ATOMIC_CACHE_DAMR 8
+
+#ifndef __ASSEMBLY__
+
+#define __kmap_atomic_primary(type, paddr, ampr) \
+({ \
+ unsigned long damlr, dampr; \
+ \
+ dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
+ \
+ if (type != __KM_CACHE) \
+ asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory"); \
+ else \
+ asm volatile("movgs %0,iampr"#ampr"\n" \
+ "movgs %0,dampr"#ampr"\n" \
+ :: "r"(dampr) : "memory" \
+ ); \
+ \
+ asm("movsg damlr"#ampr",%0" : "=r"(damlr)); \
+ \
+ /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/ \
+ \
+ (void *) damlr; \
+})
+
+#define __kmap_atomic_secondary(slot, paddr) \
+({ \
+ unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE; \
+ unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
+ \
+ asm volatile("movgs %0,tplr \n" \
+ "movgs %1,tppr \n" \
+ "tlbpr %0,gr0,#2,#1" \
+ : : "r"(damlr), "r"(dampr) : "memory"); \
+ \
+ /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/ \
+ \
+ (void *) damlr; \
+})
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+ unsigned long paddr;
+
+ pagefault_disable();
+ debug_kmap_atomic(type);
+ paddr = page_to_phys(page);
+
+ switch (type) {
+ case 0: return __kmap_atomic_primary(0, paddr, 2);
+ case 1: return __kmap_atomic_primary(1, paddr, 3);
+ case 2: return __kmap_atomic_primary(2, paddr, 4);
+ case 3: return __kmap_atomic_primary(3, paddr, 5);
+ case 4: return __kmap_atomic_primary(4, paddr, 6);
+ case 5: return __kmap_atomic_primary(5, paddr, 7);
+ case 6: return __kmap_atomic_primary(6, paddr, 8);
+ case 7: return __kmap_atomic_primary(7, paddr, 9);
+ case 8: return __kmap_atomic_primary(8, paddr, 10);
+
+ case 9 ... 9 + NR_TLB_LINES - 1:
+ return __kmap_atomic_secondary(type - 9, paddr);
+
+ default:
+ BUG();
+ return NULL;
+ }
+}
+
+#define __kunmap_atomic_primary(type, ampr) \
+do { \
+ asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory"); \
+ if (type == __KM_CACHE) \
+ asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory"); \
+} while(0)
+
+#define __kunmap_atomic_secondary(slot, vaddr) \
+do { \
+ asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory"); \
+} while(0)
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+ switch (type) {
+ case 0: __kunmap_atomic_primary(0, 2); break;
+ case 1: __kunmap_atomic_primary(1, 3); break;
+ case 2: __kunmap_atomic_primary(2, 4); break;
+ case 3: __kunmap_atomic_primary(3, 5); break;
+ case 4: __kunmap_atomic_primary(4, 6); break;
+ case 5: __kunmap_atomic_primary(5, 7); break;
+ case 6: __kunmap_atomic_primary(6, 8); break;
+ case 7: __kunmap_atomic_primary(7, 9); break;
+ case 8: __kunmap_atomic_primary(8, 10); break;
+
+ case 9 ... 9 + NR_TLB_LINES - 1:
+ __kunmap_atomic_secondary(type - 9, kvaddr);
+ break;
+
+ default:
+ BUG();
+ }
+ pagefault_enable();
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
--- /dev/null
+/* hw_irq.h: FR-V specific h/w IRQ stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+
+#endif /* _ASM_HW_IRQ_H */
--- /dev/null
+/* io.h: FRV I/O operations
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * This gets interesting when talking to the PCI bus - the CPU is in big endian
+ * mode, the PCI bus is little endian and the hardware in the middle can do
+ * byte swapping
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/virtconvert.h>
+#include <asm/string.h>
+#include <asm/mb-regs.h>
+#include <linux/delay.h>
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+
+static inline unsigned short _swapw(unsigned short v)
+{
+ return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned long _swapl(unsigned long v)
+{
+ return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+//#define __iormb() asm volatile("membar")
+//#define __iowmb() asm volatile("membar")
+
+#define __raw_readb __builtin_read8
+#define __raw_readw __builtin_read16
+#define __raw_readl __builtin_read32
+
+#define __raw_writeb(datum, addr) __builtin_write8(addr, datum)
+#define __raw_writew(datum, addr) __builtin_write16(addr, datum)
+#define __raw_writel(datum, addr) __builtin_write32(addr, datum)
+
+static inline void io_outsb(unsigned int addr, const void *buf, int len)
+{
+ unsigned long __ioaddr = (unsigned long) addr;
+ const uint8_t *bp = buf;
+
+ while (len--)
+ __builtin_write8((volatile void __iomem *) __ioaddr, *bp++);
+}
+
+static inline void io_outsw(unsigned int addr, const void *buf, int len)
+{
+ unsigned long __ioaddr = (unsigned long) addr;
+ const uint16_t *bp = buf;
+
+ while (len--)
+ __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++));
+}
+
+extern void __outsl_ns(unsigned int addr, const void *buf, int len);
+extern void __outsl_sw(unsigned int addr, const void *buf, int len);
+static inline void __outsl(unsigned int addr, const void *buf, int len, int swap)
+{
+ unsigned long __ioaddr = (unsigned long) addr;
+
+ if (!swap)
+ __outsl_ns(__ioaddr, buf, len);
+ else
+ __outsl_sw(__ioaddr, buf, len);
+}
+
+static inline void io_insb(unsigned long addr, void *buf, int len)
+{
+ uint8_t *bp = buf;
+
+ while (len--)
+ *bp++ = __builtin_read8((volatile void __iomem *) addr);
+}
+
+static inline void io_insw(unsigned long addr, void *buf, int len)
+{
+ uint16_t *bp = buf;
+
+ while (len--)
+ *bp++ = __builtin_read16((volatile void __iomem *) addr);
+}
+
+extern void __insl_ns(unsigned long addr, void *buf, int len);
+extern void __insl_sw(unsigned long addr, void *buf, int len);
+static inline void __insl(unsigned long addr, void *buf, int len, int swap)
+{
+ if (!swap)
+ __insl_ns(addr, buf, len);
+ else
+ __insl_sw(addr, buf, len);
+}
+
+#define mmiowb() mb()
+
+/*
+ * make the short names macros so specific devices
+ * can override them as required
+ */
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *) addr, val, count);
+}
+
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+ memcpy(dst, (void __force *) src, count);
+}
+
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ memcpy((void __force *) dst, src, count);
+}
+
+static inline uint8_t inb(unsigned long addr)
+{
+ return __builtin_read8((void __iomem *)addr);
+}
+
+static inline uint16_t inw(unsigned long addr)
+{
+ uint16_t ret = __builtin_read16((void __iomem *)addr);
+
+ if (__is_PCI_IO(addr))
+ ret = _swapw(ret);
+
+ return ret;
+}
+
+static inline uint32_t inl(unsigned long addr)
+{
+ uint32_t ret = __builtin_read32((void __iomem *)addr);
+
+ if (__is_PCI_IO(addr))
+ ret = _swapl(ret);
+
+ return ret;
+}
+
+static inline void outb(uint8_t datum, unsigned long addr)
+{
+ __builtin_write8((void __iomem *)addr, datum);
+}
+
+static inline void outw(uint16_t datum, unsigned long addr)
+{
+ if (__is_PCI_IO(addr))
+ datum = _swapw(datum);
+ __builtin_write16((void __iomem *)addr, datum);
+}
+
+static inline void outl(uint32_t datum, unsigned long addr)
+{
+ if (__is_PCI_IO(addr))
+ datum = _swapl(datum);
+ __builtin_write32((void __iomem *)addr, datum);
+}
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) __outsl(a,b,l,0)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) __insl(a,b,l,0)
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline uint8_t readb(const volatile void __iomem *addr)
+{
+ return __builtin_read8((__force void volatile __iomem *) addr);
+}
+
+static inline uint16_t readw(const volatile void __iomem *addr)
+{
+ uint16_t ret = __builtin_read16((__force void volatile __iomem *)addr);
+
+ if (__is_PCI_MEM(addr))
+ ret = _swapw(ret);
+ return ret;
+}
+
+static inline uint32_t readl(const volatile void __iomem *addr)
+{
+ uint32_t ret = __builtin_read32((__force void volatile __iomem *)addr);
+
+ if (__is_PCI_MEM(addr))
+ ret = _swapl(ret);
+
+ return ret;
+}
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(uint8_t datum, volatile void __iomem *addr)
+{
+ __builtin_write8(addr, datum);
+ if (__is_PCI_MEM(addr))
+ __flush_PCI_writes();
+}
+
+static inline void writew(uint16_t datum, volatile void __iomem *addr)
+{
+ if (__is_PCI_MEM(addr))
+ datum = _swapw(datum);
+
+ __builtin_write16(addr, datum);
+ if (__is_PCI_MEM(addr))
+ __flush_PCI_writes();
+}
+
+static inline void writel(uint32_t datum, volatile void __iomem *addr)
+{
+ if (__is_PCI_MEM(addr))
+ datum = _swapl(datum);
+
+ __builtin_write32(addr, datum);
+ if (__is_PCI_MEM(addr))
+ __flush_PCI_writes();
+}
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING 0
+#define IOMAP_NOCACHE_SER 1
+#define IOMAP_NOCACHE_NONSER 2
+#define IOMAP_WRITETHROUGH 3
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define ioremap_wc ioremap_nocache
+
+extern void iounmap(void volatile __iomem *addr);
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+static inline void flush_write_buffers(void)
+{
+ __asm__ __volatile__ ("membar" : : :"memory");
+}
+
+/*
+ * do appropriate I/O accesses for token type
+ */
+static inline unsigned int ioread8(void __iomem *p)
+{
+ return __builtin_read8(p);
+}
+
+static inline unsigned int ioread16(void __iomem *p)
+{
+ uint16_t ret = __builtin_read16(p);
+ if (__is_PCI_addr(p))
+ ret = _swapw(ret);
+ return ret;
+}
+
+static inline unsigned int ioread32(void __iomem *p)
+{
+ uint32_t ret = __builtin_read32(p);
+ if (__is_PCI_addr(p))
+ ret = _swapl(ret);
+ return ret;
+}
+
+static inline void iowrite8(u8 val, void __iomem *p)
+{
+ __builtin_write8(p, val);
+ if (__is_PCI_MEM(p))
+ __flush_PCI_writes();
+}
+
+static inline void iowrite16(u16 val, void __iomem *p)
+{
+ if (__is_PCI_addr(p))
+ val = _swapw(val);
+ __builtin_write16(p, val);
+ if (__is_PCI_MEM(p))
+ __flush_PCI_writes();
+}
+
+static inline void iowrite32(u32 val, void __iomem *p)
+{
+ if (__is_PCI_addr(p))
+ val = _swapl(val);
+ __builtin_write32(p, val);
+ if (__is_PCI_MEM(p))
+ __flush_PCI_writes();
+}
+
+static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count)
+{
+ io_insb((unsigned long) p, dst, count);
+}
+
+static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count)
+{
+ io_insw((unsigned long) p, dst, count);
+}
+
+static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count)
+{
+ __insl_ns((unsigned long) p, dst, count);
+}
+
+static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count)
+{
+ io_outsb((unsigned long) p, src, count);
+}
+
+static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count)
+{
+ io_outsw((unsigned long) p, src, count);
+}
+
+static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count)
+{
+ __outsl_ns((unsigned long) p, src, count);
+}
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+#ifndef __ASM_IOCTLS_H__
+#define __ASM_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* __ASM_IOCTLS_H__ */
+
--- /dev/null
+#ifndef __ASM_IPCBUF_H__
+#define __ASM_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* __ASM_IPCBUF_H__ */
+
--- /dev/null
+/* irc-regs.h: on-chip interrupt controller registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRC_REGS
+#define _ASM_IRC_REGS
+
+#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
+
+#define __get_TM0() ({ __reg(0xfeff9800); })
+#define __get_TM1() ({ __reg(0xfeff9808); })
+#define __set_TM1(V) do { __reg(0xfeff9808) = (V); mb(); } while(0)
+
+#define __set_TM1x(XI,V) \
+do { \
+ int shift = (XI) * 2 + 16; \
+ unsigned long tm1 = __reg(0xfeff9808); \
+ tm1 &= ~(0x3 << shift); \
+ tm1 |= (V) << shift; \
+ __reg(0xfeff9808) = tm1; \
+ mb(); \
+} while(0)
+
+#define __get_RS(C) ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; })
+
+#define __clr_RC(C) do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0)
+
+#define __get_MASK(C) ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; })
+#define __set_MASK(C) do { __reg(0xfeff9820) |= 1 << ((C)+16); mb(); } while(0)
+#define __clr_MASK(C) do { __reg(0xfeff9820) &= ~(1 << ((C)+16)); mb(); } while(0)
+
+#define __get_MASK_all() __get_MASK(0)
+#define __set_MASK_all() __set_MASK(0)
+#define __clr_MASK_all() __clr_MASK(0)
+
+#define __get_IRL() ({ (__reg(0xfeff9828) >> 16) & 0xf; })
+#define __clr_IRL() do { __reg(0xfeff9828) = 0x100000; mb(); } while(0)
+
+#define __get_IRR(N) ({ __reg(0xfeff9840 + (N) * 8); })
+#define __set_IRR(N,V) do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0)
+
+#define __get_IITMR(N) ({ __reg(0xfeff9880 + (N) * 8); })
+#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0)
+
+
+#endif /* _ASM_IRC_REGS */
--- /dev/null
+/* irq.h: FRV IRQ definitions
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_H_
+#define _ASM_IRQ_H_
+
+#define NR_IRQS 48
+#define IRQ_BASE_CPU (0 * 16)
+#define IRQ_BASE_FPGA (1 * 16)
+#define IRQ_BASE_MB93493 (2 * 16)
+
+/* probe returns a 32-bit IRQ mask:-/ */
+#define MIN_PROBE_IRQ (NR_IRQS - 32)
+
+#ifndef __ASSEMBLY__
+static inline int irq_canonicalize(int irq)
+{
+ return irq;
+}
+#endif
+
+#endif /* _ASM_IRQ_H_ */
--- /dev/null
+/* FRV per-CPU frame pointer holder
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ * - on FRV, GR28 is dedicated to keeping a pointer to the current exception
+ * frame
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
--- /dev/null
+#include <asm-generic/kdebug.h>
--- /dev/null
+
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ /* arch specific kmaps - change the numbers attached to these at your peril */
+ __KM_CACHE, /* cache flush page attachment point */
+ __KM_PGD, /* current page directory */
+ __KM_ITLB_PTD, /* current instruction TLB miss page table lookup */
+ __KM_DTLB_PTD, /* current data TLB miss page table lookup */
+
+ /* general kmaps */
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif
--- /dev/null
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
--- /dev/null
+#ifndef _ASM_LOCAL_H
+#define _ASM_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_LOCAL_H */
--- /dev/null
+#ifndef _ASM_MATH_EMU_H
+#define _ASM_MATH_EMU_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX 3
+#define FPSR_AEXC_DZ 4
+#define FPSR_AEXC_UNFL 5
+#define FPSR_AEXC_OVFL 6
+#define FPSR_AEXC_IOP 7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1 8
+#define FPSR_EXC_INEX2 9
+#define FPSR_EXC_DZ 10
+#define FPSR_EXC_UNFL 11
+#define FPSR_EXC_OVFL 12
+#define FPSR_EXC_OPERR 13
+#define FPSR_EXC_SNAN 14
+#define FPSR_EXC_BSUN 15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN 24
+#define FPSR_CC_INF 25
+#define FPSR_CC_Z 26
+#define FPSR_CC_NEG 27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define FPCR_ROUND_RN 0 /* round to nearest/even */
+#define FPCR_ROUND_RZ 1 /* round to zero */
+#define FPCR_ROUND_RM 2 /* minus infinity */
+#define FPCR_ROUND_RP 3 /* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X 0 /* long double */
+#define FPCR_PRECISION_S 1 /* double */
+#define FPCR_PRECISION_D 2 /* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE 0
+#define PEXECUTE 1
+#define PCONV 2
+#define PNORM 3
+#define PREGISTER 4
+#define PINSTR 5
+#define PUNIMPL 6
+#define PMOVEM 7
+
+#define PMDECODE (1<<PDECODE)
+#define PMEXECUTE (1<<PEXECUTE)
+#define PMCONV (1<<PCONV)
+#define PMNORM (1<<PNORM)
+#define PMREGISTER (1<<PREGISTER)
+#define PMINSTR (1<<PINSTR)
+#define PMUNIMPL (1<<PUNIMPL)
+#define PMMOVEM (1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+ unsigned long long m64;
+ unsigned long m32[2];
+};
+
+union fp_mant128 {
+ unsigned long long m64[2];
+ unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+ unsigned char lowmant;
+ unsigned char sign;
+ unsigned short exp;
+ union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+ below and the size in <asm/fpu.h>, too */
+struct fp_data {
+ struct fp_ext fpreg[8];
+ unsigned int fpcr;
+ unsigned int fpsr;
+ unsigned int fpiar;
+ unsigned short prec;
+ unsigned short rnd;
+ struct fp_ext temp[2];
+};
+
+#if FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({ \
+ if (fp_debugprint & (1 << (bit))) \
+ printk(fmt, ## args); \
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({ \
+ static int __count = 3; \
+ \
+ if (__count > 0) { \
+ printk("You just hit an unimplemented " \
+ "fpu instruction (%s)\n", str); \
+ printk("Please report this to ....\n"); \
+ __count--; \
+ } \
+})
+
+#define FPDATA ((struct fp_data *)current->thread.fp)
+
+#else /* __ASSEMBLY__ */
+
+#define FPDATA %a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND (TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO (PT_D0)
+#define FPS_D1 (PT_D1)
+#define FPS_D2 (PT_D2)
+#define FPS_A0 (PT_A0)
+#define FPS_A1 (PT_A1)
+#define FPS_A2 (PT_A2)
+#define FPS_SR (PT_SR)
+#define FPS_PC (PT_PC)
+#define FPS_EA (PT_PC+6)
+#define FPS_PC2 (PT_PC+10)
+
+.macro fp_get_fp_reg
+ lea (FPD_FPREG,FPDATA,%d0.w*4),%a0
+ lea (%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro fp_get_pc dest
+ move.l (FPS_PC+4,%sp),\dest
+.endm
+
+.macro fp_put_pc src,jump=0
+ move.l \src,(FPS_PC+4,%sp)
+.endm
+
+.macro fp_get_instr_data f,s,dest,label
+ getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+ addq.l #\s,%sp@(FPS_PC+4)
+.endm
+
+.macro fp_get_instr_word dest,label,addr
+ fp_get_instr_data w,2,\dest,\label,\addr
+.endm
+
+.macro fp_get_instr_long dest,label,addr
+ fp_get_instr_data l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro getuser size,src,dest,label,addr
+| printf ,"[\size<%08x]",1,\addr
+.Lu1\@: moves\size \src,\dest
+
+ .section .fixup,"ax"
+ .even
+.Lu2\@: move.l \addr,%a0
+ jra \label
+ .previous
+
+ .section __ex_table,"a"
+ .align 4
+ .long .Lu1\@,.Lu2\@
+ .previous
+.endm
+
+.macro putuser size,src,dest,label,addr
+| printf ,"[\size>%08x]",1,\addr
+.Lu1\@: moves\size \src,\dest
+.Lu2\@:
+
+ .section .fixup,"ax"
+ .even
+.Lu3\@: move.l \addr,%a0
+ jra \label
+ .previous
+
+ .section __ex_table,"a"
+ .align 4
+ .long .Lu1\@,.Lu3\@
+ .long .Lu2\@,.Lu3\@
+ .previous
+.endm
+
+
+.macro movestack nr,arg1,arg2,arg3,arg4,arg5
+ .if \nr
+ movestack (\nr-1),\arg2,\arg3,\arg4,\arg5
+ move.l \arg1,-(%sp)
+ .endif
+.endm
+
+.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+ .data
+.Lpdata\@:
+ .string "\string"
+ .previous
+
+ movem.l %d0/%d1/%a0/%a1,-(%sp)
+ .if \bit+1
+#if 0
+ moveq #\bit,%d0
+ andw #7,%d0
+ btst %d0,fp_debugprint+((31-\bit)/8)
+#else
+ btst #\bit,fp_debugprint+((31-\bit)/8)
+#endif
+ jeq .Lpskip\@
+ .endif
+ movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5
+ pea .Lpdata\@
+ jsr printk
+ lea ((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+ movem.l (%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro printx bit,fp
+#ifdef FPU_EMU_DEBUG
+ movem.l %d0/%a0,-(%sp)
+ lea \fp,%a0
+#if 0
+ moveq #'+',%d0
+ tst.w (%a0)
+ jeq .Lx1\@
+ moveq #'-',%d0
+.Lx1\@: printf \bit," %c",1,%d0
+ move.l (4,%a0),%d0
+ bclr #31,%d0
+ jne .Lx2\@
+ printf \bit,"0."
+ jra .Lx3\@
+.Lx2\@: printf \bit,"1."
+.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8)
+ move.w (2,%a0),%d0
+ ext.l %d0
+ printf \bit,"E%04x",1,%d0
+#else
+ printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+ movem.l (%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro debug instr,args
+#ifdef FPU_EMU_DEBUG
+ \instr \args
+#endif
+.endm
+
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_FRV_MATH_EMU_H */
+
--- /dev/null
+/* mb-regs.h: motherboard registers
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB_REGS_H
+#define _ASM_MB_REGS_H
+
+#include <asm/cpu-irqs.h>
+#include <asm/sections.h>
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/* gcc builtins, annotated */
+
+unsigned long __builtin_read8(volatile void __iomem *);
+unsigned long __builtin_read16(volatile void __iomem *);
+unsigned long __builtin_read32(volatile void __iomem *);
+void __builtin_write8(volatile void __iomem *, unsigned char);
+void __builtin_write16(volatile void __iomem *, unsigned short);
+void __builtin_write32(volatile void __iomem *, unsigned long);
+#endif
+
+#define __region_IO KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable
+ * protection laid over the top for use in memory-mapped
+ * I/O
+ */
+
+#define __region_CS0 0xff000000 /* Boot ROMs area */
+
+#ifdef CONFIG_MB93091_VDK
+/*
+ * VDK motherboard and CPU card specific stuff
+ */
+
+#include <asm/mb93091-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1
+
+#define __region_CS2 0xe0000000 /* SLBUS/PCI I/O space */
+#define __region_CS2_M 0x0fffffff /* mask */
+#define __region_CS2_C 0x00000000 /* control */
+#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M 0x00ffffff
+#define __region_CS5_C 0x00010000
+#define __region_CS7 0xf1000000 /* CB70 CPU-card PCMCIA port I/O space */
+#define __region_CS7_M 0x00ffffff
+#define __region_CS7_C 0x00410701
+#define __region_CS1 0xfc000000 /* SLBUS/PCI bridge control registers */
+#define __region_CS1_M 0x000fffff
+#define __region_CS1_C 0x00000000
+#define __region_CS6 0xfc100000 /* CB70 CPU-card DM9000 LAN I/O space */
+#define __region_CS6_M 0x000fffff
+#define __region_CS6_C 0x00400707
+#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M 0x000fffff
+#define __region_CS3_C 0xc8100000
+#define __region_CS4 0xfd000000 /* CB70 CPU-card extra flash space */
+#define __region_CS4_M 0x00ffffff
+#define __region_CS4_C 0x00000f07
+
+#define __region_PCI_IO (__region_CS2 + 0x04000000UL)
+#define __region_PCI_MEM (__region_CS2 + 0x08000000UL)
+#define __flush_PCI_writes() \
+do { \
+ __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0); \
+} while(0)
+
+#define __is_PCI_IO(addr) \
+ (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24) < (0x04000000UL >> 24))
+
+#define __is_PCI_MEM(addr) \
+ ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL)
+
+#define __is_PCI_addr(addr) \
+ ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL)
+
+#define __get_CLKSW() ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; })
+#define __get_CLKIN() (__get_CLKSW() * 125U * 100000U / 24U)
+
+#ifndef __ASSEMBLY__
+extern int __nongprelbss mb93090_mb00_detected;
+#endif
+
+#define __addr_LEDS() (__region_CS2 + 0x01200004UL)
+#ifdef CONFIG_MB93090_MB00
+#define __set_LEDS(X) \
+do { \
+ if (mb93090_mb00_detected) \
+ __builtin_write32((void __iomem *) __addr_LEDS(), ~(X)); \
+} while (0)
+#else
+#define __set_LEDS(X)
+#endif
+
+#define __addr_LCD() (__region_CS2 + 0x01200008UL)
+#define __get_LCD(B) __builtin_read32((volatile void __iomem *) (B))
+#define __set_LCD(B,X) __builtin_write32((volatile void __iomem *) (B), (X))
+
+#define LCD_D 0x000000ff /* LCD data bus */
+#define LCD_RW 0x00000100 /* LCD R/W signal */
+#define LCD_RS 0x00000200 /* LCD Register Select */
+#define LCD_E 0x00000400 /* LCD Start Enable Signal */
+
+#define LCD_CMD_CLEAR (LCD_E|0x001)
+#define LCD_CMD_HOME (LCD_E|0x002)
+#define LCD_CMD_CURSOR_INC (LCD_E|0x004)
+#define LCD_CMD_SCROLL_INC (LCD_E|0x005)
+#define LCD_CMD_CURSOR_DEC (LCD_E|0x006)
+#define LCD_CMD_SCROLL_DEC (LCD_E|0x007)
+#define LCD_CMD_OFF (LCD_E|0x008)
+#define LCD_CMD_ON(CRSR,BLINK) (LCD_E|0x00c|(CRSR<<1)|BLINK)
+#define LCD_CMD_CURSOR_MOVE_L (LCD_E|0x010)
+#define LCD_CMD_CURSOR_MOVE_R (LCD_E|0x014)
+#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018)
+#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c)
+#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2))
+#define LCD_CMD_SET_CG_ADDR(X) (LCD_E|0x040|X)
+#define LCD_CMD_SET_DD_ADDR(X) (LCD_E|0x080|X)
+#define LCD_CMD_READ_BUSY (LCD_E|LCD_RW)
+#define LCD_DATA_WRITE(X) (LCD_E|LCD_RS|(X))
+#define LCD_DATA_READ (LCD_E|LCD_RS|LCD_RW)
+
+#else
+/*
+ * PDK unit specific stuff
+ */
+
+#include <asm/mb93093-fpga-irqs.h>
+
+#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0
+#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1
+
+#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */
+#define __region_CS5_M 0x00ffffff /* mask */
+#define __region_CS5_C 0x00010000 /* control */
+#define __region_CS2 0x20000000 /* FPGA registers */
+#define __region_CS2_M 0x000fffff
+#define __region_CS2_C 0x00000000
+#define __region_CS1 0xfc100000 /* LAN registers */
+#define __region_CS1_M 0x000fffff
+#define __region_CS1_C 0x00010404
+#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */
+#define __region_CS3_M 0x000fffff
+#define __region_CS3_C 0xc8000000
+#define __region_CS4 0xfd000000 /* extra ROMs area */
+#define __region_CS4_M 0x00ffffff
+#define __region_CS4_C 0x00000f07
+
+#define __region_CS6 0xfe000000 /* not used - hide behind CPU resource I/O regs */
+#define __region_CS6_M 0x000fffff
+#define __region_CS6_C 0x00000f07
+#define __region_CS7 0xfe000000 /* not used - hide behind CPU resource I/O regs */
+#define __region_CS7_M 0x000fffff
+#define __region_CS7_C 0x00000f07
+
+#define __is_PCI_IO(addr) 0 /* no PCI */
+#define __is_PCI_MEM(addr) 0
+#define __is_PCI_addr(addr) 0
+#define __region_PCI_IO 0
+#define __region_PCI_MEM 0
+#define __flush_PCI_writes() do { } while(0)
+
+#define __get_CLKSW() 0UL
+#define __get_CLKIN() 66000000UL
+
+#define __addr_LEDS() (__region_CS2 + 0x00000023UL)
+#define __set_LEDS(X) __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X))
+
+#define __addr_FPGATR() (__region_CS2 + 0x00000030UL)
+#define __set_FPGATR(X) __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X))
+#define __get_FPGATR() __builtin_read32((volatile void __iomem *) __addr_FPGATR())
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK 0x00000003
+
+#define __set_FPGATR_AUDIO_CLK(V) \
+ __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V))
+
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF 0x0
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz 0x1
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz 0x2
+#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz 0x3
+
+#define MB93093_FPGA_SWR_PUSHSWMASK (0x1F<<26)
+#define MB93093_FPGA_SWR_PUSHSW4 (1<<29)
+
+#define __addr_FPGA_SWR ((volatile void __iomem *)(__region_CS2 + 0x28UL))
+#define __get_FPGA_PUSHSW1_5() (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK)
+
+
+#endif
+
+#endif /* _ASM_MB_REGS_H */
--- /dev/null
+/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB86943A_H
+#define _ASM_MB86943A_H
+
+#include <asm/mb-regs.h>
+
+#define __reg_MB86943_sl_ctl *(volatile uint32_t *) (__region_CS1 + 0x00)
+
+#define MB86943_SL_CTL_BUS_WIDTH_64 0x00000001
+#define MB86943_SL_CTL_AS_HOST 0x00000002
+#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004
+#define MB86943_SL_CTL_DRCT_SLAVE_SWAP 0x00000008
+#define MB86943_SL_CTL_PCI_CONFIG_SWAP 0x00000010
+#define MB86943_SL_CTL_ECS0_ENABLE 0x00000020
+#define MB86943_SL_CTL_ECS1_ENABLE 0x00000040
+#define MB86943_SL_CTL_ECS2_ENABLE 0x00000080
+
+#define __reg_MB86943_ecs_ctl(N) *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N)))
+#define __reg_MB86943_ecs_range(N) *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N)))
+#define __reg_MB86943_ecs_base(N) *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N)))
+
+#define __reg_MB86943_sl_pci_io_range *(volatile uint32_t *) (__region_CS1 + 0x50)
+#define __reg_MB86943_sl_pci_io_base *(volatile uint32_t *) (__region_CS1 + 0x58)
+#define __reg_MB86943_sl_pci_mem_range *(volatile uint32_t *) (__region_CS1 + 0x60)
+#define __reg_MB86943_sl_pci_mem_base *(volatile uint32_t *) (__region_CS1 + 0x68)
+#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70)
+#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78)
+
+#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014)
+#define MB86943_PCIARB_EN 0x00000001
+
+#endif /* _ASM_MB86943A_H */
--- /dev/null
+/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93091_FPGA_IRQS_H
+#define _ASM_MB93091_FPGA_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+ IRQ_FPGA__UNUSED = IRQ_BASE_FPGA,
+ IRQ_FPGA_SYSINT_BUS_EXPANSION_1,
+ IRQ_FPGA_SL_BUS_EXPANSION_2,
+ IRQ_FPGA_PCI_INTD,
+ IRQ_FPGA_PCI_INTC,
+ IRQ_FPGA_PCI_INTB,
+ IRQ_FPGA_PCI_INTA,
+ IRQ_FPGA_SL_BUS_EXPANSION_7,
+ IRQ_FPGA_SYSINT_BUS_EXPANSION_8,
+ IRQ_FPGA_SL_BUS_EXPANSION_9,
+ IRQ_FPGA_MB86943_PCI_INTA,
+ IRQ_FPGA_MB86943_SLBUS_SIDE,
+ IRQ_FPGA_RTL8029_INTA,
+ IRQ_FPGA_SYSINT_BUS_EXPANSION_13,
+ IRQ_FPGA_SL_BUS_EXPANSION_14,
+ IRQ_FPGA_NMI,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93091_FPGA_IRQS_H */
--- /dev/null
+/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93093_FPGA_IRQS_H
+#define _ASM_MB93093_FPGA_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+ IRQ_FPGA_PUSH_BUTTON_SW1_5 = IRQ_BASE_FPGA + 8,
+ IRQ_FPGA_ROCKER_C_SW8 = IRQ_BASE_FPGA + 9,
+ IRQ_FPGA_ROCKER_C_SW9 = IRQ_BASE_FPGA + 10,
+};
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93093_FPGA_IRQS_H */
--- /dev/null
+/* mb93493-irqs.h: MB93493 companion chip IRQs
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_IRQS_H
+#define _ASM_MB93493_IRQS_H
+
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+/* IRQ IDs presented to drivers */
+enum {
+ IRQ_MB93493_VDC = IRQ_BASE_MB93493 + 0,
+ IRQ_MB93493_VCC = IRQ_BASE_MB93493 + 1,
+ IRQ_MB93493_AUDIO_OUT = IRQ_BASE_MB93493 + 2,
+ IRQ_MB93493_I2C_0 = IRQ_BASE_MB93493 + 3,
+ IRQ_MB93493_I2C_1 = IRQ_BASE_MB93493 + 4,
+ IRQ_MB93493_USB = IRQ_BASE_MB93493 + 5,
+ IRQ_MB93493_LOCAL_BUS = IRQ_BASE_MB93493 + 7,
+ IRQ_MB93493_PCMCIA = IRQ_BASE_MB93493 + 8,
+ IRQ_MB93493_GPIO = IRQ_BASE_MB93493 + 9,
+ IRQ_MB93493_AUDIO_IN = IRQ_BASE_MB93493 + 10,
+};
+
+/* IRQ multiplexor mappings */
+#define ROUTE_VIA_IRQ0 0 /* route IRQ by way of CPU external IRQ 0 */
+#define ROUTE_VIA_IRQ1 1 /* route IRQ by way of CPU external IRQ 1 */
+
+#define IRQ_MB93493_VDC_ROUTE ROUTE_VIA_IRQ0
+#define IRQ_MB93493_VCC_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_OUT_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_0_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_I2C_1_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_USB_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_LOCAL_BUS_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_PCMCIA_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_GPIO_ROUTE ROUTE_VIA_IRQ1
+#define IRQ_MB93493_AUDIO_IN_ROUTE ROUTE_VIA_IRQ1
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_MB93493_IRQS_H */
--- /dev/null
+/* mb93493-regs.h: MB93493 companion chip registers
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MB93493_REGS_H
+#define _ASM_MB93493_REGS_H
+
+#include <asm/mb-regs.h>
+#include <asm/mb93493-irqs.h>
+
+#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X)))
+#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); })
+
+#define __set_MB93493(X,V) \
+do { \
+ *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb(); \
+} while(0)
+
+#define __get_MB93493_STSR(X) __get_MB93493(0x3c0 + (X) * 4)
+#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V))
+#define MB93493_STSR_EN
+
+#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4)
+#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4)
+#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V))
+
+#define __get_MB93493_DQSR(X) __get_MB93493(0x3e0 + (X) * 4)
+#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V))
+
+#define __get_MB93493_LBSER() __get_MB93493(0x3f0)
+#define __set_MB93493_LBSER(V) __set_MB93493(0x3f0, (V))
+
+#define MB93493_LBSER_VDC 0x00010000
+#define MB93493_LBSER_VCC 0x00020000
+#define MB93493_LBSER_AUDIO 0x00040000
+#define MB93493_LBSER_I2C_0 0x00080000
+#define MB93493_LBSER_I2C_1 0x00100000
+#define MB93493_LBSER_USB 0x00200000
+#define MB93493_LBSER_GPIO 0x00800000
+#define MB93493_LBSER_PCMCIA 0x01000000
+
+#define __get_MB93493_LBSR() __get_MB93493(0x3fc)
+#define __set_MB93493_LBSR(V) __set_MB93493(0x3fc, (V))
+
+/*
+ * video display controller
+ */
+#define __get_MB93493_VDC(X) __get_MB93493(MB93493_VDC_##X)
+#define __set_MB93493_VDC(X,V) __set_MB93493(MB93493_VDC_##X, (V))
+
+#define MB93493_VDC_RCURSOR 0x140 /* cursor position */
+#define MB93493_VDC_RCT1 0x144 /* cursor colour 1 */
+#define MB93493_VDC_RCT2 0x148 /* cursor colour 2 */
+#define MB93493_VDC_RHDC 0x150 /* horizontal display period */
+#define MB93493_VDC_RH_MARGINS 0x154 /* horizontal margin sizes */
+#define MB93493_VDC_RVDC 0x158 /* vertical display period */
+#define MB93493_VDC_RV_MARGINS 0x15c /* vertical margin sizes */
+#define MB93493_VDC_RC 0x170 /* VDC control */
+#define MB93493_VDC_RCLOCK 0x174 /* clock divider, DMA req delay */
+#define MB93493_VDC_RBLACK 0x178 /* black insert sizes */
+#define MB93493_VDC_RS 0x17c /* VDC status */
+
+#define __addr_MB93493_VDC_BCI(X) ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); })
+#define __addr_MB93493_VDC_TPO(X) (__region_CS3 + 0x1c0 + (X))
+
+#define VDC_TPO_WIDTH 32
+
+#define VDC_RC_DSR 0x00000080 /* VDC master reset */
+
+#define VDC_RS_IT 0x00060000 /* interrupt indicators */
+#define VDC_RS_IT_UNDERFLOW 0x00040000 /* - underflow event */
+#define VDC_RS_IT_VSYNC 0x00020000 /* - VSYNC event */
+#define VDC_RS_DFI 0x00010000 /* current interlace field number */
+#define VDC_RS_DFI_TOP 0x00000000 /* - top field */
+#define VDC_RS_DFI_BOTTOM 0x00010000 /* - bottom field */
+#define VDC_RS_DCSR 0x00000010 /* cursor state */
+#define VDC_RS_DCM 0x00000003 /* display mode */
+#define VDC_RS_DCM_DISABLED 0x00000000 /* - display disabled */
+#define VDC_RS_DCM_STOPPED 0x00000001 /* - VDC stopped */
+#define VDC_RS_DCM_FREERUNNING 0x00000002 /* - VDC free-running */
+#define VDC_RS_DCM_TRANSFERRING 0x00000003 /* - data being transferred to VDC */
+
+/*
+ * video capture controller
+ */
+#define __get_MB93493_VCC(X) __get_MB93493(MB93493_VCC_##X)
+#define __set_MB93493_VCC(X,V) __set_MB93493(MB93493_VCC_##X, (V))
+
+#define MB93493_VCC_RREDUCT 0x104 /* reduction rate */
+#define MB93493_VCC_RHY 0x108 /* horizontal brightness filter coefficients */
+#define MB93493_VCC_RHC 0x10c /* horizontal colour-difference filter coefficients */
+#define MB93493_VCC_RHSIZE 0x110 /* horizontal cycle sizes */
+#define MB93493_VCC_RHBC 0x114 /* horizontal back porch size */
+#define MB93493_VCC_RVCC 0x118 /* vertical capture period */
+#define MB93493_VCC_RVBC 0x11c /* vertical back porch period */
+#define MB93493_VCC_RV 0x120 /* vertical filter coefficients */
+#define MB93493_VCC_RDTS 0x128 /* DMA transfer size */
+#define MB93493_VCC_RDTS_4B 0x01000000 /* 4-byte transfer */
+#define MB93493_VCC_RDTS_32B 0x03000000 /* 32-byte transfer */
+#define MB93493_VCC_RDTS_SHIFT 24
+#define MB93493_VCC_RCC 0x130 /* VCC control */
+#define MB93493_VCC_RIS 0x134 /* VCC interrupt status */
+
+#define __addr_MB93493_VCC_TPI(X) (__region_CS3 + 0x180 + (X))
+
+#define VCC_RHSIZE_RHCC 0x000007ff
+#define VCC_RHSIZE_RHCC_SHIFT 0
+#define VCC_RHSIZE_RHTCC 0x0fff0000
+#define VCC_RHSIZE_RHTCC_SHIFT 16
+
+#define VCC_RVBC_RVBC 0x00003f00
+#define VCC_RVBC_RVBC_SHIFT 8
+
+#define VCC_RREDUCT_RHR 0x07ff0000
+#define VCC_RREDUCT_RHR_SHIFT 16
+#define VCC_RREDUCT_RVR 0x000007ff
+#define VCC_RREDUCT_RVR_SHIFT 0
+
+#define VCC_RCC_CE 0x00000001 /* VCC enable */
+#define VCC_RCC_CS 0x00000002 /* request video capture start */
+#define VCC_RCC_CPF 0x0000000c /* pixel format */
+#define VCC_RCC_CPF_YCBCR_16 0x00000000 /* - YCbCr 4:2:2 16-bit format */
+#define VCC_RCC_CPF_RGB 0x00000004 /* - RGB 4:4:4 format */
+#define VCC_RCC_CPF_YCBCR_24 0x00000008 /* - YCbCr 4:2:2 24-bit format */
+#define VCC_RCC_CPF_BT656 0x0000000c /* - ITU R-BT.656 format */
+#define VCC_RCC_CPF_SHIFT 2
+#define VCC_RCC_CSR 0x00000080 /* request reset */
+#define VCC_RCC_HSIP 0x00000100 /* HSYNC polarity */
+#define VCC_RCC_HSIP_LOACT 0x00000000 /* - low active */
+#define VCC_RCC_HSIP_HIACT 0x00000100 /* - high active */
+#define VCC_RCC_VSIP 0x00000200 /* VSYNC polarity */
+#define VCC_RCC_VSIP_LOACT 0x00000000 /* - low active */
+#define VCC_RCC_VSIP_HIACT 0x00000200 /* - high active */
+#define VCC_RCC_CIE 0x00000800 /* interrupt enable */
+#define VCC_RCC_CFP 0x00001000 /* RGB pixel packing */
+#define VCC_RCC_CFP_4TO3 0x00000000 /* - pack 4 pixels into 3 words */
+#define VCC_RCC_CFP_1TO1 0x00001000 /* - pack 1 pixel into 1 words */
+#define VCC_RCC_CSM 0x00006000 /* interlace specification */
+#define VCC_RCC_CSM_ONEPASS 0x00002000 /* - non-interlaced */
+#define VCC_RCC_CSM_INTERLACE 0x00004000 /* - interlaced */
+#define VCC_RCC_CSM_SHIFT 13
+#define VCC_RCC_ES 0x00008000 /* capture start polarity */
+#define VCC_RCC_ES_NEG 0x00000000 /* - negative edge */
+#define VCC_RCC_ES_POS 0x00008000 /* - positive edge */
+#define VCC_RCC_IFI 0x00080000 /* inferlace field evaluation reverse */
+#define VCC_RCC_FDTS 0x00300000 /* interlace field start */
+#define VCC_RCC_FDTS_3_8 0x00000000 /* - 3/8 of horizontal entire cycle */
+#define VCC_RCC_FDTS_1_4 0x00100000 /* - 1/4 of horizontal entire cycle */
+#define VCC_RCC_FDTS_7_16 0x00200000 /* - 7/16 of horizontal entire cycle */
+#define VCC_RCC_FDTS_SHIFT 20
+#define VCC_RCC_MOV 0x00400000 /* test bit - always set to 1 */
+#define VCC_RCC_STP 0x00800000 /* request video capture stop */
+#define VCC_RCC_TO 0x01000000 /* input during top-field only */
+
+#define VCC_RIS_VSYNC 0x01000000 /* VSYNC interrupt */
+#define VCC_RIS_OV 0x02000000 /* overflow interrupt */
+#define VCC_RIS_BOTTOM 0x08000000 /* interlace bottom field */
+#define VCC_RIS_STARTED 0x10000000 /* capture started */
+
+/*
+ * I2C
+ */
+#define MB93493_I2C_BSR 0x340 /* bus status */
+#define MB93493_I2C_BCR 0x344 /* bus control */
+#define MB93493_I2C_CCR 0x348 /* clock control */
+#define MB93493_I2C_ADR 0x34c /* address */
+#define MB93493_I2C_DTR 0x350 /* data */
+#define MB93493_I2C_BC2R 0x35c /* bus control 2 */
+
+#define __addr_MB93493_I2C(port,X) (__region_CS3 + MB93493_I2C_##X + ((port)*0x20))
+#define __get_MB93493_I2C(port,X) __get_MB93493(MB93493_I2C_##X + ((port)*0x20))
+#define __set_MB93493_I2C(port,X,V) __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V))
+
+#define I2C_BSR_BB (1 << 7)
+
+/*
+ * audio controller (I2S) registers
+ */
+#define __get_MB93493_I2S(X) __get_MB93493(MB93493_I2S_##X)
+#define __set_MB93493_I2S(X,V) __set_MB93493(MB93493_I2S_##X, (V))
+
+#define MB93493_I2S_ALDR 0x300 /* L-channel data */
+#define MB93493_I2S_ARDR 0x304 /* R-channel data */
+#define MB93493_I2S_APDR 0x308 /* 16-bit packed data */
+#define MB93493_I2S_AISTR 0x310 /* status */
+#define MB93493_I2S_AICR 0x314 /* control */
+
+#define __addr_MB93493_I2S_ALDR(X) (__region_CS3 + MB93493_I2S_ALDR + (X))
+#define __addr_MB93493_I2S_ARDR(X) (__region_CS3 + MB93493_I2S_ARDR + (X))
+#define __addr_MB93493_I2S_APDR(X) (__region_CS3 + MB93493_I2S_APDR + (X))
+#define __addr_MB93493_I2S_ADR(X) (__region_CS3 + 0x320 + (X))
+
+#define I2S_AISTR_OTST 0x00000003 /* status of output data transfer */
+#define I2S_AISTR_OTR 0x00000010 /* output transfer request pending */
+#define I2S_AISTR_OUR 0x00000020 /* output FIFO underrun detected */
+#define I2S_AISTR_OOR 0x00000040 /* output FIFO overrun detected */
+#define I2S_AISTR_ODS 0x00000100 /* output DMA transfer size */
+#define I2S_AISTR_ODE 0x00000400 /* output DMA transfer request enable */
+#define I2S_AISTR_OTRIE 0x00001000 /* output transfer request interrupt enable */
+#define I2S_AISTR_OURIE 0x00002000 /* output FIFO underrun interrupt enable */
+#define I2S_AISTR_OORIE 0x00004000 /* output FIFO overrun interrupt enable */
+#define I2S_AISTR__OUT_MASK 0x00007570
+#define I2S_AISTR_ITST 0x00030000 /* status of input data transfer */
+#define I2S_AISTR_ITST_SHIFT 16
+#define I2S_AISTR_ITR 0x00100000 /* input transfer request pending */
+#define I2S_AISTR_IUR 0x00200000 /* input FIFO underrun detected */
+#define I2S_AISTR_IOR 0x00400000 /* input FIFO overrun detected */
+#define I2S_AISTR_IDS 0x01000000 /* input DMA transfer size */
+#define I2S_AISTR_IDE 0x04000000 /* input DMA transfer request enable */
+#define I2S_AISTR_ITRIE 0x10000000 /* input transfer request interrupt enable */
+#define I2S_AISTR_IURIE 0x20000000 /* input FIFO underrun interrupt enable */
+#define I2S_AISTR_IORIE 0x40000000 /* input FIFO overrun interrupt enable */
+#define I2S_AISTR__IN_MASK 0x75700000
+
+#define I2S_AICR_MI 0x00000001 /* mono input requested */
+#define I2S_AICR_AMI 0x00000002 /* relation between LRCKI/FS1 and SDI */
+#define I2S_AICR_LRI 0x00000004 /* function of LRCKI pin */
+#define I2S_AICR_SDMI 0x00000070 /* format of input audio data */
+#define I2S_AICR_SDMI_SHIFT 4
+#define I2S_AICR_CLI 0x00000080 /* input FIFO clearing control */
+#define I2S_AICR_IM 0x00000300 /* input state control */
+#define I2S_AICR_IM_SHIFT 8
+#define I2S_AICR__IN_MASK 0x000003f7
+#define I2S_AICR_MO 0x00001000 /* mono output requested */
+#define I2S_AICR_AMO 0x00002000 /* relation between LRCKO/FS0 and SDO */
+#define I2S_AICR_AMO_SHIFT 13
+#define I2S_AICR_LRO 0x00004000 /* function of LRCKO pin */
+#define I2S_AICR_SDMO 0x00070000 /* format of output audio data */
+#define I2S_AICR_SDMO_SHIFT 16
+#define I2S_AICR_CLO 0x00080000 /* output FIFO clearing control */
+#define I2S_AICR_OM 0x00100000 /* output state control */
+#define I2S_AICR__OUT_MASK 0x001f7000
+#define I2S_AICR_DIV 0x03000000 /* frequency division rate */
+#define I2S_AICR_DIV_SHIFT 24
+#define I2S_AICR_FL 0x20000000 /* frame length */
+#define I2S_AICR_FS 0x40000000 /* frame sync method */
+#define I2S_AICR_ME 0x80000000 /* master enable */
+
+/*
+ * PCMCIA
+ */
+#define __addr_MB93493_PCMCIA(X) ((volatile unsigned long *)(__region_CS5 + (X)))
+
+/*
+ * GPIO
+ */
+#define __get_MB93493_GPIO_PDR(X) __get_MB93493(0x380 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDR(X,V) __set_MB93493(0x380 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_GPDR(X) __get_MB93493(0x384 + (X) * 0xc0)
+#define __set_MB93493_GPIO_GPDR(X,V) __set_MB93493(0x384 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SIR(X) __get_MB93493(0x388 + (X) * 0xc0)
+#define __set_MB93493_GPIO_SIR(X,V) __set_MB93493(0x388 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_SOR(X) __get_MB93493(0x38c + (X) * 0xc0)
+#define __set_MB93493_GPIO_SOR(X,V) __set_MB93493(0x38c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDSR(X) __get_MB93493(0x390 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDSR(X,V) __set_MB93493(0x390 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_PDCR(X) __get_MB93493(0x394 + (X) * 0xc0)
+#define __set_MB93493_GPIO_PDCR(X,V) __set_MB93493(0x394 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_INTST(X) __get_MB93493(0x398 + (X) * 0xc0)
+#define __set_MB93493_GPIO_INTST(X,V) __set_MB93493(0x398 + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IEHL(X) __get_MB93493(0x39c + (X) * 0xc0)
+#define __set_MB93493_GPIO_IEHL(X,V) __set_MB93493(0x39c + (X) * 0xc0, (V))
+
+#define __get_MB93493_GPIO_IELH(X) __get_MB93493(0x3a0 + (X) * 0xc0)
+#define __set_MB93493_GPIO_IELH(X,V) __set_MB93493(0x3a0 + (X) * 0xc0, (V))
+
+#endif /* _ASM_MB93493_REGS_H */
--- /dev/null
+/* mc146818rtc.h: RTC defs
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+
+#endif /* _ASM_MC146818RTC_H */
--- /dev/null
+/* mem-layout.h: memory layout
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MEM_LAYOUT_H
+#define _ASM_MEM_LAYOUT_H
+
+#ifndef __ASSEMBLY__
+#define __UL(X) ((unsigned long) (X))
+#else
+#define __UL(X) (X)
+#endif
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#define PAGE_SHIFT 14
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#endif
+
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define ARCH_KMALLOC_MINALIGN 8
+#define ARCH_SLAB_MINALIGN 8
+
+/*****************************************************************************/
+/*
+ * virtual memory layout from kernel's point of view
+ */
+#define PAGE_OFFSET ((unsigned long) &__page_offset)
+
+#ifdef CONFIG_MMU
+
+/* see Documentation/frv/mmu-layout.txt */
+#define KERNEL_LOWMEM_START __UL(0xc0000000)
+#define KERNEL_LOWMEM_END __UL(0xd0000000)
+#define VMALLOC_START __UL(0xd0000000)
+#define VMALLOC_END __UL(0xd8000000)
+#define PKMAP_BASE __UL(0xd8000000)
+#define PKMAP_END __UL(0xdc000000)
+#define KMAP_ATOMIC_SECONDARY_FRAME __UL(0xdc000000)
+#define KMAP_ATOMIC_PRIMARY_FRAME __UL(0xdd000000)
+
+#endif
+
+#define KERNEL_IO_START __UL(0xe0000000)
+
+
+/*****************************************************************************/
+/*
+ * memory layout from userspace's point of view
+ */
+#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE)
+#define STACK_TOP __UL(2 * 1024 * 1024)
+#define STACK_TOP_MAX __UL(0xc0000000)
+
+/* userspace process size */
+#ifdef CONFIG_MMU
+#define TASK_SIZE (PAGE_OFFSET)
+#else
+#define TASK_SIZE __UL(0xFFFFFFFFUL)
+#endif
+
+/* base of area at which unspecified mmaps will start */
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+#define TASK_UNMAPPED_BASE __UL(16 * 1024 * 1024)
+#else
+#define TASK_UNMAPPED_BASE __UL(TASK_SIZE / 3)
+#endif
+
+#endif /* _ASM_MEM_LAYOUT_H */
--- /dev/null
+#ifndef __ASM_MMAN_H__
+#define __ASM_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* __ASM_MMAN_H__ */
+
--- /dev/null
+/* mmu.h: memory management context for FR-V with or without MMU support
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+typedef struct {
+#ifdef CONFIG_MMU
+ struct list_head id_link; /* link in list of context ID owners */
+ unsigned short id; /* MMU context ID */
+ unsigned short id_busy; /* true if ID is in CXNR */
+ unsigned long itlb_cached_pge; /* [SCR0] PGE cached for insn TLB handler */
+ unsigned long itlb_ptd_mapping; /* [DAMR4] PTD mapping for itlb cached PGE */
+ unsigned long dtlb_cached_pge; /* [SCR1] PGE cached for data TLB handler */
+ unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */
+
+#else
+ unsigned long end_brk;
+
+#endif
+
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+ unsigned long exec_fdpic_loadmap;
+ unsigned long interp_fdpic_loadmap;
+#endif
+
+} mm_context_t;
+
+#ifdef CONFIG_MMU
+extern int __nongpreldata cxn_pinned;
+extern int cxn_pin_by_pid(pid_t pid);
+#endif
+
+#endif /* _ASM_MMU_H */
--- /dev/null
+/* mmu_context.h: MMU context management routines
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_MMU
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd);
+extern void destroy_context(struct mm_struct *mm);
+
+#else
+#define init_new_context(tsk, mm) ({ 0; })
+#define change_mm_context(old, ctx, _pml4) do {} while(0)
+#define destroy_context(mm) do {} while(0)
+#endif
+
+#define switch_mm(prev, next, tsk) \
+do { \
+ if (prev != next) \
+ change_mm_context(&prev->context, &next->context, next->pgd); \
+} while(0)
+
+#define activate_mm(prev, next) \
+do { \
+ change_mm_context(&prev->context, &next->context, next->pgd); \
+} while(0)
+
+#define deactivate_mm(tsk, mm) \
+do { \
+} while(0)
+
+#endif
--- /dev/null
+/* module.h: FRV module stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific
+{
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/*
+ * Include the architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
+
--- /dev/null
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
+
--- /dev/null
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
--- /dev/null
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+#include <asm/virtconvert.h>
+#include <asm/mem-layout.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
+#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long ste[64];} pmd_t;
+typedef struct { pmd_t pue[1]; } pud_t;
+typedef struct { pud_t pge[1]; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x) ((x).pte)
+#define pmd_val(x) ((x).ste[0])
+#define pud_val(x) ((x).pue[0])
+#define pgd_val(x) ((x).pge[0])
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pud(x) ((pud_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+#define PTE_MASK PAGE_MASK
+
+#define devmem_is_allowed(pfn) 1
+
+#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr))
+#define __va(paddr) phys_to_virt((unsigned long) (paddr))
+
+#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#ifdef CONFIG_MMU
+#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#else
+#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
+#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+
+#endif
+
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+
+#ifdef CONFIG_MMU
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_PAGE_H */
--- /dev/null
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ /* Internal kernel timer frequency */
+#define USER_HZ 100 /* .. some user interfaces are in "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 16384
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _ASM_PARAM_H */
--- /dev/null
+/* pci.h: FR-V specific PCI declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m68k/pci.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef ASM_PCI_H
+#define ASM_PCI_H
+
+#include <linux/mm.h>
+#include <asm/scatterlist.h>
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci.h>
+
+struct pci_dev;
+
+#define pcibios_assign_all_busses() 0
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+extern void pcibios_penalize_isa_irq(int irq);
+
+#ifdef CONFIG_MMU
+extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle);
+extern void consistent_free(void *vaddr);
+extern void consistent_sync(void *vaddr, size_t size, int direction);
+extern void consistent_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction);
+#endif
+
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
+ dma_addr_t *dma_handle);
+
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+/* Return the index of the PCI controller for device PDEV. */
+#define pci_controller_num(PDEV) (0)
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME) (0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME) (0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+ enum pci_dma_burst_strategy *strat,
+ unsigned long *strategy_parameter)
+{
+ *strat = PCI_DMA_BURST_INFINITY;
+ *strategy_parameter = ~0UL;
+}
+#endif
+
+/*
+ * These are pretty much arbitary with the CoMEM implementation.
+ * We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x00010000
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so. At the
+ * next point you give the PCI dma address back to the card, the
+ * device again owns the buffer.
+ */
+static inline void pci_dma_sync_single(struct pci_dev *hwdev,
+ dma_addr_t dma_handle,
+ size_t size, int direction)
+{
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
+ (unsigned long)bus_to_virt(dma_handle) + size);
+}
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
+ struct scatterlist *sg,
+ int nelems, int direction)
+{
+ int i;
+
+ if (direction == PCI_DMA_NONE)
+ BUG();
+
+ for (i = 0; i < nelems; i++)
+ frv_cache_wback_inv(sg_dma_address(&sg[i]),
+ sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
+}
+
+
+#endif
--- /dev/null
+#ifndef __ASM_PERCPU_H
+#define __ASM_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_PERCPU_H */
--- /dev/null
+/* pgalloc.h: Page allocation routines for FRV
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ * include/asm-m68knommu/pgalloc.h
+ * include/asm-i386/pgalloc.h
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+#ifdef CONFIG_MMU
+
+#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE)
+#define pmd_populate(MM, PMD, PAGE) \
+do { \
+ __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \
+} while(0)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *mm, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+
+extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+ pgtable_page_dtor(pte);
+ __free_page(pte);
+}
+
+#define __pte_free_tlb(tlb,pte) \
+do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb),(pte)); \
+} while (0)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ * (In the PAE case we free the pmds as part of the pgd.)
+ */
+#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); })
+#define pmd_free(mm, x) do { } while (0)
+#define __pmd_free_tlb(tlb,x) do { } while (0)
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASM_PGALLOC_H */
--- /dev/null
+/* pgtable.h: FR-V page table mangling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Derived from:
+ * include/asm-m68knommu/pgtable.h
+ * include/asm-i386/pgtable.h
+ */
+
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/mem-layout.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+struct vm_area_struct;
+#endif
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_HIGHPTE)
+typedef unsigned long pte_addr_t;
+#else
+typedef pte_t *pte_addr_t;
+#endif
+#endif
+
+/*****************************************************************************/
+/*
+ * MMU-less operation case first
+ */
+#ifndef CONFIG_MMU
+
+#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *) 0)
+
+#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+#ifndef __ASSEMBLY__
+static inline int pte_file(pte_t pte) { return 0; }
+#endif
+
+#define ZERO_PAGE(vaddr) ({ BUG(); NULL; })
+
+#define swapper_pg_dir ((pgd_t *) NULL)
+
+#define pgtable_cache_init() do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
+#else /* !CONFIG_MMU */
+/*****************************************************************************/
+/*
+ * then MMU operation
+ */
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long empty_zero_page;
+#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
+#endif
+
+/*
+ * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry)
+ * [see Documentation/frv/mmu-layout.txt]
+ *
+ * Page Directory:
+ * - Size: 16KB
+ * - 64 PGEs per PGD
+ * - Each PGE holds 1 PUD and covers 64MB
+ *
+ * Page Upper Directory:
+ * - Size: 256B
+ * - 1 PUE per PUD
+ * - Each PUE holds 1 PMD and covers 64MB
+ *
+ * Page Mid-Level Directory
+ * - Size: 256B
+ * - 1 PME per PMD
+ * - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table
+ * - All STEs are instantiated at the same time
+ *
+ * Page Table
+ * - Size: 16KB
+ * - 4096 PTEs per PT
+ * - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries
+ *
+ * Pages
+ * - Size: 4KB
+ *
+ * total PTEs
+ * = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs
+ * = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT
+ * = 262144 (or 256 * 1024)
+ */
+#define PGDIR_SHIFT 26
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD 64
+
+#define PUD_SHIFT 26
+#define PTRS_PER_PUD 1
+#define PUD_SIZE (1UL << PUD_SHIFT)
+#define PUD_MASK (~(PUD_SIZE - 1))
+#define PUE_SIZE 256
+
+#define PMD_SHIFT 26
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE - 1))
+#define PTRS_PER_PMD 1
+#define PME_SIZE 256
+
+#define __frv_PT_SIZE 256
+
+#define PTRS_PER_PTE 4096
+
+#define USER_PGDS_IN_LAST_PML4 (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT 26
+#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS (PTRS_PER_PGD - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte)
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pud_ERROR(e) \
+ printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e)))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e))))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) \
+do { \
+ *(pteptr) = (pteval); \
+ asm volatile("dcf %M0" :: "U"(*pteptr)); \
+} while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pud is never bad, and a pud always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+static inline void pgd_clear(pgd_t *pgd) { }
+
+#define pgd_populate(mm, pgd, pud) do { } while (0)
+/*
+ * (puds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pgd(pgdptr, pgdval) \
+do { \
+ memcpy((pgdptr), &(pgdval), sizeof(pgd_t)); \
+ asm volatile("dcf %M0" :: "U"(*(pgdptr))); \
+} while(0)
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+ return (pud_t *) pgd;
+}
+
+#define pgd_page(pgd) (pud_page((pud_t){ pgd }))
+#define pgd_page_vaddr(pgd) (pud_page_vaddr((pud_t){ pgd }))
+
+/*
+ * allocating and freeing a pud is trivial: the 1-entry pud is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pud_alloc_one(mm, address) NULL
+#define pud_free(mm, x) do { } while (0)
+#define __pud_free_tlb(tlb, x) do { } while (0)
+
+/*
+ * The "pud_xxx()" functions here are trivial for a folded two-level
+ * setup: the pmd is never bad, and a pmd always exists (as it's folded
+ * into the pud entry)
+ */
+static inline int pud_none(pud_t pud) { return 0; }
+static inline int pud_bad(pud_t pud) { return 0; }
+static inline int pud_present(pud_t pud) { return 1; }
+static inline void pud_clear(pud_t *pud) { }
+
+#define pud_populate(mm, pmd, pte) do { } while (0)
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pud(pudptr, pudval) set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
+
+#define pud_page(pud) (pmd_page((pmd_t){ pud }))
+#define pud_page_vaddr(pud) (pmd_page_vaddr((pmd_t){ pud }))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd);
+
+#define set_pmd(pmdptr, pmdval) \
+do { \
+ __set_pmd((pmdptr), (pmdval).ste[0]); \
+} while(0)
+
+#define __pmd_index(address) 0
+
+static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address)
+{
+ return (pmd_t *) dir + __pmd_index(address);
+}
+
+#define pte_same(a, b) ((a).pte == (b).pte)
+#define pte_page(x) (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT))))
+#define pte_none(x) (!(x).pte)
+#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define VMALLOC_VMADDR(x) ((unsigned long) (x))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * control flags in AMPR registers and TLB entries
+ */
+#define _PAGE_BIT_PRESENT xAMPRx_V_BIT
+#define _PAGE_BIT_WP DAMPRx_WP_BIT
+#define _PAGE_BIT_NOCACHE xAMPRx_C_BIT
+#define _PAGE_BIT_SUPER xAMPRx_S_BIT
+#define _PAGE_BIT_ACCESSED xAMPRx_RESERVED8_BIT
+#define _PAGE_BIT_DIRTY xAMPRx_M_BIT
+#define _PAGE_BIT_NOTGLOBAL xAMPRx_NG_BIT
+
+#define _PAGE_PRESENT xAMPRx_V
+#define _PAGE_WP DAMPRx_WP
+#define _PAGE_NOCACHE xAMPRx_C
+#define _PAGE_SUPER xAMPRx_S
+#define _PAGE_ACCESSED xAMPRx_RESERVED8 /* accessed if set */
+#define _PAGE_DIRTY xAMPRx_M
+#define _PAGE_NOTGLOBAL xAMPRx_NG
+
+#define _PAGE_RESERVED_MASK (xAMPRx_RESERVED8 | xAMPRx_RESERVED13)
+
+#define _PAGE_FILE 0x002 /* set:pagecache unset:swap */
+#define _PAGE_PROTNONE 0x000 /* If not present */
+
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PGPROT_BASE \
+ (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED)
+
+#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED __pgprot(__PGPROT_BASE)
+#define PAGE_COPY __pgprot(__PGPROT_BASE | _PAGE_WP)
+#define PAGE_READONLY __pgprot(__PGPROT_BASE | _PAGE_WP)
+
+#define __PAGE_KERNEL (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY)
+#define __PAGE_KERNEL_NOCACHE (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE)
+#define __PAGE_KERNEL_RO (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP)
+
+#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL)
+
+#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+
+#define _PAGE_TABLE (_PAGE_PRESENT | xAMPRx_SS_16Kb)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The FR451 can do execute protection by virtue of having separate TLB miss handlers for
+ * instruction access and for data access. However, we don't have enough reserved bits to say
+ * "execute only", so we don't bother. If you can read it, you can execute it and vice versa.
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY
+#define __P101 PAGE_READONLY
+#define __P110 PAGE_COPY
+#define __P111 PAGE_COPY
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY
+#define __S101 PAGE_READONLY
+#define __S110 PAGE_SHARED
+#define __S111 PAGE_SHARED
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'access_ok(VERIFY_WRITE,..)'
+ */
+#undef TEST_ACCESS_OK
+
+#define pte_present(x) (pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
+#define pmd_bad(x) (pmd_val(x) & xAMPRx_SS)
+#define pmd_clear(xp) do { __set_pmd(xp, 0); } while(0)
+
+#define pmd_page_vaddr(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+#endif
+
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte) { return (pte).pte & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return (pte).pte & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte) { return !((pte).pte & _PAGE_WP); }
+static inline int pte_special(pte_t pte) { return 0; }
+
+static inline pte_t pte_mkclean(pte_t pte) { (pte).pte &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { (pte).pte &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte |= _PAGE_WP; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte &= ~_PAGE_WP; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+ int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+ asm volatile("dcf %M0" :: "U"(*ptep));
+ return i;
+}
+
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ unsigned long x = xchg(&ptep->pte, 0);
+ asm volatile("dcf %M0" :: "U"(*ptep));
+ return __pte(x);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ set_bit(_PAGE_BIT_WP, ptep);
+ asm volatile("dcf %M0" :: "U"(*ptep));
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable"
+ */
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) pfn_pte((physpage) >> PAGE_SHIFT, pgprot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte.pte &= _PAGE_CHG_MASK;
+ pte.pte |= pgprot_val(newprot);
+ return pte;
+}
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_index_k(addr) pgd_index(addr)
+
+/* Find an entry in the bottom-level page table.. */
+#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+
+#if defined(CONFIG_HIGHPTE)
+#define pte_offset_map(dir, address) \
+ ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
+#define pte_offset_map_nested(dir, address) \
+ ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
+#else
+#define pte_offset_map(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/*
+ * Handle swap and file entries
+ * - the PTE is encoded in the following format:
+ * bit 0: Must be 0 (!_PAGE_PRESENT)
+ * bit 1: Type: 0 for swap, 1 for file (_PAGE_FILE)
+ * bits 2-7: Swap type
+ * bits 8-31: Swap offset
+ * bits 2-31: File pgoff
+ */
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
+#define __swp_offset(x) ((x).val >> 8)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte)
+{
+ return pte.pte & _PAGE_FILE;
+}
+
+#define PTE_FILE_MAX_BITS 29
+
+#define pte_to_pgoff(PTE) ((PTE).pte >> 2)
+#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define PageSkip(page) (0)
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+/*
+ * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
+{
+ struct mm_struct *mm;
+ unsigned long ampr;
+
+ mm = current->mm;
+ if (mm) {
+ pgd_t *pge = pgd_offset(mm, address);
+ pud_t *pue = pud_offset(pge, address);
+ pmd_t *pme = pmd_offset(pue, address);
+
+ ampr = pme->ste[0] & 0xffffff00;
+ ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
+ xAMPRx_V;
+ } else {
+ address = ULONG_MAX;
+ ampr = 0;
+ }
+
+ asm volatile("movgs %0,scr0\n"
+ "movgs %0,scr1\n"
+ "movgs %1,dampr4\n"
+ "movgs %1,dampr5\n"
+ :
+ : "r"(address), "r"(ampr)
+ );
+}
+
+#ifdef CONFIG_PROC_FS
+extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer);
+#endif
+
+extern void __init pgtable_cache_init(void);
+
+#endif /* !__ASSEMBLY__ */
+#endif /* !CONFIG_MMU */
+
+#ifndef __ASSEMBLY__
+extern void __init paging_init(void);
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
--- /dev/null
+#ifndef _ASM_POLL_H
+#define _ASM_POLL_H
+
+#define POLLWRNORM POLLOUT
+#define POLLWRBAND 256
+
+#include <asm-generic/poll.h>
+
+#undef POLLREMOVE
+
+#endif
+
--- /dev/null
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) */
+
+#endif
+
--- /dev/null
+/* processor.h: FRV processor definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/mem-layout.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/sections.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/registers.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/cache.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ */
+struct cpuinfo_frv {
+#ifdef CONFIG_MMU
+ unsigned long *pgd_quick;
+ unsigned long *pte_quick;
+ unsigned long pgtable_cache_sz;
+#endif
+} __cacheline_aligned;
+
+extern struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+
+/*
+ * Bus types
+ */
+#define EISA_bus 0
+#define MCA_bus 0
+
+struct thread_struct {
+ struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */
+ struct task_struct *curr; /* [GR29] current pointer for this thread */
+ unsigned long sp; /* [GR1 ] kernel stack pointer */
+ unsigned long fp; /* [GR2 ] kernel frame pointer */
+ unsigned long lr; /* link register */
+ unsigned long pc; /* program counter */
+ unsigned long gr[12]; /* [GR16-GR27] */
+ unsigned long sched_lr; /* LR from schedule() */
+
+ union {
+ struct pt_regs *frame0; /* top (user) stack frame */
+ struct user_context *user; /* userspace context */
+ };
+} __attribute__((aligned(8)));
+
+extern struct pt_regs *__kernel_frame0_ptr;
+extern struct task_struct *__kernel_current_task;
+
+#endif
+
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_FRAME0 \
+ ((struct pt_regs *) \
+ (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context)))
+
+#define INIT_THREAD { \
+ NULL, \
+ (struct task_struct *) init_stack, \
+ 0, 0, 0, 0, \
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
+ 0, \
+ { INIT_THREAD_FRAME0 }, \
+}
+
+/*
+ * do necessary setup to start up a newly executed thread.
+ * - need to discard the frame stacked by init() invoking the execve syscall
+ */
+#define start_thread(_regs, _pc, _usp) \
+do { \
+ set_fs(USER_DS); /* reads from user space */ \
+ __frame = __kernel_frame0_ptr; \
+ __frame->pc = (_pc); \
+ __frame->psr &= ~PSR_S; \
+ __frame->sp = (_usp); \
+} while(0)
+
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+extern asmlinkage void save_user_regs(struct user_context *target);
+extern asmlinkage void *restore_user_regs(const struct user_context *target, ...);
+
+#define copy_segments(tsk, mm) do { } while (0)
+#define release_segments(mm) do { } while (0)
+#define forget_segments() do { } while (0)
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc)
+#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp)
+
+/* Allocation and freeing of basic task resources. */
+extern struct task_struct *alloc_task_struct(void);
+extern void free_task_struct(struct task_struct *p);
+
+#define cpu_relax() barrier()
+
+/* data cache prefetch */
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *x)
+{
+ asm volatile("dcpl %0,gr0,#0" : : "r"(x));
+}
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_PROCESSOR_H */
--- /dev/null
+/* ptrace.h: ptrace() relevant definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#include <asm/registers.h>
+#ifdef __KERNEL__
+#include <asm/irq_regs.h>
+
+#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
+#endif
+
+
+#define PT_PSR 0
+#define PT_ISR 1
+#define PT_CCR 2
+#define PT_CCCR 3
+#define PT_LR 4
+#define PT_LCR 5
+#define PT_PC 6
+
+#define PT__STATUS 7 /* exception status */
+#define PT_SYSCALLNO 8 /* syscall number or -1 */
+#define PT_ORIG_GR8 9 /* saved GR8 for signal handling */
+#define PT_GNER0 10
+#define PT_GNER1 11
+#define PT_IACC0H 12
+#define PT_IACC0L 13
+
+#define PT_GR(j) ( 14 + (j)) /* GRj for 0<=j<=63 */
+#define PT_FR(j) ( 78 + (j)) /* FRj for 0<=j<=63 */
+#define PT_FNER(j) (142 + (j)) /* FNERj for 0<=j<=1 */
+#define PT_MSR(j) (144 + (j)) /* MSRj for 0<=j<=2 */
+#define PT_ACC(j) (146 + (j)) /* ACCj for 0<=j<=7 */
+#define PT_ACCG(jklm) (154 + (jklm)) /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
+#define PT_FSR(j) (156 + (j)) /* FSRj for 0<=j<=0 */
+#define PT__GPEND 78
+#define PT__END 157
+
+#define PT_TBR PT_GR(0)
+#define PT_SP PT_GR(1)
+#define PT_FP PT_GR(2)
+#define PT_PREV_FRAME PT_GR(28) /* previous exception frame pointer (old gr28 value) */
+#define PT_CURR_TASK PT_GR(29) /* current task */
+
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/*
+ * we dedicate GR28 to keeping a pointer to the current exception frame
+ * - gr28 is destroyed on entry to the kernel from userspace
+ */
+register struct pt_regs *__frame asm("gr28");
+
+#define user_mode(regs) (!((regs)->psr & PSR_S))
+#define instruction_pointer(regs) ((regs)->pc)
+
+extern unsigned long user_stack(const struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#define profile_pc(regs) ((regs)->pc)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_PTRACE_H */
--- /dev/null
+/* registers.h: register frame declarations
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * notes:
+ *
+ * (1) that the members of all these structures are carefully aligned to permit
+ * usage of STD/STDF instructions
+ *
+ * (2) if you change these structures, you must change the code in
+ * arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c}
+ *
+ *
+ * the kernel stack space block looks like this:
+ *
+ * +0x2000 +----------------------
+ * | union {
+ * | struct frv_frame0 {
+ * | struct user_context {
+ * | struct user_int_regs
+ * | struct user_fpmedia_regs
+ * | }
+ * | struct frv_debug_regs
+ * | }
+ * | struct pt_regs [user exception]
+ * | }
+ * +---------------------- <-- __kernel_frame0_ptr (maybe GR28)
+ * |
+ * | kernel stack
+ * |
+ * |......................
+ * | struct pt_regs [kernel exception]
+ * |...................... <-- __kernel_frame0_ptr (maybe GR28)
+ * |
+ * | kernel stack
+ * |
+ * |...................... <-- stack pointer (GR1)
+ * |
+ * | unused stack space
+ * |
+ * +----------------------
+ * | struct thread_info
+ * +0x0000 +---------------------- <-- __current_thread_info (GR15);
+ *
+ * note that GR28 points to the current exception frame
+ */
+
+#ifndef _ASM_REGISTERS_H
+#define _ASM_REGISTERS_H
+
+#ifndef __ASSEMBLY__
+#define __OFFSET(X,N) ((X)+(N)*4)
+#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx
+#else
+#define __OFFSET(X,N) ((X)+(N)*4)
+#define __OFFSETC(X,N) ((X)+(N))
+#endif
+
+/*****************************************************************************/
+/*
+ * Exception/Interrupt frame
+ * - held on kernel stack
+ * - 8-byte aligned on stack (old SP is saved in frame)
+ * - GR0 is fixed 0, so we don't save it
+ */
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+ unsigned long psr; /* Processor Status Register */
+ unsigned long isr; /* Integer Status Register */
+ unsigned long ccr; /* Condition Code Register */
+ unsigned long cccr; /* Condition Code for Conditional Insns Register */
+ unsigned long lr; /* Link Register */
+ unsigned long lcr; /* Loop Count Register */
+ unsigned long pc; /* Program Counter Register */
+ unsigned long __status; /* exception status */
+ unsigned long syscallno; /* syscall number or -1 */
+ unsigned long orig_gr8; /* original syscall arg #1 */
+ unsigned long gner0;
+ unsigned long gner1;
+ unsigned long long iacc0;
+ unsigned long tbr; /* GR0 is fixed zero, so we use this for TBR */
+ unsigned long sp; /* GR1: USP/KSP */
+ unsigned long fp; /* GR2: FP */
+ unsigned long gr3;
+ unsigned long gr4;
+ unsigned long gr5;
+ unsigned long gr6;
+ unsigned long gr7; /* syscall number */
+ unsigned long gr8; /* 1st syscall param; syscall return */
+ unsigned long gr9; /* 2nd syscall param */
+ unsigned long gr10; /* 3rd syscall param */
+ unsigned long gr11; /* 4th syscall param */
+ unsigned long gr12; /* 5th syscall param */
+ unsigned long gr13; /* 6th syscall param */
+ unsigned long gr14;
+ unsigned long gr15;
+ unsigned long gr16; /* GP pointer */
+ unsigned long gr17; /* small data */
+ unsigned long gr18; /* PIC/PID */
+ unsigned long gr19;
+ unsigned long gr20;
+ unsigned long gr21;
+ unsigned long gr22;
+ unsigned long gr23;
+ unsigned long gr24;
+ unsigned long gr25;
+ unsigned long gr26;
+ unsigned long gr27;
+ struct pt_regs *next_frame; /* GR28 - next exception frame */
+ unsigned long gr29; /* GR29 - OS reserved */
+ unsigned long gr30; /* GR30 - OS reserved */
+ unsigned long gr31; /* GR31 - OS reserved */
+} __attribute__((aligned(8)));
+
+#endif
+
+#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */
+#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */
+#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */
+#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */
+#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */
+
+#define REG_GR(R) __OFFSET(REG_GR0, (R))
+
+#define REG_SP REG_GR(1)
+#define REG_FP REG_GR(2)
+#define REG_PREV_FRAME REG_GR(28) /* previous exception frame pointer (old gr28 value) */
+#define REG_CURR_TASK REG_GR(29) /* current task */
+
+/*****************************************************************************/
+/*
+ * debugging registers
+ */
+#ifndef __ASSEMBLY__
+
+struct frv_debug_regs
+{
+ unsigned long dcr;
+ unsigned long ibar[4] __attribute__((aligned(8)));
+ unsigned long dbar[4] __attribute__((aligned(8)));
+ unsigned long dbdr[4][4] __attribute__((aligned(8)));
+ unsigned long dbmr[4][4] __attribute__((aligned(8)));
+} __attribute__((aligned(8)));
+
+#endif
+
+/*****************************************************************************/
+/*
+ * userspace registers
+ */
+#ifndef __ASSEMBLY__
+
+struct user_int_regs
+{
+ /* integer registers
+ * - up to gr[31] mirror pt_regs
+ * - total size must be multiple of 8 bytes
+ */
+ unsigned long psr; /* Processor Status Register */
+ unsigned long isr; /* Integer Status Register */
+ unsigned long ccr; /* Condition Code Register */
+ unsigned long cccr; /* Condition Code for Conditional Insns Register */
+ unsigned long lr; /* Link Register */
+ unsigned long lcr; /* Loop Count Register */
+ unsigned long pc; /* Program Counter Register */
+ unsigned long __status; /* exception status */
+ unsigned long syscallno; /* syscall number or -1 */
+ unsigned long orig_gr8; /* original syscall arg #1 */
+ unsigned long gner[2];
+ unsigned long long iacc[1];
+
+ union {
+ unsigned long tbr;
+ unsigned long gr[64];
+ };
+};
+
+struct user_fpmedia_regs
+{
+ /* FP/Media registers */
+ unsigned long fr[64];
+ unsigned long fner[2];
+ unsigned long msr[2];
+ unsigned long acc[8];
+ unsigned char accg[8];
+ unsigned long fsr[1];
+};
+
+struct user_context
+{
+ struct user_int_regs i;
+ struct user_fpmedia_regs f;
+
+ /* we provide a context extension so that we can save the regs for CPUs that
+ * implement many more of Fujitsu's lavish register spec
+ */
+ void *extension;
+} __attribute__((aligned(8)));
+
+struct frv_frame0 {
+ union {
+ struct pt_regs regs;
+ struct user_context uc;
+ };
+
+ struct frv_debug_regs debug;
+
+} __attribute__((aligned(32)));
+
+#endif
+
+#define __INT_GR(R) __OFFSET(__INT_GR0, (R))
+
+#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R))
+#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R))
+#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R))
+#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R))
+#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R))
+#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R))
+
+#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16)
+
+#endif /* _ASM_REGISTERS_H */
--- /dev/null
+#ifndef _ASM_RESOURCE_H
+#define _ASM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_RESOURCE_H */
+
--- /dev/null
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_buf(sg, some_ptr, length);
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffffUL)
+
+#endif /* !_ASM_SCATTERLIST_H */
--- /dev/null
+/* sections.h: linkage layout variables
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SECTIONS_H
+#define _ASM_SECTIONS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm-generic/sections.h>
+
+#ifdef __KERNEL__
+
+/*
+ * we don't want to put variables in the GP-REL section if they're not used very much - that would
+ * be waste since GP-REL addressing is limited to GP16+/-2048
+ */
+#define __nongpreldata __attribute__((section(".data")))
+#define __nongprelbss __attribute__((section(".bss")))
+
+/*
+ * linker symbols
+ */
+extern const void __kernel_image_start, __kernel_image_end, __page_offset;
+
+extern unsigned long __nongprelbss memory_start;
+extern unsigned long __nongprelbss memory_end;
+extern unsigned long __nongprelbss rom_length;
+
+/* determine if we're running from ROM */
+static inline int is_in_rom(unsigned long addr)
+{
+ return 0; /* default case: not in ROM */
+}
+
+#endif
+#endif
+#endif /* _ASM_SECTIONS_H */
--- /dev/null
+/* segment.h: MMU segment settings
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL)
+
+#ifdef CONFIG_MMU
+#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
+#else
+#define USER_DS KERNEL_DS
+#endif
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (__current_thread_info->addr_limit)
+#define segment_eq(a,b) ((a).seg == (b).seg)
+#define __kernel_ds_p() segment_eq(get_fs(), KERNEL_DS)
+#define get_addr_limit() (get_fs().seg)
+
+#define set_fs(_x) \
+do { \
+ __current_thread_info->addr_limit = (_x); \
+} while(0)
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_SEGMENT_H */
--- /dev/null
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
+
--- /dev/null
+/* serial-regs.h: serial port registers
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <linux/serial_reg.h>
+#include <asm/irc-regs.h>
+
+#define SERIAL_ICLK 33333333 /* the target serial input clock */
+#define UART0_BASE 0xfeff9c00
+#define UART1_BASE 0xfeff9c40
+
+#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; })
+#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; })
+#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0)
+#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0)
+
+#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); })
+#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); })
+
+#define __set_UART0_IER(V) __set_UART0(UART_IER,(V))
+#define __set_UART1_IER(V) __set_UART1(UART_IER,(V))
+
+/* serial prescaler select register */
+#define __get_UCPSR() ({ *(volatile unsigned long *)(0xfeff9c90); })
+#define __set_UCPSR(V) do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0)
+#define UCPSR_SELECT0 0x07000000
+#define UCPSR_SELECT1 0x38000000
+
+/* serial prescaler base value register */
+#define __get_UCPVR() ({ *(volatile unsigned long *)(0xfeff9c98); mb(); })
+#define __set_UCPVR(V) do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0)
+
+
+#endif /* _ASM_SERIAL_REGS_H */
--- /dev/null
+/*
+ * serial.h
+ *
+ * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/)
+ * Author: Bernardo Innocenti <bernie@codewiz.org>
+ *
+ * Based on linux/include/asm-i386/serial.h
+ */
+#include <asm/serial-regs.h>
+
+/*
+ * the base baud is derived from the clock speed and so is variable
+ */
+#define BASE_BAUD 0
+
+#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
+
+#define SERIAL_PORT_DFNS
--- /dev/null
+/* setup.h: setup stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+#define COMMAND_LINE_SIZE 512
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
+extern unsigned long __initdata num_mappedpages;
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SETUP_H */
--- /dev/null
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for FR-V architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
+
--- /dev/null
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
+
--- /dev/null
+/* sigcontext.h: FRV signal context
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+#include <asm/registers.h>
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked. Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+ struct user_context sc_context;
+ unsigned long sc_oldmask; /* old sigmask */
+} __attribute__((aligned(8)));
+
+#endif
--- /dev/null
+#ifndef _ASM_SIGINFO_H
+#define _ASM_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#define FPE_MDAOVF (__SI_FAULT|9) /* media overflow */
+#undef NSIGFPE
+#define NSIGFPE 9
+
+#endif
+
--- /dev/null
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
--- /dev/null
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+#endif
--- /dev/null
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
+#endif /* _ASM_SOCKET_H */
+
--- /dev/null
+#ifndef _ASM_SOCKIOS__
+#define _ASM_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS__ */
+
--- /dev/null
+/* spinlock.h: spinlocks for FR-V
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error no spinlocks for FR-V yet
+
+#endif /* _ASM_SPINLOCK_H */
--- /dev/null
+/* spr-regs.h: special-purpose registers on the FRV
+ *
+ * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SPR_REGS_H
+#define _ASM_SPR_REGS_H
+
+/*
+ * PSR - Processor Status Register
+ */
+#define PSR_ET 0x00000001 /* enable interrupts/exceptions flag */
+#define PSR_PS 0x00000002 /* previous supervisor mode flag */
+#define PSR_S 0x00000004 /* supervisor mode flag */
+#define PSR_PIL 0x00000078 /* processor external interrupt level */
+#define PSR_PIL_0 0x00000000 /* - no interrupt in progress */
+#define PSR_PIL_13 0x00000068 /* - debugging only */
+#define PSR_PIL_14 0x00000070 /* - debugging in progress */
+#define PSR_PIL_15 0x00000078 /* - NMI in progress */
+#define PSR_EM 0x00000080 /* enable media operation */
+#define PSR_EF 0x00000100 /* enable FPU operation */
+#define PSR_BE 0x00001000 /* endianness mode */
+#define PSR_BE_LE 0x00000000 /* - little endian mode */
+#define PSR_BE_BE 0x00001000 /* - big endian mode */
+#define PSR_CM 0x00002000 /* conditional mode */
+#define PSR_NEM 0x00004000 /* non-excepting mode */
+#define PSR_ICE 0x00010000 /* in-circuit emulation mode */
+#define PSR_VERSION_SHIFT 24 /* CPU silicon ID */
+#define PSR_IMPLE_SHIFT 28 /* CPU core ID */
+
+#define PSR_VERSION(psr) (((psr) >> PSR_VERSION_SHIFT) & 0xf)
+#define PSR_IMPLE(psr) (((psr) >> PSR_IMPLE_SHIFT) & 0xf)
+
+#define PSR_IMPLE_FR401 0x2
+#define PSR_VERSION_FR401_MB93401 0x0
+#define PSR_VERSION_FR401_MB93401A 0x1
+#define PSR_VERSION_FR401_MB93403 0x2
+
+#define PSR_IMPLE_FR405 0x4
+#define PSR_VERSION_FR405_MB93405 0x0
+
+#define PSR_IMPLE_FR451 0x5
+#define PSR_VERSION_FR451_MB93451 0x0
+
+#define PSR_IMPLE_FR501 0x1
+#define PSR_VERSION_FR501_MB93501 0x1
+#define PSR_VERSION_FR501_MB93501A 0x2
+
+#define PSR_IMPLE_FR551 0x3
+#define PSR_VERSION_FR551_MB93555 0x1
+
+#define __get_PSR() ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; })
+#define __set_PSR(V) do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0)
+
+/*
+ * TBR - Trap Base Register
+ */
+#define TBR_TT 0x00000ff0
+#define TBR_TT_INSTR_MMU_MISS (0x01 << 4)
+#define TBR_TT_INSTR_ACC_ERROR (0x02 << 4)
+#define TBR_TT_INSTR_ACC_EXCEP (0x03 << 4)
+#define TBR_TT_PRIV_INSTR (0x06 << 4)
+#define TBR_TT_ILLEGAL_INSTR (0x07 << 4)
+#define TBR_TT_FP_EXCEPTION (0x0d << 4)
+#define TBR_TT_MP_EXCEPTION (0x0e << 4)
+#define TBR_TT_DATA_ACC_ERROR (0x11 << 4)
+#define TBR_TT_DATA_MMU_MISS (0x12 << 4)
+#define TBR_TT_DATA_ACC_EXCEP (0x13 << 4)
+#define TBR_TT_DATA_STR_ERROR (0x14 << 4)
+#define TBR_TT_DIVISION_EXCEP (0x17 << 4)
+#define TBR_TT_COMMIT_EXCEP (0x19 << 4)
+#define TBR_TT_INSTR_TLB_MISS (0x1a << 4)
+#define TBR_TT_DATA_TLB_MISS (0x1b << 4)
+#define TBR_TT_DATA_DAT_EXCEP (0x1d << 4)
+#define TBR_TT_DECREMENT_TIMER (0x1f << 4)
+#define TBR_TT_COMPOUND_EXCEP (0x20 << 4)
+#define TBR_TT_INTERRUPT_1 (0x21 << 4)
+#define TBR_TT_INTERRUPT_2 (0x22 << 4)
+#define TBR_TT_INTERRUPT_3 (0x23 << 4)
+#define TBR_TT_INTERRUPT_4 (0x24 << 4)
+#define TBR_TT_INTERRUPT_5 (0x25 << 4)
+#define TBR_TT_INTERRUPT_6 (0x26 << 4)
+#define TBR_TT_INTERRUPT_7 (0x27 << 4)
+#define TBR_TT_INTERRUPT_8 (0x28 << 4)
+#define TBR_TT_INTERRUPT_9 (0x29 << 4)
+#define TBR_TT_INTERRUPT_10 (0x2a << 4)
+#define TBR_TT_INTERRUPT_11 (0x2b << 4)
+#define TBR_TT_INTERRUPT_12 (0x2c << 4)
+#define TBR_TT_INTERRUPT_13 (0x2d << 4)
+#define TBR_TT_INTERRUPT_14 (0x2e << 4)
+#define TBR_TT_INTERRUPT_15 (0x2f << 4)
+#define TBR_TT_TRAP0 (0x80 << 4)
+#define TBR_TT_TRAP1 (0x81 << 4)
+#define TBR_TT_TRAP2 (0x82 << 4)
+#define TBR_TT_TRAP3 (0x83 << 4)
+#define TBR_TT_TRAP120 (0xf8 << 4)
+#define TBR_TT_TRAP121 (0xf9 << 4)
+#define TBR_TT_TRAP122 (0xfa << 4)
+#define TBR_TT_TRAP123 (0xfb << 4)
+#define TBR_TT_TRAP124 (0xfc << 4)
+#define TBR_TT_TRAP125 (0xfd << 4)
+#define TBR_TT_TRAP126 (0xfe << 4)
+#define TBR_TT_BREAK (0xff << 4)
+
+#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120
+#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121
+#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122
+#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123
+#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124
+#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125
+#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126
+
+#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
+
+/*
+ * HSR0 - Hardware Status Register 0
+ */
+#define HSR0_PDM 0x00000007 /* power down mode */
+#define HSR0_PDM_NORMAL 0x00000000 /* - normal mode */
+#define HSR0_PDM_CORE_SLEEP 0x00000001 /* - CPU core sleep mode */
+#define HSR0_PDM_BUS_SLEEP 0x00000003 /* - bus sleep mode */
+#define HSR0_PDM_PLL_RUN 0x00000005 /* - PLL run */
+#define HSR0_PDM_PLL_STOP 0x00000007 /* - PLL stop */
+#define HSR0_GRLE 0x00000040 /* GR lower register set enable */
+#define HSR0_GRHE 0x00000080 /* GR higher register set enable */
+#define HSR0_FRLE 0x00000100 /* FR lower register set enable */
+#define HSR0_FRHE 0x00000200 /* FR higher register set enable */
+#define HSR0_GRN 0x00000400 /* GR quantity */
+#define HSR0_GRN_64 0x00000000 /* - 64 GR registers */
+#define HSR0_GRN_32 0x00000400 /* - 32 GR registers */
+#define HSR0_FRN 0x00000800 /* FR quantity */
+#define HSR0_FRN_64 0x00000000 /* - 64 FR registers */
+#define HSR0_FRN_32 0x00000800 /* - 32 FR registers */
+#define HSR0_SA 0x00001000 /* start address (RAMBOOT#) */
+#define HSR0_ETMI 0x00008000 /* enable TIMERI (64-bit up timer) */
+#define HSR0_ETMD 0x00004000 /* enable TIMERD (32-bit down timer) */
+#define HSR0_PEDAT 0x00010000 /* previous DAT mode */
+#define HSR0_XEDAT 0x00020000 /* exception DAT mode */
+#define HSR0_EDAT 0x00080000 /* enable DAT mode */
+#define HSR0_RME 0x00400000 /* enable RAM mode */
+#define HSR0_EMEM 0x00800000 /* enable MMU_Miss mask */
+#define HSR0_EXMMU 0x01000000 /* enable extended MMU mode */
+#define HSR0_EDMMU 0x02000000 /* enable data MMU */
+#define HSR0_EIMMU 0x04000000 /* enable instruction MMU */
+#define HSR0_CBM 0x08000000 /* copy back mode */
+#define HSR0_CBM_WRITE_THRU 0x00000000 /* - write through */
+#define HSR0_CBM_COPY_BACK 0x08000000 /* - copy back */
+#define HSR0_NWA 0x10000000 /* no write allocate */
+#define HSR0_DCE 0x40000000 /* data cache enable */
+#define HSR0_ICE 0x80000000 /* instruction cache enable */
+
+#define __get_HSR(R) ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; })
+#define __set_HSR(R,V) do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0)
+
+/*
+ * CCR - Condition Codes Register
+ */
+#define CCR_FCC0 0x0000000f /* FP/Media condition 0 (fcc0 reg) */
+#define CCR_FCC1 0x000000f0 /* FP/Media condition 1 (fcc1 reg) */
+#define CCR_FCC2 0x00000f00 /* FP/Media condition 2 (fcc2 reg) */
+#define CCR_FCC3 0x0000f000 /* FP/Media condition 3 (fcc3 reg) */
+#define CCR_ICC0 0x000f0000 /* Integer condition 0 (icc0 reg) */
+#define CCR_ICC0_C 0x00010000 /* - Carry flag */
+#define CCR_ICC0_V 0x00020000 /* - Overflow flag */
+#define CCR_ICC0_Z 0x00040000 /* - Zero flag */
+#define CCR_ICC0_N 0x00080000 /* - Negative flag */
+#define CCR_ICC1 0x00f00000 /* Integer condition 1 (icc1 reg) */
+#define CCR_ICC2 0x0f000000 /* Integer condition 2 (icc2 reg) */
+#define CCR_ICC3 0xf0000000 /* Integer condition 3 (icc3 reg) */
+
+/*
+ * CCCR - Condition Codes for Conditional Instructions Register
+ */
+#define CCCR_CC0 0x00000003 /* condition 0 (cc0 reg) */
+#define CCCR_CC0_FALSE 0x00000002 /* - condition is false */
+#define CCCR_CC0_TRUE 0x00000003 /* - condition is true */
+#define CCCR_CC1 0x0000000c /* condition 1 (cc1 reg) */
+#define CCCR_CC2 0x00000030 /* condition 2 (cc2 reg) */
+#define CCCR_CC3 0x000000c0 /* condition 3 (cc3 reg) */
+#define CCCR_CC4 0x00000300 /* condition 4 (cc4 reg) */
+#define CCCR_CC5 0x00000c00 /* condition 5 (cc5 reg) */
+#define CCCR_CC6 0x00003000 /* condition 6 (cc6 reg) */
+#define CCCR_CC7 0x0000c000 /* condition 7 (cc7 reg) */
+
+/*
+ * ISR - Integer Status Register
+ */
+#define ISR_EMAM 0x00000001 /* memory misaligned access handling */
+#define ISR_EMAM_EXCEPTION 0x00000000 /* - generate exception */
+#define ISR_EMAM_FUDGE 0x00000001 /* - mask out invalid address bits */
+#define ISR_AEXC 0x00000004 /* accrued [overflow] exception */
+#define ISR_DTT 0x00000018 /* division type trap */
+#define ISR_DTT_IGNORE 0x00000000 /* - ignore division error */
+#define ISR_DTT_DIVBYZERO 0x00000008 /* - generate exception */
+#define ISR_DTT_OVERFLOW 0x00000010 /* - record overflow */
+#define ISR_EDE 0x00000020 /* enable division exception */
+#define ISR_PLI 0x20000000 /* pre-load instruction information */
+#define ISR_QI 0x80000000 /* quad data implementation information */
+
+/*
+ * EPCR0 - Exception PC Register
+ */
+#define EPCR0_V 0x00000001 /* register content validity indicator */
+#define EPCR0_PC 0xfffffffc /* faulting instruction address */
+
+/*
+ * ESR0/14/15 - Exception Status Register
+ */
+#define ESRx_VALID 0x00000001 /* register content validity indicator */
+#define ESRx_EC 0x0000003e /* exception type */
+#define ESRx_EC_DATA_STORE 0x00000000 /* - data_store_error */
+#define ESRx_EC_INSN_ACCESS 0x00000006 /* - instruction_access_error */
+#define ESRx_EC_PRIV_INSN 0x00000008 /* - privileged_instruction */
+#define ESRx_EC_ILL_INSN 0x0000000a /* - illegal_instruction */
+#define ESRx_EC_MP_EXCEP 0x0000001c /* - mp_exception */
+#define ESRx_EC_DATA_ACCESS 0x00000020 /* - data_access_error */
+#define ESRx_EC_DIVISION 0x00000026 /* - division_exception */
+#define ESRx_EC_ITLB_MISS 0x00000034 /* - instruction_access_TLB_miss */
+#define ESRx_EC_DTLB_MISS 0x00000036 /* - data_access_TLB_miss */
+#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a /* - data_access_DAT_exception */
+
+#define ESR0_IAEC 0x00000100 /* info for instruction-access-exception */
+#define ESR0_IAEC_RESV 0x00000000 /* - reserved */
+#define ESR0_IAEC_PROT_VIOL 0x00000100 /* - protection violation */
+
+#define ESR0_ATXC 0x00f00000 /* address translation exception code */
+#define ESR0_ATXC_MMU_MISS 0x00000000 /* - MMU miss exception and more (?) */
+#define ESR0_ATXC_MULTI_DAT 0x00800000 /* - multiple DAT entry hit */
+#define ESR0_ATXC_MULTI_SAT 0x00900000 /* - multiple SAT entry hit */
+#define ESR0_ATXC_AMRTLB_MISS 0x00a00000 /* - MMU/TLB miss exception */
+#define ESR0_ATXC_PRIV_EXCEP 0x00c00000 /* - privilege protection fault */
+#define ESR0_ATXC_WP_EXCEP 0x00d00000 /* - write protection fault */
+
+#define ESR0_EAV 0x00000800 /* true if EAR0 register valid */
+#define ESR15_EAV 0x00000800 /* true if EAR15 register valid */
+
+/*
+ * ESFR1 - Exception Status Valid Flag Register
+ */
+#define ESFR1_ESR0 0x00000001 /* true if ESR0 is valid */
+#define ESFR1_ESR14 0x00004000 /* true if ESR14 is valid */
+#define ESFR1_ESR15 0x00008000 /* true if ESR15 is valid */
+
+/*
+ * MSR - Media Status Register
+ */
+#define MSR0_AOVF 0x00000001 /* overflow exception accrued */
+#define MSRx_OVF 0x00000002 /* overflow exception detected */
+#define MSRx_SIE 0x0000003c /* last SIMD instruction exception detected */
+#define MSRx_SIE_NONE 0x00000000 /* - none detected */
+#define MSRx_SIE_FRkHI_ACCk 0x00000020 /* - exception at FRkHI or ACCk */
+#define MSRx_SIE_FRkLO_ACCk1 0x00000010 /* - exception at FRkLO or ACCk+1 */
+#define MSRx_SIE_FRk1HI_ACCk2 0x00000008 /* - exception at FRk+1HI or ACCk+2 */
+#define MSRx_SIE_FRk1LO_ACCk3 0x00000004 /* - exception at FRk+1LO or ACCk+3 */
+#define MSR0_MTT 0x00007000 /* type of last media trap detected */
+#define MSR0_MTT_NONE 0x00000000 /* - none detected */
+#define MSR0_MTT_OVERFLOW 0x00001000 /* - overflow detected */
+#define MSR0_HI 0x00c00000 /* hardware implementation */
+#define MSR0_HI_ROUNDING 0x00000000 /* - rounding mode */
+#define MSR0_HI_NONROUNDING 0x00c00000 /* - non-rounding mode */
+#define MSR0_EMCI 0x01000000 /* enable media custom instructions */
+#define MSR0_SRDAV 0x10000000 /* select rounding mode of MAVEH */
+#define MSR0_SRDAV_RDAV 0x00000000 /* - controlled by MSR.RDAV */
+#define MSR0_SRDAV_RD 0x10000000 /* - controlled by MSR.RD */
+#define MSR0_RDAV 0x20000000 /* rounding mode of MAVEH */
+#define MSR0_RDAV_NEAREST_MI 0x00000000 /* - round to nearest minus */
+#define MSR0_RDAV_NEAREST_PL 0x20000000 /* - round to nearest plus */
+#define MSR0_RD 0xc0000000 /* rounding mode */
+#define MSR0_RD_NEAREST 0x00000000 /* - nearest */
+#define MSR0_RD_ZERO 0x40000000 /* - zero */
+#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */
+#define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */
+
+/*
+ * IAMPR0-7 - Instruction Address Mapping Register
+ * DAMPR0-7 - Data Address Mapping Register
+ */
+#define xAMPRx_V 0x00000001 /* register content validity indicator */
+#define DAMPRx_WP 0x00000002 /* write protect */
+#define DAMPRx_WP_RW 0x00000000 /* - read/write */
+#define DAMPRx_WP_RO 0x00000002 /* - read-only */
+#define xAMPRx_C 0x00000004 /* cached/uncached */
+#define xAMPRx_C_CACHED 0x00000000 /* - cached */
+#define xAMPRx_C_UNCACHED 0x00000004 /* - uncached */
+#define xAMPRx_S 0x00000008 /* supervisor only */
+#define xAMPRx_S_USER 0x00000000 /* - userspace can access */
+#define xAMPRx_S_KERNEL 0x00000008 /* - kernel only */
+#define xAMPRx_SS 0x000000f0 /* segment size */
+#define xAMPRx_SS_16Kb 0x00000000 /* - 16 kilobytes */
+#define xAMPRx_SS_64Kb 0x00000010 /* - 64 kilobytes */
+#define xAMPRx_SS_256Kb 0x00000020 /* - 256 kilobytes */
+#define xAMPRx_SS_1Mb 0x00000030 /* - 1 megabyte */
+#define xAMPRx_SS_2Mb 0x00000040 /* - 2 megabytes */
+#define xAMPRx_SS_4Mb 0x00000050 /* - 4 megabytes */
+#define xAMPRx_SS_8Mb 0x00000060 /* - 8 megabytes */
+#define xAMPRx_SS_16Mb 0x00000070 /* - 16 megabytes */
+#define xAMPRx_SS_32Mb 0x00000080 /* - 32 megabytes */
+#define xAMPRx_SS_64Mb 0x00000090 /* - 64 megabytes */
+#define xAMPRx_SS_128Mb 0x000000a0 /* - 128 megabytes */
+#define xAMPRx_SS_256Mb 0x000000b0 /* - 256 megabytes */
+#define xAMPRx_SS_512Mb 0x000000c0 /* - 512 megabytes */
+#define xAMPRx_RESERVED8 0x00000100 /* reserved bit */
+#define xAMPRx_NG 0x00000200 /* non-global */
+#define xAMPRx_L 0x00000400 /* locked */
+#define xAMPRx_M 0x00000800 /* modified */
+#define xAMPRx_D 0x00001000 /* DAT entry */
+#define xAMPRx_RESERVED13 0x00002000 /* reserved bit */
+#define xAMPRx_PPFN 0xfff00000 /* physical page frame number */
+
+#define xAMPRx_V_BIT 0
+#define DAMPRx_WP_BIT 1
+#define xAMPRx_C_BIT 2
+#define xAMPRx_S_BIT 3
+#define xAMPRx_RESERVED8_BIT 8
+#define xAMPRx_NG_BIT 9
+#define xAMPRx_L_BIT 10
+#define xAMPRx_M_BIT 11
+#define xAMPRx_D_BIT 12
+#define xAMPRx_RESERVED13_BIT 13
+
+#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; })
+
+#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; })
+#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; })
+
+#define __set_IAMPR(R,V) do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0)
+#define __set_DAMPR(R,V) do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0)
+
+#define __set_IAMLR(R,V) do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0)
+#define __set_DAMLR(R,V) do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0)
+
+#define save_dampr(R, _dampr) \
+do { \
+ asm volatile("movsg dampr"R",%0" : "=r"(_dampr)); \
+} while(0)
+
+#define restore_dampr(R, _dampr) \
+do { \
+ asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \
+} while(0)
+
+/*
+ * AMCR - Address Mapping Control Register
+ */
+#define AMCR_IAMRN 0x000000ff /* quantity of IAMPR registers */
+#define AMCR_DAMRN 0x0000ff00 /* quantity of DAMPR registers */
+
+/*
+ * TTBR - Address Translation Table Base Register
+ */
+#define __get_TTBR() ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; })
+
+/*
+ * TPXR - TLB Probe Extend Register
+ */
+#define TPXR_E 0x00000001
+#define TPXR_LMAX_SHIFT 20
+#define TPXR_LMAX_SMASK 0xf
+#define TPXR_WMAX_SHIFT 24
+#define TPXR_WMAX_SMASK 0xf
+#define TPXR_WAY_SHIFT 28
+#define TPXR_WAY_SMASK 0xf
+
+/*
+ * DCR - Debug Control Register
+ */
+#define DCR_IBCE3 0x00000001 /* break on conditional insn pointed to by IBAR3 */
+#define DCR_IBE3 0x00000002 /* break on insn pointed to by IBAR3 */
+#define DCR_IBCE1 0x00000004 /* break on conditional insn pointed to by IBAR2 */
+#define DCR_IBE1 0x00000008 /* break on insn pointed to by IBAR2 */
+#define DCR_IBCE2 0x00000010 /* break on conditional insn pointed to by IBAR1 */
+#define DCR_IBE2 0x00000020 /* break on insn pointed to by IBAR1 */
+#define DCR_IBCE0 0x00000040 /* break on conditional insn pointed to by IBAR0 */
+#define DCR_IBE0 0x00000080 /* break on insn pointed to by IBAR0 */
+
+#define DCR_DDBE1 0x00004000 /* use DBDR1x when checking DBAR1 */
+#define DCR_DWBE1 0x00008000 /* break on store to address in DBAR1/DBMR1x */
+#define DCR_DRBE1 0x00010000 /* break on load from address in DBAR1/DBMR1x */
+#define DCR_DDBE0 0x00020000 /* use DBDR0x when checking DBAR0 */
+#define DCR_DWBE0 0x00040000 /* break on store to address in DBAR0/DBMR0x */
+#define DCR_DRBE0 0x00080000 /* break on load from address in DBAR0/DBMR0x */
+
+#define DCR_EIM 0x0c000000 /* external interrupt disable */
+#define DCR_IBM 0x10000000 /* instruction break disable */
+#define DCR_SE 0x20000000 /* single step enable */
+#define DCR_EBE 0x40000000 /* exception break enable */
+
+/*
+ * BRR - Break Interrupt Request Register
+ */
+#define BRR_ST 0x00000001 /* single-step detected */
+#define BRR_SB 0x00000002 /* break instruction detected */
+#define BRR_BB 0x00000004 /* branch with hint detected */
+#define BRR_CBB 0x00000008 /* branch to LR detected */
+#define BRR_IBx 0x000000f0 /* hardware breakpoint detected */
+#define BRR_DBx 0x00000f00 /* hardware watchpoint detected */
+#define BRR_DBNEx 0x0000f000 /* ? */
+#define BRR_EBTT 0x00ff0000 /* trap type of exception break */
+#define BRR_TB 0x10000000 /* external break request detected */
+#define BRR_CB 0x20000000 /* ICE break command detected */
+#define BRR_EB 0x40000000 /* exception break detected */
+
+/*
+ * BPSR - Break PSR Save Register
+ */
+#define BPSR_BET 0x00000001 /* former PSR.ET */
+#define BPSR_BS 0x00001000 /* former PSR.S */
+
+#endif /* _ASM_SPR_REGS_H */
--- /dev/null
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+/* This matches struct stat in uClibc/glibc. */
+struct stat {
+ unsigned char __pad1[6];
+ unsigned short st_dev;
+
+ unsigned long __pad2;
+ unsigned long st_ino;
+
+ unsigned short __pad3;
+ unsigned short st_mode;
+ unsigned short __pad4;
+ unsigned short st_nlink;
+
+ unsigned short __pad5;
+ unsigned short st_uid;
+ unsigned short __pad6;
+ unsigned short st_gid;
+
+ unsigned char __pad7[6];
+ unsigned short st_rdev;
+
+ unsigned long __pad8;
+ unsigned long st_size;
+
+ unsigned long __pad9; /* align 64-bit st_blocks to 2-word */
+ unsigned long st_blksize;
+
+ unsigned long __pad10; /* future possible st_blocks high bits */
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+
+ unsigned long __unused1;
+ unsigned long st_atime;
+
+ unsigned long __unused2;
+ unsigned long st_mtime;
+
+ unsigned long __unused3;
+ unsigned long st_ctime;
+
+ unsigned long long __unused4;
+};
+
+/* This matches struct stat64 in uClibc/glibc. The layout is exactly
+ the same as that of struct stat above, with 64-bit types taking up
+ space that was formerly used by padding. stat syscalls are still
+ different from stat64, though, in that the former tests for
+ overflow. */
+struct stat64 {
+ unsigned char __pad1[6];
+ unsigned short st_dev;
+
+ unsigned long long st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned char __pad2[6];
+ unsigned short st_rdev;
+
+ long long st_size;
+
+ unsigned long __pad3; /* align 64-bit st_blocks to 2-word */
+ unsigned long st_blksize;
+
+ unsigned long __pad4; /* future possible st_blocks high bits */
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+
+ unsigned long st_atime_nsec;
+ unsigned long st_atime;
+
+ unsigned int st_mtime_nsec;
+ unsigned long st_mtime;
+
+ unsigned long st_ctime_nsec;
+ unsigned long st_ctime;
+
+ unsigned long long __unused4;
+};
+
+#endif /* _ASM_STAT_H */
--- /dev/null
+#ifndef _ASM_STATFS_H
+#define _ASM_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_STATFS_H */
+
--- /dev/null
+/* string.h: FRV string handling
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_STRING_H_
+#define _ASM_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#else /* KERNEL */
+
+/*
+ * let user libraries deal with these,
+ * IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+#endif /* _ASM_STRING_H_ */
--- /dev/null
+/* suspend.h: suspension stuff
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SUSPEND_H
+#define _ASM_SUSPEND_H
+
+static inline int arch_prepare_suspend(void)
+{
+ return 0;
+}
+
+#endif /* _ASM_SUSPEND_H */
--- /dev/null
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* _ASM_SWAB_H */
--- /dev/null
+/* system.h: FR-V CPU control definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+
+struct thread_struct;
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ * The `mb' is to tell GCC not to cache `current' across this call.
+ */
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev_thread,
+ struct thread_struct *next_thread,
+ struct task_struct *prev);
+
+#define switch_to(prev, next, last) \
+do { \
+ (prev)->thread.sched_lr = \
+ (unsigned long) __builtin_return_address(0); \
+ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+ mb(); \
+} while(0)
+
+/*
+ * interrupt flag manipulation
+ * - use virtual interrupt management since touching the PSR is slow
+ * - ICC2.Z: T if interrupts virtually disabled
+ * - ICC2.C: F if interrupts really disabled
+ * - if Z==1 upon interrupt:
+ * - C is set to 0
+ * - interrupts are really disabled
+ * - entry.S returns immediately
+ * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts
+ * - if taken, the trap:
+ * - sets ICC2.C
+ * - enables interrupts
+ */
+#define local_irq_disable() \
+do { \
+ /* set Z flag, but don't change the C flag */ \
+ asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \
+ : \
+ : \
+ : "memory", "icc2" \
+ ); \
+} while(0)
+
+#define local_irq_enable() \
+do { \
+ /* clear Z flag and then test the C flag */ \
+ asm volatile(" oricc gr0,#1,gr0,icc2 \n" \
+ " tihi icc2,gr0,#2 \n" \
+ : \
+ : \
+ : "memory", "icc2" \
+ ); \
+} while(0)
+
+#define local_save_flags(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ asm volatile("movsg ccr,%0" \
+ : "=r"(flags) \
+ : \
+ : "memory"); \
+ \
+ /* shift ICC2.Z to bit 0 */ \
+ flags >>= 26; \
+ \
+ /* make flags 1 if interrupts disabled, 0 otherwise */ \
+ flags &= 1UL; \
+} while(0)
+
+#define irqs_disabled() \
+ ({unsigned long flags; local_save_flags(flags); !!flags; })
+
+#define local_irq_save(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ local_save_flags(flags); \
+ local_irq_disable(); \
+} while(0)
+
+#define local_irq_restore(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ \
+ /* load the Z flag by turning 1 if disabled into 0 if disabled \
+ * and thus setting the Z flag but not the C flag */ \
+ asm volatile(" xoricc %0,#1,gr0,icc2 \n" \
+ /* then test Z=0 and C=0 */ \
+ " tihi icc2,gr0,#2 \n" \
+ : \
+ : "r"(flags) \
+ : "memory", "icc2" \
+ ); \
+ \
+} while(0)
+
+/*
+ * real interrupt flag manipulation
+ */
+#define __local_irq_disable() \
+do { \
+ unsigned long psr; \
+ asm volatile(" movsg psr,%0 \n" \
+ " andi %0,%2,%0 \n" \
+ " ori %0,%1,%0 \n" \
+ " movgs %0,psr \n" \
+ : "=r"(psr) \
+ : "i" (PSR_PIL_14), "i" (~PSR_PIL) \
+ : "memory"); \
+} while(0)
+
+#define __local_irq_enable() \
+do { \
+ unsigned long psr; \
+ asm volatile(" movsg psr,%0 \n" \
+ " andi %0,%1,%0 \n" \
+ " movgs %0,psr \n" \
+ : "=r"(psr) \
+ : "i" (~PSR_PIL) \
+ : "memory"); \
+} while(0)
+
+#define __local_save_flags(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ asm("movsg psr,%0" \
+ : "=r"(flags) \
+ : \
+ : "memory"); \
+} while(0)
+
+#define __local_irq_save(flags) \
+do { \
+ unsigned long npsr; \
+ typecheck(unsigned long, flags); \
+ asm volatile(" movsg psr,%0 \n" \
+ " andi %0,%3,%1 \n" \
+ " ori %1,%2,%1 \n" \
+ " movgs %1,psr \n" \
+ : "=r"(flags), "=r"(npsr) \
+ : "i" (PSR_PIL_14), "i" (~PSR_PIL) \
+ : "memory"); \
+} while(0)
+
+#define __local_irq_restore(flags) \
+do { \
+ typecheck(unsigned long, flags); \
+ asm volatile(" movgs %0,psr \n" \
+ : \
+ : "r" (flags) \
+ : "memory"); \
+} while(0)
+
+#define __irqs_disabled() \
+ ((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
+
+/*
+ * Force strict CPU ordering.
+ */
+#define nop() asm volatile ("nop"::)
+#define mb() asm volatile ("membar" : : :"memory")
+#define rmb() asm volatile ("membar" : : :"memory")
+#define wmb() asm volatile ("membar" : : :"memory")
+#define read_barrier_depends() do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) \
+ do { xchg(&var, (value)); } while (0)
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do {} while(0)
+#define set_mb(var, value) \
+ do { var = (value); barrier(); } while (0)
+#endif
+
+extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2)));
+extern void free_initmem(void);
+
+#define arch_align_stack(x) (x)
+
+/*****************************************************************************/
+/*
+ * compare and conditionally exchange value with memory
+ * - if (*ptr == test) then orig = *ptr; *ptr = test;
+ * - if (*ptr != test) then orig = *ptr;
+ */
+#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
+
+#define cmpxchg(ptr, test, new) \
+({ \
+ __typeof__(ptr) __xg_ptr = (ptr); \
+ __typeof__(*(ptr)) __xg_orig, __xg_tmp; \
+ __typeof__(*(ptr)) __xg_test = (test); \
+ __typeof__(*(ptr)) __xg_new = (new); \
+ \
+ switch (sizeof(__xg_orig)) { \
+ case 4: \
+ asm volatile( \
+ "0: \n" \
+ " orcc gr0,gr0,gr0,icc3 \n" \
+ " ckeq icc3,cc7 \n" \
+ " ld.p %M0,%1 \n" \
+ " orcr cc7,cc7,cc3 \n" \
+ " sub%I4cc %1,%4,%2,icc0 \n" \
+ " bne icc0,#0,1f \n" \
+ " cst.p %3,%M0 ,cc3,#1 \n" \
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" \
+ " beq icc3,#0,0b \n" \
+ "1: \n" \
+ : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp) \
+ : "r"(__xg_new), "NPr"(__xg_test) \
+ : "memory", "cc7", "cc3", "icc3", "icc0" \
+ ); \
+ break; \
+ \
+ default: \
+ __xg_orig = (__typeof__(__xg_orig))0; \
+ asm volatile("break"); \
+ break; \
+ } \
+ \
+ __xg_orig; \
+})
+
+#else
+
+extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new);
+
+#define cmpxchg(ptr, test, new) \
+({ \
+ __typeof__(ptr) __xg_ptr = (ptr); \
+ __typeof__(*(ptr)) __xg_orig; \
+ __typeof__(*(ptr)) __xg_test = (test); \
+ __typeof__(*(ptr)) __xg_new = (new); \
+ \
+ switch (sizeof(__xg_orig)) { \
+ case 4: __xg_orig = (__force __typeof__(*ptr)) \
+ __cmpxchg_32((__force uint32_t *)__xg_ptr, \
+ (__force uint32_t)__xg_test, \
+ (__force uint32_t)__xg_new); break; \
+ default: \
+ __xg_orig = (__typeof__(__xg_orig))0; \
+ asm volatile("break"); \
+ break; \
+ } \
+ \
+ __xg_orig; \
+})
+
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return cmpxchg((unsigned long *)ptr, old, new);
+ default:
+ return __cmpxchg_local_generic(ptr, old, new, size);
+ }
+
+ return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* _ASM_SYSTEM_H */
--- /dev/null
+#ifndef _ASM_TERMBITS_H__
+#define _ASM_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* Input baud rate */
+#define CTVB 004000000000 /* VisioBraille Terminal flow control */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_TERMBITS_H__ */
+
--- /dev/null
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+#include <asm-generic/termios.h>
+#endif
+
+#endif /* _ASM_TERMIOS_H */
--- /dev/null
+/* thread_info.h: description
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/thread_info.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define THREAD_SIZE 8192
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ unsigned long status; /* thread-synchronous flags */
+ __u32 cpu; /* current CPU */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space:
+ * 0-0xBFFFFFFF for user-thead
+ * 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+
+ __u8 supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#include <asm/asm-offsets.h>
+
+#endif
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *__current_thread_info asm("gr15");
+
+#define current_thread_info() ({ __current_thread_info; })
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) \
+ ({ \
+ struct thread_info *ret; \
+ \
+ ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \
+ \
+ ret; \
+ })
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
+#define TIF_IRET 4 /* return with iret */
+#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 17 /* OOM killer killed process */
+#define TIF_FREEZE 18 /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_IRET (1 << TIF_IRET)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPM 0x0001 /* FPU/Media was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
--- /dev/null
+/* timer-regs.h: hardware timer register definitions
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/sections.h>
+
+extern unsigned long __nongprelbss __clkin_clock_speed_HZ;
+extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __res_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __sdram_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_bus_clock_speed_HZ;
+extern unsigned long __nongprelbss __core_clock_speed_HZ;
+extern unsigned long __nongprelbss __dsu_clock_speed_HZ;
+extern unsigned long __nongprelbss __serial_clock_speed_HZ;
+
+#define __get_CLKC() ({ *(volatile unsigned long *)(0xfeff9a00); })
+
+static inline void __set_CLKC(unsigned long v)
+{
+ int tmp;
+
+ asm volatile(" st%I0.p %2,%M0 \n"
+ " setlos %3,%1 \n"
+ " membar \n"
+ "0: \n"
+ " subicc %1,#1,%1,icc0 \n"
+ " bnc icc0,#1,0b \n"
+ : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp)
+ : "r"(v), "i"(256)
+ : "icc0");
+}
+
+#define __get_TCTR() ({ *(volatile unsigned long *)(0xfeff9418); })
+#define __get_TPRV() ({ *(volatile unsigned long *)(0xfeff9420); })
+#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); })
+#define __get_TCSR(T) ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); })
+#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); })
+
+#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; })
+
+#define __set_TCTR(V) do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0)
+#define __set_TPRV(V) do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0)
+#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0)
+#define __set_TCSR(T,V) \
+do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TxCKSL(T,V) \
+do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0)
+
+#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24)
+#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V)))
+
+/* clock control register */
+#define CLKC_CMODE 0x0f000000
+#define CLKC_SLPL 0x000f0000
+#define CLKC_P0 0x00000100
+#define CLKC_CM 0x00000003
+
+#define CLKC_CMODE_s 24
+
+/* timer control register - non-readback mode */
+#define TCTR_MODE_0 0x00000000
+#define TCTR_MODE_2 0x04000000
+#define TCTR_MODE_4 0x08000000
+#define TCTR_MODE_5 0x0a000000
+#define TCTR_RL_LATCH 0x00000000
+#define TCTR_RL_RW_LOW8 0x10000000
+#define TCTR_RL_RW_HIGH8 0x20000000
+#define TCTR_RL_RW_LH8 0x30000000
+#define TCTR_SC_CTR0 0x00000000
+#define TCTR_SC_CTR1 0x40000000
+#define TCTR_SC_CTR2 0x80000000
+
+/* timer control register - readback mode */
+#define TCTR_CNT0 0x02000000
+#define TCTR_CNT1 0x04000000
+#define TCTR_CNT2 0x08000000
+#define TCTR_NSTATUS 0x10000000
+#define TCTR_NCOUNT 0x20000000
+#define TCTR_SC_READBACK 0xc0000000
+
+/* timer control status registers - non-readback mode */
+#define TCSRx_DATA 0xff000000
+
+/* timer control status registers - readback mode */
+#define TCSRx_OUTPUT 0x80000000
+#define TCSRx_NULLCOUNT 0x40000000
+#define TCSRx_RL 0x30000000
+#define TCSRx_MODE 0x07000000
+
+/* timer clock select registers */
+#define TxCKSL_SELECT 0x0f000000
+#define __TxCKSL_SELECT(X) ((X) << 24)
+#define TxCKSL_EIGHT 0xf0000000
+
+#endif /* _ASM_TIMER_REGS_H */
--- /dev/null
+/* timex.h: FR-V architecture timex specifications
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+ return 0;
+}
+
+#define vxtime_lock() do {} while (0)
+#define vxtime_unlock() do {} while (0)
+
+#endif
+
--- /dev/null
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_MMU
+extern void check_pgt_cache(void);
+#else
+#define check_pgt_cache() do {} while(0)
+#endif
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
+
--- /dev/null
+/* tlbflush.h: TLB flushing functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef __ASSEMBLY__
+extern void asmlinkage __flush_tlb_all(void);
+extern void asmlinkage __flush_tlb_mm(unsigned long contextid);
+extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start);
+extern void asmlinkage __flush_tlb_range(unsigned long contextid,
+ unsigned long start, unsigned long end);
+#endif /* !__ASSEMBLY__ */
+
+#define flush_tlb_all() \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while(0)
+
+#define flush_tlb_mm(mm) \
+do { \
+ preempt_disable(); \
+ __flush_tlb_mm((mm)->context.id); \
+ preempt_enable(); \
+} while(0)
+
+#define flush_tlb_range(vma,start,end) \
+do { \
+ preempt_disable(); \
+ __flush_tlb_range((vma)->vm_mm->context.id, start, end); \
+ preempt_enable(); \
+} while(0)
+
+#define flush_tlb_page(vma,addr) \
+do { \
+ preempt_disable(); \
+ __flush_tlb_page((vma)->vm_mm->context.id, addr); \
+ preempt_enable(); \
+} while(0)
+
+
+#define __flush_tlb_global() flush_tlb_all()
+#define flush_tlb() flush_tlb_all()
+#define flush_tlb_kernel_range(start, end) flush_tlb_all()
+
+#else
+
+#define flush_tlb() BUG()
+#define flush_tlb_all() BUG()
+#define flush_tlb_mm(mm) BUG()
+#define flush_tlb_page(vma,addr) BUG()
+#define flush_tlb_range(mm,start,end) BUG()
+#define flush_tlb_kernel_range(start, end) BUG()
+
+#endif
+
+
+#endif /* _ASM_TLBFLUSH_H */
--- /dev/null
+#ifndef _ASM_TOPOLOGY_H
+#define _ASM_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#error NUMA not supported yet
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_TOPOLOGY_H */
--- /dev/null
+/* types.h: FRV types
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
--- /dev/null
+/* uaccess.h: userspace accessor functions
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/segment.h>
+#include <asm/sections.h>
+
+#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */
+
+#define __ptr(x) ((unsigned long __force *)(x))
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned long size)
+{
+#ifdef CONFIG_MMU
+ int flag = -EFAULT, tmp;
+
+ asm volatile (
+ " addcc %3,%2,%1,icc0 \n" /* set C-flag if addr+size>4GB */
+ " subcc.p %1,%4,gr0,icc1 \n" /* jump if addr+size>limit */
+ " bc icc0,#0,0f \n"
+ " bhi icc1,#0,0f \n"
+ " setlos #0,%0 \n" /* mark okay */
+ "0: \n"
+ : "=r"(flag), "=&r"(tmp)
+ : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag)
+ );
+
+ return flag;
+
+#else
+
+ if (addr < memory_start ||
+ addr > memory_end ||
+ size > memory_end - memory_start ||
+ addr + size > memory_end)
+ return -EFAULT;
+
+ return 0;
+#endif
+}
+
+#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size))
+
+#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0)
+#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr) \
+({ \
+ int __pu_err = 0; \
+ \
+ typeof(*(ptr)) __pu_val = (x); \
+ __chk_user_ptr(ptr); \
+ \
+ switch (sizeof (*(ptr))) { \
+ case 1: \
+ __put_user_asm(__pu_err, __pu_val, ptr, "b", "r"); \
+ break; \
+ case 2: \
+ __put_user_asm(__pu_err, __pu_val, ptr, "h", "r"); \
+ break; \
+ case 4: \
+ __put_user_asm(__pu_err, __pu_val, ptr, "", "r"); \
+ break; \
+ case 8: \
+ __put_user_asm(__pu_err, __pu_val, ptr, "d", "e"); \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+
+#define put_user(x, ptr) \
+({ \
+ typeof(*(ptr)) __user *_p = (ptr); \
+ int _e; \
+ \
+ _e = __range_ok(_p, sizeof(*_p)); \
+ if (_e == 0) \
+ _e = __put_user((x), _p); \
+ _e; \
+})
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#ifdef CONFIG_MMU
+
+#define __put_user_asm(err,x,ptr,dsize,constraint) \
+do { \
+ asm volatile("1: st"dsize"%I1 %2,%M1 \n" \
+ "2: \n" \
+ ".subsection 2 \n" \
+ "3: setlos %3,%0 \n" \
+ " bra 2b \n" \
+ ".previous \n" \
+ ".section __ex_table,\"a\" \n" \
+ " .balign 8 \n" \
+ " .long 1b,3b \n" \
+ ".previous" \
+ : "=r" (err) \
+ : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err) \
+ : "memory"); \
+} while (0)
+
+#else
+
+#define __put_user_asm(err,x,ptr,bwl,con) \
+do { \
+ asm(" st"bwl"%I0 %1,%M0 \n" \
+ " membar \n" \
+ : \
+ : "m" (*__ptr(ptr)), con (x) \
+ : "memory"); \
+} while (0)
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define __get_user(x, ptr) \
+({ \
+ int __gu_err = 0; \
+ __chk_user_ptr(ptr); \
+ \
+ switch (sizeof(*(ptr))) { \
+ case 1: { \
+ unsigned char __gu_val; \
+ __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r"); \
+ (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
+ break; \
+ } \
+ case 2: { \
+ unsigned short __gu_val; \
+ __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r"); \
+ (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
+ break; \
+ } \
+ case 4: { \
+ unsigned int __gu_val; \
+ __get_user_asm(__gu_err, __gu_val, ptr, "", "=r"); \
+ (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
+ break; \
+ } \
+ case 8: { \
+ unsigned long long __gu_val; \
+ __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e"); \
+ (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
+ break; \
+ } \
+ default: \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ __gu_err; \
+})
+
+#define get_user(x, ptr) \
+({ \
+ const typeof(*(ptr)) __user *_p = (ptr);\
+ int _e; \
+ \
+ _e = __range_ok(_p, sizeof(*_p)); \
+ if (likely(_e == 0)) \
+ _e = __get_user((x), _p); \
+ else \
+ (x) = (typeof(x)) 0; \
+ _e; \
+})
+
+extern int __get_user_bad(void);
+
+#ifdef CONFIG_MMU
+
+#define __get_user_asm(err,x,ptr,dtype,constraint) \
+do { \
+ asm("1: ld"dtype"%I2 %M2,%1 \n" \
+ "2: \n" \
+ ".subsection 2 \n" \
+ "3: setlos %3,%0 \n" \
+ " setlos #0,%1 \n" \
+ " bra 2b \n" \
+ ".previous \n" \
+ ".section __ex_table,\"a\" \n" \
+ " .balign 8 \n" \
+ " .long 1b,3b \n" \
+ ".previous" \
+ : "=r" (err), constraint (x) \
+ : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \
+ ); \
+} while(0)
+
+#else
+
+#define __get_user_asm(err,x,ptr,bwl,con) \
+ asm(" ld"bwl"%I1 %M1,%0 \n" \
+ " membar \n" \
+ : con(x) \
+ : "m" (*__ptr(ptr)))
+
+#endif
+
+/*****************************************************************************/
+/*
+ *
+ */
+#define ____force(x) (__force void *)(void __user *)(x)
+#ifdef CONFIG_MMU
+extern long __memset_user(void *dst, unsigned long count);
+extern long __memcpy_user(void *dst, const void *src, unsigned long count);
+
+#define clear_user(dst,count) __memset_user(____force(dst), (count))
+#define __copy_from_user_inatomic(to, from, n) __memcpy_user((to), ____force(from), (n))
+#define __copy_to_user_inatomic(to, from, n) __memcpy_user(____force(to), (from), (n))
+
+#else
+
+#define clear_user(dst,count) (memset(____force(dst), 0, (count)), 0)
+#define __copy_from_user_inatomic(to, from, n) (memcpy((to), ____force(from), (n)), 0)
+#define __copy_to_user_inatomic(to, from, n) (memcpy(____force(to), (from), (n)), 0)
+
+#endif
+
+#define __clear_user clear_user
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ might_sleep();
+ return __copy_to_user_inatomic(to, from, n);
+}
+
+static inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ might_sleep();
+ return __copy_from_user_inatomic(to, from, n);
+}
+
+static inline long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ unsigned long ret = n;
+
+ if (likely(__access_ok(from, n)))
+ ret = __copy_from_user(to, from, n);
+
+ if (unlikely(ret != 0))
+ memset(to + (n - ret), 0, ret);
+
+ return ret;
+}
+
+static inline long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n;
+}
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *src, long count);
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+extern unsigned long search_exception_table(unsigned long addr);
+
+#endif /* _ASM_UACCESS_H */
--- /dev/null
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif
--- /dev/null
+/* unaligned.h: unaligned access handler
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNALIGNED_H
+#define _ASM_UNALIGNED_H
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_be
+#define put_unaligned __put_unaligned_be
+
+#endif /* _ASM_UNALIGNED_H */
--- /dev/null
+#ifndef _ASM_UNISTD_H_
+#define _ASM_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_lchown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+// #define __NR_oldolduname /* 59 */ obsolete
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+// #define __NR_mmap 90 /* obsolete - not implemented */
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+// #define __NR_profil /* 98 */ obsolete
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+// #define __NR_ioperm /* 101 */ not supported
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+// #define __NR_olduname /* 109 */ obsolete
+// #define __NR_iopl /* 110 */ not supported
+#define __NR_vhangup 111
+// #define __NR_idle /* 112 */ Obsolete
+// #define __NR_vm86old /* 113 */ not supported
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+// #define __NR_modify_ldt /* 123 */ not supported
+#define __NR_cacheflush 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+// #define __NR_vm86 /* 166 */ not supported
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_chown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_lchown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_chown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_mincore 218
+#define __NR_madvise 219
+
+#define __NR_getdents64 220
+#define __NR_fcntl64 221
+#define __NR_security 223 /* syscall for security modules */
+#define __NR_gettid 224
+#define __NR_readahead 225
+#define __NR_setxattr 226
+#define __NR_lsetxattr 227
+#define __NR_fsetxattr 228
+#define __NR_getxattr 229
+#define __NR_lgetxattr 230
+#define __NR_fgetxattr 231
+#define __NR_listxattr 232
+#define __NR_llistxattr 233
+#define __NR_flistxattr 234
+#define __NR_removexattr 235
+#define __NR_lremovexattr 236
+#define __NR_fremovexattr 237
+#define __NR_tkill 238
+#define __NR_sendfile64 239
+#define __NR_futex 240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+#define __NR_set_thread_area 243
+#define __NR_get_thread_area 244
+#define __NR_io_setup 245
+#define __NR_io_destroy 246
+#define __NR_io_getevents 247
+#define __NR_io_submit 248
+#define __NR_io_cancel 249
+#define __NR_fadvise64 250
+
+#define __NR_exit_group 252
+#define __NR_lookup_dcookie 253
+#define __NR_epoll_create 254
+#define __NR_epoll_ctl 255
+#define __NR_epoll_wait 256
+#define __NR_remap_file_pages 257
+#define __NR_set_tid_address 258
+#define __NR_timer_create 259
+#define __NR_timer_settime (__NR_timer_create+1)
+#define __NR_timer_gettime (__NR_timer_create+2)
+#define __NR_timer_getoverrun (__NR_timer_create+3)
+#define __NR_timer_delete (__NR_timer_create+4)
+#define __NR_clock_settime (__NR_timer_create+5)
+#define __NR_clock_gettime (__NR_timer_create+6)
+#define __NR_clock_getres (__NR_timer_create+7)
+#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_statfs64 268
+#define __NR_fstatfs64 269
+#define __NR_tgkill 270
+#define __NR_utimes 271
+#define __NR_fadvise64_64 272
+#define __NR_vserver 273
+#define __NR_mbind 274
+#define __NR_get_mempolicy 275
+#define __NR_set_mempolicy 276
+#define __NR_mq_open 277
+#define __NR_mq_unlink (__NR_mq_open+1)
+#define __NR_mq_timedsend (__NR_mq_open+2)
+#define __NR_mq_timedreceive (__NR_mq_open+3)
+#define __NR_mq_notify (__NR_mq_open+4)
+#define __NR_mq_getsetattr (__NR_mq_open+5)
+#define __NR_kexec_load 283
+#define __NR_waitid 284
+/* #define __NR_sys_setaltroot 285 */
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+#define __NR_migrate_pages 294
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_fstatat64 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
+#define __NR_unshare 310
+#define __NR_set_robust_list 311
+#define __NR_get_robust_list 312
+#define __NR_splice 313
+#define __NR_sync_file_range 314
+#define __NR_tee 315
+#define __NR_vmsplice 316
+#define __NR_move_pages 317
+#define __NR_getcpu 318
+#define __NR_epoll_pwait 319
+#define __NR_utimensat 320
+#define __NR_signalfd 321
+#define __NR_timerfd_create 322
+#define __NR_eventfd 323
+#define __NR_fallocate 324
+#define __NR_timerfd_settime 325
+#define __NR_timerfd_gettime 326
+#define __NR_signalfd4 327
+#define __NR_eventfd2 328
+#define __NR_epoll_create1 329
+#define __NR_dup3 330
+#define __NR_pipe2 331
+#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 335
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+/* #define __ARCH_WANT_OLD_READDIR */
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+/* #define __ARCH_WANT_SYS_GETHOSTNAME */
+#define __ARCH_WANT_SYS_PAUSE
+/* #define __ARCH_WANT_SYS_SGETMASK */
+/* #define __ARCH_WANT_SYS_SIGNAL */
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+/* #define __ARCH_WANT_SYS_SIGPENDING */
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H_ */
--- /dev/null
+/* user.h: FR-V core file format stuff
+ *
+ * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <asm/registers.h>
+
+/* Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the 'trad-core' bfd). There are quite a number of
+ * obstacles to being able to view the contents of the floating point
+ * registers, and until these are solved you will not be able to view
+ * the contents of them. Actually, you can read in the core file and
+ * look at the contents of the user struct to find out what the
+ * floating point registers contain.
+ *
+ * The actual file contents are as follows:
+ * UPAGE:
+ * 1 page consisting of a user struct that tells gdb what is present
+ * in the file. Directly after this is a copy of the task_struct,
+ * which is currently not used by gdb, but it may come in useful at
+ * some point. All of the registers are stored as part of the
+ * upage. The upage should always be only one page.
+ *
+ * DATA:
+ * The data area is stored. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any
+ * memory that may have been malloced. No attempt is made to
+ * determine if a page is demand-zero or if a page is totally
+ * unused, we just cover the entire range. All of the addresses are
+ * rounded in such a way that an integral number of pages is
+ * written.
+ *
+ * STACK:
+ * We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from (esp) to
+ * current->start_stack, so we round each of these off in order to
+ * be able to write an integer number of pages. The minimum core
+ * file size is 3 pages, or 12288 bytes.
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+ * this will be used by gdb to figure out where the data and stack segments
+ * are within the file, and what virtual addresses to use.
+ */
+struct user {
+ /* We start with the registers, to mimic the way that "memory" is returned
+ * from the ptrace(3,...) function. */
+ struct user_context regs;
+
+ /* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long u_tsize; /* Text segment size (pages). */
+ unsigned long u_dsize; /* Data segment size (pages). */
+ unsigned long u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ * This is actually the bottom of the stack,
+ * the top of the stack is always found in the
+ * esp register. */
+ long int signal; /* Signal that caused the core dump. */
+
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
--- /dev/null
+/* vga.h: VGA register stuff
+ *
+ * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
--- /dev/null
+/* virtconvert.h: virtual/physical/page address convertion
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_VIRTCONVERT_H
+#define _ASM_VIRTCONVERT_H
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/setup.h>
+
+#ifdef CONFIG_MMU
+
+#define phys_to_virt(vaddr) ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr) - PAGE_OFFSET)
+
+#else
+
+#define phys_to_virt(vaddr) ((void *) (vaddr))
+#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
+
+#endif
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
+#define page_to_phys(page) virt_to_phys((void *)__page_address(page))
+
+#endif
+#endif
--- /dev/null
+#include <asm-generic/xor.h>
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
syscall_table_size = (. - sys_call_table)
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __551_LCR 0xfeff1100
#define __551_LSBR 0xfeff1c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
# command line string
#
###############################################################################
- .section .text.head,"ax"
+ __HEAD
.balign 4
.globl _boot, __head_reference
#include <asm/io.h>
#ifdef CONFIG_BLK_DEV_INITRD
-#include <linux/blk.h>
#include <asm/pgtable.h>
#endif
_sinittext = .;
.init.text : {
- *(.text.head)
+ HEAD_TEXT
#ifndef CONFIG_DEBUG_INFO
INIT_TEXT
EXIT_TEXT
struct pci_bus *__nongpreldata pci_root_bus;
struct pci_ops *__nongpreldata pci_root_ops;
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0,
+ .end = -1,
+ .flags = IORESOURCE_MEM,
+};
+
/*
* Functions for accessing PCI configuration space
*/
#if 0
printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
#endif
+
+ if (bus->number == 0) {
+ bus->resource[0] = &pci_ioport_resource;
+ bus->resource[1] = &pci_iomem_resource;
+ }
+
pci_read_bridge_bases(bus);
if (bus->number == 0) {
/* enable PCI arbitration */
__reg_MB86943_pci_arbiter = MB86943_PCIARB_EN;
- ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
- ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
- ioport_resource.end += ioport_resource.start;
+ pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+ pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+ pci_ioport_resource.end += pci_ioport_resource.start;
printk("PCI IO window: %08llx-%08llx\n",
- (unsigned long long) ioport_resource.start,
- (unsigned long long) ioport_resource.end);
+ (unsigned long long) pci_ioport_resource.start,
+ (unsigned long long) pci_ioport_resource.end);
- iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+ pci_iomem_resource.end += pci_iomem_resource.start;
- /* Reserve somewhere to write to flush posted writes. */
- iomem_resource.start += 0x400;
-
- iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
- iomem_resource.end += iomem_resource.start;
+ /* Reserve somewhere to write to flush posted writes. This is used by
+ * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+ * CPU-PCI bridge to flush as this doesn't happen automatically when a
+ * read is performed on the MB93090 development kit motherboard.
+ */
+ pci_iomem_resource.start += 0x400;
printk("PCI MEM window: %08llx-%08llx\n",
- (unsigned long long) iomem_resource.start,
- (unsigned long long) iomem_resource.end);
+ (unsigned long long) pci_iomem_resource.start,
+ (unsigned long long) pci_iomem_resource.end);
printk("PCI DMA memory: %08lx-%08lx\n",
dma_coherent_mem_start, dma_coherent_mem_end);
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
if (!pci_probe)
return -ENXIO;
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
--- /dev/null
+#ifndef __H8300_TIMER_H
+#define __H8300_TIMER_H
+
+void h8300_timer_tick(void);
+void h8300_timer_setup(void);
+void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
+ unsigned int *hour, unsigned int *min, unsigned int *sec);
+
+#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */
+
+#define calc_param(cnt, div, rate, limit) \
+do { \
+ cnt = TIMER_FREQ / HZ; \
+ for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \
+ if (rate[div] == 0) \
+ continue; \
+ if ((cnt / rate[div]) > limit) \
+ break; \
+ } \
+ if (div == ARRAY_SIZE(divide_rate)) \
+ panic("Timer counter overflow"); \
+ cnt /= divide_rate[div]; \
+} while(0)
+
+#endif
{
}
-static void
+static int
hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
{
+ return 0;
}
static struct hw_interrupt_type irq_type_hp_sim = {
--- /dev/null
+#ifndef _ASM_IA64_IDLE_H
+#define _ASM_IA64_IDLE_H
+
+static inline void enter_idle(void) { }
+static inline void exit_idle(void) { }
+
+#endif /* _ASM_IA64_IDLE_H */
register unsigned long ia64_intri_res asm ("r8"); \
register unsigned long __reg asm ("r8") = (reg); \
\
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \
PARAVIRT_TYPE(GETREG) \
+ (reg)) \
register unsigned long ia64_clobber1 asm ("r8"); \
register unsigned long ia64_clobber2 asm ("r9"); \
\
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \
PARAVIRT_TYPE(SETREG) \
+ (reg)) \
extern char no_int_routing __devinitdata;
extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
extern int smp_num_siblings;
extern void __iomem *ipi_base_addr;
extern unsigned char smp_int_redirect;
#define __NR_dup3 1316
#define __NR_pipe2 1317
#define __NR_inotify_init1 1318
+#define __NR_preadv 1319
+#define __NR_pwritev 1320
#ifdef __KERNEL__
-#define NR_syscalls 295 /* length of syscall table */
+#define NR_syscalls 297 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
return !(ia64_psr(regs)->i);
}
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+static inline void handle_irq(int irq, struct pt_regs *regs)
{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- irq_enter();
__do_IRQ(irq);
- irq_exit();
- set_irq_regs(old_regs);
}
#define irq_ctx_init(cpu) do { } while (0)
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
return gsi;
fadt = (struct acpi_table_fadt *)fadt_header;
- acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+ acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+ ACPI_ACTIVE_LOW);
return 0;
}
static void __iomem *cyclone_mc;
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
{
return (cycle_t)readq((void __iomem *)cyclone_mc);
}
data8 sys_dup3
data8 sys_pipe2
data8 sys_inotify_init1
+ data8 sys_preadv
+ data8 sys_pwritev // 1320
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
}
-static void
+static int
iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
{
#ifdef CONFIG_SMP
cpu = cpumask_first_and(cpu_online_mask, mask);
if (cpu >= nr_cpu_ids)
- return;
+ return -1;
if (irq_prepare_move(irq, cpu))
- return;
+ return -1;
dest = cpu_physical_id(cpu);
if (!iosapic_intr_info[irq].count)
- return; /* not an IOSAPIC interrupt */
+ return -1; /* not an IOSAPIC interrupt */
set_irq_affinity_info(irq, dest, redir);
iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
}
+
#endif
+ return 0;
}
/*
static struct irq_chip ia64_msi_chip;
#ifdef CONFIG_SMP
-static void ia64_set_msi_irq_affinity(unsigned int irq,
+static int ia64_set_msi_irq_affinity(unsigned int irq,
const cpumask_t *cpu_mask)
{
struct msi_msg msg;
int cpu = first_cpu(*cpu_mask);
if (!cpu_online(cpu))
- return;
+ return -1;
if (irq_prepare_move(irq, cpu))
- return;
+ return -1;
read_msi_msg(irq, &msg);
write_msi_msg(irq, &msg);
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+
+ return 0;
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_DMAR
#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_cfg *cfg = irq_cfg + irq;
struct msi_msg msg;
int cpu = cpumask_first(mask);
if (!cpu_online(cpu))
- return;
+ return -1;
if (irq_prepare_move(irq, cpu))
- return;
+ return -1;
dmar_msi_read(irq, &msg);
dmar_msi_write(irq, &msg);
cpumask_copy(irq_desc[irq].affinity, mask);
+
+ return 0;
}
#endif /* CONFIG_SMP */
static void *ia64_swiotlb_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
{
- if (dev->coherent_dma_mask != DMA_64BIT_MASK)
+ if (dev->coherent_dma_mask != DMA_BIT_MASK(64))
gfp |= GFP_DMA;
return swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
}
{
platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
}
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
/*
* Called with preemption disabled.
return;
}
+ smp_call_function_mask(mm->cpu_vm_mask,
+ (void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
+ local_irq_disable();
+ local_finish_flush_tlb_mm(mm);
+ local_irq_enable();
preempt_enable();
- /*
- * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
- * have been running in the address space. It's not clear that this is worth the
- * trouble though: to avoid races, we have to raise the IPI on the target CPU
- * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
- * rather trivial.
- */
- on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
}
void arch_send_call_function_single_ipi(int cpu)
#include "fsyscall_gtod_data.h"
-static cycle_t itc_get_cycles(void);
+static cycle_t itc_get_cycles(struct clocksource *cs);
struct fsyscall_gtod_data_t fsyscall_gtod_data = {
.lock = SEQLOCK_UNLOCKED,
}
}
-static cycle_t itc_get_cycles(void)
+static cycle_t itc_get_cycles(struct clocksource *cs)
{
u64 lcycle, now, ret;
int r;
again:
- preempt_disable();
- local_irq_disable();
-
if (signal_pending(current)) {
- local_irq_enable();
- preempt_enable();
r = -EINTR;
kvm_run->exit_reason = KVM_EXIT_INTR;
goto out;
}
+ /*
+ * down_read() may sleep and return with interrupts enabled
+ */
+ down_read(&vcpu->kvm->slots_lock);
+
+ preempt_disable();
+ local_irq_disable();
+
vcpu->guest_mode = 1;
kvm_guest_enter();
- down_read(&vcpu->kvm->slots_lock);
r = vti_vcpu_run(vcpu, kvm_run);
if (r < 0) {
local_irq_enable();
return new_irq_info;
}
-static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
+static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
{
struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
nasid_t nasid;
list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
sn_irq_lh[irq], list)
(void)sn_retarget_vector(sn_irq_info, nasid, slice);
+
+ return 0;
}
#ifdef CONFIG_SMP
}
#ifdef CONFIG_SMP
-static void sn_set_msi_irq_affinity(unsigned int irq,
+static int sn_set_msi_irq_affinity(unsigned int irq,
const struct cpumask *cpu_mask)
{
struct msi_msg msg;
cpu = cpumask_first(cpu_mask);
sn_irq_info = sn_msi_info[irq].sn_irq_info;
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
- return;
+ return -1;
/*
* Release XIO resources for the old MSI PCI address
new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
sn_msi_info[irq].sn_irq_info = new_irq_info;
if (new_irq_info == NULL)
- return;
+ return -1;
/*
* Map the xio address into bus space
write_msi_msg(irq, &msg);
cpumask_copy(irq_desc[irq].affinity, cpu_mask);
+
+ return 0;
}
#endif /* CONFIG_SMP */
extern unsigned long sn_rtc_cycles_per_second;
-static cycle_t read_sn2(void)
+static cycle_t read_sn2(struct clocksource *cs)
{
return (cycle_t)readq(RTC_COUNTER_ADDR);
}
#define isBP p3 // are we the Bootstrap Processor?
- .text
-
GLOBAL_ENTRY(xen_setup_hook)
mov r8=XEN_PV_DOMAIN_ASM
(isBP) movl r9=xen_domain_type;;
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
piggy.o vmlinux.lds
-EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
--- /dev/null
+include include/asm-generic/Kbuild.asm
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 by Hiroyuki Kondo
+ *
+ * Defitions for the address spaces of the M32R CPUs.
+ */
+#ifndef __ASM_M32R_ADDRSPACE_H
+#define __ASM_M32R_ADDRSPACE_H
+
+/*
+ * Memory segments (32bit kernel mode addresses)
+ */
+#define KUSEG 0x00000000
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+#define KSEG2 0xc0000000
+#define KSEG3 0xe0000000
+
+#define K0BASE KSEG0
+
+/*
+ * Returns the kernel segment base of a given address
+ */
+#ifndef __ASSEMBLY__
+#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000)
+#else
+#define KSEGX(a) ((a) & 0xe0000000)
+#endif
+
+/*
+ * Returns the physical address of a KSEG0/KSEG1 address
+ */
+#ifndef __ASSEMBLY__
+#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
+#else
+#define PHYSADDR(a) ((a) & 0x1fffffff)
+#endif
+
+/*
+ * Map an address to a certain kernel segment
+ */
+#ifndef __ASSEMBLY__
+#define KSEG0ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0))
+#define KSEG1ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1))
+#define KSEG2ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2))
+#define KSEG3ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3))
+#else
+#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0)
+#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1)
+#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2)
+#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3)
+#endif
+
+#endif /* __ASM_M32R_ADDRSPACE_H */
--- /dev/null
+#ifndef _ASM_M32R_ASSEMBLER_H
+#define _ASM_M32R_ASSEMBLER_H
+
+/*
+ * linux/asm-m32r/assembler.h
+ *
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ *
+ * This file contains M32R architecture specific macro definitions.
+ */
+
+#include <linux/stringify.h>
+
+#undef __STR
+
+#ifdef __ASSEMBLY__
+#define __STR(x) x
+#else
+#define __STR(x) __stringify(x)
+#endif
+
+#ifdef CONFIG_SMP
+#define M32R_LOCK __STR(lock)
+#define M32R_UNLOCK __STR(unlock)
+#else
+#define M32R_LOCK __STR(ld)
+#define M32R_UNLOCK __STR(st)
+#endif
+
+#ifdef __ASSEMBLY__
+#undef ENTRY
+#define ENTRY(name) ENTRY_M name
+ .macro ENTRY_M name
+ .global \name
+ ALIGN
+\name:
+ .endm
+#endif
+
+
+/**
+ * LDIMM - load immediate value
+ * STI - enable interruption
+ * CLI - disable interruption
+ */
+
+#ifdef __ASSEMBLY__
+
+#define LDIMM(reg,x) LDIMM reg x
+ .macro LDIMM reg x
+ seth \reg, #high(\x)
+ or3 \reg, \reg, #low(\x)
+ .endm
+
+#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
+#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
+ .macro ENABLE_INTERRUPTS reg
+ setpsw #0x40 -> nop
+ ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
+ .endm
+
+#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
+ .macro DISABLE_INTERRUPTS reg
+ clrpsw #0x40 -> nop
+ ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
+ .endm
+#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
+ .macro ENABLE_INTERRUPTS reg
+ mvfc \reg, psw
+ or3 \reg, \reg, #0x0040
+ mvtc \reg, psw
+ .endm
+
+#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
+ .macro DISABLE_INTERRUPTS reg
+ mvfc \reg, psw
+ and3 \reg, \reg, #0xffbf
+ mvtc \reg, psw
+ .endm
+#endif /* CONFIG_CHIP_M32102 */
+
+ .macro SAVE_ALL
+ push r0 ; orig_r0
+ push sp ; spi (r15)
+ push lr ; r14
+ push r13
+ mvfc r13, cr3 ; spu
+ push r13
+ mvfc r13, bbpc
+ push r13
+ mvfc r13, bbpsw
+ push r13
+ mvfc r13, bpc
+ push r13
+ mvfc r13, psw
+ push r13
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+ mvfaclo r13, a1
+ push r13
+ mvfachi r13, a1
+ push r13
+ mvfaclo r13, a0
+ push r13
+ mvfachi r13, a0
+ push r13
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+ mvfaclo r13
+ push r13
+ mvfachi r13
+ push r13
+ ldi r13, #0
+ push r13 ; dummy push acc1h
+ push r13 ; dummy push acc1l
+#else
+#error unknown isa configuration
+#endif
+ ldi r13, #-1
+ push r13 ; syscall_nr (default: -1)
+ push r12
+ push r11
+ push r10
+ push r9
+ push r8
+ push r7
+ push r3
+ push r2
+ push r1
+ push r0
+ addi sp, #-4 ; room for implicit pt_regs parameter
+ push r6
+ push r5
+ push r4
+ .endm
+
+ .macro RESTORE_ALL
+ pop r4
+ pop r5
+ pop r6
+ addi sp, #4
+ pop r0
+ pop r1
+ pop r2
+ pop r3
+ pop r7
+ pop r8
+ pop r9
+ pop r10
+ pop r11
+ pop r12
+ addi r15, #4 ; Skip syscall number
+#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
+ pop r13
+ mvtachi r13, a0
+ pop r13
+ mvtaclo r13, a0
+ pop r13
+ mvtachi r13, a1
+ pop r13
+ mvtaclo r13, a1
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+ pop r13 ; dummy pop acc1h
+ pop r13 ; dummy pop acc1l
+ pop r13
+ mvtachi r13
+ pop r13
+ mvtaclo r13
+#else
+#error unknown isa configuration
+#endif
+ pop r14
+ mvtc r14, psw
+ pop r14
+ mvtc r14, bpc
+ addi sp, #8 ; Skip bbpsw, bbpc
+ pop r14
+ mvtc r14, cr3 ; spu
+ pop r13
+ pop lr ; r14
+ pop sp ; spi (r15)
+ addi sp, #4 ; Skip orig_r0
+ .fillinsn
+1: rte
+ .section .fixup,"ax"
+2: bl do_exit
+ .previous
+ .section __ex_table,"a"
+ ALIGN
+ .long 1b, 2b
+ .previous
+ .endm
+
+#define GET_CURRENT(reg) get_current reg
+ .macro get_current reg
+ ldi \reg, #-8192
+ and \reg, sp
+ .endm
+
+#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
+ .macro SWITCH_TO_KERNEL_STACK
+ ; switch to kernel stack (spi)
+ clrpsw #0x80 -> nop
+ .endm
+#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+ .macro SWITCH_TO_KERNEL_STACK
+ push r0 ; save r0 for working
+ mvfc r0, psw
+ and3 r0, r0, #0x00ff7f
+ mvtc r0, psw
+ slli r0, #16
+ bltz r0, 1f ; check BSM-bit
+;
+ ;; called from kernel context: previous stack = spi
+ pop r0 ; retrieve r0
+ bra 2f
+ .fillinsn
+1:
+ ;; called from user context: previous stack = spu
+ mvfc r0, cr3 ; spu
+ addi r0, #4
+ mvtc r0, cr3 ; spu
+ ld r0, @(-4,r0) ; retrieve r0
+ .fillinsn
+2:
+ .endm
+#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_M32R_ASSEMBLER_H */
--- /dev/null
+#ifndef _ASM_M32R_ATOMIC_H
+#define _ASM_M32R_ATOMIC_H
+
+/*
+ * linux/include/asm-m32r/atomic.h
+ *
+ * M32R version:
+ * Copyright (C) 2001, 2002 Hitoshi Yamamoto
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/types.h>
+#include <asm/assembler.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i) { (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ */
+#define atomic_set(v,i) (((v)->counter) = (i))
+
+/**
+ * atomic_add_return - add integer to atomic variable and return it
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and return (@i + @v).
+ */
+static __inline__ int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# atomic_add_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "add %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&v->counter), "r" (i)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable and return it
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and return (@v - @i).
+ */
+static __inline__ int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# atomic_sub_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "sub %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&v->counter), "r" (i)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+#define atomic_add(i,v) ((void) atomic_add_return((i), (v)))
+
+/**
+ * atomic_sub - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+#define atomic_sub(i,v) ((void) atomic_sub_return((i), (v)))
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+
+/**
+ * atomic_inc_return - increment atomic variable and return it
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1 and returns the result.
+ */
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+ unsigned long flags;
+ int result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# atomic_inc_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "addi %0, #1; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&v->counter)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * atomic_dec_return - decrement atomic variable and return it
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and returns the result.
+ */
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+ unsigned long flags;
+ int result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# atomic_dec_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "addi %0, #-1; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&v->counter)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) ((void)atomic_inc_return(v))
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) ((void)atomic_dec_return(v))
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and
+ * returns true if the result is 0, or false for all
+ * other cases.
+ */
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0)
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+ c = atomic_read(v);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = atomic_cmpxchg((v), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# atomic_clear_mask \n\t"
+ DCACHE_CLEAR("%0", "r5", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "and %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (addr), "r" (~mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r5"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, atomic_t *addr)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# atomic_set_mask \n\t"
+ DCACHE_CLEAR("%0", "r5", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "or %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (addr), "r" (mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r5"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing on m32r */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_M32R_ATOMIC_H */
--- /dev/null
+#ifndef _ASM_M32R__AUXVEC_H
+#define _ASM_M32R__AUXVEC_H
+
+#endif /* _ASM_M32R__AUXVEC_H */
--- /dev/null
+#ifndef _ASM_M32R_BITOPS_H
+#define _ASM_M32R_BITOPS_H
+
+/*
+ * linux/include/asm-m32r/bitops.h
+ *
+ * Copyright 1992, Linus Torvalds.
+ *
+ * M32R version:
+ * Copyright (C) 2001, 2002 Hitoshi Yamamoto
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/assembler.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <asm/types.h>
+
+/*
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered. See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void set_bit(int nr, volatile void * addr)
+{
+ __u32 mask;
+ volatile __u32 *a = addr;
+ unsigned long flags;
+ unsigned long tmp;
+
+ a += (nr >> 5);
+ mask = (1 << (nr & 0x1F));
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r6", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "or %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (a), "r" (mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered. However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void clear_bit(int nr, volatile void * addr)
+{
+ __u32 mask;
+ volatile __u32 *a = addr;
+ unsigned long flags;
+ unsigned long tmp;
+
+ a += (nr >> 5);
+ mask = (1 << (nr & 0x1F));
+
+ local_irq_save(flags);
+
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r6", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "and %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (a), "r" (~mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void change_bit(int nr, volatile void * addr)
+{
+ __u32 mask;
+ volatile __u32 *a = addr;
+ unsigned long flags;
+ unsigned long tmp;
+
+ a += (nr >> 5);
+ mask = (1 << (nr & 0x1F));
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r6", "%1")
+ M32R_LOCK" %0, @%1; \n\t"
+ "xor %0, %2; \n\t"
+ M32R_UNLOCK" %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (a), "r" (mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_set_bit(int nr, volatile void * addr)
+{
+ __u32 mask, oldbit;
+ volatile __u32 *a = addr;
+ unsigned long flags;
+ unsigned long tmp;
+
+ a += (nr >> 5);
+ mask = (1 << (nr & 0x1F));
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "%1", "%2")
+ M32R_LOCK" %0, @%2; \n\t"
+ "mv %1, %0; \n\t"
+ "and %0, %3; \n\t"
+ "or %1, %3; \n\t"
+ M32R_UNLOCK" %1, @%2; \n\t"
+ : "=&r" (oldbit), "=&r" (tmp)
+ : "r" (a), "r" (mask)
+ : "memory"
+ );
+ local_irq_restore(flags);
+
+ return (oldbit != 0);
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
+{
+ __u32 mask, oldbit;
+ volatile __u32 *a = addr;
+ unsigned long flags;
+ unsigned long tmp;
+
+ a += (nr >> 5);
+ mask = (1 << (nr & 0x1F));
+
+ local_irq_save(flags);
+
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "%1", "%3")
+ M32R_LOCK" %0, @%3; \n\t"
+ "mv %1, %0; \n\t"
+ "and %0, %2; \n\t"
+ "not %2, %2; \n\t"
+ "and %1, %2; \n\t"
+ M32R_UNLOCK" %1, @%3; \n\t"
+ : "=&r" (oldbit), "=&r" (tmp), "+r" (mask)
+ : "r" (a)
+ : "memory"
+ );
+ local_irq_restore(flags);
+
+ return (oldbit != 0);
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static __inline__ int test_and_change_bit(int nr, volatile void * addr)
+{
+ __u32 mask, oldbit;
+ volatile __u32 *a = addr;
+ unsigned long flags;
+ unsigned long tmp;
+
+ a += (nr >> 5);
+ mask = (1 << (nr & 0x1F));
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "%1", "%2")
+ M32R_LOCK" %0, @%2; \n\t"
+ "mv %1, %0; \n\t"
+ "and %0, %3; \n\t"
+ "xor %1, %3; \n\t"
+ M32R_UNLOCK" %1, @%2; \n\t"
+ : "=&r" (oldbit), "=&r" (tmp)
+ : "r" (a), "r" (mask)
+ : "memory"
+ );
+ local_irq_restore(flags);
+
+ return (oldbit != 0);
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#endif /* __KERNEL__ */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_BITOPS_H */
--- /dev/null
+#ifndef _M32R_BUG_H
+#define _M32R_BUG_H
+#include <asm-generic/bug.h>
+#endif
--- /dev/null
+#ifndef _ASM_M32R_BUGS_H
+#define _ASM_M32R_BUGS_H
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ * void check_bugs(void);
+ */
+#include <asm/processor.h>
+
+static void __init check_bugs(void)
+{
+ extern unsigned long loops_per_jiffy;
+
+ current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+}
+
+#endif /* _ASM_M32R_BUGS_H */
--- /dev/null
+#ifndef _ASM_M32R_BYTEORDER_H
+#define _ASM_M32R_BYTEORDER_H
+
+#if defined(__LITTLE_ENDIAN__)
+# include <linux/byteorder/little_endian.h>
+#else
+# include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* _ASM_M32R_BYTEORDER_H */
--- /dev/null
+#ifndef _ASM_M32R_CACHE_H
+#define _ASM_M32R_CACHE_H
+
+/* L1 cache line size */
+#define L1_CACHE_SHIFT 4
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#endif /* _ASM_M32R_CACHE_H */
--- /dev/null
+/*
+ * cachectl.h -- defines for M32R cache control system calls
+ *
+ * Copyright (C) 2003 by Kazuhiro Inaoka
+ */
+#ifndef __ASM_M32R_CACHECTL
+#define __ASM_M32R_CACHECTL
+
+/*
+ * Options for cacheflush system call
+ *
+ * cacheflush() is currently fluch_cache_all().
+ */
+#define ICACHE (1<<0) /* flush instruction cache */
+#define DCACHE (1<<1) /* writeback and flush data cache */
+#define BCACHE (ICACHE|DCACHE) /* flush both caches */
+
+/*
+ * Caching modes for the cachectl(2) call
+ *
+ * cachectl(2) is currently not supported and returns ENOSYS.
+ */
+#define CACHEABLE 0 /* make pages cacheable */
+#define UNCACHEABLE 1 /* make pages uncacheable */
+
+#endif /* __ASM_M32R_CACHECTL */
--- /dev/null
+#ifndef _ASM_M32R_CACHEFLUSH_H
+#define _ASM_M32R_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+extern void _flush_cache_all(void);
+extern void _flush_cache_copyback_all(void);
+
+#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#ifndef CONFIG_SMP
+#define flush_icache_range(start, end) _flush_cache_copyback_all()
+#define flush_icache_page(vma,pg) _flush_cache_copyback_all()
+#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_copyback_all()
+#define flush_cache_sigtramp(addr) _flush_cache_copyback_all()
+#else /* CONFIG_SMP */
+extern void smp_flush_cache_all(void);
+#define flush_icache_range(start, end) smp_flush_cache_all()
+#define flush_icache_page(vma,pg) smp_flush_cache_all()
+#define flush_icache_user_range(vma,pg,adr,len) smp_flush_cache_all()
+#define flush_cache_sigtramp(addr) _flush_cache_copyback_all()
+#endif /* CONFIG_SMP */
+#elif defined(CONFIG_CHIP_M32102)
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_icache_range(start, end) _flush_cache_all()
+#define flush_icache_page(vma,pg) _flush_cache_all()
+#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_all()
+#define flush_cache_sigtramp(addr) _flush_cache_all()
+#else
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_icache_range(start, end) do { } while (0)
+#define flush_icache_page(vma,pg) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_sigtramp(addr) do { } while (0)
+#endif /* CONFIG_CHIP_* */
+
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+ memcpy(dst, src, len); \
+ flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+#endif /* _ASM_M32R_CACHEFLUSH_H */
--- /dev/null
+#ifdef __KERNEL__
+#ifndef _ASM_M32R_CHECKSUM_H
+#define _ASM_M32R_CHECKSUM_H
+
+/*
+ * include/asm-m32r/checksum.h
+ *
+ * IP/TCP/UDP checksum routines
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Some code taken from mips and parisc architecture.
+ *
+ * Copyright (C) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * The same as csum_partial, but copies from src while it checksums.
+ *
+ * Here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+
+/*
+ * This is a new version of the above that records errors it finds in *errp,
+ * but continues and zeros thre rest of the buffer.
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr);
+
+/*
+ * Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ unsigned long tmpreg;
+ __asm__(
+ " sll3 %1, %0, #16 \n"
+ " cmp %0, %0 \n"
+ " addx %0, %1 \n"
+ " ldi %1, #0 \n"
+ " srli %0, #16 \n"
+ " addx %0, %1 \n"
+ " xor3 %0, %0, #0x0000ffff \n"
+ : "=r" (sum), "=&r" (tmpreg)
+ : "0" (sum)
+ : "cbit"
+ );
+ return (__force __sum16)sum;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ unsigned long tmpreg0, tmpreg1;
+ __wsum sum;
+
+ __asm__ __volatile__(
+ " ld %0, @%1+ \n"
+ " addi %2, #-4 \n"
+ "# bgez %2, 2f \n"
+ " cmp %0, %0 \n"
+ " ld %3, @%1+ \n"
+ " ld %4, @%1+ \n"
+ " addx %0, %3 \n"
+ " ld %3, @%1+ \n"
+ " addx %0, %4 \n"
+ " addx %0, %3 \n"
+ " .fillinsn\n"
+ "1: \n"
+ " ld %4, @%1+ \n"
+ " addi %2, #-1 \n"
+ " addx %0, %4 \n"
+ " bgtz %2, 1b \n"
+ "\n"
+ " ldi %3, #0 \n"
+ " addx %0, %3 \n"
+ " .fillinsn\n"
+ "2: \n"
+ /* Since the input registers which are loaded with iph and ihl
+ are modified, we must also specify them as outputs, or gcc
+ will assume they contain their original values. */
+ : "=&r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmpreg0), "=&r" (tmpreg1)
+ : "1" (iph), "2" (ihl)
+ : "cbit", "memory");
+
+ return csum_fold(sum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+#if defined(__LITTLE_ENDIAN)
+ unsigned long len_proto = (proto + len) << 8;
+#else
+ unsigned long len_proto = proto + len;
+#endif
+ unsigned long tmpreg;
+
+ __asm__(
+ " cmp %0, %0 \n"
+ " addx %0, %2 \n"
+ " addx %0, %3 \n"
+ " addx %0, %4 \n"
+ " ldi %1, #0 \n"
+ " addx %0, %1 \n"
+ : "=r" (sum), "=&r" (tmpreg)
+ : "r" (daddr), "r" (saddr), "r" (len_proto), "0" (sum)
+ : "cbit"
+ );
+
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+ return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+ const struct in6_addr *daddr,
+ __u32 len, unsigned short proto,
+ __wsum sum)
+{
+ unsigned long tmpreg0, tmpreg1, tmpreg2, tmpreg3;
+ __asm__(
+ " ld %1, @(%5) \n"
+ " ld %2, @(4,%5) \n"
+ " ld %3, @(8,%5) \n"
+ " ld %4, @(12,%5) \n"
+ " add %0, %1 \n"
+ " addx %0, %2 \n"
+ " addx %0, %3 \n"
+ " addx %0, %4 \n"
+ " ld %1, @(%6) \n"
+ " ld %2, @(4,%6) \n"
+ " ld %3, @(8,%6) \n"
+ " ld %4, @(12,%6) \n"
+ " addx %0, %1 \n"
+ " addx %0, %2 \n"
+ " addx %0, %3 \n"
+ " addx %0, %4 \n"
+ " addx %0, %7 \n"
+ " addx %0, %8 \n"
+ " ldi %1, #0 \n"
+ " addx %0, %1 \n"
+ : "=&r" (sum), "=&r" (tmpreg0), "=&r" (tmpreg1),
+ "=&r" (tmpreg2), "=&r" (tmpreg3)
+ : "r" (saddr), "r" (daddr),
+ "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+ : "cbit"
+ );
+
+ return csum_fold(sum);
+}
+
+#endif /* _ASM_M32R_CHECKSUM_H */
+#endif /* __KERNEL__ */
--- /dev/null
+#ifndef __M32R_CPUTIME_H
+#define __M32R_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M32R_CPUTIME_H */
--- /dev/null
+#ifndef _ASM_M32R_CURRENT_H
+#define _ASM_M32R_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static __inline__ struct task_struct *get_current(void)
+{
+ return current_thread_info()->task;
+}
+
+#define current (get_current())
+
+#endif /* _ASM_M32R_CURRENT_H */
--- /dev/null
+#ifndef _ASM_M32R_DELAY_H
+#define _ASM_M32R_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/m32r/lib/delay.c
+ */
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+ ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
+ __udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+ ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+ __ndelay(n))
+
+#endif /* _ASM_M32R_DELAY_H */
--- /dev/null
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
--- /dev/null
+#include <asm-generic/div64.h>
--- /dev/null
+#ifndef _ASM_M32R_DMA_H
+#define _ASM_M32R_DMA_H
+
+#include <asm/io.h>
+
+/*
+ * The maximum address that we can perform a DMA transfer
+ * to on this platform
+ */
+#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x20000000)
+
+#endif /* _ASM_M32R_DMA_H */
--- /dev/null
+#ifndef _ASM_M32R__ELF_H
+#define _ASM_M32R__ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1999-2004, Renesas Technology Corp.
+ * Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/page.h>
+
+/* M32R relocation types */
+#define R_M32R_NONE 0
+#define R_M32R_16 1
+#define R_M32R_32 2
+#define R_M32R_24 3
+#define R_M32R_10_PCREL 4
+#define R_M32R_18_PCREL 5
+#define R_M32R_26_PCREL 6
+#define R_M32R_HI16_ULO 7
+#define R_M32R_HI16_SLO 8
+#define R_M32R_LO16 9
+#define R_M32R_SDA16 10
+#define R_M32R_GNU_VTINHERIT 11
+#define R_M32R_GNU_VTENTRY 12
+
+#define R_M32R_16_RELA 33
+#define R_M32R_32_RELA 34
+#define R_M32R_24_RELA 35
+#define R_M32R_10_PCREL_RELA 36
+#define R_M32R_18_PCREL_RELA 37
+#define R_M32R_26_PCREL_RELA 38
+#define R_M32R_HI16_ULO_RELA 39
+#define R_M32R_HI16_SLO_RELA 40
+#define R_M32R_LO16_RELA 41
+#define R_M32R_SDA16_RELA 42
+#define R_M32R_RELA_GNU_VTINHERIT 43
+#define R_M32R_RELA_GNU_VTENTRY 44
+
+#define R_M32R_GOT24 48
+#define R_M32R_26_PLTREL 49
+#define R_M32R_COPY 50
+#define R_M32R_GLOB_DAT 51
+#define R_M32R_JMP_SLOT 52
+#define R_M32R_RELATIVE 53
+#define R_M32R_GOTOFF 54
+#define R_M32R_GOTPC24 55
+#define R_M32R_GOT16_HI_ULO 56
+#define R_M32R_GOT16_HI_SLO 57
+#define R_M32R_GOT16_LO 58
+#define R_M32R_GOTPC_HI_ULO 59
+#define R_M32R_GOTPC_HI_SLO 60
+#define R_M32R_GOTPC_LO 61
+#define R_M32R_GOTOFF_HI_ULO 62
+#define R_M32R_GOTOFF_HI_SLO 63
+#define R_M32R_GOTOFF_LO 64
+
+#define R_M32R_NUM 256
+
+/*
+ * ELF register definitions..
+ */
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+/* We have no FP mumumu. */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_M32R) || ((x)->e_machine == EM_CYGNUS_M32R))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#if defined(__LITTLE_ENDIAN)
+#define ELF_DATA ELFDATA2LSB
+#elif defined(__BIG_ENDIAN)
+#define ELF_DATA ELFDATA2MSB
+#else
+#error no endian defined
+#endif
+#define ELF_ARCH EM_M32R
+
+/* r0 is set by ld.so to a pointer to a function which might be
+ * registered using 'atexit'. This provides a mean for the dynamic
+ * linker to call DT_FINI functions for shared libraries that have
+ * been loaded before the code runs.
+ *
+ * So that we can use the same startup file with static executables,
+ * we start programs with a value of 0 to indicate that there is no
+ * such function.
+ */
+#define ELF_PLAT_INIT(_r, load_addr) (_r)->r0 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader. We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ now struct_user_regs, they are different) */
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+ memcpy((char *)pr_reg, (char *)regs, sizeof (struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this CPU supports. */
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+#define ELF_PLATFORM (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif /* _ASM_M32R__ELF_H */
--- /dev/null
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
--- /dev/null
+#ifndef _ASM_M32R_ERRNO_H
+#define _ASM_M32R_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _ASM_M32R_ERRNO_H */
--- /dev/null
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+ unsigned long off)
+{
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H_ */
--- /dev/null
+#include <asm-generic/fcntl.h>
--- /dev/null
+/*
+ * include/asm-m32r/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2004 Kazuhiro Inaoka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_M32R_FLAT_H
+#define __ASM_M32R_FLAT_H
+
+#define flat_argvp_envp_on_stack() 0
+#define flat_old_ram_flag(flags) (flags)
+#define flat_set_persistent(relval, p) 0
+#define flat_reloc_valid(reloc, size) \
+ (((reloc) - textlen_for_m32r_lo16_data) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
+ m32r_flat_get_addr_from_rp(rp, relval, (text_len) )
+
+#define flat_put_addr_at_rp(rp, addr, relval) \
+ m32r_flat_put_addr_at_rp(rp, addr, relval)
+
+/* Convert a relocation entry into an address. */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+ return relval & 0x00ffffff; /* Mask out top 8-bits */
+}
+
+#define flat_m32r_get_reloc_type(relval) ((relval) >> 24)
+
+#define M32R_SETH_OPCODE 0xd0c00000 /* SETH instruction code */
+
+#define FLAT_M32R_32 0x00 /* 32bits reloc */
+#define FLAT_M32R_24 0x01 /* unsigned 24bits reloc */
+#define FLAT_M32R_16 0x02 /* 16bits reloc */
+#define FLAT_M32R_LO16 0x03 /* signed low 16bits reloc (low()) */
+#define FLAT_M32R_LO16_DATA 0x04 /* signed low 16bits reloc (low())
+ for a symbol in .data section */
+ /* High 16bits of an address used
+ when the lower 16bbits are treated
+ as unsigned.
+ To create SETH instruction only.
+ 0x1X: X means a number of register.
+ 0x10 - 0x3F are reserved. */
+#define FLAT_M32R_HI16_ULO 0x10 /* reloc for SETH Rn,#high(imm16) */
+ /* High 16bits of an address used
+ when the lower 16bbits are treated
+ as signed.
+ To create SETH instruction only.
+ 0x2X: X means a number of register.
+ 0x20 - 0x4F are reserved. */
+#define FLAT_M32R_HI16_SLO 0x20 /* reloc for SETH Rn,#shigh(imm16) */
+
+static unsigned long textlen_for_m32r_lo16_data = 0;
+
+static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp,
+ unsigned long relval,
+ unsigned long textlen)
+{
+ unsigned int reloc = flat_m32r_get_reloc_type (relval);
+ textlen_for_m32r_lo16_data = 0;
+ if (reloc & 0xf0) {
+ unsigned long addr = htonl(*rp);
+ switch (reloc & 0xf0)
+ {
+ case FLAT_M32R_HI16_ULO:
+ case FLAT_M32R_HI16_SLO:
+ if (addr == 0) {
+ /* put "seth Rn,#0x0" instead of 0 (addr). */
+ *rp = (M32R_SETH_OPCODE | ((reloc & 0x0f)<<24));
+ }
+ return addr;
+ default:
+ break;
+ }
+ } else {
+ switch (reloc)
+ {
+ case FLAT_M32R_LO16:
+ return htonl(*rp) & 0xFFFF;
+ case FLAT_M32R_LO16_DATA:
+ /* FIXME: The return value will decrease by textlen
+ at m32r_flat_put_addr_at_rp () */
+ textlen_for_m32r_lo16_data = textlen;
+ return (htonl(*rp) & 0xFFFF) + textlen;
+ case FLAT_M32R_16:
+ return htons(*(unsigned short *)rp) & 0xFFFF;
+ case FLAT_M32R_24:
+ return htonl(*rp) & 0xFFFFFF;
+ case FLAT_M32R_32:
+ return htonl(*rp);
+ default:
+ break;
+ }
+ }
+ return ~0; /* bogus value */
+}
+
+static inline void m32r_flat_put_addr_at_rp (unsigned long *rp,
+ unsigned long addr,
+ unsigned long relval)
+{
+ unsigned int reloc = flat_m32r_get_reloc_type (relval);
+ if (reloc & 0xf0) {
+ unsigned long Rn = reloc & 0x0f; /* get a number of register */
+ Rn <<= 24; /* 0x0R000000 */
+ reloc &= 0xf0;
+ switch (reloc)
+ {
+ case FLAT_M32R_HI16_ULO: /* To create SETH Rn,#high(imm16) */
+ *rp = (M32R_SETH_OPCODE | Rn
+ | ((addr >> 16) & 0xFFFF));
+ break;
+ case FLAT_M32R_HI16_SLO: /* To create SETH Rn,#shigh(imm16) */
+ *rp = (M32R_SETH_OPCODE | Rn
+ | (((addr >> 16) + ((addr & 0x8000) ? 1 : 0))
+ & 0xFFFF));
+ break;
+ }
+ } else {
+ switch (reloc) {
+ case FLAT_M32R_LO16_DATA:
+ addr -= textlen_for_m32r_lo16_data;
+ textlen_for_m32r_lo16_data = 0;
+ case FLAT_M32R_LO16:
+ *rp = (htonl(*rp) & 0xFFFF0000) | (addr & 0xFFFF);
+ break;
+ case FLAT_M32R_16:
+ *(unsigned short *)rp = addr & 0xFFFF;
+ break;
+ case FLAT_M32R_24:
+ *rp = (htonl(*rp) & 0xFF000000) | (addr & 0xFFFFFF);
+ break;
+ case FLAT_M32R_32:
+ *rp = addr;
+ break;
+ }
+ }
+}
+
+#endif /* __ASM_M32R_FLAT_H */
--- /dev/null
+/* empty */
--- /dev/null
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
--- /dev/null
+#ifdef __KERNEL__
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#if NR_IRQS > 256
+#define HARDIRQ_BITS 9
+#else
+#define HARDIRQ_BITS 8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+static inline void ack_bad_irq(int irq)
+{
+ printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
+ BUG();
+}
+
+#endif /* __ASM_HARDIRQ_H */
+#endif /* __KERNEL__ */
--- /dev/null
+#ifndef _ASM_M32R_HW_IRQ_H
+#define _ASM_M32R_HW_IRQ_H
+
+#endif /* _ASM_M32R_HW_IRQ_H */
--- /dev/null
+#ifndef _ASM_M32R_IO_H
+#define _ASM_M32R_IO_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <asm/page.h> /* __va */
+
+#ifdef __KERNEL__
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+/**
+ * virt_to_phys - map virtual addresses to physical
+ * @address: address to remap
+ *
+ * The returned physical address is the physical (CPU) mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses directly mapped or allocated via kmalloc.
+ *
+ * This function does not give bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+ return __pa(address);
+}
+
+/**
+ * phys_to_virt - map physical address to virtual
+ * @address: address to remap
+ *
+ * The returned virtual address is a current CPU mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses that have a kernel mapping
+ *
+ * This function does not handle bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+extern void __iomem *
+__ioremap(unsigned long offset, unsigned long size, unsigned long flags);
+
+/**
+ * ioremap - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ */
+
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+ return __ioremap(offset, size, 0);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+#define ioremap_nocache(off,size) ioremap(off,size)
+
+/*
+ * IO bus memory addresses are also 1:1 with the physical address
+ */
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+#define page_to_bus page_to_phys
+#define virt_to_bus virt_to_phys
+
+extern unsigned char _inb(unsigned long);
+extern unsigned short _inw(unsigned long);
+extern unsigned long _inl(unsigned long);
+extern unsigned char _inb_p(unsigned long);
+extern unsigned short _inw_p(unsigned long);
+extern unsigned long _inl_p(unsigned long);
+extern void _outb(unsigned char, unsigned long);
+extern void _outw(unsigned short, unsigned long);
+extern void _outl(unsigned long, unsigned long);
+extern void _outb_p(unsigned char, unsigned long);
+extern void _outw_p(unsigned short, unsigned long);
+extern void _outl_p(unsigned long, unsigned long);
+extern void _insb(unsigned int, void *, unsigned long);
+extern void _insw(unsigned int, void *, unsigned long);
+extern void _insl(unsigned int, void *, unsigned long);
+extern void _outsb(unsigned int, const void *, unsigned long);
+extern void _outsw(unsigned int, const void *, unsigned long);
+extern void _outsl(unsigned int, const void *, unsigned long);
+
+static inline unsigned char _readb(unsigned long addr)
+{
+ return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short _readw(unsigned long addr)
+{
+ return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned long _readl(unsigned long addr)
+{
+ return *(volatile unsigned long __force *)addr;
+}
+
+static inline void _writeb(unsigned char b, unsigned long addr)
+{
+ *(volatile unsigned char __force *)addr = b;
+}
+
+static inline void _writew(unsigned short w, unsigned long addr)
+{
+ *(volatile unsigned short __force *)addr = w;
+}
+
+static inline void _writel(unsigned long l, unsigned long addr)
+{
+ *(volatile unsigned long __force *)addr = l;
+}
+
+#define inb _inb
+#define inw _inw
+#define inl _inl
+#define outb _outb
+#define outw _outw
+#define outl _outl
+
+#define inb_p _inb_p
+#define inw_p _inw_p
+#define inl_p _inl_p
+#define outb_p _outb_p
+#define outw_p _outw_p
+#define outl_p _outl_p
+
+#define insb _insb
+#define insw _insw
+#define insl _insl
+#define outsb _outsb
+#define outsw _outsw
+#define outsl _outsl
+
+#define readb(addr) _readb((unsigned long)(addr))
+#define readw(addr) _readw((unsigned long)(addr))
+#define readl(addr) _readl((unsigned long)(addr))
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+#define writeb(val, addr) _writeb((val), (unsigned long)(addr))
+#define writew(val, addr) _writew((val), (unsigned long)(addr))
+#define writel(val, addr) _writel((val), (unsigned long)(addr))
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define mmiowb()
+
+#define flush_write_buffers() do { } while (0) /* M32R_FIXME */
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+ memset((void __force *) addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, volatile void __iomem *src, int count)
+{
+ memcpy(dst, (void __force *) src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+ memcpy((void __force *) dst, src, count);
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+#ifndef __ARCH_M32R_IOCTLS_H__
+#define __ARCH_M32R_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
+#define FIOQSIZE 0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* __ARCH_M32R_IOCTLS_H__ */
--- /dev/null
+#ifndef _ASM_M32R_IPCBUF_H
+#define _ASM_M32R_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for m32r architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_M32R_IPCBUF_H */
--- /dev/null
+#ifdef __KERNEL__
+#ifndef _ASM_M32R_IRQ_H
+#define _ASM_M32R_IRQ_H
+
+
+#if defined(CONFIG_PLAT_USRV)
+/*
+ * IRQ definitions for M32700UT
+ * M32700 Chip: 64 interrupts
+ * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ */
+#define M32700UT_NUM_CPU_IRQ (64)
+#define M32700UT_NUM_PLD_IRQ (32)
+#define M32700UT_IRQ_BASE 0
+#define M32700UT_CPU_IRQ_BASE M32700UT_IRQ_BASE
+#define M32700UT_PLD_IRQ_BASE (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ)
+
+#define NR_IRQS (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ)
+#elif defined(CONFIG_PLAT_M32700UT)
+/*
+ * IRQ definitions for M32700UT(Rev.C) + M32R-LAN
+ * M32700 Chip: 64 interrupts
+ * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin
+ * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin
+ */
+#define M32700UT_NUM_CPU_IRQ (64)
+#define M32700UT_NUM_PLD_IRQ (32)
+#define M32700UT_NUM_LCD_PLD_IRQ (32)
+#define M32700UT_NUM_LAN_PLD_IRQ (32)
+#define M32700UT_IRQ_BASE 0
+#define M32700UT_CPU_IRQ_BASE (M32700UT_IRQ_BASE)
+#define M32700UT_PLD_IRQ_BASE \
+ (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ)
+#define M32700UT_LCD_PLD_IRQ_BASE \
+ (M32700UT_PLD_IRQ_BASE + M32700UT_NUM_PLD_IRQ)
+#define M32700UT_LAN_PLD_IRQ_BASE \
+ (M32700UT_LCD_PLD_IRQ_BASE + M32700UT_NUM_LCD_PLD_IRQ)
+
+#define NR_IRQS \
+ (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ \
+ + M32700UT_NUM_LCD_PLD_IRQ + M32700UT_NUM_LAN_PLD_IRQ)
+#elif defined(CONFIG_PLAT_OPSPUT)
+/*
+ * IRQ definitions for OPSPUT + M32R-LAN
+ * OPSP Chip: 64 interrupts
+ * ICU of OPSPUT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin
+ * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin
+ */
+#define OPSPUT_NUM_CPU_IRQ (64)
+#define OPSPUT_NUM_PLD_IRQ (32)
+#define OPSPUT_NUM_LCD_PLD_IRQ (32)
+#define OPSPUT_NUM_LAN_PLD_IRQ (32)
+#define OPSPUT_IRQ_BASE 0
+#define OPSPUT_CPU_IRQ_BASE (OPSPUT_IRQ_BASE)
+#define OPSPUT_PLD_IRQ_BASE \
+ (OPSPUT_CPU_IRQ_BASE + OPSPUT_NUM_CPU_IRQ)
+#define OPSPUT_LCD_PLD_IRQ_BASE \
+ (OPSPUT_PLD_IRQ_BASE + OPSPUT_NUM_PLD_IRQ)
+#define OPSPUT_LAN_PLD_IRQ_BASE \
+ (OPSPUT_LCD_PLD_IRQ_BASE + OPSPUT_NUM_LCD_PLD_IRQ)
+
+#define NR_IRQS \
+ (OPSPUT_NUM_CPU_IRQ + OPSPUT_NUM_PLD_IRQ \
+ + OPSPUT_NUM_LCD_PLD_IRQ + OPSPUT_NUM_LAN_PLD_IRQ)
+
+#elif defined(CONFIG_PLAT_M32104UT)
+/*
+ * IRQ definitions for M32104UT
+ * M32104 Chip: 64 interrupts
+ * ICU of M32104UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
+ */
+#define M32104UT_NUM_CPU_IRQ (64)
+#define M32104UT_NUM_PLD_IRQ (32)
+#define M32104UT_IRQ_BASE 0
+#define M32104UT_CPU_IRQ_BASE M32104UT_IRQ_BASE
+#define M32104UT_PLD_IRQ_BASE (M32104UT_CPU_IRQ_BASE + M32104UT_NUM_CPU_IRQ)
+
+#define NR_IRQS \
+ (M32104UT_NUM_CPU_IRQ + M32104UT_NUM_PLD_IRQ)
+
+#else
+#define NR_IRQS 64
+#endif
+
+#define irq_canonicalize(irq) (irq)
+
+#endif /* _ASM_M32R_IRQ_H */
+#endif /* __KERNEL__ */
--- /dev/null
+#include <asm-generic/irq_regs.h>
--- /dev/null
+#include <asm-generic/kdebug.h>
--- /dev/null
+#ifndef __M32R_KMAP_TYPES_H
+#define __M32R_KMAP_TYPES_H
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0) KM_BOUNCE_READ,
+D(1) KM_SKB_SUNRPC_DATA,
+D(2) KM_SKB_DATA_SOFTIRQ,
+D(3) KM_USER0,
+D(4) KM_USER1,
+D(5) KM_BIO_SRC_IRQ,
+D(6) KM_BIO_DST_IRQ,
+D(7) KM_PTE0,
+D(8) KM_PTE1,
+D(9) KM_IRQ0,
+D(10) KM_IRQ1,
+D(11) KM_SOFTIRQ0,
+D(12) KM_SOFTIRQ1,
+D(13) KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* __M32R_KMAP_TYPES_H */
--- /dev/null
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 4
+#define __ALIGN_STR ".balign 4"
+
+#endif /* __ASM_LINKAGE_H */
--- /dev/null
+#ifndef __M32R_LOCAL_H
+#define __M32R_LOCAL_H
+
+/*
+ * linux/include/asm-m32r/local.h
+ *
+ * M32R version:
+ * Copyright (C) 2001, 2002 Hitoshi Yamamoto
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ * Copyright (C) 2007 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
+ */
+
+#include <linux/percpu.h>
+#include <asm/assembler.h>
+#include <asm/system.h>
+#include <asm/local.h>
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+/*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+ * not some alias that contains the same information.
+ */
+typedef struct { volatile int counter; } local_t;
+
+#define LOCAL_INIT(i) { (i) }
+
+/**
+ * local_read - read local variable
+ * @l: pointer of type local_t
+ *
+ * Atomically reads the value of @l.
+ */
+#define local_read(l) ((l)->counter)
+
+/**
+ * local_set - set local variable
+ * @l: pointer of type local_t
+ * @i: required value
+ *
+ * Atomically sets the value of @l to @i.
+ */
+#define local_set(l, i) (((l)->counter) = (i))
+
+/**
+ * local_add_return - add long to local variable and return it
+ * @i: long value to add
+ * @l: pointer of type local_t
+ *
+ * Atomically adds @i to @l and return (@i + @l).
+ */
+static inline long local_add_return(long i, local_t *l)
+{
+ unsigned long flags;
+ long result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# local_add_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ "ld %0, @%1; \n\t"
+ "add %0, %2; \n\t"
+ "st %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&l->counter), "r" (i)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * local_sub_return - subtract long from local variable and return it
+ * @i: long value to subtract
+ * @l: pointer of type local_t
+ *
+ * Atomically subtracts @i from @l and return (@l - @i).
+ */
+static inline long local_sub_return(long i, local_t *l)
+{
+ unsigned long flags;
+ long result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# local_sub_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ "ld %0, @%1; \n\t"
+ "sub %0, %2; \n\t"
+ "st %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&l->counter), "r" (i)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * local_add - add long to local variable
+ * @i: long value to add
+ * @l: pointer of type local_t
+ *
+ * Atomically adds @i to @l.
+ */
+#define local_add(i, l) ((void) local_add_return((i), (l)))
+
+/**
+ * local_sub - subtract the local variable
+ * @i: long value to subtract
+ * @l: pointer of type local_t
+ *
+ * Atomically subtracts @i from @l.
+ */
+#define local_sub(i, l) ((void) local_sub_return((i), (l)))
+
+/**
+ * local_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @l: pointer of type local_t
+ *
+ * Atomically subtracts @i from @l and returns
+ * true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0)
+
+/**
+ * local_inc_return - increment local variable and return it
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1 and returns the result.
+ */
+static inline long local_inc_return(local_t *l)
+{
+ unsigned long flags;
+ long result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# local_inc_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ "ld %0, @%1; \n\t"
+ "addi %0, #1; \n\t"
+ "st %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&l->counter)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * local_dec_return - decrement local variable and return it
+ * @l: pointer of type local_t
+ *
+ * Atomically decrements @l by 1 and returns the result.
+ */
+static inline long local_dec_return(local_t *l)
+{
+ unsigned long flags;
+ long result;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# local_dec_return \n\t"
+ DCACHE_CLEAR("%0", "r4", "%1")
+ "ld %0, @%1; \n\t"
+ "addi %0, #-1; \n\t"
+ "st %0, @%1; \n\t"
+ : "=&r" (result)
+ : "r" (&l->counter)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return result;
+}
+
+/**
+ * local_inc - increment local variable
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1.
+ */
+#define local_inc(l) ((void)local_inc_return(l))
+
+/**
+ * local_dec - decrement local variable
+ * @l: pointer of type local_t
+ *
+ * Atomically decrements @l by 1.
+ */
+#define local_dec(l) ((void)local_dec_return(l))
+
+/**
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+/**
+ * local_dec_and_test - decrement and test
+ * @l: pointer of type local_t
+ *
+ * Atomically decrements @l by 1 and
+ * returns true if the result is 0, or false for all
+ * other cases.
+ */
+#define local_dec_and_test(l) (local_dec_return(l) == 0)
+
+/**
+ * local_add_negative - add and test if negative
+ * @l: pointer of type local_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @l and returns true
+ * if the result is negative, or false when
+ * result is greater than or equal to zero.
+ */
+#define local_add_negative(i, l) (local_add_return((i), (l)) < 0)
+
+#define local_cmpxchg(l, o, n) (cmpxchg_local(&((l)->counter), (o), (n)))
+#define local_xchg(v, new) (xchg_local(&((l)->counter), new))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to l...
+ * @u: ...unless l is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+static inline int local_add_unless(local_t *l, long a, long u)
+{
+ long c, old;
+ c = local_read(l);
+ for (;;) {
+ if (unlikely(c == (u)))
+ break;
+ old = local_cmpxchg((l), c, c + (a));
+ if (likely(old == c))
+ break;
+ c = old;
+ }
+ return c != (u);
+}
+
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+static inline void local_clear_mask(unsigned long mask, local_t *addr)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# local_clear_mask \n\t"
+ DCACHE_CLEAR("%0", "r5", "%1")
+ "ld %0, @%1; \n\t"
+ "and %0, %2; \n\t"
+ "st %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (addr), "r" (~mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r5"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+static inline void local_set_mask(unsigned long mask, local_t *addr)
+{
+ unsigned long flags;
+ unsigned long tmp;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ "# local_set_mask \n\t"
+ DCACHE_CLEAR("%0", "r5", "%1")
+ "ld %0, @%1; \n\t"
+ "or %0, %2; \n\t"
+ "st %0, @%1; \n\t"
+ : "=&r" (tmp)
+ : "r" (addr), "r" (mask)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r5"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+}
+
+/* Atomic operations are already serializing on m32r */
+#define smp_mb__before_local_dec() barrier()
+#define smp_mb__after_local_dec() barrier()
+#define smp_mb__before_local_inc() barrier()
+#define smp_mb__after_local_inc() barrier()
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations. Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l) ((l)->a.counter++)
+#define __local_dec(l) ((l)->a.counter++)
+#define __local_add(i, l) ((l)->a.counter += (i))
+#define __local_sub(i, l) ((l)->a.counter -= (i))
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations. Note they take
+ * a variable, not an address.
+ */
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+ still access a variable of a previous CPU in a non local way. */
+#define cpu_local_wrap_v(l) \
+ ({ local_t res__; \
+ preempt_disable(); \
+ res__ = (l); \
+ preempt_enable(); \
+ res__; })
+#define cpu_local_wrap(l) \
+ ({ preempt_disable(); \
+ l; \
+ preempt_enable(); }) \
+
+#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l) cpu_local_inc(l)
+#define __cpu_local_dec(l) cpu_local_dec(l)
+#define __cpu_local_add(i, l) cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l) cpu_local_sub((i), (l))
+
+#endif /* __M32R_LOCAL_H */
--- /dev/null
+#ifndef _M32102_H_
+#define _M32102_H_
+
+/*
+ * Renesas M32R 32102 group
+ *
+ * Copyright (c) 2001 Hitoshi Yamamoto
+ * Copyright (c) 2003, 2004 Renesas Technology Corp.
+ */
+
+/*======================================================================*
+ * Special Function Register
+ *======================================================================*/
+#if !defined(CONFIG_CHIP_M32104)
+#define M32R_SFR_OFFSET (0x00E00000) /* 0x00E00000-0x00EFFFFF 1[MB] */
+#else
+#define M32R_SFR_OFFSET (0x00700000) /* 0x00700000-0x007FFFFF 1[MB] */
+#endif
+
+/*
+ * Clock and Power Management registers.
+ */
+#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET)
+
+#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET)
+#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET)
+#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET)
+
+/*
+ * DMA Controller registers.
+ */
+#define M32R_DMA_OFFSET (0x000F8000+M32R_SFR_OFFSET)
+
+#define M32R_DMAEN_PORTL (0x000+M32R_DMA_OFFSET)
+#define M32R_DMAISTS_PORTL (0x004+M32R_DMA_OFFSET)
+#define M32R_DMAEDET_PORTL (0x008+M32R_DMA_OFFSET)
+#define M32R_DMAASTS_PORTL (0x00c+M32R_DMA_OFFSET)
+
+#define M32R_DMA0CR0_PORTL (0x100+M32R_DMA_OFFSET)
+#define M32R_DMA0CR1_PORTL (0x104+M32R_DMA_OFFSET)
+#define M32R_DMA0CSA_PORTL (0x108+M32R_DMA_OFFSET)
+#define M32R_DMA0RSA_PORTL (0x10c+M32R_DMA_OFFSET)
+#define M32R_DMA0CDA_PORTL (0x110+M32R_DMA_OFFSET)
+#define M32R_DMA0RDA_PORTL (0x114+M32R_DMA_OFFSET)
+#define M32R_DMA0CBCUT_PORTL (0x118+M32R_DMA_OFFSET)
+#define M32R_DMA0RBCUT_PORTL (0x11c+M32R_DMA_OFFSET)
+
+#define M32R_DMA1CR0_PORTL (0x200+M32R_DMA_OFFSET)
+#define M32R_DMA1CR1_PORTL (0x204+M32R_DMA_OFFSET)
+#define M32R_DMA1CSA_PORTL (0x208+M32R_DMA_OFFSET)
+#define M32R_DMA1RSA_PORTL (0x20c+M32R_DMA_OFFSET)
+#define M32R_DMA1CDA_PORTL (0x210+M32R_DMA_OFFSET)
+#define M32R_DMA1RDA_PORTL (0x214+M32R_DMA_OFFSET)
+#define M32R_DMA1CBCUT_PORTL (0x218+M32R_DMA_OFFSET)
+#define M32R_DMA1RBCUT_PORTL (0x21c+M32R_DMA_OFFSET)
+
+/*
+ * Multi Function Timer registers.
+ */
+#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET)
+
+#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */
+#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */
+
+#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET)
+#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */
+#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */
+#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */
+#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */
+#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */
+
+#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET)
+#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */
+#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */
+#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */
+#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */
+#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */
+
+#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET)
+#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */
+#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */
+#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */
+#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */
+#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */
+
+#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET)
+#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */
+#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */
+#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */
+#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */
+#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */
+
+#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET)
+#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */
+#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */
+#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */
+#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */
+#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */
+
+#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET)
+#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */
+#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */
+#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */
+#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */
+#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */
+
+#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \
+ || defined(CONFIG_CHIP_M32104)
+#define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */
+#define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */
+#define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */
+#define M32R_MFTCR_MFT3MSK (1UL<<28) /* b3 */
+#define M32R_MFTCR_MFT4MSK (1UL<<27) /* b4 */
+#define M32R_MFTCR_MFT5MSK (1UL<<26) /* b5 */
+#define M32R_MFTCR_MFT0EN (1UL<<23) /* b8 */
+#define M32R_MFTCR_MFT1EN (1UL<<22) /* b9 */
+#define M32R_MFTCR_MFT2EN (1UL<<21) /* b10 */
+#define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */
+#define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */
+#define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */
+#else
+#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */
+#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */
+#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */
+#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */
+#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */
+#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */
+#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */
+#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */
+#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */
+#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */
+#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */
+#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */
+#endif
+
+#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */
+#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */
+#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */
+#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */
+#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */
+#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */
+#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */
+#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */
+#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */
+#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */
+#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */
+#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */
+#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */
+#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */
+#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */
+
+/*
+ * Serial I/O registers.
+ */
+#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET)
+
+#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET)
+#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET)
+#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET)
+#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET)
+#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET)
+#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET)
+#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET)
+
+/*
+ * Interrupt Control Unit registers.
+ */
+#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET)
+#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET)
+#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET)
+#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET)
+#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */
+#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */
+#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */
+#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */
+#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */
+#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */
+#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */
+#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */
+#define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */
+#define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */
+#define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */
+#define M32R_ICU_CR19_PORTL (0x248+M32R_ICU_OFFSET) /* MFT3 */
+#define M32R_ICU_CR20_PORTL (0x24C+M32R_ICU_OFFSET) /* MFT4 */
+#define M32R_ICU_CR21_PORTL (0x250+M32R_ICU_OFFSET) /* MFT5 */
+#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* DMA0 */
+#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* DMA1 */
+#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* SIO0 */
+#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* SIO0 */
+#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* SIO1 */
+#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* SIO1 */
+#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* SIO2 */
+#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* SIO2 */
+#define M32R_ICU_CR54_PORTL (0x2D4+M32R_ICU_OFFSET) /* SIO3 */
+#define M32R_ICU_CR55_PORTL (0x2D8+M32R_ICU_OFFSET) /* SIO3 */
+#define M32R_ICU_CR56_PORTL (0x2DC+M32R_ICU_OFFSET) /* SIO4 */
+#define M32R_ICU_CR57_PORTL (0x2E0+M32R_ICU_OFFSET) /* SIO4 */
+
+#ifdef CONFIG_SMP
+#define M32R_ICU_IPICR0_PORTL (0x2dc+M32R_ICU_OFFSET) /* IPI0 */
+#define M32R_ICU_IPICR1_PORTL (0x2e0+M32R_ICU_OFFSET) /* IPI1 */
+#define M32R_ICU_IPICR2_PORTL (0x2e4+M32R_ICU_OFFSET) /* IPI2 */
+#define M32R_ICU_IPICR3_PORTL (0x2e8+M32R_ICU_OFFSET) /* IPI3 */
+#define M32R_ICU_IPICR4_PORTL (0x2ec+M32R_ICU_OFFSET) /* IPI4 */
+#define M32R_ICU_IPICR5_PORTL (0x2f0+M32R_ICU_OFFSET) /* IPI5 */
+#define M32R_ICU_IPICR6_PORTL (0x2f4+M32R_ICU_OFFSET) /* IPI6 */
+#define M32R_ICU_IPICR7_PORTL (0x2f8+M32R_ICU_OFFSET) /* IPI7 */
+#endif /* CONFIG_SMP */
+
+#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */
+#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */
+#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */
+#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */
+#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */
+#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */
+#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */
+#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */
+
+#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */
+#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */
+#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */
+#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */
+#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/
+#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */
+#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */
+#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */
+#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */
+#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */
+#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */
+#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */
+#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */
+#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */
+
+#define M32R_IRQ_INT0 (1) /* INT0 */
+#define M32R_IRQ_INT1 (2) /* INT1 */
+#define M32R_IRQ_INT2 (3) /* INT2 */
+#define M32R_IRQ_INT3 (4) /* INT3 */
+#define M32R_IRQ_INT4 (5) /* INT4 */
+#define M32R_IRQ_INT5 (6) /* INT5 */
+#define M32R_IRQ_INT6 (7) /* INT6 */
+#define M32R_IRQ_MFT0 (16) /* MFT0 */
+#define M32R_IRQ_MFT1 (17) /* MFT1 */
+#define M32R_IRQ_MFT2 (18) /* MFT2 */
+#define M32R_IRQ_MFT3 (19) /* MFT3 */
+#ifdef CONFIG_CHIP_M32104
+#define M32R_IRQ_MFTX0 (24) /* MFTX0 */
+#define M32R_IRQ_MFTX1 (25) /* MFTX1 */
+#define M32R_IRQ_DMA0 (32) /* DMA0 */
+#define M32R_IRQ_DMA1 (33) /* DMA1 */
+#define M32R_IRQ_DMA2 (34) /* DMA2 */
+#define M32R_IRQ_DMA3 (35) /* DMA3 */
+#define M32R_IRQ_SIO0_R (40) /* SIO0 send */
+#define M32R_IRQ_SIO0_S (41) /* SIO0 receive */
+#define M32R_IRQ_SIO1_R (42) /* SIO1 send */
+#define M32R_IRQ_SIO1_S (43) /* SIO1 receive */
+#define M32R_IRQ_SIO2_R (44) /* SIO2 send */
+#define M32R_IRQ_SIO2_S (45) /* SIO2 receive */
+#define M32R_IRQ_SIO3_R (46) /* SIO3 send */
+#define M32R_IRQ_SIO3_S (47) /* SIO3 receive */
+#define M32R_IRQ_ADC (56) /* ADC */
+#define M32R_IRQ_PC (57) /* PC */
+#else /* ! M32104 */
+#define M32R_IRQ_DMA0 (32) /* DMA0 */
+#define M32R_IRQ_DMA1 (33) /* DMA1 */
+#define M32R_IRQ_SIO0_R (48) /* SIO0 send */
+#define M32R_IRQ_SIO0_S (49) /* SIO0 receive */
+#define M32R_IRQ_SIO1_R (50) /* SIO1 send */
+#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */
+#define M32R_IRQ_SIO2_R (52) /* SIO2 send */
+#define M32R_IRQ_SIO2_S (53) /* SIO2 receive */
+#define M32R_IRQ_SIO3_R (54) /* SIO3 send */
+#define M32R_IRQ_SIO3_S (55) /* SIO3 receive */
+#define M32R_IRQ_SIO4_R (56) /* SIO4 send */
+#define M32R_IRQ_SIO4_S (57) /* SIO4 receive */
+#endif /* ! M32104 */
+
+#ifdef CONFIG_SMP
+#define M32R_IRQ_IPI0 (56)
+#define M32R_IRQ_IPI1 (57)
+#define M32R_IRQ_IPI2 (58)
+#define M32R_IRQ_IPI3 (59)
+#define M32R_IRQ_IPI4 (60)
+#define M32R_IRQ_IPI5 (61)
+#define M32R_IRQ_IPI6 (62)
+#define M32R_IRQ_IPI7 (63)
+#define M32R_CPUID_PORTL (0xffffffe0)
+
+#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET)
+
+#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME3_PORTL (0x1c+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID3_PORTL (0x2c+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP)
+
+#endif /* CONFIG_SMP */
+
+#ifndef __ASSEMBLY__
+typedef struct {
+ unsigned long icucr; /* ICU Control Register */
+} icu_data_t;
+#endif
+
+#endif /* _M32102_H_ */
--- /dev/null
+#ifndef _M32104UT_M32104UT_PLD_H
+#define _M32104UT_M32104UT_PLD_H
+
+/*
+ * include/asm-m32r/m32104ut/m32104ut_pld.h
+ *
+ * Definitions for Programable Logic Device(PLD) on M32104UT board.
+ * Based on m32700ut_pld.h
+ *
+ * Copyright (c) 2002 Takeo Takahashi
+ * Copyright (c) 2005 Naoto Sugai
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#if defined(CONFIG_PLAT_M32104UT)
+#define PLD_PLAT_BASE 0x02c00000
+#else
+#error "no platform configuration"
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
+#define __reg8 (volatile unsigned char *)
+#define __reg16 (volatile unsigned short *)
+#define __reg32 (volatile unsigned int *)
+#else
+#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
+
+/* MMC */
+#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
+
+/* ICU
+ * ICUISTS: status register
+ * ICUIREQ0: request register
+ * ICUIREQ1: request register
+ * ICUCR3: control register for CFIREQ# interrupt
+ * ICUCR4: control register for CFC Card insert interrupt
+ * ICUCR5: control register for CFC Card eject interrupt
+ * ICUCR6: control register for external interrupt
+ * ICUCR11: control register for MMC Card insert/eject interrupt
+ * ICUCR13: control register for SC error interrupt
+ * ICUCR14: control register for SC receive interrupt
+ * ICUCR15: control register for SC send interrupt
+ */
+
+#define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */
+#define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */
+#define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */
+#define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */
+#define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */
+#define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
+#define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */
+#define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */
+#define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */
+
+#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
+#define PLD_ICUISTS_VECB_MASK (0xf000)
+#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
+#define PLD_ICUISTS_ISN_MASK (0x07c0)
+#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
+#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
+#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
+#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
+#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
+#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
+#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
+#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
+#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
+#define PLD_ICUCR_IEN (0x1000)
+#define PLD_ICUCR_IREQ (0x0100)
+#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
+#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
+#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
+#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
+#define PLD_ICUCR_ILEVEL0 (0x0000)
+#define PLD_ICUCR_ILEVEL1 (0x0001)
+#define PLD_ICUCR_ILEVEL2 (0x0002)
+#define PLD_ICUCR_ILEVEL3 (0x0003)
+#define PLD_ICUCR_ILEVEL4 (0x0004)
+#define PLD_ICUCR_ILEVEL5 (0x0005)
+#define PLD_ICUCR_ILEVEL6 (0x0006)
+#define PLD_ICUCR_ILEVEL7 (0x0007)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
+#define PLD_CPCR_CDP 0x0001
+
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON 0x001
+#define PLD_IOLED_1_OFF 0x000
+#define PLD_IOLED_2_ON 0x002
+#define PLD_IOLED_2_OFF 0x000
+
+/* DIP Switch
+ * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ * 1: -
+ * 2: -
+ * 3: -
+ */
+#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2 0x0200
+#define PLD_IOSWSTS_IOSW1 0x0100
+#define PLD_IOSWSTS_IOWP0 0x0001
+
+/* CRC */
+#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
+
+/* RTC */
+#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
+
+/* SIM Card */
+#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
+
+#endif /* _M32104UT_M32104UT_PLD_H */
--- /dev/null
+#ifndef _M32700UT_M32700UT_LAN_H
+#define _M32700UT_M32700UT_LAN_H
+
+/*
+ * include/asm-m32r/m32700ut/m32700ut_lan.h
+ *
+ * M32700UT-LAN board
+ *
+ * Copyright (c) 2002 Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define M32700UT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define M32700UT_LAN_BASE (0x10000000 + NONCACHE_OFFSET)
+#endif /* __ASSEMBLY__ */
+
+/* ICU
+ * ICUISTS: status register
+ * ICUIREQ0: request register
+ * ICUIREQ1: request register
+ * ICUCR3: control register for CFIREQ# interrupt
+ * ICUCR4: control register for CFC Card insert interrupt
+ * ICUCR5: control register for CFC Card eject interrupt
+ * ICUCR6: control register for external interrupt
+ * ICUCR11: control register for MMC Card insert/eject interrupt
+ * ICUCR13: control register for SC error interrupt
+ * ICUCR14: control register for SC receive interrupt
+ * ICUCR15: control register for SC send interrupt
+ * ICUCR16: control register for SIO0 receive interrupt
+ * ICUCR17: control register for SIO0 send interrupt
+ */
+#define M32700UT_LAN_IRQ_LAN (M32700UT_LAN_PLD_IRQ_BASE + 1) /* LAN */
+#define M32700UT_LAN_IRQ_I2C (M32700UT_LAN_PLD_IRQ_BASE + 3) /* I2C */
+
+#define M32700UT_LAN_ICUISTS __reg16(M32700UT_LAN_BASE + 0xc0002)
+#define M32700UT_LAN_ICUISTS_VECB_MASK (0xf000)
+#define M32700UT_LAN_VECB(x) ((x) & M32700UT_LAN_ICUISTS_VECB_MASK)
+#define M32700UT_LAN_ICUISTS_ISN_MASK (0x07c0)
+#define M32700UT_LAN_ICUISTS_ISN(x) ((x) & M32700UT_LAN_ICUISTS_ISN_MASK)
+#define M32700UT_LAN_ICUIREQ0 __reg16(M32700UT_LAN_BASE + 0xc0004)
+#define M32700UT_LAN_ICUCR1 __reg16(M32700UT_LAN_BASE + 0xc0010)
+#define M32700UT_LAN_ICUCR3 __reg16(M32700UT_LAN_BASE + 0xc0014)
+
+/*
+ * AR register on PLD
+ */
+#define ARVCR0 __reg32(M32700UT_LAN_BASE + 0x40000)
+#define ARVCR0_VDS 0x00080000
+#define ARVCR0_RST 0x00010000
+#define ARVCR1 __reg32(M32700UT_LAN_BASE + 0x40004)
+#define ARVCR1_QVGA 0x02000000
+#define ARVCR1_NORMAL 0x01000000
+#define ARVCR1_HIEN 0x00010000
+#define ARVHCOUNT __reg32(M32700UT_LAN_BASE + 0x40008)
+#define ARDATA __reg32(M32700UT_LAN_BASE + 0x40010)
+#define ARINTSEL __reg32(M32700UT_LAN_BASE + 0x40014)
+#define ARINTSEL_INT3 0x10000000 /* CPU INT3 */
+#define ARDATA32 __reg32(M32700UT_LAN_BASE + 0x04040010) // Block 5
+/*
+#define ARINTSEL_SEL2 0x00002000
+#define ARINTSEL_SEL3 0x00001000
+#define ARINTSEL_SEL6 0x00000200
+#define ARINTSEL_SEL7 0x00000100
+#define ARINTSEL_SEL9 0x00000040
+#define ARINTSEL_SEL10 0x00000020
+#define ARINTSEL_SEL11 0x00000010
+#define ARINTSEL_SEL12 0x00000008
+*/
+
+/*
+ * I2C register on PLD
+ */
+#define PLDI2CCR __reg32(M32700UT_LAN_BASE + 0x40040)
+#define PLDI2CCR_ES0 0x00000001 /* enable I2C interface */
+#define PLDI2CMOD __reg32(M32700UT_LAN_BASE + 0x40044)
+#define PLDI2CMOD_ACKCLK 0x00000200
+#define PLDI2CMOD_DTWD 0x00000100
+#define PLDI2CMOD_10BT 0x00000004
+#define PLDI2CMOD_ATM_NORMAL 0x00000000
+#define PLDI2CMOD_ATM_AUTO 0x00000003
+#define PLDI2CACK __reg32(M32700UT_LAN_BASE + 0x40048)
+#define PLDI2CACK_ACK 0x00000001
+#define PLDI2CFREQ __reg32(M32700UT_LAN_BASE + 0x4004c)
+#define PLDI2CCND __reg32(M32700UT_LAN_BASE + 0x40050)
+#define PLDI2CCND_START 0x00000001
+#define PLDI2CCND_STOP 0x00000002
+#define PLDI2CSTEN __reg32(M32700UT_LAN_BASE + 0x40054)
+#define PLDI2CSTEN_STEN 0x00000001
+#define PLDI2CDATA __reg32(M32700UT_LAN_BASE + 0x40060)
+#define PLDI2CSTS __reg32(M32700UT_LAN_BASE + 0x40064)
+#define PLDI2CSTS_TRX 0x00000020
+#define PLDI2CSTS_BB 0x00000010
+#define PLDI2CSTS_NOACK 0x00000001 /* 0:ack, 1:noack */
+
+#endif /* _M32700UT_M32700UT_LAN_H */
--- /dev/null
+#ifndef _M32700UT_M32700UT_LCD_H
+#define _M32700UT_M32700UT_LCD_H
+
+/*
+ * include/asm-m32r/m32700ut/m32700ut_lcd.h
+ *
+ * M32700UT-LCD board
+ *
+ * Copyright (c) 2002 Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define M32700UT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define M32700UT_LCD_BASE (0x10000000 + NONCACHE_OFFSET)
+#endif /* __ASSEMBLY__ */
+
+/*
+ * ICU
+ */
+#define M32700UT_LCD_IRQ_BAT_INT (M32700UT_LCD_PLD_IRQ_BASE + 1)
+#define M32700UT_LCD_IRQ_USB_INT1 (M32700UT_LCD_PLD_IRQ_BASE + 2)
+#define M32700UT_LCD_IRQ_AUDT0 (M32700UT_LCD_PLD_IRQ_BASE + 3)
+#define M32700UT_LCD_IRQ_AUDT2 (M32700UT_LCD_PLD_IRQ_BASE + 4)
+#define M32700UT_LCD_IRQ_BATSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 16)
+#define M32700UT_LCD_IRQ_BATSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 17)
+#define M32700UT_LCD_IRQ_ASNDSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 18)
+#define M32700UT_LCD_IRQ_ASNDSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 19)
+#define M32700UT_LCD_IRQ_ACNLSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 21)
+
+#define M32700UT_LCD_ICUISTS __reg16(M32700UT_LCD_BASE + 0x300002)
+#define M32700UT_LCD_ICUISTS_VECB_MASK (0xf000)
+#define M32700UT_LCD_VECB(x) ((x) & M32700UT_LCD_ICUISTS_VECB_MASK)
+#define M32700UT_LCD_ICUISTS_ISN_MASK (0x07c0)
+#define M32700UT_LCD_ICUISTS_ISN(x) ((x) & M32700UT_LCD_ICUISTS_ISN_MASK)
+#define M32700UT_LCD_ICUIREQ0 __reg16(M32700UT_LCD_BASE + 0x300004)
+#define M32700UT_LCD_ICUIREQ1 __reg16(M32700UT_LCD_BASE + 0x300006)
+#define M32700UT_LCD_ICUCR1 __reg16(M32700UT_LCD_BASE + 0x300020)
+#define M32700UT_LCD_ICUCR2 __reg16(M32700UT_LCD_BASE + 0x300022)
+#define M32700UT_LCD_ICUCR3 __reg16(M32700UT_LCD_BASE + 0x300024)
+#define M32700UT_LCD_ICUCR4 __reg16(M32700UT_LCD_BASE + 0x300026)
+#define M32700UT_LCD_ICUCR16 __reg16(M32700UT_LCD_BASE + 0x300030)
+#define M32700UT_LCD_ICUCR17 __reg16(M32700UT_LCD_BASE + 0x300032)
+#define M32700UT_LCD_ICUCR18 __reg16(M32700UT_LCD_BASE + 0x300034)
+#define M32700UT_LCD_ICUCR19 __reg16(M32700UT_LCD_BASE + 0x300036)
+#define M32700UT_LCD_ICUCR21 __reg16(M32700UT_LCD_BASE + 0x30003a)
+
+#endif /* _M32700UT_M32700UT_LCD_H */
--- /dev/null
+#ifndef _M32700UT_M32700UT_PLD_H
+#define _M32700UT_M32700UT_PLD_H
+
+/*
+ * include/asm-m32r/m32700ut/m32700ut_pld.h
+ *
+ * Definitions for Programable Logic Device(PLD) on M32700UT board.
+ *
+ * Copyright (c) 2002 Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV)
+#define PLD_PLAT_BASE 0x04c00000
+#else
+#error "no platform configuration"
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
+#define __reg8 (volatile unsigned char *)
+#define __reg16 (volatile unsigned short *)
+#define __reg32 (volatile unsigned int *)
+#else
+#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
+#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008)
+#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
+#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010)
+
+/* MMC */
+#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
+
+/* ICU
+ * ICUISTS: status register
+ * ICUIREQ0: request register
+ * ICUIREQ1: request register
+ * ICUCR3: control register for CFIREQ# interrupt
+ * ICUCR4: control register for CFC Card insert interrupt
+ * ICUCR5: control register for CFC Card eject interrupt
+ * ICUCR6: control register for external interrupt
+ * ICUCR11: control register for MMC Card insert/eject interrupt
+ * ICUCR13: control register for SC error interrupt
+ * ICUCR14: control register for SC receive interrupt
+ * ICUCR15: control register for SC send interrupt
+ * ICUCR16: control register for SIO0 receive interrupt
+ * ICUCR17: control register for SIO0 send interrupt
+ */
+#if !defined(CONFIG_PLAT_USRV)
+#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */
+#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */
+#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */
+#define PLD_IRQ_CFIREQ (M32700UT_PLD_IRQ_BASE + 3) /* CF IREQ */
+#define PLD_IRQ_CFC_INSERT (M32700UT_PLD_IRQ_BASE + 4) /* CF Insert */
+#define PLD_IRQ_CFC_EJECT (M32700UT_PLD_IRQ_BASE + 5) /* CF Eject */
+#define PLD_IRQ_EXINT (M32700UT_PLD_IRQ_BASE + 6) /* EXINT */
+#define PLD_IRQ_INT7 (M32700UT_PLD_IRQ_BASE + 7) /* reserved */
+#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */
+#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */
+#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */
+#define PLD_IRQ_MMCCARD (M32700UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
+#define PLD_IRQ_INT12 (M32700UT_PLD_IRQ_BASE + 12) /* reserved */
+#define PLD_IRQ_SC_ERROR (M32700UT_PLD_IRQ_BASE + 13) /* SC error */
+#define PLD_IRQ_SC_RCV (M32700UT_PLD_IRQ_BASE + 14) /* SC receive */
+#define PLD_IRQ_SC_SND (M32700UT_PLD_IRQ_BASE + 15) /* SC send */
+#define PLD_IRQ_SIO0_RCV (M32700UT_PLD_IRQ_BASE + 16) /* SIO receive */
+#define PLD_IRQ_SIO0_SND (M32700UT_PLD_IRQ_BASE + 17) /* SIO send */
+#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */
+#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */
+#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */
+#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */
+#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */
+#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */
+#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */
+#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */
+#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */
+#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */
+#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */
+#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */
+#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */
+#define PLD_IRQ_INT31 (M32700UT_PLD_IRQ_BASE + 31) /* reserved */
+
+#else /* CONFIG_PLAT_USRV */
+
+#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */
+#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */
+#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */
+#define PLD_IRQ_CF0 (M32700UT_PLD_IRQ_BASE + 3) /* CF0# */
+#define PLD_IRQ_CF1 (M32700UT_PLD_IRQ_BASE + 4) /* CF1# */
+#define PLD_IRQ_CF2 (M32700UT_PLD_IRQ_BASE + 5) /* CF2# */
+#define PLD_IRQ_CF3 (M32700UT_PLD_IRQ_BASE + 6) /* CF3# */
+#define PLD_IRQ_CF4 (M32700UT_PLD_IRQ_BASE + 7) /* CF4# */
+#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */
+#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */
+#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */
+#define PLD_IRQ_INT11 (M32700UT_PLD_IRQ_BASE + 11) /* reserved */
+#define PLD_IRQ_UART0 (M32700UT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */
+#define PLD_IRQ_UART1 (M32700UT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */
+#define PLD_IRQ_INT14 (M32700UT_PLD_IRQ_BASE + 14) /* reserved */
+#define PLD_IRQ_INT15 (M32700UT_PLD_IRQ_BASE + 15) /* reserved */
+#define PLD_IRQ_SNDINT (M32700UT_PLD_IRQ_BASE + 16) /* SNDINT# */
+#define PLD_IRQ_INT17 (M32700UT_PLD_IRQ_BASE + 17) /* reserved */
+#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */
+#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */
+#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */
+#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */
+#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */
+#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */
+#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */
+#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */
+#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */
+#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */
+#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */
+#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */
+#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */
+
+#endif /* CONFIG_PLAT_USRV */
+
+#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
+#define PLD_ICUISTS_VECB_MASK (0xf000)
+#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
+#define PLD_ICUISTS_ISN_MASK (0x07c0)
+#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
+#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004)
+#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006)
+#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100)
+#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102)
+#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
+#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
+#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
+#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
+#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c)
+#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e)
+#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110)
+#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112)
+#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
+#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116)
+#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
+#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
+#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
+#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e)
+#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120)
+#define PLD_ICUCR_IEN (0x1000)
+#define PLD_ICUCR_IREQ (0x0100)
+#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
+#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
+#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
+#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
+#define PLD_ICUCR_ILEVEL0 (0x0000)
+#define PLD_ICUCR_ILEVEL1 (0x0001)
+#define PLD_ICUCR_ILEVEL2 (0x0002)
+#define PLD_ICUCR_ILEVEL3 (0x0003)
+#define PLD_ICUCR_ILEVEL4 (0x0004)
+#define PLD_ICUCR_ILEVEL5 (0x0005)
+#define PLD_ICUCR_ILEVEL6 (0x0006)
+#define PLD_ICUCR_ILEVEL7 (0x0007)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
+#define PLD_CPCR_CF 0x0001
+#define PLD_CPCR_MMC 0x0002
+
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON 0x001
+#define PLD_IOLED_1_OFF 0x000
+#define PLD_IOLED_2_ON 0x002
+#define PLD_IOLED_2_OFF 0x000
+
+/* DIP Switch
+ * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ * 1: -
+ * 2: -
+ * 3: -
+ */
+#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2 0x0200
+#define PLD_IOSWSTS_IOSW1 0x0100
+#define PLD_IOSWSTS_IOWP0 0x0001
+
+/* CRC */
+#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
+
+/* RTC */
+#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
+#define PLD_ESIO0CR_TXEN 0x0001
+#define PLD_ESIO0CR_RXEN 0x0002
+#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
+#define PLD_ESIO0MOD0_CTSS 0x0040
+#define PLD_ESIO0MOD0_RTSS 0x0080
+#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
+#define PLD_ESIO0MOD1_LMFS 0x0010
+#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
+#define PLD_ESIO0STS_TEMP 0x0001
+#define PLD_ESIO0STS_TXCP 0x0002
+#define PLD_ESIO0STS_RXCP 0x0004
+#define PLD_ESIO0STS_TXSC 0x0100
+#define PLD_ESIO0STS_RXSC 0x0200
+#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
+#define PLD_ESIO0INTCR_TXIEN 0x0002
+#define PLD_ESIO0INTCR_RXCEN 0x0004
+#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
+
+#endif /* _M32700UT_M32700UT_PLD.H */
--- /dev/null
+#ifndef _ASM_M32R_M32R_H_
+#define _ASM_M32R_M32R_H_
+
+/*
+ * Renesas M32R processor
+ *
+ * Copyright (C) 2003, 2004 Renesas Technology Corp.
+ */
+
+
+/* Chip type */
+#if defined(CONFIG_CHIP_XNUX_MP) || defined(CONFIG_CHIP_XNUX2_MP)
+#include <asm/m32r_mp_fpga.h>
+#elif defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \
+ || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
+ || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
+#include <asm/m32102.h>
+#endif
+
+/* Platform type */
+#if defined(CONFIG_PLAT_M32700UT)
+#include <asm/m32700ut/m32700ut_pld.h>
+#include <asm/m32700ut/m32700ut_lan.h>
+#include <asm/m32700ut/m32700ut_lcd.h>
+/* for ei_handler:linux/arch/m32r/kernel/entry.S */
+#define M32R_INT1ICU_ISTS PLD_ICUISTS
+#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE
+#define M32R_INT0ICU_ISTS M32700UT_LAN_ICUISTS
+#define M32R_INT0ICU_IRQ_BASE M32700UT_LAN_PLD_IRQ_BASE
+#define M32R_INT2ICU_ISTS M32700UT_LCD_ICUISTS
+#define M32R_INT2ICU_IRQ_BASE M32700UT_LCD_PLD_IRQ_BASE
+#endif /* CONFIG_PLAT_M32700UT */
+
+#if defined(CONFIG_PLAT_OPSPUT)
+#include <asm/opsput/opsput_pld.h>
+#include <asm/opsput/opsput_lan.h>
+#include <asm/opsput/opsput_lcd.h>
+/* for ei_handler:linux/arch/m32r/kernel/entry.S */
+#define M32R_INT1ICU_ISTS PLD_ICUISTS
+#define M32R_INT1ICU_IRQ_BASE OPSPUT_PLD_IRQ_BASE
+#define M32R_INT0ICU_ISTS OPSPUT_LAN_ICUISTS
+#define M32R_INT0ICU_IRQ_BASE OPSPUT_LAN_PLD_IRQ_BASE
+#define M32R_INT2ICU_ISTS OPSPUT_LCD_ICUISTS
+#define M32R_INT2ICU_IRQ_BASE OPSPUT_LCD_PLD_IRQ_BASE
+#endif /* CONFIG_PLAT_OPSPUT */
+
+#if defined(CONFIG_PLAT_MAPPI2)
+#include <asm/mappi2/mappi2_pld.h>
+#endif /* CONFIG_PLAT_MAPPI2 */
+
+#if defined(CONFIG_PLAT_MAPPI3)
+#include <asm/mappi3/mappi3_pld.h>
+#endif /* CONFIG_PLAT_MAPPI3 */
+
+#if defined(CONFIG_PLAT_USRV)
+#include <asm/m32700ut/m32700ut_pld.h>
+/* for ei_handler:linux/arch/m32r/kernel/entry.S */
+#define M32R_INT1ICU_ISTS PLD_ICUISTS
+#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE
+#endif
+
+#if defined(CONFIG_PLAT_M32104UT)
+#include <asm/m32104ut/m32104ut_pld.h>
+/* for ei_handler:linux/arch/m32r/kernel/entry.S */
+#define M32R_INT1ICU_ISTS PLD_ICUISTS
+#define M32R_INT1ICU_IRQ_BASE M32104UT_PLD_IRQ_BASE
+#endif /* CONFIG_PLAT_M32104 */
+
+/*
+ * M32R Register
+ */
+
+/*
+ * MMU Register
+ */
+
+#define MMU_REG_BASE (0xffff0000)
+#define ITLB_BASE (0xfe000000)
+#define DTLB_BASE (0xfe000800)
+
+#define NR_TLB_ENTRIES CONFIG_TLB_ENTRIES
+
+#define MATM MMU_REG_BASE /* MMU Address Translation Mode
+ Register */
+#define MPSZ (0x04 + MMU_REG_BASE) /* MMU Page Size Designation Register */
+#define MASID (0x08 + MMU_REG_BASE) /* MMU Address Space ID Register */
+#define MESTS (0x0c + MMU_REG_BASE) /* MMU Exception Status Register */
+#define MDEVA (0x10 + MMU_REG_BASE) /* MMU Operand Exception Virtual
+ Address Register */
+#define MDEVP (0x14 + MMU_REG_BASE) /* MMU Operand Exception Virtual Page
+ Number Register */
+#define MPTB (0x18 + MMU_REG_BASE) /* MMU Page Table Base Register */
+#define MSVA (0x20 + MMU_REG_BASE) /* MMU Search Virtual Address
+ Register */
+#define MTOP (0x24 + MMU_REG_BASE) /* MMU TLB Operation Register */
+#define MIDXI (0x28 + MMU_REG_BASE) /* MMU Index Register for
+ Instruciton */
+#define MIDXD (0x2c + MMU_REG_BASE) /* MMU Index Register for Operand */
+
+#define MATM_offset (MATM - MMU_REG_BASE)
+#define MPSZ_offset (MPSZ - MMU_REG_BASE)
+#define MASID_offset (MASID - MMU_REG_BASE)
+#define MESTS_offset (MESTS - MMU_REG_BASE)
+#define MDEVA_offset (MDEVA - MMU_REG_BASE)
+#define MDEVP_offset (MDEVP - MMU_REG_BASE)
+#define MPTB_offset (MPTB - MMU_REG_BASE)
+#define MSVA_offset (MSVA - MMU_REG_BASE)
+#define MTOP_offset (MTOP - MMU_REG_BASE)
+#define MIDXI_offset (MIDXI - MMU_REG_BASE)
+#define MIDXD_offset (MIDXD - MMU_REG_BASE)
+
+#define MESTS_IT (1 << 0) /* Instruction TLB miss */
+#define MESTS_IA (1 << 1) /* Instruction Access Exception */
+#define MESTS_DT (1 << 4) /* Operand TLB miss */
+#define MESTS_DA (1 << 5) /* Operand Access Exception */
+#define MESTS_DRW (1 << 6) /* Operand Write Exception Flag */
+
+/*
+ * PSW (Processor Status Word)
+ */
+
+/* PSW bit */
+#define M32R_PSW_BIT_SM (7) /* Stack Mode */
+#define M32R_PSW_BIT_IE (6) /* Interrupt Enable */
+#define M32R_PSW_BIT_PM (3) /* Processor Mode [0:Supervisor,1:User] */
+#define M32R_PSW_BIT_C (0) /* Condition */
+#define M32R_PSW_BIT_BSM (7+8) /* Backup Stack Mode */
+#define M32R_PSW_BIT_BIE (6+8) /* Backup Interrupt Enable */
+#define M32R_PSW_BIT_BPM (3+8) /* Backup Processor Mode */
+#define M32R_PSW_BIT_BC (0+8) /* Backup Condition */
+
+/* PSW bit map */
+#define M32R_PSW_SM (1UL<< M32R_PSW_BIT_SM) /* Stack Mode */
+#define M32R_PSW_IE (1UL<< M32R_PSW_BIT_IE) /* Interrupt Enable */
+#define M32R_PSW_PM (1UL<< M32R_PSW_BIT_PM) /* Processor Mode */
+#define M32R_PSW_C (1UL<< M32R_PSW_BIT_C) /* Condition */
+#define M32R_PSW_BSM (1UL<< M32R_PSW_BIT_BSM) /* Backup Stack Mode */
+#define M32R_PSW_BIE (1UL<< M32R_PSW_BIT_BIE) /* Backup Interrupt Enable */
+#define M32R_PSW_BPM (1UL<< M32R_PSW_BIT_BPM) /* Backup Processor Mode */
+#define M32R_PSW_BC (1UL<< M32R_PSW_BIT_BC) /* Backup Condition */
+
+/*
+ * Direct address to SFR
+ */
+
+#include <asm/page.h>
+#ifdef CONFIG_MMU
+#define NONCACHE_OFFSET (__PAGE_OFFSET + 0x20000000)
+#else
+#define NONCACHE_OFFSET __PAGE_OFFSET
+#endif /* CONFIG_MMU */
+
+#define M32R_ICU_ISTS_ADDR M32R_ICU_ISTS_PORTL+NONCACHE_OFFSET
+#define M32R_ICU_IPICR_ADDR M32R_ICU_IPICR0_PORTL+NONCACHE_OFFSET
+#define M32R_ICU_IMASK_ADDR M32R_ICU_IMASK_PORTL+NONCACHE_OFFSET
+#define M32R_FPGA_CPU_NAME_ADDR M32R_FPGA_CPU_NAME0_PORTL+NONCACHE_OFFSET
+#define M32R_FPGA_MODEL_ID_ADDR M32R_FPGA_MODEL_ID0_PORTL+NONCACHE_OFFSET
+#define M32R_FPGA_VERSION_ADDR M32R_FPGA_VERSION0_PORTL+NONCACHE_OFFSET
+
+#endif /* _ASM_M32R_M32R_H_ */
--- /dev/null
+#ifndef _ASM_M32R_M32R_MP_FPGA_
+#define _ASM_M32R_M32R_MP_FPGA_
+
+/*
+ * Renesas M32R-MP-FPGA
+ *
+ * Copyright (c) 2002 Hitoshi Yamamoto
+ * Copyright (c) 2003, 2004 Renesas Technology Corp.
+ */
+
+/*
+ * ========================================================
+ * M32R-MP-FPGA Memory Map
+ * ========================================================
+ * 0x00000000 : Block#0 : 64[MB]
+ * 0x03E00000 : SFR
+ * 0x03E00000 : reserved
+ * 0x03EF0000 : FPGA
+ * 0x03EF1000 : reserved
+ * 0x03EF4000 : CKM
+ * 0x03EF4000 : BSELC
+ * 0x03EF5000 : reserved
+ * 0x03EFC000 : MFT
+ * 0x03EFD000 : SIO
+ * 0x03EFE000 : reserved
+ * 0x03EFF000 : ICU
+ * 0x03F00000 : Internal SRAM 64[KB]
+ * 0x03F10000 : reserved
+ * --------------------------------------------------------
+ * 0x04000000 : Block#1 : 64[MB]
+ * 0x04000000 : Debug board SRAM 4[MB]
+ * 0x04400000 : reserved
+ * --------------------------------------------------------
+ * 0x08000000 : Block#2 : 64[MB]
+ * --------------------------------------------------------
+ * 0x0C000000 : Block#3 : 64[MB]
+ * --------------------------------------------------------
+ * 0x10000000 : Block#4 : 64[MB]
+ * --------------------------------------------------------
+ * 0x14000000 : Block#5 : 64[MB]
+ * --------------------------------------------------------
+ * 0x18000000 : Block#6 : 64[MB]
+ * --------------------------------------------------------
+ * 0x1C000000 : Block#7 : 64[MB]
+ * --------------------------------------------------------
+ * 0xFE000000 : TLB
+ * 0xFE000000 : ITLB
+ * 0xFE000080 : reserved
+ * 0xFE000800 : DTLB
+ * 0xFE000880 : reserved
+ * --------------------------------------------------------
+ * 0xFF000000 : System area
+ * 0xFFFF0000 : MMU
+ * 0xFFFF0030 : reserved
+ * 0xFFFF8000 : Debug function
+ * 0xFFFFA000 : reserved
+ * 0xFFFFC000 : CPU control
+ * 0xFFFFFFFF
+ * ========================================================
+ */
+
+/*======================================================================*
+ * Special Function Register
+ *======================================================================*/
+#define M32R_SFR_OFFSET (0x00E00000) /* 0x03E00000-0x03EFFFFF 1[MB] */
+
+/*
+ * FPGA registers.
+ */
+#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET)
+
+#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP)
+#define M32R_FPGA_CPU_NAME3_PORTL (0x1C+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP)
+#define M32R_FPGA_MODEL_ID3_PORTL (0x2C+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP)
+#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP)
+
+/*
+ * Clock and Power Manager registers.
+ */
+#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET)
+
+#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET)
+#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET)
+#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET)
+
+/*
+ * Block SELect Controller registers.
+ */
+#define M32R_BSELC_OFFSET (0x000F5000+M32R_SFR_OFFSET)
+
+#define M32R_BSEL0_CR0_PORTL (0x000+M32R_BSELC_OFFSET)
+#define M32R_BSEL0_CR1_PORTL (0x004+M32R_BSELC_OFFSET)
+#define M32R_BSEL1_CR0_PORTL (0x100+M32R_BSELC_OFFSET)
+#define M32R_BSEL1_CR1_PORTL (0x104+M32R_BSELC_OFFSET)
+#define M32R_BSEL2_CR0_PORTL (0x200+M32R_BSELC_OFFSET)
+#define M32R_BSEL2_CR1_PORTL (0x204+M32R_BSELC_OFFSET)
+#define M32R_BSEL3_CR0_PORTL (0x300+M32R_BSELC_OFFSET)
+#define M32R_BSEL3_CR1_PORTL (0x304+M32R_BSELC_OFFSET)
+#define M32R_BSEL4_CR0_PORTL (0x400+M32R_BSELC_OFFSET)
+#define M32R_BSEL4_CR1_PORTL (0x404+M32R_BSELC_OFFSET)
+#define M32R_BSEL5_CR0_PORTL (0x500+M32R_BSELC_OFFSET)
+#define M32R_BSEL5_CR1_PORTL (0x504+M32R_BSELC_OFFSET)
+#define M32R_BSEL6_CR0_PORTL (0x600+M32R_BSELC_OFFSET)
+#define M32R_BSEL6_CR1_PORTL (0x604+M32R_BSELC_OFFSET)
+#define M32R_BSEL7_CR0_PORTL (0x700+M32R_BSELC_OFFSET)
+#define M32R_BSEL7_CR1_PORTL (0x704+M32R_BSELC_OFFSET)
+
+/*
+ * Multi Function Timer registers.
+ */
+#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET)
+
+#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */
+#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */
+
+#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET)
+#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */
+#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */
+#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */
+#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */
+#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */
+
+#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET)
+#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */
+#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */
+#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */
+#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */
+#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */
+
+#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET)
+#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */
+#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */
+#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */
+#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */
+#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */
+
+#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET)
+#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */
+#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */
+#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */
+#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */
+#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */
+
+#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET)
+#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */
+#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */
+#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */
+#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */
+#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */
+
+#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET)
+#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */
+#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */
+#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */
+#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */
+#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */
+
+#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */
+#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */
+#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */
+#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */
+#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */
+#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */
+#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */
+#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */
+#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */
+#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */
+#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */
+#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */
+
+#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */
+#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */
+#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */
+#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */
+#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */
+#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */
+#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */
+#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */
+#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */
+#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */
+#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */
+#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */
+#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */
+#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */
+#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */
+
+/*
+ * Serial I/O registers.
+ */
+#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET)
+
+#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET)
+#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET)
+#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET)
+#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET)
+#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET)
+#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET)
+#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET)
+#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET)
+
+/*
+ * Interrupt Control Unit registers.
+ */
+#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET)
+
+#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET)
+#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET)
+#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET)
+#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET)
+#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */
+#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */
+#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */
+#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */
+#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */
+#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */
+#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */
+#define M32R_ICU_CR8_PORTL (0x218+M32R_ICU_OFFSET) /* INT7 */
+#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* SIO0 RX */
+#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* SIO0 TX */
+#define M32R_ICU_CR40_PORTL (0x29C+M32R_ICU_OFFSET) /* DMAC0 */
+#define M32R_ICU_CR41_PORTL (0x2A0+M32R_ICU_OFFSET) /* DMAC1 */
+#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* MFT0 */
+#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* MFT1 */
+#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* MFT2 */
+#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* MFT3 */
+#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* MFT4 */
+#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* MFT5 */
+#define M32R_ICU_IPICR0_PORTL (0x2DC+M32R_ICU_OFFSET) /* IPI0 */
+#define M32R_ICU_IPICR1_PORTL (0x2E0+M32R_ICU_OFFSET) /* IPI1 */
+#define M32R_ICU_IPICR2_PORTL (0x2E4+M32R_ICU_OFFSET) /* IPI2 */
+#define M32R_ICU_IPICR3_PORTL (0x2E8+M32R_ICU_OFFSET) /* IPI3 */
+#define M32R_ICU_IPICR4_PORTL (0x2EC+M32R_ICU_OFFSET) /* IPI4 */
+#define M32R_ICU_IPICR5_PORTL (0x2F0+M32R_ICU_OFFSET) /* IPI5 */
+#define M32R_ICU_IPICR6_PORTL (0x2F4+M32R_ICU_OFFSET) /* IPI6 */
+#define M32R_ICU_IPICR7_PORTL (0x2FC+M32R_ICU_OFFSET) /* IPI7 */
+
+#define M32R_ICUISTS_VECB(val) ((val>>28) & 0xF)
+#define M32R_ICUISTS_ISN(val) ((val>>22) & 0x3F)
+#define M32R_ICUISTS_PIML(val) ((val>>16) & 0x7)
+
+#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */
+#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */
+#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */
+#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */
+#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */
+#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */
+#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */
+#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */
+
+#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */
+#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */
+#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */
+#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */
+#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/
+#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */
+#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */
+#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */
+#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */
+#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */
+#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */
+#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */
+#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */
+#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */
+#define M32R_ICUCR_ILEVEL_MASK (7UL)
+
+#define M32R_IRQ_INT0 (1) /* INT0 */
+#define M32R_IRQ_INT1 (2) /* INT1 */
+#define M32R_IRQ_INT2 (3) /* INT2 */
+#define M32R_IRQ_INT3 (4) /* INT3 */
+#define M32R_IRQ_INT4 (5) /* INT4 */
+#define M32R_IRQ_INT5 (6) /* INT5 */
+#define M32R_IRQ_INT6 (7) /* INT6 */
+#define M32R_IRQ_INT7 (8) /* INT7 */
+#define M32R_IRQ_MFT0 (16) /* MFT0 */
+#define M32R_IRQ_MFT1 (17) /* MFT1 */
+#define M32R_IRQ_MFT2 (18) /* MFT2 */
+#define M32R_IRQ_MFT3 (19) /* MFT3 */
+#define M32R_IRQ_MFT4 (20) /* MFT4 */
+#define M32R_IRQ_MFT5 (21) /* MFT5 */
+#define M32R_IRQ_DMAC0 (32) /* DMAC0 */
+#define M32R_IRQ_DMAC1 (33) /* DMAC1 */
+#define M32R_IRQ_SIO0_R (48) /* SIO0 receive */
+#define M32R_IRQ_SIO0_S (49) /* SIO0 send */
+#define M32R_IRQ_SIO1_R (50) /* SIO1 send */
+#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */
+#define M32R_IRQ_IPI0 (56) /* IPI0 */
+#define M32R_IRQ_IPI1 (57) /* IPI1 */
+#define M32R_IRQ_IPI2 (58) /* IPI2 */
+#define M32R_IRQ_IPI3 (59) /* IPI3 */
+#define M32R_IRQ_IPI4 (60) /* IPI4 */
+#define M32R_IRQ_IPI5 (61) /* IPI5 */
+#define M32R_IRQ_IPI6 (62) /* IPI6 */
+#define M32R_IRQ_IPI7 (63) /* IPI7 */
+
+/*======================================================================*
+ * CPU
+ *======================================================================*/
+
+#define M32R_CPUID_PORTL (0xFFFFFFE0)
+#define M32R_MCICAR_PORTL (0xFFFFFFF0)
+#define M32R_MCDCAR_PORTL (0xFFFFFFF4)
+#define M32R_MCCR_PORTL (0xFFFFFFFC)
+
+#endif /* _ASM_M32R_M32R_MP_FPGA_ */
--- /dev/null
+#ifndef _MAPPI2_PLD_H
+#define _MAPPI2_PLD_H
+
+/*
+ * include/asm-m32r/mappi2/mappi2_pld.h
+ *
+ * Definitions for Extended IO Logic on MAPPI2 board.
+ * based on m32700ut_pld.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef __ASSEMBLY__
+/* FIXME:
+ * Some C functions use non-cache address, so can't define non-cache address.
+ */
+#define PLD_BASE (0x10c00000 /* + NONCACHE_OFFSET */)
+#define __reg8 (volatile unsigned char *)
+#define __reg16 (volatile unsigned short *)
+#define __reg32 (volatile unsigned int *)
+#else
+#define PLD_BASE (0x10c00000 + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
+#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
+
+/* MMC */
+#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
+
+
+/*==== ICU ====*/
+#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
+#define M32R_IRQ_I2C (28) /* I2C-BUS */
+#if 1
+#define PLD_IRQ_CFIREQ (40) /* CFC Card Interrupt */
+#define PLD_IRQ_CFC_INSERT (41) /* CFC Card Insert */
+#define PLD_IRQ_CFC_EJECT (42) /* CFC Card Eject */
+#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
+#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
+#else
+#define PLD_IRQ_CFIREQ (34) /* CFC Card Interrupt */
+#define PLD_IRQ_CFC_INSERT (35) /* CFC Card Insert */
+#define PLD_IRQ_CFC_EJECT (36) /* CFC Card Eject */
+#define PLD_IRQ_MMCCARD (37) /* MMC Card Insert */
+#define PLD_IRQ_MMCIRQ (38) /* MMC Transfer Done */
+#endif
+
+
+#if 0
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON 0x001
+#define PLD_IOLED_1_OFF 0x000
+#define PLD_IOLED_2_ON 0x002
+#define PLD_IOLED_2_OFF 0x000
+
+/* DIP Switch
+ * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ * 1: -
+ * 2: -
+ * 3: -
+ */
+#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2 0x0200
+#define PLD_IOSWSTS_IOSW1 0x0100
+#define PLD_IOSWSTS_IOWP0 0x0001
+
+#endif
+
+/* CRC */
+#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
+
+
+#if 0
+/* RTC */
+#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
+#define PLD_ESIO0CR_TXEN 0x0001
+#define PLD_ESIO0CR_RXEN 0x0002
+#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
+#define PLD_ESIO0MOD0_CTSS 0x0040
+#define PLD_ESIO0MOD0_RTSS 0x0080
+#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
+#define PLD_ESIO0MOD1_LMFS 0x0010
+#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
+#define PLD_ESIO0STS_TEMP 0x0001
+#define PLD_ESIO0STS_TXCP 0x0002
+#define PLD_ESIO0STS_RXCP 0x0004
+#define PLD_ESIO0STS_TXSC 0x0100
+#define PLD_ESIO0STS_RXSC 0x0200
+#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
+#define PLD_ESIO0INTCR_TXIEN 0x0002
+#define PLD_ESIO0INTCR_RXCEN 0x0004
+#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
+
+#endif
+
+#endif /* _MAPPI2_PLD.H */
--- /dev/null
+#ifndef _MAPPI3_PLD_H
+#define _MAPPI3_PLD_H
+
+/*
+ * include/asm-m32r/mappi3/mappi3_pld.h
+ *
+ * Definitions for Extended IO Logic on MAPPI3 board.
+ * based on m32700ut_pld.h
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef __ASSEMBLY__
+/* FIXME:
+ * Some C functions use non-cache address, so can't define non-cache address.
+ */
+#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */)
+#define __reg8 (volatile unsigned char *)
+#define __reg16 (volatile unsigned short *)
+#define __reg32 (volatile unsigned int *)
+#else
+#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
+#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
+
+/* MMC */
+#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
+
+/* ICU */
+#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
+#define M32R_IRQ_I2C (28) /* I2C-BUS */
+#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
+#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */
+#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */
+#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
+#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
+
+#if 0
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON 0x001
+#define PLD_IOLED_1_OFF 0x000
+#define PLD_IOLED_2_ON 0x002
+#define PLD_IOLED_2_OFF 0x000
+
+/* DIP Switch
+ * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ * 1: -
+ * 2: -
+ * 3: -
+ */
+#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2 0x0200
+#define PLD_IOSWSTS_IOSW1 0x0100
+#define PLD_IOSWSTS_IOWP0 0x0001
+
+#endif
+
+/* CRC */
+#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
+
+#if 0
+/* RTC */
+#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
+#define PLD_ESIO0CR_TXEN 0x0001
+#define PLD_ESIO0CR_RXEN 0x0002
+#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
+#define PLD_ESIO0MOD0_CTSS 0x0040
+#define PLD_ESIO0MOD0_RTSS 0x0080
+#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
+#define PLD_ESIO0MOD1_LMFS 0x0010
+#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
+#define PLD_ESIO0STS_TEMP 0x0001
+#define PLD_ESIO0STS_TXCP 0x0002
+#define PLD_ESIO0STS_RXCP 0x0004
+#define PLD_ESIO0STS_TXSC 0x0100
+#define PLD_ESIO0STS_RXSC 0x0200
+#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
+#define PLD_ESIO0INTCR_TXIEN 0x0002
+#define PLD_ESIO0INTCR_RXCEN 0x0004
+#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
+
+#endif
+
+/* Reset Control */
+#define PLD_REBOOT __reg16(PLD_BASE + 0x38000)
+
+#endif /* _MAPPI3_PLD.H */
--- /dev/null
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x) ((x))
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* _ASM_MC146818RTC_H */
--- /dev/null
+#ifndef __M32R_MMAN_H__
+#define __M32R_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* __M32R_MMAN_H__ */
--- /dev/null
+#ifndef _ASM_M32R_MMU_H
+#define _ASM_M32R_MMU_H
+
+#if !defined(CONFIG_MMU)
+
+typedef struct {
+ unsigned long end_brk;
+} mm_context_t;
+
+#else /* CONFIG_MMU */
+
+/* Default "unsigned long" context */
+#ifndef CONFIG_SMP
+typedef unsigned long mm_context_t;
+#else
+typedef unsigned long mm_context_t[NR_CPUS];
+#endif
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASM_M32R_MMU_H */
--- /dev/null
+#ifndef _ASM_M32R_MMU_CONTEXT_H
+#define _ASM_M32R_MMU_CONTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/m32r.h>
+
+#define MMU_CONTEXT_ASID_MASK (0x000000FF)
+#define MMU_CONTEXT_VERSION_MASK (0xFFFFFF00)
+#define MMU_CONTEXT_FIRST_VERSION (0x00000100)
+#define NO_CONTEXT (0x00000000)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * Cache of MMU context last used.
+ */
+#ifndef CONFIG_SMP
+extern unsigned long mmu_context_cache_dat;
+#define mmu_context_cache mmu_context_cache_dat
+#define mm_context(mm) mm->context
+#else /* not CONFIG_SMP */
+extern unsigned long mmu_context_cache_dat[];
+#define mmu_context_cache mmu_context_cache_dat[smp_processor_id()]
+#define mm_context(mm) mm->context[smp_processor_id()]
+#endif /* not CONFIG_SMP */
+
+#define set_tlb_tag(entry, tag) (*entry = (tag & PAGE_MASK)|get_asid())
+#define set_tlb_data(entry, data) (*entry = (data | _PAGE_PRESENT))
+
+#ifdef CONFIG_MMU
+#define enter_lazy_tlb(mm, tsk) do { } while (0)
+
+static inline void get_new_mmu_context(struct mm_struct *mm)
+{
+ unsigned long mc = ++mmu_context_cache;
+
+ if (!(mc & MMU_CONTEXT_ASID_MASK)) {
+ /* We exhaust ASID of this version.
+ Flush all TLB and start new cycle. */
+ local_flush_tlb_all();
+ /* Fix version if needed.
+ Note that we avoid version #0 to distingush NO_CONTEXT. */
+ if (!mc)
+ mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
+ }
+ mm_context(mm) = mc;
+}
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+ if (mm) {
+ unsigned long mc = mmu_context_cache;
+
+ /* Check if we have old version of context.
+ If it's old, we need to get new context with new version. */
+ if ((mm_context(mm) ^ mc) & MMU_CONTEXT_VERSION_MASK)
+ get_new_mmu_context(mm);
+ }
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+#ifndef CONFIG_SMP
+ mm->context = NO_CONTEXT;
+#else /* CONFIG_SMP */
+ int num_cpus = num_online_cpus();
+ int i;
+
+ for (i = 0 ; i < num_cpus ; i++)
+ mm->context[i] = NO_CONTEXT;
+#endif /* CONFIG_SMP */
+
+ return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+#define destroy_context(mm) do { } while (0)
+
+static inline void set_asid(unsigned long asid)
+{
+ *(volatile unsigned long *)MASID = (asid & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline unsigned long get_asid(void)
+{
+ unsigned long asid;
+
+ asid = *(volatile long *)MASID;
+ asid &= MMU_CONTEXT_ASID_MASK;
+
+ return asid;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm)
+{
+ get_mmu_context(mm);
+ set_asid(mm_context(mm) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+ struct mm_struct *next, struct task_struct *tsk)
+{
+#ifdef CONFIG_SMP
+ int cpu = smp_processor_id();
+#endif /* CONFIG_SMP */
+
+ if (prev != next) {
+#ifdef CONFIG_SMP
+ cpu_set(cpu, next->cpu_vm_mask);
+#endif /* CONFIG_SMP */
+ /* Set MPTB = next->pgd */
+ *(volatile unsigned long *)MPTB = (unsigned long)next->pgd;
+ activate_context(next);
+ }
+#ifdef CONFIG_SMP
+ else
+ if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+ activate_context(next);
+#endif /* CONFIG_SMP */
+}
+
+#define deactivate_mm(tsk, mm) do { } while (0)
+
+#define activate_mm(prev, next) \
+ switch_mm((prev), (next), NULL)
+
+#else /* not CONFIG_MMU */
+#define get_mmu_context(mm) do { } while (0)
+#define init_new_context(tsk,mm) (0)
+#define destroy_context(mm) do { } while (0)
+#define set_asid(asid) do { } while (0)
+#define get_asid() (0)
+#define activate_context(mm) do { } while (0)
+#define switch_mm(prev,next,tsk) do { } while (0)
+#define deactivate_mm(mm,tsk) do { } while (0)
+#define activate_mm(prev,next) do { } while (0)
+#define enter_lazy_tlb(mm,tsk) do { } while (0)
+#endif /* not CONFIG_MMU */
+
+#endif /* not __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M32R_MMU_CONTEXT_H */
--- /dev/null
+/*
+ * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
+ *
+ */
+
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+
+#include <asm/smp.h>
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid) (node_data[nid])
+
+#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn)
+#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid) \
+({ \
+ pg_data_t *__pgdat = NODE_DATA(nid); \
+ __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \
+})
+
+#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
+/*
+ * pfn_valid should be made as fast as possible, and the current definition
+ * is valid for machines that are NUMA, but still contiguous, which is what
+ * is currently supported. A more generalised, but slower definition would
+ * be something like this - mbligh:
+ * ( pfn_to_pgdat(pfn) && ((pfn) < node_end_pfn(pfn_to_nid(pfn))) )
+ */
+#if 1 /* M32R_FIXME */
+#define pfn_valid(pfn) (1)
+#else
+#define pfn_valid(pfn) ((pfn) < num_physpages)
+#endif
+
+/*
+ * generic node memory support, the following assumptions apply:
+ */
+
+static __inline__ int pfn_to_nid(unsigned long pfn)
+{
+ int node;
+
+ for (node = 0 ; node < MAX_NUMNODES ; node++)
+ if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node))
+ break;
+
+ return node;
+}
+
+static __inline__ struct pglist_data *pfn_to_pgdat(unsigned long pfn)
+{
+ return(NODE_DATA(pfn_to_nid(pfn)));
+}
+
+#endif /* CONFIG_DISCONTIGMEM */
+#endif /* _ASM_MMZONE_H_ */
--- /dev/null
+#ifndef _ASM_M32R_MODULE_H
+#define _ASM_M32R_MODULE_H
+
+struct mod_arch_specific { };
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif /* _ASM_M32R_MODULE_H */
--- /dev/null
+#ifndef _ASM_M32R_MSGBUF_H
+#define _ASM_M32R_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for m32r architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_M32R_MSGBUF_H */
--- /dev/null
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
--- /dev/null
+#ifndef _OPSPUT_OPSPUT_LAN_H
+#define _OPSPUT_OPSPUT_LAN_H
+
+/*
+ * include/asm-m32r/opsput/opsput_lan.h
+ *
+ * OPSPUT-LAN board
+ *
+ * Copyright (c) 2002-2004 Takeo Takahashi, Mamoru Sakugawa
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define OPSPUT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define OPSPUT_LAN_BASE (0x10000000 + NONCACHE_OFFSET)
+#endif /* __ASSEMBLY__ */
+
+/* ICU
+ * ICUISTS: status register
+ * ICUIREQ0: request register
+ * ICUIREQ1: request register
+ * ICUCR3: control register for CFIREQ# interrupt
+ * ICUCR4: control register for CFC Card insert interrupt
+ * ICUCR5: control register for CFC Card eject interrupt
+ * ICUCR6: control register for external interrupt
+ * ICUCR11: control register for MMC Card insert/eject interrupt
+ * ICUCR13: control register for SC error interrupt
+ * ICUCR14: control register for SC receive interrupt
+ * ICUCR15: control register for SC send interrupt
+ * ICUCR16: control register for SIO0 receive interrupt
+ * ICUCR17: control register for SIO0 send interrupt
+ */
+#define OPSPUT_LAN_IRQ_LAN (OPSPUT_LAN_PLD_IRQ_BASE + 1) /* LAN */
+#define OPSPUT_LAN_IRQ_I2C (OPSPUT_LAN_PLD_IRQ_BASE + 3) /* I2C */
+
+#define OPSPUT_LAN_ICUISTS __reg16(OPSPUT_LAN_BASE + 0xc0002)
+#define OPSPUT_LAN_ICUISTS_VECB_MASK (0xf000)
+#define OPSPUT_LAN_VECB(x) ((x) & OPSPUT_LAN_ICUISTS_VECB_MASK)
+#define OPSPUT_LAN_ICUISTS_ISN_MASK (0x07c0)
+#define OPSPUT_LAN_ICUISTS_ISN(x) ((x) & OPSPUT_LAN_ICUISTS_ISN_MASK)
+#define OPSPUT_LAN_ICUIREQ0 __reg16(OPSPUT_LAN_BASE + 0xc0004)
+#define OPSPUT_LAN_ICUCR1 __reg16(OPSPUT_LAN_BASE + 0xc0010)
+#define OPSPUT_LAN_ICUCR3 __reg16(OPSPUT_LAN_BASE + 0xc0014)
+
+#endif /* _OPSPUT_OPSPUT_LAN_H */
--- /dev/null
+#ifndef _OPSPUT_OPSPUT_LCD_H
+#define _OPSPUT_OPSPUT_LCD_H
+
+/*
+ * include/asm-m32r/opsput/opsput_lcd.h
+ *
+ * OPSPUT-LCD board
+ *
+ * Copyright (c) 2002 Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define OPSPUT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */)
+#else
+#define OPSPUT_LCD_BASE (0x10000000 + NONCACHE_OFFSET)
+#endif /* __ASSEMBLY__ */
+
+/*
+ * ICU
+ */
+#define OPSPUT_LCD_IRQ_BAT_INT (OPSPUT_LCD_PLD_IRQ_BASE + 1)
+#define OPSPUT_LCD_IRQ_USB_INT1 (OPSPUT_LCD_PLD_IRQ_BASE + 2)
+#define OPSPUT_LCD_IRQ_AUDT0 (OPSPUT_LCD_PLD_IRQ_BASE + 3)
+#define OPSPUT_LCD_IRQ_AUDT2 (OPSPUT_LCD_PLD_IRQ_BASE + 4)
+#define OPSPUT_LCD_IRQ_BATSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 16)
+#define OPSPUT_LCD_IRQ_BATSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 17)
+#define OPSPUT_LCD_IRQ_ASNDSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 18)
+#define OPSPUT_LCD_IRQ_ASNDSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 19)
+#define OPSPUT_LCD_IRQ_ACNLSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 21)
+
+#define OPSPUT_LCD_ICUISTS __reg16(OPSPUT_LCD_BASE + 0x300002)
+#define OPSPUT_LCD_ICUISTS_VECB_MASK (0xf000)
+#define OPSPUT_LCD_VECB(x) ((x) & OPSPUT_LCD_ICUISTS_VECB_MASK)
+#define OPSPUT_LCD_ICUISTS_ISN_MASK (0x07c0)
+#define OPSPUT_LCD_ICUISTS_ISN(x) ((x) & OPSPUT_LCD_ICUISTS_ISN_MASK)
+#define OPSPUT_LCD_ICUIREQ0 __reg16(OPSPUT_LCD_BASE + 0x300004)
+#define OPSPUT_LCD_ICUIREQ1 __reg16(OPSPUT_LCD_BASE + 0x300006)
+#define OPSPUT_LCD_ICUCR1 __reg16(OPSPUT_LCD_BASE + 0x300020)
+#define OPSPUT_LCD_ICUCR2 __reg16(OPSPUT_LCD_BASE + 0x300022)
+#define OPSPUT_LCD_ICUCR3 __reg16(OPSPUT_LCD_BASE + 0x300024)
+#define OPSPUT_LCD_ICUCR4 __reg16(OPSPUT_LCD_BASE + 0x300026)
+#define OPSPUT_LCD_ICUCR16 __reg16(OPSPUT_LCD_BASE + 0x300030)
+#define OPSPUT_LCD_ICUCR17 __reg16(OPSPUT_LCD_BASE + 0x300032)
+#define OPSPUT_LCD_ICUCR18 __reg16(OPSPUT_LCD_BASE + 0x300034)
+#define OPSPUT_LCD_ICUCR19 __reg16(OPSPUT_LCD_BASE + 0x300036)
+#define OPSPUT_LCD_ICUCR21 __reg16(OPSPUT_LCD_BASE + 0x30003a)
+
+#endif /* _OPSPUT_OPSPUT_LCD_H */
--- /dev/null
+#ifndef _OPSPUT_OPSPUT_PLD_H
+#define _OPSPUT_OPSPUT_PLD_H
+
+/*
+ * include/asm-m32r/opsput/opsput_pld.h
+ *
+ * Definitions for Programable Logic Device(PLD) on OPSPUT board.
+ *
+ * Copyright (c) 2002 Takeo Takahashi
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of
+ * this archive for more details.
+ */
+
+#define PLD_PLAT_BASE 0x1cc00000
+
+#ifndef __ASSEMBLY__
+/*
+ * C functions use non-cache address.
+ */
+#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
+#define __reg8 (volatile unsigned char *)
+#define __reg16 (volatile unsigned short *)
+#define __reg32 (volatile unsigned int *)
+#else
+#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
+#define __reg8
+#define __reg16
+#define __reg32
+#endif /* __ASSEMBLY__ */
+
+/* CFC */
+#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
+#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
+#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
+#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
+#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008)
+#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
+#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
+#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010)
+
+/* MMC */
+#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
+#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
+#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
+#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
+#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
+#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
+#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
+#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
+#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
+#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
+#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
+#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
+
+/* ICU
+ * ICUISTS: status register
+ * ICUIREQ0: request register
+ * ICUIREQ1: request register
+ * ICUCR3: control register for CFIREQ# interrupt
+ * ICUCR4: control register for CFC Card insert interrupt
+ * ICUCR5: control register for CFC Card eject interrupt
+ * ICUCR6: control register for external interrupt
+ * ICUCR11: control register for MMC Card insert/eject interrupt
+ * ICUCR13: control register for SC error interrupt
+ * ICUCR14: control register for SC receive interrupt
+ * ICUCR15: control register for SC send interrupt
+ * ICUCR16: control register for SIO0 receive interrupt
+ * ICUCR17: control register for SIO0 send interrupt
+ */
+#if !defined(CONFIG_PLAT_USRV)
+#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */
+#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */
+#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */
+#define PLD_IRQ_CFIREQ (OPSPUT_PLD_IRQ_BASE + 3) /* CF IREQ */
+#define PLD_IRQ_CFC_INSERT (OPSPUT_PLD_IRQ_BASE + 4) /* CF Insert */
+#define PLD_IRQ_CFC_EJECT (OPSPUT_PLD_IRQ_BASE + 5) /* CF Eject */
+#define PLD_IRQ_EXINT (OPSPUT_PLD_IRQ_BASE + 6) /* EXINT */
+#define PLD_IRQ_INT7 (OPSPUT_PLD_IRQ_BASE + 7) /* reserved */
+#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */
+#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */
+#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */
+#define PLD_IRQ_MMCCARD (OPSPUT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
+#define PLD_IRQ_INT12 (OPSPUT_PLD_IRQ_BASE + 12) /* reserved */
+#define PLD_IRQ_SC_ERROR (OPSPUT_PLD_IRQ_BASE + 13) /* SC error */
+#define PLD_IRQ_SC_RCV (OPSPUT_PLD_IRQ_BASE + 14) /* SC receive */
+#define PLD_IRQ_SC_SND (OPSPUT_PLD_IRQ_BASE + 15) /* SC send */
+#define PLD_IRQ_SIO0_RCV (OPSPUT_PLD_IRQ_BASE + 16) /* SIO receive */
+#define PLD_IRQ_SIO0_SND (OPSPUT_PLD_IRQ_BASE + 17) /* SIO send */
+#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */
+#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */
+#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */
+#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */
+#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */
+#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */
+#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */
+#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */
+#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */
+#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */
+#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */
+#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */
+#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */
+#define PLD_IRQ_INT31 (OPSPUT_PLD_IRQ_BASE + 31) /* reserved */
+
+#else /* CONFIG_PLAT_USRV */
+
+#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */
+#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */
+#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */
+#define PLD_IRQ_CF0 (OPSPUT_PLD_IRQ_BASE + 3) /* CF0# */
+#define PLD_IRQ_CF1 (OPSPUT_PLD_IRQ_BASE + 4) /* CF1# */
+#define PLD_IRQ_CF2 (OPSPUT_PLD_IRQ_BASE + 5) /* CF2# */
+#define PLD_IRQ_CF3 (OPSPUT_PLD_IRQ_BASE + 6) /* CF3# */
+#define PLD_IRQ_CF4 (OPSPUT_PLD_IRQ_BASE + 7) /* CF4# */
+#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */
+#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */
+#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */
+#define PLD_IRQ_INT11 (OPSPUT_PLD_IRQ_BASE + 11) /* reserved */
+#define PLD_IRQ_UART0 (OPSPUT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */
+#define PLD_IRQ_UART1 (OPSPUT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */
+#define PLD_IRQ_INT14 (OPSPUT_PLD_IRQ_BASE + 14) /* reserved */
+#define PLD_IRQ_INT15 (OPSPUT_PLD_IRQ_BASE + 15) /* reserved */
+#define PLD_IRQ_SNDINT (OPSPUT_PLD_IRQ_BASE + 16) /* SNDINT# */
+#define PLD_IRQ_INT17 (OPSPUT_PLD_IRQ_BASE + 17) /* reserved */
+#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */
+#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */
+#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */
+#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */
+#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */
+#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */
+#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */
+#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */
+#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */
+#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */
+#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */
+#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */
+#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */
+
+#endif /* CONFIG_PLAT_USRV */
+
+#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
+#define PLD_ICUISTS_VECB_MASK (0xf000)
+#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
+#define PLD_ICUISTS_ISN_MASK (0x07c0)
+#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
+#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004)
+#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006)
+#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100)
+#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102)
+#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
+#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
+#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
+#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
+#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c)
+#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e)
+#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110)
+#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112)
+#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
+#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116)
+#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
+#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
+#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
+#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e)
+#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120)
+#define PLD_ICUCR_IEN (0x1000)
+#define PLD_ICUCR_IREQ (0x0100)
+#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
+#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
+#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
+#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
+#define PLD_ICUCR_ILEVEL0 (0x0000)
+#define PLD_ICUCR_ILEVEL1 (0x0001)
+#define PLD_ICUCR_ILEVEL2 (0x0002)
+#define PLD_ICUCR_ILEVEL3 (0x0003)
+#define PLD_ICUCR_ILEVEL4 (0x0004)
+#define PLD_ICUCR_ILEVEL5 (0x0005)
+#define PLD_ICUCR_ILEVEL6 (0x0006)
+#define PLD_ICUCR_ILEVEL7 (0x0007)
+
+/* Power Control of MMC and CF */
+#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
+#define PLD_CPCR_CF 0x0001
+#define PLD_CPCR_MMC 0x0002
+
+/* LED Control
+ *
+ * 1: DIP swich side
+ * 2: Reset switch side
+ */
+#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
+#define PLD_IOLED_1_ON 0x001
+#define PLD_IOLED_1_OFF 0x000
+#define PLD_IOLED_2_ON 0x002
+#define PLD_IOLED_2_OFF 0x000
+
+/* DIP Switch
+ * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
+ * 1: -
+ * 2: -
+ * 3: -
+ */
+#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
+#define PLD_IOSWSTS_IOSW2 0x0200
+#define PLD_IOSWSTS_IOSW1 0x0100
+#define PLD_IOSWSTS_IOWP0 0x0001
+
+/* CRC */
+#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
+#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
+#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
+#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
+#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
+#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
+
+/* RTC */
+#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
+#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
+#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
+#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
+#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
+
+/* SIO0 */
+#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
+#define PLD_ESIO0CR_TXEN 0x0001
+#define PLD_ESIO0CR_RXEN 0x0002
+#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
+#define PLD_ESIO0MOD0_CTSS 0x0040
+#define PLD_ESIO0MOD0_RTSS 0x0080
+#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
+#define PLD_ESIO0MOD1_LMFS 0x0010
+#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
+#define PLD_ESIO0STS_TEMP 0x0001
+#define PLD_ESIO0STS_TXCP 0x0002
+#define PLD_ESIO0STS_RXCP 0x0004
+#define PLD_ESIO0STS_TXSC 0x0100
+#define PLD_ESIO0STS_RXSC 0x0200
+#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
+#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
+#define PLD_ESIO0INTCR_TXIEN 0x0002
+#define PLD_ESIO0INTCR_RXCEN 0x0004
+#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
+#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
+#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
+
+/* SIM Card */
+#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
+#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
+#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
+#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
+#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
+#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
+#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
+
+#endif /* _OPSPUT_OPSPUT_PLD.H */
--- /dev/null
+#ifndef _ASM_M32R_PAGE_H
+#define _ASM_M32R_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#define clear_user_page(page, vaddr, pg) clear_page(page)
+#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+ alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x) ((x).pte)
+#define PTE_MASK PAGE_MASK
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pmd_val(x) ((x).pmd)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) } )
+#define __pmd(x) ((pmd_t) { (x) } )
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x) ((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ *
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
+ * and CONFIG_HIGHMEM64G options in the kernel configuration.
+ */
+
+#define __MEMORY_START CONFIG_MEMORY_START
+#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
+
+#ifdef CONFIG_MMU
+#define __PAGE_OFFSET (0x80000000)
+#else
+#define __PAGE_OFFSET (0x00000000)
+#endif
+
+#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET)
+#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define PFN_BASE (CONFIG_MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET PFN_BASE
+#define pfn_valid(pfn) (((pfn) - PFN_BASE) < max_mapnr)
+#endif /* !CONFIG_DISCONTIGMEM */
+
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC )
+
+#define devmem_is_allowed(x) 1
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_M32R_PAGE_H */
--- /dev/null
+#ifndef _ASM_M32R_PARAM_H
+#define _ASM_M32R_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
+# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _ASM_M32R_PARAM_H */
+
--- /dev/null
+#ifndef _ASM_M32R_PCI_H
+#define _ASM_M32R_PCI_H
+
+#include <asm-generic/pci.h>
+
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+#endif /* _ASM_M32R_PCI_H */
--- /dev/null
+#ifndef __ARCH_M32R_PERCPU__
+#define __ARCH_M32R_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_M32R_PERCPU__ */
--- /dev/null
+#ifndef _ASM_M32R_PGALLOC_H
+#define _ASM_M32R_PGALLOC_H
+
+#include <linux/mm.h>
+
+#include <asm/io.h>
+
+#define pmd_populate_kernel(mm, pmd, pte) \
+ set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
+
+static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t pte)
+{
+ set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+
+ return pgd;
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_page((unsigned long)pgd);
+}
+
+static __inline__ pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
+
+ return pte;
+}
+
+static __inline__ pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO);
+
+ pgtable_page_ctor(pte);
+ return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+ pgtable_page_dtor(pte);
+ __free_page(pte);
+}
+
+#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ * (In the PAE case we free the pmds as part of the pgd.)
+ */
+
+#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, x) do { } while (0)
+#define __pmd_free_tlb(tlb, x) do { } while (0)
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _ASM_M32R_PGALLOC_H */
--- /dev/null
+#ifndef _ASM_M32R_PGTABLE_2LEVEL_H
+#define _ASM_M32R_PGTABLE_2LEVEL_H
+#ifdef __KERNEL__
+
+/*
+ * traditional M32R two-level paging structure:
+ */
+
+#define PGDIR_SHIFT 22
+#define PTRS_PER_PGD 1024
+
+/*
+ * the M32R is two-level, so we don't really have any
+ * PMD directory physically.
+ */
+#define PMD_SHIFT 22
+#define PTRS_PER_PMD 1
+
+#define PTRS_PER_PTE 1024
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+ printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+static inline int pgd_none(pgd_t pgd) { return 0; }
+static inline int pgd_bad(pgd_t pgd) { return 0; }
+static inline int pgd_present(pgd_t pgd) { return 1; }
+#define pgd_clear(xp) do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesnt get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
+
+#define pgd_page_vaddr(pgd) \
+((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) >> PAGE_SHIFT) - PFN_BASE))
+#endif /* !CONFIG_DISCONTIGMEM */
+
+static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address)
+{
+ return (pmd_t *) dir;
+}
+
+#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte, 0))
+#define pte_same(a, b) (pte_val(a) == pte_val(b))
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define pte_none(x) (!pte_val(x))
+#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define PTE_FILE_MAX_BITS 29
+#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0x7f) | (((pte_val(pte) >> 10)) << 7))
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7f) << 2) | (((off) >> 7) << 10) | _PAGE_FILE })
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */
--- /dev/null
+#ifndef _ASM_M32R_PGTABLE_H
+#define _ASM_M32R_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#ifdef __KERNEL__
+/*
+ * The Linux memory management assumes a three-level page table setup. On
+ * the M32R, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * M32R mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the M32R page table tree.
+ */
+
+/* CAUTION!: If you change macro definitions in this file, you might have to
+ * change arch/m32r/mmu.S manually.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/threads.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/addrspace.h>
+#include <asm/page.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+extern pgd_t swapper_pg_dir[1024];
+extern void paging_init(void);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[1024];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+#include <asm/pgtable-2level.h>
+#endif
+
+#define pgtable_cache_init() do { } while (0)
+
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PMD_MASK (~(PMD_SIZE - 1))
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#ifndef __ASSEMBLY__
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts. That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_START KSEG2
+#define VMALLOC_END KSEG3
+
+/*
+ * M32R TLB format
+ *
+ * [0] [1:19] [20:23] [24:31]
+ * +-----------------------+----+-------------+
+ * | VPN |0000| ASID |
+ * +-----------------------+----+-------------+
+ * +-+---------------------+----+-+---+-+-+-+-+
+ * |0 PPN |0000|N|AC |L|G|V| |
+ * +-+---------------------+----+-+---+-+-+-+-+
+ * RWX
+ */
+
+#define _PAGE_BIT_DIRTY 0 /* software: page changed */
+#define _PAGE_BIT_FILE 0 /* when !present: nonlinear file
+ mapping */
+#define _PAGE_BIT_PRESENT 1 /* Valid: page is valid */
+#define _PAGE_BIT_GLOBAL 2 /* Global */
+#define _PAGE_BIT_LARGE 3 /* Large */
+#define _PAGE_BIT_EXEC 4 /* Execute */
+#define _PAGE_BIT_WRITE 5 /* Write */
+#define _PAGE_BIT_READ 6 /* Read */
+#define _PAGE_BIT_NONCACHABLE 7 /* Non cachable */
+#define _PAGE_BIT_ACCESSED 8 /* software: page referenced */
+#define _PAGE_BIT_PROTNONE 9 /* software: if not present */
+
+#define _PAGE_DIRTY (1UL << _PAGE_BIT_DIRTY)
+#define _PAGE_FILE (1UL << _PAGE_BIT_FILE)
+#define _PAGE_PRESENT (1UL << _PAGE_BIT_PRESENT)
+#define _PAGE_GLOBAL (1UL << _PAGE_BIT_GLOBAL)
+#define _PAGE_LARGE (1UL << _PAGE_BIT_LARGE)
+#define _PAGE_EXEC (1UL << _PAGE_BIT_EXEC)
+#define _PAGE_WRITE (1UL << _PAGE_BIT_WRITE)
+#define _PAGE_READ (1UL << _PAGE_BIT_READ)
+#define _PAGE_NONCACHABLE (1UL << _PAGE_BIT_NONCACHABLE)
+#define _PAGE_ACCESSED (1UL << _PAGE_BIT_ACCESSED)
+#define _PAGE_PROTNONE (1UL << _PAGE_BIT_PROTNONE)
+
+#define _PAGE_TABLE \
+ ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \
+ | _PAGE_DIRTY )
+#define _KERNPG_TABLE \
+ ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \
+ | _PAGE_DIRTY )
+#define _PAGE_CHG_MASK \
+ ( PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY )
+
+#ifdef CONFIG_MMU
+#define PAGE_NONE \
+ __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED \
+ __pgprot(_PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_SHARED_EXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ \
+ | _PAGE_ACCESSED)
+#define PAGE_COPY \
+ __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_COPY_EXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_READONLY \
+ __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)
+#define PAGE_READONLY_EXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED)
+
+#define __PAGE_KERNEL \
+ ( _PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ | _PAGE_DIRTY \
+ | _PAGE_ACCESSED )
+#define __PAGE_KERNEL_RO ( __PAGE_KERNEL & ~_PAGE_WRITE )
+#define __PAGE_KERNEL_NOCACHE ( __PAGE_KERNEL | _PAGE_NONCACHABLE)
+
+#define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL)
+
+#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+
+#else
+#define PAGE_NONE __pgprot(0)
+#define PAGE_SHARED __pgprot(0)
+#define PAGE_SHARED_EXEC __pgprot(0)
+#define PAGE_COPY __pgprot(0)
+#define PAGE_COPY_EXEC __pgprot(0)
+#define PAGE_READONLY __pgprot(0)
+#define PAGE_READONLY_EXEC __pgprot(0)
+
+#define PAGE_KERNEL __pgprot(0)
+#define PAGE_KERNEL_RO __pgprot(0)
+#define PAGE_KERNEL_NOCACHE __pgprot(0)
+#endif /* CONFIG_MMU */
+
+ /* xwr */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/* page table for 0-4MB for everybody */
+
+#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
+#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK) != _KERNPG_TABLE)
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_dirty(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_DIRTY;
+}
+
+static inline int pte_young(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_ACCESSED;
+}
+
+static inline int pte_write(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_WRITE;
+}
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+ return pte_val(pte) & _PAGE_FILE;
+}
+
+static inline int pte_special(pte_t pte)
+{
+ return 0;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_ACCESSED;
+ return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_ACCESSED;
+ return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+ return pte;
+}
+
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+ return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
+}
+
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ clear_bit(_PAGE_BIT_WRITE, ptep);
+}
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+ unsigned long prot = pgprot_val(_prot);
+
+ prot |= _PAGE_NONCACHABLE;
+ return __pgprot(prot);
+}
+
+#define pgprot_writecombine(prot) pgprot_noncached(prot)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), pgprot)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) \
+ | pgprot_val(newprot)));
+
+ return pte;
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+static inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
+{
+ pmd_val(*pmdp) = (((unsigned long) ptep) & PAGE_MASK);
+}
+
+#define pmd_page_vaddr(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#ifndef CONFIG_DISCONTIGMEM
+#define pmd_page(pmd) (mem_map + ((pmd_val(pmd) >> PAGE_SHIFT) - PFN_BASE))
+#endif /* !CONFIG_DISCONTIGMEM */
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address) \
+ (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#define pmd_index(address) \
+ (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address) \
+ ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
+#define __swp_offset(x) ((x).val >> 10)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 10) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+#endif /* !__ASSEMBLY__ */
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_PGTABLE_H */
--- /dev/null
+#include <asm-generic/poll.h>
--- /dev/null
+#ifndef _ASM_M32R_POSIX_TYPES_H
+#define _ASM_M32R_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned int __kernel_size_t;
+typedef int __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+ int val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* _ASM_M32R_POSIX_TYPES_H */
--- /dev/null
+#ifndef _ASM_M32R_PROCESSOR_H
+#define _ASM_M32R_PROCESSOR_H
+
+/*
+ * include/asm-m32r/processor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 Linus Torvalds
+ * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/kernel.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h> /* pt_regs */
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+struct cpuinfo_m32r {
+ unsigned long pgtable_cache_sz;
+ unsigned long cpu_clock;
+ unsigned long bus_clock;
+ unsigned long timer_divide;
+ unsigned long loops_per_jiffy;
+};
+
+/*
+ * capabilities of CPUs
+ */
+
+extern struct cpuinfo_m32r boot_cpu_data;
+
+#ifdef CONFIG_SMP
+extern struct cpuinfo_m32r cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+/*
+ * User space process size: 2GB (default).
+ */
+#ifdef CONFIG_MMU
+#define TASK_SIZE (0x80000000UL)
+#else
+#define TASK_SIZE (0x00400000UL)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+#define MAX_TRAPS 10
+
+struct debug_trap {
+ int nr_trap;
+ unsigned long addr[MAX_TRAPS];
+ unsigned long insn[MAX_TRAPS];
+};
+
+struct thread_struct {
+ unsigned long address;
+ unsigned long trap_no; /* Trap number */
+ unsigned long error_code; /* Error code of trap */
+ unsigned long lr; /* saved pc */
+ unsigned long sp; /* user stack pointer */
+ struct debug_trap debug_trap;
+};
+
+#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
+
+#define INIT_THREAD { \
+ .sp = INIT_SP, \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+
+/* User process Backup PSW */
+#define USERPS_BPSW (M32R_PSW_BSM|M32R_PSW_BIE|M32R_PSW_BPM)
+
+#define start_thread(regs, new_pc, new_spu) \
+ do { \
+ set_fs(USER_DS); \
+ regs->psw = (regs->psw | USERPS_BPSW) & 0x0000FFFFUL; \
+ regs->bpc = new_pc; \
+ regs->spu = new_spu; \
+ } while (0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+#define prepare_to_copy(tsk) do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+extern void copy_segments(struct task_struct *p, struct mm_struct * mm);
+extern void release_segments(struct mm_struct * mm);
+
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm) do { } while (0)
+#define release_segments(mm) do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+#define KSTK_EIP(tsk) ((tsk)->thread.lr)
+#define KSTK_ESP(tsk) ((tsk)->thread.sp)
+
+#define THREAD_SIZE (2*PAGE_SIZE)
+
+#define cpu_relax() barrier()
+
+#endif /* _ASM_M32R_PROCESSOR_H */
--- /dev/null
+#ifndef _ASM_M32R_PTRACE_H
+#define _ASM_M32R_PTRACE_H
+
+/*
+ * linux/include/asm-m32r/ptrace.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * M32R version:
+ * Copyright (C) 2001-2002, 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+/* 0 - 13 are integer registers (general purpose registers). */
+#define PT_R4 0
+#define PT_R5 1
+#define PT_R6 2
+#define PT_REGS 3
+#define PT_R0 4
+#define PT_R1 5
+#define PT_R2 6
+#define PT_R3 7
+#define PT_R7 8
+#define PT_R8 9
+#define PT_R9 10
+#define PT_R10 11
+#define PT_R11 12
+#define PT_R12 13
+#define PT_SYSCNR 14
+#define PT_R13 PT_FP
+#define PT_R14 PT_LR
+#define PT_R15 PT_SP
+
+/* processor status and miscellaneous context registers. */
+#define PT_ACC0H 15
+#define PT_ACC0L 16
+#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */
+#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */
+#define PT_PSW 19
+#define PT_BPC 20
+#define PT_BBPSW 21
+#define PT_BBPC 22
+#define PT_SPU 23
+#define PT_FP 24
+#define PT_LR 25
+#define PT_SPI 26
+#define PT_ORIGR0 27
+
+/* virtual pt_reg entry for gdb */
+#define PT_PC 30
+#define PT_CBR 31
+#define PT_EVB 32
+
+
+/* Control registers. */
+#define SPR_CR0 PT_PSW
+#define SPR_CR1 PT_CBR /* read only */
+#define SPR_CR2 PT_SPI
+#define SPR_CR3 PT_SPU
+#define SPR_CR4
+#define SPR_CR5 PT_EVB /* part of M32R/E, M32R/I core only */
+#define SPR_CR6 PT_BPC
+#define SPR_CR7
+#define SPR_CR8 PT_BBPSW
+#define SPR_CR9
+#define SPR_CR10
+#define SPR_CR11
+#define SPR_CR12
+#define SPR_CR13 PT_WR
+#define SPR_CR14 PT_BBPC
+#define SPR_CR15
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call. */
+struct pt_regs {
+ /* Saved main processor registers. */
+ unsigned long r4;
+ unsigned long r5;
+ unsigned long r6;
+ struct pt_regs *pt_regs;
+ unsigned long r0;
+ unsigned long r1;
+ unsigned long r2;
+ unsigned long r3;
+ unsigned long r7;
+ unsigned long r8;
+ unsigned long r9;
+ unsigned long r10;
+ unsigned long r11;
+ unsigned long r12;
+ long syscall_nr;
+
+ /* Saved main processor status and miscellaneous context registers. */
+ unsigned long acc0h;
+ unsigned long acc0l;
+ unsigned long acc1h; /* ISA_DSP_LEVEL2 only */
+ unsigned long acc1l; /* ISA_DSP_LEVEL2 only */
+ unsigned long psw;
+ unsigned long bpc; /* saved PC for TRAP syscalls */
+ unsigned long bbpsw;
+ unsigned long bbpc;
+ unsigned long spu; /* saved user stack */
+ unsigned long fp;
+ unsigned long lr; /* saved PC for JL syscalls */
+ unsigned long spi; /* saved kernel stack */
+ unsigned long orig_r0;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+
+#define PTRACE_OLDSETOPTIONS 21
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+#ifdef __KERNEL__
+
+#include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */
+
+struct task_struct;
+extern void init_debug_traps(struct task_struct *);
+#define arch_ptrace_attach(child) \
+ init_debug_traps(child)
+
+#if defined(CONFIG_ISA_M32R2) || defined(CONFIG_CHIP_VDEC2)
+#define user_mode(regs) ((M32R_PSW_BPM & (regs)->psw) != 0)
+#elif defined(CONFIG_ISA_M32R)
+#define user_mode(regs) ((M32R_PSW_BSM & (regs)->psw) != 0)
+#else
+#error unknown isa configuration
+#endif
+
+#define instruction_pointer(regs) ((regs)->bpc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+extern void show_regs(struct pt_regs *);
+
+extern void withdraw_debug_trap(struct pt_regs *regs);
+
+#define task_pt_regs(task) \
+ ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE) - 1)
+
+#endif /* __KERNEL */
+
+#endif /* _ASM_M32R_PTRACE_H */
--- /dev/null
+#ifndef _ASM_M32R_RESOURCE_H
+#define _ASM_M32R_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_M32R_RESOURCE_H */
--- /dev/null
+#ifndef __RTC_H__
+#define __RTC_H__
+
+ /* Dallas DS1302 clock/calendar register numbers. */
+# define RTC_SECONDS 0
+# define RTC_MINUTES 1
+# define RTC_HOURS 2
+# define RTC_DAY_OF_MONTH 3
+# define RTC_MONTH 4
+# define RTC_WEEKDAY 5
+# define RTC_YEAR 6
+# define RTC_CONTROL 7
+
+ /* Bits in CONTROL register. */
+# define RTC_CONTROL_WRITEPROTECT 0x80
+# define RTC_TRICKLECHARGER 8
+
+ /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
+# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */
+# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */
+# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */
+# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */
+# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */
+# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */
+# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */
+
+#ifdef CONFIG_DS1302
+extern unsigned char ds1302_readreg(int reg);
+extern void ds1302_writereg(int reg, unsigned char val);
+extern int ds1302_init(void);
+# define CMOS_READ(x) ds1302_readreg(x)
+# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
+# define RTC_INIT() ds1302_init()
+#else
+ /* No RTC configured so we shouldn't try to access any. */
+# define CMOS_READ(x) 42
+# define CMOS_WRITE(x,y)
+# define RTC_INIT() (-1)
+#endif
+
+/*
+ * The struct used to pass data via the following ioctl. Similar to the
+ * struct tm in <time.h>, but it needs to be here so that the kernel
+ * source is self contained, allowing cross-compiles, etc. etc.
+ */
+struct rtc_time {
+ int tm_sec;
+ int tm_min;
+ int tm_hour;
+ int tm_mday;
+ int tm_mon;
+ int tm_year;
+ int tm_wday;
+ int tm_yday;
+ int tm_isdst;
+};
+
+/* ioctl() calls that are permitted to the /dev/rtc interface. */
+#define RTC_MAGIC 'p'
+#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */
+#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */
+#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int)
+#define RTC_MAX_IOCTL 0x0b
+
+#endif /* __RTC_H__ */
--- /dev/null
+//----------------------------------------------------------------------------
+//
+// File generated by S1D13806CFG.EXE
+//
+// Copyright (c) 2000,2001 Epson Research and Development, Inc.
+// All rights reserved.
+//
+//----------------------------------------------------------------------------
+
+// Panel: (active) 640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz)
+// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz)
+
+#define SWIVEL_VIEW 0 /* 0:none, 1:90 not completed */
+
+static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
+
+ {0x0001,0x00}, // Miscellaneous Register
+ {0x01FC,0x00}, // Display Mode Register
+#if defined(CONFIG_PLAT_MAPPI)
+ {0x0004,0x00}, // General IO Pins Configuration Register 0
+ {0x0005,0x00}, // General IO Pins Configuration Register 1
+ {0x0008,0x00}, // General IO Pins Control Register 0
+ {0x0009,0x00}, // General IO Pins Control Register 1
+ {0x0010,0x00}, // Memory Clock Configuration Register
+ {0x0014,0x00}, // LCD Pixel Clock Configuration Register
+ {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register
+ {0x001C,0x00}, // MediaPlug Clock Configuration Register
+/*
+ * .. 10MHz: 0x00
+ * .. 30MHz: 0x01
+ * 30MHz ..: 0x02
+ */
+ {0x001E,0x02}, // CPU To Memory Wait State Select Register
+ {0x0021,0x02}, // DRAM Refresh Rate Register
+ {0x002A,0x11}, // DRAM Timings Control Register 0
+ {0x002B,0x13}, // DRAM Timings Control Register 1
+ {0x0020,0x80}, // Memory Configuration Register
+ {0x0030,0x25}, // Panel Type Register
+ {0x0031,0x00}, // MOD Rate Register
+ {0x0032,0x4F}, // LCD Horizontal Display Width Register
+ {0x0034,0x12}, // LCD Horizontal Non-Display Period Register
+ {0x0035,0x01}, // TFT FPLINE Start Position Register
+ {0x0036,0x0B}, // TFT FPLINE Pulse Width Register
+ {0x0038,0xDF}, // LCD Vertical Display Height Register 0
+ {0x0039,0x01}, // LCD Vertical Display Height Register 1
+ {0x003A,0x2C}, // LCD Vertical Non-Display Period Register
+ {0x003B,0x0A}, // TFT FPFRAME Start Position Register
+ {0x003C,0x01}, // TFT FPFRAME Pulse Width Register
+
+ {0x0041,0x00}, // LCD Miscellaneous Register
+ {0x0042,0x00}, // LCD Display Start Address Register 0
+ {0x0043,0x00}, // LCD Display Start Address Register 1
+ {0x0044,0x00}, // LCD Display Start Address Register 2
+
+#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
+ {0x0004,0x07}, // GPIO[0:7] direction
+ {0x0005,0x00}, // GPIO[8:12] direction
+ {0x0008,0x00}, // GPIO[0:7] data
+ {0x0009,0x00}, // GPIO[8:12] data
+ {0x0008,0x04}, // LCD panel Vcc on
+ {0x0008,0x05}, // LCD panel reset
+ {0x0010,0x01}, // Memory Clock Configuration Register
+ {0x0014,0x30}, // LCD Pixel Clock Configuration Register (CLKI 22MHz/4)
+ {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register
+ {0x001C,0x00}, // MediaPlug Clock Configuration Register(10MHz)
+ {0x001E,0x00}, // CPU To Memory Wait State Select Register
+ {0x0020,0x80}, // Memory Configuration Register
+ {0x0021,0x03}, // DRAM Refresh Rate Register
+ {0x002A,0x00}, // DRAM Timings Control Register 0
+ {0x002B,0x01}, // DRAM Timings Control Register 1
+ {0x0030,0x25}, // Panel Type Register
+ {0x0031,0x00}, // MOD Rate Register
+ {0x0032,0x1d}, // LCD Horizontal Display Width Register
+ {0x0034,0x05}, // LCD Horizontal Non-Display Period Register
+ {0x0035,0x01}, // TFT FPLINE Start Position Register
+ {0x0036,0x01}, // TFT FPLINE Pulse Width Register
+ {0x0038,0x3F}, // LCD Vertical Display Height Register 0
+ {0x0039,0x01}, // LCD Vertical Display Height Register 1
+ {0x003A,0x0b}, // LCD Vertical Non-Display Period Register
+ {0x003B,0x07}, // TFT FPFRAME Start Position Register
+ {0x003C,0x02}, // TFT FPFRAME Pulse Width Register
+
+ {0x0041,0x00}, // LCD Miscellaneous Register
+#if (SWIVEL_VIEW == 0)
+ {0x0042,0x00}, // LCD Display Start Address Register 0
+ {0x0043,0x00}, // LCD Display Start Address Register 1
+ {0x0044,0x00}, // LCD Display Start Address Register 2
+
+#elif (SWIVEL_VIEW == 1)
+ // 1024 - W(320) = 0x2C0
+ {0x0042,0xC0}, // LCD Display Start Address Register 0
+ {0x0043,0x02}, // LCD Display Start Address Register 1
+ {0x0044,0x00}, // LCD Display Start Address Register 2
+ // 1024
+ {0x0046,0x00}, // LCD Memory Address Offset Register 0
+ {0x0047,0x02}, // LCD Memory Address Offset Register 1
+#else
+#error unsupported SWIVEL_VIEW mode
+#endif
+#else
+#error no platform configuration
+#endif /* CONFIG_PLAT_XXX */
+
+ {0x0048,0x00}, // LCD Pixel Panning Register
+ {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
+ {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
+ {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
+ {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
+ {0x0053,0x01}, // CRT/TV HRTC Start Position Register
+ {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
+ {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
+ {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
+ {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
+ {0x0059,0x09}, // CRT/TV VRTC Start Position Register
+ {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
+ {0x005B,0x10}, // TV Output Control Register
+
+ {0x0062,0x00}, // CRT/TV Display Start Address Register 0
+ {0x0063,0x00}, // CRT/TV Display Start Address Register 1
+ {0x0064,0x00}, // CRT/TV Display Start Address Register 2
+
+ {0x0068,0x00}, // CRT/TV Pixel Panning Register
+ {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
+ {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
+ {0x0070,0x00}, // LCD Ink/Cursor Control Register
+ {0x0071,0x01}, // LCD Ink/Cursor Start Address Register
+ {0x0072,0x00}, // LCD Cursor X Position Register 0
+ {0x0073,0x00}, // LCD Cursor X Position Register 1
+ {0x0074,0x00}, // LCD Cursor Y Position Register 0
+ {0x0075,0x00}, // LCD Cursor Y Position Register 1
+ {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
+ {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
+ {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
+ {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
+ {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
+ {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
+ {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
+ {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
+ {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register
+ {0x0082,0x00}, // CRT/TV Cursor X Position Register 0
+ {0x0083,0x00}, // CRT/TV Cursor X Position Register 1
+ {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
+ {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
+ {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
+ {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
+ {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
+ {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
+ {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
+ {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
+ {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
+ {0x0100,0x00}, // BitBlt Control Register 0
+ {0x0101,0x00}, // BitBlt Control Register 1
+ {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
+ {0x0103,0x00}, // BitBlt Operation Register
+ {0x0104,0x00}, // BitBlt Source Start Address Register 0
+ {0x0105,0x00}, // BitBlt Source Start Address Register 1
+ {0x0106,0x00}, // BitBlt Source Start Address Register 2
+ {0x0108,0x00}, // BitBlt Destination Start Address Register 0
+ {0x0109,0x00}, // BitBlt Destination Start Address Register 1
+ {0x010A,0x00}, // BitBlt Destination Start Address Register 2
+ {0x010C,0x00}, // BitBlt Memory Address Offset Register 0
+ {0x010D,0x00}, // BitBlt Memory Address Offset Register 1
+ {0x0110,0x00}, // BitBlt Width Register 0
+ {0x0111,0x00}, // BitBlt Width Register 1
+ {0x0112,0x00}, // BitBlt Height Register 0
+ {0x0113,0x00}, // BitBlt Height Register 1
+ {0x0114,0x00}, // BitBlt Background Color Register 0
+ {0x0115,0x00}, // BitBlt Background Color Register 1
+ {0x0118,0x00}, // BitBlt Foreground Color Register 0
+ {0x0119,0x00}, // BitBlt Foreground Color Register 1
+ {0x01E0,0x00}, // Look-Up Table Mode Register
+ {0x01E2,0x00}, // Look-Up Table Address Register
+ {0x01F0,0x10}, // Power Save Configuration Register
+ {0x01F1,0x00}, // Power Save Status Register
+ {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
+#if (SWIVEL_VIEW == 0)
+ {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
+#elif (SWIVEL_VIEW == 1)
+ {0x01FC,0x41}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
+#else
+#error unsupported SWIVEL_VIEW mode
+#endif /* SWIVEL_VIEW */
+
+#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
+ {0x0008,0x07}, // LCD panel Vdd & Vg on
+#endif
+
+ {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
+#if defined(CONFIG_PLAT_MAPPI)
+ {0x0046,0x80}, // LCD Memory Address Offset Register 0
+ {0x0047,0x02}, // LCD Memory Address Offset Register 1
+#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
+ {0x0046,0xf0}, // LCD Memory Address Offset Register 0
+ {0x0047,0x00}, // LCD Memory Address Offset Register 1
+#endif
+ {0x0060,0x05}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
+ {0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 // takeo
+ {0x0067,0x02}, // CRT/TV Memory Address Offset Register 1
+};
--- /dev/null
+#ifndef _ASM_M32R_SCATTERLIST_H
+#define _ASM_M32R_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ char * address; /* Location data is to be transferred to, NULL for
+ * highmem page */
+ unsigned long page_link;
+ unsigned int offset;/* for highmem, page offset */
+
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0x1fffffff)
+
+#endif /* _ASM_M32R_SCATTERLIST_H */
--- /dev/null
+#ifndef _M32R_SECTIONS_H
+#define _M32R_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+#endif /* _M32R_SECTIONS_H */
--- /dev/null
+#ifndef _ASM_M32R_SEGMENT_H
+#define _ASM_M32R_SEGMENT_H
+
+#define __KERNEL_CS 0x10
+#define __KERNEL_DS 0x18
+
+#define __USER_CS 0x23
+#define __USER_DS 0x2B
+
+#endif /* _ASM_M32R_SEGMENT_H */
--- /dev/null
+#ifndef _ASM_M32R_SEMBUF_H
+#define _ASM_M32R_SEMBUF_H
+
+/*
+ * The semid64_ds structure for m32r architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_M32R_SEMBUF_H */
--- /dev/null
+#ifndef _ASM_M32R_SERIAL_H
+#define _ASM_M32R_SERIAL_H
+
+/* include/asm-m32r/serial.h */
+
+
+#define BASE_BAUD 115200
+
+#endif /* _ASM_M32R_SERIAL_H */
--- /dev/null
+#ifndef _ASM_M32R_SETUP_H
+#define _ASM_M32R_SETUP_H
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+
+#define COMMAND_LINE_SIZE 512
+
+#ifdef __KERNEL__
+
+#define PARAM ((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+
+#define M32R_CPUCLK (*(unsigned long *) (PARAM+0x018))
+#define M32R_BUSCLK (*(unsigned long *) (PARAM+0x01c))
+#define M32R_TIMER_DIVIDE (*(unsigned long *) (PARAM+0x020))
+
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
+#define SCREEN_INFO (*(struct screen_info *) (PARAM+0x200))
+
+#define RAMDISK_IMAGE_START_MASK (0x07FF)
+#define RAMDISK_PROMPT_FLAG (0x8000)
+#define RAMDISK_LOAD_FLAG (0x4000)
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_SETUP_H */
--- /dev/null
+#ifndef _ASM_M32R_SHMBUF_H
+#define _ASM_M32R_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for M32R architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_M32R_SHMBUF_H */
--- /dev/null
+#ifndef _ASM_M32R_SHMPARAM_H
+#define _ASM_M32R_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_M32R_SHMPARAM_H */
--- /dev/null
+#ifndef _ASM_M32R_SIGCONTEXT_H
+#define _ASM_M32R_SIGCONTEXT_H
+
+struct sigcontext {
+ /* CPU registers */
+ /* Saved main processor registers. */
+ unsigned long sc_r4;
+ unsigned long sc_r5;
+ unsigned long sc_r6;
+ struct pt_regs *sc_pt_regs;
+ unsigned long sc_r0;
+ unsigned long sc_r1;
+ unsigned long sc_r2;
+ unsigned long sc_r3;
+ unsigned long sc_r7;
+ unsigned long sc_r8;
+ unsigned long sc_r9;
+ unsigned long sc_r10;
+ unsigned long sc_r11;
+ unsigned long sc_r12;
+
+ /* Saved main processor status and miscellaneous context registers. */
+ unsigned long sc_acc0h;
+ unsigned long sc_acc0l;
+ unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */
+ unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */
+ unsigned long sc_psw;
+ unsigned long sc_bpc; /* saved PC for TRAP syscalls */
+ unsigned long sc_bbpsw;
+ unsigned long sc_bbpc;
+ unsigned long sc_spu; /* saved user stack */
+ unsigned long sc_fp;
+ unsigned long sc_lr; /* saved PC for JL syscalls */
+ unsigned long sc_spi; /* saved kernel stack */
+
+ unsigned long oldmask;
+};
+
+#endif /* _ASM_M32R_SIGCONTEXT_H */
--- /dev/null
+#ifndef _M32R_SIGINFO_H
+#define _M32R_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* _M32R_SIGINFO_H */
--- /dev/null
+#ifndef _ASM_M32R_SIGNAL_H
+#define _ASM_M32R_SIGNAL_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <linux/compiler.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001u
+#define SA_NOCLDWAIT 0x00000002u
+#define SA_SIGINFO 0x00000004u
+#define SA_ONSTACK 0x08000000u
+#define SA_RESTART 0x10000000u
+#define SA_NODEFER 0x40000000u
+#define SA_RESETHAND 0x80000000u
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#undef __HAVE_ARCH_SIG_BITOPS
+
+struct pt_regs;
+extern int do_signal(struct pt_regs *regs, sigset_t *oldset);
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_SIGNAL_H */
--- /dev/null
+#ifndef _ASM_M32R_SMP_H
+#define _ASM_M32R_SMP_H
+
+#ifdef CONFIG_SMP
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/spinlock.h>
+#include <linux/threads.h>
+#include <asm/m32r.h>
+
+#define PHYSID_ARRAY_SIZE 1
+
+struct physid_mask
+{
+ unsigned long mask[PHYSID_ARRAY_SIZE];
+};
+
+typedef struct physid_mask physid_mask_t;
+
+#define physid_set(physid, map) set_bit(physid, (map).mask)
+#define physid_clear(physid, map) clear_bit(physid, (map).mask)
+#define physid_isset(physid, map) test_bit(physid, (map).mask)
+#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask)
+
+#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS)
+#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS)
+#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS)
+#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS)
+#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+#define physids_coerce(map) ((map).mask[0])
+
+#define physids_promote(physids) \
+ ({ \
+ physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
+ __physid_mask.mask[0] = physids; \
+ __physid_mask; \
+ })
+
+#define physid_mask_of_physid(physid) \
+ ({ \
+ physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
+ physid_set(physid, __physid_mask); \
+ __physid_mask; \
+ })
+
+#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
+#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
+
+extern physid_mask_t phys_cpu_present_map;
+
+/*
+ * Some lowlevel functions might want to know about
+ * the real CPU ID <-> CPU # mapping.
+ */
+extern volatile int cpu_2_physid[NR_CPUS];
+#define cpu_to_physid(cpu_id) cpu_2_physid[cpu_id]
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern cpumask_t cpu_callout_map;
+
+static __inline__ int hard_smp_processor_id(void)
+{
+ return (int)*(volatile long *)M32R_CPUID_PORTL;
+}
+
+static __inline__ int cpu_logical_map(int cpu)
+{
+ return cpu;
+}
+
+static __inline__ int cpu_number_map(int cpu)
+{
+ return cpu;
+}
+
+static __inline__ unsigned int num_booting_cpus(void)
+{
+ return cpus_weight(cpu_callout_map);
+}
+
+extern void smp_send_timer(void);
+extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* not __ASSEMBLY__ */
+
+#define NO_PROC_ID (0xff) /* No processor magic marker */
+
+#define PROC_CHANGE_PENALTY (15) /* Schedule penalty */
+
+/*
+ * M32R-mp IPI
+ */
+#define RESCHEDULE_IPI (M32R_IRQ_IPI0-M32R_IRQ_IPI0)
+#define INVALIDATE_TLB_IPI (M32R_IRQ_IPI1-M32R_IRQ_IPI0)
+#define CALL_FUNCTION_IPI (M32R_IRQ_IPI2-M32R_IRQ_IPI0)
+#define LOCAL_TIMER_IPI (M32R_IRQ_IPI3-M32R_IRQ_IPI0)
+#define INVALIDATE_CACHE_IPI (M32R_IRQ_IPI4-M32R_IRQ_IPI0)
+#define CPU_BOOT_IPI (M32R_IRQ_IPI5-M32R_IRQ_IPI0)
+#define CALL_FUNC_SINGLE_IPI (M32R_IRQ_IPI6-M32R_IRQ_IPI0)
+
+#define IPI_SHIFT (0)
+#define NR_IPIS (8)
+
+#else /* CONFIG_SMP */
+
+#define hard_smp_processor_id() 0
+
+#endif /* CONFIG_SMP */
+
+#endif /* _ASM_M32R_SMP_H */
--- /dev/null
+#ifndef _ASM_M32R_SOCKET_H
+#define _ASM_M32R_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
+#endif /* _ASM_M32R_SOCKET_H */
--- /dev/null
+#ifndef _ASM_M32R_SOCKIOS_H
+#define _ASM_M32R_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_M32R_SOCKIOS_H */
--- /dev/null
+#ifndef _ASM_M32R_SPINLOCK_H
+#define _ASM_M32R_SPINLOCK_H
+
+/*
+ * linux/include/asm-m32r/spinlock.h
+ *
+ * M32R version:
+ * Copyright (C) 2001, 2002 Hitoshi Yamamoto
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/compiler.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ *
+ * Simple spin lock operations. There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ */
+
+#define __raw_spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0)
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_unlock_wait(x) \
+ do { cpu_relax(); } while (__raw_spin_is_locked(x))
+
+/**
+ * __raw_spin_trylock - Try spin lock and return a result
+ * @lock: Pointer to the lock variable
+ *
+ * __raw_spin_trylock() tries to get the lock and returns a result.
+ * On the m32r, the result value is 1 (= Success) or 0 (= Failure).
+ */
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+ int oldval;
+ unsigned long tmp1, tmp2;
+
+ /*
+ * lock->slock : =1 : unlock
+ * : <=0 : lock
+ * {
+ * oldval = lock->slock; <--+ need atomic operation
+ * lock->slock = 0; <--+
+ * }
+ */
+ __asm__ __volatile__ (
+ "# __raw_spin_trylock \n\t"
+ "ldi %1, #0; \n\t"
+ "mvfc %2, psw; \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r6", "%3")
+ "lock %0, @%3; \n\t"
+ "unlock %1, @%3; \n\t"
+ "mvtc %2, psw; \n\t"
+ : "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
+ : "r" (&lock->slock)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+
+ return (oldval > 0);
+}
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ unsigned long tmp0, tmp1;
+
+ /*
+ * lock->slock : =1 : unlock
+ * : <=0 : lock
+ *
+ * for ( ; ; ) {
+ * lock->slock -= 1; <-- need atomic operation
+ * if (lock->slock == 0) break;
+ * for ( ; lock->slock <= 0 ; );
+ * }
+ */
+ __asm__ __volatile__ (
+ "# __raw_spin_lock \n\t"
+ ".fillinsn \n"
+ "1: \n\t"
+ "mvfc %1, psw; \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r6", "%2")
+ "lock %0, @%2; \n\t"
+ "addi %0, #-1; \n\t"
+ "unlock %0, @%2; \n\t"
+ "mvtc %1, psw; \n\t"
+ "bltz %0, 2f; \n\t"
+ LOCK_SECTION_START(".balign 4 \n\t")
+ ".fillinsn \n"
+ "2: \n\t"
+ "ld %0, @%2; \n\t"
+ "bgtz %0, 1b; \n\t"
+ "bra 2b; \n\t"
+ LOCK_SECTION_END
+ : "=&r" (tmp0), "=&r" (tmp1)
+ : "r" (&lock->slock)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ mb();
+ lock->slock = 1;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ *
+ * Changed to use the same technique as rw semaphores. See
+ * semaphore.h for details. -ben
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(x) ((int)(x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+ unsigned long tmp0, tmp1;
+
+ /*
+ * rw->lock : >0 : unlock
+ * : <=0 : lock
+ *
+ * for ( ; ; ) {
+ * rw->lock -= 1; <-- need atomic operation
+ * if (rw->lock >= 0) break;
+ * rw->lock += 1; <-- need atomic operation
+ * for ( ; rw->lock <= 0 ; );
+ * }
+ */
+ __asm__ __volatile__ (
+ "# read_lock \n\t"
+ ".fillinsn \n"
+ "1: \n\t"
+ "mvfc %1, psw; \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r6", "%2")
+ "lock %0, @%2; \n\t"
+ "addi %0, #-1; \n\t"
+ "unlock %0, @%2; \n\t"
+ "mvtc %1, psw; \n\t"
+ "bltz %0, 2f; \n\t"
+ LOCK_SECTION_START(".balign 4 \n\t")
+ ".fillinsn \n"
+ "2: \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r6", "%2")
+ "lock %0, @%2; \n\t"
+ "addi %0, #1; \n\t"
+ "unlock %0, @%2; \n\t"
+ "mvtc %1, psw; \n\t"
+ ".fillinsn \n"
+ "3: \n\t"
+ "ld %0, @%2; \n\t"
+ "bgtz %0, 1b; \n\t"
+ "bra 3b; \n\t"
+ LOCK_SECTION_END
+ : "=&r" (tmp0), "=&r" (tmp1)
+ : "r" (&rw->lock)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+ unsigned long tmp0, tmp1, tmp2;
+
+ /*
+ * rw->lock : =RW_LOCK_BIAS_STR : unlock
+ * : !=RW_LOCK_BIAS_STR : lock
+ *
+ * for ( ; ; ) {
+ * rw->lock -= RW_LOCK_BIAS_STR; <-- need atomic operation
+ * if (rw->lock == 0) break;
+ * rw->lock += RW_LOCK_BIAS_STR; <-- need atomic operation
+ * for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ;
+ * }
+ */
+ __asm__ __volatile__ (
+ "# write_lock \n\t"
+ "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t"
+ "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t"
+ ".fillinsn \n"
+ "1: \n\t"
+ "mvfc %2, psw; \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r7", "%3")
+ "lock %0, @%3; \n\t"
+ "sub %0, %1; \n\t"
+ "unlock %0, @%3; \n\t"
+ "mvtc %2, psw; \n\t"
+ "bnez %0, 2f; \n\t"
+ LOCK_SECTION_START(".balign 4 \n\t")
+ ".fillinsn \n"
+ "2: \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r7", "%3")
+ "lock %0, @%3; \n\t"
+ "add %0, %1; \n\t"
+ "unlock %0, @%3; \n\t"
+ "mvtc %2, psw; \n\t"
+ ".fillinsn \n"
+ "3: \n\t"
+ "ld %0, @%3; \n\t"
+ "beq %0, %1, 1b; \n\t"
+ "bra 3b; \n\t"
+ LOCK_SECTION_END
+ : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
+ : "r" (&rw->lock)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r7"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ unsigned long tmp0, tmp1;
+
+ __asm__ __volatile__ (
+ "# read_unlock \n\t"
+ "mvfc %1, psw; \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r6", "%2")
+ "lock %0, @%2; \n\t"
+ "addi %0, #1; \n\t"
+ "unlock %0, @%2; \n\t"
+ "mvtc %1, psw; \n\t"
+ : "=&r" (tmp0), "=&r" (tmp1)
+ : "r" (&rw->lock)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r6"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ unsigned long tmp0, tmp1, tmp2;
+
+ __asm__ __volatile__ (
+ "# write_unlock \n\t"
+ "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t"
+ "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t"
+ "mvfc %2, psw; \n\t"
+ "clrpsw #0x40 -> nop; \n\t"
+ DCACHE_CLEAR("%0", "r7", "%3")
+ "lock %0, @%3; \n\t"
+ "add %0, %1; \n\t"
+ "unlock %0, @%3; \n\t"
+ "mvtc %2, psw; \n\t"
+ : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
+ : "r" (&rw->lock)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r7"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t*)lock;
+ if (atomic_dec_return(count) >= 0)
+ return 1;
+ atomic_inc(count);
+ return 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *lock)
+{
+ atomic_t *count = (atomic_t *)lock;
+ if (atomic_sub_and_test(RW_LOCK_BIAS, count))
+ return 1;
+ atomic_add(RW_LOCK_BIAS, count);
+ return 0;
+}
+
+#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
+#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
+
+#define _raw_spin_relax(lock) cpu_relax()
+#define _raw_read_relax(lock) cpu_relax()
+#define _raw_write_relax(lock) cpu_relax()
+
+#endif /* _ASM_M32R_SPINLOCK_H */
--- /dev/null
+#ifndef _ASM_M32R_SPINLOCK_TYPES_H
+#define _ASM_M32R_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+ volatile int slock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED { 1 }
+
+typedef struct {
+ volatile int lock;
+} raw_rwlock_t;
+
+#define RW_LOCK_BIAS 0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
+
+#endif /* _ASM_M32R_SPINLOCK_TYPES_H */
--- /dev/null
+#ifndef _ASM_M32R_STAT_H
+#define _ASM_M32R_STAT_H
+
+#include <asm/byteorder.h>
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat {
+ unsigned short st_dev;
+ unsigned short __pad1;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned short __pad2;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad0[4];
+#define STAT64_HAS_BROKEN_ST_INO
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[4];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+#if defined(__BIG_ENDIAN)
+ unsigned long __pad4; /* future possible st_blocks high bits */
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+#elif defined(__LITTLE_ENDIAN)
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long __pad4; /* future possible st_blocks high bits */
+#else
+#error no endian defined
+#endif
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#endif /* _ASM_M32R_STAT_H */
--- /dev/null
+#ifndef _ASM_M32R_STATFS_H
+#define _ASM_M32R_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _ASM_M32R_STATFS_H */
--- /dev/null
+#ifndef _ASM_M32R_STRING_H
+#define _ASM_M32R_STRING_H
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char * s);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#endif /* _ASM_M32R_STRING_H */
--- /dev/null
+#ifndef _ASM_M32R_SWAB_H
+#define _ASM_M32R_SWAB_H
+
+#include <linux/types.h>
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* _ASM_M32R_SWAB_H */
--- /dev/null
+#ifndef _ASM_M32R_SYSCALL_H
+#define _ASM_M32R_SYSCALL_H
+
+/* Definitions for the system call vector. */
+#define SYSCALL_VECTOR "2"
+#define SYSCALL_VECTOR_ADDRESS "0xa0"
+
+#endif /* _ASM_M32R_SYSCALL_H */
--- /dev/null
+#ifndef _ASM_M32R_SYSTEM_H
+#define _ASM_M32R_SYSTEM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
+ * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#include <linux/compiler.h>
+#include <asm/assembler.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.
+ *
+ * `next' and `prev' should be struct task_struct, but it isn't always defined
+ */
+
+#if defined(CONFIG_FRAME_POINTER) || \
+ !defined(CONFIG_SCHED_OMIT_FRAME_POINTER)
+#define M32R_PUSH_FP " push fp\n"
+#define M32R_POP_FP " pop fp\n"
+#else
+#define M32R_PUSH_FP ""
+#define M32R_POP_FP ""
+#endif
+
+#define switch_to(prev, next, last) do { \
+ __asm__ __volatile__ ( \
+ " seth lr, #high(1f) \n" \
+ " or3 lr, lr, #low(1f) \n" \
+ " st lr, @%4 ; store old LR \n" \
+ " ld lr, @%5 ; load new LR \n" \
+ M32R_PUSH_FP \
+ " st sp, @%2 ; store old SP \n" \
+ " ld sp, @%3 ; load new SP \n" \
+ " push %1 ; store `prev' on new stack \n" \
+ " jmp lr \n" \
+ " .fillinsn \n" \
+ "1: \n" \
+ " pop %0 ; restore `__last' from new stack \n" \
+ M32R_POP_FP \
+ : "=r" (last) \
+ : "0" (prev), \
+ "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \
+ "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \
+ : "memory", "lr" \
+ ); \
+} while(0)
+
+/* Interrupt Control */
+#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104)
+#define local_irq_enable() \
+ __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory")
+#define local_irq_disable() \
+ __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory")
+#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+static inline void local_irq_enable(void)
+{
+ unsigned long tmpreg;
+ __asm__ __volatile__(
+ "mvfc %0, psw; \n\t"
+ "or3 %0, %0, #0x0040; \n\t"
+ "mvtc %0, psw; \n\t"
+ : "=&r" (tmpreg) : : "cbit", "memory");
+}
+
+static inline void local_irq_disable(void)
+{
+ unsigned long tmpreg0, tmpreg1;
+ __asm__ __volatile__(
+ "ld24 %0, #0 ; Use 32-bit insn. \n\t"
+ "mvfc %1, psw ; No interrupt can be accepted here. \n\t"
+ "mvtc %0, psw \n\t"
+ "and3 %0, %1, #0xffbf \n\t"
+ "mvtc %0, psw \n\t"
+ : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory");
+}
+#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+
+#define local_save_flags(x) \
+ __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */)
+
+#define local_irq_restore(x) \
+ __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \
+ : "r" (x) : "cbit", "memory")
+
+#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
+#define local_irq_save(x) \
+ __asm__ __volatile__( \
+ "mvfc %0, psw; \n\t" \
+ "clrpsw #0x40 -> nop; \n\t" \
+ : "=r" (x) : /* no input */ : "memory")
+#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+#define local_irq_save(x) \
+ ({ \
+ unsigned long tmpreg; \
+ __asm__ __volatile__( \
+ "ld24 %1, #0 \n\t" \
+ "mvfc %0, psw \n\t" \
+ "mvtc %1, psw \n\t" \
+ "and3 %1, %0, #0xffbf \n\t" \
+ "mvtc %1, psw \n\t" \
+ : "=r" (x), "=&r" (tmpreg) \
+ : : "cbit", "memory"); \
+ })
+#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
+
+#define irqs_disabled() \
+ ({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ !(flags & 0x40); \
+ })
+
+#define nop() __asm__ __volatile__ ("nop" : : )
+
+#define xchg(ptr, x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg_local(ptr, x) \
+ ((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \
+ sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#ifdef CONFIG_CHIP_M32700_TS1
+#define DCACHE_CLEAR(reg0, reg1, addr) \
+ "seth "reg1", #high(dcache_dummy); \n\t" \
+ "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \
+ "lock "reg0", @"reg1"; \n\t" \
+ "add3 "reg0", "addr", #0x1000; \n\t" \
+ "ld "reg0", @"reg0"; \n\t" \
+ "add3 "reg0", "addr", #0x2000; \n\t" \
+ "ld "reg0", @"reg0"; \n\t" \
+ "unlock "reg0", @"reg1"; \n\t"
+ /* FIXME: This workaround code cannot handle kernel modules
+ * correctly under SMP environment.
+ */
+#else /* CONFIG_CHIP_M32700_TS1 */
+#define DCACHE_CLEAR(reg0, reg1, addr)
+#endif /* CONFIG_CHIP_M32700_TS1 */
+
+static __always_inline unsigned long
+__xchg(unsigned long x, volatile void *ptr, int size)
+{
+ unsigned long flags;
+ unsigned long tmp = 0;
+
+ local_irq_save(flags);
+
+ switch (size) {
+#ifndef CONFIG_SMP
+ case 1:
+ __asm__ __volatile__ (
+ "ldb %0, @%2 \n\t"
+ "stb %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__ (
+ "ldh %0, @%2 \n\t"
+ "sth %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__ (
+ "ld %0, @%2 \n\t"
+ "st %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+#else /* CONFIG_SMP */
+ case 4:
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%2")
+ "lock %0, @%2; \n\t"
+ "unlock %1, @%2; \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr)
+ : "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ break;
+#endif /* CONFIG_SMP */
+ default:
+ __xchg_called_with_bad_pointer();
+ }
+
+ local_irq_restore(flags);
+
+ return (tmp);
+}
+
+static __always_inline unsigned long
+__xchg_local(unsigned long x, volatile void *ptr, int size)
+{
+ unsigned long flags;
+ unsigned long tmp = 0;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__ (
+ "ldb %0, @%2 \n\t"
+ "stb %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__ (
+ "ldh %0, @%2 \n\t"
+ "sth %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__ (
+ "ld %0, @%2 \n\t"
+ "st %1, @%2 \n\t"
+ : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
+ break;
+ default:
+ __xchg_called_with_bad_pointer();
+ }
+
+ local_irq_restore(flags);
+
+ return (tmp);
+}
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
+{
+ unsigned long flags;
+ unsigned int retval;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%1")
+ M32R_LOCK" %0, @%1; \n"
+ " bne %0, %2, 1f; \n"
+ M32R_UNLOCK" %3, @%1; \n"
+ " bra 2f; \n"
+ " .fillinsn \n"
+ "1:"
+ M32R_UNLOCK" %0, @%1; \n"
+ " .fillinsn \n"
+ "2:"
+ : "=&r" (retval)
+ : "r" (p), "r" (old), "r" (new)
+ : "cbit", "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static inline unsigned long
+__cmpxchg_local_u32(volatile unsigned int *p, unsigned int old,
+ unsigned int new)
+{
+ unsigned long flags;
+ unsigned int retval;
+
+ local_irq_save(flags);
+ __asm__ __volatile__ (
+ DCACHE_CLEAR("%0", "r4", "%1")
+ "ld %0, @%1; \n"
+ " bne %0, %2, 1f; \n"
+ "st %3, @%1; \n"
+ " bra 2f; \n"
+ " .fillinsn \n"
+ "1:"
+ "st %0, @%1; \n"
+ " .fillinsn \n"
+ "2:"
+ : "=&r" (retval)
+ : "r" (p), "r" (old), "r" (new)
+ : "cbit", "memory"
+#ifdef CONFIG_CHIP_M32700_TS1
+ , "r4"
+#endif /* CONFIG_CHIP_M32700_TS1 */
+ );
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+ if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_u32(ptr, old, new);
+#if 0 /* we don't have __cmpxchg_u64 */
+ case 8:
+ return __cmpxchg_u64(ptr, old, new);
+#endif /* 0 */
+ }
+ __cmpxchg_called_with_bad_pointer();
+ return old;
+}
+
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ switch (size) {
+ case 4:
+ return __cmpxchg_local_u32(ptr, old, new);
+ default:
+ return __cmpxchg_local_generic(ptr, old, new, size);
+ }
+
+ return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
+ (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* __KERNEL__ */
+
+/*
+ * Memory barrier.
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ */
+#define mb() barrier()
+#define rmb() mb()
+#define wmb() mb()
+
+/**
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier. All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads. This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies. See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * b = 2;
+ * memory_barrier();
+ * p = &b; q = p;
+ * read_barrier_depends();
+ * d = *q;
+ * </programlisting>
+ *
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends(). However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * a = 2;
+ * memory_barrier();
+ * b = 3; y = b;
+ * read_barrier_depends();
+ * x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b". Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
+ * in cases like this where there are no data dependencies.
+ **/
+
+#define read_barrier_depends() do { } while (0)
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
+#define set_mb(var, value) do { var = value; barrier(); } while (0)
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_M32R_SYSTEM_H */
--- /dev/null
+#ifndef _ASM_M32R_TERMBITS_H
+#define _ASM_M32R_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /** input baud rate */
+#define CTVB 004000000000 /* VisioBraille Terminal flow control */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_M32R_TERMBITS_H */
--- /dev/null
+#ifndef _M32R_TERMIOS_H
+#define _M32R_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/* intr=^C quit=^\ erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp,&(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* __KERNEL__ */
+
+#endif /* _M32R_TERMIOS_H */
--- /dev/null
+#ifndef _ASM_M32R_THREAD_INFO_H
+#define _ASM_M32R_THREAD_INFO_H
+
+/* thread_info.h: m32r low-level thread information
+ *
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ unsigned long status; /* thread-synchronous flags */
+ __u32 cpu; /* current CPU */
+ int preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space:
+ 0-0xBFFFFFFF for user-thread
+ 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+
+ __u8 supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK 0x00000000
+#define TI_EXEC_DOMAIN 0x00000004
+#define TI_FLAGS 0x00000008
+#define TI_STATUS 0x0000000C
+#define TI_CPU 0x00000010
+#define TI_PRE_COUNT 0x00000014
+#define TI_ADDR_LIMIT 0x00000018
+#define TI_RESTART_BLOCK 0x000001C
+
+#endif
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+#define THREAD_SIZE (2*PAGE_SIZE)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+
+ __asm__ __volatile__ (
+ "ldi %0, #%1 \n\t"
+ "and %0, sp \n\t"
+ : "=r" (ti) : "i" (~(THREAD_SIZE - 1))
+ );
+
+ return ti;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) \
+ ({ \
+ struct thread_info *ret; \
+ \
+ ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \
+ \
+ ret; \
+ })
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(info) kfree(info)
+
+#define TI_FLAG_FAULT_CODE_SHIFT 28
+
+static inline void set_thread_fault_code(unsigned int val)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
+ | (val << TI_FLAG_FAULT_CODE_SHIFT);
+}
+
+static inline unsigned int get_thread_fault_code(void)
+{
+ struct thread_info *ti = current_thread_info();
+ return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
+}
+
+#else /* !__ASSEMBLY__ */
+
+#define THREAD_SIZE 8192
+
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg
+ .macro GET_THREAD_INFO reg
+ ldi \reg, #-THREAD_SIZE
+ and \reg, sp
+ .endm
+
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_SIGPENDING 1 /* signal pending */
+#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
+#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
+#define TIF_IRET 4 /* return with iret */
+#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */
+#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 18 /* OOM killer killed process */
+#define TIF_FREEZE 19 /* is freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
+#define _TIF_IRET (1<<TIF_IRET)
+#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU (1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_THREAD_INFO_H */
--- /dev/null
+#ifndef _ASM_M32R_TIMEX_H
+#define _ASM_M32R_TIMEX_H
+
+/*
+ * linux/include/asm-m32r/timex.h
+ *
+ * m32r architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE (CONFIG_BUS_CLOCK / CONFIG_TIMER_DIVIDE)
+#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
+
+#ifdef __KERNEL__
+/*
+ * Standard way to access the cycle counter.
+ * Currently only used on SMP.
+ */
+
+typedef unsigned long long cycles_t;
+
+static __inline__ cycles_t get_cycles (void)
+{
+ return 0;
+}
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_TIMEX_H */
--- /dev/null
+#ifndef _M32R_TLB_H
+#define _M32R_TLB_H
+
+/*
+ * x86 doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _M32R_TLB_H */
--- /dev/null
+#ifndef _ASM_M32R_TLBFLUSH_H
+#define _ASM_M32R_TLBFLUSH_H
+
+#include <asm/m32r.h>
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb() flushes the current mm struct TLBs
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *);
+extern void local_flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void local_flush_tlb_range(struct vm_area_struct *, unsigned long,
+ unsigned long);
+
+#ifndef CONFIG_SMP
+#ifdef CONFIG_MMU
+#define flush_tlb_all() local_flush_tlb_all()
+#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
+#define flush_tlb_range(vma, start, end) \
+ local_flush_tlb_range(vma, start, end)
+#define flush_tlb_kernel_range(start, end) local_flush_tlb_all()
+#else /* CONFIG_MMU */
+#define flush_tlb_all() do { } while (0)
+#define flush_tlb_mm(mm) do { } while (0)
+#define flush_tlb_page(vma, vmaddr) do { } while (0)
+#define flush_tlb_range(vma, start, end) do { } while (0)
+#endif /* CONFIG_MMU */
+#else /* CONFIG_SMP */
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *);
+extern void smp_flush_tlb_page(struct vm_area_struct *, unsigned long);
+extern void smp_flush_tlb_range(struct vm_area_struct *, unsigned long,
+ unsigned long);
+
+#define flush_tlb_all() smp_flush_tlb_all()
+#define flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page) smp_flush_tlb_page(vma, page)
+#define flush_tlb_range(vma, start, end) \
+ smp_flush_tlb_range(vma, start, end)
+#define flush_tlb_kernel_range(start, end) smp_flush_tlb_all()
+#endif /* CONFIG_SMP */
+
+static __inline__ void __flush_tlb_page(unsigned long page)
+{
+ unsigned int tmpreg0, tmpreg1, tmpreg2;
+
+ __asm__ __volatile__ (
+ "seth %0, #high(%4) \n\t"
+ "st %3, @(%5, %0) \n\t"
+ "ldi %1, #1 \n\t"
+ "st %1, @(%6, %0) \n\t"
+ "add3 %1, %0, %7 \n\t"
+ ".fillinsn \n"
+ "1: \n\t"
+ "ld %2, @(%6, %0) \n\t"
+ "bnez %2, 1b \n\t"
+ "ld %0, @%1+ \n\t"
+ "ld %1, @%1 \n\t"
+ "st %2, @+%0 \n\t"
+ "st %2, @+%1 \n\t"
+ : "=&r" (tmpreg0), "=&r" (tmpreg1), "=&r" (tmpreg2)
+ : "r" (page), "i" (MMU_REG_BASE), "i" (MSVA_offset),
+ "i" (MTOP_offset), "i" (MIDXI_offset)
+ : "memory"
+ );
+}
+
+static __inline__ void __flush_tlb_all(void)
+{
+ unsigned int tmpreg0, tmpreg1;
+
+ __asm__ __volatile__ (
+ "seth %0, #high(%2) \n\t"
+ "or3 %0, %0, #low(%2) \n\t"
+ "ldi %1, #0xc \n\t"
+ "st %1, @%0 \n\t"
+ ".fillinsn \n"
+ "1: \n\t"
+ "ld %1, @%0 \n\t"
+ "bnez %1, 1b \n\t"
+ : "=&r" (tmpreg0), "=&r" (tmpreg1)
+ : "i" (MTOP) : "memory"
+ );
+}
+
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* _ASM_M32R_TLBFLUSH_H */
--- /dev/null
+#ifndef _ASM_M32R_TOPOLOGY_H
+#define _ASM_M32R_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M32R_TOPOLOGY_H */
--- /dev/null
+#ifndef _ASM_M32R_TYPES_H
+#define _ASM_M32R_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* DMA addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_M32R_TYPES_H */
--- /dev/null
+#ifndef _ASM_M32R_UACCESS_H
+#define _ASM_M32R_UACCESS_H
+
+/*
+ * linux/include/asm-m32r/uaccess.h
+ *
+ * M32R version.
+ * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
+ */
+
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#ifdef CONFIG_MMU
+
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#else /* not CONFIG_MMU */
+
+#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define USER_DS MAKE_MM_SEG(0xFFFFFFFF)
+#define get_ds() (KERNEL_DS)
+
+static inline mm_segment_t get_fs(void)
+{
+ return USER_DS;
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+}
+
+#endif /* not CONFIG_MMU */
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
+ *
+ * This needs 33-bit arithmetic. We have a carry...
+ */
+#define __range_ok(addr,size) ({ \
+ unsigned long flag, roksum; \
+ __chk_user_ptr(addr); \
+ asm ( \
+ " cmpu %1, %1 ; clear cbit\n" \
+ " addx %1, %3 ; set cbit if overflow\n" \
+ " subx %0, %0\n" \
+ " cmpu %4, %1\n" \
+ " subx %0, %5\n" \
+ : "=&r" (flag), "=r" (roksum) \
+ : "1" (addr), "r" ((int)(size)), \
+ "r" (current_thread_info()->addr_limit.seg), "r" (0) \
+ : "cbit" ); \
+ flag; })
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#ifdef CONFIG_MMU
+#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
+#else
+static inline int access_ok(int type, const void *addr, unsigned long size)
+{
+ unsigned long val = (unsigned long)addr;
+
+ return ((val >= memory_start) && ((val + size) < memory_end));
+}
+#endif /* CONFIG_MMU */
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the uglyness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+/* Careful: we have to cast the result to the type of the pointer for sign
+ reasons */
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+ __get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr) \
+ __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+ __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+#define __get_user_nocheck(x,ptr,size) \
+({ \
+ long __gu_err = 0; \
+ unsigned long __gu_val; \
+ might_sleep(); \
+ __get_user_size(__gu_val,(ptr),(size),__gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x,ptr,size) \
+({ \
+ long __gu_err = -EFAULT; \
+ unsigned long __gu_val = 0; \
+ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
+ might_sleep(); \
+ if (access_ok(VERIFY_READ,__gu_addr,size)) \
+ __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \
+ (x) = (__typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+extern long __get_user_bad(void);
+
+#define __get_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: __get_user_asm(x,ptr,retval,"ub"); break; \
+ case 2: __get_user_asm(x,ptr,retval,"uh"); break; \
+ case 4: __get_user_asm(x,ptr,retval,""); break; \
+ default: (x) = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype) \
+ __asm__ __volatile__( \
+ " .fillinsn\n" \
+ "1: ld"itype" %1,@%2\n" \
+ " .fillinsn\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "3: ldi %0,%3\n" \
+ " seth r14,#high(2b)\n" \
+ " or3 r14,r14,#low(2b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=&r" (err), "=&r" (x) \
+ : "r" (addr), "i" (-EFAULT), "0" (err) \
+ : "r14", "memory")
+
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+
+
+#define __put_user_nocheck(x,ptr,size) \
+({ \
+ long __pu_err; \
+ might_sleep(); \
+ __put_user_size((x),(ptr),(size),__pu_err); \
+ __pu_err; \
+})
+
+
+#define __put_user_check(x,ptr,size) \
+({ \
+ long __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ might_sleep(); \
+ if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
+ __put_user_size((x),__pu_addr,(size),__pu_err); \
+ __pu_err; \
+})
+
+#if defined(__LITTLE_ENDIAN__)
+#define __put_user_u64(x, addr, err) \
+ __asm__ __volatile__( \
+ " .fillinsn\n" \
+ "1: st %L1,@%2\n" \
+ " .fillinsn\n" \
+ "2: st %H1,@(4,%2)\n" \
+ " .fillinsn\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "4: ldi %0,%3\n" \
+ " seth r14,#high(3b)\n" \
+ " or3 r14,r14,#low(3b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=&r" (err) \
+ : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
+ : "r14", "memory")
+
+#elif defined(__BIG_ENDIAN__)
+#define __put_user_u64(x, addr, err) \
+ __asm__ __volatile__( \
+ " .fillinsn\n" \
+ "1: st %H1,@%2\n" \
+ " .fillinsn\n" \
+ "2: st %L1,@(4,%2)\n" \
+ " .fillinsn\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "4: ldi %0,%3\n" \
+ " seth r14,#high(3b)\n" \
+ " or3 r14,r14,#low(3b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b,4b\n" \
+ " .long 2b,4b\n" \
+ ".previous" \
+ : "=&r" (err) \
+ : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
+ : "r14", "memory")
+#else
+#error no endian defined
+#endif
+
+extern void __put_user_bad(void);
+
+#define __put_user_size(x,ptr,size,retval) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: __put_user_asm(x,ptr,retval,"b"); break; \
+ case 2: __put_user_asm(x,ptr,retval,"h"); break; \
+ case 4: __put_user_asm(x,ptr,retval,""); break; \
+ case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
+ default: __put_user_bad(); \
+ } \
+} while (0)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype) \
+ __asm__ __volatile__( \
+ " .fillinsn\n" \
+ "1: st"itype" %1,@%2\n" \
+ " .fillinsn\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "3: ldi %0,%3\n" \
+ " seth r14,#high(2b)\n" \
+ " or3 r14,r14,#low(2b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : "=&r" (err) \
+ : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
+ : "r14", "memory")
+
+/*
+ * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault
+ * we return the initial request size (1, 2 or 4), as copy_*_user should do.
+ * If a store crosses a page boundary and gets a fault, the m32r will not write
+ * anything, so this is accurate.
+ */
+
+/*
+ * Copy To/From Userspace
+ */
+
+/* Generic arbitrary sized copy. */
+/* Return the number of bytes NOT copied. */
+#define __copy_user(to,from,size) \
+do { \
+ unsigned long __dst, __src, __c; \
+ __asm__ __volatile__ ( \
+ " mv r14, %0\n" \
+ " or r14, %1\n" \
+ " beq %0, %1, 9f\n" \
+ " beqz %2, 9f\n" \
+ " and3 r14, r14, #3\n" \
+ " bnez r14, 2f\n" \
+ " and3 %2, %2, #3\n" \
+ " beqz %3, 2f\n" \
+ " addi %0, #-4 ; word_copy \n" \
+ " .fillinsn\n" \
+ "0: ld r14, @%1+\n" \
+ " addi %3, #-1\n" \
+ " .fillinsn\n" \
+ "1: st r14, @+%0\n" \
+ " bnez %3, 0b\n" \
+ " beqz %2, 9f\n" \
+ " addi %0, #4\n" \
+ " .fillinsn\n" \
+ "2: ldb r14, @%1 ; byte_copy \n" \
+ " .fillinsn\n" \
+ "3: stb r14, @%0\n" \
+ " addi %1, #1\n" \
+ " addi %2, #-1\n" \
+ " addi %0, #1\n" \
+ " bnez %2, 2b\n" \
+ " .fillinsn\n" \
+ "9:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "5: addi %3, #1\n" \
+ " addi %1, #-4\n" \
+ " .fillinsn\n" \
+ "6: slli %3, #2\n" \
+ " add %2, %3\n" \
+ " addi %0, #4\n" \
+ " .fillinsn\n" \
+ "7: seth r14, #high(9b)\n" \
+ " or3 r14, r14, #low(9b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,6b\n" \
+ " .long 1b,5b\n" \
+ " .long 2b,9b\n" \
+ " .long 3b,9b\n" \
+ ".previous\n" \
+ : "=&r" (__dst), "=&r" (__src), "=&r" (size), \
+ "=&r" (__c) \
+ : "0" (to), "1" (from), "2" (size), "3" (size / 4) \
+ : "r14", "memory"); \
+} while (0)
+
+#define __copy_user_zeroing(to,from,size) \
+do { \
+ unsigned long __dst, __src, __c; \
+ __asm__ __volatile__ ( \
+ " mv r14, %0\n" \
+ " or r14, %1\n" \
+ " beq %0, %1, 9f\n" \
+ " beqz %2, 9f\n" \
+ " and3 r14, r14, #3\n" \
+ " bnez r14, 2f\n" \
+ " and3 %2, %2, #3\n" \
+ " beqz %3, 2f\n" \
+ " addi %0, #-4 ; word_copy \n" \
+ " .fillinsn\n" \
+ "0: ld r14, @%1+\n" \
+ " addi %3, #-1\n" \
+ " .fillinsn\n" \
+ "1: st r14, @+%0\n" \
+ " bnez %3, 0b\n" \
+ " beqz %2, 9f\n" \
+ " addi %0, #4\n" \
+ " .fillinsn\n" \
+ "2: ldb r14, @%1 ; byte_copy \n" \
+ " .fillinsn\n" \
+ "3: stb r14, @%0\n" \
+ " addi %1, #1\n" \
+ " addi %2, #-1\n" \
+ " addi %0, #1\n" \
+ " bnez %2, 2b\n" \
+ " .fillinsn\n" \
+ "9:\n" \
+ ".section .fixup,\"ax\"\n" \
+ " .balign 4\n" \
+ "5: addi %3, #1\n" \
+ " addi %1, #-4\n" \
+ " .fillinsn\n" \
+ "6: slli %3, #2\n" \
+ " add %2, %3\n" \
+ " addi %0, #4\n" \
+ " .fillinsn\n" \
+ "7: ldi r14, #0 ; store zero \n" \
+ " .fillinsn\n" \
+ "8: addi %2, #-1\n" \
+ " stb r14, @%0 ; ACE? \n" \
+ " addi %0, #1\n" \
+ " bnez %2, 8b\n" \
+ " seth r14, #high(9b)\n" \
+ " or3 r14, r14, #low(9b)\n" \
+ " jmp r14\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,6b\n" \
+ " .long 1b,5b\n" \
+ " .long 2b,7b\n" \
+ " .long 3b,7b\n" \
+ ".previous\n" \
+ : "=&r" (__dst), "=&r" (__src), "=&r" (size), \
+ "=&r" (__c) \
+ : "0" (to), "1" (from), "2" (size), "3" (size / 4) \
+ : "r14", "memory"); \
+} while (0)
+
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline unsigned long __generic_copy_from_user_nocheck(void *to,
+ const void __user *from, unsigned long n)
+{
+ __copy_user_zeroing(to,from,n);
+ return n;
+}
+
+static inline unsigned long __generic_copy_to_user_nocheck(void __user *to,
+ const void *from, unsigned long n)
+{
+ __copy_user(to,from,n);
+ return n;
+}
+
+unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long);
+unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long);
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from kernel space to user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define __copy_to_user(to,from,n) \
+ __generic_copy_to_user_nocheck((to),(from),(n))
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+#define copy_to_user(to,from,n) \
+({ \
+ might_sleep(); \
+ __generic_copy_to_user((to),(from),(n)); \
+})
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to kernel space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define __copy_from_user(to,from,n) \
+ __generic_copy_from_user_nocheck((to),(from),(n))
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to: Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+#define copy_from_user(to,from,n) \
+({ \
+ might_sleep(); \
+ __generic_copy_from_user((to),(from),(n)); \
+})
+
+long __must_check strncpy_from_user(char *dst, const char __user *src,
+ long count);
+long __must_check __strncpy_from_user(char *dst,
+ const char __user *src, long count);
+
+/**
+ * __clear_user: - Zero a block of memory in user space, with less checking.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long __clear_user(void __user *mem, unsigned long len);
+
+/**
+ * clear_user: - Zero a block of memory in user space.
+ * @to: Destination address, in user space.
+ * @n: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+unsigned long clear_user(void __user *mem, unsigned long len);
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+long strnlen_user(const char __user *str, long n);
+
+#endif /* _ASM_M32R_UACCESS_H */
--- /dev/null
+#ifndef _ASM_M32R_UCONTEXT_H
+#define _ASM_M32R_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_M32R_UCONTEXT_H */
--- /dev/null
+#ifndef _ASM_M32R_UNALIGNED_H
+#define _ASM_M32R_UNALIGNED_H
+
+#if defined(__LITTLE_ENDIAN__)
+# include <linux/unaligned/le_memmove.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned __get_unaligned_le
+# define put_unaligned __put_unaligned_le
+#else
+# include <linux/unaligned/be_memmove.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned __get_unaligned_be
+# define put_unaligned __put_unaligned_be
+#endif
+
+#endif /* _ASM_M32R_UNALIGNED_H */
--- /dev/null
+#ifndef _ASM_M32R_UNISTD_H
+#define _ASM_M32R_UNISTD_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+/* 16 is unused */
+/* 17 is unused */
+/* 18 is unused */
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+/* 23 is unused */
+/* 24 is unused */
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+/* 28 is unused */
+#define __NR_pause 29
+#define __NR_utime 30
+/* 31 is unused */
+#define __NR_cachectl 32 /* old #define __NR_gtty 32*/
+#define __NR_access 33
+/* 34 is unused */
+/* 35 is unused */
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+/* 44 is unused */
+#define __NR_brk 45
+/* 46 is unused */
+/* 47 is unused (getgid16) */
+/* 48 is unused */
+/* 49 is unused */
+/* 50 is unused */
+#define __NR_acct 51
+#define __NR_umount2 52
+/* 53 is unused */
+#define __NR_ioctl 54
+/* 55 is unused (fcntl) */
+/* 56 is unused */
+#define __NR_setpgid 57
+/* 58 is unused */
+/* 59 is unused */
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+/* 67 is unused */
+/* 68 is unused*/
+/* 69 is unused*/
+/* 70 is unused */
+/* 71 is unused */
+/* 72 is unused */
+/* 73 is unused */
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+/* 76 is unused (old getrlimit) */
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+/* 80 is unused */
+/* 81 is unused */
+/* 82 is unused */
+#define __NR_symlink 83
+/* 84 is unused */
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+/* 89 is unused */
+/* 90 is unused */
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+/* 95 is unused */
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+/* 98 is unused */
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+/* 101 is unused */
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+/* 109 is unused */
+/* 110 is unused */
+#define __NR_vhangup 111
+/* 112 is unused */
+/* 113 is unused */
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+/* 119 is unused */
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+/* 123 is unused */
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+/* 126 is unused */
+/* 127 is unused */
+#define __NR_init_module 128
+#define __NR_delete_module 129
+/* 130 is unused */
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+/* 137 is unused */
+/* 138 is unused */
+/* 139 is unused */
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+/* 164 is unused */
+/* 165 is unused */
+#define __NR_tas 166
+/* 167 is unused */
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+/* 170 is unused */
+/* 171 is unused */
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+/* 182 is unused */
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+/* 188 is unused */
+/* 189 is unused */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_lchown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_chown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_mincore 218
+#define __NR_madvise 219
+#define __NR_getdents64 220
+#define __NR_fcntl64 221
+/* 222 is unused */
+/* 223 is unused */
+#define __NR_gettid 224
+#define __NR_readahead 225
+#define __NR_setxattr 226
+#define __NR_lsetxattr 227
+#define __NR_fsetxattr 228
+#define __NR_getxattr 229
+#define __NR_lgetxattr 230
+#define __NR_fgetxattr 231
+#define __NR_listxattr 232
+#define __NR_llistxattr 233
+#define __NR_flistxattr 234
+#define __NR_removexattr 235
+#define __NR_lremovexattr 236
+#define __NR_fremovexattr 237
+#define __NR_tkill 238
+#define __NR_sendfile64 239
+#define __NR_futex 240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+#define __NR_set_thread_area 243
+#define __NR_get_thread_area 244
+#define __NR_io_setup 245
+#define __NR_io_destroy 246
+#define __NR_io_getevents 247
+#define __NR_io_submit 248
+#define __NR_io_cancel 249
+#define __NR_fadvise64 250
+/* 251 is unused */
+#define __NR_exit_group 252
+#define __NR_lookup_dcookie 253
+#define __NR_epoll_create 254
+#define __NR_epoll_ctl 255
+#define __NR_epoll_wait 256
+#define __NR_remap_file_pages 257
+#define __NR_set_tid_address 258
+#define __NR_timer_create 259
+#define __NR_timer_settime (__NR_timer_create+1)
+#define __NR_timer_gettime (__NR_timer_create+2)
+#define __NR_timer_getoverrun (__NR_timer_create+3)
+#define __NR_timer_delete (__NR_timer_create+4)
+#define __NR_clock_settime (__NR_timer_create+5)
+#define __NR_clock_gettime (__NR_timer_create+6)
+#define __NR_clock_getres (__NR_timer_create+7)
+#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_statfs64 268
+#define __NR_fstatfs64 269
+#define __NR_tgkill 270
+#define __NR_utimes 271
+#define __NR_fadvise64_64 272
+#define __NR_vserver 273
+#define __NR_mbind 274
+#define __NR_get_mempolicy 275
+#define __NR_set_mempolicy 276
+#define __NR_mq_open 277
+#define __NR_mq_unlink (__NR_mq_open+1)
+#define __NR_mq_timedsend (__NR_mq_open+2)
+#define __NR_mq_timedreceive (__NR_mq_open+3)
+#define __NR_mq_notify (__NR_mq_open+4)
+#define __NR_mq_getsetattr (__NR_mq_open+5)
+#define __NR_kexec_load 283
+#define __NR_waitid 284
+/* 285 is unused */
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
+#define __NR_inotify_init 291
+#define __NR_inotify_add_watch 292
+#define __NR_inotify_rm_watch 293
+#define __NR_migrate_pages 294
+#define __NR_openat 295
+#define __NR_mkdirat 296
+#define __NR_mknodat 297
+#define __NR_fchownat 298
+#define __NR_futimesat 299
+#define __NR_fstatat64 300
+#define __NR_unlinkat 301
+#define __NR_renameat 302
+#define __NR_linkat 303
+#define __NR_symlinkat 304
+#define __NR_readlinkat 305
+#define __NR_fchmodat 306
+#define __NR_faccessat 307
+#define __NR_pselect6 308
+#define __NR_ppoll 309
+#define __NR_unshare 310
+#define __NR_set_robust_list 311
+#define __NR_get_robust_list 312
+#define __NR_splice 313
+#define __NR_sync_file_range 314
+#define __NR_tee 315
+#define __NR_vmsplice 316
+#define __NR_move_pages 317
+#define __NR_getcpu 318
+#define __NR_epoll_pwait 319
+#define __NR_utimensat 320
+#define __NR_signalfd 321
+/* #define __NR_timerfd 322 removed */
+#define __NR_eventfd 323
+#define __NR_fallocate 324
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 325
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#define __IGNORE_lchown
+#define __IGNORE_setuid
+#define __IGNORE_getuid
+#define __IGNORE_setgid
+#define __IGNORE_getgid
+#define __IGNORE_geteuid
+#define __IGNORE_getegid
+#define __IGNORE_fcntl
+#define __IGNORE_setreuid
+#define __IGNORE_setregid
+#define __IGNORE_getrlimit
+#define __IGNORE_getgroups
+#define __IGNORE_setgroups
+#define __IGNORE_select
+#define __IGNORE_mmap
+#define __IGNORE_fchown
+#define __IGNORE_setfsuid
+#define __IGNORE_setfsgid
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+#define __IGNORE_chown
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M32R_UNISTD_H */
--- /dev/null
+#ifndef _ASM_M32R_USER_H
+#define _ASM_M32R_USER_H
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).
+ *
+ * The actual file contents are as follows:
+ * UPAGE: 1 page consisting of a user struct that tells gdb
+ * what is present in the file. Directly after this is a
+ * copy of the task_struct, which is currently not used by gdb,
+ * but it may come in handy at some point. All of the registers
+ * are stored as part of the upage. The upage should always be
+ * only one page.
+ * DATA: The data area is stored. We use current->end_text to
+ * current->brk to pick up all of the user variables, plus any memory
+ * that may have been sbrk'ed. No attempt is made to determine if a
+ * page is demand-zero or if a page is totally unused, we just cover
+ * the entire range. All of the addresses are rounded in such a way
+ * that an integral number of pages is written.
+ * STACK: We need the stack information in order to get a meaningful
+ * backtrace. We need to write the data from usp to
+ * current->start_stack, so we round each of these off in order to be
+ * able to write an integer number of pages.
+ */
+
+struct user {
+ struct pt_regs regs; /* entire machine state */
+ size_t u_tsize; /* text size (pages) */
+ size_t u_dsize; /* data size (pages) */
+ size_t u_ssize; /* stack size (pages) */
+ unsigned long start_code; /* text starting address */
+ unsigned long start_data; /* data starting address */
+ unsigned long start_stack; /* stack starting address */
+ long int signal; /* signal causing core dump */
+ unsigned long u_ar0; /* help gdb find registers */
+ unsigned long magic; /* identifies a core file */
+ char u_comm[32]; /* user command name */
+};
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_DATA_START_ADDR (u.start_data)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_M32R_USER_H */
--- /dev/null
+#ifndef _ASM_M32R_VGA_H
+#define _ASM_M32R_VGA_H
+
+/*
+ * Access to VGA videoram
+ *
+ * (c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+/*
+ * On the PC, we can just recalculate addresses and then
+ * access the videoram directly without any black magic.
+ */
+
+#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x)
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif /* _ASM_M32R_VGA_H */
--- /dev/null
+#ifndef _ASM_M32R_XOR_H
+#define _ASM_M32R_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif /* _ASM_M32R_XOR_H */
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_MODULES) += module.o
-
-EXTRA_AFLAGS := -traditional
/*
* References to members of the boot_cpu_data structure.
*/
-.section .text.head, "ax"
+__HEAD
.global start_kernel
.global __bss_start
.global _end
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:42 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:52 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
#
# Serial drivers
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
+CONFIG_SERIAL_CONSOLE=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:43 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:54 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:44 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:56 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_ATARI_KBD_CORE=y
CONFIG_KEYBOARD_ATARI=y
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
+CONFIG_SERIAL_CONSOLE=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:45 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:59 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_BVME6000_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:46 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:01 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_HPLANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:47 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:03 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_SWIM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_MACSONIC=m
CONFIG_MACMACE=y
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:48 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:06 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_SWIM=y
CONFIG_AMIGA_Z2RAM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
CONFIG_BLK_DEV_FALCON_IDE=y
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
+CONFIG_MAC89x0=y
+CONFIG_MACSONIC=y
CONFIG_MACMACE=y
CONFIG_MVME147_NET=y
CONFIG_MVME16x_NET=y
CONFIG_BVME6000_NET=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
CONFIG_SUN3LANCE=y
CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_KEYBOARD_HIL_OLD=y
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_AMIGA=m
CONFIG_MOUSE_ATARI=m
# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
+CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=m
+CONFIG_HP_SDC_RTC=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=m
+CONFIG_SERIO_Q40KBD=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
#
# Serial drivers
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:50 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:08 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MVME147_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:51 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:10 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MVME16x_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:52 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:13 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:53 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:16 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
CONFIG_SUN3_82586=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:54 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:20 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#define __NR_dup3 326
#define __NR_pipe2 327
#define __NR_inotify_init1 328
+#define __NR_preadv 329
+#define __NR_pwritev 330
#ifdef __KERNEL__
-#define NR_syscalls 329
+#define NR_syscalls 331
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 330 */
#endif
.endm
-.section ".text.head","ax"
+__HEAD
ENTRY(_stext)
/*
* Version numbers of the bootinfo interface
#include <linux/linkage.h>
+#include <linux/init.h>
#include <asm/entry.h>
#include <asm/page.h>
.globl kernel_pg_dir
.equ kernel_pg_dir,kernel_pmd_table
- .section .text.head
+ __HEAD
ENTRY(_stext)
ENTRY(_start)
. = 0x1000;
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
. = 0xE002000;
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
config NO_DMA
bool
+ depends on !COLDFIRE
default y
config FPU
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# RAM/ROM/Flash chip drivers
#
-CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=115200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
# Security options
#
# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:32:41 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:17:30 2009
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_NO_IOPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+CONFIG_M5272=y
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+# CONFIG_UC5272 is not set
+CONFIG_M5272C3=y
+# CONFIG_COBRA5272 is not set
+# CONFIG_CANCam is not set
+# CONFIG_SCALES is not set
+# CONFIG_NETtel is not set
+# CONFIG_CPU16B is not set
+# CONFIG_MOD5272 is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 23:29:01 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC=y
CONFIG_FEC2=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_ARN5307 is not set
CONFIG_M5307C3=y
-# CONFIG_eLIA is not set
# CONFIG_SECUREEDGEMP3 is not set
# CONFIG_CLEOPATRA is not set
# CONFIG_NETtel is not set
CONFIG_FREESCALE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_HZ=100
#
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Wed May 7 10:25:16 2008
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 09:21:40 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* offsets into the irq_cpustat_t struct */
DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
#endif
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* signal defines */
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(SEGV_MAPERR, SEGV_MAPERR);
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/string.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <asm/cacheflush.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
free_pages((unsigned long)vaddr, get_order(size));
}
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
{
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ flush_dcache_range(handle, size);
+ break;
+ case DMA_FROM_DEVICE:
+ /* Should be clear already */
+ break;
+ default:
+ if (printk_ratelimit())
+ printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
+ break;
+ }
+}
+
+EXPORT_SYMBOL(dma_sync_single_for_device);
+dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = virt_to_phys(addr);
+ flush_dcache_range(handle, size);
+ return handle;
}
+EXPORT_SYMBOL(dma_map_single);
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = page_to_phys(page) + offset;
+ dma_sync_single_for_device(dev, handle, size, dir);
+ return handle;
+}
+EXPORT_SYMBOL(dma_map_page);
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 330 */
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
. = ALIGN(4);
_sdata = . ;
DATA_DATA
+ . = ALIGN(32);
+ *(.data.cacheline_aligned)
. = ALIGN(8192) ;
*(.data.init_task)
_edata = . ;
m527x_fec_irq_init(0);
/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+ v = readb(MCF_IPSBAR + 0x100047);
+ writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
par = readw(MCF_IPSBAR + 0x100082);
writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+#endif
#ifdef CONFIG_FEC2
m527x_fec_irq_init(1);
/***************************************************************************/
-static cycle_t m68328_read_clk(void)
+static cycle_t m68328_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
#define DMA_DTMR_CLK_DIV_16 (2 << 1)
#define DMA_DTMR_ENABLE (1 << 0)
-static cycle_t cf_dt_get_cycles(void)
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
{
return __raw_readl(DTCN0);
}
/***************************************************************************/
-static cycle_t pit_read_clk(void)
+static cycle_t pit_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
/***************************************************************************/
-static cycle_t mcftmr_read_clk(void)
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
--- /dev/null
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+mainmenu "Linux/Microblaze Kernel Configuration"
+
+config MICROBLAZE
+ def_bool y
+ select HAVE_LMB
+
+config SWAP
+ def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ def_bool n
+
+config ARCH_HAS_ILOG2_U64
+ def_bool n
+
+config GENERIC_FIND_NEXT_BIT
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_HARDIRQS
+ def_bool y
+
+config GENERIC_IRQ_PROBE
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_TIME_VSYSCALL
+ def_bool n
+
+config GENERIC_CLOCKEVENTS
+ def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
+config PCI
+ depends on !MMU
+ def_bool n
+
+config NO_DMA
+ depends on !MMU
+ def_bool n
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+source "arch/microblaze/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+source kernel/time/Kconfig
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.hz"
+
+config MMU
+ def_bool n
+
+config NO_MMU
+ bool
+ depends on !MMU
+ default y
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+
+config CMDLINE
+ string "Default kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttyUL0,115200"
+ help
+ On some architectures there is currently no way for the boot loader
+ to pass arguments to the kernel. For these architectures, you should
+ supply some command-line options at build time by entering them
+ here.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ depends on CMDLINE_BOOL
+ default n
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+config OF
+ def_bool y
+
+config OF_DEVICE
+ def_bool y
+
+config PROC_DEVICETREE
+ bool "Support for device tree in /proc"
+ depends on PROC_FS
+ help
+ This option adds a device-tree directory under /proc which contains
+ an image of the device tree that the kernel copies from Open
+ Firmware or other boot firmware. If unsure, say Y here.
+
+endmenu
+
+source "mm/Kconfig"
+
+menu "Exectuable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/microblaze/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
--- /dev/null
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ bool "Early printk function for kernel"
+ default n
+ help
+ This option turns on/off early printk messages to console.
+ First Uartlite node is taken.
+
+config HEART_BEAT
+ bool "Heart beat function for kernel"
+ default n
+ help
+ This option turns on/off heart beat kernel functionality.
+ First GPIO node is taken.
+
+config DEBUG_BOOTMEM
+ depends on DEBUG_KERNEL
+ bool "Debug BOOTMEM initialization"
+
+endmenu
--- /dev/null
+UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
+
+# What CPU vesion are we building for, and crack it open
+# as major.minor.rev
+CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
+CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+
+export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
+
+# Use cpu-related CONFIG_ vars to set compile options.
+
+# Work out HW multipler support. This is icky.
+# 1. Spartan2 has no HW multiplers.
+# 2. MicroBlaze v3.x always uses them, except in Spartan 2
+# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
+ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
+ ifeq ($(CPU_MAJOR),3)
+ CPUFLAGS-1 += -mno-xl-soft-mul
+ else
+ # USE_HW_MUL can be 0, 1, or 2, defining a heirarchy of HW Mul support.
+ CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
+ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
+ endif
+endif
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
+
+CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
+
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
+
+# r31 holds current when in kernel mode
+CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+
+LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
+
+LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/ $(LIBGCC)
+core-y += arch/microblaze/kernel/ arch/microblaze/mm/ \
+ arch/microblaze/platform/
+
+boot := arch/$(ARCH)/boot
+
+# defines filename extension depending memory management type
+ifeq ($(CONFIG_MMU),)
+MMUEXT := -nommu
+endif
+export MMUEXT
+
+all: linux.bin
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(boot)
+
+linux.bin linux.bin.gz: vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+
+define archhelp
+ echo '* linux.bin - Create raw binary'
+ echo ' linux.bin.gz - Create compressed raw binary'
+endef
--- /dev/null
+#
+# arch/microblaze/boot/Makefile
+#
+
+targets := linux.bin linux.bin.gz
+
+OBJCOPYFLAGS_linux.bin := -O binary
+
+$(obj)/linux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+ @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+$(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
+ $(call if_changed,gzip)
+ @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+clean-kernel += linux.bin linux.bin.gz
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
+#
+CONFIG_MICROBLAZE=y
+# CONFIG_SWAP is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+# CONFIG_GENERIC_TIME_VSYSCALL is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_PCI is not set
+# CONFIG_NO_DMA is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform options
+#
+CONFIG_PLATFORM_GENERIC=y
+# CONFIG_SELFMOD is not set
+# CONFIG_OPT_LIB_FUNCTION is not set
+# CONFIG_ALLOW_EDIT_AUTO is not set
+CONFIG_KERNEL_BASE_ADDR=0x90000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
+CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
+CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
+
+#
+# Processor type and features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_MMU is not set
+CONFIG_NO_MMU=y
+
+#
+# Boot options
+#
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyUL0,115200"
+# CONFIG_CMDLINE_FORCE is not set
+CONFIG_OF=y
+CONFIG_OF_DEVICE=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
+
+#
+# Exectuable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+CONFIG_DEBUG_OBJECTS_SELFTEST=y
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_NOMMU_REGIONS is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_HEART_BEAT=y
+# CONFIG_DEBUG_BOOTMEM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
--- /dev/null
+include include/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += errno.h
+header-y += fcntl.h
+header-y += ioctl.h
+header-y += ioctls.h
+header-y += ipcbuf.h
+header-y += linkage.h
+header-y += msgbuf.h
+header-y += poll.h
+header-y += resource.h
+header-y += sembuf.h
+header-y += shmbuf.h
+header-y += sigcontext.h
+header-y += siginfo.h
+header-y += socket.h
+header-y += sockios.h
+header-y += statfs.h
+header-y += stat.h
+header-y += termbits.h
+header-y += ucontext.h
+
+unifdef-y += cputable.h
+unifdef-y += elf.h
+unifdef-y += termios.h
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_ATOMIC_H
+#define _ASM_MICROBLAZE_ATOMIC_H
+
+#include <linux/types.h>
+#include <linux/compiler.h> /* likely */
+#include <asm/system.h> /* local_irq_XXX and friends */
+
+#define ATOMIC_INIT(i) { (i) }
+#define atomic_read(v) ((v)->counter)
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#define atomic_inc(v) (atomic_add_return(1, (v)))
+#define atomic_dec(v) (atomic_sub_return(1, (v)))
+
+#define atomic_add(i, v) (atomic_add_return(i, (v)))
+#define atomic_sub(i, v) (atomic_sub_return(i, (v)))
+
+#define atomic_inc_return(v) (atomic_add_return(1, (v)))
+#define atomic_dec_return(v) (atomic_sub_return(1, (v)))
+
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc_not_zero(v) (atomic_add_unless((v), 1, 0))
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+ int ret;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ ret = v->counter;
+ if (likely(ret == old))
+ v->counter = new;
+ local_irq_restore(flags);
+
+ return ret;
+}
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ int c, old;
+
+ c = atomic_read(v);
+ while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+ c = old;
+ return c != u;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ *addr &= ~mask;
+ local_irq_restore(flags);
+}
+
+/**
+ * atomic_add_return - add and return
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int val;
+
+ local_irq_save(flags);
+ val = v->counter;
+ v->counter = val += i;
+ local_irq_restore(flags);
+
+ return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ return atomic_add_return(-i, v);
+}
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static inline int atomic_dec_if_positive(atomic_t *v)
+{
+ unsigned long flags;
+ int res;
+
+ local_irq_save(flags);
+ res = v->counter - 1;
+ if (res >= 0)
+ v->counter = res;
+ local_irq_restore(flags);
+
+ return res;
+}
+
+#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0)
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* _ASM_MICROBLAZE_ATOMIC_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_BITOPS_H
+#define _ASM_MICROBLAZE_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <asm/byteorder.h> /* swab32 */
+#include <asm/system.h> /* save_flags */
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+#include <asm-generic/bitops.h>
+#include <asm-generic/bitops/__fls.h>
+
+#endif /* _ASM_MICROBLAZE_BITOPS_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_BUG_H
+#define _ASM_MICROBLAZE_BUG_H
+
+#include <linux/kernel.h>
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_MICROBLAZE_BUG_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_BUGS_H
+#define _ASM_MICROBLAZE_BUGS_H
+
+static inline void check_bugs(void)
+{
+ /* nothing to do */
+}
+
+#endif /* _ASM_MICROBLAZE_BUGS_H */
--- /dev/null
+#ifndef _ASM_MICROBLAZE_BYTEORDER_H
+#define _ASM_MICROBLAZE_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_MICROBLAZE_BYTEORDER_H */
--- /dev/null
+/*
+ * Cache operations
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2003 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHE_H
+#define _ASM_MICROBLAZE_CACHE_H
+
+#include <asm/registers.h>
+
+#define L1_CACHE_SHIFT 2
+/* word-granular cache in microblaze */
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+#define SMP_CACHE_BYTES L1_CACHE_BYTES
+
+void _enable_icache(void);
+void _disable_icache(void);
+void _invalidate_icache(unsigned int addr);
+
+#define __enable_icache() _enable_icache()
+#define __disable_icache() _disable_icache()
+#define __invalidate_icache(addr) _invalidate_icache(addr)
+
+void _enable_dcache(void);
+void _disable_dcache(void);
+void _invalidate_dcache(unsigned int addr);
+
+#define __enable_dcache() _enable_dcache()
+#define __disable_dcache() _disable_dcache()
+#define __invalidate_dcache(addr) _invalidate_dcache(addr)
+
+#endif /* _ASM_MICROBLAZE_CACHE_H */
--- /dev/null
+/*
+ * Copyright (C) 2007 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * based on v850 version which was
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ */
+
+#ifndef _ASM_MICROBLAZE_CACHEFLUSH_H
+#define _ASM_MICROBLAZE_CACHEFLUSH_H
+
+/* Somebody depends on this; sigh... */
+#include <linux/mm.h>
+
+/*
+ * Cache handling functions.
+ * Microblaze has a write-through data cache, meaning that the data cache
+ * never needs to be flushed. The only flushing operations that are
+ * implemented are to invalidate the instruction cache. These are called
+ * after loading a user application into memory, we must invalidate the
+ * instruction cache to make sure we don't fetch old, bad code.
+ */
+
+/* FIXME for LL-temac driver */
+#define invalidate_dcache_range(start, end) \
+ __invalidate_dcache_range(start, end)
+
+#define flush_cache_all() __invalidate_cache_all()
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) __invalidate_cache_all()
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+
+#define flush_dcache_range(start, end) __invalidate_dcache_range(start, end)
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+#define flush_icache_range(start, len) __invalidate_icache_range(start, len)
+#define flush_icache_page(vma, pg) do { } while (0)
+
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+
+struct page;
+struct mm_struct;
+struct vm_area_struct;
+
+/* see arch/microblaze/kernel/cache.c */
+extern void __invalidate_icache_all(void);
+extern void __invalidate_icache_range(unsigned long start, unsigned long end);
+extern void __invalidate_icache_page(struct vm_area_struct *vma,
+ struct page *page);
+extern void __invalidate_icache_user_range(struct vm_area_struct *vma,
+ struct page *page,
+ unsigned long adr, int len);
+extern void __invalidate_cache_sigtramp(unsigned long addr);
+
+extern void __invalidate_dcache_all(void);
+extern void __invalidate_dcache_range(unsigned long start, unsigned long end);
+extern void __invalidate_dcache_page(struct vm_area_struct *vma,
+ struct page *page);
+extern void __invalidate_dcache_user_range(struct vm_area_struct *vma,
+ struct page *page,
+ unsigned long adr, int len);
+
+extern inline void __invalidate_cache_all(void)
+{
+ __invalidate_icache_all();
+ __invalidate_dcache_all();
+}
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy((dst), (src), (len)); \
+ flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy((dst), (src), (len))
+
+#endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CHECKSUM_H
+#define _ASM_MICROBLAZE_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ __asm__("add %0, %0, %1\n\t"
+ "addc %0, %0, %2\n\t"
+ "addc %0, %0, %3\n\t"
+ "addc %0, %0, r0\n\t"
+ : "+&d" (sum)
+ : "d" (saddr), "d" (daddr), "d" (len + proto));
+
+ return sum;
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
+ int len, int sum, int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum) \
+ csum_partial_copy((src), (dst), (len), (sum))
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ *
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Fold a partial checksum
+ */
+static inline __sum16 csum_fold(unsigned int sum)
+{
+ sum = (sum & 0xffff) + (sum >> 16);
+ sum = (sum & 0xffff) + (sum >> 16);
+ return ~sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
+
+#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
--- /dev/null
+#include <linux/linkage.h>
--- /dev/null
+/*
+ * Generic support for queying CPU info
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CPUINFO_H
+#define _ASM_MICROBLAZE_CPUINFO_H
+
+#include <asm/prom.h>
+
+/* CPU Version and FPGA Family code conversion table type */
+struct cpu_ver_key {
+ const char *s;
+ const unsigned k;
+};
+
+extern const struct cpu_ver_key cpu_ver_lookup[];
+
+struct family_string_key {
+ const char *s;
+ const unsigned k;
+};
+
+extern const struct family_string_key family_string_lookup[];
+
+struct cpuinfo {
+ /* Core CPU configuration */
+ u32 use_instr;
+ u32 use_mult;
+ u32 use_fpu;
+ u32 use_exc;
+ u32 ver_code;
+ u32 mmu;
+
+ /* CPU caches */
+ u32 use_icache;
+ u32 icache_tagbits;
+ u32 icache_write;
+ u32 icache_line;
+ u32 icache_size;
+ unsigned long icache_base;
+ unsigned long icache_high;
+
+ u32 use_dcache;
+ u32 dcache_tagbits;
+ u32 dcache_write;
+ u32 dcache_line;
+ u32 dcache_size;
+ unsigned long dcache_base;
+ unsigned long dcache_high;
+
+ /* Bus connections */
+ u32 use_dopb;
+ u32 use_iopb;
+ u32 use_dlmb;
+ u32 use_ilmb;
+ u32 num_fsl;
+
+ /* CPU interrupt line info */
+ u32 irq_edge;
+ u32 irq_positive;
+
+ u32 area_optimised;
+
+ /* HW debug support */
+ u32 hw_debug;
+ u32 num_pc_brk;
+ u32 num_rd_brk;
+ u32 num_wr_brk;
+ u32 cpu_clock_freq; /* store real freq of cpu */
+ u32 freq_div_hz; /* store freq/HZ */
+
+ /* FPGA family */
+ u32 fpga_family_code;
+
+ /* User define */
+ u32 pvr_user1;
+ u32 pvr_user2;
+};
+
+extern struct cpuinfo cpuinfo;
+
+/* fwd declarations of the various CPUinfo populators */
+void setup_cpuinfo(void);
+
+void set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu);
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu);
+
+static inline unsigned int fcpu(struct device_node *cpu, char *n)
+{
+ int *val;
+ return (val = (int *) of_get_property(cpu, n, NULL)) ? *val : 0;
+}
+
+#endif /* _ASM_MICROBLAZE_CPUINFO_H */
--- /dev/null
+#include <asm-generic/cputime.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_CURRENT_H
+#define _ASM_MICROBLAZE_CURRENT_H
+
+# ifndef __ASSEMBLY__
+/*
+ * Dedicate r31 to keeping the current task pointer
+ */
+register struct task_struct *current asm("r31");
+
+# define get_current() current
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_CURRENT_H */
--- /dev/null
+/*
+ * include/asm-microblaze/delay.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2007 John Williams
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ */
+
+#ifndef _ASM_MICROBLAZE_DELAY_H
+#define _ASM_MICROBLAZE_DELAY_H
+
+extern inline void __delay(unsigned long loops)
+{
+ asm volatile ("# __delay \n\t" \
+ "1: addi %0, %0, -1\t\n" \
+ "bneid %0, 1b \t\n" \
+ "nop \t\n"
+ : "=r" (loops)
+ : "0" (loops));
+}
+
+/*
+ * Note that 19 * 226 == 4294 ==~ 2^32 / 10^6, so
+ * loops = (4294 * usecs * loops_per_jiffy * HZ) / 2^32.
+ *
+ * The mul instruction gives us loops = (a * b) / 2^32.
+ * We choose a = usecs * 19 * HZ and b = loops_per_jiffy * 226
+ * because this lets us support a wide range of HZ and
+ * loops_per_jiffy values without either a or b overflowing 2^32.
+ * Thus we need usecs * HZ <= (2^32 - 1) / 19 = 226050910 and
+ * loops_per_jiffy <= (2^32 - 1) / 226 = 19004280
+ * (which corresponds to ~3800 bogomips at HZ = 100).
+ * -- paulus
+ */
+#define __MAX_UDELAY (226050910UL/HZ) /* maximum udelay argument */
+#define __MAX_NDELAY (4294967295UL/HZ) /* maximum ndelay argument */
+
+extern unsigned long loops_per_jiffy;
+
+extern inline void __udelay(unsigned int x)
+{
+
+ unsigned long long tmp =
+ (unsigned long long)x * (unsigned long long)loops_per_jiffy \
+ * 226LL;
+ unsigned loops = tmp >> 32;
+
+/*
+ __asm__("mulxuu %0,%1,%2" : "=r" (loops) :
+ "r" (x), "r" (loops_per_jiffy * 226));
+*/
+ __delay(loops);
+}
+
+extern void __bad_udelay(void); /* deliberately undefined */
+extern void __bad_ndelay(void); /* deliberately undefined */
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+ ((n) > __MAX_UDELAY ? __bad_udelay() : __udelay((n) * (19 * HZ))) : \
+ __udelay((n) * (19 * HZ)))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+ ((n) > __MAX_NDELAY ? __bad_ndelay() : __udelay((n) * HZ)) : \
+ __udelay((n) * HZ))
+
+#define muldiv(a, b, c) (((a)*(b))/(c))
+
+#endif /* _ASM_MICROBLAZE_DELAY_H */
--- /dev/null
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License v2. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_DEVICE_H
+#define _ASM_MICROBLAZE_DEVICE_H
+
+struct device_node;
+
+struct dev_archdata {
+ /* Optional pointer to an OF device node */
+ struct device_node *of_node;
+};
+
+#endif /* _ASM_MICROBLAZE_DEVICE_H */
+
+
--- /dev/null
+#include <asm-generic/div64.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
+#define _ASM_MICROBLAZE_DMA_MAPPING_H
+
+#include <asm/cacheflush.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+
+struct scatterlist;
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+/* FIXME */
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG();
+ return 0;
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG();
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ BUG();
+ return 0;
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG();
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG();
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ BUG();
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG();
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG();
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int flag)
+{
+ return NULL; /* consistent_alloc(flag, size, dma_handle); */
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ BUG();
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+
+ return virt_to_bus(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ switch (direction) {
+ case DMA_FROM_DEVICE:
+ flush_dcache_range((unsigned)dma_addr,
+ (unsigned)dma_addr + size);
+ /* Fall through */
+ case DMA_TO_DEVICE:
+ break;
+ default:
+ BUG();
+ }
+}
+
+#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_DMA_H
+#define _ASM_MICROBLAZE_DMA_H
+
+/* we don't have dma address limit. define it as zero to be
+ * unlimited. */
+#define MAX_DMA_ADDRESS (0)
+
+#endif /* _ASM_MICROBLAZE_DMA_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_ELF_H
+#define _ASM_MICROBLAZE_ELF_H
+
+/*
+ * Note there is no "official" ELF designation for Microblaze.
+ * I've snaffled the value from the microblaze binutils source code
+ * /binutils/microblaze/include/elf/microblaze.h
+ */
+#define EM_XILINX_MICROBLAZE 0xbaab
+#define ELF_ARCH EM_XILINX_MICROBLAZE
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_XILINX_MICROBLAZE)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+
+#endif /* _ASM_MICROBLAZE_ELF_H */
--- /dev/null
+#include <asm-generic/emergency-restart.h>
--- /dev/null
+/*
+ * Definitions used by low-level trap handlers
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2007 - 2008 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_ENTRY_H
+#define _ASM_MICROBLAZE_ENTRY_H
+
+#include <asm/percpu.h>
+#include <asm/ptrace.h>
+
+/*
+ * These are per-cpu variables required in entry.S, among other
+ * places
+ */
+
+#define PER_CPU(var) per_cpu__##var
+
+# ifndef __ASSEMBLY__
+DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
+DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
+DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
+# endif /* __ASSEMBLY__ */
+
+/* noMMU hasn't any space for args */
+# define STATE_SAVE_ARG_SPACE (0)
+
+#endif /* _ASM_MICROBLAZE_ENTRY_H */
--- /dev/null
+#include <asm-generic/errno.h>
--- /dev/null
+/*
+ * Preliminary support for HW exception handing for Microblaze
+ *
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_EXCEPTIONS_H
+#define _ASM_MICROBLAZE_EXCEPTIONS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+/* Macros to enable and disable HW exceptions in the MSR */
+/* Define MSR enable bit for HW exceptions */
+#define HWEX_MSR_BIT (1 << 8)
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#define __enable_hw_exceptions() \
+ __asm__ __volatile__ (" msrset r0, %0; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory")
+
+#define __disable_hw_exceptions() \
+ __asm__ __volatile__ (" msrclr r0, %0; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory")
+#else /* !CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+#define __enable_hw_exceptions() \
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ ori r12, r12, %0; \
+ mts rmsr, r12; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory", "r12")
+
+#define __disable_hw_exceptions() \
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ andi r12, r12, ~%0; \
+ mts rmsr, r12; \
+ nop;" \
+ : \
+ : "i" (HWEX_MSR_BIT) \
+ : "memory", "r12")
+#endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+ int fsr, int addr);
+
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
+#if defined(CONFIG_XMON)
+extern void xmon(struct pt_regs *regs);
+extern int xmon_bpt(struct pt_regs *regs);
+extern int xmon_sstep(struct pt_regs *regs);
+extern int xmon_iabr_match(struct pt_regs *regs);
+extern int xmon_dabr_match(struct pt_regs *regs);
+extern void (*xmon_fault_handler)(struct pt_regs *regs);
+
+void (*debugger)(struct pt_regs *regs) = xmon;
+int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
+int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
+int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
+int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
+void (*debugger_fault_handler)(struct pt_regs *regs);
+#elif defined(CONFIG_KGDB)
+void (*debugger)(struct pt_regs *regs);
+int (*debugger_bpt)(struct pt_regs *regs);
+int (*debugger_sstep)(struct pt_regs *regs);
+int (*debugger_iabr_match)(struct pt_regs *regs);
+int (*debugger_dabr_match)(struct pt_regs *regs);
+void (*debugger_fault_handler)(struct pt_regs *regs);
+#else
+#define debugger(regs) do { } while (0)
+#define debugger_bpt(regs) 0
+#define debugger_sstep(regs) 0
+#define debugger_iabr_match(regs) 0
+#define debugger_dabr_match(regs) 0
+#define debugger_fault_handler ((void (*)(struct pt_regs *))0)
+#endif
+
+#endif /*__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */
--- /dev/null
+#include <asm-generic/fcntl.h>
--- /dev/null
+/*
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_FLAT_H
+#define _ASM_MICROBLAZE_FLAT_H
+
+#include <asm/unaligned.h>
+
+#define flat_stack_align(sp) /* nothing needed */
+#define flat_argvp_envp_on_stack() 0
+#define flat_old_ram_flag(flags) (flags)
+#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+#define flat_set_persistent(relval, p) 0
+
+/*
+ * Microblaze works a little differently from other arches, because
+ * of the MICROBLAZE_64 reloc type. Here, a 32 bit address is split
+ * over two instructions, an 'imm' instruction which provides the top
+ * 16 bits, then the instruction "proper" which provides the low 16
+ * bits.
+ */
+
+/*
+ * Crack open a symbol reference and extract the address to be
+ * relocated. rp is a potentially unaligned pointer to the
+ * reference
+ */
+
+static inline unsigned long
+flat_get_addr_from_rp(unsigned long *rp, unsigned long relval,
+ unsigned long flags, unsigned long *persistent)
+{
+ unsigned long addr;
+ (void)flags;
+
+ /* Is it a split 64/32 reference? */
+ if (relval & 0x80000000) {
+ /* Grab the two halves of the reference */
+ unsigned long val_hi, val_lo;
+
+ val_hi = get_unaligned(rp);
+ val_lo = get_unaligned(rp+1);
+
+ /* Crack the address out */
+ addr = ((val_hi & 0xffff) << 16) + (val_lo & 0xffff);
+ } else {
+ /* Get the address straight out */
+ addr = get_unaligned(rp);
+ }
+
+ return addr;
+}
+
+/*
+ * Insert an address into the symbol reference at rp. rp is potentially
+ * unaligned.
+ */
+
+static inline void
+flat_put_addr_at_rp(unsigned long *rp, unsigned long addr, unsigned long relval)
+{
+ /* Is this a split 64/32 reloc? */
+ if (relval & 0x80000000) {
+ /* Get the two "halves" */
+ unsigned long val_hi = get_unaligned(rp);
+ unsigned long val_lo = get_unaligned(rp + 1);
+
+ /* insert the address */
+ val_hi = (val_hi & 0xffff0000) | addr >> 16;
+ val_lo = (val_lo & 0xffff0000) | (addr & 0xffff);
+
+ /* store the two halves back into memory */
+ put_unaligned(val_hi, rp);
+ put_unaligned(val_lo, rp+1);
+ } else {
+ /* Put it straight in, no messing around */
+ put_unaligned(addr, rp);
+ }
+}
+
+#define flat_get_relocate_addr(rel) (rel & 0x7fffffff)
+
+#endif /* _ASM_MICROBLAZE_FLAT_H */
--- /dev/null
+#include <asm-generic/futex.h>
--- /dev/null
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_HARDIRQ_H
+#define _ASM_MICROBLAZE_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/current.h>
+#include <linux/ptrace.h>
+
+/* should be defined in each interrupt controller driver */
+extern unsigned int get_irq(struct pt_regs *regs);
+
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+void ack_bad_irq(unsigned int irq);
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#endif /* _ASM_MICROBLAZE_HARDIRQ_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IO_H
+#define _ASM_MICROBLAZE_IO_H
+
+#include <asm/byteorder.h>
+#include <asm/page.h>
+#include <linux/types.h>
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char __force *)addr;
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned short __force *)addr;
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned int __force *)addr;
+}
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned long __force *)addr;
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+ *(volatile unsigned char __force *)addr = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+ *(volatile unsigned short __force *)addr = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+ *(volatile unsigned int __force *)addr = v;
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+ *(volatile unsigned long __force *)addr = v;
+}
+
+/*
+ * read (readb, readw, readl, readq) and write (writeb, writew,
+ * writel, writeq) accessors are for PCI and thus littel endian.
+ * Linux 2.4 for Microblaze had this wrong.
+ */
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+ return *(volatile unsigned char __force *)addr;
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+ return le16_to_cpu(*(volatile unsigned short __force *)addr);
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+ return le32_to_cpu(*(volatile unsigned int __force *)addr);
+}
+static inline void writeb(unsigned char v, volatile void __iomem *addr)
+{
+ *(volatile unsigned char __force *)addr = v;
+}
+static inline void writew(unsigned short v, volatile void __iomem *addr)
+{
+ *(volatile unsigned short __force *)addr = cpu_to_le16(v);
+}
+static inline void writel(unsigned int v, volatile void __iomem *addr)
+{
+ *(volatile unsigned int __force *)addr = cpu_to_le32(v);
+}
+
+/* ioread and iowrite variants. thease are for now same as __raw_
+ * variants of accessors. we might check for endianess in the feature
+ */
+#define ioread8(addr) __raw_readb((u8 *)(addr))
+#define ioread16(addr) __raw_readw((u16 *)(addr))
+#define ioread32(addr) __raw_readl((u32 *)(addr))
+#define iowrite8(v, addr) __raw_writeb((u8)(v), (u8 *)(addr))
+#define iowrite16(v, addr) __raw_writew((u16)(v), (u16 *)(addr))
+#define iowrite32(v, addr) __raw_writel((u32)(v), (u32 *)(addr))
+
+/* These are the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl, the "string" versions
+ * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
+ * inb_p/inw_p/...
+ * The macros don't do byte-swapping.
+ */
+#define inb(port) readb((u8 *)((port)))
+#define outb(val, port) writeb((val), (u8 *)((unsigned long)(port)))
+#define inw(port) readw((u16 *)((port)))
+#define outw(val, port) writew((val), (u16 *)((unsigned long)(port)))
+#define inl(port) readl((u32 *)((port)))
+#define outl(val, port) writel((val), (u32 *)((unsigned long)(port)))
+
+#define inb_p(port) inb((port))
+#define outb_p(val, port) outb((val), (port))
+#define inw_p(port) inw((port))
+#define outw_p(val, port) outw((val), (port))
+#define inl_p(port) inl((port))
+#define outl_p(val, port) outl((val), (port))
+
+#define memset_io(a, b, c) memset((void *)(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
+#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
+
+/**
+ * virt_to_phys - map virtual addresses to physical
+ * @address: address to remap
+ *
+ * The returned physical address is the physical (CPU) mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses directly mapped or allocated via kmalloc.
+ *
+ * This function does not give bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+static inline unsigned long __iomem virt_to_phys(volatile void *address)
+{
+ return __pa((unsigned long)address);
+}
+
+#define virt_to_bus virt_to_phys
+
+/**
+ * phys_to_virt - map physical address to virtual
+ * @address: address to remap
+ *
+ * The returned virtual address is a current CPU mapping for
+ * the memory address given. It is only valid to use this function on
+ * addresses that have a kernel mapping
+ *
+ * This function does not handle bus mappings for DMA transfers. In
+ * almost all conceivable cases a device driver should not be using
+ * this function
+ */
+static inline void *phys_to_virt(unsigned long address)
+{
+ return (void *)__va(address);
+}
+
+#define bus_to_virt(a) phys_to_virt(a)
+
+static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
+ unsigned long flags)
+{
+ return (void *)address;
+}
+
+#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
+#define iounmap(addr) ((void)0)
+#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+/*
+ * Big Endian
+ */
+#define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
+#define out_be16(a, v) __raw_writew((v), (a))
+
+#define in_be32(a) __raw_readl((const void __iomem __force *)(a))
+#define in_be16(a) __raw_readw(a)
+
+/*
+ * Little endian
+ */
+
+#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a));
+#define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
+
+#define in_le32(a) __le32_to_cpu(__raw_readl(a))
+#define in_le16(a) __le16_to_cpu(__raw_readw(a))
+
+/* Byte ops */
+#define out_8(a, v) __raw_writeb((v), (a))
+#define in_8(a) __raw_readb(a)
+
+/* FIXME */
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+ return (void __iomem *) (port);
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+ /* Nothing to do */
+}
+
+#endif /* _ASM_MICROBLAZE_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IOCTLS_H
+#define _ASM_MICROBLAZE_IOCTLS_H
+
+#include <linux/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+/* Get Pty Number (of pty-mux device) */
+#define TIOCGPTN _IOR('T', 0x30, unsigned int)
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+
+#define FIOQSIZE 0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_MICROBLAZE_IOCTLS_H */
--- /dev/null
+#include <asm-generic/ipc.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IPCBUF_H
+#define _ASM_MICROBLAZE_IPCBUF_H
+
+/*
+ * The user_ipc_perm structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm {
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_MICROBLAZE_IPCBUF_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQ_H
+#define _ASM_MICROBLAZE_IRQ_H
+
+#define NR_IRQS 32
+
+#include <linux/interrupt.h>
+
+extern unsigned int nr_irq;
+
+#define NO_IRQ (-1)
+
+static inline int irq_canonicalize(int irq)
+{
+ return irq;
+}
+
+struct pt_regs;
+extern void do_IRQ(struct pt_regs *regs);
+
+/* irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+struct device_node;
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/** FIXME - not implement
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+static inline void irq_dispose_mapping(unsigned int virq)
+{
+ return;
+}
+
+#endif /* _ASM_MICROBLAZE_IRQ_H */
--- /dev/null
+#include <asm-generic/irq_regs.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_IRQFLAGS_H
+#define _ASM_MICROBLAZE_IRQFLAGS_H
+
+#include <linux/irqflags.h>
+
+# if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+
+# define local_irq_save(flags) \
+ do { \
+ asm volatile ("# local_irq_save \n\t" \
+ "msrclr %0, %1 \n\t" \
+ "nop \n\t" \
+ : "=r"(flags) \
+ : "i"(MSR_IE) \
+ : "memory"); \
+ } while (0)
+
+# define local_irq_disable() \
+ do { \
+ asm volatile ("# local_irq_disable \n\t" \
+ "msrclr r0, %0 \n\t" \
+ "nop \n\t" \
+ : \
+ : "i"(MSR_IE) \
+ : "memory"); \
+ } while (0)
+
+# define local_irq_enable() \
+ do { \
+ asm volatile ("# local_irq_enable \n\t" \
+ "msrset r0, %0 \n\t" \
+ "nop \n\t" \
+ : \
+ : "i"(MSR_IE) \
+ : "memory"); \
+ } while (0)
+
+# else /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR == 0 */
+
+# define local_irq_save(flags) \
+ do { \
+ register unsigned tmp; \
+ asm volatile ("# local_irq_save \n\t" \
+ "mfs %0, rmsr \n\t" \
+ "nop \n\t" \
+ "andi %1, %0, %2 \n\t" \
+ "mts rmsr, %1 \n\t" \
+ "nop \n\t" \
+ : "=r"(flags), "=r" (tmp) \
+ : "i"(~MSR_IE) \
+ : "memory"); \
+ } while (0)
+
+# define local_irq_disable() \
+ do { \
+ register unsigned tmp; \
+ asm volatile ("# local_irq_disable \n\t" \
+ "mfs %0, rmsr \n\t" \
+ "nop \n\t" \
+ "andi %0, %0, %1 \n\t" \
+ "mts rmsr, %0 \n\t" \
+ "nop \n\t" \
+ : "=r"(tmp) \
+ : "i"(~MSR_IE) \
+ : "memory"); \
+ } while (0)
+
+# define local_irq_enable() \
+ do { \
+ register unsigned tmp; \
+ asm volatile ("# local_irq_enable \n\t" \
+ "mfs %0, rmsr \n\t" \
+ "nop \n\t" \
+ "ori %0, %0, %1 \n\t" \
+ "mts rmsr, %0 \n\t" \
+ "nop \n\t" \
+ : "=r"(tmp) \
+ : "i"(MSR_IE) \
+ : "memory"); \
+ } while (0)
+
+# endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */
+
+#define local_save_flags(flags) \
+ do { \
+ asm volatile ("# local_save_flags \n\t" \
+ "mfs %0, rmsr \n\t" \
+ "nop \n\t" \
+ : "=r"(flags) \
+ : \
+ : "memory"); \
+ } while (0)
+
+#define local_irq_restore(flags) \
+ do { \
+ asm volatile ("# local_irq_restore \n\t"\
+ "mts rmsr, %0 \n\t" \
+ "nop \n\t" \
+ : \
+ : "r"(flags) \
+ : "memory"); \
+ } while (0)
+
+static inline int irqs_disabled(void)
+{
+ unsigned long flags;
+
+ local_save_flags(flags);
+ return ((flags & MSR_IE) == 0);
+}
+
+#define raw_irqs_disabled irqs_disabled
+#define raw_irqs_disabled_flags(flags) ((flags) == 0)
+
+#endif /* _ASM_MICROBLAZE_IRQFLAGS_H */
--- /dev/null
+#include <asm-generic/kdebug.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_KMAP_TYPES_H
+#define _ASM_MICROBLAZE_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR,
+};
+
+#endif /* _ASM_MICROBLAZE_KMAP_TYPES_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_LINKAGE_H
+#define _ASM_MICROBLAZE_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif /* _ASM_MICROBLAZE_LINKAGE_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_LMB_H
+#define _ASM_MICROBLAZE_LMB_H
+
+/* LMB limit is OFF */
+#define LMB_REAL_LIMIT 0xFFFFFFFF
+
+#endif /* _ASM_MICROBLAZE_LMB_H */
+
+
--- /dev/null
+#include <asm-generic/local.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMAN_H
+#define _ASM_MICROBLAZE_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* _ASM_MICROBLAZE_MMAN_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_H
+#define _ASM_MICROBLAZE_MMU_H
+
+#ifndef __ASSEMBLY__
+typedef struct {
+ struct vm_list_struct *vmlist;
+ unsigned long end_brk;
+} mm_context_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_MMU_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
+#define _ASM_MICROBLAZE_MMU_CONTEXT_H
+
+# define init_new_context(tsk, mm) ({ 0; })
+
+# define enter_lazy_tlb(mm, tsk) do {} while (0)
+# define change_mm_context(old, ctx, _pml4) do {} while (0)
+# define destroy_context(mm) do {} while (0)
+# define deactivate_mm(tsk, mm) do {} while (0)
+# define switch_mm(prev, next, tsk) do {} while (0)
+# define activate_mm(prev, next) do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_MODULE_H
+#define _ASM_MICROBLAZE_MODULE_H
+
+/* Microblaze Relocations */
+#define R_MICROBLAZE_NONE 0
+#define R_MICROBLAZE_32 1
+#define R_MICROBLAZE_32_PCREL 2
+#define R_MICROBLAZE_64_PCREL 3
+#define R_MICROBLAZE_32_PCREL_LO 4
+#define R_MICROBLAZE_64 5
+#define R_MICROBLAZE_32_LO 6
+#define R_MICROBLAZE_SRO32 7
+#define R_MICROBLAZE_SRW32 8
+#define R_MICROBLAZE_64_NONE 9
+#define R_MICROBLAZE_32_SYM_OP_SYM 10
+/* Keep this the last entry. */
+#define R_MICROBLAZE_NUM 11
+
+struct mod_arch_specific {
+ int foo;
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+typedef struct { volatile int counter; } module_t;
+
+#endif /* _ASM_MICROBLAZE_MODULE_H */
--- /dev/null
+#ifndef _ASM_MICROBLAZE_MSGBUF_H
+#define _ASM_MICROBLAZE_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_MICROBLAZE_MSGBUF_H */
--- /dev/null
+#include <asm-generic/mutex-dec.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_NAMEI_H
+#define _ASM_MICROBLAZE_NAMEI_H
+
+#ifdef __KERNEL__
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+#define __emul_prefix() NULL
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_NAMEI_H */
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ *
+ * based on PowerPC of_device.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_OF_DEVICE_H
+#define _ASM_MICROBLAZE_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device {
+ struct device_node *node; /* to be obsoleted */
+ u64 dma_mask; /* DMA mask */
+ struct device dev; /* Generic device interface */
+};
+
+extern ssize_t of_device_get_modalias(struct of_device *ofdev,
+ char *str, ssize_t len);
+
+extern struct of_device *of_device_alloc(struct device_node *np,
+ const char *bus_id,
+ struct device *parent);
+
+extern int of_device_uevent(struct device *dev,
+ struct kobj_uevent_env *env);
+
+extern void of_device_make_bus_id(struct of_device *dev);
+
+/* This is just here during the transition */
+#include <linux/of_device.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_OF_DEVICE_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MICROBLAZE_OF_PLATFORM_H
+#define _ASM_MICROBLAZE_OF_PLATFORM_H
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+/*
+ * The list of OF IDs below is used for matching bus types in the
+ * system whose devices are to be exposed as of_platform_devices.
+ *
+ * This is the default list valid for most platforms. This file provides
+ * functions who can take an explicit list if necessary though
+ *
+ * The search is always performed recursively looking for children of
+ * the provided device_node and recursively if such a children matches
+ * a bus type in the list
+ */
+
+static const struct of_device_id of_default_bus_ids[] = {
+ { .type = "soc", },
+ { .compatible = "soc", },
+ { .type = "plb5", },
+ { .type = "plb4", },
+ { .type = "opb", },
+ { .type = "simple", },
+ {},
+};
+
+/* Platform devices and busses creation */
+extern struct of_device *of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent);
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+ const struct of_device_id *matches,
+ struct device *parent);
+
+extern struct of_device *of_find_device_by_phandle(phandle ph);
+
+extern void of_instantiate_rtc(void);
+
+#endif /* _ASM_MICROBLAZE_OF_PLATFORM_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Changes for MMU support:
+ * Copyright (C) 2007 Xilinx, Inc. All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PAGE_H
+#define _ASM_MICROBLAZE_PAGE_H
+
+#include <linux/pfn.h>
+#include <asm/setup.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT (12)
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
+#define PAGE_DOWN(addr) ((addr)&(~((PAGE_SIZE)-1)))
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr, size) (((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr, size) ((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr, size) _ALIGN_UP(addr, size)
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. When not
+ * using MMU this corresponds to the first free page in physical memory (aligned
+ * on a page boundary).
+ */
+extern unsigned int __page_offset;
+#define PAGE_OFFSET __page_offset
+
+#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
+#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr) free_page(addr)
+
+#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
+
+
+#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
+#define copy_user_page(vto, vfrom, vaddr, topg) \
+ memcpy((vto), (vfrom), PAGE_SIZE)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct page *pgtable_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long ste[64]; } pmd_t;
+typedef struct { pmd_t pue[1]; } pud_t;
+typedef struct { pud_t pge[1]; } pgd_t;
+
+
+#define pte_val(x) ((x).pte)
+#define pgprot_val(x) ((x).pgprot)
+#define pmd_val(x) ((x).ste[0])
+#define pud_val(x) ((x).pue[0])
+#define pgd_val(x) ((x).pge[0])
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pmd(x) ((pmd_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+/**
+ * Conversions for virtual address, physical address, pfn, and struct
+ * page are defined in the following files.
+ *
+ * virt -+
+ * | asm-microblaze/page.h
+ * phys -+
+ * | linux/pfn.h
+ * pfn -+
+ * | asm-generic/memory_model.h
+ * page -+
+ *
+ */
+
+extern unsigned long max_low_pfn;
+extern unsigned long min_low_pfn;
+extern unsigned long max_pfn;
+
+#define __pa(vaddr) ((unsigned long) (vaddr))
+#define __va(paddr) ((void *) (paddr))
+
+#define phys_to_pfn(phys) (PFN_DOWN(phys))
+#define pfn_to_phys(pfn) (PFN_PHYS(pfn))
+
+#define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr))))
+#define pfn_to_virt(pfn) __va(pfn_to_phys((pfn)))
+
+#define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr)))
+#define page_to_virt(page) (pfn_to_virt(page_to_pfn(page)))
+
+#define page_to_phys(page) (pfn_to_phys(page_to_pfn(page)))
+#define page_to_bus(page) (page_to_phys(page))
+#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
+
+extern unsigned int memory_start;
+extern unsigned int memory_end;
+extern unsigned int memory_size;
+
+#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr)
+
+#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
+
+#else
+#define tophys(rd, rs) (addik rd, rs, 0)
+#define tovirt(rd, rs) (addik rd, rs, 0)
+#endif /* __ASSEMBLY__ */
+
+#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr)))
+
+/* Convert between virtual and physical address for MMU. */
+/* Handle MicroBlaze processor with virtual memory. */
+#define __virt_to_phys(addr) addr
+#define __phys_to_virt(addr) addr
+
+#define TOPHYS(addr) __virt_to_phys(addr)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _ASM_MICROBLAZE_PAGE_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PARAM_H
+#define _ASM_MICROBLAZE_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ /* internal kernel timer frequency */
+#define USER_HZ 100 /* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+
+#endif /* _ASM_MICROBLAZE_PARAM_H */
--- /dev/null
+#include <linux/pci.h>
--- /dev/null
+#include <linux/io.h>
--- /dev/null
+#include <asm-generic/percpu.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGALLOC_H
+#define _ASM_MICROBLAZE_PGALLOC_H
+
+#define check_pgt_cache() do {} while (0)
+
+#endif /* _ASM_MICROBLAZE_PGALLOC_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PGTABLE_H
+#define _ASM_MICROBLAZE_PGTABLE_H
+
+#include <asm/setup.h>
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define pgd_present(pgd) (1) /* pages are always present on non MMU */
+#define pgd_none(pgd) (0)
+#define pgd_bad(pgd) (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr) (1)
+#define pmd_offset(a, b) ((void *) 0)
+
+#define PAGE_NONE __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_SHARED __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_COPY __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_READONLY __pgprot(0) /* these mean nothing to non MMU */
+#define PAGE_KERNEL __pgprot(0) /* these mean nothing to non MMU */
+
+#define __swp_type(x) (0)
+#define __swp_offset(x) (0)
+#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+
+#ifndef __ASSEMBLY__
+static inline int pte_file(pte_t pte) { return 0; }
+#endif /* __ASSEMBLY__ */
+
+#define ZERO_PAGE(vaddr) ({ BUG(); NULL; })
+
+#define swapper_pg_dir ((pgd_t *) NULL)
+
+#define pgtable_cache_init() do {} while (0)
+
+#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+void setup_memory(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_PGTABLE_H */
--- /dev/null
+#include <asm-generic/poll.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_POSIX_TYPES_H
+#define _ASM_MICROBLAZE_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned int __kernel_mode_t;
+typedef unsigned int __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned int __kernel_ipc_pid_t;
+typedef unsigned int __kernel_uid_t;
+typedef unsigned int __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char *__kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned int __kernel_old_uid_t;
+typedef unsigned int __kernel_old_gid_t;
+typedef unsigned int __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef __FD_CLR
+#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef __FD_ISSET
+#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
+
+#undef __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset(fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_MICROBLAZE_POSIX_TYPES_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROCESSOR_H
+#define _ASM_MICROBLAZE_PROCESSOR_H
+
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+#include <asm/registers.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/current.h>
+
+# ifndef __ASSEMBLY__
+/* from kernel/cpu/mb.c */
+extern const struct seq_operations cpuinfo_op;
+
+# define cpu_relax() barrier()
+# define cpu_sleep() do {} while (0)
+# define prepare_to_copy(tsk) do {} while (0)
+
+# endif /* __ASSEMBLY__ */
+
+#define task_pt_regs(tsk) \
+ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
+/*
+ * User space process size: memory size
+ *
+ * TASK_SIZE on MMU cpu is usually 1GB. However, on no-MMU arch, both
+ * user processes and the kernel is on the same memory region. They
+ * both share the memory space and that is limited by the amount of
+ * physical memory. thus, we set TASK_SIZE == amount of total memory.
+ */
+# define TASK_SIZE (0x81000000 - 0x80000000)
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+# define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+# define TASK_UNMAPPED_BASE 0
+
+/* definition in include/linux/sched.h */
+struct task_struct;
+
+/* thread_struct is gone. use thread_info instead. */
+struct thread_struct { };
+# define INIT_THREAD { }
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Free all resources held by a thread. */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+# define KSTK_EIP(tsk) (0)
+# define KSTK_ESP(tsk) (0)
+
+#endif /* _ASM_MICROBLAZE_PROCESSOR_H */
--- /dev/null
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_MICROBLAZE_PROM_H
+#define _ASM_MICROBLAZE_PROM_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1
+
+#define of_compat_cmp(s1, s2, l) strncasecmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2) strcmp((s1), (s2))
+#define of_node_cmp(s1, s2) strcasecmp((s1), (s2))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER 0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */
+#define OF_DT_END_NODE 0x2 /* End node */
+#define OF_DT_PROP 0x3 /* Property: name off, size, content */
+#define OF_DT_NOP 0x4 /* nop */
+#define OF_DT_END 0x9
+
+#define OF_DT_VERSION 0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header {
+ u32 magic; /* magic word OF_DT_HEADER */
+ u32 totalsize; /* total size of DT block */
+ u32 off_dt_struct; /* offset to structure */
+ u32 off_dt_strings; /* offset to strings */
+ u32 off_mem_rsvmap; /* offset to memory reserve map */
+ u32 version; /* format version */
+ u32 last_comp_version; /* last compatible version */
+ /* version 2 fields below */
+ u32 boot_cpuid_phys; /* Physical CPU id we're booting on */
+ /* version 3 fields below */
+ u32 dt_strings_size; /* size of the DT strings block */
+ /* version 17 fields below */
+ u32 dt_struct_size; /* size of the DT structure block */
+};
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+ char *name;
+ int length;
+ void *value;
+ struct property *next;
+};
+
+struct device_node {
+ const char *name;
+ const char *type;
+ phandle node;
+ phandle linux_phandle;
+ char *full_name;
+
+ struct property *properties;
+ struct property *deadprops; /* removed properties */
+ struct device_node *parent;
+ struct device_node *child;
+ struct device_node *sibling;
+ struct device_node *next; /* next device of same type */
+ struct device_node *allnext; /* next in list of all nodes */
+ struct proc_dir_entry *pde; /* this node's proc directory */
+ struct kref kref;
+ unsigned long _flags;
+ void *data;
+};
+
+extern struct device_node *of_chosen;
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+ return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+ set_bit(flag, &n->_flags);
+}
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn,
+ struct proc_dir_entry *de)
+{
+ dn->pde = de;
+}
+
+extern struct device_node *allnodes; /* temporary while merging */
+extern rwlock_t devtree_lock; /* temporary while merging */
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data);
+extern void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size);
+extern int __init
+ of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern int early_uartlite_console(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node *np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node *np, struct property *prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+ struct property *newprop,
+ struct property *oldprop);
+
+extern struct resource *request_OF_resource(struct device_node *node,
+ int index, const char *name_postfix);
+extern int release_OF_resource(struct device_node *node, int index);
+
+/*
+ * OF address retreival & translation
+ */
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+ u64 r = 0;
+ while (size--)
+ r = (r << 32) | *(cell++);
+ return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#define of_read_ulong(cell, size) of_read_number(cell, size)
+
+/* Translate an OF address block into a CPU physical address
+ */
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+ u64 *size, unsigned int *flags);
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+ u64 *size, unsigned int *flags);
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r);
+
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+ unsigned long *busno, unsigned long *phys, unsigned long *size);
+
+extern void kdump_move_device_tree(void);
+
+/* CPU OF node matching */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+ struct device_node *controller; /* Interrupt controller node */
+ u32 size; /* Specifier size */
+ u32 specifier[OF_MAX_IRQ_SPEC]; /* Specifier copy */
+};
+
+/**
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags: flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC 0x00000001
+#define OF_IMAP_NO_PHANDLE 0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent: the device interrupt parent
+ * @intspec: interrupt specifier ("interrupts" property of the device)
+ * @ointsize: size of the passed in interrupt specifier
+ * @addr: address specifier (start of "reg" property of the device)
+ * @out_irq: structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+ u32 ointsize, const u32 *addr,
+ struct of_irq *out_irq);
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device: the device whose interrupt is to be resolved
+ * @index: index of the interrupt to resolve
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+ struct of_irq *out_irq);
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+extern int of_irq_to_resource(struct device_node *dev, int index,
+ struct resource *r);
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device: the device whose io range will be mapped
+ * @index: index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/*
+ * NB: This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_PROM_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PTRACE_H
+#define _ASM_MICROBLAZE_PTRACE_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+typedef unsigned long microblaze_reg_t;
+
+struct pt_regs {
+ microblaze_reg_t r0;
+ microblaze_reg_t r1;
+ microblaze_reg_t r2;
+ microblaze_reg_t r3;
+ microblaze_reg_t r4;
+ microblaze_reg_t r5;
+ microblaze_reg_t r6;
+ microblaze_reg_t r7;
+ microblaze_reg_t r8;
+ microblaze_reg_t r9;
+ microblaze_reg_t r10;
+ microblaze_reg_t r11;
+ microblaze_reg_t r12;
+ microblaze_reg_t r13;
+ microblaze_reg_t r14;
+ microblaze_reg_t r15;
+ microblaze_reg_t r16;
+ microblaze_reg_t r17;
+ microblaze_reg_t r18;
+ microblaze_reg_t r19;
+ microblaze_reg_t r20;
+ microblaze_reg_t r21;
+ microblaze_reg_t r22;
+ microblaze_reg_t r23;
+ microblaze_reg_t r24;
+ microblaze_reg_t r25;
+ microblaze_reg_t r26;
+ microblaze_reg_t r27;
+ microblaze_reg_t r28;
+ microblaze_reg_t r29;
+ microblaze_reg_t r30;
+ microblaze_reg_t r31;
+ microblaze_reg_t pc;
+ microblaze_reg_t msr;
+ microblaze_reg_t ear;
+ microblaze_reg_t esr;
+ microblaze_reg_t fsr;
+ int pt_mode;
+};
+
+#define kernel_mode(regs) ((regs)->pt_mode)
+#define user_mode(regs) (!kernel_mode(regs))
+
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+void show_regs(struct pt_regs *);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MICROBLAZE_PTRACE_H */
--- /dev/null
+/*
+ * Support for the MicroBlaze PVR (Processor Version Register)
+ *
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ * Copyright (C) 2007 - 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_PVR_H
+#define _ASM_MICROBLAZE_PVR_H
+
+#define PVR_MSR_BIT 0x400
+
+struct pvr_s {
+ unsigned pvr[16];
+};
+
+/* The following taken from Xilinx's standalone BSP pvr.h */
+
+/* Basic PVR mask */
+#define PVR0_PVR_FULL_MASK 0x80000000
+#define PVR0_USE_BARREL_MASK 0x40000000
+#define PVR0_USE_DIV_MASK 0x20000000
+#define PVR0_USE_HW_MUL_MASK 0x10000000
+#define PVR0_USE_FPU_MASK 0x08000000
+#define PVR0_USE_EXC_MASK 0x04000000
+#define PVR0_USE_ICACHE_MASK 0x02000000
+#define PVR0_USE_DCACHE_MASK 0x01000000
+#define PVR0_USE_MMU 0x00800000 /* new */
+#define PVR0_VERSION_MASK 0x0000FF00
+#define PVR0_USER1_MASK 0x000000FF
+
+/* User 2 PVR mask */
+#define PVR1_USER2_MASK 0xFFFFFFFF
+
+/* Configuration PVR masks */
+#define PVR2_D_OPB_MASK 0x80000000
+#define PVR2_D_LMB_MASK 0x40000000
+#define PVR2_I_OPB_MASK 0x20000000
+#define PVR2_I_LMB_MASK 0x10000000
+#define PVR2_INTERRUPT_IS_EDGE_MASK 0x08000000
+#define PVR2_EDGE_IS_POSITIVE_MASK 0x04000000
+#define PVR2_D_PLB_MASK 0x02000000 /* new */
+#define PVR2_I_PLB_MASK 0x01000000 /* new */
+#define PVR2_INTERCONNECT 0x00800000 /* new */
+#define PVR2_USE_EXTEND_FSL 0x00080000 /* new */
+#define PVR2_USE_FSL_EXC 0x00040000 /* new */
+#define PVR2_USE_MSR_INSTR 0x00020000
+#define PVR2_USE_PCMP_INSTR 0x00010000
+#define PVR2_AREA_OPTIMISED 0x00008000
+#define PVR2_USE_BARREL_MASK 0x00004000
+#define PVR2_USE_DIV_MASK 0x00002000
+#define PVR2_USE_HW_MUL_MASK 0x00001000
+#define PVR2_USE_FPU_MASK 0x00000800
+#define PVR2_USE_MUL64_MASK 0x00000400
+#define PVR2_USE_FPU2_MASK 0x00000200 /* new */
+#define PVR2_USE_IPLBEXC 0x00000100
+#define PVR2_USE_DPLBEXC 0x00000080
+#define PVR2_OPCODE_0x0_ILL_MASK 0x00000040
+#define PVR2_UNALIGNED_EXC_MASK 0x00000020
+#define PVR2_ILL_OPCODE_EXC_MASK 0x00000010
+#define PVR2_IOPB_BUS_EXC_MASK 0x00000008
+#define PVR2_DOPB_BUS_EXC_MASK 0x00000004
+#define PVR2_DIV_ZERO_EXC_MASK 0x00000002
+#define PVR2_FPU_EXC_MASK 0x00000001
+
+/* Debug and exception PVR masks */
+#define PVR3_DEBUG_ENABLED_MASK 0x80000000
+#define PVR3_NUMBER_OF_PC_BRK_MASK 0x1E000000
+#define PVR3_NUMBER_OF_RD_ADDR_BRK_MASK 0x00380000
+#define PVR3_NUMBER_OF_WR_ADDR_BRK_MASK 0x0000E000
+#define PVR3_FSL_LINKS_MASK 0x00000380
+
+/* ICache config PVR masks */
+#define PVR4_USE_ICACHE_MASK 0x80000000
+#define PVR4_ICACHE_ADDR_TAG_BITS_MASK 0x7C000000
+#define PVR4_ICACHE_USE_FSL_MASK 0x02000000
+#define PVR4_ICACHE_ALLOW_WR_MASK 0x01000000
+#define PVR4_ICACHE_LINE_LEN_MASK 0x00E00000
+#define PVR4_ICACHE_BYTE_SIZE_MASK 0x001F0000
+
+/* DCache config PVR masks */
+#define PVR5_USE_DCACHE_MASK 0x80000000
+#define PVR5_DCACHE_ADDR_TAG_BITS_MASK 0x7C000000
+#define PVR5_DCACHE_USE_FSL_MASK 0x02000000
+#define PVR5_DCACHE_ALLOW_WR_MASK 0x01000000
+#define PVR5_DCACHE_LINE_LEN_MASK 0x00E00000
+#define PVR5_DCACHE_BYTE_SIZE_MASK 0x001F0000
+
+/* ICache base address PVR mask */
+#define PVR6_ICACHE_BASEADDR_MASK 0xFFFFFFFF
+
+/* ICache high address PVR mask */
+#define PVR7_ICACHE_HIGHADDR_MASK 0xFFFFFFFF
+
+/* DCache base address PVR mask */
+#define PVR8_DCACHE_BASEADDR_MASK 0xFFFFFFFF
+
+/* DCache high address PVR mask */
+#define PVR9_DCACHE_HIGHADDR_MASK 0xFFFFFFFF
+
+/* Target family PVR mask */
+#define PVR10_TARGET_FAMILY_MASK 0xFF000000
+
+/* MMU descrtiption */
+#define PVR11_USE_MMU 0xC0000000
+#define PVR11_MMU_ITLB_SIZE 0x38000000
+#define PVR11_MMU_DTLB_SIZE 0x07000000
+#define PVR11_MMU_TLB_ACCESS 0x00C00000
+#define PVR11_MMU_ZONES 0x003C0000
+/* MSR Reset value PVR mask */
+#define PVR11_MSR_RESET_VALUE_MASK 0x000007FF
+
+
+/* PVR access macros */
+#define PVR_IS_FULL(pvr) (pvr.pvr[0] & PVR0_PVR_FULL_MASK)
+#define PVR_USE_BARREL(pvr) (pvr.pvr[0] & PVR0_USE_BARREL_MASK)
+#define PVR_USE_DIV(pvr) (pvr.pvr[0] & PVR0_USE_DIV_MASK)
+#define PVR_USE_HW_MUL(pvr) (pvr.pvr[0] & PVR0_USE_HW_MUL_MASK)
+#define PVR_USE_FPU(pvr) (pvr.pvr[0] & PVR0_USE_FPU_MASK)
+#define PVR_USE_FPU2(pvr) (pvr.pvr[2] & PVR2_USE_FPU2_MASK)
+#define PVR_USE_ICACHE(pvr) (pvr.pvr[0] & PVR0_USE_ICACHE_MASK)
+#define PVR_USE_DCACHE(pvr) (pvr.pvr[0] & PVR0_USE_DCACHE_MASK)
+#define PVR_VERSION(pvr) ((pvr.pvr[0] & PVR0_VERSION_MASK) >> 8)
+#define PVR_USER1(pvr) (pvr.pvr[0] & PVR0_USER1_MASK)
+#define PVR_USER2(pvr) (pvr.pvr[1] & PVR1_USER2_MASK)
+
+#define PVR_D_OPB(pvr) (pvr.pvr[2] & PVR2_D_OPB_MASK)
+#define PVR_D_LMB(pvr) (pvr.pvr[2] & PVR2_D_LMB_MASK)
+#define PVR_I_OPB(pvr) (pvr.pvr[2] & PVR2_I_OPB_MASK)
+#define PVR_I_LMB(pvr) (pvr.pvr[2] & PVR2_I_LMB_MASK)
+#define PVR_INTERRUPT_IS_EDGE(pvr) \
+ (pvr.pvr[2] & PVR2_INTERRUPT_IS_EDGE_MASK)
+#define PVR_EDGE_IS_POSITIVE(pvr) \
+ (pvr.pvr[2] & PVR2_EDGE_IS_POSITIVE_MASK)
+#define PVR_USE_MSR_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_MSR_INSTR)
+#define PVR_USE_PCMP_INSTR(pvr) (pvr.pvr[2] & PVR2_USE_PCMP_INSTR)
+#define PVR_AREA_OPTIMISED(pvr) (pvr.pvr[2] & PVR2_AREA_OPTIMISED)
+#define PVR_USE_MUL64(pvr) (pvr.pvr[2] & PVR2_USE_MUL64_MASK)
+#define PVR_OPCODE_0x0_ILLEGAL(pvr) \
+ (pvr.pvr[2] & PVR2_OPCODE_0x0_ILL_MASK)
+#define PVR_UNALIGNED_EXCEPTION(pvr) \
+ (pvr.pvr[2] & PVR2_UNALIGNED_EXC_MASK)
+#define PVR_ILL_OPCODE_EXCEPTION(pvr) \
+ (pvr.pvr[2] & PVR2_ILL_OPCODE_EXC_MASK)
+#define PVR_IOPB_BUS_EXCEPTION(pvr) \
+ (pvr.pvr[2] & PVR2_IOPB_BUS_EXC_MASK)
+#define PVR_DOPB_BUS_EXCEPTION(pvr) \
+ (pvr.pvr[2] & PVR2_DOPB_BUS_EXC_MASK)
+#define PVR_DIV_ZERO_EXCEPTION(pvr) \
+ (pvr.pvr[2] & PVR2_DIV_ZERO_EXC_MASK)
+#define PVR_FPU_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_FPU_EXC_MASK)
+#define PVR_FSL_EXCEPTION(pvr) (pvr.pvr[2] & PVR2_USE_EXTEND_FSL)
+
+#define PVR_DEBUG_ENABLED(pvr) (pvr.pvr[3] & PVR3_DEBUG_ENABLED_MASK)
+#define PVR_NUMBER_OF_PC_BRK(pvr) \
+ ((pvr.pvr[3] & PVR3_NUMBER_OF_PC_BRK_MASK) >> 25)
+#define PVR_NUMBER_OF_RD_ADDR_BRK(pvr) \
+ ((pvr.pvr[3] & PVR3_NUMBER_OF_RD_ADDR_BRK_MASK) >> 19)
+#define PVR_NUMBER_OF_WR_ADDR_BRK(pvr) \
+ ((pvr.pvr[3] & PVR3_NUMBER_OF_WR_ADDR_BRK_MASK) >> 13)
+#define PVR_FSL_LINKS(pvr) ((pvr.pvr[3] & PVR3_FSL_LINKS_MASK) >> 7)
+
+#define PVR_ICACHE_ADDR_TAG_BITS(pvr) \
+ ((pvr.pvr[4] & PVR4_ICACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_ICACHE_USE_FSL(pvr) (pvr.pvr[4] & PVR4_ICACHE_USE_FSL_MASK)
+#define PVR_ICACHE_ALLOW_WR(pvr) (pvr.pvr[4] & PVR4_ICACHE_ALLOW_WR_MASK)
+#define PVR_ICACHE_LINE_LEN(pvr) \
+ (1 << ((pvr.pvr[4] & PVR4_ICACHE_LINE_LEN_MASK) >> 21))
+#define PVR_ICACHE_BYTE_SIZE(pvr) \
+ (1 << ((pvr.pvr[4] & PVR4_ICACHE_BYTE_SIZE_MASK) >> 16))
+
+#define PVR_DCACHE_ADDR_TAG_BITS(pvr) \
+ ((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26)
+#define PVR_DCACHE_USE_FSL(pvr) (pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK)
+#define PVR_DCACHE_ALLOW_WR(pvr) (pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK)
+#define PVR_DCACHE_LINE_LEN(pvr) \
+ (1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21))
+#define PVR_DCACHE_BYTE_SIZE(pvr) \
+ (1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16))
+
+
+#define PVR_ICACHE_BASEADDR(pvr) (pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK)
+#define PVR_ICACHE_HIGHADDR(pvr) (pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK)
+
+#define PVR_DCACHE_BASEADDR(pvr) (pvr.pvr[8] & PVR8_DCACHE_BASEADDR_MASK)
+#define PVR_DCACHE_HIGHADDR(pvr) (pvr.pvr[9] & PVR9_DCACHE_HIGHADDR_MASK)
+
+#define PVR_TARGET_FAMILY(pvr) ((pvr.pvr[10] & PVR10_TARGET_FAMILY_MASK) >> 24)
+
+#define PVR_MSR_RESET_VALUE(pvr) \
+ (pvr.pvr[11] & PVR11_MSR_RESET_VALUE_MASK)
+
+/* mmu */
+#define PVR_USE_MMU(pvr) ((pvr.pvr[11] & PVR11_USE_MMU) >> 30)
+#define PVR_MMU_ITLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_ITLB_SIZE)
+#define PVR_MMU_DTLB_SIZE(pvr) (pvr.pvr[11] & PVR11_MMU_DTLB_SIZE)
+#define PVR_MMU_TLB_ACCESS(pvr) (pvr.pvr[11] & PVR11_MMU_TLB_ACCESS)
+#define PVR_MMU_ZONES(pvr) (pvr.pvr[11] & PVR11_MMU_ZONES)
+
+
+int cpu_has_pvr(void);
+void get_pvr(struct pvr_s *pvr);
+
+#endif /* _ASM_MICROBLAZE_PVR_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_REGISTERS_H
+#define _ASM_MICROBLAZE_REGISTERS_H
+
+#define MSR_BE (1<<0) /* 0x001 */
+#define MSR_IE (1<<1) /* 0x002 */
+#define MSR_C (1<<2) /* 0x004 */
+#define MSR_BIP (1<<3) /* 0x008 */
+#define MSR_FSL (1<<4) /* 0x010 */
+#define MSR_ICE (1<<5) /* 0x020 */
+#define MSR_DZ (1<<6) /* 0x040 */
+#define MSR_DCE (1<<7) /* 0x080 */
+#define MSR_EE (1<<8) /* 0x100 */
+#define MSR_EIP (1<<9) /* 0x200 */
+#define MSR_CC (1<<31)
+
+/* Floating Point Status Register (FSR) Bits */
+#define FSR_IO (1<<4) /* Invalid operation */
+#define FSR_DZ (1<<3) /* Divide-by-zero */
+#define FSR_OF (1<<2) /* Overflow */
+#define FSR_UF (1<<1) /* Underflow */
+#define FSR_DO (1<<0) /* Denormalized operand error */
+
+#endif /* _ASM_MICROBLAZE_REGISTERS_H */
--- /dev/null
+#include <asm-generic/resource.h>
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SCATTERLIST_H
+#define _ASM_MICROBLAZE_SCATTERLIST_H
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ dma_addr_t dma_address;
+ unsigned int offset;
+ unsigned int length;
+};
+
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#endif /* _ASM_MICROBLAZE_SCATTERLIST_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SECTIONS_H
+#define _ASM_MICROBLAZE_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+# ifndef __ASSEMBLY__
+extern char _ssbss[], _esbss[];
+extern unsigned long __ivt_start[], __ivt_end[];
+
+# ifdef CONFIG_MTD_UCLINUX
+extern char *_ebss;
+# endif
+
+extern u32 _fdt_start[], _fdt_end[];
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SECTIONS_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek
+ * Copyright (C) 2008 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SEGMENT_H
+#define _ASM_MICROBLAZE_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+/*
+ * On Microblaze the fs value is actually the top of the corresponding
+ * address space.
+ *
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
+ */
+# define KERNEL_DS ((mm_segment_t){0})
+# define USER_DS KERNEL_DS
+
+# define get_ds() (KERNEL_DS)
+# define get_fs() (current_thread_info()->addr_limit)
+# define set_fs(x) \
+ do { current_thread_info()->addr_limit = (x); } while (0)
+
+# define segment_eq(a, b) ((a).seg == (b).seg)
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SEGMENT_H */
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SELFMOD_H
+#define _ASM_MICROBLAZE_SELFMOD_H
+
+/*
+ * BARRIER_BASE_ADDR is constant address for selfmod function.
+ * do not change this value - selfmod function is in
+ * arch/microblaze/kernel/selfmod.c: selfmod_function()
+ *
+ * last 16 bits is used for storing register offset
+ */
+
+#define BARRIER_BASE_ADDR 0x1234ff00
+
+void selfmod_function(const int *arr_fce, const unsigned int base);
+
+#endif /* _ASM_MICROBLAZE_SELFMOD_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SEMBUF_H
+#define _ASM_MICROBLAZE_SEMBUF_H
+
+/*
+ * The semid64_ds structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+
+#endif /* _ASM_MICROBLAZE_SEMBUF_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SERIAL_H
+#define _ASM_MICROBLAZE_SERIAL_H
+
+# define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_MICROBLAZE_SERIAL_H */
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SETUP_H
+#define _ASM_MICROBLAZE_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+# ifndef __ASSEMBLY__
+
+# ifdef __KERNEL__
+extern unsigned int boot_cpuid; /* move to smp.h */
+
+extern char cmd_line[COMMAND_LINE_SIZE];
+# endif/* __KERNEL__ */
+
+void early_printk(const char *fmt, ...);
+
+int setup_early_printk(char *opt);
+void disable_early_printk(void);
+
+void heartbeat(void);
+void setup_heartbeat(void);
+
+unsigned long long sched_clock(void);
+
+void time_init(void);
+void init_IRQ(void);
+void machine_early_init(const char *cmdline, unsigned int ram,
+ unsigned int fdt);
+
+void machine_restart(char *cmd);
+void machine_shutdown(void);
+void machine_halt(void);
+void machine_power_off(void);
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SETUP_H */
--- /dev/null
+#ifndef _ASM_MICROBLAZE_SHMBUF_H
+#define _ASM_MICROBLAZE_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for microblaze architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_MICROBLAZE_SHMBUF_H */
--- /dev/null
+#ifndef _ASM_MICROBLAZE_SHMPARAM_H
+#define _ASM_MICROBLAZE_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_MICROBLAZE_SHMPARAM_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGCONTEXT_H
+#define _ASM_MICROBLAZE_SIGCONTEXT_H
+
+/* FIXME should be linux/ptrace.h */
+#include <asm/ptrace.h>
+
+struct sigcontext {
+ struct pt_regs regs;
+ unsigned long oldmask;
+};
+
+#endif /* _ASM_MICROBLAZE_SIGCONTEXT_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGINFO_H
+#define _ASM_MICROBLAZE_SIGINFO_H
+
+#include <linux/types.h>
+#include <asm-generic/siginfo.h>
+
+#endif /* _ASM_MICROBLAZE_SIGINFO_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ * Tetsuya OHKAWA <tetsuya@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SIGNAL_H
+#define _ASM_MICROBLAZE_SIGNAL_H
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001
+#define SA_NOCLDWAIT 0x00000002
+#define SA_SIGINFO 0x00000004
+#define SA_ONSTACK 0x08000000
+#define SA_RESTART 0x10000000
+#define SA_NODEFER 0x40000000
+#define SA_RESETHAND 0x80000000
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+# ifndef __ASSEMBLY__
+# include <linux/types.h>
+# include <asm-generic/signal.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+# ifdef __KERNEL__
+/*
+ * Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+# define _NSIG 64
+# define _NSIG_BPW 32
+# define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+
+# include <asm/sigcontext.h>
+# undef __HAVE_ARCH_SIG_BITOPS
+
+# define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+# else /* !__KERNEL__ */
+
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+# define NSIG 32
+typedef unsigned long sigset_t;
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+# define sa_handler _u._sa_handler
+# define sa_sigaction _u._sa_sigaction
+
+# endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_SIGNAL_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SOCKET_H
+#define _ASM_MICROBLAZE_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
+#endif /* _ASM_MICROBLAZE_SOCKET_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SOCKIOS_H
+#define _ASM_MICROBLAZE_SOCKIOS_H
+
+#include <linux/ioctl.h>
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_MICROBLAZE_SOCKIOS_H */
--- /dev/null
+/*
+ * Microblaze stat structure
+ *
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef _ASM_MICROBLAZE_STAT_H
+#define _ASM_MICROBLAZE_STAT_H
+
+#include <linux/posix_types.h>
+
+struct stat {
+ unsigned int st_dev;
+ unsigned long st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned int st_rdev;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long __unused1; /* unsigned long st_atime_nsec */
+ unsigned long st_mtime;
+ unsigned long __unused2; /* unsigned long st_mtime_nsec */
+ unsigned long st_ctime;
+ unsigned long __unused3; /* unsigned long st_ctime_nsec */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned long __unused1;
+
+ unsigned long long st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned int st_uid;
+ unsigned int st_gid;
+
+ unsigned long long st_rdev;
+ unsigned long __unused3;
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long st_blocks; /* No. of 512-byte blocks allocated */
+ unsigned long __unused4; /* future possible st_blocks high bits */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long __unused8;
+};
+
+#endif /* _ASM_MICROBLAZE_STAT_H */
--- /dev/null
+#include <asm-generic/statfs.h>
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_STRING_H
+#define _ASM_MICROBLAZE_STRING_H
+
+#ifndef __KERNEL__
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_STRING_H */
--- /dev/null
+#ifndef _ASM_MICROBLAZE_SWAB_H
+#define _ASM_MICROBLAZE_SWAB_H
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#define __SWAB_64_THRU_32__
+#endif
+
+#endif /* _ASM_MICROBLAZE_SWAB_H */
--- /dev/null
+#ifndef __ASM_MICROBLAZE_SYSCALLS_H
+#define __ASM_MICROBLAZE_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <linux/signal.h>
+
+/* FIXME will be removed */
+asmlinkage int sys_ipc(uint call, int first, int second,
+ int third, void *ptr, long fifth);
+
+struct pt_regs;
+asmlinkage int sys_vfork(struct pt_regs *regs);
+asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs);
+asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+ char __user *__user *envp, struct pt_regs *regs);
+
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff);
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, off_t offset);
+
+/* from signal.c */
+asmlinkage int sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs);
+
+asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
+ struct pt_regs *regs);
+
+asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
+ struct old_sigaction *oact);
+
+asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+ struct pt_regs *regs);
+
+asmlinkage int sys_sigreturn(struct pt_regs *regs);
+
+asmlinkage int sys_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_MICROBLAZE_SYSCALLS_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_SYSTEM_H
+#define _ASM_MICROBLAZE_SYSTEM_H
+
+#include <asm/registers.h>
+#include <asm/setup.h>
+#include <asm/irqflags.h>
+
+struct task_struct;
+struct thread_info;
+
+extern struct task_struct *_switch_to(struct thread_info *prev,
+ struct thread_info *next);
+
+#define switch_to(prev, next, last) \
+ do { \
+ (last) = _switch_to(task_thread_info(prev), \
+ task_thread_info(next)); \
+ } while (0)
+
+#define smp_read_barrier_depends() do {} while (0)
+#define read_barrier_depends() do {} while (0)
+
+#define nop() asm volatile ("nop")
+#define mb() barrier()
+#define rmb() mb()
+#define wmb() mb()
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+
+void show_trace(struct task_struct *task, unsigned long *stack);
+void __bad_xchg(volatile void *ptr, int size);
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
+{
+ unsigned long ret;
+ unsigned long flags;
+
+ switch (size) {
+ case 1:
+ local_irq_save(flags);
+ ret = *(volatile unsigned char *)ptr;
+ *(volatile unsigned char *)ptr = x;
+ local_irq_restore(flags);
+ break;
+
+ case 4:
+ local_irq_save(flags);
+ ret = *(volatile unsigned long *)ptr;
+ *(volatile unsigned long *)ptr = x;
+ local_irq_restore(flags);
+ break;
+ default:
+ __bad_xchg(ptr, size), ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
+void disable_hlt(void);
+void enable_hlt(void);
+void default_idle(void);
+
+#define xchg(ptr, x) \
+ ((__typeof__(*(ptr))) __xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+void free_init_pages(char *what, unsigned long begin, unsigned long end);
+void free_initmem(void);
+extern char *klimit;
+extern void ret_from_fork(void);
+
+#ifdef CONFIG_DEBUG_FS
+extern struct dentry *of_debugfs_root;
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* _ASM_MICROBLAZE_SYSTEM_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TERMBITS_H
+#define _ASM_MICROBLAZE_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define BOTHER 0010000
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_MICROBLAZE_TERMBITS_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TERMIOS_H
+#define _ASM_MICROBLAZE_TERMIOS_H
+
+#include <linux/string.h>
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* Modem lines */
+
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* Line disciplines */
+
+#define N_TTY 0
+#define N_SLIP 1
+#define N_MOUSE 2
+#define N_PPP 3
+#define N_STRIP 4
+#define N_AX25 5
+#define N_X25 6 /* X.25 async */
+#define N_6PACK 7
+#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964 9 /* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards
+ about SMS messages */
+#define N_HDLC 13 /* synchronous HDLC */
+#define N_SYNC_PPP 14
+#define N_HCI 15 /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/termios.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_TERMIOS_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_THREAD_INFO_H
+#define _ASM_MICROBLAZE_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* we have 8k stack */
+#define THREAD_SHIFT 13
+#define THREAD_SIZE (1 << THREAD_SHIFT)
+#define THREAD_SIZE_ORDER 1
+
+#ifndef __ASSEMBLY__
+# include <linux/types.h>
+# include <asm/processor.h>
+# include <asm/segment.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+
+struct cpu_context {
+ __u32 r1; /* stack pointer */
+ __u32 r2;
+ /* dedicated registers */
+ __u32 r13;
+ __u32 r14;
+ __u32 r15;
+ __u32 r16;
+ __u32 r17;
+ __u32 r18;
+ /* non-volatile registers */
+ __u32 r19;
+ __u32 r20;
+ __u32 r21;
+ __u32 r22;
+ __u32 r23;
+ __u32 r24;
+ __u32 r25;
+ __u32 r26;
+ __u32 r27;
+ __u32 r28;
+ __u32 r29;
+ __u32 r30;
+ /* r31 is used as current task pointer */
+ /* special purpose registers */
+ __u32 msr;
+ __u32 ear;
+ __u32 esr;
+ __u32 fsr;
+};
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ unsigned long status; /* thread-synchronous flags */
+ __u32 cpu; /* current CPU */
+ __s32 preempt_count; /* 0 => preemptable,< 0 => BUG*/
+ mm_segment_t addr_limit; /* thread address space */
+ struct restart_block restart_block;
+
+ struct cpu_context cpu_context;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ register unsigned long sp asm("r1");
+
+ return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+/* thread information allocation */
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may
+ * need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+/* restore singlestep on return to user mode */
+#define TIF_SINGLESTEP 4
+#define TIF_IRET 5 /* return with iret */
+#define TIF_MEMDIE 6
+#define TIF_FREEZE 14 /* Freezing for suspend */
+
+/* FIXME change in entry.S */
+#define TIF_KERNEL_TRACE 8 /* kernel trace active */
+
+/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_POLLING_NRFLAG 16
+
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
+#define _TIF_IRET (1<<TIF_IRET)
+#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE (1<<TIF_FREEZE)
+#define _TIF_KERNEL_TRACE (1 << TIF_KERNEL_TRACE)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK 0x0000FFFE
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK 0x0000FFFF
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+/* FPU was used by this task this quantum (SMP) */
+#define TS_USEDFPU 0x0001
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TIMEX_H
+#define _ASM_MICROBLAZE_TIMEX_H
+
+#define CLOCK_TICK_RATE 1000 /* Timer input freq. */
+
+typedef unsigned long cycles_t;
+
+#define get_cycles() (0)
+
+#endif /* _ASM_TIMEX_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TLB_H
+#define _ASM_MICROBLAZE_TLB_H
+
+#define tlb_flush(tlb) do {} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_MICROBLAZE_TLB_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
+#define _ASM_MICROBLAZE_TLBFLUSH_H
+
+#define flush_tlb() BUG()
+#define flush_tlb_all() BUG()
+#define flush_tlb_mm(mm) BUG()
+#define flush_tlb_page(vma, addr) BUG()
+#define flush_tlb_range(mm, start, end) BUG()
+#define flush_tlb_pgtables(mm, start, end) BUG()
+#define flush_tlb_kernel_range(start, end) BUG()
+
+#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
--- /dev/null
+#include <asm-generic/topology.h>
+
+#ifndef _ASM_MICROBLAZE_TOPOLOGY_H
+#define _ASM_MICROBLAZE_TOPOLOGY_H
+
+struct device_node;
+static inline int of_node_to_nid(struct device_node *device)
+{
+ return 0;
+}
+#endif /* _ASM_MICROBLAZE_TOPOLOGY_H */
--- /dev/null
+/*
+ * Copyright (C) Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_TYPES_H
+#define _ASM_MICROBLAZE_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue. However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#include <asm-generic/int-ll64.h>
+
+# ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+# ifdef __KERNEL__
+# define BITS_PER_LONG 32
+
+/* Dma addresses are 32-bits wide. */
+
+typedef u32 dma_addr_t;
+
+# endif/* __KERNEL__ */
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_MICROBLAZE_TYPES_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UACCESS_H
+#define _ASM_MICROBLAZE_UACCESS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/sched.h> /* RLIMIT_FSIZE */
+#include <linux/mm.h>
+
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/segment.h>
+#include <linux/string.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+extern int ___range_ok(unsigned long addr, unsigned long size);
+
+#define __range_ok(addr, size) \
+ ___range_ok((unsigned long)(addr), (unsigned long)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
+
+extern inline int bad_user_access_length(void)
+{
+ return 0;
+}
+/* FIXME this is function for optimalization -> memcpy */
+#define __get_user(var, ptr) \
+ ({ \
+ int __gu_err = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ (var) = *(ptr); \
+ break; \
+ case 8: \
+ memcpy((void *) &(var), (ptr), 8); \
+ break; \
+ default: \
+ (var) = 0; \
+ __gu_err = __get_user_bad(); \
+ break; \
+ } \
+ __gu_err; \
+ })
+
+#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
+
+#define __put_user(var, ptr) \
+ ({ \
+ int __pu_err = 0; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ case 2: \
+ case 4: \
+ *(ptr) = (var); \
+ break; \
+ case 8: { \
+ typeof(*(ptr)) __pu_val = var; \
+ memcpy(ptr, &__pu_val, sizeof(__pu_val));\
+ } \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+ })
+
+#define __put_user_bad() (bad_user_access_length(), (-EFAULT))
+
+#define put_user(x, ptr) __put_user(x, ptr)
+#define get_user(x, ptr) __get_user(x, ptr)
+
+#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
+#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
+
+#define __copy_to_user(to, from, n) (copy_to_user(to, from, n))
+#define __copy_from_user(to, from, n) (copy_from_user(to, from, n))
+#define __copy_to_user_inatomic(to, from, n) (__copy_to_user(to, from, n))
+#define __copy_from_user_inatomic(to, from, n) (__copy_from_user(to, from, n))
+
+#define __clear_user(addr, n) (memset((void *)addr, 0, n), 0)
+
+static inline unsigned long clear_user(void *addr, unsigned long size)
+{
+ if (access_ok(VERIFY_WRITE, addr, size))
+ size = __clear_user(addr, size);
+ return size;
+}
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern unsigned long search_exception_table(unsigned long);
+
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_MICROBLAZE_UACCESS_H */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UCONTEXT_H
+#define _ASM_MICROBLAZE_UCONTEXT_H
+
+#include <asm/sigcontext.h>
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_MICROBLAZE_UCONTEXT_H */
--- /dev/null
+/*
+ * Copyright (C) 2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UNALIGNED_H
+#define _ASM_MICROBLAZE_UNALIGNED_H
+
+# ifdef __KERNEL__
+
+# include <linux/unaligned/access_ok.h>
+# include <linux/unaligned/generic.h>
+
+# define get_unaligned __get_unaligned_be
+# define put_unaligned __put_unaligned_be
+
+# endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_UNALIGNED_H */
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_MICROBLAZE_UNISTD_H
+#define _ASM_MICROBLAZE_UNISTD_H
+
+#define __NR_restart_syscall 0 /* ok */
+#define __NR_exit 1 /* ok */
+#define __NR_fork 2 /* not for no MMU - weird */
+#define __NR_read 3 /* ok */
+#define __NR_write 4 /* ok */
+#define __NR_open 5 /* openat */
+#define __NR_close 6 /* ok */
+#define __NR_waitpid 7 /* waitid */
+#define __NR_creat 8 /* openat */
+#define __NR_link 9 /* linkat */
+#define __NR_unlink 10 /* unlinkat */
+#define __NR_execve 11 /* ok */
+#define __NR_chdir 12 /* ok */
+#define __NR_time 13 /* obsolete -> sys_gettimeofday */
+#define __NR_mknod 14 /* mknodat */
+#define __NR_chmod 15 /* fchmodat */
+#define __NR_lchown 16 /* ok */
+#define __NR_break 17 /* don't know */
+#define __NR_oldstat 18 /* remove */
+#define __NR_lseek 19 /* ok */
+#define __NR_getpid 20 /* ok */
+#define __NR_mount 21 /* ok */
+#define __NR_umount 22 /* ok */ /* use only umount2 */
+#define __NR_setuid 23 /* ok */
+#define __NR_getuid 24 /* ok */
+#define __NR_stime 25 /* obsolete -> sys_settimeofday */
+#define __NR_ptrace 26 /* ok */
+#define __NR_alarm 27 /* obsolete -> sys_setitimer */
+#define __NR_oldfstat 28 /* remove */
+#define __NR_pause 29 /* obsolete -> sys_rt_sigtimedwait */
+#define __NR_utime 30 /* obsolete -> sys_utimesat */
+#define __NR_stty 31 /* remove */
+#define __NR_gtty 32 /* remove */
+#define __NR_access 33 /* faccessat */
+/* can be implemented by sys_setpriority */
+#define __NR_nice 34
+#define __NR_ftime 35 /* remove */
+#define __NR_sync 36 /* ok */
+#define __NR_kill 37 /* ok */
+#define __NR_rename 38 /* renameat */
+#define __NR_mkdir 39 /* mkdirat */
+#define __NR_rmdir 40 /* unlinkat */
+#define __NR_dup 41 /* ok */
+#define __NR_pipe 42 /* ok */
+#define __NR_times 43 /* ok */
+#define __NR_prof 44 /* remove */
+#define __NR_brk 45 /* ok -mmu, nommu specific */
+#define __NR_setgid 46 /* ok */
+#define __NR_getgid 47 /* ok */
+#define __NR_signal 48 /* obsolete -> sys_rt_sigaction */
+#define __NR_geteuid 49 /* ok */
+#define __NR_getegid 50 /* ok */
+#define __NR_acct 51 /* add it and then I can disable it */
+#define __NR_umount2 52 /* remove */
+#define __NR_lock 53 /* remove */
+#define __NR_ioctl 54 /* ok */
+#define __NR_fcntl 55 /* ok -> 64bit version*/
+#define __NR_mpx 56 /* remove */
+#define __NR_setpgid 57 /* ok */
+#define __NR_ulimit 58 /* remove */
+#define __NR_oldolduname 59 /* remove */
+#define __NR_umask 60 /* ok */
+#define __NR_chroot 61 /* ok */
+#define __NR_ustat 62 /* obsolete -> statfs64 */
+#define __NR_dup2 63 /* ok */
+#define __NR_getppid 64 /* ok */
+#define __NR_getpgrp 65 /* obsolete -> sys_getpgid */
+#define __NR_setsid 66 /* ok */
+#define __NR_sigaction 67 /* obsolete -> rt_sigaction */
+#define __NR_sgetmask 68 /* obsolete -> sys_rt_sigprocmask */
+#define __NR_ssetmask 69 /* obsolete ->sys_rt_sigprocmask */
+#define __NR_setreuid 70 /* ok */
+#define __NR_setregid 71 /* ok */
+#define __NR_sigsuspend 72 /* obsolete -> rt_sigsuspend */
+#define __NR_sigpending 73 /* obsolete -> sys_rt_sigpending */
+#define __NR_sethostname 74 /* ok */
+#define __NR_setrlimit 75 /* ok */
+#define __NR_getrlimit 76 /* ok Back compatible 2G limited rlimit */
+#define __NR_getrusage 77 /* ok */
+#define __NR_gettimeofday 78 /* ok */
+#define __NR_settimeofday 79 /* ok */
+#define __NR_getgroups 80 /* ok */
+#define __NR_setgroups 81 /* ok */
+#define __NR_select 82 /* obsolete -> sys_pselect7 */
+#define __NR_symlink 83 /* symlinkat */
+#define __NR_oldlstat 84 /* remove */
+#define __NR_readlink 85 /* obsolete -> sys_readlinkat */
+#define __NR_uselib 86 /* remove */
+#define __NR_swapon 87 /* ok */
+#define __NR_reboot 88 /* ok */
+#define __NR_readdir 89 /* remove ? */
+#define __NR_mmap 90 /* obsolete -> sys_mmap2 */
+#define __NR_munmap 91 /* ok - mmu and nommu */
+#define __NR_truncate 92 /* ok or truncate64 */
+#define __NR_ftruncate 93 /* ok or ftruncate64 */
+#define __NR_fchmod 94 /* ok */
+#define __NR_fchown 95 /* ok */
+#define __NR_getpriority 96 /* ok */
+#define __NR_setpriority 97 /* ok */
+#define __NR_profil 98 /* remove */
+#define __NR_statfs 99 /* ok or statfs64 */
+#define __NR_fstatfs 100 /* ok or fstatfs64 */
+#define __NR_ioperm 101 /* remove */
+#define __NR_socketcall 102 /* remove */
+#define __NR_syslog 103 /* ok */
+#define __NR_setitimer 104 /* ok */
+#define __NR_getitimer 105 /* ok */
+#define __NR_stat 106 /* remove */
+#define __NR_lstat 107 /* remove */
+#define __NR_fstat 108 /* remove */
+#define __NR_olduname 109 /* remove */
+#define __NR_iopl 110 /* remove */
+#define __NR_vhangup 111 /* ok */
+#define __NR_idle 112 /* remove */
+#define __NR_vm86old 113 /* remove */
+#define __NR_wait4 114 /* obsolete -> waitid */
+#define __NR_swapoff 115 /* ok */
+#define __NR_sysinfo 116 /* ok */
+#define __NR_ipc 117 /* remove - direct call */
+#define __NR_fsync 118 /* ok */
+#define __NR_sigreturn 119 /* obsolete -> sys_rt_sigreturn */
+#define __NR_clone 120 /* ok */
+#define __NR_setdomainname 121 /* ok */
+#define __NR_uname 122 /* remove */
+#define __NR_modify_ldt 123 /* remove */
+#define __NR_adjtimex 124 /* ok */
+#define __NR_mprotect 125 /* remove */
+#define __NR_sigprocmask 126 /* obsolete -> sys_rt_sigprocmask */
+#define __NR_create_module 127 /* remove */
+#define __NR_init_module 128 /* ok */
+#define __NR_delete_module 129 /* ok */
+#define __NR_get_kernel_syms 130 /* remove */
+#define __NR_quotactl 131 /* ok */
+#define __NR_getpgid 132 /* ok */
+#define __NR_fchdir 133 /* ok */
+#define __NR_bdflush 134 /* remove */
+#define __NR_sysfs 135 /* needed for busybox */
+#define __NR_personality 136 /* ok */
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138 /* ok */
+#define __NR_setfsgid 139 /* ok */
+#define __NR__llseek 140 /* remove only lseek */
+#define __NR_getdents 141 /* ok or getdents64 */
+#define __NR__newselect 142 /* remove */
+#define __NR_flock 143 /* ok */
+#define __NR_msync 144 /* remove */
+#define __NR_readv 145 /* ok */
+#define __NR_writev 146 /* ok */
+#define __NR_getsid 147 /* ok */
+#define __NR_fdatasync 148 /* ok */
+#define __NR__sysctl 149 /* remove */
+#define __NR_mlock 150 /* ok - nommu or mmu */
+#define __NR_munlock 151 /* ok - nommu or mmu */
+#define __NR_mlockall 152 /* ok - nommu or mmu */
+#define __NR_munlockall 153 /* ok - nommu or mmu */
+#define __NR_sched_setparam 154 /* ok */
+#define __NR_sched_getparam 155 /* ok */
+#define __NR_sched_setscheduler 156 /* ok */
+#define __NR_sched_getscheduler 157 /* ok */
+#define __NR_sched_yield 158 /* ok */
+#define __NR_sched_get_priority_max 159 /* ok */
+#define __NR_sched_get_priority_min 160 /* ok */
+#define __NR_sched_rr_get_interval 161 /* ok */
+#define __NR_nanosleep 162 /* ok */
+#define __NR_mremap 163 /* ok - nommu or mmu */
+#define __NR_setresuid 164 /* ok */
+#define __NR_getresuid 165 /* ok */
+#define __NR_vm86 166 /* remove */
+#define __NR_query_module 167 /* ok */
+#define __NR_poll 168 /* obsolete -> sys_ppoll */
+#define __NR_nfsservctl 169 /* ok */
+#define __NR_setresgid 170 /* ok */
+#define __NR_getresgid 171 /* ok */
+#define __NR_prctl 172 /* ok */
+#define __NR_rt_sigreturn 173 /* ok */
+#define __NR_rt_sigaction 174 /* ok */
+#define __NR_rt_sigprocmask 175 /* ok */
+#define __NR_rt_sigpending 176 /* ok */
+#define __NR_rt_sigtimedwait 177 /* ok */
+#define __NR_rt_sigqueueinfo 178 /* ok */
+#define __NR_rt_sigsuspend 179 /* ok */
+#define __NR_pread64 180 /* ok */
+#define __NR_pwrite64 181 /* ok */
+#define __NR_chown 182 /* obsolete -> fchownat */
+#define __NR_getcwd 183 /* ok */
+#define __NR_capget 184 /* ok */
+#define __NR_capset 185 /* ok */
+#define __NR_sigaltstack 186 /* remove */
+#define __NR_sendfile 187 /* ok -> exist 64bit version*/
+#define __NR_getpmsg 188 /* remove */
+/* remove - some people actually want streams */
+#define __NR_putpmsg 189
+/* for noMMU - group with clone -> maybe remove */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191 /* remove - SuS compliant getrlimit */
+#define __NR_mmap2 192 /* ok */
+#define __NR_truncate64 193 /* ok */
+#define __NR_ftruncate64 194 /* ok */
+#define __NR_stat64 195 /* remove _ARCH_WANT_STAT64 */
+#define __NR_lstat64 196 /* remove _ARCH_WANT_STAT64 */
+#define __NR_fstat64 197 /* remove _ARCH_WANT_STAT64 */
+#define __NR_lchown32 198 /* ok - without 32 */
+#define __NR_getuid32 199 /* ok - without 32 */
+#define __NR_getgid32 200 /* ok - without 32 */
+#define __NR_geteuid32 201 /* ok - without 32 */
+#define __NR_getegid32 202 /* ok - without 32 */
+#define __NR_setreuid32 203 /* ok - without 32 */
+#define __NR_setregid32 204 /* ok - without 32 */
+#define __NR_getgroups32 205 /* ok - without 32 */
+#define __NR_setgroups32 206 /* ok - without 32 */
+#define __NR_fchown32 207 /* ok - without 32 */
+#define __NR_setresuid32 208 /* ok - without 32 */
+#define __NR_getresuid32 209 /* ok - without 32 */
+#define __NR_setresgid32 210 /* ok - without 32 */
+#define __NR_getresgid32 211 /* ok - without 32 */
+#define __NR_chown32 212 /* ok - without 32 -obsolete -> fchownat */
+#define __NR_setuid32 213 /* ok - without 32 */
+#define __NR_setgid32 214 /* ok - without 32 */
+#define __NR_setfsuid32 215 /* ok - without 32 */
+#define __NR_setfsgid32 216 /* ok - without 32 */
+#define __NR_pivot_root 217 /* ok */
+#define __NR_mincore 218 /* ok */
+#define __NR_madvise 219 /* ok */
+#define __NR_getdents64 220 /* ok */
+#define __NR_fcntl64 221 /* ok */
+/* 223 is unused */
+#define __NR_gettid 224 /* ok */
+#define __NR_readahead 225 /* ok */
+#define __NR_setxattr 226 /* ok */
+#define __NR_lsetxattr 227 /* ok */
+#define __NR_fsetxattr 228 /* ok */
+#define __NR_getxattr 229 /* ok */
+#define __NR_lgetxattr 230 /* ok */
+#define __NR_fgetxattr 231 /* ok */
+#define __NR_listxattr 232 /* ok */
+#define __NR_llistxattr 233 /* ok */
+#define __NR_flistxattr 234 /* ok */
+#define __NR_removexattr 235 /* ok */
+#define __NR_lremovexattr 236 /* ok */
+#define __NR_fremovexattr 237 /* ok */
+#define __NR_tkill 238 /* ok */
+#define __NR_sendfile64 239 /* ok */
+#define __NR_futex 240 /* ok */
+#define __NR_sched_setaffinity 241 /* ok */
+#define __NR_sched_getaffinity 242 /* ok */
+#define __NR_set_thread_area 243 /* remove */
+#define __NR_get_thread_area 244 /* remove */
+#define __NR_io_setup 245 /* ok */
+#define __NR_io_destroy 246 /* ok */
+#define __NR_io_getevents 247 /* ok */
+#define __NR_io_submit 248 /* ok */
+#define __NR_io_cancel 249 /* ok */
+#define __NR_fadvise64 250 /* remove -> sys_fadvise64_64 */
+/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */
+#define __NR_exit_group 252 /* ok */
+#define __NR_lookup_dcookie 253 /* ok */
+#define __NR_epoll_create 254 /* ok */
+#define __NR_epoll_ctl 255 /* ok */
+#define __NR_epoll_wait 256 /* obsolete -> sys_epoll_pwait */
+#define __NR_remap_file_pages 257 /* only for mmu */
+#define __NR_set_tid_address 258 /* ok */
+#define __NR_timer_create 259 /* ok */
+#define __NR_timer_settime (__NR_timer_create+1) /* 260 */ /* ok */
+#define __NR_timer_gettime (__NR_timer_create+2) /* 261 */ /* ok */
+#define __NR_timer_getoverrun (__NR_timer_create+3) /* 262 */ /* ok */
+#define __NR_timer_delete (__NR_timer_create+4) /* 263 */ /* ok */
+#define __NR_clock_settime (__NR_timer_create+5) /* 264 */ /* ok */
+#define __NR_clock_gettime (__NR_timer_create+6) /* 265 */ /* ok */
+#define __NR_clock_getres (__NR_timer_create+7) /* 266 */ /* ok */
+#define __NR_clock_nanosleep (__NR_timer_create+8) /* 267 */ /* ok */
+#define __NR_statfs64 268 /* ok */
+#define __NR_fstatfs64 269 /* ok */
+#define __NR_tgkill 270 /* ok */
+#define __NR_utimes 271 /* obsolete -> sys_futimesat */
+#define __NR_fadvise64_64 272 /* ok */
+#define __NR_vserver 273 /* ok */
+#define __NR_mbind 274 /* only for mmu */
+#define __NR_get_mempolicy 275 /* only for mmu */
+#define __NR_set_mempolicy 276 /* only for mmu */
+#define __NR_mq_open 277 /* ok */
+#define __NR_mq_unlink (__NR_mq_open+1) /* 278 */ /* ok */
+#define __NR_mq_timedsend (__NR_mq_open+2) /* 279 */ /* ok */
+#define __NR_mq_timedreceive (__NR_mq_open+3) /* 280 */ /* ok */
+#define __NR_mq_notify (__NR_mq_open+4) /* 281 */ /* ok */
+#define __NR_mq_getsetattr (__NR_mq_open+5) /* 282 */ /* ok */
+#define __NR_kexec_load 283 /* ok */
+#define __NR_waitid 284 /* ok */
+/* #define __NR_sys_setaltroot 285 */
+#define __NR_add_key 286 /* ok */
+#define __NR_request_key 287 /* ok */
+#define __NR_keyctl 288 /* ok */
+#define __NR_ioprio_set 289 /* ok */
+#define __NR_ioprio_get 290 /* ok */
+#define __NR_inotify_init 291 /* ok */
+#define __NR_inotify_add_watch 292 /* ok */
+#define __NR_inotify_rm_watch 293 /* ok */
+#define __NR_migrate_pages 294 /* mmu */
+#define __NR_openat 295 /* ok */
+#define __NR_mkdirat 296 /* ok */
+#define __NR_mknodat 297 /* ok */
+#define __NR_fchownat 298 /* ok */
+#define __NR_futimesat 299 /* obsolete -> sys_utimesat */
+#define __NR_fstatat64 300 /* stat64 */
+#define __NR_unlinkat 301 /* ok */
+#define __NR_renameat 302 /* ok */
+#define __NR_linkat 303 /* ok */
+#define __NR_symlinkat 304 /* ok */
+#define __NR_readlinkat 305 /* ok */
+#define __NR_fchmodat 306 /* ok */
+#define __NR_faccessat 307 /* ok */
+#define __NR_pselect6 308 /* obsolete -> sys_pselect7 */
+#define __NR_ppoll 309 /* ok */
+#define __NR_unshare 310 /* ok */
+#define __NR_set_robust_list 311 /* ok */
+#define __NR_get_robust_list 312 /* ok */
+#define __NR_splice 313 /* ok */
+#define __NR_sync_file_range 314 /* ok */
+#define __NR_tee 315 /* ok */
+#define __NR_vmsplice 316 /* ok */
+#define __NR_move_pages 317 /* mmu */
+#define __NR_getcpu 318 /* ok */
+#define __NR_epoll_pwait 319 /* ok */
+#define __NR_utimensat 320 /* ok */
+#define __NR_signalfd 321 /* ok */
+#define __NR_timerfd_create 322 /* ok */
+#define __NR_eventfd 323 /* ok */
+#define __NR_fallocate 324 /* ok */
+#define __NR_semtimedop 325 /* ok - semaphore group */
+#define __NR_timerfd_settime 326 /* ok */
+#define __NR_timerfd_gettime 327 /* ok */
+/* sysv ipc syscalls */
+#define __NR_semctl 328 /* ok */
+#define __NR_semget 329 /* ok */
+#define __NR_semop 330 /* ok */
+#define __NR_msgctl 331 /* ok */
+#define __NR_msgget 332 /* ok */
+#define __NR_msgrcv 333 /* ok */
+#define __NR_msgsnd 334 /* ok */
+#define __NR_shmat 335 /* ok */
+#define __NR_shmctl 336 /* ok */
+#define __NR_shmdt 337 /* ok */
+#define __NR_shmget 338 /* ok */
+
+
+#define __NR_signalfd4 339 /* new */
+#define __NR_eventfd2 340 /* new */
+#define __NR_epoll_create1 341 /* new */
+#define __NR_dup3 342 /* new */
+#define __NR_pipe2 343 /* new */
+#define __NR_inotify_init1 344 /* new */
+#define __NR_socket 345 /* new */
+#define __NR_socketpair 346 /* new */
+#define __NR_bind 347 /* new */
+#define __NR_listen 348 /* new */
+#define __NR_accept 349 /* new */
+#define __NR_connect 350 /* new */
+#define __NR_getsockname 351 /* new */
+#define __NR_getpeername 352 /* new */
+#define __NR_sendto 353 /* new */
+#define __NR_send 354 /* new */
+#define __NR_recvfrom 355 /* new */
+#define __NR_recv 356 /* new */
+#define __NR_setsockopt 357 /* new */
+#define __NR_getsockopt 358 /* new */
+#define __NR_shutdown 359 /* new */
+#define __NR_sendmsg 360 /* new */
+#define __NR_recvmsg 361 /* new */
+#define __NR_accept04 362 /* new */
+#define __NR_preadv 363 /* new */
+#define __NR_pwritev 364 /* new */
+
+#define __NR_syscalls 365
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+/* #define __ARCH_WANT_OLD_READDIR */
+/* #define __ARCH_WANT_OLD_STAT */
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+/* #define __ARCH_WANT_SYS_RT_SIGSUSPEND */
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_MICROBLAZE_UNISTD_H */
--- /dev/null
+#include <asm-generic/xor.h>
--- /dev/null
+#
+# Makefile
+#
+
+extra-y := head.o vmlinux.lds
+
+obj-y += exceptions.o \
+ hw_exception_handler.o init_task.o intc.o irq.o of_device.o \
+ of_platform.o process.o prom.o prom_parse.o ptrace.o \
+ setup.o signal.o sys_microblaze.o timer.o traps.o
+
+obj-y += cpu/
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_SELFMOD) += selfmod.o
+obj-$(CONFIG_HEART_BEAT) += heartbeat.o
+obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
+
+obj-y += entry$(MMUEXT).o
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+
+int main(int argc, char *argv[])
+{
+ /* struct pt_regs */
+ DEFINE(PT_SIZE, sizeof(struct pt_regs));
+ DEFINE(PT_MSR, offsetof(struct pt_regs, msr));
+ DEFINE(PT_EAR, offsetof(struct pt_regs, ear));
+ DEFINE(PT_ESR, offsetof(struct pt_regs, esr));
+ DEFINE(PT_FSR, offsetof(struct pt_regs, fsr));
+ DEFINE(PT_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_R0, offsetof(struct pt_regs, r0));
+ DEFINE(PT_R1, offsetof(struct pt_regs, r1));
+ DEFINE(PT_R2, offsetof(struct pt_regs, r2));
+ DEFINE(PT_R3, offsetof(struct pt_regs, r3));
+ DEFINE(PT_R4, offsetof(struct pt_regs, r4));
+ DEFINE(PT_R5, offsetof(struct pt_regs, r5));
+ DEFINE(PT_R6, offsetof(struct pt_regs, r6));
+ DEFINE(PT_R7, offsetof(struct pt_regs, r7));
+ DEFINE(PT_R8, offsetof(struct pt_regs, r8));
+ DEFINE(PT_R9, offsetof(struct pt_regs, r9));
+ DEFINE(PT_R10, offsetof(struct pt_regs, r10));
+ DEFINE(PT_R11, offsetof(struct pt_regs, r11));
+ DEFINE(PT_R12, offsetof(struct pt_regs, r12));
+ DEFINE(PT_R13, offsetof(struct pt_regs, r13));
+ DEFINE(PT_R14, offsetof(struct pt_regs, r14));
+ DEFINE(PT_R15, offsetof(struct pt_regs, r15));
+ DEFINE(PT_R16, offsetof(struct pt_regs, r16));
+ DEFINE(PT_R17, offsetof(struct pt_regs, r17));
+ DEFINE(PT_R18, offsetof(struct pt_regs, r18));
+ DEFINE(PT_R19, offsetof(struct pt_regs, r19));
+ DEFINE(PT_R20, offsetof(struct pt_regs, r20));
+ DEFINE(PT_R21, offsetof(struct pt_regs, r21));
+ DEFINE(PT_R22, offsetof(struct pt_regs, r22));
+ DEFINE(PT_R23, offsetof(struct pt_regs, r23));
+ DEFINE(PT_R24, offsetof(struct pt_regs, r24));
+ DEFINE(PT_R25, offsetof(struct pt_regs, r25));
+ DEFINE(PT_R26, offsetof(struct pt_regs, r26));
+ DEFINE(PT_R27, offsetof(struct pt_regs, r27));
+ DEFINE(PT_R28, offsetof(struct pt_regs, r28));
+ DEFINE(PT_R29, offsetof(struct pt_regs, r29));
+ DEFINE(PT_R30, offsetof(struct pt_regs, r30));
+ DEFINE(PT_R31, offsetof(struct pt_regs, r31));
+ DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
+ BLANK();
+
+ /* Magic offsets for PTRACE PEEK/POKE etc */
+ DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs) + 1);
+ DEFINE(PT_TEXT_LEN, sizeof(struct pt_regs) + 2);
+ DEFINE(PT_DATA_ADDR, sizeof(struct pt_regs) + 3);
+ BLANK();
+
+ /* struct task_struct */
+ DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
+
+ /* struct thread_info */
+ DEFINE(TI_TASK, offsetof(struct thread_info, task));
+ DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
+ DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+ DEFINE(TI_STATUS, offsetof(struct thread_info, status));
+ DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
+ DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
+ DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
+ DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
+ DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
+ BLANK();
+
+ /* struct cpu_context */
+ DEFINE(CC_R1, offsetof(struct cpu_context, r1)); /* r1 */
+ DEFINE(CC_R2, offsetof(struct cpu_context, r2));
+ /* dedicated registers */
+ DEFINE(CC_R13, offsetof(struct cpu_context, r13));
+ DEFINE(CC_R14, offsetof(struct cpu_context, r14));
+ DEFINE(CC_R15, offsetof(struct cpu_context, r15));
+ DEFINE(CC_R16, offsetof(struct cpu_context, r16));
+ DEFINE(CC_R17, offsetof(struct cpu_context, r17));
+ DEFINE(CC_R18, offsetof(struct cpu_context, r18));
+ /* non-volatile registers */
+ DEFINE(CC_R19, offsetof(struct cpu_context, r19));
+ DEFINE(CC_R20, offsetof(struct cpu_context, r20));
+ DEFINE(CC_R21, offsetof(struct cpu_context, r21));
+ DEFINE(CC_R22, offsetof(struct cpu_context, r22));
+ DEFINE(CC_R23, offsetof(struct cpu_context, r23));
+ DEFINE(CC_R24, offsetof(struct cpu_context, r24));
+ DEFINE(CC_R25, offsetof(struct cpu_context, r25));
+ DEFINE(CC_R26, offsetof(struct cpu_context, r26));
+ DEFINE(CC_R27, offsetof(struct cpu_context, r27));
+ DEFINE(CC_R28, offsetof(struct cpu_context, r28));
+ DEFINE(CC_R29, offsetof(struct cpu_context, r29));
+ DEFINE(CC_R30, offsetof(struct cpu_context, r30));
+ /* special purpose registers */
+ DEFINE(CC_MSR, offsetof(struct cpu_context, msr));
+ DEFINE(CC_EAR, offsetof(struct cpu_context, ear));
+ DEFINE(CC_ESR, offsetof(struct cpu_context, esr));
+ DEFINE(CC_FSR, offsetof(struct cpu_context, fsr));
+ BLANK();
+
+ return 0;
+}
--- /dev/null
+#
+# Build the appropriate CPU version support
+#
+
+EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \
+ -DCPU_REV=$(CPU_REV)
+
+obj-y += cache.o cpuinfo.o cpuinfo-pvr-full.o cpuinfo-static.o mb.o pvr.o
--- /dev/null
+/*
+ * Cache control for MicroBlaze cache memories
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <asm/cacheflush.h>
+#include <linux/cache.h>
+#include <asm/cpuinfo.h>
+
+/* Exported functions */
+
+void _enable_icache(void)
+{
+ if (cpuinfo.use_icache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ __asm__ __volatile__ (" \
+ msrset r0, %0; \
+ nop; " \
+ : \
+ : "i" (MSR_ICE) \
+ : "memory");
+#else
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ ori r12, r12, %0; \
+ mts rmsr, r12; \
+ nop; " \
+ : \
+ : "i" (MSR_ICE) \
+ : "memory", "r12");
+#endif
+ }
+}
+
+void _disable_icache(void)
+{
+ if (cpuinfo.use_icache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ __asm__ __volatile__ (" \
+ msrclr r0, %0; \
+ nop; " \
+ : \
+ : "i" (MSR_ICE) \
+ : "memory");
+#else
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ andi r12, r12, ~%0; \
+ mts rmsr, r12; \
+ nop; " \
+ : \
+ : "i" (MSR_ICE) \
+ : "memory", "r12");
+#endif
+ }
+}
+
+void _invalidate_icache(unsigned int addr)
+{
+ if (cpuinfo.use_icache) {
+ __asm__ __volatile__ (" \
+ wic %0, r0" \
+ : \
+ : "r" (addr));
+ }
+}
+
+void _enable_dcache(void)
+{
+ if (cpuinfo.use_dcache) {
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ __asm__ __volatile__ (" \
+ msrset r0, %0; \
+ nop; " \
+ : \
+ : "i" (MSR_DCE) \
+ : "memory");
+#else
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ ori r12, r12, %0; \
+ mts rmsr, r12; \
+ nop; " \
+ : \
+ : "i" (MSR_DCE) \
+ : "memory", "r12");
+#endif
+ }
+}
+
+void _disable_dcache(void)
+{
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ __asm__ __volatile__ (" \
+ msrclr r0, %0; \
+ nop; " \
+ : \
+ : "i" (MSR_DCE) \
+ : "memory");
+#else
+ __asm__ __volatile__ (" \
+ mfs r12, rmsr; \
+ nop; \
+ andi r12, r12, ~%0; \
+ mts rmsr, r12; \
+ nop; " \
+ : \
+ : "i" (MSR_DCE) \
+ : "memory", "r12");
+#endif
+}
+
+void _invalidate_dcache(unsigned int addr)
+{
+ __asm__ __volatile__ (" \
+ wdc %0, r0" \
+ : \
+ : "r" (addr));
+}
+
+void __invalidate_icache_all(void)
+{
+ unsigned int i;
+ unsigned flags;
+
+ if (cpuinfo.use_icache) {
+ local_irq_save(flags);
+ __disable_icache();
+
+ /* Just loop through cache size and invalidate, no need to add
+ CACHE_BASE address */
+ for (i = 0; i < cpuinfo.icache_size;
+ i += cpuinfo.icache_line)
+ __invalidate_icache(i);
+
+ __enable_icache();
+ local_irq_restore(flags);
+ }
+}
+
+void __invalidate_icache_range(unsigned long start, unsigned long end)
+{
+ unsigned int i;
+ unsigned flags;
+ unsigned int align;
+
+ if (cpuinfo.use_icache) {
+ /*
+ * No need to cover entire cache range,
+ * just cover cache footprint
+ */
+ end = min(start + cpuinfo.icache_size, end);
+ align = ~(cpuinfo.icache_line - 1);
+ start &= align; /* Make sure we are aligned */
+ /* Push end up to the next cache line */
+ end = ((end & align) + cpuinfo.icache_line);
+
+ local_irq_save(flags);
+ __disable_icache();
+
+ for (i = start; i < end; i += cpuinfo.icache_line)
+ __invalidate_icache(i);
+
+ __enable_icache();
+ local_irq_restore(flags);
+ }
+}
+
+void __invalidate_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ __invalidate_icache_all();
+}
+
+void __invalidate_icache_user_range(struct vm_area_struct *vma,
+ struct page *page, unsigned long adr,
+ int len)
+{
+ __invalidate_icache_all();
+}
+
+void __invalidate_cache_sigtramp(unsigned long addr)
+{
+ __invalidate_icache_range(addr, addr + 8);
+}
+
+void __invalidate_dcache_all(void)
+{
+ unsigned int i;
+ unsigned flags;
+
+ if (cpuinfo.use_dcache) {
+ local_irq_save(flags);
+ __disable_dcache();
+
+ /*
+ * Just loop through cache size and invalidate,
+ * no need to add CACHE_BASE address
+ */
+ for (i = 0; i < cpuinfo.dcache_size;
+ i += cpuinfo.dcache_line)
+ __invalidate_dcache(i);
+
+ __enable_dcache();
+ local_irq_restore(flags);
+ }
+}
+
+void __invalidate_dcache_range(unsigned long start, unsigned long end)
+{
+ unsigned int i;
+ unsigned flags;
+ unsigned int align;
+
+ if (cpuinfo.use_dcache) {
+ /*
+ * No need to cover entire cache range,
+ * just cover cache footprint
+ */
+ end = min(start + cpuinfo.dcache_size, end);
+ align = ~(cpuinfo.dcache_line - 1);
+ start &= align; /* Make sure we are aligned */
+ /* Push end up to the next cache line */
+ end = ((end & align) + cpuinfo.dcache_line);
+ local_irq_save(flags);
+ __disable_dcache();
+
+ for (i = start; i < end; i += cpuinfo.dcache_line)
+ __invalidate_dcache(i);
+
+ __enable_dcache();
+ local_irq_restore(flags);
+ }
+}
+
+void __invalidate_dcache_page(struct vm_area_struct *vma, struct page *page)
+{
+ __invalidate_dcache_all();
+}
+
+void __invalidate_dcache_user_range(struct vm_area_struct *vma,
+ struct page *page, unsigned long adr,
+ int len)
+{
+ __invalidate_dcache_all();
+}
--- /dev/null
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/pvr.h>
+#include <asm/cpuinfo.h>
+
+/*
+ * Helper macro to map between fields in our struct cpuinfo, and
+ * the PVR macros in pvr.h.
+ */
+
+#define CI(c, p) { ci->c = PVR_##p(pvr); }
+#define err_printk(x) \
+ early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+
+void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
+{
+ struct pvr_s pvr;
+ int temp; /* for saving temp value */
+ get_pvr(&pvr);
+
+ CI(ver_code, VERSION);
+ if (!ci->ver_code) {
+ printk(KERN_ERR "ERROR: MB has broken PVR regs "
+ "-> use DTS setting\n");
+ return;
+ }
+
+ temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\
+ PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
+ if (ci->use_instr != temp)
+ err_printk("BARREL, MSR, PCMP or DIV");
+ ci->use_instr = temp;
+
+ temp = PVR_USE_HW_MUL(pvr) | PVR_USE_MUL64(pvr);
+ if (ci->use_mult != temp)
+ err_printk("HW_MUL");
+ ci->use_mult = temp;
+
+ temp = PVR_USE_FPU(pvr) | PVR_USE_FPU2(pvr);
+ if (ci->use_fpu != temp)
+ err_printk("HW_FPU");
+ ci->use_fpu = temp;
+
+ ci->use_exc = PVR_OPCODE_0x0_ILLEGAL(pvr) |\
+ PVR_UNALIGNED_EXCEPTION(pvr) |\
+ PVR_ILL_OPCODE_EXCEPTION(pvr) |\
+ PVR_IOPB_BUS_EXCEPTION(pvr) |\
+ PVR_DOPB_BUS_EXCEPTION(pvr) |\
+ PVR_DIV_ZERO_EXCEPTION(pvr) |\
+ PVR_FPU_EXCEPTION(pvr) |\
+ PVR_FSL_EXCEPTION(pvr);
+
+ CI(pvr_user1, USER1);
+ CI(pvr_user2, USER2);
+
+ CI(mmu, USE_MMU);
+
+ CI(use_icache, USE_ICACHE);
+ CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
+ CI(icache_write, ICACHE_ALLOW_WR);
+ CI(icache_line, ICACHE_LINE_LEN);
+ CI(icache_size, ICACHE_BYTE_SIZE);
+ CI(icache_base, ICACHE_BASEADDR);
+ CI(icache_high, ICACHE_HIGHADDR);
+
+ CI(use_dcache, USE_DCACHE);
+ CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS);
+ CI(dcache_write, DCACHE_ALLOW_WR);
+ CI(dcache_line, DCACHE_LINE_LEN);
+ CI(dcache_size, DCACHE_BYTE_SIZE);
+ CI(dcache_base, DCACHE_BASEADDR);
+ CI(dcache_high, DCACHE_HIGHADDR);
+
+ CI(use_dopb, D_OPB);
+ CI(use_iopb, I_OPB);
+ CI(use_dlmb, D_LMB);
+ CI(use_ilmb, I_LMB);
+ CI(num_fsl, FSL_LINKS);
+
+ CI(irq_edge, INTERRUPT_IS_EDGE);
+ CI(irq_positive, EDGE_IS_POSITIVE);
+
+ CI(area_optimised, AREA_OPTIMISED);
+
+ CI(hw_debug, DEBUG_ENABLED);
+ CI(num_pc_brk, NUMBER_OF_PC_BRK);
+ CI(num_rd_brk, NUMBER_OF_RD_ADDR_BRK);
+ CI(num_wr_brk, NUMBER_OF_WR_ADDR_BRK);
+
+ CI(fpga_family_code, TARGET_FAMILY);
+
+ /* take timebase-frequency from DTS */
+ ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency");
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+
+#define err_printk(x) \
+ early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+
+void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
+{
+ int i = 0;
+
+ ci->use_instr =
+ (fcpu(cpu, "xlnx,use-barrel") ? PVR0_USE_BARREL_MASK : 0) |
+ (fcpu(cpu, "xlnx,use-msr-instr") ? PVR2_USE_MSR_INSTR : 0) |
+ (fcpu(cpu, "xlnx,use-pcmp-instr") ? PVR2_USE_PCMP_INSTR : 0) |
+ (fcpu(cpu, "xlnx,use-div") ? PVR0_USE_DIV_MASK : 0);
+ if (CONFIG_XILINX_MICROBLAZE0_USE_BARREL)
+ i |= PVR0_USE_BARREL_MASK;
+ if (CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR)
+ i |= PVR2_USE_MSR_INSTR;
+ if (CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR)
+ i |= PVR2_USE_PCMP_INSTR;
+ if (CONFIG_XILINX_MICROBLAZE0_USE_DIV)
+ i |= PVR0_USE_DIV_MASK;
+ if (ci->use_instr != i)
+ err_printk("BARREL, MSR, PCMP or DIV");
+
+ ci->use_mult = fcpu(cpu, "xlnx,use-hw-mul");
+ if (ci->use_mult != CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)
+ err_printk("HW_MUL");
+ ci->use_mult =
+ (ci->use_mult > 1 ?
+ (PVR2_USE_MUL64_MASK | PVR0_USE_HW_MUL_MASK) :
+ (ci->use_mult == 1 ? PVR0_USE_HW_MUL_MASK : 0));
+
+ ci->use_fpu = fcpu(cpu, "xlnx,use-fpu");
+ if (ci->use_fpu != CONFIG_XILINX_MICROBLAZE0_USE_FPU)
+ err_printk("HW_FPU");
+ ci->use_fpu = (ci->use_fpu > 1 ?
+ (PVR2_USE_FPU2_MASK | PVR0_USE_FPU_MASK) :
+ (ci->use_fpu == 1 ? PVR0_USE_FPU_MASK : 0));
+
+ ci->use_exc =
+ (fcpu(cpu, "xlnx,unaligned-exceptions") ?
+ PVR2_UNALIGNED_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,ill-opcode-exception") ?
+ PVR2_ILL_OPCODE_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,iopb-bus-exception") ?
+ PVR2_IOPB_BUS_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,dopb-bus-exception") ?
+ PVR2_DOPB_BUS_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,div-zero-exception") ?
+ PVR2_DIV_ZERO_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,fpu-exception") ? PVR2_FPU_EXC_MASK : 0) |
+ (fcpu(cpu, "xlnx,fsl-exception") ? PVR2_USE_EXTEND_FSL : 0);
+
+ ci->use_icache = fcpu(cpu, "xlnx,use-icache");
+ ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits");
+ ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr");
+ ci->icache_line = fcpu(cpu, "xlnx,icache-line-len") << 2;
+ if (!ci->icache_line) {
+ if (fcpu(cpu, "xlnx,icache-use-fsl"))
+ ci->icache_line = 4 << 2;
+ else
+ ci->icache_line = 1 << 2;
+ }
+ ci->icache_size = fcpu(cpu, "i-cache-size");
+ ci->icache_base = fcpu(cpu, "i-cache-baseaddr");
+ ci->icache_high = fcpu(cpu, "i-cache-highaddr");
+
+ ci->use_dcache = fcpu(cpu, "xlnx,use-dcache");
+ ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag");
+ ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr");
+ ci->dcache_line = fcpu(cpu, "xlnx,dcache-line-len") << 2;
+ if (!ci->dcache_line) {
+ if (fcpu(cpu, "xlnx,dcache-use-fsl"))
+ ci->dcache_line = 4 << 2;
+ else
+ ci->dcache_line = 1 << 2;
+ }
+ ci->dcache_size = fcpu(cpu, "d-cache-size");
+ ci->dcache_base = fcpu(cpu, "d-cache-baseaddr");
+ ci->dcache_high = fcpu(cpu, "d-cache-highaddr");
+
+ ci->use_dopb = fcpu(cpu, "xlnx,d-opb");
+ ci->use_iopb = fcpu(cpu, "xlnx,i-opb");
+ ci->use_dlmb = fcpu(cpu, "xlnx,d-lmb");
+ ci->use_ilmb = fcpu(cpu, "xlnx,i-lmb");
+
+ ci->num_fsl = fcpu(cpu, "xlnx,fsl-links");
+ ci->irq_edge = fcpu(cpu, "xlnx,interrupt-is-edge");
+ ci->irq_positive = fcpu(cpu, "xlnx,edge-is-positive");
+ ci->area_optimised = 0;
+
+ ci->hw_debug = fcpu(cpu, "xlnx,debug-enabled");
+ ci->num_pc_brk = fcpu(cpu, "xlnx,number-of-pc-brk");
+ ci->num_rd_brk = fcpu(cpu, "xlnx,number-of-rd-addr-brk");
+ ci->num_wr_brk = fcpu(cpu, "xlnx,number-of-wr-addr-brk");
+
+ ci->cpu_clock_freq = fcpu(cpu, "timebase-frequency");
+
+ ci->pvr_user1 = fcpu(cpu, "xlnx,pvr-user1");
+ ci->pvr_user2 = fcpu(cpu, "xlnx,pvr-user2");
+
+ ci->mmu = fcpu(cpu, "xlnx,use-mmu");
+
+ ci->ver_code = 0;
+ ci->fpga_family_code = 0;
+
+ /* Do various fixups based on CPU version and FPGA family strings */
+
+ /* Resolved the CPU version code */
+ for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+ if (strcmp(cpu_ver_lookup[i].s, cpu_ver_string) == 0)
+ ci->ver_code = cpu_ver_lookup[i].k;
+ }
+
+ /* Resolved the fpga family code */
+ for (i = 0; family_string_lookup[i].s != NULL; i++) {
+ if (strcmp(family_string_lookup[i].s, family_string) == 0)
+ ci->fpga_family_code = family_string_lookup[i].k;
+ }
+
+ /* FIXME - mb3 and spartan2 do not exist in PVR */
+ /* This is mb3 and on a non Spartan2 */
+ if (ci->ver_code == 0x20 && ci->fpga_family_code != 0xf0)
+ /* Hardware Multiplier in use */
+ ci->use_mult = 1;
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <asm/cpuinfo.h>
+#include <asm/pvr.h>
+
+const struct cpu_ver_key cpu_ver_lookup[] = {
+ /* These key value are as per MBV field in PVR0 */
+ {"5.00.a", 0x01},
+ {"5.00.b", 0x02},
+ {"5.00.c", 0x03},
+ {"6.00.a", 0x04},
+ {"6.00.b", 0x06},
+ {"7.00.a", 0x05},
+ {"7.00.b", 0x07},
+ {"7.10.a", 0x08},
+ {"7.10.b", 0x09},
+ {"7.10.c", 0x0a},
+ {"7.10.d", 0x0b},
+ /* FIXME There is no keycode defined in MBV for these versions */
+ {"2.10.a", 0x10},
+ {"3.00.a", 0x20},
+ {"4.00.a", 0x30},
+ {"4.00.b", 0x40},
+ {NULL, 0},
+};
+
+/*
+ * FIXME Not sure if the actual key is defined by Xilinx in the PVR
+ */
+const struct family_string_key family_string_lookup[] = {
+ {"virtex2", 0x4},
+ {"virtex2pro", 0x5},
+ {"spartan3", 0x6},
+ {"virtex4", 0x7},
+ {"virtex5", 0x8},
+ {"spartan3e", 0x9},
+ {"spartan3a", 0xa},
+ {"spartan3an", 0xb},
+ {"spartan3adsp", 0xc},
+ /* FIXME There is no key code defined for spartan2 */
+ {"spartan2", 0xf0},
+ {NULL, 0},
+};
+
+struct cpuinfo cpuinfo;
+
+void __init setup_cpuinfo(void)
+{
+ struct device_node *cpu = NULL;
+
+ cpu = (struct device_node *) of_find_node_by_type(NULL, "cpu");
+ if (!cpu)
+ printk(KERN_ERR "You don't have cpu!!!\n");
+
+ printk(KERN_INFO "%s: initialising\n", __func__);
+
+ switch (cpu_has_pvr()) {
+ case 0:
+ printk(KERN_WARNING
+ "%s: No PVR support. Using static CPU info from FDT\n",
+ __func__);
+ set_cpuinfo_static(&cpuinfo, cpu);
+ break;
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
+ * please do not use FULL PVR with MMU */
+ case 1:
+ printk(KERN_INFO "%s: Using full CPU PVR support\n",
+ __func__);
+ set_cpuinfo_static(&cpuinfo, cpu);
+ set_cpuinfo_pvr_full(&cpuinfo, cpu);
+ break;
+ default:
+ printk(KERN_WARNING "%s: Unsupported PVR setting\n", __func__);
+ set_cpuinfo_static(&cpuinfo, cpu);
+ }
+}
--- /dev/null
+/*
+ * CPU-version specific code
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006-2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+
+#include <linux/bug.h>
+#include <asm/cpuinfo.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <linux/param.h>
+#include <asm/pvr.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ int count = 0;
+ char *fpga_family = "Unknown";
+ char *cpu_ver = "Unknown";
+ int i;
+
+ /* Denormalised to get the fpga family string */
+ for (i = 0; family_string_lookup[i].s != NULL; i++) {
+ if (cpuinfo.fpga_family_code == family_string_lookup[i].k) {
+ fpga_family = (char *)family_string_lookup[i].s;
+ break;
+ }
+ }
+
+ /* Denormalised to get the hw version string */
+ for (i = 0; cpu_ver_lookup[i].s != NULL; i++) {
+ if (cpuinfo.ver_code == cpu_ver_lookup[i].k) {
+ cpu_ver = (char *)cpu_ver_lookup[i].s;
+ break;
+ }
+ }
+
+ count = seq_printf(m,
+ "CPU-Family: MicroBlaze\n"
+ "FPGA-Arch: %s\n"
+ "CPU-Ver: %s\n"
+ "CPU-MHz: %d.%02d\n"
+ "BogoMips: %lu.%02lu\n",
+ fpga_family,
+ cpu_ver,
+ cpuinfo.cpu_clock_freq /
+ 1000000,
+ cpuinfo.cpu_clock_freq %
+ 1000000,
+ loops_per_jiffy / (500000 / HZ),
+ (loops_per_jiffy / (5000 / HZ)) % 100);
+
+ count += seq_printf(m,
+ "HW:\n Shift:\t\t%s\n"
+ " MSR:\t\t%s\n"
+ " PCMP:\t\t%s\n"
+ " DIV:\t\t%s\n",
+ (cpuinfo.use_instr & PVR0_USE_BARREL_MASK) ? "yes" : "no",
+ (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) ? "yes" : "no",
+ (cpuinfo.use_instr & PVR2_USE_PCMP_INSTR) ? "yes" : "no",
+ (cpuinfo.use_instr & PVR0_USE_DIV_MASK) ? "yes" : "no");
+
+ count += seq_printf(m,
+ " MMU:\t\t%x\n",
+ cpuinfo.mmu);
+
+ count += seq_printf(m,
+ " MUL:\t\t%s\n"
+ " FPU:\t\t%s\n",
+ (cpuinfo.use_mult & PVR2_USE_MUL64_MASK) ? "v2" :
+ (cpuinfo.use_mult & PVR0_USE_HW_MUL_MASK) ? "v1" : "no",
+ (cpuinfo.use_fpu & PVR2_USE_FPU2_MASK) ? "v2" :
+ (cpuinfo.use_fpu & PVR0_USE_FPU_MASK) ? "v1" : "no");
+
+ count += seq_printf(m,
+ " Exc:\t\t%s%s%s%s%s%s%s%s\n",
+ (cpuinfo.use_exc & PVR2_OPCODE_0x0_ILL_MASK) ? "op0x0 " : "",
+ (cpuinfo.use_exc & PVR2_UNALIGNED_EXC_MASK) ? "unal " : "",
+ (cpuinfo.use_exc & PVR2_ILL_OPCODE_EXC_MASK) ? "ill " : "",
+ (cpuinfo.use_exc & PVR2_IOPB_BUS_EXC_MASK) ? "iopb " : "",
+ (cpuinfo.use_exc & PVR2_DOPB_BUS_EXC_MASK) ? "dopb " : "",
+ (cpuinfo.use_exc & PVR2_DIV_ZERO_EXC_MASK) ? "zero " : "",
+ (cpuinfo.use_exc & PVR2_FPU_EXC_MASK) ? "fpu " : "",
+ (cpuinfo.use_exc & PVR2_USE_FSL_EXC) ? "fsl " : "");
+
+ if (cpuinfo.use_icache)
+ count += seq_printf(m,
+ "Icache:\t\t%ukB\n",
+ cpuinfo.icache_size >> 10);
+ else
+ count += seq_printf(m, "Icache:\t\tno\n");
+
+ if (cpuinfo.use_dcache)
+ count += seq_printf(m,
+ "Dcache:\t\t%ukB\n",
+ cpuinfo.dcache_size >> 10);
+ else
+ count += seq_printf(m, "Dcache:\t\tno\n");
+
+ count += seq_printf(m,
+ "HW-Debug:\t%s\n",
+ cpuinfo.hw_debug ? "yes" : "no");
+
+ count += seq_printf(m,
+ "PVR-USR1:\t%02x\n"
+ "PVR-USR2:\t%08x\n",
+ cpuinfo.pvr_user1,
+ cpuinfo.pvr_user2);
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ int i = *pos;
+
+ return i < NR_CPUS ? (void *) (i + 1) : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
--- /dev/null
+/*
+ * Support for MicroBlaze PVR (processor version register)
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <asm/system.h>
+#include <asm/exceptions.h>
+#include <asm/pvr.h>
+
+/*
+ * Until we get an assembler that knows about the pvr registers,
+ * this horrible cruft will have to do.
+ * That hardcoded opcode is mfs r3, rpvrNN
+ */
+
+#define get_single_pvr(pvrid, val) \
+{ \
+ register unsigned tmp __asm__("r3"); \
+ tmp = 0x0; /* Prevent warning about unused */ \
+ __asm__ __volatile__ ( \
+ ".byte 0x94,0x60,0xa0, " #pvrid "\n\t" \
+ : "=r" (tmp) : : "memory"); \
+ val = tmp; \
+}
+
+/*
+ * Does the CPU support the PVR register?
+ * return value:
+ * 0: no PVR
+ * 1: simple PVR
+ * 2: full PVR
+ *
+ * This must work on all CPU versions, including those before the
+ * PVR was even an option.
+ */
+
+int cpu_has_pvr(void)
+{
+ unsigned flags;
+ unsigned pvr0;
+
+ local_save_flags(flags);
+
+ /* PVR bit in MSR tells us if there is any support */
+ if (!(flags & PVR_MSR_BIT))
+ return 0;
+
+ get_single_pvr(0x00, pvr0);
+ pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
+
+ if (pvr0 & PVR0_PVR_FULL_MASK)
+ return 1;
+
+ /* for partial PVR use static cpuinfo */
+ return 2;
+}
+
+void get_pvr(struct pvr_s *p)
+{
+ get_single_pvr(0, p->pvr[0]);
+ get_single_pvr(1, p->pvr[1]);
+ get_single_pvr(2, p->pvr[2]);
+ get_single_pvr(3, p->pvr[3]);
+ get_single_pvr(4, p->pvr[4]);
+ get_single_pvr(5, p->pvr[5]);
+ get_single_pvr(6, p->pvr[6]);
+ get_single_pvr(7, p->pvr[7]);
+ get_single_pvr(8, p->pvr[8]);
+ get_single_pvr(9, p->pvr[9]);
+ get_single_pvr(10, p->pvr[10]);
+ get_single_pvr(11, p->pvr[11]);
+}
--- /dev/null
+/*
+ * Early printk support for Microblaze.
+ *
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2003-2006 Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/io.h>
+#include <asm/processor.h>
+#include <linux/fcntl.h>
+#include <asm/setup.h>
+#include <asm/prom.h>
+
+static u32 early_console_initialized;
+static u32 base_addr;
+
+static void early_printk_putc(char c)
+{
+ /*
+ * Limit how many times we'll spin waiting for TX FIFO status.
+ * This will prevent lockups if the base address is incorrectly
+ * set, or any other issue on the UARTLITE.
+ * This limit is pretty arbitrary, unless we are at about 10 baud
+ * we'll never timeout on a working UART.
+ */
+
+ unsigned retries = 10000;
+ /* read status bit - 0x8 offset */
+ while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
+ ;
+
+ /* Only attempt the iowrite if we didn't timeout */
+ /* write to TX_FIFO - 0x4 offset */
+ if (retries)
+ out_be32(base_addr + 4, c & 0xff);
+}
+
+static void early_printk_write(struct console *unused,
+ const char *s, unsigned n)
+{
+ while (*s && n-- > 0) {
+ early_printk_putc(*s);
+ if (*s == '\n')
+ early_printk_putc('\r');
+ s++;
+ }
+}
+
+static struct console early_serial_console = {
+ .name = "earlyser",
+ .write = early_printk_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+static struct console *early_console = &early_serial_console;
+
+void early_printk(const char *fmt, ...)
+{
+ char buf[512];
+ int n;
+ va_list ap;
+
+ if (early_console_initialized) {
+ va_start(ap, fmt);
+ n = vscnprintf(buf, 512, fmt, ap);
+ early_console->write(early_console, buf, n);
+ va_end(ap);
+ }
+}
+
+int __init setup_early_printk(char *opt)
+{
+ if (early_console_initialized)
+ return 1;
+
+ base_addr = early_uartlite_console();
+ if (base_addr) {
+ early_console_initialized = 1;
+ early_printk("early_printk_console is enabled at 0x%08x\n",
+ base_addr);
+
+ /* register_console(early_console); */
+
+ return 0;
+ } else
+ return 1;
+}
+
+void __init disable_early_printk(void)
+{
+ if (!early_console_initialized || !early_console)
+ return;
+ printk(KERN_WARNING "disabling early console\n");
+ unregister_console(early_console);
+ early_console_initialized = 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/entry.h>
+#include <asm/asm-offsets.h>
+#include <asm/registers.h>
+#include <asm/unistd.h>
+#include <asm/percpu.h>
+#include <asm/signal.h>
+
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ .macro disable_irq
+ msrclr r0, MSR_IE
+ .endm
+
+ .macro enable_irq
+ msrset r0, MSR_IE
+ .endm
+
+ .macro clear_bip
+ msrclr r0, MSR_BIP
+ .endm
+#else
+ .macro disable_irq
+ mfs r11, rmsr
+ andi r11, r11, ~MSR_IE
+ mts rmsr, r11
+ .endm
+
+ .macro enable_irq
+ mfs r11, rmsr
+ ori r11, r11, MSR_IE
+ mts rmsr, r11
+ .endm
+
+ .macro clear_bip
+ mfs r11, rmsr
+ andi r11, r11, ~MSR_BIP
+ mts rmsr, r11
+ .endm
+#endif
+
+ENTRY(_interrupt)
+ swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */
+ swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
+ lwi r11, r0, PER_CPU(KM) /* load mode indicator */
+ beqid r11, 1f
+ nop
+ brid 2f /* jump over */
+ addik r1, r1, (-PT_SIZE) /* room for pt_regs (delay slot) */
+1: /* switch to kernel stack */
+ lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */
+ lwi r1, r1, TS_THREAD_INFO /* get the thread info */
+ /* calculate kernel stack pointer */
+ addik r1, r1, THREAD_SIZE - PT_SIZE
+2:
+ swi r11, r1, PT_MODE /* store the mode */
+ lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */
+ swi r2, r1, PT_R2
+ swi r3, r1, PT_R3
+ swi r4, r1, PT_R4
+ swi r5, r1, PT_R5
+ swi r6, r1, PT_R6
+ swi r7, r1, PT_R7
+ swi r8, r1, PT_R8
+ swi r9, r1, PT_R9
+ swi r10, r1, PT_R10
+ swi r11, r1, PT_R11
+ swi r12, r1, PT_R12
+ swi r13, r1, PT_R13
+ swi r14, r1, PT_R14
+ swi r14, r1, PT_PC
+ swi r15, r1, PT_R15
+ swi r16, r1, PT_R16
+ swi r17, r1, PT_R17
+ swi r18, r1, PT_R18
+ swi r19, r1, PT_R19
+ swi r20, r1, PT_R20
+ swi r21, r1, PT_R21
+ swi r22, r1, PT_R22
+ swi r23, r1, PT_R23
+ swi r24, r1, PT_R24
+ swi r25, r1, PT_R25
+ swi r26, r1, PT_R26
+ swi r27, r1, PT_R27
+ swi r28, r1, PT_R28
+ swi r29, r1, PT_R29
+ swi r30, r1, PT_R30
+ swi r31, r1, PT_R31
+ /* special purpose registers */
+ mfs r11, rmsr
+ swi r11, r1, PT_MSR
+ mfs r11, rear
+ swi r11, r1, PT_EAR
+ mfs r11, resr
+ swi r11, r1, PT_ESR
+ mfs r11, rfsr
+ swi r11, r1, PT_FSR
+ /* reload original stack pointer and save it */
+ lwi r11, r0, PER_CPU(ENTRY_SP)
+ swi r11, r1, PT_R1
+ /* update mode indicator we are in kernel mode */
+ addik r11, r0, 1
+ swi r11, r0, PER_CPU(KM)
+ /* restore r31 */
+ lwi r31, r0, PER_CPU(CURRENT_SAVE)
+ /* prepare the link register, the argument and jump */
+ la r15, r0, ret_from_intr - 8
+ addk r6, r0, r15
+ braid do_IRQ
+ add r5, r0, r1
+
+ret_from_intr:
+ lwi r11, r1, PT_MODE
+ bneid r11, 3f
+
+ lwi r6, r31, TS_THREAD_INFO /* get thread info */
+ lwi r19, r6, TI_FLAGS /* get flags in thread info */
+ /* do an extra work if any bits are set */
+
+ andi r11, r19, _TIF_NEED_RESCHED
+ beqi r11, 1f
+ bralid r15, schedule
+ nop
+1: andi r11, r19, _TIF_SIGPENDING
+ beqid r11, no_intr_reshed
+ addk r5, r1, r0
+ addk r7, r0, r0
+ bralid r15, do_signal
+ addk r6, r0, r0
+
+no_intr_reshed:
+ /* save mode indicator */
+ lwi r11, r1, PT_MODE
+3:
+ swi r11, r0, PER_CPU(KM)
+
+ /* save r31 */
+ swi r31, r0, PER_CPU(CURRENT_SAVE)
+restore_context:
+ /* special purpose registers */
+ lwi r11, r1, PT_FSR
+ mts rfsr, r11
+ lwi r11, r1, PT_ESR
+ mts resr, r11
+ lwi r11, r1, PT_EAR
+ mts rear, r11
+ lwi r11, r1, PT_MSR
+ mts rmsr, r11
+
+ lwi r31, r1, PT_R31
+ lwi r30, r1, PT_R30
+ lwi r29, r1, PT_R29
+ lwi r28, r1, PT_R28
+ lwi r27, r1, PT_R27
+ lwi r26, r1, PT_R26
+ lwi r25, r1, PT_R25
+ lwi r24, r1, PT_R24
+ lwi r23, r1, PT_R23
+ lwi r22, r1, PT_R22
+ lwi r21, r1, PT_R21
+ lwi r20, r1, PT_R20
+ lwi r19, r1, PT_R19
+ lwi r18, r1, PT_R18
+ lwi r17, r1, PT_R17
+ lwi r16, r1, PT_R16
+ lwi r15, r1, PT_R15
+ lwi r14, r1, PT_PC
+ lwi r13, r1, PT_R13
+ lwi r12, r1, PT_R12
+ lwi r11, r1, PT_R11
+ lwi r10, r1, PT_R10
+ lwi r9, r1, PT_R9
+ lwi r8, r1, PT_R8
+ lwi r7, r1, PT_R7
+ lwi r6, r1, PT_R6
+ lwi r5, r1, PT_R5
+ lwi r4, r1, PT_R4
+ lwi r3, r1, PT_R3
+ lwi r2, r1, PT_R2
+ lwi r1, r1, PT_R1
+ rtid r14, 0
+ nop
+
+ENTRY(_reset)
+ brai 0;
+
+ENTRY(_user_exception)
+ swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */
+ swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
+ lwi r11, r0, PER_CPU(KM) /* load mode indicator */
+ beqid r11, 1f /* Already in kernel mode? */
+ nop
+ brid 2f /* jump over */
+ addik r1, r1, (-PT_SIZE) /* Room for pt_regs (delay slot) */
+1: /* Switch to kernel stack */
+ lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */
+ lwi r1, r1, TS_THREAD_INFO /* get the thread info */
+ /* calculate kernel stack pointer */
+ addik r1, r1, THREAD_SIZE - PT_SIZE
+ swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
+ lwi r11, r0, PER_CPU(KM) /* load mode indicator */
+2:
+ swi r11, r1, PT_MODE /* store the mode */
+ lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */
+ /* save them on stack */
+ swi r2, r1, PT_R2
+ swi r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */
+ swi r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */
+ swi r5, r1, PT_R5
+ swi r6, r1, PT_R6
+ swi r7, r1, PT_R7
+ swi r8, r1, PT_R8
+ swi r9, r1, PT_R9
+ swi r10, r1, PT_R10
+ swi r11, r1, PT_R11
+ /* r12: _always_ in clobber list; see unistd.h */
+ swi r12, r1, PT_R12
+ swi r13, r1, PT_R13
+ /* r14: _always_ in clobber list; see unistd.h */
+ swi r14, r1, PT_R14
+ /* but we want to return to the next inst. */
+ addik r14, r14, 0x4
+ swi r14, r1, PT_PC /* increment by 4 and store in pc */
+ swi r15, r1, PT_R15
+ swi r16, r1, PT_R16
+ swi r17, r1, PT_R17
+ swi r18, r1, PT_R18
+ swi r19, r1, PT_R19
+ swi r20, r1, PT_R20
+ swi r21, r1, PT_R21
+ swi r22, r1, PT_R22
+ swi r23, r1, PT_R23
+ swi r24, r1, PT_R24
+ swi r25, r1, PT_R25
+ swi r26, r1, PT_R26
+ swi r27, r1, PT_R27
+ swi r28, r1, PT_R28
+ swi r29, r1, PT_R29
+ swi r30, r1, PT_R30
+ swi r31, r1, PT_R31
+
+ disable_irq
+ nop /* make sure IE bit is in effect */
+ clear_bip /* once IE is in effect it is safe to clear BIP */
+ nop
+
+ /* special purpose registers */
+ mfs r11, rmsr
+ swi r11, r1, PT_MSR
+ mfs r11, rear
+ swi r11, r1, PT_EAR
+ mfs r11, resr
+ swi r11, r1, PT_ESR
+ mfs r11, rfsr
+ swi r11, r1, PT_FSR
+ /* reload original stack pointer and save it */
+ lwi r11, r0, PER_CPU(ENTRY_SP)
+ swi r11, r1, PT_R1
+ /* update mode indicator we are in kernel mode */
+ addik r11, r0, 1
+ swi r11, r0, PER_CPU(KM)
+ /* restore r31 */
+ lwi r31, r0, PER_CPU(CURRENT_SAVE)
+ /* re-enable interrupts now we are in kernel mode */
+ enable_irq
+
+ /* See if the system call number is valid. */
+ addi r11, r12, -__NR_syscalls
+ bgei r11, 1f /* return to user if not valid */
+ /* Figure out which function to use for this system call. */
+ /* Note Microblaze barrel shift is optional, so don't rely on it */
+ add r12, r12, r12 /* convert num -> ptr */
+ add r12, r12, r12
+ lwi r12, r12, sys_call_table /* Get function pointer */
+ la r15, r0, ret_to_user-8 /* set return address */
+ bra r12 /* Make the system call. */
+ bri 0 /* won't reach here */
+1:
+ brid ret_to_user /* jump to syscall epilogue */
+ addi r3, r0, -ENOSYS /* set errno in delay slot */
+
+/*
+ * Debug traps are like a system call, but entered via brki r14, 0x60
+ * All we need to do is send the SIGTRAP signal to current, ptrace and do_signal
+ * will handle the rest
+ */
+ENTRY(_debug_exception)
+ swi r1, r0, PER_CPU(ENTRY_SP) /* save the current sp */
+ lwi r1, r0, PER_CPU(CURRENT_SAVE) /* get the saved current */
+ lwi r1, r1, TS_THREAD_INFO /* get the thread info */
+ addik r1, r1, THREAD_SIZE - PT_SIZE /* get the kernel stack */
+ swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */
+ lwi r11, r0, PER_CPU(KM) /* load mode indicator */
+//save_context:
+ swi r11, r1, PT_MODE /* store the mode */
+ lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */
+ /* save them on stack */
+ swi r2, r1, PT_R2
+ swi r3, r1, PT_R3 /* r3: _always_ in clobber list; see unistd.h */
+ swi r4, r1, PT_R4 /* r4: _always_ in clobber list; see unistd.h */
+ swi r5, r1, PT_R5
+ swi r6, r1, PT_R6
+ swi r7, r1, PT_R7
+ swi r8, r1, PT_R8
+ swi r9, r1, PT_R9
+ swi r10, r1, PT_R10
+ swi r11, r1, PT_R11
+ /* r12: _always_ in clobber list; see unistd.h */
+ swi r12, r1, PT_R12
+ swi r13, r1, PT_R13
+ /* r14: _always_ in clobber list; see unistd.h */
+ swi r14, r1, PT_R14
+ swi r14, r1, PT_PC /* Will return to interrupted instruction */
+ swi r15, r1, PT_R15
+ swi r16, r1, PT_R16
+ swi r17, r1, PT_R17
+ swi r18, r1, PT_R18
+ swi r19, r1, PT_R19
+ swi r20, r1, PT_R20
+ swi r21, r1, PT_R21
+ swi r22, r1, PT_R22
+ swi r23, r1, PT_R23
+ swi r24, r1, PT_R24
+ swi r25, r1, PT_R25
+ swi r26, r1, PT_R26
+ swi r27, r1, PT_R27
+ swi r28, r1, PT_R28
+ swi r29, r1, PT_R29
+ swi r30, r1, PT_R30
+ swi r31, r1, PT_R31
+
+ disable_irq
+ nop /* make sure IE bit is in effect */
+ clear_bip /* once IE is in effect it is safe to clear BIP */
+ nop
+
+ /* special purpose registers */
+ mfs r11, rmsr
+ swi r11, r1, PT_MSR
+ mfs r11, rear
+ swi r11, r1, PT_EAR
+ mfs r11, resr
+ swi r11, r1, PT_ESR
+ mfs r11, rfsr
+ swi r11, r1, PT_FSR
+ /* reload original stack pointer and save it */
+ lwi r11, r0, PER_CPU(ENTRY_SP)
+ swi r11, r1, PT_R1
+ /* update mode indicator we are in kernel mode */
+ addik r11, r0, 1
+ swi r11, r0, PER_CPU(KM)
+ /* restore r31 */
+ lwi r31, r0, PER_CPU(CURRENT_SAVE)
+ /* re-enable interrupts now we are in kernel mode */
+ enable_irq
+
+ addi r5, r0, SIGTRAP /* sending the trap signal */
+ add r6, r0, r31 /* to current */
+ bralid r15, send_sig
+ add r7, r0, r0 /* 3rd param zero */
+
+ /* Restore r3/r4 to work around how ret_to_user works */
+ lwi r3, r1, PT_R3
+ lwi r4, r1, PT_R4
+ bri ret_to_user
+
+ENTRY(_break)
+ bri 0
+
+/* struct task_struct *_switch_to(struct thread_info *prev,
+ struct thread_info *next); */
+ENTRY(_switch_to)
+ /* prepare return value */
+ addk r3, r0, r31
+
+ /* save registers in cpu_context */
+ /* use r11 and r12, volatile registers, as temp register */
+ addik r11, r5, TI_CPU_CONTEXT
+ swi r1, r11, CC_R1
+ swi r2, r11, CC_R2
+ /* skip volatile registers.
+ * they are saved on stack when we jumped to _switch_to() */
+ /* dedicated registers */
+ swi r13, r11, CC_R13
+ swi r14, r11, CC_R14
+ swi r15, r11, CC_R15
+ swi r16, r11, CC_R16
+ swi r17, r11, CC_R17
+ swi r18, r11, CC_R18
+ /* save non-volatile registers */
+ swi r19, r11, CC_R19
+ swi r20, r11, CC_R20
+ swi r21, r11, CC_R21
+ swi r22, r11, CC_R22
+ swi r23, r11, CC_R23
+ swi r24, r11, CC_R24
+ swi r25, r11, CC_R25
+ swi r26, r11, CC_R26
+ swi r27, r11, CC_R27
+ swi r28, r11, CC_R28
+ swi r29, r11, CC_R29
+ swi r30, r11, CC_R30
+ /* special purpose registers */
+ mfs r12, rmsr
+ swi r12, r11, CC_MSR
+ mfs r12, rear
+ swi r12, r11, CC_EAR
+ mfs r12, resr
+ swi r12, r11, CC_ESR
+ mfs r12, rfsr
+ swi r12, r11, CC_FSR
+
+ /* update r31, the current */
+ lwi r31, r6, TI_TASK
+ swi r31, r0, PER_CPU(CURRENT_SAVE)
+
+ /* get new process' cpu context and restore */
+ addik r11, r6, TI_CPU_CONTEXT
+
+ /* special purpose registers */
+ lwi r12, r11, CC_FSR
+ mts rfsr, r12
+ lwi r12, r11, CC_ESR
+ mts resr, r12
+ lwi r12, r11, CC_EAR
+ mts rear, r12
+ lwi r12, r11, CC_MSR
+ mts rmsr, r12
+ /* non-volatile registers */
+ lwi r30, r11, CC_R30
+ lwi r29, r11, CC_R29
+ lwi r28, r11, CC_R28
+ lwi r27, r11, CC_R27
+ lwi r26, r11, CC_R26
+ lwi r25, r11, CC_R25
+ lwi r24, r11, CC_R24
+ lwi r23, r11, CC_R23
+ lwi r22, r11, CC_R22
+ lwi r21, r11, CC_R21
+ lwi r20, r11, CC_R20
+ lwi r19, r11, CC_R19
+ /* dedicated registers */
+ lwi r18, r11, CC_R18
+ lwi r17, r11, CC_R17
+ lwi r16, r11, CC_R16
+ lwi r15, r11, CC_R15
+ lwi r14, r11, CC_R14
+ lwi r13, r11, CC_R13
+ /* skip volatile registers */
+ lwi r2, r11, CC_R2
+ lwi r1, r11, CC_R1
+
+ rtsd r15, 8
+ nop
+
+ENTRY(ret_from_fork)
+ addk r5, r0, r3
+ addk r6, r0, r1
+ brlid r15, schedule_tail
+ nop
+ swi r31, r1, PT_R31 /* save r31 in user context. */
+ /* will soon be restored to r31 in ret_to_user */
+ addk r3, r0, r0
+ brid ret_to_user
+ nop
+
+work_pending:
+ andi r11, r19, _TIF_NEED_RESCHED
+ beqi r11, 1f
+ bralid r15, schedule
+ nop
+1: andi r11, r19, _TIF_SIGPENDING
+ beqi r11, no_work_pending
+ addk r5, r1, r0
+ addik r7, r0, 1
+ bralid r15, do_signal
+ addk r6, r0, r0
+ bri no_work_pending
+
+ENTRY(ret_to_user)
+ disable_irq
+
+ swi r4, r1, PT_R4 /* return val */
+ swi r3, r1, PT_R3 /* return val */
+
+ lwi r6, r31, TS_THREAD_INFO /* get thread info */
+ lwi r19, r6, TI_FLAGS /* get flags in thread info */
+ bnei r19, work_pending /* do an extra work if any bits are set */
+no_work_pending:
+ disable_irq
+
+ /* save r31 */
+ swi r31, r0, PER_CPU(CURRENT_SAVE)
+ /* save mode indicator */
+ lwi r18, r1, PT_MODE
+ swi r18, r0, PER_CPU(KM)
+//restore_context:
+ /* special purpose registers */
+ lwi r18, r1, PT_FSR
+ mts rfsr, r18
+ lwi r18, r1, PT_ESR
+ mts resr, r18
+ lwi r18, r1, PT_EAR
+ mts rear, r18
+ lwi r18, r1, PT_MSR
+ mts rmsr, r18
+
+ lwi r31, r1, PT_R31
+ lwi r30, r1, PT_R30
+ lwi r29, r1, PT_R29
+ lwi r28, r1, PT_R28
+ lwi r27, r1, PT_R27
+ lwi r26, r1, PT_R26
+ lwi r25, r1, PT_R25
+ lwi r24, r1, PT_R24
+ lwi r23, r1, PT_R23
+ lwi r22, r1, PT_R22
+ lwi r21, r1, PT_R21
+ lwi r20, r1, PT_R20
+ lwi r19, r1, PT_R19
+ lwi r18, r1, PT_R18
+ lwi r17, r1, PT_R17
+ lwi r16, r1, PT_R16
+ lwi r15, r1, PT_R15
+ lwi r14, r1, PT_PC
+ lwi r13, r1, PT_R13
+ lwi r12, r1, PT_R12
+ lwi r11, r1, PT_R11
+ lwi r10, r1, PT_R10
+ lwi r9, r1, PT_R9
+ lwi r8, r1, PT_R8
+ lwi r7, r1, PT_R7
+ lwi r6, r1, PT_R6
+ lwi r5, r1, PT_R5
+ lwi r4, r1, PT_R4 /* return val */
+ lwi r3, r1, PT_R3 /* return val */
+ lwi r2, r1, PT_R2
+ lwi r1, r1, PT_R1
+
+ rtid r14, 0
+ nop
+
+sys_vfork_wrapper:
+ brid sys_vfork
+ addk r5, r1, r0
+
+sys_clone_wrapper:
+ brid sys_clone
+ addk r7, r1, r0
+
+sys_execve_wrapper:
+ brid sys_execve
+ addk r8, r1, r0
+
+sys_sigreturn_wrapper:
+ brid sys_sigreturn
+ addk r5, r1, r0
+
+sys_rt_sigreturn_wrapper:
+ brid sys_rt_sigreturn
+ addk r5, r1, r0
+
+sys_sigsuspend_wrapper:
+ brid sys_rt_sigsuspend
+ addk r6, r1, r0
+
+sys_rt_sigsuspend_wrapper:
+ brid sys_rt_sigsuspend
+ addk r7, r1, r0
+
+ /* Interrupt vector table */
+ .section .init.ivt, "ax"
+ .org 0x0
+ brai _reset
+ brai _user_exception
+ brai _interrupt
+ brai _break
+ brai _hw_exception_handler
+ .org 0x60
+ brai _debug_exception
+
+.section .rodata,"a"
+#include "syscall_table.S"
+
+syscall_table_size=(.-sys_call_table)
--- /dev/null
+/*
+ * HW exception handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kallsyms.h>
+#include <linux/module.h>
+
+#include <asm/exceptions.h>
+#include <asm/entry.h> /* For KM CPU var */
+#include <asm/uaccess.h>
+#include <asm/errno.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02
+#define MICROBLAZE_IBUS_EXCEPTION 0x03
+#define MICROBLAZE_DBUS_EXCEPTION 0x04
+#define MICROBLAZE_DIV_ZERO_EXCEPTION 0x05
+#define MICROBLAZE_FPU_EXCEPTION 0x06
+#define MICROBLAZE_PRIVILEG_EXCEPTION 0x07
+
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *fp, long err)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ printk(KERN_WARNING "Oops: %s, sig: %ld\n", str, err);
+ show_regs(fp);
+ spin_unlock_irq(&die_lock);
+ /* do_exit() should take care of panic'ing from an interrupt
+ * context so we don't handle it here
+ */
+ do_exit(err);
+}
+
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
+{
+ siginfo_t info;
+
+ if (kernel_mode(regs)) {
+ debugger(regs);
+ die("Exception in kernel mode", regs, signr);
+ }
+ info.si_signo = signr;
+ info.si_errno = 0;
+ info.si_code = code;
+ info.si_addr = (void __user *) addr;
+ force_sig_info(signr, &info, current);
+}
+
+asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
+ int fsr, int addr)
+{
+#if 0
+ printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+ type, user_mode(regs) ? "user" : "kernel", fsr,
+ (unsigned int) regs->pc, (unsigned int) regs->esr);
+#endif
+
+ switch (type & 0x1F) {
+ case MICROBLAZE_ILL_OPCODE_EXCEPTION:
+ _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ break;
+ case MICROBLAZE_IBUS_EXCEPTION:
+ if (user_mode(regs)) {
+ printk(KERN_WARNING "Instruction bus error exception in user mode.\n");
+ _exception(SIGBUS, regs, BUS_ADRERR, addr);
+ return;
+ }
+ printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n");
+ die("bus exception", regs, SIGBUS);
+ break;
+ case MICROBLAZE_DBUS_EXCEPTION:
+ if (user_mode(regs)) {
+ printk(KERN_WARNING "Data bus error exception in user mode.\n");
+ _exception(SIGBUS, regs, BUS_ADRERR, addr);
+ return;
+ }
+ printk(KERN_WARNING "Data bus error exception in kernel mode.\n");
+ die("bus exception", regs, SIGBUS);
+ break;
+ case MICROBLAZE_DIV_ZERO_EXCEPTION:
+ printk(KERN_WARNING "Divide by zero exception\n");
+ _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ break;
+
+ case MICROBLAZE_FPU_EXCEPTION:
+ /* IEEE FP exception */
+ /* I removed fsr variable and use code var for storing fsr */
+ if (fsr & FSR_IO)
+ fsr = FPE_FLTINV;
+ else if (fsr & FSR_OF)
+ fsr = FPE_FLTOVF;
+ else if (fsr & FSR_UF)
+ fsr = FPE_FLTUND;
+ else if (fsr & FSR_DZ)
+ fsr = FPE_FLTDIV;
+ else if (fsr & FSR_DO)
+ fsr = FPE_FLTRES;
+ _exception(SIGFPE, regs, fsr, addr);
+ break;
+
+ default:
+ printk(KERN_WARNING "Unexpected exception %02x "
+ "PC=%08x in %s mode\n", type, (unsigned int) addr,
+ kernel_mode(regs) ? "kernel" : "user");
+ }
+ return;
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/page.h>
+
+ .text
+ENTRY(_start)
+ mfs r1, rmsr
+ andi r1, r1, ~2
+ mts rmsr, r1
+
+/* save fdt to kernel location */
+/* r7 stores pointer to fdt blob */
+ beqi r7, no_fdt_arg
+ or r11, r0, r0 /* incremment */
+ ori r4, r0, TOPHYS(_fdt_start) /* save bram context */
+ ori r3, r0, (0x4000 - 4)
+_copy_fdt:
+ lw r12, r7, r11 /* r12 = r7 + r11 */
+ sw r12, r4, r11 /* addr[r4 + r11] = r12 */
+ addik r11, r11, 4 /* increment counting */
+ bgtid r3, _copy_fdt /* loop for all entries */
+ addik r3, r3, -4 /* descrement loop */
+no_fdt_arg:
+
+ /* Initialize small data anchors */
+ la r13, r0, _KERNEL_SDA_BASE_
+ la r2, r0, _KERNEL_SDA2_BASE_
+
+ /* Initialize stack pointer */
+ la r1, r0, init_thread_union + THREAD_SIZE - 4
+
+ /* Initialize r31 with current task address */
+ la r31, r0, init_task
+
+ /*
+ * Call platform dependent initialize function.
+ * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
+ * the function.
+ */
+ la r8, r0, machine_early_init
+ brald r15, r8
+ nop
+
+ la r15, r0, machine_halt
+ braid start_kernel
+ nop
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static unsigned int base_addr;
+
+void heartbeat(void)
+{
+ static unsigned int cnt, period, dist;
+
+ if (base_addr) {
+ if (cnt == 0 || cnt == dist)
+ out_be32(base_addr, 1);
+ else if (cnt == 7 || cnt == dist + 7)
+ out_be32(base_addr, 0);
+
+ if (++cnt > period) {
+ cnt = 0;
+ /*
+ * The hyperbolic function below modifies the heartbeat
+ * period length in dependency of the current (5min)
+ * load. It goes through the points f(0)=126, f(1)=86,
+ * f(5)=51, f(inf)->30.
+ */
+ period = ((672 << FSHIFT) / (5 * avenrun[0] +
+ (7 << FSHIFT))) + 30;
+ dist = period / 4;
+ }
+ }
+}
+
+void setup_heartbeat(void)
+{
+ struct device_node *gpio = NULL;
+ int j;
+ char *gpio_list[] = {
+ "xlnx,xps-gpio-1.00.a",
+ "xlnx,opb-gpio-1.00.a",
+ NULL
+ };
+
+ for (j = 0; gpio_list[j] != NULL; j++) {
+ gpio = of_find_compatible_node(NULL, NULL, gpio_list[j]);
+ if (gpio)
+ break;
+ }
+
+ base_addr = *(int *) of_get_property(gpio, "reg", NULL);
+ base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE);
+ printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr);
+
+ if (*(int *) of_get_property(gpio, "xlnx,is-bidir", NULL))
+ out_be32(base_addr + 4, 0); /* GPIO is configured as output */
+}
--- /dev/null
+/*
+ * Exception handling for Microblaze
+ *
+ * Rewriten interrupt handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ *
+ * uClinux customisation (C) 2005 John Williams
+ *
+ * MMU code derived from arch/ppc/kernel/head_4xx.S:
+ * Copyright (C) 1995-1996 Gary Thomas <gdt@linuxppc.org>
+ * Initial PowerPC version.
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Rewritten for PReP
+ * Copyright (C) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
+ * Low-level exception handers, MMU support, and rewrite.
+ * Copyright (C) 1997 Dan Malek <dmalek@jlc.net>
+ * PowerPC 8xx modifications.
+ * Copyright (C) 1998-1999 TiVo, Inc.
+ * PowerPC 403GCX modifications.
+ * Copyright (C) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * PowerPC 403GCX/405GP modifications.
+ * Copyright 2000 MontaVista Software Inc.
+ * PPC405 modifications
+ * PowerPC 403GCX/405GP modifications.
+ * Author: MontaVista Software, Inc.
+ * frank_rowand@mvista.com or source@mvista.com
+ * debbie_chu@mvista.com
+ *
+ * Original code
+ * Copyright (C) 2004 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/*
+ * Here are the handlers which don't require enabling translation
+ * and calling other kernel code thus we can keep their design very simple
+ * and do all processing in real mode. All what they need is a valid current
+ * (that is an issue for the CONFIG_REGISTER_TASK_PTR case)
+ * This handlers use r3,r4,r5,r6 and optionally r[current] to work therefore
+ * these registers are saved/restored
+ * The handlers which require translation are in entry.S --KAA
+ *
+ * Microblaze HW Exception Handler
+ * - Non self-modifying exception handler for the following exception conditions
+ * - Unalignment
+ * - Instruction bus error
+ * - Data bus error
+ * - Illegal instruction opcode
+ * - Divide-by-zero
+ *
+ * Note we disable interrupts during exception handling, otherwise we will
+ * possibly get multiple re-entrancy if interrupt handles themselves cause
+ * exceptions. JW
+ */
+
+#include <asm/exceptions.h>
+#include <asm/unistd.h>
+#include <asm/page.h>
+
+#include <asm/entry.h>
+#include <asm/current.h>
+#include <linux/linkage.h>
+
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/asm-offsets.h>
+
+/* Helpful Macros */
+#define EX_HANDLER_STACK_SIZ (4*19)
+#define NUM_TO_REG(num) r ## num
+
+#define LWREG_NOP \
+ bri ex_handler_unhandled; \
+ nop;
+
+#define SWREG_NOP \
+ bri ex_handler_unhandled; \
+ nop;
+
+/* FIXME this is weird - for noMMU kernel is not possible to use brid
+ * instruction which can shorten executed time
+ */
+
+/* r3 is the source */
+#define R3_TO_LWREG_V(regnum) \
+ swi r3, r1, 4 * regnum; \
+ bri ex_handler_done;
+
+/* r3 is the source */
+#define R3_TO_LWREG(regnum) \
+ or NUM_TO_REG (regnum), r0, r3; \
+ bri ex_handler_done;
+
+/* r3 is the target */
+#define SWREG_TO_R3_V(regnum) \
+ lwi r3, r1, 4 * regnum; \
+ bri ex_sw_tail;
+
+/* r3 is the target */
+#define SWREG_TO_R3(regnum) \
+ or r3, r0, NUM_TO_REG (regnum); \
+ bri ex_sw_tail;
+
+.extern other_exception_handler /* Defined in exception.c */
+
+/*
+ * hw_exception_handler - Handler for exceptions
+ *
+ * Exception handler notes:
+ * - Handles all exceptions
+ * - Does not handle unaligned exceptions during load into r17, r1, r0.
+ * - Does not handle unaligned exceptions during store from r17 (cannot be
+ * done) and r1 (slows down common case)
+ *
+ * Relevant register structures
+ *
+ * EAR - |----|----|----|----|----|----|----|----|
+ * - < ## 32 bit faulting address ## >
+ *
+ * ESR - |----|----|----|----|----| - | - |-----|-----|
+ * - W S REG EXC
+ *
+ *
+ * STACK FRAME STRUCTURE (for NO_MMU)
+ * ---------------------------------
+ *
+ * +-------------+ + 0
+ * | MSR |
+ * +-------------+ + 4
+ * | r1 |
+ * | . |
+ * | . |
+ * | . |
+ * | . |
+ * | r18 |
+ * +-------------+ + 76
+ * | . |
+ * | . |
+ *
+ * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S
+ * which is used for storing register values - old style was, that value were
+ * stored in stack but in case of failure you lost information about register.
+ * Currently you can see register value in memory in specific place.
+ * In compare to with previous solution the speed should be the same.
+ *
+ * MMU exception handler has different handling compare to no MMU kernel.
+ * Exception handler use jump table for directing of what happen. For MMU kernel
+ * is this approach better because MMU relate exception are handled by asm code
+ * in this file. In compare to with MMU expect of unaligned exception
+ * is everything handled by C code.
+ */
+
+/*
+ * every of these handlers is entered having R3/4/5/6/11/current saved on stack
+ * and clobbered so care should be taken to restore them if someone is going to
+ * return from exception
+ */
+
+/* wrappers to restore state before coming to entry.S */
+
+.global _hw_exception_handler
+.section .text
+.align 4
+.ent _hw_exception_handler
+_hw_exception_handler:
+ addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
+ swi r3, r1, PT_R3
+ swi r4, r1, PT_R4
+ swi r5, r1, PT_R5
+ swi r6, r1, PT_R6
+
+ mfs r5, rmsr;
+ nop
+ swi r5, r1, 0;
+ mfs r4, rbtr /* Save BTR before jumping to handler */
+ nop
+ mfs r3, resr
+ nop
+
+ andi r5, r3, 0x1000; /* Check ESR[DS] */
+ beqi r5, not_in_delay_slot; /* Branch if ESR[DS] not set */
+ mfs r17, rbtr; /* ESR[DS] set - return address in BTR */
+ nop
+not_in_delay_slot:
+ swi r17, r1, PT_R17
+
+ andi r5, r3, 0x1F; /* Extract ESR[EXC] */
+
+ /* Exceptions enabled here. This will allow nested exceptions */
+ mfs r6, rmsr;
+ nop
+ swi r6, r1, 0; /* RMSR_OFFSET */
+ ori r6, r6, 0x100; /* Turn ON the EE bit */
+ andi r6, r6, ~2; /* Disable interrupts */
+ mts rmsr, r6;
+ nop
+
+ xori r6, r5, 1; /* 00001 = Unaligned Exception */
+ /* Jump to unalignment exception handler */
+ beqi r6, handle_unaligned_ex;
+
+handle_other_ex: /* Handle Other exceptions here */
+ /* Save other volatiles before we make procedure calls below */
+ swi r7, r1, PT_R7
+ swi r8, r1, PT_R8
+ swi r9, r1, PT_R9
+ swi r10, r1, PT_R10
+ swi r11, r1, PT_R11
+ swi r12, r1, PT_R12
+ swi r14, r1, PT_R14
+ swi r15, r1, PT_R15
+ swi r18, r1, PT_R18
+
+ or r5, r1, r0
+ andi r6, r3, 0x1F; /* Load ESR[EC] */
+ lwi r7, r0, PER_CPU(KM) /* MS: saving current kernel mode to regs */
+ swi r7, r1, PT_MODE
+ mfs r7, rfsr
+ nop
+ addk r8, r17, r0; /* Load exception address */
+ bralid r15, full_exception; /* Branch to the handler */
+ nop;
+
+ /*
+ * Trigger execution of the signal handler by enabling
+ * interrupts and calling an invalid syscall.
+ */
+ mfs r5, rmsr;
+ nop
+ ori r5, r5, 2;
+ mts rmsr, r5; /* enable interrupt */
+ nop
+ addi r12, r0, __NR_syscalls;
+ brki r14, 0x08;
+ mfs r5, rmsr; /* disable interrupt */
+ nop
+ andi r5, r5, ~2;
+ mts rmsr, r5;
+ nop
+
+ lwi r7, r1, PT_R7
+ lwi r8, r1, PT_R8
+ lwi r9, r1, PT_R9
+ lwi r10, r1, PT_R10
+ lwi r11, r1, PT_R11
+ lwi r12, r1, PT_R12
+ lwi r14, r1, PT_R14
+ lwi r15, r1, PT_R15
+ lwi r18, r1, PT_R18
+
+ bri ex_handler_done; /* Complete exception handling */
+
+/* 0x01 - Unaligned data access exception
+ * This occurs when a word access is not aligned on a word boundary,
+ * or when a 16-bit access is not aligned on a 16-bit boundary.
+ * This handler perform the access, and returns, except for MMU when
+ * the unaligned address is last on a 4k page or the physical address is
+ * not found in the page table, in which case unaligned_data_trap is called.
+ */
+handle_unaligned_ex:
+ /* Working registers already saved: R3, R4, R5, R6
+ * R3 = ESR
+ * R4 = BTR
+ */
+ mfs r4, rear;
+ nop
+
+ andi r6, r3, 0x3E0; /* Mask and extract the register operand */
+ srl r6, r6; /* r6 >> 5 */
+ srl r6, r6;
+ srl r6, r6;
+ srl r6, r6;
+ srl r6, r6;
+ /* Store the register operand in a temporary location */
+ sbi r6, r0, TOPHYS(ex_reg_op);
+
+ andi r6, r3, 0x400; /* Extract ESR[S] */
+ bnei r6, ex_sw;
+ex_lw:
+ andi r6, r3, 0x800; /* Extract ESR[W] */
+ beqi r6, ex_lhw;
+ lbui r5, r4, 0; /* Exception address in r4 */
+ /* Load a word, byte-by-byte from destination address
+ and save it in tmp space */
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r5, r4, 1;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_1);
+ lbui r5, r4, 2;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_2);
+ lbui r5, r4, 3;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_3);
+ /* Get the destination register value into r3 */
+ lwi r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ bri ex_lw_tail;
+ex_lhw:
+ lbui r5, r4, 0; /* Exception address in r4 */
+ /* Load a half-word, byte-by-byte from destination
+ address and save it in tmp space */
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r5, r4, 1;
+ sbi r5, r0, TOPHYS(ex_tmp_data_loc_1);
+ /* Get the destination register value into r3 */
+ lhui r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ex_lw_tail:
+ /* Get the destination register number into r5 */
+ lbui r5, r0, TOPHYS(ex_reg_op);
+ /* Form load_word jump table offset (lw_table + (8 * regnum)) */
+ la r6, r0, TOPHYS(lw_table);
+ addk r5, r5, r5;
+ addk r5, r5, r5;
+ addk r5, r5, r5;
+ addk r5, r5, r6;
+ bra r5;
+ex_lw_end: /* Exception handling of load word, ends */
+ex_sw:
+ /* Get the destination register number into r5 */
+ lbui r5, r0, TOPHYS(ex_reg_op);
+ /* Form store_word jump table offset (sw_table + (8 * regnum)) */
+ la r6, r0, TOPHYS(sw_table);
+ add r5, r5, r5;
+ add r5, r5, r5;
+ add r5, r5, r5;
+ add r5, r5, r6;
+ bra r5;
+ex_sw_tail:
+ mfs r6, resr;
+ nop
+ andi r6, r6, 0x800; /* Extract ESR[W] */
+ beqi r6, ex_shw;
+ /* Get the word - delay slot */
+ swi r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ /* Store the word, byte-by-byte into destination address */
+ lbui r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ sbi r3, r4, 0;
+ lbui r3, r0, TOPHYS(ex_tmp_data_loc_1);
+ sbi r3, r4, 1;
+ lbui r3, r0, TOPHYS(ex_tmp_data_loc_2);
+ sbi r3, r4, 2;
+ lbui r3, r0, TOPHYS(ex_tmp_data_loc_3);
+ sbi r3, r4, 3;
+ bri ex_handler_done;
+
+ex_shw:
+ /* Store the lower half-word, byte-by-byte into destination address */
+ swi r3, r0, TOPHYS(ex_tmp_data_loc_0);
+ lbui r3, r0, TOPHYS(ex_tmp_data_loc_2);
+ sbi r3, r4, 0;
+ lbui r3, r0, TOPHYS(ex_tmp_data_loc_3);
+ sbi r3, r4, 1;
+ex_sw_end: /* Exception handling of store word, ends. */
+
+ex_handler_done:
+ lwi r5, r1, 0 /* RMSR */
+ mts rmsr, r5
+ nop
+ lwi r3, r1, PT_R3
+ lwi r4, r1, PT_R4
+ lwi r5, r1, PT_R5
+ lwi r6, r1, PT_R6
+ lwi r17, r1, PT_R17
+
+ rted r17, 0
+ addik r1, r1, (EX_HANDLER_STACK_SIZ); /* Restore stack frame */
+
+.end _hw_exception_handler
+
+ex_handler_unhandled:
+/* FIXME add handle function for unhandled exception - dump register */
+ bri 0
+
+.section .text
+.align 4
+lw_table:
+lw_r0: R3_TO_LWREG (0);
+lw_r1: LWREG_NOP;
+lw_r2: R3_TO_LWREG (2);
+lw_r3: R3_TO_LWREG_V (3);
+lw_r4: R3_TO_LWREG_V (4);
+lw_r5: R3_TO_LWREG_V (5);
+lw_r6: R3_TO_LWREG_V (6);
+lw_r7: R3_TO_LWREG (7);
+lw_r8: R3_TO_LWREG (8);
+lw_r9: R3_TO_LWREG (9);
+lw_r10: R3_TO_LWREG (10);
+lw_r11: R3_TO_LWREG (11);
+lw_r12: R3_TO_LWREG (12);
+lw_r13: R3_TO_LWREG (13);
+lw_r14: R3_TO_LWREG (14);
+lw_r15: R3_TO_LWREG (15);
+lw_r16: R3_TO_LWREG (16);
+lw_r17: LWREG_NOP;
+lw_r18: R3_TO_LWREG (18);
+lw_r19: R3_TO_LWREG (19);
+lw_r20: R3_TO_LWREG (20);
+lw_r21: R3_TO_LWREG (21);
+lw_r22: R3_TO_LWREG (22);
+lw_r23: R3_TO_LWREG (23);
+lw_r24: R3_TO_LWREG (24);
+lw_r25: R3_TO_LWREG (25);
+lw_r26: R3_TO_LWREG (26);
+lw_r27: R3_TO_LWREG (27);
+lw_r28: R3_TO_LWREG (28);
+lw_r29: R3_TO_LWREG (29);
+lw_r30: R3_TO_LWREG (30);
+lw_r31: R3_TO_LWREG (31);
+
+sw_table:
+sw_r0: SWREG_TO_R3 (0);
+sw_r1: SWREG_NOP;
+sw_r2: SWREG_TO_R3 (2);
+sw_r3: SWREG_TO_R3_V (3);
+sw_r4: SWREG_TO_R3_V (4);
+sw_r5: SWREG_TO_R3_V (5);
+sw_r6: SWREG_TO_R3_V (6);
+sw_r7: SWREG_TO_R3 (7);
+sw_r8: SWREG_TO_R3 (8);
+sw_r9: SWREG_TO_R3 (9);
+sw_r10: SWREG_TO_R3 (10);
+sw_r11: SWREG_TO_R3 (11);
+sw_r12: SWREG_TO_R3 (12);
+sw_r13: SWREG_TO_R3 (13);
+sw_r14: SWREG_TO_R3 (14);
+sw_r15: SWREG_TO_R3 (15);
+sw_r16: SWREG_TO_R3 (16);
+sw_r17: SWREG_NOP;
+sw_r18: SWREG_TO_R3 (18);
+sw_r19: SWREG_TO_R3 (19);
+sw_r20: SWREG_TO_R3 (20);
+sw_r21: SWREG_TO_R3 (21);
+sw_r22: SWREG_TO_R3 (22);
+sw_r23: SWREG_TO_R3 (23);
+sw_r24: SWREG_TO_R3 (24);
+sw_r25: SWREG_TO_R3 (25);
+sw_r26: SWREG_TO_R3 (26);
+sw_r27: SWREG_TO_R3 (27);
+sw_r28: SWREG_TO_R3 (28);
+sw_r29: SWREG_TO_R3 (29);
+sw_r30: SWREG_TO_R3 (30);
+sw_r31: SWREG_TO_R3 (31);
+
+/* Temporary data structures used in the handler */
+.section .data
+.align 4
+ex_tmp_data_loc_0:
+ .byte 0
+ex_tmp_data_loc_1:
+ .byte 0
+ex_tmp_data_loc_2:
+ .byte 0
+ex_tmp_data_loc_3:
+ .byte 0
+ex_reg_op:
+ .byte 0
--- /dev/null
+/*
+ * Copyright (C) 2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init_task.h>
+#include <linux/fs.h>
+#include <linux/mqueue.h>
+
+#include <asm/pgtable.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+struct mm_struct init_mm = INIT_MM(init_mm);
+EXPORT_SYMBOL(init_mm);
+
+union thread_union init_thread_union
+ __attribute__((__section__(".data.init_task"))) =
+{ INIT_THREAD_INFO(init_task) };
+
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/page.h>
+#include <linux/io.h>
+
+#include <asm/prom.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_SELFMOD_INTC
+#include <asm/selfmod.h>
+#define INTC_BASE BARRIER_BASE_ADDR
+#else
+static unsigned int intc_baseaddr;
+#define INTC_BASE intc_baseaddr
+#endif
+
+unsigned int nr_irq;
+
+/* No one else should require these constants, so define them locally here. */
+#define ISR 0x00 /* Interrupt Status Register */
+#define IPR 0x04 /* Interrupt Pending Register */
+#define IER 0x08 /* Interrupt Enable Register */
+#define IAR 0x0c /* Interrupt Acknowledge Register */
+#define SIE 0x10 /* Set Interrupt Enable bits */
+#define CIE 0x14 /* Clear Interrupt Enable bits */
+#define IVR 0x18 /* Interrupt Vector Register */
+#define MER 0x1c /* Master Enable Register */
+
+#define MER_ME (1<<0)
+#define MER_HIE (1<<1)
+
+static void intc_enable_or_unmask(unsigned int irq)
+{
+ pr_debug("enable_or_unmask: %d\n", irq);
+ out_be32(INTC_BASE + SIE, 1 << irq);
+}
+
+static void intc_disable_or_mask(unsigned int irq)
+{
+ pr_debug("disable: %d\n", irq);
+ out_be32(INTC_BASE + CIE, 1 << irq);
+}
+
+static void intc_ack(unsigned int irq)
+{
+ pr_debug("ack: %d\n", irq);
+ out_be32(INTC_BASE + IAR, 1 << irq);
+}
+
+static void intc_mask_ack(unsigned int irq)
+{
+ unsigned long mask = 1 << irq;
+ pr_debug("disable_and_ack: %d\n", irq);
+ out_be32(INTC_BASE + CIE, mask);
+ out_be32(INTC_BASE + IAR, mask);
+}
+
+static void intc_end(unsigned int irq)
+{
+ unsigned long mask = 1 << irq;
+ pr_debug("end: %d\n", irq);
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+ out_be32(INTC_BASE + SIE, mask);
+ /* ack level sensitive intr */
+ if (irq_desc[irq].status & IRQ_LEVEL)
+ out_be32(INTC_BASE + IAR, mask);
+ }
+}
+
+static struct irq_chip intc_dev = {
+ .name = "Xilinx INTC",
+ .unmask = intc_enable_or_unmask,
+ .mask = intc_disable_or_mask,
+ .ack = intc_ack,
+ .mask_ack = intc_mask_ack,
+ .end = intc_end,
+};
+
+unsigned int get_irq(struct pt_regs *regs)
+{
+ int irq;
+
+ /*
+ * NOTE: This function is the one that needs to be improved in
+ * order to handle multiple interrupt controllers. It currently
+ * is hardcoded to check for interrupts only on the first INTC.
+ */
+ irq = in_be32(INTC_BASE + IVR);
+ pr_debug("get_irq: %d\n", irq);
+
+ return irq;
+}
+
+void __init init_IRQ(void)
+{
+ u32 i, j, intr_type;
+ struct device_node *intc = NULL;
+#ifdef CONFIG_SELFMOD_INTC
+ unsigned int intc_baseaddr = 0;
+ static int arr_func[] = {
+ (int)&get_irq,
+ (int)&intc_enable_or_unmask,
+ (int)&intc_disable_or_mask,
+ (int)&intc_mask_ack,
+ (int)&intc_ack,
+ (int)&intc_end,
+ 0
+ };
+#endif
+ static char *intc_list[] = {
+ "xlnx,xps-intc-1.00.a",
+ "xlnx,opb-intc-1.00.c",
+ "xlnx,opb-intc-1.00.b",
+ "xlnx,opb-intc-1.00.a",
+ NULL
+ };
+
+ for (j = 0; intc_list[j] != NULL; j++) {
+ intc = of_find_compatible_node(NULL, NULL, intc_list[j]);
+ if (intc)
+ break;
+ }
+
+ intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
+ intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);
+ nr_irq = *(int *) of_get_property(intc, "xlnx,num-intr-inputs", NULL);
+
+ intr_type =
+ *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
+ if (intr_type >= (1 << (nr_irq + 1)))
+ printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
+
+#ifdef CONFIG_SELFMOD_INTC
+ selfmod_function((int *) arr_func, intc_baseaddr);
+#endif
+ printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n",
+ intc_list[j], intc_baseaddr, nr_irq, intr_type);
+
+ /*
+ * Disable all external interrupts until they are
+ * explicity requested.
+ */
+ out_be32(intc_baseaddr + IER, 0);
+
+ /* Acknowledge any pending interrupts just in case. */
+ out_be32(intc_baseaddr + IAR, 0xffffffff);
+
+ /* Turn on the Master Enable. */
+ out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
+
+ for (i = 0; i < nr_irq; ++i) {
+ if (intr_type & (0x00000001 << i)) {
+ set_irq_chip_and_handler_name(i, &intc_dev,
+ handle_edge_irq, intc_dev.name);
+ irq_desc[i].status &= ~IRQ_LEVEL;
+ } else {
+ set_irq_chip_and_handler_name(i, &intc_dev,
+ handle_level_irq, intc_dev.name);
+ irq_desc[i].status |= IRQ_LEVEL;
+ }
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
+#include <linux/irqflags.h>
+#include <linux/seq_file.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+
+#include <asm/prom.h>
+
+unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
+{
+ struct of_irq oirq;
+
+ if (of_irq_map_one(dev, index, &oirq))
+ return NO_IRQ;
+
+ return oirq.specifier[0];
+}
+EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
+
+/*
+ * 'what should we do if we get a hw irq event on an illegal vector'.
+ * each architecture has to answer this themselves.
+ */
+void ack_bad_irq(unsigned int irq)
+{
+ printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+static u32 concurrent_irq;
+
+void do_IRQ(struct pt_regs *regs)
+{
+ unsigned int irq;
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ irq_enter();
+ irq = get_irq(regs);
+next_irq:
+ BUG_ON(irq == -1U);
+ generic_handle_irq(irq);
+
+ irq = get_irq(regs);
+ if (irq != -1U) {
+ pr_debug("next irq: %d\n", irq);
+ ++concurrent_irq;
+ goto next_irq;
+ }
+
+ irq_exit();
+ set_irq_regs(old_regs);
+}
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j;
+ struct irqaction *action;
+ unsigned long flags;
+
+ if (i == 0) {
+ seq_printf(p, " ");
+ for_each_online_cpu(j)
+ seq_printf(p, "CPU%-8d", j);
+ seq_putc(p, '\n');
+ }
+
+ if (i < nr_irq) {
+ spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto skip;
+ seq_printf(p, "%3d: ", i);
+#ifndef CONFIG_SMP
+ seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
+#endif
+ seq_printf(p, " %8s", irq_desc[i].status &
+ IRQ_LEVEL ? "level" : "edge");
+ seq_printf(p, " %8s", irq_desc[i].chip->name);
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+skip:
+ spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ }
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+
+#include <asm/checksum.h>
+#include <linux/io.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <linux/uaccess.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+EXPORT_SYMBOL(__ashldi3);
+extern void __ashrdi3(void);
+EXPORT_SYMBOL(__ashrdi3);
+extern void __divsi3(void);
+EXPORT_SYMBOL(__divsi3);
+extern void __lshrdi3(void);
+EXPORT_SYMBOL(__lshrdi3);
+extern void __modsi3(void);
+EXPORT_SYMBOL(__modsi3);
+extern void __mulsi3(void);
+EXPORT_SYMBOL(__mulsi3);
+extern void __muldi3(void);
+EXPORT_SYMBOL(__muldi3);
+extern void __ucmpdi2(void);
+EXPORT_SYMBOL(__ucmpdi2);
+extern void __udivsi3(void);
+EXPORT_SYMBOL(__udivsi3);
+extern void __umodsi3(void);
+EXPORT_SYMBOL(__umodsi3);
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleloader.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+
+#include <asm/pgtable.h>
+
+void *module_alloc(unsigned long size)
+{
+ void *ret;
+ ret = (size == 0) ? NULL : vmalloc(size);
+ pr_debug("module_alloc (%08lx@%08lx)\n", size, (unsigned long int)ret);
+ return ret;
+}
+
+void module_free(struct module *module, void *region)
+{
+ pr_debug("module_free(%s,%08lx)\n", module->name,
+ (unsigned long)region);
+ vfree(region);
+}
+
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec, struct module *module)
+{
+ printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n",
+ module->name);
+ return -ENOEXEC;
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec, struct module *module)
+{
+
+ unsigned int i;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+ Elf32_Sym *sym;
+ unsigned long int *location;
+ unsigned long int locoffs;
+ unsigned long int value;
+#if __GNUC__ < 4
+ unsigned long int old_value;
+#endif
+
+ pr_debug("Applying add relocation section %u to %u\n",
+ relsec, sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr +
+ rela[i].r_offset;
+ sym = (Elf32_Sym *)sechdrs[symindex].sh_addr +
+ ELF32_R_SYM(rela[i].r_info);
+ value = sym->st_value + rela[i].r_addend;
+
+ switch (ELF32_R_TYPE(rela[i].r_info)) {
+
+ /*
+ * Be careful! mb-gcc / mb-ld splits the relocs between the
+ * text and the reloc table. In general this means we must
+ * read the current contents of (*location), add any offset
+ * then store the result back in
+ */
+
+ case R_MICROBLAZE_32:
+#if __GNUC__ < 4
+ old_value = *location;
+ *location = value + old_value;
+
+ pr_debug("R_MICROBLAZE_32 (%08lx->%08lx)\n",
+ old_value, value);
+#else
+ *location = value;
+#endif
+ break;
+
+ case R_MICROBLAZE_64:
+#if __GNUC__ < 4
+ /* Split relocs only required/used pre gcc4.1.1 */
+ old_value = ((location[0] & 0x0000FFFF) << 16) |
+ (location[1] & 0x0000FFFF);
+ value += old_value;
+#endif
+ location[0] = (location[0] & 0xFFFF0000) |
+ (value >> 16);
+ location[1] = (location[1] & 0xFFFF0000) |
+ (value & 0xFFFF);
+#if __GNUC__ < 4
+ pr_debug("R_MICROBLAZE_64 (%08lx->%08lx)\n",
+ old_value, value);
+#endif
+ break;
+
+ case R_MICROBLAZE_64_PCREL:
+ locoffs = (location[0] & 0xFFFF) << 16 |
+ (location[1] & 0xFFFF);
+ value -= (unsigned long int)(location) + 4 +
+ locoffs;
+ location[0] = (location[0] & 0xFFFF0000) |
+ (value >> 16);
+ location[1] = (location[1] & 0xFFFF0000) |
+ (value & 0xFFFF);
+ pr_debug("R_MICROBLAZE_64_PCREL (%08lx)\n",
+ value);
+ break;
+
+ case R_MICROBLAZE_NONE:
+ pr_debug("R_MICROBLAZE_NONE\n");
+ break;
+
+ default:
+ printk(KERN_ERR "module %s: "
+ "Unknown relocation: %u\n",
+ module->name,
+ ELF32_R_TYPE(rela->r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *module)
+{
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
--- /dev/null
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+
+#include <linux/errno.h>
+
+void of_device_make_bus_id(struct of_device *dev)
+{
+ static atomic_t bus_no_reg_magic;
+ struct device_node *node = dev->node;
+ const u32 *reg;
+ u64 addr;
+ int magic;
+
+ /*
+ * For MMIO, get the physical address
+ */
+ reg = of_get_property(node, "reg", NULL);
+ if (reg) {
+ addr = of_translate_address(node, reg);
+ if (addr != OF_BAD_ADDR) {
+ dev_set_name(&dev->dev, "%llx.%s",
+ (unsigned long long)addr, node->name);
+ return;
+ }
+ }
+
+ /*
+ * No BusID, use the node name and add a globally incremented
+ * counter (and pray...)
+ */
+ magic = atomic_add_return(1, &bus_no_reg_magic);
+ dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
+}
+EXPORT_SYMBOL(of_device_make_bus_id);
+
+struct of_device *of_device_alloc(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
+{
+ struct of_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ dev->node = of_node_get(np);
+ dev->dev.dma_mask = &dev->dma_mask;
+ dev->dev.parent = parent;
+ dev->dev.release = of_release_dev;
+ dev->dev.archdata.of_node = np;
+
+ if (bus_id)
+ dev_set_name(&dev->dev, bus_id);
+ else
+ of_device_make_bus_id(dev);
+
+ return dev;
+}
+EXPORT_SYMBOL(of_device_alloc);
+
+int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct of_device *ofdev;
+ const char *compat;
+ int seen = 0, cplen, sl;
+
+ if (!dev)
+ return -ENODEV;
+
+ ofdev = to_of_device(dev);
+
+ if (add_uevent_var(env, "OF_NAME=%s", ofdev->node->name))
+ return -ENOMEM;
+
+ if (add_uevent_var(env, "OF_TYPE=%s", ofdev->node->type))
+ return -ENOMEM;
+
+ /* Since the compatible field can contain pretty much anything
+ * it's not really legal to split it out with commas. We split it
+ * up using a number of environment variables instead. */
+
+ compat = of_get_property(ofdev->node, "compatible", &cplen);
+ while (compat && *compat && cplen > 0) {
+ if (add_uevent_var(env, "OF_COMPATIBLE_%d=%s", seen, compat))
+ return -ENOMEM;
+
+ sl = strlen(compat) + 1;
+ compat += sl;
+ cplen -= sl;
+ seen++;
+ }
+
+ if (add_uevent_var(env, "OF_COMPATIBLE_N=%d", seen))
+ return -ENOMEM;
+
+ /* modalias is trickier, we add it in 2 steps */
+ if (add_uevent_var(env, "MODALIAS="))
+ return -ENOMEM;
+ sl = of_device_get_modalias(ofdev, &env->buf[env->buflen-1],
+ sizeof(env->buf) - env->buflen);
+ if (sl >= (sizeof(env->buf) - env->buflen))
+ return -ENOMEM;
+ env->buflen += sl;
+
+ return 0;
+}
+EXPORT_SYMBOL(of_device_uevent);
--- /dev/null
+/*
+ * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ * <benh@kernel.crashing.org>
+ * and Arnd Bergmann, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#include <linux/errno.h>
+#include <linux/topology.h>
+#include <asm/atomic.h>
+
+struct bus_type of_platform_bus_type = {
+ .uevent = of_device_uevent,
+};
+EXPORT_SYMBOL(of_platform_bus_type);
+
+static int __init of_bus_driver_init(void)
+{
+ return of_bus_type_init(&of_platform_bus_type, "of_platform");
+}
+postcore_initcall(of_bus_driver_init);
+
+struct of_device *of_platform_device_create(struct device_node *np,
+ const char *bus_id,
+ struct device *parent)
+{
+ struct of_device *dev;
+
+ dev = of_device_alloc(np, bus_id, parent);
+ if (!dev)
+ return NULL;
+
+ dev->dma_mask = 0xffffffffUL;
+ dev->dev.bus = &of_platform_bus_type;
+
+ /* We do not fill the DMA ops for platform devices by default.
+ * This is currently the responsibility of the platform code
+ * to do such, possibly using a device notifier
+ */
+
+ if (of_device_register(dev) != 0) {
+ of_device_free(dev);
+ return NULL;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL(of_platform_device_create);
+
+/**
+ * of_platform_bus_create - Create an OF device for a bus node and all its
+ * children. Optionally recursively instanciate matching busses.
+ * @bus: device node of the bus to instanciate
+ * @matches: match table, NULL to use the default, OF_NO_DEEP_PROBE to
+ * disallow recursive creation of child busses
+ */
+static int of_platform_bus_create(const struct device_node *bus,
+ const struct of_device_id *matches,
+ struct device *parent)
+{
+ struct device_node *child;
+ struct of_device *dev;
+ int rc = 0;
+
+ for_each_child_of_node(bus, child) {
+ pr_debug(" create child: %s\n", child->full_name);
+ dev = of_platform_device_create(child, NULL, parent);
+ if (dev == NULL)
+ rc = -ENOMEM;
+ else if (!of_match_node(matches, child))
+ continue;
+ if (rc == 0) {
+ pr_debug(" and sub busses\n");
+ rc = of_platform_bus_create(child, matches, &dev->dev);
+ }
+ if (rc) {
+ of_node_put(child);
+ break;
+ }
+ }
+ return rc;
+}
+
+
+/**
+ * of_platform_bus_probe - Probe the device-tree for platform busses
+ * @root: parent of the first level to probe or NULL for the root of the tree
+ * @matches: match table, NULL to use the default
+ * @parent: parent to hook devices from, NULL for toplevel
+ *
+ * Note that children of the provided root are not instanciated as devices
+ * unless the specified root itself matches the bus list and is not NULL.
+ */
+
+int of_platform_bus_probe(struct device_node *root,
+ const struct of_device_id *matches,
+ struct device *parent)
+{
+ struct device_node *child;
+ struct of_device *dev;
+ int rc = 0;
+
+ if (matches == NULL)
+ matches = of_default_bus_ids;
+ if (matches == OF_NO_DEEP_PROBE)
+ return -EINVAL;
+ if (root == NULL)
+ root = of_find_node_by_path("/");
+ else
+ of_node_get(root);
+
+ pr_debug("of_platform_bus_probe()\n");
+ pr_debug(" starting at: %s\n", root->full_name);
+
+ /* Do a self check of bus type, if there's a match, create
+ * children
+ */
+ if (of_match_node(matches, root)) {
+ pr_debug(" root match, create all sub devices\n");
+ dev = of_platform_device_create(root, NULL, parent);
+ if (dev == NULL) {
+ rc = -ENOMEM;
+ goto bail;
+ }
+ pr_debug(" create all sub busses\n");
+ rc = of_platform_bus_create(root, matches, &dev->dev);
+ goto bail;
+ }
+ for_each_child_of_node(root, child) {
+ if (!of_match_node(matches, child))
+ continue;
+
+ pr_debug(" match: %s\n", child->full_name);
+ dev = of_platform_device_create(child, NULL, parent);
+ if (dev == NULL)
+ rc = -ENOMEM;
+ else
+ rc = of_platform_bus_create(child, matches, &dev->dev);
+ if (rc) {
+ of_node_put(child);
+ break;
+ }
+ }
+ bail:
+ of_node_put(root);
+ return rc;
+}
+EXPORT_SYMBOL(of_platform_bus_probe);
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+ return to_of_device(dev)->node == data;
+}
+
+struct of_device *of_find_device_by_node(struct device_node *np)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&of_platform_bus_type,
+ NULL, np, of_dev_node_match);
+ if (dev)
+ return to_of_device(dev);
+ return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_node);
+
+static int of_dev_phandle_match(struct device *dev, void *data)
+{
+ phandle *ph = data;
+ return to_of_device(dev)->node->linux_phandle == *ph;
+}
+
+struct of_device *of_find_device_by_phandle(phandle ph)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&of_platform_bus_type,
+ NULL, &ph, of_dev_phandle_match);
+ if (dev)
+ return to_of_device(dev);
+ return NULL;
+}
+EXPORT_SYMBOL(of_find_device_by_phandle);
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/tick.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+
+void show_regs(struct pt_regs *regs)
+{
+ printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode);
+ printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
+ regs->r1, regs->r2, regs->r3, regs->r4);
+ printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
+ regs->r5, regs->r6, regs->r7, regs->r8);
+ printk(KERN_INFO " r9=%08lX, r10=%08lX, r11=%08lX, r12=%08lX\n",
+ regs->r9, regs->r10, regs->r11, regs->r12);
+ printk(KERN_INFO " r13=%08lX, r14=%08lX, r15=%08lX, r16=%08lX\n",
+ regs->r13, regs->r14, regs->r15, regs->r16);
+ printk(KERN_INFO " r17=%08lX, r18=%08lX, r19=%08lX, r20=%08lX\n",
+ regs->r17, regs->r18, regs->r19, regs->r20);
+ printk(KERN_INFO " r21=%08lX, r22=%08lX, r23=%08lX, r24=%08lX\n",
+ regs->r21, regs->r22, regs->r23, regs->r24);
+ printk(KERN_INFO " r25=%08lX, r26=%08lX, r27=%08lX, r28=%08lX\n",
+ regs->r25, regs->r26, regs->r27, regs->r28);
+ printk(KERN_INFO " r29=%08lX, r30=%08lX, r31=%08lX, rPC=%08lX\n",
+ regs->r29, regs->r30, regs->r31, regs->pc);
+ printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
+ regs->msr, regs->ear, regs->esr, regs->fsr);
+}
+
+void (*pm_idle)(void);
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+static int hlt_counter = 1;
+
+void disable_hlt(void)
+{
+ hlt_counter++;
+}
+EXPORT_SYMBOL(disable_hlt);
+
+void enable_hlt(void)
+{
+ hlt_counter--;
+}
+EXPORT_SYMBOL(enable_hlt);
+
+static int __init nohlt_setup(char *__unused)
+{
+ hlt_counter = 1;
+ return 1;
+}
+__setup("nohlt", nohlt_setup);
+
+static int __init hlt_setup(char *__unused)
+{
+ hlt_counter = 0;
+ return 1;
+}
+__setup("hlt", hlt_setup);
+
+void default_idle(void)
+{
+ if (!hlt_counter) {
+ clear_thread_flag(TIF_POLLING_NRFLAG);
+ smp_mb__after_clear_bit();
+ local_irq_disable();
+ while (!need_resched())
+ cpu_sleep();
+ local_irq_enable();
+ set_thread_flag(TIF_POLLING_NRFLAG);
+ } else
+ while (!need_resched())
+ cpu_relax();
+}
+
+void cpu_idle(void)
+{
+ set_thread_flag(TIF_POLLING_NRFLAG);
+
+ /* endless idle loop with no priority at all */
+ while (1) {
+ void (*idle)(void) = pm_idle;
+
+ if (!idle)
+ idle = default_idle;
+
+ tick_nohz_stop_sched_tick(1);
+ while (!need_resched())
+ idle();
+ tick_nohz_restart_sched_tick();
+
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ check_pgt_cache();
+ }
+}
+
+void flush_thread(void)
+{
+}
+
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+ unsigned long unused,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs = task_pt_regs(p);
+ struct thread_info *ti = task_thread_info(p);
+
+ *childregs = *regs;
+ if (user_mode(regs))
+ childregs->r1 = usp;
+ else
+ childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
+
+ memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
+ ti->cpu_context.r1 = (unsigned long)childregs;
+ ti->cpu_context.msr = (unsigned long)childregs->msr;
+ ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
+
+ if (clone_flags & CLONE_SETTLS)
+ ;
+
+ return 0;
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+unsigned long thread_saved_pc(struct task_struct *tsk)
+{
+ struct cpu_context *ctx =
+ &(((struct thread_info *)(tsk->stack))->cpu_context);
+
+ /* Check whether the thread is blocked in resume() */
+ if (in_sched_functions(ctx->r15))
+ return (unsigned long)ctx->r15;
+ else
+ return ctx->r14;
+}
+
+static void kernel_thread_helper(int (*fn)(void *), void *arg)
+{
+ fn(arg);
+ do_exit(-1);
+}
+
+int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(®s, 0, sizeof(regs));
+ /* store them in non-volatile registers */
+ regs.r5 = (unsigned long)fn;
+ regs.r6 = (unsigned long)arg;
+ local_save_flags(regs.msr);
+ regs.pc = (unsigned long)kernel_thread_helper;
+ regs.pt_mode = 1;
+
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+ ®s, 0, NULL, NULL);
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+/* TBD (used by procfs) */
+ return 0;
+}
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+ set_fs(USER_DS);
+ regs->pc = pc;
+ regs->r1 = usp;
+ regs->pt_mode = 0;
+}
--- /dev/null
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ * {engebret|bergner}@us.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/stringify.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/debugfs.h>
+#include <linux/irq.h>
+#include <linux/lmb.h>
+
+#include <asm/prom.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+
+static int __initdata dt_root_addr_cells;
+static int __initdata dt_root_size_cells;
+
+typedef u32 cell_t;
+
+static struct boot_param_header *initial_boot_params;
+
+/* export that to outside world */
+struct device_node *of_chosen;
+
+static inline char *find_flat_dt_string(u32 offset)
+{
+ return ((char *)initial_boot_params) +
+ initial_boot_params->off_dt_strings + offset;
+}
+
+/**
+ * This function is used to scan the flattened device-tree, it is
+ * used to extract the memory informations at boot before we can
+ * unflatten the tree
+ */
+int __init of_scan_flat_dt(int (*it)(unsigned long node,
+ const char *uname, int depth,
+ void *data),
+ void *data)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ int rc = 0;
+ int depth = -1;
+
+ do {
+ u32 tag = *((u32 *)p);
+ char *pathp;
+
+ p += 4;
+ if (tag == OF_DT_END_NODE) {
+ depth--;
+ continue;
+ }
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag == OF_DT_END)
+ break;
+ if (tag == OF_DT_PROP) {
+ u32 sz = *((u32 *)p);
+ p += 8;
+ if (initial_boot_params->version < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+ p += sz;
+ p = _ALIGN(p, 4);
+ continue;
+ }
+ if (tag != OF_DT_BEGIN_NODE) {
+ printk(KERN_WARNING "Invalid tag %x scanning flattened"
+ " device tree !\n", tag);
+ return -EINVAL;
+ }
+ depth++;
+ pathp = (char *)p;
+ p = _ALIGN(p + strlen(pathp) + 1, 4);
+ if ((*pathp) == '/') {
+ char *lp, *np;
+ for (lp = NULL, np = pathp; *np; np++)
+ if ((*np) == '/')
+ lp = np+1;
+ if (lp != NULL)
+ pathp = lp;
+ }
+ rc = it(p, pathp, depth, data);
+ if (rc != 0)
+ break;
+ } while (1);
+
+ return rc;
+}
+
+unsigned long __init of_get_flat_dt_root(void)
+{
+ unsigned long p = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+
+ while (*((u32 *)p) == OF_DT_NOP)
+ p += 4;
+ BUG_ON(*((u32 *)p) != OF_DT_BEGIN_NODE);
+ p += 4;
+ return _ALIGN(p + strlen((char *)p) + 1, 4);
+}
+
+/**
+ * This function can be used within scan_flattened_dt callback to get
+ * access to properties
+ */
+void *__init of_get_flat_dt_prop(unsigned long node, const char *name,
+ unsigned long *size)
+{
+ unsigned long p = node;
+
+ do {
+ u32 tag = *((u32 *)p);
+ u32 sz, noff;
+ const char *nstr;
+
+ p += 4;
+ if (tag == OF_DT_NOP)
+ continue;
+ if (tag != OF_DT_PROP)
+ return NULL;
+
+ sz = *((u32 *)p);
+ noff = *((u32 *)(p + 4));
+ p += 8;
+ if (initial_boot_params->version < 0x10)
+ p = _ALIGN(p, sz >= 8 ? 8 : 4);
+
+ nstr = find_flat_dt_string(noff);
+ if (nstr == NULL) {
+ printk(KERN_WARNING "Can't find property index"
+ " name !\n");
+ return NULL;
+ }
+ if (strcmp(name, nstr) == 0) {
+ if (size)
+ *size = sz;
+ return (void *)p;
+ }
+ p += sz;
+ p = _ALIGN(p, 4);
+ } while (1);
+}
+
+int __init of_flat_dt_is_compatible(unsigned long node, const char *compat)
+{
+ const char *cp;
+ unsigned long cplen, l;
+
+ cp = of_get_flat_dt_prop(node, "compatible", &cplen);
+ if (cp == NULL)
+ return 0;
+ while (cplen > 0) {
+ if (strncasecmp(cp, compat, strlen(compat)) == 0)
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
+static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+ unsigned long align)
+{
+ void *res;
+
+ *mem = _ALIGN(*mem, align);
+ res = (void *)*mem;
+ *mem += size;
+
+ return res;
+}
+
+static unsigned long __init unflatten_dt_node(unsigned long mem,
+ unsigned long *p,
+ struct device_node *dad,
+ struct device_node ***allnextpp,
+ unsigned long fpsize)
+{
+ struct device_node *np;
+ struct property *pp, **prev_pp = NULL;
+ char *pathp;
+ u32 tag;
+ unsigned int l, allocl;
+ int has_name = 0;
+ int new_format = 0;
+
+ tag = *((u32 *)(*p));
+ if (tag != OF_DT_BEGIN_NODE) {
+ printk("Weird tag at start of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ pathp = (char *)*p;
+ l = allocl = strlen(pathp) + 1;
+ *p = _ALIGN(*p + l, 4);
+
+ /* version 0x10 has a more compact unit name here instead of the full
+ * path. we accumulate the full path size using "fpsize", we'll rebuild
+ * it later. We detect this because the first character of the name is
+ * not '/'.
+ */
+ if ((*pathp) != '/') {
+ new_format = 1;
+ if (fpsize == 0) {
+ /* root node: special case. fpsize accounts for path
+ * plus terminating zero. root node only has '/', so
+ * fpsize should be 2, but we want to avoid the first
+ * level nodes to have two '/' so we use fpsize 1 here
+ */
+ fpsize = 1;
+ allocl = 2;
+ } else {
+ /* account for '/' and path size minus terminal 0
+ * already in 'l'
+ */
+ fpsize += l;
+ allocl = fpsize;
+ }
+ }
+
+ np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl,
+ __alignof__(struct device_node));
+ if (allnextpp) {
+ memset(np, 0, sizeof(*np));
+ np->full_name = ((char *)np) + sizeof(struct device_node);
+ if (new_format) {
+ char *p2 = np->full_name;
+ /* rebuild full path for new format */
+ if (dad && dad->parent) {
+ strcpy(p2, dad->full_name);
+#ifdef DEBUG
+ if ((strlen(p2) + l + 1) != allocl) {
+ pr_debug("%s: p: %d, l: %d, a: %d\n",
+ pathp, (int)strlen(p2),
+ l, allocl);
+ }
+#endif
+ p2 += strlen(p2);
+ }
+ *(p2++) = '/';
+ memcpy(p2, pathp, l);
+ } else
+ memcpy(np->full_name, pathp, l);
+ prev_pp = &np->properties;
+ **allnextpp = np;
+ *allnextpp = &np->allnext;
+ if (dad != NULL) {
+ np->parent = dad;
+ /* we temporarily use the next field as `last_child'*/
+ if (dad->next == NULL)
+ dad->child = np;
+ else
+ dad->next->sibling = np;
+ dad->next = np;
+ }
+ kref_init(&np->kref);
+ }
+ while (1) {
+ u32 sz, noff;
+ char *pname;
+
+ tag = *((u32 *)(*p));
+ if (tag == OF_DT_NOP) {
+ *p += 4;
+ continue;
+ }
+ if (tag != OF_DT_PROP)
+ break;
+ *p += 4;
+ sz = *((u32 *)(*p));
+ noff = *((u32 *)((*p) + 4));
+ *p += 8;
+ if (initial_boot_params->version < 0x10)
+ *p = _ALIGN(*p, sz >= 8 ? 8 : 4);
+
+ pname = find_flat_dt_string(noff);
+ if (pname == NULL) {
+ printk(KERN_INFO
+ "Can't find property name in list !\n");
+ break;
+ }
+ if (strcmp(pname, "name") == 0)
+ has_name = 1;
+ l = strlen(pname) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property),
+ __alignof__(struct property));
+ if (allnextpp) {
+ if (strcmp(pname, "linux,phandle") == 0) {
+ np->node = *((u32 *)*p);
+ if (np->linux_phandle == 0)
+ np->linux_phandle = np->node;
+ }
+ if (strcmp(pname, "ibm,phandle") == 0)
+ np->linux_phandle = *((u32 *)*p);
+ pp->name = pname;
+ pp->length = sz;
+ pp->value = (void *)*p;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ }
+ *p = _ALIGN((*p) + sz, 4);
+ }
+ /* with version 0x10 we may not have the name property, recreate
+ * it here from the unit name if absent
+ */
+ if (!has_name) {
+ char *p1 = pathp, *ps = pathp, *pa = NULL;
+ int sz;
+
+ while (*p1) {
+ if ((*p1) == '@')
+ pa = p1;
+ if ((*p1) == '/')
+ ps = p1 + 1;
+ p1++;
+ }
+ if (pa < ps)
+ pa = p1;
+ sz = (pa - ps) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz,
+ __alignof__(struct property));
+ if (allnextpp) {
+ pp->name = "name";
+ pp->length = sz;
+ pp->value = pp + 1;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ memcpy(pp->value, ps, sz - 1);
+ ((char *)pp->value)[sz - 1] = 0;
+ pr_debug("fixed up name for %s -> %s\n", pathp,
+ (char *)pp->value);
+ }
+ }
+ if (allnextpp) {
+ *prev_pp = NULL;
+ np->name = of_get_property(np, "name", NULL);
+ np->type = of_get_property(np, "device_type", NULL);
+
+ if (!np->name)
+ np->name = "<NULL>";
+ if (!np->type)
+ np->type = "<NULL>";
+ }
+ while (tag == OF_DT_BEGIN_NODE) {
+ mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize);
+ tag = *((u32 *)(*p));
+ }
+ if (tag != OF_DT_END_NODE) {
+ printk(KERN_INFO "Weird tag at end of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ return mem;
+}
+
+/**
+ * unflattens the device-tree passed by the firmware, creating the
+ * tree of struct device_node. It also fills the "name" and "type"
+ * pointers of the nodes so the normal device-tree walking functions
+ * can be used (this used to be done by finish_device_tree)
+ */
+void __init unflatten_device_tree(void)
+{
+ unsigned long start, mem, size;
+ struct device_node **allnextp = &allnodes;
+
+ pr_debug(" -> unflatten_device_tree()\n");
+
+ /* First pass, scan for size */
+ start = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ size = unflatten_dt_node(0, &start, NULL, NULL, 0);
+ size = (size | 3) + 1;
+
+ pr_debug(" size is %lx, allocating...\n", size);
+
+ /* Allocate memory for the expanded device tree */
+ mem = lmb_alloc(size + 4, __alignof__(struct device_node));
+ mem = (unsigned long) __va(mem);
+
+ ((u32 *)mem)[size / 4] = 0xdeadbeef;
+
+ pr_debug(" unflattening %lx...\n", mem);
+
+ /* Second pass, do actual unflattening */
+ start = ((unsigned long)initial_boot_params) +
+ initial_boot_params->off_dt_struct;
+ unflatten_dt_node(mem, &start, NULL, &allnextp, 0);
+ if (*((u32 *)start) != OF_DT_END)
+ printk(KERN_WARNING "Weird tag at end of tree: %08x\n",
+ *((u32 *)start));
+ if (((u32 *)mem)[size / 4] != 0xdeadbeef)
+ printk(KERN_WARNING "End of tree marker overwritten: %08x\n",
+ ((u32 *)mem)[size / 4]);
+ *allnextp = NULL;
+
+ /* Get pointer to OF "/chosen" node for use everywhere */
+ of_chosen = of_find_node_by_path("/chosen");
+ if (of_chosen == NULL)
+ of_chosen = of_find_node_by_path("/chosen@0");
+
+ pr_debug(" <- unflatten_device_tree()\n");
+}
+
+#define early_init_dt_scan_drconf_memory(node) 0
+
+static int __init early_init_dt_scan_cpus(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ static int logical_cpuid;
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const u32 *intserv;
+ int i, nthreads;
+ int found = 0;
+
+ /* We are scanning "cpu" nodes only */
+ if (type == NULL || strcmp(type, "cpu") != 0)
+ return 0;
+
+ /* Get physical cpuid */
+ intserv = of_get_flat_dt_prop(node, "reg", NULL);
+ nthreads = 1;
+
+ /*
+ * Now see if any of these threads match our boot cpu.
+ * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+ */
+ for (i = 0; i < nthreads; i++) {
+ /*
+ * version 2 of the kexec param format adds the phys cpuid of
+ * booted proc.
+ */
+ if (initial_boot_params && initial_boot_params->version >= 2) {
+ if (intserv[i] ==
+ initial_boot_params->boot_cpuid_phys) {
+ found = 1;
+ break;
+ }
+ } else {
+ /*
+ * Check if it's the boot-cpu, set it's hw index now,
+ * unfortunately this format did not support booting
+ * off secondary threads.
+ */
+ if (of_get_flat_dt_prop(node,
+ "linux,boot-cpu", NULL) != NULL) {
+ found = 1;
+ break;
+ }
+ }
+
+#ifdef CONFIG_SMP
+ /* logical cpu id is always 0 on UP kernels */
+ logical_cpuid++;
+#endif
+ }
+
+ if (found) {
+ pr_debug("boot cpu: logical %d physical %d\n", logical_cpuid,
+ intserv[i]);
+ boot_cpuid = logical_cpuid;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+static void __init early_init_dt_check_for_initrd(unsigned long node)
+{
+ unsigned long l;
+ u32 *prop;
+
+ pr_debug("Looking for initrd properties... ");
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
+ if (prop) {
+ initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
+
+ prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
+ if (prop) {
+ initrd_end = (unsigned long)
+ __va(of_read_ulong(prop, l/4));
+ initrd_below_start_ok = 1;
+ } else {
+ initrd_start = 0;
+ }
+ }
+
+ pr_debug("initrd_start=0x%lx initrd_end=0x%lx\n",
+ initrd_start, initrd_end);
+}
+#else
+static inline void early_init_dt_check_for_initrd(unsigned long node)
+{
+}
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+static int __init early_init_dt_scan_chosen(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ unsigned long l;
+ char *p;
+
+ pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+ if (depth != 1 ||
+ (strcmp(uname, "chosen") != 0 &&
+ strcmp(uname, "chosen@0") != 0))
+ return 0;
+
+#ifdef CONFIG_KEXEC
+ lprop = (u64 *)of_get_flat_dt_prop(node,
+ "linux,crashkernel-base", NULL);
+ if (lprop)
+ crashk_res.start = *lprop;
+
+ lprop = (u64 *)of_get_flat_dt_prop(node,
+ "linux,crashkernel-size", NULL);
+ if (lprop)
+ crashk_res.end = crashk_res.start + *lprop - 1;
+#endif
+
+ early_init_dt_check_for_initrd(node);
+
+ /* Retreive command line */
+ p = of_get_flat_dt_prop(node, "bootargs", &l);
+ if (p != NULL && l > 0)
+ strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
+
+#ifdef CONFIG_CMDLINE
+ if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
+ strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif /* CONFIG_CMDLINE */
+
+ pr_debug("Command line is: %s\n", cmd_line);
+
+ /* break now */
+ return 1;
+}
+
+static int __init early_init_dt_scan_root(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ u32 *prop;
+
+ if (depth != 0)
+ return 0;
+
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ dt_root_size_cells = (prop == NULL) ? 1 : *prop;
+ pr_debug("dt_root_size_cells = %x\n", dt_root_size_cells);
+
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ dt_root_addr_cells = (prop == NULL) ? 2 : *prop;
+ pr_debug("dt_root_addr_cells = %x\n", dt_root_addr_cells);
+
+ /* break now */
+ return 1;
+}
+
+static u64 __init dt_mem_next_cell(int s, cell_t **cellp)
+{
+ cell_t *p = *cellp;
+
+ *cellp = p + s;
+ return of_read_number(p, s);
+}
+
+static int __init early_init_dt_scan_memory(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ cell_t *reg, *endp;
+ unsigned long l;
+
+ /* Look for the ibm,dynamic-reconfiguration-memory node */
+/* if (depth == 1 &&
+ strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+ return early_init_dt_scan_drconf_memory(node);
+*/
+ /* We are scanning "memory" nodes only */
+ if (type == NULL) {
+ /*
+ * The longtrail doesn't have a device_type on the
+ * /memory node, so look for the node called /memory@0.
+ */
+ if (depth != 1 || strcmp(uname, "memory@0") != 0)
+ return 0;
+ } else if (strcmp(type, "memory") != 0)
+ return 0;
+
+ reg = (cell_t *)of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(cell_t));
+
+ pr_debug("memory scan node %s, reg size %ld, data: %x %x %x %x,\n",
+ uname, l, reg[0], reg[1], reg[2], reg[3]);
+
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, ®);
+ size = dt_mem_next_cell(dt_root_size_cells, ®);
+
+ if (size == 0)
+ continue;
+ pr_debug(" - %llx , %llx\n", (unsigned long long)base,
+ (unsigned long long)size);
+
+ lmb_add(base, size);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+ unsigned long tmp;
+
+ if (phyp_dump_info->reserve_bootvar)
+ return phyp_dump_info->reserve_bootvar;
+
+ /* divide by 20 to get 5% of value */
+ tmp = lmb_end_of_DRAM();
+ do_div(tmp, 20);
+
+ /* round it down in multiples of 256 */
+ tmp = tmp & ~0x0FFFFFFFUL;
+
+ return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+ unsigned long base, size;
+ unsigned long variable_reserve_size;
+
+ if (!phyp_dump_info->phyp_dump_configured) {
+ printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+ return;
+ }
+
+ if (!phyp_dump_info->phyp_dump_at_boot) {
+ printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+ return;
+ }
+
+ variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+ if (phyp_dump_info->phyp_dump_is_active) {
+ /* Reserve *everything* above RMR.Area freed by userland tools*/
+ base = variable_reserve_size;
+ size = lmb_end_of_DRAM() - base;
+
+ /* XXX crashed_ram_end is wrong, since it may be beyond
+ * the memory_limit, it will need to be adjusted. */
+ lmb_reserve(base, size);
+
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ } else {
+ size = phyp_dump_info->cpu_state_size +
+ phyp_dump_info->hpte_region_size +
+ variable_reserve_size;
+ base = lmb_end_of_DRAM() - size;
+ lmb_reserve(base, size);
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ }
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
+
+#ifdef CONFIG_EARLY_PRINTK
+/* MS this is Microblaze specifig function */
+static int __init early_init_dt_scan_serial(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ unsigned long l;
+ char *p;
+ int *addr;
+
+ pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname);
+
+/* find all serial nodes */
+ if (strncmp(uname, "serial", 6) != 0)
+ return 0;
+
+ early_init_dt_check_for_initrd(node);
+
+/* find compatible node with uartlite */
+ p = of_get_flat_dt_prop(node, "compatible", &l);
+ if ((strncmp(p, "xlnx,xps-uartlite", 17) != 0) &&
+ (strncmp(p, "xlnx,opb-uartlite", 17) != 0))
+ return 0;
+
+ addr = of_get_flat_dt_prop(node, "reg", &l);
+ return *addr; /* return address */
+}
+
+/* this function is looking for early uartlite console - Microblaze specific */
+int __init early_uartlite_console(void)
+{
+ return of_scan_flat_dt(early_init_dt_scan_serial, NULL);
+}
+#endif
+
+void __init early_init_devtree(void *params)
+{
+ pr_debug(" -> early_init_devtree(%p)\n", params);
+
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+#ifdef CONFIG_PHYP_DUMP
+ /* scan tree to see if dump occured during last boot */
+ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
+ /* Retrieve various informations from the /chosen node of the
+ * device-tree, including the platform type, initrd location and
+ * size, TCE reserve, and more ...
+ */
+ of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
+
+ /* Scan memory nodes and rebuild LMBs */
+ lmb_init();
+ of_scan_flat_dt(early_init_dt_scan_root, NULL);
+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+
+ /* Save command line for /proc/cmdline and then parse parameters */
+ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+ parse_early_param();
+
+ lmb_analyze();
+
+ pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+
+ pr_debug("Scanning CPUs ...\n");
+
+ /* Retreive CPU related informations from the flat tree
+ * (altivec support, boot CPU ID, ...)
+ */
+ of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+
+ pr_debug(" <- early_init_devtree()\n");
+}
+
+/**
+ * Indicates whether the root node has a given value in its
+ * compatible property.
+ */
+int machine_is_compatible(const char *compat)
+{
+ struct device_node *root;
+ int rc = 0;
+
+ root = of_find_node_by_path("/");
+ if (root) {
+ rc = of_device_is_compatible(root, compat);
+ of_node_put(root);
+ }
+ return rc;
+}
+EXPORT_SYMBOL(machine_is_compatible);
+
+/*******
+ *
+ * New implementation of the OF "find" APIs, return a refcounted
+ * object, call of_node_put() when done. The device tree and list
+ * are protected by a rw_lock.
+ *
+ * Note that property management will need some locking as well,
+ * this isn't dealt with yet.
+ *
+ *******/
+
+/**
+ * of_find_node_by_phandle - Find a node given a phandle
+ * @handle: phandle of the node to find
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_node_by_phandle(phandle handle)
+{
+ struct device_node *np;
+
+ read_lock(&devtree_lock);
+ for (np = allnodes; np != NULL; np = np->allnext)
+ if (np->linux_phandle == handle)
+ break;
+ of_node_get(np);
+ read_unlock(&devtree_lock);
+ return np;
+}
+EXPORT_SYMBOL(of_find_node_by_phandle);
+
+/**
+ * of_find_all_nodes - Get next node in global list
+ * @prev: Previous node or NULL to start iteration
+ * of_node_put() will be called on it
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done.
+ */
+struct device_node *of_find_all_nodes(struct device_node *prev)
+{
+ struct device_node *np;
+
+ read_lock(&devtree_lock);
+ np = prev ? prev->allnext : allnodes;
+ for (; np != NULL; np = np->allnext)
+ if (of_node_get(np))
+ break;
+ of_node_put(prev);
+ read_unlock(&devtree_lock);
+ return np;
+}
+EXPORT_SYMBOL(of_find_all_nodes);
+
+/**
+ * of_node_get - Increment refcount of a node
+ * @node: Node to inc refcount, NULL is supported to
+ * simplify writing of callers
+ *
+ * Returns node.
+ */
+struct device_node *of_node_get(struct device_node *node)
+{
+ if (node)
+ kref_get(&node->kref);
+ return node;
+}
+EXPORT_SYMBOL(of_node_get);
+
+static inline struct device_node *kref_to_device_node(struct kref *kref)
+{
+ return container_of(kref, struct device_node, kref);
+}
+
+/**
+ * of_node_release - release a dynamically allocated node
+ * @kref: kref element of the node to be released
+ *
+ * In of_node_put() this function is passed to kref_put()
+ * as the destructor.
+ */
+static void of_node_release(struct kref *kref)
+{
+ struct device_node *node = kref_to_device_node(kref);
+ struct property *prop = node->properties;
+
+ /* We should never be releasing nodes that haven't been detached. */
+ if (!of_node_check_flag(node, OF_DETACHED)) {
+ printk(KERN_INFO "WARNING: Bad of_node_put() on %s\n",
+ node->full_name);
+ dump_stack();
+ kref_init(&node->kref);
+ return;
+ }
+
+ if (!of_node_check_flag(node, OF_DYNAMIC))
+ return;
+
+ while (prop) {
+ struct property *next = prop->next;
+ kfree(prop->name);
+ kfree(prop->value);
+ kfree(prop);
+ prop = next;
+
+ if (!prop) {
+ prop = node->deadprops;
+ node->deadprops = NULL;
+ }
+ }
+ kfree(node->full_name);
+ kfree(node->data);
+ kfree(node);
+}
+
+/**
+ * of_node_put - Decrement refcount of a node
+ * @node: Node to dec refcount, NULL is supported to
+ * simplify writing of callers
+ *
+ */
+void of_node_put(struct device_node *node)
+{
+ if (node)
+ kref_put(&node->kref, of_node_release);
+}
+EXPORT_SYMBOL(of_node_put);
+
+/*
+ * Plug a device node into the tree and global list.
+ */
+void of_attach_node(struct device_node *np)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ np->sibling = np->parent->child;
+ np->allnext = allnodes;
+ np->parent->child = np;
+ allnodes = np;
+ write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/*
+ * "Unplug" a node from the device tree. The caller must hold
+ * a reference to the node. The memory associated with the node
+ * is not freed until its refcount goes to zero.
+ */
+void of_detach_node(struct device_node *np)
+{
+ struct device_node *parent;
+ unsigned long flags;
+
+ write_lock_irqsave(&devtree_lock, flags);
+
+ parent = np->parent;
+ if (!parent)
+ goto out_unlock;
+
+ if (allnodes == np)
+ allnodes = np->allnext;
+ else {
+ struct device_node *prev;
+ for (prev = allnodes;
+ prev->allnext != np;
+ prev = prev->allnext)
+ ;
+ prev->allnext = np->allnext;
+ }
+
+ if (parent->child == np)
+ parent->child = np->sibling;
+ else {
+ struct device_node *prevsib;
+ for (prevsib = np->parent->child;
+ prevsib->sibling != np;
+ prevsib = prevsib->sibling)
+ ;
+ prevsib->sibling = np->sibling;
+ }
+
+ of_node_set_flag(np, OF_DETACHED);
+
+out_unlock:
+ write_unlock_irqrestore(&devtree_lock, flags);
+}
+
+/*
+ * Add a property to a node
+ */
+int prom_add_property(struct device_node *np, struct property *prop)
+{
+ struct property **next;
+ unsigned long flags;
+
+ prop->next = NULL;
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (strcmp(prop->name, (*next)->name) == 0) {
+ /* duplicate ! don't insert it */
+ write_unlock_irqrestore(&devtree_lock, flags);
+ return -1;
+ }
+ next = &(*next)->next;
+ }
+ *next = prop;
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_add_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+/*
+ * Remove a property from a node. Note that we don't actually
+ * remove it, since we have given out who-knows-how-many pointers
+ * to the data using get-property. Instead we just move the property
+ * to the "dead properties" list, so it won't be found any more.
+ */
+int prom_remove_property(struct device_node *np, struct property *prop)
+{
+ struct property **next;
+ unsigned long flags;
+ int found = 0;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (*next == prop) {
+ /* found the node */
+ *next = prop->next;
+ prop->next = np->deadprops;
+ np->deadprops = prop;
+ found = 1;
+ break;
+ }
+ next = &(*next)->next;
+ }
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+ if (!found)
+ return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to remove the proc node as well */
+ if (np->pde)
+ proc_device_tree_remove_prop(np->pde, prop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+/*
+ * Update a property in a node. Note that we don't actually
+ * remove it, since we have given out who-knows-how-many pointers
+ * to the data using get-property. Instead we just move the property
+ * to the "dead properties" list, and add the new property to the
+ * property list
+ */
+int prom_update_property(struct device_node *np,
+ struct property *newprop,
+ struct property *oldprop)
+{
+ struct property **next;
+ unsigned long flags;
+ int found = 0;
+
+ write_lock_irqsave(&devtree_lock, flags);
+ next = &np->properties;
+ while (*next) {
+ if (*next == oldprop) {
+ /* found the node */
+ newprop->next = oldprop->next;
+ *next = newprop;
+ oldprop->next = np->deadprops;
+ np->deadprops = oldprop;
+ found = 1;
+ break;
+ }
+ next = &(*next)->next;
+ }
+ write_unlock_irqrestore(&devtree_lock, flags);
+
+ if (!found)
+ return -ENODEV;
+
+#ifdef CONFIG_PROC_DEVICETREE
+ /* try to add to proc as well if it was initialized */
+ if (np->pde)
+ proc_device_tree_update_prop(np->pde, newprop, oldprop);
+#endif /* CONFIG_PROC_DEVICETREE */
+
+ return 0;
+}
+
+#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
+static struct debugfs_blob_wrapper flat_dt_blob;
+
+static int __init export_flat_device_tree(void)
+{
+ struct dentry *d;
+
+ flat_dt_blob.data = initial_boot_params;
+ flat_dt_blob.size = initial_boot_params->totalsize;
+
+ d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
+ of_debugfs_root, &flat_dt_blob);
+ if (!d)
+ return 1;
+
+ return 0;
+}
+device_initcall(export_flat_device_tree);
+#endif
--- /dev/null
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/pci_regs.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/etherdevice.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#define PRu64 "%llx"
+
+/* Max address size we deal with */
+#define OF_MAX_ADDR_CELLS 4
+#define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \
+ (ns) > 0)
+
+static struct of_bus *of_match_bus(struct device_node *np);
+static int __of_address_to_resource(struct device_node *dev,
+ const u32 *addrp, u64 size, unsigned int flags,
+ struct resource *r);
+
+/* Debug utility */
+#ifdef DEBUG
+static void of_dump_addr(const char *s, const u32 *addr, int na)
+{
+ printk(KERN_INFO "%s", s);
+ while (na--)
+ printk(KERN_INFO " %08x", *(addr++));
+ printk(KERN_INFO "\n");
+}
+#else
+static void of_dump_addr(const char *s, const u32 *addr, int na) { }
+#endif
+
+/* Callbacks for bus specific translators */
+struct of_bus {
+ const char *name;
+ const char *addresses;
+ int (*match)(struct device_node *parent);
+ void (*count_cells)(struct device_node *child,
+ int *addrc, int *sizec);
+ u64 (*map)(u32 *addr, const u32 *range,
+ int na, int ns, int pna);
+ int (*translate)(u32 *addr, u64 offset, int na);
+ unsigned int (*get_flags)(const u32 *addr);
+};
+
+/*
+ * Default translator (generic bus)
+ */
+
+static void of_bus_default_count_cells(struct device_node *dev,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = of_n_addr_cells(dev);
+ if (sizec)
+ *sizec = of_n_size_cells(dev);
+}
+
+static u64 of_bus_default_map(u32 *addr, const u32 *range,
+ int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ cp = of_read_number(range, na);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr, na);
+
+ pr_debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
+ cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_default_translate(u32 *addr, u64 offset, int na)
+{
+ u64 a = of_read_number(addr, na);
+ memset(addr, 0, na * 4);
+ a += offset;
+ if (na > 1)
+ addr[na - 2] = a >> 32;
+ addr[na - 1] = a & 0xffffffffu;
+
+ return 0;
+}
+
+static unsigned int of_bus_default_get_flags(const u32 *addr)
+{
+ return IORESOURCE_MEM;
+}
+
+#ifdef CONFIG_PCI
+/*
+ * PCI bus specific translator
+ */
+
+static int of_bus_pci_match(struct device_node *np)
+{
+ /* "vci" is for the /chaos bridge on 1st-gen PCI powermacs */
+ return !strcmp(np->type, "pci") || !strcmp(np->type, "vci");
+}
+
+static void of_bus_pci_count_cells(struct device_node *np,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 3;
+ if (sizec)
+ *sizec = 2;
+}
+
+static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ /* Check address type match */
+ if ((addr[0] ^ range[0]) & 0x03000000)
+ return OF_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = of_read_number(range + 1, na - 1);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + 1, na - 1);
+
+ pr_debug("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
+{
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = addr[0];
+
+ switch ((w >> 24) & 0x03) {
+ case 0x01:
+ flags |= IORESOURCE_IO;
+ break;
+ case 0x02: /* 32 bits */
+ case 0x03: /* 64 bits */
+ flags |= IORESOURCE_MEM;
+ break;
+ }
+ if (w & 0x40000000)
+ flags |= IORESOURCE_PREFETCH;
+ return flags;
+}
+
+const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
+ unsigned int *flags)
+{
+ const u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ if (strcmp(bus->name, "pci")) {
+ of_node_put(parent);
+ return NULL;
+ }
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = of_get_property(dev, bus->addresses, &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) {
+ if (size)
+ *size = of_read_number(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_pci_address);
+
+int of_pci_address_to_resource(struct device_node *dev, int bar,
+ struct resource *r)
+{
+ const u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_pci_address(dev, bar, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
+{
+ return (((pin - 1) + slot) % 4) + 1;
+}
+
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ u32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard OF
+ * parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn)
+ return of_irq_map_one(dn, 0, out_irq);
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+ struct pci_controller *host;
+ host = pci_bus_to_host(pdev->bus);
+ ppnode = host ? host->arch_data : NULL;
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't
+ * include the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+ pdev = ppdev;
+ }
+
+ laddr[0] = (pdev->bus->number << 16)
+ | (pdev->devfn << 8);
+ laddr[1] = laddr[2] = 0;
+ return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
+#endif /* CONFIG_PCI */
+
+/*
+ * ISA bus specific translator
+ */
+
+static int of_bus_isa_match(struct device_node *np)
+{
+ return !strcmp(np->name, "isa");
+}
+
+static void of_bus_isa_count_cells(struct device_node *child,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 2;
+ if (sizec)
+ *sizec = 1;
+}
+
+static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ /* Check address type match */
+ if ((addr[0] ^ range[0]) & 0x00000001)
+ return OF_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = of_read_number(range + 1, na - 1);
+ s = of_read_number(range + na + pna, ns);
+ da = of_read_number(addr + 1, na - 1);
+
+ pr_debug("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da);
+
+ if (da < cp || da >= (cp + s))
+ return OF_BAD_ADDR;
+ return da - cp;
+}
+
+static int of_bus_isa_translate(u32 *addr, u64 offset, int na)
+{
+ return of_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+static unsigned int of_bus_isa_get_flags(const u32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = addr[0];
+
+ if (w & 1)
+ flags |= IORESOURCE_IO;
+ else
+ flags |= IORESOURCE_MEM;
+ return flags;
+}
+
+/*
+ * Array of bus specific translators
+ */
+
+static struct of_bus of_busses[] = {
+#ifdef CONFIG_PCI
+ /* PCI */
+ {
+ .name = "pci",
+ .addresses = "assigned-addresses",
+ .match = of_bus_pci_match,
+ .count_cells = of_bus_pci_count_cells,
+ .map = of_bus_pci_map,
+ .translate = of_bus_pci_translate,
+ .get_flags = of_bus_pci_get_flags,
+ },
+#endif /* CONFIG_PCI */
+ /* ISA */
+ {
+ .name = "isa",
+ .addresses = "reg",
+ .match = of_bus_isa_match,
+ .count_cells = of_bus_isa_count_cells,
+ .map = of_bus_isa_map,
+ .translate = of_bus_isa_translate,
+ .get_flags = of_bus_isa_get_flags,
+ },
+ /* Default */
+ {
+ .name = "default",
+ .addresses = "reg",
+ .match = NULL,
+ .count_cells = of_bus_default_count_cells,
+ .map = of_bus_default_map,
+ .translate = of_bus_default_translate,
+ .get_flags = of_bus_default_get_flags,
+ },
+};
+
+static struct of_bus *of_match_bus(struct device_node *np)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(of_busses); i++)
+ if (!of_busses[i].match || of_busses[i].match(np))
+ return &of_busses[i];
+ BUG();
+ return NULL;
+}
+
+static int of_translate_one(struct device_node *parent, struct of_bus *bus,
+ struct of_bus *pbus, u32 *addr,
+ int na, int ns, int pna)
+{
+ const u32 *ranges;
+ unsigned int rlen;
+ int rone;
+ u64 offset = OF_BAD_ADDR;
+
+ /* Normally, an absence of a "ranges" property means we are
+ * crossing a non-translatable boundary, and thus the addresses
+ * below the current not cannot be converted to CPU physical ones.
+ * Unfortunately, while this is very clear in the spec, it's not
+ * what Apple understood, and they do have things like /uni-n or
+ * /ht nodes with no "ranges" property and a lot of perfectly
+ * useable mapped devices below them. Thus we treat the absence of
+ * "ranges" as equivalent to an empty "ranges" property which means
+ * a 1:1 translation at that level. It's up to the caller not to try
+ * to translate addresses that aren't supposed to be translated in
+ * the first place. --BenH.
+ */
+ ranges = of_get_property(parent, "ranges", (int *) &rlen);
+ if (ranges == NULL || rlen == 0) {
+ offset = of_read_number(addr, na);
+ memset(addr, 0, pna * 4);
+ pr_debug("OF: no ranges, 1:1 translation\n");
+ goto finish;
+ }
+
+ pr_debug("OF: walking ranges...\n");
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+ for (; rlen >= rone; rlen -= rone, ranges += rone) {
+ offset = bus->map(addr, ranges, na, ns, pna);
+ if (offset != OF_BAD_ADDR)
+ break;
+ }
+ if (offset == OF_BAD_ADDR) {
+ pr_debug("OF: not found !\n");
+ return 1;
+ }
+ memcpy(addr, ranges + na, 4 * pna);
+
+ finish:
+ of_dump_addr("OF: parent translation for:", addr, pna);
+ pr_debug("OF: with offset: "PRu64"\n", offset);
+
+ /* Translate it into parent bus space */
+ return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+u64 of_translate_address(struct device_node *dev, const u32 *in_addr)
+{
+ struct device_node *parent = NULL;
+ struct of_bus *bus, *pbus;
+ u32 addr[OF_MAX_ADDR_CELLS];
+ int na, ns, pna, pns;
+ u64 result = OF_BAD_ADDR;
+
+ pr_debug("OF: ** translation for device %s **\n", dev->full_name);
+
+ /* Increase refcount at current level */
+ of_node_get(dev);
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ goto bail;
+ bus = of_match_bus(parent);
+
+ /* Cound address cells & copy address locally */
+ bus->count_cells(dev, &na, &ns);
+ if (!OF_CHECK_COUNTS(na, ns)) {
+ printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+ dev->full_name);
+ goto bail;
+ }
+ memcpy(addr, in_addr, na * 4);
+
+ pr_debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
+ bus->name, na, ns, parent->full_name);
+ of_dump_addr("OF: translating address:", addr, na);
+
+ /* Translate */
+ for (;;) {
+ /* Switch to parent bus */
+ of_node_put(dev);
+ dev = parent;
+ parent = of_get_parent(dev);
+
+ /* If root, we have finished */
+ if (parent == NULL) {
+ pr_debug("OF: reached root node\n");
+ result = of_read_number(addr, na);
+ break;
+ }
+
+ /* Get new parent bus and counts */
+ pbus = of_match_bus(parent);
+ pbus->count_cells(dev, &pna, &pns);
+ if (!OF_CHECK_COUNTS(pna, pns)) {
+ printk(KERN_ERR "prom_parse: Bad cell count for %s\n",
+ dev->full_name);
+ break;
+ }
+
+ pr_debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pbus->name, pna, pns, parent->full_name);
+
+ /* Apply bus translation */
+ if (of_translate_one(dev, bus, pbus, addr, na, ns, pna))
+ break;
+
+ /* Complete the move up one level */
+ na = pna;
+ ns = pns;
+ bus = pbus;
+
+ of_dump_addr("OF: one level translation:", addr, na);
+ }
+ bail:
+ of_node_put(parent);
+ of_node_put(dev);
+
+ return result;
+}
+EXPORT_SYMBOL(of_translate_address);
+
+const u32 *of_get_address(struct device_node *dev, int index, u64 *size,
+ unsigned int *flags)
+{
+ const u32 *prop;
+ unsigned int psize;
+ struct device_node *parent;
+ struct of_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = of_get_parent(dev);
+ if (parent == NULL)
+ return NULL;
+ bus = of_match_bus(parent);
+ bus->count_cells(dev, &na, &ns);
+ of_node_put(parent);
+ if (!OF_CHECK_COUNTS(na, ns))
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = of_get_property(dev, bus->addresses, (int *) &psize);
+ if (prop == NULL)
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++)
+ if (i == index) {
+ if (size)
+ *size = of_read_number(prop + na, ns);
+ if (flags)
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_address);
+
+static int __of_address_to_resource(struct device_node *dev, const u32 *addrp,
+ u64 size, unsigned int flags,
+ struct resource *r)
+{
+ u64 taddr;
+
+ if ((flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0)
+ return -EINVAL;
+ taddr = of_translate_address(dev, addrp);
+ if (taddr == OF_BAD_ADDR)
+ return -EINVAL;
+ memset(r, 0, sizeof(struct resource));
+ if (flags & IORESOURCE_IO) {
+ unsigned long port;
+ port = -1; /* pci_address_to_pio(taddr); */
+ if (port == (unsigned long)-1)
+ return -EINVAL;
+ r->start = port;
+ r->end = port + size - 1;
+ } else {
+ r->start = taddr;
+ r->end = taddr + size - 1;
+ }
+ r->flags = flags;
+ r->name = dev->name;
+ return 0;
+}
+
+int of_address_to_resource(struct device_node *dev, int index,
+ struct resource *r)
+{
+ const u32 *addrp;
+ u64 size;
+ unsigned int flags;
+
+ addrp = of_get_address(dev, index, &size, &flags);
+ if (addrp == NULL)
+ return -EINVAL;
+ return __of_address_to_resource(dev, addrp, size, flags, r);
+}
+EXPORT_SYMBOL_GPL(of_address_to_resource);
+
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+ unsigned long *busno, unsigned long *phys, unsigned long *size)
+{
+ const u32 *dma_window;
+ u32 cells;
+ const unsigned char *prop;
+
+ dma_window = dma_window_prop;
+
+ /* busno is always one cell */
+ *busno = *(dma_window++);
+
+ prop = of_get_property(dn, "ibm,#dma-address-cells", NULL);
+ if (!prop)
+ prop = of_get_property(dn, "#address-cells", NULL);
+
+ cells = prop ? *(u32 *)prop : of_n_addr_cells(dn);
+ *phys = of_read_number(dma_window, cells);
+
+ dma_window += cells;
+
+ prop = of_get_property(dn, "ibm,#dma-size-cells", NULL);
+ cells = prop ? *(u32 *)prop : of_n_size_cells(dn);
+ *size = of_read_number(dma_window, cells);
+}
+
+/*
+ * Interrupt remapper
+ */
+
+static unsigned int of_irq_workarounds;
+static struct device_node *of_irq_dflt_pic;
+
+static struct device_node *of_irq_find_parent(struct device_node *child)
+{
+ struct device_node *p;
+ const phandle *parp;
+
+ if (!of_node_get(child))
+ return NULL;
+
+ do {
+ parp = of_get_property(child, "interrupt-parent", NULL);
+ if (parp == NULL)
+ p = of_get_parent(child);
+ else {
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ p = of_node_get(of_irq_dflt_pic);
+ else
+ p = of_find_node_by_phandle(*parp);
+ }
+ of_node_put(child);
+ child = p;
+ } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL);
+
+ return p;
+}
+
+/* This doesn't need to be called if you don't have any special workaround
+ * flags to pass
+ */
+void of_irq_map_init(unsigned int flags)
+{
+ of_irq_workarounds = flags;
+
+ /* OldWorld, don't bother looking at other things */
+ if (flags & OF_IMAP_OLDWORLD_MAC)
+ return;
+
+ /* If we don't have phandles, let's try to locate a default interrupt
+ * controller (happens when booting with BootX). We do a first match
+ * here, hopefully, that only ever happens on machines with one
+ * controller.
+ */
+ if (flags & OF_IMAP_NO_PHANDLE) {
+ struct device_node *np;
+
+ for (np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
+ if (of_get_property(np, "interrupt-controller", NULL)
+ == NULL)
+ continue;
+ /* Skip /chosen/interrupt-controller */
+ if (strcmp(np->name, "chosen") == 0)
+ continue;
+ /* It seems like at least one person on this planet
+ * wants to use BootX on a machine with an AppleKiwi
+ * controller which happens to pretend to be an
+ * interrupt controller too.
+ */
+ if (strcmp(np->name, "AppleKiwi") == 0)
+ continue;
+ /* I think we found one ! */
+ of_irq_dflt_pic = np;
+ break;
+ }
+ }
+
+}
+
+int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize,
+ const u32 *addr, struct of_irq *out_irq)
+{
+ struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+ const u32 *tmp, *imap, *imask;
+ u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+ int imaplen, match, i;
+
+ pr_debug("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],"
+ "ointsize=%d\n",
+ parent->full_name, intspec[0], intspec[1], ointsize);
+
+ ipar = of_node_get(parent);
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = of_get_property(ipar, "#interrupt-cells", NULL);
+ if (tmp != NULL) {
+ intsize = *tmp;
+ break;
+ }
+ tnode = ipar;
+ ipar = of_irq_find_parent(ipar);
+ of_node_put(tnode);
+ } while (ipar);
+ if (ipar == NULL) {
+ pr_debug(" -> no parent found !\n");
+ goto fail;
+ }
+
+ pr_debug("of_irq_map_raw: ipar=%s, size=%d\n",
+ ipar->full_name, intsize);
+
+ if (ointsize != intsize)
+ return -EINVAL;
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = of_node_get(ipar);
+ do {
+ tmp = of_get_property(old, "#address-cells", NULL);
+ tnode = of_get_parent(old);
+ of_node_put(old);
+ old = tnode;
+ } while (old && tmp == NULL);
+ of_node_put(old);
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : *tmp;
+
+ pr_debug(" -> addrsize=%d\n", addrsize);
+
+ /* Now start the actual "proper" walk of the interrupt tree */
+ while (ipar != NULL) {
+ /* Now check if cursor is an interrupt-controller and if it is
+ * then we are done
+ */
+ if (of_get_property(ipar, "interrupt-controller", NULL) !=
+ NULL) {
+ pr_debug(" -> got it !\n");
+ memcpy(out_irq->specifier, intspec,
+ intsize * sizeof(u32));
+ out_irq->size = intsize;
+ out_irq->controller = ipar;
+ of_node_put(old);
+ return 0;
+ }
+
+ /* Now look for an interrupt-map */
+ imap = of_get_property(ipar, "interrupt-map", &imaplen);
+ /* No interrupt map, check for an interrupt parent */
+ if (imap == NULL) {
+ pr_debug(" -> no map, getting parent\n");
+ newpar = of_irq_find_parent(ipar);
+ goto skiplevel;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Look for a mask */
+ imask = of_get_property(ipar, "interrupt-map-mask", NULL);
+
+ /* If we were passed no "reg" property and we attempt to parse
+ * an interrupt-map, then #address-cells must be 0.
+ * Fail if it's not.
+ */
+ if (addr == NULL && addrsize != 0) {
+ pr_debug(" -> no reg passed in when needed !\n");
+ goto fail;
+ }
+
+ /* Parse interrupt-map */
+ match = 0;
+ while (imaplen > (addrsize + intsize + 1) && !match) {
+ /* Compare specifiers */
+ match = 1;
+ for (i = 0; i < addrsize && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match = ((addr[i] ^ imap[i]) & mask) == 0;
+ }
+ for (; i < (addrsize + intsize) && match; ++i) {
+ u32 mask = imask ? imask[i] : 0xffffffffu;
+ match =
+ ((intspec[i-addrsize] ^ imap[i])
+ & mask) == 0;
+ }
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ pr_debug(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+ /* Get the interrupt parent */
+ if (of_irq_workarounds & OF_IMAP_NO_PHANDLE)
+ newpar = of_node_get(of_irq_dflt_pic);
+ else
+ newpar =
+ of_find_node_by_phandle((phandle)*imap);
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if (newpar == NULL) {
+ pr_debug(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = of_get_property(newpar, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ pr_debug(" -> parent lacks "
+ "#interrupt-cells!\n");
+ goto fail;
+ }
+ newintsize = *tmp;
+ tmp = of_get_property(newpar, "#address-cells", NULL);
+ newaddrsize = (tmp == NULL) ? 0 : *tmp;
+
+ pr_debug(" -> newintsize=%d, newaddrsize=%d\n",
+ newintsize, newaddrsize);
+
+ /* Check for malformed properties */
+ if (imaplen < (newaddrsize + newintsize))
+ goto fail;
+
+ imap += newaddrsize + newintsize;
+ imaplen -= newaddrsize + newintsize;
+
+ pr_debug(" -> imaplen=%d\n", imaplen);
+ }
+ if (!match)
+ goto fail;
+
+ of_node_put(old);
+ old = of_node_get(newpar);
+ addrsize = newaddrsize;
+ intsize = newintsize;
+ intspec = imap - intsize;
+ addr = intspec - addrsize;
+
+skiplevel:
+ /* Iterate again with new parent */
+ pr_debug(" -> new parent: %s\n",
+ newpar ? newpar->full_name : "<>");
+ of_node_put(ipar);
+ ipar = newpar;
+ newpar = NULL;
+ }
+fail:
+ of_node_put(ipar);
+ of_node_put(old);
+ of_node_put(newpar);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_raw);
+
+int of_irq_map_one(struct device_node *device,
+ int index, struct of_irq *out_irq)
+{
+ struct device_node *p;
+ const u32 *intspec, *tmp, *addr;
+ u32 intsize, intlen;
+ int res;
+
+ pr_debug("of_irq_map_one: dev=%s, index=%d\n",
+ device->full_name, index);
+
+ /* Get the interrupts property */
+ intspec = of_get_property(device, "interrupts", (int *) &intlen);
+ if (intspec == NULL)
+ return -EINVAL;
+ intlen /= sizeof(u32);
+
+ pr_debug(" intspec=%d intlen=%d\n", *intspec, intlen);
+
+ /* Get the reg property (if any) */
+ addr = of_get_property(device, "reg", NULL);
+
+ /* Look for the interrupt parent. */
+ p = of_irq_find_parent(device);
+ if (p == NULL)
+ return -EINVAL;
+
+ /* Get size of interrupt specifier */
+ tmp = of_get_property(p, "#interrupt-cells", NULL);
+ if (tmp == NULL) {
+ of_node_put(p);
+ return -EINVAL;
+ }
+ intsize = *tmp;
+
+ pr_debug(" intsize=%d intlen=%d\n", intsize, intlen);
+
+ /* Check index */
+ if ((index + 1) * intsize > intlen)
+ return -EINVAL;
+
+ /* Get new specifier and map it */
+ res = of_irq_map_raw(p, intspec + index * intsize, intsize,
+ addr, out_irq);
+ of_node_put(p);
+ return res;
+}
+EXPORT_SYMBOL_GPL(of_irq_map_one);
+
+/**
+ * Search the device tree for the best MAC address to use. 'mac-address' is
+ * checked first, because that is supposed to contain to "most recent" MAC
+ * address. If that isn't set, then 'local-mac-address' is checked next,
+ * because that is the default address. If that isn't set, then the obsolete
+ * 'address' is checked, just in case we're using an old device tree.
+ *
+ * Note that the 'address' property is supposed to contain a virtual address of
+ * the register set, but some DTS files have redefined that property to be the
+ * MAC address.
+ *
+ * All-zero MAC addresses are rejected, because those could be properties that
+ * exist in the device tree, but were not set by U-Boot. For example, the
+ * DTS could define 'mac-address' and 'local-mac-address', with zero MAC
+ * addresses. Some older U-Boots only initialized 'local-mac-address'. In
+ * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+ * but is all zeros.
+*/
+const void *of_get_mac_address(struct device_node *np)
+{
+ struct property *pp;
+
+ pp = of_find_property(np, "mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "local-mac-address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ pp = of_find_property(np, "address", NULL);
+ if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value))
+ return pp->value;
+
+ return NULL;
+}
+EXPORT_SYMBOL(of_get_mac_address);
+
+int of_irq_to_resource(struct device_node *dev, int index, struct resource *r)
+{
+ struct of_irq out_irq;
+ int irq;
+ int res;
+
+ res = of_irq_map_one(dev, index, &out_irq);
+
+ /* Get irq for the device */
+ if (res) {
+ pr_debug("IRQ not found... code = %d", res);
+ return NO_IRQ;
+ }
+ /* Assuming single interrupt controller... */
+ irq = out_irq.specifier[0];
+
+ pr_debug("IRQ found = %d", irq);
+
+ /* Only dereference the resource if both the
+ * resource and the irq are valid. */
+ if (r && irq != NO_IRQ) {
+ r->start = r->end = irq;
+ r->flags = IORESOURCE_IRQ;
+ }
+
+ return irq;
+}
+EXPORT_SYMBOL_GPL(of_irq_to_resource);
+
+void __iomem *of_iomap(struct device_node *np, int index)
+{
+ struct resource res;
+
+ if (of_address_to_resource(np, index, &res))
+ return NULL;
+
+ return ioremap(res.start, 1 + res.end - res.start);
+}
+EXPORT_SYMBOL(of_iomap);
--- /dev/null
+/*
+ * `ptrace' system call
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2004-2007 John Williams <john.williams@petalogix.com>
+ *
+ * derived from arch/v850/kernel/ptrace.c
+ *
+ * Copyright (C) 2002,03 NEC Electronics Corporation
+ * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
+ *
+ * Derived from arch/mips/kernel/ptrace.c:
+ *
+ * Copyright (C) 1992 Ross Biro
+ * Copyright (C) Linus Torvalds
+ * Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller
+ * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999 MIPS Technologies, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/smp_lock.h>
+#include <linux/ptrace.h>
+#include <linux/signal.h>
+
+#include <linux/errno.h>
+#include <asm/processor.h>
+#include <linux/uaccess.h>
+#include <asm/asm-offsets.h>
+
+/* Returns the address where the register at REG_OFFS in P is stashed away. */
+static microblaze_reg_t *reg_save_addr(unsigned reg_offs,
+ struct task_struct *t)
+{
+ struct pt_regs *regs;
+
+ /*
+ * Three basic cases:
+ *
+ * (1) A register normally saved before calling the scheduler, is
+ * available in the kernel entry pt_regs structure at the top
+ * of the kernel stack. The kernel trap/irq exit path takes
+ * care to save/restore almost all registers for ptrace'd
+ * processes.
+ *
+ * (2) A call-clobbered register, where the process P entered the
+ * kernel via [syscall] trap, is not stored anywhere; that's
+ * OK, because such registers are not expected to be preserved
+ * when the trap returns anyway (so we don't actually bother to
+ * test for this case).
+ *
+ * (3) A few registers not used at all by the kernel, and so
+ * normally never saved except by context-switches, are in the
+ * context switch state.
+ */
+
+ /* Register saved during kernel entry (or not available). */
+ regs = task_pt_regs(t);
+
+ return (microblaze_reg_t *)((char *)regs + reg_offs);
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ int rval;
+ unsigned long val = 0;
+ unsigned long copied;
+
+ switch (request) {
+ case PTRACE_PEEKTEXT: /* read word at location addr. */
+ case PTRACE_PEEKDATA:
+ pr_debug("PEEKTEXT/PEEKDATA at %08lX\n", addr);
+ copied = access_process_vm(child, addr, &val, sizeof(val), 0);
+ rval = -EIO;
+ if (copied != sizeof(val))
+ break;
+ rval = put_user(val, (unsigned long *)data);
+ break;
+
+ case PTRACE_POKETEXT: /* write the word at location addr. */
+ case PTRACE_POKEDATA:
+ pr_debug("POKETEXT/POKEDATA to %08lX\n", addr);
+ rval = 0;
+ if (access_process_vm(child, addr, &data, sizeof(data), 1)
+ == sizeof(data))
+ break;
+ rval = -EIO;
+ break;
+
+ /* Read/write the word at location ADDR in the registers. */
+ case PTRACE_PEEKUSR:
+ case PTRACE_POKEUSR:
+ pr_debug("PEEKUSR/POKEUSR : 0x%08lx\n", addr);
+ rval = 0;
+ if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
+ /*
+ * Special requests that don't actually correspond
+ * to offsets in struct pt_regs.
+ */
+ if (addr == PT_TEXT_ADDR) {
+ val = child->mm->start_code;
+ } else if (addr == PT_DATA_ADDR) {
+ val = child->mm->start_data;
+ } else if (addr == PT_TEXT_LEN) {
+ val = child->mm->end_code
+ - child->mm->start_code;
+ } else {
+ rval = -EIO;
+ }
+ } else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
+ microblaze_reg_t *reg_addr = reg_save_addr(addr, child);
+ if (request == PTRACE_PEEKUSR)
+ val = *reg_addr;
+ else
+ *reg_addr = data;
+ } else
+ rval = -EIO;
+
+ if (rval == 0 && request == PTRACE_PEEKUSR)
+ rval = put_user(val, (unsigned long *)data);
+ break;
+ /* Continue and stop at next (return from) syscall */
+ case PTRACE_SYSCALL:
+ pr_debug("PTRACE_SYSCALL\n");
+ case PTRACE_SINGLESTEP:
+ pr_debug("PTRACE_SINGLESTEP\n");
+ /* Restart after a signal. */
+ case PTRACE_CONT:
+ pr_debug("PTRACE_CONT\n");
+ rval = -EIO;
+ if (!valid_signal(data))
+ break;
+
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ else
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+
+ child->exit_code = data;
+ pr_debug("wakeup_process\n");
+ wake_up_process(child);
+ rval = 0;
+ break;
+
+ /*
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
+ * exit.
+ */
+ case PTRACE_KILL:
+ pr_debug("PTRACE_KILL\n");
+ rval = 0;
+ if (child->exit_state == EXIT_ZOMBIE) /* already dead */
+ break;
+ child->exit_code = SIGKILL;
+ wake_up_process(child);
+ break;
+
+ case PTRACE_DETACH: /* detach a process that was attached. */
+ pr_debug("PTRACE_DETACH\n");
+ rval = ptrace_detach(child, data);
+ break;
+ default:
+ /* rval = ptrace_request(child, request, addr, data); noMMU */
+ rval = -EIO;
+ }
+ return rval;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+ /* nothing to do */
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2009 PetaLogix
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <asm/selfmod.h>
+
+#undef DEBUG
+
+#if __GNUC__ > 3
+#error GCC 4 unsupported SELFMOD. Please disable SELFMOD from menuconfig.
+#endif
+
+#define OPCODE_IMM 0xB0000000
+#define OPCODE_LWI 0xE8000000
+#define OPCODE_LWI_MASK 0xEC000000
+#define OPCODE_RTSD 0xB60F0008 /* return from func: rtsd r15, 8 */
+#define OPCODE_ADDIK 0x30000000
+#define OPCODE_ADDIK_MASK 0xFC000000
+
+#define IMM_BASE (OPCODE_IMM | (BARRIER_BASE_ADDR >> 16))
+#define LWI_BASE (OPCODE_LWI | (BARRIER_BASE_ADDR & 0x0000ff00))
+#define LWI_BASE_MASK (OPCODE_LWI_MASK | (BARRIER_BASE_ADDR & 0x0000ff00))
+#define ADDIK_BASE (OPCODE_ADDIK | (BARRIER_BASE_ADDR & 0x0000ff00))
+#define ADDIK_BASE_MASK (OPCODE_ADDIK_MASK | (BARRIER_BASE_ADDR & 0x0000ff00))
+
+#define MODIFY_INSTR { \
+ pr_debug("%s: curr instr, (%d):0x%x, next(%d):0x%x\n", \
+ __func__, i, addr[i], i + 1, addr[i + 1]); \
+ addr[i] = OPCODE_IMM + (base >> 16); \
+ /* keep instruction opcode and add only last 16bits */ \
+ addr[i + 1] = (addr[i + 1] & 0xffff00ff) + (base & 0xffff); \
+ __invalidate_icache(addr[i]); \
+ __invalidate_icache(addr[i + 1]); \
+ pr_debug("%s: hack instr, (%d):0x%x, next(%d):0x%x\n", \
+ __func__, i, addr[i], i + 1, addr[i + 1]); }
+
+/* NOTE
+ * self-modified part of code for improvement of interrupt controller
+ * save instruction in interrupt rutine
+ */
+void selfmod_function(const int *arr_fce, const unsigned int base)
+{
+ unsigned int flags, i, j, *addr = NULL;
+
+ local_irq_save(flags);
+ __disable_icache();
+
+ /* zero terminated array */
+ for (j = 0; arr_fce[j] != 0; j++) {
+ /* get start address of function */
+ addr = (unsigned int *) arr_fce[j];
+ pr_debug("%s: func(%d) at 0x%x\n",
+ __func__, j, (unsigned int) addr);
+ for (i = 0; ; i++) {
+ pr_debug("%s: instruction code at %d: 0x%x\n",
+ __func__, i, addr[i]);
+ if (addr[i] == IMM_BASE) {
+ /* detecting of lwi (0xE8) or swi (0xF8) instr
+ * I can detect both opcode with one mask */
+ if ((addr[i + 1] & LWI_BASE_MASK) == LWI_BASE) {
+ MODIFY_INSTR;
+ } else /* detection addik for ack */
+ if ((addr[i + 1] & ADDIK_BASE_MASK) ==
+ ADDIK_BASE) {
+ MODIFY_INSTR;
+ }
+ } else if (addr[i] == OPCODE_RTSD) {
+ /* return from function means end of function */
+ pr_debug("%s: end of array %d\n", __func__, i);
+ break;
+ }
+ }
+ }
+ local_irq_restore(flags);
+} /* end of self-modified code */
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/cpu.h>
+#include <linux/initrd.h>
+#include <linux/console.h>
+#include <linux/debugfs.h>
+
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/page.h>
+#include <linux/io.h>
+#include <linux/bug.h>
+#include <linux/param.h>
+#include <linux/cache.h>
+#include <asm/cacheflush.h>
+#include <asm/entry.h>
+#include <asm/cpuinfo.h>
+
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/pgtable.h>
+
+DEFINE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
+DEFINE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
+DEFINE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
+DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
+DEFINE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
+
+unsigned int boot_cpuid;
+char cmd_line[COMMAND_LINE_SIZE];
+
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_CMDLINE_FORCE
+ strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif
+ *cmdline_p = cmd_line;
+
+ console_verbose();
+
+ unflatten_device_tree();
+
+ /* NOTE I think that this function is not necessary to call */
+ /* irq_early_init(); */
+ setup_cpuinfo();
+
+ __invalidate_icache_all();
+ __enable_icache();
+
+ __invalidate_dcache_all();
+ __enable_dcache();
+
+ panic_timeout = 120;
+
+ setup_memory();
+
+#if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER)
+ printk(KERN_NOTICE "Self modified code enable\n");
+#endif
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_XILINX_CONSOLE)
+ conswitchp = &xil_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+#endif
+}
+
+#ifdef CONFIG_MTD_UCLINUX
+/* Handle both romfs and cramfs types, without generating unnecessary
+ code (ie no point checking for CRAMFS if it's not even enabled) */
+inline unsigned get_romfs_len(unsigned *addr)
+{
+#ifdef CONFIG_ROMFS_FS
+ if (memcmp(&addr[0], "-rom1fs-", 8) == 0) /* romfs */
+ return be32_to_cpu(addr[2]);
+#endif
+
+#ifdef CONFIG_CRAMFS
+ if (addr[0] == le32_to_cpu(0x28cd3d45)) /* cramfs */
+ return le32_to_cpu(addr[1]);
+#endif
+ return 0;
+}
+#endif /* CONFIG_MTD_UCLINUX_EBSS */
+
+void __init machine_early_init(const char *cmdline, unsigned int ram,
+ unsigned int fdt)
+{
+ unsigned long *src, *dst = (unsigned long *)0x0;
+
+/* clearing bss section */
+ memset(__bss_start, 0, __bss_stop-__bss_start);
+ memset(_ssbss, 0, _esbss-_ssbss);
+
+ /*
+ * Copy command line passed from bootloader, or use default
+ * if none provided, or forced
+ */
+#ifndef CONFIG_CMDLINE_BOOL
+ if (cmdline && cmdline[0] != '\0')
+ strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE);
+#endif
+
+/* initialize device tree for usage in early_printk */
+ early_init_devtree((void *)_fdt_start);
+
+#ifdef CONFIG_EARLY_PRINTK
+ setup_early_printk(NULL);
+#endif
+
+ early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
+ printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+
+#ifdef CONFIG_MTD_UCLINUX
+ {
+ int size;
+ unsigned int romfs_base;
+ romfs_base = (ram ? ram : (unsigned int)&__init_end);
+ /* if CONFIG_MTD_UCLINUX_EBSS is defined, assume ROMFS is at the
+ * end of kernel, which is ROMFS_LOCATION defined above. */
+ size = PAGE_ALIGN(get_romfs_len((unsigned *)romfs_base));
+ early_printk("Found romfs @ 0x%08x (0x%08x)\n",
+ romfs_base, size);
+ early_printk("#### klimit %p ####\n", klimit);
+ BUG_ON(size < 0); /* What else can we do? */
+
+ /* Use memmove to handle likely case of memory overlap */
+ early_printk("Moving 0x%08x bytes from 0x%08x to 0x%08x\n",
+ size, romfs_base, (unsigned)&_ebss);
+ memmove(&_ebss, (int *)romfs_base, size);
+
+ /* update klimit */
+ klimit += PAGE_ALIGN(size);
+ early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
+ }
+#endif
+
+ for (src = __ivt_start; src < __ivt_end; src++, dst++)
+ *dst = *src;
+
+ /* Initialize global data */
+ per_cpu(KM, 0) = 0x1; /* We start in kernel mode */
+ per_cpu(CURRENT_SAVE, 0) = (unsigned long)current;
+}
+
+#ifdef CONFIG_DEBUG_FS
+struct dentry *of_debugfs_root;
+
+static int microblaze_debugfs_init(void)
+{
+ of_debugfs_root = debugfs_create_dir("microblaze", NULL);
+
+ return of_debugfs_root == NULL;
+}
+arch_initcall(microblaze_debugfs_init);
+#endif
+
+void machine_restart(char *cmd)
+{
+ printk(KERN_NOTICE "Machine restart...\n");
+ dump_stack();
+ while (1)
+ ;
+}
+
+void machine_shutdown(void)
+{
+ printk(KERN_NOTICE "Machine shutdown...\n");
+ while (1)
+ ;
+}
+
+void machine_halt(void)
+{
+ printk(KERN_NOTICE "Machine halt...\n");
+ while (1)
+ ;
+}
+
+void machine_power_off(void)
+{
+ printk(KERN_NOTICE "Machine power off...\n");
+ while (1)
+ ;
+}
--- /dev/null
+/*
+ * Signal handling
+ *
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2003,2004 John Williams <jwilliams@itee.uq.edu.au>
+ * Copyright (C) 2001 NEC Corporation
+ * Copyright (C) 2001 Miles Bader <miles@gnu.org>
+ * Copyright (C) 1999,2000 Niibe Yutaka & Kaz Kojima
+ * Copyright (C) 1991,1992 Linus Torvalds
+ *
+ * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
+ *
+ * This file was was derived from the sh version, arch/sh/kernel/signal.c
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/percpu.h>
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/ucontext.h>
+#include <linux/uaccess.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <linux/syscalls.h>
+#include <asm/cacheflush.h>
+#include <asm/syscalls.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall);
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+asmlinkage int
+sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
+{
+ sigset_t saveset;
+
+ mask &= _BLOCKABLE;
+ spin_lock_irq(¤t->sighand->siglock);
+ saveset = current->blocked;
+ siginitset(¤t->blocked, mask);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ regs->r3 = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (do_signal(regs, &saveset, 1))
+ return -EINTR;
+ }
+}
+
+asmlinkage int
+sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
+ struct pt_regs *regs)
+{
+ sigset_t saveset, newset;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (sigsetsize != sizeof(sigset_t))
+ return -EINVAL;
+
+ if (copy_from_user(&newset, unewset, sizeof(newset)))
+ return -EFAULT;
+ sigdelsetmask(&newset, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ saveset = current->blocked;
+ current->blocked = newset;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ regs->r3 = -EINTR;
+ while (1) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule();
+ if (do_signal(regs, &saveset, 1))
+ return -EINTR;
+ }
+}
+
+asmlinkage int
+sys_sigaction(int sig, const struct old_sigaction *act,
+ struct old_sigaction *oact)
+{
+ struct k_sigaction new_ka, old_ka;
+ int ret;
+
+ if (act) {
+ old_sigset_t mask;
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
+ __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+ return -EFAULT;
+ __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+ __get_user(mask, &act->sa_mask);
+ siginitset(&new_ka.sa.sa_mask, mask);
+ }
+
+ ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
+ __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+ return -EFAULT;
+ __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+ __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
+ }
+
+ return ret;
+}
+
+asmlinkage int
+sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
+ struct pt_regs *regs)
+{
+ return do_sigaltstack(uss, uoss, regs->r1);
+}
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+struct sigframe {
+ struct sigcontext sc;
+ unsigned long extramask[_NSIG_WORDS-1];
+ unsigned long tramp[2]; /* signal trampoline */
+};
+
+struct rt_sigframe {
+ struct siginfo info;
+ struct ucontext uc;
+ unsigned long tramp[2]; /* signal trampoline */
+};
+
+static int
+restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
+{
+ unsigned int err = 0;
+
+#define COPY(x) {err |= __get_user(regs->x, &sc->regs.x); }
+ COPY(r0);
+ COPY(r1);
+ COPY(r2); COPY(r3); COPY(r4); COPY(r5);
+ COPY(r6); COPY(r7); COPY(r8); COPY(r9);
+ COPY(r10); COPY(r11); COPY(r12); COPY(r13);
+ COPY(r14); COPY(r15); COPY(r16); COPY(r17);
+ COPY(r18); COPY(r19); COPY(r20); COPY(r21);
+ COPY(r22); COPY(r23); COPY(r24); COPY(r25);
+ COPY(r26); COPY(r27); COPY(r28); COPY(r29);
+ COPY(r30); COPY(r31);
+ COPY(pc); COPY(ear); COPY(esr); COPY(fsr);
+#undef COPY
+
+ *rval_p = regs->r3;
+
+ return err;
+}
+
+asmlinkage int sys_sigreturn(struct pt_regs *regs)
+{
+ struct sigframe *frame =
+ (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
+ sigset_t set;
+ int rval;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__get_user(set.sig[0], &frame->sc.oldmask)
+ || (_NSIG_WORDS > 1
+ && __copy_from_user(&set.sig[1], &frame->extramask,
+ sizeof(frame->extramask))))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->sc, &rval))
+ goto badframe;
+ return rval;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
+{
+ struct rt_sigframe *frame =
+ (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
+ sigset_t set;
+ stack_t st;
+ int rval;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(¤t->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
+ goto badframe;
+
+ if (__copy_from_user((void *)&st, &frame->uc.uc_stack, sizeof(st)))
+ goto badframe;
+ /* It is more difficult to avoid calling this function than to
+ call it and ignore errors. */
+ do_sigaltstack(&st, NULL, regs->r1);
+
+ return rval;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+static int
+setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
+ unsigned long mask)
+{
+ int err = 0;
+
+#define COPY(x) {err |= __put_user(regs->x, &sc->regs.x); }
+ COPY(r0);
+ COPY(r1);
+ COPY(r2); COPY(r3); COPY(r4); COPY(r5);
+ COPY(r6); COPY(r7); COPY(r8); COPY(r9);
+ COPY(r10); COPY(r11); COPY(r12); COPY(r13);
+ COPY(r14); COPY(r15); COPY(r16); COPY(r17);
+ COPY(r18); COPY(r19); COPY(r20); COPY(r21);
+ COPY(r22); COPY(r23); COPY(r24); COPY(r25);
+ COPY(r26); COPY(r27); COPY(r28); COPY(r29);
+ COPY(r30); COPY(r31);
+ COPY(pc); COPY(ear); COPY(esr); COPY(fsr);
+#undef COPY
+
+ err |= __put_user(mask, &sc->oldmask);
+
+ return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void *
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
+{
+ /* Default to using normal stack */
+ unsigned long sp = regs->r1;
+
+ if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && !on_sig_stack(sp))
+ sp = current->sas_ss_sp + current->sas_ss_size;
+
+ return (void *)((sp - frame_size) & -8UL);
+}
+
+static void setup_frame(int sig, struct k_sigaction *ka,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct sigframe *frame;
+ int err = 0;
+ int signal;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ signal = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
+
+ if (_NSIG_WORDS > 1) {
+ err |= __copy_to_user(frame->extramask, &set->sig[1],
+ sizeof(frame->extramask));
+ }
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ /* minus 8 is offset to cater for "rtsd r15,8" offset */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
+ } else {
+ /* Note, these encodings are _big endian_! */
+
+ /* addi r12, r0, __NR_sigreturn */
+ err |= __put_user(0x31800000 | __NR_sigreturn ,
+ frame->tramp + 0);
+ /* brki r14, 0x8 */
+ err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+ /* Return from sighandler will jump to the tramp.
+ Negative 8 offset because return is rtsd r15, 8 */
+ regs->r15 = ((unsigned long)frame->tramp)-8;
+
+ __invalidate_cache_sigtramp((unsigned long)frame->tramp);
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
+ /* Signal handler args: */
+ regs->r5 = signal; /* Arg 0: signum */
+ regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
+
+ /* Offset of 4 to handle microblaze rtid r14, 0 */
+ regs->pc = (unsigned long)ka->sa.sa_handler;
+
+ set_fs(USER_DS);
+
+#ifdef DEBUG_SIG
+ printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
+ current->comm, current->pid, frame, regs->pc);
+#endif
+
+ return;
+
+give_sigsegv:
+ if (sig == SIGSEGV)
+ ka->sa.sa_handler = SIG_DFL;
+ force_sig(SIGSEGV, current);
+}
+
+static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+ int signal;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ signal = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ err |= copy_siginfo_to_user(&frame->info, info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user((void *)current->sas_ss_sp,
+ &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->r1),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext,
+ regs, set->sig[0]);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ /* Set up to return from userspace. If provided, use a stub
+ already in userspace. */
+ /* minus 8 is offset to cater for "rtsd r15,8" */
+ if (ka->sa.sa_flags & SA_RESTORER) {
+ regs->r15 = ((unsigned long)ka->sa.sa_restorer)-8;
+ } else {
+ /* addi r12, r0, __NR_sigreturn */
+ err |= __put_user(0x31800000 | __NR_rt_sigreturn ,
+ frame->tramp + 0);
+ /* brki r14, 0x8 */
+ err |= __put_user(0xb9cc0008, frame->tramp + 1);
+
+ /* Return from sighandler will jump to the tramp.
+ Negative 8 offset because return is rtsd r15, 8 */
+ regs->r15 = ((unsigned long)frame->tramp)-8;
+
+ __invalidate_cache_sigtramp((unsigned long)frame->tramp);
+ }
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up registers for signal handler */
+ regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
+ /* Signal handler args: */
+ regs->r5 = signal; /* arg 0: signum */
+ regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
+ regs->r7 = (unsigned long) &frame->uc; /* arg2: ucontext */
+ /* Offset to handle microblaze rtid r14, 0 */
+ regs->pc = (unsigned long)ka->sa.sa_handler;
+
+ set_fs(USER_DS);
+
+#ifdef DEBUG_SIG
+ printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n",
+ current->comm, current->pid, frame, regs->pc);
+#endif
+
+ return;
+
+give_sigsegv:
+ if (sig == SIGSEGV)
+ ka->sa.sa_handler = SIG_DFL;
+ force_sig(SIGSEGV, current);
+}
+
+/* Handle restarting system calls */
+static inline void
+handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
+{
+ switch (regs->r3) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ if (!has_handler)
+ goto do_restart;
+ regs->r3 = -EINTR;
+ break;
+ case -ERESTARTSYS:
+ if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
+ regs->r3 = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+do_restart:
+ /* offset of 4 bytes to re-execute trap (brki) instruction */
+ regs->pc -= 4;
+ break;
+ }
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static void
+handle_signal(unsigned long sig, struct k_sigaction *ka,
+ siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
+{
+ /* Set up the stack frame */
+ if (ka->sa.sa_flags & SA_SIGINFO)
+ setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+ setup_frame(sig, ka, oldset, regs);
+
+ if (ka->sa.sa_flags & SA_ONESHOT)
+ ka->sa.sa_handler = SIG_DFL;
+
+ if (!(ka->sa.sa_flags & SA_NODEFER)) {
+ spin_lock_irq(¤t->sighand->siglock);
+ sigorsets(¤t->blocked,
+ ¤t->blocked, &ka->sa.sa_mask);
+ sigaddset(¤t->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(¤t->sighand->siglock);
+ }
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_syscall)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+#ifdef DEBUG_SIG
+ printk(KERN_INFO "do signal: %p %p %d\n", regs, oldset, in_syscall);
+ printk(KERN_INFO "do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1,
+ regs->r12, current_thread_info()->flags);
+#endif
+ /*
+ * We want the common case to go fast, which
+ * is why we may in certain cases get here from
+ * kernel mode. Just return without doing anything
+ * if so.
+ */
+ if (kernel_mode(regs))
+ return 1;
+
+ if (!oldset)
+ oldset = ¤t->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (in_syscall)
+ handle_restart(regs, &ka, 1);
+ handle_signal(signr, &ka, &info, oldset, regs);
+ return 1;
+ }
+
+ if (in_syscall)
+ handle_restart(regs, NULL, 0);
+
+ /* Did we come from a system call? */
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2007 John Williams <john.williams@petalogix.com>
+ *
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ * Tetsuya OHKAWA <tetsuya@atmark-techno.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/syscalls.h>
+#include <linux/sem.h>
+#include <linux/msg.h>
+#include <linux/shm.h>
+#include <linux/stat.h>
+#include <linux/mman.h>
+#include <linux/sys.h>
+#include <linux/ipc.h>
+#include <linux/utsname.h>
+#include <linux/file.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/semaphore.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+/*
+ * sys_ipc() is the de-multiplexer for the SysV IPC calls..
+ *
+ * This is really horribly ugly. This will be remove with new toolchain.
+ */
+asmlinkage int
+sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
+{
+ int version, ret;
+
+ version = call >> 16; /* hack for backward compatibility */
+ call &= 0xffff;
+
+ ret = -EINVAL;
+ switch (call) {
+ case SEMOP:
+ ret = sys_semop(first, (struct sembuf *)ptr, second);
+ break;
+ case SEMGET:
+ ret = sys_semget(first, second, third);
+ break;
+ case SEMCTL:
+ {
+ union semun fourth;
+
+ if (!ptr)
+ break;
+ ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
+ || (get_user(fourth.__pad, (void **)ptr)) ;
+ if (ret)
+ break;
+ ret = sys_semctl(first, second, third, fourth);
+ break;
+ }
+ case MSGSND:
+ ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
+ break;
+ case MSGRCV:
+ switch (version) {
+ case 0: {
+ struct ipc_kludge tmp;
+
+ if (!ptr)
+ break;
+ ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
+ ? 0 : -EFAULT) || copy_from_user(&tmp,
+ (struct ipc_kludge *) ptr, sizeof(tmp));
+ if (ret)
+ break;
+ ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
+ third);
+ break;
+ }
+ default:
+ ret = sys_msgrcv(first, (struct msgbuf *) ptr,
+ second, fifth, third);
+ break;
+ }
+ break;
+ case MSGGET:
+ ret = sys_msgget((key_t) first, second);
+ break;
+ case MSGCTL:
+ ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
+ break;
+ case SHMAT:
+ switch (version) {
+ default: {
+ ulong raddr;
+ ret = access_ok(VERIFY_WRITE, (ulong *) third,
+ sizeof(ulong)) ? 0 : -EFAULT;
+ if (ret)
+ break;
+ ret = do_shmat(first, (char *) ptr, second, &raddr);
+ if (ret)
+ break;
+ ret = put_user(raddr, (ulong *) third);
+ break;
+ }
+ case 1: /* iBCS2 emulator entry point */
+ if (!segment_eq(get_fs(), get_ds()))
+ break;
+ ret = do_shmat(first, (char *) ptr, second,
+ (ulong *) third);
+ break;
+ }
+ break;
+ case SHMDT:
+ ret = sys_shmdt((char *)ptr);
+ break;
+ case SHMGET:
+ ret = sys_shmget(first, second, third);
+ break;
+ case SHMCTL:
+ ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
+ break;
+ }
+ return ret;
+}
+
+asmlinkage int sys_vfork(struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->r1,
+ regs, 0, NULL, NULL);
+}
+
+asmlinkage int sys_clone(int flags, unsigned long stack, struct pt_regs *regs)
+{
+ if (!stack)
+ stack = regs->r1;
+ return do_fork(flags, stack, regs, 0, NULL, NULL);
+}
+
+asmlinkage int sys_execve(char __user *filenamei, char __user *__user *argv,
+ char __user *__user *envp, struct pt_regs *regs)
+{
+ int error;
+ char *filename;
+
+ filename = getname(filenamei);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+out:
+ return error;
+}
+
+asmlinkage unsigned long
+sys_mmap2(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long pgoff)
+{
+ struct file *file = NULL;
+ int ret = -EBADF;
+
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file) {
+ printk(KERN_INFO "no fd in mmap\r\n");
+ goto out;
+ }
+ }
+
+ down_write(¤t->mm->mmap_sem);
+ ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
+ up_write(¤t->mm->mmap_sem);
+ if (file)
+ fput(file);
+out:
+ return ret;
+}
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, off_t offset)
+{
+ int err = -EINVAL;
+
+ if (offset & ~PAGE_MASK) {
+ printk(KERN_INFO "no pagemask in mmap\r\n");
+ goto out;
+ }
+
+ err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
+out:
+ return err;
+}
+
+/*
+ * Do a system call from kernel instead of calling sys_execve so we
+ * end up with proper pt_regs.
+ */
+int kernel_execve(const char *filename, char *const argv[], char *const envp[])
+{
+ register const char *__a __asm__("r5") = filename;
+ register const void *__b __asm__("r6") = argv;
+ register const void *__c __asm__("r7") = envp;
+ register unsigned long __syscall __asm__("r12") = __NR_execve;
+ register unsigned long __ret __asm__("r3");
+ __asm__ __volatile__ ("brki r14, 0x8"
+ : "=r" (__ret), "=r" (__syscall)
+ : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
+ : "r4", "r8", "r9",
+ "r10", "r11", "r14", "cc", "memory");
+ return __ret;
+}
--- /dev/null
+ENTRY(sys_call_table)
+ .long sys_restart_syscall /* 0 - old "setup()" system call,
+ * used for restarting */
+ .long sys_exit
+ .long sys_ni_syscall /* was fork */
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve_wrapper
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_ni_syscall /* old stat */
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid
+ .long sys_getuid
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_ni_syscall /* oldfstat */
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 - old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid
+ .long sys_getgid
+ .long sys_signal
+ .long sys_geteuid
+ .long sys_getegid /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys() */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* olduname */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid /* 70 */
+ .long sys_setregid
+ .long sys_sigsuspend_wrapper
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_ni_syscall /* old_getrlimit */
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups /* 80 */
+ .long sys_setgroups
+ .long sys_ni_syscall /* old_select */
+ .long sys_symlink
+ .long sys_ni_syscall /* oldlstat */
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long sys_ni_syscall /* old_readdir */
+ .long sys_mmap /* 90 */ /* old_mmap */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* ioperm */
+ .long sys_socketcall
+ .long sys_syslog /* operation with system console */
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* uname */
+ .long sys_ni_syscall /* 110 */ /* iopl */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* old sys_vm86old */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn_wrapper
+ .long sys_clone_wrapper /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125: sys_mprotect */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* reserved for afs_syscall */
+ .long sys_setfsuid
+ .long sys_setfsgid
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150: sys_mlock */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid
+ .long sys_getresuid /* 165 */
+ .long sys_ni_syscall /* sys_vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_nfsservctl
+ .long sys_setresgid /* 170 */
+ .long sys_getresgid
+ .long sys_prctl
+ .long sys_rt_sigreturn_wrapper
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend_wrapper
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_ni_syscall /* sigaltstack */
+ .long sys_sendfile
+ .long sys_ni_syscall /* reserved for streams1 */
+ .long sys_ni_syscall /* reserved for streams2 */
+ .long sys_vfork_wrapper /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2 /* mmap2 */
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* set_thread_area */
+ .long sys_ni_syscall /* get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_mbind
+ .long sys_get_mempolicy
+ .long sys_set_mempolicy
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_kexec_load
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get /* 290 */
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_ni_syscall /* sys_migrate_pages */
+ .long sys_openat /* 295 */
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_ni_syscall
+ .long sys_fstatat64 /* 300 */
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat /* 305 */
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_ni_syscall /* pselect6 */
+ .long sys_ni_syscall /* sys_ppoll */
+ .long sys_unshare /* 310 */
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee /* 315 */
+ .long sys_vmsplice
+ .long sys_move_pages
+ .long sys_getcpu
+ .long sys_epoll_pwait
+ .long sys_utimensat /* 320 */
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate
+ .long sys_semtimedop /* 325 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
+ .long sys_semctl
+ .long sys_semget
+ .long sys_semop /* 330 */
+ .long sys_msgctl
+ .long sys_msgget
+ .long sys_msgrcv
+ .long sys_msgsnd
+ .long sys_shmat /* 335 */
+ .long sys_shmctl
+ .long sys_shmdt
+ .long sys_shmget
+ .long sys_signalfd4 /* new syscall */
+ .long sys_eventfd2 /* 340 */
+ .long sys_epoll_create1
+ .long sys_dup3
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_socket /* 345 */
+ .long sys_socketpair
+ .long sys_bind
+ .long sys_listen
+ .long sys_accept
+ .long sys_connect /* 350 */
+ .long sys_getsockname
+ .long sys_getpeername
+ .long sys_sendto
+ .long sys_send
+ .long sys_recvfrom /* 355 */
+ .long sys_recv
+ .long sys_setsockopt
+ .long sys_getsockopt
+ .long sys_shutdown
+ .long sys_sendmsg /* 360 */
+ .long sys_recvmsg
+ .long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_ni_syscall
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/profile.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/io.h>
+#include <asm/cpuinfo.h>
+#include <asm/setup.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_SELFMOD_TIMER
+#include <asm/selfmod.h>
+#define TIMER_BASE BARRIER_BASE_ADDR
+#else
+static unsigned int timer_baseaddr;
+#define TIMER_BASE timer_baseaddr
+#endif
+
+#define TCSR0 (0x00)
+#define TLR0 (0x04)
+#define TCR0 (0x08)
+#define TCSR1 (0x10)
+#define TLR1 (0x14)
+#define TCR1 (0x18)
+
+#define TCSR_MDT (1<<0)
+#define TCSR_UDT (1<<1)
+#define TCSR_GENT (1<<2)
+#define TCSR_CAPT (1<<3)
+#define TCSR_ARHT (1<<4)
+#define TCSR_LOAD (1<<5)
+#define TCSR_ENIT (1<<6)
+#define TCSR_ENT (1<<7)
+#define TCSR_TINT (1<<8)
+#define TCSR_PWMA (1<<9)
+#define TCSR_ENALL (1<<10)
+
+static inline void microblaze_timer0_stop(void)
+{
+ out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0) & ~TCSR_ENT);
+}
+
+static inline void microblaze_timer0_start_periodic(unsigned long load_val)
+{
+ if (!load_val)
+ load_val = 1;
+ out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */
+
+ /* load the initial value */
+ out_be32(TIMER_BASE + TCSR0, TCSR_LOAD);
+
+ /* see timer data sheet for detail
+ * !ENALL - don't enable 'em all
+ * !PWMA - disable pwm
+ * TINT - clear interrupt status
+ * ENT- enable timer itself
+ * EINT - enable interrupt
+ * !LOAD - clear the bit to let go
+ * ARHT - auto reload
+ * !CAPT - no external trigger
+ * !GENT - no external signal
+ * UDT - set the timer as down counter
+ * !MDT0 - generate mode
+ */
+ out_be32(TIMER_BASE + TCSR0,
+ TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+}
+
+static inline void microblaze_timer0_start_oneshot(unsigned long load_val)
+{
+ if (!load_val)
+ load_val = 1;
+ out_be32(TIMER_BASE + TLR0, load_val); /* loading value to timer reg */
+
+ /* load the initial value */
+ out_be32(TIMER_BASE + TCSR0, TCSR_LOAD);
+
+ out_be32(TIMER_BASE + TCSR0,
+ TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+}
+
+static int microblaze_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *dev)
+{
+ pr_debug("%s: next event, delta %x\n", __func__, (u32)delta);
+ microblaze_timer0_start_oneshot(delta);
+ return 0;
+}
+
+static void microblaze_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ printk(KERN_INFO "%s: periodic\n", __func__);
+ microblaze_timer0_start_periodic(cpuinfo.freq_div_hz);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ printk(KERN_INFO "%s: oneshot\n", __func__);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ printk(KERN_INFO "%s: unused\n", __func__);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ printk(KERN_INFO "%s: shutdown\n", __func__);
+ microblaze_timer0_stop();
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ printk(KERN_INFO "%s: resume\n", __func__);
+ break;
+ }
+}
+
+static struct clock_event_device clockevent_microblaze_timer = {
+ .name = "microblaze_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+ .shift = 24,
+ .rating = 300,
+ .set_next_event = microblaze_timer_set_next_event,
+ .set_mode = microblaze_timer_set_mode,
+};
+
+static inline void timer_ack(void)
+{
+ out_be32(TIMER_BASE + TCSR0, in_be32(TIMER_BASE + TCSR0));
+}
+
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = &clockevent_microblaze_timer;
+#ifdef CONFIG_HEART_BEAT
+ heartbeat();
+#endif
+ timer_ack();
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static struct irqaction timer_irqaction = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
+ .name = "timer",
+ .dev_id = &clockevent_microblaze_timer,
+};
+
+static __init void microblaze_clockevent_init(void)
+{
+ clockevent_microblaze_timer.mult =
+ div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC,
+ clockevent_microblaze_timer.shift);
+ clockevent_microblaze_timer.max_delta_ns =
+ clockevent_delta2ns((u32)~0, &clockevent_microblaze_timer);
+ clockevent_microblaze_timer.min_delta_ns =
+ clockevent_delta2ns(1, &clockevent_microblaze_timer);
+ clockevent_microblaze_timer.cpumask = cpumask_of(0);
+ clockevents_register_device(&clockevent_microblaze_timer);
+}
+
+static cycle_t microblaze_read(struct clocksource *cs)
+{
+ /* reading actual value of timer 1 */
+ return (cycle_t) (in_be32(TIMER_BASE + TCR1));
+}
+
+static struct clocksource clocksource_microblaze = {
+ .name = "microblaze_clocksource",
+ .rating = 300,
+ .read = microblaze_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .shift = 24, /* I can shift it */
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init microblaze_clocksource_init(void)
+{
+ clocksource_microblaze.mult =
+ clocksource_hz2mult(cpuinfo.cpu_clock_freq,
+ clocksource_microblaze.shift);
+ if (clocksource_register(&clocksource_microblaze))
+ panic("failed to register clocksource");
+
+ /* stop timer1 */
+ out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT);
+ /* start timer1 - up counting without interrupt */
+ out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+ return 0;
+}
+
+void __init time_init(void)
+{
+ u32 irq, i = 0;
+ u32 timer_num = 1;
+ struct device_node *timer = NULL;
+#ifdef CONFIG_SELFMOD_TIMER
+ unsigned int timer_baseaddr = 0;
+ int arr_func[] = {
+ (int)µblaze_read,
+ (int)&timer_interrupt,
+ (int)µblaze_clocksource_init,
+ (int)µblaze_timer_set_mode,
+ (int)µblaze_timer_set_next_event,
+ 0
+ };
+#endif
+ char *timer_list[] = {
+ "xlnx,xps-timer-1.00.a",
+ "xlnx,opb-timer-1.00.b",
+ "xlnx,opb-timer-1.00.a",
+ NULL
+ };
+
+ for (i = 0; timer_list[i] != NULL; i++) {
+ timer = of_find_compatible_node(NULL, NULL, timer_list[i]);
+ if (timer)
+ break;
+ }
+
+ timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
+ timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);
+ irq = *(int *) of_get_property(timer, "interrupts", NULL);
+ timer_num =
+ *(int *) of_get_property(timer, "xlnx,one-timer-only", NULL);
+ if (timer_num) {
+ printk(KERN_EMERG "Please enable two timers in HW\n");
+ BUG();
+ }
+
+#ifdef CONFIG_SELFMOD_TIMER
+ selfmod_function((int *) arr_func, timer_baseaddr);
+#endif
+ printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n",
+ timer_list[i], timer_baseaddr, irq);
+
+ cpuinfo.freq_div_hz = cpuinfo.cpu_clock_freq / HZ;
+
+ setup_irq(irq, &timer_irqaction);
+#ifdef CONFIG_HEART_BEAT
+ setup_heartbeat();
+#endif
+ microblaze_clocksource_init();
+ microblaze_clockevent_init();
+}
--- /dev/null
+/*
+ * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2007-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kallsyms.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/debug_locks.h>
+
+#include <asm/exceptions.h>
+#include <asm/system.h>
+
+void trap_init(void)
+{
+ __enable_hw_exceptions();
+}
+
+void __bad_xchg(volatile void *ptr, int size)
+{
+ printk(KERN_INFO "xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n",
+ __builtin_return_address(0), ptr, size);
+ BUG();
+}
+EXPORT_SYMBOL(__bad_xchg);
+
+static int kstack_depth_to_print = 24;
+
+static int __init kstack_setup(char *s)
+{
+ kstack_depth_to_print = strict_strtoul(s, 0, NULL);
+
+ return 1;
+}
+__setup("kstack=", kstack_setup);
+
+void show_trace(struct task_struct *task, unsigned long *stack)
+{
+ unsigned long addr;
+
+ if (!stack)
+ stack = (unsigned long *)&stack;
+
+ printk(KERN_NOTICE "Call Trace: ");
+#ifdef CONFIG_KALLSYMS
+ printk(KERN_NOTICE "\n");
+#endif
+ while (!kstack_end(stack)) {
+ addr = *stack++;
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (kernel_text_address(addr))
+ print_ip_sym(addr);
+ }
+ printk(KERN_NOTICE "\n");
+
+ if (!task)
+ task = current;
+
+ debug_show_held_locks(task);
+}
+
+void show_stack(struct task_struct *task, unsigned long *sp)
+{
+ unsigned long *stack;
+ int i;
+
+ if (sp == NULL) {
+ if (task)
+ sp = (unsigned long *) ((struct thread_info *)
+ (task->stack))->cpu_context.r1;
+ else
+ sp = (unsigned long *)&sp;
+ }
+
+ stack = sp;
+
+ printk(KERN_INFO "\nStack:\n ");
+
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (kstack_end(sp))
+ break;
+ if (i && ((i % 8) == 0))
+ printk("\n ");
+ printk("%08lx ", *sp++);
+ }
+ printk("\n");
+ show_trace(task, stack);
+}
+
+void dump_stack(void)
+{
+ show_stack(NULL, NULL);
+}
+EXPORT_SYMBOL(dump_stack);
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze")
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+#include <asm-generic/vmlinux.lds.h>
+
+jiffies = jiffies_64 + 4;
+
+SECTIONS {
+ . = CONFIG_KERNEL_BASE_ADDR;
+
+ .text : {
+ _text = . ;
+ _stext = . ;
+ *(.text .text.*)
+ *(.fixup)
+
+ *(.exitcall.exit)
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ . = ALIGN (4) ;
+ _etext = . ;
+ }
+
+ . = ALIGN (4) ;
+ _fdt_start = . ; /* place for fdt blob */
+ . = . + 0x4000;
+ _fdt_end = . ;
+
+ . = ALIGN(16);
+ RODATA
+ . = ALIGN(16);
+ __ex_table : {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ }
+
+ /*
+ * sdata2 section can go anywhere, but must be word aligned
+ * and SDA2_BASE must point to the middle of it
+ */
+ .sdata2 : {
+ _ssrw = .;
+ . = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
+ *(.sdata2)
+ . = ALIGN(8);
+ _essrw = .;
+ _ssrw_size = _essrw - _ssrw;
+ _KERNEL_SDA2_BASE_ = _ssrw + (_ssrw_size / 2);
+ }
+
+ _sdata = . ;
+ .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
+ *(.data)
+ }
+ . = ALIGN(32);
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ _edata = . ;
+
+ /* Reserve some low RAM for r0 based memory references */
+ . = ALIGN(0x4) ;
+ r0_ram = . ;
+ . = . + 4096; /* a page should be enough */
+
+ /* The initial task */
+ . = ALIGN(8192);
+ .data.init_task : { *(.data.init_task) }
+
+ /* Under the microblaze ABI, .sdata and .sbss must be contiguous */
+ . = ALIGN(8);
+ .sdata : {
+ _ssro = .;
+ *(.sdata)
+ }
+
+ .sbss : {
+ _ssbss = .;
+ *(.sbss)
+ _esbss = .;
+ _essro = .;
+ _ssro_size = _essro - _ssro ;
+ _KERNEL_SDA_BASE_ = _ssro + (_ssro_size / 2) ;
+ }
+
+ __init_begin = .;
+
+ . = ALIGN(4096);
+ .init.text : {
+ _sinittext = . ;
+ *(.init.text)
+ *(.exit.text)
+ *(.exit.data)
+ _einittext = .;
+ }
+
+ .init.data : { *(.init.data) }
+
+ . = ALIGN(4);
+ .init.ivt : {
+ __ivt_start = .;
+ *(.init.ivt)
+ __ivt_end = .;
+ }
+
+ .init.setup : {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+
+ .initcall.init : {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ __init_end_before_initramfs = .;
+
+ .init.ramfs ALIGN(4096) : {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ . = ALIGN(4);
+ LONG(0);
+/*
+ * FIXME this can break initramfs for MMU.
+ * Pad init.ramfs up to page boundary,
+ * so that __init_end == __bss_start. This will make image.elf
+ * consistent with the image.bin
+ */
+ /* . = ALIGN(4096); */
+ }
+ __init_end = .;
+
+ .bss ALIGN (4096) : { /* page aligned when MMU used */
+ __bss_start = . ;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN (4) ;
+ __bss_stop = . ;
+ _ebss = . ;
+ }
+ . = ALIGN(4096);
+ _end = .;
+}
--- /dev/null
+#
+# Makefile
+#
+
+lib-y := memset.o checksum.o
+
+ifeq ($(CONFIG_OPT_LIB_ASM),y)
+lib-y += fastcopy.o
+else
+lib-y += memcpy.o memmove.o
+endif
+
+lib-y += uaccess.o
--- /dev/null
+/*
+ *
+ * INET An implementation of the TCP/IP protocol suite for the LINUX
+ * operating system. INET is implemented using the BSD Socket
+ * interface as the means of communication with the user level.
+ *
+ * IP/TCP/UDP checksumming routines
+ *
+ * Authors: Jorge Cwik, <jorge@laser.satlink.net>
+ * Arnt Gulbrandsen, <agulbra@nvg.unit.no>
+ * Tom May, <ftom@netcom.com>
+ * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de>
+ * Lots of code moved from tcp.c and ip.c; see those files
+ * for more names.
+ *
+ * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek:
+ * Fixed some nasty bugs, causing some horrible crashes.
+ * A: At some points, the sum (%0) was used as
+ * length-counter instead of the length counter
+ * (%1). Thanks to Roman Hodek for pointing this out.
+ * B: GCC seems to mess up if one uses too many
+ * data-registers to hold input values and one tries to
+ * specify d0 and d1 as scratch registers. Letting gcc
+ * choose these registers itself solves the problem.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access
+ kills, so most of the assembly has to go. */
+
+#include <net/checksum.h>
+#include <asm/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned short from32to16(unsigned long x)
+{
+ /* add up 16-bit and 16-bit for 16+c bit */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up carry.. */
+ x = (x & 0xffff) + (x >> 16);
+ return x;
+}
+
+static unsigned int do_csum(const unsigned char *buff, int len)
+{
+ int odd, count;
+ unsigned long result = 0;
+
+ if (len <= 0)
+ goto out;
+ odd = 1 & (unsigned long) buff;
+ if (odd) {
+ result = *buff;
+ len--;
+ buff++;
+ }
+ count = len >> 1; /* nr of 16-bit words.. */
+ if (count) {
+ if (2 & (unsigned long) buff) {
+ result += *(unsigned short *) buff;
+ count--;
+ len -= 2;
+ buff += 2;
+ }
+ count >>= 1; /* nr of 32-bit words.. */
+ if (count) {
+ unsigned long carry = 0;
+ do {
+ unsigned long w = *(unsigned long *) buff;
+ count--;
+ buff += 4;
+ result += carry;
+ result += w;
+ carry = (w > result);
+ } while (count);
+ result += carry;
+ result = (result & 0xffff) + (result >> 16);
+ }
+ if (len & 2) {
+ result += *(unsigned short *) buff;
+ buff += 2;
+ }
+ }
+ if (len & 1)
+ result += (*buff << 8);
+ result = from32to16(result);
+ if (odd)
+ result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
+out:
+ return result;
+}
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+ return (__force __sum16)~do_csum(iph, ihl*4);
+}
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum)
+{
+ unsigned int result = do_csum(buff, len);
+
+ /* add in old sum, and carry.. */
+ result += sum;
+ if (sum > result)
+ result += 1;
+ return result;
+}
+EXPORT_SYMBOL(csum_partial);
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+__sum16 ip_compute_csum(const unsigned char *buff, int len)
+{
+ return ~do_csum(buff, len);
+}
+EXPORT_SYMBOL(ip_compute_csum);
+
+/*
+ * copy from fs while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy_from_user(const char __user *src, char *dst, int len,
+ int sum, int *csum_err)
+{
+ if (csum_err)
+ *csum_err = 0;
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+
+/*
+ * copy from ds while checksumming, otherwise like csum_partial
+ */
+__wsum
+csum_partial_copy(const char *src, char *dst, int len, int sum)
+{
+ memcpy(dst, src, len);
+ return csum_partial(dst, len, sum);
+}
+EXPORT_SYMBOL(csum_partial_copy);
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2008 Jim Law - Iris LP All rights reserved.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Jim Law <jlaw@irispower.com>
+ *
+ * intended to replace:
+ * memcpy in memcpy.c and
+ * memmove in memmove.c
+ * ... in arch/microblaze/lib
+ *
+ *
+ * assly_fastcopy.S
+ *
+ * Attempt at quicker memcpy and memmove for MicroBlaze
+ * Input : Operand1 in Reg r5 - destination address
+ * Operand2 in Reg r6 - source address
+ * Operand3 in Reg r7 - number of bytes to transfer
+ * Output: Result in Reg r3 - starting destinaition address
+ *
+ *
+ * Explanation:
+ * Perform (possibly unaligned) copy of a block of memory
+ * between mem locations with size of xfer spec'd in bytes
+ */
+
+#include <linux/linkage.h>
+
+ .globl memcpy
+ .ent memcpy
+
+memcpy:
+fast_memcpy_ascending:
+ /* move d to return register as value of function */
+ addi r3, r5, 0
+
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4, a_xfer_end /* if n < 0, less than one word to transfer */
+
+ /* transfer first 0~3 bytes to get aligned dest address */
+ andi r4, r5, 3 /* n = d & 3 */
+ /* if zero, destination already aligned */
+ beqi r4, a_dalign_done
+ /* n = 4 - n (yields 3, 2, 1 transfers for 1, 2, 3 addr offset) */
+ rsubi r4, r4, 4
+ rsub r7, r4, r7 /* c = c - n adjust c */
+
+a_xfer_first_loop:
+ /* if no bytes left to transfer, transfer the bulk */
+ beqi r4, a_dalign_done
+ lbui r11, r6, 0 /* h = *s */
+ sbi r11, r5, 0 /* *d = h */
+ addi r6, r6, 1 /* s++ */
+ addi r5, r5, 1 /* d++ */
+ brid a_xfer_first_loop /* loop */
+ addi r4, r4, -1 /* n-- (IN DELAY SLOT) */
+
+a_dalign_done:
+ addi r4, r0, 32 /* n = 32 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ /* if n < 0, less than one block to transfer */
+ blti r4, a_block_done
+
+a_block_xfer:
+ andi r4, r7, 0xffffffe0 /* n = c & ~31 */
+ rsub r7, r4, r7 /* c = c - n */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, a_block_unaligned
+
+a_block_aligned:
+ lwi r9, r6, 0 /* t1 = *(s + 0) */
+ lwi r10, r6, 4 /* t2 = *(s + 4) */
+ lwi r11, r6, 8 /* t3 = *(s + 8) */
+ lwi r12, r6, 12 /* t4 = *(s + 12) */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ swi r10, r5, 4 /* *(d + 4) = t2 */
+ swi r11, r5, 8 /* *(d + 8) = t3 */
+ swi r12, r5, 12 /* *(d + 12) = t4 */
+ lwi r9, r6, 16 /* t1 = *(s + 16) */
+ lwi r10, r6, 20 /* t2 = *(s + 20) */
+ lwi r11, r6, 24 /* t3 = *(s + 24) */
+ lwi r12, r6, 28 /* t4 = *(s + 28) */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ swi r10, r5, 20 /* *(d + 20) = t2 */
+ swi r11, r5, 24 /* *(d + 24) = t3 */
+ swi r12, r5, 28 /* *(d + 28) = t4 */
+ addi r6, r6, 32 /* s = s + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_block_aligned /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+ bri a_block_done
+
+a_block_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ add r6, r6, r4 /* s = s + n */
+ lwi r11, r8, 0 /* h = *(as + 0) */
+
+ addi r9, r9, -1
+ beqi r9, a_block_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9, a_block_u2 /* t1 was 2 => 2 byte offset */
+
+a_block_u3:
+ bslli r11, r11, 24 /* h = h << 24 */
+a_bu3_loop:
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ lwi r12, r8, 32 /* v = *(as + 32) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ addi r8, r8, 32 /* as = as + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_bu3_loop /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+ bri a_block_done
+
+a_block_u1:
+ bslli r11, r11, 8 /* h = h << 8 */
+a_bu1_loop:
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ lwi r12, r8, 32 /* v = *(as + 32) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ addi r8, r8, 32 /* as = as + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_bu1_loop /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+ bri a_block_done
+
+a_block_u2:
+ bslli r11, r11, 16 /* h = h << 16 */
+a_bu2_loop:
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ lwi r12, r8, 32 /* v = *(as + 32) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ addi r8, r8, 32 /* as = as + 32 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, a_bu2_loop /* while (n) loop */
+ addi r5, r5, 32 /* d = d + 32 (IN DELAY SLOT) */
+
+a_block_done:
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4, a_xfer_end /* if n < 0, less than one word to transfer */
+
+a_word_xfer:
+ andi r4, r7, 0xfffffffc /* n = c & ~3 */
+ addi r10, r0, 0 /* offset = 0 */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, a_word_unaligned
+
+a_word_aligned:
+ lw r9, r6, r10 /* t1 = *(s+offset) */
+ sw r9, r5, r10 /* *(d+offset) = t1 */
+ addi r4, r4,-4 /* n-- */
+ bneid r4, a_word_aligned /* loop */
+ addi r10, r10, 4 /* offset++ (IN DELAY SLOT) */
+
+ bri a_word_done
+
+a_word_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ lwi r11, r8, 0 /* h = *(as + 0) */
+ addi r8, r8, 4 /* as = as + 4 */
+
+ addi r9, r9, -1
+ beqi r9, a_word_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9, a_word_u2 /* t1 was 2 => 2 byte offset */
+
+a_word_u3:
+ bslli r11, r11, 24 /* h = h << 24 */
+a_wu3_loop:
+ lw r12, r8, r10 /* v = *(as + offset) */
+ bsrli r9, r12, 8 /* t1 = v >> 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r10 /* *(d + offset) = t1 */
+ bslli r11, r12, 24 /* h = v << 24 */
+ addi r4, r4,-4 /* n = n - 4 */
+ bneid r4, a_wu3_loop /* while (n) loop */
+ addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */
+
+ bri a_word_done
+
+a_word_u1:
+ bslli r11, r11, 8 /* h = h << 8 */
+a_wu1_loop:
+ lw r12, r8, r10 /* v = *(as + offset) */
+ bsrli r9, r12, 24 /* t1 = v >> 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r10 /* *(d + offset) = t1 */
+ bslli r11, r12, 8 /* h = v << 8 */
+ addi r4, r4,-4 /* n = n - 4 */
+ bneid r4, a_wu1_loop /* while (n) loop */
+ addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */
+
+ bri a_word_done
+
+a_word_u2:
+ bslli r11, r11, 16 /* h = h << 16 */
+a_wu2_loop:
+ lw r12, r8, r10 /* v = *(as + offset) */
+ bsrli r9, r12, 16 /* t1 = v >> 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r10 /* *(d + offset) = t1 */
+ bslli r11, r12, 16 /* h = v << 16 */
+ addi r4, r4,-4 /* n = n - 4 */
+ bneid r4, a_wu2_loop /* while (n) loop */
+ addi r10, r10, 4 /* offset = ofset + 4 (IN DELAY SLOT) */
+
+a_word_done:
+ add r5, r5, r10 /* d = d + offset */
+ add r6, r6, r10 /* s = s + offset */
+ rsub r7, r10, r7 /* c = c - offset */
+
+a_xfer_end:
+a_xfer_end_loop:
+ beqi r7, a_done /* while (c) */
+ lbui r9, r6, 0 /* t1 = *s */
+ addi r6, r6, 1 /* s++ */
+ sbi r9, r5, 0 /* *d = t1 */
+ addi r7, r7, -1 /* c-- */
+ brid a_xfer_end_loop /* loop */
+ addi r5, r5, 1 /* d++ (IN DELAY SLOT) */
+
+a_done:
+ rtsd r15, 8
+ nop
+
+.end memcpy
+/*----------------------------------------------------------------------------*/
+ .globl memmove
+ .ent memmove
+
+memmove:
+ cmpu r4, r5, r6 /* n = s - d */
+ bgei r4,fast_memcpy_ascending
+
+fast_memcpy_descending:
+ /* move d to return register as value of function */
+ addi r3, r5, 0
+
+ add r5, r5, r7 /* d = d + c */
+ add r6, r6, r7 /* s = s + c */
+
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4,d_xfer_end /* if n < 0, less than one word to transfer */
+
+ /* transfer first 0~3 bytes to get aligned dest address */
+ andi r4, r5, 3 /* n = d & 3 */
+ /* if zero, destination already aligned */
+ beqi r4,d_dalign_done
+ rsub r7, r4, r7 /* c = c - n adjust c */
+
+d_xfer_first_loop:
+ /* if no bytes left to transfer, transfer the bulk */
+ beqi r4,d_dalign_done
+ addi r6, r6, -1 /* s-- */
+ addi r5, r5, -1 /* d-- */
+ lbui r11, r6, 0 /* h = *s */
+ sbi r11, r5, 0 /* *d = h */
+ brid d_xfer_first_loop /* loop */
+ addi r4, r4, -1 /* n-- (IN DELAY SLOT) */
+
+d_dalign_done:
+ addi r4, r0, 32 /* n = 32 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ /* if n < 0, less than one block to transfer */
+ blti r4, d_block_done
+
+d_block_xfer:
+ andi r4, r7, 0xffffffe0 /* n = c & ~31 */
+ rsub r7, r4, r7 /* c = c - n */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, d_block_unaligned
+
+d_block_aligned:
+ addi r6, r6, -32 /* s = s - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r9, r6, 28 /* t1 = *(s + 28) */
+ lwi r10, r6, 24 /* t2 = *(s + 24) */
+ lwi r11, r6, 20 /* t3 = *(s + 20) */
+ lwi r12, r6, 16 /* t4 = *(s + 16) */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ swi r10, r5, 24 /* *(d + 24) = t2 */
+ swi r11, r5, 20 /* *(d + 20) = t3 */
+ swi r12, r5, 16 /* *(d + 16) = t4 */
+ lwi r9, r6, 12 /* t1 = *(s + 12) */
+ lwi r10, r6, 8 /* t2 = *(s + 8) */
+ lwi r11, r6, 4 /* t3 = *(s + 4) */
+ lwi r12, r6, 0 /* t4 = *(s + 0) */
+ swi r9, r5, 12 /* *(d + 12) = t1 */
+ swi r10, r5, 8 /* *(d + 8) = t2 */
+ swi r11, r5, 4 /* *(d + 4) = t3 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_block_aligned /* while (n) loop */
+ swi r12, r5, 0 /* *(d + 0) = t4 (IN DELAY SLOT) */
+ bri d_block_done
+
+d_block_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ rsub r6, r4, r6 /* s = s - n */
+ lwi r11, r8, 0 /* h = *(as + 0) */
+
+ addi r9, r9, -1
+ beqi r9,d_block_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9,d_block_u2 /* t1 was 2 => 2 byte offset */
+
+d_block_u3:
+ bsrli r11, r11, 8 /* h = h >> 8 */
+d_bu3_loop:
+ addi r8, r8, -32 /* as = as - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 112) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bsrli r11, r12, 8 /* h = v >> 8 */
+ lwi r12, r8, 0 /* v = *(as + 0) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_bu3_loop /* while (n) loop */
+ bsrli r11, r12, 8 /* h = v >> 8 (IN DELAY SLOT) */
+ bri d_block_done
+
+d_block_u1:
+ bsrli r11, r11, 24 /* h = h >> 24 */
+d_bu1_loop:
+ addi r8, r8, -32 /* as = as - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 112) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bsrli r11, r12, 24 /* h = v >> 24 */
+ lwi r12, r8, 0 /* v = *(as + 0) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_bu1_loop /* while (n) loop */
+ bsrli r11, r12, 24 /* h = v >> 24 (IN DELAY SLOT) */
+ bri d_block_done
+
+d_block_u2:
+ bsrli r11, r11, 16 /* h = h >> 16 */
+d_bu2_loop:
+ addi r8, r8, -32 /* as = as - 32 */
+ addi r5, r5, -32 /* d = d - 32 */
+ lwi r12, r8, 28 /* v = *(as + 28) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 28 /* *(d + 28) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 24 /* v = *(as + 24) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 24 /* *(d + 24) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 20 /* v = *(as + 20) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 20 /* *(d + 20) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 16 /* v = *(as + 16) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 16 /* *(d + 16) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 12 /* v = *(as + 12) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 12 /* *(d + 112) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 8 /* v = *(as + 8) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 8 /* *(d + 8) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 4 /* v = *(as + 4) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 4 /* *(d + 4) = t1 */
+ bsrli r11, r12, 16 /* h = v >> 16 */
+ lwi r12, r8, 0 /* v = *(as + 0) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ swi r9, r5, 0 /* *(d + 0) = t1 */
+ addi r4, r4, -32 /* n = n - 32 */
+ bneid r4, d_bu2_loop /* while (n) loop */
+ bsrli r11, r12, 16 /* h = v >> 16 (IN DELAY SLOT) */
+
+d_block_done:
+ addi r4, r0, 4 /* n = 4 */
+ cmpu r4, r4, r7 /* n = c - n (unsigned) */
+ blti r4,d_xfer_end /* if n < 0, less than one word to transfer */
+
+d_word_xfer:
+ andi r4, r7, 0xfffffffc /* n = c & ~3 */
+ rsub r5, r4, r5 /* d = d - n */
+ rsub r6, r4, r6 /* s = s - n */
+ rsub r7, r4, r7 /* c = c - n */
+
+ andi r9, r6, 3 /* t1 = s & 3 */
+ /* if temp != 0, unaligned transfers needed */
+ bnei r9, d_word_unaligned
+
+d_word_aligned:
+ addi r4, r4,-4 /* n-- */
+ lw r9, r6, r4 /* t1 = *(s+n) */
+ bneid r4, d_word_aligned /* loop */
+ sw r9, r5, r4 /* *(d+n) = t1 (IN DELAY SLOT) */
+
+ bri d_word_done
+
+d_word_unaligned:
+ andi r8, r6, 0xfffffffc /* as = s & ~3 */
+ lw r11, r8, r4 /* h = *(as + n) */
+
+ addi r9, r9, -1
+ beqi r9,d_word_u1 /* t1 was 1 => 1 byte offset */
+ addi r9, r9, -1
+ beqi r9,d_word_u2 /* t1 was 2 => 2 byte offset */
+
+d_word_u3:
+ bsrli r11, r11, 8 /* h = h >> 8 */
+d_wu3_loop:
+ addi r4, r4,-4 /* n = n - 4 */
+ lw r12, r8, r4 /* v = *(as + n) */
+ bslli r9, r12, 24 /* t1 = v << 24 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r4 /* *(d + n) = t1 */
+ bneid r4, d_wu3_loop /* while (n) loop */
+ bsrli r11, r12, 8 /* h = v >> 8 (IN DELAY SLOT) */
+
+ bri d_word_done
+
+d_word_u1:
+ bsrli r11, r11, 24 /* h = h >> 24 */
+d_wu1_loop:
+ addi r4, r4,-4 /* n = n - 4 */
+ lw r12, r8, r4 /* v = *(as + n) */
+ bslli r9, r12, 8 /* t1 = v << 8 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r4 /* *(d + n) = t1 */
+ bneid r4, d_wu1_loop /* while (n) loop */
+ bsrli r11, r12, 24 /* h = v >> 24 (IN DELAY SLOT) */
+
+ bri d_word_done
+
+d_word_u2:
+ bsrli r11, r11, 16 /* h = h >> 16 */
+d_wu2_loop:
+ addi r4, r4,-4 /* n = n - 4 */
+ lw r12, r8, r4 /* v = *(as + n) */
+ bslli r9, r12, 16 /* t1 = v << 16 */
+ or r9, r11, r9 /* t1 = h | t1 */
+ sw r9, r5, r4 /* *(d + n) = t1 */
+ bneid r4, d_wu2_loop /* while (n) loop */
+ bsrli r11, r12, 16 /* h = v >> 16 (IN DELAY SLOT) */
+
+d_word_done:
+
+d_xfer_end:
+d_xfer_end_loop:
+ beqi r7, a_done /* while (c) */
+ addi r6, r6, -1 /* s-- */
+ lbui r9, r6, 0 /* t1 = *s */
+ addi r5, r5, -1 /* d-- */
+ sbi r9, r5, 0 /* *d = t1 */
+ brid d_xfer_end_loop /* loop */
+ addi r7, r7, -1 /* c-- (IN DELAY SLOT) */
+
+d_done:
+ rtsd r15, 8
+ nop
+
+.end memmove
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccesfully, to contact the original
+ * author of this code (Michael Morrow, Intel). Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+
+#include <linux/string.h>
+#include <asm/system.h>
+
+#ifdef __HAVE_ARCH_MEMCPY
+void *memcpy(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+ const char *src = v_src;
+ char *dst = v_dst;
+#ifndef CONFIG_OPT_LIB_FUNCTION
+ /* Simple, byte oriented memcpy. */
+ while (c--)
+ *dst++ = *src++;
+
+ return v_dst;
+#else
+ /* The following code tries to optimize the copy by using unsigned
+ * alignment. This will work fine if both source and destination are
+ * aligned on the same boundary. However, if they are aligned on
+ * different boundaries shifts will be necessary. This might result in
+ * bad performance on MicroBlaze systems without a barrel shifter.
+ */
+ const uint32_t *i_src;
+ uint32_t *i_dst;
+
+ if (c >= 4) {
+ unsigned value, buf_hold;
+
+ /* Align the dstination to a word boundry. */
+ /* This is done in an endian independant manner. */
+ switch ((unsigned long)dst & 3) {
+ case 1:
+ *dst++ = *src++;
+ --c;
+ case 2:
+ *dst++ = *src++;
+ --c;
+ case 3:
+ *dst++ = *src++;
+ --c;
+ }
+
+ i_dst = (void *)dst;
+
+ /* Choose a copy scheme based on the source */
+ /* alignment relative to dstination. */
+ switch ((unsigned long)src & 3) {
+ case 0x0: /* Both byte offsets are aligned */
+ i_src = (const void *)src;
+
+ for (; c >= 4; c -= 4)
+ *i_dst++ = *i_src++;
+
+ src = (const void *)i_src;
+ break;
+ case 0x1: /* Unaligned - Off by 1 */
+ /* Word align the source */
+ i_src = (const void *) ((unsigned)src & ~3);
+
+ /* Load the holding buffer */
+ buf_hold = *i_src++ << 8;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | value >> 24;
+ buf_hold = value << 8;
+ }
+
+ /* Realign the source */
+ src = (const void *)i_src;
+ src -= 3;
+ break;
+ case 0x2: /* Unaligned - Off by 2 */
+ /* Word align the source */
+ i_src = (const void *) ((unsigned)src & ~3);
+
+ /* Load the holding buffer */
+ buf_hold = *i_src++ << 16;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | value >> 16;
+ buf_hold = value << 16;
+ }
+
+ /* Realign the source */
+ src = (const void *)i_src;
+ src -= 2;
+ break;
+ case 0x3: /* Unaligned - Off by 3 */
+ /* Word align the source */
+ i_src = (const void *) ((unsigned)src & ~3);
+
+ /* Load the holding buffer */
+ buf_hold = *i_src++ << 24;
+
+ for (; c >= 4; c -= 4) {
+ value = *i_src++;
+ *i_dst++ = buf_hold | value >> 8;
+ buf_hold = value << 24;
+ }
+
+ /* Realign the source */
+ src = (const void *)i_src;
+ src -= 1;
+ break;
+ }
+ dst = (void *)i_dst;
+ }
+
+ /* Finish off any remaining bytes */
+ /* simple fast copy, ... unless a cache boundry is crossed */
+ switch (c) {
+ case 3:
+ *dst++ = *src++;
+ case 2:
+ *dst++ = *src++;
+ case 1:
+ *dst++ = *src++;
+ }
+
+ return v_dst;
+#endif
+}
+EXPORT_SYMBOL(memcpy);
+#endif /* __HAVE_ARCH_MEMCPY */
+
+void *cacheable_memcpy(void *d, const void *s, __kernel_size_t c)
+{
+ return memcpy(d, s, c);
+}
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memcpy on Microblaze
+ * This is generic C code to do efficient, alignment-aware memmove.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccesfully, to contact the original
+ * author of this code (Michael Morrow, Intel). Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#ifdef __HAVE_ARCH_MEMMOVE
+void *memmove(void *v_dst, const void *v_src, __kernel_size_t c)
+{
+ const char *src = v_src;
+ char *dst = v_dst;
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+ const uint32_t *i_src;
+ uint32_t *i_dst;
+#endif
+
+ if (!c)
+ return v_dst;
+
+ /* Use memcpy when source is higher than dest */
+ if (v_dst <= v_src)
+ return memcpy(v_dst, v_src, c);
+
+#ifndef CONFIG_OPT_LIB_FUNCTION
+ /* copy backwards, from end to beginning */
+ src += c;
+ dst += c;
+
+ /* Simple, byte oriented memmove. */
+ while (c--)
+ *--dst = *--src;
+
+ return v_dst;
+#else
+ /* The following code tries to optimize the copy by using unsigned
+ * alignment. This will work fine if both source and destination are
+ * aligned on the same boundary. However, if they are aligned on
+ * different boundaries shifts will be necessary. This might result in
+ * bad performance on MicroBlaze systems without a barrel shifter.
+ */
+ /* FIXME this part needs more test */
+ /* Do a descending copy - this is a bit trickier! */
+ dst += c;
+ src += c;
+
+ if (c >= 4) {
+ unsigned value, buf_hold;
+
+ /* Align the destination to a word boundry. */
+ /* This is done in an endian independant manner. */
+
+ switch ((unsigned long)dst & 3) {
+ case 3:
+ *--dst = *--src;
+ --c;
+ case 2:
+ *--dst = *--src;
+ --c;
+ case 1:
+ *--dst = *--src;
+ --c;
+ }
+
+ i_dst = (void *)dst;
+ /* Choose a copy scheme based on the source */
+ /* alignment relative to dstination. */
+ switch ((unsigned long)src & 3) {
+ case 0x0: /* Both byte offsets are aligned */
+
+ i_src = (const void *)src;
+
+ for (; c >= 4; c -= 4)
+ *--i_dst = *--i_src;
+
+ src = (const void *)i_src;
+ break;
+ case 0x1: /* Unaligned - Off by 1 */
+ /* Word align the source */
+ i_src = (const void *) (((unsigned)src + 4) & ~3);
+
+ /* Load the holding buffer */
+ buf_hold = *--i_src >> 24;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold << 8 | value;
+ buf_hold = value >> 24;
+ }
+
+ /* Realign the source */
+ src = (const void *)i_src;
+ src += 1;
+ break;
+ case 0x2: /* Unaligned - Off by 2 */
+ /* Word align the source */
+ i_src = (const void *) (((unsigned)src + 4) & ~3);
+
+ /* Load the holding buffer */
+ buf_hold = *--i_src >> 16;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold << 16 | value;
+ buf_hold = value >> 16;
+ }
+
+ /* Realign the source */
+ src = (const void *)i_src;
+ src += 2;
+ break;
+ case 0x3: /* Unaligned - Off by 3 */
+ /* Word align the source */
+ i_src = (const void *) (((unsigned)src + 4) & ~3);
+
+ /* Load the holding buffer */
+ buf_hold = *--i_src >> 8;
+
+ for (; c >= 4; c -= 4) {
+ value = *--i_src;
+ *--i_dst = buf_hold << 24 | value;
+ buf_hold = value >> 8;
+ }
+
+ /* Realign the source */
+ src = (const void *)i_src;
+ src += 3;
+ break;
+ }
+ dst = (void *)i_dst;
+ }
+
+ /* simple fast copy, ... unless a cache boundry is crossed */
+ /* Finish off any remaining bytes */
+ switch (c) {
+ case 4:
+ *--dst = *--src;
+ case 3:
+ *--dst = *--src;
+ case 2:
+ *--dst = *--src;
+ case 1:
+ *--dst = *--src;
+ }
+ return v_dst;
+#endif
+}
+EXPORT_SYMBOL(memmove);
+#endif /* __HAVE_ARCH_MEMMOVE */
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2008-2009 PetaLogix
+ * Copyright (C) 2007 John Williams
+ *
+ * Reasonably optimised generic C-code for memset on Microblaze
+ * This is generic C code to do efficient, alignment-aware memcpy.
+ *
+ * It is based on demo code originally Copyright 2001 by Intel Corp, taken from
+ * http://www.embedded.com/showArticle.jhtml?articleID=19205567
+ *
+ * Attempts were made, unsuccesfully, to contact the original
+ * author of this code (Michael Morrow, Intel). Below is the original
+ * copyright notice.
+ *
+ * This software has been developed by Intel Corporation.
+ * Intel specifically disclaims all warranties, express or
+ * implied, and all liability, including consequential and
+ * other indirect damages, for the use of this program, including
+ * liability for infringement of any proprietary rights,
+ * and including the warranties of merchantability and fitness
+ * for a particular purpose. Intel does not assume any
+ * responsibility for and errors which may appear in this program
+ * not any responsibility to update it.
+ */
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#ifdef __HAVE_ARCH_MEMSET
+void *memset(void *v_src, int c, __kernel_size_t n)
+{
+
+ char *src = v_src;
+#ifdef CONFIG_OPT_LIB_FUNCTION
+ uint32_t *i_src;
+ uint32_t w32;
+#endif
+ /* Truncate c to 8 bits */
+ c = (c & 0xFF);
+
+#ifdef CONFIG_OPT_LIB_FUNCTION
+ /* Make a repeating word out of it */
+ w32 = c;
+ w32 |= w32 << 8;
+ w32 |= w32 << 16;
+
+ if (n >= 4) {
+ /* Align the destination to a word boundary */
+ /* This is done in an endian independant manner */
+ switch ((unsigned) src & 3) {
+ case 1:
+ *src++ = c;
+ --n;
+ case 2:
+ *src++ = c;
+ --n;
+ case 3:
+ *src++ = c;
+ --n;
+ }
+
+ i_src = (void *)src;
+
+ /* Do as many full-word copies as we can */
+ for (; n >= 4; n -= 4)
+ *i_src++ = w32;
+
+ src = (void *)i_src;
+ }
+#endif
+ /* Simple, byte oriented memset or the rest of count. */
+ while (n--)
+ *src++ = c;
+
+ return v_src;
+}
+EXPORT_SYMBOL(memset);
+#endif /* __HAVE_ARCH_MEMSET */
--- /dev/null
+/*
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/string.h>
+#include <asm/uaccess.h>
+
+#include <asm/bug.h>
+
+long strnlen_user(const char __user *src, long count)
+{
+ return strlen(src) + 1;
+}
+
+#define __do_strncpy_from_user(dst, src, count, res) \
+ do { \
+ char *tmp; \
+ strncpy(dst, src, count); \
+ for (tmp = dst; *tmp && count > 0; tmp++, count--) \
+ ; \
+ res = (tmp - dst); \
+ } while (0)
+
+long __strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ long res;
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
+
+long strncpy_from_user(char *dst, const char __user *src, long count)
+{
+ long res = -EFAULT;
+ if (access_ok(VERIFY_READ, src, 1))
+ __do_strncpy_from_user(dst, src, count, res);
+ return res;
+}
--- /dev/null
+#
+# Makefile
+#
+
+obj-y := init.o
--- /dev/null
+/*
+ * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2006 Atmark Techno, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/bootmem.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/lmb.h>
+#include <linux/mm.h> /* mem_init */
+#include <linux/initrd.h>
+#include <linux/pagemap.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+
+#include <asm/page.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+#include <asm/tlb.h>
+
+unsigned int __page_offset;
+/* EXPORT_SYMBOL(__page_offset); */
+
+char *klimit = _end;
+
+/*
+ * Initialize the bootmem system and give it all the memory we
+ * have available.
+ */
+unsigned int memory_start;
+unsigned int memory_end; /* due to mm/nommu.c */
+unsigned int memory_size;
+
+/*
+ * paging_init() sets up the page tables - in fact we've already done this.
+ */
+static void __init paging_init(void)
+{
+ int i;
+ unsigned long zones_size[MAX_NR_ZONES];
+
+ /*
+ * old: we can DMA to/from any address.put all page into ZONE_DMA
+ * We use only ZONE_NORMAL
+ */
+ zones_size[ZONE_NORMAL] = max_mapnr;
+
+ /* every other zones are empty */
+ for (i = 1; i < MAX_NR_ZONES; i++)
+ zones_size[i] = 0;
+
+ free_area_init(zones_size);
+}
+
+void __init setup_memory(void)
+{
+ int i;
+ unsigned long map_size;
+ u32 kernel_align_start, kernel_align_size;
+
+ /* Find main memory where is the kernel */
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ memory_start = (u32) lmb.memory.region[i].base;
+ memory_end = (u32) lmb.memory.region[i].base
+ + (u32) lmb.memory.region[i].size;
+ if ((memory_start <= (u32)_text) &&
+ ((u32)_text <= memory_end)) {
+ memory_size = memory_end - memory_start;
+ PAGE_OFFSET = memory_start;
+ printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, "
+ "size 0x%08x\n", __func__, memory_start,
+ memory_end, memory_size);
+ break;
+ }
+ }
+
+ if (!memory_start || !memory_end) {
+ panic("%s: Missing memory setting 0x%08x-0x%08x\n",
+ __func__, memory_start, memory_end);
+ }
+
+ /* reservation of region where is the kernel */
+ kernel_align_start = PAGE_DOWN((u32)_text);
+ /* ALIGN can be remove because _end in vmlinux.lds.S is align */
+ kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
+ lmb_reserve(kernel_align_start, kernel_align_size);
+ printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
+ __func__, kernel_align_start, kernel_align_start
+ + kernel_align_size, kernel_align_size);
+
+ /*
+ * Kernel:
+ * start: base phys address of kernel - page align
+ * end: base phys address of kernel - page align
+ *
+ * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
+ * max_low_pfn
+ * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
+ * num_physpages - number of all pages
+ */
+
+ /* memory start is from the kernel end (aligned) to higher addr */
+ min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
+ /* RAM is assumed contiguous */
+ num_physpages = max_mapnr = memory_size >> PAGE_SHIFT;
+ max_pfn = max_low_pfn = memory_end >> PAGE_SHIFT;
+
+ printk(KERN_INFO "%s: max_mapnr: %#lx\n", __func__, max_mapnr);
+ printk(KERN_INFO "%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
+ printk(KERN_INFO "%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
+
+ /*
+ * Find an area to use for the bootmem bitmap.
+ * We look for the first area which is at least
+ * 128kB in length (128kB is enough for a bitmap
+ * for 4GB of memory, using 4kB pages), plus 1 page
+ * (in case the address isn't page-aligned).
+ */
+ map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+ min_low_pfn, max_low_pfn);
+
+ lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+
+ /* free bootmem is whole main memory */
+ free_bootmem(memory_start, memory_size);
+
+ /* reserve allocate blocks */
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
+ (u32) lmb.reserved.region[i].base,
+ (u32) lmb_size_bytes(&lmb.reserved, i));
+ reserve_bootmem(lmb.reserved.region[i].base,
+ lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+ }
+ paging_init();
+}
+
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr;
+
+ for (addr = begin; addr < end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ memset((void *)addr, 0xcc, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void free_initrd_mem(unsigned long start, unsigned long end)
+{
+ int pages = 0;
+ for (; start < end; start += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(start));
+ init_page_count(virt_to_page(start));
+ free_page(start);
+ totalram_pages++;
+ pages++;
+ }
+ printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+}
+#endif
+
+void free_initmem(void)
+{
+ free_init_pages("unused kernel memory",
+ (unsigned long)(&__init_begin),
+ (unsigned long)(&__init_end));
+}
+
+/* FIXME from arch/powerpc/mm/mem.c*/
+void show_mem(void)
+{
+ printk(KERN_NOTICE "%s\n", __func__);
+}
+
+void __init mem_init(void)
+{
+ high_memory = (void *)__va(memory_end);
+ /* this will put all memory onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ printk(KERN_INFO "Memory: %luk/%luk available\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+ num_physpages << (PAGE_SHIFT-10));
+}
+
+/* Check against bounds of physical memory */
+int ___range_ok(unsigned long addr, unsigned long size)
+{
+ return ((addr < memory_start) ||
+ ((addr + size) > memory_end));
+}
--- /dev/null
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+# Platform selection Kconfig menu for MicroBlaze targets
+#
+
+menu "Platform options"
+choice
+ prompt "Platform"
+ default PLATFORM_MICROBLAZE_AUTO
+ help
+ Choose which hardware board/platform you are targeting.
+
+config PLATFORM_GENERIC
+ bool "Generic"
+ help
+ Choose this option for the Generic platform.
+
+endchoice
+
+config SELFMOD
+ bool "Use self modified code for intc/timer"
+ depends on EXPERIMENTAL && NO_MMU
+ default n
+ help
+ This choice enables self-modified code for interrupt controller
+ and timer.
+
+config SELFMOD_INTC
+ bool "Use self modified code for intc"
+ depends on SELFMOD
+ default y
+ help
+ This choice enables self-modified code for interrupt controller.
+
+config SELFMOD_TIMER
+ bool "Use self modified code for timer"
+ depends on SELFMOD
+ default y
+ help
+ This choice enables self-modified code for timer.
+
+config OPT_LIB_FUNCTION
+ bool "Optimalized lib function"
+ default y
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ They are optimized by using word alignment. This will work
+ fine if both source and destination are aligned on the same
+ boundary. However, if they are aligned on different boundaries
+ shifts will be necessary. This might result in bad performance
+ on MicroBlaze systems without a barrel shifter.
+
+config OPT_LIB_ASM
+ bool "Optimalized lib function ASM"
+ depends on OPT_LIB_FUNCTION
+ default n
+ help
+ Allows turn on optimalized library function (memcpy and memmove).
+ Function are written in asm code.
+
+# This is still a bit broken - disabling for now JW 20070504
+config ALLOW_EDIT_AUTO
+ bool "Permit Display/edit of Kconfig.auto platform settings"
+ default n
+ help
+ Allows the editing of auto-generated platform settings from
+ the Kconfig.auto file. Obviously this does not change the
+ underlying hardware, so be very careful if you go editing
+ these settings.
+
+ Also, if you enable this, and edit various Kconfig.auto
+ settings, YOUR CHANGES WILL BE LOST if you then disable it
+ again. You have been warned!
+
+ If unsure, say no.
+
+comment "Automatic platform settings from Kconfig.auto"
+ depends on ALLOW_EDIT_AUTO
+
+if PLATFORM_GENERIC=y
+ source "arch/microblaze/platform/generic/Kconfig.auto"
+endif
+
+endmenu
--- /dev/null
+#
+# Makefile for arch/microblaze/platform directory
+#
+#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
+
+obj-y += platform.o
--- /dev/null
+#
+# (C) Copyright 2007 Michal Simek
+#
+# Michal SIMEK <monstr@monstr.eu>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+ depends on ALLOW_EDIT_AUTO
+
+config KERNEL_BASE_ADDR
+ hex "Physical address where Linux Kernel is"
+ default "0x90000000"
+ help
+ BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+ string "Targetted FPGA family" if ALLOW_EDIT_AUTO
+ default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+ int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+ int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_BARREL
+ int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_DIV
+ int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO
+ default 1
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+ int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO
+ default 2
+
+config XILINX_MICROBLAZE0_USE_FPU
+ int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO
+ default 2
+
+config XILINX_MICROBLAZE0_HW_VER
+ string "Core version number" if ALLOW_EDIT_AUTO
+ default 7.10.d
--- /dev/null
+#
+# Empty Makefile to keep make clean happy
+#
--- /dev/null
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,microblaze";
+ model = "testing";
+ DDR2_SDRAM: memory@90000000 {
+ device_type = "memory";
+ reg = < 0x90000000 0x10000000 >;
+ } ;
+ chosen {
+ bootargs = "console=ttyUL0,115200 highres=on";
+ linux,stdout-path = "/plb@0/serial@84000000";
+ } ;
+ cpus {
+ #address-cells = <1>;
+ #cpus = <0x1>;
+ #size-cells = <0>;
+ microblaze_0: cpu@0 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,microblaze-7.10.d";
+ d-cache-baseaddr = <0x90000000>;
+ d-cache-highaddr = <0x9fffffff>;
+ d-cache-line-size = <0x10>;
+ d-cache-size = <0x2000>;
+ device_type = "cpu";
+ i-cache-baseaddr = <0x90000000>;
+ i-cache-highaddr = <0x9fffffff>;
+ i-cache-line-size = <0x10>;
+ i-cache-size = <0x2000>;
+ model = "microblaze,7.10.d";
+ reg = <0>;
+ timebase-frequency = <125000000>;
+ xlnx,addr-tag-bits = <0xf>;
+ xlnx,allow-dcache-wr = <0x1>;
+ xlnx,allow-icache-wr = <0x1>;
+ xlnx,area-optimized = <0x0>;
+ xlnx,cache-byte-size = <0x2000>;
+ xlnx,d-lmb = <0x1>;
+ xlnx,d-opb = <0x0>;
+ xlnx,d-plb = <0x1>;
+ xlnx,data-size = <0x20>;
+ xlnx,dcache-addr-tag = <0xf>;
+ xlnx,dcache-always-used = <0x1>;
+ xlnx,dcache-byte-size = <0x2000>;
+ xlnx,dcache-line-len = <0x4>;
+ xlnx,dcache-use-fsl = <0x1>;
+ xlnx,debug-enabled = <0x1>;
+ xlnx,div-zero-exception = <0x1>;
+ xlnx,dopb-bus-exception = <0x0>;
+ xlnx,dynamic-bus-sizing = <0x1>;
+ xlnx,edge-is-positive = <0x1>;
+ xlnx,family = "virtex5";
+ xlnx,fpu-exception = <0x1>;
+ xlnx,fsl-data-size = <0x20>;
+ xlnx,fsl-exception = <0x0>;
+ xlnx,fsl-links = <0x0>;
+ xlnx,i-lmb = <0x1>;
+ xlnx,i-opb = <0x0>;
+ xlnx,i-plb = <0x1>;
+ xlnx,icache-always-used = <0x1>;
+ xlnx,icache-line-len = <0x4>;
+ xlnx,icache-use-fsl = <0x1>;
+ xlnx,ill-opcode-exception = <0x1>;
+ xlnx,instance = "microblaze_0";
+ xlnx,interconnect = <0x1>;
+ xlnx,interrupt-is-edge = <0x0>;
+ xlnx,iopb-bus-exception = <0x0>;
+ xlnx,mmu-dtlb-size = <0x4>;
+ xlnx,mmu-itlb-size = <0x2>;
+ xlnx,mmu-tlb-access = <0x3>;
+ xlnx,mmu-zones = <0x10>;
+ xlnx,number-of-pc-brk = <0x1>;
+ xlnx,number-of-rd-addr-brk = <0x0>;
+ xlnx,number-of-wr-addr-brk = <0x0>;
+ xlnx,opcode-0x0-illegal = <0x1>;
+ xlnx,pvr = <0x2>;
+ xlnx,pvr-user1 = <0x0>;
+ xlnx,pvr-user2 = <0x0>;
+ xlnx,reset-msr = <0x0>;
+ xlnx,sco = <0x0>;
+ xlnx,unaligned-exceptions = <0x1>;
+ xlnx,use-barrel = <0x1>;
+ xlnx,use-dcache = <0x1>;
+ xlnx,use-div = <0x1>;
+ xlnx,use-ext-brk = <0x1>;
+ xlnx,use-ext-nm-brk = <0x1>;
+ xlnx,use-extended-fsl-instr = <0x0>;
+ xlnx,use-fpu = <0x2>;
+ xlnx,use-hw-mul = <0x2>;
+ xlnx,use-icache = <0x1>;
+ xlnx,use-interrupt = <0x1>;
+ xlnx,use-mmu = <0x3>;
+ xlnx,use-msr-instr = <0x1>;
+ xlnx,use-pcmp-instr = <0x1>;
+ } ;
+ } ;
+ mb_plb: plb@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,plb-v46-1.03.a", "simple-bus";
+ ranges ;
+ FLASH: flash@a0000000 {
+ bank-width = <2>;
+ compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+ reg = < 0xa0000000 0x2000000 >;
+ xlnx,family = "virtex5";
+ xlnx,include-datawidth-matching-0 = <0x1>;
+ xlnx,include-datawidth-matching-1 = <0x0>;
+ xlnx,include-datawidth-matching-2 = <0x0>;
+ xlnx,include-datawidth-matching-3 = <0x0>;
+ xlnx,include-negedge-ioregs = <0x0>;
+ xlnx,include-plb-ipif = <0x1>;
+ xlnx,include-wrbuf = <0x1>;
+ xlnx,max-mem-width = <0x10>;
+ xlnx,mch-native-dwidth = <0x20>;
+ xlnx,mch-plb-clk-period-ps = <0x1f40>;
+ xlnx,mch-splb-awidth = <0x20>;
+ xlnx,mch0-accessbuf-depth = <0x10>;
+ xlnx,mch0-protocol = <0x0>;
+ xlnx,mch0-rddatabuf-depth = <0x10>;
+ xlnx,mch1-accessbuf-depth = <0x10>;
+ xlnx,mch1-protocol = <0x0>;
+ xlnx,mch1-rddatabuf-depth = <0x10>;
+ xlnx,mch2-accessbuf-depth = <0x10>;
+ xlnx,mch2-protocol = <0x0>;
+ xlnx,mch2-rddatabuf-depth = <0x10>;
+ xlnx,mch3-accessbuf-depth = <0x10>;
+ xlnx,mch3-protocol = <0x0>;
+ xlnx,mch3-rddatabuf-depth = <0x10>;
+ xlnx,mem0-width = <0x10>;
+ xlnx,mem1-width = <0x20>;
+ xlnx,mem2-width = <0x20>;
+ xlnx,mem3-width = <0x20>;
+ xlnx,num-banks-mem = <0x1>;
+ xlnx,num-channels = <0x0>;
+ xlnx,priority-mode = <0x0>;
+ xlnx,synch-mem-0 = <0x0>;
+ xlnx,synch-mem-1 = <0x0>;
+ xlnx,synch-mem-2 = <0x0>;
+ xlnx,synch-mem-3 = <0x0>;
+ xlnx,synch-pipedelay-0 = <0x2>;
+ xlnx,synch-pipedelay-1 = <0x2>;
+ xlnx,synch-pipedelay-2 = <0x2>;
+ xlnx,synch-pipedelay-3 = <0x2>;
+ xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+ xlnx,tavdv-ps-mem-1 = <0x3a98>;
+ xlnx,tavdv-ps-mem-2 = <0x3a98>;
+ xlnx,tavdv-ps-mem-3 = <0x3a98>;
+ xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+ xlnx,tcedv-ps-mem-1 = <0x3a98>;
+ xlnx,tcedv-ps-mem-2 = <0x3a98>;
+ xlnx,tcedv-ps-mem-3 = <0x3a98>;
+ xlnx,thzce-ps-mem-0 = <0x88b8>;
+ xlnx,thzce-ps-mem-1 = <0x1b58>;
+ xlnx,thzce-ps-mem-2 = <0x1b58>;
+ xlnx,thzce-ps-mem-3 = <0x1b58>;
+ xlnx,thzoe-ps-mem-0 = <0x1b58>;
+ xlnx,thzoe-ps-mem-1 = <0x1b58>;
+ xlnx,thzoe-ps-mem-2 = <0x1b58>;
+ xlnx,thzoe-ps-mem-3 = <0x1b58>;
+ xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+ xlnx,tlzwe-ps-mem-1 = <0x0>;
+ xlnx,tlzwe-ps-mem-2 = <0x0>;
+ xlnx,tlzwe-ps-mem-3 = <0x0>;
+ xlnx,twc-ps-mem-0 = <0x2af8>;
+ xlnx,twc-ps-mem-1 = <0x3a98>;
+ xlnx,twc-ps-mem-2 = <0x3a98>;
+ xlnx,twc-ps-mem-3 = <0x3a98>;
+ xlnx,twp-ps-mem-0 = <0x11170>;
+ xlnx,twp-ps-mem-1 = <0x2ee0>;
+ xlnx,twp-ps-mem-2 = <0x2ee0>;
+ xlnx,twp-ps-mem-3 = <0x2ee0>;
+ xlnx,xcl0-linesize = <0x4>;
+ xlnx,xcl0-writexfer = <0x1>;
+ xlnx,xcl1-linesize = <0x4>;
+ xlnx,xcl1-writexfer = <0x1>;
+ xlnx,xcl2-linesize = <0x4>;
+ xlnx,xcl2-writexfer = <0x1>;
+ xlnx,xcl3-linesize = <0x4>;
+ xlnx,xcl3-writexfer = <0x1>;
+ } ;
+ Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,compound";
+ ethernet@81c00000 {
+ compatible = "xlnx,xps-ll-temac-1.01.b";
+ device_type = "network";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 5 2 >;
+ llink-connected = <&PIM3>;
+ local-mac-address = [ 02 00 00 00 00 00 ];
+ reg = < 0x81c00000 0x40 >;
+ xlnx,bus2core-clk-ratio = <0x1>;
+ xlnx,phy-type = <0x1>;
+ xlnx,phyaddr = <0x1>;
+ xlnx,rxcsum = <0x0>;
+ xlnx,rxfifo = <0x1000>;
+ xlnx,temac-type = <0x0>;
+ xlnx,txcsum = <0x0>;
+ xlnx,txfifo = <0x1000>;
+ } ;
+ } ;
+ IIC_EEPROM: i2c@81600000 {
+ compatible = "xlnx,xps-iic-2.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 6 2 >;
+ reg = < 0x81600000 0x10000 >;
+ xlnx,clk-freq = <0x7735940>;
+ xlnx,family = "virtex5";
+ xlnx,gpo-width = <0x1>;
+ xlnx,iic-freq = <0x186a0>;
+ xlnx,scl-inertial-delay = <0x0>;
+ xlnx,sda-inertial-delay = <0x0>;
+ xlnx,ten-bit-adr = <0x0>;
+ } ;
+ LEDs_8Bit: gpio@81400000 {
+ compatible = "xlnx,xps-gpio-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 7 2 >;
+ reg = < 0x81400000 0x10000 >;
+ xlnx,all-inputs = <0x0>;
+ xlnx,all-inputs-2 = <0x0>;
+ xlnx,dout-default = <0x0>;
+ xlnx,dout-default-2 = <0x0>;
+ xlnx,family = "virtex5";
+ xlnx,gpio-width = <0x8>;
+ xlnx,interrupt-present = <0x1>;
+ xlnx,is-bidir = <0x1>;
+ xlnx,is-bidir-2 = <0x1>;
+ xlnx,is-dual = <0x0>;
+ xlnx,tri-default = <0xffffffff>;
+ xlnx,tri-default-2 = <0xffffffff>;
+ } ;
+ RS232_Uart_1: serial@84000000 {
+ clock-frequency = <125000000>;
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ current-speed = <115200>;
+ device_type = "serial";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 8 0 >;
+ port-number = <0>;
+ reg = < 0x84000000 0x10000 >;
+ xlnx,baudrate = <0x1c200>;
+ xlnx,data-bits = <0x8>;
+ xlnx,family = "virtex5";
+ xlnx,odd-parity = <0x0>;
+ xlnx,use-parity = <0x0>;
+ } ;
+ SysACE_CompactFlash: sysace@83600000 {
+ compatible = "xlnx,xps-sysace-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 4 2 >;
+ reg = < 0x83600000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,mem-width = <0x10>;
+ } ;
+ debug_module: debug@84400000 {
+ compatible = "xlnx,mdm-1.00.d";
+ reg = < 0x84400000 0x10000 >;
+ xlnx,family = "virtex5";
+ xlnx,interconnect = <0x1>;
+ xlnx,jtag-chain = <0x2>;
+ xlnx,mb-dbg-ports = <0x1>;
+ xlnx,uart-width = <0x8>;
+ xlnx,use-uart = <0x1>;
+ xlnx,write-fsl-ports = <0x0>;
+ } ;
+ mpmc@90000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "xlnx,mpmc-4.02.a";
+ PIM3: sdma@84600180 {
+ compatible = "xlnx,ll-dma-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 2 2 1 2 >;
+ reg = < 0x84600180 0x80 >;
+ } ;
+ } ;
+ xps_intc_0: interrupt-controller@81800000 {
+ #interrupt-cells = <0x2>;
+ compatible = "xlnx,xps-intc-1.00.a";
+ interrupt-controller ;
+ reg = < 0x81800000 0x10000 >;
+ xlnx,kind-of-intr = <0x100>;
+ xlnx,num-intr-inputs = <0x9>;
+ } ;
+ xps_timer_1: timer@83c00000 {
+ compatible = "xlnx,xps-timer-1.00.a";
+ interrupt-parent = <&xps_intc_0>;
+ interrupts = < 3 2 >;
+ reg = < 0x83c00000 0x10000 >;
+ xlnx,count-width = <0x20>;
+ xlnx,family = "virtex5";
+ xlnx,gen0-assert = <0x1>;
+ xlnx,gen1-assert = <0x1>;
+ xlnx,one-timer-only = <0x0>;
+ xlnx,trig0-assert = <0x1>;
+ xlnx,trig1-assert = <0x1>;
+ } ;
+ } ;
+} ;
--- /dev/null
+/*
+ * Copyright 2008 Michal Simek <monstr@monstr.eu>
+ *
+ * based on virtex.c file
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/prom.h>
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+ { .compatible = "simple-bus", },
+ { .compatible = "xlnx,plb-v46-1.00.a", },
+ { .compatible = "xlnx,opb-v20-1.10.c", },
+ { .compatible = "xlnx,opb-v20-1.10.b", },
+ { .compatible = "xlnx,compound", },
+ {}
+};
+
+static int __init microblaze_device_probe(void)
+{
+ of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+ return 0;
+}
+device_initcall(microblaze_device_probe);
select IRQ_CPU
select IRQ_GT641XX
select PCI_GT64XXX_PCI0
+ select PCI
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
board, which is based on GT64120 bridge chip.
config CAVIUM_OCTEON_SIMULATOR
- bool "Support for the Cavium Networks Octeon Simulator"
+ bool "Cavium Networks Octeon Simulator"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
hardware.
config CAVIUM_OCTEON_REFERENCE_BOARD
- bool "Support for the Cavium Networks Octeon reference board"
+ bool "Cavium Networks Octeon reference board"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
config PAGE_SIZE_8KB
bool "8kB"
- depends on EXPERIMENTAL && CPU_R8000
+ depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
help
Using 8kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
- only on the R8000 processor. Not that at the time of this writing
- this option is still high experimental; there are also issues with
- compatibility of user applications.
+ only on R8000 and cnMIPS processors. Note that you will need a
+ suitable Linux distribution to support this.
config PAGE_SIZE_16KB
bool "16kB"
all non-R3000 family processors. Note that you will need a suitable
Linux distribution to support this.
+config PAGE_SIZE_32KB
+ bool "32kB"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ Using 32kB page size will result in higher performance kernel at
+ the price of higher memory consumption. This option is available
+ only on cnMIPS cores. Note that you will need a suitable Linux
+ distribution to support this.
+
config PAGE_SIZE_64KB
bool "64kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
endmenu
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
config LOCKDEP_SUPPORT
bool
default y
KBUILD_DEFCONFIG := ip22_defconfig
-cflags-y := -ffunction-sections
-
#
# Select the object file format to substitute into the linker script.
#
endif
endif
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
#
ifdef CONFIG_SGI_IP28
- ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
- $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+ ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+ $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
endif
endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
extern int allow_au1k_wait; /* default off for CP0 Counter */
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
{
return au_readl(SYS_RTCREAD);
}
local_irq_restore(flags);
}
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
{
return read_c0_cvmcount();
}
}
#ifdef CONFIG_SMP
-static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
write_unlock(&octeon_irq_ciu0_rwlock);
+
+ return 0;
}
#endif
}
#ifdef CONFIG_SMP
-static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
write_unlock(&octeon_irq_ciu1_rwlock);
+
+ return 0;
}
#endif
int num;
if (BITS_PER_LONG == 32 &&
- __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__(
" .set push \n"
" .set mips32 \n"
{
int r;
- if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__("clz %0, %1" : "=r" (x) : "r" (x));
return 32 - x;
__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
__wsum sum, int *err_ptr)
{
- might_sleep();
+ might_fault();
return __csum_partial_copy_user((__force void *)src, dst,
len, sum, err_ptr);
}
__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
__wsum sum, int *err_ptr)
{
- might_sleep();
+ might_fault();
if (access_ok(VERIFY_WRITE, dst, len))
return __csum_partial_copy_user(src, (__force void *)dst,
len, sum, err_ptr);
/*
* Architecture specific compatibility types
*/
-#include <linux/seccomp.h>
#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
cpu_has_mips64r1 | cpu_has_mips64r2)
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz cpu_has_mips_r
+# endif
+
#ifndef cpu_has_dsp
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
#endif
#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */
struct cpuinfo_mips {
- unsigned long udelay_val;
- unsigned long asid_cache;
+ unsigned int udelay_val;
+ unsigned int asid_cache;
/*
* Capability and feature descriptor structure for MIPS CPU
#ifndef _ASM_DELAY_H
#define _ASM_DELAY_H
-#include <linux/param.h>
-#include <linux/smp.h>
+extern void __delay(unsigned int loops);
+extern void __ndelay(unsigned int ns);
+extern void __udelay(unsigned int us);
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
- if (sizeof(long) == 4)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " subu %0, 1 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops));
- else if (sizeof(long) == 8 && !DADDI_WAR)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " dsubu %0, 1 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops));
- else if (sizeof(long) == 8 && DADDI_WAR)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " dsubu %0, %2 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
- unsigned long hi, lo;
-
- /*
- * The rates of 128 is rounded wrongly by the catchall case
- * for 64-bit. Excessive precission? Probably ...
- */
-#if defined(CONFIG_64BIT) && (HZ == 128)
- usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
- usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
- usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
- 0x80000000ULL) >> 32);
-#endif
-
- if (sizeof(long) == 4)
- __asm__("multu\t%2, %3"
- : "=h" (usecs), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
- else if (sizeof(long) == 8 && !R4000_WAR)
- __asm__("dmultu\t%2, %3"
- : "=h" (usecs), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
- else if (sizeof(long) == 8 && R4000_WAR)
- __asm__("dmultu\t%3, %4\n\tmfhi\t%0"
- : "=r" (usecs), "=h" (hi), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
-
- __delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
+#define ndelay(ns) __udelay(ns)
+#define udelay(us) __udelay(us)
/* make sure "usecs *= ..." in udelay do not overflow. */
#if HZ >= 1000
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
-#include <linux/types.h>
+#include <asm-generic/div64.h>
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
-#include <asm/compiler.h>
+#include <linux/types.h>
/*
* No traps on overflows for any of these...
*/
-#define do_div64_32(res, high, low, base) ({ \
- unsigned long __quot32, __mod32; \
- unsigned long __cf, __tmp, __tmp2, __i; \
- \
- __asm__(".set push\n\t" \
- ".set noat\n\t" \
- ".set noreorder\n\t" \
- "move %2, $0\n\t" \
- "move %3, $0\n\t" \
- "b 1f\n\t" \
- " li %4, 0x21\n" \
- "0:\n\t" \
- "sll $1, %0, 0x1\n\t" \
- "srl %3, %0, 0x1f\n\t" \
- "or %0, $1, %5\n\t" \
- "sll %1, %1, 0x1\n\t" \
- "sll %2, %2, 0x1\n" \
- "1:\n\t" \
- "bnez %3, 2f\n\t" \
- " sltu %5, %0, %z6\n\t" \
- "bnez %5, 3f\n" \
- "2:\n\t" \
- " addiu %4, %4, -1\n\t" \
- "subu %0, %0, %z6\n\t" \
- "addiu %2, %2, 1\n" \
- "3:\n\t" \
- "bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
- ".set pop" \
- : "=&r" (__mod32), "=&r" (__tmp), \
- "=&r" (__quot32), "=&r" (__cf), \
- "=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (high), "1" (low)); \
- \
- (res) = __quot32; \
- __mod32; })
-
-#define do_div(n, base) ({ \
- unsigned long long __quot; \
- unsigned long __mod; \
- unsigned long long __div; \
- unsigned long __upper, __low, __high, __base; \
- \
- __div = (n); \
- __base = (base); \
- \
- __high = __div >> 32; \
- __low = __div; \
- __upper = __high; \
- \
- if (__high) \
- __asm__("divu $0, %z2, %z3" \
- : "=h" (__upper), "=l" (__high) \
- : "Jr" (__high), "Jr" (__base) \
- : GCC_REG_ACCUM); \
- \
- __mod = do_div64_32(__low, __upper, __low, __base); \
- \
- __quot = __high; \
- __quot = __quot << 32 | __low; \
- (n) = __quot; \
- __mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
- unsigned long __quot; \
- unsigned int __mod; \
- unsigned long __div; \
- unsigned int __base; \
- \
- __div = (n); \
- __base = (base); \
- \
- __mod = __div % __base; \
- __quot = __div / __base; \
- \
- (n) = __quot; \
- __mod; })
+#define __div64_32(n, base) \
+({ \
+ unsigned long __cf, __tmp, __tmp2, __i; \
+ unsigned long __quot32, __mod32; \
+ unsigned long __high, __low; \
+ unsigned long long __n; \
+ \
+ __high = *__n >> 32; \
+ __low = __n; \
+ __asm__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set noreorder \n" \
+ " move %2, $0 \n" \
+ " move %3, $0 \n" \
+ " b 1f \n" \
+ " li %4, 0x21 \n" \
+ "0: \n" \
+ " sll $1, %0, 0x1 \n" \
+ " srl %3, %0, 0x1f \n" \
+ " or %0, $1, %5 \n" \
+ " sll %1, %1, 0x1 \n" \
+ " sll %2, %2, 0x1 \n" \
+ "1: \n" \
+ " bnez %3, 2f \n" \
+ " sltu %5, %0, %z6 \n" \
+ " bnez %5, 3f \n" \
+ "2: \n" \
+ " addiu %4, %4, -1 \n" \
+ " subu %0, %0, %z6 \n" \
+ " addiu %2, %2, 1 \n" \
+ "3: \n" \
+ " bnez %4, 0b\n\t" \
+ " srl %5, %1, 0x1f\n\t" \
+ " .set pop" \
+ : "=&r" (__mod32), "=&r" (__tmp), \
+ "=&r" (__quot32), "=&r" (__cf), \
+ "=&r" (__i), "=&r" (__tmp2) \
+ : "Jr" (base), "0" (__high), "1" (__low)); \
+ \
+ (__n) = __quot32; \
+ __mod32; \
+})
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */
enum dma_data_direction direction);
extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+ size_t size, enum dma_data_direction direction)
+{
+ dma_unmap_single(dev, dma_address, size, direction);
+}
+
extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries, enum dma_data_direction direction);
extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
return __virt_to_fix(vaddr);
}
+#define kmap_get_fixmap_pte(vaddr) \
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
/*
* Called from pgtable_init()
*/
__instruction_hazard(); \
} while (0)
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
- defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+ defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+ defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
/* declarations for highmem.c */
extern unsigned long highstart_pfn, highend_pfn;
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
extern pte_t *pkmap_page_table;
/*
#define flush_cache_kmaps() flush_cache_all()
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
((nr) << _IOC_NRSHIFT) | \
((size) << _IOC_SIZESHIFT))
+#ifdef __KERNEL__
/* provoke compile error for invalid uses of size argument */
extern unsigned int __invalid_size_argument_for_IOC;
#define _IOC_TYPECHECK(t) \
((sizeof(t) == sizeof(t[1]) && \
sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
/* used to create numbers */
#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0)
#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
#include <linux/cpumask.h>
-extern void plat_set_irq_affinity(unsigned int irq,
+extern int plat_set_irq_affinity(unsigned int irq,
const struct cpumask *affinity);
extern void smtc_forward_irq(unsigned int irq);
#ifdef CONFIG_SOC_AU1100
enum soc_au1100_ints {
AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1100_UART0_INT,
+ AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
-
- AU1200_NAND_INT = AU1200_FIRST_INT + 23,
+ AU1200_GPIO_203,
+ AU1200_NAND_INT,
AU1200_GPIO_204,
AU1200_GPIO_205,
AU1200_GPIO_206,
#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
- spinlock_t lock; /* Used to block on state transitions */
- au1xxx_power_dev_t *dev; /* Power Managers device structure */
- unsigned stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
typedef struct {
u32 tx_dev_id, rx_dev_id, target_dev_id;
u32 tx_chan, rx_chan;
#endif
int irq;
u32 regbase;
-#ifdef CONFIG_PM
- pm_state pm;
-#endif
} _auide_hwif;
/******************************************************************************/
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * arch/mips/kernel/proc.c(show_cpuinfo),
+ * loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+
+#define cpu_has_32fpr 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_4kex 1
+#define cpu_has_64bits 1
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_counter 1
+#define cpu_has_dc_aliases 1
+#define cpu_has_divec 0
+#define cpu_has_dsp 0
+#define cpu_has_ejtag 0
+#define cpu_has_fpu 1
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_inclusive_pcaches 1
+#define cpu_has_llsc 1
+#define cpu_has_mcheck 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips16 0
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips3d 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mipsmt 0
+#define cpu_has_prefetch 0
+#define cpu_has_smartmips 0
+#define cpu_has_tlb 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_userlocal 0
+#define cpu_has_vce 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_watch 1
+#define cpu_icache_snoops_remote_store 1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
/* Compact Flash GPIO pin */
#define CF_GPIO_NUM 13
+/* S1 button GPIO (shared with UART0_SIN) */
+#define GPIO_BTN_S1 1
+
extern void rb532_gpio_set_ilevel(int bit, unsigned gpio);
extern void rb532_gpio_set_istat(int bit, unsigned gpio);
extern void rb532_gpio_set_func(unsigned gpio);
#else
#define PM_4K 0x00000000
+#define PM_8K 0x00002000
#define PM_16K 0x00006000
+#define PM_32K 0x0000e000
#define PM_64K 0x0001e000
+#define PM_128K 0x0003e000
#define PM_256K 0x0007e000
+#define PM_512K 0x000fe000
#define PM_1M 0x001fe000
+#define PM_2M 0x003fe000
#define PM_4M 0x007fe000
+#define PM_8M 0x00ffe000
#define PM_16M 0x01ffe000
+#define PM_32M 0x03ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
#define PM_1G 0x7fffe000
*/
#ifdef CONFIG_PAGE_SIZE_4KB
#define PM_DEFAULT_MASK PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK PM_8K
#elif defined(CONFIG_PAGE_SIZE_16KB)
#define PM_DEFAULT_MASK PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK PM_32K
#elif defined(CONFIG_PAGE_SIZE_64KB)
#define PM_DEFAULT_MASK PM_64K
#else
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
- "dsrl\t%M0, %M0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
else \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source ", " #sel "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
- "dsrl\t%M0, %M0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
local_irq_restore(__flags); \
set_c0_##name(unsigned int set) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
- res |= set; \
- write_c0_##name(res); \
+ new = res | set; \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
clear_c0_##name(unsigned int clear) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
- res &= ~clear; \
- write_c0_##name(res); \
+ new = res & ~clear; \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
} \
\
static inline unsigned int \
-change_c0_##name(unsigned int change, unsigned int new) \
+change_c0_##name(unsigned int change, unsigned int newbits) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
\
omt = __dmt(); \
res = read_c0_##name(); \
- res &= ~change; \
- res |= (new & change); \
- write_c0_##name(res); \
+ new = res & ~change; \
+ new |= (newbits & change); \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
#ifdef CONFIG_PAGE_SIZE_16KB
#define PAGE_SHIFT 14
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT 15
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PAGE_SHIFT 16
#endif
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size
-#define NMI_OFFSET(nasid, slice) \
+#define SN_NMI_OFFSET(nasid, slice) \
(KLD_NMI(nasid)->offset + \
KLD_NMI(nasid)->stride * (slice))
#define NMI_ADDR(nasid, slice) \
- TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+ TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
* Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
*/
#ifndef __ASM_SN_NMI_H
#define __ASM_SN_NMI_H
-#ident "$Revision: 1.5 $"
-
#include <asm/sn/addrs.h>
/*
#ifdef CONFIG_PAGE_SIZE_16KB
#define THREAD_SIZE_ORDER (0)
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define THREAD_SIZE_ORDER (0)
#endif
static inline int mips_clockevent_init(void)
{
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern int smtc_clockevent_init(void);
+
+ return smtc_clockevent_init();
+#elif defined(CONFIG_CEVT_R4K)
return r4k_clockevent_init();
#else
return -ENXIO;
#define __access_mask get_fs().seg
#define __access_ok(addr, size, mask) \
- (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+({ \
+ unsigned long __addr = (unsigned long) (addr); \
+ unsigned long __size = size; \
+ unsigned long __mask = mask; \
+ unsigned long __ok; \
+ \
+ __chk_user_ptr(addr); \
+ __ok = (signed long)(__mask & (__addr | (__addr + __size) | \
+ __ua_size(__size))); \
+ __ok == 0; \
+})
#define access_ok(type, addr, size) \
- likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+ likely(__access_ok((addr), (size), __access_mask))
/*
* put_user: - Write a simple value into user space.
({ \
int __gu_err; \
\
+ __chk_user_ptr(ptr); \
__get_user_common((x), size, ptr); \
__gu_err; \
})
int __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
\
+ might_fault(); \
if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
__get_user_common((x), size, __gu_ptr); \
\
__typeof__(*(ptr)) __pu_val; \
int __pu_err = 0; \
\
+ __chk_user_ptr(ptr); \
__pu_val = (x); \
switch (size) { \
case 1: __put_user_asm("sb", ptr); break; \
__typeof__(*(ptr)) __pu_val = (x); \
int __pu_err = -EFAULT; \
\
+ might_fault(); \
if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
switch (size) { \
case 1: __put_user_asm("sb", __pu_addr); break; \
const void *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ might_fault(); \
__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
__cu_len; \
})
const void *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \
+ if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \
+ might_fault(); \
__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
__cu_len; \
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \
+ if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
-#define __copy_in_user(to, from, n) __copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ might_fault(); \
+ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
#define copy_in_user(to, from, n) \
({ \
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \
- access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \
+ access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
{
__kernel_size_t res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, $0\n\t"
void __user * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && access_ok(VERIFY_WRITE, \
- ((unsigned long)(__cl_addr)), __cl_size)) \
+ __cl_addr, __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; \
})
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_user_nocheck_asm)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_user_asm)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
}
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
-static cycle_t txx9_cs_read(void)
+static cycle_t txx9_cs_read(struct clocksource *cs)
{
return __raw_readl(&txx9_cs_tmrptr->trr);
}
#include <asm/sibyte/sb1250.h>
-static cycle_t bcm1480_hpt_read(void)
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
{
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
}
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
-static cycle_t dec_ioasic_hpt_read(void)
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
{
return ioasic_read(IO_REG_FCTR);
}
while (!ds1287_timer_state())
;
- start = dec_ioasic_hpt_read();
+ start = dec_ioasic_hpt_read(&clocksource_dec);
while (i--)
while (!ds1287_timer_state())
;
- end = dec_ioasic_hpt_read();
+ end = dec_ioasic_hpt_read(&clocksource_dec);
freq = (end - start) * 10;
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
#include <asm/time.h>
-static cycle_t c0_hpt_read(void)
+static cycle_t c0_hpt_read(struct clocksource *cs)
{
return read_c0_count();
}
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
*/
-static cycle_t sb1250_hpt_read(void)
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
{
unsigned int count;
* to just read by itself. So use jiffies to emulate a free
* running counter:
*/
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
{
unsigned long flags;
int count;
static DEFINE_SPINLOCK(gic_lock);
-static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
cpumask_t tmp = CPU_MASK_NONE;
unsigned long flags;
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
- return;
+ return -1;
/* Assumption : cpumask refers to a single CPU */
spin_lock_irqsave(&gic_lock, flags);
cpumask_copy(irq_desc[irq].affinity, cpumask);
spin_unlock_irqrestore(&gic_lock, flags);
+ return 0;
}
#endif
seq_printf(m, fmt, __cpu_name[n],
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
- seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
+ seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
cpu_data[n].udelay_val / (500000/HZ),
(cpu_data[n].udelay_val / (5000/HZ)) % 100);
seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create
- PTR sys_timerfd_gettime /* 5285 */
- PTR sys_timerfd_settime
+ PTR compat_sys_timerfd_gettime /* 5285 */
+ PTR compat_sys_timerfd_settime
PTR sys_signalfd4
PTR sys_eventfd2
PTR sys_epoll_create1
PTR sys_eventfd
PTR sys32_fallocate /* 4320 */
PTR sys_timerfd_create
- PTR sys_timerfd_gettime
- PTR sys_timerfd_settime
+ PTR compat_sys_timerfd_gettime
+ PTR compat_sys_timerfd_settime
PTR compat_sys_signalfd4
PTR sys_eventfd2 /* 4325 */
PTR sys_epoll_create1
return;
die_if_kernel("Unhandled kernel unaligned access", regs);
- send_sig(SIGSEGV, current, 1);
+ force_sig(SIGSEGV, current);
return;
sigbus:
die_if_kernel("Unhandled kernel unaligned access", regs);
- send_sig(SIGBUS, current, 1);
+ force_sig(SIGBUS, current);
return;
sigill:
die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
- send_sig(SIGILL, current, 1);
+ force_sig(SIGILL, current);
}
asmlinkage void do_ade(struct pt_regs *regs)
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
- strncpy_user.o strnlen_user.o uncached.o
+lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+ strlen_user.o strncpy_user.o strnlen_user.o uncached.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+inline void __delay(unsigned int loops)
+{
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " subu %0, 1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+ unsigned int lpj = current_cpu_data.udelay_val;
+
+ __delay((us * 0x000010c7 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+ unsigned int lpj = current_cpu_data.udelay_val;
+
+ __delay((us * 0x00000005 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);
case PM_16K: return "16kb";
case PM_64K: return "64kb";
case PM_256K: return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+ case PM_8K: return "8kb";
+ case PM_32K: return "32kb";
+ case PM_128K: return "128kb";
+ case PM_512K: return "512kb";
+ case PM_2M: return "2Mb";
+ case PM_8M: return "8Mb";
+ case PM_32M: return "32Mb";
+#endif
#ifndef CONFIG_CPU_VR41XX
case PM_1M: return "1Mb";
case PM_4M: return "4Mb";
printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
icache_size >> 10,
- cpu_has_vtag_icache ? "VIVT" : "VIPT",
+ c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
way_string[c->icache.ways], c->icache.linesz);
printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
unsigned long addr;
addr = (unsigned long) page_address(page) + offset;
- dma_cache_wback_inv(addr, size);
+ __dma_sync(addr, size, direction);
}
return plat_map_dma_mem_page(dev, page) + offset;
EXPORT_SYMBOL(dma_map_page);
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-
- if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
- unsigned long addr;
-
- addr = dma_addr_to_virt(dma_address);
- dma_cache_wback_inv(addr, size);
- }
-
- plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
{
#include <linux/module.h>
#include <linux/highmem.h>
+#include <asm/fixmap.h>
#include <asm/tlbflush.h>
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
void *__kmap(struct page *page)
{
void *addr;
return addr;
}
+EXPORT_SYMBOL(__kmap);
void __kunmap(struct page *page)
{
return;
kunmap_high(page);
}
+EXPORT_SYMBOL(__kunmap);
/*
* kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte - idx)));
#endif
- set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+ set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
local_flush_tlb_one((unsigned long)vaddr);
return (void*) vaddr;
}
+EXPORT_SYMBOL(__kmap_atomic);
void __kunmap_atomic(void *kvaddr, enum km_type type)
{
pagefault_enable();
}
+EXPORT_SYMBOL(__kunmap_atomic);
/*
* This is the same as kmap_atomic() but can map memory that doesn't
debug_kmap_atomic(type);
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
flush_tlb_one(vaddr);
return (void*) vaddr;
return pte_page(*pte);
}
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+ unsigned long kmap_vstart;
+
+ /* cache the first kmap pte */
+ kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+ kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
return 1UL << order;
}
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr) \
- pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
#ifdef CONFIG_MIPS_MT_SMTC
static pte_t *kmap_coherent_pte;
static void __init kmap_coherent_init(void)
}
}
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
- unsigned long kmap_vstart;
-
- /* cache the first kmap pte */
- kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
- kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
- kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
#include <asm/r4kcache.h>
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
/*
* Writeback and invalidate the primary cache dcache before DMA.
clear_c0_config(RM7K_CONF_SE);
}
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
.bc_enable = rm7k_sc_enable,
.bc_disable = rm7k_sc_disable,
.bc_wback_inv = rm7k_sc_wback_inv,
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
+ unsigned long size, flags;
#ifdef DEBUG_TLB
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
#ifdef DEBUG_TLB
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
+ unsigned long size, flags;
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
/* Usable for KV1 addresses only! */
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
*/
-void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
{
cpumask_t tmask;
int cpu = 0;
/* Do any generic SMTC IRQ affinity setup */
smtc_set_irq_affinity(irq, tmask);
+
+ return 0;
}
#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
static unsigned long cpj;
-static cycle_t hpt_read(void)
+static cycle_t hpt_read(struct clocksource *cs)
{
return read_c0_count2();
}
endchoice
-menu "Options for PMC-Sierra MSP chipsets"
- depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
- bool "Root filesystem embedded in kernel image"
- select MTD
- select MTD_BLOCK
- select MTD_PMC_MSP_RAMROOT
- select MTD_RAM
-
-endmenu
-
config HYPERTRANSPORT
bool "Hypertransport Support for PMC-Sierra Yosemite"
depends on PMC_YOSEMITE
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
char *str;
unsigned int memsize;
unsigned int heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
- void *ramroot_start;
- unsigned long ramroot_size;
-#endif
int i;
str = prom_getenv(memsz_env);
i++; /* 3 */
mdesc[i].type = BOOT_MEM_RESERVED;
mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
- if (get_ramroot(&ramroot_start, &ramroot_size)) {
- /*
- * Rootfs in RAM -- follows kernel
- * Combine rootfs image with kernel block so a
- * page (4k) isn't wasted between memory blocks
- */
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
- (u32)ramroot_start + ramroot_size)) - mdesc[i].base;
- } else
-#endif
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
- (u32)_end)) - mdesc[i].base;
+ mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
/* Remainder of RAM -- under memsize */
i++; /* 5 */
return &mdesc[0];
}
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
- extern char _end[];
-
- /* Check for start following the end of the kernel */
- void *check_start = (void *)_end;
-
- /* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
- if (*(__u32 *)check_start == CRAMFS_MAGIC) {
- /* Get CRAMFS size */
- *start = check_start;
- *size = PAGE_ALIGN(((struct cramfs_super *)
- check_start)->size);
-
- return true;
- }
-#endif
-#ifdef CONFIG_SQUASHFS
- if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
- /* Get SQUASHFS size */
- *start = check_start;
- *size = PAGE_ALIGN(((struct squashfs_super_block *)
- check_start)->bytes_used);
-
- return true;
- }
-#endif
-
- return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif
#if defined(CONFIG_PMC_MSP7120_GW)
#include <msp_regops.h>
-#include <msp_gpio.h>
#define MSP_BOARD_RESET_GPIO 9
#endif
* as GPIO char driver may not be enabled and it would look up
* data inRAM!
*/
- set_value_reg32(GPIO_CFG3_REG,
- basic_mode_mask(MSP_BOARD_RESET_GPIO),
- basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
- set_reg32(GPIO_DATA3_REG,
- basic_data_mask(MSP_BOARD_RESET_GPIO));
+ set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+ set_reg32(GPIO_DATA3_REG, 8);
/*
* In case GPIO9 doesn't reset the board (jumper configurable!)
mips_hpt_frequency = cpu_rate/2;
}
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
{
-#ifdef CONFIG_IRQ_MSP_CIC
- /* we are using the vpe0 counter for timer interrupts */
- setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+ return MSP_INT_VPE0_TIMER;
}
.id = -1,
};
-static struct gpio_keys_button rb532_gpio_btn[] = {
- {
- .gpio = 1,
- .code = BTN_0,
- .desc = "S1",
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_platform_data rb532_gpio_btn_data = {
- .buttons = rb532_gpio_btn,
- .nbuttons = ARRAY_SIZE(rb532_gpio_btn),
-};
-
static struct platform_device rb532_button = {
- .name = "gpio-keys",
+ .name = "rb532-button",
.id = -1,
- .dev = {
- .platform_data = &rb532_gpio_btn_data,
- }
};
static struct resource rb532_wdt_res[] = {
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
/* Wait until interrupt goes away */
- disable_irq(SGI_PANEL_IRQ);
+ disable_irq_nosync(SGI_PANEL_IRQ);
init_timer(&debounce_timer);
debounce_timer.function = debounce;
debounce_timer.expires = jiffies + 5;
setup_irq(irq, &hub_rt_irqaction);
}
-static cycle_t hub_rt_read(void)
+static cycle_t hub_rt_read(struct clocksource *cs)
{
return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
}
#include <asm/ptrace.h>
#include <asm/tlbdebug.h>
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
{
int data = regs->cp0_cause & 4;
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
.handler = crime_memerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME memory error",
};
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME CPU error",
static void ip32_machine_power_off(void)
{
- volatile unsigned char reg_a, xctrl_a, xctrl_b;
+ unsigned char reg_a, xctrl_a, xctrl_b;
disable_irq(MACEISA_RTC_IRQ);
reg_a = CMOS_READ(RTC_REG_A);
static void debounce(unsigned long data)
{
- volatile unsigned char reg_a, reg_c, xctrl_a;
+ unsigned char reg_a, reg_c, xctrl_a;
reg_c = CMOS_READ(RTC_INTR_FLAGS);
+ reg_a = CMOS_READ(RTC_REG_A);
CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
wbflush();
xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
{
- volatile unsigned char reg_c;
+ unsigned char reg_c;
reg_c = CMOS_READ(RTC_INTR_FLAGS);
if (!(reg_c & RTC_IRQF)) {
"%s: RTC IRQ without RTC_IRQF\n", __func__);
}
/* Wait until interrupt goes away */
- disable_irq(MACEISA_RTC_IRQ);
+ disable_irq_nosync(MACEISA_RTC_IRQ);
init_timer(&debounce_timer);
debounce_timer.function = debounce;
debounce_timer.expires = jiffies + 50;
static void disable_bcm1480_irq(unsigned int irq);
static void ack_bcm1480_irq(unsigned int irq);
#ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
#endif
#ifdef CONFIG_PCI
}
#ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
{
int i = 0, old_cpu, cpu, int_on, k;
u64 cur_ints;
- struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
unsigned int irq_dirty;
if (cpumask_weight(mask) != 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
- return;
+ return -1;
}
i = cpumask_first(mask);
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&desc->lock, flags);
- spin_lock(&bcm1480_imr_lock);
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = bcm1480_irq_owner[irq];
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
}
}
- spin_unlock(&bcm1480_imr_lock);
- spin_unlock_irqrestore(&desc->lock, flags);
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+
+ return 0;
}
#endif
*/
cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
- if (argc < 0) {
- /*
- * It's OK for direct boot to not provide a
- * command line
- */
- strcpy(arcs_cmdline, "root=/dev/ram0 ");
- } else {
+ if (argc >= 0) {
/* The loader should have set the command line */
/* too early for panic to do any good */
printk("LINUX_CMDLINE not defined in cfe.");
static void disable_sb1250_irq(unsigned int irq);
static void ack_sb1250_irq(unsigned int irq);
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
#endif
#ifdef CONFIG_SIBYTE_HAS_LDT
}
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
- struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
i = cpumask_first(mask);
if (cpumask_weight(mask) > 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
- return;
+ return -1;
}
/* Convert logical CPU to physical CPU */
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&desc->lock, flags);
- spin_lock(&sb1250_imr_lock);
+ spin_lock_irqsave(&sb1250_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = sb1250_irq_owner[irq];
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
}
- spin_unlock(&sb1250_imr_lock);
- spin_unlock_irqrestore(&desc->lock, flags);
+ spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+
+ return 0;
}
#endif
{
int i;
__u32 divmode;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
u64 ccfg;
txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
{
int i;
__u32 divmode;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
u64 ccfg;
txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
int i;
__u32 divmode;
__u64 pcfg;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
TX4939_REG_SIZE);
}
struct txx9_board_vec rbtx4939_vec __initdata = {
- .system = "Tothiba RBTX4939",
+ .system = "Toshiba RBTX4939",
.prom_init = rbtx4939_prom_init,
.mem_setup = rbtx4939_setup,
.irq_setup = rbtx4939_irq_setup,
source "crypto/Kconfig"
source "lib/Kconfig"
-
-source "arch/mn10300/oprofile/Kconfig"
KBUILD_AFLAGS += -Wa,--gdwarf2
endif
-###################################################################################################
#
-# juggle some symlinks in the MN10300 asm include dir
+# include the appropriate processor- and unit-specific headers
#
-# Update machine proc and unit symlinks if something which affects
-# them changed. We use .proc / .unit to indicate when they were
-# updated last, otherwise make uses the target directory mtime.
-#
-###################################################################################################
-
-# processor specific definitions
-include/asm-mn10300/.proc: $(wildcard include/config/proc/*.h) include/config/auto.conf
- @echo ' SYMLINK include/asm-mn10300/proc -> include/asm-mn10300/proc-$(PROCESSOR)'
-ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p include/asm-mn10300
- $(Q)ln -fsn $(srctree)/include/asm-mn10300/proc-$(PROCESSOR) include/asm-mn10300/proc
-else
- $(Q)ln -fsn proc-$(PROCESSOR) include/asm-mn10300/proc
-endif
- @touch $@
-
-CLEAN_FILES += include/asm-mn10300/proc include/asm-mn10300/.proc
-
-prepare: include/asm-mn10300/.proc
-
-# unit specific definitions
-include/asm-mn10300/.unit: $(wildcard include/config/unit/*.h) include/config/auto.conf
- @echo ' SYMLINK include/asm-mn10300/unit -> include/asm-mn10300/unit-$(UNIT)'
-ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p include/asm-mn10300
- $(Q)ln -fsn $(srctree)/include/asm-mn10300/unit-$(UNIT) include/asm-mn10300/unit
-else
- $(Q)ln -fsn unit-$(UNIT) include/asm-mn10300/unit
-endif
- @touch $@
-
-CLEAN_FILES += include/asm-mn10300/unit include/asm-mn10300/.unit
-
-prepare: include/asm-mn10300/.unit
+KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/proc-$(PROCESSOR)/include
+KBUILD_CPPFLAGS += -I$(srctree)/arch/mn10300/unit-$(UNIT)/include
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Tue Feb 19 18:52:24 2008
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 11:13:22 2009
#
CONFIG_MN10300=y
CONFIG_AM33=y
CONFIG_GENERIC_BUG=y
CONFIG_QUICKLIST=y
CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_SUPPORTS_AOUT is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HZ=1000
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
#
# Matsushita MN10300 system setup
CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
CONFIG_MN10300_CURRENT_IN_E2=y
CONFIG_MN10300_USING_JTAG=y
CONFIG_MN10300_RTC=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# Power management options
# Executable formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
#
# SCSI device support
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Profiling support
-#
+CONFIG_NLATTR=y
--- /dev/null
+include include/asm-generic/Kbuild.asm
--- /dev/null
+/* MN10300 Atomic counter operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ATOMIC_H
+#define _ASM_ATOMIC_H
+
+#ifdef CONFIG_SMP
+#error not SMP safe
+#endif
+
+/*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+#define ATOMIC_INIT(i) { (i) }
+
+#ifdef __KERNEL__
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v. Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_read(v) ((v)->counter)
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i. Note that the guaranteed
+ * useful range of an atomic_t is only 24 bits.
+ */
+#define atomic_set(v, i) (((v)->counter) = (i))
+
+#include <asm/system.h>
+
+/**
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ local_irq_save(flags);
+ temp = v->counter;
+ temp += i;
+ v->counter = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+/**
+ * atomic_sub_return - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns the result
+ * Note that the guaranteed useful range of an atomic_t is only 24 bits.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+ unsigned long flags;
+ int temp;
+
+ local_irq_save(flags);
+ temp = v->counter;
+ temp -= i;
+ v->counter = temp;
+ local_irq_restore(flags);
+
+ return temp;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+ return atomic_add_return(i, v) < 0;
+}
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+ atomic_add_return(i, v);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ atomic_sub_return(i, v);
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+ atomic_add_return(1, v);
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+ atomic_sub_return(1, v);
+}
+
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
+
+#define atomic_add_unless(v, a, u) \
+({ \
+ int c, old; \
+ c = atomic_read(v); \
+ while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
+ c = old; \
+ c != (u); \
+})
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+ unsigned long flags;
+
+ mask = ~mask;
+ local_irq_save(flags);
+ *addr &= mask;
+ local_irq_restore(flags);
+}
+
+#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
+
+/* Atomic operations are already serializing on MN10300??? */
+#define smp_mb__before_atomic_dec() barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc() barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ATOMIC_H */
--- /dev/null
+#ifndef _ASM_AUXVEC_H
+#define _ASM_AUXVEC_H
+
+#endif
--- /dev/null
+/* MN10300 bit operations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ * These have to be done with inline assembly: that way the bit-setting
+ * is guaranteed to be atomic. All bit operations return 0 if the bit
+ * was cleared before the operation and != 0 if it was not.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+#ifndef __ASM_BITOPS_H
+#define __ASM_BITOPS_H
+
+#include <asm/cpu-regs.h>
+
+#define smp_mb__before_clear_bit() barrier()
+#define smp_mb__after_clear_bit() barrier()
+
+/*
+ * set bit
+ */
+#define __set_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bset %2,(%1) # set_bit reg" \
+ : "=m"(*_a) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+})
+
+#define set_bit(nr, addr) __set_bit((nr), (addr))
+
+/*
+ * clear bit
+ */
+#define ___clear_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bclr %2,(%1) # clear_bit reg" \
+ : "=m"(*_a) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+})
+
+#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
+
+
+static inline void __clear_bit(int nr, volatile void *addr)
+{
+ unsigned int *a = (unsigned int *) addr;
+ int mask;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a &= ~mask;
+}
+
+/*
+ * test bit
+ */
+static inline int test_bit(int nr, const volatile void *addr)
+{
+ return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/*
+ * change bit
+ */
+static inline void __change_bit(int nr, volatile void *addr)
+{
+ int mask;
+ unsigned int *a = (unsigned int *) addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ *a ^= mask;
+}
+
+extern void change_bit(int nr, volatile void *addr);
+
+/*
+ * test and set bit
+ */
+#define __test_and_set_bit(nr,addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ unsigned epsw; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bset %3,(%2) # test_set_bit reg\n" \
+ "mov epsw,%1" \
+ : "=m"(*_a), "=d"(epsw) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+ \
+ !(epsw & EPSW_FLAG_Z); \
+})
+
+#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
+
+/*
+ * test and clear bit
+ */
+#define __test_and_clear_bit(nr, addr) \
+({ \
+ volatile unsigned char *_a = (unsigned char *)(addr); \
+ const unsigned shift = (nr) & 7; \
+ unsigned epsw; \
+ _a += (nr) >> 3; \
+ \
+ asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \
+ "mov epsw,%1" \
+ : "=m"(*_a), "=d"(epsw) \
+ : "a"(_a), "d"(1 << shift), "m"(*_a) \
+ : "memory", "cc"); \
+ \
+ !(epsw & EPSW_FLAG_Z); \
+})
+
+#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
+
+/*
+ * test and change bit
+ */
+static inline int __test_and_change_bit(int nr, volatile void *addr)
+{
+ int mask, retval;
+ unsigned int *a = (unsigned int *)addr;
+
+ a += nr >> 5;
+ mask = 1 << (nr & 0x1f);
+ retval = (mask & *a) != 0;
+ *a ^= mask;
+
+ return retval;
+}
+
+extern int test_and_change_bit(int nr, volatile void *addr);
+
+#include <asm-generic/bitops/lock.h>
+
+#ifdef __KERNEL__
+
+/**
+ * __ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 31..0 to indicate bit 31..0 most least significant bit set
+ * - if no bits are set in x, the result is undefined
+ */
+static inline __attribute__((const))
+unsigned long __ffs(unsigned long x)
+{
+ int bit;
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
+ return bit;
+}
+
+/*
+ * special slimline version of fls() for calculating ilog2_u32()
+ * - note: no protection against n == 0
+ */
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+ int bit;
+ asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
+ return bit;
+}
+
+/**
+ * fls - find last bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as ffs:
+ * - return 32..1 to indicate bit 31..0 most significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int fls(int x)
+{
+ return (x != 0) ? __ilog2_u32(x) + 1 : 0;
+}
+
+/**
+ * __fls - find last (most-significant) set bit in a long word
+ * @word: the word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+ return __ilog2_u32(word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * - return 32..1 to indicate bit 31..0 most least significant bit set
+ * - return 0 to indicate no bits set
+ */
+static inline __attribute__((const))
+int ffs(int x)
+{
+ /* Note: (x & -x) gives us a mask that is the least significant
+ * (rightmost) 1-bit of the value in x.
+ */
+ return fls(x & -x);
+}
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+ test_and_set_bit((nr) ^ 0x18, (addr))
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+ test_and_clear_bit((nr) ^ 0x18, (addr))
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_BITOPS_H */
--- /dev/null
+/* MN10300 Kernel bug reporting
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUG_H
+#define _ASM_BUG_H
+
+#ifdef CONFIG_BUG
+
+/*
+ * Tell the user there is some problem.
+ */
+#define BUG() \
+do { \
+ asm volatile( \
+ " syscall 15 \n" \
+ "0: \n" \
+ " .section __bug_table,\"a\" \n" \
+ " .long 0b,%0,%1 \n" \
+ " .previous \n" \
+ : \
+ : "i"(__FILE__), "i"(__LINE__) \
+ ); \
+} while (1)
+
+#define HAVE_ARCH_BUG
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_BUG_H */
--- /dev/null
+/* MN10300 Checks for architecture-dependent bugs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_BUGS_H
+#define _ASM_BUGS_H
+
+#include <asm/processor.h>
+
+static inline void __init check_bugs(void)
+{
+}
+
+#endif /* _ASM_BUGS_H */
--- /dev/null
+/* AM33v2 on-board bus controller registers
+ *
+ * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_BUSCTL_REGS_H
+#define _ASM_BUSCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* bus controller registers */
+#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */
+#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */
+#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */
+#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */
+#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */
+#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */
+#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */
+#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */
+#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */
+#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */
+#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */
+#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */
+#define BCCR_API 0x00070000 /* bus arbitration priority */
+#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */
+#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */
+#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */
+#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */
+#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */
+#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */
+#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */
+#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */
+#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */
+#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */
+#define BCCR_TMON 0x03000000 /* timeout value settings */
+#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */
+#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */
+#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */
+#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */
+#define BCCR_TMOE 0x10000000 /* timeout detection enable */
+
+#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */
+#define BCBERR_BESB 0x0000001f /* erroneous access destination space */
+#define BCBERR_BESB_MON 0x00000001 /* - monitor space */
+#define BCBERR_BESB_IO 0x00000002 /* - IO bus */
+#define BCBERR_BESB_EX 0x00000004 /* - EX bus */
+#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */
+#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */
+#define BCBERR_BERW 0x00000100 /* type of access */
+#define BCBERR_BERW_WRITE 0x00000000 /* - write */
+#define BCBERR_BERW_READ 0x00000100 /* - read */
+#define BCBERR_BESD 0x00000200 /* error detector */
+#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */
+#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */
+#define BCBERR_BEBST 0x00000400 /* type of access */
+#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */
+#define BCBERR_BEBST_BURST 0x00000400 /* - burst */
+#define BCBERR_BEME 0x00000800 /* multiple bus error flag */
+#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */
+#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */
+#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */
+#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */
+#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */
+
+#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */
+
+/* system bus controller registers */
+#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */
+#define SBBASE_BE 0x00000001 /* bank enable */
+#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */
+#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */
+
+#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */
+#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */
+#define SBCNTRL0_REH 0x0000f000 /* read enable hold */
+#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */
+#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */
+#define SBCNTRL0_DAH 0x0f000000 /* data hold */
+#define SBCNTRL0_ADH 0xf0000000 /* address hold */
+
+#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */
+#define SBCNTRL1_WED 0x00000f00 /* write enable delay */
+#define SBCNTRL1_RED 0x0000f000 /* read enable delay */
+#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */
+#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */
+#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */
+#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */
+
+#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */
+#define SBCNTRL2_WC 0x000000ff /* wait count */
+#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */
+#define SBCNTRL2_WM 0x01000000 /* wait mode setting */
+#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */
+#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */
+#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */
+#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */
+#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */
+#define SBCNTRL2_BW 0x04000000 /* bus width */
+#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */
+#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */
+#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */
+#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */
+#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */
+#define SBCNTRL2_BT 0x70000000 /* bus type setting */
+#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */
+#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */
+#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */
+#define SBCNTRL2_BTSE 0x80000000 /* burst enable */
+
+/* memory bus controller */
+#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */
+#define SDBASE_CE 0x00000001 /* chip enable */
+#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */
+#define SDBASE_CBAM_SHIFT 16
+#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */
+
+#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */
+#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */
+#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */
+#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */
+#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */
+#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */
+#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */
+#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */
+#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */
+#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */
+#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */
+#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */
+#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */
+#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */
+#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */
+#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */
+#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */
+
+#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */
+#define SDREFCNT_PERI 0x00000fff /* refresh period */
+
+#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_BUSCTL_REGS_H */
--- /dev/null
+#ifndef _ASM_BYTEORDER_H
+#define _ASM_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_BYTEORDER_H */
--- /dev/null
+/* MN10300 cache management registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_CACHE_H
+#define _ASM_CACHE_H
+
+#include <asm/cpu-regs.h>
+#include <proc/cache.h>
+
+#ifndef __ASSEMBLY__
+#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
+#else
+#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES
+#endif
+
+/* data cache purge registers
+ * - read from the register to unconditionally purge that cache line
+ * - write address & 0xffffff00 to conditionally purge that cache line
+ * - clear LSB to request invalidation as well
+ */
+#define DCACHE_PURGE(WAY, ENTRY) \
+ __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
+ (ENTRY) * L1_CACHE_BYTES, u32)
+
+#define DCACHE_PURGE_WAY0(ENTRY) \
+ __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY1(ENTRY) \
+ __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY2(ENTRY) \
+ __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+#define DCACHE_PURGE_WAY3(ENTRY) \
+ __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
+
+/* instruction cache access registers */
+#define ICACHE_DATA(WAY, ENTRY, OFF) \
+ __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define ICACHE_TAG(WAY, ENTRY) \
+ __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+/* instruction cache access registers */
+#define DCACHE_DATA(WAY, ENTRY, OFF) \
+ __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
+#define DCACHE_TAG(WAY, ENTRY) \
+ __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
+
+#endif /* _ASM_CACHE_H */
--- /dev/null
+/* MN10300 Cache flushing
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CACHEFLUSH_H
+#define _ASM_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+
+/*
+ * virtually-indexed cache managment (our cache is physically indexed)
+ */
+#define flush_cache_all() do {} while (0)
+#define flush_cache_mm(mm) do {} while (0)
+#define flush_cache_dup_mm(mm) do {} while (0)
+#define flush_cache_range(mm, start, end) do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
+#define flush_cache_vmap(start, end) do {} while (0)
+#define flush_cache_vunmap(start, end) do {} while (0)
+#define flush_dcache_page(page) do {} while (0)
+#define flush_dcache_mmap_lock(mapping) do {} while (0)
+#define flush_dcache_mmap_unlock(mapping) do {} while (0)
+
+/*
+ * physically-indexed cache managment
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
+
+#else
+
+#define flush_icache_range(start, end) do {} while (0)
+#define flush_icache_page(vma, pg) do {} while (0)
+
+#endif
+
+#define flush_icache_user_range(vma, pg, adr, len) \
+ flush_icache_range(adr, adr + len)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+ do { \
+ memcpy(dst, src, len); \
+ flush_icache_page(vma, page); \
+ } while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+/*
+ * primitive routines
+ */
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern void mn10300_icache_inv(void);
+extern void mn10300_dcache_inv(void);
+extern void mn10300_dcache_inv_page(unsigned start);
+extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
+#ifdef CONFIG_MN10300_CACHE_WBACK
+extern void mn10300_dcache_flush(void);
+extern void mn10300_dcache_flush_page(unsigned start);
+extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
+extern void mn10300_dcache_flush_inv(void);
+extern void mn10300_dcache_flush_inv_page(unsigned start);
+extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
+extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
+#else
+#define mn10300_dcache_flush() do {} while (0)
+#define mn10300_dcache_flush_page(start) do {} while (0)
+#define mn10300_dcache_flush_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush_inv() mn10300_dcache_inv()
+#define mn10300_dcache_flush_inv_page(start) \
+ mn10300_dcache_inv_page((start))
+#define mn10300_dcache_flush_inv_range(start, end) \
+ mn10300_dcache_inv_range((start), (end))
+#define mn10300_dcache_flush_inv_range2(start, size) \
+ mn10300_dcache_inv_range2((start), (size))
+#endif /* CONFIG_MN10300_CACHE_WBACK */
+#else
+#define mn10300_icache_inv() do {} while (0)
+#define mn10300_dcache_inv() do {} while (0)
+#define mn10300_dcache_inv_page(start) do {} while (0)
+#define mn10300_dcache_inv_range(start, end) do {} while (0)
+#define mn10300_dcache_inv_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush() do {} while (0)
+#define mn10300_dcache_flush_inv_page(start) do {} while (0)
+#define mn10300_dcache_flush_inv() do {} while (0)
+#define mn10300_dcache_flush_inv_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0)
+#define mn10300_dcache_flush_page(start) do {} while (0)
+#define mn10300_dcache_flush_range(start, end) do {} while (0)
+#define mn10300_dcache_flush_range2(start, size) do {} while (0)
+#endif /* CONFIG_MN10300_CACHE_DISABLED */
+
+/*
+ * internal debugging function
+ */
+#ifdef CONFIG_DEBUG_PAGEALLOC
+extern void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_CACHEFLUSH_H */
--- /dev/null
+/* MN10300 Optimised checksumming code
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CHECKSUM_H
+#define _ASM_CHECKSUM_H
+
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+ int len, __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
+ int len, __wsum sum,
+ int *err_ptr);
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define csum_partial_copy_fromuser csum_partial_copy
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+ __wsum sum);
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+ asm(
+ " add %1,%0 \n"
+ " addc 0xffff,%0 \n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum & 0xffff0000)
+ : "cc"
+ );
+ return (~sum) >> 16;
+}
+
+static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ __wsum tmp;
+
+ tmp = (__wsum) ntohs(len) << 16;
+ tmp += (__wsum) proto << 8;
+
+ asm(
+ " add %1,%0 \n"
+ " addc %2,%0 \n"
+ " addc %3,%0 \n"
+ " addc 0,%0 \n"
+ : "=r" (sum)
+ : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
+ : "cc"
+ );
+ return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
+ unsigned long daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#undef _HAVE_ARCH_IPV6_CSUM
+
+/*
+ * Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
+ __wsum sum, int *err_ptr);
+
+
+#endif /* _ASM_CHECKSUM_H */
--- /dev/null
+/* MN10300 Core system registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CPU_REGS_H
+#define _ASM_CPU_REGS_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+#endif
+
+#ifdef CONFIG_MN10300_CPU_AM33V2
+/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
+ * the FP regs, but tell the assembler that we're actually allowed AM33v2
+ * instructions */
+#ifndef __ASSEMBLY__
+asm(" .am33_2\n");
+#else
+.am33_2
+#endif
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
+#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
+#else
+#define __SYSREG(ADDR, TYPE) ADDR
+#define __SYSREGC(ADDR, TYPE) ADDR
+#endif
+
+/* CPU registers */
+#define EPSW_FLAG_Z 0x00000001 /* zero flag */
+#define EPSW_FLAG_N 0x00000002 /* negative flag */
+#define EPSW_FLAG_C 0x00000004 /* carry flag */
+#define EPSW_FLAG_V 0x00000008 /* overflow flag */
+#define EPSW_IM 0x00000700 /* interrupt mode */
+#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */
+#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */
+#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */
+#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */
+#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */
+#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */
+#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */
+#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */
+#define EPSW_IE 0x00000800 /* interrupt enable */
+#define EPSW_S 0x00003000 /* software auxilliary bits */
+#define EPSW_T 0x00008000 /* trace enable */
+#define EPSW_nSL 0x00010000 /* not supervisor level */
+#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */
+#define EPSW_nAR 0x00040000 /* register bank control */
+#define EPSW_ML 0x00080000 /* monitor level */
+#define EPSW_FE 0x00100000 /* FPU enable */
+
+/* FPU registers */
+#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */
+#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */
+#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */
+#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */
+#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */
+#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */
+#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */
+#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */
+#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */
+#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */
+#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */
+#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */
+#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */
+#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */
+#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */
+#define FPCR_RM 0x00030000 /* rounding mode */
+#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */
+#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */
+#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */
+#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */
+#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */
+#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */
+
+/* CPU control registers */
+#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */
+#define CPUP_DWBD 0x0020 /* write buffer disable flag */
+#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */
+#define CPUP_EXM 0x0080 /* exception operation mode */
+#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */
+#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */
+
+#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */
+#define CPUM_SLEEP 0x0004 /* set to enter sleep state */
+#define CPUM_HALT 0x0008 /* set to enter halt state */
+#define CPUM_STOP 0x0010 /* set to enter stop state */
+
+#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */
+#define CPUREV_TYPE 0x0000000f /* CPU type */
+#define CPUREV_TYPE_S 0
+#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */
+#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */
+#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */
+#define CPUREV_REVISION 0x000000f0 /* CPU revision */
+#define CPUREV_REVISION_S 4
+#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */
+#define CPUREV_ICWAY_S 8
+#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */
+#define CPUREV_ICSIZE_S 12
+#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */
+#define CPUREV_DCWAY_S 16
+#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */
+#define CPUREV_DCSIZE_S 20
+#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */
+#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */
+#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */
+
+#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */
+
+/* interrupt/exception control registers */
+#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */
+#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */
+#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */
+#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */
+#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */
+#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */
+#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */
+
+#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */
+#define TBR_TB 0xff000000 /* table base address bits 31-24 */
+#define TBR_INT_CODE 0x00ffffff /* interrupt code */
+
+#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */
+
+#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */
+#define sISR_IRQICE 0x00000001 /* ICE interrupt */
+#define sISR_ISTEP 0x00000002 /* single step interrupt */
+#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */
+#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */
+#define sISR_PIEXE 0x00000010 /* program interrupt */
+#define sISR_MEMERR 0x00000020 /* illegal memory access fault */
+#define sISR_IBREAK 0x00000040 /* instraction break interrupt */
+#define sISR_DBSRL 0x00000080 /* debug serial interrupt */
+#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */
+#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */
+#define sISR_OBREAK 0x00000400 /* operand break interrupt */
+#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */
+#define sISR_BUSERR 0x00001000 /* bus error fault */
+#define sISR_DBLFT 0x00002000 /* double fault */
+#define sISR_DBG 0x00008000 /* debug reserved interrupt */
+#define sISR_ITMISS 0x00010000 /* instruction TLB miss */
+#define sISR_DTMISS 0x00020000 /* data TLB miss */
+#define sISR_ITEX 0x00040000 /* instruction TLB access exception */
+#define sISR_DTEX 0x00080000 /* data TLB access exception */
+#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */
+#define sISR_ILGDA 0x00200000 /* illegal data access exception */
+#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */
+#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */
+#define sISR_PRIDA 0x01000000 /* privileged space data access excep */
+#define sISR_DISA 0x02000000 /* data space instruction access excep */
+#define sISR_SYSC 0x04000000 /* system call instruction excep */
+#define sISR_FPUD 0x08000000 /* FPU disabled excep */
+#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */
+#define sISR_FPUOP 0x20000000 /* FPU operation excep */
+#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */
+
+/* cache control registers */
+#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */
+#define CHCTR_ICEN 0x0001 /* instruction cache enable */
+#define CHCTR_DCEN 0x0002 /* data cache enable */
+#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */
+#define CHCTR_DCBUSY 0x0008 /* data cache busy */
+#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */
+#define CHCTR_DCINV 0x0020 /* data cache invalidate */
+#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */
+#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */
+#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */
+#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */
+#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */
+#define CHCTR_DCWMD 0xf000 /* data cache way mode */
+
+/* MMU control registers */
+#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */
+#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */
+#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */
+#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */
+#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */
+#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */
+#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */
+#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */
+#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */
+#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */
+#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */
+#define MMUCTR_CE 0x00008000 /* cacheable bit enable */
+#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */
+#define MMUCTR_DTE 0x00400000 /* data TLB enable */
+#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */
+#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */
+#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */
+#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */
+#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */
+#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */
+#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */
+#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */
+
+#define PIDR __SYSREG(0xc0000094, u16) /* PID register */
+#define PIDR_PID 0x00ff /* process identifier */
+
+#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */
+
+#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */
+#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */
+#define xPTEL_V 0x00000001 /* TLB entry valid */
+#define xPTEL_UNUSED1 0x00000002 /* unused bit */
+#define xPTEL_UNUSED2 0x00000004 /* unused bit */
+#define xPTEL_C 0x00000008 /* cached if set */
+#define xPTEL_PV 0x00000010 /* page valid */
+#define xPTEL_D 0x00000020 /* dirty */
+#define xPTEL_PR 0x000001c0 /* page protection */
+#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */
+#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */
+#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */
+#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */
+#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */
+#define xPTEL_G 0x00000200 /* global (use PID if 0) */
+#define xPTEL_PS 0x00000c00 /* page size */
+#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */
+#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */
+#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */
+#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */
+#define xPTEL_PPN 0xfffff006 /* physical page number */
+
+#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */
+#define xPTEL_UNUSED1_BIT 1
+#define xPTEL_UNUSED2_BIT 2
+#define xPTEL_C_BIT 3
+#define xPTEL_PV_BIT 4
+#define xPTEL_D_BIT 5
+#define xPTEL_G_BIT 9
+
+#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */
+#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */
+#define xPTEU_VPN 0xfffffc00 /* virtual page number */
+#define xPTEU_PID 0x000000ff /* process identifier to which applicable */
+
+#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */
+#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */
+#define xPTEL2_V 0x00000001 /* TLB entry valid */
+#define xPTEL2_C 0x00000002 /* cacheable */
+#define xPTEL2_PV 0x00000004 /* page valid */
+#define xPTEL2_D 0x00000008 /* dirty */
+#define xPTEL2_PR 0x00000070 /* page protection */
+#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */
+#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */
+#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */
+#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */
+#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */
+#define xPTEL2_G 0x00000080 /* global (use PID if 0) */
+#define xPTEL2_PS 0x00000300 /* page size */
+#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */
+#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */
+#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */
+#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */
+#define xPTEL2_PPN 0xfffffc00 /* physical page number */
+
+#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */
+#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */
+#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */
+#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */
+#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */
+#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */
+#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */
+#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */
+#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */
+#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */
+#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */
+#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */
+#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */
+#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */
+#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */
+#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */
+#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */
+#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */
+#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_CPU_REGS_H */
--- /dev/null
+#include <asm-generic/cputime.h>
--- /dev/null
+/* MN10300 Current task structure accessor
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_CURRENT_H
+#define _ASM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+/*
+ * dedicate E2 to keeping the current task pointer
+ */
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+
+register struct task_struct *const current asm("e2") __attribute__((used));
+
+#define get_current() current
+
+extern struct task_struct *__current;
+
+#else
+static inline __attribute__((const))
+struct task_struct *get_current(void)
+{
+ return current_thread_info()->task;
+}
+
+#define current get_current()
+#endif
+
+#endif /* _ASM_CURRENT_H */
--- /dev/null
+/* MN10300 Uninterruptible delay routines
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DELAY_H
+#define _ASM_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* _ASM_DELAY_H */
--- /dev/null
+#include <asm-generic/device.h>
--- /dev/null
+/* MN10300 64-bit division
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DIV64
+#define _ASM_DIV64
+
+#include <linux/types.h>
+
+extern void ____unhandled_size_in_do_div___(void);
+
+/*
+ * divide n by base, leaving the result in n and returning the remainder
+ * - we can do this quite efficiently on the MN10300 by cascading the divides
+ * through the MDR register
+ */
+#define do_div(n, base) \
+({ \
+ unsigned __rem = 0; \
+ if (sizeof(n) <= 4) { \
+ asm("mov %1,mdr \n" \
+ "divu %2,%0 \n" \
+ "mov mdr,%1 \n" \
+ : "+r"(n), "=d"(__rem) \
+ : "r"(base), "1"(__rem) \
+ : "cc" \
+ ); \
+ } else if (sizeof(n) <= 8) { \
+ union { \
+ unsigned long long l; \
+ u32 w[2]; \
+ } __quot; \
+ __quot.l = n; \
+ asm("mov %0,mdr \n" /* MDR = 0 */ \
+ "divu %3,%1 \n" \
+ /* __quot.MSL = __div.MSL / base, */ \
+ /* MDR = MDR:__div.MSL % base */ \
+ "divu %3,%2 \n" \
+ /* __quot.LSL = MDR:__div.LSL / base, */ \
+ /* MDR = MDR:__div.LSL % base */ \
+ "mov mdr,%0 \n" \
+ : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
+ : "r"(base), "0"(__rem), "1"(__quot.w[1]), \
+ "2"(__quot.w[0]) \
+ : "cc" \
+ ); \
+ n = __quot.l; \
+ } else { \
+ ____unhandled_size_in_do_div___(); \
+ } \
+ __rem; \
+})
+
+/*
+ * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
+ * so as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
+{
+ unsigned result;
+
+ asm("mulu %2,%0 \n" /* MDR:val = val*mult */
+ "divu %3,%0 \n" /* val = MDR:val/div;
+ * MDR = MDR:val%div */
+ : "=r"(result)
+ : "0"(val), "ir"(mult), "r"(div)
+ );
+
+ return result;
+}
+
+/*
+ * do a signed 32-bit multiply and divide with intermediate 64-bit product so
+ * as not to lose accuracy
+ * - we use the MDR register to hold the MSW of the product
+ */
+static inline __attribute__((const))
+signed __muldiv64s(signed val, signed mult, signed div)
+{
+ signed result;
+
+ asm("mul %2,%0 \n" /* MDR:val = val*mult */
+ "div %3,%0 \n" /* val = MDR:val/div;
+ * MDR = MDR:val%div */
+ : "=r"(result)
+ : "0"(val), "ir"(mult), "r"(div)
+ );
+
+ return result;
+}
+
+#endif /* _ASM_DIV64 */
--- /dev/null
+/* DMA mapping routines for the MN10300 arch
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cache.h>
+#include <asm/io.h>
+
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, int flag);
+
+extern void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
+
+/*
+ * Map a single buffer of the indicated size for DMA in streaming mode. The
+ * 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory until
+ * either pci_unmap_single or pci_dma_sync_single is performed.
+ */
+static inline
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ mn10300_dcache_flush_inv();
+ return virt_to_bus(ptr);
+}
+
+/*
+ * Unmap a single streaming mode DMA translation. The dma_addr and size must
+ * match what was provided for in a previous pci_map_single call. All other
+ * usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guarenteed to see
+ * whatever the device wrote there.
+ */
+static inline
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Map a set of buffers described by scatterlist in streaming mode for DMA.
+ * This is the scather-gather version of the above pci_map_single interface.
+ * Here the scatter gather list elements are each tagged with the appropriate
+ * dma address and length. They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of DMA
+ * address/length pairs than there are SG table elements. (for example
+ * via virtual mapping capabilities) The routine returns the number of
+ * addr/length pairs actually used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are the same
+ * here.
+ */
+static inline
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+ WARN_ON(nents == 0 || sglist[0].length == 0);
+
+ for_each_sg(sglist, sg, nents, i) {
+ BUG_ON(!sg_page(sg));
+
+ sg->dma_address = sg_phys(sg);
+ }
+
+ mn10300_dcache_flush_inv();
+ return nents;
+}
+
+/*
+ * Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+
+/*
+ * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
+ * to pci_map_single, but takes a struct page instead of a virtual address
+ */
+static inline
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+ return page_to_bus(page) + offset;
+}
+
+static inline
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(direction == DMA_NONE);
+}
+
+/*
+ * Make physical memory consistent for a single streaming mode DMA translation
+ * after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the buffer using
+ * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
+ * function before doing so. At the next point you give the PCI dma address
+ * back to the card, the device again owns the buffer.
+ */
+static inline
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+static inline
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+
+/*
+ * Make physical memory consistent for a set of streaming mode DMA translations
+ * after a transfer.
+ *
+ * The same as pci_dma_sync_single but for a scatter-gather list, same rules
+ * and usage.
+ */
+static inline
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+}
+
+static inline
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+/*
+ * Return whether the given PCI device DMA address mask can be supported
+ * properly. For example, if your device can only drive the low 24-bits during
+ * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
+ * function.
+ */
+static inline
+int dma_supported(struct device *dev, u64 mask)
+{
+ /*
+ * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
+ * guarantee allocations that must be within a tighter range than
+ * GFP_DMA
+ */
+ if (mask < 0x00ffffff)
+ return 0;
+ return 1;
+}
+
+static inline
+int dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+ return 0;
+}
+
+static inline
+int dma_get_cache_alignment(void)
+{
+ return 1 << L1_CACHE_SHIFT;
+}
+
+#define dma_is_consistent(d) (1)
+
+static inline
+void dma_cache_sync(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ mn10300_dcache_flush_inv();
+}
+
+#endif
--- /dev/null
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS 0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+ return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */
--- /dev/null
+/* MN10300 on-board DMA controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMACTL_REGS_H
+#define _ASM_DMACTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* DMA registers */
+#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */
+#define DMxCTR_BG 0x0000001f /* transfer request source */
+#define DMxCTR_BG_SOFT 0x00000000 /* - software source */
+#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */
+#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */
+#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */
+#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */
+#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */
+#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */
+#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */
+#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */
+#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */
+#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */
+#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */
+#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */
+#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */
+#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */
+#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */
+#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */
+#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */
+#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */
+#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */
+#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */
+#define DMxCTR_SAM_INCR 0x00000000 /* - increment */
+#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */
+#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */
+#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */
+#define DMxCTR_DAM_INCR 0x00000000 /* - increment */
+#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */
+#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */
+#define DMxCTR_TM 0x00001800 /* DMA transfer mode */
+#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */
+#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */
+#define DMxCTR_UT 0x00006000 /* DMA transfer unit */
+#define DMxCTR_UT_1 0x00000000 /* - 1 byte */
+#define DMxCTR_UT_2 0x00002000 /* - 2 byte */
+#define DMxCTR_UT_4 0x00004000 /* - 4 byte */
+#define DMxCTR_UT_16 0x00006000 /* - 16 byte */
+#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */
+#define DMxCTR_RQM 0x00060000 /* external request input source mode */
+#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */
+#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */
+#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */
+#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */
+#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */
+#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */
+
+#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */
+
+#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */
+
+#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */
+#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */
+
+#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent
+ * size reg */
+#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */
+
+#define DM0IRQ 16 /* DMA channel 0 complete IRQ */
+#define DM1IRQ 17 /* DMA channel 1 complete IRQ */
+#define DM2IRQ 18 /* DMA channel 2 complete IRQ */
+#define DM3IRQ 19 /* DMA channel 3 complete IRQ */
+
+#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */
+#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */
+#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */
+#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */
+
+#ifndef __ASSEMBLY__
+
+struct mn10300_dmactl_regs {
+ u32 ctr;
+ const void *src;
+ void *dst;
+ u32 siz;
+ u32 cyc;
+} __attribute__((aligned(0x100)));
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_DMACTL_REGS_H */
--- /dev/null
+/* MN10300 ELF constant and register definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_ELF_H
+#define _ASM_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * AM33 relocations
+ */
+#define R_MN10300_NONE 0 /* No reloc. */
+#define R_MN10300_32 1 /* Direct 32 bit. */
+#define R_MN10300_16 2 /* Direct 16 bit. */
+#define R_MN10300_8 3 /* Direct 8 bit. */
+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */
+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */
+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */
+#define R_MN10300_24 9 /* Direct 24 bit. */
+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */
+
+/*
+ * ELF register definitions..
+ */
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define ELF_NFPREG 32
+typedef float elf_fpreg_t;
+
+typedef struct {
+ elf_fpreg_t fpregs[ELF_NFPREG];
+ u_int32_t fpcr;
+} elf_fpregset_t;
+
+extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture
+ */
+#define elf_check_arch(x) \
+ (((x)->e_machine == EM_CYGNUS_MN10300) || \
+ ((x)->e_machine == EM_MN10300))
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_MN10300
+
+/*
+ * ELF process initialiser
+ */
+#define ELF_PLAT_INIT(_r, load_addr) \
+do { \
+ struct pt_regs *_ur = current->thread.uregs; \
+ _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \
+ _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \
+ _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \
+ _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \
+ _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \
+ _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \
+} while (0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE 4096
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ * - must clear the VMALLOC area
+ */
+#define ELF_ET_DYN_BASE 0x04000000
+
+/*
+ * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ * now struct user_regs, they are different)
+ * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
+ */
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+do { \
+ pr_reg[0] = regs->a3; \
+ pr_reg[1] = regs->a2; \
+ pr_reg[2] = regs->d3; \
+ pr_reg[3] = regs->d2; \
+ pr_reg[4] = regs->mcvf; \
+ pr_reg[5] = regs->mcrl; \
+ pr_reg[6] = regs->mcrh; \
+ pr_reg[7] = regs->mdrq; \
+ pr_reg[8] = regs->e1; \
+ pr_reg[9] = regs->e0; \
+ pr_reg[10] = regs->e7; \
+ pr_reg[11] = regs->e6; \
+ pr_reg[12] = regs->e5; \
+ pr_reg[13] = regs->e4; \
+ pr_reg[14] = regs->e3; \
+ pr_reg[15] = regs->e2; \
+ pr_reg[16] = regs->sp; \
+ pr_reg[17] = regs->lar; \
+ pr_reg[18] = regs->lir; \
+ pr_reg[19] = regs->mdr; \
+ pr_reg[20] = regs->a1; \
+ pr_reg[21] = regs->a0; \
+ pr_reg[22] = regs->d1; \
+ pr_reg[23] = regs->d0; \
+ pr_reg[24] = regs->orig_d0; \
+ pr_reg[25] = regs->epsw; \
+ pr_reg[26] = regs->pc; \
+} while (0);
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports. This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For the moment, we have only optimizations for the Intel generations,
+ * but that could change...
+ */
+#define ELF_PLATFORM (NULL)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#endif
+
+#endif /* _ASM_ELF_H */
--- /dev/null
+#include <asm-generic/emergency-restart.h>
--- /dev/null
+#include <asm-generic/errno.h>
--- /dev/null
+/* MN10300 Microcontroller core exceptions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_EXCEPTIONS_H
+#define _ASM_EXCEPTIONS_H
+
+#include <linux/linkage.h>
+
+/*
+ * define the breakpoint instruction opcode to use
+ * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
+ * (can use 0xF7)
+ */
+#define GDBSTUB_BKPT 0xFF
+
+#ifndef __ASSEMBLY__
+
+/*
+ * enumeration of exception codes (as extracted from TBR MSW)
+ */
+enum exception_code {
+ EXCEP_RESET = 0x000000, /* reset */
+
+ /* MMU exceptions */
+ EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */
+ EXCEP_DTLBMISS = 0x000108, /* data TLB miss */
+ EXCEP_IAERROR = 0x000110, /* instruction address */
+ EXCEP_DAERROR = 0x000118, /* data address */
+
+ /* system exceptions */
+ EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */
+ EXCEP_ISTEP = 0x000130, /* single step */
+ EXCEP_IBREAK = 0x000150, /* instruction breakpoint */
+ EXCEP_OBREAK = 0x000158, /* operand breakpoint */
+ EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */
+ EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */
+ EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */
+ EXCEP_MEMERR = 0x000178, /* illegal memory access */
+ EXCEP_MISALIGN = 0x000180, /* misalignment */
+ EXCEP_BUSERROR = 0x000188, /* bus error */
+ EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */
+ EXCEP_ILLDATACC = 0x000198, /* illegal data access */
+ EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */
+ EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */
+ EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */
+ EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */
+ EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */
+
+ /* FPU exceptions */
+ EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */
+ EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */
+ EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */
+
+ /* interrupts */
+ EXCEP_WDT = 0x000240, /* watchdog timer overflow */
+ EXCEP_NMI = 0x000248, /* non-maskable interrupt */
+ EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */
+ EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */
+ EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */
+ EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */
+ EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */
+ EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */
+ EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */
+
+ /* system calls */
+ EXCEP_SYSCALL0 = 0x000300, /* system call 0 */
+ EXCEP_SYSCALL1 = 0x000308, /* system call 1 */
+ EXCEP_SYSCALL2 = 0x000310, /* system call 2 */
+ EXCEP_SYSCALL3 = 0x000318, /* system call 3 */
+ EXCEP_SYSCALL4 = 0x000320, /* system call 4 */
+ EXCEP_SYSCALL5 = 0x000328, /* system call 5 */
+ EXCEP_SYSCALL6 = 0x000330, /* system call 6 */
+ EXCEP_SYSCALL7 = 0x000338, /* system call 7 */
+ EXCEP_SYSCALL8 = 0x000340, /* system call 8 */
+ EXCEP_SYSCALL9 = 0x000348, /* system call 9 */
+ EXCEP_SYSCALL10 = 0x000350, /* system call 10 */
+ EXCEP_SYSCALL11 = 0x000358, /* system call 11 */
+ EXCEP_SYSCALL12 = 0x000360, /* system call 12 */
+ EXCEP_SYSCALL13 = 0x000368, /* system call 13 */
+ EXCEP_SYSCALL14 = 0x000370, /* system call 14 */
+ EXCEP_SYSCALL15 = 0x000378, /* system call 15 */
+};
+
+extern void __set_intr_stub(enum exception_code code, void *handler);
+extern void set_intr_stub(enum exception_code code, void *handler);
+extern void set_jtag_stub(enum exception_code code, void *handler);
+
+struct pt_regs;
+
+extern asmlinkage void __common_exception(void);
+extern asmlinkage void itlb_miss(void);
+extern asmlinkage void dtlb_miss(void);
+extern asmlinkage void itlb_aerror(void);
+extern asmlinkage void dtlb_aerror(void);
+extern asmlinkage void raw_bus_error(void);
+extern asmlinkage void double_fault(void);
+extern asmlinkage int system_call(struct pt_regs *);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
+extern asmlinkage void uninitialised_exception(struct pt_regs *,
+ enum exception_code);
+extern asmlinkage void irq_handler(void);
+extern asmlinkage void profile_handler(void);
+extern asmlinkage void nmi_handler(void);
+extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
+
+extern void die(const char *, struct pt_regs *, enum exception_code)
+ ATTRIB_NORET;
+
+extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_EXCEPTIONS_H */
--- /dev/null
+/* MN10300 Frame buffer stuff
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FB_H
+#define _ASM_FB_H
+
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+ return 0;
+}
+
+#endif /* _ASM_FB_H */
--- /dev/null
+#include <asm-generic/fcntl.h>
--- /dev/null
+/* MN10300 FPU definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FPU_H
+#define _ASM_FPU_H
+
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+
+#ifdef __KERNEL__
+
+/* the task that owns the FPU state */
+extern struct task_struct *fpu_state_owner;
+
+#define set_using_fpu(tsk) \
+do { \
+ (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \
+} while (0)
+
+#define clear_using_fpu(tsk) \
+do { \
+ (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \
+} while (0)
+
+#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
+
+#define unlazy_fpu(tsk) \
+do { \
+ preempt_disable(); \
+ if (fpu_state_owner == (tsk)) \
+ fpu_save(&tsk->thread.fpu_state); \
+ preempt_enable(); \
+} while (0)
+
+#define exit_fpu() \
+do { \
+ struct task_struct *__tsk = current; \
+ preempt_disable(); \
+ if (fpu_state_owner == __tsk) \
+ fpu_state_owner = NULL; \
+ preempt_enable(); \
+} while (0)
+
+#define flush_fpu() \
+do { \
+ struct task_struct *__tsk = current; \
+ preempt_disable(); \
+ if (fpu_state_owner == __tsk) { \
+ fpu_state_owner = NULL; \
+ __tsk->thread.uregs->epsw &= ~EPSW_FE; \
+ } \
+ preempt_enable(); \
+ clear_using_fpu(__tsk); \
+} while (0)
+
+extern asmlinkage void fpu_init_state(void);
+extern asmlinkage void fpu_kill_state(struct task_struct *);
+extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
+extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
+
+#ifdef CONFIG_FPU
+extern asmlinkage void fpu_save(struct fpu_state_struct *);
+extern asmlinkage void fpu_restore(struct fpu_state_struct *);
+#else
+#define fpu_save(a)
+#define fpu_restore(a)
+#endif /* CONFIG_FPU */
+
+/*
+ * signal frame handlers
+ */
+extern int fpu_setup_sigcontext(struct fpucontext *buf);
+extern int fpu_restore_sigcontext(struct fpucontext *buf);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_FPU_H */
--- /dev/null
+/* MN10300 Microcontroller core system register definitions -*- asm -*-
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_FRAME_INC
+#define _ASM_FRAME_INC
+
+#ifndef __ASSEMBLY__
+#error not for use in C files
+#endif
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#define pi break
+
+#define fp a3
+
+###############################################################################
+#
+# build a stack frame from the registers
+# - the caller has subtracted 4 from SP before coming here
+#
+###############################################################################
+.macro SAVE_ALL
+ add -4,sp # next exception frame ptr save area
+ movm [other],(sp)
+ mov usp,a1
+ mov a1,(sp) # USP in MOVM[other] dummy slot
+ movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
+ mov sp,fp # FRAME pointer in A3
+ add -12,sp # allow for calls to be made
+ mov (__frame),a1
+ mov a1,(REG_NEXT,fp)
+ mov fp,(__frame)
+
+ and ~EPSW_FE,epsw # disable the FPU inside the kernel
+
+ # we may be holding current in E2
+#ifdef CONFIG_MN10300_CURRENT_IN_E2
+ mov (__current),e2
+#endif
+.endm
+
+###############################################################################
+#
+# restore the registers from a stack frame
+#
+###############################################################################
+.macro RESTORE_ALL
+ # peel back the stack to the calling frame
+ # - this permits execve() to discard extra frames due to kernel syscalls
+ mov (__frame),fp
+ mov fp,sp
+ mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
+ mov d0,(__frame)
+
+#ifndef CONFIG_MN10300_USING_JTAG
+ mov (REG_EPSW,fp),d0
+ btst EPSW_T,d0
+ beq 99f
+
+ or EPSW_NMID,epsw
+ movhu (DCR),d1
+ or 0x0001, d1
+ movhu d1,(DCR)
+
+99:
+#endif
+ movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
+
+ # must restore usp even if returning to kernel space,
+ # when CONFIG_PREEMPT is enabled.
+ mov (sp),a1 # USP in MOVM[other] dummy slot
+ mov a1,usp
+
+ movm (sp),[other]
+ add 8,sp
+ rti
+
+.endm
+
+
+#endif /* _ASM_FRAME_INC */
--- /dev/null
+/* empty */
--- /dev/null
+#include <asm-generic/futex.h>
--- /dev/null
+/* MN10300 Kernel GDB stub definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_GDB_STUB_H
+#define _ASM_GDB_STUB_H
+
+#include <asm/exceptions.h>
+
+/*
+ * register ID numbers in GDB remote protocol
+ */
+
+#define GDB_REGID_PC 9
+#define GDB_REGID_FP 7
+#define GDB_REGID_SP 8
+
+/*
+ * virtual stack layout for the GDB exception handler
+ */
+#define NUMREGS 64
+
+#define GDB_FR_D0 (0 * 4)
+#define GDB_FR_D1 (1 * 4)
+#define GDB_FR_D2 (2 * 4)
+#define GDB_FR_D3 (3 * 4)
+#define GDB_FR_A0 (4 * 4)
+#define GDB_FR_A1 (5 * 4)
+#define GDB_FR_A2 (6 * 4)
+#define GDB_FR_A3 (7 * 4)
+
+#define GDB_FR_SP (8 * 4)
+#define GDB_FR_PC (9 * 4)
+#define GDB_FR_MDR (10 * 4)
+#define GDB_FR_EPSW (11 * 4)
+#define GDB_FR_LIR (12 * 4)
+#define GDB_FR_LAR (13 * 4)
+#define GDB_FR_MDRQ (14 * 4)
+
+#define GDB_FR_E0 (15 * 4)
+#define GDB_FR_E1 (16 * 4)
+#define GDB_FR_E2 (17 * 4)
+#define GDB_FR_E3 (18 * 4)
+#define GDB_FR_E4 (19 * 4)
+#define GDB_FR_E5 (20 * 4)
+#define GDB_FR_E6 (21 * 4)
+#define GDB_FR_E7 (22 * 4)
+
+#define GDB_FR_SSP (23 * 4)
+#define GDB_FR_MSP (24 * 4)
+#define GDB_FR_USP (25 * 4)
+#define GDB_FR_MCRH (26 * 4)
+#define GDB_FR_MCRL (27 * 4)
+#define GDB_FR_MCVF (28 * 4)
+
+#define GDB_FR_FPCR (29 * 4)
+#define GDB_FR_DUMMY0 (30 * 4)
+#define GDB_FR_DUMMY1 (31 * 4)
+
+#define GDB_FR_FS0 (32 * 4)
+
+#define GDB_FR_SIZE (NUMREGS * 4)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This is the same as above, but for the high-level
+ * part of the GDB stub.
+ */
+
+struct gdb_regs {
+ /* saved main processor registers */
+ u32 d0, d1, d2, d3, a0, a1, a2, a3;
+ u32 sp, pc, mdr, epsw, lir, lar, mdrq;
+ u32 e0, e1, e2, e3, e4, e5, e6, e7;
+ u32 ssp, msp, usp, mcrh, mcrl, mcvf;
+
+ /* saved floating point registers */
+ u32 fpcr, _dummy0, _dummy1;
+ u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7;
+ u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15;
+ u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
+ u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
+};
+
+/*
+ * Prototypes
+ */
+extern void show_registers_only(struct pt_regs *regs);
+
+extern asmlinkage void gdbstub_init(void);
+extern asmlinkage void gdbstub_exit(int status);
+extern asmlinkage void gdbstub_io_init(void);
+extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
+extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
+extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
+extern asmlinkage void gdbstub_io_tx_flush(void);
+
+extern asmlinkage void gdbstub_io_rx_handler(void);
+extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
+extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code);
+extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
+extern asmlinkage void __gdbstub_bug_trap(void);
+extern asmlinkage void __gdbstub_pause(void);
+extern asmlinkage void start_kernel(void);
+
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+extern asmlinkage void gdbstub_purge_cache(void);
+#else
+#define gdbstub_purge_cache() do {} while (0)
+#endif
+
+/* Used to prevent crashes in memory access */
+extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *);
+extern asmlinkage int gdbstub_read_word(const u8 *, u8 *);
+extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *);
+extern asmlinkage int gdbstub_write_byte(u32, u8 *);
+extern asmlinkage int gdbstub_write_word(u32, u8 *);
+extern asmlinkage int gdbstub_write_dword(u32, u8 *);
+
+extern asmlinkage void gdbstub_read_byte_guard(void);
+extern asmlinkage void gdbstub_read_byte_cont(void);
+extern asmlinkage void gdbstub_read_word_guard(void);
+extern asmlinkage void gdbstub_read_word_cont(void);
+extern asmlinkage void gdbstub_read_dword_guard(void);
+extern asmlinkage void gdbstub_read_dword_cont(void);
+extern asmlinkage void gdbstub_write_byte_guard(void);
+extern asmlinkage void gdbstub_write_byte_cont(void);
+extern asmlinkage void gdbstub_write_word_guard(void);
+extern asmlinkage void gdbstub_write_word_cont(void);
+extern asmlinkage void gdbstub_write_dword_guard(void);
+extern asmlinkage void gdbstub_write_dword_cont(void);
+
+extern u8 gdbstub_rx_buffer[PAGE_SIZE];
+extern u32 gdbstub_rx_inp;
+extern u32 gdbstub_rx_outp;
+extern u8 gdbstub_rx_overflow;
+extern u8 gdbstub_busy;
+extern u8 gdbstub_rx_unget;
+
+#ifdef CONFIG_GDBSTUB_DEBUGGING
+extern void gdbstub_printk(const char *fmt, ...)
+ __attribute__((format(printf, 1, 2)));
+#else
+static inline __attribute__((format(printf, 1, 2)))
+void gdbstub_printk(const char *fmt, ...)
+{
+}
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
+#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_entry(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
+#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_proto(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_IO
+#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_io(FMT, ...) ({ 0; })
+#endif
+
+#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
+#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
+#else
+#define gdbstub_bkpt(FMT, ...) ({ 0; })
+#endif
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_GDB_STUB_H */
--- /dev/null
+/* MN10300 Hardware IRQ statistics and management
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HARDIRQ_H
+#define _ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+#include <asm/exceptions.h>
+
+/* assembly code in softirq.h is sensitive to the offsets of these fields */
+typedef struct {
+ unsigned int __softirq_pending;
+ unsigned long idle_timestamp;
+ unsigned int __nmi_count; /* arch dependent */
+ unsigned int __irq_count; /* arch dependent */
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(int irq);
+
+/*
+ * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
+ * - these should jump to __common_exception in entry.S unless there's a good
+ * reason to do otherwise (see trap_preinit() in traps.c)
+ */
+typedef void (*intr_stub_fnx)(struct pt_regs *regs,
+ enum exception_code intcode);
+
+/*
+ * manipulate pointers in the Exception table (see entry.S)
+ * - these are indexed by decoding the lower 24 bits of the TBR register
+ * - note that the MN103E010 doesn't always trap through the correct vector,
+ * but does always set the TBR correctly
+ */
+extern asmlinkage void set_excp_vector(enum exception_code code,
+ intr_stub_fnx handler);
+
+#endif /* _ASM_HARDIRQ_H */
--- /dev/null
+/* MN10300 Virtual kernel memory mappings for high memory
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/highmem.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/highmem.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* undef for production */
+#undef HIGHMEM_DEBUG
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void __init kmap_init(void);
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define PKMAP_BASE 0xfe000000UL
+#define LAST_PKMAP 1024
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern unsigned long kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline unsigned long kmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (page < highmem_start_page)
+ return page_address(page);
+ return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (page < highmem_start_page)
+ return;
+ kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ if (page < highmem_start_page)
+ return page_address(page);
+
+ debug_kmap_atomic(type);
+ idx = type + KM_TYPE_NR * smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#if HIGHMEM_DEBUG
+ if (!pte_none(*(kmap_pte - idx)))
+ BUG();
+#endif
+ set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
+ __flush_tlb_one(vaddr);
+
+ return vaddr;
+}
+
+static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
+{
+#if HIGHMEM_DEBUG
+ enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
+
+ if (vaddr < FIXADDR_START) /* FIXME */
+ return;
+
+ if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
+ BUG();
+
+ /*
+ * force other mappings to Oops if they'll try to access
+ * this pte without first remap it
+ */
+ pte_clear(kmap_pte - idx);
+ __flush_tlb_one(vaddr);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
--- /dev/null
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_HW_IRQ_H
+#define _ASM_HW_IRQ_H
+
+#endif /* _ASM_HW_IRQ_H */
--- /dev/null
+/* MN10300 On-board interrupt controller registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_INTCTL_REGS_H
+#define _ASM_INTCTL_REGS_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+
+/* interrupt controller registers */
+#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */
+
+#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */
+#define IAGR_GN 0x00fc /* group number register
+ * (documentation _has_ to be wrong)
+ */
+
+#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */
+#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
+
+#define SET_XIRQ_TRIGGER(X,Y) \
+do { \
+ u16 x = EXTMD; \
+ x &= ~(3 << ((X) * 2)); \
+ x |= ((Y) & 3) << ((X) * 2); \
+ EXTMD = x; \
+} while (0)
+
+#define XIRQ_TRIGGER_LOWLEVEL 0
+#define XIRQ_TRIGGER_HILEVEL 1
+#define XIRQ_TRIGGER_NEGEDGE 2
+#define XIRQ_TRIGGER_POSEDGE 3
+
+/* non-maskable interrupt control */
+#define NMIIRQ 0
+#define NMICR GxICR(NMIIRQ) /* NMI control register */
+#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */
+#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */
+#define NMICR_ABUSERR 0x0008 /* async bus error flag */
+
+/* maskable interrupt control */
+#define GxICR_DETECT 0x0001 /* interrupt detect flag */
+#define GxICR_REQUEST 0x0010 /* interrupt request flag */
+#define GxICR_ENABLE 0x0100 /* interrupt enable flag */
+#define GxICR_LEVEL 0x7000 /* interrupt priority level */
+#define GxICR_LEVEL_0 0x0000 /* - level 0 */
+#define GxICR_LEVEL_1 0x1000 /* - level 1 */
+#define GxICR_LEVEL_2 0x2000 /* - level 2 */
+#define GxICR_LEVEL_3 0x3000 /* - level 3 */
+#define GxICR_LEVEL_4 0x4000 /* - level 4 */
+#define GxICR_LEVEL_5 0x5000 /* - level 5 */
+#define GxICR_LEVEL_6 0x6000 /* - level 6 */
+#define GxICR_LEVEL_SHIFT 12
+
+#ifndef __ASSEMBLY__
+extern void set_intr_level(int irq, u16 level);
+extern void set_intr_postackable(int irq);
+#endif
+
+/* external interrupts */
+#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_INTCTL_REGS_H */
--- /dev/null
+/* MN10300 I/O port emulation and memory-mapped I/O
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IO_H
+#define _ASM_IO_H
+
+#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <asm/cpu-regs.h>
+#include <asm/cacheflush.h>
+
+#define mmiowb() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the x86 architecture, we just read/write the
+ * memory location directly.
+ */
+static inline u8 readb(const volatile void __iomem *addr)
+{
+ return *(const volatile u8 *) addr;
+}
+
+static inline u16 readw(const volatile void __iomem *addr)
+{
+ return *(const volatile u16 *) addr;
+}
+
+static inline u32 readl(const volatile void __iomem *addr)
+{
+ return *(const volatile u32 *) addr;
+}
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+
+static inline void writeb(u8 b, volatile void __iomem *addr)
+{
+ *(volatile u8 *) addr = b;
+}
+
+static inline void writew(u16 b, volatile void __iomem *addr)
+{
+ *(volatile u16 *) addr = b;
+}
+
+static inline void writel(u32 b, volatile void __iomem *addr)
+{
+ *(volatile u32 *) addr = b;
+}
+
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+/*****************************************************************************/
+/*
+ * traditional input/output functions
+ */
+static inline u8 inb_local(unsigned long addr)
+{
+ return readb((volatile void __iomem *) addr);
+}
+
+static inline void outb_local(u8 b, unsigned long addr)
+{
+ return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline u8 inb(unsigned long addr)
+{
+ return readb((volatile void __iomem *) addr);
+}
+
+static inline u16 inw(unsigned long addr)
+{
+ return readw((volatile void __iomem *) addr);
+}
+
+static inline u32 inl(unsigned long addr)
+{
+ return readl((volatile void __iomem *) addr);
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+ return writeb(b, (volatile void __iomem *) addr);
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+ return writew(b, (volatile void __iomem *) addr);
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+ return writel(b, (volatile void __iomem *) addr);
+}
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x, addr) outb((x), (addr))
+#define outw_p(x, addr) outw((x), (addr))
+#define outl_p(x, addr) outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u8 *buf = buffer;
+ do {
+ u8 x = inb(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u16 *buf = buffer;
+ do {
+ u16 x = inw(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+ if (count) {
+ u32 *buf = buffer;
+ do {
+ u32 x = inl(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+ if (count) {
+ const u8 *buf = buffer;
+ do {
+ outb(*buf++, addr);
+ } while (--count);
+ }
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+ if (count) {
+ const u16 *buf = buffer;
+ do {
+ outw(*buf++, addr);
+ } while (--count);
+ }
+}
+
+extern void __outsl(unsigned long addr, const void *buffer, int count);
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+ if ((unsigned long) buffer & 0x3)
+ return __outsl(addr, buffer, count);
+
+ if (count) {
+ const u32 *buf = buffer;
+ do {
+ outl(*buf++, addr);
+ } while (--count);
+ }
+}
+
+#define ioread8(addr) readb(addr)
+#define ioread16(addr) readw(addr)
+#define ioread32(addr) readl(addr)
+
+#define iowrite8(v, addr) writeb((v), (addr))
+#define iowrite16(v, addr) writew((v), (addr))
+#define iowrite32(v, addr) writel((v), (addr))
+
+#define ioread8_rep(p, dst, count) \
+ insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+ insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+ insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+ outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+ outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+ outsl((unsigned long) (p), (src), (count))
+
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#ifdef __KERNEL__
+
+#include <linux/vmalloc.h>
+#define __io_virt(x) ((void *) (x))
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+}
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+ return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+ return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+static inline void *__ioremap(unsigned long offset, unsigned long size,
+ unsigned long flags)
+{
+ return (void *) offset;
+}
+
+static inline void *ioremap(unsigned long offset, unsigned long size)
+{
+ return (void *) offset;
+}
+
+/*
+ * This one maps high address device memory and turns off caching for that
+ * area. it's useful if some control registers are in such an area and write
+ * combining or read caching is not desirable:
+ */
+static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
+{
+ return (void *) (offset | 0x20000000);
+}
+
+#define ioremap_wc ioremap_nocache
+
+static inline void iounmap(void *addr)
+{
+}
+
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return (void __iomem *) port;
+}
+
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#define xlate_dev_kmem_ptr(p) ((void *) (p))
+#define xlate_dev_mem_ptr(p) ((void *) (p))
+
+/*
+ * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
+ */
+static inline unsigned long virt_to_bus(volatile void *address)
+{
+ return ((unsigned long) address) & ~0x20000000;
+}
+
+static inline void *bus_to_virt(unsigned long address)
+{
+ return (void *) address;
+}
+
+#define page_to_bus page_to_phys
+
+#define memset_io(a, b, c) memset(__io_virt(a), (b), (c))
+#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c))
+#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c))
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IO_H */
--- /dev/null
+#include <asm-generic/ioctl.h>
--- /dev/null
+#ifndef _ASM_IOCTLS_H
+#define _ASM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS 0x5401
+#define TCSETS 0x5402
+#define TCSETSW 0x5403
+#define TCSETSF 0x5404
+#define TCGETA 0x5405
+#define TCSETA 0x5406
+#define TCSETAW 0x5407
+#define TCSETAF 0x5408
+#define TCSBRK 0x5409
+#define TCXONC 0x540A
+#define TCFLSH 0x540B
+#define TIOCEXCL 0x540C
+#define TIOCNXCL 0x540D
+#define TIOCSCTTY 0x540E
+#define TIOCGPGRP 0x540F
+#define TIOCSPGRP 0x5410
+#define TIOCOUTQ 0x5411
+#define TIOCSTI 0x5412
+#define TIOCGWINSZ 0x5413
+#define TIOCSWINSZ 0x5414
+#define TIOCMGET 0x5415
+#define TIOCMBIS 0x5416
+#define TIOCMBIC 0x5417
+#define TIOCMSET 0x5418
+#define TIOCGSOFTCAR 0x5419
+#define TIOCSSOFTCAR 0x541A
+#define FIONREAD 0x541B
+#define TIOCINQ FIONREAD
+#define TIOCLINUX 0x541C
+#define TIOCCONS 0x541D
+#define TIOCGSERIAL 0x541E
+#define TIOCSSERIAL 0x541F
+#define TIOCPKT 0x5420
+#define FIONBIO 0x5421
+#define TIOCNOTTY 0x5422
+#define TIOCSETD 0x5423
+#define TIOCGETD 0x5424
+#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK 0x5427 /* BSD compatibility */
+#define TIOCCBRK 0x5428 /* BSD compatibility */
+#define TIOCGSID 0x5429 /* Return the session ID of FD */
+#define TCGETS2 _IOR('T', 0x2A, struct termios2)
+#define TCSETS2 _IOW('T', 0x2B, struct termios2)
+#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
+#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
+#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
+ * (of pty-mux device) */
+#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
+
+#define FIONCLEX 0x5450
+#define FIOCLEX 0x5451
+#define FIOASYNC 0x5452
+#define TIOCSERCONFIG 0x5453
+#define TIOCSERGWILD 0x5454
+#define TIOCSERSWILD 0x5455
+#define TIOCGLCKTRMIOS 0x5456
+#define TIOCSLCKTRMIOS 0x5457
+#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
+#define TIOCSERGETLSR 0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
+#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
+#define FIOQSIZE 0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA 0
+#define TIOCPKT_FLUSHREAD 1
+#define TIOCPKT_FLUSHWRITE 2
+#define TIOCPKT_STOP 4
+#define TIOCPKT_START 8
+#define TIOCPKT_NOSTOP 16
+#define TIOCPKT_DOSTOP 32
+
+#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
+
+#endif /* _ASM_IOCTLS_H */
--- /dev/null
+#include <asm-generic/ipc.h>
--- /dev/null
+#ifndef _ASM_IPCBUF_H
+#define _ASM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+ __kernel_key_t key;
+ __kernel_uid32_t uid;
+ __kernel_gid32_t gid;
+ __kernel_uid32_t cuid;
+ __kernel_gid32_t cgid;
+ __kernel_mode_t mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ unsigned long __unused1;
+ unsigned long __unused2;
+};
+
+#endif /* _ASM_IPCBUF_H */
--- /dev/null
+/* MN10300 Hardware interrupt definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-i386/irq.h:
+ * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#include <asm/intctl-regs.h>
+#include <asm/reset-regs.h>
+#include <proc/irq.h>
+
+/* this number is used when no interrupt has been assigned */
+#define NO_IRQ INT_MAX
+
+/* hardware irq numbers */
+#define NR_IRQS GxICR_NUM_IRQS
+
+/* external hardware irq numbers */
+#define NR_XIRQS GxICR_NUM_XIRQS
+
+#define irq_canonicalize(IRQ) (IRQ)
+
+#endif /* _ASM_IRQ_H */
--- /dev/null
+/* MN10300 IRQ registers pointer definition
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_IRQ_REGS_H
+#define _ASM_IRQ_REGS_H
+
+/*
+ * Per-cpu current frame pointer - the location of the last exception frame on
+ * the stack
+ */
+#define ARCH_HAS_OWN_IRQ_REGS
+
+#ifndef __ASSEMBLY__
+#define get_irq_regs() (__frame)
+#endif
+
+#endif /* _ASM_IRQ_REGS_H */
--- /dev/null
+/* MN10300 In-kernel death knells
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_KDEBUG_H
+#define _ASM_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+ DIE_OOPS = 1,
+ DIE_BREAKPOINT,
+ DIE_GPF,
+};
+
+#endif /* _ASM_KDEBUG_H */
--- /dev/null
+/* MN10300 kmap_atomic() slot IDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_BIO_DST_IRQ,
+ KM_PTE0,
+ KM_PTE1,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_TYPE_NR
+};
+
+#endif /* _ASM_KMAP_TYPES_H */
--- /dev/null
+/* MN10300 Kernel Probes support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public Licence as published by
+ * the Free Software Foundation; either version 2 of the Licence, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public Licence for more details.
+ *
+ * You should have received a copy of the GNU General Public Licence
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+
+struct kprobe;
+
+typedef unsigned char kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION 0xff
+#define MAX_INSN_SIZE 8
+#define MAX_STACK_SIZE 128
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+ /* copy of original instruction
+ */
+ kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+extern const int kretprobe_blacklist_size;
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+#define flush_insn_slot(p) do {} while (0)
+
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif /* _ASM_KPROBES_H */
--- /dev/null
+/* MN10300 Linkage and calling-convention overrides
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_LINKAGE_H
+#define _ASM_LINKAGE_H
+
+/* don't override anything */
+#define asmlinkage
+
+#define __ALIGN .align 4,0xcb
+#define __ALIGN_STR ".align 4,0xcb"
+
+#endif
--- /dev/null
+#include <asm-generic/local.h>
--- /dev/null
+#include <asm/rtc-regs.h>
--- /dev/null
+/* MN10300 Constants for mmap and co.
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * - Derived from asm-x86/mman.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MMAN_H
+#define _ASM_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_LOCKED 0x2000 /* pages are locked */
+#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+#endif /* _ASM_MMAN_H */
--- /dev/null
+/* MN10300 Memory management context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-frv/mmu.h
+ */
+
+#ifndef _ASM_MMU_H
+#define _ASM_MMU_H
+
+/*
+ * MMU context
+ */
+typedef struct {
+ unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on
+ * each CPU */
+} mm_context_t;
+
+#endif /* _ASM_MMU_H */
--- /dev/null
+/* MN10300 MMU context management
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ * - Derived from include/asm-m32r/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * This implements an algorithm to provide TLB PID mappings to provide
+ * selective access to the TLB for processes, thus reducing the number of TLB
+ * flushes required.
+ *
+ * Note, however, that the M32R algorithm is technically broken as it does not
+ * handle version wrap-around, and could, theoretically, have a problem with a
+ * very long lived program that sleeps long enough for the version number to
+ * wrap all the way around so that its TLB mappings appear valid once again.
+ */
+#ifndef _ASM_MMU_CONTEXT_H
+#define _ASM_MMU_CONTEXT_H
+
+#include <asm/atomic.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm-generic/mm_hooks.h>
+
+#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL
+#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL
+#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL
+#define MMU_NO_CONTEXT 0x00000000UL
+
+extern unsigned long mmu_context_cache[NR_CPUS];
+#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
+
+#define enter_lazy_tlb(mm, tsk) do {} while (0)
+
+#ifdef CONFIG_SMP
+#define cpu_ran_vm(cpu, task) \
+ cpu_set((cpu), (task)->cpu_vm_mask)
+#define cpu_maybe_ran_vm(cpu, task) \
+ cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#else
+#define cpu_ran_vm(cpu, task) do {} while (0)
+#define cpu_maybe_ran_vm(cpu, task) true
+#endif /* CONFIG_SMP */
+
+/*
+ * allocate an MMU context
+ */
+static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
+{
+ unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
+ unsigned long mc = ++(*pmc);
+
+ if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
+ /* we exhausted the TLB PIDs of this version on this CPU, so we
+ * flush this CPU's TLB in its entirety and start new cycle */
+ flush_tlb_all();
+
+ /* fix the TLB version if needed (we avoid version #0 so as to
+ * distingush MMU_NO_CONTEXT) */
+ if (!mc)
+ *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
+ }
+ mm_context(mm) = mc;
+ return mc;
+}
+
+/*
+ * get an MMU context if one is needed
+ */
+static inline unsigned long get_mmu_context(struct mm_struct *mm)
+{
+ unsigned long mc = MMU_NO_CONTEXT, cache;
+
+ if (mm) {
+ cache = mmu_context_cache[smp_processor_id()];
+ mc = mm_context(mm);
+
+ /* if we have an old version of the context, replace it */
+ if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
+ mc = allocate_mmu_context(mm);
+ }
+ return mc;
+}
+
+/*
+ * initialise the context related info for a new mm_struct instance
+ */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ int num_cpus = NR_CPUS, i;
+
+ for (i = 0; i < num_cpus; i++)
+ mm->context.tlbpid[i] = MMU_NO_CONTEXT;
+ return 0;
+}
+
+/*
+ * destroy context related info for an mm_struct that is about to be put to
+ * rest
+ */
+#define destroy_context(mm) do { } while (0)
+
+/*
+ * after we have set current->mm to a new value, this activates the context for
+ * the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, int cpu)
+{
+ PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
+}
+
+/*
+ * change between virtual memory sets
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ int cpu = smp_processor_id();
+
+ if (prev != next) {
+ cpu_ran_vm(cpu, next);
+ activate_context(next, cpu);
+ PTBR = (unsigned long) next->pgd;
+ } else if (!cpu_maybe_ran_vm(cpu, next)) {
+ activate_context(next, cpu);
+ }
+}
+
+#define deactivate_mm(tsk, mm) do {} while (0)
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+#endif /* _ASM_MMU_CONTEXT_H */
--- /dev/null
+/* MN10300 Arch-specific module definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by Mark Salter (msalter@redhat.com)
+ * Derived from include/asm-i386/module.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MODULE_H
+#define _ASM_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/*
+ * Include the MN10300 architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
+
+#endif /* _ASM_MODULE_H */
--- /dev/null
+#ifndef _ASM_MSGBUF_H
+#define _ASM_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+ struct ipc64_perm msg_perm;
+ __kernel_time_t msg_stime; /* last msgsnd time */
+ unsigned long __unused1;
+ __kernel_time_t msg_rtime; /* last msgrcv time */
+ unsigned long __unused2;
+ __kernel_time_t msg_ctime; /* last change time */
+ unsigned long __unused3;
+ unsigned long msg_cbytes; /* current number of bytes on queue */
+ unsigned long msg_qnum; /* number of messages in queue */
+ unsigned long msg_qbytes; /* max number of bytes on queue */
+ __kernel_pid_t msg_lspid; /* pid of last msgsnd */
+ __kernel_pid_t msg_lrpid; /* last receive pid */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+#endif /* _ASM_MSGBUF_H */
--- /dev/null
+/* MN10300 Mutex fastpath
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+#include <asm-generic/mutex-null.h>
--- /dev/null
+/* MN10300 NMI handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_NMI_H
+#define _ASM_NMI_H
+
+#endif /* _ASM_NMI_H */
--- /dev/null
+/* MN10300 Page table definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PAGE_H
+#define _ASM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+
+#ifndef __ASSEMBLY__
+#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+#else
+#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an
+ * immediate val not an addr */
+#define PAGE_MASK +(~(PAGE_SIZE - 1))
+#endif
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page) clear_page(addr)
+#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define PTE_MASK PAGE_MASK
+#define HPAGE_SHIFT 22
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK (~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+#endif
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * This handles the memory map.. We could make this a config
+ * option, but too many people screw it up, and too few need
+ * it.
+ *
+ * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 950MB.
+ */
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size) __attribute__((const));
+static inline int get_order(unsigned long size)
+{
+ int order;
+
+ size = (size - 1) >> (PAGE_SHIFT - 1);
+ order = -1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ return order;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define __PAGE_OFFSET (PAGE_OFFSET_RAW)
+#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET)
+
+/*
+ * main RAM and kernel working space are coincident at 0x90000000, but to make
+ * life more interesting, there's also an uncached virtual shadow at 0xb0000000
+ * - these mappings are fixed in the MMU
+ */
+#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
+
+#define __pa(x) ((unsigned long)(x))
+#define __va(x) ((void *)(unsigned long)(x))
+#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp))
+#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp)
+
+#define pfn_valid(pfn) \
+({ \
+ unsigned long __pfn = (pfn) - __pfn_disp; \
+ __pfn < max_mapnr; \
+})
+
+#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | \
+ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PAGE_H */
--- /dev/null
+/* MN10300 Kernel base address
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ */
+#ifndef _ASM_PAGE_OFFSET_H
+#define _ASM_PAGE_OFFSET_H
+
+#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
+
+#endif
--- /dev/null
+/* MN10300 Kernel parameters
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PARAM_H
+#define _ASM_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ /* Internal kernel timer frequency */
+#define USER_HZ 100 /* .. some user interfaces are in
+ * "ticks" */
+#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE 4096
+
+#ifndef NOGROUP
+#define NOGROUP (-1)
+#endif
+
+#define MAXHOSTNAMELEN 64 /* max length of hostname */
+#define COMMAND_LINE_SIZE 256
+
+#endif /* _ASM_PARAM_H */
--- /dev/null
+/* MN10300 PCI definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PCI_H
+#define _ASM_PCI_H
+
+#ifdef __KERNEL__
+#include <linux/mm.h> /* for struct page */
+
+#if 0
+#define __pcbdebug(FMT, ADDR, ...) \
+ printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
+ (u32)(ADDR), ##__VA_ARGS__)
+
+#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \
+do { \
+ printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \
+ (BUS)->number, \
+ PCI_SLOT(DEVFN), \
+ PCI_FUNC(DEVFN), \
+ (u32)(WHERE), ##__VA_ARGS__); \
+} while (0)
+
+#else
+#define __pcbdebug(FMT, ADDR, ...) do {} while (0)
+#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0)
+#endif
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes or
+ * architectures with incomplete PCI setup by the loader */
+
+#ifdef CONFIG_PCI
+#define pcibios_assign_all_busses() 1
+extern void unit_pci_init(void);
+#else
+#define pcibios_assign_all_busses() 0
+#endif
+
+extern unsigned long pci_mem_start;
+#define PCIBIOS_MIN_IO 0xBE000004
+#define PCIBIOS_MIN_MEM 0xB8000000
+
+void pcibios_set_master(struct pci_dev *dev);
+void pcibios_penalize_isa_irq(int irq);
+
+/* Dynamic DMA mapping stuff.
+ * i386 has everything mapped statically.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+
+struct pci_dev;
+
+/* The PCI address space does equal the physical memory
+ * address space. The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS (1)
+
+
+/* This is always fine. */
+#define pci_dac_dma_supported(pci_dev, mask) (0)
+
+/* Return the index of the PCI controller for device. */
+static inline int pci_controller_num(struct pci_dev *dev)
+{
+ return 0;
+}
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state,
+ int write_combine);
+
+#endif /* __KERNEL__ */
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/**
+ * pcibios_resource_to_bus - convert resource to PCI bus address
+ * @dev: device which owns this resource
+ * @region: converted bus-centric region (start,end)
+ * @res: resource to convert
+ *
+ * Convert a resource to a PCI device bus address or bus window.
+ */
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+ struct pci_bus_region *region,
+ struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+ struct resource *res,
+ struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+
+ return root;
+}
+
+#define pcibios_scan_all_fns(a, b) 0
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+ return channel ? 15 : 14;
+}
+
+#endif /* _ASM_PCI_H */
--- /dev/null
+#include <asm-generic/percpu.h>
--- /dev/null
+/* MN10300 Page and page table/directory allocation
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PGALLOC_H
+#define _ASM_PGALLOC_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/threads.h>
+#include <linux/mm.h> /* for struct page */
+
+struct mm_struct;
+struct page;
+
+/* attach a page table to a PMD entry */
+#define pmd_populate_kernel(mm, pmd, pte) \
+ set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
+
+static inline
+void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
+{
+ set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *);
+extern void pgd_free(struct mm_struct *, pgd_t *);
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
+extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+ __free_page(pte);
+}
+
+
+#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+
+#endif /* _ASM_PGALLOC_H */
--- /dev/null
+/* MN10300 Page table manipulators and constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ *
+ *
+ * The Linux memory management assumes a three-level page table setup. On
+ * the i386, we use that, but "fold" the mid level into the top-level page
+ * table, so that we physically have the same two-level page table as the
+ * i386 mmu expects.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the i386 page table tree for the purposes of the MN10300 TLB handler
+ * functions.
+ */
+#ifndef _ASM_PGTABLE_H
+#define _ASM_PGTABLE_H
+
+#include <asm/cpu-regs.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <linux/threads.h>
+
+#include <asm/bitops.h>
+
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+extern unsigned long empty_zero_page[1024];
+extern spinlock_t pgd_lock;
+extern struct page *pgd_list;
+
+extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The Linux mn10300 paging architecture only implements both the traditional
+ * 2-level page tables
+ */
+#define PGDIR_SHIFT 22
+#define PTRS_PER_PGD 1024
+#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */
+#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */
+#define PTRS_PER_PTE 1024
+
+#define PGD_SIZE PAGE_SIZE
+#define PMD_SIZE (1UL << PMD_SHIFT)
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE - 1))
+
+#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS 0
+
+#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS)
+
+#define TWOLEVEL_PGDIR_SHIFT 22
+#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
+#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS)
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+#endif
+
+/*
+ * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
+ * area has to be in the lower half of the virtual address range (the upper
+ * half is not translated through the TLB).
+ *
+ * So in this case, the vmalloc area goes at the bottom of the address map
+ * (leaving a hole at the very bottom to catch addressing errors), and
+ * userspace starts immediately above.
+ *
+ * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
+ * area to catch addressing errors.
+ */
+#define VMALLOC_OFFSET (8 * 1024 * 1024)
+#define VMALLOC_START (0x70000000)
+#define VMALLOC_END (0x7C000000)
+
+#ifndef __ASSEMBLY__
+extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
+#endif
+
+/* IPTEL/DPTEL bit assignments */
+#define _PAGE_BIT_VALID xPTEL_V_BIT
+#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */
+#define _PAGE_BIT_CACHE xPTEL_C_BIT
+#define _PAGE_BIT_PRESENT xPTEL_PV_BIT
+#define _PAGE_BIT_DIRTY xPTEL_D_BIT
+#define _PAGE_BIT_GLOBAL xPTEL_G_BIT
+
+#define _PAGE_VALID xPTEL_V
+#define _PAGE_ACCESSED xPTEL_UNUSED1
+#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */
+#define _PAGE_CACHE xPTEL_C
+#define _PAGE_PRESENT xPTEL_PV
+#define _PAGE_DIRTY xPTEL_D
+#define _PAGE_PROT xPTEL_PR
+#define _PAGE_PROT_RKNU xPTEL_PR_ROK
+#define _PAGE_PROT_WKNU xPTEL_PR_RWK
+#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU
+#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU
+#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU
+#define _PAGE_GLOBAL xPTEL_G
+#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */
+
+#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */
+
+#define __PAGE_PROT_UWAUX 0x040
+#define __PAGE_PROT_USER 0x080
+#define __PAGE_PROT_WRITE 0x100
+
+#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID)
+#define _PAGE_PROTNONE 0x000 /* If not present */
+
+#ifndef __ASSEMBLY__
+
+#define VMALLOC_VMADDR(x) ((unsigned long)(x))
+
+#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
+
+#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX)
+#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX)
+#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX)
+#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX)
+#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED)
+#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY)
+#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY)
+#define PAGE_COPY PAGE_COPY_NOEXEC
+#define PAGE_READONLY PAGE_READONLY_NOEXEC
+#define PAGE_SHARED PAGE_SHARED_EXEC
+
+#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
+
+#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
+#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX)
+#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
+#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
+#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
+
+#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
+#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
+#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
+
+/*
+ * Whilst the MN10300 can do page protection for execute (given separate data
+ * and insn TLBs), we are not supporting it at the moment. Write permission,
+ * however, always implies read permission (but not execute permission).
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY_NOEXEC
+#define __P010 PAGE_COPY_NOEXEC
+#define __P011 PAGE_COPY_NOEXEC
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY_NOEXEC
+#define __S010 PAGE_SHARED_NOEXEC
+#define __S011 PAGE_SHARED_NOEXEC
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/*
+ * Define this to warn about kernel memory accesses that are
+ * done without a 'verify_area(VERIFY_WRITE,..)'
+ */
+#undef TEST_VERIFY_AREA
+
+#define pte_present(x) (pte_val(x) & _PAGE_VALID)
+#define pte_clear(mm, addr, xp) \
+do { \
+ set_pte_at((mm), (addr), (xp), __pte(0)); \
+} while (0)
+
+#define pmd_none(x) (!pmd_val(x))
+#define pmd_present(x) (!pmd_none(x))
+#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+#define pmd_bad(x) 0
+
+
+#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; }
+static inline int pte_special(pte_t pte){ return 0; }
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
+
+static inline pte_t pte_rdprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
+}
+static inline pte_t pte_exprotect(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_NX; return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; }
+
+static inline pte_t pte_mkread(pte_t pte)
+{
+ pte_val(pte) |= __PAGE_PROT_USER;
+ if (pte_write(pte))
+ pte_val(pte) |= __PAGE_PROT_UWAUX;
+ return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= __PAGE_PROT_WRITE;
+ if (pte_val(pte) & __PAGE_PROT_USER)
+ pte_val(pte) |= __PAGE_PROT_UWAUX;
+ return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+#define pte_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_clear(xp) do { } while (0)
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified. Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval))
+#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval))
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define ptep_get_and_clear(mm, addr, ptep) \
+ __pte(xchg(&(ptep)->pte, 0))
+#define pte_same(a, b) (pte_val(a) == pte_val(b))
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+#define pte_none(x) (!pte_val(x))
+#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
+#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT)
+#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot))
+
+/*
+ * All present user pages are user-executable:
+ */
+static inline int pte_exec(pte_t pte)
+{
+ return pte_user(pte);
+}
+
+/*
+ * All present pages are kernel-executable:
+ */
+static inline int pte_exec_kernel(pte_t pte)
+{
+ return 1;
+}
+
+/*
+ * Bits 0 and 1 are taken, split up the 29 bits of offset
+ * into this range:
+ */
+#define PTE_FILE_MAX_BITS 29
+
+#define pte_to_pgoff(pte) (pte_val(pte) >> 2)
+#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
+
+/* Encode and de-code a swap entry */
+#define __swp_type(x) (((x).val >> 2) & 0x3f)
+#define __swp_offset(x) ((x).val >> 8)
+#define __swp_entry(type, offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x) __pte((x).val)
+
+static inline
+int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ if (!pte_dirty(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+static inline
+int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
+ pte_t *ptep)
+{
+ if (!pte_young(*ptep))
+ return 0;
+ return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
+}
+
+static inline
+void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+ pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
+}
+
+static inline void ptep_mkdirty(pte_t *ptep)
+{
+ set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
+}
+
+/*
+ * Macro to mark a page protection value as "uncacheable". On processors which
+ * do not support it, this is a no-op.
+ */
+#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+#define mk_pte_huge(entry) \
+ ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ pte_val(pte) &= _PAGE_CHG_MASK;
+ pte_val(pte) |= pgprot_val(newprot);
+ return pte;
+}
+
+#define page_pte(page) page_pte_prot((page), __pgprot(0))
+
+#define pmd_page_kernel(pmd) \
+ ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+
+#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+#define pmd_large(pmd) \
+ ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
+ (_PAGE_PSE | _PAGE_PRESENT))
+
+/*
+ * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * this macro returns the index of the entry in the pgd page which would
+ * control the given virtual address
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * a shortcut which implies the use of the kernel's pgd, instead
+ * of a process's
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * this macro returns the index of the entry in the pmd page which would
+ * control the given virtual address
+ */
+#define pmd_index(address) \
+ (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
+
+/*
+ * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * this macro returns the index of the entry in the pte page which would
+ * control the given virtual address
+ */
+#define pte_index(address) \
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, address) \
+ ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address))
+
+/*
+ * Make a given kernel text page executable/non-executable.
+ * Returns the previous executability setting of that page (which
+ * is used to restore the previous state). Used by the SMP bootup code.
+ * NOTE: this is an __init function for security reasons.
+ */
+static inline int set_kernel_exec(unsigned long vaddr, int enable)
+{
+ return 0;
+}
+
+#define pte_offset_map(dir, address) \
+ ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do {} while (0)
+#define pte_unmap_nested(pte) do {} while (0)
+
+/*
+ * The MN10300 has external MMU info in the form of a TLB: this is adapted from
+ * the kernel page tables containing the necessary information by tlb-mn10300.S
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t pte);
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr) (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
+
+#define MK_IOSPACE_PFN(space, pfn) (pfn)
+#define GET_IOSPACE(pfn) 0
+#define GET_PFN(pfn) (pfn)
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTEP_MKDIRTY
+#define __HAVE_ARCH_PTE_SAME
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_PGTABLE_H */
--- /dev/null
+/* MN10300 On-board I/O port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PIO_REGS_H
+#define _ASM_PIO_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* I/O port 0 */
+#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */
+#define P0MD_0 0x0003 /* mask */
+#define P0MD_0_IN 0x0000 /* input mode */
+#define P0MD_0_OUT 0x0001 /* output mode */
+#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */
+#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */
+#define P0MD_1 0x000c
+#define P0MD_1_IN 0x0000
+#define P0MD_1_OUT 0x0004
+#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */
+#define P0MD_1_EYED 0x000c /* test signal output (data) */
+#define P0MD_2 0x0030
+#define P0MD_2_IN 0x0000
+#define P0MD_2_OUT 0x0010
+#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */
+#define P0MD_3 0x00c0
+#define P0MD_3_IN 0x0000
+#define P0MD_3_OUT 0x0040
+#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */
+#define P0MD_4 0x0300
+#define P0MD_4_IN 0x0000
+#define P0MD_4_OUT 0x0100
+#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */
+#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */
+#define P0MD_5 0x0c00
+#define P0MD_5_IN 0x0000
+#define P0MD_5_OUT 0x0400
+#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */
+#define P0MD_6 0x3000
+#define P0MD_6_IN 0x0000
+#define P0MD_6_OUT 0x1000
+#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */
+#define P0MD_7 0xc000
+#define P0MD_7_IN 0x0000
+#define P0MD_7_OUT 0x4000
+#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */
+
+#define P0IN __SYSREG(0xdb000004, u8) /* in reg */
+#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */
+
+#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */
+#define P0TMIO_TM0_IN 0x00
+#define P0TMIO_TM0_OUT 0x01
+#define P0TMIO_TM1_IN 0x00
+#define P0TMIO_TM1_OUT 0x02
+#define P0TMIO_TM2_IN 0x00
+#define P0TMIO_TM2_OUT 0x04
+#define P0TMIO_TM3_IN 0x00
+#define P0TMIO_TM3_OUT 0x08
+#define P0TMIO_TM4_IN 0x00
+#define P0TMIO_TM4_OUT 0x10
+#define P0TMIO_TM5_IN 0x00
+#define P0TMIO_TM5_OUT 0x20
+#define P0TMIO_TM6A_IN 0x00
+#define P0TMIO_TM6A_OUT 0x40
+#define P0TMIO_TM6B_IN 0x00
+#define P0TMIO_TM6B_OUT 0x80
+
+/* I/O port 1 */
+#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */
+#define P1MD_0 0x0003 /* mask */
+#define P1MD_0_IN 0x0000 /* input mode */
+#define P1MD_0_OUT 0x0001 /* output mode */
+#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */
+#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */
+#define P1MD_1 0x000c
+#define P1MD_1_IN 0x0000
+#define P1MD_1_OUT 0x0004
+#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */
+#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */
+#define P1MD_2 0x0030
+#define P1MD_2_IN 0x0000
+#define P1MD_2_OUT 0x0010
+#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */
+#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */
+#define P1MD_3 0x00c0
+#define P1MD_3_IN 0x0000
+#define P1MD_3_OUT 0x0040
+#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */
+#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */
+#define P1MD_4 0x0300
+#define P1MD_4_IN 0x0000
+#define P1MD_4_OUT 0x0100
+#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */
+#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */
+
+#define P1IN __SYSREG(0xdb000104, u8) /* in reg */
+#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */
+#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */
+#define P1TMIO_TM11_IN 0x00
+#define P1TMIO_TM11_OUT 0x01
+#define P1TMIO_TM10_IN 0x00
+#define P1TMIO_TM10_OUT 0x02
+#define P1TMIO_TM9_IN 0x00
+#define P1TMIO_TM9_OUT 0x04
+#define P1TMIO_TM8_IN 0x00
+#define P1TMIO_TM8_OUT 0x08
+#define P1TMIO_TM7_IN 0x00
+#define P1TMIO_TM7_OUT 0x10
+
+/* I/O port 2 */
+#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */
+#define P2MD_0 0x0003 /* mask */
+#define P2MD_0_IN 0x0000 /* input mode */
+#define P2MD_0_OUT 0x0001 /* output mode */
+#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */
+#define P2MD_1 0x000c
+#define P2MD_1_IN 0x0000
+#define P2MD_1_OUT 0x0004
+#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */
+#define P2MD_2 0x0030
+#define P2MD_2_IN 0x0000
+#define P2MD_2_OUT 0x0010
+#define P2MD_3 0x00c0
+#define P2MD_3_IN 0x0000
+#define P2MD_3_OUT 0x0040
+#define P2MD_3_CKIO 0x00c0 /* mode */
+#define P2MD_4 0x0300
+#define P2MD_4_IN 0x0000
+#define P2MD_4_OUT 0x0100
+#define P2MD_4_CMOD 0x0300 /* mode */
+
+#define P2IN __SYSREG(0xdb000204, u8) /* in reg */
+#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */
+#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */
+
+/* I/O port 3 */
+#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */
+#define P3MD_0 0x0003 /* mask */
+#define P3MD_0_IN 0x0000 /* input mode */
+#define P3MD_0_OUT 0x0001 /* output mode */
+#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */
+#define P3MD_1 0x000c
+#define P3MD_1_IN 0x0000
+#define P3MD_1_OUT 0x0004
+#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */
+#define P3MD_2 0x0030
+#define P3MD_2_IN 0x0000
+#define P3MD_2_OUT 0x0010
+#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */
+#define P3MD_3 0x00c0
+#define P3MD_3_IN 0x0000
+#define P3MD_3_OUT 0x0040
+#define P3MD_3_AFFS 0x0080 /* AFR interface mode */
+#define P3MD_4 0x0300
+#define P3MD_4_IN 0x0000
+#define P3MD_4_OUT 0x0100
+#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */
+
+#define P3IN __SYSREG(0xdb000304, u8) /* in reg */
+#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */
+
+/* I/O port 4 */
+#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */
+#define P4MD_0 0x0003 /* mask */
+#define P4MD_0_IN 0x0000 /* input mode */
+#define P4MD_0_OUT 0x0001 /* output mode */
+#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */
+#define P4MD_1 0x000c
+#define P4MD_1_IN 0x0000
+#define P4MD_1_OUT 0x0004
+#define P4MD_1_SDA0 0x0008
+#define P4MD_2 0x0030
+#define P4MD_2_IN 0x0000
+#define P4MD_2_OUT 0x0010
+#define P4MD_2_SCL1 0x0020
+#define P4MD_3 0x00c0
+#define P4MD_3_IN 0x0000
+#define P4MD_3_OUT 0x0040
+#define P4MD_3_SDA1 0x0080
+#define P4MD_4 0x0300
+#define P4MD_4_IN 0x0000
+#define P4MD_4_OUT 0x0100
+#define P4MD_4_SBO0 0x0200
+#define P4MD_5 0x0c00
+#define P4MD_5_IN 0x0000
+#define P4MD_5_OUT 0x0400
+#define P4MD_5_SBO1 0x0800
+#define P4MD_6 0x3000
+#define P4MD_6_IN 0x0000
+#define P4MD_6_OUT 0x1000
+#define P4MD_6_SBT0 0x2000
+#define P4MD_7 0xc000
+#define P4MD_7_IN 0x0000
+#define P4MD_7_OUT 0x4000
+#define P4MD_7_SBT1 0x8000
+
+#define P4IN __SYSREG(0xdb000404, u8) /* in reg */
+#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */
+
+/* I/O port 5 */
+#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */
+#define P5MD_0 0x0003 /* mask */
+#define P5MD_0_IN 0x0000 /* input mode */
+#define P5MD_0_OUT 0x0001 /* output mode */
+#define P5MD_0_IRTXD 0x0002 /* IrDA mode */
+#define P5MD_0_SOUT 0x0004 /* serial mode */
+#define P5MD_1 0x000c
+#define P5MD_1_IN 0x0000
+#define P5MD_1_OUT 0x0004
+#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */
+#define P5MD_1_SIN 0x000c /* serial mode */
+#define P5MD_2 0x0030
+#define P5MD_2_IN 0x0000
+#define P5MD_2_OUT 0x0010
+#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */
+
+#define P5IN __SYSREG(0xdb000504, u8) /* in reg */
+#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PIO_REGS_H */
--- /dev/null
+#include <asm-generic/poll.h>
--- /dev/null
+/* MN10300 POSIX types
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_POSIX_TYPES_H
+#define _ASM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc. Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long __kernel_ino_t;
+typedef unsigned short __kernel_mode_t;
+typedef unsigned short __kernel_nlink_t;
+typedef long __kernel_off_t;
+typedef int __kernel_pid_t;
+typedef unsigned short __kernel_ipc_pid_t;
+typedef unsigned short __kernel_uid_t;
+typedef unsigned short __kernel_gid_t;
+typedef unsigned long __kernel_size_t;
+typedef long __kernel_ssize_t;
+typedef int __kernel_ptrdiff_t;
+typedef long __kernel_time_t;
+typedef long __kernel_suseconds_t;
+typedef long __kernel_clock_t;
+typedef int __kernel_timer_t;
+typedef int __kernel_clockid_t;
+typedef int __kernel_daddr_t;
+typedef char * __kernel_caddr_t;
+typedef unsigned short __kernel_uid16_t;
+typedef unsigned short __kernel_gid16_t;
+typedef unsigned int __kernel_uid32_t;
+typedef unsigned int __kernel_gid32_t;
+
+typedef unsigned short __kernel_old_uid_t;
+typedef unsigned short __kernel_old_gid_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long __kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+ int val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+ int __val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+ unsigned long __tmp = __fd / __NFDBITS;
+ unsigned long __rem = __fd % __NFDBITS;
+ return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *__p)
+{
+ unsigned long *__tmp = __p->fds_bits;
+ int __i;
+
+ if (__builtin_constant_p(__FDSET_LONGS)) {
+ switch (__FDSET_LONGS) {
+ case 16:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ __tmp[ 8] = 0; __tmp[ 9] = 0;
+ __tmp[10] = 0; __tmp[11] = 0;
+ __tmp[12] = 0; __tmp[13] = 0;
+ __tmp[14] = 0; __tmp[15] = 0;
+ return;
+
+ case 8:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ __tmp[ 4] = 0; __tmp[ 5] = 0;
+ __tmp[ 6] = 0; __tmp[ 7] = 0;
+ return;
+
+ case 4:
+ __tmp[ 0] = 0; __tmp[ 1] = 0;
+ __tmp[ 2] = 0; __tmp[ 3] = 0;
+ return;
+ }
+ }
+ __i = __FDSET_LONGS;
+ while (__i) {
+ __i--;
+ *__tmp = 0;
+ __tmp++;
+ }
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* _ASM_POSIX_TYPES_H */
--- /dev/null
+/* MN10300 Processor specifics
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROCESSOR_H
+#define _ASM_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/cpu-regs.h>
+#include <linux/threads.h>
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() \
+({ \
+ void *__pc; \
+ asm("mov pc,%0" : "=a"(__pc)); \
+ __pc; \
+})
+
+extern void show_registers(struct pt_regs *regs);
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+struct mn10300_cpuinfo {
+ int type;
+ unsigned long loops_per_sec;
+ char hard_math;
+ unsigned long *pgd_quick;
+ unsigned long *pte_quick;
+ unsigned long pgtable_cache_sz;
+};
+
+extern struct mn10300_cpuinfo boot_cpu_data;
+
+#define cpu_data &boot_cpu_data
+#define current_cpu_data boot_cpu_data
+
+extern void identify_cpu(struct mn10300_cpuinfo *);
+extern void print_cpu_info(struct mn10300_cpuinfo *);
+extern void dodgy_tsc(void);
+#define cpu_relax() barrier()
+
+/*
+ * User space process size: 1.75GB (default).
+ */
+#define TASK_SIZE 0x70000000
+
+/*
+ * Where to put the userspace stack by default
+ */
+#define STACK_TOP 0x70000000
+#define STACK_TOP_MAX STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE 0x30000000
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+struct fpu_state_struct {
+ unsigned long fs[32]; /* fpu registers */
+ unsigned long fpcr; /* fpu control register */
+};
+
+struct thread_struct {
+ struct pt_regs *uregs; /* userspace register frame */
+ unsigned long pc; /* kernel PC */
+ unsigned long sp; /* kernel SP */
+ unsigned long a3; /* kernel FP */
+ unsigned long wchan;
+ unsigned long usp;
+ struct pt_regs *__frame;
+ unsigned long fpu_flags;
+#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */
+ struct fpu_state_struct fpu_state;
+};
+
+#define INIT_THREAD \
+{ \
+ .uregs = init_uregs, \
+ .pc = 0, \
+ .sp = 0, \
+ .a3 = 0, \
+ .wchan = 0, \
+ .__frame = NULL, \
+}
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
+ NULL, NULL }
+
+/*
+ * do necessary setup to start up a newly executed thread
+ * - need to discard the frame stacked by the kernel thread invoking the execve
+ * syscall (see RESTORE_ALL macro)
+ */
+#define start_thread(regs, new_pc, new_sp) do { \
+ set_fs(USER_DS); \
+ __frame = current->thread.uregs; \
+ __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \
+ __frame->pc = new_pc; \
+ __frame->sp = new_sp; \
+} while (0)
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define task_pt_regs(task) \
+({ \
+ struct pt_regs *__regs__; \
+ __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
+ __regs__ - 1; \
+})
+
+#define KSTK_EIP(task) (task_pt_regs(task)->pc)
+#define KSTK_ESP(task) (task_pt_regs(task)->sp)
+
+#define KSTK_TOP(info) \
+({ \
+ (unsigned long)(info) + THREAD_SIZE; \
+})
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+
+static inline void prefetch(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+ asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+static inline void prefetchw(const void *x)
+{
+#ifndef CONFIG_MN10300_CACHE_DISABLED
+#ifdef CONFIG_MN10300_PROC_MN103E010
+ asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
+#else
+ asm volatile ("dcpf (%0)" : : "r"(x));
+#endif
+#endif
+}
+
+#endif /* _ASM_PROCESSOR_H */
--- /dev/null
+/* MN10300 Exception frame layout and ptrace constants
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PTRACE_H
+#define _ASM_PTRACE_H
+
+#define PT_A3 0
+#define PT_A2 1
+#define PT_D3 2
+#define PT_D2 3
+#define PT_MCVF 4
+#define PT_MCRL 5
+#define PT_MCRH 6
+#define PT_MDRQ 7
+#define PT_E1 8
+#define PT_E0 9
+#define PT_E7 10
+#define PT_E6 11
+#define PT_E5 12
+#define PT_E4 13
+#define PT_E3 14
+#define PT_E2 15
+#define PT_SP 16
+#define PT_LAR 17
+#define PT_LIR 18
+#define PT_MDR 19
+#define PT_A1 20
+#define PT_A0 21
+#define PT_D1 22
+#define PT_D0 23
+#define PT_ORIG_D0 24
+#define PT_EPSW 25
+#define PT_PC 26
+#define NR_PTREGS 27
+
+#ifndef __ASSEMBLY__
+/*
+ * This defines the way registers are stored in the event of an exception
+ * - the strange order is due to the MOVM instruction
+ */
+struct pt_regs {
+ unsigned long a3; /* syscall arg 3 */
+ unsigned long a2; /* syscall arg 4 */
+ unsigned long d3; /* syscall arg 5 */
+ unsigned long d2; /* syscall arg 6 */
+ unsigned long mcvf;
+ unsigned long mcrl;
+ unsigned long mcrh;
+ unsigned long mdrq;
+ unsigned long e1;
+ unsigned long e0;
+ unsigned long e7;
+ unsigned long e6;
+ unsigned long e5;
+ unsigned long e4;
+ unsigned long e3;
+ unsigned long e2;
+ unsigned long sp;
+ unsigned long lar;
+ unsigned long lir;
+ unsigned long mdr;
+ unsigned long a1;
+ unsigned long a0; /* syscall arg 1 */
+ unsigned long d1; /* syscall arg 2 */
+ unsigned long d0; /* syscall ret */
+ struct pt_regs *next; /* next frame pointer */
+ unsigned long orig_d0; /* syscall number */
+ unsigned long epsw;
+ unsigned long pc;
+};
+#endif
+
+extern struct pt_regs *__frame; /* current frame pointer */
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+/* options set using PTRACE_SETOPTIONS */
+#define PTRACE_O_TRACESYSGOOD 0x00000001
+
+#if defined(__KERNEL__)
+
+#if !defined(__ASSEMBLY__)
+#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
+#define instruction_pointer(regs) ((regs)->pc)
+extern void show_regs(struct pt_regs *);
+#endif /* !__ASSEMBLY */
+
+#define profile_pc(regs) ((regs)->pc)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PTRACE_H */
--- /dev/null
+/* MN10300 Reset controller and watchdog timer definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_RESET_REGS_H
+#define _ASM_RESET_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_MN10300_WD_TIMER
+#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
+#endif
+
+/*
+ * watchdog timer registers
+ */
+#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
+
+#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */
+#define WDCTR_WDCK 0x07 /* clock source selection */
+#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */
+#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */
+#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */
+#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */
+#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */
+#define WDCTR_WDRST 0x40 /* binary counter reset */
+#define WDCTR_WDCNE 0x80 /* watchdog timer enable */
+
+#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */
+#define RSTCTR_CHIPRST 0x01 /* chip reset */
+#define RSTCTR_DBFRST 0x02 /* double fault reset flag */
+#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */
+#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */
+
+#ifndef __ASSEMBLY__
+
+static inline void mn10300_proc_hard_reset(void)
+{
+ RSTCTR &= ~RSTCTR_CHIPRST;
+ RSTCTR |= RSTCTR_CHIPRST;
+}
+
+extern unsigned int watchdog_alert_counter;
+
+extern void watchdog_go(void);
+extern asmlinkage void watchdog_handler(void);
+extern asmlinkage
+void watchdog_interrupt(struct pt_regs *, enum exception_code);
+
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RESET_REGS_H */
--- /dev/null
+#include <asm-generic/resource.h>
--- /dev/null
+/* MN10300 on-chip Real-Time Clock registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_REGS_H
+#define _ASM_RTC_REGS_H
+
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
+#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
+#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
+#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
+#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */
+#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
+#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
+#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */
+#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */
+#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */
+
+#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */
+#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */
+#define RTCRA_RS_NONE 0x00 /* - off */
+#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */
+#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */
+#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */
+#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */
+#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */
+#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */
+#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */
+#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */
+#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */
+#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */
+#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */
+#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */
+#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */
+#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */
+#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */
+#define RTCRA_DVR 0x40 /* divider reset */
+#define RTCRA_UIP 0x80 /* clock update flag */
+
+#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */
+#define RTCRB_DSE 0x01 /* daylight savings time enable */
+#define RTCRB_TM 0x02 /* time format */
+#define RTCRB_TM_12HR 0x00 /* - 12 hour format */
+#define RTCRB_TM_24HR 0x02 /* - 24 hour format */
+#define RTCRB_DM 0x04 /* numeric value format */
+#define RTCRB_DM_BCD 0x00 /* - BCD */
+#define RTCRB_DM_BINARY 0x04 /* - binary */
+#define RTCRB_UIE 0x10 /* update interrupt disable */
+#define RTCRB_AIE 0x20 /* alarm interrupt disable */
+#define RTCRB_PIE 0x40 /* periodic interrupt disable */
+#define RTCRB_SET 0x80 /* clock update enable */
+
+#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */
+#define RTSRC_UF 0x10 /* update end interrupt flag */
+#define RTSRC_AF 0x20 /* alarm interrupt flag */
+#define RTSRC_PF 0x40 /* periodic interrupt flag */
+#define RTSRC_IRQF 0x80 /* interrupt flag */
+
+#define RTIRQ 32
+#define RTICR GxICR(RTIRQ)
+
+/*
+ * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
+ */
+#define RTC_PORT(x) 0xd8600000
+#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
+
+#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8)
+#define CMOS_WRITE(val, addr) \
+ do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
+
+#define RTC_IRQ RTIRQ
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_RTC_REGS_H */
--- /dev/null
+/* MN10300 Real time clock definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef CONFIG_MN10300_RTC
+
+#include <linux/init.h>
+
+extern void check_rtc_time(void);
+extern void __init calibrate_clock(void);
+extern unsigned long __init get_initial_rtc_time(void);
+
+#else /* !CONFIG_MN10300_RTC */
+
+static inline void check_rtc_time(void)
+{
+}
+
+static inline void calibrate_clock(void)
+{
+}
+
+static inline unsigned long get_initial_rtc_time(void)
+{
+ return 0;
+}
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#include <asm-generic/rtc.h>
+
+#endif /* _ASM_RTC_H */
--- /dev/null
+/* MN10300 Scatterlist definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SCATTERLIST_H
+#define _ASM_SCATTERLIST_H
+
+#include <asm/types.h>
+
+/*
+ * Drivers must set either ->address or (preferred) page and ->offset
+ * to indicate where data must be transferred to/from.
+ *
+ * Using page is recommended since it handles highmem data as well as
+ * low mem. ->address is restricted to data which has a virtual mapping, and
+ * it will go away in the future. Updating to page can be automated very
+ * easily -- something like
+ *
+ * sg->address = some_ptr;
+ *
+ * can be rewritten as
+ *
+ * sg_set_page(virt_to_page(some_ptr));
+ * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
+ *
+ * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
+ */
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+ unsigned long sg_magic;
+#endif
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+ dma_addr_t dma_address;
+ unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg) ((sg)->dma_address)
+#define sg_dma_len(sg) ((sg)->length)
+
+#endif /* _ASM_SCATTERLIST_H */
--- /dev/null
+#include <asm-generic/sections.h>
--- /dev/null
+#ifndef _ASM_SEMBUF_H
+#define _ASM_SEMBUF_H
+
+/*
+ * The semid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+ struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
+ __kernel_time_t sem_otime; /* last semop time */
+ unsigned long __unused1;
+ __kernel_time_t sem_ctime; /* last change time */
+ unsigned long __unused2;
+ unsigned long sem_nsems; /* no. of semaphores in array */
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SEMBUF_H */
--- /dev/null
+/* MN10300 on-board serial port module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SERIAL_REGS_H
+#define _ASM_SERIAL_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* serial port 0 */
+#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
+#define SC01CTR_CK 0x0007 /* clock source select */
+#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
+#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
+#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
+#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
+#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
+#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
+#define SC01CTR_STB 0x0008 /* stop bit select */
+#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
+#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
+#define SC01CTR_PB 0x0070 /* parity bit select */
+#define SC01CTR_PB_NONE 0x0000 /* - no parity */
+#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
+#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
+#define SC01CTR_PB_EVEN 0x0060 /* - even parity */
+#define SC01CTR_PB_ODD 0x0070 /* - odd parity */
+#define SC01CTR_CLN 0x0080 /* character length */
+#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
+#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
+#define SC01CTR_TOE 0x0100 /* T input output enable */
+#define SC01CTR_OD 0x0200 /* bit order select */
+#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */
+#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */
+#define SC01CTR_MD 0x0c00 /* mode select */
+#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */
+#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */
+#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */
+#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */
+#define SC01CTR_IIC 0x1000 /* I2C mode select */
+#define SC01CTR_BKE 0x2000 /* break transmit enable */
+#define SC01CTR_RXE 0x4000 /* receive enable */
+#define SC01CTR_TXE 0x8000 /* transmit enable */
+
+#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */
+#define SC01ICR_DMD 0x80 /* output data mode */
+#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */
+#define SC01ICR_TI 0x10 /* transmit interrupt cause */
+#define SC01ICR_RES 0x04 /* receive error select */
+#define SC01ICR_RI 0x01 /* receive interrupt cause */
+
+#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */
+#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */
+
+#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */
+#define SC01STR_OEF 0x0001 /* overrun error found */
+#define SC01STR_PEF 0x0002 /* parity error found */
+#define SC01STR_FEF 0x0004 /* framing error found */
+#define SC01STR_RBF 0x0010 /* receive buffer status */
+#define SC01STR_TBF 0x0020 /* transmit buffer status */
+#define SC01STR_RXF 0x0040 /* receive status */
+#define SC01STR_TXF 0x0080 /* transmit status */
+#define SC01STR_STF 0x0100 /* I2C start sequence found */
+#define SC01STR_SPF 0x0200 /* I2C stop sequence found */
+
+#define SC0RXIRQ 20 /* timer 0 Receive IRQ */
+#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */
+
+#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
+#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
+
+/* serial port 1 */
+#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */
+#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */
+#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
+#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
+#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */
+
+#define SC1RXIRQ 22 /* timer 1 Receive IRQ */
+#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */
+
+#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
+#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
+
+/* serial port 2 */
+#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
+#define SC2CTR_CK 0x0003 /* clock source select */
+#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
+#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
+#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
+#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
+#define SC2CTR_STB 0x0008 /* stop bit select */
+#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
+#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
+#define SC2CTR_PB 0x0070 /* parity bit select */
+#define SC2CTR_PB_NONE 0x0000 /* - no parity */
+#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
+#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
+#define SC2CTR_PB_EVEN 0x0060 /* - even parity */
+#define SC2CTR_PB_ODD 0x0070 /* - odd parity */
+#define SC2CTR_CLN 0x0080 /* character length */
+#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
+#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
+#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */
+#define SC2CTR_OD 0x0200 /* bit order select */
+#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */
+#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */
+#define SC2CTR_TWS 0x1000 /* transmit wait select */
+#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */
+#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */
+#define SC2CTR_BKE 0x2000 /* break transmit enable */
+#define SC2CTR_RXE 0x4000 /* receive enable */
+#define SC2CTR_TXE 0x8000 /* transmit enable */
+
+#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */
+#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */
+#define SC2ICR_TI 0x10 /* transmit interrupt cause */
+#define SC2ICR_RES 0x04 /* receive error select */
+#define SC2ICR_RI 0x01 /* receive interrupt cause */
+
+#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
+#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
+#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
+#define SC2STR_OEF 0x0001 /* overrun error found */
+#define SC2STR_PEF 0x0002 /* parity error found */
+#define SC2STR_FEF 0x0004 /* framing error found */
+#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */
+#define SC2STR_RBF 0x0010 /* receive buffer status */
+#define SC2STR_TBF 0x0020 /* transmit buffer status */
+#define SC2STR_RXF 0x0040 /* receive status */
+#define SC2STR_TXF 0x0080 /* transmit status */
+
+#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
+
+#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
+#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
+
+#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
+#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SERIAL_REGS_H */
--- /dev/null
+/* Standard UART definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+/*
+ * The ASB2305 has an 18.432 MHz clock the UART
+ */
+#define BASE_BAUD (18432000 / 16)
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#ifdef CONFIG_SERIAL_MANY_PORTS
+#define FOURPORT_FLAGS ASYNC_FOURPORT
+#define ACCENT_FLAGS 0
+#define BOCA_FLAGS 0
+#define HUB6_FLAGS 0
+#define RS_TABLE_SIZE 64
+#else
+#define RS_TABLE_SIZE
+#endif
+
+#include <unit/serial.h>
--- /dev/null
+/* MN10300 Setup declarations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SETUP_H
+#define _ASM_SETUP_H
+
+extern void __init unit_setup(void);
+extern void __init unit_init_IRQ(void);
+
+#endif /* _ASM_SETUP_H */
--- /dev/null
+#ifndef _ASM_SHMBUF_H
+#define _ASM_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for MN10300 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+ struct ipc64_perm shm_perm; /* operation perms */
+ size_t shm_segsz; /* size of segment (bytes) */
+ __kernel_time_t shm_atime; /* last attach time */
+ unsigned long __unused1;
+ __kernel_time_t shm_dtime; /* last detach time */
+ unsigned long __unused2;
+ __kernel_time_t shm_ctime; /* last change time */
+ unsigned long __unused3;
+ __kernel_pid_t shm_cpid; /* pid of creator */
+ __kernel_pid_t shm_lpid; /* pid of last operator */
+ unsigned long shm_nattch; /* no. of current attaches */
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+struct shminfo64 {
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
+};
+
+#endif /* _ASM_SHMBUF_H */
--- /dev/null
+#ifndef _ASM_SHMPARAM_H
+#define _ASM_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
+
+#endif /* _ASM_SHMPARAM_H */
--- /dev/null
+/* MN10300 Userspace signal context
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGCONTEXT_H
+#define _ASM_SIGCONTEXT_H
+
+struct fpucontext {
+ /* Regular FPU environment */
+ unsigned long fs[32]; /* fpu registers */
+ unsigned long fpcr; /* fpu control register */
+};
+
+struct sigcontext {
+ unsigned long d0;
+ unsigned long d1;
+ unsigned long d2;
+ unsigned long d3;
+ unsigned long a0;
+ unsigned long a1;
+ unsigned long a2;
+ unsigned long a3;
+ unsigned long e0;
+ unsigned long e1;
+ unsigned long e2;
+ unsigned long e3;
+ unsigned long e4;
+ unsigned long e5;
+ unsigned long e6;
+ unsigned long e7;
+ unsigned long lar;
+ unsigned long lir;
+ unsigned long mdr;
+ unsigned long mcvf;
+ unsigned long mcrl;
+ unsigned long mcrh;
+ unsigned long mdrq;
+ unsigned long sp;
+ unsigned long epsw;
+ unsigned long pc;
+ struct fpucontext *fpucontext;
+ unsigned long oldmask;
+};
+
+
+#endif /* _ASM_SIGCONTEXT_H */
--- /dev/null
+#include <asm-generic/siginfo.h>
--- /dev/null
+/* MN10300 Signal definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SIGNAL_H
+#define _ASM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems. */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+ is taken to make libc match. */
+
+#define _NSIG 64
+#define _NSIG_BPW 32
+#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t; /* at least 32 bits */
+
+typedef struct {
+ unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+#define NSIG 32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP 1
+#define SIGINT 2
+#define SIGQUIT 3
+#define SIGILL 4
+#define SIGTRAP 5
+#define SIGABRT 6
+#define SIGIOT 6
+#define SIGBUS 7
+#define SIGFPE 8
+#define SIGKILL 9
+#define SIGUSR1 10
+#define SIGSEGV 11
+#define SIGUSR2 12
+#define SIGPIPE 13
+#define SIGALRM 14
+#define SIGTERM 15
+#define SIGSTKFLT 16
+#define SIGCHLD 17
+#define SIGCONT 18
+#define SIGSTOP 19
+#define SIGTSTP 20
+#define SIGTTIN 21
+#define SIGTTOU 22
+#define SIGURG 23
+#define SIGXCPU 24
+#define SIGXFSZ 25
+#define SIGVTALRM 26
+#define SIGPROF 27
+#define SIGWINCH 28
+#define SIGIO 29
+#define SIGPOLL SIGIO
+/*
+#define SIGLOST 29
+*/
+#define SIGPWR 30
+#define SIGSYS 31
+#define SIGUNUSED 31
+
+/* These should not be considered constants from userland. */
+#define SIGRTMIN 32
+#define SIGRTMAX (_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP 0x00000001U
+#define SA_NOCLDWAIT 0x00000002U
+#define SA_SIGINFO 0x00000004U
+#define SA_ONSTACK 0x08000000U
+#define SA_RESTART 0x10000000U
+#define SA_NODEFER 0x40000000U
+#define SA_RESETHAND 0x80000000U
+
+#define SA_NOMASK SA_NODEFER
+#define SA_ONESHOT SA_RESETHAND
+
+#define SA_RESTORER 0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK 1
+#define SS_DISABLE 2
+
+#define MINSIGSTKSZ 2048
+#define SIGSTKSZ 8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+ __sighandler_t sa_handler;
+ old_sigset_t sa_mask;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+ __sighandler_t sa_handler;
+ unsigned long sa_flags;
+ __sigrestore_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct k_sigaction {
+ struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers. */
+
+struct sigaction {
+ union {
+ __sighandler_t _sa_handler;
+ void (*_sa_sigaction)(int, struct siginfo *, void *);
+ } _u;
+ sigset_t sa_mask;
+ unsigned long sa_flags;
+ void (*sa_restorer)(void);
+};
+
+#define sa_handler _u._sa_handler
+#define sa_sigaction _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+ void __user *ss_sp;
+ int ss_flags;
+ size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+
+struct pt_regs;
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_SIGNAL_H */
--- /dev/null
+/* MN10300 SMP support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SMP_H
+#define _ASM_SMP_H
+
+#ifdef CONFIG_SMP
+#error SMP not yet supported for MN10300
+#endif
+
+#endif
--- /dev/null
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET 1
+
+#define SO_DEBUG 1
+#define SO_REUSEADDR 2
+#define SO_TYPE 3
+#define SO_ERROR 4
+#define SO_DONTROUTE 5
+#define SO_BROADCAST 6
+#define SO_SNDBUF 7
+#define SO_RCVBUF 8
+#define SO_SNDBUFFORCE 32
+#define SO_RCVBUFFORCE 33
+#define SO_KEEPALIVE 9
+#define SO_OOBINLINE 10
+#define SO_NO_CHECK 11
+#define SO_PRIORITY 12
+#define SO_LINGER 13
+#define SO_BSDCOMPAT 14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED 16
+#define SO_PEERCRED 17
+#define SO_RCVLOWAT 18
+#define SO_SNDLOWAT 19
+#define SO_RCVTIMEO 20
+#define SO_SNDTIMEO 21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION 22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
+#define SO_SECURITY_ENCRYPTION_NETWORK 24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER 26
+#define SO_DETACH_FILTER 27
+
+#define SO_PEERNAME 28
+#define SO_TIMESTAMP 29
+#define SCM_TIMESTAMP SO_TIMESTAMP
+
+#define SO_ACCEPTCONN 30
+
+#define SO_PEERSEC 31
+#define SO_PASSSEC 34
+#define SO_TIMESTAMPNS 35
+#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
+
+#define SO_MARK 36
+
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
+#endif /* _ASM_SOCKET_H */
--- /dev/null
+#ifndef _ASM_SOCKIOS_H
+#define _ASM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 0x8901
+#define SIOCSPGRP 0x8902
+#define FIOGETOWN 0x8903
+#define SIOCGPGRP 0x8904
+#define SIOCATMARK 0x8905
+#define SIOCGSTAMP 0x8906 /* Get stamp */
+#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
+
+#endif /* _ASM_SOCKIOS_H */
--- /dev/null
+/* MN10300 spinlock support
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SPINLOCK_H
+#define _ASM_SPINLOCK_H
+
+#error SMP spinlocks not implemented for MN10300
+
+#endif /* _ASM_SPINLOCK_H */
--- /dev/null
+#ifndef _ASM_STAT_H
+#define _ASM_STAT_H
+
+struct __old_kernel_stat {
+ unsigned short st_dev;
+ unsigned short st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned short st_rdev;
+ unsigned long st_size;
+ unsigned long st_atime;
+ unsigned long st_mtime;
+ unsigned long st_ctime;
+};
+
+struct stat {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned short st_mode;
+ unsigned short st_nlink;
+ unsigned short st_uid;
+ unsigned short st_gid;
+ unsigned long st_rdev;
+ unsigned long st_size;
+ unsigned long st_blksize;
+ unsigned long st_blocks;
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+ unsigned long st_mtime;
+ unsigned long st_mtime_nsec;
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+ unsigned long __unused4;
+ unsigned long __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+ unsigned long long st_dev;
+ unsigned char __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO 1
+ unsigned long __st_ino;
+
+ unsigned int st_mode;
+ unsigned int st_nlink;
+
+ unsigned long st_uid;
+ unsigned long st_gid;
+
+ unsigned long long st_rdev;
+ unsigned char __pad3[4];
+
+ long long st_size;
+ unsigned long st_blksize;
+
+ unsigned long st_blocks; /* Number 512-byte blocks allocated. */
+ unsigned long __pad4; /* future possible st_blocks high bits */
+
+ unsigned long st_atime;
+ unsigned long st_atime_nsec;
+
+ unsigned long st_mtime;
+ unsigned int st_mtime_nsec;
+
+ unsigned long st_ctime;
+ unsigned long st_ctime_nsec;
+
+ unsigned long long st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+
+#endif /* _ASM_STAT_H */
--- /dev/null
+#include <asm-generic/statfs.h>
--- /dev/null
+/* MN10300 Optimised string functions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Modified by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_STRING_H
+#define _ASM_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *dest, int ch, size_t count);
+extern void *memcpy(void *dest, const void *src, size_t count);
+extern void *memmove(void *dest, const void *src, size_t count);
+
+
+extern void __struct_cpy_bug(void);
+#define struct_cpy(x, y) \
+({ \
+ if (sizeof(*(x)) != sizeof(*(y))) \
+ __struct_cpy_bug; \
+ memcpy(x, y, sizeof(*(x))); \
+})
+
+#endif /* _ASM_STRING_H */
--- /dev/null
+/* MN10300 Byte-order primitive construction
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SWAB_H
+#define _ASM_SWAB_H
+
+#include <linux/types.h>
+
+#ifdef __GNUC__
+
+static inline __attribute__((const))
+__u32 __arch_swab32(__u32 x)
+{
+ __u32 ret;
+ asm("swap %1,%0" : "=r" (ret) : "r" (x));
+ return ret;
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __attribute__((const))
+__u16 __arch_swab16(__u16 x)
+{
+ __u16 ret;
+ asm("swaph %1,%0" : "=r" (ret) : "r" (x));
+ return ret;
+}
+#define __arch_swab32 __arch_swab32
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#endif /* _ASM_SWAB_H */
--- /dev/null
+/* MN10300 System definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_SYSTEM_H
+#define _ASM_SYSTEM_H
+
+#include <asm/cpu-regs.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+
+struct task_struct;
+struct thread_struct;
+
+extern asmlinkage
+struct task_struct *__switch_to(struct thread_struct *prev,
+ struct thread_struct *next,
+ struct task_struct *prev_task);
+
+/* context switching is now performed out-of-line in switch_to.S */
+#define switch_to(prev, next, last) \
+do { \
+ current->thread.wchan = (u_long) __builtin_return_address(0); \
+ (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
+ mb(); \
+ current->thread.wchan = 0; \
+} while (0)
+
+#define arch_align_stack(x) (x)
+
+#define nop() asm volatile ("nop")
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * For now, "wmb()" doesn't actually do anything, as all
+ * Intel CPU's follow what Intel calls a *Processor Order*,
+ * in which all writes are seen in the program order even
+ * outside the CPU.
+ *
+ * I expect future Intel CPU's to have a weaker ordering,
+ * but I'd also expect them to finally get their act together
+ * and add some real memory barriers if so.
+ *
+ * Some non intel clones support out of order store. wmb() ceases to be a
+ * nop for these.
+ */
+
+#define mb() asm volatile ("": : :"memory")
+#define rmb() mb()
+#define wmb() asm volatile ("": : :"memory")
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#endif
+
+#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define set_wmb(var, value) do { var = value; wmb(); } while (0)
+
+#define read_barrier_depends() do {} while (0)
+#define smp_read_barrier_depends() do {} while (0)
+
+/*****************************************************************************/
+/*
+ * interrupt control
+ * - "disabled": run in IM1/2
+ * - level 0 - GDB stub
+ * - level 1 - virtual serial DMA (if present)
+ * - level 5 - normal interrupt priority
+ * - level 6 - timer interrupt
+ * - "enabled": run in IM7
+ */
+#ifdef CONFIG_MN10300_TTYSM
+#define MN10300_CLI_LEVEL EPSW_IM_2
+#else
+#define MN10300_CLI_LEVEL EPSW_IM_1
+#endif
+
+#define local_save_flags(x) \
+do { \
+ typecheck(unsigned long, x); \
+ asm volatile( \
+ " mov epsw,%0 \n" \
+ : "=d"(x) \
+ ); \
+} while (0)
+
+#define local_irq_disable() \
+do { \
+ asm volatile( \
+ " and %0,epsw \n" \
+ " or %1,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ : \
+ : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \
+ ); \
+} while (0)
+
+#define local_irq_save(x) \
+do { \
+ local_save_flags(x); \
+ local_irq_disable(); \
+} while (0)
+
+/*
+ * we make sure local_irq_enable() doesn't cause priority inversion
+ */
+#ifndef __ASSEMBLY__
+
+extern unsigned long __mn10300_irq_enabled_epsw;
+
+#endif
+
+#define local_irq_enable() \
+do { \
+ unsigned long tmp; \
+ \
+ asm volatile( \
+ " mov epsw,%0 \n" \
+ " and %1,%0 \n" \
+ " or %2,%0 \n" \
+ " mov %0,epsw \n" \
+ : "=&d"(tmp) \
+ : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
+ ); \
+} while (0)
+
+#define local_irq_restore(x) \
+do { \
+ typecheck(unsigned long, x); \
+ asm volatile( \
+ " mov %0,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " nop \n" \
+ : \
+ : "d"(x) \
+ : "memory", "cc" \
+ ); \
+} while (0)
+
+#define irqs_disabled() \
+({ \
+ unsigned long flags; \
+ local_save_flags(flags); \
+ (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
+})
+
+/* hook to save power by halting the CPU
+ * - called from the idle loop
+ * - must reenable interrupts (which takes three instruction cycles to complete)
+ */
+#define safe_halt() \
+do { \
+ asm volatile(" or %0,epsw \n" \
+ " nop \n" \
+ " nop \n" \
+ " bset %2,(%1) \n" \
+ : \
+ : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
+ : "cc" \
+ ); \
+} while (0)
+
+#define STI or EPSW_IE|EPSW_IM,epsw
+#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
+
+/*****************************************************************************/
+/*
+ * MN10300 doesn't actually have an exchange instruction
+ */
+#ifndef __ASSEMBLY__
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((struct __xchg_dummy *)(x))
+
+static inline
+unsigned long __xchg(volatile unsigned long *m, unsigned long val)
+{
+ unsigned long retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ *m = val;
+ local_irq_restore(flags);
+ return retval;
+}
+
+#define xchg(ptr, v) \
+ ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
+ (unsigned long)(v)))
+
+static inline unsigned long __cmpxchg(volatile unsigned long *m,
+ unsigned long old, unsigned long new)
+{
+ unsigned long retval;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ retval = *m;
+ if (retval == old)
+ *m = new;
+ local_irq_restore(flags);
+ return retval;
+}
+
+#define cmpxchg(ptr, o, n) \
+ ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n)))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SYSTEM_H */
--- /dev/null
+#ifndef _ASM_TERMBITS_H
+#define _ASM_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char cc_t;
+typedef unsigned int speed_t;
+typedef unsigned int tcflag_t;
+
+#define NCCS 19
+struct termios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+};
+
+struct termios2 {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+struct ktermios {
+ tcflag_t c_iflag; /* input mode flags */
+ tcflag_t c_oflag; /* output mode flags */
+ tcflag_t c_cflag; /* control mode flags */
+ tcflag_t c_lflag; /* local mode flags */
+ cc_t c_line; /* line discipline */
+ cc_t c_cc[NCCS]; /* control characters */
+ speed_t c_ispeed; /* input speed */
+ speed_t c_ospeed; /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK 0000001
+#define BRKINT 0000002
+#define IGNPAR 0000004
+#define PARMRK 0000010
+#define INPCK 0000020
+#define ISTRIP 0000040
+#define INLCR 0000100
+#define IGNCR 0000200
+#define ICRNL 0000400
+#define IUCLC 0001000
+#define IXON 0002000
+#define IXANY 0004000
+#define IXOFF 0010000
+#define IMAXBEL 0020000
+#define IUTF8 0040000
+
+/* c_oflag bits */
+#define OPOST 0000001
+#define OLCUC 0000002
+#define ONLCR 0000004
+#define OCRNL 0000010
+#define ONOCR 0000020
+#define ONLRET 0000040
+#define OFILL 0000100
+#define OFDEL 0000200
+#define NLDLY 0000400
+#define NL0 0000000
+#define NL1 0000400
+#define CRDLY 0003000
+#define CR0 0000000
+#define CR1 0001000
+#define CR2 0002000
+#define CR3 0003000
+#define TABDLY 0014000
+#define TAB0 0000000
+#define TAB1 0004000
+#define TAB2 0010000
+#define TAB3 0014000
+#define XTABS 0014000
+#define BSDLY 0020000
+#define BS0 0000000
+#define BS1 0020000
+#define VTDLY 0040000
+#define VT0 0000000
+#define VT1 0040000
+#define FFDLY 0100000
+#define FF0 0000000
+#define FF1 0100000
+
+/* c_cflag bit meaning */
+#define CBAUD 0010017
+#define B0 0000000 /* hang up */
+#define B50 0000001
+#define B75 0000002
+#define B110 0000003
+#define B134 0000004
+#define B150 0000005
+#define B200 0000006
+#define B300 0000007
+#define B600 0000010
+#define B1200 0000011
+#define B1800 0000012
+#define B2400 0000013
+#define B4800 0000014
+#define B9600 0000015
+#define B19200 0000016
+#define B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE 0000060
+#define CS5 0000000
+#define CS6 0000020
+#define CS7 0000040
+#define CS8 0000060
+#define CSTOPB 0000100
+#define CREAD 0000200
+#define PARENB 0000400
+#define PARODD 0001000
+#define HUPCL 0002000
+#define CLOCAL 0004000
+#define CBAUDEX 0010000
+#define BOTHER 0010000
+#define B57600 0010001
+#define B115200 0010002
+#define B230400 0010003
+#define B460800 0010004
+#define B500000 0010005
+#define B576000 0010006
+#define B921600 0010007
+#define B1000000 0010010
+#define B1152000 0010011
+#define B1500000 0010012
+#define B2000000 0010013
+#define B2500000 0010014
+#define B3000000 0010015
+#define B3500000 0010016
+#define B4000000 0010017
+#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CTVB 004000000000 /* VisioBraille Terminal flow control */
+#define CMSPAR 010000000000 /* mark or space (stick) parity */
+#define CRTSCTS 020000000000 /* flow control */
+
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG 0000001
+#define ICANON 0000002
+#define XCASE 0000004
+#define ECHO 0000010
+#define ECHOE 0000020
+#define ECHOK 0000040
+#define ECHONL 0000100
+#define NOFLSH 0000200
+#define TOSTOP 0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE 0004000
+#define FLUSHO 0010000
+#define PENDIN 0040000
+#define IEXTEN 0100000
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF 0
+#define TCOON 1
+#define TCIOFF 2
+#define TCION 3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH 0
+#define TCOFLUSH 1
+#define TCIOFLUSH 2
+
+/* tcsetattr uses these */
+#define TCSANOW 0
+#define TCSADRAIN 1
+#define TCSAFLUSH 2
+
+#endif /* _ASM_TERMBITS_H */
--- /dev/null
+#ifndef _ASM_TERMIOS_H
+#define _ASM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+ unsigned short ws_row;
+ unsigned short ws_col;
+ unsigned short ws_xpixel;
+ unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+ unsigned short c_iflag; /* input mode flags */
+ unsigned short c_oflag; /* output mode flags */
+ unsigned short c_cflag; /* control mode flags */
+ unsigned short c_lflag; /* local mode flags */
+ unsigned char c_line; /* line discipline */
+ unsigned char c_cc[NCC]; /* control characters */
+};
+
+#ifdef __KERNEL__
+/* intr=^C quit=^| erase=del kill=^U
+ eof=^D vtime=\0 vmin=\1 sxtc=\0
+ start=^Q stop=^S susp=^Z eol=\0
+ reprint=^R discard=^U werase=^W lnext=^V
+ eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE 0x001
+#define TIOCM_DTR 0x002
+#define TIOCM_RTS 0x004
+#define TIOCM_ST 0x008
+#define TIOCM_SR 0x010
+#define TIOCM_CTS 0x020
+#define TIOCM_CAR 0x040
+#define TIOCM_RNG 0x080
+#define TIOCM_DSR 0x100
+#define TIOCM_CD TIOCM_CAR
+#define TIOCM_RI TIOCM_RNG
+#define TIOCM_OUT1 0x2000
+#define TIOCM_OUT2 0x4000
+#define TIOCM_LOOP 0x8000
+
+#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+ unsigned short __tmp; \
+ get_user(__tmp, &(termio)->x); \
+ *(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+ SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+ copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+ put_user((termios)->c_iflag, &(termio)->c_iflag); \
+ put_user((termios)->c_oflag, &(termio)->c_oflag); \
+ put_user((termios)->c_cflag, &(termio)->c_cflag); \
+ put_user((termios)->c_lflag, &(termio)->c_lflag); \
+ put_user((termios)->c_line, &(termio)->c_line); \
+ copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+ copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) \
+ copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) \
+ copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) \
+ copy_to_user(u, k, sizeof(struct termios))
+
+#endif /* _ASM_TERMIOS_H */
--- /dev/null
+/* MN10300 Low-level thread information
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#endif
+
+#define PREEMPT_ACTIVE 0x10000000
+
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE (4096)
+#else
+#define THREAD_SIZE (8192)
+#endif
+
+#define STACK_WARN (THREAD_SIZE / 8)
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+#ifndef __ASSEMBLY__
+
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ __u32 cpu; /* current CPU */
+ __s32 preempt_count; /* 0 => preemptable, <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space:
+ 0-0xBFFFFFFF for user-thead
+ 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+
+ __u8 supervisor_stack[0];
+};
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __ASM_OFFSETS_H__
+#include <asm/asm-offsets.h>
+#endif
+
+#endif
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = 1, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+#define init_uregs \
+ ((struct pt_regs *) \
+ ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
+
+extern struct thread_info *__current_ti;
+
+/* how to get the thread information struct from C */
+static inline __attribute__((const))
+struct thread_info *current_thread_info(void)
+{
+ struct thread_info *ti;
+ asm("mov sp,%0\n"
+ "and %1,%0\n"
+ : "=d" (ti)
+ : "i" (~(THREAD_SIZE - 1))
+ : "cc");
+ return ti;
+}
+
+/* how to get the current stack pointer from C */
+static inline unsigned long current_stack_pointer(void)
+{
+ unsigned long sp;
+ asm("mov sp,%0; ":"=r" (sp));
+ return sp;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+
+#define free_thread_info(ti) kfree((ti))
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#else /* !__ASSEMBLY__ */
+
+#ifndef __VMLINUX_LDS__
+/* how to get the thread information struct from ASM */
+.macro GET_THREAD_INFO reg
+ mov sp,\reg
+ and -THREAD_SIZE,\reg
+.endm
+#endif
+#endif
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ * access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */
+#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE 17 /* OOM killer killed process */
+#define TIF_FREEZE 18 /* freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP)
+#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE +(1 << TIF_FREEZE)
+
+#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
+#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
--- /dev/null
+/* AM33v2 on-board timer module registers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TIMER_REGS_H
+#define _ASM_TIMER_REGS_H
+
+#include <asm/cpu-regs.h>
+#include <asm/intctl-regs.h>
+
+#ifdef __KERNEL__
+
+/* timer prescalar control */
+#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */
+#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */
+#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */
+
+/* 8 bit timers */
+#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */
+#define TM0MD_SRC 0x07 /* timer source */
+#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
+#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */
+#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */
+#define TM1MD_SRC 0x07 /* timer source */
+#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */
+#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */
+#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */
+#define TM2MD_SRC 0x07 /* timer source */
+#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */
+#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */
+#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */
+#define TM3MD_SRC 0x07 /* timer source */
+#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */
+#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */
+#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */
+
+#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */
+#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */
+#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */
+#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */
+#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */
+
+#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */
+#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */
+#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */
+#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */
+#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
+
+#define TM0IRQ 2 /* timer 0 IRQ */
+#define TM1IRQ 3 /* timer 1 IRQ */
+#define TM2IRQ 4 /* timer 2 IRQ */
+#define TM3IRQ 5 /* timer 3 IRQ */
+
+#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */
+#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */
+#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */
+#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */
+
+/* 16-bit timers 4,5 & 7-11 */
+#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */
+#define TM4MD_SRC 0x07 /* timer source */
+#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */
+#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */
+#define TM5MD_SRC 0x07 /* timer source */
+#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */
+#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */
+#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */
+#define TM7MD_SRC 0x07 /* timer source */
+#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */
+#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */
+#define TM8MD_SRC 0x07 /* timer source */
+#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
+#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */
+#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */
+#define TM9MD_SRC 0x07 /* timer source */
+#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */
+#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */
+#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */
+#define TM10MD_SRC 0x07 /* timer source */
+#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */
+#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */
+#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */
+#define TM11MD_SRC 0x07 /* timer source */
+#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */
+#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
+#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
+#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
+#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
+#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
+#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
+#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */
+#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
+#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */
+
+#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */
+#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */
+#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */
+#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */
+#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */
+#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */
+#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */
+#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
+
+#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */
+#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */
+#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */
+
+#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */
+#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */
+#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */
+#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */
+#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */
+
+#define TM4IRQ 6 /* timer 4 IRQ */
+#define TM5IRQ 7 /* timer 5 IRQ */
+#define TM7IRQ 11 /* timer 7 IRQ */
+#define TM8IRQ 12 /* timer 8 IRQ */
+#define TM9IRQ 13 /* timer 9 IRQ */
+#define TM10IRQ 14 /* timer 10 IRQ */
+#define TM11IRQ 15 /* timer 11 IRQ */
+
+#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */
+#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */
+#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */
+#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */
+#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */
+#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */
+#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */
+
+/* 16-bit timer 6 */
+#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */
+#define TM6MD_SRC 0x0007 /* timer source */
+#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */
+#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */
+#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */
+#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */
+#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */
+#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */
+#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */
+#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
+#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */
+#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */
+#define TM6MD_PWM 0x3800 /* PWM output mode */
+#define TM6MD_PWM_DIS 0x0000 /* - disabled */
+#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */
+#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */
+#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */
+#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */
+#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */
+#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */
+
+#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */
+#define TM6MDA_OUT 0x07 /* output select */
+#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */
+#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */
+#define TM6MDA_OUT_SETA 0x02 /* - set at match A */
+#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */
+#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */
+#define TM6MDA_MODE 0xc0 /* compare A register mode */
+#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
+#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
+#define TM6MDA_EDGE 0x20 /* compare A edge select */
+#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */
+#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */
+#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */
+
+#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */
+#define TM6MDB_OUT 0x07 /* output select */
+#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */
+#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */
+#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */
+#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */
+#define TM6MDB_MODE 0xc0 /* compare B register mode */
+#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
+#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
+#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
+#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
+#define TM6MDB_EDGE 0x20 /* compare B edge select */
+#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */
+#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */
+#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */
+
+#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */
+#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */
+#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */
+
+#define TM6IRQ 6 /* timer 6 IRQ */
+#define TM6AIRQ 9 /* timer 6A IRQ */
+#define TM6BIRQ 10 /* timer 6B IRQ */
+
+#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */
+#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */
+#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMER_REGS_H */
--- /dev/null
+/* MN10300 Architecture time management specifications
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TIMEX_H
+#define _ASM_TIMEX_H
+
+#include <asm/hardirq.h>
+#include <unit/timex.h>
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
+ * to something appropriate, but what? */
+
+extern cycles_t cacheflush_time;
+
+#ifdef __KERNEL__
+
+static inline cycles_t get_cycles(void)
+{
+ return read_timestamp_counter();
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TIMEX_H */
--- /dev/null
+/* MN10300 TLB definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_TLB_H
+#define _ASM_TLB_H
+
+#include <asm/tlbflush.h>
+
+extern void check_pgt_cache(void);
+
+/*
+ * we don't need any special per-pte or per-vma handling...
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it fills up
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+/* for now, just use the generic stuff */
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TLB_H */
--- /dev/null
+/* MN10300 TLB flushing functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TLBFLUSH_H
+#define _ASM_TLBFLUSH_H
+
+#include <asm/processor.h>
+
+#define __flush_tlb() \
+do { \
+ int w; \
+ __asm__ __volatile__ \
+ (" mov %1,%0 \n" \
+ " or %2,%0 \n" \
+ " mov %0,%1 \n" \
+ : "=d"(w) \
+ : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
+ : "memory" \
+ ); \
+} while (0)
+
+#define __flush_tlb_all() __flush_tlb()
+#define __flush_tlb_one(addr) __flush_tlb()
+
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb() flushes the current mm struct TLBs
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(mm, start, end) flushes a range of pages
+ * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
+ */
+#define flush_tlb_all() \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+#define flush_tlb_mm(mm) \
+do { \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+#define flush_tlb_range(vma, start, end) \
+do { \
+ unsigned long __s __attribute__((unused)) = (start); \
+ unsigned long __e __attribute__((unused)) = (end); \
+ preempt_disable(); \
+ __flush_tlb_all(); \
+ preempt_enable(); \
+} while (0)
+
+
+#define __flush_tlb_global() flush_tlb_all()
+#define flush_tlb() flush_tlb_all()
+#define flush_tlb_kernel_range(start, end) \
+do { \
+ unsigned long __s __attribute__((unused)) = (start); \
+ unsigned long __e __attribute__((unused)) = (end); \
+ flush_tlb_all(); \
+} while (0)
+
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
+
+#define flush_tlb_pgtables(mm, start, end) do {} while (0)
+
+#endif /* _ASM_TLBFLUSH_H */
--- /dev/null
+#include <asm-generic/topology.h>
--- /dev/null
+/* MN10300 Basic type definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_TYPES_H
+#define _ASM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide. */
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_TYPES_H */
--- /dev/null
+/* MN10300 userspace access functions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/errno.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF)
+#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF)
+#define USER_DS MAKE_MM_SEG(TASK_SIZE)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
+
+/*
+ * check that a range of addresses falls within the current address limit
+ */
+static inline int ___range_ok(unsigned long addr, unsigned int size)
+{
+ int flag = 1, tmp;
+
+ asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */
+ " bcs 0f \n"
+ " cmp %4,%1 \n" /* jump if addr+size>limit (error) */
+ " bhi 0f \n"
+ " clr %0 \n" /* mark okay */
+ "0: \n"
+ : "=r"(flag), "=&r"(tmp)
+ : "1"(addr), "ir"(size),
+ "r"(current_thread_info()->addr_limit.seg), "0"(flag)
+ : "cc"
+ );
+
+ return flag;
+}
+
+#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
+
+#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
+#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0)
+
+static inline int verify_area(int type, const void *addr, unsigned long size)
+{
+ return access_ok(type, addr, size) ? 0 : -EFAULT;
+}
+
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+ unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise. */
+extern int fixup_exception(struct pt_regs *regs);
+
+#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "xxx_ret" versions return constant specified in third argument, if
+ * something bad happens. These macros can be optimized for the
+ * case of just returning from the function xxx_ret is used.
+ */
+
+#define put_user_ret(x, ptr, ret) \
+ ({ if (put_user((x), (ptr))) return (ret); })
+#define get_user_ret(x, ptr, ret) \
+ ({ if (get_user((x), (ptr))) return (ret); })
+#define __put_user_ret(x, ptr, ret) \
+ ({ if (__put_user((x), (ptr))) return (ret); })
+#define __get_user_ret(x, ptr, ret) \
+ ({ if (__get_user((x), (ptr))) return (ret); })
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct *)(x))
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ __typeof(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: __get_user_asm("bu"); break; \
+ case 2: __get_user_asm("hu"); break; \
+ case 4: __get_user_asm("" ); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_check(x, ptr, size) \
+({ \
+ __typeof__(*(ptr)) __gu_val; \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ if (likely(__access_ok(__gu_addr,size))) { \
+ switch (size) { \
+ case 1: __get_user_asm("bu"); break; \
+ case 2: __get_user_asm("hu"); break; \
+ case 4: __get_user_asm("" ); break; \
+ default: __get_user_unknown(); break; \
+ } \
+ } \
+ else { \
+ __gu_err = -EFAULT; \
+ __gu_val = 0; \
+ } \
+ x = (__typeof__(*(ptr))) __gu_val; \
+ __gu_err; \
+})
+
+#define __get_user_asm(INSN) \
+({ \
+ asm volatile( \
+ "1:\n" \
+ " mov"INSN" %2,%1\n" \
+ " mov 0,%0\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n\t" \
+ " mov %3,%0\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b, 3b\n" \
+ " .previous" \
+ : "=&r" (__gu_err), "=&r" (__gu_val) \
+ : "m" (__m(__gu_addr)), "i" (-EFAULT)); \
+})
+
+extern int __get_user_unknown(void);
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ union { \
+ __typeof__(*(ptr)) val; \
+ u32 bits[2]; \
+ } __pu_val; \
+ unsigned long __pu_addr; \
+ int __pu_err; \
+ __pu_val.val = (x); \
+ __pu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: __put_user_asm("bu"); break; \
+ case 2: __put_user_asm("hu"); break; \
+ case 4: __put_user_asm("" ); break; \
+ case 8: __put_user_asm8(); break; \
+ default: __pu_err = __put_user_unknown(); break; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_check(x, ptr, size) \
+({ \
+ union { \
+ __typeof__(*(ptr)) val; \
+ u32 bits[2]; \
+ } __pu_val; \
+ unsigned long __pu_addr; \
+ int __pu_err; \
+ __pu_val.val = (x); \
+ __pu_addr = (unsigned long) (ptr); \
+ if (likely(__access_ok(__pu_addr, size))) { \
+ switch (size) { \
+ case 1: __put_user_asm("bu"); break; \
+ case 2: __put_user_asm("hu"); break; \
+ case 4: __put_user_asm("" ); break; \
+ case 8: __put_user_asm8(); break; \
+ default: __pu_err = __put_user_unknown(); break; \
+ } \
+ } \
+ else { \
+ __pu_err = -EFAULT; \
+ } \
+ __pu_err; \
+})
+
+#define __put_user_asm(INSN) \
+({ \
+ asm volatile( \
+ "1:\n" \
+ " mov"INSN" %1,%2\n" \
+ " mov 0,%0\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n" \
+ " mov %3,%0\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 1b, 3b\n" \
+ " .previous" \
+ : "=&r" (__pu_err) \
+ : "r" (__pu_val.val), "m" (__m(__pu_addr)), \
+ "i" (-EFAULT) \
+ ); \
+})
+
+#define __put_user_asm8() \
+({ \
+ asm volatile( \
+ "1: mov %1,%3 \n" \
+ "2: mov %2,%4 \n" \
+ " mov 0,%0 \n" \
+ "3: \n" \
+ " .section .fixup,\"ax\" \n" \
+ "4: \n" \
+ " mov %5,%0 \n" \
+ " jmp 3b \n" \
+ " .previous \n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4 \n" \
+ " .long 1b, 4b \n" \
+ " .long 2b, 4b \n" \
+ " .previous \n" \
+ : "=&r" (__pu_err) \
+ : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \
+ "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \
+ "i" (-EFAULT) \
+ ); \
+})
+
+extern int __put_user_unknown(void);
+
+
+/*
+ * Copy To/From Userspace
+ */
+/* Generic arbitrary sized copy. */
+#define __copy_user(to, from, size) \
+do { \
+ if (size) { \
+ void *__to = to; \
+ const void *__from = from; \
+ int w; \
+ asm volatile( \
+ "0: movbu (%0),%3;\n" \
+ "1: movbu %3,(%1);\n" \
+ " inc %0;\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 0b;\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ " .previous\n" \
+ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+ : "0"(__from), "1"(__to), "2"(size) \
+ : "memory"); \
+ } \
+} while (0)
+
+#define __copy_user_zeroing(to, from, size) \
+do { \
+ if (size) { \
+ void *__to = to; \
+ const void *__from = from; \
+ int w; \
+ asm volatile( \
+ "0: movbu (%0),%3;\n" \
+ "1: movbu %3,(%1);\n" \
+ " inc %0;\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 0b;\n" \
+ "2:\n" \
+ " .section .fixup,\"ax\"\n" \
+ "3:\n" \
+ " mov %2,%0\n" \
+ " clr %3\n" \
+ "4: movbu %3,(%1);\n" \
+ " inc %1;\n" \
+ " add -1,%2;\n" \
+ " bne 4b;\n" \
+ " mov %0,%2\n" \
+ " jmp 2b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ " .previous\n" \
+ : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
+ : "0"(__from), "1"(__to), "2"(size) \
+ : "memory"); \
+ } \
+} while (0)
+
+/* We let the __ versions of copy_from/to_user inline, because they're often
+ * used in fast paths and have only a small space overhead.
+ */
+static inline
+unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __copy_user_zeroing(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __copy_user(to, from, n);
+ return n;
+}
+
+
+#if 0
+#error don't use - these macros don't increment to & from pointers
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user(to, from, size) \
+do { \
+ asm volatile( \
+ " mov %0,a0;\n" \
+ "0: movbu (%1),d3;\n" \
+ "1: movbu d3,(%2);\n" \
+ " add -1,a0;\n" \
+ " bne 0b;\n" \
+ "2:;" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : \
+ : "d"(size), "d"(to), "d"(from) \
+ : "d3", "a0"); \
+} while (0)
+
+/* Optimize just a little bit when we know the size of the move. */
+#define __constant_copy_user_zeroing(to, from, size) \
+do { \
+ asm volatile( \
+ " mov %0,a0;\n" \
+ "0: movbu (%1),d3;\n" \
+ "1: movbu d3,(%2);\n" \
+ " add -1,a0;\n" \
+ " bne 0b;\n" \
+ "2:;" \
+ ".section .fixup,\"ax\"\n" \
+ "3: jmp 2b\n" \
+ ".previous\n" \
+ ".section __ex_table,\"a\"\n" \
+ " .balign 4\n" \
+ " .long 0b,3b\n" \
+ " .long 1b,3b\n" \
+ ".previous" \
+ : \
+ : "d"(size), "d"(to), "d"(from) \
+ : "d3", "a0"); \
+} while (0)
+
+static inline
+unsigned long __constant_copy_to_user(void *to, const void *from,
+ unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ __constant_copy_user(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user(void *to, const void *from,
+ unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ __constant_copy_user_zeroing(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __constant_copy_user(to, from, n);
+ return n;
+}
+
+static inline
+unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
+ unsigned long n)
+{
+ __constant_copy_user_zeroing(to, from, n);
+ return n;
+}
+#endif
+
+extern unsigned long __generic_copy_to_user(void __user *, const void *,
+ unsigned long);
+extern unsigned long __generic_copy_from_user(void *, const void __user *,
+ unsigned long);
+
+#define __copy_to_user_inatomic(to, from, n) \
+ __generic_copy_to_user_nocheck((to), (from), (n))
+#define __copy_from_user_inatomic(to, from, n) \
+ __generic_copy_from_user_nocheck((to), (from), (n))
+
+#define __copy_to_user(to, from, n) \
+({ \
+ might_sleep(); \
+ __copy_to_user_inatomic((to), (from), (n)); \
+})
+
+#define __copy_from_user(to, from, n) \
+({ \
+ might_sleep(); \
+ __copy_from_user_inatomic((to), (from), (n)); \
+})
+
+
+#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n))
+#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+extern long strnlen_user(const char __user *str, long n);
+#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
+extern unsigned long clear_user(void __user *mem, unsigned long len);
+extern unsigned long __clear_user(void __user *mem, unsigned long len);
+
+#endif /* _ASM_UACCESS_H */
--- /dev/null
+/* MN10300 User context
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UCONTEXT_H
+#define _ASM_UCONTEXT_H
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif /* _ASM_UCONTEXT_H */
--- /dev/null
+/* MN10300 Unaligned memory access handling
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_MN10300_UNALIGNED_H
+#define _ASM_MN10300_UNALIGNED_H
+
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif /* _ASM_MN10300_UNALIGNED_H */
--- /dev/null
+/* MN10300 System call number list
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNISTD_H
+#define _ASM_UNISTD_H
+
+#define __NR_restart_syscall 0
+#define __NR_exit 1
+#define __NR_fork 2
+#define __NR_read 3
+#define __NR_write 4
+#define __NR_open 5
+#define __NR_close 6
+#define __NR_waitpid 7
+#define __NR_creat 8
+#define __NR_link 9
+#define __NR_unlink 10
+#define __NR_execve 11
+#define __NR_chdir 12
+#define __NR_time 13
+#define __NR_mknod 14
+#define __NR_chmod 15
+#define __NR_lchown 16
+#define __NR_break 17
+#define __NR_oldstat 18
+#define __NR_lseek 19
+#define __NR_getpid 20
+#define __NR_mount 21
+#define __NR_umount 22
+#define __NR_setuid 23
+#define __NR_getuid 24
+#define __NR_stime 25
+#define __NR_ptrace 26
+#define __NR_alarm 27
+#define __NR_oldfstat 28
+#define __NR_pause 29
+#define __NR_utime 30
+#define __NR_stty 31
+#define __NR_gtty 32
+#define __NR_access 33
+#define __NR_nice 34
+#define __NR_ftime 35
+#define __NR_sync 36
+#define __NR_kill 37
+#define __NR_rename 38
+#define __NR_mkdir 39
+#define __NR_rmdir 40
+#define __NR_dup 41
+#define __NR_pipe 42
+#define __NR_times 43
+#define __NR_prof 44
+#define __NR_brk 45
+#define __NR_setgid 46
+#define __NR_getgid 47
+#define __NR_signal 48
+#define __NR_geteuid 49
+#define __NR_getegid 50
+#define __NR_acct 51
+#define __NR_umount2 52
+#define __NR_lock 53
+#define __NR_ioctl 54
+#define __NR_fcntl 55
+#define __NR_mpx 56
+#define __NR_setpgid 57
+#define __NR_ulimit 58
+#define __NR_oldolduname 59
+#define __NR_umask 60
+#define __NR_chroot 61
+#define __NR_ustat 62
+#define __NR_dup2 63
+#define __NR_getppid 64
+#define __NR_getpgrp 65
+#define __NR_setsid 66
+#define __NR_sigaction 67
+#define __NR_sgetmask 68
+#define __NR_ssetmask 69
+#define __NR_setreuid 70
+#define __NR_setregid 71
+#define __NR_sigsuspend 72
+#define __NR_sigpending 73
+#define __NR_sethostname 74
+#define __NR_setrlimit 75
+#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage 77
+#define __NR_gettimeofday 78
+#define __NR_settimeofday 79
+#define __NR_getgroups 80
+#define __NR_setgroups 81
+#define __NR_select 82
+#define __NR_symlink 83
+#define __NR_oldlstat 84
+#define __NR_readlink 85
+#define __NR_uselib 86
+#define __NR_swapon 87
+#define __NR_reboot 88
+#define __NR_readdir 89
+#define __NR_mmap 90
+#define __NR_munmap 91
+#define __NR_truncate 92
+#define __NR_ftruncate 93
+#define __NR_fchmod 94
+#define __NR_fchown 95
+#define __NR_getpriority 96
+#define __NR_setpriority 97
+#define __NR_profil 98
+#define __NR_statfs 99
+#define __NR_fstatfs 100
+#define __NR_ioperm 101
+#define __NR_socketcall 102
+#define __NR_syslog 103
+#define __NR_setitimer 104
+#define __NR_getitimer 105
+#define __NR_stat 106
+#define __NR_lstat 107
+#define __NR_fstat 108
+#define __NR_olduname 109
+#define __NR_iopl 110
+#define __NR_vhangup 111
+#define __NR_idle 112
+#define __NR_vm86old 113
+#define __NR_wait4 114
+#define __NR_swapoff 115
+#define __NR_sysinfo 116
+#define __NR_ipc 117
+#define __NR_fsync 118
+#define __NR_sigreturn 119
+#define __NR_clone 120
+#define __NR_setdomainname 121
+#define __NR_uname 122
+#define __NR_modify_ldt 123
+#define __NR_adjtimex 124
+#define __NR_mprotect 125
+#define __NR_sigprocmask 126
+#define __NR_create_module 127
+#define __NR_init_module 128
+#define __NR_delete_module 129
+#define __NR_get_kernel_syms 130
+#define __NR_quotactl 131
+#define __NR_getpgid 132
+#define __NR_fchdir 133
+#define __NR_bdflush 134
+#define __NR_sysfs 135
+#define __NR_personality 136
+#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
+#define __NR_setfsuid 138
+#define __NR_setfsgid 139
+#define __NR__llseek 140
+#define __NR_getdents 141
+#define __NR__newselect 142
+#define __NR_flock 143
+#define __NR_msync 144
+#define __NR_readv 145
+#define __NR_writev 146
+#define __NR_getsid 147
+#define __NR_fdatasync 148
+#define __NR__sysctl 149
+#define __NR_mlock 150
+#define __NR_munlock 151
+#define __NR_mlockall 152
+#define __NR_munlockall 153
+#define __NR_sched_setparam 154
+#define __NR_sched_getparam 155
+#define __NR_sched_setscheduler 156
+#define __NR_sched_getscheduler 157
+#define __NR_sched_yield 158
+#define __NR_sched_get_priority_max 159
+#define __NR_sched_get_priority_min 160
+#define __NR_sched_rr_get_interval 161
+#define __NR_nanosleep 162
+#define __NR_mremap 163
+#define __NR_setresuid 164
+#define __NR_getresuid 165
+#define __NR_vm86 166
+#define __NR_query_module 167
+#define __NR_poll 168
+#define __NR_nfsservctl 169
+#define __NR_setresgid 170
+#define __NR_getresgid 171
+#define __NR_prctl 172
+#define __NR_rt_sigreturn 173
+#define __NR_rt_sigaction 174
+#define __NR_rt_sigprocmask 175
+#define __NR_rt_sigpending 176
+#define __NR_rt_sigtimedwait 177
+#define __NR_rt_sigqueueinfo 178
+#define __NR_rt_sigsuspend 179
+#define __NR_pread64 180
+#define __NR_pwrite64 181
+#define __NR_chown 182
+#define __NR_getcwd 183
+#define __NR_capget 184
+#define __NR_capset 185
+#define __NR_sigaltstack 186
+#define __NR_sendfile 187
+#define __NR_getpmsg 188 /* some people actually want streams */
+#define __NR_putpmsg 189 /* some people actually want streams */
+#define __NR_vfork 190
+#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
+#define __NR_mmap2 192
+#define __NR_truncate64 193
+#define __NR_ftruncate64 194
+#define __NR_stat64 195
+#define __NR_lstat64 196
+#define __NR_fstat64 197
+#define __NR_lchown32 198
+#define __NR_getuid32 199
+#define __NR_getgid32 200
+#define __NR_geteuid32 201
+#define __NR_getegid32 202
+#define __NR_setreuid32 203
+#define __NR_setregid32 204
+#define __NR_getgroups32 205
+#define __NR_setgroups32 206
+#define __NR_fchown32 207
+#define __NR_setresuid32 208
+#define __NR_getresuid32 209
+#define __NR_setresgid32 210
+#define __NR_getresgid32 211
+#define __NR_chown32 212
+#define __NR_setuid32 213
+#define __NR_setgid32 214
+#define __NR_setfsuid32 215
+#define __NR_setfsgid32 216
+#define __NR_pivot_root 217
+#define __NR_mincore 218
+#define __NR_madvise 219
+#define __NR_madvise1 219 /* delete when C lib stub is removed */
+#define __NR_getdents64 220
+#define __NR_fcntl64 221
+/* 223 is unused */
+#define __NR_gettid 224
+#define __NR_readahead 225
+#define __NR_setxattr 226
+#define __NR_lsetxattr 227
+#define __NR_fsetxattr 228
+#define __NR_getxattr 229
+#define __NR_lgetxattr 230
+#define __NR_fgetxattr 231
+#define __NR_listxattr 232
+#define __NR_llistxattr 233
+#define __NR_flistxattr 234
+#define __NR_removexattr 235
+#define __NR_lremovexattr 236
+#define __NR_fremovexattr 237
+#define __NR_tkill 238
+#define __NR_sendfile64 239
+#define __NR_futex 240
+#define __NR_sched_setaffinity 241
+#define __NR_sched_getaffinity 242
+#define __NR_set_thread_area 243
+#define __NR_get_thread_area 244
+#define __NR_io_setup 245
+#define __NR_io_destroy 246
+#define __NR_io_getevents 247
+#define __NR_io_submit 248
+#define __NR_io_cancel 249
+#define __NR_fadvise64 250
+
+#define __NR_exit_group 252
+#define __NR_lookup_dcookie 253
+#define __NR_epoll_create 254
+#define __NR_epoll_ctl 255
+#define __NR_epoll_wait 256
+#define __NR_remap_file_pages 257
+#define __NR_set_tid_address 258
+#define __NR_timer_create 259
+#define __NR_timer_settime (__NR_timer_create+1)
+#define __NR_timer_gettime (__NR_timer_create+2)
+#define __NR_timer_getoverrun (__NR_timer_create+3)
+#define __NR_timer_delete (__NR_timer_create+4)
+#define __NR_clock_settime (__NR_timer_create+5)
+#define __NR_clock_gettime (__NR_timer_create+6)
+#define __NR_clock_getres (__NR_timer_create+7)
+#define __NR_clock_nanosleep (__NR_timer_create+8)
+#define __NR_statfs64 268
+#define __NR_fstatfs64 269
+#define __NR_tgkill 270
+#define __NR_utimes 271
+#define __NR_fadvise64_64 272
+#define __NR_vserver 273
+#define __NR_mbind 274
+#define __NR_get_mempolicy 275
+#define __NR_set_mempolicy 276
+#define __NR_mq_open 277
+#define __NR_mq_unlink (__NR_mq_open+1)
+#define __NR_mq_timedsend (__NR_mq_open+2)
+#define __NR_mq_timedreceive (__NR_mq_open+3)
+#define __NR_mq_notify (__NR_mq_open+4)
+#define __NR_mq_getsetattr (__NR_mq_open+5)
+#define __NR_kexec_load 283
+#define __NR_waitid 284
+#define __NR_add_key 286
+#define __NR_request_key 287
+#define __NR_keyctl 288
+#define __NR_cacheflush 289
+#define __NR_ioprio_set 290
+#define __NR_ioprio_get 291
+#define __NR_inotify_init 292
+#define __NR_inotify_add_watch 293
+#define __NR_inotify_rm_watch 294
+#define __NR_migrate_pages 295
+#define __NR_openat 296
+#define __NR_mkdirat 297
+#define __NR_mknodat 298
+#define __NR_fchownat 299
+#define __NR_futimesat 300
+#define __NR_fstatat64 301
+#define __NR_unlinkat 302
+#define __NR_renameat 303
+#define __NR_linkat 304
+#define __NR_symlinkat 305
+#define __NR_readlinkat 306
+#define __NR_fchmodat 307
+#define __NR_faccessat 308
+#define __NR_pselect6 309
+#define __NR_ppoll 310
+#define __NR_unshare 311
+#define __NR_set_robust_list 312
+#define __NR_get_robust_list 313
+#define __NR_splice 314
+#define __NR_sync_file_range 315
+#define __NR_tee 316
+#define __NR_vmsplice 317
+#define __NR_move_pages 318
+#define __NR_getcpu 319
+#define __NR_epoll_pwait 320
+#define __NR_utimensat 321
+#define __NR_signalfd 322
+#define __NR_timerfd_create 323
+#define __NR_eventfd 324
+#define __NR_fallocate 325
+#define __NR_timerfd_settime 326
+#define __NR_timerfd_gettime 327
+#define __NR_signalfd4 328
+#define __NR_eventfd2 329
+#define __NR_epoll_create1 330
+#define __NR_dup3 331
+#define __NR_pipe2 332
+#define __NR_inotify_init1 333
+#define __NR_preadv 334
+#define __NR_pwritev 335
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 326
+
+/*
+ * specify the deprecated syscalls we want to support on this arch
+ */
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_UNISTD_H */
--- /dev/null
+/* MN10300 User process data
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_USER_H
+#define _ASM_USER_H
+
+#include <asm/page.h>
+#include <linux/ptrace.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * When the kernel dumps core, it starts by dumping the user struct - this will
+ * be used by gdb to figure out where the data and stack segments are within
+ * the file, and what virtual addresses to use.
+ */
+struct user {
+ /* We start with the registers, to mimic the way that "memory" is
+ * returned from the ptrace(3,...) function.
+ */
+ struct pt_regs regs; /* Where the registers are actually stored */
+
+ /* The rest of this junk is to help gdb figure out what goes where */
+ unsigned long int u_tsize; /* Text segment size (pages). */
+ unsigned long int u_dsize; /* Data segment size (pages). */
+ unsigned long int u_ssize; /* Stack segment size (pages). */
+ unsigned long start_code; /* Starting virtual address of text. */
+ unsigned long start_stack; /* Starting virtual address of stack area.
+ This is actually the bottom of the stack,
+ the top of the stack is always found in the
+ esp register. */
+ long int signal; /* Signal that caused the core dump. */
+ int reserved; /* No longer used */
+ struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */
+
+ /* the registers */
+ unsigned long magic; /* To uniquely identify a core file */
+ char u_comm[32]; /* User command that was responsible */
+};
+#endif
+
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR +(u.start_code)
+#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_USER_H */
--- /dev/null
+/* MN10300 VGA register definitions
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_VGA_H
+#define _ASM_VGA_H
+
+
+
+#endif /* _ASM_VGA_H */
--- /dev/null
+#include <asm-generic/xor.h>
#include <asm/intctl-regs.h>
#include <asm/busctl-regs.h>
#include <asm/timer-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/errno.h>
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 335 */
nr_syscalls=(.-sys_call_table)/4
#include <asm/thread_info.h>
#include <asm/frame.inc>
#include <asm/intctl-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
.text
#include <asm/gdb-stub.h>
#include <asm/exceptions.h>
#include <asm/serial-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
/*
* initialise the GDB stub
#include <asm/cpu-regs.h>
#include <asm/frame.inc>
#include <asm/intctl-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
#include "mn10300-serial.h"
.text
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/exceptions.h>
-#include <asm/unit/clock.h>
+#include <unit/clock.h>
#include "mn10300-serial.h"
#if defined(CONFIG_GDBSTUB_ON_TTYSM0)
#include <asm/cacheflush.h>
#include <asm/serial-regs.h>
#include <asm/busctl-regs.h>
-#include <asm/unit/leds.h>
-#include <asm/unit/serial.h>
+#include <unit/leds.h>
+#include <unit/serial.h>
/* define to use F7F7 rather than FF which is subverted by JTAG debugger */
#undef GDBSTUB_USE_F7F7_AS_BREAKPOINT
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <linux/serial_reg.h>
#include <asm/pgtable.h>
#include <asm/frame.inc>
#include <asm/param.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
- .section .text.head,"ax"
+ __HEAD
###############################################################################
#
int irq;
for (irq = 0; irq < NR_IRQS; irq++)
- if (irq_desc[irq].chip == &no_irq_type)
+ if (irq_desc[irq].chip == &no_irq_chip)
/* due to the PIC latching interrupt requests, even
* when the IRQ is disabled, IRQ_PENDING is superfluous
* and we can use handle_level_irq() for edge-triggered
#include <asm/cpu-regs.h>
#include <asm/frame.inc>
#include <asm/timer-regs.h>
-#include <asm/proc/cache.h>
-#include <asm/unit/timex.h>
+#include <proc/cache.h>
+#include <unit/timex.h>
#include "mn10300-serial.h"
#define SCxCTR 0x00
#include <asm/irq.h>
#include <asm/bitops.h>
#include <asm/serial-regs.h>
-#include <asm/unit/timex.h>
+#include <unit/timex.h>
#include "mn10300-serial.h"
static inline __attribute__((format(printf, 1, 2)))
#include <asm/div64.h>
#include <asm/smp.h>
#include <asm/gdb-stub.h>
-#include <asm/proc/clock.h>
+#include <proc/clock.h>
static DEFINE_SPINLOCK(watchdog_print_lock);
static unsigned int watchdog;
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/smp.h>
-#include <asm/proc/proc.h>
+#include <proc/proc.h>
#include <asm/busctl-regs.h>
#include <asm/fpu.h>
#include <asm/sections.h>
data_resource.start = virt_to_bus(&_etext);
data_resource.end = virt_to_bus(&_edata)-1;
-#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
-
start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
kstart_pfn = PFN_UP(__pa(&_text));
free_pfn = PFN_UP(__pa(&_end));
#include <asm/cacheflush.h>
#include <asm/cpu-regs.h>
#include <asm/busctl-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
#include <asm/fpu.h>
#include <asm/gdb-stub.h>
#include <asm/sections.h>
_stext = .;
_text = .; /* Text and read-only data */
.text : {
- *(
- .text.head
- .text
- )
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
+++ /dev/null
-
-menu "Profiling support"
- depends on EXPERIMENTAL
-
-config PROFILING
- bool "Profiling support (EXPERIMENTAL)"
- help
- Say Y here to enable the extended profiling support mechanisms used
- by profilers such as OProfile.
-
-
-config OPROFILE
- tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING
- help
- OProfile is a profiling system capable of profiling the
- whole system, include the kernel, kernel modules, libraries,
- and applications.
-
- If unsure, say N.
-
-endmenu
-
--- /dev/null
+/* MN103E010 Cache specification
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CACHE_H
+#define _ASM_PROC_CACHE_H
+
+/* L1 cache */
+
+#define L1_CACHE_NWAYS 4 /* number of ways in caches */
+#define L1_CACHE_NENTRIES 256 /* number of entries in each way */
+#define L1_CACHE_BYTES 16 /* bytes per entry */
+#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */
+#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */
+
+#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */
+#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
+#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
+#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
+
+/*
+ * specification of the interval between interrupt checking intervals whilst
+ * managing the cache with the interrupts disabled
+ */
+#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4
+
+#endif /* _ASM_PROC_CACHE_H */
--- /dev/null
+/* MN103E010-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_PROC_CLOCK_H
+#define _ASM_PROC_CLOCK_H
+
+#include <unit/clock.h>
+
+#define MN10300_WDCLK MN10300_IOCLK
+
+#endif /* _ASM_PROC_CLOCK_H */
--- /dev/null
+/* MN103E010 On-board interrupt controller numbers
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_IRQ_H
+#define _ASM_PROC_IRQ_H
+
+#ifdef __KERNEL__
+
+#define GxICR_NUM_IRQS 42
+
+#define GxICR_NUM_XIRQS 8
+
+#define XIRQ0 34
+#define XIRQ1 35
+#define XIRQ2 36
+#define XIRQ3 37
+#define XIRQ4 38
+#define XIRQ5 39
+#define XIRQ6 40
+#define XIRQ7 41
+
+#define XIRQ2IRQ(num) (XIRQ0 + num)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_PROC_IRQ_H */
--- /dev/null
+/* MN103E010 Processor description
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_PROC_PROC_H
+#define _ASM_PROC_PROC_H
+
+#define PROCESSOR_VENDOR_NAME "Matsushita"
+#define PROCESSOR_MODEL_NAME "mn103e010"
+
+#endif /* _ASM_PROC_PROC_H */
--- /dev/null
+/* ASB2303-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
--- /dev/null
+/* ASB2303-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32)
+#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+
+/* flip the 7-segment LEDs between "G" and "-" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \
+} while (0)
+
+/* indicate double-fault by displaying "d" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43,d0 ; \
+ movbu d0,(ASB2303_7SEGLEDS)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code code);
+extern void peripheral_leds_led_chase(void);
+extern void debug_to_serial(const char *p, int n);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
--- /dev/null
+/* ASB2303-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ }, \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ GDBPORT_SERIAL_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ GDBPORT_SERIAL_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
--- /dev/null
+/* Support for the SMC91C111 NIC on an ASB2303
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SMC91111_H
+#define _ASM_UNIT_SMC91111_H
+
+#include <asm/intctl-regs.h>
+
+#define SMC91111_BASE 0xAA000300UL
+#define SMC91111_BASE_END 0xAA000400UL
+#define SMC91111_IRQ XIRQ3
+
+#define SMC_CAN_USE_8BIT 0
+#define SMC_CAN_USE_16BIT 1
+#define SMC_CAN_USE_32BIT 0
+#define SMC_NOWAIT 1
+#define SMC_IRQ_FLAGS (0)
+
+#if SMC_CAN_USE_8BIT
+#define SMC_inb(a, r) inb((unsigned long) ((a) + (r)))
+#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r)))
+#endif
+
+#if SMC_CAN_USE_16BIT
+#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
+#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
+#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#if SMC_CAN_USE_32BIT
+#define SMC_inl(a, r) inl((unsigned long) ((a) + (r)))
+#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r)))
+#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l))
+#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l))
+#endif
+
+#define RPC_LSA_DEFAULT RPC_LED_100_10
+#define RPC_LSB_DEFAULT RPC_LED_TX_RX
+
+#define set_irq_type(irq, type)
+
+#endif /* _ASM_UNIT_SMC91111_H */
--- /dev/null
+/* ASB2303-specific timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/timer-regs.h>
+#include <unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t)TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#include <asm/rtc-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
#if 0
static const u8 asb2303_led_hex_tbl[16] = {
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
-#include <asm/unit/smc91111.h>
+#include <unit/smc91111.h>
static struct resource smc91c111_resources[] = {
[0] = {
--- /dev/null
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
--- /dev/null
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset() \
+do { \
+ P0OUT &= 0xbf; \
+ P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43077f1d,d0 ; \
+ mov d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
--- /dev/null
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ TTYS0_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ TTYS0_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ TTYS0_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ TTYS0_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
--- /dev/null
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
#include <asm/processor.h>
#include <asm/cpu/intctl-regs.h>
#include <asm/cpu/rtc-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
static const u8 asb2305_led_hex_tbl[16] = {
0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
#include <asm/cpu/intctl-regs.h>
#include <asm/cpu/rtc-regs.h>
#include <asm/cpu/serial-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
/*
* initialise some of the unit hardware before gdbstub is set up
return cpu_dest;
}
-static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
+static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
{
int cpu_dest;
cpu_dest = cpu_check_affinity(irq, dest);
if (cpu_dest < 0)
- return;
+ return -1;
cpumask_copy(&irq_desc[irq].affinity, dest);
+
+ return 0;
}
#endif
default y if PMAC_APM_EMU
bool
+config DTC
+ bool
+ default y
+
config DEFAULT_UIMAGE
bool
help
config PPC_256K_PAGES
bool "256k page size" if 44x
- depends on !STDBINUTILS && (!SHMEM || BROKEN)
+ depends on !STDBINUTILS
help
Make the page size 256k.
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ default "0x00200000" if NOT_COHERENT_CACHE
+
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
-void ibm4xx_denali_fixup_memsize(void)
+/*
+ * Some U-Boot versions set the number of chipselects to two
+ * for Sequoia/Rainier boards while they only have one chipselect
+ * hardwired. Hardcode the number of chipselects to one
+ * for sequioa/rainer board models or read the actual value
+ * from the memory controller register DDR0_10 otherwise.
+ */
+static inline u32 ibm4xx_denali_get_cs(void)
{
- u32 val, max_cs, max_col, max_row;
- u32 cs, col, row, bank, dpath;
- unsigned long memsize;
+ void *devp;
+ char model[64];
+ u32 val, cs;
- val = SDRAM0_READ(DDR0_02);
- if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
- fatal("DDR controller is not initialized\n");
+ devp = finddevice("/");
+ if (!devp)
+ goto read_cs;
- /* get maximum cs col and row values */
- max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
- max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
- max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+ if (getprop(devp, "model", model, sizeof(model)) <= 0)
+ goto read_cs;
+ model[sizeof(model)-1] = 0;
+
+ if (!strcmp(model, "amcc,sequoia") ||
+ !strcmp(model, "amcc,rainier"))
+ return 1;
+
+read_cs:
/* get CS value */
val = SDRAM0_READ(DDR0_10);
cs++;
val = val >> 1;
}
+ return cs;
+}
+
+void ibm4xx_denali_fixup_memsize(void)
+{
+ u32 val, max_cs, max_col, max_row;
+ u32 cs, col, row, bank, dpath;
+ unsigned long memsize;
+
+ val = SDRAM0_READ(DDR0_02);
+ if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
+ fatal("DDR controller is not initialized\n");
+ /* get maximum cs col and row values */
+ max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
+ max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
+ max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+
+ cs = ibm4xx_denali_get_cs();
if (!cs)
fatal("No memory installed\n");
if (cs > max_cs)
val = SDRAM0_READ(DDR0_14);
if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
- dpath = 8; /* 64 bits */
- else
dpath = 4; /* 32 bits */
+ else
+ dpath = 8; /* 64 bits */
/* get address pins (rows) */
val = SDRAM0_READ(DDR0_42);
BOOTCFLAGS += -fno-stack-protector
endif
-BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
+BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
DTS_FLAGS ?= -p 1024
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
-src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ $(addprefix $(obj)/,$(libfdtheader))
+
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
- $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
+ $(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
+quiet_cmd_copy_libfdt = COPY $@
+ cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,copy_libfdt)
+
$(obj)/empty.c:
@touch $@
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+ $(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+ $(call if_changed_dep,bootcc)
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,bootcc)
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote addRamDisk hack-coff mktree dtc
+hostprogs-y := addnote addRamDisk hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
dtstree := $(srctree)/$(src)/dts
wrapper :=$(srctree)/$(src)/wrapper
-wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
+wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper) FORCE
-#############
-# Bits for building dtc
-# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
-
-dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
-dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
-dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
-
-# prerequisites on generated files needs to be explicit
-$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
-$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
-
-HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
-
-targets += dtc-src/dtc-parser.tab.c
-targets += dtc-src/dtc-lexer.lex.c
-
-clean-files += dtc-src/dtc-parser.tab.h
-
-ifdef DTC_GENPARSER
-BISON = bison
-FLEX = flex
-
-quiet_cmd_bison = BISON $@
- cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
-quiet_cmd_flex = FLEX $@
- cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
-
-$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
- $(call if_changed,bison)
-
-$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
-
-$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
- $(call if_changed,flex)
-endif
-
#############
# Bits for building various flavours of zImage
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
# Rule to build device tree blobs
-$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
- $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+DTC = $(objtree)/scripts/dtc/dtc
+
+$(obj)/%.dtb: $(dtstree)/%.dts
+ $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
- otheros.bld *.dtb
+ simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
+++ /dev/null
-# Makefile.dtc
-#
-# This is not a complete Makefile of itself. Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
- checks.c
-DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
-DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-#ifdef TRACE_CHECKS
-#define TRACE(c, ...) \
- do { \
- fprintf(stderr, "=== %s: ", (c)->name); \
- fprintf(stderr, __VA_ARGS__); \
- fprintf(stderr, "\n"); \
- } while (0)
-#else
-#define TRACE(c, fmt, ...) do { } while (0)
-#endif
-
-enum checklevel {
- IGNORE = 0,
- WARN = 1,
- ERROR = 2,
-};
-
-enum checkstatus {
- UNCHECKED = 0,
- PREREQ,
- PASSED,
- FAILED,
-};
-
-struct check;
-
-typedef void (*tree_check_fn)(struct check *c, struct node *dt);
-typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node);
-typedef void (*prop_check_fn)(struct check *c, struct node *dt,
- struct node *node, struct property *prop);
-
-struct check {
- const char *name;
- tree_check_fn tree_fn;
- node_check_fn node_fn;
- prop_check_fn prop_fn;
- void *data;
- enum checklevel level;
- enum checkstatus status;
- int inprogress;
- int num_prereqs;
- struct check **prereq;
-};
-
-#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \
- static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \
- static struct check nm = { \
- .name = #nm, \
- .tree_fn = (tfn), \
- .node_fn = (nfn), \
- .prop_fn = (pfn), \
- .data = (d), \
- .level = (lvl), \
- .status = UNCHECKED, \
- .num_prereqs = ARRAY_SIZE(nm##_prereqs), \
- .prereq = nm##_prereqs, \
- };
-
-#define TREE_CHECK(nm, d, lvl, ...) \
- CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__)
-#define NODE_CHECK(nm, d, lvl, ...) \
- CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__)
-#define PROP_CHECK(nm, d, lvl, ...) \
- CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__)
-#define BATCH_CHECK(nm, lvl, ...) \
- CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__)
-
-#ifdef __GNUC__
-static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
-#endif
-static inline void check_msg(struct check *c, const char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
-
- if ((c->level < WARN) || (c->level <= quiet))
- return; /* Suppress message */
-
- fprintf(stderr, "%s (%s): ",
- (c->level == ERROR) ? "ERROR" : "Warning", c->name);
- vfprintf(stderr, fmt, ap);
- fprintf(stderr, "\n");
-}
-
-#define FAIL(c, ...) \
- do { \
- TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
- (c)->status = FAILED; \
- check_msg((c), __VA_ARGS__); \
- } while (0)
-
-static void check_nodes_props(struct check *c, struct node *dt, struct node *node)
-{
- struct node *child;
- struct property *prop;
-
- TRACE(c, "%s", node->fullpath);
- if (c->node_fn)
- c->node_fn(c, dt, node);
-
- if (c->prop_fn)
- for_each_property(node, prop) {
- TRACE(c, "%s\t'%s'", node->fullpath, prop->name);
- c->prop_fn(c, dt, node, prop);
- }
-
- for_each_child(node, child)
- check_nodes_props(c, dt, child);
-}
-
-static int run_check(struct check *c, struct node *dt)
-{
- int error = 0;
- int i;
-
- assert(!c->inprogress);
-
- if (c->status != UNCHECKED)
- goto out;
-
- c->inprogress = 1;
-
- for (i = 0; i < c->num_prereqs; i++) {
- struct check *prq = c->prereq[i];
- error |= run_check(prq, dt);
- if (prq->status != PASSED) {
- c->status = PREREQ;
- check_msg(c, "Failed prerequisite '%s'",
- c->prereq[i]->name);
- }
- }
-
- if (c->status != UNCHECKED)
- goto out;
-
- if (c->node_fn || c->prop_fn)
- check_nodes_props(c, dt, dt);
-
- if (c->tree_fn)
- c->tree_fn(c, dt);
- if (c->status == UNCHECKED)
- c->status = PASSED;
-
- TRACE(c, "\tCompleted, status %d", c->status);
-
-out:
- c->inprogress = 0;
- if ((c->status != PASSED) && (c->level == ERROR))
- error = 1;
- return error;
-}
-
-/*
- * Utility check functions
- */
-
-static void check_is_string(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- char *propname = c->data;
-
- prop = get_property(node, propname);
- if (!prop)
- return; /* Not present, assumed ok */
-
- if (!data_is_one_string(prop->val))
- FAIL(c, "\"%s\" property in %s is not a string",
- propname, node->fullpath);
-}
-#define CHECK_IS_STRING(nm, propname, lvl) \
- CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl))
-
-static void check_is_cell(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- char *propname = c->data;
-
- prop = get_property(node, propname);
- if (!prop)
- return; /* Not present, assumed ok */
-
- if (prop->val.len != sizeof(cell_t))
- FAIL(c, "\"%s\" property in %s is not a single cell",
- propname, node->fullpath);
-}
-#define CHECK_IS_CELL(nm, propname, lvl) \
- CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl))
-
-/*
- * Structural check functions
- */
-
-static void check_duplicate_node_names(struct check *c, struct node *dt,
- struct node *node)
-{
- struct node *child, *child2;
-
- for_each_child(node, child)
- for (child2 = child->next_sibling;
- child2;
- child2 = child2->next_sibling)
- if (streq(child->name, child2->name))
- FAIL(c, "Duplicate node name %s",
- child->fullpath);
-}
-NODE_CHECK(duplicate_node_names, NULL, ERROR);
-
-static void check_duplicate_property_names(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop, *prop2;
-
- for_each_property(node, prop)
- for (prop2 = prop->next; prop2; prop2 = prop2->next)
- if (streq(prop->name, prop2->name))
- FAIL(c, "Duplicate property name %s in %s",
- prop->name, node->fullpath);
-}
-NODE_CHECK(duplicate_property_names, NULL, ERROR);
-
-#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
-#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
-#define DIGITS "0123456789"
-#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
-
-static void check_node_name_chars(struct check *c, struct node *dt,
- struct node *node)
-{
- int n = strspn(node->name, c->data);
-
- if (n < strlen(node->name))
- FAIL(c, "Bad character '%c' in node %s",
- node->name[n], node->fullpath);
-}
-NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
-
-static void check_node_name_format(struct check *c, struct node *dt,
- struct node *node)
-{
- if (strchr(get_unitname(node), '@'))
- FAIL(c, "Node %s has multiple '@' characters in name",
- node->fullpath);
-}
-NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
-
-static void check_property_name_chars(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- int n = strspn(prop->name, c->data);
-
- if (n < strlen(prop->name))
- FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
- prop->name[n], prop->name, node->fullpath);
-}
-PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
-
-static void check_explicit_phandles(struct check *c, struct node *root,
- struct node *node)
-{
- struct property *prop;
- struct node *other;
- cell_t phandle;
-
- prop = get_property(node, "linux,phandle");
- if (! prop)
- return; /* No phandle, that's fine */
-
- if (prop->val.len != sizeof(cell_t)) {
- FAIL(c, "%s has bad length (%d) linux,phandle property",
- node->fullpath, prop->val.len);
- return;
- }
-
- phandle = propval_cell(prop);
- if ((phandle == 0) || (phandle == -1)) {
- FAIL(c, "%s has invalid linux,phandle value 0x%x",
- node->fullpath, phandle);
- return;
- }
-
- other = get_node_by_phandle(root, phandle);
- if (other) {
- FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
- node->fullpath, phandle, other->fullpath);
- return;
- }
-
- node->phandle = phandle;
-}
-NODE_CHECK(explicit_phandles, NULL, ERROR);
-
-static void check_name_properties(struct check *c, struct node *root,
- struct node *node)
-{
- struct property **pp, *prop = NULL;
-
- for (pp = &node->proplist; *pp; pp = &((*pp)->next))
- if (streq((*pp)->name, "name")) {
- prop = *pp;
- break;
- }
-
- if (!prop)
- return; /* No name property, that's fine */
-
- if ((prop->val.len != node->basenamelen+1)
- || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
- FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
- " of base node name)", node->fullpath, prop->val.val);
- } else {
- /* The name property is correct, and therefore redundant.
- * Delete it */
- *pp = prop->next;
- free(prop->name);
- data_free(prop->val);
- free(prop);
- }
-}
-CHECK_IS_STRING(name_is_string, "name", ERROR);
-NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
-
-/*
- * Reference fixup functions
- */
-
-static void fixup_phandle_references(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- cell_t phandle;
-
- for_each_marker_of_type(m, REF_PHANDLE) {
- assert(m->offset + sizeof(cell_t) <= prop->val.len);
-
- refnode = get_node_by_ref(dt, m->ref);
- if (! refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
-
- phandle = get_node_phandle(dt, refnode);
- *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
- }
-}
-CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
- &duplicate_node_names, &explicit_phandles);
-
-static void fixup_path_references(struct check *c, struct node *dt,
- struct node *node, struct property *prop)
-{
- struct marker *m = prop->val.markers;
- struct node *refnode;
- char *path;
-
- for_each_marker_of_type(m, REF_PATH) {
- assert(m->offset <= prop->val.len);
-
- refnode = get_node_by_ref(dt, m->ref);
- if (!refnode) {
- FAIL(c, "Reference to non-existent node or label \"%s\"\n",
- m->ref);
- continue;
- }
-
- path = refnode->fullpath;
- prop->val = data_insert_at_marker(prop->val, m, path,
- strlen(path) + 1);
- }
-}
-CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR,
- &duplicate_node_names);
-
-/*
- * Semantic checks
- */
-CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN);
-CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN);
-CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN);
-
-CHECK_IS_STRING(device_type_is_string, "device_type", WARN);
-CHECK_IS_STRING(model_is_string, "model", WARN);
-CHECK_IS_STRING(status_is_string, "status", WARN);
-
-static void fixup_addr_size_cells(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
-
- node->addr_cells = -1;
- node->size_cells = -1;
-
- prop = get_property(node, "#address-cells");
- if (prop)
- node->addr_cells = propval_cell(prop);
-
- prop = get_property(node, "#size-cells");
- if (prop)
- node->size_cells = propval_cell(prop);
-}
-CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN,
- &address_cells_is_cell, &size_cells_is_cell);
-
-#define node_addr_cells(n) \
- (((n)->addr_cells == -1) ? 2 : (n)->addr_cells)
-#define node_size_cells(n) \
- (((n)->size_cells == -1) ? 1 : (n)->size_cells)
-
-static void check_reg_format(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
- int addr_cells, size_cells, entrylen;
-
- prop = get_property(node, "reg");
- if (!prop)
- return; /* No "reg", that's fine */
-
- if (!node->parent) {
- FAIL(c, "Root node has a \"reg\" property");
- return;
- }
-
- if (prop->val.len == 0)
- FAIL(c, "\"reg\" property in %s is empty", node->fullpath);
-
- addr_cells = node_addr_cells(node->parent);
- size_cells = node_size_cells(node->parent);
- entrylen = (addr_cells + size_cells) * sizeof(cell_t);
-
- if ((prop->val.len % entrylen) != 0)
- FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) "
- "(#address-cells == %d, #size-cells == %d)",
- node->fullpath, prop->val.len, addr_cells, size_cells);
-}
-NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells);
-
-static void check_ranges_format(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *prop;
- int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
-
- prop = get_property(node, "ranges");
- if (!prop)
- return;
-
- if (!node->parent) {
- FAIL(c, "Root node has a \"ranges\" property");
- return;
- }
-
- p_addr_cells = node_addr_cells(node->parent);
- p_size_cells = node_size_cells(node->parent);
- c_addr_cells = node_addr_cells(node);
- c_size_cells = node_size_cells(node);
- entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t);
-
- if (prop->val.len == 0) {
- if (p_addr_cells != c_addr_cells)
- FAIL(c, "%s has empty \"ranges\" property but its "
- "#address-cells (%d) differs from %s (%d)",
- node->fullpath, c_addr_cells, node->parent->fullpath,
- p_addr_cells);
- if (p_size_cells != c_size_cells)
- FAIL(c, "%s has empty \"ranges\" property but its "
- "#size-cells (%d) differs from %s (%d)",
- node->fullpath, c_size_cells, node->parent->fullpath,
- p_size_cells);
- } else if ((prop->val.len % entrylen) != 0) {
- FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) "
- "(parent #address-cells == %d, child #address-cells == %d, "
- "#size-cells == %d)", node->fullpath, prop->val.len,
- p_addr_cells, c_addr_cells, c_size_cells);
- }
-}
-NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells);
-
-/*
- * Style checks
- */
-static void check_avoid_default_addr_size(struct check *c, struct node *dt,
- struct node *node)
-{
- struct property *reg, *ranges;
-
- if (!node->parent)
- return; /* Ignore root node */
-
- reg = get_property(node, "reg");
- ranges = get_property(node, "ranges");
-
- if (!reg && !ranges)
- return;
-
- if ((node->parent->addr_cells == -1))
- FAIL(c, "Relying on default #address-cells value for %s",
- node->fullpath);
-
- if ((node->parent->size_cells == -1))
- FAIL(c, "Relying on default #size-cells value for %s",
- node->fullpath);
-}
-NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells);
-
-static void check_obsolete_chosen_interrupt_controller(struct check *c,
- struct node *dt)
-{
- struct node *chosen;
- struct property *prop;
-
- chosen = get_node_by_path(dt, "/chosen");
- if (!chosen)
- return;
-
- prop = get_property(chosen, "interrupt-controller");
- if (prop)
- FAIL(c, "/chosen has obsolete \"interrupt-controller\" "
- "property");
-}
-TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
-
-static struct check *check_table[] = {
- &duplicate_node_names, &duplicate_property_names,
- &node_name_chars, &node_name_format, &property_name_chars,
- &name_is_string, &name_properties,
- &explicit_phandles,
- &phandle_references, &path_references,
-
- &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell,
- &device_type_is_string, &model_is_string, &status_is_string,
-
- &addr_size_cells, ®_format, &ranges_format,
-
- &avoid_default_addr_size,
- &obsolete_chosen_interrupt_controller,
-};
-
-void process_checks(int force, struct boot_info *bi)
-{
- struct node *dt = bi->dt;
- int i;
- int error = 0;
-
- for (i = 0; i < ARRAY_SIZE(check_table); i++) {
- struct check *c = check_table[i];
-
- if (c->level != IGNORE)
- error = error || run_check(c, dt);
- }
-
- if (error) {
- if (!force) {
- fprintf(stderr, "ERROR: Input tree has errors, aborting "
- "(use -f to force output)\n");
- exit(2);
- } else if (quiet < 3) {
- fprintf(stderr, "Warning: Input tree has errors, "
- "output forced\n");
- }
- }
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-void data_free(struct data d)
-{
- struct marker *m, *nm;
-
- m = d.markers;
- while (m) {
- nm = m->next;
- free(m->ref);
- free(m);
- m = nm;
- }
-
- if (d.val)
- free(d.val);
-}
-
-struct data data_grow_for(struct data d, int xlen)
-{
- struct data nd;
- int newsize;
-
- if (xlen == 0)
- return d;
-
- nd = d;
-
- newsize = xlen;
-
- while ((d.len + xlen) > newsize)
- newsize *= 2;
-
- nd.val = xrealloc(d.val, newsize);
-
- return nd;
-}
-
-struct data data_copy_mem(const char *mem, int len)
-{
- struct data d;
-
- d = data_grow_for(empty_data, len);
-
- d.len = len;
- memcpy(d.val, mem, len);
-
- return d;
-}
-
-static char get_oct_char(const char *s, int *i)
-{
- char x[4];
- char *endx;
- long val;
-
- x[3] = '\0';
- strncpy(x, s + *i, 3);
-
- val = strtol(x, &endx, 8);
-
- assert(endx > x);
-
- (*i) += endx - x;
- return val;
-}
-
-static char get_hex_char(const char *s, int *i)
-{
- char x[3];
- char *endx;
- long val;
-
- x[2] = '\0';
- strncpy(x, s + *i, 2);
-
- val = strtol(x, &endx, 16);
- if (!(endx > x))
- die("\\x used with no following hex digits\n");
-
- (*i) += endx - x;
- return val;
-}
-
-struct data data_copy_escape_string(const char *s, int len)
-{
- int i = 0;
- struct data d;
- char *q;
-
- d = data_grow_for(empty_data, strlen(s)+1);
-
- q = d.val;
- while (i < len) {
- char c = s[i++];
-
- if (c != '\\') {
- q[d.len++] = c;
- continue;
- }
-
- c = s[i++];
- assert(c);
- switch (c) {
- case 'a':
- q[d.len++] = '\a';
- break;
- case 'b':
- q[d.len++] = '\b';
- break;
- case 't':
- q[d.len++] = '\t';
- break;
- case 'n':
- q[d.len++] = '\n';
- break;
- case 'v':
- q[d.len++] = '\v';
- break;
- case 'f':
- q[d.len++] = '\f';
- break;
- case 'r':
- q[d.len++] = '\r';
- break;
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- i--; /* need to re-read the first digit as
- * part of the octal value */
- q[d.len++] = get_oct_char(s, &i);
- break;
- case 'x':
- q[d.len++] = get_hex_char(s, &i);
- break;
- default:
- q[d.len++] = c;
- }
- }
-
- q[d.len++] = '\0';
- return d;
-}
-
-struct data data_copy_file(FILE *f, size_t maxlen)
-{
- struct data d = empty_data;
-
- while (!feof(f) && (d.len < maxlen)) {
- size_t chunksize, ret;
-
- if (maxlen == -1)
- chunksize = 4096;
- else
- chunksize = maxlen - d.len;
-
- d = data_grow_for(d, chunksize);
- ret = fread(d.val + d.len, 1, chunksize, f);
-
- if (ferror(f))
- die("Error reading file into data: %s", strerror(errno));
-
- if (d.len + ret < d.len)
- die("Overflow reading file into data\n");
-
- d.len += ret;
- }
-
- return d;
-}
-
-struct data data_append_data(struct data d, const void *p, int len)
-{
- d = data_grow_for(d, len);
- memcpy(d.val + d.len, p, len);
- d.len += len;
- return d;
-}
-
-struct data data_insert_at_marker(struct data d, struct marker *m,
- const void *p, int len)
-{
- d = data_grow_for(d, len);
- memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset);
- memcpy(d.val + m->offset, p, len);
- d.len += len;
-
- /* Adjust all markers after the one we're inserting at */
- m = m->next;
- for_each_marker(m)
- m->offset += len;
- return d;
-}
-
-struct data data_append_markers(struct data d, struct marker *m)
-{
- struct marker **mp = &d.markers;
-
- /* Find the end of the markerlist */
- while (*mp)
- mp = &((*mp)->next);
- *mp = m;
- return d;
-}
-
-struct data data_merge(struct data d1, struct data d2)
-{
- struct data d;
- struct marker *m2 = d2.markers;
-
- d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2);
-
- /* Adjust for the length of d1 */
- for_each_marker(m2)
- m2->offset += d1.len;
-
- d2.markers = NULL; /* So data_free() doesn't clobber them */
- data_free(d2);
-
- return d;
-}
-
-struct data data_append_cell(struct data d, cell_t word)
-{
- cell_t beword = cpu_to_fdt32(word);
-
- return data_append_data(d, &beword, sizeof(beword));
-}
-
-struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
-{
- struct fdt_reserve_entry bere;
-
- bere.address = cpu_to_fdt64(re->address);
- bere.size = cpu_to_fdt64(re->size);
-
- return data_append_data(d, &bere, sizeof(bere));
-}
-
-struct data data_append_addr(struct data d, uint64_t addr)
-{
- uint64_t beaddr = cpu_to_fdt64(addr);
-
- return data_append_data(d, &beaddr, sizeof(beaddr));
-}
-
-struct data data_append_byte(struct data d, uint8_t byte)
-{
- return data_append_data(d, &byte, 1);
-}
-
-struct data data_append_zeroes(struct data d, int len)
-{
- d = data_grow_for(d, len);
-
- memset(d.val + d.len, 0, len);
- d.len += len;
- return d;
-}
-
-struct data data_append_align(struct data d, int align)
-{
- int newlen = ALIGN(d.len, align);
- return data_append_zeroes(d, newlen - d.len);
-}
-
-struct data data_add_marker(struct data d, enum markertype type, char *ref)
-{
- struct marker *m;
-
- m = xmalloc(sizeof(*m));
- m->offset = d.len;
- m->type = type;
- m->ref = ref;
- m->next = NULL;
-
- return data_append_markers(d, m);
-}
-
-int data_is_one_string(struct data d)
-{
- int i;
- int len = d.len;
-
- if (len == 0)
- return 0;
-
- for (i = 0; i < len-1; i++)
- if (d.val[i] == '\0')
- return 0;
-
- if (d.val[len-1] != '\0')
- return 0;
-
- return 1;
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-%option noyywrap nounput yylineno
-
-%x INCLUDE
-%x BYTESTRING
-%x PROPNODENAME
-%s V1
-
-PROPNODECHAR [a-zA-Z0-9,._+*#?@-]
-PATHCHAR ({PROPNODECHAR}|[/])
-LABEL [a-zA-Z_][a-zA-Z0-9_]*
-STRING \"([^\\"]|\\.)*\"
-WS [[:space:]]
-COMMENT "/*"([^*]|\*+[^*/])*\*+"/"
-LINECOMMENT "//".*\n
-
-%{
-#include "dtc.h"
-#include "srcpos.h"
-#include "dtc-parser.tab.h"
-
-
-/*#define LEXDEBUG 1*/
-
-#ifdef LEXDEBUG
-#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
-#else
-#define DPRINT(fmt, ...) do { } while (0)
-#endif
-
-static int dts_version; /* = 0 */
-
-#define BEGIN_DEFAULT() if (dts_version == 0) { \
- DPRINT("<INITIAL>\n"); \
- BEGIN(INITIAL); \
- } else { \
- DPRINT("<V1>\n"); \
- BEGIN(V1); \
- }
-
-static void push_input_file(const char *filename);
-static int pop_input_file(void);
-%}
-
-%%
-<*>"/include/"{WS}*{STRING} {
- char *name = strchr(yytext, '\"') + 1;
- yytext[yyleng-1] = '\0';
- push_input_file(name);
- }
-
-<*><<EOF>> {
- if (!pop_input_file()) {
- yyterminate();
- }
- }
-
-<*>{STRING} {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("String: %s\n", yytext);
- yylval.data = data_copy_escape_string(yytext+1,
- yyleng-2);
- yylloc.first_line = yylineno;
- return DT_STRING;
- }
-
-<*>"/dts-v1/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /dts-v1/\n");
- dts_version = 1;
- BEGIN_DEFAULT();
- return DT_V1;
- }
-
-<*>"/memreserve/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /memreserve/\n");
- BEGIN_DEFAULT();
- return DT_MEMRESERVE;
- }
-
-<*>{LABEL}: {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Label: %s\n", yytext);
- yylval.labelref = strdup(yytext);
- yylval.labelref[yyleng-1] = '\0';
- return DT_LABEL;
- }
-
-<INITIAL>[bodh]# {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- if (*yytext == 'b')
- yylval.cbase = 2;
- else if (*yytext == 'o')
- yylval.cbase = 8;
- else if (*yytext == 'd')
- yylval.cbase = 10;
- else
- yylval.cbase = 16;
- DPRINT("Base: %d\n", yylval.cbase);
- return DT_BASE;
- }
-
-<INITIAL>[0-9a-fA-F]+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LEGACYLITERAL;
- }
-
-<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LITERAL;
- }
-
-\&{LABEL} { /* label reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
-
-"&{/"{PATHCHAR}+\} { /* new-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yytext[yyleng-1] = '\0';
- DPRINT("Ref: %s\n", yytext+2);
- yylval.labelref = strdup(yytext+2);
- return DT_REF;
- }
-
-<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
-
-<BYTESTRING>[0-9a-fA-F]{2} {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.byte = strtol(yytext, NULL, 16);
- DPRINT("Byte: %02x\n", (int)yylval.byte);
- return DT_BYTE;
- }
-
-<BYTESTRING>"]" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("/BYTESTRING\n");
- BEGIN_DEFAULT();
- return ']';
- }
-
-<PROPNODENAME>{PROPNODECHAR}+ {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("PropNodeName: %s\n", yytext);
- yylval.propnodename = strdup(yytext);
- BEGIN_DEFAULT();
- return DT_PROPNODENAME;
- }
-
-"/incbin/" {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Binary Include\n");
- return DT_INCBIN;
- }
-
-<*>{WS}+ /* eat whitespace */
-<*>{COMMENT}+ /* eat C-style comments */
-<*>{LINECOMMENT}+ /* eat C++-style comments */
-
-<*>. {
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Char: %c (\\x%02x)\n", yytext[0],
- (unsigned)yytext[0]);
- if (yytext[0] == '[') {
- DPRINT("<BYTESTRING>\n");
- BEGIN(BYTESTRING);
- }
- if ((yytext[0] == '{')
- || (yytext[0] == ';')) {
- DPRINT("<PROPNODENAME>\n");
- BEGIN(PROPNODENAME);
- }
- return yytext[0];
- }
-
-%%
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
- struct dtc_file *file;
- YY_BUFFER_STATE yy_prev_buf;
- int yy_prev_lineno;
- struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH (100)
-
-static int incl_depth = 0;
-
-
-static void push_input_file(const char *filename)
-{
- struct incl_file *incl_file;
- struct dtc_file *newfile;
- struct search_path search, *searchptr = NULL;
-
- assert(filename);
-
- if (incl_depth++ >= MAX_INCLUDE_DEPTH)
- die("Includes nested too deeply");
-
- if (srcpos_file) {
- search.dir = srcpos_file->dir;
- search.next = NULL;
- search.prev = NULL;
- searchptr = &search;
- }
-
- newfile = dtc_open_file(filename, searchptr);
-
- incl_file = xmalloc(sizeof(struct incl_file));
-
- /*
- * Save current context.
- */
- incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
- incl_file->yy_prev_lineno = yylineno;
- incl_file->file = srcpos_file;
- incl_file->prev = incl_file_stack;
-
- incl_file_stack = incl_file;
-
- /*
- * Establish new context.
- */
- srcpos_file = newfile;
- yylineno = 1;
- yyin = newfile->file;
- yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
-}
-
-
-static int pop_input_file(void)
-{
- struct incl_file *incl_file;
-
- if (incl_file_stack == 0)
- return 0;
-
- dtc_close_file(srcpos_file);
-
- /*
- * Pop.
- */
- --incl_depth;
- incl_file = incl_file_stack;
- incl_file_stack = incl_file->prev;
-
- /*
- * Recover old context.
- */
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(incl_file->yy_prev_buf);
- yylineno = incl_file->yy_prev_lineno;
- srcpos_file = incl_file->file;
- yyin = incl_file->file ? incl_file->file->file : NULL;
-
- /*
- * Free old state.
- */
- free(incl_file);
-
- return 1;
-}
+++ /dev/null
-#line 2 "dtc-lexer.lex.c"
-
-#line 4 "dtc-lexer.lex.c"
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 34
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-#endif /* ! C99 */
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE yyrestart(yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#define YY_BUF_SIZE 16384
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-extern int yyleng;
-
-extern FILE *yyin, *yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
- * access to the local variable yy_act. Since yyless() is a macro, it would break
- * existing scanners that call yyless() from OUTSIDE yylex.
- * One obvious solution it to make yy_act a global. I tried that, and saw
- * a 5% performance hit in a non-yylineno scanner, because yy_act is
- * normally declared as a register variable-- so it is not worth it.
- */
- #define YY_LESS_LINENO(n) \
- do { \
- int yyl;\
- for ( yyl = n; yyl < yyleng; ++yyl )\
- if ( yytext[yyl] == '\n' )\
- --yylineno;\
- }while(0)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up yytext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-/* The following is because we cannot portably get our hands on size_t
- * (without autoconf's help, which isn't available because we want
- * flex-generated scanners to compile on their own).
- * Given that the standard has decreed that size_t exists since 1989,
- * I guess we can afford to depend on it. Manoj.
- */
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via yyrestart()), so that the user can continue scanning by
- * just pointing yyin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when yytext is formed. */
-static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow yywrap()'s to do buffer switches
- * instead of setting up a fresh yyin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void yyrestart (FILE *input_file );
-void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
-void yy_delete_buffer (YY_BUFFER_STATE b );
-void yy_flush_buffer (YY_BUFFER_STATE b );
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
-void yypop_buffer_state (void );
-
-static void yyensure_buffer_stack (void );
-static void yy_load_buffer_state (void );
-static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
-
-void *yyalloc (yy_size_t );
-void *yyrealloc (void *,yy_size_t );
-void yyfree (void * );
-
-#define yy_new_buffer yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- yy_create_buffer(yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-#define yywrap(n) 1
-#define YY_SKIP_YYWRAP
-
-typedef unsigned char YY_CHAR;
-
-FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int yylineno;
-
-int yylineno = 1;
-
-extern char *yytext;
-#define yytext_ptr yytext
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up yytext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- yyleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 20
-#define YY_END_OF_BUFFER 21
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_accept[104] =
- { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 21, 19, 16, 16, 19, 19, 19, 7, 7, 19,
- 7, 19, 19, 19, 19, 13, 14, 14, 19, 8,
- 8, 16, 0, 2, 0, 0, 9, 0, 0, 0,
- 0, 0, 0, 7, 7, 5, 0, 6, 0, 12,
- 12, 14, 14, 8, 0, 11, 9, 0, 0, 0,
- 0, 18, 0, 0, 0, 0, 8, 0, 17, 0,
- 0, 0, 0, 0, 10, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 3, 15,
- 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
-
- 0, 4, 0
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
- 2, 2, 2, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 2, 1, 4, 5, 1, 1, 6, 1, 1,
- 1, 7, 8, 8, 9, 8, 10, 11, 12, 13,
- 13, 13, 13, 13, 13, 13, 13, 14, 1, 1,
- 1, 1, 8, 8, 15, 15, 15, 15, 15, 15,
- 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
- 16, 16, 16, 16, 16, 16, 16, 17, 16, 16,
- 1, 18, 19, 1, 16, 1, 15, 20, 21, 22,
-
- 23, 15, 16, 24, 25, 16, 16, 26, 27, 28,
- 24, 16, 16, 29, 30, 31, 32, 33, 16, 17,
- 16, 16, 34, 1, 35, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst flex_int32_t yy_meta[36] =
- { 0,
- 1, 1, 1, 1, 2, 1, 2, 2, 2, 3,
- 4, 4, 4, 5, 6, 7, 7, 1, 1, 6,
- 6, 6, 6, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 8, 1
- } ;
-
-static yyconst flex_int16_t yy_base[117] =
- { 0,
- 0, 0, 30, 0, 44, 0, 67, 0, 97, 105,
- 302, 303, 35, 44, 40, 94, 112, 0, 129, 152,
- 296, 295, 159, 0, 176, 303, 0, 116, 95, 165,
- 49, 46, 102, 303, 296, 0, 0, 288, 290, 293,
- 264, 266, 270, 0, 0, 303, 0, 303, 264, 303,
- 0, 0, 195, 101, 0, 0, 0, 0, 284, 125,
- 277, 265, 225, 230, 216, 218, 0, 202, 224, 221,
- 217, 107, 196, 188, 303, 206, 179, 186, 178, 185,
- 183, 162, 161, 150, 169, 160, 145, 125, 303, 303,
- 137, 109, 190, 103, 203, 167, 108, 197, 303, 123,
-
- 29, 303, 303, 215, 221, 226, 229, 234, 240, 246,
- 250, 257, 265, 270, 275, 282
- } ;
-
-static yyconst flex_int16_t yy_def[117] =
- { 0,
- 103, 1, 1, 3, 3, 5, 103, 7, 3, 3,
- 103, 103, 103, 103, 104, 105, 103, 106, 103, 19,
- 19, 20, 103, 107, 20, 103, 108, 109, 105, 103,
- 103, 103, 104, 103, 104, 110, 111, 103, 112, 113,
- 103, 103, 103, 106, 19, 103, 20, 103, 103, 103,
- 20, 108, 109, 103, 114, 110, 111, 115, 112, 112,
- 113, 103, 103, 103, 103, 103, 114, 115, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 116, 103, 116, 103, 116,
-
- 103, 103, 0, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103
- } ;
-
-static yyconst flex_int16_t yy_nxt[339] =
- { 0,
- 12, 13, 14, 15, 12, 16, 12, 12, 12, 17,
- 18, 18, 18, 12, 19, 20, 20, 12, 12, 21,
- 19, 21, 19, 22, 20, 20, 20, 20, 20, 20,
- 20, 20, 20, 12, 12, 12, 32, 32, 102, 23,
- 12, 12, 12, 34, 20, 32, 32, 32, 32, 20,
- 20, 20, 20, 20, 24, 24, 24, 35, 25, 54,
- 54, 54, 26, 25, 25, 25, 25, 12, 13, 14,
- 15, 27, 12, 27, 27, 27, 23, 27, 27, 27,
- 12, 28, 28, 28, 12, 12, 28, 28, 28, 28,
- 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
-
- 12, 12, 29, 36, 103, 34, 17, 30, 31, 31,
- 29, 54, 54, 54, 17, 30, 31, 31, 39, 35,
- 52, 40, 52, 52, 52, 103, 78, 38, 38, 46,
- 101, 60, 79, 41, 69, 97, 42, 94, 43, 45,
- 45, 45, 46, 45, 47, 47, 93, 92, 45, 45,
- 45, 45, 47, 47, 47, 47, 47, 47, 47, 47,
- 47, 47, 47, 47, 47, 39, 47, 91, 40, 90,
- 99, 47, 47, 47, 47, 54, 54, 54, 89, 88,
- 41, 55, 87, 49, 100, 43, 51, 51, 51, 86,
- 51, 95, 95, 96, 85, 51, 51, 51, 51, 52,
-
- 99, 52, 52, 52, 95, 95, 96, 84, 46, 83,
- 82, 81, 39, 79, 100, 33, 33, 33, 33, 33,
- 33, 33, 33, 37, 80, 77, 37, 37, 37, 44,
- 40, 44, 50, 76, 50, 52, 75, 52, 74, 52,
- 52, 53, 73, 53, 53, 53, 53, 56, 56, 56,
- 72, 56, 56, 57, 71, 57, 57, 59, 59, 59,
- 59, 59, 59, 59, 59, 61, 61, 61, 61, 61,
- 61, 61, 61, 67, 70, 67, 68, 68, 68, 62,
- 68, 68, 98, 98, 98, 98, 98, 98, 98, 98,
- 60, 66, 65, 64, 63, 62, 60, 58, 103, 48,
-
- 48, 103, 11, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103
- } ;
-
-static yyconst flex_int16_t yy_chk[339] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 3, 13, 13, 101, 3,
- 3, 3, 3, 15, 3, 14, 14, 32, 32, 3,
- 3, 3, 3, 3, 5, 5, 5, 15, 5, 31,
- 31, 31, 5, 5, 5, 5, 5, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-
- 7, 7, 9, 16, 29, 33, 9, 9, 9, 9,
- 10, 54, 54, 54, 10, 10, 10, 10, 17, 33,
- 28, 17, 28, 28, 28, 100, 72, 16, 29, 28,
- 97, 60, 72, 17, 60, 94, 17, 92, 17, 19,
- 19, 19, 19, 19, 19, 19, 91, 88, 19, 19,
- 19, 19, 19, 19, 19, 19, 19, 19, 19, 19,
- 19, 19, 20, 20, 20, 23, 20, 87, 23, 86,
- 96, 20, 20, 20, 20, 30, 30, 30, 85, 84,
- 23, 30, 83, 23, 96, 23, 25, 25, 25, 82,
- 25, 93, 93, 93, 81, 25, 25, 25, 25, 53,
-
- 98, 53, 53, 53, 95, 95, 95, 80, 53, 79,
- 78, 77, 76, 74, 98, 104, 104, 104, 104, 104,
- 104, 104, 104, 105, 73, 71, 105, 105, 105, 106,
- 70, 106, 107, 69, 107, 108, 68, 108, 66, 108,
- 108, 109, 65, 109, 109, 109, 109, 110, 110, 110,
- 64, 110, 110, 111, 63, 111, 111, 112, 112, 112,
- 112, 112, 112, 112, 112, 113, 113, 113, 113, 113,
- 113, 113, 113, 114, 62, 114, 115, 115, 115, 61,
- 115, 115, 116, 116, 116, 116, 116, 116, 116, 116,
- 59, 49, 43, 42, 41, 40, 39, 38, 35, 22,
-
- 21, 11, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
- 103, 103, 103, 103, 103, 103, 103, 103
- } ;
-
-/* Table of booleans, true if rule could match eol. */
-static yyconst flex_int32_t yy_rule_can_match_eol[21] =
- { 0,
-1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
- 0, };
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-extern int yy_flex_debug;
-int yy_flex_debug = 0;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *yytext;
-#line 1 "dtc-lexer.l"
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-
-
-
-#line 37 "dtc-lexer.l"
-#include "dtc.h"
-#include "srcpos.h"
-#include "dtc-parser.tab.h"
-
-
-/*#define LEXDEBUG 1*/
-
-#ifdef LEXDEBUG
-#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
-#else
-#define DPRINT(fmt, ...) do { } while (0)
-#endif
-
-static int dts_version; /* = 0 */
-
-#define BEGIN_DEFAULT() if (dts_version == 0) { \
- DPRINT("<INITIAL>\n"); \
- BEGIN(INITIAL); \
- } else { \
- DPRINT("<V1>\n"); \
- BEGIN(V1); \
- }
-
-static void push_input_file(const char *filename);
-static int pop_input_file(void);
-#line 638 "dtc-lexer.lex.c"
-
-#define INITIAL 0
-#define INCLUDE 1
-#define BYTESTRING 2
-#define PROPNODENAME 3
-#define V1 4
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int yywrap (void );
-#else
-extern int yywrap (void );
-#endif
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#define YY_READ_BUF_SIZE 8192
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO fwrite( yytext, yyleng, 1, yyout )
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- int n; \
- for ( n = 0; n < max_size && \
- (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(yyin); \
- } \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int yylex (void);
-
-#define YY_DECL int yylex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after yytext and yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
-#line 64 "dtc-lexer.l"
-
-#line 795 "dtc-lexer.lex.c"
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! yyin )
- yyin = stdin;
-
- if ( ! yyout )
- yyout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of yytext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
-yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 303 );
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
- if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
- {
- int yyl;
- for ( yyl = 0; yyl < yyleng; ++yyl )
- if ( yytext[yyl] == '\n' )
-
- yylineno++;
-;
- }
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = (yy_hold_char);
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
-
-case 1:
-/* rule 1 can match eol */
-YY_RULE_SETUP
-#line 65 "dtc-lexer.l"
-{
- char *name = strchr(yytext, '\"') + 1;
- yytext[yyleng-1] = '\0';
- push_input_file(name);
- }
- YY_BREAK
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(INCLUDE):
-case YY_STATE_EOF(BYTESTRING):
-case YY_STATE_EOF(PROPNODENAME):
-case YY_STATE_EOF(V1):
-#line 71 "dtc-lexer.l"
-{
- if (!pop_input_file()) {
- yyterminate();
- }
- }
- YY_BREAK
-case 2:
-/* rule 2 can match eol */
-YY_RULE_SETUP
-#line 77 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("String: %s\n", yytext);
- yylval.data = data_copy_escape_string(yytext+1,
- yyleng-2);
- yylloc.first_line = yylineno;
- return DT_STRING;
- }
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-#line 87 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /dts-v1/\n");
- dts_version = 1;
- BEGIN_DEFAULT();
- return DT_V1;
- }
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-#line 96 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Keyword: /memreserve/\n");
- BEGIN_DEFAULT();
- return DT_MEMRESERVE;
- }
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-#line 104 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Label: %s\n", yytext);
- yylval.labelref = strdup(yytext);
- yylval.labelref[yyleng-1] = '\0';
- return DT_LABEL;
- }
- YY_BREAK
-case 6:
-YY_RULE_SETUP
-#line 113 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- if (*yytext == 'b')
- yylval.cbase = 2;
- else if (*yytext == 'o')
- yylval.cbase = 8;
- else if (*yytext == 'd')
- yylval.cbase = 10;
- else
- yylval.cbase = 16;
- DPRINT("Base: %d\n", yylval.cbase);
- return DT_BASE;
- }
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 128 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LEGACYLITERAL;
- }
- YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 136 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.literal = strdup(yytext);
- DPRINT("Literal: '%s'\n", yylval.literal);
- return DT_LITERAL;
- }
- YY_BREAK
-case 9:
-YY_RULE_SETUP
-#line 144 "dtc-lexer.l"
-{ /* label reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-#line 152 "dtc-lexer.l"
-{ /* new-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yytext[yyleng-1] = '\0';
- DPRINT("Ref: %s\n", yytext+2);
- yylval.labelref = strdup(yytext+2);
- return DT_REF;
- }
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 161 "dtc-lexer.l"
-{ /* old-style path reference */
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Ref: %s\n", yytext+1);
- yylval.labelref = strdup(yytext+1);
- return DT_REF;
- }
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-#line 169 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- yylval.byte = strtol(yytext, NULL, 16);
- DPRINT("Byte: %02x\n", (int)yylval.byte);
- return DT_BYTE;
- }
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-#line 177 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("/BYTESTRING\n");
- BEGIN_DEFAULT();
- return ']';
- }
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-#line 185 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("PropNodeName: %s\n", yytext);
- yylval.propnodename = strdup(yytext);
- BEGIN_DEFAULT();
- return DT_PROPNODENAME;
- }
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-#line 194 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Binary Include\n");
- return DT_INCBIN;
- }
- YY_BREAK
-case 16:
-/* rule 16 can match eol */
-YY_RULE_SETUP
-#line 201 "dtc-lexer.l"
-/* eat whitespace */
- YY_BREAK
-case 17:
-/* rule 17 can match eol */
-YY_RULE_SETUP
-#line 202 "dtc-lexer.l"
-/* eat C-style comments */
- YY_BREAK
-case 18:
-/* rule 18 can match eol */
-YY_RULE_SETUP
-#line 203 "dtc-lexer.l"
-/* eat C++-style comments */
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-#line 205 "dtc-lexer.l"
-{
- yylloc.file = srcpos_file;
- yylloc.first_line = yylineno;
- DPRINT("Char: %c (\\x%02x)\n", yytext[0],
- (unsigned)yytext[0]);
- if (yytext[0] == '[') {
- DPRINT("<BYTESTRING>\n");
- BEGIN(BYTESTRING);
- }
- if ((yytext[0] == '{')
- || (yytext[0] == ';')) {
- DPRINT("<PROPNODENAME>\n");
- BEGIN(PROPNODENAME);
- }
- return yytext[0];
- }
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-#line 222 "dtc-lexer.l"
-ECHO;
- YY_BREAK
-#line 1120 "dtc-lexer.lex.c"
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed yyin at a new source and called
- * yylex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( yywrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * yytext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of yylex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- yyrestart(yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 104 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 103);
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- yyrestart(yyin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( yywrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve yytext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- if ( c == '\n' )
-
- yylineno++;
-;
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void yyrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- yy_create_buffer(yyin,YY_BUF_SIZE );
- }
-
- yy_init_buffer(YY_CURRENT_BUFFER,input_file );
- yy_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * yypop_buffer_state();
- * yypush_buffer_state(new_buffer);
- */
- yyensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- yy_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (yywrap()) processing, but the only time this flag
- * is looked at is after yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void yy_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- yy_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with yy_create_buffer()
- *
- */
- void yy_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- yyfree((void *) b->yy_ch_buf );
-
- yyfree((void *) b );
-}
-
-#ifndef __cplusplus
-extern int isatty (int );
-#endif /* __cplusplus */
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a yyrestart() or at EOF.
- */
- static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- yy_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then yy_init_buffer was _probably_
- * called from yyrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
- */
- void yy_flush_buffer (YY_BUFFER_STATE b )
-{
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == YY_CURRENT_BUFFER )
- yy_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- * the current state. This function will allocate the stack
- * if necessary.
- * @param new_buffer The new state.
- *
- */
-void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
- if (new_buffer == NULL)
- return;
-
- yyensure_buffer_stack();
-
- /* This block is copied from yy_switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from yy_switch_to_buffer. */
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- * The next element becomes the new top.
- *
- */
-void yypop_buffer_state (void)
-{
- if (!YY_CURRENT_BUFFER)
- return;
-
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
-}
-
-/* Allocates the stack if it does not exist.
- * Guarantees space for at least one push.
- */
-static void yyensure_buffer_stack (void)
-{
- int num_to_alloc;
-
- if (!(yy_buffer_stack)) {
-
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
- */
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
-{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- yy_switch_to_buffer(b );
-
- return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to yylex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- *
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- * yy_scan_bytes() instead.
- */
-YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
-{
-
- return yy_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
- * scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
-{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) yyalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = yy_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- yytext[yyleng] = (yy_hold_char); \
- (yy_c_buf_p) = yytext + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- yyleng = yyless_macro_arg; \
- } \
- while ( 0 )
-
-/* Accessor methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- *
- */
-int yyget_lineno (void)
-{
-
- return yylineno;
-}
-
-/** Get the input stream.
- *
- */
-FILE *yyget_in (void)
-{
- return yyin;
-}
-
-/** Get the output stream.
- *
- */
-FILE *yyget_out (void)
-{
- return yyout;
-}
-
-/** Get the length of the current token.
- *
- */
-int yyget_leng (void)
-{
- return yyleng;
-}
-
-/** Get the current token.
- *
- */
-
-char *yyget_text (void)
-{
- return yytext;
-}
-
-/** Set the current line number.
- * @param line_number
- *
- */
-void yyset_lineno (int line_number )
-{
-
- yylineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- *
- * @see yy_switch_to_buffer
- */
-void yyset_in (FILE * in_str )
-{
- yyin = in_str ;
-}
-
-void yyset_out (FILE * out_str )
-{
- yyout = out_str ;
-}
-
-int yyget_debug (void)
-{
- return yy_flex_debug;
-}
-
-void yyset_debug (int bdebug )
-{
- yy_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
- /* Initialization is the same as for the non-reentrant scanner.
- * This function is called from yylex_destroy(), so don't allocate here.
- */
-
- /* We do not touch yylineno unless the option is enabled. */
- yylineno = 1;
-
- (yy_buffer_stack) = 0;
- (yy_buffer_stack_top) = 0;
- (yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
- (yy_init) = 0;
- (yy_start) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
- yyin = stdin;
- yyout = stdout;
-#else
- yyin = (FILE *) 0;
- yyout = (FILE *) 0;
-#endif
-
- /* For future reference: Set errno on error, since we are called by
- * yylex_init()
- */
- return 0;
-}
-
-/* yylex_destroy is for both reentrant and non-reentrant scanners. */
-int yylex_destroy (void)
-{
-
- /* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- yypop_buffer_state();
- }
-
- /* Destroy the stack itself. */
- yyfree((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
-
- /* Reset the globals. This is important in a non-reentrant scanner so the next time
- * yylex() is called, initialization will occur. */
- yy_init_globals( );
-
- return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-}
-#endif
-
-void *yyalloc (yy_size_t size )
-{
- return (void *) malloc( size );
-}
-
-void *yyrealloc (void * ptr, yy_size_t size )
-{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-}
-
-void yyfree (void * ptr )
-{
- free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-#line 222 "dtc-lexer.l"
-
-
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
- struct dtc_file *file;
- YY_BUFFER_STATE yy_prev_buf;
- int yy_prev_lineno;
- struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH (100)
-
-static int incl_depth = 0;
-
-
-static void push_input_file(const char *filename)
-{
- struct incl_file *incl_file;
- struct dtc_file *newfile;
- struct search_path search, *searchptr = NULL;
-
- assert(filename);
-
- if (incl_depth++ >= MAX_INCLUDE_DEPTH)
- die("Includes nested too deeply");
-
- if (srcpos_file) {
- search.dir = srcpos_file->dir;
- search.next = NULL;
- search.prev = NULL;
- searchptr = &search;
- }
-
- newfile = dtc_open_file(filename, searchptr);
-
- incl_file = xmalloc(sizeof(struct incl_file));
-
- /*
- * Save current context.
- */
- incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
- incl_file->yy_prev_lineno = yylineno;
- incl_file->file = srcpos_file;
- incl_file->prev = incl_file_stack;
-
- incl_file_stack = incl_file;
-
- /*
- * Establish new context.
- */
- srcpos_file = newfile;
- yylineno = 1;
- yyin = newfile->file;
- yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
-}
-
-
-static int pop_input_file(void)
-{
- struct incl_file *incl_file;
-
- if (incl_file_stack == 0)
- return 0;
-
- dtc_close_file(srcpos_file);
-
- /*
- * Pop.
- */
- --incl_depth;
- incl_file = incl_file_stack;
- incl_file_stack = incl_file->prev;
-
- /*
- * Recover old context.
- */
- yy_delete_buffer(YY_CURRENT_BUFFER);
- yy_switch_to_buffer(incl_file->yy_prev_buf);
- yylineno = incl_file->yy_prev_lineno;
- srcpos_file = incl_file->file;
- yyin = incl_file->file ? incl_file->file->file : NULL;
-
- /*
- * Free old state.
- */
- free(incl_file);
-
- return 1;
-}
-
+++ /dev/null
-/* A Bison parser, made by GNU Bison 2.3. */
-
-/* Skeleton implementation for Bison's Yacc-like parsers in C
-
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* C LALR(1) parser skeleton written by Richard Stallman, by
- simplifying the original so-called "semantic" parser. */
-
-/* All symbols defined below should begin with yy or YY, to avoid
- infringing on user name space. This should be done even for local
- variables, as they might otherwise be expanded by user macros.
- There are some unavoidable exceptions within include files to
- define necessary library symbols; they are noted "INFRINGES ON
- USER NAME SPACE" below. */
-
-/* Identify Bison output. */
-#define YYBISON 1
-
-/* Bison version. */
-#define YYBISON_VERSION "2.3"
-
-/* Skeleton name. */
-#define YYSKELETON_NAME "yacc.c"
-
-/* Pure parsers. */
-#define YYPURE 0
-
-/* Using locations. */
-#define YYLSP_NEEDED 1
-
-
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- DT_V1 = 258,
- DT_MEMRESERVE = 259,
- DT_PROPNODENAME = 260,
- DT_LITERAL = 261,
- DT_LEGACYLITERAL = 262,
- DT_BASE = 263,
- DT_BYTE = 264,
- DT_STRING = 265,
- DT_LABEL = 266,
- DT_REF = 267,
- DT_INCBIN = 268
- };
-#endif
-/* Tokens. */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
-
-
-
-/* Copy the first part of user declarations. */
-#line 23 "dtc-parser.y"
-
-#include <stdio.h>
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern int yylex(void);
-
-extern struct boot_info *the_boot_info;
-extern int treesource_error;
-
-static unsigned long long eval_literal(const char *s, int base, int bits);
-
-
-/* Enabling traces. */
-#ifndef YYDEBUG
-# define YYDEBUG 0
-#endif
-
-/* Enabling verbose error messages. */
-#ifdef YYERROR_VERBOSE
-# undef YYERROR_VERBOSE
-# define YYERROR_VERBOSE 1
-#else
-# define YYERROR_VERBOSE 0
-#endif
-
-/* Enabling the token table. */
-#ifndef YYTOKEN_TABLE
-# define YYTOKEN_TABLE 0
-#endif
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-#line 37 "dtc-parser.y"
-{
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-/* Line 187 of yacc.c. */
-#line 153 "dtc-parser.tab.c"
- YYSTYPE;
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
- int first_line;
- int first_column;
- int last_line;
- int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-
-/* Copy the second part of user declarations. */
-
-
-/* Line 216 of yacc.c. */
-#line 178 "dtc-parser.tab.c"
-
-#ifdef short
-# undef short
-#endif
-
-#ifdef YYTYPE_UINT8
-typedef YYTYPE_UINT8 yytype_uint8;
-#else
-typedef unsigned char yytype_uint8;
-#endif
-
-#ifdef YYTYPE_INT8
-typedef YYTYPE_INT8 yytype_int8;
-#elif (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-typedef signed char yytype_int8;
-#else
-typedef short int yytype_int8;
-#endif
-
-#ifdef YYTYPE_UINT16
-typedef YYTYPE_UINT16 yytype_uint16;
-#else
-typedef unsigned short int yytype_uint16;
-#endif
-
-#ifdef YYTYPE_INT16
-typedef YYTYPE_INT16 yytype_int16;
-#else
-typedef short int yytype_int16;
-#endif
-
-#ifndef YYSIZE_T
-# ifdef __SIZE_TYPE__
-# define YYSIZE_T __SIZE_TYPE__
-# elif defined size_t
-# define YYSIZE_T size_t
-# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
-# define YYSIZE_T size_t
-# else
-# define YYSIZE_T unsigned int
-# endif
-#endif
-
-#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
-
-#ifndef YY_
-# if YYENABLE_NLS
-# if ENABLE_NLS
-# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
-# define YY_(msgid) dgettext ("bison-runtime", msgid)
-# endif
-# endif
-# ifndef YY_
-# define YY_(msgid) msgid
-# endif
-#endif
-
-/* Suppress unused-variable warnings by "using" E. */
-#if ! defined lint || defined __GNUC__
-# define YYUSE(e) ((void) (e))
-#else
-# define YYUSE(e) /* empty */
-#endif
-
-/* Identity function, used to suppress warnings about constant conditions. */
-#ifndef lint
-# define YYID(n) (n)
-#else
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static int
-YYID (int i)
-#else
-static int
-YYID (i)
- int i;
-#endif
-{
- return i;
-}
-#endif
-
-#if ! defined yyoverflow || YYERROR_VERBOSE
-
-/* The parser invokes alloca or malloc; define the necessary symbols. */
-
-# ifdef YYSTACK_USE_ALLOCA
-# if YYSTACK_USE_ALLOCA
-# ifdef __GNUC__
-# define YYSTACK_ALLOC __builtin_alloca
-# elif defined __BUILTIN_VA_ARG_INCR
-# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
-# elif defined _AIX
-# define YYSTACK_ALLOC __alloca
-# elif defined _MSC_VER
-# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
-# define alloca _alloca
-# else
-# define YYSTACK_ALLOC alloca
-# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
-# endif
-# endif
-# endif
-# endif
-# endif
-
-# ifdef YYSTACK_ALLOC
- /* Pacify GCC's `empty if-body' warning. */
-# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
-# ifndef YYSTACK_ALLOC_MAXIMUM
- /* The OS might guarantee only one guard page at the bottom of the stack,
- and a page size can be as small as 4096 bytes. So we cannot safely
- invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
- to allow for a few compiler-allocated temporary stack slots. */
-# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
-# endif
-# else
-# define YYSTACK_ALLOC YYMALLOC
-# define YYSTACK_FREE YYFREE
-# ifndef YYSTACK_ALLOC_MAXIMUM
-# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
-# endif
-# if (defined __cplusplus && ! defined _STDLIB_H \
- && ! ((defined YYMALLOC || defined malloc) \
- && (defined YYFREE || defined free)))
-# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
-# ifndef _STDLIB_H
-# define _STDLIB_H 1
-# endif
-# endif
-# ifndef YYMALLOC
-# define YYMALLOC malloc
-# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# ifndef YYFREE
-# define YYFREE free
-# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-void free (void *); /* INFRINGES ON USER NAME SPACE */
-# endif
-# endif
-# endif
-#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
-
-
-#if (! defined yyoverflow \
- && (! defined __cplusplus \
- || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
- && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
-
-/* A type that is properly aligned for any stack member. */
-union yyalloc
-{
- yytype_int16 yyss;
- YYSTYPE yyvs;
- YYLTYPE yyls;
-};
-
-/* The size of the maximum gap between one aligned stack and the next. */
-# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
-
-/* The size of an array large to enough to hold all stacks, each with
- N elements. */
-# define YYSTACK_BYTES(N) \
- ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
- + 2 * YYSTACK_GAP_MAXIMUM)
-
-/* Copy COUNT objects from FROM to TO. The source and destination do
- not overlap. */
-# ifndef YYCOPY
-# if defined __GNUC__ && 1 < __GNUC__
-# define YYCOPY(To, From, Count) \
- __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
-# else
-# define YYCOPY(To, From, Count) \
- do \
- { \
- YYSIZE_T yyi; \
- for (yyi = 0; yyi < (Count); yyi++) \
- (To)[yyi] = (From)[yyi]; \
- } \
- while (YYID (0))
-# endif
-# endif
-
-/* Relocate STACK from its old location to the new one. The
- local variables YYSIZE and YYSTACKSIZE give the old and new number of
- elements in the stack, and YYPTR gives the new location of the
- stack. Advance YYPTR to a properly aligned location for the next
- stack. */
-# define YYSTACK_RELOCATE(Stack) \
- do \
- { \
- YYSIZE_T yynewbytes; \
- YYCOPY (&yyptr->Stack, Stack, yysize); \
- Stack = &yyptr->Stack; \
- yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
- yyptr += yynewbytes / sizeof (*yyptr); \
- } \
- while (YYID (0))
-
-#endif
-
-/* YYFINAL -- State number of the termination state. */
-#define YYFINAL 9
-/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 73
-
-/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 27
-/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 20
-/* YYNRULES -- Number of rules. */
-#define YYNRULES 45
-/* YYNRULES -- Number of states. */
-#define YYNSTATES 76
-
-/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
-#define YYUNDEFTOK 2
-#define YYMAXUTOK 268
-
-#define YYTRANSLATE(YYX) \
- ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
-
-/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
-static const yytype_uint8 yytranslate[] =
-{
- 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 24, 26, 2, 2, 25, 15, 2, 16, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 14,
- 20, 19, 21, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 22, 2, 23, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 17, 2, 18, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
- 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
- 5, 6, 7, 8, 9, 10, 11, 12, 13
-};
-
-#if YYDEBUG
-/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
- YYRHS. */
-static const yytype_uint8 yyprhs[] =
-{
- 0, 0, 3, 8, 11, 12, 15, 21, 22, 25,
- 27, 34, 36, 38, 41, 47, 48, 51, 57, 61,
- 64, 69, 74, 77, 87, 93, 96, 97, 100, 103,
- 104, 107, 110, 113, 114, 116, 118, 121, 122, 125,
- 128, 129, 132, 135, 139, 140
-};
-
-/* YYRHS -- A `-1'-separated list of the rules' RHS. */
-static const yytype_int8 yyrhs[] =
-{
- 28, 0, -1, 3, 14, 29, 34, -1, 31, 34,
- -1, -1, 30, 29, -1, 46, 4, 33, 33, 14,
- -1, -1, 32, 31, -1, 30, -1, 46, 4, 33,
- 15, 33, 14, -1, 6, -1, 7, -1, 16, 35,
- -1, 17, 36, 44, 18, 14, -1, -1, 36, 37,
- -1, 46, 5, 19, 38, 14, -1, 46, 5, 14,
- -1, 39, 10, -1, 39, 20, 40, 21, -1, 39,
- 22, 43, 23, -1, 39, 12, -1, 39, 13, 24,
- 10, 25, 33, 25, 33, 26, -1, 39, 13, 24,
- 10, 26, -1, 38, 11, -1, -1, 38, 25, -1,
- 39, 11, -1, -1, 40, 42, -1, 40, 12, -1,
- 40, 11, -1, -1, 8, -1, 6, -1, 41, 7,
- -1, -1, 43, 9, -1, 43, 11, -1, -1, 45,
- 44, -1, 45, 37, -1, 46, 5, 35, -1, -1,
- 11, -1
-};
-
-/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
-static const yytype_uint16 yyrline[] =
-{
- 0, 89, 89, 93, 101, 104, 111, 119, 122, 129,
- 133, 140, 144, 151, 158, 166, 169, 176, 180, 187,
- 191, 195, 199, 203, 220, 231, 239, 242, 246, 254,
- 257, 261, 266, 274, 277, 281, 285, 293, 296, 300,
- 308, 311, 315, 323, 331, 334
-};
-#endif
-
-#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
-/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
- First, the terminals, then, starting at YYNTOKENS, nonterminals. */
-static const char *const yytname[] =
-{
- "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
- "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
- "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
- "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
- "')'", "$accept", "sourcefile", "memreserves", "memreserve",
- "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
- "proplist", "propdef", "propdata", "propdataprefix", "celllist",
- "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
-};
-#endif
-
-# ifdef YYPRINT
-/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
- token YYLEX-NUM. */
-static const yytype_uint16 yytoknum[] =
-{
- 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
- 265, 266, 267, 268, 59, 45, 47, 123, 125, 61,
- 60, 62, 91, 93, 40, 44, 41
-};
-# endif
-
-/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
-static const yytype_uint8 yyr1[] =
-{
- 0, 27, 28, 28, 29, 29, 30, 31, 31, 32,
- 32, 33, 33, 34, 35, 36, 36, 37, 37, 38,
- 38, 38, 38, 38, 38, 38, 39, 39, 39, 40,
- 40, 40, 40, 41, 41, 42, 42, 43, 43, 43,
- 44, 44, 44, 45, 46, 46
-};
-
-/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
-static const yytype_uint8 yyr2[] =
-{
- 0, 2, 4, 2, 0, 2, 5, 0, 2, 1,
- 6, 1, 1, 2, 5, 0, 2, 5, 3, 2,
- 4, 4, 2, 9, 5, 2, 0, 2, 2, 0,
- 2, 2, 2, 0, 1, 1, 2, 0, 2, 2,
- 0, 2, 2, 3, 0, 1
-};
-
-/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
- STATE-NUM when YYTABLE doesn't specify something else to do. Zero
- means the default is an error. */
-static const yytype_uint8 yydefact[] =
-{
- 7, 0, 45, 0, 9, 0, 7, 0, 4, 1,
- 0, 3, 8, 0, 0, 4, 0, 15, 13, 11,
- 12, 0, 2, 5, 0, 40, 0, 0, 0, 16,
- 0, 40, 0, 0, 6, 0, 42, 41, 0, 10,
- 14, 18, 26, 43, 0, 0, 25, 17, 27, 19,
- 28, 22, 0, 29, 37, 0, 33, 0, 0, 35,
- 34, 32, 31, 20, 0, 30, 38, 39, 21, 0,
- 24, 36, 0, 0, 0, 23
-};
-
-/* YYDEFGOTO[NTERM-NUM]. */
-static const yytype_int8 yydefgoto[] =
-{
- -1, 3, 14, 4, 5, 6, 27, 11, 18, 25,
- 29, 44, 45, 56, 64, 65, 57, 30, 31, 7
-};
-
-/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
- STATE-NUM. */
-#define YYPACT_NINF -14
-static const yytype_int8 yypact[] =
-{
- 30, -11, -14, 7, -14, -1, 27, 13, 27, -14,
- 8, -14, -14, 40, -1, 27, 35, -14, -14, -14,
- -14, 21, -14, -14, 40, 24, 40, 28, 40, -14,
- 32, 24, 46, 38, -14, 39, -14, -14, 26, -14,
- -14, -14, -14, -14, -9, 10, -14, -14, -14, -14,
- -14, -14, 31, -14, -14, 44, -2, 3, 23, -14,
- -14, -14, -14, -14, 50, -14, -14, -14, -14, 40,
- -14, -14, 33, 40, 36, -14
-};
-
-/* YYPGOTO[NTERM-NUM]. */
-static const yytype_int8 yypgoto[] =
-{
- -14, -14, 48, 29, 53, -14, -13, 47, 34, -14,
- 37, -14, -14, -14, -14, -14, -14, 42, -14, -7
-};
-
-/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
- positive, shift that token. If negative, reduce the rule which
- number is the opposite. If zero, do what YYDEFACT says.
- If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -45
-static const yytype_int8 yytable[] =
-{
- 21, 16, 46, 8, 59, 47, 60, 9, 16, 61,
- 62, 28, 66, 33, 67, 10, 48, 13, 32, 63,
- 49, 50, 51, 52, 32, 17, 68, 19, 20, -44,
- 53, -44, 54, 1, -44, 2, 26, 15, 2, 24,
- 41, 2, 34, 17, 15, 42, 19, 20, 69, 70,
- 35, 38, 39, 40, 58, 55, 72, 71, 73, 12,
- 74, 22, 75, 23, 0, 0, 0, 0, 36, 0,
- 0, 0, 43, 37
-};
-
-static const yytype_int8 yycheck[] =
-{
- 13, 8, 11, 14, 6, 14, 8, 0, 15, 11,
- 12, 24, 9, 26, 11, 16, 25, 4, 25, 21,
- 10, 11, 12, 13, 31, 17, 23, 6, 7, 5,
- 20, 4, 22, 3, 4, 11, 15, 8, 11, 4,
- 14, 11, 14, 17, 15, 19, 6, 7, 25, 26,
- 18, 5, 14, 14, 10, 24, 69, 7, 25, 6,
- 73, 14, 26, 15, -1, -1, -1, -1, 31, -1,
- -1, -1, 38, 31
-};
-
-/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
- symbol of state STATE-NUM. */
-static const yytype_uint8 yystos[] =
-{
- 0, 3, 11, 28, 30, 31, 32, 46, 14, 0,
- 16, 34, 31, 4, 29, 30, 46, 17, 35, 6,
- 7, 33, 34, 29, 4, 36, 15, 33, 33, 37,
- 44, 45, 46, 33, 14, 18, 37, 44, 5, 14,
- 14, 14, 19, 35, 38, 39, 11, 14, 25, 10,
- 11, 12, 13, 20, 22, 24, 40, 43, 10, 6,
- 8, 11, 12, 21, 41, 42, 9, 11, 23, 25,
- 26, 7, 33, 25, 33, 26
-};
-
-#define yyerrok (yyerrstatus = 0)
-#define yyclearin (yychar = YYEMPTY)
-#define YYEMPTY (-2)
-#define YYEOF 0
-
-#define YYACCEPT goto yyacceptlab
-#define YYABORT goto yyabortlab
-#define YYERROR goto yyerrorlab
-
-
-/* Like YYERROR except do call yyerror. This remains here temporarily
- to ease the transition to the new meaning of YYERROR, for GCC.
- Once GCC version 2 has supplanted version 1, this can go. */
-
-#define YYFAIL goto yyerrlab
-
-#define YYRECOVERING() (!!yyerrstatus)
-
-#define YYBACKUP(Token, Value) \
-do \
- if (yychar == YYEMPTY && yylen == 1) \
- { \
- yychar = (Token); \
- yylval = (Value); \
- yytoken = YYTRANSLATE (yychar); \
- YYPOPSTACK (1); \
- goto yybackup; \
- } \
- else \
- { \
- yyerror (YY_("syntax error: cannot back up")); \
- YYERROR; \
- } \
-while (YYID (0))
-
-
-#define YYTERROR 1
-#define YYERRCODE 256
-
-
-/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
- If N is 0, then set CURRENT to the empty location which ends
- the previous symbol: RHS[0] (always defined). */
-
-#define YYRHSLOC(Rhs, K) ((Rhs)[K])
-#ifndef YYLLOC_DEFAULT
-# define YYLLOC_DEFAULT(Current, Rhs, N) \
- do \
- if (YYID (N)) \
- { \
- (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
- (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
- (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
- (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- } \
- else \
- { \
- (Current).first_line = (Current).last_line = \
- YYRHSLOC (Rhs, 0).last_line; \
- (Current).first_column = (Current).last_column = \
- YYRHSLOC (Rhs, 0).last_column; \
- } \
- while (YYID (0))
-#endif
-
-
-/* YY_LOCATION_PRINT -- Print the location on the stream.
- This macro was not mandated originally: define only if we know
- we won't break user code: when these are the locations we know. */
-
-#ifndef YY_LOCATION_PRINT
-# if YYLTYPE_IS_TRIVIAL
-# define YY_LOCATION_PRINT(File, Loc) \
- fprintf (File, "%d.%d-%d.%d", \
- (Loc).first_line, (Loc).first_column, \
- (Loc).last_line, (Loc).last_column)
-# else
-# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
-# endif
-#endif
-
-
-/* YYLEX -- calling `yylex' with the right arguments. */
-
-#ifdef YYLEX_PARAM
-# define YYLEX yylex (YYLEX_PARAM)
-#else
-# define YYLEX yylex ()
-#endif
-
-/* Enable debugging if requested. */
-#if YYDEBUG
-
-# ifndef YYFPRINTF
-# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
-# define YYFPRINTF fprintf
-# endif
-
-# define YYDPRINTF(Args) \
-do { \
- if (yydebug) \
- YYFPRINTF Args; \
-} while (YYID (0))
-
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
-do { \
- if (yydebug) \
- { \
- YYFPRINTF (stderr, "%s ", Title); \
- yy_symbol_print (stderr, \
- Type, Value, Location); \
- YYFPRINTF (stderr, "\n"); \
- } \
-} while (YYID (0))
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
-#else
-static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
- YYLTYPE const * const yylocationp;
-#endif
-{
- if (!yyvaluep)
- return;
- YYUSE (yylocationp);
-# ifdef YYPRINT
- if (yytype < YYNTOKENS)
- YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
-# else
- YYUSE (yyoutput);
-# endif
- switch (yytype)
- {
- default:
- break;
- }
-}
-
-
-/*--------------------------------.
-| Print this symbol on YYOUTPUT. |
-`--------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
-#else
-static void
-yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
- FILE *yyoutput;
- int yytype;
- YYSTYPE const * const yyvaluep;
- YYLTYPE const * const yylocationp;
-#endif
-{
- if (yytype < YYNTOKENS)
- YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
- else
- YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
-
- YY_LOCATION_PRINT (yyoutput, *yylocationp);
- YYFPRINTF (yyoutput, ": ");
- yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
- YYFPRINTF (yyoutput, ")");
-}
-
-/*------------------------------------------------------------------.
-| yy_stack_print -- Print the state stack from its BOTTOM up to its |
-| TOP (included). |
-`------------------------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
-#else
-static void
-yy_stack_print (bottom, top)
- yytype_int16 *bottom;
- yytype_int16 *top;
-#endif
-{
- YYFPRINTF (stderr, "Stack now");
- for (; bottom <= top; ++bottom)
- YYFPRINTF (stderr, " %d", *bottom);
- YYFPRINTF (stderr, "\n");
-}
-
-# define YY_STACK_PRINT(Bottom, Top) \
-do { \
- if (yydebug) \
- yy_stack_print ((Bottom), (Top)); \
-} while (YYID (0))
-
-
-/*------------------------------------------------.
-| Report that the YYRULE is going to be reduced. |
-`------------------------------------------------*/
-
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
-#else
-static void
-yy_reduce_print (yyvsp, yylsp, yyrule)
- YYSTYPE *yyvsp;
- YYLTYPE *yylsp;
- int yyrule;
-#endif
-{
- int yynrhs = yyr2[yyrule];
- int yyi;
- unsigned long int yylno = yyrline[yyrule];
- YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
- yyrule - 1, yylno);
- /* The symbols being reduced. */
- for (yyi = 0; yyi < yynrhs; yyi++)
- {
- fprintf (stderr, " $%d = ", yyi + 1);
- yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
- &(yyvsp[(yyi + 1) - (yynrhs)])
- , &(yylsp[(yyi + 1) - (yynrhs)]) );
- fprintf (stderr, "\n");
- }
-}
-
-# define YY_REDUCE_PRINT(Rule) \
-do { \
- if (yydebug) \
- yy_reduce_print (yyvsp, yylsp, Rule); \
-} while (YYID (0))
-
-/* Nonzero means print parse trace. It is left uninitialized so that
- multiple parsers can coexist. */
-int yydebug;
-#else /* !YYDEBUG */
-# define YYDPRINTF(Args)
-# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
-# define YY_STACK_PRINT(Bottom, Top)
-# define YY_REDUCE_PRINT(Rule)
-#endif /* !YYDEBUG */
-
-
-/* YYINITDEPTH -- initial size of the parser's stacks. */
-#ifndef YYINITDEPTH
-# define YYINITDEPTH 200
-#endif
-
-/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
- if the built-in stack extension method is used).
-
- Do not make this value too large; the results are undefined if
- YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
- evaluated with infinite-precision integer arithmetic. */
-
-#ifndef YYMAXDEPTH
-# define YYMAXDEPTH 10000
-#endif
-
-\f
-
-#if YYERROR_VERBOSE
-
-# ifndef yystrlen
-# if defined __GLIBC__ && defined _STRING_H
-# define yystrlen strlen
-# else
-/* Return the length of YYSTR. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static YYSIZE_T
-yystrlen (const char *yystr)
-#else
-static YYSIZE_T
-yystrlen (yystr)
- const char *yystr;
-#endif
-{
- YYSIZE_T yylen;
- for (yylen = 0; yystr[yylen]; yylen++)
- continue;
- return yylen;
-}
-# endif
-# endif
-
-# ifndef yystpcpy
-# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
-# define yystpcpy stpcpy
-# else
-/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
- YYDEST. */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static char *
-yystpcpy (char *yydest, const char *yysrc)
-#else
-static char *
-yystpcpy (yydest, yysrc)
- char *yydest;
- const char *yysrc;
-#endif
-{
- char *yyd = yydest;
- const char *yys = yysrc;
-
- while ((*yyd++ = *yys++) != '\0')
- continue;
-
- return yyd - 1;
-}
-# endif
-# endif
-
-# ifndef yytnamerr
-/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
- quotes and backslashes, so that it's suitable for yyerror. The
- heuristic is that double-quoting is unnecessary unless the string
- contains an apostrophe, a comma, or backslash (other than
- backslash-backslash). YYSTR is taken from yytname. If YYRES is
- null, do not copy; instead, return the length of what the result
- would have been. */
-static YYSIZE_T
-yytnamerr (char *yyres, const char *yystr)
-{
- if (*yystr == '"')
- {
- YYSIZE_T yyn = 0;
- char const *yyp = yystr;
-
- for (;;)
- switch (*++yyp)
- {
- case '\'':
- case ',':
- goto do_not_strip_quotes;
-
- case '\\':
- if (*++yyp != '\\')
- goto do_not_strip_quotes;
- /* Fall through. */
- default:
- if (yyres)
- yyres[yyn] = *yyp;
- yyn++;
- break;
-
- case '"':
- if (yyres)
- yyres[yyn] = '\0';
- return yyn;
- }
- do_not_strip_quotes: ;
- }
-
- if (! yyres)
- return yystrlen (yystr);
-
- return yystpcpy (yyres, yystr) - yyres;
-}
-# endif
-
-/* Copy into YYRESULT an error message about the unexpected token
- YYCHAR while in state YYSTATE. Return the number of bytes copied,
- including the terminating null byte. If YYRESULT is null, do not
- copy anything; just return the number of bytes that would be
- copied. As a special case, return 0 if an ordinary "syntax error"
- message will do. Return YYSIZE_MAXIMUM if overflow occurs during
- size calculation. */
-static YYSIZE_T
-yysyntax_error (char *yyresult, int yystate, int yychar)
-{
- int yyn = yypact[yystate];
-
- if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
- return 0;
- else
- {
- int yytype = YYTRANSLATE (yychar);
- YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
- YYSIZE_T yysize = yysize0;
- YYSIZE_T yysize1;
- int yysize_overflow = 0;
- enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
- char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
- int yyx;
-
-# if 0
- /* This is so xgettext sees the translatable formats that are
- constructed on the fly. */
- YY_("syntax error, unexpected %s");
- YY_("syntax error, unexpected %s, expecting %s");
- YY_("syntax error, unexpected %s, expecting %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s");
- YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
-# endif
- char *yyfmt;
- char const *yyf;
- static char const yyunexpected[] = "syntax error, unexpected %s";
- static char const yyexpecting[] = ", expecting %s";
- static char const yyor[] = " or %s";
- char yyformat[sizeof yyunexpected
- + sizeof yyexpecting - 1
- + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
- * (sizeof yyor - 1))];
- char const *yyprefix = yyexpecting;
-
- /* Start YYX at -YYN if negative to avoid negative indexes in
- YYCHECK. */
- int yyxbegin = yyn < 0 ? -yyn : 0;
-
- /* Stay within bounds of both yycheck and yytname. */
- int yychecklim = YYLAST - yyn + 1;
- int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
- int yycount = 1;
-
- yyarg[0] = yytname[yytype];
- yyfmt = yystpcpy (yyformat, yyunexpected);
-
- for (yyx = yyxbegin; yyx < yyxend; ++yyx)
- if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
- {
- if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
- {
- yycount = 1;
- yysize = yysize0;
- yyformat[sizeof yyunexpected - 1] = '\0';
- break;
- }
- yyarg[yycount++] = yytname[yyx];
- yysize1 = yysize + yytnamerr (0, yytname[yyx]);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
- yyfmt = yystpcpy (yyfmt, yyprefix);
- yyprefix = yyor;
- }
-
- yyf = YY_(yyformat);
- yysize1 = yysize + yystrlen (yyf);
- yysize_overflow |= (yysize1 < yysize);
- yysize = yysize1;
-
- if (yysize_overflow)
- return YYSIZE_MAXIMUM;
-
- if (yyresult)
- {
- /* Avoid sprintf, as that infringes on the user's name space.
- Don't have undefined behavior even if the translation
- produced a string with the wrong number of "%s"s. */
- char *yyp = yyresult;
- int yyi = 0;
- while ((*yyp = *yyf) != '\0')
- {
- if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
- {
- yyp += yytnamerr (yyp, yyarg[yyi++]);
- yyf += 2;
- }
- else
- {
- yyp++;
- yyf++;
- }
- }
- }
- return yysize;
- }
-}
-#endif /* YYERROR_VERBOSE */
-\f
-
-/*-----------------------------------------------.
-| Release the memory associated to this symbol. |
-`-----------------------------------------------*/
-
-/*ARGSUSED*/
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
-#else
-static void
-yydestruct (yymsg, yytype, yyvaluep, yylocationp)
- const char *yymsg;
- int yytype;
- YYSTYPE *yyvaluep;
- YYLTYPE *yylocationp;
-#endif
-{
- YYUSE (yyvaluep);
- YYUSE (yylocationp);
-
- if (!yymsg)
- yymsg = "Deleting";
- YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
-
- switch (yytype)
- {
-
- default:
- break;
- }
-}
-\f
-
-/* Prevent warnings from -Wmissing-prototypes. */
-
-#ifdef YYPARSE_PARAM
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void *YYPARSE_PARAM);
-#else
-int yyparse ();
-#endif
-#else /* ! YYPARSE_PARAM */
-#if defined __STDC__ || defined __cplusplus
-int yyparse (void);
-#else
-int yyparse ();
-#endif
-#endif /* ! YYPARSE_PARAM */
-
-
-
-/* The look-ahead symbol. */
-int yychar;
-
-/* The semantic value of the look-ahead symbol. */
-YYSTYPE yylval;
-
-/* Number of syntax errors so far. */
-int yynerrs;
-/* Location data for the look-ahead symbol. */
-YYLTYPE yylloc;
-
-
-
-/*----------.
-| yyparse. |
-`----------*/
-
-#ifdef YYPARSE_PARAM
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void *YYPARSE_PARAM)
-#else
-int
-yyparse (YYPARSE_PARAM)
- void *YYPARSE_PARAM;
-#endif
-#else /* ! YYPARSE_PARAM */
-#if (defined __STDC__ || defined __C99__FUNC__ \
- || defined __cplusplus || defined _MSC_VER)
-int
-yyparse (void)
-#else
-int
-yyparse ()
-
-#endif
-#endif
-{
-
- int yystate;
- int yyn;
- int yyresult;
- /* Number of tokens to shift before error messages enabled. */
- int yyerrstatus;
- /* Look-ahead token as an internal (translated) token number. */
- int yytoken = 0;
-#if YYERROR_VERBOSE
- /* Buffer for error messages, and its allocated size. */
- char yymsgbuf[128];
- char *yymsg = yymsgbuf;
- YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
-
- /* Three stacks and their tools:
- `yyss': related to states,
- `yyvs': related to semantic values,
- `yyls': related to locations.
-
- Refer to the stacks thru separate pointers, to allow yyoverflow
- to reallocate them elsewhere. */
-
- /* The state stack. */
- yytype_int16 yyssa[YYINITDEPTH];
- yytype_int16 *yyss = yyssa;
- yytype_int16 *yyssp;
-
- /* The semantic value stack. */
- YYSTYPE yyvsa[YYINITDEPTH];
- YYSTYPE *yyvs = yyvsa;
- YYSTYPE *yyvsp;
-
- /* The location stack. */
- YYLTYPE yylsa[YYINITDEPTH];
- YYLTYPE *yyls = yylsa;
- YYLTYPE *yylsp;
- /* The locations where the error started and ended. */
- YYLTYPE yyerror_range[2];
-
-#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
-
- YYSIZE_T yystacksize = YYINITDEPTH;
-
- /* The variables used to return semantic value and location from the
- action routines. */
- YYSTYPE yyval;
- YYLTYPE yyloc;
-
- /* The number of symbols on the RHS of the reduced rule.
- Keep to zero when no symbol should be popped. */
- int yylen = 0;
-
- YYDPRINTF ((stderr, "Starting parse\n"));
-
- yystate = 0;
- yyerrstatus = 0;
- yynerrs = 0;
- yychar = YYEMPTY; /* Cause a token to be read. */
-
- /* Initialize stack pointers.
- Waste one element of value and location stack
- so that they stay on the same level as the state stack.
- The wasted elements are never initialized. */
-
- yyssp = yyss;
- yyvsp = yyvs;
- yylsp = yyls;
-#if YYLTYPE_IS_TRIVIAL
- /* Initialize the default location before parsing starts. */
- yylloc.first_line = yylloc.last_line = 1;
- yylloc.first_column = yylloc.last_column = 0;
-#endif
-
- goto yysetstate;
-
-/*------------------------------------------------------------.
-| yynewstate -- Push a new state, which is found in yystate. |
-`------------------------------------------------------------*/
- yynewstate:
- /* In all cases, when you get here, the value and location stacks
- have just been pushed. So pushing a state here evens the stacks. */
- yyssp++;
-
- yysetstate:
- *yyssp = yystate;
-
- if (yyss + yystacksize - 1 <= yyssp)
- {
- /* Get the current used size of the three stacks, in elements. */
- YYSIZE_T yysize = yyssp - yyss + 1;
-
-#ifdef yyoverflow
- {
- /* Give user a chance to reallocate the stack. Use copies of
- these so that the &'s don't force the real ones into
- memory. */
- YYSTYPE *yyvs1 = yyvs;
- yytype_int16 *yyss1 = yyss;
- YYLTYPE *yyls1 = yyls;
-
- /* Each stack pointer address is followed by the size of the
- data in use in that stack, in bytes. This used to be a
- conditional around just the two extra args, but that might
- be undefined if yyoverflow is a macro. */
- yyoverflow (YY_("memory exhausted"),
- &yyss1, yysize * sizeof (*yyssp),
- &yyvs1, yysize * sizeof (*yyvsp),
- &yyls1, yysize * sizeof (*yylsp),
- &yystacksize);
- yyls = yyls1;
- yyss = yyss1;
- yyvs = yyvs1;
- }
-#else /* no yyoverflow */
-# ifndef YYSTACK_RELOCATE
- goto yyexhaustedlab;
-# else
- /* Extend the stack our own way. */
- if (YYMAXDEPTH <= yystacksize)
- goto yyexhaustedlab;
- yystacksize *= 2;
- if (YYMAXDEPTH < yystacksize)
- yystacksize = YYMAXDEPTH;
-
- {
- yytype_int16 *yyss1 = yyss;
- union yyalloc *yyptr =
- (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
- if (! yyptr)
- goto yyexhaustedlab;
- YYSTACK_RELOCATE (yyss);
- YYSTACK_RELOCATE (yyvs);
- YYSTACK_RELOCATE (yyls);
-# undef YYSTACK_RELOCATE
- if (yyss1 != yyssa)
- YYSTACK_FREE (yyss1);
- }
-# endif
-#endif /* no yyoverflow */
-
- yyssp = yyss + yysize - 1;
- yyvsp = yyvs + yysize - 1;
- yylsp = yyls + yysize - 1;
-
- YYDPRINTF ((stderr, "Stack size increased to %lu\n",
- (unsigned long int) yystacksize));
-
- if (yyss + yystacksize - 1 <= yyssp)
- YYABORT;
- }
-
- YYDPRINTF ((stderr, "Entering state %d\n", yystate));
-
- goto yybackup;
-
-/*-----------.
-| yybackup. |
-`-----------*/
-yybackup:
-
- /* Do appropriate processing given the current state. Read a
- look-ahead token if we need one and don't already have one. */
-
- /* First try to decide what to do without reference to look-ahead token. */
- yyn = yypact[yystate];
- if (yyn == YYPACT_NINF)
- goto yydefault;
-
- /* Not known => get a look-ahead token if don't already have one. */
-
- /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
- if (yychar == YYEMPTY)
- {
- YYDPRINTF ((stderr, "Reading a token: "));
- yychar = YYLEX;
- }
-
- if (yychar <= YYEOF)
- {
- yychar = yytoken = YYEOF;
- YYDPRINTF ((stderr, "Now at end of input.\n"));
- }
- else
- {
- yytoken = YYTRANSLATE (yychar);
- YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
- }
-
- /* If the proper action on seeing token YYTOKEN is to reduce or to
- detect an error, take that action. */
- yyn += yytoken;
- if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
- goto yydefault;
- yyn = yytable[yyn];
- if (yyn <= 0)
- {
- if (yyn == 0 || yyn == YYTABLE_NINF)
- goto yyerrlab;
- yyn = -yyn;
- goto yyreduce;
- }
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- /* Count tokens shifted since error; after three, turn off error
- status. */
- if (yyerrstatus)
- yyerrstatus--;
-
- /* Shift the look-ahead token. */
- YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
-
- /* Discard the shifted token unless it is eof. */
- if (yychar != YYEOF)
- yychar = YYEMPTY;
-
- yystate = yyn;
- *++yyvsp = yylval;
- *++yylsp = yylloc;
- goto yynewstate;
-
-
-/*-----------------------------------------------------------.
-| yydefault -- do the default action for the current state. |
-`-----------------------------------------------------------*/
-yydefault:
- yyn = yydefact[yystate];
- if (yyn == 0)
- goto yyerrlab;
- goto yyreduce;
-
-
-/*-----------------------------.
-| yyreduce -- Do a reduction. |
-`-----------------------------*/
-yyreduce:
- /* yyn is the number of a rule to reduce with. */
- yylen = yyr2[yyn];
-
- /* If YYLEN is nonzero, implement the default value of the action:
- `$$ = $1'.
-
- Otherwise, the following line sets YYVAL to garbage.
- This behavior is undocumented and Bison
- users should not rely upon it. Assigning to YYVAL
- unconditionally makes the parser a bit smaller, and it avoids a
- GCC warning that YYVAL may be used uninitialized. */
- yyval = yyvsp[1-yylen];
-
- /* Default location. */
- YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
- YY_REDUCE_PRINT (yyn);
- switch (yyn)
- {
- case 2:
-#line 90 "dtc-parser.y"
- {
- the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
- ;}
- break;
-
- case 3:
-#line 94 "dtc-parser.y"
- {
- the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
- ;}
- break;
-
- case 4:
-#line 101 "dtc-parser.y"
- {
- (yyval.re) = NULL;
- ;}
- break;
-
- case 5:
-#line 105 "dtc-parser.y"
- {
- (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
- ;}
- break;
-
- case 6:
-#line 112 "dtc-parser.y"
- {
- (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
- ;}
- break;
-
- case 7:
-#line 119 "dtc-parser.y"
- {
- (yyval.re) = NULL;
- ;}
- break;
-
- case 8:
-#line 123 "dtc-parser.y"
- {
- (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
- ;}
- break;
-
- case 9:
-#line 130 "dtc-parser.y"
- {
- (yyval.re) = (yyvsp[(1) - (1)].re);
- ;}
- break;
-
- case 10:
-#line 134 "dtc-parser.y"
- {
- (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
- ;}
- break;
-
- case 11:
-#line 141 "dtc-parser.y"
- {
- (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
- ;}
- break;
-
- case 12:
-#line 145 "dtc-parser.y"
- {
- (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
- ;}
- break;
-
- case 13:
-#line 152 "dtc-parser.y"
- {
- (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
- ;}
- break;
-
- case 14:
-#line 159 "dtc-parser.y"
- {
- (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
- ;}
- break;
-
- case 15:
-#line 166 "dtc-parser.y"
- {
- (yyval.proplist) = NULL;
- ;}
- break;
-
- case 16:
-#line 170 "dtc-parser.y"
- {
- (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
- ;}
- break;
-
- case 17:
-#line 177 "dtc-parser.y"
- {
- (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
- ;}
- break;
-
- case 18:
-#line 181 "dtc-parser.y"
- {
- (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
- ;}
- break;
-
- case 19:
-#line 188 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
- ;}
- break;
-
- case 20:
-#line 192 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 21:
-#line 196 "dtc-parser.y"
- {
- (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
- ;}
- break;
-
- case 22:
-#line 200 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 23:
-#line 204 "dtc-parser.y"
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
- struct data d = empty_data;
-
- if ((yyvsp[(6) - (9)].addr) != 0)
- if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
- yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
- (unsigned long long)(yyvsp[(6) - (9)].addr),
- (yyvsp[(4) - (9)].data).val, strerror(errno));
-
- d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
-
- (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
- dtc_close_file(file);
- ;}
- break;
-
- case 24:
-#line 221 "dtc-parser.y"
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
- struct data d = empty_data;
-
- d = data_copy_file(file->file, -1);
-
- (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
- dtc_close_file(file);
- ;}
- break;
-
- case 25:
-#line 232 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 26:
-#line 239 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 27:
-#line 243 "dtc-parser.y"
- {
- (yyval.data) = (yyvsp[(1) - (2)].data);
- ;}
- break;
-
- case 28:
-#line 247 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 29:
-#line 254 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 30:
-#line 258 "dtc-parser.y"
- {
- (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
- ;}
- break;
-
- case 31:
-#line 262 "dtc-parser.y"
- {
- (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
- (yyvsp[(2) - (2)].labelref)), -1);
- ;}
- break;
-
- case 32:
-#line 267 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 33:
-#line 274 "dtc-parser.y"
- {
- (yyval.cbase) = 16;
- ;}
- break;
-
- case 35:
-#line 282 "dtc-parser.y"
- {
- (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
- ;}
- break;
-
- case 36:
-#line 286 "dtc-parser.y"
- {
- (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
- ;}
- break;
-
- case 37:
-#line 293 "dtc-parser.y"
- {
- (yyval.data) = empty_data;
- ;}
- break;
-
- case 38:
-#line 297 "dtc-parser.y"
- {
- (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
- ;}
- break;
-
- case 39:
-#line 301 "dtc-parser.y"
- {
- (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
- ;}
- break;
-
- case 40:
-#line 308 "dtc-parser.y"
- {
- (yyval.nodelist) = NULL;
- ;}
- break;
-
- case 41:
-#line 312 "dtc-parser.y"
- {
- (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
- ;}
- break;
-
- case 42:
-#line 316 "dtc-parser.y"
- {
- yyerror("syntax error: properties must precede subnodes");
- YYERROR;
- ;}
- break;
-
- case 43:
-#line 324 "dtc-parser.y"
- {
- (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
- ;}
- break;
-
- case 44:
-#line 331 "dtc-parser.y"
- {
- (yyval.labelref) = NULL;
- ;}
- break;
-
- case 45:
-#line 335 "dtc-parser.y"
- {
- (yyval.labelref) = (yyvsp[(1) - (1)].labelref);
- ;}
- break;
-
-
-/* Line 1267 of yacc.c. */
-#line 1780 "dtc-parser.tab.c"
- default: break;
- }
- YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
-
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
-
- *++yyvsp = yyval;
- *++yylsp = yyloc;
-
- /* Now `shift' the result of the reduction. Determine what state
- that goes to, based on the state we popped back to and the rule
- number reduced by. */
-
- yyn = yyr1[yyn];
-
- yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
- if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
- yystate = yytable[yystate];
- else
- yystate = yydefgoto[yyn - YYNTOKENS];
-
- goto yynewstate;
-
-
-/*------------------------------------.
-| yyerrlab -- here on detecting error |
-`------------------------------------*/
-yyerrlab:
- /* If not already recovering from an error, report this error. */
- if (!yyerrstatus)
- {
- ++yynerrs;
-#if ! YYERROR_VERBOSE
- yyerror (YY_("syntax error"));
-#else
- {
- YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
- if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
- {
- YYSIZE_T yyalloc = 2 * yysize;
- if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
- yyalloc = YYSTACK_ALLOC_MAXIMUM;
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
- yymsg = (char *) YYSTACK_ALLOC (yyalloc);
- if (yymsg)
- yymsg_alloc = yyalloc;
- else
- {
- yymsg = yymsgbuf;
- yymsg_alloc = sizeof yymsgbuf;
- }
- }
-
- if (0 < yysize && yysize <= yymsg_alloc)
- {
- (void) yysyntax_error (yymsg, yystate, yychar);
- yyerror (yymsg);
- }
- else
- {
- yyerror (YY_("syntax error"));
- if (yysize != 0)
- goto yyexhaustedlab;
- }
- }
-#endif
- }
-
- yyerror_range[0] = yylloc;
-
- if (yyerrstatus == 3)
- {
- /* If just tried and failed to reuse look-ahead token after an
- error, discard it. */
-
- if (yychar <= YYEOF)
- {
- /* Return failure if at end of input. */
- if (yychar == YYEOF)
- YYABORT;
- }
- else
- {
- yydestruct ("Error: discarding",
- yytoken, &yylval, &yylloc);
- yychar = YYEMPTY;
- }
- }
-
- /* Else will try to reuse look-ahead token after shifting the error
- token. */
- goto yyerrlab1;
-
-
-/*---------------------------------------------------.
-| yyerrorlab -- error raised explicitly by YYERROR. |
-`---------------------------------------------------*/
-yyerrorlab:
-
- /* Pacify compilers like GCC when the user code never invokes
- YYERROR and the label yyerrorlab therefore never appears in user
- code. */
- if (/*CONSTCOND*/ 0)
- goto yyerrorlab;
-
- yyerror_range[0] = yylsp[1-yylen];
- /* Do not reclaim the symbols of the rule which action triggered
- this YYERROR. */
- YYPOPSTACK (yylen);
- yylen = 0;
- YY_STACK_PRINT (yyss, yyssp);
- yystate = *yyssp;
- goto yyerrlab1;
-
-
-/*-------------------------------------------------------------.
-| yyerrlab1 -- common code for both syntax error and YYERROR. |
-`-------------------------------------------------------------*/
-yyerrlab1:
- yyerrstatus = 3; /* Each real token shifted decrements this. */
-
- for (;;)
- {
- yyn = yypact[yystate];
- if (yyn != YYPACT_NINF)
- {
- yyn += YYTERROR;
- if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
- {
- yyn = yytable[yyn];
- if (0 < yyn)
- break;
- }
- }
-
- /* Pop the current state because it cannot handle the error token. */
- if (yyssp == yyss)
- YYABORT;
-
- yyerror_range[0] = *yylsp;
- yydestruct ("Error: popping",
- yystos[yystate], yyvsp, yylsp);
- YYPOPSTACK (1);
- yystate = *yyssp;
- YY_STACK_PRINT (yyss, yyssp);
- }
-
- if (yyn == YYFINAL)
- YYACCEPT;
-
- *++yyvsp = yylval;
-
- yyerror_range[1] = yylloc;
- /* Using YYLLOC is tempting, but would change the location of
- the look-ahead. YYLOC is available though. */
- YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
- *++yylsp = yyloc;
-
- /* Shift the error token. */
- YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
-
- yystate = yyn;
- goto yynewstate;
-
-
-/*-------------------------------------.
-| yyacceptlab -- YYACCEPT comes here. |
-`-------------------------------------*/
-yyacceptlab:
- yyresult = 0;
- goto yyreturn;
-
-/*-----------------------------------.
-| yyabortlab -- YYABORT comes here. |
-`-----------------------------------*/
-yyabortlab:
- yyresult = 1;
- goto yyreturn;
-
-#ifndef yyoverflow
-/*-------------------------------------------------.
-| yyexhaustedlab -- memory exhaustion comes here. |
-`-------------------------------------------------*/
-yyexhaustedlab:
- yyerror (YY_("memory exhausted"));
- yyresult = 2;
- /* Fall through. */
-#endif
-
-yyreturn:
- if (yychar != YYEOF && yychar != YYEMPTY)
- yydestruct ("Cleanup: discarding lookahead",
- yytoken, &yylval, &yylloc);
- /* Do not reclaim the symbols of the rule which action triggered
- this YYABORT or YYACCEPT. */
- YYPOPSTACK (yylen);
- YY_STACK_PRINT (yyss, yyssp);
- while (yyssp != yyss)
- {
- yydestruct ("Cleanup: popping",
- yystos[*yyssp], yyvsp, yylsp);
- YYPOPSTACK (1);
- }
-#ifndef yyoverflow
- if (yyss != yyssa)
- YYSTACK_FREE (yyss);
-#endif
-#if YYERROR_VERBOSE
- if (yymsg != yymsgbuf)
- YYSTACK_FREE (yymsg);
-#endif
- /* Make sure YYID is used. */
- return YYID (yyresult);
-}
-
-
-#line 340 "dtc-parser.y"
-
-
-void yyerrorf(char const *s, ...)
-{
- const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
- va_list va;
- va_start(va, s);
-
- if (strcmp(fname, "-") == 0)
- fname = "stdin";
-
- fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
- vfprintf(stderr, s, va);
- fprintf(stderr, "\n");
-
- treesource_error = 1;
- va_end(va);
-}
-
-void yyerror (char const *s)
-{
- yyerrorf("%s", s);
-}
-
-static unsigned long long eval_literal(const char *s, int base, int bits)
-{
- unsigned long long val;
- char *e;
-
- errno = 0;
- val = strtoull(s, &e, base);
- if (*e)
- yyerror("bad characters in literal");
- else if ((errno == ERANGE)
- || ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
- else if (errno != 0)
- yyerror("bad literal");
- return val;
-}
-
+++ /dev/null
-/* A Bison parser, made by GNU Bison 2.3. */
-
-/* Skeleton interface for Bison's Yacc-like parsers in C
-
- Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
- Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
-
-/* As a special exception, you may create a larger work that contains
- part or all of the Bison parser skeleton and distribute that work
- under terms of your choice, so long as that work isn't itself a
- parser generator using the skeleton or a modified version thereof
- as a parser skeleton. Alternatively, if you modify or redistribute
- the parser skeleton itself, you may (at your option) remove this
- special exception, which will cause the skeleton and the resulting
- Bison output files to be licensed under the GNU General Public
- License without this special exception.
-
- This special exception was added by the Free Software Foundation in
- version 2.2 of Bison. */
-
-/* Tokens. */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
- /* Put the tokens into the symbol table, so that GDB and other debuggers
- know about them. */
- enum yytokentype {
- DT_V1 = 258,
- DT_MEMRESERVE = 259,
- DT_PROPNODENAME = 260,
- DT_LITERAL = 261,
- DT_LEGACYLITERAL = 262,
- DT_BASE = 263,
- DT_BYTE = 264,
- DT_STRING = 265,
- DT_LABEL = 266,
- DT_REF = 267,
- DT_INCBIN = 268
- };
-#endif
-/* Tokens. */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
-
-
-
-#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
-typedef union YYSTYPE
-#line 37 "dtc-parser.y"
-{
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-/* Line 1489 of yacc.c. */
-#line 92 "dtc-parser.tab.h"
- YYSTYPE;
-# define yystype YYSTYPE /* obsolescent; will be withdrawn */
-# define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-extern YYSTYPE yylval;
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
- int first_line;
- int first_column;
- int last_line;
- int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-extern YYLTYPE yylloc;
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-%locations
-
-%{
-#include <stdio.h>
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern int yylex(void);
-
-extern struct boot_info *the_boot_info;
-extern int treesource_error;
-
-static unsigned long long eval_literal(const char *s, int base, int bits);
-%}
-
-%union {
- char *propnodename;
- char *literal;
- char *labelref;
- unsigned int cbase;
- uint8_t byte;
- struct data data;
-
- uint64_t addr;
- cell_t cell;
- struct property *prop;
- struct property *proplist;
- struct node *node;
- struct node *nodelist;
- struct reserve_info *re;
-}
-
-%token DT_V1
-%token DT_MEMRESERVE
-%token <propnodename> DT_PROPNODENAME
-%token <literal> DT_LITERAL
-%token <literal> DT_LEGACYLITERAL
-%token <cbase> DT_BASE
-%token <byte> DT_BYTE
-%token <data> DT_STRING
-%token <labelref> DT_LABEL
-%token <labelref> DT_REF
-%token DT_INCBIN
-
-%type <data> propdata
-%type <data> propdataprefix
-%type <re> memreserve
-%type <re> memreserves
-%type <re> v0_memreserve
-%type <re> v0_memreserves
-%type <addr> addr
-%type <data> celllist
-%type <cbase> cellbase
-%type <cell> cellval
-%type <data> bytestring
-%type <prop> propdef
-%type <proplist> proplist
-
-%type <node> devicetree
-%type <node> nodedef
-%type <node> subnode
-%type <nodelist> subnodes
-%type <labelref> label
-
-%%
-
-sourcefile:
- DT_V1 ';' memreserves devicetree
- {
- the_boot_info = build_boot_info($3, $4, 0);
- }
- | v0_memreserves devicetree
- {
- the_boot_info = build_boot_info($1, $2, 0);
- }
- ;
-
-memreserves:
- /* empty */
- {
- $$ = NULL;
- }
- | memreserve memreserves
- {
- $$ = chain_reserve_entry($1, $2);
- }
- ;
-
-memreserve:
- label DT_MEMRESERVE addr addr ';'
- {
- $$ = build_reserve_entry($3, $4, $1);
- }
- ;
-
-v0_memreserves:
- /* empty */
- {
- $$ = NULL;
- }
- | v0_memreserve v0_memreserves
- {
- $$ = chain_reserve_entry($1, $2);
- };
- ;
-
-v0_memreserve:
- memreserve
- {
- $$ = $1;
- }
- | label DT_MEMRESERVE addr '-' addr ';'
- {
- $$ = build_reserve_entry($3, $5 - $3 + 1, $1);
- }
- ;
-
-addr:
- DT_LITERAL
- {
- $$ = eval_literal($1, 0, 64);
- }
- | DT_LEGACYLITERAL
- {
- $$ = eval_literal($1, 16, 64);
- }
- ;
-
-devicetree:
- '/' nodedef
- {
- $$ = name_node($2, "", NULL);
- }
- ;
-
-nodedef:
- '{' proplist subnodes '}' ';'
- {
- $$ = build_node($2, $3);
- }
- ;
-
-proplist:
- /* empty */
- {
- $$ = NULL;
- }
- | proplist propdef
- {
- $$ = chain_property($2, $1);
- }
- ;
-
-propdef:
- label DT_PROPNODENAME '=' propdata ';'
- {
- $$ = build_property($2, $4, $1);
- }
- | label DT_PROPNODENAME ';'
- {
- $$ = build_property($2, empty_data, $1);
- }
- ;
-
-propdata:
- propdataprefix DT_STRING
- {
- $$ = data_merge($1, $2);
- }
- | propdataprefix '<' celllist '>'
- {
- $$ = data_merge($1, $3);
- }
- | propdataprefix '[' bytestring ']'
- {
- $$ = data_merge($1, $3);
- }
- | propdataprefix DT_REF
- {
- $$ = data_add_marker($1, REF_PATH, $2);
- }
- | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file($4.val, &path);
- struct data d = empty_data;
-
- if ($6 != 0)
- if (fseek(file->file, $6, SEEK_SET) != 0)
- yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
- (unsigned long long)$6,
- $4.val, strerror(errno));
-
- d = data_copy_file(file->file, $8);
-
- $$ = data_merge($1, d);
- dtc_close_file(file);
- }
- | propdataprefix DT_INCBIN '(' DT_STRING ')'
- {
- struct search_path path = { srcpos_file->dir, NULL, NULL };
- struct dtc_file *file = dtc_open_file($4.val, &path);
- struct data d = empty_data;
-
- d = data_copy_file(file->file, -1);
-
- $$ = data_merge($1, d);
- dtc_close_file(file);
- }
- | propdata DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-propdataprefix:
- /* empty */
- {
- $$ = empty_data;
- }
- | propdata ','
- {
- $$ = $1;
- }
- | propdataprefix DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-celllist:
- /* empty */
- {
- $$ = empty_data;
- }
- | celllist cellval
- {
- $$ = data_append_cell($1, $2);
- }
- | celllist DT_REF
- {
- $$ = data_append_cell(data_add_marker($1, REF_PHANDLE,
- $2), -1);
- }
- | celllist DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-cellbase:
- /* empty */
- {
- $$ = 16;
- }
- | DT_BASE
- ;
-
-cellval:
- DT_LITERAL
- {
- $$ = eval_literal($1, 0, 32);
- }
- | cellbase DT_LEGACYLITERAL
- {
- $$ = eval_literal($2, $1, 32);
- }
- ;
-
-bytestring:
- /* empty */
- {
- $$ = empty_data;
- }
- | bytestring DT_BYTE
- {
- $$ = data_append_byte($1, $2);
- }
- | bytestring DT_LABEL
- {
- $$ = data_add_marker($1, LABEL, $2);
- }
- ;
-
-subnodes:
- /* empty */
- {
- $$ = NULL;
- }
- | subnode subnodes
- {
- $$ = chain_node($1, $2);
- }
- | subnode propdef
- {
- yyerror("syntax error: properties must precede subnodes");
- YYERROR;
- }
- ;
-
-subnode:
- label DT_PROPNODENAME nodedef
- {
- $$ = name_node($3, $2, $1);
- }
- ;
-
-label:
- /* empty */
- {
- $$ = NULL;
- }
- | DT_LABEL
- {
- $$ = $1;
- }
- ;
-
-%%
-
-void yyerrorf(char const *s, ...)
-{
- const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
- va_list va;
- va_start(va, s);
-
- if (strcmp(fname, "-") == 0)
- fname = "stdin";
-
- fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
- vfprintf(stderr, s, va);
- fprintf(stderr, "\n");
-
- treesource_error = 1;
- va_end(va);
-}
-
-void yyerror (char const *s)
-{
- yyerrorf("%s", s);
-}
-
-static unsigned long long eval_literal(const char *s, int base, int bits)
-{
- unsigned long long val;
- char *e;
-
- errno = 0;
- val = strtoull(s, &e, base);
- if (*e)
- yyerror("bad characters in literal");
- else if ((errno == ERANGE)
- || ((bits < 64) && (val >= (1ULL << bits))))
- yyerror("literal out of range");
- else if (errno != 0)
- yyerror("bad literal");
- return val;
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-#include "version_gen.h"
-
-/*
- * Command line options
- */
-int quiet; /* Level of quietness */
-int reservenum; /* Number of memory reservation slots */
-int minsize; /* Minimum blob size */
-int padsize; /* Additional padding to blob */
-
-char *join_path(const char *path, const char *name)
-{
- int lenp = strlen(path);
- int lenn = strlen(name);
- int len;
- int needslash = 1;
- char *str;
-
- len = lenp + lenn + 2;
- if ((lenp > 0) && (path[lenp-1] == '/')) {
- needslash = 0;
- len--;
- }
-
- str = xmalloc(len);
- memcpy(str, path, lenp);
- if (needslash) {
- str[lenp] = '/';
- lenp++;
- }
- memcpy(str+lenp, name, lenn+1);
- return str;
-}
-
-static void fill_fullpaths(struct node *tree, const char *prefix)
-{
- struct node *child;
- const char *unit;
-
- tree->fullpath = join_path(prefix, tree->name);
-
- unit = strchr(tree->name, '@');
- if (unit)
- tree->basenamelen = unit - tree->name;
- else
- tree->basenamelen = strlen(tree->name);
-
- for_each_child(tree, child)
- fill_fullpaths(child, tree->fullpath);
-}
-
-static void __attribute__ ((noreturn)) usage(void)
-{
- fprintf(stderr, "Usage:\n");
- fprintf(stderr, "\tdtc [options] <input file>\n");
- fprintf(stderr, "\nOptions:\n");
- fprintf(stderr, "\t-h\n");
- fprintf(stderr, "\t\tThis help text\n");
- fprintf(stderr, "\t-q\n");
- fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n");
- fprintf(stderr, "\t-I <input format>\n");
- fprintf(stderr, "\t\tInput formats are:\n");
- fprintf(stderr, "\t\t\tdts - device tree source text\n");
- fprintf(stderr, "\t\t\tdtb - device tree blob\n");
- fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n");
- fprintf(stderr, "\t-o <output file>\n");
- fprintf(stderr, "\t-O <output format>\n");
- fprintf(stderr, "\t\tOutput formats are:\n");
- fprintf(stderr, "\t\t\tdts - device tree source text\n");
- fprintf(stderr, "\t\t\tdtb - device tree blob\n");
- fprintf(stderr, "\t\t\tasm - assembler source\n");
- fprintf(stderr, "\t-V <output version>\n");
- fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION);
- fprintf(stderr, "\t-R <number>\n");
- fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n");
- fprintf(stderr, "\t-S <bytes>\n");
- fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n");
- fprintf(stderr, "\t-p <bytes>\n");
- fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n");
- fprintf(stderr, "\t-b <number>\n");
- fprintf(stderr, "\t\tSet the physical boot cpu\n");
- fprintf(stderr, "\t-f\n");
- fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
- fprintf(stderr, "\t-v\n");
- fprintf(stderr, "\t\tPrint DTC version and exit\n");
- exit(3);
-}
-
-int main(int argc, char *argv[])
-{
- struct boot_info *bi;
- const char *inform = "dts";
- const char *outform = "dts";
- const char *outname = "-";
- int force = 0, check = 0;
- const char *arg;
- int opt;
- FILE *outf = NULL;
- int outversion = DEFAULT_FDT_VERSION;
- long long cmdline_boot_cpuid = -1;
-
- quiet = 0;
- reservenum = 0;
- minsize = 0;
- padsize = 0;
-
- while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) {
- switch (opt) {
- case 'I':
- inform = optarg;
- break;
- case 'O':
- outform = optarg;
- break;
- case 'o':
- outname = optarg;
- break;
- case 'V':
- outversion = strtol(optarg, NULL, 0);
- break;
- case 'R':
- reservenum = strtol(optarg, NULL, 0);
- break;
- case 'S':
- minsize = strtol(optarg, NULL, 0);
- break;
- case 'p':
- padsize = strtol(optarg, NULL, 0);
- break;
- case 'f':
- force = 1;
- break;
- case 'c':
- check = 1;
- break;
- case 'q':
- quiet++;
- break;
- case 'b':
- cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
- break;
- case 'v':
- printf("Version: %s\n", DTC_VERSION);
- exit(0);
- case 'h':
- default:
- usage();
- }
- }
-
- if (argc > (optind+1))
- usage();
- else if (argc < (optind+1))
- arg = "-";
- else
- arg = argv[optind];
-
- /* minsize and padsize are mutually exclusive */
- if (minsize && padsize)
- die("Can't set both -p and -S\n");
-
- fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
- inform, outform, arg);
-
- if (streq(inform, "dts"))
- bi = dt_from_source(arg);
- else if (streq(inform, "fs"))
- bi = dt_from_fs(arg);
- else if(streq(inform, "dtb"))
- bi = dt_from_blob(arg);
- else
- die("Unknown input format \"%s\"\n", inform);
-
- if (cmdline_boot_cpuid != -1)
- bi->boot_cpuid_phys = cmdline_boot_cpuid;
-
- fill_fullpaths(bi->dt, "");
- process_checks(force, bi);
-
-
- if (streq(outname, "-")) {
- outf = stdout;
- } else {
- outf = fopen(outname, "w");
- if (! outf)
- die("Couldn't open output file %s: %s\n",
- outname, strerror(errno));
- }
-
- if (streq(outform, "dts")) {
- dt_to_source(outf, bi);
- } else if (streq(outform, "dtb")) {
- dt_to_blob(outf, bi, outversion);
- } else if (streq(outform, "asm")) {
- dt_to_asm(outf, bi, outversion);
- } else if (streq(outform, "null")) {
- /* do nothing */
- } else {
- die("Unknown output format \"%s\"\n", outform);
- }
-
- exit(0);
-}
+++ /dev/null
-#ifndef _DTC_H
-#define _DTC_H
-
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <ctype.h>
-#include <errno.h>
-#include <unistd.h>
-
-#include <libfdt_env.h>
-#include <fdt.h>
-
-#define DEFAULT_FDT_VERSION 17
-/*
- * Command line options
- */
-extern int quiet; /* Level of quietness */
-extern int reservenum; /* Number of memory reservation slots */
-extern int minsize; /* Minimum blob size */
-extern int padsize; /* Additional padding to blob */
-
-static inline void __attribute__((noreturn)) die(char * str, ...)
-{
- va_list ap;
-
- va_start(ap, str);
- fprintf(stderr, "FATAL ERROR: ");
- vfprintf(stderr, str, ap);
- exit(1);
-}
-
-static inline void *xmalloc(size_t len)
-{
- void *new = malloc(len);
-
- if (! new)
- die("malloc() failed\n");
-
- return new;
-}
-
-static inline void *xrealloc(void *p, size_t len)
-{
- void *new = realloc(p, len);
-
- if (! new)
- die("realloc() failed (len=%d)\n", len);
-
- return new;
-}
-
-typedef uint32_t cell_t;
-
-
-#define streq(a, b) (strcmp((a), (b)) == 0)
-#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0)
-
-#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/* Data blobs */
-enum markertype {
- REF_PHANDLE,
- REF_PATH,
- LABEL,
-};
-
-struct marker {
- enum markertype type;
- int offset;
- char *ref;
- struct marker *next;
-};
-
-struct data {
- int len;
- char *val;
- struct marker *markers;
-};
-
-
-#define empty_data ((struct data){ /* all .members = 0 or NULL */ })
-
-#define for_each_marker(m) \
- for (; (m); (m) = (m)->next)
-#define for_each_marker_of_type(m, t) \
- for_each_marker(m) \
- if ((m)->type == (t))
-
-void data_free(struct data d);
-
-struct data data_grow_for(struct data d, int xlen);
-
-struct data data_copy_mem(const char *mem, int len);
-struct data data_copy_escape_string(const char *s, int len);
-struct data data_copy_file(FILE *f, size_t len);
-
-struct data data_append_data(struct data d, const void *p, int len);
-struct data data_insert_at_marker(struct data d, struct marker *m,
- const void *p, int len);
-struct data data_merge(struct data d1, struct data d2);
-struct data data_append_cell(struct data d, cell_t word);
-struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
-struct data data_append_addr(struct data d, uint64_t addr);
-struct data data_append_byte(struct data d, uint8_t byte);
-struct data data_append_zeroes(struct data d, int len);
-struct data data_append_align(struct data d, int align);
-
-struct data data_add_marker(struct data d, enum markertype type, char *ref);
-
-int data_is_one_string(struct data d);
-
-/* DT constraints */
-
-#define MAX_PROPNAME_LEN 31
-#define MAX_NODENAME_LEN 31
-
-/* Live trees */
-struct property {
- char *name;
- struct data val;
-
- struct property *next;
-
- char *label;
-};
-
-struct node {
- char *name;
- struct property *proplist;
- struct node *children;
-
- struct node *parent;
- struct node *next_sibling;
-
- char *fullpath;
- int basenamelen;
-
- cell_t phandle;
- int addr_cells, size_cells;
-
- char *label;
-};
-
-#define for_each_property(n, p) \
- for ((p) = (n)->proplist; (p); (p) = (p)->next)
-
-#define for_each_child(n, c) \
- for ((c) = (n)->children; (c); (c) = (c)->next_sibling)
-
-struct property *build_property(char *name, struct data val, char *label);
-struct property *chain_property(struct property *first, struct property *list);
-struct property *reverse_properties(struct property *first);
-
-struct node *build_node(struct property *proplist, struct node *children);
-struct node *name_node(struct node *node, char *name, char *label);
-struct node *chain_node(struct node *first, struct node *list);
-
-void add_property(struct node *node, struct property *prop);
-void add_child(struct node *parent, struct node *child);
-
-const char *get_unitname(struct node *node);
-struct property *get_property(struct node *node, const char *propname);
-cell_t propval_cell(struct property *prop);
-struct node *get_subnode(struct node *node, const char *nodename);
-struct node *get_node_by_path(struct node *tree, const char *path);
-struct node *get_node_by_label(struct node *tree, const char *label);
-struct node *get_node_by_phandle(struct node *tree, cell_t phandle);
-struct node *get_node_by_ref(struct node *tree, const char *ref);
-cell_t get_node_phandle(struct node *root, struct node *node);
-
-/* Boot info (tree plus memreserve information */
-
-struct reserve_info {
- struct fdt_reserve_entry re;
-
- struct reserve_info *next;
-
- char *label;
-};
-
-struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
-struct reserve_info *chain_reserve_entry(struct reserve_info *first,
- struct reserve_info *list);
-struct reserve_info *add_reserve_entry(struct reserve_info *list,
- struct reserve_info *new);
-
-
-struct boot_info {
- struct reserve_info *reservelist;
- struct node *dt; /* the device tree */
- uint32_t boot_cpuid_phys;
-};
-
-struct boot_info *build_boot_info(struct reserve_info *reservelist,
- struct node *tree, uint32_t boot_cpuid_phys);
-
-/* Checks */
-
-void process_checks(int force, struct boot_info *bi);
-
-/* Flattened trees */
-
-void dt_to_blob(FILE *f, struct boot_info *bi, int version);
-void dt_to_asm(FILE *f, struct boot_info *bi, int version);
-
-struct boot_info *dt_from_blob(const char *fname);
-
-/* Tree source */
-
-void dt_to_source(FILE *f, struct boot_info *bi);
-struct boot_info *dt_from_source(const char *f);
-
-/* FS trees */
-
-struct boot_info *dt_from_fs(const char *dirname);
-
-/* misc */
-
-char *join_path(const char *path, const char *name);
-
-#endif /* _DTC_H */
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-#define FTF_FULLPATH 0x1
-#define FTF_VARALIGN 0x2
-#define FTF_NAMEPROPS 0x4
-#define FTF_BOOTCPUID 0x8
-#define FTF_STRTABSIZE 0x10
-#define FTF_STRUCTSIZE 0x20
-#define FTF_NOPS 0x40
-
-static struct version_info {
- int version;
- int last_comp_version;
- int hdr_size;
- int flags;
-} version_table[] = {
- {1, 1, FDT_V1_SIZE,
- FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS},
- {2, 1, FDT_V2_SIZE,
- FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID},
- {3, 1, FDT_V3_SIZE,
- FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE},
- {16, 16, FDT_V3_SIZE,
- FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS},
- {17, 16, FDT_V17_SIZE,
- FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS},
-};
-
-struct emitter {
- void (*cell)(void *, cell_t);
- void (*string)(void *, char *, int);
- void (*align)(void *, int);
- void (*data)(void *, struct data);
- void (*beginnode)(void *, const char *);
- void (*endnode)(void *, const char *);
- void (*property)(void *, const char *);
-};
-
-static void bin_emit_cell(void *e, cell_t val)
-{
- struct data *dtbuf = e;
-
- *dtbuf = data_append_cell(*dtbuf, val);
-}
-
-static void bin_emit_string(void *e, char *str, int len)
-{
- struct data *dtbuf = e;
-
- if (len == 0)
- len = strlen(str);
-
- *dtbuf = data_append_data(*dtbuf, str, len);
- *dtbuf = data_append_byte(*dtbuf, '\0');
-}
-
-static void bin_emit_align(void *e, int a)
-{
- struct data *dtbuf = e;
-
- *dtbuf = data_append_align(*dtbuf, a);
-}
-
-static void bin_emit_data(void *e, struct data d)
-{
- struct data *dtbuf = e;
-
- *dtbuf = data_append_data(*dtbuf, d.val, d.len);
-}
-
-static void bin_emit_beginnode(void *e, const char *label)
-{
- bin_emit_cell(e, FDT_BEGIN_NODE);
-}
-
-static void bin_emit_endnode(void *e, const char *label)
-{
- bin_emit_cell(e, FDT_END_NODE);
-}
-
-static void bin_emit_property(void *e, const char *label)
-{
- bin_emit_cell(e, FDT_PROP);
-}
-
-static struct emitter bin_emitter = {
- .cell = bin_emit_cell,
- .string = bin_emit_string,
- .align = bin_emit_align,
- .data = bin_emit_data,
- .beginnode = bin_emit_beginnode,
- .endnode = bin_emit_endnode,
- .property = bin_emit_property,
-};
-
-static void emit_label(FILE *f, const char *prefix, const char *label)
-{
- fprintf(f, "\t.globl\t%s_%s\n", prefix, label);
- fprintf(f, "%s_%s:\n", prefix, label);
- fprintf(f, "_%s_%s:\n", prefix, label);
-}
-
-static void emit_offset_label(FILE *f, const char *label, int offset)
-{
- fprintf(f, "\t.globl\t%s\n", label);
- fprintf(f, "%s\t= . + %d\n", label, offset);
-}
-
-static void asm_emit_cell(void *e, cell_t val)
-{
- FILE *f = e;
-
- fprintf(f, "\t.long\t0x%x\n", val);
-}
-
-static void asm_emit_string(void *e, char *str, int len)
-{
- FILE *f = e;
- char c = 0;
-
- if (len != 0) {
- /* XXX: ewww */
- c = str[len];
- str[len] = '\0';
- }
-
- fprintf(f, "\t.string\t\"%s\"\n", str);
-
- if (len != 0) {
- str[len] = c;
- }
-}
-
-static void asm_emit_align(void *e, int a)
-{
- FILE *f = e;
-
- fprintf(f, "\t.balign\t%d\n", a);
-}
-
-static void asm_emit_data(void *e, struct data d)
-{
- FILE *f = e;
- int off = 0;
- struct marker *m = d.markers;
-
- for_each_marker_of_type(m, LABEL)
- emit_offset_label(f, m->ref, m->offset);
-
- while ((d.len - off) >= sizeof(uint32_t)) {
- fprintf(f, "\t.long\t0x%x\n",
- fdt32_to_cpu(*((uint32_t *)(d.val+off))));
- off += sizeof(uint32_t);
- }
-
- while ((d.len - off) >= 1) {
- fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
- off += 1;
- }
-
- assert(off == d.len);
-}
-
-static void asm_emit_beginnode(void *e, const char *label)
-{
- FILE *f = e;
-
- if (label) {
- fprintf(f, "\t.globl\t%s\n", label);
- fprintf(f, "%s:\n", label);
- }
- fprintf(f, "\t.long\tFDT_BEGIN_NODE\n");
-}
-
-static void asm_emit_endnode(void *e, const char *label)
-{
- FILE *f = e;
-
- fprintf(f, "\t.long\tFDT_END_NODE\n");
- if (label) {
- fprintf(f, "\t.globl\t%s_end\n", label);
- fprintf(f, "%s_end:\n", label);
- }
-}
-
-static void asm_emit_property(void *e, const char *label)
-{
- FILE *f = e;
-
- if (label) {
- fprintf(f, "\t.globl\t%s\n", label);
- fprintf(f, "%s:\n", label);
- }
- fprintf(f, "\t.long\tFDT_PROP\n");
-}
-
-static struct emitter asm_emitter = {
- .cell = asm_emit_cell,
- .string = asm_emit_string,
- .align = asm_emit_align,
- .data = asm_emit_data,
- .beginnode = asm_emit_beginnode,
- .endnode = asm_emit_endnode,
- .property = asm_emit_property,
-};
-
-static int stringtable_insert(struct data *d, const char *str)
-{
- int i;
-
- /* FIXME: do this more efficiently? */
-
- for (i = 0; i < d->len; i++) {
- if (streq(str, d->val + i))
- return i;
- }
-
- *d = data_append_data(*d, str, strlen(str)+1);
- return i;
-}
-
-static void flatten_tree(struct node *tree, struct emitter *emit,
- void *etarget, struct data *strbuf,
- struct version_info *vi)
-{
- struct property *prop;
- struct node *child;
- int seen_name_prop = 0;
-
- emit->beginnode(etarget, tree->label);
-
- if (vi->flags & FTF_FULLPATH)
- emit->string(etarget, tree->fullpath, 0);
- else
- emit->string(etarget, tree->name, 0);
-
- emit->align(etarget, sizeof(cell_t));
-
- for_each_property(tree, prop) {
- int nameoff;
-
- if (streq(prop->name, "name"))
- seen_name_prop = 1;
-
- nameoff = stringtable_insert(strbuf, prop->name);
-
- emit->property(etarget, prop->label);
- emit->cell(etarget, prop->val.len);
- emit->cell(etarget, nameoff);
-
- if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8))
- emit->align(etarget, 8);
-
- emit->data(etarget, prop->val);
- emit->align(etarget, sizeof(cell_t));
- }
-
- if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) {
- emit->property(etarget, NULL);
- emit->cell(etarget, tree->basenamelen+1);
- emit->cell(etarget, stringtable_insert(strbuf, "name"));
-
- if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8))
- emit->align(etarget, 8);
-
- emit->string(etarget, tree->name, tree->basenamelen);
- emit->align(etarget, sizeof(cell_t));
- }
-
- for_each_child(tree, child) {
- flatten_tree(child, emit, etarget, strbuf, vi);
- }
-
- emit->endnode(etarget, tree->label);
-}
-
-static struct data flatten_reserve_list(struct reserve_info *reservelist,
- struct version_info *vi)
-{
- struct reserve_info *re;
- struct data d = empty_data;
- static struct fdt_reserve_entry null_re = {0,0};
- int j;
-
- for (re = reservelist; re; re = re->next) {
- d = data_append_re(d, &re->re);
- }
- /*
- * Add additional reserved slots if the user asked for them.
- */
- for (j = 0; j < reservenum; j++) {
- d = data_append_re(d, &null_re);
- }
-
- return d;
-}
-
-static void make_fdt_header(struct fdt_header *fdt,
- struct version_info *vi,
- int reservesize, int dtsize, int strsize,
- int boot_cpuid_phys)
-{
- int reserve_off;
-
- reservesize += sizeof(struct fdt_reserve_entry);
-
- memset(fdt, 0xff, sizeof(*fdt));
-
- fdt->magic = cpu_to_fdt32(FDT_MAGIC);
- fdt->version = cpu_to_fdt32(vi->version);
- fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version);
-
- /* Reserve map should be doubleword aligned */
- reserve_off = ALIGN(vi->hdr_size, 8);
-
- fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off);
- fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize);
- fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize
- + dtsize);
- fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize);
-
- if (vi->flags & FTF_BOOTCPUID)
- fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys);
- if (vi->flags & FTF_STRTABSIZE)
- fdt->size_dt_strings = cpu_to_fdt32(strsize);
- if (vi->flags & FTF_STRUCTSIZE)
- fdt->size_dt_struct = cpu_to_fdt32(dtsize);
-}
-
-void dt_to_blob(FILE *f, struct boot_info *bi, int version)
-{
- struct version_info *vi = NULL;
- int i;
- struct data blob = empty_data;
- struct data reservebuf = empty_data;
- struct data dtbuf = empty_data;
- struct data strbuf = empty_data;
- struct fdt_header fdt;
- int padlen = 0;
-
- for (i = 0; i < ARRAY_SIZE(version_table); i++) {
- if (version_table[i].version == version)
- vi = &version_table[i];
- }
- if (!vi)
- die("Unknown device tree blob version %d\n", version);
-
- flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi);
- bin_emit_cell(&dtbuf, FDT_END);
-
- reservebuf = flatten_reserve_list(bi->reservelist, vi);
-
- /* Make header */
- make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
- bi->boot_cpuid_phys);
-
- /*
- * If the user asked for more space than is used, adjust the totalsize.
- */
- if (minsize > 0) {
- padlen = minsize - fdt32_to_cpu(fdt.totalsize);
- if ((padlen < 0) && (quiet < 1))
- fprintf(stderr,
- "Warning: blob size %d >= minimum size %d\n",
- fdt32_to_cpu(fdt.totalsize), minsize);
- }
-
- if (padsize > 0)
- padlen = padsize;
-
- if (padlen > 0) {
- int tsize = fdt32_to_cpu(fdt.totalsize);
- tsize += padlen;
- fdt.totalsize = cpu_to_fdt32(tsize);
- }
-
- /*
- * Assemble the blob: start with the header, add with alignment
- * the reserve buffer, add the reserve map terminating zeroes,
- * the device tree itself, and finally the strings.
- */
- blob = data_append_data(blob, &fdt, vi->hdr_size);
- blob = data_append_align(blob, 8);
- blob = data_merge(blob, reservebuf);
- blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
- blob = data_merge(blob, dtbuf);
- blob = data_merge(blob, strbuf);
-
- /*
- * If the user asked for more space than is used, pad out the blob.
- */
- if (padlen > 0)
- blob = data_append_zeroes(blob, padlen);
-
- fwrite(blob.val, blob.len, 1, f);
-
- if (ferror(f))
- die("Error writing device tree blob: %s\n", strerror(errno));
-
- /*
- * data_merge() frees the right-hand element so only the blob
- * remains to be freed.
- */
- data_free(blob);
-}
-
-static void dump_stringtable_asm(FILE *f, struct data strbuf)
-{
- const char *p;
- int len;
-
- p = strbuf.val;
-
- while (p < (strbuf.val + strbuf.len)) {
- len = strlen(p);
- fprintf(f, "\t.string \"%s\"\n", p);
- p += len+1;
- }
-}
-
-void dt_to_asm(FILE *f, struct boot_info *bi, int version)
-{
- struct version_info *vi = NULL;
- int i;
- struct data strbuf = empty_data;
- struct reserve_info *re;
- const char *symprefix = "dt";
-
- for (i = 0; i < ARRAY_SIZE(version_table); i++) {
- if (version_table[i].version == version)
- vi = &version_table[i];
- }
- if (!vi)
- die("Unknown device tree blob version %d\n", version);
-
- fprintf(f, "/* autogenerated by dtc, do not edit */\n\n");
- fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC);
- fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE);
- fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE);
- fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP);
- fprintf(f, "#define FDT_END 0x%x\n", FDT_END);
- fprintf(f, "\n");
-
- emit_label(f, symprefix, "blob_start");
- emit_label(f, symprefix, "header");
- fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n");
- fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n",
- symprefix, symprefix);
- fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version);
- fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n",
- vi->last_comp_version);
-
- if (vi->flags & FTF_BOOTCPUID)
- fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
- bi->boot_cpuid_phys);
-
- if (vi->flags & FTF_STRTABSIZE)
- fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
- symprefix, symprefix);
-
- if (vi->flags & FTF_STRUCTSIZE)
- fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n",
- symprefix, symprefix);
-
- /*
- * Reserve map entries.
- * Align the reserve map to a doubleword boundary.
- * Each entry is an (address, size) pair of u64 values.
- * Always supply a zero-sized temination entry.
- */
- asm_emit_align(f, 8);
- emit_label(f, symprefix, "reserve_map");
-
- fprintf(f, "/* Memory reserve map from source file */\n");
-
- /*
- * Use .long on high and low halfs of u64s to avoid .quad
- * as it appears .quad isn't available in some assemblers.
- */
- for (re = bi->reservelist; re; re = re->next) {
- if (re->label) {
- fprintf(f, "\t.globl\t%s\n", re->label);
- fprintf(f, "%s:\n", re->label);
- }
- fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
- (unsigned int)(re->re.address >> 32),
- (unsigned int)(re->re.address & 0xffffffff));
- fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
- (unsigned int)(re->re.size >> 32),
- (unsigned int)(re->re.size & 0xffffffff));
- }
- for (i = 0; i < reservenum; i++) {
- fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
- }
-
- fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
-
- emit_label(f, symprefix, "struct_start");
- flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi);
- fprintf(f, "\t.long\tFDT_END\n");
- emit_label(f, symprefix, "struct_end");
-
- emit_label(f, symprefix, "strings_start");
- dump_stringtable_asm(f, strbuf);
- emit_label(f, symprefix, "strings_end");
-
- emit_label(f, symprefix, "blob_end");
-
- /*
- * If the user asked for more space than is used, pad it out.
- */
- if (minsize > 0) {
- fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n",
- minsize, symprefix, symprefix);
- }
- if (padsize > 0) {
- fprintf(f, "\t.space\t%d, 0\n", padsize);
- }
- emit_label(f, symprefix, "blob_abs_end");
-
- data_free(strbuf);
-}
-
-struct inbuf {
- char *base, *limit, *ptr;
-};
-
-static void inbuf_init(struct inbuf *inb, void *base, void *limit)
-{
- inb->base = base;
- inb->limit = limit;
- inb->ptr = inb->base;
-}
-
-static void flat_read_chunk(struct inbuf *inb, void *p, int len)
-{
- if ((inb->ptr + len) > inb->limit)
- die("Premature end of data parsing flat device tree\n");
-
- memcpy(p, inb->ptr, len);
-
- inb->ptr += len;
-}
-
-static uint32_t flat_read_word(struct inbuf *inb)
-{
- uint32_t val;
-
- assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
-
- flat_read_chunk(inb, &val, sizeof(val));
-
- return fdt32_to_cpu(val);
-}
-
-static void flat_realign(struct inbuf *inb, int align)
-{
- int off = inb->ptr - inb->base;
-
- inb->ptr = inb->base + ALIGN(off, align);
- if (inb->ptr > inb->limit)
- die("Premature end of data parsing flat device tree\n");
-}
-
-static char *flat_read_string(struct inbuf *inb)
-{
- int len = 0;
- const char *p = inb->ptr;
- char *str;
-
- do {
- if (p >= inb->limit)
- die("Premature end of data parsing flat device tree\n");
- len++;
- } while ((*p++) != '\0');
-
- str = strdup(inb->ptr);
-
- inb->ptr += len;
-
- flat_realign(inb, sizeof(uint32_t));
-
- return str;
-}
-
-static struct data flat_read_data(struct inbuf *inb, int len)
-{
- struct data d = empty_data;
-
- if (len == 0)
- return empty_data;
-
- d = data_grow_for(d, len);
- d.len = len;
-
- flat_read_chunk(inb, d.val, len);
-
- flat_realign(inb, sizeof(uint32_t));
-
- return d;
-}
-
-static char *flat_read_stringtable(struct inbuf *inb, int offset)
-{
- const char *p;
-
- p = inb->base + offset;
- while (1) {
- if (p >= inb->limit || p < inb->base)
- die("String offset %d overruns string table\n",
- offset);
-
- if (*p == '\0')
- break;
-
- p++;
- }
-
- return strdup(inb->base + offset);
-}
-
-static struct property *flat_read_property(struct inbuf *dtbuf,
- struct inbuf *strbuf, int flags)
-{
- uint32_t proplen, stroff;
- char *name;
- struct data val;
-
- proplen = flat_read_word(dtbuf);
- stroff = flat_read_word(dtbuf);
-
- name = flat_read_stringtable(strbuf, stroff);
-
- if ((flags & FTF_VARALIGN) && (proplen >= 8))
- flat_realign(dtbuf, 8);
-
- val = flat_read_data(dtbuf, proplen);
-
- return build_property(name, val, NULL);
-}
-
-
-static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
-{
- struct reserve_info *reservelist = NULL;
- struct reserve_info *new;
- const char *p;
- struct fdt_reserve_entry re;
-
- /*
- * Each entry is a pair of u64 (addr, size) values for 4 cell_t's.
- * List terminates at an entry with size equal to zero.
- *
- * First pass, count entries.
- */
- p = inb->ptr;
- while (1) {
- flat_read_chunk(inb, &re, sizeof(re));
- re.address = fdt64_to_cpu(re.address);
- re.size = fdt64_to_cpu(re.size);
- if (re.size == 0)
- break;
-
- new = build_reserve_entry(re.address, re.size, NULL);
- reservelist = add_reserve_entry(reservelist, new);
- }
-
- return reservelist;
-}
-
-
-static char *nodename_from_path(const char *ppath, const char *cpath)
-{
- int plen;
-
- plen = strlen(ppath);
-
- if (!strneq(ppath, cpath, plen))
- die("Path \"%s\" is not valid as a child of \"%s\"\n",
- cpath, ppath);
-
- /* root node is a special case */
- if (!streq(ppath, "/"))
- plen++;
-
- return strdup(cpath + plen);
-}
-
-static struct node *unflatten_tree(struct inbuf *dtbuf,
- struct inbuf *strbuf,
- const char *parent_flatname, int flags)
-{
- struct node *node;
- char *flatname;
- uint32_t val;
-
- node = build_node(NULL, NULL);
-
- flatname = flat_read_string(dtbuf);
-
- if (flags & FTF_FULLPATH)
- node->name = nodename_from_path(parent_flatname, flatname);
- else
- node->name = flatname;
-
- do {
- struct property *prop;
- struct node *child;
-
- val = flat_read_word(dtbuf);
- switch (val) {
- case FDT_PROP:
- if (node->children)
- fprintf(stderr, "Warning: Flat tree input has "
- "subnodes preceding a property.\n");
- prop = flat_read_property(dtbuf, strbuf, flags);
- add_property(node, prop);
- break;
-
- case FDT_BEGIN_NODE:
- child = unflatten_tree(dtbuf,strbuf, flatname, flags);
- add_child(node, child);
- break;
-
- case FDT_END_NODE:
- break;
-
- case FDT_END:
- die("Premature FDT_END in device tree blob\n");
- break;
-
- case FDT_NOP:
- if (!(flags & FTF_NOPS))
- fprintf(stderr, "Warning: NOP tag found in flat tree"
- " version <16\n");
-
- /* Ignore */
- break;
-
- default:
- die("Invalid opcode word %08x in device tree blob\n",
- val);
- }
- } while (val != FDT_END_NODE);
-
- return node;
-}
-
-
-struct boot_info *dt_from_blob(const char *fname)
-{
- struct dtc_file *dtcf;
- uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
- uint32_t off_dt, off_str, off_mem_rsvmap;
- int rc;
- char *blob;
- struct fdt_header *fdt;
- char *p;
- struct inbuf dtbuf, strbuf;
- struct inbuf memresvbuf;
- int sizeleft;
- struct reserve_info *reservelist;
- struct node *tree;
- uint32_t val;
- int flags = 0;
-
- dtcf = dtc_open_file(fname, NULL);
-
- rc = fread(&magic, sizeof(magic), 1, dtcf->file);
- if (ferror(dtcf->file))
- die("Error reading DT blob magic number: %s\n",
- strerror(errno));
- if (rc < 1) {
- if (feof(dtcf->file))
- die("EOF reading DT blob magic number\n");
- else
- die("Mysterious short read reading magic number\n");
- }
-
- magic = fdt32_to_cpu(magic);
- if (magic != FDT_MAGIC)
- die("Blob has incorrect magic number\n");
-
- rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file);
- if (ferror(dtcf->file))
- die("Error reading DT blob size: %s\n", strerror(errno));
- if (rc < 1) {
- if (feof(dtcf->file))
- die("EOF reading DT blob size\n");
- else
- die("Mysterious short read reading blob size\n");
- }
-
- totalsize = fdt32_to_cpu(totalsize);
- if (totalsize < FDT_V1_SIZE)
- die("DT blob size (%d) is too small\n", totalsize);
-
- blob = xmalloc(totalsize);
-
- fdt = (struct fdt_header *)blob;
- fdt->magic = cpu_to_fdt32(magic);
- fdt->totalsize = cpu_to_fdt32(totalsize);
-
- sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
- p = blob + sizeof(magic) + sizeof(totalsize);
-
- while (sizeleft) {
- if (feof(dtcf->file))
- die("EOF before reading %d bytes of DT blob\n",
- totalsize);
-
- rc = fread(p, 1, sizeleft, dtcf->file);
- if (ferror(dtcf->file))
- die("Error reading DT blob: %s\n",
- strerror(errno));
-
- sizeleft -= rc;
- p += rc;
- }
-
- off_dt = fdt32_to_cpu(fdt->off_dt_struct);
- off_str = fdt32_to_cpu(fdt->off_dt_strings);
- off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap);
- version = fdt32_to_cpu(fdt->version);
- boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys);
-
- if (off_mem_rsvmap >= totalsize)
- die("Mem Reserve structure offset exceeds total size\n");
-
- if (off_dt >= totalsize)
- die("DT structure offset exceeds total size\n");
-
- if (off_str > totalsize)
- die("String table offset exceeds total size\n");
-
- if (version >= 3) {
- uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings);
- if (off_str+size_str > totalsize)
- die("String table extends past total size\n");
- inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
- } else {
- inbuf_init(&strbuf, blob + off_str, blob + totalsize);
- }
-
- if (version >= 17) {
- size_dt = fdt32_to_cpu(fdt->size_dt_struct);
- if (off_dt+size_dt > totalsize)
- die("Structure block extends past total size\n");
- }
-
- if (version < 16) {
- flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN;
- } else {
- flags |= FTF_NOPS;
- }
-
- inbuf_init(&memresvbuf,
- blob + off_mem_rsvmap, blob + totalsize);
- inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
-
- reservelist = flat_read_mem_reserve(&memresvbuf);
-
- val = flat_read_word(&dtbuf);
-
- if (val != FDT_BEGIN_NODE)
- die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val);
-
- tree = unflatten_tree(&dtbuf, &strbuf, "", flags);
-
- val = flat_read_word(&dtbuf);
- if (val != FDT_END)
- die("Device tree blob doesn't end with FDT_END\n");
-
- free(blob);
-
- dtc_close_file(dtcf);
-
- return build_boot_info(reservelist, tree, boot_cpuid_phys);
-}
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-#include <dirent.h>
-#include <sys/stat.h>
-
-static struct node *read_fstree(const char *dirname)
-{
- DIR *d;
- struct dirent *de;
- struct stat st;
- struct node *tree;
-
- d = opendir(dirname);
- if (!d)
- die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
-
- tree = build_node(NULL, NULL);
-
- while ((de = readdir(d)) != NULL) {
- char *tmpnam;
-
- if (streq(de->d_name, ".")
- || streq(de->d_name, ".."))
- continue;
-
- tmpnam = join_path(dirname, de->d_name);
-
- if (lstat(tmpnam, &st) < 0)
- die("stat(%s): %s\n", tmpnam, strerror(errno));
-
- if (S_ISREG(st.st_mode)) {
- struct property *prop;
- FILE *pfile;
-
- pfile = fopen(tmpnam, "r");
- if (! pfile) {
- fprintf(stderr,
- "WARNING: Cannot open %s: %s\n",
- tmpnam, strerror(errno));
- } else {
- prop = build_property(strdup(de->d_name),
- data_copy_file(pfile,
- st.st_size),
- NULL);
- add_property(tree, prop);
- fclose(pfile);
- }
- } else if (S_ISDIR(st.st_mode)) {
- struct node *newchild;
-
- newchild = read_fstree(tmpnam);
- newchild = name_node(newchild, strdup(de->d_name),
- NULL);
- add_child(tree, newchild);
- }
-
- free(tmpnam);
- }
-
- return tree;
-}
-
-struct boot_info *dt_from_fs(const char *dirname)
-{
- struct node *tree;
-
- tree = read_fstree(dirname);
- tree = name_node(tree, "", NULL);
-
- return build_boot_info(NULL, tree, 0);
-}
-
+++ /dev/null
-#ifndef _LIBFDT_ENV_H
-#define _LIBFDT_ENV_H
-
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-
-#define _B(n) ((unsigned long long)((uint8_t *)&x)[n])
-static inline uint32_t fdt32_to_cpu(uint32_t x)
-{
- return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
-}
-#define cpu_to_fdt32(x) fdt32_to_cpu(x)
-
-static inline uint64_t fdt64_to_cpu(uint64_t x)
-{
- return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
- | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
-}
-#define cpu_to_fdt64(x) fdt64_to_cpu(x)
-#undef _B
-
-#endif /* _LIBFDT_ENV_H */
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-
-/*
- * Tree building functions
- */
-
-struct property *build_property(char *name, struct data val, char *label)
-{
- struct property *new = xmalloc(sizeof(*new));
-
- new->name = name;
- new->val = val;
-
- new->next = NULL;
-
- new->label = label;
-
- return new;
-}
-
-struct property *chain_property(struct property *first, struct property *list)
-{
- assert(first->next == NULL);
-
- first->next = list;
- return first;
-}
-
-struct property *reverse_properties(struct property *first)
-{
- struct property *p = first;
- struct property *head = NULL;
- struct property *next;
-
- while (p) {
- next = p->next;
- p->next = head;
- head = p;
- p = next;
- }
- return head;
-}
-
-struct node *build_node(struct property *proplist, struct node *children)
-{
- struct node *new = xmalloc(sizeof(*new));
- struct node *child;
-
- memset(new, 0, sizeof(*new));
-
- new->proplist = reverse_properties(proplist);
- new->children = children;
-
- for_each_child(new, child) {
- child->parent = new;
- }
-
- return new;
-}
-
-struct node *name_node(struct node *node, char *name, char * label)
-{
- assert(node->name == NULL);
-
- node->name = name;
-
- node->label = label;
-
- return node;
-}
-
-struct node *chain_node(struct node *first, struct node *list)
-{
- assert(first->next_sibling == NULL);
-
- first->next_sibling = list;
- return first;
-}
-
-void add_property(struct node *node, struct property *prop)
-{
- struct property **p;
-
- prop->next = NULL;
-
- p = &node->proplist;
- while (*p)
- p = &((*p)->next);
-
- *p = prop;
-}
-
-void add_child(struct node *parent, struct node *child)
-{
- struct node **p;
-
- child->next_sibling = NULL;
- child->parent = parent;
-
- p = &parent->children;
- while (*p)
- p = &((*p)->next_sibling);
-
- *p = child;
-}
-
-struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
- char *label)
-{
- struct reserve_info *new = xmalloc(sizeof(*new));
-
- new->re.address = address;
- new->re.size = size;
-
- new->next = NULL;
-
- new->label = label;
-
- return new;
-}
-
-struct reserve_info *chain_reserve_entry(struct reserve_info *first,
- struct reserve_info *list)
-{
- assert(first->next == NULL);
-
- first->next = list;
- return first;
-}
-
-struct reserve_info *add_reserve_entry(struct reserve_info *list,
- struct reserve_info *new)
-{
- struct reserve_info *last;
-
- new->next = NULL;
-
- if (! list)
- return new;
-
- for (last = list; last->next; last = last->next)
- ;
-
- last->next = new;
-
- return list;
-}
-
-struct boot_info *build_boot_info(struct reserve_info *reservelist,
- struct node *tree, uint32_t boot_cpuid_phys)
-{
- struct boot_info *bi;
-
- bi = xmalloc(sizeof(*bi));
- bi->reservelist = reservelist;
- bi->dt = tree;
- bi->boot_cpuid_phys = boot_cpuid_phys;
-
- return bi;
-}
-
-/*
- * Tree accessor functions
- */
-
-const char *get_unitname(struct node *node)
-{
- if (node->name[node->basenamelen] == '\0')
- return "";
- else
- return node->name + node->basenamelen + 1;
-}
-
-struct property *get_property(struct node *node, const char *propname)
-{
- struct property *prop;
-
- for_each_property(node, prop)
- if (streq(prop->name, propname))
- return prop;
-
- return NULL;
-}
-
-cell_t propval_cell(struct property *prop)
-{
- assert(prop->val.len == sizeof(cell_t));
- return fdt32_to_cpu(*((cell_t *)prop->val.val));
-}
-
-struct node *get_subnode(struct node *node, const char *nodename)
-{
- struct node *child;
-
- for_each_child(node, child)
- if (streq(child->name, nodename))
- return child;
-
- return NULL;
-}
-
-struct node *get_node_by_path(struct node *tree, const char *path)
-{
- const char *p;
- struct node *child;
-
- if (!path || ! (*path))
- return tree;
-
- while (path[0] == '/')
- path++;
-
- p = strchr(path, '/');
-
- for_each_child(tree, child) {
- if (p && strneq(path, child->name, p-path))
- return get_node_by_path(child, p+1);
- else if (!p && streq(path, child->name))
- return child;
- }
-
- return NULL;
-}
-
-struct node *get_node_by_label(struct node *tree, const char *label)
-{
- struct node *child, *node;
-
- assert(label && (strlen(label) > 0));
-
- if (tree->label && streq(tree->label, label))
- return tree;
-
- for_each_child(tree, child) {
- node = get_node_by_label(child, label);
- if (node)
- return node;
- }
-
- return NULL;
-}
-
-struct node *get_node_by_phandle(struct node *tree, cell_t phandle)
-{
- struct node *child, *node;
-
- assert((phandle != 0) && (phandle != -1));
-
- if (tree->phandle == phandle)
- return tree;
-
- for_each_child(tree, child) {
- node = get_node_by_phandle(child, phandle);
- if (node)
- return node;
- }
-
- return NULL;
-}
-
-struct node *get_node_by_ref(struct node *tree, const char *ref)
-{
- if (ref[0] == '/')
- return get_node_by_path(tree, ref);
- else
- return get_node_by_label(tree, ref);
-}
-
-cell_t get_node_phandle(struct node *root, struct node *node)
-{
- static cell_t phandle = 1; /* FIXME: ick, static local */
-
- if ((node->phandle != 0) && (node->phandle != -1))
- return node->phandle;
-
- assert(! get_property(node, "linux,phandle"));
-
- while (get_node_by_phandle(root, phandle))
- phandle++;
-
- node->phandle = phandle;
- add_property(node,
- build_property("linux,phandle",
- data_append_cell(empty_data, phandle),
- NULL));
-
- return node->phandle;
-}
+++ /dev/null
-/*
- * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-/*
- * Like yylineno, this is the current open file pos.
- */
-
-struct dtc_file *srcpos_file;
-
-static int dtc_open_one(struct dtc_file *file,
- const char *search,
- const char *fname)
-{
- char *fullname;
-
- if (search) {
- fullname = xmalloc(strlen(search) + strlen(fname) + 2);
-
- strcpy(fullname, search);
- strcat(fullname, "/");
- strcat(fullname, fname);
- } else {
- fullname = strdup(fname);
- }
-
- file->file = fopen(fullname, "r");
- if (!file->file) {
- free(fullname);
- return 0;
- }
-
- file->name = fullname;
- return 1;
-}
-
-
-struct dtc_file *dtc_open_file(const char *fname,
- const struct search_path *search)
-{
- static const struct search_path default_search = { NULL, NULL, NULL };
-
- struct dtc_file *file;
- const char *slash;
-
- file = xmalloc(sizeof(struct dtc_file));
-
- slash = strrchr(fname, '/');
- if (slash) {
- char *dir = xmalloc(slash - fname + 1);
-
- memcpy(dir, fname, slash - fname);
- dir[slash - fname] = 0;
- file->dir = dir;
- } else {
- file->dir = NULL;
- }
-
- if (streq(fname, "-")) {
- file->name = "stdin";
- file->file = stdin;
- return file;
- }
-
- if (fname[0] == '/') {
- file->file = fopen(fname, "r");
- if (!file->file)
- goto fail;
-
- file->name = strdup(fname);
- return file;
- }
-
- if (!search)
- search = &default_search;
-
- while (search) {
- if (dtc_open_one(file, search->dir, fname))
- return file;
-
- if (errno != ENOENT)
- goto fail;
-
- search = search->next;
- }
-
-fail:
- die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
-}
-
-void dtc_close_file(struct dtc_file *file)
-{
- if (fclose(file->file))
- die("Error closing \"%s\": %s\n", file->name, strerror(errno));
-
- free(file->dir);
- free(file);
-}
+++ /dev/null
-/*
- * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-/*
- * Augment the standard YYLTYPE with a filenum index into an
- * array of all opened filenames.
- */
-
-#include <stdio.h>
-
-struct dtc_file {
- char *dir;
- const char *name;
- FILE *file;
-};
-
-#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
-typedef struct YYLTYPE {
- int first_line;
- int first_column;
- int last_line;
- int last_column;
- struct dtc_file *file;
-} YYLTYPE;
-
-#define YYLTYPE_IS_DECLARED 1
-#define YYLTYPE_IS_TRIVIAL 1
-#endif
-
-/* Cater to old parser templates. */
-#ifndef YYID
-#define YYID(n) (n)
-#endif
-
-#define YYLLOC_DEFAULT(Current, Rhs, N) \
- do \
- if (YYID (N)) \
- { \
- (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
- (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
- (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
- (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
- (Current).file = YYRHSLOC (Rhs, N).file; \
- } \
- else \
- { \
- (Current).first_line = (Current).last_line = \
- YYRHSLOC (Rhs, 0).last_line; \
- (Current).first_column = (Current).last_column = \
- YYRHSLOC (Rhs, 0).last_column; \
- (Current).file = YYRHSLOC (Rhs, 0).file; \
- } \
- while (YYID (0))
-
-
-
-extern void yyerror(char const *);
-extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
-
-extern struct dtc_file *srcpos_file;
-
-struct search_path {
- const char *dir; /* NULL for current directory */
- struct search_path *prev, *next;
-};
-
-extern struct dtc_file *dtc_open_file(const char *fname,
- const struct search_path *search);
-extern void dtc_close_file(struct dtc_file *file);
+++ /dev/null
-/*
- * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include "dtc.h"
-#include "srcpos.h"
-
-extern FILE *yyin;
-extern int yyparse(void);
-
-struct boot_info *the_boot_info;
-int treesource_error;
-
-struct boot_info *dt_from_source(const char *fname)
-{
- the_boot_info = NULL;
- treesource_error = 0;
-
- srcpos_file = dtc_open_file(fname, NULL);
- yyin = srcpos_file->file;
-
- if (yyparse() != 0)
- die("Unable to parse input tree\n");
-
- if (treesource_error)
- die("Syntax error parsing input tree\n");
-
- return the_boot_info;
-}
-
-static void write_prefix(FILE *f, int level)
-{
- int i;
-
- for (i = 0; i < level; i++)
- fputc('\t', f);
-}
-
-int isstring(char c)
-{
- return (isprint(c)
- || (c == '\0')
- || strchr("\a\b\t\n\v\f\r", c));
-}
-
-static void write_propval_string(FILE *f, struct data val)
-{
- const char *str = val.val;
- int i;
- int newchunk = 1;
- struct marker *m = val.markers;
-
- assert(str[val.len-1] == '\0');
-
- for (i = 0; i < (val.len-1); i++) {
- char c = str[i];
-
- if (newchunk) {
- while (m && (m->offset <= i)) {
- if (m->type == LABEL) {
- assert(m->offset == i);
- fprintf(f, "%s: ", m->ref);
- }
- m = m->next;
- }
- fprintf(f, "\"");
- newchunk = 0;
- }
-
- switch (c) {
- case '\a':
- fprintf(f, "\\a");
- break;
- case '\b':
- fprintf(f, "\\b");
- break;
- case '\t':
- fprintf(f, "\\t");
- break;
- case '\n':
- fprintf(f, "\\n");
- break;
- case '\v':
- fprintf(f, "\\v");
- break;
- case '\f':
- fprintf(f, "\\f");
- break;
- case '\r':
- fprintf(f, "\\r");
- break;
- case '\\':
- fprintf(f, "\\\\");
- break;
- case '\"':
- fprintf(f, "\\\"");
- break;
- case '\0':
- fprintf(f, "\", ");
- newchunk = 1;
- break;
- default:
- if (isprint(c))
- fprintf(f, "%c", c);
- else
- fprintf(f, "\\x%02hhx", c);
- }
- }
- fprintf(f, "\"");
-
- /* Wrap up any labels at the end of the value */
- for_each_marker_of_type(m, LABEL) {
- assert (m->offset == val.len);
- fprintf(f, " %s:", m->ref);
- }
-}
-
-static void write_propval_cells(FILE *f, struct data val)
-{
- void *propend = val.val + val.len;
- cell_t *cp = (cell_t *)val.val;
- struct marker *m = val.markers;
-
- fprintf(f, "<");
- for (;;) {
- while (m && (m->offset <= ((char *)cp - val.val))) {
- if (m->type == LABEL) {
- assert(m->offset == ((char *)cp - val.val));
- fprintf(f, "%s: ", m->ref);
- }
- m = m->next;
- }
-
- fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
- if ((void *)cp >= propend)
- break;
- fprintf(f, " ");
- }
-
- /* Wrap up any labels at the end of the value */
- for_each_marker_of_type(m, LABEL) {
- assert (m->offset == val.len);
- fprintf(f, " %s:", m->ref);
- }
- fprintf(f, ">");
-}
-
-static void write_propval_bytes(FILE *f, struct data val)
-{
- void *propend = val.val + val.len;
- const char *bp = val.val;
- struct marker *m = val.markers;
-
- fprintf(f, "[");
- for (;;) {
- while (m && (m->offset == (bp-val.val))) {
- if (m->type == LABEL)
- fprintf(f, "%s: ", m->ref);
- m = m->next;
- }
-
- fprintf(f, "%02hhx", *bp++);
- if ((const void *)bp >= propend)
- break;
- fprintf(f, " ");
- }
-
- /* Wrap up any labels at the end of the value */
- for_each_marker_of_type(m, LABEL) {
- assert (m->offset == val.len);
- fprintf(f, " %s:", m->ref);
- }
- fprintf(f, "]");
-}
-
-static void write_propval(FILE *f, struct property *prop)
-{
- int len = prop->val.len;
- const char *p = prop->val.val;
- struct marker *m = prop->val.markers;
- int nnotstring = 0, nnul = 0;
- int nnotstringlbl = 0, nnotcelllbl = 0;
- int i;
-
- if (len == 0) {
- fprintf(f, ";\n");
- return;
- }
-
- for (i = 0; i < len; i++) {
- if (! isstring(p[i]))
- nnotstring++;
- if (p[i] == '\0')
- nnul++;
- }
-
- for_each_marker_of_type(m, LABEL) {
- if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0'))
- nnotstringlbl++;
- if ((m->offset % sizeof(cell_t)) != 0)
- nnotcelllbl++;
- }
-
- fprintf(f, " = ");
- if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul))
- && (nnotstringlbl == 0)) {
- write_propval_string(f, prop->val);
- } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) {
- write_propval_cells(f, prop->val);
- } else {
- write_propval_bytes(f, prop->val);
- }
-
- fprintf(f, ";\n");
-}
-
-static void write_tree_source_node(FILE *f, struct node *tree, int level)
-{
- struct property *prop;
- struct node *child;
-
- write_prefix(f, level);
- if (tree->label)
- fprintf(f, "%s: ", tree->label);
- if (tree->name && (*tree->name))
- fprintf(f, "%s {\n", tree->name);
- else
- fprintf(f, "/ {\n");
-
- for_each_property(tree, prop) {
- write_prefix(f, level+1);
- if (prop->label)
- fprintf(f, "%s: ", prop->label);
- fprintf(f, "%s", prop->name);
- write_propval(f, prop);
- }
- for_each_child(tree, child) {
- fprintf(f, "\n");
- write_tree_source_node(f, child, level+1);
- }
- write_prefix(f, level);
- fprintf(f, "};\n");
-}
-
-
-void dt_to_source(FILE *f, struct boot_info *bi)
-{
- struct reserve_info *re;
-
- fprintf(f, "/dts-v1/;\n\n");
-
- for (re = bi->reservelist; re; re = re->next) {
- if (re->label)
- fprintf(f, "%s: ", re->label);
- fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n",
- (unsigned long long)re->re.address,
- (unsigned long long)re->re.size);
- }
-
- write_tree_source_node(f, bi->dt, 0);
-}
-
+++ /dev/null
-#define DTC_VERSION "DTC 1.2.0"
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
+ device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xfe000000 0x02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <1>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@200000 {
+ label = "rootfs";
+ reg = <0x00200000 0x01d00000>;
+ };
+ partition@1f00000 {
+ label = "u-boot";
+ reg = <0x01f00000 0x00060000>;
+ };
+ partition@1f60000 {
+ label = "u-boot-env";
+ reg = <0x01f60000 0x00020000>;
+ };
+ partition@1f80000 {
+ label = "dtb";
+ reg = <0x01f80000 0x00080000>;
+ };
+ };
+ };
+
};
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
+++ /dev/null
-# Makefile.libfdt
-#
-# This is not a complete Makefile of itself. Instead, it is designed to
-# be easily embeddable into other systems of Makefiles.
-#
-LIBFDT_INCLUDES = fdt.h libfdt.h
-LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-int fdt_check_header(const void *fdt)
-{
- if (fdt_magic(fdt) == FDT_MAGIC) {
- /* Complete tree */
- if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
- return -FDT_ERR_BADVERSION;
- if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
- return -FDT_ERR_BADVERSION;
- } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
- /* Unfinished sequential-write blob */
- if (fdt_size_dt_struct(fdt) == 0)
- return -FDT_ERR_BADSTATE;
- } else {
- return -FDT_ERR_BADMAGIC;
- }
-
- return 0;
-}
-
-const void *fdt_offset_ptr(const void *fdt, int offset, int len)
-{
- const char *p;
-
- if (fdt_version(fdt) >= 0x11)
- if (((offset + len) < offset)
- || ((offset + len) > fdt_size_dt_struct(fdt)))
- return NULL;
-
- p = _fdt_offset_ptr(fdt, offset);
-
- if (p + len < p)
- return NULL;
- return p;
-}
-
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
-{
- const uint32_t *tagp, *lenp;
- uint32_t tag;
- const char *p;
-
- if (offset % FDT_TAGSIZE)
- return -1;
-
- tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
- if (! tagp)
- return FDT_END; /* premature end */
- tag = fdt32_to_cpu(*tagp);
- offset += FDT_TAGSIZE;
-
- switch (tag) {
- case FDT_BEGIN_NODE:
- /* skip name */
- do {
- p = fdt_offset_ptr(fdt, offset++, 1);
- } while (p && (*p != '\0'));
- if (! p)
- return FDT_END;
- break;
- case FDT_PROP:
- lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
- if (! lenp)
- return FDT_END;
- /* skip name offset, length and value */
- offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
- break;
- }
-
- if (nextoffset)
- *nextoffset = FDT_TAGALIGN(offset);
-
- return tag;
-}
-
-int _fdt_check_node_offset(const void *fdt, int offset)
-{
- if ((offset < 0) || (offset % FDT_TAGSIZE)
- || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
- return -FDT_ERR_BADOFFSET;
-
- return offset;
-}
-
-int fdt_next_node(const void *fdt, int offset, int *depth)
-{
- int nextoffset = 0;
- uint32_t tag;
-
- if (offset >= 0)
- if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
- return nextoffset;
-
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
-
- switch (tag) {
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- case FDT_BEGIN_NODE:
- if (depth)
- (*depth)++;
- break;
-
- case FDT_END_NODE:
- if (depth)
- (*depth)--;
- break;
-
- case FDT_END:
- return -FDT_ERR_NOTFOUND;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (tag != FDT_BEGIN_NODE);
-
- return offset;
-}
-
-const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
-{
- int len = strlen(s) + 1;
- const char *last = strtab + tabsize - len;
- const char *p;
-
- for (p = strtab; p <= last; p++)
- if (memcmp(p, s, len) == 0)
- return p;
- return NULL;
-}
-
-int fdt_move(const void *fdt, void *buf, int bufsize)
-{
- FDT_CHECK_HEADER(fdt);
-
- if (fdt_totalsize(fdt) > bufsize)
- return -FDT_ERR_NOSPACE;
-
- memmove(buf, fdt, fdt_totalsize(fdt));
- return 0;
-}
+++ /dev/null
-#ifndef _FDT_H
-#define _FDT_H
-
-#ifndef __ASSEMBLY__
-
-struct fdt_header {
- uint32_t magic; /* magic word FDT_MAGIC */
- uint32_t totalsize; /* total size of DT block */
- uint32_t off_dt_struct; /* offset to structure */
- uint32_t off_dt_strings; /* offset to strings */
- uint32_t off_mem_rsvmap; /* offset to memory reserve map */
- uint32_t version; /* format version */
- uint32_t last_comp_version; /* last compatible version */
-
- /* version 2 fields below */
- uint32_t boot_cpuid_phys; /* Which physical CPU id we're
- booting on */
- /* version 3 fields below */
- uint32_t size_dt_strings; /* size of the strings block */
-
- /* version 17 fields below */
- uint32_t size_dt_struct; /* size of the structure block */
-};
-
-struct fdt_reserve_entry {
- uint64_t address;
- uint64_t size;
-};
-
-struct fdt_node_header {
- uint32_t tag;
- char name[0];
-};
-
-struct fdt_property {
- uint32_t tag;
- uint32_t len;
- uint32_t nameoff;
- char data[0];
-};
-
-#endif /* !__ASSEMBLY */
-
-#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
-#define FDT_TAGSIZE sizeof(uint32_t)
-
-#define FDT_BEGIN_NODE 0x1 /* Start node: full name */
-#define FDT_END_NODE 0x2 /* End node */
-#define FDT_PROP 0x3 /* Property: name off,
- size, content */
-#define FDT_NOP 0x4 /* nop */
-#define FDT_END 0x9
-
-#define FDT_V1_SIZE (7*sizeof(uint32_t))
-#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t))
-#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t))
-#define FDT_V16_SIZE FDT_V3_SIZE
-#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t))
-
-#endif /* _FDT_H */
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_nodename_eq(const void *fdt, int offset,
- const char *s, int len)
-{
- const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
-
- if (! p)
- /* short match */
- return 0;
-
- if (memcmp(p, s, len) != 0)
- return 0;
-
- if (p[len] == '\0')
- return 1;
- else if (!memchr(s, '@', len) && (p[len] == '@'))
- return 1;
- else
- return 0;
-}
-
-const char *fdt_string(const void *fdt, int stroffset)
-{
- return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
-}
-
-int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
-{
- FDT_CHECK_HEADER(fdt);
- *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
- *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
- return 0;
-}
-
-int fdt_num_mem_rsv(const void *fdt)
-{
- int i = 0;
-
- while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0)
- i++;
- return i;
-}
-
-int fdt_subnode_offset_namelen(const void *fdt, int offset,
- const char *name, int namelen)
-{
- int depth;
-
- FDT_CHECK_HEADER(fdt);
-
- for (depth = 0, offset = fdt_next_node(fdt, offset, &depth);
- (offset >= 0) && (depth > 0);
- offset = fdt_next_node(fdt, offset, &depth)) {
- if (depth < 0)
- return -FDT_ERR_NOTFOUND;
- else if ((depth == 1)
- && _fdt_nodename_eq(fdt, offset, name, namelen))
- return offset;
- }
-
- if (offset < 0)
- return offset; /* error */
- else
- return -FDT_ERR_NOTFOUND;
-}
-
-int fdt_subnode_offset(const void *fdt, int parentoffset,
- const char *name)
-{
- return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
-}
-
-int fdt_path_offset(const void *fdt, const char *path)
-{
- const char *end = path + strlen(path);
- const char *p = path;
- int offset = 0;
-
- FDT_CHECK_HEADER(fdt);
-
- if (*path != '/')
- return -FDT_ERR_BADPATH;
-
- while (*p) {
- const char *q;
-
- while (*p == '/')
- p++;
- if (! *p)
- return offset;
- q = strchr(p, '/');
- if (! q)
- q = end;
-
- offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
- if (offset < 0)
- return offset;
-
- p = q;
- }
-
- return offset;
-}
-
-const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
-{
- const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset);
- int err;
-
- if (((err = fdt_check_header(fdt)) != 0)
- || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
- goto fail;
-
- if (len)
- *len = strlen(nh->name);
-
- return nh->name;
-
- fail:
- if (len)
- *len = err;
- return NULL;
-}
-
-const struct fdt_property *fdt_get_property(const void *fdt,
- int nodeoffset,
- const char *name, int *lenp)
-{
- uint32_t tag;
- const struct fdt_property *prop;
- int namestroff;
- int offset, nextoffset;
- int err;
-
- if (((err = fdt_check_header(fdt)) != 0)
- || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
- goto fail;
-
- nextoffset = err;
- do {
- offset = nextoffset;
-
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- switch (tag) {
- case FDT_END:
- err = -FDT_ERR_TRUNCATED;
- goto fail;
-
- case FDT_BEGIN_NODE:
- case FDT_END_NODE:
- case FDT_NOP:
- break;
-
- case FDT_PROP:
- err = -FDT_ERR_BADSTRUCTURE;
- prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
- if (! prop)
- goto fail;
- namestroff = fdt32_to_cpu(prop->nameoff);
- if (strcmp(fdt_string(fdt, namestroff), name) == 0) {
- /* Found it! */
- int len = fdt32_to_cpu(prop->len);
- prop = fdt_offset_ptr(fdt, offset,
- sizeof(*prop)+len);
- if (! prop)
- goto fail;
-
- if (lenp)
- *lenp = len;
-
- return prop;
- }
- break;
-
- default:
- err = -FDT_ERR_BADSTRUCTURE;
- goto fail;
- }
- } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
-
- err = -FDT_ERR_NOTFOUND;
- fail:
- if (lenp)
- *lenp = err;
- return NULL;
-}
-
-const void *fdt_getprop(const void *fdt, int nodeoffset,
- const char *name, int *lenp)
-{
- const struct fdt_property *prop;
-
- prop = fdt_get_property(fdt, nodeoffset, name, lenp);
- if (! prop)
- return NULL;
-
- return prop->data;
-}
-
-uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
-{
- const uint32_t *php;
- int len;
-
- php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
- if (!php || (len != sizeof(*php)))
- return 0;
-
- return fdt32_to_cpu(*php);
-}
-
-int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
-{
- int pdepth = 0, p = 0;
- int offset, depth, namelen;
- const char *name;
-
- FDT_CHECK_HEADER(fdt);
-
- if (buflen < 2)
- return -FDT_ERR_NOSPACE;
-
- for (offset = 0, depth = 0;
- (offset >= 0) && (offset <= nodeoffset);
- offset = fdt_next_node(fdt, offset, &depth)) {
- if (pdepth < depth)
- continue; /* overflowed buffer */
-
- while (pdepth > depth) {
- do {
- p--;
- } while (buf[p-1] != '/');
- pdepth--;
- }
-
- name = fdt_get_name(fdt, offset, &namelen);
- if (!name)
- return namelen;
- if ((p + namelen + 1) <= buflen) {
- memcpy(buf + p, name, namelen);
- p += namelen;
- buf[p++] = '/';
- pdepth++;
- }
-
- if (offset == nodeoffset) {
- if (pdepth < (depth + 1))
- return -FDT_ERR_NOSPACE;
-
- if (p > 1) /* special case so that root path is "/", not "" */
- p--;
- buf[p] = '\0';
- return p;
- }
- }
-
- if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
- return -FDT_ERR_BADOFFSET;
- else if (offset == -FDT_ERR_BADOFFSET)
- return -FDT_ERR_BADSTRUCTURE;
-
- return offset; /* error from fdt_next_node() */
-}
-
-int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
- int supernodedepth, int *nodedepth)
-{
- int offset, depth;
- int supernodeoffset = -FDT_ERR_INTERNAL;
-
- FDT_CHECK_HEADER(fdt);
-
- if (supernodedepth < 0)
- return -FDT_ERR_NOTFOUND;
-
- for (offset = 0, depth = 0;
- (offset >= 0) && (offset <= nodeoffset);
- offset = fdt_next_node(fdt, offset, &depth)) {
- if (depth == supernodedepth)
- supernodeoffset = offset;
-
- if (offset == nodeoffset) {
- if (nodedepth)
- *nodedepth = depth;
-
- if (supernodedepth > depth)
- return -FDT_ERR_NOTFOUND;
- else
- return supernodeoffset;
- }
- }
-
- if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
- return -FDT_ERR_BADOFFSET;
- else if (offset == -FDT_ERR_BADOFFSET)
- return -FDT_ERR_BADSTRUCTURE;
-
- return offset; /* error from fdt_next_node() */
-}
-
-int fdt_node_depth(const void *fdt, int nodeoffset)
-{
- int nodedepth;
- int err;
-
- err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
- if (err)
- return (err < 0) ? err : -FDT_ERR_INTERNAL;
- return nodedepth;
-}
-
-int fdt_parent_offset(const void *fdt, int nodeoffset)
-{
- int nodedepth = fdt_node_depth(fdt, nodeoffset);
-
- if (nodedepth < 0)
- return nodedepth;
- return fdt_supernode_atdepth_offset(fdt, nodeoffset,
- nodedepth - 1, NULL);
-}
-
-int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
- const char *propname,
- const void *propval, int proplen)
-{
- int offset;
- const void *val;
- int len;
-
- FDT_CHECK_HEADER(fdt);
-
- /* FIXME: The algorithm here is pretty horrible: we scan each
- * property of a node in fdt_getprop(), then if that didn't
- * find what we want, we scan over them again making our way
- * to the next node. Still it's the easiest to implement
- * approach; performance can come later. */
- for (offset = fdt_next_node(fdt, startoffset, NULL);
- offset >= 0;
- offset = fdt_next_node(fdt, offset, NULL)) {
- val = fdt_getprop(fdt, offset, propname, &len);
- if (val && (len == proplen)
- && (memcmp(val, propval, len) == 0))
- return offset;
- }
-
- return offset; /* error from fdt_next_node() */
-}
-
-int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
-{
- if ((phandle == 0) || (phandle == -1))
- return -FDT_ERR_BADPHANDLE;
- phandle = cpu_to_fdt32(phandle);
- return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle",
- &phandle, sizeof(phandle));
-}
-
-int _stringlist_contains(const char *strlist, int listlen, const char *str)
-{
- int len = strlen(str);
- const char *p;
-
- while (listlen >= len) {
- if (memcmp(str, strlist, len+1) == 0)
- return 1;
- p = memchr(strlist, '\0', listlen);
- if (!p)
- return 0; /* malformed strlist.. */
- listlen -= (p-strlist) + 1;
- strlist = p + 1;
- }
- return 0;
-}
-
-int fdt_node_check_compatible(const void *fdt, int nodeoffset,
- const char *compatible)
-{
- const void *prop;
- int len;
-
- prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
- if (!prop)
- return len;
- if (_stringlist_contains(prop, len, compatible))
- return 0;
- else
- return 1;
-}
-
-int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
- const char *compatible)
-{
- int offset, err;
-
- FDT_CHECK_HEADER(fdt);
-
- /* FIXME: The algorithm here is pretty horrible: we scan each
- * property of a node in fdt_node_check_compatible(), then if
- * that didn't find what we want, we scan over them again
- * making our way to the next node. Still it's the easiest to
- * implement approach; performance can come later. */
- for (offset = fdt_next_node(fdt, startoffset, NULL);
- offset >= 0;
- offset = fdt_next_node(fdt, offset, NULL)) {
- err = fdt_node_check_compatible(fdt, offset, compatible);
- if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
- return err;
- else if (err == 0)
- return offset;
- }
-
- return offset; /* error from fdt_next_node() */
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_blocks_misordered(const void *fdt,
- int mem_rsv_size, int struct_size)
-{
- return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
- || (fdt_off_dt_struct(fdt) <
- (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
- || (fdt_off_dt_strings(fdt) <
- (fdt_off_dt_struct(fdt) + struct_size))
- || (fdt_totalsize(fdt) <
- (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
-}
-
-static int _fdt_rw_check_header(void *fdt)
-{
- FDT_CHECK_HEADER(fdt);
-
- if (fdt_version(fdt) < 17)
- return -FDT_ERR_BADVERSION;
- if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
- fdt_size_dt_struct(fdt)))
- return -FDT_ERR_BADLAYOUT;
- if (fdt_version(fdt) > 17)
- fdt_set_version(fdt, 17);
-
- return 0;
-}
-
-#define FDT_RW_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = _fdt_rw_check_header(fdt)) != 0) \
- return err; \
- }
-
-static inline int _fdt_data_size(void *fdt)
-{
- return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
-}
-
-static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen)
-{
- char *p = splicepoint;
- char *end = (char *)fdt + _fdt_data_size(fdt);
-
- if (((p + oldlen) < p) || ((p + oldlen) > end))
- return -FDT_ERR_BADOFFSET;
- if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
- return -FDT_ERR_NOSPACE;
- memmove(p + newlen, p + oldlen, end - p - oldlen);
- return 0;
-}
-
-static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
- int oldn, int newn)
-{
- int delta = (newn - oldn) * sizeof(*p);
- int err;
- err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
- if (err)
- return err;
- fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
- fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
- return 0;
-}
-
-static int _fdt_splice_struct(void *fdt, void *p,
- int oldlen, int newlen)
-{
- int delta = newlen - oldlen;
- int err;
-
- if ((err = _fdt_splice(fdt, p, oldlen, newlen)))
- return err;
-
- fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
- fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
- return 0;
-}
-
-static int _fdt_splice_string(void *fdt, int newlen)
-{
- void *p = (char *)fdt
- + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
- int err;
-
- if ((err = _fdt_splice(fdt, p, 0, newlen)))
- return err;
-
- fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
- return 0;
-}
-
-static int _fdt_find_add_string(void *fdt, const char *s)
-{
- char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
- const char *p;
- char *new;
- int len = strlen(s) + 1;
- int err;
-
- p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s);
- if (p)
- /* found it */
- return (p - strtab);
-
- new = strtab + fdt_size_dt_strings(fdt);
- err = _fdt_splice_string(fdt, len);
- if (err)
- return err;
-
- memcpy(new, s, len);
- return (new - strtab);
-}
-
-int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
-{
- struct fdt_reserve_entry *re;
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
- err = _fdt_splice_mem_rsv(fdt, re, 0, 1);
- if (err)
- return err;
-
- re->address = cpu_to_fdt64(address);
- re->size = cpu_to_fdt64(size);
- return 0;
-}
-
-int fdt_del_mem_rsv(void *fdt, int n)
-{
- struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- if (n >= fdt_num_mem_rsv(fdt))
- return -FDT_ERR_NOTFOUND;
-
- err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
- if (err)
- return err;
- return 0;
-}
-
-static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
- int len, struct fdt_property **prop)
-{
- int oldlen;
- int err;
-
- *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
- if (! (*prop))
- return oldlen;
-
- if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
- FDT_TAGALIGN(len))))
- return err;
-
- (*prop)->len = cpu_to_fdt32(len);
- return 0;
-}
-
-static int _fdt_add_property(void *fdt, int nodeoffset, const char *name,
- int len, struct fdt_property **prop)
-{
- int proplen;
- int nextoffset;
- int namestroff;
- int err;
-
- if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0)
- return nextoffset;
-
- namestroff = _fdt_find_add_string(fdt, name);
- if (namestroff < 0)
- return namestroff;
-
- *prop = _fdt_offset_ptr_w(fdt, nextoffset);
- proplen = sizeof(**prop) + FDT_TAGALIGN(len);
-
- err = _fdt_splice_struct(fdt, *prop, 0, proplen);
- if (err)
- return err;
-
- (*prop)->tag = cpu_to_fdt32(FDT_PROP);
- (*prop)->nameoff = cpu_to_fdt32(namestroff);
- (*prop)->len = cpu_to_fdt32(len);
- return 0;
-}
-
-int fdt_set_name(void *fdt, int nodeoffset, const char *name)
-{
- char *namep;
- int oldlen, newlen;
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
- if (!namep)
- return oldlen;
-
- newlen = strlen(name);
-
- err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1),
- FDT_TAGALIGN(newlen+1));
- if (err)
- return err;
-
- memcpy(namep, name, newlen+1);
- return 0;
-}
-
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
- const void *val, int len)
-{
- struct fdt_property *prop;
- int err;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop);
- if (err == -FDT_ERR_NOTFOUND)
- err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
- if (err)
- return err;
-
- memcpy(prop->data, val, len);
- return 0;
-}
-
-int fdt_delprop(void *fdt, int nodeoffset, const char *name)
-{
- struct fdt_property *prop;
- int len, proplen;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
- if (! prop)
- return len;
-
- proplen = sizeof(*prop) + FDT_TAGALIGN(len);
- return _fdt_splice_struct(fdt, prop, proplen, 0);
-}
-
-int fdt_add_subnode_namelen(void *fdt, int parentoffset,
- const char *name, int namelen)
-{
- struct fdt_node_header *nh;
- int offset, nextoffset;
- int nodelen;
- int err;
- uint32_t tag;
- uint32_t *endtag;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
- if (offset >= 0)
- return -FDT_ERR_EXISTS;
- else if (offset != -FDT_ERR_NOTFOUND)
- return offset;
-
- /* Try to place the new node after the parent's properties */
- fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
- } while ((tag == FDT_PROP) || (tag == FDT_NOP));
-
- nh = _fdt_offset_ptr_w(fdt, offset);
- nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
-
- err = _fdt_splice_struct(fdt, nh, 0, nodelen);
- if (err)
- return err;
-
- nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
- memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
- memcpy(nh->name, name, namelen);
- endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
- *endtag = cpu_to_fdt32(FDT_END_NODE);
-
- return offset;
-}
-
-int fdt_add_subnode(void *fdt, int parentoffset, const char *name)
-{
- return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name));
-}
-
-int fdt_del_node(void *fdt, int nodeoffset)
-{
- int endoffset;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- endoffset = _fdt_node_end_offset(fdt, nodeoffset);
- if (endoffset < 0)
- return endoffset;
-
- return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
- endoffset - nodeoffset, 0);
-}
-
-static void _fdt_packblocks(const char *old, char *new,
- int mem_rsv_size, int struct_size)
-{
- int mem_rsv_off, struct_off, strings_off;
-
- mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
- struct_off = mem_rsv_off + mem_rsv_size;
- strings_off = struct_off + struct_size;
-
- memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
- fdt_set_off_mem_rsvmap(new, mem_rsv_off);
-
- memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
- fdt_set_off_dt_struct(new, struct_off);
- fdt_set_size_dt_struct(new, struct_size);
-
- memmove(new + strings_off, old + fdt_off_dt_strings(old),
- fdt_size_dt_strings(old));
- fdt_set_off_dt_strings(new, strings_off);
- fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
-}
-
-int fdt_open_into(const void *fdt, void *buf, int bufsize)
-{
- int err;
- int mem_rsv_size, struct_size;
- int newsize;
- const char *fdtstart = fdt;
- const char *fdtend = fdtstart + fdt_totalsize(fdt);
- char *tmp;
-
- FDT_CHECK_HEADER(fdt);
-
- mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
- * sizeof(struct fdt_reserve_entry);
-
- if (fdt_version(fdt) >= 17) {
- struct_size = fdt_size_dt_struct(fdt);
- } else {
- struct_size = 0;
- while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
- ;
- }
-
- if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
- /* no further work necessary */
- err = fdt_move(fdt, buf, bufsize);
- if (err)
- return err;
- fdt_set_version(buf, 17);
- fdt_set_size_dt_struct(buf, struct_size);
- fdt_set_totalsize(buf, bufsize);
- return 0;
- }
-
- /* Need to reorder */
- newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
- + struct_size + fdt_size_dt_strings(fdt);
-
- if (bufsize < newsize)
- return -FDT_ERR_NOSPACE;
-
- /* First attempt to build converted tree at beginning of buffer */
- tmp = buf;
- /* But if that overlaps with the old tree... */
- if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
- /* Try right after the old tree instead */
- tmp = (char *)(uintptr_t)fdtend;
- if ((tmp + newsize) > ((char *)buf + bufsize))
- return -FDT_ERR_NOSPACE;
- }
-
- _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size);
- memmove(buf, tmp, newsize);
-
- fdt_set_magic(buf, FDT_MAGIC);
- fdt_set_totalsize(buf, bufsize);
- fdt_set_version(buf, 17);
- fdt_set_last_comp_version(buf, 16);
- fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
-
- return 0;
-}
-
-int fdt_pack(void *fdt)
-{
- int mem_rsv_size;
-
- FDT_RW_CHECK_HEADER(fdt);
-
- mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
- * sizeof(struct fdt_reserve_entry);
- _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
- fdt_set_totalsize(fdt, _fdt_data_size(fdt));
-
- return 0;
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-struct fdt_errtabent {
- const char *str;
-};
-
-#define FDT_ERRTABENT(val) \
- [(val)] = { .str = #val, }
-
-static struct fdt_errtabent fdt_errtable[] = {
- FDT_ERRTABENT(FDT_ERR_NOTFOUND),
- FDT_ERRTABENT(FDT_ERR_EXISTS),
- FDT_ERRTABENT(FDT_ERR_NOSPACE),
-
- FDT_ERRTABENT(FDT_ERR_BADOFFSET),
- FDT_ERRTABENT(FDT_ERR_BADPATH),
- FDT_ERRTABENT(FDT_ERR_BADSTATE),
-
- FDT_ERRTABENT(FDT_ERR_TRUNCATED),
- FDT_ERRTABENT(FDT_ERR_BADMAGIC),
- FDT_ERRTABENT(FDT_ERR_BADVERSION),
- FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
- FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
-};
-#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
-
-const char *fdt_strerror(int errval)
-{
- if (errval > 0)
- return "<valid offset/length>";
- else if (errval == 0)
- return "<no error>";
- else if (errval > -FDT_ERRTABSIZE) {
- const char *s = fdt_errtable[-errval].str;
-
- if (s)
- return s;
- }
-
- return "<unknown error>";
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-static int _fdt_sw_check_header(void *fdt)
-{
- if (fdt_magic(fdt) != FDT_SW_MAGIC)
- return -FDT_ERR_BADMAGIC;
- /* FIXME: should check more details about the header state */
- return 0;
-}
-
-#define FDT_SW_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = _fdt_sw_check_header(fdt)) != 0) \
- return err; \
- }
-
-static void *_fdt_grab_space(void *fdt, int len)
-{
- int offset = fdt_size_dt_struct(fdt);
- int spaceleft;
-
- spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
- - fdt_size_dt_strings(fdt);
-
- if ((offset + len < offset) || (offset + len > spaceleft))
- return NULL;
-
- fdt_set_size_dt_struct(fdt, offset + len);
- return fdt_offset_ptr_w(fdt, offset, len);
-}
-
-int fdt_create(void *buf, int bufsize)
-{
- void *fdt = buf;
-
- if (bufsize < sizeof(struct fdt_header))
- return -FDT_ERR_NOSPACE;
-
- memset(buf, 0, bufsize);
-
- fdt_set_magic(fdt, FDT_SW_MAGIC);
- fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
- fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
- fdt_set_totalsize(fdt, bufsize);
-
- fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
- sizeof(struct fdt_reserve_entry)));
- fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
- fdt_set_off_dt_strings(fdt, bufsize);
-
- return 0;
-}
-
-int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
-{
- struct fdt_reserve_entry *re;
- int offset;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- if (fdt_size_dt_struct(fdt))
- return -FDT_ERR_BADSTATE;
-
- offset = fdt_off_dt_struct(fdt);
- if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
- return -FDT_ERR_NOSPACE;
-
- re = (struct fdt_reserve_entry *)((char *)fdt + offset);
- re->address = cpu_to_fdt64(addr);
- re->size = cpu_to_fdt64(size);
-
- fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
-
- return 0;
-}
-
-int fdt_finish_reservemap(void *fdt)
-{
- return fdt_add_reservemap_entry(fdt, 0, 0);
-}
-
-int fdt_begin_node(void *fdt, const char *name)
-{
- struct fdt_node_header *nh;
- int namelen = strlen(name) + 1;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
- if (! nh)
- return -FDT_ERR_NOSPACE;
-
- nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
- memcpy(nh->name, name, namelen);
- return 0;
-}
-
-int fdt_end_node(void *fdt)
-{
- uint32_t *en;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- en = _fdt_grab_space(fdt, FDT_TAGSIZE);
- if (! en)
- return -FDT_ERR_NOSPACE;
-
- *en = cpu_to_fdt32(FDT_END_NODE);
- return 0;
-}
-
-static int _fdt_find_add_string(void *fdt, const char *s)
-{
- char *strtab = (char *)fdt + fdt_totalsize(fdt);
- const char *p;
- int strtabsize = fdt_size_dt_strings(fdt);
- int len = strlen(s) + 1;
- int struct_top, offset;
-
- p = _fdt_find_string(strtab - strtabsize, strtabsize, s);
- if (p)
- return p - strtab;
-
- /* Add it */
- offset = -strtabsize - len;
- struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
- if (fdt_totalsize(fdt) + offset < struct_top)
- return 0; /* no more room :( */
-
- memcpy(strtab + offset, s, len);
- fdt_set_size_dt_strings(fdt, strtabsize + len);
- return offset;
-}
-
-int fdt_property(void *fdt, const char *name, const void *val, int len)
-{
- struct fdt_property *prop;
- int nameoff;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- nameoff = _fdt_find_add_string(fdt, name);
- if (nameoff == 0)
- return -FDT_ERR_NOSPACE;
-
- prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
- if (! prop)
- return -FDT_ERR_NOSPACE;
-
- prop->tag = cpu_to_fdt32(FDT_PROP);
- prop->nameoff = cpu_to_fdt32(nameoff);
- prop->len = cpu_to_fdt32(len);
- memcpy(prop->data, val, len);
- return 0;
-}
-
-int fdt_finish(void *fdt)
-{
- char *p = (char *)fdt;
- uint32_t *end;
- int oldstroffset, newstroffset;
- uint32_t tag;
- int offset, nextoffset;
-
- FDT_SW_CHECK_HEADER(fdt);
-
- /* Add terminator */
- end = _fdt_grab_space(fdt, sizeof(*end));
- if (! end)
- return -FDT_ERR_NOSPACE;
- *end = cpu_to_fdt32(FDT_END);
-
- /* Relocate the string table */
- oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
- newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
- memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
- fdt_set_off_dt_strings(fdt, newstroffset);
-
- /* Walk the structure, correcting string offsets */
- offset = 0;
- while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
- if (tag == FDT_PROP) {
- struct fdt_property *prop =
- fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
- int nameoff;
-
- if (! prop)
- return -FDT_ERR_BADSTRUCTURE;
-
- nameoff = fdt32_to_cpu(prop->nameoff);
- nameoff += fdt_size_dt_strings(fdt);
- prop->nameoff = cpu_to_fdt32(nameoff);
- }
- offset = nextoffset;
- }
-
- /* Finally, adjust the header */
- fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
- fdt_set_magic(fdt, FDT_MAGIC);
- return 0;
-}
+++ /dev/null
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include "libfdt_env.h"
-
-#include <fdt.h>
-#include <libfdt.h>
-
-#include "libfdt_internal.h"
-
-int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
- const void *val, int len)
-{
- void *propval;
- int proplen;
-
- propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
- if (! propval)
- return proplen;
-
- if (proplen != len)
- return -FDT_ERR_NOSPACE;
-
- memcpy(propval, val, len);
- return 0;
-}
-
-static void _fdt_nop_region(void *start, int len)
-{
- uint32_t *p;
-
- for (p = start; (char *)p < ((char *)start + len); p++)
- *p = cpu_to_fdt32(FDT_NOP);
-}
-
-int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
-{
- struct fdt_property *prop;
- int len;
-
- prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
- if (! prop)
- return len;
-
- _fdt_nop_region(prop, len + sizeof(*prop));
-
- return 0;
-}
-
-int _fdt_node_end_offset(void *fdt, int nodeoffset)
-{
- int level = 0;
- uint32_t tag;
- int offset, nextoffset;
-
- tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
- if (tag != FDT_BEGIN_NODE)
- return -FDT_ERR_BADOFFSET;
- do {
- offset = nextoffset;
- tag = fdt_next_tag(fdt, offset, &nextoffset);
-
- switch (tag) {
- case FDT_END:
- return offset;
-
- case FDT_BEGIN_NODE:
- level++;
- break;
-
- case FDT_END_NODE:
- level--;
- break;
-
- case FDT_PROP:
- case FDT_NOP:
- break;
-
- default:
- return -FDT_ERR_BADSTRUCTURE;
- }
- } while (level >= 0);
-
- return nextoffset;
-}
-
-int fdt_nop_node(void *fdt, int nodeoffset)
-{
- int endoffset;
-
- endoffset = _fdt_node_end_offset(fdt, nodeoffset);
- if (endoffset < 0)
- return endoffset;
-
- _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0),
- endoffset - nodeoffset);
- return 0;
-}
+++ /dev/null
-#ifndef _LIBFDT_H
-#define _LIBFDT_H
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <libfdt_env.h>
-#include <fdt.h>
-
-#define FDT_FIRST_SUPPORTED_VERSION 0x10
-#define FDT_LAST_SUPPORTED_VERSION 0x11
-
-/* Error codes: informative error codes */
-#define FDT_ERR_NOTFOUND 1
- /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
-#define FDT_ERR_EXISTS 2
- /* FDT_ERR_EXISTS: Attemped to create a node or property which
- * already exists */
-#define FDT_ERR_NOSPACE 3
- /* FDT_ERR_NOSPACE: Operation needed to expand the device
- * tree, but its buffer did not have sufficient space to
- * contain the expanded tree. Use fdt_open_into() to move the
- * device tree to a buffer with more space. */
-
-/* Error codes: codes for bad parameters */
-#define FDT_ERR_BADOFFSET 4
- /* FDT_ERR_BADOFFSET: Function was passed a structure block
- * offset which is out-of-bounds, or which points to an
- * unsuitable part of the structure for the operation. */
-#define FDT_ERR_BADPATH 5
- /* FDT_ERR_BADPATH: Function was passed a badly formatted path
- * (e.g. missing a leading / for a function which requires an
- * absolute path) */
-#define FDT_ERR_BADPHANDLE 6
- /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
- * value. phandle values of 0 and -1 are not permitted. */
-#define FDT_ERR_BADSTATE 7
- /* FDT_ERR_BADSTATE: Function was passed an incomplete device
- * tree created by the sequential-write functions, which is
- * not sufficiently complete for the requested operation. */
-
-/* Error codes: codes for bad device tree blobs */
-#define FDT_ERR_TRUNCATED 8
- /* FDT_ERR_TRUNCATED: Structure block of the given device tree
- * ends without an FDT_END tag. */
-#define FDT_ERR_BADMAGIC 9
- /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
- * device tree at all - it is missing the flattened device
- * tree magic number. */
-#define FDT_ERR_BADVERSION 10
- /* FDT_ERR_BADVERSION: Given device tree has a version which
- * can't be handled by the requested operation. For
- * read-write functions, this may mean that fdt_open_into() is
- * required to convert the tree to the expected version. */
-#define FDT_ERR_BADSTRUCTURE 11
- /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
- * structure block or other serious error (e.g. misnested
- * nodes, or subnodes preceding properties). */
-#define FDT_ERR_BADLAYOUT 12
- /* FDT_ERR_BADLAYOUT: For read-write functions, the given
- * device tree has it's sub-blocks in an order that the
- * function can't handle (memory reserve map, then structure,
- * then strings). Use fdt_open_into() to reorganize the tree
- * into a form suitable for the read-write operations. */
-
-/* "Can't happen" error indicating a bug in libfdt */
-#define FDT_ERR_INTERNAL 13
- /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
- * Should never be returned, if it is, it indicates a bug in
- * libfdt itself. */
-
-#define FDT_ERR_MAX 13
-
-/**********************************************************************/
-/* Low-level functions (you probably don't need these) */
-/**********************************************************************/
-
-const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
-static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
-{
- return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
-}
-
-uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
-
-/**********************************************************************/
-/* Traversal functions */
-/**********************************************************************/
-
-int fdt_next_node(const void *fdt, int offset, int *depth);
-
-/**********************************************************************/
-/* General functions */
-/**********************************************************************/
-
-#define fdt_get_header(fdt, field) \
- (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
-#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
-#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
-#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
-#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
-#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
-#define fdt_version(fdt) (fdt_get_header(fdt, version))
-#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
-#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
-#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
-#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
-
-#define __fdt_set_hdr(name) \
- static inline void fdt_set_##name(void *fdt, uint32_t val) \
- { \
- struct fdt_header *fdth = fdt; \
- fdth->name = cpu_to_fdt32(val); \
- }
-__fdt_set_hdr(magic);
-__fdt_set_hdr(totalsize);
-__fdt_set_hdr(off_dt_struct);
-__fdt_set_hdr(off_dt_strings);
-__fdt_set_hdr(off_mem_rsvmap);
-__fdt_set_hdr(version);
-__fdt_set_hdr(last_comp_version);
-__fdt_set_hdr(boot_cpuid_phys);
-__fdt_set_hdr(size_dt_strings);
-__fdt_set_hdr(size_dt_struct);
-#undef __fdt_set_hdr
-
-/**
- * fdt_check_header - sanity check a device tree or possible device tree
- * @fdt: pointer to data which might be a flattened device tree
- *
- * fdt_check_header() checks that the given buffer contains what
- * appears to be a flattened device tree with sane information in its
- * header.
- *
- * returns:
- * 0, if the buffer appears to contain a valid device tree
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings, as above
- */
-int fdt_check_header(const void *fdt);
-
-/**
- * fdt_move - move a device tree around in memory
- * @fdt: pointer to the device tree to move
- * @buf: pointer to memory where the device is to be moved
- * @bufsize: size of the memory space at buf
- *
- * fdt_move() relocates, if possible, the device tree blob located at
- * fdt to the buffer at buf of size bufsize. The buffer may overlap
- * with the existing device tree blob at fdt. Therefore,
- * fdt_move(fdt, fdt, fdt_totalsize(fdt))
- * should always succeed.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_move(const void *fdt, void *buf, int bufsize);
-
-/**********************************************************************/
-/* Read-only functions */
-/**********************************************************************/
-
-/**
- * fdt_string - retrieve a string from the strings block of a device tree
- * @fdt: pointer to the device tree blob
- * @stroffset: offset of the string within the strings block (native endian)
- *
- * fdt_string() retrieves a pointer to a single string from the
- * strings block of the device tree blob at fdt.
- *
- * returns:
- * a pointer to the string, on success
- * NULL, if stroffset is out of bounds
- */
-const char *fdt_string(const void *fdt, int stroffset);
-
-/**
- * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
- * @fdt: pointer to the device tree blob
- *
- * Returns the number of entries in the device tree blob's memory
- * reservation map. This does not include the terminating 0,0 entry
- * or any other (0,0) entries reserved for expansion.
- *
- * returns:
- * the number of entries
- */
-int fdt_num_mem_rsv(const void *fdt);
-
-/**
- * fdt_get_mem_rsv - retrieve one memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @address, @size: pointers to 64-bit variables
- *
- * On success, *address and *size will contain the address and size of
- * the n-th reserve map entry from the device tree blob, in
- * native-endian format.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
-
-/**
- * fdt_subnode_offset_namelen - find a subnode based on substring
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_subnode_offset(), but only examine the first
- * namelen characters of name for matching the subnode name. This is
- * useful for finding subnodes based on a portion of a larger string,
- * such as a full path.
- */
-int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
- const char *name, int namelen);
-/**
- * fdt_subnode_offset - find a subnode of a given node
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- *
- * fdt_subnode_offset() finds a subnode of the node at structure block
- * offset parentoffset with the given name. name may include a unit
- * address, in which case fdt_subnode_offset() will find the subnode
- * with that unit address, or the unit address may be omitted, in
- * which case fdt_subnode_offset() will find an arbitrary subnode
- * whose name excluding unit address matches the given name.
- *
- * returns:
- * structure block offset of the requested subnode (>=0), on success
- * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
- * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
-
-/**
- * fdt_path_offset - find a tree node by its full path
- * @fdt: pointer to the device tree blob
- * @path: full path of the node to locate
- *
- * fdt_path_offset() finds a node of a given path in the device tree.
- * Each path component may omit the unit address portion, but the
- * results of this are undefined if any such path component is
- * ambiguous (that is if there are multiple nodes at the relevant
- * level matching the given component, differentiated only by unit
- * address).
- *
- * returns:
- * structure block offset of the node with the requested path (>=0), on success
- * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
- * -FDT_ERR_NOTFOUND, if the requested node does not exist
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_path_offset(const void *fdt, const char *path);
-
-/**
- * fdt_get_name - retrieve the name of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of the starting node
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_name() retrieves the name (including unit address) of the
- * device tree node at structure block offset nodeoffset. If lenp is
- * non-NULL, the length of this name is also returned, in the integer
- * pointed to by lenp.
- *
- * returns:
- * pointer to the node's name, on success
- * If lenp is non-NULL, *lenp contains the length of that name (>=0)
- * NULL, on error
- * if lenp is non-NULL *lenp contains an error code (<0):
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
-
-/**
- * fdt_get_property - find a given property in a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_get_property() retrieves a pointer to the fdt_property
- * structure within the device tree blob corresponding to the property
- * named 'name' of the node at offset nodeoffset. If lenp is
- * non-NULL, the length of the property value is also returned, in the
- * integer pointed to by lenp.
- *
- * returns:
- * pointer to the structure representing the property
- * if lenp is non-NULL, *lenp contains the length of the property
- * value (>=0)
- * NULL, on error
- * if lenp is non-NULL, *lenp contains an error code (<0):
- * -FDT_ERR_NOTFOUND, node does not have named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
- const char *name, int *lenp);
-static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
- const char *name,
- int *lenp)
-{
- return (struct fdt_property *)(uintptr_t)
- fdt_get_property(fdt, nodeoffset, name, lenp);
-}
-
-/**
- * fdt_getprop - retrieve the value of a given property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to find
- * @name: name of the property to find
- * @lenp: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_getprop() retrieves a pointer to the value of the property
- * named 'name' of the node at offset nodeoffset (this will be a
- * pointer to within the device blob itself, not a copy of the value).
- * If lenp is non-NULL, the length of the property value is also
- * returned, in the integer pointed to by lenp.
- *
- * returns:
- * pointer to the property's value
- * if lenp is non-NULL, *lenp contains the length of the property
- * value (>=0)
- * NULL, on error
- * if lenp is non-NULL, *lenp contains an error code (<0):
- * -FDT_ERR_NOTFOUND, node does not have named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-const void *fdt_getprop(const void *fdt, int nodeoffset,
- const char *name, int *lenp);
-static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
- const char *name, int *lenp)
-{
- return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
-}
-
-/**
- * fdt_get_phandle - retrieve the phandle of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of the node
- *
- * fdt_get_phandle() retrieves the phandle of the device tree node at
- * structure block offset nodeoffset.
- *
- * returns:
- * the phandle of the node at nodeoffset, on success (!= 0, != -1)
- * 0, if the node has no phandle, or another error occurs
- */
-uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
-
-/**
- * fdt_get_path - determine the full path of a node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose path to find
- * @buf: character buffer to contain the returned path (will be overwritten)
- * @buflen: size of the character buffer at buf
- *
- * fdt_get_path() computes the full path of the node at offset
- * nodeoffset, and records that path in the buffer at buf.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- * 0, on success
- * buf contains the absolute path of the node at
- * nodeoffset, as a NUL-terminated string.
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
- * characters and will not fit in the given buffer.
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
-
-/**
- * fdt_supernode_atdepth_offset - find a specific ancestor of a node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- * @supernodedepth: depth of the ancestor to find
- * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
- *
- * fdt_supernode_atdepth_offset() finds an ancestor of the given node
- * at a specific depth from the root (where the root itself has depth
- * 0, its immediate subnodes depth 1 and so forth). So
- * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
- * will always return 0, the offset of the root node. If the node at
- * nodeoffset has depth D, then:
- * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
- * will return nodeoffset itself.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
-
- * structure block offset of the node at node offset's ancestor
- * of depth supernodedepth (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
-* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
- int supernodedepth, int *nodedepth);
-
-/**
- * fdt_node_depth - find the depth of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- *
- * fdt_node_depth() finds the depth of a given node. The root node
- * has depth 0, its immediate subnodes depth 1 and so forth.
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset.
- *
- * returns:
- * depth of the node at nodeoffset (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_depth(const void *fdt, int nodeoffset);
-
-/**
- * fdt_parent_offset - find the parent of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose parent to find
- *
- * fdt_parent_offset() locates the parent node of a given node (that
- * is, it finds the offset of the node which contains the node at
- * nodeoffset as a subnode).
- *
- * NOTE: This function is expensive, as it must scan the device tree
- * structure from the start to nodeoffset, *twice*.
- *
- * returns:
- * structure block offset of the parent of the node at nodeoffset
- * (>=0), on success
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_parent_offset(const void *fdt, int nodeoffset);
-
-/**
- * fdt_node_offset_by_prop_value - find nodes with a given property value
- * @fdt: pointer to the device tree blob
- * @startoffset: only find nodes after this offset
- * @propname: property name to check
- * @propval: property value to search for
- * @proplen: length of the value in propval
- *
- * fdt_node_offset_by_prop_value() returns the offset of the first
- * node after startoffset, which has a property named propname whose
- * value is of length proplen and has value equal to propval; or if
- * startoffset is -1, the very first such node in the tree.
- *
- * To iterate through all nodes matching the criterion, the following
- * idiom can be used:
- * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
- * propval, proplen);
- * while (offset != -FDT_ERR_NOTFOUND) {
- * // other code here
- * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
- * propval, proplen);
- * }
- *
- * Note the -1 in the first call to the function, if 0 is used here
- * instead, the function will never locate the root node, even if it
- * matches the criterion.
- *
- * returns:
- * structure block offset of the located node (>= 0, >startoffset),
- * on success
- * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
- * tree after startoffset
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
- const char *propname,
- const void *propval, int proplen);
-
-/**
- * fdt_node_offset_by_phandle - find the node with a given phandle
- * @fdt: pointer to the device tree blob
- * @phandle: phandle value
- *
- * fdt_node_offset_by_phandle() returns the offset of the node
- * which has the given phandle value. If there is more than one node
- * in the tree with the given phandle (an invalid tree), results are
- * undefined.
- *
- * returns:
- * structure block offset of the located node (>= 0), on success
- * -FDT_ERR_NOTFOUND, no node with that phandle exists
- * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
-
-/**
- * fdt_node_check_compatible: check a node's compatible property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of a tree node
- * @compatible: string to match against
- *
- *
- * fdt_node_check_compatible() returns 0 if the given node contains a
- * 'compatible' property with the given string as one of its elements,
- * it returns non-zero otherwise, or on error.
- *
- * returns:
- * 0, if the node has a 'compatible' property listing the given string
- * 1, if the node has a 'compatible' property, but it does not list
- * the given string
- * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
- * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_check_compatible(const void *fdt, int nodeoffset,
- const char *compatible);
-
-/**
- * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
- * @fdt: pointer to the device tree blob
- * @startoffset: only find nodes after this offset
- * @compatible: 'compatible' string to match against
- *
- * fdt_node_offset_by_compatible() returns the offset of the first
- * node after startoffset, which has a 'compatible' property which
- * lists the given compatible string; or if startoffset is -1, the
- * very first such node in the tree.
- *
- * To iterate through all nodes matching the criterion, the following
- * idiom can be used:
- * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
- * while (offset != -FDT_ERR_NOTFOUND) {
- * // other code here
- * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
- * }
- *
- * Note the -1 in the first call to the function, if 0 is used here
- * instead, the function will never locate the root node, even if it
- * matches the criterion.
- *
- * returns:
- * structure block offset of the located node (>= 0, >startoffset),
- * on success
- * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
- * tree after startoffset
- * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE, standard meanings
- */
-int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
- const char *compatible);
-
-/**********************************************************************/
-/* Write-in-place functions */
-/**********************************************************************/
-
-/**
- * fdt_setprop_inplace - change a property's value, but not its size
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: pointer to data to replace the property value with
- * @len: length of the property value
- *
- * fdt_setprop_inplace() replaces the value of a given property with
- * the data in val, of length len. This function cannot change the
- * size of a property, and so will only work if len is equal to the
- * current length of the property.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
- const void *val, int len);
-
-/**
- * fdt_setprop_inplace_cell - change the value of a single-cell property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: cell (32-bit integer) value to replace the property with
- *
- * fdt_setprop_inplace_cell() replaces the value of a given property
- * with the 32-bit integer cell value in val, converting val to
- * big-endian if necessary. This function cannot change the size of a
- * property, and so will only work if the property already exists and
- * has length 4.
- *
- * This function will alter only the bytes in the blob which contain
- * the given property value, and will not alter or move any other part
- * of the tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
- const char *name, uint32_t val)
-{
- val = cpu_to_fdt32(val);
- return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
-}
-
-/**
- * fdt_nop_property - replace a property with nop tags
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to nop
- * @name: name of the property to nop
- *
- * fdt_nop_property() will replace a given property's representation
- * in the blob with FDT_NOP tags, effectively removing it from the
- * tree.
- *
- * This function will alter only the bytes in the blob which contain
- * the property, and will not alter or move any other part of the
- * tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_nop_node - replace a node (subtree) with nop tags
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to nop
- *
- * fdt_nop_node() will replace a given node's representation in the
- * blob, including all its subnodes, if any, with FDT_NOP tags,
- * effectively removing it from the tree.
- *
- * This function will alter only the bytes in the blob which contain
- * the node and its properties and subnodes, and will not alter or
- * move any other part of the tree.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_nop_node(void *fdt, int nodeoffset);
-
-/**********************************************************************/
-/* Sequential write functions */
-/**********************************************************************/
-
-int fdt_create(void *buf, int bufsize);
-int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
-int fdt_finish_reservemap(void *fdt);
-int fdt_begin_node(void *fdt, const char *name);
-int fdt_property(void *fdt, const char *name, const void *val, int len);
-static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
-{
- val = cpu_to_fdt32(val);
- return fdt_property(fdt, name, &val, sizeof(val));
-}
-#define fdt_property_string(fdt, name, str) \
- fdt_property(fdt, name, str, strlen(str)+1)
-int fdt_end_node(void *fdt);
-int fdt_finish(void *fdt);
-
-/**********************************************************************/
-/* Read-write functions */
-/**********************************************************************/
-
-int fdt_open_into(const void *fdt, void *buf, int bufsize);
-int fdt_pack(void *fdt);
-
-/**
- * fdt_add_mem_rsv - add one memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @address, @size: 64-bit values (native endian)
- *
- * Adds a reserve map entry to the given blob reserving a region at
- * address address of length size.
- *
- * This function will insert data into the reserve map and will
- * therefore change the indexes of some entries in the table.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new reservation entry
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
-
-/**
- * fdt_del_mem_rsv - remove a memory reserve map entry
- * @fdt: pointer to the device tree blob
- * @n: entry to remove
- *
- * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
- * the blob.
- *
- * This function will delete data from the reservation table and will
- * therefore change the indexes of some entries in the table.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
- * are less than n+1 reserve map entries)
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_del_mem_rsv(void *fdt, int n);
-
-/**
- * fdt_set_name - change the name of a given node
- * @fdt: pointer to the device tree blob
- * @nodeoffset: structure block offset of a node
- * @name: name to give the node
- *
- * fdt_set_name() replaces the name (including unit address, if any)
- * of the given node with the given string. NOTE: this function can't
- * efficiently check if the new name is unique amongst the given
- * node's siblings; results are undefined if this function is invoked
- * with a name equal to one of the given node's siblings.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
- * to contain the new name
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE, standard meanings
- */
-int fdt_set_name(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_setprop - create or change a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: pointer to data to set the property value to
- * @len: length of the property value
- *
- * fdt_setprop() sets the value of the named property in the given
- * node to the given value and length, creating the property if it
- * does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new property value
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_setprop(void *fdt, int nodeoffset, const char *name,
- const void *val, int len);
-
-/**
- * fdt_setprop_cell - set a property to a single cell value
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @val: 32-bit integer value for the property (native endian)
- *
- * fdt_setprop_cell() sets the value of the named property in the
- * given node to the given cell value (converting to big-endian if
- * necessary), or creates a new property with that value if it does
- * not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new property value
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
- uint32_t val)
-{
- val = cpu_to_fdt32(val);
- return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
-}
-
-/**
- * fdt_setprop_string - set a property to a string value
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to change
- * @name: name of the property to change
- * @str: string value for the property
- *
- * fdt_setprop_string() sets the value of the named property in the
- * given node to the given string value (using the length of the
- * string to determine the new length of the property), or creates a
- * new property with that value if it does not already exist.
- *
- * This function may insert or delete data from the blob, and will
- * therefore change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
- * contain the new property value
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-#define fdt_setprop_string(fdt, nodeoffset, name, str) \
- fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
-
-/**
- * fdt_delprop - delete a property
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node whose property to nop
- * @name: name of the property to nop
- *
- * fdt_del_property() will delete the given property.
- *
- * This function will delete data from the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_NOTFOUND, node does not have the named property
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_delprop(void *fdt, int nodeoffset, const char *name);
-
-/**
- * fdt_add_subnode_namelen - creates a new node based on substring
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- * @namelen: number of characters of name to consider
- *
- * Identical to fdt_add_subnode(), but use only the first namelen
- * characters of name as the name of the new node. This is useful for
- * creating subnodes based on a portion of a larger string, such as a
- * full path.
- */
-int fdt_add_subnode_namelen(void *fdt, int parentoffset,
- const char *name, int namelen);
-
-/**
- * fdt_add_subnode - creates a new node
- * @fdt: pointer to the device tree blob
- * @parentoffset: structure block offset of a node
- * @name: name of the subnode to locate
- *
- * fdt_add_subnode() creates a new node as a subnode of the node at
- * structure block offset parentoffset, with the given name (which
- * should include the unit address, if any).
- *
- * This function will insert data into the blob, and will therefore
- * change the offsets of some existing nodes.
-
- * returns:
- * structure block offset of the created nodeequested subnode (>=0), on success
- * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
- * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
- * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
- * the given name
- * -FDT_ERR_NOSPACE, if there is insufficient free space in the
- * blob to contain the new node
- * -FDT_ERR_NOSPACE
- * -FDT_ERR_BADLAYOUT
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings.
- */
-int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
-
-/**
- * fdt_del_node - delete a node (subtree)
- * @fdt: pointer to the device tree blob
- * @nodeoffset: offset of the node to nop
- *
- * fdt_del_node() will remove the given node, including all its
- * subnodes if any, from the blob.
- *
- * This function will delete data from the blob, and will therefore
- * change the offsets of some existing nodes.
- *
- * returns:
- * 0, on success
- * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
- * -FDT_ERR_BADLAYOUT,
- * -FDT_ERR_BADMAGIC,
- * -FDT_ERR_BADVERSION,
- * -FDT_ERR_BADSTATE,
- * -FDT_ERR_BADSTRUCTURE,
- * -FDT_ERR_TRUNCATED, standard meanings
- */
-int fdt_del_node(void *fdt, int nodeoffset);
-
-/**********************************************************************/
-/* Debugging / informational functions */
-/**********************************************************************/
-
-const char *fdt_strerror(int errval);
-
-#endif /* _LIBFDT_H */
+++ /dev/null
-#ifndef _LIBFDT_INTERNAL_H
-#define _LIBFDT_INTERNAL_H
-/*
- * libfdt - Flat Device Tree manipulation
- * Copyright (C) 2006 David Gibson, IBM Corporation.
- *
- * libfdt is dual licensed: you can use it either under the terms of
- * the GPL, or the BSD license, at your option.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Alternatively,
- *
- * b) Redistribution and use in source and binary forms, with or
- * without modification, are permitted provided that the following
- * conditions are met:
- *
- * 1. Redistributions of source code must retain the above
- * copyright notice, this list of conditions and the following
- * disclaimer.
- * 2. Redistributions in binary form must reproduce the above
- * copyright notice, this list of conditions and the following
- * disclaimer in the documentation and/or other materials
- * provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
- * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-#include <fdt.h>
-
-#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
-#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
-
-#define FDT_CHECK_HEADER(fdt) \
- { \
- int err; \
- if ((err = fdt_check_header(fdt)) != 0) \
- return err; \
- }
-
-uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
-int _fdt_check_node_offset(const void *fdt, int offset);
-const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
-int _fdt_node_end_offset(void *fdt, int nodeoffset);
-
-static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
-{
- return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
-}
-
-static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
-{
- return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
-}
-
-static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
-{
- const struct fdt_reserve_entry *rsv_table =
- (const struct fdt_reserve_entry *)
- ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
-
- return rsv_table + n;
-}
-static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
-{
- return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
-}
-
-#define FDT_SW_MAGIC (~FDT_MAGIC)
-
-#endif /* _LIBFDT_INTERNAL_H */
{
int in_fd, out_fd;
int nblks, i;
- uint cksum, *cp;
+ unsigned int cksum, *cp;
struct stat st;
boot_block_t bt;
cksum = 0;
cp = (void *)&bt;
- for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+ for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
cksum += *cp++;
/* Assume zImage is an ELF file, and skip the 64K header.
exit(4);
}
- if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+ if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
fprintf(stderr, "%s is not an ELF image\n", argv[1]);
exit(4);
}
perror("zImage read");
exit(5);
}
- cp = (uint *)tmpbuf;
- for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+ cp = (unsigned int *)tmpbuf;
+ for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
cksum += *cp++;
if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
perror("boot-image write");
#include "types.h"
#include "io.h"
#include "stdio.h"
-#include "libfdt/libfdt.h"
+#include <libfdt.h>
BSS_STACK(4*1024);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:14 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:04 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:29 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:22 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
#
# LED drivers
#
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:57 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:47 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:05 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:49 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:50 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:07 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:52 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:08 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:09 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:10 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:11 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:58 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_ASP834x is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:13 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_ASP834x is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:14 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:15 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:16 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
CONFIG_KSI8560=y
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:04 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:07 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:09 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:10 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:12 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_GENERIC_TBSYNC=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-# CONFIG_IRQ_ALL_CPUS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:18 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:15 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:19 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:20 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-# Sat Oct 18 11:06:13 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:21 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_SOCRATES=y
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_OLD_DRIVERS is not set
-# CONFIG_CAN_SLCAN is not set
-CONFIG_CAN_SJA1000=y
-CONFIG_CAN_SJA1000_MEM_OF=y
-# CONFIG_CAN_EMS_PCI is not set
-# CONFIG_CAN_IXXAT_PCI is not set
-# CONFIG_CAN_PEAK_PCI is not set
-# CONFIG_CAN_KVASER_PCI is not set
-# CONFIG_CAN_MSCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
CONFIG_MTD_NAND_SOCRATES=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_TSC2003=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_SOCRATES=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
#
# Frame buffer hardware drivers
#
-CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_FSL_DIU is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
-CONFIG_RTC_DRV_RX8025=y
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PPC=y
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:22 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:19 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:24 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
+CONFIG_MTD_NAND_FSL_UPM=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-CONFIG_E1000=y
+# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:21 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:22 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:26 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Fri Mar 13 15:36:11 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:31 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Jan 28 23:05:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:29 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
CONFIG_GEF_SBC310=y
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:30 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8610=y
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC8641_HPCN=y
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:23 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:27 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
CONFIG_SBC8641D=y
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:50 2009
#
# CONFIG_PPC64 is not set
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:51 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_PPC_C2K=y
CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=m
CONFIG_GEN_RTC=m
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:52 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:53 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar 6 00:07:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:54 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:30 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
CONFIG_PPC_CHRP=y
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_RTAS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:32 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Feb 6 09:48:53 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon Apr 20 11:06:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
+CONFIG_PPC_MPC5200_GPIO=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MPC52xx_PSC=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:33 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:56 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_MPIC_WEIRD=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:57 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:36 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:58 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:37 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:40:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
CONFIG_KSI8560=y
-# CONFIG_STX_GP3 is not set
+CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_TQM8548=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
+CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_FSL_ULI1575=y
CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SERIAL_CPM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
+CONFIG_SERIAL_QE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_I2C_CPM is not set
+CONFIG_I2C_CPM=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:41:18 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
+CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
+CONFIG_KSI8560=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_SBC8548=y
+# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_MPC8xxx_GPIO=y
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_IRQ_ALL_CPUS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=131072
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_SATA_AHCI=y
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_PATA_ALI=y
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+CONFIG_FIXED_PHY=y
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_GIANFAR=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_NVRAM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=m
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported SDMC DM1105 Adapters
+#
+# CONFIG_DVB_DM1105 is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
CONFIG_NETDEV_1000=y
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC8641_HPCN=y
CONFIG_SBC8641D=y
CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
CONFIG_MPC8610=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:41 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:01 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:51 2008
+# Linux kernel version: 2.6.30-rc7
+# Mon May 25 14:53:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_ANSLCD is not set
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
+CONFIG_P54_LEDS=y
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:42 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:02 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:03 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_PRPMC2800=y
# CONFIG_PPC_C2K is not set
CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 09:28:45 2009
+# Linux kernel version: 2.6.30-rc5
+# Fri May 15 10:37:00 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
+CONFIG_HID_SONY=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PPC=m
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_PS3=m
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar 6 00:09:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:04 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
* allocate the space "normally" and use the cache management functions
* to ensure it is consistent.
*/
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t gfp);
extern void __dma_free_coherent(size_t size, void *vaddr);
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
* Cache coherent cores.
*/
-#define __dma_alloc_coherent(gfp, size, handle) NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
#define __dma_free_coherent(size, addr) ((void)0)
#define __dma_sync(addr, size, rw) ((void)0)
#define __dma_sync_page(pg, off, sz, rw) ((void)0)
# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
(exec_stk != EXSTACK_DISABLE_X) : 0)
#else
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+ set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
#endif /* __powerpc64__ */
extern int dcache_bsize;
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-extern unsigned long FIXADDR_TOP;
-
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <asm/page.h>
#include <asm/kmap_types.h>
#endif
+#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
+
/*
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
PPC_LONG "1b,4b,2b,4b\n" \
".previous" \
: "=&r" (oldval), "=&r" (ret) \
- : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+ : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
: "cr0", "memory")
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
struct device_node;
struct iommu_table;
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
- struct device_node *dn);
-
/* Get table parameters from HV */
extern void iommu_table_getparms_iSeries(unsigned long busno,
unsigned char slotno, unsigned char virtbus,
*
*/
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
prop = of_get_property(np, "interrupts", NULL);
if (!prop)
continue;
- if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+ if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
count++;
}
return count;
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP PKMAP_BASE
+#else
+#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP KVIRT_TOP
+#endif
+
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
#define PPC_INST_STSWI 0x7c0005aa
#define PPC_INST_STSWX 0x7c00052a
-#define PPC_INST_TLBILX 0x7c000626
+#define PPC_INST_TLBILX 0x7c000024
#define PPC_INST_WAIT 0x7c00007c
/* macros to insert fields into opcodes */
#ifndef _ASM_POWERPC_PPC_ASM_H
#define _ASM_POWERPC_PPC_ASM_H
+#include <linux/init.h>
#include <linux/stringify.h>
#include <asm/asm-compat.h>
#include <asm/processor.h>
GLUE(.,name):
#define _INIT_GLOBAL(name) \
- .section ".text.init.refok"; \
+ __REF; \
.align 2 ; \
.globl name; \
.globl GLUE(.,name); \
GLUE(.,name):
#define _INIT_STATIC(name) \
- .section ".text.init.refok"; \
+ __REF; \
.align 2 ; \
.section ".opd","aw"; \
name: \
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
extern int init_bootmem_done; /* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
+extern phys_addr_t memory_limit;
extern unsigned long klimit;
extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power5+",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
{ /* Power6 */
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power6",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power6",
},
{ /* 2.06-compliant processor, i.e. Power7 "architected" mode */
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power7",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
.platform = "power7",
},
{ /* Power7 */
* and, in that case, keep the current value for
* oprofile_cpu_type.
*/
- if (old.oprofile_cpu_type == NULL)
- t->oprofile_cpu_type = s->oprofile_cpu_type;
+ if (old.oprofile_cpu_type != NULL) {
+ t->oprofile_cpu_type = old.oprofile_cpu_type;
+ t->oprofile_type = old.oprofile_type;
+ }
}
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
{
void *ret;
#ifdef CONFIG_NOT_COHERENT_CACHE
- ret = __dma_alloc_coherent(size, dma_handle, flag);
+ ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
*dma_handle += get_dma_direct_offset(dev);
* 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
*/
- pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+ pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
return -EFAULT;
}
- pr_debug(" %08x %08x", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
(int)((short)jmp[1]);
- pr_debug(" %x ", offset);
+ pr_devel(" %x ", offset);
/* get the address this jumps too */
tramp = mod->arch.toc + offset + 32;
- pr_debug("toc: %lx", tramp);
+ pr_devel("toc: %lx", tramp);
if (probe_kernel_read(jmp, (void *)tramp, 8)) {
printk(KERN_ERR "Failed to read %lx\n", tramp);
return -EFAULT;
}
- pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
* 0x4e, 0x80, 0x04, 0x20 bctr
*/
- pr_debug("ip:%lx jumps to %lx", ip, tramp);
+ pr_devel("ip:%lx jumps to %lx", ip, tramp);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
return -EFAULT;
}
- pr_debug(" %08x %08x ", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x ", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
if (tramp & 0x8000)
tramp -= 0x10000;
- pr_debug(" %lx ", tramp);
+ pr_devel(" %lx ", tramp);
if (tramp != addr) {
printk(KERN_ERR
/* ld r2,40(r1) */
op[1] = 0xe8410028;
- pr_debug("write to %lx\n", rec->ip);
+ pr_devel("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
return -EPERM;
return -EINVAL;
}
- pr_debug("write to %lx\n", rec->ip);
+ pr_devel("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
return -EPERM;
PPC_LONG "2b,4b\n"
".previous"
- : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
*
*/
+#include <linux/init.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
mtspr SPRN_DBAT##n##L,RB; \
1:
- .section .text.head, "ax"
+ __HEAD
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "head_32.S",N_SO,0,0,0f
0:
*
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
*
* This is all going to change RSN when we add bi_recs....... -- Dan
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
* option) any later version.
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
* r7 - End of kernel command line string
*
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
/*
*
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#else
#define DO_8xx_CPU6(val, reg)
#endif
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
* option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
* r7 - End of kernel command line string
*
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
/*
/* Crash kernel trumps memory limit */
if (memory_limit && memory_limit <= crashk_res.end) {
memory_limit = crashk_res.end + 1;
- printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
- memory_limit);
+ printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
+ (unsigned long long)memory_limit);
}
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
for_each_pci_dev(dev) {
pci_read_config_word(dev, PCI_COMMAND, &command);
- for (idx = 0; idx < 6; idx++) {
+ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
r = &dev->resource[idx];
if (r->parent) /* Already allocated */
continue;
if (!r->flags || (r->flags & IORESOURCE_UNSET))
continue; /* Not assigned at all */
+ /* We only allocate ROMs on pass 1 just in case they
+ * have been screwed up by firmware
+ */
+ if (idx == PCI_ROM_RESOURCE )
+ disabled = 1;
if (r->flags & IORESOURCE_IO)
disabled = !(command & PCI_COMMAND_IO);
else
if (pass)
continue;
r = &dev->resource[PCI_ROM_RESOURCE];
- if (r->flags & IORESOURCE_ROM_ENABLE) {
+ if (r->flags) {
/* Turn the ROM off, leave the resource region,
* but keep it unregistered.
*/
u32 reg;
- pr_debug("PCI: Switching off ROM of %s\n",
- pci_name(dev));
- r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_read_config_dword(dev, dev->rom_base_reg, ®);
- pci_write_config_dword(dev, dev->rom_base_reg,
- reg & ~PCI_ROM_ADDRESS_ENABLE);
+ if (reg & PCI_ROM_ADDRESS_ENABLE) {
+ pr_debug("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_write_config_dword(dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
}
}
}
return def;
}
-static unsigned int pci_parse_of_flags(u32 addr0)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
{
unsigned int flags = 0;
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
+ /* Note: We don't know whether the ROM has been left enabled
+ * by the firmware or not. We mark it as disabled (ie, we do
+ * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+ * do a config space read, it will be force-enabled if needed
+ */
+ if (!bridge && (addr0 & 0xff) == 0x30)
+ flags |= IORESOURCE_READONLY;
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+ if (flags)
+ flags |= IORESOURCE_SIZEALIGN;
return flags;
}
return;
pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
- flags = pci_parse_of_flags(addrs[0]);
+ flags = pci_parse_of_flags(addrs[0], 0);
if (!flags)
continue;
base = of_read_number(&addrs[1], 2);
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
- flags = pci_parse_of_flags(ranges[0]);
+ flags = pci_parse_of_flags(ranges[0], 1);
size = of_read_number(&ranges[6], 2);
if (flags == 0 || size == 0)
continue;
return 1;
memory_limit = PAGE_ALIGN(memparse(p, &p));
- DBG("memory limit = 0x%lx\n", memory_limit);
+ DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
return 0;
}
void __init early_init_devtree(void *params)
{
- unsigned long limit;
+ phys_addr_t limit;
DBG(" -> early_init_devtree(%p)\n", params);
limit = memory_limit;
if (! limit) {
- unsigned long memsize;
+ phys_addr_t memsize;
/* Ensure that total memory size is page-aligned, because
* otherwise mark_bootmem() gets upset. */
lmb_analyze();
lmb_dump_all();
- DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+ DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */
struct device_node *p;
const u32 *intspec, *tmp, *addr;
u32 intsize, intlen;
- int res;
+ int res = -EINVAL;
DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
/* Get size of interrupt specifier */
tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- of_node_put(p);
- return -EINVAL;
- }
+ if (tmp == NULL)
+ goto out;
intsize = *tmp;
DBG(" intsize=%d intlen=%d\n", intsize, intlen);
/* Check index */
if ((index + 1) * intsize > intlen)
- return -EINVAL;
+ goto out;
/* Get new specifier and map it */
res = of_irq_map_raw(p, intspec + index * intsize, intsize,
addr, out_irq);
+out:
of_node_put(p);
return res;
}
#include <linux/clockchips.h>
#include <linux/clocksource.h>
-static cycle_t rtc_read(void);
+static cycle_t rtc_read(struct clocksource *);
static struct clocksource clocksource_rtc = {
.name = "rtc",
.rating = 400,
.read = rtc_read,
};
-static cycle_t timebase_read(void);
+static cycle_t timebase_read(struct clocksource *);
static struct clocksource clocksource_timebase = {
.name = "timebase",
.rating = 400,
}
/* clocksource code */
-static cycle_t rtc_read(void)
+static cycle_t rtc_read(struct clocksource *cs)
{
return (cycle_t)get_rtc();
}
-static cycle_t timebase_read(void)
+static cycle_t timebase_read(struct clocksource *cs)
{
return (cycle_t)get_tb();
}
/* Text and gots */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
- *(.text.head)
+ HEAD_TEXT
_text = .;
- *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
+ /* careful! __ftr_alt_* sections need to be close to .text */
+ *(.text .fixup __ftr_alt_* .ref.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
*(.data.page_aligned)
}
+ . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
memcpy_64.o usercopy_64.o mem_64.o string.o
obj-$(CONFIG_XMON) += sstep.o
obj-$(CONFIG_KPROBES) += sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
+++ /dev/null
-/*
- * PowerPC version derived from arch/arm/mm/consistent.c
- * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- * Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators. Used for DMA devices that want to
- * share uncached memory with the processor core. The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- * -- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
- struct page *page;
- unsigned long order;
- int i;
- unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
- unsigned int array_size = nr_pages * sizeof(struct page *);
- struct page **pages;
- struct page *end;
- u64 mask = 0x00ffffff, limit; /* ISA default */
- struct vm_struct *area;
-
- BUG_ON(!mem_init_done);
- size = PAGE_ALIGN(size);
- limit = (mask + 1) & ~mask;
- if (limit && size >= limit) {
- printk(KERN_WARNING "coherent allocation too big (requested "
- "%#x mask %#Lx)\n", size, mask);
- return NULL;
- }
-
- order = get_order(size);
-
- if (mask != 0xffffffff)
- gfp |= GFP_DMA;
-
- page = alloc_pages(gfp, order);
- if (!page)
- goto no_page;
-
- end = page + (1 << order);
-
- /*
- * Invalidate any data that might be lurking in the
- * kernel direct-mapped region for device DMA.
- */
- {
- unsigned long kaddr = (unsigned long)page_address(page);
- memset(page_address(page), 0, size);
- flush_dcache_range(kaddr, kaddr + size);
- }
-
- split_page(page, order);
-
- /*
- * Set the "dma handle"
- */
- *handle = page_to_phys(page);
-
- area = get_vm_area_caller(size, VM_IOREMAP,
- __builtin_return_address(1));
- if (!area)
- goto out_free_pages;
-
- if (array_size > PAGE_SIZE) {
- pages = vmalloc(array_size);
- area->flags |= VM_VPAGES;
- } else {
- pages = kmalloc(array_size, GFP_KERNEL);
- }
- if (!pages)
- goto out_free_area;
-
- area->pages = pages;
- area->nr_pages = nr_pages;
-
- for (i = 0; i < nr_pages; i++)
- pages[i] = page + i;
-
- if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
- goto out_unmap;
-
- /*
- * Free the otherwise unused pages.
- */
- page += nr_pages;
- while (page < end) {
- __free_page(page);
- page++;
- }
-
- return area->addr;
-out_unmap:
- vunmap(area->addr);
- if (array_size > PAGE_SIZE)
- vfree(pages);
- else
- kfree(pages);
- goto out_free_pages;
-out_free_area:
- free_vm_area(area);
-out_free_pages:
- if (page)
- __free_pages(page, order);
-no_page:
- return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
- vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
- unsigned long start = (unsigned long)vaddr;
- unsigned long end = start + size;
-
- switch (direction) {
- case DMA_NONE:
- BUG();
- case DMA_FROM_DEVICE:
- /*
- * invalidate only when cache-line aligned otherwise there is
- * the potential for discarding uncommitted data from the cache
- */
- if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
- flush_dcache_range(start, end);
- else
- invalidate_dcache_range(start, end);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- clean_dcache_range(start, end);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- flush_dcache_range(start, end);
- break;
- }
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
- size_t cur_size = seg_size;
- unsigned long flags, start, seg_offset = offset;
- int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
- int seg_nr = 0;
-
- local_irq_save(flags);
-
- do {
- start = (unsigned long)kmap_atomic(page + seg_nr,
- KM_PPC_SYNC_PAGE) + seg_offset;
-
- /* Sync this buffer segment */
- __dma_sync((void *)start, seg_size, direction);
- kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
- seg_nr++;
-
- /* Calculate next buffer segment size */
- seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
- /* Add the segment size to our running total */
- cur_size += seg_size;
- seg_offset = 0;
- } while (seg_nr < nr_segs);
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
- __dma_sync_page_highmem(page, offset, size, direction);
-#else
- unsigned long start = (unsigned long)page_address(page) + offset;
- __dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
--- /dev/null
+/*
+ * PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core. The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ * -- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE (IOREMAP_TOP)
+#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vm_region region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ * struct vm_region vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct ppc_vm_region *c, *new;
+
+ new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+ struct ppc_vm_region *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ struct page *page;
+ struct ppc_vm_region *c;
+ unsigned long order;
+ u64 mask = ISA_DMA_THRESHOLD, limit;
+
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ goto no_page;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ goto no_page;
+ }
+ }
+
+
+ size = PAGE_ALIGN(size);
+ limit = (mask + 1) & ~mask;
+ if ((limit && size >= limit) ||
+ size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+ printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+ size, mask);
+ return NULL;
+ }
+
+ order = get_order(size);
+
+ /* Might be useful if we ever have a real legacy DMA zone... */
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+
+ page = alloc_pages(gfp, order);
+ if (!page)
+ goto no_page;
+
+ /*
+ * Invalidate any data that might be lurking in the
+ * kernel direct-mapped region for device DMA.
+ */
+ {
+ unsigned long kaddr = (unsigned long)page_address(page);
+ memset(page_address(page), 0, size);
+ flush_dcache_range(kaddr, kaddr + size);
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = ppc_vm_region_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ unsigned long vaddr = c->vm_start;
+ struct page *end = page + (1 << order);
+
+ split_page(page, order);
+
+ /*
+ * Set the "dma handle"
+ */
+ *handle = page_to_phys(page);
+
+ do {
+ SetPageReserved(page);
+ map_page(vaddr, page_to_phys(page),
+ pgprot_noncached(PAGE_KERNEL));
+ page++;
+ vaddr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ /*
+ * Free the otherwise unused pages.
+ */
+ while (page < end) {
+ __free_page(page);
+ page++;
+ }
+
+ return (void *)c->vm_start;
+ }
+
+ if (page)
+ __free_pages(page, order);
+ no_page:
+ return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+ struct ppc_vm_region *c;
+ unsigned long flags, addr;
+
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+ if (!c)
+ goto no_area;
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ addr = c->vm_start;
+ do {
+ pte_t *ptep;
+ unsigned long pfn;
+
+ ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+ addr),
+ addr),
+ addr);
+ if (!pte_none(*ptep) && pte_present(*ptep)) {
+ pfn = pte_pfn(*ptep);
+ pte_clear(&init_mm, addr, ptep);
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ __free_page(page);
+ }
+ }
+ addr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ list_del(&c->vm_list);
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
+ kfree(c);
+ return;
+
+ no_area:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, vaddr);
+ dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+ unsigned long start = (unsigned long)vaddr;
+ unsigned long end = start + size;
+
+ switch (direction) {
+ case DMA_NONE:
+ BUG();
+ case DMA_FROM_DEVICE:
+ /*
+ * invalidate only when cache-line aligned otherwise there is
+ * the potential for discarding uncommitted data from the cache
+ */
+ if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+ flush_dcache_range(start, end);
+ else
+ invalidate_dcache_range(start, end);
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ clean_dcache_range(start, end);
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ flush_dcache_range(start, end);
+ break;
+ }
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+ size_t cur_size = seg_size;
+ unsigned long flags, start, seg_offset = offset;
+ int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+ int seg_nr = 0;
+
+ local_irq_save(flags);
+
+ do {
+ start = (unsigned long)kmap_atomic(page + seg_nr,
+ KM_PPC_SYNC_PAGE) + seg_offset;
+
+ /* Sync this buffer segment */
+ __dma_sync((void *)start, seg_size, direction);
+ kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+ seg_nr++;
+
+ /* Calculate next buffer segment size */
+ seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+ /* Add the segment size to our running total */
+ cur_size += seg_size;
+ seg_offset = 0;
+ } while (seg_nr < nr_segs);
+
+ local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+ __dma_sync_page_highmem(page, offset, size, direction);
+#else
+ unsigned long start = (unsigned long)page_address(page) + offset;
+ __dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);
}
#ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
{
/* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR))
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
-#ifdef CONFIG_HIGHMEM
- ioremap_base = PKMAP_BASE;
-#else
- ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
- ioremap_bot = ioremap_base;
+ /* Initialize early top-down ioremap allocator */
+ ioremap_bot = IOREMAP_TOP;
/* Map in I/O resources */
if (ppc_md.progress)
int init_bootmem_done;
int mem_init_done;
-unsigned long memory_limit;
+phys_addr_t memory_limit;
#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
bsssize >> 10,
initsize >> 10);
+#ifdef CONFIG_PPC32
+ pr_info("Kernel virtual memory layout:\n");
+ pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+ pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
+ PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ pr_info(" * 0x%08lx..0x%08lx : consistent mem\n",
+ IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+ pr_info(" * 0x%08lx..0x%08lx : early ioremap\n",
+ ioremap_bot, IOREMAP_TOP);
+ pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n",
+ VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
mem_init_done = 1;
}
pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
- /* Mark this mm has having no context anymore */
- mm->context.id = MMU_NO_CONTEXT;
-
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
+ /* Mark this mm has having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
__clear_bit(id, stale_map[cpu]);
entry = do_dcache_icache_coherency(entry);
changed = !pte_same(*(ptep), entry);
if (changed) {
- assert_pte_locked(vma->vm_mm, address);
+ if (!(vma->vm_flags & VM_HUGETLB))
+ assert_pte_locked(vma->vm_mm, address);
__ptep_set_access_flags(ptep, entry);
flush_tlb_page_nohash(vma, address);
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t cpu_mask;
unsigned int pid;
preempt_disable();
isync
1: wrtee r10
blr
-#elif
+#else
#error Unsupported processor type !
#endif
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
+static int use_slot_nums;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
else
mmcr0_val |= MMCR0_PROBLEM_DISABLE;
+ if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+ __is_processor(PV_970) || __is_processor(PV_970FX) ||
+ __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+ __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+ use_slot_nums = 1;
+
return 0;
}
mmcra = mfspr(SPRN_MMCRA);
- if (mmcra & MMCRA_SAMPLE_ENABLE) {
+ if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
if (slot > 1)
pc += 4 * (slot - 1);
config XILINX_VIRTEX
bool
+ select DEFAULT_UIMAGE
config XILINX_VIRTEX_II_PRO
bool
# Xilinx specific config options.
config XILINX_VIRTEX
bool
+ select DEFAULT_UIMAGE
# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
config XILINX_VIRTEX_5_FXT
config PPC_CELL_NATIVE
bool
select PPC_CELL_COMMON
- select PPC_OF_PLATFORM_PCI
select MPIC
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
bool "IBM Cell Blade"
depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
+ select PPC_OF_PLATFORM_PCI
+ select PCI
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
+ select PPC_OF_PLATFORM_PCI
+ select PCI
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
select USB_OHCI_BIG_ENDIAN_MMIO
area->nid = nid;
area->order = order;
- area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+ area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
+ area->order);
- if (!area->pages)
+ if (!area->pages) {
+ printk(KERN_WARNING "%s: no page on node %d\n",
+ __func__, area->nid);
goto out_free_area;
+ }
- addr = __pa(page_address(area->pages));
+ /*
+ * We move the ptcal area to the middle of the allocated
+ * page, in order to avoid prefetches in memcpy and similar
+ * functions stepping on it.
+ */
+ addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1);
+ printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n",
+ __func__, area->nid, addr);
ret = -EIO;
if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
if (!machine_is(mpc86xx_hpcd))
return;
- /* Interrupt Disable, Needed when SATA disabled */
- pci_read_config_word(dev, PCI_COMMAND, &temp);
- temp |= 1<<10;
- pci_write_config_word(dev, PCI_COMMAND, temp);
-
pci_read_config_byte(dev, 0x83, &c);
c |= 0x80;
pci_write_config_byte(dev, 0x83, c);
config VIOCD
tristate "iSeries Virtual I/O CD support"
+ depends on BLOCK
select VIOPATH
help
If you are running Linux on an IBM iSeries system and you want to
}
-void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
+static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
{
struct iommu_table *tbl;
+ struct device_node *dn = pdev->sysdata;
struct pci_dn *pdn = PCI_DN(dn);
const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
kfree(tbl);
pdev->dev.archdata.dma_data = pdn->iommu_table;
}
+#else
+#define pci_dma_dev_setup_iseries NULL
#endif
static struct iommu_table veth_iommu_table;
ppc_md.tce_build = tce_build_iSeries;
ppc_md.tce_free = tce_free_iSeries;
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries;
set_pci_dma_ops(&dma_iommu_ops);
}
pdev->sysdata = node;
allocate_device_bars(pdev);
iseries_device_information(pdev, bus, *sub_bus);
- iommu_devnode_init_iSeries(pdev, node);
}
/*
}
return irq;
}
+
+static void __devinit quirk_ipr_msi(struct pci_dev *dev)
+{
+ /* Something prevents MSIs from the IPR from working on Bimini,
+ * and the driver has no smarts to recover. So disable MSI
+ * on it for now. */
+
+ if (machine_is(maple)) {
+ dev->no_msi = 1;
+ dev_info(&dev->dev, "Quirk disabled MSI\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+ quirk_ipr_msi);
#include "pasemi.h"
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
/* SDC reset register, must be pre-mapped at reset time */
static void __iomem *reset_reg;
*
*/
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
{
int result;
int file;
DEFINE_MUTEX(ps3_gpu_mutex);
EXPORT_SYMBOL_GPL(ps3_gpu_mutex);
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
static union ps3_firmware_version ps3_firmware_version;
void ps3_get_firmware_version(union ps3_firmware_version *v)
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/firmware.h>
#include "plpar_wrappers.h"
if (!driver)
return;
+ dev->error_state = pci_channel_io_normal;
+
eeh_enable_irq(dev);
if (!driver->err_handler ||
lpar_xirr_info_set((0xff << 24) | irq);
}
-static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
+static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
{
unsigned int irq;
int status;
irq = (unsigned int)irq_map[virq].hwirq;
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
- return;
+ return -1;
status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
if (status) {
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
__func__, irq, status);
- return;
+ return -1;
}
/*
printk(KERN_WARNING
"%s: No online cpus in the mask %s for irq %d\n",
__func__, cpulist, virq);
- return;
+ return -1;
}
status = rtas_call(ibm_set_xive, 3, 1, NULL,
if (status) {
printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
__func__, irq, status);
- return;
+ return -1;
}
+
+ return 0;
}
static struct irq_chip xics_pic_direct = {
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
};
struct rio_priv {
+ struct device *dev;
void __iomem *regs_win;
struct rio_atmu_regs __iomem *atmu_regs;
struct rio_atmu_regs __iomem *maint_atmu_regs;
for (i = 0; i < priv->msg_tx_ring.size; i++) {
priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
if (!priv->msg_tx_ring.virt_buffer[i]) {
rc = -ENOMEM;
for (j = 0; j < priv->msg_tx_ring.size; j++)
if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(NULL,
+ dma_free_coherent(priv->dev,
RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.
virt_buffer[j],
}
/* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
&priv->msg_tx_ring.phys, GFP_KERNEL);
if (!priv->msg_tx_ring.virt) {
return rc;
out_irq:
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
&priv->msg_rx_ring.phys, GFP_KERNEL);
if (!priv->msg_rx_ring.virt) {
rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport);
if (rc < 0) {
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
goto out;
out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
}
/* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+ priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
if (!priv->dbell_ring.virt) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
"dbell_rx", (void *)mport);
if (rc < 0) {
iounmap(priv->dbell_win);
- dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+ dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
priv->dbell_ring.virt, priv->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
strcpy(port->name, "RIO0 mport");
+ priv->dev = &dev->dev;
+
port->ops = ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
- struct resource r;
- struct device_node *np;
- struct platform_device *dev;
- u32 freq = fsl_get_sys_freq();
- int ret;
-
- np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
- if (!np) {
- ret = -ENODEV;
- goto nodev;
- }
-
- memset(&r, 0, sizeof(r));
-
- ret = of_address_to_resource(np, 0, &r);
- if (ret)
- goto err;
-
- dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
- if (IS_ERR(dev)) {
- ret = PTR_ERR(dev);
- goto err;
- }
-
- ret = platform_device_add_data(dev, &freq, sizeof(freq));
- if (ret)
- goto unreg;
-
- of_node_put(np);
- return 0;
-
-unreg:
- platform_device_unregister(dev);
-err:
- of_node_put(np);
-nodev:
- return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
if (!phy_type)
#endif /* CONFIG_SMP */
-void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
mpic_physmask(cpus_addr(tmp)[0]));
}
+
+ return 0;
}
static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
memset(mpic, 0, sizeof(struct mpic));
mpic->name = name;
- mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- isu_size, &mpic_host_ops,
- flags & MPIC_LARGE_VECTORS ? 2048 : 256);
- if (mpic->irqhost == NULL)
- return NULL;
-
- mpic->irqhost->host_data = mpic;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.typename = name;
if (flags & MPIC_PRIMARY)
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
+ mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+ isu_size ? isu_size : mpic->num_sources,
+ &mpic_host_ops,
+ flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+ if (mpic->irqhost == NULL)
+ return NULL;
+
+ mpic->irqhost->host_data = mpic;
+
/* Display version */
switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
extern void mpic_set_vector(unsigned int virq, unsigned int vector);
-extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
#endif /* _POWERPC_SYSDEV_MPIC_H */
static struct irq_host *master_irqhost;
+#define XILINX_INTC_MAXIRQS (32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_LEVEL_LOW,
+};
+
/*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
*/
static void xilinx_intc_mask(unsigned int virq)
{
out_be32(regs + XINTC_CIE, 1 << irq);
}
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+ struct irq_desc *desc = get_irq_desc(virq);
+
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+ return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
+
+ /* ack level irqs because they can't be acked during
+ * ack function since the handle_level_irq function
+ * acks the irq before calling the inerrupt handler
+ */
+ out_be32(regs + XINTC_IAR, 1 << irq);
}
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+ .typename = "Xilinx Level INTC",
+ .mask = xilinx_intc_mask,
+ .mask_ack = xilinx_intc_mask,
+ .unmask = xilinx_intc_level_unmask,
+ .set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void *regs = get_irq_chip_data(virq);
+ pr_debug("unmask: %d\n", irq);
+ out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
out_be32(regs + XINTC_IAR, 1 << irq);
}
-static struct irq_chip xilinx_intc_irqchip = {
- .typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+ .typename = "Xilinx Edge INTC",
.mask = xilinx_intc_mask,
- .unmask = xilinx_intc_unmask,
- .ack = xilinx_intc_ack,
+ .unmask = xilinx_intc_edge_unmask,
+ .ack = xilinx_intc_edge_ack,
+ .set_type = xilinx_intc_set_type,
};
/*
* IRQ Host operations
*/
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+{
+ if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+ return -EINVAL;
+
+ /* keep a copy of the interrupt type til the interrupt is mapped
+ */
+ xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+ /* Xilinx uses 2 interrupt entries, the 1st being the h/w
+ * interrupt number, the 2nd being the interrupt type, edge or level
+ */
+ *out_hwirq = intspec[0];
+ *out_flags = xilinx_intc_map_senses[intspec[1]];
+
+ return 0;
+}
static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t irq)
{
set_irq_chip_data(virq, h->host_data);
- set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
- set_irq_type(virq, IRQ_TYPE_NONE);
+
+ if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+ xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+ set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+ handle_level_irq);
+ } else {
+ set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+ handle_edge_irq);
+ }
return 0;
}
static struct irq_host_ops xilinx_intc_ops = {
.map = xilinx_intc_map,
+ .xlate = xilinx_intc_xlate,
};
struct irq_host * __init
out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
/* Allocate and initialize an irq_host structure. */
- irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+ irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+ &xilinx_intc_ops, -1);
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
irq->host_data = regs;
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_SYSCALL_WRAPPERS
select HAVE_FUNCTION_TRACER
+ select HAVE_DEFAULT_NO_SPIN_MUTEXES
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KRETPROBES
/*
* Ops list
*/
-static DEFINE_SPINLOCK(appldata_ops_lock);
+static DEFINE_MUTEX(appldata_ops_mutex);
static LIST_HEAD(appldata_ops_list);
i = 0;
get_online_cpus();
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
if (ops->active == 1) {
ops->callback(ops->data);
}
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
put_online_cpus();
}
struct vtimer_list *timer;
u64 expires;
} *args = p;
- mod_virt_timer(args->timer, args->expires);
+ mod_virt_timer_periodic(args->timer, args->expires);
}
#define APPLDATA_ADD_TIMER 0
struct list_head *lh;
found = 0;
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
if (&tmp_ops->ctl_table[2] == ctl) {
}
}
if (!found) {
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
return -ENODEV;
}
ops = ctl->data;
if (!try_module_get(ops->owner)) { // protect this function
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
return -ENODEV;
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
if (!*lenp || *ppos) {
*lenp = 0;
return -EFAULT;
}
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
if ((buf[0] == '1') && (ops->active == 0)) {
// protect work queue callback
if (!try_module_get(ops->owner)) {
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
module_put(ops->owner);
return -ENODEV;
}
"failed with rc=%d\n", ops->name, rc);
module_put(ops->owner);
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
out:
*lenp = len;
*ppos += len;
if (!ops->ctl_table)
return -ENOMEM;
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_add(&ops->list, &appldata_ops_list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
ops->ctl_table[0].procname = appldata_proc_name;
ops->ctl_table[0].maxlen = 0;
goto out;
return 0;
out:
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_del(&ops->list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
kfree(ops->ctl_table);
return -ENOMEM;
}
*/
void appldata_unregister_ops(struct appldata_ops *ops)
{
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_del(&ops->list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
unregister_sysctl_table(ops->sysctl_header);
kfree(ops->ctl_table);
}
{
/*
* don't put large structures on the stack, we are
- * serialized through the appldata_ops_lock and can use static
+ * serialized through the appldata_ops_mutex and can use static
*/
static struct sysinfo val;
unsigned long ev[NR_VM_EVENT_ITEMS];
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Wed Feb 11 10:07:16 2009
+# Linux kernel version: 2.6.30-rc3
+# Thu Apr 23 09:29:52 2009
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_PGSTE=y
CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_S390=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# I/O subsystem configuration
#
-CONFIG_MACHCHK_WARNING=y
CONFIG_QDIO=y
CONFIG_CHSC_SCH=m
CONFIG_KEXEC=y
# CONFIG_ZFCPDUMP is not set
CONFIG_S390_GUEST=y
+CONFIG_SECCOMP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_AUXDISPLAY is not set
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_EXOFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_AES_S390 is not set
CONFIG_S390_PRNG=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_NLATTR=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
--- /dev/null
+/*
+ * Copyright IBM Corp. 2000,2009
+ * Author(s): Hartmut Penner <hp@de.ibm.com>,
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+typedef struct
+{
+ unsigned int version : 8;
+ unsigned int ident : 24;
+ unsigned int machine : 16;
+ unsigned int unused : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */
return __div(cputime, 4096000000ULL / USER_HZ);
}
+cputime64_t s390_get_idle_time(int cpu);
+
+#define arch_idle_time(cpu) s390_get_idle_time(cpu)
+
#endif /* _S390_CPUTIME_H */
#define ASM_KVM_HOST_H
#include <linux/kvm_host.h>
#include <asm/debug.h>
+#include <asm/cpuid.h>
#define KVM_MAX_VCPUS 64
#define KVM_MEMORY_SLOTS 32
#define __LC_USER_EXEC_ASCE 0x02ac
#define __LC_CPUID 0x02b0
#define __LC_INT_CLOCK 0x02c8
+#define __LC_MACHINE_FLAGS 0x02d8
#define __LC_IRB 0x0300
#define __LC_PFAULT_INTPARM 0x0080
#define __LC_CPU_TIMER_SAVE_AREA 0x00d8
#define __LC_CPUID 0x0320
#define __LC_INT_CLOCK 0x0340
#define __LC_VDSO_PER_CPU 0x0350
+#define __LC_MACHINE_FLAGS 0x0358
#define __LC_IRB 0x0380
#define __LC_PASTE 0x03c0
#define __LC_PFAULT_INTPARM 0x11b8
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
#include <linux/types.h>
-#include <asm/sigp.h>
void restart_int_handler(void);
void ext_int_handler(void);
__u32 ext_call_fast; /* 0x02c4 */
__u64 int_clock; /* 0x02c8 */
__u64 clock_comparator; /* 0x02d0 */
- __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */
+ __u32 machine_flags; /* 0x02d8 */
+ __u8 pad_0x02dc[0x0300-0x02dc]; /* 0x02dc */
/* Interrupt response block */
__u8 irb[64]; /* 0x0300 */
__u64 int_clock; /* 0x0340 */
__u64 clock_comparator; /* 0x0348 */
__u64 vdso_per_cpu_data; /* 0x0350 */
- __u8 pad_0x0358[0x0380-0x0358]; /* 0x0358 */
+ __u64 machine_flags; /* 0x0358 */
+ __u8 pad_0x0360[0x0380-0x0360]; /* 0x0360 */
/* Interrupt response block. */
__u8 irb[64]; /* 0x0380 */
#define __ASM_S390_PROCESSOR_H
#include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
#include <asm/ptrace.h>
+#include <asm/setup.h>
#ifdef __KERNEL__
/*
*/
#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-typedef struct
-{
- unsigned int version : 8;
- unsigned int ident : 24;
- unsigned int machine : 16;
- unsigned int unused : 16;
-} __attribute__ ((packed)) cpuid_t;
-
static inline void get_cpu_id(cpuid_t *ptr)
{
asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
#ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
/*
* The pt_regs struct defines the way the registers are stored on
#ifdef __KERNEL__
+#include <asm/lowcore.h>
#include <asm/types.h>
#define PARMAREA 0x10400
/*
* Machine features detected in head.S
*/
-extern unsigned long machine_flags;
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
#define MACHINE_FLAG_HPAGE (1UL << 10)
#define MACHINE_FLAG_PFMF (1UL << 11)
-#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C)
+#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
#ifndef __s390x__
-#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IEEE (S390_lowcore.machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP (S390_lowcore.machine_flags & MACHINE_FLAG_CSP)
#define MACHINE_HAS_IDTE (0)
#define MACHINE_HAS_DIAG44 (1)
-#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVPG (S390_lowcore.machine_flags & MACHINE_FLAG_MVPG)
#define MACHINE_HAS_MVCOS (0)
#define MACHINE_HAS_HPAGE (0)
#define MACHINE_HAS_PFMF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
-#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
#define MACHINE_HAS_MVPG (1)
-#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_MVCOS (S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE (S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
#define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER)
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
#include <asm/lowcore.h>
+#include <asm/page.h>
+#include <asm/processor.h>
/*
* low level task data that entry.S needs immediate access to
extern void add_virt_timer(void *new);
extern void add_virt_timer_periodic(void *new);
extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires);
extern int del_virt_timer(struct vtimer_list *timer);
extern void init_cpu_vtimer(void);
#ifndef _ASM_S390_TIMEX_H
#define _ASM_S390_TIMEX_H
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
/* Inline functions for clock register access. */
static inline int set_clock(__u64 time)
{
void init_cpu_timer(void);
unsigned long long monotonic_clock(void);
+extern u64 sched_clock_base_cc;
+
#endif
#define __NR_pipe2 325
#define __NR_dup3 326
#define __NR_epoll_create1 327
-#define NR_syscalls 328
+#define __NR_preadv 328
+#define __NR_pwritev 329
+#define NR_syscalls 330
/*
* There are some system calls that are not present on 64 bit, some
DEFINE(__TI_flags, offsetof(struct thread_info, flags));
DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
+ DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
+ DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
BLANK();
DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
struct stat64_emu31 __user* statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
+ int error;
- if (!error)
- error = cp_stat64(statbuf, &stat);
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_stat64(statbuf, &stat);
}
/*
llgfr %r5,%r5 # u32
llgfr %r6,%r6 # u32
jg compat_sys_keyctl # branch to system call
+
+ .globl compat_sys_preadv_wrapper
+compat_sys_preadv_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ llgtr %r3,%r3 # compat_iovec *
+ llgfr %r4,%r4 # unsigned long
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_preadv # branch to system call
+
+ .globl compat_sys_pwritev_wrapper
+compat_sys_pwritev_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ llgtr %r3,%r3 # compat_iovec *
+ llgfr %r4,%r4 # unsigned long
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_pwritev # branch to system call
char kernel_nss_name[NSS_NAME_SIZE + 1];
+static unsigned long machine_flags;
+
static void __init setup_boot_command_line(void);
+/*
+ * Get the TOD clock running.
+ */
+static void __init reset_tod_clock(void)
+{
+ u64 time;
+
+ if (store_clock(&time) == 0)
+ return;
+ /* TOD clock not running. Set the clock to Unix Epoch. */
+ if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+ disabled_wait(0);
+
+ sched_clock_base_cc = TOD_UNIX_EPOCH;
+}
#ifdef CONFIG_SHARED_KERNEL
int __init savesys_ipl_nss(char *cmd, const int cmdlen);
*/
void __init startup_init(void)
{
+ reset_tod_clock();
ipl_save_parameters();
rescue_initrd();
clear_bss_section();
setup_hpage();
sclp_facilities_detect();
detect_memory_layout(memory_chunk);
+ S390_lowcore.machine_flags = machine_flags;
lockdep_on();
}
__CPUINIT
.globl restart_int_handler
restart_int_handler:
+ basr %r1,0
+restart_base:
+ spt restart_vtime-restart_base(%r1)
+ stck __LC_LAST_UPDATE_CLOCK
+ mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+ mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
l %r15,__LC_SAVE_AREA+60 # load ksp
lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
lam %a0,%a15,__LC_AREGS_SAVE_AREA
lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone
+ l %r1,__LC_THREAD_INFO
+ mvc __LC_USER_TIMER(8),__TI_user_timer(%r1)
+ mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+ xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
basr %r14,0
l %r14,restart_addr-.(%r14)
br %r14 # branch to start_secondary
restart_addr:
.long start_secondary
+ .align 8
+restart_vtime:
+ .long 0x7fffffff,0xffffffff
.previous
#else
/*
__CPUINIT
.globl restart_int_handler
restart_int_handler:
+ basr %r1,0
+restart_base:
+ spt restart_vtime-restart_base(%r1)
+ stck __LC_LAST_UPDATE_CLOCK
+ mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+ mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
lg %r15,__LC_SAVE_AREA+120 # load ksp
lghi %r10,__LC_CREGS_SAVE_AREA
lctlg %c0,%c15,0(%r10) # get new ctl regs
lghi %r10,__LC_AREGS_SAVE_AREA
lam %a0,%a15,0(%r10)
lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone
+ lg %r1,__LC_THREAD_INFO
+ mvc __LC_USER_TIMER(8),__TI_user_timer(%r1)
+ mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+ xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
jg start_secondary
+ .align 8
+restart_vtime:
+ .long 0x7fffffff,0xffffffff
.previous
#else
/*
*
*/
+#include <linux/init.h>
#include <asm/setup.h>
#include <asm/lowcore.h>
#include <asm/asm-offsets.h>
#define ARCH_OFFSET 0
#endif
-.section ".text.head","ax"
+__HEAD
#ifndef CONFIG_IPL
.org 0
.long 0x00080000,0x80000000+startup # Just a restart PSW
.LPG0:
xc 0x200(256),0x200 # partially clear lowcore
xc 0x300(256),0x300
-
+ l %r1,5f-.LPG0(%r13)
+ stck 0(%r1)
+ spt 6f-.LPG0(%r13)
+ mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1)
+ mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
+ mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13)
#ifndef CONFIG_MARCH_G5
# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
stidp __LC_CPUID # store cpuid
brct %r0,0b
#endif
- l %r13,0f-.LPG0(%r13)
+ l %r13,4f-.LPG0(%r13)
b 0(%r13)
-0: .long startup_continue
+ .align 4
+4: .long startup_continue
+5: .long sched_clock_base_cc
+ .align 8
+6: .long 0x7fffffff,0xffffffff
#
# params at 10400 (setup.h)
#include <asm/ebcdic.h>
#include <asm/reset.h>
#include <asm/sclp.h>
+#include <asm/sigp.h>
#include <asm/checksum.h>
#define IPL_PARM_BLOCK_VERSION 0
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/hardirq.h>
#include <linux/time.h>
#include <linux/module.h>
#include <asm/lowcore.h>
struct mci *mci;
int umode;
- lockdep_off();
+ nmi_enter();
s390_idle_check();
mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
mcck->warning = 1;
set_thread_flag(TIF_MCCK_PENDING);
}
- lockdep_on();
+ nmi_exit();
}
static int __init machine_check_init(void)
unsigned int console_irq = -1;
EXPORT_SYMBOL(console_irq);
-unsigned long machine_flags;
-EXPORT_SYMBOL(machine_flags);
-
unsigned long elf_hwcap = 0;
char elf_platform[ELF_PLATFORM_SIZE];
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
lc->current_task = (unsigned long) init_thread_union.thread_info.task;
lc->thread_info = (unsigned long) &init_thread_union;
+ lc->machine_flags = S390_lowcore.machine_flags;
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE) {
lc->extended_save_area_addr = (__u32)
#else
lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
#endif
+ lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
+ lc->async_enter_timer = S390_lowcore.async_enter_timer;
+ lc->exit_timer = S390_lowcore.exit_timer;
+ lc->user_timer = S390_lowcore.user_timer;
+ lc->system_timer = S390_lowcore.system_timer;
+ lc->steal_timer = S390_lowcore.steal_timer;
+ lc->last_update_timer = S390_lowcore.last_update_timer;
+ lc->last_update_clock = S390_lowcore.last_update_clock;
set_prefix((u32)(unsigned long) lc);
lowcore_ptr[0] = lc;
}
cpu_lowcore->current_task = (unsigned long) idle;
cpu_lowcore->cpu_nr = cpu;
cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+ cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
eieio();
while (signal_processor(cpu, sigp_restart) == sigp_busy)
int pcpus, cpu;
pcpus = simple_strtoul(s, NULL, 0);
- for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+ init_cpu_possible(cpumask_of(0));
+ for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
set_cpu_possible(cpu, true);
return 0;
}
SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
+SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
+SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
#define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
-/* The value of the TOD clock for 1.1.1970. */
-#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
-
/*
* Create a small time difference between the timer interrupts
* on the different cpus to avoid lock contention.
#define TICK_SIZE tick
+u64 sched_clock_base_cc = -1; /* Force to data section. */
+
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
static void etr_reset(void);
static void stp_reset(void);
-/*
- * Get the TOD clock running.
- */
-static u64 __init reset_tod_clock(void)
+unsigned long read_persistent_clock(void)
{
- u64 time;
-
- etr_reset();
- stp_reset();
- if (store_clock(&time) == 0)
- return time;
- /* TOD clock not running. Set the clock to Unix Epoch. */
- if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
- panic("TOD clock not operational.");
+ struct timespec ts;
- return TOD_UNIX_EPOCH;
+ tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
+ return ts.tv_sec;
}
-static cycle_t read_tod_clock(void)
+static cycle_t read_tod_clock(struct clocksource *cs)
{
return get_clock();
}
*/
void __init time_init(void)
{
- sched_clock_base_cc = reset_tod_clock();
+ struct timespec ts;
+ unsigned long flags;
+ cycle_t now;
- /* set xtime */
- tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ /* Reset time synchronization interfaces. */
+ etr_reset();
+ stp_reset();
/* request the clock comparator external interrupt */
if (register_early_external_interrupt(0x1004,
&ext_int_info_cc) != 0)
panic("Couldn't request external interrupt 0x1004");
- if (clocksource_register(&clocksource_tod) != 0)
- panic("Could not register TOD clock source");
-
/* request the timing alert external interrupt */
if (register_early_external_interrupt(0x1406,
timing_alert_interrupt,
&ext_int_etr_cc) != 0)
panic("Couldn't request external interrupt 0x1406");
+ if (clocksource_register(&clocksource_tod) != 0)
+ panic("Could not register TOD clock source");
+
+ /*
+ * The TOD clock is an accurate clock. The xtime should be
+ * initialized in a way that the difference between TOD and
+ * xtime is reasonably small. Too bad that timekeeping_init
+ * sets xtime.tv_nsec to zero. In addition the clock source
+ * change from the jiffies clock source to the TOD clock
+ * source add another error of up to 1/HZ second. The same
+ * function sets wall_to_monotonic to a value that is too
+ * small for /proc/uptime to be accurate.
+ * Reset xtime and wall_to_monotonic to sane values.
+ */
+ write_seqlock_irqsave(&xtime_lock, flags);
+ now = get_clock();
+ tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
+ clocksource_tod.cycle_last = now;
+ clocksource_tod.raw_time = xtime;
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
+ set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
/* Enable TOD clock interrupts on the boot cpu. */
init_cpu_timer();
+
/* Enable cpu timer interrupts on the boot cpu. */
vtime_init();
}
static void stp_work_fn(struct work_struct *work);
static DEFINE_MUTEX(stp_work_mutex);
static DECLARE_WORK(stp_work, stp_work_fn);
+static struct timer_list stp_timer;
static int __init early_parse_stp(char *p)
{
}
}
+static void stp_timeout(unsigned long dummy)
+{
+ queue_work(time_sync_wq, &stp_work);
+}
+
static int __init stp_init(void)
{
if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
return 0;
+ setup_timer(&stp_timer, stp_timeout, 0UL);
time_init_wq();
if (!stp_online)
return 0;
if (!stp_online) {
chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+ del_timer_sync(&stp_timer);
goto out_unlock;
}
stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
put_online_cpus();
+ if (!check_sync_clock())
+ /*
+ * There is a usable clock but the synchonization failed.
+ * Retry after a second.
+ */
+ mod_timer(&stp_timer, jiffies + HZ);
+
out_unlock:
mutex_unlock(&stp_work_mutex);
}
. = 0x00000000;
.text : {
_text = .; /* Text and read-only data */
- *(.text.head)
- TEXT_TEXT
+ HEAD_TEXT
+ TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
/* Account time spent with enabled wait psw loaded as idle time. */
idle_time = S390_lowcore.int_clock - idle->idle_enter;
account_idle_time(idle_time);
+ S390_lowcore.steal_timer +=
+ idle->idle_enter - S390_lowcore.last_update_clock;
S390_lowcore.last_update_clock = S390_lowcore.int_clock;
/* Account system time spent going idle. */
}
}
+cputime64_t s390_get_idle_time(int cpu)
+{
+ struct s390_idle_data *idle;
+ unsigned long long now, idle_time, idle_enter;
+
+ idle = &per_cpu(s390_idle, cpu);
+ spin_lock(&idle->lock);
+ now = get_clock();
+ idle_time = 0;
+ idle_enter = idle->idle_enter;
+ if (idle_enter != 0ULL && idle_enter < now)
+ idle_time = now - idle_enter;
+ spin_unlock(&idle->lock);
+ return idle_time;
+}
+
/*
* Sorted add to a list. List is linear searched until first bigger
* element is found.
}
EXPORT_SYMBOL(add_virt_timer_periodic);
-/*
- * If we change a pending timer the function must be called on the CPU
- * where the timer is running on, e.g. by smp_call_function_single()
- *
- * The original mod_timer adds the timer if it is not pending. For
- * compatibility we do the same. The timer will be added on the current
- * CPU as a oneshot timer.
- *
- * returns whether it has modified a pending timer (1) or not (0)
- */
-int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
{
struct vtimer_queue *vq;
unsigned long flags;
BUG_ON(!timer->function);
BUG_ON(!expires || expires > VTIMER_MAX_SLICE);
- /*
- * This is a common optimization triggered by the
- * networking code - if the timer is re-modified
- * to be the same thing then just return:
- */
if (timer->expires == expires && vtimer_pending(timer))
return 1;
cpu = get_cpu();
vq = &per_cpu(virt_cpu_timer, cpu);
- /* check if we run on the right CPU */
- BUG_ON(timer->cpu != cpu);
-
/* disable interrupts before test if timer is pending */
spin_lock_irqsave(&vq->lock, flags);
/* if timer isn't pending add it on the current CPU */
if (!vtimer_pending(timer)) {
spin_unlock_irqrestore(&vq->lock, flags);
- /* we do not activate an interval timer with mod_virt_timer */
- timer->interval = 0;
+
+ if (periodic)
+ timer->interval = expires;
+ else
+ timer->interval = 0;
timer->expires = expires;
timer->cpu = cpu;
internal_add_vtimer(timer);
return 0;
}
+ /* check if we run on the right CPU */
+ BUG_ON(timer->cpu != cpu);
+
list_del_init(&timer->entry);
timer->expires = expires;
-
- /* also change the interval if we have an interval timer */
- if (timer->interval)
+ if (periodic)
timer->interval = expires;
/* the timer can't expire anymore so we can release the lock */
internal_add_vtimer(timer);
return 1;
}
+
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+{
+ return __mod_vtimer(timer, expires, 0);
+}
EXPORT_SYMBOL(mod_virt_timer);
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires)
+{
+ return __mod_vtimer(timer, expires, 1);
+}
+EXPORT_SYMBOL(mod_virt_timer_periodic);
+
/*
* delete a virtual timer
*
*/
void init_cpu_vtimer(void)
{
- struct thread_info *ti = current_thread_info();
struct vtimer_queue *vq;
- S390_lowcore.user_timer = ti->user_timer;
- S390_lowcore.system_timer = ti->system_timer;
-
- /* kick the virtual timer */
- asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
- asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
-
/* initialize per cpu vtimer structure */
vq = &__get_cpu_var(virt_cpu_timer);
INIT_LIST_HEAD(&vq->list);
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
+ select HAVE_DMA_API_DEBUG
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
<http://www.linux-sh.org/>.
config SUPERH32
- def_bool !SUPERH64
+ def_bool ARCH = "sh"
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_FUNCTION_TRACER
select ARCH_HIBERNATION_POSSIBLE if MMU
config SUPERH64
- def_bool y if CPU_SH5
+ def_bool ARCH = "sh64"
config ARCH_DEFCONFIG
string
bool
select ARCH_SUSPEND_POSSIBLE
+if SUPERH32
+
choice
prompt "Processor sub-type selection"
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_CMT
+endchoice
+
+endif
+
+if SUPERH64
+
+choice
+ prompt "Processor sub-type selection"
+
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
endchoice
+endif
+
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
struct i2c_msg msg;
int ret;
+ if (!a)
+ return -ENODEV;
+
camera_power(1);
msg.addr = 0x6e;
msg.buf = camera_ncm03j_magic;
static struct ov772x_camera_info ov7725_info = {
.buswidth = SOCAM_DATAWIDTH_8,
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+ .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
.link = {
.power = ov7725_power,
},
* Renesas Technology Corp. SH7786 Urquell Support.
*
* Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on board-sh7785lcr.c
* Copyright (C) 2008 Yoshihiro Shimoda
*
* This file is subject to the terms and conditions of the GNU General Public
#include <asm/heartbeat.h>
#include <asm/sizes.h>
+/*
+ * bit 1234 5678
+ *----------------------------
+ * SW1 0101 0010 -> Pck 33MHz version
+ * (1101 0010) Pck 66MHz version
+ * SW2 0x1x xxxx -> little endian
+ * 29bit mode
+ * SW47 0001 1000 -> CS0 : on-board flash
+ * CS1 : SRAM, registers, LAN, PCMCIA
+ * 38400 bps for SCIF1
+ *
+ * Address
+ * 0x00000000 - 0x04000000 (CS0) Nor Flash
+ * 0x04000000 - 0x04200000 (CS1) SRAM
+ * 0x05000000 - 0x05800000 (CS1) on board register
+ * 0x05800000 - 0x06000000 (CS1) LAN91C111
+ * 0x06000000 - 0x06400000 (CS1) PCMCIA
+ * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
+ * 0x10000000 - 0x14000000 (CS4) PCIe
+ * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
+ * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
+ * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
+ * 0x1C000000 - (CS7) SH7786 Control register
+ */
+
+/* HeartBeat */
static struct resource heartbeat_resources[] = {
[0] = {
.start = BOARDREG(SLEDR),
.resource = heartbeat_resources,
};
+/* LAN91C111 */
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
},
};
+/* Nor Flash */
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "loader",
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:15:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 19:17:56 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
-# CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
+CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
#
# Timer and clock configuration
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
static struct sh4_pci_address_map sh7785_pci_map = {
.window0 = {
+#if defined(CONFIG_32BIT)
+ .base = SH7780_32BIT_DDR_BASE_ADDR,
+ .size = 0x40000000,
+#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
+#endif
},
.flags = SH4_PCIC_NO_RESET,
#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
+
struct sh4_pci_address_map;
/* arch/sh/drivers/pci/pci-sh7780.c */
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/dma-debug.h>
#include <asm/io.h>
static int __init pcibios_init(void)
pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
+ dma_debug_add_bus(&pci_bus_type);
+
return 0;
}
subsys_initcall(pcibios_init);
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm-generic/dma-coherent.h>
void *ptr, size_t size,
enum dma_data_direction dir)
{
+ dma_addr_t addr = virt_to_phys(ptr);
+
#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
if (dev->bus == &pci_bus_type)
- return virt_to_phys(ptr);
+ return addr;
#endif
dma_cache_sync(dev, ptr, size, dir);
- return virt_to_phys(ptr);
+ debug_dma_map_page(dev, virt_to_page(ptr),
+ (unsigned long)ptr & ~PAGE_MASK, size,
+ dir, addr, true);
+
+ return addr;
}
-#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ debug_dma_unmap_page(dev, addr, size, dir, true);
+}
static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir)
dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
#endif
sg[i].dma_address = sg_phys(&sg[i]);
+ sg[i].dma_length = sg[i].length;
}
+ debug_dma_map_sg(dev, sg, nents, i, dir);
+
return nents;
}
-#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0)
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ debug_dma_unmap_sg(dev, sg, nents, dir);
+}
static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
#endif
sg[i].dma_address = sg_phys(&sg[i]);
+ sg[i].dma_length = sg[i].length;
}
}
enum dma_data_direction dir)
{
dma_sync_single(dev, dma_handle, size, dir);
+ debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
}
static inline void dma_sync_single_for_device(struct device *dev,
enum dma_data_direction dir)
{
dma_sync_single(dev, dma_handle, size, dir);
+ debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
enum dma_data_direction direction)
{
dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+ debug_dma_sync_single_range_for_cpu(dev, dma_handle,
+ offset, size, direction);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
enum dma_data_direction direction)
{
dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+ debug_dma_sync_single_range_for_device(dev, dma_handle,
+ offset, size, direction);
}
enum dma_data_direction dir)
{
dma_sync_sg(dev, sg, nelems, dir);
+ debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
}
static inline void dma_sync_sg_for_device(struct device *dev,
enum dma_data_direction dir)
{
dma_sync_sg(dev, sg, nelems, dir);
+ debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
}
-
static inline int dma_get_cache_alignment(void)
{
/*
#ifndef __ASM_SH_FLAT_H
#define __ASM_SH_FLAT_H
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
struct pt_regs {
unsigned long long pc;
unsigned long long sr;
- unsigned long long syscall_nr;
+ long long syscall_nr;
unsigned long long regs[63];
unsigned long long tregs[8];
unsigned long long pad[2];
struct scatterlist {
#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
+ unsigned long sg_magic;
#endif
- unsigned long page_link;
- unsigned int offset;/* for highmem, page offset */
- dma_addr_t dma_address;
- unsigned int length;
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+ unsigned int length;
+ dma_addr_t dma_address;
+ unsigned int dma_length;
};
#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK
#define pcibus_to_node(bus) ((void)(bus), -1)
#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
CPU_MASK_ALL : \
- node_to_cpumask(pcibus_to_node(bus)) \
- )
+ node_to_cpumask(pcibus_to_node(bus)))
+#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
+ CPU_MASK_ALL_PTR : \
+ cpumask_of_node(pcibus_to_node(bus)))
+
#endif
#include <asm-generic/topology.h>
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
-#define NR_syscalls 333
+#define NR_syscalls 335
#ifdef __KERNEL__
#define __NR_dup3 358
#define __NR_pipe2 359
#define __NR_inotify_init1 360
+#define __NR_preadv 361
+#define __NR_pwritev 362
#ifdef __KERNEL__
-#define NR_syscalls 361
+#define NR_syscalls 363
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
{
clk_always_enable("uram0"); /* URAM */
clk_always_enable("xymem0"); /* XYMEM */
- clk_always_enable("rtc0"); /* RTC */
clk_always_enable("veu0"); /* VEU */
clk_always_enable("vpu0"); /* VPU */
clk_always_enable("jpu0"); /* JPU */
static int __init sh7723_devices_setup(void)
{
clk_always_enable("meram0"); /* MERAM */
- clk_always_enable("rtc0"); /* RTC */
clk_always_enable("veu1"); /* VEU2H1 */
clk_always_enable("veu0"); /* VEU2H0 */
clk_always_enable("vpu0"); /* VPU */
* Set the PHY and PLL enable bit
*/
__raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
- while (i-- &&
- ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS))
+ while (i--) {
+ if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
+ /* Set the PHY RST bit */
+ __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+ printk(KERN_INFO "sh7786 usb setup done\n");
+ break;
+ }
cpu_relax();
-
- if (i) {
- /* Set the PHY RST bit */
- __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
- printk(KERN_INFO "sh7786 usb setup done\n");
}
}
* for more details.
*/
#include <linux/errno.h>
+#include <linux/init.h>
#include <linux/sys.h>
#include <cpu/registers.h>
#include <asm/processor.h>
/*
- * --- .text.init Section
+ * --- .init.text Section
*/
- .section .text.init, "ax"
+ __INIT
/*
* void trap_init (void)
*
* Head.S contains the SH exception handlers and startup code.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
1:
.skip PAGE_SIZE - empty_zero_page - 1b
- .section .text.head, "ax"
+ __HEAD
/*
* Condition at the entry of _stext:
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+
+#include <linux/init.h>
+
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/tlb.h>
fpu_in_use: .quad 0
- .section .text.head, "ax"
+ __HEAD
.balign L1_CACHE_BYTES
/*
* Condition at the entry of __stext:
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
+ /*
+ * The shift for mmap2 is constant, regardless of PAGE_SIZE
+ * setting.
+ */
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+ return -EINVAL;
+
+ pgoff >>= PAGE_SHIFT - 12;
+
return do_mmap2(addr, len, prot, flags, fd, pgoff);
}
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_writev
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1 /* 360 */
+ .long sys_preadv
+ .long sys_pwritev
if (!clocksource_sh.rating)
return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
- cycles = clocksource_sh.read();
+ cycles = clocksource_sh.read(&clocksource_sh);
return cyc2ns(&clocksource_sh, cycles);
}
#endif
*/
static int tmus_are_scaled;
-static cycle_t tmu_timer_read(void)
+static cycle_t tmu_timer_read(struct clocksource *cs)
{
return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
}
} = 0
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
} = 0
.text : C_PHYS(.text) {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
*(.text64)
*(.text..SHmedia32)
* for more details.
*/
#include <linux/mm.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/addrspace.h>
-#include <asm/io.h>
+
+#define PREALLOC_DMA_DEBUG_ENTRIES 4096
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+ return 0;
+}
+fs_initcall(dma_init);
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
*dma_handle = virt_to_phys(ret);
+
+ debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache);
+
return ret_nocache;
}
EXPORT_SYMBOL(dma_alloc_coherent);
unsigned long pfn = dma_handle >> PAGE_SHIFT;
int k;
- if (!dma_release_from_coherent(dev, order, vaddr)) {
- WARN_ON(irqs_disabled()); /* for portability */
- for (k = 0; k < (1 << order); k++)
- __free_pages(pfn_to_page(pfn + k), 0);
- iounmap(vaddr);
- }
+ WARN_ON(irqs_disabled()); /* for portability */
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
+
+ debug_dma_free_coherent(dev, size, vaddr, dma_handle);
+ for (k = 0; k < (1 << order); k++)
+ __free_pages(pfn_to_page(pfn + k), 0);
+ iounmap(vaddr);
}
EXPORT_SYMBOL(dma_free_coherent);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Thu Jan 8 16:45:44 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 04:04:46 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_PCI=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan 2 18:14:26 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 02:03:07 2009
#
+CONFIG_64BIT=y
CONFIG_SPARC=y
+# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITS=64
-CONFIG_64BIT=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_CASSINI=m
+CONFIG_SUNGEM=m
+# CONFIG_CASSINI is not set
CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=m
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_N2RNG=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#ifdef __KERNEL__
+#include <asm/system.h>
+
#define ATOMIC_INIT(i) { (i) }
extern int __atomic_add_return(int, atomic_t *);
else \
clear_thread_flag(TIF_ABI_PENDING); \
/* flush_thread will update pgd cache */ \
- if (current->personality != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ if (personality(current->personality) != PER_LINUX32) \
+ set_personality(PER_LINUX | \
+ (current->personality & (~PER_MASK))); \
} while (0)
#endif /* !(__ASM_SPARC64_ELF_H) */
if (!strcmp(parent->name, "dma")) {
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0], PARPORT_DMA_NOFIFO,
- op->dev.parent->parent);
+ op->dev.parent->parent, 0);
if (!p)
return -ENOMEM;
dev_set_drvdata(&op->dev, p);
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0],
slot,
- op->dev.parent);
+ op->dev.parent,
+ 0);
err = -ENOMEM;
if (!p)
goto out_disable_irq;
#define __NR_pipe2 321
#define __NR_inotify_init1 322
#define __NR_accept4 323
+#define __NR_preadv 324
+#define __NR_pwritev 325
-#define NR_SYSCALLS 324
+#define NR_SYSCALLS 326
#ifdef __32bit_syscall_numbers__
/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .section .text.head,"ax"
+ __HEAD
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
nop
/* The code above should be at beginning and we have to take care about
- * short jumps, as branching to .text.init section from .text is usually
+ * short jumps, as branching to .init.text section from .text is usually
* impossible */
__INIT
/* Acquire boot time privileged register values, this will help debugging.
jmpl %g2 + %g0, %g0
nop
- .section .text.init.refok
+ __REF
sun4u_init:
BRANCH_IF_SUN4V(g1, sun4v_init)
}
}
-static void sun4u_set_affinity(unsigned int virt_irq,
+static int sun4u_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
sun4u_irq_enable(virt_irq);
+
+ return 0;
}
/* Don't do anything. The desc->status check for IRQ_DISABLED in
ino, err);
}
-static void sun4v_set_affinity(unsigned int virt_irq,
+static int sun4v_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
if (err != HV_EOK)
printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): "
"err(%d)\n", ino, cpuid, err);
+
+ return 0;
}
static void sun4v_irq_disable(unsigned int virt_irq)
dev_handle, dev_ino, err);
}
-static void sun4v_virt_set_affinity(unsigned int virt_irq,
+static int sun4v_virt_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
unsigned long cpuid, dev_handle, dev_ino;
printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): "
"err(%d)\n",
dev_handle, dev_ino, cpuid, err);
+
+ return 0;
}
static void sun4v_virq_disable(unsigned int virt_irq)
free_queue(lp->tx_num_entries, lp->tx_base);
out_free_mssbuf:
- if (mssbuf)
- kfree(mssbuf);
+ kfree(mssbuf);
out_free_iommu:
ldc_iommu_release(lp);
hlist_del(&lp->list);
- if (lp->mssbuf)
- kfree(lp->mssbuf);
+ kfree(lp->mssbuf);
ldc_iommu_release(lp);
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
return r;
}
-static void __init get_cells(struct device_node *dp,
- int *addrc, int *sizec)
+static void get_cells(struct device_node *dp, int *addrc, int *sizec)
{
if (addrc)
*addrc = of_n_addr_cells(dp);
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB);
}
-static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm,
- struct of_device *op, u32 portid)
+static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm,
+ struct of_device *op, u32 portid)
{
const struct linux_prom64_registers *regs;
struct device_node *dp = op->node;
pci_config_write8(addr, 64);
}
-static void __init psycho_scan_bus(struct pci_pbm_info *pbm,
- struct device *parent)
+static void __devinit psycho_scan_bus(struct pci_pbm_info *pbm,
+ struct device *parent)
{
pbm_config_busmastering(pbm);
pbm->is_66mhz_capable = 0;
#define PSYCHO_MEMSPACE_B 0x180000000UL
#define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL
-static void __init psycho_pbm_init(struct pci_pbm_info *pbm,
- struct of_device *op, int is_pbm_a)
+static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm,
+ struct of_device *op, int is_pbm_a)
{
psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO);
psycho_pbm_strbuf_init(pbm, is_pbm_a);
}
}
-static void __init sabre_scan_bus(struct pci_pbm_info *pbm,
- struct device *parent)
+static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm,
+ struct device *parent)
{
static int once;
sabre_register_error_handlers(pbm);
}
-static void __init sabre_pbm_init(struct pci_pbm_info *pbm,
- struct of_device *op)
+static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm,
+ struct of_device *op)
{
psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE);
pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR;
.sync_sg_for_cpu = dma_4v_sync_sg_for_cpu,
};
-static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
- struct device *parent)
+static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
+ struct device *parent)
{
struct property *prop;
struct device_node *dp;
/* XXX register error interrupt handlers XXX */
}
-static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm,
- struct iommu *iommu)
+static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm,
+ struct iommu *iommu)
{
struct iommu_arena *arena = &iommu->arena;
unsigned long i, cnt = 0;
return cnt;
}
-static int __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
+static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm)
{
static const u32 vdma_default[] = { 0x80000000, 0x80000000 };
struct iommu *iommu = pbm->iommu;
}
#endif /* !(CONFIG_PCI_MSI) */
-static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
- struct of_device *op, u32 devhandle)
+static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm,
+ struct of_device *op, u32 devhandle)
{
struct device_node *dp = op->node;
int err;
return IRQ_HANDLED;
}
-static int __init has_button_interrupt(unsigned int irq, struct device_node *dp)
+static int __devinit has_button_interrupt(unsigned int irq, struct device_node *dp)
{
if (irq == 0xffffffff)
return 0;
while (!cpu_isset(cpuid, smp_commenced_mask))
rmb();
- ipi_call_lock();
+ ipi_call_lock_irq();
cpu_set(cpuid, cpu_online_map);
- ipi_call_unlock();
+ ipi_call_unlock_irq();
/* idle thread is expected to have preempt disabled */
preempt_disable();
struct compat_stat64 __user * statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_compat_stat64(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_compat_stat64(&stat, statbuf);
}
asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
/*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
/*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
/*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
+/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
/*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev
#endif /* CONFIG_COMPAT */
.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
/*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
-/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4
+/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev
}
EXPORT_SYMBOL(udelay);
+static cycle_t clocksource_tick_read(struct clocksource *cs)
+{
+ return tick_ops->get_tick();
+}
+
void __init time_init(void)
{
unsigned long freq = sparc64_init_timers();
clocksource_tick.mult =
clocksource_hz2mult(freq,
clocksource_tick.shift);
- clocksource_tick.read = tick_ops->get_tick;
+ clocksource_tick.read = clocksource_tick_read;
printk("clocksource: mult[%x] shift[%d]\n",
clocksource_tick.mult, clocksource_tick.shift);
.text TEXTSTART :
{
_text = .;
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#define EX_LD(x) \
98: x; \
- .section .fixup; \
+ .section .fixup, "ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \
#define EX_ST(x) \
98: x; \
- .section .fixup; \
+ .section .fixup,"ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \
#define MAX_BANKS 32
-static struct linux_prom64_registers pavail[MAX_BANKS] __initdata;
-static int pavail_ents __initdata;
+static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata;
+static int pavail_ents __devinitdata;
static int cmp_p64(const void *a, const void *b)
{
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
printk("Booting Linux...\n");
}
-int __init page_in_phys_avail(unsigned long paddr)
+int __devinit page_in_phys_avail(unsigned long paddr)
{
int i;
#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
- bool
+ tristate
default n
source "arch/um/Kconfig.debug"
return IRQ_HANDLED;
}
-static cycle_t itimer_read(void)
+static cycle_t itimer_read(struct clocksource *cs)
{
return os_nsecs() / 1000;
}
--- /dev/null
+
+obj-$(CONFIG_KVM) += kvm/
+
+# Xen paravirtualization support
+obj-$(CONFIG_XEN) += xen/
+
+# lguest paravirtualization support
+obj-$(CONFIG_LGUEST_GUEST) += lguest/
+
+obj-y += kernel/
+obj-y += mm/
+
+obj-y += crypto/
+obj-y += vdso/
+obj-$(CONFIG_IA32_EMULATION) += ia32/
+
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+config OUTPUT_FORMAT
+ string
+ default "elf32-i386" if X86_32
+ default "elf64-x86-64" if X86_64
+
config ARCH_DEFCONFIG
string
default "arch/x86/configs/i386_defconfig" if X86_32
config X86_X2APIC
bool "Support x2apic"
- depends on X86_LOCAL_APIC && X86_64
- select INTR_REMAP
+ depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
---help---
This enables x2apic support on CPUs that have this feature.
This allows 32-bit apic IDs (so it can support very large systems),
and accesses the local apic via MSRs not via mmio.
- ( On certain CPU models you may need to enable INTR_REMAP too,
- to get functional x2apic mode. )
-
If you don't know what to do here, say N.
config SPARSE_IRQ
If you don't know what to do here, say N.
-config NUMA_MIGRATE_IRQ_DESC
- bool "Move irq desc when changing irq smp_affinity"
+config NUMA_IRQ_DESC
+ def_bool y
depends on SPARSE_IRQ && NUMA
- default n
- ---help---
- This enables moving irq_desc to cpu/node that irq will use handled.
-
- If you don't know what to do here, say N.
config X86_MPPARSE
bool "Enable MPS table" if ACPI
bool "SGI Ultraviolet"
depends on X86_64
depends on X86_EXTENDED_PLATFORM
- select X86_X2APIC
+ depends on NUMA
+ depends on X86_X2APIC
---help---
This option is needed in order to support SGI Ultraviolet systems.
If you don't have one of these, you should say N here.
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_SPINLOCKS
+ bool "Paravirtualization layer for spinlocks"
+ depends on PARAVIRT && SMP && EXPERIMENTAL
+ ---help---
+ Paravirtualized spinlocks allow a pvops backend to replace the
+ spinlock implementation with something virtualization-friendly
+ (for example, block the virtual CPU rather than spinning).
+
+ Unfortunately the downside is an up to 5% performance hit on
+ native kernels, with various workloads.
+
+ If you are unsure how to answer this question, answer N.
+
config PARAVIRT_CLOCK
bool
default n
config NR_CPUS
int "Maximum number of CPUs" if SMP && !MAXSMP
+ range 2 8 if SMP && X86_32 && !X86_BIGSMP
range 2 512 if SMP && !MAXSMP
default "1" if !SMP
default "4096" if MAXSMP
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x1000000" if X86_NUMAQ
- default "0x200000" if X86_64
- default "0x100000"
+ default "0x1000000"
---help---
This gives the physical address where the kernel is loaded.
to be specifically compiled to run from a specific memory area
(normally a reserved region) and this option comes handy.
- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
+ So if you are using bzImage for capturing the crash dump,
+ leave the value here unchanged to 0x1000000 and set
+ CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux
+ for capturing the crash dump change this value to start of
+ the reserved region. In other words, it can be set based on
+ the "X" value as specified in the "crashkernel=YM@XM"
+ command line boot parameter passed to the panic-ed
+ kernel. Please take a look at Documentation/kdump/kdump.txt
+ for more details about crash dumps.
Usage of bzImage for capturing the crash dump is recommended as
one does not have to build two kernels. Same kernel can be used
Don't change this unless you know what you are doing.
config RELOCATABLE
- bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Build a relocatable kernel"
+ default y
---help---
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
it has been loaded at and the compile time physical address
(CONFIG_PHYSICAL_START) is ignored.
+# Relocation on x86-32 needs some additional build support
+config X86_NEED_RELOCS
+ def_bool y
+ depends on X86_32 && RELOCATABLE
+
config PHYSICAL_ALIGN
hex
prompt "Alignment value to which kernel should be aligned" if X86_32
- default "0x100000" if X86_32
- default "0x200000" if X86_64
- range 0x2000 0x400000
+ default "0x1000000"
+ range 0x2000 0x1000000
---help---
This value puts the alignment restrictions on physical address
where kernel is loaded and run from. Kernel is compiled for an
bool "Branch Trace Store"
default y
depends on X86_DEBUGCTLMSR
+ depends on BROKEN
---help---
This adds a ptrace interface to the hardware's branch trace store.
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
-core-$(CONFIG_KVM) += arch/x86/kvm/
-
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
libs-y += arch/x86/lib/
-# Sub architecture files that needs linking first
-core-y += $(fcore-y)
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-core-y += arch/x86/kernel/
-core-y += arch/x86/mm/
-
-core-y += arch/x86/crypto/
-core-y += arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+# See arch/x86/Kbuild for content of core part of the kernel
+core-y += arch/x86/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
boot := arch/x86/boot
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
PHONY += bzImage $(BOOT_TARGETS)
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
+PHONY += install
+install:
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
cpustr.h
mkcpustr
offsets.h
+voffset.h
+zoffset.h
setup
setup.bin
setup.elf
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-sed-offsets := -e 's/^00*/0/' \
- -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
-quiet_cmd_offsets = OFFSETS $@
- cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+ cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+ $(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,zoffset)
-targets += offsets.h
AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
relocs
vmlinux.bin.all
vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S
LDFLAGS := -m elf_$(UTS_MACHINE)
LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y := mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
$(call if_changed,relocs)
vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD $@
- cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
- $(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-else
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA) := lzma
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+ cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+ $(call if_changed,mkpiggy)
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
- * Page 0 is deliberately kept safe, since System Management Mode code in
+ * Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
+ * useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.text
+ .text
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/boot.h>
#include <asm/asm-offsets.h>
-.section ".text.head","ax",@progbits
+ .section ".text.head","ax",@progbits
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
- testb $(1<<6), BP_loadflags(%esi)
- jnz 1f
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 1f
cli
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
- movl %eax,%ss
+ movl $__BOOT_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ movl %eax, %ss
1:
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
+ leal (BP_scratch+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+ movl %ebp, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $LOAD_PHYSICAL_ADDR, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack */
- addl $(32768 + 18), %ebx
- /* Align on a 4K boundary */
- addl $4095, %ebx
- andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
+
+ /* Set up the stack */
+ leal boot_stack_end(%ebx), %esp
+
+ /* Zero EFLAGS */
+ pushl $0
+ popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- pushl %esi
- leal _end(%ebp), %esi
- leal _end(%ebx), %edi
- movl $(_end - startup_32), %ecx
+ pushl %esi
+ leal (_bss-4)(%ebp), %esi
+ leal (_bss-4)(%ebx), %edi
+ movl $(_bss - startup_32), %ecx
+ shrl $2, %ecx
std
- rep
- movsb
+ rep movsl
cld
- popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebp
-#endif
+ popl %esi
/*
* Jump to the relocated address.
*/
- leal relocated(%ebx), %eax
- jmp *%eax
+ leal relocated(%ebx), %eax
+ jmp *%eax
ENDPROC(startup_32)
-.section ".text"
+ .text
relocated:
/*
- * Clear BSS
- */
- xorl %eax,%eax
- leal _edata(%ebx),%edi
- leal _end(%ebx), %ecx
- subl %edi,%ecx
- cld
- rep
- stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
*/
- leal boot_stack_end(%ebx), %esp
+ xorl %eax, %eax
+ leal _bss(%ebx), %edi
+ leal _ebss(%ebx), %ecx
+ subl %edi, %ecx
+ shrl $2, %ecx
+ rep stosl
/*
* Do the decompression, and jump to the new kernel..
*/
- movl output_len(%ebx), %eax
- pushl %eax
- # push arguments for decompress_kernel:
- pushl %ebp # output address
- movl input_len(%ebx), %eax
- pushl %eax # input_len
- leal input_data(%ebx), %eax
- pushl %eax # input_data
- leal boot_heap(%ebx), %eax
- pushl %eax # heap area
- pushl %esi # real mode pointer
- call decompress_kernel
- addl $20, %esp
- popl %ecx
+ leal z_extract_offset_negative(%ebx), %ebp
+ /* push arguments for decompress_kernel: */
+ pushl %ebp /* output address */
+ pushl $z_input_len /* input_len */
+ leal input_data(%ebx), %eax
+ pushl %eax /* input_data */
+ leal boot_heap(%ebx), %eax
+ pushl %eax /* heap area */
+ pushl %esi /* real mode pointer */
+ call decompress_kernel
+ addl $20, %esp
#if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
*/
- movl %ebp, %edi
- addl %ecx, %edi
+ leal z_output_len(%ebp), %edi
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
* and where it was actually loaded.
*/
- movl %ebp, %ebx
- subl $LOAD_PHYSICAL_ADDR, %ebx
- jz 2f /* Nothing to be done if loaded at compiled addr. */
+ movl %ebp, %ebx
+ subl $LOAD_PHYSICAL_ADDR, %ebx
+ jz 2f /* Nothing to be done if loaded at compiled addr. */
/*
* Process relocations.
*/
-1: subl $4, %edi
- movl 0(%edi), %ecx
- testl %ecx, %ecx
- jz 2f
- addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
- jmp 1b
+1: subl $4, %edi
+ movl (%edi), %ecx
+ testl %ecx, %ecx
+ jz 2f
+ addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+ jmp 1b
2:
#endif
/*
* Jump to the decompressed kernel.
*/
- xorl %ebx,%ebx
- jmp *%ebp
+ xorl %ebx, %ebx
+ jmp *%ebp
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.code32
-.text
+ .code32
+ .text
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/processor-flags.h>
#include <asm/asm-offsets.h>
-.section ".text.head"
+ .section ".text.head"
.code32
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
testb $(1<<6), BP_loadflags(%esi)
jnz 1f
movl %eax, %ss
1:
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
+ leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
testl %eax, %eax
jnz no_longmode
-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
* and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
- addl $(PMD_PAGE_SIZE -1), %ebx
- andl $PMD_PAGE_MASK, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $CONFIG_PHYSICAL_START, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
/*
* Prepare for entering 64 bit mode
/*
* Build early 4G boot pagetable
*/
- /* Initialize Page tables to 0*/
+ /* Initialize Page tables to 0 */
leal pgtable(%ebx), %edi
xorl %eax, %eax
movl $((4096*6)/4), %ecx
btsl $_EFER_LME, %eax
wrmsr
- /* Setup for the jump to 64bit mode
+ /*
+ * Setup for the jump to 64bit mode
*
* When the jump is performend we will be in long mode but
* in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
#include "../../kernel/verify_cpu_64.S"
- /* Be careful here startup_64 needs to be at a predictable
+ /*
+ * Be careful here startup_64 needs to be at a predictable
* address so I can export it in an ELF header. Bootloaders
* should look at the ELF header to find this address, as
* it may change in the future.
.code64
.org 0x200
ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
+ /*
+ * We come here either from startup_32 or directly from a
* 64bit bootloader. If we come here from a bootloader we depend on
* an identity mapped page table being provied that maps our
* entire text+data+bss and hopefully all of memory.
movl $0x20, %eax
ltr %ax
- /* Compute the decompressed kernel start address. It is where
+ /*
+ * Compute the decompressed kernel start address. It is where
* we were loaded at aligned to a 2M boundary. %rbp contains the
* decompressed kernel start address.
*
* If it is a relocatable kernel then decompress and run the kernel
* from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
+ * run the kernel from LOAD_PHYSICAL_ADDR
+ *
+ * We cannot rely on the calculation done in 32-bit mode, since we
+ * may have been invoked via the 64-bit entry point.
*/
/* Start with the delta to where the kernel will run at. */
#ifdef CONFIG_RELOCATABLE
leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(PMD_PAGE_SIZE - 1), %rbp
- andq $PMD_PAGE_MASK, %rbp
- movq %rbp, %rbx
+ movl BP_kernel_alignment(%rsi), %eax
+ decl %eax
+ addq %rax, %rbp
+ notq %rax
+ andq %rax, %rbp
#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
+ movq $LOAD_PHYSICAL_ADDR, %rbp
#endif
- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ leaq z_extract_offset(%rbp), %rbx
+
+ /* Set up the stack */
+ leaq boot_stack_end(%rbx), %rsp
+
+ /* Zero EFLAGS */
+ pushq $0
+ popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- leaq _end_before_pgt(%rip), %r8
- leaq _end_before_pgt(%rbx), %r9
- movq $_end_before_pgt /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
+ pushq %rsi
+ leaq (_bss-8)(%rip), %rsi
+ leaq (_bss-8)(%rbx), %rdi
+ movq $_bss /* - $startup_32 */, %rcx
+ shrq $3, %rcx
+ std
+ rep movsq
+ cld
+ popq %rsi
/*
* Jump to the relocated address.
leaq relocated(%rbx), %rax
jmp *%rax
-.section ".text"
+ .text
relocated:
/*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
*/
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end_before_pgt(%rbx), %rcx
+ xorl %eax, %eax
+ leaq _bss(%rip), %rdi
+ leaq _ebss(%rip), %rcx
subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq boot_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
+ shrq $3, %rcx
+ rep stosq
/*
* Do the decompression, and jump to the new kernel..
*/
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq boot_heap(%rip), %rsi # malloc area for uncompression
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
+ pushq %rsi /* Save the real mode argument */
+ movq %rsi, %rdi /* real mode address */
+ leaq boot_heap(%rip), %rsi /* malloc area for uncompression */
+ leaq input_data(%rip), %rdx /* input_data */
+ movl $z_input_len, %ecx /* input_len */
+ movq %rbp, %r8 /* output target address */
call decompress_kernel
popq %rsi
.quad 0x0000000000000000 /* TS continued */
gdt_end:
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+ .section ".pgtable","a",@nobits
+ .balign 4096
+pgtable:
+ .fill 6*4096, 1, 0
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+ error("Destination address inappropriately aligned");
#ifdef CONFIG_X86_64
- if ((unsigned long)output & (__KERNEL_ALIGN - 1))
- error("Destination address not 2M aligned");
- if ((unsigned long)output >= 0xffffffffffUL)
+ if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
- error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
error("Destination address too large");
+#endif
#ifndef CONFIG_RELOCATABLE
- if ((u32)output != LOAD_PHYSICAL_ADDR)
+ if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
error("Wrong destination address");
-#endif
#endif
if (!quiet)
--- /dev/null
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+ const uint8_t *cp = p;
+
+ return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+ ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+ uint32_t olen;
+ long ilen;
+ unsigned long offs;
+ FILE *f;
+
+ if (argc < 2) {
+ fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+ return 1;
+ }
+
+ /* Get the information for the compressed kernel image first */
+
+ f = fopen(argv[1], "r");
+ if (!f) {
+ perror(argv[1]);
+ return 1;
+ }
+
+
+ if (fseek(f, -4L, SEEK_END)) {
+ perror(argv[1]);
+ }
+ fread(&olen, sizeof olen, 1, f);
+ ilen = ftell(f);
+ olen = getle32(&olen);
+ fclose(f);
+
+ /*
+ * Now we have the input (compressed) and output (uncompressed)
+ * sizes, compute the necessary decompression offset...
+ */
+
+ offs = (olen > ilen) ? olen - ilen : 0;
+ offs += olen >> 12; /* Add 8 bytes for each 32K block */
+ offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */
+ offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+ printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+ printf(".globl z_input_len\n");
+ printf("z_input_len = %lu\n", ilen);
+ printf(".globl z_output_len\n");
+ printf("z_output_len = %lu\n", (unsigned long)olen);
+ printf(".globl z_extract_offset\n");
+ printf("z_extract_offset = 0x%lx\n", offs);
+ /* z_extract_offset_negative allows simplification of head_32.S */
+ printf(".globl z_extract_offset_negative\n");
+ printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+ printf(".globl input_data, input_data_end\n");
+ printf("input_data:\n");
+ printf(".incbin \"%s\"\n", argv[1]);
+ printf("input_data_end:\n");
+
+ return 0;
+}
if (sym->st_shndx == SHN_ABS) {
continue;
}
- if (r_type == R_386_PC32) {
- /* PC relative relocations don't need to be adjusted */
+ if (r_type == R_386_NONE || r_type == R_386_PC32) {
+ /*
+ * NONE can be ignored and and PC relative
+ * relocations don't need to be adjusted.
+ */
}
else if (r_type == R_386_32) {
/* Visit relocations that need to be adjusted */
--- /dev/null
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
+SECTIONS
+{
+ /* Be careful parts of head_64.S assume startup_32 is at
+ * address 0.
+ */
+ . = 0;
+ .text.head : {
+ _head = . ;
+ *(.text.head)
+ _ehead = . ;
+ }
+ .rodata.compressed : {
+ *(.rodata.compressed)
+ }
+ .text : {
+ _text = .; /* Text */
+ *(.text)
+ *(.text.*)
+ _etext = . ;
+ }
+ .rodata : {
+ _rodata = . ;
+ *(.rodata) /* read-only data */
+ *(.rodata.*)
+ _erodata = . ;
+ }
+ .data : {
+ _data = . ;
+ *(.data)
+ *(.data.*)
+ _edata = . ;
+ }
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .bss : {
+ _bss = . ;
+ *(.bss)
+ *(.bss.*)
+ *(COMMON)
+ . = ALIGN(8); /* For convenience during zeroing */
+ _ebss = .;
+ }
+#ifdef CONFIG_X86_64
+ . = ALIGN(PAGE_SIZE);
+ .pgtable : {
+ _pgtable = . ;
+ *(.pgtable)
+ _epgtable = . ;
+ }
+#endif
+ _end = .;
+}
+++ /dev/null
-SECTIONS
-{
- .rodata.compressed : {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
+++ /dev/null
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
- /* Be careful parts of head_32.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text.head : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- }
- .rodata.compressed : {
- *(.rodata.compressed)
- }
- .text : {
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- _end = . ;
- }
-}
+++ /dev/null
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(startup_64)
-SECTIONS
-{
- /* Be careful parts of head_64.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text.head : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- }
- .rodata.compressed : {
- *(.rodata.compressed)
- }
- .text : {
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- . = ALIGN(8);
- _end_before_pgt = . ;
- . = ALIGN(4096);
- pgtable = . ;
- . = . + 4096 * 6;
- _ebss = .;
- }
-}
#include <asm/page_types.h>
#include <asm/setup.h>
#include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"
BOOTSEG = 0x07C0 /* original address of boot-sector */
SYSSEG = 0x1000 /* historical load address >> 4 */
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
- .word 0x0209 # header version number (>= 0x0105)
+ .word 0x020a # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
# end of setup code can be used by setup
# for local heap purposes.
-pad1: .word 0
+ext_loader_ver:
+ .byte 0 # Extended boot loader version
+ext_loader_type:
+ .byte 0 # Extended boot loader type
+
cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
# If nonzero, a 32-bit pointer
# to the kernel command line.
#else
relocatable_kernel: .byte 0
#endif
-pad2: .byte 0
+min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
pad3: .word 0
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
hardware_subarch_data: .quad 0
-payload_offset: .long input_data
-payload_length: .long input_data_end-input_data
+payload_offset: .long ZO_input_data
+payload_length: .long ZO_z_input_len
setup_data: .quad 0 # 64-bit physical pointer to
# single linked list of
# struct setup_data
+pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE (VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size: .long INIT_SIZE # kernel initialization size
+
# End of setup header #####################################################
.section ".inittext", "ax"
#define SMAP 0x534d4150 /* ASCII "SMAP" */
-struct e820_ext_entry {
- struct e820entry std;
- u32 ext_flags;
-} __attribute__((packed));
-
static int detect_memory_e820(void)
{
int count = 0;
u32 size, id, edi;
u8 err;
struct e820entry *desc = boot_params.e820_map;
- static struct e820_ext_entry buf; /* static so it is zeroed */
+ static struct e820entry buf; /* static so it is zeroed */
/*
- * Set this here so that if the BIOS doesn't change this field
- * but still doesn't change %ecx, we're still okay...
+ * Note: at least one BIOS is known which assumes that the
+ * buffer pointed to by one e820 call is the same one as
+ * the previous call, and only changes modified fields. Therefore,
+ * we use a temporary buffer and copy the results entry by entry.
+ *
+ * This routine deliberately does not try to account for
+ * ACPI 3+ extended attributes. This is because there are
+ * BIOSes in the field which report zero for the valid bit for
+ * all ranges, and we don't currently make any use of the
+ * other attribute bits. Revisit this if we see the extended
+ * attribute bits deployed in a meaningful way in the future.
*/
- buf.ext_flags = 1;
do {
size = sizeof buf;
break;
}
- /* ACPI 3.0 added the extended flags support. If bit 0
- in the extended flags is zero, we're supposed to simply
- ignore the entry -- a backwards incompatible change! */
- if (size > 20 && !(buf.ext_flags & 1))
- continue;
-
- *desc++ = buf.std;
+ *desc++ = buf;
count++;
} while (next && count < ARRAY_SIZE(boot_params.e820_map));
return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4;
}
-static void vga_set_480_scanlines(int lines)
+static void vga_set_480_scanlines(void)
{
u16 crtc; /* CRTC base address */
u8 csel; /* CRTC miscellaneous output register */
- u8 ovfw; /* CRTC overflow register */
- int end = lines-1;
crtc = vga_crtc();
- ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
-
out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */
out_idx(0x0b, crtc, 0x06); /* Vertical total */
- out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
+ out_idx(0x3e, crtc, 0x07); /* Vertical overflow */
out_idx(0xea, crtc, 0x10); /* Vertical sync start */
- out_idx(end, crtc, 0x12); /* Vertical display end */
+ out_idx(0xdf, crtc, 0x12); /* Vertical display end */
out_idx(0xe7, crtc, 0x15); /* Vertical blank start */
out_idx(0x04, crtc, 0x16); /* Vertical blank end */
csel = inb(0x3cc);
outb(csel, 0x3c2);
}
+static void vga_set_vertical_end(int lines)
+{
+ u16 crtc; /* CRTC base address */
+ u8 ovfw; /* CRTC overflow register */
+ int end = lines-1;
+
+ crtc = vga_crtc();
+
+ ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
+
+ out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
+ out_idx(end, crtc, 0x12); /* Vertical display end */
+}
+
static void vga_set_80x30(void)
{
- vga_set_480_scanlines(30*16);
+ vga_set_480_scanlines();
+ vga_set_vertical_end(30*16);
}
static void vga_set_80x34(void)
{
+ vga_set_480_scanlines();
vga_set_14font();
- vga_set_480_scanlines(34*14);
+ vga_set_vertical_end(34*14);
}
static void vga_set_80x60(void)
{
+ vga_set_480_scanlines();
vga_set_8font();
- vga_set_480_scanlines(60*8);
+ vga_set_vertical_end(60*8);
}
static int vga_set_mode(struct mode_info *mode)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:50:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:21:55 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
+CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_X86_NEED_RELOCS=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:44:16 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:22:00 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
+# CONFIG_X86_UV is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_CPU_SUP_CENTAUR=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
-# CONFIG_SGI_GRU is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
struct stat64 __user *statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_stat64(statbuf, &stat);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_stat64(statbuf, &stat);
}
/*
#include <linux/types.h>
#include <linux/stddef.h>
+#include <linux/stringify.h>
#include <asm/asm.h>
/*
const unsigned char *const *find_nop_table(void);
+/* alternative assembly primitive: */
+#define ALTERNATIVE(oldinstr, newinstr, feature) \
+ \
+ "661:\n\t" oldinstr "\n662:\n" \
+ ".section .altinstructions,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR "661b\n" /* label */ \
+ _ASM_PTR "663f\n" /* new instruction */ \
+ " .byte " __stringify(feature) "\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* sourcelen */ \
+ " .byte 664f-663f\n" /* replacementlen */ \
+ ".previous\n" \
+ ".section .altinstr_replacement, \"ax\"\n" \
+ "663:\n\t" newinstr "\n664:\n" /* replacement */ \
+ ".previous"
+
/*
* Alternative instructions for different CPU types or capabilities.
*
* without volatile and memory clobber.
*/
#define alternative(oldinstr, newinstr, feature) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature) : "memory")
+ asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) : : : "memory")
/*
* Alternative inline assembly with input.
* Best is to use constraints that are fixed size (like (%1) ... "r")
* If you use variable sized constraints like "m" or "g" in the
* replacement make sure to pad to the worst case length.
+ * Leaving an unused argument 0 to keep API compatibility.
*/
#define alternative_input(oldinstr, newinstr, feature, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature), ##input)
+ asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) \
+ : : "i" (0), ## input)
/* Like alternative_input, but with a single output argument */
#define alternative_io(oldinstr, newinstr, feature, output, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c[feat]\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" : output : [feat] "i" (feature), ##input)
+ asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) \
+ : output : "i" (0), ## input)
/*
* use this macro(s) if you need more than one output parameter
extern void native_apic_icr_write(u32 low, u32 id);
extern u64 native_apic_icr_read(void);
-#define EIM_8BIT_APIC_ID 0
-#define EIM_32BIT_APIC_ID 1
+extern int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
/*
return val;
}
-extern int x2apic, x2apic_phys;
+extern int x2apic_phys;
extern void check_x2apic(void);
extern void enable_x2apic(void);
-extern void enable_IR_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
return 1;
return 0;
}
+
+#define x2apic_supported() (cpu_has_x2apic)
#else
static inline void check_x2apic(void)
{
static inline void enable_x2apic(void)
{
}
-static inline void enable_IR_x2apic(void)
-{
-}
static inline int x2apic_enabled(void)
{
return 0;
}
-#define x2apic 0
-
+#define x2apic_preenabled 0
+#define x2apic_supported() 0
#endif
-extern int get_physical_broadcast(void);
+extern void enable_IR_x2apic(void);
-#ifdef CONFIG_X86_X2APIC
-static inline void ack_x2APIC_irq(void)
-{
- /* Docs say use 0 for future compatibility */
- native_apic_msr_write(APIC_EOI, 0);
-}
-#endif
+extern int get_physical_broadcast(void);
+extern void apic_disable(void);
extern int lapic_get_maxlvt(void);
extern void clear_local_APIC(void);
extern void connect_bsp_APIC(void);
#define local_apic_timer_c2_ok 1
static inline void init_apic_mappings(void) { }
static inline void disable_local_APIC(void) { }
-
+static inline void apic_disable(void) { }
#endif /* !CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_64
# define APIC_INTEGRATED(x) (1)
#endif
#define APIC_XAPIC(x) ((x) >= 0x14)
+#define APIC_EXT_SPACE(x) ((x) & 0x80000000)
#define APIC_TASKPRI 0x80
#define APIC_TPRI_MASK 0xFFu
#define APIC_ARBPRI 0x90
#define APIC_TDR_DIV_32 0x8
#define APIC_TDR_DIV_64 0x9
#define APIC_TDR_DIV_128 0xA
-#define APIC_EILVT0 0x500
+#define APIC_EFEAT 0x400
+#define APIC_ECTRL 0x410
+#define APIC_EILVTn(n) (0x500 + 0x10 * n)
#define APIC_EILVT_NR_AMD_K8 1 /* # of extended interrupts */
#define APIC_EILVT_NR_AMD_10H 4
#define APIC_EILVT_LVTOFF(x) (((x) >> 4) & 0xF)
#define APIC_EILVT_MSG_NMI 0x4
#define APIC_EILVT_MSG_EXT 0x7
#define APIC_EILVT_MASKED (1 << 16)
-#define APIC_EILVT1 0x510
-#define APIC_EILVT2 0x520
-#define APIC_EILVT3 0x530
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
#define APIC_BASE_MSR 0x800
#ifdef __KERNEL__
+#include <asm/page_types.h>
+
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+ (CONFIG_PHYSICAL_ALIGN - 1)) \
& ~(CONFIG_PHYSICAL_ALIGN - 1))
+/* Minimum kernel alignment, as a power of two */
+#ifdef CONFIG_x86_64
+#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
+#else
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#endif
+#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
+
+#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
+ (CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
+#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+#endif
+
#ifdef CONFIG_KERNEL_BZIP2
#define BOOT_HEAP_SIZE 0x400000
#else /* !CONFIG_KERNEL_BZIP2 */
__u32 ramdisk_size;
__u32 bootsect_kludge;
__u16 heap_end_ptr;
- __u16 _pad1;
+ __u8 ext_loader_ver;
+ __u8 ext_loader_type;
__u32 cmd_line_ptr;
__u32 initrd_addr_max;
__u32 kernel_alignment;
#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */
#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Exception */
#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */
#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */
* CPUID levels like 0x6, 0xA etc
*/
#define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */
+#define X86_FEATURE_ARAT (7*32+ 1) /* Always Running APIC Timer */
/* Virtualization flags: Linux defined */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
#define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability))
#define setup_clear_cpu_cap(bit) do { \
clear_cpu_cap(&boot_cpu_data, bit); \
- set_bit(bit, (unsigned long *)cleared_cpu_caps); \
+ set_bit(bit, (unsigned long *)cpu_caps_cleared); \
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
- clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
+ set_bit(bit, (unsigned long *)cpu_caps_set); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
struct gdt_page {
struct desc_struct gdt[GDT_ENTRIES];
} __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
+DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page);
static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
{
void __native_set_fixmap(enum fixed_addresses idx, pte_t pte);
void native_set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags);
+ phys_addr_t phys, pgprot_t flags);
#ifndef CONFIG_PARAVIRT
static inline void __set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags)
+ phys_addr_t phys, pgprot_t flags)
{
native_set_fixmap(idx, phys, flags);
}
#endif
} ____cacheline_aligned irq_cpustat_t;
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
#define MAX_HARDIRQS_PER_CPU NR_VECTORS
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+ int ioapic, int ioapic_pin,
+ int trigger, int polarity)
+{
+ irq_attr->ioapic = ioapic;
+ irq_attr->ioapic_pin = ioapic_pin;
+ irq_attr->trigger = trigger;
+ irq_attr->polarity = polarity;
+}
+
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ struct io_apic_irq_attr *irq_attr);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
extern void mask_8259A(void);
extern void unmask_8259A(void);
-#ifdef CONFIG_X86_32
-extern void init_ISA_irqs(void);
-#endif
-
#endif /* _ASM_X86_I8259_H */
*/
extern void early_ioremap_init(void);
extern void early_ioremap_reset(void);
-extern void __iomem *early_ioremap(unsigned long offset, unsigned long size);
-extern void __iomem *early_memremap(unsigned long offset, unsigned long size);
+extern void __iomem *early_ioremap(resource_size_t phys_addr,
+ unsigned long size);
+extern void __iomem *early_memremap(resource_size_t phys_addr,
+ unsigned long size);
extern void early_iounmap(void __iomem *addr, unsigned long size);
#define IO_SPACE_LIMIT 0xffff
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
- int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
-#ifdef CONFIG_X86_64
extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
-extern void reinit_intr_remapped_IO_APIC(int intr_remapping,
- struct IO_APIC_route_entry **ioapic_entries);
-#endif
extern void probe_nr_irqs_gsi(void);
#ifndef _ASM_X86_IRQ_REMAPPING_H
#define _ASM_X86_IRQ_REMAPPING_H
-#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
#endif /* _ASM_X86_IRQ_REMAPPING_H */
#ifdef CONFIG_X86_32
# define SYSCALL_VECTOR 0x80
+# define IA32_SYSCALL_VECTOR 0x80
#else
# define IA32_SYSCALL_VECTOR 0x80
#endif
#define LHCALL_FLUSH_ASYNC 0
#define LHCALL_LGUEST_INIT 1
#define LHCALL_SHUTDOWN 2
-#define LHCALL_LOAD_GDT 3
#define LHCALL_NEW_PGTABLE 4
#define LHCALL_FLUSH_TLB 5
#define LHCALL_LOAD_IDT_ENTRY 6
#define LHCALL_SET_PMD 15
#define LHCALL_LOAD_TLS 16
#define LHCALL_NOTIFY 17
+#define LHCALL_LOAD_GDT_ENTRY 18
#define LGUEST_TRAP_ENTRY 0x1F
enum mcp_flags {
MCP_TIMESTAMP = (1 << 0), /* log time stamp */
MCP_UC = (1 << 1), /* log uncorrected errors */
+ MCP_DONTLOG = (1 << 2), /* only clear, don't log */
};
extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
#ifdef CONFIG_X86_MPPARSE
extern void find_smp_config(void);
extern void early_reserve_e820_mpc_new(void);
+extern int enable_update_mptable;
#else
static inline void find_smp_config(void) { }
static inline void early_reserve_e820_mpc_new(void) { }
+#define enable_update_mptable 0
#endif
void __cpuinit generic_processor_info(int apicid, int version);
extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
-extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+struct device;
+extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
+ int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity);
extern int mp_find_ioapic(int gsi);
extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
- return 0;
-}
#endif
#else /* !CONFIG_ACPI: */
static inline int acpi_probe_gsi(void)
*/
#define __PAGE_OFFSET _AC(0xffff880000000000, UL)
-#define __PHYSICAL_START CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN 0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
+#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \
+ (CONFIG_PHYSICAL_ALIGN - 1)) & \
+ ~(CONFIG_PHYSICAL_ALIGN - 1))
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
/* Sometimes the physical address is a pfn, and sometimes its
an mfn. We can tell which is which from the index. */
void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
- unsigned long phys, pgprot_t flags);
+ phys_addr_t phys, pgprot_t flags);
};
struct raw_spinlock;
void arch_flush_lazy_mmu_mode(void);
static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
- unsigned long phys, pgprot_t flags)
+ phys_addr_t phys, pgprot_t flags)
{
pv_mmu_ops.set_fixmap(idx, phys, flags);
}
#define paravirt_nop ((void *)_paravirt_nop)
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
{
extern int kernel_map_sync_memtype(u64 base, unsigned long size,
unsigned long flag);
-extern void map_devmem(unsigned long pfn, unsigned long size,
- struct pgprot vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
- struct pgprot vma_prot);
#endif /* _ASM_X86_PAT_H */
case 1: \
asm(op "b %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "qi" ((T__)(val))); \
break; \
case 2: \
asm(op "w %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "ri" ((T__)(val))); \
break; \
case 4: \
asm(op "l %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "ri" ((T__)(val))); \
break; \
case 8: \
asm(op "q %1,"__percpu_arg(0) \
: "+m" (var) \
- : "re" ((T__)val)); \
+ : "re" ((T__)(val))); \
break; \
default: __bad_percpu_size(); \
} \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(1)",%0" \
- : "=r" (ret__) \
+ : "=q" (ret__) \
: "m" (var)); \
break; \
case 2: \
extern struct cpuinfo_x86 new_cpu_data;
extern struct tss_struct doublefault_tss;
-extern __u32 cleared_cpu_caps[NCAPINTS];
+extern __u32 cpu_caps_cleared[NCAPINTS];
+extern __u32 cpu_caps_set[NCAPINTS];
#ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
#define cpu_data(cpu) per_cpu(cpu_info, cpu)
#define current_cpu_data __get_cpu_var(cpu_info)
#else
} ____cacheline_aligned;
-DECLARE_PER_CPU(struct tss_struct, init_tss);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss);
/*
* Save the original ist values for checking stack pointers during debugging
u32 entry_eip;
};
+struct ymmh_struct {
+ /* 16 * 16 bytes for each YMMH-reg = 256 bytes */
+ u32 ymmh_space[64];
+};
+
struct xsave_hdr_struct {
u64 xstate_bv;
u64 reserved1[2];
struct xsave_struct {
struct i387_fxsave_struct i387;
struct xsave_hdr_struct xsave_hdr;
+ struct ymmh_struct ymmh;
/* new processor state extensions will go here */
} __attribute__ ((packed, aligned (64)));
};
};
-DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union);
DECLARE_INIT_PER_CPU(irq_stack_union);
DECLARE_PER_CPU(char *, irq_stack_ptr);
unsigned short fsindex;
unsigned short gsindex;
#endif
+#ifdef CONFIG_X86_32
unsigned long ip;
+#endif
+#ifdef CONFIG_X86_64
unsigned long fs;
+#endif
unsigned long gs;
/* Hardware debugging registers: */
unsigned long debugreg0;
/* Boot loader type from the setup header: */
extern int bootloader_type;
+extern int bootloader_version;
extern char ignore_fpu_irq;
.vm86_info = NULL, \
.sysenter_cs = __KERNEL_CS, \
.io_bitmap_ptr = NULL, \
- .fs = __KERNEL_PERCPU, \
}
/*
/*
* X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps. So regs will be the current sp.
+ * when it traps. The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'.
*
* This is valid only for kernel mode traps.
*/
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
{
#ifdef CONFIG_X86_32
- return (unsigned long)regs;
+ return (unsigned long)(®s->sp);
#else
return regs->sp;
#endif
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
-#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
+#define NEED_PGE 0
#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
int (*setup_ioapic_ids)(void);
};
-extern void x86_quirk_pre_intr_init(void);
extern void x86_quirk_intr_init(void);
extern void x86_quirk_trap_init(void);
__u64 reserved2[5];
};
+struct _ymmh_state {
+ /* 16 * 16 bytes for each YMMH-reg */
+ __u32 ymmh_space[64];
+};
+
/*
* Extended state pointed by the fpstate pointer in the sigcontext.
* In addition to the fpstate, information encoded in the xstate_hdr
struct _xstate {
struct _fpstate fpstate;
struct _xsave_hdr xstate_hdr;
+ struct _ymmh_state ymmh;
/* new processor state extensions go here */
};
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
+ return GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
}
#endif
return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
}
-#ifndef CONFIG_PARAVIRT
+#ifndef CONFIG_PARAVIRT_SPINLOCKS
static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
{
__raw_spin_lock(lock);
}
-#endif
+#endif /* CONFIG_PARAVIRT_SPINLOCKS */
static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
{
struct mm_struct *active_mm;
int state;
};
-DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
static inline void reset_lazy_tlbstate(void)
{
}
struct pci_bus;
-void set_pci_bus_resources_arch_default(struct pci_bus *b);
+void x86_pci_root_bus_res_quirks(struct pci_bus *b);
#ifdef CONFIG_SMP
-#define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)
+#define mc_capable() ((boot_cpu_data.x86_max_cores > 1) && \
+ (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids))
#define smt_capable() (smp_num_siblings > 1)
#endif
/* ========================================================================= */
/* UVH_BAU_DATA_CONFIG */
/* ========================================================================= */
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
+/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */
#define UVH_BAU_DATA_CONFIG 0x61680UL
#define UVH_BAU_DATA_CONFIG_32 0x0438
/* VIRT <-> MACHINE conversion */
#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define virt_to_pfn(v) (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v)))
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
static inline unsigned long pte_mfn(pte_t pte)
#define XSTATE_FP 0x1
#define XSTATE_SSE 0x2
+#define XSTATE_YMM 0x4
#define XSTATE_FPSSE (XSTATE_FP | XSTATE_SSE)
/*
* These are the features that the OS can handle currently.
*/
-#define XCNTXT_MASK (XSTATE_FP | XSTATE_SSE)
+#define XCNTXT_MASK (XSTATE_FP | XSTATE_SSE | XSTATE_YMM)
#ifdef CONFIG_X86_64
#define REX_PREFIX "0x48, "
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y += setup.o i8259.o irqinit_$(BITS).o
+obj-y += setup.o i8259.o irqinit.o
obj-$(CONFIG_X86_VISWS) += visws_quirks.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
-obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
+obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
#endif
static struct {
- int apic_id;
int gsi_base;
int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];
int mp_find_ioapic(int gsi)
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
mp_ioapics[idx].apicver = io_apic_get_version(idx);
-#else
- mp_ioapics[idx].apicver = 0;
-#endif
+
/*
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
}
}
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
int ioapic;
- int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
+ u8 pin;
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ int ioapic;
+ int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
return gsi;
}
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
- return gsi;
-#endif
- }
-
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
+ if (enable_update_mptable)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
- if (!acpi_ioapic)
- return 0;
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
+ return gsi;
}
/*
#define IVHD_DEV_EXT_SELECT 0x46
#define IVHD_DEV_EXT_SELECT_RANGE 0x47
-#define IVHD_FLAG_HT_TUN_EN 0x00
-#define IVHD_FLAG_PASSPW_EN 0x01
-#define IVHD_FLAG_RESPASSPW_EN 0x02
-#define IVHD_FLAG_ISOC_EN 0x03
+#define IVHD_FLAG_HT_TUN_EN_MASK 0x01
+#define IVHD_FLAG_PASSPW_EN_MASK 0x02
+#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04
+#define IVHD_FLAG_ISOC_EN_MASK 0x08
#define IVMD_FLAG_EXCL_RANGE 0x08
#define IVMD_FLAG_UNITY_MAP 0x01
* First set the recommended feature enable bits from ACPI
* into the IOMMU control registers
*/
- h->flags & IVHD_FLAG_HT_TUN_EN ?
+ h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
- h->flags & IVHD_FLAG_PASSPW_EN ?
+ h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
- h->flags & IVHD_FLAG_RESPASSPW_EN ?
+ h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
- h->flags & IVHD_FLAG_ISOC_EN ?
+ h->flags & IVHD_FLAG_ISOC_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
iommu_feature_disable(iommu, CONTROL_ISOC_EN);
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
+/*
+ * Handle interrupt mode configuration register (IMCR).
+ * This register controls whether the interrupt signals
+ * that reach the BSP come from the master PIC or from the
+ * local APIC. Before entering Symmetric I/O Mode, either
+ * the BIOS or the operating system must switch out of
+ * PIC Mode by changing the IMCR.
+ */
+static inline void imcr_pic_to_apic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go through APIC */
+ outb(0x01, 0x23);
+}
+
+static inline void imcr_apic_to_pic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go directly to BSP */
+ outb(0x00, 0x23);
+}
#endif
#ifdef CONFIG_X86_64
__setup("apicpmtimer", setup_apicpmtimer);
#endif
+int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
-int x2apic;
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
+ if (x2apic_enabled()) {
+ pr_warning("Bios already enabled x2apic, "
+ "can't enforce nox2apic");
+ return 0;
+ }
+
disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
return lapic_get_version() >= 0x14;
}
+/*
+ * bare function to substitute write operation
+ * and it's _that_ fast :)
+ */
+static void native_apic_write_dummy(u32 reg, u32 v)
+{
+ WARN_ON_ONCE((cpu_has_apic || !disable_apic));
+}
+
+static u32 native_apic_read_dummy(u32 reg)
+{
+ WARN_ON_ONCE((cpu_has_apic && !disable_apic));
+ return 0;
+}
+
+/*
+ * right after this call apic->write/read doesn't do anything
+ * note that there is no restore operation it works one way
+ */
+void apic_disable(void)
+{
+ apic->read = native_apic_read_dummy;
+ apic->write = native_apic_write_dummy;
+}
+
void native_apic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
{
- unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0);
unsigned int v = (mask << 16) | (msg_type << 8) | vector;
apic_write(reg, v);
{
struct clock_event_device *levt = &__get_cpu_var(lapic_events);
+ if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) {
+ lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
+ /* Make LAPIC timer preferrable over percpu HPET */
+ lapic_clockevent.rating = 150;
+ }
+
memcpy(levt, &lapic_clockevent, sizeof(*levt));
levt->cpumask = cpumask_of(smp_processor_id());
u32 v;
/* APIC hasn't been mapped yet */
- if (!x2apic && !apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
maxlvt = lapic_get_maxlvt();
{
if (x2apic_enabled()) {
pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
- x2apic_preenabled = x2apic = 1;
+ x2apic_preenabled = x2apic_mode = 1;
}
}
{
int msr, msr2;
- if (!x2apic)
+ if (!x2apic_mode)
return;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
}
}
+#endif /* CONFIG_X86_X2APIC */
void __init enable_IR_x2apic(void)
{
unsigned long flags;
struct IO_APIC_route_entry **ioapic_entries = NULL;
- if (!cpu_has_x2apic)
- return;
-
- if (!x2apic_preenabled && disable_x2apic) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of nox2apic\n");
- return;
+ ret = dmar_table_init();
+ if (ret) {
+ pr_debug("dmar_table_init() failed with %d:\n", ret);
+ goto ir_failed;
}
- if (x2apic_preenabled && disable_x2apic)
- panic("Bios already enabled x2apic, can't enforce nox2apic");
-
- if (!x2apic_preenabled && skip_ioapic_setup) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of skipping io-apic setup\n");
- return;
+ if (!intr_remapping_supported()) {
+ pr_debug("intr-remapping not supported\n");
+ goto ir_failed;
}
- ret = dmar_table_init();
- if (ret) {
- pr_info("dmar_table_init() failed with %d:\n", ret);
- if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
- else
- pr_info("Not enabling x2apic,Intr-remapping\n");
+ if (!x2apic_preenabled && skip_ioapic_setup) {
+ pr_info("Skipped enabling intr-remap because of skipping "
+ "io-apic setup\n");
return;
}
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (ret && x2apic_preenabled) {
- local_irq_restore(flags);
- panic("x2apic enabled by bios. But IR enabling failed");
- }
-
+ ret = enable_intr_remapping(x2apic_supported());
if (ret)
goto end_restore;
- if (!x2apic) {
- x2apic = 1;
+ pr_info("Enabled Interrupt-remapping\n");
+
+ if (x2apic_supported() && !x2apic_mode) {
+ x2apic_mode = 1;
enable_x2apic();
+ pr_info("Enabled x2apic\n");
}
end_restore:
* IR enabling failed
*/
restore_IO_APIC_setup(ioapic_entries);
- else
- reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries);
unmask_8259A();
local_irq_restore(flags);
end:
- if (!ret) {
- if (!x2apic_preenabled)
- pr_info("Enabled x2apic and interrupt-remapping\n");
- else
- pr_info("Enabled Interrupt-remapping\n");
- } else
- pr_err("Failed to enable Interrupt-remapping and x2apic\n");
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
+
+ if (!ret)
+ return;
+
+ir_failed:
+ if (x2apic_preenabled)
+ panic("x2apic enabled by bios. But IR enabling failed");
+ else if (cpu_has_x2apic)
+ pr_info("Not enabling x2apic,Intr-remapping\n");
#else
if (!cpu_has_x2apic)
return;
if (x2apic_preenabled)
panic("x2apic enabled prior OS handover,"
- " enable CONFIG_INTR_REMAP");
-
- pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
- " and x2apic\n");
+ " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
#endif
return;
}
-#endif /* CONFIG_X86_X2APIC */
+
#ifdef CONFIG_X86_64
/*
}
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
- boot_cpu_physical_apicid = 0;
return 0;
}
#else
*/
void __init init_apic_mappings(void)
{
- if (x2apic) {
+ unsigned int new_apicid;
+
+ if (x2apic_mode) {
boot_cpu_physical_apicid = read_apic_id();
return;
}
- /*
- * If no local APIC can be found then set up a fake all
- * zeroes page to simulate the local APIC and another
- * one for the IO-APIC.
- */
+ /* If no local APIC can be found return early */
if (!smp_found_config && detect_init_APIC()) {
- apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
- apic_phys = __pa(apic_phys);
- } else
+ /* lets NOP'ify apic operations */
+ pr_info("APIC: disable apic facility\n");
+ apic_disable();
+ } else {
apic_phys = mp_lapic_addr;
- set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
- apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
- APIC_BASE, apic_phys);
+ /*
+ * acpi lapic path already maps that address in
+ * acpi_register_lapic_address()
+ */
+ if (!acpi_lapic)
+ set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+
+ apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
+ APIC_BASE, apic_phys);
+ }
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = read_apic_id();
+ new_apicid = read_apic_id();
+ if (boot_cpu_physical_apicid != new_apicid) {
+ boot_cpu_physical_apicid = new_apicid;
+ /*
+ * yeah -- we lie about apic_version
+ * in case if apic was disabled via boot option
+ * but it's not a problem for SMP compiled kernel
+ * since smp_sanity_check is prepared for such a case
+ * and disable smp mode
+ */
+ apic_version[new_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+ }
}
/*
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
+ imcr_pic_to_apic();
}
#endif
if (apic->enable_apic_mode)
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
+ imcr_apic_to_pic();
return;
}
#endif
local_irq_save(flags);
disable_local_APIC();
-#ifdef CONFIG_INTR_REMAP
+
if (intr_remapping_enabled)
disable_intr_remapping();
-#endif
+
local_irq_restore(flags);
return 0;
}
unsigned int l, h;
unsigned long flags;
int maxlvt;
-
-#ifdef CONFIG_INTR_REMAP
- int ret;
+ int ret = 0;
struct IO_APIC_route_entry **ioapic_entries = NULL;
if (!apic_pm_state.active)
return 0;
local_irq_save(flags);
- if (x2apic) {
+ if (intr_remapping_enabled) {
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
WARN(1, "Alloc ioapic_entries in lapic resume failed.");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto restore;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
WARN(1, "Saving IO-APIC state failed: %d\n", ret);
free_ioapic_entries(ioapic_entries);
- return ret;
+ goto restore;
}
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- enable_x2apic();
}
-#else
- if (!apic_pm_state.active)
- return 0;
- local_irq_save(flags);
- if (x2apic)
+ if (x2apic_mode)
enable_x2apic();
-#endif
-
else {
/*
* Make sure the APICBASE points to the right address
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
-#ifdef CONFIG_INTR_REMAP
- if (intr_remapping_enabled)
- reenable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (x2apic) {
+ if (intr_remapping_enabled) {
+ reenable_intr_remapping(x2apic_mode);
unmask_8259A();
restore_IO_APIC_setup(ioapic_entries);
free_ioapic_entries(ioapic_entries);
}
-#endif
-
+restore:
local_irq_restore(flags);
-
- return 0;
+ return ret;
}
/*
#endif /* CONFIG_PM */
#ifdef CONFIG_X86_64
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
+
+static int __cpuinit apic_cluster_num(void)
{
int i, clusters, zeros;
unsigned id;
u16 *bios_cpu_apicid;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /*
- * there is not this kind of box with AMD CPU yet.
- * Some AMD box with quadcore cpu and 8 sockets apicid
- * will be [4, 0x23] or [8, 0x27] could be thought to
- * vsmp box still need checking...
- */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
- return 0;
-
bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
++zeros;
}
- /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
- * not guaranteed to be synced between boards
- */
- if (is_vsmp_box() && clusters > 1)
+ return clusters;
+}
+
+static int __cpuinitdata multi_checked;
+static int __cpuinitdata multi;
+
+static int __cpuinit set_multi(const struct dmi_system_id *d)
+{
+ if (multi)
+ return 0;
+ pr_info("APIC: %s detected, Multi Chassis\n", d->ident);
+ multi = 1;
+ return 0;
+}
+
+static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = {
+ {
+ .callback = set_multi,
+ .ident = "IBM System Summit2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"),
+ },
+ },
+ {}
+};
+
+static void __cpuinit dmi_check_multi(void)
+{
+ if (multi_checked)
+ return;
+
+ dmi_check_system(multi_dmi_table);
+ multi_checked = 1;
+}
+
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis.
+ * Use DMI to check them
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+ dmi_check_multi();
+ if (multi)
return 1;
+ if (!is_vsmp_box())
+ return 0;
+
/*
- * If clusters > 2, then should be multi-chassis.
- * May have to revisit this when multi-core + hyperthreaded CPUs come
- * out, but AFAIK this will work even for them.
+ * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+ * not guaranteed to be synced between boards
*/
- return (clusters > 2);
+ if (apic_cluster_num() > 1)
+ return 1;
+
+ return 0;
}
#endif
static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
{
- return hard_smp_processor_id() >> index_msb;
+ return initial_apic_id >> index_msb;
}
struct apic apic_flat = {
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = NULL,
+ .inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
- if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = NULL,
+ .inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
return gsi;
}
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
+static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
{
unsigned long vect = 0, psaival = 0;
}
#ifdef CONFIG_ACPI
-static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
{
struct acpi_table_header *header = NULL;
struct es7000_oem_table *table;
return 0;
}
-static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
{
if (!oem_addr)
return;
static int es7000_acpi_ret;
/* Hook from generic ACPI tables.c */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
unsigned long oem_addr = 0;
int check_dsdt;
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
-struct apic apic_es7000 = {
+struct apic __refdata apic_es7000 = {
.name = "es7000",
.probe = probe_es7000,
struct irq_pin_list *next;
};
-static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
+static struct irq_pin_list *get_one_free_irq_2_pin(int node)
{
struct irq_pin_list *pin;
- int node;
-
- node = cpu_to_node(cpu);
pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
unsigned move_cleanup_count;
u8 vector;
u8 move_in_progress : 1;
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- u8 move_desc_pending : 1;
-#endif
};
/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
return cfg;
}
-static struct irq_cfg *get_one_free_irq_cfg(int cpu)
+static struct irq_cfg *get_one_free_irq_cfg(int node)
{
struct irq_cfg *cfg;
- int node;
-
- node = cpu_to_node(cpu);
cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
if (cfg) {
return cfg;
}
-int arch_init_chip_data(struct irq_desc *desc, int cpu)
+int arch_init_chip_data(struct irq_desc *desc, int node)
{
struct irq_cfg *cfg;
cfg = desc->chip_data;
if (!cfg) {
- desc->chip_data = get_one_free_irq_cfg(cpu);
+ desc->chip_data = get_one_free_irq_cfg(node);
if (!desc->chip_data) {
printk(KERN_ERR "can not alloc irq_cfg\n");
BUG_ON(1);
return 0;
}
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-
+/* for move_irq_desc */
static void
-init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
+init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int node)
{
struct irq_pin_list *old_entry, *head, *tail, *entry;
if (!old_entry)
return;
- entry = get_one_free_irq_2_pin(cpu);
+ entry = get_one_free_irq_2_pin(node);
if (!entry)
return;
tail = entry;
old_entry = old_entry->next;
while (old_entry) {
- entry = get_one_free_irq_2_pin(cpu);
+ entry = get_one_free_irq_2_pin(node);
if (!entry) {
entry = head;
while (entry) {
}
void arch_init_copy_chip_data(struct irq_desc *old_desc,
- struct irq_desc *desc, int cpu)
+ struct irq_desc *desc, int node)
{
struct irq_cfg *cfg;
struct irq_cfg *old_cfg;
- cfg = get_one_free_irq_cfg(cpu);
+ cfg = get_one_free_irq_cfg(node);
if (!cfg)
return;
memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
- init_copy_irq_2_pin(old_cfg, cfg, cpu);
+ init_copy_irq_2_pin(old_cfg, cfg, node);
}
static void free_irq_cfg(struct irq_cfg *old_cfg)
old_desc->chip_data = NULL;
}
}
-
-static void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg = desc->chip_data;
-
- if (!cfg->move_in_progress) {
- /* it means that domain is not changed */
- if (!cpumask_intersects(desc->affinity, mask))
- cfg->move_desc_pending = 1;
- }
-}
-#endif
+/* end for move_irq_desc */
#else
static struct irq_cfg *irq_cfg(unsigned int irq)
#endif
-#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
-static inline void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-}
-#endif
-
struct io_apic {
unsigned int index;
unsigned int unused[3];
spin_unlock_irqrestore(&ioapic_lock, flags);
}
-#ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
-{
- cpumask_var_t cleanup_mask;
-
- if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
- unsigned int i;
- cfg->move_cleanup_count = 0;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- cfg->move_cleanup_count++;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
- } else {
- cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
- cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
- apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
- free_cpumask_var(cleanup_mask);
- }
- cfg->move_in_progress = 0;
-}
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
- u8 vector = cfg->vector;
-
- entry = cfg->irq_2_pin;
- for (;;) {
- unsigned int reg;
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- /*
- * With interrupt-remapping, destination information comes
- * from interrupt-remapping table entry.
- */
- if (!irq_remapped(irq))
- io_apic_write(apic, 0x11 + pin*2, dest);
- reg = io_apic_read(apic, 0x10 + pin*2);
- reg &= ~IO_APIC_REDIR_VECTOR_MASK;
- reg |= vector;
- io_apic_modify(apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = entry->next;
- }
-}
-
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
-/*
- * Either sets desc->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
- * leaves desc->affinity untouched.
- */
-static unsigned int
-set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg;
- unsigned int irq;
-
- if (!cpumask_intersects(mask, cpu_online_mask))
- return BAD_APICID;
-
- irq = desc->irq;
- cfg = desc->chip_data;
- if (assign_irq_vector(irq, cfg, mask))
- return BAD_APICID;
-
- /* check that before desc->addinity get updated */
- set_extra_move_desc(desc, mask);
-
- cpumask_copy(desc->affinity, mask);
-
- return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
-}
-
-static void
-set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- unsigned int dest;
- unsigned int irq;
-
- irq = desc->irq;
- cfg = desc->chip_data;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- dest = set_desc_affinity(desc, mask);
- if (dest != BAD_APICID) {
- /* Only the high 8 bits are valid. */
- dest = SET_APIC_LOGICAL_ID(dest);
- __target_IO_APIC_irq(irq, dest, cfg);
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void
-set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
-{
- struct irq_desc *desc;
-
- desc = irq_to_desc(irq);
-
- set_ioapic_affinity_irq_desc(desc, mask);
-}
-#endif /* CONFIG_SMP */
-
/*
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
{
struct irq_pin_list *entry;
entry = cfg->irq_2_pin;
if (!entry) {
- entry = get_one_free_irq_2_pin(cpu);
+ entry = get_one_free_irq_2_pin(node);
if (!entry) {
printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
apic, pin);
entry = entry->next;
}
- entry->next = get_one_free_irq_2_pin(cpu);
+ entry->next = get_one_free_irq_2_pin(node);
entry = entry->next;
entry->apic = apic;
entry->pin = pin;
/*
* Reroute an IRQ to a different pin.
*/
-static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
+static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
int oldapic, int oldpin,
int newapic, int newpin)
{
/* why? call replace before add? */
if (!replaced)
- add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
+ add_pin_to_irq_node(cfg, node, newapic, newpin);
}
static inline void io_apic_modify_irq(struct irq_cfg *cfg,
__setup("pirq=", ioapic_pirq_setup);
#endif /* CONFIG_X86_32 */
-#ifdef CONFIG_INTR_REMAP
struct IO_APIC_route_entry **alloc_ioapic_entries(void)
{
int apic;
return 0;
}
-void reinit_intr_remapped_IO_APIC(int intr_remapping,
- struct IO_APIC_route_entry **ioapic_entries)
-
-{
- /*
- * for now plain restore of previous settings.
- * TBD: In the case of OS enabling interrupt-remapping,
- * IO-APIC RTE's need to be setup to point to interrupt-remapping
- * table entries. for now, do a plain restore, and wait for
- * the setup_IO_APIC_irqs() to do proper initialization.
- */
- restore_IO_APIC_setup(ioapic_entries);
-}
-
void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries)
{
int apic;
kfree(ioapic_entries);
}
-#endif
/*
* Find the IRQ entry number of a certain pin.
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ struct io_apic_irq_attr *irq_attr)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
ioapic_write_entry(apic_id, pin, entry);
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
static void __init setup_IO_APIC_irqs(void)
{
- int apic_id, pin, idx, irq;
+ int apic_id = 0, pin, idx, irq;
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
- int cpu = boot_cpu_id;
+ int node = cpu_to_node(boot_cpu_id);
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
- for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
- for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
-
- idx = find_irq_entry(apic_id, pin, mp_INT);
- if (idx == -1) {
- if (!notcon) {
- notcon = 1;
- apic_printk(APIC_VERBOSE,
- KERN_DEBUG " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- } else
- apic_printk(APIC_VERBOSE, " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- continue;
- }
- if (notcon) {
- apic_printk(APIC_VERBOSE,
- " (apicid-pin) not connected\n");
- notcon = 0;
- }
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ apic_id = mp_find_ioapic(0);
+ if (apic_id < 0)
+ apic_id = 0;
+ }
+#endif
- irq = pin_2_irq(idx, apic_id, pin);
+ for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1) {
+ if (!notcon) {
+ notcon = 1;
+ apic_printk(APIC_VERBOSE,
+ KERN_DEBUG " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ } else
+ apic_printk(APIC_VERBOSE, " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ continue;
+ }
+ if (notcon) {
+ apic_printk(APIC_VERBOSE,
+ " (apicid-pin) not connected\n");
+ notcon = 0;
+ }
- /*
- * Skip the timer IRQ if there's a quirk handler
- * installed and if it returns 1:
- */
- if (apic->multi_timer_check &&
- apic->multi_timer_check(apic_id, irq))
- continue;
+ irq = pin_2_irq(idx, apic_id, pin);
- desc = irq_to_desc_alloc_cpu(irq, cpu);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc for %d\n", irq);
- continue;
- }
- cfg = desc->chip_data;
- add_pin_to_irq_cpu(cfg, cpu, apic_id, pin);
+ /*
+ * Skip the timer IRQ if there's a quirk handler
+ * installed and if it returns 1:
+ */
+ if (apic->multi_timer_check &&
+ apic->multi_timer_check(apic_id, irq))
+ continue;
- setup_IO_APIC_irq(apic_id, pin, irq, desc,
- irq_trigger(idx), irq_polarity(idx));
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ continue;
}
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+ /*
+ * don't mark it in pin_programmed, so later acpi could
+ * set it correctly when irq < 16
+ */
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
}
if (notcon)
__apicdebuginit(void) print_local_APIC(void *dummy)
{
- unsigned int v, ver, maxlvt;
+ unsigned int i, v, ver, maxlvt;
u64 icr;
if (apic_verbosity == APIC_QUIET)
printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
v = apic_read(APIC_TDCR);
printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+
+ if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
+ v = apic_read(APIC_EFEAT);
+ maxlvt = (v >> 16) & 0xff;
+ printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v);
+ v = apic_read(APIC_ECTRL);
+ printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v);
+ for (i = 0; i < maxlvt; i++) {
+ v = apic_read(APIC_EILVTn(i));
+ printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
+ }
+ }
printk("\n");
}
__apicdebuginit(int) print_all_ICs(void)
{
print_PIC();
+
+ /* don't print out if apic is not there */
+ if (!cpu_has_apic || disable_apic)
+ return 0;
+
print_all_local_APICs();
print_IO_APIC();
*/
#ifdef CONFIG_SMP
+static void send_cleanup_vector(struct irq_cfg *cfg)
+{
+ cpumask_var_t cleanup_mask;
+
+ if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
+ unsigned int i;
+ cfg->move_cleanup_count = 0;
+ for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ cfg->move_cleanup_count++;
+ for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
+ } else {
+ cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+ cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
+ apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ free_cpumask_var(cleanup_mask);
+ }
+ cfg->move_in_progress = 0;
+}
+
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+ u8 vector = cfg->vector;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+ unsigned int reg;
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ /*
+ * With interrupt-remapping, destination information comes
+ * from interrupt-remapping table entry.
+ */
+ if (!irq_remapped(irq))
+ io_apic_write(apic, 0x11 + pin*2, dest);
+ reg = io_apic_read(apic, 0x10 + pin*2);
+ reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+ reg |= vector;
+ io_apic_modify(apic, 0x10 + pin*2, reg);
+ if (!entry->next)
+ break;
+ entry = entry->next;
+ }
+}
+
+static int
+assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
+
+/*
+ * Either sets desc->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
+ * leaves desc->affinity untouched.
+ */
+static unsigned int
+set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
+{
+ struct irq_cfg *cfg;
+ unsigned int irq;
+
+ if (!cpumask_intersects(mask, cpu_online_mask))
+ return BAD_APICID;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+ if (assign_irq_vector(irq, cfg, mask))
+ return BAD_APICID;
+
+ cpumask_copy(desc->affinity, mask);
+
+ return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
+}
+
+static int
+set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int dest;
+ unsigned int irq;
+ int ret = -1;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ dest = set_desc_affinity(desc, mask);
+ if (dest != BAD_APICID) {
+ /* Only the high 8 bits are valid. */
+ dest = SET_APIC_LOGICAL_ID(dest);
+ __target_IO_APIC_irq(irq, dest, cfg);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return ret;
+}
+
+static int
+set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
+{
+ struct irq_desc *desc;
+
+ desc = irq_to_desc(irq);
+
+ return set_ioapic_affinity_irq_desc(desc, mask);
+}
+
+#ifdef CONFIG_INTR_REMAP
-#ifdef CONFIG_INTR_REMAP
-
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
* Real vector that is used for interrupting cpu will be coming from
* the interrupt-remapping table entry.
*/
-static void
+static int
migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
{
struct irq_cfg *cfg;
struct irte irte;
unsigned int dest;
unsigned int irq;
+ int ret = -1;
if (!cpumask_intersects(mask, cpu_online_mask))
- return;
+ return ret;
irq = desc->irq;
if (get_irte(irq, &irte))
- return;
+ return ret;
cfg = desc->chip_data;
if (assign_irq_vector(irq, cfg, mask))
- return;
-
- set_extra_move_desc(desc, mask);
+ return ret;
dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
send_cleanup_vector(cfg);
cpumask_copy(desc->affinity, mask);
+
+ return 0;
}
/*
* Migrates the IRQ destination in the process context.
*/
-static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+static int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
const struct cpumask *mask)
{
- migrate_ioapic_irq_desc(desc, mask);
+ return migrate_ioapic_irq_desc(desc, mask);
}
-static void set_ir_ioapic_affinity_irq(unsigned int irq,
+static int set_ir_ioapic_affinity_irq(unsigned int irq,
const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
- set_ir_ioapic_affinity_irq_desc(desc, mask);
+ return set_ir_ioapic_affinity_irq_desc(desc, mask);
}
#else
-static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+static inline int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
const struct cpumask *mask)
{
+ return 0;
}
#endif
struct irq_cfg *cfg = desc->chip_data;
unsigned vector, me;
- if (likely(!cfg->move_in_progress)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- if (likely(!cfg->move_desc_pending))
- return;
-
- /* domain has not changed, but affinity did */
- me = smp_processor_id();
- if (cpumask_test_cpu(me, desc->affinity)) {
- *descp = desc = move_irq_desc(desc, me);
- /* get the new one */
- cfg = desc->chip_data;
- cfg->move_desc_pending = 0;
- }
-#endif
+ if (likely(!cfg->move_in_progress))
return;
- }
vector = ~get_irq_regs()->orig_ax;
me = smp_processor_id();
- if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- *descp = desc = move_irq_desc(desc, me);
- /* get the new one */
- cfg = desc->chip_data;
-#endif
+ if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
send_cleanup_vector(cfg);
- }
}
#else
static inline void irq_complete_move(struct irq_desc **descp) {}
#endif
-#ifdef CONFIG_X86_X2APIC
-static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
-
- entry = cfg->irq_2_pin;
- for (;;) {
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- io_apic_eoi(apic, pin);
- entry = entry->next;
- }
-}
-
-static void
-eoi_ioapic_irq(struct irq_desc *desc)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- unsigned int irq;
-
- irq = desc->irq;
- cfg = desc->chip_data;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __eoi_ioapic_irq(irq, cfg);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void ack_x2apic_level(unsigned int irq)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- ack_x2APIC_irq();
- eoi_ioapic_irq(desc);
-}
-
-static void ack_x2apic_edge(unsigned int irq)
-{
- ack_x2APIC_irq();
-}
-#endif
-
static void ack_apic_edge(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
}
#ifdef CONFIG_INTR_REMAP
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ io_apic_eoi(apic, pin);
+ entry = entry->next;
+ }
+}
+
+static void
+eoi_ioapic_irq(struct irq_desc *desc)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int irq;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __eoi_ioapic_irq(irq, cfg);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
static void ir_ack_apic_edge(unsigned int irq)
{
-#ifdef CONFIG_X86_X2APIC
- if (x2apic_enabled())
- return ack_x2apic_edge(irq);
-#endif
- return ack_apic_edge(irq);
+ ack_APIC_irq();
}
static void ir_ack_apic_level(unsigned int irq)
{
-#ifdef CONFIG_X86_X2APIC
- if (x2apic_enabled())
- return ack_x2apic_level(irq);
-#endif
- return ack_apic_level(irq);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ ack_APIC_irq();
+ eoi_ioapic_irq(desc);
}
#endif /* CONFIG_INTR_REMAP */
{
struct irq_desc *desc = irq_to_desc(0);
struct irq_cfg *cfg = desc->chip_data;
- int cpu = boot_cpu_id;
+ int node = cpu_to_node(boot_cpu_id);
int apic1, pin1, apic2, pin2;
unsigned long flags;
int no_pin1 = 0;
* Ok, does IRQ0 through the IOAPIC work?
*/
if (no_pin1) {
- add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
+ add_pin_to_irq_node(cfg, node, apic1, pin1);
setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
} else {
/* for edge trigger, setup_IO_APIC_irq already
/*
* legacy devices should be connected to IO APIC #0
*/
- replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
+ replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
enable_8259A_irq(0);
if (timer_irq_works()) {
/*
* Dynamic irq allocate and deallocation
*/
-unsigned int create_irq_nr(unsigned int irq_want)
+unsigned int create_irq_nr(unsigned int irq_want, int node)
{
/* Allocate an unused irq */
unsigned int irq;
unsigned int new;
unsigned long flags;
struct irq_cfg *cfg_new = NULL;
- int cpu = boot_cpu_id;
struct irq_desc *desc_new = NULL;
irq = 0;
spin_lock_irqsave(&vector_lock, flags);
for (new = irq_want; new < nr_irqs; new++) {
- desc_new = irq_to_desc_alloc_cpu(new, cpu);
+ desc_new = irq_to_desc_alloc_node(new, node);
if (!desc_new) {
printk(KERN_INFO "can not get irq_desc for %d\n", new);
continue;
if (cfg_new->vector != 0)
continue;
+
+ desc_new = move_irq_desc(desc_new, node);
+
if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
irq = new;
break;
int create_irq(void)
{
+ int node = cpu_to_node(boot_cpu_id);
unsigned int irq_want;
int irq;
irq_want = nr_irqs_gsi;
- irq = create_irq_nr(irq_want);
+ irq = create_irq_nr(irq_want, node);
if (irq == 0)
irq = -1;
}
#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
+static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
write_msi_msg_desc(desc, &msg);
+
+ return 0;
}
#ifdef CONFIG_INTR_REMAP
/*
* Migrate the MSI irq to another cpumask. This migration is
* done in the process context using interrupt-remapping hardware.
*/
-static void
+static int
ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irte irte;
if (get_irte(irq, &irte))
- return;
+ return -1;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
*/
if (cfg->move_in_progress)
send_cleanup_vector(cfg);
+
+ return 0;
}
#endif
unsigned int irq_want;
struct intel_iommu *iommu = NULL;
int index = 0;
+ int node;
/* x86 doesn't support multiple MSI yet */
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
+ node = dev_to_node(&dev->dev);
irq_want = nr_irqs_gsi;
sub_handle = 0;
list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = create_irq_nr(irq_want);
+ irq = create_irq_nr(irq_want, node);
if (irq == 0)
return -1;
irq_want = irq + 1;
#if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP)
#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
dmar_msi_write(irq, &msg);
+
+ return 0;
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_HPET_TIMER
#ifdef CONFIG_SMP
-static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
hpet_msi_write(irq, &msg);
+
+ return 0;
}
#endif /* CONFIG_SMP */
{
int ret;
struct msi_msg msg;
+ struct irq_desc *desc = irq_to_desc(irq);
ret = msi_compose_msg(NULL, irq, &msg);
if (ret < 0)
return ret;
hpet_msi_write(irq, &msg);
+ desc->status |= IRQ_MOVE_PCNTXT;
set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
"edge");
write_ht_irq_msg(irq, &msg);
}
-static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
+static int set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
target_ht_irq(irq, dest, cfg->vector);
+
+ return 0;
}
#endif
unsigned long flags;
int err;
+ BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
cfg = irq_cfg(irq);
err = assign_irq_vector(irq, cfg, eligible_cpu);
mmr_value = 0;
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
- BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
- entry->vector = cfg->vector;
- entry->delivery_mode = apic->irq_delivery_mode;
- entry->dest_mode = apic->irq_dest_mode;
- entry->polarity = 0;
- entry->trigger = 0;
- entry->mask = 0;
- entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
+ entry->vector = cfg->vector;
+ entry->delivery_mode = apic->irq_delivery_mode;
+ entry->dest_mode = apic->irq_dest_mode;
+ entry->polarity = 0;
+ entry->trigger = 0;
+ entry->mask = 0;
+ entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
mmr_pnode = uv_blade_to_pnode(mmr_blade);
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
struct uv_IO_APIC_route_entry *entry;
int mmr_pnode;
+ BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
mmr_value = 0;
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
- BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
entry->mask = 1;
mmr_pnode = uv_blade_to_pnode(mmr_blade);
}
#endif
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+ int ioapic, pin;
+ int trigger, polarity;
+
+ ioapic = irq_attr->ioapic;
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ pin = irq_attr->ioapic_pin;
+ trigger = irq_attr->trigger;
+ polarity = irq_attr->polarity;
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
+
+ return 0;
+}
+
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
+{
+ int ioapic, pin;
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ ioapic = irq_attr->ioapic;
+ pin = irq_attr->ioapic_pin;
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, irq, irq_attr);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
return apic_id;
}
+#endif
int __init io_apic_get_version(int ioapic)
{
return reg_01.bits.version;
}
-#endif
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int cpu = boot_cpu_id;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- desc = irq_to_desc_alloc_cpu(irq, cpu);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
- int pin, ioapic, irq, irq_entry;
+ int pin, ioapic = 0, irq, irq_entry;
struct irq_desc *desc;
- struct irq_cfg *cfg;
const struct cpumask *mask;
if (skip_ioapic_setup == 1)
return;
- for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
- for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
- irq_entry = find_irq_entry(ioapic, pin, mp_INT);
- if (irq_entry == -1)
- continue;
- irq = pin_2_irq(irq_entry, ioapic, pin);
-
- /* setup_IO_APIC_irqs could fail to get vector for some device
- * when you have too many devices, because at that time only boot
- * cpu is online.
- */
- desc = irq_to_desc(irq);
- cfg = desc->chip_data;
- if (!cfg->vector) {
- setup_IO_APIC_irq(ioapic, pin, irq, desc,
- irq_trigger(irq_entry),
- irq_polarity(irq_entry));
- continue;
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ ioapic = 0;
+ }
+#endif
- }
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
- /*
- * Honour affinities which have been set in early boot
- */
- if (desc->status &
- (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
- mask = desc->affinity;
- else
- mask = apic->target_cpus();
+ desc = irq_to_desc(irq);
- if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq_desc(desc, mask);
- else
- set_ioapic_affinity_irq_desc(desc, mask);
- }
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = apic->target_cpus();
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq_desc(desc, mask);
+ else
+ set_ioapic_affinity_irq_desc(desc, mask);
}
+
}
#endif
if (!prev_nmi_count)
goto error;
- alloc_cpumask_var(&backtrace_mask, GFP_KERNEL);
+ alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
printk(KERN_INFO "Testing NMI watchdog ... ");
#ifdef CONFIG_SMP
touched = 1;
}
- if (cpumask_test_cpu(cpu, backtrace_mask)) {
+ /* We can be called before check_nmi_watchdog, hence NULL check. */
+ if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
static DEFINE_SPINLOCK(lock); /* Serialise the printks */
spin_lock(&lock);
void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_X2APIC
- if (x2apic && (apic != &apic_x2apic_phys &&
+ if (x2apic_mode && (apic != &apic_x2apic_phys &&
#ifdef CONFIG_X86_UV
apic != &apic_x2apic_uv_x &&
#endif
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT 4
-#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static const struct cpumask *summit_target_cpus(void)
#include <linux/timer.h>
#include <linux/cpu.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
static enum uv_system_type uv_system_type;
+static int early_get_nodeid(void)
+{
+ union uvh_node_id_u node_id;
+ unsigned long *mmr;
+
+ mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
+ node_id.v = *mmr;
+ early_iounmap(mmr, sizeof(*mmr));
+ return node_id.s.node_id;
+}
+
static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
else if (!strcmp(oem_table_id, "UVX"))
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
+ __get_cpu_var(x2apic_extra_bits) =
+ early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
cpumask_set_cpu(cpu, retmask);
}
-static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
+static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
#ifdef CONFIG_SMP
unsigned long val;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
int max_pnode = 0;
- unsigned long mmr_base, present;
+ unsigned long mmr_base, present, paddr;
+ unsigned short pnode_mask;
map_low_mmrs();
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kmalloc(bytes, GFP_KERNEL);
+ BUG_ON(!uv_blade_info);
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
uv_node_to_blade = kmalloc(bytes, GFP_KERNEL);
+ BUG_ON(!uv_node_to_blade);
memset(uv_node_to_blade, 255, bytes);
bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL);
+ BUG_ON(!uv_cpu_to_blade);
memset(uv_cpu_to_blade, 255, bytes);
blade = 0;
}
}
+ pnode_mask = (1 << n_val) - 1;
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
gnode_upper = (((unsigned long)node_id.s.node_id) &
~((1 << n_val) - 1)) << m_val;
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_cpu_hub_info(cpu)->pnode = pnode;
- uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+ uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
lcpu, blade);
}
+ /* Add blade/pnode info for nodes without cpus */
+ for_each_online_node(nid) {
+ if (uv_node_to_blade[nid] >= 0)
+ continue;
+ paddr = node_start_pfn(nid) << PAGE_SHIFT;
+ paddr = uv_soc_phys_ram_to_gpa(paddr);
+ pnode = (paddr >> m_val) & pnode_mask;
+ blade = boot_pnode_to_blade(pnode);
+ uv_node_to_blade[nid] = blade;
+ }
+
map_gru_high(max_pnode);
map_mmr_high(max_pnode);
map_config_high(max_pnode);
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
+ OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
}
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
+ OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
BLANK();
DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
memcpy(&uv_systab, tab, sizeof(struct uv_systab));
iounmap(tab);
- printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision);
+ printk(KERN_INFO "EFI UV System Table Revision %d\n",
+ uv_systab.revision);
}
#else /* !CONFIG_EFI */
static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
{ X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
+ { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 },
{ 0, 0, 0, 0 }
};
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
int cpu = smp_processor_id();
int node;
- unsigned apicid = hard_smp_processor_id();
+ unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
node = c->phys_proc_id;
if (apicid_to_node[apicid] != NUMA_NO_NODE)
} };
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
+static int __init x86_xsave_setup(char *s)
+{
+ setup_clear_cpu_cap(X86_FEATURE_XSAVE);
+ return 1;
+}
+__setup("noxsave", x86_xsave_setup);
+
#ifdef CONFIG_X86_32
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_serial_nr __cpuinitdata = 1;
return NULL; /* Not found */
}
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+__u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata;
+__u32 cpu_caps_set[NCAPINTS] __cpuinitdata;
void load_percpu_segment(int cpu)
{
if (this_cpu->c_identify)
this_cpu->c_identify(c);
+ /* Clear/Set all flags overriden by options, after probe */
+ for (i = 0; i < NCAPINTS; i++) {
+ c->x86_capability[i] &= ~cpu_caps_cleared[i];
+ c->x86_capability[i] |= cpu_caps_set[i];
+ }
+
#ifdef CONFIG_X86_64
c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
#endif
#endif
init_hypervisor(c);
+
+ /*
+ * Clear/Set all flags overriden by options, need do it
+ * before following smp all cpus cap AND.
+ */
+ for (i = 0; i < NCAPINTS; i++) {
+ c->x86_capability[i] &= ~cpu_caps_cleared[i];
+ c->x86_capability[i] |= cpu_caps_set[i];
+ }
+
/*
* On SMP, boot_cpu_data holds the common feature set between
* all CPUs; so make sure that we indicate which features are
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
- /* Clear all flags overriden by options */
- for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
#ifdef CONFIG_X86_MCE
/* Init Machine Check Exception if available. */
mcheck_init(c);
load_TR_desc();
load_LDT(&init_mm.context);
+ t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+
#ifdef CONFIG_DOUBLEFAULT
/* Set up doublefault TSS pointer in the GDT */
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT));
seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT));
seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR));
-#endif /* CONFIG_X86_LOCAL_APIC */
+ if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
+ unsigned int i, v, maxeilvt;
+
+ v = apic_read(APIC_EFEAT);
+ maxeilvt = (v >> 16) & 0xff;
+ seq_printf(seq, " EFEAT\t\t: %08x\n", v);
+ seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL));
+ for (i = 0; i < maxeilvt; i++) {
+ v = apic_read(APIC_EILVTn(i));
+ seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v);
+ }
+ }
+#endif /* CONFIG_X86_LOCAL_APIC */
seq_printf(seq, "\n MSR\t:\n");
}
If in doubt, say N.
config X86_E_POWERSAVER
- tristate "VIA C7 Enhanced PowerSaver"
+ tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
select CPU_FREQ_TABLE
- depends on X86_32
+ depends on X86_32 && EXPERIMENTAL
help
- This adds the CPUFreq driver for VIA C7 processors.
+ This adds the CPUFreq driver for VIA C7 processors. However, this driver
+ does not have any safeguards to prevent operating the CPU out of spec
+ and is thus considered dangerous. Please use the regular ACPI cpufreq
+ driver, enabled by CONFIG_X86_ACPI_CPUFREQ.
If in doubt, say N.
struct acpi_cpufreq_data {
struct acpi_processor_performance *acpi_data;
struct cpufreq_frequency_table *freq_table;
- unsigned int max_freq;
unsigned int resume;
unsigned int cpu_feature;
};
static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
+struct acpi_msr_data {
+ u64 saved_aperf, saved_mperf;
+};
+
+static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+
DEFINE_TRACE(power_mark);
/* acpi_perf_data is a pointer to percpu data. */
{
struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
- if (cpu->x86_vendor != X86_VENDOR_INTEL ||
- !cpu_has(cpu, X86_FEATURE_EST))
- return 0;
-
- return 1;
+ return cpu_has(cpu, X86_FEATURE_EST);
}
static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
u32 val;
};
-static long do_drv_read(void *_cmd)
+/* Called via smp_call_function_single(), on the target CPU */
+static void do_drv_read(void *_cmd)
{
struct drv_cmd *cmd = _cmd;
u32 h;
default:
break;
}
- return 0;
}
-static long do_drv_write(void *_cmd)
+/* Called via smp_call_function_many(), on the target CPUs */
+static void do_drv_write(void *_cmd)
{
struct drv_cmd *cmd = _cmd;
u32 lo, hi;
default:
break;
}
- return 0;
}
static void drv_read(struct drv_cmd *cmd)
{
cmd->val = 0;
- work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
+ smp_call_function_single(cpumask_any(cmd->mask), do_drv_read, cmd, 1);
}
static void drv_write(struct drv_cmd *cmd)
{
- unsigned int i;
+ int this_cpu;
- for_each_cpu(i, cmd->mask) {
- work_on_cpu(i, do_drv_write, cmd);
- }
+ this_cpu = get_cpu();
+ if (cpumask_test_cpu(this_cpu, cmd->mask))
+ do_drv_write(cmd);
+ smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+ put_cpu();
}
static u32 get_cur_val(const struct cpumask *mask)
return cmd.val;
}
-struct perf_cur {
+struct perf_pair {
union {
struct {
u32 lo;
u32 hi;
} split;
u64 whole;
- } aperf_cur, mperf_cur;
+ } aperf, mperf;
};
-
-static long read_measured_perf_ctrs(void *_cur)
+/* Called via smp_call_function_single(), on the target CPU */
+static void read_measured_perf_ctrs(void *_cur)
{
- struct perf_cur *cur = _cur;
-
- rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi);
- rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi);
-
- wrmsr(MSR_IA32_APERF, 0, 0);
- wrmsr(MSR_IA32_MPERF, 0, 0);
+ struct perf_pair *cur = _cur;
- return 0;
+ rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi);
+ rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi);
}
/*
static unsigned int get_measured_perf(struct cpufreq_policy *policy,
unsigned int cpu)
{
- struct perf_cur cur;
+ struct perf_pair readin, cur;
unsigned int perf_percent;
unsigned int retval;
- if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur))
+ if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
return 0;
+ cur.aperf.whole = readin.aperf.whole -
+ per_cpu(msr_data, cpu).saved_aperf;
+ cur.mperf.whole = readin.mperf.whole -
+ per_cpu(msr_data, cpu).saved_mperf;
+ per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
+ per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
+
#ifdef __i386__
/*
* We dont want to do 64 bit divide with 32 bit kernel
* Get an approximate value. Return failure in case we cannot get
* an approximate value.
*/
- if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) {
+ if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) {
int shift_count;
u32 h;
- h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi);
+ h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi);
shift_count = fls(h);
- cur.aperf_cur.whole >>= shift_count;
- cur.mperf_cur.whole >>= shift_count;
+ cur.aperf.whole >>= shift_count;
+ cur.mperf.whole >>= shift_count;
}
- if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) {
+ if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) {
int shift_count = 7;
- cur.aperf_cur.split.lo >>= shift_count;
- cur.mperf_cur.split.lo >>= shift_count;
+ cur.aperf.split.lo >>= shift_count;
+ cur.mperf.split.lo >>= shift_count;
}
- if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo)
- perf_percent = (cur.aperf_cur.split.lo * 100) /
- cur.mperf_cur.split.lo;
+ if (cur.aperf.split.lo && cur.mperf.split.lo)
+ perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo;
else
perf_percent = 0;
#else
- if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) {
+ if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) {
int shift_count = 7;
- cur.aperf_cur.whole >>= shift_count;
- cur.mperf_cur.whole >>= shift_count;
+ cur.aperf.whole >>= shift_count;
+ cur.mperf.whole >>= shift_count;
}
- if (cur.aperf_cur.whole && cur.mperf_cur.whole)
- perf_percent = (cur.aperf_cur.whole * 100) /
- cur.mperf_cur.whole;
+ if (cur.aperf.whole && cur.mperf.whole)
+ perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole;
else
perf_percent = 0;
#endif
- retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100;
+ retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
return retval;
}
return -ENOMEM;
}
for_each_possible_cpu(i) {
- if (!alloc_cpumask_var_node(
+ if (!zalloc_cpumask_var_node(
&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
GFP_KERNEL, cpu_to_node(i))) {
/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
- static int print_once;
policy->cpuinfo.transition_latency = 20 * 1000;
- if (!print_once) {
- print_once = 1;
- printk(KERN_INFO "Capping off P-state tranision latency"
- " at 20 uS\n");
- }
+ printk_once(KERN_INFO
+ "P-state transition latency capped at 20 uS\n");
}
- data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
for (i = 0; i < perf->state_count; i++) {
if (i > 0 && perf->states[i].core_frequency >=
if (result)
goto err_freqfree;
+ if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+ printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
/* Current speed is unknown and not detectable by IO port */
#include <linux/timex.h>
#include <linux/io.h>
#include <linux/acpi.h>
-#include <linux/kernel.h>
#include <asm/msr.h>
#include <acpi/processor.h>
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
case 0x16: /* Celeron Core */
+ case 0x1C: /* Atom */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
case 0x0D: /* Pentium M (Dothan) */
return 1;
}
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
static void invalidate_entry(unsigned int entry)
{
powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
}
+#endif
static int get_ranges(unsigned char *pst)
{
goto err0;
}
- if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
+ if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
GFP_KERNEL)) {
retval = -ENOMEM;
goto err05;
data->batps);
}
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+ u32 mhz = 0;
+
+ if (boot_cpu_data.x86 == 0x10)
+ mhz = (100 * (fid + 0x10)) >> did;
+ else if (boot_cpu_data.x86 == 0x11)
+ mhz = (100 * (fid + 8)) >> did;
+ else
+ BUG();
+
+ return mhz * 1000;
+}
+
static int fill_powernow_table(struct powernow_k8_data *data,
struct pst_s *pst, u8 maxvid)
{
{
struct cpufreq_frequency_table *powernow_table;
int ret_val = -ENODEV;
- acpi_integer space_id;
+ acpi_integer control, status;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
goto err_out;
}
- space_id = data->acpi_data.control_register.space_id;
- if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
- (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ control = data->acpi_data.control_register.space_id;
+ status = data->acpi_data.status_register.space_id;
+
+ if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
dprintk("Invalid control/status registers (%x - %x)\n",
- data->acpi_data.control_register.space_id,
- space_id);
+ control, status);
goto err_out;
}
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
printk(KERN_ERR PFX
"unable to alloc powernow_k8_data cpumask\n");
ret_val = -ENOMEM;
powernow_table[i].index = index;
- powernow_table[i].frequency =
- data->acpi_data.states[i].core_frequency * 1000;
+ /* Frequency may be rounded for these */
+ if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+ powernow_table[i].frequency =
+ freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+ } else
+ powernow_table[i].frequency =
+ data->acpi_data.states[i].core_frequency * 1000;
}
return 0;
}
return cpufreq_frequency_table_verify(pol, data->powernow_table);
}
+static const char ACPI_PSS_BIOS_BUG_MSG[] =
+ KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+ KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+
/* per CPU init entry point to the driver */
static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
cpumask_t oldmask;
int rc;
- static int print_once;
if (!cpu_online(pol->cpu))
return -ENODEV;
* an UP version, and is deprecated by AMD.
*/
if (num_online_cpus() != 1) {
- /*
- * Replace this one with print_once as soon as such a
- * thing gets introduced
- */
- if (!print_once) {
- WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
- "does not provide ACPI _PSS objects "
- "in a way that Linux understands. "
- "Please report this to the Linux ACPI"
- " maintainers and complain to your "
- "BIOS vendor.\n");
- print_once++;
- }
+ printk_once(ACPI_PSS_BIOS_BUG_MSG);
goto err_out;
}
if (pol->cpu != 0) {
if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL)))
return -ENOMEM;
- if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
+ if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
free_cpumask_var(saved_mask);
return -ENOMEM;
}
}
#endif
-static void __cpuinit srat_detect_node(void)
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
{
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
unsigned node;
int cpu = smp_processor_id();
- int apicid = hard_smp_processor_id();
+ int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
/* Don't do the funky fallback heuristics the AMD version employs
for now. */
}
/* Work around errata */
- srat_detect_node();
+ srat_detect_node(c);
if (cpu_has(c, X86_FEATURE_VMX))
detect_vmx_virtcap(c);
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
*/
-
- mce_log(&m);
- add_taint(TAINT_MACHINE_CHECK);
+ if (!(flags & MCP_DONTLOG)) {
+ mce_log(&m);
+ add_taint(TAINT_MACHINE_CHECK);
+ }
/*
* Clear state for this bank.
*/
static int check_interval = 5 * 60; /* 5 minutes */
-static int next_interval; /* in jiffies */
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
static void mcheck_timer(unsigned long);
static DEFINE_PER_CPU(struct timer_list, mce_timer);
static void mcheck_timer(unsigned long data)
{
struct timer_list *t = &per_cpu(mce_timer, data);
+ int *n;
WARN_ON(smp_processor_id() != data);
* Alert userspace if needed. If we logged an MCE, reduce the
* polling interval, otherwise increase the polling interval.
*/
+ n = &__get_cpu_var(next_interval);
if (mce_notify_user()) {
- next_interval = max(next_interval/2, HZ/100);
+ *n = max(*n/2, HZ/100);
} else {
- next_interval = min(next_interval * 2,
- (int)round_jiffies_relative(check_interval*HZ));
+ *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
}
- t->expires = jiffies + next_interval;
+ t->expires = jiffies + *n;
add_timer(t);
}
* Log the machine checks left over from the previous reset.
*/
bitmap_fill(all_banks, MAX_NR_BANKS);
- machine_check_poll(MCP_UC, &all_banks);
+ machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
set_in_cr4(X86_CR4_MCE);
static void mce_init_timer(void)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
+ int *n = &__get_cpu_var(next_interval);
- /* data race harmless because everyone sets to the same value */
- if (!next_interval)
- next_interval = check_interval * HZ;
- if (!next_interval)
+ *n = check_interval * HZ;
+ if (!*n)
return;
setup_timer(t, mcheck_timer, smp_processor_id());
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies + *n);
add_timer(t);
}
/* Reinit MCEs after user configuration changes */
static void mce_restart(void)
{
- next_interval = check_interval * HZ;
on_each_cpu(mce_cpu_restart, NULL, 1);
}
break;
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies +
+ __get_cpu_var(next_interval));
add_timer_on(t, cpu);
smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
break;
if (!mce_available(&boot_cpu_data))
return -EIO;
- alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
+ zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
err = mce_init_banks();
if (err)
static void cmci_discover(int banks, int boot)
{
unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+ unsigned long flags;
int hdr = 0;
int i;
- spin_lock(&cmci_discover_lock);
+ spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
u64 val;
WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
}
}
- spin_unlock(&cmci_discover_lock);
+ spin_unlock_irqrestore(&cmci_discover_lock, flags);
if (hdr)
printk(KERN_CONT "\n");
}
*/
void cmci_clear(void)
{
+ unsigned long flags;
int i;
int banks;
u64 val;
if (!cmci_supported(&banks))
return;
- spin_lock(&cmci_discover_lock);
+ spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
continue;
wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
__clear_bit(i, __get_cpu_var(mce_banks_owned));
}
- spin_unlock(&cmci_discover_lock);
+ spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
/*
}
printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
mtrr_state.enabled & 2 ? "en" : "dis");
- high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4;
+ if (size_or_mask & 0xffffffffUL)
+ high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
+ else
+ high_width = ffs(size_or_mask>>32) + 32 - 1;
+ high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
for (i = 0; i < num_var_ranges; ++i) {
if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n",
if (c->x86_max_cores * smp_num_siblings > 1) {
seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
seq_printf(m, "siblings\t: %d\n",
- cpumask_weight(cpu_sibling_mask(cpu)));
+ cpumask_weight(cpu_core_mask(cpu)));
seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
seq_printf(m, "apicid\t\t: %d\n", c->apicid);
u64 addr;
u64 start;
- start = startt;
- while (size < sizet && (start + 1))
+ for (start = startt; ; start += size) {
start = find_e820_area_size(start, &size, align);
-
- if (size < sizet)
- return 0;
+ if (!(start + 1))
+ return 0;
+ if (size >= sizet)
+ break;
+ }
#ifdef CONFIG_X86_32
if (start >= MAXMEM)
paranoid_swapgs:
TRACE_IRQS_IRETQ 0
SWAPGS_UNSAFE_STACK
+ RESTORE_ALL 8
+ jmp irq_return
paranoid_restore:
+ TRACE_IRQS_IRETQ 0
RESTORE_ALL 8
jmp irq_return
paranoid_userspace:
#include <linux/init.h>
#include <linux/list.h>
+#include <trace/syscall.h>
+
#include <asm/cacheflush.h>
#include <asm/ftrace.h>
#include <asm/nops.h>
_ASM_EXTABLE(1b, 4b)
_ASM_EXTABLE(2b, 4b)
- : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
ENTRY(initial_code)
.long i386_start_kernel
-.section .text
-/*
- * Real beginning of normal "text" segment
- */
-ENTRY(stext)
-ENTRY(_stext)
-
/*
* BSS section
*/
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
}
static void hpet_restart_counter(void)
{
hpet_stop_counter();
+ hpet_reset_counter();
hpet_start_counter();
}
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
- unsigned long cfg;
+ unsigned long cfg, cmp, now;
uint64_t delta;
switch (mode) {
hpet_stop_counter();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
+ now = hpet_readl(HPET_COUNTER);
+ cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
/* Make sure we use edge triggered interrupts */
cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
+ hpet_writel(cmp, HPET_Tn_CMP(timer));
+ udelay(1);
+ /*
+ * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+ * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+ * bit is automatically cleared after the first write.
+ * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+ * Publication # 24674)
+ */
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
hpet_start_counter();
hpet_print_config();
/*
* Clock source related code
*/
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
hpet_restart_counter();
/* Verify whether hpet counter works */
- t1 = read_hpet();
+ t1 = hpet_readl(HPET_COUNTER);
rdtscll(start);
/*
rdtscll(now);
} while ((now - start) < 200000UL);
- if (t1 == read_hpet()) {
+ if (t1 == hpet_readl(HPET_COUNTER)) {
printk(KERN_WARNING
"HPET counter not counting. HPET disabled\n");
return -ENODEV;
* to just read by itself. So use jiffies to emulate a free
* running counter:
*/
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
{
static int old_count;
static u32 old_jifs;
*/
void ack_bad_irq(unsigned int irq)
{
- printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+ if (printk_ratelimit())
+ pr_err("unexpected IRQ trap at vector %02x\n", irq);
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* Currently unexpected vectors happen only on SMP and APIC.
* We _must_ ack these because every local APIC has only N
* completely.
* But only ack when the APIC is enabled -AK
*/
- if (cpu_has_apic)
- ack_APIC_irq();
-#endif
+ ack_APIC_irq();
}
#define irq_stats(x) (&per_cpu(irq_stat, x))
seq_printf(p, " Spurious interrupts\n");
#endif
if (generic_interrupt_extension) {
- seq_printf(p, "PLT: ");
+ seq_printf(p, "%*s: ", prec, "PLT");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->generic_irqs);
seq_printf(p, " Platform interrupts\n");
sum += irq_stats(cpu)->irq_thermal_count;
# ifdef CONFIG_X86_64
sum += irq_stats(cpu)->irq_threshold_count;
-#endif
+# endif
#endif
return sum;
}
irq = __get_cpu_var(vector_irq)[vector];
if (!handle_irq(irq, regs)) {
-#ifdef CONFIG_X86_64
- if (!disable_apic)
- ack_APIC_irq();
-#endif
+ ack_APIC_irq();
if (printk_ratelimit())
- printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n",
- __func__, smp_processor_id(), vector, irq);
+ pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n",
+ __func__, smp_processor_id(), vector, irq);
}
irq_exit();
--- /dev/null
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/kprobes.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/timer.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/traps.h>
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+
+#ifdef CONFIG_X86_32
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+ outb(0, 0xF0);
+ if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+ return IRQ_NONE;
+ math_error((void __user *)get_irq_regs()->ip);
+ return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+ .handler = math_error_irq,
+ .name = "fpu",
+};
+#endif
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+ [0 ... IRQ0_VECTOR - 1] = -1,
+ [IRQ0_VECTOR] = 0,
+ [IRQ1_VECTOR] = 1,
+ [IRQ2_VECTOR] = 2,
+ [IRQ3_VECTOR] = 3,
+ [IRQ4_VECTOR] = 4,
+ [IRQ5_VECTOR] = 5,
+ [IRQ6_VECTOR] = 6,
+ [IRQ7_VECTOR] = 7,
+ [IRQ8_VECTOR] = 8,
+ [IRQ9_VECTOR] = 9,
+ [IRQ10_VECTOR] = 10,
+ [IRQ11_VECTOR] = 11,
+ [IRQ12_VECTOR] = 12,
+ [IRQ13_VECTOR] = 13,
+ [IRQ14_VECTOR] = 14,
+ [IRQ15_VECTOR] = 15,
+ [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+int vector_used_by_percpu_irq(unsigned int vector)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (per_cpu(vector_irq, cpu)[vector] != -1)
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __init init_ISA_irqs(void)
+{
+ int i;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ init_bsp_APIC();
+#endif
+ init_8259A(0);
+
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ for (i = 0; i < NR_IRQS_LEGACY; i++) {
+ struct irq_desc *desc = irq_to_desc(i);
+
+ desc->status = IRQ_DISABLED;
+ desc->action = NULL;
+ desc->depth = 1;
+
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
+ }
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+static void __init smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPIs for invalidation */
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+ /* IPI for generic function call */
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+ /* IPI for generic single function call */
+ alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+ call_function_single_interrupt);
+
+ /* Low priority IPI to cleanup after moving an irq */
+ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+ set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+#endif
+#endif /* CONFIG_SMP */
+}
+
+static void __init apic_intr_init(void)
+{
+ smp_intr_init();
+
+#ifdef CONFIG_X86_64
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+#endif
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ /* self generated IPI for local APIC timer */
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+ /* generic IPI for platform specific use */
+ alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
+
+ /* IPI vectors for APIC spurious and error interrupts */
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+ /* Performance monitoring interrupts: */
+# ifdef CONFIG_PERF_COUNTERS
+ alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt);
+ alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
+# endif
+
+#endif
+
+#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
+ /* thermal monitor LVT interrupt */
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+#endif
+}
+
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+#ifdef CONFIG_X86_32
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+#endif
+ init_ISA_irqs();
+}
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ /* Execute any quirks before the call gates are initialised: */
+ x86_quirk_pre_intr_init();
+
+ apic_intr_init();
+
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+ /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
+ if (!test_bit(i, used_vectors))
+ set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+ }
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+
+#ifdef CONFIG_X86_32
+ /*
+ * Call quirks after call gates are initialised (usually add in
+ * the architecture specific gates):
+ */
+ x86_quirk_intr_init();
+
+ /*
+ * External FPU? Set up irq13 if so, for
+ * original braindamaged IBM FERR coupling.
+ */
+ if (boot_cpu_data.hard_math && !cpu_has_fpu)
+ setup_irq(FPU_IRQ, &fpu_irq);
+
+ irq_ctx_init(smp_processor_id());
+#endif
+}
+++ /dev/null
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/timer.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/setup.h>
-#include <asm/i8259.h>
-#include <asm/traps.h>
-
-
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
- outb(0, 0xF0);
- if (ignore_fpu_irq || !boot_cpu_data.hard_math)
- return IRQ_NONE;
- math_error((void __user *)get_irq_regs()->ip);
- return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
- .handler = math_error_irq,
- .name = "fpu",
-};
-
-void __init init_ISA_irqs(void)
-{
- int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- init_bsp_APIC();
-#endif
- init_8259A(0);
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- for (i = 0; i < NR_IRQS_LEGACY; i++) {
- struct irq_desc *desc = irq_to_desc(i);
-
- desc->status = IRQ_DISABLED;
- desc->action = NULL;
- desc->depth = 1;
-
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
- .handler = no_action,
- .name = "cascade",
-};
-
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (per_cpu(vector_irq, cpu)[vector] != -1)
- return 1;
- }
-
- return 0;
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- /* Execute any quirks before the call gates are initialised: */
- x86_quirk_pre_intr_init();
-
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
- /* SYSCALL_VECTOR was reserved in trap_init. */
- if (i != SYSCALL_VECTOR)
- set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
- }
-
-
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for single call function */
- alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
- set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* generic IPI for platform specific use */
- alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-#endif
-
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
- /* thermal monitor LVT interrupt */
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-
- /*
- * Call quirks after call gates are initialised (usually add in
- * the architecture specific gates):
- */
- x86_quirk_intr_init();
-
- /*
- * External FPU? Set up irq13 if so, for
- * original braindamaged IBM FERR coupling.
- */
- if (boot_cpu_data.hard_math && !cpu_has_fpu)
- setup_irq(FPU_IRQ, &fpu_irq);
-
- irq_ctx_init(smp_processor_id());
-}
+++ /dev/null
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
- .handler = no_action,
- .name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (per_cpu(vector_irq, cpu)[vector] != -1)
- return 1;
- }
-
- return 0;
-}
-
-static void __init init_ISA_irqs(void)
-{
- int i;
-
- init_bsp_APIC();
- init_8259A(0);
-
- for (i = 0; i < NR_IRQS_LEGACY; i++) {
- struct irq_desc *desc = irq_to_desc(i);
-
- desc->status = IRQ_DISABLED;
- desc->action = NULL;
- desc->depth = 1;
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-static void __init smp_intr_init(void)
-{
-#ifdef CONFIG_SMP
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for generic single function call */
- alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
- set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-}
-
-static void __init apic_intr_init(void)
-{
- smp_intr_init();
-
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
- alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* generic IPI for platform specific use */
- alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-}
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- init_ISA_irqs();
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (vector != IA32_SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
- }
-
- apic_intr_init();
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
gdb_regs[GDB_SS] = __KERNEL_DS;
gdb_regs[GDB_FS] = 0xFFFF;
gdb_regs[GDB_GS] = 0xFFFF;
+ gdb_regs[GDB_SP] = (int)®s->sp;
#else
gdb_regs[GDB_R8] = regs->r8;
gdb_regs[GDB_R9] = regs->r9;
gdb_regs32[GDB_PS] = regs->flags;
gdb_regs32[GDB_CS] = regs->cs;
gdb_regs32[GDB_SS] = regs->ss;
-#endif
gdb_regs[GDB_SP] = regs->sp;
+#endif
}
/**
gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
gdb_regs32[GDB_CS] = __KERNEL_CS;
gdb_regs32[GDB_SS] = __KERNEL_DS;
- gdb_regs[GDB_PC] = p->thread.ip;
+ gdb_regs[GDB_PC] = 0;
gdb_regs[GDB_R8] = 0;
gdb_regs[GDB_R9] = 0;
gdb_regs[GDB_R10] = 0;
return ret;
}
+static cycle_t kvm_clock_get_cycles(struct clocksource *cs)
+{
+ return kvm_clock_read();
+}
+
/*
* If we don't do that, there is the possibility that the guest
* will calibrate under heavy load - thus, getting a lower lpj -
static struct clocksource kvm_clock = {
.name = "kvm-clock",
- .read = kvm_clock_read,
+ .read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
.mult = 1 << KVM_SCALE,
unsigned int preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
save_processor_state();
#endif
image->preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
restore_processor_state();
#endif
int save_ftrace_enabled;
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
save_processor_state();
#endif
image->preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
restore_processor_state();
#endif
EXPORT_SYMBOL_GPL(ucode_cpu_info);
#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-struct update_for_cpu {
- const void __user *buf;
- size_t size;
-};
-
-static long update_for_cpu(void *_ufc)
-{
- struct update_for_cpu *ufc = _ufc;
- int error;
-
- error = microcode_ops->request_microcode_user(smp_processor_id(),
- ufc->buf, ufc->size);
- if (error < 0)
- return error;
- if (!error)
- microcode_ops->apply_microcode(smp_processor_id());
- return error;
-}
-
static int do_microcode_update(const void __user *buf, size_t size)
{
+ cpumask_t old;
int error = 0;
int cpu;
- struct update_for_cpu ufc = { .buf = buf, .size = size };
+
+ old = current->cpus_allowed;
for_each_online_cpu(cpu) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
if (!uci->valid)
continue;
- error = work_on_cpu(cpu, update_for_cpu, &ufc);
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ error = microcode_ops->request_microcode_user(cpu, buf, size);
if (error < 0)
- break;
+ goto out;
+ if (!error)
+ microcode_ops->apply_microcode(cpu);
}
+out:
+ set_cpus_allowed_ptr(current, &old);
return error;
}
return err;
err = microcode_init_cpu(cpu);
- if (err)
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
return err;
}
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/smp.h>
+#include <linux/pci.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
__get_smp_config(0);
}
-static void smp_reserve_bootmem(struct mpf_intel *mpf)
+static void __init smp_reserve_bootmem(struct mpf_intel *mpf)
{
unsigned long size = get_mpc_size(mpf->physptr);
#ifdef CONFIG_X86_32
static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
-static void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
+static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
{
int i;
}
}
#else /* CONFIG_X86_IO_APIC */
-static inline void check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
+static
+inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
#endif /* CONFIG_X86_IO_APIC */
-static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
- int count)
+static int
+check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
- if (!mpc_new_phys) {
- pr_info("No spare slots, try to append...take your risk, "
- "new mpc_length %x\n", count);
- } else {
- if (count <= mpc_new_length)
- pr_info("No spare slots, try to append..., "
- "new mpc_length %x\n", count);
- else {
- pr_err("mpc_new_length %lx is too small\n",
- mpc_new_length);
- return -1;
- }
+ int ret = 0;
+
+ if (!mpc_new_phys || count <= mpc_new_length) {
+ WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
+ return -1;
}
- return 0;
+ return ret;
}
static int __init replace_intsrc_all(struct mpc_table *mpc,
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
- if (!check_slot(mpc_new_phys, mpc_new_length, count))
+ if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
assign_to_mpc_intsrc(&mp_irqs[i], m);
mpc->length = count;
return 0;
}
-static int __initdata enable_update_mptable;
+int enable_update_mptable;
static int __init update_mptable_setup(char *str)
{
enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+ pci_routeirq = 1;
+#endif
return 0;
}
early_param("update_mptable", update_mptable_setup);
static int __init parse_alloc_mptable_opt(char *p)
{
enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+ pci_routeirq = 1;
+#endif
alloc_mptable = 1;
if (!p)
return 0;
.pv_irq_ops = pv_irq_ops,
.pv_apic_ops = pv_apic_ops,
.pv_mmu_ops = pv_mmu_ops,
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
.pv_lock_ops = pv_lock_ops,
+#endif
};
return *((void **)&tmpl + type);
}
return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags);
}
-struct dma_map_ops swiotlb_dma_ops = {
+static struct dma_map_ops swiotlb_dma_ops = {
.mapping_error = swiotlb_dma_mapping_error,
.alloc_coherent = x86_swiotlb_alloc_coherent,
.free_coherent = swiotlb_free_coherent,
#include <linux/audit.h>
#include <linux/seccomp.h>
#include <linux/signal.h>
-#include <linux/ftrace.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
#include <asm/ds.h>
+#include <trace/syscall.h>
+
#include "tls.h"
enum x86_regset {
{
if (hpet_force_user)
old_ich_force_enable_hpet(dev);
- else
- hpet_print_force_info();
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
},
},
+ { /* Handle problems with rebooting on Dell DXP061 */
+ .callback = set_bios_reboot,
+ .ident = "Dell DXP061",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
+ },
+ },
+ { /* Handle problems with rebooting on Sony VGN-Z540N */
+ .callback = set_bios_reboot,
+ .ident = "Sony VGN-Z540N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
+ },
+ },
{ }
};
unsigned long mmu_cr4_features = X86_CR4_PAE;
#endif
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
+/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
+int bootloader_type, bootloader_version;
/*
* Setup options
#endif
saved_video_mode = boot_params.hdr.vid_mode;
bootloader_type = boot_params.hdr.type_of_loader;
+ if ((bootloader_type >> 4) == 0xe) {
+ bootloader_type &= 0xf;
+ bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
+ }
+ bootloader_version = bootloader_type & 0xf;
+ bootloader_version |= boot_params.hdr.ext_loader_ver << 4;
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
#ifdef CONFIG_X86_32
-/**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init x86_quirk_pre_intr_init(void)
-{
- if (x86_quirks->arch_pre_intr_init) {
- if (x86_quirks->arch_pre_intr_init())
- return;
- }
- init_ISA_irqs();
-}
-
/**
* x86_quirk_intr_init - post gate setup interrupt initialisation
*
/*
* If large page isn't supported, there's no benefit in doing
* this. Also, on non-NUMA, embedding is better.
+ *
+ * NOTE: disabled for now.
*/
- if (!cpu_has_pse || !pcpu_need_numa())
+ if (true || !cpu_has_pse || !pcpu_need_numa())
return -EINVAL;
/*
}
struct smp_ops smp_ops = {
- .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
- .smp_prepare_cpus = native_smp_prepare_cpus,
- .smp_cpus_done = native_smp_cpus_done,
+ .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
+ .smp_prepare_cpus = native_smp_prepare_cpus,
+ .smp_cpus_done = native_smp_cpus_done,
- .smp_send_stop = native_smp_send_stop,
- .smp_send_reschedule = native_smp_send_reschedule,
+ .smp_send_stop = native_smp_send_stop,
+ .smp_send_reschedule = native_smp_send_reschedule,
- .cpu_up = native_cpu_up,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
+ .cpu_up = native_cpu_up,
+ .cpu_die = native_cpu_die,
+ .cpu_disable = native_cpu_disable,
+ .play_dead = native_play_dead,
- .send_call_func_ipi = native_send_call_func_ipi,
+ .send_call_func_ipi = native_send_call_func_ipi,
.send_call_func_single_ipi = native_send_call_func_single_ipi,
};
EXPORT_SYMBOL_GPL(smp_ops);
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
*/
-int __devinit
+int __cpuinit
wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
return (send_status | accept_status);
}
-int __devinit
+static int __cpuinit
wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
/* mark "stuck" area as not stuck */
*((volatile unsigned long *)trampoline_base) = 0;
- /*
- * Cleanup possible dangling ends...
- */
- smpboot_restore_warm_reset_vector();
+ if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
+ /*
+ * Cleanup possible dangling ends...
+ */
+ smpboot_restore_warm_reset_vector();
+ }
return boot_error;
}
*/
if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
!cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation."
+ if (!disable_apic) {
+ pr_err("BIOS bug, local APIC #%d not detected!...\n",
+ boot_cpu_physical_apicid);
+ pr_err("... forcing use of dummy APIC emulation."
"(tell your hw vendor)\n");
+ }
smpboot_clear_io_apic();
arch_disable_smp_support();
return -1;
/* position of pnode (which is nasid>>1): */
static int uv_nshift __read_mostly;
+/* base pnode in this partition */
+static int uv_partition_base_pnode __read_mostly;
static unsigned long uv_mmask __read_mostly;
static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
static DEFINE_PER_CPU(struct bau_control, bau_control);
+/*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+ int node, b;
+
+ for_each_online_node(node) {
+ b = uv_node_to_blade_id(node);
+ if (blade == b)
+ return node;
+ }
+ return -1; /* shouldn't happen */
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+ int cpu;
+
+ for_each_present_cpu(cpu)
+ if (blade == uv_cpu_to_blade_id(cpu))
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ return -1;
+}
+
/*
* Free a software acknowledge hardware resource by clearing its Pending
* bit. This will return a reply to the sender.
msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
cpu = uv_blade_processor_id();
msg->number_of_cpus =
- uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+ uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
this_cpu_mask = 1UL << cpu;
if (msp->seen_by.bits & this_cpu_mask)
return;
* Returns @flush_mask if some remote flushing remains to be done. The
* mask will have some bits still set.
*/
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
struct bau_desc *bau_desc,
struct cpumask *flush_mask)
{
int completion_status = 0;
int right_shift;
int tries = 0;
- int blade;
+ int pnode;
int bit;
unsigned long mmr_offset;
unsigned long index;
* use the IPI method of shootdown on them.
*/
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- if (blade == this_blade)
+ pnode = uv_cpu_to_pnode(bit);
+ if (pnode == this_pnode)
continue;
cpumask_clear_cpu(bit, flush_mask);
}
struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask);
int i;
int bit;
- int blade;
+ int pnode;
int uv_cpu;
- int this_blade;
+ int this_pnode;
int locals = 0;
struct bau_desc *bau_desc;
cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
uv_cpu = uv_blade_processor_id();
- this_blade = uv_numa_blade_id();
+ this_pnode = uv_hub_info->pnode;
bau_desc = __get_cpu_var(bau_control).descriptor_base;
bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
i = 0;
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
- if (blade == this_blade) {
+ pnode = uv_cpu_to_pnode(bit);
+ BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+ if (pnode == this_pnode) {
locals++;
continue;
}
- bau_node_set(blade, &bau_desc->distribution);
+ bau_node_set(pnode - uv_partition_base_pnode,
+ &bau_desc->distribution);
i++;
}
if (i == 0) {
bau_desc->payload.address = va;
bau_desc->payload.sending_cpu = cpu;
- return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+ return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
}
/*
set_irq_regs(old_regs);
}
+/*
+ * uv_enable_timeouts
+ *
+ * Each target blade (i.e. blades that have cpu's) needs to have
+ * shootdown message timeouts enabled. The timeout does not cause
+ * an interrupt, but causes an error message to be returned to
+ * the sender.
+ */
static void uv_enable_timeouts(void)
{
- int i;
int blade;
- int last_blade;
+ int nblades;
int pnode;
- int cur_cpu = 0;
- unsigned long apicid;
+ unsigned long mmr_image;
- last_blade = -1;
- for_each_online_node(i) {
- blade = uv_node_to_blade_id(i);
- if (blade == last_blade)
+ nblades = uv_num_possible_blades();
+
+ for (blade = 0; blade < nblades; blade++) {
+ if (!uv_blade_nr_possible_cpus(blade))
continue;
- last_blade = blade;
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+
pnode = uv_blade_to_pnode(blade);
- cur_cpu += uv_blade_nr_possible_cpus(i);
+ mmr_image =
+ uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL);
+ /*
+ * Set the timeout period and then lock it in, in three
+ * steps; captures and locks in the period.
+ *
+ * To program the period, the SOFT_ACK_MODE must be off.
+ */
+ mmr_image &= ~((unsigned long)1 <<
+ UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+ /*
+ * Set the 4-bit period.
+ */
+ mmr_image &= ~((unsigned long)0xf <<
+ UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+ mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD <<
+ UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+ /*
+ * Subsequent reversals of the timebase bit (3) cause an
+ * immediate timeout of one or all INTD resources as
+ * indicated in bits 2:0 (7 causes all of them to timeout).
+ */
+ mmr_image |= ((unsigned long)1 <<
+ UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
}
}
stat->requestee, stat->onetlb, stat->alltlb,
stat->s_retry, stat->d_retry, stat->ptc_i);
seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
- uv_read_global_mmr64(uv_blade_to_pnode
- (uv_cpu_to_blade_id(cpu)),
+ uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
stat->sflush, stat->dflush,
stat->retriesok, stat->nomsg,
* finish the initialization of the per-blade control structures
*/
static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
struct bau_control *bau_tablesp,
struct bau_desc *adp)
{
struct bau_control *bcp;
- int i;
+ int cpu;
- for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
- bcp = (struct bau_control *)&per_cpu(bau_control, i);
+ for_each_present_cpu(cpu) {
+ if (blade != uv_cpu_to_blade_id(cpu))
+ continue;
+ bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
bcp->bau_msg_head = bau_tablesp->va_queue_first;
bcp->va_queue_first = bau_tablesp->va_queue_first;
bcp->va_queue_last = bau_tablesp->va_queue_last;
struct bau_desc *adp;
struct bau_desc *ad2;
- adp = (struct bau_desc *)
- kmalloc_node(16384, GFP_KERNEL, node);
+ adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
BUG_ON(!adp);
- pa = __pa((unsigned long)adp);
+ pa = uv_gpa(adp); /* need the real nasid*/
n = pa >> uv_nshift;
m = pa & uv_mmask;
for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
memset(ad2, 0, sizeof(struct bau_desc));
ad2->header.sw_ack_flag = 1;
- ad2->header.base_dest_nodeid =
- uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+ /*
+ * base_dest_nodeid is the first node in the partition, so
+ * the bit map will indicate partition-relative node numbers.
+ * note that base_dest_nodeid is actually a nasid.
+ */
+ ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
{
struct bau_payload_queue_entry *pqp;
+ unsigned long pa;
+ int pn;
char *cp;
pqp = (struct bau_payload_queue_entry *) kmalloc_node(
cp = (char *)pqp + 31;
pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
bau_tablesp->va_queue_first = pqp;
+ /*
+ * need the pnode of where the memory was really allocated
+ */
+ pa = uv_gpa(pqp);
+ pn = pa >> uv_nshift;
uv_write_global_mmr64(pnode,
UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
- ((unsigned long)pnode <<
- UV_PAYLOADQ_PNODE_SHIFT) |
+ ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
uv_physnodeaddr(pqp));
uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
uv_physnodeaddr(pqp));
/*
* Initialization of each UV blade's structures
*/
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
{
+ int node;
int pnode;
unsigned long pa;
unsigned long apicid;
struct bau_payload_queue_entry *pqp;
struct bau_control *bau_tablesp;
+ node = blade_to_first_node(blade);
bau_tablesp = uv_table_bases_init(blade, node);
pnode = uv_blade_to_pnode(blade);
adp = uv_activation_descriptor_init(node, pnode);
pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
- uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+ uv_table_bases_finish(blade, bau_tablesp, adp);
/*
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+ apicid = blade_to_first_apicid(blade);
pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
if ((pa & 0xff) != UV_BAU_MESSAGE) {
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
static int __init uv_bau_init(void)
{
int blade;
- int node;
int nblades;
- int last_blade;
int cur_cpu;
if (!is_uv_system())
return 0;
for_each_possible_cpu(cur_cpu)
- alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
+ zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
GFP_KERNEL, cpu_to_node(cur_cpu));
uv_bau_retry_limit = 1;
uv_nshift = uv_hub_info->n_val;
uv_mmask = (1UL << uv_hub_info->n_val) - 1;
- nblades = 0;
- last_blade = -1;
- cur_cpu = 0;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- nblades++;
- }
+ nblades = uv_num_possible_blades();
+
uv_bau_table_bases = (struct bau_control **)
kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
BUG_ON(!uv_bau_table_bases);
- last_blade = -1;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- uv_init_blade(blade, node, cur_cpu);
- cur_cpu += uv_blade_nr_possible_cpus(blade);
- }
+ uv_partition_base_pnode = 0x7fffffff;
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade) &&
+ (uv_blade_to_pnode(blade) < uv_partition_base_pnode))
+ uv_partition_base_pnode = uv_blade_to_pnode(blade);
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade))
+ uv_init_blade(blade);
+
alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();
for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
set_bit(i, used_vectors);
-#ifdef CONFIG_X86_64
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
-#else
- set_bit(SYSCALL_VECTOR, used_vectors);
-#endif
+
/*
* Should be a barrier for any external CPU state:
*/
* code, which is necessary to support wrapping clocksources like pm
* timer.
*/
-static cycle_t read_tsc(void)
+static cycle_t read_tsc(struct clocksource *cs)
{
cycle_t ret = (cycle_t)get_cycles();
#include <linux/sysdev.h>
#include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
struct kobject *sgi_uv_kobj;
{
unsigned long ret;
+ if (!is_uv_system())
+ return -ENODEV;
+
if (!sgi_uv_kobj)
sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
if (!sgi_uv_kobj) {
#define RTC_NAME "sgi_rtc"
-static cycle_t uv_read_rtc(void);
+static cycle_t uv_read_rtc(struct clocksource *cs);
static int uv_rtc_next_event(unsigned long, struct clock_event_device *);
static void uv_rtc_timer_setup(enum clock_event_mode,
struct clock_event_device *);
/* Initialize comparator value */
uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
- return (expires < uv_read_rtc() && !uv_intr_pending(pnode));
+ return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
}
/*
spin_lock_irqsave(&head->lock, flags);
- if (head->next_cpu == bcpu && uv_read_rtc() >= *t)
+ if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
rc = 1;
*t = ULLONG_MAX;
/*
* Read the RTC.
*/
-static cycle_t uv_read_rtc(void)
+static cycle_t uv_read_rtc(struct clocksource *cs)
{
return (cycle_t)uv_read_local_mmr(UVH_RTC);
}
{
int ced_cpu = cpumask_first(ced->cpumask);
- return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc());
+ return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL));
}
/*
/** vmi clocksource */
static struct clocksource clocksource_vmi;
-static cycle_t read_real_cycles(void)
+static cycle_t read_real_cycles(struct clocksource *cs)
{
cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
return max(ret, clocksource_vmi.cycle_last);
+/*
+ * ld script for the x86 kernel
+ *
+ * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * Modernisation, unification and other changes and fixes:
+ * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
+ *
+ *
+ * Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
+ */
+
#ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
+#define LOAD_OFFSET __PAGE_OFFSET
#else
-# include "vmlinux_64.lds.S"
+#define LOAD_OFFSET __START_KERNEL_map
#endif
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page_types.h>
+#include <asm/cache.h>
+#include <asm/boot.h>
+
+#undef i386 /* in case the preprocessor is a 32bit one */
+
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#ifdef CONFIG_X86_32
+OUTPUT_ARCH(i386)
+ENTRY(phys_startup_32)
+jiffies = jiffies_64;
+#else
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(phys_startup_64)
+jiffies_64 = jiffies;
+#endif
+
+PHDRS {
+ text PT_LOAD FLAGS(5); /* R_E */
+ data PT_LOAD FLAGS(7); /* RWE */
+#ifdef CONFIG_X86_64
+ user PT_LOAD FLAGS(7); /* RWE */
+ data.init PT_LOAD FLAGS(7); /* RWE */
+#ifdef CONFIG_SMP
+ percpu PT_LOAD FLAGS(7); /* RWE */
+#endif
+ data.init2 PT_LOAD FLAGS(7); /* RWE */
+#endif
+ note PT_NOTE FLAGS(0); /* ___ */
+}
+
+SECTIONS
+{
+#ifdef CONFIG_X86_32
+ . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+ phys_startup_32 = startup_32 - LOAD_OFFSET;
+#else
+ . = __START_KERNEL;
+ phys_startup_64 = startup_64 - LOAD_OFFSET;
+#endif
+
+ /* Text and read-only data */
+
+ /* bootstrapping code */
+ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+ _text = .;
+ *(.text.head)
+ } :text = 0x9090
+
+ /* The rest of the text */
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+#ifdef CONFIG_X86_32
+ /* not really needed, already page aligned */
+ . = ALIGN(PAGE_SIZE);
+ *(.text.page_aligned)
+#endif
+ . = ALIGN(8);
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ /* End of text section */
+ _etext = .;
+ } :text = 0x9090
+
+ NOTES :text :note
+
+ /* Exception table */
+ . = ALIGN(16);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ } :text = 0x9090
+
+ RODATA
+
+ /* Data */
+ . = ALIGN(PAGE_SIZE);
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
+ DATA_DATA
+ CONSTRUCTORS
+
+#ifdef CONFIG_X86_64
+ /* End of data section */
+ _edata = .;
+#endif
+ } :data
+
+#ifdef CONFIG_X86_32
+ /* 32 bit has nosave before _edata */
+ . = ALIGN(PAGE_SIZE);
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ *(.data.page_aligned)
+ *(.data.idt)
+ }
+
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(PAGE_SIZE);
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+#endif
+ .data.cacheline_aligned :
+ AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ *(.data.cacheline_aligned)
+ }
+
+ /* rarely changed data like cpu maps */
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
+#endif
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
+
+#ifdef CONFIG_X86_32
+ /* End of data section */
+ _edata = .;
+#endif
+ }
+
+#ifdef CONFIG_X86_64
+
+#define VSYSCALL_ADDR (-10*1024*1024)
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+
+#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
+
+#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
+
+ . = VSYSCALL_ADDR;
+ .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+ *(.vsyscall_0)
+ } :user
+
+ __vsyscall_0 = VSYSCALL_VIRT_ADDR;
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
+ *(.vsyscall_fn)
+ }
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
+ *(.vsyscall_gtod_data)
+ }
+
+ vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
+ .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) {
+ *(.vsyscall_clock)
+ }
+ vsyscall_clock = VVIRT(.vsyscall_clock);
+
+
+ .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) {
+ *(.vsyscall_1)
+ }
+ .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) {
+ *(.vsyscall_2)
+ }
+
+ .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) {
+ *(.vgetcpu_mode)
+ }
+ vgetcpu_mode = VVIRT(.vgetcpu_mode);
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .jiffies : AT(VLOAD(.jiffies)) {
+ *(.jiffies)
+ }
+ jiffies = VVIRT(.jiffies);
+
+ .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
+ *(.vsyscall_3)
+ }
+
+ . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+
+#undef VSYSCALL_ADDR
+#undef VSYSCALL_PHYS_ADDR
+#undef VSYSCALL_VIRT_ADDR
+#undef VLOAD_OFFSET
+#undef VLOAD
+#undef VVIRT_OFFSET
+#undef VVIRT
+
+#endif /* CONFIG_X86_64 */
+
+ /* init_task */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
+#ifdef CONFIG_X86_64
+ :data.init
+#endif
+
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
+ .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+ __parainstructions = .;
+ *(.parainstructions)
+ __parainstructions_end = .;
+ }
+
+ . = ALIGN(8);
+ .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+
+ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ *(.altinstr_replacement)
+ }
+
+ /*
+ * .exit.text is discard at runtime, not link time, to deal with
+ * references from .altinstructions and .eh_frame
+ */
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ EXIT_TEXT
+ }
+
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+ EXIT_DATA
+ }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
+ /*
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - __data_nosave - should
+ * start another section data.init2. Also, pda should be at the head of
+ * percpu area. Preallocate it and define the percpu offset symbol
+ * so that it can be accessed as a percpu variable.
+ */
+ . = ALIGN(PAGE_SIZE);
+ PERCPU_VADDR(0, :percpu)
+#else
+ PERCPU(PAGE_SIZE)
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+
+ /* freed after init ends here */
+ .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
+ __init_end = .;
+ }
+
+#ifdef CONFIG_X86_64
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ . = ALIGN(PAGE_SIZE);
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ } :data.init2
+ /* use another section data.init2, see PERCPU_VADDR() above */
+#endif
+
+ /* BSS */
+ . = ALIGN(PAGE_SIZE);
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __bss_start = .;
+ *(.bss.page_aligned)
+ *(.bss)
+ . = ALIGN(4);
+ __bss_stop = .;
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+ __brk_base = .;
+ . += 64 * 1024; /* 64k alignment slop space */
+ *(.brk_reservation) /* areas brk users have reserved */
+ __brk_limit = .;
+ }
+
+ .end : AT(ADDR(.end) - LOAD_OFFSET) {
+ _end = .;
+ }
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.eh_frame)
+ *(.discard)
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+}
+
+
+#ifdef CONFIG_X86_32
+ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
+#else
+/*
+ * Per-cpu symbols which need to be offset from __per_cpu_load
+ * for the boot processor.
+ */
+#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+INIT_PER_CPU(gdt_page);
+INIT_PER_CPU(irq_stack_union);
+
+/*
+ * Build-time check on the image size:
+ */
+ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
+
+#ifdef CONFIG_SMP
+ASSERT((per_cpu__irq_stack_union == 0),
+ "irq_stack_union is not at start of per-cpu area");
+#endif
+
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big")
+#endif
+
+++ /dev/null
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- *
- * Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-
-#define LOAD_OFFSET __PAGE_OFFSET
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/page_types.h>
-#include <asm/cache.h>
-#include <asm/boot.h>
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(phys_startup_32)
-jiffies = jiffies_64;
-
-PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
-}
-SECTIONS
-{
- . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
- phys_startup_32 = startup_32 - LOAD_OFFSET;
-
- .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- *(.text.head)
- } :text = 0x9090
-
- /* read-only */
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
- *(.text.page_aligned)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- /* writeable */
- . = ALIGN(PAGE_SIZE);
- .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
- DATA_DATA
- CONSTRUCTORS
- } :data
-
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
- *(.data.idt)
- }
-
- . = ALIGN(32);
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- _edata = .; /* End of data section */
- }
-
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
- }
-
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- }
- /* will be freed after init
- * Following ALIGN() is required to make sure no other data falls on the
- * same page where __smp_alt_end is pointing as that page might be freed
- * after boot. Always make sure that ALIGN() directive is present after
- * the section which contains __smp_alt_end.
- */
- . = ALIGN(PAGE_SIZE);
-
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
- . = ALIGN(4);
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- . = ALIGN(4);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
- PERCPU(PAGE_SIZE)
- . = ALIGN(PAGE_SIZE);
- /* freed after init ends here */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- . = ALIGN(4);
- __bss_stop = .;
- }
-
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
- }
-
- .end : AT(ADDR(.end) - LOAD_OFFSET) {
- _end = . ;
- }
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.discard)
- }
-
- STABS_DEBUG
-
- DWARF_DEBUG
-}
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_KEXEC
-/* Link time checks */
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
-#endif
+++ /dev/null
-/* ld script to make x86-64 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- */
-
-#define LOAD_OFFSET __START_KERNEL_map
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/asm-offsets.h>
-#include <asm/page_types.h>
-
-#undef i386 /* in case the preprocessor is a 32bit one */
-
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
-PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
-#ifdef CONFIG_SMP
- percpu PT_LOAD FLAGS(7); /* RWE */
-#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
-}
-SECTIONS
-{
- . = __START_KERNEL;
- phys_startup_64 = startup_64 - LOAD_OFFSET;
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- /* First the code that has to be first for bootstrapping */
- *(.text.head)
- _stext = .;
- /* Then the rest */
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */
- /* Data */
- .data : AT(ADDR(.data) - LOAD_OFFSET) {
- DATA_DATA
- CONSTRUCTORS
- _edata = .; /* End of data section */
- } :data
-
-
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- *(.data.cacheline_aligned)
- }
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- }
-
-#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
-#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
-
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
-#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
-
- . = VSYSCALL_ADDR;
- .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
- __vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) }
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data))
- { *(.vsyscall_gtod_data) }
- vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
- .vsyscall_clock : AT(VLOAD(.vsyscall_clock))
- { *(.vsyscall_clock) }
- vsyscall_clock = VVIRT(.vsyscall_clock);
-
-
- .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
- { *(.vsyscall_1) }
- .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
- { *(.vsyscall_2) }
-
- .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
- vgetcpu_mode = VVIRT(.vgetcpu_mode);
-
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
- jiffies = VVIRT(.jiffies);
-
- .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
- { *(.vsyscall_3) }
-
- . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
-
-#undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
-#undef VLOAD_OFFSET
-#undef VLOAD
-#undef VVIRT_OFFSET
-#undef VVIRT
-
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- . = ALIGN(THREAD_SIZE); /* init_task */
- *(.data.init_task)
- }:data.init
-
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- *(.data.page_aligned)
- }
-
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- __smp_alt_begin = .;
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- __smp_alt_end = .;
- }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .; /* paired with __init_end */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- __initdata_begin = .;
- INIT_DATA
- __initdata_end = .;
- }
-
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
-
- . = ALIGN(8);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
-
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- . = ALIGN(8);
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
-#ifdef CONFIG_SMP
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
- PERCPU(PAGE_SIZE)
-#endif
-
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- __bss_stop = .;
- }
-
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
- }
-
- _end = . ;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.eh_frame)
- *(.discard)
- }
-
- STABS_DEBUG
-
- DWARF_DEBUG
-}
-
- /*
- * Per-cpu symbols which need to be offset from __per_cpu_load
- * for the boot processor.
- */
-#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
-INIT_PER_CPU(gdt_page);
-INIT_PER_CPU(irq_stack_union);
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
- "irq_stack_union is not at start of per-cpu area");
-#endif
-
-#ifdef CONFIG_KEXEC
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
-#endif
if (!used_math())
return 0;
- clear_used_math(); /* trigger finit */
+
if (task_thread_info(tsk)->status & TS_USEDFPU) {
/*
* Start with clearing the user buffer. This will present a
return -1;
}
+ clear_used_math(); /* trigger finit */
+
if (task_thread_info(tsk)->status & TS_XSAVE) {
struct _fpstate __user *fx = buf;
struct _xstate __user *x = buf;
}
/*
- * for now OS knows only about FP/SSE
+ * Support only the state known to OS.
*/
pcntxt_mask = pcntxt_mask & XCNTXT_MASK;
xsave_init();
pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
sp->gfn = gfn;
sp->role = role;
- sp->global = role.cr4_pge;
+ sp->global = 0;
hlist_add_head(&sp->hash_link, bucket);
if (!direct) {
if (rmap_write_protect(vcpu->kvm, gfn))
static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu)
{
- kvm_x86_ops->tlb_flush(vcpu);
- set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
+ kvm_set_cr3(vcpu, vcpu->arch.cr3);
return 1;
}
iopm_va = page_address(iopm_pages);
memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
- clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */
iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
if (boot_cpu_has(X86_FEATURE_NX))
var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
+ /* AMD's VMCB does not have an explicit unusable field, so emulate it
+ * for cross vendor migration purposes by "not present"
+ */
+ var->unusable = !var->present || (var->type == 0);
+
switch (seg) {
case VCPU_SREG_CS:
/*
var->type |= 0x1;
break;
}
-
- var->unusable = !var->present;
}
static int svm_get_cpl(struct kvm_vcpu *vcpu)
void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
+ unsigned long old_cr4 = vcpu->arch.cr4;
+ unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+
if (cr4 & CR4_RESERVED_BITS) {
printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
kvm_inject_gp(vcpu, 0);
return;
}
- } else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE)
+ } else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
+ && ((cr4 ^ old_cr4) & pdptr_bits)
&& !load_pdptrs(vcpu, vcpu->arch.cr3)) {
printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
kvm_inject_gp(vcpu, 0);
static int is_efer_nx(void)
{
- u64 efer;
+ unsigned long long efer = 0;
- rdmsrl(MSR_EFER, efer);
+ rdmsrl_safe(MSR_EFER, &efer);
return efer & EFER_NX;
}
bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) |
bit(X86_FEATURE_SYSCALL) |
- (bit(X86_FEATURE_NX) && is_efer_nx()) |
+ (is_efer_nx() ? bit(X86_FEATURE_NX) : 0) |
#ifdef CONFIG_X86_64
bit(X86_FEATURE_LM) |
#endif
void kvm_arch_exit(void)
{
+ if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
kvm_x86_ops = NULL;
kvm_mmu_module_exit();
}
void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
{
+ if (vcpu->arch.time_page) {
+ kvm_release_page_dirty(vcpu->arch.time_page);
+ vcpu->arch.time_page = NULL;
+ }
+
kvm_x86_ops->vcpu_free(vcpu);
}
obj-y := i386_head.o boot.o
+CFLAGS_boot.o := $(call cc-option, -fno-stack-protector)
#include <asm/mce.h>
#include <asm/io.h>
#include <asm/i387.h>
+#include <asm/stackprotector.h>
#include <asm/reboot.h> /* for struct machine_ops */
/*G:010 Welcome to the Guest!
* controls the entire thing and the Guest asks it to make changes using the
* LOAD_GDT hypercall.
*
- * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
- * hypercall and use that repeatedly to load a new IDT. I don't think it
- * really matters, but wouldn't it be nice if they were the same? Wouldn't
- * it be even better if you were the one to send the patch to fix it?
+ * This is the exactly like the IDT code.
*/
static void lguest_load_gdt(const struct desc_ptr *desc)
{
- BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES);
- kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES);
+ unsigned int i;
+ struct desc_struct *gdt = (void *)desc->address;
+
+ for (i = 0; i < (desc->size+1)/8; i++)
+ kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
}
/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
const void *desc, int type)
{
native_write_gdt_entry(dt, entrynum, desc, type);
- kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES);
+ /* Tell Host about this new entry. */
+ kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
+ dt[entrynum].a, dt[entrynum].b);
}
/* OK, I lied. There are three "thread local storage" GDT entries which change
void lguest_setup_irq(unsigned int irq)
{
- irq_to_desc_alloc_cpu(irq, 0);
+ irq_to_desc_alloc_node(irq, 0);
set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
handle_level_irq, "level");
}
/* If we can't use the TSC, the kernel falls back to our lower-priority
* "lguest_clock", where we read the time value given to us by the Host. */
-static cycle_t lguest_clock_read(void)
+static cycle_t lguest_clock_read(struct clocksource *cs)
{
unsigned long sec, nsec;
* lguest_init() where the rest of the fairly chaotic boot setup
* occurs. */
+ /* The stack protector is a weird thing where gcc places a canary
+ * value on the stack and then checks it on return. This file is
+ * compiled with -fno-stack-protector it, so we got this far without
+ * problems. The value of the canary is kept at offset 20 from the
+ * %gs register, so we need to set that up before calling C functions
+ * in other files. */
+ setup_stack_canary_segment(0);
+ /* We could just call load_stack_canary_segment(), but we might as
+ * call switch_to_new_gdt() which loads the whole table and sets up
+ * the per-cpu segment descriptor register %fs as well. */
+ switch_to_new_gdt(0);
+
/* As described in head_32.S, we map the first 128M of memory. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
- /* Load the %fs segment register (the per-cpu segment register) with
- * the normal data segment to get through booting. */
- asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
-
/* The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
* it put the answer in lguest_data.reserve_mem */
return 1;
}
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start: starting user address
+ * @nr_pages: number of pages from start to pin
+ * @write: whether pages will be written to
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
int get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages)
{
unsigned long sbase = saddr & PUD_MASK;
unsigned long s_end = sbase + PUD_SIZE;
+ /* Allow segments to share if only one is marked locked */
+ unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+ unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
/*
* match the virtual addresses, permission and the alignment of the
* page table page.
*/
if (pmd_index(addr) != pmd_index(saddr) ||
- vma->vm_flags != svma->vm_flags ||
+ vm_flags != svm_flags ||
sbase < svma->vm_start || svma->vm_end < s_end)
return 0;
#include <asm/page.h>
#include <asm/page_types.h>
#include <asm/sections.h>
+#include <asm/setup.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#endif
#ifdef CONFIG_X86_64
- if (!after_bootmem)
+ if (!after_bootmem && !start) {
+ pud_t *pud;
+ pmd_t *pmd;
+
mmu_cr4_features = read_cr4();
+
+ /*
+ * _brk_end cannot change anymore, but it and _end may be
+ * located on different 2M pages. cleanup_highmap(), however,
+ * can only consider _end when it runs, so destroy any
+ * mappings beyond _brk_end here.
+ */
+ pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+ pmd = pmd_offset(pud, _brk_end - 1);
+ while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+ pmd_clear(pmd);
+ }
#endif
__flush_tlb_all();
return NULL;
area->phys_addr = phys_addr;
vaddr = (unsigned long) area->addr;
- if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+
+ if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
free_memtype(phys_addr, phys_addr + size);
free_vm_area(area);
return NULL;
}
- if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+ if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
free_memtype(phys_addr, phys_addr + size);
- vunmap(area->addr);
+ free_vm_area(area);
return NULL;
}
* - UC_MINUS for non-WB-able memory with no other conflicting mappings
* - Inherit from confliting mappings otherwise
*/
- err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+ err = reserve_memtype(phys_addr, phys_addr + size,
+ _PAGE_CACHE_WB, &flags);
if (err < 0)
return NULL;
}
static void __init __early_set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t flags)
+ phys_addr_t phys, pgprot_t flags)
{
unsigned long addr = __fix_to_virt(idx);
pte_t *pte;
}
static inline void __init early_set_fixmap(enum fixed_addresses idx,
- unsigned long phys, pgprot_t prot)
+ phys_addr_t phys, pgprot_t prot)
{
if (after_paging_init)
__set_fixmap(idx, phys, prot);
late_initcall(check_early_ioremap_leak);
static void __init __iomem *
-__early_ioremap(unsigned long phys_addr, unsigned long size, pgprot_t prot)
+__early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
{
- unsigned long offset, last_addr;
+ unsigned long offset;
+ resource_size_t last_addr;
unsigned int nrpages;
enum fixed_addresses idx0, idx;
int i, slot;
}
if (slot < 0) {
- printk(KERN_INFO "early_iomap(%08lx, %08lx) not found slot\n",
- phys_addr, size);
+ printk(KERN_INFO "early_iomap(%08llx, %08lx) not found slot\n",
+ (u64)phys_addr, size);
WARN_ON(1);
return NULL;
}
if (early_ioremap_debug) {
- printk(KERN_INFO "early_ioremap(%08lx, %08lx) [%d] => ",
- phys_addr, size, slot);
+ printk(KERN_INFO "early_ioremap(%08llx, %08lx) [%d] => ",
+ (u64)phys_addr, size, slot);
dump_stack();
}
}
/* Remap an IO device */
-void __init __iomem *early_ioremap(unsigned long phys_addr, unsigned long size)
+void __init __iomem *
+early_ioremap(resource_size_t phys_addr, unsigned long size)
{
return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO);
}
/* Remap memory */
-void __init __iomem *early_memremap(unsigned long phys_addr, unsigned long size)
+void __init __iomem *
+early_memremap(resource_size_t phys_addr, unsigned long size)
{
return __early_ioremap(phys_addr, size, PAGE_KERNEL);
}
{
struct kmmio_probe *p;
list_for_each_entry_rcu(p, &kmmio_probes, list) {
- if (addr >= p->addr && addr <= (p->addr + p->len))
+ if (addr >= p->addr && addr < (p->addr + p->len))
return p;
}
return NULL;
}
#endif
-static unsigned long calculate_numa_remap_pages(void)
+static __init unsigned long calculate_numa_remap_pages(void)
{
int nid;
unsigned long size, reserve_pages = 0;
const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
int nid;
+ if (!end)
+ return;
+
start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
*/
__flush_tlb_all();
- if (cache && boot_cpu_data.x86_model >= 4)
+ if (cache && boot_cpu_data.x86 >= 4)
wbinvd();
}
int in_flags, struct page **pages)
{
unsigned int i, level;
+ unsigned long do_wbinvd = cache && numpages >= 1024; /* 4M threshold */
BUG_ON(irqs_disabled());
- on_each_cpu(__cpa_flush_range, NULL, 1);
+ on_each_cpu(__cpa_flush_all, (void *) do_wbinvd, 1);
- if (!cache)
+ if (!cache || do_wbinvd)
return;
- /* 4M threshold */
- if (numpages >= 1024) {
- if (boot_cpu_data.x86_model >= 4)
- wbinvd();
- return;
- }
/*
* We only need to flush on one CPU,
* clflush is a MESI-coherent instruction that
int set_memory_uc(unsigned long addr, int numpages)
{
+ int ret;
+
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
- if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
- _PAGE_CACHE_UC_MINUS, NULL))
- return -EINVAL;
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_UC_MINUS, NULL);
+ if (ret)
+ goto out_err;
+
+ ret = _set_memory_uc(addr, numpages);
+ if (ret)
+ goto out_free;
- return _set_memory_uc(addr, numpages);
+ return 0;
+
+out_free:
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+ return ret;
}
EXPORT_SYMBOL(set_memory_uc);
int set_memory_array_uc(unsigned long *addr, int addrinarray)
{
- unsigned long start;
- unsigned long end;
- int i;
+ int i, j;
+ int ret;
+
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
for (i = 0; i < addrinarray; i++) {
- start = __pa(addr[i]);
- for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
- goto out;
+ ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
+ _PAGE_CACHE_UC_MINUS, NULL);
+ if (ret)
+ goto out_free;
}
- return change_page_attr_set(addr, addrinarray,
+ ret = change_page_attr_set(addr, addrinarray,
__pgprot(_PAGE_CACHE_UC_MINUS), 1);
-out:
- for (i = 0; i < addrinarray; i++) {
- unsigned long tmp = __pa(addr[i]);
-
- if (tmp == start)
- break;
- for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- free_memtype(tmp, end);
- }
- return -EINVAL;
+ if (ret)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ for (j = 0; j < i; j++)
+ free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE);
+
+ return ret;
}
EXPORT_SYMBOL(set_memory_array_uc);
int _set_memory_wc(unsigned long addr, int numpages)
{
- return change_page_attr_set(&addr, numpages,
+ int ret;
+ ret = change_page_attr_set(&addr, numpages,
+ __pgprot(_PAGE_CACHE_UC_MINUS), 0);
+
+ if (!ret) {
+ ret = change_page_attr_set(&addr, numpages,
__pgprot(_PAGE_CACHE_WC), 0);
+ }
+ return ret;
}
int set_memory_wc(unsigned long addr, int numpages)
{
+ int ret;
+
if (!pat_enabled)
return set_memory_uc(addr, numpages);
- if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
- _PAGE_CACHE_WC, NULL))
- return -EINVAL;
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_WC, NULL);
+ if (ret)
+ goto out_err;
- return _set_memory_wc(addr, numpages);
+ ret = _set_memory_wc(addr, numpages);
+ if (ret)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+ return ret;
}
EXPORT_SYMBOL(set_memory_wc);
int set_memory_wb(unsigned long addr, int numpages)
{
- free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+ int ret;
+
+ ret = _set_memory_wb(addr, numpages);
+ if (ret)
+ return ret;
- return _set_memory_wb(addr, numpages);
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+ return 0;
}
EXPORT_SYMBOL(set_memory_wb);
int set_memory_array_wb(unsigned long *addr, int addrinarray)
{
int i;
+ int ret;
- for (i = 0; i < addrinarray; i++) {
- unsigned long start = __pa(addr[i]);
- unsigned long end;
-
- for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- free_memtype(start, end);
- }
- return change_page_attr_clear(addr, addrinarray,
+ ret = change_page_attr_clear(addr, addrinarray,
__pgprot(_PAGE_CACHE_MASK), 1);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < addrinarray; i++)
+ free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE);
+
+ return 0;
}
EXPORT_SYMBOL(set_memory_array_wb);
retval = cpa_clear_pages_array(pages, addrinarray,
__pgprot(_PAGE_CACHE_MASK));
+ if (retval)
+ return retval;
for (i = 0; i < addrinarray; i++) {
start = (unsigned long)page_address(pages[i]);
free_memtype(start, end);
}
- return retval;
+ return 0;
}
EXPORT_SYMBOL(set_pages_array_wb);
#ifdef CONFIG_X86_PAT
int __read_mostly pat_enabled = 1;
-void __cpuinit pat_disable(const char *reason)
+static inline void pat_disable(const char *reason)
{
pat_enabled = 0;
printk(KERN_INFO "%s\n", reason);
u8 mtrr_type;
mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == MTRR_TYPE_UNCACHABLE)
- return _PAGE_CACHE_UC;
- if (mtrr_type == MTRR_TYPE_WRCOMB)
- return _PAGE_CACHE_WC;
+ if (mtrr_type != MTRR_TYPE_WRBACK)
+ return _PAGE_CACHE_UC_MINUS;
+
+ return _PAGE_CACHE_WB;
}
return req_type;
return 0;
}
- if (req_type == -1) {
- /*
- * Call mtrr_lookup to get the type hint. This is an
- * optimization for /dev/mem mmap'ers into WB memory (BIOS
- * tools and ACPI tools). Use WB request for WB memory and use
- * UC_MINUS otherwise.
- */
- u8 mtrr_type = mtrr_type_lookup(start, end);
-
- if (mtrr_type == MTRR_TYPE_WRBACK)
- actual_type = _PAGE_CACHE_WB;
- else
- actual_type = _PAGE_CACHE_UC_MINUS;
- } else {
- actual_type = pat_x_mtrr_type(start, end,
- req_type & _PAGE_CACHE_MASK);
- }
+ /*
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
+ */
+ actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK);
if (new_type)
*new_type = actual_type;
int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t *vma_prot)
{
- u64 offset = ((u64) pfn) << PAGE_SHIFT;
- unsigned long flags = -1;
- int retval;
+ unsigned long flags = _PAGE_CACHE_WB;
if (!range_is_allowed(pfn, size))
return 0;
}
#endif
- /*
- * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
- *
- * Without O_SYNC, we want to get
- * - WB for WB-able memory and no other conflicting mappings
- * - UC_MINUS for non-WB-able memory with no other conflicting mappings
- * - Inherit from confliting mappings otherwise
- */
- if (flags != -1) {
- retval = reserve_memtype(offset, offset + size, flags, NULL);
- } else {
- retval = reserve_memtype(offset, offset + size, -1, &flags);
- }
-
- if (retval < 0)
- return 0;
-
- if (((pfn < max_low_pfn_mapped) ||
- (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
- ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
- free_memtype(offset, offset + size);
- printk(KERN_INFO
- "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
- current->comm, current->pid,
- cattr_name(flags),
- offset, (unsigned long long)(offset + size));
- return 0;
- }
-
*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
flags);
return 1;
}
-void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
- unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
- u64 addr = (u64)pfn << PAGE_SHIFT;
- unsigned long flags;
-
- reserve_memtype(addr, addr + size, want_flags, &flags);
- if (flags != want_flags) {
- printk(KERN_INFO
- "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
- current->comm, current->pid,
- cattr_name(want_flags),
- addr, (unsigned long long)(addr + size),
- cattr_name(flags));
- }
-}
-
-void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
- u64 addr = (u64)pfn << PAGE_SHIFT;
-
- free_memtype(addr, addr + size);
-}
-
/*
* Change the memory type for the physial address range in kernel identity
* mapping space if that range is a part of identity map.
{
int is_ram = 0;
int ret;
- unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+ unsigned long flags = want_flags;
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
*
* If the vma has a linear pfn mapping for the entire range, we get the prot
* from pte and reserve the entire vma range with single reserve_pfn_range call.
- * Otherwise, we reserve the entire vma range, my ging through the PTEs page
- * by page to get physical address and protection.
*/
int track_pfn_vma_copy(struct vm_area_struct *vma)
{
- int retval = 0;
- unsigned long i, j;
resource_size_t paddr;
unsigned long prot;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
pgprot_t pgprot;
if (!pat_enabled)
return 0;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/*
* reserve the whole chunk covered by vma. We need the
* starting address and protection from pte.
*/
- if (follow_phys(vma, vma_start, 0, &prot, &paddr)) {
+ if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
WARN_ON_ONCE(1);
return -EINVAL;
}
return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
}
- /* reserve entire vma page by page, using pfn and prot from pte */
- for (i = 0; i < vma_size; i += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
- continue;
-
- pgprot = __pgprot(prot);
- retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
- if (retval)
- goto cleanup_ret;
- }
return 0;
-
-cleanup_ret:
- /* Reserve error: Cleanup partial reservation and return error */
- for (j = 0; j < i; j += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + j, 0, &prot, &paddr))
- continue;
-
- free_pfn_range(paddr, PAGE_SIZE);
- }
-
- return retval;
}
/*
* prot is passed in as a parameter for the new mapping. If the vma has a
* linear pfn mapping for the entire range reserve the entire vma range with
* single reserve_pfn_range call.
- * Otherwise, we look t the pfn and size and reserve only the specified range
- * page by page.
- *
- * Note that this function can be called with caller trying to map only a
- * subrange/page inside the vma.
*/
int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn, unsigned long size)
{
- int retval = 0;
- unsigned long i, j;
- resource_size_t base_paddr;
resource_size_t paddr;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
if (!pat_enabled)
return 0;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/* reserve the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
return reserve_pfn_range(paddr, vma_size, prot, 0);
}
- /* reserve page by page using pfn and size */
- base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
- for (i = 0; i < size; i += PAGE_SIZE) {
- paddr = base_paddr + i;
- retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
- if (retval)
- goto cleanup_ret;
- }
return 0;
-
-cleanup_ret:
- /* Reserve error: Cleanup partial reservation and return error */
- for (j = 0; j < i; j += PAGE_SIZE) {
- paddr = base_paddr + j;
- free_pfn_range(paddr, PAGE_SIZE);
- }
-
- return retval;
}
/*
void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
unsigned long size)
{
- unsigned long i;
resource_size_t paddr;
- unsigned long prot;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
if (!pat_enabled)
return;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/* free the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
free_pfn_range(paddr, vma_size);
return;
}
-
- if (size != 0 && size != vma_size) {
- /* free page by page, using pfn and size */
- paddr = (resource_size_t)pfn << PAGE_SHIFT;
- for (i = 0; i < size; i += PAGE_SIZE) {
- paddr = paddr + i;
- free_pfn_range(paddr, PAGE_SIZE);
- }
- } else {
- /* free entire vma, page by page, using the pfn from pte */
- for (i = 0; i < vma_size; i += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
- continue;
-
- free_pfn_range(paddr, PAGE_SIZE);
- }
- }
}
pgprot_t pgprot_writecombine(pgprot_t prot)
fixmaps_set++;
}
-void native_set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
+void native_set_fixmap(enum fixed_addresses idx, phys_addr_t phys,
+ pgprot_t flags)
{
__native_set_fixmap(idx, pfn_pte(phys >> PAGE_SHIFT, flags));
}
if (num_memory_chunks == 0) {
printk(KERN_WARNING
- "could not finy any ACPI SRAT memory areas.\n");
+ "could not find any ACPI SRAT memory areas.\n");
goto out_fail;
}
static struct acpi_table_slit *acpi_slit;
static nodemask_t nodes_parsed __initdata;
+static nodemask_t cpu_nodes_parsed __initdata;
static struct bootnode nodes[MAX_NUMNODES] __initdata;
static struct bootnode nodes_add[MAX_NUMNODES];
static int found_add_area __initdata;
apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
+ node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, apic_id, node);
else
apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
+ node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, apic_id, node);
{
int i;
node_clear(node, nodes_parsed);
+ node_clear(node, cpu_nodes_parsed);
for (i = 0; i < MAX_LOCAL_APIC; i++) {
if (apicid_to_node[i] == node)
apicid_to_node[i] = NUMA_NO_NODE;
return -1;
}
- node_possible_map = nodes_parsed;
+ /* Account for nodes with cpus and no memory */
+ nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
/* Finally register nodes */
for_each_node_mask(i, node_possible_map)
x86_backtrace(struct pt_regs * const regs, unsigned int depth)
{
struct frame_head *head = (struct frame_head *)frame_pointer(regs);
- unsigned long stack = kernel_trap_sp(regs);
if (!user_mode_vm(regs)) {
+ unsigned long stack = kernel_stack_pointer(regs);
if (depth)
dump_trace(NULL, regs, (unsigned long *)stack, 0,
&backtrace_ops, &depth);
static int pci_root_num;
static struct pci_root_info pci_root_info[PCI_ROOT_NR];
-void set_pci_bus_resources_arch_default(struct pci_bus *b)
+void x86_pci_root_bus_res_quirks(struct pci_bus *b)
{
int i;
int j;
struct pci_root_info *info;
+ /* don't go for it if _CRS is used */
+ if (pci_probe & PCI_USE__CRS)
+ return;
+
/* if only one root bus, don't need to anything */
if (pci_root_num < 2)
return;
* are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
+ /* root bus? */
+ if (!b->parent)
+ x86_pci_root_bus_res_quirks(b);
pci_read_bridge_bases(b);
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
*/
fs_initcall(pcibios_assign_resources);
+void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
+{
+}
+
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
return 0;
}
+ if (io_apic_assign_pci_irqs)
+ return 0;
+
/* Find IRQ routing entry */
if (!pirq_table)
pirq_penalty[dev->irq]++;
}
+ if (io_apic_assign_pci_irqs)
+ return;
+
dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin)
continue;
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Recalculate IRQ numbers if we use the I/O APIC.
- */
- if (io_apic_assign_pci_irqs) {
- int irq;
-
- /*
- * interrupt pins are numbered starting from 1
- */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
- /*
- * Busses behind bridges are typically not listed in the
- * MP-table. In this case we have to look up the IRQ
- * based on the parent bus, parent slot, and pin number.
- * The SMP code detects such bridged busses itself so we
- * should get into this branch reliably.
- */
- if (irq < 0 && dev->bus->parent) {
- /* go back to the bridge */
- struct pci_dev *bridge = dev->bus->self;
- int bus;
-
- pin = pci_swizzle_interrupt_pin(dev, pin);
- bus = bridge->bus->number;
- irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
- if (irq >= 0)
- dev_warn(&dev->dev,
- "using bridge %s INT %c to "
- "get IRQ %d\n",
- pci_name(bridge),
- 'A' + pin - 1, irq);
- }
- if (irq >= 0) {
- dev_info(&dev->dev,
- "PCI->APIC IRQ transform: INT %c "
- "-> IRQ %d\n",
- 'A' + pin - 1, irq);
- dev->irq = irq;
- }
- }
-#endif
/*
* Still no IRQ? Try to lookup one...
*/
pcibios_enable_irq = pirq_enable_irq;
pcibios_fixup_irqs();
+
+ if (io_apic_assign_pci_irqs && pci_routeirq) {
+ struct pci_dev *dev = NULL;
+ /*
+ * PCI IRQ routing is set up by pci_enable_device(), but we
+ * also do it here in case there are still broken drivers that
+ * don't use pci_enable_device().
+ */
+ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ for_each_pci_dev(dev)
+ pirq_enable_irq(dev);
+ }
+
return 0;
}
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+ if (pin && !pcibios_lookup_irq(dev, 1)) {
char *msg = "";
+ if (!io_apic_assign_pci_irqs && dev->irq)
+ return 0;
+
if (io_apic_assign_pci_irqs) {
+#ifdef CONFIG_X86_IO_APIC
+ struct pci_dev *temp_dev;
int irq;
+ struct io_apic_irq_attr irq_attr;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1, &irq_attr);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1, &irq_attr);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
}
dev = temp_dev;
if (irq >= 0) {
+ io_apic_set_pci_routing(&dev->dev, irq,
+ &irq_attr);
+ dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
- dev->irq = irq;
return 0;
} else
msg = "; probably buggy MP table";
+#endif
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
struct resource mcfg_res;
mcfg_res.start = start;
- mcfg_res.end = end;
+ mcfg_res.end = end - 1;
mcfg_res.flags = 0;
acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
u64 old_size = size;
int valid = 0;
- while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+ while (!is_reserved(addr, addr + size, E820_RESERVED)) {
size >>= 1;
if (size < (16UL<<20))
break;
{
long ret;
if (likely(gtod->sysctl_enabled && gtod->clock.vread)) {
- BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
- offsetof(struct timespec, tv_nsec) ||
- sizeof(*tv) != sizeof(struct timespec));
- do_realtime((struct timespec *)tv);
- tv->tv_usec /= 1000;
+ if (likely(tv != NULL)) {
+ BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
+ offsetof(struct timespec, tv_nsec) ||
+ sizeof(*tv) != sizeof(struct timespec));
+ do_realtime((struct timespec *)tv);
+ tv->tv_usec /= 1000;
+ }
if (unlikely(tz != NULL)) {
/* Avoid memcpy. Some old compilers fail to inline it */
tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
-obj-$(CONFIG_SMP) += smp.o spinlock.o
-obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
\ No newline at end of file
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
#include <asm/xen/hypervisor.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
+#include <asm/proto.h>
#include <asm/msr-index.h>
#include <asm/setup.h>
#include <asm/desc.h>
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
+static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
+
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskecx = ~0;
unsigned maskedx = ~0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1)
- maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */
- (1 << X86_FEATURE_ACPI) | /* disable ACPI */
- (1 << X86_FEATURE_MCE) | /* disable MCE */
- (1 << X86_FEATURE_MCA) | /* disable MCA */
- (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+ if (*ax == 1) {
+ maskecx = cpuid_leaf1_ecx_mask;
+ maskedx = cpuid_leaf1_edx_mask;
+ }
asm(XEN_EMULATE_PREFIX "cpuid"
: "=a" (*ax),
"=c" (*cx),
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+
+ *cx &= maskecx;
*dx &= maskedx;
}
+static __init void xen_init_cpuid_mask(void)
+{
+ unsigned int ax, bx, cx, dx;
+
+ cpuid_leaf1_edx_mask =
+ ~((1 << X86_FEATURE_MCE) | /* disable MCE */
+ (1 << X86_FEATURE_MCA) | /* disable MCA */
+ (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+
+ if (!xen_initial_domain())
+ cpuid_leaf1_edx_mask &=
+ ~((1 << X86_FEATURE_APIC) | /* disable local APIC */
+ (1 << X86_FEATURE_ACPI)); /* disable ACPI */
+
+ ax = 1;
+ xen_cpuid(&ax, &bx, &cx, &dx);
+
+ /* cpuid claims we support xsave; try enabling it to see what happens */
+ if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
+ unsigned long cr4;
+
+ set_in_cr4(X86_CR4_OSXSAVE);
+
+ cr4 = read_cr4();
+
+ if ((cr4 & X86_CR4_OSXSAVE) == 0)
+ cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
+
+ clear_in_cr4(X86_CR4_OSXSAVE);
+ }
+}
+
static void xen_set_debugreg(int reg, unsigned long val)
{
HYPERVISOR_set_debugreg(reg, val);
static void xen_load_gdt(const struct desc_ptr *dtr)
{
- unsigned long *frames;
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ unsigned long frames[pages];
int f;
- struct multicall_space mcs;
/* A GDT can be up to 64k in size, which corresponds to 8192
8-byte entries, or 16 4k pages.. */
BUG_ON(size > 65536);
BUG_ON(va & ~PAGE_MASK);
- mcs = xen_mc_entry(sizeof(*frames) * pages);
- frames = mcs.args;
-
for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
- frames[f] = arbitrary_virt_to_mfn((void *)va);
+ int level;
+ pte_t *ptep = lookup_address(va, &level);
+ unsigned long pfn, mfn;
+ void *virt;
+
+ BUG_ON(ptep == NULL);
+
+ pfn = pte_pfn(*ptep);
+ mfn = pfn_to_mfn(pfn);
+ virt = __va(PFN_PHYS(pfn));
+
+ frames[f] = mfn;
make_lowmem_page_readonly((void *)va);
- make_lowmem_page_readonly(mfn_to_virt(frames[f]));
+ make_lowmem_page_readonly(virt);
}
- MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
-
- xen_mc_issue(PARAVIRT_LAZY_CPU);
+ if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+ BUG();
}
static void load_TLS_descriptor(struct thread_struct *t,
static int cvt_gate_to_trap(int vector, const gate_desc *val,
struct trap_info *info)
{
- if (val->type != 0xf && val->type != 0xe)
+ if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
return 0;
info->vector = vector;
info->cs = gate_segment(*val);
info->flags = val->dpl;
/* interrupt gates clear IF */
- if (val->type == 0xe)
- info->flags |= 4;
+ if (val->type == GATE_INTERRUPT)
+ info->flags |= 1 << 2;
return 1;
}
.emergency_restart = xen_emergency_restart,
};
-
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
xen_init_irq_ops();
+ xen_init_cpuid_mask();
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
+#endif
+
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
#include <linux/highmem.h>
#include <linux/debugfs.h>
#include <linux/bug.h>
+#include <linux/module.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
}
/* Build the parallel p2m_top_mfn structures */
-void xen_setup_mfn_list_list(void)
+static void __init xen_build_mfn_list_list(void)
{
unsigned pfn, idx;
unsigned topidx = idx * P2M_ENTRIES_PER_PAGE;
p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]);
}
+}
+void xen_setup_mfn_list_list(void)
+{
BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
p2m_top[topidx] = &mfn_list[pfn];
}
+
+ xen_build_mfn_list_list();
}
unsigned long get_phys_to_machine(unsigned long pfn)
}
EXPORT_SYMBOL_GPL(get_phys_to_machine);
-static void alloc_p2m(unsigned long **pp, unsigned long *mfnp)
+/* install a new p2m_top page */
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p)
{
- unsigned long *p;
+ unsigned topidx = p2m_top_index(pfn);
+ unsigned long **pfnp, *mfnp;
unsigned i;
- p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
- BUG_ON(p == NULL);
+ pfnp = &p2m_top[topidx];
+ mfnp = &p2m_top_mfn[topidx];
for (i = 0; i < P2M_ENTRIES_PER_PAGE; i++)
p[i] = INVALID_P2M_ENTRY;
- if (cmpxchg(pp, p2m_missing, p) != p2m_missing)
- free_page((unsigned long)p);
- else
+ if (cmpxchg(pfnp, p2m_missing, p) == p2m_missing) {
*mfnp = virt_to_mfn(p);
+ return true;
+ }
+
+ return false;
}
-void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+static void alloc_p2m(unsigned long pfn)
{
- unsigned topidx, idx;
+ unsigned long *p;
- if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
- BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
- return;
- }
+ p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
+ BUG_ON(p == NULL);
+
+ if (!install_p2mtop_page(pfn, p))
+ free_page((unsigned long)p);
+}
+
+/* Try to install p2m mapping; fail if intermediate bits missing */
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ unsigned topidx, idx;
if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
BUG_ON(mfn != INVALID_P2M_ENTRY);
- return;
+ return true;
}
topidx = p2m_top_index(pfn);
if (p2m_top[topidx] == p2m_missing) {
- /* no need to allocate a page to store an invalid entry */
if (mfn == INVALID_P2M_ENTRY)
- return;
- alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]);
+ return true;
+ return false;
}
idx = p2m_index(pfn);
p2m_top[topidx][idx] = mfn;
+
+ return true;
+}
+
+void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
+ BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+ return;
+ }
+
+ if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
+ alloc_p2m(pfn);
+
+ if (!__set_phys_to_machine(pfn, mfn))
+ BUG();
+ }
}
unsigned long arbitrary_virt_to_mfn(void *vaddr)
return 0;
}
-void __init xen_mark_init_mm_pinned(void)
+static void __init xen_mark_init_mm_pinned(void)
{
xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
}
} *args;
struct multicall_space mcs;
- BUG_ON(cpumask_empty(cpus));
- BUG_ON(!mm);
+ if (cpumask_empty(cpus))
+ return; /* nothing to do */
mcs = xen_mc_entry(sizeof(*args));
args = mcs.args;
}
#endif
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+ struct mmuext_op op;
+ op.cmd = cmd;
+ op.arg1.mfn = pfn_to_mfn(pfn);
+ if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+ BUG();
+}
+
/* Early in boot, while setting up the initial pagetable, assume
everything is pinned. */
static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
{
+#ifdef CONFIG_FLATMEM
+ BUG_ON(mem_map); /* should only be used early */
+#endif
+ make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+ pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+}
+
+/* Used for pmd and pud */
+static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+{
#ifdef CONFIG_FLATMEM
BUG_ON(mem_map); /* should only be used early */
#endif
/* Early release_pte assumes that all pts are pinned, since there's
only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
+static __init void xen_release_pte_init(unsigned long pfn)
{
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+static __init void xen_release_pmd_init(unsigned long pfn)
{
- struct mmuext_op op;
- op.cmd = cmd;
- op.arg1.mfn = pfn_to_mfn(pfn);
- if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
- BUG();
+ make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
/* This needs to make sure the new pte page is pinned iff its being
pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+ reserve_early(__pa(xen_start_info->pt_base),
+ __pa(xen_start_info->pt_base +
+ xen_start_info->nr_pt_frames * PAGE_SIZE),
+ "XEN PAGETABLES");
+
return swapper_pg_dir;
}
#endif /* CONFIG_X86_64 */
-static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
+static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot)
{
pte_t pte;
#ifdef CONFIG_X86_LOCAL_APIC
case FIX_APIC_BASE: /* maps dummy local APIC */
#endif
+ case FIX_TEXT_POKE0:
+ case FIX_TEXT_POKE1:
+ /* All local page mappings */
pte = pfn_pte(phys, prot);
break;
xen_mark_init_mm_pinned();
}
-
const struct pv_mmu_ops xen_mmu_ops __initdata = {
.pagetable_setup_start = xen_pagetable_setup_start,
.pagetable_setup_done = xen_pagetable_setup_done,
.alloc_pte = xen_alloc_pte_init,
.release_pte = xen_release_pte_init,
- .alloc_pmd = xen_alloc_pte_init,
+ .alloc_pmd = xen_alloc_pmd_init,
.alloc_pmd_clone = paravirt_nop,
- .release_pmd = xen_release_pte_init,
+ .release_pmd = xen_release_pmd_init,
#ifdef CONFIG_HIGHPTE
.kmap_atomic_pte = xen_kmap_atomic_pte,
.make_pud = PV_CALLEE_SAVE(xen_make_pud),
.set_pgd = xen_set_pgd_hyper,
- .alloc_pud = xen_alloc_pte_init,
- .release_pud = xen_release_pte_init,
+ .alloc_pud = xen_alloc_pmd_init,
+ .release_pud = xen_release_pmd_init,
#endif /* PAGETABLE_LEVELS == 4 */
.activate_mm = xen_activate_mm,
};
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p);
+
void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
BUG_ON(rc);
while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
barrier();
}
/* Make sure other vcpus get a chance to run if they need to. */
for_each_cpu(cpu, mask) {
if (xen_vcpu_stolen(cpu)) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
break;
}
}
return ret;
}
+static cycle_t xen_clocksource_get_cycles(struct clocksource *cs)
+{
+ return xen_clocksource_read();
+}
+
static void xen_read_wallclock(struct timespec *ts)
{
struct shared_info *s = HYPERVISOR_shared_info;
static struct clocksource xen_clocksource __read_mostly = {
.name = "xen",
.rating = 400,
- .read = xen_clocksource_read,
+ .read = xen_clocksource_get_cycles,
.mask = ~0,
.mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
.shift = XEN_SHIFT,
bool xen_vcpu_stolen(int vcpu);
-void xen_mark_init_mm_pinned(void);
-
void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
-void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
-void xen_uninit_lock_cpu(int cpu);
-
extern cpumask_var_t xen_cpu_initialized_map;
#else
static inline void xen_smp_init(void) {}
#endif
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+#else
+static inline void xen_init_spinlocks(void)
+{
+}
+static inline void xen_init_lock_cpu(int cpu)
+{
+}
+static inline void xen_uninit_lock_cpu(int cpu)
+{
+}
+#endif
/* Declare an asm function, along with symbols needed to make it
inlineable */
bool "s6000 - Stretch software configurable processor"
select VARIANT_IRQ_SWITCH
select ARCH_REQUIRE_GPIOLIB
+ select XTENSA_CALIBRATE_CCOUNT
endchoice
config XTENSA_UNALIGNED_USER
source "drivers/pci/Kconfig"
+endmenu
+
menu "Platform options"
choice
config XTENSA_PLATFORM_XT2000
bool "XT2000"
- select XTENSA_CALIBRATE_CCOUNT
- select PCI
help
XT2000 is the name of Tensilica's feature-rich emulation platform.
This hardware is capable of running a full Linux distribution.
source "mm/Kconfig"
-endmenu
-
config HOTPLUG
bool "Support for hot-pluggable devices"
help
CONFIG_PREEMPT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_XTENSA_ISS_NETWORK is not set
# CONFIG_XTENSA_PLATFORM_ISS is not set
# CONFIG_XTENSA_PLATFORM_XT2000 is not set
CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_XTENSA_CPU_CLOCK=300
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
are modified, we must also specify them as outputs, or gcc
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
- : "1" (iph), "2" (ihl));
+ : "1" (iph), "2" (ihl)
+ : "memory");
return csum_fold(sum);
}
"1:\t"
: "=r" (sum), "=&r" (__dummy)
: "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+ "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+ : "memory");
return csum_fold(sum);
}
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
extern unsigned long ccount_per_jiffy;
-extern unsigned long ccount_nsec;
+extern unsigned long nsec_per_ccount;
#define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT ccount_nsec
+#define NSEC_PER_CCOUNT nsec_per_ccount
#else
#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
extra-y := head.o vmlinux.lds
-
obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \
pci-dma.o init_task.o io.o
-## windowspill.o
-
obj-$(CONFIG_KGDB) += xtensa-stub.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to *(xxx.literal xxx.text) for the following text sections:
+# .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \
+ -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS $@
+ cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+ $(call if_changed_dep,_cpp_lds_S)
#include <asm/page.h>
#include <asm/cacheasm.h>
+#include <linux/init.h>
#include <linux/linkage.h>
/*
* instruction.
*/
- .section .head.text, "ax"
+ __HEAD
.globl _start
_start: _j 2f
.align 4
regs->syscall);
}
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+ unsigned long *sp;
+
+ if (!task || task == current)
+ __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+ else
+ sp = (unsigned long *)task->thread.sp;
+
+ return sp;
+}
+
void show_trace(struct task_struct *task, unsigned long *sp)
{
unsigned long a0, a1, pc;
if (sp)
a1 = (unsigned long)sp;
else
- a1 = task->thread.sp;
+ a1 = (unsigned long)stack_pointer(task);
sp_start = a1 & ~(THREAD_SIZE-1);
sp_end = sp_start + THREAD_SIZE;
unsigned long *stack;
if (!sp)
- sp = (unsigned long *)task->thread.sp;
+ sp = stack_pointer(task);
stack = sp;
printk("\nStack: ");
.text :
{
- /* The .head.text section must be the first section! */
- *(.head.text)
- *(.literal .text)
+ /* The HEAD_TEXT section must be the first section! */
+ HEAD_TEXT
+ TEXT_TEXT
VMLINUX_SYMBOL(__sched_text_start) = .;
*(.sched.literal .sched.text)
VMLINUX_SYMBOL(__sched_text_end) = .;
__init_begin = .;
.init.text : {
_sinittext = .;
- *(.init.literal) *(.cpuinit.literal)
- *(.devinit.literal) *(.meminit.literal)
INIT_TEXT
_einittext = .;
}
#include <asm/bootparam.h>
#include <variant/hardware.h>
+#include <variant/gpio.h>
+
#include <platform/gpio.h>
void platform_halt(void)
void __init platform_init(bp_tag_t *first)
{
+ s6_gpio_init();
gpio_request(GPIO_LED1_NGREEN, "led1_green");
gpio_request(GPIO_LED1_RED, "led1_red");
gpio_direction_output(GPIO_LED1_NGREEN, 1);
# s6000 Makefile
obj-y += irq.o gpio.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT) += delay.o
--- /dev/null
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+ u32 uninitialized_var(a);
+ u32 uninitialized_var(u);
+ u32 b;
+ u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+ int i = LOOPS+1;
+ do {
+ u32 t = u;
+ asm volatile(
+ "1: l32i %0, %2, 0 ;"
+ " beq %0, %1, 1b ;"
+ : "=&a"(u) : "a"(t), "a"(tstamp));
+ b = xtensa_get_ccount();
+ if (i == LOOPS)
+ a = b;
+ } while (--i >= 0);
+ b -= a;
+ nsec_per_ccount = (LOOPS * 10000) / b;
+ ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
.exported = 0, /* no exporting to userspace */
};
-static int gpio_init(void)
+int s6_gpio_init(void)
{
return gpiochip_add(&gpiochip);
}
-device_initcall(gpio_init);
--- /dev/null
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(void);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
#include <linux/rbtree.h>
#include <linux/interrupt.h>
-#define REQ_SYNC 1
-#define REQ_ASYNC 0
-
/*
* See Documentation/block/as-iosched.txt
*/
struct list_head fifo_list[2];
struct request *next_rq[2]; /* next in sort order */
- sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */
+ sector_t last_sector[2]; /* last SYNC & ASYNC sectors */
unsigned long exit_prob; /* probability a task will exit while
being waited on */
unsigned long last_check_fifo[2];
int changed_batch; /* 1: waiting for old batch to end */
int new_batch; /* 1: waiting on first read complete */
- int batch_data_dir; /* current batch REQ_SYNC / REQ_ASYNC */
+ int batch_data_dir; /* current batch SYNC / ASYNC */
int write_batch_count; /* max # of reqs in a write batch */
int current_write_count; /* how many requests left this batch */
int write_batch_idled; /* has the write batch gone idle? */
if (aic == NULL)
return;
- if (data_dir == REQ_SYNC) {
+ if (data_dir == BLK_RW_SYNC) {
unsigned long in_flight = atomic_read(&aic->nr_queued)
+ atomic_read(&aic->nr_dispatched);
spin_lock(&aic->lock);
*/
static void update_write_batch(struct as_data *ad)
{
- unsigned long batch = ad->batch_expire[REQ_ASYNC];
+ unsigned long batch = ad->batch_expire[BLK_RW_ASYNC];
long write_time;
write_time = (jiffies - ad->current_batch_expires) + batch;
kblockd_schedule_work(q, &ad->antic_work);
ad->changed_batch = 0;
- if (ad->batch_data_dir == REQ_SYNC)
+ if (ad->batch_data_dir == BLK_RW_SYNC)
ad->new_batch = 1;
}
WARN_ON(ad->nr_dispatched == 0);
if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) {
update_write_batch(ad);
ad->current_batch_expires = jiffies +
- ad->batch_expire[REQ_SYNC];
+ ad->batch_expire[BLK_RW_SYNC];
ad->new_batch = 0;
}
if (ad->changed_batch || ad->new_batch)
return 0;
- if (ad->batch_data_dir == REQ_SYNC)
+ if (ad->batch_data_dir == BLK_RW_SYNC)
/* TODO! add a check so a complete fifo gets written? */
return time_after(jiffies, ad->current_batch_expires);
*/
ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
- if (data_dir == REQ_SYNC) {
+ if (data_dir == BLK_RW_SYNC) {
struct io_context *ioc = RQ_IOC(rq);
/* In case we have to anticipate after this */
copy_io_context(&ad->io_context, &ioc);
static int as_dispatch_request(struct request_queue *q, int force)
{
struct as_data *ad = q->elevator->elevator_data;
- const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
- const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+ const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]);
+ const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]);
struct request *rq;
if (unlikely(force)) {
/*
* Forced dispatch, accounting is useless. Reset
* accounting states and dump fifo_lists. Note that
- * batch_data_dir is reset to REQ_SYNC to avoid
+ * batch_data_dir is reset to BLK_RW_SYNC to avoid
* screwing write batch accounting as write batch
* accounting occurs on W->R transition.
*/
int dispatched = 0;
- ad->batch_data_dir = REQ_SYNC;
+ ad->batch_data_dir = BLK_RW_SYNC;
ad->changed_batch = 0;
ad->new_batch = 0;
- while (ad->next_rq[REQ_SYNC]) {
- as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]);
+ while (ad->next_rq[BLK_RW_SYNC]) {
+ as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]);
dispatched++;
}
- ad->last_check_fifo[REQ_SYNC] = jiffies;
+ ad->last_check_fifo[BLK_RW_SYNC] = jiffies;
- while (ad->next_rq[REQ_ASYNC]) {
- as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]);
+ while (ad->next_rq[BLK_RW_ASYNC]) {
+ as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]);
dispatched++;
}
- ad->last_check_fifo[REQ_ASYNC] = jiffies;
+ ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
return dispatched;
}
/* Signal that the write batch was uncontended, so we can't time it */
- if (ad->batch_data_dir == REQ_ASYNC && !reads) {
+ if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) {
if (ad->current_write_count == 0 || !writes)
ad->write_batch_idled = 1;
}
*/
rq = ad->next_rq[ad->batch_data_dir];
- if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) {
- if (as_fifo_expired(ad, REQ_SYNC))
+ if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) {
+ if (as_fifo_expired(ad, BLK_RW_SYNC))
goto fifo_expired;
if (as_can_anticipate(ad, rq)) {
/* we have a "next request" */
if (reads && !writes)
ad->current_batch_expires =
- jiffies + ad->batch_expire[REQ_SYNC];
+ jiffies + ad->batch_expire[BLK_RW_SYNC];
goto dispatch_request;
}
}
*/
if (reads) {
- BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC]));
+ BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC]));
- if (writes && ad->batch_data_dir == REQ_SYNC)
+ if (writes && ad->batch_data_dir == BLK_RW_SYNC)
/*
* Last batch was a read, switch to writes
*/
goto dispatch_writes;
- if (ad->batch_data_dir == REQ_ASYNC) {
+ if (ad->batch_data_dir == BLK_RW_ASYNC) {
WARN_ON(ad->new_batch);
ad->changed_batch = 1;
}
- ad->batch_data_dir = REQ_SYNC;
- rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next);
+ ad->batch_data_dir = BLK_RW_SYNC;
+ rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next);
ad->last_check_fifo[ad->batch_data_dir] = jiffies;
goto dispatch_request;
}
if (writes) {
dispatch_writes:
- BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC]));
+ BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC]));
- if (ad->batch_data_dir == REQ_SYNC) {
+ if (ad->batch_data_dir == BLK_RW_SYNC) {
ad->changed_batch = 1;
/*
*/
ad->new_batch = 0;
}
- ad->batch_data_dir = REQ_ASYNC;
+ ad->batch_data_dir = BLK_RW_ASYNC;
ad->current_write_count = ad->write_batch_count;
ad->write_batch_idled = 0;
- rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next);
- ad->last_check_fifo[REQ_ASYNC] = jiffies;
+ rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next);
+ ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
goto dispatch_request;
}
if (ad->nr_dispatched)
return 0;
- if (ad->batch_data_dir == REQ_ASYNC)
+ if (ad->batch_data_dir == BLK_RW_ASYNC)
ad->current_batch_expires = jiffies +
- ad->batch_expire[REQ_ASYNC];
+ ad->batch_expire[BLK_RW_ASYNC];
else
ad->new_batch = 1;
{
struct as_data *ad = q->elevator->elevator_data;
- return list_empty(&ad->fifo_list[REQ_ASYNC])
- && list_empty(&ad->fifo_list[REQ_SYNC]);
+ return list_empty(&ad->fifo_list[BLK_RW_ASYNC])
+ && list_empty(&ad->fifo_list[BLK_RW_SYNC]);
}
static int
del_timer_sync(&ad->antic_timer);
cancel_work_sync(&ad->antic_work);
- BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC]));
- BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC]));
+ BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC]));
+ BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC]));
put_io_context(ad->io_context);
kfree(ad);
init_timer(&ad->antic_timer);
INIT_WORK(&ad->antic_work, as_work_handler);
- INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]);
- INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
- ad->sort_list[REQ_SYNC] = RB_ROOT;
- ad->sort_list[REQ_ASYNC] = RB_ROOT;
- ad->fifo_expire[REQ_SYNC] = default_read_expire;
- ad->fifo_expire[REQ_ASYNC] = default_write_expire;
+ INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]);
+ INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]);
+ ad->sort_list[BLK_RW_SYNC] = RB_ROOT;
+ ad->sort_list[BLK_RW_ASYNC] = RB_ROOT;
+ ad->fifo_expire[BLK_RW_SYNC] = default_read_expire;
+ ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire;
ad->antic_expire = default_antic_expire;
- ad->batch_expire[REQ_SYNC] = default_read_batch_expire;
- ad->batch_expire[REQ_ASYNC] = default_write_batch_expire;
+ ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire;
+ ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire;
- ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC];
- ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10;
+ ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC];
+ ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10;
if (ad->write_batch_count < 2)
ad->write_batch_count = 2;
struct as_data *ad = e->elevator_data; \
return as_var_show(jiffies_to_msecs((__VAR)), (page)); \
}
-SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]);
SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire);
-SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]);
#undef SHOW_FUNCTION
#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \
*(__PTR) = msecs_to_jiffies(*(__PTR)); \
return ret; \
}
-STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX);
+STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX);
+STORE_FUNCTION(as_write_expire_store,
+ &ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX);
STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX);
STORE_FUNCTION(as_read_batch_expire_store,
- &ad->batch_expire[REQ_SYNC], 0, INT_MAX);
+ &ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX);
STORE_FUNCTION(as_write_batch_expire_store,
- &ad->batch_expire[REQ_ASYNC], 0, INT_MAX);
+ &ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX);
#undef STORE_FUNCTION
#define AS_ATTR(name) \
return -ENXIO;
bio = bio_alloc(GFP_KERNEL, 0);
- if (!bio)
- return -ENOMEM;
-
bio->bi_end_io = bio_end_empty_barrier;
bio->bi_private = &wait;
bio->bi_bdev = bdev;
}
static struct request *
-blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
+blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
blk_rq_init(q, rq);
- rq->cmd_flags = rw | REQ_ALLOCED;
+ rq->cmd_flags = flags | REQ_ALLOCED;
if (priv) {
if (unlikely(elv_set_request(q, rq, gfp_mask))) {
if (priv)
rl->elvpriv++;
+ if (blk_queue_io_stat(q))
+ rw_flags |= REQ_IO_STAT;
spin_unlock_irq(q->queue_lock);
rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
} else {
int idx = bio->bi_idx + next_idx;
- if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
+ if (unlikely(idx >= bio->bi_vcnt)) {
blk_dump_rq_flags(req, "__end_that");
printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
- __func__, bio->bi_idx, bio->bi_vcnt);
+ __func__, idx, bio->bi_vcnt);
break;
}
elv_merge_requests(q, req, next);
- blk_account_io_merge(req);
+ /*
+ * 'next' is going away, so update stats accordingly
+ */
+ blk_account_io_merge(next);
req->ioprio = ioprio_best(req->ioprio, next->ioprio);
if (blk_rq_cpu_valid(next))
/**
* blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q: the request queue for the device
- * @dma_addr: bus address limit
+ * @q: the request queue for the device
+ * @dma_mask: the maximum address the device can handle
*
* Description:
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @dma_addr.
+ * buffers for doing I/O to pages residing above @dma_mask.
**/
-void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
+void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
{
- unsigned long b_pfn = dma_addr >> PAGE_SHIFT;
+ unsigned long b_pfn = dma_mask >> PAGE_SHIFT;
int dma = 0;
q->bounce_gfp = GFP_NOIO;
#if BITS_PER_LONG == 64
- /* Assume anything <= 4GB can be handled by IOMMU.
- Actually some IOMMUs can handle everything, but I don't
- know of a way to test this here. */
- if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ /*
+ * Assume anything <= 4GB can be handled by IOMMU. Actually
+ * some IOMMUs can handle everything, but I don't know of a
+ * way to test this here.
+ */
+ if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
ssize_t ret = queue_var_store(&stats, page, count);
spin_lock_irq(q->queue_lock);
- elv_quisce_start(q);
-
if (stats)
queue_flag_set(QUEUE_FLAG_IO_STAT, q);
else
queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
-
- elv_quisce_end(q);
spin_unlock_irq(q->queue_lock);
return ret;
struct request *rq, *tmp;
LIST_HEAD(list);
+ /*
+ * Not a request based block device, nothing to abort
+ */
+ if (!q->request_fn)
+ return;
+
spin_lock_irqsave(q->queue_lock, flags);
elv_abort_queue(q);
list_for_each_entry_safe(rq, tmp, &list, timeout_list)
blk_abort_request(rq);
+ /*
+ * Occasionally, blk_abort_request() will return without
+ * deleting the element from the list. Make sure we add those back
+ * instead of leaving them on the local stack list.
+ */
+ list_splice(&list, &q->timeout_list);
+
spin_unlock_irqrestore(q->queue_lock, flags);
}
int blk_dev_init(void);
-void elv_quisce_start(struct request_queue *q);
-void elv_quisce_end(struct request_queue *q);
+void elv_quiesce_start(struct request_queue *q);
+void elv_quiesce_end(struct request_queue *q);
/*
static inline int blk_do_io_stat(struct request *rq)
{
- struct gendisk *disk = rq->rq_disk;
-
- if (!disk || !disk->queue)
- return 0;
-
- return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV);
+ return rq->rq_disk && blk_rq_io_stat(rq);
}
#endif
blk_put_request(rq);
if (next_rq) {
blk_rq_unmap_user(next_rq->bio);
+ next_rq->bio = NULL;
blk_put_request(next_rq);
}
return ERR_PTR(ret);
hdr->dout_resid = rq->data_len;
hdr->din_resid = rq->next_rq->data_len;
blk_rq_unmap_user(bidi_bio);
+ rq->next_rq->bio = NULL;
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
hdr->din_resid = rq->data_len;
blk_rq_unmap_user(bio);
if (rq->cmd != rq->__cmd)
kfree(rq->cmd);
+ rq->bio = NULL;
blk_put_request(rq);
return ret;
#define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
#define cfq_class_rt(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
-#define ASYNC (0)
-#define SYNC (1)
-
#define sample_valid(samples) ((samples) > 80)
/*
* rr list of queues with requests and the count of them
*/
struct cfq_rb_root service_tree;
+
+ /*
+ * Each priority tree is sorted by next_request position. These
+ * trees are used when determining if two or more queues are
+ * interleaving requests (see cfq_close_cooperator).
+ */
+ struct rb_root prio_trees[CFQ_PRIO_LISTS];
+
unsigned int busy_queues;
/*
* Used to track any pending rt requests so we can pre-empt current
struct rb_node rb_node;
/* service_tree key */
unsigned long rb_key;
+ /* prio tree member */
+ struct rb_node p_node;
+ /* prio tree root we belong to, if any */
+ struct rb_root *p_root;
/* sorted list of pending requests */
struct rb_root sort_list;
/* if fifo isn't expired, next request to serve */
CFQ_CFQQ_FLAG_prio_changed, /* task priority has changed */
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
+ CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(prio_changed);
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
+CFQ_CFQQ_FNS(coop);
#undef CFQ_CFQQ_FNS
#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
return NULL;
}
+static void rb_erase_init(struct rb_node *n, struct rb_root *root)
+{
+ rb_erase(n, root);
+ RB_CLEAR_NODE(n);
+}
+
static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root)
{
if (root->left == n)
root->left = NULL;
-
- rb_erase(n, &root->rb);
- RB_CLEAR_NODE(n);
+ rb_erase_init(n, &root->rb);
}
/*
* requests waiting to be processed. It is sorted in the order that
* we will service the queues.
*/
-static void cfq_service_tree_add(struct cfq_data *cfqd,
- struct cfq_queue *cfqq, int add_front)
+static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int add_front)
{
struct rb_node **p, *parent;
struct cfq_queue *__cfqq;
rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb);
}
+static struct cfq_queue *
+cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
+ sector_t sector, struct rb_node **ret_parent,
+ struct rb_node ***rb_link)
+{
+ struct rb_node **p, *parent;
+ struct cfq_queue *cfqq = NULL;
+
+ parent = NULL;
+ p = &root->rb_node;
+ while (*p) {
+ struct rb_node **n;
+
+ parent = *p;
+ cfqq = rb_entry(parent, struct cfq_queue, p_node);
+
+ /*
+ * Sort strictly based on sector. Smallest to the left,
+ * largest to the right.
+ */
+ if (sector > cfqq->next_rq->sector)
+ n = &(*p)->rb_right;
+ else if (sector < cfqq->next_rq->sector)
+ n = &(*p)->rb_left;
+ else
+ break;
+ p = n;
+ cfqq = NULL;
+ }
+
+ *ret_parent = parent;
+ if (rb_link)
+ *rb_link = p;
+ return cfqq;
+}
+
+static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+ struct rb_node **p, *parent;
+ struct cfq_queue *__cfqq;
+
+ if (cfqq->p_root) {
+ rb_erase(&cfqq->p_node, cfqq->p_root);
+ cfqq->p_root = NULL;
+ }
+
+ if (cfq_class_idle(cfqq))
+ return;
+ if (!cfqq->next_rq)
+ return;
+
+ cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
+ __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
+ &parent, &p);
+ if (!__cfqq) {
+ rb_link_node(&cfqq->p_node, parent, p);
+ rb_insert_color(&cfqq->p_node, cfqq->p_root);
+ } else
+ cfqq->p_root = NULL;
+}
+
/*
* Update cfqq's position in the service tree.
*/
/*
* Resorting requires the cfqq to be on the RR list already.
*/
- if (cfq_cfqq_on_rr(cfqq))
+ if (cfq_cfqq_on_rr(cfqq)) {
cfq_service_tree_add(cfqd, cfqq, 0);
+ cfq_prio_tree_add(cfqd, cfqq);
+ }
}
/*
if (!RB_EMPTY_NODE(&cfqq->rb_node))
cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+ if (cfqq->p_root) {
+ rb_erase(&cfqq->p_node, cfqq->p_root);
+ cfqq->p_root = NULL;
+ }
BUG_ON(!cfqd->busy_queues);
cfqd->busy_queues--;
{
struct cfq_queue *cfqq = RQ_CFQQ(rq);
struct cfq_data *cfqd = cfqq->cfqd;
- struct request *__alias;
+ struct request *__alias, *prev;
cfqq->queued[rq_is_sync(rq)]++;
/*
* check if this request is a better next-serve candidate
*/
+ prev = cfqq->next_rq;
cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+
+ /*
+ * adjust priority tree position, if ->next_rq changes
+ */
+ if (prev != cfqq->next_rq)
+ cfq_prio_tree_add(cfqd, cfqq);
+
BUG_ON(!cfqq->next_rq);
}
/*
* Get and set a new active queue for service.
*/
-static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
+static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
+ struct cfq_queue *cfqq)
{
- struct cfq_queue *cfqq;
+ if (!cfqq) {
+ cfqq = cfq_get_next_queue(cfqd);
+ if (cfqq)
+ cfq_clear_cfqq_coop(cfqq);
+ }
- cfqq = cfq_get_next_queue(cfqd);
__cfq_set_active_queue(cfqd, cfqq);
return cfqq;
}
return cfqd->last_position - rq->sector;
}
+#define CIC_SEEK_THR 8 * 1024
+#define CIC_SEEKY(cic) ((cic)->seek_mean > CIC_SEEK_THR)
+
static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
{
struct cfq_io_context *cic = cfqd->active_cic;
+ sector_t sdist = cic->seek_mean;
if (!sample_valid(cic->seek_samples))
- return 0;
+ sdist = CIC_SEEK_THR;
+
+ return cfq_dist_from_last(cfqd, rq) <= sdist;
+}
+
+static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
+ struct cfq_queue *cur_cfqq)
+{
+ struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio];
+ struct rb_node *parent, *node;
+ struct cfq_queue *__cfqq;
+ sector_t sector = cfqd->last_position;
+
+ if (RB_EMPTY_ROOT(root))
+ return NULL;
+
+ /*
+ * First, if we find a request starting at the end of the last
+ * request, choose it.
+ */
+ __cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL);
+ if (__cfqq)
+ return __cfqq;
+
+ /*
+ * If the exact sector wasn't found, the parent of the NULL leaf
+ * will contain the closest sector.
+ */
+ __cfqq = rb_entry(parent, struct cfq_queue, p_node);
+ if (cfq_rq_close(cfqd, __cfqq->next_rq))
+ return __cfqq;
+
+ if (__cfqq->next_rq->sector < sector)
+ node = rb_next(&__cfqq->p_node);
+ else
+ node = rb_prev(&__cfqq->p_node);
+ if (!node)
+ return NULL;
- return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
+ __cfqq = rb_entry(node, struct cfq_queue, p_node);
+ if (cfq_rq_close(cfqd, __cfqq->next_rq))
+ return __cfqq;
+
+ return NULL;
}
-static int cfq_close_cooperator(struct cfq_data *cfq_data,
- struct cfq_queue *cfqq)
+/*
+ * cfqd - obvious
+ * cur_cfqq - passed in so that we don't decide that the current queue is
+ * closely cooperating with itself.
+ *
+ * So, basically we're assuming that that cur_cfqq has dispatched at least
+ * one request, and that cfqd->last_position reflects a position on the disk
+ * associated with the I/O issued by cur_cfqq. I'm not sure this is a valid
+ * assumption.
+ */
+static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
+ struct cfq_queue *cur_cfqq,
+ int probe)
{
+ struct cfq_queue *cfqq;
+
+ /*
+ * A valid cfq_io_context is necessary to compare requests against
+ * the seek_mean of the current cfqq.
+ */
+ if (!cfqd->active_cic)
+ return NULL;
+
/*
* We should notice if some of the queues are cooperating, eg
* working closely on the same area of the disk. In that case,
* we can group them together and don't waste time idling.
*/
- return 0;
-}
+ cfqq = cfqq_close(cfqd, cur_cfqq);
+ if (!cfqq)
+ return NULL;
-#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
+ if (cfq_cfqq_coop(cfqq))
+ return NULL;
+
+ if (!probe)
+ cfq_mark_cfqq_coop(cfqq);
+ return cfqq;
+}
static void cfq_arm_slice_timer(struct cfq_data *cfqd)
{
if (!cic || !atomic_read(&cic->ioc->nr_tasks))
return;
- /*
- * See if this prio level has a good candidate
- */
- if (cfq_close_cooperator(cfqd, cfqq) &&
- (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2))
- return;
-
cfq_mark_cfqq_wait_request(cfqq);
/*
sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
- cfq_log(cfqd, "arm_idle: %lu", sl);
+ cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
}
/*
*/
static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
+ struct cfq_queue *cfqq, *new_cfqq = NULL;
cfqq = cfqd->active_queue;
if (!cfqq)
if (!RB_EMPTY_ROOT(&cfqq->sort_list))
goto keep_queue;
+ /*
+ * If another queue has a request waiting within our mean seek
+ * distance, let it run. The expire code will check for close
+ * cooperators and put the close queue at the front of the service
+ * tree.
+ */
+ new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0);
+ if (new_cfqq)
+ goto expire;
+
/*
* No requests pending. If the active queue still has requests in
* flight or is idling for a new request, allow either of these
expire:
cfq_slice_expired(cfqd, 0);
new_queue:
- cfqq = cfq_set_active_queue(cfqd);
+ cfqq = cfq_set_active_queue(cfqd, new_cfqq);
keep_queue:
return cfqq;
}
if (ioc->ioc_data == cic)
rcu_assign_pointer(ioc->ioc_data, NULL);
- if (cic->cfqq[ASYNC]) {
- cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
- cic->cfqq[ASYNC] = NULL;
+ if (cic->cfqq[BLK_RW_ASYNC]) {
+ cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
+ cic->cfqq[BLK_RW_ASYNC] = NULL;
}
- if (cic->cfqq[SYNC]) {
- cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]);
- cic->cfqq[SYNC] = NULL;
+ if (cic->cfqq[BLK_RW_SYNC]) {
+ cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]);
+ cic->cfqq[BLK_RW_SYNC] = NULL;
}
}
spin_lock_irqsave(cfqd->queue->queue_lock, flags);
- cfqq = cic->cfqq[ASYNC];
+ cfqq = cic->cfqq[BLK_RW_ASYNC];
if (cfqq) {
struct cfq_queue *new_cfqq;
- new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC);
+ new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc,
+ GFP_ATOMIC);
if (new_cfqq) {
- cic->cfqq[ASYNC] = new_cfqq;
+ cic->cfqq[BLK_RW_ASYNC] = new_cfqq;
cfq_put_queue(cfqq);
}
}
- cfqq = cic->cfqq[SYNC];
+ cfqq = cic->cfqq[BLK_RW_SYNC];
if (cfqq)
cfq_mark_cfqq_prio_changed(cfqq);
}
RB_CLEAR_NODE(&cfqq->rb_node);
+ RB_CLEAR_NODE(&cfqq->p_node);
INIT_LIST_HEAD(&cfqq->fifo);
atomic_set(&cfqq->ref, 0);
sector_t sdist;
u64 total;
- if (cic->last_request_pos < rq->sector)
+ if (!cic->last_request_pos)
+ sdist = 0;
+ else if (cic->last_request_pos < rq->sector)
sdist = rq->sector - cic->last_request_pos;
else
sdist = cic->last_request_pos - rq->sector;
* Remember that we saw a request from this process, but
* don't start queuing just yet. Otherwise we risk seeing lots
* of tiny requests, because we disrupt the normal plugging
- * and merging.
+ * and merging. If the request is already larger than a single
+ * page, let it rip immediately. For that case we assume that
+ * merging is already done. Ditto for a busy system that
+ * has other work pending, don't risk delaying until the
+ * idle timer unplug to continue working.
*/
- if (cfq_cfqq_wait_request(cfqq))
+ if (cfq_cfqq_wait_request(cfqq)) {
+ if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
+ cfqd->busy_queues > 1) {
+ del_timer(&cfqd->idle_slice_timer);
+ blk_start_queueing(cfqd->queue);
+ }
cfq_mark_cfqq_must_dispatch(cfqq);
+ }
} else if (cfq_should_preempt(cfqd, cfqq, rq)) {
/*
* not the active queue - expire current slice if it is
* or if we want to idle in case it has no pending requests.
*/
if (cfqd->active_queue == cfqq) {
+ const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list);
+
if (cfq_cfqq_slice_new(cfqq)) {
cfq_set_prio_slice(cfqd, cfqq);
cfq_clear_cfqq_slice_new(cfqq);
}
+ /*
+ * If there are no requests waiting in this queue, and
+ * there are other queues ready to issue requests, AND
+ * those other queues are issuing requests within our
+ * mean seek distance, give them a chance to run instead
+ * of idling.
+ */
if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
cfq_slice_expired(cfqd, 1);
- else if (sync && !rq_noidle(rq) &&
- RB_EMPTY_ROOT(&cfqq->sort_list)) {
+ else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) &&
+ sync && !rq_noidle(rq))
cfq_arm_slice_timer(cfqd);
- }
}
if (!cfqd->rq_in_driver)
if (!cic)
return ELV_MQUEUE_MAY;
- cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC);
+ cfqq = cic_to_cfqq(cic, rw_is_sync(rw));
if (cfqq) {
cfq_init_prio_data(cfqq, cic->ioc);
cfq_prio_boost(cfqq);
struct cfq_data *cfqd =
container_of(work, struct cfq_data, unplug_work);
struct request_queue *q = cfqd->queue;
- unsigned long flags;
- spin_lock_irqsave(q->queue_lock, flags);
+ spin_lock_irq(q->queue_lock);
blk_start_queueing(q);
- spin_unlock_irqrestore(q->queue_lock, flags);
+ spin_unlock_irq(q->queue_lock);
}
/*
static void *cfq_init_queue(struct request_queue *q)
{
struct cfq_data *cfqd;
+ int i;
cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
if (!cfqd)
return NULL;
cfqd->service_tree = CFQ_RB_ROOT;
+
+ /*
+ * Not strictly needed (since RB_ROOT just clears the node and we
+ * zeroed cfqd on alloc), but better be safe in case someone decides
+ * to add magic to the rb code
+ */
+ for (i = 0; i < CFQ_PRIO_LISTS; i++)
+ cfqd->prio_trees[i] = RB_ROOT;
+
INIT_LIST_HEAD(&cfqd->cic_list);
cfqd->queue = q;
/*
* Call with queue lock held, interrupts disabled
*/
-void elv_quisce_start(struct request_queue *q)
+void elv_quiesce_start(struct request_queue *q)
{
queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
}
}
-void elv_quisce_end(struct request_queue *q)
+void elv_quiesce_end(struct request_queue *q)
{
queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
}
* Turn on BYPASS and drain all requests w/ elevator private data
*/
spin_lock_irq(q->queue_lock);
- elv_quisce_start(q);
+ elv_quiesce_start(q);
/*
* Remember old elevator.
*/
elevator_exit(old_elevator);
spin_lock_irq(q->queue_lock);
- elv_quisce_end(q);
+ elv_quiesce_end(q);
spin_unlock_irq(q->queue_lock);
blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
if (flags & DISK_PITER_REVERSE)
piter->idx = ptbl->len - 1;
- else if (flags & DISK_PITER_INCL_PART0)
+ else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0))
piter->idx = 0;
else
piter->idx = 1;
/* determine iteration parameters */
if (piter->flags & DISK_PITER_REVERSE) {
inc = -1;
- if (piter->flags & DISK_PITER_INCL_PART0)
+ if (piter->flags & (DISK_PITER_INCL_PART0 |
+ DISK_PITER_INCL_EMPTY_PART0))
end = -1;
else
end = 0;
part = rcu_dereference(ptbl->part[piter->idx]);
if (!part)
continue;
- if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects)
+ if (!part->nr_sects &&
+ !(piter->flags & DISK_PITER_INCL_EMPTY) &&
+ !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 &&
+ piter->idx == 0))
continue;
get_device(part_to_dev(part));
"\n\n");
*/
- disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0);
+ disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0);
while ((hd = disk_part_iter_next(&piter))) {
cpu = part_stat_lock();
part_round_stats(cpu, hd);
struct bio *bio;
bio = bio_alloc(GFP_KERNEL, 0);
- if (!bio)
- return -ENOMEM;
bio->bi_end_io = blk_ioc_discard_endio;
bio->bi_bdev = bdev;
static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
struct bio *bio)
{
- int ret = 0;
+ int r, ret = 0;
/*
* fill in all the output members
ret = -EFAULT;
}
- blk_rq_unmap_user(bio);
+ r = blk_rq_unmap_user(bio);
+ if (!ret)
+ ret = r;
blk_put_request(rq);
return ret;
if (hdr->iovec_count) {
const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
+ size_t iov_data_len;
struct sg_iovec *iov;
iov = kmalloc(size, GFP_KERNEL);
goto out;
}
+ /* SG_IO howto says that the shorter of the two wins */
+ iov_data_len = iov_length((struct iovec *)iov,
+ hdr->iovec_count);
+ if (hdr->dxfer_len < iov_data_len) {
+ hdr->iovec_count = iov_shorten((struct iovec *)iov,
+ hdr->iovec_count,
+ hdr->dxfer_len);
+ iov_data_len = hdr->dxfer_len;
+ }
+
ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
- hdr->dxfer_len, GFP_KERNEL);
+ iov_data_len, GFP_KERNEL);
kfree(iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
if (err)
return err;
- walk->offset = 0;
-
- if (nbytes)
+ if (nbytes) {
+ walk->offset = 0;
+ walk->pg++;
return hash_walk_next(walk);
+ }
if (!walk->total)
return 0;
request_module(name);
- if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+ if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
+ CRYPTO_ALG_NEED_FALLBACK) &&
snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
request_module(tmp);
if (err)
goto out;
- eseqiv_complete2(req);
+ if (giv != req->giv)
+ eseqiv_complete2(req);
out:
return err;
obj-y += serial/
obj-$(CONFIG_PARPORT) += parport/
-obj-y += base/ block/ misc/ mfd/ media/
+obj-y += base/ block/ misc/ mfd/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_RTC_LIB) += rtc/
-obj-y += i2c/
+obj-y += i2c/ media/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
ccflags-y := -Os
ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
-obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y += acpi.o
+
+acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o \
dsinit.o
-obj-y += evevent.o evregion.o evsci.o evxfevnt.o \
+acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \
evmisc.o evrgnini.o evxface.o evxfregn.o \
evgpe.o evgpeblk.o
-obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
+acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\
excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \
exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o
-obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
-obj-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
+acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \
nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \
nsparse.o nspredef.o
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
-obj-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \
+acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \
psopcode.o psscope.o psutils.o psxface.o
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
rscalc.o rsirq.o rsmemory.o rsutils.o
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
utstate.o utmutex.o utobject.o utresrc.o utlock.o
/* For control registers, both ignored and reserved bits must be preserved */
-#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bits 9 */
#define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */
#define ACPI_PM1_CONTROL_PRESERVED_BITS \
(ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state
return_ACPI_STATUS(status);
}
- /* Execute the _GTS method */
+ if (gts) {
+ /* Execute the _GTS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
+ status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ return_ACPI_STATUS(status);
+ }
}
/* Get current value of PM1A control */
}
}
- /* Execute the _BFS method */
+ if (bfs) {
+ /* Execute the _BFS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ }
}
-
return_ACPI_STATUS(status);
}
ACPI_ERROR((AE_INFO,
"Illegal I/O port address/length above 64K: 0x%p/%X",
ACPI_CAST_PTR(void, address), byte_width));
- return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ return_ACPI_STATUS(AE_LIMIT);
}
/* Exit if requested address is not within the protected port table */
/* Port illegality may depend on the _OSI calls made by the BIOS */
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
- ACPI_ERROR((AE_INFO,
- "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
- ACPI_CAST_PTR(void, address),
- byte_width, port_info->name,
- port_info->start, port_info->end));
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
+ ACPI_CAST_PTR(void, address),
+ byte_width, port_info->name,
+ port_info->start,
+ port_info->end));
return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
}
* Value Where value is placed
* Width Number of bits
*
- * RETURN: Value read from port
+ * RETURN: Status and value read from port
*
* DESCRIPTION: Read data from an I/O port or register. This is a front-end
* to acpi_os_read_port that performs validation on both the port
acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
{
acpi_status status;
+ u32 one_byte;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_read_port(address, value, width);
return status;
}
- status = acpi_os_read_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0, *value = 0; i < width; i += 8) {
+
+ /* Validate and read one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status = acpi_os_read_port(address, &one_byte, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+
+ *value |= (one_byte << i);
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
/******************************************************************************
* Value Value to write
* Width Number of bits
*
- * RETURN: None
+ * RETURN: Status
*
* DESCRIPTION: Write data to an I/O port or register. This is a front-end
* to acpi_os_write_port that performs validation on both the port
acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
{
acpi_status status;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_write_port(address, value, width);
return status;
}
- status = acpi_os_write_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0; i < width; i += 8) {
+
+ /* Validate and write one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status =
+ acpi_os_write_port(address, (value >> i) & 0xFF, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
package_element = *top_object_list;
+ /* We must have a valid Package object */
+
+ if (!package_element ||
+ (package_element->common.type != ACPI_TYPE_PACKAGE)) {
+ return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+ }
+
/*
* The sub_object_list will now point to an array of the
* four IRQ elements: Address, Pin, Source and source_index
user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
for (index = 0; index < number_of_elements; index++) {
- int source_name_index = 2;
- int source_index_index = 3;
/*
* Point user_prt past this current structure
return_ACPI_STATUS(AE_BAD_DATA);
}
- /*
- * If BIOS erroneously reversed the _PRT source_name and source_index,
- * then reverse them back.
- */
- if ((sub_object_list[3])->common.type !=
- ACPI_TYPE_INTEGER) {
- if (acpi_gbl_enable_interpreter_slack) {
- source_name_index = 3;
- source_index_index = 2;
- printk(KERN_WARNING
- "ACPI: Handling Garbled _PRT entry\n");
- } else {
- ACPI_ERROR((AE_INFO,
- "(PRT[%X].source_index) Need Integer, found %s",
- index,
- acpi_ut_get_object_type_name
- (sub_object_list[3])));
- return_ACPI_STATUS(AE_BAD_DATA);
- }
- }
-
user_prt->pin = (u32) obj_desc->integer.value;
/*
* 3) Third subobject: Dereference the PRT.source_name
* The name may be unresolved (slack mode), so allow a null object
*/
- obj_desc = sub_object_list[source_name_index];
+ obj_desc = sub_object_list[2];
if (obj_desc) {
switch (obj_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
/* 4) Fourth subobject: Dereference the PRT.source_index */
- obj_desc = sub_object_list[source_index_index];
+ obj_desc = sub_object_list[3];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
"(PRT[%X].SourceIndex) Need Integer, found %s",
end:
if (result)
printk(KERN_WARNING PREFIX
- "Transitioning device [%s] to D%d\n",
+ "Device [%s] failed to transition to D%d\n",
device->pnp.bus_id, state);
else {
device->power.state = state;
/*
- * acpi_button.c - ACPI Button Driver ($Revision: 30 $)
+ * button.c - ACPI Button Driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
#define ACPI_BUTTON_SUBCLASS_POWER "power"
#define ACPI_BUTTON_HID_POWER "PNP0C0C"
-#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF "Power Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button"
#define ACPI_BUTTON_TYPE_POWER 0x01
-#define ACPI_BUTTON_TYPE_POWERF 0x02
#define ACPI_BUTTON_SUBCLASS_SLEEP "sleep"
#define ACPI_BUTTON_HID_SLEEP "PNP0C0E"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF "Sleep Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button"
#define ACPI_BUTTON_TYPE_SLEEP 0x03
-#define ACPI_BUTTON_TYPE_SLEEPF 0x04
#define ACPI_BUTTON_SUBCLASS_LID "lid"
#define ACPI_BUTTON_HID_LID "PNP0C0D"
};
struct acpi_button {
- struct acpi_device *device; /* Fixed button kludge */
unsigned int type;
struct input_dev *input;
char phys[32]; /* for input device */
static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
-
- if (!button || !button->device)
- return 0;
+ struct acpi_device *device = seq->private;
seq_printf(seq, "type: %s\n",
- acpi_device_name(button->device));
-
+ acpi_device_name(device));
return 0;
}
static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
+ struct acpi_device *device = seq->private;
acpi_status status;
unsigned long long state;
- if (!button || !button->device)
- return 0;
-
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
seq_printf(seq, "state: %s\n",
ACPI_FAILURE(status) ? "unsupported" :
(state ? "open" : "closed"));
static int acpi_button_add_fs(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
struct proc_dir_entry *entry = NULL;
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
if (!acpi_power_dir)
acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER,
acpi_button_dir);
entry = acpi_power_dir;
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
if (!acpi_sleep_dir)
acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP,
acpi_button_dir);
/* 'info' [R] */
entry = proc_create_data(ACPI_BUTTON_FILE_INFO,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_info_fops,
- acpi_driver_data(device));
+ &acpi_button_info_fops, device);
if (!entry)
return -ENODEV;
if (button->type == ACPI_BUTTON_TYPE_LID) {
entry = proc_create_data(ACPI_BUTTON_FILE_STATE,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_state_fops,
- acpi_driver_data(device));
+ &acpi_button_state_fops, device);
if (!entry)
return -ENODEV;
}
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_lid_send_state(struct acpi_button *button)
+static int acpi_lid_send_state(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
unsigned long long state;
acpi_status status;
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
- &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
if (ACPI_FAILURE(status))
return -ENODEV;
+
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
input_sync(button->input);
struct acpi_button *button = acpi_driver_data(device);
struct input_dev *input;
- if (!button || !button->device)
- return;
-
switch (event) {
case ACPI_FIXED_HARDWARE_EVENT:
event = ACPI_BUTTON_NOTIFY_STATUS;
case ACPI_BUTTON_NOTIFY_STATUS:
input = button->input;
if (button->type == ACPI_BUTTON_TYPE_LID) {
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
} else {
int keycode = test_bit(KEY_SLEEP, input->keybit) ?
KEY_SLEEP : KEY_POWER;
input_sync(input);
}
- acpi_bus_generate_proc_event(button->device, event,
- ++button->pushed);
+ acpi_bus_generate_proc_event(device, event, ++button->pushed);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_button_resume(struct acpi_device *device)
{
- struct acpi_button *button;
- if (!device)
- return -EINVAL;
- button = acpi_driver_data(device);
- if (button && button->type == ACPI_BUTTON_TYPE_LID)
- return acpi_lid_send_state(button);
+ struct acpi_button *button = acpi_driver_data(device);
+
+ if (button->type == ACPI_BUTTON_TYPE_LID)
+ return acpi_lid_send_state(device);
return 0;
}
static int acpi_button_add(struct acpi_device *device)
{
- int error;
struct acpi_button *button;
struct input_dev *input;
-
- if (!device)
- return -EINVAL;
+ char *hid, *name, *class;
+ int error;
button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
if (!button)
return -ENOMEM;
- button->device = device;
device->driver_data = button;
button->input = input = input_allocate_device();
goto err_free_button;
}
- /*
- * Determine the button type (via hid), as fixed-feature buttons
- * need to be handled a bit differently than generic-space.
- */
- if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+ hid = acpi_device_hid(device);
+ name = acpi_device_name(device);
+ class = acpi_device_class(device);
+
+ if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
+ !strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
button->type = ACPI_BUTTON_TYPE_POWER;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
- button->type = ACPI_BUTTON_TYPE_POWERF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_POWERF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
+ !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
button->type = ACPI_BUTTON_TYPE_SLEEP;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
- button->type = ACPI_BUTTON_TYPE_SLEEPF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_SLEEPF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
button->type = ACPI_BUTTON_TYPE_LID;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
} else {
- printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
- acpi_device_hid(device));
+ printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
error = -ENODEV;
goto err_free_input;
}
if (error)
goto err_free_input;
- snprintf(button->phys, sizeof(button->phys),
- "%s/button/input0", acpi_device_hid(device));
+ snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
- input->name = acpi_device_name(device);
+ input->name = name;
input->phys = button->phys;
input->id.bustype = BUS_HOST;
input->id.product = button->type;
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_POWER, input->keybit);
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_SLEEP, input->keybit);
break;
if (error)
goto err_remove_fs;
if (button->type == ACPI_BUTTON_TYPE_LID)
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
device->wakeup.state.enabled = 1;
}
- printk(KERN_INFO PREFIX "%s [%s]\n",
- acpi_device_name(device), acpi_device_bid(device));
-
+ printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
return 0;
err_remove_fs:
static int acpi_button_remove(struct acpi_device *device, int type)
{
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
+ struct acpi_button *button = acpi_driver_data(device);
acpi_button_remove_fs(device);
input_unregister_device(button->input);
kfree(button);
-
return 0;
}
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
if (!acpi_button_dir)
return -ENODEV;
+
result = acpi_bus_register_driver(&acpi_button_driver);
if (result < 0) {
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
+ set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
if (handled) {
acpi_irq_handled++;
return IRQ_HANDLED;
- } else
+ } else {
+ acpi_irq_not_handled++;
return IRQ_NONE;
+ }
}
acpi_status
struct acpi_pci_data *pdata;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
- struct pci_dev *dev;
- struct pci_bus *bus;
-
if (!device || !device->parent)
return -EINVAL;
* Locate matching device in PCI namespace. If it doesn't exist
* this typically means that the device isn't currently inserted
* (e.g. docking station, port replicator, etc.).
- * We cannot simply search the global pci device list, since
- * PCI devices are added to the global pci list when the root
- * bridge start ops are run, which may not have happened yet.
*/
- bus = pci_find_bus(data->id.segment, data->id.bus);
- if (bus) {
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->devfn == PCI_DEVFN(data->id.device,
- data->id.function)) {
- data->dev = dev;
- break;
- }
- }
- }
+ data->dev = pci_get_slot(pdata->bus,
+ PCI_DEVFN(data->id.device, data->id.function));
if (!data->dev) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d not present in PCI namespace\n",
end:
kfree(buffer.pointer);
- if (result)
+ if (result) {
+ pci_dev_put(data->dev);
kfree(data);
-
+ }
return result;
}
if (data->dev->subordinate) {
acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
}
+ pci_dev_put(data->dev);
kfree(data);
end:
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
- acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
+ acpi_register_gsi(&dev->dev, dev->irq,
+ ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
return 0;
} else {
}
}
- rc = acpi_register_gsi(gsi, triggering, polarity);
+ rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (rc < 0) {
dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
pin_name(pin));
}
#endif /* HAVE_ACPI_LEGACY_ALARM */
-extern struct list_head acpi_wakeup_device_list;
-extern spinlock_t acpi_device_lock;
-
static int
acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset)
{
seq_printf(seq, "Device\tS-state\t Status Sysfs node\n");
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
if (!dev->wakeup.flags.valid)
continue;
- spin_unlock(&acpi_device_lock);
ldev = acpi_get_physical_device(dev->handle);
seq_printf(seq, "%s\t S%d\t%c%-8s ",
seq_printf(seq, "\n");
put_device(ldev);
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return 0;
}
strbuf[len] = '\0';
sscanf(strbuf, "%s", str);
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
}
}
}
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return count;
}
if (!pr)
return -ENOMEM;
- if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
kfree(pr);
return -ENOMEM;
}
struct acpi_processor_power *pwr = &pr->power;
u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;
+ if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
+ return;
+
+ if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ type = ACPI_STATE_C1;
+
/*
* Check, if one of the previous states already marked the lapic
* unstable
* Suspend / resume control
*/
static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+ acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+ u32 resumed_bm_rld;
+
+ acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+ if (resumed_bm_rld != saved_bm_rld)
+ acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
+ if (acpi_idle_suspend == 1)
+ return 0;
+
+ acpi_idle_bm_rld_save();
acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
+ if (acpi_idle_suspend == 0)
+ return 0;
+
+ acpi_idle_bm_rld_restore();
acpi_idle_suspend = 0;
return 0;
}
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
* C/P/S0/S1 states when this bit is set.
*/
if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
- return 0;
+ return;
/*FALL THROUGH*/
default:
- return state > ACPI_STATE_C1;
+ /* TSC could halt in idle, so notify users */
+ if (state > ACPI_STATE_C1)
+ mark_tsc_unstable("TSC halts in idle");
}
}
+#else
+static void tsc_check_state(int state) { return; }
#endif
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
pr->power.timer_broadcast_on_state = INT_MAX;
- for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+ for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
+ acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
acpi_timer_check_state(i, pr, cx);
break;
}
+ if (cx->valid)
+ tsc_check_state(cx->type);
if (cx->valid)
working++;
seq_printf(seq, "active state: C%zd\n"
"max_cstate: C%d\n"
- "bus master activity: %08x\n"
"maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
- max_cstate, (unsigned)pr->power.bm_activity,
- pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
+ max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
/* Do not access any ACPI IO ports in suspend path */
if (acpi_idle_suspend) {
- acpi_safe_halt();
local_irq_enable();
+ cpu_relax();
return 0;
}
+ acpi_state_timer_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
local_irq_enable();
cx->usage++;
+ acpi_state_timer_broadcast(pr, cx, 0);
return idle_time;
}
kt2 = ktime_get_real();
idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(cx->type))
- mark_tsc_unstable("TSC halts in idle");;
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
*/
acpi_state_timer_broadcast(pr, cx, 1);
+ kt1 = ktime_get_real();
/*
* disable bus master
* bm_check implies we need ARB_DIS
ACPI_FLUSH_CPU_CACHE();
}
- kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
/* Re-enable bus master arbitration */
if (pr->flags.bm_check && pr->flags.bm_control) {
c3_cpu_count--;
spin_unlock(&c3_lock);
}
+ kt2 = ktime_get_real();
+ idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(ACPI_STATE_C3))
- mark_tsc_unstable("TSC halts in idle");
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
dev->states[i].desc[0] = '\0';
}
+ if (max_cstate == 0)
+ max_cstate = 1;
+
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
(u32) px->bus_master_latency,
(u32) px->control, (u32) px->status));
- if (!px->core_frequency) {
- printk(KERN_ERR PREFIX
- "Invalid _PSS data: freq is zero\n");
+ /*
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ */
+ if (!px->core_frequency ||
+ ((u32)(px->core_frequency * 1000) !=
+ (px->core_frequency * 1000))) {
+ printk(KERN_ERR FW_BUG PREFIX
+ "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
+ px->core_frequency);
result = -EFAULT;
kfree(pr->performance->states);
goto end;
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
+/* ignore_tpc:
+ * 0 -> acpi processor driver doesn't ignore _TPC values
+ * 1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
struct throttling_tstate {
unsigned int cpu; /* cpu nr */
int target_state; /* target T-state */
if (!pr)
return -EINVAL;
+
+ if (ignore_tpc)
+ goto end;
+
status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
}
return -ENODEV;
}
+
+end:
pr->throttling_platform_limit = (int)tpc;
return 0;
}
struct acpi_processor_limit *limit;
int target_state;
+ if (ignore_tpc)
+ return 0;
+
result = acpi_processor_get_platform_limit(pr);
if (result) {
/* Throttling Limit is unsupported */
ret = acpi_read_throttling_status(pr, &value);
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
+ if (state == -1) {
+ ACPI_WARNING((AE_INFO,
+ "Invalid throttling state, reset"));
+ state = 0;
+ ret = acpi_processor_set_throttling(pr, state);
+ if (ret)
+ return ret;
+ }
pr->throttling.state = state;
}
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
-DEFINE_SPINLOCK(acpi_device_lock);
+DEFINE_MUTEX(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
struct acpi_device_bus_id{
*/
INIT_LIST_HEAD(&device->children);
INIT_LIST_HEAD(&device->node);
- INIT_LIST_HEAD(&device->g_list);
INIT_LIST_HEAD(&device->wakeup_list);
new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
return -ENOMEM;
}
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
/*
* Find suitable bus_id and instance number in acpi_bus_id_list
* If failed, create one and link it into acpi_bus_id_list
}
dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
- if (device->parent) {
+ if (device->parent)
list_add_tail(&device->node, &device->parent->children);
- list_add_tail(&device->g_list, &device->parent->g_list);
- } else
- list_add_tail(&device->g_list, &acpi_device_list);
+
if (device->wakeup.flags.valid)
list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list);
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
if (device->parent)
device->dev.parent = &parent->dev;
device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
return 0;
end:
- spin_lock(&acpi_device_lock);
- if (device->parent) {
+ mutex_lock(&acpi_device_lock);
+ if (device->parent)
list_del(&device->node);
- list_del(&device->g_list);
- } else
- list_del(&device->g_list);
list_del(&device->wakeup_list);
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return result;
}
static void acpi_device_unregister(struct acpi_device *device, int type)
{
- spin_lock(&acpi_device_lock);
- if (device->parent) {
+ mutex_lock(&acpi_device_lock);
+ if (device->parent)
list_del(&device->node);
- list_del(&device->g_list);
- } else
- list_del(&device->g_list);
list_del(&device->wakeup_list);
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
acpi_detach_data(device->handle, acpi_bus_data_handler);
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_pm_prepare,
+ .prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
};
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare = acpi_pm_disable_gpes,
+ .prepare_late = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
acpi_enter_sleep_state(ACPI_STATE_S5);
}
+/*
+ * ACPI 2.0 created the optional _GTS and _BFS,
+ * but industry adoption has been neither rapid nor broad.
+ *
+ * Linux gets into trouble when it executes poorly validated
+ * paths through the BIOS, so disable _GTS and _BFS by default,
+ * but do speak up and offer the option to enable them.
+ */
+void __init acpi_gts_bfs_check(void)
+{
+ acpi_handle dummy;
+
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+}
+
int __init acpi_sleep_init(void)
{
acpi_status status;
* object can also be evaluated when the system enters S5.
*/
register_reboot_notifier(&tts_notifier);
+ acpi_gts_bfs_check();
return 0;
}
extern void acpi_enable_wakeup_device_prep(u8 sleep_state);
extern void acpi_enable_wakeup_device(u8 sleep_state);
extern void acpi_disable_wakeup_device(u8 sleep_state);
+
+extern struct list_head acpi_wakeup_device_list;
+extern struct mutex acpi_device_lock;
#define ACPI_SYSTEM_DEVICE_NAME "System"
u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
/*
* Make ACPICA version work as module param
#define COUNT_GPE 0
#define COUNT_SCI 1 /* acpi_irq_handled */
-#define COUNT_ERROR 2 /* other */
-#define NUM_COUNTERS_EXTRA 3
+#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */
+#define COUNT_ERROR 3 /* other */
+#define NUM_COUNTERS_EXTRA 4
struct event_counter {
u32 count;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
acpi_irq_handled;
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+ acpi_irq_not_handled;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
acpi_gpe_count;
all_counters[i].count = 0;
acpi_gpe_count = 0;
acpi_irq_handled = 0;
+ acpi_irq_not_handled = 0;
goto end;
}
sprintf(buffer, "gpe_all");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
sprintf(buffer, "sci");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+ sprintf(buffer, "sci_not");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
sprintf(buffer, "error");
else
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
static int acpi_thermal_resume(struct acpi_device *device);
+static void acpi_thermal_notify(struct acpi_device *device, u32 event);
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
.resume = acpi_thermal_resume,
+ .notify = acpi_thermal_notify,
},
};
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
+ int kelvin_offset;
struct mutex lock;
};
}
/* sys I/F for generic thermal sysfs support */
-#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
+#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
static int thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
if (result)
return result;
- *temp = KELVIN_TO_MILLICELSIUS(tz->temperature);
+ *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
return 0;
}
if (tz->trips.critical.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
if (tz->trips.hot.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.hot.temperature);
+ tz->trips.hot.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
if (tz->trips.passive.flags.valid) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.passive.temperature);
+ tz->trips.passive.temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
*temp = KELVIN_TO_MILLICELSIUS(
- tz->trips.active[i].temperature);
+ tz->trips.active[i].temperature,
+ tz->kelvin_offset);
return 0;
}
trip--;
if (tz->trips.critical.flags.valid) {
*temperature = KELVIN_TO_MILLICELSIUS(
- tz->trips.critical.temperature);
+ tz->trips.critical.temperature,
+ tz->kelvin_offset);
return 0;
} else
return -EINVAL;
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
- tz->polling_frequency);
+ tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
Driver Interface
-------------------------------------------------------------------------- */
-static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_thermal_notify(struct acpi_device *device, u32 event)
{
- struct acpi_thermal *tz = data;
- struct acpi_device *device = NULL;
+ struct acpi_thermal *tz = acpi_driver_data(device);
if (!tz)
return;
- device = tz->device;
-
switch (event) {
case ACPI_THERMAL_NOTIFY_TEMPERATURE:
acpi_thermal_check(tz);
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_thermal_get_info(struct acpi_thermal *tz)
return 0;
}
+/*
+ * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI
+ * handles temperature values with a single decimal place. As a consequence,
+ * some implementations use an offset of 273.1 and others use an offset of
+ * 273.2. Try to find out which one is being used, to present the most
+ * accurate and visually appealing number.
+ *
+ * The heuristic below should work for all ACPI thermal zones which have a
+ * critical trip point with a value being a multiple of 0.5 degree Celsius.
+ */
+static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
+{
+ if (tz->trips.critical.flags.valid &&
+ (tz->trips.critical.temperature % 5) == 1)
+ tz->kelvin_offset = 2731;
+ else
+ tz->kelvin_offset = 2732;
+}
+
static int acpi_thermal_add(struct acpi_device *device)
{
int result = 0;
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
if (result)
goto free_memory;
+ acpi_thermal_guess_offset(tz);
+
result = acpi_thermal_register_thermal_zone(tz);
if (result)
goto free_memory;
if (result)
goto unregister_thermal_zone;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify, tz);
- if (ACPI_FAILURE(status)) {
- result = -ENODEV;
- goto remove_fs;
- }
-
printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n",
acpi_device_name(device), acpi_device_bid(device),
KELVIN_TO_CELSIUS(tz->temperature));
goto end;
-remove_fs:
- acpi_thermal_remove_fs(device);
unregister_thermal_zone:
thermal_zone_device_unregister(tz->thermal_zone);
free_memory:
static int acpi_thermal_remove(struct acpi_device *device, int type)
{
- acpi_status status = AE_OK;
struct acpi_thermal *tz = NULL;
if (!device || !acpi_driver_data(device))
tz = acpi_driver_data(device);
- status = acpi_remove_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_thermal_notify);
-
acpi_thermal_remove_fs(device);
acpi_thermal_unregister_thermal_zone(tz);
mutex_destroy(&tz->lock);
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_resume(struct acpi_device *device);
+static void acpi_video_bus_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id video_device_ids[] = {
{ACPI_VIDEO_HID, 0},
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
.resume = acpi_video_resume,
+ .notify = acpi_video_bus_notify,
},
};
return -EINVAL;
}
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+ bqc_offset_aml_bug_workaround = 9;
+ return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+ /*
+ * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+ */
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5710Z",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "eMachines E510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5315",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ },
+ },
+ {}
+};
+
static int
acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
unsigned long long *level)
*level = device->brightness->levels[*level + 2];
}
+ *level += bqc_offset_aml_bug_workaround;
device->brightness->curr = *level;
return 0;
} else {
* In this case, the first two elements in _BCL packages
* are also supported brightness levels that OS should take care of.
*/
- for (i = 2; i < count; i++)
- if (br->levels[i] == br->levels[0] ||
- br->levels[i] == br->levels[1])
+ for (i = 2; i < count; i++) {
+ if (br->levels[i] == br->levels[0])
+ level_ac_battery++;
+ if (br->levels[i] == br->levels[1])
level_ac_battery++;
+ }
if (level_ac_battery < 2) {
level_ac_battery = 2 - level_ac_battery;
br->flags._BCM_use_index = br->flags._BCL_use_index;
/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
- br->curr = max_level;
+ br->curr = level_old = max_level;
+
+ if (!device->cap._BQC)
+ goto set_level;
+
result = acpi_video_device_lcd_get_level_current(device, &level_old);
if (result)
goto out_free_levels;
- result = acpi_video_device_lcd_set_level(device, br->curr);
+ /*
+ * Set the level to maximum and check if _BQC uses indexed value
+ */
+ result = acpi_video_device_lcd_set_level(device, max_level);
if (result)
goto out_free_levels;
if (result)
goto out_free_levels;
- if ((level != level_old) && !br->flags._BCM_use_index) {
- /* Note:
- * This piece of code does not work correctly if the current
- * brightness levels is 0.
- * But I guess boxes that boot with such a dark screen are rare
- * and no more code is needed to cover this specifial case.
- */
-
- if (level_ac_battery != 2) {
- /*
- * For now, we don't support the _BCL like this:
- * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
- * because we may mess up the index returned by _BQC.
- * Plus: we have not got a box like this.
- */
- ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
- }
- br->flags._BQC_use_index = 1;
- }
+ br->flags._BQC_use_index = (level == max_level ? 0 : 1);
+
+ if (!br->flags._BQC_use_index)
+ goto set_level;
+
+ if (br->flags._BCL_reversed)
+ level_old = (br->count - 1) - level_old;
+ level_old = br->levels[level_old];
+
+set_level:
+ result = acpi_video_device_lcd_set_level(device, level_old);
+ if (result)
+ goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"found %d brightness levels\n", count - 2));
return acpi_video_bus_DOS(video, 0, 1);
}
-static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
{
- struct acpi_video_bus *video = data;
- struct acpi_device *device = NULL;
+ struct acpi_video_bus *video = acpi_driver_data(device);
struct input_dev *input;
int keycode;
if (!video)
return;
- device = video->device;
input = video->input;
switch (event) {
static int acpi_video_bus_add(struct acpi_device *device)
{
- acpi_status status;
struct acpi_video_bus *video;
struct input_dev *input;
int error;
acpi_video_bus_get_devices(video, device);
acpi_video_bus_start_devices(video);
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify, video);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX
- "Error installing notify handler\n");
- error = -ENODEV;
- goto err_stop_video;
- }
-
video->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_uninstall_notify;
+ goto err_stop_video;
}
snprintf(video->phys, sizeof(video->phys),
err_free_input_dev:
input_free_device(input);
- err_uninstall_notify:
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify);
err_stop_video:
acpi_video_bus_stop_devices(video);
acpi_video_bus_put_devices(video);
static int acpi_video_bus_remove(struct acpi_device *device, int type)
{
- acpi_status status = 0;
struct acpi_video_bus *video = NULL;
video = acpi_driver_data(device);
acpi_video_bus_stop_devices(video);
-
- status = acpi_remove_notify_handler(video->device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_video_bus_notify);
-
acpi_video_bus_put_devices(video);
acpi_video_bus_remove_fs(device);
static int __init acpi_video_init(void)
{
+ dmi_check_system(video_dmi_table);
+
if (intel_opregion_present())
return 0;
return acpi_video_register();
}
-static void __exit acpi_video_exit(void)
+void acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
return;
}
+EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
#include "internal.h"
#include "sleep.h"
+/*
+ * We didn't lock acpi_device_lock in the file, because it invokes oops in
+ * suspend/resume and isn't really required as this is called in S-state. At
+ * that time, there is no device hotplug
+ **/
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("wakeup_devices")
-extern struct list_head acpi_wakeup_device_list;
-extern spinlock_t acpi_device_lock;
-
/**
* acpi_enable_wakeup_device_prep - prepare wakeup devices
* @sleep_state: ACPI state
{
struct list_head *node, *next;
- spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
struct acpi_device,
(sleep_state > (u32) dev->wakeup.sleep_state))
continue;
- spin_unlock(&acpi_device_lock);
acpi_enable_wakeup_device_power(dev, sleep_state);
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
}
/**
* Caution: this routine must be invoked when interrupt is disabled
* Refer ACPI2.0: P212
*/
- spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
|| sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
- spin_unlock(&acpi_device_lock);
/* set_gpe_type will disable GPE, leave it like that */
acpi_set_gpe_type(dev->wakeup.gpe_device,
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_RUNTIME);
- spin_lock(&acpi_device_lock);
}
continue;
}
- spin_unlock(&acpi_device_lock);
if (!dev->wakeup.flags.run_wake)
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
}
/**
{
struct list_head *node, *next;
- spin_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev =
container_of(node, struct acpi_device, wakeup_list);
if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared)
|| sleep_state > (u32) dev->wakeup.sleep_state) {
if (dev->wakeup.flags.run_wake) {
- spin_unlock(&acpi_device_lock);
acpi_set_gpe_type(dev->wakeup.gpe_device,
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_WAKE_RUN);
/* Re-enable it, since set_gpe_type will disable it */
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
- spin_lock(&acpi_device_lock);
}
continue;
}
- spin_unlock(&acpi_device_lock);
acpi_disable_wakeup_device_power(dev);
/* Never disable run-wake GPE */
if (!dev->wakeup.flags.run_wake) {
acpi_clear_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number, ACPI_NOT_ISR);
}
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
}
int __init acpi_wakeup_device_init(void)
{
struct list_head *node, *next;
- spin_lock(&acpi_device_lock);
+ mutex_lock(&acpi_device_lock);
list_for_each_safe(node, next, &acpi_wakeup_device_list) {
struct acpi_device *dev = container_of(node,
struct acpi_device,
/* In case user doesn't load button driver */
if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled)
continue;
- spin_unlock(&acpi_device_lock);
acpi_set_gpe_type(dev->wakeup.gpe_device,
dev->wakeup.gpe_number,
ACPI_GPE_TYPE_WAKE_RUN);
acpi_enable_gpe(dev->wakeup.gpe_device,
dev->wakeup.gpe_number);
dev->wakeup.state.enabled = 1;
- spin_lock(&acpi_device_lock);
}
- spin_unlock(&acpi_device_lock);
+ mutex_unlock(&acpi_device_lock);
return 0;
}
board_ahci_sb700 = 5, /* for SB700 and SB800 */
board_ahci_mcp65 = 6,
board_ahci_nopmp = 7,
+ board_ahci_yesncq = 8,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
/* ap->flags bits */
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ /* board_ahci_yesncq */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
- { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
- { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */
+ { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 ctl;
+ if (mesg.event & PM_EVENT_SUSPEND &&
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ return -EIO;
+ }
+
if (mesg.event & PM_EVENT_SLEEP) {
/* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
return false;
}
+static bool ahci_broken_suspend(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
+ * to the harddisk doesn't become online after
+ * resuming from STR. Warn and fail suspend.
+ */
+ {
+ .ident = "dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv4 Notebook PC"),
+ },
+ .driver_data = "F.30", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv5 Notebook PC"),
+ },
+ .driver_data = "F.16", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv6 Notebook PC"),
+ },
+ .driver_data = "F.21", /* cutoff BIOS version */
+ },
+ {
+ .ident = "HDX18",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP HDX18 Notebook PC"),
+ },
+ .driver_data = "F.23", /* cutoff BIOS version */
+ },
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ const char *ver;
+
+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
+ return false;
+
+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
+
+ return !ver || strcmp(ver, dmi->driver_data) < 0;
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
"quirky BIOS, skipping spindown on poweroff\n");
}
+ if (ahci_broken_suspend(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
* and must be dword aligned
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
+ * ICH7 errata #16 - MWDMA1 timings are incorrect
*
* Should have been BIOS fixed:
* 450NX: errata #19 - DMA hangs on old 450NX
#include <linux/dmi.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.12"
+#define DRV_VERSION "2.13"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ich_pata_33, /* ICH up to UDMA 33 only */
ich_pata_66, /* ICH up to 66 Mhz */
ich_pata_100, /* ICH up to UDMA 100 */
+ ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/
ich5_sata,
ich6_sata,
ich6m_sata,
/* ICH6 (and 6) (i915) UDMA 100 */
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ICH7/7-R (i945, i975) UDMA 100*/
- { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
+ { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
/* ICH8 Mobile PATA Controller */
{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
.port_ops = &ich_pata_ops,
},
+ [ich_pata_100_nomwdma1] =
+ {
+ .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2_ONLY,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &ich_pata_ops,
+ },
+
[ich5_sata] =
{
.flags = PIIX_SATA_FLAGS,
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
+ { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
/* end marker */
{ 0, }
};
/* PCI slot number of the controller */
.driver_data = (void *)0x1FUL,
},
+ {
+ .ident = "HP Compaq nc6000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
{ } /* terminate list */
};
*
* We follow the current spec and consider that 0x69/0x96
* identifies a port multiplier and 0x3c/0xc3 a SEMB device.
+ * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
+ * SEMB signature. This is worked around in
+ * ata_dev_read_id().
*/
if ((tf->lbam == 0) && (tf->lbah == 0)) {
DPRINTK("found ATA device by sig\n");
}
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
- printk(KERN_INFO "ata: SEMB device ignored\n");
- return ATA_DEV_SEMB_UNSUP; /* not yet */
+ DPRINTK("found SEMB device by sig (could be ATA device)\n");
+ return ATA_DEV_SEMB;
}
DPRINTK("unknown device\n");
/*
* Process compact flash extended modes
*/
- int pio = id[163] & 0x7;
- int dma = (id[163] >> 3) & 7;
+ int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
+ int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
if (pio)
pio_mask |= (1 << 5);
struct ata_taskfile tf;
unsigned int err_mask = 0;
const char *reason;
+ bool is_semb = class == ATA_DEV_SEMB;
int may_fallback = 1, tried_spinup = 0;
int rc;
ata_tf_init(dev, &tf);
switch (class) {
+ case ATA_DEV_SEMB:
+ class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
case ATA_DEV_ATA:
tf.command = ATA_CMD_ID_ATA;
break;
return -ENOENT;
}
+ if (is_semb) {
+ ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
+ "device w/ SEMB sig, disabled\n");
+ /* SEMB is not supported yet */
+ *p_class = ATA_DEV_SEMB_UNSUP;
+ return 0;
+ }
+
if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
/* Device or controller might have reported
* the wrong device class. Give a shot at the
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
- if (id[162] & 1) /* CPRM may make this media unusable */
+ /* CPRM may make this media unusable */
+ if (id[ATA_ID_CFA_KEY_MGMT] & 1)
ata_dev_printk(dev, KERN_WARNING,
"supports DRM functions and may "
"not be fully accessable.\n");
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
if (ata_class_enabled(new_class) &&
- new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+ new_class != ATA_DEV_ATA &&
+ new_class != ATA_DEV_ATAPI &&
+ new_class != ATA_DEV_SEMB) {
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
dev->class, new_class);
rc = -ENODEV;
ata_port_printk(ap, KERN_INFO, "DUMMY\n");
}
- /* perform each probe synchronously */
- DPRINTK("probe begin\n");
+ /* perform each probe asynchronously */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
async_schedule(async_port_probe, ap);
}
- DPRINTK("probe end\n");
return 0;
}
} else if (dev->class == ATA_DEV_UNKNOWN &&
ehc->tries[dev->devno] &&
ata_class_enabled(ehc->classes[dev->devno])) {
+ /* Temporarily set dev->class, it will be
+ * permanently set once all configurations are
+ * complete. This is necessary because new
+ * device configuration is done in two
+ * separate loops.
+ */
dev->class = ehc->classes[dev->devno];
if (dev->class == ATA_DEV_PMP)
else
rc = ata_dev_read_id(dev, &dev->class,
readid_flags, dev->id);
+
+ /* read_id might have changed class, store and reset */
+ ehc->classes[dev->devno] = dev->class;
+ dev->class = ATA_DEV_UNKNOWN;
+
switch (rc) {
case 0:
/* clear error info accumulated during probe */
case -ENOENT:
/* IDENTIFY was issued to non-existent
* device. No need to reset. Just
- * thaw and kill the device.
+ * thaw and ignore the device.
*/
ata_eh_thaw_port(ap);
- dev->class = ATA_DEV_UNKNOWN;
break;
default:
- dev->class = ATA_DEV_UNKNOWN;
goto err;
}
}
dev->class == ATA_DEV_PMP)
continue;
+ dev->class = ehc->classes[dev->devno];
+
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
- if (rc)
+ if (rc) {
+ dev->class = ATA_DEV_UNKNOWN;
goto err;
+ }
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
+ struct ata_link *link;
+ struct ata_device *dev;
unsigned long flags;
int rc = 0;
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ /*
+ * Error timestamps are in jiffies which doesn't run while
+ * suspended and PHY events during resume isn't too uncommon.
+ * When the two are combined, it can lead to unnecessary speed
+ * downs if the machine is suspended and resumed repeatedly.
+ * Clear error history.
+ */
+ ata_for_each_link(link, ap, HOST_FIRST)
+ ata_for_each_dev(dev, link, ALL)
+ ata_ering_clear(&dev->ering);
+
ata_acpi_set_state(ap, PMSG_ON);
if (ap->ops->port_resume)
return ap->ops->em_show(ap, buf);
return -EINVAL;
}
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
ata_scsi_em_message_show, ata_scsi_em_message_store);
EXPORT_SYMBOL_GPL(dev_attr_em_message);
}
return -EINVAL;
}
-DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
ata_scsi_activity_store);
EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
return rc;
}
+static int ata_ioc32(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_PIO_DMA)
+ return 1;
+ if (ap->pflags & ATA_PFLAG_PIO32)
+ return 1;
+ return 0;
+}
+
int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
int cmd, void __user *arg)
{
int val = -EINVAL, rc = -EINVAL;
+ unsigned long flags;
switch (cmd) {
case ATA_IOC_GET_IO32:
- val = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ val = ata_ioc32(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
if (copy_to_user(arg, &val, 1))
return -EFAULT;
return 0;
case ATA_IOC_SET_IO32:
val = (unsigned long) arg;
- if (val != 0)
- return -EINVAL;
- return 0;
+ rc = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ if (ap->pflags & ATA_PFLAG_PIO32CHANGE) {
+ if (val)
+ ap->pflags |= ATA_PFLAG_PIO32;
+ else
+ ap->pflags &= ~ATA_PFLAG_PIO32;
+ } else {
+ if (val != ata_ioc32(ap))
+ rc = -EINVAL;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ return rc;
case HDIO_GET_IDENTITY:
return ata_get_identity(ap, scsidev, arg);
static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
{
+ int form_factor = ata_id_form_factor(args->id);
+ int media_rotation_rate = ata_id_rotation_rate(args->id);
+
rbuf[1] = 0xb1;
rbuf[3] = 0x3c;
- if (ata_id_major_version(args->id) > 7) {
- rbuf[4] = args->id[217] >> 8;
- rbuf[5] = args->id[217];
- rbuf[7] = args->id[168] & 0xf;
- }
+ rbuf[4] = media_rotation_rate >> 8;
+ rbuf[5] = media_rotation_rate;
+ rbuf[7] = form_factor;
return 0;
}
*/
static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
{
- u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
+ struct ata_device *dev = args->dev;
+ u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+ u8 log_per_phys = 0;
+ u16 lowest_aligned = 0;
+ u16 word_106 = dev->id[106];
+ u16 word_209 = dev->id[209];
+
+ if ((word_106 & 0xc000) == 0x4000) {
+ /* Number and offset of logical sectors per physical sector */
+ if (word_106 & (1 << 13))
+ log_per_phys = word_106 & 0xf;
+ if ((word_209 & 0xc000) == 0x4000) {
+ u16 first = dev->id[209] & 0x3fff;
+ if (first > 0)
+ lowest_aligned = (1 << log_per_phys) - first;
+ }
+ }
VPRINTK("ENTER\n");
/* sector size */
rbuf[10] = ATA_SECT_SIZE >> 8;
rbuf[11] = ATA_SECT_SIZE & 0xff;
+
+ rbuf[12] = 0;
+ rbuf[13] = log_per_phys;
+ rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+ rbuf[15] = lowest_aligned;
}
return 0;
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
+ .port_start = ata_sff_port_start32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
+
+ if (!(ap->pflags & ATA_PFLAG_PIO32))
+ return ata_sff_data_xfer(dev, buf, buflen, rw);
/* Transfer multiple of 4 bytes */
if (rw == READ)
}
EXPORT_SYMBOL_GPL(ata_sff_port_start);
+/**
+ * ata_sff_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sff_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ if (ap->ioaddr.bmdma_addr)
+ return ata_port_start(ap);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_start32);
+
/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
};
/* Revision 0x20 added DMA */
static const struct ata_port_info info_20 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.port_ops = &ali_20_port_ops
};
/* Revision 0x20 with support logic added UDMA */
static const struct ata_port_info info_20_udma = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
};
/* Revision 0xC2 adds UDMA66 */
static const struct ata_port_info info_c2 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
};
/* Revision 0xC3 is UDMA66 for now */
static const struct ata_port_info info_c3 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
};
/* Revision 0xC4 is UDMA100 */
static const struct ata_port_info info_c4 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
};
/* Revision 0xC5 is UDMA133 with LBA48 DMA */
static const struct ata_port_info info_c5 = {
- .flags = ATA_FLAG_SLAVE_POSS,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
#include <linux/ata.h>
#define DRV_NAME "pata_efar"
-#define DRV_VERSION "0.4.4"
+#define DRV_VERSION "0.4.5"
/**
* efar_pre_reset - Enable bits
{ 2, 1 },
{ 2, 3 }, };
- if (pio > 2)
- control |= 1; /* TIME1 enable */
+ if (pio > 1)
+ control |= 1; /* TIME */
if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */
- control |= 2; /* IE enable */
- /* Intel specifies that the PPE functionality is for disk only */
+ control |= 2; /* IE */
+ /* Intel specifies that the prefetch/posting is for disk only */
if (adev->class == ATA_DEV_ATA)
- control |= 4; /* PPE enable */
+ control |= 4; /* PPE */
pci_read_config_word(dev, idetm_port, &idetm_data);
- /* Enable PPE, IE and TIME as appropriate */
-
+ /* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
idetm_data &= 0xCCF0;
idetm_data |= control;
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is enabled */
+ idetm_data |= 0x4000; /* Ensure SITRE is set */
pci_write_config_word(dev, idetm_port, idetm_data);
}
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
* TODO
* Look into engine reset on timeout errors. Should not be required.
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.11"
+#define DRV_VERSION "0.6.12"
struct hpt_clock {
u8 xfer_speed;
pci_write_config_dword(pdev, addr1, reg | mode);
}
-/**
- * hpt370_bmdma_start - DMA engine begin
- * @qc: ATA command
- *
- * The 370 and 370A want us to reset the DMA engine each time we
- * use it. The 372 and later are fine.
- */
-
-static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
- udelay(10);
- ata_bmdma_start(qc);
-}
-
/**
* hpt370_bmdma_end - DMA engine stop
* @qc: ATA command
static struct ata_port_operations hpt370_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
.mode_filter = hpt370_filter,
*
*/
+#include <linux/async.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
struct ata_port_operations *ops;
unsigned int pio_mask;
unsigned int flags;
+ unsigned int pflags;
int (*setup)(struct platform_device *, struct legacy_probe *probe,
struct legacy_data *data);
};
unsigned char *buf, unsigned int buflen, int rw)
{
int slop = buflen & 3;
+ struct ata_port *ap = dev->link->ap;
+
/* 32bit I/O capable *and* we need to write a whole number of dwords */
- if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
- struct ata_port *ap = dev->link->ap;
+ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
unsigned long flags;
local_irq_save(flags);
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
+ if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
static struct legacy_controller controllers[] = {
{"BIOS", &legacy_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"Snooping", &simple_port_ops, 0x1F,
- 0 , NULL },
+ 0, 0, NULL },
{"PDC20230", &pdc20230_port_ops, 0x7,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL },
{"HT6560A", &ht6560a_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"HT6560B", &ht6560b_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
- 0 , NULL },
+ 0, 0, NULL },
{"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
- 0 , NULL },
+ 0, 0, NULL },
{"QDI6500", &qdi6500_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, qdi_port },
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"QDI6580", &qdi6580_port_ops, 0x1F,
- 0 , qdi_port },
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
- 0 , qdi_port },
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"W83759A", &winbond_port_ops, 0x1F,
- 0 , winbond_port }
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
+ winbond_port }
};
/**
ap->ops = ops;
ap->pio_mask = pio_modes;
ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->pflags |= controller->pflags;
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
&legacy_sht);
if (ret)
goto fail;
+ async_synchronize_full();
ld->platform_dev = pdev;
/* Nothing found means we drop the port as its probably not there */
return 0;
}
}
+ ata_host_detach(host);
fail:
platform_device_unregister(pdev);
return ret;
/* No PIO or DMA methods needed for this device */
+static unsigned int netcell_read_id(struct ata_device *adev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+ /* Firmware forgets to mark words 85-87 valid */
+ if (err_mask == 0)
+ id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+ return err_mask;
+}
+
static struct scsi_host_template netcell_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations netcell_ops = {
.inherits = &ata_bmdma_port_ops,
- .cable_detect = ata_cable_80wire,
+ .cable_detect = ata_cable_80wire,
+ .read_id = netcell_read_id,
};
#include <linux/libata.h>
#define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.3"
+#define DRV_VERSION "0.1.5"
/**
.sff_dev_select = ninja32_dev_select,
.cable_detect = ata_cable_40wire,
.set_piomode = ninja32_set_piomode,
+ .sff_data_xfer = ata_sff_data_xfer32
};
static void ninja32_program(void __iomem *base)
ap->ioaddr.altstatus_addr = base + 0x1E;
ap->ioaddr.bmdma_addr = base;
ata_sff_std_ports(&ap->ioaddr);
+ ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
ninja32_program(base);
/* FIXME: Should we disable them at remove ? */
* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@lxorguk.ukuu.org.uk>
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2009 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
*
u32 len;
/* Check we keep host level locking here */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) | sel66, clock);
else
iowrite8(ioread8(clock) & ~sel66, clock);
iowrite8(ioread8(clock) & ~sel66, clock);
}
/* Flip back to 33Mhz for PIO */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
ata_bmdma_stop(qc);
pdc202xx_set_piomode(ap, adev);
#include <linux/dmi.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
{ NULL }
};
+struct via_port {
+ u8 cached_device;
+};
/*
* Cable special cases
*/
static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
- struct ata_taskfile tmp_tf;
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ struct via_port *vp = ap->private_data;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+ int newctl = 0;
+
+ if (tf->ctl != ap->last_ctl) {
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ newctl = 1;
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ iowrite8(tf->device, ioaddr->device_addr);
+ vp->cached_device = tf->device;
+ } else if (newctl)
+ iowrite8(vp->cached_device, ioaddr->device_addr);
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ WARN_ON_ONCE(!ioaddr->ctl_addr);
+ iowrite8(tf->hob_feature, ioaddr->feature_addr);
+ iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+ iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+ iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+ iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
- if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
- tmp_tf = *tf;
- tmp_tf.flags |= ATA_TFLAG_DEVICE;
- tf = &tmp_tf;
+ if (is_addr) {
+ iowrite8(tf->feature, ioaddr->feature_addr);
+ iowrite8(tf->nsect, ioaddr->nsect_addr);
+ iowrite8(tf->lbal, ioaddr->lbal_addr);
+ iowrite8(tf->lbam, ioaddr->lbam_addr);
+ iowrite8(tf->lbah, ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
}
- ata_sff_tf_load(ap, tf);
+
+ ata_wait_idle(ap);
+}
+
+static int via_port_start(struct ata_port *ap)
+{
+ struct via_port *vp;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ int ret = ata_sff_port_start(ap);
+ if (ret < 0)
+ return ret;
+
+ vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
+ if (vp == NULL)
+ return -ENOMEM;
+ ap->private_data = vp;
+ return 0;
}
static struct scsi_host_template via_sht = {
.set_dmamode = via_set_dmamode,
.prereset = via_pre_reset,
.sff_tf_load = via_tf_load,
+ .port_start = via_port_start,
};
static struct ata_port_operations via_port_ops_noirq = {
* Description information bitdefs
*/
enum {
+ CMD_DESC_RES = (1 << 11),
VENDOR_SPECIFIC_BIST = (1 << 10),
CMD_DESC_SNOOP_ENABLE = (1 << 9),
FPDMA_QUEUED_CMD = (1 << 8),
dma_addr_t sg_addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
- sg_addr, sg_len);
+ VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+ (unsigned long long)sg_addr, sg_len);
/* warn if each s/g element is not dword aligned */
if (sg_addr & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
- "s/g addr unaligned : 0x%x\n", sg_addr);
+ "s/g addr unaligned : 0x%llx\n",
+ (unsigned long long)sg_addr);
if (sg_len & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
"s/g len unaligned : 0x%x\n", sg_len);
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
struct command_desc *cd;
- u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+ u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
u32 num_prde = 0;
u32 ttl_dwords = 0;
dma_addr_t cd_paddr;
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
- SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
ata_tf_to_fis(&tf, pmp, 0, cfis);
* using ATA signature D2H register FIS to the host controller.
*/
- sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+ 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
ata_tf_to_fis(&tf, pmp, 0, cfis);
FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+ PHY_MODE9_GEN2 = 0x398,
+ PHY_MODE9_GEN1 = 0x39c,
+ PHYCFG_OFS = 0x3a0, /* only in 65n devices */
+
MV5_PHY_MODE = 0x74,
MV5_LTMODE = 0x30,
MV5_PHY_CTL = 0x0C,
static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
void __iomem *mmio);
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port);
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
.reset_bus = mv_soc_reset_bus,
};
+static const struct mv_hw_ops mv_soc_65n_ops = {
+ .phy_errata = mv_soc_65n_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
+
/*
* Functions
*/
return status;
}
+static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ /*
+ * Workaround for 88SX60x1 FEr SATA#24.
+ *
+ * Chip may corrupt WRITEs if multi_count >= 4kB.
+ * Note that READs are unaffected.
+ *
+ * It's not clear if this errata really means "4K bytes",
+ * or if it always happens for multi_count > 7
+ * regardless of device sector_size.
+ *
+ * So, for safety, any write with multi_count > 7
+ * gets converted here into a regular PIO write instead:
+ */
+ if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) {
+ if (qc->dev->multi_count > 7) {
+ switch (tf->command) {
+ case ATA_CMD_WRITE_MULTI:
+ tf->command = ATA_CMD_PIO_WRITE;
+ break;
+ case ATA_CMD_WRITE_MULTI_FUA_EXT:
+ tf->flags &= ~ATA_TFLAG_FUA; /* ugh */
+ /* fall through */
+ case ATA_CMD_WRITE_MULTI_EXT:
+ tf->command = ATA_CMD_PIO_WRITE_EXT;
+ break;
+ }
+ }
+ }
+}
+
/**
* mv_qc_prep - Host specific command preparation.
* @qc: queued command to prepare
struct ata_port *ap = qc->ap;
struct mv_port_priv *pp = ap->private_data;
__le16 *cw;
- struct ata_taskfile *tf;
+ struct ata_taskfile *tf = &qc->tf;
u16 flags = 0;
unsigned in_index;
- if ((qc->tf.protocol != ATA_PROT_DMA) &&
- (qc->tf.protocol != ATA_PROT_NCQ))
+ switch (tf->protocol) {
+ case ATA_PROT_DMA:
+ case ATA_PROT_NCQ:
+ break; /* continue below */
+ case ATA_PROT_PIO:
+ mv_rw_multi_errata_sata24(qc);
+ return;
+ default:
return;
+ }
/* Fill in command request block
*/
- if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ if (!(tf->flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
cw = &pp->crqb[in_index].ata_cmd[0];
- tf = &qc->tf;
/* Sadly, the CRQB cannot accomodate all registers--there are
* only 11 bytes...so we must pick and choose required
struct ata_port *ap = qc->ap;
struct mv_port_priv *pp = ap->private_data;
struct mv_crqb_iie *crqb;
- struct ata_taskfile *tf;
+ struct ata_taskfile *tf = &qc->tf;
unsigned in_index;
u32 flags = 0;
- if ((qc->tf.protocol != ATA_PROT_DMA) &&
- (qc->tf.protocol != ATA_PROT_NCQ))
+ if ((tf->protocol != ATA_PROT_DMA) &&
+ (tf->protocol != ATA_PROT_NCQ))
return;
/* Fill in Gen IIE command request block */
- if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ if (!(tf->flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
- tf = &qc->tf;
crqb->ata_cmd[0] = cpu_to_le32(
(tf->command << 16) |
(tf->feature << 24)
return;
}
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+ u32 reg;
+
+ reg = readl(port_mmio + PHY_MODE3);
+ reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
+ reg |= (0x1 << 27);
+ reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
+ reg |= (0x1 << 29);
+ writel(reg, port_mmio + PHY_MODE3);
+
+ reg = readl(port_mmio + PHY_MODE4);
+ reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+ reg |= (0x1 << 16);
+ writel(reg, port_mmio + PHY_MODE4);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN2);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN1);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ * soc_is_65 - check if the soc is 65 nano device
+ *
+ * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ * register, this register should contain non-zero value and it exists only
+ * in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+ void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+ if (readl(port0_mmio + PHYCFG_OFS))
+ return true;
+ return false;
+}
+
static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
{
u32 ifcfg = readl(port_mmio + SATA_IFCFG);
}
break;
case chip_soc:
- hpriv->ops = &mv_soc_ops;
+ if (soc_is_65n(hpriv))
+ hpriv->ops = &mv_soc_65n_ops;
+ else
+ hpriv->ops = &mv_soc_ops;
hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
MV_HP_ERRATA_60X1C0;
break;
n_hc = mv_get_hc_count(host->ports[0]->flags);
for (port = 0; port < host->n_ports; port++)
- hpriv->ops->read_preamp(hpriv, port, mmio);
+ if (hpriv->ops->read_preamp)
+ hpriv->ops->read_preamp(hpriv, port, mmio);
rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
if (rc)
static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
+static void pdc_freeze(struct ata_port *ap);
+static void pdc_thaw(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
/* TODO: inherit from base port_ops after converting to new EH */
static struct ata_port_operations pdc_20621_ops = {
- .sff_tf_load = pdc_tf_load_mmio,
- .sff_tf_read = ata_sff_tf_read,
- .sff_check_status = ata_sff_check_status,
- .sff_exec_command = pdc_exec_command_mmio,
- .sff_dev_select = ata_sff_dev_select,
- .phy_reset = pdc_20621_phy_reset,
+ .inherits = &ata_sff_port_ops,
+
+ .check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc20621_qc_prep,
.qc_issue = pdc20621_qc_issue,
- .qc_fill_rtf = ata_sff_qc_fill_rtf,
- .sff_data_xfer = ata_sff_data_xfer,
- .eng_timeout = pdc_eng_timeout,
- .sff_irq_clear = pdc20621_irq_clear,
- .sff_irq_on = ata_sff_irq_on,
+
+ .freeze = pdc_freeze,
+ .thaw = pdc_thaw,
+ .softreset = pdc_softreset,
+ .error_handler = pdc_error_handler,
+ .lost_interrupt = ATA_OP_NULL,
+ .post_internal_cmd = pdc_post_internal_cmd,
+
.port_start = pdc_port_start,
+
+ .sff_tf_load = pdc_tf_load_mmio,
+ .sff_exec_command = pdc_exec_command_mmio,
+ .sff_irq_clear = pdc20621_irq_clear,
};
static const struct ata_port_info pdc_port_info[] = {
return 0;
}
-static void pdc_20621_phy_reset(struct ata_port *ap)
-{
- VPRINTK("ENTER\n");
- ap->cbl = ATA_CBL_SATA;
- ata_port_probe(ap);
- ata_bus_reset(ap);
-}
-
static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
unsigned int portno,
unsigned int total_len)
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
- case ATA_PROT_DMA:
case ATA_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ break;
+ /*FALLTHROUGH*/
+ case ATA_PROT_DMA:
pdc20621_packet_start(qc);
return 0;
static void pdc20621_irq_clear(struct ata_port *ap)
{
- struct ata_host *host = ap->host;
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
-
- mmio += PDC_CHIP0_OFS;
-
- readl(mmio + PDC_20621_SEQMASK);
+ ioread8(ap->ioaddr.status_addr);
}
static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
-static void pdc_eng_timeout(struct ata_port *ap)
+static void pdc_freeze(struct ata_port *ap)
{
- u8 drv_stat;
- struct ata_host *host = ap->host;
- struct ata_queued_cmd *qc;
- unsigned long flags;
+ void __iomem *mmio = ap->ioaddr.cmd_addr;
+ u32 tmp;
- DPRINTK("ENTER\n");
+ /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
- spin_lock_irqsave(&host->lock, flags);
+ tmp = readl(mmio + PDC_CTLSTAT);
+ tmp |= PDC_MASK_INT;
+ tmp &= ~PDC_DMA_ENABLE;
+ writel(tmp, mmio + PDC_CTLSTAT);
+ readl(mmio + PDC_CTLSTAT); /* flush */
+}
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
+static void pdc_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.cmd_addr;
+ u32 tmp;
- switch (qc->tf.protocol) {
- case ATA_PROT_DMA:
- case ATA_PROT_NODATA:
- ata_port_printk(ap, KERN_ERR, "command timeout\n");
- qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
- break;
+ /* FIXME: start HDMA engine, if zero ATA engines running */
- default:
- drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ /* clear IRQ */
+ ioread8(ap->ioaddr.status_addr);
- ata_port_printk(ap, KERN_ERR,
- "unknown timeout, cmd 0x%x stat 0x%x\n",
- qc->tf.command, drv_stat);
+ /* turn IRQ back on */
+ tmp = readl(mmio + PDC_CTLSTAT);
+ tmp &= ~PDC_MASK_INT;
+ writel(tmp, mmio + PDC_CTLSTAT);
+ readl(mmio + PDC_CTLSTAT); /* flush */
+}
- qc->err_mask |= ac_err_mask(drv_stat);
- break;
+static void pdc_reset_port(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+ unsigned int i;
+ u32 tmp;
+
+ /* FIXME: handle HDMA copy engine */
+
+ for (i = 11; i > 0; i--) {
+ tmp = readl(mmio);
+ if (tmp & PDC_RESET)
+ break;
+
+ udelay(100);
+
+ tmp |= PDC_RESET;
+ writel(tmp, mmio);
}
- spin_unlock_irqrestore(&host->lock, flags);
- ata_eh_qc_complete(qc);
- DPRINTK("EXIT\n");
+ tmp &= ~PDC_RESET;
+ writel(tmp, mmio);
+ readl(mmio); /* flush */
+}
+
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ pdc_reset_port(link->ap);
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static void pdc_error_handler(struct ata_port *ap)
+{
+ if (!(ap->pflags & ATA_PFLAG_FROZEN))
+ pdc_reset_port(ap);
+
+ ata_std_error_handler(ap);
+}
+
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ pdc_reset_port(ap);
+}
+
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ u8 *scsicmd = qc->scsicmd->cmnd;
+ int pio = 1; /* atapi dma off by default */
+
+ /* Whitelist commands that may use DMA. */
+ switch (scsicmd[0]) {
+ case WRITE_12:
+ case WRITE_10:
+ case WRITE_6:
+ case READ_12:
+ case READ_10:
+ case READ_6:
+ case 0xad: /* READ_DVD_STRUCTURE */
+ case 0xbe: /* READ_CD */
+ pio = 0;
+ }
+ /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+ if (scsicmd[0] == WRITE_10) {
+ unsigned int lba =
+ (scsicmd[2] << 24) |
+ (scsicmd[3] << 16) |
+ (scsicmd[4] << 8) |
+ scsicmd[5];
+ if (lba >= 0xFFFF4FA2)
+ pio = 1;
+ }
+ return pio;
}
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ tf->protocol == ATAPI_PROT_DMA);
ata_sff_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ tf->protocol == ATAPI_PROT_DMA);
ata_sff_exec_command(ap, tf);
}
static int printed_version;
unsigned int i;
int rc;
- struct ata_host *host;
+ struct ata_host *host = NULL;
int board_id = (int) ent->driver_data;
const unsigned *bar_sizes;
goto out;
}
- err = pci_set_dma_mask(dev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
if (err) {
dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
goto out;
static inline int driver_match_device(struct device_driver *drv,
struct device *dev)
{
- return drv->bus->match && drv->bus->match(dev, drv);
+ return drv->bus->match ? drv->bus->match(dev, drv) : 1;
}
extern void sysdev_shutdown(void);
}
kobject_uevent(&priv->kobj, KOBJ_ADD);
- return error;
+ return 0;
out_unregister:
+ kfree(drv->p);
+ drv->p = NULL;
kobject_put(&priv->kobj);
out_put_bus:
bus_put(bus);
}
if (!dev_name(dev))
- goto done;
+ goto name_error;
pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
set_dev_node(dev, dev_to_node(parent));
/* first, register with generic layer. */
- error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
+ /* we require the name to be set before, and pass NULL */
+ error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
if (error)
goto Error;
cleanup_device_parent(dev);
if (parent)
put_device(parent);
+name_error:
+ kfree(dev->p);
+ dev->p = NULL;
goto done;
}
struct device *child;
int error = 0;
+ if (!parent->p)
+ return 0;
+
klist_iter_init(&parent->p->klist_children, &i);
while ((child = next_device(&i)) && !error)
error = fn(child, data);
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
}
+EXPORT_SYMBOL_GPL(wait_for_device_probe);
/**
* driver_probe_device - attempt to bind device & driver together
*/
void driver_unregister(struct device_driver *drv)
{
+ if (!drv || !drv->p) {
+ WARN(1, "Unexpected driver unregister!\n");
+ return;
+ }
driver_remove_groups(drv, drv->groups);
bus_remove_driver(drv);
}
#include <linux/bug.h>
#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/iommu.h>
if (d) {
memcpy(d, data, size);
pdev->dev.platform_data = d;
- pdev->platform_data = d;
}
return d ? 0 : -ENOMEM;
}
else
dev_set_name(&pdev->dev, pdev->name);
- /* We will remove platform_data field from struct device
- * if all platform devices pass its platform specific data
- * from platform_device. The conversion is going to be a
- * long time, so we allow the two cases coexist to make
- * this kind of fix more easily*/
- if (pdev->platform_data && pdev->dev.platform_data) {
- printk(KERN_ERR
- "%s: use which platform_data?\n",
- dev_name(&pdev->dev));
- } else if (pdev->platform_data) {
- pdev->dev.platform_data = pdev->platform_data;
- } else if (pdev->dev.platform_data) {
- pdev->platform_data = pdev->dev.platform_data;
- }
-
for (i = 0; i < pdev->num_resources; i++) {
struct resource *p, *r = &pdev->resource[i];
{
int error;
+ early_platform_cleanup();
+
error = device_register(&platform_bus);
if (error)
return error;
}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
#endif
+
+static __initdata LIST_HEAD(early_platform_driver_list);
+static __initdata LIST_HEAD(early_platform_device_list);
+
+/**
+ * early_platform_driver_register
+ * @epdrv: early_platform driver structure
+ * @buf: string passed from early_param()
+ */
+int __init early_platform_driver_register(struct early_platform_driver *epdrv,
+ char *buf)
+{
+ unsigned long index;
+ int n;
+
+ /* Simply add the driver to the end of the global list.
+ * Drivers will by default be put on the list in compiled-in order.
+ */
+ if (!epdrv->list.next) {
+ INIT_LIST_HEAD(&epdrv->list);
+ list_add_tail(&epdrv->list, &early_platform_driver_list);
+ }
+
+ /* If the user has specified device then make sure the driver
+ * gets prioritized. The driver of the last device specified on
+ * command line will be put first on the list.
+ */
+ n = strlen(epdrv->pdrv->driver.name);
+ if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
+ list_move(&epdrv->list, &early_platform_driver_list);
+
+ if (!strcmp(buf, epdrv->pdrv->driver.name))
+ epdrv->requested_id = -1;
+ else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10,
+ &index) == 0)
+ epdrv->requested_id = index;
+ else
+ epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
+ }
+
+ return 0;
+}
+
+/**
+ * early_platform_add_devices - add a numbers of early platform devices
+ * @devs: array of early platform devices to add
+ * @num: number of early platform devices in array
+ */
+void __init early_platform_add_devices(struct platform_device **devs, int num)
+{
+ struct device *dev;
+ int i;
+
+ /* simply add the devices to list */
+ for (i = 0; i < num; i++) {
+ dev = &devs[i]->dev;
+
+ if (!dev->devres_head.next) {
+ INIT_LIST_HEAD(&dev->devres_head);
+ list_add_tail(&dev->devres_head,
+ &early_platform_device_list);
+ }
+ }
+}
+
+/**
+ * early_platform_driver_register_all
+ * @class_str: string to identify early platform driver class
+ */
+void __init early_platform_driver_register_all(char *class_str)
+{
+ /* The "class_str" parameter may or may not be present on the kernel
+ * command line. If it is present then there may be more than one
+ * matching parameter.
+ *
+ * Since we register our early platform drivers using early_param()
+ * we need to make sure that they also get registered in the case
+ * when the parameter is missing from the kernel command line.
+ *
+ * We use parse_early_options() to make sure the early_param() gets
+ * called at least once. The early_param() may be called more than
+ * once since the name of the preferred device may be specified on
+ * the kernel command line. early_platform_driver_register() handles
+ * this case for us.
+ */
+ parse_early_options(class_str);
+}
+
+/**
+ * early_platform_match
+ * @epdrv: early platform driver structure
+ * @id: id to match against
+ */
+static __init struct platform_device *
+early_platform_match(struct early_platform_driver *epdrv, int id)
+{
+ struct platform_device *pd;
+
+ list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+ if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+ if (pd->id == id)
+ return pd;
+
+ return NULL;
+}
+
+/**
+ * early_platform_left
+ * @epdrv: early platform driver structure
+ * @id: return true if id or above exists
+ */
+static __init int early_platform_left(struct early_platform_driver *epdrv,
+ int id)
+{
+ struct platform_device *pd;
+
+ list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+ if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+ if (pd->id >= id)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * early_platform_driver_probe_id
+ * @class_str: string to identify early platform driver class
+ * @id: id to match against
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ */
+static int __init early_platform_driver_probe_id(char *class_str,
+ int id,
+ int nr_probe)
+{
+ struct early_platform_driver *epdrv;
+ struct platform_device *match;
+ int match_id;
+ int n = 0;
+ int left = 0;
+
+ list_for_each_entry(epdrv, &early_platform_driver_list, list) {
+ /* only use drivers matching our class_str */
+ if (strcmp(class_str, epdrv->class_str))
+ continue;
+
+ if (id == -2) {
+ match_id = epdrv->requested_id;
+ left = 1;
+
+ } else {
+ match_id = id;
+ left += early_platform_left(epdrv, id);
+
+ /* skip requested id */
+ switch (epdrv->requested_id) {
+ case EARLY_PLATFORM_ID_ERROR:
+ case EARLY_PLATFORM_ID_UNSET:
+ break;
+ default:
+ if (epdrv->requested_id == id)
+ match_id = EARLY_PLATFORM_ID_UNSET;
+ }
+ }
+
+ switch (match_id) {
+ case EARLY_PLATFORM_ID_ERROR:
+ pr_warning("%s: unable to parse %s parameter\n",
+ class_str, epdrv->pdrv->driver.name);
+ /* fall-through */
+ case EARLY_PLATFORM_ID_UNSET:
+ match = NULL;
+ break;
+ default:
+ match = early_platform_match(epdrv, match_id);
+ }
+
+ if (match) {
+ if (epdrv->pdrv->probe(match))
+ pr_warning("%s: unable to probe %s early.\n",
+ class_str, match->name);
+ else
+ n++;
+ }
+
+ if (n >= nr_probe)
+ break;
+ }
+
+ if (left)
+ return n;
+ else
+ return -ENODEV;
+}
+
+/**
+ * early_platform_driver_probe
+ * @class_str: string to identify early platform driver class
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ * @user_only: only probe user specified early platform devices
+ */
+int __init early_platform_driver_probe(char *class_str,
+ int nr_probe,
+ int user_only)
+{
+ int k, n, i;
+
+ n = 0;
+ for (i = -2; n < nr_probe; i++) {
+ k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
+
+ if (k < 0)
+ break;
+
+ n += k;
+
+ if (user_only)
+ break;
+ }
+
+ return n;
+}
+
+/**
+ * early_platform_cleanup - clean up early platform code
+ */
+void __init early_platform_cleanup(void)
+{
+ struct platform_device *pd, *pd2;
+
+ /* clean up the devres list used to chain devices */
+ list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
+ dev.devres_head) {
+ list_del(&pd->dev.devres_head);
+ memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
+ }
+}
+
{
struct device *dev;
+ mutex_lock(&dpm_list_mtx);
list_for_each_entry(dev, &dpm_list, power.entry)
if (dev->power.status > DPM_OFF) {
int error;
if (error)
pm_dev_err(dev, state, " early", error);
}
+ mutex_unlock(&dpm_list_mtx);
}
/**
int error = 0;
suspend_device_irqs();
+ mutex_lock(&dpm_list_mtx);
list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
error = suspend_device_noirq(dev, state);
if (error) {
}
dev->power.status = DPM_OFF_IRQ;
}
+ mutex_unlock(&dpm_list_mtx);
if (error)
device_power_up(resume_event(state));
return error;
if (rw == READ) {
copy_from_brd(mem + off, brd, sector, len);
flush_dcache_page(page);
- } else
+ } else {
+ flush_dcache_page(page);
copy_to_brd(brd, mem + off, sector, len);
+ }
kunmap_atomic(mem, KM_USER0);
out:
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
+ blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
blk_queue_max_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
/* The Inbound Post Queue only accepts 32-bit physical addresses for the
CCISS commands, so they must be allocated from the lower 4GiB of
memory. */
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
iounmap(vaddr);
return -ENOMEM;
if (i > 0) {
SET_HANDLER(&write_intr);
outsw(HD_DATA, req->buffer, 256);
- local_irq_enable();
} else {
#if (HD_DELAY > 0)
last_req = read_timer();
if (!CURRENT)
return;
- disable_irq(HD_IRQ);
- local_irq_enable();
+ spin_lock_irq(hd_queue->queue_lock);
reset = 1;
name = CURRENT->rq_disk->disk_name;
printk("%s: timeout\n", name);
#endif
end_request(CURRENT, 0);
}
- local_irq_disable();
hd_request();
- enable_irq(HD_IRQ);
+ spin_unlock_irq(hd_queue->queue_lock);
}
static int do_special_op(struct hd_i_struct *disk, struct request *req)
return;
repeat:
del_timer(&device_timer);
- local_irq_enable();
req = CURRENT;
if (!req) {
}
if (reset) {
- local_irq_disable();
reset_hd();
return;
}
static void do_hd_request(struct request_queue *q)
{
- disable_irq(HD_IRQ);
hd_request();
- enable_irq(HD_IRQ);
}
static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
void (*handler)(void) = do_hd;
+ spin_lock(hd_queue->queue_lock);
+
do_hd = NULL;
del_timer(&device_timer);
if (!handler)
handler = unexpected_hd_interrupt;
handler();
- local_irq_enable();
+
+ spin_unlock(hd_queue->queue_lock);
+
return IRQ_HANDLED;
}
if (host->breq) {
req = elv_next_request(host->breq);
if (req)
- printk(", sector=%ld", req->sector);
+ printk(", sector=%u", (u32)req->sector);
}
}
struct mg_host *host = dev_id;
void (*handler)(struct mg_host *) = host->mg_do_intr;
- host->mg_do_intr = 0;
+ spin_lock(&host->lock);
+
+ host->mg_do_intr = NULL;
del_timer(&host->timer);
if (!handler)
handler = mg_unexpected_intr;
handler(host);
+
+ spin_unlock(&host->lock);
+
return IRQ_HANDLED;
}
remains = req->nr_sectors;
- if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, 0) !=
+ if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) !=
MG_ERR_NONE)
mg_bad_rw_intr(host);
remains = req->nr_sectors;
- if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, 0) !=
+ if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) !=
MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
char *name;
struct request *req;
+ spin_lock_irq(&host->lock);
+
req = elv_next_request(host->breq);
if (!req)
- return;
+ goto out_unlock;
host->mg_do_intr = NULL;
mg_bad_rw_intr(host);
mg_request(host->breq);
+out_unlock:
+ spin_unlock_irq(&host->lock);
}
static void mg_request_poll(struct request_queue *q)
{
struct urb *urb = &sc->work_urb;
struct bulk_cs_wrap *bcs;
+ int endp;
int len;
int rc;
return;
}
+ endp = usb_pipeendpoint(sc->last_pipe);
+ if (usb_pipein(sc->last_pipe))
+ endp |= USB_DIR_IN;
+
if (cmd->state == UB_CMDST_CLEAR) {
if (urb->status == -EPIPE) {
/*
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_sense(sc, cmd);
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat(sc, cmd);
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat_counted(sc, cmd);
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
return 0;
}
goto failed_alloc;
blk_queue_make_request(card->queue, mm_make_request);
+ card->queue->queue_lock = &card->lock;
card->queue->queuedata = card;
card->queue->unplug_fn = mm_unplug_device;
spin_lock_irqsave(&blkif_io_lock, flags);
- del_gendisk(info->gd);
-
/* No more blkif_request(). */
blk_stop_queue(info->rq);
blk_cleanup_queue(info->rq);
info->rq = NULL;
+ del_gendisk(info->gd);
+
out:
xenbus_frontend_closed(dev);
}
break;
case XenbusStateClosing:
- if (info->gd == NULL)
- xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
+ if (info->gd == NULL) {
+ xenbus_frontend_closed(dev);
+ break;
+ }
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
case ACE_FSM_STATE_IDENTIFY_PREPARE:
/* Send identify command */
ace->fsm_task = ACE_TASK_IDENTIFY;
- ace->data_ptr = &ace->cf_id;
+ ace->data_ptr = ace->cf_id;
ace->data_count = ACE_BUF_PER_SECTOR;
ace_out(ace, ACE_SECCNTCMD, ACE_SECCNTCMD_IDENTIFY);
break;
case ACE_FSM_STATE_IDENTIFY_COMPLETE:
- ace_fix_driveid(&ace->cf_id[0]);
- ace_dump_mem(&ace->cf_id, 512); /* Debug: Dump out disk ID */
+ ace_fix_driveid(ace->cf_id);
+ ace_dump_mem(ace->cf_id, 512); /* Debug: Dump out disk ID */
if (ace->data_result) {
/* Error occured, disable the disk */
/* Record disk parameters */
set_capacity(ace->gd,
- ata_id_u32(&ace->cf_id, ATA_ID_LBA_CAPACITY));
+ ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
dev_info(ace->dev, "capacity: %i sectors\n",
- ata_id_u32(&ace->cf_id, ATA_ID_LBA_CAPACITY));
+ ata_id_u32(ace->cf_id, ATA_ID_LBA_CAPACITY));
}
/* We're done, drop to IDLE state and notify waiters */
static int ace_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct ace_device *ace = bdev->bd_disk->private_data;
- u16 *cf_id = &ace->cf_id[0];
+ u16 *cf_id = ace->cf_id;
dev_dbg(ace->dev, "ace_getgeo()\n");
struct device_node *node = vdev->dev.archdata.of_node;
deviceno = vdev->unit_address;
- if (deviceno > VIOCD_MAX_CD)
+ if (deviceno >= VIOCD_MAX_CD)
return -ENODEV;
if (!node)
return -ENODEV;
int i, ret = -ENOMEM;
for (i = 0; i < num_pages; i++) {
- page = alloc_page(GFP_KERNEL | GFP_DMA32);
+ page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
/* agp_free_memory() needs gart address */
if (page == NULL)
goto out;
{
struct page * page;
- page = alloc_page(GFP_KERNEL | GFP_DMA32);
+ page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
if (page == NULL)
return NULL;
{ PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M",
&intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL },
+ { PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854",
+ &intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL },
{ PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM",
&intel_845_driver, &intel_830_driver },
ID(PCI_DEVICE_ID_INTEL_82845_HB),
ID(PCI_DEVICE_ID_INTEL_82845G_HB),
ID(PCI_DEVICE_ID_INTEL_82850_HB),
+ ID(PCI_DEVICE_ID_INTEL_82854_HB),
ID(PCI_DEVICE_ID_INTEL_82855PM_HB),
ID(PCI_DEVICE_ID_INTEL_82855GM_HB),
ID(PCI_DEVICE_ID_INTEL_82860_HB),
#ifdef CONFIG_IA64
static void __iomem *hpet_mctr;
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)read_counter((void __iomem *)hpet_mctr);
}
break;
}
- gsi = acpi_register_gsi(irq, ACPI_LEVEL_SENSITIVE,
+ gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
if (gsi > 0)
break;
irqp = &res->data.extended_irq;
for (i = 0; i < irqp->interrupt_count; i++) {
- irq = acpi_register_gsi(irqp->interrupts[i],
+ irq = acpi_register_gsi(NULL, irqp->interrupts[i],
irqp->triggering, irqp->polarity);
if (irq < 0)
return AE_ERROR;
{
int len;
- /* We never get spurious callbacks. */
+ /* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
if (!vq->vq_ops->get_buf(vq, &len))
- BUG();
+ return;
data_left = len / sizeof(random_data[0]);
complete(&have_data);
/* Events that were received with the proper format. */
IPMI_STAT_events,
+ /* Retransmissions on IPMB that failed. */
+ IPMI_STAT_dropped_rexmit_ipmb_commands,
+
+ /* Retransmissions on LAN that failed. */
+ IPMI_STAT_dropped_rexmit_lan_commands,
/* This *must* remain last, add new values above this. */
IPMI_NUM_STATS
#define ipmi_get_stat(intf, stat) \
((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat]))
+static int is_lan_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_LAN_ADDR_TYPE;
+}
+
+static int is_ipmb_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_IPMB_ADDR_TYPE;
+}
+
+static int is_ipmb_bcast_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE;
+}
static void free_recv_msg_list(struct list_head *q)
{
return (smi_addr1->lun == smi_addr2->lun);
}
- if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) {
struct ipmi_ipmb_addr *ipmb_addr1
= (struct ipmi_ipmb_addr *) addr1;
struct ipmi_ipmb_addr *ipmb_addr2
&& (ipmb_addr1->lun == ipmb_addr2->lun));
}
- if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
+ if (is_lan_addr(addr1)) {
struct ipmi_lan_addr *lan_addr1
= (struct ipmi_lan_addr *) addr1;
struct ipmi_lan_addr *lan_addr2
|| (addr->channel < 0))
return -EINVAL;
- if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
if (len < sizeof(struct ipmi_ipmb_addr))
return -EINVAL;
return 0;
}
- if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+ if (is_lan_addr(addr)) {
if (len < sizeof(struct ipmi_lan_addr))
return -EINVAL;
return 0;
memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
smi_msg->data_size = msg->data_len + 2;
ipmi_inc_stat(intf, sent_local_commands);
- } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ } else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
struct ipmi_ipmb_addr *ipmb_addr;
unsigned char ipmb_seq;
long seqid;
spin_lock_irqsave(&(intf->seq_lock), flags);
- ipmi_inc_stat(intf, sent_ipmb_commands);
-
/*
* Create a sequence number with a 1 second
* timeout and 4 retries.
goto out_err;
}
+ ipmi_inc_stat(intf, sent_ipmb_commands);
+
/*
* Store the sequence number in the message,
* so that when the send message response
*/
spin_unlock_irqrestore(&(intf->seq_lock), flags);
}
- } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+ } else if (is_lan_addr(addr)) {
struct ipmi_lan_addr *lan_addr;
unsigned char ipmb_seq;
long seqid;
spin_lock_irqsave(&(intf->seq_lock), flags);
- ipmi_inc_stat(intf, sent_lan_commands);
-
/*
* Create a sequence number with a 1 second
* timeout and 4 retries.
goto out_err;
}
+ ipmi_inc_stat(intf, sent_lan_commands);
+
/*
* Store the sequence number in the message,
* so that when the send message response
ipmi_get_stat(intf, invalid_events));
out += sprintf(out, "events: %u\n",
ipmi_get_stat(intf, events));
+ out += sprintf(out, "failed rexmit LAN msgs: %u\n",
+ ipmi_get_stat(intf, dropped_rexmit_lan_commands));
+ out += sprintf(out, "failed rexmit IPMB msgs: %u\n",
+ ipmi_get_stat(intf, dropped_rexmit_ipmb_commands));
return (out - ((char *) page));
}
/* Assume a single IPMB channel at zero. */
intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB;
intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB;
+ intf->curr_channel = IPMI_MAX_CHANNELS;
}
if (rv == 0)
return rv;
}
+/*
+ * This routine will handle "Get Message" command responses with
+ * channels that use an OEM Medium. The message format belongs to
+ * the OEM. See IPMI 2.0 specification, Chapter 6 and
+ * Chapter 22, sections 22.6 and 22.24 for more details.
+ */
+static int handle_oem_get_msg_cmd(ipmi_smi_t intf,
+ struct ipmi_smi_msg *msg)
+{
+ struct cmd_rcvr *rcvr;
+ int rv = 0;
+ unsigned char netfn;
+ unsigned char cmd;
+ unsigned char chan;
+ ipmi_user_t user = NULL;
+ struct ipmi_system_interface_addr *smi_addr;
+ struct ipmi_recv_msg *recv_msg;
+
+ /*
+ * We expect the OEM SW to perform error checking
+ * so we just do some basic sanity checks
+ */
+ if (msg->rsp_size < 4) {
+ /* Message not big enough, just ignore it. */
+ ipmi_inc_stat(intf, invalid_commands);
+ return 0;
+ }
+
+ if (msg->rsp[2] != 0) {
+ /* An error getting the response, just ignore it. */
+ return 0;
+ }
+
+ /*
+ * This is an OEM Message so the OEM needs to know how
+ * handle the message. We do no interpretation.
+ */
+ netfn = msg->rsp[0] >> 2;
+ cmd = msg->rsp[1];
+ chan = msg->rsp[3] & 0xf;
+
+ rcu_read_lock();
+ rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
+ if (rcvr) {
+ user = rcvr->user;
+ kref_get(&user->refcount);
+ } else
+ user = NULL;
+ rcu_read_unlock();
+
+ if (user == NULL) {
+ /* We didn't find a user, just give up. */
+ ipmi_inc_stat(intf, unhandled_commands);
+
+ /*
+ * Don't do anything with these messages, just allow
+ * them to be freed.
+ */
+
+ rv = 0;
+ } else {
+ /* Deliver the message to the user. */
+ ipmi_inc_stat(intf, handled_commands);
+
+ recv_msg = ipmi_alloc_recv_msg();
+ if (!recv_msg) {
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
+ rv = 1;
+ kref_put(&user->refcount, free_user);
+ } else {
+ /*
+ * OEM Messages are expected to be delivered via
+ * the system interface to SMS software. We might
+ * need to visit this again depending on OEM
+ * requirements
+ */
+ smi_addr = ((struct ipmi_system_interface_addr *)
+ &(recv_msg->addr));
+ smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr->channel = IPMI_BMC_CHANNEL;
+ smi_addr->lun = msg->rsp[0] & 3;
+
+ recv_msg->user = user;
+ recv_msg->user_msg_data = NULL;
+ recv_msg->recv_type = IPMI_OEM_RECV_TYPE;
+ recv_msg->msg.netfn = msg->rsp[0] >> 2;
+ recv_msg->msg.cmd = msg->rsp[1];
+ recv_msg->msg.data = recv_msg->msg_data;
+
+ /*
+ * The message starts at byte 4 which follows the
+ * the Channel Byte in the "GET MESSAGE" command
+ */
+ recv_msg->msg.data_len = msg->rsp_size - 4;
+ memcpy(recv_msg->msg_data,
+ &(msg->rsp[4]),
+ msg->rsp_size - 4);
+ deliver_response(recv_msg);
+ }
+ }
+
+ return rv;
+}
+
static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
struct ipmi_smi_msg *msg)
{
goto out;
}
+ /*
+ * We need to make sure the channels have been initialized.
+ * The channel_handler routine will set the "curr_channel"
+ * equal to or greater than IPMI_MAX_CHANNELS when all the
+ * channels for this interface have been initialized.
+ */
+ if (intf->curr_channel < IPMI_MAX_CHANNELS) {
+ requeue = 0; /* Throw the message away */
+ goto out;
+ }
+
switch (intf->channels[chan].medium) {
case IPMI_CHANNEL_MEDIUM_IPMB:
if (msg->rsp[4] & 0x04) {
break;
default:
- /*
- * We don't handle the channel type, so just
- * free the message.
- */
- requeue = 0;
+ /* Check for OEM Channels. Clients had better
+ register for these commands. */
+ if ((intf->channels[chan].medium
+ >= IPMI_CHANNEL_MEDIUM_OEM_MIN)
+ && (intf->channels[chan].medium
+ <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) {
+ requeue = handle_oem_get_msg_cmd(intf, msg);
+ } else {
+ /*
+ * We don't handle the channel type, so just
+ * free the message.
+ */
+ requeue = 0;
+ }
}
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
list_add_tail(&msg->link, timeouts);
if (ent->broadcast)
ipmi_inc_stat(intf, timed_out_ipmb_broadcasts);
- else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
+ else if (is_lan_addr(&ent->recv_msg->addr))
ipmi_inc_stat(intf, timed_out_lan_commands);
else
ipmi_inc_stat(intf, timed_out_ipmb_commands);
*/
ent->timeout = MAX_MSG_TIMEOUT;
ent->retries_left--;
- if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
- ipmi_inc_stat(intf, retransmitted_lan_commands);
- else
- ipmi_inc_stat(intf, retransmitted_ipmb_commands);
-
smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
ent->seqid);
- if (!smi_msg)
+ if (!smi_msg) {
+ if (is_lan_addr(&ent->recv_msg->addr))
+ ipmi_inc_stat(intf,
+ dropped_rexmit_lan_commands);
+ else
+ ipmi_inc_stat(intf,
+ dropped_rexmit_ipmb_commands);
return;
+ }
spin_unlock_irqrestore(&intf->seq_lock, *flags);
* resent.
*/
handlers = intf->handlers;
- if (handlers)
+ if (handlers) {
+ if (is_lan_addr(&ent->recv_msg->addr))
+ ipmi_inc_stat(intf,
+ retransmitted_lan_commands);
+ else
+ ipmi_inc_stat(intf,
+ retransmitted_ipmb_commands);
+
intf->handlers->sender(intf->send_info,
smi_msg, 0);
- else
+ } else
ipmi_free_smi_msg(smi_msg);
spin_lock_irqsave(&intf->seq_lock, *flags);
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
short timeout */
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR 0x01
-#define IPMI_BMC_EVT_MSG_INTR 0x02
-#define IPMI_BMC_EVT_MSG_BUFF 0x04
-#define IPMI_BMC_SYS_LOG 0x08
-
enum si_intf_state {
SI_NORMAL,
SI_GETTING_FLAGS,
OEM2_DATA_AVAIL)
unsigned char msg_flags;
+ /* Does the BMC have an event buffer? */
+ char has_event_buffer;
+
/*
* If set to true, this will request events the next time the
* state machine is idle.
{
struct smi_info *smi_info = send_info;
- if (atomic_read(&smi_info->stop_operation))
+ if (atomic_read(&smi_info->stop_operation) ||
+ !smi_info->has_event_buffer)
return;
atomic_set(&smi_info->req_events, 1);
};
#endif /* CONFIG_PPC_OF */
-
-static int try_get_dev_id(struct smi_info *smi_info)
+static int wait_for_msg_done(struct smi_info *smi_info)
{
- unsigned char msg[2];
- unsigned char *resp;
- unsigned long resp_len;
enum si_sm_result smi_result;
- int rv = 0;
-
- resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
- if (!resp)
- return -ENOMEM;
-
- /*
- * Do a Get Device ID command, since it comes back with some
- * useful info.
- */
- msg[0] = IPMI_NETFN_APP_REQUEST << 2;
- msg[1] = IPMI_GET_DEVICE_ID_CMD;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
for (;;) {
} else
break;
}
- if (smi_result == SI_SM_HOSED) {
+ if (smi_result == SI_SM_HOSED)
/*
* We couldn't get the state machine to run, so whatever's at
* the port is probably not an IPMI SMI interface.
*/
- rv = -ENODEV;
+ return -ENODEV;
+
+ return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ /*
+ * Do a Get Device ID command, since it comes back with some
+ * useful info.
+ */
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_DEVICE_ID_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv)
goto out;
- }
- /* Otherwise, we got some data. */
resp_len = smi_info->handlers->get_result(smi_info->si_sm,
resp, IPMI_MAX_MSG_LENGTH);
return rv;
}
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from get global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global"
+ " enables command, cannot enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+ /* buffer is already enabled, nothing to do. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from set global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global,"
+ "enables command, not enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[2] != 0)
+ /*
+ * An error when setting the event buffer bit means
+ * that the event buffer is not supported.
+ */
+ rv = -ENOENT;
+ out:
+ kfree(resp);
+ return rv;
+}
+
static int type_file_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
new_smi->intf_num = smi_num;
smi_num++;
+ rv = try_enable_event_buffer(new_smi);
+ if (rv == 0)
+ new_smi->has_event_buffer = 1;
+
/*
* Start clearing the flags before we enable interrupts or the
* timer to avoid racing with the timer.
*/
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
- if (rv) {
+ if (!new_smi->pdev) {
printk(KERN_ERR
"ipmi_si_intf:"
" Unable to allocate platform device\n");
}
#endif
-void __attribute__((weak))
-map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
- /* nothing. architectures can override. */
-}
-
-void __attribute__((weak))
-unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
- /* nothing. architectures can override. */
-}
-
-static void mmap_mem_open(struct vm_area_struct *vma)
-{
- map_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
-static void mmap_mem_close(struct vm_area_struct *vma)
-{
- unmap_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
static struct vm_operations_struct mmap_mem_ops = {
- .open = mmap_mem_open,
- .close = mmap_mem_close,
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys
#endif
vma->vm_pgoff,
size,
vma->vm_page_prot)) {
- unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
return -EAGAIN;
}
return 0;
written += chunk - unwritten;
if (unwritten)
break;
+ if (signal_pending(current))
+ return written ? written : -ERESTARTSYS;
buf += chunk;
count -= chunk;
cond_resched();
continue;
brd = &mxser_boards[m];
- retval = mxser_get_ISA_conf(!ioaddr[b], brd);
+ retval = mxser_get_ISA_conf(ioaddr[b], brd);
if (retval <= 0) {
brd->info = NULL;
continue;
* value is not cryptographically secure but for several uses the cost of
* depleting entropy is too high
*/
+DEFINE_PER_CPU(__u32 [4], get_random_int_hash);
unsigned int get_random_int(void)
{
- /*
- * Use IP's RNG. It suits our purpose perfectly: it re-keys itself
- * every second, from the entropy pool (and thus creates a limited
- * drain on it), and uses halfMD4Transform within the second. We
- * also mix it with jiffies and the PID:
- */
- return secure_ip_id((__force __be32)(current->pid + jiffies));
+ struct keydata *keyptr;
+ __u32 *hash = get_cpu_var(get_random_int_hash);
+ int ret;
+
+ keyptr = get_keyptr();
+ hash[0] += current->pid + jiffies + get_cycles();
+
+ ret = half_md4_transform(hash, keyptr->secret);
+ put_cpu_var(get_random_int_hash);
+
+ return ret;
}
/*
#include <linux/vt_kern.h>
#include <linux/workqueue.h>
#include <linux/kexec.h>
-#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
&sysrq_showlocks_op, /* d */
&sysrq_term_op, /* e */
&sysrq_moom_op, /* f */
- /* g: May be registered by ppc for kgdb */
+ /* g: May be registered for the kernel debugger */
NULL, /* g */
NULL, /* h - reserved for help */
&sysrq_kill_op, /* i */
&sysrq_sync_op, /* s */
&sysrq_showstate_op, /* t */
&sysrq_mountro_op, /* u */
- /* v: May be registered at init time by SMP VOYAGER */
+ /* v: May be registered for frame buffer console restore */
NULL, /* v */
&sysrq_showstate_blocked_op, /* w */
/* x: May be registered on ppc/powerpc for xmon */
unsigned char * event_entry)
{
const char *name = "";
- char data[40] = "";
+ /* 41 so there is room for 40 data and 1 nul */
+ char data[41] = "";
int i, n_len = 0, d_len = 0;
struct tcpa_pc_event *pc_event;
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
case KIOCSOUND:
if (!perm)
goto eperm;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (arg)
arg = CLOCK_TICK_RATE / arg;
kd_mksound(arg, 0);
*/
ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
count = ticks ? (arg & 0xffff) : 0;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (count)
count = CLOCK_TICK_RATE / count;
kd_mksound(count, ticks);
return v2;
}
-static cycle_t acpi_pm_read(void)
+static cycle_t acpi_pm_read(struct clocksource *cs)
{
return (cycle_t)read_pmtmr();
}
}
__setup("acpi_pm_good", acpi_pm_good_setup);
-static cycle_t acpi_pm_read_slow(void)
+static cycle_t acpi_pm_read_slow(struct clocksource *cs)
{
return (cycle_t)acpi_pm_read_verified();
}
unsigned long count, delta;
mach_prepare_counter();
- value1 = clocksource_acpi_pm.read();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
mach_countup(&count);
- value2 = clocksource_acpi_pm.read();
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
delta = (value2 - value1) & ACPI_PM_MASK;
/* Check that the PMTMR delta is within 5% of what we expect */
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
udelay(100 * j);
- value1 = clocksource_acpi_pm.read();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
- value2 = clocksource_acpi_pm.read();
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
if (value2 == value1)
continue;
if (value2 > value1)
int use_cyclone = 0;
static void __iomem *cyclone_ptr;
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
{
return (cycle_t)readl(cyclone_ptr);
}
/* The base timer frequency, * 27 if selected */
#define HRT_FREQ 1000000
-static cycle_t read_hrt(void)
+static cycle_t read_hrt(struct clocksource *cs)
{
/* Read the timer value */
return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
static void __iomem *tcaddr;
-static cycle_t tc_get_cycles(void)
+static cycle_t tc_get_cycles(struct clocksource *cs)
{
unsigned long flags;
u32 lower, upper;
ret = -ENOMEM;
goto nomem_out;
}
- if (!alloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
free_cpumask_var(policy->cpus);
kfree(policy);
ret = -ENOMEM;
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
+ unlock_policy_rwsem_write(cpu);
+
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- unlock_policy_rwsem_write(cpu);
-
kobject_put(&data->kobj);
/* we need to make sure that the underlying kobj is actually
* (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
* cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
* is recursive for the same process. -Venki
+ * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
+ * would deadlock with cancel_delayed_work_sync(), which is needed for proper
+ * raceless workqueue teardown.
*/
static DEFINE_MUTEX(dbs_mutex);
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
dbs_info->enable = 0;
- cancel_delayed_work(&dbs_info->work);
+ cancel_delayed_work_sync(&dbs_info->work);
}
static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
* (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
* cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
* is recursive for the same process. -Venki
+ * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
+ * would deadlock with cancel_delayed_work_sync(), which is needed for proper
+ * raceless workqueue teardown.
*/
static DEFINE_MUTEX(dbs_mutex);
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
dbs_info->enable = 0;
- cancel_delayed_work(&dbs_info->work);
+ cancel_delayed_work_sync(&dbs_info->work);
}
static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
static int init_ixp_crypto(void)
{
int ret = -ENODEV;
+ u32 msg[2] = { 0, 0 };
if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
return ret;
if (!npe_running(npe_c)) {
- npe_load_firmware(npe_c, npe_name(npe_c), dev);
+ ret = npe_load_firmware(npe_c, npe_name(npe_c), dev);
+ if (ret) {
+ return ret;
+ }
+ if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
+ } else {
+ if (npe_send_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
+
+ if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
}
+ switch ((msg[1]>>16) & 0xff) {
+ case 3:
+ printk(KERN_WARNING "Firmware of %s lacks AES support\n",
+ npe_name(npe_c));
+ support_aes = 0;
+ break;
+ case 4:
+ case 5:
+ support_aes = 1;
+ break;
+ default:
+ printk(KERN_ERR "Firmware of %s lacks crypto support\n",
+ npe_name(npe_c));
+ return -ENODEV;
+ }
/* buffer_pool will also be used to sometimes store the hmac,
* so assure it is large enough
*/
qmgr_enable_irq(RECV_QID);
return 0;
+
+npe_error:
+ printk(KERN_ERR "%s not responding\n", npe_name(npe_c));
+ ret = -EIO;
err:
if (ctx_pool)
dma_pool_destroy(ctx_pool);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS("aes");
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE);
dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK |
+ DMA_COMPL_SRC_UNMAP_SINGLE |
+ DMA_COMPL_DEST_UNMAP_SINGLE;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len,
DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE);
chan = dma_request_channel(mask, filter, NULL);
if (chan) {
err = dmatest_add_channel(chan);
- if (err == 0)
- continue;
- else {
+ if (err) {
dma_release_channel(chan);
break; /* add_channel failed, punt */
}
static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
struct fsl_desc_sw *desc)
{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+ ? FSL_DMA_SNEN : 0;
+
desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
- DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL,
- 64);
+ DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
+ | snoop_bits, 64);
}
static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
- struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+ struct fsl_desc_sw *desc;
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- desc->async_tx.cookie = cookie;
- fsl_chan->common.cookie = desc->async_tx.cookie;
+ list_for_each_entry(desc, &tx->tx_list, node) {
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
- append_ld_queue(fsl_chan, desc);
- list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+ desc->async_tx.cookie = cookie;
+ }
+
+ fsl_chan->common.cookie = cookie;
+ append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
+ list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+ struct list_head *list;
size_t copy;
- LIST_HEAD(link_chain);
if (!chan)
return NULL;
if (!new) {
dev_err(fsl_chan->dev,
"No free memory for link descriptor\n");
- return NULL;
+ goto fail;
}
#ifdef FSL_DMA_LD_DEBUG
dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
- return first ? &first->async_tx : NULL;
+ return &first->async_tx;
+
+fail:
+ if (!first)
+ return NULL;
+
+ list = &first->async_tx.tx_list;
+ list_for_each_entry_safe_reverse(new, prev, list, node) {
+ list_del(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
}
/**
dma_addr_t next_dest_addr;
unsigned long flags;
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
if (!dma_is_idle(fsl_chan))
- return;
+ goto out_unlock;
dma_halt(fsl_chan);
/* If there are some link descriptors
* not transfered in queue. We need to start it.
*/
- spin_lock_irqsave(&fsl_chan->desc_lock, flags);
/* Find the first un-transfer desciptor */
for (ld_node = fsl_chan->ld_queue.next;
fsl_chan->common.cookie) == DMA_SUCCESS);
ld_node = ld_node->next);
- spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
-
if (ld_node != &fsl_chan->ld_queue) {
/* Get the ld start address from ld_queue */
next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
- dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n",
- (void *)next_dest_addr);
+ dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n",
+ (unsigned long long)next_dest_addr);
set_cdar(fsl_chan, next_dest_addr);
dma_start(fsl_chan);
} else {
set_cdar(fsl_chan, 0);
set_ndar(fsl_chan, 0);
}
+
+out_unlock:
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
}
/**
*/
if (stat & FSL_DMA_SR_EOSI) {
dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
- dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n",
- (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan));
+ dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n",
+ (unsigned long long)get_cdar(fsl_chan),
+ (unsigned long long)get_ndar(fsl_chan));
stat &= ~FSL_DMA_SR_EOSI;
update_cookie = 1;
}
new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
- if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
+ if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
dev_err(fdev->dev, "There is no %d channel!\n",
new_fsl_chan->id);
err = -EINVAL;
}
dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
- "controller at %p...\n",
- match->compatible, (void *)fdev->reg.start);
+ "controller at 0x%llx...\n",
+ match->compatible, (unsigned long long)fdev->reg.start);
fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
- fdev->reg.start + 1);
xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
- if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
device->common.chancnt--;
}
#endif
static void
ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
{
- /*
- * yes we are unmapping both _page and _single
- * alloc'd regions with unmap_page. Is this
- * *really* that bad?
- */
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP))
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
-
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP))
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
+ if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ pci_unmap_single(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, dst),
+ pci_unmap_len(desc, len),
+ PCI_DMA_FROMDEVICE);
+ else
+ pci_unmap_page(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, dst),
+ pci_unmap_len(desc, len),
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ pci_unmap_single(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, src),
+ pci_unmap_len(desc, len),
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_page(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, src),
+ pci_unmap_len(desc, len),
+ PCI_DMA_TODEVICE);
+ }
}
/**
int err = 0;
struct completion cmp;
unsigned long tmo;
+ unsigned long flags;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
DMA_TO_DEVICE);
dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
DMA_FROM_DEVICE);
+ flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
- IOAT_TEST_SIZE, 0);
+ IOAT_TEST_SIZE, flags);
if (!tx) {
dev_err(&device->pdev->dev,
"Self-test prep failed, disabling\n");
/* Other interrupts do not interfere with this channel */
spin_lock(&ichan->lock);
if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
- ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+ ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
+ !list_is_last(ichan->queue.next, &ichan->queue))) {
int i = 100;
/* This doesn't help. See comment in ipu_disable_channel() */
struct idmac_channel *ichan = dev_id;
printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n",
irq, ichan->dma_chan.chan_id);
- disable_irq(irq);
+ disable_irq_nosync(irq);
return IRQ_HANDLED;
}
struct idmac_channel *ichan = dev_id;
printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n",
irq, ichan->dma_chan.chan_id);
- disable_irq(irq);
+ disable_irq_nosync(irq);
return IRQ_HANDLED;
}
config EDAC_AMD8131
tristate "AMD8131 HyperTransport PCI-X Tunnel"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8131 HyperTransport PCI-X Tunnel chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
config EDAC_AMD8111
tristate "AMD8111 HyperTransport I/O Hub"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8111 HyperTransport I/O Hub chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
endif # EDAC
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = dev_info->check;
pci_info->edac_dev->dev = &pci_info->dev->dev;
pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
pci_info->edac_dev->ctl_name = pci_info->ctl_name;
- pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id;
+ pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
pci_info->edac_dev->edac_check = pci_info->check;
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = amd8131_chipset.check;
pci_write_config_word(pdev, offset, value);
}
-/* write all or some bits in a dword-register*/
+/*
+ * pci_write_bits32
+ *
+ * edac local routine to do pci_write_config_dword, but adds
+ * a mask parameter. If mask is all ones, ignore the mask.
+ * Otherwise utilize the mask to isolate specified bits
+ *
+ * write all or some bits in a dword-register
+ */
static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
u32 value, u32 mask)
{
- if (mask != 0xffff) {
+ if (mask != 0xffffffff) {
u32 buf;
pci_read_config_dword(pdev, offset, &buf);
*/
static void edac_device_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work);
mutex_lock(&device_ctls_mutex);
*/
static void edac_mc_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
mutex_lock(&mem_ctls_mutex);
*/
static void edac_pci_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work);
int msec;
unsigned long delay;
int row_index;
err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
- if (err_detect)
+ if (!err_detect)
return;
mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n",
rc = 1;
break;
case ibft_eth_ip_addr:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
rc = 1;
break;
case ibft_eth_subnet_mask:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (nic->subnet_mask_prefix)
rc = 1;
break;
case ibft_eth_origin:
will load the correct one.
config DRM_I915
+ tristate "i915 driver"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB
- tristate "i915 driver"
+ select FRAMEBUFFER_CONSOLE if !EMBEDDED
+ # i915 depends on ACPI_VIDEO when ACPI is enabled
+ # but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
+ select ACPI_VIDEO if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
}
DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n",
(unsigned long long)map->offset, map->size, map->type);
+
+ /* page-align _DRM_SHM maps. They are allocated here so there is no security
+ * hole created by that and it works around various broken drivers that use
+ * a non-aligned quantity to map the SAREA. --BenH
+ */
+ if (map->type == _DRM_SHM)
+ map->size = PAGE_ALIGN(map->size);
+
if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) {
drm_free(map, sizeof(*map), DRM_MEM_MAPS);
return -EINVAL;
}
}
- if (connector->funcs->set_property)
+ /* Do DPMS ourselves */
+ if (property == connector->dev->mode_config.dpms_property) {
+ if (connector->funcs->dpms)
+ (*connector->funcs->dpms)(connector, (int) out_resp->value);
+ ret = 0;
+ } else if (connector->funcs->set_property)
ret = connector->funcs->set_property(connector, property, out_resp->value);
/* store the property value if succesful */
}
}
+/**
+ * drm_helper_encoder_in_use - check if a given encoder is in use
+ * @encoder: encoder to check
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Walk @encoders's DRM device's mode_config and see if it's in use.
+ *
+ * RETURNS:
+ * True if @encoder is part of the mode_config, false otherwise.
+ */
+bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
+{
+ struct drm_connector *connector;
+ struct drm_device *dev = encoder->dev;
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder == encoder)
+ return true;
+ return false;
+}
+EXPORT_SYMBOL(drm_helper_encoder_in_use);
+
/**
* drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
* @crtc: CRTC to check
struct drm_device *dev = crtc->dev;
/* FIXME: Locking around list access? */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
- if (encoder->crtc == crtc)
+ if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
return true;
return false;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
encoder_funcs = encoder->helper_private;
- if (!encoder->crtc)
+ if (!drm_helper_encoder_in_use(encoder))
(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
}
int saved_x, saved_y;
struct drm_encoder *encoder;
bool ret = true;
- bool depth_changed, bpp_changed;
adjusted_mode = drm_mode_duplicate(dev, mode);
if (!crtc->enabled)
return true;
- if (old_fb && crtc->fb) {
- depth_changed = (old_fb->depth != crtc->fb->depth);
- bpp_changed = (old_fb->bits_per_pixel !=
- crtc->fb->bits_per_pixel);
- } else {
- depth_changed = true;
- bpp_changed = true;
- }
-
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
crtc->x = x;
crtc->y = y;
- if (drm_mode_equal(&saved_mode, &crtc->mode)) {
- if (saved_x != crtc->x || saved_y != crtc->y ||
- depth_changed || bpp_changed) {
- ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
- old_fb);
- goto done;
- }
- }
-
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
}
EXPORT_SYMBOL(drm_helper_initial_config);
+static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
+{
+ int dpms = DRM_MODE_DPMS_OFF;
+ struct drm_connector *connector;
+ struct drm_device *dev = encoder->dev;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder == encoder)
+ if (connector->dpms < dpms)
+ dpms = connector->dpms;
+ return dpms;
+}
+
+static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
+{
+ int dpms = DRM_MODE_DPMS_OFF;
+ struct drm_connector *connector;
+ struct drm_device *dev = crtc->dev;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder && connector->encoder->crtc == crtc)
+ if (connector->dpms < dpms)
+ dpms = connector->dpms;
+ return dpms;
+}
+
+/**
+ * drm_helper_connector_dpms
+ * @connector affected connector
+ * @mode DPMS mode
+ *
+ * Calls the low-level connector DPMS function, then
+ * calls appropriate encoder and crtc DPMS functions as well
+ */
+void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
+{
+ struct drm_encoder *encoder = connector->encoder;
+ struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
+ int old_dpms;
+
+ if (mode == connector->dpms)
+ return;
+
+ old_dpms = connector->dpms;
+ connector->dpms = mode;
+
+ /* from off to on, do crtc then encoder */
+ if (mode < old_dpms) {
+ if (crtc) {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
+ }
+ if (encoder) {
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ if (encoder_funcs->dpms)
+ (*encoder_funcs->dpms) (encoder,
+ drm_helper_choose_encoder_dpms(encoder));
+ }
+ }
+
+ /* from on to off, do encoder then crtc */
+ if (mode > old_dpms) {
+ if (encoder) {
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ if (encoder_funcs->dpms)
+ (*encoder_funcs->dpms) (encoder,
+ drm_helper_choose_encoder_dpms(encoder));
+ }
+ if (crtc) {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
+ }
+ }
+
+ return;
+}
+EXPORT_SYMBOL(drm_helper_connector_dpms);
+
/**
* drm_hotplug_stage_two
* @dev DRM device
retcode = -EINVAL;
} else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) ||
((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) ||
- ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) {
+ ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) ||
+ (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) {
retcode = -EACCES;
} else {
if (cmd & (IOC_IN | IOC_OUT)) {
}
retcode = func(dev, kdata, file_priv);
- if ((retcode == 0) && (cmd & IOC_OUT)) {
+ if (cmd & IOC_OUT) {
if (copy_to_user((void __user *)arg, kdata,
_IOC_SIZE(cmd)) != 0)
retcode = -EFAULT;
struct drm_display_mode *mode;
struct detailed_pixel_timing *pt = &timing->data.pixel_data;
+ /* ignore tiny modes */
+ if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 ||
+ ((pt->vactive_hi << 8) | pt->hactive_lo) < 64)
+ return NULL;
+
if (pt->stereo) {
printk(KERN_WARNING "stereo mode not supported\n");
return NULL;
{
int ret = 0;
unsigned long sh_flags = 0;
+ char *irqname;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED))
sh_flags = IRQF_SHARED;
+ if (dev->devname)
+ irqname = dev->devname;
+ else
+ irqname = dev->driver->name;
+
ret = request_irq(drm_dev_to_irq(dev), dev->driver->irq_handler,
- sh_flags, dev->devname, dev);
+ sh_flags, irqname, dev);
if (ret < 0) {
mutex_lock(&dev->struct_mutex);
int drm_setmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ if (file_priv->is_master)
+ return 0;
+
if (file_priv->minor->master && file_priv->minor->master != file_priv->master)
return -EINVAL;
file_priv->minor->master != file_priv->master) {
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
+ file_priv->is_master = 1;
mutex_unlock(&dev->struct_mutex);
}
int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- if (!file_priv->master)
+ if (!file_priv->is_master)
+ return -EINVAL;
+
+ if (!file_priv->minor->master)
return -EINVAL;
+
mutex_lock(&dev->struct_mutex);
drm_master_put(&file_priv->minor->master);
+ file_priv->is_master = 0;
mutex_unlock(&dev->struct_mutex);
return 0;
}
if (dev->driver->load) {
ret = dev->driver->load(dev, ent->driver_data);
if (ret)
- goto err_g3;
+ goto err_g4;
}
/* setup the grouping for the legacy output */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
if (ret)
- goto err_g3;
+ goto err_g4;
}
list_add_tail(&dev->driver_item, &driver->device_list);
return 0;
-err_g3:
+err_g4:
drm_put_minor(&dev->primary);
+err_g3:
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ drm_put_minor(&dev->control);
err_g2:
pci_disable_device(pdev);
err_g1:
dev->agp = NULL;
}
- drm_ht_remove(&dev->map_hash);
- drm_ctxbitmap_cleanup(dev);
-
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
drm_rmmap(dev, r_list->map);
+ drm_ht_remove(&dev->map_hash);
+
+ drm_ctxbitmap_cleanup(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_put_minor(&dev->control);
*/
static void drm_sysfs_device_release(struct device *dev)
{
+ memset(dev, 0, sizeof(struct device));
return;
}
enum drm_connector_status status;
status = connector->funcs->detect(connector);
- return snprintf(buf, PAGE_SIZE, "%s",
+ return snprintf(buf, PAGE_SIZE, "%s\n",
drm_get_connector_status_name(status));
}
if (ret)
return 0;
- return snprintf(buf, PAGE_SIZE, "%s",
+ return snprintf(buf, PAGE_SIZE, "%s\n",
drm_get_dpms_name((int)dpms_status));
}
{
struct drm_connector *connector = to_drm_connector(device);
- return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" :
+ return snprintf(buf, PAGE_SIZE, "%s\n", connector->encoder ? "enabled" :
"disabled");
}
static struct bin_attribute edid_attr = {
.attr.name = "edid",
+ .attr.mode = 0444,
.size = 128,
.read = edid_show,
};
return 0;
- device_unregister(&minor->kdev);
err_out:
-
return err;
}
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
- goto fail_batch_free;
+ goto fail_clip_free;
}
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
-fail_batch_free:
- drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
fail_clip_free:
drm_free(cliprects,
cmdbuf->num_cliprects * sizeof(struct drm_clip_rect),
DRM_MEM_DRIVER);
+fail_batch_free:
+ drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
return ret;
}
int fb_bar = IS_I9XX(dev) ? 2 : 0;
int ret = 0;
- dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL);
- if (!dev->devname) {
- ret = -ENOMEM;
- goto out;
- }
-
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
if (ret)
- goto kfree_devname;
+ goto out;
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
- /* Let GEM Manage from end of prealloc space to end of aperture */
- i915_gem_do_init(dev, prealloc_size, agp_size);
+ /* Let GEM Manage from end of prealloc space to end of aperture.
+ *
+ * However, leave one page at the end still bound to the scratch page.
+ * There are a number of places where the hardware apparently
+ * prefetches past the end of the object, and we've seen multiple
+ * hangs with the GPU head pointer stuck in a batchbuffer bound
+ * at the last page of the aperture. One page should be enough to
+ * keep any prefetching inside of the aperture.
+ */
+ i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
ret = i915_gem_init_ringbuffer(dev);
if (ret)
- goto kfree_devname;
+ goto out;
/* Allow hardware batchbuffers unless told otherwise.
*/
destroy_ringbuffer:
i915_gem_cleanup_ringbuffer(dev);
-kfree_devname:
- kfree(dev->devname);
out:
return ret;
}
if (dev_priv->regs != NULL)
iounmap(dev_priv->regs);
- intel_opregion_free(dev);
+ intel_opregion_free(dev, 0);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_modeset_cleanup(dev);
DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
+ DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
drm_irq_uninstall(dev);
}
- intel_opregion_free(dev);
+ intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
int backlight_duty_cycle; /* restore backlight to this value */
bool panel_wants_dither;
struct drm_display_mode *panel_fixed_mode;
- struct drm_display_mode *vbt_mode; /* if any */
+ struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
+ struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
/* Feature bits from the VBIOS */
unsigned int int_tv_support:1;
u8 saveAR[21];
u8 saveDACMASK;
u8 saveCR[37];
+ uint64_t saveFENCE[16];
struct {
struct drm_mm gtt_space;
uint32_t tiling_mode;
uint32_t stride;
+ /** Record of address bit 17 of each page at last unbind. */
+ long *bit_17;
+
/** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */
uint32_t agp_type;
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj);
void i915_gem_free_all_phys_object(struct drm_device *dev);
+int i915_gem_object_get_pages(struct drm_gem_object *obj);
+void i915_gem_object_put_pages(struct drm_gem_object *obj);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
+void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
+void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
#ifdef CONFIG_ACPI
/* i915_opregion.c */
extern int intel_opregion_init(struct drm_device *dev, int resume);
-extern void intel_opregion_free(struct drm_device *dev);
+extern void intel_opregion_free(struct drm_device *dev, int suspend);
extern void opregion_asle_intr(struct drm_device *dev);
extern void opregion_enable_asle(struct drm_device *dev);
#else
static inline int intel_opregion_init(struct drm_device *dev, int resume) { return 0; }
-static inline void intel_opregion_free(struct drm_device *dev) { return; }
+static inline void intel_opregion_free(struct drm_device *dev, int suspend) { return; }
static inline void opregion_asle_intr(struct drm_device *dev) { return; }
static inline void opregion_enable_asle(struct drm_device *dev) { return; }
#endif
#define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg))
#define I915_READ8(reg) readb(dev_priv->regs + (reg))
#define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg))
-#ifdef writeq
#define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg))
-#else
-#define I915_WRITE64(reg, val) (writel(val, dev_priv->regs + (reg)), \
- writel(upper_32_bits(val), dev_priv->regs + \
- (reg) + 4))
-#endif
+#define I915_READ64(reg) readq(dev_priv->regs + (reg))
#define POSTING_READ(reg) (void)I915_READ(reg)
#define I915_VERBOSE 0
(dev)->pci_device == 0x2A42 || \
(dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22)
+ (dev)->pci_device == 0x2E22 || \
+ (dev)->pci_device == 0x2E32)
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
+ (dev)->pci_device == 0x2A12)
#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
+ (dev)->pci_device == 0x2E32 || \
IS_GM45(dev))
#define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
uint64_t offset,
uint64_t size);
static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
-static int i915_gem_object_get_pages(struct drm_gem_object *obj);
-static void i915_gem_object_put_pages(struct drm_gem_object *obj);
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
unsigned alignment);
int length)
{
char __iomem *vaddr;
- int ret;
+ int unwritten;
vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0);
if (vaddr == NULL)
return -ENOMEM;
- ret = __copy_to_user_inatomic(data, vaddr + page_offset, length);
+ unwritten = __copy_to_user_inatomic(data, vaddr + page_offset, length);
kunmap_atomic(vaddr, KM_USER0);
- return ret;
+ if (unwritten)
+ return -EFAULT;
+
+ return 0;
+}
+
+static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj)
+{
+ drm_i915_private_t *dev_priv = obj->dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
}
static inline int
return 0;
}
+static inline int
+slow_shmem_bit17_copy(struct page *gpu_page,
+ int gpu_offset,
+ struct page *cpu_page,
+ int cpu_offset,
+ int length,
+ int is_read)
+{
+ char *gpu_vaddr, *cpu_vaddr;
+
+ /* Use the unswizzled path if this page isn't affected. */
+ if ((page_to_phys(gpu_page) & (1 << 17)) == 0) {
+ if (is_read)
+ return slow_shmem_copy(cpu_page, cpu_offset,
+ gpu_page, gpu_offset, length);
+ else
+ return slow_shmem_copy(gpu_page, gpu_offset,
+ cpu_page, cpu_offset, length);
+ }
+
+ gpu_vaddr = kmap_atomic(gpu_page, KM_USER0);
+ if (gpu_vaddr == NULL)
+ return -ENOMEM;
+
+ cpu_vaddr = kmap_atomic(cpu_page, KM_USER1);
+ if (cpu_vaddr == NULL) {
+ kunmap_atomic(gpu_vaddr, KM_USER0);
+ return -ENOMEM;
+ }
+
+ /* Copy the data, XORing A6 with A17 (1). The user already knows he's
+ * XORing with the other bits (A9 for Y, A9 and A10 for X)
+ */
+ while (length > 0) {
+ int cacheline_end = ALIGN(gpu_offset + 1, 64);
+ int this_length = min(cacheline_end - gpu_offset, length);
+ int swizzled_gpu_offset = gpu_offset ^ 64;
+
+ if (is_read) {
+ memcpy(cpu_vaddr + cpu_offset,
+ gpu_vaddr + swizzled_gpu_offset,
+ this_length);
+ } else {
+ memcpy(gpu_vaddr + swizzled_gpu_offset,
+ cpu_vaddr + cpu_offset,
+ this_length);
+ }
+ cpu_offset += this_length;
+ gpu_offset += this_length;
+ length -= this_length;
+ }
+
+ kunmap_atomic(cpu_vaddr, KM_USER1);
+ kunmap_atomic(gpu_vaddr, KM_USER0);
+
+ return 0;
+}
+
/**
* This is the fast shmem pread path, which attempts to copy_from_user directly
* from the backing pages of the object to the user's address space. On a
int page_length;
int ret;
uint64_t data_ptr = args->data_ptr;
+ int do_bit17_swizzling;
remain = args->size;
last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
num_pages = last_data_page - first_data_page + 1;
- user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+ user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
if (user_pages == NULL)
return -ENOMEM;
down_read(&mm->mmap_sem);
pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr,
- num_pages, 0, 0, user_pages, NULL);
+ num_pages, 1, 0, user_pages, NULL);
up_read(&mm->mmap_sem);
if (pinned_pages < num_pages) {
ret = -EFAULT;
goto fail_put_user_pages;
}
+ do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_shmem_copy(user_pages[data_page_index],
- data_page_offset,
- obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- page_length);
+ if (do_bit17_swizzling) {
+ ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 1);
+ } else {
+ ret = slow_shmem_copy(user_pages[data_page_index],
+ data_page_offset,
+ obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ page_length);
+ }
if (ret)
goto fail_put_pages;
SetPageDirty(user_pages[i]);
page_cache_release(user_pages[i]);
}
- kfree(user_pages);
+ drm_free_large(user_pages);
return ret;
}
return -EINVAL;
}
- ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
- if (ret != 0)
+ if (i915_gem_object_needs_bit17_swizzle(obj)) {
ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv);
+ } else {
+ ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
+ if (ret != 0)
+ ret = i915_gem_shmem_pread_slow(dev, obj, args,
+ file_priv);
+ }
drm_gem_object_unreference(obj);
last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
num_pages = last_data_page - first_data_page + 1;
- user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+ user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
if (user_pages == NULL)
return -ENOMEM;
out_unpin_pages:
for (i = 0; i < pinned_pages; i++)
page_cache_release(user_pages[i]);
- kfree(user_pages);
+ drm_free_large(user_pages);
return ret;
}
int page_length;
int ret;
uint64_t data_ptr = args->data_ptr;
+ int do_bit17_swizzling;
remain = args->size;
last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
num_pages = last_data_page - first_data_page + 1;
- user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+ user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
if (user_pages == NULL)
return -ENOMEM;
goto fail_put_user_pages;
}
+ do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length);
+ if (do_bit17_swizzling) {
+ ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 0);
+ } else {
+ ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length);
+ }
if (ret)
goto fail_put_pages;
fail_put_user_pages:
for (i = 0; i < pinned_pages; i++)
page_cache_release(user_pages[i]);
- kfree(user_pages);
+ drm_free_large(user_pages);
return ret;
}
ret = i915_gem_gtt_pwrite_slow(dev, obj, args,
file_priv);
}
+ } else if (i915_gem_object_needs_bit17_swizzle(obj)) {
+ ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file_priv);
} else {
ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file_priv);
if (ret == -EFAULT) {
mutex_unlock(&dev->struct_mutex);
return VM_FAULT_SIGBUS;
}
- list_add(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret) {
+ mutex_unlock(&dev->struct_mutex);
+ return VM_FAULT_SIGBUS;
+ }
+
+ list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
}
/* Need a new fence register? */
mutex_unlock(&dev->struct_mutex);
return ret;
}
- list_add(&obj_priv->list, &dev_priv->mm.inactive_list);
+ list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
}
drm_gem_object_unreference(obj);
return 0;
}
-static void
+void
i915_gem_object_put_pages(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (--obj_priv->pages_refcount != 0)
return;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_save_bit_17_swizzle(obj);
+
for (i = 0; i < page_count; i++)
if (obj_priv->pages[i] != NULL) {
if (obj_priv->dirty)
}
obj_priv->dirty = 0;
- drm_free(obj_priv->pages,
- page_count * sizeof(struct page *),
- DRM_MEM_DRIVER);
+ drm_free_large(obj_priv->pages);
obj_priv->pages = NULL;
}
if (obj->write_domain != 0)
i915_gem_object_move_to_flushing(obj);
- else
+ else {
+ /* Take a reference on the object so it won't be
+ * freed while the spinlock is held. The list
+ * protection for this spinlock is safe when breaking
+ * the lock like this since the next thing we do
+ * is just get the head of the list again.
+ */
+ drm_gem_object_reference(obj);
i915_gem_object_move_to_inactive(obj);
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ drm_gem_object_unreference(obj);
+ spin_lock(&dev_priv->mm.active_list_lock);
+ }
}
out:
spin_unlock(&dev_priv->mm.active_list_lock);
i915_wait_request(struct drm_device *dev, uint32_t seqno)
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 ier;
int ret = 0;
BUG_ON(seqno == 0);
if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+ ier = I915_READ(IER);
+ if (!ier) {
+ DRM_ERROR("something (likely vbetool) disabled "
+ "interrupts, re-enabling\n");
+ i915_driver_irq_preinstall(dev);
+ i915_driver_irq_postinstall(dev);
+ }
+
dev_priv->mm.waiting_gem_seqno = seqno;
i915_user_irq_get(dev);
ret = wait_event_interruptible(dev_priv->irq_queue,
return ret;
}
-static int
+int
i915_gem_object_get_pages(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
*/
page_count = obj->size / PAGE_SIZE;
BUG_ON(obj_priv->pages != NULL);
- obj_priv->pages = drm_calloc(page_count, sizeof(struct page *),
- DRM_MEM_DRIVER);
+ obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *));
if (obj_priv->pages == NULL) {
DRM_ERROR("Faled to allocate page list\n");
obj_priv->pages_refcount--;
}
obj_priv->pages[i] = page;
}
+
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_do_bit_17_swizzle(obj);
+
return 0;
}
return;
}
- pitch_val = (obj_priv->stride / 128) - 1;
- WARN_ON(pitch_val & ~0x0000000f);
+ pitch_val = obj_priv->stride / 128;
+ pitch_val = ffs(pitch_val) - 1;
+ WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
goto try_again;
}
- BUG_ON(old_obj_priv->active ||
- (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
-
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
if (obj_priv->pages == NULL)
return;
+ /* XXX: The 865 in particular appears to be weird in how it handles
+ * cache flushing. We haven't figured it out, but the
+ * clflush+agp_chipset_flush doesn't appear to successfully get the
+ * data visible to the PGU, while wbinvd + agp_chipset_flush does.
+ */
+ if (IS_I865G(obj->dev)) {
+ wbinvd();
+ return;
+ }
+
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}
reloc_count += exec_list[i].relocation_count;
}
- *relocs = drm_calloc(reloc_count, sizeof(**relocs), DRM_MEM_DRIVER);
+ *relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
if (*relocs == NULL)
return -ENOMEM;
exec_list[i].relocation_count *
sizeof(**relocs));
if (ret != 0) {
- drm_free(*relocs, reloc_count * sizeof(**relocs),
- DRM_MEM_DRIVER);
+ drm_free_large(*relocs);
*relocs = NULL;
- return ret;
+ return -EFAULT;
}
reloc_index += exec_list[i].relocation_count;
}
- return ret;
+ return 0;
}
static int
struct drm_i915_gem_relocation_entry *relocs)
{
uint32_t reloc_count = 0, i;
- int ret;
+ int ret = 0;
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
+ int unwritten;
user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
- if (ret == 0) {
- ret = copy_to_user(user_relocs,
- &relocs[reloc_count],
- exec_list[i].relocation_count *
- sizeof(*relocs));
+ unwritten = copy_to_user(user_relocs,
+ &relocs[reloc_count],
+ exec_list[i].relocation_count *
+ sizeof(*relocs));
+
+ if (unwritten) {
+ ret = -EFAULT;
+ goto err;
}
reloc_count += exec_list[i].relocation_count;
}
- drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER);
+err:
+ drm_free_large(relocs);
return ret;
}
return -EINVAL;
}
/* Copy in the exec list from userland */
- exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count,
- DRM_MEM_DRIVER);
- object_list = drm_calloc(sizeof(*object_list), args->buffer_count,
- DRM_MEM_DRIVER);
+ exec_list = drm_calloc_large(sizeof(*exec_list), args->buffer_count);
+ object_list = drm_calloc_large(sizeof(*object_list), args->buffer_count);
if (exec_list == NULL || object_list == NULL) {
DRM_ERROR("Failed to allocate exec or object list "
"for %d buffers\n",
exec_offset = exec_list[args->buffer_count - 1].offset;
#if WATCH_EXEC
- i915_gem_dump_object(object_list[args->buffer_count - 1],
+ i915_gem_dump_object(batch_obj,
args->batch_len,
__func__,
~0);
(uintptr_t) args->buffers_ptr,
exec_list,
sizeof(*exec_list) * args->buffer_count);
- if (ret)
+ if (ret) {
+ ret = -EFAULT;
DRM_ERROR("failed to copy %d exec entries "
"back to user (%d)\n",
args->buffer_count, ret);
+ }
}
/* Copy the updated relocations out regardless of current error
}
pre_mutex_err:
- drm_free(object_list, sizeof(*object_list) * args->buffer_count,
- DRM_MEM_DRIVER);
- drm_free(exec_list, sizeof(*exec_list) * args->buffer_count,
- DRM_MEM_DRIVER);
+ drm_free_large(object_list);
+ drm_free_large(exec_list);
drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects,
DRM_MEM_DRIVER);
i915_gem_free_mmap_offset(obj);
drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+ kfree(obj_priv->bit_17);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
}
dev_priv->mm.suspended = 0;
ret = i915_gem_init_ringbuffer(dev);
- if (ret != 0)
+ if (ret != 0) {
+ mutex_unlock(&dev->struct_mutex);
return ret;
+ }
spin_lock(&dev_priv->mm.active_list_lock);
BUG_ON(!list_empty(&dev_priv->mm.active_list));
return 0;
}
+static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_count)
+{
+ int page, i;
+ uint32_t *mem;
+
+ for (page = 0; page < page_count; page++) {
+ mem = kmap(pages[page]);
+ for (i = 0; i < PAGE_SIZE; i += 4)
+ seq_printf(m, "%08x : %08x\n", i, mem[i / 4]);
+ kunmap(pages[page]);
+ }
+}
+
+static int i915_batchbuffer_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+ int ret;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+
+ list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ obj = obj_priv->obj;
+ if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
+ ret = i915_gem_object_get_pages(obj);
+ if (ret) {
+ DRM_ERROR("Failed to get pages: %d\n", ret);
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ return ret;
+ }
+
+ seq_printf(m, "--- gtt_offset = 0x%08x\n", obj_priv->gtt_offset);
+ i915_dump_pages(m, obj_priv->pages, obj->size / PAGE_SIZE);
+
+ i915_gem_object_put_pages(obj);
+ }
+ }
+
+ spin_unlock(&dev_priv->mm.active_list_lock);
+
+ return 0;
+}
+
+static int i915_ringbuffer_data(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u8 *virt;
+ uint32_t *ptr, off;
+
+ if (!dev_priv->ring.ring_obj) {
+ seq_printf(m, "No ringbuffer setup\n");
+ return 0;
+ }
+
+ virt = dev_priv->ring.virtual_start;
+
+ for (off = 0; off < dev_priv->ring.Size; off += 4) {
+ ptr = (uint32_t *)(virt + off);
+ seq_printf(m, "%08x : %08x\n", off, *ptr);
+ }
+
+ return 0;
+}
+
+static int i915_ringbuffer_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned int head, tail, mask;
+
+ head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+ tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+ mask = dev_priv->ring.tail_mask;
+
+ seq_printf(m, "RingHead : %08x\n", head);
+ seq_printf(m, "RingTail : %08x\n", tail);
+ seq_printf(m, "RingMask : %08x\n", mask);
+ seq_printf(m, "RingSize : %08lx\n", dev_priv->ring.Size);
+ seq_printf(m, "Acthd : %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
+
+ return 0;
+}
+
+
static struct drm_info_list i915_gem_debugfs_list[] = {
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
{"i915_gem_fence_regs", i915_gem_fence_regs_info, 0},
{"i915_gem_interrupt", i915_interrupt_info, 0},
{"i915_gem_hws", i915_hws_info, 0},
+ {"i915_ringbuffer_data", i915_ringbuffer_data, 0},
+ {"i915_ringbuffer_info", i915_ringbuffer_info, 0},
+ {"i915_batchbuffers", i915_batchbuffer_info, 0},
};
#define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
*
*/
+#include "linux/string.h"
+#include "linux/bitops.h"
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
} else {
/* Bit 17 swizzling by the CPU in addition. */
- swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
- swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+ swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
+ swizzle_y = I915_BIT_6_SWIZZLE_9_17;
}
break;
}
if (tiling_mode == I915_TILING_NONE)
return true;
- if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+ if (!IS_I9XX(dev) ||
+ (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
tile_width = 128;
else
tile_width = 512;
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else if (IS_I9XX(dev)) {
- if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
+ * instead of 4 (2KB) on 945s.
+ */
+ if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 20))
return false;
} else {
- if (stride / 128 > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 19))
return false;
}
mutex_lock(&dev->struct_mutex);
if (args->tiling_mode == I915_TILING_NONE) {
- obj_priv->tiling_mode = I915_TILING_NONE;
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
} else {
if (args->tiling_mode == I915_TILING_X)
args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
else
args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
+
+ /* Hide bit 17 swizzling from the user. This prevents old Mesa
+ * from aborting the application on sw fallbacks to bit 17,
+ * and we use the pread/pwrite bit17 paths to swizzle for it.
+ * If there was a user that was relying on the swizzle
+ * information for drm_intel_bo_map()ed reads/writes this would
+ * break it, but we don't have any of those.
+ */
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
/* If we can't handle the swizzling, make it untiled. */
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
args->tiling_mode = I915_TILING_NONE;
DRM_ERROR("unknown tiling mode\n");
}
+ /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return 0;
}
+
+/**
+ * Swap every 64 bytes of this page around, to account for it having a new
+ * bit 17 of its physical address and therefore being interpreted differently
+ * by the GPU.
+ */
+static int
+i915_gem_swizzle_page(struct page *page)
+{
+ char *vaddr;
+ int i;
+ char temp[64];
+
+ vaddr = kmap(page);
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < PAGE_SIZE; i += 128) {
+ memcpy(temp, &vaddr[i], 64);
+ memcpy(&vaddr[i], &vaddr[i + 64], 64);
+ memcpy(&vaddr[i + 64], temp, 64);
+ }
+
+ kunmap(page);
+
+ return 0;
+}
+
+void
+i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int page_count = obj->size >> PAGE_SHIFT;
+ int i;
+
+ if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+ return;
+
+ if (obj_priv->bit_17 == NULL)
+ return;
+
+ for (i = 0; i < page_count; i++) {
+ char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17;
+ if ((new_bit_17 & 0x1) !=
+ (test_bit(i, obj_priv->bit_17) != 0)) {
+ int ret = i915_gem_swizzle_page(obj_priv->pages[i]);
+ if (ret != 0) {
+ DRM_ERROR("Failed to swizzle page\n");
+ return;
+ }
+ set_page_dirty(obj_priv->pages[i]);
+ }
+ }
+}
+
+void
+i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int page_count = obj->size >> PAGE_SHIFT;
+ int i;
+
+ if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+ return;
+
+ if (obj_priv->bit_17 == NULL) {
+ obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
+ sizeof(long), GFP_KERNEL);
+ if (obj_priv->bit_17 == NULL) {
+ DRM_ERROR("Failed to allocate memory for bit 17 "
+ "record\n");
+ return;
+ }
+ }
+
+ for (i = 0; i < page_count; i++) {
+ if (page_to_phys(obj_priv->pages[i]) & (1 << 17))
+ __set_bit(i, obj_priv->bit_17);
+ else
+ __clear_bit(i, obj_priv->bit_17);
+ }
+}
drm_i915_irq_emit_t *emit = data;
int result;
- if (!dev_priv) {
+ if (!dev_priv || !dev_priv->ring.virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (mboxes & MBOX_ACPI) {
DRM_DEBUG("Public ACPI methods supported\n");
opregion->acpi = base + OPREGION_ACPI_OFFSET;
- if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
intel_didl_outputs(dev);
- if (!resume)
- acpi_video_register();
- }
} else {
DRM_DEBUG("Public ACPI methods not supported\n");
err = -ENOTSUPP;
if (mboxes & MBOX_ASLE) {
DRM_DEBUG("ASLE supported\n");
opregion->asle = base + OPREGION_ASLE_OFFSET;
+ opregion_enable_asle(dev);
}
+ if (!resume)
+ acpi_video_register();
+
+
/* Notify BIOS we are ready to handle ACPI video ext notifs.
* Right now, all the events are handled by the ACPI video module.
* We don't actually need to do anything with them. */
return err;
}
-void intel_opregion_free(struct drm_device *dev)
+void intel_opregion_free(struct drm_device *dev, int suspend)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
if (!opregion->enabled)
return;
+ if (!suspend)
+ acpi_video_exit();
+
opregion->acpi->drdy = 0;
system_opregion = NULL;
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I830_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define I915_FENCE_START_MASK 0x0ff00000
#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
#define D_STATE 0x6104
#define CG_2D_DIS 0x6200
+#define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24)
#define CG_3D_DIS 0x6204
/*
/* Cursor A & B regs */
#define CURACNTR 0x70080
+/* Old style CUR*CNTR flags (desktop 8xx) */
+#define CURSOR_ENABLE 0x80000000
+#define CURSOR_GAMMA_ENABLE 0x40000000
+#define CURSOR_STRIDE_MASK 0x30000000
+#define CURSOR_FORMAT_SHIFT 24
+#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT)
+/* New style CUR*CNTR flags */
+#define CURSOR_MODE 0x27
#define CURSOR_MODE_DISABLE 0x00
#define CURSOR_MODE_64_32B_AX 0x07
#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define MCURSOR_PIPE_SELECT (1 << 28)
+#define MCURSOR_PIPE_A 0x00
+#define MCURSOR_PIPE_B (1 << 28)
#define MCURSOR_GAMMA_ENABLE (1 << 26)
#define CURABASE 0x70084
#define CURAPOS 0x70088
#define CURSOR_POS_SIGN 0x8000
#define CURSOR_X_SHIFT 0
#define CURSOR_Y_SHIFT 16
+#define CURSIZE 0x700a0
#define CURBCNTR 0x700c0
#define CURBBASE 0x700c4
#define CURBPOS 0x700c8
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+#define DISPPLANE_TILED (1<<10)
#define DSPAADDR 0x70184
#define DSPASTRIDE 0x70188
#define DSPAPOS 0x7018C /* reserved */
for (i = 0; i < 3; i++)
dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+ } else {
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ }
i915_save_vga(dev);
return 0;
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
return NULL;
}
-/* Try to find panel data */
static void
-parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
+ struct lvds_dvo_timing *dvo_timing)
+{
+ panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
+ dvo_timing->hactive_lo;
+ panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
+ ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
+ panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
+ dvo_timing->hsync_pulse_width;
+ panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
+ ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+
+ panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
+ dvo_timing->vactive_lo;
+ panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
+ dvo_timing->vsync_off;
+ panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
+ dvo_timing->vsync_pulse_width;
+ panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
+ ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
+ panel_fixed_mode->clock = dvo_timing->clock * 10;
+ panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+
+ /* Some VBTs have bogus h/vtotal values */
+ if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+ panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+ if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+ panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
+ drm_mode_set_name(panel_fixed_mode);
+}
+
+/* Try to find integrated panel data */
+static void
+parse_lfp_panel_data(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
{
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
DRM_MEM_DRIVER);
- panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
- dvo_timing->hactive_lo;
- panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
- ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
- panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
- dvo_timing->hsync_pulse_width;
- panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
- ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+ fill_detail_timing_data(panel_fixed_mode, dvo_timing);
- panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
- dvo_timing->vactive_lo;
- panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
- dvo_timing->vsync_off;
- panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
- dvo_timing->vsync_pulse_width;
- panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
- ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
- panel_fixed_mode->clock = dvo_timing->clock * 10;
- panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+ dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
- /* Some VBTs have bogus h/vtotal values */
- if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
- panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
- if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
- panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+ DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
+ drm_mode_debug_printmodeline(panel_fixed_mode);
- drm_mode_set_name(panel_fixed_mode);
+ return;
+}
+
+/* Try to find sdvo panel data */
+static void
+parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct bdb_sdvo_lvds_options *sdvo_lvds_options;
+ struct lvds_dvo_timing *dvo_timing;
+ struct drm_display_mode *panel_fixed_mode;
- dev_priv->vbt_mode = panel_fixed_mode;
+ dev_priv->sdvo_lvds_vbt_mode = NULL;
- DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
- drm_mode_debug_printmodeline(panel_fixed_mode);
+ sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
+ if (!sdvo_lvds_options)
+ return;
+
+ dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
+ if (!dvo_timing)
+ return;
+
+ panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
+ DRM_MEM_DRIVER);
+
+ if (!panel_fixed_mode)
+ return;
+
+ fill_detail_timing_data(panel_fixed_mode,
+ dvo_timing + sdvo_lvds_options->panel_type);
+
+ dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode;
return;
}
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
- parse_panel_data(dev_priv, bdb);
+ parse_lfp_panel_data(dev_priv, bdb);
+ parse_sdvo_panel_data(dev_priv, bdb);
pci_unmap_rom(pdev, bios);
struct vch_panel_data panels[16];
} __attribute__((packed));
+struct bdb_sdvo_lvds_options {
+ u8 panel_backlight;
+ u8 h40_set_panel_type;
+ u8 panel_type;
+ u8 ssc_clk_freq;
+ u16 als_low_trip;
+ u16 als_high_trip;
+ u8 sclalarcoeff_tab_row_num;
+ u8 sclalarcoeff_tab_row_size;
+ u8 coefficient[8];
+ u8 panel_misc_bits_1;
+ u8 panel_misc_bits_2;
+ u8 panel_misc_bits_3;
+ u8 panel_misc_bits_4;
+} __attribute__((packed));
+
+
bool intel_init_bios(struct drm_device *dev);
/*
hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
- if (IS_GM45(dev))
+ if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
return intel_ddc_probe(intel_output);
}
+static enum drm_connector_status
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+{
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pipe = intel_crtc->pipe;
+ uint32_t save_bclrpat;
+ uint32_t save_vtotal;
+ uint32_t vtotal, vactive;
+ uint32_t vsample;
+ uint32_t vblank, vblank_start, vblank_end;
+ uint32_t dsl;
+ uint32_t bclrpat_reg;
+ uint32_t vtotal_reg;
+ uint32_t vblank_reg;
+ uint32_t vsync_reg;
+ uint32_t pipeconf_reg;
+ uint32_t pipe_dsl_reg;
+ uint8_t st00;
+ enum drm_connector_status status;
+
+ if (pipe == 0) {
+ bclrpat_reg = BCLRPAT_A;
+ vtotal_reg = VTOTAL_A;
+ vblank_reg = VBLANK_A;
+ vsync_reg = VSYNC_A;
+ pipeconf_reg = PIPEACONF;
+ pipe_dsl_reg = PIPEADSL;
+ } else {
+ bclrpat_reg = BCLRPAT_B;
+ vtotal_reg = VTOTAL_B;
+ vblank_reg = VBLANK_B;
+ vsync_reg = VSYNC_B;
+ pipeconf_reg = PIPEBCONF;
+ pipe_dsl_reg = PIPEBDSL;
+ }
+
+ save_bclrpat = I915_READ(bclrpat_reg);
+ save_vtotal = I915_READ(vtotal_reg);
+ vblank = I915_READ(vblank_reg);
+
+ vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
+ vactive = (save_vtotal & 0x7ff) + 1;
+
+ vblank_start = (vblank & 0xfff) + 1;
+ vblank_end = ((vblank >> 16) & 0xfff) + 1;
+
+ /* Set the border color to purple. */
+ I915_WRITE(bclrpat_reg, 0x500050);
+
+ if (IS_I9XX(dev)) {
+ uint32_t pipeconf = I915_READ(pipeconf_reg);
+ I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+ /* Wait for next Vblank to substitue
+ * border color for Color info */
+ intel_wait_for_vblank(dev);
+ st00 = I915_READ8(VGA_MSR_WRITE);
+ status = ((st00 & (1 << 4)) != 0) ?
+ connector_status_connected :
+ connector_status_disconnected;
+
+ I915_WRITE(pipeconf_reg, pipeconf);
+ } else {
+ bool restore_vblank = false;
+ int count, detect;
+
+ /*
+ * If there isn't any border, add some.
+ * Yes, this will flicker
+ */
+ if (vblank_start <= vactive && vblank_end >= vtotal) {
+ uint32_t vsync = I915_READ(vsync_reg);
+ uint32_t vsync_start = (vsync & 0xffff) + 1;
+
+ vblank_start = vsync_start;
+ I915_WRITE(vblank_reg,
+ (vblank_start - 1) |
+ ((vblank_end - 1) << 16));
+ restore_vblank = true;
+ }
+ /* sample in the vertical border, selecting the larger one */
+ if (vblank_start - vactive >= vtotal - vblank_end)
+ vsample = (vblank_start + vactive) >> 1;
+ else
+ vsample = (vtotal + vblank_end) >> 1;
+
+ /*
+ * Wait for the border to be displayed
+ */
+ while (I915_READ(pipe_dsl_reg) >= vactive)
+ ;
+ while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
+ ;
+ /*
+ * Watch ST00 for an entire scanline
+ */
+ detect = 0;
+ count = 0;
+ do {
+ count++;
+ /* Read the ST00 VGA status register */
+ st00 = I915_READ8(VGA_MSR_WRITE);
+ if (st00 & (1 << 4))
+ detect++;
+ } while ((I915_READ(pipe_dsl_reg) == dsl));
+
+ /* restore vblank if necessary */
+ if (restore_vblank)
+ I915_WRITE(vblank_reg, vblank);
+ /*
+ * If more than 3/4 of the scanline detected a monitor,
+ * then it is assumed to be present. This works even on i830,
+ * where there isn't any way to force the border color across
+ * the screen
+ */
+ status = detect * 4 > count * 3 ?
+ connector_status_connected :
+ connector_status_disconnected;
+ }
+
+ /* Restore previous settings */
+ I915_WRITE(bclrpat_reg, save_bclrpat);
+
+ return status;
+}
+
static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_crtc *crtc;
+ int dpms_mode;
+ enum drm_connector_status status;
if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
if (intel_crt_detect_hotplug(connector))
if (intel_crt_detect_ddc(connector))
return connector_status_connected;
- /* TODO use load detect */
- return connector_status_unknown;
+ /* for pre-945g platforms use load detect */
+ if (encoder->crtc && encoder->crtc->enabled) {
+ status = intel_crt_load_detect(encoder->crtc, intel_output);
+ } else {
+ crtc = intel_get_load_detect_pipe(intel_output,
+ NULL, &dpms_mode);
+ if (crtc) {
+ status = intel_crt_load_detect(crtc, intel_output);
+ intel_release_load_detect_pipe(intel_output, dpms_mode);
+ } else
+ status = connector_status_unknown;
+ }
+
+ return status;
}
static void intel_crt_destroy(struct drm_connector *connector)
struct drm_property *property,
uint64_t value)
{
- struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
return 0;
}
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = intel_crt_destroy,
.p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
+ .find_pll = intel_find_best_PLL,
},
{ /* INTEL_LIMIT_IGD_LVDS */
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
/* IGD only supports single-channel mode. */
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
+ .find_pll = intel_find_best_PLL,
},
};
int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF);
int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
int ret;
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
+ if (IS_I965G(dev)) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ dspcntr |= DISPPLANE_TILED;
+ else
+ dspcntr &= ~DISPPLANE_TILED;
+ }
+
I915_WRITE(dspcntr_reg, dspcntr);
Start = obj_priv->gtt_offset;
I915_READ(dspbase);
I915_WRITE(dspsurf, Start);
I915_READ(dspsurf);
+ I915_WRITE(dsptileoff, (y << 16) | x);
} else {
I915_WRITE(dspbase, Start + Offset);
I915_READ(dspbase);
int pipe = intel_crtc->pipe;
uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
- uint32_t temp;
+ uint32_t temp = I915_READ(control);
size_t addr;
int ret;
/* if we want to turn off the cursor ignore width and height */
if (!handle) {
DRM_DEBUG("cursor off\n");
- temp = CURSOR_MODE_DISABLE;
+ if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+ temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ temp |= CURSOR_MODE_DISABLE;
+ } else {
+ temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+ }
addr = 0;
bo = NULL;
mutex_lock(&dev->struct_mutex);
addr = obj_priv->phys_obj->handle->busaddr;
}
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ if (!IS_I9XX(dev))
+ I915_WRITE(CURSIZE, (height << 12) | width);
+
+ /* Hooray for CUR*CNTR differences */
+ if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+ temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+ temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ temp |= (pipe << 28); /* Connect to correct pipe */
+ } else {
+ temp &= ~(CURSOR_FORMAT_MASK);
+ temp |= CURSOR_ENABLE;
+ temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
+ }
finish:
I915_WRITE(control, temp);
}
}
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+ struct drm_crtc *crtc = NULL;
+ int pipe = -1;
+
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
+ return -EINVAL;
+ }
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ if (crtc->base.id == pipe_from_crtc_id->crtc_id) {
+ pipe = intel_crtc->pipe;
+ break;
+ }
+ }
+
+ if (pipe == -1) {
+ DRM_ERROR("no such CRTC id\n");
+ return -EINVAL;
+ }
+
+ pipe_from_crtc_id->pipe = pipe;
+
+ return 0;
+}
+
struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
{
struct drm_crtc *crtc = NULL;
void intel_i2c_destroy(struct intel_i2c_chan *chan);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
-
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
extern void intel_crt_init(struct drm_device *dev);
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
extern void intel_wait_for_vblank(struct drm_device *dev);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
};
static const struct drm_connector_funcs intel_dvo_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_dvo_save,
.restore = intel_dvo_restore,
.detect = intel_dvo_detect,
static struct sysrq_key_op sysrq_intelfb_restore_op = {
.handler = intelfb_sysrq,
- .help_msg = "force fb",
- .action_msg = "force restore of fb console",
+ .help_msg = "force-fb(V)",
+ .action_msg = "Restore framebuffer console",
};
int intelfb_probe(struct drm_device *dev)
ret = intelfb_single_fb_probe(dev);
}
- register_sysrq_key('g', &sysrq_intelfb_restore_op);
+ register_sysrq_key('v', &sysrq_intelfb_restore_op);
return ret;
}
struct intel_hdmi_priv {
u32 sdvox_reg;
u32 save_SDVOX;
- int has_hdmi_sink;
+ bool has_hdmi_sink;
};
static void intel_hdmi_mode_set(struct drm_encoder *encoder,
return true;
}
+static void
+intel_hdmi_sink_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct edid *edid = NULL;
+
+ edid = drm_get_edid(&intel_output->base,
+ &intel_output->ddc_bus->adapter);
+ if (edid != NULL) {
+ hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ intel_output->base.display_info.raw_edid = NULL;
+ }
+}
+
static enum drm_connector_status
intel_hdmi_detect(struct drm_connector *connector)
{
temp = I915_READ(PORT_HOTPLUG_EN);
- I915_WRITE(PORT_HOTPLUG_EN,
- temp |
- HDMIB_HOTPLUG_INT_EN |
- HDMIC_HOTPLUG_INT_EN |
- HDMID_HOTPLUG_INT_EN);
+ switch (hdmi_priv->sdvox_reg) {
+ case SDVOB:
+ temp |= HDMIB_HOTPLUG_INT_EN;
+ break;
+ case SDVOC:
+ temp |= HDMIC_HOTPLUG_INT_EN;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ I915_WRITE(PORT_HOTPLUG_EN, temp);
POSTING_READ(PORT_HOTPLUG_EN);
return connector_status_unknown;
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+ if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
+ intel_hdmi_sink_detect(connector);
return connector_status_connected;
- else
+ } else
return connector_status_disconnected;
}
};
static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_hdmi_save,
.restore = intel_hdmi_restore,
.detect = intel_hdmi_detect,
#include "i915_drm.h"
#include "i915_drv.h"
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* When using bit bashing for I2C, this bit needs to be set to 1 */
+ if (!IS_IGD(dev))
+ return;
+ if (enable)
+ I915_WRITE(CG_2D_DIS,
+ I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE);
+ else
+ I915_WRITE(CG_2D_DIS,
+ I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+}
+
/*
* Intel GPIO access functions
*/
goto out_free;
/* JJJ: raise SCL and SDA? */
+ intel_i2c_quirk_set(dev, true);
set_data(chan, 1);
set_clock(chan, 1);
+ intel_i2c_quirk_set(dev, false);
udelay(20);
return chan;
struct drm_property *property,
uint64_t value)
{
- struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
return 0;
}
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_lvds_save,
.restore = intel_lvds_restore,
.detect = intel_lvds_detect,
.destroy = intel_lvds_enc_destroy,
};
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+ DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+ return 1;
+}
+
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id intel_no_lvds[] = {
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Apple Mac Mini (Core series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Apple Mac Mini (Core 2 series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "MSI IM-945GSE-A",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Dell Studio Hybrid",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+ },
+ },
+ /* FIXME: add a check for the Aopen Mini PC */
+
+ { } /* terminating entry */
+};
/**
* intel_lvds_init - setup LVDS connectors on this device
u32 lvds;
int pipe;
- /* Blacklist machines that we know falsely report LVDS. */
- /* FIXME: add a check for the Aopen Mini PC */
-
- /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
- if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
- dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
- DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+ /* Skip init on machines we know falsely report LVDS */
+ if (dmi_check_system(intel_no_lvds))
return;
- }
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output) {
}
/* Failed to get EDID, what about VBT? */
- if (dev_priv->vbt_mode) {
+ if (dev_priv->lfp_lvds_vbt_mode) {
mutex_lock(&dev->mode_config.mutex);
dev_priv->panel_fixed_mode =
- drm_mode_duplicate(dev, dev_priv->vbt_mode);
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
mutex_unlock(&dev->mode_config.mutex);
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
#include <linux/fb.h>
#include "drmP.h"
#include "intel_drv.h"
+#include "i915_drv.h"
/**
* intel_ddc_probe
}
};
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+
if (ret == 2)
return true;
struct edid *edid;
int ret = 0;
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
edid = drm_get_edid(&intel_output->base,
&intel_output->ddc_bus->adapter);
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
+ /**
+ * This is set if we detect output of sdvo device as LVDS.
+ */
+ bool is_lvds;
/**
* Returned SDTV resolutions allowed for the current format, if the
intel_sdvo_read_response(intel_output, &response, 2);
}
+static void
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct edid *edid = NULL;
+
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ edid = drm_get_edid(&intel_output->base,
+ &intel_output->ddc_bus->adapter);
+ if (edid != NULL) {
+ sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ intel_output->base.display_info.raw_edid = NULL;
+ }
+}
+
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
{
u8 response[2];
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
- if ((response[0] != 0) || (response[1] != 0))
+ if ((response[0] != 0) || (response[1] != 0)) {
+ intel_sdvo_hdmi_sink_detect(connector);
return connector_status_connected;
- else
+ } else
return connector_status_disconnected;
}
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
/* set the bus switch and get the modes */
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
intel_ddc_get_modes(intel_output);
#if 0
}
}
+static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+
+ /*
+ * Attempt to get the mode list from DDC.
+ * Assume that the preferred modes are
+ * arranged in priority order.
+ */
+ /* set the bus switch and get the modes */
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ intel_ddc_get_modes(intel_output);
+ if (list_empty(&connector->probed_modes) == false)
+ return;
+
+ /* Fetch modes from VBT */
+ if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
+ struct drm_display_mode *newmode;
+ newmode = drm_mode_duplicate(connector->dev,
+ dev_priv->sdvo_lvds_vbt_mode);
+ if (newmode != NULL) {
+ /* Guarantee the mode is preferred */
+ newmode->type = (DRM_MODE_TYPE_PREFERRED |
+ DRM_MODE_TYPE_DRIVER);
+ drm_mode_probed_add(connector, newmode);
+ }
+ }
+}
+
static int intel_sdvo_get_modes(struct drm_connector *connector)
{
struct intel_output *output = to_intel_output(connector);
if (sdvo_priv->is_tv)
intel_sdvo_get_tv_modes(connector);
+ else if (sdvo_priv->is_lvds == true)
+ intel_sdvo_get_lvds_modes(connector);
else
intel_sdvo_get_ddc_modes(connector);
if (intel_output->i2c_bus)
intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_output->ddc_bus)
+ intel_i2c_destroy(intel_output->ddc_bus);
+
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(intel_output);
};
static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_sdvo_save,
.restore = intel_sdvo_restore,
.detect = intel_sdvo_detect,
return true;
}
+static struct intel_output *
+intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan)
+{
+ struct drm_device *dev = chan->drm_dev;
+ struct drm_connector *connector;
+ struct intel_output *intel_output = NULL;
+
+ list_for_each_entry(connector,
+ &dev->mode_config.connector_list, head) {
+ if (to_intel_output(connector)->ddc_bus == chan) {
+ intel_output = to_intel_output(connector);
+ break;
+ }
+ }
+ return intel_output;
+}
+
+static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct intel_output *intel_output;
+ struct intel_sdvo_priv *sdvo_priv;
+ struct i2c_algo_bit_data *algo_data;
+ struct i2c_algorithm *algo;
+
+ algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
+ intel_output =
+ intel_sdvo_chan_to_intel_output(
+ (struct intel_i2c_chan *)(algo_data->data));
+ if (intel_output == NULL)
+ return -EINVAL;
+
+ sdvo_priv = intel_output->dev_priv;
+ algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ return algo->master_xfer(i2c_adap, msgs, num);
+}
+
+static struct i2c_algorithm intel_sdvo_i2c_bit_algo = {
+ .master_xfer = intel_sdvo_master_xfer,
+};
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
struct intel_i2c_chan *i2cbus = NULL;
+ struct intel_i2c_chan *ddcbus = NULL;
int connector_type;
u8 ch[0x40];
int i;
return false;
}
- connector = &intel_output->base;
-
- drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
- DRM_MODE_CONNECTOR_Unknown);
- drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
intel_output->type = INTEL_OUTPUT_SDVO;
- connector->interlace_allowed = 0;
- connector->doublescan_allowed = 0;
-
/* setup the DDC bus. */
if (output_device == SDVOB)
i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
if (!i2cbus)
- goto err_connector;
+ goto err_inteloutput;
sdvo_priv->i2c_bus = i2cbus;
intel_output->i2c_bus = i2cbus;
intel_output->dev_priv = sdvo_priv;
-
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
}
}
+ /* setup the DDC bus. */
+ if (output_device == SDVOB)
+ ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+ else
+ ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+
+ if (ddcbus == NULL)
+ goto err_i2c;
+
+ intel_sdvo_i2c_bit_algo.functionality =
+ intel_output->i2c_bus->adapter.algo->functionality;
+ ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
+ intel_output->ddc_bus = ddcbus;
+
+ /* In defaut case sdvo lvds is false */
+ sdvo_priv->is_lvds = false;
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
if (sdvo_priv->caps.output_flags &
else
sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_TMDS;
connector_type = DRM_MODE_CONNECTOR_DVID;
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_TVDAC;
connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_DAC;
connector_type = DRM_MODE_CONNECTOR_VGA;
}
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_DAC;
connector_type = DRM_MODE_CONNECTOR_VGA;
}
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_LVDS;
connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
}
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_LVDS;
connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
}
else
{
goto err_i2c;
}
+ connector = &intel_output->base;
+ drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
+ connector_type);
+ drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+ connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+
drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
- connector->connector_type = connector_type;
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
drm_sysfs_connector_add(connector);
sdvo_priv->caps.output_flags &
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
- intel_output->ddc_bus = i2cbus;
-
return true;
err_i2c:
+ if (ddcbus != NULL)
+ intel_i2c_destroy(intel_output->ddc_bus);
intel_i2c_destroy(intel_output->i2c_bus);
-err_connector:
- drm_connector_cleanup(connector);
+err_inteloutput:
kfree(intel_output);
return false;
};
static const struct drm_connector_funcs intel_tv_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_tv_save,
.restore = intel_tv_restore,
.detect = intel_tv_detect,
#if __OS_HAS_AGP
if (!dev_priv->is_pci) {
- drm_core_ioremap(dev_priv->cce_ring, dev);
- drm_core_ioremap(dev_priv->ring_rptr, dev);
- drm_core_ioremap(dev->agp_buffer_map, dev);
+ drm_core_ioremap_wc(dev_priv->cce_ring, dev);
+ drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
+ drm_core_ioremap_wc(dev->agp_buffer_map, dev);
if (!dev_priv->cce_ring->handle ||
!dev_priv->ring_rptr->handle ||
!dev->agp_buffer_map->handle) {
/* check if the ring is padded out to 16-dword alignment */
- tail_aligned = dev_priv->ring.tail & 0xf;
+ tail_aligned = dev_priv->ring.tail & (RADEON_RING_ALIGN-1);
if (tail_aligned) {
- int num_p2 = 16 - tail_aligned;
+ int num_p2 = RADEON_RING_ALIGN - tail_aligned;
ring = dev_priv->ring.start;
/* pad with some CP_PACKET2 */
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
+ * 1.30- Add support for occlusion queries
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 29
+#define DRIVER_MINOR 30
#define DRIVER_PATCHLEVEL 0
/*
#define RING_LOCALS int write, _nr, _align_nr; unsigned int mask; u32 *ring;
+#define RADEON_RING_ALIGN 16
+
#define BEGIN_RING( n ) do { \
if ( RADEON_VERBOSE ) { \
DRM_INFO( "BEGIN_RING( %d )\n", (n)); \
} \
- _align_nr = (n + 0xf) & ~0xf; \
+ _align_nr = RADEON_RING_ALIGN - ((dev_priv->ring.tail + n) & (RADEON_RING_ALIGN-1)); \
+ _align_nr += n; \
if (dev_priv->ring.space <= (_align_nr * sizeof(u32))) { \
COMMIT_RING(); \
radeon_wait_ring( dev_priv, _align_nr * sizeof(u32)); \
{
int count = 10000000;
- while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--);
+ while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count)
+ ;
- while (count-- && (VIA_READ(VIA_REG_STATUS) &
+ while (count && (VIA_READ(VIA_REG_STATUS) &
(VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY |
- VIA_3D_ENG_BUSY))) ;
+ VIA_3D_ENG_BUSY)))
+ --count;
return count;
}
switch (d_siz->func) {
case VIA_CMDBUF_SPACE:
while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
- && count--) {
+ && --count) {
if (!d_siz->wait) {
break;
}
break;
case VIA_CMDBUF_LAG:
while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
- && count--) {
+ && --count) {
if (!d_siz->wait) {
break;
}
if (fnmode) {
int do_translate;
- trans = apple_find_translation((hid->product < 0x220 ||
+ trans = apple_find_translation((hid->product < 0x21d ||
hid->product >= 0x300) ?
powerbook_fn_keys : apple_fn_keys,
usage->code);
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
struct hid_input *hidinput;
int i;
+ if (!(hid->claimed & HID_CLAIMED_INPUT))
+ return 0;
+
list_for_each_entry(hidinput, &hid->inputs, list) {
for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++)
if (hidinput->input->key[i])
#define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
+#define USB_VENDOR_ID_CH 0x068e
+#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
+#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
+
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
+#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299
#define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2),
.driver_data = LG_FF },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
+ .driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
{ }
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
- if (!hid->name)
- return 0;
+ if (!hid->name) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
int len;
- if (!hid->phys)
- return 0;
+ if (!hid->phys) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
spin_lock_irq(&usbhid->lock);
if (!--hid->open) {
spin_unlock_irq(&usbhid->lock);
+ hid_cancel_delayed_stuff(usbhid);
usb_kill_urb(usbhid->urbin);
- flush_scheduled_work();
usbhid->intf->needs_remote_wakeup = 0;
} else {
spin_unlock_irq(&usbhid->lock);
goto err;
}
- hid->quirks = quirks;
+ hid->quirks |= quirks;
return 0;
err:
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_SHT15
+ tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for the Sensiron SHT10, SHT11,
+ SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht15.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
return 0;
}
+#ifdef DEBUG
static char const *atk_sensor_type(union acpi_object *flags)
{
u64 type = flags->integer.value & ATK_TYPE_MASK;
return what;
}
+#endif
static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
{
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/freezer.h>
-#include <linux/version.h>
#include <linux/uaccess.h>
#include <linux/leds.h>
#include <acpi/acpi_drivers.h>
.name = "lm78",
},
.probe = lm78_isa_probe,
- .remove = lm78_isa_remove,
+ .remove = __devexit_p(lm78_isa_remove),
};
--- /dev/null
+/*
+ * sht15.c - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently ignoring checksum on readings.
+ * Default resolution only (14bit temp, 12bit humidity)
+ * Ignoring battery status.
+ * Heater not enabled.
+ * Timings are all conservative.
+ *
+ * Data sheet available (1/2009) at
+ * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+ *
+ * Regulator supply name = vcc
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/sht15.h>
+#include <linux/regulator/consumer.h>
+#include <asm/atomic.h>
+
+#define SHT15_MEASURE_TEMP 3
+#define SHT15_MEASURE_RH 5
+
+#define SHT15_READING_NOTHING 0
+#define SHT15_READING_TEMP 1
+#define SHT15_READING_HUMID 2
+
+/* Min timings in nsecs */
+#define SHT15_TSCKL 100 /* clock low */
+#define SHT15_TSCKH 100 /* clock high */
+#define SHT15_TSU 150 /* data setup time */
+
+/**
+ * struct sht15_temppair - elements of voltage dependant temp calc
+ * @vdd: supply voltage in microvolts
+ * @d1: see data sheet
+ */
+struct sht15_temppair {
+ int vdd; /* microvolts */
+ int d1;
+};
+
+/* Table 9 from data sheet - relates temperature calculation
+ * to supply voltage.
+ */
+static const struct sht15_temppair temppoints[] = {
+ { 2500000, -39400 },
+ { 3000000, -39600 },
+ { 3500000, -39700 },
+ { 4000000, -39800 },
+ { 5000000, -40100 },
+};
+
+/**
+ * struct sht15_data - device instance specific data
+ * @pdata: platform data (gpio's etc)
+ * @read_work: bh of interrupt handler
+ * @wait_queue: wait queue for getting values from device
+ * @val_temp: last temperature value read from device
+ * @val_humid: last humidity value read from device
+ * @flag: status flag used to identify what the last request was
+ * @valid: are the current stored values valid (start condition)
+ * @last_updat: time of last update
+ * @read_lock: mutex to ensure only one read in progress
+ * at a time.
+ * @dev: associate device structure
+ * @hwmon_dev: device associated with hwmon subsystem
+ * @reg: associated regulator (if specified)
+ * @nb: notifier block to handle notifications of voltage changes
+ * @supply_uV: local copy of supply voltage used to allow
+ * use of regulator consumer if available
+ * @supply_uV_valid: indicates that an updated value has not yet
+ * been obtained from the regulator and so any calculations
+ * based upon it will be invalid.
+ * @update_supply_work: work struct that is used to update the supply_uV
+ * @interrupt_handled: flag used to indicate a hander has been scheduled
+ */
+struct sht15_data {
+ struct sht15_platform_data *pdata;
+ struct work_struct read_work;
+ wait_queue_head_t wait_queue;
+ uint16_t val_temp;
+ uint16_t val_humid;
+ u8 flag;
+ u8 valid;
+ unsigned long last_updat;
+ struct mutex read_lock;
+ struct device *dev;
+ struct device *hwmon_dev;
+ struct regulator *reg;
+ struct notifier_block nb;
+ int supply_uV;
+ int supply_uV_valid;
+ struct work_struct update_supply_work;
+ atomic_t interrupt_handled;
+};
+
+/**
+ * sht15_connection_reset() - reset the comms interface
+ * @data: sht15 specific data
+ *
+ * This implements section 3.4 of the data sheet
+ */
+static void sht15_connection_reset(struct sht15_data *data)
+{
+ int i;
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ for (i = 0; i < 9; ++i) {
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ }
+}
+/**
+ * sht15_send_bit() - send an individual bit to the device
+ * @data: device state data
+ * @val: value of bit to be sent
+ **/
+static inline void sht15_send_bit(struct sht15_data *data, int val)
+{
+
+ gpio_set_value(data->pdata->gpio_data, val);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL); /* clock low time */
+}
+
+/**
+ * sht15_transmission_start() - specific sequence for new transmission
+ *
+ * @data: device state data
+ * Timings for this are not documented on the data sheet, so very
+ * conservative ones used in implementation. This implements
+ * figure 12 on the data sheet.
+ **/
+static void sht15_transmission_start(struct sht15_data *data)
+{
+ /* ensure data is high and output */
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+/**
+ * sht15_send_byte() - send a single byte to the device
+ * @data: device state
+ * @byte: value to be sent
+ **/
+static void sht15_send_byte(struct sht15_data *data, u8 byte)
+{
+ int i;
+ for (i = 0; i < 8; i++) {
+ sht15_send_bit(data, !!(byte & 0x80));
+ byte <<= 1;
+ }
+}
+/**
+ * sht15_wait_for_response() - checks for ack from device
+ * @data: device state
+ **/
+static int sht15_wait_for_response(struct sht15_data *data)
+{
+ gpio_direction_input(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ dev_err(data->dev, "Command not acknowledged\n");
+ sht15_connection_reset(data);
+ return -EIO;
+ }
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ return 0;
+}
+
+/**
+ * sht15_send_cmd() - Sends a command to the device.
+ * @data: device state
+ * @cmd: command byte to be sent
+ *
+ * On entry, sck is output low, data is output pull high
+ * and the interrupt disabled.
+ **/
+static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
+{
+ int ret = 0;
+ sht15_transmission_start(data);
+ sht15_send_byte(data, cmd);
+ ret = sht15_wait_for_response(data);
+ return ret;
+}
+/**
+ * sht15_update_single_val() - get a new value from device
+ * @data: device instance specific data
+ * @command: command sent to request value
+ * @timeout_msecs: timeout after which comms are assumed
+ * to have failed are reset.
+ **/
+static inline int sht15_update_single_val(struct sht15_data *data,
+ int command,
+ int timeout_msecs)
+{
+ int ret;
+ ret = sht15_send_cmd(data, command);
+ if (ret)
+ return ret;
+
+ gpio_direction_input(data->pdata->gpio_data);
+ atomic_set(&data->interrupt_handled, 0);
+
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ if (gpio_get_value(data->pdata->gpio_data) == 0) {
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ /* Only relevant if the interrupt hasn't occured. */
+ if (!atomic_read(&data->interrupt_handled))
+ schedule_work(&data->read_work);
+ }
+ ret = wait_event_timeout(data->wait_queue,
+ (data->flag == SHT15_READING_NOTHING),
+ msecs_to_jiffies(timeout_msecs));
+ if (ret == 0) {/* timeout occurred */
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+ sht15_connection_reset(data);
+ return -ETIME;
+ }
+ return 0;
+}
+
+/**
+ * sht15_update_vals() - get updated readings from device if too old
+ * @data: device state
+ **/
+static int sht15_update_vals(struct sht15_data *data)
+{
+ int ret = 0;
+ int timeout = HZ;
+
+ mutex_lock(&data->read_lock);
+ if (time_after(jiffies, data->last_updat + timeout)
+ || !data->valid) {
+ data->flag = SHT15_READING_HUMID;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160);
+ if (ret)
+ goto error_ret;
+ data->flag = SHT15_READING_TEMP;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400);
+ if (ret)
+ goto error_ret;
+ data->valid = 1;
+ data->last_updat = jiffies;
+ }
+error_ret:
+ mutex_unlock(&data->read_lock);
+
+ return ret;
+}
+
+/**
+ * sht15_calc_temp() - convert the raw reading to a temperature
+ * @data: device state
+ *
+ * As per section 4.3 of the data sheet.
+ **/
+static inline int sht15_calc_temp(struct sht15_data *data)
+{
+ int d1 = 0;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+ /* Find pointer to interpolate */
+ if (data->supply_uV > temppoints[i - 1].vdd) {
+ d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+ * (temppoints[i].d1 - temppoints[i - 1].d1)
+ / (temppoints[i].vdd - temppoints[i - 1].vdd)
+ + temppoints[i - 1].d1;
+ break;
+ }
+
+ return data->val_temp*10 + d1;
+}
+
+/**
+ * sht15_calc_humid() - using last temperature convert raw to humid
+ * @data: device state
+ *
+ * This is the temperature compensated version as per section 4.2 of
+ * the data sheet.
+ **/
+static inline int sht15_calc_humid(struct sht15_data *data)
+{
+ int RHlinear; /* milli percent */
+ int temp = sht15_calc_temp(data);
+
+ const int c1 = -4;
+ const int c2 = 40500; /* x 10 ^ -6 */
+ const int c3 = 2800; /* x10 ^ -9 */
+
+ RHlinear = c1*1000
+ + c2 * data->val_humid/1000
+ + (data->val_humid * data->val_humid * c3)/1000000;
+ return (temp - 25000) * (10000 + 800 * data->val_humid)
+ / 1000000 + RHlinear;
+}
+
+static ssize_t sht15_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ /* Technically no need to read humidity as well */
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n",
+ sht15_calc_temp(data));
+}
+
+static ssize_t sht15_show_humidity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
+
+};
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ return sprintf(buf, "%s\n", pdev->name);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input,
+ S_IRUGO, sht15_show_temp,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input,
+ S_IRUGO, sht15_show_humidity,
+ NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct attribute *sht15_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_humidity1_input.dev_attr.attr,
+ &dev_attr_name.attr,
+ NULL,
+};
+
+static const struct attribute_group sht15_attr_group = {
+ .attrs = sht15_attrs,
+};
+
+static irqreturn_t sht15_interrupt_fired(int irq, void *d)
+{
+ struct sht15_data *data = d;
+ /* First disable the interrupt */
+ disable_irq_nosync(irq);
+ atomic_inc(&data->interrupt_handled);
+ /* Then schedule a reading work struct */
+ if (data->flag != SHT15_READING_NOTHING)
+ schedule_work(&data->read_work);
+ return IRQ_HANDLED;
+}
+
+/* Each byte of data is acknowledged by pulling the data line
+ * low for one clock pulse.
+ */
+static void sht15_ack(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_data, 1);
+
+ gpio_direction_input(data->pdata->gpio_data);
+}
+/**
+ * sht15_end_transmission() - notify device of end of transmission
+ * @data: device state
+ *
+ * This is basically a NAK. (single clock pulse, data high)
+ **/
+static void sht15_end_transmission(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+
+static void sht15_bh_read_data(struct work_struct *work_s)
+{
+ int i;
+ uint16_t val = 0;
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ read_work);
+ /* Firstly, verify the line is low */
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ /* If not, then start the interrupt again - care
+ here as could have gone low in meantime so verify
+ it hasn't!
+ */
+ atomic_set(&data->interrupt_handled, 0);
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ /* If still not occured or another handler has been scheduled */
+ if (gpio_get_value(data->pdata->gpio_data)
+ || atomic_read(&data->interrupt_handled))
+ return;
+ }
+ /* Read the data back from the device */
+ for (i = 0; i < 16; ++i) {
+ val <<= 1;
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ val |= !!gpio_get_value(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ if (i == 7)
+ sht15_ack(data);
+ }
+ /* Tell the device we are done */
+ sht15_end_transmission(data);
+
+ switch (data->flag) {
+ case SHT15_READING_TEMP:
+ data->val_temp = val;
+ break;
+ case SHT15_READING_HUMID:
+ data->val_humid = val;
+ break;
+ }
+
+ data->flag = SHT15_READING_NOTHING;
+ wake_up(&data->wait_queue);
+}
+
+static void sht15_update_voltage(struct work_struct *work_s)
+{
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ update_supply_work);
+ data->supply_uV = regulator_get_voltage(data->reg);
+}
+
+/**
+ * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
+ * @nb: associated notification structure
+ * @event: voltage regulator state change event code
+ * @ignored: function parameter - ignored here
+ *
+ * Note that as the notification code holds the regulator lock, we have
+ * to schedule an update of the supply voltage rather than getting it directly.
+ **/
+static int sht15_invalidate_voltage(struct notifier_block *nb,
+ unsigned long event,
+ void *ignored)
+{
+ struct sht15_data *data = container_of(nb, struct sht15_data, nb);
+
+ if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
+ data->supply_uV_valid = false;
+ schedule_work(&data->update_supply_work);
+
+ return NOTIFY_OK;
+}
+
+static int __devinit sht15_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+ if (!data) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "kzalloc failed");
+ goto error_ret;
+ }
+
+ INIT_WORK(&data->read_work, sht15_bh_read_data);
+ INIT_WORK(&data->update_supply_work, sht15_update_voltage);
+ platform_set_drvdata(pdev, data);
+ mutex_init(&data->read_lock);
+ data->dev = &pdev->dev;
+ init_waitqueue_head(&data->wait_queue);
+
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data supplied");
+ goto err_free_data;
+ }
+ data->pdata = pdev->dev.platform_data;
+ data->supply_uV = data->pdata->supply_mv*1000;
+
+/* If a regulator is available, query what the supply voltage actually is!*/
+ data->reg = regulator_get(data->dev, "vcc");
+ if (!IS_ERR(data->reg)) {
+ data->supply_uV = regulator_get_voltage(data->reg);
+ regulator_enable(data->reg);
+ /* setup a notifier block to update this if another device
+ * causes the voltage to change */
+ data->nb.notifier_call = &sht15_invalidate_voltage;
+ ret = regulator_register_notifier(data->reg, &data->nb);
+ }
+/* Try requesting the GPIOs */
+ ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_free_data;
+ }
+ gpio_direction_output(data->pdata->gpio_sck, 0);
+ ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_release_gpio_sck;
+ }
+ ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "sysfs create failed");
+ goto err_free_data;
+ }
+
+ ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
+ sht15_interrupt_fired,
+ IRQF_TRIGGER_FALLING,
+ "sht15 data",
+ data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get irq for data line");
+ goto err_release_gpio_data;
+ }
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ sht15_connection_reset(data);
+ sht15_send_cmd(data, 0x1E);
+
+ data->hwmon_dev = hwmon_device_register(data->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto err_release_gpio_data;
+ }
+ return 0;
+
+err_release_gpio_data:
+ gpio_free(data->pdata->gpio_data);
+err_release_gpio_sck:
+ gpio_free(data->pdata->gpio_sck);
+err_free_data:
+ kfree(data);
+error_ret:
+
+ return ret;
+}
+
+static int __devexit sht15_remove(struct platform_device *pdev)
+{
+ struct sht15_data *data = platform_get_drvdata(pdev);
+
+ /* Make sure any reads from the device are done and
+ * prevent new ones beginnning */
+ mutex_lock(&data->read_lock);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (!IS_ERR(data->reg)) {
+ regulator_unregister_notifier(data->reg, &data->nb);
+ regulator_disable(data->reg);
+ regulator_put(data->reg);
+ }
+
+ free_irq(gpio_to_irq(data->pdata->gpio_data), data);
+ gpio_free(data->pdata->gpio_data);
+ gpio_free(data->pdata->gpio_sck);
+ mutex_unlock(&data->read_lock);
+ kfree(data);
+ return 0;
+}
+
+
+static struct platform_driver sht_drivers[] = {
+ {
+ .driver = {
+ .name = "sht10",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht11",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht15",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht71",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht75",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ },
+};
+
+
+static int __init sht15_init(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
+ ret = platform_driver_register(&sht_drivers[i]);
+ if (ret)
+ goto error_unreg;
+ }
+
+ return 0;
+
+error_unreg:
+ while (--i >= 0)
+ platform_driver_unregister(&sht_drivers[i]);
+
+ return ret;
+}
+module_init(sht15_init);
+
+static void __exit sht15_exit(void)
+{
+ int i;
+ for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
+ platform_driver_unregister(&sht_drivers[i]);
+}
+module_exit(sht15_exit);
+
+MODULE_LICENSE("GPL");
data->pwm[i] =
w83781d_read_value(data,
W83781D_REG_PWM[i]);
- if ((data->type != w83782d || !client->driver)
+ /* Only W83782D on SMBus has PWM3 and PWM4 */
+ if ((data->type != w83782d || !client)
&& i == 1)
break;
}
* chips may hold it low ("clock stretching") while they
* are processing data internally.
*/
- if (time_after_eq(jiffies, start + adap->timeout))
+ if (time_after(jiffies, start + adap->timeout))
return -ETIMEDOUT;
cond_resched();
}
int completed = 1;
unsigned long timeout = jiffies + i2c_adap->timeout;
- while (pca_status(adap) != 0xf8) {
+ while ((state = pca_status(adap)) != 0xf8) {
if (time_before(jiffies, timeout)) {
msleep(10);
} else {
case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after data byte\n");
+ pca_stop(adap);
goto out;
case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
DEB2("Arbitration lost\n");
+ /*
+ * The PCA9564 data sheet (2006-09-01) says "A
+ * START condition will be transmitted when the
+ * bus becomes free (STOP or SCL and SDA high)"
+ * when the STA bit is set (p. 11).
+ *
+ * In case this won't work, try pca_reset()
+ * instead.
+ */
+ pca_start(adap);
goto out;
case 0x58: /* Data byte has been received; NOT ACK has been returned */
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
depends on PCI
config I2C_VOODOO3
- tristate "Voodoo 3"
+ tristate "Voodoo 3 (DEPRECATED)"
depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
- Voodoo 3 I2C interface.
+ Voodoo 3 I2C interface. This driver is deprecated and you should
+ use the tdfxfb driver instead, which additionally provides
+ framebuffer support.
This driver can also be built as a module. If so, the module
will be called i2c-voodoo3.
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
(timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
goto abort;
}
} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Completion timeout!\n");
goto abort;
}
rbdf = cpm->rbase;
for (i = 0; i < CPM_MAXBD; i++) {
- cpm->rxbuf[i] = dma_alloc_coherent(
- NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+ cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
+ CPM_MAX_READ + 1,
+ &cpm->rxdma[i], GFP_KERNEL);
if (!cpm->rxbuf[i]) {
ret = -ENOMEM;
goto out_muram;
}
out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
- cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
- NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+ cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
if (!cpm->txbuf[i]) {
ret = -ENOMEM;
goto out_muram;
out_muram:
for (i = 0; i < CPM_MAXBD; i++) {
if (cpm->rxbuf[i])
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->rxbuf[i], cpm->rxdma[i]);
if (cpm->txbuf[i])
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->txbuf[i], cpm->txdma[i]);
}
cpm_muram_free(cpm->dp_addr);
/* Free all memory */
for (i = 0; i < CPM_MAXBD; i++) {
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->rxbuf[i], cpm->rxdma[i]);
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->txbuf[i], cpm->txdma[i]);
}
status = inb_p(SMBHSTSTS);
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
} while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT)
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
- }
+
outb_p(status, SMBHSTSTS);
}
while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
return 0;
}
-#ifdef CONFIG_PPC_52xx
+#ifdef CONFIG_PPC_MPC52xx
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
{
- const struct mpc52xx_i2c_divider *div = NULL;
+ const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
u32 divider;
int i;
* We want to choose an FDR/DFSR that generates an I2C bus speed that
* is equal to or lower than the requested speed.
*/
- for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
div = &mpc_i2c_dividers_52xx[i];
/* Old MPC5200 rev A CPUs do not support the high bits */
if (div->fdr & 0xc0 && pvr == 0x80822011)
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x3f; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
- dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
-#else /* !CONFIG_PPC_52xx */
+#else /* !CONFIG_PPC_MPC52xx */
static void mpc_i2c_setclock_52xx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
}
-#endif /* CONFIG_PPC_52xx*/
+#endif /* CONFIG_PPC_MPC52xx*/
#ifdef CONFIG_FSL_SOC
static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x1031; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
- dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
- clock, fdr >> 8, fdr & 0xff);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+ clock, fdr >> 8, fdr & 0xff);
}
#else /* !CONFIG_FSL_SOC */
temp = inb_p(NVIDIA_SMB_STS);
} while ((!temp) && (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
if (smbus->can_abort)
nforce2_abort(adap);
show_state(i2c);
}
- if (timeout <= 0)
+ if (timeout < 0)
show_state(i2c);
- return timeout <= 0 ? I2C_RETRY : 0;
+ return timeout < 0 ? I2C_RETRY : 0;
}
static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
show_state(i2c);
}
- if (timeout <= 0) {
+ if (timeout < 0) {
show_state(i2c);
dev_err(&i2c->adap.dev,
"i2c_pxa: timeout waiting for bus free\n");
} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
result = -ETIMEDOUT;
}
/* new style driver methods can't mix with legacy ones */
if (is_newstyle_driver(driver)) {
- if (driver->attach_adapter || driver->detach_adapter
- || driver->detach_client) {
+ if (driver->detach_adapter || driver->detach_client) {
printk(KERN_WARNING
"i2c-core: driver [%s] is confused\n",
driver->driver.name);
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/clk.h>
leave_16bit(chipselect, mode);
}
-static u8 ide_mm_inb(unsigned long port)
-{
- return readb((void __iomem *) port);
-}
-
-static void ide_mm_outb(u8 value, unsigned long port)
-{
- writeb(value, (void __iomem *) port);
-}
-
-static void at91_ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
- if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
- ide_mm_outb(tf->feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
- ide_mm_outb(tf->nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
- ide_mm_outb(tf->lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
- ide_mm_outb(tf->lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
- ide_mm_outb(tf->lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
- ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
-}
-
-static void at91_ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
-
- /* be sure we're looking at the low order bits */
- ide_mm_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
- tf->error = ide_mm_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = ide_mm_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = ide_mm_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = ide_mm_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = ide_mm_inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = ide_mm_inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- ide_mm_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = ide_mm_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr);
- }
-}
-
static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
struct ide_timing *timing;
.write_devctl = ide_write_devctl,
.dev_select = ide_dev_select,
- .tf_load = at91_ide_tf_load,
- .tf_read = at91_ide_tf_read,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
.input_data = at91_ide_input_data,
.output_data = at91_ide_output_data,
.tp_ops = &at91_ide_tp_ops,
.host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
- .pio_mask = ATA_PIO5,
+ .pio_mask = ATA_PIO6,
};
/*
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
+ .dma_sff_read_status = ide_dma_sff_read_status,
};
static const struct ide_port_info cs5536_info = {
#include <asm/atarihw.h>
#include <asm/atariints.h>
#include <asm/atari_stdma.h>
+#include <asm/ide.h>
#define DRV_NAME "falconide"
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS))
- return insw(data_addr, buf, (len + 1) / 2);
+ if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
+ __ide_mm_insw(data_addr, buf, (len + 1) / 2);
+ return;
+ }
raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS))
- return outsw(data_addr, buf, (len + 1) / 2);
+ if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
+ __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
+ return;
+ }
raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
* Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2008 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
* the register setting lists into the table indexed by the clock selected
* - set the correct hwif->ultra_mask for each individual chip
* - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
+ * - stop resetting HPT370's state machine before each DMA transfer as that has
+ * caused more harm than good
* Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
*/
#define DRV_NAME "hpt366"
/* various tuning parameters */
-#define HPT_RESET_STATE_ENGINE
+#undef HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
static const char *quirk_drives[] = {
/* get DMA command mode */
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
/* stop DMA */
- outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
hpt370_clear_engine(drive);
}
ide_hwif_t *hwif = drive->hwif;
u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01) {
+ if (dma_stat & ATA_DMA_ACTIVE) {
/* wait a little */
udelay(20);
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01)
+ if (dma_stat & ATA_DMA_ACTIVE)
hpt370_irq_timeout(drive);
}
return ide_dma_end(drive);
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
/* return 1 if INTR asserted */
- if (dma_stat & 4)
+ if (dma_stat & ATA_DMA_INTR)
return 1;
return 0;
struct ide_host *host;
unsigned int sel = 0;
int ret;
- hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
+ hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL };
struct ide_port_info d = icside_v6_port_info;
ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
/* convert GTF to taskfile */
memset(&cmd, 0, sizeof(cmd));
- memcpy(&cmd.tf_array[7], gtf, REGS_PER_GTF);
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ memcpy(&cmd.tf.feature, gtf, REGS_PER_GTF);
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
err = ide_no_data_taskfile(drive, &cmd);
if (err) {
void ide_read_bcount_and_ireason(ide_drive_t *drive, u16 *bcount, u8 *ireason)
{
- struct ide_cmd cmd;
+ struct ide_taskfile tf;
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_IN_LBAH | IDE_TFLAG_IN_LBAM |
- IDE_TFLAG_IN_NSECT;
+ drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT |
+ IDE_VALID_LBAM | IDE_VALID_LBAH);
- drive->hwif->tp_ops->tf_read(drive, &cmd);
-
- *bcount = (cmd.tf.lbah << 8) | cmd.tf.lbam;
- *ireason = cmd.tf.nsect & 3;
+ *bcount = (tf.lbah << 8) | tf.lbam;
+ *ireason = tf.nsect & 3;
}
EXPORT_SYMBOL_GPL(ide_read_bcount_and_ireason);
return ide_started;
}
-static void ide_init_packet_cmd(struct ide_cmd *cmd, u32 tf_flags,
+static void ide_init_packet_cmd(struct ide_cmd *cmd, u8 valid_tf,
u16 bcount, u8 dma)
{
- cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO;
- cmd->tf_flags |= IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM |
- IDE_TFLAG_OUT_FEATURE | tf_flags;
+ cmd->protocol = dma ? ATAPI_PROT_DMA : ATAPI_PROT_PIO;
+ cmd->valid.out.tf = IDE_VALID_LBAH | IDE_VALID_LBAM |
+ IDE_VALID_FEATURE | valid_tf;
cmd->tf.command = ATA_CMD_PACKET;
cmd->tf.feature = dma; /* Use PIO/DMA */
cmd->tf.lbam = bcount & 0xff;
static u8 ide_read_ireason(ide_drive_t *drive)
{
- struct ide_cmd cmd;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_IN_NSECT;
+ struct ide_taskfile tf;
- drive->hwif->tp_ops->tf_read(drive, &cmd);
+ drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_NSECT);
- return cmd.tf.nsect & 3;
+ return tf.nsect & 3;
}
static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
ide_expiry_t *expiry = NULL;
struct request *rq = hwif->rq;
unsigned int timeout;
- u32 tf_flags;
u16 bcount;
+ u8 valid_tf;
u8 drq_int = !!(drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT);
if (dev_is_idecd(drive)) {
- tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ valid_tf = IDE_VALID_NSECT | IDE_VALID_LBAL;
bcount = ide_cd_get_xferlen(rq);
expiry = ide_cd_expiry;
timeout = ATAPI_WAIT_PC;
pc->xferred = 0;
pc->cur_pos = pc->buf;
- tf_flags = IDE_TFLAG_OUT_DEVICE;
+ valid_tf = IDE_VALID_DEVICE;
bcount = ((drive->media == ide_tape) ?
pc->req_xfer :
min(pc->req_xfer, 63 * 1024));
: WAIT_TAPE_CMD;
}
- ide_init_packet_cmd(cmd, tf_flags, bcount, drive->dma);
+ ide_init_packet_cmd(cmd, valid_tf, bcount, drive->dma);
(void)do_rw_taskfile(drive, cmd);
cdrom_analyze_sense_data(drive, NULL, sense);
}
+
/*
+ * Allow the drive 5 seconds to recover; some devices will return NOT_READY
+ * while flushing data from cache.
+ *
+ * returns: 0 failed (write timeout expired)
+ * 1 success
+ */
+static int ide_cd_breathe(ide_drive_t *drive, struct request *rq)
+{
+
+ struct cdrom_info *info = drive->driver_data;
+
+ if (!rq->errors)
+ info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY;
+
+ rq->errors = 1;
+
+ if (time_after(jiffies, info->write_timeout))
+ return 0;
+ else {
+ struct request_queue *q = drive->queue;
+ unsigned long flags;
+
+ /*
+ * take a breather relying on the unplug timer to kick us again
+ */
+
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_plug_device(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ return 1;
+ }
+}
+
+/**
* Returns:
* 0: if the request should be continued.
* 1: if the request will be going through error recovery.
* 2: if the request should be ended.
*/
-static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
+static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->rq;
- int stat, err, sense_key;
-
- /* check for errors */
- stat = hwif->tp_ops->read_status(hwif);
-
- if (stat_ret)
- *stat_ret = stat;
-
- if (OK_STAT(stat, good_stat, BAD_R_STAT))
- return 0;
+ int err, sense_key, do_end_request = 0;
/* get the IDE error register */
err = ide_read_error(drive);
sense_key = err >> 4;
- ide_debug_log(IDE_DBG_RQ, "stat: 0x%x, good_stat: 0x%x, cmd[0]: 0x%x, "
- "rq->cmd_type: 0x%x, err: 0x%x",
- stat, good_stat, rq->cmd[0], rq->cmd_type,
- err);
+ ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, rq->cmd_type: 0x%x, err: 0x%x, "
+ "stat 0x%x",
+ rq->cmd[0], rq->cmd_type, err, stat);
if (blk_sense_request(rq)) {
/*
*/
rq->cmd_flags |= REQ_FAILED;
return 2;
- } else if (blk_pc_request(rq) || rq->cmd_type == REQ_TYPE_ATA_PC) {
- /* All other functions, except for READ. */
+ }
- /*
- * if we have an error, pass back CHECK_CONDITION as the
- * scsi status byte
- */
- if (blk_pc_request(rq) && !rq->errors)
- rq->errors = SAM_STAT_CHECK_CONDITION;
+ /* if we have an error, pass CHECK_CONDITION as the SCSI status byte */
+ if (blk_pc_request(rq) && !rq->errors)
+ rq->errors = SAM_STAT_CHECK_CONDITION;
- /* check for tray open */
- if (sense_key == NOT_READY) {
- cdrom_saw_media_change(drive);
- } else if (sense_key == UNIT_ATTENTION) {
- /* check for media change */
+ if (blk_noretry_request(rq))
+ do_end_request = 1;
+
+ switch (sense_key) {
+ case NOT_READY:
+ if (blk_fs_request(rq) && rq_data_dir(rq) == WRITE) {
+ if (ide_cd_breathe(drive, rq))
+ return 1;
+ } else {
cdrom_saw_media_change(drive);
- return 0;
- } else if (sense_key == ILLEGAL_REQUEST &&
- rq->cmd[0] == GPCMD_START_STOP_UNIT) {
- /*
- * Don't print error message for this condition--
- * SFF8090i indicates that 5/24/00 is the correct
- * response to a request to close the tray if the
- * drive doesn't have that capability.
- * cdrom_log_sense() knows this!
- */
- } else if (!(rq->cmd_flags & REQ_QUIET)) {
- /* otherwise, print an error */
- ide_dump_status(drive, "packet command error", stat);
+
+ if (blk_fs_request(rq) && !blk_rq_quiet(rq))
+ printk(KERN_ERR PFX "%s: tray open\n",
+ drive->name);
}
+ do_end_request = 1;
+ break;
+ case UNIT_ATTENTION:
+ cdrom_saw_media_change(drive);
- rq->cmd_flags |= REQ_FAILED;
+ if (blk_fs_request(rq) == 0)
+ return 0;
/*
- * instead of playing games with moving completions around,
- * remove failed request completely and end it when the
- * request sense has completed
+ * Arrange to retry the request but be sure to give up if we've
+ * retried too many times.
*/
- goto end_request;
-
- } else if (blk_fs_request(rq)) {
- int do_end_request = 0;
-
- /* handle errors from READ and WRITE requests */
-
- if (blk_noretry_request(rq))
+ if (++rq->errors > ERROR_MAX)
do_end_request = 1;
-
- if (sense_key == NOT_READY) {
- /* tray open */
- if (rq_data_dir(rq) == READ) {
- cdrom_saw_media_change(drive);
-
- /* fail the request */
- printk(KERN_ERR PFX "%s: tray open\n",
- drive->name);
- do_end_request = 1;
- } else {
- struct cdrom_info *info = drive->driver_data;
-
- /*
- * Allow the drive 5 seconds to recover, some
- * devices will return this error while flushing
- * data from cache.
- */
- if (!rq->errors)
- info->write_timeout = jiffies +
- ATAPI_WAIT_WRITE_BUSY;
- rq->errors = 1;
- if (time_after(jiffies, info->write_timeout))
- do_end_request = 1;
- else {
- struct request_queue *q = drive->queue;
- unsigned long flags;
-
- /*
- * take a breather relying on the unplug
- * timer to kick us again
- */
- spin_lock_irqsave(q->queue_lock, flags);
- blk_plug_device(q);
- spin_unlock_irqrestore(q->queue_lock, flags);
-
- return 1;
- }
- }
- } else if (sense_key == UNIT_ATTENTION) {
- /* media change */
- cdrom_saw_media_change(drive);
-
- /*
- * Arrange to retry the request but be sure to give up
- * if we've retried too many times.
- */
- if (++rq->errors > ERROR_MAX)
- do_end_request = 1;
- } else if (sense_key == ILLEGAL_REQUEST ||
- sense_key == DATA_PROTECT) {
- /*
- * No point in retrying after an illegal request or data
- * protect error.
- */
+ break;
+ case ILLEGAL_REQUEST:
+ /*
+ * Don't print error message for this condition -- SFF8090i
+ * indicates that 5/24/00 is the correct response to a request
+ * to close the tray if the drive doesn't have that capability.
+ *
+ * cdrom_log_sense() knows this!
+ */
+ if (rq->cmd[0] == GPCMD_START_STOP_UNIT)
+ break;
+ /* fall-through */
+ case DATA_PROTECT:
+ /*
+ * No point in retrying after an illegal request or data
+ * protect error.
+ */
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "command error", stat);
- do_end_request = 1;
- } else if (sense_key == MEDIUM_ERROR) {
- /*
- * No point in re-trying a zillion times on a bad
- * sector. If we got here the error is not correctable.
- */
- ide_dump_status(drive, "media error (bad sector)",
+ do_end_request = 1;
+ break;
+ case MEDIUM_ERROR:
+ /*
+ * No point in re-trying a zillion times on a bad sector.
+ * If we got here the error is not correctable.
+ */
+ if (!blk_rq_quiet(rq))
+ ide_dump_status(drive, "media error "
+ "(bad sector)", stat);
+ do_end_request = 1;
+ break;
+ case BLANK_CHECK:
+ /* disk appears blank? */
+ if (!blk_rq_quiet(rq))
+ ide_dump_status(drive, "media error (blank)",
stat);
- do_end_request = 1;
- } else if (sense_key == BLANK_CHECK) {
- /* disk appears blank ?? */
- ide_dump_status(drive, "media error (blank)", stat);
- do_end_request = 1;
- } else if ((err & ~ATA_ABORTED) != 0) {
+ do_end_request = 1;
+ break;
+ default:
+ if (blk_fs_request(rq) == 0)
+ break;
+ if (err & ~ATA_ABORTED) {
/* go to the default handler for other errors */
ide_error(drive, "cdrom_decode_status", stat);
return 1;
- } else if ((++rq->errors > ERROR_MAX)) {
+ } else if (++rq->errors > ERROR_MAX)
/* we've racked up too many retries, abort */
do_end_request = 1;
- }
-
- /*
- * End a request through request sense analysis when we have
- * sense data. We need this in order to perform end of media
- * processing.
- */
- if (do_end_request)
- goto end_request;
+ }
- /*
- * If we got a CHECK_CONDITION status, queue
- * a request sense command.
- */
- if (stat & ATA_ERR)
- cdrom_queue_request_sense(drive, NULL, NULL);
- return 1;
- } else {
- blk_dump_rq_flags(rq, PFX "bad rq");
- return 2;
+ if (blk_fs_request(rq) == 0) {
+ rq->cmd_flags |= REQ_FAILED;
+ do_end_request = 1;
}
+ /*
+ * End a request through request sense analysis when we have sense data.
+ * We need this in order to perform end of media processing.
+ */
+ if (do_end_request)
+ goto end_request;
+
+ /* if we got a CHECK_CONDITION status, queue a request sense command */
+ if (stat & ATA_ERR)
+ cdrom_queue_request_sense(drive, NULL, NULL);
+ return 1;
+
end_request:
if (stat & ATA_ERR) {
struct request_queue *q = drive->queue;
struct ide_cmd *cmd = &hwif->cmd;
struct request *rq = hwif->rq;
ide_expiry_t *expiry = NULL;
- int dma_error = 0, dma, stat, thislen, uptodate = 0;
- int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors;
+ int dma_error = 0, dma, thislen, uptodate = 0;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
int sense = blk_sense_request(rq);
unsigned int timeout;
u16 len;
- u8 ireason;
+ u8 ireason, stat;
- ide_debug_log(IDE_DBG_PC, "cmd[0]: 0x%x, write: 0x%x",
- rq->cmd[0], write);
+ ide_debug_log(IDE_DBG_PC, "cmd: 0x%x, write: 0x%x", rq->cmd[0], write);
/* check for errors */
dma = drive->dma;
}
}
- rc = cdrom_decode_status(drive, 0, &stat);
- if (rc) {
- if (rc == 2)
- goto out_end;
- return ide_stopped;
+ /* check status */
+ stat = hwif->tp_ops->read_status(hwif);
+
+ if (!OK_STAT(stat, 0, BAD_R_STAT)) {
+ rc = cdrom_decode_status(drive, stat);
+ if (rc) {
+ if (rc == 2)
+ goto out_end;
+ return ide_stopped;
+ }
}
/* using dma, transfer is complete now */
}
memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
if (drive->dev_flags & IDE_DFLAG_LBA) {
if (lba48) {
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
- tf->hob_nsect = (nsectors >> 8) & 0xff;
- tf->hob_lbal = (u8)(block >> 24);
- if (sizeof(block) != 4) {
- tf->hob_lbam = (u8)((u64)block >> 32);
- tf->hob_lbah = (u8)((u64)block >> 40);
- }
-
tf->nsect = nsectors & 0xff;
tf->lbal = (u8) block;
tf->lbam = (u8)(block >> 8);
tf->lbah = (u8)(block >> 16);
+ tf->device = ATA_LBA;
- cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
+ tf = &cmd.hob;
+ tf->nsect = (nsectors >> 8) & 0xff;
+ tf->lbal = (u8)(block >> 24);
+ if (sizeof(block) != 4) {
+ tf->lbam = (u8)((u64)block >> 32);
+ tf->lbah = (u8)((u64)block >> 40);
+ }
+
+ cmd.valid.out.hob = IDE_VALID_OUT_HOB;
+ cmd.valid.in.hob = IDE_VALID_IN_HOB;
+ cmd.tf_flags |= IDE_TFLAG_LBA48;
} else {
tf->nsect = nsectors & 0xff;
tf->lbal = block;
tf->lbam = block >>= 8;
tf->lbah = block >>= 8;
- tf->device = (block >> 8) & 0xf;
+ tf->device = ((block >> 8) & 0xf) | ATA_LBA;
}
-
- tf->device |= ATA_LBA;
} else {
unsigned int sect, head, cyl, track;
tf->command = ATA_CMD_READ_NATIVE_MAX;
tf->device = ATA_LBA;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- if (lba48)
- cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
+ if (lba48) {
+ cmd.valid.out.hob = IDE_VALID_OUT_HOB;
+ cmd.valid.in.hob = IDE_VALID_IN_HOB;
+ cmd.tf_flags = IDE_TFLAG_LBA48;
+ }
ide_no_data_taskfile(drive, &cmd);
/* if OK, compute maximum address value */
if (!(tf->status & ATA_ERR))
- addr = ide_get_lba_addr(tf, lba48) + 1;
+ addr = ide_get_lba_addr(&cmd, lba48) + 1;
return addr;
}
tf->lbam = (addr_req >>= 8) & 0xff;
tf->lbah = (addr_req >>= 8) & 0xff;
if (lba48) {
- tf->hob_lbal = (addr_req >>= 8) & 0xff;
- tf->hob_lbam = (addr_req >>= 8) & 0xff;
- tf->hob_lbah = (addr_req >>= 8) & 0xff;
+ cmd.hob.lbal = (addr_req >>= 8) & 0xff;
+ cmd.hob.lbam = (addr_req >>= 8) & 0xff;
+ cmd.hob.lbah = (addr_req >>= 8) & 0xff;
tf->command = ATA_CMD_SET_MAX_EXT;
} else {
tf->device = (addr_req >>= 8) & 0x0f;
}
tf->device |= ATA_LBA;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- if (lba48)
- cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
+ if (lba48) {
+ cmd.valid.out.hob = IDE_VALID_OUT_HOB;
+ cmd.valid.in.hob = IDE_VALID_IN_HOB;
+ cmd.tf_flags = IDE_TFLAG_LBA48;
+ }
ide_no_data_taskfile(drive, &cmd);
/* if OK, compute maximum address value */
if (!(tf->status & ATA_ERR))
- addr_set = ide_get_lba_addr(tf, lba48) + 1;
+ addr_set = ide_get_lba_addr(&cmd, lba48) + 1;
return addr_set;
}
cmd->tf.command = ATA_CMD_FLUSH_EXT;
else
cmd->tf.command = ATA_CMD_FLUSH;
- cmd->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
- IDE_TFLAG_DYN;
+ cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd->tf_flags = IDE_TFLAG_DYN;
cmd->protocol = ATA_PROT_NODATA;
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
cmd.tf.feature = feature;
cmd.tf.nsect = nsect;
cmd.tf.command = ATA_CMD_SET_FEATURES;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
return ide_no_data_taskfile(drive, &cmd);
}
cmd.tf.command = ATA_CMD_FLUSH_EXT;
else
cmd.tf.command = ATA_CMD_FLUSH;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
return ide_no_data_taskfile(drive, &cmd);
}
memset(&cmd, 0, sizeof(cmd));
cmd.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
ret = ide_no_data_taskfile(drive, &cmd);
tf->lbam = ATA_SMART_LBAM_PASS;
tf->lbah = ATA_SMART_LBAH_PASS;
tf->command = ATA_CMD_SMART;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
return ide_no_data_taskfile(drive, &cmd);
}
tf->lbam = ATA_SMART_LBAM_PASS;
tf->lbah = ATA_SMART_LBAH_PASS;
tf->command = ATA_CMD_SMART;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
cmd.protocol = ATA_PROT_PIO;
return ide_raw_taskfile(drive, &cmd, buf, 1);
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
outb(dma_cmd | ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
}
-
- wmb();
}
EXPORT_SYMBOL_GPL(ide_dma_start);
int ide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat = 0, dma_cmd = 0, mask;
+ u8 dma_stat = 0, dma_cmd = 0;
/* stop DMA */
if (hwif->host_flags & IDE_HFLAG_MMIO) {
/* clear INTR & ERROR bits */
ide_dma_sff_write_status(hwif, dma_stat | ATA_DMA_ERR | ATA_DMA_INTR);
- wmb();
+#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR)
/* verify good DMA status */
- mask = ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR;
- if ((dma_stat & mask) != ATA_DMA_INTR)
+ if ((dma_stat & CHECK_DMA_MASK) != ATA_DMA_INTR)
return 0x10 | dma_stat;
return 0;
}
#include <linux/mutex.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
+#include <linux/dmi.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
(void)drive->disk_ops->get_capacity(drive);
}
+static const struct dmi_system_id ide_coldreboot_table[] = {
+ {
+ /* Acer TravelMate 66x cuts power during reboot */
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
+
+ { } /* terminate list */
+};
+
static void ide_gd_shutdown(ide_drive_t *drive)
{
#ifdef CONFIG_ALPHA
the disk to expire its write cache. */
if (system_state != SYSTEM_POWER_OFF) {
#else
- if (system_state == SYSTEM_RESTART) {
+ if (system_state == SYSTEM_RESTART &&
+ !dmi_check_system(ide_coldreboot_table)) {
#endif
drive->disk_ops->flush(drive);
return;
(r); \
})
-static void mm_outw(u16 d, unsigned long a)
-{
- __asm__("mov.b %w0,r2h\n\t"
- "mov.b %x0,r2l\n\t"
- "mov.w r2,@%1"
- :
- :"r"(d),"r"(a)
- :"er2");
-}
-
-static u16 mm_inw(unsigned long a)
-{
- register u16 r __asm__("er0");
- __asm__("mov.w @%1,r2\n\t"
- "mov.b r2l,%x0\n\t"
- "mov.b r2h,%w0"
- :"=r"(r)
- :"r"(a)
- :"er2");
- return r;
-}
-
-static void h8300_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
- if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- outb(tf->hob_feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- outb(tf->hob_nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- outb(tf->hob_lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- outb(tf->hob_lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
- outb(tf->feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
- outb(tf->nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
- outb(tf->lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
- outb(tf->lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
- outb(tf->lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
- outb((tf->device & HIHI) | drive->select,
- io_ports->device_addr);
-}
-
-static void h8300_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
-
- /* be sure we're looking at the low order bits */
- outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
- tf->error = inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = inb(io_ports->lbah_addr);
- }
-}
-
static void mm_outsw(unsigned long addr, void *buf, u32 len)
{
unsigned short *bp = (unsigned short *)buf;
.write_devctl = ide_write_devctl,
.dev_select = ide_dev_select,
- .tf_load = h8300_tf_load,
- .tf_read = h8300_tf_read,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
.input_data = h8300_input_data,
.output_data = h8300_output_data,
}
EXPORT_SYMBOL_GPL(ide_dev_select);
-void ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
+void ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
void (*tf_outb)(u8 addr, unsigned long port);
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
if (mmio)
tf_outb = ide_mm_outb;
else
tf_outb = ide_outb;
- if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- tf_outb(tf->hob_feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- tf_outb(tf->hob_nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- tf_outb(tf->hob_lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- tf_outb(tf->hob_lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- tf_outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
+ if (valid & IDE_VALID_FEATURE)
tf_outb(tf->feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
+ if (valid & IDE_VALID_NSECT)
tf_outb(tf->nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
+ if (valid & IDE_VALID_LBAL)
tf_outb(tf->lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
+ if (valid & IDE_VALID_LBAM)
tf_outb(tf->lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
+ if (valid & IDE_VALID_LBAH)
tf_outb(tf->lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tf_outb((tf->device & HIHI) | drive->select,
- io_ports->device_addr);
+ if (valid & IDE_VALID_DEVICE)
+ tf_outb(tf->device, io_ports->device_addr);
}
EXPORT_SYMBOL_GPL(ide_tf_load);
-void ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
+void ide_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
{
ide_hwif_t *hwif = drive->hwif;
struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- void (*tf_outb)(u8 addr, unsigned long port);
u8 (*tf_inb)(unsigned long port);
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- if (mmio) {
- tf_outb = ide_mm_outb;
+ if (mmio)
tf_inb = ide_mm_inb;
- } else {
- tf_outb = ide_outb;
+ else
tf_inb = ide_inb;
- }
-
- /* be sure we're looking at the low order bits */
- tf_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
+ if (valid & IDE_VALID_ERROR)
tf->error = tf_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
+ if (valid & IDE_VALID_NSECT)
tf->nsect = tf_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
+ if (valid & IDE_VALID_LBAL)
tf->lbal = tf_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
+ if (valid & IDE_VALID_LBAM)
tf->lbam = tf_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
+ if (valid & IDE_VALID_LBAH)
tf->lbah = tf_inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
+ if (valid & IDE_VALID_DEVICE)
tf->device = tf_inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- tf_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = tf_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = tf_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = tf_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = tf_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = tf_inb(io_ports->lbah_addr);
- }
}
EXPORT_SYMBOL_GPL(ide_tf_read);
tp_ops->input_data(drive, cmd, data, 2);
- tf->data = data[0];
- tf->hob_data = data[1];
+ cmd->tf.data = data[0];
+ cmd->hob.data = data[1];
}
- tp_ops->tf_read(drive, cmd);
+ ide_tf_readback(drive, cmd);
if ((cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) &&
tf_cmd == ATA_CMD_IDLEIMMEDIATE) {
if (tf->lbal != 0xc4) {
printk(KERN_ERR "%s: head unload failed!\n",
drive->name);
- ide_tf_dump(drive->name, tf);
+ ide_tf_dump(drive->name, cmd);
} else
drive->dev_flags |= IDE_DFLAG_PARKED;
}
- if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
- memcpy(rq->special, cmd, sizeof(*cmd));
+ if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+ struct ide_cmd *orig_cmd = rq->special;
- if (cmd->tf_flags & IDE_TFLAG_DYN)
- kfree(cmd);
+ if (cmd->tf_flags & IDE_TFLAG_DYN)
+ kfree(orig_cmd);
+ else
+ memcpy(orig_cmd, cmd, sizeof(*cmd));
+ }
}
/* obsolete, blk_rq_bytes() should be used instead */
return ide_stopped;
}
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE |
- IDE_TFLAG_CUSTOM_HANDLER;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
+ cmd.tf_flags = IDE_TFLAG_CUSTOM_HANDLER;
do_rw_taskfile(drive, &cmd);
}
spin_lock_irq(&hwif->lock);
enable_irq(hwif->irq);
- if (startstop == ide_stopped) {
+ if (startstop == ide_stopped && hwif->polling == 0) {
ide_unlock_port(hwif);
plug_device = 1;
}
* same irq as is currently being serviced here, and Linux
* won't allow another of the same (on any CPU) until we return.
*/
- if (startstop == ide_stopped) {
+ if (startstop == ide_stopped && hwif->polling == 0) {
BUG_ON(hwif->handler);
ide_unlock_port(hwif);
plug_device = 1;
tf->lbal = args[1];
tf->lbam = 0x4f;
tf->lbah = 0xc2;
- cmd.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF;
+ cmd.valid.in.tf = IDE_VALID_NSECT;
} else {
tf->nsect = args[1];
- cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT |
- IDE_TFLAG_IN_NSECT;
+ cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT;
+ cmd.valid.in.tf = IDE_VALID_NSECT;
}
tf->command = args[0];
cmd.protocol = args[3] ? ATA_PROT_PIO : ATA_PROT_NODATA;
return -EFAULT;
memset(&cmd, 0, sizeof(cmd));
- memcpy(&cmd.tf_array[7], &args[1], 6);
+ memcpy(&cmd.tf.feature, &args[1], 6);
cmd.tf.command = args[0];
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
err = ide_no_data_taskfile(drive, &cmd);
args[0] = cmd.tf.command;
- memcpy(&args[1], &cmd.tf_array[7], 6);
+ memcpy(&args[1], &cmd.tf.feature, 6);
if (copy_to_user(p, args, 7))
err = -EFAULT;
u8 ide_read_error(ide_drive_t *drive)
{
- struct ide_cmd cmd;
+ struct ide_taskfile tf;
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_IN_ERROR;
+ drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_ERROR);
- drive->hwif->tp_ops->tf_read(drive, &cmd);
-
- return cmd.tf.error;
+ return tf.error;
}
EXPORT_SYMBOL_GPL(ide_read_error);
/*
* Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
* Some optical devices with the buggy firmwares have the same problem.
*/
static const struct drive_list_entry ivb_list[] = {
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
- if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
- (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+ if (id[ATA_ID_HW_CONFIG] & 0x4000)
return 1;
+ if (ivb) {
+ const char *model = (char *)&id[ATA_ID_PROD];
+
+ if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+ /*
+ * These ATAPI devices always report 80c cable
+ * so we have to depend on the host in this case.
+ */
+ if (hwif->cbl == ATA_CBL_PATA80)
+ return 1;
+ } else {
+ /* Depend on the device side cable detection. */
+ if (id[ATA_ID_HW_CONFIG] & 0x2000)
+ return 1;
+ }
+ }
no_80w:
if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;
{
ide_hwif_t *hwif = drive->hwif;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+ struct ide_taskfile tf;
u16 *id = drive->id, i;
int error = 0;
u8 stat;
- struct ide_cmd cmd;
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_ops) /* check if host supports DMA */
udelay(1);
tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS);
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT;
- cmd.tf.feature = SETFEATURES_XFER;
- cmd.tf.nsect = speed;
+ memset(&tf, 0, sizeof(tf));
+ tf.feature = SETFEATURES_XFER;
+ tf.nsect = speed;
- tp_ops->tf_load(drive, &cmd);
+ tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE | IDE_VALID_NSECT);
tp_ops->exec_command(hwif, ATA_CMD_SET_FEATURES);
blk_queue_bounce_limit(drive->queue, addr);
}
-static void ide_dump_opcode(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->rq;
- struct ide_cmd *cmd = NULL;
-
- if (!rq)
- return;
-
- if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
- cmd = rq->special;
-
- printk(KERN_ERR "ide: failed opcode was: ");
- if (cmd == NULL)
- printk(KERN_CONT "unknown\n");
- else
- printk(KERN_CONT "0x%02x\n", cmd->tf.command);
-}
-
-u64 ide_get_lba_addr(struct ide_taskfile *tf, int lba48)
+u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48)
{
+ struct ide_taskfile *tf = &cmd->tf;
u32 high, low;
- if (lba48)
- high = (tf->hob_lbah << 16) | (tf->hob_lbam << 8) |
- tf->hob_lbal;
- else
- high = tf->device & 0xf;
low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
+ if (lba48) {
+ tf = &cmd->hob;
+ high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
+ } else
+ high = tf->device & 0xf;
return ((u64)high << 24) | low;
}
u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
memset(&cmd, 0, sizeof(cmd));
- if (lba48)
- cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_HOB_LBA |
- IDE_TFLAG_LBA48;
- else
- cmd.tf_flags = IDE_TFLAG_IN_LBA | IDE_TFLAG_IN_DEVICE;
+ if (lba48) {
+ cmd.valid.in.tf = IDE_VALID_LBA;
+ cmd.valid.in.hob = IDE_VALID_LBA;
+ cmd.tf_flags = IDE_TFLAG_LBA48;
+ } else
+ cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE;
- drive->hwif->tp_ops->tf_read(drive, &cmd);
+ ide_tf_readback(drive, &cmd);
if (lba48 || (tf->device & ATA_LBA))
printk(KERN_CONT ", LBAsect=%llu",
- (unsigned long long)ide_get_lba_addr(tf, lba48));
+ (unsigned long long)ide_get_lba_addr(&cmd, lba48));
else
printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
tf->device & 0xf, tf->lbal);
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
- printk(KERN_ERR "{ ");
+ printk(KERN_CONT "{ ");
if (err & ATA_ABORTED)
printk(KERN_CONT "DriveStatusError ");
if (err & ATA_ICRC)
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
- printk(KERN_ERR "{ ");
+ printk(KERN_CONT "{ ");
if (err & ATAPI_ILI)
printk(KERN_CONT "IllegalLengthIndication ");
if (err & ATAPI_EOM)
else
ide_dump_atapi_error(drive, err);
}
- ide_dump_opcode(drive);
+
+ printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n",
+ drive->name, drive->hwif->cmd.tf.command);
+
return err;
}
EXPORT_SYMBOL(ide_dump_status);
tf->lbal = 0x4c;
tf->lbam = 0x4e;
tf->lbah = 0x55;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
} else /* cmd == REQ_UNPARK_HEADS */
tf->command = ATA_CMD_CHK_POWER;
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
+static void netcell_quirkproc(ide_drive_t *drive)
+{
+ /* mark words 85-87 as valid */
+ drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+}
+
+static const struct ide_port_ops netcell_port_ops = {
+ .quirkproc = netcell_quirkproc,
+};
+
#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
{ \
.name = DRV_NAME, \
{ /* 6: Revolution */
.name = DRV_NAME,
+ .port_ops = &netcell_port_ops,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
return ide_stopped;
out_do_tf:
- cmd->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd->valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd->valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
cmd->protocol = ATA_PROT_NODATA;
return do_rw_taskfile(drive, cmd);
* identify command to be sure of reply
*/
if (cmd == ATA_CMD_ID_ATAPI) {
- struct ide_cmd cmd;
+ struct ide_taskfile tf;
- memset(&cmd, 0, sizeof(cmd));
+ memset(&tf, 0, sizeof(tf));
/* disable DMA & overlap */
- cmd.tf_flags = IDE_TFLAG_OUT_FEATURE;
-
- tp_ops->tf_load(drive, &cmd);
+ tp_ops->tf_load(drive, &tf, IDE_VALID_FEATURE);
}
/* ask drive for ID */
timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
- if (ide_busy_sleep(hwif, timeout, use_altstatus))
+ if (ide_busy_sleep(drive, timeout, use_altstatus))
return 1;
/* wait for IRQ and ATA_DRQ */
return rc;
}
-int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
+int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus)
{
+ ide_hwif_t *hwif = drive->hwif;
u8 stat;
timeout += jiffies;
return 0;
} while (time_before(jiffies, timeout));
+ printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__);
+
return 1; /* drive timed-out */
}
static u8 ide_read_device(ide_drive_t *drive)
{
- struct ide_cmd cmd;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.tf_flags = IDE_TFLAG_IN_DEVICE;
+ struct ide_taskfile tf;
- drive->hwif->tp_ops->tf_read(drive, &cmd);
+ drive->hwif->tp_ops->tf_read(drive, &tf, IDE_VALID_DEVICE);
- return cmd.tf.device;
+ return tf.device;
}
/**
tp_ops->dev_select(drive);
msleep(50);
tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
- (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
+ (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0);
rc = ide_dev_read_id(drive, cmd, id);
}
host->get_lock = d->get_lock;
host->release_lock = d->release_lock;
host->host_flags = d->host_flags;
+ host->irq_flags = d->irq_flags;
}
return host;
cmd.tf.command = ATA_CMD_SET_FEATURES;
cmd.tf.feature = SETFEATURES_XFER;
cmd.tf.nsect = (u8)arg;
- cmd.tf_flags = IDE_TFLAG_OUT_FEATURE | IDE_TFLAG_OUT_NSECT |
- IDE_TFLAG_IN_NSECT;
+ cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT;
+ cmd.valid.in.tf = IDE_VALID_NSECT;
err = ide_no_data_taskfile(drive, &cmd);
{
idetape_tape_t *tape = drive->driver_data;
- if (drive->pc->c[0] == REQUEST_SENSE &&
- pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
- "Two request sense in serial were issued\n");
- }
-
if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
drive->failed_pc = pc;
#include <asm/uaccess.h>
#include <asm/io.h>
-void ide_tf_dump(const char *s, struct ide_taskfile *tf)
+void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
+
+ /* Be sure we're looking at the low order bytes */
+ tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
+
+ tp_ops->tf_read(drive, &cmd->tf, cmd->valid.in.tf);
+
+ if (cmd->tf_flags & IDE_TFLAG_LBA48) {
+ tp_ops->write_devctl(hwif, ATA_HOB | ATA_DEVCTL_OBS);
+
+ tp_ops->tf_read(drive, &cmd->hob, cmd->valid.in.hob);
+ }
+}
+
+void ide_tf_dump(const char *s, struct ide_cmd *cmd)
{
#ifdef DEBUG
printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x "
"lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n",
- s, tf->feature, tf->nsect, tf->lbal,
- tf->lbam, tf->lbah, tf->device, tf->command);
- printk("%s: hob: nsect 0x%02x lbal 0x%02x "
- "lbam 0x%02x lbah 0x%02x\n",
- s, tf->hob_nsect, tf->hob_lbal,
- tf->hob_lbam, tf->hob_lbah);
+ s, cmd->tf.feature, cmd->tf.nsect,
+ cmd->tf.lbal, cmd->tf.lbam, cmd->tf.lbah,
+ cmd->tf.device, cmd->tf.command);
+ printk("%s: hob: nsect 0x%02x lbal 0x%02x lbam 0x%02x lbah 0x%02x\n",
+ s, cmd->hob.nsect, cmd->hob.lbal, cmd->hob.lbam, cmd->hob.lbah);
#endif
}
cmd.tf.command = ATA_CMD_ID_ATA;
else
cmd.tf.command = ATA_CMD_ID_ATAPI;
- cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_IN_TF | IDE_VALID_DEVICE;
cmd.protocol = ATA_PROT_PIO;
return ide_raw_taskfile(drive, &cmd, buf, 1);
memcpy(cmd, orig_cmd, sizeof(*cmd));
if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
- ide_tf_dump(drive->name, tf);
+ ide_tf_dump(drive->name, cmd);
tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
SELECT_MASK(drive, 0);
if (cmd->ftf_flags & IDE_FTFLAG_OUT_DATA) {
- u8 data[2] = { tf->data, tf->hob_data };
+ u8 data[2] = { cmd->tf.data, cmd->hob.data };
tp_ops->output_data(drive, cmd, data, 2);
}
- tp_ops->tf_load(drive, cmd);
+
+ if (cmd->valid.out.tf & IDE_VALID_DEVICE) {
+ u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ?
+ 0xE0 : 0xEF;
+
+ if (!(cmd->ftf_flags & IDE_FTFLAG_FLAGGED))
+ cmd->tf.device &= HIHI;
+ cmd->tf.device |= drive->select;
+ }
+
+ tp_ops->tf_load(drive, &cmd->hob, cmd->valid.out.hob);
+ tp_ops->tf_load(drive, &cmd->tf, cmd->valid.out.tf);
}
switch (cmd->protocol) {
memset(&cmd, 0, sizeof(cmd));
- memcpy(&cmd.tf_array[0], req_task->hob_ports,
- HDIO_DRIVE_HOB_HDR_SIZE - 2);
- memcpy(&cmd.tf_array[6], req_task->io_ports,
- HDIO_DRIVE_TASK_HDR_SIZE);
+ memcpy(&cmd.hob, req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2);
+ memcpy(&cmd.tf, req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE);
- cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE |
- IDE_TFLAG_IN_TF;
+ cmd.valid.out.tf = IDE_VALID_DEVICE;
+ cmd.valid.in.tf = IDE_VALID_DEVICE | IDE_VALID_IN_TF;
+ cmd.tf_flags = IDE_TFLAG_IO_16BIT;
- if (drive->dev_flags & IDE_DFLAG_LBA48)
- cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB);
+ if (drive->dev_flags & IDE_DFLAG_LBA48) {
+ cmd.tf_flags |= IDE_TFLAG_LBA48;
+ cmd.valid.in.hob = IDE_VALID_IN_HOB;
+ }
if (req_task->out_flags.all) {
cmd.ftf_flags |= IDE_FTFLAG_FLAGGED;
cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA;
if (req_task->out_flags.b.nsector_hob)
- cmd.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT;
+ cmd.valid.out.hob |= IDE_VALID_NSECT;
if (req_task->out_flags.b.sector_hob)
- cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL;
+ cmd.valid.out.hob |= IDE_VALID_LBAL;
if (req_task->out_flags.b.lcyl_hob)
- cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM;
+ cmd.valid.out.hob |= IDE_VALID_LBAM;
if (req_task->out_flags.b.hcyl_hob)
- cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH;
+ cmd.valid.out.hob |= IDE_VALID_LBAH;
if (req_task->out_flags.b.error_feature)
- cmd.tf_flags |= IDE_TFLAG_OUT_FEATURE;
+ cmd.valid.out.tf |= IDE_VALID_FEATURE;
if (req_task->out_flags.b.nsector)
- cmd.tf_flags |= IDE_TFLAG_OUT_NSECT;
+ cmd.valid.out.tf |= IDE_VALID_NSECT;
if (req_task->out_flags.b.sector)
- cmd.tf_flags |= IDE_TFLAG_OUT_LBAL;
+ cmd.valid.out.tf |= IDE_VALID_LBAL;
if (req_task->out_flags.b.lcyl)
- cmd.tf_flags |= IDE_TFLAG_OUT_LBAM;
+ cmd.valid.out.tf |= IDE_VALID_LBAM;
if (req_task->out_flags.b.hcyl)
- cmd.tf_flags |= IDE_TFLAG_OUT_LBAH;
+ cmd.valid.out.tf |= IDE_VALID_LBAH;
} else {
- cmd.tf_flags |= IDE_TFLAG_OUT_TF;
+ cmd.valid.out.tf |= IDE_VALID_OUT_TF;
if (cmd.tf_flags & IDE_TFLAG_LBA48)
- cmd.tf_flags |= IDE_TFLAG_OUT_HOB;
+ cmd.valid.out.hob |= IDE_VALID_OUT_HOB;
}
if (req_task->in_flags.b.data)
if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA)
nsect = 0;
else if (!nsect) {
- nsect = (cmd.tf.hob_nsect << 8) | cmd.tf.nsect;
+ nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect;
if (!nsect) {
printk(KERN_ERR "%s: in/out command without data\n",
err = ide_raw_taskfile(drive, &cmd, data_buf, nsect);
- memcpy(req_task->hob_ports, &cmd.tf_array[0],
- HDIO_DRIVE_HOB_HDR_SIZE - 2);
- memcpy(req_task->io_ports, &cmd.tf_array[6],
- HDIO_DRIVE_TASK_HDR_SIZE);
+ memcpy(req_task->hob_ports, &cmd.hob, HDIO_DRIVE_HOB_HDR_SIZE - 2);
+ memcpy(req_task->io_ports, &cmd.tf, HDIO_DRIVE_TASK_HDR_SIZE);
if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) &&
req_task->in_flags.all == 0) {
return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
}
-static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
+static void superio_tf_read(ide_drive_t *drive, struct ide_taskfile *tf,
+ u8 valid)
{
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- /* be sure we're looking at the low order bits */
- outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
+ if (valid & IDE_VALID_ERROR)
tf->error = inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
+ if (valid & IDE_VALID_NSECT)
tf->nsect = inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
+ if (valid & IDE_VALID_LBAL)
tf->lbal = inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
+ if (valid & IDE_VALID_LBAM)
tf->lbam = inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
+ if (valid & IDE_VALID_LBAH)
tf->lbah = inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
+ if (valid & IDE_VALID_DEVICE)
tf->device = superio_ide_inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = inb(io_ports->lbah_addr);
- }
}
static void ns87415_dev_select(ide_drive_t *drive);
/* Primary Control Offset */
#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
-/*
- * PalmChip 3710 IDE Controller UDMA timing structure Definition
- */
-struct palm_bk3710_udmatiming {
- unsigned int rptime; /* Ready to pause time */
- unsigned int cycletime; /* Cycle Time */
-};
-
#define BK3710_BMICP 0x00
#define BK3710_BMISP 0x02
#define BK3710_BMIDTP 0x04
-#define BK3710_BMICS 0x08
-#define BK3710_BMISS 0x0A
-#define BK3710_BMIDTS 0x0C
#define BK3710_IDETIMP 0x40
-#define BK3710_IDETIMS 0x42
-#define BK3710_SIDETIM 0x44
-#define BK3710_SLEWCTL 0x45
#define BK3710_IDESTATUS 0x47
#define BK3710_UDMACTL 0x48
-#define BK3710_UDMATIM 0x4A
#define BK3710_MISCCTL 0x50
#define BK3710_REGSTB 0x54
#define BK3710_REGRCVR 0x58
#define BK3710_UDMATRP 0x70
#define BK3710_UDMAENV 0x74
#define BK3710_IORDYTMP 0x78
-#define BK3710_IORDYTMS 0x7C
static unsigned ideclk_period; /* in nanoseconds */
+struct palm_bk3710_udmatiming {
+ unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
+ unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+ /* tENV is always a minimum of 20 nsec */
+};
+
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
- {160, 240}, /* UDMA Mode 0 */
- {125, 160}, /* UDMA Mode 1 */
- {100, 120}, /* UDMA Mode 2 */
- {100, 90}, /* UDMA Mode 3 */
- {100, 60}, /* UDMA Mode 4 */
- {85, 40}, /* UDMA Mode 5 */
+ { 160, 240 / 2 }, /* UDMA Mode 0 */
+ { 125, 160 / 2 }, /* UDMA Mode 1 */
+ { 100, 120 / 2 }, /* UDMA Mode 2 */
+ { 100, 90 / 2 }, /* UDMA Mode 3 */
+ { 100, 60 / 2 }, /* UDMA Mode 4 */
+ { 85, 40 / 2 }, /* UDMA Mode 5 */
};
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
ideclk_period) - 1;
- /* udmatim Register */
- val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
- val16 |= (mode << (dev ? 4 : 0));
- writew(val16, base + BK3710_UDMATIM);
-
/* udmastb Ultra DMA Access Strobe Width */
val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
val32 |= (t0 << (dev ? 8 : 0));
u32 val32;
struct ide_timing *t;
+ t = ide_timing_find_mode(XFER_PIO_0 + mode);
+
/* PIO Data Setup */
t0 = DIV_ROUND_UP(cycletime, ideclk_period);
- t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
- ideclk_period);
+ t2 = DIV_ROUND_UP(t->active, ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
}
/* TASKFILE Setup */
- t = ide_timing_find_mode(XFER_PIO_0 + mode);
t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
static void __devinit palm_bk3710_chipinit(void __iomem *base)
{
/*
- * enable the reset_en of ATA controller so that when ata signals
- * are brought out, by writing into device config. at that
- * time por_n signal should not be 'Z' and have a stable value.
+ * REVISIT: the ATA reset signal needs to be managed through a
+ * GPIO, which means it should come from platform_data. Until
+ * we get and use such information, we have to trust that things
+ * have been reset before we get here.
*/
- writel(0x0300, base + BK3710_MISCCTL);
-
- /* wait for some time and deassert the reset of ATA Device. */
- mdelay(100);
-
- /* Deassert the Reset */
- writel(0x0200, base + BK3710_MISCCTL);
/*
* Program the IDETIMP Register Value based on the following assumptions
*
* (ATA_IDETIMP_IDEEN , ENABLE ) |
- * (ATA_IDETIMP_SLVTIMEN , DISABLE) |
- * (ATA_IDETIMP_RDYSMPL , 70NS) |
- * (ATA_IDETIMP_RDYRCVRY , 50NS) |
- * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) |
* (ATA_IDETIMP_PREPOST1 , DISABLE) |
- * (ATA_IDETIMP_RDYSEN1 , DISABLE) |
- * (ATA_IDETIMP_PIOFTIM1 , DISABLE) |
- * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) |
* (ATA_IDETIMP_PREPOST0 , DISABLE) |
- * (ATA_IDETIMP_RDYSEN0 , DISABLE) |
- * (ATA_IDETIMP_PIOFTIM0 , DISABLE)
- */
- writew(0xB388, base + BK3710_IDETIMP);
-
- /*
- * Configure SIDETIM Register
- * (ATA_SIDETIM_RDYSMPS1 ,120NS ) |
- * (ATA_SIDETIM_RDYRCYS1 ,120NS )
+ *
+ * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+ * from enabling prefetch/postwrite.
*/
- writeb(0, base + BK3710_SIDETIM);
+ writew(BIT(15), base + BK3710_IDETIMP);
/*
* UDMACTL Ultra-ATA DMA Control
/*
* MISCCTL Miscellaneous Conrol Register
- * (ATA_MISCCTL_RSTMODEP , 1) |
- * (ATA_MISCCTL_RESETP , 0) |
+ * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
+ * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
* (ATA_MISCCTL_TIMORIDE , 1)
*/
- writel(0x201, base + BK3710_MISCCTL);
+ writel(0x001, base + BK3710_MISCCTL);
/*
* IORDYTMP IORDY Timer for Primary Register
clk_enable(clk);
rate = clk_get_rate(clk);
- ideclk_period = 1000000000UL / rate;
- /* Register the IDE interface with Linux ATA Interface */
- memset(&hw, 0, sizeof(hw));
+ /* NOTE: round *down* to meet minimum timings; we count in clocks */
+ ideclk_period = 1000000000UL / rate;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mem == NULL) {
/* Configure the Palm Chip controller */
palm_bk3710_chipinit(base);
+ memset(&hw, 0, sizeof(hw));
for (i = 0; i < IDE_NR_PORTS - 2; i++)
hw.io_ports_array[i] = (unsigned long)
(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
ATA_UDMA5;
+ /* Register the IDE interface with Linux */
rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
if (rc)
goto out;
/*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2006-2007 MontaVista Software, Inc.
+ * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* Portions Copyright (C) 1999 Promise Technology, Inc.
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
}
-static void pdc202xx_reset_host (ide_hwif_t *hwif)
+static void pdc202xx_reset(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
unsigned long high_16 = hwif->extra_base - 16;
u8 udma_speed_flag = inb(high_16 | 0x001f);
+ printk(KERN_WARNING "PDC202xx: software reset...\n");
+
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
mdelay(100);
outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
mdelay(2000); /* 2 seconds ?! */
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
- hwif->channel ? "Secondary" : "Primary");
-}
-
-static void pdc202xx_reset (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_hwif_t *mate = hwif->mate;
-
- pdc202xx_reset_host(hwif);
- pdc202xx_reset_host(mate);
-
ide_set_max_pio(drive);
}
.dma_start = ide_dma_start,
.dma_end = ide_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
- .dma_lost_irq = pdc202xx_dma_lost_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_clear = pdc202xx_reset,
.dma_sff_read_status = ide_dma_sff_read_status,
};
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
+ { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
/* end marker */
{ 0, }
};
* The +2 is +1 for the stop command and +1 to allow for
* aligning the start address to a multiple of 16 bytes.
*/
- pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+ pmif->dma_table_cpu = pci_alloc_consistent(
dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
#include <linux/blkdev.h>
#include <linux/ide.h>
+#include <asm/ide.h>
+
/*
* Bases of the IDE interfaces
*/
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS))
- return insw(data_addr, buf, (len + 1) / 2);
+ if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
+ __ide_mm_insw(data_addr, buf, (len + 1) / 2);
+ return;
+ }
raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
{
unsigned long data_addr = drive->hwif->io_ports.data_addr;
- if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS))
- return outsw(data_addr, buf, (len + 1) / 2);
+ if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) {
+ __ide_mm_outsw(data_addr, buf, (len + 1) / 2);
+ return;
+ }
raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2);
}
/* start DMA */
scc_ide_outb(dma_cmd | 1, hwif->dma_base);
- wmb();
}
static int __scc_dma_end(ide_drive_t *drive)
/* clear the INTR & ERROR bits */
scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
/* verify good DMA status */
- wmb();
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
}
return rc;
}
-static void scc_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
+static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
{
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- u8 HIHI = (cmd->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
- if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
+
+ if (valid & IDE_VALID_FEATURE)
scc_ide_outb(tf->feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
+ if (valid & IDE_VALID_NSECT)
scc_ide_outb(tf->nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
+ if (valid & IDE_VALID_LBAL)
scc_ide_outb(tf->lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
+ if (valid & IDE_VALID_LBAM)
scc_ide_outb(tf->lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
+ if (valid & IDE_VALID_LBAH)
scc_ide_outb(tf->lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
- scc_ide_outb((tf->device & HIHI) | drive->select,
- io_ports->device_addr);
+ if (valid & IDE_VALID_DEVICE)
+ scc_ide_outb(tf->device, io_ports->device_addr);
}
-static void scc_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
+static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
{
struct ide_io_ports *io_ports = &drive->hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
-
- /* be sure we're looking at the low order bits */
- scc_ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
+ if (valid & IDE_VALID_ERROR)
tf->error = scc_ide_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
+ if (valid & IDE_VALID_NSECT)
tf->nsect = scc_ide_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
+ if (valid & IDE_VALID_LBAL)
tf->lbal = scc_ide_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
+ if (valid & IDE_VALID_LBAM)
tf->lbam = scc_ide_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
+ if (valid & IDE_VALID_LBAH)
tf->lbah = scc_ide_inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
+ if (valid & IDE_VALID_DEVICE)
tf->device = scc_ide_inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- scc_ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = scc_ide_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr);
- }
}
static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
#ifdef __BIG_ENDIAN
/* custom iops (independent from SWAP_IO_SPACE) */
-static u8 tx4938ide_inb(unsigned long port)
-{
- return __raw_readb((void __iomem *)port);
-}
-
-static void tx4938ide_outb(u8 value, unsigned long port)
-{
- __raw_writeb(value, (void __iomem *)port);
-}
-
-static void tx4938ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- u8 HIHI = cmd->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF;
-
- if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- tx4938ide_outb(tf->hob_feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- tx4938ide_outb(tf->hob_nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- tx4938ide_outb(tf->hob_lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- tx4938ide_outb(tf->hob_lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- tx4938ide_outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
- tx4938ide_outb(tf->feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
- tx4938ide_outb(tf->nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
- tx4938ide_outb(tf->lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
- tx4938ide_outb(tf->lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
- tx4938ide_outb(tf->lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tx4938ide_outb((tf->device & HIHI) | drive->select,
- io_ports->device_addr);
-}
-
-static void tx4938ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
-
- /* be sure we're looking at the low order bits */
- tx4938ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
- tf->error = tx4938ide_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = tx4938ide_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = tx4938ide_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = tx4938ide_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = tx4938ide_inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = tx4938ide_inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- tx4938ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = tx4938ide_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = tx4938ide_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = tx4938ide_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = tx4938ide_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = tx4938ide_inb(io_ports->lbah_addr);
- }
-}
-
static void tx4938ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
void *buf, unsigned int len)
{
.write_devctl = ide_write_devctl,
.dev_select = ide_dev_select,
- .tf_load = tx4938ide_tf_load,
- .tf_read = tx4938ide_tf_read,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
.input_data = tx4938ide_input_data_swap,
.output_data = tx4938ide_output_data_swap,
/* read and clear the INTR & ERROR bits */
dma_stat = tx4939ide_clear_dma_status(base);
- wmb();
+#define CHECK_DMA_MASK (ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR)
/* verify good DMA status */
- if ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) == 0 &&
+ if ((dma_stat & CHECK_DMA_MASK) == 0 &&
(ctl & (TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST)) ==
(TX4939IDE_INT_XFEREND | TX4939IDE_INT_HOST))
/* INT_IDE lost... bug? */
return 0;
- return ((dma_stat & (ATA_DMA_INTR | ATA_DMA_ERR | ATA_DMA_ACTIVE)) !=
+ return ((dma_stat & CHECK_DMA_MASK) !=
ATA_DMA_INTR) ? 0x10 | dma_stat : 0;
}
tx4939ide_writew(sysctl, base, TX4939IDE_Sys_Ctl);
}
-#ifdef __BIG_ENDIAN
-
-/* custom iops (independent from SWAP_IO_SPACE) */
-static u8 tx4939ide_inb(unsigned long port)
+static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_taskfile *tf,
+ u8 valid)
{
- return __raw_readb((void __iomem *)port);
-}
+ ide_tf_load(drive, tf, valid);
-static void tx4939ide_outb(u8 value, unsigned long port)
-{
- __raw_writeb(value, (void __iomem *)port);
-}
-
-static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
- u8 HIHI = cmd->tf_flags & IDE_TFLAG_LBA48 ? 0xE0 : 0xEF;
-
- if (cmd->ftf_flags & IDE_FTFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- tx4939ide_outb(tf->hob_feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- tx4939ide_outb(tf->hob_nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- tx4939ide_outb(tf->hob_lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- tx4939ide_outb(tf->hob_lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- tx4939ide_outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_FEATURE)
- tx4939ide_outb(tf->feature, io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_NSECT)
- tx4939ide_outb(tf->nsect, io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAL)
- tx4939ide_outb(tf->lbal, io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAM)
- tx4939ide_outb(tf->lbam, io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_OUT_LBAH)
- tx4939ide_outb(tf->lbah, io_ports->lbah_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE) {
- tx4939ide_outb((tf->device & HIHI) | drive->select,
- io_ports->device_addr);
+ if (valid & IDE_VALID_DEVICE)
tx4939ide_tf_load_fixup(drive);
- }
}
-static void tx4939ide_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- struct ide_taskfile *tf = &cmd->tf;
-
- /* be sure we're looking at the low order bits */
- tx4939ide_outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_ERROR)
- tf->error = tx4939ide_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = tx4939ide_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = tx4939ide_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = tx4939ide_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = tx4939ide_inb(io_ports->lbah_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = tx4939ide_inb(io_ports->device_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_LBA48) {
- tx4939ide_outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
-
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_ERROR)
- tf->hob_error = tx4939ide_inb(io_ports->feature_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = tx4939ide_inb(io_ports->nsect_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = tx4939ide_inb(io_ports->lbal_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = tx4939ide_inb(io_ports->lbam_addr);
- if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = tx4939ide_inb(io_ports->lbah_addr);
- }
-}
+#ifdef __BIG_ENDIAN
-static void tx4939ide_input_data_swap(ide_drive_t *drive, struct request *rq,
+/* custom iops (independent from SWAP_IO_SPACE) */
+static void tx4939ide_input_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
void *buf, unsigned int len)
{
unsigned long port = drive->hwif->io_ports.data_addr;
__ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
}
-static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq,
+static void tx4939ide_output_data_swap(ide_drive_t *drive, struct ide_cmd *cmd,
void *buf, unsigned int len)
{
unsigned long port = drive->hwif->io_ports.data_addr;
.dev_select = ide_dev_select,
.tf_load = tx4939ide_tf_load,
- .tf_read = tx4939ide_tf_read,
+ .tf_read = ide_tf_read,
.input_data = tx4939ide_input_data_swap,
.output_data = tx4939ide_output_data_swap,
#else /* __LITTLE_ENDIAN */
-static void tx4939ide_tf_load(ide_drive_t *drive, struct ide_cmd *cmd)
-{
- ide_tf_load(drive, cmd);
-
- if (cmd->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tx4939ide_tf_load_fixup(drive);
-}
-
static const struct ide_tp_ops tx4939ide_tp_ops = {
.exec_command = ide_exec_command,
.read_status = ide_read_status,
u8 udma_mask;
u8 flags;
} via_isa_bridges[] = {
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
{ 0, },
module_param_named(debug, debug, uint, 0644);
MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
+static int forceload;
+module_param_named(forceload, forceload, uint, 0644);
+MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
+
#define dprintk(fmt, arg...) \
do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
cpus_clear(idle_cpumask);
total_us = 0;
- if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
+ if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
return -ENODEV;
if (i7300_idle_thrt_save())
id_priv->cma_dev = NULL;
}
-static int cma_set_qkey(struct ib_device *device, u8 port_num,
- enum rdma_port_space ps,
- struct rdma_dev_addr *dev_addr, u32 *qkey)
+static int cma_set_qkey(struct rdma_id_private *id_priv)
{
struct ib_sa_mcmember_rec rec;
int ret = 0;
- switch (ps) {
+ if (id_priv->qkey)
+ return 0;
+
+ switch (id_priv->id.ps) {
case RDMA_PS_UDP:
- *qkey = RDMA_UDP_QKEY;
+ id_priv->qkey = RDMA_UDP_QKEY;
break;
case RDMA_PS_IPOIB:
- ib_addr_get_mgid(dev_addr, &rec.mgid);
- ret = ib_sa_get_mcmember_rec(device, port_num, &rec.mgid, &rec);
- *qkey = be32_to_cpu(rec.qkey);
+ ib_addr_get_mgid(&id_priv->id.route.addr.dev_addr, &rec.mgid);
+ ret = ib_sa_get_mcmember_rec(id_priv->id.device,
+ id_priv->id.port_num, &rec.mgid,
+ &rec);
+ if (!ret)
+ id_priv->qkey = be32_to_cpu(rec.qkey);
break;
default:
break;
ret = ib_find_cached_gid(cma_dev->device, &gid,
&id_priv->id.port_num, NULL);
if (!ret) {
- ret = cma_set_qkey(cma_dev->device,
- id_priv->id.port_num,
- id_priv->id.ps, dev_addr,
- &id_priv->qkey);
- if (!ret)
- cma_attach_to_dev(id_priv, cma_dev);
+ cma_attach_to_dev(id_priv, cma_dev);
break;
}
}
*qp_attr_mask = IB_QP_STATE | IB_QP_PKEY_INDEX | IB_QP_PORT;
if (cma_is_ud_ps(id_priv->id.ps)) {
+ ret = cma_set_qkey(id_priv);
+ if (ret)
+ return ret;
+
qp_attr->qkey = id_priv->qkey;
*qp_attr_mask |= IB_QP_QKEY;
} else {
event.status = ib_event->param.sidr_rep_rcvd.status;
break;
}
+ ret = cma_set_qkey(id_priv);
+ if (ret) {
+ event.event = RDMA_CM_EVENT_ADDR_ERROR;
+ event.status = -EINVAL;
+ break;
+ }
if (id_priv->qkey != rep->qkey) {
event.event = RDMA_CM_EVENT_UNREACHABLE;
event.status = -EINVAL;
const void *private_data, int private_data_len)
{
struct ib_cm_sidr_rep_param rep;
+ int ret;
memset(&rep, 0, sizeof rep);
rep.status = status;
if (status == IB_SIDR_SUCCESS) {
+ ret = cma_set_qkey(id_priv);
+ if (ret)
+ return ret;
rep.qp_num = id_priv->qp_num;
rep.qkey = id_priv->qkey;
}
IB_SA_MCMEMBER_REC_FLOW_LABEL |
IB_SA_MCMEMBER_REC_TRAFFIC_CLASS;
+ if (id_priv->id.ps == RDMA_PS_IPOIB)
+ comp_mask |= IB_SA_MCMEMBER_REC_RATE |
+ IB_SA_MCMEMBER_REC_RATE_SELECTOR;
+
mc->multicast.ib = ib_sa_join_multicast(&sa_client, id_priv->id.device,
id_priv->id.port_num, &rec,
comp_mask, GFP_KERNEL,
sge_cmd = qpid << 8 | 3;
wqe->sge_cmd = cpu_to_be64(sge_cmd);
skb->priority = CPL_PRIORITY_CONTROL;
- return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb));
+ return iwch_cxgb3_ofld_send(rdev_p->t3cdev_p, skb);
}
int cxio_create_cq(struct cxio_rdev *rdev_p, struct t3_cq *cq)
ptr = wq->sq_rptr + count;
sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
while (ptr != wq->sq_wptr) {
+ sqp->signaled = 0;
insert_sq_cqe(wq, cq, sqp);
ptr++;
sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
(unsigned long long) rdev_p->ctrl_qp.dma_addr,
rdev_p->ctrl_qp.workq, 1 << T3_CTRL_QP_SIZE_LOG2);
skb->priority = CPL_PRIORITY_CONTROL;
- return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb));
+ return iwch_cxgb3_ofld_send(rdev_p->t3cdev_p, skb);
err:
kfree_skb(skb);
return err;
u32 stag_idx;
u32 wptr;
- if (rdev_p->flags)
+ if (cxio_fatal_error(rdev_p))
return -EIO;
stag_state = stag_state > 0;
wqe->qp_dma_size = cpu_to_be32(attr->qp_dma_size);
wqe->irs = cpu_to_be32(attr->irs);
skb->priority = 0; /* 0=>ToeQ; 1=>CtrlQ */
- return (cxgb3_ofld_send(rdev_p->t3cdev_p, skb));
+ return iwch_cxgb3_ofld_send(rdev_p->t3cdev_p, skb);
}
void cxio_register_ev_cb(cxio_hal_ev_callback_func_t ev_cb)
cxio_hal_pblpool_destroy(rdev_p);
cxio_hal_rqtpool_destroy(rdev_p);
list_del(&rdev_p->entry);
- rdev_p->t3cdev_p->ulp = NULL;
cxio_hal_destroy_ctrl_qp(rdev_p);
cxio_hal_destroy_resource(rdev_p->rscp);
+ rdev_p->t3cdev_p->ulp = NULL;
}
}
#define CXIO_ERROR_FATAL 1
};
+static inline int cxio_fatal_error(struct cxio_rdev *rdev_p)
+{
+ return rdev_p->flags & CXIO_ERROR_FATAL;
+}
+
static inline int cxio_num_stags(struct cxio_rdev *rdev_p)
{
return min((int)T3_MAX_NUM_STAG, (int)((rdev_p->rnic_info.tpt_top - rdev_p->rnic_info.tpt_base) >> 5));
void cxio_flush_hw_cq(struct t3_cq *cq);
int cxio_poll_cq(struct t3_wq *wq, struct t3_cq *cq, struct t3_cqe *cqe,
u8 *cqe_flushed, u64 *cookie, u32 *credit);
+int iwch_cxgb3_ofld_send(struct t3cdev *tdev, struct sk_buff *skb);
#define MOD "iw_cxgb3: "
#define PDBG(fmt, args...) pr_debug(MOD fmt, ## args)
static void iwch_err_handler(struct t3cdev *tdev, u32 status, u32 error)
{
struct cxio_rdev *rdev = tdev->ulp;
+ struct iwch_dev *rnicp = rdev_to_iwch_dev(rdev);
+ struct ib_event event;
- if (status == OFFLOAD_STATUS_DOWN)
+ if (status == OFFLOAD_STATUS_DOWN) {
rdev->flags = CXIO_ERROR_FATAL;
- return;
+ event.device = &rnicp->ibdev;
+ event.event = IB_EVENT_DEVICE_FATAL;
+ event.element.port_num = 0;
+ ib_dispatch_event(&event);
+ }
+ return;
}
static int __init iwch_init_module(void)
return container_of(ibdev, struct iwch_dev, ibdev);
}
+static inline struct iwch_dev *rdev_to_iwch_dev(struct cxio_rdev *rdev)
+{
+ return container_of(rdev, struct iwch_dev, rdev);
+}
+
static inline int t3b_device(const struct iwch_dev *rhp)
{
return rhp->rdev.t3cdev_p->type == T3B;
put_ep(&ep->com);
}
+int iwch_l2t_send(struct t3cdev *tdev, struct sk_buff *skb, struct l2t_entry *l2e)
+{
+ int error = 0;
+ struct cxio_rdev *rdev;
+
+ rdev = (struct cxio_rdev *)tdev->ulp;
+ if (cxio_fatal_error(rdev)) {
+ kfree_skb(skb);
+ return -EIO;
+ }
+ error = l2t_send(tdev, skb, l2e);
+ if (error)
+ kfree_skb(skb);
+ return error;
+}
+
+int iwch_cxgb3_ofld_send(struct t3cdev *tdev, struct sk_buff *skb)
+{
+ int error = 0;
+ struct cxio_rdev *rdev;
+
+ rdev = (struct cxio_rdev *)tdev->ulp;
+ if (cxio_fatal_error(rdev)) {
+ kfree_skb(skb);
+ return -EIO;
+ }
+ error = cxgb3_ofld_send(tdev, skb);
+ if (error)
+ kfree_skb(skb);
+ return error;
+}
+
static void release_tid(struct t3cdev *tdev, u32 hwtid, struct sk_buff *skb)
{
struct cpl_tid_release *req;
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, hwtid));
skb->priority = CPL_PRIORITY_SETUP;
- cxgb3_ofld_send(tdev, skb);
+ iwch_cxgb3_ofld_send(tdev, skb);
return;
}
req->val = cpu_to_be64(1 << S_TCB_RX_QUIESCE);
skb->priority = CPL_PRIORITY_DATA;
- cxgb3_ofld_send(ep->com.tdev, skb);
- return 0;
+ return iwch_cxgb3_ofld_send(ep->com.tdev, skb);
}
int iwch_resume_tid(struct iwch_ep *ep)
req->val = 0;
skb->priority = CPL_PRIORITY_DATA;
- cxgb3_ofld_send(ep->com.tdev, skb);
- return 0;
+ return iwch_cxgb3_ofld_send(ep->com.tdev, skb);
}
static void set_emss(struct iwch_ep *ep, u16 opt)
void __free_ep(struct kref *kref)
{
- struct iwch_ep_common *epc;
- epc = container_of(kref, struct iwch_ep_common, kref);
- PDBG("%s ep %p state %s\n", __func__, epc, states[state_read(epc)]);
- kfree(epc);
+ struct iwch_ep *ep;
+ ep = container_of(container_of(kref, struct iwch_ep_common, kref),
+ struct iwch_ep, com);
+ PDBG("%s ep %p state %s\n", __func__, ep, states[state_read(&ep->com)]);
+ if (ep->com.flags & RELEASE_RESOURCES) {
+ cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
+ dst_release(ep->dst);
+ l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ }
+ kfree(ep);
}
static void release_ep_resources(struct iwch_ep *ep)
{
PDBG("%s ep %p tid %d\n", __func__, ep, ep->hwtid);
- cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
- dst_release(ep->dst);
- l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+ ep->com.flags |= RELEASE_RESOURCES;
put_ep(&ep->com);
}
PDBG("%s t3cdev %p\n", __func__, dev);
req->cmd = CPL_ABORT_NO_RST;
- cxgb3_ofld_send(dev, skb);
+ iwch_cxgb3_ofld_send(dev, skb);
}
static int send_halfclose(struct iwch_ep *ep, gfp_t gfp)
req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_OFLD_CLOSE_CON));
req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid));
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_CON_REQ, ep->hwtid));
- l2t_send(ep->com.tdev, skb, ep->l2t);
- return 0;
+ return iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
}
static int send_abort(struct iwch_ep *ep, struct sk_buff *skb, gfp_t gfp)
req->wr.wr_lo = htonl(V_WR_TID(ep->hwtid));
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_ABORT_REQ, ep->hwtid));
req->cmd = CPL_ABORT_SEND_RST;
- l2t_send(ep->com.tdev, skb, ep->l2t);
- return 0;
+ return iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
}
static int send_connect(struct iwch_ep *ep)
req->opt0l = htonl(opt0l);
req->params = 0;
req->opt2 = htonl(opt2);
- l2t_send(ep->com.tdev, skb, ep->l2t);
- return 0;
+ return iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
}
static void send_mpa_req(struct iwch_ep *ep, struct sk_buff *skb)
req->sndseq = htonl(ep->snd_seq);
BUG_ON(ep->mpa_skb);
ep->mpa_skb = skb;
- l2t_send(ep->com.tdev, skb, ep->l2t);
+ iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
start_ep_timer(ep);
state_set(&ep->com, MPA_REQ_SENT);
return;
req->sndseq = htonl(ep->snd_seq);
BUG_ON(ep->mpa_skb);
ep->mpa_skb = skb;
- l2t_send(ep->com.tdev, skb, ep->l2t);
- return 0;
+ return iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
}
static int send_mpa_reply(struct iwch_ep *ep, const void *pdata, u8 plen)
req->sndseq = htonl(ep->snd_seq);
ep->mpa_skb = skb;
state_set(&ep->com, MPA_REP_SENT);
- l2t_send(ep->com.tdev, skb, ep->l2t);
- return 0;
+ return iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
}
static int act_establish(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_RX_DATA_ACK, ep->hwtid));
req->credit_dack = htonl(V_RX_CREDITS(credits) | V_RX_FORCE_ACK(1));
skb->priority = CPL_PRIORITY_ACK;
- cxgb3_ofld_send(ep->com.tdev, skb);
+ iwch_cxgb3_ofld_send(ep->com.tdev, skb);
return credits;
}
* We get 2 abort replies from the HW. The first one must
* be ignored except for scribbling that we need one more.
*/
- if (!(ep->flags & ABORT_REQ_IN_PROGRESS)) {
- ep->flags |= ABORT_REQ_IN_PROGRESS;
+ if (!(ep->com.flags & ABORT_REQ_IN_PROGRESS)) {
+ ep->com.flags |= ABORT_REQ_IN_PROGRESS;
return CPL_RET_BUF_DONE;
}
req->opt1 = htonl(V_CONN_POLICY(CPL_CONN_POLICY_ASK));
skb->priority = 1;
- cxgb3_ofld_send(ep->com.tdev, skb);
- return 0;
+ return iwch_cxgb3_ofld_send(ep->com.tdev, skb);
}
static int pass_open_rpl(struct t3cdev *tdev, struct sk_buff *skb, void *ctx)
req->cpu_idx = 0;
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_CLOSE_LISTSRV_REQ, ep->stid));
skb->priority = 1;
- cxgb3_ofld_send(ep->com.tdev, skb);
- return 0;
+ return iwch_cxgb3_ofld_send(ep->com.tdev, skb);
}
static int close_listsrv_rpl(struct t3cdev *tdev, struct sk_buff *skb,
rpl->opt2 = htonl(opt2);
rpl->rsvd = rpl->opt2; /* workaround for HW bug */
skb->priority = CPL_PRIORITY_SETUP;
- l2t_send(ep->com.tdev, skb, ep->l2t);
+ iwch_l2t_send(ep->com.tdev, skb, ep->l2t);
return;
}
rpl->opt0l_status = htonl(CPL_PASS_OPEN_REJECT);
rpl->opt2 = 0;
rpl->rsvd = rpl->opt2;
- cxgb3_ofld_send(tdev, skb);
+ iwch_cxgb3_ofld_send(tdev, skb);
}
}
* We get 2 peer aborts from the HW. The first one must
* be ignored except for scribbling that we need one more.
*/
- if (!(ep->flags & PEER_ABORT_IN_PROGRESS)) {
- ep->flags |= PEER_ABORT_IN_PROGRESS;
+ if (!(ep->com.flags & PEER_ABORT_IN_PROGRESS)) {
+ ep->com.flags |= PEER_ABORT_IN_PROGRESS;
return CPL_RET_BUF_DONE;
}
rpl->wr.wr_lo = htonl(V_WR_TID(ep->hwtid));
OPCODE_TID(rpl) = htonl(MK_OPCODE_TID(CPL_ABORT_RPL, ep->hwtid));
rpl->cmd = CPL_ABORT_NO_RST;
- cxgb3_ofld_send(ep->com.tdev, rpl_skb);
+ iwch_cxgb3_ofld_send(ep->com.tdev, rpl_skb);
out:
if (release)
release_ep_resources(ep);
ep->com.rpl_err = 0;
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
+
+ if (peer2peer && ep->ird == 0)
+ ep->ird = 1;
+
PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
get_ep(&ep->com);
conn_param->private_data, ep->plen);
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
+
+ if (peer2peer && ep->ord == 0)
+ ep->ord = 1;
+
ep->com.tdev = h->rdev.t3cdev_p;
cm_id->add_ref(cm_id);
ep->com.rpl_done = 0;
ep->com.rpl_err = 0;
err = listen_stop(ep);
+ if (err)
+ goto done;
wait_event(ep->com.waitq, ep->com.rpl_done);
cxgb3_free_stid(ep->com.tdev, ep->stid);
+done:
err = ep->com.rpl_err;
cm_id->rem_ref(cm_id);
put_ep(&ep->com);
int ret=0;
unsigned long flags;
int close = 0;
+ int fatal = 0;
+ struct t3cdev *tdev;
+ struct cxio_rdev *rdev;
spin_lock_irqsave(&ep->com.lock, flags);
PDBG("%s ep %p state %s, abrupt %d\n", __func__, ep,
states[ep->com.state], abrupt);
+ tdev = (struct t3cdev *)ep->com.tdev;
+ rdev = (struct cxio_rdev *)tdev->ulp;
+ if (cxio_fatal_error(rdev)) {
+ fatal = 1;
+ close_complete_upcall(ep);
+ ep->com.state = DEAD;
+ }
switch (ep->com.state) {
case MPA_REQ_WAIT:
case MPA_REQ_SENT:
ret = send_abort(ep, NULL, gfp);
else
ret = send_halfclose(ep, gfp);
+ if (ret)
+ fatal = 1;
}
+ if (fatal)
+ release_ep_resources(ep);
return ret;
}
enum iwch_ep_flags {
PEER_ABORT_IN_PROGRESS = (1 << 0),
ABORT_REQ_IN_PROGRESS = (1 << 1),
+ RELEASE_RESOURCES = (1 << 2),
};
struct iwch_ep_common {
wait_queue_head_t waitq;
int rpl_done;
int rpl_err;
+ u32 flags;
};
struct iwch_listen_ep {
u16 plen;
u32 ird;
u32 ord;
- u32 flags;
};
static inline struct iwch_ep *to_ep(struct iw_cm_id *cm_id)
wqe->send.wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(qhp->ep->hwtid)|
V_FW_RIWR_LEN(flit_cnt));
skb->priority = CPL_PRIORITY_DATA;
- return cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb);
+ return iwch_cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb);
}
/*
V_FW_RIWR_FLAGS(T3_COMPLETION_FLAG | T3_NOTIFY_FLAG));
wqe->send.wrh.gen_tid_len = cpu_to_be32(V_FW_RIWR_TID(qhp->ep->hwtid));
skb->priority = CPL_PRIORITY_DATA;
- return cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb);
+ return iwch_cxgb3_ofld_send(qhp->rhp->rdev.t3cdev_p, skb);
}
/*
goto out;
}
qhp->attr.state = IWCH_QP_STATE_IDLE;
- memset(&qhp->attr, 0, sizeof(qhp->attr));
break;
case IWCH_QP_STATE_TERMINATE:
if (!internal) {
spin_unlock_irqrestore(&ipath_devs_lock, flags);
ret = create_device_files(sb, dd);
if (ret) {
- deactivate_super(sb);
+ deactivate_locked_super(sb);
goto bail;
}
spin_lock_irqsave(&ipath_devs_lock, flags);
PAGE_SIZE, vma->vm_page_prot))
return -EAGAIN;
} else if (vma->vm_pgoff == 1 && dev->dev->caps.bf_reg_size != 0) {
- /* FIXME want pgprot_writecombine() for BlueFlame pages */
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
if (io_remap_pfn_range(vma, vma->vm_start,
to_mucontext(context)->uar.pfn +
struct mlx4_ib_fast_reg_page_list {
struct ib_fast_reg_page_list ibfrpl;
+ __be64 *mapped_page_list;
dma_addr_t map;
};
if (!mfrpl)
return ERR_PTR(-ENOMEM);
- mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
+ mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL);
+ if (!mfrpl->ibfrpl.page_list)
+ goto err_free;
+
+ mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
size, &mfrpl->map,
GFP_KERNEL);
if (!mfrpl->ibfrpl.page_list)
return &mfrpl->ibfrpl;
err_free:
+ kfree(mfrpl->ibfrpl.page_list);
kfree(mfrpl);
return ERR_PTR(-ENOMEM);
}
struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list);
int size = page_list->max_page_list_len * sizeof (u64);
- dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list,
+ dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list,
mfrpl->map);
+ kfree(mfrpl->ibfrpl.page_list);
kfree(mfrpl);
}
int i;
for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
- wr->wr.fast_reg.page_list->page_list[i] =
+ mfrpl->mapped_page_list[i] =
cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
MLX4_MTT_FLAG_PRESENT);
enum {
CMD_TIME_CLASS_A = (HZ + 999) / 1000 + 1,
CMD_TIME_CLASS_B = (HZ + 99) / 100 + 1,
- CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1
+ CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1,
+ CMD_TIME_CLASS_D = 60 * HZ
};
#else
enum {
CMD_TIME_CLASS_A = 60 * HZ,
CMD_TIME_CLASS_B = 60 * HZ,
- CMD_TIME_CLASS_C = 60 * HZ
+ CMD_TIME_CLASS_C = 60 * HZ,
+ CMD_TIME_CLASS_D = 60 * HZ
};
#endif
u64 out;
int ret;
- ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, HZ, status);
+ ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D, status);
if (*status == MTHCA_CMD_STAT_DDR_MEM_ERR)
mthca_warn(dev, "SYS_EN DDR error: syn=%x, sock=%d, "
int mthca_SYS_DIS(struct mthca_dev *dev, u8 *status)
{
- return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, HZ, status);
+ return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, CMD_TIME_CLASS_C, status);
}
static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm,
MTHCA_PUT(inbox, param->uarc_base, INIT_HCA_UAR_CTX_BASE_OFFSET);
}
- err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, HZ, status);
+ err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, CMD_TIME_CLASS_D, status);
mthca_free_mailbox(dev, mailbox);
return err;
int mthca_CLOSE_IB(struct mthca_dev *dev, int port, u8 *status)
{
- return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, HZ, status);
+ return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, CMD_TIME_CLASS_A, status);
}
int mthca_CLOSE_HCA(struct mthca_dev *dev, int panic, u8 *status)
{
- return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, HZ, status);
+ return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, CMD_TIME_CLASS_C, status);
}
int mthca_SET_IB(struct mthca_dev *dev, struct mthca_set_ib_param *param,
#define QUEUE_DISCONNECTS
-#define DRV_BUILD "1"
-
#define DRV_NAME "iw_nes"
-#define DRV_VERSION "1.0 KO Build " DRV_BUILD
+#define DRV_VERSION "1.5.0.0"
#define PFX DRV_NAME ": "
/*
static inline void
set_wqe_64bit_value(__le32 *wqe_words, u32 index, u64 value)
{
- wqe_words[index] = cpu_to_le32((u32) ((unsigned long)value));
- wqe_words[index + 1] = cpu_to_le32((u32)(upper_32_bits((unsigned long)value)));
+ wqe_words[index] = cpu_to_le32((u32) value);
+ wqe_words[index + 1] = cpu_to_le32(upper_32_bits(value));
}
static inline void
#include <net/neighbour.h>
#include <net/route.h>
#include <net/ip_fib.h>
+#include <net/tcp.h>
#include "nes.h"
if (type == NES_TIMER_TYPE_CLOSE) {
new_send->timetosend += (HZ/10);
if (cm_node->recv_entry) {
+ kfree(new_send);
WARN_ON(1);
return -EINVAL;
}
if (ret != NETDEV_TX_OK) {
nes_debug(NES_DBG_CM, "Error sending packet %p "
"(jiffies = %lu)\n", new_send, jiffies);
- atomic_dec(&new_send->skb->users);
new_send->timetosend = jiffies;
+ ret = NETDEV_TX_OK;
} else {
cm_packets_sent++;
if (!send_retrans) {
struct list_head *list_node;
struct nes_cm_core *cm_core = g_cm_core;
u32 settimer = 0;
+ unsigned long timetosend;
int ret = NETDEV_TX_OK;
struct list_head timer_list;
nes_debug(NES_DBG_CM, "rexmit failed for "
"node=%p\n", cm_node);
cm_packets_bounced++;
- atomic_dec(&send_entry->skb->users);
send_entry->retrycount--;
nexttimeout = jiffies + NES_SHORT_TIME;
settimer = 1;
send_entry->retrycount);
if (send_entry->send_retrans) {
send_entry->retranscount--;
+ timetosend = (NES_RETRY_TIMEOUT <<
+ (NES_DEFAULT_RETRANS - send_entry->retranscount));
+
send_entry->timetosend = jiffies +
- NES_RETRY_TIMEOUT;
+ min(timetosend, NES_MAX_TIMEOUT);
if (nexttimeout > send_entry->timetosend ||
!settimer) {
nexttimeout = send_entry->timetosend;
spin_unlock_irqrestore(&cm_node->retrans_list_lock, flags);
rem_ref_cm_node(cm_node->cm_core, cm_node);
- if (ret != NETDEV_TX_OK) {
- nes_debug(NES_DBG_CM, "rexmit failed for cm_node=%p\n",
- cm_node);
- break;
- }
}
if (settimer) {
{
unsigned long flags;
struct nes_cm_listener *listen_node;
- __be32 tmp_addr = cpu_to_be32(dst_addr);
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->listen_list_lock, flags);
}
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
- nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
- &tmp_addr, dst_port);
-
/* no listener */
return NULL;
}
cm_node->nesqp = NULL;
}
- cm_node->freed = 1;
kfree(cm_node);
return 0;
}
nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
"refcnt=%d\n", cm_node, cm_node->state,
atomic_read(&cm_node->ref_count));
- cm_node->tcp_cntxt.rcv_nxt++;
- cleanup_retrans_entry(cm_node);
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
case NES_CM_STATE_SYN_SENT:
case NES_CM_STATE_ESTABLISHED:
case NES_CM_STATE_MPAREQ_SENT:
case NES_CM_STATE_MPAREJ_RCVD:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_LAST_ACK;
send_fin(cm_node, NULL);
break;
case NES_CM_STATE_FIN_WAIT1:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSING;
send_ack(cm_node, NULL);
/* Wait for ACK as this is simultanous close..
* Just rm the node.. Done.. */
break;
case NES_CM_STATE_FIN_WAIT2:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_TIME_WAIT;
send_ack(cm_node, NULL);
schedule_nes_timer(cm_node, NULL, NES_TIMER_TYPE_CLOSE, 1, 0);
break;
case NES_CM_STATE_TIME_WAIT:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
rem_ref_cm_node(cm_node->cm_core, cm_node);
break;
passive_state = atomic_add_return(1, &cm_node->passive_state);
if (passive_state == NES_SEND_RESET_EVENT)
create_event(cm_node, NES_CM_EVENT_RESET);
- cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
dev_kfree_skb_any(skb);
break;
active_open_err(cm_node, skb, reset);
break;
case NES_CM_STATE_CLOSED:
- cleanup_retrans_entry(cm_node);
drop_packet(skb);
break;
+ case NES_CM_STATE_LAST_ACK:
+ cm_node->cm_id->rem_ref(cm_node->cm_id);
case NES_CM_STATE_TIME_WAIT:
- cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
case NES_CM_STATE_FIN_WAIT1:
- cleanup_retrans_entry(cm_node);
nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
default:
drop_packet(skb);
NES_PASSIVE_STATE_INDICATED);
break;
case NES_CM_STATE_MPAREQ_SENT:
+ cleanup_retrans_entry(cm_node);
if (res_type == NES_MPA_REQUEST_REJECT) {
type = NES_CM_EVENT_MPA_REJECT;
cm_node->state = NES_CM_STATE_MPAREJ_RCVD;
rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
if (ack_seq != loc_seq_num)
err = 1;
- else if ((seq + rcv_wnd) < rcv_nxt)
+ else if (!between(seq, rcv_nxt, (rcv_nxt+rcv_wnd)))
err = 1;
if (err) {
nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
}
}
-static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
struct tcphdr *tcph)
{
int datasize = 0;
u32 inc_sequence;
u32 rem_seq_ack;
u32 rem_seq;
- int ret;
+ int ret = 0;
int optionsize;
optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
if (check_seq(cm_node, tcph, skb))
- return;
+ return -EINVAL;
skb_pull(skb, tcph->doff << 2);
inc_sequence = ntohl(tcph->seq);
rem_seq = ntohl(tcph->seq);
rem_seq_ack = ntohl(tcph->ack_seq);
datasize = skb->len;
- cleanup_retrans_entry(cm_node);
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
/* Passive OPEN */
+ cleanup_retrans_entry(cm_node);
ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 1);
if (ret)
break;
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
- if (cm_node->tcp_cntxt.rem_ack_num !=
- cm_node->tcp_cntxt.loc_seq_num) {
- nes_debug(NES_DBG_CM, "rem_ack_num != loc_seq_num\n");
- cleanup_retrans_entry(cm_node);
- send_reset(cm_node, skb);
- return;
- }
cm_node->state = NES_CM_STATE_ESTABLISHED;
- cleanup_retrans_entry(cm_node);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else { /* rcvd ACK only */
+ } else /* rcvd ACK only */
dev_kfree_skb_any(skb);
- cleanup_retrans_entry(cm_node);
- }
break;
case NES_CM_STATE_ESTABLISHED:
/* Passive OPEN */
drop_packet(skb);
break;
case NES_CM_STATE_MPAREQ_SENT:
- cleanup_retrans_entry(cm_node);
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else { /* Could be just an ack pkt.. */
- cleanup_retrans_entry(cm_node);
+ } else /* Could be just an ack pkt.. */
dev_kfree_skb_any(skb);
- }
break;
case NES_CM_STATE_LISTENING:
case NES_CM_STATE_CLOSED:
send_reset(cm_node, skb);
break;
case NES_CM_STATE_LAST_ACK:
+ case NES_CM_STATE_CLOSING:
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
cm_node->cm_id->rem_ref(cm_node->cm_id);
- case NES_CM_STATE_CLOSING:
- cleanup_retrans_entry(cm_node);
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
case NES_CM_STATE_MPAREQ_RCVD:
case NES_CM_STATE_UNKNOWN:
default:
+ cleanup_retrans_entry(cm_node);
drop_packet(skb);
break;
}
+ return ret;
}
enum nes_tcpip_pkt_type pkt_type = NES_PKT_TYPE_UNKNOWN;
struct tcphdr *tcph = tcp_hdr(skb);
u32 fin_set = 0;
+ int ret = 0;
skb_pull(skb, ip_hdr(skb)->ihl << 2);
nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
handle_synack_pkt(cm_node, skb, tcph);
break;
case NES_PKT_TYPE_ACK:
- handle_ack_pkt(cm_node, skb, tcph);
- if (fin_set)
+ ret = handle_ack_pkt(cm_node, skb, tcph);
+ if (fin_set && !ret)
handle_fin_pkt(cm_node);
break;
case NES_PKT_TYPE_RST:
handle_rst_pkt(cm_node, skb, tcph);
break;
default:
- drop_packet(skb);
- if (fin_set)
+ if ((fin_set) && (!check_seq(cm_node, tcph, skb)))
handle_fin_pkt(cm_node);
+ drop_packet(skb);
break;
}
}
if (loopbackremotelistener == NULL) {
create_event(cm_node, NES_CM_EVENT_ABORTED);
} else {
- atomic_inc(&cm_loopbacks);
loopback_cm_info = *cm_info;
loopback_cm_info.loc_port = cm_info->rem_port;
loopback_cm_info.rem_port = cm_info->loc_port;
loopback_cm_info.cm_id = loopbackremotelistener->cm_id;
loopbackremotenode = make_cm_node(cm_core, nesvnic,
&loopback_cm_info, loopbackremotelistener);
+ if (!loopbackremotenode) {
+ rem_ref_cm_node(cm_node->cm_core, cm_node);
+ return NULL;
+ }
+ atomic_inc(&cm_loopbacks);
loopbackremotenode->loopbackpartner = cm_node;
loopbackremotenode->tcp_cntxt.rcv_wscale =
NES_CM_DEFAULT_RCV_WND_SCALE;
struct ib_mr *ibmr = NULL;
struct ib_phys_buf ibphysbuf;
struct nes_pd *nespd;
+ u64 tagged_offset;
/* associate the node with the QP */
nesqp->cm_node = (void *)cm_node;
cm_node->nesqp = nesqp;
- nes_add_ref(&nesqp->ibqp);
nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n",
nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener);
ibphysbuf.addr = nesqp->ietf_frame_pbase;
ibphysbuf.size = conn_param->private_data_len +
sizeof(struct ietf_mpa_frame);
+ tagged_offset = (u64)(unsigned long)nesqp->ietf_frame;
ibmr = nesibdev->ibdev.reg_phys_mr((struct ib_pd *)nespd,
&ibphysbuf, 1,
IB_ACCESS_LOCAL_WRITE,
- (u64 *)&nesqp->ietf_frame);
+ &tagged_offset);
if (!ibmr) {
nes_debug(NES_DBG_CM, "Unable to register memory region"
"for lSMM for cm_node = %p \n",
cm_node);
+ pci_free_consistent(nesdev->pcidev,
+ nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
+ nesqp->ietf_frame, nesqp->ietf_frame_pbase);
return -ENOMEM;
}
sizeof(struct ietf_mpa_frame));
set_wqe_64bit_value(wqe->wqe_words,
NES_IWARP_SQ_WQE_FRAG0_LOW_IDX,
- (u64)nesqp->ietf_frame);
+ (u64)(unsigned long)nesqp->ietf_frame);
wqe->wqe_words[NES_IWARP_SQ_WQE_LENGTH0_IDX] =
cpu_to_le32(conn_param->private_data_len +
sizeof(struct ietf_mpa_frame));
/* notify OF layer that accept event was successful */
cm_id->add_ref(cm_id);
+ nes_add_ref(&nesqp->ibqp);
cm_event.event = IW_CM_EVENT_ESTABLISHED;
cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
struct nes_device *nesdev;
struct nes_cm_node *cm_node;
struct nes_cm_info cm_info;
+ int apbvt_set = 0;
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
if (!ibqp)
conn_param->private_data_len);
if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr)
+ cm_id->remote_addr.sin_addr.s_addr) {
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+ apbvt_set = 1;
+ }
/* set up the connection params for the node */
cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr);
conn_param->private_data_len, (void *)conn_param->private_data,
&cm_info);
if (!cm_node) {
- if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr)
+ if (apbvt_set)
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
PCI_FUNC(nesdev->pcidev->devfn),
NES_MANAGE_APBVT_DEL);
return -ENOMEM;
}
- cm_node->apbvt_set = 1;
+ cm_node->apbvt_set = apbvt_set;
nesqp->cm_node = cm_node;
cm_node->nesqp = nesqp;
nes_add_ref(&nesqp->ibqp);
#endif
#define NES_SHORT_TIME (10)
#define NES_LONG_TIME (2000*HZ/1000)
+#define NES_MAX_TIMEOUT ((unsigned long) (12*HZ))
#define NES_CM_HASHTABLE_SIZE 1024
#define NES_CM_TCP_TIMER_INTERVAL 3000
struct nes_vnic *nesvnic;
int apbvt_set;
int accept_pend;
- int freed;
struct list_head timer_entry;
struct list_head reset_entry;
struct nes_qp *nesqp;
module_param(nes_lro_max_aggr, uint, 0444);
MODULE_PARM_DESC(nes_lro_max_aggr, "NIC LRO max packet aggregation");
+static int wide_ppm_offset;
+module_param(wide_ppm_offset, int, 0644);
+MODULE_PARM_DESC(wide_ppm_offset, "Increase CX4 interface clock ppm offset, 0=100ppm (default), 1=300ppm");
+
static u32 crit_err_count;
u32 int_mod_timer_init;
u32 int_mod_cq_depth_256;
}
if (int_cnt > 1) {
spin_lock_irqsave(&nesadapter->phy_lock, flags);
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F088);
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F0C8);
mh_detected++;
reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
reset_value |= 0x0000003d;
if (++ext_cnt > int_cnt) {
spin_lock_irqsave(&nesadapter->phy_lock, flags);
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1,
- 0x0000F0C8);
+ 0x0000F088);
mh_detected++;
reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
reset_value |= 0x0000003d;
{
int i;
u32 u32temp;
- u32 serdes_common_control;
+ u32 sds;
if (hw_rev != NE020_REV) {
/* init serdes 0 */
+ if (wide_ppm_offset && (nesadapter->phy_type[0] == NES_PHY_TYPE_CX4))
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL0, 0x000FFFAA);
+ else
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL0, 0x000000FF);
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL0, 0x000000FF);
if (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G) {
- serdes_common_control = nes_read_indexed(nesdev,
- NES_IDX_ETH_SERDES_COMMON_CONTROL0);
- serdes_common_control |= 0x000000100;
- nes_write_indexed(nesdev,
- NES_IDX_ETH_SERDES_COMMON_CONTROL0,
- serdes_common_control);
- } else if (!OneG_Mode) {
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE0, 0x11110000);
+ sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0);
+ sds |= 0x00000100;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, sds);
}
- if (((port_count > 1) &&
- (nesadapter->phy_type[0] != NES_PHY_TYPE_PUMA_1G)) ||
- ((port_count > 2) &&
- (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G))) {
- /* init serdes 1 */
+ if (!OneG_Mode)
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE0, 0x11110000);
+
+ if (port_count < 2)
+ return 0;
+
+ /* init serdes 1 */
+ if (!(OneG_Mode && (nesadapter->phy_type[1] != NES_PHY_TYPE_PUMA_1G)))
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
- if (nesadapter->phy_type[0] == NES_PHY_TYPE_PUMA_1G) {
- serdes_common_control = nes_read_indexed(nesdev,
- NES_IDX_ETH_SERDES_COMMON_CONTROL1);
- serdes_common_control |= 0x000000100;
- nes_write_indexed(nesdev,
- NES_IDX_ETH_SERDES_COMMON_CONTROL1,
- serdes_common_control);
- } else if (!OneG_Mode) {
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000);
- }
+
+ switch (nesadapter->phy_type[1]) {
+ case NES_PHY_TYPE_ARGUS:
+ case NES_PHY_TYPE_SFP_D:
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP0, 0x00000000);
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000);
+ break;
+ case NES_PHY_TYPE_CX4:
+ if (wide_ppm_offset)
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000FFFAA);
+ break;
+ case NES_PHY_TYPE_PUMA_1G:
+ sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
+ sds |= 0x000000100;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+ }
+ if (!OneG_Mode) {
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000);
+ sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
+ sds &= 0xFFFFFFBF;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
}
} else {
/* init serdes 0 */
u32temp &= 0x7fffffff;
u32temp |= 0x7fff0010;
nes_write_indexed(nesdev, 0x000021f8, u32temp);
+ if (port_count > 1) {
+ u32temp = nes_read_indexed(nesdev, 0x000023f8);
+ u32temp &= 0x7fffffff;
+ u32temp |= 0x7fff0010;
+ nes_write_indexed(nesdev, 0x000023f8, u32temp);
+ }
}
}
{
struct nes_adapter *nesadapter = nesdev->nesadapter;
u32 counter = 0;
- u32 sds_common_control0;
+ u32 sds;
u32 mac_index = nesdev->mac_index;
u32 tx_config = 0;
u16 phy_data;
u32 temp_phy_data = 0;
u32 temp_phy_data2 = 0;
- u32 i = 0;
+ u8 phy_type = nesadapter->phy_type[mac_index];
+ u8 phy_index = nesadapter->phy_index[mac_index];
if ((nesadapter->OneG_Mode) &&
- (nesadapter->phy_type[mac_index] != NES_PHY_TYPE_PUMA_1G)) {
+ (phy_type != NES_PHY_TYPE_PUMA_1G)) {
nes_debug(NES_DBG_PHY, "1G PHY, mac_index = %d.\n", mac_index);
- if (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_1G) {
- printk(PFX "%s: Programming mdc config for 1G\n", __func__);
+ if (phy_type == NES_PHY_TYPE_1G) {
tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG);
tx_config &= 0xFFFFFFE3;
tx_config |= 0x04;
nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config);
}
- nes_read_1G_phy_reg(nesdev, 1, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 1 phy address %u = 0x%X.\n",
- nesadapter->phy_index[mac_index], phy_data);
- nes_write_1G_phy_reg(nesdev, 23, nesadapter->phy_index[mac_index], 0xb000);
+ nes_read_1G_phy_reg(nesdev, 1, phy_index, &phy_data);
+ nes_write_1G_phy_reg(nesdev, 23, phy_index, 0xb000);
/* Reset the PHY */
- nes_write_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], 0x8000);
+ nes_write_1G_phy_reg(nesdev, 0, phy_index, 0x8000);
udelay(100);
counter = 0;
do {
- nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0 = 0x%X.\n", phy_data);
- if (counter++ > 100) break;
+ nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data);
+ if (counter++ > 100)
+ break;
} while (phy_data & 0x8000);
/* Setting no phy loopback */
phy_data &= 0xbfff;
phy_data |= 0x1140;
- nes_write_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], phy_data);
- nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0 = 0x%X.\n", phy_data);
-
- nes_read_1G_phy_reg(nesdev, 0x17, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x17 = 0x%X.\n", phy_data);
-
- nes_read_1G_phy_reg(nesdev, 0x1e, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x1e = 0x%X.\n", phy_data);
+ nes_write_1G_phy_reg(nesdev, 0, phy_index, phy_data);
+ nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data);
+ nes_read_1G_phy_reg(nesdev, 0x17, phy_index, &phy_data);
+ nes_read_1G_phy_reg(nesdev, 0x1e, phy_index, &phy_data);
/* Setting the interrupt mask */
- nes_read_1G_phy_reg(nesdev, 0x19, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x19 = 0x%X.\n", phy_data);
- nes_write_1G_phy_reg(nesdev, 0x19, nesadapter->phy_index[mac_index], 0xffee);
-
- nes_read_1G_phy_reg(nesdev, 0x19, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x19 = 0x%X.\n", phy_data);
+ nes_read_1G_phy_reg(nesdev, 0x19, phy_index, &phy_data);
+ nes_write_1G_phy_reg(nesdev, 0x19, phy_index, 0xffee);
+ nes_read_1G_phy_reg(nesdev, 0x19, phy_index, &phy_data);
/* turning on flow control */
- nes_read_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x4 = 0x%X.\n", phy_data);
- nes_write_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index],
- (phy_data & ~(0x03E0)) | 0xc00);
- /* nes_write_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index],
- phy_data | 0xc00); */
- nes_read_1G_phy_reg(nesdev, 4, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x4 = 0x%X.\n", phy_data);
-
- nes_read_1G_phy_reg(nesdev, 9, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x9 = 0x%X.\n", phy_data);
- /* Clear Half duplex */
- nes_write_1G_phy_reg(nesdev, 9, nesadapter->phy_index[mac_index],
- phy_data & ~(0x0100));
- nes_read_1G_phy_reg(nesdev, 9, nesadapter->phy_index[mac_index], &phy_data);
- nes_debug(NES_DBG_PHY, "Phy data from register 0x9 = 0x%X.\n", phy_data);
+ nes_read_1G_phy_reg(nesdev, 4, phy_index, &phy_data);
+ nes_write_1G_phy_reg(nesdev, 4, phy_index, (phy_data & ~(0x03E0)) | 0xc00);
+ nes_read_1G_phy_reg(nesdev, 4, phy_index, &phy_data);
- nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], &phy_data);
- nes_write_1G_phy_reg(nesdev, 0, nesadapter->phy_index[mac_index], phy_data | 0x0300);
- } else {
- if ((nesadapter->phy_type[mac_index] == NES_PHY_TYPE_IRIS) ||
- (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_ARGUS)) {
- /* setup 10G MDIO operation */
- tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG);
- tx_config &= 0xFFFFFFE3;
- tx_config |= 0x15;
- nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config);
- }
- if ((nesadapter->phy_type[mac_index] == NES_PHY_TYPE_ARGUS)) {
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee);
-
- temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
- mdelay(10);
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee);
- temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+ /* Clear Half duplex */
+ nes_read_1G_phy_reg(nesdev, 9, phy_index, &phy_data);
+ nes_write_1G_phy_reg(nesdev, 9, phy_index, phy_data & ~(0x0100));
+ nes_read_1G_phy_reg(nesdev, 9, phy_index, &phy_data);
- /*
- * if firmware is already running (like from a
- * driver un-load/load, don't do anything.
- */
- if (temp_phy_data == temp_phy_data2) {
- /* configure QT2505 AMCC PHY */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0x0000, 0x8000);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc300, 0x0000);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc302, 0x0044);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc318, 0x0052);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc319, 0x0008);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc31a, 0x0098);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0x0026, 0x0E00);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0x0027, 0x0001);
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0x0028, 0xA528);
+ nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data);
+ nes_write_1G_phy_reg(nesdev, 0, phy_index, phy_data | 0x0300);
- /*
- * remove micro from reset; chip boots from ROM,
- * uploads EEPROM f/w image, uC executes f/w
- */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc300, 0x0002);
+ return 0;
+ }
- /*
- * wait for heart beat to start to
- * know loading is done
- */
- counter = 0;
- do {
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee);
- temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
- if (counter++ > 1000) {
- nes_debug(NES_DBG_PHY, "AMCC PHY- breaking from heartbeat check <this is bad!!!> \n");
- break;
- }
- mdelay(100);
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7ee);
- temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
- } while ((temp_phy_data2 == temp_phy_data));
+ if ((phy_type == NES_PHY_TYPE_IRIS) ||
+ (phy_type == NES_PHY_TYPE_ARGUS) ||
+ (phy_type == NES_PHY_TYPE_SFP_D)) {
+ /* setup 10G MDIO operation */
+ tx_config = nes_read_indexed(nesdev, NES_IDX_MAC_TX_CONFIG);
+ tx_config &= 0xFFFFFFE3;
+ tx_config |= 0x15;
+ nes_write_indexed(nesdev, NES_IDX_MAC_TX_CONFIG, tx_config);
+ }
+ if ((phy_type == NES_PHY_TYPE_ARGUS) ||
+ (phy_type == NES_PHY_TYPE_SFP_D)) {
+ /* Check firmware heartbeat */
+ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee);
+ temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+ udelay(1500);
+ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee);
+ temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+
+ if (temp_phy_data != temp_phy_data2)
+ return 0;
- /*
- * wait for tracking to start to know
- * f/w is good to go
- */
- counter = 0;
- do {
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x3, 0xd7fd);
- temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
- if (counter++ > 1000) {
- nes_debug(NES_DBG_PHY, "AMCC PHY- breaking from status check <this is bad!!!> \n");
- break;
- }
- mdelay(1000);
- /*
- * nes_debug(NES_DBG_PHY, "AMCC PHY- phy_status not ready yet = 0x%02X\n",
- * temp_phy_data);
- */
- } while (((temp_phy_data & 0xff) != 0x50) && ((temp_phy_data & 0xff) != 0x70));
-
- /* set LOS Control invert RXLOSB_I_PADINV */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd003, 0x0000);
- /* set LOS Control to mask of RXLOSB_I */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xc314, 0x0042);
- /* set LED1 to input mode (LED1 and LED2 share same LED) */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd006, 0x0007);
- /* set LED2 to RX link_status and activity */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd007, 0x000A);
- /* set LED3 to RX link_status */
- nes_write_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 0x1, 0xd008, 0x0009);
+ /* no heartbeat, configure the PHY */
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0x0000, 0x8000);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc300, 0x0000);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc316, 0x000A);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc318, 0x0052);
+ if (phy_type == NES_PHY_TYPE_ARGUS) {
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
+ } else {
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x0004);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0038);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0013);
+ }
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00);
- /*
- * reset the res-calibration on t2
- * serdes; ensures it is stable after
- * the amcc phy is stable
- */
+ /* setup LEDs */
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd006, 0x0007);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd007, 0x000A);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd008, 0x0009);
- sds_common_control0 = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0);
- sds_common_control0 |= 0x1;
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, sds_common_control0);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0028, 0xA528);
- /* release the res-calibration reset */
- sds_common_control0 &= 0xfffffffe;
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, sds_common_control0);
+ /* Bring PHY out of reset */
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc300, 0x0002);
- i = 0;
- while (((nes_read32(nesdev->regs + NES_SOFTWARE_RESET) & 0x00000040) != 0x00000040)
- && (i++ < 5000)) {
- /* mdelay(1); */
- }
+ /* Check for heartbeat */
+ counter = 0;
+ mdelay(690);
+ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee);
+ temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+ do {
+ if (counter++ > 150) {
+ nes_debug(NES_DBG_PHY, "No PHY heartbeat\n");
+ break;
+ }
+ mdelay(1);
+ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7ee);
+ temp_phy_data2 = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+ } while ((temp_phy_data2 == temp_phy_data));
- /*
- * wait for link train done before moving on,
- * or will get an interupt storm
- */
- counter = 0;
- do {
- temp_phy_data = nes_read_indexed(nesdev, NES_IDX_PHY_PCS_CONTROL_STATUS0 +
- (0x200 * (nesdev->mac_index & 1)));
- if (counter++ > 1000) {
- nes_debug(NES_DBG_PHY, "AMCC PHY- breaking from link train wait <this is bad, link didnt train!!!>\n");
- break;
- }
- mdelay(1);
- } while (((temp_phy_data & 0x0f1f0000) != 0x0f0f0000));
+ /* wait for tracking */
+ counter = 0;
+ do {
+ nes_read_10G_phy_reg(nesdev, phy_index, 0x3, 0xd7fd);
+ temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+ if (counter++ > 300) {
+ nes_debug(NES_DBG_PHY, "PHY did not track\n");
+ break;
}
- }
+ mdelay(10);
+ } while (((temp_phy_data & 0xff) != 0x50) && ((temp_phy_data & 0xff) != 0x70));
+
+ /* setup signal integrity */
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd003, 0x0000);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xF00D, 0x00FE);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xF00E, 0x0032);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xF00F, 0x0002);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc314, 0x0063);
+
+ /* reset serdes */
+ sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0 +
+ mac_index * 0x200);
+ sds |= 0x1;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0 +
+ mac_index * 0x200, sds);
+ sds &= 0xfffffffe;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0 +
+ mac_index * 0x200, sds);
+
+ counter = 0;
+ while (((nes_read32(nesdev->regs + NES_SOFTWARE_RESET) & 0x00000040) != 0x00000040)
+ && (counter++ < 5000))
+ ;
}
return 0;
}
u16 temp_phy_data;
u32 pcs_val = 0x0f0f0000;
u32 pcs_mask = 0x0f1f0000;
+ u32 cdr_ctrl;
spin_lock_irqsave(&nesadapter->phy_lock, flags);
if (nesadapter->mac_sw_state[mac_number] != NES_MAC_SW_IDLE) {
break;
case NES_PHY_TYPE_ARGUS:
+ case NES_PHY_TYPE_SFP_D:
/* clear the alarms */
nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 4, 0x0008);
nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 4, 0xc001);
nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9004);
nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9005);
/* check link status */
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 1);
+ nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 0x9003);
temp_phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
- u32temp = 100;
- do {
- nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 1, 1);
- phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
- if ((phy_data == temp_phy_data) || (!(--u32temp)))
- break;
- temp_phy_data = phy_data;
- } while (1);
+ nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 3, 0x0021);
+ nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+ nes_read_10G_phy_reg(nesdev, nesadapter->phy_index[mac_index], 3, 0x0021);
+ phy_data = (u16)nes_read_indexed(nesdev, NES_IDX_MAC_MDIO_CONTROL);
+
+ phy_data = (!temp_phy_data && (phy_data == 0x8000)) ? 0x4 : 0x0;
+
nes_debug(NES_DBG_PHY, "%s: Phy data = 0x%04X, link was %s.\n",
- __func__, phy_data, nesadapter->mac_link_down ? "DOWN" : "UP");
+ __func__, phy_data, nesadapter->mac_link_down[mac_index] ? "DOWN" : "UP");
break;
case NES_PHY_TYPE_PUMA_1G:
}
if (phy_data & 0x0004) {
+ if (wide_ppm_offset &&
+ (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_CX4) &&
+ (nesadapter->hw_rev != NE020_REV)) {
+ cdr_ctrl = nes_read_indexed(nesdev,
+ NES_IDX_ETH_SERDES_CDR_CONTROL0 +
+ mac_index * 0x200);
+ nes_write_indexed(nesdev,
+ NES_IDX_ETH_SERDES_CDR_CONTROL0 +
+ mac_index * 0x200,
+ cdr_ctrl | 0x000F0000);
+ }
nesadapter->mac_link_down[mac_index] = 0;
list_for_each_entry(nesvnic, &nesadapter->nesvnic_list[mac_index], list) {
nes_debug(NES_DBG_PHY, "The Link is UP!!. linkup was %d\n",
}
}
} else {
+ if (wide_ppm_offset &&
+ (nesadapter->phy_type[mac_index] == NES_PHY_TYPE_CX4) &&
+ (nesadapter->hw_rev != NE020_REV)) {
+ cdr_ctrl = nes_read_indexed(nesdev,
+ NES_IDX_ETH_SERDES_CDR_CONTROL0 +
+ mac_index * 0x200);
+ nes_write_indexed(nesdev,
+ NES_IDX_ETH_SERDES_CDR_CONTROL0 +
+ mac_index * 0x200,
+ cdr_ctrl & 0xFFF0FFFF);
+ }
nesadapter->mac_link_down[mac_index] = 1;
list_for_each_entry(nesvnic, &nesadapter->nesvnic_list[mac_index], list) {
nes_debug(NES_DBG_PHY, "The Link is Down!!. linkup was %d\n",
#include <linux/inet_lro.h>
+#define NES_PHY_TYPE_CX4 1
#define NES_PHY_TYPE_1G 2
#define NES_PHY_TYPE_IRIS 3
#define NES_PHY_TYPE_ARGUS 4
#define NES_PHY_TYPE_PUMA_1G 5
#define NES_PHY_TYPE_PUMA_10G 6
#define NES_PHY_TYPE_GLADIUS 7
+#define NES_PHY_TYPE_SFP_D 8
#define NES_MULTICAST_PF_MAX 8
struct nes_vnic *nesvnic = netdev_priv(netdev);
struct nes_device *nesdev = nesvnic->nesdev;
struct nes_adapter *nesadapter = nesdev->nesadapter;
+ u32 mac_index = nesdev->mac_index;
+ u8 phy_type = nesadapter->phy_type[mac_index];
+ u8 phy_index = nesadapter->phy_index[mac_index];
u16 phy_data;
et_cmd->duplex = DUPLEX_FULL;
et_cmd->port = PORT_MII;
+ et_cmd->maxtxpkt = 511;
+ et_cmd->maxrxpkt = 511;
if (nesadapter->OneG_Mode) {
et_cmd->speed = SPEED_1000;
- if (nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_PUMA_1G) {
+ if (phy_type == NES_PHY_TYPE_PUMA_1G) {
et_cmd->supported = SUPPORTED_1000baseT_Full;
et_cmd->advertising = ADVERTISED_1000baseT_Full;
et_cmd->autoneg = AUTONEG_DISABLE;
et_cmd->transceiver = XCVR_INTERNAL;
- et_cmd->phy_address = nesdev->mac_index;
+ et_cmd->phy_address = mac_index;
} else {
- et_cmd->supported = SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg;
- et_cmd->advertising = ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg;
- nes_read_1G_phy_reg(nesdev, 0, nesadapter->phy_index[nesdev->mac_index], &phy_data);
+ et_cmd->supported = SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg;
+ et_cmd->advertising = ADVERTISED_1000baseT_Full
+ | ADVERTISED_Autoneg;
+ nes_read_1G_phy_reg(nesdev, 0, phy_index, &phy_data);
if (phy_data & 0x1000)
et_cmd->autoneg = AUTONEG_ENABLE;
else
et_cmd->autoneg = AUTONEG_DISABLE;
et_cmd->transceiver = XCVR_EXTERNAL;
- et_cmd->phy_address = nesadapter->phy_index[nesdev->mac_index];
+ et_cmd->phy_address = phy_index;
}
+ return 0;
+ }
+ if ((phy_type == NES_PHY_TYPE_IRIS) ||
+ (phy_type == NES_PHY_TYPE_ARGUS) ||
+ (phy_type == NES_PHY_TYPE_SFP_D)) {
+ et_cmd->transceiver = XCVR_EXTERNAL;
+ et_cmd->port = PORT_FIBRE;
+ et_cmd->supported = SUPPORTED_FIBRE;
+ et_cmd->advertising = ADVERTISED_FIBRE;
+ et_cmd->phy_address = phy_index;
} else {
- if ((nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_IRIS) ||
- (nesadapter->phy_type[nesdev->mac_index] == NES_PHY_TYPE_ARGUS)) {
- et_cmd->transceiver = XCVR_EXTERNAL;
- et_cmd->port = PORT_FIBRE;
- et_cmd->supported = SUPPORTED_FIBRE;
- et_cmd->advertising = ADVERTISED_FIBRE;
- et_cmd->phy_address = nesadapter->phy_index[nesdev->mac_index];
- } else {
- et_cmd->transceiver = XCVR_INTERNAL;
- et_cmd->supported = SUPPORTED_10000baseT_Full;
- et_cmd->advertising = ADVERTISED_10000baseT_Full;
- et_cmd->phy_address = nesdev->mac_index;
- }
- et_cmd->speed = SPEED_10000;
- et_cmd->autoneg = AUTONEG_DISABLE;
+ et_cmd->transceiver = XCVR_INTERNAL;
+ et_cmd->supported = SUPPORTED_10000baseT_Full;
+ et_cmd->advertising = ADVERTISED_10000baseT_Full;
+ et_cmd->phy_address = mac_index;
}
- et_cmd->maxtxpkt = 511;
- et_cmd->maxrxpkt = 511;
+ et_cmd->speed = SPEED_10000;
+ et_cmd->autoneg = AUTONEG_DISABLE;
return 0;
}
nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff;
else
nescq->hw_cq.cq_number = nesvnic->mcrq_qp_id + nes_ucontext->mcrqf-1;
+ nescq->mcrqf = nes_ucontext->mcrqf;
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
}
nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
+
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-EIO);
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX, opcode);
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX,
(nescq->hw_cq.cq_number | ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 16)));
- nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+ if (!nescq->mcrqf)
+ nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+
atomic_set(&cqp_request->refcount, 2);
nes_post_cqp_request(nesdev, cqp_request);
static u32 root_256(struct nes_device *nesdev,
struct nes_root_vpbl *root_vpbl,
struct nes_root_vpbl *new_root,
- u16 pbl_count_4k,
- u16 pbl_count_256)
+ u16 pbl_count_4k)
{
u64 leaf_pbl;
int i, j, k;
int ret;
struct nes_adapter *nesadapter = nesdev->nesadapter;
uint pg_cnt = 0;
- u16 pbl_count_256;
+ u16 pbl_count_256 = 0;
u16 pbl_count = 0;
u8 use_256_pbls = 0;
u8 use_4k_pbls = 0;
}
if (use_256_pbls && use_two_level) {
- if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k, pbl_count_256) == 1) {
+ if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k) == 1) {
if (new_root.pbl_pbase != 0)
root_vpbl = &new_root;
} else {
struct nes_root_vpbl root_vpbl;
u32 stag;
u32 i;
+ unsigned long mask;
u32 stag_index = 0;
u32 next_stag_index = 0;
u32 driver_key = 0;
return ERR_PTR(-E2BIG);
}
+ if ((buffer_list[0].addr ^ *iova_start) & ~PAGE_MASK)
+ return ERR_PTR(-EINVAL);
+
err = nes_alloc_resource(nesadapter, nesadapter->allocated_mrs, nesadapter->max_mr,
&stag_index, &next_stag_index);
if (err) {
root_pbl_index++;
cur_pbl_index = 0;
}
- if (buffer_list[i].addr & ~PAGE_MASK) {
- /* TODO: Unwind allocated buffers */
- nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
- nes_debug(NES_DBG_MR, "Unaligned Memory Buffer: 0x%x\n",
- (unsigned int) buffer_list[i].addr);
- ibmr = ERR_PTR(-EINVAL);
- kfree(nesmr);
- goto reg_phys_err;
- }
- if (!buffer_list[i].size) {
+ mask = !buffer_list[i].size;
+ if (i != 0)
+ mask |= buffer_list[i].addr;
+ if (i != num_phys_buf - 1)
+ mask |= buffer_list[i].addr + buffer_list[i].size;
+
+ if (mask & ~PAGE_MASK) {
nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
- nes_debug(NES_DBG_MR, "Invalid Buffer Size\n");
+ nes_debug(NES_DBG_MR, "Invalid buffer addr or size\n");
ibmr = ERR_PTR(-EINVAL);
kfree(nesmr);
goto reg_phys_err;
if ((buffer_list[i-1].addr+PAGE_SIZE) != buffer_list[i].addr)
single_page = 0;
}
- vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr);
+ vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr & PAGE_MASK);
vpbl.pbl_vbase[cur_pbl_index++].pa_high =
cpu_to_le32((u32)((((u64)buffer_list[i].addr) >> 32)));
}
" length = 0x%016lX, index = 0x%08X\n",
stag, (unsigned long)*iova_start, (unsigned long)region_length, stag_index);
- region_length -= (*iova_start)&PAGE_MASK;
-
/* Make the leaf PBL the root if only one PBL */
if (root_pbl_index == 1) {
root_vpbl.pbl_pbase = vpbl.pbl_pbase;
struct nes_vnic *nesvnic = nesibdev->nesvnic;
nes_debug(NES_DBG_INIT, "\n");
- return sprintf(buf, "%x.%x.%x\n",
- (int)(nesvnic->nesdev->nesadapter->fw_ver >> 32),
- (int)(nesvnic->nesdev->nesadapter->fw_ver >> 16) & 0xffff,
- (int)(nesvnic->nesdev->nesadapter->fw_ver & 0xffff));
+ return sprintf(buf, "%u.%u\n",
+ (nesvnic->nesdev->nesadapter->firmware_version >> 16),
+ (nesvnic->nesdev->nesadapter->firmware_version & 0x000000ff));
}
spinlock_t lock;
u8 virtual_cq;
u8 pad[3];
+ u32 mcrqf;
};
struct nes_wq {
queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
round_jiffies_relative(HZ));
- set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+ if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ napi_enable(&priv->napi);
return 0;
}
struct ipoib_tx_buf *tx_req;
int i;
- clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+ if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ napi_disable(&priv->napi);
ipoib_cm_dev_stop(dev);
ipoib_dbg(priv, "bringing up interface\n");
- if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
- napi_enable(&priv->napi);
+ set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
if (ipoib_pkey_dev_delay_open(dev))
return 0;
ipoib_ib_dev_stop(dev, 1);
err_disable:
- napi_disable(&priv->napi);
clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
return -EINVAL;
ipoib_dbg(priv, "stopping interface\n");
clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
- napi_disable(&priv->napi);
netif_stop_queue(dev);
*/
if (ppriv->pkey == pkey) {
result = -ENOTUNIQ;
+ priv = NULL;
goto err;
}
list_for_each_entry(priv, &ppriv->child_intfs, list) {
if (priv->pkey == pkey) {
result = -ENOTUNIQ;
+ priv = NULL;
goto err;
}
}
result = ipoib_set_dev_features(priv, ppriv->ca);
if (result)
- goto device_init_failed;
+ goto err;
priv->pkey = pkey;
ipoib_warn(ppriv, "failed to initialize subinterface: "
"device %s, port %d",
ppriv->ca->name, ppriv->port);
- goto device_init_failed;
+ goto err;
}
result = register_netdevice(priv->dev);
register_failed:
ipoib_dev_cleanup(priv->dev);
-device_init_failed:
- free_netdev(priv->dev);
-
err:
mutex_unlock(&ppriv->vlan_mutex);
rtnl_unlock();
+ if (priv)
+ free_netdev(priv->dev);
+
return result;
}
int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
{
struct ipoib_dev_priv *ppriv, *priv, *tpriv;
- int ret = -ENOENT;
+ struct net_device *dev = NULL;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
unregister_netdevice(priv->dev);
ipoib_dev_cleanup(priv->dev);
list_del(&priv->list);
- free_netdev(priv->dev);
-
- ret = 0;
+ dev = priv->dev;
break;
}
}
mutex_unlock(&ppriv->vlan_mutex);
rtnl_unlock();
- return ret;
+ if (dev) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ return -ENODEV;
}
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler= iscsi_eh_device_reset,
.eh_target_reset_handler= iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "iscsi_iser",
.this_id = -1,
*/
static void ml_combine_effects(struct ff_effect *effect,
struct ml_effect_state *state,
- int gain)
+ unsigned int gain)
{
struct ff_effect *new = state->effect;
unsigned int strong, weak, i;
static struct bus_type gameport_bus;
-static void gameport_add_driver(struct gameport_driver *drv);
static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
static void gameport_reconnect_port(struct gameport *gameport);
static void gameport_disconnect_port(struct gameport *gameport);
enum gameport_event_type {
GAMEPORT_REGISTER_PORT,
- GAMEPORT_REGISTER_DRIVER,
GAMEPORT_ATTACH_DRIVER,
};
gameport_add_port(event->object);
break;
- case GAMEPORT_REGISTER_DRIVER:
- gameport_add_driver(event->object);
+ case GAMEPORT_ATTACH_DRIVER:
+ gameport_attach_driver(event->object);
break;
default:
return 0;
}
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
{
int error;
- error = driver_register(&drv->driver);
+ error = driver_attach(&drv->driver);
if (error)
printk(KERN_ERR
- "gameport: driver_register() failed for %s, error: %d\n",
+ "gameport: driver_attach() failed for %s, error: %d\n",
drv->driver.name, error);
}
#define INPUT_DEVICES 256
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+ ABS_MT_TOUCH_MAJOR,
+ ABS_MT_TOUCH_MINOR,
+ ABS_MT_WIDTH_MAJOR,
+ ABS_MT_WIDTH_MINOR,
+ ABS_MT_ORIENTATION,
+ ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y,
+ ABS_MT_TOOL_TYPE,
+ ABS_MT_BLOB_ID,
+ ABS_MT_TRACKING_ID,
+ 0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
static LIST_HEAD(input_dev_list);
static LIST_HEAD(input_handler_list);
}
}
+static void input_stop_autorepeat(struct input_dev *dev)
+{
+ del_timer(&dev->timer);
+}
+
#define INPUT_IGNORE_EVENT 0
#define INPUT_PASS_TO_HANDLERS 1
#define INPUT_PASS_TO_DEVICE 2
disposition = INPUT_PASS_TO_HANDLERS;
}
break;
+ case SYN_MT_REPORT:
+ dev->sync = 0;
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
}
break;
__change_bit(code, dev->key);
if (value)
input_start_autorepeat(dev, code);
+ else
+ input_stop_autorepeat(dev);
}
disposition = INPUT_PASS_TO_HANDLERS;
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX)) {
+ if (test_bit(code, input_abs_bypass)) {
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
+ }
+
value = input_defuzz_abs_event(value,
dev->abs[code], dev->absfuzz[code]);
static unsigned int input_proc_devices_poll(struct file *file, poll_table *wait)
{
- int state = input_devices_state;
-
poll_wait(file, &input_devices_poll_wait, wait);
- if (state != input_devices_state)
+ if (file->f_version != input_devices_state) {
+ file->f_version = input_devices_state;
return POLLIN | POLLRDNORM;
+ }
return 0;
}
return error;
list_add_tail_rcu(&handle->d_node, &dev->h_list);
mutex_unlock(&dev->mutex);
- synchronize_rcu();
/*
* Since we are supposed to be called from ->connect()
.open = input_open_file,
};
+static void __init input_init_abs_bypass(void)
+{
+ const unsigned int *p;
+
+ for (p = input_abs_bypass_init_data; *p; p++)
+ input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
static int __init input_init(void)
{
int err;
+ input_init_abs_bypass();
+
err = class_register(&input_class);
if (err) {
printk(KERN_ERR "input: unable to register input_dev class\n");
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
- }, /* Avoid itouchpads, touchscreens and tablets */
+ }, /* Avoid itouchpads and touchscreens */
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+ }, /* Avoid tablets, digitisers and similar devices */
{ } /* Terminating entry */
};
/*
* System-specific ketymap fixup routine
*/
-static void (*atkbd_platform_fixup)(struct atkbd *);
+static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
+static void *atkbd_platform_fixup_data;
static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
ssize_t (*handler)(struct atkbd *, char *));
}
/*
- * Most special keys (Fn+F?) on Dell laptops do not generate release
- * events so we have to do it ourselves.
+ * generate release events for the keycodes given in data
*/
-static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd)
+static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd,
+ const void *data)
{
- static const unsigned int forced_release_keys[] = {
- 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93,
- };
- int i;
+ const unsigned int *keys = data;
+ unsigned int i;
if (atkbd->set == 2)
- for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
- __set_bit(forced_release_keys[i],
- atkbd->force_release_mask);
+ for (i = 0; keys[i] != -1U; i++)
+ __set_bit(keys[i], atkbd->force_release_mask);
}
+/*
+ * Most special keys (Fn+F?) on Dell laptops do not generate release
+ * events so we have to do it ourselves.
+ */
+static unsigned int atkbd_dell_laptop_forced_release_keys[] = {
+ 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U
+};
+
/*
* Perform fixup for HP system that doesn't generate release
* for its video switch
*/
-static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
-{
- static const unsigned int forced_release_keys[] = {
- 0x94,
- };
- int i;
-
- if (atkbd->set == 2)
- for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
- __set_bit(forced_release_keys[i],
- atkbd->force_release_mask);
-}
+static unsigned int atkbd_hp_forced_release_keys[] = {
+ 0x94, -1U
+};
/*
* Inventec system with broken key release on volume keys
*/
-static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
-{
- const unsigned int forced_release_keys[] = {
- 0xae, 0xb0,
- };
- int i;
-
- if (atkbd->set == 2)
- for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
- __set_bit(forced_release_keys[i],
- atkbd->force_release_mask);
-}
+static unsigned int atkbd_inventec_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
/*
* Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release
* for its volume buttons
*/
-static void atkbd_hp_zv6100_keymap_fixup(struct atkbd *atkbd)
-{
- const unsigned int forced_release_keys[] = {
- 0xae, 0xb0,
- };
- int i;
+static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
- if (atkbd->set == 2)
- for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
- __set_bit(forced_release_keys[i],
- atkbd->force_release_mask);
-}
+/*
+ * Samsung NC10,NC20 with Fn+F? key release not working
+ */
+static unsigned int atkbd_samsung_forced_release_keys[] = {
+ 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
+};
/*
- * Samsung NC10 with Fn+F? key release not working
+ * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop
+ * do not generate release events so we have to do it ourselves.
*/
-static void atkbd_samsung_keymap_fixup(struct atkbd *atkbd)
-{
- const unsigned int forced_release_keys[] = {
- 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9,
- };
- int i;
+static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
+ 0xb0, 0xae, -1U
+};
- if (atkbd->set == 2)
- for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
- __set_bit(forced_release_keys[i],
- atkbd->force_release_mask);
-}
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+ 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* Perform additional fixups
*/
if (atkbd_platform_fixup)
- atkbd_platform_fixup(atkbd);
+ atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data);
}
/*
return sprintf(buf, "%lu\n", atkbd->err_count);
}
-static int __init atkbd_setup_fixup(const struct dmi_system_id *id)
+static int __init atkbd_setup_forced_release(const struct dmi_system_id *id)
{
- atkbd_platform_fixup = id->driver_data;
+ atkbd_platform_fixup = atkbd_apply_forced_release_keylist;
+ atkbd_platform_fixup_data = id->driver_data;
+
return 0;
}
DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
},
- .callback = atkbd_setup_fixup,
- .driver_data = atkbd_dell_laptop_keymap_fixup,
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_dell_laptop_forced_release_keys,
},
{
.ident = "Dell Laptop",
DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */
},
- .callback = atkbd_setup_fixup,
- .driver_data = atkbd_dell_laptop_keymap_fixup,
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_dell_laptop_forced_release_keys,
},
{
.ident = "HP 2133",
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
},
- .callback = atkbd_setup_fixup,
- .driver_data = atkbd_hp_keymap_fixup,
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_forced_release_keys,
},
{
.ident = "HP Pavilion ZV6100",
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
},
- .callback = atkbd_setup_fixup,
- .driver_data = atkbd_hp_zv6100_keymap_fixup,
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_hp_zv6100_forced_release_keys,
},
{
.ident = "Inventec Symphony",
DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
},
- .callback = atkbd_setup_fixup,
- .driver_data = atkbd_inventec_keymap_fixup,
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_inventec_forced_release_keys,
},
{
.ident = "Samsung NC10",
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
DMI_MATCH(DMI_PRODUCT_NAME, "NC10"),
},
- .callback = atkbd_setup_fixup,
- .driver_data = atkbd_samsung_keymap_fixup,
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ .ident = "Samsung NC20",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ .ident = "Samsung SQ45S70S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ .ident = "Fujitsu Amilo PA 1510",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_pa1510_forced_release_keys,
+ },
+ {
+ .ident = "Fujitsu Amilo Xi 3650",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_xi3650_forced_release_keys,
},
{ }
};
if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
!pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
- printk(KERN_ERR DRV_NAME
- ": Invalid Debounce/Columdrive Time from pdata\n");
+ printk(KERN_WARNING DRV_NAME
+ ": Invalid Debounce/Columndrive Time in platform data\n");
bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */
} else {
bfin_write_KPAD_MSEL(
}
error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
- IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+ 0, DRV_NAME, pdev);
if (error) {
printk(KERN_ERR DRV_NAME
": unable to claim irq %d; error %d\n",
}
-/* initialise HIL */
-static int __init
-hil_keyb_init(void)
+/* initialize HIL */
+static int __devinit hil_keyb_init(void)
{
unsigned char c;
unsigned int i, kbid;
wait_queue_head_t hil_wait;
int err;
- if (hil_dev.dev) {
+ if (hil_dev.dev)
return -ENODEV; /* already initialized */
- }
+ init_waitqueue_head(&hil_wait);
spin_lock_init(&hil_dev.lock);
+
hil_dev.dev = input_allocate_device();
if (!hil_dev.dev)
return -ENOMEM;
-#if defined(CONFIG_HP300)
- if (!MACH_IS_HP300) {
- err = -ENODEV;
- goto err1;
- }
- if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
- printk(KERN_ERR "HIL: hardware register was not found\n");
- err = -ENODEV;
- goto err1;
- }
- if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
- printk(KERN_ERR "HIL: IOPORT region already used\n");
- err = -EIO;
- goto err1;
- }
-#endif
-
err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
if (err) {
printk(KERN_ERR "HIL: Can't get IRQ\n");
- goto err2;
+ goto err1;
}
/* Turn on interrupts */
hil_dev.valid = 0; /* clear any pending data */
hil_do(HIL_READKBDSADR, NULL, 0);
- init_waitqueue_head(&hil_wait);
- wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ);
- if (!hil_dev.valid) {
+ wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
+ if (!hil_dev.valid)
printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
- }
c = hil_dev.c;
hil_dev.valid = 0;
for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
if (hphilkeyb_keycode[i] != KEY_RESERVED)
- set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
+ __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);
hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
err = input_register_device(hil_dev.dev);
if (err) {
printk(KERN_ERR "HIL: Can't register device\n");
- goto err3;
+ goto err2;
}
+
printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);
return 0;
-err3:
+err2:
hil_do(HIL_INTOFF, NULL, 0);
- disable_irq(HIL_IRQ);
free_irq(HIL_IRQ, hil_dev.dev_id);
-err2:
-#if defined(CONFIG_HP300)
- release_region(HILBASE + HIL_DATA, 2);
err1:
-#endif
input_free_device(hil_dev.dev);
hil_dev.dev = NULL;
return err;
}
+static void __devexit hil_keyb_exit(void)
+{
+ if (HIL_IRQ)
+ free_irq(HIL_IRQ, hil_dev.dev_id);
+
+ /* Turn off interrupts */
+ hil_do(HIL_INTOFF, NULL, 0);
+
+ input_unregister_device(hil_dev.dev);
+ hil_dev.dev = NULL;
+}
#if defined(CONFIG_PARISC)
-static int __init
-hil_init_chip(struct parisc_device *dev)
+static int __devinit hil_probe_chip(struct parisc_device *dev)
{
+ /* Only allow one HIL keyboard */
+ if (hil_dev.dev)
+ return -ENODEV;
+
if (!dev->irq) {
- printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start);
+ printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
+ (void *)dev->hpa.start);
return -ENODEV;
}
return hil_keyb_init();
}
+static int __devexit hil_remove_chip(struct parisc_device *dev)
+{
+ hil_keyb_exit();
+
+ return 0;
+}
+
static struct parisc_device_id hil_tbl[] = {
{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
{ 0, }
};
+#if 0
+/* Disabled to avoid conflicts with the HP SDC HIL drivers */
MODULE_DEVICE_TABLE(parisc, hil_tbl);
+#endif
static struct parisc_driver hil_driver = {
- .name = "hil",
- .id_table = hil_tbl,
- .probe = hil_init_chip,
+ .name = "hil",
+ .id_table = hil_tbl,
+ .probe = hil_probe_chip,
+ .remove = __devexit_p(hil_remove_chip),
};
-#endif /* CONFIG_PARISC */
-
static int __init hil_init(void)
{
-#if defined(CONFIG_PARISC)
return register_parisc_driver(&hil_driver);
-#else
- return hil_keyb_init();
-#endif
}
-
static void __exit hil_exit(void)
{
- if (HIL_IRQ) {
- disable_irq(HIL_IRQ);
- free_irq(HIL_IRQ, hil_dev.dev_id);
+ unregister_parisc_driver(&hil_driver);
+}
+
+#else /* !CONFIG_PARISC */
+
+static int __init hil_init(void)
+{
+ int error;
+
+ /* Only allow one HIL keyboard */
+ if (hil_dev.dev)
+ return -EBUSY;
+
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+
+ if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
+ printk(KERN_ERR "HIL: hardware register was not found\n");
+ return -ENODEV;
}
- /* Turn off interrupts */
- hil_do(HIL_INTOFF, NULL, 0);
+ if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
+ printk(KERN_ERR "HIL: IOPORT region already used\n");
+ return -EIO;
+ }
- input_unregister_device(hil_dev.dev);
+ error = hil_keyb_init();
+ if (error) {
+ release_region(HILBASE + HIL_DATA, 2);
+ return error;
+ }
- hil_dev.dev = NULL;
+ return 0;
+}
-#if defined(CONFIG_PARISC)
- unregister_parisc_driver(&hil_driver);
-#else
- release_region(HILBASE+HIL_DATA, 2);
-#endif
+static void __exit hil_exit(void)
+{
+ hil_keyb_exit();
+ release_region(HILBASE + HIL_DATA, 2);
}
+#endif /* CONFIG_PARISC */
+
module_init(hil_init);
module_exit(hil_exit);
/* disable keyboard interrupt and schedule for handling */
if (cpu_is_omap24xx()) {
int i;
- for (i = 0; i < omap_kp->rows; i++)
- disable_irq(gpio_to_irq(row_gpios[i]));
+
+ for (i = 0; i < omap_kp->rows; i++) {
+ int gpio_irq = gpio_to_irq(row_gpios[i]);
+ /*
+ * The interrupt which we're currently handling should
+ * be disabled _nosync() to avoid deadlocks waiting
+ * for this handler to complete. All others should
+ * be disabled the regular way for SMP safety.
+ */
+ if (gpio_irq == irq)
+ disable_irq_nosync(gpio_irq);
+ else
+ disable_irq(gpio_irq);
+ }
} else
/* disable keyboard interrupt and schedule for handling */
omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
- depends on GSC || HP300
+ depends on (GSC || HP300) && SERIO
select HP_SDC
help
Say Y here if you want to support the built-in real time clock
Say Y to include support for delivering PMU events via input
layer on NXP PCF50633.
+config INPUT_GPIO_ROTARY_ENCODER
+ tristate "Rotary encoders connected to GPIO pins"
+ depends on GPIOLIB && GENERIC_GPIO
+ help
+ Say Y here to add support for rotary encoders connected to GPIO lines.
+ Check file:Documentation/incput/rotary_encoder.txt for more
+ information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rotary_encoder.
+
+config INPUT_RB532_BUTTON
+ tristate "Mikrotik Routerboard 532 button interface"
+ depends on MIKROTIK_RB532
+ depends on GPIOLIB && GENERIC_GPIO
+ select INPUT_POLLDEV
+ help
+ Say Y here if you want support for the S1 button built into
+ Mikrotik's Routerboard 532.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rb532_button.
+
endif
# Each configuration option enables a list of files.
-obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
-obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
-obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
-obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
-obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
-obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
+obj-$(CONFIG_INPUT_APANEL) += apanel.o
obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
-obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
-obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
-obj-$(CONFIG_INPUT_YEALINK) += yealink.o
+obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_CM109) += cm109.o
+obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
-obj-$(CONFIG_INPUT_UINPUT) += uinput.o
-obj-$(CONFIG_INPUT_APANEL) += apanel.o
-obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
+obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
+obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o
+obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o
+obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
+obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
+obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
+obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
+obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
+obj-$(CONFIG_INPUT_UINPUT) += uinput.o
+obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
+obj-$(CONFIG_INPUT_YEALINK) += yealink.o
* newly configured "channel".
*/
-static unsigned int channel_mask = 0xFFFF;
-module_param(channel_mask, uint, 0644);
+enum {
+ ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF,
+ ATI_REMOTE2_MAX_MODE_MASK = 0x1F,
+};
+
+static int ati_remote2_set_mask(const char *val,
+ struct kernel_param *kp, unsigned int max)
+{
+ unsigned long mask;
+ int ret;
+
+ if (!val)
+ return -EINVAL;
+
+ ret = strict_strtoul(val, 0, &mask);
+ if (ret)
+ return ret;
+
+ if (mask & ~max)
+ return -EINVAL;
+
+ *(unsigned int *)kp->arg = mask;
+
+ return 0;
+}
+
+static int ati_remote2_set_channel_mask(const char *val,
+ struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK);
+}
+
+static int ati_remote2_get_channel_mask(char *buffer, struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg);
+}
+
+static int ati_remote2_set_mode_mask(const char *val, struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK);
+}
+
+static int ati_remote2_get_mode_mask(char *buffer, struct kernel_param *kp)
+{
+ pr_debug("%s()\n", __func__);
+
+ return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg);
+}
+
+static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK;
+#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int)
+#define param_set_channel_mask ati_remote2_set_channel_mask
+#define param_get_channel_mask ati_remote2_get_channel_mask
+module_param(channel_mask, channel_mask, 0644);
MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
-static unsigned int mode_mask = 0x1F;
-module_param(mode_mask, uint, 0644);
+static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK;
+#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int)
+#define param_set_mode_mask ati_remote2_set_mode_mask
+#define param_get_mode_mask ati_remote2_get_mode_mask
+module_param(mode_mask, mode_mask, 0644);
MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
static struct usb_device_id ati_remote2_id_table[] = {
u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)];
unsigned int flags;
+
+ unsigned int channel_mask;
+ unsigned int mode_mask;
};
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id);
static void ati_remote2_disconnect(struct usb_interface *interface);
static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message);
static int ati_remote2_resume(struct usb_interface *interface);
+static int ati_remote2_reset_resume(struct usb_interface *interface);
+static int ati_remote2_pre_reset(struct usb_interface *interface);
+static int ati_remote2_post_reset(struct usb_interface *interface);
static struct usb_driver ati_remote2_driver = {
.name = "ati_remote2",
.id_table = ati_remote2_id_table,
.suspend = ati_remote2_suspend,
.resume = ati_remote2_resume,
+ .reset_resume = ati_remote2_reset_resume,
+ .pre_reset = ati_remote2_pre_reset,
+ .post_reset = ati_remote2_post_reset,
.supports_autosuspend = 1,
};
channel = data[0] >> 4;
- if (!((1 << channel) & channel_mask))
+ if (!((1 << channel) & ar2->channel_mask))
return;
mode = data[0] & 0x0F;
return;
}
- if (!((1 << mode) & mode_mask))
+ if (!((1 << mode) & ar2->mode_mask))
return;
input_event(idev, EV_REL, REL_X, (s8) data[1]);
channel = data[0] >> 4;
- if (!((1 << channel) & channel_mask))
+ if (!((1 << channel) & ar2->channel_mask))
return;
mode = data[0] & 0x0F;
ar2->mode = mode;
}
- if (!((1 << mode) & mode_mask))
+ if (!((1 << mode) & ar2->mode_mask))
return;
index = ati_remote2_lookup(hw_code);
int index, mode;
mode = scancode >> 8;
- if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
+ if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
return -EINVAL;
index = ati_remote2_lookup(scancode & 0xFF);
int index, mode, old_keycode;
mode = scancode >> 8;
- if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask))
+ if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask))
return -EINVAL;
index = ati_remote2_lookup(scancode & 0xFF);
}
}
-static int ati_remote2_setup(struct ati_remote2 *ar2)
+static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask)
{
int r, i, channel;
channel = 0;
for (i = 0; i < 16; i++) {
- if ((1 << i) & channel_mask) {
- if (!(~(1 << i) & 0xFFFF & channel_mask))
+ if ((1 << i) & ch_mask) {
+ if (!(~(1 << i) & ch_mask))
channel = i + 1;
break;
}
return 0;
}
+static ssize_t ati_remote2_show_channel_mask(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+
+ return sprintf(buf, "0x%04x\n", ar2->channel_mask);
+}
+
+static ssize_t ati_remote2_store_channel_mask(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+ unsigned long mask;
+ int r;
+
+ if (strict_strtoul(buf, 0, &mask))
+ return -EINVAL;
+
+ if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK)
+ return -EINVAL;
+
+ r = usb_autopm_get_interface(ar2->intf[0]);
+ if (r) {
+ dev_err(&ar2->intf[0]->dev,
+ "%s(): usb_autopm_get_interface() = %d\n", __func__, r);
+ return r;
+ }
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (mask != ar2->channel_mask && !ati_remote2_setup(ar2, mask))
+ ar2->channel_mask = mask;
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ usb_autopm_put_interface(ar2->intf[0]);
+
+ return count;
+}
+
+static ssize_t ati_remote2_show_mode_mask(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+
+ return sprintf(buf, "0x%02x\n", ar2->mode_mask);
+}
+
+static ssize_t ati_remote2_store_mode_mask(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ struct usb_interface *intf = usb_ifnum_to_if(udev, 0);
+ struct ati_remote2 *ar2 = usb_get_intfdata(intf);
+ unsigned long mask;
+
+ if (strict_strtoul(buf, 0, &mask))
+ return -EINVAL;
+
+ if (mask & ~ATI_REMOTE2_MAX_MODE_MASK)
+ return -EINVAL;
+
+ ar2->mode_mask = mask;
+
+ return count;
+}
+
+static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask,
+ ati_remote2_store_channel_mask);
+
+static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask,
+ ati_remote2_store_mode_mask);
+
+static struct attribute *ati_remote2_attrs[] = {
+ &dev_attr_channel_mask.attr,
+ &dev_attr_mode_mask.attr,
+ NULL,
+};
+
+static struct attribute_group ati_remote2_attr_group = {
+ .attrs = ati_remote2_attrs,
+};
+
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
if (r)
goto fail2;
- r = ati_remote2_setup(ar2);
+ ar2->channel_mask = channel_mask;
+ ar2->mode_mask = mode_mask;
+
+ r = ati_remote2_setup(ar2, ar2->channel_mask);
if (r)
goto fail2;
strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name));
- r = ati_remote2_input_init(ar2);
+ r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group);
if (r)
goto fail2;
+ r = ati_remote2_input_init(ar2);
+ if (r)
+ goto fail3;
+
usb_set_intfdata(interface, ar2);
interface->needs_remote_wakeup = 1;
return 0;
+ fail3:
+ sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group);
fail2:
ati_remote2_urb_cleanup(ar2);
-
usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
fail1:
kfree(ar2);
input_unregister_device(ar2->idev);
+ sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group);
+
ati_remote2_urb_cleanup(ar2);
usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]);
return r;
}
+static int ati_remote2_reset_resume(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ r = ati_remote2_setup(ar2, ar2->channel_mask);
+ if (r)
+ goto out;
+
+ if (ar2->flags & ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ if (!r)
+ ar2->flags &= ~ATI_REMOTE2_SUSPENDED;
+
+ out:
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
+static int ati_remote2_pre_reset(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ mutex_lock(&ati_remote2_mutex);
+
+ if (ar2->flags == ATI_REMOTE2_OPENED)
+ ati_remote2_kill_urbs(ar2);
+
+ return 0;
+}
+
+static int ati_remote2_post_reset(struct usb_interface *interface)
+{
+ struct ati_remote2 *ar2;
+ struct usb_host_interface *alt = interface->cur_altsetting;
+ int r = 0;
+
+ if (alt->desc.bInterfaceNumber)
+ return 0;
+
+ ar2 = usb_get_intfdata(interface);
+
+ dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__);
+
+ if (ar2->flags == ATI_REMOTE2_OPENED)
+ r = ati_remote2_submit_urbs(ar2);
+
+ mutex_unlock(&ati_remote2_mutex);
+
+ return r;
+}
+
static int __init ati_remote2_init(void)
{
int r;
--- /dev/null
+/*
+ * Support for the S1 button on Routerboard 532
+ *
+ * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org>
+ */
+
+#include <linux/input-polldev.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-rc32434/gpio.h>
+#include <asm/mach-rc32434/rb.h>
+
+#define DRV_NAME "rb532-button"
+
+#define RB532_BTN_RATE 100 /* msec */
+#define RB532_BTN_KSYM BTN_0
+
+/* The S1 button state is provided by GPIO pin 1. But as this
+ * pin is also used for uart input as alternate function, the
+ * operational modes must be switched first:
+ * 1) disable uart using set_latch_u5()
+ * 2) turn off alternate function implicitly through
+ * gpio_direction_input()
+ * 3) read the GPIO's current value
+ * 4) undo step 2 by enabling alternate function (in this
+ * mode the GPIO direction is fixed, so no change needed)
+ * 5) turn on uart again
+ * The GPIO value occurs to be inverted, so pin high means
+ * button is not pressed.
+ */
+static bool rb532_button_pressed(void)
+{
+ int val;
+
+ set_latch_u5(0, LO_FOFF);
+ gpio_direction_input(GPIO_BTN_S1);
+
+ val = gpio_get_value(GPIO_BTN_S1);
+
+ rb532_gpio_set_func(GPIO_BTN_S1);
+ set_latch_u5(LO_FOFF, 0);
+
+ return !val;
+}
+
+static void rb532_button_poll(struct input_polled_dev *poll_dev)
+{
+ input_report_key(poll_dev->input, RB532_BTN_KSYM,
+ rb532_button_pressed());
+ input_sync(poll_dev->input);
+}
+
+static int __devinit rb532_button_probe(struct platform_device *pdev)
+{
+ struct input_polled_dev *poll_dev;
+ int error;
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev)
+ return -ENOMEM;
+
+ poll_dev->poll = rb532_button_poll;
+ poll_dev->poll_interval = RB532_BTN_RATE;
+
+ poll_dev->input->name = "rb532 button";
+ poll_dev->input->phys = "rb532/button0";
+ poll_dev->input->id.bustype = BUS_HOST;
+ poll_dev->input->dev.parent = &pdev->dev;
+
+ dev_set_drvdata(&pdev->dev, poll_dev);
+
+ input_set_capability(poll_dev->input, EV_KEY, RB532_BTN_KSYM);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ input_free_polled_device(poll_dev);
+ return error;
+ }
+
+ return 0;
+}
+
+static int __devexit rb532_button_remove(struct platform_device *pdev)
+{
+ struct input_polled_dev *poll_dev = dev_get_drvdata(&pdev->dev);
+
+ input_unregister_polled_device(poll_dev);
+ input_free_polled_device(poll_dev);
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver rb532_button_driver = {
+ .probe = rb532_button_probe,
+ .remove = __devexit_p(rb532_button_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init rb532_button_init(void)
+{
+ return platform_driver_register(&rb532_button_driver);
+}
+
+static void __exit rb532_button_exit(void)
+{
+ platform_driver_unregister(&rb532_button_driver);
+}
+
+module_init(rb532_button_init);
+module_exit(rb532_button_exit);
+
+MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Support for S1 button on Routerboard 532");
+MODULE_ALIAS("platform:" DRV_NAME);
--- /dev/null
+/*
+ * rotary_encoder.c
+ *
+ * (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * state machine code inspired by code from Tim Ruetz
+ *
+ * A generic driver for rotary encoders connected to GPIO lines.
+ * See file:Documentation/input/rotary_encoder.txt for more information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/rotary_encoder.h>
+
+#define DRV_NAME "rotary-encoder"
+
+struct rotary_encoder {
+ unsigned int irq_a;
+ unsigned int irq_b;
+ unsigned int pos;
+ unsigned int armed;
+ unsigned int dir;
+ struct input_dev *input;
+ struct rotary_encoder_platform_data *pdata;
+};
+
+static irqreturn_t rotary_encoder_irq(int irq, void *dev_id)
+{
+ struct rotary_encoder *encoder = dev_id;
+ struct rotary_encoder_platform_data *pdata = encoder->pdata;
+ int a = !!gpio_get_value(pdata->gpio_a);
+ int b = !!gpio_get_value(pdata->gpio_b);
+ int state;
+
+ a ^= pdata->inverted_a;
+ b ^= pdata->inverted_b;
+ state = (a << 1) | b;
+
+ switch (state) {
+
+ case 0x0:
+ if (!encoder->armed)
+ break;
+
+ if (encoder->dir) {
+ /* turning counter-clockwise */
+ encoder->pos += pdata->steps;
+ encoder->pos--;
+ encoder->pos %= pdata->steps;
+ } else {
+ /* turning clockwise */
+ encoder->pos++;
+ encoder->pos %= pdata->steps;
+ }
+
+ input_report_abs(encoder->input, pdata->axis, encoder->pos);
+ input_sync(encoder->input);
+
+ encoder->armed = 0;
+ break;
+
+ case 0x1:
+ case 0x2:
+ if (encoder->armed)
+ encoder->dir = state - 1;
+ break;
+
+ case 0x3:
+ encoder->armed = 1;
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit rotary_encoder_probe(struct platform_device *pdev)
+{
+ struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+ struct rotary_encoder *encoder;
+ struct input_dev *input;
+ int err;
+
+ if (!pdata || !pdata->steps) {
+ dev_err(&pdev->dev, "invalid platform data\n");
+ return -ENOENT;
+ }
+
+ encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!encoder || !input) {
+ dev_err(&pdev->dev, "failed to allocate memory for device\n");
+ err = -ENOMEM;
+ goto exit_free_mem;
+ }
+
+ encoder->input = input;
+ encoder->pdata = pdata;
+ encoder->irq_a = gpio_to_irq(pdata->gpio_a);
+ encoder->irq_b = gpio_to_irq(pdata->gpio_b);
+
+ /* create and register the input driver */
+ input->name = pdev->name;
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = &pdev->dev;
+ input->evbit[0] = BIT_MASK(EV_ABS);
+ input_set_abs_params(encoder->input,
+ pdata->axis, 0, pdata->steps, 0, 1);
+
+ err = input_register_device(input);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ goto exit_free_mem;
+ }
+
+ /* request the GPIOs */
+ err = gpio_request(pdata->gpio_a, DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "unable to request GPIO %d\n",
+ pdata->gpio_a);
+ goto exit_unregister_input;
+ }
+
+ err = gpio_request(pdata->gpio_b, DRV_NAME);
+ if (err) {
+ dev_err(&pdev->dev, "unable to request GPIO %d\n",
+ pdata->gpio_b);
+ goto exit_free_gpio_a;
+ }
+
+ /* request the IRQs */
+ err = request_irq(encoder->irq_a, &rotary_encoder_irq,
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+ DRV_NAME, encoder);
+ if (err) {
+ dev_err(&pdev->dev, "unable to request IRQ %d\n",
+ encoder->irq_a);
+ goto exit_free_gpio_b;
+ }
+
+ err = request_irq(encoder->irq_b, &rotary_encoder_irq,
+ IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+ DRV_NAME, encoder);
+ if (err) {
+ dev_err(&pdev->dev, "unable to request IRQ %d\n",
+ encoder->irq_b);
+ goto exit_free_irq_a;
+ }
+
+ platform_set_drvdata(pdev, encoder);
+
+ return 0;
+
+exit_free_irq_a:
+ free_irq(encoder->irq_a, encoder);
+exit_free_gpio_b:
+ gpio_free(pdata->gpio_b);
+exit_free_gpio_a:
+ gpio_free(pdata->gpio_a);
+exit_unregister_input:
+ input_unregister_device(input);
+ input = NULL; /* so we don't try to free it */
+exit_free_mem:
+ input_free_device(input);
+ kfree(encoder);
+ return err;
+}
+
+static int __devexit rotary_encoder_remove(struct platform_device *pdev)
+{
+ struct rotary_encoder *encoder = platform_get_drvdata(pdev);
+ struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data;
+
+ free_irq(encoder->irq_a, encoder);
+ free_irq(encoder->irq_b, encoder);
+ gpio_free(pdata->gpio_a);
+ gpio_free(pdata->gpio_b);
+ input_unregister_device(encoder->input);
+ platform_set_drvdata(pdev, NULL);
+ kfree(encoder);
+
+ return 0;
+}
+
+static struct platform_driver rotary_encoder_driver = {
+ .probe = rotary_encoder_probe,
+ .remove = __devexit_p(rotary_encoder_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init rotary_encoder_init(void)
+{
+ return platform_driver_register(&rotary_encoder_driver);
+}
+
+static void __exit rotary_encoder_exit(void)
+{
+ platform_driver_unregister(&rotary_encoder_driver);
+}
+
+module_init(rotary_encoder_init);
+module_exit(rotary_encoder_exit);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("GPIO rotary encoder driver");
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_LICENSE("GPL v2");
+
help
Say Y here to support PXA930 Trackball mouse.
+config MOUSE_MAPLE
+ tristate "Maple mouse (for the Dreamcast)"
+ depends on MAPLE
+ help
+ This driver supports the Maple mouse on the SEGA Dreamcast.
+
+ Most Dreamcast users, who have a mouse, will say Y here.
+
+ To compile this driver as a module choose M here: the module will be
+ called maplemouse.
+
endif
obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o
obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
-obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
-obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
+obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
+obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
+obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o
+obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o
obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o
obj-$(CONFIG_MOUSE_PS2) += psmouse.o
obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o
+obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o
-obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o
obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o
-obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o
psmouse-objs := psmouse-base.o synaptics.o
#define ALPS_FW_BK_2 0x40
static const struct alps_model_info alps_model_data[] = {
+ { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
{ { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
{ { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
{ { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
*/
static int atp_geyser_init(struct usb_device *udev)
{
- char data[8];
+ char *data;
int size;
int i;
+ int ret;
+
+ data = kmalloc(8, GFP_KERNEL);
+ if (!data) {
+ err("Out of memory");
+ return -ENOMEM;
+ }
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: read error\n");
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to read mode from device.");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
/* Apply the mode switch */
ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: write error\n");
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to request geyser raw mode");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
- return 0;
+ ret = 0;
+out_free:
+ kfree(data);
+ return ret;
}
/*
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+/* Macbook5,1 (unibody), aka wellspring3 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+ /* Macbook5,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
/* Terminating entry */
{}
};
u8 rel_y; /* relative y coordinate */
};
-/* trackpad header structure */
-struct tp_header {
- u8 unknown1[16]; /* constants, timers, etc */
- u8 fingers; /* number of fingers on trackpad */
- u8 unknown2[9]; /* constants, timers, etc */
+/* trackpad header types */
+enum tp_type {
+ TYPE1, /* plain trackpad */
+ TYPE2 /* button integrated in trackpad */
};
-/* trackpad finger structure */
+/* trackpad finger data offsets, le16-aligned */
+#define FINGER_TYPE1 (13 * sizeof(__le16))
+#define FINGER_TYPE2 (15 * sizeof(__le16))
+
+/* trackpad button data offsets */
+#define BUTTON_TYPE2 15
+
+/* list of device capability bits */
+#define HAS_INTEGRATED_BUTTON 1
+
+/* trackpad finger structure, le16-aligned */
struct tp_finger {
__le16 origin; /* zero when switching track finger */
__le16 abs_x; /* absolute x coodinate */
__le16 force_minor; /* trackpad force, minor axis? */
__le16 unused[3]; /* zeros */
__le16 multi; /* one finger: varies, more fingers: constant */
-};
+} __attribute__((packed,aligned(2)));
-/* trackpad data structure, empirically at least ten fingers */
-struct tp_data {
- struct tp_header header;
- struct tp_finger finger[16];
-};
+/* trackpad finger data size, empirically at least ten fingers */
+#define SIZEOF_FINGER sizeof(struct tp_finger)
+#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
/* device-specific parameters */
struct bcm5974_param {
/* device-specific configuration */
struct bcm5974_config {
int ansi, iso, jis; /* the product id of this device */
+ int caps; /* device capability bitmask */
int bt_ep; /* the endpoint of the button interface */
int bt_datalen; /* data length of the button interface */
int tp_ep; /* the endpoint of the trackpad interface */
+ enum tp_type tp_type; /* type of trackpad interface */
+ int tp_offset; /* offset to trackpad finger data */
int tp_datalen; /* data length of the trackpad interface */
struct bcm5974_param p; /* finger pressure limits */
struct bcm5974_param w; /* finger width limits */
struct urb *bt_urb; /* button usb request block */
struct bt_data *bt_data; /* button transferred data */
struct urb *tp_urb; /* trackpad usb request block */
- struct tp_data *tp_data; /* trackpad transferred data */
+ u8 *tp_data; /* trackpad transferred data */
int fingers; /* number of fingers on trackpad */
};
USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4460, 5166 },
+ { DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
+ },
{}
};
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
}
if (size != sizeof(struct bt_data))
return -EIO;
+ dprintk(7,
+ "bcm5974: button data: %x %x %x %x\n",
+ dev->bt_data->unknown1, dev->bt_data->button,
+ dev->bt_data->rel_x, dev->bt_data->rel_y);
+
input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
input_sync(dev->input);
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
- const struct tp_finger *f = dev->tp_data->finger;
+ const struct tp_finger *f;
struct input_dev *input = dev->input;
- const int fingers = (size - 26) / 28;
- int raw_p, raw_w, raw_x, raw_y;
- int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+ int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
- if (size < 26 || (size - 26) % 28 != 0)
+ if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
return -EIO;
+ /* finger data, le16-aligned */
+ f = (const struct tp_finger *)(dev->tp_data + c->tp_offset);
+ raw_n = (size - c->tp_offset) / SIZEOF_FINGER;
+
/* always track the first finger; when detached, start over */
- if (fingers) {
+ if (raw_n) {
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
raw_y = raw2int(f->abs_y);
dprintk(9,
- "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
- raw_p, raw_w, raw_x, raw_y);
+ "bcm5974: "
+ "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ raw_p, raw_w, raw_x, raw_y, raw_n);
ptest = int2bound(&c->p, raw_p);
origin = raw2int(f->origin);
+
+ /* set the integrated button if applicable */
+ if (c->tp_type == TYPE2)
+ ibt = raw2int(dev->tp_data[BUTTON_TYPE2]);
}
/* while tracking finger still valid, count all fingers */
abs_w = int2bound(&c->w, raw_w);
abs_x = int2bound(&c->x, raw_x - c->x.devmin);
abs_y = int2bound(&c->y, c->y.devmax - raw_y);
- for (; f != dev->tp_data->finger + fingers; f++) {
+ while (raw_n--) {
ptest = int2bound(&c->p, raw2int(f->force_major));
if (ptest > PRESSURE_LOW)
nmax++;
if (ptest > PRESSURE_HIGH)
nmin++;
+ f++;
}
}
input_report_key(input, BTN_TOUCH, dev->fingers > 0);
input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
- input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3);
+ input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3);
input_report_abs(input, ABS_PRESSURE, abs_p);
input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
dprintk(8,
"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
- "nmin: %d nmax: %d n: %d\n",
- abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+ "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+ abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
}
+ /* type 2 reports button events via ibt only */
+ if (c->tp_type == TYPE2)
+ input_report_key(input, BTN_LEFT, ibt);
+
input_sync(input);
return 0;
input_dev->name = "bcm5974";
input_dev->phys = dev->phys;
usb_to_input_id(dev->udev, &input_dev->id);
+ /* report driver capabilities via the version field */
+ input_dev->id.version = cfg->caps;
input_dev->dev.parent = &iface->dev;
input_set_drvdata(input_dev, dev);
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-200
8 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-200
9 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
+ static int old_fingers;
if (etd->fw_version_maj == 0x01) {
/* byte 0: D U p1 p2 1 p3 R L
fingers = (packet[0] & 0xc0) >> 6;
}
+ if (etd->jumpy_cursor) {
+ /* Discard packets that are likely to have bogus coordinates */
+ if (fingers > old_fingers) {
+ elantech_debug("elantech.c: discarding packet\n");
+ goto discard_packet_v1;
+ }
+ }
+
input_report_key(dev, BTN_TOUCH, fingers != 0);
/* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
}
input_sync(dev);
+
+ discard_packet_v1:
+ old_fingers = fingers;
}
/*
rc = -1;
break;
}
+ }
+
+ if (rc == 0) {
/*
- * Read back reg 0x10. The touchpad is probably initalising
- * and not ready until we read back the value we just wrote.
+ * Read back reg 0x10. For hardware version 1 we must make
+ * sure the absolute mode bit is set. For hardware version 2
+ * the touchpad is probably initalising and not ready until
+ * we read back the value we just wrote.
*/
do {
rc = elantech_read_reg(psmouse, 0x10, &val);
break;
tries--;
elantech_debug("elantech.c: retrying read (%d).\n",
- tries);
+ tries);
msleep(ETP_READ_BACK_DELAY);
} while (tries > 0);
- if (rc)
+
+ if (rc) {
pr_err("elantech.c: failed to read back register 0x10.\n");
- break;
+ } else if (etd->hw_version == 1 &&
+ !(val & ETP_R10_ABSOLUTE_MODE)) {
+ pr_err("elantech.c: touchpad refuses "
+ "to switch to absolute mode.\n");
+ rc = -1;
+ }
}
if (rc)
param[0], param[1], param[2]);
etd->capabilities = param[0];
+ /*
+ * This firmware seems to suffer from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+ pr_info("elantech.c: firmware version 2.34 detected, "
+ "enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = 1;
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
goto init_fail;
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-200
8 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-200
9 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
unsigned char fw_version_min;
unsigned char hw_version;
unsigned char paritycheck;
+ unsigned char jumpy_cursor;
unsigned char parity[256];
};
return -EIO;
}
- hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]);
+ hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]);
/* HGPK signature: 0x67, 0x00, 0x<model> */
if (param[0] != 0x67 || param[1] != 0x00)
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
+ {
+ .ident = "Lifebook B-2130",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
+ },
+ },
{
.ident = "Lifebook B213x/B2150",
.matches = {
--- /dev/null
+/*
+ * SEGA Dreamcast mouse driver
+ * Based on drivers/usb/usbmouse.c
+ *
+ * Copyright (c) Yaegashi Takeshi, 2001
+ * Copyright (c) Adrian McMenamin, 2008 - 2009
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/maple.h>
+
+MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
+MODULE_DESCRIPTION("SEGA Dreamcast mouse driver");
+MODULE_LICENSE("GPL");
+
+struct dc_mouse {
+ struct input_dev *dev;
+ struct maple_device *mdev;
+};
+
+static void dc_mouse_callback(struct mapleq *mq)
+{
+ int buttons, relx, rely, relz;
+ struct maple_device *mapledev = mq->dev;
+ struct dc_mouse *mse = maple_get_drvdata(mapledev);
+ struct input_dev *dev = mse->dev;
+ unsigned char *res = mq->recvbuf->buf;
+
+ buttons = ~res[8];
+ relx = *(unsigned short *)(res + 12) - 512;
+ rely = *(unsigned short *)(res + 14) - 512;
+ relz = *(unsigned short *)(res + 16) - 512;
+
+ input_report_key(dev, BTN_LEFT, buttons & 4);
+ input_report_key(dev, BTN_MIDDLE, buttons & 9);
+ input_report_key(dev, BTN_RIGHT, buttons & 2);
+ input_report_rel(dev, REL_X, relx);
+ input_report_rel(dev, REL_Y, rely);
+ input_report_rel(dev, REL_WHEEL, relz);
+ input_sync(dev);
+}
+
+static int dc_mouse_open(struct input_dev *dev)
+{
+ struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
+
+ maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50,
+ MAPLE_FUNC_MOUSE);
+
+ return 0;
+}
+
+static void dc_mouse_close(struct input_dev *dev)
+{
+ struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
+
+ maple_getcond_callback(mse->mdev, dc_mouse_callback, 0,
+ MAPLE_FUNC_MOUSE);
+}
+
+/* allow the mouse to be used */
+static int __devinit probe_maple_mouse(struct device *dev)
+{
+ struct maple_device *mdev = to_maple_dev(dev);
+ struct maple_driver *mdrv = to_maple_driver(dev->driver);
+ int error;
+ struct input_dev *input_dev;
+ struct dc_mouse *mse;
+
+ mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL);
+ if (!mse) {
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ error = -ENOMEM;
+ goto fail_nomem;
+ }
+
+ mse->dev = input_dev;
+ mse->mdev = mdev;
+
+ input_set_drvdata(input_dev, mse);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) |
+ BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
+ input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
+ BIT_MASK(REL_WHEEL);
+ input_dev->open = dc_mouse_open;
+ input_dev->close = dc_mouse_close;
+ input_dev->name = mdev->product_name;
+ input_dev->id.bustype = BUS_HOST;
+ error = input_register_device(input_dev);
+ if (error)
+ goto fail_register;
+
+ mdev->driver = mdrv;
+ maple_set_drvdata(mdev, mse);
+
+ return error;
+
+fail_register:
+ input_free_device(input_dev);
+fail_nomem:
+ kfree(mse);
+fail:
+ return error;
+}
+
+static int __devexit remove_maple_mouse(struct device *dev)
+{
+ struct maple_device *mdev = to_maple_dev(dev);
+ struct dc_mouse *mse = maple_get_drvdata(mdev);
+
+ mdev->callback = NULL;
+ input_unregister_device(mse->dev);
+ maple_set_drvdata(mdev, NULL);
+ kfree(mse);
+
+ return 0;
+}
+
+static struct maple_driver dc_mouse_driver = {
+ .function = MAPLE_FUNC_MOUSE,
+ .drv = {
+ .name = "Dreamcast_mouse",
+ .probe = probe_maple_mouse,
+ .remove = __devexit_p(remove_maple_mouse),
+ },
+};
+
+static int __init dc_mouse_init(void)
+{
+ return maple_driver_register(&dc_mouse_driver);
+}
+
+static void __exit dc_mouse_exit(void)
+{
+ maple_driver_unregister(&dc_mouse_driver);
+}
+
+module_init(dc_mouse_init);
+module_exit(dc_mouse_exit);
*/
static int __init pc110pad_init(void)
{
- struct pci_dev *dev;
int err;
- dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL);
- if (dev) {
- pci_dev_put(dev);
+ if (!no_pci_devices())
return -ENODEV;
- }
if (!request_region(pc110pad_io, 4, "pc110pad")) {
printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n",
clk_disable(kmi->clk);
}
-static int amba_kmi_probe(struct amba_device *dev, void *id)
+static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
{
struct amba_kmi_port *kmi;
struct serio *io;
MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
static struct parisc_driver hp_sdc_driver = {
.name = "hp_sdc",
#if defined(__hppa__)
+static void request_module_delayed(struct work_struct *work)
+{
+ request_module("hp_sdc_mlc");
+}
+
static int __init hp_sdc_init_hppa(struct parisc_device *d)
{
+ int ret;
+
if (!d)
return 1;
if (hp_sdc.dev != NULL)
hp_sdc.data_io = d->hpa.start + 0x800;
hp_sdc.status_io = d->hpa.start + 0x801;
- return hp_sdc_init();
+ INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+ ret = hp_sdc_init();
+ /* after sucessfull initialization give SDC some time to settle
+ * and then load the hp_sdc_mlc upper layer driver */
+ if (!ret)
+ schedule_delayed_work(&moduleloader_work,
+ msecs_to_jiffies(2000));
+
+ return ret;
}
#endif /* __hppa__ */
static void hp_sdc_exit(void)
{
+ /* do nothing if we don't have a SDC */
+ if (!hp_sdc.dev)
+ return;
+
write_lock_irq(&hp_sdc.lock);
/* Turn off all maskable "sub-function" irq's. */
tasklet_kill(&hp_sdc.task);
#if defined(__hppa__)
+ cancel_delayed_work_sync(&moduleloader_work);
if (unregister_parisc_driver(&hp_sdc_driver))
printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
#endif
DMI_MATCH(DMI_PRODUCT_VERSION, "01"),
},
},
+ {
+ .ident = "HP DV9700",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"),
+ },
+ },
{ }
};
{ }
};
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+ {
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ },
+ },
+ {
+ .ident = "LG Electronics X110",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "X110"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+ },
+ },
+ { }
+};
+
#ifdef CONFIG_PNP
static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
{
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
},
},
+ {
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ },
+ },
{ }
};
#endif
#endif
#ifdef CONFIG_X86
+ if (dmi_check_system(i8042_dmi_reset_table))
+ i8042_reset = 1;
+
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = 1;
static int i8042_controller_selftest(void)
{
unsigned char param;
+ int i = 0;
if (!i8042_reset)
return 0;
- if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
- printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
- return -ENODEV;
- }
+ /*
+ * We try this 5 times; on some really fragile systems this does not
+ * take the first time...
+ */
+ do {
+
+ if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
+ printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+ return -ENODEV;
+ }
+
+ if (param == I8042_RET_CTL_TEST)
+ return 0;
- if (param != I8042_RET_CTL_TEST) {
printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
- param, I8042_RET_CTL_TEST);
- return -EIO;
- }
+ param, I8042_RET_CTL_TEST);
+ msleep(50);
+ } while (i++ < 5);
+#ifdef CONFIG_X86
+ /*
+ * On x86, we don't fail entire i8042 initialization if controller
+ * reset fails in hopes that keyboard port will still be functional
+ * and user will still get a working keyboard. This is especially
+ * important on netbooks. On other arches we trust hardware more.
+ */
+ printk(KERN_INFO
+ "i8042: giving up on controller selftest, continuing anyway...\n");
return 0;
+#else
+ return -EIO;
+#endif
}
/*
timeout = wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD1), timeout);
- if (ps2dev->cmdcnt && timeout > 0) {
+ if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
timeout = ps2_adjust_timeout(ps2dev, command, timeout);
wait_event_timeout(ps2dev->wait,
spin_lock(&ps2if->lock);
status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
if (ps2if->head == ps2if->tail) {
- disable_irq(irq);
+ disable_irq_nosync(irq);
/* done */
} else if (status & PS2STAT_TXE) {
sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-200
8 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-200
9 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
* v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
+ * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.49"
+#define DRIVER_VERSION "v1.50"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
5000); /* 5 secs */
} while (result < 0 && limit++ < 5);
+ /* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
goto out;
}
}
- result = 0;
-
out:
+ result = 0;
kfree(report);
return result;
}
endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ /* Initialize touch_x_max and touch_y_max in case it is not defined */
+ if (wacom_wac->features->type == TABLETPC) {
+ features->touch_x_max = 1023;
+ features->touch_y_max = 1023;
+ } else {
+ features->touch_x_max = 0;
+ features->touch_y_max = 0;
+ }
+
/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
if (wacom_wac->features->type == TABLETPC) {
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
To compile this driver as a module, choose M here: the
module will be called ads7846.
+config TOUCHSCREEN_AD7877
+ tristate "AD7877 based touchscreens"
+ depends on SPI_MASTER
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7877 controller, and your board-specific initialization
+ code includes that in its table of SPI devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7877.
+
+config TOUCHSCREEN_AD7879_I2C
+ tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
+ depends on I2C
+ select TOUCHSCREEN_AD7879
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7879-1 controller, and your board-specific initialization
+ code includes that in its table of I2C devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879.
+
+config TOUCHSCREEN_AD7879_SPI
+ tristate "AD7879 based touchscreens: AD7879 SPI Interface"
+ depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
+ select TOUCHSCREEN_AD7879
+ help
+ Say Y here if you have a touchscreen interface using the
+ AD7879 controller, and your board-specific initialization
+ code includes that in its table of SPI devices.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7879.
+
+config TOUCHSCREEN_AD7879
+ tristate
+ default n
+
config TOUCHSCREEN_BITSY
tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
depends on SA1100_BITSY
To compile this driver as a module, choose M here: the
module will be called mainstone-wm97xx.
+config TOUCHSCREEN_WM97XX_ZYLONITE
+ tristate "Zylonite accelerated touch"
+ depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
+ select TOUCHSCREEN_WM9713
+ help
+ Say Y here for support for streaming mode with the touchscreen
+ on Zylonite systems.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zylonite-wm97xx.
+
config TOUCHSCREEN_USB_COMPOSITE
tristate "USB Touchscreen Driver"
depends on USB_ARCH_HAS_HCD
wm97xx-ts-y := wm97xx-core.o
+obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o
obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o
obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o
obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o
wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
--- /dev/null
+/*
+ * Copyright (C) 2006-2008 Michael Hennerich, Analog Devices Inc.
+ *
+ * Description: AD7877 based touchscreen, sensor (ADCs), DAC and GPIO driver
+ * Based on: ads7846.c
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * History:
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ * - corgi_ts.c
+ * Copyright (C) 2004-2005 Richard Purdie
+ * - omap_ts.[hc], ads7846.h, ts_osk.c
+ * Copyright (C) 2002 MontaVista Software
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2005 Dirk Behme
+ */
+
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ad7877.h>
+#include <asm/irq.h>
+
+#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50)
+
+#define MAX_SPI_FREQ_HZ 20000000
+#define MAX_12BIT ((1<<12)-1)
+
+#define AD7877_REG_ZEROS 0
+#define AD7877_REG_CTRL1 1
+#define AD7877_REG_CTRL2 2
+#define AD7877_REG_ALERT 3
+#define AD7877_REG_AUX1HIGH 4
+#define AD7877_REG_AUX1LOW 5
+#define AD7877_REG_BAT1HIGH 6
+#define AD7877_REG_BAT1LOW 7
+#define AD7877_REG_BAT2HIGH 8
+#define AD7877_REG_BAT2LOW 9
+#define AD7877_REG_TEMP1HIGH 10
+#define AD7877_REG_TEMP1LOW 11
+#define AD7877_REG_SEQ0 12
+#define AD7877_REG_SEQ1 13
+#define AD7877_REG_DAC 14
+#define AD7877_REG_NONE1 15
+#define AD7877_REG_EXTWRITE 15
+#define AD7877_REG_XPLUS 16
+#define AD7877_REG_YPLUS 17
+#define AD7877_REG_Z2 18
+#define AD7877_REG_aux1 19
+#define AD7877_REG_aux2 20
+#define AD7877_REG_aux3 21
+#define AD7877_REG_bat1 22
+#define AD7877_REG_bat2 23
+#define AD7877_REG_temp1 24
+#define AD7877_REG_temp2 25
+#define AD7877_REG_Z1 26
+#define AD7877_REG_GPIOCTRL1 27
+#define AD7877_REG_GPIOCTRL2 28
+#define AD7877_REG_GPIODATA 29
+#define AD7877_REG_NONE2 30
+#define AD7877_REG_NONE3 31
+
+#define AD7877_SEQ_YPLUS_BIT (1<<11)
+#define AD7877_SEQ_XPLUS_BIT (1<<10)
+#define AD7877_SEQ_Z2_BIT (1<<9)
+#define AD7877_SEQ_AUX1_BIT (1<<8)
+#define AD7877_SEQ_AUX2_BIT (1<<7)
+#define AD7877_SEQ_AUX3_BIT (1<<6)
+#define AD7877_SEQ_BAT1_BIT (1<<5)
+#define AD7877_SEQ_BAT2_BIT (1<<4)
+#define AD7877_SEQ_TEMP1_BIT (1<<3)
+#define AD7877_SEQ_TEMP2_BIT (1<<2)
+#define AD7877_SEQ_Z1_BIT (1<<1)
+
+enum {
+ AD7877_SEQ_YPOS = 0,
+ AD7877_SEQ_XPOS = 1,
+ AD7877_SEQ_Z2 = 2,
+ AD7877_SEQ_AUX1 = 3,
+ AD7877_SEQ_AUX2 = 4,
+ AD7877_SEQ_AUX3 = 5,
+ AD7877_SEQ_BAT1 = 6,
+ AD7877_SEQ_BAT2 = 7,
+ AD7877_SEQ_TEMP1 = 8,
+ AD7877_SEQ_TEMP2 = 9,
+ AD7877_SEQ_Z1 = 10,
+ AD7877_NR_SENSE = 11,
+};
+
+/* DAC Register Default RANGE 0 to Vcc, Volatge Mode, DAC On */
+#define AD7877_DAC_CONF 0x1
+
+/* If gpio3 is set AUX3/GPIO3 acts as GPIO Output */
+#define AD7877_EXTW_GPIO_3_CONF 0x1C4
+#define AD7877_EXTW_GPIO_DATA 0x200
+
+/* Control REG 2 */
+#define AD7877_TMR(x) ((x & 0x3) << 0)
+#define AD7877_REF(x) ((x & 0x1) << 2)
+#define AD7877_POL(x) ((x & 0x1) << 3)
+#define AD7877_FCD(x) ((x & 0x3) << 4)
+#define AD7877_PM(x) ((x & 0x3) << 6)
+#define AD7877_ACQ(x) ((x & 0x3) << 8)
+#define AD7877_AVG(x) ((x & 0x3) << 10)
+
+/* Control REG 1 */
+#define AD7877_SER (1 << 11) /* non-differential */
+#define AD7877_DFR (0 << 11) /* differential */
+
+#define AD7877_MODE_NOC (0) /* Do not convert */
+#define AD7877_MODE_SCC (1) /* Single channel conversion */
+#define AD7877_MODE_SEQ0 (2) /* Sequence 0 in Slave Mode */
+#define AD7877_MODE_SEQ1 (3) /* Sequence 1 in Master Mode */
+
+#define AD7877_CHANADD(x) ((x&0xF)<<7)
+#define AD7877_READADD(x) ((x)<<2)
+#define AD7877_WRITEADD(x) ((x)<<12)
+
+#define AD7877_READ_CHAN(x) (AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_SER | \
+ AD7877_MODE_SCC | AD7877_CHANADD(AD7877_REG_ ## x) | \
+ AD7877_READADD(AD7877_REG_ ## x))
+
+#define AD7877_MM_SEQUENCE (AD7877_SEQ_YPLUS_BIT | AD7877_SEQ_XPLUS_BIT | \
+ AD7877_SEQ_Z2_BIT | AD7877_SEQ_Z1_BIT)
+
+/*
+ * Non-touchscreen sensors only use single-ended conversions.
+ */
+
+struct ser_req {
+ u16 reset;
+ u16 ref_on;
+ u16 command;
+ u16 sample;
+ struct spi_message msg;
+ struct spi_transfer xfer[6];
+};
+
+struct ad7877 {
+ struct input_dev *input;
+ char phys[32];
+
+ struct spi_device *spi;
+ u16 model;
+ u16 vref_delay_usecs;
+ u16 x_plate_ohms;
+ u16 pressure_max;
+
+ u16 cmd_crtl1;
+ u16 cmd_crtl2;
+ u16 cmd_dummy;
+ u16 dac;
+
+ u8 stopacq_polarity;
+ u8 first_conversion_delay;
+ u8 acquisition_time;
+ u8 averaging;
+ u8 pen_down_acc_interval;
+
+ u16 conversion_data[AD7877_NR_SENSE];
+
+ struct spi_transfer xfer[AD7877_NR_SENSE + 2];
+ struct spi_message msg;
+
+ struct mutex mutex;
+ unsigned disabled:1; /* P: mutex */
+ unsigned gpio3:1; /* P: mutex */
+ unsigned gpio4:1; /* P: mutex */
+
+ spinlock_t lock;
+ struct timer_list timer; /* P: lock */
+ unsigned pending:1; /* P: lock */
+};
+
+static int gpio3;
+module_param(gpio3, int, 0);
+MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3");
+
+/*
+ * ad7877_read/write are only used for initial setup and for sysfs controls.
+ * The main traffic is done using spi_async() in the interrupt handler.
+ */
+
+static int ad7877_read(struct spi_device *spi, u16 reg)
+{
+ struct ser_req *req;
+ int status, ret;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) (AD7877_WRITEADD(AD7877_REG_CTRL1) |
+ AD7877_READADD(reg));
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ req->xfer[1].rx_buf = &req->sample;
+ req->xfer[1].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+ spi_message_add_tail(&req->xfer[1], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+ ret = status ? : req->sample;
+
+ kfree(req);
+
+ return ret;
+}
+
+static int ad7877_write(struct spi_device *spi, u16 reg, u16 val)
+{
+ struct ser_req *req;
+ int status;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) (AD7877_WRITEADD(reg) | (val & MAX_12BIT));
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+
+ kfree(req);
+
+ return status;
+}
+
+static int ad7877_read_adc(struct spi_device *spi, unsigned command)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+ struct ser_req *req;
+ int status;
+ int sample;
+ int i;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ /* activate reference, so it has time to settle; */
+ req->ref_on = AD7877_WRITEADD(AD7877_REG_CTRL2) |
+ AD7877_POL(ts->stopacq_polarity) |
+ AD7877_AVG(0) | AD7877_PM(2) | AD7877_TMR(0) |
+ AD7877_ACQ(ts->acquisition_time) | AD7877_FCD(0);
+
+ req->reset = AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_MODE_NOC;
+
+ req->command = (u16) command;
+
+ req->xfer[0].tx_buf = &req->reset;
+ req->xfer[0].len = 2;
+
+ req->xfer[1].tx_buf = &req->ref_on;
+ req->xfer[1].len = 2;
+ req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+
+ req->xfer[2].tx_buf = &req->command;
+ req->xfer[2].len = 2;
+ req->xfer[2].delay_usecs = ts->vref_delay_usecs;
+
+ req->xfer[3].rx_buf = &req->sample;
+ req->xfer[3].len = 2;
+
+ req->xfer[4].tx_buf = &ts->cmd_crtl2; /*REF OFF*/
+ req->xfer[4].len = 2;
+
+ req->xfer[5].tx_buf = &ts->cmd_crtl1; /*DEFAULT*/
+ req->xfer[5].len = 2;
+
+ /* group all the transfers together, so we can't interfere with
+ * reading touchscreen state; disable penirq while sampling
+ */
+ for (i = 0; i < 6; i++)
+ spi_message_add_tail(&req->xfer[i], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+ sample = req->sample;
+
+ kfree(req);
+
+ return status ? : sample;
+}
+
+static void ad7877_rx(struct ad7877 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+ unsigned Rt;
+ u16 x, y, z1, z2;
+
+ x = ts->conversion_data[AD7877_SEQ_XPOS] & MAX_12BIT;
+ y = ts->conversion_data[AD7877_SEQ_YPOS] & MAX_12BIT;
+ z1 = ts->conversion_data[AD7877_SEQ_Z1] & MAX_12BIT;
+ z2 = ts->conversion_data[AD7877_SEQ_Z2] & MAX_12BIT;
+
+ /*
+ * The samples processed here are already preprocessed by the AD7877.
+ * The preprocessing function consists of an averaging filter.
+ * The combination of 'first conversion delay' and averaging provides a robust solution,
+ * discarding the spurious noise in the signal and keeping only the data of interest.
+ * The size of the averaging filter is programmable. (dev.platform_data, see linux/spi/ad7877.h)
+ * Other user-programmable conversion controls include variable acquisition time,
+ * and first conversion delay. Up to 16 averages can be taken per conversion.
+ */
+
+ if (likely(x && z1)) {
+ /* compute touch pressure resistance using equation #1 */
+ Rt = (z2 - z1) * x * ts->x_plate_ohms;
+ Rt /= z1;
+ Rt = (Rt + 2047) >> 12;
+
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_abs(input_dev, ABS_PRESSURE, Rt);
+ input_sync(input_dev);
+ }
+}
+
+static inline void ad7877_ts_event_release(struct ad7877 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
+}
+
+static void ad7877_timer(unsigned long handle)
+{
+ struct ad7877 *ts = (void *)handle;
+
+ ad7877_ts_event_release(ts);
+}
+
+static irqreturn_t ad7877_irq(int irq, void *handle)
+{
+ struct ad7877 *ts = handle;
+ unsigned long flags;
+ int status;
+
+ /*
+ * The repeated conversion sequencer controlled by TMR kicked off
+ * too fast. We ignore the last and process the sample sequence
+ * currently in the queue. It can't be older than 9.4ms, and we
+ * need to avoid that ts->msg doesn't get issued twice while in work.
+ */
+
+ spin_lock_irqsave(&ts->lock, flags);
+ if (!ts->pending) {
+ ts->pending = 1;
+
+ status = spi_async(ts->spi, &ts->msg);
+ if (status)
+ dev_err(&ts->spi->dev, "spi_sync --> %d\n", status);
+ }
+ spin_unlock_irqrestore(&ts->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void ad7877_callback(void *_ts)
+{
+ struct ad7877 *ts = _ts;
+
+ spin_lock_irq(&ts->lock);
+
+ ad7877_rx(ts);
+ ts->pending = 0;
+ mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+
+ spin_unlock_irq(&ts->lock);
+}
+
+static void ad7877_disable(struct ad7877 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (!ts->disabled) {
+ ts->disabled = 1;
+ disable_irq(ts->spi->irq);
+
+ /* Wait for spi_async callback */
+ while (ts->pending)
+ msleep(1);
+
+ if (del_timer_sync(&ts->timer))
+ ad7877_ts_event_release(ts);
+ }
+
+ /* we know the chip's in lowpower mode since we always
+ * leave it that way after every request
+ */
+
+ mutex_unlock(&ts->mutex);
+}
+
+static void ad7877_enable(struct ad7877 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (ts->disabled) {
+ ts->disabled = 0;
+ enable_irq(ts->spi->irq);
+ }
+
+ mutex_unlock(&ts->mutex);
+}
+
+#define SHOW(name) static ssize_t \
+name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct ad7877 *ts = dev_get_drvdata(dev); \
+ ssize_t v = ad7877_read_adc(ts->spi, \
+ AD7877_READ_CHAN(name)); \
+ if (v < 0) \
+ return v; \
+ return sprintf(buf, "%u\n", (unsigned) v); \
+} \
+static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
+
+SHOW(aux1)
+SHOW(aux2)
+SHOW(aux3)
+SHOW(bat1)
+SHOW(bat2)
+SHOW(temp1)
+SHOW(temp2)
+
+static ssize_t ad7877_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ad7877_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ if (val)
+ ad7877_disable(ts);
+ else
+ ad7877_enable(ts);
+
+ return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store);
+
+static ssize_t ad7877_dac_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->dac);
+}
+
+static ssize_t ad7877_dac_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->dac = val & 0xFF;
+ ad7877_write(ts->spi, AD7877_REG_DAC, (ts->dac << 4) | AD7877_DAC_CONF);
+ mutex_unlock(&ts->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store);
+
+static ssize_t ad7877_gpio3_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->gpio3);
+}
+
+static ssize_t ad7877_gpio3_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->gpio3 = !!val;
+ ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA |
+ (ts->gpio4 << 4) | (ts->gpio3 << 5));
+ mutex_unlock(&ts->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store);
+
+static ssize_t ad7877_gpio4_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->gpio4);
+}
+
+static ssize_t ad7877_gpio4_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7877 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->gpio4 = !!val;
+ ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA |
+ (ts->gpio4 << 4) | (ts->gpio3 << 5));
+ mutex_unlock(&ts->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(gpio4, 0664, ad7877_gpio4_show, ad7877_gpio4_store);
+
+static struct attribute *ad7877_attributes[] = {
+ &dev_attr_temp1.attr,
+ &dev_attr_temp2.attr,
+ &dev_attr_aux1.attr,
+ &dev_attr_aux2.attr,
+ &dev_attr_bat1.attr,
+ &dev_attr_bat2.attr,
+ &dev_attr_disable.attr,
+ &dev_attr_dac.attr,
+ &dev_attr_gpio4.attr,
+ NULL
+};
+
+static const struct attribute_group ad7877_attr_group = {
+ .attrs = ad7877_attributes,
+};
+
+static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
+{
+ struct spi_message *m;
+ int i;
+
+ ts->cmd_crtl2 = AD7877_WRITEADD(AD7877_REG_CTRL2) |
+ AD7877_POL(ts->stopacq_polarity) |
+ AD7877_AVG(ts->averaging) | AD7877_PM(1) |
+ AD7877_TMR(ts->pen_down_acc_interval) |
+ AD7877_ACQ(ts->acquisition_time) |
+ AD7877_FCD(ts->first_conversion_delay);
+
+ ad7877_write(spi, AD7877_REG_CTRL2, ts->cmd_crtl2);
+
+ ts->cmd_crtl1 = AD7877_WRITEADD(AD7877_REG_CTRL1) |
+ AD7877_READADD(AD7877_REG_XPLUS-1) |
+ AD7877_MODE_SEQ1 | AD7877_DFR;
+
+ ad7877_write(spi, AD7877_REG_CTRL1, ts->cmd_crtl1);
+
+ ts->cmd_dummy = 0;
+
+ m = &ts->msg;
+
+ spi_message_init(m);
+
+ m->complete = ad7877_callback;
+ m->context = ts;
+
+ ts->xfer[0].tx_buf = &ts->cmd_crtl1;
+ ts->xfer[0].len = 2;
+
+ spi_message_add_tail(&ts->xfer[0], m);
+
+ ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */
+ ts->xfer[1].len = 2;
+
+ spi_message_add_tail(&ts->xfer[1], m);
+
+ for (i = 0; i < 11; i++) {
+ ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i];
+ ts->xfer[i + 2].len = 2;
+ spi_message_add_tail(&ts->xfer[i + 2], m);
+ }
+}
+
+static int __devinit ad7877_probe(struct spi_device *spi)
+{
+ struct ad7877 *ts;
+ struct input_dev *input_dev;
+ struct ad7877_platform_data *pdata = spi->dev.platform_data;
+ int err;
+ u16 verify;
+
+ if (!spi->irq) {
+ dev_dbg(&spi->dev, "no IRQ?\n");
+ return -ENODEV;
+ }
+
+ if (!pdata) {
+ dev_dbg(&spi->dev, "no platform data?\n");
+ return -ENODEV;
+ }
+
+ /* don't exceed max specified SPI CLK frequency */
+ if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+ dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz);
+ return -EINVAL;
+ }
+
+ ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts || !input_dev) {
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ dev_set_drvdata(&spi->dev, ts);
+ ts->spi = spi;
+ ts->input = input_dev;
+
+ setup_timer(&ts->timer, ad7877_timer, (unsigned long) ts);
+ mutex_init(&ts->mutex);
+ spin_lock_init(&ts->lock);
+
+ ts->model = pdata->model ? : 7877;
+ ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
+ ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+ ts->pressure_max = pdata->pressure_max ? : ~0;
+
+ ts->stopacq_polarity = pdata->stopacq_polarity;
+ ts->first_conversion_delay = pdata->first_conversion_delay;
+ ts->acquisition_time = pdata->acquisition_time;
+ ts->averaging = pdata->averaging;
+ ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
+
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+
+ input_dev->name = "AD7877 Touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->dev.parent = &spi->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(ABS_X, input_dev->absbit);
+ __set_bit(ABS_Y, input_dev->absbit);
+ __set_bit(ABS_PRESSURE, input_dev->absbit);
+
+ input_set_abs_params(input_dev, ABS_X,
+ pdata->x_min ? : 0,
+ pdata->x_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ pdata->y_min ? : 0,
+ pdata->y_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+ ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE);
+
+ verify = ad7877_read(spi, AD7877_REG_SEQ1);
+
+ if (verify != AD7877_MM_SEQUENCE){
+ dev_err(&spi->dev, "%s: Failed to probe %s\n",
+ dev_name(&spi->dev), input_dev->name);
+ err = -ENODEV;
+ goto err_free_mem;
+ }
+
+ if (gpio3)
+ ad7877_write(spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_3_CONF);
+
+ ad7877_setup_ts_def_msg(spi, ts);
+
+ /* Request AD7877 /DAV GPIO interrupt */
+
+ err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+ spi->dev.driver->name, ts);
+ if (err) {
+ dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+ goto err_free_mem;
+ }
+
+ err = sysfs_create_group(&spi->dev.kobj, &ad7877_attr_group);
+ if (err)
+ goto err_free_irq;
+
+ err = device_create_file(&spi->dev,
+ gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
+ if (err)
+ goto err_remove_attr_group;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_remove_attr;
+
+ return 0;
+
+err_remove_attr:
+ device_remove_file(&spi->dev,
+ gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
+err_remove_attr_group:
+ sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
+err_free_irq:
+ free_irq(spi->irq, ts);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(ts);
+ dev_set_drvdata(&spi->dev, NULL);
+ return err;
+}
+
+static int __devexit ad7877_remove(struct spi_device *spi)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+
+ sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
+ device_remove_file(&spi->dev,
+ gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3);
+
+ ad7877_disable(ts);
+ free_irq(ts->spi->irq, ts);
+
+ input_unregister_device(ts->input);
+ kfree(ts);
+
+ dev_dbg(&spi->dev, "unregistered touchscreen\n");
+ dev_set_drvdata(&spi->dev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ad7877_suspend(struct spi_device *spi, pm_message_t message)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+
+ ad7877_disable(ts);
+
+ return 0;
+}
+
+static int ad7877_resume(struct spi_device *spi)
+{
+ struct ad7877 *ts = dev_get_drvdata(&spi->dev);
+
+ ad7877_enable(ts);
+
+ return 0;
+}
+#else
+#define ad7877_suspend NULL
+#define ad7877_resume NULL
+#endif
+
+static struct spi_driver ad7877_driver = {
+ .driver = {
+ .name = "ad7877",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7877_probe,
+ .remove = __devexit_p(ad7877_remove),
+ .suspend = ad7877_suspend,
+ .resume = ad7877_resume,
+};
+
+static int __init ad7877_init(void)
+{
+ return spi_register_driver(&ad7877_driver);
+}
+module_init(ad7877_init);
+
+static void __exit ad7877_exit(void)
+{
+ spi_unregister_driver(&ad7877_driver);
+}
+module_exit(ad7877_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7877 touchscreen Driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc.
+ *
+ * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface)
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ * History:
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ * - corgi_ts.c
+ * Copyright (C) 2004-2005 Richard Purdie
+ * - omap_ts.[hc], ads7846.h, ts_osk.c
+ * Copyright (C) 2002 MontaVista Software
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2005 Dirk Behme
+ * - ad7877.c
+ * Copyright (C) 2006-2008 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+
+#include <linux/spi/ad7879.h>
+
+#define AD7879_REG_ZEROS 0
+#define AD7879_REG_CTRL1 1
+#define AD7879_REG_CTRL2 2
+#define AD7879_REG_CTRL3 3
+#define AD7879_REG_AUX1HIGH 4
+#define AD7879_REG_AUX1LOW 5
+#define AD7879_REG_TEMP1HIGH 6
+#define AD7879_REG_TEMP1LOW 7
+#define AD7879_REG_XPLUS 8
+#define AD7879_REG_YPLUS 9
+#define AD7879_REG_Z1 10
+#define AD7879_REG_Z2 11
+#define AD7879_REG_AUXVBAT 12
+#define AD7879_REG_TEMP 13
+#define AD7879_REG_REVID 14
+
+/* Control REG 1 */
+#define AD7879_TMR(x) ((x & 0xFF) << 0)
+#define AD7879_ACQ(x) ((x & 0x3) << 8)
+#define AD7879_MODE_NOC (0 << 10) /* Do not convert */
+#define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */
+#define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */
+#define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */
+#define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */
+
+/* Control REG 2 */
+#define AD7879_FCD(x) ((x & 0x3) << 0)
+#define AD7879_RESET (1 << 4)
+#define AD7879_MFS(x) ((x & 0x3) << 5)
+#define AD7879_AVG(x) ((x & 0x3) << 7)
+#define AD7879_SER (1 << 9) /* non-differential */
+#define AD7879_DFR (0 << 9) /* differential */
+#define AD7879_GPIOPOL (1 << 10)
+#define AD7879_GPIODIR (1 << 11)
+#define AD7879_GPIO_DATA (1 << 12)
+#define AD7879_GPIO_EN (1 << 13)
+#define AD7879_PM(x) ((x & 0x3) << 14)
+#define AD7879_PM_SHUTDOWN (0)
+#define AD7879_PM_DYN (1)
+#define AD7879_PM_FULLON (2)
+
+/* Control REG 3 */
+#define AD7879_TEMPMASK_BIT (1<<15)
+#define AD7879_AUXVBATMASK_BIT (1<<14)
+#define AD7879_INTMODE_BIT (1<<13)
+#define AD7879_GPIOALERTMASK_BIT (1<<12)
+#define AD7879_AUXLOW_BIT (1<<11)
+#define AD7879_AUXHIGH_BIT (1<<10)
+#define AD7879_TEMPLOW_BIT (1<<9)
+#define AD7879_TEMPHIGH_BIT (1<<8)
+#define AD7879_YPLUS_BIT (1<<7)
+#define AD7879_XPLUS_BIT (1<<6)
+#define AD7879_Z1_BIT (1<<5)
+#define AD7879_Z2_BIT (1<<4)
+#define AD7879_AUX_BIT (1<<3)
+#define AD7879_VBAT_BIT (1<<2)
+#define AD7879_TEMP_BIT (1<<1)
+
+enum {
+ AD7879_SEQ_XPOS = 0,
+ AD7879_SEQ_YPOS = 1,
+ AD7879_SEQ_Z1 = 2,
+ AD7879_SEQ_Z2 = 3,
+ AD7879_NR_SENSE = 4,
+};
+
+#define MAX_12BIT ((1<<12)-1)
+#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50)
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#define AD7879_DEVID 0x7A
+typedef struct spi_device bus_device;
+#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+#define AD7879_DEVID 0x79
+typedef struct i2c_client bus_device;
+#endif
+
+struct ad7879 {
+ bus_device *bus;
+ struct input_dev *input;
+ struct work_struct work;
+ struct timer_list timer;
+
+ struct mutex mutex;
+ unsigned disabled:1; /* P: mutex */
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+ struct spi_message msg;
+ struct spi_transfer xfer[AD7879_NR_SENSE + 1];
+ u16 cmd;
+#endif
+ u16 conversion_data[AD7879_NR_SENSE];
+ char phys[32];
+ u8 first_conversion_delay;
+ u8 acquisition_time;
+ u8 averaging;
+ u8 pen_down_acc_interval;
+ u8 median;
+ u16 x_plate_ohms;
+ u16 pressure_max;
+ u16 gpio_init;
+ u16 cmd_crtl1;
+ u16 cmd_crtl2;
+ u16 cmd_crtl3;
+ unsigned gpio:1;
+};
+
+static int ad7879_read(bus_device *, u8);
+static int ad7879_write(bus_device *, u8, u16);
+static void ad7879_collect(struct ad7879 *);
+
+static void ad7879_report(struct ad7879 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+ unsigned Rt;
+ u16 x, y, z1, z2;
+
+ x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT;
+ y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT;
+ z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT;
+ z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT;
+
+ /*
+ * The samples processed here are already preprocessed by the AD7879.
+ * The preprocessing function consists of a median and an averaging filter.
+ * The combination of these two techniques provides a robust solution,
+ * discarding the spurious noise in the signal and keeping only the data of interest.
+ * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h)
+ * Other user-programmable conversion controls include variable acquisition time,
+ * and first conversion delay. Up to 16 averages can be taken per conversion.
+ */
+
+ if (likely(x && z1)) {
+ /* compute touch pressure resistance using equation #1 */
+ Rt = (z2 - z1) * x * ts->x_plate_ohms;
+ Rt /= z1;
+ Rt = (Rt + 2047) >> 12;
+
+ input_report_abs(input_dev, ABS_X, x);
+ input_report_abs(input_dev, ABS_Y, y);
+ input_report_abs(input_dev, ABS_PRESSURE, Rt);
+ input_sync(input_dev);
+ }
+}
+
+static void ad7879_work(struct work_struct *work)
+{
+ struct ad7879 *ts = container_of(work, struct ad7879, work);
+
+ /* use keventd context to read the result registers */
+ ad7879_collect(ts);
+ ad7879_report(ts);
+ mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+}
+
+static void ad7879_ts_event_release(struct ad7879 *ts)
+{
+ struct input_dev *input_dev = ts->input;
+
+ input_report_abs(input_dev, ABS_PRESSURE, 0);
+ input_sync(input_dev);
+}
+
+static void ad7879_timer(unsigned long handle)
+{
+ struct ad7879 *ts = (void *)handle;
+
+ ad7879_ts_event_release(ts);
+}
+
+static irqreturn_t ad7879_irq(int irq, void *handle)
+{
+ struct ad7879 *ts = handle;
+
+ /* The repeated conversion sequencer controlled by TMR kicked off too fast.
+ * We ignore the last and process the sample sequence currently in the queue.
+ * It can't be older than 9.4ms
+ */
+
+ if (!work_pending(&ts->work))
+ schedule_work(&ts->work);
+
+ return IRQ_HANDLED;
+}
+
+static void ad7879_setup(struct ad7879 *ts)
+{
+ ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+ AD7879_XPLUS_BIT |
+ AD7879_Z2_BIT |
+ AD7879_Z1_BIT |
+ AD7879_TEMPMASK_BIT |
+ AD7879_AUXVBATMASK_BIT |
+ AD7879_GPIOALERTMASK_BIT;
+
+ ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+ AD7879_AVG(ts->averaging) |
+ AD7879_MFS(ts->median) |
+ AD7879_FCD(ts->first_conversion_delay) |
+ ts->gpio_init;
+
+ ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+ AD7879_ACQ(ts->acquisition_time) |
+ AD7879_TMR(ts->pen_down_acc_interval);
+
+ ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2);
+ ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3);
+ ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1);
+}
+
+static void ad7879_disable(struct ad7879 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (!ts->disabled) {
+
+ ts->disabled = 1;
+ disable_irq(ts->bus->irq);
+
+ cancel_work_sync(&ts->work);
+
+ if (del_timer_sync(&ts->timer))
+ ad7879_ts_event_release(ts);
+
+ ad7879_write(ts->bus, AD7879_REG_CTRL2,
+ AD7879_PM(AD7879_PM_SHUTDOWN));
+ }
+
+ mutex_unlock(&ts->mutex);
+}
+
+static void ad7879_enable(struct ad7879 *ts)
+{
+ mutex_lock(&ts->mutex);
+
+ if (ts->disabled) {
+ ad7879_setup(ts);
+ ts->disabled = 0;
+ enable_irq(ts->bus->irq);
+ }
+
+ mutex_unlock(&ts->mutex);
+}
+
+static ssize_t ad7879_disable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ad7879_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ if (val)
+ ad7879_disable(ts);
+ else
+ ad7879_enable(ts);
+
+ return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
+
+static ssize_t ad7879_gpio_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", ts->gpio);
+}
+
+static ssize_t ad7879_gpio_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ad7879 *ts = dev_get_drvdata(dev);
+ unsigned long val;
+ int error;
+
+ error = strict_strtoul(buf, 10, &val);
+ if (error)
+ return error;
+
+ mutex_lock(&ts->mutex);
+ ts->gpio = !!val;
+ error = ad7879_write(ts->bus, AD7879_REG_CTRL2,
+ ts->gpio ?
+ ts->cmd_crtl2 & ~AD7879_GPIO_DATA :
+ ts->cmd_crtl2 | AD7879_GPIO_DATA);
+ mutex_unlock(&ts->mutex);
+
+ return error ? : count;
+}
+
+static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store);
+
+static struct attribute *ad7879_attributes[] = {
+ &dev_attr_disable.attr,
+ &dev_attr_gpio.attr,
+ NULL
+};
+
+static const struct attribute_group ad7879_attr_group = {
+ .attrs = ad7879_attributes,
+};
+
+static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts)
+{
+ struct input_dev *input_dev;
+ struct ad7879_platform_data *pdata = bus->dev.platform_data;
+ int err;
+ u16 revid;
+
+ if (!bus->irq) {
+ dev_err(&bus->dev, "no IRQ?\n");
+ return -ENODEV;
+ }
+
+ if (!pdata) {
+ dev_err(&bus->dev, "no platform data?\n");
+ return -ENODEV;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ ts->input = input_dev;
+
+ setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
+ INIT_WORK(&ts->work, ad7879_work);
+ mutex_init(&ts->mutex);
+
+ ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+ ts->pressure_max = pdata->pressure_max ? : ~0;
+
+ ts->first_conversion_delay = pdata->first_conversion_delay;
+ ts->acquisition_time = pdata->acquisition_time;
+ ts->averaging = pdata->averaging;
+ ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
+ ts->median = pdata->median;
+
+ if (pdata->gpio_output)
+ ts->gpio_init = AD7879_GPIO_EN |
+ (pdata->gpio_default ? 0 : AD7879_GPIO_DATA);
+ else
+ ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR;
+
+ snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev));
+
+ input_dev->name = "AD7879 Touchscreen";
+ input_dev->phys = ts->phys;
+ input_dev->dev.parent = &bus->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(ABS_X, input_dev->absbit);
+ __set_bit(ABS_Y, input_dev->absbit);
+ __set_bit(ABS_PRESSURE, input_dev->absbit);
+
+ input_set_abs_params(input_dev, ABS_X,
+ pdata->x_min ? : 0,
+ pdata->x_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ pdata->y_min ? : 0,
+ pdata->y_max ? : MAX_12BIT,
+ 0, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+ err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET);
+
+ if (err < 0) {
+ dev_err(&bus->dev, "Failed to write %s\n", input_dev->name);
+ goto err_free_mem;
+ }
+
+ revid = ad7879_read(bus, AD7879_REG_REVID);
+
+ if ((revid & 0xFF) != AD7879_DEVID) {
+ dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name);
+ err = -ENODEV;
+ goto err_free_mem;
+ }
+
+ ad7879_setup(ts);
+
+ err = request_irq(bus->irq, ad7879_irq,
+ IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
+
+ if (err) {
+ dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
+ goto err_free_mem;
+ }
+
+ err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group);
+ if (err)
+ goto err_free_irq;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_remove_attr;
+
+ dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n",
+ revid >> 8, bus->irq);
+
+ return 0;
+
+err_remove_attr:
+ sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group);
+err_free_irq:
+ free_irq(bus->irq, ts);
+err_free_mem:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts)
+{
+ ad7879_disable(ts);
+ sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group);
+ free_irq(ts->bus->irq, ts);
+ input_unregister_device(ts->input);
+ dev_dbg(&bus->dev, "unregistered touchscreen\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ad7879_suspend(bus_device *bus, pm_message_t message)
+{
+ struct ad7879 *ts = dev_get_drvdata(&bus->dev);
+
+ ad7879_disable(ts);
+
+ return 0;
+}
+
+static int ad7879_resume(bus_device *bus)
+{
+ struct ad7879 *ts = dev_get_drvdata(&bus->dev);
+
+ ad7879_enable(ts);
+
+ return 0;
+}
+#else
+#define ad7879_suspend NULL
+#define ad7879_resume NULL
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
+#define MAX_SPI_FREQ_HZ 5000000
+#define AD7879_CMD_MAGIC 0xE000
+#define AD7879_CMD_READ (1 << 10)
+#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF))
+#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF))
+
+struct ser_req {
+ u16 command;
+ u16 data;
+ struct spi_message msg;
+ struct spi_transfer xfer[2];
+};
+
+/*
+ * ad7879_read/write are only used for initial setup and for sysfs controls.
+ * The main traffic is done in ad7879_collect().
+ */
+
+static int ad7879_read(struct spi_device *spi, u8 reg)
+{
+ struct ser_req *req;
+ int status, ret;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) AD7879_READCMD(reg);
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ req->xfer[1].rx_buf = &req->data;
+ req->xfer[1].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+ spi_message_add_tail(&req->xfer[1], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+ ret = status ? : req->data;
+
+ kfree(req);
+
+ return ret;
+}
+
+static int ad7879_write(struct spi_device *spi, u8 reg, u16 val)
+{
+ struct ser_req *req;
+ int status;
+
+ req = kzalloc(sizeof *req, GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ spi_message_init(&req->msg);
+
+ req->command = (u16) AD7879_WRITECMD(reg);
+ req->xfer[0].tx_buf = &req->command;
+ req->xfer[0].len = 2;
+
+ req->data = val;
+ req->xfer[1].tx_buf = &req->data;
+ req->xfer[1].len = 2;
+
+ spi_message_add_tail(&req->xfer[0], &req->msg);
+ spi_message_add_tail(&req->xfer[1], &req->msg);
+
+ status = spi_sync(spi, &req->msg);
+
+ kfree(req);
+
+ return status;
+}
+
+static void ad7879_collect(struct ad7879 *ts)
+{
+ int status = spi_sync(ts->bus, &ts->msg);
+
+ if (status)
+ dev_err(&ts->bus->dev, "spi_sync --> %d\n", status);
+}
+
+static void ad7879_setup_ts_def_msg(struct ad7879 *ts)
+{
+ struct spi_message *m;
+ int i;
+
+ ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS);
+
+ m = &ts->msg;
+ spi_message_init(m);
+ ts->xfer[0].tx_buf = &ts->cmd;
+ ts->xfer[0].len = 2;
+
+ spi_message_add_tail(&ts->xfer[0], m);
+
+ for (i = 0; i < AD7879_NR_SENSE; i++) {
+ ts->xfer[i + 1].rx_buf = &ts->conversion_data[i];
+ ts->xfer[i + 1].len = 2;
+ spi_message_add_tail(&ts->xfer[i + 1], m);
+ }
+}
+
+static int __devinit ad7879_probe(struct spi_device *spi)
+{
+ struct ad7879 *ts;
+ int error;
+
+ /* don't exceed max specified SPI CLK frequency */
+ if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+ dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
+ return -EINVAL;
+ }
+
+ ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, ts);
+ ts->bus = spi;
+
+ ad7879_setup_ts_def_msg(ts);
+
+ error = ad7879_construct(spi, ts);
+ if (error) {
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(ts);
+ }
+
+ return 0;
+}
+
+static int __devexit ad7879_remove(struct spi_device *spi)
+{
+ struct ad7879 *ts = dev_get_drvdata(&spi->dev);
+
+ ad7879_destroy(spi, ts);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(ts);
+
+ return 0;
+}
+
+static struct spi_driver ad7879_driver = {
+ .driver = {
+ .name = "ad7879",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7879_probe,
+ .remove = __devexit_p(ad7879_remove),
+ .suspend = ad7879_suspend,
+ .resume = ad7879_resume,
+};
+
+static int __init ad7879_init(void)
+{
+ return spi_register_driver(&ad7879_driver);
+}
+module_init(ad7879_init);
+
+static void __exit ad7879_exit(void)
+{
+ spi_unregister_driver(&ad7879_driver);
+}
+module_exit(ad7879_exit);
+
+#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
+
+/* All registers are word-sized.
+ * AD7879 uses a high-byte first convention.
+ */
+static int ad7879_read(struct i2c_client *client, u8 reg)
+{
+ return swab16(i2c_smbus_read_word_data(client, reg));
+}
+
+static int ad7879_write(struct i2c_client *client, u8 reg, u16 val)
+{
+ return i2c_smbus_write_word_data(client, reg, swab16(val));
+}
+
+static void ad7879_collect(struct ad7879 *ts)
+{
+ int i;
+
+ for (i = 0; i < AD7879_NR_SENSE; i++)
+ ts->conversion_data[i] = ad7879_read(ts->bus,
+ AD7879_REG_XPLUS + i);
+}
+
+static int __devinit ad7879_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ad7879 *ts;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WORD_DATA)) {
+ dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+ return -EIO;
+ }
+
+ ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, ts);
+ ts->bus = client;
+
+ error = ad7879_construct(client, ts);
+ if (error) {
+ i2c_set_clientdata(client, NULL);
+ kfree(ts);
+ }
+
+ return 0;
+}
+
+static int __devexit ad7879_remove(struct i2c_client *client)
+{
+ struct ad7879 *ts = dev_get_drvdata(&client->dev);
+
+ ad7879_destroy(client, ts);
+ i2c_set_clientdata(client, NULL);
+ kfree(ts);
+
+ return 0;
+}
+
+static const struct i2c_device_id ad7879_id[] = {
+ { "ad7879", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ad7879_id);
+
+static struct i2c_driver ad7879_driver = {
+ .driver = {
+ .name = "ad7879",
+ .owner = THIS_MODULE,
+ },
+ .probe = ad7879_probe,
+ .remove = __devexit_p(ad7879_remove),
+ .suspend = ad7879_suspend,
+ .resume = ad7879_resume,
+ .id_table = ad7879_id,
+};
+
+static int __init ad7879_init(void)
+{
+ return i2c_add_driver(&ad7879_driver);
+}
+module_init(ad7879_init);
+
+static void __exit ad7879_exit(void)
+{
+ i2c_del_driver(&ad7879_driver);
+}
+module_exit(ad7879_exit);
+#endif
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver");
+MODULE_LICENSE("GPL");
void (*filter_cleanup)(void *data);
int (*get_pendown_state)(void);
int gpio_pendown;
+
+ void (*wait_for_sync)(void);
};
/* leave chip selected when we're done, for quicker re-select? */
return !gpio_get_value(ts->gpio_pendown);
}
+static void null_wait_for_sync(void)
+{
+}
+
/*
* PENIRQ only kicks the timer. The timer only reissues the SPI transfer,
* to retrieve touchscreen status.
default:
BUG();
}
+ ts->wait_for_sync();
status = spi_async(ts->spi, m);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n",
} else {
/* pen is still down, continue with the measurement */
ts->msg_idx = 0;
+ ts->wait_for_sync();
status = spi_async(ts->spi, &ts->msg[0]);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
* that here. (The "generic irq" framework may help...)
*/
ts->irq_disabled = 1;
- disable_irq(ts->spi->irq);
+ disable_irq_nosync(ts->spi->irq);
ts->pending = 1;
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
ts->penirq_recheck_delay_usecs =
pdata->penirq_recheck_delay_usecs;
+ ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
input_dev->name = "ADS784x Touchscreen";
*
* Copyright (C) 2006-2008 Marvell International Ltd.
* Fengwei Yin <fengwei.yin@marvell.com>
+ * Bin Yang <bin.yang@marvell.com>
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
goto err_reset;
touch->state = STATE_STOP;
+
+ /* FIXME: PEN_{UP/DOWN} events are expected to be
+ * available by stopping TSI, but this is found not
+ * always true, delay and simulate such an event
+ * here is more reliable
+ */
+ mdelay(1);
+ da9034_event_handler(touch,
+ is_pen_down(touch) ? EVENT_PEN_DOWN :
+ EVENT_PEN_UP);
break;
case STATE_STOP:
report_pen_up(touch);
touch->state = STATE_IDLE;
}
-
- input_sync(touch->input_dev);
break;
case STATE_WAIT:
if (is_pen_down(touch)) {
start_tsi(touch);
touch->state = STATE_BUSY;
- } else
+ } else {
+ report_pen_up(touch);
touch->state = STATE_IDLE;
+ }
break;
}
return;
struct da9034_touch *touch =
container_of(nb, struct da9034_touch, notifier);
- if (event & DA9034_EVENT_PEN_DOWN) {
- if (is_pen_down(touch))
- da9034_event_handler(touch, EVENT_PEN_DOWN);
- else
- da9034_event_handler(touch, EVENT_PEN_UP);
- }
-
if (event & DA9034_EVENT_TSI_READY)
da9034_event_handler(touch, EVENT_TSI_READY);
+ if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+ da9034_event_handler(touch, EVENT_PEN_DOWN);
+
return 0;
}
module_exit(da9034_touch_exit);
MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9034-touch");
#else
static void wm97xx_acc_pen_up(struct wm97xx *wm)
{
- int count = 16;
+ unsigned int count;
+
schedule_timeout_uninterruptible(1);
- while (count < 16) {
+ for (count = 0; count < 16; count++)
MODR;
- count--;
- }
}
#endif
input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+ input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
input_sync(wm->input_dev);
reads++;
} while (reads < cinfo[sp_idx].reads);
if (enable)
enable_irq(wm->pen_irq);
else
- disable_irq(wm->pen_irq);
+ disable_irq_nosync(wm->pen_irq);
}
static struct wm97xx_mach_ops mainstone_mach_ops = {
static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
{
struct tsc2007 *ts = container_of(handle, struct tsc2007, timer);
+ unsigned long flags;
- spin_lock_irq(&ts->lock);
+ spin_lock_irqsave(&ts->lock, flags);
if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
struct input_dev *input = ts->input;
tsc2007_send_event(ts);
}
- spin_unlock_irq(&ts->lock);
+ spin_unlock_irqrestore(&ts->lock, flags);
return HRTIMER_NORESTART;
}
spin_lock_irqsave(&ts->lock, flags);
if (likely(ts->get_pendown_state())) {
- disable_irq(ts->irq);
+ disable_irq_nosync(ts->irq);
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
}
input_report_abs(idev, ABS_X, x);
input_report_abs(idev, ABS_Y, y);
input_report_abs(idev, ABS_PRESSURE, pressure);
+ input_report_key(idev, BTN_TOUCH, 1);
input_sync(idev);
}
static void ucb1400_ts_event_release(struct input_dev *idev)
{
input_report_abs(idev, ABS_PRESSURE, 0);
+ input_report_key(idev, BTN_TOUCH, 0);
input_sync(idev);
}
struct ucb1400_ts *ucb = devid;
if (irqnr == ucb->irq) {
- disable_irq(ucb->irq);
+ disable_irq_nosync(ucb->irq);
ucb->irq_pending = 1;
wake_up(&ucb->ts_wait);
return IRQ_HANDLED;
ucb->ts_idev->id.product = ucb->id;
ucb->ts_idev->open = ucb1400_ts_open;
ucb->ts_idev->close = ucb1400_ts_close;
- ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS);
+ ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+ ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
ucb1400_adc_enable(ucb->ac97);
x_res = ucb1400_ts_read_xres(ucb);
#ifdef CONFIG_PM
static int ucb1400_ts_resume(struct platform_device *dev)
{
- struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
if (ucb->ts_task) {
/*
* provided. */
BUG_ON(!wm->mach_ops->irq_enable);
- if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+ if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
"wm97xx-pen", wm)) {
dev_err(wm->dev,
"Failed to register pen down interrupt, polling");
wm->pen_is_down = 0;
dev_dbg(wm->dev, "pen up\n");
input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
+ input_report_key(wm->input_dev, BTN_TOUCH, 0);
input_sync(wm->input_dev);
} else if (!(rc & RC_AGAIN)) {
/* We need high frequency updates only while
input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
+ input_report_key(wm->input_dev, BTN_TOUCH, 1);
input_sync(wm->input_dev);
wm->pen_is_down = 1;
wm->ts_reader_interval = wm->ts_reader_min_interval;
wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
- set_bit(EV_ABS, wm->input_dev->evbit);
- set_bit(ABS_X, wm->input_dev->absbit);
- set_bit(ABS_Y, wm->input_dev->absbit);
- set_bit(ABS_PRESSURE, wm->input_dev->absbit);
+
+ __set_bit(EV_ABS, wm->input_dev->evbit);
+ __set_bit(EV_KEY, wm->input_dev->evbit);
+ __set_bit(BTN_TOUCH, wm->input_dev->keybit);
+
input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
abs_x[2], 0);
input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
abs_y[2], 0);
input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
abs_p[2], 0);
+
input_set_drvdata(wm->input_dev, wm);
wm->input_dev->dev.parent = dev;
+
ret = input_register_device(wm->input_dev);
if (ret < 0)
goto dev_alloc_err;
--- /dev/null
+/*
+ * zylonite-wm97xx.c -- Zylonite Continuous Touch screen driver
+ *
+ * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ * Andrew Zabolotny <zap@homelink.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Notes:
+ * This is a wm97xx extended touch driver supporting interrupt driven
+ * and continuous operation on Marvell Zylonite development systems
+ * (which have a WM9713 on board).
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/wm97xx.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/regs-ac97.h>
+
+struct continuous {
+ u16 id; /* codec id */
+ u8 code; /* continuous code */
+ u8 reads; /* number of coord reads per read cycle */
+ u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+ { WM9713_ID2, 0, WM_READS(94), 94 },
+ { WM9713_ID2, 1, WM_READS(120), 120 },
+ { WM9713_ID2, 2, WM_READS(154), 154 },
+ { WM9713_ID2, 3, WM_READS(188), 188 },
+};
+
+/* continuous speed index */
+static int sp_idx;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO machines */
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+ int i;
+
+ msleep(1);
+
+ for (i = 0; i < 16; i++)
+ MODR;
+}
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+ u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+ int reads = 0;
+ static u16 last, tries;
+
+ /* When the AC97 queue has been drained we need to allow time
+ * to buffer up samples otherwise we end up spinning polling
+ * for samples. The controller can't have a suitably low
+ * threashold set to use the notifications it gives.
+ */
+ msleep(1);
+
+ if (tries > 5) {
+ tries = 0;
+ return RC_PENUP;
+ }
+
+ x = MODR;
+ if (x == last) {
+ tries++;
+ return RC_AGAIN;
+ }
+ last = x;
+ do {
+ if (reads)
+ x = MODR;
+ y = MODR;
+ if (pressure)
+ p = MODR;
+
+ /* are samples valid */
+ if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X ||
+ (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y ||
+ (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES)
+ goto up;
+
+ /* coordinate is good */
+ tries = 0;
+ input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+ input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+ input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+ input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
+ input_sync(wm->input_dev);
+ reads++;
+ } while (reads < cinfo[sp_idx].reads);
+up:
+ return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+ int idx;
+
+ /* check we have a codec */
+ if (wm->ac97 == NULL)
+ return -ENODEV;
+
+ /* Go you big red fire engine */
+ for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+ if (wm->id != cinfo[idx].id)
+ continue;
+ sp_idx = idx;
+ if (cont_rate <= cinfo[idx].speed)
+ break;
+ }
+ wm->acc_rate = cinfo[sp_idx].code;
+ wm->acc_slot = ac97_touch_slot;
+ dev_info(wm->dev,
+ "zylonite accelerated touchscreen driver, %d samples/sec\n",
+ cinfo[sp_idx].speed);
+
+ return 0;
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+ if (enable)
+ enable_irq(wm->pen_irq);
+ else
+ disable_irq_nosync(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops zylonite_mach_ops = {
+ .acc_enabled = 1,
+ .acc_pen_up = wm97xx_acc_pen_up,
+ .acc_pen_down = wm97xx_acc_pen_down,
+ .acc_startup = wm97xx_acc_startup,
+ .irq_enable = wm97xx_irq_enable,
+ .irq_gpio = WM97XX_GPIO_2,
+};
+
+static int zylonite_wm97xx_probe(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+ int gpio_touch_irq;
+
+ if (cpu_is_pxa320())
+ gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15);
+ else
+ gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+ wm->pen_irq = IRQ_GPIO(gpio_touch_irq);
+ set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
+
+ wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+ WM97XX_GPIO_POL_HIGH,
+ WM97XX_GPIO_STICKY,
+ WM97XX_GPIO_WAKE);
+ wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+ WM97XX_GPIO_POL_HIGH,
+ WM97XX_GPIO_NOTSTICKY,
+ WM97XX_GPIO_NOWAKE);
+
+ return wm97xx_register_mach_ops(wm, &zylonite_mach_ops);
+}
+
+static int zylonite_wm97xx_remove(struct platform_device *pdev)
+{
+ struct wm97xx *wm = platform_get_drvdata(pdev);
+
+ wm97xx_unregister_mach_ops(wm);
+
+ return 0;
+}
+
+static struct platform_driver zylonite_wm97xx_driver = {
+ .probe = zylonite_wm97xx_probe,
+ .remove = zylonite_wm97xx_remove,
+ .driver = {
+ .name = "wm97xx-touch",
+ },
+};
+
+static int __init zylonite_wm97xx_init(void)
+{
+ return platform_driver_register(&zylonite_wm97xx_driver);
+}
+
+static void __exit zylonite_wm97xx_exit(void)
+{
+ platform_driver_unregister(&zylonite_wm97xx_driver);
+}
+
+module_init(zylonite_wm97xx_init);
+module_exit(zylonite_wm97xx_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite");
+MODULE_LICENSE("GPL");
}
}
- kfree(s->s_options);
- s->s_options = new_opt;
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ replace_mount_options(s, new_opt);
config.setuid = setuid;
config.setgid = setgid;
config.uid = uid;
config.gid = gid;
config.mode = mode;
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
+
return 0;
}
if (!inode)
return;
inode->i_ino = number+2;
+
+ dentry = get_node(number);
+
+ /* config contents is protected by root's i_mutex */
inode->i_uid = config.setuid ? config.uid : current_fsuid();
inode->i_gid = config.setgid ? config.gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|config.mode, device);
//inode->i_op = &capifs_file_inode_operations;
- dentry = get_node(number);
if (!IS_ERR(dentry) && !dentry->d_inode)
d_instantiate(dentry, inode);
mutex_unlock(&capifs_root->d_inode->i_mutex);
mutex_unlock(&ap->recv_mtx);
}
+/**
+ * capi_ctr_handle_message() - handle incoming CAPI message
+ * @card: controller descriptor structure.
+ * @appl: application ID.
+ * @skb: message.
+ *
+ * Called by hardware driver to pass a CAPI message to the application.
+ */
+
void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb)
{
struct capi20_appl *ap;
EXPORT_SYMBOL(capi_ctr_handle_message);
+/**
+ * capi_ctr_ready() - signal CAPI controller ready
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to signal that the controller is up and running.
+ */
+
void capi_ctr_ready(struct capi_ctr * card)
{
card->cardstate = CARD_RUNNING;
EXPORT_SYMBOL(capi_ctr_ready);
+/**
+ * capi_ctr_reseted() - signal CAPI controller reset
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to signal that the controller is down and
+ * unavailable for use.
+ */
+
void capi_ctr_reseted(struct capi_ctr * card)
{
u16 appl;
EXPORT_SYMBOL(capi_ctr_reseted);
+/**
+ * capi_ctr_suspend_output() - suspend controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to stop data flow.
+ */
+
void capi_ctr_suspend_output(struct capi_ctr *card)
{
if (!card->blocked) {
EXPORT_SYMBOL(capi_ctr_suspend_output);
+/**
+ * capi_ctr_resume_output() - resume controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to resume data flow.
+ */
+
void capi_ctr_resume_output(struct capi_ctr *card)
{
if (card->blocked) {
/* ------------------------------------------------------------- */
+/**
+ * attach_capi_ctr() - register CAPI controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to register a controller with the CAPI subsystem.
+ * Return value: 0 on success, error code < 0 on error
+ */
+
int
attach_capi_ctr(struct capi_ctr *card)
{
EXPORT_SYMBOL(attach_capi_ctr);
+/**
+ * detach_capi_ctr() - unregister CAPI controller
+ * @card: controller descriptor structure.
+ *
+ * Called by hardware driver to remove the registration of a controller
+ * with the CAPI subsystem.
+ * Return value: 0 on success, error code < 0 on error
+ */
+
int detach_capi_ctr(struct capi_ctr *card)
{
if (card->cardstate != CARD_DETECTED)
EXPORT_SYMBOL(detach_capi_ctr);
+/**
+ * register_capi_driver() - register CAPI driver
+ * @driver: driver descriptor structure.
+ *
+ * Called by hardware driver to register itself with the CAPI subsystem.
+ */
+
void register_capi_driver(struct capi_driver *driver)
{
unsigned long flags;
EXPORT_SYMBOL(register_capi_driver);
+/**
+ * unregister_capi_driver() - unregister CAPI driver
+ * @driver: driver descriptor structure.
+ *
+ * Called by hardware driver to unregister itself from the CAPI subsystem.
+ */
+
void unregister_capi_driver(struct capi_driver *driver)
{
unsigned long flags;
/* -------- CAPI2.0 Interface ---------------------------------- */
/* ------------------------------------------------------------- */
+/**
+ * capi20_isinstalled() - CAPI 2.0 operation CAPI_INSTALLED
+ *
+ * Return value: CAPI result code (CAPI_NOERROR if at least one ISDN controller
+ * is ready for use, CAPI_REGNOTINSTALLED otherwise)
+ */
+
u16 capi20_isinstalled(void)
{
int i;
EXPORT_SYMBOL(capi20_isinstalled);
+/**
+ * capi20_register() - CAPI 2.0 operation CAPI_REGISTER
+ * @ap: CAPI application descriptor structure.
+ *
+ * Register an application's presence with CAPI.
+ * A unique application ID is assigned and stored in @ap->applid.
+ * After this function returns successfully, the message receive
+ * callback function @ap->recv_message() may be called at any time
+ * until capi20_release() has been called for the same @ap.
+ * Return value: CAPI result code
+ */
+
u16 capi20_register(struct capi20_appl *ap)
{
int i;
EXPORT_SYMBOL(capi20_register);
+/**
+ * capi20_release() - CAPI 2.0 operation CAPI_RELEASE
+ * @ap: CAPI application descriptor structure.
+ *
+ * Terminate an application's registration with CAPI.
+ * After this function returns successfully, the message receive
+ * callback function @ap->recv_message() will no longer be called.
+ * Return value: CAPI result code
+ */
+
u16 capi20_release(struct capi20_appl *ap)
{
int i;
EXPORT_SYMBOL(capi20_release);
+/**
+ * capi20_put_message() - CAPI 2.0 operation CAPI_PUT_MESSAGE
+ * @ap: CAPI application descriptor structure.
+ * @skb: CAPI message.
+ *
+ * Transfer a single message to CAPI.
+ * Return value: CAPI result code
+ */
+
u16 capi20_put_message(struct capi20_appl *ap, struct sk_buff *skb)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_put_message);
+/**
+ * capi20_get_manufacturer() - CAPI 2.0 operation CAPI_GET_MANUFACTURER
+ * @contr: controller number.
+ * @buf: result buffer (64 bytes).
+ *
+ * Retrieve information about the manufacturer of the specified ISDN controller
+ * or (for @contr == 0) the driver itself.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_manufacturer(u32 contr, u8 *buf)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_get_manufacturer);
+/**
+ * capi20_get_version() - CAPI 2.0 operation CAPI_GET_VERSION
+ * @contr: controller number.
+ * @verp: result structure.
+ *
+ * Retrieve version information for the specified ISDN controller
+ * or (for @contr == 0) the driver itself.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_version(u32 contr, struct capi_version *verp)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_get_version);
+/**
+ * capi20_get_serial() - CAPI 2.0 operation CAPI_GET_SERIAL_NUMBER
+ * @contr: controller number.
+ * @serial: result buffer (8 bytes).
+ *
+ * Retrieve the serial number of the specified ISDN controller
+ * or (for @contr == 0) the driver itself.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_serial(u32 contr, u8 *serial)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_get_serial);
+/**
+ * capi20_get_profile() - CAPI 2.0 operation CAPI_GET_PROFILE
+ * @contr: controller number.
+ * @profp: result structure.
+ *
+ * Retrieve capability information for the specified ISDN controller
+ * or (for @contr == 0) the number of installed controllers.
+ * Return value: CAPI result code
+ */
+
u16 capi20_get_profile(u32 contr, struct capi_profile *profp)
{
struct capi_ctr *card;
}
#endif
+/**
+ * capi20_manufacturer() - CAPI 2.0 operation CAPI_MANUFACTURER
+ * @cmd: command.
+ * @data: parameter.
+ *
+ * Perform manufacturer specific command.
+ * Return value: CAPI result code
+ */
+
int capi20_manufacturer(unsigned int cmd, void __user *data)
{
struct capi_ctr *card;
EXPORT_SYMBOL(capi20_manufacturer);
/* temporary hack */
+
+/**
+ * capi20_set_callback() - set CAPI application notification callback function
+ * @ap: CAPI application descriptor structure.
+ * @callback: callback function (NULL to remove).
+ *
+ * If not NULL, the callback function will be called to notify the
+ * application of the addition or removal of a controller.
+ * The first argument (cmd) will tell whether the controller was added
+ * (KCI_CONTRUP) or removed (KCI_CONTRDOWN).
+ * The second argument (contr) will be the controller number.
+ * For cmd==KCI_CONTRUP the third argument (data) will be a pointer to the
+ * new controller's capability profile structure.
+ */
+
void capi20_set_callback(struct capi20_appl *ap,
void (*callback) (unsigned int cmd, __u32 contr, void *data))
{
return -EINVAL;
}
src = iwb->read;
- if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
+ if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
(read < src && limit >= src))) {
pr_err("isoc write buffer frame reservation violated\n");
return -EFAULT;
if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
/* Special case handling for pipe reset */
le16_to_cpus(&ctrl_msg->dr.wIndex);
-
- /* toggle is reset on clear */
- usb_settoggle(adapter->usb_dev,
- ctrl_msg->dr.wIndex & ~USB_DIR_IN,
- (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
- 0);
-
-
+ usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
}
if (ctrl_msg->complete)
if (!gpio_is_valid(template->gpio)) {
printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n",
template->gpio, template->name);
- return;
+ return 0;
}
ret = gpio_request(template->gpio, template->name);
/* segments.c: */
void setup_default_gdt_entries(struct lguest_ro_state *state);
void setup_guest_gdt(struct lg_cpu *cpu);
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num);
+void load_guest_gdt_entry(struct lg_cpu *cpu, unsigned int i,
+ u32 low, u32 hi);
void guest_load_tls(struct lg_cpu *cpu, unsigned long tls_array);
void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt);
void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
gdt[i] = cpu->arch.gdt[i];
}
-/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
- * We copy it from the Guest and tweak the entries. */
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num)
+/*H:620 This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */
+void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
{
/* We assume the Guest has the same number of GDT entries as the
* Host, otherwise we'd have to dynamically allocate the Guest GDT. */
if (num > ARRAY_SIZE(cpu->arch.gdt))
kill_guest(cpu, "too many gdt entries %i", num);
- /* We read the whole thing in, then fix it up. */
- __lgread(cpu, cpu->arch.gdt, table, num * sizeof(cpu->arch.gdt[0]));
- fixup_gdt_table(cpu, 0, ARRAY_SIZE(cpu->arch.gdt));
+ /* Set it up, then fix it. */
+ cpu->arch.gdt[num].a = lo;
+ cpu->arch.gdt[num].b = hi;
+ fixup_gdt_table(cpu, num, num+1);
/* Mark that the GDT changed so the core knows it has to copy it again,
* even if the Guest is run on the same CPU. */
cpu->changed |= CHANGED_GDT;
u8 insn[3] = {0xcd, 0x1f, 0x90};
__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
+ /* The above write might have caused a copy of that page to be made
+ * (if it was read-only). We need to make sure the Guest has
+ * up-to-date pagetables. As this doesn't happen often, we can just
+ * drop them all. */
+ guest_pagetable_clear_all(cpu);
}
static bool is_hypercall(struct lg_cpu *cpu)
if (emulate_insn(cpu))
return;
}
+ /* If KVM is active, the vmcall instruction triggers a
+ * General Protection Fault. Normally it triggers an
+ * invalid opcode fault (6): */
+ case 6:
+ /* We need to check if ring == GUEST_PL and
+ * faulting instruction == vmcall. */
+ if (is_hypercall(cpu)) {
+ rewrite_hypercall(cpu);
+ return;
+ }
break;
case 14: /* We've intercepted a Page Fault. */
/* The Guest accessed a virtual address that wasn't mapped.
* up the pointer now to indicate a hypercall is pending. */
cpu->hcall = (struct hcall_args *)cpu->regs;
return;
- case 6:
- /* kvm hypercalls trigger an invalid opcode fault (6).
- * We need to check if ring == GUEST_PL and
- * faulting instruction == vmcall. */
- if (is_hypercall(cpu)) {
- rewrite_hypercall(cpu);
- return;
- }
- break;
}
/* We didn't handle the trap, so it needs to go to the Guest. */
int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
- case LHCALL_LOAD_GDT:
- load_guest_gdt(cpu, args->arg1, args->arg2);
+ case LHCALL_LOAD_GDT_ENTRY:
+ load_guest_gdt_entry(cpu, args->arg1, args->arg2, args->arg3);
break;
case LHCALL_LOAD_IDT_ENTRY:
load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3);
config PMAC_MEDIABAY
bool "Support PowerBook hotswap media bay"
- depends on PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32 && BLOCK
help
This option adds support for older PowerBook's hotswap media bay
that can contains batteries, floppy drives, or IDE devices. PCI
#include <linux/timer.h>
#include <linux/stddef.h>
#include <linux/init.h>
-#include <linux/ide.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/prom.h>
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
int irq, ide_hwif_t *hwif)
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
oldindex = index;
oldpage = page;
+ bitmap->filemap[bitmap->file_pages++] = page;
+ bitmap->last_page_size = count;
+
if (outofdate) {
/*
* if bitmap is out of date, dirty the
write_page(bitmap, page, 1);
ret = -EIO;
- if (bitmap->flags & BITMAP_WRITE_ERROR) {
- /* release, page not in filemap yet */
- put_page(page);
+ if (bitmap->flags & BITMAP_WRITE_ERROR)
goto err;
- }
}
-
- bitmap->filemap[bitmap->file_pages++] = page;
- bitmap->last_page_size = count;
}
paddr = kmap_atomic(page, KM_USER0);
if (bitmap->flags & BITMAP_HOSTENDIAN)
kunmap_atomic(paddr, KM_USER0);
if (b) {
/* if the disk bit is set, set the memory bit */
- bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap),
- ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start)
- );
+ int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap))
+ >= start);
+ bitmap_set_memory_bits(bitmap,
+ (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+ needed);
bit_cnt++;
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
}
bitmap->allclean = 1;
+ spin_lock_irqsave(&bitmap->lock, flags);
for (j = 0; j < bitmap->chunks; j++) {
bitmap_counter_t *bmc;
- spin_lock_irqsave(&bitmap->lock, flags);
- if (!bitmap->filemap) {
+ if (!bitmap->filemap)
/* error or shutdown */
- spin_unlock_irqrestore(&bitmap->lock, flags);
break;
- }
page = filemap_get_page(bitmap, j);
write_page(bitmap, page, 0);
bitmap->allclean = 0;
}
+ spin_lock_irqsave(&bitmap->lock, flags);
+ j |= (PAGE_BITS - 1);
continue;
}
spin_lock_irqsave(&bitmap->lock, flags);
clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
- bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
- &blocks, 0);
+ bmc = bitmap_get_counter(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
+ &blocks, 0);
if (bmc) {
/*
if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
} else if (*bmc == 1) {
/* we can clear the bit */
*bmc = 0;
- bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
+ bitmap_count_page(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
-1);
/* clear the bit */
ext2_clear_bit(file_page_offset(j), paddr);
kunmap_atomic(paddr, KM_USER0);
}
- }
- spin_unlock_irqrestore(&bitmap->lock, flags);
+ } else
+ j |= PAGE_COUNTER_MASK;
}
+ spin_unlock_irqrestore(&bitmap->lock, flags);
/* now sync the final page */
if (lastpage != NULL) {
s += blocks;
}
bitmap->last_end_sync = jiffies;
+ sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
}
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
unsigned long chunk;
for (chunk = s; chunk <= e; chunk++) {
- sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap);
+ sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap);
bitmap_set_memory_bits(bitmap, sec, 1);
bitmap_file_set_bit(bitmap, sec);
}
int bitmap_create(mddev_t *mddev)
{
struct bitmap *bitmap;
- unsigned long blocks = mddev->resync_max_sectors;
+ sector_t blocks = mddev->resync_max_sectors;
unsigned long chunks;
unsigned long pages;
struct file *file = mddev->bitmap_file;
bitmap->chunkshift = ffz(~bitmap->chunksize);
/* now that chunksize and chunkshift are set, we can use these macros */
- chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) /
- CHUNK_BLOCK_RATIO(bitmap);
+ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+ CHUNK_BLOCK_SHIFT(bitmap);
pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
BUG_ON(!pages);
+++ /dev/null
-/*
- * Copyright (C) 2004 Red Hat UK Ltd.
- *
- * This file is released under the GPL.
- */
-
-#ifndef DM_BIO_LIST_H
-#define DM_BIO_LIST_H
-
-#include <linux/bio.h>
-
-#ifdef CONFIG_BLOCK
-
-struct bio_list {
- struct bio *head;
- struct bio *tail;
-};
-
-static inline int bio_list_empty(const struct bio_list *bl)
-{
- return bl->head == NULL;
-}
-
-static inline void bio_list_init(struct bio_list *bl)
-{
- bl->head = bl->tail = NULL;
-}
-
-#define bio_list_for_each(bio, bl) \
- for (bio = (bl)->head; bio; bio = bio->bi_next)
-
-static inline unsigned bio_list_size(const struct bio_list *bl)
-{
- unsigned sz = 0;
- struct bio *bio;
-
- bio_list_for_each(bio, bl)
- sz++;
-
- return sz;
-}
-
-static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
-{
- bio->bi_next = NULL;
-
- if (bl->tail)
- bl->tail->bi_next = bio;
- else
- bl->head = bio;
-
- bl->tail = bio;
-}
-
-static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
-{
- bio->bi_next = bl->head;
-
- bl->head = bio;
-
- if (!bl->tail)
- bl->tail = bio;
-}
-
-static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
-{
- if (!bl2->head)
- return;
-
- if (bl->tail)
- bl->tail->bi_next = bl2->head;
- else
- bl->head = bl2->head;
-
- bl->tail = bl2->tail;
-}
-
-static inline void bio_list_merge_head(struct bio_list *bl,
- struct bio_list *bl2)
-{
- if (!bl2->head)
- return;
-
- if (bl->head)
- bl2->tail->bi_next = bl->head;
- else
- bl->tail = bl2->tail;
-
- bl->head = bl2->head;
-}
-
-static inline struct bio *bio_list_pop(struct bio_list *bl)
-{
- struct bio *bio = bl->head;
-
- if (bio) {
- bl->head = bl->head->bi_next;
- if (!bl->head)
- bl->tail = NULL;
-
- bio->bi_next = NULL;
- }
-
- return bio;
-}
-
-static inline struct bio *bio_list_get(struct bio_list *bl)
-{
- struct bio *bio = bl->head;
-
- bl->head = bl->tail = NULL;
-
- return bio;
-}
-
-#endif /* CONFIG_BLOCK */
-#endif
#include <linux/device-mapper.h>
-#include "dm-bio-list.h"
-
#define DM_MSG_PREFIX "delay"
struct delay_c {
return dm_table_complete(table);
}
+static int table_prealloc_integrity(struct dm_table *t,
+ struct mapped_device *md)
+{
+ struct list_head *devices = dm_table_get_devices(t);
+ struct dm_dev_internal *dd;
+
+ list_for_each_entry(dd, devices, list)
+ if (bdev_get_integrity(dd->dm_dev.bdev))
+ return blk_integrity_register(dm_disk(md), NULL);
+
+ return 0;
+}
+
static int table_load(struct dm_ioctl *param, size_t param_size)
{
int r;
goto out;
}
+ r = table_prealloc_integrity(t, md);
+ if (r) {
+ DMERR("%s: could not register integrity profile.",
+ dm_device_name(md));
+ dm_table_destroy(t);
+ goto out;
+ }
+
down_write(&_hash_lock);
hc = dm_get_mdptr(md);
if (!hc || hc->md != md) {
dm_kcopyd_notify_fn fn = job->fn;
struct dm_kcopyd_client *kc = job->kc;
- kcopyd_put_pages(kc, job->pages);
+ if (job->pages)
+ kcopyd_put_pages(kc, job->pages);
mempool_free(job, kc->job_pool);
fn(read_err, write_err, context);
sector_t progress = 0;
sector_t count = 0;
struct kcopyd_job *job = (struct kcopyd_job *) context;
+ struct dm_kcopyd_client *kc = job->kc;
mutex_lock(&job->lock);
if (count) {
int i;
- struct kcopyd_job *sub_job = mempool_alloc(job->kc->job_pool,
+ struct kcopyd_job *sub_job = mempool_alloc(kc->job_pool,
GFP_NOIO);
*sub_job = *job;
} else if (atomic_dec_and_test(&job->sub_jobs)) {
/*
- * To avoid a race we must keep the job around
- * until after the notify function has completed.
- * Otherwise the client may try and stop the job
- * after we've completed.
+ * Queue the completion callback to the kcopyd thread.
+ *
+ * Some callers assume that all the completions are called
+ * from a single thread and don't race with each other.
+ *
+ * We must not call the callback directly here because this
+ * code may not be executing in the thread.
*/
- job->fn(read_err, write_err, job->context);
- mempool_free(job, job->kc->job_pool);
+ push(&kc->complete_jobs, job);
+ wake(kc);
}
}
{
int i;
+ atomic_inc(&job->kc->nr_jobs);
+
atomic_set(&job->sub_jobs, SPLIT_COUNT);
for (i = 0; i < SPLIT_COUNT; i++)
segment_complete(0, 0u, job);
.status = linear_status,
.ioctl = linear_ioctl,
.merge = linear_merge,
- .features = DM_TARGET_SUPPORTS_BARRIERS,
};
int __init dm_linear_init(void)
#include <linux/device-mapper.h>
#include "dm-path-selector.h"
-#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include "dm-uevent.h"
* This file is released under the GPL.
*/
-#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include <linux/init.h>
#include <linux/vmalloc.h>
#include "dm.h"
-#include "dm-bio-list.h"
#define DM_MSG_PREFIX "region hash"
#include <linux/workqueue.h>
#include "dm-exception-store.h"
-#include "dm-bio-list.h"
#define DM_MSG_PREFIX "snapshots"
sector_t *highs;
struct dm_target *targets;
- unsigned barriers_supported:1;
-
/*
* Indicates the rw permissions for the new logical
* device. This should be a combination of FMODE_READ
INIT_LIST_HEAD(&t->devices);
atomic_set(&t->holders, 0);
- t->barriers_supported = 1;
if (!num_targets)
num_targets = KEYS_PER_NODE;
/* FIXME: the plan is to combine high here and then have
* the merge fn apply the target level restrictions. */
combine_restrictions_low(&t->limits, &tgt->limits);
-
- if (!(tgt->type->features & DM_TARGET_SUPPORTS_BARRIERS))
- t->barriers_supported = 0;
-
return 0;
bad:
check_for_valid_limits(&t->limits);
- /*
- * We only support barriers if there is exactly one underlying device.
- */
- if (!list_is_singular(&t->devices))
- t->barriers_supported = 0;
-
/* how many indexes will the btree have ? */
leaf_nodes = dm_div_up(t->num_targets, KEYS_PER_NODE);
t->depth = 1 + int_log(leaf_nodes, CHILDREN_PER_NODE);
return &t->targets[(KEYS_PER_NODE * n) + k];
}
+/*
+ * Set the integrity profile for this device if all devices used have
+ * matching profiles.
+ */
+static void dm_table_set_integrity(struct dm_table *t)
+{
+ struct list_head *devices = dm_table_get_devices(t);
+ struct dm_dev_internal *prev = NULL, *dd = NULL;
+
+ if (!blk_get_integrity(dm_disk(t->md)))
+ return;
+
+ list_for_each_entry(dd, devices, list) {
+ if (prev &&
+ blk_integrity_compare(prev->dm_dev.bdev->bd_disk,
+ dd->dm_dev.bdev->bd_disk) < 0) {
+ DMWARN("%s: integrity not set: %s and %s mismatch",
+ dm_device_name(t->md),
+ prev->dm_dev.bdev->bd_disk->disk_name,
+ dd->dm_dev.bdev->bd_disk->disk_name);
+ goto no_integrity;
+ }
+ prev = dd;
+ }
+
+ if (!prev || !bdev_get_integrity(prev->dm_dev.bdev))
+ goto no_integrity;
+
+ blk_integrity_register(dm_disk(t->md),
+ bdev_get_integrity(prev->dm_dev.bdev));
+
+ return;
+
+no_integrity:
+ blk_integrity_register(dm_disk(t->md), NULL);
+
+ return;
+}
+
void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q)
{
/*
else
queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
+ dm_table_set_integrity(t);
}
unsigned int dm_table_get_num_targets(struct dm_table *t)
return t->md;
}
-int dm_table_barrier_ok(struct dm_table *t)
-{
- return t->barriers_supported;
-}
-EXPORT_SYMBOL(dm_table_barrier_ok);
-
EXPORT_SYMBOL(dm_vcalloc);
EXPORT_SYMBOL(dm_get_device);
EXPORT_SYMBOL(dm_put_device);
*/
#include "dm.h"
-#include "dm-bio-list.h"
#include "dm-uevent.h"
#include <linux/init.h>
/*
* Bits for the md->flags field.
*/
-#define DMF_BLOCK_IO 0
+#define DMF_BLOCK_IO_FOR_SUSPEND 0
#define DMF_SUSPENDED 1
#define DMF_FROZEN 2
#define DMF_FREEING 3
#define DMF_DELETING 4
#define DMF_NOFLUSH_SUSPENDING 5
+#define DMF_QUEUE_IO_TO_THREAD 6
/*
* Work processed by per-device workqueue.
struct bio_list deferred;
spinlock_t deferred_lock;
+ /*
+ * An error from the barrier request currently being processed.
+ */
+ int barrier_error;
+
/*
* Processing queue (flush/barriers)
*/
part_stat_add(cpu, &dm_disk(md)->part0, ticks[rw], duration);
part_stat_unlock();
+ /*
+ * After this is decremented the bio must not be touched if it is
+ * a barrier.
+ */
dm_disk(md)->part0.in_flight = pending =
atomic_dec_return(&md->pending);
/*
* Add the bio to the list of deferred io.
*/
-static int queue_io(struct mapped_device *md, struct bio *bio)
+static void queue_io(struct mapped_device *md, struct bio *bio)
{
down_write(&md->io_lock);
- if (!test_bit(DMF_BLOCK_IO, &md->flags)) {
- up_write(&md->io_lock);
- return 1;
- }
-
spin_lock_irq(&md->deferred_lock);
bio_list_add(&md->deferred, bio);
spin_unlock_irq(&md->deferred_lock);
+ if (!test_and_set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags))
+ queue_work(md->wq, &md->work);
+
up_write(&md->io_lock);
- return 0; /* deferred successfully */
}
/*
*/
spin_lock_irqsave(&md->deferred_lock, flags);
if (__noflush_suspending(md))
- bio_list_add(&md->deferred, io->bio);
+ bio_list_add_head(&md->deferred, io->bio);
else
/* noflush suspend was interrupted. */
io->error = -EIO;
spin_unlock_irqrestore(&md->deferred_lock, flags);
}
- end_io_acct(io);
-
io_error = io->error;
bio = io->bio;
- free_io(md, io);
+ if (bio_barrier(bio)) {
+ /*
+ * There can be just one barrier request so we use
+ * a per-device variable for error reporting.
+ * Note that you can't touch the bio after end_io_acct
+ */
+ md->barrier_error = io_error;
+ end_io_acct(io);
+ } else {
+ end_io_acct(io);
- if (io_error != DM_ENDIO_REQUEUE) {
- trace_block_bio_complete(md->queue, bio);
+ if (io_error != DM_ENDIO_REQUEUE) {
+ trace_block_bio_complete(md->queue, bio);
- bio_endio(bio, io_error);
+ bio_endio(bio, io_error);
+ }
}
+
+ free_io(md, io);
}
}
clone->bi_sector = sector;
clone->bi_bdev = bio->bi_bdev;
- clone->bi_rw = bio->bi_rw;
+ clone->bi_rw = bio->bi_rw & ~(1 << BIO_RW_BARRIER);
clone->bi_vcnt = 1;
clone->bi_size = to_bytes(len);
clone->bi_io_vec->bv_offset = offset;
clone->bi_io_vec->bv_len = clone->bi_size;
clone->bi_flags |= 1 << BIO_CLONED;
+ if (bio_integrity(bio)) {
+ bio_integrity_clone(clone, bio, GFP_NOIO);
+ bio_integrity_trim(clone,
+ bio_sector_offset(bio, idx, offset), len);
+ }
+
return clone;
}
clone = bio_alloc_bioset(GFP_NOIO, bio->bi_max_vecs, bs);
__bio_clone(clone, bio);
+ clone->bi_rw &= ~(1 << BIO_RW_BARRIER);
clone->bi_destructor = dm_bio_destructor;
clone->bi_sector = sector;
clone->bi_idx = idx;
clone->bi_size = to_bytes(len);
clone->bi_flags &= ~(1 << BIO_SEG_VALID);
+ if (bio_integrity(bio)) {
+ bio_integrity_clone(clone, bio, GFP_NOIO);
+
+ if (idx != bio->bi_idx || clone->bi_size < bio->bi_size)
+ bio_integrity_trim(clone,
+ bio_sector_offset(bio, idx, 0), len);
+ }
+
return clone;
}
ci.map = dm_get_table(md);
if (unlikely(!ci.map)) {
- bio_io_error(bio);
- return;
- }
- if (unlikely(bio_barrier(bio) && !dm_table_barrier_ok(ci.map))) {
- dm_table_put(ci.map);
- bio_endio(bio, -EOPNOTSUPP);
+ if (!bio_barrier(bio))
+ bio_io_error(bio);
+ else
+ md->barrier_error = -EIO;
return;
}
+
ci.md = md;
ci.bio = bio;
ci.io = alloc_io(md);
*/
static int dm_request(struct request_queue *q, struct bio *bio)
{
- int r = -EIO;
int rw = bio_data_dir(bio);
struct mapped_device *md = q->queuedata;
int cpu;
part_stat_unlock();
/*
- * If we're suspended we have to queue
- * this io for later.
+ * If we're suspended or the thread is processing barriers
+ * we have to queue this io for later.
*/
- while (test_bit(DMF_BLOCK_IO, &md->flags)) {
+ if (unlikely(test_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags)) ||
+ unlikely(bio_barrier(bio))) {
up_read(&md->io_lock);
- if (bio_rw(bio) != READA)
- r = queue_io(md, bio);
+ if (unlikely(test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) &&
+ bio_rw(bio) == READA) {
+ bio_io_error(bio);
+ return 0;
+ }
- if (r <= 0)
- goto out_req;
+ queue_io(md, bio);
- /*
- * We're in a while loop, because someone could suspend
- * before we get to the following read lock.
- */
- down_read(&md->io_lock);
+ return 0;
}
__split_and_process_bio(md, bio);
up_read(&md->io_lock);
return 0;
-
-out_req:
- if (r < 0)
- bio_io_error(bio);
-
- return 0;
}
static void dm_unplug_all(struct request_queue *q)
struct mapped_device *md = congested_data;
struct dm_table *map;
- if (!test_bit(DMF_BLOCK_IO, &md->flags)) {
+ if (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) {
map = dm_get_table(md);
if (map) {
r = dm_table_any_congested(map, bdi_bits);
mempool_destroy(md->tio_pool);
mempool_destroy(md->io_pool);
bioset_free(md->bs);
+ blk_integrity_unregister(md->disk);
del_gendisk(md->disk);
free_minor(minor);
return r;
}
+static int dm_flush(struct mapped_device *md)
+{
+ dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE);
+ return 0;
+}
+
+static void process_barrier(struct mapped_device *md, struct bio *bio)
+{
+ int error = dm_flush(md);
+
+ if (unlikely(error)) {
+ bio_endio(bio, error);
+ return;
+ }
+ if (bio_empty_barrier(bio)) {
+ bio_endio(bio, 0);
+ return;
+ }
+
+ __split_and_process_bio(md, bio);
+
+ error = dm_flush(md);
+
+ if (!error && md->barrier_error)
+ error = md->barrier_error;
+
+ if (md->barrier_error != DM_ENDIO_REQUEUE)
+ bio_endio(bio, error);
+}
+
/*
* Process the deferred bios
*/
down_write(&md->io_lock);
-next_bio:
- spin_lock_irq(&md->deferred_lock);
- c = bio_list_pop(&md->deferred);
- spin_unlock_irq(&md->deferred_lock);
+ while (!test_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags)) {
+ spin_lock_irq(&md->deferred_lock);
+ c = bio_list_pop(&md->deferred);
+ spin_unlock_irq(&md->deferred_lock);
- if (c) {
- __split_and_process_bio(md, c);
- goto next_bio;
- }
+ if (!c) {
+ clear_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags);
+ break;
+ }
- clear_bit(DMF_BLOCK_IO, &md->flags);
+ up_write(&md->io_lock);
+
+ if (bio_barrier(c))
+ process_barrier(md, c);
+ else
+ __split_and_process_bio(md, c);
+
+ down_write(&md->io_lock);
+ }
up_write(&md->io_lock);
}
static void dm_queue_flush(struct mapped_device *md)
{
+ clear_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
+ smp_mb__after_clear_bit();
queue_work(md->wq, &md->work);
- flush_workqueue(md->wq);
}
/*
}
/*
- * First we set the BLOCK_IO flag so no more ios will be mapped.
+ * Here we must make sure that no processes are submitting requests
+ * to target drivers i.e. no one may be executing
+ * __split_and_process_bio. This is called from dm_request and
+ * dm_wq_work.
+ *
+ * To get all processes out of __split_and_process_bio in dm_request,
+ * we take the write lock. To prevent any process from reentering
+ * __split_and_process_bio from dm_request, we set
+ * DMF_QUEUE_IO_TO_THREAD.
+ *
+ * To quiesce the thread (dm_wq_work), we set DMF_BLOCK_IO_FOR_SUSPEND
+ * and call flush_workqueue(md->wq). flush_workqueue will wait until
+ * dm_wq_work exits and DMF_BLOCK_IO_FOR_SUSPEND will prevent any
+ * further calls to __split_and_process_bio from dm_wq_work.
*/
down_write(&md->io_lock);
- set_bit(DMF_BLOCK_IO, &md->flags);
-
+ set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
+ set_bit(DMF_QUEUE_IO_TO_THREAD, &md->flags);
up_write(&md->io_lock);
+ flush_workqueue(md->wq);
+
/*
- * Wait for the already-mapped ios to complete.
+ * At this point no more requests are entering target request routines.
+ * We call dm_wait_for_completion to wait for all existing requests
+ * to finish.
*/
r = dm_wait_for_completion(md, TASK_INTERRUPTIBLE);
down_write(&md->io_lock);
-
if (noflush)
clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
up_write(&md->io_lock);
goto out; /* pushback list is already flushed, so skip flush */
}
+ /*
+ * If dm_wait_for_completion returned 0, the device is completely
+ * quiescent now. There is no request-processing activity. All new
+ * requests are being added to md->deferred list.
+ */
+
dm_table_postsuspend_targets(map);
set_bit(DMF_SUSPENDED, &md->flags);
* To check the return value from dm_table_find_target().
*/
#define dm_target_is_valid(t) ((t)->table)
-int dm_table_barrier_ok(struct dm_table *t);
/*-----------------------------------------------------------------
* A registry of target types.
sb->raid_disks = cpu_to_le32(mddev->raid_disks);
sb->size = cpu_to_le64(mddev->dev_sectors);
+ sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9);
+ sb->level = cpu_to_le32(mddev->level);
+ sb->layout = cpu_to_le32(mddev->layout);
if (mddev->bitmap && mddev->bitmap_file == NULL) {
sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
clear_bit(MD_CHANGE_PENDING, &mddev->flags);
spin_unlock_irq(&mddev->write_lock);
wake_up(&mddev->sb_wait);
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
* -writemostly - clears write_mostly
* blocked - sets the Blocked flag
* -blocked - clears the Blocked flag
+ * insync - sets Insync providing device isn't active
*/
int err = -EINVAL;
if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery);
md_wakeup_thread(rdev->mddev->thread);
+ err = 0;
+ } else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
+ set_bit(In_sync, &rdev->flags);
err = 0;
}
if (!err && rdev->sysfs_state)
} else if (rdev->mddev->pers) {
mdk_rdev_t *rdev2;
/* Activating a spare .. or possibly reactivating
- * if we every get bitmaps working here.
+ * if we ever get bitmaps working here.
*/
if (rdev->raid_disk != -1)
} else
err = -EBUSY;
spin_unlock_irq(&mddev->write_lock);
- } else {
- mddev->ro = 0;
- mddev->recovery_cp = MaxSector;
- err = do_md_run(mddev);
- }
+ } else
+ err = -EINVAL;
break;
case active:
if (mddev->pers) {
action_show(mddev_t *mddev, char *page)
{
char *type = "idle";
- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
+ if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery))
+ type = "frozen";
+ else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
(!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) {
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
type = "reshape";
if (!mddev->pers || !mddev->pers->sync_request)
return -EINVAL;
- if (cmd_match(page, "idle")) {
+ if (cmd_match(page, "frozen"))
+ set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ else
+ clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (cmd_match(page, "idle") || cmd_match(page, "frozen")) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_unregister_thread(mddev->sync_thread);
{
unsigned long max_sectors, resync;
+ if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ return sprintf(page, "none\n");
+
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
else
max_sectors = mddev->dev_sectors;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+ resync = mddev->curr_resync_completed;
return sprintf(page, "%lu / %lu\n", resync, max_sectors);
}
if (strict_blocks_to_sectors(buf, §ors) < 0)
return -EINVAL;
if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors)
- return -EINVAL;
+ return -E2BIG;
mddev->external_size = 1;
}
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
+ mdk_rdev_t *rdev;
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ }
+
set_capacity(disk, 0);
mddev->changed = 1;
* Free resources if final stop
*/
if (mode == 0) {
- mdk_rdev_t *rdev;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
}
mddev->bitmap_offset = 0;
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0) {
- char nm[20];
- sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_remove_link(&mddev->kobj, nm);
- }
-
/* make sure all md_delayed_delete calls have finished */
flush_scheduled_work();
.owner = THIS_MODULE,
.open = md_open,
.release = md_release,
- .locked_ioctl = md_ioctl,
+ .ioctl = md_ioctl,
.getgeo = md_getgeo,
.media_changed = md_media_changed,
.revalidate_disk= md_revalidate,
static void status_resync(struct seq_file *seq, mddev_t * mddev)
{
- sector_t max_blocks, resync, res;
- unsigned long dt, db, rt;
+ sector_t max_sectors, resync, res;
+ unsigned long dt, db;
+ sector_t rt;
int scale;
unsigned int per_milli;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2;
+ resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
- max_blocks = mddev->resync_max_sectors >> 1;
+ max_sectors = mddev->resync_max_sectors;
else
- max_blocks = mddev->dev_sectors / 2;
+ max_sectors = mddev->dev_sectors;
/*
* Should not happen.
*/
- if (!max_blocks) {
+ if (!max_sectors) {
MD_BUG();
return;
}
/* Pick 'scale' such that (resync>>scale)*1000 will fit
- * in a sector_t, and (max_blocks>>scale) will fit in a
+ * in a sector_t, and (max_sectors>>scale) will fit in a
* u32, as those are the requirements for sector_div.
* Thus 'scale' must be at least 10
*/
scale = 10;
if (sizeof(sector_t) > sizeof(unsigned long)) {
- while ( max_blocks/2 > (1ULL<<(scale+32)))
+ while ( max_sectors/2 > (1ULL<<(scale+32)))
scale++;
}
res = (resync>>scale)*1000;
- sector_div(res, (u32)((max_blocks>>scale)+1));
+ sector_div(res, (u32)((max_sectors>>scale)+1));
per_milli = res;
{
(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ?
"resync" : "recovery"))),
per_milli/10, per_milli % 10,
- (unsigned long long) resync,
- (unsigned long long) max_blocks);
+ (unsigned long long) resync/2,
+ (unsigned long long) max_sectors/2);
/*
- * We do not want to overflow, so the order of operands and
- * the * 100 / 100 trick are important. We do a +1 to be
- * safe against division by zero. We only estimate anyway.
- *
* dt: time from mark until now
* db: blocks written from mark until now
* rt: remaining time
+ *
+ * rt is a sector_t, so could be 32bit or 64bit.
+ * So we divide before multiply in case it is 32bit and close
+ * to the limit.
+ * We scale the divisor (db) by 32 to avoid loosing precision
+ * near the end of resync when the number of remaining sectors
+ * is close to 'db'.
+ * We then divide rt by 32 after multiplying by db to compensate.
+ * The '+1' avoids division by zero if db is very small.
*/
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
- mddev->resync_mark_cnt;
- rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
- seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
+ rt = max_sectors - resync; /* number of remaining sectors */
+ sector_div(rt, db/32+1);
+ rt *= dt;
+ rt >>= 5;
+
+ seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60,
+ ((unsigned long)rt % 60)/6);
seq_printf(seq, " speed=%ldK/sec", db/2/dt);
}
return 0;
}
-static struct seq_operations md_seq_ops = {
+static const struct seq_operations md_seq_ops = {
.start = md_seq_start,
.next = md_seq_next,
.stop = md_seq_stop,
sector_t sectors;
skipped = 0;
- if (j >= mddev->resync_max) {
- sysfs_notify(&mddev->kobj, NULL, "sync_completed");
- wait_event(mddev->recovery_wait,
- mddev->resync_max > j
- || kthread_should_stop());
- }
- if (kthread_should_stop())
- goto interrupted;
- if (mddev->curr_resync > mddev->curr_resync_completed &&
- (mddev->curr_resync - mddev->curr_resync_completed)
- > (max_sectors >> 4)) {
+ if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
+ ((mddev->curr_resync > mddev->curr_resync_completed &&
+ (mddev->curr_resync - mddev->curr_resync_completed)
+ > (max_sectors >> 4)) ||
+ (j - mddev->curr_resync_completed)*2
+ >= mddev->resync_max - mddev->curr_resync_completed
+ )) {
/* time to update curr_resync_completed */
blk_unplug(mddev->queue);
wait_event(mddev->recovery_wait,
mddev->curr_resync_completed =
mddev->curr_resync;
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
+
+ if (j >= mddev->resync_max)
+ wait_event(mddev->recovery_wait,
+ mddev->resync_max > j
+ || kthread_should_stop());
+
+ if (kthread_should_stop())
+ goto interrupted;
+
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
skip:
mddev->curr_resync = 0;
+ mddev->curr_resync_completed = 0;
mddev->resync_min = 0;
mddev->resync_max = MaxSector;
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef _MD_K_H
-#define _MD_K_H
-
-#ifdef CONFIG_BLOCK
+#ifndef _MD_MD_H
+#define _MD_MD_H
+
+#include <linux/blkdev.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
#define MaxSector (~(sector_t)0)
if (p) put_page(p);
}
-#endif /* CONFIG_BLOCK */
-#endif
-
-
extern int register_md_personality(struct mdk_personality *p);
extern int unregister_md_personality(struct mdk_personality *p);
extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
extern int md_allow_write(mddev_t *mddev);
extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
+
+#endif /* _MD_MD_H */
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include "md.h"
-#include "dm-bio-list.h"
#include "raid1.h"
#include "bitmap.h"
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include "md.h"
-#include "dm-bio-list.h"
#include "raid10.h"
#include "bitmap.h"
r10_bio->sector = sect;
raid10_find_phys(conf, r10_bio);
- /* Need to check if this section will still be
+
+ /* Need to check if the array will still be
* degraded
*/
- for (j=0; j<conf->copies;j++) {
- int d = r10_bio->devs[j].devnum;
- if (conf->mirrors[d].rdev == NULL ||
- test_bit(Faulty, &conf->mirrors[d].rdev->flags)) {
+ for (j=0; j<conf->raid_disks; j++)
+ if (conf->mirrors[j].rdev == NULL ||
+ test_bit(Faulty, &conf->mirrors[j].rdev->flags)) {
still_degraded = 1;
break;
}
- }
+
must_sync = bitmap_start_sync(mddev->bitmap, sect,
&sync_blocks, still_degraded);
static struct stripe_head *
get_active_stripe(raid5_conf_t *conf, sector_t sector,
- int previous, int noblock)
+ int previous, int noblock, int noquiesce)
{
struct stripe_head *sh;
do {
wait_event_lock_irq(conf->wait_for_stripe,
- conf->quiesce == 0,
+ conf->quiesce == 0 || noquiesce,
conf->device_lock, /* nothing */);
sh = __find_stripe(conf, sector, conf->generation - previous);
if (!sh) {
sector_t bn = compute_blocknr(sh, i, 1);
sector_t s = raid5_compute_sector(conf, bn, 0,
&dd_idx, NULL);
- sh2 = get_active_stripe(conf, s, 0, 1);
+ sh2 = get_active_stripe(conf, s, 0, 1, 1);
if (sh2 == NULL)
/* so far only the early blocks of this stripe
* have been requested. When later blocks
/* Finish reconstruct operations initiated by the expansion process */
if (sh->reconstruct_state == reconstruct_state_result) {
struct stripe_head *sh2
- = get_active_stripe(conf, sh->sector, 1, 1);
+ = get_active_stripe(conf, sh->sector, 1, 1, 1);
if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
/* sh cannot be written until sh2 has been read.
* so arrange for sh to be delayed a little
if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
struct stripe_head *sh2
- = get_active_stripe(conf, sh->sector, 1, 1);
+ = get_active_stripe(conf, sh->sector, 1, 1, 1);
if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
/* sh cannot be written until sh2 has been read.
* so arrange for sh to be delayed a little
int i;
rcu_read_lock();
- for (i=0; i<mddev->raid_disks; i++) {
+ for (i = 0; i < conf->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
(unsigned long long)logical_sector);
sh = get_active_stripe(conf, new_sector, previous,
- (bi->bi_rw&RWA_MASK));
+ (bi->bi_rw&RWA_MASK), 0);
if (sh) {
if (unlikely(previous)) {
/* expansion might have moved on while waiting for a
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->delta_disks < 0) {
- writepos -= reshape_sectors;
+ writepos -= min_t(sector_t, reshape_sectors, writepos);
readpos += reshape_sectors;
safepos += reshape_sectors;
} else {
writepos += reshape_sectors;
- readpos -= reshape_sectors;
- safepos -= reshape_sectors;
+ readpos -= min_t(sector_t, reshape_sectors, readpos);
+ safepos -= min_t(sector_t, reshape_sectors, safepos);
}
/* 'writepos' is the most advanced device address we might write.
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes)==0);
mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
if (mddev->delta_disks < 0) {
for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
int j;
int skipped = 0;
- sh = get_active_stripe(conf, stripe_addr+i, 0, 0);
+ sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1);
set_bit(STRIPE_EXPANDING, &sh->state);
atomic_inc(&conf->reshape_stripes);
/* If any of this stripe is beyond the end of the old
raid5_compute_sector(conf, stripe_addr*(new_data_disks),
1, &dd_idx, NULL);
last_sector =
- raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512)
+ raid5_compute_sector(conf, ((stripe_addr+reshape_sectors)
*(new_data_disks) - 1),
1, &dd_idx, NULL);
if (last_sector >= mddev->dev_sectors)
last_sector = mddev->dev_sectors - 1;
while (first_sector <= last_sector) {
- sh = get_active_stripe(conf, first_sector, 1, 0);
+ sh = get_active_stripe(conf, first_sector, 1, 0, 1);
set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
* then we need to write out the superblock.
*/
sector_nr += reshape_sectors;
- if (sector_nr >= mddev->resync_max) {
+ if ((sector_nr - mddev->curr_resync_completed) * 2
+ >= mddev->resync_max - mddev->curr_resync_completed) {
/* Cannot proceed until we've updated the superblock... */
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes) == 0);
mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
return reshape_sectors;
}
bitmap_cond_end_sync(mddev->bitmap, sector_nr);
- sh = get_active_stripe(conf, sector_nr, 0, 1);
+ sh = get_active_stripe(conf, sector_nr, 0, 1, 0);
if (sh == NULL) {
- sh = get_active_stripe(conf, sector_nr, 0, 0);
+ sh = get_active_stripe(conf, sector_nr, 0, 0, 0);
/* make sure we don't swamp the stripe cache if someone else
* is trying to get access
*/
* We don't need to check the 'failed' flag as when that gets set,
* recovery aborts.
*/
- for (i=0; i<mddev->raid_disks; i++)
+ for (i = 0; i < conf->raid_disks; i++)
if (conf->disks[i].rdev == NULL)
still_degraded = 1;
/* already done this stripe */
continue;
- sh = get_active_stripe(conf, sector, 0, 1);
+ sh = get_active_stripe(conf, sector, 0, 1, 0);
if (!sh) {
/* failed to get a stripe - must wait */
download/extract it, and then copy it to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
- Say Y if you own such a card and want to use it.
-
-config DVB_AV7110_FIRMWARE
- bool "Compile AV7110 firmware into the driver"
- depends on DVB_AV7110 && !STANDALONE
- default y if DVB_AV7110=y
- help
- The AV7110 firmware is normally loaded by the firmware hotplug manager.
- If you want to compile the firmware into the driver you need to say
- Y here and provide the correct path of the firmware. You need this
- option if you want to compile the whole driver statically into the
- kernel.
+ Alternatively, you can download the file and use the kernel's
+ EXTRA_FIRMWARE configuration option to build it into your
+ kernel image by adding the filename to the EXTRA_FIRMWARE
+ configuration option string.
- All other people say N.
-
-config DVB_AV7110_FIRMWARE_FILE
- string "Full pathname of av7110 firmware file"
- depends on DVB_AV7110_FIRMWARE
- default "/usr/lib/hotplug/firmware/dvb-ttpci-01.fw"
+ Say Y if you own such a card and want to use it.
config DVB_AV7110_OSD
bool "AV7110 OSD support"
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
EXTRA_CFLAGS += -Idrivers/media/common/tuners
-
-hostprogs-y := fdump
-
-ifeq ($(CONFIG_DVB_AV7110_FIRMWARE),y)
-$(obj)/av7110.o: $(obj)/av7110_firm.h
-
-$(obj)/av7110_firm.h: $(obj)/fdump
- $(obj)/fdump $(CONFIG_DVB_AV7110_FIRMWARE_FILE) dvb_ttpci_fw $@
-endif
return 0;
}
-#ifdef CONFIG_DVB_AV7110_FIRMWARE_FILE
-#include "av7110_firm.h"
-static void put_firmware(struct av7110* av7110)
-{
- av7110->bin_fw = NULL;
-}
-
-static inline int get_firmware(struct av7110* av7110)
-{
- av7110->bin_fw = dvb_ttpci_fw;
- av7110->size_fw = sizeof(dvb_ttpci_fw);
- return check_firmware(av7110);
-}
-#else
static void put_firmware(struct av7110* av7110)
{
vfree(av7110->bin_fw);
release_firmware(fw);
return ret;
}
-#endif
-
static int alps_bsrv2_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
{
/* we cannot write av7110 DRAM directly, so load a bootloader into
* the DPRAM which implements a simple boot protocol */
-static u8 bootcode[] = {
- 0xea, 0x00, 0x00, 0x0e, 0xe1, 0xb0, 0xf0, 0x0e, 0xe2, 0x5e, 0xf0, 0x04,
- 0xe2, 0x5e, 0xf0, 0x04, 0xe2, 0x5e, 0xf0, 0x08, 0xe2, 0x5e, 0xf0, 0x04,
- 0xe2, 0x5e, 0xf0, 0x04, 0xe2, 0x5e, 0xf0, 0x04, 0x2c, 0x00, 0x00, 0x24,
- 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x00, 0x00, 0x34,
- 0x00, 0x00, 0x00, 0x00, 0xa5, 0xa5, 0x5a, 0x5a, 0x00, 0x1f, 0x15, 0x55,
- 0x00, 0x00, 0x00, 0x09, 0xe5, 0x9f, 0xd0, 0x7c, 0xe5, 0x9f, 0x40, 0x74,
- 0xe3, 0xa0, 0x00, 0x00, 0xe5, 0x84, 0x00, 0x00, 0xe5, 0x84, 0x00, 0x04,
- 0xe5, 0x9f, 0x10, 0x70, 0xe5, 0x9f, 0x20, 0x70, 0xe5, 0x9f, 0x30, 0x64,
- 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, 0xe1, 0x51, 0x00, 0x02,
- 0xda, 0xff, 0xff, 0xfb, 0xe5, 0x9f, 0xf0, 0x50, 0xe1, 0xd4, 0x10, 0xb0,
- 0xe3, 0x51, 0x00, 0x00, 0x0a, 0xff, 0xff, 0xfc, 0xe1, 0xa0, 0x10, 0x0d,
- 0xe5, 0x94, 0x30, 0x04, 0xe1, 0xd4, 0x20, 0xb2, 0xe2, 0x82, 0x20, 0x3f,
- 0xe1, 0xb0, 0x23, 0x22, 0x03, 0xa0, 0x00, 0x02, 0xe1, 0xc4, 0x00, 0xb0,
- 0x0a, 0xff, 0xff, 0xf4, 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0,
- 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, 0xe2, 0x52, 0x20, 0x01,
- 0x1a, 0xff, 0xff, 0xf9, 0xe2, 0x2d, 0xdb, 0x05, 0xea, 0xff, 0xff, 0xec,
- 0x2c, 0x00, 0x03, 0xf8, 0x2c, 0x00, 0x04, 0x00, 0x9e, 0x00, 0x08, 0x00,
- 0x2c, 0x00, 0x00, 0x74, 0x2c, 0x00, 0x00, 0xc0
-};
-
int av7110_bootarm(struct av7110 *av7110)
{
+ const struct firmware *fw;
+ const char *fw_name = "av7110/bootcode.bin";
struct saa7146_dev *dev = av7110->dev;
u32 ret;
int i;
//saa7146_setgpio(dev, DEBI_DONE_LINE, SAA7146_GPIO_INPUT);
//saa7146_setgpio(dev, 3, SAA7146_GPIO_INPUT);
- mwdebi(av7110, DEBISWAB, DPRAM_BASE, bootcode, sizeof(bootcode));
+ ret = request_firmware(&fw, fw_name, &dev->pci->dev);
+ if (ret) {
+ printk(KERN_ERR "dvb-ttpci: Failed to load firmware \"%s\"\n",
+ fw_name);
+ return ret;
+ }
+
+ mwdebi(av7110, DEBISWAB, DPRAM_BASE, fw->data, fw->size);
+ release_firmware(fw);
iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
av7110->arm_ready = 1;
return 0;
}
-
+MODULE_FIRMWARE("av7110/bootcode.bin");
/****************************************************************************
* DEBI command polling
}
/* buffer writes */
-static inline void mwdebi(struct av7110 *av7110, u32 config, int addr, u8 *val, int count)
+static inline void mwdebi(struct av7110 *av7110, u32 config, int addr,
+ const u8 *val, int count)
{
memcpy(av7110->debi_virt, val, count);
av7110_debiwrite(av7110, config, addr, 0, count);
+++ /dev/null
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-int main(int argc, char **argv)
-{
- unsigned char buf[8];
- unsigned int i, count, bytes = 0;
- FILE *fd_in, *fd_out;
-
- if (argc != 4) {
- fprintf(stderr, "\n\tusage: %s <ucode.bin> <array_name> <output_name>\n\n", argv[0]);
- return -1;
- }
-
- fd_in = fopen(argv[1], "rb");
- if (fd_in == NULL) {
- fprintf(stderr, "firmware file '%s' not found\n", argv[1]);
- return -1;
- }
-
- fd_out = fopen(argv[3], "w+");
- if (fd_out == NULL) {
- fprintf(stderr, "cannot create output file '%s'\n", argv[3]);
- return -1;
- }
-
- fprintf(fd_out, "\n#include <asm/types.h>\n\nu8 %s [] = {", argv[2]);
-
- while ((count = fread(buf, 1, 8, fd_in)) > 0) {
- fprintf(fd_out, "\n\t");
- for (i = 0; i < count; i++, bytes++)
- fprintf(fd_out, "0x%02x, ", buf[i]);
- }
-
- fprintf(fd_out, "\n};\n\n");
-
- fclose(fd_in);
- fclose(fd_out);
-
- return 0;
-}
mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
v->rangelow = RSF16_MINFREQ / mult;
v->rangehigh = RSF16_MAXFREQ / mult;
- v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = fmi->flags & V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_STEREO;
v->signal = fmi_getsigstr(fmi);
mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
v->rangelow = RSF16_MINFREQ / mult;
v->rangehigh = RSF16_MAXFREQ / mult;
- v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
V4L2_TUNER_MODE_MONO;
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
- goto unlock;
+ goto done;
}
/* stop rds reception */
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
- usb_set_intfdata(interface, dev);
-
/* Create the v4l2_device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
/* Digital TV */
au0828_dvb_register(dev);
+ /* Store the pointer to the au0828_dev so it can be accessed in
+ au0828_usb_disconnect */
+ usb_set_intfdata(interface, dev);
+
printk(KERN_INFO "Registered device AU0828 [%s]\n",
dev->board.name == NULL ? "Unset" : dev->board.name);
ret = __cafe_cam_reset(cam);
if (ret)
goto out;
+ chip.ident = V4L2_IDENT_NONE;
chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
chip.match.addr = cam->sensor_addr;
ret = sensor_call(cam, core, g_chip_ident, &chip);
/* handle muxer chips */
v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
- in->audio_input, 0, 0);
+ (u32) in->muxer_input, 0, 0);
err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
audio, s_routing, in->audio_input, 0, 0);
/* init + register i2c algo-bit adapter */
int init_cx18_i2c(struct cx18 *cx)
{
- int i;
+ int i, err;
CX18_DEBUG_I2C("i2c init\n");
for (i = 0; i < 2; i++) {
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
- return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
- i2c_bit_add_bus(&cx->i2c_adap[1]);
+ err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+ if (err)
+ goto err;
+ err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+ if (err)
+ goto err_del_bus_0;
+ return 0;
+
+ err_del_bus_0:
+ i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+ return err;
}
void exit_cx18_i2c(struct cx18 *cx)
config VIDEO_CX231XX
- tristate "Conexant cx231xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
- select VIDEO_IR
- select VIDEOBUF_VMALLOC
- select VIDEO_CX25840
- select VIDEO_CX231XX_ALSA
+ tristate "Conexant cx231xx USB video capture support"
+ depends on VIDEO_DEV && I2C && INPUT
+ select VIDEO_TUNER
+ select VIDEO_TVEEPROM
+ select VIDEO_IR
+ select VIDEOBUF_VMALLOC
+ select VIDEO_CX25840
---help---
This is a video4linux driver for Conexant 231xx USB based TV cards.
module will be called cx231xx
config VIDEO_CX231XX_ALSA
- tristate "Conexant Cx231xx ALSA audio module"
- depends on VIDEO_CX231XX && SND
- select SND_PCM
+ tristate "Conexant Cx231xx ALSA audio module"
+ depends on VIDEO_CX231XX && SND
+ select SND_PCM
- ---help---
- This is an ALSA driver for Cx231xx USB based TV cards.
+ ---help---
+ This is an ALSA driver for Cx231xx USB based TV cards.
- To compile this driver as a module, choose M here: the
- module will be called cx231xx-alsa
+ To compile this driver as a module, choose M here: the
+ module will be called cx231xx-alsa
config VIDEO_CX231XX_DVB
- tristate "DVB/ATSC Support for Cx231xx based TV cards"
- depends on VIDEO_CX231XX && DVB_CORE
- select VIDEOBUF_DVB
- select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
- ---help---
- This adds support for DVB cards based on the
- Conexant cx231xx chips.
+ tristate "DVB/ATSC Support for Cx231xx based TV cards"
+ depends on VIDEO_CX231XX && DVB_CORE
+ select VIDEOBUF_DVB
+ select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+
+ ---help---
+ This adds support for DVB cards based on the
+ Conexant cx231xx chips.
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
- if (port->nr == 0)
+ if (port->nr == 1)
bitmask = 0x01;
- else if (port->nr == 1)
+ else if (port->nr == 2)
bitmask = 0x04;
break;
}
.demod_address = 0x0f,
.if2 = 45600,
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct stv0900_config netup_stv0900_config = {
static struct xc2028_ctrl ctl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
- .scode_table = XC3028_FE_OREN538,
+ .demod = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
/* Generic utility functions */
int ivtv_msleep_timeout(unsigned int msecs, int intr)
{
- int ret;
int timeout = msecs_to_jiffies(msecs);
do {
set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
timeout = schedule_timeout(timeout);
- if (intr && (ret = signal_pending(current)))
- return ret;
+ if (intr) {
+ int ret = signal_pending(current);
+
+ if (ret)
+ return ret;
+ }
} while (timeout);
return 0;
}
mask = itv->card->gpio_audio_detect.mask;
if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask))
- vt->rxsubchans = V4L2_TUNER_MODE_STEREO |
- V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2;
+ vt->rxsubchans = V4L2_TUNER_SUB_STEREO |
+ V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
else
vt->rxsubchans = V4L2_TUNER_SUB_MONO;
return 0;
/* Wait for any DMA to finish */
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
- while (itv->i_flags & IVTV_F_I_DMA) {
+ while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
got_sig = signal_pending(current);
if (got_sig)
break;
we are waiting unlock first and later lock again. */
mutex_unlock(&itv->serialize_lock);
prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE);
- if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0)
+ if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) &&
+ !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags))
schedule();
finish_wait(&itv->event_waitq, &wait);
mutex_lock(&itv->serialize_lock);
bytes_needed, s->name);
return -1;
}
- if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) {
+ if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) {
IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name);
IVTV_WARN("Cause: the application is not reading fast enough.\n");
}
return -ENOMEM;
}
if (ivtv_might_use_dma(s)) {
- s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma);
+ s->sg_handle = pci_map_single(itv->pdev, s->sg_dma,
+ sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE);
ivtv_stream_sync_for_cpu(s);
}
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
- while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
- while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
.owner = THIS_MODULE,
.add = mx3_camera_add_device,
.remove = mx3_camera_remove_device,
-#ifdef CONFIG_PM
- .suspend = mx3_camera_suspend,
- .resume = mx3_camera_resume,
-#endif
.set_crop = mx3_camera_set_crop,
.set_fmt = mx3_camera_set_fmt,
.try_fmt = mx3_camera_try_fmt,
return ret;
}
- usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
/****************************************************************************/
+static int _send_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, int index, void *buf, int buflen, int timeout)
+{
+ int rc;
+ void *kbuf = NULL;
+
+ if (buflen) {
+ kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+ if (kbuf == NULL)
+ return -ENOMEM;
+ memcpy(kbuf, buf, buflen);
+ }
-#define SendControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, 500)
+ rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+ request,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ kbuf, buflen, timeout);
-#define RecvControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, 500)
+ kfree(kbuf);
+ return rc;
+}
+static int recv_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, void *buf, int buflen)
+{
+ int rc;
+ void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+
+ if (kbuf == NULL)
+ return -ENOMEM;
+
+ rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+ request,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ pdev->vcinterface,
+ kbuf, buflen, 500);
+ memcpy(buf, kbuf, buflen);
+ kfree(kbuf);
+ return rc;
+}
-static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
+static inline int send_video_command(struct pwc_device *pdev,
+ int index, void *buf, int buflen)
{
- return usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
+ return _send_control_msg(pdev,
SET_EP_STREAM_CTL,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
VIDEO_OUTPUT_CONTROL_FORMATTER,
index,
buf, buflen, 1000);
}
+static inline int send_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, void *buf, int buflen)
+{
+ return _send_control_msg(pdev,
+ request, value, pdev->vcinterface, buf, buflen, 500);
+}
+
static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
return -EINVAL;
memcpy(buf, pEntry->mode, 3);
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
+ ret = send_video_command(pdev, pdev->vendpoint, buf, 3);
if (ret < 0) {
PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
return ret;
memcpy(buf, pChoose->mode, 13);
if (snapshot)
buf[0] |= 0x80;
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
+ ret = send_video_command(pdev, pdev->vendpoint, buf, 13);
if (ret < 0)
return ret;
buf[0] |= 0x80;
/* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
- ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
+ ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12);
if (ret < 0)
return ret;
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 9) & 0x7f;
- return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
}
/* CONTRAST */
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3f;
- return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
}
/* GAMMA */
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 11) & 0x1f;
- return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
}
saturation_register = SATURATION_MODE_FORMATTER2;
else
saturation_register = SATURATION_MODE_FORMATTER1;
- ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = (signed)buf;
saturation_register = SATURATION_MODE_FORMATTER2;
else
saturation_register = SATURATION_MODE_FORMATTER1;
- return SendControlMsg(SET_CHROM_CTL, saturation_register, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
}
/* AGC */
else
buf = 0xff; /* fixed */
- ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
if (!mode && ret >= 0) {
if (value < 0)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3F;
- ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
}
if (ret < 0)
return ret;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf != 0) { /* fixed */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf > 0x3F)
*value = (buf << 10);
}
else { /* auto */
- ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
/* Gah... this value ranges from 0x00 ... 0x9F */
else
buf[0] = 0xff; /* fixed */
- ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
if (!mode && ret >= 0) {
if (value < 0)
buf[0] = value >> 8;
}
- ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
+ &buf, sizeof(buf));
}
return ret;
}
unsigned char buf[2];
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf[0] + (buf[1] << 8);
buf = 0x00; /* active */
else
buf = 0xFF; /* power save */
- return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_restore_user(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
}
int pwc_save_user(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
}
int pwc_restore_factory(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
}
/* ************************************************* */
buf = mode & 0x07; /* just the lowest three bits */
- ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
value = 0xffff;
/* only the msb is considered */
buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_red_gain(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
value = 0xffff;
/* only the msb is considered */
buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
/* useful range is 0x01..0x20 */
buf = speed / 0x7f0;
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf * 0x7f0;
/* useful range is 0x01..0x3F */
buf = (delay >> 10);
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 10;
buf[0] = on_value;
buf[1] = off_value;
- return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
return 0;
}
- ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*on_value = buf[0] * 100;
buf = 0xff; /* auto contour on */
else
buf = 0x0; /* auto contour off */
- ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
contour = 0xffff;
buf = (contour >> 10); /* contour preset is [0..3f] */
- ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return 0;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf == 0) {
/* auto mode off, query current preset value */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*contour = buf << 10;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*backlight = !!buf;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
}
int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*colour = !!buf;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
}
int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*flicker = !!buf;
if (noise > 3)
noise = 3;
buf = noise;
- return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*noise = buf;
unsigned char buf;
buf = flags & 0x03; // only lower two bits are currently used
- return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf));
}
int pwc_mpt_reset(struct pwc_device *pdev, int flags)
buf[1] = (pan >> 8) & 0xFF;
buf[2] = tilt & 0xFF;
buf[3] = (tilt >> 8) & 0xFF;
- return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
+ return send_control_msg(pdev,
+ SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf));
}
int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
int ret;
unsigned char buf[5];
- ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
+ ret = recv_control_msg(pdev,
+ GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
status->status = buf[0] & 0x7; // 3 bits are used for reporting
else
request = SENSOR_TYPE_FORMATTER2;
- ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, request, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (pdev->type < 675)
buffer[1] = (u32) chn_rev;
buffer[2] = CMD_SET_MODE;
memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
+ dev->setmode_ready[chn] = 0;
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
if (debug)
dump_verify_mode(dev, mode);
/* wait at least 3 frames before continuing */
if (mode->restart) {
- dev->setmode_ready[chn] = 0;
wait_event_timeout(dev->wait_setmode[chn],
(dev->setmode_ready[chn] != 0),
msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
/* Now create a video4linux device */
t->vdev = video_device_alloc();
if (t->vdev == NULL) {
+ kfree(t);
kfree(client);
return -ENOMEM;
}
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
static int __uvc_resume(struct usb_interface *intf, int reset)
{
struct uvc_device *dev = usb_get_intfdata(intf);
- int ret;
uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
- if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0)
- return ret;
+ if (reset) {
+ int ret = uvc_ctrl_resume_device(dev);
+
+ if (ret < 0)
+ return ret;
+ }
return uvc_status_resume(dev);
}
/* Buffers are already allocated, bail out. */
if (video->urb_size)
- return 0;
+ return video->urb_size / psize;
/* Compute the number of packets. Bulk endpoints might transfer UVC
* payloads accross multiple URBs.
printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
} while (0)
+/* Zero out the end of the struct pointed to by p. Everthing after, but
+ * not including, the specified field is cleared. */
+#define CLEAR_AFTER_FIELD(p, field) \
+ memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
+ 0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field))
+
struct std_descr {
v4l2_std_id std;
const char *descr;
switch (type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- if (ops->vidioc_try_fmt_vid_cap)
+ if (ops->vidioc_g_fmt_vid_cap)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
- if (ops->vidioc_try_fmt_vid_overlay)
+ if (ops->vidioc_g_fmt_vid_overlay)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- if (ops->vidioc_try_fmt_vid_out)
+ if (ops->vidioc_g_fmt_vid_out)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
- if (ops->vidioc_try_fmt_vid_out_overlay)
+ if (ops->vidioc_g_fmt_vid_out_overlay)
return 0;
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
- if (ops->vidioc_try_fmt_vbi_cap)
+ if (ops->vidioc_g_fmt_vbi_cap)
return 0;
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
- if (ops->vidioc_try_fmt_vbi_out)
+ if (ops->vidioc_g_fmt_vbi_out)
return 0;
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- if (ops->vidioc_try_fmt_sliced_vbi_cap)
+ if (ops->vidioc_g_fmt_sliced_vbi_cap)
return 0;
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
- if (ops->vidioc_try_fmt_sliced_vbi_out)
+ if (ops->vidioc_g_fmt_sliced_vbi_out)
return 0;
break;
case V4L2_BUF_TYPE_PRIVATE:
- if (ops->vidioc_try_fmt_type_private)
+ if (ops->vidioc_g_fmt_type_private)
return 0;
break;
}
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
if (ops->vidioc_s_fmt_vid_cap)
ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_s_fmt_vid_overlay)
ret = ops->vidioc_s_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
if (ops->vidioc_s_fmt_vid_out)
ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_s_fmt_vid_out_overlay)
ret = ops->vidioc_s_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_s_fmt_vbi_cap)
ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_s_fmt_vbi_out)
ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_s_fmt_sliced_vbi_cap)
ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_s_fmt_sliced_vbi_out)
ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
+ /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
if (ops->vidioc_s_fmt_type_private)
ret = ops->vidioc_s_fmt_type_private(file,
fh, f);
v4l2_type_names));
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
if (ops->vidioc_try_fmt_vid_cap)
ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_try_fmt_vid_overlay)
ret = ops->vidioc_try_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
if (ops->vidioc_try_fmt_vid_out)
ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_try_fmt_vid_out_overlay)
ret = ops->vidioc_try_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_try_fmt_vbi_cap)
ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_try_fmt_vbi_out)
ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_try_fmt_sliced_vbi_cap)
ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_try_fmt_sliced_vbi_out)
ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
+ /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
if (ops->vidioc_try_fmt_type_private)
ret = ops->vidioc_try_fmt_type_private(file,
fh, f);
if (ret)
break;
+ if (p->type < V4L2_BUF_TYPE_PRIVATE)
+ CLEAR_AFTER_FIELD(p, memory);
+
ret = ops->vidioc_reqbufs(file, fh, p);
dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
p->count,
static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
{
- int num = -1, i;
-
- for (i = 0; i < NUM_FORMATS; i++) {
- if (zoran_formats[i].flags & flag)
- num++;
- if (num == fmt->index)
- break;
+ unsigned int num, i;
+
+ for (num = i = 0; i < NUM_FORMATS; i++) {
+ if (zoran_formats[i].flags & flag && num++ == fmt->index) {
+ strncpy(fmt->description, zoran_formats[i].name,
+ sizeof(fmt->description) - 1);
+ /* fmt struct pre-zeroed, so adding '\0' not neeed */
+ fmt->pixelformat = zoran_formats[i].fourcc;
+ if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
+ fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+ return 0;
+ }
}
- if (fmt->index < 0 /* late, but not too late */ || i == NUM_FORMATS)
- return -EINVAL;
-
- strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1);
- fmt->pixelformat = zoran_formats[i].fourcc;
- if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
- fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
- return 0;
+ return -EINVAL;
}
static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh,
/* Initalize the timer
*/
- init_timer(&pCfg->timer);
+ init_timer_on_stack(&pCfg->timer);
pCfg->timer.data = (unsigned long) ioc;
pCfg->timer.function = mpt_timer_expired;
pCfg->wait_done = 0;
dev_dbg(pcf->dev, "pcf50633_irq\n");
get_device(pcf->dev);
- disable_irq(pcf->irq);
+ disable_irq_nosync(pcf->irq);
schedule_work(&pcf->irq_work);
return IRQ_HANDLED;
/* Cache is CPU endian */
dest[i - reg] = be16_to_cpu(dest[i - reg]);
- /* Satisfy non-volatile bits from cache */
- dest[i - reg] &= wm8350_reg_io_map[i].vol;
- dest[i - reg] |= wm8350->reg_cache[i];
-
/* Mask out non-readable bits */
dest[i - reg] &= wm8350_reg_io_map[i].readable;
}
(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
| src[i - reg];
- /* Don't store volatile bits */
- wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
-
src[i - reg] = cpu_to_be16(src[i - reg]);
}
(i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
value = be16_to_cpu(wm8350->reg_cache[i]);
value &= wm8350_reg_io_map[i].readable;
- value &= ~wm8350_reg_io_map[i].vol;
wm8350->reg_cache[i] = value;
} else
wm8350->reg_cache[i] = reg_map[i];
* We only use page mode writes; the alternative is sloooow. This routine
* writes at most one page.
*/
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf,
unsigned offset, size_t count)
{
struct i2c_client *client;
return -ETIMEDOUT;
}
-static ssize_t at24_write(struct at24_data *at24,
- char *buf, loff_t off, size_t count)
+static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
+ size_t count)
{
ssize_t retval = 0;
return at24_read(at24, buf, offset, count);
}
-static ssize_t at24_macc_write(struct memory_accessor *macc, char *buf,
+static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
off_t offset, size_t count)
{
struct at24_data *at24 = container_of(macc, struct at24_data, macc);
static ssize_t
-at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
+ size_t count)
{
ssize_t status = 0;
unsigned written = 0;
return at25_ee_read(at25, buf, offset, count);
}
-static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf,
+static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
off_t offset, size_t count)
{
struct at25_data *at25 = container_of(mem, struct at25_data, mem);
edev->edev.class = &enclosure_class;
edev->edev.parent = get_device(dev);
edev->cb = cb;
- dev_set_name(&edev->edev, name);
+ dev_set_name(&edev->edev, "%s", name);
err = device_register(&edev->edev);
if (err)
goto err;
ecomp->number = number;
cdev = &ecomp->cdev;
cdev->parent = get_device(&edev->edev);
- if (name)
- dev_set_name(cdev, name);
+ if (name && name[0])
+ dev_set_name(cdev, "%s", name);
else
dev_set_name(cdev, "%u", number);
struct i2c_client *client;
struct mutex lock;
u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
+ u8 power_state_before_suspend;
};
static int gain_range[] = {
#ifdef CONFIG_PM
static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg)
{
+ struct isl29003_data *data = i2c_get_clientdata(client);
+
+ data->power_state_before_suspend = isl29003_get_power_state(client);
return isl29003_set_power_state(client, 0);
}
/* restore registers from cache */
for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
- if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
+ if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
return -EIO;
- return 0;
+ return isl29003_set_power_state(client,
+ data->power_state_before_suspend);
}
#else
void *gru_start_vaddr;
if (!is_uv_system())
- return -ENODEV;
+ return 0;
#if defined CONFIG_IA64
gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
enum xp_retval ret;
int ch_number;
+ /* initialize the connection registration mutex */
+ for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
+ mutex_init(&xpc_registrations[ch_number].mutex);
+
if (is_shub())
ret = xp_init_sn2();
else if (is_uv())
ret = xp_init_uv();
else
- ret = xpUnsupported;
+ ret = 0;
if (ret != xpSuccess)
- return -ENODEV;
-
- /* initialize the connection registration mutex */
- for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
- mutex_init(&xpc_registrations[ch_number].mutex);
+ return ret;
return 0;
}
short max_npartitions; /* value of XPC_MAX_PARTITIONS */
u8 version;
u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */
+ unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
union {
- unsigned long vars_pa; /* phys address of struct xpc_vars */
- unsigned long activate_gru_mq_desc_gpa; /* phys addr of */
- /* activate mq's */
- /* gru mq descriptor */
+ struct {
+ unsigned long vars_pa; /* phys addr */
+ } sn2;
+ struct {
+ unsigned long heartbeat_gpa; /* phys addr */
+ unsigned long activate_gru_mq_desc_gpa; /* phys addr */
+ } uv;
} sn;
- unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
- u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */
+ u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */
u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
+#define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */
/*
* Define the structures by which XPC variables can be exported to other
(XPC_RP_MACH_NASIDS(_rp) + \
xpc_nasid_mask_nlongs))
+
+/*
+ * The following structure describes the partition's heartbeat info which
+ * will be periodically read by other partitions to determine whether this
+ * XPC is still 'alive'.
+ */
+struct xpc_heartbeat_uv {
+ unsigned long value;
+ unsigned long offline; /* if 0, heartbeat should be changing */
+};
+
/*
* Info pertinent to a GRU message queue using a watch list for irq generation.
*/
/*
* The activate_mq is used to send/receive GRU messages that affect XPC's
- * heartbeat, partition active state, and channel state. This is UV only.
+ * partition active state and channel state. This is uv only.
*/
struct xpc_activate_mq_msghdr_uv {
unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */
/* activate_mq defined message types */
#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0
-#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1
-#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2
-#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3
-#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4
-#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 1
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 2
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 3
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 4
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 5
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV 7
-#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10
-#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 8
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 9
struct xpc_activate_mq_msg_uv {
struct xpc_activate_mq_msghdr_uv hdr;
};
-struct xpc_activate_mq_msg_heartbeat_req_uv {
- struct xpc_activate_mq_msghdr_uv hdr;
- u64 heartbeat;
-};
-
struct xpc_activate_mq_msg_activate_req_uv {
struct xpc_activate_mq_msghdr_uv hdr;
unsigned long rp_gpa;
+ unsigned long heartbeat_gpa;
unsigned long activate_gru_mq_desc_gpa;
};
unsigned long notify_gru_mq_desc_gpa;
};
+struct xpc_activate_mq_msg_chctl_opencomplete_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+};
+
/*
* Functions registered by add_timer() or called by kernel_thread() only
* allow for a single 64-bit argument. The following macros can be used to
#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */
-#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */
-#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */
-#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */
-#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */
+#define XPC_C_ROPENCOMPLETE 0x00000002 /* remote open channel complete */
+#define XPC_C_OPENCOMPLETE 0x00000004 /* local open channel complete */
+#define XPC_C_ROPENREPLY 0x00000008 /* remote open channel reply */
+#define XPC_C_OPENREPLY 0x00000010 /* local open channel reply */
+#define XPC_C_ROPENREQUEST 0x00000020 /* remote open channel request */
+#define XPC_C_OPENREQUEST 0x00000040 /* local open channel request */
-#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */
-#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */
+#define XPC_C_SETUP 0x00000080 /* channel's msgqueues are alloc'd */
+#define XPC_C_CONNECTEDCALLOUT 0x00000100 /* connected callout initiated */
#define XPC_C_CONNECTEDCALLOUT_MADE \
- 0x00000080 /* connected callout completed */
-#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */
-#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */
+ 0x00000200 /* connected callout completed */
+#define XPC_C_CONNECTED 0x00000400 /* local channel is connected */
+#define XPC_C_CONNECTING 0x00000800 /* channel is being connected */
-#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */
-#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */
-#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */
-#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */
+#define XPC_C_RCLOSEREPLY 0x00001000 /* remote close channel reply */
+#define XPC_C_CLOSEREPLY 0x00002000 /* local close channel reply */
+#define XPC_C_RCLOSEREQUEST 0x00004000 /* remote close channel request */
+#define XPC_C_CLOSEREQUEST 0x00008000 /* local close channel request */
-#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */
-#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTED 0x00010000 /* channel is disconnected */
+#define XPC_C_DISCONNECTING 0x00020000 /* channel is being disconnected */
#define XPC_C_DISCONNECTINGCALLOUT \
- 0x00010000 /* disconnecting callout initiated */
+ 0x00040000 /* disconnecting callout initiated */
#define XPC_C_DISCONNECTINGCALLOUT_MADE \
- 0x00020000 /* disconnecting callout completed */
-#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */
+ 0x00080000 /* disconnecting callout completed */
+#define XPC_C_WDISCONNECT 0x00100000 /* waiting for channel disconnect */
/*
* The channel control flags (chctl) union consists of a 64-bit variable which
#define XPC_CHCTL_CLOSEREPLY 0x02
#define XPC_CHCTL_OPENREQUEST 0x04
#define XPC_CHCTL_OPENREPLY 0x08
-#define XPC_CHCTL_MSGREQUEST 0x10
+#define XPC_CHCTL_OPENCOMPLETE 0x10
+#define XPC_CHCTL_MSGREQUEST 0x20
#define XPC_OPENCLOSE_CHCTL_FLAGS \
(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
- XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+ XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | \
+ XPC_CHCTL_OPENCOMPLETE)
#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST
static inline int
};
struct xpc_partition_uv {
+ unsigned long heartbeat_gpa; /* phys addr of partition's heartbeat */
+ struct xpc_heartbeat_uv cached_heartbeat; /* cached copy of */
+ /* partition's heartbeat */
unsigned long activate_gru_mq_desc_gpa; /* phys addr of parititon's */
/* activate mq's gru mq */
/* descriptor */
u8 remote_act_state; /* remote partition's act_state */
u8 act_state_req; /* act_state request from remote partition */
enum xp_retval reason; /* reason for deactivate act_state request */
- u64 heartbeat; /* incremented by remote partition */
};
/* struct xpc_partition_uv flags */
-#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001
+#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000001
#define XPC_P_ENGAGED_UV 0x00000002
-#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000004
/* struct xpc_partition_uv act_state change requests */
} ____cacheline_aligned;
+struct xpc_arch_operations {
+ int (*setup_partitions) (void);
+ void (*teardown_partitions) (void);
+ void (*process_activate_IRQ_rcvd) (void);
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *);
+ int (*setup_rsvd_page) (struct xpc_rsvd_page *);
+
+ void (*allow_hb) (short);
+ void (*disallow_hb) (short);
+ void (*disallow_all_hbs) (void);
+ void (*increment_heartbeat) (void);
+ void (*offline_heartbeat) (void);
+ void (*online_heartbeat) (void);
+ void (*heartbeat_init) (void);
+ void (*heartbeat_exit) (void);
+ enum xp_retval (*get_remote_heartbeat) (struct xpc_partition *);
+
+ void (*request_partition_activation) (struct xpc_rsvd_page *,
+ unsigned long, int);
+ void (*request_partition_reactivation) (struct xpc_partition *);
+ void (*request_partition_deactivation) (struct xpc_partition *);
+ void (*cancel_partition_deactivation_request) (struct xpc_partition *);
+ enum xp_retval (*setup_ch_structures) (struct xpc_partition *);
+ void (*teardown_ch_structures) (struct xpc_partition *);
+
+ enum xp_retval (*make_first_contact) (struct xpc_partition *);
+
+ u64 (*get_chctl_all_flags) (struct xpc_partition *);
+ void (*send_chctl_closerequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_closereply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openrequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_opencomplete) (struct xpc_channel *, unsigned long *);
+ void (*process_msg_chctl_flags) (struct xpc_partition *, int);
+
+ enum xp_retval (*save_remote_msgqueue_pa) (struct xpc_channel *,
+ unsigned long);
+
+ enum xp_retval (*setup_msg_structures) (struct xpc_channel *);
+ void (*teardown_msg_structures) (struct xpc_channel *);
+
+ void (*indicate_partition_engaged) (struct xpc_partition *);
+ void (*indicate_partition_disengaged) (struct xpc_partition *);
+ void (*assume_partition_disengaged) (short);
+ int (*partition_engaged) (short);
+ int (*any_partition_engaged) (void);
+
+ int (*n_of_deliverable_payloads) (struct xpc_channel *);
+ enum xp_retval (*send_payload) (struct xpc_channel *, u32, void *,
+ u16, u8, xpc_notify_func, void *);
+ void *(*get_deliverable_payload) (struct xpc_channel *);
+ void (*received_payload) (struct xpc_channel *, void *);
+ void (*notify_senders_of_disconnect) (struct xpc_channel *);
+};
+
/* struct xpc_partition act_state values (for XPC HB) */
#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */
/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
+extern struct xpc_arch_operations xpc_arch_ops;
extern int xpc_disengage_timelimit;
extern int xpc_disengage_timedout;
extern int xpc_activate_IRQ_rcvd;
extern spinlock_t xpc_activate_IRQ_rcvd_lock;
extern wait_queue_head_t xpc_activate_IRQ_wq;
-extern void *xpc_heartbeating_to_mask;
extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int, int);
extern void xpc_disconnect_wait(int);
-extern int (*xpc_setup_partitions_sn) (void);
-extern void (*xpc_teardown_partitions_sn) (void);
-extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
- unsigned long *,
- size_t *);
-extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
-extern void (*xpc_heartbeat_init) (void);
-extern void (*xpc_heartbeat_exit) (void);
-extern void (*xpc_increment_heartbeat) (void);
-extern void (*xpc_offline_heartbeat) (void);
-extern void (*xpc_online_heartbeat) (void);
-extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
-extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
-extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
-extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
-extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
-extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
-extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
-extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
-extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
-extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
- unsigned long, int);
-extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
-extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
-extern void (*xpc_cancel_partition_deactivation_request) (
- struct xpc_partition *);
-extern void (*xpc_process_activate_IRQ_rcvd) (void);
-extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
-extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
-
-extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
-extern int (*xpc_partition_engaged) (short);
-extern int (*xpc_any_partition_engaged) (void);
-extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
-extern void (*xpc_assume_partition_disengaged) (short);
-
-extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
-
-extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
- unsigned long);
-
-extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
- u16, u8, xpc_notify_func, void *);
-extern void (*xpc_received_payload) (struct xpc_channel *, void *);
/* found in xpc_sn2.c */
extern int xpc_init_sn2(void);
extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-static inline int
-xpc_hb_allowed(short partid, void *heartbeating_to_mask)
-{
- return test_bit(partid, heartbeating_to_mask);
-}
-
-static inline int
-xpc_any_hbs_allowed(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
-static inline void
-xpc_allow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- set_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- clear_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_all_hbs(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
static inline void
xpc_wakeup_channel_mgr(struct xpc_partition *part)
{
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
if (!(ch->flags & XPC_C_SETUP)) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- ret = xpc_setup_msg_structures(ch);
+ ret = xpc_arch_ops.setup_msg_structures(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
+ else
+ ch->flags |= XPC_C_SETUP;
- ch->flags |= XPC_C_SETUP;
-
- if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
+ if (ch->flags & XPC_C_DISCONNECTING)
return;
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
ch->flags |= XPC_C_OPENREPLY;
- xpc_send_chctl_openreply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_openreply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_ROPENREPLY))
return;
- ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
+ if (!(ch->flags & XPC_C_OPENCOMPLETE)) {
+ ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED);
+ xpc_arch_ops.send_chctl_opencomplete(ch, irq_flags);
+ }
+
+ if (!(ch->flags & XPC_C_ROPENCOMPLETE))
+ return;
dev_info(xpc_chan, "channel %d to partition %d connected\n",
ch->number, ch->partid);
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_create_kthreads(ch, 1, 0);
- spin_lock_irqsave(&ch->lock, *irq_flags);
+ ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
}
/*
if (part->act_state == XPC_P_AS_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
- if (xpc_partition_engaged(ch->partid))
+ if (xpc_arch_ops.partition_engaged(ch->partid))
return;
} else {
if (!(ch->flags & XPC_C_CLOSEREPLY)) {
ch->flags |= XPC_C_CLOSEREPLY;
- xpc_send_chctl_closereply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closereply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_RCLOSEREPLY))
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
/* we do callout while holding ch->lock, callout can't block */
- xpc_notify_senders_of_disconnect(ch);
+ xpc_arch_ops.notify_senders_of_disconnect(ch);
}
/* both sides are disconnected now */
DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
/* it's now safe to free the channel's message queues */
- xpc_teardown_msg_structures(ch);
+ xpc_arch_ops.teardown_msg_structures(ch);
ch->func = NULL;
ch->key = NULL;
/*
* Mark the channel disconnected and clear all other flags, including
- * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
- * not including XPC_C_WDISCONNECT (if it was set).
+ * XPC_C_SETUP (because of call to
+ * xpc_arch_ops.teardown_msg_structures()) but not including
+ * XPC_C_WDISCONNECT (if it was set).
*/
ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
struct xpc_channel *ch = &part->channels[ch_number];
enum xp_retval reason;
enum xp_retval ret;
+ int create_kthread = 0;
spin_lock_irqsave(&ch->lock, irq_flags);
* has had a chance to see that the channel is disconnected.
*/
ch->delayed_chctl_flags |= chctl_flags;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
XPC_CHCTL_CLOSEREQUEST;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
XPC_SET_REASON(ch, 0, 0);
ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
}
- chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
+ chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY |
+ XPC_CHCTL_OPENCOMPLETE);
/*
* The meaningful CLOSEREQUEST connection state fields are:
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
xpc_process_disconnect(ch, &irq_flags);
if (ch->flags & XPC_C_DISCONNECTED) {
DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
XPC_CHCTL_CLOSEREPLY;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_RCLOSEREPLY;
if (part->act_state == XPC_P_AS_DEACTIVATING ||
(ch->flags & XPC_C_ROPENREQUEST)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED |
XPC_C_OPENREQUEST)));
*/
if (args->entry_size == 0 || args->local_nentries == 0) {
/* assume OPENREQUEST was delayed by mistake */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
if (args->entry_size != ch->entry_size) {
XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
} else {
ch->entry_size = args->entry_size;
args->local_msgqueue_pa, args->local_nentries,
args->remote_nentries, ch->partid, ch->number);
- if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
if (!(ch->flags & XPC_C_OPENREQUEST)) {
XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
DBUG_ON(args->local_nentries == 0);
DBUG_ON(args->remote_nentries == 0);
- ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
+ ret = xpc_arch_ops.save_remote_msgqueue_pa(ch,
+ args->local_msgqueue_pa);
if (ret != xpSuccess) {
XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_ROPENREPLY;
xpc_process_connect(ch, &irq_flags);
}
+ if (chctl_flags & XPC_CHCTL_OPENCOMPLETE) {
+
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENCOMPLETE received from "
+ "partid=%d, channel=%d\n", ch->partid, ch->number);
+
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
+ if (!(ch->flags & XPC_C_OPENREQUEST) ||
+ !(ch->flags & XPC_C_OPENREPLY)) {
+ XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
+ &irq_flags);
+ goto out;
+ }
+
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREPLY));
+ DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
+
+ ch->flags |= XPC_C_ROPENCOMPLETE;
+
+ xpc_process_connect(ch, &irq_flags);
+ create_kthread = 1;
+ }
+
+out:
spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (create_kthread)
+ xpc_create_kthreads(ch, 1, 0);
}
/*
/* initiate the connection */
ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
- xpc_send_chctl_openrequest(ch, &irq_flags);
+ xpc_arch_ops.send_chctl_openrequest(ch, &irq_flags);
xpc_process_connect(ch, &irq_flags);
int ch_number;
u32 ch_flags;
- chctl.all_flags = xpc_get_chctl_all_flags(part);
+ chctl.all_flags = xpc_arch_ops.get_chctl_all_flags(part);
/*
* Initiate channel connections for registered channels.
if (!(ch_flags & XPC_C_OPENREQUEST)) {
DBUG_ON(ch_flags & XPC_C_SETUP);
(void)xpc_connect_channel(ch);
- } else {
- spin_lock_irqsave(&ch->lock, irq_flags);
- xpc_process_connect(ch, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
}
continue;
}
*/
if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
- xpc_process_msg_chctl_flags(part, ch_number);
+ xpc_arch_ops.process_msg_chctl_flags(part, ch_number);
}
}
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- xpc_send_chctl_closerequest(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closerequest(ch, irq_flags);
if (channel_was_connected)
ch->flags |= XPC_C_WASCONNECTED;
DBUG_ON(payload == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, 0, NULL, NULL);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, 0, NULL, NULL);
xpc_part_deref(part);
}
DBUG_ON(func == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, XPC_N_CALL, func,
- key);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, XPC_N_CALL, func, key);
xpc_part_deref(part);
}
return ret;
{
void *payload;
- payload = xpc_get_deliverable_payload(ch);
+ payload = xpc_arch_ops.get_deliverable_payload(ch);
if (payload != NULL) {
/*
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
ch = &part->channels[ch_number];
- xpc_received_payload(ch, payload);
+ xpc_arch_ops.received_payload(ch, payload);
/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */
xpc_msgqueue_deref(ch);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
static unsigned long xpc_hb_check_timeout;
static struct timer_list xpc_hb_timer;
-void *xpc_heartbeating_to_mask;
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_COMPLETION(xpc_hb_checker_exited);
.notifier_call = xpc_system_die,
};
-int (*xpc_setup_partitions_sn) (void);
-void (*xpc_teardown_partitions_sn) (void);
-enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
- unsigned long *rp_pa,
- size_t *len);
-int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
-void (*xpc_heartbeat_init) (void);
-void (*xpc_heartbeat_exit) (void);
-void (*xpc_increment_heartbeat) (void);
-void (*xpc_offline_heartbeat) (void);
-void (*xpc_online_heartbeat) (void);
-enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
-
-enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
-void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
-u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
-enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
-void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
-void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
-int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
-void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
-
-void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
- unsigned long remote_rp_pa,
- int nasid);
-void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
-void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
-void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
-
-void (*xpc_process_activate_IRQ_rcvd) (void);
-enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
-void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
-
-void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
-int (*xpc_partition_engaged) (short partid);
-int (*xpc_any_partition_engaged) (void);
-void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
-void (*xpc_assume_partition_disengaged) (short partid);
-
-void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-
-enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
- unsigned long msgqueue_pa);
-
-enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
- void *payload, u16 payload_size,
- u8 notify_type, xpc_notify_func func,
- void *key);
-void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+struct xpc_arch_operations xpc_arch_ops;
/*
* Timer function to enforce the timelimit on the partition disengage.
(void)xpc_partition_disengaged(part);
DBUG_ON(part->disengage_timeout != 0);
- DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
+ DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
}
/*
static void
xpc_hb_beater(unsigned long dummy)
{
- xpc_increment_heartbeat();
+ xpc_arch_ops.increment_heartbeat();
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
wake_up_interruptible(&xpc_activate_IRQ_wq);
static void
xpc_start_hb_beater(void)
{
- xpc_heartbeat_init();
+ xpc_arch_ops.heartbeat_init();
init_timer(&xpc_hb_timer);
xpc_hb_timer.function = xpc_hb_beater;
xpc_hb_beater(0);
xpc_stop_hb_beater(void)
{
del_timer_sync(&xpc_hb_timer);
- xpc_heartbeat_exit();
+ xpc_arch_ops.heartbeat_exit();
}
/*
continue;
}
- ret = xpc_get_remote_heartbeat(part);
+ ret = xpc_arch_ops.get_remote_heartbeat(part);
if (ret != xpSuccess)
XPC_DEACTIVATE_PARTITION(part, ret);
}
force_IRQ = 0;
dev_dbg(xpc_part, "processing activate IRQs "
"received\n");
- xpc_process_activate_IRQ_rcvd();
+ xpc_arch_ops.process_activate_IRQ_rcvd();
}
/* wait for IRQ or timeout */
init_waitqueue_head(&ch->idle_wq);
}
- ret = xpc_setup_ch_structures_sn(part);
+ ret = xpc_arch_ops.setup_ch_structures(part);
if (ret != xpSuccess)
goto out_2;
/* now we can begin tearing down the infrastructure */
- xpc_teardown_ch_structures_sn(part);
+ xpc_arch_ops.teardown_ch_structures(part);
kfree(part->remote_openclose_args_base);
part->remote_openclose_args = NULL;
dev_dbg(xpc_part, "activating partition %d\n", partid);
- xpc_allow_hb(partid);
+ xpc_arch_ops.allow_hb(partid);
if (xpc_setup_ch_structures(part) == xpSuccess) {
(void)xpc_part_ref(part); /* this will always succeed */
- if (xpc_make_first_contact(part) == xpSuccess) {
+ if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
xpc_mark_partition_active(part);
xpc_channel_mgr(part);
/* won't return until partition is deactivating */
xpc_teardown_ch_structures(part);
}
- xpc_disallow_hb(partid);
+ xpc_arch_ops.disallow_hb(partid);
xpc_mark_partition_inactive(part);
if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return 0;
static void
xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
{
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
+
do {
/* deliver messages to their intended recipients */
- while (xpc_n_of_deliverable_payloads(ch) > 0 &&
+ while (n_of_deliverable_payloads(ch) > 0 &&
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_deliver_payload(ch);
}
"wait_event_interruptible_exclusive()\n");
(void)wait_event_interruptible_exclusive(ch->idle_wq,
- (xpc_n_of_deliverable_payloads(ch) > 0 ||
+ (n_of_deliverable_payloads(ch) > 0 ||
(ch->flags & XPC_C_DISCONNECTING)));
atomic_dec(&ch->kthreads_idle);
struct xpc_channel *ch;
int n_needed;
unsigned long irq_flags;
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
partid, ch_number);
* additional kthreads to help deliver them. We only
* need one less than total #of messages to deliver.
*/
- n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
+ n_needed = n_of_deliverable_payloads(ch) - 1;
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
xpc_activate_kthreads(ch, n_needed);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
struct xpc_partition *part = &xpc_partitions[ch->partid];
struct task_struct *kthread;
+ void (*indicate_partition_disengaged) (struct xpc_partition *) =
+ xpc_arch_ops.indicate_partition_disengaged;
while (needed-- > 0) {
} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
atomic_inc_return(&part->nchannels_engaged) == 1) {
- xpc_indicate_partition_engaged(part);
+ xpc_arch_ops.indicate_partition_engaged(part);
}
(void)xpc_part_ref(part);
xpc_msgqueue_ref(ch);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
atomic_set(&part->references, 0);
}
- return xpc_setup_partitions_sn();
+ return xpc_arch_ops.setup_partitions();
}
static void
xpc_teardown_partitions(void)
{
- xpc_teardown_partitions_sn();
+ xpc_arch_ops.teardown_partitions();
kfree(xpc_partitions);
}
disengage_timeout = part->disengage_timeout;
}
- if (xpc_any_partition_engaged()) {
+ if (xpc_arch_ops.any_partition_engaged()) {
if (time_is_before_jiffies(printmsg_time)) {
dev_info(xpc_part, "waiting for remote "
"partitions to deactivate, timeout in "
} while (1);
- DBUG_ON(xpc_any_partition_engaged());
- DBUG_ON(xpc_any_hbs_allowed() != 0);
+ DBUG_ON(xpc_arch_ops.any_partition_engaged());
xpc_teardown_rsvd_page();
/* keep xpc_hb_checker thread from doing anything (just in case) */
xpc_exiting = 1;
- xpc_disallow_all_hbs(); /*indicate we're deactivated */
+ xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
- if (xpc_partition_engaged(partid) ||
+ if (xpc_arch_ops.partition_engaged(partid) ||
part->act_state != XPC_P_AS_INACTIVE) {
- xpc_request_partition_deactivation(part);
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.request_partition_deactivation(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
}
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
while (1) {
- any_engaged = xpc_any_partition_engaged();
+ any_engaged = xpc_arch_ops.any_partition_engaged();
if (!any_engaged) {
dev_info(xpc_part, "all partitions have deactivated\n");
break;
if (!keep_waiting--) {
for (partid = 0; partid < xp_max_npartitions;
partid++) {
- if (xpc_partition_engaged(partid)) {
+ if (xpc_arch_ops.partition_engaged(partid)) {
dev_info(xpc_part, "deactivate from "
"remote partition %d timed "
"out\n", partid);
/* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
- xpc_offline_heartbeat();
+ xpc_arch_ops.offline_heartbeat();
break;
case DIE_KDEBUG_LEAVE:
/* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
- xpc_online_heartbeat();
+ xpc_arch_ops.online_heartbeat();
break;
}
#else
size_t buf_len = 0;
void *buf = buf;
void *buf_base = NULL;
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *) =
+ xpc_arch_ops.get_partition_rsvd_page_pa;
while (1) {
* ??? function or have two versions? Rename rp_pa for UV to
* ??? rp_gpa?
*/
- ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
- &len);
+ ret = get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len);
dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
"address=0x%016lx, len=0x%016lx\n", ret,
xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
- ret = xpc_setup_rsvd_page_sn(rp);
+ ret = xpc_arch_ops.setup_rsvd_page(rp);
if (ret != 0)
return ret;
short partid = XPC_PARTID(part);
int disengaged;
- disengaged = !xpc_partition_engaged(partid);
+ disengaged = !xpc_arch_ops.partition_engaged(partid);
if (part->disengage_timeout) {
if (!disengaged) {
if (time_is_after_jiffies(part->disengage_timeout)) {
dev_info(xpc_part, "deactivate request to remote "
"partition %d timed out\n", partid);
xpc_disengage_timedout = 1;
- xpc_assume_partition_disengaged(partid);
+ xpc_arch_ops.assume_partition_disengaged(partid);
disengaged = 1;
}
part->disengage_timeout = 0;
if (part->act_state != XPC_P_AS_INACTIVE)
xpc_wakeup_channel_mgr(part);
- xpc_cancel_partition_deactivation_request(part);
+ xpc_arch_ops.cancel_partition_deactivation_request(part);
}
return disengaged;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
/* ask remote partition to deactivate with regard to us */
- xpc_request_partition_deactivation(part);
+ xpc_arch_ops.request_partition_deactivation(part);
/* set a timelimit on the disengage phase of the deactivation request */
part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
continue;
}
- xpc_request_partition_activation(remote_rp,
+ xpc_arch_ops.request_partition_activation(remote_rp,
remote_rp_pa, nasid);
}
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
static int
-xpc_setup_partitions_sn_sn2(void)
+xpc_setup_partitions_sn2(void)
{
/* nothing needs to be done */
return 0;
}
static void
-xpc_teardown_partitions_sn_sn2(void)
+xpc_teardown_partitions_sn2(void)
{
/* nothing needs to be done */
}
XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
}
+static void
+xpc_send_chctl_opencomplete_sn2(struct xpc_channel *ch,
+ unsigned long *irq_flags)
+{
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENCOMPLETE, irq_flags);
+}
+
static void
xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
{
static int
-xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_sn2(struct xpc_rsvd_page *rp)
{
struct amo *amos_page;
int i;
xpc_vars_sn2 = XPC_RP_VARS(rp);
- rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+ rp->sn.sn2.vars_pa = xp_pa(xpc_vars_sn2);
/* vars_part array follows immediately after vars */
xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
return 0;
}
+static int
+xpc_hb_allowed_sn2(short partid, void *heartbeating_to_mask)
+{
+ return test_bit(partid, heartbeating_to_mask);
+}
+
+static void
+xpc_allow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ set_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ clear_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_all_hbs_sn2(void)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, xp_max_npartitions);
+}
+
static void
xpc_increment_heartbeat_sn2(void)
{
DBUG_ON(xpc_vars_sn2 == NULL);
bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
- xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
xpc_online_heartbeat_sn2();
}
remote_vars->heartbeating_to_mask[0]);
if ((remote_vars->heartbeat == part->last_heartbeat &&
- remote_vars->heartbeat_offline == 0) ||
- !xpc_hb_allowed(sn_partition_id,
- &remote_vars->heartbeating_to_mask)) {
+ !remote_vars->heartbeat_offline) ||
+ !xpc_hb_allowed_sn2(sn_partition_id,
+ remote_vars->heartbeating_to_mask)) {
ret = xpNoHeartbeat;
} else {
part->last_heartbeat = remote_vars->heartbeat;
return;
}
- remote_vars_pa = remote_rp->sn.vars_pa;
+ remote_vars_pa = remote_rp->sn.sn2.vars_pa;
remote_rp_version = remote_rp->version;
remote_rp_ts_jiffies = remote_rp->ts_jiffies;
* Setup the channel structures that are sn2 specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_setup_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
struct xpc_channel_sn2 *ch_sn2;
* Teardown the channel structures that are sn2 specific.
*/
static void
-xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_teardown_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
short partid = XPC_PARTID(part);
xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
}
+static struct xpc_arch_operations xpc_arch_ops_sn2 = {
+ .setup_partitions = xpc_setup_partitions_sn2,
+ .teardown_partitions = xpc_teardown_partitions_sn2,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2,
+ .setup_rsvd_page = xpc_setup_rsvd_page_sn2,
+
+ .allow_hb = xpc_allow_hb_sn2,
+ .disallow_hb = xpc_disallow_hb_sn2,
+ .disallow_all_hbs = xpc_disallow_all_hbs_sn2,
+ .increment_heartbeat = xpc_increment_heartbeat_sn2,
+ .offline_heartbeat = xpc_offline_heartbeat_sn2,
+ .online_heartbeat = xpc_online_heartbeat_sn2,
+ .heartbeat_init = xpc_heartbeat_init_sn2,
+ .heartbeat_exit = xpc_heartbeat_exit_sn2,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_sn2,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_sn2,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_sn2,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_sn2,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_sn2,
+
+ .setup_ch_structures = xpc_setup_ch_structures_sn2,
+ .teardown_ch_structures = xpc_teardown_ch_structures_sn2,
+
+ .make_first_contact = xpc_make_first_contact_sn2,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_sn2,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_sn2,
+ .send_chctl_closereply = xpc_send_chctl_closereply_sn2,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_sn2,
+ .send_chctl_openreply = xpc_send_chctl_openreply_sn2,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2,
+
+ .setup_msg_structures = xpc_setup_msg_structures_sn2,
+ .teardown_msg_structures = xpc_teardown_msg_structures_sn2,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_sn2,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2,
+ .partition_engaged = xpc_partition_engaged_sn2,
+ .any_partition_engaged = xpc_any_partition_engaged_sn2,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_sn2,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2,
+ .send_payload = xpc_send_payload_sn2,
+ .get_deliverable_payload = xpc_get_deliverable_payload_sn2,
+ .received_payload = xpc_received_payload_sn2,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2,
+};
+
int
xpc_init_sn2(void)
{
int ret;
size_t buf_size;
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
- xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
- xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
- xpc_online_heartbeat = xpc_online_heartbeat_sn2;
- xpc_heartbeat_init = xpc_heartbeat_init_sn2;
- xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
-
- xpc_request_partition_activation = xpc_request_partition_activation_sn2;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_sn2;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_sn2;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_sn2;
-
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
- xpc_make_first_contact = xpc_make_first_contact_sn2;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
-
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_sn2;
- xpc_partition_engaged = xpc_partition_engaged_sn2;
- xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
-
- xpc_send_payload = xpc_send_payload_sn2;
- xpc_received_payload = xpc_received_payload_sn2;
+ xpc_arch_ops = xpc_arch_ops_sn2;
if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
};
#endif
-static atomic64_t xpc_heartbeat_uv;
-static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+static struct xpc_heartbeat_uv *xpc_heartbeat_uv;
#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES)
#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
static struct xpc_gru_mq_uv *xpc_notify_mq_uv;
static int
-xpc_setup_partitions_sn_uv(void)
+xpc_setup_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
}
static void
-xpc_teardown_partitions_sn_uv(void)
+xpc_teardown_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
/* syncing of remote_act_state was just done above */
break;
- case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
struct xpc_activate_mq_msg_activate_req_uv *msg;
part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+ part_uv->heartbeat_gpa = msg->heartbeat_gpa;
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
xpc_wakeup_channel_mgr(part);
break;
}
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV: {
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_opencomplete_uv, hdr);
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENCOMPLETE;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ }
case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
part_uv->flags |= XPC_P_ENGAGED_UV;
/*
* !!! Make our side think that the remote partition sent an activate
- * !!! message our way by doing what the activate IRQ handler would
+ * !!! mq message our way by doing what the activate IRQ handler would
* !!! do had one really been sent.
*/
}
static int
-xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_uv(struct xpc_rsvd_page *rp)
{
- rp->sn.activate_gru_mq_desc_gpa =
+ xpc_heartbeat_uv =
+ &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat;
+ rp->sn.uv.heartbeat_gpa = uv_gpa(xpc_heartbeat_uv);
+ rp->sn.uv.activate_gru_mq_desc_gpa =
uv_gpa(xpc_activate_mq_uv->gru_mq_desc);
return 0;
}
static void
-xpc_send_heartbeat_uv(int msg_type)
+xpc_allow_hb_uv(short partid)
{
- short partid;
- struct xpc_partition *part;
- struct xpc_activate_mq_msg_heartbeat_req_uv msg;
-
- /*
- * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
- * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
- * !!! seconds. This is an increase in numalink traffic.
- * ??? Is this good?
- */
-
- msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
-
- partid = find_first_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV);
-
- while (partid < XP_MAX_NPARTITIONS_UV) {
- part = &xpc_partitions[partid];
+}
- xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
- msg_type);
+static void
+xpc_disallow_hb_uv(short partid)
+{
+}
- partid = find_next_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV, partid + 1);
- }
+static void
+xpc_disallow_all_hbs_uv(void)
+{
}
static void
xpc_increment_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+ xpc_heartbeat_uv->value++;
}
static void
xpc_offline_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 1;
}
static void
xpc_online_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_init_uv(void)
{
- atomic64_set(&xpc_heartbeat_uv, 0);
- bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
- xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+ xpc_heartbeat_uv->value = 1;
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_exit_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_offline_heartbeat_uv();
}
static enum xp_retval
xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
{
struct xpc_partition_uv *part_uv = &part->sn.uv;
- enum xp_retval ret = xpNoHeartbeat;
+ enum xp_retval ret;
- if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
- part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+ ret = xp_remote_memcpy(uv_gpa(&part_uv->cached_heartbeat),
+ part_uv->heartbeat_gpa,
+ sizeof(struct xpc_heartbeat_uv));
+ if (ret != xpSuccess)
+ return ret;
- if (part_uv->heartbeat != part->last_heartbeat ||
- (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+ if (part_uv->cached_heartbeat.value == part->last_heartbeat &&
+ !part_uv->cached_heartbeat.offline) {
- part->last_heartbeat = part_uv->heartbeat;
- ret = xpSuccess;
- }
+ ret = xpNoHeartbeat;
+ } else {
+ part->last_heartbeat = part_uv->cached_heartbeat.value;
}
return ret;
}
part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+ part->sn.uv.heartbeat_gpa = remote_rp->sn.uv.heartbeat_gpa;
part->sn.uv.activate_gru_mq_desc_gpa =
- remote_rp->sn.activate_gru_mq_desc_gpa;
+ remote_rp->sn.uv.activate_gru_mq_desc_gpa;
/*
* ??? Is it a good idea to make this conditional on what is
*/
if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+ msg.heartbeat_gpa = xpc_rsvd_page->sn.uv.heartbeat_gpa;
msg.activate_gru_mq_desc_gpa =
- xpc_rsvd_page->sn.activate_gru_mq_desc_gpa;
+ xpc_rsvd_page->sn.uv.activate_gru_mq_desc_gpa;
xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
}
* Setup the channel structures that are uv specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_setup_ch_structures_uv(struct xpc_partition *part)
{
struct xpc_channel_uv *ch_uv;
int ch_number;
* Teardown the channel structures that are uv specific.
*/
static void
-xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_teardown_ch_structures_uv(struct xpc_partition *part)
{
/* nothing needs to be done */
return;
XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
}
+static void
+xpc_send_chctl_opencomplete_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv msg;
+
+ msg.ch_number = ch->number;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV);
+}
+
static void
xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
{
msg->hdr.msg_slot_number += ch->remote_nentries;
}
+static struct xpc_arch_operations xpc_arch_ops_uv = {
+ .setup_partitions = xpc_setup_partitions_uv,
+ .teardown_partitions = xpc_teardown_partitions_uv,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv,
+ .setup_rsvd_page = xpc_setup_rsvd_page_uv,
+
+ .allow_hb = xpc_allow_hb_uv,
+ .disallow_hb = xpc_disallow_hb_uv,
+ .disallow_all_hbs = xpc_disallow_all_hbs_uv,
+ .increment_heartbeat = xpc_increment_heartbeat_uv,
+ .offline_heartbeat = xpc_offline_heartbeat_uv,
+ .online_heartbeat = xpc_online_heartbeat_uv,
+ .heartbeat_init = xpc_heartbeat_init_uv,
+ .heartbeat_exit = xpc_heartbeat_exit_uv,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_uv,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_uv,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_uv,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_uv,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_uv,
+
+ .setup_ch_structures = xpc_setup_ch_structures_uv,
+ .teardown_ch_structures = xpc_teardown_ch_structures_uv,
+
+ .make_first_contact = xpc_make_first_contact_uv,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_uv,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_uv,
+ .send_chctl_closereply = xpc_send_chctl_closereply_uv,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_uv,
+ .send_chctl_openreply = xpc_send_chctl_openreply_uv,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv,
+
+ .setup_msg_structures = xpc_setup_msg_structures_uv,
+ .teardown_msg_structures = xpc_teardown_msg_structures_uv,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_uv,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_uv,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_uv,
+ .partition_engaged = xpc_partition_engaged_uv,
+ .any_partition_engaged = xpc_any_partition_engaged_uv,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv,
+ .send_payload = xpc_send_payload_uv,
+ .get_deliverable_payload = xpc_get_deliverable_payload_uv,
+ .received_payload = xpc_received_payload_uv,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv,
+};
+
int
xpc_init_uv(void)
{
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_uv;
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
- xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
- xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
- xpc_online_heartbeat = xpc_online_heartbeat_uv;
- xpc_heartbeat_init = xpc_heartbeat_init_uv;
- xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
-
- xpc_request_partition_activation = xpc_request_partition_activation_uv;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_uv;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_uv;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_uv;
-
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
-
- xpc_make_first_contact = xpc_make_first_contact_uv;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_uv;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
- xpc_partition_engaged = xpc_partition_engaged_uv;
- xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
-
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
- xpc_send_payload = xpc_send_payload_uv;
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
- xpc_received_payload = xpc_received_payload_uv;
+ xpc_arch_ops = xpc_arch_ops_uv;
if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
brq.data.blocks = req->nr_sectors;
+ /*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
+
/*
* After a read error, we redo the request one sector at a time
* in order to accurately determine which sectors can be read
* This delay should be sufficient to allow the power supply
* to reach the minimum voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
* This delay must be at least 74 clock sizes, or 1 ms, or the
* time required to reach a stable voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
}
static void mmc_power_off(struct mmc_host *host)
}
ext_csd_struct = ext_csd[EXT_CSD_REV];
- if (ext_csd_struct > 2) {
+ if (ext_csd_struct > 3) {
printk(KERN_ERR "%s: unrecognised EXT_CSD structure "
"version %d\n", mmc_hostname(card->host),
ext_csd_struct);
if (err)
goto err;
- /*
- * For SPI, enable CRC as appropriate.
- */
- if (mmc_host_is_spi(host)) {
- err = mmc_spi_set_crc(host, use_spi_crc);
- if (err)
- goto err;
- }
-
/*
* Fetch CID from card.
*/
goto free_card;
}
+ /*
+ * For SPI, enable CRC as appropriate.
+ * This CRC enable is located AFTER the reading of the
+ * card registers because some SDHC cards are not able
+ * to provide valid CRCs for non-512-byte blocks.
+ */
+ if (mmc_host_is_spi(host)) {
+ err = mmc_spi_set_crc(host, use_spi_crc);
+ if (err)
+ goto free_card;
+ }
+
/*
* Attempt to change to high-speed (if supported)
*/
wmb();
- if (host->actual_bus_width == MMC_BUS_WIDTH_4)
- BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */
- else
- BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */
-
- RSSR(host->dma) = DMA_REQ_SDHC;
-
set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events);
clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events);
if (ios->bus_width == MMC_BUS_WIDTH_4) {
host->actual_bus_width = MMC_BUS_WIDTH_4;
imx_gpio_mode(PB11_PF_SD_DAT3);
+ BLR(host->dma) = 0; /* burst 64 byte read/write */
} else {
host->actual_bus_width = MMC_BUS_WIDTH_1;
imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11);
+ BLR(host->dma) = 16; /* burst 16 byte read/write */
}
if (host->power_mode != ios->power_mode) {
mod_timer(&host->timer, jiffies + (HZ>>1));
}
-static int imxmci_probe(struct platform_device *pdev)
+static int __init imxmci_probe(struct platform_device *pdev)
{
struct mmc_host *mmc;
struct imxmci_host *host = NULL;
}
host->dma_allocated = 1;
imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host);
+ RSSR(host->dma) = DMA_REQ_SDHC;
tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host);
host->status_reg=0;
return ret;
}
-static int imxmci_remove(struct platform_device *pdev)
+static int __exit imxmci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
#endif /* CONFIG_PM */
static struct platform_driver imxmci_driver = {
- .probe = imxmci_probe,
- .remove = imxmci_remove,
+ .remove = __exit_p(imxmci_remove),
.suspend = imxmci_suspend,
.resume = imxmci_resume,
.driver = {
static int __init imxmci_init(void)
{
- return platform_driver_register(&imxmci_driver);
+ return platform_driver_probe(&imxmci_driver, imxmci_probe);
}
static void __exit imxmci_exit(void)
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#include <linux/hrtimer.h>
+#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/bio.h>
#include <linux/dma-mapping.h>
* reads which takes nowhere near that long. Older cards may be able to use
* shorter timeouts ... but why bother?
*/
-#define r1b_timeout ktime_set(3, 0)
+#define r1b_timeout (HZ * 3)
/****************************************************************************/
return status;
}
-static int
-mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte)
+static int mmc_spi_skip(struct mmc_spi_host *host, unsigned long timeout,
+ unsigned n, u8 byte)
{
u8 *cp = host->data->status;
-
- timeout = ktime_add(timeout, ktime_get());
+ unsigned long start = jiffies;
while (1) {
int status;
return cp[i];
}
- /* REVISIT investigate msleep() to avoid busy-wait I/O
- * in at least some cases.
- */
- if (ktime_to_ns(ktime_sub(ktime_get(), timeout)) > 0)
+ if (time_is_before_jiffies(start + timeout))
break;
+
+ /* If we need long timeouts, we may release the CPU.
+ * We use jiffies here because we want to have a relation
+ * between elapsed time and the blocking of the scheduler.
+ */
+ if (time_is_before_jiffies(start+1))
+ schedule();
}
return -ETIMEDOUT;
}
static inline int
-mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout)
+mmc_spi_wait_unbusy(struct mmc_spi_host *host, unsigned long timeout)
{
return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0);
}
-static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout)
+static int mmc_spi_readtoken(struct mmc_spi_host *host, unsigned long timeout)
{
return mmc_spi_skip(host, timeout, 1, 0xff);
}
u8 *cp = host->data->status;
u8 *end = cp + host->t.len;
int value = 0;
+ int bitshift;
+ u8 leftover = 0;
+ unsigned short rotator;
+ int i;
char tag[32];
snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
/* Data block reads (R1 response types) may need more data... */
if (cp == end) {
- unsigned i;
-
cp = host->data->status;
+ end = cp+1;
/* Card sends N(CR) (== 1..8) bytes of all-ones then one
* status byte ... and we already scanned 2 bytes.
}
checkstatus:
- if (*cp & 0x80) {
- dev_dbg(&host->spi->dev, "%s: INVALID RESPONSE, %02x\n",
- tag, *cp);
- value = -EBADR;
- goto done;
+ bitshift = 0;
+ if (*cp & 0x80) {
+ /* Houston, we have an ugly card with a bit-shifted response */
+ rotator = *cp++ << 8;
+ /* read the next byte */
+ if (cp == end) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ cp = host->data->status;
+ end = cp+1;
+ }
+ rotator |= *cp++;
+ while (rotator & 0x8000) {
+ bitshift++;
+ rotator <<= 1;
+ }
+ cmd->resp[0] = rotator >> 8;
+ leftover = rotator;
+ } else {
+ cmd->resp[0] = *cp++;
}
-
- cmd->resp[0] = *cp++;
cmd->error = 0;
/* Status byte: the entire seven-bit R1 response. */
if (cmd->resp[0] != 0) {
if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS
- | R1_SPI_ILLEGAL_COMMAND)
+ | R1_SPI_ILLEGAL_COMMAND)
& cmd->resp[0])
value = -EINVAL;
else if (R1_SPI_COM_CRC & cmd->resp[0])
* SPI R5 == R1 + data byte; IO_RW_DIRECT
*/
case MMC_RSP_SPI_R2:
- cmd->resp[0] |= *cp << 8;
+ /* read the next byte */
+ if (cp == end) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ cp = host->data->status;
+ end = cp+1;
+ }
+ if (bitshift) {
+ rotator = leftover << 8;
+ rotator |= *cp << bitshift;
+ cmd->resp[0] |= (rotator & 0xFF00);
+ } else {
+ cmd->resp[0] |= *cp << 8;
+ }
break;
/* SPI R3, R4, or R7 == R1 + 4 bytes */
case MMC_RSP_SPI_R3:
- cmd->resp[1] = get_unaligned_be32(cp);
+ rotator = leftover << 8;
+ cmd->resp[1] = 0;
+ for (i = 0; i < 4; i++) {
+ cmd->resp[1] <<= 8;
+ /* read the next byte */
+ if (cp == end) {
+ value = mmc_spi_readbytes(host, 1);
+ if (value < 0)
+ goto done;
+ cp = host->data->status;
+ end = cp+1;
+ }
+ if (bitshift) {
+ rotator |= *cp++ << bitshift;
+ cmd->resp[1] |= (rotator >> 8);
+ rotator <<= 8;
+ } else {
+ cmd->resp[1] |= *cp++;
+ }
+ }
break;
/* SPI R1 == just one status byte */
*/
static int
mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t,
- ktime_t timeout)
+ unsigned long timeout)
{
struct spi_device *spi = host->spi;
int status, i;
*/
static int
mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
- ktime_t timeout)
+ unsigned long timeout)
{
struct spi_device *spi = host->spi;
int status;
struct scratch *scratch = host->data;
+ unsigned int bitshift;
+ u8 leftover;
/* At least one SD card sends an all-zeroes byte when N(CX)
* applies, before the all-ones bytes ... just cope with that.
if (status == 0xff || status == 0)
status = mmc_spi_readtoken(host, timeout);
- if (status == SPI_TOKEN_SINGLE) {
- if (host->dma_dev) {
- dma_sync_single_for_device(host->dma_dev,
- host->data_dma, sizeof(*scratch),
- DMA_BIDIRECTIONAL);
- dma_sync_single_for_device(host->dma_dev,
- t->rx_dma, t->len,
- DMA_FROM_DEVICE);
- }
+ if (status < 0) {
+ dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);
+ return status;
+ }
- status = spi_sync(spi, &host->m);
+ /* The token may be bit-shifted...
+ * the first 0-bit precedes the data stream.
+ */
+ bitshift = 7;
+ while (status & 0x80) {
+ status <<= 1;
+ bitshift--;
+ }
+ leftover = status << 1;
- if (host->dma_dev) {
- dma_sync_single_for_cpu(host->dma_dev,
- host->data_dma, sizeof(*scratch),
- DMA_BIDIRECTIONAL);
- dma_sync_single_for_cpu(host->dma_dev,
- t->rx_dma, t->len,
- DMA_FROM_DEVICE);
- }
+ if (host->dma_dev) {
+ dma_sync_single_for_device(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+ dma_sync_single_for_device(host->dma_dev,
+ t->rx_dma, t->len,
+ DMA_FROM_DEVICE);
+ }
- } else {
- dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status);
+ status = spi_sync(spi, &host->m);
- /* we've read extra garbage, timed out, etc */
- if (status < 0)
- return status;
+ if (host->dma_dev) {
+ dma_sync_single_for_cpu(host->dma_dev,
+ host->data_dma, sizeof(*scratch),
+ DMA_BIDIRECTIONAL);
+ dma_sync_single_for_cpu(host->dma_dev,
+ t->rx_dma, t->len,
+ DMA_FROM_DEVICE);
+ }
- /* low four bits are an R2 subset, fifth seems to be
- * vendor specific ... map them all to generic error..
+ if (bitshift) {
+ /* Walk through the data and the crc and do
+ * all the magic to get byte-aligned data.
*/
- return -EIO;
+ u8 *cp = t->rx_buf;
+ unsigned int len;
+ unsigned int bitright = 8 - bitshift;
+ u8 temp;
+ for (len = t->len; len; len--) {
+ temp = *cp;
+ *cp++ = leftover | (temp >> bitshift);
+ leftover = temp << bitright;
+ }
+ cp = (u8 *) &scratch->crc_val;
+ temp = *cp;
+ *cp++ = leftover | (temp >> bitshift);
+ leftover = temp << bitright;
+ temp = *cp;
+ *cp = leftover | (temp >> bitshift);
}
if (host->mmc->use_spi_crc) {
unsigned n_sg;
int multiple = (data->blocks > 1);
u32 clock_rate;
- ktime_t timeout;
+ unsigned long timeout;
if (data->flags & MMC_DATA_READ)
direction = DMA_FROM_DEVICE;
else
clock_rate = spi->max_speed_hz;
- timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns +
- data->timeout_clks * 1000000 / clock_rate);
+ timeout = data->timeout_ns +
+ data->timeout_clks * 1000000 / clock_rate;
+ timeout = usecs_to_jiffies((unsigned int)(timeout / 1000)) + 1;
/* Handle scatterlist segments one at a time, with synch for
* each 512-byte block
mod_timer(&host->timer, jiffies + HZ);
}
-static int __devinit mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
struct mmc_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
}
host = mmc_priv(mmc);
+ host->mmc = mmc;
/* Bits 12 thru 19 is the designer */
host->hw_designer = (dev->periphid >> 12) & 0xff;
/* Bits 20 thru 23 is the revison */
host->mclk = clk_get_rate(host->clk);
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
}
- host->mmc = mmc;
host->base = ioremap(dev->res.start, SZ_4K);
if (!host->base) {
ret = -ENOMEM;
unsigned int tmout;
int tmout_index;
+ /*
+ * Hardware weirdness. The FIFO_EMPTY bit of the HW_STATE
+ * register is sometimes not set before a while when some
+ * "unusual" data block sizes are used (such as with the SWITCH
+ * command), even despite the fact that the XFER_DONE interrupt
+ * was raised. And if another data transfer starts before
+ * this bit comes to good sense (which eventually happens by
+ * itself) then the new transfer simply fails with a timeout.
+ */
+ if (!(mvsd_read(MVSD_HW_STATE) & (1 << 13))) {
+ unsigned long t = jiffies + HZ;
+ unsigned int hw_state, count = 0;
+ do {
+ if (time_after(jiffies, t)) {
+ dev_warn(host->dev, "FIFO_EMPTY bit missing\n");
+ break;
+ }
+ hw_state = mvsd_read(MVSD_HW_STATE);
+ count++;
+ } while (!(hw_state & (1 << 13)));
+ dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
+ "(hw=0x%04x, count=%d, jiffies=%ld)\n",
+ hw_state, count, jiffies - (t - HZ));
+ }
+
/* If timeout=0 then maximum timeout index is used. */
tmout = DIV_ROUND_UP(data->timeout_ns, host->ns_per_clk);
tmout += data->timeout_clks;
if (ios->bus_width == MMC_BUS_WIDTH_4)
ctrl_reg |= MVSD_HOST_CTRL_DATA_WIDTH_4_BITS;
+ /*
+ * The HI_SPEED_EN bit is causing trouble with many (but not all)
+ * high speed SD, SDHC and SDIO cards. Not enabling that bit
+ * makes all cards work. So let's just ignore that bit for now
+ * and revisit this issue if problems for not enabling this bit
+ * are ever reported.
+ */
+#if 0
if (ios->timing == MMC_TIMING_MMC_HS ||
ios->timing == MMC_TIMING_SD_HS)
ctrl_reg |= MVSD_HOST_CTRL_HI_SPEED_EN;
+#endif
host->ctrl = ctrl_reg;
mvsd_write(MVSD_HOST_CTRL, ctrl_reg);
}
#ifdef CONFIG_PM
-static int mvsd_suspend(struct platform_device *dev, pm_message_t state,
- u32 level)
+static int mvsd_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
+ if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
-static int mvsd_resume(struct platform_device *dev, u32 level)
+static int mvsd_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = platform_dev_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == RESUME_ENABLE)
+ if (mmc)
ret = mmc_resume_host(mmc);
return ret;
MODULE_AUTHOR("Maen Suleiman, Nicolas Pitre");
MODULE_DESCRIPTION("Marvell MMC,SD,SDIO Host Controller driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mvsdio");
struct work_struct datawork;
};
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
+
static inline int mxcmci_use_dma(struct mxcmci_host *host)
{
return host->do_dma;
writew(0xff, host->base + MMC_REG_RES_TO);
}
-static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
{
unsigned int nob = data->blocks;
unsigned int blksz = data->blksz;
#ifdef HAS_DMA
struct scatterlist *sg;
int i;
+ int ret;
#endif
if (data->flags & MMC_DATA_STREAM)
nob = 0xffff;
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 3 || sg->length & 3) {
host->do_dma = 0;
- return;
+ return 0;
}
}
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, host->dma_dir);
- imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
- host->res->start + MMC_REG_BUFFER_ACCESS,
- DMA_MODE_READ);
+ ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
+ datasize,
+ host->res->start + MMC_REG_BUFFER_ACCESS,
+ DMA_MODE_READ);
} else {
host->dma_dir = DMA_TO_DEVICE;
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, host->dma_dir);
- imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
- host->res->start + MMC_REG_BUFFER_ACCESS,
- DMA_MODE_WRITE);
+ ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
+ datasize,
+ host->res->start + MMC_REG_BUFFER_ACCESS,
+ DMA_MODE_WRITE);
}
+ if (ret) {
+ dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret);
+ return ret;
+ }
wmb();
imx_dma_enable(host->dma);
#endif /* HAS_DMA */
+ return 0;
}
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
stat = readl(host->base + MMC_REG_STATUS);
if (stat & STATUS_ERR_MASK)
return stat;
- if (time_after(jiffies, timeout))
+ if (time_after(jiffies, timeout)) {
+ mxcmci_softreset(host);
+ mxcmci_set_clk_rate(host, host->clock);
return STATUS_TIME_OUT_READ;
+ }
if (stat & mask)
return 0;
cpu_relax();
{
struct mxcmci_host *host = mmc_priv(mmc);
unsigned int cmdat = host->cmdat;
+ int error;
WARN_ON(host->req != NULL);
host->do_dma = 1;
#endif
if (req->data) {
- mxcmci_setup_data(host, req->data);
+ error = mxcmci_setup_data(host, req->data);
+ if (error) {
+ req->cmd->error = error;
+ goto out;
+ }
+
cmdat |= CMD_DAT_CONT_DATA_ENABLE;
cmdat |= CMD_DAT_CONT_WRITE;
}
- if (mxcmci_start_cmd(host, req->cmd, cmdat))
+ error = mxcmci_start_cmd(host, req->cmd, cmdat);
+out:
+ if (error)
mxcmci_finish_request(host, req);
}
goto out_clk_put;
}
- mmc->f_min = clk_get_rate(host->clk) >> 7;
+ mmc->f_min = clk_get_rate(host->clk) >> 16;
+ if (mmc->f_min < 400000)
+ mmc->f_min = 400000;
mmc->f_max = clk_get_rate(host->clk) >> 1;
/* recommended in data sheet */
struct timer_list dma_timer;
unsigned dma_len;
- short power_pin;
-
struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS];
struct mmc_omap_slot *current_slot;
spinlock_t slot_lock;
del_timer(&host->cmd_abort_timer);
host->abort = 1;
OMAP_MMC_WRITE(host, IE, 0);
- disable_irq(host->irq);
+ disable_irq_nosync(host->irq);
schedule_work(&host->cmd_abort_work);
return IRQ_HANDLED;
}
struct mmc_request *mrq = host->mrq;
host->mrq = NULL;
- mmc_omap_fclk_lazy_disable(host);
mmc_request_done(host->mmc, mrq);
return;
}
if (host->mrq == NULL) {
OMAP_HSMMC_WRITE(host->base, STAT,
OMAP_HSMMC_READ(host->base, STAT));
+ /* Flush posted write */
+ OMAP_HSMMC_READ(host->base, STAT);
return IRQ_HANDLED;
}
}
OMAP_HSMMC_WRITE(host->base, STAT, status);
+ /* Flush posted write */
+ OMAP_HSMMC_READ(host->base, STAT);
- if (end_cmd || (status & CC))
+ if (end_cmd || ((status & CC) && host->cmd))
mmc_omap_cmd_done(host, host->cmd);
if (end_trans || (status & TC))
mmc_omap_xfer_done(host, data);
host->dma_ch = -1;
/*
* DMA Callback: run in interrupt context.
- * mutex_unlock will through a kernel warning if used.
+ * mutex_unlock will throw a kernel warning if used.
*/
up(&host->sem);
}
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
- return in_be16(host->ioaddr + (reg ^ 0x2));
+ u16 ret;
+
+ if (unlikely(reg == SDHCI_HOST_VERSION))
+ ret = in_be16(host->ioaddr + reg);
+ else
+ ret = in_be16(host->ioaddr + (reg ^ 0x2));
+ return ret;
}
static u8 esdhc_readb(struct sdhci_host *host, int reg)
static const struct of_device_id sdhci_of_match[] = {
{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
+ { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
{ .compatible = "generic-sdhci", },
{},
};
host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
if (IS_ERR(host)) {
- ret = PTR_ERR(host);
- goto unmap;
+ dev_err(&pdev->dev, "cannot allocate host\n");
+ return ERR_PTR(PTR_ERR(host));
}
slot = sdhci_priv(host);
ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
if (ret) {
dev_err(&pdev->dev, "cannot request region\n");
- return ERR_PTR(ret);
+ goto free;
}
addr = pci_resource_start(pdev, bar);
release:
pci_release_region(pdev, bar);
+
+free:
sdhci_free_host(host);
return ERR_PTR(ret);
module_init(sdhci_drv_init);
module_exit(sdhci_drv_exit);
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver");
MODULE_LICENSE("GPL");
module_param(debug_quirks, uint, 0444);
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
MODULE_LICENSE("GPL");
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
- SDHCI_INT_DATA_END_BIT)
+ SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
module_param_named(dma, param_dma, int, 0444);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver");
#ifdef CONFIG_PNP
#define SR_SRWD 0x80 /* SR write protect */
/* Define max times to check status register before we give up. */
-#define MAX_READY_WAIT_COUNT 100000
+#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */
#define CMD_SIZE 4
#ifdef CONFIG_M25PXX_USE_FAST_READ
*/
static int wait_till_ready(struct m25p *flash)
{
- int count;
+ unsigned long deadline;
int sr;
- /* one chip guarantees max 5 msec wait here after page writes,
- * but potentially three seconds (!) after page erase.
- */
- for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
+ deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+
+ do {
if ((sr = read_sr(flash)) < 0)
break;
else if (!(sr & SR_WIP))
return 0;
- /* REVISIT sometimes sleeping would be best */
- }
+ cond_resched();
+
+ } while (!time_after_eq(jiffies, deadline));
return 1;
}
mutex_lock(&flash->lock);
/* whole-chip erase? */
- if (len == flash->mtd.size && erase_chip(flash)) {
- instr->state = MTD_ERASE_FAILED;
- mutex_unlock(&flash->lock);
- return -EIO;
+ if (len == flash->mtd.size) {
+ if (erase_chip(flash)) {
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return -EIO;
+ }
/* REVISIT in some cases we could speed up erasing large regions
* by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up
/* Calculate flash page address; use block erase (for speed) if
* we're at a block boundary and need to erase the whole block.
*/
- pageaddr = div_u64(instr->len, priv->page_size);
+ pageaddr = div_u64(instr->addr, priv->page_size);
do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
pageaddr = pageaddr << priv->page_offset;
*/
static void mtd_release(struct device *dev)
{
- struct mtd_info *mtd = dev_to_mtd(dev);
+ dev_t index = MTD_DEVT(dev_to_mtd(dev)->index);
/* remove /dev/mtdXro node if needed */
- if (MTD_DEVT(mtd->index))
- device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1);
+ if (index)
+ device_destroy(mtd_class, index + 1);
}
static ssize_t mtd_type_show(struct device *dev,
}
static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
+static ssize_t mtd_subpagesize_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = dev_to_mtd(dev);
+ unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
+
+}
+static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
+
static ssize_t mtd_oobsize_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
&dev_attr_size.attr,
&dev_attr_erasesize.attr,
&dev_attr_writesize.attr,
+ &dev_attr_subpagesize.attr,
&dev_attr_oobsize.attr,
&dev_attr_numeraseregions.attr,
&dev_attr_name.attr,
ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (ret < 0) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return ret;
}
cafe->ctl1 &= ~CTRL1_CHIPSELECT;
}
-static int cafe_nand_interrupt(int irq, void *id)
+static irqreturn_t cafe_nand_interrupt(int irq, void *id)
{
struct mtd_info *mtd = id;
struct cafe_priv *cafe = mtd->priv;
}
info->chip.ecc.mode = ecc_mode;
- info->clk = clk_get(&pdev->dev, "AEMIFCLK");
+ info->clk = clk_get(&pdev->dev, "aemif");
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
- dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
goto err_clk;
}
ret = clk_enable(info->clk);
if (ret < 0) {
- dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret);
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
goto err_clk_enable;
}
break;
case NAND_CMD_READID:
+ host->col_addr = 0;
send_read_id(host);
break;
mtd->priv = this;
mtd->owner = THIS_MODULE;
mtd->dev.parent = &pdev->dev;
+ mtd->name = "mxc_nand";
/* 50 us command delay time */
this->chip_delay = 5;
this->verify_buf = mxc_nand_verify_buf;
host->clk = clk_get(&pdev->dev, "nfc");
- if (IS_ERR(host->clk))
+ if (IS_ERR(host->clk)) {
+ err = PTR_ERR(host->clk);
goto eclk;
+ }
clk_enable(host->clk);
host->clk_act = 1;
host->regs = ioremap(res->start, res->end - res->start + 1);
if (!host->regs) {
- err = -EIO;
+ err = -ENOMEM;
goto eres;
}
#ifdef CONFIG_PM
static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
- if (info)
- ret = info->suspend(info);
-
- /* Disable the NFC clock */
- clk_disable(nfc_clk); /* FIXME */
+ if (mtd) {
+ ret = mtd->suspend(mtd);
+ /* Disable the NFC clock */
+ clk_disable(host->clk);
+ }
return ret;
}
static int mxcnd_resume(struct platform_device *pdev)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
- /* Enable the NFC clock */
- clk_enable(nfc_clk); /* FIXME */
- if (info)
- info->resume(info);
+ if (mtd) {
+ /* Enable the NFC clock */
+ clk_enable(host->clk);
+ mtd->resume(mtd);
+ }
return ret;
}
static int __init mxc_nd_init(void)
{
- /* Register the device driver structure. */
- pr_info("MXC MTD nand Driver\n");
- if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
- printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
- return -ENODEV;
- }
- return 0;
+ return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
}
static void __exit mxc_nd_cleanup(void)
#ifdef CONFIG_EISA
static struct eisa_device_id el3_eisa_ids[] = {
+ { "TCM5090" },
+ { "TCM5091" },
{ "TCM5092" },
{ "TCM5093" },
+ { "TCM5094" },
{ "TCM5095" },
+ { "TCM5098" },
{ "" }
};
MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
/* Must enable Tx/Rx before setting transfer thresholds! */
RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
RTL_W32 (RxConfig, tp->rx_config);
RTL_W32 (TxConfig, rtl8139_tx_config);
- tp->cur_rx = 0;
-
rtl_check_media (dev, 1);
if (tp->chipset >= CH_8139B) {
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
- /* init Rx ring buffer DMA address */
- RTL_W32_F (RxBuf, tp->rx_ring_dma);
-
/* init Tx buffer DMA addresses */
for (i = 0; i < NUM_TX_DESC; i++)
RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
config COMPAT_NET_DEV_OPS
default y
- bool "Enable older network device API compatiablity"
+ bool "Enable older network device API compatibility"
---help---
- This option enables kernel compatiability with older network devices
+ This option enables kernel compatibility with older network devices
that do not use net_device_ops interface.
If unsure, say Y.
depends on NET_ETHERNET && HAS_IOMEM
select MII
select PHYLIB
+ select CRC32
+ select BITREVERSE
help
Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
+config IGBVF
+ tristate "Intel(R) 82576 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82576 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igbvf.
+
source "drivers/net/ixp2000/Kconfig"
config MYRI_SBUS
obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
obj-$(CONFIG_IGB) += igb/
+obj-$(CONFIG_IGBVF) += igbvf/
obj-$(CONFIG_IXGBE) += ixgbe/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
+obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_HP100) += hp100.o
.remove = __devexit_p(a2065_remove_one),
};
+static const struct net_device_ops lance_netdev_ops = {
+ .ndo_open = lance_open,
+ .ndo_stop = lance_close,
+ .ndo_start_xmit = lance_start_xmit,
+ .ndo_tx_timeout = lance_tx_timeout,
+ .ndo_set_multicast_list = lance_set_multicast,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __devinit a2065_init_one(struct zorro_dev *z,
const struct zorro_device_id *ent)
{
priv->rx_ring_mod_mask = RX_RING_MOD_MASK;
priv->tx_ring_mod_mask = TX_RING_MOD_MASK;
- dev->open = &lance_open;
- dev->stop = &lance_close;
- dev->hard_start_xmit = &lance_start_xmit;
- dev->tx_timeout = &lance_tx_timeout;
+ dev->netdev_ops = &lance_netdev_ops;
dev->watchdog_timeo = 5*HZ;
- dev->set_multicast_list = &lance_set_multicast;
dev->dma = 0;
init_timer(&priv->multicast_timer);
.remove = __devexit_p(ariadne_remove_one),
};
+static const struct net_device_ops ariadne_netdev_ops = {
+ .ndo_open = ariadne_open,
+ .ndo_stop = ariadne_close,
+ .ndo_start_xmit = ariadne_start_xmit,
+ .ndo_tx_timeout = ariadne_tx_timeout,
+ .ndo_get_stats = ariadne_get_stats,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __devinit ariadne_init_one(struct zorro_dev *z,
const struct zorro_device_id *ent)
{
dev->mem_start = ZTWO_VADDR(mem_start);
dev->mem_end = dev->mem_start+ARIADNE_RAM_SIZE;
- dev->open = &ariadne_open;
- dev->stop = &ariadne_close;
- dev->hard_start_xmit = &ariadne_start_xmit;
- dev->tx_timeout = &ariadne_tx_timeout;
+ dev->netdev_ops = &ariadne_netdev_ops;
dev->watchdog_timeo = 5*HZ;
- dev->get_stats = &ariadne_get_stats;
- dev->set_multicast_list = &set_multicast_list;
err = register_netdev(dev);
if (err) {
if (net_debug && version_printed++ == 0)
printk(KERN_INFO "%s", version);
}
+static const struct net_device_ops am79c961_netdev_ops = {
+ .ndo_open = am79c961_open,
+ .ndo_stop = am79c961_close,
+ .ndo_start_xmit = am79c961_sendpacket,
+ .ndo_get_stats = am79c961_getstats,
+ .ndo_set_multicast_list = am79c961_setmulticastlist,
+ .ndo_tx_timeout = am79c961_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = am79c961_poll_controller,
+#endif
+};
static int __init am79c961_probe(struct platform_device *pdev)
{
if (am79c961_hw_init(dev))
goto release;
- dev->open = am79c961_open;
- dev->stop = am79c961_close;
- dev->hard_start_xmit = am79c961_sendpacket;
- dev->get_stats = am79c961_getstats;
- dev->set_multicast_list = am79c961_setmulticastlist;
- dev->tx_timeout = am79c961_timeout;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = am79c961_poll_controller;
-#endif
+ dev->netdev_ops = &am79c961_netdev_ops;
ret = register_netdev(dev);
if (ret == 0) {
/*
* Enable/Disable promiscuous and multicast modes.
*/
-static void at91ether_set_rx_mode(struct net_device *dev)
+static void at91ether_set_multicast_list(struct net_device *dev)
{
unsigned long cfg;
/*
* Transmit packet.
*/
-static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
+static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct at91_private *lp = netdev_priv(dev);
dev->trans_start = jiffies;
} else {
- printk(KERN_ERR "at91_ether.c: at91ether_tx() called, but device is busy!\n");
+ printk(KERN_ERR "at91_ether.c: at91ether_start_xmit() called, but device is busy!\n");
return 1; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
on this skb, he also reports -ENETDOWN and printk's, so either
we free and return(0) or don't free and return 1 */
}
#endif
+static const struct net_device_ops at91ether_netdev_ops = {
+ .ndo_open = at91ether_open,
+ .ndo_stop = at91ether_close,
+ .ndo_start_xmit = at91ether_start_xmit,
+ .ndo_get_stats = at91ether_stats,
+ .ndo_set_multicast_list = at91ether_set_multicast_list,
+ .ndo_set_mac_address = set_mac_address,
+ .ndo_do_ioctl = at91ether_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = at91ether_poll_controller,
+#endif
+};
+
/*
* Initialize the ethernet interface
*/
spin_lock_init(&lp->lock);
ether_setup(dev);
- dev->open = at91ether_open;
- dev->stop = at91ether_close;
- dev->hard_start_xmit = at91ether_tx;
- dev->get_stats = at91ether_stats;
- dev->set_multicast_list = at91ether_set_rx_mode;
- dev->set_mac_address = set_mac_address;
+ dev->netdev_ops = &at91ether_netdev_ops;
dev->ethtool_ops = &at91ether_ethtool_ops;
- dev->do_ioctl = at91ether_ioctl;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = at91ether_poll_controller;
-#endif
SET_NETDEV_DEV(dev, &pdev->dev);
struct ep93xx_priv
{
struct resource *res;
- void *base_addr;
+ void __iomem *base_addr;
int irq;
struct ep93xx_descs *descs;
.get_link = ep93xx_get_link,
};
-struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
+static const struct net_device_ops ep93xx_netdev_ops = {
+ .ndo_open = ep93xx_open,
+ .ndo_stop = ep93xx_close,
+ .ndo_start_xmit = ep93xx_xmit,
+ .ndo_get_stats = ep93xx_get_stats,
+ .ndo_do_ioctl = ep93xx_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+static struct net_device *ep93xx_dev_alloc(struct ep93xx_eth_data *data)
{
struct net_device *dev;
memcpy(dev->dev_addr, data->dev_addr, ETH_ALEN);
- dev->get_stats = ep93xx_get_stats;
dev->ethtool_ops = &ep93xx_ethtool_ops;
- dev->hard_start_xmit = ep93xx_xmit;
- dev->open = ep93xx_open;
- dev->stop = ep93xx_close;
- dev->do_ioctl = ep93xx_ioctl;
+ dev->netdev_ops = &ep93xx_netdev_ops;
dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM;
printk(KERN_INFO "%s", version);
}
+static const struct net_device_ops ether1_netdev_ops = {
+ .ndo_open = ether1_open,
+ .ndo_stop = ether1_close,
+ .ndo_start_xmit = ether1_sendpacket,
+ .ndo_get_stats = ether1_getstats,
+ .ndo_set_multicast_list = ether1_setmulticastlist,
+ .ndo_tx_timeout = ether1_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __devinit
ether1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
goto free;
}
- dev->open = ether1_open;
- dev->stop = ether1_close;
- dev->hard_start_xmit = ether1_sendpacket;
- dev->get_stats = ether1_getstats;
- dev->set_multicast_list = ether1_setmulticastlist;
- dev->tx_timeout = ether1_timeout;
+ dev->netdev_ops = ðer1_netdev_ops;
dev->watchdog_timeo = 5 * HZ / 100;
ret = register_netdev(dev);
printk(KERN_INFO "%s", version);
}
+static const struct net_device_ops ether3_netdev_ops = {
+ .ndo_open = ether3_open,
+ .ndo_stop = ether3_close,
+ .ndo_start_xmit = ether3_sendpacket,
+ .ndo_get_stats = ether3_getstats,
+ .ndo_set_multicast_list = ether3_setmulticastlist,
+ .ndo_tx_timeout = ether3_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __devinit
ether3_probe(struct expansion_card *ec, const struct ecard_id *id)
{
goto free;
}
- dev->open = ether3_open;
- dev->stop = ether3_close;
- dev->hard_start_xmit = ether3_sendpacket;
- dev->get_stats = ether3_getstats;
- dev->set_multicast_list = ether3_setmulticastlist;
- dev->tx_timeout = ether3_timeout;
+ dev->netdev_ops = ðer3_netdev_ops;
dev->watchdog_timeo = 5 * HZ / 100;
ret = register_netdev(dev);
if (cpu_is_ixp43x()) {
/* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
- return -ENOSYS;
+ return -ENODEV;
mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
} else {
/* All MII PHY accesses use NPE-B Ethernet registers */
if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
- return -ENOSYS;
+ return -ENODEV;
mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
}
regs_phys = IXP4XX_EthC_BASE_PHYS;
break;
default:
- err = -ENOSYS;
+ err = -ENODEV;
goto err_free;
}
goto err_free;
}
- if (register_netdev(dev)) {
- err = -EIO;
- goto err_npe_rel;
- }
-
port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
if (!port->mem_res) {
err = -EBUSY;
- goto err_unreg;
+ goto err_npe_rel;
}
port->plat = plat;
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
- if (IS_ERR(port->phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(port->phydev);
- }
+ if ((err = IS_ERR(port->phydev)))
+ goto err_free_mem;
port->phydev->irq = PHY_POLL;
+ if ((err = register_netdev(dev)))
+ goto err_phy_dis;
+
printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
npe_name(port->npe));
return 0;
-err_unreg:
- unregister_netdev(dev);
+err_phy_dis:
+ phy_disconnect(port->phydev);
+err_free_mem:
+ npe_port_tab[NPE_ID(port->id)] = NULL;
+ platform_set_drvdata(pdev, NULL);
+ release_resource(port->mem_res);
err_npe_rel:
npe_release(port->npe);
err_free:
struct port *port = netdev_priv(dev);
unregister_netdev(dev);
+ phy_disconnect(port->phydev);
npe_port_tab[NPE_ID(port->id)] = NULL;
platform_set_drvdata(pdev, NULL);
npe_release(port->npe);
return( ret );
}
+static const struct net_device_ops lance_netdev_ops = {
+ .ndo_open = lance_open,
+ .ndo_stop = lance_close,
+ .ndo_start_xmit = lance_start_xmit,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_set_mac_address = lance_set_mac_address,
+ .ndo_tx_timeout = lance_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
static unsigned long __init lance_probe1( struct net_device *dev,
struct lance_addr *init_rec )
if (did_version++ == 0)
DPRINTK( 1, ( version ));
- /* The LANCE-specific entries in the device structure. */
- dev->open = &lance_open;
- dev->hard_start_xmit = &lance_start_xmit;
- dev->stop = &lance_close;
- dev->set_multicast_list = &set_multicast_list;
- dev->set_mac_address = &lance_set_mac_address;
+ dev->netdev_ops = &lance_netdev_ops;
/* XXX MSch */
- dev->tx_timeout = lance_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
return( 1 );
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
- (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+ if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
goto err_dma;
}
*/
static struct pci_device_id atl1e_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
/* required last entry */
{ 0 }
};
#include "atl1.h"
+#define ATLX_DRIVER_VERSION "2.1.3"
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
+ Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATLX_DRIVER_VERSION);
+
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
#include <linux/module.h>
#include <linux/types.h>
-#define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
- Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(ATLX_DRIVER_VERSION);
-
#define ATLX_ERR_PHY 2
#define ATLX_ERR_PHY_SPEED 7
#define ATLX_ERR_PHY_RES 8
netif_wake_queue(dev);
}
-static void set_rx_mode(struct net_device *dev)
+static void au1000_multicast_list(struct net_device *dev)
{
struct au1000_private *aup = netdev_priv(dev);
if (au1000_debug > 4)
- printk("%s: set_rx_mode: flags=%x\n", dev->name, dev->flags);
+ printk("%s: au1000_multicast_list: flags=%x\n", dev->name, dev->flags);
if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
aup->mac->control |= MAC_PROMISCUOUS;
return phy_mii_ioctl(aup->phy_dev, if_mii(rq), cmd);
}
+static const struct net_device_ops au1000_netdev_ops = {
+ .ndo_open = au1000_open,
+ .ndo_stop = au1000_close,
+ .ndo_start_xmit = au1000_tx,
+ .ndo_set_multicast_list = au1000_multicast_list,
+ .ndo_do_ioctl = au1000_ioctl,
+ .ndo_tx_timeout = au1000_tx_timeout,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static struct net_device * au1000_probe(int port_num)
{
static unsigned version_printed = 0;
dev->base_addr = base;
dev->irq = irq;
- dev->open = au1000_open;
- dev->hard_start_xmit = au1000_tx;
- dev->stop = au1000_close;
- dev->set_multicast_list = &set_rx_mode;
- dev->do_ioctl = &au1000_ioctl;
+ dev->netdev_ops = &au1000_netdev_ops;
SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
- dev->tx_timeout = au1000_tx_timeout;
dev->watchdog_timeo = ETH_TX_TIMEOUT;
/*
#define DRV_VER "2.0.348"
#define DRV_NAME "be2net"
#define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC"
+#define OC_NAME "Emulex OneConnect 10Gbps NIC"
#define DRV_DESC BE_NAME "Driver"
+#define BE_VENDOR_ID 0x19a2
+#define BE_DEVICE_ID1 0x211
+#define OC_DEVICE_ID1 0x700
+#define OC_DEVICE_ID2 0x701
+
+static inline char *nic_name(struct pci_dev *pdev)
+{
+ if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+ return OC_NAME;
+ else
+ return BE_NAME;
+}
+
/* Number of bytes of an RX frame that are copied to skb->data */
#define BE_HDR_LEN 64
#define BE_MAX_JUMBO_FRAME_SIZE 9018
be_cmd_get_flow_control(&adapter->ctrl, &ecmd->tx_pause,
&ecmd->rx_pause);
- ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->autoneg = 0;
}
static int
struct be_adapter *adapter = netdev_priv(netdev);
int status;
- if (ecmd->autoneg != AUTONEG_ENABLE)
+ if (ecmd->autoneg != 0)
return -EINVAL;
status = be_cmd_set_flow_control(&adapter->ctrl, ecmd->tx_pause,
module_param(rx_frag_size, uint, S_IRUGO);
MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
-#define BE_VENDOR_ID 0x19a2
-#define BE2_DEVICE_ID_1 0x0211
static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
- { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+ { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, be_dev_ids);
be_msix_enable(adapter);
- status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (!status) {
netdev->features |= NETIF_F_HIGHDMA;
} else {
- status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (status) {
dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
goto free_netdev;
if (status != 0)
goto stats_clean;
- dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+ dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
return 0;
stats_clean:
disable_dev:
pci_disable_device(pdev);
do_none:
- dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+ dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev));
return status;
}
}
/*
- *
* this makes the board clean up everything that it can
* and not talk to the outside world. Caused by
* an 'ifconfig ethX down'
return 0;
}
+static const struct net_device_ops bfin_mac_netdev_ops = {
+ .ndo_open = bfin_mac_open,
+ .ndo_stop = bfin_mac_close,
+ .ndo_start_xmit = bfin_mac_hard_start_xmit,
+ .ndo_set_mac_address = bfin_mac_set_mac_address,
+ .ndo_tx_timeout = bfin_mac_timeout,
+ .ndo_set_multicast_list = bfin_mac_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = bfin_mac_poll,
+#endif
+};
+
static int __devinit bfin_mac_probe(struct platform_device *pdev)
{
struct net_device *ndev;
/* Fill in the fields of the device structure with ethernet values. */
ether_setup(ndev);
- ndev->open = bfin_mac_open;
- ndev->stop = bfin_mac_close;
- ndev->hard_start_xmit = bfin_mac_hard_start_xmit;
- ndev->set_mac_address = bfin_mac_set_mac_address;
- ndev->tx_timeout = bfin_mac_timeout;
- ndev->set_multicast_list = bfin_mac_set_multicast_list;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = bfin_mac_poll;
-#endif
+ ndev->netdev_ops = &bfin_mac_netdev_ops;
ndev->ethtool_ops = &bfin_mac_ethtool_ops;
spin_lock_init(&lp->lock);
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "2.0.0"
-#define DRV_MODULE_RELDATE "April 2, 2009"
+#define DRV_MODULE_VERSION "2.0.1"
+#define DRV_MODULE_RELDATE "May 6, 2009"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw"
#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw"
#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw"
/* Tell compiler that status block fields can change. */
barrier();
cons = *bnapi->hw_tx_cons_ptr;
+ barrier();
if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
cons++;
return cons;
/* Tell compiler that status block fields can change. */
barrier();
cons = *bnapi->hw_rx_cons_ptr;
+ barrier();
if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
cons++;
return cons;
bnx2_request_firmware(struct bnx2 *bp)
{
const char *mips_fw_file, *rv2p_fw_file;
- const struct bnx2_mips_fw_file *mips;
- const struct bnx2_rv2p_fw_file *rv2p;
+ const struct bnx2_mips_fw_file *mips_fw;
+ const struct bnx2_rv2p_fw_file *rv2p_fw;
int rc;
if (CHIP_NUM(bp) == CHIP_NUM_5709) {
rv2p_fw_file);
return rc;
}
- mips = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
- rv2p = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data;
- if (bp->mips_firmware->size < sizeof(*mips) ||
- check_mips_fw_entry(bp->mips_firmware, &mips->com) ||
- check_mips_fw_entry(bp->mips_firmware, &mips->cp) ||
- check_mips_fw_entry(bp->mips_firmware, &mips->rxp) ||
- check_mips_fw_entry(bp->mips_firmware, &mips->tpat) ||
- check_mips_fw_entry(bp->mips_firmware, &mips->txp)) {
+ mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data;
+ rv2p_fw = (const struct bnx2_rv2p_fw_file *) bp->rv2p_firmware->data;
+ if (bp->mips_firmware->size < sizeof(*mips_fw) ||
+ check_mips_fw_entry(bp->mips_firmware, &mips_fw->com) ||
+ check_mips_fw_entry(bp->mips_firmware, &mips_fw->cp) ||
+ check_mips_fw_entry(bp->mips_firmware, &mips_fw->rxp) ||
+ check_mips_fw_entry(bp->mips_firmware, &mips_fw->tpat) ||
+ check_mips_fw_entry(bp->mips_firmware, &mips_fw->txp)) {
printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
mips_fw_file);
return -EINVAL;
}
- if (bp->rv2p_firmware->size < sizeof(*rv2p) ||
- check_fw_section(bp->rv2p_firmware, &rv2p->proc1.rv2p, 8, true) ||
- check_fw_section(bp->rv2p_firmware, &rv2p->proc2.rv2p, 8, true)) {
+ if (bp->rv2p_firmware->size < sizeof(*rv2p_fw) ||
+ check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc1.rv2p, 8, true) ||
+ check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc2.rv2p, 8, true)) {
printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n",
rv2p_fw_file);
return -EINVAL;
return best;
}
+static int agg_device_up(const struct aggregator *agg)
+{
+ return (netif_running(agg->slave->dev) &&
+ netif_carrier_ok(agg->slave->dev));
+}
+
/**
* ad_agg_selection_logic - select an aggregation group for a team
* @aggregator: the aggregator we're looking at
struct port *port;
origin = agg;
-
active = __get_active_agg(agg);
- best = active;
+ best = (active && agg_device_up(active)) ? active : NULL;
do {
agg->is_active = 0;
- if (agg->num_of_ports)
+ if (agg->num_of_ports && agg_device_up(agg))
best = ad_agg_selection_test(best, agg);
} while ((agg = __get_next_agg(agg)));
if (arp->op_code == htons(ARPOP_REPLY)) {
/* update rx hash table for this ARP */
- printk("rar: update orig %s bond_dev %s\n", orig_dev->name,
- bond_dev->name);
bond = netdev_priv(bond_dev);
rlb_update_entry_from_arp(bond, arp);
pr_debug("Server received an ARP Reply from client\n");
* Called with RTNL
*/
int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
- __releases(&bond->curr_slave_lock)
- __releases(&bond->lock)
__acquires(&bond->lock)
- __acquires(&bond->curr_slave_lock)
+ __releases(&bond->lock)
{
struct bonding *bond = netdev_priv(bond_dev);
struct sockaddr *sa = addr;
}
}
- write_unlock_bh(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
-
if (swap_slave) {
alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
bond->alb_info.rlb_enabled);
+ read_lock(&bond->lock);
alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);
if (bond->alb_info.rlb_enabled) {
/* inform clients mac address has changed */
rlb_req_update_slave_clients(bond, bond->curr_active_slave);
}
+ read_unlock(&bond->lock);
}
- read_lock(&bond->lock);
- write_lock_bh(&bond->curr_slave_lock);
-
return 0;
}
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
- int i, found = 0;
-
- if (info->slave_id < 0) {
- return -ENODEV;
- }
+ int i, res = -ENODEV;
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i) {
if (i == (int)info->slave_id) {
- found = 1;
+ res = 0;
+ strcpy(info->slave_name, slave->dev->name);
+ info->link = slave->link;
+ info->state = slave->state;
+ info->link_failure_count = slave->link_failure_count;
break;
}
}
read_unlock(&bond->lock);
- if (found) {
- strcpy(info->slave_name, slave->dev->name);
- info->link = slave->link;
- info->state = slave->state;
- info->link_failure_count = slave->link_failure_count;
- } else {
- return -ENODEV;
- }
-
- return 0;
+ return res;
}
/*-------------------------------- Monitoring -------------------------------*/
for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
if (!targets[i])
- continue;
+ break;
pr_debug("basa: target %x\n", targets[i]);
if (list_empty(&bond->vlan_list)) {
pr_debug("basa: empty vlan: arp_send\n");
int i;
__be32 *targets = bond->params.arp_targets;
- targets = bond->params.arp_targets;
for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
pr_debug("bva: sip %pI4 tip %pI4 t[%d] %pI4 bhti(tip) %d\n",
&sip, &tip, i, &targets[i], bond_has_this_ip(bond, tip));
for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
if (!bond->params.arp_targets[i])
- continue;
+ break;
if (printed)
seq_printf(seq, ",");
seq_printf(seq, " %pI4", &bond->params.arp_targets[i]);
up_write(&bonding_rwsem);
rtnl_unlock(); /* allows sysfs registration of net device */
res = bond_create_sysfs_entry(netdev_priv(bond_dev));
- if (res < 0) {
- rtnl_lock();
- down_write(&bonding_rwsem);
- bond_deinit(bond_dev);
- unregister_netdevice(bond_dev);
- goto out_rtnl;
- }
+ if (res < 0)
+ goto out_unreg;
return 0;
+out_unreg:
+ rtnl_lock();
+ down_write(&bonding_rwsem);
+ unregister_netdevice(bond_dev);
out_bond:
bond_deinit(bond_dev);
out_netdev:
{
int i;
int res;
- struct bonding *bond;
printk(KERN_INFO "%s", version);
goto out;
err:
- list_for_each_entry(bond, &bond_dev_list, bond_list) {
- bond_work_cancel_all(bond);
- destroy_workqueue(bond->wq);
- }
-
- bond_destroy_sysfs();
-
rtnl_lock();
bond_free_all();
rtnl_unlock();
goto out;
}
/* look for an empty slot to put the target in, and check for dupes */
- for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) { /* duplicate */
printk(KERN_ERR DRV_NAME
": %s: ARP target %pI4 is already present\n",
bond->dev->name, &newtarget);
- if (done)
- targets[i] = 0;
ret = -EINVAL;
goto out;
}
- if (targets[i] == 0 && !done) {
+ if (targets[i] == 0) {
printk(KERN_INFO DRV_NAME
": %s: adding ARP target %pI4.\n",
bond->dev->name, &newtarget);
goto out;
}
- for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
+ for (i = 0; (i < BOND_MAX_ARP_TARGETS) && !done; i++) {
if (targets[i] == newtarget) {
+ int j;
printk(KERN_INFO DRV_NAME
": %s: removing ARP target %pI4.\n",
bond->dev->name, &newtarget);
- targets[i] = 0;
+ for (j = i; (j < (BOND_MAX_ARP_TARGETS-1)) && targets[j+1]; j++)
+ targets[j] = targets[j+1];
+
+ targets[j] = 0;
done = 1;
}
}
struct transceiver_ops* transceiver = &transceivers[0];
+static const struct net_device_ops e100_netdev_ops = {
+ .ndo_open = e100_open,
+ .ndo_stop = e100_close,
+ .ndo_start_xmit = e100_send_packet,
+ .ndo_tx_timeout = e100_tx_timeout,
+ .ndo_get_stats = e100_get_stats,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_do_ioctl = e100_ioctl,
+ .ndo_set_mac_address = e100_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_config = e100_set_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e100_netpoll,
+#endif
+};
+
#define tx_done(dev) (*R_DMA_CH0_CMD == 0)
/*
/* fill in our handlers so the network layer can talk to us in the future */
- dev->open = e100_open;
- dev->hard_start_xmit = e100_send_packet;
- dev->stop = e100_close;
- dev->get_stats = e100_get_stats;
- dev->set_multicast_list = set_multicast_list;
- dev->set_mac_address = e100_set_mac_address;
dev->ethtool_ops = &e100_ethtool_ops;
- dev->do_ioctl = e100_ioctl;
- dev->set_config = e100_set_config;
- dev->tx_timeout = e100_tx_timeout;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = e100_netpoll;
-#endif
+ dev->netdev_ops = &e100_netdev_ops;
spin_lock_init(&np->lock);
spin_lock_init(&np->led_lock);
struct page *page;
void *va;
unsigned int offset;
- u64 *p_cnt;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ unsigned long *p_cnt;
+ dma_addr_t mapping;
};
struct rx_desc;
spin_unlock_irq(&adapter->work_lock);
free_irq_resources(adapter);
- flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
quiesce_rx(adapter);
+ flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
}
static void schedule_chk_task(struct adapter *adap)
sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group);
+ /* Flush work scheduled while releasing TIDs */
+ flush_scheduled_work();
+
tdev->lldev = NULL;
cxgb3_set_dummy_ops(tdev);
t3_tp_set_offload_mode(adapter, 0);
struct port_info *pi = netdev_priv(dev);
struct adapter *adapter = pi->adapter;
+
+ if (!adapter->open_device_map)
+ return 0;
+
/* Stop link fault interrupts */
t3_xgm_intr_disable(adapter, pi->port_id);
t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset);
spin_unlock_irq(&adapter->work_lock);
if (!(adapter->open_device_map & PORT_MASK))
- cancel_rearming_delayed_workqueue(cxgb3_wq,
- &adapter->adap_check_task);
+ cancel_delayed_work_sync(&adapter->adap_check_task);
if (!adapter->open_device_map)
cxgb_down(adapter);
for_each_port(adapter, i) {
struct net_device *dev = adapter->port[i];
struct port_info *p = netdev_priv(dev);
+ int link_fault;
spin_lock_irq(&adapter->work_lock);
- if (p->link_fault) {
- spin_unlock_irq(&adapter->work_lock);
+ link_fault = p->link_fault;
+ spin_unlock_irq(&adapter->work_lock);
+
+ if (link_fault) {
+ t3_link_fault(adapter, i);
continue;
}
- spin_unlock_irq(&adapter->work_lock);
if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) {
t3_xgm_intr_disable(adapter, i);
adapter->check_task_cnt++;
- /* Check link status for PHYs without interrupts */
- if (p->linkpoll_period)
- check_link_status(adapter);
+ check_link_status(adapter);
/* Accumulate MAC stats if needed */
if (!p->linkpoll_period ||
spin_unlock(&adapter->work_lock);
}
-static void link_fault_task(struct work_struct *work)
-{
- struct adapter *adapter = container_of(work, struct adapter,
- link_fault_handler_task);
- int i;
-
- for_each_port(adapter, i) {
- struct net_device *netdev = adapter->port[i];
- struct port_info *pi = netdev_priv(netdev);
-
- if (pi->link_fault)
- t3_link_fault(adapter, i);
- }
-}
-
void t3_os_link_fault_handler(struct adapter *adapter, int port_id)
{
struct net_device *netdev = adapter->port[port_id];
spin_lock(&adapter->work_lock);
pi->link_fault = 1;
- queue_work(cxgb3_wq, &adapter->link_fault_handler_task);
spin_unlock(&adapter->work_lock);
}
struct adapter *adapter = pci_get_drvdata(pdev);
int ret;
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
ret = t3_adapter_error(adapter, 0);
/* Request a slot reset. */
while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
vectors = err;
- if (!err && vectors < (adap->params.nports + 1))
+ if (err < 0)
+ pci_disable_msix(adap->pdev);
+
+ if (!err && vectors < (adap->params.nports + 1)) {
+ pci_disable_msix(adap->pdev);
err = -1;
+ }
if (!err) {
for (i = 0; i < vectors; ++i)
INIT_LIST_HEAD(&adapter->adapter_list);
INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task);
- INIT_WORK(&adapter->link_fault_handler_task, link_fault_task);
INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task);
INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
(*d->pg_chunk.p_cnt)--;
if (!*d->pg_chunk.p_cnt)
pci_unmap_page(pdev,
- pci_unmap_addr(&d->pg_chunk, mapping),
+ d->pg_chunk.mapping,
q->alloc_size, PCI_DMA_FROMDEVICE);
put_page(d->pg_chunk.page);
q->pg_chunk.offset = 0;
mapping = pci_map_page(adapter->pdev, q->pg_chunk.page,
0, q->alloc_size, PCI_DMA_FROMDEVICE);
- pci_unmap_addr_set(&q->pg_chunk, mapping, mapping);
+ q->pg_chunk.mapping = mapping;
}
sd->pg_chunk = q->pg_chunk;
nomem: q->alloc_failed++;
break;
}
- mapping = pci_unmap_addr(&sd->pg_chunk, mapping) +
- sd->pg_chunk.offset;
+ mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset;
pci_unmap_addr_set(sd, dma_addr, mapping);
add_one_rx_chunk(mapping, d, q->gen);
(*sd->pg_chunk.p_cnt)--;
if (!*sd->pg_chunk.p_cnt)
pci_unmap_page(adap->pdev,
- pci_unmap_addr(&sd->pg_chunk, mapping),
+ sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
if (!skb) {
(*sd->pg_chunk.p_cnt)--;
if (!*sd->pg_chunk.p_cnt)
pci_unmap_page(adap->pdev,
- pci_unmap_addr(&sd->pg_chunk, mapping),
+ sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
struct cphy *phy = &pi->phy;
struct cmac *mac = &pi->mac;
struct link_config *lc = &pi->link_config;
- int force_link_down = 0;
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
status = t3_read_reg(adapter, A_XGM_INT_STATUS + mac->offset);
if (status & F_LINKFAULTCHANGE) {
mac->stats.link_faults++;
- force_link_down = 1;
+ pi->link_fault = 1;
}
t3_open_rx_traffic(mac, rx_cfg, rx_hash_high, rx_hash_low);
-
- if (force_link_down) {
- t3_os_link_fault_handler(adapter, port_id);
- return;
- }
}
if (lc->requested_fc & PAUSE_AUTONEG)
A_XGM_INT_STATUS + mac->offset);
link_fault &= F_LINKFAULTCHANGE;
+ link_ok = lc->link_ok;
+ speed = lc->speed;
+ duplex = lc->duplex;
+ fc = lc->fc;
+
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
if (link_fault) {
/* Account link faults only when the phy reports a link up */
if (link_ok)
mac->stats.link_faults++;
-
- msleep(1000);
- t3_os_link_fault_handler(adapter, port_id);
} else {
if (link_ok)
t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset,
adapter->params.info = ai;
adapter->params.nports = ai->nports0 + ai->nports1;
- adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1);
+ adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1);
adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
/*
* We used to only run the "adapter check task" once a second if
lance_set_multicast(dev);
}
+static const struct net_device_ops lance_netdev_ops = {
+ .ndo_open = lance_open,
+ .ndo_stop = lance_close,
+ .ndo_start_xmit = lance_start_xmit,
+ .ndo_tx_timeout = lance_tx_timeout,
+ .ndo_set_multicast_list = lance_set_multicast,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __init dec_lance_probe(struct device *bdev, const int type)
{
static unsigned version_printed;
printk(", addr = %pM, irq = %d\n", dev->dev_addr, dev->irq);
- dev->open = &lance_open;
- dev->stop = &lance_close;
- dev->hard_start_xmit = &lance_start_xmit;
- dev->tx_timeout = &lance_tx_timeout;
+ dev->netdev_ops = &lance_netdev_ops;
dev->watchdog_timeo = 5*HZ;
- dev->set_multicast_list = &lance_set_multicast;
/* lp->ll is the location of the registers for lance card */
lp->ll = ll;
#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
-static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
E100_82552_SMARTSPEED, smartspeed |
E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
}
- if (pci_enable_wake(pdev, PCI_D3cold, true))
- pci_enable_wake(pdev, PCI_D3hot, true);
+ *enable_wake = true;
} else {
- pci_enable_wake(pdev, PCI_D3hot, false);
+ *enable_wake = false;
}
pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+}
- return 0;
+static int __e100_power_off(struct pci_dev *pdev, bool wake)
+{
+ if (wake) {
+ return pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ return pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#ifdef CONFIG_PM
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ return __e100_power_off(pdev, wake);
+}
+
static int e100_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
static void e100_shutdown(struct pci_dev *pdev)
{
- e100_suspend(pdev, PMSG_SUSPEND);
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ if (system_state == SYSTEM_POWER_OFF)
+ __e100_power_off(pdev, wake);
}
/* ------------------ PCI Error Recovery infrastructure -------------- */
static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
static void e1000_restore_vlan(struct e1000_adapter *adapter);
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
static int e1000_resume(struct pci_dev *pdev);
#endif
static void e1000_shutdown(struct pci_dev *pdev);
struct e1000_hw *hw = &adapter->hw;
u32 rctl, icr = er32(ICR);
- if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
return IRQ_NONE; /* Not our interrupt */
/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
struct e1000_buffer *buffer_info;
unsigned int i, eop;
unsigned int count = 0;
- bool cleaned;
unsigned int total_tx_bytes=0, total_tx_packets=0;
i = tx_ring->next_to_clean;
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
(count < tx_ring->count)) {
- for (cleaned = false; !cleaned; count++) {
+ bool cleaned = false;
+ for ( ; !cleaned; count++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
tx_ring->next_to_clean = i;
#define TX_WAKE_THRESHOLD 32
- if (unlikely(cleaned && netif_carrier_ok(netdev) &&
+ if (unlikely(count && netif_carrier_ok(netdev) &&
E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
/* Make sure that anybody stopping the queue after this
* sees the new next_to_clean.
PCI_DMA_FROMDEVICE);
length = le16_to_cpu(rx_desc->length);
-
- if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, also make sure the frame isn't just CRC only */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
" buffers\n", netdev->name);
return 0;
}
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
ew32(WUC, E1000_WUC_PME_EN);
ew32(WUFC, wufc);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
} else {
ew32(WUC, 0);
ew32(WUFC, 0);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
}
e1000_release_manageability(adapter);
+ *enable_wake = !!wufc;
+
/* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->en_mng_pt) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- }
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
if (hw->phy_type == e1000_phy_igp_3)
e1000_phy_powerdown_workaround(hw);
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
static int e1000_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
static void e1000_shutdown(struct pci_dev *pdev)
{
- e1000_suspend(pdev, PMSG_SUSPEND);
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#ifdef CONFIG_NET_POLL_CONTROLLER
struct e1000_buffer *buffer_info;
unsigned int i, eop;
unsigned int count = 0;
- bool cleaned;
unsigned int total_tx_bytes = 0, total_tx_packets = 0;
i = tx_ring->next_to_clean;
while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
(count < tx_ring->count)) {
- for (cleaned = 0; !cleaned; count++) {
+ bool cleaned = false;
+ for (; !cleaned; count++) {
tx_desc = E1000_TX_DESC(*tx_ring, i);
buffer_info = &tx_ring->buffer_info[i];
cleaned = (i == eop);
tx_ring->next_to_clean = i;
#define TX_WAKE_THRESHOLD 32
- if (cleaned && netif_carrier_ok(netdev) &&
- e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
+ if (count && netif_carrier_ok(netdev) &&
+ e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
/* Make sure that anybody stopping the queue after this
* sees the new next_to_clean.
*/
}
}
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
ew32(WUC, E1000_WUC_PME_EN);
ew32(WUFC, wufc);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
} else {
ew32(WUC, 0);
ew32(WUFC, 0);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
}
+ *enable_wake = !!wufc;
+
/* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->flags & FLAG_MNG_PT_ENABLED) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- }
+ if (adapter->flags & FLAG_MNG_PT_ENABLED)
+ *enable_wake = true;
if (adapter->hw.phy.type == e1000_phy_igp_3)
e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
pci_disable_device(pdev);
+ return 0;
+}
+
+static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
+{
+ if (sleep && wake) {
+ pci_prepare_to_sleep(pdev);
+ return;
+ }
+
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
+ bool wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
/*
* The pci-e switch on some quad port adapters will report a
* correctable error when the MAC transitions from D0 to D3. To
pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
(devctl & ~PCI_EXP_DEVCTL_CERE));
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ e1000_power_off(pdev, sleep, wake);
pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
} else {
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ e1000_power_off(pdev, sleep, wake);
}
-
- return 0;
}
static void e1000e_disable_l1aspm(struct pci_dev *pdev)
}
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (!retval)
+ e1000_complete_shutdown(pdev, true, wake);
+
+ return retval;
+}
+
static int e1000_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
static void e1000_shutdown(struct pci_dev *pdev)
{
- e1000_suspend(pdev, PMSG_SUSPEND);
+ bool wake = false;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF)
+ e1000_complete_shutdown(pdev, false, wake);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0100"
+#define DRV_VERSION "EHEA_0101"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
x &= (arr_len - 1);
pref = skb_array[x];
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
-
- pref = (skb_array[x]->data);
- prefetch(pref);
- prefetch(pref + EHEA_CACHE_LINE);
- prefetch(pref + EHEA_CACHE_LINE * 2);
- prefetch(pref + EHEA_CACHE_LINE * 3);
+ if (pref) {
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
+
+ pref = (skb_array[x]->data);
+ prefetch(pref);
+ prefetch(pref + EHEA_CACHE_LINE);
+ prefetch(pref + EHEA_CACHE_LINE * 2);
+ prefetch(pref + EHEA_CACHE_LINE * 3);
+ }
+
skb = skb_array[skb_index];
skb_array[skb_index] = NULL;
return skb;
x &= (arr_len - 1);
pref = skb_array[x];
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
+ if (pref) {
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
- pref = (skb_array[x]->data);
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
+ pref = (skb_array[x]->data);
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
+ }
skb = skb_array[wqe_index];
skb_array[wqe_index] = NULL;
.ndo_change_mtu = ehea_change_mtu,
.ndo_vlan_rx_register = ehea_vlan_rx_register,
.ndo_vlan_rx_add_vid = ehea_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid
+ .ndo_vlan_rx_kill_vid = ehea_vlan_rx_kill_vid,
+ .ndo_tx_timeout = ehea_tx_watchdog,
};
struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
| NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX
| NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
| NETIF_F_LLTX;
- dev->tx_timeout = &ehea_tx_watchdog;
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
INIT_WORK(&port->reset_task, ehea_reset_port);
}
spin_unlock_bh(&eql->queue.lock);
+ dev_put(slave_dev);
+
return ret;
}
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = 0x0d000000;
}
+#endif
#ifdef CONFIG_M5272
static void __inline__ fec_get_mac(struct net_device *dev)
};
static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
+/*
+ * Power down phy when interface is down (persists through reboot;
+ * older Linux and other OSes may not power it up again)
+ */
+static int phy_power_down = 0;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
/* restart auto negotiation, power down phy */
mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
- mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN);
+ mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+ if (phy_power_down) {
+ mii_control |= BMCR_PDOWN;
+ }
if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
return PHY_ERROR;
}
np->tx_pkts_in_progress = 0;
np->tx_change_owner = NULL;
np->tx_end_flip = NULL;
+ np->tx_stop = 0;
for (i = 0; i < np->tx_ring_size; i++) {
if (!nv_optimized(np)) {
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
u32 status;
+ union ring_type put_tx;
+ int saved_tx_limit;
if (np->msi_flags & NV_MSI_X_ENABLED)
status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
/* 1) stop tx engine */
nv_stop_tx(dev);
- /* 2) check that the packets were not sent already: */
+ /* 2) complete any outstanding tx and do not give HW any limited tx pkts */
+ saved_tx_limit = np->tx_limit;
+ np->tx_limit = 0; /* prevent giving HW any limited pkts */
+ np->tx_stop = 0; /* prevent waking tx queue */
if (!nv_optimized(np))
nv_tx_done(dev, np->tx_ring_size);
else
nv_tx_done_optimized(dev, np->tx_ring_size);
- /* 3) if there are dead entries: clear everything */
- if (np->get_tx_ctx != np->put_tx_ctx) {
- printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
- nv_drain_tx(dev);
- nv_init_tx(dev);
- setup_hw_rings(dev, NV_SETUP_TX_RING);
- }
+ /* save current HW postion */
+ if (np->tx_change_owner)
+ put_tx.ex = np->tx_change_owner->first_tx_desc;
+ else
+ put_tx = np->put_tx;
- netif_wake_queue(dev);
+ /* 3) clear all tx state */
+ nv_drain_tx(dev);
+ nv_init_tx(dev);
- /* 4) restart tx engine */
+ /* 4) restore state to current HW position */
+ np->get_tx = np->put_tx = put_tx;
+ np->tx_limit = saved_tx_limit;
+
+ /* 5) restart tx engine */
nv_start_tx(dev);
+ netif_wake_queue(dev);
spin_unlock_irq(&np->lock);
}
mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
}
spin_unlock_irqrestore(&np->lock, flags);
- __napi_complete(napi);
+ napi_complete(napi);
return rx_work;
}
if (rx_work < budget) {
/* re-enable interrupts
(msix not enabled in napi) */
- __napi_complete(napi);
+ napi_complete(napi);
writel(np->irqmask, base + NvRegIrqMask);
}
nv_drain_rxtx(dev);
- if (np->wolenabled) {
+ if (np->wolenabled || !phy_power_down) {
writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
nv_start_rx(dev);
} else {
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
module_param(phy_cross, int, 0);
MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_power_down, int, 0);
+MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0).");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
#define IS_FEC(match) 0
#endif
+static const struct net_device_ops fs_enet_netdev_ops = {
+ .ndo_open = fs_enet_open,
+ .ndo_stop = fs_enet_close,
+ .ndo_get_stats = fs_enet_get_stats,
+ .ndo_start_xmit = fs_enet_start_xmit,
+ .ndo_tx_timeout = fs_timeout,
+ .ndo_set_multicast_list = fs_set_multicast_list,
+ .ndo_do_ioctl = fs_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = fs_enet_netpoll,
+#endif
+};
+
static int __devinit fs_enet_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
fep->tx_ring = fpi->tx_ring;
fep->rx_ring = fpi->rx_ring;
- ndev->open = fs_enet_open;
- ndev->hard_start_xmit = fs_enet_start_xmit;
- ndev->tx_timeout = fs_timeout;
+ ndev->netdev_ops = &fs_enet_netdev_ops;
ndev->watchdog_timeo = 2 * HZ;
- ndev->stop = fs_enet_close;
- ndev->get_stats = fs_enet_get_stats;
- ndev->set_multicast_list = fs_set_multicast_list;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- ndev->poll_controller = fs_enet_netpoll;
-#endif
if (fpi->use_napi)
netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi,
fpi->napi_weight);
ndev->ethtool_ops = &fs_ethtool_ops;
- ndev->do_ioctl = fs_ioctl;
init_timer(&fep->phy_timer_list);
struct net_device *dev = priv->ndev;
if (dev->flags & IFF_UP) {
+ netif_stop_queue(dev);
stop_gfar(dev);
startup_gfar(dev);
+ netif_start_queue(dev);
}
netif_tx_schedule_all(dev);
if (unlikely(!newskb))
newskb = skb;
- else if (skb)
+ else if (skb) {
+ /*
+ * We need to reset ->data to what it
+ * was before gfar_new_skb() re-aligned
+ * it to an RXBUF_ALIGNMENT boundary
+ * before we put the skb back on the
+ * recycle list.
+ */
+ skb->data = skb->head + NET_SKB_PAD;
__skb_queue_head(&priv->rx_recycle, skb);
+ }
} else {
/* Increment the number of packets */
dev->stats.rx_packets++;
(IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
| IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \
- | IEVENT_MAG)
+ | IEVENT_MAG | IEVENT_BABR)
#define IMASK_INIT_CLEAR 0x00000000
#define IMASK_BABR 0x80000000
return 0;
}
+static const struct net_device_ops emac_netdev_ops = {
+ .ndo_open = emac_open,
+ .ndo_stop = emac_close,
+ .ndo_get_stats = emac_stats,
+ .ndo_set_multicast_list = emac_set_multicast_list,
+ .ndo_do_ioctl = emac_ioctl,
+ .ndo_tx_timeout = emac_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_start_xmit = emac_start_xmit,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
+static const struct net_device_ops emac_gige_netdev_ops = {
+ .ndo_open = emac_open,
+ .ndo_stop = emac_close,
+ .ndo_get_stats = emac_stats,
+ .ndo_set_multicast_list = emac_set_multicast_list,
+ .ndo_do_ioctl = emac_ioctl,
+ .ndo_tx_timeout = emac_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_start_xmit = emac_start_xmit_sg,
+ .ndo_change_mtu = emac_change_mtu,
+};
+
static int __devinit emac_probe(struct of_device *ofdev,
const struct of_device_id *match)
{
if (err != 0)
goto err_detach_tah;
- /* Fill in the driver function table */
- ndev->open = &emac_open;
if (dev->tah_dev)
ndev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
- ndev->tx_timeout = &emac_tx_timeout;
ndev->watchdog_timeo = 5 * HZ;
- ndev->stop = &emac_close;
- ndev->get_stats = &emac_stats;
- ndev->set_multicast_list = &emac_set_multicast_list;
- ndev->do_ioctl = &emac_ioctl;
if (emac_phy_supports_gige(dev->phy_mode)) {
- ndev->hard_start_xmit = &emac_start_xmit_sg;
- ndev->change_mtu = &emac_change_mtu;
+ ndev->netdev_ops = &emac_gige_netdev_ops;
dev->commac.ops = &emac_commac_sg_ops;
- } else {
- ndev->hard_start_xmit = &emac_start_xmit;
- }
+ } else
+ ndev->netdev_ops = &emac_netdev_ops;
SET_ETHTOOL_OPS(ndev, &emac_ethtool_ops);
netif_carrier_off(ndev);
* Writes value at the given offset in the register array which stores
* the VLAN filter table.
**/
-void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
{
array_wr32(E1000_VFTA, offset, value);
wrfl();
s32 igb_check_alt_mac_addr(struct e1000_hw *hw);
void igb_reset_adaptive(struct e1000_hw *hw);
void igb_update_adaptive(struct e1000_hw *hw);
-void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
* returns SUCCESS if it successfully received a message notification and
* copied it into the receive buffer.
**/
-s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
{
struct e1000_mbx_info *mbx = &hw->mbx;
s32 ret_val = -E1000_ERR_MBX;
* returns SUCCESS if it successfully copied message into the buffer and
* received an ack to that message within delay * timeout period
**/
-s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
{
struct e1000_mbx_info *mbx = &hw->mbx;
s32 ret_val = 0;
return ret_val;
}
-/**
- * e1000_init_mbx_ops_generic - Initialize NVM function pointers
- * @hw: pointer to the HW structure
- *
- * Setups up the function pointers to no-op functions
- **/
-void e1000_init_mbx_ops_generic(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- mbx->ops.read_posted = igb_read_posted_mbx;
- mbx->ops.write_posted = igb_write_posted_mbx;
-}
-
static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
{
u32 mbvficr = rd32(E1000_MBVFICR);
s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 igb_read_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 igb_write_posted_mbx(struct e1000_hw *, u32 *, u16, u16);
s32 igb_check_for_msg(struct e1000_hw *, u16);
s32 igb_check_for_ack(struct e1000_hw *, u16);
s32 igb_check_for_rst(struct e1000_hw *, u16);
/* for netdump / net console */
static void igb_netpoll(struct net_device *);
#endif
-
#ifdef CONFIG_PCI_IOV
-static ssize_t igb_set_num_vfs(struct device *, struct device_attribute *,
- const char *, size_t);
-static ssize_t igb_show_num_vfs(struct device *, struct device_attribute *,
- char *);
-DEVICE_ATTR(num_vfs, S_IRUGO | S_IWUSR, igb_show_num_vfs, igb_set_num_vfs);
-#endif
+static unsigned int max_vfs = 0;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
+ "per physical function");
+#endif /* CONFIG_PCI_IOV */
+
static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
pci_channel_state_t);
static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
/* If we can't do MSI-X, try MSI */
msi_only:
+#ifdef CONFIG_PCI_IOV
+ /* disable SR-IOV for non MSI-X configurations */
+ if (adapter->vf_data) {
+ struct e1000_hw *hw = &adapter->hw;
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+ msleep(500);
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ msleep(100);
+ dev_info(&adapter->pdev->dev, "IOV Disabled\n");
+ }
+#endif
adapter->num_rx_queues = 1;
adapter->num_tx_queues = 1;
if (!pci_enable_msi(adapter->pdev))
if (err)
goto err_sw_init;
+#ifdef CONFIG_PCI_IOV
+ /* since iov functionality isn't critical to base device function we
+ * can accept failure. If it fails we don't allow iov to be enabled */
+ if (hw->mac.type == e1000_82576) {
+ /* 82576 supports a maximum of 7 VFs in addition to the PF */
+ unsigned int num_vfs = (max_vfs > 7) ? 7 : max_vfs;
+ int i;
+ unsigned char mac_addr[ETH_ALEN];
+
+ if (num_vfs) {
+ adapter->vf_data = kcalloc(num_vfs,
+ sizeof(struct vf_data_storage),
+ GFP_KERNEL);
+ if (!adapter->vf_data) {
+ dev_err(&pdev->dev,
+ "Could not allocate VF private data - "
+ "IOV enable failed\n");
+ } else {
+ err = pci_enable_sriov(pdev, num_vfs);
+ if (!err) {
+ adapter->vfs_allocated_count = num_vfs;
+ dev_info(&pdev->dev,
+ "%d vfs allocated\n",
+ num_vfs);
+ for (i = 0;
+ i < adapter->vfs_allocated_count;
+ i++) {
+ random_ether_addr(mac_addr);
+ igb_set_vf_mac(adapter, i,
+ mac_addr);
+ }
+ } else {
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ }
+ }
+ }
+ }
+
+#endif
/* setup the private structure */
err = igb_sw_init(adapter);
if (err)
if (err)
goto err_register;
-#ifdef CONFIG_PCI_IOV
- /* since iov functionality isn't critical to base device function we
- * can accept failure. If it fails we don't allow iov to be enabled */
- if (hw->mac.type == e1000_82576) {
- err = pci_enable_sriov(pdev, 0);
- if (!err)
- err = device_create_file(&netdev->dev,
- &dev_attr_num_vfs);
- if (err)
- dev_err(&pdev->dev, "Failed to initialize IOV\n");
- }
-
-#endif
#ifdef CONFIG_IGB_DCA
if (dca_add_requester(&pdev->dev) == 0) {
adapter->flags |= IGB_FLAG_DCA_ENABLED;
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
u32 srrctl = 0;
- int i, j;
+ int i;
rctl = rd32(E1000_RCTL);
if (adapter->vfs_allocated_count) {
u32 vmolr;
- j = adapter->rx_ring[0].reg_idx;
-
/* set all queue drop enable bits */
wr32(E1000_QDE, ALL_QUEUES);
srrctl |= E1000_SRRCTL_DROP_EN;
/* disable queue 0 to prevent tail write w/o re-config */
wr32(E1000_RXDCTL(0), 0);
- vmolr = rd32(E1000_VMOLR(j));
+ vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
if (rctl & E1000_RCTL_LPE)
vmolr |= E1000_VMOLR_LPE;
- if (adapter->num_rx_queues > 0)
+ if (adapter->num_rx_queues > 1)
vmolr |= E1000_VMOLR_RSSE;
- wr32(E1000_VMOLR(j), vmolr);
+ wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
}
for (i = 0; i < adapter->num_rx_queues; i++) {
- j = adapter->rx_ring[i].reg_idx;
+ int j = adapter->rx_ring[i].reg_idx;
wr32(E1000_SRRCTL(j), srrctl);
}
igb_vmdq_set_replication_pf(hw, true);
}
-#ifdef CONFIG_PCI_IOV
-static ssize_t igb_show_num_vfs(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct igb_adapter *adapter = netdev_priv(to_net_dev(dev));
-
- return sprintf(buf, "%d\n", adapter->vfs_allocated_count);
-}
-
-static ssize_t igb_set_num_vfs(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct net_device *netdev = to_net_dev(dev);
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- unsigned int num_vfs, i;
- unsigned char mac_addr[ETH_ALEN];
- int err;
-
- sscanf(buf, "%u", &num_vfs);
-
- if (num_vfs > 7)
- num_vfs = 7;
-
- /* value unchanged do nothing */
- if (num_vfs == adapter->vfs_allocated_count)
- return count;
-
- if (netdev->flags & IFF_UP)
- igb_close(netdev);
-
- igb_reset_interrupt_capability(adapter);
- igb_free_queues(adapter);
- adapter->tx_ring = NULL;
- adapter->rx_ring = NULL;
- adapter->vfs_allocated_count = 0;
-
- /* reclaim resources allocated to VFs since we are changing count */
- if (adapter->vf_data) {
- /* disable iov and allow time for transactions to clear */
- pci_disable_sriov(pdev);
- msleep(500);
-
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
- wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
- msleep(100);
- dev_info(&pdev->dev, "IOV Disabled\n");
- }
-
- if (num_vfs) {
- adapter->vf_data = kcalloc(num_vfs,
- sizeof(struct vf_data_storage),
- GFP_KERNEL);
- if (!adapter->vf_data) {
- dev_err(&pdev->dev, "Could not allocate VF private "
- "data - IOV enable failed\n");
- } else {
- err = pci_enable_sriov(pdev, num_vfs);
- if (!err) {
- adapter->vfs_allocated_count = num_vfs;
- dev_info(&pdev->dev, "%d vfs allocated\n", num_vfs);
- for (i = 0; i < adapter->vfs_allocated_count; i++) {
- random_ether_addr(mac_addr);
- igb_set_vf_mac(adapter, i, mac_addr);
- }
- } else {
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
- }
- }
- }
-
- igb_set_interrupt_capability(adapter);
- igb_alloc_queues(adapter);
- igb_reset(adapter);
-
- if (netdev->flags & IFF_UP)
- igb_open(netdev);
-
- return count;
-}
-#endif /* CONFIG_PCI_IOV */
/* igb_main.c */
--- /dev/null
+################################################################################
+#
+# Intel(R) 82576 Virtual Function Linux driver
+# Copyright(c) 2009 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82576 VF ethernet driver
+#
+
+obj-$(CONFIG_IGBVF) += igbvf.o
+
+igbvf-objs := vf.o \
+ mbx.o \
+ ethtool.o \
+ netdev.o
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* IVAR valid bit */
+#define E1000_IVAR_VALID 0x80
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+/* Device Control */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_MBX 15
+
+#ifndef ETH_ADDR_LEN
+#define ETH_ADDR_LEN 6
+#endif
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+
+#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
+
+/* Additional Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+
+#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+
+#endif /* _E1000_DEFINES_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for igbvf */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include "igbvf.h"
+#include <linux/if_vlan.h>
+
+
+struct igbvf_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+ int base_stat_offset;
+};
+
+#define IGBVF_STAT(current, base) \
+ sizeof(((struct igbvf_adapter *)0)->current), \
+ offsetof(struct igbvf_adapter, current), \
+ offsetof(struct igbvf_adapter, base)
+
+static const struct igbvf_stats igbvf_gstrings_stats[] = {
+ { "rx_packets", IGBVF_STAT(stats.gprc, stats.base_gprc) },
+ { "tx_packets", IGBVF_STAT(stats.gptc, stats.base_gptc) },
+ { "rx_bytes", IGBVF_STAT(stats.gorc, stats.base_gorc) },
+ { "tx_bytes", IGBVF_STAT(stats.gotc, stats.base_gotc) },
+ { "multicast", IGBVF_STAT(stats.mprc, stats.base_mprc) },
+ { "lbrx_bytes", IGBVF_STAT(stats.gorlbc, stats.base_gorlbc) },
+ { "lbrx_packets", IGBVF_STAT(stats.gprlbc, stats.base_gprlbc) },
+ { "tx_restart_queue", IGBVF_STAT(restart_queue, zero_base) },
+ { "rx_long_byte_count", IGBVF_STAT(stats.gorc, stats.base_gorc) },
+ { "rx_csum_offload_good", IGBVF_STAT(hw_csum_good, zero_base) },
+ { "rx_csum_offload_errors", IGBVF_STAT(hw_csum_err, zero_base) },
+ { "rx_header_split", IGBVF_STAT(rx_hdr_split, zero_base) },
+ { "alloc_rx_buff_failed", IGBVF_STAT(alloc_rx_buff_failed, zero_base) },
+};
+
+#define IGBVF_GLOBAL_STATS_LEN ARRAY_SIZE(igbvf_gstrings_stats)
+
+static const char igbvf_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)"
+};
+
+#define IGBVF_TEST_LEN ARRAY_SIZE(igbvf_gstrings_test)
+
+static int igbvf_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status;
+
+ ecmd->supported = SUPPORTED_1000baseT_Full;
+
+ ecmd->advertising = ADVERTISED_1000baseT_Full;
+
+ ecmd->port = -1;
+ ecmd->transceiver = XCVR_DUMMY1;
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ if (status & E1000_STATUS_SPEED_1000)
+ ecmd->speed = 1000;
+ else if (status & E1000_STATUS_SPEED_100)
+ ecmd->speed = 100;
+ else
+ ecmd->speed = 10;
+
+ if (status & E1000_STATUS_FD)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static u32 igbvf_get_link(struct net_device *netdev)
+{
+ return netif_carrier_ok(netdev);
+}
+
+static int igbvf_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ return -EOPNOTSUPP;
+}
+
+static void igbvf_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ return;
+}
+
+static int igbvf_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ return -EOPNOTSUPP;
+}
+
+static u32 igbvf_get_tx_csum(struct net_device *netdev)
+{
+ return ((netdev->features & NETIF_F_IP_CSUM) != 0);
+}
+
+static int igbvf_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+ else
+ netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+ return 0;
+}
+
+static int igbvf_set_tso(struct net_device *netdev, u32 data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ int i;
+ struct net_device *v_netdev;
+
+ if (data) {
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ } else {
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ /* disable TSO on all VLANs if they're present */
+ if (!adapter->vlgrp)
+ goto tso_out;
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ v_netdev = vlan_group_get_device(adapter->vlgrp, i);
+ if (!v_netdev)
+ continue;
+
+ v_netdev->features &= ~NETIF_F_TSO;
+ v_netdev->features &= ~NETIF_F_TSO6;
+ vlan_group_set_device(adapter->vlgrp, i, v_netdev);
+ }
+ }
+
+tso_out:
+ dev_info(&adapter->pdev->dev, "TSO is %s\n",
+ data ? "Enabled" : "Disabled");
+ adapter->flags |= FLAG_TSO_FORCE;
+ return 0;
+}
+
+static u32 igbvf_get_msglevel(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void igbvf_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int igbvf_get_regs_len(struct net_device *netdev)
+{
+#define IGBVF_REGS_LEN 8
+ return IGBVF_REGS_LEN * sizeof(u32);
+}
+
+static void igbvf_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u8 revision_id;
+
+ memset(p, 0, IGBVF_REGS_LEN * sizeof(u32));
+
+ pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id);
+
+ regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RDLEN(0));
+ regs_buff[3] = er32(RDH(0));
+ regs_buff[4] = er32(RDT(0));
+
+ regs_buff[5] = er32(TDLEN(0));
+ regs_buff[6] = er32(TDH(0));
+ regs_buff[7] = er32(TDT(0));
+}
+
+static int igbvf_get_eeprom_len(struct net_device *netdev)
+{
+ return 0;
+}
+
+static int igbvf_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ return -EOPNOTSUPP;
+}
+
+static int igbvf_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ return -EOPNOTSUPP;
+}
+
+static void igbvf_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32] = "N/A";
+
+ strncpy(drvinfo->driver, igbvf_driver_name, 32);
+ strncpy(drvinfo->version, igbvf_driver_version, 32);
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = igbvf_get_regs_len(netdev);
+ drvinfo->eedump_len = igbvf_get_eeprom_len(netdev);
+}
+
+static void igbvf_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+
+ ring->rx_max_pending = IGBVF_MAX_RXD;
+ ring->tx_max_pending = IGBVF_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rx_ring->count;
+ ring->tx_pending = tx_ring->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int igbvf_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct igbvf_ring *temp_ring;
+ int err;
+ u32 new_rx_count, new_tx_count;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = max(ring->rx_pending, (u32)IGBVF_MIN_RXD);
+ new_rx_count = min(new_rx_count, (u32)IGBVF_MAX_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = max(ring->tx_pending, (u32)IGBVF_MIN_TXD);
+ new_tx_count = min(new_tx_count, (u32)IGBVF_MAX_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring->count) &&
+ (new_rx_count == adapter->rx_ring->count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ temp_ring = vmalloc(sizeof(struct igbvf_ring));
+ if (!temp_ring)
+ return -ENOMEM;
+
+ while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ igbvf_down(adapter);
+
+ /*
+ * We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the tx and rx ring structs.
+ */
+ if (new_tx_count != adapter->tx_ring->count) {
+ memcpy(temp_ring, adapter->tx_ring, sizeof(struct igbvf_ring));
+
+ temp_ring->count = new_tx_count;
+ err = igbvf_setup_tx_resources(adapter, temp_ring);
+ if (err)
+ goto err_setup;
+
+ igbvf_free_tx_resources(adapter->tx_ring);
+
+ memcpy(adapter->tx_ring, temp_ring, sizeof(struct igbvf_ring));
+ }
+
+ if (new_rx_count != adapter->rx_ring->count) {
+ memcpy(temp_ring, adapter->rx_ring, sizeof(struct igbvf_ring));
+
+ temp_ring->count = new_rx_count;
+ err = igbvf_setup_rx_resources(adapter, temp_ring);
+ if (err)
+ goto err_setup;
+
+ igbvf_free_rx_resources(adapter->rx_ring);
+
+ memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
+ }
+
+ err = 0;
+err_setup:
+ if (netif_running(adapter->netdev))
+ igbvf_up(adapter);
+
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
+ vfree(temp_ring);
+ return err;
+}
+
+static int igbvf_link_test(struct igbvf_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+
+ hw->mac.ops.check_for_link(hw);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU))
+ *data = 1;
+
+ return *data;
+}
+
+static int igbvf_get_self_test_count(struct net_device *netdev)
+{
+ return IGBVF_TEST_LEN;
+}
+
+static int igbvf_get_stats_count(struct net_device *netdev)
+{
+ return IGBVF_GLOBAL_STATS_LEN;
+}
+
+static void igbvf_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ set_bit(__IGBVF_TESTING, &adapter->state);
+
+ /*
+ * Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
+ if (igbvf_link_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ clear_bit(__IGBVF_TESTING, &adapter->state);
+ msleep_interruptible(4 * 1000);
+}
+
+static void igbvf_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+
+ return;
+}
+
+static int igbvf_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ return -EOPNOTSUPP;
+}
+
+static int igbvf_phys_id(struct net_device *netdev, u32 data)
+{
+ return 0;
+}
+
+static int igbvf_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = adapter->itr_setting >> 2;
+
+ return 0;
+}
+
+static int igbvf_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ /* convert to rate of irq's per second */
+ if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = IGBVF_START_ITR;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = ec->rx_coalesce_usecs << 2;
+ adapter->itr_setting = adapter->itr;
+ }
+
+ writel(adapter->itr,
+ hw->hw_addr + adapter->rx_ring[0].itr_register);
+
+ return 0;
+}
+
+static int igbvf_nway_reset(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ igbvf_reinit_locked(adapter);
+ return 0;
+}
+
+
+static void igbvf_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ igbvf_update_stats(adapter);
+ for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
+ char *p = (char *)adapter +
+ igbvf_gstrings_stats[i].stat_offset;
+ char *b = (char *)adapter +
+ igbvf_gstrings_stats[i].base_stat_offset;
+ data[i] = ((igbvf_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
+ (*(u32 *)p - *(u32 *)b));
+ }
+
+}
+
+static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *igbvf_gstrings_test, sizeof(igbvf_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, igbvf_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static const struct ethtool_ops igbvf_ethtool_ops = {
+ .get_settings = igbvf_get_settings,
+ .set_settings = igbvf_set_settings,
+ .get_drvinfo = igbvf_get_drvinfo,
+ .get_regs_len = igbvf_get_regs_len,
+ .get_regs = igbvf_get_regs,
+ .get_wol = igbvf_get_wol,
+ .set_wol = igbvf_set_wol,
+ .get_msglevel = igbvf_get_msglevel,
+ .set_msglevel = igbvf_set_msglevel,
+ .nway_reset = igbvf_nway_reset,
+ .get_link = igbvf_get_link,
+ .get_eeprom_len = igbvf_get_eeprom_len,
+ .get_eeprom = igbvf_get_eeprom,
+ .set_eeprom = igbvf_set_eeprom,
+ .get_ringparam = igbvf_get_ringparam,
+ .set_ringparam = igbvf_set_ringparam,
+ .get_pauseparam = igbvf_get_pauseparam,
+ .set_pauseparam = igbvf_set_pauseparam,
+ .get_tx_csum = igbvf_get_tx_csum,
+ .set_tx_csum = igbvf_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = igbvf_set_tso,
+ .self_test = igbvf_diag_test,
+ .get_strings = igbvf_get_strings,
+ .phys_id = igbvf_phys_id,
+ .get_ethtool_stats = igbvf_get_ethtool_stats,
+ .self_test_count = igbvf_get_self_test_count,
+ .get_stats_count = igbvf_get_stats_count,
+ .get_coalesce = igbvf_get_coalesce,
+ .set_coalesce = igbvf_set_coalesce,
+};
+
+void igbvf_set_ethtool_ops(struct net_device *netdev)
+{
+ /* have to "undeclare" const on this struct to remove warnings */
+ SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igbvf_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGBVF_H_
+#define _IGBVF_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+
+
+#include "vf.h"
+
+/* Forward declarations */
+struct igbvf_info;
+struct igbvf_adapter;
+
+/* Interrupt defines */
+#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
+
+/* Interrupt modes, as used by the IntMode paramter */
+#define IGBVF_INT_MODE_LEGACY 0
+#define IGBVF_INT_MODE_MSI 1
+#define IGBVF_INT_MODE_MSIX 2
+
+/* Tx/Rx descriptor defines */
+#define IGBVF_DEFAULT_TXD 256
+#define IGBVF_MAX_TXD 4096
+#define IGBVF_MIN_TXD 80
+
+#define IGBVF_DEFAULT_RXD 256
+#define IGBVF_MAX_RXD 4096
+#define IGBVF_MIN_RXD 80
+
+#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGBVF_RX_PTHRESH 16
+#define IGBVF_RX_HTHRESH 8
+#define IGBVF_RX_WTHRESH 1
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define IGBVF_TX_QUEUE_WAKE 32
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGBVF_EEPROM_APME 0x0400
+
+#define IGBVF_MNG_VLAN_NONE (-1)
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+
+enum igbvf_boards {
+ board_vf,
+};
+
+struct igbvf_queue_stats {
+ u64 packets;
+ u64 bytes;
+};
+
+/*
+ * wrappers around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct igbvf_buffer {
+ dma_addr_t dma;
+ struct sk_buff *skb;
+ union {
+ /* Tx */
+ struct {
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ };
+ /* Rx */
+ struct {
+ struct page *page;
+ u64 page_dma;
+ unsigned int page_offset;
+ };
+ };
+ struct page *page;
+};
+
+union igbvf_desc {
+ union e1000_adv_rx_desc rx_desc;
+ union e1000_adv_tx_desc tx_desc;
+ struct e1000_adv_tx_context_desc tx_context_desc;
+};
+
+struct igbvf_ring {
+ struct igbvf_adapter *adapter; /* backlink */
+ union igbvf_desc *desc; /* pointer to ring memory */
+ dma_addr_t dma; /* phys address of ring */
+ unsigned int size; /* length of ring in bytes */
+ unsigned int count; /* number of desc. in ring */
+
+ u16 next_to_use;
+ u16 next_to_clean;
+
+ u16 head;
+ u16 tail;
+
+ /* array of buffer information structs */
+ struct igbvf_buffer *buffer_info;
+ struct napi_struct napi;
+
+ char name[IFNAMSIZ + 5];
+ u32 eims_value;
+ u32 itr_val;
+ u16 itr_register;
+ int set_itr;
+
+ struct sk_buff *rx_skb_top;
+
+ struct igbvf_queue_stats stats;
+};
+
+/* board specific private data structure */
+struct igbvf_adapter {
+ struct timer_list watchdog_timer;
+ struct timer_list blink_timer;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+
+ const struct igbvf_info *ei;
+
+ struct vlan_group *vlgrp;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 polling_interval;
+ u16 mng_vlan_id;
+ u16 link_speed;
+ u16 link_duplex;
+
+ spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
+
+ /* track device up/down/testing state */
+ unsigned long state;
+
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ /*
+ * Tx
+ */
+ struct igbvf_ring *tx_ring /* One per active queue */
+ ____cacheline_aligned_in_smp;
+
+ unsigned long tx_queue_len;
+ unsigned int restart_queue;
+ u32 txd_cmd;
+
+ bool detect_tx_hung;
+ u8 tx_timeout_factor;
+
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+
+ /* Tx stats */
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u32 tx_dma_failed;
+
+ /*
+ * Rx
+ */
+ struct igbvf_ring *rx_ring;
+
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+
+ /* Rx stats */
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ u32 rx_dma_failed;
+
+ unsigned int rx_ps_hdr_size;
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+ spinlock_t stats_lock; /* prevent concurrent stats updates */
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+
+ /* The VF counters don't clear on read so we have to get a base
+ * count on driver start up and always subtract that base on
+ * on the first update, thus the flag..
+ */
+ struct e1000_vf_stats stats;
+ u64 zero_base;
+
+ struct igbvf_ring test_tx_ring;
+ struct igbvf_ring test_rx_ring;
+ u32 test_icr;
+
+ u32 msg_enable;
+ struct msix_entry *msix_entries;
+ int int_mode;
+ u32 eims_enable_mask;
+ u32 eims_other;
+ u32 int_counter0;
+ u32 int_counter1;
+
+ u32 eeprom_wol;
+ u32 wol;
+ u32 pba;
+
+ bool fc_autoneg;
+
+ unsigned long led_status;
+
+ unsigned int flags;
+};
+
+struct igbvf_info {
+ enum e1000_mac_type mac;
+ unsigned int flags;
+ u32 pba;
+ void (*init_ops)(struct e1000_hw *);
+ s32 (*get_variants)(struct igbvf_adapter *);
+};
+
+/* hardware capability, feature, and workaround flags */
+#define FLAG_HAS_HW_VLAN_FILTER (1 << 0)
+#define FLAG_HAS_JUMBO_FRAMES (1 << 1)
+#define FLAG_MSI_ENABLED (1 << 2)
+#define FLAG_RX_CSUM_ENABLED (1 << 3)
+#define FLAG_TSO_FORCE (1 << 4)
+
+#define IGBVF_RX_DESC_ADV(R, i) \
+ (&((((R).desc))[i].rx_desc))
+#define IGBVF_TX_DESC_ADV(R, i) \
+ (&((((R).desc))[i].tx_desc))
+#define IGBVF_TX_CTXTDESC_ADV(R, i) \
+ (&((((R).desc))[i].tx_context_desc))
+
+enum igbvf_state_t {
+ __IGBVF_TESTING,
+ __IGBVF_RESETTING,
+ __IGBVF_DOWN
+};
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+extern char igbvf_driver_name[];
+extern const char igbvf_driver_version[];
+
+extern void igbvf_check_options(struct igbvf_adapter *);
+extern void igbvf_set_ethtool_ops(struct net_device *);
+
+extern int igbvf_up(struct igbvf_adapter *);
+extern void igbvf_down(struct igbvf_adapter *);
+extern void igbvf_reinit_locked(struct igbvf_adapter *);
+extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *);
+extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *);
+extern void igbvf_free_rx_resources(struct igbvf_ring *);
+extern void igbvf_free_tx_resources(struct igbvf_ring *);
+extern void igbvf_update_stats(struct igbvf_adapter *);
+
+extern unsigned int copybreak;
+
+#endif /* _IGBVF_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "mbx.h"
+
+/**
+ * e1000_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 e1000_poll_for_msg(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw)) {
+ countdown--;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ * e1000_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 e1000_poll_for_ack(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw)) {
+ countdown--;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ * e1000_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = e1000_poll_for_msg(hw);
+
+ /* if ack received read message, otherwise we timed out */
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* exit if we either can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg*/
+ ret_val = mbx->ops.write(hw, msg, size);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = e1000_poll_for_ack(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_v2p_mailbox - read v2p mailbox
+ * @hw: pointer to the HW structure
+ *
+ * This function is used to read the v2p mailbox without losing the read to
+ * clear status bits.
+ **/
+static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw)
+{
+ u32 v2p_mailbox = er32(V2PMAILBOX(0));
+
+ v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
+ hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;
+
+ return v2p_mailbox;
+}
+
+/**
+ * e1000_check_for_bit_vf - Determine if a status bit was set
+ * @hw: pointer to the HW structure
+ * @mask: bitmask for bits to be tested and cleared
+ *
+ * This function is used to check for the read to clear bits within
+ * the V2P mailbox.
+ **/
+static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
+{
+ u32 v2p_mailbox = e1000_read_v2p_mailbox(hw);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (v2p_mailbox & mask)
+ ret_val = E1000_SUCCESS;
+
+ hw->dev_spec.vf.v2p_mailbox &= ~mask;
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_msg_vf - checks to see if the PF has sent mail
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_msg_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_ack_vf - checks to see if the PF has ACK'd
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_ack_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_rst_vf - checks to see if the PF has reset
+ * @hw: pointer to the HW structure
+ *
+ * returns true if the PF has set the reset done bit or else false
+ **/
+static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
+ E1000_V2PMAILBOX_RSTI))) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_obtain_mbx_lock_vf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* Take ownership of the buffer */
+ ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
+
+ /* reserve mailbox for vf use */
+ if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
+ ret_val = E1000_SUCCESS;
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_mbx_vf - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ s32 err;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ err = e1000_obtain_mbx_lock_vf(hw);
+ if (err)
+ goto out_no_write;
+
+ /* flush any ack or msg as we are going to overwrite mailbox */
+ e1000_check_for_ack_vf(hw);
+ e1000_check_for_msg_vf(hw);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ array_ew32(VMBMEM(0), i, msg[i]);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+ /* Drop VFU and interrupt the PF to tell it a message has been sent */
+ ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);
+
+out_no_write:
+ return err;
+}
+
+/**
+ * e1000_read_mbx_vf - Reads a message from the inbox intended for vf
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfuly read message from buffer
+ **/
+static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ s32 err;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ err = e1000_obtain_mbx_lock_vf(hw);
+ if (err)
+ goto out_no_read;
+
+ /* copy the message from the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = array_er32(VMBMEM(0), i);
+
+ /* Acknowledge receipt and release mailbox, then we're done */
+ ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return err;
+}
+
+/**
+ * e1000_init_mbx_params_vf - set initial values for vf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+
+ /* start mailbox as timed out and let the reset_hw call set the timeout
+ * value to being communications */
+ mbx->timeout = 0;
+ mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
+
+ mbx->size = E1000_VFMAILBOX_SIZE;
+
+ mbx->ops.read = e1000_read_mbx_vf;
+ mbx->ops.write = e1000_write_mbx_vf;
+ mbx->ops.read_posted = e1000_read_posted_mbx;
+ mbx->ops.write_posted = e1000_write_posted_mbx;
+ mbx->ops.check_for_msg = e1000_check_for_msg_vf;
+ mbx->ops.check_for_ack = e1000_check_for_ack_vf;
+ mbx->ops.check_for_rst = e1000_check_for_rst_vf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return E1000_SUCCESS;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "vf.h"
+
+#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
+#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
+#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
+#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
+#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
+#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
+#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
+
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ clear to send requests */
+
+/* We have a total wait time of 1s for vf mailbox posted messages */
+#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mailbox timeout */
+#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
+
+#define E1000_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
+#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
+#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
+s32 e1000_init_mbx_params_vf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/pm_qos_params.h>
+
+#include "igbvf.h"
+
+#define DRV_VERSION "1.0.0-k0"
+char igbvf_driver_name[] = "igbvf";
+const char igbvf_driver_version[] = DRV_VERSION;
+static const char igbvf_driver_string[] =
+ "Intel(R) Virtual Function Network Driver";
+static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
+
+static int igbvf_poll(struct napi_struct *napi, int budget);
+static void igbvf_reset(struct igbvf_adapter *);
+static void igbvf_set_interrupt_capability(struct igbvf_adapter *);
+static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
+
+static struct igbvf_info igbvf_vf_info = {
+ .mac = e1000_vfadapt,
+ .flags = FLAG_HAS_JUMBO_FRAMES
+ | FLAG_RX_CSUM_ENABLED,
+ .pba = 10,
+ .init_ops = e1000_init_function_pointers_vf,
+};
+
+static const struct igbvf_info *igbvf_info_tbl[] = {
+ [board_vf] = &igbvf_vf_info,
+};
+
+/**
+ * igbvf_desc_unused - calculate if we have unused descriptors
+ **/
+static int igbvf_desc_unused(struct igbvf_ring *ring)
+{
+ if (ring->next_to_clean > ring->next_to_use)
+ return ring->next_to_clean - ring->next_to_use - 1;
+
+ return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+/**
+ * igbvf_receive_skb - helper function to handle Rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ **/
+static void igbvf_receive_skb(struct igbvf_adapter *adapter,
+ struct net_device *netdev,
+ struct sk_buff *skb,
+ u32 status, u16 vlan)
+{
+ if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
+ vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
+ le16_to_cpu(vlan) &
+ E1000_RXD_SPC_VLAN_MASK);
+ else
+ netif_receive_skb(skb);
+
+ netdev->last_rx = jiffies;
+}
+
+static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
+ u32 status_err, struct sk_buff *skb)
+{
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Ignore Checksum bit is set or checksum is disabled through ethtool */
+ if ((status_err & E1000_RXD_STAT_IXSM))
+ return;
+ /* TCP/UDP checksum error bit is set */
+ if (status_err &
+ (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ adapter->hw_csum_good++;
+}
+
+/**
+ * igbvf_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @rx_ring: address of ring structure to repopulate
+ * @cleaned_count: number of buffers to repopulate
+ **/
+static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring,
+ int cleaned_count)
+{
+ struct igbvf_adapter *adapter = rx_ring->adapter;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_adv_rx_desc *rx_desc;
+ struct igbvf_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ int bufsz;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ if (adapter->rx_ps_hdr_size)
+ bufsz = adapter->rx_ps_hdr_size;
+ else
+ bufsz = adapter->rx_buffer_len;
+ bufsz += NET_IP_ALIGN;
+
+ while (cleaned_count--) {
+ rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
+
+ if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) {
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (!buffer_info->page) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ buffer_info->page_offset = 0;
+ } else {
+ buffer_info->page_offset ^= PAGE_SIZE / 2;
+ }
+ buffer_info->page_dma =
+ pci_map_page(pdev, buffer_info->page,
+ buffer_info->page_offset,
+ PAGE_SIZE / 2,
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (!buffer_info->skb) {
+ skb = netdev_alloc_skb(netdev, bufsz);
+ if (!skb) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+
+ /* Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ buffer_info->skb = skb;
+ buffer_info->dma = pci_map_single(pdev, skb->data,
+ bufsz,
+ PCI_DMA_FROMDEVICE);
+ }
+ /* Refresh the desc even if buffer_addrs didn't change because
+ * each write-back erases this info. */
+ if (adapter->rx_ps_hdr_size) {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
+ } else {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->dma);
+ rx_desc->read.hdr_addr = 0;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i) {
+ rx_ring->next_to_use = i;
+ if (i == 0)
+ i = (rx_ring->count - 1);
+ else
+ i--;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ }
+}
+
+/**
+ * igbvf_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
+ int *work_done, int work_to_do)
+{
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_adv_rx_desc *rx_desc, *next_rxd;
+ struct igbvf_buffer *buffer_info, *next_buffer;
+ struct sk_buff *skb;
+ bool cleaned = false;
+ int cleaned_count = 0;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int i;
+ u32 length, hlen, staterr;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ buffer_info = &rx_ring->buffer_info[i];
+
+ /* HW will not DMA in data larger than the given buffer, even
+ * if it parses the (NFS, of course) header to be larger. In
+ * that case, it fills the header buffer and spills the rest
+ * into the page.
+ */
+ hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) &
+ E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
+ if (hlen > adapter->rx_ps_hdr_size)
+ hlen = adapter->rx_ps_hdr_size;
+
+ length = le16_to_cpu(rx_desc->wb.upper.length);
+ cleaned = true;
+ cleaned_count++;
+
+ skb = buffer_info->skb;
+ prefetch(skb->data - NET_IP_ALIGN);
+ buffer_info->skb = NULL;
+ if (!adapter->rx_ps_hdr_size) {
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
+ skb_put(skb, length);
+ goto send_up;
+ }
+
+ if (!skb_shinfo(skb)->nr_frags) {
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_ps_hdr_size + NET_IP_ALIGN,
+ PCI_DMA_FROMDEVICE);
+ skb_put(skb, hlen);
+ }
+
+ if (length) {
+ pci_unmap_page(pdev, buffer_info->page_dma,
+ PAGE_SIZE / 2,
+ PCI_DMA_FROMDEVICE);
+ buffer_info->page_dma = 0;
+
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags++,
+ buffer_info->page,
+ buffer_info->page_offset,
+ length);
+
+ if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
+ (page_count(buffer_info->page) != 1))
+ buffer_info->page = NULL;
+ else
+ get_page(buffer_info->page);
+
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+ }
+send_up:
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ next_rxd = IGBVF_RX_DESC_ADV(*rx_ring, i);
+ prefetch(next_rxd);
+ next_buffer = &rx_ring->buffer_info[i];
+
+ if (!(staterr & E1000_RXD_STAT_EOP)) {
+ buffer_info->skb = next_buffer->skb;
+ buffer_info->dma = next_buffer->dma;
+ next_buffer->skb = skb;
+ next_buffer->dma = 0;
+ goto next_desc;
+ }
+
+ if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ total_bytes += skb->len;
+ total_packets++;
+
+ igbvf_rx_checksum_adv(adapter, staterr, skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ igbvf_receive_skb(adapter, netdev, skb, staterr,
+ rx_desc->wb.upper.vlan);
+
+ netdev->last_rx = jiffies;
+
+next_desc:
+ rx_desc->wb.upper.status_error = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGBVF_RX_BUFFER_WRITE) {
+ igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ rx_ring->next_to_clean = i;
+ cleaned_count = igbvf_desc_unused(rx_ring);
+
+ if (cleaned_count)
+ igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_packets;
+ adapter->total_rx_bytes += total_bytes;
+ adapter->net_stats.rx_bytes += total_bytes;
+ adapter->net_stats.rx_packets += total_packets;
+ return cleaned;
+}
+
+static void igbvf_put_txbuf(struct igbvf_adapter *adapter,
+ struct igbvf_buffer *buffer_info)
+{
+ buffer_info->dma = 0;
+ if (buffer_info->skb) {
+ skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+}
+
+static void igbvf_print_tx_hang(struct igbvf_adapter *adapter)
+{
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ unsigned int i = tx_ring->next_to_clean;
+ unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
+ union e1000_adv_tx_desc *eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
+
+ /* detected Tx unit hang */
+ dev_err(&adapter->pdev->dev,
+ "Detected Tx Unit Hang:\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]:\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ readl(adapter->hw.hw_addr + tx_ring->head),
+ readl(adapter->hw.hw_addr + tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->wb.status);
+}
+
+/**
+ * igbvf_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igbvf_setup_tx_resources(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct igbvf_buffer) * tx_ring->count;
+ tx_ring->buffer_info = vmalloc(size);
+ if (!tx_ring->buffer_info)
+ goto err;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+ &tx_ring->dma);
+
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->adapter = adapter;
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ return 0;
+err:
+ vfree(tx_ring->buffer_info);
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igbvf_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igbvf_setup_rx_resources(struct igbvf_adapter *adapter,
+ struct igbvf_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct igbvf_buffer) * rx_ring->count;
+ rx_ring->buffer_info = vmalloc(size);
+ if (!rx_ring->buffer_info)
+ goto err;
+ memset(rx_ring->buffer_info, 0, size);
+
+ desc_len = sizeof(union e1000_adv_rx_desc);
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * desc_len;
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
+ &rx_ring->dma);
+
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ rx_ring->adapter = adapter;
+
+ return 0;
+
+err:
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igbvf_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igbvf_clean_tx_ring(struct igbvf_ring *tx_ring)
+{
+ struct igbvf_adapter *adapter = tx_ring->adapter;
+ struct igbvf_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ if (!tx_ring->buffer_info)
+ return;
+
+ /* Free all the Tx ring sk_buffs */
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ igbvf_put_txbuf(adapter, buffer_info);
+ }
+
+ size = sizeof(struct igbvf_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ writel(0, adapter->hw.hw_addr + tx_ring->head);
+ writel(0, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+/**
+ * igbvf_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: ring to free resources from
+ *
+ * Free all transmit software resources
+ **/
+void igbvf_free_tx_resources(struct igbvf_ring *tx_ring)
+{
+ struct pci_dev *pdev = tx_ring->adapter->pdev;
+
+ igbvf_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igbvf_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ **/
+static void igbvf_clean_rx_ring(struct igbvf_ring *rx_ring)
+{
+ struct igbvf_adapter *adapter = rx_ring->adapter;
+ struct igbvf_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ if (!rx_ring->buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ if (adapter->rx_ps_hdr_size){
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_ps_hdr_size,
+ PCI_DMA_FROMDEVICE);
+ } else {
+ pci_unmap_single(pdev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ PCI_DMA_FROMDEVICE);
+ }
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+
+ if (buffer_info->page) {
+ if (buffer_info->page_dma)
+ pci_unmap_page(pdev, buffer_info->page_dma,
+ PAGE_SIZE / 2,
+ PCI_DMA_FROMDEVICE);
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ buffer_info->page_dma = 0;
+ buffer_info->page_offset = 0;
+ }
+ }
+
+ size = sizeof(struct igbvf_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, adapter->hw.hw_addr + rx_ring->head);
+ writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
+/**
+ * igbvf_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+void igbvf_free_rx_resources(struct igbvf_ring *rx_ring)
+{
+ struct pci_dev *pdev = rx_ring->adapter->pdev;
+
+ igbvf_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igbvf_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput. This functionality is controlled
+ * by the InterruptThrottleRate module parameter.
+ **/
+static unsigned int igbvf_update_itr(struct igbvf_adapter *adapter,
+ u16 itr_setting, int packets,
+ int bytes)
+{
+ unsigned int retval = itr_setting;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000) {
+ retval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ retval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void igbvf_set_itr(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ adapter->tx_itr = igbvf_update_itr(adapter, adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = igbvf_update_itr(adapter, adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+ if (new_itr != adapter->itr) {
+ /*
+ * this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ adapter->rx_ring->itr_val = 1952;
+
+ if (adapter->msix_entries)
+ adapter->rx_ring->set_itr = 1;
+ else
+ ew32(ITR, 1952);
+ }
+}
+
+/**
+ * igbvf_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ * returns true if ring is completely cleaned
+ **/
+static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring)
+{
+ struct igbvf_adapter *adapter = tx_ring->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct igbvf_buffer *buffer_info;
+ struct sk_buff *skb;
+ union e1000_adv_tx_desc *tx_desc, *eop_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int i, eop, count = 0;
+ bool cleaned = false;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
+
+ while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ for (cleaned = false; !cleaned; count++) {
+ tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+ skb = buffer_info->skb;
+
+ if (skb) {
+ unsigned int segs, bytecount;
+
+ /* gso_segs is currently only valid for tcp */
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_packets += segs;
+ total_bytes += bytecount;
+ }
+
+ igbvf_put_txbuf(adapter, buffer_info);
+ tx_desc->wb.status = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+ if (unlikely(count &&
+ netif_carrier_ok(netdev) &&
+ igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__IGBVF_DOWN, &adapter->state))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[i].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+ (adapter->tx_timeout_factor * HZ))
+ && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+
+ tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
+ /* detected Tx unit hang */
+ igbvf_print_tx_hang(adapter);
+
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->net_stats.tx_bytes += total_bytes;
+ adapter->net_stats.tx_packets += total_packets;
+ return (count < tx_ring->count);
+}
+
+static irqreturn_t igbvf_msix_other(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->int_counter1++;
+
+ netif_carrier_off(netdev);
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+
+ ew32(EIMS, adapter->eims_other);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t igbvf_intr_msix_tx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+
+
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+
+ /* auto mask will automatically reenable the interrupt when we write
+ * EICS */
+ if (!igbvf_clean_tx_irq(tx_ring))
+ /* Ring was not completely cleaned, so fire another interrupt */
+ ew32(EICS, tx_ring->eims_value);
+ else
+ ew32(EIMS, tx_ring->eims_value);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t igbvf_intr_msix_rx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ adapter->int_counter0++;
+
+ /* Write the ITR value calculated at the end of the
+ * previous interrupt.
+ */
+ if (adapter->rx_ring->set_itr) {
+ writel(adapter->rx_ring->itr_val,
+ adapter->hw.hw_addr + adapter->rx_ring->itr_register);
+ adapter->rx_ring->set_itr = 0;
+ }
+
+ if (napi_schedule_prep(&adapter->rx_ring->napi)) {
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->rx_ring->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+#define IGBVF_NO_QUEUE -1
+
+static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue,
+ int tx_queue, int msix_vector)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ivar, index;
+
+ /* 82576 uses a table-based method for assigning vectors.
+ Each queue has a single entry in the table to which we write
+ a vector number along with a "valid" bit. Sadly, the layout
+ of the table is somewhat counterintuitive. */
+ if (rx_queue > IGBVF_NO_QUEUE) {
+ index = (rx_queue >> 1);
+ ivar = array_er32(IVAR0, index);
+ if (rx_queue & 0x1) {
+ /* vector goes into third byte of register */
+ ivar = ivar & 0xFF00FFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+ } else {
+ /* vector goes into low byte of register */
+ ivar = ivar & 0xFFFFFF00;
+ ivar |= msix_vector | E1000_IVAR_VALID;
+ }
+ adapter->rx_ring[rx_queue].eims_value = 1 << msix_vector;
+ array_ew32(IVAR0, index, ivar);
+ }
+ if (tx_queue > IGBVF_NO_QUEUE) {
+ index = (tx_queue >> 1);
+ ivar = array_er32(IVAR0, index);
+ if (tx_queue & 0x1) {
+ /* vector goes into high byte of register */
+ ivar = ivar & 0x00FFFFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+ } else {
+ /* vector goes into second byte of register */
+ ivar = ivar & 0xFFFF00FF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+ }
+ adapter->tx_ring[tx_queue].eims_value = 1 << msix_vector;
+ array_ew32(IVAR0, index, ivar);
+ }
+}
+
+/**
+ * igbvf_configure_msix - Configure MSI-X hardware
+ *
+ * igbvf_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igbvf_configure_msix(struct igbvf_adapter *adapter)
+{
+ u32 tmp;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+ int vector = 0;
+
+ adapter->eims_enable_mask = 0;
+
+ igbvf_assign_vector(adapter, IGBVF_NO_QUEUE, 0, vector++);
+ adapter->eims_enable_mask |= tx_ring->eims_value;
+ if (tx_ring->itr_val)
+ writel(tx_ring->itr_val,
+ hw->hw_addr + tx_ring->itr_register);
+ else
+ writel(1952, hw->hw_addr + tx_ring->itr_register);
+
+ igbvf_assign_vector(adapter, 0, IGBVF_NO_QUEUE, vector++);
+ adapter->eims_enable_mask |= rx_ring->eims_value;
+ if (rx_ring->itr_val)
+ writel(rx_ring->itr_val,
+ hw->hw_addr + rx_ring->itr_register);
+ else
+ writel(1952, hw->hw_addr + rx_ring->itr_register);
+
+ /* set vector for other causes, i.e. link changes */
+
+ tmp = (vector++ | E1000_IVAR_VALID);
+
+ ew32(IVAR_MISC, tmp);
+
+ adapter->eims_enable_mask = (1 << (vector)) - 1;
+ adapter->eims_other = 1 << (vector - 1);
+ e1e_flush();
+}
+
+static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ }
+}
+
+/**
+ * igbvf_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
+{
+ int err = -ENOMEM;
+ int i;
+
+ /* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */
+ adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (adapter->msix_entries) {
+ for (i = 0; i < 3; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries, 3);
+ }
+
+ if (err) {
+ /* MSI-X failed */
+ dev_err(&adapter->pdev->dev,
+ "Failed to initialize MSI-X interrupts.\n");
+ igbvf_reset_interrupt_capability(adapter);
+ }
+}
+
+/**
+ * igbvf_request_msix - Initialize MSI-X interrupts
+ *
+ * igbvf_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igbvf_request_msix(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err = 0, vector = 0;
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5)) {
+ sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
+ sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
+ } else {
+ memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
+ memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
+ }
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+
+ adapter->tx_ring->itr_register = E1000_EITR(vector);
+ adapter->tx_ring->itr_val = 1952;
+ vector++;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+
+ adapter->rx_ring->itr_register = E1000_EITR(vector);
+ adapter->rx_ring->itr_val = 1952;
+ vector++;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &igbvf_msix_other, 0, netdev->name, netdev);
+ if (err)
+ goto out;
+
+ igbvf_configure_msix(adapter);
+ return 0;
+out:
+ return err;
+}
+
+/**
+ * igbvf_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ **/
+static int __devinit igbvf_alloc_queues(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ adapter->tx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ netif_napi_add(netdev, &adapter->rx_ring->napi, igbvf_poll, 64);
+
+ return 0;
+}
+
+/**
+ * igbvf_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igbvf_request_irq(struct igbvf_adapter *adapter)
+{
+ int err = -1;
+
+ /* igbvf supports msi-x only */
+ if (adapter->msix_entries)
+ err = igbvf_request_msix(adapter);
+
+ if (!err)
+ return err;
+
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate interrupt, Error: %d\n", err);
+
+ return err;
+}
+
+static void igbvf_free_irq(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int vector;
+
+ if (adapter->msix_entries) {
+ for (vector = 0; vector < 3; vector++)
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ }
+}
+
+/**
+ * igbvf_irq_disable - Mask off interrupt generation on the NIC
+ **/
+static void igbvf_irq_disable(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(EIMC, ~0);
+
+ if (adapter->msix_entries)
+ ew32(EIAC, 0);
+}
+
+/**
+ * igbvf_irq_enable - Enable default interrupt generation settings
+ **/
+static void igbvf_irq_enable(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(EIAC, adapter->eims_enable_mask);
+ ew32(EIAM, adapter->eims_enable_mask);
+ ew32(EIMS, adapter->eims_enable_mask);
+}
+
+/**
+ * igbvf_poll - NAPI Rx polling callback
+ * @napi: struct associated with this polling callback
+ * @budget: amount of packets driver is allowed to process this poll
+ **/
+static int igbvf_poll(struct napi_struct *napi, int budget)
+{
+ struct igbvf_ring *rx_ring = container_of(napi, struct igbvf_ring, napi);
+ struct igbvf_adapter *adapter = rx_ring->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ int work_done = 0;
+
+ igbvf_clean_rx_irq(adapter, &work_done, budget);
+
+ /* If not enough Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+
+ if (adapter->itr_setting & 3)
+ igbvf_set_itr(adapter);
+
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ ew32(EIMS, adapter->rx_ring->eims_value);
+ }
+
+ return work_done;
+}
+
+/**
+ * igbvf_set_rlpml - set receive large packet maximum length
+ * @adapter: board private structure
+ *
+ * Configure the maximum size of packets that will be received
+ */
+static void igbvf_set_rlpml(struct igbvf_adapter *adapter)
+{
+ int max_frame_size = adapter->max_frame_size;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->vlgrp)
+ max_frame_size += VLAN_TAG_SIZE;
+
+ e1000_rlpml_set_vf(hw, max_frame_size);
+}
+
+static void igbvf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac.ops.set_vfta(hw, vid, true))
+ dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid);
+}
+
+static void igbvf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ igbvf_irq_disable(adapter);
+ vlan_group_set_device(adapter->vlgrp, vid, NULL);
+
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ igbvf_irq_enable(adapter);
+
+ if (hw->mac.ops.set_vfta(hw, vid, false))
+ dev_err(&adapter->pdev->dev,
+ "Failed to remove vlan id %d\n", vid);
+}
+
+static void igbvf_vlan_rx_register(struct net_device *netdev,
+ struct vlan_group *grp)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ adapter->vlgrp = grp;
+}
+
+static void igbvf_restore_vlan(struct igbvf_adapter *adapter)
+{
+ u16 vid;
+
+ if (!adapter->vlgrp)
+ return;
+
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (!vlan_group_get_device(adapter->vlgrp, vid))
+ continue;
+ igbvf_vlan_rx_add_vid(adapter->netdev, vid);
+ }
+
+ igbvf_set_rlpml(adapter);
+}
+
+/**
+ * igbvf_configure_tx - Configure Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igbvf_configure_tx(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ u64 tdba;
+ u32 txdctl, dca_txctrl;
+
+ /* disable transmits */
+ txdctl = er32(TXDCTL(0));
+ ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+ msleep(10);
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc));
+ tdba = tx_ring->dma;
+ ew32(TDBAL(0), (tdba & DMA_32BIT_MASK));
+ ew32(TDBAH(0), (tdba >> 32));
+ ew32(TDH(0), 0);
+ ew32(TDT(0), 0);
+ tx_ring->head = E1000_TDH(0);
+ tx_ring->tail = E1000_TDT(0);
+
+ /* Turn off Relaxed Ordering on head write-backs. The writebacks
+ * MUST be delivered in order or it will completely screw up
+ * our bookeeping.
+ */
+ dca_txctrl = er32(DCA_TXCTRL(0));
+ dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
+ ew32(DCA_TXCTRL(0), dca_txctrl);
+
+ /* enable transmits */
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ ew32(TXDCTL(0), txdctl);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS;
+
+ /* enable Report Status bit */
+ adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS;
+
+ adapter->tx_queue_len = adapter->netdev->tx_queue_len;
+}
+
+/**
+ * igbvf_setup_srrctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void igbvf_setup_srrctl(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 srrctl = 0;
+
+ srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK |
+ E1000_SRRCTL_BSIZEHDR_MASK |
+ E1000_SRRCTL_BSIZEPKT_MASK);
+
+ /* Enable queue drop to avoid head of line blocking */
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ /* Setup buffer sizes */
+ srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >>
+ E1000_SRRCTL_BSIZEPKT_SHIFT;
+
+ if (adapter->rx_buffer_len < 2048) {
+ adapter->rx_ps_hdr_size = 0;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ } else {
+ adapter->rx_ps_hdr_size = 128;
+ srrctl |= adapter->rx_ps_hdr_size <<
+ E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ }
+
+ ew32(SRRCTL(0), srrctl);
+}
+
+/**
+ * igbvf_configure_rx - Configure Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igbvf_configure_rx(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+ u64 rdba;
+ u32 rdlen, rxdctl;
+
+ /* disable receives */
+ rxdctl = er32(RXDCTL(0));
+ ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+ msleep(10);
+
+ rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);
+
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ rdba = rx_ring->dma;
+ ew32(RDBAL(0), (rdba & DMA_32BIT_MASK));
+ ew32(RDBAH(0), (rdba >> 32));
+ ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc));
+ rx_ring->head = E1000_RDH(0);
+ rx_ring->tail = E1000_RDT(0);
+ ew32(RDH(0), 0);
+ ew32(RDT(0), 0);
+
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ rxdctl &= 0xFFF00000;
+ rxdctl |= IGBVF_RX_PTHRESH;
+ rxdctl |= IGBVF_RX_HTHRESH << 8;
+ rxdctl |= IGBVF_RX_WTHRESH << 16;
+
+ igbvf_set_rlpml(adapter);
+
+ /* enable receives */
+ ew32(RXDCTL(0), rxdctl);
+}
+
+/**
+ * igbvf_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igbvf_set_multi(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct dev_mc_list *mc_ptr;
+ u8 *mta_list = NULL;
+ int i;
+
+ if (netdev->mc_count) {
+ mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC);
+ if (!mta_list) {
+ dev_err(&adapter->pdev->dev,
+ "failed to allocate multicast filter list\n");
+ return;
+ }
+ }
+
+ /* prepare a packed array of only addresses. */
+ mc_ptr = netdev->mc_list;
+
+ for (i = 0; i < netdev->mc_count; i++) {
+ if (!mc_ptr)
+ break;
+ memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr,
+ ETH_ALEN);
+ mc_ptr = mc_ptr->next;
+ }
+
+ hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0);
+ kfree(mta_list);
+}
+
+/**
+ * igbvf_configure - configure the hardware for Rx and Tx
+ * @adapter: private board structure
+ **/
+static void igbvf_configure(struct igbvf_adapter *adapter)
+{
+ igbvf_set_multi(adapter->netdev);
+
+ igbvf_restore_vlan(adapter);
+
+ igbvf_configure_tx(adapter);
+ igbvf_setup_srrctl(adapter);
+ igbvf_configure_rx(adapter);
+ igbvf_alloc_rx_buffers(adapter->rx_ring,
+ igbvf_desc_unused(adapter->rx_ring));
+}
+
+/* igbvf_reset - bring the hardware into a known good state
+ *
+ * This function boots the hardware and enables some settings that
+ * require a configuration cycle of the hardware - those cannot be
+ * set/changed during runtime. After reset the device needs to be
+ * properly configured for Rx, Tx etc.
+ */
+static void igbvf_reset(struct igbvf_adapter *adapter)
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Allow time for pending master requests to run */
+ if (mac->ops.reset_hw(hw))
+ dev_err(&adapter->pdev->dev, "PF still resetting\n");
+
+ mac->ops.init_hw(hw);
+
+ if (is_valid_ether_addr(adapter->hw.mac.addr)) {
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr,
+ netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr,
+ netdev->addr_len);
+ }
+}
+
+int igbvf_up(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ igbvf_configure(adapter);
+
+ clear_bit(__IGBVF_DOWN, &adapter->state);
+
+ napi_enable(&adapter->rx_ring->napi);
+ if (adapter->msix_entries)
+ igbvf_configure_msix(adapter);
+
+ /* Clear any pending interrupts. */
+ er32(EICR);
+ igbvf_irq_enable(adapter);
+
+ /* start the watchdog */
+ hw->mac.get_link_status = 1;
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+
+
+ return 0;
+}
+
+void igbvf_down(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxdctl, txdctl;
+
+ /*
+ * signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
+ set_bit(__IGBVF_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rxdctl = er32(RXDCTL(0));
+ ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+
+ netif_stop_queue(netdev);
+
+ /* disable transmits in the hardware */
+ txdctl = er32(TXDCTL(0));
+ ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+
+ /* flush both disables and wait for them to finish */
+ e1e_flush();
+ msleep(10);
+
+ napi_disable(&adapter->rx_ring->napi);
+
+ igbvf_irq_disable(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ netif_carrier_off(netdev);
+
+ /* record the stats before reset*/
+ igbvf_update_stats(adapter);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ igbvf_reset(adapter);
+ igbvf_clean_tx_ring(adapter->tx_ring);
+ igbvf_clean_rx_ring(adapter->rx_ring);
+}
+
+void igbvf_reinit_locked(struct igbvf_adapter *adapter)
+{
+ might_sleep();
+ while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
+ msleep(1);
+ igbvf_down(adapter);
+ igbvf_up(adapter);
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
+}
+
+/**
+ * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igbvf_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit igbvf_sw_init(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ s32 rc;
+
+ adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
+ adapter->rx_ps_hdr_size = 0;
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ adapter->tx_int_delay = 8;
+ adapter->tx_abs_int_delay = 32;
+ adapter->rx_int_delay = 0;
+ adapter->rx_abs_int_delay = 8;
+ adapter->itr_setting = 3;
+ adapter->itr = 20000;
+
+ /* Set various function pointers */
+ adapter->ei->init_ops(&adapter->hw);
+
+ rc = adapter->hw.mac.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+ rc = adapter->hw.mbx.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+ igbvf_set_interrupt_capability(adapter);
+
+ if (igbvf_alloc_queues(adapter))
+ return -ENOMEM;
+
+ spin_lock_init(&adapter->tx_queue_lock);
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igbvf_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__IGBVF_DOWN, &adapter->state);
+ return 0;
+}
+
+static void igbvf_initialize_last_counter_stats(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->stats.last_gprc = er32(VFGPRC);
+ adapter->stats.last_gorc = er32(VFGORC);
+ adapter->stats.last_gptc = er32(VFGPTC);
+ adapter->stats.last_gotc = er32(VFGOTC);
+ adapter->stats.last_mprc = er32(VFMPRC);
+ adapter->stats.last_gotlbc = er32(VFGOTLBC);
+ adapter->stats.last_gptlbc = er32(VFGPTLBC);
+ adapter->stats.last_gorlbc = er32(VFGORLBC);
+ adapter->stats.last_gprlbc = er32(VFGPRLBC);
+
+ adapter->stats.base_gprc = er32(VFGPRC);
+ adapter->stats.base_gorc = er32(VFGORC);
+ adapter->stats.base_gptc = er32(VFGPTC);
+ adapter->stats.base_gotc = er32(VFGOTC);
+ adapter->stats.base_mprc = er32(VFMPRC);
+ adapter->stats.base_gotlbc = er32(VFGOTLBC);
+ adapter->stats.base_gptlbc = er32(VFGPTLBC);
+ adapter->stats.base_gorlbc = er32(VFGORLBC);
+ adapter->stats.base_gprlbc = er32(VFGPRLBC);
+}
+
+/**
+ * igbvf_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int igbvf_open(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__IGBVF_TESTING, &adapter->state))
+ return -EBUSY;
+
+ /* allocate transmit descriptors */
+ err = igbvf_setup_tx_resources(adapter, adapter->tx_ring);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igbvf_setup_rx_resources(adapter, adapter->rx_ring);
+ if (err)
+ goto err_setup_rx;
+
+ /*
+ * before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so.
+ */
+ igbvf_configure(adapter);
+
+ err = igbvf_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as igbvf_up() */
+ clear_bit(__IGBVF_DOWN, &adapter->state);
+
+ napi_enable(&adapter->rx_ring->napi);
+
+ /* clear any pending interrupts */
+ er32(EICR);
+
+ igbvf_irq_enable(adapter);
+
+ /* start the watchdog */
+ hw->mac.get_link_status = 1;
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+
+ return 0;
+
+err_req_irq:
+ igbvf_free_rx_resources(adapter->rx_ring);
+err_setup_rx:
+ igbvf_free_tx_resources(adapter->tx_ring);
+err_setup_tx:
+ igbvf_reset(adapter);
+
+ return err;
+}
+
+/**
+ * igbvf_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int igbvf_close(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
+ igbvf_down(adapter);
+
+ igbvf_free_irq(adapter);
+
+ igbvf_free_tx_resources(adapter->tx_ring);
+ igbvf_free_rx_resources(adapter->rx_ring);
+
+ return 0;
+}
+/**
+ * igbvf_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igbvf_set_mac(struct net_device *netdev, void *p)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ if (memcmp(addr->sa_data, hw->mac.addr, 6))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ return 0;
+}
+
+#define UPDATE_VF_COUNTER(reg, name) \
+ { \
+ u32 current_counter = er32(reg); \
+ if (current_counter < adapter->stats.last_##name) \
+ adapter->stats.name += 0x100000000LL; \
+ adapter->stats.last_##name = current_counter; \
+ adapter->stats.name &= 0xFFFFFFFF00000000LL; \
+ adapter->stats.name |= current_counter; \
+ }
+
+/**
+ * igbvf_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+**/
+void igbvf_update_stats(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /*
+ * Prevent stats update while adapter is being reset, link is down
+ * or if the pci connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+
+ if (test_bit(__IGBVF_RESETTING, &adapter->state))
+ return;
+
+ if (pci_channel_offline(pdev))
+ return;
+
+ UPDATE_VF_COUNTER(VFGPRC, gprc);
+ UPDATE_VF_COUNTER(VFGORC, gorc);
+ UPDATE_VF_COUNTER(VFGPTC, gptc);
+ UPDATE_VF_COUNTER(VFGOTC, gotc);
+ UPDATE_VF_COUNTER(VFMPRC, mprc);
+ UPDATE_VF_COUNTER(VFGOTLBC, gotlbc);
+ UPDATE_VF_COUNTER(VFGPTLBC, gptlbc);
+ UPDATE_VF_COUNTER(VFGORLBC, gorlbc);
+ UPDATE_VF_COUNTER(VFGPRLBC, gprlbc);
+
+ /* Fill out the OS statistics structure */
+ adapter->net_stats.multicast = adapter->stats.mprc;
+}
+
+static void igbvf_print_link_info(struct igbvf_adapter *adapter)
+{
+ dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n",
+ adapter->link_speed,
+ ((adapter->link_duplex == FULL_DUPLEX) ?
+ "Full Duplex" : "Half Duplex"));
+}
+
+static bool igbvf_has_link(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val = E1000_SUCCESS;
+ bool link_active;
+
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+
+ /* if check for link returns error we will need to reset */
+ if (ret_val)
+ schedule_work(&adapter->reset_task);
+
+ return link_active;
+}
+
+/**
+ * igbvf_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igbvf_watchdog(unsigned long data)
+{
+ struct igbvf_adapter *adapter = (struct igbvf_adapter *) data;
+
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igbvf_watchdog_task(struct work_struct *work)
+{
+ struct igbvf_adapter *adapter = container_of(work,
+ struct igbvf_adapter,
+ watchdog_task);
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 link;
+ int tx_pending = 0;
+
+ link = igbvf_has_link(adapter);
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ bool txb2b = 1;
+
+ mac->ops.get_link_up_info(&adapter->hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+ igbvf_print_link_info(adapter);
+
+ /*
+ * tweak tx_queue_len according to speed/duplex
+ * and adjust the timeout factor
+ */
+ netdev->tx_queue_len = adapter->tx_queue_len;
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = 0;
+ netdev->tx_queue_len = 10;
+ adapter->tx_timeout_factor = 16;
+ break;
+ case SPEED_100:
+ txb2b = 0;
+ netdev->tx_queue_len = 100;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ dev_info(&adapter->pdev->dev, "Link is Down\n");
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ }
+ }
+
+ if (netif_carrier_ok(netdev)) {
+ igbvf_update_stats(adapter);
+ } else {
+ tx_pending = (igbvf_desc_unused(tx_ring) + 1 <
+ tx_ring->count);
+ if (tx_pending) {
+ /*
+ * We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ }
+ }
+
+ /* Cause software interrupt to ensure Rx ring is cleaned */
+ ew32(EICS, adapter->rx_ring->eims_value);
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = 1;
+
+ /* Reset the timer */
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + (2 * HZ)));
+}
+
+#define IGBVF_TX_FLAGS_CSUM 0x00000001
+#define IGBVF_TX_FLAGS_VLAN 0x00000002
+#define IGBVF_TX_FLAGS_TSO 0x00000004
+#define IGBVF_TX_FLAGS_IPV4 0x00000008
+#define IGBVF_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGBVF_TX_FLAGS_VLAN_SHIFT 16
+
+static int igbvf_tso(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ int err;
+ struct igbvf_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+ u32 mss_l4len_idx, l4len;
+ *hdr_len = 0;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err) {
+ dev_err(&adapter->pdev->dev,
+ "igbvf_tso returning an error\n");
+ return err;
+ }
+ }
+
+ l4len = tcp_hdrlen(skb);
+ *hdr_len += l4len;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ }
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
+ /* VLAN MACLEN IPLEN */
+ if (tx_flags & IGBVF_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ *hdr_len += skb_network_offset(skb);
+ info |= (skb_transport_header(skb) - skb_network_header(skb));
+ *hdr_len += (skb_transport_header(skb) - skb_network_header(skb));
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
+ mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
+
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+ context_desc->seqnum_seed = 0;
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = 0;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ struct igbvf_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+
+ if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
+ (tx_flags & IGBVF_TX_FLAGS_VLAN)) {
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
+
+ if (tx_flags & IGBVF_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
+
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ info |= (skb_transport_header(skb) -
+ skb_network_header(skb));
+
+
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_IP):
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ break;
+ case __constant_htons(ETH_P_IPV6):
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ break;
+ default:
+ break;
+ }
+ }
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+ context_desc->seqnum_seed = 0;
+ context_desc->mss_l4len_idx = 0;
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = 0;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+
+ return false;
+}
+
+static int igbvf_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ /* there is enough descriptors then we don't need to worry */
+ if (igbvf_desc_unused(adapter->tx_ring) >= size)
+ return 0;
+
+ netif_stop_queue(netdev);
+
+ smp_mb();
+
+ /* We need to check again just in case room has been made available */
+ if (igbvf_desc_unused(adapter->tx_ring) < size)
+ return -EBUSY;
+
+ netif_wake_queue(netdev);
+
+ ++adapter->restart_queue;
+ return 0;
+}
+
+#define IGBVF_MAX_TXD_PWR 16
+#define IGBVF_MAX_DATA_PER_TXD (1 << IGBVF_MAX_TXD_PWR)
+
+static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ struct sk_buff *skb,
+ unsigned int first)
+{
+ struct igbvf_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int count = 0, i;
+ unsigned int f;
+ dma_addr_t *map;
+
+ i = tx_ring->next_to_use;
+
+ if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
+ dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
+ return 0;
+ }
+
+ map = skb_shinfo(skb)->dma_maps;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = map[count];
+ count++;
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = map[count];
+ count++;
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+}
+
+static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ int tx_flags, int count, u32 paylen,
+ u8 hdr_len)
+{
+ union e1000_adv_tx_desc *tx_desc = NULL;
+ struct igbvf_buffer *buffer_info;
+ u32 olinfo_status = 0, cmd_type_len;
+ unsigned int i;
+
+ cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
+ E1000_ADVTXD_DCMD_DEXT);
+
+ if (tx_flags & IGBVF_TX_FLAGS_VLAN)
+ cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
+
+ if (tx_flags & IGBVF_TX_FLAGS_TSO) {
+ cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
+
+ /* insert tcp checksum */
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+
+ /* insert ip checksum */
+ if (tx_flags & IGBVF_TX_FLAGS_IPV4)
+ olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
+
+ } else if (tx_flags & IGBVF_TX_FLAGS_CSUM) {
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
+
+ i = tx_ring->next_to_use;
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
+ tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type_len | buffer_info->length);
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+static int igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
+ struct net_device *netdev,
+ struct igbvf_ring *tx_ring)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ unsigned int first, tx_flags = 0;
+ u8 hdr_len = 0;
+ int count = 0;
+ int tso = 0;
+
+ if (test_bit(__IGBVF_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /*
+ * need: count + 4 desc gap to keep tail from touching
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for skb->data,
+ * + 1 desc for context descriptor,
+ * head, otherwise try next time
+ */
+ if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) {
+ /* this is a hard error */
+ return NETDEV_TX_BUSY;
+ }
+
+ if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
+ tx_flags |= IGBVF_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tx_flags |= IGBVF_TX_FLAGS_IPV4;
+
+ first = tx_ring->next_to_use;
+
+ tso = skb_is_gso(skb) ?
+ igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0;
+ if (unlikely(tso < 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (tso)
+ tx_flags |= IGBVF_TX_FLAGS_TSO;
+ else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL))
+ tx_flags |= IGBVF_TX_FLAGS_CSUM;
+
+ /*
+ * count reflects descriptors mapped, if 0 then mapping error
+ * has occured and we need to rewind the descriptor queue
+ */
+ count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);
+
+ if (count) {
+ igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count,
+ skb->len, hdr_len);
+ netdev->trans_start = jiffies;
+ /* Make sure there is space in the ring for the next send. */
+ igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4);
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int igbvf_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct igbvf_ring *tx_ring;
+ int retval;
+
+ if (test_bit(__IGBVF_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ tx_ring = &adapter->tx_ring[0];
+
+ retval = igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring);
+
+ return retval;
+}
+
+/**
+ * igbvf_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igbvf_tx_timeout(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void igbvf_reset_task(struct work_struct *work)
+{
+ struct igbvf_adapter *adapter;
+ adapter = container_of(work, struct igbvf_adapter, reset_task);
+
+ igbvf_reinit_locked(adapter);
+}
+
+/**
+ * igbvf_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+static struct net_device_stats *igbvf_get_stats(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+}
+
+/**
+ * igbvf_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igbvf_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Jumbo frame size limits */
+ if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ dev_err(&adapter->pdev->dev,
+ "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ }
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
+ msleep(1);
+ /* igbvf_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ igbvf_down(adapter);
+
+ /*
+ * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * However with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs
+ */
+
+ if (max_frame <= 1024)
+ adapter->rx_buffer_len = 1024;
+ else if (max_frame <= 2048)
+ adapter->rx_buffer_len = 2048;
+ else
+#if (PAGE_SIZE / 2) > 16384
+ adapter->rx_buffer_len = 16384;
+#else
+ adapter->rx_buffer_len = PAGE_SIZE / 2;
+#endif
+
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
+ (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
+ adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN +
+ ETH_FCS_LEN;
+
+ dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ igbvf_up(adapter);
+ else
+ igbvf_reset(adapter);
+
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+static int igbvf_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int igbvf_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
+ igbvf_down(adapter);
+ igbvf_free_irq(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int igbvf_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ u32 err;
+
+ pci_restore_state(pdev);
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ if (netif_running(netdev)) {
+ err = igbvf_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ igbvf_reset(adapter);
+
+ if (netif_running(netdev))
+ igbvf_up(adapter);
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void igbvf_shutdown(struct pci_dev *pdev)
+{
+ igbvf_suspend(pdev, PMSG_SUSPEND);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igbvf_netpoll(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+
+ igbvf_clean_tx_irq(adapter->tx_ring);
+
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * igbvf_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ igbvf_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igbvf_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igbvf_resume routine.
+ */
+static pci_ers_result_t igbvf_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ igbvf_reset(adapter);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * igbvf_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igbvf_resume routine.
+ */
+static void igbvf_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (igbvf_up(adapter)) {
+ dev_err(&pdev->dev,
+ "can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+static void igbvf_print_device_info(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n");
+ dev_info(&pdev->dev, "Address: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ /* MAC address */
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+ dev_info(&pdev->dev, "MAC: %d\n", hw->mac.type);
+}
+
+static const struct net_device_ops igbvf_netdev_ops = {
+ .ndo_open = igbvf_open,
+ .ndo_stop = igbvf_close,
+ .ndo_start_xmit = igbvf_xmit_frame,
+ .ndo_get_stats = igbvf_get_stats,
+ .ndo_set_multicast_list = igbvf_set_multi,
+ .ndo_set_mac_address = igbvf_set_mac,
+ .ndo_change_mtu = igbvf_change_mtu,
+ .ndo_do_ioctl = igbvf_ioctl,
+ .ndo_tx_timeout = igbvf_tx_timeout,
+ .ndo_vlan_rx_register = igbvf_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = igbvf_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igbvf_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = igbvf_netpoll,
+#endif
+};
+
+/**
+ * igbvf_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igbvf_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igbvf_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit igbvf_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igbvf_adapter *adapter;
+ struct e1000_hw *hw;
+ const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data];
+
+ static int cards_found;
+ int err, pci_using_dac;
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ if (!err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (!err)
+ pci_using_dac = 1;
+ } else {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA "
+ "configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ }
+
+ err = pci_request_regions(pdev, igbvf_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct igbvf_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ hw = &adapter->hw;
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->ei = ei;
+ adapter->pba = ei->pba;
+ adapter->flags = ei->flags;
+ adapter->hw.back = adapter;
+ adapter->hw.mac.type = ei->mac;
+ adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+
+ err = -EIO;
+ adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (!adapter->hw.hw_addr)
+ goto err_ioremap;
+
+ if (ei->get_variants) {
+ err = ei->get_variants(adapter);
+ if (err)
+ goto err_ioremap;
+ }
+
+ /* setup adapter struct */
+ err = igbvf_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ /* construct the net_device struct */
+ netdev->netdev_ops = &igbvf_netdev_ops;
+
+ igbvf_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found++;
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ netdev->features |= NETIF_F_IPV6_CSUM;
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ /*reset the controller to put the device in a known good state */
+ err = hw->mac.ops.reset_hw(hw);
+ if (err) {
+ dev_info(&pdev->dev,
+ "PF still in reset state, assigning new address\n");
+ random_ether_addr(hw->mac.addr);
+ } else {
+ err = hw->mac.ops.read_mac_addr(hw);
+ if (err) {
+ dev_err(&pdev->dev, "Error reading MAC address\n");
+ goto err_hw_init;
+ }
+ }
+
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address: "
+ "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ netdev->dev_addr[0], netdev->dev_addr[1],
+ netdev->dev_addr[2], netdev->dev_addr[3],
+ netdev->dev_addr[4], netdev->dev_addr[5]);
+ err = -EIO;
+ goto err_hw_init;
+ }
+
+ setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->reset_task, igbvf_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task);
+
+ /* ring size defaults */
+ adapter->rx_ring->count = 1024;
+ adapter->tx_ring->count = 1024;
+
+ /* reset the hardware with the new settings */
+ igbvf_reset(adapter);
+
+ /* tell the stack to leave us alone until igbvf_open() is called */
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_hw_init;
+
+ igbvf_print_device_info(adapter);
+
+ igbvf_initialize_last_counter_stats(adapter);
+
+ return 0;
+
+err_hw_init:
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ igbvf_reset_interrupt_capability(adapter);
+ iounmap(adapter->hw.hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * igbvf_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igbvf_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit igbvf_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * flush_scheduled work may reschedule our watchdog task, so
+ * explicitly disable watchdog tasks from being rescheduled
+ */
+ set_bit(__IGBVF_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+
+ flush_scheduled_work();
+
+ unregister_netdev(netdev);
+
+ igbvf_reset_interrupt_capability(adapter);
+
+ /*
+ * it is important to delete the napi struct prior to freeing the
+ * rx ring so that you do not end up with null pointer refs
+ */
+ netif_napi_del(&adapter->rx_ring->napi);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_regions(pdev);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/* PCI Error Recovery (ERS) */
+static struct pci_error_handlers igbvf_err_handler = {
+ .error_detected = igbvf_io_error_detected,
+ .slot_reset = igbvf_io_slot_reset,
+ .resume = igbvf_io_resume,
+};
+
+static struct pci_device_id igbvf_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl);
+
+/* PCI Device API Driver */
+static struct pci_driver igbvf_driver = {
+ .name = igbvf_driver_name,
+ .id_table = igbvf_pci_tbl,
+ .probe = igbvf_probe,
+ .remove = __devexit_p(igbvf_remove),
+#ifdef CONFIG_PM
+ /* Power Management Hooks */
+ .suspend = igbvf_suspend,
+ .resume = igbvf_resume,
+#endif
+ .shutdown = igbvf_shutdown,
+ .err_handler = &igbvf_err_handler
+};
+
+/**
+ * igbvf_init_module - Driver Registration Routine
+ *
+ * igbvf_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igbvf_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ igbvf_driver_string, igbvf_driver_version);
+ printk(KERN_INFO "%s\n", igbvf_copyright);
+
+ ret = pci_register_driver(&igbvf_driver);
+ pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, igbvf_driver_name,
+ PM_QOS_DEFAULT_VALUE);
+
+ return ret;
+}
+module_init(igbvf_init_module);
+
+/**
+ * igbvf_exit_module - Driver Exit Cleanup Routine
+ *
+ * igbvf_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igbvf_exit_module(void)
+{
+ pci_unregister_driver(&igbvf_driver);
+ pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, igbvf_driver_name);
+}
+module_exit(igbvf_exit_module);
+
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) 82576 Virtual Function Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+/* netdev.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
+ (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
+ (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
+ (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
+ (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
+ (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
+ (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
+ (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
+ (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
+ (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
+ (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
+ (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
+ (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
+ (0x0E028 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+
+/* Statistics registers */
+#define E1000_VFGPRC 0x00F10
+#define E1000_VFGORC 0x00F18
+#define E1000_VFMPRC 0x00F3C
+#define E1000_VFGPTC 0x00F14
+#define E1000_VFGOTC 0x00F34
+#define E1000_VFGOTLBC 0x00F50
+#define E1000_VFGPTLBC 0x00F44
+#define E1000_VFGORLBC 0x00F48
+#define E1000_VFGPRLBC 0x00F40
+
+/* These act per VF so an array friendly macro is used */
+#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+
+/* Define macros for handling registers */
+#define er32(reg) readl(hw->hw_addr + E1000_##reg)
+#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
+#define array_er32(reg, offset) \
+ readl(hw->hw_addr + E1000_##reg + (offset << 2))
+#define array_ew32(reg, offset, val) \
+ writel((val), hw->hw_addr + E1000_##reg + (offset << 2))
+#define e1e_flush() er32(STATUS)
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include "vf.h"
+
+static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
+static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+static s32 e1000_init_hw_vf(struct e1000_hw *hw);
+static s32 e1000_reset_hw_vf(struct e1000_hw *hw);
+
+static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *,
+ u32, u32, u32);
+static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32);
+static s32 e1000_read_mac_addr_vf(struct e1000_hw *);
+static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool);
+
+/**
+ * e1000_init_mac_params_vf - Inits MAC params
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_vf(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ /* VF's have no MTA Registers - PF feature only */
+ mac->mta_reg_count = 128;
+ /* VF's have no access to RAR entries */
+ mac->rar_entry_count = 1;
+
+ /* Function pointers */
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_vf;
+ /* hw initialization */
+ mac->ops.init_hw = e1000_init_hw_vf;
+ /* check for link */
+ mac->ops.check_for_link = e1000_check_for_link_vf;
+ /* link info */
+ mac->ops.get_link_up_info = e1000_get_link_up_info_vf;
+ /* multicast address update */
+ mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf;
+ /* set mac address */
+ mac->ops.rar_set = e1000_rar_set_vf;
+ /* read mac address */
+ mac->ops.read_mac_addr = e1000_read_mac_addr_vf;
+ /* set vlan filter table array */
+ mac->ops.set_vfta = e1000_set_vfta_vf;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_function_pointers_vf - Inits function pointers
+ * @hw: pointer to the HW structure
+ **/
+void e1000_init_function_pointers_vf(struct e1000_hw *hw)
+{
+ hw->mac.ops.init_params = e1000_init_mac_params_vf;
+ hw->mbx.ops.init_params = e1000_init_mbx_params_vf;
+}
+
+/**
+ * e1000_get_link_up_info_vf - Gets link info.
+ * @hw: pointer to the HW structure
+ * @speed: pointer to 16 bit value to store link speed.
+ * @duplex: pointer to 16 bit value to store duplex.
+ *
+ * Since we cannot read the PHY and get accurate link info, we must rely upon
+ * the status register's data which is often stale and inaccurate.
+ **/
+static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 status;
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000)
+ *speed = SPEED_1000;
+ else if (status & E1000_STATUS_SPEED_100)
+ *speed = SPEED_100;
+ else
+ *speed = SPEED_10;
+
+ if (status & E1000_STATUS_FD)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_reset_hw_vf - Resets the HW
+ * @hw: pointer to the HW structure
+ *
+ * VF's provide a function level reset. This is done using bit 26 of ctrl_reg.
+ * This is all the reset we can perform on a VF.
+ **/
+static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 timeout = E1000_VF_INIT_TIMEOUT;
+ u32 ret_val = -E1000_ERR_MAC_INIT;
+ u32 msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+ u32 ctrl;
+
+ /* assert vf queue/interrupt reset */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_RST);
+
+ /* we cannot initialize while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw) && timeout) {
+ timeout--;
+ udelay(5);
+ }
+
+ if (timeout) {
+ /* mailbox timeout can now become active */
+ mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
+
+ /* notify pf of vf reset completion */
+ msgbuf[0] = E1000_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1);
+
+ msleep(10);
+
+ /* set our "perm_addr" based on info provided by PF */
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+ if (!ret_val) {
+ if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK))
+ memcpy(hw->mac.perm_addr, addr, 6);
+ else
+ ret_val = -E1000_ERR_MAC_INIT;
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_vf - Inits the HW
+ * @hw: pointer to the HW structure
+ *
+ * Not much to do here except clear the PF Reset indication if there is one.
+ **/
+static s32 e1000_init_hw_vf(struct e1000_hw *hw)
+{
+ /* attempt to set and restore our mac address */
+ e1000_rar_set_vf(hw, hw->mac.addr, 0);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_hash_mc_addr_vf - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * e1000_mta_set_generic()
+ **/
+static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /*
+ * The bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * e1000_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @rar_used_count: the first RAR register free to program
+ * @rar_count: total number of supported Receive Address Registers
+ *
+ * Updates the Receive Address Registers and Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ * The parameter rar_count will usually be hw->mac.rar_entry_count
+ * unless there are workarounds that change this.
+ **/
+void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count,
+ u32 rar_used_count, u32 rar_count)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ u32 hash_value;
+ u32 cnt, i;
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+ msgbuf[0] = E1000_VF_SET_MULTICAST;
+ msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT;
+
+ for (i = 0; i < cnt; i++) {
+ hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list);
+ hash_list[i] = hash_value & 0x0FFFF;
+ mc_addr_list += ETH_ADDR_LEN;
+ }
+
+ mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE);
+}
+
+/**
+ * e1000_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vid: determines the vfta register and bit to set/unset
+ * @set: if true then set bit, else clear bit
+ **/
+static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+ s32 err;
+
+ msgbuf[0] = E1000_VF_SET_VLAN;
+ msgbuf[1] = vid;
+ /* Setting the 8 bit field MSG INFO to true indicates "add" */
+ if (set)
+ msgbuf[0] |= 1 << E1000_VT_MSGINFO_SHIFT;
+
+ mbx->ops.write_posted(hw, msgbuf, 2);
+
+ err = mbx->ops.read_posted(hw, msgbuf, 2);
+
+ /* if nacked the vlan was rejected */
+ if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
+ err = -E1000_ERR_MAC_INIT;
+
+ return err;
+}
+
+/** e1000_rlpml_set_vf - Set the maximum receive packet length
+ * @hw: pointer to the HW structure
+ * @max_size: value to assign to max frame size
+ **/
+void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+
+ msgbuf[0] = E1000_VF_SET_LPE;
+ msgbuf[1] = max_size;
+
+ mbx->ops.write_posted(hw, msgbuf, 2);
+}
+
+/**
+ * e1000_rar_set_vf - set device MAC address
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index receive address array register
+ **/
+static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, 12);
+ msgbuf[0] = E1000_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
+ e1000_read_mac_addr_vf(hw);
+}
+
+/**
+ * e1000_read_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < ETH_ADDR_LEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_for_link_vf - Check for link for a virtual interface
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see if the underlying PF is still talking to the VF and
+ * if it is then it reports the link state to the hardware, otherwise
+ * it reports link down and returns an error.
+ **/
+static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = E1000_SUCCESS;
+ u32 in_msg = 0;
+
+ /*
+ * We only want to run this if there has been a rst asserted.
+ * in this case that could mean a link change, device reset,
+ * or a virtual function reset
+ */
+
+ /* If we were hit with a reset drop the link */
+ if (!mbx->ops.check_for_rst(hw))
+ mac->get_link_status = true;
+
+ if (!mac->get_link_status)
+ goto out;
+
+ /* if link status is down no point in checking to see if pf is up */
+ if (!(er32(STATUS) & E1000_STATUS_LU))
+ goto out;
+
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error */
+ if (mbx->ops.read(hw, &in_msg, 1))
+ goto out;
+
+ /* if incoming message isn't clear to send we are waiting on response */
+ if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
+ /* message is not CTS and is NACK we must have lost CTS status */
+ if (in_msg & E1000_VT_MSGTYPE_NACK)
+ ret_val = -E1000_ERR_MAC_INIT;
+ goto out;
+ }
+
+ /* the pf is talking, if we timed out in the past we reinit */
+ if (!mbx->timeout) {
+ ret_val = -E1000_ERR_MAC_INIT;
+ goto out;
+ }
+
+ /* if we passed all the tests above then the link is up and we no
+ * longer need to check for link */
+ mac->get_link_status = false;
+
+out:
+ return ret_val;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_VF_H_
+#define _E1000_VF_H_
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+
+#include "regs.h"
+#include "defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576_VF 0x10CA
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
+
+/*
+ * Receive Address Register Count
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * These entries are also used for MAC-based filtering.
+ */
+#define E1000_RAR_ENTRIES_VF 1
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ u64 pkt_addr; /* Packet buffer address */
+ u64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ union {
+ u32 data;
+ struct {
+ u16 pkt_info; /* RSS/Packet type */
+ u16 hdr_info; /* Split Header,
+ * hdr buffer length */
+ } hs_rss;
+ } lo_dword;
+ union {
+ u32 rss; /* RSS Hash */
+ struct {
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ u32 status_error; /* ext status/error */
+ u16 length; /* Packet length */
+ u16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ u64 buffer_addr; /* Address of descriptor's data buf */
+ u32 cmd_type_len;
+ u32 olinfo_status;
+ } read;
+ struct {
+ u64 rsvd; /* Reserved */
+ u32 nxtseq_seed;
+ u32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ u32 vlan_macip_lens;
+ u32 seqnum_seed;
+ u32 type_tucmd_mlhl;
+ u32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_vfadapt,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+struct e1000_vf_stats {
+ u64 base_gprc;
+ u64 base_gptc;
+ u64 base_gorc;
+ u64 base_gotc;
+ u64 base_mprc;
+ u64 base_gotlbc;
+ u64 base_gptlbc;
+ u64 base_gorlbc;
+ u64 base_gprlbc;
+
+ u32 last_gprc;
+ u32 last_gptc;
+ u32 last_gorc;
+ u32 last_gotc;
+ u32 last_mprc;
+ u32 last_gotlbc;
+ u32 last_gptlbc;
+ u32 last_gorlbc;
+ u32 last_gprlbc;
+
+ u64 gprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 mprc;
+ u64 gotlbc;
+ u64 gptlbc;
+ u64 gorlbc;
+ u64 gprlbc;
+};
+
+#include "mbx.h"
+
+struct e1000_mac_operations {
+ /* Function pointers for the MAC. */
+ s32 (*init_params)(struct e1000_hw *);
+ s32 (*check_for_link)(struct e1000_hw *);
+ void (*clear_vfta)(struct e1000_hw *);
+ s32 (*get_bus_info)(struct e1000_hw *);
+ s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
+ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32, u32);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ s32 (*setup_link)(struct e1000_hw *);
+ void (*write_vfta)(struct e1000_hw *, u32, u32);
+ void (*mta_set)(struct e1000_hw *, u32);
+ void (*rar_set)(struct e1000_hw *, u8*, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+ s32 (*set_vfta)(struct e1000_hw *, u16, bool);
+};
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u16 mta_reg_count;
+ u16 rar_entry_count;
+
+ bool get_link_status;
+};
+
+struct e1000_mbx_operations {
+ s32 (*init_params)(struct e1000_hw *hw);
+ s32 (*read)(struct e1000_hw *, u32 *, u16);
+ s32 (*write)(struct e1000_hw *, u32 *, u16);
+ s32 (*read_posted)(struct e1000_hw *, u32 *, u16);
+ s32 (*write_posted)(struct e1000_hw *, u32 *, u16);
+ s32 (*check_for_msg)(struct e1000_hw *);
+ s32 (*check_for_ack)(struct e1000_hw *);
+ s32 (*check_for_rst)(struct e1000_hw *);
+};
+
+struct e1000_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct e1000_mbx_info {
+ struct e1000_mbx_operations ops;
+ struct e1000_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u16 size;
+};
+
+struct e1000_dev_spec_vf {
+ u32 vf_number;
+ u32 v2p_mailbox;
+};
+
+struct e1000_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_mbx_info mbx;
+
+ union {
+ struct e1000_dev_spec_vf vf;
+ } dev_spec;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+/* These functions must be implemented by drivers */
+void e1000_rlpml_set_vf(struct e1000_hw *, u16);
+void e1000_init_function_pointers_vf(struct e1000_hw *hw);
+
+
+#endif /* _E1000_VF_H_ */
}
#endif
+static const struct net_device_ops ioc3_netdev_ops = {
+ .ndo_open = ioc3_open,
+ .ndo_stop = ioc3_close,
+ .ndo_start_xmit = ioc3_start_xmit,
+ .ndo_tx_timeout = ioc3_timeout,
+ .ndo_get_stats = ioc3_get_stats,
+ .ndo_set_multicast_list = ioc3_set_multicast_list,
+ .ndo_do_ioctl = ioc3_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = ioc3_set_mac_address,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int __devinit ioc3_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ioc3_get_eaddr(ip);
/* The IOC3-specific entries in the device structure. */
- dev->open = ioc3_open;
- dev->hard_start_xmit = ioc3_start_xmit;
- dev->tx_timeout = ioc3_timeout;
dev->watchdog_timeo = 5 * HZ;
- dev->stop = ioc3_close;
- dev->get_stats = ioc3_get_stats;
- dev->do_ioctl = ioc3_ioctl;
- dev->set_multicast_list = ioc3_set_multicast_list;
- dev->set_mac_address = ioc3_set_mac_address;
+ dev->netdev_ops = &ioc3_netdev_ops;
dev->ethtool_ops = &ioc3_ethtool_ops;
dev->features = NETIF_F_IP_CSUM;
}
#endif
+static const struct net_device_ops netcard_netdev_ops = {
+ .ndo_open = net_open,
+ .ndo_stop = net_close,
+ .ndo_start_xmit = net_send_packet,
+ .ndo_get_stats = net_get_stats,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_tx_timeout = net_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
/*
* This is the real probe routine. Linux has a history of friendly device
* probes on the ISA bus. A good device probes avoids doing writes, and
np = netdev_priv(dev);
spin_lock_init(&np->lock);
- dev->open = net_open;
- dev->stop = net_close;
- dev->hard_start_xmit = net_send_packet;
- dev->get_stats = net_get_stats;
- dev->set_multicast_list = &set_multicast_list;
-
- dev->tx_timeout = &net_tx_timeout;
+ dev->netdev_ops = &netcard_netdev_ops;
dev->watchdog_timeo = MY_TX_TIMEOUT;
err = register_netdev(dev);
return 0;
}
-/**
- * ixgbe_blink_led_start_82598 - Blink LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to blink
- **/
-static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index)
-{
- ixgbe_link_speed speed = 0;
- bool link_up = 0;
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- /*
- * Link must be up to auto-blink the LEDs on the 82598EB MAC;
- * force it if link is down.
- */
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
-
- if (!link_up) {
- autoc_reg |= IXGBE_AUTOC_FLU;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- msleep(10);
- }
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg |= IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_blink_led_stop_82598 - Stop blinking LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to stop blinking
- **/
-static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index)
-{
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- autoc_reg &= ~IXGBE_AUTOC_FLU;
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg &= ~IXGBE_LED_BLINK(index);
- led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
/**
* ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
* @hw: pointer to hardware structure
.get_link_capabilities = &ixgbe_get_link_capabilities_82598,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_82598,
- .blink_led_stop = &ixgbe_blink_led_stop_82598,
+ .blink_led_start = &ixgbe_blink_led_start_generic,
+ .blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_82598,
s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan,
u32 vind, bool vlan_on);
s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw);
-s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index);
s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw);
s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val);
s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val);
return 0;
}
-/**
- * ixgbe_blink_led_start_82599 - Blink LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to blink
- **/
-s32 ixgbe_blink_led_start_82599(struct ixgbe_hw *hw, u32 index)
-{
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg |= IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_blink_led_stop_82599 - Stop blinking LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to stop blinking
- **/
-s32 ixgbe_blink_led_stop_82599(struct ixgbe_hw *hw, u32 index)
-{
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg &= ~IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
/**
* ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array
* @hw: pointer to hardware structure
.get_link_capabilities = &ixgbe_get_link_capabilities_82599,
.led_on = &ixgbe_led_on_generic,
.led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_82599,
- .blink_led_stop = &ixgbe_blink_led_stop_82599,
+ .blink_led_start = &ixgbe_blink_led_start_generic,
+ .blink_led_stop = &ixgbe_blink_led_stop_generic,
.set_rar = &ixgbe_set_rar_generic,
.clear_rar = &ixgbe_clear_rar_generic,
.set_vmdq = &ixgbe_set_vmdq_82599,
static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
/**
* Clear accounting of old secondary address list,
* don't count RAR[0]
*/
- uc_addr_in_use = hw->addr_ctrl.rar_used_count -
- hw->addr_ctrl.mc_addr_in_rar_count - 1;
+ uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
hw->addr_ctrl.overflow_promisc = 0;
IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
}
-/**
- * ixgbe_add_mc_addr - Adds a multicast address.
- * @hw: pointer to hardware structure
- * @mc_addr: new multicast address
- *
- * Adds it to unused receive address register or to the multicast table.
- **/
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
-{
- u32 rar_entries = hw->mac.num_rar_entries;
- u32 rar;
-
- hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
- mc_addr[0], mc_addr[1], mc_addr[2],
- mc_addr[3], mc_addr[4], mc_addr[5]);
-
- /*
- * Place this multicast address in the RAR if there is room,
- * else put it in the MTA
- */
- if (hw->addr_ctrl.rar_used_count < rar_entries) {
- /* use RAR from the end up for multicast */
- rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
- hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
- hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
- hw->addr_ctrl.rar_used_count++;
- hw->addr_ctrl.mc_addr_in_rar_count++;
- } else {
- ixgbe_set_mta(hw, mc_addr);
- }
-
- hw_dbg(hw, "ixgbe_add_mc_addr Complete\n");
-}
-
/**
* ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
* @hw: pointer to hardware structure
u32 mc_addr_count, ixgbe_mc_addr_itr next)
{
u32 i;
- u32 rar_entries = hw->mac.num_rar_entries;
u32 vmdq;
/*
* use.
*/
hw->addr_ctrl.num_mc_addrs = mc_addr_count;
- hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count;
- hw->addr_ctrl.mc_addr_in_rar_count = 0;
hw->addr_ctrl.mta_in_use = 0;
- /* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
- rar_entries - 1);
- for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
- }
-
/* Clear the MTA */
hw_dbg(hw, " Clearing MTA\n");
for (i = 0; i < hw->mac.mcft_size; i++)
/* Add the new addresses */
for (i = 0; i < mc_addr_count; i++) {
hw_dbg(hw, " Adding the multicast addresses:\n");
- ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq));
+ ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
}
/* Enable mta */
return 0;
}
+
+/**
+ * ixgbe_blink_led_start_generic - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+ ixgbe_link_speed speed = 0;
+ bool link_up = 0;
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /*
+ * Link must be up to auto-blink the LEDs;
+ * Force it if link is down.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+ if (!link_up) {
+ autoc_reg |= IXGBE_AUTOC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ msleep(10);
+ }
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ autoc_reg &= ~IXGBE_AUTOC_FLU;
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg &= ~IXGBE_LED_BLINK(index);
+ led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val);
s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
#ifndef writeq
s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw,
struct ixgbe_dcb_config *dcb_config)
{
- u32 i, reg;
+ u32 i, reg, rx_pba_size;
/* If PFC is disabled globally then fall back to LFC. */
if (!dcb_config->pfc_mode_enable) {
/* Configure PFC Tx thresholds per TC */
for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- /* Config and remember Tx */
+ if (dcb_config->rx_pba_cfg == pba_equal)
+ rx_pba_size = IXGBE_RXPBSIZE_64KB;
+ else
+ rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB
+ : IXGBE_RXPBSIZE_48KB;
+
+ reg = ((rx_pba_size >> 5) & 0xFFE0);
if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
- dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) {
- reg = hw->fc.high_water | IXGBE_FCRTH_FCEN;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
- reg = hw->fc.low_water | IXGBE_FCRTL_XONE;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0);
- }
+ dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
+ reg |= IXGBE_FCRTL_XONE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
+
+ reg = ((rx_pba_size >> 2) & 0xFFE0);
+ if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
+ dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
+ reg |= IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
}
/* Configure pause time (2 TCs per register) */
}
+static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int retval = 1;
+
+ switch(hw->device_id) {
+ case IXGBE_DEV_ID_82599_KX4:
+ retval = 0;
+ break;
+ default:
+ wol->supported = 0;
+ retval = 0;
+ }
+
+ return retval;
+}
+
static void ixgbe_get_wol(struct net_device *netdev,
struct ethtool_wolinfo *wol)
{
WAKE_BCAST | WAKE_MAGIC;
wol->wolopts = 0;
- if (!device_can_wakeup(&adapter->pdev->dev))
+ if (ixgbe_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
if (adapter->wol & IXGBE_WUFC_EX)
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
+ if (ixgbe_wol_exclusion(adapter, wol))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
adapter->wol = 0;
if (wol->wolopts & WAKE_UCAST)
**/
static void ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
{
- /* Start with base case */
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
-
#ifdef CONFIG_IXGBE_DCB
if (ixgbe_set_dcb_queues(adapter))
- return;
+ goto done;
#endif
if (ixgbe_set_rss_queues(adapter))
- return;
+ goto done;
+
+ /* fallback to base case */
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+
+done:
+ /* Notify the stack of the (possibly) reduced Tx Queue count. */
+ adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
}
static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
}
ret = true;
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
- for (i = 0; i < dcb_i; i++) {
- adapter->rx_ring[i].reg_idx = i << 4;
- adapter->tx_ring[i].reg_idx = i << 4;
+ if (dcb_i == 8) {
+ /*
+ * Tx TC0 starts at: descriptor queue 0
+ * Tx TC1 starts at: descriptor queue 32
+ * Tx TC2 starts at: descriptor queue 64
+ * Tx TC3 starts at: descriptor queue 80
+ * Tx TC4 starts at: descriptor queue 96
+ * Tx TC5 starts at: descriptor queue 104
+ * Tx TC6 starts at: descriptor queue 112
+ * Tx TC7 starts at: descriptor queue 120
+ *
+ * Rx TC0-TC7 are offset by 16 queues each
+ */
+ for (i = 0; i < 3; i++) {
+ adapter->tx_ring[i].reg_idx = i << 5;
+ adapter->rx_ring[i].reg_idx = i << 4;
+ }
+ for ( ; i < 5; i++) {
+ adapter->tx_ring[i].reg_idx =
+ ((i + 2) << 4);
+ adapter->rx_ring[i].reg_idx = i << 4;
+ }
+ for ( ; i < dcb_i; i++) {
+ adapter->tx_ring[i].reg_idx =
+ ((i + 8) << 3);
+ adapter->rx_ring[i].reg_idx = i << 4;
+ }
+
+ ret = true;
+ } else if (dcb_i == 4) {
+ /*
+ * Tx TC0 starts at: descriptor queue 0
+ * Tx TC1 starts at: descriptor queue 64
+ * Tx TC2 starts at: descriptor queue 96
+ * Tx TC3 starts at: descriptor queue 112
+ *
+ * Rx TC0-TC3 are offset by 32 queues each
+ */
+ adapter->tx_ring[0].reg_idx = 0;
+ adapter->tx_ring[1].reg_idx = 64;
+ adapter->tx_ring[2].reg_idx = 96;
+ adapter->tx_ring[3].reg_idx = 112;
+ for (i = 0 ; i < dcb_i; i++)
+ adapter->rx_ring[i].reg_idx = i << 5;
+
+ ret = true;
+ } else {
+ ret = false;
}
- ret = true;
} else {
ret = false;
}
}
out:
- /* Notify the stack of the (possibly) reduced Tx Queue count. */
- adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
-
return err;
}
ixgbe_reset(adapter);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
if (netif_running(netdev)) {
err = ixgbe_open(adapter->netdev);
if (err)
return 0;
}
-
#endif /* CONFIG_PM */
-static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
+
+static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct ixgbe_adapter *adapter = netdev_priv(netdev);
pci_enable_wake(pdev, PCI_D3cold, 0);
}
+ *enable_wake = !!wufc;
+
ixgbe_release_hw_control(adapter);
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __ixgbe_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
return 0;
}
+#endif /* CONFIG_PM */
static void ixgbe_shutdown(struct pci_dev *pdev)
{
- ixgbe_suspend(pdev, PMSG_SUSPEND);
+ bool wake;
+
+ __ixgbe_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
/**
}
hw->mac.ops.setup_sfp(hw);
- if (!adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)
+ if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK))
/* This will also work for DA Twinax connections */
schedule_work(&adapter->multispeed_fiber_task);
adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK;
int count = 0;
unsigned int f;
- r_idx = (adapter->num_tx_queues - 1) & skb->queue_mapping;
+ r_idx = skb->queue_mapping;
tx_ring = &adapter->tx_ring[r_idx];
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
static int cards_found;
int i, err, pci_using_dac;
- u16 pm_value = 0;
u32 part_num, eec;
err = pci_enable_device(pdev);
switch (pdev->device) {
case IXGBE_DEV_ID_82599_KX4:
-#define IXGBE_PCIE_PMCSR 0x44
- adapter->wol = IXGBE_WUFC_MAG;
- pci_read_config_word(pdev, IXGBE_PCIE_PMCSR, &pm_value);
- pci_write_config_word(pdev, IXGBE_PCIE_PMCSR,
- (pm_value | (1 << 8)));
+ adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
+ IXGBE_WUFC_MC | IXGBE_WUFC_BC);
break;
default:
adapter->wol = 0;
jme_pci_dma64(struct pci_dev *pdev)
{
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_64BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 1;
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_40BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(40)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)))
return 1;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
if (!MACH_IS_MAC)
return ERR_PTR(-ENODEV);
- dev = alloc_ei_netdev();
+ dev = ____alloc_ei_netdev(0);
if (!dev)
return ERR_PTR(-ENOMEM);
static const struct net_device_ops mac8390_netdev_ops = {
.ndo_open = mac8390_open,
.ndo_stop = mac8390_close,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
nubus_writew(swab16(value), dev->mem_start + portno);
}
+static const struct net_device_ops mac89x0_netdev_ops = {
+ .ndo_open = net_open,
+ .ndo_stop = net_close,
+ .ndo_start_xmit = net_send_packet,
+ .ndo_get_stats = net_get_stats,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_set_mac_address = set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
/* Probe for the CS8900 card in slot E. We won't bother looking
anywhere else until we have a really good reason to do so. */
struct net_device * __init mac89x0_probe(int unit)
printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
- dev->open = net_open;
- dev->stop = net_close;
- dev->hard_start_xmit = net_send_packet;
- dev->get_stats = net_get_stats;
- dev->set_multicast_list = &set_multicast_list;
- dev->set_mac_address = &set_mac_address;
+ dev->netdev_ops = &mac89x0_netdev_ops;
err = register_netdev(dev);
if (err)
dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
(unsigned long)status);
- if (status & MACB_BIT(UND)) {
+ if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
int i;
- printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
- bp->dev->name);
+ printk(KERN_ERR "%s: TX %s, resetting buffers\n",
+ bp->dev->name, status & MACB_BIT(UND) ?
+ "underrun" : "retry limit exceeded");
/* Transfer ongoing, disable transmitter, to avoid confusion */
if (status & MACB_BIT(TGO))
macb_writel(bp, RSR, status);
work_done = 0;
- if (!status) {
- /*
- * This may happen if an interrupt was pending before
- * this function was called last time, and no packets
- * have been received since.
- */
- napi_complete(napi);
- goto out;
- }
dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
(unsigned long)status, budget);
- if (!(status & MACB_BIT(REC))) {
- dev_warn(&bp->pdev->dev,
- "No RX buffers complete, status = %02lx\n",
- (unsigned long)status);
- napi_complete(napi);
- goto out;
- }
-
work_done = macb_rx(bp, budget);
if (work_done < budget)
napi_complete(napi);
* We've done what we can to clean the buffers. Make sure we
* get notified when new packets arrive.
*/
-out:
macb_writel(bp, IER, MACB_RX_INT_FLAGS);
/* TODO: Handle errors */
}
}
- if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND)))
+ if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) |
+ MACB_BIT(ISR_RLE)))
macb_tx(bp);
/*
return phy_mii_ioctl(phydev, if_mii(rq), cmd);
}
+static const struct net_device_ops macb_netdev_ops = {
+ .ndo_open = macb_open,
+ .ndo_stop = macb_close,
+ .ndo_start_xmit = macb_start_xmit,
+ .ndo_set_multicast_list = macb_set_rx_mode,
+ .ndo_get_stats = macb_get_stats,
+ .ndo_do_ioctl = macb_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __init macb_probe(struct platform_device *pdev)
{
struct eth_platform_data *pdata;
goto err_out_iounmap;
}
- dev->open = macb_open;
- dev->stop = macb_close;
- dev->hard_start_xmit = macb_start_xmit;
- dev->get_stats = macb_get_stats;
- dev->set_multicast_list = macb_set_rx_mode;
- dev->do_ioctl = macb_ioctl;
+ dev->netdev_ops = &macb_netdev_ops;
netif_napi_add(dev, &bp->napi, macb_poll, 64);
dev->ethtool_ops = &macb_ethtool_ops;
return err;
}
+static const struct net_device_ops macsonic_netdev_ops = {
+ .ndo_open = macsonic_open,
+ .ndo_stop = macsonic_close,
+ .ndo_start_xmit = sonic_send_packet,
+ .ndo_set_multicast_list = sonic_multicast_list,
+ .ndo_tx_timeout = sonic_tx_timeout,
+ .ndo_get_stats = sonic_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __init macsonic_init(struct net_device *dev)
{
struct sonic_local* lp = netdev_priv(dev);
lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
- dev->open = macsonic_open;
- dev->stop = macsonic_close;
- dev->hard_start_xmit = sonic_send_packet;
- dev->get_stats = sonic_get_stats;
- dev->set_multicast_list = &sonic_multicast_list;
- dev->tx_timeout = sonic_tx_timeout;
+ dev->netdev_ops = &macsonic_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
/*
const struct macvlan_dev *vlan = netdev_priv(dev);
struct net_device *lowerdev = vlan->lowerdev;
- if (lowerdev->ethtool_ops->get_rx_csum == NULL)
+ if (lowerdev->ethtool_ops == NULL ||
+ lowerdev->ethtool_ops->get_rx_csum == NULL)
return 0;
return lowerdev->ethtool_ops->get_rx_csum(lowerdev);
}
const struct macvlan_dev *vlan = netdev_priv(dev);
struct net_device *lowerdev = vlan->lowerdev;
- if (!lowerdev->ethtool_ops->get_settings)
+ if (!lowerdev->ethtool_ops ||
+ !lowerdev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
return lowerdev->ethtool_ops->get_settings(lowerdev, cmd);
const struct macvlan_dev *vlan = netdev_priv(dev);
struct net_device *lowerdev = vlan->lowerdev;
- if (!lowerdev->ethtool_ops->get_flags)
+ if (!lowerdev->ethtool_ops ||
+ !lowerdev->ethtool_ops->get_flags)
return 0;
return lowerdev->ethtool_ops->get_flags(lowerdev);
}
static int mdio_probe(struct meth_private *priv)
{
int i;
- unsigned long p2, p3;
+ unsigned long p2, p3, flags;
/* check if phy is detected already */
if(priv->phy_addr>=0&&priv->phy_addr<32)
return 0;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
for (i=0;i<32;++i){
priv->phy_addr=i;
p2=mdio_read(priv,2);
break;
}
}
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
if(priv->phy_addr<32) {
return 0;
}
static void meth_rx(struct net_device* dev, unsigned long int_status)
{
struct sk_buff *skb;
- unsigned long status;
+ unsigned long status, flags;
struct meth_private *priv = netdev_priv(dev);
unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
priv->dma_ctrl &= ~METH_DMA_RX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
if (int_status & METH_INT_RX_UNDERFLOW) {
fifo_rptr = (fifo_rptr - 1) & 0x0f;
mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write];
ADVANCE_RX_PTR(priv->rx_write);
}
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
/* In case there was underflow, and Rx DMA was disabled */
priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
mace->eth.int_stat = METH_INT_RX_THRESHOLD;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
static int meth_tx_full(struct net_device *dev)
static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
{
struct meth_private *priv = netdev_priv(dev);
- unsigned long status;
+ unsigned long status, flags;
struct sk_buff *skb;
unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
/* Stop DMA notification */
priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
}
mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
static void meth_error(struct net_device* dev, unsigned status)
{
struct meth_private *priv = netdev_priv(dev);
+ unsigned long flags;
printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
/* check for errors too... */
printk(KERN_WARNING "meth: Rx overflow\n");
if (status & (METH_INT_RX_UNDERFLOW)) {
printk(KERN_WARNING "meth: Rx underflow\n");
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
mace->eth.int_stat = METH_INT_RX_UNDERFLOW;
/* more underflow interrupts will be delivered,
* effectively throwing us into an infinite loop.
priv->dma_ctrl &= ~METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
DPRINTK("Disabled meth Rx DMA temporarily\n");
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
mace->eth.int_stat = METH_INT_ERROR;
}
if (cq->is_tx)
del_timer(&cq->timer);
- else
+ else {
napi_disable(&cq->napi);
+ netif_napi_del(&cq->napi);
+ }
mlx4_cq_free(mdev->dev, &cq->mcq);
}
mdev->workqueue = create_singlethread_workqueue("mlx4_en");
if (!mdev->workqueue) {
err = -ENOMEM;
- goto err_close_nic;
+ goto err_mr;
}
/* At this stage all non-port specific tasks are complete:
flush_workqueue(mdev->workqueue);
/* Stop event queue before we drop down to release shared SW state */
-
-err_close_nic:
destroy_workqueue(mdev->workqueue);
+
err_mr:
mlx4_mr_free(dev, &mdev->mr);
err_uar:
if (netif_msg_timer(priv))
mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port);
- if (netif_carrier_ok(dev)) {
- priv->port_stats.tx_timeout++;
- mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
- queue_work(mdev->workqueue, &priv->watchdog_task);
- }
+ priv->port_stats.tx_timeout++;
+ mlx4_dbg(DRV, priv, "Scheduling watchdog\n");
+ queue_work(mdev->workqueue, &priv->watchdog_task);
}
err = mlx4_en_activate_cq(priv, cq);
if (err) {
mlx4_err(mdev, "Failed activating Rx CQ\n");
- goto rx_err;
+ goto cq_err;
}
for (j = 0; j < cq->size; j++)
cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK;
struct net_device *dev = priv->dev;
mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port);
- mlx4_en_stop_port(dev);
- if (mlx4_en_start_port(dev))
- mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+
+ mutex_lock(&mdev->state_lock);
+ if (priv->port_up) {
+ mlx4_en_stop_port(dev);
+ if (mlx4_en_start_port(dev))
+ mlx4_err(mdev, "Failed restarting port %d\n", priv->port);
+ }
+ mutex_unlock(&mdev->state_lock);
}
* Set driver features
*/
dev->features |= NETIF_F_SG;
- dev->features |= NETIF_F_HW_CSUM;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
dev->features |= NETIF_F_HIGHDMA;
dev->features |= NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
struct mlx4_cmd_mailbox *mailbox;
u64 in_mod = reset << 8 | port;
int err;
+ int i;
mailbox = mlx4_alloc_cmd_mailbox(mdev->dev);
if (IS_ERR(mailbox))
spin_lock_bh(&priv->stats_lock);
- stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) -
- be32_to_cpu(mlx4_en_stats->RDROP);
- stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_1) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_2) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_3) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_4) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_5) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_6) +
- be64_to_cpu(mlx4_en_stats->TTOT_prio_7) +
- be64_to_cpu(mlx4_en_stats->TTOT_novlan) +
- be64_to_cpu(mlx4_en_stats->TTOT_loopbk);
- stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_1) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_2) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_3) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_4) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_5) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_6) +
- be64_to_cpu(mlx4_en_stats->ROCT_prio_7) +
- be64_to_cpu(mlx4_en_stats->ROCT_novlan);
-
- stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) +
- be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk);
+ stats->rx_packets = 0;
+ stats->rx_bytes = 0;
+ for (i = 0; i < priv->rx_ring_num; i++) {
+ stats->rx_packets += priv->rx_ring[i].packets;
+ stats->rx_bytes += priv->rx_ring[i].bytes;
+ }
+ stats->tx_packets = 0;
+ stats->tx_bytes = 0;
+ for (i = 0; i <= priv->tx_ring_num; i++) {
+ stats->tx_packets += priv->tx_ring[i].packets;
+ stats->tx_bytes += priv->tx_ring[i].bytes;
+ }
stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) +
be32_to_cpu(mlx4_en_stats->RdropLength) +
vunmap(buf->direct.buf);
}
+
+void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
+{
+ return;
+}
+
/* Initialize page allocators */
err = mlx4_en_init_allocator(priv, ring);
if (err) {
- mlx4_err(mdev, "Failed initializing ring allocator\n");
- goto err_allocator;
+ mlx4_err(mdev, "Failed initializing ring allocator\n");
+ ring_ind--;
+ goto err_allocator;
}
/* Fill Rx buffers */
ring->wqres.db.dma, &ring->srq);
if (err){
mlx4_err(mdev, "Failed to allocate srq\n");
+ ring_ind--;
goto err_srq;
}
ring->srq.event = mlx4_en_srq_event;
used_frags = mlx4_en_complete_rx_desc(priv, rx_desc, skb_frags,
skb_shinfo(skb)->frags,
page_alloc, length);
+ if (unlikely(!used_frags)) {
+ kfree_skb(skb);
+ return NULL;
+ }
skb_shinfo(skb)->nr_frags = used_frags;
/* Copy headers into the skb linear buffer */
}
}
-static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event)
-{
- return;
-}
-
-
static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
int qpn, int srqn, int cqn,
enum mlx4_qp_state *state,
if (err) {
mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
goto out;
- return err;
}
qp->event = mlx4_en_sqp_event;
mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn);
goto err_reserve;
}
+ ring->qp.event = mlx4_en_sqp_event;
return 0;
INC_PERF_COUNTER(priv->pstats.tx_poll);
- if (!spin_trylock(&ring->comp_lock)) {
+ if (!spin_trylock_irq(&ring->comp_lock)) {
mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
return;
}
if (inflight && priv->port_up)
mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
- spin_unlock(&ring->comp_lock);
+ spin_unlock_irq(&ring->comp_lock);
}
static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock(&ring->comp_lock)) {
+ if (spin_trylock_irq(&ring->comp_lock)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock(&ring->comp_lock);
+ spin_unlock_irq(&ring->comp_lock);
}
}
nreq = err;
goto retry;
}
-
+ kfree(entries);
goto no_msi;
}
void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride,
int is_tx, int rss, int qpn, int cqn, int srqn,
struct mlx4_qp_context *context);
+void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event);
int mlx4_en_map_buffer(struct mlx4_buf *buf);
void mlx4_en_unmap_buffer(struct mlx4_buf *buf);
struct mlx4_cmd_mailbox *mailbox;
int err;
+ if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH)
+ return 0;
+
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
memset(mailbox->buf, 0, 256);
- if (dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH)
- return 0;
((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port];
err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_SET_PORT,
struct work_struct tx_timeout_task;
struct napi_struct napi;
+ u8 oom;
u8 work_link;
u8 work_tx;
u8 work_tx_end;
u8 work_rx;
u8 work_rx_refill;
- u8 work_rx_oom;
int skb_size;
struct sk_buff_head rx_recycle;
if (rxq->rx_curr_desc == rxq->rx_ring_size)
rxq->rx_curr_desc = 0;
- dma_unmap_single(NULL, rx_desc->buf_ptr,
+ dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr,
rx_desc->buf_size, DMA_FROM_DEVICE);
rxq->rx_desc_count--;
rx++;
dma_get_cache_alignment() - 1);
if (skb == NULL) {
- mp->work_rx_oom |= 1 << rxq->index;
+ mp->oom = 1;
goto oom;
}
rx_desc = rxq->rx_desc_area + rx;
- rx_desc->buf_ptr = dma_map_single(NULL, skb->data,
- mp->skb_size, DMA_FROM_DEVICE);
+ rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
+ skb->data, mp->skb_size,
+ DMA_FROM_DEVICE);
rx_desc->buf_size = mp->skb_size;
rxq->rx_skb[rx] = skb;
wmb();
static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
{
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
int nr_frags = skb_shinfo(skb)->nr_frags;
int frag;
desc->l4i_chk = 0;
desc->byte_cnt = this_frag->size;
- desc->buf_ptr = dma_map_page(NULL, this_frag->page,
- this_frag->page_offset,
- this_frag->size,
- DMA_TO_DEVICE);
+ desc->buf_ptr = dma_map_page(mp->dev->dev.parent,
+ this_frag->page,
+ this_frag->page_offset,
+ this_frag->size, DMA_TO_DEVICE);
}
}
desc->l4i_chk = l4i_chk;
desc->byte_cnt = length;
- desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+ desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data,
+ length, DMA_TO_DEVICE);
__skb_queue_tail(&txq->tx_skb, skb);
}
if (cmd_sts & TX_FIRST_DESC) {
- dma_unmap_single(NULL, desc->buf_ptr,
+ dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
desc->byte_cnt, DMA_TO_DEVICE);
} else {
- dma_unmap_page(NULL, desc->buf_ptr,
+ dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr,
desc->byte_cnt, DMA_TO_DEVICE);
}
spin_lock_bh(&mp->mib_counters_lock);
p->good_octets_received += mib_read(mp, 0x00);
- p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
p->bad_octets_received += mib_read(mp, 0x08);
p->internal_mac_transmit_err += mib_read(mp, 0x0c);
p->good_frames_received += mib_read(mp, 0x10);
p->frames_512_to_1023_octets += mib_read(mp, 0x30);
p->frames_1024_to_max_octets += mib_read(mp, 0x34);
p->good_octets_sent += mib_read(mp, 0x38);
- p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32;
p->good_frames_sent += mib_read(mp, 0x40);
p->excessive_collision += mib_read(mp, 0x44);
p->multicast_frames_sent += mib_read(mp, 0x48);
mp->rx_desc_sram_size);
rxq->rx_desc_dma = mp->rx_desc_sram_addr;
} else {
- rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
- &rxq->rx_desc_dma,
- GFP_KERNEL);
+ rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+ size, &rxq->rx_desc_dma,
+ GFP_KERNEL);
}
if (rxq->rx_desc_area == NULL) {
if (index == 0 && size <= mp->rx_desc_sram_size)
iounmap(rxq->rx_desc_area);
else
- dma_free_coherent(NULL, size,
+ dma_free_coherent(mp->dev->dev.parent, size,
rxq->rx_desc_area,
rxq->rx_desc_dma);
rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
iounmap(rxq->rx_desc_area);
else
- dma_free_coherent(NULL, rxq->rx_desc_area_size,
+ dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size,
rxq->rx_desc_area, rxq->rx_desc_dma);
kfree(rxq->rx_skb);
mp->tx_desc_sram_size);
txq->tx_desc_dma = mp->tx_desc_sram_addr;
} else {
- txq->tx_desc_area = dma_alloc_coherent(NULL, size,
- &txq->tx_desc_dma,
- GFP_KERNEL);
+ txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+ size, &txq->tx_desc_dma,
+ GFP_KERNEL);
}
if (txq->tx_desc_area == NULL) {
txq->tx_desc_area_size <= mp->tx_desc_sram_size)
iounmap(txq->tx_desc_area);
else
- dma_free_coherent(NULL, txq->tx_desc_area_size,
+ dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size,
txq->tx_desc_area, txq->tx_desc_dma);
}
mp = container_of(napi, struct mv643xx_eth_private, napi);
- mp->work_rx_refill |= mp->work_rx_oom;
- mp->work_rx_oom = 0;
+ if (unlikely(mp->oom)) {
+ mp->oom = 0;
+ del_timer(&mp->rx_oom);
+ }
work_done = 0;
while (work_done < budget) {
continue;
}
- queue_mask = mp->work_tx | mp->work_tx_end |
- mp->work_rx | mp->work_rx_refill;
+ queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx;
+ if (likely(!mp->oom))
+ queue_mask |= mp->work_rx_refill;
+
if (!queue_mask) {
if (mv643xx_eth_collect_events(mp))
continue;
txq_maybe_wake(mp->txq + queue);
} else if (mp->work_rx & queue_mask) {
work_done += rxq_process(mp->rxq + queue, work_tbd);
- } else if (mp->work_rx_refill & queue_mask) {
+ } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) {
work_done += rxq_refill(mp->rxq + queue, work_tbd);
} else {
BUG();
}
if (work_done < budget) {
- if (mp->work_rx_oom)
+ if (mp->oom)
mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
napi_complete(napi);
wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
pscr |= FORCE_LINK_PASS;
wrlp(mp, PORT_SERIAL_CONTROL, pscr);
- wrlp(mp, SDMA_CONFIG, PORT_SDMA_CONFIG_DEFAULT_VALUE);
-
/*
* Configure TX path and queues.
*/
rxq_refill(mp->rxq + i, INT_MAX);
}
- if (mp->work_rx_oom) {
+ if (mp->oom) {
mp->rx_oom.expires = jiffies + (HZ / 10);
add_timer(&mp->rx_oom);
}
netif_carrier_off(dev);
+ wrlp(mp, SDMA_CONFIG, PORT_SDMA_CONFIG_DEFAULT_VALUE);
+
set_rx_coal(mp, 250);
set_tx_coal(mp, 0);
lro_mgr->lro_arr = ss->rx_done.lro_desc;
lro_mgr->get_frag_header = myri10ge_get_frag_header;
lro_mgr->max_aggr = myri10ge_lro_max_pkts;
+ lro_mgr->frag_align_pad = 2;
if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
lro_mgr->max_aggr = MAX_SKB_FRAGS;
dev->ethtool_ops = &ne2k_pci_ethtool_ops;
NS8390_init(dev, 0);
+ memcpy(dev->dev_addr, SA_prom, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
i = register_netdev(dev);
if (i)
goto err_out_free_netdev;
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = SA_prom[i];
printk("%s: %s found at %#lx, IRQ %d, %pM.\n",
dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq,
dev->dev_addr);
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
return 0;
err_out_free_netdev:
struct netconsole_target *nt;
struct net_device *dev = ptr;
- if (!(event == NETDEV_CHANGENAME))
+ if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER))
goto done;
spin_lock_irqsave(&target_list_lock, flags);
case NETDEV_CHANGENAME:
strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ);
break;
+ case NETDEV_UNREGISTER:
+ if (!nt->enabled)
+ break;
+ netpoll_cleanup(&nt->np);
+ nt->enabled = 0;
+ printk(KERN_INFO "netconsole: network logging stopped"
+ ", interface %s unregistered\n",
+ dev->name);
+ break;
}
}
netconsole_target_put(nt);
{
u64 val = 0;
+ *ret = 0;
switch (rp->rbr_block_size) {
case 4 * 1024:
val |= (RBR_BLKSIZE_4K << RBR_CFIG_B_BLKSIZE_SHIFT);
plat_dev = platform_device_register_simple("niu", niu_parent_index,
NULL, 0);
- if (!plat_dev)
+ if (IS_ERR(plat_dev))
return NULL;
for (i = 0; attr_name(niu_parent_attributes[i]); i++) {
PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
- PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"),
+ PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
+#include <linux/err.h>
#define MII_REGS_NUM 29
int ret;
pdev = platform_device_register_simple("Fixed MDIO bus", 0, NULL, 0);
- if (!pdev) {
- ret = -ENOMEM;
+ if (IS_ERR(pdev)) {
+ ret = PTR_ERR(pdev);
goto err_pdev;
}
#define MII_M1111_COPPER 0
#define MII_M1111_FIBER 1
+#define MII_88E1121_PHY_LED_CTRL 16
+#define MII_88E1121_PHY_LED_PAGE 3
+#define MII_88E1121_PHY_LED_DEF 0x0030
+#define MII_88E1121_PHY_PAGE 22
+
#define MII_M1011_PHY_STATUS 0x11
#define MII_M1011_PHY_STATUS_1000 0x8000
#define MII_M1011_PHY_STATUS_100 0x4000
return err;
}
+static int m88e1121_config_aneg(struct phy_device *phydev)
+{
+ int err, temp;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ temp = phy_read(phydev, MII_88E1121_PHY_PAGE);
+
+ phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+ phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
+ phy_write(phydev, MII_88E1121_PHY_PAGE, temp);
+
+ err = genphy_config_aneg(phydev);
+
+ return err;
+}
+
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
return 0;
}
+static int m88e1121_did_interrupt(struct phy_device *phydev)
+{
+ int imask;
+
+ imask = phy_read(phydev, MII_M1011_IEVENT);
+
+ if (imask & MII_M1011_IMASK_INIT)
+ return 1;
+
+ return 0;
+}
+
static struct phy_driver marvell_drivers[] = {
{
.phy_id = 0x01410c60,
.config_intr = &marvell_config_intr,
.driver = {.owner = THIS_MODULE,},
},
+ {
+ .phy_id = 0x01410cb0,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1121R",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_aneg = &m88e1121_config_aneg,
+ .read_status = &marvell_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .did_interrupt = &m88e1121_did_interrupt,
+ .driver = { .owner = THIS_MODULE },
+ },
{
.phy_id = 0x01410cd0,
.phy_id_mask = 0xfffffff0,
phydev->adjust_state = handler;
INIT_DELAYED_WORK(&phydev->state_queue, phy_state_machine);
- schedule_delayed_work(&phydev->state_queue, jiffies + HZ);
+ schedule_delayed_work(&phydev->state_queue, HZ);
}
/**
struct phy_device *phydev =
container_of(work, struct phy_device, phy_queue);
+ if (phydev->drv->did_interrupt &&
+ !phydev->drv->did_interrupt(phydev))
+ goto ignore;
+
err = phy_disable_interrupts(phydev);
if (err)
return;
+ignore:
+ atomic_dec(&phydev->irq_disable);
+ enable_irq(phydev->irq);
+ return;
+
irq_enable_err:
disable_irq(phydev->irq);
atomic_inc(&phydev->irq_disable);
if (err < 0)
phy_error(phydev);
- schedule_delayed_work(&phydev->state_queue,
- jiffies + PHY_STATE_TIME * HZ);
+ schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
}
if (ret) {
pr_debug("%s: WEP/WPA setup failed %d\n", __func__,
ret);
+ ret = -EPERM;
+ gelic_wl_send_iwap_event(wl, NULL);
+ goto out;
}
/* start association */
"Florian Fainelli <florian@openwrt.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("RDC R6040 NAPI PCI FastEthernet driver");
+MODULE_VERSION(DRV_VERSION " " DRV_RELDATE);
/* RX and TX interrupts that we handle */
#define RX_INTS (RX_FIFO_FULL | RX_NO_DESC | RX_FINISH)
#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
-#define RxPacketMaxSize 0x3FE8 /* 16K - 1 - ETH_HLEN - VLAN - CRC... */
#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */
#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
return cmd;
}
-static void rtl_set_rx_max_size(void __iomem *ioaddr)
+static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
{
/* Low hurts. Let's disable the filtering. */
- RTL_W16(RxMaxSize, 16383);
+ RTL_W16(RxMaxSize, rx_buf_sz);
}
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
RTL_W8(EarlyTxThres, EarlyTxThld);
- rtl_set_rx_max_size(ioaddr);
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
(tp->mac_version == RTL_GIGA_MAC_VER_02) ||
RTL_W8(EarlyTxThres, EarlyTxThld);
- rtl_set_rx_max_size(ioaddr);
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
RTL_W8(EarlyTxThres, EarlyTxThld);
- rtl_set_rx_max_size(ioaddr);
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
int handled = 0;
int status;
+ /* loop handling interrupts until we have no new ones or
+ * we hit a invalid/hotplug case.
+ */
status = RTL_R16(IntrStatus);
+ while (status && status != 0xffff) {
+ handled = 1;
- /* hotplug/major error/no more work/shared irq */
- if ((status == 0xffff) || !status)
- goto out;
-
- handled = 1;
+ /* Handle all of the error cases first. These will reset
+ * the chip, so just exit the loop.
+ */
+ if (unlikely(!netif_running(dev))) {
+ rtl8169_asic_down(ioaddr);
+ break;
+ }
- if (unlikely(!netif_running(dev))) {
- rtl8169_asic_down(ioaddr);
- goto out;
- }
+ /* Work around for rx fifo overflow */
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+ netif_stop_queue(dev);
+ rtl8169_tx_timeout(dev);
+ break;
+ }
- status &= tp->intr_mask;
- RTL_W16(IntrStatus,
- (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ break;
+ }
- if (!(status & tp->intr_event))
- goto out;
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
- /* Work around for rx fifo overflow */
- if (unlikely(status & RxFIFOOver) &&
- (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
- netif_stop_queue(dev);
- rtl8169_tx_timeout(dev);
- goto out;
- }
+ /* We need to see the lastest version of tp->intr_mask to
+ * avoid ignoring an MSI interrupt and having to wait for
+ * another event which may never come.
+ */
+ smp_rmb();
+ if (status & tp->intr_mask & tp->napi_event) {
+ RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+ tp->intr_mask = ~tp->napi_event;
+
+ if (likely(napi_schedule_prep(&tp->napi)))
+ __napi_schedule(&tp->napi);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
+ }
+ }
- if (unlikely(status & SYSErr)) {
- rtl8169_pcierr_interrupt(dev);
- goto out;
+ /* We only get a new MSI interrupt when all active irq
+ * sources on the chip have been acknowledged. So, ack
+ * everything we've seen and check if new sources have become
+ * active to avoid blocking all interrupts from the chip.
+ */
+ RTL_W16(IntrStatus,
+ (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ status = RTL_R16(IntrStatus);
}
- if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
-
- if (status & tp->napi_event) {
- RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
- tp->intr_mask = ~tp->napi_event;
-
- if (likely(napi_schedule_prep(&tp->napi)))
- __napi_schedule(&tp->napi);
- else if (netif_msg_intr(tp)) {
- printk(KERN_INFO "%s: interrupt %04x in poll\n",
- dev->name, status);
- }
- }
-out:
return IRQ_RETVAL(handled);
}
if (work_done < budget) {
napi_complete(napi);
- tp->intr_mask = 0xffff;
- /*
- * 20040426: the barrier is not strictly required but the
- * behavior of the irq handler could be less predictable
- * without it. Btw, the lack of flush for the posted pci
- * write is safe - FR
+
+ /* We need for force the visibility of tp->intr_mask
+ * for other CPUs, as we can loose an MSI interrupt
+ * and potentially wait for a retransmit timeout if we don't.
+ * The posted write to IntrMask is safe, as it will
+ * eventually make it to the chip and we won't loose anything
+ * until it does.
*/
+ tp->intr_mask = 0xffff;
smp_wmb();
RTL_W16(IntrMask, tp->intr_event);
}
WARN_ON(channel->rx_pkt != NULL);
efx_rx_strategy(channel);
-
- netif_napi_add(channel->napi_dev, &channel->napi_str,
- efx_poll, napi_weight);
}
}
efx_for_each_channel(channel, efx) {
channel->napi_dev = efx->net_dev;
+ netif_napi_add(channel->napi_dev, &channel->napi_str,
+ efx_poll, napi_weight);
}
return 0;
}
struct efx_channel *channel;
efx_for_each_channel(channel, efx) {
+ if (channel->napi_dev)
+ netif_napi_del(&channel->napi_str);
channel->napi_dev = NULL;
}
}
EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE);
if (EFX_IS10G(efx))
- EFX_SET_OWORD_FIELD(phy_event, XG_PHY_INTR, 1);
+ EFX_SET_QWORD_FIELD(phy_event, XG_PHY_INTR, 1);
else
- EFX_SET_OWORD_FIELD(phy_event, G_PHY0_INTR, 1);
+ EFX_SET_QWORD_FIELD(phy_event, G_PHY0_INTR, 1);
falcon_generate_event(&efx->channel[0], &phy_event);
}
return ret;
}
+static const struct net_device_ops sh_eth_netdev_ops = {
+ .ndo_open = sh_eth_open,
+ .ndo_stop = sh_eth_close,
+ .ndo_start_xmit = sh_eth_start_xmit,
+ .ndo_get_stats = sh_eth_get_stats,
+ .ndo_set_multicast_list = sh_eth_set_multicast_list,
+ .ndo_tx_timeout = sh_eth_tx_timeout,
+ .ndo_do_ioctl = sh_eth_do_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int sh_eth_drv_probe(struct platform_device *pdev)
{
int ret, i, devno = 0;
mdp->edmac_endian = pd->edmac_endian;
/* set function */
- ndev->open = sh_eth_open;
- ndev->hard_start_xmit = sh_eth_start_xmit;
- ndev->stop = sh_eth_close;
- ndev->get_stats = sh_eth_get_stats;
- ndev->set_multicast_list = sh_eth_set_multicast_list;
- ndev->do_ioctl = sh_eth_do_ioctl;
- ndev->tx_timeout = sh_eth_tx_timeout;
+ ndev->netdev_ops = &sh_eth_netdev_ops;
ndev->watchdog_timeo = TX_TIMEOUT;
mdp->post_rx = POST_RX >> (devno << 1);
if (netif_msg_ifdown(skge))
printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
- netif_stop_queue(dev);
+ netif_tx_disable(dev);
if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
del_timer_sync(&skge->link_timer);
}
skge->tx_ring.to_clean = e;
- netif_wake_queue(dev);
}
static void skge_tx_timeout(struct net_device *dev)
skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP);
skge_tx_clean(dev);
+ netif_wake_queue(dev);
}
static int skge_change_mtu(struct net_device *dev, int new_mtu)
* MN10300/AM33 configuration
*/
-#include <asm/unit/smc91111.h>
+#include <unit/smc91111.h>
#else
goto out;
}
- SMSC_WARNING(HW, "Timed out waiting for MII write to finish");
+ SMSC_WARNING(HW, "Timed out waiting for MII read to finish");
reg = -EIO;
out:
return ERR_PTR(err);
}
+static const struct net_device_ops sun3_82586_netdev_ops = {
+ .ndo_open = sun3_82586_open,
+ .ndo_stop = sun3_82586_close,
+ .ndo_start_xmit = sun3_82586_send_packet,
+ .ndo_set_multicast_list = set_multicast_list,
+ .ndo_tx_timeout = sun3_82586_timeout,
+ .ndo_get_stats = sun3_82586_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int __init sun3_82586_probe1(struct net_device *dev,int ioaddr)
{
int i, size, retval;
printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq);
- dev->open = sun3_82586_open;
- dev->stop = sun3_82586_close;
- dev->get_stats = sun3_82586_get_stats;
- dev->tx_timeout = sun3_82586_timeout;
+ dev->netdev_ops = &sun3_82586_netdev_ops;
dev->watchdog_timeo = HZ/20;
- dev->hard_start_xmit = sun3_82586_send_packet;
- dev->set_multicast_list = set_multicast_list;
dev->if_port = 0;
return 0;
return 0;
}
+static const struct net_device_ops tc35815_netdev_ops = {
+ .ndo_open = tc35815_open,
+ .ndo_stop = tc35815_close,
+ .ndo_start_xmit = tc35815_send_packet,
+ .ndo_get_stats = tc35815_get_stats,
+ .ndo_set_multicast_list = tc35815_set_multicast_list,
+ .ndo_tx_timeout = tc35815_tx_timeout,
+ .ndo_do_ioctl = tc35815_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = tc35815_poll_controller,
+#endif
+};
+
static int __devinit tc35815_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ioaddr = pcim_iomap_table(pdev)[1];
/* Initialize the device structure. */
- dev->open = tc35815_open;
- dev->hard_start_xmit = tc35815_send_packet;
- dev->stop = tc35815_close;
- dev->get_stats = tc35815_get_stats;
- dev->set_multicast_list = tc35815_set_multicast_list;
- dev->do_ioctl = tc35815_ioctl;
+ dev->netdev_ops = &tc35815_netdev_ops;
dev->ethtool_ops = &tc35815_ethtool_ops;
- dev->tx_timeout = tc35815_tx_timeout;
dev->watchdog_timeo = TC35815_TX_TIMEOUT;
#ifdef TC35815_NAPI
netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT);
#endif
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = tc35815_poll_controller;
-#endif
dev->irq = pdev->irq;
dev->base_addr = (unsigned long)ioaddr;
if (!(tmp & EEPROM_ADDR_COMPLETE))
return -EBUSY;
- *val = tr32(GRC_EEPROM_DATA);
+ tmp = tr32(GRC_EEPROM_DATA);
+
+ /*
+ * The data will always be opposite the native endian
+ * format. Perform a blind byteswap to compensate.
+ */
+ *val = swab32(tmp);
+
return 0;
}
memcpy(&data, buf + i, 4);
- tw32(GRC_EEPROM_DATA, be32_to_cpu(data));
+ /*
+ * The SEEPROM interface expects the data to always be opposite
+ * the native endian format. We accomplish this by reversing
+ * all the operations that would have been performed on the
+ * data from a call to tg3_nvram_read_be32().
+ */
+ tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data)));
val = tr32(GRC_EEPROM_ADDR);
tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE);
.set_settings = tsi108_set_settings,
};
+static const struct net_device_ops tsi108_netdev_ops = {
+ .ndo_open = tsi108_open,
+ .ndo_stop = tsi108_close,
+ .ndo_start_xmit = tsi108_send_packet,
+ .ndo_set_multicast_list = tsi108_set_rx_mode,
+ .ndo_get_stats = tsi108_get_stats,
+ .ndo_do_ioctl = tsi108_do_ioctl,
+ .ndo_set_mac_address = tsi108_set_mac,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int
tsi108_init_one(struct platform_device *pdev)
{
data->phy_type = einfo->phy_type;
data->irq_num = einfo->irq_num;
data->id = pdev->id;
- dev->open = tsi108_open;
- dev->stop = tsi108_close;
- dev->hard_start_xmit = tsi108_send_packet;
- dev->set_mac_address = tsi108_set_mac;
- dev->set_multicast_list = tsi108_set_rx_mode;
- dev->get_stats = tsi108_get_stats;
netif_napi_add(dev, &data->napi, tsi108_poll, 64);
- dev->do_ioctl = tsi108_do_ioctl;
+ dev->netdev_ops = &tsi108_netdev_ops;
dev->ethtool_ops = &tsi108_ethtool_ops;
/* Apparently, the Linux networking code won't use scatter-gather
atomic_t count;
struct tun_struct *tun;
struct net *net;
- wait_queue_head_t read_wait;
};
struct tun_sock;
tfile->tun = tun;
tun->tfile = tfile;
dev_hold(tun->dev);
+ sock_hold(tun->sk);
atomic_inc(&tfile->count);
out:
static void __tun_detach(struct tun_struct *tun)
{
- struct tun_file *tfile = tun->tfile;
-
/* Detach from net device */
netif_tx_lock_bh(tun->dev);
- tfile->tun = NULL;
tun->tfile = NULL;
netif_tx_unlock_bh(tun->dev);
/* Inform the methods they need to stop using the dev.
*/
if (tfile) {
- wake_up_all(&tfile->read_wait);
+ wake_up_all(&tun->socket.wait);
if (atomic_dec_and_test(&tfile->count))
__tun_detach(tun);
}
}
+static void tun_free_netdev(struct net_device *dev)
+{
+ struct tun_struct *tun = netdev_priv(dev);
+
+ sock_put(tun->sk);
+}
+
/* Net device open. */
static int tun_net_open(struct net_device *dev)
{
/* Notify and wake up reader process */
if (tun->flags & TUN_FASYNC)
kill_fasync(&tun->fasync, SIGIO, POLL_IN);
- wake_up_interruptible(&tun->tfile->read_wait);
+ wake_up_interruptible(&tun->socket.wait);
return 0;
drop:
DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
- poll_wait(file, &tfile->read_wait, wait);
+ poll_wait(file, &tun->socket.wait, wait);
if (!skb_queue_empty(&tun->readq))
mask |= POLLIN | POLLRDNORM;
int err;
/* Under a page? Don't bother with paged skb. */
- if (prepad + len < PAGE_SIZE)
+ if (prepad + len < PAGE_SIZE || !linear)
linear = len;
skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock,
if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) {
align = NET_IP_ALIGN;
- if (unlikely(len < ETH_HLEN))
+ if (unlikely(len < ETH_HLEN ||
+ (gso.hdr_len && gso.hdr_len < ETH_HLEN)))
return -EINVAL;
}
goto out;
}
- add_wait_queue(&tfile->read_wait, &wait);
+ add_wait_queue(&tun->socket.wait, &wait);
while (len) {
current->state = TASK_INTERRUPTIBLE;
}
current->state = TASK_RUNNING;
- remove_wait_queue(&tfile->read_wait, &wait);
+ remove_wait_queue(&tun->socket.wait, &wait);
out:
tun_put(tun);
tun->group = -1;
dev->ethtool_ops = &tun_ethtool_ops;
- dev->destructor = free_netdev;
+ dev->destructor = tun_free_netdev;
}
/* Trivial set of netlink ops to allow deleting tun or tap
static void tun_sock_destruct(struct sock *sk)
{
- dev_put(container_of(sk, struct tun_sock, sk)->tun->dev);
+ free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev);
}
static struct proto tun_proto = {
struct sock *sk;
struct tun_struct *tun;
struct net_device *dev;
- struct tun_file *tfile = file->private_data;
int err;
dev = __dev_get_by_name(net, ifr->ifr_name);
if (!sk)
goto err_free_dev;
- /* This ref count is for tun->sk. */
- dev_hold(dev);
+ init_waitqueue_head(&tun->socket.wait);
sock_init_data(&tun->socket, sk);
sk->sk_write_space = tun_sock_write_space;
- sk->sk_destruct = tun_sock_destruct;
sk->sk_sndbuf = INT_MAX;
- sk->sk_sleep = &tfile->read_wait;
tun->sk = sk;
container_of(sk, struct tun_sock, sk)->tun = tun;
err = -EINVAL;
err = register_netdevice(tun->dev);
if (err < 0)
- goto err_free_dev;
+ goto err_free_sk;
+
+ sk->sk_destruct = tun_sock_destruct;
err = tun_attach(tun, file);
if (err < 0)
- goto err_free_dev;
+ goto failed;
}
DBG(KERN_INFO "%s: tun_set_iff\n", tun->dev->name);
atomic_set(&tfile->count, 0);
tfile->tun = NULL;
tfile->net = get_net(current->nsproxy->net_ns);
- init_waitqueue_head(&tfile->read_wait);
file->private_data = tfile;
return 0;
}
__tun_detach(tun);
/* If desireable, unregister the netdevice. */
- if (!(tun->flags & TUN_PERSIST)) {
- sock_put(tun->sk);
+ if (!(tun->flags & TUN_PERSIST))
unregister_netdevice(tun->dev);
- }
rtnl_unlock();
}
+ tun = tfile->tun;
+ if (tun)
+ sock_put(tun->sk);
+
put_net(tfile->net);
kfree(tfile);
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
(ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
- upsmr |= UCC_GETH_UPSMR_RPM;
+ if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII)
+ upsmr |= UCC_GETH_UPSMR_RPM;
switch (ugeth->max_speed) {
case SPEED_10:
upsmr |= UCC_GETH_UPSMR_R10M;
IEEE 802 "local assignment" bit is set in the address, a "usbX"
name is used instead.
+config USB_NET_CDC_EEM
+ tristate "CDC EEM support"
+ depends on USB_USBNET && EXPERIMENTAL
+ help
+ This option supports devices conforming to the Communication Device
+ Class (CDC) Ethernet Emulation Model, a specification that's easy to
+ implement in device firmware. The CDC EEM specifications are available
+ from <http://www.usb.org/>.
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use. However, if the
+ IEEE 802 "local assignment" bit is set in the address, a "usbX"
+ name is used instead.
+
config USB_NET_DM9601
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
obj-$(CONFIG_USB_HSO) += hso.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
--- /dev/null
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD 2 /* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+ dev_kfree_skb(urb->context);
+ usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct urb *urb;
+ int status;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ goto fail;
+
+ usb_fill_bulk_urb(urb, dev->udev, dev->out,
+ skb->data, skb->len, eem_linkcmd_complete, skb);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ usb_free_urb(urb);
+fail:
+ dev_kfree_skb(skb);
+ devwarn(dev, "link cmd failure\n");
+ return;
+ }
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status = 0;
+
+ status = usbnet_get_endpoints(dev, intf);
+ if (status < 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(driver_of(intf), intf);
+ return status;
+ }
+
+ /* no jumbogram (16K) support for now */
+
+ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+ return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ struct sk_buff *skb2 = NULL;
+ u16 len = skb->len;
+ u32 crc = 0;
+ int padlen = 0;
+
+ /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+ * zero, stick two bytes of zero length EEM packet on the end.
+ * Else the framework would add invalid single byte padding,
+ * since it can't know whether ZLPs will be handled right by
+ * all the relevant hardware and software.
+ */
+ if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+ padlen += 2;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((tailroom >= ETH_FCS_LEN + padlen)
+ && (headroom >= EEM_HEAD))
+ goto done;
+
+ if ((headroom + tailroom)
+ > (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+ skb->data = memmove(skb->head +
+ EEM_HEAD,
+ skb->data,
+ skb->len);
+ skb_set_tail_pointer(skb, len);
+ goto done;
+ }
+ }
+
+ skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+ if (!skb2)
+ return NULL;
+
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+
+done:
+ /* we don't use the "no Ethernet CRC" option */
+ crc = crc32_le(~0, skb->data, skb->len);
+ crc = ~crc;
+
+ put_unaligned_le32(crc, skb_put(skb, 4));
+
+ /* EEM packet header format:
+ * b0..13: length of ethernet frame
+ * b14: bmCRC (1 == valid Ethernet CRC)
+ * b15: bmType (0 == data)
+ */
+ len = skb->len;
+ put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+ /* Bundle a zero length EEM packet if needed */
+ if (padlen)
+ put_unaligned_le16(0, skb_put(skb, 2));
+
+ return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /*
+ * Our task here is to strip off framing, leaving skb with one
+ * data frame for the usbnet framework code to process. But we
+ * may have received multiple EEM payloads, or command payloads.
+ * So we must process _everything_ as if it's a header, except
+ * maybe the last data payload
+ *
+ * REVISIT the framework needs updating so that when we consume
+ * all payloads (the last or only message was a command, or a
+ * zero length EEM packet) that is not accounted as an rx_error.
+ */
+ do {
+ struct sk_buff *skb2 = NULL;
+ u16 header;
+ u16 len = 0;
+
+ /* incomplete EEM header? */
+ if (skb->len < EEM_HEAD)
+ return 0;
+
+ /*
+ * EEM packet header format:
+ * b0..14: EEM type dependant (Data or Command)
+ * b15: bmType
+ */
+ header = get_unaligned_le16(skb->data);
+ skb_pull(skb, EEM_HEAD);
+
+ /*
+ * The bmType bit helps to denote when EEM
+ * packet is data or command :
+ * bmType = 0 : EEM data payload
+ * bmType = 1 : EEM (link) command
+ */
+ if (header & BIT(15)) {
+ u16 bmEEMCmd;
+
+ /*
+ * EEM (link) command packet:
+ * b0..10: bmEEMCmdParam
+ * b11..13: bmEEMCmd
+ * b14: bmReserved (must be 0)
+ * b15: 1 (EEM command)
+ */
+ if (header & BIT(14)) {
+ devdbg(dev, "reserved command %04x\n", header);
+ continue;
+ }
+
+ bmEEMCmd = (header >> 11) & 0x7;
+ switch (bmEEMCmd) {
+
+ /* Responding to echo requests is mandatory. */
+ case 0: /* Echo command */
+ len = header & 0x7FF;
+
+ /* bogus command? */
+ if (skb->len < len)
+ return 0;
+
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ goto next;
+ skb_trim(skb2, len);
+ put_unaligned_le16(BIT(15) | (1 << 11) | len,
+ skb_push(skb2, 2));
+ eem_linkcmd(dev, skb2);
+ break;
+
+ /*
+ * Host may choose to ignore hints.
+ * - suspend: peripheral ready to suspend
+ * - response: suggest N millisec polling
+ * - response complete: suggest N sec polling
+ */
+ case 2: /* Suspend hint */
+ case 3: /* Response hint */
+ case 4: /* Response complete hint */
+ continue;
+
+ /*
+ * Hosts should never receive host-to-peripheral
+ * or reserved command codes; or responses to an
+ * echo command we didn't send.
+ */
+ case 1: /* Echo response */
+ case 5: /* Tickle */
+ default: /* reserved */
+ devwarn(dev, "unexpected link command %d\n",
+ bmEEMCmd);
+ continue;
+ }
+
+ } else {
+ u32 crc, crc2;
+ int is_last;
+
+ /* zero length EEM packet? */
+ if (header == 0)
+ continue;
+
+ /*
+ * EEM data packet header :
+ * b0..13: length of ethernet frame
+ * b14: bmCRC
+ * b15: 0 (EEM data)
+ */
+ len = header & 0x3FFF;
+
+ /* bogus EEM payload? */
+ if (skb->len < len)
+ return 0;
+
+ /* bogus ethernet frame? */
+ if (len < (ETH_HLEN + ETH_FCS_LEN))
+ goto next;
+
+ /*
+ * Treat the last payload differently: framework
+ * code expects our "fixup" to have stripped off
+ * headers, so "skb" is a data packet (or error).
+ * Else if it's not the last payload, keep "skb"
+ * for further processing.
+ */
+ is_last = (len == skb->len);
+ if (is_last)
+ skb2 = skb;
+ else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ return 0;
+ }
+
+ crc = get_unaligned_le32(skb2->data
+ + len - ETH_FCS_LEN);
+ skb_trim(skb2, len - ETH_FCS_LEN);
+
+ /*
+ * The bmCRC helps to denote when the CRC field in
+ * the Ethernet frame contains a calculated CRC:
+ * bmCRC = 1 : CRC is calculated
+ * bmCRC = 0 : CRC = 0xDEADBEEF
+ */
+ if (header & BIT(14))
+ crc2 = ~crc32_le(~0, skb2->data, len);
+ else
+ crc2 = 0xdeadbeef;
+
+ if (is_last)
+ return crc == crc2;
+
+ if (unlikely(crc != crc2)) {
+ dev->stats.rx_errors++;
+ dev_kfree_skb_any(skb2);
+ } else
+ usbnet_skb_return(dev, skb2);
+ }
+
+next:
+ skb_pull(skb, len);
+ } while (skb->len);
+
+ return 1;
+}
+
+static const struct driver_info eem_info = {
+ .description = "CDC EEM Device",
+ .flags = FLAG_ETHER,
+ .bind = eem_bind,
+ .rx_fixup = eem_rx_fixup,
+ .tx_fixup = eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+ USB_CDC_PROTO_EEM),
+ .driver_info = (unsigned long) &eem_info,
+},
+{
+ /* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+ .name = "cdc_eem",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+
+static int __init eem_init(void)
+{
+ return usb_register(&eem_driver);
+}
+module_init(eem_init);
+
+static void __exit eem_exit(void)
+{
+ usb_deregister(&eem_driver);
+}
+module_exit(eem_exit);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");
/* cleanup should already have been scheduled */
break;
case -ENODEV: /* disconnect() upcoming */
+ case -EPERM:
netif_device_detach(pegasus->net);
break;
default:
if (netif_msg_ifup(dev))
devdbg(dev, "ID_REV = 0x%08x", read_buf);
+ /* Configure GPIO pins as LED outputs */
+ write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+ LED_GPIO_CFG_FDX_LED;
+ ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+ if (ret < 0) {
+ devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d",
+ ret);
+ return ret;
+ }
+
/* Init Tx */
write_buf = 0;
ret = smsc95xx_write_reg(dev, FLOW, write_buf);
USB_DEVICE(0x0424, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device */
+ USB_DEVICE(0x0424, 0xec00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
#define PM_CTL_WUPS_MULTI_ (0x00000003)
#define LED_GPIO_CFG (0x24)
+#define LED_GPIO_CFG_SPD_LED (0x01000000)
+#define LED_GPIO_CFG_LNK_LED (0x00100000)
+#define LED_GPIO_CFG_FDX_LED (0x00010000)
#define GPIO_CFG (0x28)
static struct net_device_stats *veth_get_stats(struct net_device *dev)
{
- struct veth_priv *priv;
- struct net_device_stats *dev_stats;
- int cpu;
+ struct veth_priv *priv = netdev_priv(dev);
+ struct net_device_stats *dev_stats = &dev->stats;
+ unsigned int cpu;
struct veth_net_stats *stats;
- priv = netdev_priv(dev);
- dev_stats = &dev->stats;
-
dev_stats->rx_packets = 0;
dev_stats->tx_packets = 0;
dev_stats->rx_bytes = 0;
dev_stats->tx_dropped = 0;
dev_stats->rx_dropped = 0;
- for_each_online_cpu(cpu) {
- stats = per_cpu_ptr(priv->stats, cpu);
+ if (priv->stats)
+ for_each_online_cpu(cpu) {
+ stats = per_cpu_ptr(priv->stats, cpu);
- dev_stats->rx_packets += stats->rx_packets;
- dev_stats->tx_packets += stats->tx_packets;
- dev_stats->rx_bytes += stats->rx_bytes;
- dev_stats->tx_bytes += stats->tx_bytes;
- dev_stats->tx_dropped += stats->tx_dropped;
- dev_stats->rx_dropped += stats->rx_dropped;
- }
+ dev_stats->rx_packets += stats->rx_packets;
+ dev_stats->tx_packets += stats->tx_packets;
+ dev_stats->rx_bytes += stats->rx_bytes;
+ dev_stats->tx_bytes += stats->tx_bytes;
+ dev_stats->tx_dropped += stats->tx_dropped;
+ dev_stats->rx_dropped += stats->rx_dropped;
+ }
return dev_stats;
}
netif_carrier_off(dev);
netif_carrier_off(priv->peer);
+ free_percpu(priv->stats);
+ priv->stats = NULL;
return 0;
}
return 0;
}
-static void veth_dev_free(struct net_device *dev)
-{
- struct veth_priv *priv;
-
- priv = netdev_priv(dev);
- free_percpu(priv->stats);
- free_netdev(dev);
-}
-
static const struct net_device_ops veth_netdev_ops = {
.ndo_init = veth_dev_init,
.ndo_open = veth_open,
dev->netdev_ops = &veth_netdev_ops;
dev->ethtool_ops = &veth_ethtool_ops;
dev->features |= NETIF_F_LLTX;
- dev->destructor = veth_dev_free;
+ dev->destructor = free_netdev;
}
/*
static int velocity_open(struct net_device *dev);
static int velocity_change_mtu(struct net_device *dev, int mtu);
static int velocity_xmit(struct sk_buff *skb, struct net_device *dev);
-static int velocity_intr(int irq, void *dev_instance);
+static irqreturn_t velocity_intr(int irq, void *dev_instance);
static void velocity_set_multi(struct net_device *dev);
static struct net_device_stats *velocity_get_stats(struct net_device *dev);
static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
* efficiently as possible.
*/
-static int velocity_intr(int irq, void *dev_instance)
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
{
struct net_device *dev = dev_instance;
struct velocity_info *vptr = netdev_priv(dev);
static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
struct scatterlist *data, int out, int in)
{
- struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
+ struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
struct virtio_net_ctrl_hdr ctrl;
virtio_net_ctrl_ack status = ~0;
unsigned int tmp;
+ int i;
if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
BUG(); /* Caller should know better */
sg_init_table(sg, out + in);
sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
- memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2));
+ for_each_sg(data, s, out + in - 2, i)
+ sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
promisc = ((dev->flags & IFF_PROMISC) != 0);
allmulti = ((dev->flags & IFF_ALLMULTI) != 0);
- sg_set_buf(sg, &promisc, sizeof(promisc));
+ sg_init_one(sg, &promisc, sizeof(promisc));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
VIRTIO_NET_CTRL_RX_PROMISC,
dev_warn(&dev->dev, "Failed to %sable promisc mode.\n",
promisc ? "en" : "dis");
- sg_set_buf(sg, &allmulti, sizeof(allmulti));
+ sg_init_one(sg, &allmulti, sizeof(allmulti));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
VIRTIO_NET_CTRL_RX_ALLMULTI,
return;
}
+ sg_init_table(sg, 2);
+
/* Store the unicast list and count in the front of the buffer */
mac_data->entries = dev->uc_count;
addr = dev->uc_list;
kfree(buf);
}
-static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
{
struct virtnet_info *vi = netdev_priv(dev);
struct scatterlist sg;
- sg_set_buf(&sg, &vid, sizeof(vid));
+ sg_init_one(&sg, &vid, sizeof(vid));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0))
dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
}
-static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
{
struct virtnet_info *vi = netdev_priv(dev);
struct scatterlist sg;
- sg_set_buf(&sg, &vid, sizeof(vid));
+ sg_init_one(&sg, &vid, sizeof(vid));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0))
.ndo_set_mac_address = virtnet_set_mac_address,
.ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
- .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid,
+ .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
#endif
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON|
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON|
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR|
- VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32),
+ VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32),
&vp_reg->kdfcctl_errors_mask);
__vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask);
return -ENOMEM;
if ((port->npe = npe_request(0)) == NULL) {
- err = -ENOSYS;
+ err = -ENODEV;
goto err_free;
}
if ((ixp4xx_read_feature_bits() &
(IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
(IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
- return -ENOSYS;
+ return -ENODEV;
spin_lock_init(&npe_lock);
roq_data = (struct i2400m_roq_data *) &skb->cb;
i2400m_net_erx(i2400m, skb, roq_data->cs);
}
- else {
+ else
__i2400m_roq_queue(i2400m, roq, skb, sn, nsn);
- __i2400m_roq_update_ws(i2400m, roq, sn + 1);
- }
+ __i2400m_roq_update_ws(i2400m, roq, sn + 1);
i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS,
old_ws, len, sn, nsn, roq->ws);
}
#ifdef CONFIG_PM
struct usb_device *usb_dev = i2400mu->usb_dev;
#endif
+ unsigned is_autosuspend = 0;
struct i2400m *i2400m = &i2400mu->i2400m;
+#ifdef CONFIG_PM
+ if (usb_dev->auto_pm > 0)
+ is_autosuspend = 1;
+#endif
+
d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
if (i2400m->updown == 0)
goto no_firmware;
- d_printf(1, dev, "fw up, requesting standby\n");
+ if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
+ /* ugh -- the device is connected and this suspend
+ * request is an autosuspend one (not a system standby
+ * / hibernate).
+ *
+ * The only way the device can go to standby is if the
+ * link with the base station is in IDLE mode; that
+ * were the case, we'd be in status
+ * I2400M_SS_CONNECTED_IDLE. But we are not.
+ *
+ * If we *tell* him to go power save now, it'll reset
+ * as a precautionary measure, so if this is an
+ * autosuspend thing, say no and it'll come back
+ * later, when the link is IDLE
+ */
+ result = -EBADF;
+ d_printf(1, dev, "fw up, link up, not-idle, autosuspend: "
+ "not entering powersave\n");
+ goto error_not_now;
+ }
+ d_printf(1, dev, "fw up: entering powersave\n");
atomic_dec(&i2400mu->do_autopm);
result = i2400m_cmd_enter_powersave(i2400m);
atomic_inc(&i2400mu->do_autopm);
-#ifdef CONFIG_PM
- if (result < 0 && usb_dev->auto_pm == 0) {
+ if (result < 0 && !is_autosuspend) {
/* System suspend, can't fail */
dev_err(dev, "failed to suspend, will reset on resume\n");
result = 0;
}
-#endif
if (result < 0)
goto error_enter_powersave;
i2400mu_notification_release(i2400mu);
- d_printf(1, dev, "fw up, got standby\n");
+ d_printf(1, dev, "powersave requested\n");
error_enter_powersave:
+error_not_now:
no_firmware:
d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n",
iface, pm_msg.event, result);
ASUS P5B Deluxe
Toshiba Satellite Pro series of laptops
Asus Wireless Link
+ Linksys WUSB54GC-EU
Thanks to Realtek for their support!
{
struct airo_info *local = dev->ml_priv;
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ int wep_key_len;
u8 buf[16];
if (!local->wep_capable)
dwrq->flags |= index + 1;
/* Copy the key to the user buffer */
- dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
- memcpy(extra, buf, dwrq->length);
+ wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf));
+ if (wep_key_len < 0) {
+ dwrq->length = 0;
+ } else {
+ dwrq->length = wep_key_len;
+ memcpy(extra, buf, dwrq->length);
+ }
return 0;
}
struct airo_info *local = dev->ml_priv;
struct iw_point *encoding = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, max_key_len;
+ int idx, max_key_len, wep_key_len;
u8 buf[16];
if (!local->wep_capable)
memset(extra, 0, 16);
/* Copy the key to the user buffer */
- ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
- memcpy(extra, buf, ext->key_len);
+ wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
+ if (wep_key_len < 0) {
+ ext->key_len = 0;
+ } else {
+ ext->key_len = wep_key_len;
+ memcpy(extra, buf, ext->key_len);
+ }
return 0;
}
local->config.authType = AUTH_ENCRYPT;
} else
return -EINVAL;
- break;
/* Commit the changes to flags if needed */
if (local->config.authType != currentAuthType)
set_bit (FLAG_COMMIT, &local->flags);
+ break;
}
case IW_AUTH_WPA_ENABLED:
struct ar9170_rx_head {
u8 plcp[12];
-};
+} __packed;
struct ar9170_rx_tail {
union {
u8 rssi_ant0, rssi_ant1, rssi_ant2,
rssi_ant0x, rssi_ant1x, rssi_ant2x,
rssi_combined;
- };
+ } __packed;
u8 rssi[7];
- };
+ } __packed;
u8 evm_stream0[6], evm_stream1[6];
u8 phy_err;
u8 SAidx, DAidx;
u8 error;
u8 status;
-};
+} __packed;
#define AR9170_ENC_ALG_NONE 0x0
#define AR9170_ENC_ALG_WEP64 0x1
{ USB_DEVICE(0x0cf3, 0x9170) },
/* Atheros TG121N */
{ USB_DEVICE(0x0cf3, 0x1001) },
+ /* Cace Airpcap NX */
+ { USB_DEVICE(0xcace, 0x0300) },
/* D-Link DWA 160A */
{ USB_DEVICE(0x07d1, 0x3c10) },
/* Netgear WNDA3100 */
{ USB_DEVICE(0x0846, 0x9001) },
/* Zydas ZD1221 */
{ USB_DEVICE(0x0ace, 0x1221) },
+ /* ZyXEL NWD271N */
+ { USB_DEVICE(0x0586, 0x3417) },
/* Z-Com UB81 BG */
{ USB_DEVICE(0x0cde, 0x0023) },
/* Z-Com UB82 ABG */
return 0;
}
+static int ar9170_usb_init_device(struct ar9170_usb *aru)
+{
+ int err;
+
+ err = ar9170_usb_alloc_rx_irq_urb(aru);
+ if (err)
+ goto err_out;
+
+ err = ar9170_usb_alloc_rx_bulk_urbs(aru);
+ if (err)
+ goto err_unrx;
+
+ err = ar9170_usb_upload_firmware(aru);
+ if (err) {
+ err = ar9170_echo_test(&aru->common, 0x60d43110);
+ if (err) {
+ /* force user invention, by disabling the device */
+ err = usb_driver_set_configuration(aru->udev, -1);
+ dev_err(&aru->udev->dev, "device is in a bad state. "
+ "please reconnect it!\n");
+ goto err_unrx;
+ }
+ }
+
+ return 0;
+
+err_unrx:
+ ar9170_usb_cancel_urbs(aru);
+
+err_out:
+ return err;
+}
+
static int ar9170_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
err = ar9170_usb_reset(aru);
if (err)
- goto err_unlock;
+ goto err_freehw;
err = ar9170_usb_request_firmware(aru);
if (err)
- goto err_unlock;
+ goto err_freehw;
- err = ar9170_usb_alloc_rx_irq_urb(aru);
+ err = ar9170_usb_init_device(aru);
if (err)
goto err_freefw;
- err = ar9170_usb_alloc_rx_bulk_urbs(aru);
- if (err)
- goto err_unrx;
-
- err = ar9170_usb_upload_firmware(aru);
- if (err) {
- err = ar9170_echo_test(&aru->common, 0x60d43110);
- if (err) {
- /* force user invention, by disabling the device */
- err = usb_driver_set_configuration(aru->udev, -1);
- dev_err(&aru->udev->dev, "device is in a bad state. "
- "please reconnect it!\n");
- goto err_unrx;
- }
- }
-
err = ar9170_usb_open(ar);
if (err)
goto err_unrx;
release_firmware(aru->init_values);
release_firmware(aru->firmware);
-err_unlock:
+err_freehw:
usb_set_intfdata(intf, NULL);
usb_put_dev(udev);
ieee80211_free_hw(ar->hw);
ieee80211_free_hw(aru->common.hw);
}
+#ifdef CONFIG_PM
+static int ar9170_suspend(struct usb_interface *intf,
+ pm_message_t message)
+{
+ struct ar9170_usb *aru = usb_get_intfdata(intf);
+
+ if (!aru)
+ return -ENODEV;
+
+ aru->common.state = AR9170_IDLE;
+ ar9170_usb_cancel_urbs(aru);
+
+ return 0;
+}
+
+static int ar9170_resume(struct usb_interface *intf)
+{
+ struct ar9170_usb *aru = usb_get_intfdata(intf);
+ int err;
+
+ if (!aru)
+ return -ENODEV;
+
+ usb_unpoison_anchored_urbs(&aru->rx_submitted);
+ usb_unpoison_anchored_urbs(&aru->tx_submitted);
+
+ /*
+ * FIXME: firmware upload will fail on resume.
+ * but this is better than a hang!
+ */
+
+ err = ar9170_usb_init_device(aru);
+ if (err)
+ goto err_unrx;
+
+ err = ar9170_usb_open(&aru->common);
+ if (err)
+ goto err_unrx;
+
+ return 0;
+
+err_unrx:
+ aru->common.state = AR9170_IDLE;
+ ar9170_usb_cancel_urbs(aru);
+
+ return err;
+}
+#endif /* CONFIG_PM */
+
static struct usb_driver ar9170_driver = {
.name = "ar9170usb",
.probe = ar9170_usb_probe,
.disconnect = ar9170_usb_disconnect,
.id_table = ar9170_usb_ids,
.soft_unbind = 1,
+#ifdef CONFIG_PM
+ .suspend = ar9170_suspend,
+ .resume = ar9170_resume,
+#endif /* CONFIG_PM */
};
static int __init ar9170_init(void)
{ USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
/* Siemens Gigaset USB WLAN Adapter 11 */
{ USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
+ /* OQO Model 01+ Internal Wi-Fi */
+ { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
/*
* at76c505amx-rfmd
*/
if (ret != CMD_STATUS_COMPLETE) {
queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
SCAN_POLL_INTERVAL);
- goto exit;
+ mutex_unlock(&priv->mtx);
+ return;
}
- ieee80211_scan_completed(priv->hw, false);
-
if (is_valid_ether_addr(priv->bssid))
at76_join(priv);
- ieee80211_wake_queues(priv->hw);
-
-exit:
mutex_unlock(&priv->mtx);
+
+ ieee80211_scan_completed(priv->hw, false);
+
+ ieee80211_wake_queues(priv->hw);
}
static int at76_hw_scan(struct ieee80211_hw *hw,
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
if (chan->center_freq != sc->curchan->center_freq ||
chan->hw_value != sc->curchan->hw_value) {
- sc->curchan = chan;
- sc->curband = &sc->sbands[chan->band];
-
/*
* To switch channels clear any pending DMA operations;
* wait long enough for the RX fifo to drain, reset the
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- return ath5k_reset(sc, true, true);
+ return ath5k_reset(sc, chan);
}
return 0;
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
AR5K_INT_FATAL | AR5K_INT_GLOBAL;
- ret = ath5k_reset(sc, false, false);
+ ret = ath5k_reset(sc, NULL);
if (ret)
goto done;
return NETDEV_TX_OK;
}
+/*
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ */
static int
-ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
struct ath5k_hw *ah = sc->ah;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
- if (stop) {
+ if (chan) {
ath5k_hw_set_imr(ah, 0);
ath5k_txq_cleanup(sc);
ath5k_rx_stop(sc);
+
+ sc->curchan = chan;
+ sc->curband = &sc->sbands[chan->band];
}
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
if (ret) {
{
int ret;
- ret = ath5k_reset(sc, true, true);
+ ret = ath5k_reset(sc, sc->curchan);
if (!ret)
ieee80211_wake_queues(sc->hw);
for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
struct ieee80211_supported_band *band = &sc->sbands[b];
- char bname[5];
+ char bname[6];
switch (band->band) {
case IEEE80211_BAND_2GHZ:
strcpy(bname, "2 GHz");
{
s8 tmp;
s16 min_pwrL, min_pwrR;
- s16 pwr_i = pwrL[0];
-
- do {
- pwr_i--;
- tmp = (s8) ath5k_get_interpolated_value(pwr_i,
- pwrL[0], pwrL[1],
- stepL[0], stepL[1]);
-
- } while (tmp > 1);
-
- min_pwrL = pwr_i;
-
- pwr_i = pwrR[0];
- do {
- pwr_i--;
- tmp = (s8) ath5k_get_interpolated_value(pwr_i,
- pwrR[0], pwrR[1],
- stepR[0], stepR[1]);
-
- } while (tmp > 1);
+ s16 pwr_i;
+
+ if (pwrL[0] == pwrL[1])
+ min_pwrL = pwrL[0];
+ else {
+ pwr_i = pwrL[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrL[0], pwrL[1],
+ stepL[0], stepL[1]);
+ } while (tmp > 1);
+
+ min_pwrL = pwr_i;
+ }
- min_pwrR = pwr_i;
+ if (pwrR[0] == pwrR[1])
+ min_pwrR = pwrR[0];
+ else {
+ pwr_i = pwrR[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrR[0], pwrR[1],
+ stepR[0], stepR[1]);
+ } while (tmp > 1);
+
+ min_pwrR = pwr_i;
+ }
/* Keep the right boundary so that it works for both curves */
return max(min_pwrL, min_pwrR);
\*****************************/
#include <linux/pci.h> /* To determine if a card is pci-e */
-#include <linux/bitops.h> /* For get_bitmask_order */
+#include <linux/log2.h>
#include "ath5k.h"
#include "reg.h"
#include "base.h"
/* Get exponent
* ALGO: coef_exp = 14 - highest set bit position */
- coef_exp = get_bitmask_order(coef_scaled);
+ coef_exp = ilog2(coef_scaled);
/* Doesn't make sense if it's zero*/
- if (!coef_exp)
+ if (!coef_scaled || !coef_exp)
return -EINVAL;
/* Note: we've shifted coef_scaled by 24 */
mode |= AR5K_PHY_MODE_FREQ_5GHZ;
if (ah->ah_radio == AR5K_RF5413)
- clock |= AR5K_PHY_PLL_40MHZ_5413;
+ clock = AR5K_PHY_PLL_40MHZ_5413;
else
clock |= AR5K_PHY_PLL_40MHZ;
if (pci_enable_device(pdev))
return -EIO;
- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
goto bad;
}
- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
int hdrlen, padsize, retval;
bool decrypt_error = false;
u8 keyix;
+ __le16 fc;
spin_lock_bh(&sc->rx.rxbuflock);
/* see if any padding is done by the hw and remove it */
hdr = (struct ieee80211_hdr *)skb->data;
hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+ fc = hdr->frame_control;
/* The MAC header is padded to have 32-bit boundary if the
* packet payload is non-zero. The general calculation for
sc->rx.rxotherant = 0;
}
- if (ieee80211_is_beacon(hdr->frame_control) &&
+ if (ieee80211_is_beacon(fc) &&
(sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) {
sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
.ndo_set_mac_address = atmel_set_mac_address,
.ndo_start_xmit = start_tx,
.ndo_do_ioctl = atmel_ioctl,
- .ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
};
return 1;
}
+static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb)
+{
+ unsigned char *f = skb->data + ring->frameoffset;
+
+ return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF);
+}
+
+static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb)
+{
+ struct b43_rxhdr_fw4 *rxhdr;
+ unsigned char *frame;
+
+ /* This poisons the RX buffer to detect DMA failures. */
+
+ rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
+ rxhdr->frame_len = 0;
+
+ B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2);
+ frame = skb->data + ring->frameoffset;
+ memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */);
+}
+
static int setup_rx_descbuffer(struct b43_dmaring *ring,
struct b43_dmadesc_generic *desc,
struct b43_dmadesc_meta *meta, gfp_t gfp_flags)
{
- struct b43_rxhdr_fw4 *rxhdr;
dma_addr_t dmaaddr;
struct sk_buff *skb;
skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
if (unlikely(!skb))
return -ENOMEM;
+ b43_poison_rx_buffer(ring, skb);
dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
/* ugh. try to realloc in zone_dma */
skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags);
if (unlikely(!skb))
return -ENOMEM;
+ b43_poison_rx_buffer(ring, skb);
dmaaddr = map_descbuffer(ring, skb->data,
ring->rx_buffersize, 0);
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
ring->ops->fill_descriptor(ring, desc, dmaaddr,
ring->rx_buffersize, 0, 0, 0);
- rxhdr = (struct b43_rxhdr_fw4 *)(skb->data);
- rxhdr->frame_len = 0;
-
return 0;
}
len = le16_to_cpu(rxhdr->frame_len);
} while (len == 0 && i++ < 5);
if (unlikely(len == 0)) {
- /* recycle the descriptor buffer. */
- sync_descbuffer_for_device(ring, meta->dmaaddr,
- ring->rx_buffersize);
- goto drop;
+ dmaaddr = meta->dmaaddr;
+ goto drop_recycle_buffer;
}
}
+ if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) {
+ /* Something went wrong with the DMA.
+ * The device did not touch the buffer and did not overwrite the poison. */
+ b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n");
+ dmaaddr = meta->dmaaddr;
+ goto drop_recycle_buffer;
+ }
if (unlikely(len > ring->rx_buffersize)) {
/* The data did not fit into one descriptor buffer
* and is split over multiple buffers.
while (1) {
desc = ops->idx2desc(ring, *slot, &meta);
/* recycle the descriptor buffer. */
+ b43_poison_rx_buffer(ring, meta->skb);
sync_descbuffer_for_device(ring, meta->dmaaddr,
ring->rx_buffersize);
*slot = next_slot(ring, *slot);
err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC);
if (unlikely(err)) {
b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n");
- sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
- goto drop;
+ goto drop_recycle_buffer;
}
unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
b43_rx(ring->dev, skb, rxhdr);
drop:
return;
+
+drop_recycle_buffer:
+ /* Poison and recycle the RX buffer. */
+ b43_poison_rx_buffer(ring, skb);
+ sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize);
}
void b43_dma_rx(struct b43_dmaring *ring)
phy->next_txpwr_check_time = jiffies;
/* PHY TX errors counter. */
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
+
+#if B43_DEBUG
+ phy->phy_locked = 0;
+ phy->radio_locked = 0;
+#endif
}
static void setup_struct_wldev_for_init(struct b43_wldev *dev)
{
u32 macctl;
+#if B43_DEBUG
+ B43_WARN_ON(dev->phy.radio_locked);
+ dev->phy.radio_locked = 1;
+#endif
+
macctl = b43_read32(dev, B43_MMIO_MACCTL);
- B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK);
macctl |= B43_MACCTL_RADIOLOCK;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
- /* Commit the write and wait for the device
- * to exit any radio register access. */
+ /* Commit the write and wait for the firmware
+ * to finish any radio register access. */
b43_read32(dev, B43_MMIO_MACCTL);
udelay(10);
}
{
u32 macctl;
+#if B43_DEBUG
+ B43_WARN_ON(!dev->phy.radio_locked);
+ dev->phy.radio_locked = 0;
+#endif
+
/* Commit any write */
b43_read16(dev, B43_MMIO_PHY_VER);
/* unlock */
macctl = b43_read32(dev, B43_MMIO_MACCTL);
- B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK));
macctl &= ~B43_MACCTL_RADIOLOCK;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
}
atomic_t txerr_cnt;
#ifdef CONFIG_B43_DEBUG
- /* PHY registers locked by b43_phy_lock()? */
+ /* PHY registers locked (w.r.t. firmware) */
bool phy_locked;
+ /* Radio registers locked (w.r.t. firmware) */
+ bool radio_locked;
#endif /* B43_DEBUG */
};
return -ENOMEM;
}
} else
- iwl_rx_queue_reset(priv, rxq);
+ iwl3945_rx_queue_reset(priv, rxq);
iwl3945_rx_replenish(priv);
extern int iwl3945_tx_queue_init(struct iwl_priv *priv,
struct iwl_tx_queue *txq, int count, u32 id);
extern void iwl3945_rx_replenish(void *data);
+extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq);
extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len,
const void *data);
#include "iwl-6000-hw.h"
/* Highest firmware API version supported */
-#define IWL5000_UCODE_API_MAX 1
+#define IWL5000_UCODE_API_MAX 2
#define IWL5150_UCODE_API_MAX 2
/* Lowest firmware API version supported */
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
};
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
};
if (!iwl_is_ready_rf(priv))
return -EAGAIN;
- cancel_delayed_work(&priv->scan_check);
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- return -EAGAIN;
- }
-
iwl_commit_rxon(priv);
return 0;
rxq->queue[i] = NULL;
- dma_sync_single_range_for_cpu(
- &priv->pci_dev->dev, rxb->real_dma_addr,
- rxb->aligned_dma_addr - rxb->real_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+ priv->hw_params.rx_buf_size + 256,
+ PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Reclaim a command buffer only if this packet is a response
rxb->skb = NULL;
}
- pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
- priv->hw_params.rx_buf_size + 256,
- PCI_DMA_FROMDEVICE);
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
{IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)},
{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)},
{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
/* EEPROM GP */
-#define CSR_EEPROM_GP_VALID_MSK (0x00000006)
+#define CSR_EEPROM_GP_VALID_MSK (0x00000007)
#define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000)
#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
/**
* struct iwl_rx_queue - Rx queue
+ * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
+ * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
* @read: Shared index to newest available Rx buffer
* @write: Shared index to oldest written Rx packet
* @free_count: Number of pre-allocated buffers in rx_free
* @rx_free: list of free SKBs for use
* @rx_used: List of Rx buffers with no SKB
* @need_update: flag to indicate we need to update read/write index
+ * @rb_stts: driver's pointer to receive buffer status
+ * @rb_stts_dma: bus address of receive buffer status
*
* NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
*/
/* The HW is no longer scanning */
clear_bit(STATUS_SCAN_HW, &priv->status);
- /* The scan completion notification came in, so kill that timer... */
- cancel_delayed_work(&priv->scan_check);
-
IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
(priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
"2.4" : "5.2",
mutex_lock(&priv->mutex);
+ cancel_delayed_work(&priv->scan_check);
+
if (!iwl_is_ready(priv)) {
IWL_WARN(priv, "request scan called when driver not ready.\n");
goto done;
IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
+ cancel_delayed_work(&priv->scan_check);
ieee80211_scan_completed(priv->hw, false);
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
/* Since setting the TXPOWER may have been deferred while
* performing the scan, fire one off */
mutex_lock(&priv->mutex);
{
unsigned long flags;
int ret = 0;
+ __le16 key_flags = 0;
+
+ key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
+ key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+ key_flags &= ~STA_KEY_FLG_INVALID;
+
+ if (sta_id == priv->hw_params.bcast_sta_id)
+ key_flags |= STA_KEY_MULTICAST_MSK;
keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
"no space for a new key");
+ priv->stations[sta_id].sta.key.key_flags = key_flags;
+
+
/* This copy is acutally not needed: we get the key with each TX */
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
{
u8 sta_id = IWL_INVALID_STATION;
unsigned long flags;
- __le16 key_flags = 0;
int i;
- DECLARE_MAC_BUF(mac);
sta_id = iwl_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION) {
return;
}
- key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
- key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
- key_flags &= ~STA_KEY_FLG_INVALID;
-
- if (sta_id == priv->hw_params.bcast_sta_id)
- key_flags |= STA_KEY_MULTICAST_MSK;
-
spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
for (i = 0; i < 5; i++)
/* Copy MAC header from skb into command buffer */
memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+ /* Total # bytes to be transmitted */
+ len = (u16)skb->len;
+ tx_cmd->len = cpu_to_le16(len);
+
+ if (info->control.hw_key)
+ iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+
+ /* TODO need this for burst mode later on */
+ iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
+
+ /* set is_hcca to 0; it probably will never be implemented */
+ iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+
+ iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
+
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
else
len_org = 0;
+ /* Tell NIC about any 2-byte padding after MAC header */
+ if (len_org)
+ tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
+
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
txcmd_phys = pci_map_single(priv->pci_dev,
- out_cmd, sizeof(struct iwl_cmd),
+ &out_cmd->hdr, len,
PCI_DMA_BIDIRECTIONAL);
pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
- pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
+ pci_unmap_len_set(&out_cmd->meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
- txcmd_phys += offsetof(struct iwl_cmd, hdr);
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
txcmd_phys, len, 1, 0);
- if (info->control.hw_key)
- iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
+ txq->need_update = 1;
+ if (qc)
+ priv->stations[sta_id].tid[tid].seq_number = seq_number;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
0, 0);
}
- /* Tell NIC about any 2-byte padding after MAC header */
- if (len_org)
- tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
-
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx_cmd->len = cpu_to_le16(len);
- /* TODO need this for burst mode later on */
- iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
-
- iwl_update_tx_stats(priv, le16_to_cpu(fc), len);
-
scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
- offsetof(struct iwl_tx_cmd, scratch);
+ offsetof(struct iwl_tx_cmd, scratch);
+
+ len = sizeof(struct iwl_tx_cmd) +
+ sizeof(struct iwl_cmd_header) + hdr_len;
+ /* take back ownership of DMA buffer to enable update */
+ pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys,
+ len, PCI_DMA_BIDIRECTIONAL);
tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- if (qc)
- priv->stations[sta_id].tid[tid].seq_number = seq_number;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
+ IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+ le16_to_cpu(out_cmd->hdr.sequence));
+ IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd));
-
iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
/* Set up entry for this TFD in Tx byte-count array */
- priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len);
+ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+ le16_to_cpu(tx_cmd->len));
+
+ pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
+ len, PCI_DMA_BIDIRECTIONAL);
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
INDEX_TO_SEQ(q->write_ptr));
if (out_cmd->meta.flags & CMD_SIZE_HUGE)
out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
- len = (idx == TFD_CMD_SLOTS) ?
- IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
-
- phys_addr = pci_map_single(priv->pci_dev, out_cmd,
- len, PCI_DMA_BIDIRECTIONAL);
- pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
- pci_unmap_len_set(&out_cmd->meta, len, len);
- phys_addr += offsetof(struct iwl_cmd, hdr);
+ len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta);
+ len += (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : 0;
- priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
- phys_addr, fix_size, 1,
- U32_PAD(cmd->len));
#ifdef CONFIG_IWLWIFI_DEBUG
switch (out_cmd->hdr.cmd) {
/* Set up entry in queue's byte count circular buffer */
priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0);
+ phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+ fix_size, PCI_DMA_BIDIRECTIONAL);
+ pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr);
+ pci_unmap_len_set(&out_cmd->meta, len, fix_size);
+
+ priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
+ phys_addr, fix_size, 1,
+ U32_PAD(cmd->len));
+
/* Increment and update queue's write index */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
ret = iwl_txq_update_write_ptr(priv, txq);
if (!iwl_is_ready_rf(priv))
return -EAGAIN;
- cancel_delayed_work(&priv->scan_check);
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- return -EAGAIN;
- }
-
iwl3945_commit_rxon(priv);
return 0;
dma_addr_t phys_addr;
dma_addr_t txcmd_phys;
int txq_id = skb_get_queue_mapping(skb);
- u16 len, idx, len_org, hdr_len;
+ u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */
u8 id;
u8 unicast;
u8 sta_id;
/* Copy MAC header from skb into command buffer */
memcpy(tx->hdr, hdr, hdr_len);
+
+ if (info->control.hw_key)
+ iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
+
+ /* TODO need this for burst mode later on */
+ iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
+
+ /* set is_hcca to 0; it probably will never be implemented */
+ iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
+
+ /* Total # bytes to be transmitted */
+ len = (u16)skb->len;
+ tx->len = cpu_to_le16(len);
+
+
+ tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+ tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
+ txq->need_update = 1;
+ if (qc)
+ priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
+
+ IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
+ le16_to_cpu(out_cmd->hdr.sequence));
+ IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
+ iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
+ iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+ ieee80211_hdrlen(fc));
+
/*
* Use the first empty entry in this queue's command buffer array
* to contain the Tx command and MAC header concatenated together
/* Physical address of this Tx command's header (not MAC header!),
* within command buffer array. */
- txcmd_phys = pci_map_single(priv->pci_dev,
- out_cmd, sizeof(struct iwl_cmd),
- PCI_DMA_TODEVICE);
+ txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
+ len, PCI_DMA_TODEVICE);
+ /* we do not map meta data ... so we can safely access address to
+ * provide to unmap command*/
pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys);
- pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd));
- /* Add buffer containing Tx command and MAC(!) header to TFD's
- * first entry */
- txcmd_phys += offsetof(struct iwl_cmd, hdr);
+ pci_unmap_len_set(&out_cmd->meta, len, len);
/* Add buffer containing Tx command and MAC(!) header to TFD's
* first entry */
priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
txcmd_phys, len, 1, 0);
- if (info->control.hw_key)
- iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id);
/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
0, U32_PAD(len));
}
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx->len = cpu_to_le16(len);
-
- /* TODO need this for burst mode later on */
- iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0);
-
- tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
- tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- if (qc)
- priv->stations_39[sta_id].tid[tid].seq_number = seq_number;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
- iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
-
- iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
- ieee80211_hdrlen(fc));
/* Tell device the write index *just past* this latest filled TFD */
q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
spin_unlock_irqrestore(&rxq->lock, flags);
}
+void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
+ priv->alloc_rxb_skb--;
+ dev_kfree_skb(rxq->pool[i].skb);
+ rxq->pool[i].skb = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
/*
* this should be called while priv->lock is locked
*/
spin_unlock_irqrestore(&priv->lock, flags);
}
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].skb != NULL) {
+ pci_unmap_single(priv->pci_dev,
+ rxq->pool[i].real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rxq->pool[i].skb);
+ }
+ }
+
+ pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->dma_addr);
+ pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status),
+ rxq->rb_stts, rxq->rb_stts_dma);
+ rxq->bd = NULL;
+ rxq->rb_stts = NULL;
+}
+
+
/* Convert linear signal-to-noise ratio into dB */
static u8 ratio2dB[100] = {
/* 0 1 2 3 4 5 6 7 8 9 */
rxq->queue[i] = NULL;
- pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Reclaim a command buffer only if this packet is a response
rxb->skb = NULL;
}
- pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
spin_lock_irqsave(&rxq->lock, flags);
list_add_tail(&rxb->list, &priv->rxq.rx_used);
spin_unlock_irqrestore(&rxq->lock, flags);
mutex_lock(&priv->mutex);
+ cancel_delayed_work(&priv->scan_check);
+
if (!iwl_is_ready(priv)) {
IWL_WARN(priv, "request scan called when driver not ready.\n");
goto done;
if (!static_key) {
sta_id = iwl3945_hw_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_MAC80211(priv, "leave - %pMnot in station map.\n",
+ IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n",
addr);
return -EINVAL;
}
hw->wiphy->custom_regulatory = true;
+ hw->wiphy->max_scan_ssids = 1; /* WILL FIX */
+
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
iwl_rfkill_unregister(priv);
- cancel_delayed_work(&priv->rfkill_poll);
+ cancel_delayed_work_sync(&priv->rfkill_poll);
iwl3945_dealloc_ucode_pci(priv);
if (priv->rxq.bd)
- iwl_rx_queue_free(priv, &priv->rxq);
+ iwl3945_rx_queue_free(priv, &priv->rxq);
iwl3945_hw_txq_ctx_free(priv);
iwl3945_unset_hw_params(priv);
lbs_deb_rx("rx err: frame received with bad length\n");
dev->stats.rx_length_errors++;
ret = 0;
+ dev_kfree_skb(skb);
goto done;
}
lbs_pr_alert("rxpd not ok\n");
dev->stats.rx_errors++;
ret = 0;
+ dev_kfree_skb(skb);
goto done;
}
rx_desc->next_rx_desc_phys_addr =
cpu_to_le32(rxq->rx_desc_dma
+ nexti * sizeof(*rx_desc));
- rx_desc->rx_ctrl =
- cpu_to_le32(MWL8K_RX_CTRL_OWNED_BY_HOST);
+ rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST;
}
return 0;
return rc;
}
-static void __devexit mwl8k_remove(struct pci_dev *pdev)
+static void __devexit mwl8k_shutdown(struct pci_dev *pdev)
{
printk(KERN_ERR "===>%s(%u)\n", __func__, __LINE__);
}
-static void __devexit mwl8k_shutdown(struct pci_dev *pdev)
+static void __devexit mwl8k_remove(struct pci_dev *pdev)
{
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct mwl8k_priv *priv;
}
/* Wait upto 100ms for tx queue to empty */
- k = 100;
- do {
- k--;
+ for (k = 100; k > 0; k--) {
udelay(1000);
ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
&xmitting);
- if (ret)
+ if (ret || !xmitting)
break;
- } while ((k > 0) && xmitting);
+ }
if (k == 0)
ret = -ETIMEDOUT;
* published by the Free Software Foundation.
*/
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
#include <linux/leds.h>
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
enum p54_control_frame_types {
P54_CONTROL_TYPE_SETUP = 0,
FW_STATE_RESETTING,
};
-#ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
#define P54_LED_MAX_NAME_LEN 31
unsigned int registered;
};
-#endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
struct p54_common {
struct ieee80211_hw *hw;
u8 privacy_caps;
u8 rx_keycache_size;
/* LED management */
- #ifdef CONFIG_MAC80211_LEDS
+#ifdef CONFIG_P54_LEDS
struct p54_led_dev assoc_led;
struct p54_led_dev tx_led;
- #endif /* CONFIG_MAC80211_LEDS */
+#endif /* CONFIG_P54_LEDS */
u16 softled_state; /* bit field of glowing LEDs */
};
priv->basic_rate_mask = 0x15f;
skb_queue_head_init(&priv->tx_queue);
dev->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SUPPORTS_PS |
- IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_NOISE_DBM;
goto err_disable_dev;
}
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
- pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
dev_err(&pdev->dev, "No suitable DMA available\n");
goto err_free_reg;
}
struct ieee80211_tx_info *info;
struct p54_tx_info *minfo;
struct p54s_tx_info *dinfo;
+ unsigned long flags;
int ret = 0;
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
while (!list_empty(&priv->tx_pending)) {
entry = list_entry(priv->tx_pending.next,
list_del_init(&entry->tx_list);
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
dinfo = container_of((void *) entry, struct p54s_tx_info,
tx_list);
ret = p54spi_tx_frame(priv, skb);
- spin_lock_bh(&priv->tx_lock);
-
if (ret < 0) {
p54_free_skb(priv->hw, skb);
- goto out;
+ return ret;
}
- }
-out:
- spin_unlock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ }
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
return ret;
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data;
struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data;
+ unsigned long flags;
BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data)));
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
list_add_tail(&di->tx_list, &priv->tx_pending);
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
queue_work(priv->hw->workqueue, &priv->work);
}
static void p54spi_op_stop(struct ieee80211_hw *dev)
{
struct p54s_priv *priv = dev->priv;
+ unsigned long flags;
if (mutex_lock_interruptible(&priv->mutex)) {
/* FIXME: how to handle this error? */
cancel_work_sync(&priv->work);
p54spi_power_off(priv);
- spin_lock_bh(&priv->tx_lock);
+ spin_lock_irqsave(&priv->tx_lock, flags);
INIT_LIST_HEAD(&priv->tx_pending);
- spin_unlock_bh(&priv->tx_lock);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
priv->fw_state = FW_STATE_OFF;
mutex_unlock(&priv->mutex);
{USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */
{USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
+ {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
mutex_init(&priv->command_lock);
spin_lock_init(&priv->stats_lock);
+ /* because rndis_command() sleeps we need to use workqueue */
+ priv->workqueue = create_singlethread_workqueue("rndis_wlan");
+ INIT_WORK(&priv->work, rndis_wext_worker);
+ INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+
/* try bind rndis_host */
retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS);
if (retval < 0)
disassociate(usbdev, 1);
netif_carrier_off(usbdev->net);
- /* because rndis_command() sleeps we need to use workqueue */
- priv->workqueue = create_singlethread_workqueue("rndis_wlan");
- INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
queue_delayed_work(priv->workqueue, &priv->stats_work,
round_jiffies_relative(STATS_UPDATE_JIFFIES));
- INIT_WORK(&priv->work, rndis_wext_worker);
return 0;
fail:
+ cancel_delayed_work_sync(&priv->stats_work);
+ cancel_work_sync(&priv->work);
+ flush_workqueue(priv->workqueue);
+ destroy_workqueue(priv->workqueue);
+
kfree(priv);
return retval;
}
if (cipher == CIPHER_TKIP_NO_MIC)
cipher = CIPHER_TKIP;
- if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+ if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX)
return;
/* Remove CIPHER_NONE index */
* Register HW.
*/
status = ieee80211_register_hw(rt2x00dev->hw);
- if (status) {
- rt2x00lib_remove_hw(rt2x00dev);
+ if (status)
return status;
- }
set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
if (retval)
return retval;
- rt2x00pci_free_reg(rt2x00dev);
-
pci_save_state(pci_dev);
pci_disable_device(pci_dev);
return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
{
struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
if (pci_set_power_state(pci_dev, PCI_D0) ||
pci_enable_device(pci_dev) ||
return -EIO;
}
- retval = rt2x00pci_alloc_reg(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2x00lib_resume(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
- return 0;
-
-exit_free_reg:
- rt2x00pci_free_reg(rt2x00dev);
-
- return retval;
+ return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00pci_resume);
#endif /* CONFIG_PM */
if (retval)
return retval;
- rt2x00usb_free_reg(rt2x00dev);
-
/*
* Decrease usbdev refcount.
*/
{
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
usb_get_dev(interface_to_usbdev(usb_intf));
- retval = rt2x00usb_alloc_reg(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2x00lib_resume(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
- return 0;
-
-exit_free_reg:
- rt2x00usb_free_reg(rt2x00dev);
-
- return retval;
+ return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00usb_resume);
#endif /* CONFIG_PM */
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
__le64 buf;
struct sk_buff_head queue;
} b_tx_status; /* This queue is used by both -b and non-b devices */
+ struct mutex io_mutex;
+ union {
+ u8 bits8;
+ __le16 bits16;
+ __le32 bits32;
+ } *io_dmabuf;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
{
u8 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits8;
+ mutex_unlock(&priv->io_mutex);
return val;
}
{
__le16 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits16;
+ mutex_unlock(&priv->io_mutex);
return le16_to_cpu(val);
}
{
__le32 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits32;
+ mutex_unlock(&priv->io_mutex);
return le32_to_cpu(val);
}
static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
u8 *addr, u8 val, u8 idx)
{
+ mutex_lock(&priv->io_mutex);
+
+ priv->io_dmabuf->bits8 = val;
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
__le16 *addr, u16 val, u8 idx)
{
- __le16 buf = cpu_to_le16(val);
+ mutex_lock(&priv->io_mutex);
+ priv->io_dmabuf->bits16 = cpu_to_le16(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
- HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
__le32 *addr, u32 val, u8 idx)
{
- __le32 buf = cpu_to_le32(val);
+ mutex_lock(&priv->io_mutex);
+ priv->io_dmabuf->bits32 = cpu_to_le32(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
- HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
/* AirLive */
{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
+ /* Linksys */
+ {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
{}
};
priv = dev->priv;
priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
+ /* allocate "DMA aware" buffer for register accesses */
+ priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
+ if (!priv->io_dmabuf) {
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+ mutex_init(&priv->io_mutex);
+
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
priv->udev = udev;
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "rtl8187: Cannot register device\n");
- goto err_free_dev;
+ goto err_free_dmabuf;
}
mutex_init(&priv->conf_mutex);
skb_queue_head_init(&priv->b_tx_status.queue);
return 0;
+ err_free_dmabuf:
+ kfree(priv->io_dmabuf);
err_free_dev:
ieee80211_free_hw(dev);
usb_set_intfdata(intf, NULL);
priv = dev->priv;
usb_reset_device(priv->udev);
usb_put_dev(interface_to_usbdev(intf));
+ kfree(priv->io_dmabuf);
ieee80211_free_hw(dev);
}
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(10);
+ mutex_lock(&priv->io_mutex);
+
+ priv->io_dmabuf->bits16 = data;
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- addr, 0x8225, &data, sizeof(data), HZ / 2);
+ addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
+ HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(10);
return err;
}
+static const struct net_device_ops xtsonic_netdev_ops = {
+ .ndo_open = xtsonic_open,
+ .ndo_stop = xtsonic_close,
+ .ndo_start_xmit = sonic_send_packet,
+ .ndo_get_stats = sonic_get_stats,
+ .ndo_set_multicast_list = sonic_multicast_list,
+ .ndo_tx_timeout = sonic_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
static int __init sonic_probe1(struct net_device *dev)
{
static unsigned version_printed = 0;
lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
- dev->open = xtsonic_open;
- dev->stop = xtsonic_close;
- dev->hard_start_xmit = sonic_send_packet;
- dev->get_stats = sonic_get_stats;
- dev->set_multicast_list = &sonic_multicast_list;
- dev->tx_timeout = sonic_tx_timeout;
+ dev->netdev_ops = &xtsonic_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
/*
op_ring_buffer_write = NULL;
}
+#define RB_EVENT_HDR_SIZE 4
+
int alloc_cpu_buffers(void)
{
int i;
unsigned long buffer_size = oprofile_cpu_buffer_size;
+ unsigned long byte_size = buffer_size * (sizeof(struct op_sample) +
+ RB_EVENT_HDR_SIZE);
- op_ring_buffer_read = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS);
+ op_ring_buffer_read = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
if (!op_ring_buffer_read)
goto fail;
- op_ring_buffer_write = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS);
+ op_ring_buffer_write = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
if (!op_ring_buffer_write)
goto fail;
}
#ifdef CONFIG_SMP
-static void iosapic_set_affinity_irq(unsigned int irq,
+static int iosapic_set_affinity_irq(unsigned int irq,
const struct cpumask *dest)
{
struct vector_info *vi = iosapic_get_vector(irq);
dest_cpu = cpu_check_affinity(irq, dest);
if (dest_cpu < 0)
- return;
+ return -1;
cpumask_copy(irq_desc[irq].affinity, cpumask_of(dest_cpu));
vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
iosapic_set_irt_data(vi, &dummy_d0, &d1);
iosapic_wr_irt_entry(vi, d0, d1);
spin_unlock_irqrestore(&iosapic_lock, flags);
+
+ return 0;
}
#endif
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */) )
+ NULL /*struct pci_dev* */),
+ 0 /* shared irq flags */ )
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
unsigned long port;
if (!dev->irq) {
- printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
- dev->hpa.start);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
* pardevice fields. -arca
*/
port->ops->init_state(tmp, tmp->state);
- parport_device_proc_register(tmp);
+ if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) {
+ port->proc_device = tmp;
+ parport_device_proc_register(tmp);
+ }
return tmp;
out_free_all:
}
#endif
- parport_device_proc_unregister(dev);
-
port = dev->port->physport;
+ if (port->proc_device == dev) {
+ port->proc_device = NULL;
+ clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags);
+ parport_device_proc_unregister(dev);
+ }
+
if (port->cad == dev) {
printk(KERN_DEBUG "%s: %s forgot to release port\n",
port->name, dev->name);
* pci_write_vpd - Write entry to Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
- * @count: number of bytes to read
- * @val: value to write
+ * @count: number of bytes to write
+ * @buf: buffer containing write data
*
*/
ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
struct dmar_drhd_unit *dmaru;
int ret = 0;
+ drhd = (struct acpi_dmar_hardware_unit *)header;
+ if (!drhd->address) {
+ /* Promote an attitude of violence to a BIOS engineer today */
+ WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ return -ENODEV;
+ }
dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
if (!dmaru)
return -ENOMEM;
dmaru->hdr = header;
- drhd = (struct acpi_dmar_hardware_unit *)header;
dmaru->reg_base_addr = drhd->address;
dmaru->segment = drhd->segment;
dmaru->include_all = drhd->flags & 0x1; /* BIT0: INCLUDE_ALL */
struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */
struct list_head sibling;
- struct pci_dev *pci_dev;
struct notifier_block nb;
acpi_handle handle;
/*
* Lifetime rules for pci_dev:
- * - The one in acpiphp_func has its refcount elevated by pci_get_slot()
- * when the driver is loaded or when an insertion event occurs. It loses
- * a refcount when its ejected or the driver unloads.
* - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
unsigned long long adr, sun;
int device, function, retval;
struct pci_bus *pbus = bridge->pci_bus;
+ struct pci_dev *pdev;
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
newfunc->slot = slot;
list_add_tail(&newfunc->sibling, &slot->funcs);
- /* associate corresponding pci_dev */
- newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function));
- if (newfunc->pci_dev) {
+ pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
+ if (pdev) {
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
+ pci_dev_put(pdev);
}
if (is_dock_device(handle)) {
if (ACPI_FAILURE(status))
err("failed to remove notify handler\n");
}
- pci_dev_put(func->pci_dev);
list_del(list);
kfree(func);
}
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
- /* associate pci_dev to our representation */
list_for_each (l, &slot->funcs) {
func = list_entry(l, struct acpiphp_func, sibling);
- func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
- func->function));
- if (!func->pci_dev)
+ dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
+ func->function));
+ if (!dev)
continue;
- if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
- func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
+ dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) {
+ pci_dev_put(dev);
continue;
+ }
status = find_p2p_bridge(func->handle, (u32)1, bus, NULL);
if (ACPI_FAILURE(status))
warn("find_p2p_bridge failed (error code = 0x%x)\n",
status);
+ pci_dev_put(dev);
}
slot->flags |= SLOT_ENABLED;
*/
static int disable_device(struct acpiphp_slot *slot)
{
- int retval = 0;
struct acpiphp_func *func;
- struct list_head *l;
+ struct pci_dev *pdev;
/* is this slot already disabled? */
if (!(slot->flags & SLOT_ENABLED))
goto err_exit;
- list_for_each (l, &slot->funcs) {
- func = list_entry(l, struct acpiphp_func, sibling);
-
+ list_for_each_entry(func, &slot->funcs, sibling) {
if (func->bridge) {
/* cleanup p2p bridges under this P2P bridge */
cleanup_p2p_bridge(func->bridge->handle,
func->bridge = NULL;
}
- if (func->pci_dev) {
- pci_stop_bus_device(func->pci_dev);
- if (func->pci_dev->subordinate) {
- disable_bridges(func->pci_dev->subordinate);
- pci_disable_device(func->pci_dev);
+ pdev = pci_get_slot(slot->bridge->pci_bus,
+ PCI_DEVFN(slot->device, func->function));
+ if (pdev) {
+ pci_stop_bus_device(pdev);
+ if (pdev->subordinate) {
+ disable_bridges(pdev->subordinate);
+ pci_disable_device(pdev);
}
+ pci_remove_bus_device(pdev);
+ pci_dev_put(pdev);
}
}
- list_for_each (l, &slot->funcs) {
- func = list_entry(l, struct acpiphp_func, sibling);
-
+ list_for_each_entry(func, &slot->funcs, sibling) {
acpiphp_unconfigure_ioapics(func->handle);
acpiphp_bus_trim(func->handle);
- /* try to remove anyway.
- * acpiphp_bus_add might have been failed */
-
- if (!func->pci_dev)
- continue;
-
- pci_remove_bus_device(func->pci_dev);
- pci_dev_put(func->pci_dev);
- func->pci_dev = NULL;
}
slot->flags &= (~SLOT_ENABLED);
- err_exit:
- return retval;
+err_exit:
+ return 0;
}
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ struct io_apic_irq_attr irq_attr;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
-
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
-
- debug("rtable->exlusive_irqs = %x\n",
+ (int) (*cur_slot)->device, i,
+ &irq_attr);
+
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
+
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
int max_irq;
int pos;
int irq;
+ int node;
pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
if (!pos)
cfg->msg.address_lo = 0xffffffff;
cfg->msg.address_hi = 0xffffffff;
- irq = create_irq();
+ node = dev_to_node(&dev->dev);
+ irq = create_irq_nr(0, node);
if (irq <= 0) {
kfree(cfg);
/**
* ht_destroy_irq - destroy an irq created with ht_create_irq
+ * @irq: irq to be destroyed
*
* This reverses ht_create_irq removing the specified irq from
* existence. The irq should be free before this happens.
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
+#ifndef PHYSICAL_PAGE_MASK
+#define PHYSICAL_PAGE_MASK PAGE_MASK
+#endif
+
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
start &= (((u64)1) << addr_width) - 1;
end &= (((u64)1) << addr_width) - 1;
/* in case it's partial page */
- start = PAGE_ALIGN(start);
- end &= PAGE_MASK;
+ start &= PAGE_MASK;
+ end = PAGE_ALIGN(end);
npages = (end - start) / VTD_PAGE_SIZE;
/* we don't need lock here, nobody else touches the iova range */
if (!r->flags || !(r->flags & IORESOURCE_MEM))
continue;
addr = r->start;
- addr &= PAGE_MASK;
+ addr &= PHYSICAL_PAGE_MASK;
size = r->end - addr;
size = PAGE_ALIGN(size);
iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
}
}
-#ifdef CONFIG_INTR_REMAP
- if (!intr_remapping_enabled) {
- ret = enable_intr_remapping(0);
- if (ret)
- printk(KERN_ERR
- "IOMMU: enable interrupt remapping failed\n");
- }
-#endif
-
/*
* For each rmrr
* for each dev attached to rmrr
* is not a big problem
*/
ret = domain_page_mapping(domain, start_paddr,
- ((u64)paddr) & PAGE_MASK, size, prot);
+ ((u64)paddr) & PHYSICAL_PAGE_MASK,
+ size, prot);
if (ret)
goto error;
addr = page_to_phys(sg_page(sg)) + sg->offset;
size = aligned_size((u64)addr, sg->length);
ret = domain_page_mapping(domain, start_addr + offset,
- ((u64)addr) & PAGE_MASK,
- size, prot);
+ ((u64)addr) & PHYSICAL_PAGE_MASK,
+ size, prot);
if (ret) {
/* clear the page */
dma_pte_clear_range(domain, start_addr,
static int ir_ioapic_num;
int intr_remapping_enabled;
+static int disable_intremap;
+static __init int setup_nointremap(char *str)
+{
+ disable_intremap = 1;
+ return 0;
+}
+early_param("nointremap", setup_nointremap);
+
struct irq_2_iommu {
struct intel_iommu *iommu;
u16 irte_index;
};
#ifdef CONFIG_GENERIC_HARDIRQS
-static struct irq_2_iommu *get_one_free_irq_2_iommu(int cpu)
+static struct irq_2_iommu *get_one_free_irq_2_iommu(int node)
{
struct irq_2_iommu *iommu;
- int node;
-
- node = cpu_to_node(cpu);
iommu = kzalloc_node(sizeof(*iommu), GFP_ATOMIC, node);
- printk(KERN_DEBUG "alloc irq_2_iommu on cpu %d node %d\n", cpu, node);
+ printk(KERN_DEBUG "alloc irq_2_iommu on node %d\n", node);
return iommu;
}
return desc->irq_2_iommu;
}
-static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu)
+static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node)
{
struct irq_desc *desc;
struct irq_2_iommu *irq_iommu;
/*
* alloc irq desc if not allocated already.
*/
- desc = irq_to_desc_alloc_cpu(irq, cpu);
+ desc = irq_to_desc_alloc_node(irq, node);
if (!desc) {
printk(KERN_INFO "can not get irq_desc for %d\n", irq);
return NULL;
irq_iommu = desc->irq_2_iommu;
if (!irq_iommu)
- desc->irq_2_iommu = get_one_free_irq_2_iommu(cpu);
+ desc->irq_2_iommu = get_one_free_irq_2_iommu(node);
return desc->irq_2_iommu;
}
static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
{
- return irq_2_iommu_alloc_cpu(irq, boot_cpu_id);
+ return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id));
}
#else /* !CONFIG_SPARSE_IRQ */
readl, (sts & DMA_GSTS_IRTPS), sts);
spin_unlock_irqrestore(&iommu->register_lock, flags);
- if (mode == 0) {
- spin_lock_irqsave(&iommu->register_lock, flags);
-
- /* enable comaptiblity format interrupt pass through */
- cmd = iommu->gcmd | DMA_GCMD_CFI;
- iommu->gcmd |= DMA_GCMD_CFI;
- writel(cmd, iommu->reg + DMAR_GCMD_REG);
-
- IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
- readl, (sts & DMA_GSTS_CFIS), sts);
-
- spin_unlock_irqrestore(&iommu->register_lock, flags);
- }
-
/*
* global invalidation of interrupt entry cache before enabling
* interrupt-remapping.
spin_unlock_irqrestore(&iommu->register_lock, flags);
}
+int __init intr_remapping_supported(void)
+{
+ struct dmar_drhd_unit *drhd;
+
+ if (disable_intremap)
+ return 0;
+
+ for_each_drhd_unit(drhd) {
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (!ecap_ir_support(iommu->ecap))
+ return 0;
+ }
+
+ return 1;
+}
+
int __init enable_intr_remapping(int eim)
{
struct dmar_drhd_unit *drhd;
entry->msi_attrib.default_irq = dev->irq;
entry->msi_attrib.pos = pos;
entry->mask_base = base;
- entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
msix_mask_irq(entry, 1);
list_add_tail(&entry->list, &dev->msi_list);
msix_set_enable(dev, 1);
dev->msix_enabled = 1;
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ int vector = entry->msi_attrib.entry_nr;
+ entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
+ PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+ }
+
return 0;
}
/**
* pci_read_legacy_io - read byte(s) from legacy I/O port space
* @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
* @buf: buffer to store results
* @off: offset into legacy I/O port space
* @count: number of bytes to read
/**
* pci_write_legacy_io - write byte(s) to legacy I/O port space
* @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
* @buf: buffer containing value to be written
* @off: offset into legacy I/O port space
* @count: number of bytes to write
/**
* pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: dev to cleanup
*
- * If we created resource files for @dev, remove them from sysfs and
+ * If we created resource files for @pdev, remove them from sysfs and
* free their resources.
*/
static void
/**
* pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * @pdev: dev in question
*
- * Walk the resources in @dev creating files for each resource available.
+ * Walk the resources in @pdev creating files for each resource available.
*/
static int pci_create_resource_files(struct pci_dev *pdev)
{
/**
* pci_write_rom - used to enable access to the PCI ROM display
* @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
* @buf: user input
* @off: file offset
* @count: number of byte in input
/**
* pci_read_rom - read a PCI ROM
* @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
* @buf: where to put the data we read from the ROM
* @off: file offset
* @count: number of bytes to read
} else {
error = -ENODEV;
/* Fall back to PCI_D0 if native PM is not supported */
- pci_update_current_state(dev, PCI_D0);
+ if (!dev->pm_cap)
+ dev->current_state = PCI_D0;
}
return error;
#define PCI_EXP_SAVE_REGS 7
+#define pcie_cap_has_devctl(type, flags) 1
+#define pcie_cap_has_lnkctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_ENDPOINT || \
+ type == PCI_EXP_TYPE_LEG_END))
+#define pcie_cap_has_sltctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ ((type == PCI_EXP_TYPE_ROOT_PORT) || \
+ (type == PCI_EXP_TYPE_DOWNSTREAM && \
+ (flags & PCI_EXP_FLAGS_SLOT))))
+#define pcie_cap_has_rtctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_RC_EC))
+#define pcie_cap_has_devctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_lnkctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_sltctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+
static int pci_save_pcie_state(struct pci_dev *dev)
{
int pos, i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pos <= 0)
}
cap = (u16 *)&save_state->data[0];
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
return 0;
}
int i = 0, pos;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
return;
cap = (u16 *)&save_state->data[0];
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
}
static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
enum pci_ers_result new)
{
+ if (new == PCI_ERS_RESULT_NONE)
+ return orig;
+
switch (orig) {
case PCI_ERS_RESULT_CAN_RECOVER:
case PCI_ERS_RESULT_RECOVERED:
static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
{
- pci_ers_result_t status = PCI_ERS_RESULT_NONE;
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
int retval;
/* If fatal, restore cfg space for possible link reset at upstream */
/* Early fixups, before probing the BARs */
pci_fixup_device(pci_fixup_early, dev);
+ /* device class may be changed after fixup */
+ class = dev->class >> 8;
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
return max;
}
-void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b)
-{
-}
-
struct pci_bus * pci_create_bus(struct device *parent,
int bus, struct pci_ops *ops, void *sysdata)
{
b->resource[0] = &ioport_resource;
b->resource[1] = &iomem_resource;
- set_pci_bus_resources_arch_default(b);
-
return b;
dev_create_file_err:
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
static void __devinit quirk_disable_msi(struct pci_dev *dev)
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *res = bus->resource[i];
- if (!res)
+ if (!res || !res->end)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %s %pR\n", i,
- (res->flags & IORESOURCE_IO) ? "io: " : "mem:", res);
+ (res->flags & IORESOURCE_IO) ? "io: " :
+ ((res->flags & IORESOURCE_PREFETCH)? "pref mem":"mem:"),
+ res);
}
}
/**
* pci_renumber_slot - update %struct pci_slot -> number
- * @slot - %struct pci_slot to update
- * @slot_nr - new number for slot
+ * @slot: &struct pci_slot to update
+ * @slot_nr: new number for slot
*
* The primary purpose of this interface is to allow callers who earlier
* created a placeholder slot in pci_create_slot() by passing a -1 as
{
int ret;
+ if (!platform_scoop_config)
+ return -ENODEV;
+
sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
{KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x40, KEY_PREVIOUSSONG},
{KE_KEY, 0x41, KEY_NEXTSONG},
- {KE_KEY, 0x43, KEY_STOP},
+ {KE_KEY, 0x43, KEY_STOPCD},
{KE_KEY, 0x45, KEY_PLAYPAUSE},
{KE_KEY, 0x50, KEY_EMAIL},
{KE_KEY, 0x51, KEY_WWW},
- {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */
+ {KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */
{KE_KEY, 0x5D, KEY_WLAN},
{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
{KE_KEY, 0x82, KEY_CAMERA},
- {KE_KEY, 0x8A, KEY_TV},
+ {KE_KEY, 0x8A, KEY_PROG1},
{KE_KEY, 0x95, KEY_MEDIA},
{KE_KEY, 0x99, KEY_PHONE},
{KE_END, 0},
static struct key_entry eeepc_keymap[] = {
/* Sleep already handled via generic ACPI code */
{KE_KEY, 0x10, KEY_WLAN },
+ {KE_KEY, 0x11, KEY_WLAN },
{KE_KEY, 0x12, KEY_PROG1 },
{KE_KEY, 0x13, KEY_MUTE },
{KE_KEY, 0x14, KEY_VOLUMEDOWN },
{KE_KEY, 0x1b, KEY_ZOOM },
{KE_KEY, 0x1c, KEY_PROG2 },
{KE_KEY, 0x1d, KEY_PROG3 },
+ {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN },
+ {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP },
{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
+EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
+ &dev_attr_cpufv.attr,
NULL
};
return 0;
}
-static void notify_brn(void)
+static int notify_brn(void)
{
+ /* returns the *previous* brightness, or -1 */
struct backlight_device *bd = eeepc_backlight_device;
- if (bd)
+ if (bd) {
+ int old = bd->props.brightness;
bd->props.brightness = read_brightness(bd);
+ return old;
+ }
+ return -1;
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
{
+ enum rfkill_state state;
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
return;
}
- if (get_acpi(CM_ASL_WLAN) == 1) {
+ eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
+
+ if (state == RFKILL_STATE_UNBLOCKED) {
dev = pci_get_slot(bus, 0);
if (dev) {
/* Device already present */
pci_dev_put(dev);
}
}
+
+ rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
}
static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
u16 count;
+ int brn = -ENODEV;
if (!ehotk)
return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
- notify_brn();
+ brn = notify_brn();
count = ehotk->event_count[event % 128]++;
acpi_bus_generate_proc_event(ehotk->device, event, count);
acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
dev_name(&ehotk->device->dev), event,
count);
if (ehotk->inputdev) {
+ if (brn != -ENODEV) {
+ /* brightness-change events need special
+ * handling for conversion to key events
+ */
+ if (brn < 0)
+ brn = event;
+ else
+ brn += NOTIFY_BRN_MIN;
+ if (event < brn)
+ event = NOTIFY_BRN_MIN; /* brightness down */
+ else if (event > brn)
+ event = NOTIFY_BRN_MIN + 2; /* ... up */
+ else
+ event = NOTIFY_BRN_MIN + 1; /* ... unchanged */
+ }
key = eepc_get_entry_by_scancode(event);
if (key) {
switch (key->type) {
if (ACPI_FAILURE(status))
printk(EEEPC_ERR "Error installing notify handler\n");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
if (get_acpi(CM_ASL_WLAN) != -1) {
ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
RFKILL_TYPE_WLAN);
goto bluetooth_fail;
}
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
return 0;
bluetooth_fail:
wlan_fail:
if (ehotk->eeepc_wlan_rfkill)
rfkill_free(ehotk->eeepc_wlan_rfkill);
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
ehotk_fail:
kfree(ehotk);
ehotk = NULL;
static struct fujitsu_hotkey_t *fujitsu_hotkey;
-static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
- void *data);
+static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event);
#ifdef CONFIG_LEDS_CLASS
static enum led_brightness logolamp_get(struct led_classdev *cdev);
static u32 dbg_level = 0x03;
#endif
-static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data);
+static void acpi_fujitsu_notify(struct acpi_device *device, u32 event);
/* Fujitsu ACPI interface function */
static int acpi_fujitsu_add(struct acpi_device *device)
{
- acpi_status status;
acpi_handle handle;
int result = 0;
int state = 0;
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
device->driver_data = fujitsu;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_notify, fujitsu);
-
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "Error installing notify handler\n");
- error = -ENODEV;
- goto err_stop;
- }
-
fujitsu->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_uninstall_notify;
+ goto err_stop;
}
snprintf(fujitsu->phys, sizeof(fujitsu->phys),
end:
err_free_input_dev:
input_free_device(input);
-err_uninstall_notify:
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_notify);
err_stop:
return result;
static int acpi_fujitsu_remove(struct acpi_device *device, int type)
{
- acpi_status status;
struct fujitsu_t *fujitsu = NULL;
if (!device || !acpi_driver_data(device))
fujitsu = acpi_driver_data(device);
- status = acpi_remove_notify_handler(fujitsu->acpi_handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_notify);
-
if (!device || !acpi_driver_data(device))
return -EINVAL;
/* Brightness notify */
-static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_fujitsu_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
int keycode;
input_report_key(input, keycode, 0);
input_sync(input);
}
-
- return;
}
/* ACPI device for hotkey handling */
static int acpi_fujitsu_hotkey_add(struct acpi_device *device)
{
- acpi_status status;
acpi_handle handle;
int result = 0;
int state = 0;
sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS);
device->driver_data = fujitsu_hotkey;
- status = acpi_install_notify_handler(device->handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_hotkey_notify,
- fujitsu_hotkey);
-
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "Error installing notify handler\n");
- error = -ENODEV;
- goto err_stop;
- }
-
/* kfifo */
spin_lock_init(&fujitsu_hotkey->fifo_lock);
fujitsu_hotkey->fifo =
fujitsu_hotkey->input = input = input_allocate_device();
if (!input) {
error = -ENOMEM;
- goto err_uninstall_notify;
+ goto err_free_fifo;
}
snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys),
end:
err_free_input_dev:
input_free_device(input);
-err_uninstall_notify:
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_hotkey_notify);
+err_free_fifo:
kfifo_free(fujitsu_hotkey->fifo);
err_stop:
static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type)
{
- acpi_status status;
struct fujitsu_hotkey_t *fujitsu_hotkey = NULL;
if (!device || !acpi_driver_data(device))
fujitsu_hotkey = acpi_driver_data(device);
- status = acpi_remove_notify_handler(fujitsu_hotkey->acpi_handle,
- ACPI_DEVICE_NOTIFY,
- acpi_fujitsu_hotkey_notify);
-
fujitsu_hotkey->acpi_handle = NULL;
kfifo_free(fujitsu_hotkey->fifo);
return 0;
}
-static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event,
- void *data)
+static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event)
{
struct input_dev *input;
int keycode, keycode_r;
input_sync(input);
break;
}
-
- return;
}
/* Initialization */
.ops = {
.add = acpi_fujitsu_add,
.remove = acpi_fujitsu_remove,
+ .notify = acpi_fujitsu_notify,
},
};
.ops = {
.add = acpi_fujitsu_hotkey_add,
.remove = acpi_fujitsu_hotkey_remove,
+ .notify = acpi_fujitsu_hotkey_notify,
},
};
static int acpi_pcc_hotkey_add(struct acpi_device *device);
static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type);
static int acpi_pcc_hotkey_resume(struct acpi_device *device);
+static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id pcc_device_ids[] = {
{ "MAT0012", 0},
.add = acpi_pcc_hotkey_add,
.remove = acpi_pcc_hotkey_remove,
.resume = acpi_pcc_hotkey_resume,
+ .notify = acpi_pcc_hotkey_notify,
},
};
union acpi_object *hkey = NULL;
int i;
- status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, 0,
+ status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, NULL,
&buffer);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
return;
}
-static void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event)
{
- struct pcc_acpi *pcc = (struct pcc_acpi *) data;
+ struct pcc_acpi *pcc = acpi_driver_data(device);
switch (event) {
case HKEY_NOTIFY:
static int acpi_pcc_hotkey_add(struct acpi_device *device)
{
- acpi_status status;
struct pcc_acpi *pcc;
int num_sifr, result;
goto out_sinf;
}
- /* initialize hotkey input device */
- status = acpi_install_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
- acpi_pcc_hotkey_notify, pcc);
-
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
- "Error installing notify handler\n"));
- result = -ENODEV;
- goto out_input;
- }
-
/* initialize backlight */
pcc->backlight = backlight_device_register("panasonic", NULL, pcc,
&pcc_backlight_ops);
if (IS_ERR(pcc->backlight))
- goto out_notify;
+ goto out_input;
if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf)) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
out_backlight:
backlight_device_unregister(pcc->backlight);
-out_notify:
- acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
- acpi_pcc_hotkey_notify);
out_input:
input_unregister_device(pcc->input_dev);
/* no need to input_free_device() since core input API refcount and
backlight_device_unregister(pcc->backlight);
- acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY,
- acpi_pcc_hotkey_notify);
-
input_unregister_device(pcc->input_dev);
/* no need to input_free_device() since core input API refcount and
* free()s the device */
struct input_dev *key_dev = sony_laptop_input.key_dev;
struct sony_laptop_keypress kp = { NULL };
- if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+ if (event == SONYPI_EVENT_FNKEY_RELEASED ||
+ event == SONYPI_EVENT_ANYBUTTON_RELEASED) {
/* Nothing, not all VAIOs generate this event */
return;
}
{ 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0x86, SONYPI_EVENT_PKEY_P5 },
{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
- { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED },
{ 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0, 0 },
/*
* ACPI callbacks
*/
-static void sony_acpi_notify(acpi_handle handle, u32 event, void *data)
+static void sony_nc_notify(struct acpi_device *device, u32 event)
{
u32 ev = event;
struct sony_nc_event *key_event;
if (sony_call_snc_handle(key_handle, 0x200, &result)) {
- dprintk("sony_acpi_notify, unable to decode"
+ dprintk("sony_nc_notify, unable to decode"
" event 0x%.2x 0x%.2x\n", key_handle,
ev);
/* restore the original event */
} else
sony_laptop_report_input_event(ev);
- dprintk("sony_acpi_notify, event: 0x%.2x\n", ev);
+ dprintk("sony_nc_notify, event: 0x%.2x\n", ev);
acpi_bus_generate_proc_event(sony_nc_acpi_device, 1, ev);
}
sony_call_snc_handle(0x0100, 0, &result);
sony_call_snc_handle(0x0101, 0, &result);
sony_call_snc_handle(0x0102, 0x100, &result);
+ sony_call_snc_handle(0x0127, 0, &result);
return 0;
}
/* set the last requested brightness level */
if (sony_backlight_device &&
- !sony_backlight_update_status(sony_backlight_device))
+ sony_backlight_update_status(sony_backlight_device) < 0)
printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
return 0;
err = rfkill_register(sony_wifi_rfkill);
if (err)
rfkill_free(sony_wifi_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
+ sony_nc_rfkill_set(sony_wifi_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_bluetooth_rfkill);
if (err)
rfkill_free(sony_bluetooth_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
+ sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_wwan_rfkill);
if (err)
rfkill_free(sony_wwan_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
+ sony_nc_rfkill_set(sony_wwan_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_wimax_rfkill);
if (err)
rfkill_free(sony_wimax_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
+ sony_nc_rfkill_set(sony_wimax_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
goto outwalk;
}
- status = acpi_install_notify_handler(sony_nc_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- sony_acpi_notify, NULL);
- if (ACPI_FAILURE(status)) {
- printk(KERN_WARNING DRV_PFX "unable to install notify handler (%u)\n", status);
- result = -ENODEV;
- goto outinput;
- }
-
if (acpi_video_backlight_support()) {
printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
if (sony_backlight_device)
backlight_device_unregister(sony_backlight_device);
- status = acpi_remove_notify_handler(sony_nc_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- sony_acpi_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
-
- outinput:
sony_laptop_remove_input();
outwalk:
static int sony_nc_remove(struct acpi_device *device, int type)
{
- acpi_status status;
struct sony_nc_value *item;
if (sony_backlight_device)
sony_nc_acpi_device = NULL;
- status = acpi_remove_notify_handler(sony_nc_acpi_handle,
- ACPI_DEVICE_NOTIFY,
- sony_acpi_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n");
-
for (item = sony_nc_values; item->name; ++item) {
device_remove_file(&sony_pf_device->dev, &item->devattr);
}
.add = sony_nc_add,
.remove = sony_nc_remove,
.resume = sony_nc_resume,
+ .notify = sony_nc_notify,
},
};
* 02110-1301, USA.
*/
-#define TPACPI_VERSION "0.22"
+#define TPACPI_VERSION "0.23"
#define TPACPI_SYSFS_VERSION 0x020300
/*
static struct workqueue_struct *tpacpi_wq;
+enum led_status_t {
+ TPACPI_LED_OFF = 0,
+ TPACPI_LED_ON,
+ TPACPI_LED_BLINK,
+};
+
/* Special LED class that can defer work */
struct tpacpi_led_classdev {
struct led_classdev led_classdev;
struct work_struct work;
- enum led_brightness new_brightness;
+ enum led_status_t new_state;
unsigned int led;
};
return len;
}
-static void hotkey_enabledisable_warn(void)
+static void hotkey_enabledisable_warn(bool enable)
{
tpacpi_log_usertask("procfs hotkey enable/disable");
- WARN(1, TPACPI_WARN
- "hotkey enable/disable functionality has been "
- "removed from the driver. Hotkeys are always enabled.\n");
+ if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
+ TPACPI_WARN
+ "hotkey enable/disable functionality has been "
+ "removed from the driver. Hotkeys are always "
+ "enabled\n"))
+ printk(TPACPI_ERR
+ "Please remove the hotkey=enable module "
+ "parameter, it is deprecated. Hotkeys are always "
+ "enabled\n");
}
static int hotkey_write(char *buf)
res = 0;
while ((cmd = next_cmd(&buf))) {
if (strlencmp(cmd, "enable") == 0) {
- hotkey_enabledisable_warn();
+ hotkey_enabledisable_warn(1);
} else if (strlencmp(cmd, "disable") == 0) {
- hotkey_enabledisable_warn();
+ hotkey_enabledisable_warn(0);
res = -EPERM;
} else if (strlencmp(cmd, "reset") == 0) {
mask = hotkey_orig_mask;
container_of(work, struct tpacpi_led_classdev, work);
if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
- light_set_status((data->new_brightness != LED_OFF));
+ light_set_status((data->new_state != TPACPI_LED_OFF));
}
static void light_sysfs_set(struct led_classdev *led_cdev,
container_of(led_cdev,
struct tpacpi_led_classdev,
led_classdev);
- data->new_brightness = brightness;
+ data->new_state = (brightness != LED_OFF) ?
+ TPACPI_LED_ON : TPACPI_LED_OFF;
queue_work(tpacpi_wq, &data->work);
}
TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */
};
-enum led_status_t {
- TPACPI_LED_OFF = 0,
- TPACPI_LED_ON,
- TPACPI_LED_BLINK,
-};
-
static enum led_access_mode led_supported;
TPACPI_HANDLE(led, ec, "SLED", /* 570 */
return rc;
}
-static void led_sysfs_set_status(unsigned int led,
- enum led_brightness brightness)
-{
- led_set_status(led,
- (brightness == LED_OFF) ?
- TPACPI_LED_OFF :
- (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
- TPACPI_LED_BLINK : TPACPI_LED_ON);
-}
-
static void led_set_status_worker(struct work_struct *work)
{
struct tpacpi_led_classdev *data =
container_of(work, struct tpacpi_led_classdev, work);
if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
- led_sysfs_set_status(data->led, data->new_brightness);
+ led_set_status(data->led, data->new_state);
}
static void led_sysfs_set(struct led_classdev *led_cdev,
struct tpacpi_led_classdev *data = container_of(led_cdev,
struct tpacpi_led_classdev, led_classdev);
- data->new_brightness = brightness;
+ if (brightness == LED_OFF)
+ data->new_state = TPACPI_LED_OFF;
+ else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK)
+ data->new_state = TPACPI_LED_ON;
+ else
+ data->new_state = TPACPI_LED_BLINK;
+
queue_work(tpacpi_wq, &data->work);
}
} else if ((*delay_on != 500) || (*delay_off != 500))
return -EINVAL;
- data->new_brightness = TPACPI_LED_BLINK;
+ data->new_state = TPACPI_LED_BLINK;
queue_work(tpacpi_wq, &data->work);
return 0;
MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
+/*
+ * This will autoload the driver in almost every ThinkPad
+ * in widespread use.
+ *
+ * Only _VERY_ old models, like the 240, 240x and 570 lack
+ * the HKEY event interface.
+ */
+MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids);
+
/*
* DMI matching for module autoloading
*
#define IBM_BIOS_MODULE_ALIAS(__type) \
MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
-/* Non-ancient thinkpads */
-MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
-MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
-
/* Ancient thinkpad BIOSes have to be identified by
* BIOS type or model number, and there are far less
* BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
-IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
-IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
+IBM_BIOS_MODULE_ALIAS("I[MU]"); /* 570, 570e */
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_AUTHOR("Borislav Deianov <borislav@users.sf.net>");
+MODULE_AUTHOR("Henrique de Moraes Holschuh <hmh@hmh.eng.br>");
MODULE_DESCRIPTION(TPACPI_DESC);
MODULE_VERSION(TPACPI_VERSION);
MODULE_LICENSE("GPL");
static int acpi_wmi_remove(struct acpi_device *device, int type);
static int acpi_wmi_add(struct acpi_device *device);
+static void acpi_wmi_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id wmi_device_ids[] = {
{"PNP0C14", 0},
.ops = {
.add = acpi_wmi_add,
.remove = acpi_wmi_remove,
+ .notify = acpi_wmi_notify,
},
};
}
}
-static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data)
+static void acpi_wmi_notify(struct acpi_device *device, u32 event)
{
struct guid_block *block;
struct wmi_block *wblock;
struct list_head *p;
- struct acpi_device *device = data;
list_for_each(p, &wmi_blocks.list) {
wblock = list_entry(p, struct wmi_block, list);
static int acpi_wmi_remove(struct acpi_device *device, int type)
{
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_wmi_notify);
-
acpi_remove_address_space_handler(device->handle,
ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler);
acpi_status status;
int result = 0;
- status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_wmi_notify, device);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing notify handler\n");
- return -ENODEV;
- }
-
status = acpi_install_address_space_handler(device->handle,
ACPI_ADR_SPACE_EC,
&acpi_wmi_ec_space_handler,
/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
ret = 0;
- if (acpi_bus_power_manageable(handle)) {
- ret = acpi_bus_set_power(handle, ACPI_STATE_D3);
- if (ret)
- return ret;
- }
+ if (acpi_bus_power_manageable(handle))
+ acpi_bus_set_power(handle, ACPI_STATE_D3);
+ /* continue even if acpi_bus_set_power() fails */
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
ret = -ENODEV;
return ret;
}
flags = irq_flags(triggering, polarity, shareable);
- irq = acpi_register_gsi(gsi, triggering, polarity);
+ irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (irq >= 0)
pcibios_penalize_isa_irq(irq, 1);
else
struct power_supply usb;
struct power_supply adapter;
+
+ struct delayed_work charging_restart_work;
};
int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
int ret = 0;
u8 bits;
+ int charging_start = 1;
+ u8 mbcs2, chgmod;
if (ma >= 1000)
bits = PCF50633_MBCC7_USB_1000mA;
bits = PCF50633_MBCC7_USB_500mA;
else if (ma >= 100)
bits = PCF50633_MBCC7_USB_100mA;
- else
+ else {
bits = PCF50633_MBCC7_USB_SUSPEND;
+ charging_start = 0;
+ }
ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
PCF50633_MBCC7_USB_MASK, bits);
else
dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
+ /* Manual charging start */
+ mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+ /* If chgmod == BATFULL, setting chgena has no effect.
+ * We need to set resume instead.
+ */
+ if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
+ pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+ else
+ pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
+
+ mbc->usb_active = charging_start;
+
power_supply_changed(&mbc->usb);
return ret;
}
EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
-void pcf50633_mbc_set_status(struct pcf50633 *pcf, int what, int status)
-{
- struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
-
- if (what & PCF50633_MBC_USB_ONLINE)
- mbc->usb_online = !!status;
- if (what & PCF50633_MBC_USB_ACTIVE)
- mbc->usb_active = !!status;
- if (what & PCF50633_MBC_ADAPTER_ONLINE)
- mbc->adapter_online = !!status;
- if (what & PCF50633_MBC_ADAPTER_ACTIVE)
- mbc->adapter_active = !!status;
-}
-EXPORT_SYMBOL_GPL(pcf50633_mbc_set_status);
-
static ssize_t
show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
{
.attrs = pcf50633_mbc_sysfs_entries,
};
+/* MBC state machine switches into charging mode when the battery voltage
+ * falls below 96% of a battery float voltage. But the voltage drop in Li-ion
+ * batteries is marginal(1~2 %) till about 80% of its capacity - which means,
+ * after a BATFULL, charging won't be restarted until 80%.
+ *
+ * This work_struct function restarts charging at regular intervals to make
+ * sure we don't discharge too much
+ */
+
+static void pcf50633_mbc_charging_restart(struct work_struct *work)
+{
+ struct pcf50633_mbc *mbc;
+ u8 mbcs2, chgmod;
+
+ mbc = container_of(work, struct pcf50633_mbc,
+ charging_restart_work.work);
+
+ mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
+ chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+ if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
+ return;
+
+ /* Restart charging */
+ pcf50633_reg_set_bit_mask(mbc->pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
+ mbc->usb_active = 1;
+ power_supply_changed(&mbc->usb);
+
+ dev_info(mbc->pcf->dev, "Charging restarted\n");
+}
+
static void
pcf50633_mbc_irq_handler(int irq, void *data)
{
struct pcf50633_mbc *mbc = data;
+ int chg_restart_interval =
+ mbc->pcf->pdata->charging_restart_interval;
/* USB */
if (irq == PCF50633_IRQ_USBINS) {
mbc->usb_online = 0;
mbc->usb_active = 0;
pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
+ cancel_delayed_work_sync(&mbc->charging_restart_work);
}
/* Adapter */
if (irq == PCF50633_IRQ_BATFULL) {
mbc->usb_active = 0;
mbc->adapter_active = 0;
- }
+
+ if (chg_restart_interval > 0)
+ schedule_delayed_work(&mbc->charging_restart_work,
+ chg_restart_interval);
+ } else if (irq == PCF50633_IRQ_USBLIMON)
+ mbc->usb_active = 0;
+ else if (irq == PCF50633_IRQ_USBLIMOFF)
+ mbc->usb_active = 1;
power_supply_changed(&mbc->usb);
power_supply_changed(&mbc->adapter);
return ret;
}
+ INIT_DELAYED_WORK(&mbc->charging_restart_work,
+ pcf50633_mbc_charging_restart);
+
ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
if (ret)
dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
power_supply_unregister(&mbc->usb);
power_supply_unregister(&mbc->adapter);
+ cancel_delayed_work_sync(&mbc->charging_restart_work);
+
kfree(mbc);
return 0;
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/power_supply.h>
#include <linux/pda_power.h>
+#include <linux/regulator/consumer.h>
#include <linux/timer.h>
#include <linux/jiffies.h>
+#include <linux/usb/otg.h>
static inline unsigned int get_irq_flags(struct resource *res)
{
static struct timer_list polling_timer;
static int polling;
+#ifdef CONFIG_USB_OTG_UTILS
+static struct otg_transceiver *transceiver;
+#endif
+static struct regulator *ac_draw;
+
enum {
PDA_PSY_OFFLINE = 0,
PDA_PSY_ONLINE = 1,
static void update_charger(void)
{
- if (!pdata->set_charge)
- return;
-
- if (new_ac_status > 0) {
- dev_dbg(dev, "charger on (AC)\n");
- pdata->set_charge(PDA_POWER_CHARGE_AC);
- } else if (new_usb_status > 0) {
- dev_dbg(dev, "charger on (USB)\n");
- pdata->set_charge(PDA_POWER_CHARGE_USB);
- } else {
- dev_dbg(dev, "charger off\n");
- pdata->set_charge(0);
+ static int regulator_enabled;
+ int max_uA = pdata->ac_max_uA;
+
+ if (pdata->set_charge) {
+ if (new_ac_status > 0) {
+ dev_dbg(dev, "charger on (AC)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_AC);
+ } else if (new_usb_status > 0) {
+ dev_dbg(dev, "charger on (USB)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_USB);
+ } else {
+ dev_dbg(dev, "charger off\n");
+ pdata->set_charge(0);
+ }
+ } else if (ac_draw) {
+ if (new_ac_status > 0) {
+ regulator_set_current_limit(ac_draw, max_uA, max_uA);
+ if (!regulator_enabled) {
+ dev_dbg(dev, "charger on (AC)\n");
+ regulator_enable(ac_draw);
+ regulator_enabled = 1;
+ }
+ } else {
+ if (regulator_enabled) {
+ dev_dbg(dev, "charger off\n");
+ regulator_disable(ac_draw);
+ regulator_enabled = 0;
+ }
+ }
}
}
jiffies + msecs_to_jiffies(pdata->polling_interval));
}
+#ifdef CONFIG_USB_OTG_UTILS
+static int otg_is_usb_online(void)
+{
+ return (transceiver->state == OTG_STATE_B_PERIPHERAL);
+}
+#endif
+
static int pda_power_probe(struct platform_device *pdev)
{
int ret = 0;
if (!pdata->polling_interval)
pdata->polling_interval = 2000;
+ if (!pdata->ac_max_uA)
+ pdata->ac_max_uA = 500000;
+
setup_timer(&charger_timer, charger_timer_func, 0);
setup_timer(&supply_timer, supply_timer_func, 0);
pda_psy_usb.num_supplicants = pdata->num_supplicants;
}
+ ac_draw = regulator_get(dev, "ac_draw");
+ if (IS_ERR(ac_draw)) {
+ dev_dbg(dev, "couldn't get ac_draw regulator\n");
+ ac_draw = NULL;
+ ret = PTR_ERR(ac_draw);
+ }
+
if (pdata->is_ac_online) {
ret = power_supply_register(&pdev->dev, &pda_psy_ac);
if (ret) {
}
}
+#ifdef CONFIG_USB_OTG_UTILS
+ transceiver = otg_get_transceiver();
+ if (transceiver && !pdata->is_usb_online) {
+ pdata->is_usb_online = otg_is_usb_online;
+ }
+#endif
+
if (pdata->is_usb_online) {
ret = power_supply_register(&pdev->dev, &pda_psy_usb);
if (ret) {
usb_supply_failed:
if (pdata->is_ac_online && ac_irq)
free_irq(ac_irq->start, &pda_psy_ac);
+#ifdef CONFIG_USB_OTG_UTILS
+ if (transceiver)
+ otg_put_transceiver(transceiver);
+#endif
ac_irq_failed:
if (pdata->is_ac_online)
power_supply_unregister(&pda_psy_ac);
ac_supply_failed:
+ if (ac_draw) {
+ regulator_put(ac_draw);
+ ac_draw = NULL;
+ }
if (pdata->exit)
pdata->exit(dev);
init_failed:
power_supply_unregister(&pda_psy_usb);
if (pdata->is_ac_online)
power_supply_unregister(&pda_psy_ac);
+#ifdef CONFIG_USB_OTG_UTILS
+ if (transceiver)
+ otg_put_transceiver(transceiver);
+#endif
+ if (ac_draw) {
+ regulator_put(ac_draw);
+ ac_draw = NULL;
+ }
if (pdata->exit)
pdata->exit(dev);
static int bq24022_is_enabled(struct regulator_dev *rdev)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
return !gpio_get_value(pdata->gpio_nce);
}
err = regulator_check_drms(rdev);
if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
- !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
- return;
+ !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
+ return;
/* get output voltage */
output_uV = rdev->desc->ops->get_voltage(rdev);
int cmin = constraints->min_uV;
int cmax = constraints->max_uV;
- /* it's safe to autoconfigure fixed-voltage supplies */
+ /* it's safe to autoconfigure fixed-voltage supplies
+ and the constraints are used by list_voltage. */
if (count == 1 && !cmin) {
- cmin = INT_MIN;
+ cmin = 1;
cmax = INT_MAX;
+ constraints->min_uV = cmin;
+ constraints->max_uV = cmax;
}
/* voltage constraints are optional */
if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
return ERR_PTR(-EINVAL);
- if (!regulator_desc->type == REGULATOR_VOLTAGE &&
- !regulator_desc->type == REGULATOR_CURRENT)
+ if (regulator_desc->type != REGULATOR_VOLTAGE &&
+ regulator_desc->type != REGULATOR_CURRENT)
return ERR_PTR(-EINVAL);
if (!init_data)
scrub:
device_unregister(&rdev->dev);
+ /* device core frees rdev */
+ rdev = ERR_PTR(ret);
+ goto out;
+
clean:
kfree(rdev);
rdev = ERR_PTR(ret);
.owner = THIS_MODULE,
},
.probe = da903x_regulator_probe,
- .remove = da903x_regulator_remove,
+ .remove = __devexit_p(da903x_regulator_remove),
};
static int __init da903x_regulator_init(void)
* sysfs_streq() doesn't need the \n's, but we add them so the strings
* will be shared with show_mode(), above.
*/
- if (sysfs_streq(buf, "fast\n") == 0)
+ if (sysfs_streq(buf, "fast\n"))
mode = REGULATOR_MODE_FAST;
- else if (sysfs_streq(buf, "normal\n") == 0)
+ else if (sysfs_streq(buf, "normal\n"))
mode = REGULATOR_MODE_NORMAL;
- else if (sysfs_streq(buf, "idle\n") == 0)
+ else if (sysfs_streq(buf, "idle\n"))
mode = REGULATOR_MODE_IDLE;
- else if (sysfs_streq(buf, "standby\n") == 0)
+ else if (sysfs_streq(buf, "standby\n"))
mode = REGULATOR_MODE_STANDBY;
else {
dev_err(dev, "Configuring invalid mode\n");
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on RTC_CLASS && SUPERH
+ depends on RTC_CLASS && SUPERH && HAVE_CLK
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
goto cleanup2;
}
- pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
- dev_name(&cmos_rtc.rtc->dev),
- is_valid_irq(rtc_irq)
- ? (cmos_rtc.mon_alrm
- ? "year"
- : (cmos_rtc.day_alrm
- ? "month" : "day"))
- : "no",
- cmos_rtc.century ? ", y3k" : "",
- nvram.size,
- is_hpet_enabled() ? ", hpet irqs" : "");
+ pr_info("%s: %s%s, %zd bytes nvram%s\n",
+ dev_name(&cmos_rtc.rtc->dev),
+ !is_valid_irq(rtc_irq) ? "no alarms" :
+ cmos_rtc.mon_alrm ? "alarms up to one year" :
+ cmos_rtc.day_alrm ? "alarms up to one month" :
+ "alarms up to one day",
+ cmos_rtc.century ? ", y3k" : "",
+ nvram.size,
+ is_hpet_enabled() ? ", hpet irqs" : "");
return 0;
.set_alarm = pl030_set_alarm,
};
-static int pl030_probe(struct amba_device *dev, void *id)
+static int pl030_probe(struct amba_device *dev, struct amba_id *id)
{
struct pl030_rtc *rtc;
int ret;
return 0;
}
-static int pl031_probe(struct amba_device *adev, void *id)
+static int pl031_probe(struct amba_device *adev, struct amba_id *id)
{
int ret;
struct pl031_local *ldata;
/*
* SuperH On-Chip RTC Support
*
- * Copyright (C) 2006, 2007, 2008 Paul Mundt
+ * Copyright (C) 2006 - 2009 Paul Mundt
* Copyright (C) 2006 Jamie Lenehan
* Copyright (C) 2008 Angelo Castello
*
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/log2.h>
+#include <linux/clk.h>
#include <asm/rtc.h>
#define DRV_NAME "sh-rtc"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
#define RTC_REG(r) ((r) * rtc_reg_size)
#define RCR2_START 0x01 /* Start bit */
struct sh_rtc {
- void __iomem *regbase;
- unsigned long regsize;
- struct resource *res;
- int alarm_irq;
- int periodic_irq;
- int carry_irq;
- struct rtc_device *rtc_dev;
- spinlock_t lock;
- unsigned long capabilities; /* See asm-sh/rtc.h for cap bits */
- unsigned short periodic_freq;
+ void __iomem *regbase;
+ unsigned long regsize;
+ struct resource *res;
+ int alarm_irq;
+ int periodic_irq;
+ int carry_irq;
+ struct clk *clk;
+ struct rtc_device *rtc_dev;
+ spinlock_t lock;
+ unsigned long capabilities; /* See asm/rtc.h for cap bits */
+ unsigned short periodic_freq;
};
static int __sh_rtc_interrupt(struct sh_rtc *rtc)
tmp = readb(rtc->regbase + RCR1);
- if (!enable)
- tmp &= ~RCR1_AIE;
- else
+ if (enable)
tmp |= RCR1_AIE;
+ else
+ tmp &= ~RCR1_AIE;
writeb(tmp, rtc->regbase + RCR1);
{
if (!is_power_of_2(freq))
return -EINVAL;
+
return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
}
struct sh_rtc *rtc;
struct resource *res;
struct rtc_time r;
- int ret;
+ char clk_name[6];
+ int clk_id, ret;
rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
if (unlikely(!rtc))
dev_err(&pdev->dev, "No IRQ resource\n");
goto err_badres;
}
+
rtc->periodic_irq = ret;
rtc->carry_irq = platform_get_irq(pdev, 1);
rtc->alarm_irq = platform_get_irq(pdev, 2);
goto err_badres;
}
- rtc->regsize = res->end - res->start + 1;
+ rtc->regsize = resource_size(res);
rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name);
if (unlikely(!rtc->res)) {
goto err_badmap;
}
+ clk_id = pdev->id;
+ /* With a single device, the clock id is still "rtc0" */
+ if (clk_id < 0)
+ clk_id = 0;
+
+ snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id);
+
+ rtc->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(rtc->clk)) {
+ /*
+ * No error handling for rtc->clk intentionally, not all
+ * platforms will have a unique clock for the RTC, and
+ * the clk API can handle the struct clk pointer being
+ * NULL.
+ */
+ rtc->clk = NULL;
+ }
+
+ clk_enable(rtc->clk);
+
rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
&sh_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc_dev)) {
return 0;
err_unmap:
+ clk_disable(rtc->clk);
+ clk_put(rtc->clk);
iounmap(rtc->regbase);
err_badmap:
release_resource(rtc->res);
sh_rtc_setcie(&pdev->dev, 0);
free_irq(rtc->periodic_irq, rtc);
+
if (rtc->carry_irq > 0) {
free_irq(rtc->carry_irq, rtc);
free_irq(rtc->alarm_irq, rtc);
iounmap(rtc->regbase);
+ clk_disable(rtc->clk);
+ clk_put(rtc->clk);
+
platform_set_drvdata(pdev, NULL);
kfree(rtc);
struct sh_rtc *rtc = platform_get_drvdata(pdev);
set_irq_wake(rtc->periodic_irq, enabled);
+
if (rtc->carry_irq > 0) {
set_irq_wake(rtc->carry_irq, enabled);
set_irq_wake(rtc->alarm_irq, enabled);
}
-
}
static int sh_rtc_suspend(struct device *dev)
{
irqstat = rtc_irq_bits;
- /* REVISIT alarm may need to wake us from sleep */
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
- BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
return 0;
}
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/hdreg.h>
+#include <linux/async.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
if (rc && rc != -EAGAIN)
device->target = device->state;
- if (device->state == device->target)
+ if (device->state == device->target) {
wake_up(&dasd_init_waitq);
+ dasd_put_device(device);
+ }
/* let user-space know that the device status changed */
kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE);
*/
void dasd_set_target_state(struct dasd_device *device, int target)
{
+ dasd_get_device(device);
/* If we are in probeonly mode stop at DASD_STATE_READY. */
if (dasd_probeonly && target > DASD_STATE_READY)
target = DASD_STATE_READY;
if (device->target != target) {
- if (device->state == target)
+ if (device->state == target) {
wake_up(&dasd_init_waitq);
+ dasd_put_device(device);
+ }
device->target = target;
}
if (device->state != device->target)
* SECTION: common functions for ccw_driver use
*/
+static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
+{
+ struct ccw_device *cdev = data;
+ int ret;
+
+ ret = ccw_device_set_online(cdev);
+ if (ret)
+ pr_warning("%s: Setting the DASD online failed with rc=%d\n",
+ dev_name(&cdev->dev), ret);
+ else {
+ struct dasd_device *device = dasd_device_from_cdev(cdev);
+ wait_event(dasd_init_waitq, _wait_for_device(device));
+ dasd_put_device(device);
+ }
+}
+
/*
* Initial attempt at a probe function. this can be simplified once
* the other detection code is gone.
*/
if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
(dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0))
- ret = ccw_device_set_online(cdev);
- if (ret)
- pr_warning("%s: Setting the DASD online failed with rc=%d\n",
- dev_name(&cdev->dev), ret);
+ async_schedule(dasd_generic_auto_online, cdev);
return 0;
}
} else
pr_debug("dasd_generic device %s found\n",
dev_name(&cdev->dev));
-
- /* FIXME: we have to wait for the root device but we don't want
- * to wait for each single device but for all at once. */
- wait_event(dasd_init_waitq, _wait_for_device(device));
-
dasd_put_device(device);
-
return rc;
}
ccw++;
recid += count;
new_track = 0;
+ /* first idaw for a ccw may start anywhere */
+ if (!idaw_dst)
+ idaw_dst = dst;
}
- /* If we start a new idaw, everything is fine and the
- * start of the new idaw is the start of this segment.
+ /* If we start a new idaw, we must make sure that it
+ * starts on an IDA_BLOCK_SIZE boundary.
* If we continue an idaw, we must make sure that the
* current segment begins where the so far accumulated
* idaw ends
*/
- if (!idaw_dst)
- idaw_dst = dst;
+ if (!idaw_dst) {
+ if (__pa(dst) & (IDA_BLOCK_SIZE-1)) {
+ dasd_sfree_request(cqr, startdev);
+ return ERR_PTR(-ERANGE);
+ } else
+ idaw_dst = dst;
+ }
if ((idaw_dst + idaw_len) != dst) {
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-ERANGE);
extern void tape_state_set(struct tape_device *, enum tape_state);
extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
-extern int tape_generic_offline(struct tape_device *device);
+extern int tape_generic_offline(struct ccw_device *);
/* Externals from tape_devmap.c */
extern int tape_generic_probe(struct ccw_device *);
);
}
-static int
-tape_34xx_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_34xx_driver = {
.name = "tape_34xx",
.owner = THIS_MODULE,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
.set_online = tape_34xx_online,
- .set_offline = tape_34xx_offline,
+ .set_offline = tape_generic_offline,
};
static int
&tape_discipline_3590);
}
-static int
-tape_3590_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_3590_driver = {
.name = "tape_3590",
.owner = THIS_MODULE,
.ids = tape_3590_ids,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
- .set_offline = tape_3590_offline,
+ .set_offline = tape_generic_offline,
.set_online = tape_3590_online,
};
* Manual offline is only allowed while the drive is not in use.
*/
int
-tape_generic_offline(struct tape_device *device)
+tape_generic_offline(struct ccw_device *cdev)
{
+ struct tape_device *device;
+
+ device = cdev->dev.driver_data;
if (!device) {
return -ENODEV;
}
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
}
-static void qdio_call_shutdown(struct work_struct *work)
-{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
-
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
- put_device(&cdev->dev);
-}
-
-static void qdio_int_error(struct ccw_device *cdev)
-{
- struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
- switch (irq_ptr->state) {
- case QDIO_IRQ_STATE_INACTIVE:
- case QDIO_IRQ_STATE_CLEANUP:
- qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
- break;
- case QDIO_IRQ_STATE_ESTABLISHED:
- case QDIO_IRQ_STATE_ACTIVE:
- qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
- if (get_device(&cdev->dev)) {
- /* Can't call shutdown from interrupt context. */
- PREPARE_WORK(&cdev->private->kick_work,
- qdio_call_shutdown);
- queue_work(ccw_device_work, &cdev->private->kick_work);
- }
- break;
- default:
- WARN_ON(1);
- }
- wake_up(&cdev->private->wait_q);
-}
-
static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
int dstat)
{
switch (PTR_ERR(irb)) {
case -EIO:
DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
- return;
- case -ETIMEDOUT:
- DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no);
- qdio_int_error(cdev);
+ qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+ wake_up(&cdev->private->wait_q);
return;
default:
WARN_ON(1);
case QDIO_IRQ_STATE_ACTIVE:
if (cstat & SCHN_STAT_PCI) {
qdio_int_handler_pci(irq_ptr);
- /* no state change so no need to wake up wait_q */
return;
}
if ((cstat & ~SCHN_STAT_PCI) || dstat) {
ccw_device_set_online(adapter->ccw_device);
zfcp_erp_wait(adapter);
- wait_event(adapter->erp_done_wqh,
- !(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING));
+ flush_work(&unit->scsi_work);
down(&zfcp_data.config_sema);
zfcp_unit_put(unit);
atomic_set(&unit->refcount, 0);
init_waitqueue_head(&unit->remove_wq);
+ INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
unit->port = port;
unit->fcp_lun = fcp_lun;
atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
+ zfcp_fc_nameserver_init(adapter);
+
if (!zfcp_adapter_scsi_register(adapter))
return 0;
cancel_work_sync(&adapter->scan_work);
cancel_work_sync(&adapter->stat_work);
- cancel_delayed_work_sync(&adapter->nsp.work);
zfcp_adapter_scsi_unregister(adapter);
sysfs_remove_group(&adapter->ccw_device->dev.kobj,
&zfcp_sysfs_adapter_attrs);
list_del(&port->list);
write_unlock_irq(&zfcp_data.config_lock);
if (port->rport)
- fc_remote_port_delete(port->rport);
- port->rport = NULL;
+ port->rport->dd_data = NULL;
zfcp_adapter_put(port->adapter);
sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs);
device_unregister(&port->sysfs_device);
/* initialize request counter */
BUG_ON(!zfcp_reqlist_isempty(adapter));
adapter->req_no = 0;
- zfcp_fc_nameserver_init(adapter);
zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL,
ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
* Userspace interface for accessing the
* Access Control Lists / Control File Data Channel
*
- * Copyright IBM Corporation 2008
+ * Copyright IBM Corporation 2008, 2009
*/
#define KMSG_COMPONENT "zfcp"
retval = -ENXIO;
goto free_buffer;
}
+ zfcp_adapter_get(adapter);
retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
data_user->control_file);
/* logical unit status */
#define ZFCP_STATUS_UNIT_SHARED 0x00000004
#define ZFCP_STATUS_UNIT_READONLY 0x00000008
-#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020
/* FSF request status (this does not have a common part) */
#define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002
struct zfcp_erp_action erp_action; /* pending error recovery */
atomic_t erp_counter;
struct zfcp_latencies latencies;
+ struct work_struct scsi_work;
};
/* FSF request */
zfcp_qdio_close(adapter);
zfcp_fsf_req_dismiss_all(adapter);
adapter->fsf_req_seq_no = 0;
+ zfcp_fc_wka_port_force_offline(&adapter->nsp);
/* all ports and units are closed */
zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL,
ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
}
}
-struct zfcp_erp_add_work {
- struct zfcp_unit *unit;
- struct work_struct work;
-};
-
-static void zfcp_erp_scsi_scan(struct work_struct *work)
-{
- struct zfcp_erp_add_work *p =
- container_of(work, struct zfcp_erp_add_work, work);
- struct zfcp_unit *unit = p->unit;
- struct fc_rport *rport = unit->port->rport;
-
- if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
- scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
- scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
- atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- zfcp_unit_put(unit);
- wake_up(&unit->port->adapter->erp_done_wqh);
- kfree(p);
-}
-
-static void zfcp_erp_schedule_work(struct zfcp_unit *unit)
-{
- struct zfcp_erp_add_work *p;
-
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (!p) {
- dev_err(&unit->port->adapter->ccw_device->dev,
- "Registering unit 0x%016Lx on port 0x%016Lx failed\n",
- (unsigned long long)unit->fcp_lun,
- (unsigned long long)unit->port->wwpn);
- return;
- }
-
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- INIT_WORK(&p->work, zfcp_erp_scsi_scan);
- p->unit = unit;
- if (!queue_work(zfcp_data.work_queue, &p->work))
- zfcp_unit_put(unit);
-}
-
static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
{
struct zfcp_adapter *adapter = act->adapter;
switch (act->action) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- flush_work(&port->rport_work);
if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
- if (!(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING))
- zfcp_erp_schedule_work(unit);
+ zfcp_unit_get(unit);
+ if (scsi_queue_work(unit->port->adapter->scsi_host,
+ &unit->scsi_work) <= 0)
+ zfcp_unit_put(unit);
}
zfcp_unit_put(unit);
break;
while (!(atomic_read(&adapter->status) &
ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) {
+
+ zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
+ ignore = down_interruptible(&adapter->erp_ready_sem);
+ zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
+
write_lock_irqsave(&adapter->erp_lock, flags);
next = adapter->erp_ready_head.next;
write_unlock_irqrestore(&adapter->erp_lock, flags);
if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED)
zfcp_erp_wakeup(adapter);
}
-
- zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
- ignore = down_interruptible(&adapter->erp_ready_sem);
- zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
}
atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status);
extern void zfcp_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
extern void zfcp_fc_nameserver_init(struct zfcp_adapter *);
+extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *);
extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *);
+extern void zfcp_scsi_scan(struct work_struct *);
/* zfcp_sysfs.c */
extern struct attribute_group zfcp_sysfs_unit_attrs;
struct zfcp_wka_port *wka_port =
container_of(dw, struct zfcp_wka_port, work);
- /* Don't wait forvever. If the wka_port is too busy take it offline
- through a new call later */
- if (!wait_event_timeout(wka_port->completion_wq,
- atomic_read(&wka_port->refcount) == 0,
- HZ >> 1))
- return;
-
mutex_lock(&wka_port->mutex);
if ((atomic_read(&wka_port->refcount) != 0) ||
(wka_port->status != ZFCP_WKA_PORT_ONLINE))
INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline);
}
+void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka)
+{
+ cancel_delayed_work_sync(&wka->work);
+ mutex_lock(&wka->mutex);
+ wka->status = ZFCP_WKA_PORT_OFFLINE;
+ mutex_unlock(&wka->mutex);
+}
+
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
if (adisc->els.status) {
/* request rejected or timed out */
- zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL);
+ zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
+ "fcadh_1", NULL);
goto out;
}
container_of(work, struct zfcp_port, test_link_work);
int retval;
- if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) {
- zfcp_port_put(port);
- return; /* port erp is running and will update rport status */
- }
-
zfcp_port_get(port);
port->rport_task = RPORT_DEL;
zfcp_scsi_rport_work(&port->rport_work);
{
struct zfcp_adapter *adapter = port->adapter;
+ if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC))
+ return;
+
atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status);
if ((port->supported_classes != 0) ||
if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
continue;
port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
- if (port) {
- zfcp_port_get(port);
+ if (port)
continue;
- }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_COMMON_NOESC, d_id);
max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES;
max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE;
- if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
+ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
+ fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
return 0;
ret = zfcp_wka_port_get(&adapter->nsp);
struct fsf_link_down_info *link_down)
{
struct zfcp_adapter *adapter = req->adapter;
+ unsigned long flags;
if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
return;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
+
+ read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_scsi_schedule_rports_block(adapter);
+ read_unlock_irqrestore(&zfcp_data.config_lock, flags);
if (!link_down)
goto out;
}
}
-static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
- __releases(&adapter->req_q_lock)
- __acquires(&adapter->req_q_lock)
+static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter)
{
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- long ret;
- if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE)
- return -EIO;
- if (atomic_read(&req_q->count) > 0)
- return 0;
+ spin_lock_bh(&adapter->req_q_lock);
+ if (atomic_read(&req_q->count))
+ return 1;
+ spin_unlock_bh(&adapter->req_q_lock);
+ return 0;
+}
+
+static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
+{
+ long ret;
- atomic_dec(&req_q->count);
spin_unlock_bh(&adapter->req_q_lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
- atomic_read(&req_q->count) >= 0,
- 5 * HZ);
- spin_lock_bh(&adapter->req_q_lock);
- atomic_inc(&req_q->count);
-
+ zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
if (!ret)
atomic_inc(&adapter->qdio_outb_full);
+
+ spin_lock_bh(&adapter->req_q_lock);
return -EIO;
}
static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
- unsigned long flags;
- int idx;
+ unsigned long flags;
+ int idx;
+ int with_qtcb = (req->qtcb != NULL);
/* put allocated FSF request into hash table */
spin_lock_irqsave(&adapter->req_list_lock, flags);
}
/* Don't increase for unsolicited status */
- if (req->qtcb)
+ if (with_qtcb)
adapter->fsf_req_seq_no++;
adapter->req_no++;
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
sbale = zfcp_qdio_sbale_req(req);
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
+ return retval;
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
return retval;
}
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
if (data)
req->handler = zfcp_fsf_exchange_port_data_handler;
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
+
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
return retval;
+
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
+ return retval;
}
static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req)
{
- if (req->qtcb->header.fsf_status != FSF_GOOD)
- req->status |= ZFCP_STATUS_FSFREQ_ERROR;
}
/**
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
old_req_id);
- return SUCCESS;
+ return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
*/
static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
write_lock_irq(&zfcp_data.config_lock);
- port->rport = NULL;
+ port = rport->dd_data;
+ if (port)
+ port->rport = NULL;
write_unlock_irq(&zfcp_data.config_lock);
}
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
+
+ write_lock_irq(&zfcp_data.config_lock);
+ port = rport->dd_data;
+ if (port)
+ zfcp_port_get(port);
+ write_unlock_irq(&zfcp_data.config_lock);
- zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ if (port) {
+ zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ zfcp_port_put(port);
+ }
}
static void zfcp_scsi_rport_register(struct zfcp_port *port)
static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
- if (port->rport)
- fc_remote_port_delete(port->rport);
+ struct fc_rport *rport = port->rport;
+
+ if (rport)
+ fc_remote_port_delete(rport);
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
}
+void zfcp_scsi_scan(struct work_struct *work)
+{
+ struct zfcp_unit *unit = container_of(work, struct zfcp_unit,
+ scsi_work);
+ struct fc_rport *rport;
+
+ flush_work(&unit->port->rport_work);
+ rport = unit->port->rport;
+
+ if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+ scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+ scsilun_to_int((struct scsi_lun *)
+ &unit->fcp_lun), 0);
+
+ zfcp_unit_put(unit);
+}
+
struct fc_function_template zfcp_transport_functions = {
.show_starget_port_id = 1,
.show_starget_port_name = 1,
write_lock_irq(&zfcp_data.config_lock);
unit = zfcp_get_unit_by_lun(port, fcp_lun);
- if (unit && (atomic_read(&unit->refcount) == 0)) {
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
- list_move(&unit->list, &unit_remove_lh);
- } else
- unit = NULL;
+ if (unit) {
+ write_unlock_irq(&zfcp_data.config_lock);
+ /* wait for possible timeout during SCSI probe */
+ flush_work(&unit->scsi_work);
+ write_lock_irq(&zfcp_data.config_lock);
+
+ if (atomic_read(&unit->refcount) == 0) {
+ zfcp_unit_get(unit);
+ atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
+ &unit->status);
+ list_move(&unit->list, &unit_remove_lh);
+ } else {
+ unit = NULL;
+ }
+ }
write_unlock_irq(&zfcp_data.config_lock);
return 0;
}
-static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
- unsigned long arg)
+static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
{
+ lock_kernel();
int error = -ENOTTY;
void __user *argp = (void __user *)arg;
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
+ unlock_kernel();
return -EPERM;
+ }
switch (cmd) {
case JSFLASH_IDENT:
- if (copy_to_user(argp, &jsf0.id, JSFIDSZ))
+ if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) {
+ unlock_kernel();
return -EFAULT;
+ }
break;
case JSFLASH_ERASE:
error = jsf_ioctl_erase(arg);
break;
}
+ unlock_kernel();
return error;
}
.llseek = jsf_lseek,
.read = jsf_read,
.write = jsf_write,
- .ioctl = jsf_ioctl,
+ .unlocked_ioctl = jsf_ioctl,
.mmap = jsf_mmap,
.open = jsf_open,
.release = jsf_release,
static void uctrl_get_event_status(struct uctrl_driver *);
static void uctrl_get_external_status(struct uctrl_driver *);
-static int
-uctrl_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long
+uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
default:
static const struct file_operations uctrl_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = uctrl_ioctl,
+ .unlocked_ioctl = uctrl_ioctl,
.open = uctrl_open,
};
{
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
- scsi_dma_unmap(cmd);
+ if (cmd->SCp.phase == TW_PHASE_SGLIST)
+ scsi_dma_unmap(cmd);
} /* End twa_unmap_scsi_data() */
/* scsi_host_template initializer */
pci_set_master(pdev);
pci_try_set_mwi(pdev);
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
retval = -ENODEV;
goto out_disable_device;
Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Brad Strand <linux@3ware.com>
- Copyright (C) 1999-2007 3ware Inc.
+ Copyright (C) 1999-2009 3ware Inc.
Kernel compatiblity By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
{
dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
- scsi_dma_unmap(cmd);
+ if (cmd->SCp.phase == TW_PHASE_SGLIST)
+ scsi_dma_unmap(cmd);
} /* End tw_unmap_scsi_data() */
/* This function will reset a device extension */
Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Brad Strand <linux@3ware.com>
- Copyright (C) 1999-2007 3ware Inc.
+ Copyright (C) 1999-2009 3ware Inc.
Kernel compatiblity By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
---help---
Fibre Channel over Ethernet module
+config FCOE_FNIC
+ tristate "Cisco FNIC Driver"
+ depends on PCI && X86
+ select LIBFC
+ help
+ This is support for the Cisco PCI-Express FCoE HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called fnic.
+
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
obj-$(CONFIG_LIBFC) += libfc/
obj-$(CONFIG_LIBFCOE) += fcoe/
obj-$(CONFIG_FCOE) += fcoe/
+obj-$(CONFIG_FCOE_FNIC) += fnic/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o
a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
-1, NULL, 0);
if (IS_ERR(a4000t_scsi_device)) {
- platform_driver_register(&a4000t_scsi_driver);
+ platform_driver_unregister(&a4000t_scsi_driver);
return PTR_ERR(a4000t_scsi_device);
}
if (dev->nondasd_support && !dev->in_reset)
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
- if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK)
+ if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
dev->needs_dac = 1;
dev->dac_support = 0;
if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
#include "cxgb3i_offload.h"
#include "cxgb3i_ddp.h"
-#define CXGB3I_SCSI_QDEPTH_DFLT 128
+#define CXGB3I_SCSI_HOST_QDEPTH 1024
#define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN
#define CXGB3I_MAX_LUN 512
#define ISCSI_PDU_NONPAYLOAD_MAX \
}
static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp,
- int start, int max, int count,
+ unsigned int start, unsigned int max,
+ unsigned int count,
struct cxgb3i_gather_list *gl)
{
- unsigned int i, j;
+ unsigned int i, j, k;
+ /* not enough entries */
+ if ((max - start) < count)
+ return -EBUSY;
+
+ max -= count;
spin_lock(&ddp->map_lock);
- for (i = start; i <= max;) {
- for (j = 0; j < count; j++) {
- if (ddp->gl_map[i + j])
+ for (i = start; i < max;) {
+ for (j = 0, k = i; j < count; j++, k++) {
+ if (ddp->gl_map[k])
break;
}
if (j == count) {
- for (j = 0; j < count; j++)
- ddp->gl_map[i + j] = gl;
+ for (j = 0, k = i; j < count; j++, k++)
+ ddp->gl_map[k] = gl;
spin_unlock(&ddp->map_lock);
return i;
}
struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
struct pagepod_hdr hdr;
unsigned int npods;
- int idx = -1, idx_max;
+ int idx = -1;
int err = -ENOMEM;
u32 sw_tag = *tagp;
u32 tag;
}
npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT;
- idx_max = ddp->nppods - npods + 1;
if (ddp->idx_last == ddp->nppods)
- idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl);
+ idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl);
else {
idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1,
- idx_max, npods, gl);
- if (idx < 0 && ddp->idx_last >= npods)
+ ddp->nppods, npods, gl);
+ if (idx < 0 && ddp->idx_last >= npods) {
idx = ddp_find_unused_entries(ddp, 0,
- ddp->idx_last - npods + 1,
+ min(ddp->idx_last + npods, ddp->nppods),
npods, gl);
+ }
}
if (idx < 0) {
ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n",
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
+ .can_queue = CXGB3I_SCSI_HOST_QDEPTH,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
- .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT,
+ .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler = iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.this_id = -1,
};
c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
c3cn, c3cn->write_seq, c3cn->snd_una,
cxgb3_snd_win);
- err = -EAGAIN;
+ err = -ENOBUFS;
goto out_err;
}
out_err:
if (copied == 0 && err == -EPIPE)
copied = c3cn->err ? c3cn->err : -EPIPE;
+ else
+ copied = err;
goto done;
}
return 0;
}
- if (err < 0 && err != -EAGAIN) {
- kfree_skb(skb);
- cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
- task->itt, skb, skb->len, skb->data_len, err);
- iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
- iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ if (err == -EAGAIN || err == -ENOBUFS) {
+ /* reset skb to send when we are called again */
+ tdata->skb = skb;
return err;
}
- /* reset skb to send when we are called again */
- tdata->skb = skb;
- return -EAGAIN;
+
+ kfree_skb(skb);
+ cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
+ task->itt, skb, skb->len, skb->data_len, err);
+ iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
+ iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ return err;
}
int cxgb3i_pdu_init(void)
DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
-/* Function Prototyes */
+/* Function Prototypes */
static int fcoe_reset(struct Scsi_Host *shost);
static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
static int fcoe_rcv(struct sk_buff *, struct net_device *,
/**
* fcoe_lport_config() - sets up the fc_lport
* @lp: ptr to the fc_lport
- * @shost: ptr to the parent scsi host
*
* Returns: 0 for success
*/
rtnl_lock();
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+ dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
/*
dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
- /* Free the per-CPU revieve threads */
+ /* Free the per-CPU receive threads */
fcoe_percpu_clean(lp);
/* Free existing skbs */
}
#else
/*
- * This a non-SMP scenario where the singluar Rx thread is
+ * This a non-SMP scenario where the singular Rx thread is
* being removed. Free all skbs and stop the thread.
*/
spin_lock_bh(&p->fcoe_rx_list.lock);
* @skb: the receive skb
* @dev: associated net device
* @ptype: context
- * @odldev: last device
+ * @olddev: last device
*
* this function will receive the packet and build fc frame and pass it up
*
kfree_skb(skb);
return -1;
}
-EXPORT_SYMBOL_GPL(fcoe_rcv);
/**
* fcoe_start_io() - pass to netdev to start xmit for fcoe
}
/**
- * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof
* @skb: the skb to be xmitted
* @tlen: total len
*
/**
* fcoe_fc_crc() - calculates FC CRC in this fcoe skb
- * @fp: the fc_frame containg data to be checksummed
+ * @fp: the fc_frame containing data to be checksummed
*
* This uses crc32() to calculate the crc for fc frame
* Return : 32 bit crc
wlen = skb->len / FCOE_WORD_TO_BYTE;
if (!lp->link_up) {
- kfree(skb);
+ kfree_skb(skb);
return 0;
}
cp = NULL;
}
- /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */
+ /* adjust skb network/transport offsets to match mac/fcoe/fc */
skb_push(skb, elen + hlen);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_xmit);
/**
* fcoe_percpu_receive_thread() - recv thread per cpu
/**
- * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
+ * fcoe_check_wait_queue() - attempt to clear the transmit backlog
+ * @lp: the fc_lport
*
* This empties the wait_queue, dequeue the head of the wait_queue queue
* and calls fcoe_start_io() for each packet, if all skb have been
* transmitted, return qlen or -1 if a error occurs, then restore
- * wait_queue and try again later.
+ * wait_queue and try again later.
*
* The wait_queue is used when the skb transmit fails. skb will go
- * in the wait_queue which will be emptied by the time function OR
+ * in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
*
* Returns: 0 for success
*/
static void fcoe_dev_setup()
{
- /*
- * here setup a interface specific wd time to
- * monitor the link state
- */
register_netdevice_notifier(&fcoe_notifier);
}
/**
* fcoe_if_to_netdev() - parse a name buffer to get netdev
- * @ifname: fixed array for output parsed ifname
* @buffer: incoming buffer to be copied
*
- * Returns: NULL or ptr to netdeive
+ * Returns: NULL or ptr to net_device
*/
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
}
/**
- * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev
* @netdev: the target netdev
*
* Returns: ptr to the struct module, NULL for failure
* Holds the Ethernet driver module by try_module_get() for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_get(const struct net_device *netdev)
{
* Releases the Ethernet driver module by module_put for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_put(const struct net_device *netdev)
{
/**
* fcoe_destroy() - handles the destroy from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
/**
* fcoe_create() - Handles the create call from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
return rc;
}
-EXPORT_SYMBOL_GPL(fcoe_link_ok);
/**
* fcoe_percpu_clean() - Clear the pending skbs for an lport
spin_unlock_bh(&pp->fcoe_rx_list.lock);
}
}
-EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
/**
* fcoe_clean_pending_queue() - Dequeue a skb and free it
}
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
}
-EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
* fcoe_reset() - Resets the fcoe
fc_lport_reset(lport);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_reset);
/**
* fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
- * @device: this is currently ptr to net_device
+ * @dev: this is currently ptr to net_device
*
* Returns: NULL or the located fcoe_softc
*/
return (fc) ? fc->ctlr.lp : NULL;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
/**
* fcoe_hostlist_add() - Add a lport to lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be added
*
* Returns: 0 for success
*/
}
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
/**
* fcoe_hostlist_remove() - remove a lport from lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be removed
*
* Returns: 0 for success
*/
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
/**
* fcoe_init() - fcoe module loading initialization
}
/**
- * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller.
+ * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller.
* @fip: FCoE controller.
*
* This is called by FCoE drivers before freeing the &fcoe_ctlr.
--- /dev/null
+obj-$(CONFIG_FCOE_FNIC) += fnic.o
+
+fnic-y := \
+ fnic_attrs.o \
+ fnic_isr.o \
+ fnic_main.o \
+ fnic_res.o \
+ fnic_fcs.o \
+ fnic_scsi.o \
+ vnic_cq.o \
+ vnic_dev.o \
+ vnic_intr.o \
+ vnic_rq.o \
+ vnic_wq_copy.o \
+ vnic_wq.o
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_DESC_H_
+#define _CQ_DESC_H_
+
+/*
+ * Completion queue descriptor types
+ */
+enum cq_desc_types {
+ CQ_DESC_TYPE_WQ_ENET = 0,
+ CQ_DESC_TYPE_DESC_COPY = 1,
+ CQ_DESC_TYPE_WQ_EXCH = 2,
+ CQ_DESC_TYPE_RQ_ENET = 3,
+ CQ_DESC_TYPE_RQ_FCP = 4,
+};
+
+/* Completion queue descriptor: 16B
+ *
+ * All completion queues have this basic layout. The
+ * type_specfic area is unique for each completion
+ * queue type.
+ */
+struct cq_desc {
+ __le16 completed_index;
+ __le16 q_number;
+ u8 type_specfic[11];
+ u8 type_color;
+};
+
+#define CQ_DESC_TYPE_BITS 4
+#define CQ_DESC_TYPE_MASK ((1 << CQ_DESC_TYPE_BITS) - 1)
+#define CQ_DESC_COLOR_MASK 1
+#define CQ_DESC_COLOR_SHIFT 7
+#define CQ_DESC_Q_NUM_BITS 10
+#define CQ_DESC_Q_NUM_MASK ((1 << CQ_DESC_Q_NUM_BITS) - 1)
+#define CQ_DESC_COMP_NDX_BITS 12
+#define CQ_DESC_COMP_NDX_MASK ((1 << CQ_DESC_COMP_NDX_BITS) - 1)
+
+static inline void cq_desc_dec(const struct cq_desc *desc_arg,
+ u8 *type, u8 *color, u16 *q_number, u16 *completed_index)
+{
+ const struct cq_desc *desc = desc_arg;
+ const u8 type_color = desc->type_color;
+
+ *color = (type_color >> CQ_DESC_COLOR_SHIFT) & CQ_DESC_COLOR_MASK;
+
+ /*
+ * Make sure color bit is read from desc *before* other fields
+ * are read from desc. Hardware guarantees color bit is last
+ * bit (byte) written. Adding the rmb() prevents the compiler
+ * and/or CPU from reordering the reads which would potentially
+ * result in reading stale values.
+ */
+
+ rmb();
+
+ *type = type_color & CQ_DESC_TYPE_MASK;
+ *q_number = le16_to_cpu(desc->q_number) & CQ_DESC_Q_NUM_MASK;
+ *completed_index = le16_to_cpu(desc->completed_index) &
+ CQ_DESC_COMP_NDX_MASK;
+}
+
+#endif /* _CQ_DESC_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_ENET_DESC_H_
+#define _CQ_ENET_DESC_H_
+
+#include "cq_desc.h"
+
+/* Ethernet completion queue descriptor: 16B */
+struct cq_enet_wq_desc {
+ __le16 completed_index;
+ __le16 q_number;
+ u8 reserved[11];
+ u8 type_color;
+};
+
+static inline void cq_enet_wq_desc_dec(struct cq_enet_wq_desc *desc,
+ u8 *type, u8 *color, u16 *q_number, u16 *completed_index)
+{
+ cq_desc_dec((struct cq_desc *)desc, type,
+ color, q_number, completed_index);
+}
+
+/* Completion queue descriptor: Ethernet receive queue, 16B */
+struct cq_enet_rq_desc {
+ __le16 completed_index_flags;
+ __le16 q_number_rss_type_flags;
+ __le32 rss_hash;
+ __le16 bytes_written_flags;
+ __le16 vlan;
+ __le16 checksum_fcoe;
+ u8 flags;
+ u8 type_color;
+};
+
+#define CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT (0x1 << 12)
+#define CQ_ENET_RQ_DESC_FLAGS_FCOE (0x1 << 13)
+#define CQ_ENET_RQ_DESC_FLAGS_EOP (0x1 << 14)
+#define CQ_ENET_RQ_DESC_FLAGS_SOP (0x1 << 15)
+
+#define CQ_ENET_RQ_DESC_RSS_TYPE_BITS 4
+#define CQ_ENET_RQ_DESC_RSS_TYPE_MASK \
+ ((1 << CQ_ENET_RQ_DESC_RSS_TYPE_BITS) - 1)
+#define CQ_ENET_RQ_DESC_RSS_TYPE_NONE 0
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv4 1
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4 2
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6 3
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6 4
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX 5
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX 6
+
+#define CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC (0x1 << 14)
+
+#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS 14
+#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK \
+ ((1 << CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FLAGS_TRUNCATED (0x1 << 14)
+#define CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED (0x1 << 15)
+
+#define CQ_ENET_RQ_DESC_FCOE_SOF_BITS 4
+#define CQ_ENET_RQ_DESC_FCOE_SOF_MASK \
+ ((1 << CQ_ENET_RQ_DESC_FCOE_SOF_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FCOE_EOF_BITS 8
+#define CQ_ENET_RQ_DESC_FCOE_EOF_MASK \
+ ((1 << CQ_ENET_RQ_DESC_FCOE_EOF_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT 8
+
+#define CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK (0x1 << 0)
+#define CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK (0x1 << 0)
+#define CQ_ENET_RQ_DESC_FLAGS_UDP (0x1 << 1)
+#define CQ_ENET_RQ_DESC_FCOE_ENC_ERROR (0x1 << 1)
+#define CQ_ENET_RQ_DESC_FLAGS_TCP (0x1 << 2)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK (0x1 << 3)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV6 (0x1 << 4)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4 (0x1 << 5)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT (0x1 << 6)
+#define CQ_ENET_RQ_DESC_FLAGS_FCS_OK (0x1 << 7)
+
+static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
+ u8 *type, u8 *color, u16 *q_number, u16 *completed_index,
+ u8 *ingress_port, u8 *fcoe, u8 *eop, u8 *sop, u8 *rss_type,
+ u8 *csum_not_calc, u32 *rss_hash, u16 *bytes_written, u8 *packet_error,
+ u8 *vlan_stripped, u16 *vlan, u16 *checksum, u8 *fcoe_sof,
+ u8 *fcoe_fc_crc_ok, u8 *fcoe_enc_error, u8 *fcoe_eof,
+ u8 *tcp_udp_csum_ok, u8 *udp, u8 *tcp, u8 *ipv4_csum_ok,
+ u8 *ipv6, u8 *ipv4, u8 *ipv4_fragment, u8 *fcs_ok)
+{
+ u16 completed_index_flags = le16_to_cpu(desc->completed_index_flags);
+ u16 q_number_rss_type_flags =
+ le16_to_cpu(desc->q_number_rss_type_flags);
+ u16 bytes_written_flags = le16_to_cpu(desc->bytes_written_flags);
+
+ cq_desc_dec((struct cq_desc *)desc, type,
+ color, q_number, completed_index);
+
+ *ingress_port = (completed_index_flags &
+ CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT) ? 1 : 0;
+ *fcoe = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_FCOE) ?
+ 1 : 0;
+ *eop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_EOP) ?
+ 1 : 0;
+ *sop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_SOP) ?
+ 1 : 0;
+
+ *rss_type = (u8)((q_number_rss_type_flags >> CQ_DESC_Q_NUM_BITS) &
+ CQ_ENET_RQ_DESC_RSS_TYPE_MASK);
+ *csum_not_calc = (q_number_rss_type_flags &
+ CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC) ? 1 : 0;
+
+ *rss_hash = le32_to_cpu(desc->rss_hash);
+
+ *bytes_written = bytes_written_flags &
+ CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK;
+ *packet_error = (bytes_written_flags &
+ CQ_ENET_RQ_DESC_FLAGS_TRUNCATED) ? 1 : 0;
+ *vlan_stripped = (bytes_written_flags &
+ CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED) ? 1 : 0;
+
+ *vlan = le16_to_cpu(desc->vlan);
+
+ if (*fcoe) {
+ *fcoe_sof = (u8)(le16_to_cpu(desc->checksum_fcoe) &
+ CQ_ENET_RQ_DESC_FCOE_SOF_MASK);
+ *fcoe_fc_crc_ok = (desc->flags &
+ CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
+ *fcoe_enc_error = (desc->flags &
+ CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
+ *fcoe_eof = (u8)((desc->checksum_fcoe >>
+ CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
+ CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
+ *checksum = 0;
+ } else {
+ *fcoe_sof = 0;
+ *fcoe_fc_crc_ok = 0;
+ *fcoe_enc_error = 0;
+ *fcoe_eof = 0;
+ *checksum = le16_to_cpu(desc->checksum_fcoe);
+ }
+
+ *tcp_udp_csum_ok =
+ (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK) ? 1 : 0;
+ *udp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_UDP) ? 1 : 0;
+ *tcp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP) ? 1 : 0;
+ *ipv4_csum_ok =
+ (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK) ? 1 : 0;
+ *ipv6 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV6) ? 1 : 0;
+ *ipv4 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4) ? 1 : 0;
+ *ipv4_fragment =
+ (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT) ? 1 : 0;
+ *fcs_ok = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ? 1 : 0;
+}
+
+#endif /* _CQ_ENET_DESC_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_EXCH_DESC_H_
+#define _CQ_EXCH_DESC_H_
+
+#include "cq_desc.h"
+
+/* Exchange completion queue descriptor: 16B */
+struct cq_exch_wq_desc {
+ u16 completed_index;
+ u16 q_number;
+ u16 exchange_id;
+ u8 tmpl;
+ u8 reserved0;
+ u32 reserved1;
+ u8 exch_status;
+ u8 reserved2[2];
+ u8 type_color;
+};
+
+#define CQ_EXCH_WQ_STATUS_BITS 2
+#define CQ_EXCH_WQ_STATUS_MASK ((1 << CQ_EXCH_WQ_STATUS_BITS) - 1)
+
+enum cq_exch_status_types {
+ CQ_EXCH_WQ_STATUS_TYPE_COMPLETE = 0,
+ CQ_EXCH_WQ_STATUS_TYPE_ABORT = 1,
+ CQ_EXCH_WQ_STATUS_TYPE_SGL_EOF = 2,
+ CQ_EXCH_WQ_STATUS_TYPE_TMPL_ERR = 3,
+};
+
+static inline void cq_exch_wq_desc_dec(struct cq_exch_wq_desc *desc_ptr,
+ u8 *type,
+ u8 *color,
+ u16 *q_number,
+ u16 *completed_index,
+ u8 *exch_status)
+{
+ cq_desc_dec((struct cq_desc *)desc_ptr, type,
+ color, q_number, completed_index);
+ *exch_status = desc_ptr->exch_status & CQ_EXCH_WQ_STATUS_MASK;
+}
+
+struct cq_fcp_rq_desc {
+ u16 completed_index_eop_sop_prt;
+ u16 q_number;
+ u16 exchange_id;
+ u16 tmpl;
+ u16 bytes_written;
+ u16 vlan;
+ u8 sof;
+ u8 eof;
+ u8 fcs_fer_fck;
+ u8 type_color;
+};
+
+#define CQ_FCP_RQ_DESC_FLAGS_SOP (1 << 15)
+#define CQ_FCP_RQ_DESC_FLAGS_EOP (1 << 14)
+#define CQ_FCP_RQ_DESC_FLAGS_PRT (1 << 12)
+#define CQ_FCP_RQ_DESC_TMPL_MASK 0x1f
+#define CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK 0x3fff
+#define CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT 14
+#define CQ_FCP_RQ_DESC_PACKET_ERR_MASK (1 << CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT)
+#define CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT 15
+#define CQ_FCP_RQ_DESC_VS_STRIPPED_MASK (1 << CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT)
+#define CQ_FCP_RQ_DESC_FC_CRC_OK_MASK 0x1
+#define CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT 1
+#define CQ_FCP_RQ_DESC_FCOE_ERR_MASK (1 << CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT)
+#define CQ_FCP_RQ_DESC_FCS_OK_SHIFT 7
+#define CQ_FCP_RQ_DESC_FCS_OK_MASK (1 << CQ_FCP_RQ_DESC_FCS_OK_SHIFT)
+
+static inline void cq_fcp_rq_desc_dec(struct cq_fcp_rq_desc *desc_ptr,
+ u8 *type,
+ u8 *color,
+ u16 *q_number,
+ u16 *completed_index,
+ u8 *eop,
+ u8 *sop,
+ u8 *fck,
+ u16 *exchange_id,
+ u16 *tmpl,
+ u32 *bytes_written,
+ u8 *sof,
+ u8 *eof,
+ u8 *ingress_port,
+ u8 *packet_err,
+ u8 *fcoe_err,
+ u8 *fcs_ok,
+ u8 *vlan_stripped,
+ u16 *vlan)
+{
+ cq_desc_dec((struct cq_desc *)desc_ptr, type,
+ color, q_number, completed_index);
+ *eop = (desc_ptr->completed_index_eop_sop_prt &
+ CQ_FCP_RQ_DESC_FLAGS_EOP) ? 1 : 0;
+ *sop = (desc_ptr->completed_index_eop_sop_prt &
+ CQ_FCP_RQ_DESC_FLAGS_SOP) ? 1 : 0;
+ *ingress_port =
+ (desc_ptr->completed_index_eop_sop_prt &
+ CQ_FCP_RQ_DESC_FLAGS_PRT) ? 1 : 0;
+ *exchange_id = desc_ptr->exchange_id;
+ *tmpl = desc_ptr->tmpl & CQ_FCP_RQ_DESC_TMPL_MASK;
+ *bytes_written =
+ desc_ptr->bytes_written & CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK;
+ *packet_err =
+ (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_PACKET_ERR_MASK) >>
+ CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT;
+ *vlan_stripped =
+ (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_VS_STRIPPED_MASK) >>
+ CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT;
+ *vlan = desc_ptr->vlan;
+ *sof = desc_ptr->sof;
+ *fck = desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FC_CRC_OK_MASK;
+ *fcoe_err = (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCOE_ERR_MASK) >>
+ CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT;
+ *eof = desc_ptr->eof;
+ *fcs_ok =
+ (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCS_OK_MASK) >>
+ CQ_FCP_RQ_DESC_FCS_OK_SHIFT;
+}
+
+struct cq_sgl_desc {
+ u16 exchange_id;
+ u16 q_number;
+ u32 active_burst_offset;
+ u32 tot_data_bytes;
+ u16 tmpl;
+ u8 sgl_err;
+ u8 type_color;
+};
+
+enum cq_sgl_err_types {
+ CQ_SGL_ERR_NO_ERROR = 0,
+ CQ_SGL_ERR_OVERFLOW, /* data ran beyond end of SGL */
+ CQ_SGL_ERR_SGL_LCL_ADDR_ERR, /* sgl access to local vnic addr illegal*/
+ CQ_SGL_ERR_ADDR_RSP_ERR, /* sgl address error */
+ CQ_SGL_ERR_DATA_RSP_ERR, /* sgl data rsp error */
+ CQ_SGL_ERR_CNT_ZERO_ERR, /* SGL count is 0 */
+ CQ_SGL_ERR_CNT_MAX_ERR, /* SGL count is larger than supported */
+ CQ_SGL_ERR_ORDER_ERR, /* frames recv on both ports, order err */
+ CQ_SGL_ERR_DATA_LCL_ADDR_ERR,/* sgl data buf to local vnic addr ill */
+ CQ_SGL_ERR_HOST_CQ_ERR, /* host cq entry to local vnic addr ill */
+};
+
+#define CQ_SGL_SGL_ERR_MASK 0x1f
+#define CQ_SGL_TMPL_MASK 0x1f
+
+static inline void cq_sgl_desc_dec(struct cq_sgl_desc *desc_ptr,
+ u8 *type,
+ u8 *color,
+ u16 *q_number,
+ u16 *exchange_id,
+ u32 *active_burst_offset,
+ u32 *tot_data_bytes,
+ u16 *tmpl,
+ u8 *sgl_err)
+{
+ /* Cheat a little by assuming exchange_id is the same as completed
+ index */
+ cq_desc_dec((struct cq_desc *)desc_ptr, type, color, q_number,
+ exchange_id);
+ *active_burst_offset = desc_ptr->active_burst_offset;
+ *tot_data_bytes = desc_ptr->tot_data_bytes;
+ *tmpl = desc_ptr->tmpl & CQ_SGL_TMPL_MASK;
+ *sgl_err = desc_ptr->sgl_err & CQ_SGL_SGL_ERR_MASK;
+}
+
+#endif /* _CQ_EXCH_DESC_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FCPIO_H_
+#define _FCPIO_H_
+
+#include <linux/if_ether.h>
+
+/*
+ * This header file includes all of the data structures used for
+ * communication by the host driver to the fcp firmware.
+ */
+
+/*
+ * Exchange and sequence id space allocated to the host driver
+ */
+#define FCPIO_HOST_EXCH_RANGE_START 0x1000
+#define FCPIO_HOST_EXCH_RANGE_END 0x1fff
+#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80
+#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff
+
+/*
+ * Command entry type
+ */
+enum fcpio_type {
+ /*
+ * Initiator request types
+ */
+ FCPIO_ICMND_16 = 0x1,
+ FCPIO_ICMND_32,
+ FCPIO_ICMND_CMPL,
+ FCPIO_ITMF,
+ FCPIO_ITMF_CMPL,
+
+ /*
+ * Target request types
+ */
+ FCPIO_TCMND_16 = 0x11,
+ FCPIO_TCMND_32,
+ FCPIO_TDATA,
+ FCPIO_TXRDY,
+ FCPIO_TRSP,
+ FCPIO_TDRSP_CMPL,
+ FCPIO_TTMF,
+ FCPIO_TTMF_ACK,
+ FCPIO_TABORT,
+ FCPIO_TABORT_CMPL,
+
+ /*
+ * Misc request types
+ */
+ FCPIO_ACK = 0x20,
+ FCPIO_RESET,
+ FCPIO_RESET_CMPL,
+ FCPIO_FLOGI_REG,
+ FCPIO_FLOGI_REG_CMPL,
+ FCPIO_ECHO,
+ FCPIO_ECHO_CMPL,
+ FCPIO_LUNMAP_CHNG,
+ FCPIO_LUNMAP_REQ,
+ FCPIO_LUNMAP_REQ_CMPL,
+ FCPIO_FLOGI_FIP_REG,
+ FCPIO_FLOGI_FIP_REG_CMPL,
+};
+
+/*
+ * Header status codes from the firmware
+ */
+enum fcpio_status {
+ FCPIO_SUCCESS = 0, /* request was successful */
+
+ /*
+ * If a request to the firmware is rejected, the original request
+ * header will be returned with the status set to one of the following:
+ */
+ FCPIO_INVALID_HEADER, /* header contains invalid data */
+ FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */
+ FCPIO_INVALID_PARAM, /* some parameter in request is invalid */
+ FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
+ FCPIO_IO_NOT_FOUND, /* requested I/O was not found */
+
+ /*
+ * Once a request is processed, the firmware will usually return
+ * a cmpl message type. In cases where errors occurred,
+ * the header status field would be filled in with one of the following:
+ */
+ FCPIO_ABORTED = 0x41, /* request was aborted */
+ FCPIO_TIMEOUT, /* request was timed out */
+ FCPIO_SGL_INVALID, /* request was aborted due to sgl error */
+ FCPIO_MSS_INVALID, /* request was aborted due to mss error */
+ FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */
+ FCPIO_FW_ERR, /* request was terminated due to fw error */
+ FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */
+ FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */
+ FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
+ FCPIO_CMND_REJECTED, /* request was invalid and rejected */
+ FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */
+ FCPIO_PATH_FAILED, /* i/o sent to current path failed */
+ FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */
+};
+
+/*
+ * The header command tag. All host requests will use the "tag" field
+ * to mark commands with a unique tag. When the firmware responds to
+ * a host request, it will copy the tag field into the response.
+ *
+ * The only firmware requests that will use the rx_id/ox_id fields instead
+ * of the tag field will be the target command and target task management
+ * requests. These two requests do not have corresponding host requests
+ * since they come directly from the FC initiator on the network.
+ */
+struct fcpio_tag {
+ union {
+ u32 req_id;
+ struct {
+ u16 rx_id;
+ u16 ox_id;
+ } ex_id;
+ } u;
+};
+
+static inline void
+fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
+{
+ tag->u.req_id = id;
+}
+
+static inline void
+fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id)
+{
+ *id = tag->u.req_id;
+}
+
+static inline void
+fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
+{
+ tag->u.ex_id.rx_id = rx_id;
+ tag->u.ex_id.ox_id = ox_id;
+}
+
+static inline void
+fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id)
+{
+ *rx_id = tag->u.ex_id.rx_id;
+ *ox_id = tag->u.ex_id.ox_id;
+}
+
+/*
+ * The header for an fcpio request, whether from the firmware or from the
+ * host driver
+ */
+struct fcpio_header {
+ u8 type; /* enum fcpio_type */
+ u8 status; /* header status entry */
+ u16 _resvd; /* reserved */
+ struct fcpio_tag tag; /* header tag */
+};
+
+static inline void
+fcpio_header_enc(struct fcpio_header *hdr,
+ u8 type, u8 status,
+ struct fcpio_tag tag)
+{
+ hdr->type = type;
+ hdr->status = status;
+ hdr->_resvd = 0;
+ hdr->tag = tag;
+}
+
+static inline void
+fcpio_header_dec(struct fcpio_header *hdr,
+ u8 *type, u8 *status,
+ struct fcpio_tag *tag)
+{
+ *type = hdr->type;
+ *status = hdr->status;
+ *tag = hdr->tag;
+}
+
+#define CDB_16 16
+#define CDB_32 32
+#define LUN_ADDRESS 8
+
+/*
+ * fcpio_icmnd_16: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 16-byte command
+ */
+struct fcpio_icmnd_16 {
+ u32 lunmap_id; /* index into lunmap table */
+ u8 special_req_flags; /* special exchange request flags */
+ u8 _resvd0[3]; /* reserved */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 sense_len; /* sense buffer length */
+ u64 sgl_addr; /* scatter-gather list addr */
+ u64 sense_addr; /* sense buffer address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd1; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd2; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u16 mss; /* FC vNIC only: max burst */
+ u16 _resvd3; /* reserved */
+ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
+ u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */
+};
+
+/*
+ * Special request flags
+ */
+#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */
+#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */
+#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */
+#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_ICMND_RDDATA 0x02 /* read data */
+#define FCPIO_ICMND_WRDATA 0x01 /* write data */
+
+/*
+ * fcpio_icmnd_32: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 32-byte command
+ */
+struct fcpio_icmnd_32 {
+ u32 lunmap_id; /* index into lunmap table */
+ u8 special_req_flags; /* special exchange request flags */
+ u8 _resvd0[3]; /* reserved */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 sense_len; /* sense buffer length */
+ u64 sgl_addr; /* scatter-gather list addr */
+ u64 sense_addr; /* sense buffer address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd1; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd2; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u16 mss; /* FC vNIC only: max burst */
+ u16 _resvd3; /* reserved */
+ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
+ u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */
+};
+
+/*
+ * fcpio_itmf: host -> firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * The t_tag field is only needed when the request type is ABT_TASK.
+ */
+struct fcpio_itmf {
+ u32 lunmap_id; /* index into lunmap table */
+ u32 tm_req; /* SCSI Task Management request */
+ u32 t_tag; /* header tag of fcpio to be aborted */
+ u32 _resvd; /* _reserved */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd1; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */
+ u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */
+};
+
+/*
+ * Task Management request
+ */
+enum fcpio_itmf_tm_req_type {
+ FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */
+ FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */
+ FCPIO_ITMF_ABT_TASK_SET, /* abort task set */
+ FCPIO_ITMF_CLR_TASK_SET, /* clear task set */
+ FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */
+ FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */
+};
+
+/*
+ * fcpio_tdata: host -> firmware request
+ *
+ * used for requesting the firmware to send out a read data transfer for a
+ * target command
+ */
+struct fcpio_tdata {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 flags; /* command flags */
+ u32 rel_offset; /* data sequence relative offset */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 data_len; /* length of data expected to send */
+ u64 sgl_addr; /* scatter-gather list address */
+};
+
+/*
+ * Command flags
+ */
+#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */
+
+/*
+ * fcpio_txrdy: host -> firmware request
+ *
+ * used for requesting the firmware to send out a write data transfer for a
+ * target command
+ */
+struct fcpio_txrdy {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 rel_offset; /* data sequence relative offset */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 data_len; /* length of data expected to send */
+ u64 sgl_addr; /* scatter-gather list address */
+};
+
+/*
+ * fcpio_trsp: host -> firmware request
+ *
+ * used for requesting the firmware to send out a response for a target
+ * command
+ */
+struct fcpio_trsp {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 sense_len; /* sense data buffer length */
+ u64 sense_addr; /* sense data buffer address */
+ u16 _resvd1; /* reserved */
+ u8 flags; /* response request flags */
+ u8 scsi_status; /* SCSI status */
+ u32 residual; /* SCSI data residual value of I/O */
+};
+
+/*
+ * resposnse request flags
+ */
+#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */
+#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */
+
+/*
+ * fcpio_ttmf_ack: host -> firmware response
+ *
+ * used by the host to indicate to the firmware it has received and processed
+ * the target tmf request
+ */
+struct fcpio_ttmf_ack {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 tmf_status; /* SCSI task management status */
+};
+
+/*
+ * fcpio_tabort: host -> firmware request
+ *
+ * used by the host to request the firmware to abort a target request that was
+ * received by the firmware
+ */
+struct fcpio_tabort {
+ u16 rx_id; /* rx_id of the target request */
+};
+
+/*
+ * fcpio_reset: host -> firmware request
+ *
+ * used by the host to signal a reset of the driver to the firmware
+ * and to request firmware to clean up all outstanding I/O
+ */
+struct fcpio_reset {
+ u32 _resvd;
+};
+
+enum fcpio_flogi_reg_format_type {
+ FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */
+ FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */
+};
+
+/*
+ * fcpio_flogi_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_reg {
+ u8 format;
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */
+ u16 _resvd;
+ u32 r_a_tov; /* R_A_TOV in msec */
+ u32 e_d_tov; /* E_D_TOV in msec */
+};
+
+/*
+ * fcpio_echo: host -> firmware request
+ *
+ * sends a heartbeat echo request to the firmware
+ */
+struct fcpio_echo {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req: host -> firmware request
+ *
+ * scsi vnic only
+ * sends a request to retrieve the lunmap table for scsi vnics
+ */
+struct fcpio_lunmap_req {
+ u64 addr; /* address of the buffer */
+ u32 len; /* len of the buffer */
+};
+
+/*
+ * fcpio_flogi_fip_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_fip_reg {
+ u8 _resvd0;
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */
+ u16 _resvd1;
+ u32 r_a_tov; /* R_A_TOV in msec */
+ u32 e_d_tov; /* E_D_TOV in msec */
+ u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */
+ u16 _resvd2;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the host to the
+ * firmware. They are 128 bytes per structure.
+ */
+#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */
+
+struct fcpio_host_req {
+ struct fcpio_header hdr;
+
+ union {
+ /*
+ * Defines space needed for request
+ */
+ u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];
+
+ /*
+ * Initiator host requests
+ */
+ struct fcpio_icmnd_16 icmnd_16;
+ struct fcpio_icmnd_32 icmnd_32;
+ struct fcpio_itmf itmf;
+
+ /*
+ * Target host requests
+ */
+ struct fcpio_tdata tdata;
+ struct fcpio_txrdy txrdy;
+ struct fcpio_trsp trsp;
+ struct fcpio_ttmf_ack ttmf_ack;
+ struct fcpio_tabort tabort;
+
+ /*
+ * Misc requests
+ */
+ struct fcpio_reset reset;
+ struct fcpio_flogi_reg flogi_reg;
+ struct fcpio_echo echo;
+ struct fcpio_lunmap_req lunmap_req;
+ struct fcpio_flogi_fip_reg flogi_fip_reg;
+ } u;
+};
+
+/*
+ * fcpio_icmnd_cmpl: firmware -> host response
+ *
+ * used for sending the host a response to an initiator command
+ */
+struct fcpio_icmnd_cmpl {
+ u8 _resvd0[6]; /* reserved */
+ u8 flags; /* response flags */
+ u8 scsi_status; /* SCSI status */
+ u32 residual; /* SCSI data residual length */
+ u32 sense_len; /* SCSI sense length */
+};
+
+/*
+ * response flags
+ */
+#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */
+#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */
+
+/*
+ * fcpio_itmf_cmpl: firmware -> host response
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct fcpio_itmf_cmpl {
+ u32 _resvd; /* reserved */
+};
+
+/*
+ * fcpio_tcmnd_16: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 16-Byte
+ * request
+ */
+struct fcpio_tcmnd_16 {
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd2; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 _resvd1; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */
+#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */
+#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */
+#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_TCMND_RDDATA 0x02 /* read data */
+#define FCPIO_TCMND_WRDATA 0x01 /* write data */
+
+/*
+ * fcpio_tcmnd_32: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 32-Byte
+ * request
+ */
+struct fcpio_tcmnd_32 {
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd2; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 _resvd0; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * fcpio_tdrsp_cmpl: firmware -> host response
+ *
+ * used by the firmware to notify the host of a response to a host target
+ * command
+ */
+struct fcpio_tdrsp_cmpl {
+ u16 rx_id; /* rx_id of the target request */
+ u16 _resvd0; /* reserved */
+};
+
+/*
+ * fcpio_ttmf: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming task management
+ * function request
+ */
+struct fcpio_ttmf {
+ u8 _resvd0; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 _resvd2[3]; /* reserved */
+ u32 tmf_type; /* task management request type */
+};
+
+/*
+ * Task Management request
+ */
+#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */
+#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */
+#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */
+#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */
+#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */
+
+/*
+ * fcpio_tabort_cmpl: firmware -> host response
+ *
+ * used by the firmware to respond to a host's tabort request
+ */
+struct fcpio_tabort_cmpl {
+ u16 rx_id; /* rx_id of the target request */
+ u16 _resvd0; /* reserved */
+};
+
+/*
+ * fcpio_ack: firmware -> host response
+ *
+ * used by firmware to notify the host of the last work request received
+ */
+struct fcpio_ack {
+ u16 request_out; /* last host entry received */
+ u16 _resvd;
+};
+
+/*
+ * fcpio_reset_cmpl: firmware -> host response
+ *
+ * use by firmware to respond to the host's reset request
+ */
+struct fcpio_reset_cmpl {
+ u16 vnic_id;
+};
+
+/*
+ * fcpio_flogi_reg_cmpl: firmware -> host response
+ *
+ * fc vnic only
+ * response to the fcpio_flogi_reg request
+ */
+struct fcpio_flogi_reg_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_echo_cmpl: firmware -> host response
+ *
+ * response to the fcpio_echo request
+ */
+struct fcpio_echo_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_chng: firmware -> host notification
+ *
+ * scsi vnic only
+ * notifies the host that the lunmap tables have changed
+ */
+struct fcpio_lunmap_chng {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req_cmpl: firmware -> host response
+ *
+ * scsi vnic only
+ * response for lunmap table request from the host
+ */
+struct fcpio_lunmap_req_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the firmware to
+ * the host. They are 64 bytes per structure.
+ */
+#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */
+struct fcpio_fw_req {
+ struct fcpio_header hdr;
+
+ union {
+ /*
+ * Defines space needed for request
+ */
+ u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];
+
+ /*
+ * Initiator firmware responses
+ */
+ struct fcpio_icmnd_cmpl icmnd_cmpl;
+ struct fcpio_itmf_cmpl itmf_cmpl;
+
+ /*
+ * Target firmware new requests
+ */
+ struct fcpio_tcmnd_16 tcmnd_16;
+ struct fcpio_tcmnd_32 tcmnd_32;
+
+ /*
+ * Target firmware responses
+ */
+ struct fcpio_tdrsp_cmpl tdrsp_cmpl;
+ struct fcpio_ttmf ttmf;
+ struct fcpio_tabort_cmpl tabort_cmpl;
+
+ /*
+ * Firmware response to work received
+ */
+ struct fcpio_ack ack;
+
+ /*
+ * Misc requests
+ */
+ struct fcpio_reset_cmpl reset_cmpl;
+ struct fcpio_flogi_reg_cmpl flogi_reg_cmpl;
+ struct fcpio_echo_cmpl echo_cmpl;
+ struct fcpio_lunmap_chng lunmap_chng;
+ struct fcpio_lunmap_req_cmpl lunmap_req_cmpl;
+ } u;
+};
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the MSB of the structure
+ */
+static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
+{
+ u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+ if (color)
+ *c |= 0x80;
+ else
+ *c &= ~0x80;
+}
+
+static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color)
+{
+ u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+ *color = *c >> 7;
+
+ /*
+ * Make sure color bit is read from desc *before* other fields
+ * are read from desc. Hardware guarantees color bit is last
+ * bit (byte) written. Adding the rmb() prevents the compiler
+ * and/or CPU from reordering the reads which would potentially
+ * result in reading stale values.
+ */
+
+ rmb();
+
+}
+
+/*
+ * Lunmap table entry for scsi vnics
+ */
+#define FCPIO_LUNMAP_TABLE_SIZE 256
+#define FCPIO_FLAGS_LUNMAP_VALID 0x80
+#define FCPIO_FLAGS_BOOT 0x01
+struct fcpio_lunmap_entry {
+ u8 bus;
+ u8 target;
+ u8 lun;
+ u8 path_cnt;
+ u16 flags;
+ u16 update_cnt;
+};
+
+struct fcpio_lunmap_tbl {
+ u32 update_cnt;
+ struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
+};
+
+#endif /* _FCPIO_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_H_
+#define _FNIC_H_
+
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/workqueue.h>
+#include <scsi/libfc.h>
+#include "fnic_io.h"
+#include "fnic_res.h"
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_wq_copy.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "vnic_scsi.h"
+
+#define DRV_NAME "fnic"
+#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
+#define DRV_VERSION "1.0.0.1121"
+#define PFX DRV_NAME ": "
+#define DFX DRV_NAME "%d: "
+
+#define DESC_CLEAN_LOW_WATERMARK 8
+#define FNIC_MAX_IO_REQ 2048 /* scsi_cmnd tag map entries */
+#define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */
+#define FNIC_DFLT_QUEUE_DEPTH 32
+#define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */
+
+/*
+ * Tag bits used for special requests.
+ */
+#define BIT(nr) (1UL << (nr))
+#define FNIC_TAG_ABORT BIT(30) /* tag bit indicating abort */
+#define FNIC_TAG_DEV_RST BIT(29) /* indicates device reset */
+#define FNIC_TAG_MASK (BIT(24) - 1) /* mask for lookup */
+#define FNIC_NO_TAG -1
+
+/*
+ * Usage of the scsi_cmnd scratchpad.
+ * These fields are locked by the hashed io_req_lock.
+ */
+#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
+#define CMD_STATE(Cmnd) ((Cmnd)->SCp.phase)
+#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message)
+#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
+#define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command)
+
+#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */
+
+#define FNIC_LUN_RESET_TIMEOUT 10000 /* mSec */
+#define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */
+#define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */
+#define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */
+
+#define FNIC_MAX_FCP_TARGET 256
+
+extern unsigned int fnic_log_level;
+
+#define FNIC_MAIN_LOGGING 0x01
+#define FNIC_FCS_LOGGING 0x02
+#define FNIC_SCSI_LOGGING 0x04
+#define FNIC_ISR_LOGGING 0x08
+
+#define FNIC_CHECK_LOGGING(LEVEL, CMD) \
+do { \
+ if (unlikely(fnic_log_level & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
+} while (0)
+
+#define FNIC_MAIN_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_MAIN_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_FCS_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_FCS_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_SCSI_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_SCSI_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_ISR_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_ISR_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+extern const char *fnic_state_str[];
+
+enum fnic_intx_intr_index {
+ FNIC_INTX_WQ_RQ_COPYWQ,
+ FNIC_INTX_ERR,
+ FNIC_INTX_NOTIFY,
+ FNIC_INTX_INTR_MAX,
+};
+
+enum fnic_msix_intr_index {
+ FNIC_MSIX_RQ,
+ FNIC_MSIX_WQ,
+ FNIC_MSIX_WQ_COPY,
+ FNIC_MSIX_ERR_NOTIFY,
+ FNIC_MSIX_INTR_MAX,
+};
+
+struct fnic_msix_entry {
+ int requested;
+ char devname[IFNAMSIZ];
+ irqreturn_t (*isr)(int, void *);
+ void *devid;
+};
+
+enum fnic_state {
+ FNIC_IN_FC_MODE = 0,
+ FNIC_IN_FC_TRANS_ETH_MODE,
+ FNIC_IN_ETH_MODE,
+ FNIC_IN_ETH_TRANS_FC_MODE,
+};
+
+#define FNIC_WQ_COPY_MAX 1
+#define FNIC_WQ_MAX 1
+#define FNIC_RQ_MAX 1
+#define FNIC_CQ_MAX (FNIC_WQ_COPY_MAX + FNIC_WQ_MAX + FNIC_RQ_MAX)
+
+struct mempool;
+
+/* Per-instance private data structure */
+struct fnic {
+ struct fc_lport *lport;
+ struct vnic_dev_bar bar0;
+
+ struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX];
+ struct fnic_msix_entry msix[FNIC_MSIX_INTR_MAX];
+
+ struct vnic_stats *stats;
+ unsigned long stats_time; /* time of stats update */
+ struct vnic_nic_cfg *nic_cfg;
+ char name[IFNAMSIZ];
+ struct timer_list notify_timer; /* used for MSI interrupts */
+
+ unsigned int err_intr_offset;
+ unsigned int link_intr_offset;
+
+ unsigned int wq_count;
+ unsigned int cq_count;
+
+ u32 fcoui_mode:1; /* use fcoui address*/
+ u32 vlan_hw_insert:1; /* let hw insert the tag */
+ u32 in_remove:1; /* fnic device in removal */
+ u32 stop_rx_link_events:1; /* stop proc. rx frames, link events */
+
+ struct completion *remove_wait; /* device remove thread blocks */
+
+ struct fc_frame *flogi;
+ struct fc_frame *flogi_resp;
+ u16 flogi_oxid;
+ unsigned long s_id;
+ enum fnic_state state;
+ spinlock_t fnic_lock;
+
+ u16 vlan_id; /* VLAN tag including priority */
+ u8 mac_addr[ETH_ALEN];
+ u8 dest_addr[ETH_ALEN];
+ u8 data_src_addr[ETH_ALEN];
+ u64 fcp_input_bytes; /* internal statistic */
+ u64 fcp_output_bytes; /* internal statistic */
+ u32 link_down_cnt;
+ int link_status;
+
+ struct list_head list;
+ struct pci_dev *pdev;
+ struct vnic_fc_config config;
+ struct vnic_dev *vdev;
+ unsigned int raw_wq_count;
+ unsigned int wq_copy_count;
+ unsigned int rq_count;
+ int fw_ack_index[FNIC_WQ_COPY_MAX];
+ unsigned short fw_ack_recd[FNIC_WQ_COPY_MAX];
+ unsigned short wq_copy_desc_low[FNIC_WQ_COPY_MAX];
+ unsigned int intr_count;
+ u32 __iomem *legacy_pba;
+ struct fnic_host_tag *tags;
+ mempool_t *io_req_pool;
+ mempool_t *io_sgl_pool[FNIC_SGL_NUM_CACHES];
+ spinlock_t io_req_lock[FNIC_IO_LOCKS]; /* locks for scsi cmnds */
+
+ struct work_struct link_work;
+ struct work_struct frame_work;
+ struct sk_buff_head frame_queue;
+
+ /* copy work queue cache line section */
+ ____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX];
+ /* completion queue cache line section */
+ ____cacheline_aligned struct vnic_cq cq[FNIC_CQ_MAX];
+
+ spinlock_t wq_copy_lock[FNIC_WQ_COPY_MAX];
+
+ /* work queue cache line section */
+ ____cacheline_aligned struct vnic_wq wq[FNIC_WQ_MAX];
+ spinlock_t wq_lock[FNIC_WQ_MAX];
+
+ /* receive queue cache line section */
+ ____cacheline_aligned struct vnic_rq rq[FNIC_RQ_MAX];
+
+ /* interrupt resource cache line section */
+ ____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX];
+};
+
+extern struct workqueue_struct *fnic_event_queue;
+extern struct device_attribute *fnic_attrs[];
+
+void fnic_clear_intr_mode(struct fnic *fnic);
+int fnic_set_intr_mode(struct fnic *fnic);
+void fnic_free_intr(struct fnic *fnic);
+int fnic_request_intr(struct fnic *fnic);
+
+int fnic_send(struct fc_lport *, struct fc_frame *);
+void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf);
+void fnic_handle_frame(struct work_struct *work);
+void fnic_handle_link(struct work_struct *work);
+int fnic_rq_cmpl_handler(struct fnic *fnic, int);
+int fnic_alloc_rq_frame(struct vnic_rq *rq);
+void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf);
+int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp);
+
+int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+int fnic_abort_cmd(struct scsi_cmnd *);
+int fnic_device_reset(struct scsi_cmnd *);
+int fnic_host_reset(struct scsi_cmnd *);
+int fnic_reset(struct Scsi_Host *);
+void fnic_scsi_cleanup(struct fc_lport *);
+void fnic_scsi_abort_io(struct fc_lport *);
+void fnic_empty_scsi_cleanup(struct fc_lport *);
+void fnic_exch_mgr_reset(struct fc_lport *, u32, u32);
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int);
+int fnic_wq_cmpl_handler(struct fnic *fnic, int);
+int fnic_flogi_reg_handler(struct fnic *fnic);
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *desc);
+int fnic_fw_reset_handler(struct fnic *fnic);
+void fnic_terminate_rport_io(struct fc_rport *);
+const char *fnic_state_to_str(unsigned int state);
+
+void fnic_log_q_error(struct fnic *fnic);
+void fnic_handle_link_event(struct fnic *fnic);
+
+#endif /* _FNIC_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/string.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include "fnic.h"
+
+static ssize_t fnic_show_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fc_lport *lp = shost_priv(class_to_shost(dev));
+ struct fnic *fnic = lport_priv(lp);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", fnic_state_str[fnic->state]);
+}
+
+static ssize_t fnic_show_drv_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", DRV_VERSION);
+}
+
+static ssize_t fnic_show_link_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fc_lport *lp = shost_priv(class_to_shost(dev));
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", (lp->link_up)
+ ? "Link Up" : "Link Down");
+}
+
+static DEVICE_ATTR(fnic_state, S_IRUGO, fnic_show_state, NULL);
+static DEVICE_ATTR(drv_version, S_IRUGO, fnic_show_drv_version, NULL);
+static DEVICE_ATTR(link_state, S_IRUGO, fnic_show_link_state, NULL);
+
+struct device_attribute *fnic_attrs[] = {
+ &dev_attr_fnic_state,
+ &dev_attr_drv_version,
+ &dev_attr_link_state,
+ NULL,
+};
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/fc_frame.h>
+#include <scsi/libfc.h>
+#include "fnic_io.h"
+#include "fnic.h"
+#include "cq_enet_desc.h"
+#include "cq_exch_desc.h"
+
+struct workqueue_struct *fnic_event_queue;
+
+void fnic_handle_link(struct work_struct *work)
+{
+ struct fnic *fnic = container_of(work, struct fnic, link_work);
+ unsigned long flags;
+ int old_link_status;
+ u32 old_link_down_cnt;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
+ }
+
+ old_link_down_cnt = fnic->link_down_cnt;
+ old_link_status = fnic->link_status;
+ fnic->link_status = vnic_dev_link_status(fnic->vdev);
+ fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev);
+
+ if (old_link_status == fnic->link_status) {
+ if (!fnic->link_status)
+ /* DOWN -> DOWN */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ else {
+ if (old_link_down_cnt != fnic->link_down_cnt) {
+ /* UP -> DOWN -> UP */
+ fnic->lport->host_stats.link_failure_count++;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "link down\n");
+ fc_linkdown(fnic->lport);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "link up\n");
+ fc_linkup(fnic->lport);
+ } else
+ /* UP -> UP */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ }
+ } else if (fnic->link_status) {
+ /* DOWN -> UP */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n");
+ fc_linkup(fnic->lport);
+ } else {
+ /* UP -> DOWN */
+ fnic->lport->host_stats.link_failure_count++;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n");
+ fc_linkdown(fnic->lport);
+ }
+
+}
+
+/*
+ * This function passes incoming fabric frames to libFC
+ */
+void fnic_handle_frame(struct work_struct *work)
+{
+ struct fnic *fnic = container_of(work, struct fnic, frame_work);
+ struct fc_lport *lp = fnic->lport;
+ unsigned long flags;
+ struct sk_buff *skb;
+ struct fc_frame *fp;
+
+ while ((skb = skb_dequeue(&fnic->frame_queue))) {
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb(skb);
+ return;
+ }
+ fp = (struct fc_frame *)skb;
+ /* if Flogi resp frame, register the address */
+ if (fr_flags(fp)) {
+ vnic_dev_add_addr(fnic->vdev,
+ fnic->data_src_addr);
+ fr_flags(fp) = 0;
+ }
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ fc_exch_recv(lp, lp->emp, fp);
+ }
+
+}
+
+static inline void fnic_import_rq_fc_frame(struct sk_buff *skb,
+ u32 len, u8 sof, u8 eof)
+{
+ struct fc_frame *fp = (struct fc_frame *)skb;
+
+ skb_trim(skb, len);
+ fr_eof(fp) = eof;
+ fr_sof(fp) = sof;
+}
+
+
+static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len)
+{
+ struct fc_frame *fp;
+ struct ethhdr *eh;
+ struct vlan_ethhdr *vh;
+ struct fcoe_hdr *fcoe_hdr;
+ struct fcoe_crc_eof *ft;
+ u32 transport_len = 0;
+
+ eh = (struct ethhdr *)skb->data;
+ vh = (struct vlan_ethhdr *)skb->data;
+ if (vh->h_vlan_proto == htons(ETH_P_8021Q) &&
+ vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) {
+ skb_pull(skb, sizeof(struct vlan_ethhdr));
+ transport_len += sizeof(struct vlan_ethhdr);
+ } else if (eh->h_proto == htons(ETH_P_FCOE)) {
+ transport_len += sizeof(struct ethhdr);
+ skb_pull(skb, sizeof(struct ethhdr));
+ } else
+ return -1;
+
+ fcoe_hdr = (struct fcoe_hdr *)skb->data;
+ if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER)
+ return -1;
+
+ fp = (struct fc_frame *)skb;
+ fc_frame_init(fp);
+ fr_sof(fp) = fcoe_hdr->fcoe_sof;
+ skb_pull(skb, sizeof(struct fcoe_hdr));
+ transport_len += sizeof(struct fcoe_hdr);
+
+ ft = (struct fcoe_crc_eof *)(skb->data + len -
+ transport_len - sizeof(*ft));
+ fr_eof(fp) = ft->fcoe_eof;
+ skb_trim(skb, len - transport_len - sizeof(*ft));
+ return 0;
+}
+
+static inline int fnic_handle_flogi_resp(struct fnic *fnic,
+ struct fc_frame *fp)
+{
+ u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC;
+ struct ethhdr *eth_hdr;
+ struct fc_frame_header *fh;
+ int ret = 0;
+ unsigned long flags;
+ struct fc_frame *old_flogi_resp = NULL;
+
+ fh = (struct fc_frame_header *)fr_hdr(fp);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ if (fnic->state == FNIC_IN_ETH_MODE) {
+
+ /*
+ * Check if oxid matches on taking the lock. A new Flogi
+ * issued by libFC might have changed the fnic cached oxid
+ */
+ if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "Flogi response oxid not"
+ " matching cached oxid, dropping frame"
+ "\n");
+ ret = -1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb_irq(fp_skb(fp));
+ goto handle_flogi_resp_end;
+ }
+
+ /* Drop older cached flogi response frame, cache this frame */
+ old_flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = fp;
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+
+ /*
+ * this frame is part of flogi get the src mac addr from this
+ * frame if the src mac is fcoui based then we mark the
+ * address mode flag to use fcoui base for dst mac addr
+ * otherwise we have to store the fcoe gateway addr
+ */
+ eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp));
+ memcpy(mac, eth_hdr->h_source, ETH_ALEN);
+
+ if (ntoh24(mac) == FC_FCOE_OUI)
+ fnic->fcoui_mode = 1;
+ else {
+ fnic->fcoui_mode = 0;
+ memcpy(fnic->dest_addr, mac, ETH_ALEN);
+ }
+
+ /*
+ * Except for Flogi frame, all outbound frames from us have the
+ * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses
+ * the vnic MAC address as the Eth Src address
+ */
+ fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id);
+
+ /* We get our s_id from the d_id of the flogi resp frame */
+ fnic->s_id = ntoh24(fh->fh_d_id);
+
+ /* Change state to reflect transition from Eth to FC mode */
+ fnic->state = FNIC_IN_ETH_TRANS_FC_MODE;
+
+ } else {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "Unexpected fnic state %s while"
+ " processing flogi resp\n",
+ fnic_state_to_str(fnic->state));
+ ret = -1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb_irq(fp_skb(fp));
+ goto handle_flogi_resp_end;
+ }
+
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ /* Drop older cached frame */
+ if (old_flogi_resp)
+ dev_kfree_skb_irq(fp_skb(old_flogi_resp));
+
+ /*
+ * send flogi reg request to firmware, this will put the fnic in
+ * in FC mode
+ */
+ ret = fnic_flogi_reg_handler(fnic);
+
+ if (ret < 0) {
+ int free_fp = 1;
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ /*
+ * free the frame is some other thread is not
+ * pointing to it
+ */
+ if (fnic->flogi_resp != fp)
+ free_fp = 0;
+ else
+ fnic->flogi_resp = NULL;
+
+ if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE)
+ fnic->state = FNIC_IN_ETH_MODE;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (free_fp)
+ dev_kfree_skb_irq(fp_skb(fp));
+ }
+
+ handle_flogi_resp_end:
+ return ret;
+}
+
+/* Returns 1 for a response that matches cached flogi oxid */
+static inline int is_matching_flogi_resp_frame(struct fnic *fnic,
+ struct fc_frame *fp)
+{
+ struct fc_frame_header *fh;
+ int ret = 0;
+ u32 f_ctl;
+
+ fh = fc_frame_header_get(fp);
+ f_ctl = ntoh24(fh->fh_f_ctl);
+
+ if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) &&
+ fh->fh_r_ctl == FC_RCTL_ELS_REP &&
+ (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX &&
+ fh->fh_type == FC_TYPE_ELS)
+ ret = 1;
+
+ return ret;
+}
+
+static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc
+ *cq_desc, struct vnic_rq_buf *buf,
+ int skipped __attribute__((unused)),
+ void *opaque)
+{
+ struct fnic *fnic = vnic_dev_priv(rq->vdev);
+ struct sk_buff *skb;
+ struct fc_frame *fp;
+ unsigned int eth_hdrs_stripped;
+ u8 type, color, eop, sop, ingress_port, vlan_stripped;
+ u8 fcoe = 0, fcoe_sof, fcoe_eof;
+ u8 fcoe_fc_crc_ok = 1, fcoe_enc_error = 0;
+ u8 tcp_udp_csum_ok, udp, tcp, ipv4_csum_ok;
+ u8 ipv6, ipv4, ipv4_fragment, rss_type, csum_not_calc;
+ u8 fcs_ok = 1, packet_error = 0;
+ u16 q_number, completed_index, bytes_written = 0, vlan, checksum;
+ u32 rss_hash;
+ u16 exchange_id, tmpl;
+ u8 sof = 0;
+ u8 eof = 0;
+ u32 fcp_bytes_written = 0;
+ unsigned long flags;
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
+ PCI_DMA_FROMDEVICE);
+ skb = buf->os_buf;
+ buf->os_buf = NULL;
+
+ cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index);
+ if (type == CQ_DESC_TYPE_RQ_FCP) {
+ cq_fcp_rq_desc_dec((struct cq_fcp_rq_desc *)cq_desc,
+ &type, &color, &q_number, &completed_index,
+ &eop, &sop, &fcoe_fc_crc_ok, &exchange_id,
+ &tmpl, &fcp_bytes_written, &sof, &eof,
+ &ingress_port, &packet_error,
+ &fcoe_enc_error, &fcs_ok, &vlan_stripped,
+ &vlan);
+ eth_hdrs_stripped = 1;
+
+ } else if (type == CQ_DESC_TYPE_RQ_ENET) {
+ cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc,
+ &type, &color, &q_number, &completed_index,
+ &ingress_port, &fcoe, &eop, &sop,
+ &rss_type, &csum_not_calc, &rss_hash,
+ &bytes_written, &packet_error,
+ &vlan_stripped, &vlan, &checksum,
+ &fcoe_sof, &fcoe_fc_crc_ok,
+ &fcoe_enc_error, &fcoe_eof,
+ &tcp_udp_csum_ok, &udp, &tcp,
+ &ipv4_csum_ok, &ipv6, &ipv4,
+ &ipv4_fragment, &fcs_ok);
+ eth_hdrs_stripped = 0;
+
+ } else {
+ /* wrong CQ type*/
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic rq_cmpl wrong cq type x%x\n", type);
+ goto drop;
+ }
+
+ if (!fcs_ok || packet_error || !fcoe_fc_crc_ok || fcoe_enc_error) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic rq_cmpl fcoe x%x fcsok x%x"
+ " pkterr x%x fcoe_fc_crc_ok x%x, fcoe_enc_err"
+ " x%x\n",
+ fcoe, fcs_ok, packet_error,
+ fcoe_fc_crc_ok, fcoe_enc_error);
+ goto drop;
+ }
+
+ if (eth_hdrs_stripped)
+ fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof);
+ else if (fnic_import_rq_eth_pkt(skb, bytes_written))
+ goto drop;
+
+ fp = (struct fc_frame *)skb;
+
+ /*
+ * If frame is an ELS response that matches the cached FLOGI OX_ID,
+ * and is accept, issue flogi_reg_request copy wq request to firmware
+ * to register the S_ID and determine whether FC_OUI mode or GW mode.
+ */
+ if (is_matching_flogi_resp_frame(fnic, fp)) {
+ if (!eth_hdrs_stripped) {
+ if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
+ fnic_handle_flogi_resp(fnic, fp);
+ return;
+ }
+ /*
+ * Recd. Flogi reject. No point registering
+ * with fw, but forward to libFC
+ */
+ goto forward;
+ }
+ goto drop;
+ }
+ if (!eth_hdrs_stripped)
+ goto drop;
+
+forward:
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ goto drop;
+ }
+ /* Use fr_flags to indicate whether succ. flogi resp or not */
+ fr_flags(fp) = 0;
+ fr_dev(fp) = fnic->lport;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ skb_queue_tail(&fnic->frame_queue, skb);
+ queue_work(fnic_event_queue, &fnic->frame_work);
+
+ return;
+drop:
+ dev_kfree_skb_irq(skb);
+}
+
+static int fnic_rq_cmpl_handler_cont(struct vnic_dev *vdev,
+ struct cq_desc *cq_desc, u8 type,
+ u16 q_number, u16 completed_index,
+ void *opaque)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+
+ vnic_rq_service(&fnic->rq[q_number], cq_desc, completed_index,
+ VNIC_RQ_RETURN_DESC, fnic_rq_cmpl_frame_recv,
+ NULL);
+ return 0;
+}
+
+int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do)
+{
+ unsigned int tot_rq_work_done = 0, cur_work_done;
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ cur_work_done = vnic_cq_service(&fnic->cq[i], rq_work_to_do,
+ fnic_rq_cmpl_handler_cont,
+ NULL);
+ if (cur_work_done) {
+ err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
+ if (err)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic_alloc_rq_frame cant alloc"
+ " frame\n");
+ }
+ tot_rq_work_done += cur_work_done;
+ }
+
+ return tot_rq_work_done;
+}
+
+/*
+ * This function is called once at init time to allocate and fill RQ
+ * buffers. Subsequently, it is called in the interrupt context after RQ
+ * buffer processing to replenish the buffers in the RQ
+ */
+int fnic_alloc_rq_frame(struct vnic_rq *rq)
+{
+ struct fnic *fnic = vnic_dev_priv(rq->vdev);
+ struct sk_buff *skb;
+ u16 len;
+ dma_addr_t pa;
+
+ len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM;
+ skb = dev_alloc_skb(len);
+ if (!skb) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "Unable to allocate RQ sk_buff\n");
+ return -ENOMEM;
+ }
+ skb_reset_mac_header(skb);
+ skb_reset_transport_header(skb);
+ skb_reset_network_header(skb);
+ skb_put(skb, len);
+ pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE);
+ fnic_queue_rq_desc(rq, skb, pa, len);
+ return 0;
+}
+
+void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf)
+{
+ struct fc_frame *fp = buf->os_buf;
+ struct fnic *fnic = vnic_dev_priv(rq->vdev);
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
+ PCI_DMA_FROMDEVICE);
+
+ dev_kfree_skb(fp_skb(fp));
+ buf->os_buf = NULL;
+}
+
+static inline int is_flogi_frame(struct fc_frame_header *fh)
+{
+ return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI;
+}
+
+int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
+{
+ struct vnic_wq *wq = &fnic->wq[0];
+ struct sk_buff *skb;
+ dma_addr_t pa;
+ struct ethhdr *eth_hdr;
+ struct vlan_ethhdr *vlan_hdr;
+ struct fcoe_hdr *fcoe_hdr;
+ struct fc_frame_header *fh;
+ u32 tot_len, eth_hdr_len;
+ int ret = 0;
+ unsigned long flags;
+
+ fh = fc_frame_header_get(fp);
+ skb = fp_skb(fp);
+
+ if (!fnic->vlan_hw_insert) {
+ eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr);
+ vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len);
+ eth_hdr = (struct ethhdr *)vlan_hdr;
+ vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
+ vlan_hdr->h_vlan_encapsulated_proto = htons(ETH_P_FCOE);
+ vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id);
+ fcoe_hdr = (struct fcoe_hdr *)(vlan_hdr + 1);
+ } else {
+ eth_hdr_len = sizeof(*eth_hdr) + sizeof(*fcoe_hdr);
+ eth_hdr = (struct ethhdr *)skb_push(skb, eth_hdr_len);
+ eth_hdr->h_proto = htons(ETH_P_FCOE);
+ fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1);
+ }
+
+ if (is_flogi_frame(fh)) {
+ fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
+ memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN);
+ } else {
+ if (fnic->fcoui_mode)
+ fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
+ else
+ memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN);
+ memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN);
+ }
+
+ tot_len = skb->len;
+ BUG_ON(tot_len % 4);
+
+ memset(fcoe_hdr, 0, sizeof(*fcoe_hdr));
+ fcoe_hdr->fcoe_sof = fr_sof(fp);
+ if (FC_FCOE_VER)
+ FC_FCOE_ENCAPS_VER(fcoe_hdr, FC_FCOE_VER);
+
+ pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE);
+
+ spin_lock_irqsave(&fnic->wq_lock[0], flags);
+
+ if (!vnic_wq_desc_avail(wq)) {
+ pci_unmap_single(fnic->pdev, pa,
+ tot_len, PCI_DMA_TODEVICE);
+ ret = -1;
+ goto fnic_send_frame_end;
+ }
+
+ fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp),
+ fnic->vlan_hw_insert, fnic->vlan_id, 1, 1, 1);
+fnic_send_frame_end:
+ spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
+
+ if (ret)
+ dev_kfree_skb_any(fp_skb(fp));
+
+ return ret;
+}
+
+/*
+ * fnic_send
+ * Routine to send a raw frame
+ */
+int fnic_send(struct fc_lport *lp, struct fc_frame *fp)
+{
+ struct fnic *fnic = lport_priv(lp);
+ struct fc_frame_header *fh;
+ int ret = 0;
+ enum fnic_state old_state;
+ unsigned long flags;
+ struct fc_frame *old_flogi = NULL;
+ struct fc_frame *old_flogi_resp = NULL;
+
+ if (fnic->in_remove) {
+ dev_kfree_skb(fp_skb(fp));
+ ret = -1;
+ goto fnic_send_end;
+ }
+
+ fh = fc_frame_header_get(fp);
+ /* if not an Flogi frame, send it out, this is the common case */
+ if (!is_flogi_frame(fh))
+ return fnic_send_frame(fnic, fp);
+
+ /* Flogi frame, now enter the state machine */
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+again:
+ /* Get any old cached frames, free them after dropping lock */
+ old_flogi = fnic->flogi;
+ fnic->flogi = NULL;
+ old_flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+
+ old_state = fnic->state;
+ switch (old_state) {
+ case FNIC_IN_FC_MODE:
+ case FNIC_IN_ETH_TRANS_FC_MODE:
+ default:
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (old_flogi) {
+ dev_kfree_skb(fp_skb(old_flogi));
+ old_flogi = NULL;
+ }
+ if (old_flogi_resp) {
+ dev_kfree_skb(fp_skb(old_flogi_resp));
+ old_flogi_resp = NULL;
+ }
+
+ ret = fnic_fw_reset_handler(fnic);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE)
+ goto again;
+ if (ret) {
+ fnic->state = old_state;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb(fp_skb(fp));
+ goto fnic_send_end;
+ }
+ old_flogi = fnic->flogi;
+ fnic->flogi = fp;
+ fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+ old_flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ break;
+
+ case FNIC_IN_FC_TRANS_ETH_MODE:
+ /*
+ * A reset is pending with the firmware. Store the flogi
+ * and its oxid. The transition out of this state happens
+ * only when Firmware completes the reset, either with
+ * success or failed. If success, transition to
+ * FNIC_IN_ETH_MODE, if fail, then transition to
+ * FNIC_IN_FC_MODE
+ */
+ fnic->flogi = fp;
+ fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ break;
+
+ case FNIC_IN_ETH_MODE:
+ /*
+ * The fw/hw is already in eth mode. Store the oxid,
+ * and send the flogi frame out. The transition out of this
+ * state happens only we receive flogi response from the
+ * network, and the oxid matches the cached oxid when the
+ * flogi frame was sent out. If they match, then we issue
+ * a flogi_reg request and transition to state
+ * FNIC_IN_ETH_TRANS_FC_MODE
+ */
+ fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ ret = fnic_send_frame(fnic, fp);
+ break;
+ }
+
+fnic_send_end:
+ if (old_flogi)
+ dev_kfree_skb(fp_skb(old_flogi));
+ if (old_flogi_resp)
+ dev_kfree_skb(fp_skb(old_flogi_resp));
+ return ret;
+}
+
+static void fnic_wq_complete_frame_send(struct vnic_wq *wq,
+ struct cq_desc *cq_desc,
+ struct vnic_wq_buf *buf, void *opaque)
+{
+ struct sk_buff *skb = buf->os_buf;
+ struct fc_frame *fp = (struct fc_frame *)skb;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr,
+ buf->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(fp_skb(fp));
+ buf->os_buf = NULL;
+}
+
+static int fnic_wq_cmpl_handler_cont(struct vnic_dev *vdev,
+ struct cq_desc *cq_desc, u8 type,
+ u16 q_number, u16 completed_index,
+ void *opaque)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_lock[q_number], flags);
+ vnic_wq_service(&fnic->wq[q_number], cq_desc, completed_index,
+ fnic_wq_complete_frame_send, NULL);
+ spin_unlock_irqrestore(&fnic->wq_lock[q_number], flags);
+
+ return 0;
+}
+
+int fnic_wq_cmpl_handler(struct fnic *fnic, int work_to_do)
+{
+ unsigned int wq_work_done = 0;
+ unsigned int i;
+
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ wq_work_done += vnic_cq_service(&fnic->cq[fnic->rq_count+i],
+ work_to_do,
+ fnic_wq_cmpl_handler_cont,
+ NULL);
+ }
+
+ return wq_work_done;
+}
+
+
+void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf)
+{
+ struct fc_frame *fp = buf->os_buf;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr,
+ buf->len, PCI_DMA_TODEVICE);
+
+ dev_kfree_skb(fp_skb(fp));
+ buf->os_buf = NULL;
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_IO_H_
+#define _FNIC_IO_H_
+
+#include <scsi/fc/fc_fcp.h>
+
+#define FNIC_DFLT_SG_DESC_CNT 32
+#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */
+#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */
+
+struct host_sg_desc {
+ __le64 addr;
+ __le32 len;
+ u32 _resvd;
+};
+
+struct fnic_dflt_sgl_list {
+ struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT];
+};
+
+struct fnic_sgl_list {
+ struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT];
+};
+
+enum fnic_sgl_list_type {
+ FNIC_SGL_CACHE_DFLT = 0, /* cache with default size sgl */
+ FNIC_SGL_CACHE_MAX, /* cache with max size sgl */
+ FNIC_SGL_NUM_CACHES /* number of sgl caches */
+};
+
+enum fnic_ioreq_state {
+ FNIC_IOREQ_CMD_PENDING = 0,
+ FNIC_IOREQ_ABTS_PENDING,
+ FNIC_IOREQ_ABTS_COMPLETE,
+ FNIC_IOREQ_CMD_COMPLETE,
+};
+
+struct fnic_io_req {
+ struct host_sg_desc *sgl_list; /* sgl list */
+ void *sgl_list_alloc; /* sgl list address used for free */
+ dma_addr_t sense_buf_pa; /* dma address for sense buffer*/
+ dma_addr_t sgl_list_pa; /* dma address for sgl list */
+ u16 sgl_cnt;
+ u8 sgl_type; /* device DMA descriptor list type */
+ u8 io_completed:1; /* set to 1 when fw completes IO */
+ u32 port_id; /* remote port DID */
+ struct completion *abts_done; /* completion for abts */
+ struct completion *dr_done; /* completion for device reset */
+};
+
+#endif /* _FNIC_IO_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "fnic_io.h"
+#include "fnic.h"
+
+static irqreturn_t fnic_isr_legacy(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ u32 pba;
+ unsigned long work_done = 0;
+
+ pba = vnic_intr_legacy_pba(fnic->legacy_pba);
+ if (!pba)
+ return IRQ_NONE;
+
+ if (pba & (1 << FNIC_INTX_NOTIFY)) {
+ vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_NOTIFY]);
+ fnic_handle_link_event(fnic);
+ }
+
+ if (pba & (1 << FNIC_INTX_ERR)) {
+ vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_ERR]);
+ fnic_log_q_error(fnic);
+ }
+
+ if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) {
+ work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
+ work_done += fnic_wq_cmpl_handler(fnic, 4);
+ work_done += fnic_rq_cmpl_handler(fnic, 4);
+
+ vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ],
+ work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msi(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long work_done = 0;
+
+ work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
+ work_done += fnic_wq_cmpl_handler(fnic, 4);
+ work_done += fnic_rq_cmpl_handler(fnic, 4);
+
+ vnic_intr_return_credits(&fnic->intr[0],
+ work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_rq(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long rq_work_done = 0;
+
+ rq_work_done = fnic_rq_cmpl_handler(fnic, 4);
+ vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ],
+ rq_work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_wq(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long wq_work_done = 0;
+
+ wq_work_done = fnic_wq_cmpl_handler(fnic, 4);
+ vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ],
+ wq_work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_wq_copy(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long wq_copy_work_done = 0;
+
+ wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8);
+ vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY],
+ wq_copy_work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_err_notify(int irq, void *data)
+{
+ struct fnic *fnic = data;
+
+ vnic_intr_return_all_credits(&fnic->intr[FNIC_MSIX_ERR_NOTIFY]);
+ fnic_log_q_error(fnic);
+ fnic_handle_link_event(fnic);
+
+ return IRQ_HANDLED;
+}
+
+void fnic_free_intr(struct fnic *fnic)
+{
+ int i;
+
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_INTX:
+ case VNIC_DEV_INTR_MODE_MSI:
+ free_irq(fnic->pdev->irq, fnic);
+ break;
+
+ case VNIC_DEV_INTR_MODE_MSIX:
+ for (i = 0; i < ARRAY_SIZE(fnic->msix); i++)
+ if (fnic->msix[i].requested)
+ free_irq(fnic->msix_entry[i].vector,
+ fnic->msix[i].devid);
+ break;
+
+ default:
+ break;
+ }
+}
+
+int fnic_request_intr(struct fnic *fnic)
+{
+ int err = 0;
+ int i;
+
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+
+ case VNIC_DEV_INTR_MODE_INTX:
+ err = request_irq(fnic->pdev->irq, &fnic_isr_legacy,
+ IRQF_SHARED, DRV_NAME, fnic);
+ break;
+
+ case VNIC_DEV_INTR_MODE_MSI:
+ err = request_irq(fnic->pdev->irq, &fnic_isr_msi,
+ 0, fnic->name, fnic);
+ break;
+
+ case VNIC_DEV_INTR_MODE_MSIX:
+
+ sprintf(fnic->msix[FNIC_MSIX_RQ].devname,
+ "%.11s-fcs-rq", fnic->name);
+ fnic->msix[FNIC_MSIX_RQ].isr = fnic_isr_msix_rq;
+ fnic->msix[FNIC_MSIX_RQ].devid = fnic;
+
+ sprintf(fnic->msix[FNIC_MSIX_WQ].devname,
+ "%.11s-fcs-wq", fnic->name);
+ fnic->msix[FNIC_MSIX_WQ].isr = fnic_isr_msix_wq;
+ fnic->msix[FNIC_MSIX_WQ].devid = fnic;
+
+ sprintf(fnic->msix[FNIC_MSIX_WQ_COPY].devname,
+ "%.11s-scsi-wq", fnic->name);
+ fnic->msix[FNIC_MSIX_WQ_COPY].isr = fnic_isr_msix_wq_copy;
+ fnic->msix[FNIC_MSIX_WQ_COPY].devid = fnic;
+
+ sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname,
+ "%.11s-err-notify", fnic->name);
+ fnic->msix[FNIC_MSIX_ERR_NOTIFY].isr =
+ fnic_isr_msix_err_notify;
+ fnic->msix[FNIC_MSIX_ERR_NOTIFY].devid = fnic;
+
+ for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) {
+ err = request_irq(fnic->msix_entry[i].vector,
+ fnic->msix[i].isr, 0,
+ fnic->msix[i].devname,
+ fnic->msix[i].devid);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "MSIX: request_irq"
+ " failed %d\n", err);
+ fnic_free_intr(fnic);
+ break;
+ }
+ fnic->msix[i].requested = 1;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return err;
+}
+
+int fnic_set_intr_mode(struct fnic *fnic)
+{
+ unsigned int n = ARRAY_SIZE(fnic->rq);
+ unsigned int m = ARRAY_SIZE(fnic->wq);
+ unsigned int o = ARRAY_SIZE(fnic->wq_copy);
+ unsigned int i;
+
+ /*
+ * Set interrupt mode (INTx, MSI, MSI-X) depending
+ * system capabilities.
+ *
+ * Try MSI-X first
+ *
+ * We need n RQs, m WQs, o Copy WQs, n+m+o CQs, and n+m+o+1 INTRs
+ * (last INTR is used for WQ/RQ errors and notification area)
+ */
+
+ BUG_ON(ARRAY_SIZE(fnic->msix_entry) < n + m + o + 1);
+ for (i = 0; i < n + m + o + 1; i++)
+ fnic->msix_entry[i].entry = i;
+
+ if (fnic->rq_count >= n &&
+ fnic->raw_wq_count >= m &&
+ fnic->wq_copy_count >= o &&
+ fnic->cq_count >= n + m + o) {
+ if (!pci_enable_msix(fnic->pdev, fnic->msix_entry,
+ n + m + o + 1)) {
+ fnic->rq_count = n;
+ fnic->raw_wq_count = m;
+ fnic->wq_copy_count = o;
+ fnic->wq_count = m + o;
+ fnic->cq_count = n + m + o;
+ fnic->intr_count = n + m + o + 1;
+ fnic->err_intr_offset = FNIC_MSIX_ERR_NOTIFY;
+
+ FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+ "Using MSI-X Interrupts\n");
+ vnic_dev_set_intr_mode(fnic->vdev,
+ VNIC_DEV_INTR_MODE_MSIX);
+ return 0;
+ }
+ }
+
+ /*
+ * Next try MSI
+ * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 1 INTR
+ */
+ if (fnic->rq_count >= 1 &&
+ fnic->raw_wq_count >= 1 &&
+ fnic->wq_copy_count >= 1 &&
+ fnic->cq_count >= 3 &&
+ fnic->intr_count >= 1 &&
+ !pci_enable_msi(fnic->pdev)) {
+
+ fnic->rq_count = 1;
+ fnic->raw_wq_count = 1;
+ fnic->wq_copy_count = 1;
+ fnic->wq_count = 2;
+ fnic->cq_count = 3;
+ fnic->intr_count = 1;
+ fnic->err_intr_offset = 0;
+
+ FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+ "Using MSI Interrupts\n");
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_MSI);
+
+ return 0;
+ }
+
+ /*
+ * Next try INTx
+ * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 3 INTRs
+ * 1 INTR is used for all 3 queues, 1 INTR for queue errors
+ * 1 INTR for notification area
+ */
+
+ if (fnic->rq_count >= 1 &&
+ fnic->raw_wq_count >= 1 &&
+ fnic->wq_copy_count >= 1 &&
+ fnic->cq_count >= 3 &&
+ fnic->intr_count >= 3) {
+
+ fnic->rq_count = 1;
+ fnic->raw_wq_count = 1;
+ fnic->wq_copy_count = 1;
+ fnic->cq_count = 3;
+ fnic->intr_count = 3;
+
+ FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+ "Using Legacy Interrupts\n");
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX);
+
+ return 0;
+ }
+
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN);
+
+ return -EINVAL;
+}
+
+void fnic_clear_intr_mode(struct fnic *fnic)
+{
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_MSIX:
+ pci_disable_msix(fnic->pdev);
+ break;
+ case VNIC_DEV_INTR_MODE_MSI:
+ pci_disable_msi(fnic->pdev);
+ break;
+ default:
+ break;
+ }
+
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX);
+}
+
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/module.h>
+#include <linux/mempool.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "fnic_io.h"
+#include "fnic.h"
+
+#define PCI_DEVICE_ID_CISCO_FNIC 0x0045
+
+/* Timer to poll notification area for events. Used for MSI interrupts */
+#define FNIC_NOTIFY_TIMER_PERIOD (2 * HZ)
+
+static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES];
+static struct kmem_cache *fnic_io_req_cache;
+LIST_HEAD(fnic_list);
+DEFINE_SPINLOCK(fnic_list_lock);
+
+/* Supported devices by fnic module */
+static struct pci_device_id fnic_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) },
+ { 0, }
+};
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Abhijeet Joglekar <abjoglek@cisco.com>, "
+ "Joseph R. Eykholt <jeykholt@cisco.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, fnic_id_table);
+
+unsigned int fnic_log_level;
+module_param(fnic_log_level, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels");
+
+
+static struct libfc_function_template fnic_transport_template = {
+ .frame_send = fnic_send,
+ .fcp_abort_io = fnic_empty_scsi_cleanup,
+ .fcp_cleanup = fnic_empty_scsi_cleanup,
+ .exch_mgr_reset = fnic_exch_mgr_reset
+};
+
+static int fnic_slave_alloc(struct scsi_device *sdev)
+{
+ struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+ struct fc_lport *lp = shost_priv(sdev->host);
+ struct fnic *fnic = lport_priv(lp);
+
+ sdev->tagged_supported = 1;
+
+ if (!rport || fc_remote_port_chkready(rport))
+ return -ENXIO;
+
+ scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH);
+ rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000;
+
+ return 0;
+}
+
+static struct scsi_host_template fnic_host_template = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = fnic_queuecommand,
+ .eh_abort_handler = fnic_abort_cmd,
+ .eh_device_reset_handler = fnic_device_reset,
+ .eh_host_reset_handler = fnic_host_reset,
+ .slave_alloc = fnic_slave_alloc,
+ .change_queue_depth = fc_change_queue_depth,
+ .change_queue_type = fc_change_queue_type,
+ .this_id = -1,
+ .cmd_per_lun = 3,
+ .can_queue = FNIC_MAX_IO_REQ,
+ .use_clustering = ENABLE_CLUSTERING,
+ .sg_tablesize = FNIC_MAX_SG_DESC_CNT,
+ .max_sectors = 0xffff,
+ .shost_attrs = fnic_attrs,
+};
+
+static void fnic_get_host_speed(struct Scsi_Host *shost);
+static struct scsi_transport_template *fnic_fc_transport;
+static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *);
+
+static struct fc_function_template fnic_fc_functions = {
+
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_supported_fc4s = 1,
+ .show_host_active_fc4s = 1,
+ .show_host_maxframe_size = 1,
+ .show_host_port_id = 1,
+ .show_host_supported_speeds = 1,
+ .get_host_speed = fnic_get_host_speed,
+ .show_host_speed = 1,
+ .show_host_port_type = 1,
+ .get_host_port_state = fc_get_host_port_state,
+ .show_host_port_state = 1,
+ .show_host_symbolic_name = 1,
+ .show_rport_maxframe_size = 1,
+ .show_rport_supported_classes = 1,
+ .show_host_fabric_name = 1,
+ .show_starget_node_name = 1,
+ .show_starget_port_name = 1,
+ .show_starget_port_id = 1,
+ .show_rport_dev_loss_tmo = 1,
+ .issue_fc_host_lip = fnic_reset,
+ .get_fc_host_stats = fnic_get_stats,
+ .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
+ .terminate_rport_io = fnic_terminate_rport_io,
+};
+
+static void fnic_get_host_speed(struct Scsi_Host *shost)
+{
+ struct fc_lport *lp = shost_priv(shost);
+ struct fnic *fnic = lport_priv(lp);
+ u32 port_speed = vnic_dev_port_speed(fnic->vdev);
+
+ /* Add in other values as they get defined in fw */
+ switch (port_speed) {
+ case 10000:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ break;
+ default:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ break;
+ }
+}
+
+static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host)
+{
+ int ret;
+ struct fc_lport *lp = shost_priv(host);
+ struct fnic *fnic = lport_priv(lp);
+ struct fc_host_statistics *stats = &lp->host_stats;
+ struct vnic_stats *vs;
+ unsigned long flags;
+
+ if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT))
+ return stats;
+ fnic->stats_time = jiffies;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (ret) {
+ FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic: Get vnic stats failed"
+ " 0x%x", ret);
+ return stats;
+ }
+ vs = fnic->stats;
+ stats->tx_frames = vs->tx.tx_unicast_frames_ok;
+ stats->tx_words = vs->tx.tx_unicast_bytes_ok / 4;
+ stats->rx_frames = vs->rx.rx_unicast_frames_ok;
+ stats->rx_words = vs->rx.rx_unicast_bytes_ok / 4;
+ stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors;
+ stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop;
+ stats->invalid_crc_count = vs->rx.rx_crc_errors;
+ stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ;
+ stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000);
+ stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000);
+
+ return stats;
+}
+
+void fnic_log_q_error(struct fnic *fnic)
+{
+ unsigned int i;
+ u32 error_status;
+
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ error_status = ioread32(&fnic->wq[i].ctrl->error_status);
+ if (error_status)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "WQ[%d] error_status"
+ " %d\n", i, error_status);
+ }
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ error_status = ioread32(&fnic->rq[i].ctrl->error_status);
+ if (error_status)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "RQ[%d] error_status"
+ " %d\n", i, error_status);
+ }
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status);
+ if (error_status)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "CWQ[%d] error_status"
+ " %d\n", i, error_status);
+ }
+}
+
+void fnic_handle_link_event(struct fnic *fnic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ queue_work(fnic_event_queue, &fnic->link_work);
+
+}
+
+static int fnic_notify_set(struct fnic *fnic)
+{
+ int err;
+
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_INTX:
+ err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY);
+ break;
+ case VNIC_DEV_INTR_MODE_MSI:
+ err = vnic_dev_notify_set(fnic->vdev, -1);
+ break;
+ case VNIC_DEV_INTR_MODE_MSIX:
+ err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY);
+ break;
+ default:
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Interrupt mode should be set up"
+ " before devcmd notify set %d\n",
+ vnic_dev_get_intr_mode(fnic->vdev));
+ err = -1;
+ break;
+ }
+
+ return err;
+}
+
+static void fnic_notify_timer(unsigned long data)
+{
+ struct fnic *fnic = (struct fnic *)data;
+
+ fnic_handle_link_event(fnic);
+ mod_timer(&fnic->notify_timer,
+ round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD));
+}
+
+static void fnic_notify_timer_start(struct fnic *fnic)
+{
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_MSI:
+ /*
+ * Schedule first timeout immediately. The driver is
+ * initiatialized and ready to look for link up notification
+ */
+ mod_timer(&fnic->notify_timer, jiffies);
+ break;
+ default:
+ /* Using intr for notification for INTx/MSI-X */
+ break;
+ };
+}
+
+static int fnic_dev_wait(struct vnic_dev *vdev,
+ int (*start)(struct vnic_dev *, int),
+ int (*finished)(struct vnic_dev *, int *),
+ int arg)
+{
+ unsigned long time;
+ int done;
+ int err;
+
+ err = start(vdev, arg);
+ if (err)
+ return err;
+
+ /* Wait for func to complete...2 seconds max */
+ time = jiffies + (HZ * 2);
+ do {
+ err = finished(vdev, &done);
+ if (err)
+ return err;
+ if (done)
+ return 0;
+ schedule_timeout_uninterruptible(HZ / 10);
+ } while (time_after(time, jiffies));
+
+ return -ETIMEDOUT;
+}
+
+static int fnic_cleanup(struct fnic *fnic)
+{
+ unsigned int i;
+ int err;
+ unsigned long flags;
+ struct fc_frame *flogi = NULL;
+ struct fc_frame *flogi_resp = NULL;
+
+ vnic_dev_disable(fnic->vdev);
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_mask(&fnic->intr[i]);
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ err = vnic_rq_disable(&fnic->rq[i]);
+ if (err)
+ return err;
+ }
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ err = vnic_wq_disable(&fnic->wq[i]);
+ if (err)
+ return err;
+ }
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ err = vnic_wq_copy_disable(&fnic->wq_copy[i]);
+ if (err)
+ return err;
+ }
+
+ /* Clean up completed IOs and FCS frames */
+ fnic_wq_copy_cmpl_handler(fnic, -1);
+ fnic_wq_cmpl_handler(fnic, -1);
+ fnic_rq_cmpl_handler(fnic, -1);
+
+ /* Clean up the IOs and FCS frames that have not completed */
+ for (i = 0; i < fnic->raw_wq_count; i++)
+ vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf);
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
+ for (i = 0; i < fnic->wq_copy_count; i++)
+ vnic_wq_copy_clean(&fnic->wq_copy[i],
+ fnic_wq_copy_cleanup_handler);
+
+ for (i = 0; i < fnic->cq_count; i++)
+ vnic_cq_clean(&fnic->cq[i]);
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_clean(&fnic->intr[i]);
+
+ /*
+ * Remove cached flogi and flogi resp frames if any
+ * These frames are not in any queue, and therefore queue
+ * cleanup does not clean them. So clean them explicitly
+ */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ flogi = fnic->flogi;
+ fnic->flogi = NULL;
+ flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (flogi)
+ dev_kfree_skb(fp_skb(flogi));
+
+ if (flogi_resp)
+ dev_kfree_skb(fp_skb(flogi_resp));
+
+ mempool_destroy(fnic->io_req_pool);
+ for (i = 0; i < FNIC_SGL_NUM_CACHES; i++)
+ mempool_destroy(fnic->io_sgl_pool[i]);
+
+ return 0;
+}
+
+static void fnic_iounmap(struct fnic *fnic)
+{
+ if (fnic->bar0.vaddr)
+ iounmap(fnic->bar0.vaddr);
+}
+
+/*
+ * Allocate element for mempools requiring GFP_DMA flag.
+ * Otherwise, checks in kmem_flagcheck() hit BUG_ON().
+ */
+static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data)
+{
+ struct kmem_cache *mem = pool_data;
+
+ return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA);
+}
+
+static int __devinit fnic_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct Scsi_Host *host;
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ mempool_t *pool;
+ int err;
+ int i;
+ unsigned long flags;
+
+ /*
+ * Allocate SCSI Host and set up association between host,
+ * local port, and fnic
+ */
+ host = scsi_host_alloc(&fnic_host_template,
+ sizeof(struct fc_lport) + sizeof(struct fnic));
+ if (!host) {
+ printk(KERN_ERR PFX "Unable to alloc SCSI host\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+ lp = shost_priv(host);
+ lp->host = host;
+ fnic = lport_priv(lp);
+ fnic->lport = lp;
+
+ snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME,
+ host->host_no);
+
+ host->transportt = fnic_fc_transport;
+
+ err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to alloc shared tag map\n");
+ goto err_out_free_hba;
+ }
+
+ /* Setup PCI resources */
+ pci_set_drvdata(pdev, fnic);
+
+ fnic->pdev = pdev;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Cannot enable PCI device, aborting.\n");
+ goto err_out_free_hba;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Cannot enable PCI resources, aborting\n");
+ goto err_out_disable_device;
+ }
+
+ pci_set_master(pdev);
+
+ /* Query PCI controller on system for DMA addressing
+ * limitation for the device. Try 40-bit first, and
+ * fail to 32-bit.
+ */
+ err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "No usable DMA configuration "
+ "aborting\n");
+ goto err_out_release_regions;
+ }
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to obtain 32-bit DMA "
+ "for consistent allocations, aborting.\n");
+ goto err_out_release_regions;
+ }
+ } else {
+ err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to obtain 40-bit DMA "
+ "for consistent allocations, aborting.\n");
+ goto err_out_release_regions;
+ }
+ }
+
+ /* Map vNIC resources from BAR0 */
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "BAR0 not memory-map'able, aborting.\n");
+ err = -ENODEV;
+ goto err_out_release_regions;
+ }
+
+ fnic->bar0.vaddr = pci_iomap(pdev, 0, 0);
+ fnic->bar0.bus_addr = pci_resource_start(pdev, 0);
+ fnic->bar0.len = pci_resource_len(pdev, 0);
+
+ if (!fnic->bar0.vaddr) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Cannot memory-map BAR0 res hdr, "
+ "aborting.\n");
+ err = -ENODEV;
+ goto err_out_release_regions;
+ }
+
+ fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0);
+ if (!fnic->vdev) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC registration failed, "
+ "aborting.\n");
+ err = -ENODEV;
+ goto err_out_iounmap;
+ }
+
+ err = fnic_dev_wait(fnic->vdev, vnic_dev_open,
+ vnic_dev_open_done, 0);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC dev open failed, aborting.\n");
+ goto err_out_vnic_unregister;
+ }
+
+ err = vnic_dev_init(fnic->vdev, 0);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC dev init failed, aborting.\n");
+ goto err_out_dev_close;
+ }
+
+ err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC get MAC addr failed \n");
+ goto err_out_dev_close;
+ }
+
+ /* Get vNIC configuration */
+ err = fnic_get_vnic_config(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Get vNIC configuration failed, "
+ "aborting.\n");
+ goto err_out_dev_close;
+ }
+ host->max_lun = fnic->config.luns_per_tgt;
+ host->max_id = FNIC_MAX_FCP_TARGET;
+
+ fnic_get_res_counts(fnic);
+
+ err = fnic_set_intr_mode(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to set intr mode, "
+ "aborting.\n");
+ goto err_out_dev_close;
+ }
+
+ err = fnic_request_intr(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to request irq.\n");
+ goto err_out_clear_intr;
+ }
+
+ err = fnic_alloc_vnic_resources(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to alloc vNIC resources, "
+ "aborting.\n");
+ goto err_out_free_intr;
+ }
+
+
+ /* initialize all fnic locks */
+ spin_lock_init(&fnic->fnic_lock);
+
+ for (i = 0; i < FNIC_WQ_MAX; i++)
+ spin_lock_init(&fnic->wq_lock[i]);
+
+ for (i = 0; i < FNIC_WQ_COPY_MAX; i++) {
+ spin_lock_init(&fnic->wq_copy_lock[i]);
+ fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK;
+ fnic->fw_ack_recd[i] = 0;
+ fnic->fw_ack_index[i] = -1;
+ }
+
+ for (i = 0; i < FNIC_IO_LOCKS; i++)
+ spin_lock_init(&fnic->io_req_lock[i]);
+
+ fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache);
+ if (!fnic->io_req_pool)
+ goto err_out_free_resources;
+
+ pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
+ fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+ if (!pool)
+ goto err_out_free_ioreq_pool;
+ fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool;
+
+ pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
+ fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+ if (!pool)
+ goto err_out_free_dflt_pool;
+ fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool;
+
+ /* setup vlan config, hw inserts vlan header */
+ fnic->vlan_hw_insert = 1;
+ fnic->vlan_id = 0;
+
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+ fnic->flogi = NULL;
+ fnic->flogi_resp = NULL;
+ fnic->state = FNIC_IN_FC_MODE;
+
+ /* Enable hardware stripping of vlan header on ingress */
+ fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1);
+
+ /* Setup notification buffer area */
+ err = fnic_notify_set(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to alloc notify buffer, aborting.\n");
+ goto err_out_free_max_pool;
+ }
+
+ /* Setup notify timer when using MSI interrupts */
+ if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
+ setup_timer(&fnic->notify_timer,
+ fnic_notify_timer, (unsigned long)fnic);
+
+ /* allocate RQ buffers and post them to RQ*/
+ for (i = 0; i < fnic->rq_count; i++) {
+ err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic_alloc_rq_frame can't alloc "
+ "frame\n");
+ goto err_out_free_rq_buf;
+ }
+ }
+
+ /*
+ * Initialization done with PCI system, hardware, firmware.
+ * Add host to SCSI
+ */
+ err = scsi_add_host(lp->host, &pdev->dev);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic: scsi_add_host failed...exiting\n");
+ goto err_out_free_rq_buf;
+ }
+
+ /* Start local port initiatialization */
+
+ lp->link_up = 0;
+ lp->tt = fnic_transport_template;
+
+ lp->emp = fc_exch_mgr_alloc(lp, FC_CLASS_3,
+ FCPIO_HOST_EXCH_RANGE_START,
+ FCPIO_HOST_EXCH_RANGE_END);
+ if (!lp->emp) {
+ err = -ENOMEM;
+ goto err_out_remove_scsi_host;
+ }
+
+ lp->max_retry_count = fnic->config.flogi_retries;
+ lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
+ FCP_SPPF_CONF_COMPL);
+ if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
+ lp->service_params |= FCP_SPPF_RETRY;
+
+ lp->boot_time = jiffies;
+ lp->e_d_tov = fnic->config.ed_tov;
+ lp->r_a_tov = fnic->config.ra_tov;
+ lp->link_supported_speeds = FC_PORTSPEED_10GBIT;
+ fc_set_wwnn(lp, fnic->config.node_wwn);
+ fc_set_wwpn(lp, fnic->config.port_wwn);
+
+ fc_exch_init(lp);
+ fc_lport_init(lp);
+ fc_elsct_init(lp);
+ fc_rport_init(lp);
+ fc_disc_init(lp);
+
+ fc_lport_config(lp);
+
+ if (fc_set_mfs(lp, fnic->config.maxdatafieldsize +
+ sizeof(struct fc_frame_header))) {
+ err = -EINVAL;
+ goto err_out_free_exch_mgr;
+ }
+ fc_host_maxframe_size(lp->host) = lp->mfs;
+
+ sprintf(fc_host_symbolic_name(lp->host),
+ DRV_NAME " v" DRV_VERSION " over %s", fnic->name);
+
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ list_add_tail(&fnic->list, &fnic_list);
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+
+ INIT_WORK(&fnic->link_work, fnic_handle_link);
+ INIT_WORK(&fnic->frame_work, fnic_handle_frame);
+ skb_queue_head_init(&fnic->frame_queue);
+
+ /* Enable all queues */
+ for (i = 0; i < fnic->raw_wq_count; i++)
+ vnic_wq_enable(&fnic->wq[i]);
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_enable(&fnic->rq[i]);
+ for (i = 0; i < fnic->wq_copy_count; i++)
+ vnic_wq_copy_enable(&fnic->wq_copy[i]);
+
+ fc_fabric_login(lp);
+
+ vnic_dev_enable(fnic->vdev);
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_unmask(&fnic->intr[i]);
+
+ fnic_notify_timer_start(fnic);
+
+ return 0;
+
+err_out_free_exch_mgr:
+ fc_exch_mgr_free(lp->emp);
+err_out_remove_scsi_host:
+ fc_remove_host(fnic->lport->host);
+ scsi_remove_host(fnic->lport->host);
+err_out_free_rq_buf:
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
+ vnic_dev_notify_unset(fnic->vdev);
+err_out_free_max_pool:
+ mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]);
+err_out_free_dflt_pool:
+ mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]);
+err_out_free_ioreq_pool:
+ mempool_destroy(fnic->io_req_pool);
+err_out_free_resources:
+ fnic_free_vnic_resources(fnic);
+err_out_free_intr:
+ fnic_free_intr(fnic);
+err_out_clear_intr:
+ fnic_clear_intr_mode(fnic);
+err_out_dev_close:
+ vnic_dev_close(fnic->vdev);
+err_out_vnic_unregister:
+ vnic_dev_unregister(fnic->vdev);
+err_out_iounmap:
+ fnic_iounmap(fnic);
+err_out_release_regions:
+ pci_release_regions(pdev);
+err_out_disable_device:
+ pci_disable_device(pdev);
+err_out_free_hba:
+ scsi_host_put(lp->host);
+err_out:
+ return err;
+}
+
+static void __devexit fnic_remove(struct pci_dev *pdev)
+{
+ struct fnic *fnic = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ /*
+ * Mark state so that the workqueue thread stops forwarding
+ * received frames and link events to the local port. ISR and
+ * other threads that can queue work items will also stop
+ * creating work items on the fnic workqueue
+ */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->stop_rx_link_events = 1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
+ del_timer_sync(&fnic->notify_timer);
+
+ /*
+ * Flush the fnic event queue. After this call, there should
+ * be no event queued for this fnic device in the workqueue
+ */
+ flush_workqueue(fnic_event_queue);
+ skb_queue_purge(&fnic->frame_queue);
+
+ /*
+ * Log off the fabric. This stops all remote ports, dns port,
+ * logs off the fabric. This flushes all rport, disc, lport work
+ * before returning
+ */
+ fc_fabric_logoff(fnic->lport);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->in_remove = 1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ fc_lport_destroy(fnic->lport);
+
+ /*
+ * This stops the fnic device, masks all interrupts. Completed
+ * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are
+ * cleaned up
+ */
+ fnic_cleanup(fnic);
+
+ BUG_ON(!skb_queue_empty(&fnic->frame_queue));
+
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ list_del(&fnic->list);
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+
+ fc_remove_host(fnic->lport->host);
+ scsi_remove_host(fnic->lport->host);
+ fc_exch_mgr_free(fnic->lport->emp);
+ vnic_dev_notify_unset(fnic->vdev);
+ fnic_free_vnic_resources(fnic);
+ fnic_free_intr(fnic);
+ fnic_clear_intr_mode(fnic);
+ vnic_dev_close(fnic->vdev);
+ vnic_dev_unregister(fnic->vdev);
+ fnic_iounmap(fnic);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ scsi_host_put(fnic->lport->host);
+}
+
+static struct pci_driver fnic_driver = {
+ .name = DRV_NAME,
+ .id_table = fnic_id_table,
+ .probe = fnic_probe,
+ .remove = __devexit_p(fnic_remove),
+};
+
+static int __init fnic_init_module(void)
+{
+ size_t len;
+ int err = 0;
+
+ printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION);
+
+ /* Create a cache for allocation of default size sgls */
+ len = sizeof(struct fnic_dflt_sgl_list);
+ fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create
+ ("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
+ SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
+ NULL);
+ if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) {
+ printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n");
+ err = -ENOMEM;
+ goto err_create_fnic_sgl_slab_dflt;
+ }
+
+ /* Create a cache for allocation of max size sgls*/
+ len = sizeof(struct fnic_sgl_list);
+ fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create
+ ("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
+ SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
+ NULL);
+ if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) {
+ printk(KERN_ERR PFX "failed to create fnic max sgl slab\n");
+ err = -ENOMEM;
+ goto err_create_fnic_sgl_slab_max;
+ }
+
+ /* Create a cache of io_req structs for use via mempool */
+ fnic_io_req_cache = kmem_cache_create("fnic_io_req",
+ sizeof(struct fnic_io_req),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!fnic_io_req_cache) {
+ printk(KERN_ERR PFX "failed to create fnic io_req slab\n");
+ err = -ENOMEM;
+ goto err_create_fnic_ioreq_slab;
+ }
+
+ fnic_event_queue = create_singlethread_workqueue("fnic_event_wq");
+ if (!fnic_event_queue) {
+ printk(KERN_ERR PFX "fnic work queue create failed\n");
+ err = -ENOMEM;
+ goto err_create_fnic_workq;
+ }
+
+ spin_lock_init(&fnic_list_lock);
+ INIT_LIST_HEAD(&fnic_list);
+
+ fnic_fc_transport = fc_attach_transport(&fnic_fc_functions);
+ if (!fnic_fc_transport) {
+ printk(KERN_ERR PFX "fc_attach_transport error\n");
+ err = -ENOMEM;
+ goto err_fc_transport;
+ }
+
+ /* register the driver with PCI system */
+ err = pci_register_driver(&fnic_driver);
+ if (err < 0) {
+ printk(KERN_ERR PFX "pci register error\n");
+ goto err_pci_register;
+ }
+ return err;
+
+err_pci_register:
+ fc_release_transport(fnic_fc_transport);
+err_fc_transport:
+ destroy_workqueue(fnic_event_queue);
+err_create_fnic_workq:
+ kmem_cache_destroy(fnic_io_req_cache);
+err_create_fnic_ioreq_slab:
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+err_create_fnic_sgl_slab_max:
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+err_create_fnic_sgl_slab_dflt:
+ return err;
+}
+
+static void __exit fnic_cleanup_module(void)
+{
+ pci_unregister_driver(&fnic_driver);
+ destroy_workqueue(fnic_event_queue);
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+ kmem_cache_destroy(fnic_io_req_cache);
+ fc_release_transport(fnic_fc_transport);
+}
+
+module_init(fnic_init_module);
+module_exit(fnic_cleanup_module);
+
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+#include "cq_enet_desc.h"
+#include "vnic_resource.h"
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "vnic_nic.h"
+#include "fnic.h"
+
+int fnic_get_vnic_config(struct fnic *fnic)
+{
+ struct vnic_fc_config *c = &fnic->config;
+ int err;
+
+#define GET_CONFIG(m) \
+ do { \
+ err = vnic_dev_spec(fnic->vdev, \
+ offsetof(struct vnic_fc_config, m), \
+ sizeof(c->m), &c->m); \
+ if (err) { \
+ shost_printk(KERN_ERR, fnic->lport->host, \
+ "Error getting %s, %d\n", #m, \
+ err); \
+ return err; \
+ } \
+ } while (0);
+
+ GET_CONFIG(node_wwn);
+ GET_CONFIG(port_wwn);
+ GET_CONFIG(wq_enet_desc_count);
+ GET_CONFIG(wq_copy_desc_count);
+ GET_CONFIG(rq_desc_count);
+ GET_CONFIG(maxdatafieldsize);
+ GET_CONFIG(ed_tov);
+ GET_CONFIG(ra_tov);
+ GET_CONFIG(intr_timer);
+ GET_CONFIG(intr_timer_type);
+ GET_CONFIG(flags);
+ GET_CONFIG(flogi_retries);
+ GET_CONFIG(flogi_timeout);
+ GET_CONFIG(plogi_retries);
+ GET_CONFIG(plogi_timeout);
+ GET_CONFIG(io_throttle_count);
+ GET_CONFIG(link_down_timeout);
+ GET_CONFIG(port_down_timeout);
+ GET_CONFIG(port_down_io_retries);
+ GET_CONFIG(luns_per_tgt);
+
+ c->wq_enet_desc_count =
+ min_t(u32, VNIC_FNIC_WQ_DESCS_MAX,
+ max_t(u32, VNIC_FNIC_WQ_DESCS_MIN,
+ c->wq_enet_desc_count));
+ c->wq_enet_desc_count = ALIGN(c->wq_enet_desc_count, 16);
+
+ c->wq_copy_desc_count =
+ min_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MAX,
+ max_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MIN,
+ c->wq_copy_desc_count));
+ c->wq_copy_desc_count = ALIGN(c->wq_copy_desc_count, 16);
+
+ c->rq_desc_count =
+ min_t(u32, VNIC_FNIC_RQ_DESCS_MAX,
+ max_t(u32, VNIC_FNIC_RQ_DESCS_MIN,
+ c->rq_desc_count));
+ c->rq_desc_count = ALIGN(c->rq_desc_count, 16);
+
+ c->maxdatafieldsize =
+ min_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MAX,
+ max_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MIN,
+ c->maxdatafieldsize));
+ c->ed_tov =
+ min_t(u32, VNIC_FNIC_EDTOV_MAX,
+ max_t(u32, VNIC_FNIC_EDTOV_MIN,
+ c->ed_tov));
+
+ c->ra_tov =
+ min_t(u32, VNIC_FNIC_RATOV_MAX,
+ max_t(u32, VNIC_FNIC_RATOV_MIN,
+ c->ra_tov));
+
+ c->flogi_retries =
+ min_t(u32, VNIC_FNIC_FLOGI_RETRIES_MAX, c->flogi_retries);
+
+ c->flogi_timeout =
+ min_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MAX,
+ max_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MIN,
+ c->flogi_timeout));
+
+ c->plogi_retries =
+ min_t(u32, VNIC_FNIC_PLOGI_RETRIES_MAX, c->plogi_retries);
+
+ c->plogi_timeout =
+ min_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MAX,
+ max_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MIN,
+ c->plogi_timeout));
+
+ c->io_throttle_count =
+ min_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MAX,
+ max_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MIN,
+ c->io_throttle_count));
+
+ c->link_down_timeout =
+ min_t(u32, VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX,
+ c->link_down_timeout);
+
+ c->port_down_timeout =
+ min_t(u32, VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX,
+ c->port_down_timeout);
+
+ c->port_down_io_retries =
+ min_t(u32, VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX,
+ c->port_down_io_retries);
+
+ c->luns_per_tgt =
+ min_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MAX,
+ max_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MIN,
+ c->luns_per_tgt));
+
+ c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer);
+ c->intr_timer_type = c->intr_timer_type;
+
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x "
+ "wq/wq_copy/rq %d/%d/%d\n",
+ fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2],
+ fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5],
+ c->wq_enet_desc_count, c->wq_copy_desc_count,
+ c->rq_desc_count);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC node wwn %llx port wwn %llx\n",
+ c->node_wwn, c->port_wwn);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC ed_tov %d ra_tov %d\n",
+ c->ed_tov, c->ra_tov);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC mtu %d intr timer %d\n",
+ c->maxdatafieldsize, c->intr_timer);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC flags 0x%x luns per tgt %d\n",
+ c->flags, c->luns_per_tgt);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC flogi_retries %d flogi timeout %d\n",
+ c->flogi_retries, c->flogi_timeout);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC plogi retries %d plogi timeout %d\n",
+ c->plogi_retries, c->plogi_timeout);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC io throttle count %d link dn timeout %d\n",
+ c->io_throttle_count, c->link_down_timeout);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC port dn io retries %d port dn timeout %d\n",
+ c->port_down_io_retries, c->port_down_timeout);
+
+ return 0;
+}
+
+int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
+ u8 rss_hash_type,
+ u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable,
+ u8 tso_ipid_split_en, u8 ig_vlan_strip_en)
+{
+ u64 a0, a1;
+ u32 nic_cfg;
+ int wait = 1000;
+
+ vnic_set_nic_cfg(&nic_cfg, rss_default_cpu,
+ rss_hash_type, rss_hash_bits, rss_base_cpu,
+ rss_enable, tso_ipid_split_en, ig_vlan_strip_en);
+
+ a0 = nic_cfg;
+ a1 = 0;
+
+ return vnic_dev_cmd(fnic->vdev, CMD_NIC_CFG, &a0, &a1, wait);
+}
+
+void fnic_get_res_counts(struct fnic *fnic)
+{
+ fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ);
+ fnic->raw_wq_count = fnic->wq_count - 1;
+ fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count;
+ fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ);
+ fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ);
+ fnic->intr_count = vnic_dev_get_res_count(fnic->vdev,
+ RES_TYPE_INTR_CTRL);
+}
+
+void fnic_free_vnic_resources(struct fnic *fnic)
+{
+ unsigned int i;
+
+ for (i = 0; i < fnic->raw_wq_count; i++)
+ vnic_wq_free(&fnic->wq[i]);
+
+ for (i = 0; i < fnic->wq_copy_count; i++)
+ vnic_wq_copy_free(&fnic->wq_copy[i]);
+
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_free(&fnic->rq[i]);
+
+ for (i = 0; i < fnic->cq_count; i++)
+ vnic_cq_free(&fnic->cq[i]);
+
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_free(&fnic->intr[i]);
+}
+
+int fnic_alloc_vnic_resources(struct fnic *fnic)
+{
+ enum vnic_dev_intr_mode intr_mode;
+ unsigned int mask_on_assertion;
+ unsigned int interrupt_offset;
+ unsigned int error_interrupt_enable;
+ unsigned int error_interrupt_offset;
+ unsigned int i, cq_index;
+ unsigned int wq_copy_cq_desc_count;
+ int err;
+
+ intr_mode = vnic_dev_get_intr_mode(fnic->vdev);
+
+ shost_printk(KERN_INFO, fnic->lport->host, "vNIC interrupt mode: %s\n",
+ intr_mode == VNIC_DEV_INTR_MODE_INTX ? "legacy PCI INTx" :
+ intr_mode == VNIC_DEV_INTR_MODE_MSI ? "MSI" :
+ intr_mode == VNIC_DEV_INTR_MODE_MSIX ?
+ "MSI-X" : "unknown");
+
+ shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: "
+ "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n",
+ fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count,
+ fnic->rq_count, fnic->cq_count, fnic->intr_count);
+
+ /* Allocate Raw WQ used for FCS frames */
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ err = vnic_wq_alloc(fnic->vdev, &fnic->wq[i], i,
+ fnic->config.wq_enet_desc_count,
+ sizeof(struct wq_enet_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* Allocate Copy WQs used for SCSI IOs */
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ err = vnic_wq_copy_alloc(fnic->vdev, &fnic->wq_copy[i],
+ (fnic->raw_wq_count + i),
+ fnic->config.wq_copy_desc_count,
+ sizeof(struct fcpio_host_req));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* RQ for receiving FCS frames */
+ for (i = 0; i < fnic->rq_count; i++) {
+ err = vnic_rq_alloc(fnic->vdev, &fnic->rq[i], i,
+ fnic->config.rq_desc_count,
+ sizeof(struct rq_enet_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* CQ for each RQ */
+ for (i = 0; i < fnic->rq_count; i++) {
+ cq_index = i;
+ err = vnic_cq_alloc(fnic->vdev,
+ &fnic->cq[cq_index], cq_index,
+ fnic->config.rq_desc_count,
+ sizeof(struct cq_enet_rq_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* CQ for each WQ */
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ cq_index = fnic->rq_count + i;
+ err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], cq_index,
+ fnic->config.wq_enet_desc_count,
+ sizeof(struct cq_enet_wq_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* CQ for each COPY WQ */
+ wq_copy_cq_desc_count = (fnic->config.wq_copy_desc_count * 3);
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ cq_index = fnic->raw_wq_count + fnic->rq_count + i;
+ err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index],
+ cq_index,
+ wq_copy_cq_desc_count,
+ sizeof(struct fcpio_fw_req));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ for (i = 0; i < fnic->intr_count; i++) {
+ err = vnic_intr_alloc(fnic->vdev, &fnic->intr[i], i);
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ fnic->legacy_pba = vnic_dev_get_res(fnic->vdev,
+ RES_TYPE_INTR_PBA_LEGACY, 0);
+
+ if (!fnic->legacy_pba && intr_mode == VNIC_DEV_INTR_MODE_INTX) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to hook legacy pba resource\n");
+ err = -ENODEV;
+ goto err_out_cleanup;
+ }
+
+ /*
+ * Init RQ/WQ resources.
+ *
+ * RQ[0 to n-1] point to CQ[0 to n-1]
+ * WQ[0 to m-1] point to CQ[n to n+m-1]
+ * WQ_COPY[0 to k-1] points to CQ[n+m to n+m+k-1]
+ *
+ * Note for copy wq we always initialize with cq_index = 0
+ *
+ * Error interrupt is not enabled for MSI.
+ */
+
+ switch (intr_mode) {
+ case VNIC_DEV_INTR_MODE_INTX:
+ case VNIC_DEV_INTR_MODE_MSIX:
+ error_interrupt_enable = 1;
+ error_interrupt_offset = fnic->err_intr_offset;
+ break;
+ default:
+ error_interrupt_enable = 0;
+ error_interrupt_offset = 0;
+ break;
+ }
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ cq_index = i;
+ vnic_rq_init(&fnic->rq[i],
+ cq_index,
+ error_interrupt_enable,
+ error_interrupt_offset);
+ }
+
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ cq_index = i + fnic->rq_count;
+ vnic_wq_init(&fnic->wq[i],
+ cq_index,
+ error_interrupt_enable,
+ error_interrupt_offset);
+ }
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ vnic_wq_copy_init(&fnic->wq_copy[i],
+ 0 /* cq_index 0 - always */,
+ error_interrupt_enable,
+ error_interrupt_offset);
+ }
+
+ for (i = 0; i < fnic->cq_count; i++) {
+
+ switch (intr_mode) {
+ case VNIC_DEV_INTR_MODE_MSIX:
+ interrupt_offset = i;
+ break;
+ default:
+ interrupt_offset = 0;
+ break;
+ }
+
+ vnic_cq_init(&fnic->cq[i],
+ 0 /* flow_control_enable */,
+ 1 /* color_enable */,
+ 0 /* cq_head */,
+ 0 /* cq_tail */,
+ 1 /* cq_tail_color */,
+ 1 /* interrupt_enable */,
+ 1 /* cq_entry_enable */,
+ 0 /* cq_message_enable */,
+ interrupt_offset,
+ 0 /* cq_message_addr */);
+ }
+
+ /*
+ * Init INTR resources
+ *
+ * mask_on_assertion is not used for INTx due to the level-
+ * triggered nature of INTx
+ */
+
+ switch (intr_mode) {
+ case VNIC_DEV_INTR_MODE_MSI:
+ case VNIC_DEV_INTR_MODE_MSIX:
+ mask_on_assertion = 1;
+ break;
+ default:
+ mask_on_assertion = 0;
+ break;
+ }
+
+ for (i = 0; i < fnic->intr_count; i++) {
+ vnic_intr_init(&fnic->intr[i],
+ fnic->config.intr_timer,
+ fnic->config.intr_timer_type,
+ mask_on_assertion);
+ }
+
+ /* init the stats memory by making the first call here */
+ err = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vnic_dev_stats_dump failed - x%x\n", err);
+ goto err_out_cleanup;
+ }
+
+ /* Clear LIF stats */
+ vnic_dev_stats_clear(fnic->vdev);
+
+ return 0;
+
+err_out_cleanup:
+ fnic_free_vnic_resources(fnic);
+
+ return err;
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_RES_H_
+#define _FNIC_RES_H_
+
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "fnic_io.h"
+#include "fcpio.h"
+#include "vnic_wq_copy.h"
+#include "vnic_cq_copy.h"
+
+static inline void fnic_queue_wq_desc(struct vnic_wq *wq,
+ void *os_buf, dma_addr_t dma_addr,
+ unsigned int len, unsigned int fc_eof,
+ int vlan_tag_insert,
+ unsigned int vlan_tag,
+ int cq_entry, int sop, int eop)
+{
+ struct wq_enet_desc *desc = vnic_wq_next_desc(wq);
+
+ wq_enet_desc_enc(desc,
+ (u64)dma_addr | VNIC_PADDR_TARGET,
+ (u16)len,
+ 0, /* mss_or_csum_offset */
+ (u16)fc_eof,
+ 0, /* offload_mode */
+ (u8)eop, (u8)cq_entry,
+ 1, /* fcoe_encap */
+ (u8)vlan_tag_insert,
+ (u16)vlan_tag,
+ 0 /* loopback */);
+
+ vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop);
+}
+
+static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq,
+ u32 req_id,
+ u32 lunmap_id, u8 spl_flags,
+ u32 sgl_cnt, u32 sense_len,
+ u64 sgl_addr, u64 sns_addr,
+ u8 crn, u8 pri_ta,
+ u8 flags, u8 *scsi_cdb,
+ u32 data_len, u8 *lun,
+ u32 d_id, u16 mss,
+ u32 ratov, u32 edtov)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_ICMND_16; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.icmnd_16.lunmap_id = lunmap_id; /* index into lunmap table */
+ desc->u.icmnd_16.special_req_flags = spl_flags; /* exch req flags */
+ desc->u.icmnd_16._resvd0[0] = 0; /* reserved */
+ desc->u.icmnd_16._resvd0[1] = 0; /* reserved */
+ desc->u.icmnd_16._resvd0[2] = 0; /* reserved */
+ desc->u.icmnd_16.sgl_cnt = sgl_cnt; /* scatter-gather list count */
+ desc->u.icmnd_16.sense_len = sense_len; /* sense buffer length */
+ desc->u.icmnd_16.sgl_addr = sgl_addr; /* scatter-gather list addr */
+ desc->u.icmnd_16.sense_addr = sns_addr; /* sense buffer address */
+ desc->u.icmnd_16.crn = crn; /* SCSI Command Reference No.*/
+ desc->u.icmnd_16.pri_ta = pri_ta; /* SCSI Pri & Task attribute */
+ desc->u.icmnd_16._resvd1 = 0; /* reserved: should be 0 */
+ desc->u.icmnd_16.flags = flags; /* command flags */
+ memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16); /* SCSI CDB */
+ desc->u.icmnd_16.data_len = data_len; /* length of data expected */
+ memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS); /* LUN address */
+ desc->u.icmnd_16._resvd2 = 0; /* reserved */
+ hton24(desc->u.icmnd_16.d_id, d_id); /* FC vNIC only: Target D_ID */
+ desc->u.icmnd_16.mss = mss; /* FC vNIC only: max burst */
+ desc->u.icmnd_16.r_a_tov = ratov; /*FC vNIC only: Res. Alloc Timeout */
+ desc->u.icmnd_16.e_d_tov = edtov; /*FC vNIC only: Err Detect Timeout */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_itmf(struct vnic_wq_copy *wq,
+ u32 req_id, u32 lunmap_id,
+ u32 tm_req, u32 tm_id, u8 *lun,
+ u32 d_id, u32 r_a_tov,
+ u32 e_d_tov)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_ITMF; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.itmf.lunmap_id = lunmap_id; /* index into lunmap table */
+ desc->u.itmf.tm_req = tm_req; /* SCSI Task Management request */
+ desc->u.itmf.t_tag = tm_id; /* tag of fcpio to be aborted */
+ desc->u.itmf._resvd = 0;
+ memcpy(desc->u.itmf.lun, lun, LUN_ADDRESS); /* LUN address */
+ desc->u.itmf._resvd1 = 0;
+ hton24(desc->u.itmf.d_id, d_id); /* FC vNIC only: Target D_ID */
+ desc->u.itmf.r_a_tov = r_a_tov; /* FC vNIC only: R_A_TOV in msec */
+ desc->u.itmf.e_d_tov = e_d_tov; /* FC vNIC only: E_D_TOV in msec */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq,
+ u32 req_id, u8 format,
+ u32 s_id, u8 *gw_mac)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_FLOGI_REG; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.flogi_reg.format = format;
+ hton24(desc->u.flogi_reg.s_id, s_id);
+ memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN);
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq,
+ u32 req_id)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_RESET; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_lunmap(struct vnic_wq_copy *wq,
+ u32 req_id, u64 lunmap_addr,
+ u32 lunmap_len)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_LUNMAP_REQ; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.lunmap_req.addr = lunmap_addr; /* address of the buffer */
+ desc->u.lunmap_req.len = lunmap_len; /* len of the buffer */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_rq_desc(struct vnic_rq *rq,
+ void *os_buf, dma_addr_t dma_addr,
+ u16 len)
+{
+ struct rq_enet_desc *desc = vnic_rq_next_desc(rq);
+
+ rq_enet_desc_enc(desc,
+ (u64)dma_addr | VNIC_PADDR_TARGET,
+ RQ_ENET_TYPE_ONLY_SOP,
+ (u16)len);
+
+ vnic_rq_post(rq, os_buf, 0, dma_addr, len);
+}
+
+
+struct fnic;
+
+int fnic_get_vnic_config(struct fnic *);
+int fnic_alloc_vnic_resources(struct fnic *);
+void fnic_free_vnic_resources(struct fnic *);
+void fnic_get_res_counts(struct fnic *);
+int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
+ u8 rss_hash_type, u8 rss_hash_bits, u8 rss_base_cpu,
+ u8 rss_enable, u8 tso_ipid_split_en,
+ u8 ig_vlan_strip_en);
+
+#endif /* _FNIC_RES_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/mempool.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/delay.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+#include "fnic_io.h"
+#include "fnic.h"
+
+const char *fnic_state_str[] = {
+ [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE",
+ [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE",
+ [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE",
+ [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE",
+};
+
+static const char *fnic_ioreq_state_str[] = {
+ [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING",
+ [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING",
+ [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE",
+ [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE",
+};
+
+static const char *fcpio_status_str[] = {
+ [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/
+ [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER",
+ [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE",
+ [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]",
+ [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED",
+ [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND",
+ [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/
+ [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT",
+ [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID",
+ [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID",
+ [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH",
+ [FCPIO_FW_ERR] = "FCPIO_FW_ERR",
+ [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED",
+ [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED",
+ [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN",
+ [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED",
+ [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL",
+ [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED",
+ [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND",
+};
+
+const char *fnic_state_to_str(unsigned int state)
+{
+ if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state])
+ return "unknown";
+
+ return fnic_state_str[state];
+}
+
+static const char *fnic_ioreq_state_to_str(unsigned int state)
+{
+ if (state >= ARRAY_SIZE(fnic_ioreq_state_str) ||
+ !fnic_ioreq_state_str[state])
+ return "unknown";
+
+ return fnic_ioreq_state_str[state];
+}
+
+static const char *fnic_fcpio_status_to_str(unsigned int status)
+{
+ if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status])
+ return "unknown";
+
+ return fcpio_status_str[status];
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
+
+static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
+ struct scsi_cmnd *sc)
+{
+ u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
+
+ return &fnic->io_req_lock[hash];
+}
+
+/*
+ * Unmap the data buffer and sense buffer for an io_req,
+ * also unmap and free the device-private scatter/gather list.
+ */
+static void fnic_release_ioreq_buf(struct fnic *fnic,
+ struct fnic_io_req *io_req,
+ struct scsi_cmnd *sc)
+{
+ if (io_req->sgl_list_pa)
+ pci_unmap_single(fnic->pdev, io_req->sgl_list_pa,
+ sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt,
+ PCI_DMA_TODEVICE);
+ scsi_dma_unmap(sc);
+
+ if (io_req->sgl_cnt)
+ mempool_free(io_req->sgl_list_alloc,
+ fnic->io_sgl_pool[io_req->sgl_type]);
+ if (io_req->sense_buf_pa)
+ pci_unmap_single(fnic->pdev, io_req->sense_buf_pa,
+ SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
+}
+
+/* Free up Copy Wq descriptors. Called with copy_wq lock held */
+static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq)
+{
+ /* if no Ack received from firmware, then nothing to clean */
+ if (!fnic->fw_ack_recd[0])
+ return 1;
+
+ /*
+ * Update desc_available count based on number of freed descriptors
+ * Account for wraparound
+ */
+ if (wq->to_clean_index <= fnic->fw_ack_index[0])
+ wq->ring.desc_avail += (fnic->fw_ack_index[0]
+ - wq->to_clean_index + 1);
+ else
+ wq->ring.desc_avail += (wq->ring.desc_count
+ - wq->to_clean_index
+ + fnic->fw_ack_index[0] + 1);
+
+ /*
+ * just bump clean index to ack_index+1 accounting for wraparound
+ * this will essentially free up all descriptors between
+ * to_clean_index and fw_ack_index, both inclusive
+ */
+ wq->to_clean_index =
+ (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count;
+
+ /* we have processed the acks received so far */
+ fnic->fw_ack_recd[0] = 0;
+ return 0;
+}
+
+
+/*
+ * fnic_fw_reset_handler
+ * Routine to send reset msg to fw
+ */
+int fnic_fw_reset_handler(struct fnic *fnic)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq))
+ ret = -EAGAIN;
+ else
+ fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+ if (!ret)
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Issued fw reset\n");
+ else
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Failed to issue fw reset\n");
+ return ret;
+}
+
+
+/*
+ * fnic_flogi_reg_handler
+ * Routine to send flogi register msg to fw
+ */
+int fnic_flogi_reg_handler(struct fnic *fnic)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ u8 gw_mac[ETH_ALEN];
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ ret = -EAGAIN;
+ goto flogi_reg_ioreq_end;
+ }
+
+ if (fnic->fcoui_mode)
+ memset(gw_mac, 0xff, ETH_ALEN);
+ else
+ memcpy(gw_mac, fnic->dest_addr, ETH_ALEN);
+
+ fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG,
+ FCPIO_FLOGI_REG_GW_DEST,
+ fnic->s_id,
+ gw_mac);
+
+flogi_reg_ioreq_end:
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+ if (!ret)
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "flog reg issued\n");
+
+ return ret;
+}
+
+/*
+ * fnic_queue_wq_copy_desc
+ * Routine to enqueue a wq copy desc
+ */
+static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
+ struct vnic_wq_copy *wq,
+ struct fnic_io_req *io_req,
+ struct scsi_cmnd *sc,
+ u32 sg_count)
+{
+ struct scatterlist *sg;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+ struct fc_rport_libfc_priv *rp = rport->dd_data;
+ struct host_sg_desc *desc;
+ u8 pri_tag = 0;
+ unsigned int i;
+ unsigned long intr_flags;
+ int flags;
+ u8 exch_flags;
+ struct scsi_lun fc_lun;
+ char msg[2];
+
+ if (sg_count) {
+ BUG_ON(sg_count < 0);
+ BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
+
+ /* For each SGE, create a device desc entry */
+ desc = io_req->sgl_list;
+ for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
+ desc->addr = cpu_to_le64(sg_dma_address(sg));
+ desc->len = cpu_to_le32(sg_dma_len(sg));
+ desc->_resvd = 0;
+ desc++;
+ }
+
+ io_req->sgl_list_pa = pci_map_single
+ (fnic->pdev,
+ io_req->sgl_list,
+ sizeof(io_req->sgl_list[0]) * sg_count,
+ PCI_DMA_TODEVICE);
+ }
+
+ io_req->sense_buf_pa = pci_map_single(fnic->pdev,
+ sc->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE,
+ PCI_DMA_FROMDEVICE);
+
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ pri_tag = FCPIO_ICMND_PTA_SIMPLE;
+ msg[0] = MSG_SIMPLE_TAG;
+ scsi_populate_tag_msg(sc, msg);
+ if (msg[0] == MSG_ORDERED_TAG)
+ pri_tag = FCPIO_ICMND_PTA_ORDERED;
+
+ /* Enqueue the descriptor in the Copy WQ */
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (unlikely(!vnic_wq_copy_desc_avail(wq))) {
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ flags = 0;
+ if (sc->sc_data_direction == DMA_FROM_DEVICE)
+ flags = FCPIO_ICMND_RDDATA;
+ else if (sc->sc_data_direction == DMA_TO_DEVICE)
+ flags = FCPIO_ICMND_WRDATA;
+
+ exch_flags = 0;
+ if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) &&
+ (rp->flags & FC_RP_FLAGS_RETRY))
+ exch_flags |= FCPIO_ICMND_SRFLAG_RETRY;
+
+ fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag,
+ 0, exch_flags, io_req->sgl_cnt,
+ SCSI_SENSE_BUFFERSIZE,
+ io_req->sgl_list_pa,
+ io_req->sense_buf_pa,
+ 0, /* scsi cmd ref, always 0 */
+ pri_tag, /* scsi pri and tag */
+ flags, /* command flags */
+ sc->cmnd, scsi_bufflen(sc),
+ fc_lun.scsi_lun, io_req->port_id,
+ rport->maxframe_size, rp->r_a_tov,
+ rp->e_d_tov);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ return 0;
+}
+
+/*
+ * fnic_queuecommand
+ * Routine to send a scsi cdb
+ * Called with host_lock held and interrupts disabled.
+ */
+int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+{
+ struct fc_lport *lp;
+ struct fc_rport *rport;
+ struct fnic_io_req *io_req;
+ struct fnic *fnic;
+ struct vnic_wq_copy *wq;
+ int ret;
+ u32 sg_count;
+ unsigned long flags;
+ unsigned long ptr;
+
+ rport = starget_to_rport(scsi_target(sc->device));
+ ret = fc_remote_port_chkready(rport);
+ if (ret) {
+ sc->result = ret;
+ done(sc);
+ return 0;
+ }
+
+ lp = shost_priv(sc->device->host);
+ if (lp->state != LPORT_ST_READY || !(lp->link_up))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Release host lock, use driver resource specific locks from here.
+ * Don't re-enable interrupts in case they were disabled prior to the
+ * caller disabling them.
+ */
+ spin_unlock(lp->host->host_lock);
+
+ /* Get a new io_req for this SCSI IO */
+ fnic = lport_priv(lp);
+
+ io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+ if (!io_req) {
+ ret = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+ memset(io_req, 0, sizeof(*io_req));
+
+ /* Map the data buffer */
+ sg_count = scsi_dma_map(sc);
+ if (sg_count < 0) {
+ mempool_free(io_req, fnic->io_req_pool);
+ goto out;
+ }
+
+ /* Determine the type of scatter/gather list we need */
+ io_req->sgl_cnt = sg_count;
+ io_req->sgl_type = FNIC_SGL_CACHE_DFLT;
+ if (sg_count > FNIC_DFLT_SG_DESC_CNT)
+ io_req->sgl_type = FNIC_SGL_CACHE_MAX;
+
+ if (sg_count) {
+ io_req->sgl_list =
+ mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type],
+ GFP_ATOMIC | GFP_DMA);
+ if (!io_req->sgl_list) {
+ ret = SCSI_MLQUEUE_HOST_BUSY;
+ scsi_dma_unmap(sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ goto out;
+ }
+
+ /* Cache sgl list allocated address before alignment */
+ io_req->sgl_list_alloc = io_req->sgl_list;
+ ptr = (unsigned long) io_req->sgl_list;
+ if (ptr % FNIC_SG_DESC_ALIGN) {
+ io_req->sgl_list = (struct host_sg_desc *)
+ (((unsigned long) ptr
+ + FNIC_SG_DESC_ALIGN - 1)
+ & ~(FNIC_SG_DESC_ALIGN - 1));
+ }
+ }
+
+ /* initialize rest of io_req */
+ io_req->port_id = rport->port_id;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+ CMD_SP(sc) = (char *)io_req;
+ sc->scsi_done = done;
+
+ /* create copy wq desc and enqueue it */
+ wq = &fnic->wq_copy[0];
+ ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count);
+ if (ret) {
+ /*
+ * In case another thread cancelled the request,
+ * refetch the pointer under the lock.
+ */
+ spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ CMD_SP(sc) = NULL;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ spin_unlock_irqrestore(io_lock, flags);
+ if (io_req) {
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+ }
+out:
+ /* acquire host lock before returning to SCSI */
+ spin_lock(lp->host->host_lock);
+ return ret;
+}
+
+/*
+ * fnic_fcpio_fw_reset_cmpl_handler
+ * Routine to handle fw reset completion
+ */
+static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ int ret = 0;
+ struct fc_frame *flogi;
+ unsigned long flags;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+ /* Clean up all outstanding io requests */
+ fnic_cleanup_io(fnic, SCSI_NO_TAG);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ flogi = fnic->flogi;
+ fnic->flogi = NULL;
+
+ /* fnic should be in FC_TRANS_ETH_MODE */
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) {
+ /* Check status of reset completion */
+ if (!hdr_status) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "reset cmpl success\n");
+ /* Ready to send flogi out */
+ fnic->state = FNIC_IN_ETH_MODE;
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic fw_reset : failed %s\n",
+ fnic_fcpio_status_to_str(hdr_status));
+
+ /*
+ * Unable to change to eth mode, cannot send out flogi
+ * Change state to fc mode, so that subsequent Flogi
+ * requests from libFC will cause more attempts to
+ * reset the firmware. Free the cached flogi
+ */
+ fnic->state = FNIC_IN_FC_MODE;
+ ret = -1;
+ }
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Unexpected state %s while processing"
+ " reset cmpl\n", fnic_state_to_str(fnic->state));
+ ret = -1;
+ }
+
+ /* Thread removing device blocks till firmware reset is complete */
+ if (fnic->remove_wait)
+ complete(fnic->remove_wait);
+
+ /*
+ * If fnic is being removed, or fw reset failed
+ * free the flogi frame. Else, send it out
+ */
+ if (fnic->remove_wait || ret) {
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (flogi)
+ dev_kfree_skb_irq(fp_skb(flogi));
+ goto reset_cmpl_handler_end;
+ }
+
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (flogi)
+ ret = fnic_send_frame(fnic, flogi);
+
+ reset_cmpl_handler_end:
+ return ret;
+}
+
+/*
+ * fnic_fcpio_flogi_reg_cmpl_handler
+ * Routine to handle flogi register completion
+ */
+static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ int ret = 0;
+ struct fc_frame *flogi_resp = NULL;
+ unsigned long flags;
+ struct sk_buff *skb;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+ /* Update fnic state based on status of flogi reg completion */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+
+ if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) {
+
+ /* Check flogi registration completion status */
+ if (!hdr_status) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "flog reg succeeded\n");
+ fnic->state = FNIC_IN_FC_MODE;
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic flogi reg :failed %s\n",
+ fnic_fcpio_status_to_str(hdr_status));
+ fnic->state = FNIC_IN_ETH_MODE;
+ ret = -1;
+ }
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Unexpected fnic state %s while"
+ " processing flogi reg completion\n",
+ fnic_state_to_str(fnic->state));
+ ret = -1;
+ }
+
+ /* Successful flogi reg cmpl, pass frame to LibFC */
+ if (!ret && flogi_resp) {
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ goto reg_cmpl_handler_end;
+ }
+ skb = (struct sk_buff *)flogi_resp;
+ /* Use fr_flags to indicate whether flogi resp or not */
+ fr_flags(flogi_resp) = 1;
+ fr_dev(flogi_resp) = fnic->lport;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ skb_queue_tail(&fnic->frame_queue, skb);
+ queue_work(fnic_event_queue, &fnic->frame_work);
+
+ } else {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (flogi_resp)
+ dev_kfree_skb_irq(fp_skb(flogi_resp));
+ }
+
+reg_cmpl_handler_end:
+ return ret;
+}
+
+static inline int is_ack_index_in_range(struct vnic_wq_copy *wq,
+ u16 request_out)
+{
+ if (wq->to_clean_index <= wq->to_use_index) {
+ /* out of range, stale request_out index */
+ if (request_out < wq->to_clean_index ||
+ request_out >= wq->to_use_index)
+ return 0;
+ } else {
+ /* out of range, stale request_out index */
+ if (request_out < wq->to_clean_index &&
+ request_out >= wq->to_use_index)
+ return 0;
+ }
+ /* request_out index is in range */
+ return 1;
+}
+
+
+/*
+ * Mark that ack received and store the Ack index. If there are multiple
+ * acks received before Tx thread cleans it up, the latest value will be
+ * used which is correct behavior. This state should be in the copy Wq
+ * instead of in the fnic
+ */
+static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
+ unsigned int cq_index,
+ struct fcpio_fw_req *desc)
+{
+ struct vnic_wq_copy *wq;
+ u16 request_out = desc->u.ack.request_out;
+ unsigned long flags;
+
+ /* mark the ack state */
+ wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count];
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (is_ack_index_in_range(wq, request_out)) {
+ fnic->fw_ack_index[0] = request_out;
+ fnic->fw_ack_recd[0] = 1;
+ }
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+}
+
+/*
+ * fnic_fcpio_icmnd_cmpl_handler
+ * Routine to handle icmnd completions
+ */
+static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ u32 id;
+ u64 xfer_len = 0;
+ struct fcpio_icmnd_cmpl *icmnd_cmpl;
+ struct fnic_io_req *io_req;
+ struct scsi_cmnd *sc;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ /* Decode the cmpl description to get the io_req id */
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+ fcpio_tag_id_dec(&tag, &id);
+
+ if (id >= FNIC_MAX_IO_REQ)
+ return;
+
+ sc = scsi_host_find_tag(fnic->lport->host, id);
+ WARN_ON_ONCE(!sc);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ WARN_ON_ONCE(!io_req);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ /* firmware completed the io */
+ io_req->io_completed = 1;
+
+ /*
+ * if SCSI-ML has already issued abort on this command,
+ * ignore completion of the IO. The abts path will clean it up
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ /* Mark the IO as complete */
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+
+ icmnd_cmpl = &desc->u.icmnd_cmpl;
+
+ switch (hdr_status) {
+ case FCPIO_SUCCESS:
+ sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status;
+ xfer_len = scsi_bufflen(sc);
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+
+ if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER)
+ xfer_len -= icmnd_cmpl->residual;
+
+ /*
+ * If queue_full, then try to reduce queue depth for all
+ * LUNS on the target. Todo: this should be accompanied
+ * by a periodic queue_depth rampup based on successful
+ * IO completion.
+ */
+ if (icmnd_cmpl->scsi_status == QUEUE_FULL) {
+ struct scsi_device *t_sdev;
+ int qd = 0;
+
+ shost_for_each_device(t_sdev, sc->device->host) {
+ if (t_sdev->id != sc->device->id)
+ continue;
+
+ if (t_sdev->queue_depth > 1) {
+ qd = scsi_track_queue_full
+ (t_sdev,
+ t_sdev->queue_depth - 1);
+ if (qd == -1)
+ qd = t_sdev->host->cmd_per_lun;
+ shost_printk(KERN_INFO,
+ fnic->lport->host,
+ "scsi[%d:%d:%d:%d"
+ "] queue full detected,"
+ "new depth = %d\n",
+ t_sdev->host->host_no,
+ t_sdev->channel,
+ t_sdev->id, t_sdev->lun,
+ t_sdev->queue_depth);
+ }
+ }
+ }
+ break;
+
+ case FCPIO_TIMEOUT: /* request was timed out */
+ sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_ABORTED: /* request was aborted */
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */
+ sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status;
+ break;
+ case FCPIO_INVALID_HEADER: /* header contains invalid data */
+ case FCPIO_INVALID_PARAM: /* some parameter in request invalid */
+ case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */
+ case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */
+ case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */
+ case FCPIO_MSS_INVALID: /* request was aborted due to mss error */
+ case FCPIO_FW_ERR: /* request was terminated due fw error */
+ default:
+ shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n",
+ fnic_fcpio_status_to_str(hdr_status));
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+ }
+
+ /* Break link with the SCSI command */
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+
+ mempool_free(io_req, fnic->io_req_pool);
+
+ if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+ fnic->lport->host_stats.fcp_input_requests++;
+ fnic->fcp_input_bytes += xfer_len;
+ } else if (sc->sc_data_direction == DMA_TO_DEVICE) {
+ fnic->lport->host_stats.fcp_output_requests++;
+ fnic->fcp_output_bytes += xfer_len;
+ } else
+ fnic->lport->host_stats.fcp_control_requests++;
+
+ /* Call SCSI completion function to complete the IO */
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+
+}
+
+/* fnic_fcpio_itmf_cmpl_handler
+ * Routine to handle itmf completions
+ */
+static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ u32 id;
+ struct scsi_cmnd *sc;
+ struct fnic_io_req *io_req;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+ fcpio_tag_id_dec(&tag, &id);
+
+ if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ)
+ return;
+
+ sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK);
+ WARN_ON_ONCE(!sc);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ WARN_ON_ONCE(!io_req);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ if (id & FNIC_TAG_ABORT) {
+ /* Completion of abort cmd */
+ if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) {
+ /* This is a late completion. Ignore it */
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
+ CMD_ABTS_STATUS(sc) = hdr_status;
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "abts cmpl recd. id %d status %s\n",
+ (int)(id & FNIC_TAG_MASK),
+ fnic_fcpio_status_to_str(hdr_status));
+
+ /*
+ * If scsi_eh thread is blocked waiting for abts to complete,
+ * signal completion to it. IO will be cleaned in the thread
+ * else clean it in this context
+ */
+ if (io_req->abts_done) {
+ complete(io_req->abts_done);
+ spin_unlock_irqrestore(io_lock, flags);
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "abts cmpl, completing IO\n");
+ CMD_SP(sc) = NULL;
+ sc->result = (DID_ERROR << 16);
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+ }
+
+ } else if (id & FNIC_TAG_DEV_RST) {
+ /* Completion of device reset */
+ CMD_LR_STATUS(sc) = hdr_status;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "dev reset cmpl recd. id %d status %s\n",
+ (int)(id & FNIC_TAG_MASK),
+ fnic_fcpio_status_to_str(hdr_status));
+ if (io_req->dr_done)
+ complete(io_req->dr_done);
+ spin_unlock_irqrestore(io_lock, flags);
+
+ } else {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unexpected itmf io state %s tag %x\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)), id);
+ spin_unlock_irqrestore(io_lock, flags);
+ }
+
+}
+
+/*
+ * fnic_fcpio_cmpl_handler
+ * Routine to service the cq for wq_copy
+ */
+static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
+ unsigned int cq_index,
+ struct fcpio_fw_req *desc)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+ int ret = 0;
+
+ switch (desc->hdr.type) {
+ case FCPIO_ACK: /* fw copied copy wq desc to its queue */
+ fnic_fcpio_ack_handler(fnic, cq_index, desc);
+ break;
+
+ case FCPIO_ICMND_CMPL: /* fw completed a command */
+ fnic_fcpio_icmnd_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/
+ fnic_fcpio_itmf_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
+ ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_RESET_CMPL: /* fw completed reset */
+ ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
+ break;
+
+ default:
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "firmware completion type %d\n",
+ desc->hdr.type);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * fnic_wq_copy_cmpl_handler
+ * Routine to process wq copy
+ */
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
+{
+ unsigned int wq_work_done = 0;
+ unsigned int i, cq_index;
+ unsigned int cur_work_done;
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ cq_index = i + fnic->raw_wq_count + fnic->rq_count;
+ cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index],
+ fnic_fcpio_cmpl_handler,
+ copy_work_to_do);
+ wq_work_done += cur_work_done;
+ }
+ return wq_work_done;
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
+{
+ unsigned int i;
+ struct fnic_io_req *io_req;
+ unsigned long flags = 0;
+ struct scsi_cmnd *sc;
+ spinlock_t *io_lock;
+
+ for (i = 0; i < FNIC_MAX_IO_REQ; i++) {
+ if (i == exclude_id)
+ continue;
+
+ sc = scsi_host_find_tag(fnic->lport->host, i);
+ if (!sc)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto cleanup_scsi_cmd;
+ }
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /*
+ * If there is a scsi_cmnd associated with this io_req, then
+ * free the corresponding state
+ */
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+cleanup_scsi_cmd:
+ sc->result = DID_TRANSPORT_DISRUPTED << 16;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:"
+ " DID_TRANSPORT_DISRUPTED\n");
+
+ /* Complete the command to SCSI */
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+ }
+}
+
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *desc)
+{
+ u32 id;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+ struct fnic_io_req *io_req;
+ struct scsi_cmnd *sc;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ /* get the tag reference */
+ fcpio_tag_id_dec(&desc->hdr.tag, &id);
+ id &= FNIC_TAG_MASK;
+
+ if (id >= FNIC_MAX_IO_REQ)
+ return;
+
+ sc = scsi_host_find_tag(fnic->lport->host, id);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ /* Get the IO context which this desc refers to */
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ /* fnic interrupts are turned off by now */
+
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto wq_copy_cleanup_scsi_cmd;
+ }
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+wq_copy_cleanup_scsi_cmd:
+ sc->result = DID_NO_CONNECT << 16;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:"
+ " DID_NO_CONNECT\n");
+
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+}
+
+static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
+ u32 task_req, u8 *fc_lun,
+ struct fnic_io_req *io_req)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ return 1;
+ }
+ fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT,
+ 0, task_req, tag, fc_lun, io_req->port_id,
+ fnic->config.ra_tov, fnic->config.ed_tov);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ return 0;
+}
+
+void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ struct scsi_cmnd *sc;
+ struct scsi_lun fc_lun;
+ enum fnic_ioreq_state old_ioreq_state;
+
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic_rport_reset_exch called portid 0x%06x\n",
+ port_id);
+
+ if (fnic->in_remove)
+ return;
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ if (!sc)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || io_req->port_id != port_id) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to rport that went away
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+ old_ioreq_state = CMD_STATE(sc);
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+ BUG_ON(io_req->abts_done);
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_rport_reset_exch: Issuing abts\n");
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ /*
+ * Revert the cmd state back to old state, if
+ * it hasnt changed in between. This cmd will get
+ * aborted later by scsi_eh, or cleaned up during
+ * lun reset
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+ CMD_STATE(sc) = old_ioreq_state;
+ spin_unlock_irqrestore(io_lock, flags);
+ }
+ }
+
+}
+
+void fnic_terminate_rport_io(struct fc_rport *rport)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ struct scsi_cmnd *sc;
+ struct scsi_lun fc_lun;
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ struct fc_lport *lport = rdata->local_port;
+ struct fnic *fnic = lport_priv(lport);
+ struct fc_rport *cmd_rport;
+ enum fnic_ioreq_state old_ioreq_state;
+
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host, "fnic_terminate_rport_io called"
+ " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n",
+ rport->port_name, rport->node_name,
+ rport->port_id);
+
+ if (fnic->in_remove)
+ return;
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ if (!sc)
+ continue;
+
+ cmd_rport = starget_to_rport(scsi_target(sc->device));
+ if (rport != cmd_rport)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || rport != cmd_rport) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to rport that went away
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+ old_ioreq_state = CMD_STATE(sc);
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+ BUG_ON(io_req->abts_done);
+
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic_terminate_rport_io: Issuing abts\n");
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ /*
+ * Revert the cmd state back to old state, if
+ * it hasnt changed in between. This cmd will get
+ * aborted later by scsi_eh, or cleaned up during
+ * lun reset
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+ CMD_STATE(sc) = old_ioreq_state;
+ spin_unlock_irqrestore(io_lock, flags);
+ }
+ }
+
+}
+
+static void fnic_block_error_handler(struct scsi_cmnd *sc)
+{
+ struct Scsi_Host *shost = sc->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ msleep(1000);
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+}
+
+/*
+ * This function is exported to SCSI for sending abort cmnds.
+ * A SCSI IO is represented by a io_req in the driver.
+ * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO.
+ */
+int fnic_abort_cmd(struct scsi_cmnd *sc)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ struct fnic_io_req *io_req;
+ struct fc_rport *rport;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = SUCCESS;
+ u32 task_req;
+ struct scsi_lun fc_lun;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ /* Wait for rport to unblock */
+ fnic_block_error_handler(sc);
+
+ /* Get local-port, check ready and link up */
+ lp = shost_priv(sc->device->host);
+
+ fnic = lport_priv(lp);
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
+ (starget_to_rport(scsi_target(sc->device)))->port_id,
+ sc->device->lun, sc->request->tag);
+
+ if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * Avoid a race between SCSI issuing the abort and the device
+ * completing the command.
+ *
+ * If the command is already completed by the fw cmpl code,
+ * we just return SUCCESS from here. This means that the abort
+ * succeeded. In the SCSI ML, since the timeout for command has
+ * happened, the completion wont actually complete the command
+ * and it will be considered as an aborted command
+ *
+ * The CMD_SP will not be cleared except while holding io_req_lock.
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_abort_cmd_end;
+ }
+
+ io_req->abts_done = &tm_done;
+
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto wait_pending;
+ }
+ /*
+ * Command is still pending, need to abort it
+ * If the firmware completes the command after this point,
+ * the completion wont be done till mid-layer, since abort
+ * has already started.
+ */
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /*
+ * Check readiness of the remote port. If the path to remote
+ * port is up, then send abts to the remote port to terminate
+ * the IO. Else, just locally terminate the IO in the firmware
+ */
+ rport = starget_to_rport(scsi_target(sc->device));
+ if (fc_remote_port_chkready(rport) == 0)
+ task_req = FCPIO_ITMF_ABT_TASK;
+ else
+ task_req = FCPIO_ITMF_ABT_TASK_TERM;
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
+ fc_lun.scsi_lun, io_req)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->abts_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * We queued an abort IO, wait for its completion.
+ * Once the firmware completes the abort command, it will
+ * wake up this thread.
+ */
+ wait_pending:
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies
+ (2 * fnic->config.ra_tov +
+ fnic->config.ed_tov));
+
+ /* Check the abort status */
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+ io_req->abts_done = NULL;
+
+ /* fw did not complete abort, timed out */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * firmware completed the abort, check the status,
+ * free the io_req irrespective of failure or success
+ */
+ if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
+ ret = FAILED;
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+fnic_abort_cmd_end:
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Returning from abort cmd %s\n",
+ (ret == SUCCESS) ?
+ "SUCCESS" : "FAILED");
+ return ret;
+}
+
+static inline int fnic_queue_dr_io_req(struct fnic *fnic,
+ struct scsi_cmnd *sc,
+ struct fnic_io_req *io_req)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ struct scsi_lun fc_lun;
+ int ret = 0;
+ unsigned long intr_flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ ret = -EAGAIN;
+ goto lr_io_req_end;
+ }
+
+ /* fill in the lun info */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST,
+ 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG,
+ fc_lun.scsi_lun, io_req->port_id,
+ fnic->config.ra_tov, fnic->config.ed_tov);
+
+lr_io_req_end:
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+
+ return ret;
+}
+
+/*
+ * Clean up any pending aborts on the lun
+ * For each outstanding IO on this lun, whose abort is not completed by fw,
+ * issue a local abort. Wait for abort to complete. Return 0 if all commands
+ * successfully aborted, 1 otherwise
+ */
+static int fnic_clean_pending_aborts(struct fnic *fnic,
+ struct scsi_cmnd *lr_sc)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = 0;
+ struct scsi_cmnd *sc;
+ struct fc_rport *rport;
+ struct scsi_lun fc_lun;
+ struct scsi_device *lun_dev = lr_sc->device;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ /*
+ * ignore this lun reset cmd or cmds that do not belong to
+ * this lun
+ */
+ if (!sc || sc == lr_sc || sc->device != lun_dev)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || sc->device != lun_dev) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to the LUN that we are resetting
+ */
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Found IO in %s on lun\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)));
+
+ BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING);
+
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+ io_req->abts_done = &tm_done;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+ rport = starget_to_rport(scsi_target(sc->device));
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->abts_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies
+ (fnic->config.ed_tov));
+
+ /* Recheck cmd state to check if it is now aborted */
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+
+ io_req->abts_done = NULL;
+
+ /* if abort is still pending with fw, fail */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+ CMD_SP(sc) = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+
+clean_pending_aborts_end:
+ return ret;
+}
+
+/*
+ * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN
+ * fail to get aborted. It calls driver's eh_device_reset with a SCSI command
+ * on the LUN.
+ */
+int fnic_device_reset(struct scsi_cmnd *sc)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ struct fnic_io_req *io_req;
+ struct fc_rport *rport;
+ int status;
+ int ret = FAILED;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ /* Wait for rport to unblock */
+ fnic_block_error_handler(sc);
+
+ /* Get local-port, check ready and link up */
+ lp = shost_priv(sc->device->host);
+
+ fnic = lport_priv(lp);
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Device reset called FCID 0x%x, LUN 0x%x\n",
+ (starget_to_rport(scsi_target(sc->device)))->port_id,
+ sc->device->lun);
+
+
+ if (lp->state != LPORT_ST_READY || !(lp->link_up))
+ goto fnic_device_reset_end;
+
+ /* Check if remote port up */
+ rport = starget_to_rport(scsi_target(sc->device));
+ if (fc_remote_port_chkready(rport))
+ goto fnic_device_reset_end;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ /*
+ * If there is a io_req attached to this command, then use it,
+ * else allocate a new one.
+ */
+ if (!io_req) {
+ io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+ memset(io_req, 0, sizeof(*io_req));
+ io_req->port_id = rport->port_id;
+ CMD_SP(sc) = (char *)io_req;
+ }
+ io_req->dr_done = &tm_done;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+ CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n",
+ sc->request->tag);
+
+ /*
+ * issue the device reset, if enqueue failed, clean up the ioreq
+ * and break assoc with scsi cmd
+ */
+ if (fnic_queue_dr_io_req(fnic, sc, io_req)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->dr_done = NULL;
+ goto fnic_device_reset_clean;
+ }
+
+ /*
+ * Wait on the local completion for LUN reset. The io_req may be
+ * freed while we wait since we hold no lock.
+ */
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT));
+
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+ io_req->dr_done = NULL;
+
+ status = CMD_LR_STATUS(sc);
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /*
+ * If lun reset not completed, bail out with failed. io_req
+ * gets cleaned up during higher levels of EH
+ */
+ if (status == FCPIO_INVALID_CODE) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Device reset timed out\n");
+ goto fnic_device_reset_end;
+ }
+
+ /* Completed, but not successful, clean up the io_req, return fail */
+ if (status != FCPIO_SUCCESS) {
+ spin_lock_irqsave(io_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Device reset completed - failed\n");
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ goto fnic_device_reset_clean;
+ }
+
+ /*
+ * Clean up any aborts on this lun that have still not
+ * completed. If any of these fail, then LUN reset fails.
+ * clean_pending_aborts cleans all cmds on this lun except
+ * the lun reset cmd. If all cmds get cleaned, the lun reset
+ * succeeds
+ */
+ if (fnic_clean_pending_aborts(fnic, sc)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Device reset failed"
+ " since could not abort all IOs\n");
+ goto fnic_device_reset_clean;
+ }
+
+ /* Clean lun reset command */
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ /* Completed, and successful */
+ ret = SUCCESS;
+
+fnic_device_reset_clean:
+ if (io_req)
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ if (io_req) {
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+
+fnic_device_reset_end:
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Returning from device reset %s\n",
+ (ret == SUCCESS) ?
+ "SUCCESS" : "FAILED");
+ return ret;
+}
+
+/* Clean up all IOs, clean up libFC local port */
+int fnic_reset(struct Scsi_Host *shost)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ int ret = SUCCESS;
+
+ lp = shost_priv(shost);
+ fnic = lport_priv(lp);
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_reset called\n");
+
+ /*
+ * Reset local port, this will clean up libFC exchanges,
+ * reset remote port sessions, and if link is up, begin flogi
+ */
+ if (lp->tt.lport_reset(lp))
+ ret = FAILED;
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Returning from fnic reset %s\n",
+ (ret == SUCCESS) ?
+ "SUCCESS" : "FAILED");
+
+ return ret;
+}
+
+/*
+ * SCSI Error handling calls driver's eh_host_reset if all prior
+ * error handling levels return FAILED. If host reset completes
+ * successfully, and if link is up, then Fabric login begins.
+ *
+ * Host Reset is the highest level of error recovery. If this fails, then
+ * host is offlined by SCSI.
+ *
+ */
+int fnic_host_reset(struct scsi_cmnd *sc)
+{
+ int ret;
+ unsigned long wait_host_tmo;
+ struct Scsi_Host *shost = sc->device->host;
+ struct fc_lport *lp = shost_priv(shost);
+
+ /*
+ * If fnic_reset is successful, wait for fabric login to complete
+ * scsi-ml tries to send a TUR to every device if host reset is
+ * successful, so before returning to scsi, fabric should be up
+ */
+ ret = fnic_reset(shost);
+ if (ret == SUCCESS) {
+ wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ;
+ ret = FAILED;
+ while (time_before(jiffies, wait_host_tmo)) {
+ if ((lp->state == LPORT_ST_READY) &&
+ (lp->link_up)) {
+ ret = SUCCESS;
+ break;
+ }
+ ssleep(1);
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * This fxn is called from libFC when host is removed
+ */
+void fnic_scsi_abort_io(struct fc_lport *lp)
+{
+ int err = 0;
+ unsigned long flags;
+ enum fnic_state old_state;
+ struct fnic *fnic = lport_priv(lp);
+ DECLARE_COMPLETION_ONSTACK(remove_wait);
+
+ /* Issue firmware reset for fnic, wait for reset to complete */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->remove_wait = &remove_wait;
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ err = fnic_fw_reset_handler(fnic);
+ if (err) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ fnic->remove_wait = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
+ }
+
+ /* Wait for firmware reset to complete */
+ wait_for_completion_timeout(&remove_wait,
+ msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT));
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->remove_wait = NULL;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_scsi_abort_io %s\n",
+ (fnic->state == FNIC_IN_ETH_MODE) ?
+ "SUCCESS" : "FAILED");
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+}
+
+/*
+ * This fxn called from libFC to clean up driver IO state on link down
+ */
+void fnic_scsi_cleanup(struct fc_lport *lp)
+{
+ unsigned long flags;
+ enum fnic_state old_state;
+ struct fnic *fnic = lport_priv(lp);
+
+ /* issue fw reset */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (fnic_fw_reset_handler(fnic)) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ }
+
+}
+
+void fnic_empty_scsi_cleanup(struct fc_lport *lp)
+{
+}
+
+void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
+{
+ struct fnic *fnic = lport_priv(lp);
+
+ /* Non-zero sid, nothing to do */
+ if (sid)
+ goto call_fc_exch_mgr_reset;
+
+ if (did) {
+ fnic_rport_exch_reset(fnic, did);
+ goto call_fc_exch_mgr_reset;
+ }
+
+ /*
+ * sid = 0, did = 0
+ * link down or device being removed
+ */
+ if (!fnic->in_remove)
+ fnic_scsi_cleanup(lp);
+ else
+ fnic_scsi_abort_io(lp);
+
+ /* call libFC exch mgr reset to reset its exchanges */
+call_fc_exch_mgr_reset:
+ fc_exch_mgr_reset(lp, sid, did);
+
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _RQ_ENET_DESC_H_
+#define _RQ_ENET_DESC_H_
+
+/* Ethernet receive queue descriptor: 16B */
+struct rq_enet_desc {
+ __le64 address;
+ __le16 length_type;
+ u8 reserved[6];
+};
+
+enum rq_enet_type_types {
+ RQ_ENET_TYPE_ONLY_SOP = 0,
+ RQ_ENET_TYPE_NOT_SOP = 1,
+ RQ_ENET_TYPE_RESV2 = 2,
+ RQ_ENET_TYPE_RESV3 = 3,
+};
+
+#define RQ_ENET_ADDR_BITS 64
+#define RQ_ENET_LEN_BITS 14
+#define RQ_ENET_LEN_MASK ((1 << RQ_ENET_LEN_BITS) - 1)
+#define RQ_ENET_TYPE_BITS 2
+#define RQ_ENET_TYPE_MASK ((1 << RQ_ENET_TYPE_BITS) - 1)
+
+static inline void rq_enet_desc_enc(struct rq_enet_desc *desc,
+ u64 address, u8 type, u16 length)
+{
+ desc->address = cpu_to_le64(address);
+ desc->length_type = cpu_to_le16((length & RQ_ENET_LEN_MASK) |
+ ((type & RQ_ENET_TYPE_MASK) << RQ_ENET_LEN_BITS));
+}
+
+static inline void rq_enet_desc_dec(struct rq_enet_desc *desc,
+ u64 *address, u8 *type, u16 *length)
+{
+ *address = le64_to_cpu(desc->address);
+ *length = le16_to_cpu(desc->length_type) & RQ_ENET_LEN_MASK;
+ *type = (u8)((le16_to_cpu(desc->length_type) >> RQ_ENET_LEN_BITS) &
+ RQ_ENET_TYPE_MASK);
+}
+
+#endif /* _RQ_ENET_DESC_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+void vnic_cq_free(struct vnic_cq *cq)
+{
+ vnic_dev_free_desc_ring(cq->vdev, &cq->ring);
+
+ cq->ctrl = NULL;
+}
+
+int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ int err;
+
+ cq->index = index;
+ cq->vdev = vdev;
+
+ cq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_CQ, index);
+ if (!cq->ctrl) {
+ printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ err = vnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
+ unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
+ unsigned int cq_tail_color, unsigned int interrupt_enable,
+ unsigned int cq_entry_enable, unsigned int cq_message_enable,
+ unsigned int interrupt_offset, u64 cq_message_addr)
+{
+ u64 paddr;
+
+ paddr = (u64)cq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &cq->ctrl->ring_base);
+ iowrite32(cq->ring.desc_count, &cq->ctrl->ring_size);
+ iowrite32(flow_control_enable, &cq->ctrl->flow_control_enable);
+ iowrite32(color_enable, &cq->ctrl->color_enable);
+ iowrite32(cq_head, &cq->ctrl->cq_head);
+ iowrite32(cq_tail, &cq->ctrl->cq_tail);
+ iowrite32(cq_tail_color, &cq->ctrl->cq_tail_color);
+ iowrite32(interrupt_enable, &cq->ctrl->interrupt_enable);
+ iowrite32(cq_entry_enable, &cq->ctrl->cq_entry_enable);
+ iowrite32(cq_message_enable, &cq->ctrl->cq_message_enable);
+ iowrite32(interrupt_offset, &cq->ctrl->interrupt_offset);
+ writeq(cq_message_addr, &cq->ctrl->cq_message_addr);
+}
+
+void vnic_cq_clean(struct vnic_cq *cq)
+{
+ cq->to_clean = 0;
+ cq->last_color = 0;
+
+ iowrite32(0, &cq->ctrl->cq_head);
+ iowrite32(0, &cq->ctrl->cq_tail);
+ iowrite32(1, &cq->ctrl->cq_tail_color);
+
+ vnic_dev_clear_desc_ring(&cq->ring);
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_CQ_H_
+#define _VNIC_CQ_H_
+
+#include "cq_desc.h"
+#include "vnic_dev.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_cq_service fnic_cq_service
+#define vnic_cq_free fnic_cq_free
+#define vnic_cq_alloc fnic_cq_alloc
+#define vnic_cq_init fnic_cq_init
+#define vnic_cq_clean fnic_cq_clean
+
+/* Completion queue control */
+struct vnic_cq_ctrl {
+ u64 ring_base; /* 0x00 */
+ u32 ring_size; /* 0x08 */
+ u32 pad0;
+ u32 flow_control_enable; /* 0x10 */
+ u32 pad1;
+ u32 color_enable; /* 0x18 */
+ u32 pad2;
+ u32 cq_head; /* 0x20 */
+ u32 pad3;
+ u32 cq_tail; /* 0x28 */
+ u32 pad4;
+ u32 cq_tail_color; /* 0x30 */
+ u32 pad5;
+ u32 interrupt_enable; /* 0x38 */
+ u32 pad6;
+ u32 cq_entry_enable; /* 0x40 */
+ u32 pad7;
+ u32 cq_message_enable; /* 0x48 */
+ u32 pad8;
+ u32 interrupt_offset; /* 0x50 */
+ u32 pad9;
+ u64 cq_message_addr; /* 0x58 */
+ u32 pad10;
+};
+
+struct vnic_cq {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_cq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ unsigned int to_clean;
+ unsigned int last_color;
+};
+
+static inline unsigned int vnic_cq_service(struct vnic_cq *cq,
+ unsigned int work_to_do,
+ int (*q_service)(struct vnic_dev *vdev, struct cq_desc *cq_desc,
+ u8 type, u16 q_number, u16 completed_index, void *opaque),
+ void *opaque)
+{
+ struct cq_desc *cq_desc;
+ unsigned int work_done = 0;
+ u16 q_number, completed_index;
+ u8 type, color;
+
+ cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ cq_desc_dec(cq_desc, &type, &color,
+ &q_number, &completed_index);
+
+ while (color != cq->last_color) {
+
+ if ((*q_service)(cq->vdev, cq_desc, type,
+ q_number, completed_index, opaque))
+ break;
+
+ cq->to_clean++;
+ if (cq->to_clean == cq->ring.desc_count) {
+ cq->to_clean = 0;
+ cq->last_color = cq->last_color ? 0 : 1;
+ }
+
+ cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ cq_desc_dec(cq_desc, &type, &color,
+ &q_number, &completed_index);
+
+ work_done++;
+ if (work_done >= work_to_do)
+ break;
+ }
+
+ return work_done;
+}
+
+void vnic_cq_free(struct vnic_cq *cq);
+int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
+ unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
+ unsigned int cq_tail_color, unsigned int interrupt_enable,
+ unsigned int cq_entry_enable, unsigned int message_enable,
+ unsigned int interrupt_offset, u64 message_addr);
+void vnic_cq_clean(struct vnic_cq *cq);
+
+#endif /* _VNIC_CQ_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_CQ_COPY_H_
+#define _VNIC_CQ_COPY_H_
+
+#include "fcpio.h"
+
+static inline unsigned int vnic_cq_copy_service(
+ struct vnic_cq *cq,
+ int (*q_service)(struct vnic_dev *vdev,
+ unsigned int index,
+ struct fcpio_fw_req *desc),
+ unsigned int work_to_do)
+
+{
+ struct fcpio_fw_req *desc;
+ unsigned int work_done = 0;
+ u8 color;
+
+ desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ fcpio_color_dec(desc, &color);
+
+ while (color != cq->last_color) {
+
+ if ((*q_service)(cq->vdev, cq->index, desc))
+ break;
+
+ cq->to_clean++;
+ if (cq->to_clean == cq->ring.desc_count) {
+ cq->to_clean = 0;
+ cq->last_color = cq->last_color ? 0 : 1;
+ }
+
+ desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ fcpio_color_dec(desc, &color);
+
+ work_done++;
+ if (work_done >= work_to_do)
+ break;
+ }
+
+ return work_done;
+}
+
+#endif /* _VNIC_CQ_COPY_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+#include "vnic_dev.h"
+#include "vnic_stats.h"
+
+struct vnic_res {
+ void __iomem *vaddr;
+ unsigned int count;
+};
+
+struct vnic_dev {
+ void *priv;
+ struct pci_dev *pdev;
+ struct vnic_res res[RES_TYPE_MAX];
+ enum vnic_dev_intr_mode intr_mode;
+ struct vnic_devcmd __iomem *devcmd;
+ struct vnic_devcmd_notify *notify;
+ struct vnic_devcmd_notify notify_copy;
+ dma_addr_t notify_pa;
+ u32 *linkstatus;
+ dma_addr_t linkstatus_pa;
+ struct vnic_stats *stats;
+ dma_addr_t stats_pa;
+ struct vnic_devcmd_fw_info *fw_info;
+ dma_addr_t fw_info_pa;
+};
+
+#define VNIC_MAX_RES_HDR_SIZE \
+ (sizeof(struct vnic_resource_header) + \
+ sizeof(struct vnic_resource) * RES_TYPE_MAX)
+#define VNIC_RES_STRIDE 128
+
+void *vnic_dev_priv(struct vnic_dev *vdev)
+{
+ return vdev->priv;
+}
+
+static int vnic_dev_discover_res(struct vnic_dev *vdev,
+ struct vnic_dev_bar *bar)
+{
+ struct vnic_resource_header __iomem *rh;
+ struct vnic_resource __iomem *r;
+ u8 type;
+
+ if (bar->len < VNIC_MAX_RES_HDR_SIZE) {
+ printk(KERN_ERR "vNIC BAR0 res hdr length error\n");
+ return -EINVAL;
+ }
+
+ rh = bar->vaddr;
+ if (!rh) {
+ printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n");
+ return -EINVAL;
+ }
+
+ if (ioread32(&rh->magic) != VNIC_RES_MAGIC ||
+ ioread32(&rh->version) != VNIC_RES_VERSION) {
+ printk(KERN_ERR "vNIC BAR0 res magic/version error "
+ "exp (%lx/%lx) curr (%x/%x)\n",
+ VNIC_RES_MAGIC, VNIC_RES_VERSION,
+ ioread32(&rh->magic), ioread32(&rh->version));
+ return -EINVAL;
+ }
+
+ r = (struct vnic_resource __iomem *)(rh + 1);
+
+ while ((type = ioread8(&r->type)) != RES_TYPE_EOL) {
+
+ u8 bar_num = ioread8(&r->bar);
+ u32 bar_offset = ioread32(&r->bar_offset);
+ u32 count = ioread32(&r->count);
+ u32 len;
+
+ r++;
+
+ if (bar_num != 0) /* only mapping in BAR0 resources */
+ continue;
+
+ switch (type) {
+ case RES_TYPE_WQ:
+ case RES_TYPE_RQ:
+ case RES_TYPE_CQ:
+ case RES_TYPE_INTR_CTRL:
+ /* each count is stride bytes long */
+ len = count * VNIC_RES_STRIDE;
+ if (len + bar_offset > bar->len) {
+ printk(KERN_ERR "vNIC BAR0 resource %d "
+ "out-of-bounds, offset 0x%x + "
+ "size 0x%x > bar len 0x%lx\n",
+ type, bar_offset,
+ len,
+ bar->len);
+ return -EINVAL;
+ }
+ break;
+ case RES_TYPE_INTR_PBA_LEGACY:
+ case RES_TYPE_DEVCMD:
+ len = count;
+ break;
+ default:
+ continue;
+ }
+
+ vdev->res[type].count = count;
+ vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset;
+ }
+
+ return 0;
+}
+
+unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev,
+ enum vnic_res_type type)
+{
+ return vdev->res[type].count;
+}
+
+void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
+ unsigned int index)
+{
+ if (!vdev->res[type].vaddr)
+ return NULL;
+
+ switch (type) {
+ case RES_TYPE_WQ:
+ case RES_TYPE_RQ:
+ case RES_TYPE_CQ:
+ case RES_TYPE_INTR_CTRL:
+ return (char __iomem *)vdev->res[type].vaddr +
+ index * VNIC_RES_STRIDE;
+ default:
+ return (char __iomem *)vdev->res[type].vaddr;
+ }
+}
+
+unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
+ unsigned int desc_count,
+ unsigned int desc_size)
+{
+ /* The base address of the desc rings must be 512 byte aligned.
+ * Descriptor count is aligned to groups of 32 descriptors. A
+ * count of 0 means the maximum 4096 descriptors. Descriptor
+ * size is aligned to 16 bytes.
+ */
+
+ unsigned int count_align = 32;
+ unsigned int desc_align = 16;
+
+ ring->base_align = 512;
+
+ if (desc_count == 0)
+ desc_count = 4096;
+
+ ring->desc_count = ALIGN(desc_count, count_align);
+
+ ring->desc_size = ALIGN(desc_size, desc_align);
+
+ ring->size = ring->desc_count * ring->desc_size;
+ ring->size_unaligned = ring->size + ring->base_align;
+
+ return ring->size_unaligned;
+}
+
+void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring)
+{
+ memset(ring->descs, 0, ring->size);
+}
+
+int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ vnic_dev_desc_ring_size(ring, desc_count, desc_size);
+
+ ring->descs_unaligned = pci_alloc_consistent(vdev->pdev,
+ ring->size_unaligned,
+ &ring->base_addr_unaligned);
+
+ if (!ring->descs_unaligned) {
+ printk(KERN_ERR
+ "Failed to allocate ring (size=%d), aborting\n",
+ (int)ring->size);
+ return -ENOMEM;
+ }
+
+ ring->base_addr = ALIGN(ring->base_addr_unaligned,
+ ring->base_align);
+ ring->descs = (u8 *)ring->descs_unaligned +
+ (ring->base_addr - ring->base_addr_unaligned);
+
+ vnic_dev_clear_desc_ring(ring);
+
+ ring->desc_avail = ring->desc_count - 1;
+
+ return 0;
+}
+
+void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring)
+{
+ if (ring->descs) {
+ pci_free_consistent(vdev->pdev,
+ ring->size_unaligned,
+ ring->descs_unaligned,
+ ring->base_addr_unaligned);
+ ring->descs = NULL;
+ }
+}
+
+int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+ u64 *a0, u64 *a1, int wait)
+{
+ struct vnic_devcmd __iomem *devcmd = vdev->devcmd;
+ int delay;
+ u32 status;
+ int dev_cmd_err[] = {
+ /* convert from fw's version of error.h to host's version */
+ 0, /* ERR_SUCCESS */
+ EINVAL, /* ERR_EINVAL */
+ EFAULT, /* ERR_EFAULT */
+ EPERM, /* ERR_EPERM */
+ EBUSY, /* ERR_EBUSY */
+ };
+ int err;
+
+ status = ioread32(&devcmd->status);
+ if (status & STAT_BUSY) {
+ printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd));
+ return -EBUSY;
+ }
+
+ if (_CMD_DIR(cmd) & _CMD_DIR_WRITE) {
+ writeq(*a0, &devcmd->args[0]);
+ writeq(*a1, &devcmd->args[1]);
+ wmb();
+ }
+
+ iowrite32(cmd, &devcmd->cmd);
+
+ if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT))
+ return 0;
+
+ for (delay = 0; delay < wait; delay++) {
+
+ udelay(100);
+
+ status = ioread32(&devcmd->status);
+ if (!(status & STAT_BUSY)) {
+
+ if (status & STAT_ERROR) {
+ err = dev_cmd_err[(int)readq(&devcmd->args[0])];
+ printk(KERN_ERR "Error %d devcmd %d\n",
+ err, _CMD_N(cmd));
+ return -err;
+ }
+
+ if (_CMD_DIR(cmd) & _CMD_DIR_READ) {
+ rmb();
+ *a0 = readq(&devcmd->args[0]);
+ *a1 = readq(&devcmd->args[1]);
+ }
+
+ return 0;
+ }
+ }
+
+ printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd));
+ return -ETIMEDOUT;
+}
+
+int vnic_dev_fw_info(struct vnic_dev *vdev,
+ struct vnic_devcmd_fw_info **fw_info)
+{
+ u64 a0, a1 = 0;
+ int wait = 1000;
+ int err = 0;
+
+ if (!vdev->fw_info) {
+ vdev->fw_info = pci_alloc_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_fw_info),
+ &vdev->fw_info_pa);
+ if (!vdev->fw_info)
+ return -ENOMEM;
+
+ a0 = vdev->fw_info_pa;
+
+ /* only get fw_info once and cache it */
+ err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait);
+ }
+
+ *fw_info = vdev->fw_info;
+
+ return err;
+}
+
+int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size,
+ void *value)
+{
+ u64 a0, a1;
+ int wait = 1000;
+ int err;
+
+ a0 = offset;
+ a1 = size;
+
+ err = vnic_dev_cmd(vdev, CMD_DEV_SPEC, &a0, &a1, wait);
+
+ switch (size) {
+ case 1:
+ *(u8 *)value = (u8)a0;
+ break;
+ case 2:
+ *(u16 *)value = (u16)a0;
+ break;
+ case 4:
+ *(u32 *)value = (u32)a0;
+ break;
+ case 8:
+ *(u64 *)value = a0;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ return err;
+}
+
+int vnic_dev_stats_clear(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_STATS_CLEAR, &a0, &a1, wait);
+}
+
+int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats)
+{
+ u64 a0, a1;
+ int wait = 1000;
+
+ if (!vdev->stats) {
+ vdev->stats = pci_alloc_consistent(vdev->pdev,
+ sizeof(struct vnic_stats), &vdev->stats_pa);
+ if (!vdev->stats)
+ return -ENOMEM;
+ }
+
+ *stats = vdev->stats;
+ a0 = vdev->stats_pa;
+ a1 = sizeof(struct vnic_stats);
+
+ return vnic_dev_cmd(vdev, CMD_STATS_DUMP, &a0, &a1, wait);
+}
+
+int vnic_dev_close(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_CLOSE, &a0, &a1, wait);
+}
+
+int vnic_dev_enable(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait);
+}
+
+int vnic_dev_disable(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_DISABLE, &a0, &a1, wait);
+}
+
+int vnic_dev_open(struct vnic_dev *vdev, int arg)
+{
+ u64 a0 = (u32)arg, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_OPEN, &a0, &a1, wait);
+}
+
+int vnic_dev_open_done(struct vnic_dev *vdev, int *done)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ *done = 0;
+
+ err = vnic_dev_cmd(vdev, CMD_OPEN_STATUS, &a0, &a1, wait);
+ if (err)
+ return err;
+
+ *done = (a0 == 0);
+
+ return 0;
+}
+
+int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg)
+{
+ u64 a0 = (u32)arg, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_SOFT_RESET, &a0, &a1, wait);
+}
+
+int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ *done = 0;
+
+ err = vnic_dev_cmd(vdev, CMD_SOFT_RESET_STATUS, &a0, &a1, wait);
+ if (err)
+ return err;
+
+ *done = (a0 == 0);
+
+ return 0;
+}
+
+int vnic_dev_hang_notify(struct vnic_dev *vdev)
+{
+ u64 a0, a1;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait);
+}
+
+int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr)
+{
+ u64 a0, a1;
+ int wait = 1000;
+ int err, i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac_addr[i] = 0;
+
+ err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait);
+ if (err)
+ return err;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac_addr[i] = ((u8 *)&a0)[i];
+
+ return 0;
+}
+
+void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
+ int broadcast, int promisc, int allmulti)
+{
+ u64 a0, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ a0 = (directed ? CMD_PFILTER_DIRECTED : 0) |
+ (multicast ? CMD_PFILTER_MULTICAST : 0) |
+ (broadcast ? CMD_PFILTER_BROADCAST : 0) |
+ (promisc ? CMD_PFILTER_PROMISCUOUS : 0) |
+ (allmulti ? CMD_PFILTER_ALL_MULTICAST : 0);
+
+ err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR "Can't set packet filter\n");
+}
+
+void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ ((u8 *)&a0)[i] = addr[i];
+
+ err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR
+ "Can't add addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5],
+ err);
+}
+
+void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ ((u8 *)&a0)[i] = addr[i];
+
+ err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR
+ "Can't del addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5],
+ err);
+}
+
+int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr)
+{
+ u64 a0, a1;
+ int wait = 1000;
+
+ if (!vdev->notify) {
+ vdev->notify = pci_alloc_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_notify),
+ &vdev->notify_pa);
+ if (!vdev->notify)
+ return -ENOMEM;
+ }
+
+ a0 = vdev->notify_pa;
+ a1 = ((u64)intr << 32) & 0x0000ffff00000000ULL;
+ a1 += sizeof(struct vnic_devcmd_notify);
+
+ return vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait);
+}
+
+void vnic_dev_notify_unset(struct vnic_dev *vdev)
+{
+ u64 a0, a1;
+ int wait = 1000;
+
+ a0 = 0; /* paddr = 0 to unset notify buffer */
+ a1 = 0x0000ffff00000000ULL; /* intr num = -1 to unreg for intr */
+ a1 += sizeof(struct vnic_devcmd_notify);
+
+ vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait);
+}
+
+static int vnic_dev_notify_ready(struct vnic_dev *vdev)
+{
+ u32 *words;
+ unsigned int nwords = sizeof(struct vnic_devcmd_notify) / 4;
+ unsigned int i;
+ u32 csum;
+
+ if (!vdev->notify)
+ return 0;
+
+ do {
+ csum = 0;
+ memcpy(&vdev->notify_copy, vdev->notify,
+ sizeof(struct vnic_devcmd_notify));
+ words = (u32 *)&vdev->notify_copy;
+ for (i = 1; i < nwords; i++)
+ csum += words[i];
+ } while (csum != words[0]);
+
+ return 1;
+}
+
+int vnic_dev_init(struct vnic_dev *vdev, int arg)
+{
+ u64 a0 = (u32)arg, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_INIT, &a0, &a1, wait);
+}
+
+int vnic_dev_link_status(struct vnic_dev *vdev)
+{
+ if (vdev->linkstatus)
+ return *vdev->linkstatus;
+
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.link_state;
+}
+
+u32 vnic_dev_port_speed(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.port_speed;
+}
+
+u32 vnic_dev_msg_lvl(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.msglvl;
+}
+
+u32 vnic_dev_mtu(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.mtu;
+}
+
+u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.link_down_cnt;
+}
+
+void vnic_dev_set_intr_mode(struct vnic_dev *vdev,
+ enum vnic_dev_intr_mode intr_mode)
+{
+ vdev->intr_mode = intr_mode;
+}
+
+enum vnic_dev_intr_mode vnic_dev_get_intr_mode(
+ struct vnic_dev *vdev)
+{
+ return vdev->intr_mode;
+}
+
+void vnic_dev_unregister(struct vnic_dev *vdev)
+{
+ if (vdev) {
+ if (vdev->notify)
+ pci_free_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_notify),
+ vdev->notify,
+ vdev->notify_pa);
+ if (vdev->linkstatus)
+ pci_free_consistent(vdev->pdev,
+ sizeof(u32),
+ vdev->linkstatus,
+ vdev->linkstatus_pa);
+ if (vdev->stats)
+ pci_free_consistent(vdev->pdev,
+ sizeof(struct vnic_dev),
+ vdev->stats, vdev->stats_pa);
+ if (vdev->fw_info)
+ pci_free_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_fw_info),
+ vdev->fw_info, vdev->fw_info_pa);
+ kfree(vdev);
+ }
+}
+
+struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
+ void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar)
+{
+ if (!vdev) {
+ vdev = kzalloc(sizeof(struct vnic_dev), GFP_KERNEL);
+ if (!vdev)
+ return NULL;
+ }
+
+ vdev->priv = priv;
+ vdev->pdev = pdev;
+
+ if (vnic_dev_discover_res(vdev, bar))
+ goto err_out;
+
+ vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0);
+ if (!vdev->devcmd)
+ goto err_out;
+
+ return vdev;
+
+err_out:
+ vnic_dev_unregister(vdev);
+ return NULL;
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_DEV_H_
+#define _VNIC_DEV_H_
+
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_dev_priv fnic_dev_priv
+#define vnic_dev_get_res_count fnic_dev_get_res_count
+#define vnic_dev_get_res fnic_dev_get_res
+#define vnic_dev_desc_ring_size fnic_dev_desc_ring_siz
+#define vnic_dev_clear_desc_ring fnic_dev_clear_desc_ring
+#define vnic_dev_alloc_desc_ring fnic_dev_alloc_desc_ring
+#define vnic_dev_free_desc_ring fnic_dev_free_desc_ring
+#define vnic_dev_cmd fnic_dev_cmd
+#define vnic_dev_fw_info fnic_dev_fw_info
+#define vnic_dev_spec fnic_dev_spec
+#define vnic_dev_stats_clear fnic_dev_stats_clear
+#define vnic_dev_stats_dump fnic_dev_stats_dump
+#define vnic_dev_hang_notify fnic_dev_hang_notify
+#define vnic_dev_packet_filter fnic_dev_packet_filter
+#define vnic_dev_add_addr fnic_dev_add_addr
+#define vnic_dev_del_addr fnic_dev_del_addr
+#define vnic_dev_mac_addr fnic_dev_mac_addr
+#define vnic_dev_notify_set fnic_dev_notify_set
+#define vnic_dev_notify_unset fnic_dev_notify_unset
+#define vnic_dev_link_status fnic_dev_link_status
+#define vnic_dev_port_speed fnic_dev_port_speed
+#define vnic_dev_msg_lvl fnic_dev_msg_lvl
+#define vnic_dev_mtu fnic_dev_mtu
+#define vnic_dev_link_down_cnt fnic_dev_link_down_cnt
+#define vnic_dev_close fnic_dev_close
+#define vnic_dev_enable fnic_dev_enable
+#define vnic_dev_disable fnic_dev_disable
+#define vnic_dev_open fnic_dev_open
+#define vnic_dev_open_done fnic_dev_open_done
+#define vnic_dev_init fnic_dev_init
+#define vnic_dev_soft_reset fnic_dev_soft_reset
+#define vnic_dev_soft_reset_done fnic_dev_soft_reset_done
+#define vnic_dev_set_intr_mode fnic_dev_set_intr_mode
+#define vnic_dev_get_intr_mode fnic_dev_get_intr_mode
+#define vnic_dev_unregister fnic_dev_unregister
+#define vnic_dev_register fnic_dev_register
+
+#ifndef VNIC_PADDR_TARGET
+#define VNIC_PADDR_TARGET 0x0000000000000000ULL
+#endif
+
+#ifndef readq
+static inline u64 readq(void __iomem *reg)
+{
+ return ((u64)readl(reg + 0x4UL) << 32) | (u64)readl(reg);
+}
+
+static inline void writeq(u64 val, void __iomem *reg)
+{
+ writel(val & 0xffffffff, reg);
+ writel(val >> 32, reg + 0x4UL);
+}
+#endif
+
+enum vnic_dev_intr_mode {
+ VNIC_DEV_INTR_MODE_UNKNOWN,
+ VNIC_DEV_INTR_MODE_INTX,
+ VNIC_DEV_INTR_MODE_MSI,
+ VNIC_DEV_INTR_MODE_MSIX,
+};
+
+struct vnic_dev_bar {
+ void __iomem *vaddr;
+ dma_addr_t bus_addr;
+ unsigned long len;
+};
+
+struct vnic_dev_ring {
+ void *descs;
+ size_t size;
+ dma_addr_t base_addr;
+ size_t base_align;
+ void *descs_unaligned;
+ size_t size_unaligned;
+ dma_addr_t base_addr_unaligned;
+ unsigned int desc_size;
+ unsigned int desc_count;
+ unsigned int desc_avail;
+};
+
+struct vnic_dev;
+struct vnic_stats;
+
+void *vnic_dev_priv(struct vnic_dev *vdev);
+unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev,
+ enum vnic_res_type type);
+void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
+ unsigned int index);
+unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
+ unsigned int desc_count,
+ unsigned int desc_size);
+void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring);
+int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_dev_free_desc_ring(struct vnic_dev *vdev,
+ struct vnic_dev_ring *ring);
+int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+ u64 *a0, u64 *a1, int wait);
+int vnic_dev_fw_info(struct vnic_dev *vdev,
+ struct vnic_devcmd_fw_info **fw_info);
+int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset,
+ unsigned int size, void *value);
+int vnic_dev_stats_clear(struct vnic_dev *vdev);
+int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats);
+int vnic_dev_hang_notify(struct vnic_dev *vdev);
+void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
+ int broadcast, int promisc, int allmulti);
+void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr);
+void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr);
+int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr);
+int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr);
+void vnic_dev_notify_unset(struct vnic_dev *vdev);
+int vnic_dev_link_status(struct vnic_dev *vdev);
+u32 vnic_dev_port_speed(struct vnic_dev *vdev);
+u32 vnic_dev_msg_lvl(struct vnic_dev *vdev);
+u32 vnic_dev_mtu(struct vnic_dev *vdev);
+u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev);
+int vnic_dev_close(struct vnic_dev *vdev);
+int vnic_dev_enable(struct vnic_dev *vdev);
+int vnic_dev_disable(struct vnic_dev *vdev);
+int vnic_dev_open(struct vnic_dev *vdev, int arg);
+int vnic_dev_open_done(struct vnic_dev *vdev, int *done);
+int vnic_dev_init(struct vnic_dev *vdev, int arg);
+int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg);
+int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done);
+void vnic_dev_set_intr_mode(struct vnic_dev *vdev,
+ enum vnic_dev_intr_mode intr_mode);
+enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev);
+void vnic_dev_unregister(struct vnic_dev *vdev);
+struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
+ void *priv, struct pci_dev *pdev,
+ struct vnic_dev_bar *bar);
+
+#endif /* _VNIC_DEV_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_DEVCMD_H_
+#define _VNIC_DEVCMD_H_
+
+#define _CMD_NBITS 14
+#define _CMD_VTYPEBITS 10
+#define _CMD_FLAGSBITS 6
+#define _CMD_DIRBITS 2
+
+#define _CMD_NMASK ((1 << _CMD_NBITS)-1)
+#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1)
+#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1)
+#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1)
+
+#define _CMD_NSHIFT 0
+#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
+#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
+#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
+
+/*
+ * Direction bits (from host perspective).
+ */
+#define _CMD_DIR_NONE 0U
+#define _CMD_DIR_WRITE 1U
+#define _CMD_DIR_READ 2U
+#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ)
+
+/*
+ * Flag bits.
+ */
+#define _CMD_FLAGS_NONE 0U
+#define _CMD_FLAGS_NOWAIT 1U
+
+/*
+ * vNIC type bits.
+ */
+#define _CMD_VTYPE_NONE 0U
+#define _CMD_VTYPE_ENET 1U
+#define _CMD_VTYPE_FC 2U
+#define _CMD_VTYPE_SCSI 4U
+#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
+
+/*
+ * Used to create cmds..
+*/
+#define _CMDCF(dir, flags, vtype, nr) \
+ (((dir) << _CMD_DIRSHIFT) | \
+ ((flags) << _CMD_FLAGSSHIFT) | \
+ ((vtype) << _CMD_VTYPESHIFT) | \
+ ((nr) << _CMD_NSHIFT))
+#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr)
+#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
+
+/*
+ * Used to decode cmds..
+*/
+#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
+#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
+#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
+#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
+
+enum vnic_devcmd_cmd {
+ CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
+
+ /* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */
+ CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
+
+ /* dev-specific block member:
+ * in: (u16)a0=offset,(u8)a1=size
+ * out: a0=value */
+ CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
+
+ /* stats clear */
+ CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
+
+ /* stats dump in mem: (u64)a0=paddr to stats area,
+ * (u16)a1=sizeof stats area */
+ CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
+
+ /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
+ CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
+
+ /* hang detection notification */
+ CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
+
+ /* MAC address in (u48)a0 */
+ CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ,
+ _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
+
+ /* disable/enable promisc mode: (u8)a0=0/1 */
+/***** XXX DEPRECATED *****/
+ CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10),
+
+ /* disable/enable all-multi mode: (u8)a0=0/1 */
+/***** XXX DEPRECATED *****/
+ CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11),
+
+ /* add addr from (u48)a0 */
+ CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE,
+ _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
+
+ /* del addr from (u48)a0 */
+ CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE,
+ _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
+
+ /* add VLAN id in (u16)a0 */
+ CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
+
+ /* del VLAN id in (u16)a0 */
+ CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
+
+ /* nic_cfg in (u32)a0 */
+ CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
+
+ /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
+ CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
+
+ /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
+ CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
+
+ /* initiate softreset */
+ CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
+
+ /* softreset status:
+ * out: a0=0 reset complete, a0=1 reset in progress */
+ CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
+
+ /* set struct vnic_devcmd_notify buffer in mem:
+ * in:
+ * (u64)a0=paddr to notify (set paddr=0 to unset)
+ * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
+ * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
+ * out:
+ * (u32)a1 = effective size
+ */
+ CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
+
+ /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
+ * (u8)a1=PXENV_UNDI_xxx */
+ CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
+
+ /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
+ CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
+
+ /* open status:
+ * out: a0=0 open complete, a0=1 open in progress */
+ CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
+
+ /* close vnic */
+ CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
+
+ /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
+ CMD_INIT = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
+
+ /* variant of CMD_INIT, with provisioning info
+ * (u64)a0=paddr of vnic_devcmd_provinfo
+ * (u32)a1=sizeof provision info */
+ CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
+
+ /* enable virtual link */
+ CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
+
+ /* disable virtual link */
+ CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
+
+ /* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */
+ CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
+
+ /* init status:
+ * out: a0=0 init complete, a0=1 init in progress
+ * if a0=0, a1=errno */
+ CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
+
+ /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
+ * (u8)a1=INT13_CMD_xxx */
+ CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
+
+ /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
+ CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
+
+ /* undo initialize of virtual link */
+ CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
+};
+
+/* flags for CMD_OPEN */
+#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */
+
+/* flags for CMD_INIT */
+#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */
+
+/* flags for CMD_PACKET_FILTER */
+#define CMD_PFILTER_DIRECTED 0x01
+#define CMD_PFILTER_MULTICAST 0x02
+#define CMD_PFILTER_BROADCAST 0x04
+#define CMD_PFILTER_PROMISCUOUS 0x08
+#define CMD_PFILTER_ALL_MULTICAST 0x10
+
+enum vnic_devcmd_status {
+ STAT_NONE = 0,
+ STAT_BUSY = 1 << 0, /* cmd in progress */
+ STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */
+};
+
+enum vnic_devcmd_error {
+ ERR_SUCCESS = 0,
+ ERR_EINVAL = 1,
+ ERR_EFAULT = 2,
+ ERR_EPERM = 3,
+ ERR_EBUSY = 4,
+ ERR_ECMDUNKNOWN = 5,
+ ERR_EBADSTATE = 6,
+ ERR_ENOMEM = 7,
+ ERR_ETIMEDOUT = 8,
+ ERR_ELINKDOWN = 9,
+};
+
+struct vnic_devcmd_fw_info {
+ char fw_version[32];
+ char fw_build[32];
+ char hw_version[32];
+ char hw_serial_number[32];
+};
+
+struct vnic_devcmd_notify {
+ u32 csum; /* checksum over following words */
+
+ u32 link_state; /* link up == 1 */
+ u32 port_speed; /* effective port speed (rate limit) */
+ u32 mtu; /* MTU */
+ u32 msglvl; /* requested driver msg lvl */
+ u32 uif; /* uplink interface */
+ u32 status; /* status bits (see VNIC_STF_*) */
+ u32 error; /* error code (see ERR_*) for first ERR */
+ u32 link_down_cnt; /* running count of link down transitions */
+};
+#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */
+
+struct vnic_devcmd_provinfo {
+ u8 oui[3];
+ u8 type;
+ u8 data[0];
+};
+
+/*
+ * Writing cmd register causes STAT_BUSY to get set in status register.
+ * When cmd completes, STAT_BUSY will be cleared.
+ *
+ * If cmd completed successfully STAT_ERROR will be clear
+ * and args registers contain cmd-specific results.
+ *
+ * If cmd error, STAT_ERROR will be set and args[0] contains error code.
+ *
+ * status register is read-only. While STAT_BUSY is set,
+ * all other register contents are read-only.
+ */
+
+/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
+#define VNIC_DEVCMD_NARGS 15
+struct vnic_devcmd {
+ u32 status; /* RO */
+ u32 cmd; /* RW */
+ u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */
+};
+
+#endif /* _VNIC_DEVCMD_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+
+void vnic_intr_free(struct vnic_intr *intr)
+{
+ intr->ctrl = NULL;
+}
+
+int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
+ unsigned int index)
+{
+ intr->index = index;
+ intr->vdev = vdev;
+
+ intr->ctrl = vnic_dev_get_res(vdev, RES_TYPE_INTR_CTRL, index);
+ if (!intr->ctrl) {
+ printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n",
+ index);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
+ unsigned int coalescing_type, unsigned int mask_on_assertion)
+{
+ iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer);
+ iowrite32(coalescing_type, &intr->ctrl->coalescing_type);
+ iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion);
+ iowrite32(0, &intr->ctrl->int_credits);
+}
+
+void vnic_intr_clean(struct vnic_intr *intr)
+{
+ iowrite32(0, &intr->ctrl->int_credits);
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_INTR_H_
+#define _VNIC_INTR_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_intr_unmask fnic_intr_unmask
+#define vnic_intr_mask fnic_intr_mask
+#define vnic_intr_return_credits fnic_intr_return_credits
+#define vnic_intr_credits fnic_intr_credits
+#define vnic_intr_return_all_credits fnic_intr_return_all_credits
+#define vnic_intr_legacy_pba fnic_intr_legacy_pba
+#define vnic_intr_free fnic_intr_free
+#define vnic_intr_alloc fnic_intr_alloc
+#define vnic_intr_init fnic_intr_init
+#define vnic_intr_clean fnic_intr_clean
+
+#define VNIC_INTR_TIMER_MAX 0xffff
+
+#define VNIC_INTR_TIMER_TYPE_ABS 0
+#define VNIC_INTR_TIMER_TYPE_QUIET 1
+
+/* Interrupt control */
+struct vnic_intr_ctrl {
+ u32 coalescing_timer; /* 0x00 */
+ u32 pad0;
+ u32 coalescing_value; /* 0x08 */
+ u32 pad1;
+ u32 coalescing_type; /* 0x10 */
+ u32 pad2;
+ u32 mask_on_assertion; /* 0x18 */
+ u32 pad3;
+ u32 mask; /* 0x20 */
+ u32 pad4;
+ u32 int_credits; /* 0x28 */
+ u32 pad5;
+ u32 int_credit_return; /* 0x30 */
+ u32 pad6;
+};
+
+struct vnic_intr {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_intr_ctrl __iomem *ctrl; /* memory-mapped */
+};
+
+static inline void vnic_intr_unmask(struct vnic_intr *intr)
+{
+ iowrite32(0, &intr->ctrl->mask);
+}
+
+static inline void vnic_intr_mask(struct vnic_intr *intr)
+{
+ iowrite32(1, &intr->ctrl->mask);
+}
+
+static inline void vnic_intr_return_credits(struct vnic_intr *intr,
+ unsigned int credits, int unmask, int reset_timer)
+{
+#define VNIC_INTR_UNMASK_SHIFT 16
+#define VNIC_INTR_RESET_TIMER_SHIFT 17
+
+ u32 int_credit_return = (credits & 0xffff) |
+ (unmask ? (1 << VNIC_INTR_UNMASK_SHIFT) : 0) |
+ (reset_timer ? (1 << VNIC_INTR_RESET_TIMER_SHIFT) : 0);
+
+ iowrite32(int_credit_return, &intr->ctrl->int_credit_return);
+}
+
+static inline unsigned int vnic_intr_credits(struct vnic_intr *intr)
+{
+ return ioread32(&intr->ctrl->int_credits);
+}
+
+static inline void vnic_intr_return_all_credits(struct vnic_intr *intr)
+{
+ unsigned int credits = vnic_intr_credits(intr);
+ int unmask = 1;
+ int reset_timer = 1;
+
+ vnic_intr_return_credits(intr, credits, unmask, reset_timer);
+}
+
+static inline u32 vnic_intr_legacy_pba(u32 __iomem *legacy_pba)
+{
+ /* read PBA without clearing */
+ return ioread32(legacy_pba);
+}
+
+void vnic_intr_free(struct vnic_intr *intr);
+int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
+ unsigned int index);
+void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
+ unsigned int coalescing_type, unsigned int mask_on_assertion);
+void vnic_intr_clean(struct vnic_intr *intr);
+
+#endif /* _VNIC_INTR_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_NIC_H_
+#define _VNIC_NIC_H_
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_set_nic_cfg fnic_set_nic_cfg
+
+#define NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD 0xffUL
+#define NIC_CFG_RSS_DEFAULT_CPU_SHIFT 0
+#define NIC_CFG_RSS_HASH_TYPE (0xffUL << 8)
+#define NIC_CFG_RSS_HASH_TYPE_MASK_FIELD 0xffUL
+#define NIC_CFG_RSS_HASH_TYPE_SHIFT 8
+#define NIC_CFG_RSS_HASH_BITS (7UL << 16)
+#define NIC_CFG_RSS_HASH_BITS_MASK_FIELD 7UL
+#define NIC_CFG_RSS_HASH_BITS_SHIFT 16
+#define NIC_CFG_RSS_BASE_CPU (7UL << 19)
+#define NIC_CFG_RSS_BASE_CPU_MASK_FIELD 7UL
+#define NIC_CFG_RSS_BASE_CPU_SHIFT 19
+#define NIC_CFG_RSS_ENABLE (1UL << 22)
+#define NIC_CFG_RSS_ENABLE_MASK_FIELD 1UL
+#define NIC_CFG_RSS_ENABLE_SHIFT 22
+#define NIC_CFG_TSO_IPID_SPLIT_EN (1UL << 23)
+#define NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD 1UL
+#define NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT 23
+#define NIC_CFG_IG_VLAN_STRIP_EN (1UL << 24)
+#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD 1UL
+#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT 24
+
+static inline void vnic_set_nic_cfg(u32 *nic_cfg,
+ u8 rss_default_cpu, u8 rss_hash_type,
+ u8 rss_hash_bits, u8 rss_base_cpu,
+ u8 rss_enable, u8 tso_ipid_split_en,
+ u8 ig_vlan_strip_en)
+{
+ *nic_cfg = (rss_default_cpu & NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD) |
+ ((rss_hash_type & NIC_CFG_RSS_HASH_TYPE_MASK_FIELD)
+ << NIC_CFG_RSS_HASH_TYPE_SHIFT) |
+ ((rss_hash_bits & NIC_CFG_RSS_HASH_BITS_MASK_FIELD)
+ << NIC_CFG_RSS_HASH_BITS_SHIFT) |
+ ((rss_base_cpu & NIC_CFG_RSS_BASE_CPU_MASK_FIELD)
+ << NIC_CFG_RSS_BASE_CPU_SHIFT) |
+ ((rss_enable & NIC_CFG_RSS_ENABLE_MASK_FIELD)
+ << NIC_CFG_RSS_ENABLE_SHIFT) |
+ ((tso_ipid_split_en & NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD)
+ << NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT) |
+ ((ig_vlan_strip_en & NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD)
+ << NIC_CFG_IG_VLAN_STRIP_EN_SHIFT);
+}
+
+#endif /* _VNIC_NIC_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_RESOURCE_H_
+#define _VNIC_RESOURCE_H_
+
+#define VNIC_RES_MAGIC 0x766E6963L /* 'vnic' */
+#define VNIC_RES_VERSION 0x00000000L
+
+/* vNIC resource types */
+enum vnic_res_type {
+ RES_TYPE_EOL, /* End-of-list */
+ RES_TYPE_WQ, /* Work queues */
+ RES_TYPE_RQ, /* Receive queues */
+ RES_TYPE_CQ, /* Completion queues */
+ RES_TYPE_RSVD1,
+ RES_TYPE_NIC_CFG, /* Enet NIC config registers */
+ RES_TYPE_RSVD2,
+ RES_TYPE_RSVD3,
+ RES_TYPE_RSVD4,
+ RES_TYPE_RSVD5,
+ RES_TYPE_INTR_CTRL, /* Interrupt ctrl table */
+ RES_TYPE_INTR_TABLE, /* MSI/MSI-X Interrupt table */
+ RES_TYPE_INTR_PBA, /* MSI/MSI-X PBA table */
+ RES_TYPE_INTR_PBA_LEGACY, /* Legacy intr status */
+ RES_TYPE_RSVD6,
+ RES_TYPE_RSVD7,
+ RES_TYPE_DEVCMD, /* Device command region */
+ RES_TYPE_PASS_THRU_PAGE, /* Pass-thru page */
+
+ RES_TYPE_MAX, /* Count of resource types */
+};
+
+struct vnic_resource_header {
+ u32 magic;
+ u32 version;
+};
+
+struct vnic_resource {
+ u8 type;
+ u8 bar;
+ u8 pad[2];
+ u32 bar_offset;
+ u32 count;
+};
+
+#endif /* _VNIC_RESOURCE_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_rq.h"
+
+static int vnic_rq_alloc_bufs(struct vnic_rq *rq)
+{
+ struct vnic_rq_buf *buf;
+ struct vnic_dev *vdev;
+ unsigned int i, j, count = rq->ring.desc_count;
+ unsigned int blks = VNIC_RQ_BUF_BLKS_NEEDED(count);
+
+ vdev = rq->vdev;
+
+ for (i = 0; i < blks; i++) {
+ rq->bufs[i] = kzalloc(VNIC_RQ_BUF_BLK_SZ, GFP_ATOMIC);
+ if (!rq->bufs[i]) {
+ printk(KERN_ERR "Failed to alloc rq_bufs\n");
+ return -ENOMEM;
+ }
+ }
+
+ for (i = 0; i < blks; i++) {
+ buf = rq->bufs[i];
+ for (j = 0; j < VNIC_RQ_BUF_BLK_ENTRIES; j++) {
+ buf->index = i * VNIC_RQ_BUF_BLK_ENTRIES + j;
+ buf->desc = (u8 *)rq->ring.descs +
+ rq->ring.desc_size * buf->index;
+ if (buf->index + 1 == count) {
+ buf->next = rq->bufs[0];
+ break;
+ } else if (j + 1 == VNIC_RQ_BUF_BLK_ENTRIES) {
+ buf->next = rq->bufs[i + 1];
+ } else {
+ buf->next = buf + 1;
+ buf++;
+ }
+ }
+ }
+
+ rq->to_use = rq->to_clean = rq->bufs[0];
+ rq->buf_index = 0;
+
+ return 0;
+}
+
+void vnic_rq_free(struct vnic_rq *rq)
+{
+ struct vnic_dev *vdev;
+ unsigned int i;
+
+ vdev = rq->vdev;
+
+ vnic_dev_free_desc_ring(vdev, &rq->ring);
+
+ for (i = 0; i < VNIC_RQ_BUF_BLKS_MAX; i++) {
+ kfree(rq->bufs[i]);
+ rq->bufs[i] = NULL;
+ }
+
+ rq->ctrl = NULL;
+}
+
+int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ int err;
+
+ rq->index = index;
+ rq->vdev = vdev;
+
+ rq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_RQ, index);
+ if (!rq->ctrl) {
+ printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ vnic_rq_disable(rq);
+
+ err = vnic_dev_alloc_desc_ring(vdev, &rq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ err = vnic_rq_alloc_bufs(rq);
+ if (err) {
+ vnic_rq_free(rq);
+ return err;
+ }
+
+ return 0;
+}
+
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u64 paddr;
+ u32 fetch_index;
+
+ paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &rq->ctrl->ring_base);
+ iowrite32(rq->ring.desc_count, &rq->ctrl->ring_size);
+ iowrite32(cq_index, &rq->ctrl->cq_index);
+ iowrite32(error_interrupt_enable, &rq->ctrl->error_interrupt_enable);
+ iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset);
+ iowrite32(0, &rq->ctrl->dropped_packet_count);
+ iowrite32(0, &rq->ctrl->error_status);
+
+ /* Use current fetch_index as the ring starting point */
+ fetch_index = ioread32(&rq->ctrl->fetch_index);
+ rq->to_use = rq->to_clean =
+ &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
+ [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
+ iowrite32(fetch_index, &rq->ctrl->posted_index);
+
+ rq->buf_index = 0;
+}
+
+unsigned int vnic_rq_error_status(struct vnic_rq *rq)
+{
+ return ioread32(&rq->ctrl->error_status);
+}
+
+void vnic_rq_enable(struct vnic_rq *rq)
+{
+ iowrite32(1, &rq->ctrl->enable);
+}
+
+int vnic_rq_disable(struct vnic_rq *rq)
+{
+ unsigned int wait;
+
+ iowrite32(0, &rq->ctrl->enable);
+
+ /* Wait for HW to ACK disable request */
+ for (wait = 0; wait < 100; wait++) {
+ if (!(ioread32(&rq->ctrl->running)))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index);
+
+ return -ETIMEDOUT;
+}
+
+void vnic_rq_clean(struct vnic_rq *rq,
+ void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf))
+{
+ struct vnic_rq_buf *buf;
+ u32 fetch_index;
+
+ BUG_ON(ioread32(&rq->ctrl->enable));
+
+ buf = rq->to_clean;
+
+ while (vnic_rq_desc_used(rq) > 0) {
+
+ (*buf_clean)(rq, buf);
+
+ buf = rq->to_clean = buf->next;
+ rq->ring.desc_avail++;
+ }
+
+ /* Use current fetch_index as the ring starting point */
+ fetch_index = ioread32(&rq->ctrl->fetch_index);
+ rq->to_use = rq->to_clean =
+ &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
+ [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
+ iowrite32(fetch_index, &rq->ctrl->posted_index);
+
+ rq->buf_index = 0;
+
+ vnic_dev_clear_desc_ring(&rq->ring);
+}
+
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_RQ_H_
+#define _VNIC_RQ_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_rq_desc_avail fnic_rq_desc_avail
+#define vnic_rq_desc_used fnic_rq_desc_used
+#define vnic_rq_next_desc fnic_rq_next_desc
+#define vnic_rq_next_index fnic_rq_next_index
+#define vnic_rq_next_buf_index fnic_rq_next_buf_index
+#define vnic_rq_post fnic_rq_post
+#define vnic_rq_posting_soon fnic_rq_posting_soon
+#define vnic_rq_return_descs fnic_rq_return_descs
+#define vnic_rq_service fnic_rq_service
+#define vnic_rq_fill fnic_rq_fill
+#define vnic_rq_free fnic_rq_free
+#define vnic_rq_alloc fnic_rq_alloc
+#define vnic_rq_init fnic_rq_init
+#define vnic_rq_error_status fnic_rq_error_status
+#define vnic_rq_enable fnic_rq_enable
+#define vnic_rq_disable fnic_rq_disable
+#define vnic_rq_clean fnic_rq_clean
+
+/* Receive queue control */
+struct vnic_rq_ctrl {
+ u64 ring_base; /* 0x00 */
+ u32 ring_size; /* 0x08 */
+ u32 pad0;
+ u32 posted_index; /* 0x10 */
+ u32 pad1;
+ u32 cq_index; /* 0x18 */
+ u32 pad2;
+ u32 enable; /* 0x20 */
+ u32 pad3;
+ u32 running; /* 0x28 */
+ u32 pad4;
+ u32 fetch_index; /* 0x30 */
+ u32 pad5;
+ u32 error_interrupt_enable; /* 0x38 */
+ u32 pad6;
+ u32 error_interrupt_offset; /* 0x40 */
+ u32 pad7;
+ u32 error_status; /* 0x48 */
+ u32 pad8;
+ u32 dropped_packet_count; /* 0x50 */
+ u32 pad9;
+ u32 dropped_packet_count_rc; /* 0x58 */
+ u32 pad10;
+};
+
+/* Break the vnic_rq_buf allocations into blocks of 64 entries */
+#define VNIC_RQ_BUF_BLK_ENTRIES 64
+#define VNIC_RQ_BUF_BLK_SZ \
+ (VNIC_RQ_BUF_BLK_ENTRIES * sizeof(struct vnic_rq_buf))
+#define VNIC_RQ_BUF_BLKS_NEEDED(entries) \
+ DIV_ROUND_UP(entries, VNIC_RQ_BUF_BLK_ENTRIES)
+#define VNIC_RQ_BUF_BLKS_MAX VNIC_RQ_BUF_BLKS_NEEDED(4096)
+
+struct vnic_rq_buf {
+ struct vnic_rq_buf *next;
+ dma_addr_t dma_addr;
+ void *os_buf;
+ unsigned int os_buf_index;
+ unsigned int len;
+ unsigned int index;
+ void *desc;
+};
+
+struct vnic_rq {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_rq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ struct vnic_rq_buf *bufs[VNIC_RQ_BUF_BLKS_MAX];
+ struct vnic_rq_buf *to_use;
+ struct vnic_rq_buf *to_clean;
+ void *os_buf_head;
+ unsigned int buf_index;
+ unsigned int pkts_outstanding;
+};
+
+static inline unsigned int vnic_rq_desc_avail(struct vnic_rq *rq)
+{
+ /* how many does SW own? */
+ return rq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_rq_desc_used(struct vnic_rq *rq)
+{
+ /* how many does HW own? */
+ return rq->ring.desc_count - rq->ring.desc_avail - 1;
+}
+
+static inline void *vnic_rq_next_desc(struct vnic_rq *rq)
+{
+ return rq->to_use->desc;
+}
+
+static inline unsigned int vnic_rq_next_index(struct vnic_rq *rq)
+{
+ return rq->to_use->index;
+}
+
+static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq)
+{
+ return rq->buf_index++;
+}
+
+static inline void vnic_rq_post(struct vnic_rq *rq,
+ void *os_buf, unsigned int os_buf_index,
+ dma_addr_t dma_addr, unsigned int len)
+{
+ struct vnic_rq_buf *buf = rq->to_use;
+
+ buf->os_buf = os_buf;
+ buf->os_buf_index = os_buf_index;
+ buf->dma_addr = dma_addr;
+ buf->len = len;
+
+ buf = buf->next;
+ rq->to_use = buf;
+ rq->ring.desc_avail--;
+
+ /* Move the posted_index every nth descriptor
+ */
+
+#ifndef VNIC_RQ_RETURN_RATE
+#define VNIC_RQ_RETURN_RATE 0xf /* keep 2^n - 1 */
+#endif
+
+ if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) {
+ /* Adding write memory barrier prevents compiler and/or CPU
+ * reordering, thus avoiding descriptor posting before
+ * descriptor is initialized. Otherwise, hardware can read
+ * stale descriptor fields.
+ */
+ wmb();
+ iowrite32(buf->index, &rq->ctrl->posted_index);
+ }
+}
+
+static inline int vnic_rq_posting_soon(struct vnic_rq *rq)
+{
+ return (rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0;
+}
+
+static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count)
+{
+ rq->ring.desc_avail += count;
+}
+
+enum desc_return_options {
+ VNIC_RQ_RETURN_DESC,
+ VNIC_RQ_DEFER_RETURN_DESC,
+};
+
+static inline void vnic_rq_service(struct vnic_rq *rq,
+ struct cq_desc *cq_desc, u16 completed_index,
+ int desc_return, void (*buf_service)(struct vnic_rq *rq,
+ struct cq_desc *cq_desc, struct vnic_rq_buf *buf,
+ int skipped, void *opaque), void *opaque)
+{
+ struct vnic_rq_buf *buf;
+ int skipped;
+
+ buf = rq->to_clean;
+ while (1) {
+
+ skipped = (buf->index != completed_index);
+
+ (*buf_service)(rq, cq_desc, buf, skipped, opaque);
+
+ if (desc_return == VNIC_RQ_RETURN_DESC)
+ rq->ring.desc_avail++;
+
+ rq->to_clean = buf->next;
+
+ if (!skipped)
+ break;
+
+ buf = rq->to_clean;
+ }
+}
+
+static inline int vnic_rq_fill(struct vnic_rq *rq,
+ int (*buf_fill)(struct vnic_rq *rq))
+{
+ int err;
+
+ while (vnic_rq_desc_avail(rq) > 1) {
+
+ err = (*buf_fill)(rq);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+void vnic_rq_free(struct vnic_rq *rq);
+int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
+unsigned int vnic_rq_error_status(struct vnic_rq *rq);
+void vnic_rq_enable(struct vnic_rq *rq);
+int vnic_rq_disable(struct vnic_rq *rq);
+void vnic_rq_clean(struct vnic_rq *rq,
+ void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf));
+
+#endif /* _VNIC_RQ_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_SCSI_H_
+#define _VNIC_SCSI_H_
+
+#define VNIC_FNIC_WQ_COPY_COUNT_MIN 1
+#define VNIC_FNIC_WQ_COPY_COUNT_MAX 1
+
+#define VNIC_FNIC_WQ_DESCS_MIN 64
+#define VNIC_FNIC_WQ_DESCS_MAX 128
+
+#define VNIC_FNIC_WQ_COPY_DESCS_MIN 64
+#define VNIC_FNIC_WQ_COPY_DESCS_MAX 512
+
+#define VNIC_FNIC_RQ_DESCS_MIN 64
+#define VNIC_FNIC_RQ_DESCS_MAX 128
+
+#define VNIC_FNIC_EDTOV_MIN 1000
+#define VNIC_FNIC_EDTOV_MAX 255000
+#define VNIC_FNIC_EDTOV_DEF 2000
+
+#define VNIC_FNIC_RATOV_MIN 1000
+#define VNIC_FNIC_RATOV_MAX 255000
+
+#define VNIC_FNIC_MAXDATAFIELDSIZE_MIN 256
+#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2112
+
+#define VNIC_FNIC_FLOGI_RETRIES_MIN 0
+#define VNIC_FNIC_FLOGI_RETRIES_MAX 0xffffffff
+#define VNIC_FNIC_FLOGI_RETRIES_DEF 0xffffffff
+
+#define VNIC_FNIC_FLOGI_TIMEOUT_MIN 1000
+#define VNIC_FNIC_FLOGI_TIMEOUT_MAX 255000
+
+#define VNIC_FNIC_PLOGI_RETRIES_MIN 0
+#define VNIC_FNIC_PLOGI_RETRIES_MAX 255
+#define VNIC_FNIC_PLOGI_RETRIES_DEF 8
+
+#define VNIC_FNIC_PLOGI_TIMEOUT_MIN 1000
+#define VNIC_FNIC_PLOGI_TIMEOUT_MAX 255000
+
+#define VNIC_FNIC_IO_THROTTLE_COUNT_MIN 256
+#define VNIC_FNIC_IO_THROTTLE_COUNT_MAX 4096
+
+#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MIN 0
+#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX 240000
+
+#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MIN 0
+#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX 240000
+
+#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MIN 0
+#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX 255
+
+#define VNIC_FNIC_LUNS_PER_TARGET_MIN 1
+#define VNIC_FNIC_LUNS_PER_TARGET_MAX 1024
+
+/* Device-specific region: scsi configuration */
+struct vnic_fc_config {
+ u64 node_wwn;
+ u64 port_wwn;
+ u32 flags;
+ u32 wq_enet_desc_count;
+ u32 wq_copy_desc_count;
+ u32 rq_desc_count;
+ u32 flogi_retries;
+ u32 flogi_timeout;
+ u32 plogi_retries;
+ u32 plogi_timeout;
+ u32 io_throttle_count;
+ u32 link_down_timeout;
+ u32 port_down_timeout;
+ u32 port_down_io_retries;
+ u32 luns_per_tgt;
+ u16 maxdatafieldsize;
+ u16 ed_tov;
+ u16 ra_tov;
+ u16 intr_timer;
+ u8 intr_timer_type;
+};
+
+#define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */
+#define VFCF_PERBI 0x2 /* persistent binding info available */
+
+#endif /* _VNIC_SCSI_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_STATS_H_
+#define _VNIC_STATS_H_
+
+/* Tx statistics */
+struct vnic_tx_stats {
+ u64 tx_frames_ok;
+ u64 tx_unicast_frames_ok;
+ u64 tx_multicast_frames_ok;
+ u64 tx_broadcast_frames_ok;
+ u64 tx_bytes_ok;
+ u64 tx_unicast_bytes_ok;
+ u64 tx_multicast_bytes_ok;
+ u64 tx_broadcast_bytes_ok;
+ u64 tx_drops;
+ u64 tx_errors;
+ u64 tx_tso;
+ u64 rsvd[16];
+};
+
+/* Rx statistics */
+struct vnic_rx_stats {
+ u64 rx_frames_ok;
+ u64 rx_frames_total;
+ u64 rx_unicast_frames_ok;
+ u64 rx_multicast_frames_ok;
+ u64 rx_broadcast_frames_ok;
+ u64 rx_bytes_ok;
+ u64 rx_unicast_bytes_ok;
+ u64 rx_multicast_bytes_ok;
+ u64 rx_broadcast_bytes_ok;
+ u64 rx_drop;
+ u64 rx_no_bufs;
+ u64 rx_errors;
+ u64 rx_rss;
+ u64 rx_crc_errors;
+ u64 rx_frames_64;
+ u64 rx_frames_127;
+ u64 rx_frames_255;
+ u64 rx_frames_511;
+ u64 rx_frames_1023;
+ u64 rx_frames_1518;
+ u64 rx_frames_to_max;
+ u64 rsvd[16];
+};
+
+struct vnic_stats {
+ struct vnic_tx_stats tx;
+ struct vnic_rx_stats rx;
+};
+
+#endif /* _VNIC_STATS_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+
+static int vnic_wq_alloc_bufs(struct vnic_wq *wq)
+{
+ struct vnic_wq_buf *buf;
+ struct vnic_dev *vdev;
+ unsigned int i, j, count = wq->ring.desc_count;
+ unsigned int blks = VNIC_WQ_BUF_BLKS_NEEDED(count);
+
+ vdev = wq->vdev;
+
+ for (i = 0; i < blks; i++) {
+ wq->bufs[i] = kzalloc(VNIC_WQ_BUF_BLK_SZ, GFP_ATOMIC);
+ if (!wq->bufs[i]) {
+ printk(KERN_ERR "Failed to alloc wq_bufs\n");
+ return -ENOMEM;
+ }
+ }
+
+ for (i = 0; i < blks; i++) {
+ buf = wq->bufs[i];
+ for (j = 0; j < VNIC_WQ_BUF_BLK_ENTRIES; j++) {
+ buf->index = i * VNIC_WQ_BUF_BLK_ENTRIES + j;
+ buf->desc = (u8 *)wq->ring.descs +
+ wq->ring.desc_size * buf->index;
+ if (buf->index + 1 == count) {
+ buf->next = wq->bufs[0];
+ break;
+ } else if (j + 1 == VNIC_WQ_BUF_BLK_ENTRIES) {
+ buf->next = wq->bufs[i + 1];
+ } else {
+ buf->next = buf + 1;
+ buf++;
+ }
+ }
+ }
+
+ wq->to_use = wq->to_clean = wq->bufs[0];
+
+ return 0;
+}
+
+void vnic_wq_free(struct vnic_wq *wq)
+{
+ struct vnic_dev *vdev;
+ unsigned int i;
+
+ vdev = wq->vdev;
+
+ vnic_dev_free_desc_ring(vdev, &wq->ring);
+
+ for (i = 0; i < VNIC_WQ_BUF_BLKS_MAX; i++) {
+ kfree(wq->bufs[i]);
+ wq->bufs[i] = NULL;
+ }
+
+ wq->ctrl = NULL;
+
+}
+
+int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ int err;
+
+ wq->index = index;
+ wq->vdev = vdev;
+
+ wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index);
+ if (!wq->ctrl) {
+ printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ vnic_wq_disable(wq);
+
+ err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ err = vnic_wq_alloc_bufs(wq);
+ if (err) {
+ vnic_wq_free(wq);
+ return err;
+ }
+
+ return 0;
+}
+
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u64 paddr;
+
+ paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &wq->ctrl->ring_base);
+ iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(cq_index, &wq->ctrl->cq_index);
+ iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
+ iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
+ iowrite32(0, &wq->ctrl->error_status);
+}
+
+unsigned int vnic_wq_error_status(struct vnic_wq *wq)
+{
+ return ioread32(&wq->ctrl->error_status);
+}
+
+void vnic_wq_enable(struct vnic_wq *wq)
+{
+ iowrite32(1, &wq->ctrl->enable);
+}
+
+int vnic_wq_disable(struct vnic_wq *wq)
+{
+ unsigned int wait;
+
+ iowrite32(0, &wq->ctrl->enable);
+
+ /* Wait for HW to ACK disable request */
+ for (wait = 0; wait < 100; wait++) {
+ if (!(ioread32(&wq->ctrl->running)))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index);
+
+ return -ETIMEDOUT;
+}
+
+void vnic_wq_clean(struct vnic_wq *wq,
+ void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf))
+{
+ struct vnic_wq_buf *buf;
+
+ BUG_ON(ioread32(&wq->ctrl->enable));
+
+ buf = wq->to_clean;
+
+ while (vnic_wq_desc_used(wq) > 0) {
+
+ (*buf_clean)(wq, buf);
+
+ buf = wq->to_clean = buf->next;
+ wq->ring.desc_avail++;
+ }
+
+ wq->to_use = wq->to_clean = wq->bufs[0];
+
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(0, &wq->ctrl->error_status);
+
+ vnic_dev_clear_desc_ring(&wq->ring);
+}
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_WQ_H_
+#define _VNIC_WQ_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_wq_desc_avail fnic_wq_desc_avail
+#define vnic_wq_desc_used fnic_wq_desc_used
+#define vnic_wq_next_desc fni_cwq_next_desc
+#define vnic_wq_post fnic_wq_post
+#define vnic_wq_service fnic_wq_service
+#define vnic_wq_free fnic_wq_free
+#define vnic_wq_alloc fnic_wq_alloc
+#define vnic_wq_init fnic_wq_init
+#define vnic_wq_error_status fnic_wq_error_status
+#define vnic_wq_enable fnic_wq_enable
+#define vnic_wq_disable fnic_wq_disable
+#define vnic_wq_clean fnic_wq_clean
+
+/* Work queue control */
+struct vnic_wq_ctrl {
+ u64 ring_base; /* 0x00 */
+ u32 ring_size; /* 0x08 */
+ u32 pad0;
+ u32 posted_index; /* 0x10 */
+ u32 pad1;
+ u32 cq_index; /* 0x18 */
+ u32 pad2;
+ u32 enable; /* 0x20 */
+ u32 pad3;
+ u32 running; /* 0x28 */
+ u32 pad4;
+ u32 fetch_index; /* 0x30 */
+ u32 pad5;
+ u32 dca_value; /* 0x38 */
+ u32 pad6;
+ u32 error_interrupt_enable; /* 0x40 */
+ u32 pad7;
+ u32 error_interrupt_offset; /* 0x48 */
+ u32 pad8;
+ u32 error_status; /* 0x50 */
+ u32 pad9;
+};
+
+struct vnic_wq_buf {
+ struct vnic_wq_buf *next;
+ dma_addr_t dma_addr;
+ void *os_buf;
+ unsigned int len;
+ unsigned int index;
+ int sop;
+ void *desc;
+};
+
+/* Break the vnic_wq_buf allocations into blocks of 64 entries */
+#define VNIC_WQ_BUF_BLK_ENTRIES 64
+#define VNIC_WQ_BUF_BLK_SZ \
+ (VNIC_WQ_BUF_BLK_ENTRIES * sizeof(struct vnic_wq_buf))
+#define VNIC_WQ_BUF_BLKS_NEEDED(entries) \
+ DIV_ROUND_UP(entries, VNIC_WQ_BUF_BLK_ENTRIES)
+#define VNIC_WQ_BUF_BLKS_MAX VNIC_WQ_BUF_BLKS_NEEDED(4096)
+
+struct vnic_wq {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ struct vnic_wq_buf *bufs[VNIC_WQ_BUF_BLKS_MAX];
+ struct vnic_wq_buf *to_use;
+ struct vnic_wq_buf *to_clean;
+ unsigned int pkts_outstanding;
+};
+
+static inline unsigned int vnic_wq_desc_avail(struct vnic_wq *wq)
+{
+ /* how many does SW own? */
+ return wq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_wq_desc_used(struct vnic_wq *wq)
+{
+ /* how many does HW own? */
+ return wq->ring.desc_count - wq->ring.desc_avail - 1;
+}
+
+static inline void *vnic_wq_next_desc(struct vnic_wq *wq)
+{
+ return wq->to_use->desc;
+}
+
+static inline void vnic_wq_post(struct vnic_wq *wq,
+ void *os_buf, dma_addr_t dma_addr,
+ unsigned int len, int sop, int eop)
+{
+ struct vnic_wq_buf *buf = wq->to_use;
+
+ buf->sop = sop;
+ buf->os_buf = eop ? os_buf : NULL;
+ buf->dma_addr = dma_addr;
+ buf->len = len;
+
+ buf = buf->next;
+ if (eop) {
+ /* Adding write memory barrier prevents compiler and/or CPU
+ * reordering, thus avoiding descriptor posting before
+ * descriptor is initialized. Otherwise, hardware can read
+ * stale descriptor fields.
+ */
+ wmb();
+ iowrite32(buf->index, &wq->ctrl->posted_index);
+ }
+ wq->to_use = buf;
+
+ wq->ring.desc_avail--;
+}
+
+static inline void vnic_wq_service(struct vnic_wq *wq,
+ struct cq_desc *cq_desc, u16 completed_index,
+ void (*buf_service)(struct vnic_wq *wq,
+ struct cq_desc *cq_desc, struct vnic_wq_buf *buf, void *opaque),
+ void *opaque)
+{
+ struct vnic_wq_buf *buf;
+
+ buf = wq->to_clean;
+ while (1) {
+
+ (*buf_service)(wq, cq_desc, buf, opaque);
+
+ wq->ring.desc_avail++;
+
+ wq->to_clean = buf->next;
+
+ if (buf->index == completed_index)
+ break;
+
+ buf = wq->to_clean;
+ }
+}
+
+void vnic_wq_free(struct vnic_wq *wq);
+int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
+unsigned int vnic_wq_error_status(struct vnic_wq *wq);
+void vnic_wq_enable(struct vnic_wq *wq);
+int vnic_wq_disable(struct vnic_wq *wq);
+void vnic_wq_clean(struct vnic_wq *wq,
+ void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf));
+
+#endif /* _VNIC_WQ_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_wq_copy.h"
+
+void vnic_wq_copy_enable(struct vnic_wq_copy *wq)
+{
+ iowrite32(1, &wq->ctrl->enable);
+}
+
+int vnic_wq_copy_disable(struct vnic_wq_copy *wq)
+{
+ unsigned int wait;
+
+ iowrite32(0, &wq->ctrl->enable);
+
+ /* Wait for HW to ACK disable request */
+ for (wait = 0; wait < 100; wait++) {
+ if (!(ioread32(&wq->ctrl->running)))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_ERR "Failed to disable Copy WQ[%d],"
+ " fetch index=%d, posted_index=%d\n",
+ wq->index, ioread32(&wq->ctrl->fetch_index),
+ ioread32(&wq->ctrl->posted_index));
+
+ return -ENODEV;
+}
+
+void vnic_wq_copy_clean(struct vnic_wq_copy *wq,
+ void (*q_clean)(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *wq_desc))
+{
+ BUG_ON(ioread32(&wq->ctrl->enable));
+
+ if (vnic_wq_copy_desc_in_use(wq))
+ vnic_wq_copy_service(wq, -1, q_clean);
+
+ wq->to_use_index = wq->to_clean_index = 0;
+
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(0, &wq->ctrl->error_status);
+
+ vnic_dev_clear_desc_ring(&wq->ring);
+}
+
+void vnic_wq_copy_free(struct vnic_wq_copy *wq)
+{
+ struct vnic_dev *vdev;
+
+ vdev = wq->vdev;
+ vnic_dev_free_desc_ring(vdev, &wq->ring);
+ wq->ctrl = NULL;
+}
+
+int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
+ unsigned int index, unsigned int desc_count,
+ unsigned int desc_size)
+{
+ int err;
+
+ wq->index = index;
+ wq->vdev = vdev;
+ wq->to_use_index = wq->to_clean_index = 0;
+ wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index);
+ if (!wq->ctrl) {
+ printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ vnic_wq_copy_disable(wq);
+
+ err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u64 paddr;
+
+ paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &wq->ctrl->ring_base);
+ iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(cq_index, &wq->ctrl->cq_index);
+ iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
+ iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
+}
+
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_WQ_COPY_H_
+#define _VNIC_WQ_COPY_H_
+
+#include <linux/pci.h>
+#include "vnic_wq.h"
+#include "fcpio.h"
+
+#define VNIC_WQ_COPY_MAX 1
+
+struct vnic_wq_copy {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ unsigned to_use_index;
+ unsigned to_clean_index;
+};
+
+static inline unsigned int vnic_wq_copy_desc_avail(struct vnic_wq_copy *wq)
+{
+ return wq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_wq_copy_desc_in_use(struct vnic_wq_copy *wq)
+{
+ return wq->ring.desc_count - 1 - wq->ring.desc_avail;
+}
+
+static inline void *vnic_wq_copy_next_desc(struct vnic_wq_copy *wq)
+{
+ struct fcpio_host_req *desc = wq->ring.descs;
+ return &desc[wq->to_use_index];
+}
+
+static inline void vnic_wq_copy_post(struct vnic_wq_copy *wq)
+{
+
+ ((wq->to_use_index + 1) == wq->ring.desc_count) ?
+ (wq->to_use_index = 0) : (wq->to_use_index++);
+ wq->ring.desc_avail--;
+
+ /* Adding write memory barrier prevents compiler and/or CPU
+ * reordering, thus avoiding descriptor posting before
+ * descriptor is initialized. Otherwise, hardware can read
+ * stale descriptor fields.
+ */
+ wmb();
+
+ iowrite32(wq->to_use_index, &wq->ctrl->posted_index);
+}
+
+static inline void vnic_wq_copy_desc_process(struct vnic_wq_copy *wq, u16 index)
+{
+ unsigned int cnt;
+
+ if (wq->to_clean_index <= index)
+ cnt = (index - wq->to_clean_index) + 1;
+ else
+ cnt = wq->ring.desc_count - wq->to_clean_index + index + 1;
+
+ wq->to_clean_index = ((index + 1) % wq->ring.desc_count);
+ wq->ring.desc_avail += cnt;
+
+}
+
+static inline void vnic_wq_copy_service(struct vnic_wq_copy *wq,
+ u16 completed_index,
+ void (*q_service)(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *wq_desc))
+{
+ struct fcpio_host_req *wq_desc = wq->ring.descs;
+ unsigned int curr_index;
+
+ while (1) {
+
+ if (q_service)
+ (*q_service)(wq, &wq_desc[wq->to_clean_index]);
+
+ wq->ring.desc_avail++;
+
+ curr_index = wq->to_clean_index;
+
+ /* increment the to-clean index so that we start
+ * with an unprocessed index next time we enter the loop
+ */
+ ((wq->to_clean_index + 1) == wq->ring.desc_count) ?
+ (wq->to_clean_index = 0) : (wq->to_clean_index++);
+
+ if (curr_index == completed_index)
+ break;
+
+ /* we have cleaned all the entries */
+ if ((completed_index == (u16)-1) &&
+ (wq->to_clean_index == wq->to_use_index))
+ break;
+ }
+}
+
+void vnic_wq_copy_enable(struct vnic_wq_copy *wq);
+int vnic_wq_copy_disable(struct vnic_wq_copy *wq);
+void vnic_wq_copy_free(struct vnic_wq_copy *wq);
+int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
+ unsigned int index, unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
+void vnic_wq_copy_clean(struct vnic_wq_copy *wq,
+ void (*q_clean)(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *wq_desc));
+
+#endif /* _VNIC_WQ_COPY_H_ */
--- /dev/null
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _WQ_ENET_DESC_H_
+#define _WQ_ENET_DESC_H_
+
+/* Ethernet work queue descriptor: 16B */
+struct wq_enet_desc {
+ __le64 address;
+ __le16 length;
+ __le16 mss_loopback;
+ __le16 header_length_flags;
+ __le16 vlan_tag;
+};
+
+#define WQ_ENET_ADDR_BITS 64
+#define WQ_ENET_LEN_BITS 14
+#define WQ_ENET_LEN_MASK ((1 << WQ_ENET_LEN_BITS) - 1)
+#define WQ_ENET_MSS_BITS 14
+#define WQ_ENET_MSS_MASK ((1 << WQ_ENET_MSS_BITS) - 1)
+#define WQ_ENET_MSS_SHIFT 2
+#define WQ_ENET_LOOPBACK_SHIFT 1
+#define WQ_ENET_HDRLEN_BITS 10
+#define WQ_ENET_HDRLEN_MASK ((1 << WQ_ENET_HDRLEN_BITS) - 1)
+#define WQ_ENET_FLAGS_OM_BITS 2
+#define WQ_ENET_FLAGS_OM_MASK ((1 << WQ_ENET_FLAGS_OM_BITS) - 1)
+#define WQ_ENET_FLAGS_EOP_SHIFT 12
+#define WQ_ENET_FLAGS_CQ_ENTRY_SHIFT 13
+#define WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT 14
+#define WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT 15
+
+#define WQ_ENET_OFFLOAD_MODE_CSUM 0
+#define WQ_ENET_OFFLOAD_MODE_RESERVED 1
+#define WQ_ENET_OFFLOAD_MODE_CSUM_L4 2
+#define WQ_ENET_OFFLOAD_MODE_TSO 3
+
+static inline void wq_enet_desc_enc(struct wq_enet_desc *desc,
+ u64 address, u16 length, u16 mss, u16 header_length,
+ u8 offload_mode, u8 eop, u8 cq_entry, u8 fcoe_encap,
+ u8 vlan_tag_insert, u16 vlan_tag, u8 loopback)
+{
+ desc->address = cpu_to_le64(address);
+ desc->length = cpu_to_le16(length & WQ_ENET_LEN_MASK);
+ desc->mss_loopback = cpu_to_le16((mss & WQ_ENET_MSS_MASK) <<
+ WQ_ENET_MSS_SHIFT | (loopback & 1) << WQ_ENET_LOOPBACK_SHIFT);
+ desc->header_length_flags = cpu_to_le16(
+ (header_length & WQ_ENET_HDRLEN_MASK) |
+ (offload_mode & WQ_ENET_FLAGS_OM_MASK) << WQ_ENET_HDRLEN_BITS |
+ (eop & 1) << WQ_ENET_FLAGS_EOP_SHIFT |
+ (cq_entry & 1) << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT |
+ (fcoe_encap & 1) << WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT |
+ (vlan_tag_insert & 1) << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT);
+ desc->vlan_tag = cpu_to_le16(vlan_tag);
+}
+
+static inline void wq_enet_desc_dec(struct wq_enet_desc *desc,
+ u64 *address, u16 *length, u16 *mss, u16 *header_length,
+ u8 *offload_mode, u8 *eop, u8 *cq_entry, u8 *fcoe_encap,
+ u8 *vlan_tag_insert, u16 *vlan_tag, u8 *loopback)
+{
+ *address = le64_to_cpu(desc->address);
+ *length = le16_to_cpu(desc->length) & WQ_ENET_LEN_MASK;
+ *mss = (le16_to_cpu(desc->mss_loopback) >> WQ_ENET_MSS_SHIFT) &
+ WQ_ENET_MSS_MASK;
+ *loopback = (u8)((le16_to_cpu(desc->mss_loopback) >>
+ WQ_ENET_LOOPBACK_SHIFT) & 1);
+ *header_length = le16_to_cpu(desc->header_length_flags) &
+ WQ_ENET_HDRLEN_MASK;
+ *offload_mode = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_HDRLEN_BITS) & WQ_ENET_FLAGS_OM_MASK);
+ *eop = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_EOP_SHIFT) & 1);
+ *cq_entry = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_CQ_ENTRY_SHIFT) & 1);
+ *fcoe_encap = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT) & 1);
+ *vlan_tag_insert = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT) & 1);
+ *vlan_tag = le16_to_cpu(desc->vlan_tag);
+}
+
+#endif /* _WQ_ENET_DESC_H_ */
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
+ struct ata_port *ap = NULL;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
sdev->allow_restart = 1;
- if (ipr_is_gata(res) && res->sata_port) {
+ if (ipr_is_gata(res) && res->sata_port)
+ ap = res->sata_port->ap;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+ if (ap) {
scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
- ata_sas_slave_configure(sdev, res->sata_port->ap);
- } else {
+ ata_sas_slave_configure(sdev, ap);
+ } else
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
- }
+ return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
if (err) {
- iscsi_conn_failure(conn, err);
+ /* got invalid offset/len */
return -EIO;
}
return 0;
.use_clustering = DISABLE_CLUSTERING,
.slave_alloc = iscsi_sw_tcp_slave_alloc,
.slave_configure = iscsi_sw_tcp_slave_configure,
+ .target_alloc = iscsi_target_alloc,
.proc_name = "iscsi_tcp",
.this_id = -1,
};
lport->tt.rport_logoff(rport);
}
+ list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) {
+ rport = PRIV_TO_RPORT(rdata);
+ lport->tt.rport_logoff(rport);
+ }
+
mutex_unlock(&disc->disc_mutex);
}
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_disc *disc = &lport->disc;
- int found = 0;
FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
rport->port_id);
- if (event == RPORT_EV_CREATED) {
+ switch (event) {
+ case RPORT_EV_CREATED:
if (disc) {
- found = 1;
mutex_lock(&disc->disc_mutex);
list_add_tail(&rdata->peers, &disc->rports);
mutex_unlock(&disc->disc_mutex);
}
+ break;
+ case RPORT_EV_LOGO:
+ case RPORT_EV_FAILED:
+ case RPORT_EV_STOP:
+ mutex_lock(&disc->disc_mutex);
+ mutex_lock(&rdata->rp_mutex);
+ if (rdata->trans_state == FC_PORTSTATE_ROGUE)
+ list_del(&rdata->peers);
+ mutex_unlock(&rdata->rp_mutex);
+ mutex_unlock(&disc->disc_mutex);
+ break;
+ default:
+ break;
}
- if (!found)
- FC_DEBUG_DISC("The rport (%6x) is not maintained "
- "by the discovery layer\n", rport->port_id);
}
/**
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->rp_state = RPORT_ST_INIT;
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(rport);
}
}
/**
* fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
+ * Locking Note: This function expects that the disc mutex is locked before
+ * it is called. The discovery callback is then made with the lock released,
+ * and the lock is re-taken before returning from this function
*/
static void fc_disc_done(struct fc_disc *disc)
{
struct fc_lport *lport = disc->lport;
+ enum fc_disc_event event;
FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
fc_host_port_id(lport->host));
- disc->disc_callback(lport, disc->event);
+ event = disc->event;
disc->event = DISC_EV_NONE;
if (disc->requested)
fc_disc_gpn_ft_req(disc);
else
disc->pending = 0;
+
+ mutex_unlock(&disc->disc_mutex);
+ disc->disc_callback(lport, event);
+ mutex_lock(&disc->disc_mutex);
}
/**
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->local_port = lport;
+ list_add_tail(&rdata->peers,
+ &disc->rogue_rports);
lport->tt.rport_login(rport);
} else
FC_DBG("Failed to allocate memory for "
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
*
- * Locking Note: This function expects that the disc_mutex is locked
- * before it is called.
+ * Locking Note: This function is called without disc mutex held, and
+ * should do all its processing with the mutex held
*/
static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
void *disc_arg)
unsigned int len;
int error;
+ mutex_lock(&disc->disc_mutex);
FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
fc_host_port_id(disc->lport->host));
if (IS_ERR(fp)) {
fc_disc_error(disc, fp);
+ mutex_unlock(&disc->disc_mutex);
return;
}
disc->seq_count++;
}
fc_frame_free(fp);
+
+ mutex_unlock(&disc->disc_mutex);
}
/**
static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
{
struct fc_lport *lport;
- struct fc_rport *rport;
struct fc_rport *new_rport;
struct fc_rport_libfc_priv *rdata;
if (dp->ids.port_id == fc_host_port_id(lport->host))
goto out;
- rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
- if (rport)
- fc_disc_del_target(disc, rport);
-
new_rport = lport->tt.rport_create(dp);
if (new_rport) {
rdata = new_rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
kfree(dp);
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(new_rport);
}
return;
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
+ INIT_LIST_HEAD(&disc->rogue_rports);
disc->lport = lport;
disc->delay = FC_DISC_DELAY;
void *arg, u32 timer_msec)
{
enum fc_rctl r_ctl;
- u32 did;
+ u32 did = FC_FID_NONE;
enum fc_fh_type fh_type;
int rc;
static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
- struct fc_lport *lp;
+ struct fc_lport *lport = fsp->lp;
struct fc_frame_header *fh;
struct fcp_txrdy *dd;
u8 r_ctl;
fh = fc_frame_header_get(fp);
r_ctl = fh->fh_r_ctl;
- lp = fsp->lp;
- if (!(lp->state & LPORT_ST_READY))
+ if (!(lport->state & LPORT_ST_READY))
goto out;
if (fc_fcp_lock_pkt(fsp))
goto out;
if (IS_ERR(fp))
fc_fcp_error(fsp, fp);
else if (rc == -ENOMEM)
- fc_fcp_reduce_can_queue(lp);
+ fc_fcp_reduce_can_queue(lport);
}
static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
+ if (lport->dns_rp)
+ lport->tt.rport_logoff(lport->dns_rp);
+ mutex_unlock(&lport->lp_mutex);
+ lport->tt.rport_flush_queue();
+ mutex_lock(&lport->lp_mutex);
fc_lport_enter_logo(lport);
mutex_unlock(&lport->lp_mutex);
cancel_delayed_work_sync(&lport->retry_work);
*/
int fc_lport_destroy(struct fc_lport *lport)
{
+ mutex_lock(&lport->lp_mutex);
+ lport->state = LPORT_ST_NONE;
+ lport->link_up = 0;
lport->tt.frame_send = fc_frame_drop;
+ mutex_unlock(&lport->lp_mutex);
+
lport->tt.fcp_abort_io(lport);
lport->tt.exch_mgr_reset(lport, 0, 0);
return 0;
FC_DEBUG_LPORT("Received a RFT_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RFT_ID) {
FC_DBG("Received a RFT_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
FC_DEBUG_LPORT("Received a RPN_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RPN_ID) {
FC_DBG("Received a RPN_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
if (fh && ct && fh->fh_type == FC_TYPE_CT &&
FC_DEBUG_LPORT("Received a SCR response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_SCR) {
FC_DBG("Received a SCR response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_ready(lport);
FC_DEBUG_LPORT("Received a LOGO response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_LOGO) {
FC_DBG("Received a LOGO response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_reset(lport);
fc_lport_state_enter(lport, LPORT_ST_LOGO);
- /* DNS session should be closed so we can release it here */
- if (lport->dns_rp)
- lport->tt.rport_logoff(lport->dns_rp);
-
fp = fc_frame_alloc(lport, sizeof(*logo));
if (!fp) {
fc_lport_error(lport, fp);
FC_DEBUG_LPORT("Received a FLOGI response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_FLOGI) {
FC_DBG("Received a FLOGI response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
"(%6x).\n", ids.port_id);
event = RPORT_EV_FAILED;
}
+ if (rport->port_id != FC_FID_DIR_SERV)
+ if (rport_ops->event_callback)
+ rport_ops->event_callback(lport, rport,
+ RPORT_EV_FAILED);
put_device(&rport->dev);
rport = new_rport;
rdata = new_rport->dd_data;
int fc_rport_logoff(struct fc_rport *rport)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ struct fc_lport *lport = rdata->local_port;
mutex_lock(&rdata->rp_mutex);
FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
+ " not removing", fc_host_port_id(lport->host),
+ rport->port_id);
+ mutex_unlock(&rdata->rp_mutex);
+ goto out;
+ }
+
fc_rport_enter_logo(rport);
/*
mutex_unlock(&rdata->rp_mutex);
+out:
return 0;
}
case RPORT_ST_PRLI:
case RPORT_ST_LOGO:
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue,
&rdata->event_work);
break;
struct fc_rport *rport = rp_arg;
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- struct fc_els_flogi *plp;
+ struct fc_els_flogi *plp = NULL;
unsigned int tov;
u16 csp_seq;
u16 cssp_seq;
FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_DBG("Received a PLOGI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_DBG("Received a PRLI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_LOGO) {
FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
fc_rport_enter_rtv(rport);
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_RTV) {
FC_DBG("Received a RTV response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
default:
FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
"state %d\n", sid, rdata->rp_state);
+ fc_frame_free(fp);
+ return;
break;
}
reason = ELS_RJT_NONE;
break;
default:
+ fc_frame_free(rx_fp);
+ return;
break;
}
len = fr_len(rx_fp) - sizeof(*fh);
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rjt_data.fp = NULL;
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_NONE;
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
}
EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
+int iscsi_target_alloc(struct scsi_target *starget)
+{
+ struct iscsi_cls_session *cls_session = starget_to_session(starget);
+ struct iscsi_session *session = cls_session->dd_data;
+
+ starget->can_queue = session->scsi_cmds_max;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iscsi_target_alloc);
+
void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *session = cls_session->dd_data;
rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent,
r2t->data_count);
- if (rc)
+ if (rc) {
+ iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED);
return rc;
+ }
+
r2t->sent += r2t->data_count;
goto flush;
}
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
+#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
return;
}
-
#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
/**
- * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules.
+ * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
* @incr: integer to convert.
* @hdw: ascii string holding converted integer plus a string terminator.
*
}
/**
- * lpfc_drvr_version_show: Return the Emulex driver string with version number.
+ * lpfc_drvr_version_show - Return the Emulex driver string with version number
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
}
/**
- * lpfc_info_show: Return some pci info about the host in ascii.
+ * lpfc_info_show - Return some pci info about the host in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text from lpfc_info().
}
/**
- * lpfc_serialnum_show: Return the hba serial number in ascii.
+ * lpfc_serialnum_show - Return the hba serial number in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text serial number.
}
/**
- * lpfc_temp_sensor_show: Return the temperature sensor level.
+ * lpfc_temp_sensor_show - Return the temperature sensor level
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted support level.
}
/**
- * lpfc_modeldesc_show: Return the model description of the hba.
+ * lpfc_modeldesc_show - Return the model description of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model description.
}
/**
- * lpfc_modelname_show: Return the model name of the hba.
+ * lpfc_modelname_show - Return the model name of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model name.
}
/**
- * lpfc_programtype_show: Return the program type of the hba.
+ * lpfc_programtype_show - Return the program type of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag.
+ * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the Menlo Maintenance sli flag.
}
/**
- * lpfc_vportnum_show: Return the port number in ascii of the hba.
+ * lpfc_vportnum_show - Return the port number in ascii of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains scsi vpd program type.
}
/**
- * lpfc_fwrev_show: Return the firmware rev running in the hba.
+ * lpfc_fwrev_show - Return the firmware rev running in the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_hdw_show: Return the jedec information about the hba.
+ * lpfc_hdw_show - Return the jedec information about the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_option_rom_version_show: Return the adapter ROM FCode version.
+ * lpfc_option_rom_version_show - Return the adapter ROM FCode version
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the ROM and FCode ascii strings.
}
/**
- * lpfc_state_show: Return the link state of the port.
+ * lpfc_state_show - Return the link state of the port
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains text describing the state of the link.
}
/**
- * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports.
+ * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the sum of fc mapped and unmapped.
}
/**
- * lpfc_issue_lip: Misnomer, name carried over from long ago.
+ * lpfc_issue_lip - Misnomer, name carried over from long ago
* @shost: Scsi_Host pointer.
*
* Description:
}
/**
- * lpfc_do_offline: Issues a mailbox command to bring the link down.
+ * lpfc_do_offline - Issues a mailbox command to bring the link down
* @phba: lpfc_hba pointer.
* @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
*
* Assumes any error from lpfc_do_offline() will be negative.
* Can wait up to 5 seconds for the port ring buffers count
* to reach zero, prints a warning if it is not zero and continues.
- * lpfc_workq_post_event() returns a non-zero return coce if call fails.
+ * lpfc_workq_post_event() returns a non-zero return code if call fails.
*
* Returns:
* -EIO error posting the event
}
/**
- * lpfc_selective_reset: Offline then onlines the port.
+ * lpfc_selective_reset - Offline then onlines the port
* @phba: lpfc_hba pointer.
*
* Description:
}
/**
- * lpfc_issue_reset: Selectively resets an adapter.
+ * lpfc_issue_reset - Selectively resets an adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string "selective".
}
/**
- * lpfc_nport_evt_cnt_show: Return the number of nport events.
+ * lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the ascii number of nport events.
}
/**
- * lpfc_board_mode_show: Return the state of the board.
+ * lpfc_board_mode_show - Return the state of the board
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the state of the adapter.
}
/**
- * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state.
+ * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing one of the strings "online", "offline", "warm" or "error".
}
/**
- * lpfc_get_hba_info: Return various bits of informaton about the adapter.
+ * lpfc_get_hba_info - Return various bits of informaton about the adapter
* @phba: pointer to the adapter structure.
- * @mxri max xri count.
- * @axri available xri count.
- * @mrpi max rpi count.
- * @arpi available rpi count.
- * @mvpi max vpi count.
- * @avpi available vpi count.
+ * @mxri: max xri count.
+ * @axri: available xri count.
+ * @mrpi: max rpi count.
+ * @arpi: available rpi count.
+ * @mvpi: max vpi count.
+ * @avpi: available vpi count.
*
* Description:
* If an integer pointer for an count is not null then the value for the
}
/**
- * lpfc_max_rpi_show: Return maximum rpi.
+ * lpfc_max_rpi_show - Return maximum rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum rpi count in decimal or "Unknown".
}
/**
- * lpfc_used_rpi_show: Return maximum rpi minus available rpi.
+ * lpfc_used_rpi_show - Return maximum rpi minus available rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the used rpi count in decimal or "Unknown".
}
/**
- * lpfc_max_xri_show: Return maximum xri.
+ * lpfc_max_xri_show - Return maximum xri
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum xri count in decimal or "Unknown".
}
/**
- * lpfc_used_xri_show: Return maximum xpi minus the available xpi.
+ * lpfc_used_xri_show - Return maximum xpi minus the available xpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used xri count in decimal or "Unknown".
}
/**
- * lpfc_max_vpi_show: Return maximum vpi.
+ * lpfc_max_vpi_show - Return maximum vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum vpi count in decimal or "Unknown".
}
/**
- * lpfc_used_vpi_show: Return maximum vpi minus the available vpi.
+ * lpfc_used_vpi_show - Return maximum vpi minus the available vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used vpi count in decimal or "Unknown".
}
/**
- * lpfc_npiv_info_show: Return text about NPIV support for the adapter.
+ * lpfc_npiv_info_show - Return text about NPIV support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: text that must be interpreted to determine if npiv is supported.
}
/**
- * lpfc_poll_show: Return text about poll support for the adapter.
+ * lpfc_poll_show - Return text about poll support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the cfg_poll in hex.
}
/**
- * lpfc_poll_store: Set the value of cfg_poll for the adapter.
+ * lpfc_poll_store - Set the value of cfg_poll for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
}
/**
- * lpfc_param_show: Return a cfg attribute value in decimal.
+ * lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_hex_show: Return a cfg attribute value in hex.
+ * lpfc_param_hex_show - Return a cfg attribute value in hex
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_param_init: Intializes a cfg attribute.
+ * lpfc_param_init - Intializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_set: Set a cfg attribute value.
+ * lpfc_param_set - Set a cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_store: Set a vport attribute value.
+ * lpfc_param_store - Set a vport attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_show: Return decimal formatted cfg attribute value.
+ * lpfc_vport_param_show - Return decimal formatted cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_hex_show: Return hex formatted attribute value.
+ * lpfc_vport_param_hex_show - Return hex formatted attribute value
*
* Description:
* Macro that given an attr e.g.
* hba_queue_depth expands into a function with the name
* lpfc_hba_queue_depth_show
*
- * lpfc_##attr##_show: prints the attribute value in hexidecimal.
+ * lpfc_##attr##_show: prints the attribute value in hexadecimal.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: length of formatted string.
**/
}
/**
- * lpfc_vport_param_init: Initialize a vport cfg attribute.
+ * lpfc_vport_param_init - Initialize a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_set: Set a vport cfg attribute.
+ * lpfc_vport_param_set - Set a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_store: Set a vport attribute.
+ * lpfc_vport_param_store - Set a vport attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
/**
- * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid.
+ * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string lpfc_soft_wwn_key.
lpfc_soft_wwn_enable_store);
/**
- * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter.
+ * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwpn in hexidecimal.
+ * @buf: on return contains the wwpn in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_soft_wwpn_store: Set the ww port name of the adapter.
+ * lpfc_soft_wwpn_store - Set the ww port name of the adapter
* @dev class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: contains the wwpn in hexidecimal.
+ * @buf: contains the wwpn in hexadecimal.
* @count: number of wwpn bytes in buf
*
* Returns:
lpfc_soft_wwpn_show, lpfc_soft_wwpn_store);
/**
- * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter.
+ * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwnn in hexidecimal.
+ * @buf: on return contains the wwnn in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_soft_wwnn_store: sets the ww node name of the adapter.
+ * lpfc_soft_wwnn_store - sets the ww node name of the adapter
* @cdev: class device that is converted into a Scsi_host.
- * @buf: contains the ww node name in hexidecimal.
+ * @buf: contains the ww node name in hexadecimal.
* @count: number of wwnn bytes in buf.
*
* Returns:
"for a device to come back");
/**
- * lpfc_nodev_tmo_show: Return the hba dev loss timeout value.
+ * lpfc_nodev_tmo_show - Return the hba dev loss timeout value
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the dev loss timeout in decimal.
}
/**
- * lpfc_nodev_tmo_init: Set the hba nodev timeout value.
+ * lpfc_nodev_tmo_init - Set the hba nodev timeout value
* @vport: lpfc vport structure pointer.
* @val: contains the nodev timeout value.
*
}
/**
- * lpfc_update_rport_devloss_tmo: Update dev loss tmo value.
+ * lpfc_update_rport_devloss_tmo - Update dev loss tmo value
* @vport: lpfc vport structure pointer.
*
* Description:
}
/**
- * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values.
+ * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
lpfc_vport_param_show(devloss_tmo)
/**
- * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit.
+ * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
lpfc_vport_param_show(restrict_login);
/**
- * lpfc_restrict_login_init: Set the vport restrict login flag.
+ * lpfc_restrict_login_init - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
}
/**
- * lpfc_restrict_login_set: Set the vport restrict login flag.
+ * lpfc_restrict_login_set - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
*/
/**
- * lpfc_topology_set: Set the adapters topology field.
+ * lpfc_topology_set - Set the adapters topology field
* @phba: lpfc_hba pointer.
* @val: topology value.
*
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_topology_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_topology_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (val >= 0 && val <= 6) {
prev_val = phba->cfg_topology;
phba->cfg_topology = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_topology = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0467 lpfc_topology attribute cannot be set to %d, "
MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
lpfc_param_show(topology)
lpfc_param_init(topology, 0, 0, 6)
-lpfc_param_store(topology)
static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
lpfc_topology_show, lpfc_topology_store);
/**
- * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl
- * sysfs file.
+ * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device.
* @buf: Data buffer.
* @count: Size of the data buffer.
unsigned long base, step, bucket_type;
if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
- if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN)
+ if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
return -EINVAL;
strcpy(bucket_data, buf);
/**
- * lpfc_stat_data_ctrl_show: Read callback function for
- * lpfc_stat_data_ctrl sysfs file.
+ * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device object.
* @buf: Data buffer.
*
/**
- * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data
- * sysfs attribute.
+ * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute
* @kobj: Pointer to the kernel object
* @bin_attr: Attribute object
* @buff: Buffer pointer
*/
/**
- * lpfc_link_speed_set: Set the adapters link speed.
+ * lpfc_link_speed_set - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
return -EINVAL;
- if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ if ((val >= 0 && val <= 8)
&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_link_speed = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
lpfc_param_show(link_speed)
/**
- * lpfc_link_speed_init: Set the adapters link speed.
+ * lpfc_link_speed_init - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
return -EINVAL;
}
-lpfc_param_store(link_speed)
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
lpfc_link_speed_show, lpfc_link_speed_store);
/*
- * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
* This value can be set to values between 64 and 256. The default value is
* 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
* will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
};
/**
- * sysfs_ctlreg_write: Write method for writing to ctlreg.
+ * sysfs_ctlreg_write - Write method for writing to ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to the adapter IOREG space.
}
/**
- * sysfs_ctlreg_read: Read method for reading from ctlreg.
+ * sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: if succesful contains the data from the adapter IOREG space.
};
/**
- * sysfs_mbox_idle: frees the sysfs mailbox.
+ * sysfs_mbox_idle - frees the sysfs mailbox
* @phba: lpfc_hba pointer
**/
static void
}
/**
- * sysfs_mbox_write: Write method for writing information via mbox.
+ * sysfs_mbox_write - Write method for writing information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to sysfs mbox.
}
/**
- * sysfs_mbox_read: Read method for reading information via mbox.
+ * sysfs_mbox_read - Read method for reading information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be read from sysfs mbox.
};
/**
- * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries.
+ * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
*
* Return codes:
}
/**
- * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries.
+ * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
**/
void
*/
/**
- * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id.
+ * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_port_type: Set the value of the scsi host port type.
+ * lpfc_get_host_port_type - Set the value of the scsi host port type
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_port_state: Set the value of the scsi host port state.
+ * lpfc_get_host_port_state - Set the value of the scsi host port state
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_speed: Set the value of the scsi host speed.
+ * lpfc_get_host_speed - Set the value of the scsi host speed
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name.
+ * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_stats: Return statistical information about the adapter.
+ * lpfc_get_stats - Return statistical information about the adapter
* @shost: kernel scsi host pointer.
*
* Notes:
}
/**
- * lpfc_reset_stats: Copy the adapter link stats information.
+ * lpfc_reset_stats - Copy the adapter link stats information
* @shost: kernel scsi host pointer.
**/
static void
*/
/**
- * lpfc_get_node_by_target: Return the nodelist for a target.
+ * lpfc_get_node_by_target - Return the nodelist for a target
* @starget: kernel scsi target pointer.
*
* Returns:
}
/**
- * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1.
+ * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
* @starget: kernel scsi target pointer.
**/
static void
}
/**
- * lpfc_get_starget_node_name: Set the target node name.
+ * lpfc_get_starget_node_name - Set the target node name
* @starget: kernel scsi target pointer.
*
* Description: Set the target node name to the ndlp node name wwn or zero.
}
/**
- * lpfc_get_starget_port_name: Set the target port name.
+ * lpfc_get_starget_port_name - Set the target port name
* @starget: kernel scsi target pointer.
*
* Description: set the target port name to the ndlp port name wwn or zero.
}
/**
- * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo.
+ * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
* @rport: fc rport address.
* @timeout: new value for dev loss tmo.
*
}
/**
- * lpfc_rport_show_function: Return rport target information.
+ * lpfc_rport_show_function - Return rport target information
*
* Description:
* Macro that uses field to generate a function with the name lpfc_show_rport_
static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
/**
- * lpfc_set_vport_symbolic_name: Set the vport's symbolic name.
+ * lpfc_set_vport_symbolic_name - Set the vport's symbolic name
* @fc_vport: The fc_vport who's symbolic name has been changed.
*
* Description:
};
/**
- * lpfc_get_cfgparam: Used during probe_one to init the adapter structure.
+ * lpfc_get_cfgparam - Used during probe_one to init the adapter structure
* @phba: lpfc_hba pointer.
**/
void
}
/**
- * lpfc_get_vport_cfgparam: Used during port create, init the vport structure.
+ * lpfc_get_vport_cfgparam - Used during port create, init the vport structure
* @vport: lpfc_vport pointer.
**/
void
struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
+void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
+ uint32_t);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
#include "lpfc_debugfs.h"
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/**
+/*
* debugfs interface
*
* To access this interface the user should:
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
"Set debugfs slow ring trace depth");
-int lpfc_debugfs_mask_disc_trc;
+static int lpfc_debugfs_mask_disc_trc;
module_param(lpfc_debugfs_mask_disc_trc, int, 0);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
"Set debugfs discovery trace mask");
static unsigned long lpfc_debugfs_start_time = 0L;
/**
- * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer.
+ * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
* @vport: The vport to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
}
/**
- * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer.
+ * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
* @phba: The HBA to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
static int lpfc_debugfs_last_hbq = -1;
/**
- * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer.
+ * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
* @phba: The HBA to gather host buffer info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
static int lpfc_debugfs_last_hba_slim_off;
/**
- * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer.
+ * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
* @phba: The HBA to gather SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
len += snprintf(buf+len, size-len, "HBA SLIM\n");
lpfc_memcpy_from_slim(buffer,
- ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off,
- 1024);
+ phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);
ptr = (uint32_t *)&buffer[0];
off = lpfc_debugfs_last_hba_slim_off;
}
/**
- * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer.
+ * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
* @phba: The HBA to gather Host SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
}
/**
- * lpfc_debugfs_nodelist_data - Dump target node list to a buffer.
+ * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
* @vport: The vport to gather target node info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
#endif
/**
- * lpfc_debugfs_disc_trc - Store discovery trace log.
+ * lpfc_debugfs_disc_trc - Store discovery trace log
* @vport: The vport to associate this trace string with for retrieval.
* @mask: Log entry classification.
* @fmt: Format string to be displayed when dumping the log.
}
/**
- * lpfc_debugfs_slow_ring_trc - Store slow ring trace log.
+ * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
* @phba: The phba to associate this trace string with for retrieval.
* @fmt: Format string to be displayed when dumping the log.
* @data1: 1st data parameter to be applied to @fmt.
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
- * lpfc_debugfs_disc_trc_open - Open the discovery trace log.
+ * lpfc_debugfs_disc_trc_open - Open the discovery trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log.
+ * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer.
+ * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
/**
- * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file.
+ * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_lseek - Seek through a debugfs file.
+ * lpfc_debugfs_lseek - Seek through a debugfs file
* @file: The file pointer to seek through.
* @off: The offset to seek to or the amount to seek by.
* @whence: Indicates how to seek.
}
/**
- * lpfc_debugfs_read - Read a debugfs file.
+ * lpfc_debugfs_read - Read a debugfs file
* @file: The file pointer to read from.
* @buf: The buffer to copy the data to.
* @nbytes: The number of bytes to read.
}
/**
- * lpfc_debugfs_release - Release the buffer used to store debugfs file data.
+ * lpfc_debugfs_release - Release the buffer used to store debugfs file data
* @inode: The inode pointer that contains a vport pointer. (unused)
* @file: The file pointer that contains the buffer to release.
*
#endif
/**
- * lpfc_debugfs_initialize - Initialize debugfs for a vport.
+ * lpfc_debugfs_initialize - Initialize debugfs for a vport
* @vport: The vport pointer to initialize.
*
* Description:
}
/**
- * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport.
+ * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport
* @vport: The vport pointer to remove from debugfs.
*
* Description:
#define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */
struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
+ struct lpfc_hba *phba;
struct fc_rport *rport; /* Corresponding FC transport
port structure */
struct lpfc_vport *vport;
static int lpfc_max_els_tries = 3;
/**
- * lpfc_els_chk_latt: Check host link attention event for a vport.
+ * lpfc_els_chk_latt - Check host link attention event for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there is an outstanding host link
}
/**
- * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure.
+ * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
* @vport: pointer to a host virtual N_Port data structure.
* @expectRsp: flag indicating whether response is expected.
* @cmdSize: size of the ELS command.
}
/**
- * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport.
+ * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a fabric registration login for a @vport. An
}
/**
- * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port.
+ * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
}
/**
- * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port.
+ * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
}
/**
- * lpfc_cmpl_els_flogi: Completion callback function for flogi.
+ * lpfc_cmpl_els_flogi - Completion callback function for flogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport.
+ * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs.
+ * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
}
/**
- * lpfc_initial_flogi: Issue an initial fabric login for a vport.
+ * lpfc_initial_flogi - Issue an initial fabric login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Login (FLOGI) for the @vport
}
/**
- * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport.
+ * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Discover (FDISC) for the @vport
}
/**
- * lpfc_more_plogi: Check and issue remaining plogis for a vport.
+ * lpfc_more_plogi - Check and issue remaining plogis for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there are more remaining Port Logins
}
/**
- * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp.
+ * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
* @phba: pointer to lpfc hba data structure.
* @prsp: pointer to response IOCB payload.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_end_rscn: Check and handle more rscn for a vport.
+ * lpfc_end_rscn - Check and handle more rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether more Registration State Change
}
/**
- * lpfc_cmpl_els_plogi: Completion callback function for plogi.
+ * lpfc_cmpl_els_plogi - Completion callback function for plogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport.
+ * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @did: destination port identifier.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_prli: Completion callback function for prli.
+ * lpfc_cmpl_els_prli - Completion callback function for prli
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_prli: Issue a prli iocb command for a vport.
+ * lpfc_issue_els_prli - Issue a prli iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_rscn_disc: Perform rscn discovery for a vport.
+ * lpfc_rscn_disc - Perform rscn discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine performs Registration State Change Notification (RSCN)
}
/**
- * lpfc_adisc_done: Complete the adisc phase of discovery.
+ * lpfc_adisc_done - Complete the adisc phase of discovery
* @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
*
* This function is called when the final ADISC is completed during discovery.
}
/**
- * lpfc_more_adisc: Issue more adisc as needed.
+ * lpfc_more_adisc - Issue more adisc as needed
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine determines whether there are more ndlps on a @vport
}
/**
- * lpfc_cmpl_els_adisc: Completion callback function for adisc.
+ * lpfc_cmpl_els_adisc - Completion callback function for adisc
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport.
+ * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_logo: Completion callback function for logo.
+ * lpfc_cmpl_els_logo - Completion callback function for logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_logo: Issue a logo to an node on a vport.
+ * lpfc_issue_els_logo - Issue a logo to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_cmd: Completion callback function for generic els command.
+ * lpfc_cmpl_els_cmd - Completion callback function for generic els command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_scr: Issue a scr to an node on a vport.
+ * lpfc_issue_els_scr - Issue a scr to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_issue_els_farpr: Issue a farp to an node on a vport.
+ * lpfc_issue_els_farpr - Issue a farp to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry.
+ * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry
* @vport: pointer to a host virtual N_Port data structure.
* @nlp: pointer to a node-list data structure.
*
}
/**
- * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer.
+ * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer
* @ptr: holder for the pointer to the timer function associated data (ndlp).
*
* This routine is invoked by the ndlp delayed-function timer to check
}
/**
- * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function.
+ * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function
* @ndlp: pointer to a node-list data structure.
*
* This routine is the worker-thread handler for processing the @ndlp delayed
}
/**
- * lpfc_els_retry: Make retry decision on an els command iocb.
+ * lpfc_els_retry - Make retry decision on an els command iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb.
+ * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb
* @phba: pointer to lpfc hba data structure.
* @buf_ptr1: pointer to the lpfc DMA buffer data structure.
*
}
/**
- * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl.
+ * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl
* @phba: pointer to lpfc hba data structure.
* @buf_ptr: pointer to the lpfc dma buffer data structure.
*
}
/**
- * lpfc_els_free_iocb: Free a command iocb and its associated resources.
+ * lpfc_els_free_iocb - Free a command iocb and its associated resources
* @phba: pointer to lpfc hba data structure.
* @elsiocb: pointer to lpfc els command iocb data structure.
*
}
/**
- * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response.
+ * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd.
+ * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd.
+ * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command.
+ * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @flag: the els command code to be accepted.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command.
+ * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @rejectError:
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd.
+ * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd.
+ * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command.
+ * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @format: rnid command format.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport.
+ * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Address Discover (ADISC) ELS commands to those
}
/**
- * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc.
+ * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Port Login (PLOGI) ELS commands to all the N_Ports
}
/**
- * lpfc_els_flush_rscn: Clean up any rscn activities with a vport.
+ * lpfc_els_flush_rscn - Clean up any rscn activities with a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine cleans up any Registration State Change Notification
}
/**
- * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did.
+ * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did
* @vport: pointer to a host virtual N_Port data structure.
* @did: remote destination port identifier.
*
}
/**
- * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn
+ * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the
}
/**
- * lpfc_send_rscn_event: Send an RSCN event to management application.
+ * lpfc_send_rscn_event - Send an RSCN event to management application
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
*
}
/**
- * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb.
+ * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_handle_rscn: Handle rscn for a vport.
+ * lpfc_els_handle_rscn - Handle rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine handles the Registration State Configuration Notification
}
/**
- * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb.
+ * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb.
+ * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb.
+ * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd.
+ * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_els_rcv_rps: Process an unsolicited rps iocb.
+ * lpfc_els_rcv_rps - Process an unsolicited rps iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command.
+ * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdsize: size of the ELS command.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb.
+ * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_farp: Process an unsolicited farp request els command.
+ * lpfc_els_rcv_farp - Process an unsolicited farp request els command
* @vport: pointer to a virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb.
+ * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_fan: Process an unsolicited fan iocb command.
+ * lpfc_els_rcv_fan - Process an unsolicited fan iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @fan_ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_timeout: Handler funciton to the els timer.
+ * lpfc_els_timeout - Handler funciton to the els timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the ELS timer after timeout. It posts the ELS
}
/**
- * lpfc_els_timeout_handler: Process an els timeout event.
+ * lpfc_els_timeout_handler - Process an els timeout event
* @vport: pointer to a virtual N_Port data structure.
*
* This routine is the actual handler function that processes an ELS timeout
}
/**
- * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport.
+ * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
-
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+ /* Cancell all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return;
}
/**
- * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA.
+ * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
lpfc_sli_issue_abort_iotag(phba, pring, piocb);
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
return;
}
/**
- * lpfc_send_els_failure_event: Posts an ELS command failure event.
+ * lpfc_send_els_failure_event - Posts an ELS command failure event
* @phba: Pointer to hba context object.
* @cmdiocbp: Pointer to command iocb which reported error.
* @rspiocbp: Pointer to response iocb which reported error.
}
/**
- * lpfc_send_els_event: Posts unsolicited els event.
+ * lpfc_send_els_event - Posts unsolicited els event
* @vport: Pointer to vport object.
* @ndlp: Pointer FC node object.
* @cmd: ELS command code.
/**
- * lpfc_els_unsol_buffer: Process an unsolicited event data buffer.
+ * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @vport: pointer to a host virtual N_Port data structure.
}
/**
- * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier.
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: host virtual N_Port identifier.
*
}
/**
- * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring.
+ * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @elsiocb: pointer to lpfc els iocb data structure.
}
/**
- * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr.
+ * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a virtual N_Port data structure.
*
}
/**
- * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport.
+ * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_register_new_vport: Register a new vport with a HBA.
+ * lpfc_register_new_vport - Register a new vport with a HBA
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command.
+ * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_fdisc: Issue a fdisc iocb command.
+ * lpfc_issue_els_fdisc - Issue a fdisc iocb command
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_npiv_logo: Completion function with vport logo.
+ * lpfc_cmpl_els_npiv_logo - Completion function with vport logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_npiv_logo: Issue a logo off a vport.
+ * lpfc_issue_els_npiv_logo - Issue a logo off a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
*
}
/**
- * lpfc_fabric_block_timeout: Handler function to the fabric block timer.
+ * lpfc_fabric_block_timeout - Handler function to the fabric block timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the fabric iocb block timer after
}
/**
- * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list.
+ * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list
* @phba: pointer to lpfc hba data structure.
*
* This routine issues one fabric iocb from the driver internal list to
}
/**
- * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command.
+ * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine unblocks the issuing fabric iocb command. The function
}
/**
- * lpfc_block_fabric_iocbs: Block issuing fabric iocb command.
+ * lpfc_block_fabric_iocbs - Block issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine blocks the issuing fabric iocb for a specified amount of
}
/**
- * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb.
+ * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_fabric_iocb: Issue a fabric iocb command.
+ * lpfc_issue_fabric_iocb - Issue a fabric iocb command
* @phba: pointer to lpfc hba data structure.
* @iocb: pointer to lpfc command iocb data structure.
*
}
/**
- * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list
* @vport: pointer to a virtual N_Port data structure.
*
* This routine aborts all the IOCBs associated with a @vport from the
LIST_HEAD(completions);
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list
* @ndlp: pointer to a node-list data structure.
*
* This routine aborts all the IOCBs associated with an @ndlp from the
void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
- struct lpfc_hba *phba = ndlp->vport->phba;
+ struct lpfc_hba *phba = ndlp->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list.
+ * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the IOCBs currently on the driver internal
void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
{
LIST_HEAD(completions);
- struct lpfc_iocbq *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->fabric_iocb_list, &completions);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
return;
}
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
"rport terminate: sid:x%x did:x%x flg:x%x",
}
/**
- * lpfc_alloc_fast_evt: Allocates data structure for posting event.
+ * lpfc_alloc_fast_evt - Allocates data structure for posting event
* @phba: Pointer to hba context object.
*
* This function is called from the functions which need to post
}
/**
- * lpfc_free_fast_evt: Frees event data structure.
+ * lpfc_free_fast_evt - Frees event data structure
* @phba: Pointer to hba context object.
* @evt: Event object which need to be freed.
*
}
/**
- * lpfc_send_fastpath_evt: Posts events generated from fast path.
+ * lpfc_send_fastpath_evt - Posts events generated from fast path
* @phba: Pointer to hba context object.
* @evtp: Event data structure.
*
NLP_STE_UNUSED_NODE);
}
/**
- * lpfc_initialize_node: Initialize all fields of node object.
+ * lpfc_initialize_node - Initialize all fields of node object
* @vport: Pointer to Virtual Port object.
* @ndlp: Pointer to FC node object.
* @did: FC_ID of the node.
- * This function is always called when node object need to
- * be initialized. It initializes all the fields of the node
- * object.
+ *
+ * This function is always called when node object need to be initialized.
+ * It initializes all the fields of the node object. Although the reference
+ * to phba from @ndlp can be obtained indirectly through it's reference to
+ * @vport, a direct reference to phba is taken here by @ndlp. This is due
+ * to the life-span of the @ndlp might go beyond the existence of @vport as
+ * the final release of ndlp is determined by its reference count. And, the
+ * operation on @ndlp needs the reference to phba.
**/
static inline void
lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
ndlp->nlp_DID = did;
ndlp->vport = vport;
+ ndlp->phba = vport->phba;
ndlp->nlp_sid = NLP_NO_SID;
kref_init(&ndlp->kref);
NLP_INT_NODE_ACT(ndlp);
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *icmd;
uint32_t rpi, i;
lpfc_fabric_abort_nport(ndlp);
}
}
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl)(phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return 0;
}
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
- }
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
+ "1836 Could not issue "
+ "unreg_login(all_rpis) status %d\n", rc);
}
}
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
"1815 Could not issue "
- "unreg_did (default rpis)\n");
- mempool_free(mbox, phba->mbox_mem_pool);
- }
+ "unreg_did (default rpis) status %d\n",
+ rc);
}
}
if (ndlp->nlp_flag & NLP_RCV_PLOGI)
return NULL;
- spin_lock_irq(shost->host_lock);
- ndlp->nlp_flag |= NLP_NPR_2B_DISC;
- spin_unlock_irq(shost->host_lock);
-
/* Since this node is marked for discovery,
* delay timeout is not needed.
*/
lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+ spin_unlock_irq(shost->host_lock);
} else
ndlp = NULL;
} else {
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
static void
lpfc_nlp_remove(ndlp->vport, ndlp);
/* clear the ndlp active flag for all release cases */
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
NLP_CLR_NODE_ACT(ndlp);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
/* free ndlp memory for final ndlp release */
if (NLP_CHK_FREE_REQ(ndlp)) {
kfree(ndlp->lat_data);
- mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool);
+ mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
}
}
* ndlp reference count that is in the process of being
* released.
*/
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
"node put: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
/* Check the ndlp memory free acknowledge flag to avoid the
* possible race condition that kref_put got invoked again
static DEFINE_IDR(lpfc_hba_index);
/**
- * lpfc_config_port_prep: Perform lpfc initialization prior to config port.
+ * lpfc_config_port_prep - Perform lpfc initialization prior to config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization prior to issuing the CONFIG_PORT
}
/**
- * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd.
+ * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
- * command used for getting wake up parameters.
+ * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_port_post: Perform lpfc initialization after config port.
+ * lpfc_config_port_post - Perform lpfc initialization after config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization after the CONFIG_PORT mailbox
lpfc_config_port_post(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
sizeof (struct lpfc_name));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
if (phba->SerialNumber[0] == 0) {
}
/**
- * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset.
+ * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do LPFC uninitialization before the HBA is reset when
}
/**
- * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset.
+ * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *mp, *next_mp;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
LIST_HEAD(completions);
int i;
pring->txcmplq_cnt = 0;
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq,
- list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
lpfc_sli_abort_iocb_ring(phba, pring);
spin_lock_irq(&phba->hbalock);
}
/**
- * lpfc_hb_timeout: The HBA-timer timeout handler.
+ * lpfc_hb_timeout - The HBA-timer timeout handler
* @ptr: unsigned long holds the pointer to lpfc hba data structure.
*
* This is the HBA-timer timeout handler registered to the lpfc driver. When
}
/**
- * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function.
+ * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_hb_timeout_handler: The HBA-timer timeout handler.
+ * lpfc_hb_timeout_handler - The HBA-timer timeout handler
* @phba: pointer to lpfc hba data structure.
*
* This is the actual HBA-timer timeout handler to be invoked by the worker
}
/**
- * lpfc_offline_eratt: Bring lpfc offline on hardware error attention.
+ * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to bring the HBA offline when HBA hardware error
}
/**
- * lpfc_handle_eratt: The HBA hardware error handler.
+ * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the deferred HBA hardware error
+ * conditions. This type of error is indicated by HBA by setting ER1
+ * and another ER bit in the host status register. The driver will
+ * wait until the ER1 bit clears before handling the error condition.
+ **/
+static void
+lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
+{
+ uint32_t old_host_status = phba->work_hs;
+ struct lpfc_sli_ring *pring;
+ struct lpfc_sli *psli = &phba->sli;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0479 Deferred Adapter Hardware Error "
+ "Data: x%x x%x x%x\n",
+ phba->work_hs,
+ phba->work_status[0], phba->work_status[1]);
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+
+
+ /*
+ * Firmware stops when it triggred erratt. That could cause the I/Os
+ * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
+ * SCSI layer retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+
+ /*
+ * There was a firmware error. Take the hba offline and then
+ * attempt to restart it.
+ */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+
+ /* Wait for the ER1 bit to clear.*/
+ while (phba->work_hs & HS_FFER1) {
+ msleep(100);
+ phba->work_hs = readl(phba->HSregaddr);
+ /* If driver is unloading let the worker thread continue */
+ if (phba->pport->load_flag & FC_UNLOADING) {
+ phba->work_hs = 0;
+ break;
+ }
+ }
+
+ /*
+ * This is to ptrotect against a race condition in which
+ * first write to the host attention register clear the
+ * host status register.
+ */
+ if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
+ phba->work_hs = old_host_status & ~HS_FFER1;
+
+ phba->hba_flag &= ~DEFER_ERATT;
+ phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+ phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+}
+
+/**
+ * lpfc_handle_eratt - The HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
(char *) &board_event,
LPFC_NL_VENDOR_ID);
+ if (phba->hba_flag & DEFER_ERATT)
+ lpfc_handle_deferred_eratt(phba);
+
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
}
/**
- * lpfc_handle_latt: The HBA link event handler.
+ * lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked from the worker thread to handle a HBA host
}
/**
- * lpfc_parse_vpd: Parse VPD (Vital Product Data).
+ * lpfc_parse_vpd - Parse VPD (Vital Product Data)
* @phba: pointer to lpfc hba data structure.
* @vpd: pointer to the vital product data.
* @len: length of the vital product data in bytes.
}
/**
- * lpfc_get_hba_model_desc: Retrieve HBA device model name and description.
+ * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
* @phba: pointer to lpfc hba data structure.
* @mdp: pointer to the data structure to hold the derived model name.
* @descp: pointer to the data structure to hold the derived description.
m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
}
/**
- * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring.
+ * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a IOCB ring.
* @cnt: the number of IOCBs to be posted to the IOCB ring.
}
/**
- * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring.
+ * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
* @phba: pointer to lpfc hba data structure.
*
* This routine posts initial receive IOCB buffers to the ELS ring. The
#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
/**
- * lpfc_sha_init: Set up initial array of hash table entries.
+ * lpfc_sha_init - Set up initial array of hash table entries
* @HashResultPointer: pointer to an array as hash table.
*
* This routine sets up the initial values to the array of hash table entries
}
/**
- * lpfc_sha_iterate: Iterate initial hash table with the working hash table.
+ * lpfc_sha_iterate - Iterate initial hash table with the working hash table
* @HashResultPointer: pointer to an initial/result hash table.
* @HashWorkingPointer: pointer to an working hash table.
*
}
/**
- * lpfc_challenge_key: Create challenge key based on WWPN of the HBA.
+ * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
* @RandomChallenge: pointer to the entry of host challenge random number array.
* @HashWorking: pointer to the entry of the working hash array.
*
}
/**
- * lpfc_hba_init: Perform special handling for LC HBA initialization.
+ * lpfc_hba_init - Perform special handling for LC HBA initialization
* @phba: pointer to lpfc hba data structure.
* @hbainit: pointer to an array of unsigned 32-bit integers.
*
}
/**
- * lpfc_cleanup: Performs vport cleanups before deleting a vport.
+ * lpfc_cleanup - Performs vport cleanups before deleting a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine performs the necessary cleanups before deleting the @vport.
}
/**
- * lpfc_stop_vport_timers: Stop all the timers associated with a vport.
+ * lpfc_stop_vport_timers - Stop all the timers associated with a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine stops all the timers associated with a @vport. This function
}
/**
- * lpfc_stop_phba_timers: Stop all the timers associated with an HBA.
+ * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
}
/**
- * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked.
+ * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as blocked. Once the HBA's
}
/**
- * lpfc_online: Initialize and bring a HBA online.
+ * lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
* This routine initializes the HBA and brings a HBA online. During this
}
/**
- * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked.
+ * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as not blocked. Once the
}
/**
- * lpfc_offline_prep: Prepare a HBA to be brought offline.
+ * lpfc_offline_prep - Prepare a HBA to be brought offline
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to prepare a HBA to be brought offline. It performs
}
/**
- * lpfc_offline: Bring a HBA offline.
+ * lpfc_offline - Bring a HBA offline
* @phba: pointer to lpfc hba data structure.
*
* This routine actually brings a HBA offline. It stops all the timers
}
/**
- * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists.
+ * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the SCSI buffers and IOCBs from the driver
}
/**
- * lpfc_create_port: Create an FC port.
+ * lpfc_create_port - Create an FC port
* @phba: pointer to lpfc hba data structure.
* @instance: a unique integer ID to this FC port.
* @dev: pointer to the device data structure.
}
/**
- * destroy_port: Destroy an FC port.
+ * destroy_port - destroy an FC port
* @vport: pointer to an lpfc virtual N_Port data structure.
*
* This routine destroys a FC port from the upper layer protocol. All the
}
/**
- * lpfc_get_instance: Get a unique integer ID.
+ * lpfc_get_instance - Get a unique integer ID
*
* This routine allocates a unique integer ID from lpfc_hba_index pool. It
* uses the kernel idr facility to perform the task.
}
/**
- * lpfc_scan_finished: method for SCSI layer to detect whether scan is done.
+ * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
* @shost: pointer to SCSI host data structure.
* @time: elapsed time of the scan in jiffies.
*
}
/**
- * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port.
+ * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
* @shost: pointer to SCSI host data structure.
*
* This routine initializes a given SCSI host attributes on a FC port. The
}
/**
- * lpfc_enable_msix: Enable MSI-X interrupt mode.
+ * lpfc_enable_msix - Enable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors. The kernel
}
/**
- * lpfc_disable_msix: Disable MSI-X interrupt mode.
+ * lpfc_disable_msix - Disable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
}
/**
- * lpfc_enable_msi: Enable MSI interrupt mode.
+ * lpfc_enable_msi - Enable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode. The kernel
}
/**
- * lpfc_disable_msi: Disable MSI interrupt mode.
+ * lpfc_disable_msi - Disable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the MSI interrupt mode. The driver
}
/**
- * lpfc_log_intr_mode: Log the active interrupt mode
+ * lpfc_log_intr_mode - Log the active interrupt mode
* @phba: pointer to lpfc hba data structure.
* @intr_mode: active interrupt mode adopted.
*
}
/**
- * lpfc_enable_intr: Enable device interrupt.
+ * lpfc_enable_intr - Enable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
}
/**
- * lpfc_disable_intr: Disable device interrupt.
+ * lpfc_disable_intr - Disable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate the
}
/**
- * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
+ * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
}
/**
- * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem.
+ * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem. When an
lpfc_free_sysfs_attr(vport);
- kthread_stop(phba->worker_thread);
-
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
+
+ /* HBA interrupt will be diabled after this call */
lpfc_sli_hba_down(phba);
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
+ /* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
lpfc_stop_phba_timers(phba);
}
/**
- * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
* @pdev: pointer to PCI device
* @msg: power management message
*
}
/**
- * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
+ * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem to support
}
/**
- * lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
+ * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
}
/**
- * lpfc_io_slot_reset: Restart a PCI device from scratch.
+ * lpfc_io_slot_reset - Restart a PCI device from scratch
* @pdev: pointer to PCI device.
*
* This routine is registered to the PCI subsystem for error handling. This is
}
/**
- * lpfc_io_resume: Resume PCI I/O operation.
+ * lpfc_io_resume - Resume PCI I/O operation
* @pdev: pointer to PCI device
*
* This routine is registered to the PCI subsystem for error handling. It is
};
/**
- * lpfc_init: lpfc module initialization routine.
+ * lpfc_init - lpfc module initialization routine
*
* This routine is to be invoked when the lpfc module is loaded into the
* kernel. The special kernel macro module_init() is used to indicate the
}
/**
- * lpfc_exit: lpfc module removal routine.
+ * lpfc_exit - lpfc module removal routine
*
* This routine is invoked when the lpfc module is removed from the kernel.
* The special kernel macro module_exit() is used to indicate the role of
#define LOG_FCP 0x40 /* FCP traffic history */
#define LOG_NODE 0x80 /* Node table events */
#define LOG_TEMP 0x100 /* Temperature sensor events */
-#define LOG_BG 0x200 /* BlockBuard events */
+#define LOG_BG 0x200 /* BlockGuard events */
#define LOG_MISC 0x400 /* Miscellaneous events */
#define LOG_SLI 0x800 /* SLI events */
#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
#include "lpfc_compat.h"
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory.
+ * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @offset: offset for dumping VPD memory mailbox command.
}
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
+ * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
+ *
* This function create a dump memory mailbox command to dump wake up
* parameters.
*/
}
/**
- * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
+ * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_async: Prepare a mailbox command for enabling HBA async event.
+ * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @ring: ring number for the asynchronous event to be configured.
}
/**
- * lpfc_heart_beat: Prepare a mailbox command for heart beat.
+ * lpfc_heart_beat - Prepare a mailbox command for heart beat
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_read_la: Prepare a mailbox command for reading HBA link attention.
+ * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @mp: DMA buffer memory for reading the link attention information into.
}
/**
- * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention.
+ * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA.
+ * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
+ * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @topology: the link topology for the link to be initialized to.
}
/**
- * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters.
+ * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @vpi: virtual N_Port identifier.
}
/**
- * lpfc_unreg_did: Prepare a mailbox command for unregistering DID.
+ * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
}
/**
- * lpfc_read_config: Prepare a mailbox command for reading HBA configuration.
+ * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats.
+ * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_reg_login: Prepare a mailbox command for registering remote login.
+ * lpfc_reg_login - Prepare a mailbox command for registering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
}
/**
- * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login.
+ * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @rpi: remote port identifier
}
/**
- * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier.
+ * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
}
/**
- * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id.
+ * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @pmb: pointer to the driver internal queue element for mailbox command.
}
/**
- * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB)
+ * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB)
* @phba: pointer to lpfc hba data structure.
*
* This routine sets up and initializes the IOCB rings in the Port Control
}
/**
- * lpfc_read_rev: Prepare a mailbox command for reading HBA revision.
+ * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2.
+ * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3.
+ * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5.
+ * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ.
+ * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
* @phba: pointer to lpfc hba data structure.
* @id: HBQ identifier.
* @hbq_desc: pointer to the HBA descriptor data structure.
}
/**
- * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring.
+ * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
* @phba: pointer to lpfc hba data structure.
* @ring:
* @pmb: pointer to the driver internal queue element for mailbox command.
}
/**
- * lpfc_config_port: Prepare a mailbox command for configuring port.
+ * lpfc_config_port - Prepare a mailbox command for configuring port
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_kill_board: Prepare a mailbox command for killing board.
+ * lpfc_kill_board - Prepare a mailbox command for killing board
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue.
+ * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue.
+ * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
*
* Driver maintains a internal mailbox command queue implemented as a linked
}
/**
- * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list.
+ * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value.
+ * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
* @cmd: mailbox command code.
*
/**
- * lpfc_mem_alloc: create and allocate all PCI and memory pools
+ * lpfc_mem_alloc - create and allocate all PCI and memory pools
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
}
/**
- * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
* Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
* lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask.
+ * lpfc_nodelist. Also frees the VPI bitmask
*
* Returns: None
**/
}
/**
- * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool
+ * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool
* @phba: HBA which owns the pool to allocate from
* @mem_flags: indicates if this is a priority (MEM_PRI) allocation
* @handle: used to return the DMA-mapped address of the mbuf
}
/**
- * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
+ * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
}
/**
- * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
+ * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
* Returns: None
**/
void
-
lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
{
unsigned long iflags;
}
/**
- * lpfc_els_hbq_alloc: Allocate an HBQ buffer
+ * lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
* Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
}
/**
- * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
}
/**
- * lpfc_in_buf_free: Free a DMA buffer
+ * lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
*
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd;
/* Abort outstanding I/O on NPort <nlp_DID> */
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
return 0;
}
}
/**
- * lpfc_update_stats: Update statistical data for the command completion.
+ * lpfc_update_stats - Update statistical data for the command completion
* @phba: Pointer to HBA object.
* @lpfc_cmd: lpfc scsi command object pointer.
*
}
/**
- * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
- * event.
+ * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
* @phba: Pointer to HBA context object.
* @vport: Pointer to vport object.
* @ndlp: Pointer to FC node associated with the target.
}
/**
- * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread.
+ * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine is called when there is resource error in driver or firmware.
}
/**
- * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
**/
static inline void
lpfc_rampup_queue_depth(struct lpfc_vport *vport,
- struct scsi_device *sdev)
+ uint32_t queue_depth)
{
unsigned long flags;
struct lpfc_hba *phba = vport->phba;
uint32_t evt_posted;
atomic_inc(&phba->num_cmd_success);
- if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
+ if (vport->cfg_lun_queue_depth <= queue_depth)
return;
spin_lock_irqsave(&phba->hbalock, flags);
if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
}
/**
- * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker
}
/**
- * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_UP_QUEUE event for worker
}
/**
- * lpfc_scsi_dev_block: set all scsi hosts to block state.
+ * lpfc_scsi_dev_block - set all scsi hosts to block state
* @phba: Pointer to HBA context object.
*
* This function walks vport list and set each SCSI host to block state
}
/**
- * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * lpfc_new_scsi_buf - Scsi buffer allocator
* @vport: The virtual port for which this call being executed.
*
* This routine allocates a scsi buffer, which contains all the necessary
}
/**
- * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
* @phba: The Hba for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
}
/**
- * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
}
/**
- * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* Due to difference in data length between DIF/non-DIF paths,
* we need to set word 4 of IOCB here
*/
- iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
return 0;
}
/**
* lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
* @sc: in: SCSI command
- * @apptagmask out: app tag mask
- * @apptagval out: app tag value
- * @reftag out: ref tag (reference tag)
+ * @apptagmask: out: app tag mask
+ * @apptagval: out: app tag value
+ * @reftag: out: ref tag (reference tag)
*
* Description:
* Extract DIF paramters from the command if possible. Otherwise,
*/
cmd->sense_buffer[8] = 0; /* Information */
cmd->sense_buffer[9] = 0xa; /* Add. length */
- do_div(bghm, cmd->device->sector_size);
+ bghm /= cmd->device->sector_size;
failing_sector = scsi_get_lba(cmd);
failing_sector += bghm;
}
/**
- * lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
+ * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
* @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
}
/**
- * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
}
/**
- * lpfc_handler_fcp_err: FCP response handler.
+ * lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @rsp_iocb: The response IOCB which contains FCP error.
}
/**
- * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
* @pIocbOut: The response IOCBQ for the scsi cmnd .
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
int result;
- struct scsi_device *sdev, *tmp_sdev;
+ struct scsi_device *tmp_sdev;
int depth = 0;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
+ struct Scsi_Host *shost = cmd->device->host;
+ uint32_t queue_depth, scsi_id;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
lpfc_update_stats(phba, lpfc_cmd);
result = cmd->result;
- sdev = cmd->device;
if (vport->cfg_max_scsicmpl_time &&
time_after(jiffies, lpfc_cmd->start_time +
msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if (pnode->cmd_qdepth >
atomic_read(&pnode->cmd_pending) &&
pnode->last_change_time = jiffies;
}
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
time_after(jiffies, pnode->last_change_time +
msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
pnode->cmd_qdepth += pnode->cmd_qdepth *
LPFC_TGTQ_RAMPUP_PCENT / 100;
if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
pnode->last_change_time = jiffies;
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
}
}
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+
+ /* The sdev is not guaranteed to be valid post scsi_done upcall. */
+ queue_depth = cmd->device->queue_depth;
+ scsi_id = cmd->device->id;
cmd->scsi_done(cmd);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
if (!result)
- lpfc_rampup_queue_depth(vport, sdev);
+ lpfc_rampup_queue_depth(vport, queue_depth);
if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
((jiffies - pnode->last_ramp_up_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
((jiffies - pnode->last_q_full_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
- (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
- shost_for_each_device(tmp_sdev, sdev->host) {
+ (vport->cfg_lun_queue_depth > queue_depth)) {
+ shost_for_each_device(tmp_sdev, shost) {
if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
- if (tmp_sdev->id != sdev->id)
+ if (tmp_sdev->id != scsi_id)
continue;
if (tmp_sdev->ordered_tags)
scsi_adjust_queue_depth(tmp_sdev,
}
lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
0xFFFFFFFF,
- sdev->queue_depth - 1, sdev->queue_depth);
+ queue_depth , queue_depth + 1);
}
/*
NLP_CHK_NODE_ACT(pnode)) {
pnode->last_q_full_time = jiffies;
- shost_for_each_device(tmp_sdev, sdev->host) {
- if (tmp_sdev->id != sdev->id)
+ shost_for_each_device(tmp_sdev, shost) {
+ if (tmp_sdev->id != scsi_id)
continue;
depth = scsi_track_queue_full(tmp_sdev,
tmp_sdev->queue_depth - 1);
* scsi_track_queue_full.
*/
if (depth == -1)
- depth = sdev->host->cmd_per_lun;
+ depth = shost->cmd_per_lun;
if (depth) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
/**
- * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
* @data: A pointer to the immediate command data portion of the IOCB.
* @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
*
}
/**
- * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit.
+ * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
}
/**
- * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
* @rspiocbq: Pointer to lpfc_iocbq data structure.
}
/**
- * lpfc_scsi_tgt_reset: Target reset handler.
+ * lpfc_scsi_tgt_reset - Target reset handler
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
* @vport: The virtual port for which this call is being executed.
* @tgt_id: Target ID.
}
/**
- * lpfc_info: Info entry point of scsi_host_template data structure.
+ * lpfc_info - Info entry point of scsi_host_template data structure
* @host: The scsi host for which this call is being executed.
*
* This routine provides module information about hba.
}
/**
- * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
* @phba: The Hba for which this call is being executed.
*
* This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo.
}
/**
- * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
* @phba: The Hba for which this call is being executed.
*
* This routine starts the fcp_poll_timer of @phba.
}
/**
- * lpfc_poll_timeout: Restart polling timer.
+ * lpfc_poll_timeout - Restart polling timer
* @ptr: Map to lpfc_hba data structure pointer.
*
* This routine restarts fcp_poll timer, when FCP ring polling is enable
}
/**
- * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
- * structure.
+ * lpfc_queuecommand - scsi_host_template queuecommand entry point
* @cmnd: Pointer to scsi_cmnd data structure.
* @done: Pointer to done routine.
*
}
/**
- * lpfc_block_error_handler: Routine to block error handler.
+ * lpfc_block_error_handler - Routine to block error handler
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
}
/**
- * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
- *structure.
+ * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine aborts @cmnd pending in base driver.
}
/**
- * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
- *data structure.
+ * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does a device reset by sending a TARGET_RESET task management
*
* Return code :
* 0x2003 - Error
- * 0ex2002 - Success
+ * 0x2002 - Success
**/
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
- * Template data structure.
+ * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does target reset to all target on @cmnd->device->host.
}
/**
- * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
- * structure.
+ * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
* @sdev: Pointer to scsi_device.
*
* This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
}
/**
- * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
- * structure.
+ * lpfc_slave_configure - scsi_host_template slave_configure entry point
* @sdev: Pointer to scsi_device.
*
* This routine configures following items
}
/**
- * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
* @sdev: Pointer to scsi_device.
*
* This routine sets @sdev hostatdata filed to null.
} lpfc_iocb_type;
/**
- * lpfc_cmd_iocb: Get next command iocb entry in the ring.
+ * lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_resp_iocb: Get next response iocb entry in the ring.
+ * lpfc_resp_iocb - Get next response iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with hbalock held. This function
}
/**
- * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function
}
/**
- * __lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_iocb_cmd_type: Get the iocb type.
- * @iocb_cmnd : iocb command code.
+ * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list.
+ * @phba: Pointer to HBA context object.
+ * @iocblist: List of IOCBs.
+ * @ulpstatus: ULP status in IOCB command field.
+ * @ulpWord4: ULP word-4 in IOCB command field.
+ *
+ * This function is called with a list of IOCBs to cancel. It cancels the IOCB
+ * on the list by invoking the complete callback function associated with the
+ * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond
+ * fields.
+ **/
+void
+lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist,
+ uint32_t ulpstatus, uint32_t ulpWord4)
+{
+ struct lpfc_iocbq *piocb;
+
+ while (!list_empty(iocblist)) {
+ list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
+
+ if (!piocb->iocb_cmpl)
+ lpfc_sli_release_iocbq(phba, piocb);
+ else {
+ piocb->iocb.ulpStatus = ulpstatus;
+ piocb->iocb.un.ulpWord[4] = ulpWord4;
+ (piocb->iocb_cmpl) (phba, piocb, piocb);
+ }
+ }
+ return;
+}
+
+/**
+ * lpfc_sli_iocb_cmd_type - Get the iocb type
+ * @iocb_cmnd: iocb command code.
*
* This function is called by ring event handler function to get the iocb type.
* This function translates the iocb command to an iocb command type used to
}
/**
- * lpfc_sli_ring_map: Issue config_ring mbox for all rings.
+ * lpfc_sli_ring_map - Issue config_ring mbox for all rings
* @phba: Pointer to HBA context object.
*
* This function is called from SLI initialization code
}
/**
- * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq.
+ * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to the driver iocb object.
}
/**
- * lpfc_sli_ringtx_get: Get first element of the txq.
+ * lpfc_sli_ringtx_get - Get first element of the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring.
+ * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_iotag: Get an iotag for the iocb.
+ * lpfc_sli_next_iotag - Get an iotag for the iocb
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_submit_iocb: Submit an iocb to the firmware.
+ * lpfc_sli_submit_iocb - Submit an iocb to the firmware
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocb: Pointer to iocb slot in the ring.
}
/**
- * lpfc_sli_update_full_ring: Update the chip attention register.
+ * lpfc_sli_update_full_ring - Update the chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_update_ring: Update chip attention register.
+ * lpfc_sli_update_ring - Update chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_resume_iocb: Process iocbs in the txq.
+ * lpfc_sli_resume_iocb - Process iocbs in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ.
+ * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
*
}
/**
- * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers.
+ * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held to free all the
}
/**
- * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware.
+ * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @hbq_buf: Pointer to HBQ buffer.
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
.buffer_count = 0,
- .init_count = 20,
- .add_count = 5,
+ .init_count = 40,
+ .add_count = 40,
};
/* HBQ for the extra ring if needed */
};
/**
- * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ.
+ * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @count: Number of HBQ buffers to be posted.
}
/**
- * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware.
+ * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware
* @phba: Pointer to HBA context object.
* @qno: HBQ number.
*
}
/**
- * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ.
+ * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ
* @phba: Pointer to HBA context object.
* @qno: HBQ queue number.
*
}
/**
- * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag.
+ * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
*
}
/**
- * lpfc_sli_free_hbq: Give back the hbq buffer to firmware.
+ * lpfc_sli_free_hbq - Give back the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbq_buffer: Pointer to HBQ buffer.
*
}
/**
- * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox.
+ * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox
* @mbxCommand: mailbox command code.
*
* This function is called by the mailbox event handler function to verify
}
/**
- * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from
- * lpfc_sli_issue_mbox_wait.
+ * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to mailbox command.
*
/**
- * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler.
+ * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler
* @phba: Pointer to HBA context object.
* @pmb: Pointer to mailbox object.
*
}
/**
- * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware.
+ * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function processes all
}
/**
- * lpfc_sli_get_buff: Get the buffer associated with the buffer tag.
+ * lpfc_sli_get_buff - Get the buffer associated with the buffer tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: buffer tag.
/**
- * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler.
+ * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the unsolicited iocb.
}
/**
- * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb.
+ * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @prspiocb: Pointer to response iocb object.
}
/**
- * lpfc_sli_process_sol_iocb: process solicited iocb completion.
+ * lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the response iocb to be processed.
* Ring <ringno> handler: unexpected completion IoTag
* <IoTag>
*/
- lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0322 Ring %d handler: "
"unexpected completion IoTag x%x "
"Data: x%x x%x x%x x%x\n",
}
/**
- * lpfc_sli_rsp_pointers_error: Response ring pointer error handler.
+ * lpfc_sli_rsp_pointers_error - Response ring pointer error handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_poll_eratt: Error attention polling timer timeout handler.
+ * lpfc_poll_eratt - Error attention polling timer timeout handler
* @ptr: Pointer to address of HBA context object.
*
* This function is invoked by the Error Attention polling timer when the
}
/**
- * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode.
+ * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode
* @phba: Pointer to HBA context object.
*
* This function is called from lpfc_queuecommand, lpfc_poll_timeout,
}
/**
- * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring.
+ * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
}
/**
- * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings.
+ * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
}
/**
- * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring.
+ * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
{
LIST_HEAD(completions);
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd = NULL;
if (pring->ringno == LPFC_ELS_RING) {
lpfc_fabric_abort_hba(phba);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring.
+ * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
* @phba: Pointer to HBA context object.
*
* This function flushes all iocbs in the fcp ring and frees all the iocb
{
LIST_HEAD(txq);
LIST_HEAD(txcmplq);
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
spin_unlock_irq(&phba->hbalock);
/* Flush the txq */
- while (!list_empty(&txq)) {
- iocb = list_get_first(&txq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
/* Flush the txcmpq */
- while (!list_empty(&txcmplq)) {
- iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
}
/**
- * lpfc_sli_brdready: Check for host status bits.
+ * lpfc_sli_brdready - Check for host status bits
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
- * lpfc_reset_barrier: Make HBA ready for HBA reset.
+ * lpfc_reset_barrier - Make HBA ready for HBA reset
* @phba: Pointer to HBA context object.
*
* This function is called before resetting an HBA. This
}
/**
- * lpfc_sli_brdkill: Issue a kill_board mailbox command.
+ * lpfc_sli_brdkill - Issue a kill_board mailbox command
* @phba: Pointer to HBA context object.
*
* This function issues a kill_board mailbox command and waits for
}
/**
- * lpfc_sli_brdreset: Reset the HBA.
+ * lpfc_sli_brdreset - Reset the HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
}
/**
- * lpfc_sli_brdrestart: Restart the HBA.
+ * lpfc_sli_brdrestart - Restart the HBA
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
}
/**
- * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart.
+ * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
* This function is called after a HBA restart to wait for successful
}
/**
- * lpfc_sli_hbq_count: Get the number of HBQs to be configured.
+ * lpfc_sli_hbq_count - Get the number of HBQs to be configured
*
* This function calculates and returns the number of HBQs required to be
* configured.
}
/**
- * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries.
+ * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries
*
* This function adds the number of hbq entries in every HBQ to get
* the total number of hbq entries required for the HBA and returns
}
/**
- * lpfc_sli_hbq_size: Calculate memory required for all hbq entries.
+ * lpfc_sli_hbq_size - Calculate memory required for all hbq entries
*
* This function calculates amount of memory required for all hbq entries
* to be configured and returns the total memory required.
}
/**
- * lpfc_sli_hbq_setup: configure and initialize HBQs.
+ * lpfc_sli_hbq_setup - configure and initialize HBQs
* @phba: Pointer to HBA context object.
*
* This function is called during the SLI initialization to configure
}
/**
- * lpfc_sli_config_port: Issue config port mailbox command.
+ * lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
/**
- * lpfc_sli_hba_setup: SLI intialization function.
+ * lpfc_sli_hba_setup - SLI intialization function
* @phba: Pointer to HBA context object.
*
* This function is the main SLI intialization function. This function
/**
- * lpfc_mbox_timeout: Timeout call back function for mbox timer.
+ * lpfc_mbox_timeout - Timeout call back function for mbox timer
* @ptr: context object - pointer to hba structure.
*
* This is the callback function for mailbox timer. The mailbox
/**
- * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout.
+ * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout
* @phba: Pointer to HBA context object.
*
* This function is called from worker thread when a mailbox command times out.
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
+ /* Check the pmbox pointer first. There is a race condition
+ * between the mbox timeout handler getting executed in the
+ * worklist and the mailbox actually completing. When this
+ * race condition occurs, the mbox_active will be NULL.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (pmbox == NULL) {
+ lpfc_printf_log(phba, KERN_WARNING,
+ LOG_MBOX | LOG_SLI,
+ "0353 Active Mailbox cleared - mailbox timeout "
+ "exiting\n");
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
/* Mbox cmd <mbxCommand> timeout */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
phba->pport->port_state,
phba->sli.sli_flag,
phba->sli.mbox_active);
+ spin_unlock_irq(&phba->hbalock);
/* Setting state unknown so lpfc_sli_abort_iocb_ring
* would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
}
/**
- * lpfc_sli_issue_mbox: Issue a mailbox command to firmware.
+ * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
goto out_not_finished;
}
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ goto out_not_finished;
+ }
+
psli = &phba->sli;
mb = &pmbox->mb;
}
/**
- * __lpfc_sli_ringtx_put: Add an iocb to the txq.
+ * __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
}
/**
- * lpfc_sli_next_iocb: Get the next iocb in the txq.
+ * lpfc_sli_next_iocb - Get the next iocb in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
}
/**
- * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb.
+ * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
if (unlikely(pci_channel_offline(phba->pcidev)))
return IOCB_ERROR;
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT))
+ return IOCB_ERROR;
+
/*
* We should never get an IOCB if we are in a < LINK_DOWN state
*/
/**
- * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb.
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
}
/**
- * lpfc_extra_ring_setup: Extra ring setup function.
+ * lpfc_extra_ring_setup - Extra ring setup function
* @phba: Pointer to HBA context object.
*
* This function is called while driver attaches with the
}
/**
- * lpfc_sli_async_event_handler: ASYNC iocb handler function.
+ * lpfc_sli_async_event_handler - ASYNC iocb handler function
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocbq: Pointer to iocb object.
uint16_t temp;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
+ uint32_t *iocb_w;
icmd = &iocbq->iocb;
evt_code = icmd->un.asyncstat.evt_code;
if ((evt_code != ASYNC_TEMP_WARN) &&
(evt_code != ASYNC_TEMP_SAFE)) {
+ iocb_w = (uint32_t *) icmd;
lpfc_printf_log(phba,
KERN_ERR,
LOG_SLI,
"0346 Ring %d handler: unexpected ASYNC_STATUS"
- " evt_code 0x%x\n",
+ " evt_code 0x%x \n"
+ "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n"
+ "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n"
+ "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n"
+ "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
pring->ringno,
- icmd->un.asyncstat.evt_code);
+ icmd->un.asyncstat.evt_code,
+ iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
+ iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
+ iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
+ iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
+
return;
}
temp_event_data.data = (uint32_t)temp;
/**
- * lpfc_sli_setup: SLI ring setup function.
+ * lpfc_sli_setup - SLI ring setup function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_setup sets up rings of the SLI interface with
}
/**
- * lpfc_sli_queue_setup: Queue initialization function.
+ * lpfc_sli_queue_setup - Queue initialization function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each
}
/**
- * lpfc_sli_host_down: Vport cleanup function.
+ * lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
* lpfc_sli_host_down is called to clean up the resources
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
- iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
return 1;
}
/**
- * lpfc_sli_hba_down: Resource cleanup function for the HBA.
+ * lpfc_sli_hba_down - Resource cleanup function for the HBA
* @phba: Pointer to HBA context object.
*
* This function cleans up all iocb, buffers, mailbox commands
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
LPFC_MBOXQ_t *pmb;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
int i;
unsigned long flags = 0;
}
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
spin_lock_irqsave(&phba->hbalock, flags);
list_splice_init(&phba->elsbuf, &completions);
}
/**
- * lpfc_sli_pcimem_bcopy: SLI memory copy function.
+ * lpfc_sli_pcimem_bcopy - SLI memory copy function
* @srcp: Source memory pointer.
* @destp: Destination memory pointer.
* @cnt: Number of words required to be copied.
/**
- * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq.
+ * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mp: Pointer to driver buffer object.
}
/**
- * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted
- * using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer
* @phba: Pointer to HBA context object.
*
* When HBQ is enabled, buffers are searched based on tags. This function
}
/**
- * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with
- * posted using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: Buffer tag.
}
/**
- * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for
- * unsolicited ct and els events.
+ * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @phys: DMA address of the buffer.
}
/**
- * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs.
+ * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
}
/**
- * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command.
+ * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
}
/**
- * lpfc_sli_issue_abort_iotag: Abort function for a command iocb.
+ * lpfc_sli_issue_abort_iotag - Abort function for a command iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @cmdiocb: Pointer to driver command iocb object.
}
/**
- * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands
- * associated with a vport/SCSI target/lun.
+ * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN
* @iocbq: Pointer to driver iocb object.
* @vport: Pointer to driver virtual port object.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
* @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST
*
- * This function acts as iocb filter for functions which abort or count
+ * This function acts as an iocb filter for functions which abort or count
* all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return
* 0 if the filtering criteria is met for the given iocb and will return
* 1 if the filtering criteria is not met.
}
/**
- * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending.
+ * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending
* @vport: Pointer to virtual port.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
}
/**
- * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted
- * FCP iocb.
+ * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs
* @phba: Pointer to HBA context object
* @cmdiocb: Pointer to command iocb object.
* @rspiocb: Pointer to response iocb object.
}
/**
- * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands
- * pending on a SCSI host(vport)/target/lun.
+ * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN
* @vport: Pointer to virtual port.
* @pring: Pointer to driver SLI ring object.
* @tgt_id: SCSI ID of the target.
}
/**
- * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using
- * lpfc_sli_issue_iocb_wait.
+ * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
* @phba: Pointer to HBA context object.
* @cmdiocbq: Pointer to command iocb.
* @rspiocbq: Pointer to response iocb.
}
/**
- * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands.
+ * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
* @phba: Pointer to HBA context object..
* @pring: Pointer to sli ring.
* @piocb: Pointer to command iocb.
}
/**
- * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox.
+ * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to driver mailbox object.
* @timeout: Timeout in number of seconds.
}
/**
- * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function.
+ * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
* @phba: Pointer to HBA context.
*
* This function is called to cleanup any pending mailbox
}
/**
- * lpfc_sli_check_eratt: check error attention events
+ * lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
* This function is called form timer soft interrupt context to check HBA's
return 0;
}
+ /*
+ * If there is deferred error attention, do not check for error
+ * attention
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+ }
+
/* Read chip Host Attention (HA) register */
ha_copy = readl(phba->HAregaddr);
if (ha_copy & HA_ERATT) {
/* Read host status register to retrieve error event */
lpfc_sli_read_hs(phba);
+
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+
/* Set the driver HA work bitmap */
phba->work_ha |= HA_ERATT;
/* Indicate polling handles this ERATT */
}
/**
- * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver.
+ * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
/* Indicate interrupt handler handles ERATT */
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+
+ /*
+ * If there is deferred error attention, do not check for any
+ * interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear up only attention source related to slow-path */
writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
phba->HAregaddr);
}
}
spin_lock_irqsave(&phba->hbalock, iflag);
- if (work_ha_copy & HA_ERATT)
+ if (work_ha_copy & HA_ERATT) {
lpfc_sli_read_hs(phba);
+ /*
+ * Check if there is a deferred error condition
+ * is active
+ */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+ }
+
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
} /* lpfc_sp_intr_handler */
/**
- * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver.
+ * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
ha_copy = readl(phba->HAregaddr);
/* Clear up only attention source related to fast-path */
spin_lock_irqsave(&phba->hbalock, iflag);
+ /*
+ * If there is deferred error attention, do not check for
+ * any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
} /* lpfc_fp_intr_handler */
/**
- * lpfc_intr_handler: The device-level interrupt handler of lpfc driver.
+ * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+ /*
+ * If there is deferred error attention, do not check for any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear attention sources except link and error attentions */
writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.0"
+#define LPFC_DRIVER_VERSION "8.3.1"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved."
}
/**
- * lpfc_discovery_wait: Wait for driver discovery to quiesce.
+ * lpfc_discovery_wait - Wait for driver discovery to quiesce
* @vport: The virtual port for which this call is being executed.
*
* This driver calls this routine specifically from lpfc_vport_delete
/**
- * lpfc_vport_reset_stat_data: Reset the statistical data for the vport.
+ * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
* @vport: Pointer to vport object.
*
* This function resets the statistical data for the vport. This function
/**
- * lpfc_alloc_bucket: Allocate data buffer required for collecting
- * statistical data.
+ * lpfc_alloc_bucket - Allocate data buffer required for statistical data
* @vport: Pointer to vport object.
*
* This function allocates data buffer required for all the FC
}
/**
- * lpfc_free_bucket: Free data buffer required for collecting
- * statistical data.
+ * lpfc_free_bucket - Free data buffer required for statistical data
* @vport: Pointer to vport object.
*
* Th function frees statistical data buffer of all the FC
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
+ union reply_descriptor {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+ };
+ union reply_descriptor rd;
u32 post_index, post_index_next, completed_cmds;
u8 request_desript_type;
u16 smid;
completed_cmds = 0;
do {
- if (ioc->reply_post_free[post_index].Words == ~0ULL)
+ rd.word = ioc->reply_post_free[post_index].Words;
+ if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
goto out;
reply = 0;
cb_idx = 0xFF;
for (i = 0 ; i < completed_cmds; i++) {
post_index = post_index_next;
/* poison the reply post descriptor */
- ioc->reply_post_free[post_index_next].Words = ~0ULL;
+ ioc->reply_post_free[post_index_next].Words = ULLONG_MAX;
post_index_next = (post_index ==
(ioc->reply_post_queue_depth - 1))
? 0 : post_index + 1;
if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
- if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev,
- DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev,
- DMA_64BIT_MASK)) {
+ if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
+ DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(64))) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
desc = "64";
}
}
- if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
ioc->sge_size = sizeof(Mpi2SGESimple32_t);
desc = "32";
&ioc->scsi_lookup_lock);
}
+/**
+ * _base_display_dell_branding - Disply branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+ char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
+
+ if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
+ return;
+
+ memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ default:
+ sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
+ break;
+ }
+
+ printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
+ " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
+ ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
+ ioc->pdev->subsystem_device);
+}
+
/**
* _base_display_ioc_capabilities - Disply IOC's capabilities.
* @ioc: per adapter object
i++;
}
+ _base_display_dell_branding(ioc);
+
i = 0;
printk("), ");
printk("Capabilities=(");
/* initialize Reply Post Free Queue */
for (i = 0; i < ioc->reply_post_queue_depth; i++)
- ioc->reply_post_free[i].Words = ~0ULL;
+ ioc->reply_post_free[i].Words = ULLONG_MAX;
r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
if (r)
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "00.100.11.16"
-#define MPT2SAS_MAJOR_VERSION 00
+#define MPT2SAS_DRIVER_VERSION "01.100.02.00"
+#define MPT2SAS_MAJOR_VERSION 01
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 11
-#define MPT2SAS_RELEASE_VERSION 16
+#define MPT2SAS_BUILD_VERSION 02
+#define MPT2SAS_RELEASE_VERSION 00
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
+/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
+
/*
* per target private data
*/
static struct fasync_struct *async_queue;
static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
+ u8 *issue_reset);
+
/**
* enum block_state - blocking state
* @NON_BLOCKING: non blocking
void
mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
+ int i;
+ u8 issue_reset;
+
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ _ctl_send_release(ioc, i, &issue_reset);
+ }
break;
case MPT2_IOC_AFTER_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ ioc->diag_buffer_status[i] |=
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ }
break;
}
}
if (tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- if (_ctl_do_task_abort(ioc, &karg, tm_request))
+ if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+ mpt2sas_base_free_smid(ioc, smid);
goto out;
+ }
}
mutex_lock(&ioc->tm_cmds.mutex);
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
- strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION,
- MPT2_IOCTL_VERSION_LENGTH);
- karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0';
+ strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
+ strcat(karg.driver_version, "-");
+ strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
}
/**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- * @state - NON_BLOCKING or BLOCKING
+ * _ctl_send_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @issue_reset - specifies whether host reset is required.
*
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
*/
-static long
-_ctl_diag_release(void __user *arg, enum block_state state)
+static int
+_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
{
- struct mpt2_diag_release karg;
- struct MPT2SAS_ADAPTER *ioc;
- void *request_data;
- int rc;
Mpi2DiagReleaseRequest_t *mpi_request;
Mpi2DiagReleaseReply_t *mpi_reply;
- u8 buffer_type;
- unsigned long timeleft;
u16 smid;
u16 ioc_status;
- u8 issue_reset = 0;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
- return -ENODEV;
+ u32 ioc_state;
+ int rc;
+ unsigned long timeleft;
dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- if (ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
- "is already released\n", ioc->name, __func__,
- buffer_type);
- return 0;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
+ rc = 0;
+ *issue_reset = 0;
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "skipping due to FAULT state\n", ioc->name,
+ __func__));
+ rc = -EAGAIN;
+ goto out;
}
- if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
- return -EAGAIN;
- else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
- return -ERESTARTSYS;
-
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
goto out;
}
- rc = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagReleaseRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ *issue_reset = 1;
+ rc = -EFAULT;
+ goto out;
}
/* process the completed Reply Message Frame */
rc = -EFAULT;
}
- issue_host_reset:
+ out:
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_release karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ int rc;
+ u8 buffer_type;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "is already released\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ /* buffers were released by due to host reset */
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_RELEASED;
+ ioc->diag_buffer_status[buffer_type] &=
+ ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "was released due to host reset\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
+
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- out:
-
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
#endif
#define MPT2SAS_DEV_NAME "mpt2ctl"
-#define MPT2_MAGIC_NUMBER 'm'
+#define MPT2_MAGIC_NUMBER 'L'
#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
/**
/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
+#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)
/* application flags for mpt2_diag_register, mpt2_diag_query */
#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
*/
struct fw_event_work {
struct list_head list;
- struct delayed_work work;
+ struct work_struct work;
struct MPT2SAS_ADAPTER *ioc;
u8 VF_ID;
u8 host_reset_handling;
handle = sas_device->handle;
parent_handle = sas_device->parent_handle;
sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
_scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
- _scsih_sas_device_remove(ioc, sas_device);
- }
}
/**
rphy = dev_to_rphy(starget->dev.parent);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
rphy->identify.sas_address);
- if (sas_device)
+ if (sas_device && (sas_device->starget == starget) &&
+ (sas_device->id == starget->id) &&
+ (sas_device->channel == starget->channel))
sas_device->starget = NULL;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
spin_lock_irqsave(&ioc->fw_event_lock, flags);
list_add_tail(&fw_event->list, &ioc->fw_event_list);
- INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1);
+ INIT_WORK(&fw_event->work, _firmware_event_work);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
return;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
struct sense_info data;
const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
smid);
- memcpy(scmd->sense_buffer, sense_data,
+ u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
le32_to_cpu(mpi_reply->SenseCount));
+ memcpy(scmd->sense_buffer, sense_data, sz);
_scsih_normalize_sense(scmd->sense_buffer, &data);
/* failure prediction threshold exceeded */
if (data.asc == 0x5D)
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
- termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
continue;
mpt2sas_scsih_issue_tm(ioc, handle, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+ MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
termination_count += le32_to_cpu(mpi_reply->TerminationCount);
}
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
ioc->broadcast_aen_busy = 0;
mutex_unlock(&ioc->tm_cmds.mutex);
_firmware_event_work(struct work_struct *work)
{
struct fw_event_work *fw_event = container_of(work,
- struct fw_event_work, work.work);
+ struct fw_event_work, work);
unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
osdv2_attr_list_elem_size(len);
}
+static void _osd_req_alist_elem_encode(struct osd_request *or,
+ void *attr_last, const struct osd_attr *oa)
+{
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ } else {
+ struct osdv2_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ }
+}
+
+static int _osd_req_alist_elem_decode(struct osd_request *or,
+ void *cur_p, struct osd_attr *oa, unsigned max_bytes)
+{
+ unsigned inc;
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD1: On empty attributes we return a pointer to 2 bytes
+ * of zeros. This keeps similar behaviour with OSD2.
+ * (See below)
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val :
+ (u8 *)&attr->attr_bytes;
+ } else {
+ struct osdv2_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD2: For convenience, on empty attributes, we return 8 bytes
+ * of zeros here. This keeps the same behaviour with OSD2r04,
+ * and is nice with null terminating ASCII fields.
+ * oa->val_ptr == NULL marks the end-of-list, or error.
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved;
+ }
+ return inc;
+}
+
static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head)
{
return osd_req_is_ver1(or) ?
struct osd_cdb *ocdb = &or->cdb;
if (osd_req_is_ver1(or))
- return &ocdb->v1.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v1.sec_params;
else
- return &ocdb->v2.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v2.sec_params;
}
void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device)
WARN_ON(or->in.bio);
bio = bio_map_kern(q, list, len, or->alloc_flags);
- if (!bio) {
+ if (IS_ERR(bio)) {
OSD_ERR("!!! Failed to allocate list_objects BIO\n");
- return -ENOMEM;
+ return PTR_ERR(bio);
}
bio->bi_rw &= ~(1 << BIO_RW);
attr_last = or->set_attr.buff + total_bytes;
for (; nelem; --nelem) {
- struct osd_attributes_list_element *attr;
unsigned elem_size = _osd_req_alist_elem_size(or, oa->len);
total_bytes += elem_size;
or->set_attr.buff + or->set_attr.total_bytes;
}
- attr = attr_last;
- attr->attr_page = cpu_to_be32(oa->attr_page);
- attr->attr_id = cpu_to_be32(oa->attr_id);
- attr->attr_bytes = cpu_to_be16(oa->len);
- memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ _osd_req_alist_elem_encode(or, attr_last, oa);
attr_last += elem_size;
++oa;
}
for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) {
- struct osd_attributes_list_element *attr = cur_p;
- unsigned inc;
+ int inc = _osd_req_alist_elem_decode(or, cur_p, oa,
+ returned_bytes - cur_bytes);
- oa->len = be16_to_cpu(attr->attr_bytes);
- inc = _osd_req_alist_elem_size(or, oa->len);
- OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n",
- oa->len, inc, cur_bytes);
- cur_bytes += inc;
- if (cur_bytes > returned_bytes) {
+ if (inc < 0) {
OSD_ERR("BAD FOOD from target. list not valid!"
"c=%d r=%d n=%d\n",
cur_bytes, returned_bytes, n);
break;
}
- oa->attr_page = be32_to_cpu(attr->attr_page);
- oa->attr_id = be32_to_cpu(attr->attr_id);
- oa->val_ptr = attr->attr_val;
-
+ cur_bytes += inc;
cur_p += inc;
++oa;
}
return ret;
}
+static inline void osd_sec_parms_set_out_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_out_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_out_integrity_check_offset = offset;
+}
+
+static inline void osd_sec_parms_set_in_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_in_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_in_integrity_check_offset = offset;
+}
+
static int _osd_req_finalize_data_integrity(struct osd_request *or,
bool has_in, bool has_out, const u8 *cap_key)
{
or->out_data_integ.get_attributes_bytes = cpu_to_be64(
or->enc_get_attr.total_bytes);
- sec_parms->data_out_integrity_check_offset =
- osd_req_encode_offset(or, or->out.total_bytes, &pad);
+ osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->out.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->out.last_seg,
&or->out);
};
unsigned pad;
- sec_parms->data_in_integrity_check_offset =
- osd_req_encode_offset(or, or->in.total_bytes, &pad);
+ osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->in.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->in.last_seg,
&or->in);
.unlocked_ioctl = osd_uld_ioctl,
};
-struct osd_dev *osduld_path_lookup(const char *path)
+struct osd_dev *osduld_path_lookup(const char *name)
{
- struct nameidata nd;
+ struct path path;
struct inode *inode;
struct cdev *cdev;
struct osd_uld_device *uninitialized_var(oud);
int error;
- if (!path || !*path) {
+ if (!name || !*name) {
OSD_ERR("Mount with !path || !*path\n");
return ERR_PTR(-EINVAL);
}
- error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+ error = kern_path(name, LOOKUP_FOLLOW, &path);
if (error) {
- OSD_ERR("path_lookup of %s faild=>%d\n", path, error);
+ OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
return ERR_PTR(error);
}
- inode = nd.path.dentry->d_inode;
+ inode = path.dentry->d_inode;
error = -EINVAL; /* Not the right device e.g osd_uld_device */
if (!S_ISCHR(inode->i_mode)) {
OSD_DEBUG("!S_ISCHR()\n");
cdev = inode->i_cdev;
if (!cdev) {
OSD_ERR("Before mounting an OSD Based filesystem\n");
- OSD_ERR(" user-mode must open+close the %s device\n", path);
- OSD_ERR(" Example: bash: echo < %s\n", path);
+ OSD_ERR(" user-mode must open+close the %s device\n", name);
+ OSD_ERR(" Example: bash: echo < %s\n", name);
goto out;
}
/* The Magic wand. Is it our char-dev */
/* TODO: Support sg devices */
if (cdev->owner != THIS_MODULE) {
- OSD_ERR("Error mounting %s - is not an OSD device\n", path);
+ OSD_ERR("Error mounting %s - is not an OSD device\n", name);
goto out;
}
error = 0;
out:
- path_put(&nd.path);
+ path_put(&path);
return error ? ERR_PTR(error) : &oud->od;
}
EXPORT_SYMBOL(osduld_path_lookup);
/* Load RISC code. */
risc_address = ha->fwstart;
- fw_data = (const __le16 *)&fw->data[4];
+ fw_data = (const __le16 *)&fw->data[6];
risc_code_size = (fw->size - 6) / 2;
for (i = 0; i < risc_code_size; i++) {
/* Load RISC code. */
risc_address = ha->fwstart;
- fw_data = (const __le16 *)&fw->data[4];
+ fw_data = (const __le16 *)&fw->data[6];
risc_code_size = (fw->size - 6) / 2;
dprintk(1, "%s: DMA RISC code (%i) words\n",
if (--starget->target_blocked == 0) {
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
- } else {
- blk_plug_device(sdev->request_queue);
+ } else
return 0;
- }
}
if (scsi_target_is_busy(starget)) {
{ };
#endif
-/* scsi_scan.c */
-int scsi_complete_async_scans(void);
-
/* scsi_devinfo.c */
extern int scsi_get_device_flags(struct scsi_device *sdev,
const unsigned char *vendor,
spin_unlock(&async_scan_lock);
kfree(data);
- /* Synchronize async operations globally */
- async_synchronize_full();
return 0;
}
INIT_LIST_HEAD(&starget->devices);
starget->state = STARGET_CREATED;
starget->scsi_level = SCSI_2;
+ starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
retry:
spin_lock_irqsave(shost->host_lock, flags);
err = 0;
break;
case ISCSI_SESSION_FAILED:
- err = DID_TRANSPORT_DISRUPTED << 16;
+ err = DID_IMM_RETRY << 16;
break;
case ISCSI_SESSION_FREE:
err = DID_TRANSPORT_FAILFAST << 16;
*/
#include <linux/module.h>
-#include "scsi_priv.h"
+#include <linux/device.h>
+#include <scsi/scsi_scan.h>
static int __init wait_scan_init(void)
{
+ /*
+ * First we need to wait for device probing to finish;
+ * the drivers we just loaded might just still be probing
+ * and might not yet have reached the scsi async scanning
+ */
+ wait_for_device_probe();
+ /*
+ * and then we wait for the actual asynchronous scsi scan
+ * to finish.
+ */
scsi_complete_async_scans();
return 0;
}
#include <linux/string_helpers.h>
#include <linux/async.h>
#include <asm/uaccess.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
return -EINVAL;
}
- sector_size = (buffer[8] << 24) | (buffer[9] << 16) |
- (buffer[10] << 8) | buffer[11];
- lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) |
- ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) |
- ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) |
- ((u64)buffer[6] << 8) | (u64)buffer[7]);
+ sector_size = get_unaligned_be32(&buffer[8]);
+ lba = get_unaligned_be64(&buffer[0]);
sd_read_protection_type(sdkp, buffer);
return -EINVAL;
}
- sector_size = (buffer[4] << 24) | (buffer[5] << 16) |
- (buffer[6] << 8) | buffer[7];
- lba = (buffer[0] << 24) | (buffer[1] << 16) |
- (buffer[2] << 8) | buffer[3];
+ sector_size = get_unaligned_be32(&buffer[4]);
+ lba = get_unaligned_be32(&buffer[0]);
if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
/* tasklet or soft irq callback */
static void sg_rq_end_io(struct request *rq, int uptodate);
static int sg_start_req(Sg_request *srp, unsigned char *cmd);
-static void sg_finish_rem_req(Sg_request * srp);
+static int sg_finish_rem_req(Sg_request * srp);
static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size);
static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count,
Sg_request * srp);
goto err_out;
}
err_out:
- sg_finish_rem_req(srp);
+ err = sg_finish_rem_req(srp);
return (0 == err) ? count : err;
}
return res;
}
-static void
-sg_finish_rem_req(Sg_request * srp)
+static int sg_finish_rem_req(Sg_request * srp)
{
+ int ret = 0;
+
Sg_fd *sfp = srp->parentfp;
Sg_scatter_hold *req_schp = &srp->data;
if (srp->rq) {
if (srp->bio)
- blk_rq_unmap_user(srp->bio);
+ ret = blk_rq_unmap_user(srp->bio);
blk_put_request(srp->rq);
}
sg_remove_request(sfp, srp);
+
+ return ret;
}
static int
if (0 == sr_test_unit_ready(cd->device, &sshdr))
return CDS_DISC_OK;
+ /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */
+ if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
+ && sshdr.asc == 0x04 && sshdr.ascq == 0x01)
+ return CDS_DRIVE_NOT_READY;
+
if (!cdrom_get_media_event(cdi, &med)) {
if (med.media_present)
return CDS_DISC_OK;
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
/*
* Some bits in registers are cleared on a read, so they must
static void set_io_from_upio(struct uart_port *p)
{
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
p->serial_out = io_serial_out;
break;
}
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
}
static void
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (up->port.type == PORT_16C950) {
/* Wake up and initialize UART */
up->acr = 0;
if (ret < 0)
probeflags &= ~PROBE_RSA;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
{
int i;
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
serial8250_isa_init_ports();
for (i = 0; i < nr_uarts; i++) {
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
printk(KERN_INFO
- "Serial: device 0x%lx not configured.\n"
+ "Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
- dev->hpa.start);
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
}
/*
- * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
- *
* These chips are available with optionally one parallel port and up to
* two serial ports. Unfortunately they all have the same product id.
*
config SERIAL_UARTLITE
tristate "Xilinx uartlite serial port support"
- depends on PPC32
+ depends on PPC32 || MICROBLAZE
select SERIAL_CORE
help
Say Y here if you want to use the Xilinx uartlite serial controller.
config SERIAL_OF_PLATFORM
tristate "Serial port on Open Firmware platform bus"
- depends on PPC_OF
+ depends on PPC_OF || MICROBLAZE
depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
help
If you have a PowerPC based system that has serial ports
.cons = AMBA_CONSOLE,
};
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
.cons = AMBA_CONSOLE,
};
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
struct tty_struct *tty = uart->port.info->port.tty;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
struct bfin_serial_port *uart = dev_id;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
struct circ_buf *xmit = &uart->port.info->xmit;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
-#include <linux/delay.h>
#include <arch/svinto.h>
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct ktermios *serial_termios[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
return 0;
}
+#ifdef CONFIG_PROC_FS
/*
* /proc fs routines....
*/
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
{
- char stat_buf[30];
- int ret;
unsigned long tmp;
- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->ioport, info->irq);
+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->ioport, info->irq);
if (!info->ioport || (info->type == PORT_UNKNOWN)) {
- ret += sprintf(buf+ret, "\n");
- return ret;
+ seq_printf(m, "\n");
+ return;
}
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (!E100_RTS_GET(info))
- strcat(stat_buf, "|RTS");
- if (!E100_CTS_GET(info))
- strcat(stat_buf, "|CTS");
- if (!E100_DTR_GET(info))
- strcat(stat_buf, "|DTR");
- if (!E100_DSR_GET(info))
- strcat(stat_buf, "|DSR");
- if (!E100_CD_GET(info))
- strcat(stat_buf, "|CD");
- if (!E100_RI_GET(info))
- strcat(stat_buf, "|RI");
-
- ret += sprintf(buf+ret, " baud:%d", info->baud);
-
- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ seq_printf(m, " baud:%d", info->baud);
+ seq_printf(m, " tx:%lu rx:%lu",
(unsigned long)info->icount.tx,
(unsigned long)info->icount.rx);
tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
- if (tmp) {
- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
- (unsigned long)tmp,
- (unsigned long)SERIAL_XMIT_SIZE);
- }
+ if (tmp)
+ seq_printf(m, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
- (unsigned long)info->recv_cnt,
- (unsigned long)info->max_recv_cnt);
+ seq_printf(m, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
#if 1
if (info->port.tty) {
-
if (info->port.tty->stopped)
- ret += sprintf(buf+ret, " stopped:%i",
- (int)info->port.tty->stopped);
+ seq_printf(m, " stopped:%i",
+ (int)info->port.tty->stopped);
if (info->port.tty->hw_stopped)
- ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
+ seq_printf(m, " hw_stopped:%i",
+ (int)info->port.tty->hw_stopped);
}
{
unsigned char rstat = info->ioport[REG_STATUS];
- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
- ret += sprintf(buf+ret, " xoff_detect:1");
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+ seq_printf(m, " xoff_detect:1");
}
#endif
-
-
-
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%lu",
- (unsigned long)info->icount.frame);
+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%lu",
- (unsigned long)info->icount.parity);
+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%lu",
- (unsigned long)info->icount.brk);
+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%lu",
- (unsigned long)info->icount.overrun);
+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ if (!E100_RTS_GET(info))
+ seq_puts(m, "|RTS");
+ if (!E100_CTS_GET(info))
+ seq_puts(m, "|CTS");
+ if (!E100_DTR_GET(info))
+ seq_puts(m, "|DTR");
+ if (!E100_DSR_GET(info))
+ seq_puts(m, "|DSR");
+ if (!E100_CD_GET(info))
+ seq_puts(m, "|CD");
+ if (!E100_RI_GET(info))
+ seq_puts(m, "|RI");
+ seq_puts(m, "\n");
}
-int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver:%s\n",
- serial_version);
- for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+ for (i = 0; i < NR_PORTS; i++) {
if (!rs_table[i].enabled)
continue;
- l = line_info(page + len, &rs_table[i]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_line_info(m, &rs_table[i]);
}
#ifdef DEBUG_LOG_INCLUDED
for (i = 0; i < debug_log_pos; i++) {
- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_printf(m, "%-4i %lu.%lu ",
+ i, debug_log[i].time,
+ timer_data_to_ns(debug_log[i].timer_data));
+ seq_printf(m, debug_log[i].string, debug_log[i].value);
}
- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
- i, DEBUG_LOG_SIZE, begin+len);
+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
debug_log_pos = 0;
#endif
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, crisv10_proc_show, NULL);
}
+static const struct file_operations crisv10_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = crisv10_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+
/* Finally, routines used to initialize the serial driver. */
-static void
-show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO
- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ "ETRAX 100LX serial-driver %s, "
+ "(c) 2000-2004 Axis Communications AB\r\n",
&serial_version[11]); /* "$Revision: x.yy" */
}
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
- .tiocmset = rs_tiocmset
+ .tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &crisv10_proc_fops,
+#endif
};
-static int __init
-rs_init(void)
+static int __init rs_init(void)
{
int i;
struct e100_serial *info;
free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
iounmap(icom_adapter->base_addr);
- icom_free_adapter(icom_adapter);
pci_release_regions(icom_adapter->pci_dev);
+ icom_free_adapter(icom_adapter);
}
static void icom_kref_release(struct kref *kref)
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
struct pci_dev *pci_dev;
u32 maxports; /* MAX ports this board can handle */
- spinlock_t bd_lock; /* Used to protect board */
-
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
* the interrupt routine from each other.
*/
else
brd->maxports = 2;
- spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
--- /dev/null
+/*
+ *
+ * Copyright (C) 2008 Christian Pellegrin <chripell@evolware.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have
+ * to use polling for flow control. TX empty IRQ is unusable, since
+ * writing conf clears FIFO buffer and we cannot have this interrupt
+ * always asking us for attention.
+ *
+ * Example platform data:
+
+ static struct plat_max3100 max3100_plat_data = {
+ .loopback = 0,
+ .crystal = 0,
+ .poll_time = 100,
+ };
+
+ static struct spi_board_info spi_board_info[] = {
+ {
+ .modalias = "max3100",
+ .platform_data = &max3100_plat_data,
+ .irq = IRQ_EINT12,
+ .max_speed_hz = 5*1000*1000,
+ .chip_select = 0,
+ },
+ };
+
+ * The initial minor number is 209 in the low-density serial port:
+ * mknod /dev/ttyMAX0 c 204 209
+ */
+
+#define MAX3100_MAJOR 204
+#define MAX3100_MINOR 209
+/* 4 MAX3100s should be enough for everyone */
+#define MAX_MAX3100 4
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/freezer.h>
+
+#include <linux/serial_max3100.h>
+
+#define MAX3100_C (1<<14)
+#define MAX3100_D (0<<14)
+#define MAX3100_W (1<<15)
+#define MAX3100_RX (0<<15)
+
+#define MAX3100_WC (MAX3100_W | MAX3100_C)
+#define MAX3100_RC (MAX3100_RX | MAX3100_C)
+#define MAX3100_WD (MAX3100_W | MAX3100_D)
+#define MAX3100_RD (MAX3100_RX | MAX3100_D)
+#define MAX3100_CMD (3 << 14)
+
+#define MAX3100_T (1<<14)
+#define MAX3100_R (1<<15)
+
+#define MAX3100_FEN (1<<13)
+#define MAX3100_SHDN (1<<12)
+#define MAX3100_TM (1<<11)
+#define MAX3100_RM (1<<10)
+#define MAX3100_PM (1<<9)
+#define MAX3100_RAM (1<<8)
+#define MAX3100_IR (1<<7)
+#define MAX3100_ST (1<<6)
+#define MAX3100_PE (1<<5)
+#define MAX3100_L (1<<4)
+#define MAX3100_BAUD (0xf)
+
+#define MAX3100_TE (1<<10)
+#define MAX3100_RAFE (1<<10)
+#define MAX3100_RTS (1<<9)
+#define MAX3100_CTS (1<<9)
+#define MAX3100_PT (1<<8)
+#define MAX3100_DATA (0xff)
+
+#define MAX3100_RT (MAX3100_R | MAX3100_T)
+#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE)
+
+/* the following simulate a status reg for ignore_status_mask */
+#define MAX3100_STATUS_PE 1
+#define MAX3100_STATUS_FE 2
+#define MAX3100_STATUS_OE 4
+
+struct max3100_port {
+ struct uart_port port;
+ struct spi_device *spi;
+
+ int cts; /* last CTS received for flow ctrl */
+ int tx_empty; /* last TX empty bit */
+
+ spinlock_t conf_lock; /* shared data */
+ int conf_commit; /* need to make changes */
+ int conf; /* configuration for the MAX31000
+ * (bits 0-7, bits 8-11 are irqs) */
+ int rts_commit; /* need to change rts */
+ int rts; /* rts status */
+ int baud; /* current baud rate */
+
+ int parity; /* keeps track if we should send parity */
+#define MAX3100_PARITY_ON 1
+#define MAX3100_PARITY_ODD 2
+#define MAX3100_7BIT 4
+ int rx_enabled; /* if we should rx chars */
+
+ int irq; /* irq assigned to the max3100 */
+
+ int minor; /* minor number */
+ int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */
+ int loopback; /* 1 if we are in loopback mode */
+
+ /* for handling irqs: need workqueue since we do spi_sync */
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+ /* set to 1 to make the workhandler exit as soon as possible */
+ int force_end_work;
+ /* need to know we are suspending to avoid deadlock on workqueue */
+ int suspending;
+
+ /* hook for suspending MAX3100 via dedicated pin */
+ void (*max3100_hw_suspend) (int suspend);
+
+ /* poll time (in ms) for ctrl lines */
+ int poll_time;
+ /* and its timer */
+ struct timer_list timer;
+};
+
+static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */
+static DEFINE_MUTEX(max3100s_lock); /* race on probe */
+
+static int max3100_do_parity(struct max3100_port *s, u16 c)
+{
+ int parity;
+
+ if (s->parity & MAX3100_PARITY_ODD)
+ parity = 1;
+ else
+ parity = 0;
+
+ if (s->parity & MAX3100_7BIT)
+ c &= 0x7f;
+ else
+ c &= 0xff;
+
+ parity = parity ^ (hweight8(c) & 1);
+ return parity;
+}
+
+static int max3100_check_parity(struct max3100_port *s, u16 c)
+{
+ return max3100_do_parity(s, c) == ((c >> 8) & 1);
+}
+
+static void max3100_calc_parity(struct max3100_port *s, u16 *c)
+{
+ if (s->parity & MAX3100_7BIT)
+ *c &= 0x7f;
+ else
+ *c &= 0xff;
+
+ if (s->parity & MAX3100_PARITY_ON)
+ *c |= max3100_do_parity(s, *c) << 8;
+}
+
+static void max3100_work(struct work_struct *w);
+
+static void max3100_dowork(struct max3100_port *s)
+{
+ if (!s->force_end_work && !work_pending(&s->work) &&
+ !freezing(current) && !s->suspending)
+ queue_work(s->workqueue, &s->work);
+}
+
+static void max3100_timeout(unsigned long data)
+{
+ struct max3100_port *s = (struct max3100_port *)data;
+
+ if (s->port.info) {
+ max3100_dowork(s);
+ mod_timer(&s->timer, jiffies + s->poll_time);
+ }
+}
+
+static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx)
+{
+ struct spi_message message;
+ u16 etx, erx;
+ int status;
+ struct spi_transfer tran = {
+ .tx_buf = &etx,
+ .rx_buf = &erx,
+ .len = 2,
+ };
+
+ etx = cpu_to_be16(tx);
+ spi_message_init(&message);
+ spi_message_add_tail(&tran, &message);
+ status = spi_sync(s->spi, &message);
+ if (status) {
+ dev_warn(&s->spi->dev, "error while calling spi_sync\n");
+ return -EIO;
+ }
+ *rx = be16_to_cpu(erx);
+ s->tx_empty = (*rx & MAX3100_T) > 0;
+ dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx);
+ return 0;
+}
+
+static int max3100_handlerx(struct max3100_port *s, u16 rx)
+{
+ unsigned int ch, flg, status = 0;
+ int ret = 0, cts;
+
+ if (rx & MAX3100_R && s->rx_enabled) {
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+ ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff);
+ if (rx & MAX3100_RAFE) {
+ s->port.icount.frame++;
+ flg = TTY_FRAME;
+ status |= MAX3100_STATUS_FE;
+ } else {
+ if (s->parity & MAX3100_PARITY_ON) {
+ if (max3100_check_parity(s, rx)) {
+ s->port.icount.rx++;
+ flg = TTY_NORMAL;
+ } else {
+ s->port.icount.parity++;
+ flg = TTY_PARITY;
+ status |= MAX3100_STATUS_PE;
+ }
+ } else {
+ s->port.icount.rx++;
+ flg = TTY_NORMAL;
+ }
+ }
+ uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg);
+ ret = 1;
+ }
+
+ cts = (rx & MAX3100_CTS) > 0;
+ if (s->cts != cts) {
+ s->cts = cts;
+ uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0);
+ }
+
+ return ret;
+}
+
+static void max3100_work(struct work_struct *w)
+{
+ struct max3100_port *s = container_of(w, struct max3100_port, work);
+ int rxchars;
+ u16 tx, rx;
+ int conf, cconf, rts, crts;
+ struct circ_buf *xmit = &s->port.info->xmit;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ rxchars = 0;
+ do {
+ spin_lock(&s->conf_lock);
+ conf = s->conf;
+ cconf = s->conf_commit;
+ s->conf_commit = 0;
+ rts = s->rts;
+ crts = s->rts_commit;
+ s->rts_commit = 0;
+ spin_unlock(&s->conf_lock);
+ if (cconf)
+ max3100_sr(s, MAX3100_WC | conf, &rx);
+ if (crts) {
+ max3100_sr(s, MAX3100_WD | MAX3100_TE |
+ (s->rts ? MAX3100_RTS : 0), &rx);
+ rxchars += max3100_handlerx(s, rx);
+ }
+
+ max3100_sr(s, MAX3100_RD, &rx);
+ rxchars += max3100_handlerx(s, rx);
+
+ if (rx & MAX3100_T) {
+ tx = 0xffff;
+ if (s->port.x_char) {
+ tx = s->port.x_char;
+ s->port.icount.tx++;
+ s->port.x_char = 0;
+ } else if (!uart_circ_empty(xmit) &&
+ !uart_tx_stopped(&s->port)) {
+ tx = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ s->port.icount.tx++;
+ }
+ if (tx != 0xffff) {
+ max3100_calc_parity(s, &tx);
+ tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0);
+ max3100_sr(s, tx, &rx);
+ rxchars += max3100_handlerx(s, rx);
+ }
+ }
+
+ if (rxchars > 16 && s->port.info->port.tty != NULL) {
+ tty_flip_buffer_push(s->port.info->port.tty);
+ rxchars = 0;
+ }
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&s->port);
+
+ } while (!s->force_end_work &&
+ !freezing(current) &&
+ ((rx & MAX3100_R) ||
+ (!uart_circ_empty(xmit) &&
+ !uart_tx_stopped(&s->port))));
+
+ if (rxchars > 0 && s->port.info->port.tty != NULL)
+ tty_flip_buffer_push(s->port.info->port.tty);
+}
+
+static irqreturn_t max3100_irq(int irqno, void *dev_id)
+{
+ struct max3100_port *s = dev_id;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ max3100_dowork(s);
+ return IRQ_HANDLED;
+}
+
+static void max3100_enable_ms(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ if (s->poll_time > 0)
+ mod_timer(&s->timer, jiffies);
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static void max3100_start_tx(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ max3100_dowork(s);
+}
+
+static void max3100_stop_rx(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ s->rx_enabled = 0;
+ spin_lock(&s->conf_lock);
+ s->conf &= ~MAX3100_RM;
+ s->conf_commit = 1;
+ spin_unlock(&s->conf_lock);
+ max3100_dowork(s);
+}
+
+static unsigned int max3100_tx_empty(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ /* may not be truly up-to-date */
+ max3100_dowork(s);
+ return s->tx_empty;
+}
+
+static unsigned int max3100_get_mctrl(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ /* may not be truly up-to-date */
+ max3100_dowork(s);
+ /* always assert DCD and DSR since these lines are not wired */
+ return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ int rts;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ rts = (mctrl & TIOCM_RTS) > 0;
+
+ spin_lock(&s->conf_lock);
+ if (s->rts != rts) {
+ s->rts = rts;
+ s->rts_commit = 1;
+ max3100_dowork(s);
+ }
+ spin_unlock(&s->conf_lock);
+}
+
+static void
+max3100_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ int baud = 0;
+ unsigned cflag;
+ u32 param_new, param_mask, parity = 0;
+ struct tty_struct *tty = s->port.info->port.tty;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+ if (!tty)
+ return;
+
+ cflag = termios->c_cflag;
+ param_new = 0;
+ param_mask = 0;
+
+ baud = tty_get_baud_rate(tty);
+ param_new = s->conf & MAX3100_BAUD;
+ switch (baud) {
+ case 300:
+ if (s->crystal)
+ baud = s->baud;
+ else
+ param_new = 15;
+ break;
+ case 600:
+ param_new = 14 + s->crystal;
+ break;
+ case 1200:
+ param_new = 13 + s->crystal;
+ break;
+ case 2400:
+ param_new = 12 + s->crystal;
+ break;
+ case 4800:
+ param_new = 11 + s->crystal;
+ break;
+ case 9600:
+ param_new = 10 + s->crystal;
+ break;
+ case 19200:
+ param_new = 9 + s->crystal;
+ break;
+ case 38400:
+ param_new = 8 + s->crystal;
+ break;
+ case 57600:
+ param_new = 1 + s->crystal;
+ break;
+ case 115200:
+ param_new = 0 + s->crystal;
+ break;
+ case 230400:
+ if (s->crystal)
+ param_new = 0;
+ else
+ baud = s->baud;
+ break;
+ default:
+ baud = s->baud;
+ }
+ tty_encode_baud_rate(tty, baud, baud);
+ s->baud = baud;
+ param_mask |= MAX3100_BAUD;
+
+ if ((cflag & CSIZE) == CS8) {
+ param_new &= ~MAX3100_L;
+ parity &= ~MAX3100_7BIT;
+ } else {
+ param_new |= MAX3100_L;
+ parity |= MAX3100_7BIT;
+ cflag = (cflag & ~CSIZE) | CS7;
+ }
+ param_mask |= MAX3100_L;
+
+ if (cflag & CSTOPB)
+ param_new |= MAX3100_ST;
+ else
+ param_new &= ~MAX3100_ST;
+ param_mask |= MAX3100_ST;
+
+ if (cflag & PARENB) {
+ param_new |= MAX3100_PE;
+ parity |= MAX3100_PARITY_ON;
+ } else {
+ param_new &= ~MAX3100_PE;
+ parity &= ~MAX3100_PARITY_ON;
+ }
+ param_mask |= MAX3100_PE;
+
+ if (cflag & PARODD)
+ parity |= MAX3100_PARITY_ODD;
+ else
+ parity &= ~MAX3100_PARITY_ODD;
+
+ /* mask termios capabilities we don't support */
+ cflag &= ~CMSPAR;
+ termios->c_cflag = cflag;
+
+ s->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ s->port.ignore_status_mask |=
+ MAX3100_STATUS_PE | MAX3100_STATUS_FE |
+ MAX3100_STATUS_OE;
+
+ /* we are sending char from a workqueue so enable */
+ s->port.info->port.tty->low_latency = 1;
+
+ if (s->poll_time > 0)
+ del_timer_sync(&s->timer);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ spin_lock(&s->conf_lock);
+ s->conf = (s->conf & ~param_mask) | (param_new & param_mask);
+ s->conf_commit = 1;
+ s->parity = parity;
+ spin_unlock(&s->conf_lock);
+ max3100_dowork(s);
+
+ if (UART_ENABLE_MS(&s->port, termios->c_cflag))
+ max3100_enable_ms(&s->port);
+}
+
+static void max3100_shutdown(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (s->suspending)
+ return;
+
+ s->force_end_work = 1;
+
+ if (s->poll_time > 0)
+ del_timer_sync(&s->timer);
+
+ if (s->workqueue) {
+ flush_workqueue(s->workqueue);
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ }
+ if (s->irq)
+ free_irq(s->irq, s);
+
+ /* set shutdown mode to save power */
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(1);
+ else {
+ u16 tx, rx;
+
+ tx = MAX3100_WC | MAX3100_SHDN;
+ max3100_sr(s, tx, &rx);
+ }
+}
+
+static int max3100_startup(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ char b[12];
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ s->conf = MAX3100_RM;
+ s->baud = s->crystal ? 230400 : 115200;
+ s->rx_enabled = 1;
+
+ if (s->suspending)
+ return 0;
+
+ s->force_end_work = 0;
+ s->parity = 0;
+ s->rts = 0;
+
+ sprintf(b, "max3100-%d", s->minor);
+ s->workqueue = create_freezeable_workqueue(b);
+ if (!s->workqueue) {
+ dev_warn(&s->spi->dev, "cannot create workqueue\n");
+ return -EBUSY;
+ }
+ INIT_WORK(&s->work, max3100_work);
+
+ if (request_irq(s->irq, max3100_irq,
+ IRQF_TRIGGER_FALLING, "max3100", s) < 0) {
+ dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq);
+ s->irq = 0;
+ destroy_workqueue(s->workqueue);
+ s->workqueue = NULL;
+ return -EBUSY;
+ }
+
+ if (s->loopback) {
+ u16 tx, rx;
+ tx = 0x4001;
+ max3100_sr(s, tx, &rx);
+ }
+
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(0);
+ s->conf_commit = 1;
+ max3100_dowork(s);
+ /* wait for clock to settle */
+ msleep(50);
+
+ max3100_enable_ms(&s->port);
+
+ return 0;
+}
+
+static const char *max3100_type(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL;
+}
+
+static void max3100_release_port(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static void max3100_config_port(struct uart_port *port, int flags)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (flags & UART_CONFIG_TYPE)
+ s->port.type = PORT_MAX3100;
+}
+
+static int max3100_verify_port(struct uart_port *port,
+ struct serial_struct *ser)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+ int ret = -EINVAL;
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100)
+ ret = 0;
+ return ret;
+}
+
+static void max3100_stop_tx(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static int max3100_request_port(struct uart_port *port)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+ return 0;
+}
+
+static void max3100_break_ctl(struct uart_port *port, int break_state)
+{
+ struct max3100_port *s = container_of(port,
+ struct max3100_port,
+ port);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+}
+
+static struct uart_ops max3100_ops = {
+ .tx_empty = max3100_tx_empty,
+ .set_mctrl = max3100_set_mctrl,
+ .get_mctrl = max3100_get_mctrl,
+ .stop_tx = max3100_stop_tx,
+ .start_tx = max3100_start_tx,
+ .stop_rx = max3100_stop_rx,
+ .enable_ms = max3100_enable_ms,
+ .break_ctl = max3100_break_ctl,
+ .startup = max3100_startup,
+ .shutdown = max3100_shutdown,
+ .set_termios = max3100_set_termios,
+ .type = max3100_type,
+ .release_port = max3100_release_port,
+ .request_port = max3100_request_port,
+ .config_port = max3100_config_port,
+ .verify_port = max3100_verify_port,
+};
+
+static struct uart_driver max3100_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "ttyMAX",
+ .dev_name = "ttyMAX",
+ .major = MAX3100_MAJOR,
+ .minor = MAX3100_MINOR,
+ .nr = MAX_MAX3100,
+};
+static int uart_driver_registered;
+
+static int __devinit max3100_probe(struct spi_device *spi)
+{
+ int i, retval;
+ struct plat_max3100 *pdata;
+ u16 tx, rx;
+
+ mutex_lock(&max3100s_lock);
+
+ if (!uart_driver_registered) {
+ uart_driver_registered = 1;
+ retval = uart_register_driver(&max3100_uart_driver);
+ if (retval) {
+ printk(KERN_ERR "Couldn't register max3100 uart driver\n");
+ mutex_unlock(&max3100s_lock);
+ return retval;
+ }
+ }
+
+ for (i = 0; i < MAX_MAX3100; i++)
+ if (!max3100s[i])
+ break;
+ if (i == MAX_MAX3100) {
+ dev_warn(&spi->dev, "too many MAX3100 chips\n");
+ mutex_unlock(&max3100s_lock);
+ return -ENOMEM;
+ }
+
+ max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL);
+ if (!max3100s[i]) {
+ dev_warn(&spi->dev,
+ "kmalloc for max3100 structure %d failed!\n", i);
+ mutex_unlock(&max3100s_lock);
+ return -ENOMEM;
+ }
+ max3100s[i]->spi = spi;
+ max3100s[i]->irq = spi->irq;
+ spin_lock_init(&max3100s[i]->conf_lock);
+ dev_set_drvdata(&spi->dev, max3100s[i]);
+ pdata = spi->dev.platform_data;
+ max3100s[i]->crystal = pdata->crystal;
+ max3100s[i]->loopback = pdata->loopback;
+ max3100s[i]->poll_time = pdata->poll_time * HZ / 1000;
+ if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0)
+ max3100s[i]->poll_time = 1;
+ max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend;
+ max3100s[i]->minor = i;
+ init_timer(&max3100s[i]->timer);
+ max3100s[i]->timer.function = max3100_timeout;
+ max3100s[i]->timer.data = (unsigned long) max3100s[i];
+
+ dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i);
+ max3100s[i]->port.irq = max3100s[i]->irq;
+ max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200;
+ max3100s[i]->port.fifosize = 16;
+ max3100s[i]->port.ops = &max3100_ops;
+ max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
+ max3100s[i]->port.line = i;
+ max3100s[i]->port.type = PORT_MAX3100;
+ max3100s[i]->port.dev = &spi->dev;
+ retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port);
+ if (retval < 0)
+ dev_warn(&spi->dev,
+ "uart_add_one_port failed for line %d with error %d\n",
+ i, retval);
+
+ /* set shutdown mode to save power. Will be woken-up on open */
+ if (max3100s[i]->max3100_hw_suspend)
+ max3100s[i]->max3100_hw_suspend(1);
+ else {
+ tx = MAX3100_WC | MAX3100_SHDN;
+ max3100_sr(max3100s[i], tx, &rx);
+ }
+ mutex_unlock(&max3100s_lock);
+ return 0;
+}
+
+static int __devexit max3100_remove(struct spi_device *spi)
+{
+ struct max3100_port *s = dev_get_drvdata(&spi->dev);
+ int i;
+
+ mutex_lock(&max3100s_lock);
+
+ /* find out the index for the chip we are removing */
+ for (i = 0; i < MAX_MAX3100; i++)
+ if (max3100s[i] == s)
+ break;
+
+ dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i);
+ uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port);
+ kfree(max3100s[i]);
+ max3100s[i] = NULL;
+
+ /* check if this is the last chip we have */
+ for (i = 0; i < MAX_MAX3100; i++)
+ if (max3100s[i]) {
+ mutex_unlock(&max3100s_lock);
+ return 0;
+ }
+ pr_debug("removing max3100 driver\n");
+ uart_unregister_driver(&max3100_uart_driver);
+
+ mutex_unlock(&max3100s_lock);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int max3100_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct max3100_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ disable_irq(s->irq);
+
+ s->suspending = 1;
+ uart_suspend_port(&max3100_uart_driver, &s->port);
+
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(1);
+ else {
+ /* no HW suspend, so do SW one */
+ u16 tx, rx;
+
+ tx = MAX3100_WC | MAX3100_SHDN;
+ max3100_sr(s, tx, &rx);
+ }
+ return 0;
+}
+
+static int max3100_resume(struct spi_device *spi)
+{
+ struct max3100_port *s = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&s->spi->dev, "%s\n", __func__);
+
+ if (s->max3100_hw_suspend)
+ s->max3100_hw_suspend(0);
+ uart_resume_port(&max3100_uart_driver, &s->port);
+ s->suspending = 0;
+
+ enable_irq(s->irq);
+
+ s->conf_commit = 1;
+ if (s->workqueue)
+ max3100_dowork(s);
+
+ return 0;
+}
+
+#else
+#define max3100_suspend NULL
+#define max3100_resume NULL
+#endif
+
+static struct spi_driver max3100_driver = {
+ .driver = {
+ .name = "max3100",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+
+ .probe = max3100_probe,
+ .remove = __devexit_p(max3100_remove),
+ .suspend = max3100_suspend,
+ .resume = max3100_resume,
+};
+
+static int __init max3100_init(void)
+{
+ return spi_register_driver(&max3100_driver);
+}
+module_init(max3100_init);
+
+static void __exit max3100_exit(void)
+{
+ spi_unregister_driver(&max3100_driver);
+}
+module_exit(max3100_exit);
+
+MODULE_DESCRIPTION("MAX3100 driver");
+MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
+MODULE_LICENSE("GPL");
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
co, co->index, options);
- if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
pr_debug("PSC%x out of range\n", co->index);
return -EINVAL;
}
ch = dcr_read(up->dcr_host, UART_RX);
if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
tty_insert_flip_char(tty, ch, TTY_NORMAL);
- } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+ } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
tty_flip_buffer_push(tty);
ret = IRQ_HANDLED;
+ /* clear interrupt */
+ dcr_write(up->dcr_host, UART_IIR, 1);
out:
spin_unlock(&up->port.lock);
return ret;
.name = "Samsung S3C6400 UART",
.type = PORT_S3C6400,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (tx_enabled(port)) {
- disable_irq(ourport->tx_irq);
+ disable_irq_nosync(ourport->tx_irq);
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq(ourport->rx_irq);
+ disable_irq_nosync(ourport->rx_irq);
rx_enabled(port) = 0;
}
}
struct baud_calc {
struct s3c24xx_uart_clksrc *clksrc;
unsigned int calc;
+ unsigned int divslot;
unsigned int quot;
struct clk *src;
};
struct s3c24xx_uart_clksrc *clksrc,
unsigned int baud)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long rate;
calc->src = clk_get(port->dev, clksrc->name);
rate /= clksrc->divisor;
calc->clksrc = clksrc;
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we calculated
+ * by not multiplying the baud by 16) as it is easy enough
+ * to recalculate.
+ */
+
+ calc->quot = div / 16;
+ calc->calc = rate / div;
+ } else {
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+ }
calc->quot--;
return 1;
return best->quot;
}
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+ [0] = 0x0000,
+ [1] = 0x0080,
+ [2] = 0x0808,
+ [3] = 0x0888,
+ [4] = 0x2222,
+ [5] = 0x4924,
+ [6] = 0x4A52,
+ [7] = 0x54AA,
+ [8] = 0x5555,
+ [9] = 0xD555,
+ [10] = 0xD5D5,
+ [11] = 0xDDD5,
+ [12] = 0xDDDD,
+ [13] = 0xDFDD,
+ [14] = 0xDFDF,
+ [15] = 0xFFDF,
+};
+
static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
unsigned int baud, quot;
unsigned int ulcon;
unsigned int umcon;
+ unsigned int udivslot = 0;
/*
* We don't support modem control lines.
/* check to see if we need to change clock source */
if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ dbg("selecting clock %p\n", clk);
s3c24xx_serial_setsource(port, clksrc);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
+ if (ourport->info->has_divslot) {
+ unsigned int div = ourport->baudclk_rate / baud;
+
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
+
switch (termios->c_cflag & CSIZE) {
case CS5:
dbg("config: 5bits/char\n");
spin_lock_irqsave(&port->lock, flags);
- dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+ dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+ ulcon, quot, udivslot);
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
wr_regl(port, S3C2410_UMCON, umcon);
+ if (ourport->info->has_divslot)
+ wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
rd_regl(port, S3C2410_ULCON),
rd_regl(port, S3C2410_UCON),
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ /* uart port features */
+
+ unsigned int has_divslot:1;
+
/* clock source control */
int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
.major = TTY_MAJOR,
};
-static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up)
+static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up)
{
int quot, baud;
#ifdef CONFIG_SERIO
struct intc_desc_int {
struct list_head list;
struct sys_device sysdev;
+ pm_message_t state;
unsigned long *reg;
#ifdef CONFIG_SMP
unsigned long *smp;
/* get intc controller associated with this sysdev */
d = container_of(dev, struct intc_desc_int, sysdev);
- /* enable wakeup irqs belonging to this intc controller */
- for_each_irq_desc(irq, desc) {
- if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
- intc_enable(irq);
+ switch (state.event) {
+ case PM_EVENT_ON:
+ if (d->state.event != PM_EVENT_FREEZE)
+ break;
+ for_each_irq_desc(irq, desc) {
+ if (desc->chip != &d->chip)
+ continue;
+ if (desc->status & IRQ_DISABLED)
+ intc_disable(irq);
+ else
+ intc_enable(irq);
+ }
+ break;
+ case PM_EVENT_FREEZE:
+ /* nothing has to be done */
+ break;
+ case PM_EVENT_SUSPEND:
+ /* enable wakeup irqs belonging to this intc controller */
+ for_each_irq_desc(irq, desc) {
+ if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
+ intc_enable(irq);
+ }
+ break;
}
+ d->state = state;
return 0;
}
+static int intc_resume(struct sys_device *dev)
+{
+ return intc_suspend(dev, PMSG_ON);
+}
+
static struct sysdev_class intc_sysdev_class = {
.name = "intc",
.suspend = intc_suspend,
+ .resume = intc_resume,
};
/* register this intc as sysdev to allow suspend/resume */
struct chip_data *chip = drv_data->cur_chip;
if (chip->cs_control) {
- chip->cs_control(PXA2XX_CS_ASSERT);
+ chip->cs_control(PXA2XX_CS_DEASSERT);
return;
}
while (read_SSSR(reg) & SSSR_RNE) {
read_SSDR(reg);
}
- } while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+ } while ((read_SSSR(reg) & SSSR_BSY) && --limit);
write_SSSR(SSSR_ROR, reg);
return limit;
{
unsigned long limit = loops_per_jiffy << 1;
- while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+ while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
cpu_relax();
return limit;
{
unsigned long limit = loops_per_jiffy << 1;
- while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+ while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
cpu_relax();
return limit;
{
struct chip_data *chip = spi_get_ctldata(spi);
+ if (!chip)
+ return;
+
if (gpio_is_valid(chip->gpio_cs))
gpio_free(chip->gpio_cs);
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
+ if (drv_data->rx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_rx) =
+ DRCMR_MAPVLD | drv_data->rx_channel;
+ if (drv_data->tx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_tx) =
+ DRCMR_MAPVLD | drv_data->tx_channel;
+
/* Enable the SSP clock */
clk_enable(ssp->clk);
int status;
struct spi_message message;
- struct spi_transfer x;
+ struct spi_transfer x[2];
u8 *local_buf;
/* Use preallocated DMA-safe buffer. We can't avoid copying here,
return -EINVAL;
spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = n_tx + n_rx;
- spi_message_add_tail(&x, &message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+ x[1].len = n_rx;
+ spi_message_add_tail(&x[1], &message);
+ }
/* ... unless someone else is using the pre-allocated buffer */
if (!mutex_trylock(&lock)) {
local_buf = buf;
memcpy(local_buf, txbuf, n_tx);
- x.tx_buf = local_buf;
- x.rx_buf = local_buf;
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
/* do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
- memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
- if (x.tx_buf == buf)
+ if (x[0].tx_buf == buf)
mutex_unlock(&lock);
else
kfree(local_buf);
}
return -ENODEV;
}
+EXPORT_SYMBOL(ssb_watchdog_timer_set);
u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
{
static struct proc_dir_entry *binder_proc_dir_entry_root;
static struct proc_dir_entry *binder_proc_dir_entry_proc;
static struct hlist_head binder_dead_nodes;
+static HLIST_HEAD(binder_deferred_list);
+static DEFINE_MUTEX(binder_deferred_lock);
static int binder_read_proc_proc(
char *page, char **start, off_t off, int count, int *eof, void *data);
#define SZ_4M 0x400000
#endif
-#ifndef __i386__
-#define FORBIDDEN_MMAP_FLAGS (VM_WRITE | VM_EXEC)
-#else
#define FORBIDDEN_MMAP_FLAGS (VM_WRITE)
-#endif
#define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64)
uint8_t data[0];
};
+enum {
+ BINDER_DEFERRED_PUT_FILES = 0x01,
+ BINDER_DEFERRED_FLUSH = 0x02,
+ BINDER_DEFERRED_RELEASE = 0x04,
+};
+
struct binder_proc {
struct hlist_node proc_node;
struct rb_root threads;
int pid;
struct vm_area_struct *vma;
struct task_struct *tsk;
+ struct files_struct *files;
+ struct hlist_node deferred_work_node;
+ int deferred_work;
void *buffer;
- size_t user_buffer_offset;
+ ptrdiff_t user_buffer_offset;
struct list_head buffers;
struct rb_root free_buffers;
uid_t sender_euid;
};
+static void binder_defer_work(struct binder_proc *proc, int defer);
+
/*
* copied from get_unused_fd_flags
*/
-int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
+int task_get_unused_fd_flags(struct binder_proc *proc, int flags)
{
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
int fd, error;
struct fdtable *fdt;
unsigned long rlim_cur;
* will limit the total number of files that can be opened.
*/
rlim_cur = 0;
- if (lock_task_sighand(tsk, &irqs)) {
- rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
- unlock_task_sighand(tsk, &irqs);
+ if (lock_task_sighand(proc->tsk, &irqs)) {
+ rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+ unlock_task_sighand(proc->tsk, &irqs);
}
if (fd >= rlim_cur)
goto out;
out:
spin_unlock(&files->file_lock);
- put_files_struct(files);
return error;
}
* copied from fd_install
*/
static void task_fd_install(
- struct task_struct *tsk, unsigned int fd, struct file *file)
+ struct binder_proc *proc, unsigned int fd, struct file *file)
{
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
struct fdtable *fdt;
if (files == NULL)
BUG_ON(fdt->fd[fd] != NULL);
rcu_assign_pointer(fdt->fd[fd], file);
spin_unlock(&files->file_lock);
- put_files_struct(files);
}
/*
/*
* copied from sys_close
*/
-static long task_close_fd(struct task_struct *tsk, unsigned int fd)
+static long task_close_fd(struct binder_proc *proc, unsigned int fd)
{
struct file *filp;
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
struct fdtable *fdt;
int retval;
retval == -ERESTART_RESTARTBLOCK))
retval = -EINTR;
- put_files_struct(files);
return retval;
out_unlock:
spin_unlock(&files->file_lock);
- put_files_struct(files);
return -EBADF;
}
proc->pid, page_addr);
goto err_map_kernel_failed;
}
- user_page_addr = (size_t)page_addr + proc->user_buffer_offset;
+ user_page_addr =
+ (uintptr_t)page_addr + proc->user_buffer_offset;
ret = vm_insert_page(vma, user_page_addr, page[0]);
if (ret) {
printk(KERN_ERR "binder: %d: binder_alloc_buf failed "
page_addr -= PAGE_SIZE) {
page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
if (vma)
- zap_page_range(vma, (size_t)page_addr +
+ zap_page_range(vma, (uintptr_t)page_addr +
proc->user_buffer_offset, PAGE_SIZE, NULL);
err_vm_insert_page_failed:
unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
"er %p size %zd\n", proc->pid, size, buffer, buffer_size);
has_page_addr =
- (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK);
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
if (n == NULL) {
if (size + sizeof(struct binder_buffer) + 4 >= buffer_size)
buffer_size = size; /* no room for other buffers */
else
buffer_size = size + sizeof(struct binder_buffer);
}
- end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size);
+ end_page_addr =
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size);
if (end_page_addr > has_page_addr)
end_page_addr = has_page_addr;
if (binder_update_page_range(proc, 1,
- (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL))
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL))
return NULL;
rb_erase(best_fit, &proc->free_buffers);
static void *buffer_start_page(struct binder_buffer *buffer)
{
- return (void *)((size_t)buffer & PAGE_MASK);
+ return (void *)((uintptr_t)buffer & PAGE_MASK);
}
static void *buffer_end_page(struct binder_buffer *buffer)
{
- return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK);
+ return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
}
static void binder_delete_free_buffer(
}
binder_update_page_range(proc, 0,
- (void *)PAGE_ALIGN((size_t)buffer->data),
- (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK),
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data),
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
NULL);
rb_erase(&buffer->rb_node, &proc->allocated_buffers);
buffer->free = 1;
if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
struct binder_transaction *tmp;
tmp = thread->transaction_stack;
+ if (tmp->to_thread != thread) {
+ binder_user_error("binder: %d:%d got new "
+ "transaction with bad transaction stack"
+ ", transaction %d has target %d:%d\n",
+ proc->pid, thread->pid, tmp->debug_id,
+ tmp->to_proc ? tmp->to_proc->pid : 0,
+ tmp->to_thread ?
+ tmp->to_thread->pid : 0);
+ return_error = BR_FAILED_REPLY;
+ goto err_bad_call_stack;
+ }
while (tmp) {
if (tmp->from && tmp->from->proc == target_proc)
target_thread = tmp->from;
return_error = BR_FAILED_REPLY;
goto err_copy_data_failed;
}
+ if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
+ binder_user_error("binder: %d:%d got transaction with "
+ "invalid offsets size, %zd\n",
+ proc->pid, thread->pid, tr->offsets_size);
+ return_error = BR_FAILED_REPLY;
+ goto err_bad_offset;
+ }
off_end = (void *)offp + tr->offsets_size;
for (; offp < off_end; offp++) {
struct flat_binder_object *fp;
- if (*offp > t->buffer->data_size - sizeof(*fp)) {
+ if (*offp > t->buffer->data_size - sizeof(*fp) ||
+ t->buffer->data_size < sizeof(*fp) ||
+ !IS_ALIGNED(*offp, sizeof(void *))) {
binder_user_error("binder: %d:%d got transaction with "
"invalid offset, %zd\n",
proc->pid, thread->pid, *offp);
return_error = BR_FAILED_REPLY;
goto err_fget_failed;
}
- target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC);
+ target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC);
if (target_fd < 0) {
fput(file);
return_error = BR_FAILED_REPLY;
goto err_get_unused_fd_failed;
}
- task_fd_install(target_proc->tsk, target_fd, file);
+ task_fd_install(target_proc, target_fd, file);
if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
printk(KERN_INFO " fd %ld -> %d\n", fp->handle, target_fd);
/* TODO: fput? */
off_end = (void *)offp + buffer->offsets_size;
for (; offp < off_end; offp++) {
struct flat_binder_object *fp;
- if (*offp > buffer->data_size - sizeof(*fp)) {
+ if (*offp > buffer->data_size - sizeof(*fp) ||
+ buffer->data_size < sizeof(*fp) ||
+ !IS_ALIGNED(*offp, sizeof(void *))) {
printk(KERN_ERR "binder: transaction release %d bad"
"offset %zd, size %zd\n", debug_id, *offp, buffer->data_size);
continue;
if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
printk(KERN_INFO " fd %ld\n", fp->handle);
if (failed_at)
- task_close_fd(proc->tsk, fp->handle);
+ task_close_fd(proc, fp->handle);
break;
default:
tr.data_size = t->buffer->data_size;
tr.offsets_size = t->buffer->offsets_size;
- tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset);
+ tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
if (put_user(cmd, (uint32_t __user *)ptr))
(unsigned long)pgprot_val(vma->vm_page_prot));
dump_stack();
}
+
static void binder_vma_close(struct vm_area_struct *vma)
{
struct binder_proc *proc = vma->vm_private_data;
(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
(unsigned long)pgprot_val(vma->vm_page_prot));
proc->vma = NULL;
+ binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES);
}
static struct vm_operations_struct binder_vm_ops = {
}
vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
+ if (proc->buffer) {
+ ret = -EBUSY;
+ failure_string = "already mapped";
+ goto err_already_mapped;
+ }
+
area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
if (area == NULL) {
ret = -ENOMEM;
goto err_get_vm_area_failed;
}
proc->buffer = area->addr;
- proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer;
+ proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
#ifdef CONFIG_CPU_CACHE_VIPT
if (cache_is_vipt_aliasing()) {
binder_insert_free_buffer(proc, buffer);
proc->free_async_space = proc->buffer_size / 2;
barrier();
+ proc->files = get_files_struct(current);
proc->vma = vma;
/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
err_alloc_small_buf_failed:
kfree(proc->pages);
+ proc->pages = NULL;
err_alloc_pages_failed:
vfree(proc->buffer);
+ proc->buffer = NULL;
err_get_vm_area_failed:
- mutex_unlock(&binder_lock);
+err_already_mapped:
err_bad_arg:
printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
return ret;
if (binder_proc_dir_entry_proc) {
char strbuf[11];
snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+ remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
}
static int binder_flush(struct file *filp, fl_owner_t id)
{
- struct rb_node *n;
struct binder_proc *proc = filp->private_data;
- int wake_count = 0;
- mutex_lock(&binder_lock);
+ binder_defer_work(proc, BINDER_DEFERRED_FLUSH);
+
+ return 0;
+}
+
+static void binder_deferred_flush(struct binder_proc *proc)
+{
+ struct rb_node *n;
+ int wake_count = 0;
for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) {
struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node);
thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN;
}
}
wake_up_interruptible_all(&proc->wait);
- mutex_unlock(&binder_lock);
if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count);
-
- return 0;
}
static int binder_release(struct inode *nodp, struct file *filp)
{
- struct hlist_node *pos;
- struct binder_transaction *t;
- struct rb_node *n;
struct binder_proc *proc = filp->private_data;
- int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
-
if (binder_proc_dir_entry_proc) {
char strbuf[11];
snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
}
- mutex_lock(&binder_lock);
+
+ binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
+
+ return 0;
+}
+
+static void binder_deferred_release(struct binder_proc *proc)
+{
+ struct hlist_node *pos;
+ struct binder_transaction *t;
+ struct rb_node *n;
+ int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
+
+ BUG_ON(proc->vma);
+ BUG_ON(proc->files);
+
hlist_del(&proc->proc_node);
if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
}
binder_stats.obj_deleted[BINDER_STAT_PROC]++;
- mutex_unlock(&binder_lock);
page_count = 0;
if (proc->pages) {
proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
kfree(proc);
- return 0;
+}
+
+static void binder_deferred_func(struct work_struct *work)
+{
+ struct binder_proc *proc;
+ struct files_struct *files;
+
+ int defer;
+ do {
+ mutex_lock(&binder_lock);
+ mutex_lock(&binder_deferred_lock);
+ if (!hlist_empty(&binder_deferred_list)) {
+ proc = hlist_entry(binder_deferred_list.first,
+ struct binder_proc, deferred_work_node);
+ hlist_del_init(&proc->deferred_work_node);
+ defer = proc->deferred_work;
+ proc->deferred_work = 0;
+ } else {
+ proc = NULL;
+ defer = 0;
+ }
+ mutex_unlock(&binder_deferred_lock);
+
+ files = NULL;
+ if (defer & BINDER_DEFERRED_PUT_FILES)
+ if ((files = proc->files))
+ proc->files = NULL;
+
+ if (defer & BINDER_DEFERRED_FLUSH)
+ binder_deferred_flush(proc);
+
+ if (defer & BINDER_DEFERRED_RELEASE)
+ binder_deferred_release(proc); /* frees proc */
+
+ mutex_unlock(&binder_lock);
+ if (files)
+ put_files_struct(files);
+ } while (proc);
+}
+static DECLARE_WORK(binder_deferred_work, binder_deferred_func);
+
+static void binder_defer_work(struct binder_proc *proc, int defer)
+{
+ mutex_lock(&binder_deferred_lock);
+ proc->deferred_work |= defer;
+ if (hlist_unhashed(&proc->deferred_work_node)) {
+ hlist_add_head(&proc->deferred_work_node,
+ &binder_deferred_list);
+ schedule_work(&binder_deferred_work);
+ }
+ mutex_unlock(&binder_deferred_lock);
}
static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
return 0;
}
+static const struct net_device_ops at76_netdev_ops = {
+ .ndo_open = at76_open,
+ .ndo_stop = at76_stop,
+ .ndo_get_stats = at76_get_stats,
+ .ndo_start_xmit = at76_tx,
+ .ndo_tx_timeout = at76_tx_timeout,
+ .ndo_set_multicast_list = at76_set_multicast,
+ .ndo_set_mac_address = at76_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
/* Register network device and initialize the hardware */
static int at76_init_new_device(struct at76_priv *priv,
struct usb_interface *interface)
priv->scan_mode = SCAN_TYPE_ACTIVE;
netdev->flags &= ~IFF_MULTICAST; /* not yet or never */
- netdev->open = at76_open;
- netdev->stop = at76_stop;
- netdev->get_stats = at76_get_stats;
+ netdev->netdev_ops = &at76_netdev_ops;
netdev->ethtool_ops = &at76_ethtool_ops;
/* Add pointers to enable iwspy support. */
priv->wireless_data.spy_data = &priv->spy_data;
netdev->wireless_data = &priv->wireless_data;
- netdev->hard_start_xmit = at76_tx;
- netdev->tx_timeout = at76_tx_timeout;
netdev->watchdog_timeo = 2 * HZ;
netdev->wireless_handlers = &at76_handler_def;
- netdev->set_multicast_list = at76_set_multicast;
- netdev->set_mac_address = at76_set_mac_address;
dev_alloc_name(netdev, "wlan%d");
ret = register_netdev(priv->netdev);
pci_set_master(pdev);
- r = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ r = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (r) {
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_free_res;
copy:
Ian Abbott <abbotti@mev.co.uk>
Frank Mori Hess <fmhess@users.sourceforge.net>
- David Schleef <ds@schleef.org>
return Ret;
}
+static const struct net_device_ops epl_netdev_ops = {
+ .ndo_open = VEthOpen,
+ .ndo_stop = VEthClose,
+ .ndo_get_stats = VEthGetStats,
+ .ndo_start_xmit = VEthXmit,
+ .ndo_tx_timeout = VEthTimeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
{
tEplKernel Ret = kEplSuccessful;
goto Exit;
}
- pVEthNetDevice_g->open = VEthOpen;
- pVEthNetDevice_g->stop = VEthClose;
- pVEthNetDevice_g->get_stats = VEthGetStats;
- pVEthNetDevice_g->hard_start_xmit = VEthXmit;
- pVEthNetDevice_g->tx_timeout = VEthTimeout;
+ pVEthNetDevice_g->netdev_ops = &epl_netdev_ops;
pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT;
pVEthNetDevice_g->destructor = free_netdev;
void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static const struct net_device_ops et131x_netdev_ops = {
+ .ndo_open = et131x_open,
+ .ndo_stop = et131x_close,
+ .ndo_start_xmit = et131x_tx,
+ .ndo_set_multicast_list = et131x_multicast,
+ .ndo_tx_timeout = et131x_tx_timeout,
+ .ndo_change_mtu = et131x_change_mtu,
+ .ndo_set_mac_address = et131x_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_get_stats = et131x_stats,
+ .ndo_do_ioctl = et131x_ioctl,
+};
+
/**
* et131x_device_alloc
*
*/
//netdev->init = &et131x_init;
//netdev->set_config = &et131x_config;
- netdev->get_stats = &et131x_stats;
- netdev->open = &et131x_open;
- netdev->stop = &et131x_close;
- netdev->do_ioctl = &et131x_ioctl;
- netdev->set_multicast_list = &et131x_multicast;
- netdev->hard_start_xmit = &et131x_tx;
- netdev->tx_timeout = &et131x_tx_timeout;
netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
- netdev->change_mtu = &et131x_change_mtu;
- netdev->set_mac_address = &et131x_set_mac_addr;
+ netdev->netdev_ops = &et131x_netdev_ops;
//netdev->ethtool_ops = &et131x_ethtool_ops;
/*
* Attempt to instantiate an I2C client by ID, probably loading a module.
*/
-static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
+static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
+ int id, int addr)
{
+ struct i2c_board_info info;
char *modname;
switch (id) {
}
if (modname != NULL)
request_module(modname);
- if (wis_i2c_probe_device(adapter, id, addr) == 1)
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = addr;
+ strlcpy(info.type, type, I2C_NAME_SIZE);
+ if (!i2c_new_device(adapter, &info))
return 0;
if (modname != NULL)
printk(KERN_INFO
if (go->i2c_adapter_online) {
for (i = 0; i < go->board_info->num_i2c_devs; ++i)
init_i2c_module(&go->i2c_adapter,
+ go->board_info->i2c_devs[i].type,
go->board_info->i2c_devs[i].id,
go->board_info->i2c_devs[i].addr);
-#ifdef TUNER_SET_TYPE_ADDR
- if (go->tuner_type >= 0) {
- struct tuner_setup tun_setup = {
- .mode_mask = T_ANALOG_TV,
- .addr = ADDR_UNSET,
- .type = go->tuner_type
- };
- i2c_clients_command(&go->i2c_adapter,
- TUNER_SET_TYPE_ADDR, &tun_setup);
- }
-#else
- if (go->tuner_type >= 0)
- i2c_clients_command(&go->i2c_adapter,
- TUNER_SET_TYPE, &go->tuner_type);
-#endif
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
i2c_clients_command(&go->i2c_adapter,
DECODER_SET_CHANNEL, &go->channel_number);
#include "go7007-priv.h"
#include "wis-i2c.h"
-/************** Registration interface for I2C client drivers **************/
-
-/* Since there's no way to auto-probe the I2C devices connected to the I2C
- * bus on the go7007, we have this silly little registration system that
- * client drivers can use to register their I2C driver ID and their
- * detect_client function (the one that's normally passed to i2c_probe).
- *
- * When a new go7007 device is connected, we can look up in a board info
- * table by the USB or PCI vendor/product/revision ID to determine
- * which I2C client module to load. The client driver module will register
- * itself here, and then we can call the registered detect_client function
- * to force-load a new client at the address listed in the board info table.
- *
- * Really the I2C subsystem should have a way to force-load I2C client
- * drivers when we have a priori knowledge of what's on the bus, especially
- * since the existing I2C auto-probe mechanism is so hokey, but we'll use
- * our own mechanism for the time being. */
-
-struct wis_i2c_client_driver {
- unsigned int id;
- found_proc found_proc;
- struct list_head list;
-};
-
-static LIST_HEAD(i2c_client_drivers);
-static DECLARE_MUTEX(i2c_client_driver_list_lock);
-
-/* Client drivers register here by their I2C driver ID */
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc)
-{
- struct wis_i2c_client_driver *driver;
-
- driver = kmalloc(sizeof(struct wis_i2c_client_driver), GFP_KERNEL);
- if (driver == NULL)
- return -ENOMEM;
- driver->id = id;
- driver->found_proc = found_proc;
-
- down(&i2c_client_driver_list_lock);
- list_add_tail(&driver->list, &i2c_client_drivers);
- up(&i2c_client_driver_list_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(wis_i2c_add_driver);
-
-void wis_i2c_del_driver(found_proc found_proc)
-{
- struct wis_i2c_client_driver *driver, *next;
-
- down(&i2c_client_driver_list_lock);
- list_for_each_entry_safe(driver, next, &i2c_client_drivers, list)
- if (driver->found_proc == found_proc) {
- list_del(&driver->list);
- kfree(driver);
- }
- up(&i2c_client_driver_list_lock);
-}
-EXPORT_SYMBOL(wis_i2c_del_driver);
-
-/* The main go7007 driver calls this to instantiate a client by driver
- * ID and bus address, which are both stored in the board info table */
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
- unsigned int id, int addr)
-{
- struct wis_i2c_client_driver *driver;
- int found = 0;
-
- if (addr < 0 || addr > 0x7f)
- return -1;
- down(&i2c_client_driver_list_lock);
- list_for_each_entry(driver, &i2c_client_drivers, list)
- if (driver->id == id) {
- if (driver->found_proc(adapter, addr, 0) == 0)
- found = 1;
- break;
- }
- up(&i2c_client_driver_list_lock);
- return found;
-}
-
/********************* Driver for on-board I2C adapter *********************/
/* #define GO7007_I2C_DEBUG */
static struct i2c_adapter go7007_adap_templ = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_TV_ANALOG,
.name = "WIS GO7007SB",
- .id = I2C_ALGO_GO7007,
.algo = &go7007_algo,
};
int audio_main_div;
int num_i2c_devs;
struct {
+ const char *type;
int id;
int addr;
} i2c_devs[4];
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7113",
.id = I2C_DRIVERID_WIS_SAA7113,
.addr = 0x25,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
.num_i2c_devs = 3,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
{
+ .type = "wis_uda1342",
.id = I2C_DRIVERID_WIS_UDA1342,
.addr = 0x1a,
},
{
+ .type = "wis_sony_tuner",
.id = I2C_DRIVERID_WIS_SONY_TUNER,
.addr = 0x60,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_ov7640",
.id = I2C_DRIVERID_WIS_OV7640,
.addr = 0x21,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_tw9903",
.id = I2C_DRIVERID_WIS_TW9903,
.addr = 0x44,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_twTW2804",
.id = I2C_DRIVERID_WIS_TW2804,
.addr = 0x00, /* yes, really */
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "s2250_board",
.id = I2C_DRIVERID_S2250,
- .addr = 0x34,
+ .addr = 0x43,
},
},
.num_inputs = 2,
static struct i2c_adapter go7007_usb_adap_templ = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_TV_ANALOG,
.name = "WIS GO7007SB EZ-USB",
- .id = I2C_ALGO_GO7007_USB,
.algo = &go7007_usb_algo,
};
extern void s2250loader_cleanup(void);
#define TLV320_ADDRESS 0x34
-#define S2250_VIDDEC 0x86
#define VPX322_ADDR_ANALOGCONTROL1 0x02
#define VPX322_ADDR_BRIGHTNESS0 0x0127
#define VPX322_ADDR_BRIGHTNESS1 0x0131
int hue;
int reg12b_val;
int audio_input;
+ struct i2c_client *audio;
};
/* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/
{
struct v4l2_audio *audio = arg;
- client->addr = TLV320_ADDRESS;
switch (audio->index) {
case 0:
- write_reg(client, 0x08, 0x02); /* Line In */
+ write_reg(dec->audio, 0x08, 0x02); /* Line In */
break;
case 1:
- write_reg(client, 0x08, 0x04); /* Mic */
+ write_reg(dec->audio, 0x08, 0x04); /* Mic */
break;
case 2:
- write_reg(client, 0x08, 0x05); /* Mic Boost */
+ write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */
break;
default:
return -EINVAL;
return 0;
}
-static struct i2c_driver s2250_driver;
-
-static struct i2c_client s2250_client_templ = {
- .name = "Sensoray 2250",
- .driver = &s2250_driver,
-};
-
-static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int s2250_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_client *audio;
+ struct i2c_adapter *adapter = client->adapter;
struct s2250 *dec;
u8 *data;
struct go7007 *go = i2c_get_adapdata(adapter);
struct go7007_usb *usb = go->hpi_context;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
+ audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
+ if (audio == NULL)
return -ENOMEM;
- memcpy(client, &s2250_client_templ,
- sizeof(s2250_client_templ));
- client->adapter = adapter;
dec = kmalloc(sizeof(struct s2250), GFP_KERNEL);
if (dec == NULL) {
- kfree(client);
+ i2c_unregister_device(audio);
return -ENOMEM;
}
dec->contrast = 50;
dec->saturation = 50;
dec->hue = 0;
- client->addr = TLV320_ADDRESS;
+ dec->audio = audio;
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG
adapter->name);
/* initialize the audio */
- client->addr = TLV320_ADDRESS;
- if (write_regs(client, aud_regs) < 0) {
+ if (write_regs(audio, aud_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing audio\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
- client->addr = S2250_VIDDEC;
- i2c_set_clientdata(client, dec);
if (write_regs(client, vid_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
if (write_regs_fp(client, vid_regs_fp) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
up(&usb->i2c_lock);
}
- i2c_attach_client(client);
printk("s2250: initialized successfully\n");
return 0;
}
-static int s2250_detach(struct i2c_client *client)
+static int s2250_remove(struct i2c_client *client)
{
struct s2250 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
+ i2c_unregister_device(dec->audio);
kfree(dec);
return 0;
}
+static struct i2c_device_id s2250_id[] = {
+ { "s2250_board", 0 },
+ { }
+};
+
static struct i2c_driver s2250_driver = {
.driver = {
.name = "Sensoray 2250 board driver",
},
- .id = I2C_DRIVERID_S2250,
- .detach_client = s2250_detach,
+ .probe = s2250_probe,
+ .remove = s2250_remove,
.command = s2250_command,
+ .id_table = s2250_id,
};
static int __init s2250_init(void)
r = i2c_add_driver(&s2250_driver);
if (r < 0)
- return r;
- return wis_i2c_add_driver(s2250_driver.id, s2250_detect);
+ s2250loader_cleanup();
+
+ return r;
}
static void __exit s2250_cleanup(void)
{
- wis_i2c_del_driver(s2250_detect);
i2c_del_driver(&s2250_driver);
s2250loader_cleanup();
#define I2C_DRIVERID_WIS_OV7640 0xf0f5
#define I2C_DRIVERID_WIS_TW2804 0xf0f6
#define I2C_DRIVERID_S2250 0xf0f7
-#define I2C_ALGO_GO7007 0xf00000
-#define I2C_ALGO_GO7007_USB 0xf10000
/* Flag to indicate that the client needs to be accessed with SCCB semantics */
/* We re-use the I2C_M_TEN value so the flag passes through the masks in the
* core I2C code. Major kludge, but the I2C layer ain't exactly flexible. */
#define I2C_CLIENT_SCCB 0x10
-typedef int (*found_proc) (struct i2c_adapter *, int, int);
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc);
-void wis_i2c_del_driver(found_proc found_proc);
-
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
- unsigned int id, int addr);
-
/* Definitions for new video decoder commands */
struct video_decoder_resolution {
return 0;
}
-static struct i2c_driver wis_ov7640_driver;
-
-static struct i2c_client wis_ov7640_client_templ = {
- .name = "OV7640 (WIS)",
- .driver = &wis_ov7640_driver,
-};
-
-static int wis_ov7640_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_ov7640_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_ov7640_client_templ,
- sizeof(wis_ov7640_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
+
client->flags = I2C_CLIENT_SCCB;
printk(KERN_DEBUG
"wis-ov7640: initializing OV7640 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-ov7640: error initializing OV7640\n");
- kfree(client);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_ov7640_detach(struct i2c_client *client)
+static int wis_ov7640_remove(struct i2c_client *client)
{
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_ov7640_id[] = {
+ { "wis_ov7640", 0 },
+ { }
+};
+
static struct i2c_driver wis_ov7640_driver = {
.driver = {
.name = "WIS OV7640 I2C driver",
},
- .id = I2C_DRIVERID_WIS_OV7640,
- .detach_client = wis_ov7640_detach,
+ .probe = wis_ov7640_probe,
+ .remove = wis_ov7640_remove,
+ .id_table = wis_ov7640_id,
};
static int __init wis_ov7640_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_ov7640_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_ov7640_driver.id, wis_ov7640_detect);
+ return i2c_add_driver(&wis_ov7640_driver);
}
static void __exit wis_ov7640_cleanup(void)
{
- wis_i2c_del_driver(wis_ov7640_detect);
i2c_del_driver(&wis_ov7640_driver);
}
return 0;
}
-static struct i2c_driver wis_saa7113_driver;
-
-static struct i2c_client wis_saa7113_client_templ = {
- .name = "SAA7113 (WIS)",
- .driver = &wis_saa7113_driver,
-};
-
-static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7113_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_saa7113 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_saa7113_client_templ,
- sizeof(wis_saa7113_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_saa7113), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 71;
printk(KERN_DEBUG
"wis-saa7113: initializing SAA7113 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7113: error initializing SAA7113\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_saa7113_detach(struct i2c_client *client)
+static int wis_saa7113_remove(struct i2c_client *client)
{
struct wis_saa7113 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_saa7113_id[] = {
+ { "wis_saa7113", 0 },
+ { }
+};
+
static struct i2c_driver wis_saa7113_driver = {
.driver = {
.name = "WIS SAA7113 I2C driver",
},
- .id = I2C_DRIVERID_WIS_SAA7113,
- .detach_client = wis_saa7113_detach,
+ .probe = wis_saa7113_probe,
+ .remove = wis_saa7113_remove,
.command = wis_saa7113_command,
+ .id_table = wis_saa7113_id,
};
static int __init wis_saa7113_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_saa7113_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_saa7113_driver.id, wis_saa7113_detect);
+ return i2c_add_driver(&wis_saa7113_driver);
}
static void __exit wis_saa7113_cleanup(void)
{
- wis_i2c_del_driver(wis_saa7113_detect);
i2c_del_driver(&wis_saa7113_driver);
}
return 0;
}
-static struct i2c_driver wis_saa7115_driver;
-
-static struct i2c_client wis_saa7115_client_templ = {
- .name = "SAA7115 (WIS)",
- .driver = &wis_saa7115_driver,
-};
-
-static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7115_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_saa7115 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_saa7115_client_templ,
- sizeof(wis_saa7115_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_saa7115), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 64;
printk(KERN_DEBUG
"wis-saa7115: initializing SAA7115 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7115: error initializing SAA7115\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_saa7115_detach(struct i2c_client *client)
+static int wis_saa7115_remove(struct i2c_client *client)
{
struct wis_saa7115 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_saa7115_id[] = {
+ { "wis_saa7115", 0 },
+ { }
+};
+
static struct i2c_driver wis_saa7115_driver = {
.driver = {
.name = "WIS SAA7115 I2C driver",
},
- .id = I2C_DRIVERID_WIS_SAA7115,
- .detach_client = wis_saa7115_detach,
+ .probe = wis_saa7115_probe,
+ .remove = wis_saa7115_remove,
.command = wis_saa7115_command,
+ .id_table = wis_saa7115_id,
};
static int __init wis_saa7115_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_saa7115_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_saa7115_driver.id, wis_saa7115_detect);
+ return i2c_add_driver(&wis_saa7115_driver);
}
static void __exit wis_saa7115_cleanup(void)
{
- wis_i2c_del_driver(wis_saa7115_detect);
i2c_del_driver(&wis_saa7115_driver);
}
struct wis_sony_tuner *t = i2c_get_clientdata(client);
switch (cmd) {
+#if 0
#ifdef TUNER_SET_TYPE_ADDR
case TUNER_SET_TYPE_ADDR:
{
t->type, sony_tuners[t->type - 200].name);
break;
}
+#endif
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
return 0;
}
-static struct i2c_driver wis_sony_tuner_driver;
-
-static struct i2c_client wis_sony_tuner_client_templ = {
- .name = "Sony TV Tuner (WIS)",
- .driver = &wis_sony_tuner_driver,
-};
-
-static int wis_sony_tuner_detect(struct i2c_adapter *adapter,
- int addr, int kind)
+static int wis_sony_tuner_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_sony_tuner *t;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_sony_tuner_client_templ,
- sizeof(wis_sony_tuner_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
t = kmalloc(sizeof(struct wis_sony_tuner), GFP_KERNEL);
- if (t == NULL) {
- kfree(client);
+ if (t == NULL)
return -ENOMEM;
- }
+
t->type = -1;
t->freq = 0;
t->mpxmode = 0;
printk(KERN_DEBUG
"wis-sony-tuner: initializing tuner at address %d on %s\n",
- addr, adapter->name);
-
- i2c_attach_client(client);
+ client->addr, adapter->name);
return 0;
}
-static int wis_sony_tuner_detach(struct i2c_client *client)
+static int wis_sony_tuner_remove(struct i2c_client *client)
{
struct wis_sony_tuner *t = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
+ i2c_set_clientdata(client, NULL);
kfree(t);
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_sony_tuner_id[] = {
+ { "wis_sony_tuner", 0 },
+ { }
+};
+
static struct i2c_driver wis_sony_tuner_driver = {
.driver = {
.name = "WIS Sony TV Tuner I2C driver",
},
- .id = I2C_DRIVERID_WIS_SONY_TUNER,
- .detach_client = wis_sony_tuner_detach,
+ .probe = wis_sony_tuner_probe,
+ .remove = wis_sony_tuner_remove,
.command = tuner_command,
+ .id_table = wis_sony_tuner_id,
};
static int __init wis_sony_tuner_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_sony_tuner_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_sony_tuner_driver.id,
- wis_sony_tuner_detect);
+ return i2c_add_driver(&wis_sony_tuner_driver);
}
static void __exit wis_sony_tuner_cleanup(void)
{
- wis_i2c_del_driver(wis_sony_tuner_detect);
i2c_del_driver(&wis_sony_tuner_driver);
}
return 0;
}
-static struct i2c_driver wis_tw2804_driver;
-
-static struct i2c_client wis_tw2804_client_templ = {
- .name = "TW2804 (WIS)",
- .driver = &wis_tw2804_driver,
-};
-
-static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw2804_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_tw2804 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_tw2804_client_templ,
- sizeof(wis_tw2804_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->channel = -1;
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
- i2c_attach_client(client);
return 0;
}
-static int wis_tw2804_detach(struct i2c_client *client)
+static int wis_tw2804_remove(struct i2c_client *client)
{
struct wis_tw2804 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_tw2804_id[] = {
+ { "wis_tw2804", 0 },
+ { }
+};
+
static struct i2c_driver wis_tw2804_driver = {
.driver = {
.name = "WIS TW2804 I2C driver",
},
- .id = I2C_DRIVERID_WIS_TW2804,
- .detach_client = wis_tw2804_detach,
+ .probe = wis_tw2804_probe,
+ .remove = wis_tw2804_remove,
.command = wis_tw2804_command,
+ .id_table = wis_tw2804_id,
};
static int __init wis_tw2804_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_tw2804_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_tw2804_driver.id, wis_tw2804_detect);
+ return i2c_add_driver(&wis_tw2804_driver);
}
static void __exit wis_tw2804_cleanup(void)
{
- wis_i2c_del_driver(wis_tw2804_detect);
i2c_del_driver(&wis_tw2804_driver);
}
return 0;
}
-static struct i2c_driver wis_tw9903_driver;
-
-static struct i2c_client wis_tw9903_client_templ = {
- .name = "TW9903 (WIS)",
- .driver = &wis_tw9903_driver,
-};
-
-static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw9903_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_tw9903 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_tw9903_client_templ,
- sizeof(wis_tw9903_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_tw9903), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 0;
dec->contrast = 0x60;
printk(KERN_DEBUG
"wis-tw9903: initializing TW9903 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_tw9903_detach(struct i2c_client *client)
+static int wis_tw9903_remove(struct i2c_client *client)
{
struct wis_tw9903 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_tw9903_id[] = {
+ { "wis_tw9903", 0 },
+ { }
+};
+
static struct i2c_driver wis_tw9903_driver = {
.driver = {
.name = "WIS TW9903 I2C driver",
},
- .id = I2C_DRIVERID_WIS_TW9903,
- .detach_client = wis_tw9903_detach,
+ .probe = wis_tw9903_probe,
+ .remove = wis_tw9903_remove,
.command = wis_tw9903_command,
+ .id_table = wis_tw9903_id,
};
static int __init wis_tw9903_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_tw9903_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_tw9903_driver.id, wis_tw9903_detect);
+ return i2c_add_driver(&wis_tw9903_driver);
}
static void __exit wis_tw9903_cleanup(void)
{
- wis_i2c_del_driver(wis_tw9903_detect);
i2c_del_driver(&wis_tw9903_driver);
}
return 0;
}
-static struct i2c_driver wis_uda1342_driver;
-
-static struct i2c_client wis_uda1342_client_templ = {
- .name = "UDA1342 (WIS)",
- .driver = &wis_uda1342_driver,
-};
-
-static int wis_uda1342_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_uda1342_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_uda1342_client_templ,
- sizeof(wis_uda1342_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
printk(KERN_DEBUG
"wis-uda1342: initializing UDA1342 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
write_reg(client, 0x00, 0x8000); /* reset registers */
write_reg(client, 0x00, 0x1241); /* select input 1 */
- i2c_attach_client(client);
return 0;
}
-static int wis_uda1342_detach(struct i2c_client *client)
+static int wis_uda1342_remove(struct i2c_client *client)
{
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_uda1342_id[] = {
+ { "wis_uda1342", 0 },
+ { }
+};
+
static struct i2c_driver wis_uda1342_driver = {
.driver = {
.name = "WIS UDA1342 I2C driver",
},
- .id = I2C_DRIVERID_WIS_UDA1342,
- .detach_client = wis_uda1342_detach,
+ .probe = wis_uda1342_probe,
+ .remove = wis_uda1342_remove,
.command = wis_uda1342_command,
+ .id_table = wis_uda1342_id,
};
static int __init wis_uda1342_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_uda1342_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_uda1342_driver.id, wis_uda1342_detect);
+ return i2c_add_driver(&wis_uda1342_driver);
}
static void __exit wis_uda1342_cleanup(void)
{
- wis_i2c_del_driver(wis_uda1342_detect);
i2c_del_driver(&wis_uda1342_driver);
}
{
static int dev;
struct snd_card *card;
+ int err;
- card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0);
-
- if (card == NULL)
- return -ENOMEM;
+ err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
+ &card);
+ if (err < 0)
+ return err;
line6->card = card;
return 0;
}
+static const struct net_device_ops vap_netdev_ops = {
+ .ndo_open = zfLnxVapOpen,
+ .ndo_stop = zfLnxVapClose,
+ .ndo_start_xmit = zfLnxVapXmitFrame,
+ .ndo_get_stats = usbdrv_get_stats,
+ .ndo_change_mtu = usbdrv_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef ZM_HOSTAPD_SUPPORT
+ .ndo_do_ioctl = usbdrv_ioctl,
+#else
+ .ndo_do_ioctl = NULL,
+#endif
+};
+
int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
{
/* Allocate net device structure */
vap[vapId].dev->ml_priv = parentDev->ml_priv;
//dev->hard_start_xmit = &zd1212_wds_xmit_frame;
- vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
- vap[vapId].dev->open = &zfLnxVapOpen;
- vap[vapId].dev->stop = &zfLnxVapClose;
- vap[vapId].dev->get_stats = &usbdrv_get_stats;
- vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
-#ifdef ZM_HOSTAPD_SUPPORT
- vap[vapId].dev->do_ioctl = usbdrv_ioctl;
-#else
- vap[vapId].dev->do_ioctl = NULL;
-#endif
+ vap[vapId].dev->netdev_ops = &vap_netdev_ops;
vap[vapId].dev->destructor = free_netdev;
vap[vapId].dev->tx_queue_len = 0;
usb_unlink_urb(macp->RegInUrb);
}
+static const struct net_device_ops otus_netdev_ops = {
+ .ndo_open = usbdrv_open,
+ .ndo_stop = usbdrv_close,
+ .ndo_start_xmit = usbdrv_xmit_frame,
+ .ndo_change_mtu = usbdrv_change_mtu,
+ .ndo_get_stats = usbdrv_get_stats,
+ .ndo_set_multicast_list = usbdrv_set_multi,
+ .ndo_set_mac_address = usbdrv_set_mac,
+ .ndo_do_ioctl = usbdrv_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
{
//unsigned char addr[6];
dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def;
#endif
- dev->open = usbdrv_open;
- dev->hard_start_xmit = usbdrv_xmit_frame;
- dev->stop = usbdrv_close;
- dev->change_mtu = &usbdrv_change_mtu;
- dev->get_stats = usbdrv_get_stats;
- dev->set_multicast_list = usbdrv_set_multi;
- dev->set_mac_address = usbdrv_set_mac;
- dev->do_ioctl = usbdrv_ioctl;
+ dev->netdev_ops = &otus_netdev_ops;
dev->flags |= IFF_MULTICAST;
static struct usb_device_id zd1221_ids [] = {
{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
{ USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
- { USB_DEVICE(0x0846, 0x9010) },
+ { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
+ { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
{ } /* Terminating entry */
};
#define VENDOR_DLINK 0x07D1 //Dlink
#define PRODUCT_DWA160A 0x3C10
+#define VENDOR_NETGEAR 0x0846 /* NetGear */
+#define PRODUCT_WNDA3100 0x9010
+#define PRODUCT_WN111v2 0x9001
+
#endif
return g;
}
+static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
+{
+ struct pohmelfs_config *tmp;
+
+ INIT_LIST_HEAD(&dst->config_entry);
+
+ list_for_each_entry(tmp, &psb->state_list, config_entry) {
+ if (dst->state.ctl.prio > tmp->state.ctl.prio)
+ list_add_tail(&dst->config_entry, &tmp->config_entry);
+ }
+ if (list_empty(&dst->config_entry))
+ list_add_tail(&dst->config_entry, &psb->state_list);
+}
+
+static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
+ struct pohmelfs_config *dst, struct pohmelfs_config *new)
+{
+ if ((dst->state.ctl.prio == new->state.ctl.prio) &&
+ (dst->state.ctl.perm == new->state.ctl.perm))
+ return 0;
+
+ dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
+ __func__, dst->state.ctl.prio, dst->state.ctl.perm,
+ new->state.ctl.prio, new->state.ctl.perm);
+ dst->state.ctl.prio = new->state.ctl.prio;
+ dst->state.ctl.perm = new->state.ctl.perm;
+
+ list_del_init(&dst->config_entry);
+ pohmelfs_insert_config_entry(psb, dst);
+ return 0;
+}
+
+/*
+ * pohmelfs_copy_config() is used to copy new state configs from the
+ * config group (controlled by the netlink messages) into the superblock.
+ * This happens either at startup time where no transactions can access
+ * the list of the configs (and thus list of the network states), or at
+ * run-time, where it is protected by the psb->state_lock.
+ */
int pohmelfs_copy_config(struct pohmelfs_sb *psb)
{
struct pohmelfs_config_group *g;
err = 0;
list_for_each_entry(dst, &psb->state_list, config_entry) {
if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
- err = -EEXIST;
+ err = pohmelfs_move_config_entry(psb, dst, c);
+ if (!err)
+ err = -EEXIST;
break;
}
}
memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
- list_add_tail(&dst->config_entry, &psb->state_list);
+ pohmelfs_insert_config_entry(psb, dst);
err = pohmelfs_state_init_one(psb, dst);
if (err) {
return err;
}
+static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
+{
+ old->perm = new->perm;
+ old->prio = new->prio;
+ return 0;
+}
+
static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
{
struct pohmelfs_config_group *g;
g->num_entry--;
kfree(c);
goto out_unlock;
+ } else if (action == POHMELFS_FLAGS_MODIFY) {
+ err = pohmelfs_modify_config(sc, ctl);
+ goto out_unlock;
} else {
err = -EEXIST;
goto out_unlock;
}
memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
g->num_entry++;
+
list_add_tail(&c->config_entry, &g->config_list);
out_unlock:
switch (msg->flags) {
case POHMELFS_FLAGS_ADD:
- err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD);
- break;
case POHMELFS_FLAGS_DEL:
- err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL);
+ case POHMELFS_FLAGS_MODIFY:
+ err = pohmelfs_cn_ctl(msg, msg->flags);
break;
case POHMELFS_FLAGS_SHOW:
err = pohmelfs_cn_disp(msg);
{
struct inode *inode = &pi->vfs_inode;
struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- long ret = msecs_to_jiffies(25000);
+ long ret = psb->wait_on_page_timeout;
int err;
dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
__func__, pi->ino, (u64)file->f_pos,
(unsigned long)file->private_data);
-
+#if 0
err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
if (err)
return err;
-
+#endif
err = pohmelfs_sync_remote_dir(pi);
if (err)
return err;
need_lock = pohmelfs_need_lock(parent, lock_type);
- err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
- if (err)
- goto out;
-
str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
mutex_lock(&parent->offset_lock);
ino = n->ino;
mutex_unlock(&parent->offset_lock);
- dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
- __func__, ino, inode, str.name, str.hash, parent->state);
+ dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
+ __func__, ino, inode, str.name, str.hash, parent->state, need_lock);
if (ino) {
inode = ilookup(dir->i_sb, ino);
goto out;
}
- dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
+ dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
__func__, dir, parent->ino,
str.name, str.len, parent->state, ino);
goto out;
}
+ err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
+ if (err)
+ goto out;
+
err = pohmelfs_lookup_single(parent, &str, ino);
if (err)
goto out;
if (ino) {
inode = ilookup(dir->i_sb, ino);
- printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
+ dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
__func__, ino, inode, str.name, str.hash);
if (!inode) {
- printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
+ dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
__func__, ino, str.name, str.hash);
//return NULL;
return ERR_PTR(-EACCES);
static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
{
struct inode *inode = dentry->d_inode;
+#if 0
struct pohmelfs_inode *pi = POHMELFS_I(inode);
int err;
err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
if (err)
return err;
-
dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
__func__, pi->ino, inode->i_mode, inode->i_uid,
inode->i_gid, inode->i_size);
+#endif
generic_fillattr(inode, stat);
return 0;
kfree(psb);
sb->s_fs_info = NULL;
-
- pohmelfs_ftrans_exit();
-}
-
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
- *flags |= MS_RDONLY;
- return 0;
}
static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
return 0;
}
-static const struct super_operations pohmelfs_sb_ops = {
- .alloc_inode = pohmelfs_alloc_inode,
- .destroy_inode = pohmelfs_destroy_inode,
- .drop_inode = pohmelfs_drop_inode,
- .write_inode = pohmelfs_write_inode,
- .put_super = pohmelfs_put_super,
- .remount_fs = pohmelfs_remount,
- .statfs = pohmelfs_statfs,
- .show_options = pohmelfs_show_options,
-};
-
enum {
pohmelfs_opt_idx,
+ pohmelfs_opt_crypto_thread_num,
+ pohmelfs_opt_trans_max_pages,
+ pohmelfs_opt_crypto_fail_unsupported,
+
+ /* Remountable options */
pohmelfs_opt_trans_scan_timeout,
pohmelfs_opt_drop_scan_timeout,
pohmelfs_opt_wait_on_page_timeout,
pohmelfs_opt_trans_retries,
- pohmelfs_opt_crypto_thread_num,
- pohmelfs_opt_trans_max_pages,
- pohmelfs_opt_crypto_fail_unsupported,
pohmelfs_opt_mcache_timeout,
};
static struct match_token pohmelfs_tokens[] = {
{pohmelfs_opt_idx, "idx=%u"},
+ {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
+ {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
+ {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
{pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
{pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
{pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
{pohmelfs_opt_trans_retries, "trans_retries=%u"},
- {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
- {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
- {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
{pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
};
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
+static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
{
char *p;
substring_t args[MAX_OPT_ARGS];
if (err)
return err;
+ if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
+ continue;
+
switch (token) {
case pohmelfs_opt_idx:
psb->idx = option;
return 0;
}
+static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
+{
+ int err;
+ struct pohmelfs_sb *psb = POHMELFS_SB(sb);
+ unsigned long old_sb_flags = sb->s_flags;
+
+ err = pohmelfs_parse_options(data, psb, 1);
+ if (err)
+ goto err_out_restore;
+
+ if (!(*flags & MS_RDONLY))
+ sb->s_flags &= ~MS_RDONLY;
+ return 0;
+
+err_out_restore:
+ sb->s_flags = old_sb_flags;
+ return err;
+}
+
static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
{
struct inode *inode = &pi->vfs_inode;
return err;
}
+static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
+{
+ struct netfs_state *st;
+ struct pohmelfs_ctl *ctl;
+ struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb);
+ struct pohmelfs_config *c;
+
+ mutex_lock(&psb->state_lock);
+
+ seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
+
+ list_for_each_entry(c, &psb->state_list, config_entry) {
+ st = &c->state;
+ ctl = &st->ctl;
+
+ seq_printf(m, "%u ", ctl->idx);
+ if (ctl->addr.sa_family == AF_INET) {
+ struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
+ //seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+ seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+ } else if (ctl->addr.sa_family == AF_INET6) {
+ struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
+ seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
+ } else {
+ unsigned int i;
+ for (i=0; i<ctl->addrlen; ++i)
+ seq_printf(m, "%02x.", ctl->addr.addr[i]);
+ }
+
+ seq_printf(m, " %u %u %d %u %x\n",
+ ctl->type, ctl->proto,
+ st->socket != NULL,
+ ctl->prio, ctl->perm);
+ }
+ mutex_unlock(&psb->state_lock);
+
+ return 0;
+}
+
+static const struct super_operations pohmelfs_sb_ops = {
+ .alloc_inode = pohmelfs_alloc_inode,
+ .destroy_inode = pohmelfs_destroy_inode,
+ .drop_inode = pohmelfs_drop_inode,
+ .write_inode = pohmelfs_write_inode,
+ .put_super = pohmelfs_put_super,
+ .remount_fs = pohmelfs_remount,
+ .statfs = pohmelfs_statfs,
+ .show_options = pohmelfs_show_options,
+ .show_stats = pohmelfs_show_stats,
+};
+
/*
* Allocate private superblock and create root dir.
*/
struct pohmelfs_inode *npi;
struct qstr str;
- pohmelfs_ftrans_init();
-
psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
if (!psb)
goto err_out_exit;
mutex_init(&psb->state_lock);
INIT_LIST_HEAD(&psb->state_list);
- err = pohmelfs_parse_options((char *) data, psb);
+ err = pohmelfs_parse_options((char *) data, psb, 0);
if (err)
goto err_out_free_sb;
err = PTR_ERR(npi);
goto err_out_crypto_exit;
}
+ set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
+ clear_bit(NETFS_INODE_OWNED, &npi->state);
root = &npi->vfs_inode;
mnt);
}
+/*
+ * We need this to sync all inodes earlier, since when writeback
+ * is invoked from the umount/mntput path dcache is already shrunk,
+ * see generic_shutdown_super(), and no inodes can access the path.
+ */
+static void pohmelfs_kill_super(struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ .nr_to_write = LONG_MAX,
+ };
+ generic_sync_sb_inodes(sb, &wbc);
+
+ kill_anon_super(sb);
+}
+
static struct file_system_type pohmel_fs_type = {
.owner = THIS_MODULE,
.name = "pohmel",
.get_sb = pohmelfs_get_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = pohmelfs_kill_super,
};
/*
path_len = err;
err = -ENOMEM;
- t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0);
+ t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
+ NETFS_TRANS_SINGLE_DST, 0);
if (!t)
goto err_out_exit;
#include "netfs.h"
-static int pohmelfs_ftrans_size = 10240;
-static u32 *pohmelfs_ftrans;
-
-int pohmelfs_ftrans_init(void)
-{
- pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4);
- if (!pohmelfs_ftrans)
- return -ENOMEM;
-
- return 0;
-}
-
-void pohmelfs_ftrans_exit(void)
-{
- vfree(pohmelfs_ftrans);
-}
-
-void pohmelfs_ftrans_clean(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- pohmelfs_ftrans[idx] = 0;
- }
-}
-
-void pohmelfs_ftrans_update(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- pohmelfs_ftrans[idx] = i;
- }
-}
-
-int pohmelfs_ftrans_check(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- return (pohmelfs_ftrans[idx] == i);
- }
-
- return -1;
-}
-
/*
* Async machinery lives here.
* All commands being sent to server do _not_ require sync reply,
if (err != -EEXIST)
goto err_out_put;
} else {
+ struct dentry *dentry, *alias, *pd;
+
set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
clear_bit(NETFS_INODE_OWNED, &npi->state);
+
+ pd = d_find_alias(&parent->vfs_inode);
+ if (pd) {
+ str.hash = full_name_hash(str.name, str.len);
+ dentry = d_alloc(pd, &str);
+ if (dentry) {
+ alias = d_materialise_unique(dentry, &npi->vfs_inode);
+ if (alias)
+ dput(dentry);
+ }
+
+ dput(dentry);
+ dput(pd);
+ }
}
}
out:
if (dst) {
netfs_trans_remove_nolock(dst, st);
t = dst->trans;
-
- pohmelfs_ftrans_update(cmd->start);
}
mutex_unlock(&st->trans_lock);
if (!t) {
- int check = pohmelfs_ftrans_check(cmd->start);
- printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n",
- __func__, cmd->start, cmd->id, cmd->size, cmd->ext, check);
+ printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
+ __func__, cmd->start, cmd->id, cmd->size, cmd->ext);
err = -EINVAL;
goto out;
}
POHMELFS_FLAGS_DEL, /* Network state control message for DEL */
POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */
POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */
+ POHMELFS_FLAGS_MODIFY, /* Network state modification message */
};
/*
unsigned char data[0]; /* Algorithm string, key and IV */
};
+#define POHMELFS_IO_PERM_READ (1<<0)
+#define POHMELFS_IO_PERM_WRITE (1<<1)
+
/*
* Configuration command used to create table of different remote servers.
*/
struct pohmelfs_ctl
{
- unsigned int idx; /* Config index */
- unsigned int type; /* Socket type */
- unsigned int proto; /* Socket protocol */
- unsigned int addrlen; /* Size of the address */
- unsigned short unused; /* Align structure by 4 bytes */
+ __u32 idx; /* Config index */
+ __u32 type; /* Socket type */
+ __u32 proto; /* Socket protocol */
+ __u16 addrlen; /* Size of the address */
+ __u16 perm; /* IO permission */
+ __u16 prio; /* IO priority */
struct saddr addr; /* Remote server address */
};
pohmelfs_mcache_free(psb, m);
}
-int pohmelfs_ftrans_init(void);
-void pohmelfs_ftrans_exit(void);
-void pohmelfs_ftrans_update(u64 id);
-int pohmelfs_ftrans_check(u64 id);
-void pohmelfs_ftrans_clean(u64 id);
-
#endif /* __KERNEL__*/
#endif /* __NETFS_H */
__func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
#endif
mutex_lock(&psb->state_lock);
+ list_for_each_entry(c, &psb->state_list, config_entry) {
+ st = &c->state;
- if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) {
- st = &psb->active_state->state;
-
- err = -EPIPE;
- if (netfs_state_poll(st) & POLLOUT) {
- err = netfs_trans_push_dst(t, st);
- if (!err) {
- err = netfs_trans_send(t, st);
- if (err) {
- netfs_trans_drop_last(t, st);
- } else {
- pohmelfs_switch_active(psb);
- goto out;
- }
- }
+ if (t->flags & NETFS_TRANS_SINGLE_DST) {
+ if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
+ continue;
+ } else {
+ if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
+ continue;
}
- pohmelfs_switch_active(psb);
- }
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
+ if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio))
+ st = &psb->active_state->state;
err = netfs_trans_push(t, st);
if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
break;
}
-out:
+
mutex_unlock(&psb->state_lock);
#if 0
dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
t->gen = atomic_inc_return(&psb->trans_gen);
- pohmelfs_ftrans_clean(t->gen);
-
cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
cmd->cmd = NETFS_TRANS;
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt2860_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT >= 12
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
- dev->validate_addr = NULL;
+ dev->netdev_ops = &rt2860_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \
+ {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
{USB_DEVICE(0x0789,0x0162)}, /* Logitec */ \
{USB_DEVICE(0x0789,0x0163)}, /* Logitec */ \
{USB_DEVICE(0x0789,0x0164)}, /* Logitec */ \
+ {USB_DEVICE(0x7392,0x7717)}, /* Edimax */ \
{ }/* Terminating entry */ \
}
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt2870_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
// dev->set_multicast_list = ieee80211_set_multicast_list;
// dev->change_mtu = ieee80211_change_mtu;
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
// dev->uninit = ieee80211_if_reinit;
// dev->destructor = ieee80211_if_free;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->netdev_ops = &rt2870_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
// OID_SET_HT_PHYMODE SetHT;
// WPDMA_GLO_CFG_STRUC GloCfg;
UINT32 MacCsr0 = 0;
- UINT32 MacValue = 0;
#ifdef RT2870
#ifdef INF_AMAZON_SE
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt3070_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
// dev->set_multicast_list = ieee80211_set_multicast_list;
// dev->change_mtu = ieee80211_change_mtu;
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
// dev->uninit = ieee80211_if_reinit;
// dev->destructor = ieee80211_if_free;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->netdev_ops = &rt3070_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
#define R8180H
-#define RTL8180_MODULE_NAME "rtl8180"
+#define RTL8180_MODULE_NAME "r8180"
#define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
#define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
#define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
{
struct proc_dir_entry *e;
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- priv->dir_dev = create_proc_entry(dev->name,
- S_IFDIR | S_IRUGO | S_IXUGO,
- rtl8180_proc);
+ priv->dir_dev = rtl8180_proc;
if (!priv->dir_dev) {
- DMESGE("Unable to initialize /proc/net/rtl8180/%s\n",
+ DMESGE("Unable to initialize /proc/net/r8180/%s\n",
dev->name);
return;
}
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-hw\n",
+ "/proc/net/r8180/%s/stats-hw\n",
dev->name);
}
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-rx\n",
+ "/proc/net/r8180/%s/stats-rx\n",
dev->name);
}
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-tx\n",
+ "/proc/net/r8180/%s/stats-tx\n",
dev->name);
}
#if 0
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/registers\n",
+ "/proc/net/r8180/%s/registers\n",
dev->name);
}
}
*tmp & (1<<15)? "ok": "err", *(tmp+4));
}
- DMESG("nic at %d",
- (nic-nicbegin) / 8 /4);
- DMESG("tail at %d", ((int)tail - (int)begin) /8 /4);
- DMESG("head at %d", ((int)head - (int)begin) /8 /4);
- DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri));
- DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri));
- //rtl8180_reset(dev);
return;
}
* descriptor's buffer must be 256 byte aligned
* we shouldn't be here, since we set DMA mask !
*/
- DMESGW("Fixing TX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
tmp=desc;
for (i=0;i<count;i++)
* descriptor's buffer must be 256 byte aligned
* should never happen since we specify the DMA mask
*/
-
- DMESGW("Fixing RX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
priv->rxring=desc;
- move firmware loading to request_firmware()
- remove direct memory access of structures
- any remaining sparse and checkpatch.pl warnings
- - any netdev recommended changes
+
+ - use net_device_ops
+ - use dev->stats rather than adapter->stats
+ - don't cast netdev_priv it is already void
+ - use compare_ether_addr
+ - GET RID OF MACROS
+ - work on all architectures
+ - without CONFIG_X86_64 confusion
+ - do 64 bit correctly
+ - don't depend on order of union
+ - get rid of ASSERT(), use BUG() instead but only where necessary
+ looks like most aren't really useful
+ - no new SIOCDEVPRIVATE ioctl allowed
+ - don't use module_param for configuring interrupt mitigation
+ use ethtool instead
+ - reorder code to elminate use of forward declarations
+ - don't keep private linked list of drivers.
+ - remove all the gratiutous debug infrastructure
+ - use PCI_DEVICE()
+ - do ethtool correctly using ethtool_ops
+ - NAPI?
+ - wasted overhead of extra stats
+ - state variables for things that are
+ easily availble and shouldn't be kept in card structure, cardnum, ...
+ slotnumber, events, ...
+ - get rid of slic_spinlock wrapper
+ - volatile == bad design => bad code
+ - locking too fine grained, not designed just throw more locks
+ at problem
+
Please send patches to:
Greg Kroah-Hartman <gregkh@suse.de>
return;
}
+static const struct net_device_ops slic_netdev_ops = {
+ .ndo_open = slic_entry_open,
+ .ndo_stop = slic_entry_halt,
+ .ndo_start_xmit = slic_xmit_start,
+ .ndo_do_ioctl = slic_ioctl,
+ .ndo_set_mac_address = slic_mac_set_address,
+ .ndo_get_stats = slic_get_stats,
+ .ndo_set_multicast_list = slic_mcast_set_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int __devinit slic_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
netdev->base_addr = (unsigned long)adapter->memorybase;
netdev->irq = adapter->irq;
- netdev->open = slic_entry_open;
- netdev->stop = slic_entry_halt;
- netdev->hard_start_xmit = slic_xmit_start;
- netdev->do_ioctl = slic_ioctl;
- netdev->set_mac_address = slic_mac_set_address;
- netdev->get_stats = slic_get_stats;
- netdev->set_multicast_list = slic_mcast_set_list;
+ netdev->netdev_ops = &slic_netdev_ops;
slic_debug_adapter_create(adapter);
}
/* Doesn't already exist. Allocate a structure to hold it */
- mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
+ mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
if (mcaddr == NULL)
return 1;
}
if (!physcard) {
/* no structure allocated for this physical card yet */
- physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
+ physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
ASSERT(physcard);
physcard->next = slic_global.phys_card;
config STLC45XX
tristate "stlc4550/4560 support"
- depends on MAC80211 && WLAN_80211 && SPI_MASTER
+ depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
---help---
This is a driver for stlc4550 and stlc4560 chipsets.
int ret,i;
if (!adapter->intrregistered) {
+ spin_unlock_irqrestore(&sxg_global.driver_lock,
+ sxg_global.flags);
for (i=0; i<adapter->nr_msix_entries; i++) {
ret = request_irq (adapter->msi_entries[i].vector,
sxg_isr,
adapter->netdev->name,
adapter->netdev);
if (ret) {
+ spin_lock_irqsave(&sxg_global.driver_lock,
+ sxg_global.flags);
DBG_ERROR("sxg: MSI-X request_irq (%s) "
"FAILED [%x]\n", adapter->netdev->name,
ret);
}
}
}
+ spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
adapter->msi_enabled = TRUE;
adapter->intrregistered = 1;
adapter->IntRegistered = TRUE;
return status;
}
+static const struct net_device_ops sxg_netdev_ops = {
+ .ndo_open = sxg_entry_open,
+ .ndo_stop = sxg_entry_halt,
+ .ndo_start_xmit = sxg_send_packets,
+ .ndo_do_ioctl = sxg_ioctl,
+ .ndo_change_mtu = sxg_change_mtu,
+ .ndo_get_stats = sxg_get_stats,
+ .ndo_set_multicast_list = sxg_mcast_set_list,
+ .ndo_validate_addr = eth_validate_addr,
+#if XXXTODO
+ .ndo_set_mac_address = sxg_mac_set_address,
+#else
+ .ndo_set_mac_address = eth_mac_addr,
+#endif
+};
+
static int sxg_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
netdev->base_addr = (unsigned long)adapter->base_addr;
netdev->irq = adapter->irq;
- netdev->open = sxg_entry_open;
- netdev->stop = sxg_entry_halt;
- netdev->hard_start_xmit = sxg_send_packets;
- netdev->do_ioctl = sxg_ioctl;
- netdev->change_mtu = sxg_change_mtu;
-#if XXXTODO
- netdev->set_mac_address = sxg_mac_set_address;
-#endif
- netdev->get_stats = sxg_get_stats;
- netdev->set_multicast_list = sxg_mcast_set_list;
+ netdev->netdev_ops = &sxg_netdev_ops;
SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
err = sxg_set_interrupt_capability(adapter);
DBG_ERROR("sxg: %s EXIT\n", __func__);
spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
return STATUS_SUCCESS;
}
u64 phys_addr;
unsigned long flags;
unsigned long queue_id=0;
+ int offload_cksum = 0;
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
pSgl, SxgSgl, 0, 0);
struct iphdr *ip;
ip = ip_hdr(skb);
- if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+ if (ip->protocol == IPPROTO_TCP)
+ offload_cksum = 1;
+ if (!offload_cksum || !tcp_hdr(skb))
+ queue_id = 0;
+ else if (offload_cksum && (DataLength >= sizeof(
struct tcphdr))){
queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
(ntohs (tcp_hdr(skb)->source) &
SXG_LARGE_SEND_QUEUE_MASK));
}
} else if (skb->protocol == htons(ETH_P_IPV6)) {
- if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >=
- sizeof(struct tcphdr)) ) {
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ offload_cksum = 1;
+ if (!offload_cksum || !tcp_hdr(skb))
+ queue_id = 0;
+ else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
(ntohs (tcp_hdr(skb)->source) &
SXG_LARGE_SEND_QUEUE_MASK):
}
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
- /* Update stats */
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += DataLength;
-#if XXXTODO /* Stats stuff */
- if (SXG_MULTICAST_PACKET(EtherHdr)) {
- if (SXG_BROADCAST_PACKET(EtherHdr)) {
- adapter->Stats.DumbXmtBcastPkts++;
- adapter->Stats.DumbXmtBcastBytes += DataLength;
+ memset(XmtCmd, '\0', sizeof(*XmtCmd));
+ XmtCmd->SgEntries = 1;
+ XmtCmd->Flags = 0;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ /*
+ * We need to set the Checkum in IP header to 0. This is
+ * required by hardware.
+ */
+ if (offload_cksum) {
+ ip_hdr(skb)->check = 0x0;
+ XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
+ XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
+ /*
+ * Dont know if length will require a change in
+ * case of VLAN
+ */
+ XmtCmd->CsumFlags.MacLen = ETH_HLEN;
+ XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
+ SXG_NW_HDR_LEN_SHIFT;
} else {
- adapter->Stats.DumbXmtMcastPkts++;
- adapter->Stats.DumbXmtMcastBytes += DataLength;
+ if (skb_checksum_help(skb)){
+ printk(KERN_EMERG "Dropped UDP packet for"
+ " incorrect checksum calculation\n");
+ if (XmtCmd)
+ SXG_ABORT_CMD(XmtRingInfo);
+ spin_unlock_irqrestore(&adapter->XmtZeroLock,
+ flags);
+ return STATUS_SUCCESS;
+ }
}
- } else {
- adapter->Stats.DumbXmtUcastPkts++;
- adapter->Stats.DumbXmtUcastBytes += DataLength;
}
-#endif
+
/*
* Fill in the command
* Copy out the first SGE to the command and adjust for offset
(SXG_INVALID_SGL(phys_addr,skb->data_len)))
{
spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
+ if (XmtCmd)
+ SXG_ABORT_CMD(XmtRingInfo);
/* Silently drop this packet */
printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
return STATUS_SUCCESS;
}
- memset(XmtCmd, '\0', sizeof(*XmtCmd));
XmtCmd->Buffer.FirstSgeAddress = phys_addr;
XmtCmd->Buffer.FirstSgeLength = DataLength;
XmtCmd->Buffer.SgeOffset = 0;
XmtCmd->Buffer.TotalLength = DataLength;
- XmtCmd->SgEntries = 1;
- XmtCmd->Flags = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- /*
- * We need to set the Checkum in IP header to 0. This is
- * required by hardware.
- */
- ip_hdr(skb)->check = 0x0;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
- /* Dont know if length will require a change in case of VLAN */
- XmtCmd->CsumFlags.MacLen = ETH_HLEN;
- XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
- SXG_NW_HDR_LEN_SHIFT;
- }
/*
* Advance transmit cmd descripter by 1.
* NOTE - See comments in SxgTcpOutput where we write
ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
adapter->Stats.XmtQLen++; /* Stats within lock */
+ /* Update stats */
+ adapter->stats.tx_packets++;
+ adapter->stats.tx_bytes += DataLength;
+#if XXXTODO /* Stats stuff */
+ if (SXG_MULTICAST_PACKET(EtherHdr)) {
+ if (SXG_BROADCAST_PACKET(EtherHdr)) {
+ adapter->Stats.DumbXmtBcastPkts++;
+ adapter->Stats.DumbXmtBcastBytes += DataLength;
+ } else {
+ adapter->Stats.DumbXmtMcastPkts++;
+ adapter->Stats.DumbXmtMcastBytes += DataLength;
+ }
+ } else {
+ adapter->Stats.DumbXmtUcastPkts++;
+ adapter->Stats.DumbXmtUcastBytes += DataLength;
+ }
+#endif
+
spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
XmtCmd, pSgl, SxgSgl, 0);
tty = tty_port_tty_get(&ATEN2011_port->port->port);
- if (tty && ATEN2011_port->open) {
+ if (tty && ATEN2011_port->open)
/* tell the tty driver that something has changed */
- wake_up_interruptible(&tty->write_wait);
- }
+ tty_wakeup(tty);
/* schedule_work(&ATEN2011_port->port->work); */
tty_kref_put(tty);
status = 0;
status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
/*
* Check to see if we've set up our endpoint info yet
* (can't set it up in ATEN2011_startup as the structures
cflag = tty->termios->c_cflag;
- if (!cflag) {
- dbg("%s %s", __func__, "cflag is NULL");
- return;
- }
-
- /* check that they really want us to change something */
- if (old_termios) {
- if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
- RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s", "Nothing to change");
- return;
- }
- }
-
- dbg("%s - clfag %08x iflag %08x", __func__,
+ dbg("%s - cflag %08x iflag %08x", __func__,
tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
if (old_termios) {
if (err)
goto error_free_hw;
- usb_set_intfdata(intf, priv);
+ usb_set_intfdata(intf, dev);
return 0;
static void wb35_disconnect(struct usb_interface *intf)
{
- struct wbsoft_priv *priv = usb_get_intfdata(intf);
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct wbsoft_priv *priv = hw->priv;
wb35_hw_halt(priv);
+ ieee80211_stop_queues(hw);
+ ieee80211_unregister_hw(hw);
+ ieee80211_free_hw(hw);
+
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
}
return 0;
}
+static const struct net_device_ops p80211_netdev_ops = {
+ .ndo_init = p80211knetdev_init,
+ .ndo_open = p80211knetdev_open,
+ .ndo_stop = p80211knetdev_stop,
+ .ndo_get_stats = p80211knetdev_get_stats,
+ .ndo_start_xmit = p80211knetdev_hard_start_xmit,
+ .ndo_set_multicast_list = p80211knetdev_set_multicast_list,
+ .ndo_do_ioctl = p80211knetdev_do_ioctl,
+ .ndo_set_mac_address = p80211knetdev_set_mac_address,
+ .ndo_tx_timeout = p80211knetdev_tx_timeout,
+ .ndo_change_mtu = wlan_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
/*----------------------------------------------------------------
* wlan_setup
*
} else {
wlandev->netdev = dev;
dev->ml_priv = wlandev;
- dev->hard_start_xmit = p80211knetdev_hard_start_xmit;
- dev->get_stats = p80211knetdev_get_stats;
- dev->init = p80211knetdev_init;
- dev->open = p80211knetdev_open;
- dev->stop = p80211knetdev_stop;
+ dev->netdev_ops = &p80211_netdev_ops;
mutex_init(&wlandev->ioctl_lock);
/* block ioctls until fully initialised. Don't forget to call
switch (trip_type) {
case THERMAL_TRIP_CRITICAL:
- if (temp > trip_temp) {
+ if (temp >= trip_temp) {
if (tz->ops->notify)
ret = tz->ops->notify(tz, count,
trip_type);
}
break;
case THERMAL_TRIP_HOT:
- if (temp > trip_temp)
+ if (temp >= trip_temp)
if (tz->ops->notify)
tz->ops->notify(tz, count, trip_type);
break;
cdev = instance->cdev;
- if (temp > trip_temp)
+ if (temp >= trip_temp)
cdev->ops->set_cur_state(cdev, 1);
else
cdev->ops->set_cur_state(cdev, 0);
}
break;
case THERMAL_TRIP_PASSIVE:
- if (temp > trip_temp || tz->passive)
+ if (temp >= trip_temp || tz->passive)
thermal_zone_device_passive(tz, temp,
trip_temp, count);
break;
module_init(hilscher_init_module);
module_exit(hilscher_exit_module);
+MODULE_DEVICE_TABLE(pci, hilscher_pci_ids);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger");
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
-obj-$(CONFIG_USB_ISP1760_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_FHCI_HCD) += host/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
+obj-$(CONFIG_USB_WDM) += class/
+obj-$(CONFIG_USB_TMC) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
- value / 100, abs(value) % 100);
+ if (likely(value >= 0)) {
+ return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
+ value / 100, value % 100);
+ } else {
+ value = -value;
+ return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
+ value / 100, value % 100);
+ }
}
static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
tty->driver_data = acm;
acm->tty = tty;
- /* force low_latency on so that our tty_push actually forces the data through,
- otherwise it is scheduled, and with high data rates data can get lost. */
- tty->low_latency = 1;
-
if (usb_autopm_get_interface(acm->control) < 0)
goto early_bail;
else
{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
*
* This driver supports USB CDC WCM Device Management.
*
- * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2007-2009 Oliver Neukum
*
* Some code taken from cdc-acm.c
*
if (!buffer)
goto out;
- while (buflen > 0) {
+ while (buflen > 2) {
if (buffer [1] != USB_DT_CS_INTERFACE) {
dev_err(&intf->dev, "skipping garbage\n");
goto next_desc;
spin_lock_init(&desc->iuspin);
init_waitqueue_head(&desc->wait);
desc->wMaxCommand = maxcom;
+ /* this will be expanded and needed in hardware endianness */
desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
desc->intf = intf;
INIT_WORK(&desc->rxwork, wdm_rxwork);
- iface = &intf->altsetting[0];
+ rv = -EINVAL;
+ iface = intf->cur_altsetting;
+ if (iface->desc.bNumEndpoints != 1)
+ goto err;
ep = &iface->endpoint[0].desc;
- if (!usb_endpoint_is_int_in(ep)) {
- rv = -EINVAL;
+ if (!ep || !usb_endpoint_is_int_in(ep))
goto err;
- }
desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
usb_set_intfdata(intf, desc);
rv = usb_register_dev(intf, &wdm_class);
- dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
- intf->minor - WDM_MINOR_BASE);
if (rv < 0)
- goto err;
+ goto err3;
+ else
+ dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+ intf->minor - WDM_MINOR_BASE);
out:
return rv;
+err3:
+ usb_set_intfdata(intf, NULL);
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->bMaxPacketSize0,
+ desc->inbuf,
+ desc->response->transfer_dma);
err2:
usb_buffer_free(interface_to_usbdev(desc->intf),
desc->wMaxPacketSize,
if (size <= pool_max [i])
return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
}
- return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
+ return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
}
void hcd_buffer_free(
ret = checkintf(ps, ret);
if (ret)
return ret;
- usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+ usb_reset_endpoint(ps->dev, ep);
return 0;
}
hcd->driver->endpoint_disable(hcd, ep);
}
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep: the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (hcd->driver->endpoint_reset)
+ hcd->driver->endpoint_reset(hcd, ep);
+ else {
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+ usb_settoggle(udev, epnum, is_out, 0);
+ if (is_control)
+ usb_settoggle(udev, epnum, !is_out, 0);
+ }
+}
+
/* Protect against drivers that try to unlink URBs after the device
* is gone, by waiting until all unlinks for @udev are finished.
* Since we don't currently track URBs by device, simply wait until
void (*endpoint_disable)(struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
+ /* (optional) reset any endpoint state such as sequence number
+ and current window */
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
/* root hub support */
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
int (*hub_control) (struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
extern void usb_hc_died(struct usb_hcd *hcd);
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
/* -------------------------------------------------------------------------- */
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
* the copy in usb-storage, for as long as we need two copies.
*/
- /* toggle was reset by the clear */
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+ usb_reset_endpoint(dev, endp);
return 0;
}
}
}
+/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address. Endpoint number for output,
+ * endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_host_endpoint *ep;
+
+ if (usb_endpoint_out(epaddr))
+ ep = dev->ep_out[epnum];
+ else
+ ep = dev->ep_in[epnum];
+ if (ep)
+ usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
/**
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
usb_disable_endpoint(dev, i, true);
usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
- dev->toggle[0] = dev->toggle[1] = 0;
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
*
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
- bool reset_toggle)
+ bool reset_ep)
{
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
- if (is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 1, 0);
+ if (reset_ep)
+ usb_hcd_reset_endpoint(dev, ep);
+ if (is_out || is_control)
dev->ep_out[epnum] = ep;
- }
- if (!is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 0, 0);
+ if (!is_out || is_control)
dev->ep_in[epnum] = ep;
- }
ep->enabled = 1;
}
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
*
* Enables all the endpoints for the interface's current altsetting.
*/
void usb_enable_interface(struct usb_device *dev,
- struct usb_interface *intf, bool reset_toggles)
+ struct usb_interface *intf, bool reset_eps)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+ usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
}
/**
* This issues a standard SET_CONFIGURATION request to the device using
* the current configuration. The effect is to reset most USB-related
* state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
* endpoints). Other usbcore state is unchanged, including bindings of
* usb device drivers to interfaces.
*
* (multi-interface) devices. Instead, the driver for each interface may
* use usb_set_interface() on the interfaces it claims. Be careful though;
* some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles). Resetting the whole
+ * reset all the interface state (notably endpoint state). Resetting the whole
* configuration would affect other drivers' interfaces.
*
* The caller must own the device lock.
if (retval < 0)
return retval;
- dev->toggle[0] = dev->toggle[1] = 0;
-
/* re-init hc/hcd interface/endpoint state */
for (i = 0; i < config->desc.bNumInterfaces; i++) {
struct usb_interface *intf = config->interface[i];
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
- usb_enable_endpoint(dev, &dev->ep0, true);
+ usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
if (ep->desc) {
list_add_tail(&req->queue, &ep->queue);
- if (ep->is_in || (ep_is_control(ep)
+ if ((!ep_is_control(ep) && ep->is_in) ||
+ (ep_is_control(ep)
&& (ep->state == DATA_STAGE_IN
|| ep->state == STATUS_STAGE_IN)))
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
- usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+ usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
GFP_KERNEL);
if (!usba_ep)
goto err_alloc_ep;
* - Gadget API (majority of optional features)
* - Suspend & Remote Wakeup
*/
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#define CAP_DEVICEADDR (0x014UL)
#define CAP_ENDPTLISTADDR (0x018UL)
#define CAP_PORTSC (0x044UL)
-#define CAP_DEVLC (0x0B4UL)
+#define CAP_DEVLC (0x084UL)
#define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL)
#define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
#define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL)
do {
dbg_event(_usb_addr(mEp), "ENABLE", 0);
+ mEp->qh[mEp->dir].ptr->cap = 0;
+
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->qh[mEp->dir].ptr->cap |= QH_IOS;
else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
static struct usb_gadget_driver fsg_driver;
static void close_backing_file(struct lun *curlun);
-static void close_all_backing_files(struct fsg_dev *fsg);
/*-------------------------------------------------------------------------*/
fsg->thread_task = NULL;
spin_unlock_irq(&fsg->lock);
- /* In case we are exiting because of a signal, unregister the
- * gadget driver and close the backing file. */
- if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+ /* If we are exiting because of a signal, unregister the
+ * gadget driver. */
+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
usb_gadget_unregister_driver(&fsg_driver);
- close_all_backing_files(fsg);
- }
/* Let the unbind and cleanup routines know the thread has exited */
complete_and_exit(&fsg->thread_notifier, 0);
}
}
-static void close_all_backing_files(struct fsg_dev *fsg)
-{
- int i;
-
- for (i = 0; i < fsg->nluns; ++i)
- close_backing_file(&fsg->luns[i]);
-}
-
static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf)
{
if (curlun->registered) {
device_remove_file(&curlun->dev, &dev_attr_ro);
device_remove_file(&curlun->dev, &dev_attr_file);
+ close_backing_file(curlun);
device_unregister(&curlun->dev);
curlun->registered = 0;
}
out:
fsg->state = FSG_STATE_TERMINATED; // The thread is dead
fsg_unbind(gadget);
- close_all_backing_files(fsg);
complete(&fsg->thread_notifier);
return rc;
}
/* Wait for the thread to finish up */
wait_for_completion(&fsg->thread_notifier);
- close_all_backing_files(fsg);
kref_put(&fsg->ref, fsg_release);
}
module_exit(fsg_cleanup);
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .probe = omap_udc_probe,
.remove = __exit_p(omap_udc_remove),
.suspend = omap_udc_suspend,
.resume = omap_udc_resume,
#endif
"%s\n", driver_desc,
use_dma ? " (dma)" : "");
- return platform_driver_register(&udc_driver);
+ return platform_driver_probe(&udc_driver, omap_udc_probe);
}
module_init(udc_init);
strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
}
-static u32 eth_get_link(struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
/* REVISIT can also support:
* - WOL (by tracking suspends and issuing remote wakeup)
* - msglevel (implies updated messaging)
static struct ethtool_ops ops = {
.get_drvinfo = eth_get_drvinfo,
- .get_link = eth_get_link
+ .get_link = ethtool_op_get_link,
};
static void defer_kevent(struct eth_dev *dev, int flag)
uchar = (c & 0x1f) << 6;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c;
uchar = (c & 0x0f) << 12;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c << 6;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c;
* already scheduled transactions
*/
if (125 < usecs) {
- int ufs = (usecs / 125) - 1;
+ int ufs = (usecs / 125);
int i;
for (i = uframe; i < (uframe + ufs) && i < 8; i++)
if (0 < tt_usecs[i]) {
u32 reg_base, or_reg, skip_reg;
unsigned long flags;
struct ptd ptd;
+ packet_enqueue *pe;
switch (usb_pipetype(urb->pipe)) {
case PIPE_ISOCHRONOUS:
reg_base = INT_REGS_OFFSET;
or_reg = HC_INT_IRQ_MASK_OR_REG;
skip_reg = HC_INT_PTD_SKIPMAP_REG;
+ pe = enqueue_an_INT_packet;
break;
default:
reg_base = ATL_REGS_OFFSET;
or_reg = HC_ATL_IRQ_MASK_OR_REG;
skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+ pe = enqueue_an_ATL_packet;
break;
}
u32 skip_map;
u32 or_map;
struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh = ints->qh;
skip_map = isp1760_readl(hcd->regs + skip_reg);
skip_map |= 1 << i;
priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+ i * sizeof(ptd), sizeof(ptd));
qtd = ints->qtd;
-
- clean_up_qtdlist(qtd);
+ qtd = clean_up_qtdlist(qtd);
free_mem(priv, ints->payload);
ints->payload = 0;
isp1760_urb_done(priv, urb, status);
+ if (qtd)
+ pe(hcd, qh, qtd);
break;
+
+ } else if (ints->qtd) {
+ struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+
+ for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+ if (qtd->urb == urb) {
+ prev_qtd->hw_next = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, status);
+ break;
+ }
+ prev_qtd = qtd;
+ }
+ /* we found the urb before the end of the list */
+ if (qtd)
+ break;
}
ints++;
}
* are always powered while this driver is active, and use
* active-low power switches.
*/
- for (i = 0; i < pdata->ports; i++) {
+ for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
int i;
if (pdata) {
- for (i = 0; i < pdata->ports; i++) {
+ for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_direction_output(pdata->vbus_pin[i], 1);
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
asl_qset_insert_begin(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->async_work);
- return 0;
+ return err;
}
/**
}
}
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct whc *whc = wusbhc_to_whc(wusbhc);
+ struct whc_qset *qset;
+
+ qset = ep->hcpriv;
+ if (qset) {
+ qset->remove = 1;
+
+ if (usb_endpoint_xfer_bulk(&ep->desc)
+ || usb_endpoint_xfer_control(&ep->desc))
+ queue_work(whc->workqueue, &whc->async_work);
+ else
+ queue_work(whc->workqueue, &whc->periodic_work);
+
+ qset_reset(whc, qset);
+ }
+}
+
+
static struct hc_driver whc_hc_driver = {
.description = "whci-hcd",
.product_desc = "Wireless host controller",
.urb_enqueue = whc_urb_enqueue,
.urb_dequeue = whc_urb_dequeue,
.endpoint_disable = whc_endpoint_disable,
+ .endpoint_reset = whc_endpoint_reset,
.hub_status_data = wusbhc_rh_status_data,
.hub_control = wusbhc_rh_control,
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
qset_insert_in_sw_list(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->periodic_work);
- return 0;
+ return err;
}
/**
qset_delete(whc, qset);
}
-
/**
* pzl_init - initialize the periodic zone list
* @whc: the WHCI host controller
QH_INFO3_TX_RATE_53_3
| QH_INFO3_TX_PWR(0) /* 0 == max power */
);
+
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
}
/**
* qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
*/
void qset_clear(struct whc *whc, struct whc_qset *qset)
{
qset->remove = 0;
qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
- qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+ qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
qset->qh.err_count = 0;
- qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
qset->qh.scratch[0] = 0;
qset->qh.scratch[1] = 0;
qset->qh.scratch[2] = 0;
init_completion(&qset->remove_complete);
}
+/**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window. This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+ wait_for_completion(&qset->remove_complete);
+
+ qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
/**
* get_qset - get the qset for an async endpoint
*
struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
void qset_delete(struct whc *whc, struct whc_qset *qset);
void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
gfp_t mem_flags);
void qset_free_std(struct whc *whc, struct whc_std *std);
#define QH_STATUS_FLOW_CTRL (1 << 15)
#define QH_STATUS_ICUR(i) ((i) << 5)
#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK 0x1f
/**
* usb_pipe_to_qh_type - USB core pipe type to QH transfer type
* trigger the "send a ZLP?" confusion.
*/
rndis = (maxpacket & 0x3f) == 0
+ && length > maxpacket
&& length < 0xffff
&& (length % maxpacket) != 0;
hw_ep = tx_ch->hw_ep;
- /* Peripheral role never repurposes the
- * endpoint, so immediate completion is
- * safe. Host role waits for the fifo
- * to empty (TXPKTRDY irq) before going
- * to the next queued bulk transfer.
- */
- if (is_host_active(cppi->musb)) {
-#if 0
- /* WORKAROUND because we may
- * not always get TXKPTRDY ...
- */
- int csr;
-
- csr = musb_readw(hw_ep->regs,
- MUSB_TXCSR);
- if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
- completed = false;
- }
- if (completed)
- musb_dma_completion(musb, index + 1, 1);
+ musb_dma_completion(musb, index + 1, 1);
} else {
/* Bigger transfer than we could fit in
return 0;
}
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
{
- unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
if (!musb->clock)
return 0;
- spin_lock_irqsave(&musb->lock, flags);
-
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
else
clk_enable(musb->clock);
/* for static cmos like DaVinci, register values were preserved
- * unless for some reason the whole soc powered down and we're
- * not treating that as a whole-system restart (e.g. swsusp)
+ * unless for some reason the whole soc powered down or the USB
+ * module got reset through the PSC (vs just being disabled).
*/
- spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
#else
#define musb_suspend NULL
-#define musb_resume NULL
+#define musb_resume_early NULL
#endif
static struct platform_driver musb_driver = {
.remove = __devexit_p(musb_remove),
.shutdown = musb_shutdown,
.suspend = musb_suspend,
- .resume = musb_resume,
+ .resume_early = musb_resume_early,
};
/*-------------------------------------------------------------------------*/
if (is_dma_capable() && ep->dma) {
struct dma_controller *c = ep->musb->dma_controller;
int value;
+
if (ep->is_in) {
+ /*
+ * The programming guide says that we must not clear
+ * the DMAMODE bit before DMAENAB, so we only
+ * clear it in the second write...
+ */
musb_writew(epio, MUSB_TXCSR,
- 0 | MUSB_TXCSR_FLUSHFIFO);
+ MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
musb_writew(epio, MUSB_TXCSR,
0 | MUSB_TXCSR_FLUSHFIFO);
} else {
| IN token(s) are recd from Host.
| -> DMA interrupt on completion
| calls TxAvail.
- | -> stop DMA, ~DmaEenab,
+ | -> stop DMA, ~DMAENAB,
| -> set TxPktRdy for last short pkt or zlp
| -> Complete Request
| -> Continue next request (call txstate)
request->dma, request_size);
if (use_dma) {
if (musb_ep->dma->desired_mode == 0) {
- /* ASSERT: DMAENAB is clear */
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAMODE);
+ /*
+ * We must not clear the DMAMODE bit
+ * before the DMAENAB bit -- and the
+ * latter doesn't always get cleared
+ * before we get here...
+ */
+ csr &= ~(MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr
+ | MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_DMAMODE;
csr |= (MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_MODE);
/* against programming guide */
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
if (!use_dma) {
c->channel_release(musb_ep->dma);
musb_ep->dma = NULL;
- /* ASSERT: DMAENAB clear */
- csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+ csr &= ~MUSB_TXCSR_DMAENAB;
+ musb_writew(epio, MUSB_TXCSR, csr);
/* invariant: prequest->buf is non-null */
}
#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int nOut,
- u8 *buf, u32 len);
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len);
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
}
}
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+ void __iomem *epio = ep->regs;
+ u16 csr;
+ int retries = 5;
+
+ /* scrub any data left in the fifo */
+ do {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+ break;
+ musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+ csr = musb_readw(epio, MUSB_TXCSR);
+ udelay(10);
+ } while (--retries);
+
+ WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+ ep->epnum, csr);
+
+ /* and reset for the next transfer */
+ musb_writew(epio, MUSB_TXCSR, 0);
+}
+
/*
* Start transmit. Caller is responsible for locking shared resources.
* musb must be locked.
}
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
{
u16 txcsr;
/* NOTE: no locks here; caller should lock and select EP */
txcsr = musb_readw(ep->regs, MUSB_TXCSR);
txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+ if (is_cppi_enabled())
+ txcsr |= MUSB_TXCSR_DMAMODE;
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
{
u16 frame;
u32 len;
- void *buf;
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
+ void *buf = urb->transfer_buffer;
+ u32 offset = 0;
struct musb_hw_ep *hw_ep = qh->hw_ep;
unsigned pipe = urb->pipe;
u8 address = usb_pipedevice(pipe);
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
- buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+ offset = urb->iso_frame_desc[0].offset;
len = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
}; s; }),
- epnum, buf, len);
+ epnum, buf + offset, len);
/* Configure endpoint */
if (is_in || hw_ep->is_shared_fifo)
hw_ep->in_qh = qh;
else
hw_ep->out_qh = qh;
- musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+ musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
if (is_in)
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
DBG(3, "check whether there's still time for periodic Tx\n");
- qh->iso_idx = 0;
frame = musb_readw(mbase, MUSB_FRAME);
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
if (!hw_ep->tx_channel)
musb_h_tx_start(hw_ep);
else if (is_cppi_enabled() || tusb_dma_omap())
- cppi_host_txdma_start(hw_ep);
+ musb_h_tx_dma_start(hw_ep);
}
}
csr = musb_readw(ep->regs, MUSB_TXCSR);
if (csr & MUSB_TXCSR_MODE) {
musb_h_tx_flush_fifo(ep);
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
musb_writew(ep->regs, MUSB_TXCSR,
- MUSB_TXCSR_FRCDATATOG);
+ csr | MUSB_TXCSR_FRCDATATOG);
}
- /* clear mode (and everything else) to enable Rx */
+
+ /*
+ * Clear the MODE bit (and everything else) to enable Rx.
+ * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
musb_writew(ep->regs, MUSB_TXCSR, 0);
/* scrub all previous state, clearing toggle */
ep->rx_reinit = 0;
}
+static bool musb_tx_dma_program(struct dma_controller *dma,
+ struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+ struct urb *urb, u32 offset, u32 length)
+{
+ struct dma_channel *channel = hw_ep->tx_channel;
+ void __iomem *epio = hw_ep->regs;
+ u16 pkt_size = qh->maxpacket;
+ u16 csr;
+ u8 mode;
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+ if (length > channel->max_len)
+ length = channel->max_len;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (length > pkt_size) {
+ mode = 1;
+ csr |= MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_DMAENAB;
+ } else {
+ mode = 0;
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+ csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+ }
+ channel->desired_mode = mode;
+ musb_writew(epio, MUSB_TXCSR, csr);
+#else
+ if (!is_cppi_enabled() && !tusb_dma_omap())
+ return false;
+
+ channel->actual_len = 0;
+
+ /*
+ * TX uses "RNDIS" mode automatically but needs help
+ * to identify the zero-length-final-packet case.
+ */
+ mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+ qh->segsize = length;
+
+ if (!dma->channel_program(channel, pkt_size, mode,
+ urb->transfer_dma + offset, length)) {
+ dma->channel_release(channel);
+ hw_ep->tx_channel = NULL;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+ return false;
+ }
+ return true;
+}
/*
* Program an HDRC endpoint as per the given URB
* Context: irqs blocked, controller lock held
*/
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int is_out,
- u8 *buf, u32 len)
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len)
{
struct dma_controller *dma_controller;
struct dma_channel *dma_channel;
/* general endpoint setup */
if (epnum) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* flush all old state, set default */
musb_h_tx_flush_fifo(hw_ep);
+
+ /*
+ * We must not clear the DMAMODE bit before or in
+ * the same cycle with the DMAENAB bit, so we clear
+ * the latter first...
+ */
csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
- | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_FRCDATATOG
| MUSB_TXCSR_H_RXSTALL
| MUSB_TXCSR_H_ERROR
);
csr |= MUSB_TXCSR_MODE;
- if (usb_gettoggle(urb->dev,
- qh->epnum, 1))
+ if (usb_gettoggle(urb->dev, qh->epnum, 1))
csr |= MUSB_TXCSR_H_WR_DATATOGGLE
| MUSB_TXCSR_H_DATATOGGLE;
else
csr |= MUSB_TXCSR_CLRDATATOG;
- /* twice in case of double packet buffering */
musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
+ csr &= ~MUSB_TXCSR_DMAMODE;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
} else {
/* endpoint 0: just flush */
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
+ musb_h_ep0_flush_fifo(hw_ep);
}
/* target addr and (for multipoint) hub addr/port */
else
load_count = min((u32) packet_sz, len);
-#ifdef CONFIG_USB_INVENTRA_DMA
- if (dma_channel) {
-
- /* clear previous state */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- qh->segsize = min(len, dma_channel->max_len);
-
- if (qh->segsize <= packet_sz)
- dma_channel->desired_mode = 0;
- else
- dma_channel->desired_mode = 1;
-
-
- if (dma_channel->desired_mode == 0) {
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE);
- csr |= (MUSB_TXCSR_DMAENAB);
- /* against programming guide */
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE);
-
- musb_writew(epio, MUSB_TXCSR, csr);
-
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- dma_channel->desired_mode,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- if (is_out)
- hw_ep->tx_channel = NULL;
- else
- hw_ep->rx_channel = NULL;
- dma_channel = NULL;
- }
- }
-#endif
-
- /* candidate for DMA */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
- /* program endpoint CSRs first, then setup DMA.
- * assume CPPI setup succeeds.
- * defer enabling dma.
- */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- dma_channel->actual_len = 0L;
- qh->segsize = len;
-
- /* TX uses "rndis" mode automatically, but needs help
- * to identify the zero-length-final-packet case.
- */
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- (urb->transfer_flags
- & URB_ZERO_PACKET)
- == URB_ZERO_PACKET,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- hw_ep->tx_channel = NULL;
- dma_channel = NULL;
-
- /* REVISIT there's an error path here that
- * needs handling: can't do dma, but
- * there's no pio buffer address...
- */
- }
- }
+ if (dma_channel && musb_tx_dma_program(dma_controller,
+ hw_ep, qh, urb, offset, len))
+ load_count = 0;
if (load_count) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* PIO to load FIFO */
qh->segsize = load_count;
musb_write_fifo(hw_ep, load_count, buf);
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_AUTOSET);
- /* write CSR */
- csr |= MUSB_TXCSR_MODE;
-
- if (epnum)
- musb_writew(epio, MUSB_TXCSR, csr);
}
/* re-enable interrupt */
dma_channel, packet_sz,
!(urb->transfer_flags
& URB_SHORT_NOT_OK),
- urb->transfer_dma,
+ urb->transfer_dma + offset,
qh->segsize);
if (!dma_ok) {
dma_controller->channel_release(
csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
musb_writew(epio, MUSB_CSR0, csr);
} else {
- csr |= MUSB_CSR0_FLUSHFIFO;
- musb_writew(epio, MUSB_CSR0, csr);
- musb_writew(epio, MUSB_CSR0, csr);
- csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
- musb_writew(epio, MUSB_CSR0, csr);
+ musb_h_ep0_flush_fifo(hw_ep);
}
musb_writeb(epio, MUSB_NAKLIMIT0, 0);
* SHOULD NEVER HAPPEN! */
ERR("no URB for end 0\n");
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, 0);
-
+ musb_h_ep0_flush_fifo(hw_ep);
goto done;
}
int pipe;
bool done = false;
u16 tx_csr;
- size_t wLength = 0;
- u8 *buf = NULL;
+ size_t length = 0;
+ size_t offset = 0;
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
/* with CPPI, DMA sometimes triggers "extra" irqs */
if (!urb) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
}
pipe = urb->pipe;
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
- goto finish;
+ return;
}
if (status) {
/* second cppi case */
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
+ }
+
+ if (is_dma_capable() && dma && !status) {
+ /*
+ * DMA has completed. But if we're using DMA mode 1 (multi
+ * packet DMA), we need a terminal TXPKTRDY interrupt before
+ * we can consider this transfer completed, lest we trash
+ * its last packet when writing the next URB's data. So we
+ * switch back to mode 0 to get that interrupt; we'll come
+ * back here once it happens.
+ */
+ if (tx_csr & MUSB_TXCSR_DMAMODE) {
+ /*
+ * We shouldn't clear DMAMODE with DMAENAB set; so
+ * clear them in a safe order. That should be OK
+ * once TXPKTRDY has been set (and I've never seen
+ * it being 0 at this moment -- DMA interrupt latency
+ * is significant) but if it hasn't been then we have
+ * no choice but to stop being polite and ignore the
+ * programmer's guide... :-)
+ *
+ * Note that we must write TXCSR with TXPKTRDY cleared
+ * in order not to re-trigger the packet send (this bit
+ * can't be cleared by CPU), and there's another caveat:
+ * TXPKTRDY may be set shortly and then cleared in the
+ * double-buffered FIFO mode, so we do an extra TXCSR
+ * read for debouncing...
+ */
+ tx_csr &= musb_readw(epio, MUSB_TXCSR);
+ if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+ tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+ }
+ tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+ /*
+ * There is no guarantee that we'll get an interrupt
+ * after clearing DMAMODE as we might have done this
+ * too late (after TXPKTRDY was cleared by controller).
+ * Re-read TXCSR as we have spoiled its previous value.
+ */
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+ }
+ /*
+ * We may get here from a DMA completion or TXPKTRDY interrupt.
+ * In any case, we must check the FIFO status here and bail out
+ * only if the FIFO still has data -- that should prevent the
+ * "missed" TXPKTRDY interrupts and deal with double-buffered
+ * FIFO mode too...
+ */
+ if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+ DBG(2, "DMA complete but packet still in FIFO, "
+ "CSR %04x\n", tx_csr);
+ return;
+ }
}
- /* REVISIT this looks wrong... */
if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
- wLength = dma->actual_len;
+ length = dma->actual_len;
else
- wLength = qh->segsize;
- qh->offset += wLength;
+ length = qh->segsize;
+ qh->offset += length;
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
- d->actual_length = qh->segsize;
+ d->actual_length = length;
+ d->status = status;
if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
} else {
d++;
- buf = urb->transfer_buffer + d->offset;
- wLength = d->length;
+ offset = d->offset;
+ length = d->length;
}
} else if (dma) {
done = true;
& URB_ZERO_PACKET))
done = true;
if (!done) {
- buf = urb->transfer_buffer
- + qh->offset;
- wLength = urb->transfer_buffer_length
- - qh->offset;
+ offset = qh->offset;
+ length = urb->transfer_buffer_length - offset;
}
}
}
urb->status = status;
urb->actual_length = qh->offset;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+ return;
+ } else if (usb_pipeisoc(pipe) && dma) {
+ if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+ offset, length))
+ return;
+ } else if (tx_csr & MUSB_TXCSR_DMAENAB) {
+ DBG(1, "not complete, but DMA enabled?\n");
+ return;
+ }
- } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
- /* WARN_ON(!buf); */
-
- /* REVISIT: some docs say that when hw_ep->tx_double_buffered,
- * (and presumably, fifo is not half-full) we should write TWO
- * packets before updating TXCSR ... other docs disagree ...
- */
- /* PIO: start next packet in this URB */
- if (wLength > qh->maxpacket)
- wLength = qh->maxpacket;
- musb_write_fifo(hw_ep, wLength, buf);
- qh->segsize = wLength;
-
- musb_ep_select(mbase, epnum);
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
- } else
- DBG(1, "not complete, but dma enabled?\n");
+ /*
+ * PIO: start next packet in this URB.
+ *
+ * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+ * (and presumably, FIFO is not half-full) we should write *two*
+ * packets before updating TXCSR; other docs disagree...
+ */
+ if (length > qh->maxpacket)
+ length = qh->maxpacket;
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+ qh->segsize = length;
-finish:
- return;
+ musb_ep_select(mbase, epnum);
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
}
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
struct usb_host_endpoint *hep = urb->ep;
- struct musb_qh *qh = hep->hcpriv;
+ struct musb_qh *qh;
struct usb_endpoint_descriptor *epd = &hep->desc;
int ret;
unsigned type_reg;
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ qh = ret ? NULL : hep->hcpriv;
+ if (qh)
+ urb->hcpriv = qh;
spin_unlock_irqrestore(&musb->lock, flags);
- if (ret)
- return ret;
/* DMA mapping was already done, if needed, and this urb is on
- * hep->urb_list ... so there's little to do unless hep wasn't
- * yet scheduled onto a live qh.
+ * hep->urb_list now ... so we're done, unless hep wasn't yet
+ * scheduled onto a live qh.
*
* REVISIT best to keep hep->hcpriv valid until the endpoint gets
* disabled, testing for empty qh->ring and avoiding qh setup costs
* except for the first urb queued after a config change.
*/
- if (qh) {
- urb->hcpriv = qh;
- return 0;
- }
+ if (qh || ret)
+ return ret;
/* Allocate and initialize qh, minimizing the work done each time
* hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
* endpoint's irq status here to avoid bogus irqs.
* clearing that status is platform-specific...
*/
- } else {
+ } else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_AUTOSET
musb_writew(epio, MUSB_TXCSR, csr);
/* flush cpu writebuffer */
csr = musb_readw(epio, MUSB_TXCSR);
+ } else {
+ musb_h_ep0_flush_fifo(ep);
}
if (status == 0)
musb_advance_schedule(ep->musb, urb, ep, is_in);
void __iomem *mbase = musb_channel->controller->base;
u8 bchannel = musb_channel->idx;
+ int offset;
u16 csr;
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (musb_channel->transmit) {
-
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_TXCSR));
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAENAB |
- MUSB_TXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
- csr);
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_TXCSR);
+
+ /*
+ * The programming guide says that we must clear
+ * the DMAENAB bit before the DMAMODE bit...
+ */
+ csr = musb_readw(mbase, offset);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(mbase, offset, csr);
+ csr &= ~MUSB_TXCSR_DMAMODE;
+ musb_writew(mbase, offset, csr);
} else {
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_RXCSR));
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_RXCSR);
+
+ csr = musb_readw(mbase, offset);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
- csr);
+ musb_writew(mbase, offset, csr);
}
musb_writew(mbase,
&& ((channel->desired_mode == 0)
|| (channel->actual_len &
(musb_channel->max_packet_sz - 1)))
- ) {
+ ) {
+ u8 epnum = musb_channel->epnum;
+ int offset = MUSB_EP_OFFSET(epnum,
+ MUSB_TXCSR);
+ u16 txcsr;
+
+ /*
+ * The programming guide says that we
+ * must clear DMAENAB before DMAMODE.
+ */
+ musb_ep_select(mbase, epnum);
+ txcsr = musb_readw(mbase, offset);
+ txcsr &= ~(MUSB_TXCSR_DMAENAB
+ | MUSB_TXCSR_AUTOSET);
+ musb_writew(mbase, offset, txcsr);
/* Send out the packet */
- musb_ep_select(mbase,
- musb_channel->epnum);
- musb_writew(mbase, MUSB_EP_OFFSET(
- musb_channel->epnum,
- MUSB_TXCSR),
- MUSB_TXCSR_TXPKTRDY);
- } else {
- musb_dma_completion(
- musb,
- musb_channel->epnum,
- musb_channel->transmit);
+ txcsr &= ~MUSB_TXCSR_DMAMODE;
+ txcsr |= MUSB_TXCSR_TXPKTRDY;
+ musb_writew(mbase, offset, txcsr);
}
+ musb_dma_completion(musb, musb_channel->epnum,
+ musb_channel->transmit);
}
}
}
* Some code has been taken from tusb6010.c
* Copyrights for that are attributable to:
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This file is part of the Inventra Controller Driver for Linux.
* TUSB6010 USB 2.0 OTG Dual Role controller
*
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
*
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
struct device *dev;
};
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
*/
void otg_put_transceiver(struct otg_transceiver *x)
{
- put_device(x->dev);
+ if (x)
+ put_device(x->dev);
}
EXPORT_SYMBOL(otg_put_transceiver);
dbg("%s - usb_clear_halt", __func__);
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
priv = usb_get_serial_port_data(port);
spin_lock_irqsave(&priv->lock, flags);
priv->rdtodo = 0;
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /* setting to zero could cause data loss */
- if (tty)
- tty->low_latency = 1;
-
/* raise both lines and set termios */
spin_lock_irqsave(&priv->lock, flags);
priv->line_control = CONTROL_DTR | CONTROL_RTS;
termios->c_cflag
|= CS8; /* character size 8 bits */
- /*
- * Force low_latency on; otherwise the pushes are scheduled;
- * this is bad as it opens up the possibility of dropping bytes
- * on the floor. We don't want to drop bytes on the floor. :)
- */
- tty->low_latency = 1;
tty_encode_baud_rate(tty, 115200, 115200);
}
static __u16 product;
struct ftdi_private {
+ struct kref kref;
ftdi_chip_type_t chip_type;
/* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+ { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
return -ENOMEM;
}
+ kref_init(&priv->kref);
spin_lock_init(&priv->rx_lock);
spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
dbg("%s", __func__);
}
+static void ftdi_sio_priv_release(struct kref *k)
+{
+ struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
+
+ kfree(priv);
+}
+
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
remove_sysfs_attrs(port);
- /* all open ports are closed at this point
- * (by usbserial.c:__serial_close, which calls ftdi_close)
- */
-
- if (priv) {
- usb_set_serial_port_data(port, NULL);
- kfree(priv);
- }
+ kref_put(&priv->kref, ftdi_sio_priv_release);
return 0;
}
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
-
+ else
+ kref_get(&priv->kref);
return result;
} /* ftdi_open */
mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
- cancel_delayed_work(&priv->rx_work);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&priv->rx_work);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
+ kref_put(&priv->kref, ftdi_sio_priv_release);
} /* ftdi_close */
#define ADI_VID 0x0456
#define ADI_GNICE_PID 0xF000
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID 0x9e88
+#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
dbg("%s - port %d", __func__, port->number);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
dbg("%s - port %d", __func__, port->number);
- /* force low_latency on so that our tty_push actually forces the data
- through, otherwise it is scheduled, and with high data rates (like
- with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* clear the throttle flags */
spin_lock_irqsave(&port->lock, flags);
port->throttled = 0;
/* local variables */
static int debug;
-static int low_latency = 1; /* tty low latency flag, on by default */
-
static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
/* see if we've set up our endpoint info yet (can't set it up
in edge_startup as the structures were not set up at that time.) */
serial = port->serial;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
#define EDGE_READ_URB_STOPPING 1
#define EDGE_READ_URB_STOPPED 2
-#define EDGE_LOW_LATENCY 1
#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */
#define EDGE_OUT_BUF_SIZE 1024
static int debug;
-static int low_latency = EDGE_LOW_LATENCY;
static int closing_wait = EDGE_CLOSING_WAIT;
static int ignore_cpu_rev;
static int default_uart_mode; /* RS232 */
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
port_number = port->number - port->serial->minor;
switch (port_number) {
case 0:
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
priv->free_len += PACKET_SIZE;
}
- /*
- * Force low latency on. This will immediately push data to the line
- * discipline instead of queueing.
- */
-
if (tty) {
- tty->low_latency = 1;
/* FIXME: These two are bogus */
tty->raw = 1;
tty->real_raw = 1;
if (!buf_flow_init)
return -ENOMEM;
- if (tty)
- tty->low_latency = 1;
-
/* --1: Tell the modem to initialize (we think) From sniffs this is
* always the first thing that gets sent to the modem during
* opening of the device */
tty->termios->c_oflag = 0;
tty->termios->c_iflag = 0;
priv->termios_initialized = 1;
- tty->low_latency = 1;
priv->poll = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
-
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
if (tty) {
- tty->low_latency = 1;
/* Default to echo off and other sane device settings */
tty->termios->c_lflag = 0;
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
-
/* see if we've set up our endpoint info yet *
* (can't set it up in mos7720_startup as the *
* structures were not set up at that time.) */
/*
* Version Information
*/
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
/*
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ * - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL 0x0557
+#define ATENINTL_DEVICE_ID_UC2324 0x2011
+
/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* Check to see if we've set up our endpoint info yet *
* (can't set it up in mos7840_startup as the structures *
* were not set up at that time.) */
mos7840_set_port_private(serial->port[i], mos7840_port);
spin_lock_init(&mos7840_port->pool_lock);
- mos7840_port->port_num = ((serial->port[i]->number -
- (serial->port[i]->serial->minor)) +
- 1);
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = i + 1;
+ dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+ dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+ dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+ dbg ("serial->minor = %d", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
+ dbg ("mos7840_port %d = %p", i, mos7840_port);
+ if (mos7840_port) {
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+ mos7840_port->zombie = 1;
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+ usb_kill_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
+ }
mos7840_set_port_private(serial->port[i], NULL);
}
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+ { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
priv->port = port;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
usb_rcvbulkpipe(priv->udev,
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
+#define DLINK_VENDOR_ID 0x1186
+#define DLINK_PRODUCT_DWM_652 0x3e04
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
usb_pipeout(urb->pipe), 0); */
}
- if (tty)
- tty->low_latency = 1;
-
option_send_setup(tty, port);
return 0;
{USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
+ {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
+ {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
+ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
+ {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
val |= 0x02;
/* If composite device then properly report interface */
- if (serial->num_ports == 1)
+ if (serial->num_ports == 1) {
interface = sierra_calc_interface(serial);
+ /* Control message is sent only to interfaces with
+ * interrupt_in endpoints
+ */
+ if (port->interrupt_in_urb) {
+ /* send control message */
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ }
+ }
+
/* Otherwise the need to do non-composite mapping */
else {
if (port->bulk_out_endpointAddress == 2)
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
- }
- return usb_control_msg(serial->dev,
+ return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface,
NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ }
}
return 0;
}
}
- if (tty)
- tty->low_latency = 1;
-
sierra_send_setup(tty, port);
/* start up the interrupt endpoint if we have one */
#define TI_TRANSFER_TIMEOUT 2
-#define TI_DEFAULT_LOW_LATENCY 0
#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
/* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS 0
/* read urb states */
#define TI_READ_URB_RUNNING 0
/* module parameters */
static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
static unsigned int vendor_3410_count;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
- "TTY low_latency flag, 0=off, 1=on, default is off");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait,
"Maximum wait for data to drain in close, in .01 secs, default is 4000");
spin_lock_init(&tport->tp_lock);
tport->tp_uart_base_addr = (i == 0 ?
TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
- tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
tport->tp_closing_wait = closing_wait;
init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- if (tty)
- tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
port_number = port->number - port->serial->minor;
memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
}
tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __func__,
- urb->actual_length, urb->transfer_buffer);
-
- if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __func__);
- else
- ti_recv(&urb->dev->dev, tty,
+ if (tty) {
+ if (urb->actual_length) {
+ usb_serial_debug_data(debug, dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (!tport->tp_is_open)
+ dbg("%s - port closed, dropping data",
+ __func__);
+ else
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
-
- spin_lock(&tport->tp_lock);
- tport->tp_icount.rx += urb->actual_length;
- spin_unlock(&tport->tp_lock);
+ spin_lock(&tport->tp_lock);
+ tport->tp_icount.rx += urb->actual_length;
+ spin_unlock(&tport->tp_lock);
+ }
tty_kref_put(tty);
}
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
return 0;
dbg("%s - %s", __func__, serial->type->description);
- serial->type->shutdown(serial);
-
/* return the minor range that this device had */
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
- for (i = 0; i < serial->num_ports; ++i)
- serial->port[i]->port.count = 0;
-
- /* the ports are cleaned up and released in port_release() */
- for (i = 0; i < serial->num_ports; ++i)
- if (serial->port[i]->dev.parent != NULL) {
- device_unregister(&serial->port[i]->dev);
- serial->port[i] = NULL;
- }
-
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
struct usb_serial *serial;
struct usb_serial_port *port;
unsigned int portNumber;
- int retval;
+ int retval = 0;
dbg("%s", __func__);
return -ENODEV;
}
+ mutex_lock(&serial->disc_mutex);
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
- if (!port) {
- retval = -ENODEV;
- goto bailout_kref_put;
- }
-
- if (port->serial->disconnected) {
+ if (!port || serial->disconnected)
retval = -ENODEV;
- goto bailout_kref_put;
- }
+ else
+ get_device(&port->dev);
+ /*
+ * Note: Our locking order requirement does not allow port->mutex
+ * to be acquired while serial->disc_mutex is held.
+ */
+ mutex_unlock(&serial->disc_mutex);
+ if (retval)
+ goto bailout_serial_put;
if (mutex_lock_interruptible(&port->mutex)) {
retval = -ERESTARTSYS;
- goto bailout_kref_put;
+ goto bailout_port_put;
}
++port->port.count;
goto bailout_mutex_unlock;
}
- retval = usb_autopm_get_interface(serial->interface);
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected)
+ retval = -ENODEV;
+ else
+ retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto bailout_module_put;
+
/* only call the device specific open if this
* is the first time the port is opened */
retval = serial->type->open(tty, port, filp);
if (retval)
goto bailout_interface_put;
+ mutex_unlock(&serial->disc_mutex);
}
mutex_unlock(&port->mutex);
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
+ mutex_unlock(&serial->disc_mutex);
module_put(serial->type->driver.owner);
bailout_mutex_unlock:
port->port.count = 0;
tty->driver_data = NULL;
tty_port_tty_set(&port->port, NULL);
mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+ put_device(&port->dev);
+bailout_serial_put:
usb_serial_put(serial);
return retval;
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial;
+ struct module *owner;
+ int count;
if (!port)
return;
dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->mutex);
+ serial = port->serial;
+ owner = serial->type->driver.owner;
if (port->port.count == 0) {
mutex_unlock(&port->mutex);
* this before we drop the port count. The call is protected
* by the port mutex
*/
- port->serial->type->close(tty, port, filp);
+ serial->type->close(tty, port, filp);
if (port->port.count == (port->console ? 2 : 1)) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
}
}
- if (port->port.count == 1) {
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected)
- usb_autopm_put_interface(port->serial->interface);
- mutex_unlock(&port->serial->disc_mutex);
- module_put(port->serial->type->driver.owner);
- }
--port->port.count;
-
+ count = port->port.count;
mutex_unlock(&port->mutex);
- usb_serial_put(port->serial);
+ put_device(&port->dev);
+
+ /* Mustn't dereference port any more */
+ if (count == 0) {
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
+ }
+ usb_serial_put(serial);
+
+ /* Mustn't dereference serial any more */
+ if (count == 0)
+ module_put(owner);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
static void port_free(struct usb_serial_port *port)
{
+ /*
+ * Stop all the traffic before cancelling the work, so that
+ * nobody will restart it by calling usb_serial_port_softint.
+ */
kill_traffic(port);
+ cancel_work_sync(&port->work);
+
usb_free_urb(port->read_urb);
usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
- flush_scheduled_work(); /* port->work */
kfree(port);
}
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
+ serial->num_ports = 0;
goto exit;
}
}
usb_set_intfdata(interface, NULL);
/* must set a flag, to signal subdrivers */
serial->disconnected = 1;
+ mutex_unlock(&serial->disc_mutex);
+
+ /* Unfortunately, many of the sub-drivers expect the port structures
+ * to exist when their shutdown method is called, so we have to go
+ * through this awkward two-step unregistration procedure.
+ */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
tty_kref_put(tty);
}
kill_traffic(port);
+ cancel_work_sync(&port->work);
+ device_del(&port->dev);
+ }
+ }
+ serial->type->shutdown(serial);
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port) {
+ put_device(&port->dev);
+ serial->port[i] = NULL;
}
}
+
/* let the last holder of this object
* cause it to be cleaned up */
- mutex_unlock(&serial->disc_mutex);
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
ifeq ($(CONFIG_USB_LIBUSUAL),)
usb-storage-objs += usual-tables.o
else
- obj-$(CONFIG_USB) += libusual.o usual-tables.o
+ obj-$(CONFIG_USB) += usb-libusual.o
+ usb-libusual-objs := libusual.o usual-tables.o
endif
obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
USB_ENDPOINT_HALT, endp,
NULL, 0, 3*HZ);
- /* reset the endpoint toggle */
if (result >= 0)
- usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
- usb_pipeout(pipe), 0);
+ usb_reset_endpoint(us->pusb_dev, endp);
US_DEBUGP("%s: result = %d\n", __func__, result);
return result;
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Andrew Nayenko <relan@bk.ru> */
-UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
+/* Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
"Nokia",
"Nokia 6288",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
"Simple Tech/Datafab",
"CF+SM Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
+ US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
* to the USB storage specification in two ways:
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
+ "D-Link",
+ "USB Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+ "TGE",
+ "Digital MP3 Audio Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
mutex_lock(&wusbhc->mutex);
wusbhc_devconnect_acked(wusbhc, wusb_dev);
mutex_unlock(&wusbhc->mutex);
+
+ wusb_dev_put(wusb_dev);
}
/*
/* After a device disconnects, change the GTK (see [WUSB]
* section 6.2.11.2). */
- wusbhc_gtk_rekey(wusbhc);
+ if (wusbhc->active)
+ wusbhc_gtk_rekey(wusbhc);
/* The Wireless USB part has forgotten about the device already; now
* khubd's timer will pick up the disconnection and remove the USB
* wusbhc_devconnect_stop - stop managing connected devices
* @wusbhc: the WUSB HC
*
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
*/
void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
{
- cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
- WARN_ON(!list_empty(&wusbhc->cack_list));
+ int i;
+ mutex_lock(&wusbhc->mutex);
+ for (i = 0; i < wusbhc->ports_max; i++) {
+ if (wusbhc->port[i].wusb_dev)
+ __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+ }
+ mutex_unlock(&wusbhc->mutex);
+
+ cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
kfree(wusbhc->wuie_host_info);
wusbhc->wuie_host_info = NULL;
wusb_trust_timeout_store);
/*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
*/
static ssize_t wusb_chid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+ const struct wusb_ckhdid *chid;
ssize_t result = 0;
if (wusbhc->wuie_host_info != NULL)
- result += ckhdid_printf(buf, PAGE_SIZE,
- &wusbhc->wuie_host_info->CHID);
+ chid = &wusbhc->wuie_host_info->CHID;
+ else
+ chid = &wusb_ckhdid_zero;
+
+ result += ckhdid_printf(buf, PAGE_SIZE, chid);
+ result += sprintf(buf + result, "\n");
+
return result;
}
/*
- * Store a new CHID
- *
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- * (unless it was started, it will just change the CHID,
- * diconnecting all devices first).
+ * Store a new CHID.
*
- * So first we scan the MMC we are sent and then we act on it. We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
*
* See wusbhc_chid_set() for more info.
*/
{
struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
- if (status == 0) {
+ if (status == 0 && wusb_dev) {
wusb_dev->entry_ts = jiffies;
- /* wusbhc_devconnect_acked() can't be called from from
+ /* wusbhc_devconnect_acked() can't be called from
atomic context so defer it to a work queue. */
if (!list_empty(&wusb_dev->cack_node))
queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+ else
+ wusb_dev_put(wusb_dev);
}
usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
To compile this driver as a module, choose M here: the
module will be called intelfb.
pixel and 32 bpp packed pixel. You can also use font widths
different from 8.
- If you need support for G400 secondary head, you must first say Y to
- "I2C support" in the character devices section, and then to
- "Matrox I2C support" and "G400 second head support" here in the
- framebuffer section. G450/G550 secondary head and digital output
- are supported without additional modules.
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
The driver starts in monitor mode. You must use the matroxset tool
(available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
a framebuffer device. There are both PCI and AGP versions. You
don't need to choose this to run the Radeon in plain VGA mode.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
There is a product page at
http://apps.ati.com/ATIcompare/
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
-obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/
obj-$(CONFIG_FB_S3) += s3fb.o
return ret;
}
-static int clcdfb_probe(struct amba_device *dev, void *id)
+static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
{
struct clcd_board *board = dev->dev.platform_data;
struct clcd_fb *fb;
writeb(0xff, mmio_base + 0x78c);
chips_hw_init(p);
+ return 0;
}
static int __devinit
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN 8
-
-#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
- defined(CONFIG_ARCH_AT91SAM9RL)
-#define ATMEL_LCDC_FIFO_SIZE 2048
-#else
-#define ATMEL_LCDC_FIFO_SIZE 512
-#endif
+#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
+#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
found:
/*
* Some methods fail to retrieve SCLK and MCLK values, we apply default
- * settings in this case (200Mhz). If that really happne often, we could
- * fetch from registers instead...
+ * settings in this case (200Mhz). If that really happens often, we
+ * could fetch from registers instead...
*/
if (rinfo->pll.mclk == 0)
rinfo->pll.mclk = 20000;
return 0;
bd = container_of(self, struct backlight_device, fb_notif);
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&bd->ops_lock);
if (bd->ops)
if (!bd->ops->check_fb ||
backlight_update_status(bd);
}
mutex_unlock(&bd->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
if (!ld->ops)
return 0;
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&ld->ops_lock);
if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
if (event == FB_EVENT_BLANK) {
}
}
mutex_unlock(&ld->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
*
* NOTES:
*
- * The code for depths like 24 that don't have integer number of pixels per
- * long is broken and needs to be fixed. For now I turned these types of
- * mode off.
- *
* Also need to add code to deal with cards endians that are different than
* the native cpu endians. I also need to deal with MSB position in the word.
*
// Trailing bits
if (last)
- FB_WRITEL(comp(pat, FB_READL(dst), first), dst);
+ FB_WRITEL(comp(pat, FB_READL(dst), last), dst);
}
}
void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
else
fg = rect->color;
- pat = pixel_to_pat( bpp, fg);
+ pat = pixel_to_pat(bpp, fg);
dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8;
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
fill_op = bitfill_unaligned;
break;
default:
- printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
+ printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
default:
dev_dbg(info->device,
"Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
+ return -EINVAL;
}
if (var->xres_virtual < var->xres)
}
+ if (!lock_fb_info(info))
+ return;
event.info = info;
event.data = ␣
fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
+ unlock_fb_info(info);
}
static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
{
int i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map[i] == idx)
if (primary_device == idx)
primary_device = -1;
- unlock_fb_info(info);
-
if (!num_registered_fb)
unregister_con_driver(&fb_con);
{
int ret = 0, i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
fbcon_select_primary(info);
- unlock_fb_info(info);
if (info_idx == -1) {
for (i = first_fb_vc; i <= last_fb_vc; i++) {
switch(action) {
case FB_EVENT_SUSPEND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_suspended(info);
- unlock_fb_info(info);
break;
case FB_EVENT_RESUME:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_resumed(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_modechanged(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE_ALL:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_set_all_vcs(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_DELETE:
mode = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
ret = fbcon_mode_deleted(info, mode);
- unlock_fb_info(info);
break;
case FB_EVENT_FB_UNBIND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
idx = info->node;
- unlock_fb_info(info);
ret = fbcon_fb_unbind(idx);
break;
case FB_EVENT_FB_REGISTERED:
con2fb->framebuffer = con2fb_map[con2fb->console - 1];
break;
case FB_EVENT_BLANK:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_fb_blanked(info, *(int *)event->data);
- unlock_fb_info(info);
break;
case FB_EVENT_NEW_MODELIST:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_new_modelist(info);
- unlock_fb_info(info);
break;
case FB_EVENT_GET_REQ:
caps = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_get_requirement(info, caps);
- unlock_fb_info(info);
break;
}
done:
font->charcount = vga_512_chars ? 512 : 256;
if (!font->data)
return 0;
- return vgacon_do_font_op(&state, font->data, 0, 0);
+ return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
}
#else
unsigned int size_total;
int request_succeeded = 0;
- printk(KERN_INFO "efifb: probing for efifb\n");
-
if (!screen_info.lfb_depth)
screen_info.lfb_depth = 32;
if (!screen_info.pages)
screen_info.pages = 1;
+ if (!screen_info.lfb_base) {
+ printk(KERN_DEBUG "efifb: invalid framebuffer address\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "efifb: probing for efifb\n");
/* just assume they're all unset if any are */
if (!screen_info.blue_size) {
case 8:
return 0x0101010101010101ul*pixel;
case 12:
- return 0x0001001001001001ul*pixel;
+ return 0x1001001001001001ul*pixel;
case 16:
return 0x0001000100010001ul*pixel;
case 24:
- return 0x0000000001000001ul*pixel;
+ return 0x0001000001000001ul*pixel;
case 32:
return 0x0000000100000001ul*pixel;
default:
case 8:
return 0x01010101ul*pixel;
case 12:
- return 0x00001001ul*pixel;
+ return 0x01001001ul*pixel;
case 16:
return 0x00010001ul*pixel;
case 24:
- return 0x00000001ul*pixel;
+ return 0x01000001ul*pixel;
case 32:
return 0x00000001ul*pixel;
default:
#endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */
+#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG)
+#define _cpu_to_le_long(x) __cpu_to_le_long(x)
+#define __cpu_to_le_long(x) cpu_to_le##x
+
+#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG)
+#define _le_long_to_cpu(x) __le_long_to_cpu(x)
+#define __le_long_to_cpu(x) le##x##_to_cpu
+
+static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x)
+{
+ return (word << shift) | (word >> (x - shift));
+}
+
#endif /* FB_DRAW_H */
return -EINVAL;
con2fb.framebuffer = -1;
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
break;
case FBIOPUT_CON2FBMAP:
break;
}
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
break;
case FBIOBLANK:
if (!lock_fb_info(info))
registered_fb[i] = fb_info;
event.info = fb_info;
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+ unlock_fb_info(fb_info);
return 0;
}
goto done;
}
+
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ unlock_fb_info(fb_info);
if (ret) {
ret = -EINVAL;
{
struct fb_event event;
+ if (!lock_fb_info(info))
+ return;
event.info = info;
if (state) {
fb_notifier_call_chain(FB_EVENT_SUSPEND, &event);
info->state = FBINFO_STATE_RUNNING;
fb_notifier_call_chain(FB_EVENT_RESUME, &event);
}
+ unlock_fb_info(info);
}
/**
err = 1;
if (!list_empty(&info->modelist)) {
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
+ unlock_fb_info(info);
}
return err;
static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
static void *gbe_mem;
static dma_addr_t gbe_dma_addr;
-unsigned long gbe_mem_phys;
+static unsigned long gbe_mem_phys;
static struct {
uint16_t *cpu;
.vmode = FB_VMODE_NONINTERLACED,
};
-struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
static int flat_panel_enabled = 0;
* console.
*/
-void gbe_turn_off(void)
+static void gbe_turn_off(void)
{
int i;
unsigned int val, x, y, vpixen_off;
* Initialization
*/
-int __init gbefb_setup(char *options)
+static int __init gbefb_setup(char *options)
{
char *this_opt;
static struct platform_device *gbefb_device;
-int __init gbefb_init(void)
+static int __init gbefb_init(void)
{
int ret = platform_driver_register(&gbefb_driver);
if (!ret) {
return ret;
}
-void __exit gbefb_exit(void)
+static void __exit gbefb_exit(void)
{
platform_device_unregister(gbefb_device);
platform_driver_unregister(&gbefb_driver);
#define PCI_DEVICE_ID_INTEL_830M 0x3577
#define PCI_DEVICE_ID_INTEL_845G 0x2562
#define PCI_DEVICE_ID_INTEL_85XGM 0x3582
+#define PCI_DEVICE_ID_INTEL_854 0x358E
#define PCI_DEVICE_ID_INTEL_865G 0x2572
#define PCI_DEVICE_ID_INTEL_915G 0x2582
#define PCI_DEVICE_ID_INTEL_915GM 0x2592
INTEL_85XGM,
INTEL_852GM,
INTEL_852GME,
+ INTEL_854,
INTEL_855GM,
INTEL_855GME,
INTEL_865G,
switch(dinfo->chipset) {
case INTEL_830M:
case INTEL_845G:
+ case INTEL_854:
case INTEL_855GM:
case INTEL_865G:
dinfo->output[i].type = INTELFB_OUTPUT_DVO;
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
dinfo->mobile = 0;
dinfo->pll_index = PLLS_I8xx;
return 0;
+ case PCI_DEVICE_ID_INTEL_854:
+ dinfo->mobile = 1;
+ dinfo->name = "Intel(R) 854";
+ dinfo->chipset = INTEL_854;
+ return 0;
case PCI_DEVICE_ID_INTEL_85XGM:
tmp = 0;
dinfo->mobile = 1;
P3
-145 113
+# Standard 224-color Linux logo
+80 80
255
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 3 4 4 6 7 7
-8 10 10 8 10 10 6 8 8 6 7 7 3 4 4 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 4 5 5 17 18 17
-27 29 28 35 37 36 40 43 41 43 45 43 40 43 41 37 39 37
-32 34 33 27 30 29 23 25 24 17 21 21 15 18 18 12 15 15
-11 13 13 8 10 10 6 7 7 3 4 4 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 13 13 13 32 34 33 49 51 48 60 60 56 58 59 55
-55 57 54 55 56 53 49 51 48 43 45 43 39 40 39 33 37 35
-28 31 30 23 27 26 20 23 23 17 20 20 14 17 17 13 16 16
-11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 6 7 7
-2 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 12 15 15
-12 15 15 8 9 9 2 3 3 0 0 0 1 1 1 25 27 26
-55 56 53 68 70 65 65 66 61 65 66 61 63 64 60 63 64 60
-58 59 55 51 52 50 47 48 46 41 42 42 35 37 36 30 32 31
-26 28 27 20 24 24 18 22 22 16 19 19 14 17 17 13 16 16
-12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
-8 9 9 6 8 8 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 6 7 7 20 24 24 23 27 26
-23 27 26 18 22 22 11 13 13 23 24 24 61 63 57 72 73 67
-72 73 67 68 70 65 68 70 65 68 70 65 63 64 60 58 59 55
-55 56 53 47 48 46 41 42 42 35 37 36 30 32 31 26 28 27
-20 24 24 18 22 22 16 20 20 15 19 19 14 17 17 13 16 16
-12 15 15 12 15 15 11 14 14 10 13 13 10 12 12 9 11 11
-8 10 10 8 9 9 7 9 9 6 7 7 1 2 2 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 4 5 5 5 6 5 4 5 5
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 15 19 19 40 41 39 53 55 47
-33 36 34 27 30 29 51 52 50 72 73 67 72 73 67 72 73 67
-72 73 67 68 70 65 68 70 65 63 64 60 58 59 55 51 52 50
-47 48 46 40 43 41 33 37 35 30 32 31 26 28 27 20 24 24
-18 22 22 17 21 21 16 19 19 14 18 18 14 17 17 13 17 17
-13 16 16 12 15 15 12 15 15 11 14 14 10 13 13 10 12 12
-9 11 11 8 10 10 8 9 9 7 9 9 6 8 8 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-2 2 2 6 8 8 10 12 12 10 12 12 10 12 12 10 12 12
-6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 20 23 23 71 71 57 131 127 93
-115 113 82 63 64 60 72 73 67 72 73 67 72 73 67 72 73 67
-68 70 65 65 66 61 61 63 57 55 57 54 49 51 48 43 45 43
-39 40 39 33 36 34 28 31 30 23 27 26 20 24 24 20 23 23
-17 21 21 16 20 20 15 19 19 15 18 18 14 18 18 14 17 17
-13 17 17 13 16 16 12 15 15 12 15 15 11 14 14 10 13 13
-10 12 12 9 11 11 8 10 10 7 9 9 7 9 9 6 8 8
-4 5 5 0 0 0 0 0 0 0 0 0 1 1 1 6 7 7
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-10 12 12 3 4 4 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 18 22 22 71 71 57 144 139 99
-84 83 72 68 70 65 72 73 67 72 73 67 68 70 65 65 66 61
-63 64 60 55 57 54 51 52 50 47 48 46 40 43 41 35 37 36
-30 32 31 27 29 28 23 27 26 20 24 24 18 22 22 17 21 21
-16 20 20 15 19 19 15 19 19 15 19 19 15 18 18 14 18 18
-14 17 17 13 17 17 13 16 16 12 15 15 12 15 15 11 14 14
-10 13 13 9 12 12 9 11 11 8 10 10 7 9 9 6 8 8
-6 8 8 3 4 4 0 0 0 2 2 2 8 10 10 10 12 12
-10 12 12 10 12 12 11 13 13 36 38 35 61 61 53 48 49 45
-10 12 12 7 9 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 15 19 19 61 61 53 84 83 72
-68 70 65 72 73 67 68 70 65 68 70 65 63 64 60 58 59 55
-51 52 50 47 48 46 41 42 42 37 39 37 32 35 33 28 31 30
-23 27 26 20 24 24 20 23 23 18 22 22 17 21 21 17 21 21
-17 21 21 17 21 21 17 20 20 16 20 20 16 20 20 16 19 19
-15 18 18 14 18 18 13 17 17 13 16 16 12 15 15 12 15 15
-11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 7 9 9
-6 8 8 6 8 8 5 6 5 9 11 11 10 12 12 10 12 12
-19 20 18 82 81 62 149 145 103 160 154 106 142 137 94 96 95 69
-10 12 12 10 12 12 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 10 12 12 44 46 43 68 70 65
-72 73 67 68 70 65 68 70 65 63 64 60 55 57 54 49 51 48
-43 45 43 39 40 39 33 37 35 30 32 31 26 28 27 23 27 26
-20 24 24 18 22 22 18 22 22 18 22 22 18 22 22 20 23 23
-20 24 24 23 25 24 23 25 24 22 24 23 20 23 23 18 22 22
-17 20 20 15 19 19 15 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 11 13 13 10 12 12 9 11 11 8 10 10 8 9 9
-7 9 9 7 9 9 10 12 12 10 12 12 10 12 12 71 71 57
-164 159 111 186 182 128 186 182 128 171 165 117 151 147 98 96 95 69
-10 12 12 10 12 12 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 8 10 10 63 64 60 68 70 65
-72 73 67 68 70 65 63 64 60 55 57 54 47 48 46 40 43 41
-33 37 35 30 32 31 27 29 28 23 27 26 20 24 24 20 23 23
-18 22 22 18 22 22 20 23 22 21 25 23 23 27 26 27 29 28
-28 31 30 31 33 31 31 33 31 31 33 31 28 31 30 26 28 27
-23 25 24 20 23 22 16 20 20 15 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
-10 12 12 10 13 13 10 12 12 12 14 14 96 95 69 165 161 109
-186 182 128 192 187 134 192 187 134 176 171 126 160 154 106 103 101 77
-10 12 12 10 12 12 5 6 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 35 37 36 68 70 65 72 73 67
-68 70 65 65 66 61 58 59 55 49 51 48 40 43 41 33 37 35
-28 31 30 23 27 26 20 24 24 20 23 23 18 22 22 18 22 22
-18 22 22 20 23 23 23 27 26 27 30 29 32 35 33 37 39 37
-40 43 41 44 46 43 46 47 43 44 46 43 40 43 41 36 38 35
-31 33 31 27 29 28 22 24 23 17 21 21 15 18 18 14 17 17
-13 16 16 12 15 15 11 14 14 11 14 14 11 13 13 13 16 16
-13 16 16 11 14 14 10 12 12 79 78 62 142 137 94 164 159 111
-178 174 128 192 187 134 192 187 134 176 171 126 160 154 106 96 95 69
-10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 55 57 54 68 70 65 72 73 67
-68 70 65 63 64 60 55 56 53 43 45 43 35 37 36 28 31 30
-23 27 26 20 24 24 18 22 22 17 21 21 17 21 21 17 21 21
-20 24 24 25 27 26 31 33 31 38 39 37 46 47 43 53 55 47
-61 61 53 66 65 55 66 65 55 66 65 55 61 61 53 53 55 47
-46 47 43 37 39 37 30 33 30 24 26 24 17 21 21 15 18 18
-13 17 17 12 15 15 12 15 15 13 16 16 14 18 18 14 18 18
-14 17 17 12 15 15 30 31 28 118 116 76 134 131 96 160 154 106
-174 170 121 178 174 128 178 174 128 171 165 117 151 147 98 96 95 69
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 63 64 60 68 70 65 68 70 65
-65 66 61 58 59 55 49 51 48 39 40 39 30 32 31 23 27 26
-20 24 24 18 22 22 17 21 21 16 20 20 17 21 21 20 23 23
-25 27 26 32 35 33 43 44 41 53 55 47 66 65 55 75 75 61
-82 81 62 84 83 72 87 86 72 87 86 72 82 81 62 75 75 61
-66 65 55 53 55 47 40 41 39 31 33 31 23 25 24 17 20 20
-14 18 18 13 16 16 12 15 15 12 15 15 13 17 17 14 18 18
-14 18 18 13 16 16 46 47 43 96 95 69 125 122 87 142 137 94
-160 154 106 165 161 109 164 159 111 155 149 109 142 137 94 75 75 61
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 60 60 56 68 70 65 68 70 65
-63 64 60 55 57 54 46 47 45 35 37 36 27 30 29 23 25 24
-18 22 22 17 21 21 16 20 20 17 21 21 18 22 22 23 27 26
-31 33 31 43 44 41 55 56 53 71 71 57 84 83 72 92 91 72
-103 101 77 92 91 72 82 81 62 82 81 62 87 86 72 92 91 72
-84 83 72 71 71 57 55 56 53 43 44 41 30 33 30 22 24 23
-16 19 19 14 17 17 12 15 15 12 15 15 13 16 16 14 18 18
-14 18 18 14 17 17 43 44 41 82 81 62 118 116 76 125 122 87
-142 137 94 144 139 99 144 139 99 134 131 96 118 116 76 53 55 47
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 47 48 46 63 64 60 63 64 60
-55 57 54 49 51 48 40 43 41 32 34 33 26 28 27 20 24 24
-18 22 22 16 20 20 16 20 20 17 21 21 20 24 24 28 31 30
-40 41 39 53 55 47 75 75 61 90 89 73 87 86 72 48 49 45
-14 14 13 2 2 2 1 2 2 1 1 1 1 1 1 2 2 2
-19 20 18 43 44 41 66 65 55 53 55 47 38 39 37 26 28 27
-18 22 22 14 18 18 13 16 16 12 15 15 12 15 15 13 17 17
-14 18 18 14 18 18 30 31 28 66 65 55 96 95 69 103 101 77
-118 116 76 118 116 76 118 116 76 118 116 76 103 101 77 36 38 35
-10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 28 31 30 55 57 54 51 52 50
-49 51 48 41 42 42 35 37 36 28 31 30 23 27 26 20 23 23
-17 21 21 16 20 20 16 20 20 18 22 22 23 27 26 33 36 34
-48 49 45 71 71 57 82 81 62 43 44 41 8 9 9 6 7 7
-6 7 7 6 7 7 6 7 7 5 6 5 4 5 5 3 4 4
-2 3 3 1 2 2 4 5 4 36 38 35 48 49 45 32 35 33
-21 25 23 16 19 19 13 17 17 12 15 15 12 15 15 13 16 16
-14 18 18 14 18 18 16 18 16 36 38 35 61 61 53 82 81 62
-96 95 69 96 95 69 96 95 69 96 95 69 79 78 62 19 20 18
-10 12 12 10 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 13 13 46 47 45 43 45 43
-40 43 41 35 37 36 30 32 31 23 27 26 20 24 24 18 22 22
-17 21 21 16 20 20 17 21 21 20 23 23 27 30 29 40 41 39
-61 61 53 53 55 47 16 17 16 9 11 11 10 12 12 10 12 12
-10 12 12 10 12 12 10 12 12 9 11 11 8 10 10 8 9 9
-6 8 8 5 6 5 4 5 5 2 3 3 19 20 18 38 39 37
-26 28 27 17 21 21 14 17 17 13 16 16 12 15 15 12 15 15
-13 17 17 14 18 18 12 15 15 13 12 7 30 31 28 46 47 43
-53 55 47 66 65 55 66 65 55 53 55 47 36 38 35 10 12 12
-10 12 12 10 12 12 2 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 1 33 37 35 35 37 36
-32 35 33 28 31 30 23 27 26 20 24 24 18 22 22 17 21 21
-16 20 20 16 20 20 17 21 21 21 25 23 31 33 31 44 46 43
-31 33 31 11 13 13 12 14 14 12 15 15 13 16 16 14 17 17
-14 17 17 14 17 17 14 17 17 13 16 16 12 15 15 12 14 14
-11 13 13 9 11 11 8 10 10 6 8 8 4 5 5 17 18 17
-30 33 30 20 23 22 15 18 18 13 16 16 12 15 15 12 14 14
-13 16 16 14 17 17 14 18 18 11 12 11 7 7 5 16 17 12
-21 22 20 30 31 28 25 27 25 21 22 20 14 14 13 10 12 12
-10 12 12 9 11 11 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 18 22 22 27 30 29
-27 29 28 40 41 39 53 55 47 53 55 47 53 55 47 46 47 43
-25 27 25 16 20 20 17 21 21 23 25 24 31 33 31 20 20 20
-12 15 15 14 17 17 15 19 19 16 20 20 17 21 21 18 22 22
-18 22 22 18 22 22 18 22 22 17 21 21 17 21 21 16 19 19
-15 18 18 13 16 16 12 15 15 10 12 12 8 10 10 6 8 8
-21 22 21 22 24 23 15 19 19 13 17 17 13 16 16 12 15 15
-12 15 15 13 17 17 14 18 18 14 18 18 13 15 14 10 9 6
-7 7 5 7 7 5 7 7 5 9 11 11 10 12 12 10 12 12
-10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 82 81 62
-118 116 76 118 116 76 161 156 96 161 156 96 161 156 96 118 116 76
-118 116 76 96 95 69 53 55 47 22 24 23 14 17 17 13 16 16
-15 19 19 17 21 21 18 22 22 20 24 24 20 24 24 23 27 26
-23 27 26 23 27 26 23 27 26 23 27 26 23 27 26 20 24 24
-20 23 23 17 21 21 16 19 19 14 17 17 12 15 15 10 12 12
-9 11 11 20 23 22 16 19 19 14 17 17 13 16 16 12 15 15
-11 14 14 13 16 16 14 17 17 14 18 18 14 17 17 12 15 15
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-9 11 11 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 53 55 47 161 156 96
-161 156 96 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 96 95 69 21 22 20 16 19 19
-18 22 22 20 24 24 23 27 26 23 27 26 26 28 27 27 30 29
-27 30 29 18 22 22 12 14 14 8 10 10 9 11 11 17 21 21
-23 27 26 23 27 26 20 24 24 18 22 22 16 20 20 14 17 17
-12 14 14 14 17 17 16 20 20 14 17 17 13 17 17 13 16 16
-12 15 15 12 15 15 13 17 17 14 18 18 14 17 17 13 16 16
-11 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 12 7 118 116 76 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 30 31 28
-20 24 24 23 27 26 27 30 29 28 31 30 30 32 31 23 27 26
-16 19 19 17 21 21 12 15 15 9 11 11 10 12 12 9 11 11
-20 24 24 28 31 30 26 28 27 23 27 26 20 24 24 17 21 21
-15 19 19 13 16 16 16 19 19 14 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 13 16 16 14 17 17 14 18 18 14 17 17
-12 15 15 10 12 12 10 12 12 10 12 12 10 12 12 8 9 9
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 82 81 62 161 156 96 230 229 82
-230 229 82 233 233 100 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 118 116 76
-27 29 28 27 30 29 30 32 31 30 32 31 23 27 26 20 24 24
-26 28 27 17 21 21 6 7 7 72 73 67 145 141 105 15 15 15
-14 17 17 33 37 35 30 32 31 28 31 30 26 28 27 23 27 26
-20 23 23 16 20 20 15 19 19 14 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 12 15 15 13 17 17 14 18 18 14 17 17
-13 16 16 11 13 13 10 12 12 10 12 12 9 11 11 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 16 17 12 161 156 96 230 229 82 230 229 82
-243 242 120 235 234 117 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-82 81 62 28 31 30 28 31 30 27 30 29 28 31 30 30 32 31
-33 37 35 13 16 16 3 3 3 105 104 92 210 208 158 12 14 14
-17 21 21 33 37 35 33 37 35 32 35 33 30 32 31 27 30 29
-23 27 26 20 23 23 17 20 20 15 18 18 14 18 18 13 17 17
-13 16 16 12 15 15 11 14 14 13 16 16 14 17 17 14 18 18
-13 17 17 12 15 15 10 12 12 10 12 12 3 4 4 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 96 95 69 230 229 82 230 229 82 244 244 132
-241 241 143 243 242 120 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-161 156 96 46 47 43 32 35 33 33 37 35 33 37 35 33 37 35
-40 43 41 23 27 26 1 1 1 2 2 2 24 26 24 14 17 17
-23 27 26 33 37 35 33 37 35 33 37 35 33 37 35 30 32 31
-27 30 29 23 27 26 20 23 23 15 18 18 14 18 18 14 17 17
-13 16 16 12 15 15 11 14 14 12 15 15 13 17 17 14 17 17
-14 17 17 13 16 16 11 13 13 6 8 8 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 16 17 12 161 156 96 230 229 82 235 234 117 239 239 170
-239 239 170 236 236 101 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 118 116 76 33 37 35 33 37 35 37 39 37 37 39 37
-43 45 43 49 51 48 20 24 24 8 10 10 17 20 20 35 37 36
-33 37 35 40 43 41 37 39 37 35 37 36 33 37 35 33 37 35
-30 32 31 27 30 29 23 27 26 15 19 19 14 18 18 14 17 17
-13 17 17 13 16 16 12 15 15 11 14 14 13 16 16 14 17 17
-14 17 17 13 17 17 11 14 14 4 5 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 96 95 69 230 229 82 230 229 82 239 239 170 251 251 187
-241 241 143 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 36 38 35 33 37 35 33 37 35 33 37 35
-37 39 37 47 48 46 55 57 54 55 57 54 49 51 48 43 45 43
-43 45 43 43 45 43 40 43 41 40 43 41 37 39 37 33 37 35
-33 37 35 28 31 30 26 28 27 16 20 20 15 18 18 14 18 18
-14 17 17 13 16 16 12 15 15 11 14 14 12 15 15 13 17 17
-14 17 17 14 17 17 8 10 10 5 7 7 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 17 12 230 229 82 230 229 82 243 242 120 251 251 187 251 251 187
-246 246 123 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 66 65 55 30 32 31 32 35 33 33 37 35
-33 37 35 37 39 37 40 43 41 47 48 46 49 51 48 51 52 50
-55 57 54 55 57 54 51 52 50 47 48 46 43 45 43 39 40 39
-33 37 35 30 32 31 26 28 27 17 21 21 15 19 19 14 18 18
-14 17 17 13 16 16 12 15 15 12 14 14 11 14 14 13 16 16
-14 17 17 12 15 15 7 9 9 6 8 8 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-96 95 69 230 229 82 230 229 82 239 239 170 251 251 187 239 239 170
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 96 95 69 27 30 29 28 31 30 30 32 31
-33 37 35 40 43 41 46 47 45 55 57 54 63 64 60 72 73 67
-72 73 67 72 73 67 72 73 67 65 66 61 55 57 54 47 48 46
-39 40 39 32 35 33 27 30 29 17 21 21 15 19 19 15 18 18
-14 18 18 13 17 17 13 16 16 12 15 15 11 14 14 12 14 14
-13 16 16 9 11 11 7 9 9 9 11 11 66 65 55 115 113 82
-21 22 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 12 7
-230 229 82 230 229 82 236 236 101 251 251 187 251 251 187 246 246 123
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 118 116 76 23 27 26 26 28 27 32 35 33
-51 52 50 90 89 73 110 109 94 145 141 105 168 163 120 177 172 135
-177 172 135 188 184 146 188 184 146 181 176 137 194 191 148 188 184 146
-184 179 149 188 184 146 188 184 146 156 151 111 177 172 135 181 176 137
-177 172 135 168 163 120 168 163 120 158 153 112 156 151 111 158 153 112
-156 151 111 158 153 112 177 172 135 188 184 146 188 184 146 194 189 146
-36 38 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 82 81 62
-230 229 82 230 229 82 244 244 132 251 251 187 244 244 132 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 82 81 62
-96 95 69 230 229 82 181 178 103 110 109 94 156 151 111 188 184 146
-188 184 146 197 193 154 188 184 146 184 181 136 188 184 146 168 163 120
-168 163 120 178 174 128 156 151 111 158 153 112 174 170 121 156 151 111
-156 151 111 158 153 112 156 151 111 168 163 120 178 174 128 181 176 137
-176 171 126 178 174 128 184 181 136 176 171 126 178 174 128 184 181 136
-176 171 126 178 174 128 184 181 136 164 159 111 155 149 109 96 95 69
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 2 2 1 161 156 96
-230 229 82 230 229 82 244 244 132 244 244 132 236 236 101 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 46 47 43 82 81 62
-158 153 112 197 193 154 194 189 146 184 181 136 188 184 146 168 163 120
-156 151 111 137 133 100 131 127 93 137 133 100 137 133 100 158 153 112
-121 119 87 137 133 100 156 151 111 145 141 105 99 98 80 84 83 72
-63 64 60 52 53 49 40 43 41 33 36 34 36 38 35 36 38 35
-38 39 37 43 44 41 43 44 41 46 47 43 48 49 45 48 49 45
-46 47 43 36 38 35 30 31 28 19 20 18 6 7 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 230 229 82
-230 229 82 230 229 82 246 246 123 236 236 101 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 53 55 47 121 119 87
-176 171 126 171 165 117 161 156 96 82 81 62 53 55 47 33 37 35
-39 40 39 63 64 60 99 98 80 121 119 87 137 133 100 177 172 135
-176 171 126 184 181 136 131 127 93 131 127 93 110 109 94 84 83 72
-51 52 50 39 40 39 27 29 28 18 22 22 16 19 19 15 19 19
-15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 11 14 14
-10 13 13 9 12 12 9 11 11 8 9 9 7 9 9 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
-230 229 82 230 229 82 236 236 101 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 96 95 69 71 71 57
-36 38 35 118 116 76 118 116 76 12 15 15 15 18 18 20 24 24
-33 37 35 55 56 53 84 83 72 110 109 94 145 141 105 110 109 94
-168 163 120 121 119 87 156 151 111 131 127 93 87 86 72 61 63 57
-47 48 46 28 31 30 18 22 22 15 19 19 15 18 18 15 19 19
-15 19 19 14 18 18 14 17 17 13 17 17 13 16 16 12 15 15
-11 13 13 10 12 12 9 11 11 8 10 10 7 9 9 3 3 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 0 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-161 156 96 230 229 82 118 116 76 11 14 14 14 17 17 18 22 22
-27 30 29 40 43 41 60 60 56 84 83 72 105 104 92 110 109 94
-110 109 94 110 109 94 99 98 80 90 89 73 68 70 65 47 48 46
-32 34 33 23 25 24 20 23 23 17 21 21 15 19 19 14 17 17
-15 19 19 15 18 18 14 18 18 13 17 17 13 16 16 12 15 15
-11 14 14 10 12 12 9 11 11 8 10 10 7 9 9 4 5 5
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 11 13 13 13 16 16 15 19 19
-20 24 24 30 32 31 40 43 41 51 52 50 63 64 60 72 73 67
-65 66 61 65 66 61 65 66 61 55 57 54 46 47 45 33 37 35
-27 29 28 20 24 24 17 21 21 16 20 20 16 20 20 15 19 19
-15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 10 13 13 9 12 12 8 10 10 7 9 9 6 7 7
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 53 55 47 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-161 156 96 118 116 76 53 55 47 10 13 13 12 15 15 14 17 17
-17 20 20 20 24 24 27 29 28 32 34 33 37 39 37 40 43 41
-43 45 43 41 42 42 35 37 36 30 32 31 28 31 30 23 27 26
-20 23 23 17 21 21 16 20 20 16 20 20 16 20 20 16 19 19
-15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 10 12 12
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 82 81 62 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
-118 116 76 82 81 62 13 14 12 10 13 13 12 15 15 13 17 17
-15 19 19 16 20 20 20 23 23 20 24 24 23 27 26 26 28 27
-26 28 27 26 28 27 23 27 26 18 22 22 20 23 23 17 21 21
-17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 19 19
-15 19 19 15 19 19 15 18 18 14 17 17 13 17 17 13 16 16
-12 15 15 12 14 14 12 14 14 12 14 14 12 14 14 23 24 24
-6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 118 116 76
-71 71 57 13 14 12 9 12 12 10 13 13 12 15 15 13 17 17
-15 18 18 15 19 19 16 20 20 17 21 21 17 21 21 18 22 22
-18 22 22 18 22 22 17 21 21 16 19 19 15 18 18 14 18 18
-16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 15 19 19 15 18 18 14 18 18 16 20 20 23 25 24
-17 21 21 25 27 26 47 48 46 47 48 46 51 52 50 72 73 67
-33 36 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 161 156 96 118 116 76 118 116 76 46 47 43
-9 11 11 9 11 11 10 12 12 11 13 13 12 15 15 14 17 17
-15 18 18 15 19 19 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 16 20 20 20 24 24 55 56 53 32 34 33 84 83 72
-90 89 73 110 109 94 110 109 94 105 104 92 110 109 94 110 109 94
-72 73 67 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 96 95 69 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 82 81 62 16 17 12 9 11 11
-9 11 11 9 12 12 10 13 13 12 14 14 13 16 16 14 18 18
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 19 19 33 36 34 99 98 80 156 151 111 145 141 105 184 179 149
-168 163 120 184 179 149 177 172 135 156 151 111 145 141 105 110 109 94
-90 89 73 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 71 71 57 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 230 229 82 230 229 82 230 229 82 161 156 96
-118 116 76 82 81 62 30 31 28 9 11 11 9 11 11 9 11 11
-10 12 12 10 13 13 11 14 14 13 16 16 14 17 17 15 18 18
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-18 22 22 58 59 55 137 133 100 197 193 154 214 212 158 210 208 158
-197 193 154 184 179 149 184 179 149 137 133 100 110 109 94 99 98 80
-84 83 72 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-161 156 96 161 156 96 161 156 96 161 156 96 118 116 76 71 71 57
-21 22 20 12 14 14 11 13 13 10 12 12 10 12 12 10 13 13
-11 13 13 12 15 15 13 16 16 14 17 17 14 18 18 15 19 19
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 17 21 21
-23 27 26 84 83 72 184 179 149 251 251 187 210 208 158 184 179 149
-184 179 149 156 151 111 110 109 94 84 83 72 63 64 60 51 52 50
-18 22 22 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
-161 156 96 161 156 96 118 116 76 53 55 47 20 23 22 16 19 19
-13 16 16 12 15 15 12 14 14 11 14 14 11 14 14 11 14 14
-12 15 15 13 16 16 14 17 17 15 19 19 16 20 20 17 21 21
-23 27 26 18 22 22 20 24 24 23 27 26 30 32 31 17 21 21
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-23 27 26 33 37 35 137 133 100 156 151 111 158 153 112 105 104 92
-105 104 92 68 70 65 39 40 39 18 22 22 12 14 14 12 15 15
-9 11 11 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 118 116 76
-118 116 76 66 65 55 43 45 43 32 34 33 25 27 26 20 23 22
-17 20 20 15 18 18 14 17 17 15 18 18 13 16 16 14 17 17
-14 18 18 16 20 20 32 34 33 55 57 54 58 59 55 72 73 67
-105 104 92 55 57 54 65 66 61 63 64 60 40 43 41 33 37 35
-41 42 42 20 24 24 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-17 21 21 26 28 27 30 32 31 35 37 36 68 70 65 39 40 39
-23 27 26 15 18 18 13 16 16 11 14 14 9 12 12 8 10 10
-7 9 9 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
-230 229 82 230 229 82 230 229 82 96 95 69 30 31 28 49 51 48
-90 89 73 68 70 65 55 57 54 47 48 46 47 48 46 43 45 43
-32 34 33 43 45 43 43 45 43 23 27 26 25 27 26 40 43 41
-40 43 41 90 89 73 110 109 94 145 141 105 156 151 111 156 151 111
-184 179 149 184 179 149 177 172 135 184 179 149 137 133 100 84 83 72
-105 104 92 63 64 60 49 51 48 47 48 46 28 31 30 18 22 22
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 15 19 19 15 19 19 15 19 19 18 22 22 15 19 19
-13 16 16 12 15 15 11 14 14 10 13 13 9 12 12 9 11 11
-8 10 10 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-30 31 28 230 229 82 71 71 57 2 2 1 0 0 0 58 59 55
-105 104 92 84 83 72 65 66 61 84 83 72 110 109 94 110 109 94
-145 141 105 105 104 92 110 109 94 110 109 94 84 83 72 110 109 94
-158 153 112 197 193 154 197 193 154 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 197 193 154
-197 193 154 184 179 149 145 141 105 137 133 100 105 104 92 47 48 46
-20 23 23 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 19 19 15 19 19 15 19 19 14 18 18 14 17 17
-13 17 17 13 16 16 12 14 14 12 14 14 13 13 13 13 13 13
-13 13 13 12 12 12 10 10 9 6 7 7 2 2 2 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 65 66 61
-105 104 92 84 83 72 84 83 72 110 109 94 184 179 149 210 208 158
-210 208 158 210 208 158 214 212 158 197 193 154 214 212 158 210 208 158
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 251 251 187 184 179 149 84 83 72
-26 28 27 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
-13 17 17 13 16 16 15 15 15 14 14 13 14 14 13 14 14 13
-13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 73 67
-105 104 92 99 98 80 84 83 72 99 98 80 177 172 135 197 193 154
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 214 212 158 197 193 154 99 98 80
-23 27 26 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
-14 17 17 16 16 16 16 16 16 16 16 16 15 15 15 14 14 13
-14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 84 83 72
-110 109 94 99 98 80 72 73 67 63 64 60 99 98 80 177 172 135
-184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 210 208 158 184 179 149 177 172 135 110 109 94 33 37 35
-17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 19 19 14 18 18
-15 18 18 18 19 18 18 19 18 17 17 17 16 16 16 15 15 15
-14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
-10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 105 104 92
-108 107 93 99 98 80 72 73 67 63 64 60 51 52 50 87 86 72
-105 104 92 110 109 94 108 107 93 156 151 111 184 179 149 184 179 149
-197 193 154 197 193 154 197 193 154 184 179 149 184 179 149 177 172 135
-197 193 154 156 151 111 177 172 135 184 179 149 168 163 120 137 133 100
-145 141 105 110 109 94 99 98 80 47 48 46 55 57 54 15 19 19
-16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-17 20 20 17 21 21 16 20 20 16 19 19 15 19 19 16 19 19
-20 20 20 21 22 21 20 20 20 19 20 19 18 19 18 16 16 16
-15 15 15 14 14 13 13 13 13 13 13 13 12 12 12 12 12 12
-12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 58 59 55 110 109 94
-105 104 92 90 89 73 72 73 67 55 57 54 43 45 43 39 40 39
-43 45 43 46 47 45 43 45 43 68 70 65 65 66 61 63 64 60
-108 107 93 72 73 67 105 104 92 90 89 73 72 73 67 40 43 41
-72 73 67 68 70 65 68 70 65 58 59 55 63 64 60 49 51 48
-43 45 43 33 36 34 27 30 29 20 24 24 16 20 20 15 19 19
-15 19 19 15 19 19 15 19 19 16 19 19 16 20 20 16 20 20
-17 21 21 20 24 24 20 23 22 17 21 21 17 20 20 20 20 20
-21 22 21 21 22 21 21 22 21 21 22 21 20 20 20 18 19 18
-16 16 16 15 15 15 13 13 13 13 13 13 12 12 12 12 12 12
-12 12 12 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 21 22 21 110 109 94 110 109 94
-105 104 92 84 83 72 68 70 65 51 52 50 41 42 42 33 37 35
-28 31 30 23 27 26 20 23 23 18 22 22 17 20 20 25 27 26
-26 28 27 27 30 29 25 27 26 20 23 23 23 27 26 30 32 31
-20 24 24 17 21 21 18 22 22 15 19 19 26 28 27 20 23 23
-14 18 18 15 19 19 15 18 18 15 19 19 15 19 19 15 19 19
-15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 16 19 19
-16 20 20 22 24 23 24 26 24 22 24 23 20 23 22 22 24 23
-24 26 24 24 26 24 23 24 24 22 24 23 21 22 21 19 20 19
-17 17 17 15 15 15 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 2 2 2 99 98 80 110 109 94 108 107 93
-105 104 92 84 83 72 63 64 60 49 51 48 39 40 39 32 34 33
-27 30 29 23 25 24 20 23 23 17 20 20 15 19 19 14 18 18
-14 17 17 13 17 17 13 17 17 13 17 17 13 17 17 13 17 17
-14 17 17 14 17 17 14 17 17 14 17 17 14 17 17 14 17 17
-14 18 18 14 18 18 14 18 18 14 18 18 15 18 18 15 19 19
-15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 15 19 19
-15 19 19 17 21 21 27 29 28 26 28 27 25 27 26 25 27 26
-27 29 28 27 29 28 26 28 27 24 26 24 21 22 21 20 20 20
-18 19 18 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 51 52 50 110 109 94 110 109 94 105 104 92
-90 89 73 72 73 67 55 57 54 43 45 43 35 37 36 30 32 31
-26 28 27 20 24 24 17 21 21 16 19 19 15 18 18 14 17 17
-13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
-14 17 17 14 17 17 14 17 17 14 18 18 14 18 18 14 18 18
-15 18 18 15 18 18 15 19 19 15 19 19 15 19 19 15 19 19
-15 19 19 15 19 19 27 29 28 32 34 33 28 31 30 27 29 28
-30 32 31 30 32 31 30 31 28 26 28 27 23 24 24 21 22 21
-19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 3 3 3 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 10 10 9 108 107 93 110 109 94 108 107 93 99 98 80
-84 83 72 63 64 60 49 51 48 40 43 41 33 36 34 27 30 29
-23 27 26 18 22 22 17 20 20 15 18 18 14 17 17 13 16 16
-13 16 16 13 16 16 12 15 15 12 15 15 12 15 15 12 15 15
-13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 17 17 13 17 17 14 17 17 14 17 17 14 17 17 14 18 18
-14 18 18 14 18 18 15 18 18 15 18 18 15 19 19 15 19 19
-15 19 19 15 19 19 17 21 21 33 36 34 32 34 33 31 33 31
-33 36 34 33 36 34 31 33 31 27 29 28 25 27 26 21 22 21
-19 20 19 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 63 64 60 137 133 100 43 45 43 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 68 70 65 110 109 94 110 109 94 105 104 92 84 83 72
-68 70 65 55 57 54 43 45 43 35 37 36 30 32 31 26 28 27
-20 24 24 17 21 21 16 19 19 14 17 17 13 16 16 12 15 15
-12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15
-12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
-13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
-14 17 17 14 17 17 14 18 18 14 18 18 14 18 18 15 18 18
-15 19 19 15 19 19 15 19 19 20 24 24 32 34 33 35 37 36
-37 39 37 35 37 36 33 36 34 30 32 31 26 28 27 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-1 1 1 99 98 80 184 179 149 184 179 149 68 70 65 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 15 15 110 109 94 110 109 94 108 107 93 99 98 80 72 73 67
-61 63 57 49 51 48 39 40 39 33 36 34 27 30 29 23 25 24
-18 22 22 16 19 19 14 17 17 13 16 16 12 15 15 12 15 15
-11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
-11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
-12 15 15 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 17 17 14 17 17 14 17 17 14 17 17 14 18 18 14 18 18
-14 18 18 15 18 18 15 19 19 15 19 19 30 32 31 38 39 37
-39 40 39 39 40 39 35 37 36 31 33 31 27 29 28 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
-110 109 94 197 193 154 210 208 158 184 179 149 68 70 65 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-68 70 65 110 109 94 110 109 94 105 104 92 84 83 72 65 66 61
-51 52 50 43 45 43 35 37 36 30 32 31 25 27 26 20 23 23
-17 20 20 15 18 18 13 16 16 12 15 15 12 15 15 11 14 14
-11 14 14 11 14 14 11 13 13 11 13 13 11 13 13 11 13 13
-11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
-12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 13 16 16
-13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 14 17 17
-14 18 18 14 18 18 14 18 18 16 19 19 37 39 37 41 42 42
-41 42 42 41 42 42 38 39 37 32 34 33 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 137 133 100
-197 193 154 251 251 187 239 239 170 184 179 149 31 33 31 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 12
-110 109 94 110 109 94 105 104 92 90 89 73 72 73 67 58 59 55
-46 47 45 37 39 37 31 33 31 26 28 27 20 24 24 17 21 21
-15 18 18 13 16 16 12 15 15 12 14 14 11 13 13 11 13 13
-10 13 13 10 13 13 10 13 13 10 13 13 10 13 13 10 13 13
-10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
-13 16 16 13 16 16 13 16 16 13 16 16 13 17 17 13 17 17
-14 17 17 14 17 17 14 18 18 23 27 26 41 42 42 41 42 42
-43 45 43 41 42 42 39 40 39 33 36 34 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 27 29 28 168 163 120 210 208 158
-251 251 187 251 251 187 210 208 158 137 133 100 1 1 1 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 60 60 56
-110 109 94 105 104 92 105 104 92 84 83 72 65 66 61 51 52 50
-40 43 41 33 36 34 27 30 29 23 25 24 18 22 22 16 19 19
-14 17 17 12 15 15 11 14 14 11 14 14 10 13 13 10 13 13
-10 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
-11 13 13 11 14 14 11 14 14 11 14 14 11 14 14 12 15 15
-12 15 15 12 15 15 12 15 15 13 16 16 13 16 16 13 16 16
-13 17 17 13 17 17 14 17 17 32 34 33 43 45 43 43 45 43
-43 45 43 43 45 43 39 40 39 33 36 34 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 68 70 65 184 179 149 210 208 158 251 251 187
-251 251 187 214 212 158 184 179 149 37 39 37 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 105 104 92
-105 104 92 105 104 92 99 98 80 72 73 67 58 59 55 46 47 45
-35 37 36 30 32 31 25 27 26 20 23 23 16 19 19 14 17 17
-12 15 15 12 14 14 11 13 13 10 13 13 10 12 12 10 12 12
-10 12 12 10 12 12 9 12 12 9 12 12 9 12 12 9 12 12
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 13 13
-10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
-13 16 16 13 16 16 17 20 20 41 42 42 46 47 45 46 47 45
-46 47 45 43 45 43 40 41 39 33 36 34 27 29 28 23 24 24
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 15 15 110 109 94 197 193 154 214 212 158 251 251 187 251 251 187
-239 239 170 184 179 149 84 83 72 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 47 48 46 105 104 92
-105 104 92 99 98 80 84 83 72 68 70 65 51 52 50 40 43 41
-32 34 33 27 29 28 22 24 23 17 21 21 15 18 18 13 16 16
-12 15 15 11 13 13 10 13 13 10 12 12 9 12 12 9 12 12
-9 12 12 9 12 12 9 11 11 9 11 11 9 11 11 9 11 11
-9 12 12 9 12 12 9 12 12 9 12 12 10 12 12 10 12 12
-10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
-11 14 14 11 14 14 11 14 14 12 14 14 12 15 15 12 15 15
-12 15 15 13 16 16 28 31 30 43 45 43 47 48 46 47 48 46
-47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 3 4 4 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 60 60 56
-177 172 135 197 193 154 251 251 187 251 251 187 251 251 187 251 251 187
-184 179 149 110 109 94 3 4 4 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 1 99 98 80 105 104 92
-99 98 80 87 86 72 84 83 72 63 64 60 46 47 45 35 37 36
-30 32 31 25 27 26 18 22 22 16 19 19 14 17 17 12 15 15
-11 14 14 10 13 13 9 12 12 9 12 12 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 12 12 9 12 12
-9 12 12 10 12 12 10 12 12 10 12 12 10 13 13 10 13 13
-10 13 13 11 13 13 11 14 14 11 14 14 11 14 14 12 15 15
-12 15 15 14 17 17 41 42 42 47 48 46 49 51 48 51 52 50
-47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
-19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 23 24 24 137 133 100 184 179 149
-210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 184 179 149
-110 109 94 13 13 13 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 30 32 31 105 104 92 99 98 80
-84 83 72 84 83 72 72 73 67 55 57 54 41 42 42 32 34 33
-27 29 28 20 24 24 17 20 20 14 17 17 13 16 16 12 14 14
-10 13 13 10 12 12 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 12 12 9 12 12 10 12 12 10 12 12 10 12 12
-10 13 13 10 13 13 10 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 27 29 28 55 56 53 72 73 67 51 52 50 51 52 50
-49 51 48 43 45 43 39 40 39 32 34 33 26 28 27 21 22 21
-19 20 19 16 16 16 18 19 17 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 8 8 7 84 83 72 184 179 149 197 193 154 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 184 179 149 145 141 105
-19 20 19 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 14 14 13 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 72 73 67 105 104 92 84 83 72
-72 73 67 84 83 72 68 70 65 49 51 48 39 40 39 30 32 31
-25 27 26 18 22 22 15 18 18 13 16 16 12 15 15 11 13 13
-10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 12 12 9 12 12 9 12 12
-10 12 12 10 12 12 10 12 12 10 13 13 10 13 13 11 13 13
-13 16 16 41 42 42 99 98 80 158 153 112 65 66 61 51 52 50
-49 51 48 43 45 43 39 40 39 31 33 31 25 27 26 21 22 21
-21 22 21 68 70 65 55 56 53 13 13 13 12 12 12 12 12 12
-12 12 12 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
-63 64 60 158 153 112 184 179 149 210 208 158 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 184 179 149 137 133 100 27 29 28
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-21 22 21 110 109 94 5 6 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 13 13 13 105 104 92 90 89 73 72 73 67
-68 70 65 84 83 72 63 64 60 46 47 45 35 37 36 27 29 28
-22 24 23 17 20 20 14 17 17 12 15 15 11 14 14 10 12 12
-10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 12 12 9 12 12 10 12 12 10 12 12 10 13 13 10 13 13
-30 32 31 47 48 46 177 172 135 210 208 158 137 133 100 55 56 53
-49 51 48 43 45 43 38 39 37 31 33 31 25 27 26 22 24 23
-110 109 94 184 179 149 63 64 60 13 13 13 12 12 12 12 12 12
-12 12 12 8 9 9 0 0 0 1 1 1 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 21 22 21 105 104 92
-184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 184 179 149 145 141 105 23 24 24 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-68 70 65 184 179 149 105 104 92 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 51 52 50 99 98 80 84 83 72 63 64 60
-68 70 65 72 73 67 55 57 54 41 42 42 32 34 33 25 27 26
-20 23 23 16 19 19 13 16 16 12 14 14 10 13 13 10 12 12
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 12 12 9 12 12 10 12 12 17 20 20
-46 47 45 72 73 67 210 208 158 251 251 187 210 208 158 63 64 60
-49 51 48 43 45 43 37 39 37 30 32 31 24 26 24 105 104 92
-210 208 158 197 193 154 47 48 46 13 13 13 12 12 12 12 12 12
-12 12 12 6 7 7 33 36 34 48 49 45 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 8 8 7 23 24 24 55 56 53 110 109 94
-210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 184 179 149 110 109 94 20 20 20 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-110 109 94 251 251 187 210 208 158 47 48 46 0 0 0 0 0 0
-0 0 0 1 1 1 90 89 73 90 89 73 72 73 67 55 56 53
-72 73 67 68 70 65 51 52 50 37 39 37 28 31 30 23 25 24
-17 21 21 15 18 18 12 15 15 11 14 14 10 13 13 9 12 12
-9 11 11 9 11 11 9 11 11 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 12 12 13 16 16 41 42 42
-49 51 48 110 109 94 251 251 187 251 251 187 251 251 187 105 104 92
-49 51 48 43 45 43 35 37 36 30 31 28 47 48 46 197 193 154
-251 251 187 197 193 154 31 33 31 12 12 12 12 12 12 12 12 12
-12 12 12 51 52 50 184 179 149 72 73 67 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2
-11 11 11 21 22 21 30 32 31 40 41 39 60 60 56 145 141 105
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-184 179 149 110 109 94 13 13 13 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 4 5 4 61 61 53 48 49 45 3 4 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-156 151 111 251 251 187 251 251 187 184 179 149 11 11 11 0 0 0
-0 0 0 26 28 27 99 98 80 84 83 72 60 60 56 43 45 43
-72 73 67 65 66 61 49 51 48 35 37 36 27 29 28 20 24 24
-17 20 20 14 17 17 12 15 15 11 13 13 10 12 12 9 11 11
-9 11 11 9 11 11 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 11 13 13 37 39 37 47 48 46
-51 52 50 184 179 149 251 251 187 251 251 187 251 251 187 145 141 105
-47 48 46 41 42 42 35 37 36 27 29 28 137 133 100 251 251 187
-251 251 187 197 193 154 19 20 19 12 12 12 12 12 12 12 12 12
-27 29 28 184 179 149 214 212 158 63 64 60 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 6 7 7 16 16 16 24 26 24
-30 32 31 38 39 37 47 48 46 55 57 54 68 70 65 110 109 94
-197 193 154 251 251 187 251 251 187 251 251 187 210 208 158 184 179 149
-105 104 92 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 65 66 61 184 179 149 156 151 111
-30 32 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-168 163 120 251 251 187 251 251 187 251 251 187 110 109 94 0 0 0
-0 0 0 60 60 56 84 83 72 68 70 65 51 52 50 38 39 37
-84 83 72 63 64 60 43 45 43 33 36 34 25 27 26 20 23 22
-15 18 18 13 16 16 12 14 14 10 13 13 9 12 12 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-9 11 11 9 11 11 10 12 12 33 36 34 46 47 45 51 52 50
-72 73 67 210 208 158 251 251 187 251 251 187 251 251 187 177 172 135
-47 48 46 41 42 42 35 37 36 37 39 37 184 179 149 251 251 187
-251 251 187 197 193 154 13 13 13 12 12 12 12 12 12 12 12 12
-110 109 94 251 251 187 251 251 187 37 39 37 0 0 0 0 0 0
-0 0 0 21 22 20 2 2 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-4 5 5 12 12 12 21 22 21 25 27 26 30 32 31 38 39 37
-46 47 45 55 56 53 60 60 56 65 66 61 68 70 65 105 104 92
-110 109 94 197 193 154 210 208 158 197 193 154 184 179 149 84 83 72
-2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 13 13 184 179 149 251 251 187
-197 193 154 43 44 41 0 0 0 0 0 0 0 0 0 0 0 0
-145 141 105 251 251 187 251 251 187 251 251 187 214 212 158 43 45 43
-2 2 2 84 83 72 72 73 67 58 59 55 41 42 42 38 39 37
-72 73 67 58 59 55 41 42 42 31 33 31 25 27 26 18 22 22
-14 17 17 12 15 15 12 14 14 10 12 12 9 12 12 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 12 12 31 33 31 43 45 43 49 51 48 55 56 53
-110 109 94 251 251 187 251 251 187 251 251 187 251 251 187 168 163 120
-47 48 46 41 42 42 33 36 34 63 64 60 197 193 154 251 251 187
-251 251 187 184 179 149 13 13 13 12 12 12 12 12 12 16 16 16
-197 193 154 251 251 187 239 239 170 20 20 20 0 0 0 2 2 1
-108 107 93 110 109 94 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 4 5 5 11 11 11 18 19 18
-22 24 23 26 28 27 32 34 33 39 40 39 46 47 45 51 52 50
-55 57 54 60 60 56 63 64 60 63 64 60 63 64 60 58 59 55
-63 64 60 99 98 80 145 141 105 137 133 100 43 45 43 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 3 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 110 109 94 251 251 187
-251 251 187 184 179 149 25 27 26 0 0 0 0 0 0 0 0 0
-99 98 80 251 251 187 251 251 187 251 251 187 251 251 187 156 151 111
-25 27 26 84 83 72 65 66 61 47 48 46 32 34 33 39 40 39
-72 73 67 55 57 54 40 41 39 30 32 31 23 25 24 18 22 22
-14 17 17 12 15 15 11 13 13 10 12 12 9 11 11 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-9 11 11 28 31 30 41 42 42 47 48 46 55 56 53 58 59 55
-137 133 100 251 251 187 251 251 187 251 251 187 210 208 158 137 133 100
-47 48 46 40 41 39 32 34 33 75 75 61 184 179 149 239 239 170
-251 251 187 177 172 135 13 13 13 12 12 12 12 12 12 43 44 41
-197 193 154 251 251 187 210 208 158 10 10 9 0 0 0 84 83 72
-251 251 187 84 83 72 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-6 7 7 11 11 11 17 17 17 20 20 20 23 24 24 27 29 28
-32 34 33 38 39 37 43 45 43 47 48 46 51 52 50 55 56 53
-58 59 55 58 59 55 55 57 54 55 56 53 47 48 46 41 42 42
-35 37 36 31 33 31 47 48 46 14 14 13 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 66 65 55 99 98 80 20 20 20
-0 0 0 0 0 0 0 0 0 0 0 0 43 45 43 214 212 158
-251 251 187 251 251 187 145 141 105 3 3 3 0 0 0 0 0 0
-48 49 45 184 179 149 239 239 170 251 251 187 239 239 170 177 172 135
-84 83 72 72 73 67 55 56 53 39 40 39 26 28 27 39 40 39
-68 70 65 51 52 50 39 40 39 28 31 30 22 24 23 17 20 20
-14 17 17 12 14 14 10 13 13 9 11 11 9 11 11 9 11 11
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-27 29 28 40 41 39 46 47 45 51 52 50 55 57 54 63 64 60
-131 127 93 197 193 154 210 208 158 197 193 154 168 163 120 96 95 69
-47 48 46 40 41 39 32 34 33 71 71 57 145 141 105 184 179 149
-184 179 149 131 127 93 13 13 13 12 12 12 12 12 12 48 49 45
-168 163 120 184 179 149 156 151 111 6 7 7 14 14 13 177 172 135
-239 239 170 40 41 39 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 3 3 3 6 7 7 11 11 11 16 16 16
-18 19 18 21 22 21 23 24 24 27 29 28 32 34 33 37 39 37
-41 42 42 43 45 43 47 48 46 51 52 50 51 52 50 51 52 50
-51 52 50 49 51 48 46 47 45 40 41 39 32 34 33 25 27 26
-20 20 20 14 14 13 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 33 36 34 197 193 154 184 179 149
-41 42 42 0 0 0 0 0 0 0 0 0 3 3 3 184 179 149
-251 251 187 251 251 187 184 179 149 48 49 45 0 0 0 0 0 0
-16 17 12 121 119 87 177 172 135 194 189 146 188 184 146 145 141 105
-82 81 62 63 64 60 46 47 45 31 33 31 21 22 21 35 37 36
-68 70 65 51 52 50 37 39 37 27 30 29 22 24 23 17 20 20
-13 16 16 12 14 14 10 13 13 9 11 11 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 25 27 26
-38 39 37 43 45 43 51 52 50 55 56 53 60 60 56 63 64 60
-92 91 72 158 153 112 176 171 126 171 165 117 149 143 98 82 81 62
-44 46 43 38 39 37 30 32 31 71 71 57 131 127 93 160 154 106
-149 143 98 82 81 62 13 13 13 12 12 12 12 12 12 46 47 43
-121 119 87 134 131 96 96 95 69 7 7 6 38 39 37 131 127 93
-145 141 105 12 13 12 0 0 0 1 1 1 3 3 3 6 7 7
-10 10 9 12 12 12 14 14 13 16 16 16 18 19 18 21 22 21
-22 24 23 26 28 27 30 31 28 33 36 34 37 39 37 40 41 39
-41 42 42 43 45 43 46 47 45 46 47 45 46 47 45 43 45 43
-41 42 42 37 39 37 31 33 31 26 28 27 21 22 21 16 16 16
-6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 177 172 135 251 251 187
-197 193 154 27 29 28 0 0 0 0 0 0 0 0 0 110 109 94
-239 239 170 239 239 170 184 179 149 87 86 72 2 2 1 0 0 0
-1 1 1 82 81 62 142 137 94 165 161 109 165 161 109 131 127 93
-75 75 61 55 56 53 37 39 37 25 27 26 19 20 19 32 34 33
-65 66 61 49 51 48 35 37 36 27 29 28 20 23 23 16 19 19
-13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 22 24 23 35 37 36
-41 42 42 47 48 46 55 56 53 58 59 55 63 64 60 65 66 61
-71 71 57 131 127 93 160 154 106 160 154 106 142 137 94 82 81 62
-46 47 43 40 41 39 33 36 34 66 65 55 125 122 87 149 143 98
-142 137 94 82 81 62 17 17 17 18 19 17 14 14 13 46 47 43
-118 116 76 125 122 87 96 95 69 16 17 12 71 71 57 103 101 77
-82 81 62 11 11 11 11 11 11 13 13 13 14 14 13 14 14 13
-15 15 15 16 16 16 17 17 17 19 20 19 21 22 21 23 24 24
-26 28 27 27 29 28 31 33 31 33 36 34 35 37 36 38 39 37
-39 40 39 39 40 39 38 39 37 37 39 37 35 37 36 31 33 31
-27 29 28 24 26 24 21 22 21 17 17 17 12 12 12 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 68 70 65 251 251 187
-251 251 187 156 151 111 2 2 1 0 0 0 0 0 0 43 44 41
-177 172 135 184 179 149 158 153 112 103 101 77 19 20 18 0 0 0
-0 0 0 46 47 43 131 127 93 160 154 106 160 154 106 131 127 93
-71 71 57 43 45 43 30 32 31 21 22 21 16 16 16 26 28 27
-63 64 60 47 48 46 35 37 36 26 28 27 20 23 23 16 19 19
-13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-7 9 9 7 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 20 20 20 33 36 34 40 41 39
-46 47 45 51 52 50 55 57 54 60 60 56 63 64 60 65 66 61
-66 65 55 118 116 76 151 147 98 165 161 109 151 147 98 121 119 87
-96 95 69 96 95 69 96 95 69 103 101 77 142 137 94 151 147 98
-142 137 94 103 101 77 82 81 62 82 81 62 82 81 62 96 95 69
-131 127 93 142 137 94 103 101 77 46 47 43 96 95 69 118 116 76
-71 71 57 14 14 13 14 14 13 15 15 15 15 15 15 16 16 16
-16 16 16 17 17 17 18 19 18 20 20 20 21 22 21 23 24 24
-25 27 26 27 29 28 30 31 28 30 32 31 31 33 31 31 33 31
-31 33 31 31 33 31 30 31 28 27 29 28 25 27 26 22 24 23
-20 20 20 16 16 16 13 13 13 6 7 7 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-58 59 55 68 70 65 8 8 7 0 0 0 10 10 9 210 208 158
-251 251 187 184 179 149 38 39 37 0 0 0 0 0 0 8 8 7
-103 101 77 149 143 98 149 143 98 118 116 76 40 41 39 25 27 25
-53 55 47 82 81 62 144 139 99 165 161 109 165 161 109 142 137 94
-71 71 57 35 37 36 24 26 24 18 19 18 15 15 15 22 24 23
-63 64 60 46 47 45 33 36 34 26 28 27 20 23 22 17 18 17
-12 15 15 11 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 16 16 16 30 31 28 35 37 36 41 42 42
-47 48 46 55 56 53 58 59 55 63 64 60 65 66 61 65 66 61
-61 61 53 103 101 77 151 147 98 171 165 117 171 165 117 168 163 120
-158 153 112 158 153 112 155 149 109 151 147 98 151 147 98 160 154 106
-151 147 98 149 143 98 142 137 94 149 143 98 149 143 98 149 143 98
-155 149 109 151 147 98 131 127 93 103 101 77 125 122 87 118 116 76
-71 71 57 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17
-17 17 17 17 17 17 18 19 18 19 20 19 20 20 20 21 22 21
-23 24 24 24 26 24 25 27 26 26 28 27 26 28 27 26 28 27
-25 27 26 24 26 24 22 24 23 21 22 21 19 20 19 16 16 16
-14 14 13 8 8 7 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-20 20 20 184 179 149 168 163 120 21 22 21 0 0 0 105 104 92
-177 172 135 145 141 105 71 71 57 0 0 0 0 0 0 0 0 0
-66 65 55 131 127 93 151 147 98 142 137 94 118 116 76 121 119 87
-145 141 105 158 153 112 176 171 126 178 174 128 176 171 126 149 145 103
-96 95 69 31 33 31 21 22 21 16 16 16 14 14 13 18 19 18
-60 60 56 46 47 45 33 36 34 25 27 26 21 22 21 15 18 18
-12 15 15 11 13 13 9 11 11 8 10 10 8 10 10 8 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 9 9
-8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 10 12 12 26 28 27 31 33 31 38 39 37 43 45 43
-51 52 50 55 56 53 60 60 56 63 64 60 65 66 61 68 70 65
-63 64 60 96 95 69 158 153 112 178 174 128 188 184 146 194 189 146
-194 189 146 188 184 146 184 181 136 176 171 126 171 165 117 173 167 111
-173 167 111 165 161 109 171 165 117 174 170 121 176 171 126 178 174 128
-178 174 128 174 170 121 160 154 106 149 143 98 149 143 98 125 122 87
-71 71 57 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17
-17 17 17 17 17 17 17 17 17 18 19 18 19 20 19 20 20 20
-21 22 21 21 22 21 21 22 21 22 24 23 21 22 21 21 22 21
-21 22 21 19 20 19 18 19 18 16 16 16 14 14 13 11 11 11
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 105 104 92 197 193 154 110 109 94 9 9 8 36 38 35
-121 119 87 131 127 93 96 95 69 18 19 17 30 31 28 66 65 55
-96 95 69 142 137 94 160 154 106 160 154 106 160 154 106 168 163 120
-184 181 136 194 191 148 197 193 154 197 193 154 194 189 146 168 163 120
-125 122 87 46 47 43 18 19 18 15 15 15 13 13 13 14 14 13
-55 57 54 43 45 43 32 34 33 25 27 26 18 22 22 17 17 17
-12 14 14 10 12 12 9 11 11 8 10 10 8 9 9 7 9 9
-6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 32 34 33 41 42 42 35 37 36 39 40 39 37 39 37
-35 37 36 55 57 54 60 60 56 63 64 60 65 66 61 65 66 61
-61 63 57 115 113 82 168 163 120 194 191 148 204 201 155 210 208 158
-210 208 158 210 208 158 197 193 154 194 189 146 186 182 128 176 171 126
-174 170 121 176 171 126 186 182 128 190 186 136 194 191 148 197 193 154
-197 193 154 188 184 146 181 176 137 174 170 121 165 161 109 142 137 94
-82 81 62 24 26 24 16 16 16 16 16 16 16 16 16 16 16 16
-17 17 17 17 17 17 17 17 17 17 17 17 18 19 18 19 20 19
-19 20 19 19 20 19 20 20 20 19 20 19 19 20 19 18 19 18
-17 17 17 15 15 15 13 13 13 12 12 12 6 7 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 17 18 17 137 133 100 115 113 82 53 55 47 19 20 18
-103 101 77 144 139 99 137 133 100 115 113 82 137 133 100 156 151 111
-158 153 112 164 159 111 171 165 117 174 170 121 178 174 128 194 189 146
-204 201 155 214 212 158 214 212 158 214 212 158 210 208 158 188 184 146
-158 153 112 87 86 72 17 17 17 13 13 13 13 13 13 15 15 15
-55 56 53 43 45 43 32 34 33 24 26 24 17 20 20 16 16 16
-12 14 14 10 12 12 8 10 10 8 10 10 7 9 9 6 8 8
-6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 110 109 94 84 83 72 49 51 48 26 28 27 8 10 10
-8 9 9 51 52 50 58 59 55 63 64 60 63 64 60 63 64 60
-66 65 55 134 131 96 181 176 137 210 208 158 214 212 158 239 239 170
-239 239 170 224 223 159 210 208 158 204 201 155 194 189 146 186 182 128
-186 182 128 184 181 136 194 189 146 204 201 155 210 208 158 210 208 158
-210 208 158 210 208 158 197 193 154 190 186 136 176 171 126 155 149 109
-118 116 76 36 38 35 15 15 15 16 16 16 16 16 16 16 16 16
-16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 17 17 17
-17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 15 15 15
-13 13 13 12 12 12 8 8 7 2 2 2 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 53 55 47 103 101 77 96 95 69 53 55 47
-103 101 77 158 153 112 177 172 135 184 179 149 188 184 146 197 193 154
-194 189 146 190 186 136 184 181 136 184 181 136 194 189 146 210 208 158
-214 212 158 239 239 170 251 251 187 251 251 187 224 223 159 204 201 155
-177 172 135 121 119 87 30 31 28 13 13 13 12 12 12 39 40 39
-60 60 56 43 45 43 32 34 33 23 25 24 18 19 18 13 16 16
-13 13 13 9 11 11 8 10 10 8 9 9 6 8 8 6 8 8
-6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-14 17 17 197 193 154 158 153 112 55 57 54 7 9 9 7 9 9
-8 10 10 51 52 50 58 59 55 60 60 56 63 64 60 63 64 60
-71 71 57 155 149 109 194 191 148 214 212 158 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 190 186 136
-190 186 136 194 189 146 204 201 155 210 208 158 224 223 159 239 239 170
-239 239 170 224 223 159 210 208 158 204 201 155 190 186 136 164 159 111
-125 122 87 40 41 39 15 15 15 15 15 15 15 15 15 15 15 15
-16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
-16 16 16 16 16 16 15 15 15 14 14 13 13 13 13 12 12 12
-8 9 9 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 21 22 20 96 95 69 125 122 87 121 119 87
-144 139 99 177 172 135 197 193 154 210 208 158 214 212 158 214 212 158
-210 208 158 204 201 155 194 191 148 194 189 146 204 201 155 214 212 158
-239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-188 184 146 145 141 105 53 55 47 12 12 12 15 15 15 63 64 60
-63 64 60 41 42 42 31 33 31 23 24 24 17 18 17 12 15 15
-11 13 13 9 11 11 8 9 9 7 9 9 6 8 8 6 8 8
-6 7 7 6 7 7 6 8 8 6 8 8 6 8 8 6 8 8
-6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 8 7
-43 45 43 251 251 187 156 151 111 8 10 10 7 9 9 7 9 9
-21 22 21 51 52 50 55 56 53 55 57 54 58 59 55 58 59 55
-75 75 61 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 214 212 158 204 201 155 194 189 146
-190 186 136 197 193 154 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 176 171 126
-125 122 87 36 38 35 14 14 13 14 14 13 15 15 15 15 15 15
-15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
-15 15 15 14 14 13 13 13 13 12 12 12 10 10 9 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 7 7 5 71 71 57 131 127 93 158 153 112
-177 172 135 197 193 154 214 212 158 239 239 170 251 251 187 251 251 187
-238 237 168 210 208 158 204 201 155 197 193 154 204 201 155 214 212 158
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-197 193 154 156 151 111 66 65 55 12 12 12 37 39 37 58 59 55
-58 59 55 41 42 42 31 33 31 22 24 23 17 17 17 12 14 14
-10 12 12 8 10 10 6 8 8 6 8 8 6 7 7 6 7 7
-6 7 7 5 7 7 6 7 7 6 7 7 6 8 8 6 8 8
-6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
-7 9 9 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
-61 63 57 197 193 154 16 19 19 6 8 8 6 8 8 8 9 9
-41 42 42 47 48 46 51 52 50 51 52 50 55 56 53 55 56 53
-71 71 57 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 214 212 158 204 201 155 194 189 146
-190 186 136 197 193 154 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 224 223 159 204 201 155 177 172 135
-121 119 87 30 31 28 13 13 13 14 14 13 14 14 13 14 14 13
-14 14 13 14 14 13 15 15 15 15 15 15 14 14 13 13 13 13
-12 12 12 12 12 12 10 10 9 4 5 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 48 49 45 131 127 93 174 170 121
-194 189 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 204 201 155 197 193 154 204 201 155 210 208 158
-239 239 170 251 251 187 251 251 187 251 251 187 239 239 170 214 212 158
-194 191 148 156 151 111 71 71 57 19 20 19 51 52 50 51 52 50
-51 52 50 41 42 42 30 32 31 21 22 21 17 17 17 13 13 13
-9 11 11 8 9 9 6 8 8 6 7 7 6 7 7 5 7 7
-5 6 5 5 6 5 5 7 7 5 7 7 6 7 7 6 7 7
-6 8 8 6 8 8 6 8 8 6 7 7 6 7 7 6 7 7
-6 7 7 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
-55 56 53 43 45 43 6 8 8 6 8 8 6 8 8 47 48 46
-60 60 56 47 48 46 46 47 45 47 48 46 38 39 37 10 12 12
-66 65 55 145 141 105 197 193 154 214 212 158 251 251 187 251 251 187
-251 251 187 251 251 187 224 223 159 210 208 158 194 191 148 184 181 136
-184 181 136 194 189 146 204 201 155 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 181 176 137
-115 113 82 21 22 20 13 13 13 13 13 13 13 13 13 13 13 13
-14 14 13 13 13 13 13 13 13 13 13 13 12 12 12 11 11 11
-10 10 9 6 7 7 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 2 2 1 66 65 55 144 139 99 178 174 128
-204 201 155 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 204 201 155 194 191 148 197 193 154 204 201 155
-214 212 158 239 239 170 239 239 170 239 239 170 214 212 158 210 208 158
-184 181 136 149 145 103 66 65 55 41 42 42 47 48 46 46 47 45
-43 45 43 39 40 39 28 31 30 21 22 21 16 16 16 10 12 12
-8 10 10 6 8 8 6 7 7 6 7 7 5 6 5 5 6 5
-5 6 5 5 6 5 5 6 5 5 6 5 5 7 7 5 7 7
-6 7 7 6 7 7 6 7 7 5 7 7 5 7 7 5 7 7
-5 7 7 6 7 7 6 7 7 6 7 7 6 7 7 6 8 8
-6 8 8 6 8 8 6 7 7 6 7 7 46 47 45 156 151 111
-105 104 92 58 59 55 43 45 43 32 34 33 6 8 8 6 8 8
-49 51 48 125 122 87 181 176 137 204 201 155 214 212 158 239 239 170
-239 239 170 214 212 158 210 208 158 197 193 154 181 176 137 176 171 126
-176 171 126 184 181 136 197 193 154 210 208 158 239 239 170 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
-99 98 80 13 13 13 12 12 12 12 12 12 13 13 13 12 12 12
-12 12 12 12 12 12 11 11 11 11 11 11 8 9 9 4 5 5
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 1 1 0 61 61 53 142 137 94 181 176 137
-204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 197 193 154 190 186 136 184 181 136 188 184 146
-197 193 154 204 201 155 210 208 158 210 208 158 204 201 155 194 189 146
-176 171 126 134 131 96 66 65 55 43 45 43 41 42 42 39 40 39
-35 37 36 33 36 34 27 29 28 20 20 20 15 15 15 9 11 11
-8 9 9 6 7 7 5 6 5 5 6 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 5 6 5 4 5 5
-4 5 5 5 6 5 4 5 5 5 6 5 5 6 5 5 6 5
-5 7 7 5 7 7 5 7 7 5 7 7 5 7 7 5 7 7
-6 7 7 6 7 7 6 7 7 28 31 30 184 179 149 184 179 149
-145 141 105 84 83 72 27 29 28 5 7 7 5 6 5 16 16 16
-43 44 41 96 95 69 158 153 112 188 184 146 204 201 155 210 208 158
-204 201 155 197 193 154 184 179 149 177 172 135 168 163 120 164 159 111
-164 159 111 174 170 121 184 181 136 197 193 154 214 212 158 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
-71 71 57 11 11 11 12 12 12 11 11 11 11 11 11 11 11 11
-10 10 9 10 10 9 8 8 7 3 4 4 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 31 33 31 121 119 87 176 171 126
-197 193 154 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
-239 239 170 210 208 158 194 189 146 178 174 128 174 170 121 176 171 126
-177 172 135 181 176 137 184 179 149 184 179 149 181 176 137 178 174 128
-158 153 112 121 119 87 53 55 47 37 39 37 33 36 34 30 32 31
-27 29 28 25 27 26 24 26 24 19 20 19 13 13 13 8 10 10
-6 8 8 6 7 7 5 6 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 3 4 4 3 4 4 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-5 6 5 5 6 5 5 6 5 5 6 5 5 6 5 5 6 5
-5 6 5 5 6 5 12 14 14 145 141 105 184 179 149 177 172 135
-90 89 73 21 22 21 5 6 5 5 6 5 4 5 5 37 39 37
-38 39 37 61 61 53 134 131 96 168 163 120 184 181 136 188 184 146
-184 179 149 177 172 135 168 163 120 164 159 111 155 149 109 151 147 98
-151 147 98 164 159 111 176 171 126 184 179 149 210 208 158 239 239 170
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 158 153 112
-46 47 43 10 10 9 10 10 9 10 10 9 8 9 9 8 9 9
-6 7 7 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 13 12 7 82 81 62 158 153 112
-188 184 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
-224 223 159 204 201 155 184 181 136 171 165 117 164 159 111 160 154 106
-158 153 112 164 159 111 168 163 120 168 163 120 168 163 120 164 159 111
-142 137 94 96 95 69 43 44 41 27 29 28 26 28 27 23 24 24
-21 22 21 18 19 18 17 17 17 18 19 18 13 13 13 8 8 7
-6 7 7 5 6 5 4 5 5 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 3 3 3 3 3 3 4 4 3 4 4
-3 4 4 3 4 4 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 31 33 31 65 66 61
-37 39 37 38 39 37 96 95 69 144 139 99 168 163 120 174 170 121
-168 163 120 164 159 111 155 149 109 149 145 103 149 143 98 142 137 94
-149 143 98 151 147 98 164 159 111 177 172 135 197 193 154 210 208 158
-251 251 187 251 251 187 251 251 187 239 239 170 197 193 154 137 133 100
-24 26 24 8 9 9 8 9 9 8 8 7 6 7 7 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 46 47 43 125 122 87
-176 171 126 197 193 154 210 208 158 239 239 170 251 251 187 239 239 170
-214 212 158 197 193 154 181 176 137 164 159 111 151 147 98 149 143 98
-149 143 98 149 143 98 149 145 103 155 149 109 160 154 106 149 143 98
-118 116 76 82 81 62 30 31 28 21 22 21 19 20 19 17 17 17
-14 14 13 12 12 12 10 10 9 12 12 12 10 12 12 6 8 8
-4 5 5 3 4 4 3 4 4 3 4 4 3 3 3 3 3 3
-3 3 3 3 3 3 3 3 3 3 3 3 2 3 3 2 3 3
-3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 4 5 5
-4 5 5 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 3 4 4 3 4 4 23 24 24 110 109 94 72 73 67
-39 40 39 22 24 23 46 47 43 103 101 77 142 137 94 155 149 109
-160 154 106 155 149 109 149 143 98 142 137 94 142 137 94 142 137 94
-142 137 94 149 143 98 155 149 109 176 171 126 184 179 149 210 208 158
-239 239 170 251 251 187 251 251 187 214 212 158 184 179 149 105 104 92
-10 10 9 6 7 7 3 4 4 1 1 1 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 12 12 9 82 81 62
-149 145 103 181 176 137 197 193 154 210 208 158 214 212 158 214 212 158
-210 208 158 197 193 154 177 172 135 158 153 112 149 143 98 142 137 94
-142 137 94 142 137 94 149 143 98 151 147 98 151 147 98 131 127 93
-103 101 77 71 71 57 22 24 23 15 15 15 13 13 13 11 11 11
-8 9 9 6 7 7 6 7 7 4 5 5 8 9 9 6 7 7
-4 5 5 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3
-2 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 21 22 21 145 141 105 145 141 105 72 73 67
-17 18 17 3 4 4 21 22 20 66 65 55 118 116 76 142 137 94
-149 143 98 151 147 98 149 143 98 142 137 94 142 137 94 142 137 94
-142 137 94 149 143 98 155 149 109 168 163 120 184 179 149 210 208 158
-239 239 170 251 251 187 251 251 187 210 208 158 177 172 135 71 71 57
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
-115 113 82 158 153 112 181 176 137 197 193 154 204 201 155 210 208 158
-204 201 155 188 184 146 177 172 135 164 159 111 149 145 103 142 137 94
-142 137 94 142 137 94 149 143 98 151 147 98 149 143 98 125 122 87
-96 95 69 61 61 53 16 17 12 8 9 9 8 8 7 6 7 7
-4 5 5 3 4 4 3 3 3 3 3 3 3 3 3 5 6 5
-3 4 4 2 3 3 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2
-2 2 2 2 2 2 2 3 3 2 3 3 2 3 3 2 3 3
-3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
-3 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 4 4 8 9 9 8 8 7 3 3 3
-3 3 3 3 3 3 9 9 8 36 38 35 82 81 62 118 116 76
-142 137 94 151 147 98 151 147 98 151 147 98 149 143 98 149 143 98
-149 143 98 151 147 98 160 154 106 176 171 126 188 184 146 210 208 158
-239 239 170 251 251 187 239 239 170 210 208 158 156 151 111 31 33 31
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
-66 65 55 125 122 87 158 153 112 181 176 137 194 189 146 197 193 154
-197 193 154 184 179 149 177 172 135 168 163 120 156 151 111 151 147 98
-151 147 98 151 147 98 151 147 98 161 156 96 149 143 98 118 116 76
-82 81 62 53 55 47 12 12 9 4 5 5 3 4 4 3 3 3
-3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 2 2
-3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2 3 3
-2 3 3 2 3 3 2 3 3 2 3 3 2 2 2 2 2 2
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 3 3 3
-3 3 3 3 3 3 72 73 67 61 61 53 53 55 47 96 95 69
-131 127 93 151 147 98 161 156 96 161 156 96 151 147 98 151 147 98
-161 156 96 160 154 106 164 159 111 177 172 135 197 193 154 210 208 158
-239 239 170 251 251 187 224 223 159 197 193 154 131 127 93 9 9 8
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-24 26 24 82 81 62 131 127 93 164 159 111 178 174 128 188 184 146
-188 184 146 188 184 146 181 176 137 176 171 126 168 163 120 164 159 111
-160 154 106 160 154 106 160 154 106 160 154 106 151 147 98 125 122 87
-82 81 62 61 61 53 12 12 9 3 3 3 3 3 3 2 2 2
-2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
-0 0 0 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 1 2 2
-1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
-2 3 3 30 32 31 72 73 67 31 33 31 36 38 35 82 81 62
-118 116 76 149 143 98 161 156 96 161 156 96 161 156 96 160 154 106
-165 161 109 165 161 109 176 171 126 188 184 146 204 201 155 214 212 158
-239 239 170 239 239 170 214 212 158 184 179 149 82 81 62 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-2 2 2 43 44 41 96 95 69 131 127 93 160 154 106 176 171 126
-184 181 136 184 181 136 184 181 136 181 176 137 178 174 128 174 170 121
-171 165 117 173 167 111 173 167 111 173 167 111 160 154 106 131 127 93
-96 95 69 66 65 55 16 17 12 2 2 2 1 1 1 1 1 1
-1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 10 9 6 30 31 28 71 71 57
-118 116 76 149 143 98 165 161 109 165 161 109 165 161 109 173 167 111
-173 167 111 176 171 126 184 181 136 197 193 154 210 208 158 224 223 159
-251 251 187 239 239 170 210 208 158 168 163 120 40 41 39 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 13 12 7 61 61 53 96 95 69 131 127 93 160 154 106
-176 171 126 184 181 136 184 181 136 188 184 146 184 181 136 184 181 136
-184 181 136 186 182 128 186 182 128 178 174 128 174 170 121 149 145 103
-118 116 76 82 81 62 21 22 20 1 1 1 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 3 3 3 30 31 28 66 65 55
-118 116 76 149 143 98 165 161 109 173 167 111 173 167 111 174 170 121
-186 182 128 190 186 136 197 193 154 210 208 158 224 223 159 251 251 187
-251 251 187 239 239 170 197 193 154 137 133 100 12 12 9 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 30 31 28 71 71 57 103 101 77 134 131 96
-164 159 111 176 171 126 184 181 136 188 184 146 194 189 146 197 193 154
-197 193 154 197 193 154 194 191 148 194 189 146 190 186 136 176 171 126
-145 141 105 103 101 77 40 41 39 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 30 31 28 71 71 57
-118 116 76 160 154 106 173 167 111 178 174 128 186 182 128 190 186 136
-194 191 148 204 201 155 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 214 212 158 184 179 149 84 83 72 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 5 5 3 43 44 41 82 81 62 103 101 77
-142 137 94 165 161 109 178 174 128 190 186 136 197 193 154 204 201 155
-210 208 158 210 208 158 210 208 158 210 208 158 210 208 158 197 193 154
-177 172 135 145 141 105 79 78 62 5 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 2 2 1 2 2 30 31 28 82 81 62
-142 137 94 165 161 109 178 174 128 190 186 136 194 191 148 204 201 155
-210 208 158 214 212 158 239 239 170 251 251 187 251 251 187 251 251 187
-251 251 187 210 208 158 168 163 120 36 38 35 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 53 55 47 82 81 62
-118 116 76 151 147 98 171 165 117 184 181 136 194 191 148 210 208 158
-214 212 158 224 223 159 239 239 170 239 239 170 224 223 159 214 212 158
-197 193 154 176 171 126 115 113 82 24 26 24 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 40 41 39 103 101 77
-151 147 98 176 171 126 190 186 136 197 193 154 210 208 158 214 212 158
-239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-239 239 170 197 193 154 110 109 94 3 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 30 31 28 66 65 55
-96 95 69 125 122 87 160 154 106 178 174 128 194 189 146 204 201 155
-214 212 158 239 239 170 251 251 187 251 251 187 251 251 187 239 239 170
-210 208 158 188 184 146 149 145 103 61 61 53 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 61 61 53 131 127 93
-164 159 111 184 181 136 197 193 154 210 208 158 224 223 159 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-210 208 158 168 163 120 43 44 41 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 4 3 2 36 38 35
-71 71 57 96 95 69 142 137 94 165 161 109 184 181 136 197 193 154
-210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 251 251 187
-214 212 158 197 193 154 168 163 120 103 101 77 7 7 5 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 0 0 0 0 0 0 0 0 0 82 81 62 142 137 94
-174 170 121 194 189 146 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 224 223 159
-184 179 149 99 98 80 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
-43 44 41 82 81 62 118 116 76 142 137 94 171 165 117 190 186 136
-204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
-214 212 158 197 193 154 174 170 121 125 122 87 30 31 28 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 3 4 3 82 81 62 149 143 98
-176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 239 239 170 204 201 155
-145 141 105 30 31 28 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-10 9 6 46 47 43 82 81 62 118 116 76 149 143 98 174 170 121
-194 189 146 210 208 158 224 223 159 251 251 187 251 251 187 224 223 159
-210 208 158 194 191 148 174 170 121 134 131 96 53 55 47 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
-176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 177 172 135
-75 75 61 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 10 9 6 46 47 43 82 81 62 118 116 76 149 143 98
-176 171 126 194 191 148 210 208 158 214 212 158 214 212 158 210 208 158
-197 193 154 184 181 136 164 159 111 131 127 93 53 55 47 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
-174 170 121 194 189 146 204 201 155 214 212 158 239 239 170 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 184 179 149 110 109 94
-12 12 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 10 9 6 43 44 41 82 81 62 115 113 82
-144 139 99 168 163 120 188 184 146 197 193 154 197 193 154 194 189 146
-184 181 136 174 170 121 151 147 98 118 116 76 36 38 35 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 4 3 2 82 81 62 142 137 94
-171 165 117 186 182 128 194 191 148 210 208 158 214 212 158 224 223 159
-239 239 170 224 223 159 210 208 158 184 179 149 137 133 100 36 38 35
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 36 38 35 71 71 57
-103 101 77 131 127 93 155 149 109 168 163 120 168 163 120 168 163 120
-164 159 111 149 143 98 125 122 87 82 81 62 13 12 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 61 61 53 125 122 87
-160 154 106 174 170 121 184 181 136 194 189 146 204 201 155 210 208 158
-210 208 158 204 201 155 184 179 149 145 141 105 61 61 53 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 3 3 2 30 31 28
-61 61 53 82 81 62 103 101 77 121 119 87 125 122 87 125 122 87
-118 116 76 103 101 77 79 78 62 24 26 24 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 25 27 25 96 95 69
-142 137 94 160 154 106 171 165 117 178 174 128 184 181 136 184 181 136
-181 176 137 177 172 135 145 141 105 75 75 61 5 5 3 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 17 12 40 41 39 61 61 53 71 71 57 71 71 57 71 71 57
-66 65 55 43 44 41 12 12 9 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 46 47 43
-96 95 69 125 122 87 142 137 94 149 145 103 155 149 109 155 149 109
-145 141 105 121 119 87 66 65 55 7 7 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 16 17 12 24 26 24 25 27 25 19 20 18
-7 7 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 1
-25 27 25 61 61 53 82 81 62 96 95 69 96 95 69 82 81 62
-61 61 53 25 27 25 2 2 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 5 6 5 13 12 7 10 9 6 3 4 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 6 6 6 10 10 10 10 10 10
+ 10 10 10 6 6 6 6 6 6 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 10 10 10 14 14 14
+ 22 22 22 26 26 26 30 30 30 34 34 34
+ 30 30 30 30 30 30 26 26 26 18 18 18
+ 14 14 14 10 10 10 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 26 26 26 42 42 42
+ 54 54 54 66 66 66 78 78 78 78 78 78
+ 78 78 78 74 74 74 66 66 66 54 54 54
+ 42 42 42 26 26 26 18 18 18 10 10 10
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 22 22 22 42 42 42 66 66 66 86 86 86
+ 66 66 66 38 38 38 38 38 38 22 22 22
+ 26 26 26 34 34 34 54 54 54 66 66 66
+ 86 86 86 70 70 70 46 46 46 26 26 26
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 26 26 26
+ 50 50 50 82 82 82 58 58 58 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 54 54 54 86 86 86 66 66 66
+ 38 38 38 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 22 22 22 50 50 50
+ 78 78 78 34 34 34 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 6 6 6 70 70 70
+ 78 78 78 46 46 46 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 42 42 42 82 82 82
+ 26 26 26 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 14 14 14
+ 46 46 46 34 34 34 6 6 6 2 2 6
+ 42 42 42 78 78 78 42 42 42 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 30 30 30 66 66 66 58 58 58
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 26 26 26
+ 86 86 86 101 101 101 46 46 46 10 10 10
+ 2 2 6 58 58 58 70 70 70 34 34 34
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 42 42 42 86 86 86 10 10 10
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 30 30 30
+ 94 94 94 94 94 94 58 58 58 26 26 26
+ 2 2 6 6 6 6 78 78 78 54 54 54
+ 22 22 22 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 62 62 62 62 62 62 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 26 26 26
+ 54 54 54 38 38 38 18 18 18 10 10 10
+ 2 2 6 2 2 6 34 34 34 82 82 82
+ 38 38 38 14 14 14 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 30 30 30 78 78 78 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 10 10 10 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 78 78 78
+ 50 50 50 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 14 14 14 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 54 54 54
+ 66 66 66 26 26 26 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 82 82 82 2 2 6 2 2 6
+ 2 2 6 6 6 6 10 10 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 14 14 14 10 10 10 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 18 18 18
+ 82 82 82 34 34 34 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 2 2 6
+ 6 6 6 6 6 6 22 22 22 34 34 34
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 34 34 34
+ 10 10 10 50 50 50 22 22 22 2 2 6
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 86 86 86 42 42 42 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 2 2 6
+ 38 38 38 116 116 116 94 94 94 22 22 22
+ 22 22 22 2 2 6 2 2 6 2 2 6
+ 14 14 14 86 86 86 138 138 138 162 162 162
+154 154 154 38 38 38 26 26 26 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 86 86 86 46 46 46 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 14 14 14
+134 134 134 198 198 198 195 195 195 116 116 116
+ 10 10 10 2 2 6 2 2 6 6 6 6
+101 98 89 187 187 187 210 210 210 218 218 218
+214 214 214 134 134 134 14 14 14 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 86 86 86 50 50 50 18 18 18 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 54 54 54
+218 218 218 195 195 195 226 226 226 246 246 246
+ 58 58 58 2 2 6 2 2 6 30 30 30
+210 210 210 253 253 253 174 174 174 123 123 123
+221 221 221 234 234 234 74 74 74 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 82 82 82 2 2 6 106 106 106
+170 170 170 26 26 26 86 86 86 226 226 226
+123 123 123 10 10 10 14 14 14 46 46 46
+231 231 231 190 190 190 6 6 6 70 70 70
+ 90 90 90 238 238 238 158 158 158 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 86 86 86 6 6 6 116 116 116
+106 106 106 6 6 6 70 70 70 149 149 149
+128 128 128 18 18 18 38 38 38 54 54 54
+221 221 221 106 106 106 2 2 6 14 14 14
+ 46 46 46 190 190 190 198 198 198 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 62 62 62 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 94 94 94 14 14 14 101 101 101
+128 128 128 2 2 6 18 18 18 116 116 116
+118 98 46 121 92 8 121 92 8 98 78 10
+162 162 162 106 106 106 2 2 6 2 2 6
+ 2 2 6 195 195 195 195 195 195 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 62 62 62 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 1
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 90 90 90 14 14 14 58 58 58
+210 210 210 26 26 26 54 38 6 154 114 10
+226 170 11 236 186 11 225 175 15 184 144 12
+215 174 15 175 146 61 37 26 9 2 2 6
+ 70 70 70 246 246 246 138 138 138 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 66 66 66 26 26 26 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 14 14 14 10 10 10
+195 195 195 188 164 115 192 133 9 225 175 15
+239 182 13 234 190 10 232 195 16 232 200 30
+245 207 45 241 208 19 232 195 16 184 144 12
+218 194 134 211 206 186 42 42 42 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 50 50 50 74 74 74 30 30 30 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 86 86 86 14 14 14 2 2 6
+121 87 25 192 133 9 219 162 10 239 182 13
+236 186 11 232 195 16 241 208 19 244 214 54
+246 218 60 246 218 38 246 215 20 241 208 19
+241 208 19 226 184 13 121 87 25 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 50 50 50 82 82 82 34 34 34 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 82 82 82 30 30 30 61 42 6
+180 123 7 206 145 10 230 174 11 239 182 13
+234 190 10 238 202 15 241 208 19 246 218 74
+246 218 38 246 215 20 246 215 20 246 215 20
+226 184 13 215 174 15 184 144 12 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 26 26 26 94 94 94 42 42 42 14 14 14
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 50 50 50 104 69 6
+192 133 9 216 158 10 236 178 12 236 186 11
+232 195 16 241 208 19 244 214 54 245 215 43
+246 215 20 246 215 20 241 208 19 198 155 10
+200 144 11 216 158 10 156 118 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 90 90 90 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 46 46 46 22 22 22
+137 92 6 210 162 10 239 182 13 238 190 10
+238 202 15 241 208 19 246 215 20 246 215 20
+241 208 19 203 166 17 185 133 11 210 150 10
+216 158 10 210 150 10 102 78 10 2 2 6
+ 6 6 6 54 54 54 14 14 14 2 2 6
+ 2 2 6 62 62 62 74 74 74 30 30 30
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 78 78 78 50 50 50 6 6 6
+ 94 70 30 139 102 15 190 146 13 226 184 13
+232 200 30 232 195 16 215 174 15 190 146 13
+168 122 10 192 133 9 210 150 10 213 154 11
+202 150 34 182 157 106 101 98 89 2 2 6
+ 2 2 6 78 78 78 116 116 116 58 58 58
+ 2 2 6 22 22 22 90 90 90 46 46 46
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 50 50 50 6 6 6
+128 128 128 174 154 114 156 107 11 168 122 10
+198 155 10 184 144 12 197 138 11 200 144 11
+206 145 10 206 145 10 197 138 11 188 164 115
+195 195 195 198 198 198 174 174 174 14 14 14
+ 2 2 6 22 22 22 116 116 116 116 116 116
+ 22 22 22 2 2 6 74 74 74 70 70 70
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 101 101 101 26 26 26 10 10 10
+138 138 138 190 190 190 174 154 114 156 107 11
+197 138 11 200 144 11 197 138 11 192 133 9
+180 123 7 190 142 34 190 178 144 187 187 187
+202 202 202 221 221 221 214 214 214 66 66 66
+ 2 2 6 2 2 6 50 50 50 62 62 62
+ 6 6 6 2 2 6 10 10 10 90 90 90
+ 50 50 50 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 34 34 34
+ 74 74 74 74 74 74 2 2 6 6 6 6
+144 144 144 198 198 198 190 190 190 178 166 146
+154 121 60 156 107 11 156 107 11 168 124 44
+174 154 114 187 187 187 190 190 190 210 210 210
+246 246 246 253 253 253 253 253 253 182 182 182
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 62 62 62
+ 74 74 74 34 34 34 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 10 10 10 22 22 22 54 54 54
+ 94 94 94 18 18 18 2 2 6 46 46 46
+234 234 234 221 221 221 190 190 190 190 190 190
+190 190 190 187 187 187 187 187 187 190 190 190
+190 190 190 195 195 195 214 214 214 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+ 82 82 82 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 14 14 14
+ 86 86 86 54 54 54 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 46 46 46 90 90 90
+ 46 46 46 18 18 18 6 6 6 182 182 182
+253 253 253 246 246 246 206 206 206 190 190 190
+190 190 190 190 190 190 190 190 190 190 190 190
+206 206 206 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+202 202 202 14 14 14 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 42 42 42 86 86 86 42 42 42 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 14 14 14 38 38 38 74 74 74 66 66 66
+ 2 2 6 6 6 6 90 90 90 250 250 250
+253 253 253 253 253 253 238 238 238 198 198 198
+190 190 190 190 190 190 195 195 195 221 221 221
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 82 82 82 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 78 78 78 70 70 70 34 34 34
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 34 34 34 66 66 66 78 78 78 6 6 6
+ 2 2 6 18 18 18 218 218 218 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+226 226 226 231 231 231 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 178 178 178 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 18 18 18 90 90 90 62 62 62
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 26 26 26
+ 58 58 58 90 90 90 18 18 18 2 2 6
+ 2 2 6 110 110 110 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 18 18 18 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 94 94 94
+ 54 54 54 26 26 26 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 22 22 22 50 50 50
+ 90 90 90 26 26 26 2 2 6 2 2 6
+ 14 14 14 195 195 195 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 242 242 242 54 54 54 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+ 86 86 86 50 50 50 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 38 38 38 82 82 82
+ 34 34 34 2 2 6 2 2 6 2 2 6
+ 42 42 42 195 195 195 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 242 242 242 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 246 246 246 238 238 238
+226 226 226 231 231 231 101 101 101 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 38 38 38 82 82 82 42 42 42 14 14 14
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 26 26 26 62 62 62 66 66 66
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 70 70 70 170 170 170 206 206 206 234 234 234
+246 246 246 250 250 250 250 250 250 238 238 238
+226 226 226 231 231 231 238 238 238 250 250 250
+250 250 250 250 250 250 246 246 246 231 231 231
+214 214 214 206 206 206 202 202 202 202 202 202
+198 198 198 202 202 202 182 182 182 18 18 18
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 62 62 62 66 66 66 30 30 30
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 42 42 42 82 82 82 18 18 18
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 94 94 94 182 182 182 218 218 218 242 242 242
+250 250 250 253 253 253 253 253 253 250 250 250
+234 234 234 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+238 238 238 226 226 226 210 210 210 202 202 202
+195 195 195 195 195 195 210 210 210 158 158 158
+ 6 6 6 14 14 14 50 50 50 14 14 14
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 86 86 86 46 46 46
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 54 54 54 70 70 70 2 2 6
+ 2 2 6 10 10 10 2 2 6 22 22 22
+166 166 166 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+231 231 231 206 206 206 198 198 198 226 226 226
+ 94 94 94 2 2 6 6 6 6 38 38 38
+ 30 30 30 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 62 62 62 66 66 66
+ 26 26 26 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 74 74 74 50 50 50 2 2 6
+ 26 26 26 26 26 26 2 2 6 106 106 106
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 218 218 218 202 202 202
+210 210 210 14 14 14 2 2 6 2 2 6
+ 30 30 30 22 22 22 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 86 86 86
+ 42 42 42 14 14 14 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 90 90 90 22 22 22 2 2 6
+ 42 42 42 2 2 6 18 18 18 218 218 218
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 221 221 221
+218 218 218 101 101 101 2 2 6 14 14 14
+ 18 18 18 38 38 38 10 10 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 78 78 78
+ 58 58 58 22 22 22 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 54 54 54 82 82 82 2 2 6 26 26 26
+ 22 22 22 2 2 6 123 123 123 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+238 238 238 198 198 198 6 6 6 38 38 38
+ 58 58 58 26 26 26 38 38 38 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 78 78 78 30 30 30 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 30 30 30
+ 74 74 74 58 58 58 2 2 6 42 42 42
+ 2 2 6 22 22 22 231 231 231 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 46 46 46 38 38 38
+ 42 42 42 14 14 14 38 38 38 14 14 14
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 86 86 86 46 46 46 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 42 42 42
+ 90 90 90 18 18 18 18 18 18 26 26 26
+ 2 2 6 116 116 116 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 94 94 94 6 6 6
+ 2 2 6 2 2 6 10 10 10 34 34 34
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 10 10 10 26 26 26 66 66 66
+ 82 82 82 2 2 6 38 38 38 6 6 6
+ 14 14 14 210 210 210 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 246 246 246 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 144 144 144 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 42 42 42 74 74 74 30 30 30 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 42 42 42 90 90 90
+ 26 26 26 6 6 6 42 42 42 2 2 6
+ 74 74 74 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 242 242 242 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 182 182 182 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 10 10 10 86 86 86 38 38 38 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 26 26 26 66 66 66 82 82 82
+ 2 2 6 22 22 22 18 18 18 2 2 6
+149 149 149 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206 2 2 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 86 86 86 46 46 46 14 14 14
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 18 18 18 46 46 46 86 86 86 18 18 18
+ 2 2 6 34 34 34 10 10 10 6 6 6
+210 210 210 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 221 221 221 6 6 6
+ 2 2 6 2 2 6 6 6 6 30 30 30
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 82 82 82 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 26 26 26 66 66 66 62 62 62 2 2 6
+ 2 2 6 38 38 38 10 10 10 26 26 26
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 6 6 6
+ 2 2 6 2 2 6 10 10 10 30 30 30
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 58 58 58 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 78 78 78 6 6 6 2 2 6
+ 2 2 6 46 46 46 14 14 14 42 42 42
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 10 10 10
+ 2 2 6 2 2 6 22 22 22 14 14 14
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 62 62 62 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 74 74 74 2 2 6 2 2 6
+ 14 14 14 70 70 70 34 34 34 62 62 62
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 14 14 14
+ 2 2 6 2 2 6 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 62 62 62 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 54 54 54 62 62 62 2 2 6 2 2 6
+ 2 2 6 30 30 30 46 46 46 70 70 70
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 226 226 226 10 10 10
+ 2 2 6 6 6 6 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 58 58 58 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 58 58 58 62 62 62 2 2 6 2 2 6
+ 2 2 6 2 2 6 30 30 30 78 78 78
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206 2 2 6
+ 22 22 22 34 34 34 18 14 6 22 22 22
+ 26 26 26 18 18 18 6 6 6 2 2 6
+ 2 2 6 82 82 82 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 26 26 26
+ 62 62 62 106 106 106 74 54 14 185 133 11
+210 162 10 121 92 8 6 6 6 62 62 62
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 158 158 158 18 18 18
+ 14 14 14 2 2 6 2 2 6 2 2 6
+ 6 6 6 18 18 18 66 66 66 38 38 38
+ 6 6 6 94 94 94 50 50 50 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 10 10 10 10 10 10 18 18 18 38 38 38
+ 78 78 78 142 134 106 216 158 10 242 186 14
+246 190 14 246 190 14 156 118 10 10 10 10
+ 90 90 90 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 230 190
+238 204 91 238 204 91 181 142 44 37 26 9
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 38 38 38 46 46 46
+ 26 26 26 106 106 106 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 22 22 22
+ 30 30 30 38 38 38 50 50 50 70 70 70
+106 106 106 190 142 34 226 170 11 242 186 14
+246 190 14 246 190 14 246 190 14 154 114 10
+ 6 6 6 74 74 74 226 226 226 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 228 184 62
+241 196 14 241 208 19 232 195 16 38 30 10
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 30 30 30 26 26 26
+203 166 17 154 142 90 66 66 66 26 26 26
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 38 38 38 58 58 58
+ 78 78 78 86 86 86 101 101 101 123 123 123
+175 146 61 210 150 10 234 174 13 246 186 14
+246 190 14 246 190 14 246 190 14 238 190 10
+102 78 10 2 2 6 46 46 46 198 198 198
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 224 178 62
+242 186 14 241 196 14 210 166 10 22 18 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 6 6 6 121 92 8
+238 202 15 232 195 16 82 82 82 34 34 34
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 38 38 38 70 70 70 154 122 46
+190 142 34 200 144 11 197 138 11 197 138 11
+213 154 11 226 170 11 242 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+225 175 15 46 32 6 2 2 6 22 22 22
+158 158 158 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 242 242 242 224 178 62
+239 182 13 236 186 11 213 154 11 46 32 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 61 42 6 225 175 15
+238 190 10 236 186 11 112 100 78 42 42 42
+ 14 14 14 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 54 54 54 154 122 46 213 154 11
+226 170 11 230 174 11 226 170 11 226 170 11
+236 178 12 242 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+241 196 14 184 144 12 10 10 10 2 2 6
+ 6 6 6 116 116 116 242 242 242 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 198 198 198 214 170 54
+236 178 12 236 178 12 210 150 10 137 92 6
+ 18 14 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 70 47 6 200 144 11 236 178 12
+239 182 13 239 182 13 124 112 88 58 58 58
+ 22 22 22 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 70 70 70 180 133 36 226 170 11
+239 182 13 242 186 14 242 186 14 246 186 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 232 195 16 98 70 6 2 2 6
+ 2 2 6 2 2 6 66 66 66 221 221 221
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 206 206 206 198 198 198 214 166 58
+230 174 11 230 174 11 216 158 10 192 133 9
+163 110 8 116 81 8 102 78 10 116 81 8
+167 114 7 197 138 11 226 170 11 239 182 13
+242 186 14 242 186 14 162 146 94 78 78 78
+ 34 34 34 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 30 30 30 78 78 78 190 142 34 226 170 11
+239 182 13 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 241 196 14 203 166 17 22 18 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+218 218 218 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 206 206 206 198 198 198 202 162 69
+226 170 11 236 178 12 224 166 10 210 150 10
+200 144 11 197 138 11 192 133 9 197 138 11
+210 150 10 226 170 11 242 186 14 246 190 14
+246 190 14 246 186 14 225 175 15 124 112 88
+ 62 62 62 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 174 135 50 224 166 10
+239 182 13 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 241 196 14 139 102 15
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 78 78 78 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 214 214 214 198 198 198 190 150 46
+219 162 10 236 178 12 234 174 13 224 166 10
+216 158 10 213 154 11 213 154 11 216 158 10
+226 170 11 239 182 13 246 190 14 246 190 14
+246 190 14 246 190 14 242 186 14 206 162 42
+101 101 101 58 58 58 30 30 30 14 14 14
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 74 74 74 174 135 50 216 158 10
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 241 196 14 226 184 13
+ 61 42 6 2 2 6 2 2 6 2 2 6
+ 22 22 22 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 226 226 226 187 187 187 180 133 36
+216 158 10 236 178 12 239 182 13 236 178 12
+230 174 11 226 170 11 226 170 11 230 174 11
+236 178 12 242 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 186 14 239 182 13
+206 162 42 106 106 106 66 66 66 34 34 34
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 26 26 26 70 70 70 163 133 67 213 154 11
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 241 196 14
+190 146 13 18 14 6 2 2 6 2 2 6
+ 46 46 46 246 246 246 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 221 221 221 86 86 86 156 107 11
+216 158 10 236 178 12 242 186 14 246 186 14
+242 186 14 239 182 13 239 182 13 242 186 14
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+242 186 14 225 175 15 142 122 72 66 66 66
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 26 26 26 70 70 70 163 133 67 210 150 10
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+232 195 16 121 92 8 34 34 34 106 106 106
+221 221 221 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+242 242 242 82 82 82 18 14 6 163 110 8
+216 158 10 236 178 12 242 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 242 186 14 163 133 67
+ 46 46 46 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 163 133 67 210 150 10
+236 178 12 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+241 196 14 215 174 15 190 178 144 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 218 218 218
+ 58 58 58 2 2 6 22 18 6 167 114 7
+216 158 10 236 178 12 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 186 14 242 186 14 190 150 46
+ 54 54 54 22 22 22 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 38 38 38 86 86 86 180 133 36 213 154 11
+236 178 12 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 232 195 16 190 146 13 214 214 214
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 170 170 170 26 26 26
+ 2 2 6 2 2 6 37 26 9 163 110 8
+219 162 10 239 182 13 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 236 178 12 224 166 10 142 122 72
+ 46 46 46 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 109 106 95 192 133 9 224 166 10
+242 186 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+242 186 14 226 184 13 210 162 10 142 110 46
+226 226 226 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+198 198 198 66 66 66 2 2 6 2 2 6
+ 2 2 6 2 2 6 50 34 6 156 107 11
+219 162 10 239 182 13 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 242 186 14
+234 174 13 213 154 11 154 122 46 66 66 66
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 58 58 58 154 121 60 206 145 10 234 174 13
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 236 178 12 210 162 10 163 110 8
+ 61 42 6 138 138 138 218 218 218 250 250 250
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 210 210 210 144 144 144 66 66 66
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 61 42 6 163 110 8
+216 158 10 236 178 12 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 239 182 13 230 174 11 216 158 10
+190 142 34 124 112 88 70 70 70 38 38 38
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 62 62 62 168 124 44 206 145 10 224 166 10
+236 178 12 239 182 13 242 186 14 242 186 14
+246 186 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 236 178 12 216 158 10 175 118 6
+ 80 54 7 2 2 6 6 6 6 30 30 30
+ 54 54 54 62 62 62 50 50 50 38 38 38
+ 14 14 14 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 80 54 7 167 114 7
+213 154 11 236 178 12 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 242 186 14 239 182 13 239 182 13
+230 174 11 210 150 10 174 135 50 124 112 88
+ 82 82 82 54 54 54 34 34 34 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 158 118 36 192 133 9 200 144 11
+216 158 10 219 162 10 224 166 10 226 170 11
+230 174 11 236 178 12 239 182 13 239 182 13
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 230 174 11 210 150 10 163 110 8
+104 69 6 10 10 10 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 91 60 6 167 114 7
+206 145 10 230 174 11 242 186 14 246 190 14
+246 190 14 246 190 14 246 186 14 242 186 14
+239 182 13 230 174 11 224 166 10 213 154 11
+180 133 36 124 112 88 86 86 86 58 58 58
+ 38 38 38 22 22 22 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 34 34 34 70 70 70 138 110 50 158 118 36
+167 114 7 180 123 7 192 133 9 197 138 11
+200 144 11 206 145 10 213 154 11 219 162 10
+224 166 10 230 174 11 239 182 13 242 186 14
+246 186 14 246 186 14 246 186 14 246 186 14
+239 182 13 216 158 10 185 133 11 152 99 6
+104 69 6 18 14 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 80 54 7 152 99 6
+192 133 9 219 162 10 236 178 12 239 182 13
+246 186 14 242 186 14 239 182 13 236 178 12
+224 166 10 206 145 10 192 133 9 154 121 60
+ 94 94 94 62 62 62 42 42 42 22 22 22
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 18 18 18 34 34 34 58 58 58 78 78 78
+101 98 89 124 112 88 142 110 46 156 107 11
+163 110 8 167 114 7 175 118 6 180 123 7
+185 133 11 197 138 11 210 150 10 219 162 10
+226 170 11 236 178 12 236 178 12 234 174 13
+219 162 10 197 138 11 163 110 8 130 83 6
+ 91 60 6 10 10 10 2 2 6 2 2 6
+ 18 18 18 38 38 38 38 38 38 38 38 38
+ 38 38 38 38 38 38 38 38 38 38 38 38
+ 38 38 38 38 38 38 26 26 26 2 2 6
+ 2 2 6 6 6 6 70 47 6 137 92 6
+175 118 6 200 144 11 219 162 10 230 174 11
+234 174 13 230 174 11 219 162 10 210 150 10
+192 133 9 163 110 8 124 112 88 82 82 82
+ 50 50 50 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 22 22 22 34 34 34
+ 42 42 42 58 58 58 74 74 74 86 86 86
+101 98 89 122 102 70 130 98 46 121 87 25
+137 92 6 152 99 6 163 110 8 180 123 7
+185 133 11 197 138 11 206 145 10 200 144 11
+180 123 7 156 107 11 130 83 6 104 69 6
+ 50 34 6 54 54 54 110 110 110 101 98 89
+ 86 86 86 82 82 82 78 78 78 78 78 78
+ 78 78 78 78 78 78 78 78 78 78 78 78
+ 78 78 78 82 82 82 86 86 86 94 94 94
+106 106 106 101 101 101 86 66 34 124 80 6
+156 107 11 180 123 7 192 133 9 200 144 11
+206 145 10 200 144 11 192 133 9 175 118 6
+139 102 15 109 106 95 70 70 70 42 42 42
+ 22 22 22 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 10 10 10
+ 14 14 14 22 22 22 30 30 30 38 38 38
+ 50 50 50 62 62 62 74 74 74 90 90 90
+101 98 89 112 100 78 121 87 25 124 80 6
+137 92 6 152 99 6 152 99 6 152 99 6
+138 86 6 124 80 6 98 70 6 86 66 30
+101 98 89 82 82 82 58 58 58 46 46 46
+ 38 38 38 34 34 34 34 34 34 34 34 34
+ 34 34 34 34 34 34 34 34 34 34 34 34
+ 34 34 34 34 34 34 38 38 38 42 42 42
+ 54 54 54 82 82 82 94 86 76 91 60 6
+134 86 6 156 107 11 167 114 7 175 118 6
+175 118 6 167 114 7 152 99 6 121 87 25
+101 98 89 62 62 62 34 34 34 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 6 6 6 10 10 10
+ 18 18 18 22 22 22 30 30 30 42 42 42
+ 50 50 50 66 66 66 86 86 86 101 98 89
+106 86 58 98 70 6 104 69 6 104 69 6
+104 69 6 91 60 6 82 62 34 90 90 90
+ 62 62 62 38 38 38 22 22 22 14 14 14
+ 10 10 10 10 10 10 10 10 10 10 10 10
+ 10 10 10 10 10 10 6 6 6 10 10 10
+ 10 10 10 10 10 10 10 10 10 14 14 14
+ 22 22 22 42 42 42 70 70 70 89 81 66
+ 80 54 7 104 69 6 124 80 6 137 92 6
+134 86 6 116 81 8 100 82 52 86 86 86
+ 58 58 58 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 10 10 10 14 14 14
+ 18 18 18 26 26 26 38 38 38 54 54 54
+ 70 70 70 86 86 86 94 86 76 89 81 66
+ 89 81 66 86 86 86 74 74 74 50 50 50
+ 30 30 30 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 34 34 34 58 58 58
+ 82 82 82 89 81 66 89 81 66 89 81 66
+ 94 86 66 94 86 76 74 74 74 50 50 50
+ 26 26 26 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 6 6 6 14 14 14 18 18 18
+ 30 30 30 38 38 38 46 46 46 54 54 54
+ 50 50 50 42 42 42 30 30 30 18 18 18
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 26 26 26
+ 38 38 38 50 50 50 58 58 58 58 58 58
+ 54 54 54 42 42 42 30 30 30 18 18 18
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 6 6 6 10 10 10 14 14 14 18 18 18
+ 18 18 18 14 14 14 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 14 14 14 18 18 18 22 22 22 22 22 22
+ 18 18 18 14 14 14 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
P3
-142 114
+# Standard 16-color Linux logo
+80 80
255
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 85 0 85 255 85 170 85 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 170 170 170
-170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 255 85
-255 85 85 85 255 85 170 170 170 170 85 0 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 85 85 85
-170 170 170 170 85 0 170 170 170 85 85 85 170 85 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
-85 85 85 85 85 85 170 85 0 85 255 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 85 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 170 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 85 0 85 255 85 170 85 0 170 85 0 170 85 0 85 255 85
-170 85 0 170 85 0 0 170 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 170 85 0
-255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 85 255 85 170 85 0 170 85 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-85 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 85 255 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 85 0 255 255 85 85 255 85 255 255 85
-170 170 170 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
-85 255 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 255 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 255 255 85
-170 85 0 170 85 0 0 170 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 85 0 85 255 85 255 255 85 170 170 170 255 255 255
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
-255 255 85 85 255 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 255 255 85 255 255 85 255 255 85 255 255 255 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 85 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 85 0 255 255 85 255 255 85 255 255 255 170 170 170
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-255 255 85 85 255 85 170 85 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-255 255 85 85 255 85 255 255 85 170 170 170 255 255 255 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 85 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-85 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 0
-170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 170 85 0 170 85 0
-170 85 0 85 255 85 255 255 85 85 85 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 255 85 170 170 170 170 170 170
-85 85 85 170 170 170 170 170 170 170 85 0 170 170 170 170 170 170
-85 255 85 170 170 170 170 85 0 170 170 170 85 255 85 255 85 85
-85 255 85 170 170 170 255 255 85 85 85 85 255 255 85 170 170 170
-85 255 85 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 255 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 170 85 0 0 170 0 85 85 85
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 255 85
-255 85 85 85 255 85 85 85 85 255 85 85 85 85 85 170 170 170
-170 85 0 170 170 170 85 85 85 85 255 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 85 85 85 85 85
-255 255 85 170 170 170 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 170 170 170 170 85 0 170 170 170
-170 170 170 255 255 85 170 170 170 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 170 85 0 170 85 0 0 170 0
-0 0 0 170 85 0 170 85 0 0 170 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
-170 170 170 85 85 85 85 85 85 170 170 170 170 85 0 85 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
-170 85 0 255 255 85 170 85 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-85 255 85 170 85 0 0 170 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 170 0 170 85 0 255 255 85
-85 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
-85 255 85 170 85 0 170 85 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 85 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 170 85 0
-0 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-255 255 85 85 255 85 170 85 0 170 85 0 85 255 85 170 85 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 85 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 255 255 85
-170 85 0 170 85 0 85 255 85 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 85 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 85 255 85
-170 85 0 255 255 85 170 85 0 85 255 85 170 85 0 170 85 0
-0 170 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 85 255 85 170 85 0
-255 255 85 170 85 0 0 170 0 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 170 85 0
-0 170 0 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-255 255 85 255 255 85 170 85 0 0 170 0 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 85 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 170 170 170
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
-170 170 170 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255
-255 255 255 170 170 170 170 170 170 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 255 255 255 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 255 255 255 255 255 255 255 255 255 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 170 170 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
-170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 255 255 255 255 255 255 0 0 0 0 0 0 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170 255 255 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-85 85 85 170 170 170 170 170 170 170 170 170 170 85 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 170 85 0
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 85 255 85 170 85 0 170 170 170 85 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 170 85 0 85 255 85
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 170 85 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 170 170 170 170 85 0 170 170 170 170 85 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 255 85 85 170 170 170 85 255 85 170 85 0
-85 85 85 85 85 85 170 85 0 85 85 85 170 170 170 85 85 85
-170 170 170 170 85 0 85 85 85 85 85 85 85 85 85 85 85 85
-170 85 0 85 255 85 85 85 85 85 85 85 85 85 85 170 85 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 170 170 170 170 85 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 255 85 170 170 170 170 170 170 170 85 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 255 85 255 85 85 170 170 170 170 170 170
-170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 85 0
-170 170 170 85 85 85 85 255 85 170 85 0 170 170 170 170 85 0
-170 170 170 170 170 170 170 85 0 85 85 85 85 85 85 85 255 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 170 170 170 170 170 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 255 255 85 85 85 85 85 85 85 85 85 85
-85 255 85 255 85 85 170 170 170 170 85 0 170 170 170 85 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 85 0 170 170 170 170 170 170 255 255 85
-170 170 170 255 85 85 170 170 170 170 170 170 255 255 85 170 170 170
-85 255 85 170 170 170 255 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 85 85 85
-85 85 85 170 85 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
-170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 85 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 170 170 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 170 170 85 85 85 170 170 170 170 85 0
-170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 255 255 255 85 170 170 170
-255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 255 255 85 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 85 85 170 170 170 170 170 170
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 85 85 85
-85 85 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 255 255 255
-255 255 85 255 255 255 255 255 85 170 170 170 170 170 170 170 85 0
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-255 255 255 255 255 255 255 255 85 255 255 255 255 255 255 170 170 170
-255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 170 170 170 170 170 170 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 85 170 170 170 255 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 170 85 0 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 255 255 85
-170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 255 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
-255 85 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 170 170
-255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 85
-170 170 170 170 85 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
-85 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 85
-170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-255 255 255 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 85 255 85
-255 85 85 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-170 170 170 170 170 170 255 255 85 170 170 170 255 85 85 85 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 170 170 170 255 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
-170 170 170 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 170 170 170 170 85 0 170 170 170 85 85 85
-170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 85 85 85
-85 255 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 85 0 170 170 170 85 255 85 170 85 0 170 170 170 85 85 85
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
-255 255 85 255 255 255 170 170 170 170 170 170 170 170 170 170 85 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 170 170
-170 85 0 170 85 0 170 170 170 85 255 85 85 85 85 170 170 170
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 85 85 85
-170 170 170 170 85 0 170 170 170 85 85 85 170 170 170 170 85 0
-170 170 170 85 255 85 170 85 0 170 170 170 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 170 170 255 255 85 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
-170 170 170 85 255 85 170 85 0 170 170 170 170 85 0 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 255 85 170 170 170 170 85 0 170 170 170 170 85 0 85 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 85 85 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
-170 170 170 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
-170 85 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 85 0
-85 85 85 255 85 85 85 255 85 170 85 0 170 170 170 170 170 170
-170 85 0 170 170 170 85 85 85 255 255 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 85 85 85 170 170 170
-85 255 85 255 85 85 170 170 170 85 255 85 255 85 85 85 255 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-85 85 85 85 255 85 255 85 85 170 170 170 85 255 85 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 85 85 85 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-85 85 85 255 255 85 170 170 170 170 85 0 170 170 170 85 85 85
-170 85 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
-170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 85 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 85 0 85 255 85 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-170 85 0 170 170 170 170 85 0 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 85 85 85
-170 85 0 85 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 85 0 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 255 85
-170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 85 0 170 170 170 170 170 170
-255 255 85 170 170 170 255 255 255 255 255 85 255 255 255 255 255 255
-170 170 170 255 255 85 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 170 170 170 255 255 255 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 255 255 255 255 255 85 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 170 170 170
-255 255 85 170 170 170 170 170 170 170 85 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 85 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 170 85 0 170 170 170
-255 255 85 170 170 170 255 255 85 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-170 85 0 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255 255 255 85 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 85 0 85 255 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 255 170 170 170 255 255 85 170 170 170 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 170 170 170
-170 85 0 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 85 0 85 85 85 170 85 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 85 0
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 255 85 170 85 0 170 170 170 170 85 0 170 170 170
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 85 85 85 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 170 170 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 170 170 170 255 255 255 255 255 255
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 170 170 170 170 170 170
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 0 0 0 0 0 0 255 255 255
+ 85 85 85 0 0 0 0 0 0 0 0 0
+255 255 255 170 170 170 0 0 0 85 85 85
+170 170 170 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 170 170 170
+ 85 85 85 0 0 0 0 0 0 0 0 0
+255 255 255 85 85 85 0 0 0 0 0 0
+ 85 85 85 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 0 0 0 0 0 0 170 170 170
+ 85 85 85 85 85 85 85 85 85 85 85 85
+255 255 255 85 85 85 0 0 0 0 0 0
+ 85 85 85 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 170 170 170 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 170 170 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 170 85 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 85 85 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 85 85 85 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 170 170 170 170 170 170 170 170 0 0 0
+ 0 0 0 0 0 0 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 85 85 85
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 85 85 85
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+ 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 85 85 85 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+ 85 85 85 0 0 0 0 0 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 170 85 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 85 85 85 85 85 85 170 85 0
+170 85 0 170 85 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
*/
static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 1);
+ fb_set_suspend(mx3fb->fbi, 1);
release_console_sem();
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
*/
static int mx3fb_resume(struct platform_device *pdev)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
}
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 0);
+ fb_set_suspend(mx3fb->fbi, 0);
release_console_sem();
return 0;
static int get_dss_clocks(void)
{
- if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) {
- dev_err(dispc.fbdev->dev, "can't get dss_ick\n");
+ dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick");
+ if (IS_ERR(dispc.dss_ick)) {
+ dev_err(dispc.fbdev->dev, "can't get ick\n");
return PTR_ERR(dispc.dss_ick);
}
- if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) {
+ dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck");
+ if (IS_ERR(dispc.dss1_fck)) {
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
clk_put(dispc.dss_ick);
return PTR_ERR(dispc.dss1_fck);
}
- if (IS_ERR((dispc.dss_54m_fck =
- clk_get(dispc.fbdev->dev, "dss_54m_fck")))) {
- dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n");
+ dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck");
+ if (IS_ERR(dispc.dss_54m_fck)) {
+ dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
clk_put(dispc.dss_ick);
clk_put(dispc.dss1_fck);
return PTR_ERR(dispc.dss_54m_fck);
static int rfbi_get_clocks(void)
{
- if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) {
- dev_err(rfbi.fbdev->dev, "can't get dss_ick\n");
+ rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick");
+ if (IS_ERR(rfbi.dss_ick)) {
+ dev_err(rfbi.fbdev->dev, "can't get ick\n");
return PTR_ERR(rfbi.dss_ick);
}
- if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) {
+ rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck");
+ if (IS_ERR(rfbi.dss1_fck)) {
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
clk_put(rfbi.dss_ick);
return PTR_ERR(rfbi.dss1_fck);
static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
{
struct pxafb_info *fbi = dev_id;
- unsigned int lccr0, lcsr, lcsr1;
+ unsigned int lccr0, lcsr;
lcsr = lcd_readl(fbi, LCSR);
if (lcsr & LCSR_LDD) {
lcd_writel(fbi, LCSR, lcsr);
#ifdef CONFIG_FB_PXA_OVERLAY
- lcsr1 = lcd_readl(fbi, LCSR1);
- if (lcsr1 & LCSR1_BS(1))
- complete(&fbi->overlay[0].branch_done);
+ {
+ unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
+ if (lcsr1 & LCSR1_BS(1))
+ complete(&fbi->overlay[0].branch_done);
- if (lcsr1 & LCSR1_BS(2))
- complete(&fbi->overlay[1].branch_done);
+ if (lcsr1 & LCSR1_BS(2))
+ complete(&fbi->overlay[1].branch_done);
- lcd_writel(fbi, LCSR1, lcsr1);
+ lcd_writel(fbi, LCSR1, lcsr1);
+ }
#endif
return IRQ_HANDLED;
}
int win;
for (win = 0; win <= S3C_FB_MAX_WIN; win++)
- s3c_fb_release_win(sfb, sfb->windows[win]);
+ if (sfb->windows[win])
+ s3c_fb_release_win(sfb, sfb->windows[win]);
iounmap(sfb->regs);
static int s3c_fb_resume(struct platform_device *pdev)
{
struct s3c_fb *sfb = platform_get_drvdata(pdev);
+ struct s3c_fb_platdata *pd = sfb->pdata;
struct s3c_fb_win *win;
int win_no;
clk_enable(sfb->bus_clk);
+ /* setup registers */
+ writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+ /* zero all windows before we do anything */
+ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+ s3c_fb_clear_win(sfb, win_no);
+
+ /* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
if (!win)
static const struct svga_fb_format s3fb_formats[] = {
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
{16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
extern void (*sa1100fb_backlight_power)(int on);
extern void (*sa1100fb_lcd_power)(int on);
-/*
- * IMHO this looks wrong. In 8BPP, length should be 8.
- */
-static struct sa1100fb_rgb rgb_8 = {
+static struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
+static struct sa1100fb_rgb rgb_8 = {
+ .red = { .offset = 0, .length = 8, },
+ .green = { .offset = 0, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
static struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
- rgbidx = RGB_8;
+ rgbidx = RGB_4;
break;
case 8:
rgbidx = RGB_8;
fbi->fb.monspecs = monspecs;
fbi->fb.pseudo_palette = (fbi + 1);
+ fbi->rgb[RGB_4] = &rgb_4;
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
unsigned long lccr3;
};
-#define RGB_8 (0)
-#define RGB_16 (1)
-#define NR_RGB 2
+#define RGB_4 (0)
+#define RGB_8 (1)
+#define RGB_16 (2)
+#define NR_RGB 3
struct sa1100fb_info {
struct fb_info fb;
#endif
unsigned long lddckr;
struct sh_mobile_lcdc_chan ch[2];
+ int started;
};
/* shared registers */
/* start the lcdc */
sh_mobile_lcdc_start_stop(priv, 1);
+ priv->started = 1;
/* tell the board code to enable the panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
}
/* stop the lcdc */
- sh_mobile_lcdc_start_stop(priv, 0);
+ if (priv->started) {
+ sh_mobile_lcdc_start_stop(priv, 0);
+ priv->started = 0;
+ }
/* stop clocks */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
switch(var->bits_per_pixel) {
case 8:
var->red.offset = var->green.offset = var->blue.offset = 0;
- var->red.length = var->green.length = var->blue.length = 6;
+ var->red.length = var->green.length = var->blue.length = 8;
break;
case 16:
var->red.offset = 11;
* color depth = SUM(var->{color}.length)
*
* Pseudocolor:
- * var->{color}.offset is 0
- * var->{color}.length contains width of DAC or the number of unique
- * colors available (color depth)
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of
+ * available palette entries
* pseudo_palette is not used
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = var->{color}.length
/* Trailing bits */
if (last)
- *dst = comp(pat, *dst, first);
+ *dst = comp(pat, *dst, last);
}
}
void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
fill_op = bitfill_unaligned;
break;
default:
- printk(KERN_ERR "cfb_fillrect(): unknown rop, "
+ printk(KERN_ERR "sys_fillrect(): unknown rop, "
"defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
static u16 maxhf __devinitdata; /* maximum horizontal frequency */
static u16 vbemode __devinitdata; /* force use of a specific VBE mode */
static char *mode_option __devinitdata;
+static u8 dac_width = 6;
static struct uvesafb_ktask *uvfb_tasks[UVESAFB_TASKS_MAX];
static DEFINE_MUTEX(uvfb_lock);
var->blue.offset = 0;
var->transp.offset = 0;
- /*
- * We're assuming that we can switch the DAC to 8 bits. If
- * this proves to be incorrect, we'll update the fields
- * later in set_par().
- */
- if (par->vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) {
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- var->transp.length = 0;
- } else {
- var->red.length = 6;
- var->green.length = 6;
- var->blue.length = 6;
- var->transp.length = 0;
- }
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
}
}
struct fb_info *info)
{
struct uvesafb_pal_entry entry;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int err = 0;
if (regno >= info->cmap.len)
static int uvesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
{
struct uvesafb_pal_entry *entries;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int i, err = 0;
if (info->var.bits_per_pixel == 8) {
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f ||
((task->t.regs.ebx & 0xff00) >> 8) != 8) {
- /*
- * We've failed to set the DAC palette format -
- * time to correct var.
- */
- info->var.red.length = 6;
- info->var.green.length = 6;
- info->var.blue.length = 6;
+ dac_width = 6;
+ } else {
+ dac_width = 8;
}
}
* {hardwarespecific} contains width of RAMDAC
* cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
- *
+ *
* Pseudocolor:
- * uses offset = 0 && length = RAMDAC register width.
- * var->{color}.offset is 0
- * var->{color}.length contains widht of DAC
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of available
+ * palette entries
* cmap is not used
* RAMDAC[X] is programmed to (red, green, blue)
+ *
* Truecolor:
* does not use DAC. Usually 3 are present.
* var->{color}.offset contains start of bitfield
static int __devinit via_pci_probe(void)
{
- unsigned int default_xres, default_yres;
+ unsigned long default_xres, default_yres;
char *tmpc, *tmpm;
char *tmpc_sec, *tmpm_sec;
int vmode_index;
viafb_FB_MM = viaparinfo->fbmem_virt;
tmpm = viafb_mode;
tmpc = strsep(&tmpm, "x");
- strict_strtoul(tmpc, 0, (unsigned long *)&default_xres);
- strict_strtoul(tmpm, 0, (unsigned long *)&default_yres);
+ strict_strtoul(tmpc, 0, &default_xres);
+ strict_strtoul(tmpm, 0, &default_yres);
vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
try_to_freeze();
wait_event_interruptible(vb->config_change,
(diff = towards_target(vb)) != 0
- || kthread_should_stop());
+ || kthread_should_stop()
+ || freezing(current));
if (diff > 0)
fill_balloon(vb, diff);
else if (diff < 0)
To compile this driver as a module, choose M here: the
module will be called orion5x_wdt.
-# ARM26 Architecture
-
# AVR32 Architecture
config AT32AP700X_WDT
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
-# ARM26 Architecture
-
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
.fops = &at91wdt_fops,
};
-static int __init at91wdt_probe(struct platform_device *pdev)
+static int __devinit at91wdt_probe(struct platform_device *pdev)
{
int res;
return 0;
}
-static int __exit at91wdt_remove(struct platform_device *pdev)
+static int __devexit at91wdt_remove(struct platform_device *pdev)
{
int res;
static struct platform_driver at91wdt_driver = {
.probe = at91wdt_probe,
- .remove = __exit_p(at91wdt_remove),
+ .remove = __devexit_p(at91wdt_remove),
.shutdown = at91wdt_shutdown,
.suspend = at91wdt_suspend,
.resume = at91wdt_resume,
#define ESB_LOCK_REG 0x68 /* WDT lock register */
/* Memory mapped registers */
-#define ESB_TIMER1_REG BASEADDR + 0x00 /* Timer1 value after each reset */
-#define ESB_TIMER2_REG BASEADDR + 0x04 /* Timer2 value after each reset */
-#define ESB_GINTSR_REG BASEADDR + 0x08 /* General Interrupt Status Register */
-#define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */
+#define ESB_TIMER1_REG (BASEADDR + 0x00)/* Timer1 value after each reset */
+#define ESB_TIMER2_REG (BASEADDR + 0x04)/* Timer2 value after each reset */
+#define ESB_GINTSR_REG (BASEADDR + 0x08)/* General Interrupt Status Register */
+#define ESB_RELOAD_REG (BASEADDR + 0x0c)/* Reload register */
/* Lock register bits */
#define ESB_WDT_FUNC (0x01 << 2) /* Watchdog functionality */
#define ESB_WDT_INTTYPE (0x11 << 0) /* Interrupt type on timer1 timeout */
/* Reload register bits */
+#define ESB_WDT_TIMEOUT (0x01 << 9) /* Watchdog timed out */
#define ESB_WDT_RELOAD (0x01 << 8) /* prevent timeout */
/* Magic constants */
/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
#define WATCHDOG_HEARTBEAT 30
static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
"Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
esb_unlock_registers();
writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
/* Enable or Enable + Lock? */
- val = 0x02 | (nowayout ? 0x01 : 0x00);
+ val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
spin_unlock(&esb_lock);
return 0;
spin_unlock(&esb_lock);
/* Returns 0 if the timer was disabled, non-zero otherwise */
- return (val & 0x01);
+ return val & ESB_WDT_ENABLE;
}
static void esb_timer_keepalive(void)
return 0;
}
-static int esb_timer_read(void)
-{
- u32 count;
-
- /* This isn't documented, and doesn't take into
- * acount which stage is running, but it looks
- * like a 20 bit count down, so we might as well report it.
- */
- pci_read_config_dword(esb_pci, 0x64, &count);
- return (int)count;
-}
-
/*
* /dev/watchdog handling
*/
sizeof(ident)) ? -EFAULT : 0;
case WDIOC_GETSTATUS:
- return put_user(esb_timer_read(), p);
+ return put_user(0, p);
case WDIOC_GETBOOTSTATUS:
return put_user(triggered, p);
static unsigned char __devinit esb_getdevice(void)
{
- u8 val1;
- unsigned short val2;
/*
* Find the PCI device
*/
esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ESB_9, NULL);
- if (esb_pci) {
- if (pci_enable_device(esb_pci)) {
- printk(KERN_ERR PFX "failed to enable device\n");
- goto err_devput;
- }
+ if (!esb_pci)
+ return 0;
- if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
- printk(KERN_ERR PFX "failed to request region\n");
- goto err_disable;
- }
+ if (pci_enable_device(esb_pci)) {
+ printk(KERN_ERR PFX "failed to enable device\n");
+ goto err_devput;
+ }
- BASEADDR = pci_ioremap_bar(esb_pci, 0);
- if (BASEADDR == NULL) {
- /* Something's wrong here, BASEADDR has to be set */
- printk(KERN_ERR PFX "failed to get BASEADDR\n");
- goto err_release;
- }
+ if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+ printk(KERN_ERR PFX "failed to request region\n");
+ goto err_disable;
+ }
- /*
- * The watchdog has two timers, it can be setup so that the
- * expiry of timer1 results in an interrupt and the expiry of
- * timer2 results in a reboot. We set it to not generate
- * any interrupts as there is not much we can do with it
- * right now.
- *
- * We also enable reboots and set the timer frequency to
- * the PCI clock divided by 2^15 (approx 1KHz).
- */
- pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
-
- /* Check that the WDT isn't already locked */
- pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
- if (val1 & ESB_WDT_LOCK)
- printk(KERN_WARNING PFX "nowayout already set\n");
-
- /* Set the timer to watchdog mode and disable it for now */
- pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
-
- /* Check if the watchdog was previously triggered */
- esb_unlock_registers();
- val2 = readw(ESB_RELOAD_REG);
- triggered = (val2 & (0x01 << 9) >> 9);
-
- /* Reset trigger flag and timers */
- esb_unlock_registers();
- writew((0x11 << 8), ESB_RELOAD_REG);
-
- /* Done */
- return 1;
+ BASEADDR = pci_ioremap_bar(esb_pci, 0);
+ if (BASEADDR == NULL) {
+ /* Something's wrong here, BASEADDR has to be set */
+ printk(KERN_ERR PFX "failed to get BASEADDR\n");
+ goto err_release;
+ }
+
+ /* Done */
+ return 1;
err_release:
- pci_release_region(esb_pci, 0);
+ pci_release_region(esb_pci, 0);
err_disable:
- pci_disable_device(esb_pci);
+ pci_disable_device(esb_pci);
err_devput:
- pci_dev_put(esb_pci);
- }
+ pci_dev_put(esb_pci);
return 0;
}
+static void __devinit esb_initdevice(void)
+{
+ u8 val1;
+ u16 val2;
+
+ /*
+ * Config register:
+ * Bit 5 : 0 = Enable WDT_OUTPUT
+ * Bit 2 : 0 = set the timer frequency to the PCI clock
+ * divided by 2^15 (approx 1KHz).
+ * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
+ * The watchdog has two timers, it can be setup so that the
+ * expiry of timer1 results in an interrupt and the expiry of
+ * timer2 results in a reboot. We set it to not generate
+ * any interrupts as there is not much we can do with it
+ * right now.
+ */
+ pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
+
+ /* Check that the WDT isn't already locked */
+ pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
+ if (val1 & ESB_WDT_LOCK)
+ printk(KERN_WARNING PFX "nowayout already set\n");
+
+ /* Set the timer to watchdog mode and disable it for now */
+ pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
+
+ /* Check if the watchdog was previously triggered */
+ esb_unlock_registers();
+ val2 = readw(ESB_RELOAD_REG);
+ if (val2 & ESB_WDT_TIMEOUT)
+ triggered = WDIOF_CARDRESET;
+
+ /* Reset WDT_TIMEOUT flag and timers */
+ esb_unlock_registers();
+ writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);
+
+ /* And set the correct timeout value */
+ esb_timer_set_heartbeat(heartbeat);
+}
+
static int __devinit esb_probe(struct platform_device *dev)
{
int ret;
/* Check that the heartbeat value is within it's range;
if not reset to the default */
- if (esb_timer_set_heartbeat(heartbeat)) {
- esb_timer_set_heartbeat(WATCHDOG_HEARTBEAT);
+ if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
+ heartbeat = WATCHDOG_HEARTBEAT;
printk(KERN_INFO PFX
"heartbeat value must be 1<heartbeat<2046, using %d\n",
heartbeat);
}
+ /* Initialize the watchdog and make sure it does not run */
+ esb_initdevice();
+
+ /* Register the watchdog so that userspace has access to it */
ret = misc_register(&esb_miscdev);
if (ret != 0) {
printk(KERN_ERR PFX
WATCHDOG_MINOR, ret);
goto err_unmap;
}
- esb_timer_stop();
printk(KERN_INFO PFX
"initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
BASEADDR, heartbeat, nowayout);
err_unmap:
iounmap(BASEADDR);
-/* err_release: */
pci_release_region(esb_pci, 0);
-/* err_disable: */
pci_disable_device(esb_pci);
-/* err_devput: */
pci_dev_put(esb_pci);
return ret;
}
.fops = &ks8695wdt_fops,
};
-static int __init ks8695wdt_probe(struct platform_device *pdev)
+static int __devinit ks8695wdt_probe(struct platform_device *pdev)
{
int res;
return 0;
}
-static int __exit ks8695wdt_remove(struct platform_device *pdev)
+static int __devexit ks8695wdt_remove(struct platform_device *pdev)
{
int res;
static struct platform_driver ks8695wdt_driver = {
.probe = ks8695wdt_probe,
- .remove = __exit_p(ks8695wdt_remove),
+ .remove = __devexit_p(ks8695wdt_remove),
.shutdown = ks8695wdt_shutdown,
.suspend = ks8695wdt_suspend,
.resume = ks8695wdt_resume,
.release = omap_wdt_release,
};
-static int __init omap_wdt_probe(struct platform_device *pdev)
+static int __devinit omap_wdt_probe(struct platform_device *pdev)
{
struct resource *res, *mem;
struct omap_wdt_dev *wdev;
omap_wdt_disable(wdev);
}
-static int omap_wdt_remove(struct platform_device *pdev)
+static int __devexit omap_wdt_remove(struct platform_device *pdev)
{
struct omap_wdt_dev *wdev = platform_get_drvdata(pdev);
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
static struct platform_driver omap_wdt_driver = {
.probe = omap_wdt_probe,
- .remove = omap_wdt_remove,
+ .remove = __devexit_p(omap_wdt_remove),
.shutdown = omap_wdt_shutdown,
.suspend = omap_wdt_suspend,
.resume = omap_wdt_resume,
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <mach/bridge-regs.h>
#include <plat/orion5x_wdt.h>
/*
static unsigned long wdt_status;
static spinlock_t wdt_lock;
-static void wdt_enable(void)
+static void orion5x_wdt_ping(void)
+{
+ spin_lock(&wdt_lock);
+
+ /* Reload watchdog duration */
+ writel(wdt_tclk * heartbeat, WDT_VAL);
+
+ spin_unlock(&wdt_lock);
+}
+
+static void orion5x_wdt_enable(void)
{
u32 reg;
spin_unlock(&wdt_lock);
}
-static void wdt_disable(void)
+static void orion5x_wdt_disable(void)
{
u32 reg;
if (test_and_set_bit(WDT_IN_USE, &wdt_status))
return -EBUSY;
clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
- wdt_enable();
+ orion5x_wdt_enable();
return nonseekable_open(inode, file);
}
set_bit(WDT_OK_TO_CLOSE, &wdt_status);
}
}
- wdt_enable();
+ orion5x_wdt_ping();
}
return len;
}
-static struct watchdog_info ident = {
+static int orion5x_wdt_settimeout(int new_time)
+{
+ if ((new_time <= 0) || (new_time > wdt_max_duration))
+ return -EINVAL;
+
+ /* Set new watchdog time to be used when
+ * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+ heartbeat = new_time;
+ return 0;
+}
+
+static const struct watchdog_info ident = {
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING,
.identity = "Orion5x Watchdog",
};
-
static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
break;
case WDIOC_KEEPALIVE:
- wdt_enable();
+ orion5x_wdt_ping();
ret = 0;
break;
if (ret)
break;
- if (time <= 0 || time > wdt_max_duration) {
+ if (orion5x_wdt_settimeout(time)) {
ret = -EINVAL;
break;
}
- heartbeat = time;
- wdt_enable();
+ orion5x_wdt_ping();
/* Fall through */
case WDIOC_GETTIMEOUT:
static int orion5x_wdt_release(struct inode *inode, struct file *file)
{
if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
- wdt_disable();
+ orion5x_wdt_disable();
else
printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
"timer will not stop\n");
orion5x_wdt_miscdev.parent = &pdev->dev;
wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
- if (heartbeat <= 0 || heartbeat > wdt_max_duration)
+ if (orion5x_wdt_settimeout(heartbeat))
heartbeat = wdt_max_duration;
ret = misc_register(&orion5x_wdt_miscdev);
int ret;
if (test_bit(WDT_IN_USE, &wdt_status)) {
- wdt_disable();
+ orion5x_wdt_disable();
clear_bit(WDT_IN_USE, &wdt_status);
}
return ret;
}
+static void orion5x_wdt_shutdown(struct platform_device *pdev)
+{
+ if (test_bit(WDT_IN_USE, &wdt_status))
+ orion5x_wdt_disable();
+}
+
static struct platform_driver orion5x_wdt_driver = {
.probe = orion5x_wdt_probe,
.remove = __devexit_p(orion5x_wdt_remove),
+ .shutdown = orion5x_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
.name = "orion5x_wdt",
MODULE_DESCRIPTION("Orion5x Processor Watchdog");
module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds");
+MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
char *buf)
{
return sprintf(buf, "%llu\n",
- (u64)balloon_stats.target_pages << PAGE_SHIFT);
+ (unsigned long long)balloon_stats.target_pages
+ << PAGE_SHIFT);
}
static ssize_t store_target(struct sys_device *dev,
set_cpu_present(cpu, false);
}
-static void vcpu_hotplug(unsigned int cpu)
+static int vcpu_online(unsigned int cpu)
{
int err;
char dir[32], state[32];
- if (!cpu_possible(cpu))
- return;
-
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
- return;
+ return err;
}
- if (strcmp(state, "online") == 0) {
+ if (strcmp(state, "online") == 0)
+ return 1;
+ else if (strcmp(state, "offline") == 0)
+ return 0;
+
+ printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu);
+ return -EINVAL;
+}
+static void vcpu_hotplug(unsigned int cpu)
+{
+ if (!cpu_possible(cpu))
+ return;
+
+ switch (vcpu_online(cpu)) {
+ case 1:
enable_hotplug_cpu(cpu);
- } else if (strcmp(state, "offline") == 0) {
+ break;
+ case 0:
(void)cpu_down(cpu);
disable_hotplug_cpu(cpu);
- } else {
- printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n",
- state, cpu);
+ break;
+ default:
+ break;
}
}
static int setup_cpu_watcher(struct notifier_block *notifier,
unsigned long event, void *data)
{
+ int cpu;
static struct xenbus_watch cpu_watch = {
.node = "cpu",
.callback = handle_vcpu_hotplug_event};
(void)register_xenbus_watch(&cpu_watch);
+ for_each_possible_cpu(cpu) {
+ if (vcpu_online(cpu) == 0) {
+ (void)cpu_down(cpu);
+ cpu_clear(cpu, cpu_present_map);
+ }
+ }
+
return NOTIFY_DONE;
}
if (irq == nr_irqs)
panic("No available IRQ to bind to: increase nr_irqs!\n");
- desc = irq_to_desc_alloc_cpu(irq, 0);
+ desc = irq_to_desc_alloc_node(irq, 0);
if (WARN_ON(desc == NULL))
return -1;
}
/* Rebind an evtchn so that it gets delivered to a specific cpu */
-static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
+static int rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
{
struct evtchn_bind_vcpu bind_vcpu;
int evtchn = evtchn_from_irq(irq);
if (!VALID_EVTCHN(evtchn))
- return;
+ return -1;
/* Send future instances of this interrupt to other vcpu. */
bind_vcpu.port = evtchn;
*/
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0)
bind_evtchn_to_cpu(evtchn, tcpu);
-}
+ return 0;
+}
-static void set_affinity_irq(unsigned irq, const struct cpumask *dest)
+static int set_affinity_irq(unsigned irq, const struct cpumask *dest)
{
unsigned tcpu = cpumask_first(dest);
- rebind_irq_to_cpu(irq, tcpu);
+
+ return rebind_irq_to_cpu(irq, tcpu);
}
int resend_irq_on_evtchn(unsigned int irq)
gnttab_resume();
xen_mm_unpin_all();
- sysdev_resume();
-
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
+ sysdev_resume();
+ device_power_up(PMSG_RESUME);
+
return 0;
}
*.bin
*.csp
*.dsp
+ihex2fw
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
cxgb3/t3c_psram-1.1.0.bin \
cxgb3/t3fw-7.1.0.bin
+fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
sb16/ima_adpcm_init.csp \
sb16/ima_adpcm_playback.csp \
sb16/ima_adpcm_capture.csp
-fw-shipped-$(CONFIG_SLICOSS) += slicoss/gbdownload.sys slicoss/gbrcvucode.sys \
- slicoss/oasisdbgdownload.sys \
- slicoss/oasisdownload.sys \
- slicoss/oasisrcvucode.sys
-fw-shipped-$(CONFIG_SXG) += sxg/saharadownloadB.sys \
- sxg/saharadbgdownloadB.sys
fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
tigon/tg3_tso5.bin
cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
quiet_cmd_ihex2fw = IHEX2FW $@
- cmd_ihex2fw = $(objtree)/scripts/ihex2fw $< $@
+ cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
quiet_cmd_h16tofw = H16TOFW $@
- cmd_h16tofw = $(objtree)/scripts/ihex2fw -w $< $@
+ cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
quiet_cmd_fwbin = MK_FW $@
cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex)
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
# .HEX is also Intel HEX, but where the offset and length in each record
# is actually meaningful, because the firmware has to be loaded in a certain
# order rather than as a single binary blob. Thus, we convert them into our
# more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,ihex2fw)
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
$(call cmd,h16tofw)
$(firmware-dirs):
# Without this, built-in.o won't be created when it's empty, and the
# final vmlinux link will fail.
obj-n := dummy
+
+hostprogs-y := ihex2fw
--- /dev/null
+
+ DO NOT ADD FIRMWARE TO THIS DIRECTORY.
+ ======================================
+
+This directory is only here to contain firmware images extracted from old
+device drivers which predate the common use of request_firmware().
+
+As we update those drivers to use request_firmware() and keep a clean
+separation between code and firmware, we put the extracted firmware
+here.
+
+This directory is _NOT_ for adding arbitrary new firmware images. The
+place to add those is the separate linux-firmware repository:
+
+ git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git
+
+That repository contains all these firmware images which have been
+extracted from older drivers, as well various new firmware images which
+we were never permitted to include in a GPL'd work, but which we _have_
+been permitted to redistribute under separate cover.
+
+To submit firmware to that repository, please send either a git binary
+diff or preferably a git pull request to:
+ David Woodhouse <dwmw2@infradead.org>
+
+Your commit should include an update to the WHENCE file clearly
+identifying the licence under which the firmware is available, and
+that it is redistributable. If the licence is long and involved, it's
+permitted to include it in a separate file and refer to it from the
+WHENCE file.
+
+Ideally, your commit should contain a Signed-Off-By: from someone
+authoritative on the licensing of the firmware in question (i.e. from
+within the company that owns the code).
--------------------------------------------------------------------------
+Driver: ambassador -- Madge Ambassador (Collage PCI 155 Server) ATM NIC.
+
+File: firmware/atmsar11.fw
+
+Licence: Allegedly GPLv2+, but no source visible. Marked:
+
+ Madge Ambassador ATM Adapter microcode.
+ Copyright (C) 1995-1999 Madge Networks Ltd.
+
+ This microcode data is placed under the terms of the GNU General
+ Public License. The GPL is contained in /usr/doc/copyright/GPL on a
+ Debian system and in the file COPYING in the Linux kernel source.
+
+ We would prefer you not to distribute modified versions without
+ consultation and not to ask for assembly/other microcode source.
+
+--------------------------------------------------------------------------
+
Driver: korg1212 -- Korg 1212 IO audio device
File: korg/k1212.dsp
--------------------------------------------------------------------------
-Driver: SLICOSS - Alacritech IS-NIC products
-
-File: slicoss/gbdownload.sys.ihex
-File: slicoss/gbrcvucode.sys.ihex
-File: slicoss/oasisdbgdownload.sys.ihex
-File: slicoss/oasisdownload.sys.ihex
-File: slicoss/oasisrcvucode.sys.ihex
-
-Licence:
- Copyright (C) 1999-2009 Alacritech, Inc.
-
- as an unpublished work. This notice does not imply unrestricted or
- public access to the source code from which this firmware image is
- derived. Except as noted below this firmware image may not be
- reproduced, used, sold or transferred to any third party without
- Alacritech's prior written consent. All Rights Reserved.
-
- Permission is hereby granted for the distribution of this firmware
- image as part of a Linux or other Open Source operating system kernel
- in text or binary form as required.
-
- This firmware may not be modified and may only be used with
- Alacritech hardware.
-
-Found in hex form in kernel source.
-
---------------------------------------------------------------------------
-
-Driver: SXG - Alacritech IS-NIC products
-
-File: sxg/saharadownloadB.sys.ihex
-File: sxg/saharadbgdownloadB.sys.ihex
-
-Licence:
- Copyright (C) 1999-2009 Alacritech, Inc.
-
- as an unpublished work. This notice does not imply unrestricted or
- public access to the source code from which this firmware image is
- derived. Except as noted below this firmware image may not be
- reproduced, used, sold or transferred to any third party without
- Alacritech's prior written consent. All Rights Reserved.
-
- Permission is hereby granted for the distribution of this firmware
- image as part of a Linux or other Open Source operating system kernel
- in text or binary form as required.
-
- This firmware may not be modified and may only be used with
- Alacritech hardware.
-
-Found in hex form in kernel source.
-
---------------------------------------------------------------------------
-
Driver: cxgb3 - Chelsio Terminator 3 1G/10G Ethernet adapter
File: cxgb3/t3b_psram-1.1.0.bin.ihex
--------------------------------------------------------------------------
+Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter
+
+File: cis/LA-PCM.cis
+
+Licence: GPL
+
+Originally developed by the pcmcia-cs project
+
+--------------------------------------------------------------------------
+
Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA
File: ositech/Xilinx7OD.bin
Found in hex form in kernel source.
--------------------------------------------------------------------------
+
+Driver: DVB AV7110 -- AV7110 cards
+
+File: av7110/bootcode.bin
+
+Licence: GPLv2 or later
+
+ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S
+
+--------------------------------------------------------------------------
+
+Driver: wavefront - ISA WaveFront sound card
+
+File: yamaha/yss225_registers.bin
+
+Licence: Allegedly GPLv2+, but no source visible.
+
+Found in hex form in kernel source, with the following comment:
+ Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
+
+--------------------------------------------------------------------------
--- /dev/null
+/*
+ Boot.S: boot loader for Siemens DVB-S card
+
+ Copyright (C) 2001 Convergence integrated media GmbH
+ Written by Ralph Metzler
+ <rjkm@convergence.de>
+ Copyright (C) 2006 Matthieu CASTET <castet.mattheiu@free.fr>
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+
+*/
+
+/*
+ check AV711x_3_1.pdf for some hardware infos
+ build it with :
+ $ cc -mbig-endian -c Boot.S
+ $ ld -Ttext 0x2c000000 -EB -o Boot Boot.o
+ $ objcopy -Obinary Boot
+*/
+
+ .text
+ .align
+ .globl _start
+_start:
+ b reset // reset vector
+ movs pc, r14 // undefined
+ subs pc, r14, #4 // SWI
+ subs pc, r14, #4 // prefetch abort
+ subs pc, r14, #8 // data abort
+ subs pc, r14, #4 // reserved
+ subs pc, r14, #4 // IRQ
+ subs pc, r14, #4 // FIQ
+
+ .word tbl // table needed by firmware ROM
+tbl: .word (endtbl - tbl)
+ .word 0
+ .word conf
+endtbl: .word 0
+conf: .word 0xa5a55a5a
+ .word 0x001f1555
+ .word 0x00000009
+
+reset: ldr r13, buffer
+ ldr r4, flag
+ mov r0, #0
+ str r0, [r4]
+ str r0, [r4, #4]
+
+ ldr r1, wait_address
+ ldr r2, flag_address
+ ldr r3, sram
+
+copycode: // copy the code HW Sram
+ ldmia r1!, {r5-r12}
+ stmia r3!, {r5-r12}
+ cmp r1, r2
+ ble copycode
+ ldr pc, sram // jump to the copied code
+
+wait: ldrh r1, [r4] // wait for flag!=0
+ cmp r1, #0
+ beq wait
+
+ mov r1, r13 // buffer address
+ ldr r3, [r4,#4] // destaddr
+
+ ldrh r2, [r4,#2] // get segment length
+ add r2, r2, #63 // round length to next 64 bytes
+ movs r2, r2, lsr #6 // and divide by 64
+ moveq r0, #2 // if 0, set flag to 2, else signal
+ strh r0, [r4] // that buffer is accepted by setting to 0
+ beq wait
+
+copyloop:
+ ldmia r1!, {r5-r12}
+ stmia r3!, {r5-r12}
+ ldmia r1!, {r5-r12}
+ stmia r3!, {r5-r12}
+ subs r2, r2, #1
+ bne copyloop
+
+ eor r13, r13, #0x1400 // switch to other buffer
+ b wait
+
+// flag is stored at 0x2c0003f8, length at 0x2c0003fa,
+// destaddr at 0x2c0003fc
+
+flag: .word 0x2c0003f8
+
+
+// buffer 1 is at 0x2c000400, buffer 2 at 0x2c001000
+
+buffer: .word 0x2c000400
+
+sram: .word 0x9e000800
+wait_address: .word wait
+flag_address: .word flag
--- /dev/null
+:10000000EA00000EE1B0F00EE25EF004E25EF00401
+:10001000E25EF008E25EF004E25EF004E25EF0040C
+:100020002C0000240000000C000000002C00003414
+:1000300000000000A5A55A5A001F15550000000930
+:10004000E59FD07CE59F4074E3A00000E5840000BC
+:10005000E5840004E59F1070E59F2070E59F306403
+:10006000E8B11FE0E8A31FE0E1510002DAFFFFFB67
+:10007000E59FF050E1D410B0E35100000AFFFFFC0F
+:10008000E1A0100DE5943004E1D420B2E282203FDB
+:10009000E1B0232203A00002E1C400B00AFFFFF494
+:1000A000E8B11FE0E8A31FE0E8B11FE0E8A31FE00C
+:1000B000E25220011AFFFFF9E22DDB05EAFFFFEC17
+:1000C0002C0003F82C0004009E0008002C00007493
+:0400D0002C0000C040
+:00000001FF
--- /dev/null
+:100000000105D4F953E9FF17035338FF20040FC04B
+:1000100002002102060315390401416C6C69656414
+:100020002054656C657369732C4B2E4B00457468C6
+:1000300065726E6574204C414E20436172640043CA
+:10004000656E747265434F4D004C412D50434D0019
+:10005000FF1A0602100000020B1B08810108E06075
+:1000600000021F1B08820108E06020021F1B08839A
+:100070000108E06040021F1B08840108E060600284
+:100080001F1B08850108E06080021F1B088601080D
+:10009000E060A0021F1B08870108E060C0021F1B70
+:1000A00008880108E060E0021F1B08890108E06081
+:1000B00000031F1B088A0108E06020031F1B088B38
+:1000C0000108E06040031F1B088C0108E06060032A
+:1000D0001F1B088D0108E06080031F1B088E0108AC
+:1000E000E060A0031F1B088F0108E060C0031F1B16
+:0D00F00008900108E060E0031F1400FF000D
+:00000001FF
+#
+# Replacement CIS for Allied Telesis LA-PCM
+#
--- /dev/null
+/*
+ * Parser/loader for IHEX formatted data.
+ *
+ * Copyright © 2008 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2005 Jan Harkes <jaharkes@cs.cmu.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <stdint.h>
+#include <arpa/inet.h>
+#include <stdio.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+#define _GNU_SOURCE
+#include <getopt.h>
+
+
+struct ihex_binrec {
+ struct ihex_binrec *next; /* not part of the real data structure */
+ uint32_t addr;
+ uint16_t len;
+ uint8_t data[];
+};
+
+/**
+ * nybble/hex are little helpers to parse hexadecimal numbers to a byte value
+ **/
+static uint8_t nybble(const uint8_t n)
+{
+ if (n >= '0' && n <= '9') return n - '0';
+ else if (n >= 'A' && n <= 'F') return n - ('A' - 10);
+ else if (n >= 'a' && n <= 'f') return n - ('a' - 10);
+ return 0;
+}
+
+static uint8_t hex(const uint8_t *data, uint8_t *crc)
+{
+ uint8_t val = (nybble(data[0]) << 4) | nybble(data[1]);
+ *crc += val;
+ return val;
+}
+
+static int process_ihex(uint8_t *data, ssize_t size);
+static void file_record(struct ihex_binrec *record);
+static int output_records(int outfd);
+
+static int sort_records = 0;
+static int wide_records = 0;
+
+int usage(void)
+{
+ fprintf(stderr, "ihex2fw: Convert ihex files into binary "
+ "representation for use by Linux kernel\n");
+ fprintf(stderr, "usage: ihex2fw [<options>] <src.HEX> <dst.fw>\n");
+ fprintf(stderr, " -w: wide records (16-bit length)\n");
+ fprintf(stderr, " -s: sort records by address\n");
+ return 1;
+}
+
+int main(int argc, char **argv)
+{
+ int infd, outfd;
+ struct stat st;
+ uint8_t *data;
+ int opt;
+
+ while ((opt = getopt(argc, argv, "ws")) != -1) {
+ switch (opt) {
+ case 'w':
+ wide_records = 1;
+ break;
+ case 's':
+ sort_records = 1;
+ break;
+ default:
+ return usage();
+ }
+ }
+
+ if (optind + 2 != argc)
+ return usage();
+
+ if (!strcmp(argv[optind], "-"))
+ infd = 0;
+ else
+ infd = open(argv[optind], O_RDONLY);
+ if (infd == -1) {
+ fprintf(stderr, "Failed to open source file: %s",
+ strerror(errno));
+ return usage();
+ }
+ if (fstat(infd, &st)) {
+ perror("stat");
+ return 1;
+ }
+ data = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED, infd, 0);
+ if (data == MAP_FAILED) {
+ perror("mmap");
+ return 1;
+ }
+
+ if (!strcmp(argv[optind+1], "-"))
+ outfd = 1;
+ else
+ outfd = open(argv[optind+1], O_TRUNC|O_CREAT|O_WRONLY, 0644);
+ if (outfd == -1) {
+ fprintf(stderr, "Failed to open destination file: %s",
+ strerror(errno));
+ return usage();
+ }
+ if (process_ihex(data, st.st_size))
+ return 1;
+
+ output_records(outfd);
+ return 0;
+}
+
+static int process_ihex(uint8_t *data, ssize_t size)
+{
+ struct ihex_binrec *record;
+ uint32_t offset = 0;
+ uint8_t type, crc = 0, crcbyte = 0;
+ int i, j;
+ int line = 1;
+ int len;
+
+ i = 0;
+next_record:
+ /* search for the start of record character */
+ while (i < size) {
+ if (data[i] == '\n') line++;
+ if (data[i++] == ':') break;
+ }
+
+ /* Minimum record length would be about 10 characters */
+ if (i + 10 > size) {
+ fprintf(stderr, "Can't find valid record at line %d\n", line);
+ return -EINVAL;
+ }
+
+ len = hex(data + i, &crc); i += 2;
+ if (wide_records) {
+ len <<= 8;
+ len += hex(data + i, &crc); i += 2;
+ }
+ record = malloc((sizeof (*record) + len + 3) & ~3);
+ if (!record) {
+ fprintf(stderr, "out of memory for records\n");
+ return -ENOMEM;
+ }
+ memset(record, 0, (sizeof(*record) + len + 3) & ~3);
+ record->len = len;
+
+ /* now check if we have enough data to read everything */
+ if (i + 8 + (record->len * 2) > size) {
+ fprintf(stderr, "Not enough data to read complete record at line %d\n",
+ line);
+ return -EINVAL;
+ }
+
+ record->addr = hex(data + i, &crc) << 8; i += 2;
+ record->addr |= hex(data + i, &crc); i += 2;
+ type = hex(data + i, &crc); i += 2;
+
+ for (j = 0; j < record->len; j++, i += 2)
+ record->data[j] = hex(data + i, &crc);
+
+ /* check CRC */
+ crcbyte = hex(data + i, &crc); i += 2;
+ if (crc != 0) {
+ fprintf(stderr, "CRC failure at line %d: got 0x%X, expected 0x%X\n",
+ line, crcbyte, (unsigned char)(crcbyte-crc));
+ return -EINVAL;
+ }
+
+ /* Done reading the record */
+ switch (type) {
+ case 0:
+ /* old style EOF record? */
+ if (!record->len)
+ break;
+
+ record->addr += offset;
+ file_record(record);
+ goto next_record;
+
+ case 1: /* End-Of-File Record */
+ if (record->addr || record->len) {
+ fprintf(stderr, "Bad EOF record (type 01) format at line %d",
+ line);
+ return -EINVAL;
+ }
+ break;
+
+ case 2: /* Extended Segment Address Record (HEX86) */
+ case 4: /* Extended Linear Address Record (HEX386) */
+ if (record->addr || record->len != 2) {
+ fprintf(stderr, "Bad HEX86/HEX386 record (type %02X) at line %d\n",
+ type, line);
+ return -EINVAL;
+ }
+
+ /* We shouldn't really be using the offset for HEX86 because
+ * the wraparound case is specified quite differently. */
+ offset = record->data[0] << 8 | record->data[1];
+ offset <<= (type == 2 ? 4 : 16);
+ goto next_record;
+
+ case 3: /* Start Segment Address Record */
+ case 5: /* Start Linear Address Record */
+ if (record->addr || record->len != 4) {
+ fprintf(stderr, "Bad Start Address record (type %02X) at line %d\n",
+ type, line);
+ return -EINVAL;
+ }
+
+ /* These records contain the CS/IP or EIP where execution
+ * starts. Don't really know what to do with them. */
+ goto next_record;
+
+ default:
+ fprintf(stderr, "Unknown record (type %02X)\n", type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct ihex_binrec *records;
+
+static void file_record(struct ihex_binrec *record)
+{
+ struct ihex_binrec **p = &records;
+
+ while ((*p) && (!sort_records || (*p)->addr < record->addr))
+ p = &((*p)->next);
+
+ record->next = *p;
+ *p = record;
+}
+
+static int output_records(int outfd)
+{
+ unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0};
+ struct ihex_binrec *p = records;
+
+ while (p) {
+ uint16_t writelen = (p->len + 9) & ~3;
+
+ p->addr = htonl(p->addr);
+ p->len = htons(p->len);
+ write(outfd, &p->addr, writelen);
+ p = p->next;
+ }
+ /* EOF record is zero length, since we don't bother to represent
+ the type field in the binary version */
+ write(outfd, zeroes, 6);
+ return 0;
+}
+++ /dev/null
-:10000000020000000080000000000100000000006D
-:10001000008000001200004081B200001800004083
-:1000200081B200001E00004081B2000003000040C9
-:1000300081B20000000000A898B001000480A24036
-:10004000FD7F00000900A249DD7D00000000004C9A
-:1000500080B2010007000040D1B100000000004C58
-:1000600080B201000900A240757D000060000040E0
-:10007000619901000B00A8B17E3100000900004029
-:1000800081B200001100004081B2000000801FE931
-:1000900018310000000041E980B201000F0040E982
-:1000A00080B2000000000040A59901001600294020
-:1000B00081320000160014BC803200000F0093BC97
-:1000C000803200000000504081B2010000800040FA
-:1000D00081B2000010000040A59901001C002940D9
-:1000E000813200001C0014BC80320000110093BC5F
-:1000F000803200000000504081B2010001800040C9
-:1001000081B2000020000040A59901002200294092
-:1001100081320000220014BC803200000E0093BC2B
-:100120008032000000000049DD8101002B01004009
-:10013000813201003C01004081320100270014BCE3
-:1001400080320000140113BC80320000549500403E
-:1001500045990100FFFF0040E599010000002F4094
-:1001600049B1010000000040E1B101000000004B76
-:10017000B7B3010000000040B5B30100D900004052
-:10018000B333010000000040B6D30100320095E80F
-:1001900080320000FFFF00E880880100B8002640A0
-:1001A0008132000000000040FDB30100000000406B
-:1001B000FFB301003C002250836C000000000045AA
-:1001C000FD930100A5A500A6B4A701003C00A25024
-:1001D000B573000000010040813201003C00A245DF
-:1001E0008032000000000046FD9301004100004005
-:1001F00081B200007F000020F5CF01001C0100FA51
-:10020000B3330100A5A500DAB5AB01009900A250F7
-:10021000B563000000000044FD930100D5000044D8
-:10022000B333010000000040D5990100000000DA5E
-:10023000D7B10100FFFF00DAED8B0100D5000046C9
-:10024000B333010008000040D5990100000000DA36
-:10025000D7B10100FF0000DAEF8B0100FF0000DAE8
-:10026000E38F0100D5000048B33301003C0000409B
-:10027000D5990100FF0000DAD78D0100FFFF00DAF9
-:10028000F1DB0100FF0000DAE98B0100000000480B
-:10029000E9E30100D500004BB33301002C0000401E
-:1002A000D5990100000000DAD7B10100D500004C5B
-:1002B000B3330100FFFF00DAEBDB0100D500004E95
-:1002C000B3330100030000DA818801000000005C04
-:1002D00081E00100FFFF00DAB5DB01005C00264091
-:1002E00081320000010000DAB5CF010000F000A764
-:1002F000B4870100000000DA819401000000004092
-:10030000D8B10100D5000050B3330100FFFF00DA7F
-:10031000B58B01006200264CB5630000010000DAD5
-:10032000B5CF0100000000DADFB10100D5000052B6
-:10033000B3330100FF0000DA4B890100080000DA46
-:10034000DFF70100FF0000EFDF8B010069002240B2
-:10035000DF7F000000000047FD9301002000004007
-:10036000B39B0100D500004081320100060000402F
-:10037000D5990100080000DAD7E50100F80000DA9D
-:10038000B38B010034000040D5990100000000D972
-:10039000D7B10100020000D9D5C90100000000DA80
-:1003A000D7B1010022000040B39B0100D5000040FE
-:1003B0008132010000000048B5F30100030000DABB
-:1003C0007B89010000010040DD9B0100D500005D3C
-:1003D000B3330100FFFF00DAE78B01008A002640FB
-:1003E0008132000000000041FD9301000000005038
-:1003F000E7E3010000010040D5990100000000F68C
-:10040000E7970100000000F3D7B10100D500005EBE
-:10041000B3330100FF0000DAE58B01000000004863
-:10042000E5E3010008010040D5990100FF0000DA72
-:10043000B58F0100000000F7B5970100000000DA59
-:10044000D7B101003C010040D5990100000000F83F
-:10045000E5970100000000F2D7B101000002004062
-:10046000DD9B0100960022F5813200000000004271
-:10047000FD930100000000EED5B10100000000F680
-:10048000EB970100000000F5D7B10100080000EA79
-:10049000D4C90100000000F7E3970100000000F15B
-:1004A000D7B101003C0000EEDDCB0100000000EE02
-:1004B000D5B10100000000F8E9970100000000F448
-:1004C000D7B10100D500004AB3330100FFFF00DAC5
-:1004D000DD890100B700004081B20000000000404B
-:1004E000D5990100050000A6D6B101009A1300EBD2
-:1004F000D699010008000040D5990100000200A62D
-:10050000D6B10100010000EBD69901002C0000409B
-:10051000D5990100050000A6D6B101009A1300EBA1
-:10052000D69901003C010040D5990100000200402D
-:10053000D799010000000042FD9301003C000040FB
-:10054000D5990100000000A6D6B10100000100EB22
-:10055000D699010000010040D5990100060000A6CF
-:10056000D6B101009A1300EBD699010008010040B2
-:10057000D5990100000200A6D6B10100010000EBF0
-:10058000D699010000000040D9B1010000000040F0
-:10059000DFB1010006000040D5990100A00000A6CF
-:1005A000D6B10100640000404B99010000000040FA
-:1005B0007B99010002040040DD990100B70013BCE3
-:1005C0008032000002080040DD9901000000004C6C
-:1005D000DD910100B80095E88430000000002FE9AB
-:1005E000FAB3010000000040D1B10100FF00004259
-:1005F000808801003400004080CE0100B800A64091
-:1006000081320000C100004081320100028022409E
-:1006100080320000B800004081B200000000004FAE
-:1006200081B00100CA0009F981320000C80008F950
-:1006300081320000D4001FFDF9330000C7009EFD89
-:10064000813200000000004AF3930100000080485E
-:10065000F3930100000000FDF7B3010000008049A2
-:10066000F3930100000000FC19B10100CF000AF96A
-:1006700081320000000040FB81B20100000041FD1A
-:1006800081B20100000780F9F38F0100000742F9F1
-:10069000F38F0100D300A2FFF76F0000000043407A
-:1006A00081B201000000A2FFFBEF0000000080FC0F
-:1006B000E1B101000000804081B00100D80006FED9
-:1006C0008132000000000041B3E301001C0100FA88
-:1006D000B3C30000DA0000428DB00000000000410A
-:1006E0008DB001000004004083980100EB00004041
-:1006F000813201000000005083B0010000008496A8
-:1007000080B2000026010040813201002501004036
-:100710002D110100000000402D810100000000DAD1
-:10072000B5EB0100E400849680320000E500004053
-:10073000B593000000000040B5830100DE00A24137
-:1007400083500000000000422D810100260100417D
-:100750002D01010000000041B3C30100DA00A241F5
-:100760008D500000000080DAB5BF01000000004B92
-:1007700081B00100000000DB81D00100000000D941
-:10078000B9B3010000000040B8E30100000000DC44
-:10079000B9EB010000000041B8970100150000DC32
-:1007A000B9E70100000000412D810100000000DBDD
-:1007B00081B00100270100422D11010025010040F8
-:1007C0002D110100280100402D0101000000004111
-:1007D0002D910100260100408132010025010040D9
-:1007E0002D110100000000402D8101000000A241F8
-:1007F00081D000000000849680320100FF00A0DC60
-:10080000B96B0000F80000412D910000F800004194
-:100810002D810000D8000040B3330100000090DAC1
-:100820008BB000001100004588F401004000004436
-:1008300080CE01000000A44081B200000000A3446B
-:1008400089EC00000000004289D001000000004255
-:1008500087B00100D9000043B2330100000000500E
-:10086000B5F301000C01A0DA8B400000000000414C
-:100870008BC001000000004187C001000801A241B7
-:1008800089500000FFFF00458888010010000045E6
-:100890008AF40100120190448A40000000000041E7
-:1008A0008BC00100FFFF00458AA8010000008050B6
-:1008B0008BE0010000800040F99B010000C0004077
-:1008C000B3CF01001C0100FC193101001C0140DA0A
-:1008D00081320100000041DA81B2010000000041D4
-:1008E000F9C3010016019FDA813200000280004046
-:1008F00081B200000000004491B00100000000D966
-:100900002BB101001E019F9480320000180000945A
-:1009100092E4010000000048B5F301000000004926
-:10092000B497010000000041B3C301001D01A241C2
-:1009300091500000000080402BB1010029010051BE
-:1009400093B000002901004D93B000002901004937
-:1009500093B000000000004293B001002901A241C1
-:10096000935000000000804081B201000000104060
-:1009700081B201000000114081B20100000012406C
-:1009800081B201000000134081B201000000144058
-:1009900081B201000000154081B201000000164044
-:1009A00081B201000000174081B201000000184030
-:1009B00081B201000000194081B2010000001A401C
-:1009C00081B2010000001B4081B2010000001C4008
-:1009D00081B2010000001D4081B2010000001E40F4
-:1009E00081B2010000001F4081B201000000804080
-:1009F00081B2010000040040A199010000000050F4
-:100A0000A1D10100000000401BB001000000004027
-:100A100019B001000000004017B0010000000040C4
-:100A200015B001000000004013B0010000000040BC
-:100A300011B00100000000400FB0010000000040B4
-:100A40000DB00100000000400BB0010000000040AC
-:100A500009B001000000004007B0010000000040A4
-:100A600005B001000000004003B00100000000409C
-:100A700001B0010044012048A15100000000804065
-:100A800081B201005001224B747D000000008040C3
-:100A900081B201006000004B60990100000000B1CC
-:100AA0007EB101005101A840813200004E0100409A
-:100AB00081B20000040080409798010000000058B7
-:100AC00007900100F39F004081B200000000004445
-:100AD000A5B30100AF02004081320100C502004011
-:100AE000813201000000005C07900100F39F00408C
-:100AF000BFB300005F0122CC857F000000000051E1
-:100B000007900100F39F004081B200000000004008
-:100B100049B10100AE0300CBA3C90100D0140040CD
-:100B2000A19B01000000002046B101000000004828
-:100B3000F1B10100000000D0F1B10100000000CAD5
-:100B4000F1B10100000000D5E1B101000700004053
-:100B5000619901002000002062DD01006801A840C9
-:100B600081320000000000CC85930100C5020040E6
-:100B700081320100D014004043990100000000FAC6
-:100B8000BAB30100000000FAA4B30100000000F8AD
-:100B9000BCB3010000142F4081B00100000000E749
-:100BA000A7B30100000000D8A9B30100FF0000DDD9
-:100BB000818801000200004080F4010078010040BB
-:100BC00080C80100880100DD813200000000004083
-:100BD00010B100008901004081B200008A0100408C
-:100BE00081B200008B01004081B200008C01004006
-:100BF00081B200008D01004081B200008F010040F1
-:100C000081B200009101004081B200005501004016
-:100C100081B20000D201004081B2000055010040C5
-:100C200081B20000E001004081B20000E10100401B
-:100C300081B200007F02004081B2000080020040CB
-:100C400081B20000F19F004081B20000F29F00409D
-:100C500081B200007701004181C01A005A01514061
-:100C600081B21A005A01524081B21A005A0155400D
-:100C700081B21A005A01564081B21A005501918181
-:100C800080301A005A01454081B21A005501918204
-:100C900080301A005A01464081B200000000004036
-:100CA00089B0010000002F4081B001000014004015
-:100CB00049990100B50122DEE16D00000000004C01
-:100CC00049C101000000004181C001009401A2441B
-:100CD000816C00000000004C49D101009C012240C1
-:100CE000E16D00009801A2418150000055010041D2
-:100CF000BFB3000000000042BFB301005501A00FC8
-:100D0000BD6F0000000000DEE1B101000000004402
-:100D100049C10100B701004019990100000042409B
-:100D200081B20100000043FF85B00100000000DE39
-:100D300019B10100000042FF87B00100000043FF2D
-:100D4000E1B101000000004449C1010000002FFF93
-:100D5000E1B10100081400A480CC0100AC012640E0
-:100D6000813200000000004185C00100AA01A24CB0
-:100D700081500000B60122D281320000B10122412F
-:100D8000A56F00005501A2E081320000000000D2F2
-:100D9000C1B301000000005C8990010000004042E6
-:100DA00080B201000000414380B20100000000F069
-:100DB000889401005A010044E0B10000B3010048EA
-:100DC00049C10000B101005B89900000B09F00A004
-:100DD0009EB000000000004D81B001000000004303
-:100DE000CB8301000000454081B20100BA01A2415D
-:100DF000815000000000454081B2010000004540E4
-:100E000081B20100C4019182823000000000008A9A
-:100E100080B00100B69F004080CE0100C301A64013
-:100E200081320000C401564081B20000000000532E
-:100E30006F930100F39F00526F9300000000004D7C
-:100E400081B0010000000042CD8301000000464057
-:100E500081B20100C701A24181500000000046405C
-:100E600081B201000000464081B20100D1019181B0
-:100E7000823000000000008980B00100B69F004071
-:100E800080CE0100D001A64081320000D101554042
-:100E900081B20000000000526F930100F39F0053E5
-:100EA0006F9300000000004083B001000014004078
-:100EB000499901000000234081B00100DA0122DEDF
-:100EC000E16D00000000004C49C10100000000413C
-:100ED00081C00100D501A244816C0000550100438E
-:100EE000BFB30000000000F818B10100000040F896
-:100EF00080B20100000041F080B20100000000401B
-:100F0000F1B1010000000040F1B101005A010040C0
-:100F1000E1B10000E201004091B00000000000419A
-:100F200091B00100D0142E4049B1010005000040ED
-:100F3000A39B0100080000DD81F40100E7010040EF
-:100F400080C801000000004010B10000ED01004029
-:100F500081B00000580100DEA1B30000FF01004095
-:100F600081B200000102004081B000000702004091
-:100F700081B20000570100DFE1B10000000000D0A5
-:100F8000BAB30100000000DEA1B10100020000D2EE
-:100F9000A5E70100000000D2C1B30100000000007D
-:100FA000F0B10100F7012244C1530000F601844171
-:100FB00081400000FA01004081320100000000D0B1
-:100FC00045B10100F1010041A1C10000B1020040A2
-:100FD00081320100C5020040813201005A0100DD6A
-:100FE000A1B100000000004081B0010040000040BD
-:100FF000A59B0100B102004081320100400000D3F6
-:10100000A7CB0100C50200E0A5B30000030000402B
-:10101000A39B0100580100DEA1B3000000000044C2
-:10102000BFB30100000000DE819001005501A2BAAB
-:1010300080040000600000DE619901000402A8B194
-:101040008030000057010040E0B10000000000D0F7
-:10105000BAB3010068020040819801005D02004DB2
-:101060008330010000000044E1B3010000000044AF
-:10107000E3B3010000000044E5B3010000000044B8
-:10108000E9B3010000000044EBB30100000000449C
-:10109000F5B3010000000044F7B301000000004474
-:1010A000F9B30100150222408F6F00007502004065
-:1010B000819801005D0200C7833001007D0200407D
-:1010C000819801005D02004283300100000000E8C9
-:1010D000F1B10100000000E9F1B10100000000EAF7
-:1010E000F1B10100000000EBF1B10100000000854A
-:1010F000F0B10100000000ECF1B10100000000EDD2
-:10110000F1B10100000000B2F0B10100E09F004029
-:101110008132010000000040F0B1010000000040F9
-:10112000F1B10100000000ABF0B10100000000B817
-:10113000F0B10100000000B9F0B10100000000BAF8
-:10114000F0B10100000000BBF0B101002902B8407D
-:101150008130000000000040819001002B02B94066
-:101160008132000000000041819001002D02BA4050
-:101170008132000000000042819001002F02BB403C
-:101180008132000000000043819001003102BC4028
-:101190008132000000000044819001003302BD4014
-:1011A0008132000000000045819001003502BE4000
-:1011B0008132000000000046819001003702BF40EC
-:1011C0008132000000000047819001003902C840D0
-:1011D0008132000000000048819001003B02C940BC
-:1011E0008132000000000049819001003D02CA40A8
-:1011F000813200000000004A819001003F02CB4094
-:10120000813200000000004B819001004102CC407F
-:10121000813200000000004C819001004302CD406B
-:10122000813200000000004D819001004502CE4057
-:10123000813200000000004E819001004702CF4043
-:10124000813200000000004F81900100000000404A
-:10125000F0B1010040000040A59B0100AF0200403A
-:1012600081320100C502004081320100D0142E06F7
-:10127000A5B30100400000D3A7CB0100000000F09F
-:10128000F1B10100000000F1F1B10100000000F235
-:10129000F1B10100000000F4F1B10100000000F51F
-:1012A000F1B10100000000FAF1B10100000000FB03
-:1012B000F1B10100000000FCF1B10100000000EB01
-:1012C000F1B10100000000EEF1B10100000000EFFB
-:1012D000F1B10100000000F3F1B10100000000F6DF
-:1012E000F1B10100000000FDF1B10100F70100C7FC
-:1012F000E1B100000000804081B2010063020048BB
-:1013000080320000000051401AB1010000004D4041
-:1013100081B201000000454081B201006002A2419B
-:10132000835000005C02494081B20000000052403E
-:101330001CB1010000004E4081B201000000464097
-:1013400081B201006502A241835000005C024A4064
-:1013500081B20000000000A09EB0010000000080EB
-:10136000D8B30100000000A1D0B30100000000A22A
-:10137000D2B30100000000A4D4B30100000000D0EB
-:10138000D6B30100000000D1DCB30100000000D2A0
-:10139000DEB3010000000088DAB30100000000D4D1
-:1013A0008EB30100000000D3E6B30100000000ACE2
-:1013B000ECB3010000000099FAB30100000000D571
-:1013C000E0B30100000000D5E2B30100000000D549
-:1013D000E4B30100000000D5E8B30100000000D52F
-:1013E000EAB30100000000D5F4B30100000000D50D
-:1013F000F6B30100000000D5F8B30100000000C7FB
-:10140000A9B101000000004F40B10100810200407D
-:1014100091B000000000004191B0010007000040C1
-:10142000A39B0100080000DD81F40100850200405B
-:1014300080C801000000004010B100008A02004096
-:1014400081B200009502004081B200009502004682
-:10145000A3B300009802004081B200009E02004049
-:1014600081B200008C022350A56F000000000050E4
-:10147000A5B30100BC020042A5630100C502004003
-:1014800081320100D0142D4049B10100000000D08C
-:10149000BAB30100000000DEA1B10100000000F8B5
-:1014A00000B0010094022244A553000091020041C3
-:1014B000A1C100005A0100DDA1B10000BC0200DEA4
-:1014C000A1330100C5020040813201005A010040F1
-:1014D00081B2000000000045BFB301005501A2D257
-:1014E000777D0000000000D261B10100000000DE45
-:1014F00063B101009B02A840813200005A01004004
-:1015000081B20000BC020054A5330100C5020040B6
-:1015100081320100D0142D4049B10100000000F8D3
-:10152000D0B30100000000F8D2B30100000000F8C1
-:10153000D4B30100000000F8D6B30100000000F8A9
-:1015400008B10100A9020040819801005D02004637
-:10155000833001005A01004081B20000000000A069
-:101560009EB00100000000E843B10100000000E966
-:1015700045B10100000000EA49B10100000000EBA4
-:10158000A1B101000000004F40B10100000000E7E0
-:10159000A7B30100000000D8A9B30100000000407B
-:1015A00049B10100AE0300CBA3C901000000002037
-:1015B00046B10100000000D2F1B10100000000D3EB
-:1015C000F1B10100000000D4F1B10100000000D031
-:1015D000E1B10100000000D161B101002000002054
-:1015E00062DD0100B902A84081320000000080CC19
-:1015F00085930100000000E7A7B30100000000D8B8
-:10160000A9B301000000004049B10100AE0300CBC6
-:10161000A3C901000000002046B10100000000D273
-:10162000F1B10100000000D0F1B10100000000D3D1
-:10163000F1B10100B80200D4E1B100000000A2CC79
-:1016400085FF00000000005081B00100C702A241E8
-:1016500081500000C602A2F280300000000080CC61
-:10166000858301000000004081B00100CB0280A50D
-:1016700080320000CC0200A5803200000000004152
-:1016800081C00100CD0280A58032000080010040B1
-:1016900083980100D602204F816C000000010040B9
-:1016A00083980100D602204B816C0000800000402E
-:1016B00083980100D6022047816C000000000040A2
-:1016C000839801000000004182DC0100039000418A
-:1016D000209901000000004049B1010000142F4C86
-:1016E00083B0010000000040F1B10100DA02A24124
-:1016F00083500000020000A580C80100DD02A2A501
-:10170000806C000020000090209901000000005F24
-:1017100023910100E0021F91803200003000009010
-:10172000209901000000005F23910100E3021F9156
-:10173000803200007000009020A901000000005FCE
-:1017400023910100E6021F91803200000000005F3B
-:1017500023910100E8021F91803200004068009050
-:1017600020A90100E0000040619901002100004033
-:1017700061990100220000406199010023000040AE
-:10178000619901002400004061990100250000409A
-:101790006199010026000040619901002700004086
-:1017A00061990100C000004061990100D01400401F
-:1017B00045990100020100A680B001000403004029
-:1017C00080980100060500A682B0010008070041CC
-:1017D0008298010000000040F0B1010000000041CB
-:1017E000E0B10100300300408530010039030040C2
-:1017F00081320100D814004043990100FF02A2F891
-:10180000806C0000000322F0826C000000000042A7
-:1018100021910100D0142040E1B101003003000CFF
-:10182000853001003003004D851001003003004E6B
-:1018300085100100D014204FE1B101003003004FAA
-:10184000851001003903000C85300100D8142043B5
-:1018500081B001000F0322F09E6E00003903004D9D
-:1018600085100100D814204281B001000F0322F03E
-:101870009E6E00003903004E85100100D8142041EF
-:1018800081B001001103A2F09E6E0000000000492B
-:1018900081E001000000004020950100030000905D
-:1018A000208D010000000043219501000000001B75
-:1018B00089B00100D0142040E1B1010030030017CD
-:1018C00085300100300300588510010030030059B5
-:1018D00085100100D014204FE1B101003003005AFF
-:1018E000851001003903001785300100D81420400D
-:1018F00081B00100230322F09E6E000039030058DE
-:1019000085100100D814204181B00100230322F08A
-:101910009E6E00003903005985100100D814204242
-:1019200081B001002703A2F09E6E0000030000902A
-:10193000208D0100000000402095010000000018EB
-:1019400089B001000000004088E001002F03A2429E
-:10195000217D0000A5A5004081980100D014204001
-:10196000E0B101003003004484300100390300403D
-:1019700081320100D814204081B201002F03A2F06F
-:10198000806C00000000004189E00100E000804020
-:10199000619901007015004047990100000000485E
-:1019A000F1B1010000000042F0B10100D01400408C
-:1019B000F19901000000005587B4010004000040C7
-:1019C0006199010070150043629901003603A84037
-:1019D000813200004103004081B2000070150040D8
-:1019E0004799010000000048F1B10100D8140040FF
-:1019F000F199010000000042F0B101000000005523
-:101A000087B4010002000040619901007015004395
-:101A1000629901003F03A8408132000000000048A5
-:101A200087B001004203A241875000000000A2F2EB
-:101A300086B00000100000F186F40100410326404A
-:101A4000813200000400004081B200000000004725
-:101A500084B001000000A248848400000000005F00
-:101A600061B101000000005C8F90010000000047A0
-:101A700062B101004903A84081320000F59F004790
-:101A800098300100000800478EC801004703005C41
-:101A90008F800000E00000406199010058152D4042
-:101AA0008DB00100D0142DF088B00100000000FAC4
-:101AB0008AB001000000004581B001000700004528
-:101AC00082880100000000438BF001000000004804
-:101AD00083E00100000000468294010020000041E4
-:101AE00060990100000000418DC001006403225F85
-:101AF0008D6C00005503A24181500000530300404B
-:101B000081B20000080000408598010000000044F8
-:101B100082B001000000004186B00100001C0043BB
-:101B200086D801000000A6418550010060030041F5
-:101B300083E000005E0300408132010000000048A5
-:101B400085E00100D0142F4684940100200000425B
-:101B500060990100C00000406199010000008040D0
-:101B600081B20100070000458088010000000043A9
-:101B70008BF0010000040040839801006F03A04136
-:101B8000815000006D03004182E8000000008041A8
-:101B90008EC00100AE030040A39901000000005474
-:101BA00081B00100601500408598010008000040E8
-:101BB00040E401000000005A419401000000005080
-:101BC00041E001000000004240940100000000419B
-:101BD00081C001000000A355816C0100000000419C
-:101BE000A3C101007303005085C000000000004045
-:101BF00049B1010000020040839801000016004036
-:101C00004599010000000040F1B101007E03A241AE
-:101C1000835000000000004085B001000B0000442C
-:101C200082F401001A1500A686B00100701500406C
-:101C30004599010000080040F199010000000042B0
-:101C4000F0B1010000160040E199010004000040DD
-:101C50006199010070150043629901008803A84052
-:101C6000813200008A03225A737D00007A0000400E
-:101C7000619901008B03A8B17E3100000008004289
-:101C800084C801008303A24183500000000080400B
-:101C900081B201000400004081B200000400004055
-:101CA00081B200000400004081B200000400004046
-:101CB00081B200000400004081B200000400004036
-:101CC00081B200000400004081B200000400004026
-:101CD00081B200000400004081B200000400004016
-:101CE00081B200000400004081B200000400004006
-:101CF00081B200000400004081B2000004000040F6
-:101D000081B200000400004081B2000004000040E5
-:101D100081B200000400004081B2000004000040D5
-:101D200081B200000400004081B2000004000040C5
-:101D300081B200000400004081B2000004000040B5
-:101D400081B200000400004081B2000004000040A5
-:101D500081B200000400004081B200000400004095
-:101D600081B200000400004081B200000400004085
-:101D700081B200000400004081B200000400004075
-:101D800081B200000400004081B200000400004065
-:101D900081B200000400004081B200000400004055
-:101DA00081B200000400004081B200000400004045
-:101DB00081B200000400004081B200000400004035
-:101DC00081B200000400004081B200000400004025
-:101DD00081B200000400004081B200000400004015
-:101DE00081B200000400004081B200000400004005
-:101DF00081B200000400004081B2000004000040F5
-:101E000081B200000400004081B2000004000040E4
-:101E100081B200000400004081B2000004000040D4
-:101E200081B200000400004081B2000004000040C4
-:101E300081B200000400004081B2000004000040B4
-:101E400081B200000400004081B2000004000040A4
-:101E500081B200000400004081B200000400004094
-:101E600081B200000400004081B200000400004084
-:101E700081B200000400004081B200000400004074
-:101E800081B200000400004081B200000400004064
-:101E900081B200000400004081B200000400004054
-:101EA00081B200000400004081B200000400004044
-:101EB00081B200000400004081B200000400004034
-:101EC00081B200000400004081B200000400004024
-:101ED00081B200000400004081B200000400004014
-:101EE00081B200000400004081B200000400004004
-:101EF00081B200000400004081B2000004000040F4
-:101F000081B200000400004081B2000004000040E3
-:101F100081B200000400004081B2000004000040D3
-:101F200081B200000400004081B2000004000040C3
-:101F300081B200000400004081B2000004000040B3
-:101F400081B200000400004081B2000004000040A3
-:101F500081B200000400004081B200000400004093
-:101F600081B200000400004081B200000400004083
-:101F700081B200000400004081B200000400004073
-:101F800081B200000400004081B200000400004063
-:101F900081B200000400004081B200000400004053
-:101FA00081B200000400004081B200000400004043
-:101FB00081B200000400004081B200000400004033
-:101FC00081B200000400004081B200000400004023
-:101FD00081B200000400004081B200000400004013
-:101FE00081B200000400004081B200000400004003
-:101FF00081B200000400004081B2000004000040F3
-:1020000081B200000400004081B2000004000040E2
-:1020100081B200000400004081B2000004000040D2
-:1020200081B200000400004081B2000004000040C2
-:1020300081B200000400004081B2000004000040B2
-:1020400081B200000400004081B2000004000040A2
-:1020500081B200000400004081B200000400004092
-:1020600081B200000400004081B200000400004082
-:1020700081B200000400004081B200000400004072
-:1020800081B200000400004081B200000400004062
-:1020900081B200000400004081B200000400004052
-:1020A00081B200000400004081B200000400004042
-:1020B00081B200000400004081B200000400004032
-:1020C00081B200000400004081B200000400004022
-:1020D00081B200000400004081B200000400004012
-:1020E00081B200000400004081B200000400004002
-:1020F00081B200000400004081B2000004000040F2
-:1021000081B200000400004081B2000004000040E1
-:1021100081B200000400004081B2000004000040D1
-:1021200081B200000400004081B2000004000040C1
-:1021300081B200000400004081B2000004000040B1
-:1021400081B200000400004081B2000004000040A1
-:1021500081B200000400004081B200000400004091
-:1021600081B200000400004081B200000400004081
-:1021700081B200000400004081B200000400004071
-:1021800081B200000400004081B200000400004061
-:1021900081B200000400004081B200000400004051
-:1021A00081B200000400004081B200000400004041
-:1021B00081B200000400004081B200000400004031
-:1021C00081B200000400004081B200000400004021
-:1021D00081B200000400004081B200000400004011
-:1021E00081B200000400004081B200000400004001
-:1021F00081B200000400004081B2000004000040F1
-:1022000081B200000400004081B2000004000040E0
-:1022100081B200000400004081B2000004000040D0
-:1022200081B200000400004081B2000004000040C0
-:1022300081B200000400004081B2000004000040B0
-:1022400081B200000400004081B2000004000040A0
-:1022500081B200000400004081B200000400004090
-:1022600081B200000400004081B200000400004080
-:1022700081B200000400004081B200000400004070
-:1022800081B200000400004081B200000400004060
-:1022900081B200000400004081B200000400004050
-:1022A00081B200000400004081B200000400004040
-:1022B00081B200000400004081B200000400004030
-:1022C00081B200000400004081B200000400004020
-:1022D00081B200000400004081B200000400004010
-:1022E00081B200000400004081B200000400004000
-:1022F00081B200000400004081B2000004000040F0
-:1023000081B200000400004081B2000004000040DF
-:1023100081B200000400004081B2000004000040CF
-:1023200081B200000400004081B2000004000040BF
-:1023300081B200000400004081B2000004000040AF
-:1023400081B200000400004081B20000040000409F
-:1023500081B200000400004081B20000040000408F
-:1023600081B200000400004081B20000040000407F
-:1023700081B200000400004081B20000040000406F
-:1023800081B200000400004081B20000040000405F
-:1023900081B200000400004081B20000040000404F
-:1023A00081B200000400004081B20000040000403F
-:1023B00081B200000400004081B20000040000402F
-:1023C00081B200000400004081B20000040000401F
-:1023D00081B200000400004081B20000040000400F
-:1023E00081B200000400004081B2000004000040FF
-:1023F00081B200000400004081B2000004000040EF
-:1024000081B200000400004081B2000004000040DE
-:1024100081B200000400004081B2000004000040CE
-:1024200081B200000400004081B2000004000040BE
-:1024300081B200000400004081B2000004000040AE
-:1024400081B200000400004081B20000040000409E
-:1024500081B200000400004081B20000040000408E
-:1024600081B200000400004081B20000040000407E
-:1024700081B200000400004081B20000040000406E
-:1024800081B200000400004081B20000040000405E
-:1024900081B200000400004081B20000040000404E
-:1024A00081B200000400004081B20000040000403E
-:1024B00081B200000400004081B20000040000402E
-:1024C00081B200000400004081B20000040000401E
-:1024D00081B200000400004081B20000040000400E
-:1024E00081B200000400004081B2000004000040FE
-:1024F00081B200000400004081B2000004000040EE
-:1025000081B200000400004081B2000004000040DD
-:1025100081B200000400004081B2000004000040CD
-:1025200081B200000400004081B2000004000040BD
-:1025300081B200000400004081B2000004000040AD
-:1025400081B200000400004081B20000040000409D
-:1025500081B200000400004081B20000040000408D
-:1025600081B200000400004081B20000040000407D
-:1025700081B200000400004081B20000040000406D
-:1025800081B200000400004081B20000040000405D
-:1025900081B200000400004081B20000040000404D
-:1025A00081B200000400004081B20000040000403D
-:1025B00081B200000400004081B20000040000402D
-:1025C00081B200000400004081B20000040000401D
-:1025D00081B200000400004081B20000040000400D
-:1025E00081B200000400004081B2000004000040FD
-:1025F00081B200000400004081B2000004000040ED
-:1026000081B200000400004081B2000004000040DC
-:1026100081B200000400004081B2000004000040CC
-:1026200081B200000400004081B2000004000040BC
-:1026300081B200000400004081B2000004000040AC
-:1026400081B200000400004081B20000040000409C
-:1026500081B200000400004081B20000040000408C
-:1026600081B200000400004081B20000040000407C
-:1026700081B200000400004081B20000040000406C
-:1026800081B200000400004081B20000040000405C
-:1026900081B200000400004081B20000040000404C
-:1026A00081B200000400004081B20000040000403C
-:1026B00081B200000400004081B20000040000402C
-:1026C00081B200000400004081B20000040000401C
-:1026D00081B200000400004081B20000040000400C
-:1026E00081B200000400004081B2000004000040FC
-:1026F00081B200000400004081B2000004000040EC
-:1027000081B200000400004081B2000004000040DB
-:1027100081B200000400004081B2000004000040CB
-:1027200081B200000400004081B2000004000040BB
-:1027300081B200000400004081B2000004000040AB
-:1027400081B200000400004081B20000040000409B
-:1027500081B200000400004081B20000040000408B
-:1027600081B200000400004081B20000040000407B
-:1027700081B200000400004081B20000040000406B
-:1027800081B200000400004081B20000040000405B
-:1027900081B200000400004081B20000040000404B
-:1027A00081B200000400004081B20000040000403B
-:1027B00081B200000400004081B20000040000402B
-:1027C00081B200000400004081B20000040000401B
-:1027D00081B200000400004081B20000040000400B
-:1027E00081B200000400004081B2000004000040FB
-:1027F00081B200000400004081B2000004000040EB
-:1028000081B200000400004081B2000004000040DA
-:1028100081B200000400004081B2000004000040CA
-:1028200081B200000400004081B2000004000040BA
-:1028300081B200000400004081B2000004000040AA
-:1028400081B200000400004081B20000040000409A
-:1028500081B200000400004081B20000040000408A
-:1028600081B200000400004081B20000040000407A
-:1028700081B200000400004081B20000040000406A
-:1028800081B200000400004081B20000040000405A
-:1028900081B200000400004081B20000040000404A
-:1028A00081B200000400004081B20000040000403A
-:1028B00081B200000400004081B20000040000402A
-:1028C00081B200000400004081B20000040000401A
-:1028D00081B200000400004081B20000040000400A
-:1028E00081B200000400004081B2000004000040FA
-:1028F00081B200000400004081B2000004000040EA
-:1029000081B200000400004081B2000004000040D9
-:1029100081B200000400004081B2000004000040C9
-:1029200081B200000400004081B2000004000040B9
-:1029300081B200000400004081B2000004000040A9
-:1029400081B200000400004081B200000400004099
-:1029500081B200000400004081B200000400004089
-:1029600081B200000400004081B200000400004079
-:1029700081B200000400004081B200000400004069
-:1029800081B200000400004081B200000400004059
-:1029900081B200000400004081B200000400004049
-:1029A00081B200000400004081B200000400004039
-:1029B00081B200000400004081B200000400004029
-:1029C00081B200000400004081B200000400004019
-:1029D00081B200000400004081B200000400004009
-:1029E00081B200000400004081B2000004000040F9
-:1029F00081B200000400004081B2000004000040E9
-:102A000081B200000400004081B2000004000040D8
-:102A100081B200000400004081B2000004000040C8
-:102A200081B200000400004081B2000004000040B8
-:102A300081B200000400004081B2000004000040A8
-:102A400081B200000400004081B200000400004098
-:102A500081B200000400004081B200000400004088
-:102A600081B200000400004081B200000400004078
-:102A700081B200000400004081B200000400004068
-:102A800081B200000400004081B200000400004058
-:102A900081B200000400004081B200000400004048
-:102AA00081B200000400004081B200000400004038
-:102AB00081B200000400004081B200000400004028
-:102AC00081B200000400004081B200000400004018
-:102AD00081B200000400004081B200000400004008
-:102AE00081B200000400004081B2000004000040F8
-:102AF00081B200000400004081B2000004000040E8
-:102B000081B200000400004081B2000004000040D7
-:102B100081B200000400004081B2000004000040C7
-:102B200081B200000400004081B2000004000040B7
-:102B300081B200000400004081B2000004000040A7
-:102B400081B200000400004081B200000400004097
-:102B500081B200000400004081B200000400004087
-:102B600081B200000400004081B200000400004077
-:102B700081B200000400004081B200000400004067
-:102B800081B200000400004081B200000400004057
-:102B900081B200000400004081B200000400004047
-:102BA00081B200000400004081B200000400004037
-:102BB00081B200000400004081B200000400004027
-:102BC00081B200000400004081B200000400004017
-:102BD00081B200000400004081B200000400004007
-:102BE00081B200000400004081B2000004000040F7
-:102BF00081B200000400004081B2000004000040E7
-:102C000081B200000400004081B2000004000040D6
-:102C100081B200000400004081B2000004000040C6
-:102C200081B200000400004081B2000004000040B6
-:102C300081B200000400004081B2000004000040A6
-:102C400081B200000400004081B200000400004096
-:102C500081B200000400004081B200000400004086
-:102C600081B200000400004081B200000400004076
-:102C700081B200000400004081B200000400004066
-:102C800081B200000400004081B200000400004056
-:102C900081B200000400004081B200000400004046
-:102CA00081B200000400004081B200000400004036
-:102CB00081B200000400004081B200000400004026
-:102CC00081B200000400004081B200000400004016
-:102CD00081B200000400004081B200000400004006
-:102CE00081B200000400004081B2000004000040F6
-:102CF00081B200000400004081B2000004000040E6
-:102D000081B200000400004081B2000004000040D5
-:102D100081B200000400004081B2000004000040C5
-:102D200081B200000400004081B2000004000040B5
-:102D300081B200000400004081B2000004000040A5
-:102D400081B200000400004081B200000400004095
-:102D500081B200000400004081B200000400004085
-:102D600081B200000400004081B200000400004075
-:102D700081B200000400004081B200000400004065
-:102D800081B200000400004081B200000400004055
-:102D900081B200000400004081B200000400004045
-:102DA00081B200000400004081B200000400004035
-:102DB00081B200000400004081B200000400004025
-:102DC00081B200000400004081B200000400004015
-:102DD00081B200000400004081B200000400004005
-:102DE00081B200000400004081B2000004000040F5
-:102DF00081B200000400004081B2000004000040E5
-:102E000081B200000400004081B2000004000040D4
-:102E100081B200000400004081B2000004000040C4
-:102E200081B200000400004081B2000004000040B4
-:102E300081B200000400004081B2000004000040A4
-:102E400081B200000400004081B200000400004094
-:102E500081B200000400004081B200000400004084
-:102E600081B200000400004081B200000400004074
-:102E700081B200000400004081B200000400004064
-:102E800081B200000400004081B200000400004054
-:102E900081B200000400004081B200000400004044
-:102EA00081B200000400004081B200000400004034
-:102EB00081B200000400004081B200000400004024
-:102EC00081B200000400004081B200000400004014
-:102ED00081B200000400004081B200000400004004
-:102EE00081B200000400004081B2000004000040F4
-:102EF00081B200000400004081B2000004000040E4
-:102F000081B200000400004081B2000004000040D3
-:102F100081B200000400004081B2000004000040C3
-:102F200081B200000400004081B2000004000040B3
-:102F300081B200000400004081B2000004000040A3
-:102F400081B200000400004081B200000400004093
-:102F500081B200000400004081B200000400004083
-:102F600081B200000400004081B200000400004073
-:102F700081B200000400004081B200000400004063
-:102F800081B200000400004081B200000400004053
-:102F900081B200000400004081B200000400004043
-:102FA00081B200000400004081B200000400004033
-:102FB00081B200000400004081B200000400004023
-:102FC00081B200000400004081B200000400004013
-:102FD00081B200000400004081B200000400004003
-:102FE00081B200000400004081B2000004000040F3
-:102FF00081B200000400004081B2000004000040E3
-:1030000081B200000400004081B2000004000040D2
-:1030100081B200000400004081B2000004000040C2
-:1030200081B200000400004081B2000004000040B2
-:1030300081B200000400004081B2000004000040A2
-:1030400081B200000400004081B200000400004092
-:1030500081B200000400004081B200000400004082
-:1030600081B200000400004081B200000400004072
-:1030700081B200000400004081B200000400004062
-:1030800081B200000400004081B200000400004052
-:1030900081B200000400004081B200000400004042
-:1030A00081B200000400004081B200000400004032
-:1030B00081B200000400004081B200000400004022
-:1030C00081B200000400004081B200000400004012
-:1030D00081B200000400004081B200000400004002
-:1030E00081B200000400004081B2000004000040F2
-:1030F00081B200000400004081B2000004000040E2
-:1031000081B200000400004081B2000004000040D1
-:1031100081B200000400004081B2000004000040C1
-:1031200081B200000400004081B2000004000040B1
-:1031300081B200000400004081B2000004000040A1
-:1031400081B200000400004081B200000400004091
-:1031500081B200000400004081B200000400004081
-:1031600081B200000400004081B200000400004071
-:1031700081B200000400004081B200000400004061
-:1031800081B200000400004081B200000400004051
-:1031900081B200000400004081B200000400004041
-:1031A00081B200000400004081B200000400004031
-:1031B00081B200000400004081B200000400004021
-:1031C00081B200000400004081B200000400004011
-:1031D00081B200000400004081B200000400004001
-:1031E00081B200000400004081B2000004000040F1
-:1031F00081B200000400004081B2000004000040E1
-:1032000081B200000400004081B2000004000040D0
-:1032100081B200000400004081B2000004000040C0
-:1032200081B200000400004081B2000004000040B0
-:1032300081B200000400004081B2000004000040A0
-:1032400081B200000400004081B200000400004090
-:1032500081B200000400004081B200000400004080
-:1032600081B200000400004081B200000400004070
-:1032700081B200000400004081B200000400004060
-:1032800081B200000400004081B200000400004050
-:1032900081B200000400004081B200000400004040
-:1032A00081B200000400004081B200000400004030
-:1032B00081B200000400004081B200000400004020
-:1032C00081B200000400004081B200000400004010
-:1032D00081B200000400004081B200000400004000
-:1032E00081B200000400004081B2000004000040F0
-:1032F00081B200000400004081B2000004000040E0
-:1033000081B200000400004081B2000004000040CF
-:1033100081B200000400004081B2000004000040BF
-:1033200081B200000400004081B2000004000040AF
-:1033300081B200000400004081B20000040000409F
-:1033400081B200000400004081B20000040000408F
-:1033500081B200000400004081B20000040000407F
-:1033600081B200000400004081B20000040000406F
-:1033700081B200000400004081B20000040000405F
-:1033800081B200000400004081B20000040000404F
-:1033900081B200000400004081B20000040000403F
-:1033A00081B200000400004081B20000040000402F
-:1033B00081B200000400004081B20000040000401F
-:1033C00081B200000400004081B20000040000400F
-:1033D00081B200000400004081B2000004000040FF
-:1033E00081B200000400004081B2000004000040EF
-:1033F00081B200000400004081B2000004000040DF
-:1034000081B200000400004081B2000004000040CE
-:1034100081B200000400004081B2000004000040BE
-:1034200081B200000400004081B2000004000040AE
-:1034300081B200000400004081B20000040000409E
-:1034400081B200000400004081B20000040000408E
-:1034500081B200000400004081B20000040000407E
-:1034600081B200000400004081B20000040000406E
-:1034700081B200000400004081B20000040000405E
-:1034800081B200000400004081B20000040000404E
-:1034900081B200000400004081B20000040000403E
-:1034A00081B200000400004081B20000040000402E
-:1034B00081B200000400004081B20000040000401E
-:1034C00081B200000400004081B20000040000400E
-:1034D00081B200000400004081B2000004000040FE
-:1034E00081B200000400004081B2000004000040EE
-:1034F00081B200000400004081B2000004000040DE
-:1035000081B200000400004081B2000004000040CD
-:1035100081B200000400004081B2000004000040BD
-:1035200081B200000400004081B2000004000040AD
-:1035300081B200000400004081B20000040000409D
-:1035400081B200000400004081B20000040000408D
-:1035500081B200000400004081B20000040000407D
-:1035600081B200000400004081B20000040000406D
-:1035700081B200000400004081B20000040000405D
-:1035800081B200000400004081B20000040000404D
-:1035900081B200000400004081B20000040000403D
-:1035A00081B200000400004081B20000040000402D
-:1035B00081B200000400004081B20000040000401D
-:1035C00081B200000400004081B20000040000400D
-:1035D00081B200000400004081B2000004000040FD
-:1035E00081B200000400004081B2000004000040ED
-:1035F00081B200000400004081B2000004000040DD
-:1036000081B200000400004081B2000004000040CC
-:1036100081B200000400004081B2000004000040BC
-:1036200081B200000400004081B2000004000040AC
-:1036300081B200000400004081B20000040000409C
-:1036400081B200000400004081B20000040000408C
-:1036500081B200000400004081B20000040000407C
-:1036600081B200000400004081B20000040000406C
-:1036700081B200000400004081B20000040000405C
-:1036800081B200000400004081B20000040000404C
-:1036900081B200000400004081B20000040000403C
-:1036A00081B200000400004081B20000040000402C
-:1036B00081B200000400004081B20000040000401C
-:1036C00081B200000400004081B20000040000400C
-:1036D00081B200000400004081B2000004000040FC
-:1036E00081B200000400004081B2000004000040EC
-:1036F00081B200000400004081B2000004000040DC
-:1037000081B200000400004081B2000004000040CB
-:1037100081B200000400004081B2000004000040BB
-:1037200081B200000400004081B2000004000040AB
-:1037300081B200000400004081B20000040000409B
-:1037400081B200000400004081B20000040000408B
-:1037500081B200000400004081B20000040000407B
-:1037600081B200000400004081B20000040000406B
-:1037700081B200000400004081B20000040000405B
-:1037800081B200000400004081B20000040000404B
-:1037900081B200000400004081B20000040000403B
-:1037A00081B200000400004081B20000040000402B
-:1037B00081B200000400004081B20000040000401B
-:1037C00081B200000400004081B20000040000400B
-:1037D00081B200000400004081B2000004000040FB
-:1037E00081B200000400004081B2000004000040EB
-:1037F00081B200000400004081B2000004000040DB
-:1038000081B200000400004081B2000004000040CA
-:1038100081B200000400004081B2000004000040BA
-:1038200081B200000400004081B2000004000040AA
-:1038300081B200000400004081B20000040000409A
-:1038400081B200000400004081B20000040000408A
-:1038500081B200000400004081B20000040000407A
-:1038600081B200000400004081B20000040000406A
-:1038700081B200000400004081B20000040000405A
-:1038800081B200000400004081B20000040000404A
-:1038900081B200000400004081B20000040000403A
-:1038A00081B200000400004081B20000040000402A
-:1038B00081B200000400004081B20000040000401A
-:1038C00081B200000400004081B20000040000400A
-:1038D00081B200000400004081B2000004000040FA
-:1038E00081B200000400004081B2000004000040EA
-:1038F00081B200000400004081B2000004000040DA
-:1039000081B200000400004081B2000004000040C9
-:1039100081B200000400004081B2000004000040B9
-:1039200081B200000400004081B2000004000040A9
-:1039300081B200000400004081B200000400004099
-:1039400081B200000400004081B200000400004089
-:1039500081B200000400004081B200000400004079
-:1039600081B200000400004081B200000400004069
-:1039700081B200000400004081B200000400004059
-:1039800081B200000400004081B200000400004049
-:1039900081B200000400004081B200000400004039
-:1039A00081B200000400004081B200000400004029
-:1039B00081B200000400004081B200000400004019
-:1039C00081B200000400004081B200000400004009
-:1039D00081B200000400004081B2000004000040F9
-:1039E00081B200000400004081B2000004000040E9
-:1039F00081B200000400004081B2000004000040D9
-:103A000081B200000400004081B2000004000040C8
-:103A100081B200000400004081B2000004000040B8
-:103A200081B200000400004081B2000004000040A8
-:103A300081B200000400004081B200000400004098
-:103A400081B200000400004081B200000400004088
-:103A500081B200000400004081B200000400004078
-:103A600081B200000400004081B200000400004068
-:103A700081B200000400004081B200000400004058
-:103A800081B200000400004081B200000400004048
-:103A900081B200000400004081B200000400004038
-:103AA00081B200000400004081B200000400004028
-:103AB00081B200000400004081B200000400004018
-:103AC00081B200000400004081B200000400004008
-:103AD00081B200000400004081B2000004000040F8
-:103AE00081B200000400004081B2000004000040E8
-:103AF00081B200000400004081B2000004000040D8
-:103B000081B200000400004081B2000004000040C7
-:103B100081B200000400004081B2000004000040B7
-:103B200081B200000400004081B2000004000040A7
-:103B300081B200000400004081B200000400004097
-:103B400081B200000400004081B200000400004087
-:103B500081B200000400004081B200000400004077
-:103B600081B200000400004081B200000400004067
-:103B700081B200000400004081B200000400004057
-:103B800081B200000400004081B200000400004047
-:103B900081B200000400004081B200000400004037
-:103BA00081B200000400004081B200000400004027
-:103BB00081B200000400004081B200000400004017
-:103BC00081B200000400004081B200000400004007
-:103BD00081B200000400004081B2000004000040F7
-:103BE00081B200000400004081B2000004000040E7
-:103BF00081B200000400004081B2000004000040D7
-:103C000081B200000400004081B2000004000040C6
-:103C100081B200000400004081B2000004000040B6
-:103C200081B200000400004081B2000004000040A6
-:103C300081B200000400004081B200000400004096
-:103C400081B200000400004081B200000400004086
-:103C500081B200000400004081B200000400004076
-:103C600081B200000400004081B200000400004066
-:103C700081B200000400004081B200000400004056
-:103C800081B200000400004081B200000400004046
-:103C900081B200000400004081B200000400004036
-:103CA00081B200000400004081B200000400004026
-:103CB00081B200000400004081B200000400004016
-:103CC00081B200000400004081B200000400004006
-:103CD00081B200000400004081B2000004000040F6
-:103CE00081B200000400004081B2000004000040E6
-:103CF00081B200000400004081B2000004000040D6
-:103D000081B200000400004081B2000004000040C5
-:103D100081B200000400004081B2000004000040B5
-:103D200081B200000400004081B2000004000040A5
-:103D300081B200000400004081B200000400004095
-:103D400081B200000400004081B200000400004085
-:103D500081B200000400004081B200000400004075
-:103D600081B200000400004081B200000400004065
-:103D700081B200000400004081B200000400004055
-:103D800081B200000400004081B200000400004045
-:103D900081B200000400004081B200000400004035
-:103DA00081B200000400004081B200000400004025
-:103DB00081B200000400004081B200000400004015
-:103DC00081B200000400004081B200000400004005
-:103DD00081B200000400004081B2000004000040F5
-:103DE00081B200000400004081B2000004000040E5
-:103DF00081B200000400004081B2000004000040D5
-:103E000081B200000400004081B2000004000040C4
-:103E100081B200000400004081B2000004000040B4
-:103E200081B200000400004081B2000004000040A4
-:103E300081B200000400004081B200000400004094
-:103E400081B200000400004081B200000400004084
-:103E500081B200000400004081B200000400004074
-:103E600081B200000400004081B200000400004064
-:103E700081B200000400004081B200000400004054
-:103E800081B200000400004081B200000400004044
-:103E900081B200000400004081B200000400004034
-:103EA00081B200000400004081B200000400004024
-:103EB00081B200000400004081B200000400004014
-:103EC00081B200000400004081B200000400004004
-:103ED00081B200000400004081B2000004000040F4
-:103EE00081B200000400004081B2000004000040E4
-:103EF00081B200000400004081B2000004000040D4
-:103F000081B200000400004081B2000004000040C3
-:103F100081B200000400004081B2000004000040B3
-:103F200081B200000400004081B2000004000040A3
-:103F300081B200000400004081B200000400004093
-:103F400081B200000400004081B200000400004083
-:103F500081B200000400004081B200000400004073
-:103F600081B200000400004081B200000400004063
-:103F700081B200000400004081B200000400004053
-:103F800081B200000400004081B200000400004043
-:103F900081B200000400004081B200000400004033
-:103FA00081B200000400004081B200000400004023
-:103FB00081B200000400004081B200000400004013
-:103FC00081B200000400004081B200000400004003
-:103FD00081B200000400004081B2000004000040F3
-:103FE00081B200000400004081B2000004000040E3
-:103FF00081B200000400004081B2000004000040D3
-:1040000081B200000400004081B2000004000040C2
-:1040100081B200000400004081B2000004000040B2
-:1040200081B200000400004081B2000004000040A2
-:1040300081B200000400004081B200000400004092
-:1040400081B200000400004081B200000400004082
-:1040500081B200000400004081B200000400004072
-:1040600081B200000400004081B200000400004062
-:1040700081B200000400004081B200000400004052
-:1040800081B200000400004081B200000400004042
-:1040900081B200000400004081B200000400004032
-:1040A00081B200000400004081B200000400004022
-:1040B00081B200000400004081B200000400004012
-:1040C00081B200000400004081B200000400004002
-:1040D00081B200000400004081B2000004000040F2
-:1040E00081B200000400004081B2000004000040E2
-:1040F00081B200000400004081B2000004000040D2
-:1041000081B200000400004081B2000004000040C1
-:1041100081B200000400004081B2000004000040B1
-:1041200081B200000400004081B2000004000040A1
-:1041300081B200000400004081B200000400004091
-:1041400081B200000400004081B200000400004081
-:1041500081B200000400004081B200000400004071
-:1041600081B200000400004081B200000400004061
-:1041700081B200000400004081B200000400004051
-:1041800081B200000400004081B200000400004041
-:1041900081B200000400004081B200000400004031
-:1041A00081B200000400004081B200000400004021
-:1041B00081B200000400004081B200000400004011
-:1041C00081B200000400004081B200000400004001
-:1041D00081B200000400004081B2000004000040F1
-:1041E00081B200000400004081B2000004000040E1
-:1041F00081B200000400004081B2000004000040D1
-:1042000081B200000400004081B2000004000040C0
-:1042100081B200000400004081B2000004000040B0
-:1042200081B200000400004081B2000004000040A0
-:1042300081B200000400004081B200000400004090
-:1042400081B200000400004081B200000400004080
-:1042500081B200000400004081B200000400004070
-:1042600081B200000400004081B200000400004060
-:1042700081B200000400004081B200000400004050
-:1042800081B200000400004081B200000400004040
-:1042900081B200000400004081B200000400004030
-:1042A00081B200000400004081B200000400004020
-:1042B00081B200000400004081B200000400004010
-:1042C00081B200000400004081B200000400004000
-:1042D00081B200000400004081B2000004000040F0
-:1042E00081B200000400004081B2000004000040E0
-:1042F00081B200000400004081B2000004000040D0
-:1043000081B200000400004081B2000004000040BF
-:1043100081B200000400004081B2000004000040AF
-:1043200081B200000400004081B20000040000409F
-:1043300081B200000400004081B20000040000408F
-:1043400081B200000400004081B20000040000407F
-:1043500081B200000400004081B20000040000406F
-:1043600081B200000400004081B20000040000405F
-:1043700081B200000400004081B20000040000404F
-:1043800081B200000400004081B20000040000403F
-:1043900081B200000400004081B20000040000402F
-:1043A00081B200000400004081B20000040000401F
-:1043B00081B200000400004081B20000040000400F
-:1043C00081B200000400004081B2000004000040FF
-:1043D00081B200000400004081B2000004000040EF
-:1043E00081B200000400004081B2000004000040DF
-:1043F00081B200000400004081B2000004000040CF
-:1044000081B200000400004081B2000004000040BE
-:1044100081B200000400004081B2000004000040AE
-:1044200081B200000400004081B20000040000409E
-:1044300081B200000400004081B20000040000408E
-:1044400081B200000400004081B20000040000407E
-:1044500081B200000400004081B20000040000406E
-:1044600081B200000400004081B20000040000405E
-:1044700081B200000400004081B20000040000404E
-:1044800081B200000400004081B20000040000403E
-:1044900081B200000400004081B20000040000402E
-:1044A00081B200000400004081B20000040000401E
-:1044B00081B200000400004081B20000040000400E
-:1044C00081B200000400004081B2000004000040FE
-:1044D00081B200000400004081B2000004000040EE
-:1044E00081B200000400004081B2000004000040DE
-:1044F00081B200000400004081B2000004000040CE
-:1045000081B200000400004081B2000004000040BD
-:1045100081B200000400004081B2000004000040AD
-:1045200081B200000400004081B20000040000409D
-:1045300081B200000400004081B20000040000408D
-:1045400081B200000400004081B20000040000407D
-:1045500081B200000400004081B20000040000406D
-:1045600081B200000400004081B20000040000405D
-:1045700081B200000400004081B20000040000404D
-:1045800081B200000400004081B20000040000403D
-:1045900081B200000400004081B20000040000402D
-:1045A00081B200000400004081B20000040000401D
-:1045B00081B200000400004081B20000040000400D
-:1045C00081B200000400004081B2000004000040FD
-:1045D00081B200000400004081B2000004000040ED
-:1045E00081B200000400004081B2000004000040DD
-:1045F00081B200000400004081B2000004000040CD
-:1046000081B200000400004081B2000004000040BC
-:1046100081B200000400004081B2000004000040AC
-:1046200081B200000400004081B20000040000409C
-:1046300081B200000400004081B20000040000408C
-:1046400081B200000400004081B20000040000407C
-:1046500081B200000400004081B20000040000406C
-:1046600081B200000400004081B20000040000405C
-:1046700081B200000400004081B20000040000404C
-:1046800081B200000400004081B20000040000403C
-:1046900081B200000400004081B20000040000402C
-:1046A00081B200000400004081B20000040000401C
-:1046B00081B200000400004081B20000040000400C
-:1046C00081B200000400004081B2000004000040FC
-:1046D00081B200000400004081B2000004000040EC
-:1046E00081B200000400004081B2000004000040DC
-:1046F00081B200000400004081B2000004000040CC
-:1047000081B200000400004081B2000004000040BB
-:1047100081B200000400004081B2000004000040AB
-:1047200081B200000400004081B20000040000409B
-:1047300081B200000400004081B20000040000408B
-:1047400081B200000400004081B20000040000407B
-:1047500081B200000400004081B20000040000406B
-:1047600081B200000400004081B20000040000405B
-:1047700081B200000400004081B20000040000404B
-:1047800081B200000400004081B20000040000403B
-:1047900081B200000400004081B20000040000402B
-:1047A00081B200000400004081B20000040000401B
-:1047B00081B200000400004081B20000040000400B
-:1047C00081B200000400004081B2000004000040FB
-:1047D00081B200000400004081B2000004000040EB
-:1047E00081B200000400004081B2000004000040DB
-:1047F00081B200000400004081B2000004000040CB
-:1048000081B200000400004081B2000004000040BA
-:1048100081B200000400004081B2000004000040AA
-:1048200081B200000400004081B20000040000409A
-:1048300081B200000400004081B20000040000408A
-:1048400081B200000400004081B20000040000407A
-:1048500081B200000400004081B20000040000406A
-:1048600081B200000400004081B20000040000405A
-:1048700081B200000400004081B20000040000404A
-:1048800081B200000400004081B20000040000403A
-:1048900081B200000400004081B20000040000402A
-:1048A00081B200000400004081B20000040000401A
-:1048B00081B200000400004081B20000040000400A
-:1048C00081B200000400004081B2000004000040FA
-:1048D00081B200000400004081B2000004000040EA
-:1048E00081B200000400004081B2000004000040DA
-:1048F00081B200000400004081B2000004000040CA
-:1049000081B200000400004081B2000004000040B9
-:1049100081B200000400004081B2000004000040A9
-:1049200081B200000400004081B200000400004099
-:1049300081B200000400004081B200000400004089
-:1049400081B200000400004081B200000400004079
-:1049500081B200000400004081B200000400004069
-:1049600081B200000400004081B200000400004059
-:1049700081B200000400004081B200000400004049
-:1049800081B200000400004081B200000400004039
-:1049900081B200000400004081B200000400004029
-:1049A00081B200000400004081B200000400004019
-:1049B00081B200000400004081B200000400004009
-:1049C00081B200000400004081B2000004000040F9
-:1049D00081B200000400004081B2000004000040E9
-:1049E00081B200000400004081B2000004000040D9
-:1049F00081B200000400004081B2000004000040C9
-:104A000081B200000400004081B2000004000040B8
-:104A100081B200000400004081B2000004000040A8
-:104A200081B200000400004081B200000400004098
-:104A300081B200000400004081B200000400004088
-:104A400081B200000400004081B200000400004078
-:104A500081B200000400004081B200000400004068
-:104A600081B200000400004081B200000400004058
-:104A700081B200000400004081B200000400004048
-:104A800081B200000400004081B200000400004038
-:104A900081B200000400004081B200000400004028
-:104AA00081B200000400004081B200000400004018
-:104AB00081B200000400004081B200000400004008
-:104AC00081B200000400004081B2000004000040F8
-:104AD00081B200000400004081B2000004000040E8
-:104AE00081B200000400004081B2000004000040D8
-:104AF00081B200000400004081B2000004000040C8
-:104B000081B200000400004081B2000004000040B7
-:104B100081B200000400004081B2000004000040A7
-:104B200081B200000400004081B200000400004097
-:104B300081B200000400004081B200000400004087
-:104B400081B200000400004081B200000400004077
-:104B500081B200000400004081B200000400004067
-:104B600081B200000400004081B200000400004057
-:104B700081B200000400004081B200000400004047
-:104B800081B200000400004081B200000400004037
-:104B900081B200000400004081B200000400004027
-:104BA00081B200000400004081B200000400004017
-:104BB00081B200000400004081B200000400004007
-:104BC00081B200000400004081B2000004000040F7
-:104BD00081B200000400004081B2000004000040E7
-:104BE00081B200000400004081B2000004000040D7
-:104BF00081B200000400004081B2000004000040C7
-:104C000081B200000400004081B2000004000040B6
-:104C100081B200000400004081B2000004000040A6
-:104C200081B200000400004081B200000400004096
-:104C300081B200000400004081B200000400004086
-:104C400081B200000400004081B200000400004076
-:104C500081B200000400004081B200000400004066
-:104C600081B200000400004081B200000400004056
-:104C700081B200000400004081B200000400004046
-:104C800081B200000400004081B200000400004036
-:104C900081B200000400004081B200000400004026
-:104CA00081B200000400004081B200000400004016
-:104CB00081B200000400004081B200000400004006
-:104CC00081B200000400004081B2000004000040F6
-:104CD00081B200000400004081B2000004000040E6
-:104CE00081B200000400004081B2000004000040D6
-:104CF00081B200000400004081B2000004000040C6
-:104D000081B200000400004081B2000004000040B5
-:104D100081B200000400004081B2000004000040A5
-:104D200081B200000400004081B200000400004095
-:104D300081B200000400004081B200000400004085
-:104D400081B200000400004081B200000400004075
-:104D500081B200000400004081B200000400004065
-:104D600081B200000400004081B200000400004055
-:104D700081B200000400004081B200000400004045
-:104D800081B200000400004081B200000400004035
-:104D900081B200000400004081B200000400004025
-:104DA00081B200000400004081B200000400004015
-:104DB00081B200000400004081B200000400004005
-:104DC00081B200000400004081B2000004000040F5
-:104DD00081B200000400004081B2000004000040E5
-:104DE00081B200000400004081B2000004000040D5
-:104DF00081B200000400004081B2000004000040C5
-:104E000081B200000400004081B2000004000040B4
-:104E100081B200000400004081B2000004000040A4
-:104E200081B200000400004081B200000400004094
-:104E300081B200000400004081B200000400004084
-:104E400081B200000400004081B200000400004074
-:104E500081B200000400004081B200000400004064
-:104E600081B200000400004081B200000400004054
-:104E700081B200000400004081B200000400004044
-:104E800081B200000400004081B200000400004034
-:104E900081B200000400004081B200000400004024
-:104EA00081B200000400004081B200000400004014
-:104EB00081B200000400004081B200000400004004
-:104EC00081B200000400004081B2000004000040F4
-:104ED00081B200000400004081B2000004000040E4
-:104EE00081B200000400004081B2000004000040D4
-:104EF00081B200000400004081B2000004000040C4
-:104F000081B200000400004081B2000004000040B3
-:104F100081B200000400004081B2000004000040A3
-:104F200081B200000400004081B200000400004093
-:104F300081B200000400004081B200000400004083
-:104F400081B200000400004081B200000400004073
-:104F500081B200000400004081B200000400004063
-:104F600081B200000400004081B200000400004053
-:104F700081B200000400004081B200000400004043
-:104F800081B200000400004081B200000400004033
-:104F900081B200000400004081B200000400004023
-:104FA00081B200000400004081B200000400004013
-:104FB00081B200000400004081B200000400004003
-:104FC00081B200000400004081B2000004000040F3
-:104FD00081B200000400004081B2000004000040E3
-:104FE00081B200000400004081B2000004000040D3
-:104FF00081B200000400004081B2000004000040C3
-:1050000081B200000400004081B2000004000040B2
-:1050100081B200000400004081B2000004000040A2
-:1050200081B200000400004081B200000400004092
-:1050300081B200000400004081B200000400004082
-:1050400081B200000400004081B200000400004072
-:1050500081B200000400004081B200000400004062
-:1050600081B200000400004081B200000400004052
-:1050700081B200000400004081B200000400004042
-:1050800081B200000400004081B200000400004032
-:1050900081B200000400004081B200000400004022
-:1050A00081B200000400004081B200000400004012
-:1050B00081B200000400004081B200000400004002
-:1050C00081B200000400004081B2000004000040F2
-:1050D00081B200000400004081B2000004000040E2
-:1050E00081B200000400004081B2000004000040D2
-:1050F00081B200000400004081B2000004000040C2
-:1051000081B200000400004081B2000004000040B1
-:1051100081B200000400004081B2000004000040A1
-:1051200081B200000400004081B200000400004091
-:1051300081B200000400004081B200000400004081
-:1051400081B200000400004081B200000400004071
-:1051500081B200000400004081B200000400004061
-:1051600081B200000400004081B200000400004051
-:1051700081B200000400004081B200000400004041
-:1051800081B200000400004081B200000400004031
-:1051900081B200000400004081B200000400004021
-:1051A00081B200000400004081B200000400004011
-:1051B00081B200000400004081B200000400004001
-:1051C00081B200000400004081B2000004000040F1
-:1051D00081B200000400004081B2000004000040E1
-:1051E00081B200000400004081B2000004000040D1
-:1051F00081B200000400004081B2000004000040C1
-:1052000081B200000400004081B2000004000040B0
-:1052100081B200000400004081B2000004000040A0
-:1052200081B200000400004081B200000400004090
-:1052300081B200000400004081B200000400004080
-:1052400081B200000400004081B200000400004070
-:1052500081B200000400004081B200000400004060
-:1052600081B200000400004081B200000400004050
-:1052700081B200000400004081B200000400004040
-:1052800081B200000400004081B200000400004030
-:1052900081B200000400004081B200000400004020
-:1052A00081B200000400004081B200000400004010
-:1052B00081B200000400004081B200000400004000
-:1052C00081B200000400004081B2000004000040F0
-:1052D00081B200000400004081B2000004000040E0
-:1052E00081B200000400004081B2000004000040D0
-:1052F00081B200000400004081B2000004000040C0
-:1053000081B200000400004081B2000004000040AF
-:1053100081B200000400004081B20000040000409F
-:1053200081B200000400004081B20000040000408F
-:1053300081B200000400004081B20000040000407F
-:1053400081B200000400004081B20000040000406F
-:1053500081B200000400004081B20000040000405F
-:1053600081B200000400004081B20000040000404F
-:1053700081B200000400004081B20000040000403F
-:1053800081B200000400004081B20000040000402F
-:1053900081B200000400004081B20000040000401F
-:1053A00081B200000400004081B20000040000400F
-:1053B00081B200000400004081B2000004000040FF
-:1053C00081B200000400004081B2000004000040EF
-:1053D00081B200000400004081B2000004000040DF
-:1053E00081B200000400004081B2000004000040CF
-:1053F00081B200000400004081B2000004000040BF
-:1054000081B200000400004081B2000004000040AE
-:1054100081B200000400004081B20000040000409E
-:1054200081B200000400004081B20000040000408E
-:1054300081B200000400004081B20000040000407E
-:1054400081B200000400004081B20000040000406E
-:1054500081B200000400004081B20000040000405E
-:1054600081B200000400004081B20000040000404E
-:1054700081B200000400004081B20000040000403E
-:1054800081B200000400004081B20000040000402E
-:1054900081B200000400004081B20000040000401E
-:1054A00081B200000400004081B20000040000400E
-:1054B00081B200000400004081B2000004000040FE
-:1054C00081B200000400004081B2000004000040EE
-:1054D00081B200000400004081B2000004000040DE
-:1054E00081B200000400004081B2000004000040CE
-:1054F00081B200000400004081B2000004000040BE
-:1055000081B200000400004081B2000004000040AD
-:1055100081B200000400004081B20000040000409D
-:1055200081B200000400004081B20000040000408D
-:1055300081B200000400004081B20000040000407D
-:1055400081B200000400004081B20000040000406D
-:1055500081B200000400004081B20000040000405D
-:1055600081B200000400004081B20000040000404D
-:1055700081B200000400004081B20000040000403D
-:1055800081B200000400004081B20000040000402D
-:1055900081B200000400004081B20000040000401D
-:1055A00081B200000400004081B20000040000400D
-:1055B00081B200000400004081B2000004000040FD
-:1055C00081B200000400004081B2000004000040ED
-:1055D00081B200000400004081B2000004000040DD
-:1055E00081B200000400004081B2000004000040CD
-:1055F00081B200000400004081B2000004000040BD
-:1056000081B200000400004081B2000004000040AC
-:1056100081B200000400004081B20000040000409C
-:1056200081B200000400004081B20000040000408C
-:1056300081B200000400004081B20000040000407C
-:1056400081B200000400004081B20000040000406C
-:1056500081B200000400004081B20000040000405C
-:1056600081B200000400004081B20000040000404C
-:1056700081B200000400004081B20000040000403C
-:1056800081B200000400004081B20000040000402C
-:1056900081B200000400004081B20000040000401C
-:1056A00081B200000400004081B20000040000400C
-:1056B00081B200000400004081B2000004000040FC
-:1056C00081B200000400004081B2000004000040EC
-:1056D00081B200000400004081B2000004000040DC
-:1056E00081B200000400004081B2000004000040CC
-:1056F00081B200000400004081B2000004000040BC
-:1057000081B200000400004081B2000004000040AB
-:1057100081B200000400004081B20000040000409B
-:1057200081B200000400004081B20000040000408B
-:1057300081B200000400004081B20000040000407B
-:1057400081B200000400004081B20000040000406B
-:1057500081B200000400004081B20000040000405B
-:1057600081B200000400004081B20000040000404B
-:1057700081B200000400004081B20000040000403B
-:1057800081B200000400004081B20000040000402B
-:1057900081B200000400004081B20000040000401B
-:1057A00081B200000400004081B20000040000400B
-:1057B00081B200000400004081B2000004000040FB
-:1057C00081B200000400004081B2000004000040EB
-:1057D00081B200000400004081B2000004000040DB
-:1057E00081B200000400004081B2000004000040CB
-:1057F00081B200000400004081B2000004000040BB
-:1058000081B200000400004081B2000004000040AA
-:1058100081B200000400004081B20000040000409A
-:1058200081B200000400004081B20000040000408A
-:1058300081B200000400004081B20000040000407A
-:1058400081B200000400004081B20000040000406A
-:1058500081B200000400004081B20000040000405A
-:1058600081B200000400004081B20000040000404A
-:1058700081B200000400004081B20000040000403A
-:1058800081B200000400004081B20000040000402A
-:1058900081B200000400004081B20000040000401A
-:1058A00081B200000400004081B20000040000400A
-:1058B00081B200000400004081B2000004000040FA
-:1058C00081B200000400004081B2000004000040EA
-:1058D00081B200000400004081B2000004000040DA
-:1058E00081B200000400004081B2000004000040CA
-:1058F00081B200000400004081B2000004000040BA
-:1059000081B200000400004081B2000004000040A9
-:1059100081B200000400004081B200000400004099
-:1059200081B200000400004081B200000400004089
-:1059300081B200000400004081B200000400004079
-:1059400081B200000400004081B200000400004069
-:1059500081B200000400004081B200000400004059
-:1059600081B200000400004081B200000400004049
-:1059700081B200000400004081B200000400004039
-:1059800081B200000400004081B200000400004029
-:1059900081B200000400004081B200000400004019
-:1059A00081B200000400004081B200000400004009
-:1059B00081B200000400004081B2000004000040F9
-:1059C00081B200000400004081B2000004000040E9
-:1059D00081B200000400004081B2000004000040D9
-:1059E00081B200000400004081B2000004000040C9
-:1059F00081B200000400004081B2000004000040B9
-:105A000081B200000400004081B2000004000040A8
-:105A100081B200000400004081B200000400004098
-:105A200081B200000400004081B200000400004088
-:105A300081B200000400004081B200000400004078
-:105A400081B200000400004081B200000400004068
-:105A500081B200000400004081B200000400004058
-:105A600081B200000400004081B200000400004048
-:105A700081B200000400004081B200000400004038
-:105A800081B200000400004081B200000400004028
-:105A900081B200000400004081B200000400004018
-:105AA00081B200000400004081B200000400004008
-:105AB00081B200000400004081B2000004000040F8
-:105AC00081B200000400004081B2000004000040E8
-:105AD00081B200000400004081B2000004000040D8
-:105AE00081B200000400004081B2000004000040C8
-:105AF00081B200000400004081B2000004000040B8
-:105B000081B200000400004081B2000004000040A7
-:105B100081B200000400004081B200000400004097
-:105B200081B200000400004081B200000400004087
-:105B300081B200000400004081B200000400004077
-:105B400081B200000400004081B200000400004067
-:105B500081B200000400004081B200000400004057
-:105B600081B200000400004081B200000400004047
-:105B700081B200000400004081B200000400004037
-:105B800081B200000400004081B200000400004027
-:105B900081B200000400004081B200000400004017
-:105BA00081B200000400004081B200000400004007
-:105BB00081B200000400004081B2000004000040F7
-:105BC00081B200000400004081B2000004000040E7
-:105BD00081B200000400004081B2000004000040D7
-:105BE00081B200000400004081B2000004000040C7
-:105BF00081B200000400004081B2000004000040B7
-:105C000081B200000400004081B2000004000040A6
-:105C100081B200000400004081B200000400004096
-:105C200081B200000400004081B200000400004086
-:105C300081B200000400004081B200000400004076
-:105C400081B200000400004081B200000400004066
-:105C500081B200000400004081B200000400004056
-:105C600081B200000400004081B200000400004046
-:105C700081B200000400004081B200000400004036
-:105C800081B200000400004081B200000400004026
-:105C900081B200000400004081B200000400004016
-:105CA00081B200000400004081B200000400004006
-:105CB00081B200000400004081B2000004000040F6
-:105CC00081B200000400004081B2000004000040E6
-:105CD00081B200000400004081B2000004000040D6
-:105CE00081B200000400004081B2000004000040C6
-:105CF00081B200000400004081B2000004000040B6
-:105D000081B200000400004081B2000004000040A5
-:105D100081B200000400004081B200000400004095
-:105D200081B200000400004081B200000400004085
-:105D300081B200000400004081B200000400004075
-:105D400081B200000400004081B200000400004065
-:105D500081B200000400004081B200000400004055
-:105D600081B200000400004081B200000400004045
-:105D700081B200000400004081B200000400004035
-:105D800081B200000400004081B200000400004025
-:105D900081B200000400004081B200000400004015
-:105DA00081B200000400004081B200000400004005
-:105DB00081B200000400004081B2000004000040F5
-:105DC00081B200000400004081B2000004000040E5
-:105DD00081B200000400004081B2000004000040D5
-:105DE00081B200000400004081B2000004000040C5
-:105DF00081B200000400004081B2000004000040B5
-:105E000081B200000400004081B2000004000040A4
-:105E100081B200000400004081B200000400004094
-:105E200081B200000400004081B200000400004084
-:105E300081B200000400004081B200000400004074
-:105E400081B200000400004081B200000400004064
-:105E500081B200000400004081B200000400004054
-:105E600081B200000400004081B200000400004044
-:105E700081B200000400004081B200000400004034
-:105E800081B200000400004081B200000400004024
-:105E900081B200000400004081B200000400004014
-:105EA00081B200000400004081B200000400004004
-:105EB00081B200000400004081B2000004000040F4
-:105EC00081B200000400004081B2000004000040E4
-:105ED00081B200000400004081B2000004000040D4
-:105EE00081B200000400004081B2000004000040C4
-:105EF00081B200000400004081B2000004000040B4
-:105F000081B200000400004081B2000004000040A3
-:105F100081B200000400004081B200000400004093
-:105F200081B200000400004081B200000400004083
-:105F300081B200000400004081B200000400004073
-:105F400081B200000400004081B200000400004063
-:105F500081B200000400004081B200000400004053
-:105F600081B200000400004081B200000400004043
-:105F700081B200000400004081B200000400004033
-:105F800081B200000400004081B200000400004023
-:105F900081B200000400004081B200000400004013
-:105FA00081B200000400004081B200000400004003
-:105FB00081B200000400004081B2000004000040F3
-:105FC00081B200000400004081B2000004000040E3
-:105FD00081B200000400004081B2000004000040D3
-:105FE00081B200000400004081B2000004000040C3
-:105FF00081B200000400004081B2000004000040B3
-:1060000081B200000400004081B2000004000040A2
-:1060100081B200000400004081B200000400004092
-:1060200081B200000400004081B200000400004082
-:1060300081B200000400004081B200000400004072
-:1060400081B200000400004081B200000400004062
-:1060500081B200000400004081B200000400004052
-:1060600081B200000400004081B200000400004042
-:1060700081B200000400004081B200000400004032
-:1060800081B200000400004081B200000400004022
-:1060900081B200000400004081B200000400004012
-:1060A00081B200000400004081B200000400004002
-:1060B00081B200000400004081B2000004000040F2
-:1060C00081B200000400004081B2000004000040E2
-:1060D00081B200000400004081B2000004000040D2
-:1060E00081B200000400004081B2000004000040C2
-:1060F00081B200000400004081B2000004000040B2
-:1061000081B200000400004081B2000004000040A1
-:1061100081B200000400004081B200000400004091
-:1061200081B200000400004081B200000400004081
-:1061300081B200000400004081B200000400004071
-:1061400081B200000400004081B200000400004061
-:1061500081B200000400004081B200000400004051
-:1061600081B200000400004081B200000400004041
-:1061700081B200000400004081B200000400004031
-:1061800081B200000400004081B200000400004021
-:1061900081B200000400004081B200000400004011
-:1061A00081B200000400004081B200000400004001
-:1061B00081B200000400004081B2000004000040F1
-:1061C00081B200000400004081B2000004000040E1
-:1061D00081B200000400004081B2000004000040D1
-:1061E00081B200000400004081B2000004000040C1
-:1061F00081B200000400004081B2000004000040B1
-:1062000081B200000400004081B2000004000040A0
-:1062100081B200000400004081B200000400004090
-:1062200081B200000400004081B200000400004080
-:1062300081B200000400004081B200000400004070
-:1062400081B200000400004081B200000400004060
-:1062500081B200000400004081B200000400004050
-:1062600081B200000400004081B200000400004040
-:1062700081B200000400004081B200000400004030
-:1062800081B200000400004081B200000400004020
-:1062900081B200000400004081B200000400004010
-:1062A00081B200000400004081B200000400004000
-:1062B00081B200000400004081B2000004000040F0
-:1062C00081B200000400004081B2000004000040E0
-:1062D00081B200000400004081B2000004000040D0
-:1062E00081B200000400004081B2000004000040C0
-:1062F00081B200000400004081B2000004000040B0
-:1063000081B200000400004081B20000040000409F
-:1063100081B200000400004081B20000040000408F
-:1063200081B200000400004081B20000040000407F
-:1063300081B200000400004081B20000040000406F
-:1063400081B200000400004081B20000040000405F
-:1063500081B200000400004081B20000040000404F
-:1063600081B200000400004081B20000040000403F
-:1063700081B200000400004081B20000040000402F
-:1063800081B200000400004081B20000040000401F
-:1063900081B200000400004081B20000040000400F
-:1063A00081B200000400004081B2000004000040FF
-:1063B00081B200000400004081B2000004000040EF
-:1063C00081B200000400004081B2000004000040DF
-:1063D00081B200000400004081B2000004000040CF
-:1063E00081B200000400004081B2000004000040BF
-:1063F00081B200000400004081B2000004000040AF
-:1064000081B200000400004081B20000040000409E
-:1064100081B200000400004081B20000040000408E
-:1064200081B200000400004081B20000040000407E
-:1064300081B200000400004081B20000040000406E
-:1064400081B200000400004081B20000040000405E
-:1064500081B200000400004081B20000040000404E
-:1064600081B200000400004081B20000040000403E
-:1064700081B200000400004081B20000040000402E
-:1064800081B200000400004081B20000040000401E
-:1064900081B200000400004081B20000040000400E
-:1064A00081B200000400004081B2000004000040FE
-:1064B00081B200000400004081B2000004000040EE
-:1064C00081B200000400004081B2000004000040DE
-:1064D00081B200000400004081B2000004000040CE
-:1064E00081B200000400004081B2000004000040BE
-:1064F00081B200000400004081B2000004000040AE
-:1065000081B200000400004081B20000040000409D
-:1065100081B200000400004081B20000040000408D
-:1065200081B200000400004081B20000040000407D
-:1065300081B200000400004081B20000040000406D
-:1065400081B200000400004081B20000040000405D
-:1065500081B200000400004081B20000040000404D
-:1065600081B200000400004081B20000040000403D
-:1065700081B200000400004081B20000040000402D
-:1065800081B200000400004081B20000040000401D
-:1065900081B200000400004081B20000040000400D
-:1065A00081B200000400004081B2000004000040FD
-:1065B00081B200000400004081B2000004000040ED
-:1065C00081B200000400004081B2000004000040DD
-:1065D00081B200000400004081B2000004000040CD
-:1065E00081B200000400004081B2000004000040BD
-:1065F00081B200000400004081B2000004000040AD
-:1066000081B200000400004081B20000040000409C
-:1066100081B200000400004081B20000040000408C
-:1066200081B200000400004081B20000040000407C
-:1066300081B200000400004081B20000040000406C
-:1066400081B200000400004081B20000040000405C
-:1066500081B200000400004081B20000040000404C
-:1066600081B200000400004081B20000040000403C
-:1066700081B200000400004081B20000040000402C
-:1066800081B200000400004081B20000040000401C
-:1066900081B200000400004081B20000040000400C
-:1066A00081B200000400004081B2000004000040FC
-:1066B00081B200000400004081B2000004000040EC
-:1066C00081B200000400004081B2000004000040DC
-:1066D00081B200000400004081B2000004000040CC
-:1066E00081B200000400004081B2000004000040BC
-:1066F00081B200000400004081B2000004000040AC
-:1067000081B200000400004081B20000040000409B
-:1067100081B200000400004081B20000040000408B
-:1067200081B200000400004081B20000040000407B
-:1067300081B200000400004081B20000040000406B
-:1067400081B200000400004081B20000040000405B
-:1067500081B200000400004081B20000040000404B
-:1067600081B200000400004081B20000040000403B
-:1067700081B200000400004081B20000040000402B
-:1067800081B200000400004081B20000040000401B
-:1067900081B200000400004081B20000040000400B
-:1067A00081B200000400004081B2000004000040FB
-:1067B00081B200000400004081B2000004000040EB
-:1067C00081B200000400004081B2000004000040DB
-:1067D00081B200000400004081B2000004000040CB
-:1067E00081B200000400004081B2000004000040BB
-:1067F00081B200000400004081B2000004000040AB
-:1068000081B200000400004081B20000040000409A
-:1068100081B200000400004081B20000040000408A
-:1068200081B200000400004081B20000040000407A
-:1068300081B200000400004081B20000040000406A
-:1068400081B200000400004081B20000040000405A
-:1068500081B200000400004081B20000040000404A
-:1068600081B200000400004081B20000040000403A
-:1068700081B200000400004081B20000040000402A
-:1068800081B200000400004081B20000040000401A
-:1068900081B200000400004081B20000040000400A
-:1068A00081B200000400004081B2000004000040FA
-:1068B00081B200000400004081B2000004000040EA
-:1068C00081B200000400004081B2000004000040DA
-:1068D00081B200000400004081B2000004000040CA
-:1068E00081B200000400004081B2000004000040BA
-:1068F00081B200000400004081B2000004000040AA
-:1069000081B200000400004081B200000400004099
-:1069100081B200000400004081B200000400004089
-:1069200081B200000400004081B200000400004079
-:1069300081B200000400004081B200000400004069
-:1069400081B200000400004081B200000400004059
-:1069500081B200000400004081B200000400004049
-:1069600081B200000400004081B200000400004039
-:1069700081B200000400004081B200000400004029
-:1069800081B200000400004081B200000400004019
-:1069900081B200000400004081B200000400004009
-:1069A00081B200000400004081B2000004000040F9
-:1069B00081B200000400004081B2000004000040E9
-:1069C00081B200000400004081B2000004000040D9
-:1069D00081B200000400004081B2000004000040C9
-:1069E00081B200000400004081B2000004000040B9
-:1069F00081B200000400004081B2000004000040A9
-:106A000081B200000400004081B200000400004098
-:106A100081B200000400004081B200000400004088
-:106A200081B200000400004081B200000400004078
-:106A300081B200000400004081B200000400004068
-:106A400081B200000400004081B200000400004058
-:106A500081B200000400004081B200000400004048
-:106A600081B200000400004081B200000400004038
-:106A700081B200000400004081B200000400004028
-:106A800081B200000400004081B200000400004018
-:106A900081B200000400004081B200000400004008
-:106AA00081B200000400004081B2000004000040F8
-:106AB00081B200000400004081B2000004000040E8
-:106AC00081B200000400004081B2000004000040D8
-:106AD00081B200000400004081B2000004000040C8
-:106AE00081B200000400004081B2000004000040B8
-:106AF00081B200000400004081B2000004000040A8
-:106B000081B200000400004081B200000400004097
-:106B100081B200000400004081B200000400004087
-:106B200081B200000400004081B200000400004077
-:106B300081B200000400004081B200000400004067
-:106B400081B200000400004081B200000400004057
-:106B500081B200000400004081B200000400004047
-:106B600081B200000400004081B200000400004037
-:106B700081B200000400004081B200000400004027
-:106B800081B200000400004081B200000400004017
-:106B900081B200000400004081B200000400004007
-:106BA00081B200000400004081B2000004000040F7
-:106BB00081B200000400004081B2000004000040E7
-:106BC00081B200000400004081B2000004000040D7
-:106BD00081B200000400004081B2000004000040C7
-:106BE00081B200000400004081B2000004000040B7
-:106BF00081B200000400004081B2000004000040A7
-:106C000081B200000400004081B200000400004096
-:106C100081B200000400004081B200000400004086
-:106C200081B200000400004081B200000400004076
-:106C300081B200000400004081B200000400004066
-:106C400081B200000400004081B200000400004056
-:106C500081B200000400004081B200000400004046
-:106C600081B200000400004081B200000400004036
-:106C700081B200000400004081B200000400004026
-:106C800081B200000400004081B200000400004016
-:106C900081B200000400004081B200000400004006
-:106CA00081B200000400004081B2000004000040F6
-:106CB00081B200000400004081B2000004000040E6
-:106CC00081B200000400004081B2000004000040D6
-:106CD00081B200000400004081B2000004000040C6
-:106CE00081B200000400004081B2000004000040B6
-:106CF00081B200000400004081B2000004000040A6
-:106D000081B200000400004081B200000400004095
-:106D100081B200000400004081B200000400004085
-:106D200081B200000400004081B200000400004075
-:106D300081B200000400004081B200000400004065
-:106D400081B200000400004081B200000400004055
-:106D500081B200000400004081B200000400004045
-:106D600081B200000400004081B200000400004035
-:106D700081B200000400004081B200000400004025
-:106D800081B200000400004081B200000400004015
-:106D900081B200000400004081B200000400004005
-:106DA00081B200000400004081B2000004000040F5
-:106DB00081B200000400004081B2000004000040E5
-:106DC00081B200000400004081B2000004000040D5
-:106DD00081B200000400004081B2000004000040C5
-:106DE00081B200000400004081B2000004000040B5
-:106DF00081B200000400004081B2000004000040A5
-:106E000081B200000400004081B200000400004094
-:106E100081B200000400004081B200000400004084
-:106E200081B200000400004081B200000400004074
-:106E300081B200000400004081B200000400004064
-:106E400081B200000400004081B200000400004054
-:106E500081B200000400004081B200000400004044
-:106E600081B200000400004081B200000400004034
-:106E700081B200000400004081B200000400004024
-:106E800081B200000400004081B200000400004014
-:106E900081B200000400004081B200000400004004
-:106EA00081B200000400004081B2000004000040F4
-:106EB00081B200000400004081B2000004000040E4
-:106EC00081B200000400004081B2000004000040D4
-:106ED00081B200000400004081B2000004000040C4
-:106EE00081B200000400004081B2000004000040B4
-:106EF00081B200000400004081B2000004000040A4
-:106F000081B200000400004081B200000400004093
-:106F100081B200000400004081B200000400004083
-:106F200081B200000400004081B200000400004073
-:106F300081B200000400004081B200000400004063
-:106F400081B200000400004081B200000400004053
-:106F500081B200000400004081B200000400004043
-:106F600081B200000400004081B200000400004033
-:106F700081B200000400004081B200000400004023
-:106F800081B200000400004081B200000400004013
-:106F900081B200000400004081B200000400004003
-:106FA00081B200000400004081B2000004000040F3
-:106FB00081B200000400004081B2000004000040E3
-:106FC00081B200000400004081B2000004000040D3
-:106FD00081B200000400004081B2000004000040C3
-:106FE00081B200000400004081B2000004000040B3
-:106FF00081B200000400004081B2000004000040A3
-:1070000081B200000400004081B200000400004092
-:1070100081B200000400004081B200000400004082
-:1070200081B200000400004081B200000400004072
-:1070300081B200000400004081B200000400004062
-:1070400081B200000400004081B200000400004052
-:1070500081B200000400004081B200000400004042
-:1070600081B200000400004081B200000400004032
-:1070700081B200000400004081B200000400004022
-:1070800081B200000400004081B200000400004012
-:1070900081B200000400004081B200000400004002
-:1070A00081B200000400004081B2000004000040F2
-:1070B00081B200000400004081B2000004000040E2
-:1070C00081B200000400004081B2000004000040D2
-:1070D00081B200000400004081B2000004000040C2
-:1070E00081B200000400004081B2000004000040B2
-:1070F00081B200000400004081B2000004000040A2
-:1071000081B200000400004081B200000400004091
-:1071100081B200000400004081B200000400004081
-:1071200081B200000400004081B200000400004071
-:1071300081B200000400004081B200000400004061
-:1071400081B200000400004081B200000400004051
-:1071500081B200000400004081B200000400004041
-:1071600081B200000400004081B200000400004031
-:1071700081B200000400004081B200000400004021
-:1071800081B200000400004081B200000400004011
-:1071900081B200000400004081B200000400004001
-:1071A00081B200000400004081B2000004000040F1
-:1071B00081B200000400004081B2000004000040E1
-:1071C00081B200000400004081B2000004000040D1
-:1071D00081B200000400004081B2000004000040C1
-:1071E00081B200000400004081B2000004000040B1
-:1071F00081B200000400004081B2000004000040A1
-:1072000081B200000400004081B200000400004090
-:1072100081B200000400004081B200000400004080
-:1072200081B200000400004081B200000400004070
-:1072300081B200000400004081B200000400004060
-:1072400081B200000400004081B200000400004050
-:1072500081B200000400004081B200000400004040
-:1072600081B200000400004081B200000400004030
-:1072700081B200000400004081B200000400004020
-:1072800081B200000400004081B200000400004010
-:1072900081B200000400004081B200000400004000
-:1072A00081B200000400004081B2000004000040F0
-:1072B00081B200000400004081B2000004000040E0
-:1072C00081B200000400004081B2000004000040D0
-:1072D00081B200000400004081B2000004000040C0
-:1072E00081B200000400004081B2000004000040B0
-:1072F00081B200000400004081B2000004000040A0
-:1073000081B200000400004081B20000040000408F
-:1073100081B200000400004081B20000040000407F
-:1073200081B200000400004081B20000040000406F
-:1073300081B200000400004081B20000040000405F
-:1073400081B200000400004081B20000040000404F
-:1073500081B200000400004081B20000040000403F
-:1073600081B200000400004081B20000040000402F
-:1073700081B200000400004081B20000040000401F
-:1073800081B200000400004081B20000040000400F
-:1073900081B200000400004081B2000004000040FF
-:1073A00081B200000400004081B2000004000040EF
-:1073B00081B200000400004081B2000004000040DF
-:1073C00081B200000400004081B2000004000040CF
-:1073D00081B200000400004081B2000004000040BF
-:1073E00081B200000400004081B2000004000040AF
-:1073F00081B200000400004081B20000040000409F
-:1074000081B200000400004081B20000040000408E
-:1074100081B200000400004081B20000040000407E
-:1074200081B200000400004081B20000040000406E
-:1074300081B200000400004081B20000040000405E
-:1074400081B200000400004081B20000040000404E
-:1074500081B200000400004081B20000040000403E
-:1074600081B200000400004081B20000040000402E
-:1074700081B200000400004081B20000040000401E
-:1074800081B200000400004081B20000040000400E
-:1074900081B200000400004081B2000004000040FE
-:1074A00081B200000400004081B2000004000040EE
-:1074B00081B200000400004081B2000004000040DE
-:1074C00081B200000400004081B2000004000040CE
-:1074D00081B200000400004081B2000004000040BE
-:1074E00081B200000400004081B2000004000040AE
-:1074F00081B200000400004081B20000040000409E
-:1075000081B200000400004081B20000040000408D
-:1075100081B200000400004081B20000040000407D
-:1075200081B200000400004081B20000040000406D
-:1075300081B200000400004081B20000040000405D
-:1075400081B200000400004081B20000040000404D
-:1075500081B200000400004081B20000040000403D
-:1075600081B200000400004081B20000040000402D
-:1075700081B200000400004081B20000040000401D
-:1075800081B200000400004081B20000040000400D
-:1075900081B200000400004081B2000004000040FD
-:1075A00081B200000400004081B2000004000040ED
-:1075B00081B200000400004081B2000004000040DD
-:1075C00081B200000400004081B2000004000040CD
-:1075D00081B200000400004081B2000004000040BD
-:1075E00081B200000400004081B2000004000040AD
-:1075F00081B200000400004081B20000040000409D
-:1076000081B200000400004081B20000040000408C
-:1076100081B200000400004081B20000040000407C
-:1076200081B200000400004081B20000040000406C
-:1076300081B200000400004081B20000040000405C
-:1076400081B200000400004081B20000040000404C
-:1076500081B200000400004081B20000040000403C
-:1076600081B200000400004081B20000040000402C
-:1076700081B200000400004081B20000040000401C
-:1076800081B200000400004081B20000040000400C
-:1076900081B200000400004081B2000004000040FC
-:1076A00081B200000400004081B2000004000040EC
-:1076B00081B200000400004081B2000004000040DC
-:1076C00081B200000400004081B2000004000040CC
-:1076D00081B200000400004081B2000004000040BC
-:1076E00081B200000400004081B2000004000040AC
-:1076F00081B200000400004081B20000040000409C
-:1077000081B200000400004081B20000040000408B
-:1077100081B200000400004081B20000040000407B
-:1077200081B200000400004081B20000040000406B
-:1077300081B200000400004081B20000040000405B
-:1077400081B200000400004081B20000040000404B
-:1077500081B200000400004081B20000040000403B
-:1077600081B200000400004081B20000040000402B
-:1077700081B200000400004081B20000040000401B
-:1077800081B200000400004081B20000040000400B
-:1077900081B200000400004081B2000004000040FB
-:1077A00081B200000400004081B2000004000040EB
-:1077B00081B200000400004081B2000004000040DB
-:1077C00081B200000400004081B2000004000040CB
-:1077D00081B200000400004081B2000004000040BB
-:1077E00081B200000400004081B2000004000040AB
-:1077F00081B200000400004081B20000040000409B
-:1078000081B200000400004081B20000040000408A
-:1078100081B200000400004081B20000040000407A
-:1078200081B200000400004081B20000040000406A
-:1078300081B200000400004081B20000040000405A
-:1078400081B200000400004081B20000040000404A
-:1078500081B200000400004081B20000040000403A
-:1078600081B200000400004081B20000040000402A
-:1078700081B200000400004081B20000040000401A
-:1078800081B200000400004081B20000040000400A
-:1078900081B200000400004081B2000004000040FA
-:1078A00081B200000400004081B2000004000040EA
-:1078B00081B200000400004081B2000004000040DA
-:1078C00081B200000400004081B2000004000040CA
-:1078D00081B200000400004081B2000004000040BA
-:1078E00081B200000400004081B2000004000040AA
-:1078F00081B200000400004081B20000040000409A
-:1079000081B200000400004081B200000400004089
-:1079100081B200000400004081B200000400004079
-:1079200081B200000400004081B200000400004069
-:1079300081B200000400004081B200000400004059
-:1079400081B200000400004081B200000400004049
-:1079500081B200000400004081B200000400004039
-:1079600081B200000400004081B200000400004029
-:1079700081B200000400004081B200000400004019
-:1079800081B200000400004081B200000400004009
-:1079900081B200000400004081B2000004000040F9
-:1079A00081B200000400004081B2000004000040E9
-:1079B00081B200000400004081B2000004000040D9
-:1079C00081B200000400004081B2000004000040C9
-:1079D00081B200000400004081B2000004000040B9
-:1079E00081B200000400004081B2000004000040A9
-:1079F00081B200000400004081B200000400004099
-:107A000081B200000400004081B200000400004088
-:107A100081B200000400004081B200000400004078
-:107A200081B200000400004081B200000400004068
-:107A300081B200000400004081B200000400004058
-:107A400081B200000400004081B200000400004048
-:107A500081B200000400004081B200000400004038
-:107A600081B200000400004081B200000400004028
-:107A700081B200000400004081B200000400004018
-:107A800081B200000400004081B200000400004008
-:107A900081B200000400004081B2000004000040F8
-:107AA00081B200000400004081B2000004000040E8
-:107AB00081B200000400004081B2000004000040D8
-:107AC00081B200000400004081B2000004000040C8
-:107AD00081B200000400004081B2000004000040B8
-:107AE00081B200000400004081B2000004000040A8
-:107AF00081B200000400004081B200000400004098
-:107B000081B200000400004081B200000400004087
-:107B100081B200000400004081B200000400004077
-:107B200081B200000400004081B200000400004067
-:107B300081B200000400004081B200000400004057
-:107B400081B200000400004081B200000400004047
-:107B500081B200000400004081B200000400004037
-:107B600081B200000400004081B200000400004027
-:107B700081B200000400004081B200000400004017
-:107B800081B200000400004081B200000400004007
-:107B900081B200000400004081B2000004000040F7
-:107BA00081B200000400004081B2000004000040E7
-:107BB00081B200000400004081B2000004000040D7
-:107BC00081B200000400004081B2000004000040C7
-:107BD00081B200000400004081B2000004000040B7
-:107BE00081B200000400004081B2000004000040A7
-:107BF00081B200000400004081B200000400004097
-:107C000081B200000400004081B200000400004086
-:107C100081B200000400004081B200000400004076
-:107C200081B200000400004081B200000400004066
-:107C300081B200000400004081B200000400004056
-:107C400081B200000400004081B200000400004046
-:107C500081B200000400004081B200000400004036
-:107C600081B200000400004081B200000400004026
-:107C700081B200000400004081B200000400004016
-:107C800081B200000400004081B200000400004006
-:107C900081B200000400004081B2000004000040F6
-:107CA00081B200000400004081B2000004000040E6
-:107CB00081B200000400004081B2000004000040D6
-:107CC00081B200000400004081B2000004000040C6
-:107CD00081B200000400004081B2000004000040B6
-:107CE00081B200000400004081B2000004000040A6
-:107CF00081B200000400004081B200000400004096
-:107D000081B200000400004081B200000400004085
-:107D100081B200000400004081B200000400004075
-:107D200081B200000400004081B200000400004065
-:107D300081B200000400004081B200000400004055
-:107D400081B200000400004081B200000400004045
-:107D500081B200000400004081B200000400004035
-:107D600081B200000400004081B200000400004025
-:107D700081B200000400004081B200000400004015
-:107D800081B200000400004081B200000400004005
-:107D900081B200000400004081B2000004000040F5
-:107DA00081B200000400004081B2000004000040E5
-:107DB00081B200000400004081B2000004000040D5
-:107DC00081B200000400004081B2000004000040C5
-:107DD00081B200000400004081B2000004000040B5
-:107DE00081B200000400004081B2000004000040A5
-:107DF00081B200000400004081B200000400004095
-:107E000081B200000400004081B200000400004084
-:107E100081B200000400004081B200000400004074
-:107E200081B200000400004081B200000400004064
-:107E300081B200000400004081B200000400004054
-:107E400081B200000400004081B200000400004044
-:107E500081B200000400004081B200000400004034
-:107E600081B200000400004081B200000400004024
-:107E700081B200000400004081B200000400004014
-:107E800081B200000400004081B200000400004004
-:107E900081B200000400004081B2000004000040F4
-:107EA00081B200000400004081B2000004000040E4
-:107EB00081B200000400004081B2000004000040D4
-:107EC00081B200000400004081B2000004000040C4
-:107ED00081B200000400004081B2000004000040B4
-:107EE00081B200000400004081B2000004000040A4
-:107EF00081B200000400004081B200000400004094
-:107F000081B200000400004081B200000400004083
-:107F100081B200000400004081B200000400004073
-:107F200081B200000400004081B200000400004063
-:107F300081B200000400004081B200000400004053
-:107F400081B200000400004081B200000400004043
-:107F500081B200000400004081B200000400004033
-:107F600081B200000400004081B200000400004023
-:107F700081B200000400004081B200000400004013
-:107F800081B200000400004081B200000400004003
-:107F900081B200000400004081B2000004000040F3
-:107FA00081B200000400004081B2000004000040E3
-:107FB00081B200000400004081B2000004000040D3
-:107FC00081B200000400004081B20000F70F00BC45
-:107FD00080B200000380004081B2000003800040B6
-:107FE00081B200000380004081B2000003800040A5
-:107FF00081B200000380004081B200000380004095
-:1080000081B200000380004081B200000380004084
-:1080100081B200003180004081B200003480004015
-:1080200081B200003580004081B2000004000040B1
-:1080300081B200001B80818080320000EC89A24068
-:10804000916F00000000004C90B301005C952EA2DF
-:1080500080B00100FF000080F489010090952AC8DB
-:10806000E5B10100000000A1F0B1010000000040F6
-:10807000F0B10100000000A4F0B10100000000D048
-:10808000F0B10100000000D1F0B10100000000D209
-:10809000F0B101000000004CF0B10100000000D47C
-:1080A000F0B10100000000D3F0B10100000000EECB
-:1080B000F0B101000000004EF0B1010000000040EE
-:1080C00044B1010018801181983000000000514037
-:1080D00081B201001A8011829830000000005240E5
-:1080E00081B20100EC890048FD930000B603004016
-:1080F000A19901002380A242FD7F00002080008022
-:1081000080320000228011818230000022805140A4
-:1081100081B2000022801182823000002280524011
-:1081200081B200002C800048FD9300002780008071
-:10813000803200002680A253077C000000005153CB
-:10814000079001002A800052079000002980A25267
-:10815000077C00000000525207900100000000530D
-:108160000790010000000048FD9301000000004559
-:10817000F39301005C952EA252B30100FF00008032
-:10818000F48901000000004CE4B10100000000A9E6
-:1081900045B101003080004C80B200000000454035
-:1081A00081B201000000554081B201001B840540EE
-:1081B00049B100001B84054049B1000000000540A2
-:1081C00049B10100E1800040813201000000004B14
-:1081D000DEB20100770000404B9901000000004032
-:1081E000FD93010000000048FD83010002000040F3
-:1081F0009B9B0100000000A59CB30100F699004084
-:108200008132010058952044E0B1010000C000A671
-:1082100036B10100D014004047990100050000402C
-:10822000F599010000380040F59901000006004072
-:10823000F599010000000040F59901000518004083
-:10824000F599010002090040F59901000400004081
-:10825000F599010050030040813201007B0300408A
-:1082600081320100E083004081320100108400402F
-:108270008132010008840040813201006095204075
-:10828000E1B1010070952040E1B10100000000491A
-:10829000DD9101000000004091B3010000000040AA
-:1082A00085B301005C952040E1B101001A820040D5
-:1082B0008132010071830040813201000200009789
-:1082C00080980100000000402EB101000200004033
-:1082D0002EDD01009001004093980100290100402B
-:1082E000813201005C810040AF3301007999004088
-:1082F000813201000000454081B20100000055407C
-:1083000081B201004984004081B2000004000040B5
-:1083100081B200000400004081B20000040000406F
-:1083200081B200000400004081B20000040000405F
-:1083300081B200000400004081B20000040000404F
-:1083400081B200000400004081B20000040000403F
-:1083500081B200007701004181C00000718051406E
-:1083600081B200007280524081B20000738055409B
-:1083700081B200007480564081B2000055019181A5
-:10838000803000005A01454081B2000055019182C1
-:10839000803000005A01464081B200005A01004876
-:1083A000FD9300005A010048FD9300005A01004966
-:1083B000FD8300005A01004AFD83000000000040D8
-:1083C00049B10100AE0300CBA3C9010000000020A9
-:1083D00046B10100000000D2F1B10100000000D35D
-:1083E000F1B1010000000042F0B1010000000045C1
-:1083F00061B101002000002062DD01000000A8D072
-:10840000E1B100007C80004081B20000000000A8C3
-:1084100098B00100048000408BB30000B10300401D
-:10842000A19901008480A241976F000000000045DF
-:10843000A1C101000000000080B001000000A20402
-:108440008094000080153F4297E301000000004047
-:1084500049B10100000060030294010000000040E7
-:1084600007B00100040000CB99CB0100000000CC54
-:10847000F38301008E80A241976F0000000000CBC3
-:10848000F3930100AE0300CBA3C90100000000205C
-:1084900044B1010000000044F1B1010000000000FF
-:1084A000F0B1010000000004F0B10100000000A1E3
-:1084B000E0B10100050000406199010020000020AA
-:1084C00062DD01009580A84081320000C6020020D4
-:1084D000423101000000A241056C0100000080CB88
-:1084E000DB910100000019418BB3010060000040E6
-:1084F000619901009B80A8B18C33000060000040AE
-:10850000619901009D80A8B194330000A38014C636
-:1085100081320000180000C683F401006A84224FF3
-:10852000830400007F80004081B20000FF0100C68C
-:1085300081880100000000C697A301007F801F5CB6
-:10854000975300009E831DC68132000000002F4318
-:1085500081F00100A980004010C9000005810040A1
-:1085600081B200003681004081B20000DA8100CA89
-:1085700063B300002D81004081B200001481004DE2
-:1085800083B000001E81004E61B100000D810040EB
-:1085900085B000001481004C83B00000F0800040E2
-:1085A00085B000009181004049B100003D8100404C
-:1085B000C1B100008D81004081B200000D810040FA
-:1085C00085B00000DD81004049B100006A8400CA26
-:1085D0009BB3000046810040C1B100004E810040C5
-:1085E000C1B1000055810040C1B10000568100407A
-:1085F000C1B1000057810040C1B100005881004066
-:10860000C1B100005981004081B000005981004192
-:1086100081B00000CE81004081B20000DD8300BB4C
-:10862000ABB30000DB8100CACFB30000D3800040B1
-:1086300049B10000DF80004081B20000DC810040D1
-:1086400081B200006A84004081B20000DA800040FC
-:1086500081B200006A8400CA77B300001581004D22
-:1086600083B000001C81004E61B100000D8100BB91
-:1086700085B000001581004C83B000000D8100BB67
-:1086800085B00000F08000BB85B00000E2800040B3
-:1086900081B200006A8400CA4DB3000064820040C9
-:1086A00049B100008F82004049B10000C8142EBBC0
-:1086B00085B00100000000EE82B001000000004122
-:1086C000E0B10100FF7F00A2A08B01000000004488
-:1086D000A5B30100758000CAA733010002810040E4
-:1086E00081B200004E01004D933001004E01004E5A
-:1086F000933001004E01004C93300100088400408B
-:10870000813201006A84004081B20000549500402B
-:10871000459901006A8400CAE5B10000000080406C
-:1087200097B00100E88022428F6F0000EA8022416A
-:108730008F6F0000EC801ECA81320000EE801FCADD
-:1087400081320000000000CAC9B101006A84004201
-:108750008FB30000000000CACDB101006A8400415F
-:108760008FB30000000000CACFB101006A8400404E
-:108770008FB30000008100A6C6B101006A840040EA
-:1087800081B20000008000A6C6B101006A840040EA
-:108790008FB30000781800404999010010002F9C09
-:1087A00089B00100078100403933010018002F9B78
-:1087B00089B00100078100403733010000002F9A83
-:1087C00089B00100078100403533010008002F996E
-:1087D00089B001000781004033330100008000AE02
-:1087E00047C9010080000040F1990100000000CA63
-:1087F000F1B1010000000042F0B10100401800405A
-:10880000E19901000000004561B10100200000AEC7
-:1088100063DD01000281284081320000FF800040BA
-:1088200081B2000002814240813200000000005C01
-:10883000699301006A841A449393000005814240C1
-:108840008132000004810058699300000000004458
-:10885000F0D101000000A44081B200000C81A240D0
-:10886000E16D00000000004445D10100000080409F
-:10887000E1B1010000008041E1D101000D81375CD0
-:10888000613100000000004262B101001181284006
-:10889000813200000E81004081B20000000000CA59
-:1088A00063B101001181A840813200006A84174041
-:1088B00081B200001681004081B00000168100BB2B
-:1088C00081B000000000004160B1010000000040E4
-:1088D00062B101001781A84081320000000000CA87
-:1088E00063B101006A842840813200001981004090
-:1088F00081B2000050950040479901001F8100BBE4
-:1089000087B0000050952F4087B0010021812240A0
-:10891000957F00006A8460409583000002002DF07E
-:1089200084B0010022813640813200000000004204
-:1089300062B101002381A8408132000000000043A1
-:1089400062B101002581A84081320000000000CA08
-:1089500063B101002781A840813200000000164069
-:1089600081B201006A84224143510000000800CA1C
-:1089700095CB01002281004185C000002F81A242D9
-:10898000676F00000000004167B301002F81424083
-:10899000813200000000004065B30100000000408B
-:1089A0009383010000001ACA699701006A84264077
-:1089B0008132000034814240813200006A841A44CE
-:1089C000939300006A842043956F00006A8480CAF4
-:1089D000673300006A842240656F00006A84006F7C
-:1089E000DB910000C100004081320100358022404F
-:1089F000803200006A84004081B200000000005F05
-:108A0000959301004281A244216F00000000005FA5
-:108A1000958301000000005E95930100000000575F
-:108A200095930100000000CAC3B101004581225B9B
-:108A3000957F00000000004BFD9301006A84004018
-:108A400081B2000049812240AF6F00001BF500CACF
-:108A5000959B01004A81004081B200001BFD00CAC5
-:108A6000959B0100000000CA7FB30100260100CAE7
-:108A7000C53101000000005F958301006A8400CACF
-:108A8000C5B10000DF6F00CA959B010000000055D2
-:108A900095930100000000CAC7B101006A84225FFB
-:108AA000957F000026010040813201000000005F38
-:108AB000958301006A8400CAC7B100006A8400CAB5
-:108AC000C9B100006A8400CACBB100006A8400CA40
-:108AD000CDB100006A8400CACFB1000000002E4270
-:108AE00081E001009814004048C901006A8400CA6E
-:108AF000E1B100000000004009B10100200000A623
-:108B000082B001005E81A25E0B7D0000008000410A
-:108B1000089901006081A25E0B7D0000208000A604
-:108B200008B1010062819F85823000006181A24FFF
-:108B30000B7D00000000004121B30100028000A66F
-:108B400082B00100C9810040813201001000004163
-:108B500084E40100038000A682B00100C9810040C6
-:108B600081320100F0FF00418688010000000043CF
-:108B7000849401000F0000A686B0010010C40043D9
-:108B8000869801007581A243846C000000000043B8
-:108B900021B30100200000A682B001001C000041AA
-:108BA00082DC01007281A25E0B7D000004000041A6
-:108BB000089901007E81004081B20000410100A6B9
-:108BC00086B00100500C0043869801007A81A243D0
-:108BD000846C00000000004121B301007E81004050
-:108BE00081B20000410100A686B00100600C004384
-:108BF000869801007E81A243846C00000000004240
-:108C000021B30100200000A682B001007F81A25E96
-:108C10000B7D000040130041089901008781224329
-:108C2000216F0000200000A682B001001200004168
-:108C300082DC01008481A25E0B7D00000004004103
-:108C4000089901008C81004081B20000200000A63C
-:108C500082B001001900004182DC01008981A25E1E
-:108C60000B7D000000A00041089901008C810040AC
-:108C700081B200000000804081B20100200000A607
-:108C800080B00100000000CA819401008F81A25EC3
-:108C90000B7D00006A84004008B10000C8142EBBA0
-:108CA00085B001009281A25E0B7D000000000040B3
-:108CB00087B00100A1812243216F0000B0812244CE
-:108CC000216F0000118000A682B00100C981004020
-:108CD00081320100B881224A837C000000000040FC
-:108CE000879001009C81224D837C000000000041A0
-:108CF000879001009E81224F837C0000000000438A
-:108D000087900100A081224E837C00000000004279
-:108D100087900100B881004081B20000018000A668
-:108D200082B00100C981004081320100018000A6AB
-:108D300082B00100C981004081320100B881224225
-:108D4000837C000000000040879001001C8000A68A
-:108D500082B00100C981004081320100AB8122450F
-:108D6000837C00000000004187900100AD81224417
-:108D7000837C00000000004387900100AF81224304
-:108D8000837C00000000004287900100B881004011
-:108D900081B20000018000A682B00100C9810040BC
-:108DA00081320100018000A682B00100C98100402B
-:108DB00081320100B8812242837C00000000004023
-:108DC00087900100000000438790010000000041EF
-:108DD00087900100008000A682B00100C981004098
-:108DE00081320100BC81224B837C000000000040E6
-:108DF0008780010000000043E0B101000000004056
-:108E0000AFB30100C5812240877C0000C581A2412B
-:108E1000877C000000000041AEB30100000000406C
-:108E200081B30100C4812242877C0000C581000B10
-:108E30007DB300000000000F7DB30100FF7F00A2A2
-:108E4000A08B010000000044A5B30100758000CA9A
-:108E5000A73301000281004081B2000020000041E0
-:108E600082DC0100CA81A25E0B7D0000000000418F
-:108E700008B10100CC819F85823000000000804055
-:108E800081B20100D18114F781300000D181A24963
-:108E9000FD7F000000000048FD930100D48115F81B
-:108EA00081140000D481A24AFD7F00000000004828
-:108EB000FD930100D681A2C881320000400000402D
-:108EC00080DC01000010004080DC01000000004058
-:108ED000EFB30100D8814240F1330000048100402B
-:108EE000689700006A8400BB6BB300006A8400BB13
-:108EF000B1B300006A84004081B20000CC142E405F
-:108F000087B00100FF7F00A2A08B0100D8000043C2
-:108F1000B2330100000068DA89B001007C00004033
-:108F20008B9801000000005089F001000000004112
-:108F300089D0010003000044888C01000000004239
-:108F400087C0010000000041A5B30100D800004324
-:108F5000B2330100000000DAF1B10100000000426C
-:108F600087C0010000000041A5C30100F881224430
-:108F700089500000F88122448B500000E781A25004
-:108F8000A56F000000000042A5E30100000000CA38
-:108F9000A7B30100758000BB85300100CC142ED230
-:108FA00095C30100AE0300CBA3C90100000000205F
-:108FB00042B101000000005081B00100F581A241E2
-:108FC00081500000F481A2F280300000E78100406F
-:108FD000A5B3000000000042A5E30100000000CAA4
-:108FE000A7B30100758000BB8530010002810040FD
-:108FF00081B20000D9000041B3730100000080502D
-:10900000B5F30100D8000041B3F30000000000D91F
-:10901000B3FB0100003000A6B8B30100F20000402D
-:1090200081320100250100422D01010000020040B3
-:1090300083980100EB0000408132010000000050E5
-:1090400081B001002601004081320100098210DA5E
-:10905000B56B00000A8200412D8100000000004134
-:109060002D910100280100408132010025010040BE
-:109070002D110100000000402D8101000682A24157
-:1090800081500000260100422D0101002501004011
-:1090900081320100260100422D110100250100400E
-:1090A0002D110100158204402D0100002501004012
-:1090B000813201001182004081B20000280100408D
-:1090C00081320100250100422D010100F200004023
-:1090D000B9330100000000422D81010000008041F1
-:1090E0002D8101000000804081B20100000300409A
-:1090F000819801000000004018B10100800000408C
-:109100008398010000190040459901000000424089
-:1091100081B20100000043FFF1B10100000000FF37
-:10912000F1B101000000004181C0010000000040D9
-:1091300018B101001F82A2418350000000160040B8
-:1091400045990100001900404399010000000047C3
-:1091500043C101000000004083B00100000000F3A3
-:1091600080B001000000005B81D0010000000041E0
-:1091700080D0010000000040F6B101000000005B5B
-:1091800043C101000000004183C001002982A254B4
-:10919000836C000000000040F7B1010000000041B6
-:1091A00083C001003082A206836C00000000804072
-:1091B00081B201000000800791B00100E180004011
-:1091C000813201003982A240976C000028000040E3
-:1091D000B39B01003A82004081B2000028000040A9
-:1091E000B39B0100FC81004081320100000000DAE5
-:1091F000F5B10100FC810042B3430100000000DA38
-:10920000F5B10100FC810042B3430100000000DA27
-:10921000F5B101004E000040B39B0100FC8100400D
-:1092200081320100080000DAF7F50100500000402B
-:1092300091980100000000478FB00100FC810048B8
-:10924000B2330100000000DAF7B10100080000DAD3
-:10925000F7F501000000004291C001004582A241E3
-:109260008F5000000000004145D10100080000407F
-:10927000B39B0100FC81004081320100000000DA54
-:10928000FDB101000A000040B39B0100FC810040D9
-:1092900081320100000000DAFDB101001800004039
-:1092A000B39B0100FC81004081320100000000DA24
-:1092B000FDB1010016000040B39B0100FC8100409D
-:1092C00081320100000000DAFDB10100348200406B
-:1092D000813201001E000048B2CB0100FC81004039
-:1092E00081320100000000DA91C001000000004856
-:1092F000B2CB0100FC8100408132010000006EDA37
-:109300008FB0010002000048B2CB0100FC81004098
-:1093100081320100000000DAFDB1010004000048C4
-:10932000B2CB0100FC81004081320100000080DAF4
-:10933000FDB101006F822250FD7F00006F82224547
-:10934000FD7F000040160040459901003582004035
-:109350004931010008000048B2CB0100FE81004005
-:10936000813201006D82A2408F6C00007282222047
-:10937000B56F00006F82004081B20000DB820040C8
-:109380008132010072822240976C00006F8242405D
-:10939000813200000000004F6993010004810058F1
-:1093A000699300005416004047990100000000FE38
-:1093B000F4B101000000004081B20100000000FE95
-:1093C000F4B101000000004081B20100000000FE85
-:1093D000F4B101000000004081B20100000000FE75
-:1093E000F4B101000000004081B20100000000FE65
-:1093F000F4B101000000004081B20100000000FE55
-:10940000F4B101000000004081B20100000000FE44
-:10941000F4B1010046000040B39B0100FC81004014
-:1094200081320100080000DAF7F501004800004031
-:10943000959801000000004497B00100FC81004AAB
-:10944000B2330100000000DAF7B10100080000DAD1
-:10945000F7F501000000004295C001008582A2419D
-:10946000975000002A000040A59B010040160040D4
-:10947000A19B0100000000CAA7B30100758000BBDA
-:10948000853001000281004081B20000A7822245A0
-:10949000FD7F0000E0150040479901001A0000A27E
-:1094A00080DC010000000050F1B10100F015004027
-:1094B000F1990100000000CAF1B10100070000406D
-:1094C00061990100A000004062DD01009682A8BB06
-:1094D000E13100000000005083B001009982A241F8
-:1094E000835000009882A2F282300000E1800040A8
-:1094F000813201009F82A240976C0000280000404A
-:10950000B39B0100A082004081B20000280000400F
-:10951000B39B0100F015004043990100FC8100401D
-:1095200081320100A782A2FAB46F0000FC810042E0
-:10953000B3430100A782A2FAB46F0000FC8100428D
-:10954000B3430100AA8222FAB46F0000A78242400E
-:10955000813200000000004E699301000481005830
-:109560006993000040160040459901003582004093
-:1095700049310100F6150040439901005C16004096
-:109580004599010000006EFA8EB001000000004015
-:1095900081B20100000000FEF4B1010000000040B3
-:1095A00081B20100000000FEF4B1010000000040A3
-:1095B00081B20100000000F0B4B30100B882A24003
-:1095C0008F6C0000FC152020E1B10100BD8200403D
-:1095D00081B20000DB82004081320100BD82224066
-:1095E000976C0000BA824240813200000000004FB8
-:1095F000699301000481005869930000348200409F
-:10960000813201001E000048B2CB0100FC81004005
-:1096100081320100C2822250B56F0000000000506C
-:1096200091C0010000000048B2CB0100F6150040D7
-:1096300043990100FF8100F2B433010002000048A9
-:10964000B2CB0100F815004043990100FF8100F200
-:10965000B433010004000048B2CB0100FA15004009
-:1096600043990100FF8100F2B43301000800004873
-:10967000B2CB0100FC15004043990100000000F04E
-:1096800094B00100FFFF004AB48B0100FF8100404D
-:10969000813201000A000048B2CB01001000004AEC
-:1096A000B4F70100FF8100408132010034820040A4
-:1096B000813201001E000048B2CB0100FC81004055
-:1096C00081320100D8822250B56F0000D98200504B
-:1096D000B5B3000000000040B5B30100FF810040B9
-:1096E000813201000281004081B20000001600407A
-:1096F0004799010030310040F599010032330040B4
-:10970000F599010034350040F599010036370040E5
-:10971000F599010038390040F599010041420040B7
-:10972000F599010043440040F59901004546004089
-:10973000F599010047480040F5990100494A004069
-:10974000F59901002C0000408398010000000040C2
-:10975000F7B10100E782A2418350000080162E0677
-:1097600083B00100360000FBF6A90100EA82A241A5
-:10977000835000002200004083980100000000FB9D
-:10978000F6B10100ED82A24183500000620000406A
-:1097900095980100008300408132010000162D06DB
-:1097A00083B0010080160040459901005C0000FB79
-:1097B000F6A90100F382A24183500000000000706E
-:1097C000F9B1010000000071F9B101000000007260
-:1097D000F9B1010000000073F9B10100000000744C
-:1097E000F9B1010054000040959801000083004049
-:1097F000813201000000007095B00100FF822270EC
-:10980000B56F00000000804197B00100000080406B
-:1098100097B00100456700A6E0B201000123007087
-:10982000E19A0100CDEF00A6E2B2010089AB007120
-:10983000E39A0100BA9800A6E4B20100FEDC0072CF
-:10984000E59A0100321000A6E6B2010076540073DA
-:10985000E79A0100D2C300A6E8B20100F0E100746B
-:10986000E99A01008016004A44C90100000000077F
-:1098700081B001000000004A80D0010000000040DB
-:10988000F7B101000D83A241815000008016004A0B
-:1098900044C90100FC162A47E7B501000300004A4D
-:1098A000E8E50100000000408DB0010050030040D9
-:1098B000A399010080163D468DE001000000005094
-:1098C00089B00100000000FC40B001000000004130
-:1098D000A3C101001683A24189500000000000705E
-:1098E000EBB2010000000071EDB201000000007257
-:1098F000EFB2010000000073F1B20100000000743B
-:10990000F3B201000000004083B001000F000041ED
-:109910008088010050030040A2C901003383A05099
-:10992000836C00000D00004098C801000000004F4B
-:10993000998401005003004CA2C9010000000020DE
-:1099400086B001000800004098C801000000004FE8
-:10995000998401005003004CA2C9010000000020BE
-:1099600086A401000200004098C801000000004FDA
-:10997000998401005003004CA2C90100000000209E
-:1099800086A4010050030040A2C90100000000436A
-:1099900040A401000100002088E401000000005FF5
-:1099A00041F00100000000444094010005000075F2
-:1099B00089E401001B00007585F4010000000044EB
-:1099C000849401003D83A353836C00000000007663
-:1099D00089B0010000000077898401000000007652
-:1099E0008BB00100000000208BA401000000007873
-:1099F0008B8401004C8300458894000027000041BF
-:109A000080CE01004283AA4081320000000000762F
-:109A100089B001000000007789A401004C83007820
-:109A200089A400003B00004180CE01003F83AA4092
-:109A3000813200000000007689B00100000000774C
-:109A400089840100000000768BB0010000000078DE
-:109A50008B8401000000004588940100000000771D
-:109A60008BB00100000000788B8401004C8300451E
-:109A7000889400000000004484C0010000000079C8
-:109A800085C001000000002084C001005383A3535F
-:109A9000836C0000825A00A684C0010099790042BC
-:109AA00084C801006083004081B2000027000041AB
-:109AB00080CE01005883AA4081320000D96E00A6F2
-:109AC00084C00100A1EB004284C801006083004013
-:109AD00081B200003B00004180CE01005D83AA40BE
-:109AE000813200001B8F00A684C00100DCBC004254
-:109AF00084C801006083004081B2000062CA00A6F1
-:109B000084C00100D6C1004284C8010060830040C7
-:109B100081B2000000000078F3B20100000000777D
-:109B2000F1B201001E00007689E401000200007617
-:109B3000EFF6010000000044EE9601000000007501
-:109B4000EDB2010000000042EAB201000000004155
-:109B500083C001004F00004180CE01001F832A40D6
-:109B60008132000000000075E1C2010000000076B3
-:109B7000E3C2010000000077E5C2010000000078A8
-:109B8000E7C2010000000079E9C2010013838141AE
-:109B90008D4000000000804081B201009D83A24BF7
-:109BA000B76F00009D83A2412F7D00000000005090
-:109BB000FD930100401600404599010035820040A8
-:109BC000493101009C8322408F6C0000080000484E
-:109BD000B2CB0100FE81004081320100DB820040F7
-:109BE000813201009C83A240976C00005E16004009
-:109BF000439901007C1620F6E0B10100000000400E
-:109C000031B301008083224F8F7C0000000000519F
-:109C1000FD930100828322408F7C000086830054E4
-:109C2000FD930000848322428F7C000000000052DC
-:109C3000FD930100868322418F7C000000000053C9
-:109C4000FD9301009A832251FD7F00003482004081
-:109C5000813201000C000048B2CB0100FC810040C1
-:109C6000813201009583A240B56F00001E000048BC
-:109C7000B2CB0100FC81004896300100000000DA00
-:109C800097C001000400004BB2CB0100FC810040F2
-:109C9000813201000E000048B2CB0100FF8100407C
-:109CA000813201000C000048B2CB010000000030FE
-:109CB000B5B30100FF810040813201000E00004871
-:109CC000B2CB0100FC810040813201009983224027
-:109CD000B56F00009D830054FD930000000000510B
-:109CE000FD8301001C0000FE7FD901009D83A6407A
-:109CF0008132000000000055FD930100000080400B
-:109D000081B20100B6030040A199010000002F417B
-:109D100099B30100A8832244816C0000B0832248DB
-:109D2000816C0000AA83224C816C0000B483225015
-:109D3000816C0000B5832254816C0000B7832258E7
-:109D4000816C0000BC83225C816C000055010040E6
-:109D500081B20000000000BC09B001006A8400CAA2
-:109D600001B000000000004003B00100000000410D
-:109D7000F3830100AE83A242056C000000000041A5
-:109D800005B001006A8422CA071400006A840045F5
-:109D9000F39300006A842043956F00006A8480CAB0
-:109DA000053000006A842201803000006A8400CB04
-:109DB000DB9100005C0100BCABB30000000000BC04
-:109DC000B1B301006A8400CACFB30000FF0000CA2B
-:109DD000818801006A84A240747D000060002040F8
-:109DE00060990100B983A8B182300000B8830040B7
-:109DF00081B200006A8400CA79B300000000004EFE
-:109E000081B0010000000043CB8301000000454009
-:109E100081B20100BF83A241815000000000454093
-:109E200081B201000000454081B20100CA839182E5
-:109E3000823000000000008A80B00100B69F004020
-:109E400080CE0100C883A64081320000CA835640FC
-:109E500081B20000B6030040A19901000000005348
-:109E600007900100B6030040A199010000000052D4
-:109E700007900100F39F00418BB300000000004EEB
-:109E800081B0010000000042CD8301000000464087
-:109E900081B20100CF83A241815000000000464002
-:109EA00081B201000000464081B20100DA83918155
-:109EB000823000000000008980B00100B69F0040A1
-:109EC00080CE0100D883A64081320000DA8355405D
-:109ED00081B20000B6030040A199010000000052C9
-:109EE00007900100B6030040A19901000000005353
-:109EF00007900100F39F00418BB30000B1030040C5
-:109F0000A1990100C4142F4099B301005C010040E5
-:109F100049B1000058152D408DB00100D0142DF02E
-:109F200088B00100000000408FB00100010000A6D1
-:109F300090B0010000F80048909801000000004532
-:109F400093B00100000000FA8AB001006A030040EB
-:109F500081320100020000A680B00100EC832240A3
-:109F6000826C0000F0830040813201004703004012
-:109F700081320100000000418DC00100F583225FA5
-:109F80008D6C0000E783A24193500000E583004000
-:109F900081B20000FF070047848801000000A6404E
-:109FA00081B20000F59F00478030010000020047A9
-:109FB0008EC80100F083004081B200000000004420
-:109FC00050B30100FB832018896C0000040000A638
-:109FD00084B00100200000A686B0010000100040FF
-:109FE000559B0100FE83004081B20000040000A6E2
-:109FF00084B00100200000A686B0010000100040DF
-:10A00000559B01000000004250D30100000000A851
-:10A010004FB30100000000434ED301005E03004037
-:10A02000813201006C03004280300100F083004067
-:10A0300081320100078422A78F6C00004903004091
-:10A04000813201000484004081B2000000008040A1
-:10A0500081B20100A0942E4397B00100000000409F
-:10A06000F1B101000984A2419750000050952040B1
-:10A07000E1B10100AC942E4397B001000000004014
-:10A08000F1B101000D84A241975000000000804012
-:10A0900081B20100AE030040A3990100000000401E
-:10A0A00081B0010060150040859801000800004063
-:10A0B00040E40100000000594194010000000050FC
-:10A0C00041E0010000000042409401000000004116
-:10A0D00081C001000000A341816C0100000000412B
-:10A0E000A3C101001384005085C000004984A2412F
-:10A0F000017D000021842258737D0000780000401B
-:10A10000619901001C84A8B19C30000030003845E2
-:10A110009DE001000100000E10C90000218433C43D
-:10A12000813000002484A1AD9D2000001B841340D9
-:10A1300081B200000000134E5A8301003000384500
-:10A140009DE001002C8422AB800400002A84A24000
-:10A15000017D00002C84225F577D0000278A00408B
-:10A1600081B200002C84225E577D00008A8A004064
-:10A1700081B2000031842254737D000074000040DD
-:10A18000619901002C84A8B1003000000086A25F14
-:10A19000017C00006289004081B200003384A25F2C
-:10A1A000592700003584A25C737D00003C84A25EC8
-:10A1B000737D00004684225C737D00004784374035
-:10A1C000813200007C000040619901003684A8B112
-:10A1D000363000007C000040619901003884A8B14D
-:10A1E000003000001F000000028801002F86174089
-:10A1F00081B2000047843440813200007E0000407C
-:10A20000619901003D84A8B11230000044845221BC
-:10A2100013040000000014412FC30100FF3F000998
-:10A22000008C01000000004301F00100878400342D
-:10A2300013840000FF3F1409008C0100E7840043F1
-:10A2400001F000000000004081B20100478433406B
-:10A25000813200001B84134E5A930000EC89A248FF
-:10A26000FD7F00004E842259737D0000790000407C
-:10A27000619901004A8428B17E3100004B8400407E
-:10A2800081B20000528421AC9C20000000000041FB
-:10A290001FC301000400A05F9D6C00000000004E81
-:10A2A000589101005684225A737D00007A000040C4
-:10A2B000619901005384A8B17E310000010000CFF4
-:10A2C00011C900005C84A240937F00005C8422449A
-:10A2D000937F0000588442A5803000005B84A24038
-:10A2E000937F000071841A409393000000001A408D
-:10A2F00081B201009A80A240737D0000A1892244AE
-:10A30000216F000098892240657D0000A689A25B2C
-:10A31000737D00000400A249337D0000668422485A
-:10A32000337D0000FF01009980D80100000000503B
-:10A3300081E00100A8982F4033B1010000000040E7
-:10A34000E0C1010069842240AF6F000069842240AF
-:10A35000816F0000F5891FA5826F000049840040CD
-:10A3600081B200001B8400408BB300000000005845
-:10A3700061B101000000004E62B101001B84284061
-:10A38000813200006C84004081B200006F84334051
-:10A390001F3000001B84134E5A9300007384A0CE1C
-:10A3A000815000008584A0CD816C0000000000A5D4
-:10A3B0009CB30100000000B181B00100858422B58A
-:10A3C0008114000080152F4049B10100778442407C
-:10A3D00081320000000060B465970100D0152E4066
-:10A3E00069B3010000001A44938301001A0000A21F
-:10A3F00080DC010000000044F1B10100000000B168
-:10A40000F1B10100000000B5F1B10100050000400C
-:10A41000619901000000004062B101008084A8A1A0
-:10A42000E03100005C8400889EB300005C84A2419F
-:10A43000676F00005C84006FDB9100008584424000
-:10A44000813200005C841A40938300000099000967
-:10A4500046C901003F0000F30C8801009084A64229
-:10A460001360000055970095033001008B84454030
-:10A470008132000075000040619901008C84A8B110
-:10A480000C3000005C971D1094300100918400583E
-:10A490001F9000004E970095033001001B84008838
-:10A4A0001CB0000000002D0348B1010004002DF095
-:10A4B0002EB00100EE070040979801009884234BCE
-:10A4C000E46D00009884224BFD7F000000000040F6
-:10A4D0001F90010022002F4081B201009B8483174E
-:10A4E0008032000026000040479901009D848517B6
-:10A4F000803200000000004847C10100A3842255BB
-:10A500002F7C00000000004243D101000F0000FA40
-:10A51000968801000000004297E001000000004220
-:10A5200097D00100A484004B44C10000120000A297
-:10A5300044C90100280000F602CC01000A0000A175
-:10A5400042C90100000000F816B00100000028F028
-:10A5500010B00100000000F01AB00100000000A2DD
-:10A560002AB00100C0283C460DE0010000002D4447
-:10A5700095B00100B084A2F80E300000C0842241E2
-:10A580009550000000002D5049C10100AC840040EE
-:10A5900081B20000AD84A2F8166C0000AD84A2F870
-:10A5A000106C0000AD84A2F01A6C0000BE8422582A
-:10A5B0001F7C000000993F4213F00100B584474022
-:10A5C00081320000B984A2F3740600000000000686
-:10A5D000E6950100BE841F4081B200000000000625
-:10A5E00096B001003F001FF30C88010000000055E9
-:10A5F00061B101000000004B62B10100BC84A840C1
-:10A6000081320000BE84474081320000C6841F4171
-:10A610002DC30000C48422581F7C00000000005598
-:10A6200061B101000000000662B10100C284A840CF
-:10A6300081320000C484474081320000EE841F4113
-:10A640002DC30000030000071AF401002196000743
-:10A6500016300100D5842241816C0000CC84224256
-:10A66000816C00001B8400881CB00000D484225F31
-:10A670000F7C00001597005F01100100D28422407A
-:10A68000956C00000480000342C90100000000F244
-:10A6900002B001008A960052953001009196004B5D
-:10A6A00002B000006797000996300100058A00405B
-:10A6B0000FB00000DD84A25A1F7C00009B95004073
-:10A6C00081320100DD842220856C0000DA849C0F39
-:10A6D000803200001B8400881CB000007C96005C67
-:10A6E0001F0001009B980042613101001B8400881B
-:10A6F0001CB00000E69900079630010000002D050F
-:10A7000048B10100E08482F0183000006C8B0045F5
-:10A710008FB00000282000A696B00100E484221724
-:10A72000960400000B98004B953001006C8B004B99
-:10A730008FB000002197000348310100FC940040D5
-:10A74000813001006C8B004081B2000000002E10AF
-:10A7500048B101000000685003B001000000000390
-:10A76000F0B101000000004261B1010000000010E2
-:10A7700062B10100EB84A800E03100001B84008876
-:10A780001CB0000000002D0348B101000000004093
-:10A790000FB00100000000F82EB00100000000F230
-:10A7A00002B001000000004017B00100004100A607
-:10A7B00096B00100EE072E47979001000185221701
-:10A7C00096040000FF84224BFD7F0000FF8423A23B
-:10A7D000026C00008A96005295300100040022416C
-:10A7E000975000000C002D0012B00100000000F096
-:10A7F00000B001000000005C018001009196004B58
-:10A8000002B000000000000900B00100000000508C
-:10A8100003B001001E85005C1790000013852243E1
-:10A820002F7C0000000000451F9001000C85225F76
-:10A830002F7C000000002E1048B1010000000058DD
-:10A84000F1B1010010000003F0C901001000000088
-:10A85000E0C9010008854542613100000000001098
-:10A8600062B101000985A840813200001B841D8867
-:10A870001CB0000020002D0348B10100FF0F00F6BE
-:10A88000808801001085A2A6816C0000138500F26B
-:10A890003AB00000FD85A24BFD7F0000E29500402C
-:10A8A000813201001B8A004081B200001E85224ACD
-:10A8B0002F7C00001E8522482F7C00000A002D03FB
-:10A8C00048B101003F0000F2868801001F000043EC
-:10A8D000848801000500004380F4010098943D4203
-:10A8E00081E001001E85A242E07D0000FD85A24BB3
-:10A8F000FD7F0000E2950040813201001B8A00408C
-:10A9000081B200001E85474081320000000000A394
-:10A9100009B0010000001F4147C30100248522A1A6
-:10A92000096C00006B8400881CB0000021850003C6
-:10A9300048B100005E85A392036C00000A990040B4
-:10A94000953001000000004143C3010000000016E3
-:10A9500080B201001B8A2708803200002B85225C10
-:10A96000177C00002C8500002AB0000012000000B7
-:10A970002AC801000200000880C801003085A243F7
-:10A980002F7C00000E980040813201004C85005E53
-:10A9900017900000040000018CCC01000E98004CC0
-:10A9A0000330010000002E4602B00100100000102C
-:10A9B00048C901000C000001F0CD01002C0000404E
-:10A9C000F0C9010000000016F0B1010010000015F0
-:10A9D000E0C901000000004361B10100A00000A433
-:10A9E00062DD01003985A854171000004C85005E17
-:10A9F00017900000120000002AC801004B85224376
-:10AA00002F7C0000040000018CCC01000000004CF1
-:10AA100003B001002F9800436131010000002E4671
-:10AA200002B001001000001048C901000C00000134
-:10AA3000F0CD01000C000009F0C901000000001871
-:10AA4000F0B1010010000015E0C901000000004352
-:10AA500061B10100A00000A462DD01004C85285412
-:10AA6000171000004885004081B200002F98004375
-:10AA7000613101004E8522502F7C000000000056FD
-:10AA80001790010007000017988801005185A24126
-:10AA9000996C000000000055179001000000004371
-:10AAA00061B101004000001062DD01005285A84044
-:10AAB000813200001B8400881CB000001698004002
-:10AAC00081320100598522432F7C0000168000034B
-:10AAD00044C901000000001DE4B10100B797005E09
-:10AAE000051001005C85A25F2F7C0000CE94000160
-:10AAF00038430100E2950040813201001B8A00408A
-:10AB000081B200006085A24BFD7F0000FA85004104
-:10AB100043C300000000004027B0010000000040D7
-:10AB20002DB001000000004011B001006385350127
-:10AB3000863000006D000040619901006B8528B1EE
-:10AB4000303000006485224D757D00000000001645
-:10AB500080B20100EA85A740116C000000000041AE
-:10AB600043C30100F985004081B200006D00004040
-:10AB7000619901006B85A8B1123000000000001639
-:10AB800080B201007585A740116C000000000041F3
-:10AB900043C301000000000910B0010000000018CC
-:10ABA0002CB00100DE07004380CE01006485AA407E
-:10ABB000813200007A85004081B2000040003E43AF
-:10ABC00027E0010000000009F0B1010000000018BA
-:10ABD000E0B101000000004127C001006485A30B23
-:10ABE00087500000000015401BB00100000000402D
-:10ABF00023B00100120000002AC8010040002D40CF
-:10AC000039B001008285A240276C000022000008B4
-:10AC100012C80100DE07004025980100858500402C
-:10AC200081B20000000000F812B00100000000F046
-:10AC300030B001000000000B25B001000000001042
-:10AC400032B0010014002001E0B10100EE07004025
-:10AC5000379801008A852301366C0000000000014E
-:10AC600036B001009585824123400000208000100D
-:10AC700042C9010091852240E36D000000000043BD
-:10AC800061B101004000001062DD01008E85A84026
-:10AC9000813200001B8400881CB000000196004334
-:10ACA000233001000000001032B00100000000411C
-:10ACB00023B001000000000348B10100008000192A
-:10ACC00044C90100A48522451F7C00000000004CFF
-:10ACD000F1B1010000000009F0B10100000000180E
-:10ACE000F0B101000000004361B101002000001933
-:10ACF00062DD01009B85A815E031000000000050D6
-:10AD000003D001000000005033C001000000004CDF
-:10AD100025D001000C002D4C13C001000000005094
-:10AD200037D00100000000502BC001008A8500458B
-:10AD30001F800000A685A312366C0000A785681B43
-:10AD400028B000000000681228B0010000000009CF
-:10AD5000F0B1010000000018F0B101000000004354
-:10AD600061B101002000001962DD0100AA85A8156B
-:10AD7000E0310000D0852214025000000000005095
-:10AD800033C001000000001424D001000C002D1479
-:10AD900012C00100C985A21436500000BA85225C99
-:10ADA0001F7C00003080001042C90100B88522409D
-:10ADB000E36D00000000004261B10100400000109E
-:10ADC00062DD0100B585A840813200001B84008847
-:10ADD0001CB000000000000348B101000C002D5C15
-:10ADE0001F800100100000F02AC801000000005C74
-:10ADF0002B800100F007004037980100BF85230138
-:10AE0000366C00000000000136B00100CA85221B2C
-:10AE1000026C00003000001048C9010000002E5CE8
-:10AE20001F90010000000050F1B10100000000037C
-:10AE3000F0B10100FF070015E08D010000000042A5
-:10AE400061B10100A00000A462DD0100C685A84038
-:10AE500081320000CA85000348B1000000000014E0
-:10AE60002AC001008A85A240256C00000000004134
-:10AE700039C0010040003D4339E001000000000BF3
-:10AE800025B00100000000F812B001008A8500F032
-:10AE900030B000000080001942C90100D685224070
-:10AEA000E36D00000000004361B1010040000019A3
-:10AEB00062DD0100D385A840813200001B84008838
-:10AEC0001CB00000019600402B30010018002E033A
-:10AED00048B10100DA8522502F7C000000000056A6
-:10AEE000179001000700001798880100DD85A24136
-:10AEF000996C00000000005517900100E085224386
-:10AF00002F7C000000000054179001001600201D47
-:10AF1000E4B10100E285A340276C0000E485605F96
-:10AF2000179000000084000B16DC01000000601385
-:10AF300016940100B797005E051001001B8AA25FFE
-:10AF40002F7C00001480000342C90100000000F2C1
-:10AF500002B00100CE940001384301001B8A00407A
-:10AF600081B200000000004083B001000000004DED
-:10AF700061B101000000001662B10100EC85A8403B
-:10AF8000813200000000000862B10100EE85A84097
-:10AF900081320000F9852213826C000040003D439D
-:10AFA00083E00100000000F810B00100000000F094
-:10AFB0002CB001000000001662B10100F485A84029
-:10AFC000813200000000000862B10100F685A8404F
-:10AFD00081320000F085004183C000000000154070
-:10AFE00081B20100008200A604B00100A0980040D8
-:10AFF00047990100E9890041893001008A96005291
-:10B00000953001009196004B02B000001B8A004071
-:10B010000FB000000000005F018001001000000080
-:10B020000EF401003F00000000880100030000074B
-:10B030001AF4010021960007163001000B86224108
-:10B04000816C000009862242816C00001B8400880C
-:10B050001CB000000A86225F0F7C0000058A0040B9
-:10B060000FB000001386A25A1F7C00009B95004081
-:10B070008132010013862220856C000010869C0F0F
-:10B08000803200001B8400881CB000007C96005CAD
-:10B090001F0001009B980042613101001B84008861
-:10B0A0001CB00000E69900079630010000002D0555
-:10B0B00048B10100000000F018B001001986223AE2
-:10B0C000016C0000000000008EB001006C8B00409D
-:10B0D00001B000000000004081B201002E002D05EB
-:10B0E00048B101001D86A240E76D00000A00004043
-:10B0F0008F9801006C8B004001B000006695004005
-:10B10000813201004E970095033001001B840088B6
-:10B110001CB0000000002D0348B1010022002DF0FA
-:10B120002EB00100282000A696B001002686221726
-:10B13000960400000B98004B953001006C8B004C7E
-:10B140008FB0000028868317803200000000004482
-:10B1500043C101002A8685178032000000000048A4
-:10B1600043C10100280000F602CC0100120000A13A
-:10B170002AC801002197004081320100FC9400415F
-:10B18000813001006C8B004081B2000000000001A2
-:10B1900000D0010000002E1048B10100280000403E
-:10B1A000F199010000000003F0B10100000000006F
-:10B1B000F0B1010034864647613100000000001004
-:10B1C00062B101003586A81BE03100001B841E8897
-:10B1D0001CB000000000004503E0010008002D0342
-:10B1E00048B101005A8601FB08300000AD8687FB9C
-:10B1F00022300000000000FA0EB00100000000F84C
-:10B2000014B00100030000071AF4010021960007A2
-:10B210001630010050862241816C00004486224293
-:10B22000816C00001B8400881CB000004F86225FE8
-:10B230000F7C0000380000047E8901004886A65F6C
-:10B240000F00000074950040053001004D8600405D
-:10B2500081B20000130000408798010000002D0318
-:10B2600048B101000C002DF082B00100000000F098
-:10B2700084B0010000970040053001000000005C30
-:10B280001F900100058A00400FB000005886A25AA6
-:10B290001F7C00009B9500408132010058862220CF
-:10B2A000856C000055869C0F803200001B8400884E
-:10B2B0001CB000007C96005C1F0001009B980042BF
-:10B2C000613101001B8400881CB00000E699000772
-:10B2D0009630010000002D0548B10100000000F08B
-:10B2E00018B001005C862104802000005D860040CB
-:10B2F00010C90000AE8A004B81B000007C8600437C
-:10B3000081B00000808600FB22B00000AE8A0041C0
-:10B3100081B000006C8B004E8FB000007886005A20
-:10B320008FB00000658600478FB00000AE8A0053E2
-:10B3300081B00000AE8A005681B0000032002D05B9
-:10B3400048B101006C8BA00AE46D00006B86A2413D
-:10B35000197C00006A86220A803200006C8B005340
-:10B360008FB000006C8B00548FB000007486220AEE
-:10B37000803200006E86A20AE46D00006C8B005DD6
-:10B380008FB00000000000F280B001000000000A51
-:10B3900080D001007286A091816C00006C8B005EF1
-:10B3A0008FB00000250000408F9801006C8B00409A
-:10B3B00081B2000076862091E56D00006C8B005410
-:10B3C0008FB00000210000408F9801006C8B00407E
-:10B3D00081B2000032002D0548B101006C8BA00A3B
-:10B3E000E46D0000240000408F9801006C8B004049
-:10B3F00081B2000037002D0548B10100040000F3C0
-:10B4000082F40100AE8AA042836C0000AE8A005430
-:10B4100081B00000000000F20EB001000300000740
-:10B420001AF4010000B5000D42C901000700000731
-:10B43000168801008986220BE67D00000A00004084
-:10B4400087980100559900408132010000000040BA
-:10B450000FB00100058A005C1F9000009B862250FF
-:10B46000FD7F00009686A254FD7F00008E86225547
-:10B47000FD7F000082000040879801008686004022
-:10B4800081B2000086862253FD7F000014800003F5
-:10B4900042C90100000000F096B001001000004B0E
-:10B4A00080F401000CBC004087980100968622437E
-:10B4B000806C0000FFFF004B808801008686A2435D
-:10B4C000806C00007C9600404799010097864340BD
-:10B4D000813200009A86A0F0306F00008C861B40FD
-:10B4E00081B2000000001B4131C30100A59500405E
-:10B4F000253001009F869C0F803200001B8400884D
-:10B500001CB000007C96005C1F000100148000034A
-:10B5100042C90100000000F096B0010000002F05B4
-:10B5200048B101001000000718E401000008000CF9
-:10B53000E0990100E69900079630010000B5000D82
-:10B5400046C90100A6863040813200000000000B91
-:10B55000E6910100000200A146C901000000000BB5
-:10B56000E691010004002E0548B1010000001040E2
-:10B57000E1B10100AE8A004081B00000000000FB94
-:10B5800028B00100000000FB86B00100000000F8B8
-:10B5900014B00100B7862246237C0000B386224007
-:10B5A000877C0000000000481F900100B586224102
-:10B5B000877C0000000000471F900100B7862242F0
-:10B5C000877C0000000000451F900100B786471BE4
-:10B5D0002C300000000000A013B0010000001F414B
-:10B5E00041C30100E6862392156C0000E686A24561
-:10B5F0001F7C0000EA86224BFD7F0000170000D070
-:10B60000A2C901000000004027B001000200000AAA
-:10B6100024C80100DD9500400F300100E4862208B7
-:10B620004030000000000041A3C10100F0070012FB
-:10B6300024CC0100C086AA4127400000010000136D
-:10B6400080CC0100E086264023300000000000404E
-:10B6500083B001006000000384C8010010000010E6
-:10B6600048CD0100170000D0A2C90100CD86A2403C
-:10B67000836C0000D986004183B000000080004246
-:10B6800044990100000068213896010000002E5006
-:10B6900049C10100D286A244236C0000300000039F
-:10B6A00048C9010000000044F1B101000C00002075
-:10B6B000F0C901000000004461B10100A00000A435
-:10B6C00062DD0100D586A842E031000000000044A0
-:10B6D00085C001000000004123C0010000000041BE
-:10B6E000A3C10100CB86A24181500000E086224028
-:10B6F000236C00000000004461B101004000001014
-:10B7000062DD0100DD86A840813200001B840088D4
-:10B710001CB000000000000348B10100EE0700402B
-:10B7200025980100170000D02AC80100F3860017F1
-:10B7300010B00000C097004081320100EA8600404E
-:10B7400081B20000DD95009225300100000000402C
-:10B7500031B00100EA8622082E300000F386004155
-:10B7600027B00000808000A604B001000600004061
-:10B77000879801005599000A8C30010000000040B4
-:10B780000FB001000000005C1F900100F286229FB4
-:10B79000136C0000020000881CCC01006B84004088
-:10B7A00081B20000058A00413FC300000000004054
-:10B7B0000FB001002800000180CE010007872A4059
-:10B7C000813000000080001044C9010040000040AA
-:10B7D00081980100FC86A2481F7C0000FC86A247DD
-:10B7E0001F7C0000FC86A307036C00008000004063
-:10B7F00081980100FF86A340026C00002800000130
-:10B80000F0CD0100018700400FB00000280000408B
-:10B81000F0CD0100040000400ECC01002800000320
-:10B82000F0C9010028000000F0C901000000001666
-:10B83000E0B101000000004761B1010020000010EC
-:10B8400062DD01000587A85C1F10000000000040B9
-:10B8500043990100000000F008B00100A0012D4054
-:10B8600000C00100ED88220F4205000018879C0FE0
-:10B87000803200000000005C1F800100008000108A
-:10B8800042C9010013872240E36D00000000004719
-:10B8900061B101004000001062DD01001087A84086
-:10B8A000813200001B8400881CB00000188722072A
-:10B8B000803200000000000342B1010000000007D8
-:10B8C00042C10100008000A1469901000000005F14
-:10B8D000E1910100D787A2451F7C00001000000302
-:10B8E00048C9010000002D5429C00100000000F8E3
-:10B8F00018B00100000000F804B00100000000F8DA
-:10B900000EB00100420000030AC801000C0000A4B0
-:10B910000CC801000000004017B001000000001436
-:10B9200002B001000000001424D001000000001447
-:10B9300010C001001200000810C801000000004003
-:10B9400023B00100FE7F000544C90100298720942F
-:10B95000156C00002A870094E5B100000000000A81
-:10B96000E4B10100438722018032000000003C4422
-:10B9700023E0010000002EA480B0010000000010B0
-:10B9800048C101003087A307026C000031876801BD
-:10B990001AB00000000068071AB001000000000D96
-:10B9A00002D0010000000005F0B101000000000C11
-:10B9B000F0B1010000000002E0B101000000000D44
-:10B9C0000AC001003D872240036C00003D872242EF
-:10B9D000236C00000000004123C00100000000476C
-:10B9E00061B10100A00000A462DD0100658728406C
-:10B9F000813200003A87004081B200000000001050
-:10BA000080C001000000004761B10100000000405B
-:10BA100062B101003F87A840233000001B840088EA
-:10BA20001CB000006587004081B2000000003C446B
-:10BA300023E00100000000A486B0010000002E10E9
-:10BA400048C101004887A3120E6C000049876807AF
-:10BA50001AB00000000068121AB001004C8780087C
-:10BA6000F03100000100001198C801000000004CF6
-:10BA70001E9001000000000CF0B101000000000267
-:10BA8000E0B101000000001086C001000000004687
-:10BA900061B10100011F004362DD01005087A85C15
-:10BAA0001F1000008387220D146C00005687220DA2
-:10BAB000246C00000000000D10C001005A87000D2A
-:10BAC00024D00000000000412BC001000000001540
-:10BAD000A2B101001000002010C80100F0070040D2
-:10BAE000259801005C872242236C00006587004195
-:10BAF00023C000000000004661B1010040000010BA
-:10BB000062DD01005D87A85C1F0000001B840088C7
-:10BB10001CB000000000001048B1010063872247FC
-:10BB20001F7C000011960043233001000E00000F1F
-:10BB30001E8C01000000004023B001008387220D0D
-:10BB4000145000008287A20D0E500000718722461B
-:10BB50001F7C0000000000461F80010030800010A4
-:10BB600042C901006F872240E36D000000000047DA
-:10BB700061B101004000001062DD01006C87A84047
-:10BB8000813200001B8400881CB00000208000036C
-:10BB9000469901000000005FE191010000002D06C0
-:10BBA00048B10100000000F818B00100000000F8E2
-:10BBB00004B0010076871FF00E3000002A87004C89
-:10BBC0000DC0000000002E5F0F8001002A872307B0
-:10BBD000146C00003000001048C90100240000402F
-:10BBE000F199010000000003F0B101000000000025
-:10BBF000F0B1010000000016F0B1010024000000C7
-:10BC000000C801000000004761B10100A00000A4CD
-:10BC100062DD01007F87A8461F1000002A8700030D
-:10BC20000CB000002A87000D18C0000004002E147C
-:10BC30000AD001001200000548CD0100FE7F00057A
-:10BC400042C901000C002AF2E0B1010089872240BC
-:10BC5000316C000000006018389601001E000040A2
-:10BC600043990100008100F680CE01008D87A64037
-:10BC7000813200000000004443C101008F87220B85
-:10BC8000ED6D0000080000A142C90100020000A102
-:10BC900046C901000F0000FA948801000200004A22
-:10BCA00086E40100000000F60EB0010097872247ED
-:10BCB0001F7C000004001F430E5000009787A04621
-:10BCC0000F400000000000410FC001009B87224888
-:10BCD0001F7C00000000004091B0010004000FA292
-:10BCE000423100009E87004089B000000C0000A295
-:10BCF00042C901000000004389B001000000004378
-:10BD000095D00100000000FC82B00100A187A04195
-:10BD1000904000000000004191C00100A68722472A
-:10BD20001F7C0000A687A043896C0000A6872045E1
-:10BD3000896C0000A687A0410E4000000000004171
-:10BD40000FC001000000004189C001009E87A24190
-:10BD500095500000AF8722481F7C0000100000486B
-:10BD600092F40100FFFF004890880100AD879048E1
-:10BD7000924000000000004193C001000A0000A2B0
-:10BD800044C901000000662093A401003080001027
-:10BD900044C9010012000014F0C90100000000179E
-:10BDA000F0B1010012000005E0CD010030000010EC
-:10BDB00080C801000000004461B101002000004083
-:10BDC00062DD0100B587A84081320000C287225C95
-:10BDD0001F7C000000003C4423E0010000002D1007
-:10BDE00048C10100BF872240E36D0000000000460B
-:10BDF00061B101004000001062DD0100BC87A84075
-:10BE0000813200001B8400881CB00000C287875C60
-:10BE10001F0000000000001048B101001196004111
-:10BE200023400100C487A2471F7C000058890017E7
-:10BE300010B0000000002F0348B10100C787A00721
-:10BE4000164000000000004117C001000000000B78
-:10BE5000E4B101000000005017F00100CB8790F220
-:10BE6000164000000000004117C0010000006620DD
-:10BE700017A40100100000142AC80100000000509F
-:10BE80002BE00100000000F22A9401003080001035
-:10BE900042C90100D5872240E36D00000000004444
-:10BEA00061B101004000001062DD0100D287A840AE
-:10BEB000813200001B8400881CB000000080001745
-:10BEC00010DC01005889004081B20000A5950040B7
-:10BED00081320100DB87225C1F7C00001B8400880C
-:10BEE0001CB000007C96005C1F0001000080000573
-:10BEF00044C9010000000040E1B1010004002D032D
-:10BF000048B10100000000F03CB00100280000141E
-:10BF100002C801000000000134B0010000002D053E
-:10BF200032B00100220000050AC801001000000321
-:10BF300048C90100000000F818B00100000000F836
-:10BF400004B00100000000F80EB001000C0000A4D5
-:10BF50000CC801000000004017B0010000000040C4
-:10BF600023B00100218822018032000000003C44FF
-:10BF700023E0010000002EA480B0010000000010AA
-:10BF800048C10100F087A307026C0000F187680137
-:10BF90001AB00000000068071AB001000000000D90
-:10BFA00002D0010000000005F0B101000000000C0B
-:10BFB000F0B1010000000002E0B101000000000D3E
-:10BFC0000AC0010003882240036C0000FD87224262
-:10BFD000236C00000000004123C001000000004766
-:10BFE00061B10100A00000A462DD01003D8828408D
-:10BFF00081320000FA87004081B20000000000108A
-:10C0000080C001000000004761B101000000004055
-:10C0100062B10100FF87A840233000001B84008824
-:10C020001CB000003D88004081B2000000000010FC
-:10C0300080C001000000004761B101000000004025
-:10C0400062B101000588A840233000001B840088ED
-:10C050001CB000002200001948C9010000002D1486
-:10C0600048C101000F0000F23A88010000000042C0
-:10C070003BE001000E00001402C801000000001D9A
-:10C0800002C001001188231A02500000000000467F
-:10C0900003C001003D88000134C000000C002D1DCC
-:10C0A00048C10100F00000F23088010000000042A9
-:10C0B00031F001000000001402B001000000001D7A
-:10C0C00002C001000000001802C001001988221AF5
-:10C0D000025000003D88000134C000002200001919
-:10C0E00048C9010002002D1448C10100000000F6FB
-:10C0F00014B001000000001D14D001000000001861
-:10C1000014D001000000001E24B00100120000172E
-:10C1100010C801003D88001A10C0000000003C4417
-:10C1200023E00100000000A486B0010000002E10F2
-:10C1300048C101002688A3120E6C000027886807FA
-:10C140001AB00000000068121AB001002A888008A6
-:10C15000F03100000100001198C801000000004CFF
-:10C160001E9001000000000CF0B101000000000270
-:10C17000E0B101000000001086C001000000004690
-:10C1800061B10100011F004362DD01002E88A85C3F
-:10C190001F1000005A88220D145000005A88220DEA
-:10C1A000245000000000000D10C00100358822421C
-:10C1B000236C00003D88004123C0000000000046C1
-:10C1C00061B101004000001062DD01003688A85C0A
-:10C1D0001F0000001B8400881CB00000000000103D
-:10C1E00048B1010011960043233001000E00000FFA
-:10C1F0001E8C01000000004023B001005988A20DF0
-:10C200000E500000488822461F7C000000000046B7
-:10C210001F8001003080001042C901004688224082
-:10C22000E36D00000000004761B101004000001014
-:10C2300062DD01004388A840813200001B84008831
-:10C240001CB0000020800003469901000000005F40
-:10C25000E191010000002D0648B10100000000F846
-:10C2600018B00100000000F804B001004D881FF074
-:10C270000E300000EA87004C0DC0000000002E5F69
-:10C280000F800100EA872307146C000030000010C3
-:10C2900048C9010024000040F1990100000000039A
-:10C2A000F0B1010000000000F0B101000000001634
-:10C2B000F0B101002400000000C8010000000047A8
-:10C2C00061B10100A00000A462DD01005688A8460B
-:10C2D0001F100000EA8700030CB00000EA87000D81
-:10C2E00018C000007788A2441F7C000000000019DD
-:10C2F0000AB001002200000548C901000A002D14FF
-:10C3000048C1010002002040E5B1010004002040C6
-:10C31000E5B101000D002D1D48C10100090000F329
-:10C32000388801000D002050E7B1010004002D40C5
-:10C330003FB00100000000F432B0010004002040D2
-:10C34000E1B101002200000548C9010000002D14E0
-:10C3500048C101000200001D94F4010000000040EB
-:10C3600091B001006C88A0FC9040000000000041EA
-:10C3700091C001006A88A241955000000480000528
-:10C3800044C9010000000048F0B10100000000189D
-:10C3900048C101000200001894F4010000002D18AB
-:10C3A00090B001007488A0FC9040000000000041A3
-:10C3B00091C001007288A241955000000000004821
-:10C3C000E0B1010010002040E5B1010022000005AD
-:10C3D00048C901000000001448C1010004800005A4
-:10C3E00042C90100000000F880B00100000000F028
-:10C3F00016C001007C8842303D0700000000009E0E
-:10C4000085B0010000001A413DC301000400204234
-:10C41000ECB101000000001E82B0010002002E1DE0
-:10C4200082C001000000661882C0010000000042C6
-:10C4300080C001008688A0418044000000000041C7
-:10C4400081C001001000004092F401000A002E306B
-:10C45000818401008A8890409240000000000041E1
-:10C4600093C001000000662093A401000000001D9D
-:10C4700048C1010004002019E8B101000000001EBD
-:10C4800016C001009088A019164400000000004169
-:10C4900017C001000D002F1E32C001009588A24078
-:10C4A000156C00009488A01C16400000000000419C
-:10C4B00017C00100000063F338940100100000056C
-:10C4C00048C9010004002E1E98B001000000601A47
-:10C4D00098C001000C002040E1B10100A388224671
-:10C4E0001F7C0000000000461F800100308000100B
-:10C4F00042C90100A1882240E36D0000000000470E
-:10C5000061B101004000001062DD01009E88A8407A
-:10C51000813200001B8400881CB0000020800003D2
-:10C52000469901000000005FE19101003080001099
-:10C5300044C901001200001AF0C9010000000017F0
-:10C54000F0B1010010000005E0C90100300000104A
-:10C5500080C801000000004461B1010020000040DB
-:10C5600062DD0100A988A84081320000B788225C02
-:10C570001F7C000000003C4423E0010000002D105F
-:10C5800048C10100B3882240E36D0000000000466E
-:10C5900061B101004000001062DD0100B088A840D8
-:10C5A000813200001B8400881CB000000000005C89
-:10C5B0001F8001000000001048B1010011960041E9
-:10C5C000234001000E00000F1E8C010020002F05EB
-:10C5D00048B101000000000BE4B101000000005070
-:10C5E00017F00100BC8890F21640000000000041E6
-:10C5F00017C001000000662017A4010010000014FD
-:10C600002AC801000000001D2AC0010000000050DF
-:10C610002BE00100000000F22A940100308000109D
-:10C6200042C90100C7882240E36D000000000044B9
-:10C6300061B101004000001062DD0100C488A84023
-:10C64000813200001B8400881CB0000000800017AD
-:10C6500010DC0100E4882240156C0000CF88A24461
-:10C660001F7C0000000000441F900100CE88229F24
-:10C67000136C0000020000881CCC01006B84004099
-:10C6800081B20000000000413FC3010066990040F4
-:10C6900081320100D288A241877C00000000001E88
-:10C6A0003EC00100E4882240156C0000D588201EA1
-:10C6B000146C00000000000A3CB00100DD95001E73
-:10C6C00024300100DA8822082E30000000000052D9
-:10C6D00011C001000000001A10C001003D88004098
-:10C6E00017B000006B8400881CB00000DD9500408E
-:10C6F00081320100D788A2082E300000808000A679
-:10C7000004B001000600004087980100008000038B
-:10C710004499010004002204E03100005599001FF3
-:10C720008C300100000000400FB00100058A005C61
-:10C730001F900000008000034499010004002204BF
-:10C74000E03100006699004081320100E988A24191
-:10C75000877C0000EA88001E3EC000000000001F29
-:10C760008CB001000000004005B001005599004068
-:10C770000F300100058A005C1F900000F5889C0FB7
-:10C78000803200000000005C1F800100008000106B
-:10C7900042C90100F5882240E36D00000000004717
-:10C7A00061B101004000001062DD0100F288A84084
-:10C7B000813200001B8400881CB00000FA88220728
-:10C7C000803200000000000342B1010000000007B9
-:10C7D00042C10100008000A1469901000000005FF5
-:10C7E000E191010004002E0348B10100FD8820946E
-:10C7F000156C0000FE880094E1B100000000000A02
-:10C80000E0B1010001892240316C00000C000040C1
-:10C8100045990100000060183896010000002E10B4
-:10C8200048B1010000000050F1B101000000000813
-:10C83000F0B1010000000003E0B10100000000447D
-:10C8400061B101000000001062B101000689A8403A
-:10C85000233000001B8400881CB0000000002D5213
-:10C8600011C001001000000348C90100000000F8D9
-:10C8700018B00100000000F804B00100000000F84A
-:10C880000EB001000C0000A40CC8010000003C44E4
-:10C8900023E00100000000A486B0010000002E107B
-:10C8A00048C101001489A3120E6C000015896807A5
-:10C8B0001AB00000000068121AB001000000001059
-:10C8C00086C0010000000008F0B101000000000C6B
-:10C8D000F0B1010000000002E0B1010000000046DC
-:10C8E00061B10100011F004362DD01001A89A85CEB
-:10C8F0001F1000004B89220D146C00002089220DAE
-:10C90000246C00000000000D10C001002489000DFF
-:10C9100024D00000000000412BC0010000000015E1
-:10C92000A2B101001000002010C80100F007004073
-:10C930002598010026892242236C00002D890041A0
-:10C9400023C000000000004661B10100400000105B
-:10C9500062DD01002789A85C1F0000001B8400889D
-:10C960001CB000000000001048B10100D794004343
-:10C97000233001000000004023B001000400220D1C
-:10C98000145000004A89A20D0E5000003989224639
-:10C990001F7C0000000000461F8001003080001056
-:10C9A00042C9010037892240E36D000000000047C2
-:10C9B00061B101004000001062DD01003489A8402F
-:10C9C000813200001B8400881CB00000208000031E
-:10C9D000469901000000005FE191010000002D0672
-:10C9E00048B10100000000F818B00100000000F894
-:10C9F00004B001003E891FF00E3000000F89004C8A
-:10CA00000DC0000000002E5F0F8001000F8923077A
-:10CA1000146C00003000001048C9010024000040E0
-:10CA2000F199010000000003F0B1010000000000D6
-:10CA3000F0B1010000000016F0B101002400000078
-:10CA400000C801000000004761B10100A00000A47F
-:10CA500062DD01004789A8461F1000000F8900030E
-:10CA60000CB000000F89000D18C000005489225C32
-:10CA70001F7C00000000005C1F80010000003C449F
-:10CA800023E0010000002D1048C10100548922401C
-:10CA9000E36D00000000004661B10100400000109D
-:10CAA00062DD01005189A840813200001B840088AA
-:10CAB0001CB000000000001048B10100D7940041F4
-:10CAC000234001000000001710B001005889004009
-:10CAD0002BB0000000800003449901000000000416
-:10CAE000E0B101005D89229F136C00000200008804
-:10CAF0001CCC01006B84004081B2000066990041AB
-:10CB00003F430100000000408DB0010000000040E4
-:10CB100005B00100559900400F3001001B8A005CF0
-:10CB20001F900000100000000EF401000000003A09
-:10CB300001840100030000071AF401002196000798
-:10CB4000163001006C892241816C00006A89224202
-:10CB5000816C00001B8400881CB000006B89225F80
-:10CB60000F7C0000058A00400FB000007489A25AB3
-:10CB70001F7C00009B9500408132010074892220B7
-:10CB8000856C000071899C0F803200001B84008836
-:10CB90001CB000007C96005C1F0001009B980042C6
-:10CBA000613101001B8400881CB00000E699000779
-:10CBB0009630010000002D0548B10100000000F092
-:10CBC00018B001000000000080B00100AE8AA25F32
-:10CBD000816C0000A8002D431980010037002DF062
-:10CBE00024B00100040000F38EF401000F0000F3F4
-:10CBF00090880100838922488E6C00003600004036
-:10CC00004399010058003D43E7E1010083891FF08B
-:10CC1000246C0000828923418F6C0000AE8A00479B
-:10CC200081B00000AE8A004881B0000040000040A2
-:10CC300043990100B0002DF014B001008889220A48
-:10CC4000904000003999004091300100AE8AA24026
-:10CC500080320000B0002D4581B00100948922F09F
-:10CC60002C300000A3002D3083B00100AC002DF368
-:10CC700082E001008E89A3412C6C000000000016A8
-:10CC800082B0010098002DF082C0010088002DF0D4
-:10CC900082D00100000000F298E80100AE8A204C2A
-:10CCA000826C00007C002D4198E80100AE8A20F0E3
-:10CCB000986C0000058A220A803200004002000CB5
-:10CCC0007E890100058AA64081320000AE8A0049B3
-:10CCD00081B00000200000A680B001009C892243A2
-:10CCE000216F00001380004080DC01009D8900401E
-:10CCF00081B200001A80004080DC01009D89A25EA4
-:10CD00000B7D00000000004008B101009F899F8555
-:10CD100080320000A389004081B200005F8422407D
-:10CD2000577D00000100004057990100A38942404F
-:10CD300081320000000000449393010049841A5B93
-:10CD4000699300007B00004061990100A689A8B1A9
-:10CD500080300000CF891D4080320000C089224011
-:10CD6000AF6F0000C089225B817C00000400225D5F
-:10CD7000737D00007D00004061990100AC89A8B17D
-:10CD8000943000000000005F61B101000000004A23
-:10CD900062B10100AF89A84081320000B1894340EF
-:10CDA00081320000BF892257737D00007700004068
-:10CDB00061990100B389A8B1943000007700004068
-:10CDC00061990100B589A8B19630000000000048C3
-:10CDD00061B101000000004A62B10100B889A84AAF
-:10CDE00080330000BD89225F957C00000000004B6D
-:10CDF00062B10100BB89A84BAC33000000001BA549
-:10CE000082B30100C08900BE83C3000000001B4044
-:10CE100081B301004018004049990100040000A6B8
-:10CE200086B00100CD89A240860400001B849C408E
-:10CE300080320000FFFF004088880100E98900502F
-:10CE4000473101003600004488CC0100C9895240B6
-:10CE500081320000E98900404731010000000041B3
-:10CE600089B00100E989004847310100E9890005DE
-:10CE7000473101001B84004081B2000028000040BF
-:10CE8000479901001B840041E1C10000781800406F
-:10CE900049990100D6892254817C0000D189424001
-:10CEA00081320000008200B469DF010000001A44F2
-:10CEB000939301002800004047990100E98900414F
-:10CEC00089300100E4890F4080320000FF7F00407C
-:10CED00088880100E989005047310100360000448C
-:10CEE00088CC0100DC8999408032000000000048B5
-:10CEF00089D00100DE899B40803200000000004C98
-:10CF000089D00100E0891F4480320000E989004097
-:10CF1000473101000000004189B00100E989004863
-:10CF200047310100E9890058473101001B84004066
-:10CF300081B200001000004086F401006F00004341
-:10CF4000868801001B84260547310000E9890041DD
-:10CF5000893001001B84004081B200000000A04421
-:10CF6000F04101000000004081B20100000080415A
-:10CF7000E1C10100040000CB81C80100EF8922401B
-:10CF8000F27F00008180006F97330100F189224019
-:10CF9000737D00009B8000418BB30000EC89225917
-:10CFA000737D00007900004061990100EC8928B18F
-:10CFB0007E310000F289004081B20000040022C0EE
-:10CFC00095300000000000D697B00100FA89225D7C
-:10CFD000737D00007D00004061990100F889A8B1CF
-:10CFE000803000000000005E7F830100000000BF71
-:10CFF000C5B10100040000408198010025010040F6
-:10D0000081320100FD89A24181500000FF89435F08
-:10D010007F130000260100BFC53101000000005F42
-:10D020007F8301000000005E7F9301008B9800BFAA
-:10D03000C53101001B84004081B200000C8A9C0FA6
-:10D04000803200000080001042C901000C8A22409A
-:10D05000E36D00000000004561B1010040000010D8
-:10D0600062DD0100098AA840813200001B8400882B
-:10D070001CB0000077952202803200000D8A4240E9
-:10D0800081320000000000449393010077951A025A
-:10D0900068970000178A9C0F803200000080001003
-:10D0A00042C90100178A2240E36D000000000045DC
-:10D0B00061B101004000001062DD0100148AA84047
-:10D0C000813200001B8400881CB000008195220280
-:10D0D00080320000188A4240813200000000004483
-:10D0E0009393010081951A0268970000228A9C0F91
-:10D0F000803200000080001042C90100228A2240D4
-:10D10000E36D00000000004561B101004000001027
-:10D1100062DD01001F8AA840813200001B84008864
-:10D120001CB000006F84220280320000238A42403B
-:10D1300081320000000000449393010000001A02B5
-:10D14000689701006F84004005B00000008000A6D1
-:10D1500056B1010056952F4005B00100738AA240D8
-:10D16000E76D0000B8942941E7B1010000000054C8
-:10D17000EF930100000000F20EB001002900004012
-:10D180000D9801000900000712E40100000000A74B
-:10D1900013C00100030000071AF401000700000794
-:10D1A00016880100FFFF001034D8010000000003C2
-:10D1B000349401000000004023B00100201800401A
-:10D1C0001198010000B5000D42C90100578A220BD9
-:10D1D000E67D0000388A444081320000FFFF0007EE
-:10D1E000848901003F8A05C224300000679800400E
-:10D1F0008132010000002D0548B10100748A1CF045
-:10D2000018300100578A004081B2000000001C4025
-:10D2100081B201004E8AA048236C0000000000503B
-:10D2200035D001000080001A42C90100488A22401E
-:10D23000E36D00000000004261B101004000001AEF
-:10D2400062DD0100458AA840813200001B8400880D
-:10D250001CB000002098004043990100748A00F837
-:10D2600018300100498AA24123500000FFFF00103E
-:10D2700034D801000000000334940100201800405D
-:10D280001198010000002E1A48B10100000000446E
-:10D29000F1B1010000000008F0B1010000000042FF
-:10D2A00061B101002000001A62DD0100528AA80964
-:10D2B000E03100000000004123C0010000000050E8
-:10D2C00035C001000000004411C00100638A224102
-:10D2D0000D500000000000410FC001005F8AA0AAAD
-:10D2E0000F6C0000000000410FB0010009000007B2
-:10D2F00012E40100000000A713C00100000000407C
-:10D300001BB00100368A004117B00000000200097E
-:10D3100012C80100368A8341174000000000004017
-:10D3200017B00100368A00411BC000006E8A2340FE
-:10D33000236C00000000005035D001000080001A6E
-:10D3400042C901006B8A2240E36D000000000042E8
-:10D3500061B101004000001A62DD0100688AA84046
-:10D36000813200001B8400881CB00000209800401F
-:10D3700043990100748A00F8183001006C8AA241B8
-:10D3800023500000000000410FC00100718AA0AAD4
-:10D390000F6C0000000000410FB00100B89420079E
-:10D3A000E4B1010056952040E7B10100058A004034
-:10D3B0000FB00000FFFF000C80D80100C002000C7D
-:10D3C0007E890100868A2654613100007C8A870CA0
-:10D3D000803200000F000040629901007C8A2840E2
-:10D3E000813200007C8AA254777D0000788A004058
-:10D3F00081B20000818A2246197C00000D000040A5
-:10D40000629901000000A84081B200000000A2540F
-:10D41000777D01007D8A004081B20000868A224922
-:10D42000197C00000E000040629901000000A84035
-:10D4300081B200000000A254777D0100818A004083
-:10D4400081B2000010000040629901000000A84075
-:10D4500081B200000000A254777D0100868A00405E
-:10D4600081B2000030942F55F1930100004000A6D6
-:10D4700056B101006F84A241E551000064000040F4
-:10D48000E59901008E8A424081320000918AA29380
-:10D49000576F00000000004157C3010000001AABA5
-:10D4A00027B301006F842250FD7F00006F8422515A
-:10D4B000FD7F00006F84A2411D53000050460040D4
-:10D4C0001D9B010034820040813201000E000048A3
-:10D4D000B2CB0100FC810040493101009D8A22400D
-:10D4E000B56F00000E000048B2CB0100FF81004183
-:10D4F000B55301006F84004081B20000000000516C
-:10D50000FD8301004016004045990100358200402E
-:10D51000493101001E000048B2CB0100FC810040EF
-:10D5200081320100000000DA91C0010004000048CF
-:10D53000B2CB0100FF810040B533010060162040EE
-:10D54000E5B10100DB820040B5330100080000486E
-:10D55000B2CB0100FFFF004AB48B0100FF81004005
-:10D56000813201000A000048B2CB01001000004ADD
-:10D57000B4F70100FF810040813201006F84004058
-:10D5800081B200000500004043990100000000F353
-:10D5900008B0010004002040E6B101000300004093
-:10D5A00096E401000000000496C00100B48A004B1C
-:10D5B00010C90000D78D004109B000000400002010
-:10D5C0008FB00000040000208FB000000400002095
-:10D5D0008FB00000040000208FB000000400002085
-:10D5E0008FB00000040000208FB000000400002075
-:10D5F0008FB00000040000208FB000000B8E0041AF
-:10D6000009B00000040000208FB0000004000020DA
-:10D610008FB00000040000208FB000000400002044
-:10D620008FB00000040000208FB000000400002034
-:10D630008FB00000040000208FB000000400002024
-:10D640008FB000003D8E004509B000003D8E0045C2
-:10D6500009B000003D8E004509B000003D8E004538
-:10D6600009B00000040000208FB00000040000207A
-:10D670008FB00000040000208FB0000004000020E4
-:10D680008FB000007C8E004309B00000A58E0043DF
-:10D6900009B00000A98E004409B0000011900045B7
-:10D6A00009B00000040000208FB00000040000203A
-:10D6B0008FB00000040000208FB0000004000020A4
-:10D6C0008FB00000040000208FB00000B58E004332
-:10D6D00009B00000B48E004309B00000D58D0045AC
-:10D6E00009B00000040000208FB0000004000020FA
-:10D6F0008FB00000040000208FB000000400002064
-:10D700008FB00000758F004209B00000758F004394
-:10D7100009B00000758F004409B00000D58D0045A8
-:10D7200009B00000040000208FB0000004000020B9
-:10D730008FB00000040000208FB000000400002023
-:10D740008FB00000040000208FB00000A18F0043C4
-:10D7500009B00000040000208FB00000D58D004506
-:10D7600009B00000040000208FB000000400002079
-:10D770008FB00000040000208FB0000004000020E3
-:10D780008FB00000040000208FB00000BF8F004366
-:10D7900009B00000BF8F004409B00000D58D0045DE
-:10D7A00009B00000040000208FB000000400002039
-:10D7B0008FB00000040000208FB0000004000020A3
-:10D7C0008FB00000040000208FB00000BF8F004227
-:10D7D00009B00000040000208FB00000D58D004586
-:10D7E00009B00000040000208FB0000004000020F9
-:10D7F0008FB00000040000208FB000000400002063
-:10D800008FB00000040000208FB00000E78F0044BC
-:10D8100009B00000040000208FB00000D58D004545
-:10D8200009B00000040000208FB0000004000020B8
-:10D830008FB00000040000208FB000000400002022
-:10D840008FB00000D58D004209B00000F88F004570
-:10D8500009B00000F88F004509B00000D58D0045E3
-:10D8600009B00000040000208FB000000400002078
-:10D870008FB00000040000208FB0000004000020E2
-:10D880008FB00000FA8F004209B00000FA8F004309
-:10D8900009B00000FA8F004409B00000FA8F00457B
-:10D8A00009B00000040000208FB000000400002038
-:10D8B0008FB00000040000208FB0000004000020A2
-:10D8C0008FB00000040000208FB000000400002092
-:10D8D0008FB000000290004409B00000D58D0045D3
-:10D8E00009B00000040000208FB0000004000020F8
-:10D8F0008FB00000040000208FB000000400002062
-:10D900008FB000001390004209B000000390004364
-:10D9100009B000001390004409B00000D58D004507
-:10D9200009B00000040000208FB0000004000020B7
-:10D930008FB00000040000208FB000000400002021
-:10D940008FB00000040000208FB00000149000434E
-:10D9500009B000000A90004409B00000D58D0045D0
-:10D9600009B00000040000208FB000000400002077
-:10D970008FB00000040000208FB00000D58D004162
-:10D9800009B00000738F004209B00000738F00439C
-:10D9900009B00000738F004409B00000D58D004528
-:10D9A00009B00000040000208FB000000400002037
-:10D9B0008FB00000040000208FB00000D58D004122
-:10D9C00009B000001590004209B000001590004316
-:10D9D00009B000001590004409B00000D58D004545
-:10D9E00009B00000040000208FB0000004000020F7
-:10D9F0008FB00000040000208FB000000400002061
-:10DA00008FB00000040000208FB000000400002050
-:10DA10008FB00000040000208FB000001C90004573
-:10DA200009B00000040000208FB0000004000020B6
-:10DA30008FB00000040000208FB000001E90004254
-:10DA400009B00000040000208FB000000400002096
-:10DA50008FB00000040000208FB000000400002000
-:10DA60008FB00000040000208FB0000004000020F0
-:10DA70008FB00000040000208FB0000004000020E0
-:10DA80008FB000002A90004309B00000939000433B
-:10DA900009B00000A98E004409B0000011900045B3
-:10DAA00009B00000040000208FB000000400002036
-:10DAB0008FB00000040000208FB0000004000020A0
-:10DAC0008FB00000040000208FB000009B90004346
-:10DAD00009B00000A98E004409B000001190004573
-:10DAE00009B00000040000208FB0000004000020F6
-:10DAF0008FB00000040000208FB000000400002060
-:10DB00008FB00000040000208FB00000AC900043F4
-:10DB100009B00000040000208FB00000D58D004542
-:10DB200009B00000040000208FB0000004000020B5
-:10DB30008FB00000040000208FB00000040000201F
-:10DB40008FB00000798E004309B000009790004329
-:10DB500009B00000A98E004409B0000011900045F2
-:10DB600009B00000040000208FB000000400002075
-:10DB70008FB0000007002D0548B10100000000F340
-:10DB800008B0010006002047E6B10100040000478C
-:10DB900096E401000000004796D001000000004715
-:10DBA00096D001000000000496C00100748B004B69
-:10DBB00010C90000C490004909B000000400002012
-:10DBC00085B000000400002085B0000004000020A3
-:10DBD00085B000000400002085B000000400002093
-:10DBE00085B000000400002085B000000400002083
-:10DBF00085B000000400002085B000000400002073
-:10DC000085B000000400002085B000000400002062
-:10DC100085B000000400002085B000000400002052
-:10DC200085B000000400002085B00000FD90004297
-:10DC300009B000000400002085B0000004000020AE
-:10DC400085B000000400002085B000000400002022
-:10DC500085B000000400002085B000000400002012
-:10DC600085B000000400002085B000000400002002
-:10DC700085B000000400002085B0000004000020F2
-:10DC800085B000000400002085B0000004000020E2
-:10DC900085B000000400002085B00000039100461C
-:10DCA00009B000000400002085B00000040000203E
-:10DCB00085B000000400002085B0000004000020B2
-:10DCC00085B000000400002085B0000004000020A2
-:10DCD00085B000000400002085B000000400002092
-:10DCE00085B000000400002085B000000400002082
-:10DCF00085B000000400002085B000000400002072
-:10DD000085B000000400002085B000000400002061
-:10DD100085B000001191004209B00000040000200D
-:10DD200085B000003391004209B0000004000020DB
-:10DD300085B000000400002085B000000400002031
-:10DD400085B000000400002085B000000400002021
-:10DD500085B000000400002085B000002E91004A2C
-:10DD600009B000000400002085B00000040000207D
-:10DD700085B000000400002085B0000004000020F1
-:10DD800085B000003691004309B000000400002077
-:10DD900085B000008F91004409B00000040000200D
-:10DDA00085B000000400002085B0000004000020C1
-:10DDB00085B000000400002085B0000004000020B1
-:10DDC00085B000000400002085B000008E91004B5B
-:10DDD00009B000000400002085B00000040000200D
-:10DDE00085B000000400002085B0000006910041CD
-:10DDF00009B000000400002085B000000691004337
-:10DE000009B000000691004409B0000006910045E9
-:10DE100009B000000691004609B0000006910047D5
-:10DE200009B000000691004809B0000006910049C1
-:10DE300009B000000691004A09B000000691004BAD
-:10DE400009B000000691004C09B000000691004D99
-:10DE500009B000000400002085B00000040000208C
-:10DE600085B00000EE91004209B0000004000020DF
-:10DE700085B00000EE91004409B0000004000020CD
-:10DE800085B000000400002085B0000004000020E0
-:10DE900085B000000400002085B0000004000020D0
-:10DEA00085B000000400002085B00000EE91004B1A
-:10DEB00009B000000400002085B00000040000202C
-:10DEC00085B000000400002085B0000004000020A0
-:10DED00085B000000400002085B0000006920045D7
-:10DEE00009B000000400002085B0000004000020FC
-:10DEF00085B000000400002085B000000400002070
-:10DF000085B000001D92004709B000000400002009
-:10DF100085B00000FA91004509B00000040000201F
-:10DF200085B000000400002085B000007C9400460D
-:10DF300009B000000400002085B0000004000020AB
-:10DF400085B000000400002085B00000040000201F
-:10DF500085B000000400002085B000003391004629
-:10DF600009B000001191004609B000002C91004753
-:10DF700009B000002C91004809B000000400002006
-:10DF800085B000000400002085B0000004000020DF
-:10DF900085B000002E91004A09B000000400002066
-:10DFA00085B000000400002085B0000004000020BF
-:10DFB00085B000000400002085B0000004000020AF
-:10DFC00085B000000400002085B000008F9100455E
-:10DFD00009B000003691004309B000002C910047C1
-:10DFE00009B000002C91004809B000000400002096
-:10DFF00085B000000400002085B00000040000206F
-:10E0000085B000008E91004C09B000000400002093
-:10E0100085B000000400002085B00000040000204E
-:10E0200085B000000400002085B00000040000203E
-:10E0300085B000000400002085B000002392004459
-:10E0400009B000002392004209B00000C08D0047D3
-:10E0500009B00000C08D004809B000000400002095
-:10E0600085B000000400002085B0000004000020FE
-:10E0700085B000002392004B09B00000040000208E
-:10E0800085B000000400002085B00000069100412A
-:10E0900009B000004692004709B0000004000020CB
-:10E0A00085B000002E92004709B000000400002057
-:10E0B00085B000000400002085B0000004000020AE
-:10E0C00085B000000400002085B00000040000209E
-:10E0D00085B000000400002085B000002E920047AB
-:10E0E00009B000000400002085B0000004000020FA
-:10E0F00085B000000400002085B00000040000206E
-:10E1000085B000000400002085B00000040000205D
-:10E1100085B000000400002085B000002E9200476A
-:10E1200009B000004692004709B000002C9100475A
-:10E1300009B000002C91004809B000000400002044
-:10E1400085B000000400002085B00000040000201D
-:10E1500085B000002E92004709B0000004000020A6
-:10E1600085B000000400002085B0000004000020FD
-:10E1700085B000000400002085B0000004000020ED
-:10E1800085B000000400002085B0000004000020DD
-:10E1900085B000000400002085B0000055920047C3
-:10E1A00009B000005592004809B0000004000020AA
-:10E1B00085B000000400002085B0000004000020AD
-:10E1C00085B000000400002085B00000040000209D
-:10E1D00085B000000400002085B00000B892004027
-:10E1E00009B00000D692004709B00000CA9200486A
-:10E1F00009B000002692004709B0000026920047AF
-:10E2000009B00000D692004709B00000DD92004737
-:10E2100009B00000DD92004809B0000004000020B1
-:10E2200085B00000CA92004809B00000269200475D
-:10E2300009B000002692004709B00000CA920048C9
-:10E2400009B000000400002085B000000400002098
-:10E2500085B000000400002085B00000EE9100436E
-:10E2600009B000000400002085B00000EE910045D8
-:10E2700009B00000EE91004609B000002C91004763
-:10E2800009B000002C91004809B0000004000020F3
-:10E2900085B00000EE91004A09B0000004000020A3
-:10E2A00085B00000EE91004C09B000000400002091
-:10E2B00085B000000400002085B0000004000020AC
-:10E2C00085B000004592004709B00000399200482F
-:10E2D00009B000002D92004709B000002D920047C0
-:10E2E00009B000004592004709B00000C08D00470A
-:10E2F00009B00000C08D004809B0000004000020F3
-:10E3000085B000003992004809B000002D92004706
-:10E3100009B000002D92004709B000003992004872
-:10E3200009B000000400002085B0000004000020B7
-:10E3300085B00000DF92004209B000000400002018
-:10E3400085B00000DF92004409B000000400002006
-:10E3500085B000000400002085B00000040000200B
-:10E3600085B000000400002085B0000004000020FB
-:10E3700085B000000400002085B00000DF92004B53
-:10E3800009B000000400002085B000000400002057
-:10E3900085B000000400002085B0000004000020CB
-:10E3A00085B000000400002085B00000DF9200432B
-:10E3B00009B000000400002085B00000DF92004595
-:10E3C00009B00000DF92004609B00000DF9200476C
-:10E3D00009B00000DF92004809B0000004000020EE
-:10E3E00085B00000DF92004A09B000000400002060
-:10E3F00085B00000DF92004C09B00000DF92004CB5
-:10E4000009B000000400002085B0000004000020D6
-:10E4100085B000000400002085B00000FA9200469C
-:10E4200009B000000400002085B0000004000020B6
-:10E4300085B000000400002085B00000040000202A
-:10E4400085B000001D92004709B0000004000020C4
-:10E4500085B00000FA92004609B0000004000020D8
-:10E4600085B000000400002085B0000004000020FA
-:10E4700085B000000400002085B0000004000020EA
-:10E4800085B000000400002085B00000069400461E
-:10E4900009B000000400002085B000000400002046
-:10E4A00085B000000400002085B0000004000020BA
-:10E4B00085B000001D92004709B000000400002054
-:10E4C00085B000000694004609B00000040000205A
-:10E4D00085B000000400002085B0000006940046CE
-:10E4E00009B000000400002085B0000004000020F6
-:10E4F00085B000000400002085B00000040000206A
-:10E5000085B000002B94004209B0000004000020F8
-:10E5100085B000000400002085B000000400002049
-:10E5200085B000000400002085B000000400002039
-:10E5300085B000000400002085B000002A94004A45
-:10E5400009B000000400002085B000000400002095
-:10E5500085B000000400002085B000000400002009
-:10E5600085B000000400002085B0000004000020F9
-:10E5700085B000000400002085B000002B94004608
-:10E5800009B000000400002085B000002C91004775
-:10E5900009B000002C91004809B0000004000020E0
-:10E5A00085B000000400002085B0000004000020B9
-:10E5B00085B000002A94004A09B000000400002041
-:10E5C00085B000000400002085B000000400002099
-:10E5D00085B000000400002085B000000400002089
-:10E5E00085B000000400002085B000000400002079
-:10E5F00085B000000400002085B000000400002069
-:10E6000085B000000400002085B00000EA920041BF
-:10E6100009B000000400002085B0000004000020C4
-:10E6200085B000000400002085B000000400002038
-:10E6300085B000000400002085B000000400002028
-:10E6400085B00000F792004209B0000004000020ED
-:10E6500085B00000F792004409B0000004000020DB
-:10E6600085B000000400002085B0000004000020F8
-:10E6700085B000000400002085B0000004000020E8
-:10E6800085B000000400002085B00000F792004B28
-:10E6900009B000000400002085B000000400002044
-:10E6A00085B000000400002085B0000004000020B8
-:10E6B00085B000000400002085B00000F792004300
-:10E6C00009B000000400002085B00000F79200456A
-:10E6D00009B00000F792004609B00000F792004729
-:10E6E00009B00000F792004809B0000004000020C3
-:10E6F00085B000000400002085B000000400002068
-:10E7000085B00000F792004C09B000000400002022
-:10E7100085B000000400002085B000000400002047
-:10E7200085B000000400002085B000000692004C77
-:10E7300009B000000400002085B0000004000020A3
-:10E7400085B000000400002085B000000400002017
-:10E7500085B000001D92004709B0000004000020B1
-:10E7600085B00000FA91004C09B0000004000020C0
-:10E7700085B000000400002085B00000CD94004664
-:10E7800009B000000400002085B000000400002053
-:10E7900085B000007194004209B000000400002020
-:10E7A00085B000007194004409B00000040000200E
-:10E7B00085B000000400002085B0000004000020A7
-:10E7C00085B000000400002085B000000400002097
-:10E7D00085B000000400002085B000007194004B5B
-:10E7E00009B000000400002085B0000004000020F3
-:10E7F00085B000000400002085B000000400002067
-:10E8000085B000000400002085B000000400002056
-:10E8100085B000000400002085B000007194004520
-:10E8200009B000007194004609B000002C91004727
-:10E8300009B000002C91004809B00000040000203D
-:10E8400085B000000400002085B000000400002016
-:10E8500085B000007194004C09B000000400002055
-:10E8600085B000000400002085B0000004000020F6
-:10E8700085B00000FA91004209B000007C94004687
-:10E8800009B000000400002085B000000400002052
-:10E8900085B00000FA91004609B000000400002095
-:10E8A00085B000001D92004709B000000400002060
-:10E8B00085B000007C94004609B0000004000020F0
-:10E8C00085B000000400002085B000007C94004664
-:10E8D00009B000000400002085B000000400002002
-:10E8E00085B000000400002085B000008094004343
-:10E8F00009B000000400002085B0000004000020E2
-:10E9000085B000000400002085B000000400002055
-:10E9100085B000001D92004709B0000004000020EF
-:10E9200085B000008094004309B00000040000207E
-:10E9300085B000000400002085B000008094004DE8
-:10E9400009B000000400002085B000000400002091
-:10E9500085B000000400002085B000000400002005
-:10E9600085B000009294004309B00000040000202C
-:10E9700085B000000400002085B0000004000020E5
-:10E9800085B000000400002085B0000004000020D5
-:10E9900085B000000400002085B000006F94004A9C
-:10E9A00009B000000400002085B000000400002031
-:10E9B00085B000000400002085B0000004000020A5
-:10E9C00085B000000400002085B000000400002095
-:10E9D00085B000000400002085B000009294004340
-:10E9E00009B000000400002085B000002C91004711
-:10E9F00009B000002C91004809B00000040000207C
-:10EA000085B000000400002085B000000400002054
-:10EA100085B000006F94004A09B000000400002097
-:10EA200085B000000400002085B000000400002034
-:10EA300085B000000400002085B00000A4940043CD
-:10EA400009B000000400002085B000000400002090
-:10EA500085B000000400002085B000000400002004
-:10EA600085B000001D92004709B00000040000209E
-:10EA700085B00000A494004309B000000400002009
-:10EA800085B000000400002085B00000A494004D73
-:10EA900009B000000400002085B000000400002040
-:10EAA00085B000001191004209B000000400002070
-:10EAB00085B000003391004209B00000040000203E
-:10EAC00085B000000400002085B000000400002094
-:10EAD00085B000000400002085B000000400002084
-:10EAE00085B000000400002085B00000C3940042FF
-:10EAF00009B000000400002085B0000004000020E0
-:10EB000085B000000400002085B000000400002053
-:10EB100085B000000400002085B000000400002043
-:10EB200085B000000400002085B00000339100464D
-:10EB300009B000001191004609B000002C91004777
-:10EB400009B000002C91004809B00000040000202A
-:10EB500085B000000400002085B000000400002003
-:10EB600085B00000C394004609B0000004000020F6
-:10EB700085B000000400002085B0000004000020E3
-:10EB800085B000000400002085B00000C594004A54
-:10EB900009B000000400002085B00000040000203F
-:10EBA00085B000000400002085B0000004000020B3
-:10EBB00085B000001D92004709B00000040000204D
-:10EBC00085B00000C594004A09B000000400002090
-:10EBD00085B000000400002085B000007D94004650
-:10EBE00009B000000400002085B0000004000020EF
-:10EBF00085B000000400002085B000007D94004630
-:10EC000009B000000400002085B0000004000020CE
-:10EC100085B000000400002085B000000400002042
-:10EC200085B000001D92004709B0000004000020DC
-:10EC300085B000007D94004609B00000040000206B
-:10EC400085B000000400002085B000007D940046DF
-:10EC500009B000000400002085B00000040000207E
-:10EC600085B000000400002085B0000004000020F2
-:10EC700085B00000CB94004209B0000004000020E1
-:10EC800085B000000400002085B0000004000020D2
-:10EC900085B000000400002085B0000004000020C2
-:10ECA00085B000000400002085B000006F94004A89
-:10ECB00009B000000400002085B00000040000201E
-:10ECC00085B000000400002085B000000400002092
-:10ECD00085B000000400002085B000000400002082
-:10ECE00085B000000400002085B00000CB940046F1
-:10ECF00009B000000400002085B000002C910047FE
-:10ED000009B000002C91004809B000000400002068
-:10ED100085B000000400002085B000000400002041
-:10ED200085B000006F94004A09B000000400002084
-:10ED300085B000000400002085B000000400002021
-:10ED400085B000003691004D09B00000040000209D
-:10ED500085B000000400002085B000000400002001
-:10ED600085B000000400002085B0000004000020F1
-:10ED700085B000000400002085B0000004000020E1
-:10ED800085B000000400002085B0000004000020D1
-:10ED900085B000000400002085B0000004000020C1
-:10EDA00085B000000400002085B0000004000020B1
-:10EDB00085B000000400002085B0000004000020A1
-:10EDC00085B000000400002085B000000400002091
-:10EDD00085B000003691004D09B000002C9100472D
-:10EDE00009B000002C91004809B000000400002088
-:10EDF00085B000000400002085B000000400002061
-:10EE000085B000000400002085B000000400002050
-:10EE100085B0000007002E4B19900100108A0004F5
-:10EE2000E6B10000C08D2242197C0000C597003A6F
-:10EE300081300100C08D004081B20000C08D2242AF
-:10EE4000197C0000FF1F000F1E8C01003797004047
-:10EE500081320100D08D9C0F803200000000005CE8
-:10EE60001F8001000080001042C90100D08D2240A7
-:10EE7000E36D00000000004561B10100400000109A
-:10EE800062DD0100CD8DA840813200001B84008826
-:10EE90001CB000001986220280320000D18D424051
-:10EEA00081320000000000449393010000001A0228
-:10EEB000689701001986004005B0000005002E4B40
-:10EEC00019900100108A0004E6B100000000004023
-:10EED00087B00100000000408DB0010000800003F9
-:10EEE00042C90100400000A144C90100000000F037
-:10EEF000E0B101005599000607400100000000063E
-:10EF000007D00100D4002E5C1F9001000000000714
-:10EF1000F0B101000C80000342C90100000000F0C4
-:10EF2000F0B101000000004081B20100000000FECD
-:10EF300096B00100000000FE96C00100000000F045
-:10EF4000F0B101000000004081B20100000000FEAD
-:10EF500096C00100000000FE96C00100000000F015
-:10EF6000F0B101000000004081B20100000000FA91
-:10EF700096C00100000000FE96C001000030004B6A
-:10EF8000948801000000004695F001000000004A4E
-:10EF900096C001005E012E34978401000200004BF0
-:10EFA000E4E5010064012040E1B10100090000072F
-:10EFB00086E4010000002EA787C0010010000010A9
-:10EFC00048C9010010000040F199010058010043B8
-:10EFD000F0C9010058010005E0C90100000000442B
-:10EFE00061B10100A00000A462DD0100FA8DA8401B
-:10EFF000813200000000000548B101001A00004005
-:10F000009798010008002E4095B00100028E204B19
-:10F01000946C000000000040F1B10100FF8D004140
-:10F0200095C000001080001042C90100098E2240E6
-:10F03000E36D00000000004461B1010040000010D9
-:10F0400062DD0100058EA840813200001B8400882B
-:10F050001CB000000000000548B10100C597004049
-:10F0600081300100D58D004081B200000C8000038A
-:10F0700042C90100000000F886B00100000000F85D
-:10F0800088B001000E8E424081320000118EA24CE9
-:10F09000FD7F0000128E004CFD930000138E20F0C7
-:10F0A000566F0000000000F056B3010000001A4047
-:10F0B00081B201000080001044C9010064000040DA
-:10F0C000F199010070000005F0C901000000004343
-:10F0D000F0B101000000004761B101002000001004
-:10F0E00062DD0100198EA844E0310000100000101C
-:10F0F0008CC801000080004644C901004000004067
-:10F10000F199010068010005F0C9010064000043A5
-:10F11000F0C901000000004761B101000000004695
-:10F1200062B10100218EA844E03100001B840088F8
-:10F130001CB000000900000786E4010038002EA77B
-:10F1400087C001008B002D0548B10100298E2243A4
-:10F15000E77D00000000004445C101002C8E2244E0
-:10F16000E77D00000000004C45C101000000004A9E
-:10F1700019900100680120A2E4B10100880000405C
-:10F1800043990100308E230BE56D00000000004123
-:10F19000199001000080001044C901005000004097
-:10F1A000F199010058010043F0C901005801000520
-:10F1B000E0C901000000004461B10100000000103E
-:10F1C00062B10100358EA840813200001B840088A6
-:10F1D0001CB000005C002E0548B101000080000357
-:10F1E00042C90100000060F096B00100C5970041DF
-:10F1F00081300100D58D004081B20000408EA249CF
-:10F20000197C00008600004047990100448E0040B0
-:10F21000E5B1000086002F4919800100448EA2F25A
-:10F22000803200008B00004047990100000000423E
-:10F23000E7910100478EA246197C0000A000004023
-:10F24000479901004B8E0040E5B10000A0002F4619
-:10F25000198001004B8EA2F2803200008B0000402A
-:10F260004799010000000041E7910100A80000401B
-:10F270004399010034002DF024B00100000000FB90
-:10F280000CB00100000000FB10B00100000000FB0A
-:10F2900012B001000F0000F316880100040000F313
-:10F2A00014F40100768E2640813200005E8E220A20
-:10F2B000166C000058003D4313E00100000000F808
-:10F2C00082B00100040022F084300000FD9800406C
-:10F2D000813201001B8400881CB000000000000582
-:10F2E00048B101000000004113C001005D8EA04341
-:10F2F000136C00000000004013B00100538E004169
-:10F3000015D00000768E220A8032000058003D435E
-:10F3100013E00100000000F882B00100040022F0B8
-:10F3200084300000FD980040813201004000204000
-:10F33000E1B101001B8400881CB000000000000542
-:10F3400048B10100768E22411550000000000041B6
-:10F3500011C001006A8EA043116C00000000004043
-:10F3600011B0010058003D4311E00100000000F819
-:10F3700036B00100040022F0003000000000005010
-:10F3800083B0010004980047613101001B840088AC
-:10F390001CB00000749500054831010000000045D4
-:10F3A00061B101004000001062DD0100728EA840D2
-:10F3B000813200001B8400881CB00000668E0005AE
-:10F3C00048B1000037002040E7B1010036980051F5
-:10F3D00081300100D58D004081B2000034002E4103
-:10F3E000F5B1010000110040E59901007E8E004852
-:10F3F0001990000034002E41F5B1010000110040C9
-:10F40000E59901000080000342C90100000000F8F6
-:10F4100094B00100838E2245237C0000B0002FF0C1
-:10F420008CB00100000060F08CC001009000004032
-:10F430004399010035002DF08CB0010058003E4387
-:10F44000E7E10100888E2248197C0000000000419D
-:10F450008DC001000000680A8CC0010038002A4AF3
-:10F46000E0B1010028000000E0C901003C00201BC1
-:10F47000E0B101001080000342C90100000000F863
-:10F4800038B00100000000F826B00100040022F8A6
-:10F4900002300000968E2301146C0000000000F87A
-:10F4A00080B00100000000F882B001004C0020F0A4
-:10F4B000E4B1010044002040E0B1010048002041D7
-:10F4C000E0B10100A8002D1032B00100399900F020
-:10F4D000243001009F8EA244816C00009D8E224149
-:10F4E000197C0000A09600403B300100C38EA208AA
-:10F4F0003C3000009F8E004081B20000DD9500404E
-:10F5000081320100C38EA2083C3000005000201C54
-:10F51000E0B1010054002013E0B101004E002001D1
-:10F52000E4B101004000200AE0B101003698005F1C
-:10F5300081300100D58D004081B2000037000040CD
-:10F54000479901007F9600F3943001007E8E224A95
-:10F5500080320000AB8E004081B2000037000040D6
-:10F56000479901007F9600F39430010058003E4314
-:10F5700097E001000000001BF0B101001F006000D7
-:10F58000008C0100D58D85118032000004800003BD
-:10F5900042C90100B0002FF08CB00100000060F003
-:10F5A0008CC001003698005F81300100D58D00408D
-:10F5B00081B20000B58E004919800000BA8E224148
-:10F5C000197C0000A09600403B300100BE8EA208CE
-:10F5D0003C3000003698005F81300100D58D00403E
-:10F5E00081B20000DD95004081320100BE8EA2088C
-:10F5F0003C3000003698005F81300100D58D00401E
-:10F6000081B2000050002D1032B0010054002DF0E6
-:10F6100038B001004E002DF026B0010040002DF260
-:10F6200002B00100000000F014B001003000001032
-:10F630008CC801000080004644C9010068012D44C7
-:10F6400061B10100100068F280C8010000000008EC
-:10F65000F0B1010058010005E0C901000000000BF5
-:10F6600037B001000000004036D001005C012E40A0
-:10F6700010C001000000000680C001000000005220
-:10F6800081D00100D18E2094816C0000CB97009432
-:10F69000E5310100D28E004081B20000CB970040DE
-:10F6A000E43101002000004662DD0100D28EA84056
-:10F6B000233000000E00000F1E8C0100E28E8241FC
-:10F6C000234000002080001042C90100DC8E22404F
-:10F6D000E36D00000000004661B101004000001031
-:10F6E00062DD0100D98EA840813200001B840088B1
-:10F6F0001CB000000000001048B10100119600434A
-:10F70000233001000000000548B101000000001096
-:10F7100032B001000000004123B001000E00000FD4
-:10F720001E8C01000080001944C90100EA8E2241AC
-:10F73000197C0000E68EA3010C6C0000E78E000629
-:10F7400004B000000000000104B00100E98E2002B6
-:10F75000366C00000000001B04B00100ED8E0002BA
-:10F76000F0B10000EC8EA3010C6C0000ED8E680679
-:10F7700004B000000000680104B00100EF8E8008B2
-:10F78000F0310000000000111E9001000000001C7C
-:10F79000F0B101000000004661B10100011F001935
-:10F7A00062DD0100F18EA813E0310000288F2202F3
-:10F7B0001450000044002D020CD00100188FA2024A
-:10F7C00002500000FF8E225C1F7C0000208000039E
-:10F7D00042C90100FE8E2240E36D00000000004798
-:10F7E00061B101004000001062DD0100FA8EA84006
-:10F7F000813200001B8400881CB00000000000055E
-:10F8000048B1010044002D5C1F80010048002DF02C
-:10F8100038B001004C002DF026B0010038002FF266
-:10F8200002B00100198F2201146C00000C8F2246D7
-:10F830001F7C0000000000461F80010020002D03F7
-:10F8400048B101000B8F2240E36D0000000000442E
-:10F8500061B101004000001062DD0100088FA84086
-:10F86000813200001B8400881CB0000038002F0586
-:10F8700048B10100000000F894B0010038002DF0FC
-:10F8800096B001000000004CE1C10100200000031F
-:10F8900048C901000000224AF1B1010044000005FE
-:10F8A000F0C901000000004AF0B101000000004B67
-:10F8B000E0B101000000004761B10100A00000A418
-:10F8C00062DD0100158FA85C1F100000198F000574
-:10F8D00048B100000000000238C00100238F22065A
-:10F8E000803200000000005033C00100218FA202CE
-:10F8F000366C000004008F0D42310000100000F84B
-:10F9000010C801000000005C11800100F0070040F9
-:10F9100037980100D58E00A11AB000000000000247
-:10F9200010C00100D58E000236D000005000201C0F
-:10F93000E0B1010054002013E0B101004E002001AD
-:10F94000E4B101004000200AE0B101002D8F005F0A
-:10F9500001B0000037002D4601B00100040000F3A3
-:10F9600080F401002C8FA043816C00000000005542
-:10F9700001B0010040002040E1B101000080001909
-:10F9800042C90100338F2240E36D000000000046B1
-:10F9900061B101004000001962DD0100308FA84014
-:10F9A000813200001B8400881CB0000011960010FA
-:10F9B000483101003080001042C901003A8F2240D6
-:10F9C000E36D00000000004461B101004000001040
-:10F9D00062DD0100378FA840813200001B8400885F
-:10F9E0001CB0000060012F0548B101000000000BB1
-:10F9F000E4B101000000005017F001003F8F90F2C9
-:10FA0000164000000000004117C001000000662001
-:10FA100017A40100320000A62AC00100000000F275
-:10FA20002A940100488F22491F7C000000000049F1
-:10FA30001F8001000000004005B0010000F0000C34
-:10FA4000188C01000B98004C95300100588F000075
-:10FA500092B000004F8F2240AF6F000000C0001E28
-:10FA600094DC01000000001596B001008898004069
-:10FA7000053001004E8FA240976C0000618F004757
-:10FA800019800000588F000092B000004F8F43484B
-:10FA90006131000000D0001E62DD0100548F28405B
-:10FAA00005300000508F2248777D0000578F0040BE
-:10FAB00081B200000000001562B10100608F284093
-:10FAC00081320000548F004081B2000000001B0012
-:10FAD00092B001005D8F2241197C0000008000037C
-:10FAE00042C90100E29500F8003001005A8FA2419E
-:10FAF0003B500000618F004900B00000FF07001E6E
-:10FB0000008C0100E295004081320100618F0049C4
-:10FB100000B0000000001B4719800100648F225FC5
-:10FB2000016C00006399004081320100B08A00003E
-:10FB300080B000006B8F225C1F7C000020800003DF
-:10FB400042C901006B8F2240E36D000000000047B6
-:10FB500061B101004000001062DD0100688FA84023
-:10FB6000813200001B8400881CB000006B8F4005B0
-:10FB700048310000FFFF000794890100718F85CA9A
-:10FB8000943000006399185C1F0001000E00000F04
-:10FB90001E8C01007889004081B200003698180060
-:10FBA00080300100D58D0047198000000000004022
-:10FBB00019800100D58D2247197C0000DD95004099
-:10FBC00081320100788FA20880320000D58D00407C
-:10FBD00081B20000CB9700400D3001009C01004035
-:10FBE00045990100FFFF000B988801008B002D5004
-:10FBF00017F001007E8F904C16400000000000417D
-:10FC000017C00100808F2243E77D00000000004400
-:10FC100045C101000000662017A4010068010040F2
-:10FC2000439901005C012EF280B001003E000040CB
-:10FC300080CE0100878F2440813200000000004602
-:10FC400081C00100888F0094E5B10000020062408D
-:10FC50007ECD01000000005781C0010000002E1081
-:10FC600048B1010003000040F08D010000000008D1
-:10FC7000F0B1010058010005E0C901000000004496
-:10FC800061B101000000001062B101008E8FA84038
-:10FC9000813200001B8400881CB0000000000005B9
-:10FCA00048B101009A8F2240AF6F00000040000869
-:10FCB00094DC01008898004081320100988F224036
-:10FCC000976C0000E295000800300100D58D0040DF
-:10FCD00081B200000000004005B00100D58D004752
-:10FCE000198000009A8F43486131000000500008DD
-:10FCF00062DD0100A08F2840053000009B8F224864
-:10FD0000777D0000E2951B0800300100D58D004092
-:10FD100081B20000D58D1B471980000035000040DE
-:10FD200047990100010063F384C80100A58FA04337
-:10FD3000856C00000000634085B00100A800004011
-:10FD40004399010037002FF024B00100010063F354
-:10FD500082CC0100B08FA2419E060000D58D2244C6
-:10FD600083700000360000404399010058003D4375
-:10FD7000E7E10100D58D1FF0246C00006399004875
-:10FD800081300100B08A2341836C0000B08A0047B3
-:10FD900081B0000058003D4385E00100000000F8FC
-:10FDA00036B00100000000F000B001002800004063
-:10FDB0008398010004980047613101001B8400888A
-:10FDC0001CB0000000002D0348B1010008002DF018
-:10FDD00094B00100000000F88EB0010090002DF0FA
-:10FDE00014B001000000000548B10100848EA2405B
-:10FDF0008F7C0000BE8F22478F7C0000848E0048DD
-:10FE0000199000002D90004081B2000036002D5D59
-:10FE100005B4010037002DF380B00100000000F3AD
-:10FE20008EB001005C003D4381E00100A8002DF090
-:10FE300094B00100000000F024B001002000001088
-:10FE400086DC01004080000344C90100E394004ABD
-:10FE5000F031010036002F5C1F900100CC8FA250C2
-:10FE60008F50000034002040E1B10100D58D0040EA
-:10FE700081B200000000634181C00100CF8FA04328
-:10FE8000816C00000000634081B001003700204712
-:10FE9000E6B10100D58D2247803200000400004702
-:10FEA0000CF401000000004F8F840100E48F224712
-:10FEB0000C6C000058003D4381E00100E48F1FF00E
-:10FEC000246C00000000005C1F8001000080001016
-:10FED00042C90100DD8F2240E36D000000000045B3
-:10FEE00061B101004000001062DD0100DA8FA8401E
-:10FEF000813200001B8400881CB00000DD8F42406E
-:10FF000005300000000000449393010000001A5DDA
-:10FF100069930100E28F23410D6C0000BF8F000543
-:10FF200048B100006399000548310100B08A0048DB
-:10FF300081B00000D58D22408F6C00003698005FA4
-:10FF400081300100D58D004081B20000A200004048
-:10FF500043990100000000F384B00100A6002D4980
-:10FF600019900100020000F280F40100B8002D4059
-:10FF700081B20100000000F280C0010000000040DA
-:10FF800082F801001900004081980100F38FA04021
-:10FF9000826C00002C01004081980100F38FA34087
-:10FFA000826C00000000004180B00100F58F204C01
-:10FFB000856C00000000004185C0010086002040E3
-:10FFC000E4B10100A2002042E6B10100D58D00405D
-:10FFD00081B20000C597005081300100D58D0040EE
-:10FFE00081B200000480000342C90100040022F035
-:10FFF00080300000000000408DB0010055990040A5
-:020000021000EC
-:1000000087300100B0002F5C1F900100000060F0FD
-:1000100080C001003698005F81300100D58D00401E
-:1000200081B200000400004081B20000D58D22465C
-:10003000197C0000A000004047990100010062F215
-:1000400096CC0100D58DA640813200003698004A3A
-:10005000813001000B98004695300100D58D00409D
-:1000600081B20000D58D2249197C00008600004035
-:1000700047990100010062F280CC0100D58DA640B5
-:10008000813200003698004A813001000B98004709
-:1000900095300100D58D004081B20000749500407C
-:1000A00081320100D58D005C1F900000D58D00408D
-:1000B00081B20000D58D004081B20000BA0000403E
-:1000C00047990100010062F280C801001990904038
-:1000D00080320000FFFF624081980100A4000040D0
-:1000E00047990100D58D2240E56D0000D58D004176
-:1000F000E5C10000C597004D81300100D58D00405D
-:1001000081B200005C00004047990100040022F029
-:100110009630000000000040E1B1010000800003C3
-:1001200044C901000000004BE0B1010000000040A4
-:100130008DB0010055990040873001008B000040D0
-:1001400047990100299080F396300000000000409C
-:10015000E78101000000004719900100D58D005C87
-:100160001F9000003400004045990100010000404C
-:10017000F599010000110040E5990100DD9500406E
-:10018000813201003E90A20880320000370000401A
-:1001900047990100000000F382B0010000006351A4
-:1001A00083D001003400004047990100010063F34F
-:1001B00084CC010036909F428032000000006342F0
-:1001C00085B001000000004503F0010000000001BF
-:1001D00000C001003890375C613100000000001B56
-:1001E00062B101003990A84B191000000000000016
-:1001F00062B101003B90A84081320000058A17409F
-:1002000081B200000080000342C9010090002DF07F
-:1002100094B00100AC002DF030B0010035002DF09D
-:1002200028B0010058003E43E7E10100010000183A
-:10023000F0C901000000004AE0B1010038002000D0
-:10024000E0B101003C00201BE0B101004000204073
-:10025000E1B10100000000402BB001001A980040FD
-:100260000D3001000000001816C001004D90A014D0
-:10027000164400000000004117C001000E0000A25B
-:1002800044C9010000000018F8B10100B0002D14AD
-:10029000F8B1010010500040879801005690224AA2
-:1002A000197C00000030004386C801000030000BBC
-:1002B00016C801005690A4408132000000000041A1
-:1002C00017C0010001006E4386980100519800306C
-:1002D000813001005A90A041174000000000004109
-:1002E00017C001006190224A197C0000080000A29A
-:1002F00044C90100CC002DABF9B10100000000ABF6
-:1003000017C001006090A0F01644000000000041FA
-:1003100017C00100000064F082B0010090000040AE
-:10032000459901000000604131C00100BC0000405F
-:10033000439901006790060C80320000A00020F273
-:10034000E4B1010004000946191000009C010040BE
-:1003500045990100FFFF000B988801008B002D508C
-:1003600017F001006C90904C164000000000004116
-:1003700017C001006E902243E77D0000000000449A
-:1003800045C101000000662017A40100680100407B
-:10039000439901005C012EF280B001003E00004054
-:1003A00080CE01007590244081320000000000469C
-:1003B00081C0010076900094E5B100000200624027
-:1003C0007ECD01000000005781C0010000002E100A
-:1003D00048B1010003000040F08D0100000000085A
-:1003E000F0B1010058010005E0C90100000000441F
-:1003F00061B101000000001062B101007C90A840D2
-:10040000813200001B8400881CB000000000000541
-:1004100048B1010086902240AF6F00000040000804
-:1004200094DC010088980040813201008190A24054
-:10043000976C000035000040479901008A90004009
-:1004400005B000008690434861310000005000086C
-:1004500062DD01008790A8400530000035001B4098
-:1004600047990100010063F384C801008D90A04307
-:10047000856C00000000634085B00100370000403B
-:1004800047990100010063F382CC01008B0000401A
-:100490004799010000000045E79101003698005F90
-:1004A00081300100D58D004081B20000370000404E
-:1004B000479901007F9600F3943001002D90224A65
-:1004C00080320000AB8E004081B200003700004057
-:1004D000479901007F9600F3943001007B8E224AF9
-:1004E00080320000AB8E004081B200003600004038
-:1004F00043990100000000FB12B001000F0000F35F
-:1005000090880100040000F30CF40100A58E22067F
-:10051000906C00005C003D4313E00100A8002DF04A
-:1005200094B0010037002FF024B0010036002A50AB
-:10053000E7D101000000634113C00100A790A04370
-:10054000136C000000000040E7B10100E1940010CE
-:10055000863001001B8400881CB00000A990420571
-:10056000483100000000004493930100A58E1A5DFD
-:100570006993000036002D1086B001005C003D43F9
-:10058000E7E10100A8002DF094B0010035002FF044
-:1005900024B0010001006BFB84C80100B490A043AB
-:1005A000856C000035002040E7B1010000000040EC
-:1005B00081B20100010063F312C80100B790A043AB
-:1005C000136C000000000040E7B101004080000310
-:1005D00044C90100E394004AF03101001B84008803
-:1005E0001CB00000BA9042054831000000000044F1
-:1005F0009393010000001A5D6993010037000040E9
-:1006000047990100110063F382CC0100A98F2241B8
-:100610009E060000350000404399010058003D430C
-:10062000E7E10100000000F836B00100B38F00F0F0
-:1006300000B000005E012D0548B10100C59047F2F1
-:100640001230000000993F4213F00100CA90224787
-:10065000E77D00006B841F881CB00000C490004040
-:1006600081B2000000000047E791010000001F4236
-:10067000199001007500004061990100CC90A8B16B
-:100680000C3000005C970010943001001B8400883F
-:100690001CB000005E012E0548B10100C0A83D4617
-:1006A0000DE001000000004097B00100D69022400C
-:1006B000E16D00000400024197400000D39000501B
-:1006C00043C10000E290224B803200000000624BE8
-:1006D000129401000900000796E40100000000A741
-:1006E00097C001003000001094C801000080004A4B
-:1006F0004499010000000042F1B101005E01004B8D
-:10070000F0C901005E010005E0C9010000000044DD
-:1007100061B101002000004A62DD0100E090A840C4
-:10072000813200000080001044C901000000005028
-:10073000F1B101000400000996E40100000068A87E
-:1007400097C00100D4000005E0C90100000000448A
-:1007500061B101000000001062B10100E890A84002
-:10076000813200001B8400881CB0000000993F42C9
-:1007700013F00100EC904740813200003F0000F38D
-:100780009688010000000040E7B1010000001F55FD
-:1007900061B101000000000662B10100F090A840C4
-:1007A00081320000F590224B803200000000004BA7
-:1007B00062B10100F390A840813200000000009770
-:1007C00013B001000000009697B00100FB902009D3
-:1007D000966C0000FB901F09962400006B84008833
-:1007E0001CB00000F690004081B20000C597005791
-:1007F00081300100C08D000548B100002E0000408E
-:1008000043990100019122F380320000C597004214
-:1008100081300100058A004081B200003698005204
-:1008200081300100C08D004219800000C597003A58
-:10083000813001003698005281300100C08D0040A7
-:1008400081B200000000004005B00100DF960040CA
-:1008500095300100C08D2240956C00000C91A240A3
-:100860001F7C0000E295004081320100058A0040B3
-:1008700081B200000480000342C90100000000F2C0
-:1008800002B001008A960052953001009196004B0B
-:1008900002B00000058A004081B200000A990040C1
-:1008A000953001001891A208803200001891A2161C
-:1008B00080320000058A2242197C00000000004BB3
-:1008C00019900100C597003A81300100058A004067
-:1008D00081B20000002300A616B001001B91831E08
-:1008E000803200000008000B16DC01000000000050
-:1008F0002AC001000E980008803001001F91005EA0
-:10090000179000002F98004361310100EF940040E0
-:100910008D300100169800071614010000800010A9
-:1009200042C9010027912240E36D0000000000430E
-:1009300061B101004000001062DD01002491A84077
-:10094000813200001B8400881CB00000B797005E55
-:1009500005100100E2950040813201002B9122092F
-:10096000803000003698004013300100C58D00052E
-:1009700048B100000F97004081320100C08D004057
-:1009800081B200000000004A1F9001003291224312
-:100990003D7C00000000004419900100000000436D
-:1009A0003D800100339100421990000014002D4554
-:1009B0001F9001008F91831E803200008F910044B0
-:1009C00019900000D4950040813201004791A2089F
-:1009D000803200004791A216803200004391A2426B
-:1009E000197C00000082000204DC0100A098004095
-:1009F00047990100E9890041893001004091A241F5
-:100A0000197C0000E295004081320100058A004017
-:100A100081B200008A960015943001009196004B37
-:100A200002B00000058A004081B200000F9700402C
-:100A3000813201000000004B19900100C597003A77
-:100A400081300100058A004081B200004A912242B3
-:100A5000197C00000F970040813201004B9100404B
-:100A600081B20000DF96004081320100779122417F
-:100A7000197C0000C000001598C801007791A00BF8
-:100A8000996C00003000001080C801000080004018
-:100A90004499010000000050F1B101000000000382
-:100AA000F0B101000000004261B10100000000400F
-:100AB00062B101005391A800E03100001B8400885E
-:100AC0001CB000000000000548B10100C000001586
-:100AD00098C8010030002E0B99D0010000006A5028
-:100AE00099C00100C000620180CC01000C800003AD
-:100AF00042C901002D002DF022B001000000004C81
-:100B000080C001000000005C23800100D4003F4150
-:100B1000E7E101000B000011E4F501002F00204780
-:100B2000E7B501006491230B816C00000000004FC9
-:100B3000E59101000000000880B001000000000BFA
-:100B400003B001000000001502D001000E98000063
-:100B50002A4001000000004361B101004000001084
-:100B600062DD01006991A840813200001B84008889
-:100B70001CB00000E295000548310100C0000001F2
-:100B800080CE010075912611003000001000000099
-:100B90002AC801000000000880B001000000000128
-:100BA00080C00100C00000409998010000000001D1
-:100BB00098D001000E98004C02300100C0000040A7
-:100BC000039801007C91004081B2000030002F08A2
-:100BD00080B00100C0000015F4C90100C000000190
-:100BE000E4CD0100C0000040039801000E98000011
-:100BF0002A400100819122441F7C0000AC002F405C
-:100C000013B0010000000001E0C10100B00000408D
-:100C10004799010082910001E0D10000EF9400406B
-:100C20008D300100806300A616B001001698000701
-:100C3000161401000080001042C901008A91224070
-:100C4000E36D00000000004361B1010040000010AE
-:100C500062DD01008791A840813200001B8400887A
-:100C60001CB00000B797005E051001008D912209AD
-:100C7000803000003698004081320100C08D0005B0
-:100C800048B100008F91004A1F9000000000000052
-:100C900010B0010024002D1510C0010028002DF017
-:100CA00016B0010022002DF026B0010014002FF232
-:100CB0000CB0010000000001E0D1010000000010B4
-:100CC00032B001000000000B1BB0010004001F1532
-:100CD0001A5000000000004023B001000000000195
-:100CE0002AB001007197004035B000002F0020406D
-:100CF000E7B10100D391A2451F7C00002400200B26
-:100D0000E0B1010028002013E0B10100220020061C
-:100D1000E4B10100A991225C1F7C00000000005C8E
-:100D20001F8001003080001042C90100A9912240BB
-:100D3000E36D00000000004761B1010040000010B9
-:100D400062DD0100A591A840813200001B8400886B
-:100D50001CB000000000000548B10100008000192F
-:100D600042C90100CC912240E36D0000BA912242B9
-:100D7000197C0000379700408132010089950040BE
-:100D800081320100C791224B8032000000000043F5
-:100D900061B101004000001062DD0100B091A84087
-:100DA000813200001B8400881CB00000B6912241F3
-:100DB000197C0000F895004011300100B791000542
-:100DC00048B10000E295004081320100B99122094A
-:100DD0008030000036980040813201006F8400406E
-:100DE00005B0000037970040813201008595004032
-:100DF000813201000000004361B101004000001099
-:100E000062DD0100BD91A840813200001B84008892
-:100E10001CB00000C3912241197C0000F8950040ED
-:100E200011300100C491000548B10000E295004076
-:100E300081320100C69122098030000036980040BE
-:100E4000813201006F84004005B0000000000043C3
-:100E500061B101004000001062DD0100C891A840AE
-:100E6000813200001B8400881CB0000000000005D7
-:100E700048B10100CF912241197C0000F895004053
-:100E800011300100D091000548B10000E29500400A
-:100E900081320100D2912209803000003698004052
-:100EA00013300100C58D004005B00000008000191E
-:100EB00042C90100DA912240E36D000000000043C6
-:100EC00061B101004000001062DD0100D691A84030
-:100ED000813200001B8400881CB000000000000567
-:100EE00048B101000000004005B00100DE91224140
-:100EF000197C0000F895004011300100DF910005D9
-:100F000048B10000E29500408132010008002D0A3E
-:100F100084B00100000000F082B001001400204005
-:100F2000E1B10100E491031E80320000E59100412F
-:100F300087B0000021000040879801000097004022
-:100F4000813201000000005C1F900100E99122093C
-:100F5000803000003698004013300100EC912244AC
-:100F6000197C00003698004F8130010000000044D9
-:100F700019800100C08DA24A1F7C0000C58D004071
-:100F800081B20000BA002040E5B10100F2919C1747
-:100F900080320000CC0000404399010013990040CA
-:100FA00081320100A398004013300100C0000040CE
-:100FB00043990100C4002DF082B00100EE9800F0CA
-:100FC00084300100E295004081320100C58D220984
-:100FD000803000003698004013300100C58D00407D
-:100FE00081B200002E00004043990100FE91224092
-:100FF000E76D000032000040439901000692A240D4
-:10100000E56D0000CC960040813201002400200BE9
-:10101000E0B1010028002013E0B101002200200609
-:10102000E4B101001400200AE0B10100C58D2209DD
-:10103000803000003698004013300100C58D00401C
-:1010400081B20000CC9600408132010085960040BC
-:101050008132010014922241197C00000000000B33
-:1010600099B0010004001F1598500000149220014F
-:10107000986C00007000000348C9010000002E4673
-:101080001F90010000000050F1B1010000000003BA
-:10109000F0B101000000004261B10100A00000A415
-:1010A00062DD01001192A800E0310000000000059F
-:1010B00048B10100AC002F0010B001000000000199
-:1010C000E0C1010014002F1510C001000000000A4B
-:1010D00080B001000000600180D0010000000047E6
-:1010E000199001009691220980320000369800097B
-:1010F000803001009691004013B000000080000392
-:1011000042C90100000000F082B00100130000405D
-:10111000879801000000004C43C10100009700F0D7
-:1011200084300100C08D005C1F9000002C00204026
-:10113000E7B101002D002040E7B10100C08D004261
-:1011400019800000F2960040813201000B9800489F
-:10115000953001000000004561B101004000001021
-:1011600062DD01002992A840133000001B84008832
-:101170001CB000002F92000548B100002E920040E4
-:1011800013B000000000000012B001000800004091
-:101190004399010014002DF082B00100040022F0F8
-:1011A0008430000013000040879801000097004041
-:1011B000813201000000005C1F900100479200098D
-:1011C00000B00000C08D8742191000008B002F472F
-:1011D00019800100C08D0040E79100002F00004001
-:1011E0004799010045922247E77D0000669500403F
-:1011F000E731010045922200803200004092A24077
-:101200001F7C0000E29500408132010045920040C1
-:1012100081B20000300000404399010032002DF2FD
-:1012200094B001008A9600F2023001009196004BC2
-:1012300002B000000000000548B1010046920040E5
-:1012400001B000000000004005B001004C922200F7
-:10125000803200004B92A242197C0000DF960040D1
-:10126000813201004C92004081B200000F97004093
-:1012700081320100D892225C1F7C00000000005CDB
-:101280001F8001000080001042C9010054922240DA
-:10129000E36D00000000004561B101004000001056
-:1012A00062DD01005192A840813200001B84008859
-:1012B0001CB00000D892000548B10000D495004051
-:1012C000813201005B92A208803200005B92A2167C
-:1012D00080320000C597004D81300100008200027D
-:1012E00004DC0100058A004081B200007400004067
-:1012F00043990100000000F882B00100000000F0F6
-:1013000084B001000000004196B0010069922242C1
-:10131000961400000080001044C901006400684079
-:101320009798010000000041F0B101000000004268
-:10133000F0B1010070000005E0C9010000000045A7
-:1013400061B101002000001062DD01006692A8403A
-:10135000813200000000005C1F9001000000004589
-:1013600061B101004000001062DD01006A92A85CDA
-:101370001F0000001B8400881CB000005E012D05CA
-:1013800048B101006E9247F21230000000993F42CE
-:1013900013F0010073922247E77D00006B841F88E1
-:1013A0001CB000006D92004081B2000000000047B8
-:1013B000E791010004001F0996E40100008000107D
-:1013C00044C9010000000044F1B10100000068A818
-:1013D00097C0010000000003E0B10100008000039D
-:1013E000449901000000004461B1010000000010B8
-:1013F00062B101007B92A840E13100001B840088AB
-:101400001CB0000000993F4213F001007F92470595
-:10141000483100003F0000F39688010000000040C2
-:10142000E7B1010000001F4081B201008792224B0A
-:10143000803200000000005561B101000000004B47
-:1014400062B101008592A8408132000000000007CF
-:1014500016B001000062000B16DC0100669500402A
-:10146000813201009F922200803200001597005FB8
-:101470000110010089922240956C0000008000104C
-:1014800044C9010000000050F1B101000000000358
-:10149000F0B101000000004261B101000000001045
-:1014A00062B101009192A800E03100001B84008825
-:1014B0001CB000000000000548B1010004800003DA
-:1014C00042C90100000000F202B001008A960052F9
-:1014D00095300100E295004081320100899222415D
-:1014E000975000000C80000342C90100000000F08A
-:1014F00000B001000000005C018001009196004BEB
-:1015000002B000008992000548B100001698004022
-:10151000033001001780000344C9010000F0000CF3
-:10152000968801000000634C97F0010010800003D2
-:1015300044C90100000000ABE1B10100B797005EB3
-:1015400005100100030000071AF40100070000075E
-:101550001688010000B5000D46C90100A99230406F
-:10156000813200000000000BE681010000B7000D91
-:1015700046C901000000000BE68101001000100FB9
-:1015800094F40100E999005F950401006B96004016
-:1015900081320100B3922250FD7F0000B19243409E
-:1015A0008132000000001B4131D3010000002E05F4
-:1015B00048B1010000000040E1B10100000000401E
-:1015C0000FB00100CD95004181300100058A004037
-:1015D00081B20000D495004081320100C592A2087A
-:1015E00080320000C592A216803200000082000204
-:1015F00004DC01000000004503F0010000000001D0
-:1016000000C00100BE92375C613100000000001B89
-:1016100062B10100C292284081320000BF920040B6
-:1016200081B200000000000062B10100C292A84037
-:1016300081320000058A174081B200007400224008
-:10164000F1B1010000000040E1B101000B98004A37
-:1016500095300100F296005C1F1001005B92004083
-:1016600081B200002F00004047990100D692224726
-:10167000E77D000066950040E7310100D692220028
-:1016800080320000D192A2401F7C0000E295004011
-:1016900081320100D692004081B20000300000404B
-:1016A0004399010032002DF294B001008A9600F2B5
-:1016B000023001009196004B02B0000000000005CE
-:1016C00048B101000B98004895300100F296005C8B
-:1016D0001F100100DB928742191000008B002F477A
-:1016E0001980010000000040E79101003698004297
-:1016F00081300100C08D004081B20000F2960040B0
-:1017000081320100C08D005C1F900000BA002040B3
-:10171000E5B10100A398004081320100C000004003
-:1017200043990100C4002DF082B00100EE9800F052
-:1017300084300100E2950040813201003698004576
-:1017400081300100C08D2242197C0000C597003A0B
-:1017500081300100C08D004081B2000004000040D3
-:1017600081B20000D495004081320100F092A208BD
-:1017700080320000F092A21680320000C597004728
-:10178000803001000082000204DC0100058A004074
-:1017900081B200001080000344C9010000E100A6EE
-:1017A00084B0010000000040F1B1010000000040E1
-:1017B000F1B101000000600784940100B797005E5A
-:1017C00005100100C08D004081B200008A00004079
-:1017D00047990100E2950041E7410100C58D0040B5
-:1017E00081B20000CC960040813201008596004015
-:1017F00081320100000000012CB001000000001542
-:1018000010B001000000000010C0010004001F0A19
-:101810002C5000000000001032B001000700000B47
-:10182000968801000C932647972400000000004191
-:1018300097C001000C93234B0C6C00004998004B9F
-:10184000043001000000005033C00100000000021D
-:1018500010C001000000000216C0010000000006D8
-:1018600004B001004998004B045001000D93004062
-:1018700081B2000049980006043001001393A24889
-:101880001F7C0000119384481F100000AC00004032
-:10189000479901001393000AE0C100000000000A0C
-:1018A00002B00100EF9400018C3001000000004301
-:1018B00061B101004000001062DD01001493A840F6
-:1018C000813200001B8400881CB00000000000056D
-:1018D00048B101000000000210C00100219322065F
-:1018E000145000003A9700451F0001000093225C4D
-:1018F0001F7C00000000004761B1010040000010A3
-:1019000062DD01001D93A85C1F0000001B8400889D
-:101910001CB000000093000548B100000000000B5F
-:101920001BB0010008002D4085B00100000000F050
-:1019300082B001000000004005B0010000970041A6
-:10194000873001000000004561B101004000001037
-:1019500062DD01002793A840813200001B840088CB
-:101960001CB000000000000548B101002D932209C1
-:10197000803000003698004013300100319322443B
-:10198000197C00003698004F813001003193A24746
-:101990001F7C00000000004419800100FF070008C0
-:1019A000008C01003F93224A1F7C00003793A2164F
-:1019B00002300000E2950040813201002F002040FB
-:1019C000E7B10100C08D004081B200002D002D085C
-:1019D0002AB001003B932242197C00000F9700407F
-:1019E000813201003C93004081B20000DF9600404C
-:1019F0008132010030002E002AD0010032002A1569
-:101A0000E4B10100C08D0016E4B10000529322162B
-:101A100002300000000000082AB001000A990040CE
-:101A2000953001004493A240116C00005393224072
-:101A30002D6C0000AC00004047990100B0002B0164
-:101A4000E0C10100002B00A616B00100000000015B
-:101A5000E0D101000E980008803001004B93005E39
-:101A6000179000002F9800436131010000000043EF
-:101A700061B101004000001062DD01004C93A840FC
-:101A8000813200001B8400881CB0000000000005AB
-:101A900048B101001698000716140100B797005EC0
-:101AA00005100100E2950040813201002F00204026
-:101AB000E7B10100C58D004081B200000000000BBD
-:101AC0001BB0010004001F151A500000609320167F
-:101AD0001A6C00007000000348C901000000225089
-:101AE000F1B1010000000003F0B1010000000000AE
-:101AF000E0B101000000004261B10100A00000A4BB
-:101B000062DD01005D93A8461F1000000000000583
-:101B100048B101000000000010B0010000000015F5
-:101B200010C001000000000A2AB001000000000AF5
-:101B30002CD00100AC002F4023B0010067938445F6
-:101B40001F1000006893000AE0C100000000000AB6
-:101B500002B001007197004035B00000008000190C
-:101B600042C9010070932240E36D00000000004371
-:101B700061B101004000001062DD01006C93A840DB
-:101B8000813200001B8400881CB0000000000005AA
-:101B900048B101008093A2021A50000081932240B4
-:101BA0002D6C00000080001044C9010000000050AE
-:101BB000F1B1010000000003F0B10100FF070008CF
-:101BC000E08D01000000004261B101000000001042
-:101BD00062B101007793A840813200001B84008825
-:101BE0001CB000000000000548B101002F00204794
-:101BF000E7B501000C80000342C90100100000F0AD
-:101C000010C80100F00700401B9801008193005CA0
-:101C1000118000000000000210C00100F895004093
-:101C20001F0001000000000548B101008593230D4D
-:101C30002C6C0000000000401F9001008E93224693
-:101C40001F7C0000000000461F8001007080000320
-:101C500042C901008E932240E36D00000000004263
-:101C600061B101004000001062DD01008A93A840CC
-:101C7000813200001B8400881CB0000000000005B9
-:101C800048B1010008002D4085B00100000000F0BF
-:101C900082B001000000004005B001000097004143
-:101CA000873001000000004561B1010040000010D4
-:101CB00062DD01009393A840813200001B840088FC
-:101CC0001CB000000000000548B1010099932209F2
-:101CD0008030000036980040133001009D9322446C
-:101CE000197C00003698004F813001009D93A24777
-:101CF0001F7C00000000004419800100FF0700085D
-:101D0000008C0100B293224A1F7C0000A393A2160C
-:101D100002300000E2950040813201002F00204097
-:101D2000E7B10100C08D004081B200002D002D08F8
-:101D30002AB00100AE932242197C0000A793A2F3BF
-:101D400084300000000000A585B0010000000041C3
-:101D500085D00100D4003E4185E00100AB932240D4
-:101D60001F7C00000000005A119001000B000008C9
-:101D7000E4F501000F97004081320100AF9300406D
-:101D800081B20000DF9600408132010030002E0059
-:101D90002AD0010032002A15E4B10100C08D0016DE
-:101DA000E4B10000B593A21602300000E2950040B5
-:101DB000813201000494004081B200002D002D0802
-:101DC0002AB00100C39322471F7C0000BF93224228
-:101DD000197C0000BA93A2F384300000000000A533
-:101DE00085B001000000004185D00100D4003E41D3
-:101DF00085E00100BE9322401F7C00000000005AD5
-:101E0000119001000B000008E4F5010058012D00BD
-:101E10002AD0010060012DF010B00100000000F098
-:101E20002CB001004791004081B200000A990041A6
-:101E300095300100CB93A20880320000CB93A2160C
-:101E4000803200000000004197B00100C993230DCB
-:101E5000026C00000000004197C001009196004B09
-:101E600002B000000494000548B10000AC002F014E
-:101E700014B00100B0002B01E0C10100002B00A64E
-:101E800016B0010000000001E0D10100DB93230D3A
-:101E9000026C00000080001044C9010000000050E6
-:101EA000F1B1010000000003F0B1010000000042A8
-:101EB00061B101000000001062B10100D493A800DC
-:101EC000E03100001B8400881CB000000000000509
-:101ED00048B101000C80000342C90100100000F06D
-:101EE00022C801000000005C238001000000000106
-:101EF00084B00100DE93230D026C00000000000D91
-:101F000002B001000000000880B00100E39322400D
-:101F10001B6C00000E98000184500100EB932240DE
-:101F2000856C00000000000180C0010010800010DE
-:101F300046C901000000004F43810100000000423B
-:101F4000F0B1010020000040F0C9010000000016BF
-:101F5000F0B101000000004361B10100A00000A148
-:101F600062DD0100E993A811E0310000FA93005E00
-:101F700017900000EE93230D026C00000000000D8E
-:101F800002B001000000000184D00100F393224060
-:101F90001B6C00002F98004361310100FA9322402E
-:101FA000856C00000000000112C0010010800010CC
-:101FB00046C901000000004F4381010000000042BB
-:101FC000F0B1010000000009F0B1010000000018AC
-:101FD000F0B10100A00000A162DD0100F893A8119A
-:101FE000E03100000000004361B10100400000103A
-:101FF00062DD0100FB93A80A023000001B84008808
-:102000001CB00000E2950005483101000294230D48
-:10201000026C0000FF070011008C0100E2950040F7
-:10202000813201001698000716140100B797005E70
-:10203000051001002F002040E7B10100C58D0040D0
-:1020400081B200000080000342C90100000000F8D6
-:1020500082B00100000000F88CB00100000000F028
-:102060008EB00100C996004013300100000000400E
-:1020700085B001000097004187300100859600403F
-:10208000813201000080001042C9010015942240F5
-:10209000E36D00000000004561B101004000001048
-:1020A00062DD01001194A840813200001B84008889
-:1020B0001CB000000000000548B10100179422097F
-:1020C0008030000036980040133001000000000B03
-:1020D0001BB00100000000151AD001001E94A2419F
-:1020E000197C00000A99004095300100000000169C
-:1020F00080B201002794270880320000449300003A
-:102100002AC000000A990041953001000000001625
-:1021100080B201002294270880320000CB93000097
-:102120002AC000000000004197B001002594230D53
-:10213000026C00000000004197C001009196004B26
-:1021400002B000000000000548B10100C08D22422D
-:10215000197C0000C597003A81300100C08D004015
-:1021600081B200002B94004A1F9000000A960000E4
-:10217000103001000000001510C001000000001028
-:1021800032B001000700000B968801003994264701
-:10219000972400000000004197C001003994234BB0
-:1021A0000C6C00004998004B043001000000005006
-:1021B00033C001000000000210C001000000000256
-:1021C00016C001000000000604B001004998004B51
-:1021D000045001003A94004081B200004998000682
-:1021E000043001003F94A2441F7C00000000000B5B
-:1021F0001BB001000000000A2CD001000000000A02
-:1022000002B00100EF9400018C3001000080001941
-:1022100042C9010046942240E36D000000000043E3
-:1022200061B101004000001062DD01004294A8404D
-:10223000813200001B8400881CB0000000000005F3
-:1022400048B101000000000210C001004F942206B6
-:10225000145000003A9700451F0001002D94225CA5
-:102260001F7C00000000004761B101004000001029
-:1022700062DD01004B94A85C1F0000001B840088F5
-:102280001CB000002D94000548B1000008002D404E
-:1022900085B00100000000F082B0010000000040A5
-:1022A00005B00100009700418730010000000045A3
-:1022B00061B101004000001062DD01005494A840AB
-:1022C000813200001B8400881CB000000000000563
-:1022D00048B101005A94220980300000369800402D
-:1022E000133001005D942244197C00003698004FA1
-:1022F000813001000000004419800100FF07000840
-:10230000008C01006B94224A1F7C00006394A2168B
-:1023100002300000E2950040813201002F00204091
-:10232000E7B10100C08D004081B200002D002D08F2
-:102330002AB0010067942242197C00000F970040E8
-:10234000813201006894004081B20000DF960040B5
-:102350008132010030002E002AD0010032002A15FF
-:10236000E4B10100C08D0016E4B100004093A21654
-:1023700002300000E2950040813201002F00204031
-:10238000E7B10100C58D004081B200000A96004A05
-:102390001F1001005593001032B000008A00204049
-:1023A000E7B101007594A241197C0000E29500405C
-:1023B000813201007894004081B200008A960015B5
-:1023C000943001009196004B02B00000000000051F
-:1023D00048B101007A942242197C0000C597003A66
-:1023E000813001003698004581300100C08D0040E9
-:1023F00081B20000069200451F900000CC9600407C
-:102400008132010085960040813201005593000120
-:102410002CB00000D4950040813201008D94A208B8
-:10242000803200008D94A2168032000000820002EB
-:1024300004DC01000000004503F001000000000181
-:1024400000C001008694375C613100000000001B71
-:1024500062B101008A9428408132000087940040D4
-:1024600081B200000000000062B101008A94A8401F
-:1024700081320000058A174081B20000580120080F
-:10248000E0B1010060012016E0B10100CC960047E8
-:102490001F10010085960040813201005593000114
-:1024A0002CB00000D49500471F100100A094A20892
-:1024B00080320000A094A216803200009C94A242B8
-:1024C000197C00000082000204DC0100A09800409A
-:1024D00047990100E9890041893001008A96001579
-:1024E000943001009196004B02B00000058A004034
-:1024F00081B200000F970040813201000000004BC4
-:1025000019900100C597003A81300100058A00400A
-:1025100081B2000058012008E0B1010060012016DE
-:10252000E0B101000A9600103230010055930040DE
-:1025300013B00000D495004081320100B194A2088C
-:1025400080320000B194A2168032000000820002A6
-:1025500004DC01000000004503F001000000000160
-:1025600000C00100AA94375C613100000000001B2C
-:1025700062B10100AE94284081320000AB9400406B
-:1025800081B200000000000062B10100AE94A840DA
-:1025900081320000058A174081B2000000800003EC
-:1025A00042C90100000000F882B00100000000F8FC
-:1025B0008CB00100000000F08EB00100C996004010
-:1025C000133001000000004085B001000097004179
-:1025D00087300100859600408132010000800010A4
-:1025E00042C90100C0942240E36D00000000004594
-:1025F00061B101004000001062DD0100BC94A84000
-:10260000813200001B8400881CB00000000000051F
-:1026100048B10100479122098030000036980040FF
-:10262000133001004791004081B2000014002D4595
-:102630001F9001008F91004419900000C894A2419E
-:10264000197C00000000004A1F900100FA9200402F
-:1026500081B20000CC96004A1F1001008596004010
-:1026600081320100559300012CB000000A96004011
-:10267000813201005593001032B0000006920045EF
-:102680001F9000000000004137C30100000000411E
-:1026900033C301003600000102CC01000000D2402B
-:1026A00081B20000D49485178032000000009F485A
-:1026B00003D00000D6949C178032000000009F4C8D
-:1026C00003D000000000800134C3010002002D117E
-:1026D00010C10000DB94004043C10000DB940050B7
-:1026E00043C10000200000A142C90100DF94224044
-:1026F000E56D00000400A240E57D00000000004000
-:1027000023B00100000080491F9001000000A24199
-:1027100023D00000DB94005043D100004080000330
-:1027200044C901000000004AF0B10100000000406F
-:10273000F1B1010000000012F0B10100E695004186
-:10274000E13101000080004344C901001000004055
-:10275000F199010000000048F0B1010000000049BB
-:10276000F0B1010040000003E0C901000000004595
-:1027700061B101000000004362B101000000A84007
-:1027800081B20000EC94004081B20000BA00204009
-:10279000E5B10100B0002F018CD00100000000461F
-:1027A000E0C10100AC002F4013B00100CC002D01AE
-:1027B000E0C10100F6949C1780320000139900409C
-:1027C00081320100F8942247197C00000000005F6C
-:1027D00013900100A398004719100100C0002D4478
-:1027E0001F900100C4002DF082B00100EE9800F0AF
-:1027F00084B0000090002D0548B101000D95A24B5A
-:102800001F7C00006095A24C1F7C00000D951F1CD2
-:10281000E06D00001095A20180320000A8002D4656
-:102820008FB0010006951F1CE06D0000B400004051
-:1028300043990100089522F03A6C00005D951FF065
-:102840003A6C00000000A24080B200000000804FFF
-:102850008FB001008A000040439901005E9520423C
-:10286000E76D00000C952240803200000000805986
-:102870008FB00100000080588FB001000F952240FA
-:10288000803200000000805C8FB001000000805B9F
-:102890008FB00100AC00004043990100B0002DF062
-:1028A00084B001001495A242246C00001D9523F011
-:1028B000026C00001A95A2F0803200005F95A242DF
-:1028C000246C00005F95A241036C00001995A240A2
-:1028D00080320000000080518FB001000000805263
-:1028E0008FB001005F951F12845000005F95A0011A
-:1028F000846C00000D95004081B200008B00004008
-:10290000439901004895A246E77D0000140000406D
-:10291000439901003A9522F0143000002695200AD0
-:10292000026C00003795031E803200002595A240FE
-:1029300080320000000080448FB001000000804918
-:102940008FB001002B95220A026C00002E95A24147
-:10295000197C00002A95A2408032000000008055BA
-:102960008FB00100000080568FB001002D95A2406D
-:1029700080320000000080438FB0010000008048DA
-:102980008FB001000000000182B001000000000AC9
-:1029900082D0010034952091836C00003395A240D1
-:1029A00080320000260080408F9801002700804080
-:1029B0008F9801003695A240803200001F008040B1
-:1029C0008F980100200080408F9801003995A24027
-:1029D00080320000220080408F9801002300804058
-:1029E0008F98010088002D448FB001004395A241CB
-:1029F000197C00004095A2433D7C00004095A2F266
-:102A0000026C00000000A24080B20000000080497B
-:102A10008FB001004295A240803200000000804348
-:102A20008FB00100000080488FB001004095A09158
-:102A3000036C00003E9522433D7C00004795A24078
-:102A400080320000280080408F98010029008040DB
-:102A50008F98010014000040439901005195A2F0A5
-:102A60001430000088002D448FB001004E95A2F272
-:102A7000026C00000000A24080B20000000080490B
-:102A80008FB0010040952241197C00003E952091B5
-:102A9000036C00004095004081B200005595200A6B
-:102AA000026C00005495A240803200000000804477
-:102AB0008FB00100000080498FB001005A95220AB2
-:102AC000026C00002E95A241197C00005995A2408D
-:102AD00080320000000080558FB001000000805659
-:102AE0008FB001005C95A24080320000000080435E
-:102AF0008FB00100000080488FB001006295004354
-:102B000095B000006295004195B0000062950042CA
-:102B100095B000006295004495B000006295004CAD
-:102B200095B000000B980040813201006595A240ED
-:102B3000803200000000804B8FB001000000804C0C
-:102B40008FB001002D000040439901002E002FF3AB
-:102B500084B001006A95A2F3963000000000804026
-:102B600001B001002D002A41E7D10100D4003D4110
-:102B700085E001000B0000F200E401007095225A8C
-:102B8000017C0000000000401F9001007195005A78
-:102B900001800000000000401F8001000000634130
-:102BA00085C001000000A0A5856C01000000E34085
-:102BB00085B001000C80000342C9010012000040F2
-:102BC00087980100559900F08CB000007E95224056
-:102BD0000F6C000000002F0548B101007B95A24B4F
-:102BE000197C00007C9522F0186C00000000604BFE
-:102BF0001990010048960007103001006F840040D2
-:102C000005B000008095225A1F7C0000CD95004041
-:102C1000813001006F84004005B0000000002F05E6
-:102C200048B101000000604B199001004896000770
-:102C3000103001006F84004005B0000000002F0537
-:102C400048B101000000604B199001004896000750
-:102C5000103001000000804005B00100899533402C
-:102C6000813200008C95A1AD952000009A9513400B
-:102C700081B200000000134A5A8301003000394538
-:102C800095E001001F00000F5ED801000000005A0F
-:102C90005F9001000000004045B00100000000040A
-:102CA00048B00100000000054AB001000000000C1F
-:102CB00058B00100000000074EB001001886004027
-:102CC0005D9801000000005861B101000000004A59
-:102CD00062B101000000A84197B000009795004044
-:102CE00081B200000000804097B001009B9544072E
-:102CF00096300000FFFF004B8489010000001CC2D9
-:102D000024B00100A595A245257C00009F953120A7
-:102D100085300000A6952212487F000067981112A6
-:102D2000480301001000001296E401000000004B6F
-:102D30001E9401000000805A1F900100A5953140AB
-:102D400081320000000000B424B00100A6952212D8
-:102D5000487F0000679800408132010000002F0585
-:102D600048B10100B3950BF084300000000011124F
-:102D700048830100B0952250857000005E0100403C
-:102D800043990100679700F296300100E99900121B
-:102D9000943001000000005A1F9001001000001242
-:102DA00096E401000000804B1E94010010000042D8
-:102DB00010F4010000B73F4311F0010007000008C4
-:102DC0008A880100B69530A10C300000B9952245E3
-:102DD000E67D0000A695104081B2000000002A4563
-:102DE000E69101000000101248830100000011402C
-:102DF00081B201000000604B858001005E0100404F
-:102E000043990100679700F296300100008000109E
-:102E100044C90100D8000040819801002E002D0512
-:102E200048B10100C4952240E76D000080000040D9
-:102E300080C8010000000040F0B101000900000856
-:102E400086E40100000068A787C00100000000447C
-:102E500061B101000000001062B10100C895A80531
-:102E6000E03100001000001296E401000014004B55
-:102E700096DC01000000804B1E9401001000000F42
-:102E800084F401001F00004284880100D195224093
-:102E900080320000D295004268B10000000000427C
-:102EA0006AB10100D295315A1F0000000000914222
-:102EB00048930100D4953540813200006D000040F8
-:102EC00061990100DA9528B12C300000D595224D8A
-:102ED000757D0000000000402DB00100000095400D
-:102EE00011B001006D00004061990100DA95A8B1B0
-:102EF000103000000000954081B201007F000040CA
-:102F000061990100E19528B110300000DD959FBA6C
-:102F1000803200000000804011B0010000008024D9
-:102F2000118401000000005F61B101000010000089
-:102F300062DD01000000A84081B20000E39500407E
-:102F400081B20000AC94004047990100E7953240FF
-:102F500081320000ED9522F896300000000000F864
-:102F600090B00100000000F092B001000100004BA1
-:102F7000F0CD010020009248E0C901006C00004043
-:102F800061990100F19528B192300000ED95224C35
-:102F9000757D00000400124091B000006C000040FC
-:102FA00061990100F195A8B190300000FF00004840
-:102FB000968801000000004B90D001000100004BFA
-:102FC000F0CD010020000048F0C901000000924946
-:102FD000E0B101000C002D1048B10100FF0700080E
-:102FE000828C0100FF0700F0008C01000000A2416C
-:102FF00000EC0000FE95221A006C0000E295000033
-:10300000343001000000005049C10100FA95A2418E
-:10301000235000000000804081B201000C002D1000
-:1030200048B10100FF070015828C0100FF0700F086
-:10303000008C01000000A24100EC00000796220D68
-:10304000006C0000E29500001A3001000000005002
-:1030500049C101000396A2412350000000008040B6
-:1030600081B201000C96831E8032000000000044F3
-:103070001990010024002D012CB0010028002DF032
-:1030800016B0010022002DF026B0010014002FF22E
-:103090000CB0010000008040E1B1010002002D11E0
-:1030A00010C100001596004043C100001596005065
-:1030B00043C10000200000A142C901001A9622402D
-:1030C000F56D00000000004243D101000400A24061
-:1030D000E57D00000000004023B0010000008049B1
-:1030E0001F9001001D9622111E7C00001F96A0F06B
-:1030F000164000001F96004117C000001F96A0F464
-:10310000164000000000004117C001000000A2416D
-:1031100023D000001596005243D1000000B5000DE9
-:1031200042C9010022963047170400002596A20BE1
-:10313000E67D00000000904281B0010000B7000D64
-:1031400046C901002996A20BE67D00000000000B95
-:10315000E69101000000904181B0010000001040A4
-:1031600081B201002A96400796300000F399004092
-:10317000813201003496A245957C000001973F41C1
-:1031800095E00100000000F396B001000000004E41
-:10319000E6B1010040973E4097E001000000004E7C
-:1031A000E6B1010040973E409DE001004796003B9C
-:1031B000E7B1000034963040813200003E96A20B09
-:1031C000E67D000000B5000D46C901003A96A20B4D
-:1031D000E67D00000000104081B20100000098422E
-:1031E00081B0010000B7000D46C901000000000BCE
-:1031F000E69101000000104081B2010000009841FA
-:1032000081B00100040021A2952000000000104AB6
-:103210004483010000973E4195E001000000004E0C
-:10322000F6B101000000004EE6B1010040973E40BB
-:103230009DE001000000003BE7B101000000004AF2
-:1032400090B10100FFFF0007928901000000984043
-:1032500081B001000300000886F4010000B70043BC
-:1032600046C9010007000008828801004B9640080B
-:1032700096300000F39900408132010057962245B4
-:10328000957C00005396225A1F7C00001000000F0E
-:1032900096F401005096315F970400000000114B36
-:1032A000489301000000004B6AB101005396304082
-:1032B0008132000000000041E68101000000104062
-:1032C00081B201000000984081B2010000973F41A7
-:1032D00095E00100000000F396B0010040973D40EA
-:1032E00097E00100000063F388B001005F96A23B05
-:1032F000896C00000000004A90B10100010000A6A6
-:1033000092B101006096184A4493000000001840F2
-:1033100081B201003000394597E001006596225ADC
-:103320001F7C00001F04000F98D801000000004C13
-:103330005E940100679600054AB000001F0400A7D4
-:103340005E840100000000404BB001000000005806
-:1033500061B101000000004B62B101000000A84013
-:1033600081B200006896004081B200006B96400771
-:1033700096300000F3990040813201006F9622459B
-:10338000957C00000000984081B20100F199004A4C
-:103390004413010000973F4195E00100000000F355
-:1033A00096B0010040973D4097E00100000063F3B4
-:1033B00088B001003000384597E001000000005F50
-:1033C0000F9001000000005861B101000000004BA7
-:1033D00062B101007796A840813200007096A23B4E
-:1033E000896C0000300038459DE0010000009840E5
-:1033F00081B20100E9990012943001004896005A08
-:103400001F0001000000805A1F9001001100004AB7
-:10341000E6C9010034002F4F95840100000000F33D
-:1034200096B001000100634B84C801000000A04376
-:10343000856C01000000E34085B0010030002D44A0
-:103440001F90010032002DF22AB00100040022F288
-:103450000230000066950010323001003200A040BA
-:10346000E5B101000000004097B00100F007004006
-:10347000999801000000004A02C0010000000050BD
-:1034800003D001000000004197C001000000A34CE0
-:1034900002D000008E96004081B20000000000A81B
-:1034A00036B001009E9622410350000000800010BB
-:1034B00044C9010000000050F1B101007000000398
-:1034C000F0C901000000004261B1010000000010DD
-:1034D00062B101009796A800E03100001B840088CB
-:1034E0001CB00000E2950040813201007C800003A6
-:1034F00042C90100000000F000B001009296005C9B
-:1035000001800000E2950040813201000000001BB4
-:1035100010B1000068012D0682B00100000000F229
-:1035200082C001000080000346C90100DD95004013
-:1035300081320100C5962240116C0000000068082D
-:1035400038960100F007004182CC0100A396AA4101
-:103550003B400000000000F810B001000000005CDB
-:10356000118001000100001D04CC0100C496264614
-:10357000233000000800000312C80100640120F09D
-:10358000E0B10100C3962241055000002000000375
-:1035900048C901000C0000F886C801000000224460
-:1035A000F1B1010000000043F0B10100000000098A
-:1035B000E0B101000000004461B10100A00000A4DE
-:1035C00062DD0100B596A8461F100000C296224198
-:1035D00005500000C096A24123500000000000A149
-:1035E0001AB001000000004461B101004000001069
-:1035F00062DD0100BB96A846233000001B840088D2
-:103600001CB000001000000348C901000000000DBC
-:1036100042B101000000004413C00100B096005008
-:1036200049C100000000000548B10100048000030A
-:103630001AC801000000804081B20100C4962240F7
-:103640003B6C0000000000F800B00100E295005C57
-:1036500001000100C59600413BD0000000008D47ED
-:1036600080320100B0002F5F13B001000000E0F0D5
-:103670008CC001000080000342C90100000000F876
-:1036800094B00100000000F88CB00100D1968CF8D5
-:103690008E3000000000004419900100040022F860
-:1036A00014300000000000F816B00100000000F81F
-:1036B00026B0010008002EF80CB001000C002A4AC8
-:1036C000E0B1010028000000E0C901001000201B4B
-:1036D000E0B10100DE96200A0C6C0000000000F84A
-:1036E00094B00100000000F896B00100200020F026
-:1036F000E4B101001800204AE0B101001C00204B99
-:10370000E0B10100C996004013B000002C002D422A
-:10371000199001002E002FF382B00100000000F389
-:1037200096B00100E496A2A5976C000000008041CD
-:1037300095B00100E796A240976C000000000040A1
-:1037400083B001002D002040E7B10100000063417B
-:1037500097C00100D4003E4183E001000000004119
-:1037600083C00100EC96A0A5836C0000000000401F
-:1037700083B001002C002041E6B10100F196224007
-:103780001F7C00000004000098DC01000B00004CCE
-:10379000E4F50100000080401F8001000B00800064
-:1037A000E4F50100E6950040813201000480000349
-:1037B00044C9010000000040F1B1010000000040D8
-:1037C000F1B101000000604187B0010000800010ED
-:1037D00044C9010000000050F1B1010000000048A0
-:1037E000F0B1010000000049F0B101000000000349
-:1037F000E0B101000000004561B1010020000010AF
-:1038000062DD01000000A85D05900000FD9600400B
-:1038100081B20000E6950040813201000080000383
-:1038200044C9010000000041F0B101000000004265
-:10383000F0B1010000000040F1B1010000000043C0
-:10384000F0B101000080001044C9010000000050E8
-:10385000F1B1010000000048F0B101000000004992
-:10386000F0B1010000000003E0B1010000000045DC
-:1038700061B101002000001062DD01000000A85DC0
-:10388000059000000C97004081B200002D00004020
-:10389000439901002E002FF384B00100010063F36F
-:1038A00096C8010014979F4185500000010000A5B3
-:1038B00085CC01002D00A042E6B101005E012D0083
-:1038C00080B001001997524381600000020000F2AD
-:1038D00082F401001A970041809400000000005F0C
-:1038E000819001000000005E61B101000000004015
-:1038F00062B101000000A84095B000001B979EBB7C
-:10390000803200002097A2401F7C0000E29500401A
-:1039100081B200000000804195B001000400001554
-:1039200042C90100000000542BC00100000000FC4F
-:1039300024B00100000000FC38B00100000000FECF
-:103940003CB00100000000FE3AB0010035979C1722
-:10395000803200002A97A24A197C00000000804CA7
-:103960001F9001000C00001E98F401002997A24846
-:10397000996C00000000001542B101002997A28A4D
-:10398000F16D00000C00000102CC0100000000FC01
-:103990003EB00100010000F428CC0100CC002D0550
-:1039A00048B10100349720F03E6C00000000004B4D
-:1039B0001F9001000000004C2BC00100BF002D052E
-:1039C00048B10100000080F33AE0010000002E4BF6
-:1039D0001990010007002A0CE4B1010000008004E6
-:1039E000E6B1010018000040439901001C002DF0D1
-:1039F00016B0010020002DF026B001000C002FF2BF
-:103A00000CB001000000A20614EC00004197224512
-:103A10001F7C00000000A3062AEC0000000000F854
-:103A200094B00100000000F096B001000C002D40A1
-:103A300081B2010000002A4CE1C1010030000010F9
-:103A400048C901000A000040F19901001800000572
-:103A5000F0C901000000004AF0B101000000004B75
-:103A6000E0B101000000004761B10100A00000A426
-:103A700062DD01004B97A85C1F100000000080056C
-:103A800048B1010000002E1048B10100000068019B
-:103A900096B0010000000003F0B1010051974542CB
-:103AA000613100000000001062B101005297A800CF
-:103AB000E031000000009D4081B2010000002E10A6
-:103AC00048B101000000680196B001000000000349
-:103AD000F0B101005897454261310000200000100C
-:103AE00062DD01005997A800E031000000009D4010
-:103AF00081B201003080004A44C901000000000684
-:103B0000F1B10100C0A83D460DE00100FF7F00A11A
-:103B1000F08901000200000996F40100000000464F
-:103B200097E00100000060A897C00100639746423B
-:103B3000613100003000004A62C901006497A8406A
-:103B40008132000000009E4081B2010000993F4296
-:103B500097F001006897474081320000709722F388
-:103B6000740600003F0000F3948801000000000785
-:103B7000E785010000001F5561B101000000004A07
-:103B800062B101000000A84081B200006D970040C2
-:103B900081B2000000009F4081B20100000000A837
-:103BA00036B0010080978241234000007597A244FF
-:103BB0001F7C0000EF9400018C3001002080001079
-:103BC00042C901007B972240E36D000000000043E2
-:103BD00061B101004000001062DD01007897A8404B
-:103BE000813200001B8400881CB0000000000041EE
-:103BF00023B001000000001032B001008097224184
-:103C0000197C0000F89500432330010000000041BA
-:103C100023B001008297A3150C6C00008397000667
-:103C200004B000000000001504B0010085972002D8
-:103C30001A6C00000000000D04B001000700000B2A
-:103C4000968801008A9726479724000000000041CB
-:103C500097C001008A97234B046C00000000004BC2
-:103C600004B001004998000548310100B4972202D0
-:103C7000145000008E97A2022A500000B497A2456B
-:103C80001F7C0000909722020C50000099970002C0
-:103C900016C000009897225C1F7C00003080001046
-:103CA00042C9010098972240E36D000000000047E0
-:103CB00061B101004000001062DD01009497A8404E
-:103CC000813200001B8400881CB000000000000549
-:103CD00048B101003A97005C1F000100B49722151B
-:103CE000803200000000005033C00100B397A202F0
-:103CF0001A500000A59722461F7C00007080000328
-:103D000042C90100000000461F800100A597224023
-:103D1000E36D00000000004261B1010040000010AE
-:103D200062DD0100A197A840813200001B84008859
-:103D30001CB000000000000548B101000C80000329
-:103D400042C90100100000F010C801002F002F5CD4
-:103D50001180010000000047E7910100F0070040DA
-:103D60001B980100729720151A6C00007000000368
-:103D700048C9010000002250F1B101000000000319
-:103D8000F0B10100FF070008E08D010000000042D3
-:103D900061B10100A00000A462DD0100B097A84657
-:103DA0001F1000007297000548B1000072970002D2
-:103DB00010C00000B697A2441F7C0000EF940001E1
-:103DC0008C3001000000001B10B1000000800010CA
-:103DD00044C901000C000040F199010010000008E6
-:103DE000F0C9010000000016F0B10100100000034E
-:103DF000E0C901000000004561B101002000001091
-:103E000062DD01000000A85C1F900000BD9700402B
-:103E100081B20000170000D0A2C901000000A2403A
-:103E200027EC00000000002000B00100E2950041F6
-:103E3000A3410100C197004127D0000010000007F6
-:103E400096E401000000004B809401000000005443
-:103E500061B101000080004062DD01000000A84067
-:103E600081B20000C897004081B200001A9800405B
-:103E70002B300100AC002D0616C0010090002DF083
-:103E800016C40100D097A0F01644000000000041C5
-:103E900017C001000E0000A244C9010000006CF030
-:103EA00030B00100AC002D4087B0010000006CF084
-:103EB00028B00100D997224A197C00000030004345
-:103EC00086C801000030000B16C80100D997A44035
-:103ED000813200000000004117C00100FA9722065D
-:103EE00080320000E697A206146C0000E397224897
-:103EF000197C0000DE97A04117400000000000413F
-:103F000017C001000000004131C0010090002018DE
-:103F1000E0B101008B002D48198001008B00204585
-:103F2000E7910100E69700408790000008000043F9
-:103F300086980100E697A048174000000000004165
-:103F400017C00100B0000040439901001050004329
-:103F5000FCC9010051980030813001000000004090
-:103F6000E5B10100F197224A197C0000080000A287
-:103F700044C90100CC002DABF9B10100000000AB39
-:103F800017C00100F097A0F01644000000000041A7
-:103F900017C00100F59764F082B00000A400004053
-:103FA00047990100F597A2F280320000000000411D
-:103FB000E5B101008C002018E0B101009000004044
-:103FC000459901000000600630C001000000860C29
-:103FD00080B20000BC002D4619900100A000A0F2A4
-:103FE000E4B10100B00000404399010010500043CB
-:103FF000FCC9010051980030813001000000A24A44
-:1040000019FC0000080000A244C90100CC002DAB3F
-:10401000F9B10100000000AB17C001000398A0F047
-:10402000164400000000004117C001000000E4F049
-:1040300082B001000080001044C90100000000416E
-:10404000F0B1010000000003F0B101000000000029
-:10405000F0B101000000001062B101000000A81BD7
-:10406000E0B100000898004081B2000000F0000CB0
-:104070007E8901000000A64C956001000000804A86
-:10408000189401000080001044C9010004002201BE
-:10409000F031000020000040F0C9010000000016CF
-:1040A000F0B101000000004361B1010020000010E8
-:1040B00062DD01000000A815E0B100001398004087
-:1040C00081B200001080000344C901000000000616
-:1040D000F0B1010000000001F0B101000000E85F54
-:1040E0001790010070000040439901007A012EFEF4
-:1040F00092B001008B002DF616B0010020982243EB
-:10410000E77D00000000004445C10100040000A656
-:104110002AB0010028006E0682C801002498224AB5
-:10412000197C00000000004245D1010000006E4CE7
-:1041300083C001000000004192C001002598423078
-:104140003D0700000000669E83B0010000001A4198
-:104150003DC301000000004192C00100060000A222
-:1041600044C901001000004998F401002E9826303F
-:10417000930400002E98904C9240000000000041F3
-:1041800093C00100FFFF8049ECA9010000800010EE
-:1041900044C9010004002201F031000000000009C0
-:1041A000F0B1010000000018F0B101002000001083
-:1041B00062DD01000000A815E0B100003398004066
-:1041C00081B200004098225F817C00003F98A240AD
-:1041D000197C00000000004019900100000000540C
-:1041E00061B101001000000796E401000000004FDB
-:1041F000979401000000004B62B101003F982840F5
-:10420000813200003C98004081B200000000A221F1
-:10421000818400004398A25F816C00000000A243EB
-:10422000197C0100000000431990010000000054B7
-:1042300061B101001000000796E401000000004099
-:10424000969401000000004B62B101000000A840FC
-:1042500081B200004698004081B200000080001941
-:1042600044C9010004002202F03100000000000BEC
-:10427000F0B1010000000013F0B1010000000043A4
-:1042800061B101002000001962DD01000000A808F2
-:10429000E0B100004E98004081B200007C002DF09B
-:1042A00084B00100020000F098F401005798204CFF
-:1042B000846C00008800004043990100579820F268
-:1042C000846C00000000004085B0010098002D14AF
-:1042D00082B00100000000F098B00100A3002D148E
-:1042E00098D001005C98204C846C00000000004CC9
-:1042F00084B00100000000F380E001005F982340DB
-:10430000846C00000000004084B00100D000201444
-:10431000E0B101009800254280B0010000006EF37A
-:1043200080F001000000A64282C000006598A04015
-:10433000164000000000004117C0010000009FF07F
-:1043400082EC00009800A041E0B1010068980012E2
-:1043500010C90000004880400B980100C04980400F
-:104360000B980100804B80400B980100404D80402D
-:104370000B980100004F80400B980100C050804016
-:104380000B980100805280400B98010040548040FF
-:104390000B980100005680400B980100C0578040E8
-:1043A0000B980100805980400B980100405B8040D1
-:1043B0000B980100005D80400B980100C05E8040BA
-:1043C0000B980100806080400B98010040628040A3
-:1043D0000B980100006480400B980100C06580408C
-:1043E0000B980100806780400B9801004069804075
-:1043F0000B980100006B80400B980100C06C80405E
-:104400000B980100806E80400B9801004070804046
-:104410000B980100007280400B980100C07380402F
-:104420000B980100807580400B9801004077804018
-:104430000B980100007980400B980100C07A804001
-:104440000B980100807C80400B980100407E8040EA
-:104450000B98010088984357613100009498A25747
-:10446000737D00009498A240816F00000000004816
-:1044700061B101000010004A62DD01008C98A84A79
-:10448000803300009198225F957C00000000004B73
-:1044900062B101008F98A84BAC33000000001BA54F
-:1044A00082B30100000000BE83C301000000804011
-:1044B00097B001000010004A62DD01009898284082
-:1044C0008132000094982257777D000000009B20E5
-:1044D00097B001000000004B62B101009898A8401D
-:1044E0008132000000009B4097B0010000002E10B8
-:1044F00048B10100A8010040F19901000000000549
-:10450000F0B101000900000796E40100000060A777
-:1045100097C001000000001062B101000000A84037
-:1045200081B20000A098004081B20000A8002D1CBC
-:104530008AB0010000009FF08AD000000000A24075
-:104540008BEC00008A002040E7B10100B40000407D
-:1045500047990100A4002D45E0D10100AD989C17BA
-:1045600080320000BE002FAB83B001001799001409
-:1045700082500100B298004081B20000B29822F24D
-:10458000823000008C00004043990100B2989F1CCB
-:10459000E06D0000BE0000404799010017990040FF
-:1045A00081320100A800201CE0B101009C002D30E8
-:1045B00081B0010088002DF084B0010094002DF23C
-:1045C00086B00100DC9823F0846C00000C000042EF
-:1045D00088F40100DC982050896C0000CB98A392ED
-:1045E000876C0000BB98004410C90000DC98000AEA
-:1045F00087B00000DC98000987B00000DC98000854
-:1046000087B00000DC98000787B00000DC98000746
-:1046100087B00000DC98000787B00000DC98000637
-:1046200087B00000DC98000687B00000DC98000628
-:1046300087B00000DC98000687B00000DC98000618
-:1046400087B00000DC98000587B00000DC9800050A
-:1046500087B00000DC98000587B00000DC980005FA
-:1046600087B00000DC98000587B00000CC980044BB
-:1046700010C90000DC98000F87B00000DC98000E25
-:1046800087B00000DC98000D87B00000DC98000CBB
-:1046900087B00000DC98000C87B00000DC98000CAC
-:1046A00087B00000DC98000C87B00000DC98000C9C
-:1046B00087B00000DC98000C87B00000DC98000B8D
-:1046C00087B00000DC98000B87B00000DC98000B7E
-:1046D00087B00000DC98000B87B00000DC98000B6E
-:1046E00087B00000DC98000B87B00000DC98000B5E
-:1046F00087B00000BF002D4384C0010090002DF35F
-:1047000080E00100E1982340846C00009400209D2B
-:10471000E1B101000000004084B00100E598A2F082
-:10472000386C00009C002042E0B101000000005FF6
-:104730001394010000008046198001009C00204273
-:10474000E0B101003700004043990100040000F38C
-:1047500080F401000F0000F382880100EB982341F0
-:10476000806C00000000005F139401000000890CC1
-:1047700080B20000BC00004043990100A000A0F2FC
-:10478000E4B1010000009F4124EC0000F598A64030
-:104790008132000000009F4238EC0000F598A640EE
-:1047A00081320000B400004043990100F798A3F063
-:1047B0003A6C00000000804081B20100B40000406B
-:1047C00043990100FB9822F03A6C0000B400201DD0
-:1047D000E0B1010080002D5F13940100FB9823F0ED
-:1047E0003A6C00008000201DE0B10100C0002012E2
-:1047F000E0B10100C400A01CE0B101000080000392
-:1048000044C9010000000042E0B101001200004074
-:104810008798010004999F41246C0000000000412A
-:104820008CB00100000000128CD0010005990041FD
-:1048300024B00000000000408DB0010055990040F8
-:10484000813201000000004561B10100400000100C
-:1048500062DD01000000A84081B20000079900401D
-:1048600081B20000D49500408132010000000016A2
-:1048700080B201000000A708803201000F99A24019
-:10488000956C0000E295004081320100008200A694
-:1048900004B00100000000402DB00100A0982F409E
-:1048A00011B00100E989004189B0000000009FF8C3
-:1048B0003EEC000000009F12E0ED0000C80020ABBD
-:1048C000E1B10100CC00A01FE0B101001999A35F84
-:1048D000E76D000000000041E7C10100A6000040B4
-:1048E000479901002D9922F2863000000300004311
-:1048F00084F401000100004180CC0100B8002D4289
-:1049000080D001000000624086C0010021991F4351
-:10491000803200002299A240876C000000006241B2
-:1049200087B0010026999F408032000000000040BF
-:1049300085B001000000004084D00100000000426A
-:1049400080B00100000000F288B0010002000044C5
-:1049500084F40100B8002E4280D0010000006240C3
-:1049600088C001002C991F44803200003099A24079
-:10497000896C00003099624189B0000003006241F7
-:1049800086E40100B8000040459901000100624141
-:1049900088E40100A4002040E5B10100A20020400D
-:1049A000E7B10100BC002E4387F001000000004485
-:1049B00086C0010036992043876C000000008043C8
-:1049C000E5B101004001004380CE01000000A44396
-:1049D000E43101004001E2408798010088002D4445
-:1049E00081B0010090002DF22EB001009C002DF04E
-:1049F00086B0010090002DF082B00100BA002DF0C9
-:104A000098B001004399A212986C0000BC002DF2EE
-:104A100098B001004399A0F2986C000000000017C4
-:104A200082B001009C002041E0B10100B4002D12D1
-:104A300086D001004699A341E06D0000479900F03F
-:104A400084B000000000004184B0010080002D43CC
-:104A500084D001004A999F4280320000000000404B
-:104A600085B001004C99A342146C00004D99000AD6
-:104A70000CB00000000000420CB001004F99A017DC
-:104A80000C6C0000000080170CB00100549922400B
-:104A90000D6C00000000A00A0CEC0000010000F00A
-:104AA00082F401005499A0410C6C00000000A2F0B7
-:104AB000803201000000804081B00100E695004096
-:104AC000813201000480000344C901000000004657
-:104AD000F0B1010000000040F1B1010000006041B0
-:104AE000879401000080001044C9010000000050BC
-:104AF000F1B1010000000048F0B1010000000049E0
-:104B0000F0B1010000000003E0B101000000004529
-:104B100061B101002000001062DD01000000A85D0D
-:104B2000059000006099004081B2000000002E4B0B
-:104B30001990010005002A0CE4B101000000800476
-:104B4000E6B101006A9922491F7C00004200004042
-:104B500087980100000000491F800100C0970040B5
-:104B60008DB0000070992240AF6F0000000000156A
-:104B700096B0010088980008943001006F99224097
-:104B8000976C0000C097004687B00000000080408E
-:104B900087B001007099434861310000001000089F
-:104BA00062DD010075992840873000007199224824
-:104BB000777D0000C0971B4687B000007899225F80
-:104BC000117C000004002215623100007699A84093
-:104BD0008132000000009B4081B2010000000040D3
-:104BE00049B1010030000040A199010000000040DF
-:104BF00093B00100000000401FB00100C9990049B6
-:104C0000963001000700004906E401000039000366
-:104C100006C801000000004005B00100200000D0DF
-:104C2000A0C901000000004193C001007D99A0547B
-:104C3000936C000000002E0597B001000048004072
-:104C40004999010000000040E1B10100C00100A24B
-:104C500044C901008699A24197500000000000203D
-:104C600049B30100CE9900404931010000B52E083A
-:104C700097B0010000000040F1B101008C99A24101
-:104C800097500000180000409798010000972E40B0
-:104C900081B2010000000040F1B101009099A241F1
-:104CA000975000000000004049B1010040182E0557
-:104CB00097B0010000000040F1B101009499A241B9
-:104CC0009750000057952040E7B101003094004014
-:104CD0004599010064000040E59901005695204087
-:104CE000E7B10100B8942041E5B10100BA94204138
-:104CF000E5B1010098940040459901000200004090
-:104D00009798010000000040F1B101009E99A24176
-:104D1000975000000000004097B0010000000040E4
-:104D20006FB101000000004B68B10100A2998541FC
-:104D300097400000DB9900408132010000000040F4
-:104D400039B301000000004037B30100000000400B
-:104D500035B301000000004033B301000000004003
-:104D600041B30100000000403FB301003C0000409F
-:104D7000299B0100EE050040259B010042000040F8
-:104D80004B9B0100000000402FB3010000000040D9
-:104D90002DB301000000004047B3010000000040B7
-:104DA00043B30100600000402B9B01000000005451
-:104DB000EF93010000000055F1930100FFFF00A5F3
-:104DC0003C8B01000000002C5BB301000000002CB4
-:104DD00045B301000000004059B30100000000404D
-:104DE00057B301000000004027B30100000000405D
-:104DF00053B30100BF99A250FD7F0000BF99A2519B
-:104E0000FD7F0000C09900401DB3000050460040E7
-:104E10001D9B010000C000A688B30100FF3F00A653
-:104E20003AB3010000C0009D3B9B0100B405004067
-:104E3000239B0100000000404DB30100080A00A6BA
-:104E400014B301000101008A159B0100008000A637
-:104E500056B101000000805E57B501001800004BFC
-:104E600020E401000600004B96E401000043004BE3
-:104E700096C801001800001020DC01000000804BE3
-:104E80002094010000992E0A97B001000000004014
-:104E9000F1B10100CF99A2419750000000030040FA
-:104EA0009798010000A900404599010000000040CA
-:104EB000F1B10100D399A2419750000030000040A9
-:104EC000979801000000005561B101000000004BFF
-:104ED00062B10100D799A84081320000D799A24160
-:104EE000975000000000804081B2010000000040A7
-:104EF00087B101000000004097B001000000004BA6
-:104F000080B10100010000A682B10100DD99854158
-:104F1000974000000000004097B1010000000040F1
-:104F200097B001000000004B90B10100010000A605
-:104F300092B10100E2998541974000000000804055
-:104F400081B20100E6994440813200000000001265
-:104F500080B10100FFFF9C4B82890100E999444028
-:104F6000813200000000004A80B1010001009CA6CF
-:104F700082B10100EC99444081320000FFFF004BF8
-:104F80008489010000009CC224B001000000004A96
-:104F900090B10100FFFF804B928901000000004AA0
-:104FA00090B10100010080A692B10100FFFF004B0B
-:104FB00094890100000080CA94B001000000804084
-:104FC00081B201000000004081B00100F79980A586
-:104FD00080320000F89900A58032000000000041F6
-:104FE00081C00100F99980A5803200008001004055
-:104FF00083980100029A204F816C0000000100405C
-:1050000083980100029A204B816C000080000040D0
-:1050100083980100029A2047816C00000000004044
-:10502000839801000000004182DC010003900041F0
-:10503000209901000000004049B1010000142F4CEC
-:1050400083B0010000000040F1B10100069AA241C6
-:1050500083500000640000A580C80100099AA2A541
-:10506000806C000020000090209901000000005F8B
-:10507000239101000C9A1F918032000030000090B3
-:10508000209901000000005F239101000F9A1F91F9
-:10509000803200007000009020A901000000005F35
-:1050A00023910100129A1F91803200000000005FDE
-:1050B00023910100149A1F918032000040680090F3
-:1050C00020A90100E000004061990100210000409A
-:1050D0006199010022000040619901002300004015
-:1050E0006199010024000040619901002500004001
-:1050F00061990100260000406199010027000040ED
-:1051000061990100C000004061990100D014004085
-:105110004599010000000040F1B10100000000408D
-:10512000E1B101003003004085300100D01400409F
-:1051300045990100020100A680B00100040300406F
-:1051400080980100060500A682B001000807004112
-:105150008298010000000040F0B101000000004111
-:10516000E0B10100080000408598010030030040D4
-:10517000813201003903004081320100D81400401F
-:1051800043990100FF02A2F8806C0000000322F0A6
-:10519000826C0000FF02004081B20000D0142E405B
-:1051A00049B1010005000040A39B01000000004040
-:1051B000C1B30100080000DD81F40100369A00400F
-:1051C00010C900003C9A000581B000005501004064
-:1051D00081B20000449A000581B0000055010040F2
-:1051E00081B20000499A0044A5B300004B9A0044E4
-:1051F000A5B3000002000040A4E70100000000E0A9
-:1052000081B10100FFFF00C1F0890100419A2241F4
-:10521000815000003D9A0041C1C30000B10200402E
-:1052200081320100C5020040813201005A01004074
-:1052300081B2000002000040A4E70100000000E08D
-:1052400091B10100FFFF00C9F0890100419A22419C
-:1052500081500000459A0041C1C30000FFFF00DEFD
-:1052600085890100419A00C2E0B10000FFFF00DE25
-:1052700095890100419A00CAE0B10000040000CB0A
-:1052800081C801006A840040F293000004000040DD
-:1052900081B200000400004081B200000400004020
-:1052A00081B200000400004081B200000400004010
-:1052B00081B200000400004081B200000400004000
-:1052C00081B200000400004081B2000004000040F0
-:1052D00081B200000400004081B2000004000040E0
-:1052E00081B200000400004081B2000004000040D0
-:1052F00081B200000400004081B2000004000040C0
-:1053000081B200000400004081B2000004000040AF
-:1053100081B200000400004081B20000040000409F
-:1053200081B200000400004081B20000040000408F
-:1053300081B200000400004081B20000040000407F
-:1053400081B200000400004081B20000040000406F
-:1053500081B200000400004081B20000040000405F
-:1053600081B200000400004081B20000040000404F
-:1053700081B200000400004081B20000040000403F
-:1053800081B200000400004081B20000040000402F
-:1053900081B200000400004081B20000040000401F
-:1053A00081B200000400004081B20000040000400F
-:1053B00081B200000400004081B2000004000040FF
-:1053C00081B200000400004081B2000004000040EF
-:1053D00081B200000400004081B2000004000040DF
-:1053E00081B200000400004081B2000004000040CF
-:1053F00081B200000400004081B2000004000040BF
-:1054000081B200000400004081B2000004000040AE
-:1054100081B200000400004081B20000040000409E
-:1054200081B200000400004081B20000040000408E
-:1054300081B200000400004081B20000040000407E
-:1054400081B200000400004081B20000040000406E
-:1054500081B200000400004081B20000040000405E
-:1054600081B200000400004081B20000040000404E
-:1054700081B200000400004081B20000040000403E
-:1054800081B200000400004081B20000040000402E
-:1054900081B200000400004081B20000040000401E
-:1054A00081B200000400004081B20000040000400E
-:1054B00081B200000400004081B2000004000040FE
-:1054C00081B200000400004081B2000004000040EE
-:1054D00081B200000400004081B2000004000040DE
-:1054E00081B200000400004081B2000004000040CE
-:1054F00081B200000400004081B2000004000040BE
-:1055000081B200000400004081B2000004000040AD
-:1055100081B200000400004081B20000040000409D
-:1055200081B200000400004081B20000040000408D
-:1055300081B200000400004081B20000040000407D
-:1055400081B200000400004081B20000040000406D
-:1055500081B200000400004081B20000040000405D
-:1055600081B200000400004081B20000040000404D
-:1055700081B200000400004081B20000040000403D
-:1055800081B200000400004081B20000040000402D
-:1055900081B200000400004081B20000040000401D
-:1055A00081B200000400004081B20000040000400D
-:1055B00081B200000400004081B2000004000040FD
-:1055C00081B200000400004081B2000004000040ED
-:1055D00081B200000400004081B2000004000040DD
-:1055E00081B200000400004081B2000004000040CD
-:1055F00081B200000400004081B2000004000040BD
-:1056000081B200000400004081B2000004000040AC
-:1056100081B200000400004081B20000040000409C
-:1056200081B200000400004081B20000040000408C
-:1056300081B200000400004081B20000040000407C
-:1056400081B200000400004081B20000040000406C
-:1056500081B200000400004081B20000040000405C
-:1056600081B200000400004081B20000040000404C
-:1056700081B200000400004081B20000040000403C
-:1056800081B200000400004081B20000040000402C
-:1056900081B200000400004081B20000040000401C
-:1056A00081B200000400004081B20000040000400C
-:1056B00081B200000400004081B2000004000040FC
-:1056C00081B200000400004081B2000004000040EC
-:1056D00081B200000400004081B2000004000040DC
-:1056E00081B200000400004081B2000004000040CC
-:1056F00081B200000400004081B2000004000040BC
-:1057000081B200000400004081B2000004000040AB
-:1057100081B200000400004081B20000040000409B
-:1057200081B200000400004081B20000040000408B
-:1057300081B200000400004081B20000040000407B
-:1057400081B200000400004081B20000040000406B
-:1057500081B200000400004081B20000040000405B
-:1057600081B200000400004081B20000040000404B
-:1057700081B200000400004081B20000040000403B
-:1057800081B200000400004081B20000040000402B
-:1057900081B200000400004081B20000040000401B
-:1057A00081B200000400004081B20000040000400B
-:1057B00081B200000400004081B2000004000040FB
-:1057C00081B200000400004081B2000004000040EB
-:1057D00081B200000400004081B2000004000040DB
-:1057E00081B200000400004081B2000004000040CB
-:1057F00081B200000400004081B2000004000040BB
-:1058000081B200000400004081B2000004000040AA
-:1058100081B200000400004081B20000040000409A
-:1058200081B200000400004081B20000040000408A
-:1058300081B200000400004081B20000040000407A
-:1058400081B200000400004081B20000040000406A
-:1058500081B200000400004081B20000040000405A
-:1058600081B200000400004081B20000040000404A
-:1058700081B200000400004081B20000040000403A
-:1058800081B200000400004081B20000040000402A
-:1058900081B200000400004081B20000040000401A
-:1058A00081B200000400004081B20000040000400A
-:1058B00081B200000400004081B2000004000040FA
-:1058C00081B200000400004081B2000004000040EA
-:1058D00081B200000400004081B2000004000040DA
-:1058E00081B200000400004081B2000004000040CA
-:1058F00081B200000400004081B2000004000040BA
-:1059000081B200000400004081B2000004000040A9
-:1059100081B200000400004081B200000400004099
-:1059200081B200000400004081B200000400004089
-:1059300081B200000400004081B200000400004079
-:1059400081B200000400004081B200000400004069
-:1059500081B200000400004081B200000400004059
-:1059600081B200000400004081B200000400004049
-:1059700081B200000400004081B200000400004039
-:1059800081B200000400004081B200000400004029
-:1059900081B200000400004081B200000400004019
-:1059A00081B200000400004081B200000400004009
-:1059B00081B200000400004081B2000004000040F9
-:1059C00081B200000400004081B2000004000040E9
-:1059D00081B200000400004081B2000004000040D9
-:1059E00081B200000400004081B2000004000040C9
-:1059F00081B200000400004081B2000004000040B9
-:105A000081B200000400004081B2000004000040A8
-:105A100081B200000400004081B200000400004098
-:105A200081B200000400004081B200000400004088
-:105A300081B200000400004081B200000400004078
-:105A400081B200000400004081B200000400004068
-:105A500081B200000400004081B200000400004058
-:105A600081B200000400004081B200000400004048
-:105A700081B200000400004081B200000400004038
-:105A800081B200000400004081B200000400004028
-:105A900081B200000400004081B200000400004018
-:105AA00081B200000400004081B200000400004008
-:105AB00081B200000400004081B2000004000040F8
-:105AC00081B200000400004081B2000004000040E8
-:105AD00081B200000400004081B2000004000040D8
-:105AE00081B200000400004081B2000004000040C8
-:105AF00081B200000400004081B2000004000040B8
-:105B000081B200000400004081B2000004000040A7
-:105B100081B200000400004081B200000400004097
-:105B200081B200000400004081B200000400004087
-:105B300081B200000400004081B200000400004077
-:105B400081B200000400004081B200000400004067
-:105B500081B200000400004081B200000400004057
-:105B600081B200000400004081B200000400004047
-:105B700081B200000400004081B200000400004037
-:105B800081B200000400004081B200000400004027
-:105B900081B200000400004081B200000400004017
-:105BA00081B200000400004081B200000400004007
-:105BB00081B200000400004081B2000004000040F7
-:105BC00081B200000400004081B2000004000040E7
-:105BD00081B200000400004081B2000004000040D7
-:105BE00081B200000400004081B2000004000040C7
-:105BF00081B200000400004081B2000004000040B7
-:105C000081B200000400004081B2000004000040A6
-:105C100081B200000400004081B200000400004096
-:105C200081B200000400004081B200000400004086
-:105C300081B200000400004081B200000400004076
-:105C400081B200000400004081B200000400004066
-:105C500081B200000400004081B200000400004056
-:105C600081B200000400004081B200000400004046
-:105C700081B200000400004081B200000400004036
-:105C800081B200000400004081B200000400004026
-:105C900081B200000400004081B200000400004016
-:105CA00081B200000400004081B200000400004006
-:105CB00081B200000400004081B2000004000040F6
-:105CC00081B200000400004081B2000004000040E6
-:105CD00081B200000400004081B2000004000040D6
-:105CE00081B200000400004081B2000004000040C6
-:105CF00081B200000400004081B2000004000040B6
-:105D000081B200000400004081B2000004000040A5
-:105D100081B200000400004081B200000400004095
-:105D200081B200000400004081B200000400004085
-:105D300081B200000400004081B200000400004075
-:105D400081B200000400004081B200000400004065
-:105D500081B200000400004081B200000400004055
-:105D600081B200000400004081B200000400004045
-:105D700081B200000400004081B200000400004035
-:105D800081B200000400004081B200000400004025
-:105D900081B200000400004081B200000400004015
-:105DA00081B200000400004081B200000400004005
-:105DB00081B200000400004081B2000004000040F5
-:105DC00081B200000400004081B2000004000040E5
-:105DD00081B200000400004081B2000004000040D5
-:105DE00081B200000400004081B2000004000040C5
-:105DF00081B200000400004081B2000004000040B5
-:105E000081B200000400004081B2000004000040A4
-:105E100081B200000400004081B200000400004094
-:105E200081B200000400004081B200000400004084
-:105E300081B200000400004081B200000400004074
-:105E400081B200000400004081B200000400004064
-:105E500081B200000400004081B200000400004054
-:105E600081B200000400004081B200000400004044
-:105E700081B200000400004081B200000400004034
-:105E800081B200000400004081B200000400004024
-:105E900081B200000400004081B200000400004014
-:105EA00081B200000400004081B200000400004004
-:105EB00081B200000400004081B2000004000040F4
-:105EC00081B200000400004081B2000004000040E4
-:105ED00081B200000400004081B2000004000040D4
-:105EE00081B200000400004081B2000004000040C4
-:105EF00081B200000400004081B2000004000040B4
-:105F000081B200000400004081B2000004000040A3
-:105F100081B200000400004081B200000400004093
-:105F200081B200000400004081B200000400004083
-:105F300081B200000400004081B200000400004073
-:105F400081B200000400004081B200000400004063
-:105F500081B200000400004081B200000400004053
-:105F600081B200000400004081B200000400004043
-:105F700081B200000400004081B200000400004033
-:105F800081B200000400004081B200000400004023
-:105F900081B200000400004081B200000400004013
-:105FA00081B200000400004081B200000400004003
-:105FB00081B200000400004081B2000004000040F3
-:105FC00081B200000400004081B2000004000040E3
-:105FD00081B200000400004081B2000004000040D3
-:105FE00081B200000400004081B2000004000040C3
-:105FF00081B200000400004081B2000004000040B3
-:1060000081B200000400004081B2000004000040A2
-:1060100081B200000400004081B200000400004092
-:1060200081B200000400004081B200000400004082
-:1060300081B200000400004081B200000400004072
-:1060400081B200000400004081B200000400004062
-:1060500081B200000400004081B200000400004052
-:1060600081B200000400004081B200000400004042
-:1060700081B200000400004081B200000400004032
-:1060800081B200000400004081B200000400004022
-:1060900081B200000400004081B200000400004012
-:1060A00081B200000400004081B200000400004002
-:1060B00081B200000400004081B2000004000040F2
-:1060C00081B200000400004081B2000004000040E2
-:1060D00081B200000400004081B2000004000040D2
-:1060E00081B200000400004081B2000004000040C2
-:1060F00081B200000400004081B2000004000040B2
-:1061000081B200000400004081B2000004000040A1
-:1061100081B200000400004081B200000400004091
-:1061200081B200000400004081B200000400004081
-:1061300081B200000400004081B200000400004071
-:1061400081B200000400004081B200000400004061
-:1061500081B200000400004081B200000400004051
-:1061600081B200000400004081B200000400004041
-:1061700081B200000400004081B200000400004031
-:1061800081B200000400004081B200000400004021
-:1061900081B200000400004081B200000400004011
-:1061A00081B200000400004081B200000400004001
-:1061B00081B200000400004081B2000004000040F1
-:1061C00081B200000400004081B2000004000040E1
-:1061D00081B200000400004081B2000004000040D1
-:1061E00081B200000400004081B2000004000040C1
-:1061F00081B200000400004081B2000004000040B1
-:1062000081B200000400004081B2000004000040A0
-:1062100081B200000400004081B200000400004090
-:1062200081B200000400004081B200000400004080
-:1062300081B200000400004081B200000400004070
-:1062400081B200000400004081B200000400004060
-:1062500081B200000400004081B200000400004050
-:1062600081B200000400004081B200000400004040
-:1062700081B200000400004081B200000400004030
-:1062800081B200000400004081B200000400004020
-:1062900081B200000400004081B200000400004010
-:1062A00081B200000400004081B200000400004000
-:1062B00081B200000400004081B2000004000040F0
-:1062C00081B200000400004081B2000004000040E0
-:1062D00081B200000400004081B2000004000040D0
-:1062E00081B200000400004081B2000004000040C0
-:1062F00081B200000400004081B2000004000040B0
-:1063000081B200000400004081B20000040000409F
-:1063100081B200000400004081B20000040000408F
-:1063200081B200000400004081B20000040000407F
-:1063300081B200000400004081B20000040000406F
-:1063400081B200000400004081B20000040000405F
-:1063500081B200000400004081B20000040000404F
-:1063600081B200000400004081B20000040000403F
-:1063700081B200000400004081B20000040000402F
-:1063800081B200000400004081B20000040000401F
-:1063900081B200000400004081B20000040000400F
-:1063A00081B200000400004081B2000004000040FF
-:1063B00081B200000400004081B2000004000040EF
-:1063C00081B200000400004081B2000004000040DF
-:1063D00081B200000400004081B2000004000040CF
-:1063E00081B200000400004081B2000004000040BF
-:1063F00081B200000400004081B2000004000040AF
-:1064000081B200000400004081B20000040000409E
-:1064100081B200000400004081B20000040000408E
-:1064200081B200000400004081B20000040000407E
-:1064300081B200000400004081B20000040000406E
-:1064400081B200000400004081B20000040000405E
-:1064500081B200000400004081B20000040000404E
-:1064600081B200000400004081B20000040000403E
-:1064700081B200000400004081B20000040000402E
-:1064800081B200000400004081B20000040000401E
-:1064900081B200000400004081B20000040000400E
-:1064A00081B200000400004081B2000004000040FE
-:1064B00081B200000400004081B2000004000040EE
-:1064C00081B200000400004081B2000004000040DE
-:1064D00081B200000400004081B2000004000040CE
-:1064E00081B200000400004081B2000004000040BE
-:1064F00081B200000400004081B2000004000040AE
-:1065000081B200000400004081B20000040000409D
-:1065100081B200000400004081B20000040000408D
-:1065200081B200000400004081B20000040000407D
-:1065300081B200000400004081B20000040000406D
-:1065400081B200000400004081B20000040000405D
-:1065500081B200000400004081B20000040000404D
-:1065600081B200000400004081B20000040000403D
-:1065700081B200000400004081B20000040000402D
-:1065800081B200000400004081B20000040000401D
-:1065900081B200000400004081B20000040000400D
-:1065A00081B200000400004081B2000004000040FD
-:1065B00081B200000400004081B2000004000040ED
-:1065C00081B200000400004081B2000004000040DD
-:1065D00081B200000400004081B2000004000040CD
-:1065E00081B200000400004081B2000004000040BD
-:1065F00081B200000400004081B2000004000040AD
-:1066000081B200000400004081B20000040000409C
-:1066100081B200000400004081B20000040000408C
-:1066200081B200000400004081B20000040000407C
-:1066300081B200000400004081B20000040000406C
-:1066400081B200000400004081B20000040000405C
-:1066500081B200000400004081B20000040000404C
-:1066600081B200000400004081B20000040000403C
-:1066700081B200000400004081B20000040000402C
-:1066800081B200000400004081B20000040000401C
-:1066900081B200000400004081B20000040000400C
-:1066A00081B200000400004081B2000004000040FC
-:1066B00081B200000400004081B2000004000040EC
-:1066C00081B200000400004081B2000004000040DC
-:1066D00081B200000400004081B2000004000040CC
-:1066E00081B200000400004081B2000004000040BC
-:1066F00081B200000400004081B2000004000040AC
-:1067000081B200000400004081B20000040000409B
-:1067100081B200000400004081B20000040000408B
-:1067200081B200000400004081B20000040000407B
-:1067300081B200000400004081B20000040000406B
-:1067400081B200000400004081B20000040000405B
-:1067500081B200000400004081B20000040000404B
-:1067600081B200000400004081B20000040000403B
-:1067700081B200000400004081B20000040000402B
-:1067800081B200000400004081B20000040000401B
-:1067900081B200000400004081B20000040000400B
-:1067A00081B200000400004081B2000004000040FB
-:1067B00081B200000400004081B2000004000040EB
-:1067C00081B200000400004081B2000004000040DB
-:1067D00081B200000400004081B2000004000040CB
-:1067E00081B200000400004081B2000004000040BB
-:1067F00081B200000400004081B2000004000040AB
-:1068000081B200000400004081B20000040000409A
-:1068100081B200000400004081B20000040000408A
-:1068200081B200000400004081B20000040000407A
-:1068300081B200000400004081B20000040000406A
-:1068400081B200000400004081B20000040000405A
-:1068500081B200000400004081B20000040000404A
-:1068600081B200000400004081B20000040000403A
-:1068700081B200000400004081B20000040000402A
-:1068800081B200000400004081B20000040000401A
-:1068900081B200000400004081B20000040000400A
-:1068A00081B200000400004081B2000004000040FA
-:1068B00081B200000400004081B2000004000040EA
-:1068C00081B200000400004081B2000004000040DA
-:1068D00081B200000400004081B2000004000040CA
-:1068E00081B200000400004081B2000004000040BA
-:1068F00081B200000400004081B2000004000040AA
-:1069000081B200000400004081B200000400004099
-:1069100081B200000400004081B200000400004089
-:1069200081B200000400004081B200000400004079
-:1069300081B200000400004081B200000400004069
-:1069400081B200000400004081B200000400004059
-:1069500081B200000400004081B200000400004049
-:1069600081B200000400004081B200000400004039
-:1069700081B200000400004081B200000400004029
-:1069800081B200000400004081B200000400004019
-:1069900081B200000400004081B200000400004009
-:1069A00081B200000400004081B2000004000040F9
-:1069B00081B200000400004081B2000004000040E9
-:1069C00081B200000400004081B2000004000040D9
-:1069D00081B200000400004081B2000004000040C9
-:1069E00081B200000400004081B2000004000040B9
-:1069F00081B200000400004081B2000004000040A9
-:106A000081B200000400004081B200000400004098
-:106A100081B200000400004081B200000400004088
-:106A200081B200000400004081B200000400004078
-:106A300081B200000400004081B200000400004068
-:106A400081B200000400004081B200000400004058
-:106A500081B200000400004081B200000400004048
-:106A600081B200000400004081B200000400004038
-:106A700081B200000400004081B200000400004028
-:106A800081B200000400004081B200000400004018
-:106A900081B200000400004081B200000400004008
-:106AA00081B200000400004081B2000004000040F8
-:106AB00081B200000400004081B2000004000040E8
-:106AC00081B200000400004081B2000004000040D8
-:106AD00081B200000400004081B2000004000040C8
-:106AE00081B200000400004081B2000004000040B8
-:106AF00081B200000400004081B2000004000040A8
-:106B000081B200000400004081B200000400004097
-:106B100081B200000400004081B200000400004087
-:106B200081B200000400004081B200000400004077
-:106B300081B200000400004081B200000400004067
-:106B400081B200000400004081B200000400004057
-:106B500081B200000400004081B200000400004047
-:106B600081B200000400004081B200000400004037
-:106B700081B200000400004081B200000400004027
-:106B800081B200000400004081B200000400004017
-:106B900081B200000400004081B200000400004007
-:106BA00081B200000400004081B2000004000040F7
-:106BB00081B200000400004081B2000004000040E7
-:106BC00081B200000400004081B2000004000040D7
-:106BD00081B200000400004081B2000004000040C7
-:106BE00081B200000400004081B2000004000040B7
-:106BF00081B200000400004081B2000004000040A7
-:106C000081B200000400004081B200000400004096
-:106C100081B200000400004081B200000400004086
-:106C200081B200000400004081B200000400004076
-:106C300081B200000400004081B200000400004066
-:106C400081B200000400004081B200000400004056
-:106C500081B200000400004081B200000400004046
-:106C600081B200000400004081B200000400004036
-:106C700081B200000400004081B200000400004026
-:106C800081B200000400004081B200000400004016
-:106C900081B200000400004081B200000400004006
-:106CA00081B200000400004081B2000004000040F6
-:106CB00081B200000400004081B2000004000040E6
-:106CC00081B200000400004081B2000004000040D6
-:106CD00081B200000400004081B2000004000040C6
-:106CE00081B200000400004081B2000004000040B6
-:106CF00081B200000400004081B2000004000040A6
-:106D000081B200000400004081B200000400004095
-:106D100081B200000400004081B200000400004085
-:106D200081B200000400004081B200000400004075
-:106D300081B200000400004081B200000400004065
-:106D400081B200000400004081B200000400004055
-:106D500081B200000400004081B200000400004045
-:106D600081B200000400004081B200000400004035
-:106D700081B200000400004081B200000400004025
-:106D800081B200000400004081B200000400004015
-:106D900081B200000400004081B200000400004005
-:106DA00081B200000400004081B2000004000040F5
-:106DB00081B200000400004081B2000004000040E5
-:106DC00081B200000400004081B2000004000040D5
-:106DD00081B200000400004081B2000004000040C5
-:106DE00081B200000400004081B2000004000040B5
-:106DF00081B200000400004081B2000004000040A5
-:106E000081B200000400004081B200000400004094
-:106E100081B200000400004081B200000400004084
-:106E200081B200000400004081B200000400004074
-:106E300081B200000400004081B200000400004064
-:106E400081B200000400004081B200000400004054
-:106E500081B200000400004081B200000400004044
-:106E600081B200000400004081B200000400004034
-:106E700081B200000400004081B200000400004024
-:106E800081B200000400004081B200000400004014
-:106E900081B200000400004081B200000400004004
-:106EA00081B200000400004081B2000004000040F4
-:106EB00081B200000400004081B2000004000040E4
-:106EC00081B200000400004081B2000004000040D4
-:106ED00081B200000400004081B2000004000040C4
-:106EE00081B200000400004081B2000004000040B4
-:106EF00081B200000400004081B2000004000040A4
-:106F000081B200000400004081B200000400004093
-:106F100081B200000400004081B200000400004083
-:106F200081B200000400004081B200000400004073
-:106F300081B200000400004081B200000400004063
-:106F400081B200000400004081B200000400004053
-:106F500081B200000400004081B200000400004043
-:106F600081B200000400004081B200000400004033
-:106F700081B200000400004081B200000400004023
-:106F800081B200000400004081B200000400004013
-:106F900081B200000400004081B200000400004003
-:106FA00081B200000400004081B2000004000040F3
-:106FB00081B200000400004081B2000004000040E3
-:106FC00081B200000400004081B2000004000040D3
-:106FD00081B200000400004081B2000004000040C3
-:106FE00081B200000400004081B2000004000040B3
-:106FF00081B200000400004081B2000004000040A3
-:1070000081B200000400004081B200000400004092
-:1070100081B200000400004081B200000400004082
-:1070200081B200000400004081B200000400004072
-:1070300081B200000400004081B200000400004062
-:1070400081B200000400004081B200000400004052
-:1070500081B200000400004081B200000400004042
-:1070600081B200000400004081B200000400004032
-:1070700081B200000400004081B200000400004022
-:1070800081B200000400004081B200000400004012
-:1070900081B200000400004081B200000400004002
-:1070A00081B200000400004081B2000004000040F2
-:1070B00081B200000400004081B2000004000040E2
-:1070C00081B200000400004081B2000004000040D2
-:1070D00081B200000400004081B2000004000040C2
-:1070E00081B200000400004081B2000004000040B2
-:1070F00081B200000400004081B2000004000040A2
-:1071000081B200000400004081B200000400004091
-:1071100081B200000400004081B200000400004081
-:1071200081B200000400004081B200000400004071
-:1071300081B200000400004081B200000400004061
-:1071400081B200000400004081B200000400004051
-:1071500081B200000400004081B200000400004041
-:1071600081B200000400004081B200000400004031
-:1071700081B200000400004081B200000400004021
-:1071800081B200000400004081B200000400004011
-:1071900081B200000400004081B200000400004001
-:1071A00081B200000400004081B2000004000040F1
-:1071B00081B200000400004081B2000004000040E1
-:1071C00081B200000400004081B2000004000040D1
-:1071D00081B200000400004081B2000004000040C1
-:1071E00081B200000400004081B2000004000040B1
-:1071F00081B200000400004081B2000004000040A1
-:1072000081B200000400004081B200000400004090
-:1072100081B200000400004081B200000400004080
-:1072200081B200000400004081B200000400004070
-:1072300081B200000400004081B200000400004060
-:1072400081B200000400004081B200000400004050
-:1072500081B200000400004081B200000400004040
-:1072600081B200000400004081B200000400004030
-:1072700081B200000400004081B200000400004020
-:1072800081B200000400004081B200000400004010
-:1072900081B200000400004081B200000400004000
-:1072A00081B200000400004081B2000004000040F0
-:1072B00081B200000400004081B2000004000040E0
-:1072C00081B200000400004081B2000004000040D0
-:1072D00081B200000400004081B2000004000040C0
-:1072E00081B200000400004081B2000004000040B0
-:1072F00081B200000400004081B2000004000040A0
-:1073000081B200000400004081B20000040000408F
-:1073100081B200000400004081B20000040000407F
-:1073200081B200000400004081B20000040000406F
-:1073300081B200000400004081B20000040000405F
-:1073400081B200000400004081B20000040000404F
-:1073500081B200000400004081B20000040000403F
-:1073600081B200000400004081B20000040000402F
-:1073700081B200000400004081B20000040000401F
-:1073800081B200000400004081B20000040000400F
-:1073900081B200000400004081B2000004000040FF
-:1073A00081B200000400004081B2000004000040EF
-:1073B00081B200000400004081B2000004000040DF
-:1073C00081B200000400004081B2000004000040CF
-:1073D00081B200000400004081B2000004000040BF
-:1073E00081B200000400004081B2000004000040AF
-:1073F00081B200000400004081B20000040000409F
-:1074000081B200000400004081B20000040000408E
-:1074100081B200000400004081B20000040000407E
-:1074200081B200000400004081B20000040000406E
-:1074300081B200000400004081B20000040000405E
-:1074400081B200000400004081B20000040000404E
-:1074500081B200000400004081B20000040000403E
-:1074600081B200000400004081B20000040000402E
-:1074700081B200000400004081B20000040000401E
-:1074800081B200000400004081B20000040000400E
-:1074900081B200000400004081B2000004000040FE
-:1074A00081B200000400004081B2000004000040EE
-:1074B00081B200000400004081B2000004000040DE
-:1074C00081B200000400004081B2000004000040CE
-:1074D00081B200000400004081B2000004000040BE
-:1074E00081B200000400004081B2000004000040AE
-:1074F00081B200000400004081B20000040000409E
-:1075000081B200000400004081B20000040000408D
-:1075100081B200000400004081B20000040000407D
-:1075200081B200000400004081B20000040000406D
-:1075300081B200000400004081B20000040000405D
-:1075400081B200000400004081B20000040000404D
-:1075500081B200000400004081B20000040000403D
-:1075600081B200000400004081B20000040000402D
-:1075700081B200000400004081B20000040000401D
-:1075800081B200000400004081B20000040000400D
-:1075900081B200000400004081B2000004000040FD
-:1075A00081B200000400004081B2000004000040ED
-:1075B00081B200000400004081B2000004000040DD
-:1075C00081B200000400004081B2000004000040CD
-:1075D00081B200000400004081B2000004000040BD
-:1075E00081B200000400004081B2000004000040AD
-:1075F00081B200000400004081B20000040000409D
-:1076000081B200000400004081B20000040000408C
-:1076100081B200000400004081B20000040000407C
-:1076200081B200000400004081B20000040000406C
-:1076300081B200000400004081B20000040000405C
-:1076400081B200000400004081B20000040000404C
-:1076500081B200000400004081B20000040000403C
-:1076600081B200000400004081B20000040000402C
-:1076700081B200000400004081B20000040000401C
-:1076800081B200000400004081B20000040000400C
-:1076900081B200000400004081B2000004000040FC
-:1076A00081B200000400004081B2000004000040EC
-:1076B00081B200000400004081B2000004000040DC
-:1076C00081B200000400004081B2000004000040CC
-:1076D00081B200000400004081B2000004000040BC
-:1076E00081B200000400004081B2000004000040AC
-:1076F00081B200000400004081B20000040000409C
-:1077000081B200000400004081B20000040000408B
-:1077100081B200000400004081B20000040000407B
-:1077200081B200000400004081B20000040000406B
-:1077300081B200000400004081B20000040000405B
-:1077400081B200000400004081B20000040000404B
-:1077500081B200000400004081B20000040000403B
-:1077600081B200000400004081B20000040000402B
-:1077700081B200000400004081B20000040000401B
-:1077800081B200000400004081B20000040000400B
-:1077900081B200000400004081B2000004000040FB
-:1077A00081B200000400004081B2000004000040EB
-:1077B00081B200000400004081B2000004000040DB
-:1077C00081B200000400004081B2000004000040CB
-:1077D00081B200000400004081B2000004000040BB
-:1077E00081B200000400004081B2000004000040AB
-:1077F00081B200000400004081B20000040000409B
-:1078000081B200000400004081B20000040000408A
-:1078100081B200000400004081B20000040000407A
-:1078200081B200000400004081B20000040000406A
-:1078300081B200000400004081B20000040000405A
-:1078400081B200000400004081B20000040000404A
-:1078500081B200000400004081B20000040000403A
-:1078600081B200000400004081B20000040000402A
-:1078700081B200000400004081B20000040000401A
-:1078800081B200000400004081B20000040000400A
-:1078900081B200000400004081B2000004000040FA
-:1078A00081B200000400004081B2000004000040EA
-:1078B00081B200000400004081B2000004000040DA
-:1078C00081B200000400004081B2000004000040CA
-:1078D00081B200000400004081B2000004000040BA
-:1078E00081B200000400004081B2000004000040AA
-:1078F00081B200000400004081B20000040000409A
-:1079000081B200000400004081B200000400004089
-:1079100081B200000400004081B200000400004079
-:1079200081B200000400004081B200000400004069
-:1079300081B200000400004081B200000400004059
-:1079400081B200000400004081B200000400004049
-:1079500081B200000400004081B200000400004039
-:1079600081B200000400004081B200000400004029
-:1079700081B200000400004081B200000400004019
-:1079800081B200000400004081B200000400004009
-:1079900081B200000400004081B2000004000040F9
-:1079A00081B200000400004081B2000004000040E9
-:1079B00081B200000400004081B2000004000040D9
-:1079C00081B200000400004081B2000004000040C9
-:1079D00081B200000400004081B2000004000040B9
-:1079E00081B200000400004081B2000004000040A9
-:1079F00081B200000400004081B200000400004099
-:107A000081B200000400004081B200000400004088
-:107A100081B200000400004081B200000400004078
-:107A200081B200000400004081B200000400004068
-:107A300081B200000400004081B200000400004058
-:107A400081B200000400004081B200000400004048
-:107A500081B200000400004081B200000400004038
-:107A600081B200000400004081B200000400004028
-:107A700081B200000400004081B200000400004018
-:107A800081B200000400004081B200000400004008
-:107A900081B200000400004081B2000004000040F8
-:107AA00081B200000400004081B2000004000040E8
-:107AB00081B200000400004081B2000004000040D8
-:107AC00081B200000400004081B2000004000040C8
-:107AD00081B200000400004081B2000004000040B8
-:107AE00081B200000400004081B2000004000040A8
-:107AF00081B200000400004081B200000400004098
-:107B000081B200000400004081B200000400004087
-:107B100081B200000400004081B200000400004077
-:107B200081B200000400004081B200000400004067
-:107B300081B200000400004081B200000400004057
-:107B400081B200000400004081B200000400004047
-:107B500081B200000400004081B200000400004037
-:107B600081B200000400004081B200000400004027
-:107B700081B200000400004081B200000400004017
-:107B800081B200000400004081B200000400004007
-:107B900081B200000400004081B2000004000040F7
-:107BA00081B200000400004081B2000004000040E7
-:107BB00081B200000400004081B2000004000040D7
-:107BC00081B200000400004081B2000004000040C7
-:107BD00081B200000400004081B2000004000040B7
-:107BE00081B200000400004081B2000004000040A7
-:107BF00081B200000400004081B200000400004097
-:107C000081B200000400004081B200000400004086
-:107C100081B200000400004081B200000400004076
-:107C200081B200000400004081B200000400004066
-:107C300081B200000400004081B200000400004056
-:107C400081B200000400004081B200000400004046
-:107C500081B200000400004081B200000400004036
-:107C600081B200000400004081B200000400004026
-:107C700081B200000400004081B200000400004016
-:107C800081B200000400004081B200000400004006
-:107C900081B200000400004081B2000004000040F6
-:107CA00081B200000400004081B2000004000040E6
-:107CB00081B200000400004081B2000004000040D6
-:107CC00081B200000400004081B2000004000040C6
-:107CD00081B200000400004081B2000004000040B6
-:107CE00081B200000400004081B2000004000040A6
-:107CF00081B200000400004081B200000400004096
-:107D000081B200000400004081B200000400004085
-:107D100081B200000400004081B200000400004075
-:107D200081B200000400004081B200000400004065
-:107D300081B200000400004081B200000400004055
-:107D400081B200000400004081B200000400004045
-:107D500081B200000400004081B200000400004035
-:107D600081B200000400004081B200000400004025
-:107D700081B200000400004081B200000400004015
-:107D800081B200000400004081B200000400004005
-:107D900081B20000B69F00889AB00000B69F0088AC
-:107DA0009AB00000B69F00889AB00000B69F008885
-:107DB0009AB00000B69F00889AB0000000000088CA
-:107DC0009AB00100B69F414081320000B99F224025
-:107DD0007B6F0000B69F194081B20000000019417E
-:107DE0007BB30100000000A4C4B30100000000A1A7
-:107DF000C6B3010000002FA2C8B301000814004060
-:107E000049990100B09F004D9ACC0100C29F2640C5
-:107E1000813200000000004C49C10100C09FA24116
-:107E20009B500000C69F80808032000000005249B5
-:107E3000FD9301000000004AFD930100C99F00422C
-:107E4000CD9300000000514AFD930100000000495D
-:107E5000FD930100C99F0043CB93000000005040F8
-:107E600081B20100D99F004019990100000000F083
-:107E70009AB001000000004449D10100000040F028
-:107E800080B201000000414D80B20100D19F00404E
-:107E90001999010000004C4081B20100000000442B
-:107EA00049D10100000000F09AB001000000004D2F
-:107EB00010B10000000000E249B10100000000E341
-:107EC00043B10100000000E445B1010000000040A2
-:107ED0007BB301000000484F40B10100D99F004032
-:107EE00081B200000400004081B2000004000040A4
-:107EF00081B200000400004081B200000400004094
-:107F000081B200000400004081B200000400004083
-:107F100081B200000000804081B0010004000040F8
-:107F200081B200000400004081B200000400004063
-:107F300081B200000400004081B200000400004053
-:107F400081B200000400004081B200000400004043
-:107F500081B200000400004081B200000400004033
-:107F600081B200000400004081B200000400004023
-:107F700081B200000400004081B200000400004013
-:107F800081B200000400004081B200000400004003
-:107F900081B200006A84004081B20000319A004042
-:107FA00081B200000400004081B200004D9A004000
-:107FB00081B200000400004081B200000000804057
-:107FC00081B20100000000A810B1000004000040D0
-:107FD00081B200000400004081B2000004000040B3
-:107FE00081B200000400004081B2000004000040A3
-:107FF00081B200000400004081B200000400004093
-:1080000081B200000400004081B200000400004082
-:0480100081B2000039
-:00000001FF
+++ /dev/null
-:10000000000200004775010004A01301001CB75B4B
-:10001000093000B65F01001C00000020183B783A50
-:10002000001CA27701001C071D017018AD7BF1FFB9
-:100030001CB37BA9AA1EB47B010C1CB57B29061C32
-:1000400000005064080C315A70040C315A80040CC2
-:10005000314E90040C314AA000092555C0040C31E2
-:1000600052B000E92455C004CCB3001C1CEB2D0198
-:10007000001C065652D408079D00001C7BB70200E6
-:1000800010A00F51540906565EC004A0307403003E
-:10009000AC30750300CD033A001C7BB702001C6036
-:1000A0008E5154092925750300808E5154098C30D6
-:1000B000910004471C01001CA00F5154090000646A
-:1000C0000004471C65C004471C7503006C30010028
-:1000D0001C4D3402001C7BB702001CA00F515409B8
-:1000E000C88337001C800100001C0000640004A0CD
-:1000F0000F505409000074C3047BFBF2001CCC3386
-:100100000D001CB47BFD031C800E505409E0FB0560
-:10011000001C0000AC0300B30F5154090000EC7048
-:10012000040000EC80040000AC93006176ADC304D1
-:10013000C08D515409E07B00C01FA0FDC50100CC5B
-:100140003305001CD403003C1CD4D31B001CC0D3BB
-:1001500052001C00007C13048E8E5254095B807E7A
-:100160001304000000001C0000940100A00F515473
-:1001700009A00F515409C003FC7F1CA001A001007D
-:100180000000A40100A00F515409C003FC031CF59A
-:100190007701001C267A02061CA00F515409B30FE8
-:1001A000515409B50202001CA00F5154097A7E0275
-:1001B000001CB50202001C530F525409AF0301008A
-:1001C0001C7A0E525409B50202001C000002001CE9
-:1001D000A03DAA11040000AC1104D4D352001CB5F8
-:1001E0003EB2010020FBFDFF1F802C8C0300B93ABA
-:1001F0009E0100753B02001CA71C010010DB83164A
-:10020000001CC71D21C104B93B8DC1048B2C01000A
-:100210001C6B2C35C1040000781100CB2C79C10473
-:10022000A00F515409A00F51540954D002001C4989
-:1002300025B10100AB2C81C104A71D750300CC338F
-:1002400009001CEB2D01001CEA2901001CA00F5124
-:100250005409AE0F515409A00F515409D407FC039F
-:100260001C993A02001CBB3802001C003800001C1C
-:100270000000FC0104DB3B7E001CC71D01001C26A6
-:100280007A16061C271D01001CB30F5154097A0E63
-:10029000525409530F5254097A0E525409530F52B3
-:1002A00054097A0E525409530F525409A00F515455
-:1002B000097A0602001C530F525409AF0301001CB7
-:1002C0007A0E525409530F5254097A0E525409535C
-:1002D0000F5254097A0E525409530F5254097A0E90
-:1002E000525409003D02001C0000581200CB2C01A2
-:1002F000001C753B02001CA71C010010A67BFD051D
-:100300001C000090C204A67BFD051C0000A8C204CE
-:10031000CB2F05001C602C00001CC71CE90200A0AC
-:100320000F515409530702001CC083F1321C000016
-:10033000600204467AE6051C7A0E525409C083F125
-:10034000321C000068020440FA15001C0000A802DC
-:1003500004467AE6051CA00F515409A00F51540918
-:10036000A00F515409A00F515409B37B01C01F7451
-:100370000E505409C0039C001C8000F802000000CD
-:10038000F802040000CC1205071D01001CD4D32B79
-:10039000001CD4D352001C80769D1304000000037F
-:1003A00000A67BB50310C79C00001C802C00001C1D
-:1003B00000007C0204000074C304AB2DF912050791
-:1003C0001DD5C2048B2D01001C692501001CA67BD4
-:1003D000B50310CB2F09001C602C00001C00006826
-:1003E0000300530F525409467AE6051C7A0E525404
-:1003F0000940FA15001C0000300304467AE6051C8B
-:10040000B50F515409A00F51540973EC4A0304600D
-:100410002C00001C0000480300C71C01001C000049
-:10042000481305071D01001CC0D722001C75569EED
-:100430001304602C00001CE71C650304E79C00000B
-:100440001CA67BB50310802C00001C0000180304C0
-:10045000000074C304B97B01001C0000ACC304CBD2
-:10046000AFFC071CCB2F01041CC79F80031C00009E
-:10047000ACC304CBAFFC071CCB2F0D041CC79F8063
-:10048000031C0000ACC304CBAF00F81DCB2F010050
-:100490001DA67BB5031CC79CACC3040000AC1305B0
-:1004A000071D01001CC01DFCD308279D040400A0EB
-:1004B000EE66D400FB75291404207B06001CC01CCA
-:1004C0003C04000000D0D308000020F400C0EFF28C
-:1004D000001C20257C140460B7F2030000002C15DA
-:1004E00000CCB3FC031CCC3305021C00002CC5045B
-:1004F00060B72E050400002C150400007CC404C065
-:100500001DB8F304000088C404079D00001C1B7480
-:100510001DF404A67B11041CA00F895409E07B0084
-:10052000FC1F397F02001C071DBDC304A67BCD0341
-:100530001C000088C404E01C00001C0000C403046C
-:10054000CBAF00F81DCB2F01101D0000CCC3040061
-:1005500000CC0304CBAF00F81DCB2F01181DC79FA3
-:10056000000B1C0000CCC304FB7501001C071D011F
-:10057000001CCCB3FC031CCC3301021C0000CCC318
-:1005800004A01C00001CA0EEC20304CBAFFC071C9F
-:10059000CB2F09041CFB7501001C0000CCC304CC4C
-:1005A000B3FC031CCC3301021C00002CC50400006A
-:1005B000983405CCB3FC031CCC3315021C479D7446
-:1005C000C4040000984400801D9C5404871DAD04A1
-:1005D00000CE7601001CEF76BDC404A477AD2409DB
-:1005E000E47601001CC47601001C0000B85404D756
-:1005F00076015018F67601001C000000301800004B
-:10060000000010CC3061C504EB2D01001CEA29016B
-:10061000001CC05901001CF57749C504E030FC04FA
-:1006200000004CD00400204C140500000008050018
-:10063000CCB3FC031CCC3309021CEB2DD5C404CC79
-:10064000B3FC031CCC3319021CEB2DD5C404CCB372
-:10065000FC031CCC330D021CEB2DD5C404CCB3FC25
-:10066000031CCC3311021CEB2DD5C404007B00808D
-:100670001CAE77610500000004C004D38B00FC1F92
-:10068000607A3C001C604CE00400C02F20051FE095
-:1006900030D004008025D00400B55BD10404692665
-:1006A00001001C6A2B01001C801D00001CA9256193
-:1006B0000500EE3000001CAF77210500B45F01405B
-:1006C00018079D645504B77601001C967601001C3E
-:1006D000471D01001CA433016018A42F0160186499
-:1006E000770160182477016018447701001C648842
-:1006F00003001CA43F01001CA43B01001C537B0011
-:10070000C01CD3CF1B001C534F02001CDACF00C00B
-:100710001FD5570F001CD3D337001CD4530F001C18
-:10072000E02900001CF5D5CC05000000B855047781
-:100730005601001C565301001C0000001018000058
-:1007400004C004F55501001C0000D0550477560183
-:10075000001C565301001C0000001018000004C0CB
-:1007600004CB2F011810CB2F011010CB2F01081034
-:10077000CB2F010810CB2F012010CB2F010010CB65
-:100780002F012810892571C20400000CC304000049
-:1007900074C304000074C304000074C30400007038
-:1007A000C20400000CC304000074C304000074C33E
-:1007B00004000074C304401C6CC004401C9CC004B2
-:1007C000A77775C3040000C4C004271DF1C004004E
-:1007D0000074C304000074C304000074C304000068
-:1007E00048C604000048C604000048C6040000488B
-:1007F000C604000048C604000048C604000048C6FD
-:1008000004000048C604000048C604000048C604AE
-:10081000000048C604000048C604000048C60400A2
-:100820000048C604000048C604000048C604000092
-:1008300048C604000048C604000048C6040000483A
-:10084000C604000048C604000048C604000048C6AC
-:1008500004000048C604000048C604000048C6045E
-:10086000000048C604000048C604000048C6040052
-:100870000048C604000048C604000048C604000042
-:1008800048C604000048C604000048C604000048EA
-:10089000C604000048C604000048C604000048C65C
-:1008A00004000048C604000048C604000048C6040E
-:1008B000000048C604000048C604000048C6040002
-:1008C0000048C604000048C604000048C6040000F2
-:1008D00048C604000048C604000048C6040000489A
-:1008E000C604000048C604000048C604000048C60C
-:1008F00004000048C604000048C604000048C604BE
-:10090000000048C604000048C604000048C60400B1
-:100910000048C604000048C604000048C6040000A1
-:1009200048C604000048C604000048C60400004849
-:10093000C604000048C604000048C604000048C6BB
-:1009400004000048C604000048C604000048C6046D
-:10095000000048C604000048C604000048C6040061
-:100960000048C604000048C604000048C604000051
-:1009700048C604000048C604000048C604000048F9
-:10098000C604000048C604000048C604000048C66B
-:1009900004000048C604000048C604000048C6041D
-:1009A000000048C604000048C604000048C6040011
-:1009B0000048C604000048C604000048C604000001
-:1009C00048C604000048C604000048C604000048A9
-:1009D000C604000048C604000048C604000048C61B
-:1009E00004000048C604000048C604000048C604CD
-:1009F000000048C604000048C604000048C60400C1
-:040A00000048C604E0
-:00000001FF
+++ /dev/null
-:1000000002000000004000000000010000000000AD
-:10001000008000001500004081B200001B0000407D
-:1000200081B200002100004081B2000003000040C6
-:1000300081B20000000000A898B001000480A24036
-:10004000FD7F00000900A249DD7D00000000004C9A
-:1000500080B2010007000040D1B100000000004C58
-:1000600080B201000900A240757D000060000040E0
-:10007000619901000B00A8B17E3100000900004029
-:1000800081B2000000808F981831000010000098A5
-:1000900080E40100000041988094010000000040CD
-:1000A00081B201001000009880E401000E00409829
-:1000B000809400001100004081B200000000004068
-:1000C000A59901001900294081320000190014BCD3
-:1000D000803200000E0093BC8032000000005040CF
-:1000E00081B201000080004081B200001000004099
-:1000F000A59901001F002940813200001F0014BC97
-:1001000080320000120093BC80320000000050409A
-:1001100081B201000180004081B200002000004057
-:10012000A59901002500294081320000250014BC5A
-:1001300080320000140093BC8032000000000049AF
-:10014000DD810100120100408132010033010040D5
-:10015000813201002A0014BC80320000FE0013BC72
-:10016000803200005495004045990100FFFF004097
-:10017000E599010000002F4049B101000000004056
-:10018000E1B1010000000040FDB3010000000040AB
-:10019000FFB30100330018EE803200000000005071
-:1001A00089B001003200A24189500000990000404E
-:1001B000813201003094004043990100000000F8B2
-:1001C00020B10100000000FAE0B30100390098EE10
-:1001D00080320000000000FB80B001003B0080F393
-:1001E000DE33000000000047FD9301003E0083F372
-:1001F00080320000F00000F38088010001800040A0
-:100200002EDD0100009400404399010000000046EB
-:1002100043C10100000000FA24B101007C0018EE87
-:1002200080320000450095E880320000FFFF00E8C2
-:10023000808801007C0026408132000000000040E0
-:10024000D5990100000000F2ECB30100000000F8B5
-:10025000D6B1010008000040D5990100000000F06F
-:10026000D6B10100FF0000F8EE8B0100080100404C
-:10027000D5990100FF0000F0808C0100000000F71C
-:100280008194010000000040D6B10100FF0000F899
-:10029000808801003C000040D5990100FF0000F07B
-:1002A000D68D0100FFFF00F0F0DB010000000048E8
-:1002B00081E00100000000F8819401003C01004051
-:1002C000D599010000000040D6B10100FF0000F800
-:1002D000808801000000004881E00100000000F873
-:1002E000819401003C020040D599010000000040CB
-:1002F000D6B101002C000040D5990100000000F8A3
-:10030000D6B101001E0000F082F40100FF3F00F8AA
-:1003100080D80100640026408132000000000041C6
-:1003200081D00100FFFF004080D8010000000041A3
-:100330008094010000000040D8B10100680022FA5A
-:10034000803000000000004C81E00100010000400E
-:1003500080CC010000000040DEB10100000100403F
-:10036000D5990100100000FA80E40100000000F6B9
-:100370008194010000000040D6B10100000200405D
-:10038000D5990100100000FA80E40100000000F699
-:100390008194010000000040D6B101000600004039
-:1003A000D5990100100000FBD6E5010007000040D0
-:1003B000D5990100180000FBD6E501004800004077
-:1003C000D5990100100000FAD6E501005000004068
-:1003D000D5990100100000FBD6E50100030000FBE9
-:1003E0007A890100000000F0DCB101007C00004CC3
-:1003F000DD9100007C0095E88430000000002FE9CA
-:10040000FAB3010000000040D1B10100FF0000423A
-:10041000808801003400004080CE01007C00A640AE
-:1004200081320000850000408132010002802240BC
-:10043000803200007C00004081B200000000004FCC
-:1004400081B001008E0009F9813200008C0008F9AA
-:100450008132000098001FFDF93300008B009EFDE3
-:10046000813200000000004AF39301000000804840
-:10047000F3930100000000FDF7B301000000804984
-:10048000F3930100000000FC19B1010093000AF988
-:1004900081320000000040FB81B20100000041FDFC
-:1004A00081B20100000780F9F38F0100000742F9D3
-:1004B000F38F01009700A2FFF76F00000000434098
-:1004C00081B201000000A2FFFBEF0000000080FCF1
-:1004D000E1B101000000804081B0010000940040C3
-:1004E00047990100BB000040813201000000A24694
-:1004F000FD7F01000094004047990100CE000040BC
-:10050000813201000000A244FD7F01000094004000
-:100510004599010000000040F1B10100FF7F00405B
-:10052000F5990100FF7F0040F59901009A13004002
-:10053000F599010007000040F59901000100004015
-:10054000F599010000020040F59901000200004009
-:10055000F599010000020040F599010003010040F7
-:10056000F599010000000040F59901009A13004040
-:10057000F59901000B000040F59901008000004052
-:10058000F599010000000040F599010000000040CD
-:10059000F599010007000040F599010008000040AE
-:1005A000F5990100B0020040F599010000000040FB
-:1005B000F599010000000040F59901000229004072
-:1005C000F599010000000040F59901000067004026
-:1005D000F599010000000040F599010080000040FD
-:1005E000F599010000008040F599010000000045E8
-:1005F000FD83010000000046FD830100FF7F0040F5
-:1006000025990100C4000040813201000000A2448D
-:1006100080B2000000000045FD930100E2000040B0
-:10062000833001000000A2458032010000008046B6
-:10063000FD9301000010004083980100DD000040A0
-:100640002B3101000000A24688B0000000000041EC
-:1006500089B00100000000948CB00100FFFF00464B
-:1006600080880100A5A5A24080CE000000000048BF
-:100670008DF00100C90082418940000000008040E7
-:1006800089B0010000000044FD830100D400004057
-:10069000813201000000A24480B20000E2000008A4
-:1006A000833001000000A245803201000000804438
-:1006B000FD93010000300008839801008000004095
-:1006C0002B990100DB000040893001000000A246A8
-:1006D00080B20000FFFF009480880100A5A5A24021
-:1006E000804E01000000804389B001000384004176
-:1006F0002C990100DE00004081B200000388004117
-:100700002C990100000000208DB0010000009F9690
-:1007100080B20000DF00A2418D5000000000804048
-:1007200081B20100FF7F0040259901000000004CCC
-:1007300089E00100DD000044821401000000909473
-:100740008AB0000000000045F0B101001000004533
-:1007500088F401000000004489D00100DD0000445D
-:100760002B410100EC00084180320000ED000094B4
-:1007700024B100001000009424F501000000009452
-:10078000F0B10100F200A04489500000DD000044F7
-:100790002B41010000000094F0B10100EF00204463
-:1007A000895000001000004588F40100000000FAA4
-:1007B0008AB001000000A34289D00000F700A0FA2F
-:1007C0008A400000000000418BC00100F500A342F8
-:1007D00089500000FFFF0045888801001000004597
-:1007E0008AF40100FC0090448A40000000000041AF
-:1007F0008BC00100FFFF00458AA801000000805067
-:100800008BE00100FF7F0040259901007C00004043
-:100810002B9901000030004083980100DD000008A2
-:1008200083140100000000942AB101000080004000
-:10083000F99B0100DD0000FC19310100000040942B
-:1008400080B20100DD0000442B4101000000419412
-:1008500080B2010000000041F9C301000000004423
-:100860002BC1010004019F948032000002800040EF
-:1008700081B200001001005193B000001001004D42
-:1008800093B000001001004993B000000000004246
-:1008900093B001001001A24193500000000080407D
-:1008A00081B201000000104081B20100000011403F
-:1008B00081B201000000124081B20100000013402B
-:1008C00081B201000000144081B201000000154017
-:1008D00081B201000000164081B201000000174003
-:1008E00081B201000000184081B2010000001940EF
-:1008F00081B2010000001A4081B2010000001B40DB
-:1009000081B2010000001C4081B2010000001D40C6
-:1009100081B2010000001E4081B2010000001F40B2
-:1009200081B201000000704081B2010000007140FE
-:1009300081B201000000724081B2010000007340EA
-:1009400081B201000000744081B2010000007540D6
-:1009500081B201000000764081B2010000007740C2
-:1009600081B201000000784081B2010000007940AE
-:1009700081B2010000007A4081B2010000007B409A
-:1009800081B2010000007C4081B2010000007D4086
-:1009900081B2010000007E4081B2010000007F4072
-:1009A00081B201000000804081B2010000040040DB
-:1009B000A199010000000050A1D1010000000040F9
-:1009C0001BB001000000004019B001000000004011
-:1009D00017B001000000004015B001000000004009
-:1009E00013B001000000004011B001000000004001
-:1009F0000FB00100000000400DB0010000000040F9
-:100A00000BB001000000004009B0010000000040F0
-:100A100007B001000000004005B0010000000040E8
-:100A200003B001000000004001B001003B0120487C
-:100A3000A15100000000804081B201004701224B1B
-:100A4000747D00000000804081B201006000004B16
-:100A500060990100000000B17EB101004801A8408A
-:100A6000813200004501004081B200000500804055
-:100A700097980100180000AA9688010000008043A2
-:100A800097F00100070000AA96880100000080404E
-:100A900081B201000000005807900100D89F00407B
-:100AA00081B2000000000044A5B30100D80200405C
-:100AB00081320100F8020040813201000000005C38
-:100AC00007900100D89F0040BFB300005A0122CC1C
-:100AD000857F00000000005107900100D89F004072
-:100AE00081B200000000004049B10100AE0300CB1C
-:100AF000A3C90100D0140040A19B01000000002008
-:100B000046B1010000000048F1B10100000000D032
-:100B1000F1B10100000000CAF1B10100000000D5F0
-:100B2000E1B10100070000406199010020000020B0
-:100B300062DD01006301A84081320000000000CCAA
-:100B400085930100F802004081320100D01400407A
-:100B500043990100000000FABAB30100000000FA56
-:100B6000A4B30100000000F8BCB3010000142F4042
-:100B700081B00100000000E7A7B30100000000D829
-:100B8000A9B30100FF0000DD8188010002000040E0
-:100B900080F401007301004080C80100860100DD7F
-:100BA000813200000000004010B1000087010040C9
-:100BB00081B200008801004081B20000890100403C
-:100BC00081B200008A01004081B200008B01004028
-:100BD00081B200008D01004081B200008F01004011
-:100BE00081B200005001004081B20000B601004017
-:100BF00081B200005001004081B20000C4010040F9
-:100C000081B20000C501004081B2000082020040B4
-:100C100081B200008302004081B22800B802004087
-:100C200081B22800D49F004081B22800D59F0040A7
-:100C300081B22800D69F004081B22800D79F004093
-:100C400081B228007201004181C02800550151493C
-:100C5000FD9328005501524AFD932A00550155493C
-:100C6000FD832A005501564AFD832A0050019181D7
-:100C700080302A005501454081B22A0050019182FE
-:100C800080302A005501464081B22A000000004011
-:100C900089B02B0000002F4081B0010000140040FB
-:100CA00049990100B30122DEE16D00000000004C13
-:100CB00049C101000000004181C001009201A2442D
-:100CC000816C00000000004C49D101009A012240D3
-:100CD000E16D00009601A2418150000050010041E9
-:100CE000BFB3000000000042BFB301005001A00FDD
-:100CF000BD6F0000000000DEE1B101000000004413
-:100D000049C10100B50100401999010000004240AD
-:100D100081B20100000043FF85B00100000000DE49
-:100D200019B10100000042FF87B00100000043FF3D
-:100D3000E1B101000000004449C1010000002FFFA3
-:100D4000E1B10100081400A480CC0100AA012640F2
-:100D5000813200000000004185C00100A801A24CC2
-:100D600081500000B40122D281320000AF01224143
-:100D7000A56F00005001A2E081320000000000D207
-:100D8000C1B301000000005C8990010000004042F6
-:100D900080B201000000414380B20100000000F079
-:100DA0008894010055010044E0B10000B101004801
-:100DB00049C10000AF01005B89900000A89F00A01E
-:100DC0009EB000000000004083B00100001400400D
-:100DD000499901000000234081B00100BE0122DEDC
-:100DE000E16D00000000004C49C10100000000411D
-:100DF00081C00100B901A244816C00005001004390
-:100E0000BFB30000000000F818B10100000040F876
-:100E100080B20100000041F080B2010000000040FB
-:100E2000F1B1010000000040F1B1010055010040A6
-:100E3000E1B10000C601004091B000000000004197
-:100E400091B00100D0142E4049B1010005000040CE
-:100E5000A39B0100080000DD81F40100CB010040EC
-:100E600080C801000000004010B10000D101004026
-:100E700081B00000530100DEA1B30000E301004097
-:100E800081B20000E501004081B00000EB010040AC
-:100E900081B20000520100DFE1B10000000000D08B
-:100EA000BAB30100000000DEA1B10100020000D2CF
-:100EB000A5E70100000000D2C1B30100000000005E
-:100EC000F0B10100DB012244C1530000DA0184418A
-:100ED00081400000DE01004081320100000000D0AE
-:100EE00045B10100D5010041A1C10000DA02004076
-:100EF00081320100F802004081320100550100DD1D
-:100F0000A1B100000000004081B00100400000409D
-:100F1000A59B0100DA02004081320100400000D3AD
-:100F2000A7CB0100F80200E0A5B3000003000040D9
-:100F3000A39B0100530100DEA1B3000000000044A8
-:100F4000BFB30100000000DE819001005001A2BA91
-:100F500080040000600000DE61990100E801A8B192
-:100F60008030000052010040E0B10000000000D0DD
-:100F7000BAB301006B020040819801006002004D8D
-:100F80008330010000000044E1B301000000004490
-:100F9000E3B3010000000044E5B301000000004499
-:100FA000E9B3010000000044EBB30100000000447D
-:100FB000F5B3010000000044F7B301000000004455
-:100FC000F9B30100F90122408F6F00007802004060
-:100FD00081980100600200C7833001008002004058
-:100FE000819801006002004283300100000000E8A7
-:100FF000F1B10100000000E9F1B10100000000EAD8
-:10100000F1B10100000000EBF1B10100000000852A
-:10101000F0B10100000000ECF1B10100000000EDB2
-:10102000F1B10100000000B2F0B10100000000A920
-:10103000F0B10100000000ACF0B10100000000AB15
-:10104000F0B10100000000B8F0B10100000000B9EB
-:10105000F0B10100000000BAF0B10100000000BBD7
-:10106000F0B101000C02B8408130000000000040E7
-:10107000819001000E02B940813200000000004161
-:10108000819001001002BA4081320000000000424D
-:10109000819001001202BB40813200000000004339
-:1010A000819001001402BC40813200000000004425
-:1010B000819001001602BD40813200000000004511
-:1010C000819001001802BE408132000000000046FD
-:1010D000819001001A02BF408132000000000047E9
-:1010E000819001001C02C8408132000000000048CD
-:1010F000819001001E02C9408132000000000049B9
-:10110000819001002002CA40813200000000004AA4
-:10111000819001002202CB40813200000000004B90
-:10112000819001002402CC40813200000000004C7C
-:10113000819001002602CD40813200000000004D68
-:10114000819001002802CE40813200000000004E54
-:10115000819001002A02CF40813200000000004F40
-:10116000819001002C02F04081320000000000500C
-:10117000819001002E02F1408132000000000051F8
-:10118000819001003002F2408132000000000052E4
-:10119000819001003202F3408132000000000053D0
-:1011A000819001003402F4408132000000000054BC
-:1011B000819001003602F5408132000000000055A8
-:1011C000819001003802F640813200000000005694
-:1011D000819001003A02F740813200000000005780
-:1011E000819001003C02F84081320000000000586C
-:1011F000819001003E02F940813200000000005958
-:10120000819001004002FA40813200000000005A43
-:10121000819001004202FB40813200000000005B2F
-:10122000819001004402FC40813200000000005C1B
-:10123000819001004602FD40813200000000005D07
-:10124000819001004802FE40813200000000005EF3
-:10125000819001004A02FF40813200000000005FDF
-:101260008190010000000040F0B10100400000400A
-:10127000A59B0100D802004081320100F802004025
-:1012800081320100D0142E06A5B30100400000D326
-:10129000A7CB0100000000F0F1B10100000000F157
-:1012A000F1B10100000000F2F1B10100000000F412
-:1012B000F1B10100000000F5F1B10100000000FAF9
-:1012C000F1B10100000000FBF1B10100000000FCE1
-:1012D000F1B10100000000EBF1B10100000000EEEF
-:1012E000F1B10100000000EFF1B10100000000F3D6
-:1012F000F1B10100000000F6F1B10100000000FDB5
-:10130000F1B10100DB0100C7E1B100000000804045
-:1013100081B20100660200488032000000005140A6
-:101320001AB1010000004D4081B2010000004540AB
-:1013300081B201006302A241835000005F02494074
-:1013400081B20000000052401CB1010000004E407C
-:1013500081B201000000464081B201006802A24152
-:10136000835000005F024A4081B20000000000A0EC
-:101370009EB0010000000080D8B30100000000A171
-:10138000D0B30100000000A2D2B30100000000A40D
-:10139000D4B30100000000D0D6B30100000000D19A
-:1013A000DCB30100000000D2DEB3010000000088C1
-:1013B000DAB30100000000D48EB30100000000D3B6
-:1013C000E6B30100000000ACECB30100000000999E
-:1013D000FAB30100000000D5E0B30100000000D521
-:1013E000E2B30100000000D5E4B30100000000D525
-:1013F000E8B30100000000D5EAB30100000000D509
-:10140000F4B30100000000D5F6B30100000000D5E0
-:10141000F8B30100000000C7A9B101000000004FAF
-:1014200040B101008402004091B000000000004182
-:1014300091B0010007000040A39B0100080000DDFF
-:1014400081F401008802004080C8010000000040D3
-:1014500010B100008D02004081B2000098020040EF
-:1014600081B2000098020046A3B300009B02004036
-:1014700081B20000A102004081B200008F0223501F
-:10148000A56F000000000050A5B30100E802004273
-:10149000A5630100F802004081320100D0142D4004
-:1014A00049B10100000000D0BAB30100000000DE25
-:1014B000A1B10100000000F800B001009702224431
-:1014C000A553000094020041A1C10000550100DDB8
-:1014D000A1B10000E80200DEA1330100F8020040E3
-:1014E000813201005501004081B20000000000453A
-:1014F000BFB301005001A2D2777D0000000000D2EE
-:1015000061B10100000000DE63B101009E02A8404D
-:10151000813200005501004081B20000E802005411
-:10152000A5330100F802004081320100D0142D40A3
-:1015300049B10100000000F8D0B30100000000F83C
-:10154000D2B30100000000F8D4B30100000000F89D
-:10155000D6B30100000000F808B10100AC02004061
-:10156000819801006002004683300100550100406F
-:1015700081B20000000000A09EB00100000000E861
-:1015800043B10100000000E945B10100000000EA9C
-:1015900049B10100000000EBA1B101000000004FC3
-:1015A00040B101000400004081B20000040000408E
-:1015B00081B200000400004081B20000040000403D
-:1015C00081B200000400004081B20000040000402D
-:1015D00081B20000D0142E4049B101000500004046
-:1015E000A39B010000000040C1B30100080000DD22
-:1015F00081F40100BD02004010C90000C3020005D3
-:1016000081B000005001004081B20000CB02000513
-:1016100081B000005001004081B20000D0020044BF
-:10162000A5B30000D2020044A5B3000002000040B0
-:10163000A4E70100000000E081B10100FFFF00C14C
-:10164000F0890100C802224181500000C40200411B
-:10165000C1C30000DA02004081320100F8020040FC
-:10166000813201005501004081B2000002000040BB
-:10167000A4E70100000000E091B10100FFFF00C9F4
-:10168000F0890100C802224181500000CC020041D3
-:10169000C1C30000FFFF00DE85890100C80200C24F
-:1016A000E0B10000FFFF00DE95890100C80200CA1A
-:1016B000E0B100000400004081B2000004000040DE
-:1016C00081B200000400004081B20000040000402C
-:1016D00081B20000000000E7A7B30100000000D8BD
-:1016E000A9B301000000004049B10100AE0300CBE6
-:1016F000A3C901000000002046B10100000000D293
-:10170000F1B10100000000D3F1B10100000000D4EC
-:10171000F1B10100000000D0E1B10100000000D1F2
-:1017200061B101002000002062DD0100E202A8405A
-:1017300081320000000080CC85930100040000404D
-:1017400081B200000400004081B2000004000040AB
-:1017500081B20000000000E7A7B30100000000D83C
-:10176000A9B301000000004049B10100AE0300CB65
-:10177000A3C901000000002046B10100000000D212
-:10178000F1B10100000000D0F1B10100000000D370
-:10179000F1B10100E10200D4E1B100000400004019
-:1017A00081B200000400004081B20000040000404B
-:1017B00081B200000400004081B20000040000403B
-:1017C00081B200000400004081B20000040000402B
-:1017D00081B200000000A2CC85FF00000000005094
-:1017E00081B00100FA02A24181500000F902A2F288
-:1017F00080300000000080CC8583010004000040A0
-:1018000081B200000400004081B2000004000040EA
-:1018100081B20000B5030040A199010000002F41F2
-:1018200099B301000A032244816C0000120322488C
-:10183000816C00000C03224C816C000016032250C6
-:10184000816C000017032254816C00001903225898
-:10185000816C00001E03225C816C0000500100407E
-:1018600081B20000000000BC09B00100DD9F00CA89
-:1018700001B000000000004003B001000000004182
-:10188000F38301001003A242056C00000000004138
-:1018900005B00100DD9F22CA07140000DD9F00454E
-:1018A000F3930000DD9F2043956F0000DD9F80CA09
-:1018B00005300000DD9F220180300000DD9F00CB5D
-:1018C000DB910000570100BCABB30000000000BC7E
-:1018D000B1B30100DD9F00CACFB30000FF0000CA12
-:1018E00081880100DD9FA240747D000060002040DF
-:1018F000609901001B03A8B1823000001A03004068
-:1019000081B20000DD9F00CA79B3000004000040EE
-:1019100081B200000000004E81B0010000000043D1
-:10192000CB8301000000454081B201002203A241A7
-:10193000815000000000454081B201000000454098
-:1019400081B201002D039182823000000000008AE4
-:1019500080B00100AE9F004080CE01002B03A64066
-:10196000813200002D03564081B20000B5030040D3
-:10197000A19901000000005307900100B503004049
-:10198000A19901000000005207900100D89F00417A
-:101990008BB300000000004E81B001000000004247
-:1019A000CD8301000000464081B201003203A24114
-:1019B000815000000000464081B201000000464016
-:1019C00081B201003D039181823000000000008956
-:1019D00080B00100AE9F004080CE01003B03A640D6
-:1019E000813200003D03554081B20000B503004044
-:1019F000A19901000000005207900100B5030040CA
-:101A0000A19901000000005307900100D89F0041F8
-:101A10008BB30000B0030040A1990100C4142F4013
-:101A200099B301005701004049B100000400004093
-:101A300081B200000400004081B2000004000040B8
-:101A400081B200000400004081B2000004000040A8
-:101A500081B200003094004043990100009000F8EA
-:101A600080980100100000F288E40100200000408E
-:101A7000209901000000005F239101004D031F9198
-:101A80008032000030000040209901000000005F1B
-:101A90002391010050031F9180320000400000405C
-:101AA000209901000000005F2391010053031F9162
-:101AB000803200000000005F2391010055031F9158
-:101AC000803200000008804020990100040000409E
-:101AD00081B200000000004784B001000000A2486D
-:101AE000848400000000005F61B101000000005C20
-:101AF0008F9001000000004762B101005A03A84026
-:101B000081320000000800478EC801005803005CC5
-:101B10008F800000E00000406199010058152D40C1
-:101B20008DB00100D0142DF088B00100000000FA43
-:101B30008AB001000000004581B0010007000045A7
-:101B400082880100000000438BF001000000004883
-:101B500083E0010000000046829401002000004163
-:101B600060990100000000418DC001007403225FF4
-:101B70008D6C00006503A2418150000063030040AA
-:101B800081B2000008000040859801000000004478
-:101B900082B001000000004186B00100001C00433B
-:101BA00086D801000000A641855001007003004165
-:101BB00083E000006E030040813201000000004815
-:101BC00085E00100D0142F468494010020000042DB
-:101BD00060990100C0000040619901000000804050
-:101BE00081B201000400004081B200000400004006
-:101BF00081B200000400004081B2000004000040F7
-:101C000081B200000400004081B2000004000040E6
-:101C100081B20000070000458088010000000043F9
-:101C20008BF0010000040040839801008503A0416F
-:101C3000815000008303004182E8000000008041E1
-:101C40008EC001000400004081B20000040000408A
-:101C500081B200000000004049B1010000020040D4
-:101C600083980100003900404599010000000040C0
-:101C7000F1B101008B03A24183500000000000403D
-:101C800085B001000B00004482F401001A1500A683
-:101C900086B0010070150040459901000008004021
-:101CA000F199010000000042F0B10100003900404C
-:101CB000E1990100040000406199010070150043A2
-:101CC000629901009503A840813200009703225ACF
-:101CD000737D00007A000040619901009803A8B16B
-:101CE0007E3100000008004284C801009003A24138
-:101CF000835000000000804081B2010004000040D9
-:101D000081B200000400004081B2000004000040E5
-:101D100081B2000058152D408DB00100D0142DF077
-:101D200088B00100000000408FB00100010000A653
-:101D300090B0010000F800489098010000000045B4
-:101D400093B00100000000FA8AB001008003004057
-:101D500081320100020000A680B00100AC032240E5
-:101D6000826C0000B0030040813201005803004043
-:101D700081320100000000418DC00100B503225FE7
-:101D80008D6C0000A703A24193500000A503004002
-:101D900081B20000FF070047848801000000A640D0
-:101DA00081B20000ED9F0047803001000002004733
-:101DB0008EC80100B003004081B200000000004462
-:101DC00050B30100BB032018896C0000040000A67A
-:101DD00084B00100200000A686B001000010004081
-:101DE000559B0100BE03004081B20000040000A624
-:101DF00084B00100200000A686B001000010004061
-:101E0000559B01000000004250D30100000000A8D3
-:101E10004FB30100000000434ED301006E030040A9
-:101E2000813201008203004280300100B003004093
-:101E300081320100C70322A78F6C00005A030040C3
-:101E400081320100C403004081B2000000008040E4
-:101E500081B20100C8142EBB85B00100000000EE65
-:101E600082B0010000000041E0B10100000000A2CA
-:101E7000A0B3010000000044A5B30100E19F00CA27
-:101E8000A7330100E09F004081B200000400004041
-:101E900081B20000D6032242756F0000D8032241B0
-:101EA000756F0000DA031ECA81320000DC031FCA0E
-:101EB00081320000000000CAC9B10100DD9F00426C
-:101EC00075B30000000000CACDB10100DD9F0041E4
-:101ED00075B30000000000CACFB10100DD9F0040D3
-:101EE00075B30000008100A6C6B10100DD9F00406F
-:101EF00081B20000008000A6C6B10100DD9F004055
-:101F000075B300000400004081B2000004000040EE
-:101F100081B200004501004D933001004501004EA3
-:101F2000933001004501004C93300100EC9F0040CC
-:101F300081320100DD9F004081B2000004000040BA
-:101F400081B200000400004081B2000004000040A3
-:101F500081B200005495004045990100DD9F00CA00
-:101F6000E5B100000400004081B200000400004020
-:101F700081B200000400004081B200000400004073
-:101F800081B200000400004081B200000400004063
-:101F900081B20000CC142E4087B00100000000A2E6
-:101FA000A0B3010015040043B2330100000068DA59
-:101FB00089B001007C0000408B98010000000050B7
-:101FC00089F001000000004189D0010003000044B5
-:101FD000888C01000000004487C00100000000411F
-:101FE000A5B3010015040043B2330100000000DA7C
-:101FF000F1B101000000004487C001000000004171
-:10200000A5C301000B042244895000000B042244A4
-:102010008B500000FA03A250A56F000000000042A0
-:10202000A5E30100000000CAA7B30100E19F00BBC7
-:1020300085300100CC142ED295C30100AE0300CB35
-:10204000A3C901000000002042B1010000000050BF
-:1020500081B001000804A241815000000704A2F2EF
-:1020600080300000FA030040A5B3000000000042E9
-:10207000A5E30100000000CAA7B30100E19F00BB77
-:1020800085300100E09F004081B200000400004064
-:1020900081B20000000000D92BB101000010004007
-:1020A00083980100DB00004081320100FFFF0094B3
-:1020B000B48B01000000804081B20100000000D913
-:1020C0002BB101000010004083980100DD000040AA
-:1020D0008132010000008094B4B30100040000408C
-:1020E00081B200000400004081B200000400004002
-:1020F00081B200000400004081B2000004000040F2
-:1021000081B200000400004081B2000004000040E1
-:1021100081B20000000000D92BB10100000000DAFC
-:1021200027B1010006C000402D990100DE000040EB
-:1021300081320100001000408398010002C4004178
-:102140002C990100DE000040813201000040004077
-:1021500083980100058200412C990100DE000040B7
-:10216000813201002D048094803200000C01004077
-:10217000813201002804004081B200000480004048
-:102180002D990100DE0000408132010000008040F6
-:1021900081B201003104001210C9000000488040E3
-:1021A0000B980100C04980400B980100804B804093
-:1021B0000B980100404D80400B980100004F80407B
-:1021C0000B980100C05080400B9801008052804065
-:1021D0000B980100405480400B980100005680404D
-:1021E0000B980100C05780400B9801008059804037
-:1021F0000B980100405B80400B980100005D80401F
-:102200000B980100C05E80400B9801008060804008
-:102210000B980100406280400B98010000648040F0
-:102220000B980100C06580400B98010080678040DA
-:102230000B980100406980400B980100006B8040C2
-:102240000B980100C06C80400B980100806E8040AC
-:102250000B980100407080400B9801000072804094
-:102260000B980100C07380400B980100807580407E
-:102270000B980100407780400B9801000079804066
-:102280000B980100C07A80400B980100807C804050
-:102290000B980100407E80400B9801000400004034
-:1022A00081B200000400004081B200000400004040
-:1022B00081B200000400004081B200000400004030
-:1022C00081B200000400004081B200000400004020
-:1022D00081B200005904001210C900000080804043
-:1022E0000B980100008280400B9801000084804020
-:1022F0000B980100008680400B9801000088804008
-:102300000B980100008A80400B980100008C8040EF
-:102310000B980100008E80400B98010000908040D7
-:102320000B980100009280400B98010000948040BF
-:102330000B980100009680400B98010000988040A7
-:102340000B980100009A80400B980100009C80408F
-:102350000B980100009E80400B98010000A0804077
-:102360000B98010000A280400B98010000A480405F
-:102370000B98010000A680400B98010000A8804047
-:102380000B98010000AA80400B98010000AC80402F
-:102390000B98010000AE80400B98010000B0804017
-:1023A0000B98010000B280400B98010000B48040FF
-:1023B0000B98010000B680400B98010000B88040E7
-:1023C0000B98010000BA80400B98010000BC8040CF
-:1023D0000B98010000BE80400B98010004000040F3
-:1023E00081B200000400004081B2000004000040FF
-:1023F00081B200000400004081B2000004000040EF
-:1024000081B200000400004081B2000004000040DE
-:1024100081B200000000004087B1010000000040D0
-:1024200097B001000000004B80B10100010000A640
-:1024300082B1010082048541974000000000004005
-:1024400097B101000000004097B001000000004B70
-:1024500090B10100010000A692B1010087048541FE
-:10246000974000000000804081B20100040000405D
-:1024700081B200000400004081B20000040000406E
-:1024800081B200000400004081B20000040000405E
-:1024900081B2000090046040813200000000001210
-:1024A00080B10100FFFFF04B82890100930460407E
-:1024B000813200000000004A80B101000100F0A656
-:1024C00082B101009604604081320000FFFF004BA2
-:1024D000848901000000F0C224B001000000004A1D
-:1024E00090B10100FFFF804B928901000000004A7B
-:1024F00090B10100010080A692B10100FFFF004BE6
-:1025000094890100000080CA94B0010004000040DA
-:1025100081B200001000004E98E4010000000007A6
-:10252000989401000000004399E001000000008041
-:10253000989401000000004999E001000000004C5F
-:1025400088940100A604474081320000AD04222097
-:10255000876F000000001F4081B2010000000040B2
-:1025600081B201000000004081B201000000004083
-:1025700081B20100A604004081B2000000001F806B
-:1025800086B30100B004224F777D0000C0040040F4
-:10259000813201000000004F61B1010000000044E1
-:1025A00062B10100B104A84081320000B804224B9E
-:1025B000897C0000B604224F777D0000C0040040F3
-:1025C000813201000000004562B10100B604A8405C
-:1025D000813200000000802087B301000400004029
-:1025E00081B200000400004081B2000004000040FD
-:1025F00081B200000400004081B2000004000040ED
-:1026000081B200000400004081B2000004000040DC
-:1026100081B200000000005099B001006F0000403E
-:1026200061990100C104A8B152330000C604224BD5
-:10263000537F00006F00004061990100C404A8B1FD
-:102640007E310000C104A241995000000000A24F59
-:1026500077FD00000400004081B20000040000404B
-:1026600081B200000400004081B20000040000407C
-:1026700081B200000400004081B20000040000406C
-:1026800081B200000400004081B20000040000405C
-:1026900081B200001000004E98E401000000000725
-:1026A000989401000000004399E0010000000080C0
-:1026B000989401000000004899E00100D604004C05
-:1026C00088940000D604474081320000DD042220B7
-:1026D000876F000000001F4081B201000000004031
-:1026E00081B201000000004081B201000000004002
-:1026F00081B20100D604004081B2000000001F80BA
-:1027000086B30100E004224F777D0000F004004012
-:10271000813201000000004F61B10100000000445F
-:1027200062B10100E104A84081320000E804224ABD
-:10273000897C0000E604224F777D0000F004004011
-:10274000813201000000004562B10100E604A840AA
-:10275000813200000000802087B3010004000040A7
-:1027600081B200000400004081B20000040000407B
-:1027700081B200000400004081B20000040000406B
-:1027800081B200000400004081B20000040000405B
-:1027900081B200000000005099B001006F000040BD
-:1027A00061990100F104A8B152330000F604224AF5
-:1027B000537F00006F00004061990100F404A8B14C
-:1027C0007E310000F104A241995000000000A24FA8
-:1027D00077FD00000400004081B2000004000040CA
-:1027E00081B200000400004081B2000004000040FB
-:1027F00081B200000400004081B2000004000040EB
-:1028000081B200000400004081B2000004000040DA
-:1028100081B200007B000040619901000005A8B171
-:102820008030000012051D4080320000401800403A
-:1028300049990100040000A686B001001005A240DD
-:1028400086040000DE9F9C4080320000FFFF0040B5
-:1028500088880100300500504731010036000044EF
-:1028600088CC01000C055240813200003005004048
-:10287000473101000000004189B0010030050048E7
-:10288000473101003005000547310100DE9F00405F
-:1028900081B200002800004047991B00DE9F0041E4
-:1028A000E1C11A007818004049991B00190522540B
-:1028B000817C1A001405424081321A00008200B364
-:1028C00067DF1B0000001A4493931B0028000040A0
-:1028D00047991B00300500418930010027050F4052
-:1028E00080320000FF7F00408888010030050050E2
-:1028F000473101003600004488CC01001F05994093
-:10290000803200000000004889D0010021059B4072
-:10291000803200000000004C89D0010023051F44D4
-:1029200080320000300500404731010000000041C6
-:1029300089B00100300500484731010030050058DA
-:1029400047310100DE9F004081B2000010000040CE
-:1029500086F401006F00004386880100DE9F260593
-:10296000473100003005004189300100DE9F004002
-:1029700081B200000400004081B200000400004069
-:1029800081B200000400004081B200000400004059
-:1029900081B200000000A044F041010000000040AE
-:1029A00081B2010000008041E1C10100040000404B
-:1029B00081B200000400004081B200000400004029
-:1029C00081B200000400004081B200000400004019
-:1029D00081B200004C010007913001000000A240CC
-:1029E00097EC00000000800591C001000400004049
-:1029F00081B200000400004081B2000004000040E9
-:102A000081B200000400004081B2000004000040D8
-:102A100081B200004C010040813201004405A24017
-:102A2000976C00003A000040B39B01004505004050
-:102A300081B2000040000040B39B01001004004040
-:102A400081320100000000DAF5B1010010040042FB
-:102A5000B3430100000000DAF5B1010010040042A8
-:102A6000B3430100000000DAF5B101004E00004060
-:102A7000B39B01001004004081320100080000DA1D
-:102A8000F7F5010050000040919801000000004758
-:102A90008FB0010010040048B2330100000000DADA
-:102AA000F7B10100080000DAF7F50100000000426C
-:102AB00091C001005005A2418F500000000000416C
-:102AC00045D1010008000040B39B01001004004004
-:102AD00081320100000000DAFDB101000A0000406F
-:102AE000B39B01001004004081320100000000DAB5
-:102AF000FDB101001A000040B39B0100100400402A
-:102B000081320100000000DAFDB101001800004030
-:102B1000B39B01001004004081320100000000DA84
-:102B2000FDB1010038050040813201001E0000485F
-:102B3000B2CB01001004004081320100000000DA35
-:102B400091C0010000000048B2CB01001004004019
-:102B50008132010000006EDA8FB0010002000048EF
-:102B6000B2CB01001004004081320100000000DA05
-:102B7000FDB1010004000048B2CB01001004004088
-:102B800081320100000080DAFDB101000400004044
-:102B900081B200007A052245FD7F0000401600400A
-:102BA00045990100DB9F00404931010008000048C1
-:102BB000B2CB010015040040813201007805A2402B
-:102BC0008F6C00007D052220B56F00007A05004063
-:102BD00081B20000DA9F004081321F007D05224053
-:102BE000976C1E007A05424081321E000000004FA3
-:102BF00067931F00DF9F005867931E005416004024
-:102C000047991F00000000FEF4B11F0000000040C3
-:102C100081B21F00000000FEF4B10100000000407E
-:102C200081B20100000000FEF4B10100000000408C
-:102C300081B20100000000FEF4B10100000000407C
-:102C400081B20100000000FEF4B10100000000406C
-:102C500081B20100000000FEF4B10100000000405C
-:102C600081B20100000000FEF4B101004600004006
-:102C7000B39B01001004004081320100080000DA1B
-:102C8000F7F501004800004095980100000000445D
-:102C900097B001001004004AB2330100000000DACE
-:102CA000F7B10100080000DAF7F50100000000426A
-:102CB00095C001009005A241975000002A000040F5
-:102CC000A59B010040160040A19B0100000000CA26
-:102CD000A7B30100E19F00BB85300100E09F0040E9
-:102CE00081B200000400004081B2000004000040F6
-:102CF00081B200000400004081B2000004000040E6
-:102D000081B200000400004081B2000004000040D5
-:102D100081B20000B8052245FD7F0000E0150040AB
-:102D2000479901001A0000A280DC01000000005059
-:102D3000F1B10100F0150040F1990100000000CA56
-:102D4000F1B101000700004061990100200000403E
-:102D500062DD0100A705A8BBE131000000000050C2
-:102D600083B00100AA05A24183500000A905A2F288
-:102D7000823000004C01004081320100B005A240C9
-:102D8000976C00003A000040B39B0100B105004081
-:102D900081B2000040000040B39B0100F0150040EC
-:102DA000439901001004004081320100B805A2FAE5
-:102DB000B46F000010040042B3430100B805A2FA4A
-:102DC000B46F000010040042B3430100BB0522FAB7
-:102DD000B46F0000B8054240813220000000004E70
-:102DE00067932100DF9F0058679320004016004042
-:102DF00045992100DB9F004049312100F615004034
-:102E0000439921005C1600404599210000006EFAAC
-:102E10008EB021000000004081B20100000000FEE1
-:102E2000F4B101000000004081B20100000000FE8A
-:102E3000F4B101000000004081B20100000000F088
-:102E4000B4B30100C905A2408F6C0000FC1520201E
-:102E5000E1B10100CE05004081B22400DA9F0040BC
-:102E600081322500CE052240976C2400CB054240DC
-:102E7000813224000000004F67932500DF9F005837
-:102E80006793240038050040813225001E00004869
-:102E9000B2CB25001004004081320100D30522503E
-:102EA000B56F00000000005091C001000000004814
-:102EB000B2CB0100F615004043990100200400F256
-:102EC000B433010002000048B2CB0100F815004005
-:102ED00043990100200400F2B433010004000048CB
-:102EE000B2CB0100FA15004043990100200400F222
-:102EF000B433010008000048B2CB0100FC150040CB
-:102F000043990100000000F094B00100FFFF004A67
-:102F1000B48B010020040040813201000A00004807
-:102F2000B2CB01001000004AB4F7010020040040B9
-:102F30008132010038050040813201001E00004846
-:102F4000B2CB01001004004081320100E90522509B
-:102F5000B56F0000EA050050B5B300000000004066
-:102F6000B5B301002004004081320100E09F004021
-:102F700081B200000400004081B200000400004063
-:102F800081B200000400004081B200000400004053
-:102F900081B2000000160040479901003031004026
-:102FA000F599010032330040F599010034350040B5
-:102FB000F599010036370040F59901003839004095
-:102FC000F599010041420040F59901004344004059
-:102FD000F599010045460040F59901004748004039
-:102FE000F5990100494A0040F59901002C00004084
-:102FF0008398010000000040F7B10100FC05A241E8
-:103000008350000080162E0683B00100360000FBBE
-:10301000F6A90100FF05A2418350000022000040F4
-:1030200083980100000000FBF6B101000206A241F6
-:10303000835000006200004095980100DC9F004032
-:103040008132010000162D0683B001008016004079
-:10305000459901005C0000FBF6A901000806A241A9
-:103060008350000000000070F9B101000000007101
-:10307000F9B1010000000072F9B101000000007315
-:10308000F9B1010000000074F9B1010054000040E2
-:1030900095980100DC9F0040813201000000007023
-:1030A00095B0010014062270B56F00000000804149
-:1030B00097B001000000804097B00100040000407C
-:1030C00081B200000400004081B200000400004012
-:1030D00081B20000456700A6E0B201000123007044
-:1030E000E19A0100CDEF00A6E2B2010089AB0071C8
-:1030F000E39A0100BA9800A6E4B20100FEDC007277
-:10310000E59A0100321000A6E6B201007654007381
-:10311000E79A0100D2C300A6E8B20100F0E1007412
-:10312000E99A01008016004A44C901000000000726
-:1031300081B001000000004A80D001000000004082
-:10314000F7B101002506A241815000008016004A17
-:1031500044C90100FC162A47E7B501000300004AF4
-:10316000E8E50100000000408DB001005003004080
-:10317000A399010080163D468DE00100000000503B
-:1031800089B00100000000FC40B0010000000041D7
-:10319000A3C101002E06A24189500000000000706A
-:1031A000EBB2010000000071EDB2010000000072FE
-:1031B000EFB2010000000073F1B2010000000074E2
-:1031C000F3B201000000004083B001000F00004195
-:1031D0008088010050030040A2C901004B06A050A6
-:1031E000836C00000D00004098C801000000004FF3
-:1031F000998401005003004CA2C901000000002086
-:1032000086B001000800004098C801000000004F8F
-:10321000998401005003004CA2C901000000002065
-:1032200086A401000200004098C801000000004F81
-:10323000998401005003004CA2C901000000002045
-:1032400086A4010050030040A2C901000000004311
-:1032500040A401000100002088E401000000005F9C
-:1032600041F0010000000044409401000500007599
-:1032700089E401001B00007585F401000000004492
-:10328000849401005506A353836C0000000000766F
-:1032900089B00100000000778984010000000076F9
-:1032A0008BB00100000000208BA40100000000781A
-:1032B0008B840100640600458894000027000041CB
-:1032C00080CE01005A06AA4081320000000000763C
-:1032D00089B001000000007789A40100640600782D
-:1032E00089A400003B00004180CE01005706AA409F
-:1032F000813200000000007689B0010000000077F4
-:1033000089840100000000768BB001000000007885
-:103310008B840100000000458894010000000077C4
-:103320008BB00100000000788B840100640600452A
-:10333000889400000000004484C00100000000796F
-:1033400085C001000000002084C001006B06A3536B
-:10335000836C0000825A00A684C001009979004263
-:1033600084C801007806004081B2000027000041B7
-:1033700080CE01007006AA4081320000D96E00A6FE
-:1033800084C00100A1EB004284C80100780600401F
-:1033900081B200003B00004180CE01007506AA40CA
-:1033A000813200001B8F00A684C00100DCBC0042FB
-:1033B00084C801007806004081B2000062CA00A6FD
-:1033C00084C00100D6C1004284C8010078060040D4
-:1033D00081B2000000000078F3B201000000007725
-:1033E000F1B201001E00007689E4010002000076BF
-:1033F000EFF6010000000044EE96010000000075A9
-:10340000EDB2010000000042EAB2010000000041FC
-:1034100083C001004F00004180CE010037062A40E2
-:103420008132000000000075E1C20100000000765A
-:10343000E3C2010000000077E5C20100000000784F
-:10344000E7C2010000000079E9C201002B068141BA
-:103450008D4000000000804081B201000400004067
-:1034600081B200000400004081B20000040000406E
-:1034700081B200000400004081B20000040000405E
-:1034800081B200000400004081B20000040000404E
-:1034900081B2000000000050FD9301004016004082
-:1034A00045990100DB9F00404931010008000048B8
-:1034B000B2CB01001504004081320100B906224060
-:1034C0008F6C0000DA9F004081320100B906A240F3
-:1034D000976C00005E160040439901007C1620F6B0
-:1034E000E0B101000000004031B301009D06224F11
-:1034F0008F7C000000000051FD9301009F062240D8
-:103500008F7C0000A3060054FD930000A106224218
-:103510008F7C000000000052FD930100A3062241B1
-:103520008F7C000000000053FD930100B70622517C
-:10353000FD7F000038050040813201000C0000488A
-:10354000B2CB01001004004081320100B206A2405B
-:10355000B56F00001E000048B2CB01001004004807
-:1035600096300100000000DA97C001000400004B13
-:10357000B2CB010010040040813201000E0000486F
-:10358000B2CB010020040040813201000C00004851
-:10359000B2CB010000000030B5B3010020040040B0
-:1035A000813201000E000048B2CB0100100400403F
-:1035B00081320100B6062240B56F0000BA06005401
-:1035C000FD93000000000051FD8301001C0000FE7F
-:1035D0007FD90100BA06A6408132000000000055E4
-:1035E000FD9301000000804081B201000400004012
-:1035F00081B200000400004081B2000004000040DD
-:1036000081B200000400004081B2000004000040CC
-:1036100081B20000E79F004081320100C406225CB5
-:103620001F7C0000E39F00881CB00000E99F005C45
-:103630001F00010000002E0548B1010000000040FD
-:10364000E1B1010004002D0348B10100000000F0C9
-:103650003CB001002800001402C801000000000175
-:1036600034B0010000002D0532B001002200000539
-:103670000AC801001000000348C90100000000F85A
-:1036800018B00100000000F804B00100000000F8CC
-:103690000EB001000C0000A40CC80100EA9F00401D
-:1036A000813201000000004023B001000A0722011E
-:1036B0008032000000003C4423E0010000002EA402
-:1036C00080B001000000001048C10100D906A30726
-:1036D000026C0000DA0668011AB0000000006807FA
-:1036E0001AB001000000000D02D00100000000052A
-:1036F000F0B101000000000CF0B101000000000278
-:10370000E0B101000000000D0AC00100EC062240FB
-:10371000036C0000E6062242236C0000000000411A
-:1037200023C001000000004761B10100200000A497
-:1037300062DD01002307284081320000E3060040DB
-:1037400081B200000000001080C0010000000047AE
-:1037500061B101000000004062B10100E806A8402C
-:1037600023300000E39F00881CB0000023070040C6
-:1037700081B200000000001080C00100000000477E
-:1037800061B101000000004062B10100EE06A840F6
-:1037900023300000E39F00881CB0000022000019C5
-:1037A00048C9010000002D1448C101000F0000F2BB
-:1037B0003A880100000000423BE001000E000014C6
-:1037C00002C801000000001D02C00100FA06231A11
-:1037D000025000000000004603C001002307000162
-:1037E00034C000000C002D1D48C10100F00000F2A3
-:1037F000308801000000004231F001000000001498
-:1038000002B001000000001D02C00100000000180D
-:1038100002C001000207221A025000002307000123
-:1038200034C000002200001948C9010002002D1414
-:1038300048C10100000000F614B001000000001DA6
-:1038400014D001000000001814D001000000001E78
-:1038500024B001001200001710C801002307001A4D
-:1038600010C0000000003C4423E00100000000A460
-:1038700086B0010000002E1048C101000F07A312FE
-:103880000E6C0000100760071AB000000000601204
-:103890001AB001000000680D16940100FFFF000B34
-:1038A00016D8010000000008F0B101000000000C73
-:1038B000F0B1010000000002E0B1010000000010C2
-:1038C00086C001000000004661B1010020000043F5
-:1038D00062DD01001707A85C1F1000004007220DE1
-:1038E000145000004007220D245000000000000D7D
-:1038F00010C001001E072242236C00002307004174
-:1039000023C000000000004661B10100400000102B
-:1039100062DD01001F07A85C1F000000E39F008814
-:103920001CB000000000004023B001003F07A20DC2
-:103930000E5000002E0722461F7C000000000046AB
-:103940001F8001003080001042C901002C0722F2C4
-:10395000640600000000004761B101004000001053
-:1039600062DD01002907A84081320000E39F008842
-:103970001CB0000020800003469901000000005F99
-:10398000E191010000002D0648B10100000000F89F
-:1039900018B00100000000F804B0010033071FF068
-:1039A0000E300000D306004C0DC0000000002E5F5A
-:1039B0000F800100D3062307146C000030000010B4
-:1039C00048C9010024000040F199010000000003F3
-:1039D000F0B1010000000000F0B10100000000168D
-:1039E000F0B101002400000000C801000000004701
-:1039F00061B10100200000A462DD01003C07A8467F
-:103A00001F100000D30600030CB00000D306000D09
-:103A100018C000005F07A2441F7C000000000019CE
-:103A20000AB001002200000548C901000A002D1457
-:103A300048C1010002002040E5B10100040020401F
-:103A4000E5B101000D002D1D48C10100090000F382
-:103A5000388801000D002050E7B1010004002D401E
-:103A60003FB00100000000F432B00100040020402B
-:103A7000E1B101002200000548C9010000002D1439
-:103A800048C101000200001D94F401000000004044
-:103A900091B001005207A0FC9040000000000041DE
-:103AA00091C001005007A24195500000000000A401
-:103AB00096B0010004002E0548B101000000004846
-:103AC000F0B101000000004B48B1010000000018F7
-:103AD00048C101000200001894F4010000002D18F4
-:103AE00090B001005C07A0FC904000000000004185
-:103AF00091C001005A07A241955000000000004803
-:103B0000E0B1010010002040E5B1010004002D05E6
-:103B100048B10100000000F880B02D00000000F066
-:103B200016B02D002200000548C92D000000001429
-:103B300048C12D00640743303D072C000000009E63
-:103B400085B02D0000001B413DC32D000400204224
-:103B5000ECB12D000000001E82B0010002002E1DFD
-:103B600082C001000000661882C00100000000420F
-:103B700080C001006E07A0418044000000000041A9
-:103B800081C001001000004092F401000A002E30B4
-:103B900081840100720790409240000000000041C3
-:103BA00093C001000000662093A401000000001DE6
-:103BB00048C1010004002019E8B101000000001E06
-:103BC00016C001007807A01916440000000000414B
-:103BD00017C001000D002F1E32C001007D07A2405A
-:103BE000156C00007C07A01C16400000000000417E
-:103BF00017C00100000063F33894010010000005B5
-:103C000048C9010004002E1E98B001000000601A8F
-:103C100098C001000C002040E1B101008B07224652
-:103C20001F7C0000000000461F8001003080001053
-:103C300042C90100890722F2640600000000004723
-:103C400061B101004000001062DD01008607A8405C
-:103C500081320000E39F00881CB000002080000338
-:103C6000469901000000005FE191010030800010E2
-:103C700044C901001200001AF0C901000000001739
-:103C8000F0B1010010000005E0C901003000001093
-:103C900080C801000000004461B101002000004024
-:103CA00062DD01009107A840813200009B07225C81
-:103CB0001F7C000000003C4423E0010000002D10A8
-:103CC00048C101009B0722F2640600000000004684
-:103CD00061B101004000001062DD01009807A840BA
-:103CE00081320000E39F00881CB00000EB9F005C65
-:103CF0001F00010020002F0548B101000000000B4B
-:103D0000E4B101000000005017F00100A10790F29B
-:103D1000164000000000004117C0010000006620AE
-:103D200017A40100100000142AC801000000001DA3
-:103D30002AC00100000000502BE00100000000F24A
-:103D40002A9401003080001042C90100AC0722F221
-:103D5000640600000000004461B101004000001052
-:103D600062DD0100A907A84081320000E39F0088BE
-:103D70001CB000000080001710DC0100C9072240C1
-:103D8000156C0000B407A2441F7C00000000004432
-:103D90001F900100B307229F136C000002000088EF
-:103DA0001CCC0100E49F004081B2000000000041F3
-:103DB0003FC30100E69F004081320100B707A241E6
-:103DC000877C00000000001E3EC00100C9072240A1
-:103DD000156C0000BA07201E146C00000000000AD9
-:103DE0003CB00100E59F001E24300100BF072208FF
-:103DF0002E3000000000005211C001000000001A27
-:103E000010C001002307004017B00000E49F0088A5
-:103E10001CB00000E59F004081320100BC07A208F1
-:103E20002E300000808000A604B001000600004093
-:103E300087980100008000034499010004002204D7
-:103E4000E0310000E89F001F8C30010000000040BE
-:103E50000FB00100E29F005C1F9000000080000393
-:103E60004499010004002204E0310000E69F004074
-:103E700081320100CE07A241877C0000CF07001EDF
-:103E80003EC000000000001F8CB001000000004098
-:103E900005B00100E89F00400F300100E29F005C88
-:103EA0001F9000000400004081B2000004000040A8
-:103EB00081B200000400004081B200000400004014
-:103EC00081B200000400004081B200000400004004
-:103ED00081B200000400004081B2000004000040F4
-:103EE00081B200000400004081B2000004000040E4
-:103EF00081B200000400004081B2000004000040D4
-:103F000081B200000400004081B2000004000040C3
-:103F100081B200000400004081B2000004000040B3
-:103F200081B200000400004081B2000004000040A3
-:103F300081B200000400004081B200000400004093
-:103F400081B200000400004081B200000400004083
-:103F500081B200000400004081B200000400004073
-:103F600081B200000400004081B200000400004063
-:103F700081B200000400004081B200000400004053
-:103F800081B200000400004081B200000400004043
-:103F900081B200000400004081B200000400004033
-:103FA00081B200000400004081B200000400004023
-:103FB00081B200000400004081B200000400004013
-:103FC00081B200000400004081B20000F70700BC8D
-:103FD00080B200000380004081B2000003800040F6
-:103FE00081B200000380004081B2000003800040E5
-:103FF00081B200000380004081B2000003800040D5
-:1040000081B200000380004081B2000003800040C4
-:1040100081B200003180004081B200003480004055
-:1040200081B200003580004081B2000004000040F1
-:1040300081B200001B80818080320000E787A240AF
-:10404000916F00000000004C90B301005C952EA21F
-:1040500080B00100FF000080F489010090952AC81B
-:10406000E5B10100000000A1F0B101000000004036
-:10407000F0B10100000000A4F0B10100000000D088
-:10408000F0B10100000000D1F0B10100000000D249
-:10409000F0B101000000004CF0B10100000000D4BC
-:1040A000F0B10100000000D3F0B10100000000EE0B
-:1040B000F0B101000000004EF0B10100000000402E
-:1040C00044B1010018801181983000000000514077
-:1040D00081B201001A801182983000000000524025
-:1040E00081B20100E7870048FD930000B60300405D
-:1040F000A19901002380A242FD7F00002080008062
-:1041000080320000228011818230000022805140E4
-:1041100081B2000022801182823000002280524051
-:1041200081B200002C800048FD93000027800080B1
-:10413000803200002680A253077C0000000051530B
-:10414000079001002A800052079000002980A252A7
-:10415000077C00000000525207900100000000534D
-:104160000790010000000048FD9301000000004698
-:10417000F39301005C952EA252B30100FF00008072
-:10418000F48901000000004CE4B10100000000A926
-:1041900045B101003080004C80B200000000454075
-:1041A00081B201000000554081B20100C682054085
-:1041B00049B10000C682054049B100000000054039
-:1041C00049B101004C010040813201000000004B68
-:1041D000DEB2010000000040FD9301000000004835
-:1041E000FD830100020000409B9B0100000000A530
-:1041F0009CB30100480300408132010058952044DF
-:10420000E0B101000494004043990100000000F275
-:1042100024B10100000C00EE968801000000004A65
-:1042200097F001004480A243976C00000000004218
-:10423000FD93010000C000A636B10100D01400407B
-:104240004799010005000040F59901000038004041
-:10425000F599010000060040F599010003000040B7
-:10426000F599010005100040F59901000209004090
-:10427000F599010004000040F59901006003004039
-:10428000813201008803004081320100A003004018
-:1042900081320100B982004081320100B1820040C8
-:1042A0008132010060952040E1B10100709520400D
-:1042B000E1B1010000000049DD9101000000004073
-:1042C00091B30100000000407BB30100A0980040C2
-:1042D000813201000000004085B301005C95204060
-:1042E000E1B101003C8200408132010090060040B3
-:1042F000813201000000005F2F810100A281004097
-:1043000081320100A5980040813201000000454043
-:1043100081B201000000554081B2010001830040DC
-:1043200081B200000400004081B20000040000409F
-:1043300081B200000400004081B20000040000408F
-:1043400081B200000400004081B20000040000407F
-:1043500081B200002800004047990100C682004158
-:10436000E1C1000078180040499901001905225464
-:10437000817C00006C80424081320000008200B4E9
-:1043800069DF010000001A449393010028000040F7
-:10439000479901001805004081B200000400004068
-:1043A00081B200000400004081B20000040000401F
-:1043B00081B200000400004081B20000040000400F
-:1043C00081B200000400004081B2000004000040FF
-:1043D00081B2000055820040813201007D80224080
-:1043E000976C00007A804240813200000000004F4C
-:1043F00069930100438100586993000054160040FE
-:1044000047990100000000FEF4B101008005004062
-:1044100081B2000080804240813200000000004EE6
-:1044200069930100438100586993000040160040E1
-:10443000459901004005004049310100F615004052
-:10444000439901005C1600404599010000006EFA96
-:104450008EB00100C105004081B2000004000040A0
-:1044600081B200000400004081B20000040000405E
-:1044700081B200000400004081B20000040000404E
-:1044800081B200000400004081B20000040000403E
-:1044900081B200009680004081B200005582004049
-:1044A0008132010096802240976C00009380424048
-:1044B000813200000000004F6993010043810058E1
-:1044C0006993000038050040813201001E00004859
-:1044D000B2CB0100D005004081B2000004000040D2
-:1044E00081B200000400004081B2000004000040DE
-:1044F00081B200000400004081B2000004000040CE
-:1045000081B200000400004081B2000004000040BD
-:1045100081B200008302004081B20000B802004076
-:1045200081B20000D49F004081B20000D59F0040BE
-:1045300081B20000D69F004081B20000D79F0040AA
-:1045400081B200007201004181C000005501514953
-:10455000FD9300005501524AFD9300005501554955
-:10456000FD8300005501564AFD83000050019181F2
-:10457000803000005501454081B200005001918219
-:10458000803000005501464081B20000000000402C
-:1045900089B00100000000F880B00100000000F0C8
-:1045A00016B001002200000548C9010000000014F7
-:1045B00048C10100B48043303D0700000000009E68
-:1045C00085B0010000001B413DC3010004002042F2
-:1045D000ECB101000000A240916F0100000000401A
-:1045E00049B10100AE0300CBA3C9010000000020C7
-:1045F00046B10100C480A240E16D0000000000D27D
-:10460000F1B10100000000D3F1B10100000000424F
-:10461000F0B101000000004561B101002000002060
-:1046200062DD01000000A8D0E1B10000C1800040BF
-:1046300081B20000000000A898B001000480004092
-:104640008BB30000B1030040A1990100C980A242D0
-:10465000976F000000000045A1C1010000000000AC
-:1046600080B001000000A2048094000080153F4249
-:1046700097E301000000004049B101000000600321
-:10468000029401000000004007B00100040000CBCC
-:1046900099CB0100000000CCF3830100D380A2423B
-:1046A000976F0000000000CBF3930100AE0300CB36
-:1046B000A3C901000000002044B101000000004433
-:1046C000F1B1010000000000F0B1010000000004A1
-:1046D000F0B10100000000A1E0B1010005000040C0
-:1046E000619901002000002062DD0100DA80A8400D
-:1046F00081320000F9020020423101000000A24195
-:10470000056C0100000080CBDB9101000000194125
-:104710008BB301006000004061990100E080A8B106
-:104720008C3300006000004061990100E280A8B174
-:1047300094330000E88014C681320000180000C6DF
-:1047400083F401002283224F83040000C4800040D0
-:1047500081B20000FF0100C681880100000000C690
-:1047600097A30100C4801F5C975300006D821EC692
-:1047700081320000F2802248FD7F0000F280225842
-:10478000816C0000F2802248816C0000C000004073
-:1047900084CC0100F2809F428032000022830040DE
-:1047A00081B20000C480A2C68F060000C4801EC66D
-:1047B0008132000000002F4381F00100F6800040AC
-:1047C00010C900004481004081B200007E81004099
-:1047D00081B20000398200CA63B3000075810040D5
-:1047E00081B200005581004D83B000006081004E11
-:1047F00061B100004C81004085B000005581004C43
-:1048000083B000002E81004085B00000F881004098
-:1048100049B1000086810040C1B10000F481004030
-:1048200081B200004C81004085B00000F0030040E0
-:1048300049B10000228300CA9BB300009081004070
-:10484000C1B1000094810040C1B100009B810040D3
-:10485000C1B100009C810040C1B100009D810040B9
-:10486000C1B100009E810040C1B100009F810040A5
-:1048700081B000009F81004181B000002D82004086
-:1048800081B20000AE8200BBABB300003A8200CA26
-:10489000CFB30000C803004049B10000E803004066
-:1048A00081B20000C480004081B200002283004039
-:1048B00081B20000E003004081B20000228300CA00
-:1048C00077B300005681004D83B000005E81004E3A
-:1048D00061B100004C8100BB85B000005681004CE6
-:1048E00083B000004C8100BB85B000002E8100BB6E
-:1048F00085B000002081004081B20000228300CA00
-:104900004DB300007005004049B10000A005004013
-:1049100049B10000268122428F6F00002881224188
-:104920008F6F00002A811ECA813200002C811FCAAD
-:1049300081320000000000CAC9B101002283004298
-:104940008FB30000000000CACDB1010022830041F6
-:104950008FB30000000000CACFB1010022830040E5
-:104960008FB30000008100A6C6B101002283004081
-:1049700081B20000008000A6C6B101002283004081
-:104980008FB30000781800404999010010002F9C57
-:1049900089B00100468100403933010018002F9B87
-:1049A00089B00100468100403733010000002F9A92
-:1049B00089B00100468100403533010008002F997D
-:1049C00089B001004681004033330100008000AE11
-:1049D00047C90100C480A240E16D00008000004092
-:1049E000F1990100000000CAF1B10100000000428D
-:1049F000F0B1010040180040E199010000000045BD
-:104A000061B10100200000AE63DD0100418128405A
-:104A1000813200003E81004081B20000418142406D
-:104A2000813200000000005C6993010022831A4477
-:104A3000939300004481424081320000438100583A
-:104A40006993000000000044F0D101000000A44080
-:104A500081B200004B81A240E16D000000000044E3
-:104A600045D1010000008040E1B10100000080411B
-:104A7000E1D101004C81375C61310000000000424F
-:104A800062B1010052812840813200004D81225CD8
-:104A9000777D0000C480174081B200004D81004046
-:104AA00081B20000000000CA63B101005281A84039
-:104AB000813200002283174081B2000057810040FC
-:104AC00081B00000578100BB81B0000000000041B0
-:104AD00060B10100C480A241767D0000000000406A
-:104AE00062B101005981A84081320000000000CA73
-:104AF00063B1010022832840813200005B810040C5
-:104B000081B200005095004047990100618100BBCF
-:104B100087B0000050952F4087B00100658122408A
-:104B2000957F0000C480A240E16D0000C480224057
-:104B3000956F0000228360409583000002002DF0F5
-:104B400084B00100C4802240856C0000C480A24073
-:104B5000857C0000C480A24E777D000069813640CC
-:104B6000813200000000004262B101006A81A84069
-:104B7000813200000000004362B101006C81A84056
-:104B800081320000000000CA63B101006E81A840BC
-:104B9000813200000000164081B201007481224180
-:104BA00043510000000800CA95CB01006881004114
-:104BB00085C0000022830040E1B100007781A2425D
-:104BC000676F00000000004167B301007781424039
-:104BD000813200000000004065B301000000004089
-:104BE0009383010000001ACA6997010022832640BE
-:104BF000813200007C8142408132000022831A44CD
-:104C000093930000C4802043956F0000228380CAE4
-:104C10006733000022832240656F0000C480A248F1
-:104C2000DB7D00002283006FDB91000085000040E7
-:104C30008132010035802240803200002283004012
-:104C400081B2000000000058959301000000005F51
-:104C5000959301008C81A244216F00000000005F49
-:104C6000958301000000005E95930100000000574D
-:104C700095930100000000CAC3B101008F81225B3F
-:104C8000957F00000000004BFD930100228300404F
-:104C900081B200001BFD00CA959B01000D0100CAF6
-:104CA000C53101000000005F95830100228300CA26
-:104CB000C5B10000DF6F00CA959B010000000055E0
-:104CC00095930100000000CAC7B101002283225F52
-:104CD000957F00000D010040813201000000005F5F
-:104CE00095830100228300CAC7B10000228300CA55
-:104CF000C9B10000228300CACBB10000228300CAE0
-:104D0000CDB10000228300CACFB1000000002E42C6
-:104D100081E001009814004048C90100228300CAC4
-:104D2000E1B100000000004009B10100200000A630
-:104D300082B00100A481A25E0B7D000000800041D2
-:104D400008990100A681A25E0B7D0000208000A6CC
-:104D500008B10100A8819F8582300000000000306A
-:104D600083840100DD812230836C0000A781A24F83
-:104D70000B7D00000000004121B30100028000A66D
-:104D800082B0010028820040813201001000004101
-:104D900084E40100038000A682B001002882004064
-:104DA00081320100F0FF00418688010000000043CD
-:104DB000849401000F0000A686B0010010C40043D7
-:104DC00086980100BD81A243846C0000000000436E
-:104DD00021B30100200000A682B001001C000041A8
-:104DE00082DC0100BA81A25E0B7D0000040000415C
-:104DF00008990100CF81004081B20000410100A666
-:104E000086B00100500C004386980100C281A24385
-:104E1000846C00000000004121B30100CF810040FC
-:104E200081B20000410100A686B00100600C004381
-:104E300086980100CF81A243846C000000000042EC
-:104E400021B30100188000A682B001002882004032
-:104E500081320100FFFF004182880100007700419C
-:104E6000828C010001020041829801002000004173
-:104E700082DC01001800004182DC0100CD81A25ECD
-:104E80000B7D00000000004108B10100200000A6D9
-:104E900082B00100D081A25E0B7D00004013004172
-:104EA00008990100D8812243216F0000200000A64C
-:104EB00082B001001200004182DC0100D581A25EB7
-:104EC0000B7D00000004004108990100F3810040BF
-:104ED00081B20000200000A682B00100190000414C
-:104EE00082DC0100DA81A25E0B7D000000A000419F
-:104EF00008990100F381004081B2000000000044E5
-:104F000021B301000000004083B001000000005FF9
-:104F1000839001000000005E8390010000000057B4
-:104F20008390010000000041C2B101000C0100406B
-:104F3000813201000000005F838001000000004119
-:104F4000C2B101000C01004081320100200000A626
-:104F500082B001000400004182DC01002000004119
-:104F600008990100200000A682B001001100004154
-:104F700082DC0100EC81A25E0B7D0000010000419B
-:104F800008990100200000A682B00100EF81A25E16
-:104F90000B7D00004013004108990100010000A6AC
-:104FA00082B00100400000412E99010000008040C5
-:104FB00081B20100200000A680B00100000000CAFC
-:104FC00081940100F681A25E0B7D000022830040E7
-:104FD00008B10000C8142EBB85B00100F981A25EA3
-:104FE0000B7D00000000004087B0010008822243D2
-:104FF000216F000017822244216F0000118000A65B
-:1050000082B0010028820040813201001F82224AC2
-:10501000837C000000000040879001000382224D45
-:10502000837C000000000041879001000582224F30
-:10503000837C000000000043879001000782224E1D
-:10504000837C000000000042879001001F82004026
-:1050500081B20000018000A682B0010028820040D9
-:1050600081320100018000A682B001002882004048
-:10507000813201001F822242837C00000000004038
-:10508000879001001C8000A682B0010028820040A9
-:105090008132010012822245837C00000000004121
-:1050A0008790010014822244837C000000000043AA
-:1050B0008790010016822243837C0000000000429A
-:1050C000879001001F82004081B20000018000A68D
-:1050D00082B001002882004081320100018000A6D8
-:1050E00082B0010028820040813201001F822242EA
-:1050F000837C000000000040879001000000004316
-:10510000879001000000004187900100008000A608
-:1051100082B0010028820040813201002382224BAC
-:10512000837C0000000000408780010000000043F5
-:10513000E0B10100FF7F00A2A08B0100000000444D
-:10514000A5B30100B88000CAA73301004181004027
-:1051500081B200002000004182DC01002982A25EB1
-:105160000B7D00000000004108B101002B829F85EB
-:10517000823000000000804081B20100308214F7CC
-:10518000813000003082A249FD7F0000000000480D
-:10519000FD930100338215F8811400003382A24A86
-:1051A000FD7F000000000048FD9301003582A2C889
-:1051B000813200004000004080DC0100001000400F
-:1051C00080DC010000000040EFB301003782424064
-:1051D000F13300004381004068970000228300BB48
-:1051E0006BB30000228300BBB1B3000022830040F8
-:1051F00081B20000000300408198010000000040DF
-:1052000018B101008000004083980100001900409F
-:10521000459901000000424081B20100000043FFB7
-:10522000F1B10100000000FFF1B1010000000041F8
-:1052300081C001000000004018B101004082A2417D
-:1052400083500000001600404599010000190040FD
-:10525000439901000000004743C1010000000040E5
-:1052600083B00100000000F380B001000000005B8B
-:1052700081D001000000004180D00100000000400A
-:10528000F6B101000000005B43C1010000000041D5
-:1052900083C001004A82A254836C000000000040D9
-:1052A000F7B101000000004183C001005182A20655
-:1052B000836C00000000804081B2010000160040B5
-:1052C0004399010080162E0683B00100360000FBD2
-:1052D000F6A901005782A24183500000220000403D
-:1052E00083980100000000FBF6B101005A82A24140
-:1052F000835000006200004095980100DC9F004050
-:105300008132010000162D0683B001008016004096
-:10531000459901005C0000FBF6A901006082A241F2
-:105320008350000000000070F9B10100000000711E
-:10533000F9B1010000000072F9B101000000007332
-:10534000F9B1010000000074F9B1010054000040FF
-:1053500095980100DC9F0040813201000000007040
-:1053600095B001006C822270B56F00000000804192
-:1053700097B001000000804097B00100C480A242B5
-:10538000976F0000B6030040A199010000002F4272
-:1053900099B3010078822244816C00008082224807
-:1053A000816C00007A82224C816C00008582225040
-:1053B000816C000086822254816C00008882225811
-:1053C000816C00008D82225C816C000050010040E5
-:1053D00081B20000000000BC09B00100228300CAB5
-:1053E00001B000000000004003B0010000000041D7
-:1053F000F38301007E82A242056C000000000041A0
-:1054000005B00100228322CA07140000228300464F
-:10541000F393000022832043956F0000228380CA0B
-:10542000053000002283220180300000C480A248A1
-:10543000DB7D0000228300CBDB910000570100BC24
-:10544000ABB30000000000BCB1B30100228300CA6E
-:10545000CFB30000FF0000CA818801002283A24070
-:10546000747D000060002040609901008A82A8B12C
-:10547000823000008982004081B20000228300CA8D
-:1054800079B300000000004E81B00100000000432D
-:10549000CB8301000000454081B201009082A2410F
-:1054A000815000000000454081B2010000004540ED
-:1054B00081B201009B829182823000000000008A4C
-:1054C00080B00100AE9F004080CE01009982A640CE
-:1054D000813200009B82564081B20000B60300403A
-:1054E000A19901000000005307900100B60300409D
-:1054F000A19901000000005207900100D89F0041CF
-:105500008BB300000000004E81B00100000000429B
-:10551000CD8301000000464081B20100A082A2417B
-:10552000815000000000464081B20100000046406A
-:1055300081B20100AB8291818230000000000089BD
-:1055400080B00100AE9F004080CE0100A982A6403D
-:1055500081320000AB82554081B20000B6030040AA
-:10556000A19901000000005207900100B60300401D
-:10557000A19901000000005307900100D89F00414D
-:105580008BB30000B1030040A1990100C4142F4067
-:1055900099B301005701004049B10000A0942E4387
-:1055A00097B0010000000040F1B10100B282A241B9
-:1055B0009750000050952040E1B10100AC942E437B
-:1055C00097B0010000000040F1B10100B682A24195
-:1055D000975000000000804081B20100AE030040FF
-:1055E000A39901000000004081B001006015004057
-:1055F000859801000800004040E4010000000059C7
-:10560000419401000000005041E001000000004210
-:10561000409401000000005741900100000000414B
-:1056200081C001000000A342816C01000000004124
-:10563000A3C10100BC82A042816C0000BC8200506A
-:1056400085C000000183A241017D0000CF82225865
-:10565000737D00007800004061990100C782A8B105
-:105660009C300000300038459DE001000400A25F3E
-:105670001F7C00000400225E1F7C000000C000A60A
-:105680001EA401000100000E10C90000CF8233C427
-:1056900081300000D282A1AD9D200000C68213405F
-:1056A00081B200000000134E5A83010030003845DB
-:1056B0009DE001000400A25F1F7C00000400A25EC8
-:1056C0001F7C00000400A240056C0000DD8222ABBC
-:1056D00080040000DB82A240017D0000DD82225FA9
-:1056E000577D00001288005F1FB40000DD82225E3B
-:1056F000577D00008088005F1FB40000E3822254C1
-:10570000737D00007400004061990100DD82A8B142
-:10571000003000000000005F1FB40100F784A25FAA
-:10572000017C00009587004081B20000E582A25F05
-:1057300059270000E782A25C737D0000EE82A25E22
-:10574000737D0000FA82225C737D0000FB8237408B
-:10575000813200007C00004061990100E882A8B11C
-:10576000363000007C00004061990100EA82A8B157
-:10577000003000001F000000028801003785175F1D
-:105780001FB40000FB823440813200007E000040E4
-:1057900061990100EF82A8B112300000F782522116
-:1057A00013040000000014412FC301000000005F3B
-:1057B0001FB40100FF3F0009008C010000000043FE
-:1057C00001F001004F83003413840000FF3F1409EF
-:1057D000008C01000000005F1FB40100C48300437F
-:1057E00001F000000000004081B20100FB82334064
-:1057F000813200000400A24E5A7F00000700004ED4
-:1058000080E401000039004080C801000400A2408B
-:10581000066C0000C682134E5A930000E787A24828
-:10582000FD7F0000058302E681320000068383E5E8
-:10583000813200008E82004297B300009E820042B7
-:1058400097B3000009832246F37F00000C83A24136
-:10585000F37F0000C6800042973301000C8322448E
-:10586000F37F00000C83A241F37F0000C680006F2D
-:10587000973301000400A2AC803200001183225A49
-:10588000737D00007A000040619901000E83A8B189
-:105890007E310000010000CF11C900001783A24033
-:1058A000937F000017832244937F0000138342A557
-:1058B000803000001683A240937F000038831A4096
-:1058C0009393000000001A4081B20100DF80A240E3
-:1058D000737D0000E2872244216F0000D9872240B7
-:1058E000657D00000005A25B737D00000400A249F5
-:1058F000337D000021832248337D0000FF010099A1
-:1059000080D801000000005081E00100A8982F40DD
-:1059100033B1010000000040E0C1010001830040FC
-:1059200081B20000C68200408BB300000400A25E7A
-:105930001F7C00000400225F1F7C00000000005E4E
-:105940001F900100C682005F1F8000000400A25E5D
-:105950001F7C00000400225F1F7C00000000005E2E
-:105960001F9001000000005F1F8001000000005830
-:1059700061B101000000004E62B10100C682284002
-:10598000813200002C83004081B200000000004002
-:105990000FB001000400A25E1F7C00000400225F23
-:1059A0001F7C0000328333401F3000000400A24EF1
-:1059B0005A7F00000700004E80E4010000390040DB
-:1059C00080C801000400A240066C0000C682134E8D
-:1059D0005A9300003A83A0CE815000004D83A0CDA1
-:1059E000816C0000000000A59CB30100000000B124
-:1059F00081B001004D8322B58114000080152F4035
-:105A000049B101003E83424081320000000060B491
-:105A100065970100D0152E4069B3010000001A44BB
-:105A20009383010004002240E16D00001A0000A2EF
-:105A300080DC010000000044F1B10100000000B171
-:105A4000F1B10100000000B5F1B101000500004016
-:105A5000619901008000004062DD01004883A8A137
-:105A6000E0310000178300889EB300001783A24135
-:105A7000676F00001783006FDB9100004D83424089
-:105A80008132000017831A40938300000004004015
-:105A900089980100099900008A3001000400A25A87
-:105AA000017C000004002240016C00000099000904
-:105AB00046C901003F0000F30C8801005C83A64248
-:105AC000136000009B9600950330010057836140EE
-:105AD0008132000075000040619901005883A8B12F
-:105AE0000C300000A9967110943001005D830058BD
-:105AF0001F9000008D9600950330010023830088DD
-:105B00001CB0000000002D0348B1010004002DF07E
-:105B10002EB0010080040017968801000400A64002
-:105B2000813200004AC1001796D801000400A64047
-:105B300081320000EE070040979801006883234BF4
-:105B4000E46D00006883224BFD7F000000000040F0
-:105B50001F90010022002F4081B201006B83831748
-:105B60008032000026000040479901006D838517B0
-:105B7000803200000000004847C1010073832255B5
-:105B80002F7C00000000004243D101000F0000FA0A
-:105B9000968801000000004297E0010000000042EA
-:105BA00097D001007483004B44C10000120000A292
-:105BB00044C90100280000F602CC01000A0000A13F
-:105BC00042C90100000000F816B00100000028F0F2
-:105BD00010B00100000000F01AB00100000000A2A7
-:105BE0002AB00100C0283C460DE0010000002D4411
-:105BF00095B001008083A2F80E300000908322410E
-:105C00009550000000002D5049C101007C830040E8
-:105C100081B200007D83A2F8166C00007D83A2F89B
-:105C2000106C00007D83A2F01A6C00008E83225855
-:105C30001F7C000000993F4213F0010085836540FE
-:105C4000813200008983A2F3740600000000000680
-:105C5000E69501008E83754081B2000000000006C9
-:105C600096B001003F0075F30C880100000000555C
-:105C700061B101000000004B62B101008C83A840BB
-:105C8000813200008E836740813200009683774125
-:105C90002DC30000948322581F7C00000000005593
-:105CA00061B101000000000662B101009283A840CA
-:105CB000813200009483674081320000D5837741B0
-:105CC0002DC30000030000071AF401001895000717
-:105CD00016300100A8832241816C00009C8322427F
-:105CE000816C0000238300881CB00000A783225F22
-:105CF0000F7C00004E96005F01100100A28322403D
-:105D0000956C00000480000342C90100000000F20D
-:105D100002B00100A595005295300100AC95004BF2
-:105D200002B000000000005F0F800100010400408D
-:105D300089980100099900008A300100B496000991
-:105D400096300100F08700400FB00000B783A25AE0
-:105D50001F7C00000400A25A1F7C000000B5000D4B
-:105D600042C901000400220BE67D000000B7000DCF
-:105D700042C901000400220BE67D0000709400403F
-:105D800081320100B7832220856C0000B2839C0F12
-:105D900080320000238300881CB000008D95005CD9
-:105DA0001F000100C8970042613101002383008871
-:105DB0001CB00000900400079630010000002D0583
-:105DC00048B101000400A24BE17D00000400A25C88
-:105DD0001F7C000000002D0548B10100BB8382F04C
-:105DE000183000006C8900458FB00000282000A604
-:105DF00096B00100C18322179604000034040040CD
-:105E000089980100099900008A3001005B97004BD6
-:105E1000953001006C89004B8FB000005D96000347
-:105E200048310100AF930040813001006C8900408F
-:105E300081B20000000000400FB0010000040040EB
-:105E400089980100099900008A300100040022406D
-:105E5000016C000000002E1048B1010000006850E5
-:105E600003B0010000000003F0B101004000000099
-:105E7000E0C9010000002E5049C10100000000509F
-:105E8000F1B1010000000003F0B101000000004288
-:105E900061B101002000001062DD0100D083A84044
-:105EA000813200001000001062C90100D283A800F6
-:105EB000E0310000238300881CB0000000002D03A7
-:105EC00048B10100000000400FB00100000000F8E0
-:105ED0002EB00100000000F202B0010000000040FE
-:105EE00017B00100004100A696B00100EE072E4752
-:105EF00097900100E883221796040000E683224B66
-:105F0000FD7F0000E68323A2026C0000A5950052ED
-:105F10009530010004002241975000000C002D0034
-:105F200012B00100000000F000B001000000005CB1
-:105F300001800100AC95004B02B000000000000998
-:105F400000B001000000005003B001000584005CB7
-:105F500017900000FA8322432F7C000000000045C8
-:105F60001F900100F383225F2F7C000000002E10A1
-:105F700048B1010000000058F1B101001000000319
-:105F8000F0C9010010000000E0C90100EF83624287
-:105F9000613100000000001062B10100F083A840F0
-:105FA00081320000238372881CB0000020002D0382
-:105FB00048B10100FF0F00F680880100F783A2A618
-:105FC000816C0000FA8300F23AB00000F484A24B26
-:105FD000FD7F0000C9940040813201000688004026
-:105FE00081B200000584224A2F7C000005842248EB
-:105FF0002F7C00000A002D0348B101003F0000F291
-:10600000868801001F0000438488010005000043CA
-:1060100080F4010098943D4281E001000584A24291
-:10602000E07D0000F484A24BFD7F0000C994004095
-:10603000813201000688004081B200000204004065
-:1060400089980100099900008A300100078469409D
-:1060500081320000000000A309B001000000794176
-:1060600047C301000400A0A1096C00000E8422A116
-:10607000096C0000278300881CB000000A8400031C
-:1060800048B100004884A392036C00002B980040A4
-:10609000953001000000004143C3010000000016DC
-:1060A00080B2010006882708803200001584225C37
-:1060B000177C0000168400002AB0000012000000C7
-:1060C0002AC801000200000880C801001A84A24307
-:1060D0002F7C00005E970040813201003684005E14
-:1060E00017900000040000018CCC01005E97004C6A
-:1060F0000330010000002E4602B001001000001025
-:1061000048C901000C000001F0CD01002C00004046
-:10611000F0C9010000000016F0B1010010000015E8
-:10612000E0C901000000004361B10100A00000A42B
-:1061300062DD01002384A854171000003684005E3D
-:1061400017900000120000002AC801003584224385
-:106150002F7C0000040000018CCC01000000004CEA
-:1061600003B001007F9700436131010000002E461B
-:1061700002B001001000001048C901000C0000012D
-:10618000F0CD01000C000009F0C90100000000186A
-:10619000F0B1010010000015E0C90100000000434B
-:1061A00061B10100A00000A462DD01003684285422
-:1061B000171000003284004081B200007F97004336
-:1061C00061310100388422502F7C0000000000560D
-:1061D0001790010007000017988801003B84A24136
-:1061E000996C00000000005517900100000000436A
-:1061F00061B101004000001062DD01003C84A84054
-:1062000081320000238300881CB0000066970040A4
-:1062100081320100438422432F7C0000168000035A
-:1062200044C901000000001DE4B101000097005EB8
-:10623000051001004684A25F2F7C000086930001B8
-:1062400038430100C99400408132010006880040B3
-:1062500081B200004A84A24BFD7F0000F18400411E
-:1062600043C300000000004027B0010000000040D0
-:106270002DB001000000004011B001004D84350137
-:10628000863000006D00004061990100568428B1FD
-:10629000303000004E84224D757D00000000001655
-:1062A00080B20100DD84A740116C000000000041B5
-:1062B00043C301000400A240276C0000F0840040AA
-:1062C00081B200006D000040619901005684A8B1C0
-:1062D000123000000000001680B201006084A74068
-:1062E000116C00000000004143C3010000000009E0
-:1062F00010B00100000000182CB00100DE070043C0
-:1063000080CE01004E84AA408132000065840040A6
-:1063100081B2000040003E4327E001000000000978
-:10632000F0B1010000000018E0B1010000000041E0
-:1063300027C001004E84A30B8750000000001540C9
-:106340001BB001000000004023B001000400A203C4
-:10635000486D0000120000002AC8010040002D40D6
-:1063600039B001006F84A240276C000022000008B1
-:1063700012C801000400A216306C0000DE070040C5
-:10638000259801007284004081B20000000000F8EE
-:1063900012B00100000000F030B001000000000B5E
-:1063A00025B001000000001032B0010014002001EF
-:1063B000E0B10100EE070040379801007784230127
-:1063C000366C00000000000136B00100828482417A
-:1063D000234000002080001042C901007E8422403A
-:1063E000E36D00000000004361B1010040000010B7
-:1063F00062DD01007B84A840813200002383008895
-:106400001CB00000F3940043233001000000001092
-:1064100032B001000000004123B001000000000381
-:1064200048B101000080001944C90100938422454D
-:106430001F7C00000400A241236C00000400A20B9A
-:10644000256C00000000004CF1B1010000000009C3
-:10645000F0B1010000000018F0B10100000000439D
-:1064600061B101002000001962DD01008A84A815D5
-:10647000E03100000000005003D001000000005097
-:1064800033C001000000004C25D001000C002D4C51
-:1064900013C001000000005037D001000000005080
-:1064A0002BC00100778400451F8000009584A31253
-:1064B000366C00009684681B28B00000000068124B
-:1064C00028B0010000000009F0B101000000001830
-:1064D000F0B101000000004361B10100200000198B
-:1064E00062DD01009984A815E0310000C184221406
-:1064F000025000000000005033C0010000000014F2
-:1065000024D001000C002D1412C00100B984A21483
-:1065100036500000A984225C1F7C000030800010EF
-:1065200042C90100A7842240E36D00000000004240
-:1065300061B101004000001062DD0100A484A840A8
-:1065400081320000238300881CB00000000000039B
-:1065500048B101000C002D5C1F800100100000F00C
-:106560002AC801000000005C2B80010004002250BA
-:106570002B6C0000F007004037980100AF84230126
-:10658000366C00000000000136B00100BA84221B06
-:10659000026C00003000001048C9010000002E5CB1
-:1065A0001F90010000000050F1B101000000000345
-:1065B000F0B10100FF070015E08D0100000000426E
-:1065C00061B10100A00000A462DD0100B684A84012
-:1065D00081320000BA84000348B1000000000014BA
-:1065E0002AC001007784A240256C00000000004111
-:1065F00039C0010004002013386C000040003D4306
-:1066000039E001000000000B25B00100000000F897
-:1066100012B00100778400F030B000000400A25CEA
-:106620001F7C00000080001942C90100C88422407C
-:10663000E36D00000000004361B10100400000195B
-:1066400062DD0100C584A8408132000023830088F8
-:106650001CB00000F39400402B30010018002E0302
-:1066600048B10100CC8422502F7C0000000000566D
-:10667000179001000700001798880100CF84A241FD
-:10668000996C00000000005517900100D28422434D
-:106690002F7C000000000054179001001600201D00
-:1066A000E4B10100D484A340276C0000D684605F6D
-:1066B000179000000084000B16DC0100000060133E
-:1066C000169401000097005E051001000400A2402E
-:1066D0000F6C00000688A25F2F7C0000148000036E
-:1066E00042C90100000000F202B0010086930001DF
-:1066F000384301000688004081B200000400A20374
-:10670000486D00000400224D757D0000000000402F
-:1067100083B001000000004D61B1010000000016CF
-:1067200080B2010004002740116C00000000001638
-:1067300062B10100E384A84081320000000000083B
-:1067400062B10100E584A84081320000F084221388
-:10675000826C000040003D4383E00100000000F82F
-:1067600010B00100000000F02CB001000000001685
-:1067700062B10100EB84A8408132000000000008F3
-:1067800062B10100ED84A84081320000E78400413D
-:1067900083C000000000154081B20100008200A605
-:1067A00004B00100A0980040479901003005004165
-:1067B00089300100A595005295300100AC95004B41
-:1067C00002B00000068800400FB000000000005F2B
-:1067D00001800100100000000EF4010004002640BA
-:1067E000813200003F0000000088010005040040E5
-:1067F00089980100099900008A3001000300000710
-:106800001AF401001895000716300100088522418E
-:10681000816C000003852242816C00002383008884
-:106820001CB000000785225F0F7C00000000005FA5
-:106830000F800100060400408998010009990000BA
-:106840008A300100F08700400FB000001785A25A7F
-:106850001F7C00000400A25A1F7C000000B5000D40
-:1068600042C901000400220BE67D000000B7000DC4
-:1068700042C901000400220BE67D00007094004034
-:106880008132010017852220856C000012859C0F43
-:1068900080320000238300881CB000008D95005CCE
-:1068A0001F000100C8970042613101002383008866
-:1068B0001CB00000900400079630010000002D0578
-:1068C00048B101000400A24BE17D000000002D054D
-:1068D00048B10100000000F018B001001C85223A08
-:1068E000016C0000000000008EB001006C890040C7
-:1068F00001B000000000004081B201002E002D0513
-:1069000048B101002185A240E76D00000A00004067
-:106910008F9801006C89004001B000001D94004078
-:106920008132010004002200803200003504004062
-:1069300089980100099900008A3001008D96009520
-:1069400003300100238300881CB0000000002D03E9
-:1069500048B1010022002DF02EB0010004001F17E5
-:1069600080320000282000A696B001002E85221754
-:10697000960400005B97004B953001006C89004C39
-:106980008FB0000030858317803200000000004483
-:1069900043C10100328585178032000000000048A5
-:1069A00043C10100280000F602CC0100120000A142
-:1069B0002AC801005D96004081320100AF9300417A
-:1069C000813001006C89004081B2000000000001AC
-:1069D00000D0010000002E1048B101002800004046
-:1069E000F199010000000003F0B101000000000077
-:1069F000F0B101003C8564476131000000000010E7
-:106A000062B101003D85A81BE0310000238374883A
-:106A10001CB000000000004503E001000400A005D8
-:106A2000036C00000400A309036C000008002D03A0
-:106A300048B101006E8501FB08300000D88587FB56
-:106A400022300000000000FA0EB00100000000F843
-:106A500014B00100030000071AF4010018950007A4
-:106A6000163001005F852241816C00004E85224274
-:106A7000816C0000238300881CB000005E85225FCB
-:106A80000F7C0000380000047E8901005485A65F59
-:106A90000F00000031940040053001000A0400405E
-:106AA00089980100099900008A3001005B85004047
-:106AB00081B20000130000408798010000002D0300
-:106AC00048B101000C002DF082B00100000000F080
-:106AD00084B001002C9600400530010008040040FD
-:106AE00089980100099900008A3001000400A25C25
-:106AF0001F7C00000000005C1F900100F087004038
-:106B00000FB000006C85A25A1F7C00000400A25A3E
-:106B10001F7C000000B5000D42C901000400220BDB
-:106B2000E67D000000B7000D42C901000400220B01
-:106B3000E67D000070940040813201006C852220C7
-:106B4000856C000069859C0F8032000023830088DB
-:106B50001CB000008D95005C1F000100C89700422A
-:106B600061310100238300881CB0000090040007FD
-:106B70009630010000002D0548B10100000000F032
-:106B800018B001007085210480200000718500404C
-:106B900010C90000A488004B81B000009F8500430D
-:106BA00081B00000A38500FB22B00000A488004152
-:106BB00081B000006C89004E8FB000009485005AAF
-:106BC0008FB00000798500478FB00000A488005383
-:106BD00081B00000A488005681B0000032002D056D
-:106BE00048B101000704004089980100099900009C
-:106BF0008A3001003C040040899801000999000A8C
-:106C00008A3001003D0400408998010018000011FD
-:106C10008AE40100099900F28A1401000000004092
-:106C200081B201006C89A00AE46D00008785A24151
-:106C3000197C00008685220A803200006C8900538E
-:106C40008FB000006C8900548FB000009085220A3C
-:106C5000803200008A85A20AE46D00006C89005D24
-:106C60008FB00000000000F280B001000000000AB8
-:106C700080D001008E85A091816C00006C89005E3F
-:106C80008FB00000250000408F9801006C89004003
-:106C900081B2000092852091E56D00006C8900545E
-:106CA0008FB00000210000408F9801006C890040E7
-:106CB00081B2000032002D0548B1010007040040F8
-:106CC00089980100099900008A3001003C040040C5
-:106CD000899801000999000A8A3001003D040040AA
-:106CE00089980100099900F28A30010000000040F3
-:106CF00081B201006C89A00AE46D0000240000400C
-:106D00008F9801006C89004081B2000037002D058A
-:106D100048B10100040000F382F40100A488A042FD
-:106D2000836C0000A488005481B00000000000F2D1
-:106D30000EB00100040023400F6C0000040020AAE4
-:106D40000F6C0000090400408998010009990000B7
-:106D50008A300100030000071AF4010000B5000D9D
-:106D600042C901000700000716880100B185220B07
-:106D7000E67D00000A000040879801007F980040EF
-:106D80008132010004001C0F80320000000000402E
-:106D90000FB00100F087005C1F900000C3852250F7
-:106DA000FD7F0000BE85A254FD7F0000B685225500
-:106DB000FD7F00008200004087980100AD85004003
-:106DC00081B2000004002253FD7F00001480000304
-:106DD00042C90100000000F096B001001000004B15
-:106DE00080F401000CBC004087980100BE8522435E
-:106DF000806C0000FFFF004B80880100AD85A2433E
-:106E0000806C00007C96004047990100BF85464099
-:106E100081320000C285A0F0306F0000B4851E40B2
-:106E200081B2000000001E4131C301007F94004088
-:106E300025300100C7859C0F803200002383008825
-:106E40001CB000008D95005C1F0001001480000341
-:106E500042C901000400225A1F7C0000000000F01B
-:106E600096B0010000002F0548B101001000000796
-:106E700018E401000008000CE099010090040007EC
-:106E80009630010000B5000D46C90100CF853040A5
-:106E9000813200000400A20BE67D00000000000B20
-:106EA000E6910100000200A146C901000400A20B06
-:106EB000E67D00000000000BE691010004002E05B5
-:106EC00048B1010000001040E1B10100A488004079
-:106ED00081B00000000000FB28B00100000000FBB2
-:106EE00086B00100000000F814B00100E3852246DE
-:106EF000237C000004002240876C0000DF852240D4
-:106F0000877C0000000000481F900100E1852241BD
-:106F1000877C0000000000471F900100E3852242AB
-:106F2000877C0000000000451F9001000400224003
-:106F3000097C0000E485661B2C300000000000A0E6
-:106F400013B001000000764141C301001686239270
-:106F5000156C00001686A2451F7C00001C86224B83
-:106F6000FD7F0000170000D0A2C901000000004012
-:106F700027B001000200000A24C80100BF940040AD
-:106F80000F3001001486220840300000000000414C
-:106F9000A3C10100F007001224CC0100ED85AA4135
-:106FA000274000000400A349276C000001000013E3
-:106FB00080CC01000E8626402330000000000040F7
-:106FC00083B001006000000384C8010010000010BD
-:106FD00048CD0100170000D0A2C90100FB85A240E6
-:106FE000836C00000786004183B0000000800042EF
-:106FF00044990100000068213896010000002E50DD
-:1070000049C101000086A244236C00003000000347
-:1070100048C9010000000044F1B101000C0000204B
-:10702000F0C901000000004461B10100A00000A40B
-:1070300062DD01000386A842E03100000000004448
-:1070400085C001000000004123C001000000004194
-:10705000A3C10100F985A241815000000E862240A3
-:10706000236C00000000004461B1010040000010EA
-:1070700062DD01000B86A840813200002383008876
-:107080001CB000000B040040899801000999000021
-:107090008A3001000000000348B10100EE07004003
-:1070A00025980100170000D02AC801002786001784
-:1070B00010B000000A970040813201001C86004099
-:1070C00081B20000BF940092253001000000004012
-:1070D00031B001000B0400408998010009990000BB
-:1070E0008A3001001C8622082E30000027860041CD
-:1070F00027B00000808000A604B001000600004018
-:10710000879801007F98000A8C30010004001C0F52
-:1071100080320000000000400FB001000000005C61
-:107120001F9001000400A09F136C00002686229F80
-:10713000136C0000020000881CCC01002783004073
-:1071400081B20000F08700413FC300000000004012
-:107150000FB001002800000180CE01003B862A40CC
-:10716000813000000080001044C901004000004050
-:10717000819801003086A2481F7C00003086A2471B
-:107180001F7C00003086A307036C000080000040D5
-:10719000819801003386A340026C000028000001A2
-:1071A000F0CD0100358600400FB0000028000040FF
-:1071B000F0CD0100040000400ECC010028000003C7
-:1071C000F0C9010028000000F0C90100000000160D
-:1071D000E0B101000000004761B101002000001093
-:1071E00062DD01003986A85C1F1000000400220A3D
-:1071F000803200000400A203486D0000000000403F
-:1072000043990100000000F008B00100A0012D40EA
-:1072100000C001001C87220F420500004E869C0F13
-:10722000803200000000005C1F8001000080001020
-:1072300042C9010049862240E36D0000000000477A
-:1072400061B101004000001062DD01004686A840E7
-:1072500081320000238300881CB000004E86220784
-:10726000803200000000000342B10100000000076E
-:1072700042C10100008000A1469901000000005FAA
-:10728000E1910100C006A2451F7C00001000000330
-:1072900048C9010000002D5429C00100000000F879
-:1072A00018B00100000000F804B00100000000F870
-:1072B0000EB0010004002640813200000400A25FED
-:1072C0000F7C00003E00001480CE01000400AA40A4
-:1072D00081320000420000030AC801000C0000A433
-:1072E0000CC8010016950040813201000000001416
-:1072F00002B001000000001424D0010000000014BE
-:1073000010C001001200000810C801000000004079
-:1073100023B00100FE7F000544C901000400A2A2C1
-:10732000860600000000000AE4B101007C8622010C
-:107330008032000000003C4423E0010000002EA445
-:1073400080B001000000001048C101006986A30759
-:10735000026C00006A8668011AB00000000068072D
-:107360001AB001000000000D02D00100000000056D
-:10737000F0B101000000000CF0B1010000000002BB
-:10738000E0B101000000000D0AC001007686224035
-:10739000036C000076862242236C0000000000414E
-:1073A00023C001000000004761B10100A00000A45B
-:1073B00062DD01009C862840813200007386004017
-:1073C00081B200000000001080C0010000000047F2
-:1073D00061B101000000004062B101007886A84060
-:1073E00023300000238300881CB000009C860040EE
-:1073F00081B2000000003C4423E00100000000A432
-:1074000086B0010000002E1048C101008186A31241
-:107410000E6C0000828660071AB000000000601247
-:107420001AB001000000680D16940100FFFF000B68
-:1074300016D801001B990008983001000000680868
-:107440003E9601000000000CF0B1010000000002B7
-:10745000E0B101000000001086C0010000000046FD
-:1074600061B101002000004362DD01008A86A85C52
-:107470001F100000BC86220D146C00009086220DA7
-:10748000246C00000000000D10C001009586000D66
-:1074900024D000000400224BFD7F000000000041CA
-:1074A0002BC0010000000015A2B101001000002057
-:1074B00010C80100F007004025980100978622427D
-:1074C000236C00009C86004123C0000000000046A1
-:1074D00061B101004000001062DD01009886A85CE7
-:1074E0001F000000238300881CB000000000004043
-:1074F00023B00100BC86220D14500000BB86A20DF3
-:107500000E500000A88622461F7C000000000046A6
-:107510001F8001003080001042C90100A686224071
-:10752000E36D00000000004761B101004000001061
-:1075300062DD0100A386A840813200002383008819
-:107540001CB0000020800003469901000000005F8D
-:10755000E191010000002D0648B10100000000F893
-:1075600018B00100000000F804B00100040022F08F
-:107570000E300000AE86A25F0F7C00006386004CD8
-:107580000DC0000000002E5F0F80010063862307FE
-:10759000146C00000400A2461F7C000030000010A4
-:1075A00048C9010024000040F199010000000003D7
-:1075B000F0B1010000000000F0B101000000001671
-:1075C000F0B101002400000000C8010000000047E5
-:1075D00061B10100A00000A462DD0100B886A846E8
-:1075E0001F100000638600030CB000006386000DCE
-:1075F00018C0000004002E140AD00100120000057B
-:1076000048CD0100FE7F000542C901000400A2A48C
-:10761000860600000400A2A1860600000C002AF2E3
-:10762000E0B10100C4862240316C00000000601807
-:10763000389601001E00004043990100008100F6C9
-:1076400080CE0100C886A6408132000000000044C0
-:1076500043C10100CA86220BED6D0000080000A1A5
-:1076600042C90100020000A146C901000400A2A114
-:10767000860600000F0000FA948801000400A2456D
-:10768000956C00000200004A86E40100000000F64C
-:107690000EB00100D48622471F7C000004001F4367
-:1076A0000E500000D486A0460F40000000000041AC
-:1076B0000FC00100D88622481F7C00000000004057
-:1076C00091B0010004000FA242310000DB860040AF
-:1076D00089B000000C0000A242C901000000004374
-:1076E00089B001000000004395D00100000000FCBB
-:1076F00082B00100DE86A041904000000000004101
-:1077000091C00100E38622471F7C0000E386A0436E
-:10771000896C0000E3862045896C0000E386A04167
-:107720000E400000000000410FC0010000000041B9
-:1077300089C00100DB86A24195500000F0862248F6
-:107740001F7C00001000004892F40100FFFF004879
-:1077500090880100EA8690489240000000000041B5
-:1077600093C001000A0000A244C901000000662085
-:1077700093A401000A00004380CC0100000000A295
-:1077800080C001000400A240426D00000400A2A1DC
-:10779000860600000400A2461F7C00001B9900170B
-:1077A00098300100FF0700177E8901000400A64001
-:1077B000813200003080001044C901001200001422
-:1077C000F0C9010000000017F0B10100120000052F
-:1077D000E0CD01003000001080C80100000000442E
-:1077E00061B101002000004062DD0100FA86A8407E
-:1077F000813200000587225C1F7C000000003C44B1
-:1078000023E0010000002D1048C101000487224040
-:10781000E36D00000000004661B10100400000106F
-:1078200062DD01000187A8408132000023830088C7
-:107830001CB000000000005C1F8001000887A24708
-:107840001F7C00000C9500408132010088870017E2
-:1078500010B00000139500408132010000002F039A
-:1078600048B101000C87A00716400000000000414D
-:1078700017C001000000000BE4B10100000000503F
-:1078800017F00100108790F2164000000000004140
-:1078900017C001000000662017A4010010000014AA
-:1078A0002AC80100000000502BE00100000000F297
-:1078B0002A9401003080001042C901001A8722403A
-:1078C000E36D00000000004461B1010040000010C1
-:1078D00062DD01001787A840813200002383008801
-:1078E0001CB000000080001710DC010088870040F9
-:1078F00081B2000024879C0F803200000000005CF1
-:107900001F8001000080001042C90100248722402E
-:10791000E36D00000000004761B10100400000106D
-:1079200062DD01002187A8408132000023830088A6
-:107930001CB00000298722078032000000000003ED
-:1079400042B101000000000742C10100008000A117
-:10795000469901000000005FE191010004002E0340
-:1079600048B101000000000AE0B101002E8722406A
-:10797000316C00000C0000404599010000006018C7
-:107980003896010000002E1048B1010000000050A0
-:10799000F1B1010000000008F0B101000000000397
-:1079A000E0B101000000004461B1010000000010DE
-:1079B00062B101003387A840233000002383008890
-:1079C0001CB0000000002D5211C001001000000387
-:1079D00048C90100000000F818B00100000000F8DC
-:1079E00004B00100000000F80EB001000C0000A47B
-:1079F0000CC8010004002240156C000000003C444B
-:107A000023E00100000000A486B0010000002E1059
-:107A100048C101004287A3120E6C0000438768072B
-:107A20001AB00000000068121AB001001B9900088B
-:107A3000983001000000004081B2010000000010F9
-:107A400086C00100000068083E9601000000000C9E
-:107A5000F0B1010000000002E0B1010000000046AA
-:107A600061B101002000004362DD01004A87A85C8B
-:107A70001F1000007C87220D146C00005087220D1F
-:107A8000246C00000000000D10C001005587000D9F
-:107A900024D000000400224BFD7F000000000041C4
-:107AA0002BC0010000000015A2B101001000002051
-:107AB00010C80100F00700402598010057872242B6
-:107AC000236C00005C87004123C0000000000046DA
-:107AD00061B101004000001062DD01005887A85C20
-:107AE0001F000000238300881CB00000000000403D
-:107AF00023B001000400220D145000007B87A20D6A
-:107B00000E500000688722461F7C000000000046DF
-:107B10001F8001003080001042C9010066872240AA
-:107B2000E36D00000000004761B10100400000105B
-:107B300062DD01006387A840813200002383008852
-:107B40001CB0000020800003469901000000005F87
-:107B5000E191010000002D0648B10100000000F88D
-:107B600018B00100000000F804B00100040022F089
-:107B70000E3000006E87A25F0F7C00003C87004C37
-:107B80000DC0000000002E5F0F8001003C8723071E
-:107B9000146C00000400A2461F7C0000300000109E
-:107BA00048C9010024000040F199010000000003D1
-:107BB000F0B1010000000000F0B10100000000166B
-:107BC000F0B101002400000000C8010000000047DF
-:107BD00061B10100A00000A462DD01007887A84621
-:107BE0001F1000003C8700030CB000003C87000D14
-:107BF00018C000000400A2461F7C00008687225C9B
-:107C00001F7C00000000005C1F80010000003C445D
-:107C100023E0010000002D1048C1010086872240AA
-:107C2000E36D00000000004661B10100400000105B
-:107C300062DD01008387A840813200002383008831
-:107C40001CB000000000001710B001008887004041
-:107C50002BB00000008000034499010000000004E4
-:107C6000E0B1010004002640813200000400A09F22
-:107C7000136C00008F87229F136C000002000088A5
-:107C80001CCC01002783004081B200009498004181
-:107C90003F430100000000408DB0010000000040A3
-:107CA00005B001007F9800400F3001000400A25C85
-:107CB0001F7C00000688005C1F9000001000000080
-:107CC0000EF4010004002640813200000000003A5A
-:107CD000018401009B872250016C00000D040040CC
-:107CE00089980100099900008A300100030000070B
-:107CF0001AF401001895000716300100A6872241EA
-:107D0000816C0000A1872242816C000023830088DF
-:107D10001CB00000A587225F0F7C00000000005F00
-:107D20000F8001000E0400408998010009990000AD
-:107D30008A300100F08700400FB00000B387A25ADC
-:107D40001F7C00000400A25A1F7C000000B5000D3B
-:107D500042C901000400220BE67D000000B7000DBF
-:107D600042C901000400220BE67D0000709400402F
-:107D700081320100B3872220856C0000B0879C0F00
-:107D800080320000238300881CB000008D95005CC9
-:107D90001F000100C8970042613101002383008861
-:107DA0001CB00000900400079630010000002D0573
-:107DB00048B10100000000F018B001000000000010
-:107DC00080B00100A488A25F816C0000A8002D4350
-:107DD0001980010037002DF024B00100040000F3E9
-:107DE0008EF401000F0000F3908801000400A3430B
-:107DF0008F6C00000400A343916C0000C4872248EC
-:107E00008E6C0000360000404399010058003D434D
-:107E1000E7E10100C4871FF0246C0000C387234101
-:107E20008F6C0000A488004781B00000A48800483F
-:107E300081B000004000004043990100B0002DF0E7
-:107E400014B00100C987220A904000005F980040EA
-:107E500091300100A488A24080320000B0002D457E
-:107E600081B00100D58722F02C300000A3002D3016
-:107E700083B00100AC002DF382E00100CF87A34165
-:107E80002C6C00000000001682B0010098002DF05C
-:107E900082C0010088002DF082D00100000000F2B5
-:107EA00098E80100A488204C826C00007C002D41E1
-:107EB00098E80100A48820F0986C0000F087220A5E
-:107EC000803200004002000C7E890100F087A6404D
-:107ED00081320000A488004981B00000200000A683
-:107EE00080B00100DD872243216F00001380004035
-:107EF00080DC0100DE87004081B200001A80004073
-:107F000080DC0100DE87A25E0B7D000000000040E7
-:107F100008B10100E0879F8580320000E4870040BF
-:107F200081B200001A832240577D0000010000400A
-:107F300057990100E487424081320000000000446C
-:107F40009393010001831A5B69930000EA8722463C
-:107F5000F37F0000EA87A241F37F0000C680004261
-:107F600097330100040000CB81C80100ED87224057
-:107F7000F27F0000C680006F97330100EF87224038
-:107F8000737D0000E08000418BB30000E787004074
-:107F900081B20000F7879C0F803200000080001043
-:107FA00042C90100F7872240E36D00000000004550
-:107FB00061B101004000001062DD0100F487A840BB
-:107FC00081320000238300881CB000003494220218
-:107FD00080320000F88742408132000000000044F7
-:107FE0009393010034941A026897000002889C0F52
-:107FF000803200000080001042C901000288224047
-:10800000E36D00000000004561B101004000001078
-:1080100062DD0100FF87A8408132000023830088D1
-:108020001CB00000449422028032000003884240C9
-:1080300081320000000000449393010044941A022E
-:10804000689700000D889C0F8032000000800010AF
-:1080500042C901000D882240E36D00000000004588
-:1080600061B101004000001062DD01000A88A840F3
-:1080700081320000238300881CB000002F8322027D
-:10808000803200000E88424081320000000000442F
-:108090009393010000001A02689701002F830040AB
-:1080A00005B00000008000A656B1010056952F4093
-:1080B00005B001000400A240E76D0000B89429411A
-:1080C000E7B1010000000054EF930100000000F24E
-:1080D0000EB001000400A30C556F00002900004001
-:1080E0000D9801000900000712E40100000000A73C
-:1080F00013C00100030000071AF401000700000785
-:1081000016880100FFFF001034D8010000000003B2
-:10811000349401000000004023B00100201800400A
-:1081200011980100040020AA0F6C000000B5000D9A
-:1081300042C901004688220BE67D00002588604088
-:1081400081320000FFFF0007848901002E8805C2EC
-:1081500024300000580400408132010000002D0549
-:1081600048B10100638870F0183001001000000C65
-:1081700082F401000400A2410E6C00004688004019
-:1081800081B200000000704081B201003D88A0482B
-:10819000236C00000000005035D001000080001A60
-:1081A00042C9010037882240E36D00000000004210
-:1081B00061B101004000001A62DD01003488A8406E
-:1081C00081320000238300881CB00000209800400A
-:1081D00043990100638800F8183001003888A241F3
-:1081E00023500000FFFF001034D8010000000003FE
-:1081F00034940100201800401198010000002E1A4C
-:1082000048B1010000000044F1B101000000000885
-:10821000F0B101000000004261B101002000001A2D
-:1082200062DD01004188A809E03100000000004142
-:1082300023C001000000005035C0010000000044D0
-:1082400011C00100528822410D5000000000004181
-:108250000FC001004E88A0AA0F6C00000000004172
-:108260000FB001000900000712E40100000000A7A0
-:1082700013C00100000000401BB001002288004133
-:1082800017B000000002000912C8010022888341D3
-:10829000174000000000004017B001002288004194
-:1082A0001BC000005D882340236C000000000050CC
-:1082B00035D001000080001A42C901005A882240CE
-:1082C000E36D00000000004261B101004000001AAF
-:1082D00062DD01005788A8408132000023830088B6
-:1082E0001CB000002098004043990100638800F80A
-:1082F000183001005B88A2412350000000000041BB
-:108300000FC001006088A0AA0F6C000000000041AF
-:108310000FB00100B8942007E4B101005695204049
-:10832000E7B10100F08700400FB00000FFFF000C34
-:1083300080D801000400264081320000C002000CF9
-:108340007E8901007C882654613100006F88870C8B
-:10835000803200001F040040899801000999000C38
-:108360008A3001000000005461B101000F0000409C
-:10837000629901006F882840813200000400A254F5
-:10838000777D00006B88004081B20000778822462C
-:10839000197C00002A040040899801000999000C0A
-:1083A0008A3001000000005461B101000D0000405E
-:1083B000629901000000A84081B200000400A254AC
-:1083C000777D00007088004081B200007C882249DF
-:1083D000197C00000E000040629901000000A840D6
-:1083E00081B200000400A254777D0000778800402D
-:1083F00081B2000010000040629901000000A84016
-:1084000081B200000400A254777D00007C88004007
-:1084100081B2000030942F55F1930100004000A676
-:1084200056B101002F83A241E551000064000040D5
-:10843000E599010084884440813200008788A29336
-:10844000576F00000000004157C3010000001CAB43
-:1084500027B301002F832250FD7F00002F8322517C
-:10846000FD7F00002F83A2411D53000050460040B5
-:108470001D9B010038050040813201000E000048BC
-:10848000B2CB010010040040493101009388224022
-:10849000B56F00000E000048B2CB0100200400417F
-:1084A000B55301002F83004081B20000000000514D
-:1084B000FD83010040160040459901004005004041
-:1084C000493101001E000048B2CB010010040040F9
-:1084D00081320100000000DA91C001000400004870
-:1084E000B2CB010020040040B533010060162040EB
-:1084F000E5B1010055820040B53301000800004895
-:10850000B2CB0100FFFF004AB48B01002004004001
-:10851000813201000A000048B2CB01001000004A7D
-:10852000B4F7010020040040813201002F83004095
-:1085300081B200000400A205486D00000200004066
-:10854000439901000400A2F20E6C00000400A20294
-:10855000803200000500004043990100000000F354
-:1085600008B00100AE882250816C00000F0400406A
-:1085700089980100100000408AE401000999000474
-:108580008A14010004002048096C000004002057F0
-:10859000816C000004002040E6B1010003000040AF
-:1085A00096E401000000000496C00100B488004B6E
-:1085B00010C90000E48B004109B000000400002055
-:1085C0008FB00000040000208FB0000004000020E5
-:1085D0008FB00000040000208FB0000004000020D5
-:1085E0008FB00000040000208FB0000004000020C5
-:1085F0008FB00000040000208FB00000198C0041F3
-:1086000009B00000040000208FB00000040000202A
-:108610008FB00000040000208FB000000400002094
-:108620008FB00000040000208FB000000400002084
-:108630008FB00000040000208FB000000400002074
-:108640008FB00000558C004509B00000558C0045E6
-:1086500009B00000558C004509B00000558C00455C
-:1086600009B00000040000208FB0000004000020CA
-:108670008FB00000040000208FB000000400002034
-:108680008FB000009C8C004309B00000CB8C0043ED
-:1086900009B00000CF8C004409B000003E8E0045B8
-:1086A00009B00000040000208FB00000040000208A
-:1086B0008FB00000040000208FB0000004000020F4
-:1086C0008FB00000040000208FB00000DF8C00435A
-:1086D00009B00000DD8C004309B00000E08B0045CC
-:1086E00009B00000040000208FB00000040000204A
-:1086F0008FB00000040000208FB0000004000020B4
-:108700008FB00000988D004209B00000988D0043A2
-:1087100009B00000988D004409B00000E08B0045CE
-:1087200009B00000040000208FB000000400002009
-:108730008FB00000040000208FB000000400002073
-:108740008FB00000040000208FB00000B88D0043FF
-:1087500009B00000040000208FB00000E08B00454D
-:1087600009B00000040000208FB0000004000020C9
-:108770008FB00000040000208FB000000400002033
-:108780008FB00000040000208FB00000E08D004397
-:1087900009B00000E08D004409B00000E08B004506
-:1087A00009B00000040000208FB000000400002089
-:1087B0008FB00000040000208FB0000004000020F3
-:1087C0008FB00000040000208FB00000E08D004258
-:1087D00009B00000040000208FB00000E08B0045CD
-:1087E00009B00000040000208FB000000400002049
-:1087F0008FB00000040000208FB0000004000020B3
-:108800008FB00000040000208FB000000F8E0044E5
-:1088100009B00000040000208FB00000E08B00458C
-:1088200009B00000040000208FB000000400002008
-:108830008FB00000040000208FB000000400002072
-:108840008FB00000E08B004209B00000228E00458E
-:1088500009B00000228E004509B00000E08B004501
-:1088600009B00000040000208FB0000004000020C8
-:108870008FB00000040000208FB000000400002032
-:108880008FB00000248E004209B00000248E004307
-:1088900009B00000248E004409B00000248E004579
-:1088A00009B00000040000208FB000000400002088
-:1088B0008FB00000040000208FB0000004000020F2
-:1088C0008FB00000040000208FB0000004000020E2
-:1088D0008FB000002F8E004409B00000E08B0045EF
-:1088E00009B00000040000208FB000000400002048
-:1088F0008FB00000040000208FB0000004000020B2
-:108900008FB00000418E004209B00000308E00435D
-:1089100009B00000418E004409B00000E08B004522
-:1089200009B00000040000208FB000000400002007
-:108930008FB00000040000208FB000000400002071
-:108940008FB00000040000208FB00000438E004371
-:1089500009B00000378E004409B00000E08B0045EC
-:1089600009B00000040000208FB0000004000020C7
-:108970008FB00000040000208FB00000E08B0041A9
-:1089800009B00000968D004209B00000968D0043AA
-:1089900009B00000968D004409B00000E08B00454E
-:1089A00009B00000040000208FB000000400002087
-:1089B0008FB00000040000208FB00000E08B004169
-:1089C00009B00000458E004209B00000458E00430A
-:1089D00009B00000458E004409B00000E08B00455E
-:1089E00009B00000040000208FB000000400002047
-:1089F0008FB00000040000208FB0000004000020B1
-:108A00008FB00000040000208FB0000004000020A0
-:108A10008FB00000040000208FB000004C8E004595
-:108A200009B00000040000208FB000000400002006
-:108A30008FB00000040000208FB000004E8E004276
-:108A400009B00000040000208FB0000004000020E6
-:108A50008FB00000040000208FB000000400002050
-:108A60008FB00000040000208FB000000400002040
-:108A70008FB00000040000208FB000000400002030
-:108A80008FB000005B8E004309B00000C18E004330
-:108A900009B00000CF8C004409B000003E8E0045B4
-:108AA00009B00000040000208FB000000400002086
-:108AB0008FB00000040000208FB0000004000020F0
-:108AC0008FB00000040000208FB00000C98E00436A
-:108AD00009B00000CF8C004409B000003E8E004574
-:108AE00009B00000040000208FB000000400002046
-:108AF0008FB00000040000208FB0000004000020B0
-:108B00008FB00000040000208FB00000DD8E004315
-:108B100009B00000040000208FB00000E08B004589
-:108B200009B00000040000208FB000000400002005
-:108B30008FB00000040000208FB00000040000206F
-:108B40008FB00000968C004309B00000C58E004332
-:108B500009B00000CF8C004409B000003E8E0045F3
-:108B600009B00000040000208FB0000004000020C5
-:108B70008FB0000002002D0548B101000400A2F2F0
-:108B80000E6C00000400A2028032000007002D409D
-:108B900081B20100000000F308B0010010040040A1
-:108BA00089980100100000478AE401000999000437
-:108BB0008A1401000400204E096C00002A000047BE
-:108BC00080CE0100040024408132000006002047CE
-:108BD000E6B101000400004796E4010000000047F0
-:108BE00096D001000000004796D00100000000046C
-:108BF00096C001007D89004B10C90000F98E004924
-:108C000009B000000400002085B00000040000202E
-:108C100085B000000400002085B0000004000020A2
-:108C200085B000000400002085B000000400002092
-:108C300085B000000400002085B000000400002082
-:108C400085B000000400002085B000000400002072
-:108C500085B000000400002085B000000400002062
-:108C600085B000000400002085B000000400002052
-:108C700085B00000328F004209B0000004000020DF
-:108C800085B000000400002085B000000400002032
-:108C900085B000000400002085B000000400002022
-:108CA00085B000000400002085B000000400002012
-:108CB00085B000000400002085B000000400002002
-:108CC00085B000000400002085B0000004000020F2
-:108CD00085B000000400002085B0000004000020E2
-:108CE00085B00000398F004609B000000400002064
-:108CF00085B000000400002085B0000004000020C2
-:108D000085B000000400002085B0000004000020B1
-:108D100085B000000400002085B0000004000020A1
-:108D200085B000000400002085B000000400002091
-:108D300085B000000400002085B000000400002081
-:108D400085B000000400002085B000000400002071
-:108D500085B000000400002085B000004A8F00426A
-:108D600009B000000400002085B000006D8F0042B3
-:108D700009B000000400002085B0000004000020BD
-:108D800085B000000400002085B000000400002031
-:108D900085B000000400002085B000000400002021
-:108DA00085B00000678F004A09B000000400002071
-:108DB00085B000000400002085B000000400002001
-:108DC00085B000000400002085B00000748F0043CF
-:108DD00009B000000400002085B00000DF8F0044CF
-:108DE00009B000000400002085B00000040000204D
-:108DF00085B000000400002085B0000004000020C1
-:108E000085B000000400002085B0000004000020B0
-:108E100085B00000DD8F004B09B000000400002089
-:108E200085B000000400002085B000000400002090
-:108E300085B000003D8F004109B000000400002013
-:108E400085B000003D8F004309B000003D8F004415
-:108E500009B000003D8F004509B000003D8F00467D
-:108E600009B000003D8F004709B000003D8F004869
-:108E700009B000003D8F004909B000003D8F004A55
-:108E800009B000003D8F004B09B000003D8F004C41
-:108E900009B000003D8F004D09B000000400002023
-:108EA00085B000000400002085B00000489000421A
-:108EB00009B000000400002085B000004890004484
-:108EC00009B000000400002085B00000040000206C
-:108ED00085B000000400002085B0000004000020E0
-:108EE00085B000000400002085B0000004000020D0
-:108EF00085B000004890004B09B00000040000203D
-:108F000085B000000400002085B0000004000020AF
-:108F100085B000000400002085B00000040000209F
-:108F200085B000006590004509B0000004000020F5
-:108F300085B000000400002085B00000040000207F
-:108F400085B000000400002085B000007D9000473F
-:108F500009B000000400002085B0000056900045D4
-:108F600009B000000400002085B0000004000020CB
-:108F700085B000001593004609B0000004000020F1
-:108F800085B000000400002085B00000040000202F
-:108F900085B000000400002085B00000040000201F
-:108FA00085B000006D8F004609B000004A8F004672
-:108FB00009B00000658F004709B00000658F0048C8
-:108FC00009B000000400002085B00000040000206B
-:108FD00085B000000400002085B00000678F004AC3
-:108FE00009B000000400002085B00000040000204B
-:108FF00085B000000400002085B0000004000020BF
-:1090000085B000000400002085B0000004000020AE
-:1090100085B00000DF8F004509B00000748F004369
-:1090200009B00000658F004709B00000658F004857
-:1090300009B000000400002085B0000004000020FA
-:1090400085B000000400002085B00000DD8F004CDA
-:1090500009B000000400002085B0000004000020DA
-:1090600085B000000400002085B00000040000204E
-:1090700085B000000400002085B00000040000203E
-:1090800085B000008490004409B000008490004244
-:1090900009B00000C98B004709B00000C98B004827
-:1090A00009B000000400002085B00000040000208A
-:1090B00085B000000400002085B000008490004BC3
-:1090C00009B000000400002085B00000040000206A
-:1090D00085B000003D8F004109B00000AF9000470F
-:1090E00009B000000400002085B000009290004705
-:1090F00009B000000400002085B00000040000203A
-:1091000085B000000400002085B0000004000020AD
-:1091100085B000000400002085B00000040000209D
-:1091200085B000009290004709B0000004000020C4
-:1091300085B000000400002085B00000040000207D
-:1091400085B000000400002085B00000040000206D
-:1091500085B000000400002085B00000040000205D
-:1091600085B000009290004709B00000AF90004722
-:1091700009B00000658F004709B00000658F004806
-:1091800009B000000400002085B0000004000020A9
-:1091900085B000000400002085B0000092900047D8
-:1091A00009B000000400002085B000000400002089
-:1091B00085B000000400002085B0000004000020FD
-:1091C00085B000000400002085B0000004000020ED
-:1091D00085B000000400002085B0000004000020DD
-:1091E00085B00000BE90004709B00000BE90004866
-:1091F00009B000000400002085B000000400002039
-:1092000085B000000400002085B0000004000020AC
-:1092100085B000000400002085B00000040000209C
-:1092200085B000002F91004009B000005191004727
-:1092300009B000004391004809B000008A9000473F
-:1092400009B000008A90004709B000005191004722
-:1092500009B000005A91004709B000005A91004837
-:1092600009B000000400002085B0000043910048D0
-:1092700009B000008A90004709B000008A900047BA
-:1092800009B000004391004809B00000040000202C
-:1092900085B000000400002085B00000040000201C
-:1092A00085B000004890004309B000000400002091
-:1092B00085B000004890004509B000004890004685
-:1092C00009B00000658F004709B00000658F0048B5
-:1092D00009B000000400002085B000004890004A5A
-:1092E00009B000000400002085B000004890004C48
-:1092F00009B000000400002085B000000400002038
-:1093000085B000000400002085B00000AE9000474A
-:1093100009B00000A090004809B0000091900047FB
-:1093200009B000009190004709B00000AE900047DE
-:1093300009B00000C98B004709B00000C98B004884
-:1093400009B000000400002085B00000A090004893
-:1093500009B000009190004709B0000091900047CB
-:1093600009B00000A090004809B0000004000020EF
-:1093700085B000000400002085B000005D9100422F
-:1093800009B000000400002085B000005D91004499
-:1093900009B000000400002085B000000400002097
-:1093A00085B000000400002085B00000040000200B
-:1093B00085B000000400002085B0000004000020FB
-:1093C00085B000005D91004B09B000000400002052
-:1093D00085B000000400002085B0000004000020DB
-:1093E00085B000000400002085B0000004000020CB
-:1093F00085B000005D91004309B00000040000202A
-:1094000085B000005D91004509B000005D91004607
-:1094100009B000005D91004709B000005D9100486F
-:1094200009B000000400002085B000005D91004AF2
-:1094300009B000000400002085B000005D91004CE0
-:1094400009B000005D91004C09B00000040000204C
-:1094500085B000000400002085B00000040000205A
-:1094600085B000007A91004609B000000400002099
-:1094700085B000000400002085B00000040000203A
-:1094800085B000000400002085B000007D900047FA
-:1094900009B000000400002085B000007A91004669
-:1094A00009B000000400002085B000000400002086
-:1094B00085B000000400002085B0000004000020FA
-:1094C00085B000000400002085B0000004000020EA
-:1094D00085B000009C92004609B000000400002006
-:1094E00085B000000400002085B0000004000020CA
-:1094F00085B000000400002085B000007D9000478A
-:1095000009B000000400002085B000009C920046D5
-:1095100009B000000400002085B000000400002015
-:1095200085B000009C92004609B0000004000020B5
-:1095300085B000000400002085B000000400002079
-:1095400085B000000400002085B00000C5920042F4
-:1095500009B000000400002085B0000004000020D5
-:1095600085B000000400002085B000000400002049
-:1095700085B000000400002085B000000400002039
-:1095800085B00000C392004A09B00000040000202A
-:1095900085B000000400002085B000000400002019
-:1095A00085B000000400002085B000000400002009
-:1095B00085B000000400002085B0000004000020F9
-:1095C00085B00000C592004609B0000004000020EC
-:1095D00085B00000658F004709B00000658F004826
-:1095E00009B000000400002085B000000400002045
-:1095F00085B000000400002085B00000C392004A3E
-:1096000009B000000400002085B000000400002024
-:1096100085B000000400002085B000000400002098
-:1096200085B000000400002085B000000400002088
-:1096300085B000000400002085B000000400002078
-:1096400085B000000400002085B000000400002068
-:1096500085B000006A91004109B0000004000020BC
-:1096600085B000000400002085B000000400002048
-:1096700085B000000400002085B000000400002038
-:1096800085B000000400002085B000007791004202
-:1096900009B000000400002085B00000779100446C
-:1096A00009B000000400002085B000000400002084
-:1096B00085B000000400002085B0000004000020F8
-:1096C00085B000000400002085B0000004000020E8
-:1096D00085B000007791004B09B000000400002025
-:1096E00085B000000400002085B0000004000020C8
-:1096F00085B000000400002085B0000004000020B8
-:1097000085B000007791004309B0000004000020FC
-:1097100085B000007791004509B0000077910046C0
-:1097200009B000007791004709B000007791004828
-:1097300009B000000400002085B0000004000020F3
-:1097400085B000000400002085B000007791004C37
-:1097500009B000000400002085B0000004000020D3
-:1097600085B000000400002085B000000400002047
-:1097700085B000006590004C09B000000400002096
-:1097800085B000000400002085B000000400002027
-:1097900085B000000400002085B000007D900047E7
-:1097A00009B000000400002085B000005690004C75
-:1097B00009B000000400002085B000000400002073
-:1097C00085B000008393004609B00000040000202B
-:1097D00085B000000400002085B000000A9300421C
-:1097E00009B000000400002085B000000A93004486
-:1097F00009B000000400002085B000000400002033
-:1098000085B000000400002085B0000004000020A6
-:1098100085B000000400002085B000000400002096
-:1098200085B000000A93004B09B00000040000203E
-:1098300085B000000400002085B000000400002076
-:1098400085B000000400002085B000000400002066
-:1098500085B000000400002085B000000400002056
-:1098600085B000000A93004509B000000A93004645
-:1098700009B00000658F004709B00000658F0048FF
-:1098800009B000000400002085B0000004000020A2
-:1098900085B000000400002085B000000A93004C51
-:1098A00009B000000400002085B000000400002082
-:1098B00085B000000400002085B0000056900042F2
-:1098C00009B000001593004609B000000400002014
-:1098D00085B000000400002085B0000056900046CE
-:1098E00009B000000400002085B000007D90004712
-:1098F00009B000000400002085B000001593004668
-:1099000009B000000400002085B000000400002021
-:1099100085B000001593004609B000000400002047
-:1099200085B000000400002085B000000400002085
-:1099300085B000001C93004309B000000400002023
-:1099400085B000000400002085B000000400002065
-:1099500085B000000400002085B000007D90004725
-:1099600009B000000400002085B000001C930043F3
-:1099700009B000000400002085B0000004000020B1
-:1099800085B000001C93004D09B0000004000020C9
-:1099900085B000000400002085B000000400002015
-:1099A00085B000000400002085B000003293004321
-:1099B00009B000000400002085B000000400002071
-:1099C00085B000000400002085B0000004000020E5
-:1099D00085B000000400002085B0000004000020D5
-:1099E00085B000000393004A09B000000400002085
-:1099F00085B000000400002085B0000004000020B5
-:109A000085B000000400002085B0000004000020A4
-:109A100085B000000400002085B000000400002094
-:109A200085B000003293004309B00000040000201C
-:109A300085B00000658F004709B00000658F0048C1
-:109A400009B000000400002085B0000004000020E0
-:109A500085B000000400002085B000000393004A98
-:109A600009B000000400002085B0000004000020C0
-:109A700085B000000400002085B000000400002034
-:109A800085B000004A93004309B0000004000020A4
-:109A900085B000000400002085B000000400002014
-:109AA00085B000000400002085B000007D900047D4
-:109AB00009B000000400002085B000004A93004374
-:109AC00009B000000400002085B000000400002060
-:109AD00085B000004A93004D09B00000040000204A
-:109AE00085B000000400002085B000004A8F0042CD
-:109AF00009B000000400002085B000006D8F004216
-:109B000009B000000400002085B00000040000201F
-:109B100085B000000400002085B000000400002093
-:109B200085B000000400002085B000000400002083
-:109B300085B000006D93004209B0000004000020D1
-:109B400085B000000400002085B000000400002063
-:109B500085B000000400002085B000000400002053
-:109B600085B000000400002085B000000400002043
-:109B700085B000006D8F004609B000004A8F004696
-:109B800009B00000658F004709B00000658F0048EC
-:109B900009B000000400002085B00000040000208F
-:109BA00085B000000400002085B000006D930046E1
-:109BB00009B000000400002085B00000040000206F
-:109BC00085B000000400002085B0000004000020E3
-:109BD00085B000007493004A09B000000400002022
-:109BE00085B000000400002085B0000004000020C3
-:109BF00085B000000400002085B000007D90004783
-:109C000009B000000400002085B000007493004AF1
-:109C100009B000000400002085B00000040000200E
-:109C200085B000001693004609B000000400002033
-:109C300085B000000400002085B000000400002072
-:109C400085B000001693004609B000000400002013
-:109C500085B000000400002085B000000400002052
-:109C600085B000000400002085B000007D90004712
-:109C700009B000000400002085B0000016930046E3
-:109C800009B000000400002085B00000040000209E
-:109C900085B000001693004609B0000004000020C3
-:109CA00085B000000400002085B000000400002002
-:109CB00085B000000400002085B000007D930042C4
-:109CC00009B000000400002085B00000040000205E
-:109CD00085B000000400002085B0000004000020D2
-:109CE00085B000000400002085B0000004000020C2
-:109CF00085B000000393004A09B000000400002072
-:109D000085B000000400002085B0000004000020A1
-:109D100085B000000400002085B000000400002091
-:109D200085B000000400002085B000000400002081
-:109D300085B000007D93004609B0000004000020BB
-:109D400085B00000658F004709B00000658F0048AE
-:109D500009B000000400002085B0000004000020CD
-:109D600085B000000400002085B000000393004A85
-:109D700009B000000400002085B0000004000020AD
-:109D800085B000000400002085B00000748F004DF5
-:109D900009B000000400002085B00000040000208D
-:109DA00085B000000400002085B000000400002001
-:109DB00085B000000400002085B0000004000020F1
-:109DC00085B000000400002085B0000004000020E1
-:109DD00085B000000400002085B0000004000020D1
-:109DE00085B000000400002085B0000004000020C1
-:109DF00085B000000400002085B0000004000020B1
-:109E000085B000000400002085B0000004000020A0
-:109E100085B000000400002085B00000748F004D64
-:109E200009B00000658F004709B00000658F004849
-:109E300009B000000400002085B0000004000020EC
-:109E400085B000000400002085B000000400002060
-:109E500085B000000400002085B000000400A205C9
-:109E6000486D0000040022078032000007002E4BDE
-:109E700019900100FB870004E6B10000C98B224263
-:109E8000197C00000F97003A81300100C98B004017
-:109E900081B20000C98B2242197C0000FF1F000F15
-:109EA0001E8C01007396004081320100DB8B9C0FF9
-:109EB000803200000000005C1F8001000080001064
-:109EC00042C90100DB8B2240E36D00000000004529
-:109ED00061B101004000001062DD0100D88BA84094
-:109EE00081320000238300881CB000001D852202FF
-:109EF00080320000DC8B42408132000000000044D0
-:109F00009393010000001A02689701001D8500402C
-:109F100005B000000400A205486D000004002207FF
-:109F20008032000005002E4B19900100FB870004D1
-:109F3000E6B100000000004087B0010000000040D2
-:109F40008DB001000080000342C90100400000A163
-:109F500044C90100000000F0E0B101007F98000654
-:109F6000074001000400A25C1F7C00000000000606
-:109F700007D00100D4002E5C1F90010000000007F4
-:109F8000F0B101000C80000342C90100000000F0A4
-:109F9000F0B101000000004081B20100000000FEAD
-:109FA00096B00100000000FE96C00100000000F025
-:109FB000F0B101000000004081B20100000000FE8D
-:109FC00096C00100000000FE96C00100000000F0F5
-:109FD000F0B101000000004081B20100000000FA71
-:109FE00096C00100000000FE96C001000030004B4A
-:109FF000948801000000004695F001000000004A2E
-:10A0000096C001005E012E34978401000200004BCF
-:10A01000E4E5010064012040E1B10100090000070E
-:10A0200086E4010000002EA787C001001000001088
-:10A0300048C9010010000040F19901005801004397
-:10A04000F0C9010058010005E0C90100000000440A
-:10A0500061B10100A00000A462DD0100088CA840ED
-:10A06000813200000000000548B101001A000040E4
-:10A070009798010008002E4095B00100108C204BED
-:10A08000946C000000000040F1B101000D8C004113
-:10A0900095C000001080001042C90100178C2240BA
-:10A0A000E36D00000000004461B1010040000010B9
-:10A0B00062DD0100138CA8408132000023830088F8
-:10A0C0001CB000000000000548B101000F970040DF
-:10A0D00081300100E08B004081B200000C80000361
-:10A0E00042C90100000000F886B00100000000F83D
-:10A0F00088B001001480000398C801000400A2A1E8
-:10A10000986C00001E8C444081320000218CA24CCF
-:10A11000FD7F0000228C004CFD930000238C20F07A
-:10A12000566F0000000000F056B3010000001C4014
-:10A1300081B2010064000040819801006400004089
-:10A1400080CC01000400A64081320000D80000400D
-:10A15000819801000400A2438104000000800010E7
-:10A1600044C9010064000040F1990100700000053D
-:10A17000F0C9010000000043F0B1010000000047F9
-:10A1800061B101002000001062DD01002E8CA844A6
-:10A19000E0310000100000108CC801000080004673
-:10A1A00044C9010040000040F19901006801000528
-:10A1B000F0C9010064000043F0C90100040024401C
-:10A1C000813200000000004761B10100000000463C
-:10A1D00062B10100378CA844E0310000238300887D
-:10A1E0001CB000000900000786E4010038002EA71B
-:10A1F00087C001008B002D0548B101003F8C224330
-:10A20000E77D00000000004445C10100428C22446B
-:10A21000E77D00000000004C45C101000000004A3D
-:10A2200019900100680120A2E4B1010088000040FB
-:10A2300043990100468C230BE56D000000000041AE
-:10A24000199001000080001044C901005000004036
-:10A25000F199010058010043F0C9010058010005BF
-:10A26000E0C901000000004461B1010000000010DD
-:10A2700062B101004B8CA84081320000238300882A
-:10A280001CB000005C002E0548B1010000800003F6
-:10A2900042C90100000060F096B00100A00000403B
-:10A2A000439901000400A2F2803200000F970041A0
-:10A2B00081300100E08B004081B20000588CA2493F
-:10A2C000197C000086000040479901005C8C00402A
-:10A2D000E5B1000086002F49198001005C8CA2F2D4
-:10A2E000803200008B0000404799010000000042CE
-:10A2F000E79101005F8CA246197C0000A00000409D
-:10A3000047990100638C0040E5B10000A0002F4692
-:10A3100019800100638CA2F2803200008B000040A3
-:10A320004799010000000041E79101000700004E3D
-:10A3300080E401000039004080C801000400A24010
-:10A34000066C0000A80000404399010034002DF085
-:10A3500024B00100000000FB0CB00100000000FB75
-:10A3600010B00100000000FB12B001000F0000F36C
-:10A3700016880100040000F314F40100938C2640B9
-:10A3800081320000798C220A166C000058003D438F
-:10A3900013E00100000000F882B00100040022F088
-:10A3A000843000001B980040813201002383008824
-:10A3B0001CB000000000000548B101000000004191
-:10A3C00013C00100788CA043136C00000000004013
-:10A3D00013B001006E8C004115D00000938C220A4E
-:10A3E000803200000400A208126C000058003D43B7
-:10A3F00013E00100000000F882B00100040022F028
-:10A40000843000001B980040813201004000204051
-:10A41000E1B10100238300881CB0000000000005AA
-:10A4200048B10100938C224115500000000000410A
-:10A4300011C00100868CA043116C00000000004098
-:10A4400011B0010004002206106C000058003D43CA
-:10A4500011E00100000000F836B00100040022F015
-:10A46000003000000000005083B001005497004706
-:10A4700061310100238300881CB000003194000585
-:10A48000483101000000004561B1010040000010AA
-:10A4900062DD01008F8CA840813200002383008898
-:10A4A0001CB00000828C000548B10000370020403D
-:10A4B000E7B101008697005181300100E08B004038
-:10A4C00081B2000037000040439901000400A2F36C
-:10A4D0008032000034002E41F5B10100001100402F
-:10A4E000E59901000400A248197C0000A08C0048F6
-:10A4F0001990000037000040439901000400A2F3C6
-:10A500008032000034002E41F5B1010000110040FE
-:10A51000E59901000080000342C90100000000F835
-:10A5200094B00100A78C2245237C0000B0002FF0DE
-:10A530008CB00100000060F08CC001007C00004085
-:10A54000439901000400A3F08C6C000090000040CF
-:10A550004399010035002DF08CB0010034002DF33B
-:10A5600084B00100040022F3846C000058003E43D4
-:10A5700085E00100AE8C2248197C000000000041FB
-:10A580008DC001000000680A8CC0010038002A4A12
-:10A59000E0B1010028000000E0C901003C00201BE0
-:10A5A000E0B101001080000342C90100000000F882
-:10A5B00038B00100000000F826B00100040022F8C5
-:10A5C00002300000BC8C2301146C0000000000F875
-:10A5D00080B00100000000F882B001004C0020F0C3
-:10A5E000E4B1010044002040E0B1010048002041F6
-:10A5F000E0B10100A8002D1032B001005F9800F01A
-:10A6000024300100C58CA244816C0000C38C22411F
-:10A61000197C0000BC9500403B300100ED8CA20885
-:10A620003C300000C58C004081B20000BF94004067
-:10A6300081320100ED8CA2083C3000005000201C4B
-:10A64000E0B1010054002013E0B101004E002001F0
-:10A65000E4B101004000200AE0B101008697005FEC
-:10A6600081300100E08B004081B2000037000040E3
-:10A6700047990100959500F394300100A08C224A7F
-:10A6800080320000D18C004081B2000037000040D1
-:10A6900047990100959500F3943001000400204390
-:10A6A000976C000058003E4397E001000000001B3B
-:10A6B000F0B101001F006000008C0100E08B8511EB
-:10A6C000803200000480000342C90100B0002FF076
-:10A6D0008CB00100000060F08CC001007C000040E4
-:10A6E000439901000400A3F08C6C00008697005F82
-:10A6F00081300100E08B004081B20000040022495B
-:10A70000197C0000DF8C004919800000E48C224194
-:10A71000197C0000BC9500403B300100E88CA20889
-:10A720003C3000008697005F81300100E08B0040E4
-:10A7300081B20000BF94004081320100E88CA20881
-:10A740003C3000008697005F81300100E08B0040C4
-:10A7500081B2000050002D1032B0010054002DF0E5
-:10A7600038B001004E002DF026B0010040002DF25F
-:10A7700002B00100000000F014B001003000001031
-:10A780008CC801000080004644C9010068012D44C6
-:10A7900061B10100100068F280C8010000000008EB
-:10A7A000F0B1010058010005E0C901000000000BF4
-:10A7B00037B001000000004036D001005C012E409F
-:10A7C00010C001000000000680C00100000000521F
-:10A7D00081D0010018970040E431010020000046BC
-:10A7E00062DD0100F98CA840233000000E95004086
-:10A7F000813201001695004081320100078D8241AF
-:10A80000234000002080001042C90100048D224036
-:10A81000E36D00000000004661B10100400000103F
-:10A8200062DD0100018DA840813200002383008891
-:10A830001CB000000000000548B10100000000103D
-:10A8400032B001000000004123B001000080001977
-:10A8500044C901000F8D2241197C00000B8DA3011A
-:10A860000C6C00000C8D000604B00000000000011C
-:10A8700004B001000E8D2002366C00000000001BA9
-:10A8800004B00100128D0002E0B10000118DA3019F
-:10A890000C6C0000128D000604B0000000000001E6
-:10A8A00004B001000000680216940100FFFF000BD5
-:10A8B00016D80100000068083E9601000000001C48
-:10A8C000F0B101000000004661B101002000001954
-:10A8D00062DD0100178DA813E0310000548D2202C3
-:10A8E0001450000044002D020CD001003F8DA20244
-:10A8F00002500000258D225C1F7C00002080000398
-:10A9000042C90100248D2240E36D00000000004791
-:10A9100061B101004000001062DD0100208DA840FF
-:10A9200081320000238300881CB000000000000575
-:10A9300048B1010044002D5C1F80010048002DF04B
-:10A9400038B001004C002DF026B0010038002FF285
-:10A9500002B00100418D2201146C00000400A440EB
-:10A9600081320000338D22461F7C0000000000462B
-:10A970001F80010020002D0348B10100328D2240CC
-:10A98000E36D00000000004461B1010040000010D0
-:10A9900062DD01002F8DA8408132000023830088F2
-:10A9A0001CB0000038002F0548B10100000000F87D
-:10A9B00094B0010038002DF096B001000000004C6A
-:10A9C000E1C101002000000348C901000000224A43
-:10A9D000F1B1010044000005F0C901000000004A87
-:10A9E000F0B101000000004BE0B1010000000047A1
-:10A9F00061B10100A00000A462DD01003C8DA85CF3
-:10AA00001F100000418D000548B100000000000249
-:10AA100038C0010004002440813200004F8D22061E
-:10AA2000803200000000005033C001004D8DA202B2
-:10AA3000366C000004002241197C000004008F0DD8
-:10AA400042310000040022F0803200000400225C49
-:10AA5000E17D00000400A2F06A060000100000F88A
-:10AA600010C801000000005C11800100F0070040E8
-:10AA700037980100FD8C00A11AB000000000000210
-:10AA800010C00100FD8C000236D000005000201CD8
-:10AA9000E0B1010054002013E0B101004E0020019C
-:10AAA000E4B101004000200AE0B101005B8D005FCD
-:10AAB00001B000000400A202026C00000400A20227
-:10AAC0000C6C000037002D4601B00100040000F3BB
-:10AAD00080F401005A8DA043816C000000000055F5
-:10AAE00001B0010040002040E1B1010000800019E8
-:10AAF00042C90100618D2240E36D00000000004664
-:10AB000061B101004000001962DD01005E8DA840C6
-:10AB100081320000238300881CB0000013950040A0
-:10AB2000813201003080001042C90100688D22404E
-:10AB3000E36D00000000004461B10100400000101E
-:10AB400062DD0100658DA84081320000238300880A
-:10AB50001CB0000060012F0548B101000000000B8F
-:10AB6000E4B101000000005017F001006D8D90F27B
-:10AB7000164000000000004117C0010000006620E0
-:10AB800017A40100320000A62AC00100000000F254
-:10AB90002A940100708D45486131000000D0001EEC
-:10ABA00062DD0100758D284005300000718D22485E
-:10ABB000777D0000788D004081B200000000001514
-:10ABC00062B10100838D284081320000758D004004
-:10ABD00081B2000000001D0092B00100808D224172
-:10ABE000197C0000040022403B6C00000400A348D4
-:10ABF0003B6C00000080000342C90100C99400F8CA
-:10AC0000003001007D8DA2413B500000848D004941
-:10AC100000B00000FF07001E008C0100C994004036
-:10AC200081320100848D004900B0000000001D4702
-:10AC300019800100878D225F016C00008E98004012
-:10AC400081320100AA88000080B000008E8D225C55
-:10AC50001F7C00002080000342C901008E8D22402D
-:10AC6000E36D00000000004761B1010040000010EA
-:10AC700062DD01008B8DA8408132000023830088B3
-:10AC80001CB000008E8D400548310000FFFF00071A
-:10AC900094890100948D85CA943000008E98185CC8
-:10ACA0001F0001000E00000F1E8C0100B78700403E
-:10ACB00081B200008697180080300100E08B0047C9
-:10ACC000198000000000004019800100E08B22473D
-:10ACD000197C0000BF940040813201009B8DA208C6
-:10ACE00080320000E08B004081B2000018970040E5
-:10ACF0000D3001009C01004045990100FFFF000B51
-:10AD0000988801008B002D5017F00100A18D904C08
-:10AD1000164000000000004117C00100A38D22432F
-:10AD2000E77D00000000004445C1010000006620EE
-:10AD300017A4010068010040439901005C012EF254
-:10AD400080B00100020062407ECD0100000000578B
-:10AD500081C0010000002E1048B101000300004036
-:10AD6000F08D010000000008F0B10100580100055D
-:10AD7000E0C901000000004461B1010000000010C2
-:10AD800062B10100AD8DA8408132000023830088AC
-:10AD90001CB000000000000548B10100B18D45481D
-:10ADA000613100000050000862DD0100B78D2840CD
-:10ADB00005300000B28D2248777D0000C9941D083F
-:10ADC00000300100E08B004081B20000E08B1D47A5
-:10ADD000198000000400A205486D00003500004005
-:10ADE00047990100010063F384C80100BD8DA043B1
-:10ADF000856C00000000634085B00100A8000040A1
-:10AE00004399010037002FF024B00100040022F321
-:10AE10009E060000010063F382CC0100CB8DA241AD
-:10AE20009E060000E08B224483700000A8000040D2
-:10AE3000439901000400A2F0246C00003600004099
-:10AE40004399010058003D43E7E10100E08B1FF00A
-:10AE5000246C00008E98004881300100AA882341AC
-:10AE6000836C0000AA88004781B0000034000040D5
-:10AE70004399010004002242E66D000058003D4362
-:10AE800085E00100000000F836B00100000000F08D
-:10AE900000B0010004002200803200000400A20083
-:10AEA000BE06000028000040839801005497004728
-:10AEB00061310100238300881CB0000000002D03D5
-:10AEC00048B1010008002DF094B00100000000F826
-:10AED0008EB0010090002DF014B0010000000005BC
-:10AEE00048B10100A88CA2408F7C0000DE8D224773
-:10AEF0008F7C00000400A248197C0000A88C004848
-:10AF000019900000040022468F7C0000608E0040F3
-:10AF100081B200000400A205486D000036002D5DDE
-:10AF200005B4010037002DF380B00100000000F3EC
-:10AF30008EB00100F00000477E8901000400264029
-:10AF4000813200005C003D4381E00100A8002DF04B
-:10AF500094B001000400224A80320000000000F09A
-:10AF600024B001002000001086DC010040800003B6
-:10AF700044C901009293004AF03101000400A25C30
-:10AF80001F7C000036002F5C1F900100F28DA25044
-:10AF90008F50000034002040E1B10100E08B004000
-:10AFA00081B20000F00000477E89010004002640C5
-:10AFB000813200000000634181C00100F78DA04391
-:10AFC000816C00000000634081B001003700204721
-:10AFD000E6B10100E08B2247803200000400004708
-:10AFE0000CF401000000004F8F8401000C8E2247FA
-:10AFF0000C6C000058003D4381E001000C8E1FF0F6
-:10B00000246C00000000005C1F8001000080001024
-:10B0100042C90100058E2240E36D0000000000459A
-:10B0200061B101004000001062DD0100028EA84005
-:10B0300081320000238300881CB00000058E42404E
-:10B0400005300000000000449393010000001A5DE9
-:10B05000699301000A8E23410D6C0000E08D00050C
-:10B0600048B100008E98000548310100AA880048C8
-:10B0700081B00000E08B22408F6C00008697005F5B
-:10B0800081300100E08B004081B200004002000CE2
-:10B090007E8901000400A64081320000A200004029
-:10B0A00043990100000000F384B00100A6002D497F
-:10B0B00019900100020000F280F40100B8002D4058
-:10B0C00081B20100000000F280C0010000000040D9
-:10B0D00082F8010019000040819801001D8EA040F7
-:10B0E000826C00002C010040819801001D8EA3405D
-:10B0F000826C00000000004180B001001F8E204CD7
-:10B10000856C00000000004185C0010086002040E1
-:10B11000E4B10100A2002042E6B10100E08B004052
-:10B1200081B200000F97005081300100E08B004099
-:10B1300081B200000480000342C90100040022F033
-:10B1400080300000000000408DB001007F9800407A
-:10B15000873001000400A25C1F7C0000B0002F5C5F
-:10B160001F900100000060F080C001007C000040E2
-:10B17000439901000400A3F0806C00008697005FF3
-:10B1800081300100E08B004081B2000004000040EB
-:10B1900081B20000E08B2246197C0000A000004034
-:10B1A00047990100010062F296CC0100E08BA640B5
-:10B1B000813200008697004A813001005B9700468B
-:10B1C00095300100E08B004081B20000E08B224905
-:10B1D000197C00008600004047990100010062F2DE
-:10B1E00080CC0100E08BA640813200008697004AA7
-:10B1F000813001005B97004795300100E08B0040F3
-:10B2000081B2000031940040813201000400A25C50
-:10B210001F7C0000E08B005C1F9000000400A24631
-:10B22000197C0000E08B004081B200000400A249BC
-:10B23000197C0000E08B004081B20000BA000040A1
-:10B2400047990100010062F280C80100498E9040D8
-:10B2500080320000FFFF624081980100A40000409E
-:10B2600047990100E08B2240E56D0000E08B004132
-:10B27000E5C100000F97004D81300100E08B0040D8
-:10B2800081B200005C00004047990100040022F0F8
-:10B290009630000000000040E1B101000080000392
-:10B2A00044C901000000004BE0B101000000004073
-:10B2B0008DB001007F980040873001008B00004076
-:10B2C00047990100598E80F396300000000000403D
-:10B2D000E781010000000047199001000400A25C12
-:10B2E0001F7C0000E08B005C1F90000037000040D6
-:10B2F000439901000400A2F38032000034000040B2
-:10B300004599010001000040F5990100001100403D
-:10B31000E5990100BF94004081320100718EA208BE
-:10B32000803200003700004047990100000000F320
-:10B3300082B001000000635183D00100340000405E
-:10B3400047990100010063F384CC0100698E9F429C
-:10B35000803200000000634285B00100000000451B
-:10B3600003F001000000000100C001006B8E375C9B
-:10B37000613100000000001B62B101006C8EA84B1F
-:10B38000191000000000000062B101006E8EA8409C
-:10B3900081320000F087174081B200000080000376
-:10B3A00042C9010090002DF094B00100AC002DF0D6
-:10B3B00030B0010035002DF028B0010034002DF32D
-:10B3C00084B00100040022F3846C000058003E4366
-:10B3D00085E0010001000018F0C901000000004AEA
-:10B3E000E0B1010038002000E0B101003C00201B6A
-:10B3F000E0B1010040002040E1B101000000004048
-:10B400002BB001006A9700400D30010000000018C9
-:10B4100016C00100828EA0141644000000000041F6
-:10B4200017C001000E0000A244C90100000000186E
-:10B43000F8B10100B0002D14F8B101001050004027
-:10B44000879801008B8E224A197C0000003000434F
-:10B4500086C801000030000B16C801008B8EA44086
-:10B46000813200000000004117C0010001006E435E
-:10B4700086980100AE970030813001008F8EA04188
-:10B48000174000000000004117C00100968E224ABC
-:10B49000197C0000080000A244C90100CC002DABBB
-:10B4A000F9B10100000000AB17C00100958EA0F0BB
-:10B4B000164400000000004117C00100000064F0C5
-:10B4C00082B00100900000404599010000006041F9
-:10B4D00031C00100BC000040439901009C8E060C65
-:10B4E00080320000A00020F2E4B10100040009460F
-:10B4F000191000009C01004045990100FFFF000B5E
-:10B50000988801008B002D5017F00100A18E904CFF
-:10B51000164000000000004117C00100A38E224326
-:10B52000E77D00000000004445C1010000006620E6
-:10B5300017A4010068010040439901005C012EF24C
-:10B5400080B00100020062407ECD01000000005783
-:10B5500081C0010000002E1048B10100030000402E
-:10B56000F08D010000000008F0B101005801000555
-:10B57000E0C901000000004461B1010000000010BA
-:10B5800062B10100AD8EA8408132000023830088A3
-:10B590001CB000000000000548B10100B18E454814
-:10B5A000613100000050000862DD0100B28EA84049
-:10B5B0000530000035001D4047990100010063F38C
-:10B5C00084C80100B88EA043856C00000000634071
-:10B5D00085B001003700004047990100040022F3C4
-:10B5E0009E060000010063F382CC01000400A2412A
-:10B5F0009E0600008B000040479901000400A24510
-:10B60000E77D000000000045E79101008697005F9C
-:10B6100081300100E08B004081B200003700004023
-:10B6200047990100959500F394300100608E224AFD
-:10B6300080320000D18C004081B200003700004011
-:10B6400047990100959500F3943001009A8C224AA5
-:10B6500080320000D18C004081B2000036000040F2
-:10B6600043990100000000FB12B001000F0000F33D
-:10B6700090880100040000F30CF40100040026404F
-:10B6800081320000CB8C2206906C00000400AA409E
-:10B69000813200005C003D4313E00100A8002DF062
-:10B6A00094B0010004002240956C000037002FF098
-:10B6B00024B0010036002A50E7D1010000006341A8
-:10B6C00013C00100D88EA043136C0000000000409E
-:10B6D000E7B101008F9300108630010023830088BA
-:10B6E0001CB00000DA8E4205483100000000004422
-:10B6F00093930100CB8C1A5D699300000400A205AE
-:10B70000486D000036002D1086B001005C003D43FE
-:10B71000E7E10100A8002DF094B001000400224AE6
-:10B720008032000035002FF024B0010001006BFBD7
-:10B7300084C80100E78EA043856C000035002040DE
-:10B74000E7B101000000004081B20100010063F395
-:10B7500012C80100EA8EA043136C000000000040F4
-:10B76000E7B101004080000344C901009293004A00
-:10B77000F0310100238300881CB00000ED8E4205EB
-:10B7800048310000000000449393010000001A5D5E
-:10B79000699301003700004047990100040022F33B
-:10B7A0009E060000110063F382CC010004001F41DB
-:10B7B00080320000C28D22419E060000350000400C
-:10B7C0004399010058003D43E7E10100000000F803
-:10B7D00036B00100D08D00F000B000005E012D05F4
-:10B7E00048B10100FA8E65F21230000000993F4224
-:10B7F00013F00100FF8E2247E77D00002783758844
-:10B800001CB00000F98E004081B20000000000472B
-:10B81000E791010000007542199001007500004099
-:10B8200061990100018FA8B10C300000A9960010A9
-:10B8300094300100238300881CB000005E012E05B7
-:10B8400048B10100C0A83D460DE0010000000040E5
-:10B8500097B001000B8F2240E16D0000040002410F
-:10B8600097400000088F005043C10000178F224B03
-:10B87000803200000000624B1294010009000007B2
-:10B8800096E40100000000A797C0010030000010FE
-:10B8900094C801000080004A449901000000004261
-:10B8A000F1B101005E01004BF0C901005E0100052D
-:10B8B000E0C901000000004461B101002000004A1D
-:10B8C00062DD0100158FA840813200000080001069
-:10B8D00044C9010000000050F1B10100040000095A
-:10B8E00096E40100000068A897C00100D40000059C
-:10B8F000E0C901000000004461B101000000001037
-:10B9000062B101001D8FA8408132000023830088AE
-:10B910001CB0000000993F4213F00100218F6540E8
-:10B92000813200003F0000F39688010000000040D3
-:10B93000E7B101000000755561B10100000000068B
-:10B9400062B10100258FA840813200002A8F224B6E
-:10B95000803200000000004B62B10100288FA84037
-:10B96000813200000000009713B001000000009633
-:10B9700097B00100308F2009966C0000308F1F09AE
-:10B9800096240000278300881CB000002B8F004005
-:10B9900081B200000F97005781300100C98B00056C
-:10B9A00048B1000004002242197C00002E00004033
-:10B9B00043990100378F22F3803200000F97004235
-:10B9C00081300100F087004081B20000869700526C
-:10B9D00081300100C98B004219800000040022421E
-:10B9E000197C00000F97003A8130010086970052C1
-:10B9F00081300100C98B004081B20000000000408E
-:10BA000005B001000596004095300100C98B224029
-:10BA1000956C0000240400408998010009990000F9
-:10BA20008A300100458FA2401F7C0000C99400406D
-:10BA300081320100F087004081B2000004800003E1
-:10BA400042C90100000000F202B00100A5950052B9
-:10BA500095300100AC95004B02B00000F08700402B
-:10BA600081B200002B98004095300100518FA20850
-:10BA700080320000518FA21680320000F0872242EF
-:10BA8000197C00000000004B199001000F97003A4C
-:10BA900081300100F087004081B20000002300A641
-:10BAA00016B00100548F831E803200000008000B86
-:10BAB00016DC0100000000002AC001005E970008AB
-:10BAC00080300100588F005E179000007F97004380
-:10BAD000613101009E9300408D30010066970007A0
-:10BAE000161401000080001042C90100608F22403E
-:10BAF000E36D00000000004361B101004000001050
-:10BB000062DD01005D8FA840813200002383008840
-:10BB10001CB000000097005E05100100C9940040B1
-:10BB200081320100648F2209803000008697004036
-:10BB300013300100D08B000548B100003C96004056
-:10BB400081320100C98B004081B200000400A24A8A
-:10BB50001F7C00000000004A1F9001006C8F2243F0
-:10BB60003D7C0000000000441990010000000043EB
-:10BB70003D8001006D8F0042199000000400A24F2B
-:10BB80002B7C00000400A2451F7C000014002D4502
-:10BB90001F9001000400A2F0146C00000400A0013A
-:10BBA000146C0000DF8F831E80320000DF8F0044A2
-:10BBB000199000002F000040439901000400A247A3
-:10BBC000E77D0000B494004081320100878FA20815
-:10BBD00080320000878FA21680320000838FA2423D
-:10BBE000197C00000082000204DC0100A0980040E3
-:10BBF000479901003005004189300100808FA24142
-:10BC0000197C0000C994004081320100F087004097
-:10BC100081B20000A595001594300100AC95004B51
-:10BC200002B00000F087004081B200003C96004066
-:10BC3000813201000000004B199001000F97003A7B
-:10BC400081300100F087004081B200008A8F2242DB
-:10BC5000197C00003C960040813201008B8F00402F
-:10BC600081B200000596004081320100C38F22415D
-:10BC7000197C0000C000001598C80100C38FA00BFC
-:10BC8000996C0000040022441F7C0000FF070000A4
-:10BC90007E8901000400A6408132000030000010BF
-:10BCA00080C801000080004044990100000000505D
-:10BCB000F1B1010000000003F0B1010000000042FA
-:10BCC00061B101000000004062B10100968FA80040
-:10BCD000E0310000238300881CB000000000000554
-:10BCE00048B10100C000001598C8010030002E0BBB
-:10BCF00099D0010000006A5099C001000400200B97
-:10BD0000996C0000C000620180CC01000C8000032F
-:10BD100042C901002D002DF022B001000000004CAE
-:10BD200080C001000000005C23800100D4003F417E
-:10BD3000E7E1010004002242197C00000B0000F240
-:10BD400098E401000000005A998001000400A2005C
-:10BD5000986C0000200400408998010009990011A6
-:10BD60008A3001000B000011E4F501002F0020478C
-:10BD7000E7B50100AE8F230B816C00000000004F7F
-:10BD8000E59101000000000880B00100C100000141
-:10BD900080CE01000400A440813200000000000BAE
-:10BDA00003B001000000001502D001005E97000002
-:10BDB0002A4001000000004361B101004000001072
-:10BDC00062DD0100B58FA840813200002383008826
-:10BDD0001CB00000C994000548310100C0000001FA
-:10BDE00080CE0100C18F261100300000100000003D
-:10BDF0002AC801000000000880B001000000000116
-:10BE000080C00100C00000409998010000000001BE
-:10BE100098D001005E97004C02300100C000004045
-:10BE200003980100CB8F004081B2000030002F0842
-:10BE300080B00100C0000015F4C90100C00000017D
-:10BE4000E4CD0100C100000180CE01000400A44047
-:10BE5000813200000400200BE56D0000C0000040AE
-:10BE6000039801005E9700002A400100D08F224411
-:10BE70001F7C0000AC002F4013B001000000000147
-:10BE8000E0C10100B000004047990100D18F0001DE
-:10BE9000E0D100009E9300408D300100806300A639
-:10BEA00016B001006697000716140100008000100C
-:10BEB00042C90100D98F2240E36D00000000004319
-:10BEC00061B101004000001062DD0100D68FA84082
-:10BED00081320000238300881CB000000097005EC0
-:10BEE00005100100DC8F2209803000008697004099
-:10BEF00081320100C98B000548B100000400A24A4C
-:10BF00001F7C0000DF8F004A1F9000000400A24F3A
-:10BF10002B7C00000400A25C1F7C00000400A244F3
-:10BF20001F7C00000000000010B0010024002D154F
-:10BF300010C0010028002DF016B0010022002DF0E5
-:10BF400026B0010014002FF20CB001000000000127
-:10BF5000E0D101000000001032B001000000000B31
-:10BF60001BB0010004001F151A5000000000004023
-:10BF700023B00100000000012AB00100BE9600407D
-:10BF800035B000002F002040E7B101002990A24504
-:10BF90001F7C00000400A205486D00002400200B57
-:10BFA000E0B1010028002013E0B1010022002006CA
-:10BFB000E4B10100FD8F225C1F7C00000000005CEA
-:10BFC0001F8001003080001042C90100FD8F224017
-:10BFD000E36D00000000004761B101004000001067
-:10BFE00062DD0100F98FA8408132000023830088C0
-:10BFF0001CB000000000000548B101001400004022
-:10C00000439901000400A2F0146C000000800019A4
-:10C0100042C9010022902240E36D000010902242AC
-:10C02000197C000073960040813201005A94004050
-:10C03000813201001D90224B80320000000000433D
-:10C0400061B101004000001062DD01000690A840CF
-:10C0500081320000238300881CB000000C90224134
-:10C06000197C0000E7940040113001000D9000059C
-:10C0700048B10000C9940040813201000F902209AC
-:10C080008030000086970040813201002F830040FD
-:10C0900005B0000073960040813201004F940040CB
-:10C0A000813201000000004361B101004000001036
-:10C0B00062DD01001390A8408132000023830088D4
-:10C0C0001CB0000019902241197C0000E794004048
-:10C0D000113001001A90000548B10000C9940040D9
-:10C0E000813201001C9022098030000086970040B8
-:10C0F000813201002F83004005B0000000000043A2
-:10C1000061B101004000001062DD01001E90A840F6
-:10C1100081320000238300881CB00000000000056D
-:10C1200048B1010025902241197C0000E7940040AD
-:10C13000113001002690000548B10000C99400406C
-:10C14000813201002890220980300000869700404B
-:10C1500013300100D08B004005B0000014000040F7
-:10C16000439901000400A2F0146C00000080001943
-:10C1700042C9010032902240E36D000000000043FC
-:10C1800061B101004000001062DD01002E90A84066
-:10C1900081320000238300881CB0000000000005ED
-:10C1A00048B101000000004005B001003690224176
-:10C1B000197C0000E7940040113001003790000521
-:10C1C00048B10000C99400408132010008002D0AE6
-:10C1D00084B00100000000F082B00100040026409D
-:10C1E0008132000014002040E1B101003D90031EA7
-:10C1F000803200003E90004187B0000021000040E6
-:10C20000879801002C960040813201000400A25C56
-:10C210001F7C00000000005C1F9001004390220979
-:10C220008030000086970040133001004690224481
-:10C23000197C00008697004F813001000000004407
-:10C2400019800100C98BA24A1F7C0000D08B0040DE
-:10C2500081B200000400A205486D0000BA00204031
-:10C26000E5B101004E909C17803200000400224A84
-:10C27000197C0000CC000040439901003698004032
-:10C2800081320100D497004013300100C00000400B
-:10C2900043990100C4002DF082B001000B9800F01A
-:10C2A00084300100C994004081320100D08B220902
-:10C2B000803000008697004013300100D08B004092
-:10C2C00081B200002E000040439901005A902240A4
-:10C2D000E76D000032000040439901006590A240E4
-:10C2E000E56D0000F2950040813201002400200B32
-:10C2F000E0B1010028002013E0B101002200200677
-:10C30000E4B1010004002242197C00001400004046
-:10C31000439901000400A2F0803200001400200ABA
-:10C32000E0B10100D08B22098030000086970040E8
-:10C3300013300100D08B004081B20000F295004024
-:10C34000813201009D9500408132010073902241AD
-:10C35000197C00000000000B99B0010004001F15BB
-:10C360009850000073902001986C0000700000034A
-:10C3700048C9010000002E461F9001000000005037
-:10C38000F1B1010000000003F0B101000000004223
-:10C3900061B10100A00000A462DD01007090A8005E
-:10C3A000E03100000000000548B10100AC002F00A2
-:10C3B00010B0010000000001E0C1010014002F15C1
-:10C3C00010C001000400A2F0803200000000000A4A
-:10C3D00080B001000000600180D001000000004733
-:10C3E00019900100E98F2209803200008697000928
-:10C3F00080300100E98F004013B00000008000038E
-:10C4000042C90100000000F082B0010013000040AA
-:10C41000879801000000004C43C101002C9600F0F9
-:10C42000843001000400A25C1F7C0000C98B005C0A
-:10C430001F9000002C002040E7B101002D0020409B
-:10C44000E7B101002E000040439901000400A2F36F
-:10C450008032000004002242197C0000C98B004297
-:10C46000198000001C960040813201005B97004853
-:10C47000953001000000004561B10100400000104E
-:10C4800062DD01008D90A8401330000023830088F6
-:10C490001CB000009390000548B10000929000404D
-:10C4A00013B000000000000012B0010008000040BE
-:10C4B0004399010014002DF082B0010004002640D1
-:10C4C00081320000040022F084300000130000409C
-:10C4D000879801002C960040813201000400A25C84
-:10C4E0001F7C00000000005C1F900100B09000095C
-:10C4F00000B000000400A205486D0000C98B87420F
-:10C50000191000008B002F4719800100C98B0040D3
-:10C51000E79100000400A2401F7C00002F000040B3
-:10C5200047990100AE902247E77D000004002241B8
-:10C53000197C00001D940040E7310100AE902200FC
-:10C5400080320000A990A2401F7C0000C9940040E6
-:10C5500081320100AE90004081B200003000004006
-:10C560004399010032002DF294B00100A59500F22C
-:10C5700002300100AC95004B02B000000000000545
-:10C5800048B10100AF90004001B000000000004041
-:10C5900005B00100B590220080320000B490A242A4
-:10C5A000197C00000596004081320100B5900040E2
-:10C5B00081B200003C960040813201005491225C1F
-:10C5C0001F7C00000000005C1F8001000080001044
-:10C5D00042C90100BD902240E36D0000000000450B
-:10C5E00061B101004000001062DD0100BA90A84076
-:10C5F00081320000238300881CB0000054910005A4
-:10C6000048B10000B494004081320100C490A208F7
-:10C6100080320000C490A216803200000F97004DB7
-:10C62000813001000082000204DC0100F08700403C
-:10C6300081B200007400004043990100000000F83E
-:10C6400082B00100000000F084B001000000004151
-:10C6500096B00100D5902242961400000080001090
-:10C6600044C9010064006840979801006400004BD1
-:10C6700080CE01000400A64081320000000000418D
-:10C68000F0B1010000000042F0B1010070000005AF
-:10C69000E0C901000000004561B101002000001068
-:10C6A00062DD0100D190A840813200000400A25C4C
-:10C6B0001F7C00000000005C1F900100000000458E
-:10C6C00061B101004000001062DD0100D690A85C5D
-:10C6D0001F000000238300881CB000005E012D05B0
-:10C6E00048B10100DA9065F21230000000993F4233
-:10C6F00013F00100DF902247E77D00002783758853
-:10C700001CB00000D990004081B20000000000473A
-:10C71000E79101000400750996E401000080001013
-:10C7200044C9010000000044F1B10100000068A804
-:10C7300097C0010000000003E0B101000080000389
-:10C74000449901000000004461B1010000000010A4
-:10C7500062B10100E790A840E13100002383008826
-:10C760001CB0000000993F4213F00100EB906505FA
-:10C77000483100003F0000F39688010000000040AF
-:10C78000E7B101000000754081B20100F390224B37
-:10C79000803200000000005561B101000000004B34
-:10C7A00062B10100F190A840813200000000000752
-:10C7B00016B001000062000B16DC01002F000040E3
-:10C7C000439901000400A247E77D00001D9400404A
-:10C7D0008132010010912200803200004E96005FED
-:10C7E00001100100F7902240956C000004002241E6
-:10C7F000197C0000040022401F7C00000080001013
-:10C8000044C9010000000050F1B101000000000324
-:10C81000F0B101000000004261B101000000001011
-:10C8200062B101000191A800E0310000238300887B
-:10C830001CB000000000000548B1010004800003A6
-:10C8400042C90100000000F202B0010004002031E2
-:10C85000036C0000A595005295300100C99400407A
-:10C8600081320100F7902241975000000C800003B4
-:10C8700042C90100000000F000B001000000005CAF
-:10C8800001800100AC95004B02B00000F79000055C
-:10C8900048B1000066970040033001001780000394
-:10C8A00044C9010000F0000C968801000000634CB0
-:10C8B00097F001000400204D976C00000400224016
-:10C8C000976C00001080000344C90100000000AB19
-:10C8D000E1B101000097005E0510010003000007B0
-:10C8E0001AF40100070000071688010000B5000DCA
-:10C8F00046C901001C913040813200000400220B27
-:10C90000E67D00000000000BE681010000B7000D8D
-:10C9100046C901000400220BE67D00000000000B68
-:10C92000E68101001000100F94F401009304005FF1
-:10C930009504010076950040813201002A91225031
-:10C94000FD7F000026914640813200002991A240DF
-:10C95000316F000004001E4081B2000000001E4143
-:10C9600031D3010000002E0548B101000000004055
-:10C97000E1B10100000000400FB00100AB940041A4
-:10C9800081300100F087004081B20000B494004083
-:10C99000813201003D91A208803200003D91A21633
-:10C9A000803200000082000204DC0100000000452B
-:10C9B00003F001000000000100C001003591375C68
-:10C9C000613100000000001B62B101003A91284073
-:10C9D000813200000400A25C777D000036910040A7
-:10C9E00081B200000000000062B101003A91A8404D
-:10C9F00081320000F087174081B2000074002240AD
-:10CA0000F1B1010000000040E1B101005B97004A74
-:10CA1000953001000400A25C1F7C00001C96005CA5
-:10CA20001F100100C490004081B200000400A24029
-:10CA30001F7C00002F0000404799010051912247C0
-:10CA4000E77D000004002241197C00001D94004095
-:10CA5000E731010051912200803200004C91A24048
-:10CA60001F7C0000C99400408132010051910040B8
-:10CA700081B20000300000404399010032002DF2E5
-:10CA800094B00100A59500F202300100AC95004B76
-:10CA900002B000000000000548B101005B970048AB
-:10CAA000953001000400A25C1F7C00001C96005C15
-:10CAB0001F1001000400A205486D00005891874234
-:10CAC000191000008B002F47198001000000004062
-:10CAD000E79101008697004281300100C98B004038
-:10CAE00081B200001C960040813201000400A25C6B
-:10CAF0001F7C0000C98B005C1F900000B00000404C
-:10CB0000439901000400A2F080320000BA002040E6
-:10CB1000E5B10100D497004081320100C00000401F
-:10CB200043990100C4002DF082B001000B9800F081
-:10CB300084300100C994004081320100869700458D
-:10CB400081300100C98B2242197C00000F97003A06
-:10CB500081300100C98B004081B200000400004018
-:10CB600081B20000B4940040813201007091A208AB
-:10CB7000803200007091A216803200000F970047AB
-:10CB8000803001000082000204DC0100F0870040D8
-:10CB900081B200001080000344C9010000E100A63A
-:10CBA00084B0010000000040F1B10100000000402D
-:10CBB000F1B1010000006007849401000097005E5D
-:10CBC00005100100C98B004081B200008A000040BE
-:10CBD00047990100C9940041E7410100D08B004012
-:10CBE00081B200000400A205486D00000400A241CB
-:10CBF000197C00000400A2481F7C0000F295004050
-:10CC0000813201000400A30A0C6C00009D950040D5
-:10CC100081320100000000012CB00100000000156D
-:10CC200010B001000000000010C0010004001F0A45
-:10CC30002C50000014000040439901000400A2F0B1
-:10CC4000803200000000001032B00100A197000601
-:10CC5000043001008E91A2481F7C00008C91844812
-:10CC60001F100000AC000040479901008E91000A9F
-:10CC7000E0C100000000000A02B001009E93000124
-:10CC80008C3001000000004361B101004000001041
-:10CC900062DD01008F91A84081320000238300886B
-:10CCA0001CB000000000000548B1010000000002B7
-:10CCB00010C001009C91220214500000799600459A
-:10CCC0001F0001008691225C1F7C000000000047CD
-:10CCD00061B101004000001062DD01009891A85C84
-:10CCE0001F000000238300881CB00000869100050F
-:10CCF00048B100000000000B1BB0010008002D40EF
-:10CD000085B00100000000F082B00100000000408A
-:10CD100005B001002C96004187300100000000455D
-:10CD200061B101004000001062DD0100A291A84045
-:10CD300081320000238300881CB000000000000541
-:10CD400048B10100A8912209803000008697004078
-:10CD500013300100AC912244197C00008697004FEB
-:10CD600081300100AC91A2471F7C0000000000440C
-:10CD700019800100FF070008008C01000400264014
-:10CD800081320000BB91224A1F7C0000B391A216A1
-:10CD900002300000C9940040813201002F00204081
-:10CDA000E7B10100C98B004081B200002D002D08C1
-:10CDB0002AB00100B7912242197C00003C96004045
-:10CDC00081320100B891004081B200000596004018
-:10CDD0008132010030002E002AD0010032002A15D5
-:10CDE000E4B10100C98B0016E4B10000D191221614
-:10CDF000023000000400A2471F7C00000000000871
-:10CE00002AB001002B98004095300100C191A2404A
-:10CE1000116C0000D29122402D6C00000400A2058C
-:10CE2000486D0000040022441F7C0000AC0000405C
-:10CE300047990100B0002B01E0C10100002B00A6C2
-:10CE400016B0010000000001E0D101005E9700086B
-:10CE500080300100CA91005E179000007F97004368
-:10CE6000613101000000004361B101004000001089
-:10CE700062DD0100CB91A84081320000238300884D
-:10CE80001CB000000000000548B1010066970007D3
-:10CE9000161401000097005E05100100C9940040BF
-:10CEA000813201002F002040E7B10100D08B00400B
-:10CEB00081B200000000000B1BB0010004001F1530
-:10CEC0001A500000E09120161A6C00000400224065
-:10CED0001F7C00007000000348C9010000002250C0
-:10CEE000F1B1010000000003F0B1010000000000FA
-:10CEF000E0B101000000004261B10100A00000A407
-:10CF000062DD0100DD91A8461F1000000000000551
-:10CF100048B101000000000010B001000000001541
-:10CF200010C001000000000A2AB001000000000A41
-:10CF30002CD0010004001F168032000014000040B5
-:10CF4000439901000400A2F080320000AC002F40A1
-:10CF500023B00100EA9184451F100000EB91000A04
-:10CF6000E0C100000000000A02B00100BE960040CF
-:10CF700035B000000400A25C1F7C00000080001996
-:10CF800042C90100F4912240E36D0000000000431B
-:10CF900061B101004000001062DD0100F091A84085
-:10CFA00081320000238300881CB0000000000005CF
-:10CFB00048B101000592A2021A5000000A922240D4
-:10CFC0002D6C0000040022401F7C00000080001037
-:10CFD00044C9010000000050F1B10100000000034D
-:10CFE000F0B10100FF070008E08D010000000042E1
-:10CFF00061B101000000001062B10100FC91A84085
-:10D0000081320000238300881CB00000000000056E
-:10D0100048B101002F002047E7B501000C80000354
-:10D0200042C90100100000F010C80100F0070040E4
-:10D030001B9801000A92005C118000000400A25FAE
-:10D040001B7C0000FF070008988801000000000218
-:10D0500098C001000400200B996C00000000000241
-:10D0600010C0010004002240236C00000400A34310
-:10D07000236C0000E79400401F0001000000000541
-:10D0800048B101001092230D2C6C000000000040FC
-:10D090001F900100199222461F7C000000000046EC
-:10D0A0001F8001007080000342C9010019922240D4
-:10D0B000E36D00000000004261B10100400000107B
-:10D0C00062DD01001592A8408132000023830088B0
-:10D0D0001CB000000000000548B1010008002D4010
-:10D0E00085B00100000000F082B0010000000040A7
-:10D0F00005B001002C96004187300100000000457A
-:10D1000061B101004000001062DD01001E92A840E4
-:10D1100081320000238300881CB00000000000055D
-:10D1200048B1010024922209803000008697004017
-:10D130001330010028922244197C00008697004F8A
-:10D14000813001002892A2471F7C000000000044AB
-:10D1500019800100FF070008008C01000400264030
-:10D16000813200003E92224A1F7C00002F92A216BC
-:10D1700002300000C9940040813201002F0020409D
-:10D18000E7B10100C98B004081B200002D002D08DD
-:10D190002AB001003A922242197C00003392A2F395
-:10D1A00084300000000000A585B0010000000041AF
-:10D1B00085D00100D4003E4185E001003792224035
-:10D1C0001F7C00000000005A119001000B000008B5
-:10D1D000E4F501003C960040813201003B920040A2
-:10D1E00081B20000059600408132010030002E001F
-:10D1F0002AD0010032002A15E4B10100C98B0016C3
-:10D20000E4B100004192A21602300000C99400402F
-:10D21000813201009A92004081B200002D002D0859
-:10D220002AB00100549222471F7C00000400A09104
-:10D23000036C00004E922242197C00004792A2F338
-:10D2400084300000000000A585B00100000000410E
-:10D2500085D00100D4003E4185E001004B92224080
-:10D260001F7C00000000005A119001000B00000814
-:10D27000E4F50100200400408998010009990008A4
-:10D280008A30010058012D002AD0010060012DF0E4
-:10D2900010B00100000000F02CB0010000000016EA
-:10D2A00080B2010004002740116C0000878F00400D
-:10D2B00081B200000400A391036C00002B98004190
-:10D2C000953001005D92A208803200005D92A216A6
-:10D2D000803200000000004197B001005B92230DF6
-:10D2E000026C00000000004197C00100AC95004BAB
-:10D2F00002B000009A92000548B100000400A205A7
-:10D30000486D0000040022441F7C0000AC002F0187
-:10D3100014B00100B0002B01E0C10100002B00A6F9
-:10D3200016B0010004002241197C00000000000139
-:10D33000E0D101007092230D026C0000008000100B
-:10D3400044C9010000000050F1B1010000000003D9
-:10D35000F0B101000000004261B1010000000010C6
-:10D3600062B101006992A800E031000023830088C7
-:10D370001CB000000000000548B101000C80000353
-:10D3800042C90100100000F022C801000000005C4A
-:10D39000238001000000000184B001007392230D7E
-:10D3A000026C00000000000D02B001000000000847
-:10D3B00080B00100789222401B6C00005E97000153
-:10D3C0008450010081922240856C00000000000121
-:10D3D00080C001001080001046C901000000004F0D
-:10D3E0004381010000000042F0B101002000004034
-:10D3F000F0C9010000000016F0B101000000004378
-:10D4000061B10100A00000A162DD01007E92A811BF
-:10D41000E031000004002240236C00009092005E86
-:10D42000179000008492230D026C00000000000D94
-:10D4300002B001000000000184D001008992224066
-:10D440001B6C00007F9700436131010090922240E5
-:10D45000856C00000000000112C001001080001067
-:10D4600046C901000000004F438101000000004256
-:10D47000F0B1010000000009F0B101000000001847
-:10D48000F0B10100A00000A162DD01008E92A811A0
-:10D49000E03100000000004361B1010040000010D5
-:10D4A00062DD01009192A80A023000002383008807
-:10D4B0001CB00000C9940005483101009892230D6A
-:10D4C000026C0000FF070011008C0100C9940040AD
-:10D4D0008132010066970007161401000097005E74
-:10D4E000051001002F002040E7B10100D08B004063
-:10D4F00081B200000080000342C90100000000F872
-:10D5000082B001000400264081320000000000F8D3
-:10D510008CB00100000000F08EB00100EC950040DE
-:10D520001330010004000C4780320000000000406E
-:10D5300085B001002C960041873001009D95004088
-:10D540008132010004002091036C00000080001073
-:10D5500042C90100AE922240E36D00000000004588
-:10D5600061B101004000001062DD0100AA92A840F4
-:10D5700081320000238300881CB0000000000005F9
-:10D5800048B10100B0922209803000008697004027
-:10D59000133001000000000B1BB00100000000155B
-:10D5A0001AD00100B792A241197C00002B980040CC
-:10D5B000953001000000001680B20100C0922708DB
-:10D5C00080320000C19100002AC000002B98004169
-:10D5D000953001000000001680B20100BB922708C0
-:10D5E000803200005D9200002AC00000000000416F
-:10D5F00097B00100BE92230D026C000000000041B4
-:10D6000097C00100AC95004B02B00000000000057F
-:10D6100048B10100C98B2242197C00000F97003AE3
-:10D6200081300100C98B004081B200000400A24A91
-:10D630001F7C0000C592004A1F9000000400A24118
-:10D64000197C00000400A24F2B7C00000400A244BF
-:10D650001F7C00000400A2451F7C0000FF94000016
-:10D66000103001000000001510C001000000001083
-:10D6700032B00100A197000604300100D292A2440A
-:10D680001F7C00000000000B1BB001000000000A1E
-:10D690002CD001000000000A02B001009E9300019E
-:10D6A0008C3001000080001942C90100D99222404B
-:10D6B000E36D00000000004361B101004000001074
-:10D6C00062DD0100D592A8408132000023830088EA
-:10D6D0001CB000000000000548B10100000000027D
-:10D6E00010C00100E2922202145000007996004519
-:10D6F0001F000100CB92225C1F7C0000000000474D
-:10D7000061B101004000001062DD0100DE92A85C02
-:10D710001F000000238300881CB00000CB9200058E
-:10D7200048B1000008002D4085B00100000000F065
-:10D7300082B001000000004005B001002C960041BD
-:10D74000873001000000004561B101004000001079
-:10D7500062DD0100E792A840813200002383008847
-:10D760001CB000000000000548B10100ED92220944
-:10D77000803000008697004013300100F092224470
-:10D78000197C00008697004F8130010000000044A2
-:10D7900019800100FF070008008C010004002640EA
-:10D7A00081320000FF92224A1F7C0000F792A216ED
-:10D7B00002300000C9940040813201002F00204057
-:10D7C000E7B10100C98B004081B200002D002D0897
-:10D7D0002AB00100FB922242197C00003C960040D6
-:10D7E00081320100FC92004081B2000005960040A9
-:10D7F0008132010030002E002AD0010032002A15AB
-:10D80000E4B10100C98B0016E4B10000BC91A2167E
-:10D8100002300000C9940040813201002F002040F6
-:10D82000E7B10100D08B004081B20000040022412A
-:10D83000197C00000400A24F2B7C00000400A244CD
-:10D840001F7C00000400A2451F7C00000400A24AC7
-:10D850001F7C0000FF94004A1F100100D4910010AB
-:10D8600032B000008A002040E7B101000E93A241CF
-:10D87000197C0000C99400408132010011930040DE
-:10D8800081B20000A595001594300100AC95004BC5
-:10D8900002B000000000000548B1010013932242CD
-:10D8A000197C00000F97003A8130010086970045EF
-:10D8B00081300100C98B004081B2000065900045B5
-:10D8C0001F90000004002241197C00000400A247C0
-:10D8D0001F7C0000F2950040813201000400A30A81
-:10D8E0000C6C00009D95004081320100D491000134
-:10D8F0002CB0000004002241197C00000400A24862
-:10D900001F7C0000B4940040813201002C93A208D7
-:10D91000803200002C93A2168032000000820002A8
-:10D9200004DC01000000004503F0010000000001DC
-:10D9300000C001002493375C613100000000001B2F
-:10D9400062B1010029932840813200000400A25CEA
-:10D95000777D00002593004081B2000000000000A8
-:10D9600062B101002993A84081320000F08717407E
-:10D9700081B2000058012008E0B1010060012016CA
-:10D98000E0B10100F29500471F1001000400A30A56
-:10D990000C6C00009D95004081320100D491000183
-:10D9A0002CB0000004002241197C00000400A247B2
-:10D9B0001F7C0000B49400471F1001004393A2088D
-:10D9C000803200004393A216803200003F93A242AF
-:10D9D000197C00000082000204DC0100A0980040D5
-:10D9E00047990100300500418930010004002241BF
-:10D9F000197C0000A595001594300100AC95004BF2
-:10DA000002B00000F087004081B200003C96004068
-:10DA1000813201000000004B199001000F97003A7D
-:10DA200081300100F087004081B2000058012008D9
-:10DA3000E0B1010060012016E0B101000400A24F36
-:10DA40002B7C00000400A2441F7C00000400A245BF
-:10DA50001F7C0000FF94001032300100D491004080
-:10DA600013B00000B4940040813201005893A20822
-:10DA7000803200005893A21680320000008200021B
-:10DA800004DC01000000004503F00100000000017B
-:10DA900000C001005093375C613100000000001BA2
-:10DAA00062B1010055932840813200000400A25C5D
-:10DAB000777D00005193004081B20000000000001B
-:10DAC00062B101005593A84081320000F0871740F1
-:10DAD00081B200000080000342C90100000000F88C
-:10DAE00082B001000400264081320000000000F8EE
-:10DAF0008CB00100000000F08EB00100EC950040F9
-:10DB00001330010004000C47803200000000004088
-:10DB100085B001002C960041873001009D950040A2
-:10DB2000813201000400A091036C0000008000100D
-:10DB300042C901006A932240E36D000000000045E5
-:10DB400061B101004000001062DD01006693A84051
-:10DB500081320000238300881CB000000000000513
-:10DB600048B10100878F220980300000869700406D
-:10DB700013300100878F004081B200000400831E33
-:10DB8000803200000400A24F2B7C00000400A2455C
-:10DB90001F7C000014002D451F9001000400A2F01E
-:10DBA000146C00000400A001146C0000DF8F00441E
-:10DBB000199000000400A24A1F7C00007893A24143
-:10DBC000197C00000000004A1F9001007A9100407B
-:10DBD00081B200000400A2481F7C0000F295004AB8
-:10DBE0001F1001000400A30A0C6C00009D9500406A
-:10DBF00081320100D49100012CB0000004002241C8
-:10DC0000197C00000400A24F2B7C00000400A244F9
-:10DC10001F7C00000400A2451F7C0000FF94004010
-:10DC200081320100D491001032B000008B0000401E
-:10DC3000439901000400A246E77D0000659000457D
-:10DC40001F9000000000004137C3010000000041A8
-:10DC500033C301003600000102CC01000000D240B5
-:10DC600081B200008C9385178032000000009F482D
-:10DC700003D000008E939C178032000000009F4C60
-:10DC800003D000000000800134C301004080000385
-:10DC900044C901000000004AF0B101000400264020
-:10DCA0008132000000000040F1B1010000000012CC
-:10DCB000F0B10100D1940041E13101000080004346
-:10DCC00044C9010010000040F19901000000004823
-:10DCD000F0B1010000000049F0B101004000000374
-:10DCE000E0C901000000004561B1010000000043EF
-:10DCF00062B101000000A84081B200009B93004087
-:10DD000081B200002D04004089980100099900A506
-:10DD10008A300100BA002040E5B10100B0002F01B7
-:10DD20008CD0010004001FF080320000000000468B
-:10DD3000E0C10100AC002F4013B00100CC002D0168
-:10DD4000E0C10100A9939C17803200000400224A20
-:10DD5000197C00003698004081320100AB932247C5
-:10DD6000197C00000000005F13900100D497004769
-:10DD700019100100C0002D441F900100C4002DF0B7
-:10DD800082B001000B9800F084B0000090002D05D7
-:10DD900048B10100C093A24B1F7C00001594A24C17
-:10DDA0001F7C0000C0931F1CE06D0000C393A20104
-:10DDB00080320000A8002D468FB00100B9931F1CCF
-:10DDC000E06D0000B400004043990100BB9322F0D5
-:10DDD0003A6C000012941FF03A6C00000000A24060
-:10DDE00080B200000000804F8FB001008A00004028
-:10DDF0004399010013942042E76D0000BF93224035
-:10DE000080320000000080598FB00100000080586F
-:10DE10008FB00100C2932240803200000000805C7D
-:10DE20008FB001000000805B8FB00100AC000040AB
-:10DE300043990100B0002DF084B00100C793A242C5
-:10DE4000246C0000D29323F0026C0000B00000A10B
-:10DE500080CE01000400A64081320000CF93A2F0E2
-:10DE6000803200001494A242246C00001494A24159
-:10DE7000036C0000CE93A24080320000000080516D
-:10DE80008FB00100000080528FB0010014941F1267
-:10DE9000845000001494A001846C0000C0930040E2
-:10DEA00081B200008B00004043990100FD93A2461F
-:10DEB000E77D00001400004043990100EF9322F039
-:10DEC00014300000DB93200A026C0000EC93031E68
-:10DED00080320000DA93A2408032000000008044CB
-:10DEE0008FB00100000080498FB00100E093220A4A
-:10DEF000026C0000E393A241197C0000DF93A24072
-:10DF000080320000000080558FB001000000805674
-:10DF10008FB00100E293A2408032000000008043F5
-:10DF20008FB00100000080488FB0010000000001A8
-:10DF300082B001000000000A82D00100E993209124
-:10DF4000836C0000E893A2408032000026008040ED
-:10DF50008F980100270080408F980100EB93A2402A
-:10DF6000803200001F0080408F9801002000804018
-:10DF70008F980100EE93A240803200002200804082
-:10DF80008F980100230080408F98010088002D4465
-:10DF90008FB00100F893A241197C0000F593A243D1
-:10DFA0003D7C0000F593A2F2026C00000000A2404C
-:10DFB00080B20000000080498FB00100F793A240BA
-:10DFC00080320000000080438FB0010000008048D4
-:10DFD0008FB00100F593A091036C0000F3932243EE
-:10DFE0003D7C0000FC93A24080320000280080406D
-:10DFF0008F980100290080408F9801001400004094
-:10E00000439901000694A2F01430000088002D44CA
-:10E010008FB001000394A2F2026C00000000A24045
-:10E0200080B20000000080498FB00100F5932241CA
-:10E03000197C0000F3932091036C0000F5930040DD
-:10E0400081B200000A94200A026C00000994A240E8
-:10E0500080320000000080448FB001000000804941
-:10E060008FB001000F94220A026C0000E393A241DA
-:10E07000197C00000E94A240803200000000805500
-:10E080008FB00100000080568FB001001194A240B3
-:10E0900080320000000080438FB001000000804803
-:10E0A0008FB001001794004395B000001794004111
-:10E0B00095B000001794004295B0000017940044FA
-:10E0C00095B000001794004C95B00000300400405B
-:10E0D000899801000999004A8A3001005B97004045
-:10E0E000813201001C94A240803200000000804B6D
-:10E0F0008FB001000000804C8FB001000400A20529
-:10E10000486D00002D000040439901002E002FF3C0
-:10E1100084B001002294A2F39630000000008040F9
-:10E1200001B001002D002A41E7D10100D4003D419A
-:10E1300085E001000B0000F200E401002894225A5F
-:10E14000017C0000000000401F9001002994005A4B
-:10E1500001800000000000401F80010000006341BA
-:10E1600085C001002C94A0A5856C000000006340D0
-:10E1700085B001001204004089980100099900004F
-:10E180008A3001000000804081B201000000A0A59B
-:10E19000856C01000000E34085B001000C800003A5
-:10E1A00042C9010012000040879801007F9800F0EA
-:10E1B0008CB000000400225F1F7C000041942240CC
-:10E1C0000F6C000000002F0548B101000400225A26
-:10E1D0001F7C0000100000F098F401000400A2076A
-:10E1E000986C00001000000C98F401000400A207D5
-:10E1F000986C00003E94A24B197C00003F9422F0E2
-:10E20000186C00000000604B199001004395000756
-:10E21000103001002F83004005B000004394225AC3
-:10E220001F7C0000AB940040813001002F83004030
-:10E2300005B000000400225F1F7C000000002F05D5
-:10E2400048B101000000604B199001000400225AFF
-:10E250001F7C0000040022400F6C0000100000F042
-:10E2600096F401000400A207966C00001000000C58
-:10E2700096F401000400A207966C00004395000785
-:10E28000103001002F83004005B000000400225F21
-:10E290001F7C000000002F0548B101000000604B0A
-:10E2A000199001000400225A1F7C00000400224043
-:10E2B0000F6C0000100000F096F401000400A207AB
-:10E2C000966C00001000000C96F401000400A207F8
-:10E2D000966C00004395000710300100000080405C
-:10E2E00005B001005A943340813200005D94A1AD25
-:10E2F000952000006F94134081B200000000134A83
-:10E300005A8301003000394595E001000400A25F06
-:10E310005F7C00000400A25E5F7C00001F00000F15
-:10E320005ED801000000005A5F9001000000005E0E
-:10E330005F9001000000004045B0010000000004B3
-:10E3400048B00100000000054AB001000000000CC8
-:10E3500058B00100000000074EB001001C850040CD
-:10E360005D9801000400A2445F7C0000000000589A
-:10E3700061B101000000004A62B101000000A84143
-:10E3800097B000006C94004081B200000000804013
-:10E3900097B001000400A240056C00001C990040E9
-:10E3A000813201007294600796300000FFFF004B3D
-:10E3B00084890100000070C224B001007F94A2454E
-:10E3C000257C000076943120853000008094221254
-:10E3D000487F000058041112480301001000001289
-:10E3E00096E401000000004B1E9401001704004059
-:10E3F00089980100000000128AB001000999005FAD
-:10E400008B1001000000805A1F9001007F94314062
-:10E4100081320000000000B424B001008094221278
-:10E42000487F00005804004081320100170400407A
-:10E4300089980100099900128A30010000002F0517
-:10E4400048B101008F940BF08430000000001112DD
-:10E45000488301008C942250857000005E010040CA
-:10E4600043990100B49600F2963001009304001223
-:10E47000943001000000005A1F90010010000012AB
-:10E4800096E401000000804B1E9401001000004241
-:10E4900010F40100040022088032000000B73F435E
-:10E4A00011F00100070000088A880100939430A150
-:10E4B0000C30000096942245E67D000080941040C8
-:10E4C00081B2000000002A45E69101000000101210
-:10E4D000488301000400A205486D000000001140BF
-:10E4E00081B201000000604B858001005E010040A8
-:10E4F00043990100B49600F29630010000800010AC
-:10E5000044C90100D8000040819801002E002D056B
-:10E5100048B10100A2942240E76D00008000004055
-:10E5200080C8010000000040F0B1010009000008AF
-:10E5300086E40100000068A787C0010000000044D5
-:10E5400061B101000000001062B10100A694A805AD
-:10E55000E03100001000001296E401000014004BAE
-:10E5600096DC01000000804B1E9401000400225A3A
-:10E570001F7C00001000000F84F401001F00004207
-:10E5800084880100B094224080320000B19400429F
-:10E5900068B10000000000426AB10100B194315A34
-:10E5A0001F0000000400A242487F000000009142CA
-:10E5B00048930100B4943540813200006D00004062
-:10E5C00061990100BA9428B12C300000B594224D15
-:10E5D000757D0000000000402DB001000000954056
-:10E5E00011B001006D00004061990100BA94A8B11A
-:10E5F000103000000000001680B20100040027085F
-:10E60000803200000000954081B201007F00004090
-:10E6100061990100C59428B110300000BF949FBAE1
-:10E6200080320000150000408998010009990040DF
-:10E63000813201000000804011B001000400225C22
-:10E64000117C00000400A25A117C00000400220882
-:10E650004806000000008024118401000400A25C30
-:10E66000017C00000400A25A017C0000040022008A
-:10E670004806000004001FBB803200000000005F5D
-:10E6800061B101000010000062DD01000000A8403F
-:10E6900081B20000CE94004081B20000AC940040F2
-:10E6A00047990100D294324081320000DA9422F876
-:10E6B00096300000000000F890B00100000000F06B
-:10E6C00092B001000000004880B201000400274918
-:10E6D000803200000100004BF0CD01002000924884
-:10E6E000E0C901006C00004061990100DE9428B18E
-:10E6F00092300000DA94224C757D00000400124034
-:10E7000091B000006C00004061990100DE94A8B156
-:10E71000903000000000004980B20100040027484A
-:10E7200080320000FF000048968801000000004B86
-:10E7300090D001000100004BF0CD01002000004806
-:10E74000F0C9010000009249E0B101000C002D1059
-:10E7500048B10100FF070008828C01000400A25CA0
-:10E76000837C0000FF0700F0008C01000400A25C25
-:10E77000017C000004002240016C00000000A24166
-:10E7800000EC0000F094221A006C0000C994000014
-:10E79000343001000000005049C10100EA94A24158
-:10E7A000235000000000804081B201000C002D10B9
-:10E7B00048B10100FF070015828C01000400A25C33
-:10E7C000837C0000FF0700F0008C01000400A25CC5
-:10E7D000017C000004002240016C00000000A24106
-:10E7E00000EC0000FC94220D006C0000C9940000B5
-:10E7F0001A3001000000005049C10100F694A24106
-:10E80000235000000000804081B201000195831E6A
-:10E8100080320000000000441990010024002D0106
-:10E820002CB0010028002DF016B0010022002DF0C0
-:10E8300026B0010014002FF20CB001000400A2F079
-:10E84000146C000004002001146C000000008040E3
-:10E85000E1B10100300000409798010060972E4020
-:10E8600081B2010000000040F1B101000A95A2410F
-:10E870009750000064973E439DE0010000008040F7
-:10E88000E1B1010064973E439DE001000000800B70
-:10E89000E8B1010064973F439DE00100000000F0F3
-:10E8A00016C0010000008040E1B1010064973F43C1
-:10E8B0009DE00100000000F416B00100000080405F
-:10E8C000E1B1010060173D439DE00100100080A10F
-:10E8D00016E401000400A207166C00001A040040B0
-:10E8E000899801001000000B8AE401000999000DCD
-:10E8F0008A14010000B5000D42C901001D95304782
-:10E90000170400002095A20BE67D00000000904255
-:10E9100081B0010000B7000D46C901002495A20B8B
-:10E92000E67D00000000000BE69101000000904130
-:10E9300081B001000000104081B201002595400720
-:10E94000963000009D040040813201002F95A245C1
-:10E95000957C000001973F4195E00100000000F325
-:10E9600096B001000000004EE6B1010040973E4025
-:10E9700097E001000000004EE6B1010040973E40E4
-:10E980009DE001004295003BE7B100002F9530402B
-:10E99000813200003995A20BE67D000000B5000D24
-:10E9A00046C901003595A20BE67D0000000010402D
-:10E9B00081B201000000984281B0010000B7000D53
-:10E9C00046C901000000000BE69101000000104064
-:10E9D00081B201000000984181B00100040021A231
-:10E9E000952000000000104A4483010000973E413A
-:10E9F00095E001000000004EF6B101000000004E5D
-:10EA0000E6B1010040973E409DE001000000003B60
-:10EA1000E7B101000000004A90B10100FFFF0007CC
-:10EA2000928901000000984081B00100110400406B
-:10EA300089980100099900088A3001000300000844
-:10EA400086F4010000B7004346C901000700000832
-:10EA50008288010004002208803200000400224164
-:10EA6000E67D00004A954008963000009D04004075
-:10EA70008132010058952245957C00005395225A19
-:10EA80001F7C00001000000F96F401004F95315FCD
-:10EA9000970400000400A24B487F00000000114BC7
-:10EAA000489301000000004B6AB1010053953040CB
-:10EAB0008132000004002241E67D00000000004198
-:10EAC000E68101000000104081B201000000984082
-:10EAD00081B2010000973F4195E00100000000F382
-:10EAE00096B0010040973D4097E00100000063F3BD
-:10EAF00088B001006195A23B896C00000000004ACB
-:10EB000090B10100010000A692B101000400A24AE8
-:10EB1000447F00006295184A4493000000001840AA
-:10EB200081B201003F0400408998010016000012E4
-:10EB30008AE401000999004B8A140100300039452C
-:10EB400097E001000400A25F5F7C00000400225EE9
-:10EB50005F7C00001F04002F7ED901000400A64046
-:10EB6000813200006E95225A1F7C00001F04000FA6
-:10EB700098D801000000004C5E94010070950005DB
-:10EB80004AB000001F0400A75E840100000000409E
-:10EB90004BB001000000005E5F9001000400A2087D
-:10EBA0004E6C00000000005861B101000000004BF5
-:10EBB00062B101000000A84081B2000073950040DE
-:10EBC00081B20000330400408998010009990007D0
-:10EBD0008A30010078954007963000009D0400407F
-:10EBE000813201007C952245957C00000000984010
-:10EBF00081B201000400A24A447F00009B04004A45
-:10EC00004413010000973F4195E00100000000F32C
-:10EC100096B0010040973D4097E00100000063F38B
-:10EC200088B001003000384597E001000400A25F81
-:10EC30001F7C00000400225E1F7C0000040020AA4C
-:10EC40000F6C00000000005F0F90010000000058F2
-:10EC500061B101000000004B62B101008895A8403D
-:10EC6000813200007E95A23B896C0000300038455F
-:10EC70009DE001000000984081B2010004002208DC
-:10EC8000803200000300000894F4010000B7004A3D
-:10EC900046C9010007000008968801000400224BC5
-:10ECA000E67D000093040012943001004395005A61
-:10ECB0001F0001000000805A1F9001001100004A4F
-:10ECC000E6C901003000004A80CE01000400244063
-:10ECD0008132000034002F4F95840100000000F3C2
-:10ECE00096B001000100634B84C801000000A043FE
-:10ECF000856C01000000E34085B0010030002D4428
-:10ED00001F90010032002DF22AB0010004002640BD
-:10ED100081320000040022F2023000001D94001035
-:10ED20003230010004002200803200000400224240
-:10ED3000197C00003200A040E5B101000000004055
-:10ED400097B00100F0070040999801000000004AC8
-:10ED500002C001000000005003D00100000000418B
-:10ED600097C001000000A34C02D00000A99500400C
-:10ED700081B20000000000A836B00100BA9522411F
-:10ED8000035000000080001044C901000000005042
-:10ED9000F1B1010070000003F0C901000000004261
-:10EDA00061B101000000001062B10100B295A8003D
-:10EDB000E0310000238300881CB00000C9940040AB
-:10EDC000813201007C80000342C90100040022401E
-:10EDD000E16D0000000000F000B00100AD95005CA6
-:10EDE00001800000C9940040813201000000001B36
-:10EDF00010B1000068012D0682B00100000000F291
-:10EE000082C001000080000346C90100BF94004099
-:10EE100081320100E8952240116C00000000680872
-:10EE2000389601003A0400408998010009990008C9
-:10EE30008A300100F007004182CC0100BF95AA4151
-:10EE40003B400000000000F810B001000000005C32
-:10EE5000118001000400A3483B6C00000100001D6C
-:10EE600004CC0100E695264623300000080000038C
-:10EE700012C801000480000398C801000400A24CDD
-:10EE8000426D00000400A205486D0000640120F0FE
-:10EE9000E0B10100E595224105500000200000038B
-:10EEA00048C901000C0000F886C801000000224497
-:10EEB000F1B1010000000043F0B1010000000009C1
-:10EEC000E0B101000000004461B10100A00000A415
-:10EED00062DD0100D795A8461F100000E49522418D
-:10EEE00005500000E295A24123500000000000A15F
-:10EEF0001AB001000000004461B1010040000010A0
-:10EF000062DD0100DD95A8462330000023830088E0
-:10EF10001CB000001000000348C901000000000DF3
-:10EF200042B101000000004413C00100D29500501E
-:10EF300049C100000000000548B101000480000341
-:10EF40001AC801000400A205486D000000008040BE
-:10EF500081B20100E69522403B6C0000000000F801
-:10EF600000B00100C994005C01000100E895004177
-:10EF70003BD0000000008D4780320100B0002F5FC1
-:10EF800013B00100000060F08CC001007C00004064
-:10EF9000439901000400A3F08C6C00000000804045
-:10EFA00081B201000080000342C90100000000F8A6
-:10EFB00094B00100000000F88CB00100F7958CF8C7
-:10EFC0008E3000000000004419900100040022F877
-:10EFD00014300000000000F816B00100000000F836
-:10EFE00026B0010008002EF80CB001000C002A4ADF
-:10EFF000E0B1010028000000E0C901001000201B62
-:10F00000E0B101000496200A0C6C0000000000F83A
-:10F0100094B00100000000F896B00100200020F03C
-:10F02000E4B101001800204AE0B101001C00204BAF
-:10F03000E0B10100EC95004013B000000400A2050F
-:10F04000486D00002C002D42199001002E002FF376
-:10F0500082B00100000000F396B001000B96A2A55B
-:10F06000976C00000000804195B001000E96A24010
-:10F07000976C00000000004083B001002D0020408C
-:10F08000E7B101000000634197C00100D4003E4198
-:10F0900083E001000000004183C001001396A0A599
-:10F0A000836C00000000004083B001002C00204170
-:10F0B000E6B10100189622401F7C00000004000009
-:10F0C00098DC01000B00004CE4F5010019960040AB
-:10F0D0001F8000000B000000E4F501001E0400404A
-:10F0E00089980100099900008A30010000008040E1
-:10F0F00081B20100D1940040813201000080000300
-:10F1000042C9010004002240E16D000004800003B8
-:10F1100044C9010000000040F1B1010000000040BE
-:10F12000F1B101000000604187B0010000800010D3
-:10F1300044C9010000000050F1B101000000004886
-:10F14000F0B1010000000049F0B10100000000032F
-:10F15000E0B101000000004561B101002000001095
-:10F1600062DD01000000A85D0590000029960040C6
-:10F1700081B20000D1940040813201000080000380
-:10F1800044C9010000000041F0B101000400264024
-:10F190008132000000000042F0B101000000004098
-:10F1A000F1B1010000000043F0B101000080001047
-:10F1B00044C9010000000050F1B101000000004806
-:10F1C000F0B1010000000049F0B1010000000003AF
-:10F1D000E0B101000000004561B101002000001015
-:10F1E00062DD01000000A85D059000003996004036
-:10F1F00081B200000400A205486D00000400820CEA
-:10F20000803200002D000040439901002E002FF3B2
-:10F2100084B00100010063F396C8010043969F414A
-:10F2200085500000010000A585CC01002D00204282
-:10F23000E6B101000400A3A5976C0000D4003D4195
-:10F2400085E001000B0000F298E401004A9622409C
-:10F250001F7C00000400225A997C00000000005A24
-:10F26000998001000400A200986C00002004004076
-:10F2700089980100099900008A300100000080404F
-:10F2800081B2010021040040899801000999000021
-:10F290008A3001000400A2006A0600005E012D0011
-:10F2A00080B001005596524381600000020000F2D8
-:10F2B00082F4010056960041809400000000005F37
-:10F2C000819001000000005E61B10100000000407B
-:10F2D00062B101000000A84095B0000057969EBBA7
-:10F2E000803200005C96A2401F7C0000C994004060
-:10F2F00081B200000000804195B0010004000015BB
-:10F3000042C90100000000542BC00100000000FCB5
-:10F3100024B00100000000FC38B00100000000FE35
-:10F320003CB00100000000FE3AB0010071969C174D
-:10F33000803200006696A24A197C00000000804CD2
-:10F340001F9001000C00001E98F401006596A24871
-:10F35000996C00000000001542B101006596A28A78
-:10F36000F16D00000C00000102CC0100000000FC67
-:10F370003EB00100010000F428CC0100CC002D05B6
-:10F3800048B10100709620F03E6C00000000004B78
-:10F390001F9001000000004C2BC00100BF002D0594
-:10F3A00048B10100000080F33AE001000400A2052A
-:10F3B000486D00001000000C96F401000400A20744
-:10F3C000966C000000002E4B1990010007002A0CDB
-:10F3D000E4B1010000008004E6B101001800004023
-:10F3E000439901001C002DF016B0010020002DF003
-:10F3F00026B001000C002FF20CB001000000A206A4
-:10F4000014EC0000809622451F7C00000000A3063B
-:10F410002AEC0000000000F894B00100000000F0A9
-:10F4200096B001000C002D4081B2010000002A4C72
-:10F43000E1C101003000001048C901000A0000408D
-:10F44000F199010018000005F0C901000000004A10
-:10F45000F0B101000000004BE0B1010000000047E6
-:10F4600061B10100A00000A462DD01008A96A85CE1
-:10F470001F1000000000800548B101000400A295A3
-:10F48000036C000000002E1048B101004000000194
-:10F49000F0CD010040000003F0C901004000000071
-:10F4A000E0C9010000002E5049C101000000000623
-:10F4B000F1B1010000000003F0B101009596624235
-:10F4C000613100002000001062DD01009696A84026
-:10F4D000813200001000001062C901009896A80057
-:10F4E000E03100000000F24081B201000400A2956A
-:10F4F000036C000000002E1048B101004000000124
-:10F50000F0CD010040000003F0C901004000000000
-:10F51000E0C9010000002E5049C1010000000006B2
-:10F52000F1B1010000000003F0B10100A3966242B6
-:10F53000613100002000001062DD0100A496A840A7
-:10F5400081320000A00000A462DD0100A696A800A0
-:10F55000E03100000000F24081B201003080004A3A
-:10F5600044C9010000000006F1B10100C0A83D46F9
-:10F570000DE00100FF7F00A1F089010002000009F9
-:10F5800096F401000000004697E00100000060A82A
-:10F5900097C00100B0966342613100003000004A1C
-:10F5A00062C90100B196A840813200000000F3401A
-:10F5B00081B2010000993F4297F00100B596654085
-:10F5C00081320000BD9622F3740600003F0000F374
-:10F5D0009488010000000007E785010000007555D0
-:10F5E00061B101000000004A62B101000000A840C2
-:10F5F00081B20000BA96004081B200000000F540E0
-:10F6000081B20100000000A836B00100CD96824111
-:10F6100023400000C296A2441F7C00009E9300017C
-:10F620008C3001002080001042C90100C8962240A1
-:10F63000E36D00000000004361B1010040000010D4
-:10F6400062DD0100C596A840813200002383008856
-:10F650001CB000000000004123B0010000000010B9
-:10F6600032B00100CD962241197C0000E79400439E
-:10F67000233001000000004123B00100CF96A31504
-:10F680000C6C0000D096000604B0000000000015CD
-:10F6900004B00100D29620021A6C00000000000D98
-:10F6A00004B00100A197000548310100FD96220237
-:10F6B00014500000D696A2022A500000FD96A245E2
-:10F6C0001F7C0000D89622020C500000E196000238
-:10F6D00016C00000E096225C1F7C00003080001005
-:10F6E00042C90100E0962240E36D0000000000479F
-:10F6F00061B101004000001062DD0100DC96A8400D
-:10F7000081320000238300881CB000000000000547
-:10F7100048B101007996005C1F000100FD9622159A
-:10F72000803200000000005033C00100FC96A202AD
-:10F730001A500000ED9622461F7C000070800003E6
-:10F7400042C90100000000461F800100ED962240E2
-:10F75000E36D00000000004261B1010040000010B4
-:10F7600062DD0100E996A840813200002383008811
-:10F770001CB000000000000548B101000C8000032F
-:10F7800042C90100040022F080320000100000F0A5
-:10F7900010C801002F002F5C1180010000000047FD
-:10F7A000E7910100F00700401B980100BF9620156B
-:10F7B0001A6C00007000000348C9010000002250CC
-:10F7C000F1B1010000000003F0B10100FF070008E3
-:10F7D000E08D01000000004261B10100A00000A422
-:10F7E00062DD0100F996A8461F100000BF960005D3
-:10F7F00048B10000BF96000210C00000FF96A2446E
-:10F800001F7C00009E9300018C3001000000001B53
-:10F8100010B100000080001044C901000C0000403D
-:10F82000F199010010000008F0C901000000001665
-:10F83000F0B1010010000003E0C901000400A25C67
-:10F840001F7C00000000004561B101002000001095
-:10F8500062DD01000000A85C1F90000007970040D7
-:10F8600081B20000170000D0A2C901000000A24030
-:10F8700027EC00000000002000B00100C994004106
-:10F88000A34101000B97004127D00000360400403F
-:10F8900089980100099900408A3001001000000792
-:10F8A00096E401000000004B809401000000005429
-:10F8B00061B101000080004062DD01000000A8404D
-:10F8C00081B20000040014BB803200001497004095
-:10F8D00081B200000400A205486D00006A97004054
-:10F8E0002B300100AC002D0616C0010090002DF059
-:10F8F00016C401001E97A0F016440000000000414D
-:10F9000017C001000E0000A244C9010000006CF005
-:10F9100030B00100AC002D4087B0010000006CF059
-:10F9200028B001002797224A197C000000300043CC
-:10F9300086C801000030000B16C801002797A440BC
-:10F94000813200000000004117C001004A972206E2
-:10F95000803200003597A206146C000032972248CE
-:10F96000197C00002C97A0411740000000000041C6
-:10F9700017C001000000004131C0010090002018B4
-:10F98000E0B101008B002D48198001000400A24560
-:10F99000E77D00008B002045E7910100359700408E
-:10F9A0008790000008000043869801003597A04822
-:10F9B000174000000000004117C00100B0000040E7
-:10F9C0004399010010500043FCC90100AE9700307C
-:10F9D0008130010000000040E5B101004097224A5B
-:10F9E000197C0000080000A244C90100CC002DAB26
-:10F9F000F9B10100000000AB17C001003F97A0F073
-:10FA0000164400000000004117C00100449764F054
-:10FA100082B00000A4000040479901004497A2F280
-:10FA20008032000000000041E5B101008C00201888
-:10FA3000E0B101009000004045990100000060061F
-:10FA400030C001000000860C80B200000400A24912
-:10FA5000197C0000BC002D4619900100A000A0F206
-:10FA6000E4B10100B0000040439901001050004390
-:10FA7000FCC90100AE970030813001000000A24AAD
-:10FA800019FC0000080000A244C90100CC002DAB05
-:10FA9000F9B10100000000AB17C001005397A0F0BE
-:10FAA000164400000000004117C001000000E4F00F
-:10FAB00082B001000080001044C901000000004134
-:10FAC000F0B1010000000003F0B1010000000000EF
-:10FAD000F0B101000000001062B101000000A81B9D
-:10FAE000E0B100005897004081B2000000F0000C27
-:10FAF0007E8901000000A64C956001000000804A4C
-:10FB0000189401000080001044C901000400220183
-:10FB1000F031000020000040F0C901000000001694
-:10FB2000F0B101000000004361B1010020000010AD
-:10FB300062DD01000000A815E0B1000063970040FD
-:10FB400081B200001080000344C9010000000006DB
-:10FB5000F0B1010000000001F0B101000000E85F19
-:10FB60001790010070000040439901007A012EFEB9
-:10FB700092B001008B002DF616B001007097224361
-:10FB8000E77D00000000004445C10100040000A61C
-:10FB90002AB0010028006E0682C801007497224A2C
-:10FBA000197C00000000004245D1010000006E4CAD
-:10FBB00083C001000000004192C0010075974330EE
-:10FBC0003D0700000000669E83B0010000001B415D
-:10FBD0003DC301000000004192C00100060000A2E8
-:10FBE00044C901001000004998F401007E972630B6
-:10FBF000930400007E97904C92400000000000416A
-:10FC000093C00100FFFF8049ECA9010000800010B3
-:10FC100044C9010004002201F03100000000000985
-:10FC2000F0B1010000000018F0B101002000001048
-:10FC300062DD01000000A815E0B1000083970040DC
-:10FC400081B2000004002220816C000004002240E8
-:10FC5000816C00009597225F817C00009297A24002
-:10FC6000197C0000000000401990010000000054C1
-:10FC700061B101001000000796E401000000004F90
-:10FC8000979401000000004B62B101009297284058
-:10FC9000813200000400A254777D00008E9700405E
-:10FCA00081B20000250400408998010009990040B4
-:10FCB0008A3001000000A221818400009897A25F91
-:10FCC000816C00000000A243197C01000000004389
-:10FCD000199001002504004089980100099900400D
-:10FCE0008A3001000000005461B1010010000007DB
-:10FCF00096E4010000000040969401000000004BD3
-:10FD000062B101000000A84081B200000400A254CA
-:10FD1000777D00009D97004081B20000040022081A
-:10FD2000803200000400220280320000A697A24B1D
-:10FD3000FD7F0000B405000280CE01000400AA404F
-:10FD4000813200000080001944C901000400220231
-:10FD5000F03100000000000BF0B1010000000013C2
-:10FD6000F0B101000000004361B101002000001962
-:10FD700062DD01000000A808E0B10000AB97004080
-:10FD800081B200000400A205486D0000B00000A18F
-:10FD900080CE01000400A640813200007C002DF0DE
-:10FDA00084B00100020000F098F40100B797204CE5
-:10FDB000846C00008800004043990100B79720F24E
-:10FDC000846C00000000004085B0010098002D14F4
-:10FDD00082B00100000000F098B00100A3002D14D3
-:10FDE00098D00100BC97204C846C00000000004CAF
-:10FDF00084B001000400A230816C0000000000F318
-:10FE000080E00100C0972340846C000000000040A7
-:10FE100084B00100D0002014E0B101009800254218
-:10FE200080B0010000006EF380F001000000A642E7
-:10FE300082C00000C697A0401640000000000041AC
-:10FE400017C0010000009FF082EC00009800A04164
-:10FE5000E0B101000400A25C1F7C000037040040F8
-:10FE600089980100099900058A30010000000042CC
-:10FE700061B1010000002E1048B10100A80100404E
-:10FE8000F199010000000005F0B101000900000730
-:10FE900096E40100000060A797C001000000001078
-:10FEA00062B101000000A84081B20000D19700407B
-:10FEB00081B20000A8002D1C8AB0010000009FF054
-:10FEC0008AD000000000A2408BEC00008A00204095
-:10FED000E7B10100B400004047990100A4002D459E
-:10FEE000E0D10100DF979C17803200000400224A15
-:10FEF000197C0000BE002FAB83B001003C980014B9
-:10FF000082500100E497004081B20000E49722F2A1
-:10FF1000823000008C00004043990100E4979F1C50
-:10FF2000E06D0000BE000040479901003C98004091
-:10FF300081320100A800201CE0B101009C002D309E
-:10FF400081B0010088002DF084B0010094002DF2F2
-:10FF500086B00100F89723F0846C0000EC972392A0
-:10FF6000876C0000C90400A694B00100EE97004021
-:10FF700081B20000200000A694B001006089004A10
-:10FF800094980100EE9768408132000004002240FE
-:10FF9000BD7D00000000004AB0B10100BF002D424D
-:10FFA000B2B1010090002DF380E00100F397D4403E
-:10FFB00081320000000078DA84C00100FD97234000
-:10FFC000846C00009400209DE1B10100FD97004089
-:10FFD00084B00000BF002D4384C0010090002DF3C9
-:10FFE00080E00100FD972340846C00009400209D78
-:10FFF000E1B101000000004084B001000198A2F0CE
-:020000021000EC
-:10000000386C00009C002042E0B101000000005F5D
-:100010001394010000008046198001009C002042DA
-:10002000E0B101003700004043990100040000F3F3
-:1000300080F401000F0000F382880100079823413B
-:10004000806C00000000005F139401000000890C28
-:1000500080B200000400860C80320000BC0000402A
-:1000600043990100A000A0F2E4B1010000009F410B
-:1000700024EC00001398A6408132000000009F424B
-:1000800038EC00001398A64081320000B400004014
-:10009000439901001598A3F03A6C00000400A440B5
-:1000A000813200000000804081B20100B4000040B5
-:1000B00043990100199822F03A6C0000B400201D09
-:1000C000E0B1010080002D5F13940100199823F026
-:1000D0003A6C00008000201DE0B10100C000201239
-:1000E000E0B10100C400A01CE0B101002704004001
-:1000F00089980100099900428A3001000400A20594
-:10010000486D00000080000344C901000000004267
-:10011000E0B10100120000408798010025989F413E
-:10012000246C0000000000418CB0010000000012AF
-:100130008CD001002698004124B00000000000404F
-:100140008DB001007F980040813201000000004521
-:1001500061B101004000001062DD01000000A84014
-:1001600081B200002898004081B20000B4940040A1
-:10017000813201000000001680B201000000A708D3
-:10018000803201003204004089980100099900087A
-:100190008A3001003298A240956C0000C99400405A
-:1001A00081320100008200A604B00100000000407E
-:1001B0002DB00100A0982F4011B001003005004182
-:1001C00089B00000CC0000A180CE01000400A64050
-:1001D0008132000000009FF83EEC000000009F12FA
-:1001E000E0ED0000C80020ABE1B10100CC00A01F91
-:1001F000E0B101000400A205486D00003F98A35F34
-:10020000E76D000000000041E7C10100A6000040CA
-:1002100047990100539822F2863000000300004302
-:1002200084F401000100004180CC0100B8002D429F
-:1002300080D001000000624086C0010047981F4343
-:10024000803200004898A240876C000000006241A4
-:1002500087B001004C989F408032000000000040B1
-:1002600085B001000000004084D001000000004281
-:1002700080B00100000000F288B0010002000044DC
-:1002800084F40100B8002E4280D0010000006240DA
-:1002900088C0010052981F44803200005698A24046
-:1002A000896C00005698624189B0000003006241E9
-:1002B00086E40100B8000040459901000100624158
-:1002C00088E40100A4002040E5B10100A200204024
-:1002D000E7B10100BC002E4387F00100000000449C
-:1002E00086C001005C982043876C000000008043BA
-:1002F000E5B101004001004380CE01000000A443AD
-:10030000E43101004001E240879801000400A205A9
-:10031000486D00000400220A8032000088002D444D
-:1003200081B0010090002DF22EB001009C002DF054
-:1003300086B0010090002DF082B00100BA002DF0CF
-:1003400098B001006B98A212986C0000BC002DF2CE
-:1003500098B001006B98A0F2986C000000000017A4
-:1003600082B001009C002041E0B10100B4002D12D8
-:1003700086D001006E98A341E06D00006F9800F0F8
-:1003800084B000000000004184B0010080002D43D3
-:1003900084D0010072989F4280320000000000402B
-:1003A00085B001007498A342146C00007598000A8F
-:1003B0000CB00000000000420CB001007798A017BC
-:1003C0000C6C0000000080170CB001007C982240EB
-:1003D0000D6C00000000A00A0CEC0000010000F011
-:1003E00082F401007C98A0410C6C00000000A2F097
-:1003F00080320100290000408998010009990040DD
-:10040000813201000000804081B00100D1940040A1
-:1004100081320100040022038032000004800003C6
-:1004200044C9010000000046F0B101000000004096
-:10043000F1B10100000060418794010000800010CC
-:1004400044C9010000000050F1B101000000004863
-:10045000F0B1010000000049F0B10100000000030C
-:10046000E0B101000000004561B101002000001072
-:1004700062DD01000000A85D059000008B9800403F
-:1004800081B200000400A205486D00001000000CBD
-:1004900096F401000400A207966C000000002E4BA9
-:1004A0001990010005002A0CE4B10100000080044D
-:1004B000E6B101003E040040899801000999000856
-:1004C0008A3001009698454861310000001000080C
-:1004D00062DD01009C9828408730000097982248F0
-:1004E000777D000004002240276C00000A971D461B
-:1004F00087B000009F98225F117C00000400221545
-:10050000623100009D98A8408132000000009D40AB
-:1005100081B201000000004049B1010000142F4CDD
-:1005200083B0010000000040F1B10100A298A24197
-:10053000835000000000804081B2010000000040B4
-:1005400049B1010030000040A199010000000040C5
-:1005500093B00100000000401FB00100F698004970
-:10056000963001000700004906E40100003900034D
-:1005700006C801000000004005B00100200000D0C6
-:10058000A0C901000000004193C00100A998A05437
-:10059000936C000000002E0597B001000080004021
-:1005A0004999010000000040E1B10100000200A2F1
-:1005B00044C90100B298A2419750000000000020F9
-:1005C00049B30100FC980040493101000895004002
-:1005D0008132010000B52E0897B0010000000040F4
-:1005E000F1B10100B998A2419750000018000040F5
-:1005F0009798010000972E4081B201000000004052
-:10060000F1B10100BD98A2419750000000000040E8
-:1006100049B1010040182E0597B0010000000040CC
-:10062000F1B10100C198A2419750000057952040B8
-:10063000E7B101003094004045990100640000409A
-:10064000E599010056952040E7B10100B89420419A
-:10065000E5B10100BA942041E5B101009894004051
-:1006600045990100020000409798010000000040F9
-:10067000F1B10100CB98A24197500000000000406A
-:1006800097B00100000000406FB101000000004B76
-:1006900068B10100CF988541974000008004004078
-:1006A000813201000000004039B301000000004029
-:1006B00037B301000000004035B3010000000040E6
-:1006C00033B301000000004041B3010000000040CE
-:1006D0003FB30100EE050040259B010042000040B1
-:1006E0004B9B0100000000402FB3010000000040C0
-:1006F0002DB301000000004047B30100000000409E
-:1007000043B30100600000402B9B01000000005437
-:10071000EF93010000000055F1930100FFFF00A5D9
-:100720003C8B01000000002C5BB301000000002C9A
-:1007300045B301000000004059B301000000004033
-:1007400057B301000000004027B301000000004043
-:1007500053B30100EB98A250FD7F0000EB98A2512B
-:10076000FD7F0000EC9800401DB3000050460040A3
-:100770001D9B010000C000A688B30100FF3F00A63A
-:100780003AB3010000C0009D3B9B0100B40500404E
-:10079000239B0100000000404DB30100080A00A6A1
-:1007A00014B301000101008A159B01000000002024
-:1007B00087B30100008000A656B101000000805EF2
-:1007C00057B501001800004B20E401000600004B63
-:1007D00096E401000043004B96C801001800001089
-:1007E00020DC01000000004B209401000000805735
-:1007F0002190010000992E0A97B0010000000040EE
-:10080000F1B10100FD98A2419750000000030040A3
-:100810009798010000A900404599010000000040A0
-:10082000F1B101000199A241975000003000004051
-:10083000979801000000005561B101000000004BD5
-:1008400062B101000599A840813200000599A241DA
-:10085000975000000000804081B201001000004E5F
-:1008600098E4010000000007989401000000004394
-:1008700099E0010000000080989401000000004809
-:1008800099E001000000004C889401000F996A4033
-:10089000813200001299224F777D0000F004004061
-:1008A000813201000000004F61B1010000000044EE
-:1008B00062B101001399A840813200001A99224ABE
-:1008C000897C00001899224F777D0000F0040040D9
-:1008D000813201000000004562B101001899A84072
-:1008E000813200000000FA4081B201000000804027
-:1008F00081B201000400A25A1F7C00001000000F0A
-:1009000098F401000400A25F9904000000008040F8
-:1009100081B201000000804081B20100040000406B
-:1009200081B200000400004081B2000004000040D9
-:1009300081B200000400004081B2000004000040C9
-:1009400081B200000400004081B2000004000040B9
-:1009500081B200000400004081B2000004000040A9
-:1009600081B200000400004081B200000400004099
-:1009700081B200000400004081B200000400004089
-:1009800081B200000400004081B200000400004079
-:1009900081B200000400004081B200000400004069
-:1009A00081B200000400004081B200000400004059
-:1009B00081B200000400004081B200000400004049
-:1009C00081B200000400004081B200000400004039
-:1009D00081B200000400004081B200000400004029
-:1009E00081B200000400004081B200000400004019
-:1009F00081B200000400004081B200000400004009
-:100A000081B200000400004081B2000004000040F8
-:100A100081B200000400004081B2000004000040E8
-:100A200081B200000400004081B2000004000040D8
-:100A300081B200000400004081B2000004000040C8
-:100A400081B200000400004081B2000004000040B8
-:100A500081B200000400004081B2000004000040A8
-:100A600081B200000400004081B200000400004098
-:100A700081B200000400004081B200000400004088
-:100A800081B200000400004081B200000400004078
-:100A900081B200000400004081B200000400004068
-:100AA00081B200000400004081B200000400004058
-:100AB00081B200000400004081B200000400004048
-:100AC00081B200000400004081B200000400004038
-:100AD00081B200000400004081B200000400004028
-:100AE00081B200000400004081B200000400004018
-:100AF00081B200000400004081B200000400004008
-:100B000081B200000400004081B2000004000040F7
-:100B100081B200000400004081B2000004000040E7
-:100B200081B200000400004081B2000004000040D7
-:100B300081B200000400004081B2000004000040C7
-:100B400081B200000400004081B2000004000040B7
-:100B500081B200000400004081B2000004000040A7
-:100B600081B200000400004081B200000400004097
-:100B700081B200000400004081B200000400004087
-:100B800081B200000400004081B200000400004077
-:100B900081B200000400004081B200000400004067
-:100BA00081B200000400004081B200000400004057
-:100BB00081B200000400004081B200000400004047
-:100BC00081B200000400004081B200000400004037
-:100BD00081B200000400004081B200000400004027
-:100BE00081B200000400004081B200000400004017
-:100BF00081B200000400004081B200000400004007
-:100C000081B200000400004081B2000004000040F6
-:100C100081B200000400004081B2000004000040E6
-:100C200081B200000400004081B2000004000040D6
-:100C300081B200000400004081B2000004000040C6
-:100C400081B200000400004081B2000004000040B6
-:100C500081B200000400004081B2000004000040A6
-:100C600081B200000400004081B200000400004096
-:100C700081B200000400004081B200000400004086
-:100C800081B200000400004081B200000400004076
-:100C900081B200000400004081B200000400004066
-:100CA00081B200000400004081B200000400004056
-:100CB00081B200000400004081B200000400004046
-:100CC00081B200000400004081B200000400004036
-:100CD00081B200000400004081B200000400004026
-:100CE00081B200000400004081B200000400004016
-:100CF00081B200000400004081B200000400004006
-:100D000081B200000400004081B2000004000040F5
-:100D100081B200000400004081B2000004000040E5
-:100D200081B200000400004081B2000004000040D5
-:100D300081B200000400004081B2000004000040C5
-:100D400081B200000400004081B2000004000040B5
-:100D500081B200000400004081B2000004000040A5
-:100D600081B200000400004081B200000400004095
-:100D700081B200000400004081B200000400004085
-:100D800081B200000400004081B200000400004075
-:100D900081B200000400004081B200000400004065
-:100DA00081B200000400004081B200000400004055
-:100DB00081B200000400004081B200000400004045
-:100DC00081B200000400004081B200000400004035
-:100DD00081B200000400004081B200000400004025
-:100DE00081B200000400004081B200000400004015
-:100DF00081B200000400004081B200000400004005
-:100E000081B200000400004081B2000004000040F4
-:100E100081B200000400004081B2000004000040E4
-:100E200081B200000400004081B2000004000040D4
-:100E300081B200000400004081B2000004000040C4
-:100E400081B200000400004081B2000004000040B4
-:100E500081B200000400004081B2000004000040A4
-:100E600081B200000400004081B200000400004094
-:100E700081B200000400004081B200000400004084
-:100E800081B200000400004081B200000400004074
-:100E900081B200000400004081B200000400004064
-:100EA00081B200000400004081B200000400004054
-:100EB00081B200000400004081B200000400004044
-:100EC00081B200000400004081B200000400004034
-:100ED00081B200000400004081B200000400004024
-:100EE00081B200000400004081B200000400004014
-:100EF00081B200000400004081B200000400004004
-:100F000081B200000400004081B2000004000040F3
-:100F100081B200000400004081B2000004000040E3
-:100F200081B200000400004081B2000004000040D3
-:100F300081B200000400004081B2000004000040C3
-:100F400081B200000400004081B2000004000040B3
-:100F500081B200000400004081B2000004000040A3
-:100F600081B200000400004081B200000400004093
-:100F700081B200000400004081B200000400004083
-:100F800081B200000400004081B200000400004073
-:100F900081B200000400004081B200000400004063
-:100FA00081B200000400004081B200000400004053
-:100FB00081B200000400004081B200000400004043
-:100FC00081B200000400004081B200000400004033
-:100FD00081B200000400004081B200000400004023
-:100FE00081B200000400004081B200000400004013
-:100FF00081B200000400004081B200000400004003
-:1010000081B200000400004081B2000004000040F2
-:1010100081B200000400004081B2000004000040E2
-:1010200081B200000400004081B2000004000040D2
-:1010300081B200000400004081B2000004000040C2
-:1010400081B200000400004081B2000004000040B2
-:1010500081B200000400004081B2000004000040A2
-:1010600081B200000400004081B200000400004092
-:1010700081B200000400004081B200000400004082
-:1010800081B200000400004081B200000400004072
-:1010900081B200000400004081B200000400004062
-:1010A00081B200000400004081B200000400004052
-:1010B00081B200000400004081B200000400004042
-:1010C00081B200000400004081B200000400004032
-:1010D00081B200000400004081B200000400004022
-:1010E00081B200000400004081B200000400004012
-:1010F00081B200000400004081B200000400004002
-:1011000081B200000400004081B2000004000040F1
-:1011100081B200000400004081B2000004000040E1
-:1011200081B200000400004081B2000004000040D1
-:1011300081B200000400004081B2000004000040C1
-:1011400081B200000400004081B2000004000040B1
-:1011500081B200000400004081B2000004000040A1
-:1011600081B200000400004081B200000400004091
-:1011700081B200000400004081B200000400004081
-:1011800081B200000400004081B200000400004071
-:1011900081B200000400004081B200000400004061
-:1011A00081B200000400004081B200000400004051
-:1011B00081B200000400004081B200000400004041
-:1011C00081B200000400004081B200000400004031
-:1011D00081B200000400004081B200000400004021
-:1011E00081B200000400004081B200000400004011
-:1011F00081B200000400004081B200000400004001
-:1012000081B200000400004081B2000004000040F0
-:1012100081B200000400004081B2000004000040E0
-:1012200081B200000400004081B2000004000040D0
-:1012300081B200000400004081B2000004000040C0
-:1012400081B200000400004081B2000004000040B0
-:1012500081B200000400004081B2000004000040A0
-:1012600081B200000400004081B200000400004090
-:1012700081B200000400004081B200000400004080
-:1012800081B200000400004081B200000400004070
-:1012900081B200000400004081B200000400004060
-:1012A00081B200000400004081B200000400004050
-:1012B00081B200000400004081B200000400004040
-:1012C00081B200000400004081B200000400004030
-:1012D00081B200000400004081B200000400004020
-:1012E00081B200000400004081B200000400004010
-:1012F00081B200000400004081B200000400004000
-:1013000081B200000400004081B2000004000040EF
-:1013100081B200000400004081B2000004000040DF
-:1013200081B200000400004081B2000004000040CF
-:1013300081B200000400004081B2000004000040BF
-:1013400081B200000400004081B2000004000040AF
-:1013500081B200000400004081B20000040000409F
-:1013600081B200000400004081B20000040000408F
-:1013700081B200000400004081B20000040000407F
-:1013800081B200000400004081B20000040000406F
-:1013900081B200000400004081B20000040000405F
-:1013A00081B200000400004081B20000040000404F
-:1013B00081B200000400004081B20000040000403F
-:1013C00081B200000400004081B20000040000402F
-:1013D00081B200000400004081B20000040000401F
-:1013E00081B200000400004081B20000040000400F
-:1013F00081B200000400004081B2000004000040FF
-:1014000081B200000400004081B2000004000040EE
-:1014100081B200000400004081B2000004000040DE
-:1014200081B200000400004081B2000004000040CE
-:1014300081B200000400004081B2000004000040BE
-:1014400081B200000400004081B2000004000040AE
-:1014500081B200000400004081B20000040000409E
-:1014600081B200000400004081B20000040000408E
-:1014700081B200000400004081B20000040000407E
-:1014800081B200000400004081B20000040000406E
-:1014900081B200000400004081B20000040000405E
-:1014A00081B200000400004081B20000040000404E
-:1014B00081B200000400004081B20000040000403E
-:1014C00081B200000400004081B20000040000402E
-:1014D00081B200000400004081B20000040000401E
-:1014E00081B200000400004081B20000040000400E
-:1014F00081B200000400004081B2000004000040FE
-:1015000081B200000400004081B2000004000040ED
-:1015100081B200000400004081B2000004000040DD
-:1015200081B200000400004081B2000004000040CD
-:1015300081B200000400004081B2000004000040BD
-:1015400081B200000400004081B2000004000040AD
-:1015500081B200000400004081B20000040000409D
-:1015600081B200000400004081B20000040000408D
-:1015700081B200000400004081B20000040000407D
-:1015800081B200000400004081B20000040000406D
-:1015900081B200000400004081B20000040000405D
-:1015A00081B200000400004081B20000040000404D
-:1015B00081B200000400004081B20000040000403D
-:1015C00081B200000400004081B20000040000402D
-:1015D00081B200000400004081B20000040000401D
-:1015E00081B200000400004081B20000040000400D
-:1015F00081B200000400004081B2000004000040FD
-:1016000081B200000400004081B2000004000040EC
-:1016100081B200000400004081B2000004000040DC
-:1016200081B200000400004081B2000004000040CC
-:1016300081B200000400004081B2000004000040BC
-:1016400081B200000400004081B2000004000040AC
-:1016500081B200000400004081B20000040000409C
-:1016600081B200000400004081B20000040000408C
-:1016700081B200000400004081B20000040000407C
-:1016800081B200000400004081B20000040000406C
-:1016900081B200000400004081B20000040000405C
-:1016A00081B200000400004081B20000040000404C
-:1016B00081B200000400004081B20000040000403C
-:1016C00081B200000400004081B20000040000402C
-:1016D00081B200000400004081B20000040000401C
-:1016E00081B200000400004081B20000040000400C
-:1016F00081B200000400004081B2000004000040FC
-:1017000081B200000400004081B2000004000040EB
-:1017100081B200000400004081B2000004000040DB
-:1017200081B200000400004081B2000004000040CB
-:1017300081B200000400004081B2000004000040BB
-:1017400081B200000400004081B2000004000040AB
-:1017500081B200000400004081B20000040000409B
-:1017600081B200000400004081B20000040000408B
-:1017700081B200000400004081B20000040000407B
-:1017800081B200000400004081B20000040000406B
-:1017900081B200000400004081B20000040000405B
-:1017A00081B200000400004081B20000040000404B
-:1017B00081B200000400004081B20000040000403B
-:1017C00081B200000400004081B20000040000402B
-:1017D00081B200000400004081B20000040000401B
-:1017E00081B200000400004081B20000040000400B
-:1017F00081B200000400004081B2000004000040FB
-:1018000081B200000400004081B2000004000040EA
-:1018100081B200000400004081B2000004000040DA
-:1018200081B200000400004081B2000004000040CA
-:1018300081B200000400004081B2000004000040BA
-:1018400081B200000400004081B2000004000040AA
-:1018500081B200000400004081B20000040000409A
-:1018600081B200000400004081B20000040000408A
-:1018700081B200000400004081B20000040000407A
-:1018800081B200000400004081B20000040000406A
-:1018900081B200000400004081B20000040000405A
-:1018A00081B200000400004081B20000040000404A
-:1018B00081B200000400004081B20000040000403A
-:1018C00081B200000400004081B20000040000402A
-:1018D00081B200000400004081B20000040000401A
-:1018E00081B200000400004081B20000040000400A
-:1018F00081B200000400004081B2000004000040FA
-:1019000081B200000400004081B2000004000040E9
-:1019100081B200000400004081B2000004000040D9
-:1019200081B200000400004081B2000004000040C9
-:1019300081B200000400004081B2000004000040B9
-:1019400081B200000400004081B2000004000040A9
-:1019500081B200000400004081B200000400004099
-:1019600081B200000400004081B200000400004089
-:1019700081B200000400004081B200000400004079
-:1019800081B200000400004081B200000400004069
-:1019900081B200000400004081B200000400004059
-:1019A00081B200000400004081B200000400004049
-:1019B00081B200000400004081B200000400004039
-:1019C00081B200000400004081B200000400004029
-:1019D00081B200000400004081B200000400004019
-:1019E00081B200000400004081B200000400004009
-:1019F00081B200000400004081B2000004000040F9
-:101A000081B200000400004081B2000004000040E8
-:101A100081B200000400004081B2000004000040D8
-:101A200081B200000400004081B2000004000040C8
-:101A300081B200000400004081B2000004000040B8
-:101A400081B200000400004081B2000004000040A8
-:101A500081B200000400004081B200000400004098
-:101A600081B200000400004081B200000400004088
-:101A700081B200000400004081B200000400004078
-:101A800081B200000400004081B200000400004068
-:101A900081B200000400004081B200000400004058
-:101AA00081B200000400004081B200000400004048
-:101AB00081B200000400004081B200000400004038
-:101AC00081B200000400004081B200000400004028
-:101AD00081B200000400004081B200000400004018
-:101AE00081B200000400004081B200000400004008
-:101AF00081B200000400004081B2000004000040F8
-:101B000081B200000400004081B2000004000040E7
-:101B100081B200000400004081B2000004000040D7
-:101B200081B200000400004081B2000004000040C7
-:101B300081B200000400004081B2000004000040B7
-:101B400081B200000400004081B2000004000040A7
-:101B500081B200000400004081B200000400004097
-:101B600081B200000400004081B200000400004087
-:101B700081B200000400004081B200000400004077
-:101B800081B200000400004081B200000400004067
-:101B900081B200000400004081B200000400004057
-:101BA00081B200000400004081B200000400004047
-:101BB00081B200000400004081B200000400004037
-:101BC00081B200000400004081B200000400004027
-:101BD00081B200000400004081B200000400004017
-:101BE00081B200000400004081B200000400004007
-:101BF00081B200000400004081B2000004000040F7
-:101C000081B200000400004081B2000004000040E6
-:101C100081B200000400004081B2000004000040D6
-:101C200081B200000400004081B2000004000040C6
-:101C300081B200000400004081B2000004000040B6
-:101C400081B200000400004081B2000004000040A6
-:101C500081B200000400004081B200000400004096
-:101C600081B200000400004081B200000400004086
-:101C700081B200000400004081B200000400004076
-:101C800081B200000400004081B200000400004066
-:101C900081B200000400004081B200000400004056
-:101CA00081B200000400004081B200000400004046
-:101CB00081B200000400004081B200000400004036
-:101CC00081B200000400004081B200000400004026
-:101CD00081B200000400004081B200000400004016
-:101CE00081B200000400004081B200000400004006
-:101CF00081B200000400004081B2000004000040F6
-:101D000081B200000400004081B2000004000040E5
-:101D100081B200000400004081B2000004000040D5
-:101D200081B200000400004081B2000004000040C5
-:101D300081B200000400004081B2000004000040B5
-:101D400081B200000400004081B2000004000040A5
-:101D500081B200000400004081B200000400004095
-:101D600081B200000400004081B200000400004085
-:101D700081B200000400004081B200000400004075
-:101D800081B200000400004081B200000400004065
-:101D900081B200000400004081B200000400004055
-:101DA00081B200000400004081B200000400004045
-:101DB00081B200000400004081B200000400004035
-:101DC00081B200000400004081B200000400004025
-:101DD00081B200000400004081B200000400004015
-:101DE00081B200000400004081B200000400004005
-:101DF00081B200000400004081B2000004000040F5
-:101E000081B200000400004081B2000004000040E4
-:101E100081B200000400004081B2000004000040D4
-:101E200081B200000400004081B2000004000040C4
-:101E300081B200000400004081B2000004000040B4
-:101E400081B200000400004081B2000004000040A4
-:101E500081B200000400004081B200000400004094
-:101E600081B200000400004081B200000400004084
-:101E700081B200000400004081B200000400004074
-:101E800081B200000400004081B200000400004064
-:101E900081B200000400004081B200000400004054
-:101EA00081B200000400004081B200000400004044
-:101EB00081B200000400004081B200000400004034
-:101EC00081B200000400004081B200000400004024
-:101ED00081B200000400004081B200000400004014
-:101EE00081B200000400004081B200000400004004
-:101EF00081B200000400004081B2000004000040F4
-:101F000081B200000400004081B2000004000040E3
-:101F100081B200000400004081B2000004000040D3
-:101F200081B200000400004081B2000004000040C3
-:101F300081B200000400004081B2000004000040B3
-:101F400081B200000400004081B2000004000040A3
-:101F500081B200000400004081B200000400004093
-:101F600081B200000400004081B200000400004083
-:101F700081B200000400004081B200000400004073
-:101F800081B200000400004081B200000400004063
-:101F900081B200000400004081B200000400004053
-:101FA00081B200000400004081B200000400004043
-:101FB00081B200000400004081B200000400004033
-:101FC00081B200000400004081B200000400004023
-:101FD00081B200000400004081B200000400004013
-:101FE00081B200000400004081B200000400004003
-:101FF00081B200000400004081B2000004000040F3
-:1020000081B200000400004081B2000004000040E2
-:1020100081B200000400004081B2000004000040D2
-:1020200081B200000400004081B2000004000040C2
-:1020300081B200000400004081B2000004000040B2
-:1020400081B200000400004081B2000004000040A2
-:1020500081B200000400004081B200000400004092
-:1020600081B200000400004081B200000400004082
-:1020700081B200000400004081B200000400004072
-:1020800081B200000400004081B200000400004062
-:1020900081B200000400004081B200000400004052
-:1020A00081B200000400004081B200000400004042
-:1020B00081B200000400004081B200000400004032
-:1020C00081B200000400004081B200000400004022
-:1020D00081B200000400004081B200000400004012
-:1020E00081B200000400004081B200000400004002
-:1020F00081B200000400004081B2000004000040F2
-:1021000081B200000400004081B2000004000040E1
-:1021100081B200000400004081B2000004000040D1
-:1021200081B200000400004081B2000004000040C1
-:1021300081B200000400004081B2000004000040B1
-:1021400081B200000400004081B2000004000040A1
-:1021500081B200000400004081B200000400004091
-:1021600081B200000400004081B200000400004081
-:1021700081B200000400004081B200000400004071
-:1021800081B200000400004081B200000400004061
-:1021900081B200000400004081B200000400004051
-:1021A00081B200000400004081B200000400004041
-:1021B00081B200000400004081B200000400004031
-:1021C00081B200000400004081B200000400004021
-:1021D00081B200000400004081B200000400004011
-:1021E00081B200000400004081B200000400004001
-:1021F00081B200000400004081B2000004000040F1
-:1022000081B200000400004081B2000004000040E0
-:1022100081B200000400004081B2000004000040D0
-:1022200081B200000400004081B2000004000040C0
-:1022300081B200000400004081B2000004000040B0
-:1022400081B200000400004081B2000004000040A0
-:1022500081B200000400004081B200000400004090
-:1022600081B200000400004081B200000400004080
-:1022700081B200000400004081B200000400004070
-:1022800081B200000400004081B200000400004060
-:1022900081B200000400004081B200000400004050
-:1022A00081B200000400004081B200000400004040
-:1022B00081B200000400004081B200000400004030
-:1022C00081B200000400004081B200000400004020
-:1022D00081B200000400004081B200000400004010
-:1022E00081B200000400004081B200000400004000
-:1022F00081B200000400004081B2000004000040F0
-:1023000081B200000400004081B2000004000040DF
-:1023100081B200000400004081B2000004000040CF
-:1023200081B200000400004081B2000004000040BF
-:1023300081B200000400004081B2000004000040AF
-:1023400081B200000400004081B20000040000409F
-:1023500081B200000400004081B20000040000408F
-:1023600081B200000400004081B20000040000407F
-:1023700081B200000400004081B20000040000406F
-:1023800081B200000400004081B20000040000405F
-:1023900081B200000400004081B20000040000404F
-:1023A00081B200000400004081B20000040000403F
-:1023B00081B200000400004081B20000040000402F
-:1023C00081B200000400004081B20000040000401F
-:1023D00081B200000400004081B20000040000400F
-:1023E00081B200000400004081B2000004000040FF
-:1023F00081B200000400004081B2000004000040EF
-:1024000081B200000400004081B2000004000040DE
-:1024100081B200000400004081B2000004000040CE
-:1024200081B200000400004081B2000004000040BE
-:1024300081B200000400004081B2000004000040AE
-:1024400081B200000400004081B20000040000409E
-:1024500081B200000400004081B20000040000408E
-:1024600081B200000400004081B20000040000407E
-:1024700081B200000400004081B20000040000406E
-:1024800081B200000400004081B20000040000405E
-:1024900081B200000400004081B20000040000404E
-:1024A00081B200000400004081B20000040000403E
-:1024B00081B200000400004081B20000040000402E
-:1024C00081B200000400004081B20000040000401E
-:1024D00081B200000400004081B20000040000400E
-:1024E00081B200000400004081B2000004000040FE
-:1024F00081B200000400004081B2000004000040EE
-:1025000081B200000400004081B2000004000040DD
-:1025100081B200000400004081B2000004000040CD
-:1025200081B200000400004081B2000004000040BD
-:1025300081B200000400004081B2000004000040AD
-:1025400081B200000400004081B20000040000409D
-:1025500081B200000400004081B20000040000408D
-:1025600081B200000400004081B20000040000407D
-:1025700081B200000400004081B20000040000406D
-:1025800081B200000400004081B20000040000405D
-:1025900081B200000400004081B20000040000404D
-:1025A00081B200000400004081B20000040000403D
-:1025B00081B200000400004081B20000040000402D
-:1025C00081B200000400004081B20000040000401D
-:1025D00081B200000400004081B20000040000400D
-:1025E00081B200000400004081B2000004000040FD
-:1025F00081B200000400004081B2000004000040ED
-:1026000081B200000400004081B2000004000040DC
-:1026100081B200000400004081B2000004000040CC
-:1026200081B200000400004081B2000004000040BC
-:1026300081B200000400004081B2000004000040AC
-:1026400081B200000400004081B20000040000409C
-:1026500081B200000400004081B20000040000408C
-:1026600081B200000400004081B20000040000407C
-:1026700081B200000400004081B20000040000406C
-:1026800081B200000400004081B20000040000405C
-:1026900081B200000400004081B20000040000404C
-:1026A00081B200000400004081B20000040000403C
-:1026B00081B200000400004081B20000040000402C
-:1026C00081B200000400004081B20000040000401C
-:1026D00081B200000400004081B20000040000400C
-:1026E00081B200000400004081B2000004000040FC
-:1026F00081B200000400004081B2000004000040EC
-:1027000081B200000400004081B2000004000040DB
-:1027100081B200000400004081B2000004000040CB
-:1027200081B200000400004081B2000004000040BB
-:1027300081B200000400004081B2000004000040AB
-:1027400081B200000400004081B20000040000409B
-:1027500081B200000400004081B20000040000408B
-:1027600081B200000400004081B20000040000407B
-:1027700081B200000400004081B20000040000406B
-:1027800081B200000400004081B20000040000405B
-:1027900081B200000400004081B20000040000404B
-:1027A00081B200000400004081B20000040000403B
-:1027B00081B200000400004081B20000040000402B
-:1027C00081B200000400004081B20000040000401B
-:1027D00081B200000400004081B20000040000400B
-:1027E00081B200000400004081B2000004000040FB
-:1027F00081B200000400004081B2000004000040EB
-:1028000081B200000400004081B2000004000040DA
-:1028100081B200000400004081B2000004000040CA
-:1028200081B200000400004081B2000004000040BA
-:1028300081B200000400004081B2000004000040AA
-:1028400081B200000400004081B20000040000409A
-:1028500081B200000400004081B20000040000408A
-:1028600081B200000400004081B20000040000407A
-:1028700081B200000400004081B20000040000406A
-:1028800081B200000400004081B20000040000405A
-:1028900081B200000400004081B20000040000404A
-:1028A00081B200000400004081B20000040000403A
-:1028B00081B200000400004081B20000040000402A
-:1028C00081B200000400004081B20000040000401A
-:1028D00081B200000400004081B20000040000400A
-:1028E00081B200000400004081B2000004000040FA
-:1028F00081B200000400004081B2000004000040EA
-:1029000081B200000400004081B2000004000040D9
-:1029100081B200000400004081B2000004000040C9
-:1029200081B200000400004081B2000004000040B9
-:1029300081B200000400004081B2000004000040A9
-:1029400081B200000400004081B200000400004099
-:1029500081B200000400004081B200000400004089
-:1029600081B200000400004081B200000400004079
-:1029700081B200000400004081B200000400004069
-:1029800081B200000400004081B200000400004059
-:1029900081B200000400004081B200000400004049
-:1029A00081B200000400004081B200000400004039
-:1029B00081B200000400004081B200000400004029
-:1029C00081B200000400004081B200000400004019
-:1029D00081B200000400004081B200000400004009
-:1029E00081B200000400004081B2000004000040F9
-:1029F00081B200000400004081B2000004000040E9
-:102A000081B200000400004081B2000004000040D8
-:102A100081B200000400004081B2000004000040C8
-:102A200081B200000400004081B2000004000040B8
-:102A300081B200000400004081B2000004000040A8
-:102A400081B200000400004081B200000400004098
-:102A500081B200000400004081B200000400004088
-:102A600081B200000400004081B200000400004078
-:102A700081B200000400004081B200000400004068
-:102A800081B200000400004081B200000400004058
-:102A900081B200000400004081B200000400004048
-:102AA00081B200000400004081B200000400004038
-:102AB00081B200000400004081B200000400004028
-:102AC00081B200000400004081B200000400004018
-:102AD00081B200000400004081B200000400004008
-:102AE00081B200000400004081B2000004000040F8
-:102AF00081B200000400004081B2000004000040E8
-:102B000081B200000400004081B2000004000040D7
-:102B100081B200000400004081B2000004000040C7
-:102B200081B200000400004081B2000004000040B7
-:102B300081B200000400004081B2000004000040A7
-:102B400081B200000400004081B200000400004097
-:102B500081B200000400004081B200000400004087
-:102B600081B200000400004081B200000400004077
-:102B700081B200000400004081B200000400004067
-:102B800081B200000400004081B200000400004057
-:102B900081B200000400004081B200000400004047
-:102BA00081B200000400004081B200000400004037
-:102BB00081B200000400004081B200000400004027
-:102BC00081B200000400004081B200000400004017
-:102BD00081B200000400004081B200000400004007
-:102BE00081B200000400004081B2000004000040F7
-:102BF00081B200000400004081B2000004000040E7
-:102C000081B200000400004081B2000004000040D6
-:102C100081B200000400004081B2000004000040C6
-:102C200081B200000400004081B2000004000040B6
-:102C300081B200000400004081B2000004000040A6
-:102C400081B200000400004081B200000400004096
-:102C500081B200000400004081B200000400004086
-:102C600081B200000400004081B200000400004076
-:102C700081B200000400004081B200000400004066
-:102C800081B200000400004081B200000400004056
-:102C900081B200000400004081B200000400004046
-:102CA00081B200000400004081B200000400004036
-:102CB00081B200000400004081B200000400004026
-:102CC00081B200000400004081B200000400004016
-:102CD00081B200000400004081B200000400004006
-:102CE00081B200000400004081B2000004000040F6
-:102CF00081B200000400004081B2000004000040E6
-:102D000081B200000400004081B2000004000040D5
-:102D100081B200000400004081B2000004000040C5
-:102D200081B200000400004081B2000004000040B5
-:102D300081B200000400004081B2000004000040A5
-:102D400081B200000400004081B200000400004095
-:102D500081B200000400004081B200000400004085
-:102D600081B200000400004081B200000400004075
-:102D700081B200000400004081B200000400004065
-:102D800081B200000400004081B200000400004055
-:102D900081B200000400004081B200000400004045
-:102DA00081B200000400004081B200000400004035
-:102DB00081B200000400004081B200000400004025
-:102DC00081B200000400004081B200000400004015
-:102DD00081B200000400004081B200000400004005
-:102DE00081B200000400004081B2000004000040F5
-:102DF00081B200000400004081B2000004000040E5
-:102E000081B200000400004081B2000004000040D4
-:102E100081B200000400004081B2000004000040C4
-:102E200081B200000400004081B2000004000040B4
-:102E300081B200000400004081B2000004000040A4
-:102E400081B200000400004081B200000400004094
-:102E500081B200000400004081B200000400004084
-:102E600081B200000400004081B200000400004074
-:102E700081B200000400004081B200000400004064
-:102E800081B200000400004081B200000400004054
-:102E900081B200000400004081B200000400004044
-:102EA00081B200000400004081B200000400004034
-:102EB00081B200000400004081B200000400004024
-:102EC00081B200000400004081B200000400004014
-:102ED00081B200000400004081B200000400004004
-:102EE00081B200000400004081B2000004000040F4
-:102EF00081B200000400004081B2000004000040E4
-:102F000081B200000400004081B2000004000040D3
-:102F100081B200000400004081B2000004000040C3
-:102F200081B200000400004081B2000004000040B3
-:102F300081B200000400004081B2000004000040A3
-:102F400081B200000400004081B200000400004093
-:102F500081B200000400004081B200000400004083
-:102F600081B200000400004081B200000400004073
-:102F700081B200000400004081B200000400004063
-:102F800081B200000400004081B200000400004053
-:102F900081B200000400004081B200000400004043
-:102FA00081B200000400004081B200000400004033
-:102FB00081B200000400004081B200000400004023
-:102FC00081B200000400004081B200000400004013
-:102FD00081B200000400004081B200000400004003
-:102FE00081B200000400004081B2000004000040F3
-:102FF00081B200000400004081B2000004000040E3
-:1030000081B200000400004081B2000004000040D2
-:1030100081B200000400004081B2000004000040C2
-:1030200081B200000400004081B2000004000040B2
-:1030300081B200000400004081B2000004000040A2
-:1030400081B200000400004081B200000400004092
-:1030500081B200000400004081B200000400004082
-:1030600081B200000400004081B200000400004072
-:1030700081B200000400004081B200000400004062
-:1030800081B200000400004081B200000400004052
-:1030900081B200000400004081B200000400004042
-:1030A00081B200000400004081B200000400004032
-:1030B00081B200000400004081B200000400004022
-:1030C00081B200000400004081B200000400004012
-:1030D00081B200000400004081B200000400004002
-:1030E00081B200000400004081B2000004000040F2
-:1030F00081B200000400004081B2000004000040E2
-:1031000081B200000400004081B2000004000040D1
-:1031100081B200000400004081B2000004000040C1
-:1031200081B200000400004081B2000004000040B1
-:1031300081B200000400004081B2000004000040A1
-:1031400081B200000400004081B200000400004091
-:1031500081B200000400004081B200000400004081
-:1031600081B200000400004081B200000400004071
-:1031700081B200000400004081B200000400004061
-:1031800081B200000400004081B200000400004051
-:1031900081B200000400004081B200000400004041
-:1031A00081B200000400004081B200000400004031
-:1031B00081B200000400004081B200000400004021
-:1031C00081B200000400004081B200000400004011
-:1031D00081B200000400004081B200000400004001
-:1031E00081B200000400004081B2000004000040F1
-:1031F00081B200000400004081B2000004000040E1
-:1032000081B200000400004081B2000004000040D0
-:1032100081B200000400004081B2000004000040C0
-:1032200081B200000400004081B2000004000040B0
-:1032300081B200000400004081B2000004000040A0
-:1032400081B200000400004081B200000400004090
-:1032500081B200000400004081B200000400004080
-:1032600081B200000400004081B200000400004070
-:1032700081B200000400004081B200000400004060
-:1032800081B200000400004081B200000400004050
-:1032900081B200000400004081B200000400004040
-:1032A00081B200000400004081B200000400004030
-:1032B00081B200000400004081B200000400004020
-:1032C00081B200000400004081B200000400004010
-:1032D00081B200000400004081B200000400004000
-:1032E00081B200000400004081B2000004000040F0
-:1032F00081B200000400004081B2000004000040E0
-:1033000081B200000400004081B2000004000040CF
-:1033100081B200000400004081B2000004000040BF
-:1033200081B200000400004081B2000004000040AF
-:1033300081B200000400004081B20000040000409F
-:1033400081B200000400004081B20000040000408F
-:1033500081B200000400004081B20000040000407F
-:1033600081B200000400004081B20000040000406F
-:1033700081B200000400004081B20000040000405F
-:1033800081B200000400004081B20000040000404F
-:1033900081B200000400004081B20000040000403F
-:1033A00081B200000400004081B20000040000402F
-:1033B00081B200000400004081B20000040000401F
-:1033C00081B200000400004081B20000040000400F
-:1033D00081B200000400004081B2000004000040FF
-:1033E00081B200000400004081B2000004000040EF
-:1033F00081B200000400004081B2000004000040DF
-:1034000081B200000400004081B2000004000040CE
-:1034100081B200000400004081B2000004000040BE
-:1034200081B200000400004081B2000004000040AE
-:1034300081B200000400004081B20000040000409E
-:1034400081B200000400004081B20000040000408E
-:1034500081B200000400004081B20000040000407E
-:1034600081B200000400004081B20000040000406E
-:1034700081B200000400004081B20000040000405E
-:1034800081B200000400004081B20000040000404E
-:1034900081B200000400004081B20000040000403E
-:1034A00081B200000400004081B20000040000402E
-:1034B00081B200000400004081B20000040000401E
-:1034C00081B200000400004081B20000040000400E
-:1034D00081B200000400004081B2000004000040FE
-:1034E00081B200000400004081B2000004000040EE
-:1034F00081B200000400004081B2000004000040DE
-:1035000081B200000400004081B2000004000040CD
-:1035100081B200000400004081B2000004000040BD
-:1035200081B200000400004081B2000004000040AD
-:1035300081B200000400004081B20000040000409D
-:1035400081B200000400004081B20000040000408D
-:1035500081B200000400004081B20000040000407D
-:1035600081B200000400004081B20000040000406D
-:1035700081B200000400004081B20000040000405D
-:1035800081B200000400004081B20000040000404D
-:1035900081B200000400004081B20000040000403D
-:1035A00081B200000400004081B20000040000402D
-:1035B00081B200000400004081B20000040000401D
-:1035C00081B200000400004081B20000040000400D
-:1035D00081B200000400004081B2000004000040FD
-:1035E00081B200000400004081B2000004000040ED
-:1035F00081B200000400004081B2000004000040DD
-:1036000081B200000400004081B2000004000040CC
-:1036100081B200000400004081B2000004000040BC
-:1036200081B200000400004081B2000004000040AC
-:1036300081B200000400004081B20000040000409C
-:1036400081B200000400004081B20000040000408C
-:1036500081B200000400004081B20000040000407C
-:1036600081B200000400004081B20000040000406C
-:1036700081B200000400004081B20000040000405C
-:1036800081B200000400004081B20000040000404C
-:1036900081B200000400004081B20000040000403C
-:1036A00081B200000400004081B20000040000402C
-:1036B00081B200000400004081B20000040000401C
-:1036C00081B200000400004081B20000040000400C
-:1036D00081B200000400004081B2000004000040FC
-:1036E00081B200000400004081B2000004000040EC
-:1036F00081B200000400004081B2000004000040DC
-:1037000081B200000400004081B2000004000040CB
-:1037100081B200000400004081B2000004000040BB
-:1037200081B200000400004081B2000004000040AB
-:1037300081B200000400004081B20000040000409B
-:1037400081B200000400004081B20000040000408B
-:1037500081B200000400004081B20000040000407B
-:1037600081B200000400004081B20000040000406B
-:1037700081B200000400004081B20000040000405B
-:1037800081B200000400004081B20000040000404B
-:1037900081B200000400004081B20000040000403B
-:1037A00081B200000400004081B20000040000402B
-:1037B00081B200000400004081B20000040000401B
-:1037C00081B200000400004081B20000040000400B
-:1037D00081B200000400004081B2000004000040FB
-:1037E00081B200000400004081B2000004000040EB
-:1037F00081B200000400004081B2000004000040DB
-:1038000081B200000400004081B2000004000040CA
-:1038100081B200000400004081B2000004000040BA
-:1038200081B200000400004081B2000004000040AA
-:1038300081B200000400004081B20000040000409A
-:1038400081B200000400004081B20000040000408A
-:1038500081B200000400004081B20000040000407A
-:1038600081B200000400004081B20000040000406A
-:1038700081B200000400004081B20000040000405A
-:1038800081B200000400004081B20000040000404A
-:1038900081B200000400004081B20000040000403A
-:1038A00081B200000400004081B20000040000402A
-:1038B00081B200000400004081B20000040000401A
-:1038C00081B200000400004081B20000040000400A
-:1038D00081B200000400004081B2000004000040FA
-:1038E00081B200000400004081B2000004000040EA
-:1038F00081B200000400004081B2000004000040DA
-:1039000081B200000400004081B2000004000040C9
-:1039100081B200000400004081B2000004000040B9
-:1039200081B200000400004081B2000004000040A9
-:1039300081B200000400004081B200000400004099
-:1039400081B200000400004081B200000400004089
-:1039500081B200000400004081B200000400004079
-:1039600081B200000400004081B200000400004069
-:1039700081B200000400004081B200000400004059
-:1039800081B200000400004081B200000400004049
-:1039900081B200000400004081B200000400004039
-:1039A00081B200000400004081B200000400004029
-:1039B00081B200000400004081B200000400004019
-:1039C00081B200000400004081B200000400004009
-:1039D00081B200000400004081B2000004000040F9
-:1039E00081B200000400004081B2000004000040E9
-:1039F00081B200000400004081B2000004000040D9
-:103A000081B200000400004081B2000004000040C8
-:103A100081B200000400004081B2000004000040B8
-:103A200081B200000400004081B2000004000040A8
-:103A300081B200000400004081B200000400004098
-:103A400081B200000400004081B200000400004088
-:103A500081B200000400004081B200000400004078
-:103A600081B200000400004081B200000400004068
-:103A700081B200000400004081B200000400004058
-:103A800081B200000400004081B200000400004048
-:103A900081B200000400004081B200000400004038
-:103AA00081B200000400004081B200000400004028
-:103AB00081B200000400004081B200000400004018
-:103AC00081B200000400004081B200000400004008
-:103AD00081B200000400004081B2000004000040F8
-:103AE00081B200000400004081B2000004000040E8
-:103AF00081B200000400004081B2000004000040D8
-:103B000081B200000400004081B2000004000040C7
-:103B100081B200000400004081B2000004000040B7
-:103B200081B200000400004081B2000004000040A7
-:103B300081B200000400004081B200000400004097
-:103B400081B200000400004081B200000400004087
-:103B500081B200000400004081B200000400004077
-:103B600081B200000400004081B200000400004067
-:103B700081B200000400004081B200000400004057
-:103B800081B200000400004081B200000400004047
-:103B900081B200000400004081B200000400004037
-:103BA00081B200000400004081B200000400004027
-:103BB00081B200000400004081B200000400004017
-:103BC00081B200000400004081B200000400004007
-:103BD00081B200000400004081B2000004000040F7
-:103BE00081B200000400004081B2000004000040E7
-:103BF00081B200000400004081B2000004000040D7
-:103C000081B200000400004081B2000004000040C6
-:103C100081B200000400004081B2000004000040B6
-:103C200081B200000400004081B2000004000040A6
-:103C300081B200000400004081B200000400004096
-:103C400081B200000400004081B200000400004086
-:103C500081B200000400004081B200000400004076
-:103C600081B200000400004081B200000400004066
-:103C700081B200000400004081B200000400004056
-:103C800081B200000400004081B200000400004046
-:103C900081B200000400004081B200000400004036
-:103CA00081B200000400004081B200000400004026
-:103CB00081B200000400004081B200000400004016
-:103CC00081B200000400004081B200000400004006
-:103CD00081B200000400004081B2000004000040F6
-:103CE00081B200000400004081B2000004000040E6
-:103CF00081B200000400004081B2000004000040D6
-:103D000081B200000400004081B2000004000040C5
-:103D100081B200000400004081B2000004000040B5
-:103D200081B200000400004081B2000004000040A5
-:103D300081B200000400004081B200000400004095
-:103D400081B200000400004081B200000400004085
-:103D500081B20000AE9F00889AB00000AE9F00883C
-:103D60009AB00000AE9F00889AB00000AE9F008815
-:103D70009AB00000AE9F00889AB000000000008852
-:103D80009AB00100AE9F414081320000B29F2240B4
-:103D90007B6F00000000194081B20100AE9F00401F
-:103DA00081B20000000019417BB30100000000A4B3
-:103DB000C4B30100000000A1C6B3010000002FA29F
-:103DC000C8B301000814004049990100A89F004DA4
-:103DD0009ACC0100BB9F2640813200000000004CBD
-:103DE00049C10100B99FA2419B500000BF9F808044
-:103DF0008032000000005249FD9301000000004A9B
-:103E0000FD930100C29F0042CD9300000000514A83
-:103E1000FD93010000000049FD930100C29F004393
-:103E2000CB9300000000504081B20100D29F0040BF
-:103E300019990100000000F09AB001000000004450
-:103E400049D10100000040F080B201000000414D66
-:103E500080B20100CA9F00401999010000004C4047
-:103E600081B201000000004449D10100000000F0CF
-:103E70009AB001000000004D10B10000000000E207
-:103E800049B10100000000E343B10100000000E47B
-:103E900045B10100000000407BB301000000484F25
-:103EA00040B10100D29F004081B2000004000040F8
-:103EB00081B200000400004081B200000400004014
-:103EC00081B200000400004081B200000400004004
-:103ED00081B20000040000CB81C8010022830040B1
-:103EE000F29300005582004081B20000400500407E
-:103EF00081B200001806004081B200002283004019
-:103F000081B20000C682004081B2000043810040BF
-:103F100081B200004181004081B20000B8800040C1
-:103F200081B20000F087004081B20000238300408E
-:103F300081B200002783004081B20000BF9400409E
-:103F400081B200009498004081B200007F9400404C
-:103F500081B200007F98004081B200008D95004042
-:103F600081B200001695004081B20000109500401B
-:103F700081B20000B182004081B20000209900406F
-:103F800081B200000400004081B200000400004043
-:103F900081B200000400004081B200000400004033
-:103FA00081B200000400004081B200000400004023
-:103FB00081B200000400004081B200000400004013
-:103FC00081B200000400004081B200000400004003
-:103FD00081B200000400004081B2000004000040F3
-:103FE00081B200000400004081B2000004000040E3
-:103FF00081B200000400004081B2000004000040D3
-:1040000081B200000400004081B2000004000040C2
-:0440100081B2000079
-:00000001FF
+++ /dev/null
-:1000000002000000004000000000010000000000AD
-:10001000008000001500004081B200001B0000407D
-:1000200081B200002100004081B2000003000040C6
-:1000300081B20000000000A898B001000480A24036
-:10004000FD7F00000900A249DD7D00000000004C9A
-:1000500080B2010007000040D1B100000000004C58
-:1000600080B201000900A240757D000060000040E0
-:10007000619901000B00A8B17E3100000900004029
-:1000800081B2000000808F981831000010000098A5
-:1000900080E40100000041988094010000000040CD
-:1000A00081B201001000009880E401000E00409829
-:1000B000809400001100004081B200000000004068
-:1000C000A59901001900294081320000190014BCD3
-:1000D000803200000E0093BC8032000000005040CF
-:1000E00081B201000080004081B200001000004099
-:1000F000A59901001F002940813200001F0014BC97
-:1001000080320000120093BC80320000000050409A
-:1001100081B201000180004081B200002000004057
-:10012000A59901002500294081320000250014BC5A
-:1001300080320000140093BC8032000000000049AF
-:10014000DD810100120100408132010033010040D5
-:10015000813201002A0014BC80320000FE0013BC72
-:10016000803200005495004045990100FFFF004097
-:10017000E599010000002F4049B101000000004056
-:10018000E1B1010000000040FDB3010000000040AB
-:10019000FFB30100330018EE803200000000005071
-:1001A00089B001003200A24189500000990000404E
-:1001B000813201003094004043990100000000F8B2
-:1001C00020B10100000000FAE0B30100390098EE10
-:1001D00080320000000000FB80B001003B0080F393
-:1001E000DE33000000000047FD9301003E0083F372
-:1001F00080320000F00000F38088010001800040A0
-:100200002EDD0100009400404399010000000046EB
-:1002100043C10100000000FA24B101007C0018EE87
-:1002200080320000450095E880320000FFFF00E8C2
-:10023000808801007C0026408132000000000040E0
-:10024000D5990100000000F2ECB30100000000F8B5
-:10025000D6B1010008000040D5990100000000F06F
-:10026000D6B10100FF0000F8EE8B0100080100404C
-:10027000D5990100FF0000F0808C0100000000F71C
-:100280008194010000000040D6B10100FF0000F899
-:10029000808801003C000040D5990100FF0000F07B
-:1002A000D68D0100FFFF00F0F0DB010000000048E8
-:1002B00081E00100000000F8819401003C01004051
-:1002C000D599010000000040D6B10100FF0000F800
-:1002D000808801000000004881E00100000000F873
-:1002E000819401003C020040D599010000000040CB
-:1002F000D6B101002C000040D5990100000000F8A3
-:10030000D6B101001E0000F082F40100FF3F00F8AA
-:1003100080D80100640026408132000000000041C6
-:1003200081D00100FFFF004080D8010000000041A3
-:100330008094010000000040D8B10100680022FA5A
-:10034000803000000000004C81E00100010000400E
-:1003500080CC010000000040DEB10100000100403F
-:10036000D5990100100000FA80E40100000000F6B9
-:100370008194010000000040D6B10100000200405D
-:10038000D5990100100000FA80E40100000000F699
-:100390008194010000000040D6B101000600004039
-:1003A000D5990100100000FBD6E5010007000040D0
-:1003B000D5990100180000FBD6E501004800004077
-:1003C000D5990100100000FAD6E501005000004068
-:1003D000D5990100100000FBD6E50100030000FBE9
-:1003E0007A890100000000F0DCB101007C00004CC3
-:1003F000DD9100007C0095E88430000000002FE9CA
-:10040000FAB3010000000040D1B10100FF0000423A
-:10041000808801003400004080CE01007C00A640AE
-:1004200081320000850000408132010002802240BC
-:10043000803200007C00004081B200000000004FCC
-:1004400081B001008E0009F9813200008C0008F9AA
-:100450008132000098001FFDF93300008B009EFDE3
-:10046000813200000000004AF39301000000804840
-:10047000F3930100000000FDF7B301000000804984
-:10048000F3930100000000FC19B1010093000AF988
-:1004900081320000000040FB81B20100000041FDFC
-:1004A00081B20100000780F9F38F0100000742F9D3
-:1004B000F38F01009700A2FFF76F00000000434098
-:1004C00081B201000000A2FFFBEF0000000080FCF1
-:1004D000E1B101000000804081B0010000940040C3
-:1004E00047990100BB000040813201000000A24694
-:1004F000FD7F01000094004047990100CE000040BC
-:10050000813201000000A244FD7F01000094004000
-:100510004599010000000040F1B10100FF7F00405B
-:10052000F5990100FF7F0040F59901009A13004002
-:10053000F599010007000040F59901000100004015
-:10054000F599010000020040F59901000200004009
-:10055000F599010000020040F599010003010040F7
-:10056000F599010000000040F59901009A13004040
-:10057000F59901000B000040F59901008000004052
-:10058000F599010000000040F599010000000040CD
-:10059000F599010007000040F599010008000040AE
-:1005A000F5990100B0020040F599010000000040FB
-:1005B000F599010000000040F59901000229004072
-:1005C000F599010000000040F59901000067004026
-:1005D000F599010000000040F599010080000040FD
-:1005E000F599010000008040F599010000000045E8
-:1005F000FD83010000000046FD830100FF7F0040F5
-:1006000025990100C4000040813201000000A2448D
-:1006100080B2000000000045FD930100E2000040B0
-:10062000833001000000A2458032010000008046B6
-:10063000FD9301000010004083980100DD000040A0
-:100640002B3101000000A24688B0000000000041EC
-:1006500089B00100000000948CB00100FFFF00464B
-:1006600080880100A5A5A24080CE000000000048BF
-:100670008DF00100C90082418940000000008040E7
-:1006800089B0010000000044FD830100D400004057
-:10069000813201000000A24480B20000E2000008A4
-:1006A000833001000000A245803201000000804438
-:1006B000FD93010000300008839801008000004095
-:1006C0002B990100DB000040893001000000A246A8
-:1006D00080B20000FFFF009480880100A5A5A24021
-:1006E000804E01000000804389B001000384004176
-:1006F0002C990100DE00004081B200000388004117
-:100700002C990100000000208DB0010000009F9690
-:1007100080B20000DF00A2418D5000000000804048
-:1007200081B20100FF7F0040259901000000004CCC
-:1007300089E00100DD000044821401000000909473
-:100740008AB0000000000045F0B101001000004533
-:1007500088F401000000004489D00100DD0000445D
-:100760002B410100EC00084180320000ED000094B4
-:1007700024B100001000009424F501000000009452
-:10078000F0B10100F200A04489500000DD000044F7
-:100790002B41010000000094F0B10100EF00204463
-:1007A000895000001000004588F40100000000FAA4
-:1007B0008AB001000000A34289D00000F700A0FA2F
-:1007C0008A400000000000418BC00100F500A342F8
-:1007D00089500000FFFF0045888801001000004597
-:1007E0008AF40100FC0090448A40000000000041AF
-:1007F0008BC00100FFFF00458AA801000000805067
-:100800008BE00100FF7F0040259901007C00004043
-:100810002B9901000030004083980100DD000008A2
-:1008200083140100000000942AB101000080004000
-:10083000F99B0100DD0000FC19310100000040942B
-:1008400080B20100DD0000442B4101000000419412
-:1008500080B2010000000041F9C301000000004423
-:100860002BC1010004019F948032000002800040EF
-:1008700081B200001001005193B000001001004D42
-:1008800093B000001001004993B000000000004246
-:1008900093B001001001A24193500000000080407D
-:1008A00081B201000000104081B20100000011403F
-:1008B00081B201000000124081B20100000013402B
-:1008C00081B201000000144081B201000000154017
-:1008D00081B201000000164081B201000000174003
-:1008E00081B201000000184081B2010000001940EF
-:1008F00081B2010000001A4081B2010000001B40DB
-:1009000081B2010000001C4081B2010000001D40C6
-:1009100081B2010000001E4081B2010000001F40B2
-:1009200081B201000000704081B2010000007140FE
-:1009300081B201000000724081B2010000007340EA
-:1009400081B201000000744081B2010000007540D6
-:1009500081B201000000764081B2010000007740C2
-:1009600081B201000000784081B2010000007940AE
-:1009700081B2010000007A4081B2010000007B409A
-:1009800081B2010000007C4081B2010000007D4086
-:1009900081B2010000007E4081B2010000007F4072
-:1009A00081B201000000804081B2010000040040DB
-:1009B000A199010000000050A1D1010000000040F9
-:1009C0001BB001000000004019B001000000004011
-:1009D00017B001000000004015B001000000004009
-:1009E00013B001000000004011B001000000004001
-:1009F0000FB00100000000400DB0010000000040F9
-:100A00000BB001000000004009B0010000000040F0
-:100A100007B001000000004005B0010000000040E8
-:100A200003B001000000004001B001003B0120487C
-:100A3000A15100000000804081B201004701224B1B
-:100A4000747D00000000804081B201006000004B16
-:100A500060990100000000B17EB101004801A8408A
-:100A6000813200004501004081B200000500804055
-:100A700097980100180000AA9688010000008043A2
-:100A800097F00100070000AA96880100000080404E
-:100A900081B201000000005807900100D89F00407B
-:100AA00081B2000000000044A5B30100D80200405C
-:100AB00081320100F8020040813201000000005C38
-:100AC00007900100D89F0040BFB300005A0122CC1C
-:100AD000857F00000000005107900100D89F004072
-:100AE00081B200000000004049B10100AE0300CB1C
-:100AF000A3C90100D0140040A19B01000000002008
-:100B000046B1010000000048F1B10100000000D032
-:100B1000F1B10100000000CAF1B10100000000D5F0
-:100B2000E1B10100070000406199010020000020B0
-:100B300062DD01006301A84081320000000000CCAA
-:100B400085930100F802004081320100D01400407A
-:100B500043990100000000FABAB30100000000FA56
-:100B6000A4B30100000000F8BCB3010000142F4042
-:100B700081B00100000000E7A7B30100000000D829
-:100B8000A9B30100FF0000DD8188010002000040E0
-:100B900080F401007301004080C80100860100DD7F
-:100BA000813200000000004010B1000087010040C9
-:100BB00081B200008801004081B20000890100403C
-:100BC00081B200008A01004081B200008B01004028
-:100BD00081B200008D01004081B200008F01004011
-:100BE00081B200005001004081B20000B601004017
-:100BF00081B200005001004081B20000C4010040F9
-:100C000081B20000C501004081B2000082020040B4
-:100C100081B200008302004081B22800B802004087
-:100C200081B22800D49F004081B22800D59F0040A7
-:100C300081B22800D69F004081B22800D79F004093
-:100C400081B228007201004181C02800550151493C
-:100C5000FD9328005501524AFD932A00550155493C
-:100C6000FD832A005501564AFD832A0050019181D7
-:100C700080302A005501454081B22A0050019182FE
-:100C800080302A005501464081B22A000000004011
-:100C900089B02B0000002F4081B0010000140040FB
-:100CA00049990100B30122DEE16D00000000004C13
-:100CB00049C101000000004181C001009201A2442D
-:100CC000816C00000000004C49D101009A012240D3
-:100CD000E16D00009601A2418150000050010041E9
-:100CE000BFB3000000000042BFB301005001A00FDD
-:100CF000BD6F0000000000DEE1B101000000004413
-:100D000049C10100B50100401999010000004240AD
-:100D100081B20100000043FF85B00100000000DE49
-:100D200019B10100000042FF87B00100000043FF3D
-:100D3000E1B101000000004449C1010000002FFFA3
-:100D4000E1B10100081400A480CC0100AA012640F2
-:100D5000813200000000004185C00100A801A24CC2
-:100D600081500000B40122D281320000AF01224143
-:100D7000A56F00005001A2E081320000000000D207
-:100D8000C1B301000000005C8990010000004042F6
-:100D900080B201000000414380B20100000000F079
-:100DA0008894010055010044E0B10000B101004801
-:100DB00049C10000AF01005B89900000A89F00A01E
-:100DC0009EB000000000004083B00100001400400D
-:100DD000499901000000234081B00100BE0122DEDC
-:100DE000E16D00000000004C49C10100000000411D
-:100DF00081C00100B901A244816C00005001004390
-:100E0000BFB30000000000F818B10100000040F876
-:100E100080B20100000041F080B2010000000040FB
-:100E2000F1B1010000000040F1B1010055010040A6
-:100E3000E1B10000C601004091B000000000004197
-:100E400091B00100D0142E4049B1010005000040CE
-:100E5000A39B0100080000DD81F40100CB010040EC
-:100E600080C801000000004010B10000D101004026
-:100E700081B00000530100DEA1B30000E301004097
-:100E800081B20000E501004081B00000EB010040AC
-:100E900081B20000520100DFE1B10000000000D08B
-:100EA000BAB30100000000DEA1B10100020000D2CF
-:100EB000A5E70100000000D2C1B30100000000005E
-:100EC000F0B10100DB012244C1530000DA0184418A
-:100ED00081400000DE01004081320100000000D0AE
-:100EE00045B10100D5010041A1C10000DA02004076
-:100EF00081320100F802004081320100550100DD1D
-:100F0000A1B100000000004081B00100400000409D
-:100F1000A59B0100DA02004081320100400000D3AD
-:100F2000A7CB0100F80200E0A5B3000003000040D9
-:100F3000A39B0100530100DEA1B3000000000044A8
-:100F4000BFB30100000000DE819001005001A2BA91
-:100F500080040000600000DE61990100E801A8B192
-:100F60008030000052010040E0B10000000000D0DD
-:100F7000BAB301006B020040819801006002004D8D
-:100F80008330010000000044E1B301000000004490
-:100F9000E3B3010000000044E5B301000000004499
-:100FA000E9B3010000000044EBB30100000000447D
-:100FB000F5B3010000000044F7B301000000004455
-:100FC000F9B30100F90122408F6F00007802004060
-:100FD00081980100600200C7833001008002004058
-:100FE000819801006002004283300100000000E8A7
-:100FF000F1B10100000000E9F1B10100000000EAD8
-:10100000F1B10100000000EBF1B10100000000852A
-:10101000F0B10100000000ECF1B10100000000EDB2
-:10102000F1B10100000000B2F0B10100000000A920
-:10103000F0B10100000000ACF0B10100000000AB15
-:10104000F0B10100000000B8F0B10100000000B9EB
-:10105000F0B10100000000BAF0B10100000000BBD7
-:10106000F0B101000C02B8408130000000000040E7
-:10107000819001000E02B940813200000000004161
-:10108000819001001002BA4081320000000000424D
-:10109000819001001202BB40813200000000004339
-:1010A000819001001402BC40813200000000004425
-:1010B000819001001602BD40813200000000004511
-:1010C000819001001802BE408132000000000046FD
-:1010D000819001001A02BF408132000000000047E9
-:1010E000819001001C02C8408132000000000048CD
-:1010F000819001001E02C9408132000000000049B9
-:10110000819001002002CA40813200000000004AA4
-:10111000819001002202CB40813200000000004B90
-:10112000819001002402CC40813200000000004C7C
-:10113000819001002602CD40813200000000004D68
-:10114000819001002802CE40813200000000004E54
-:10115000819001002A02CF40813200000000004F40
-:10116000819001002C02F04081320000000000500C
-:10117000819001002E02F1408132000000000051F8
-:10118000819001003002F2408132000000000052E4
-:10119000819001003202F3408132000000000053D0
-:1011A000819001003402F4408132000000000054BC
-:1011B000819001003602F5408132000000000055A8
-:1011C000819001003802F640813200000000005694
-:1011D000819001003A02F740813200000000005780
-:1011E000819001003C02F84081320000000000586C
-:1011F000819001003E02F940813200000000005958
-:10120000819001004002FA40813200000000005A43
-:10121000819001004202FB40813200000000005B2F
-:10122000819001004402FC40813200000000005C1B
-:10123000819001004602FD40813200000000005D07
-:10124000819001004802FE40813200000000005EF3
-:10125000819001004A02FF40813200000000005FDF
-:101260008190010000000040F0B10100400000400A
-:10127000A59B0100D802004081320100F802004025
-:1012800081320100D0142E06A5B30100400000D326
-:10129000A7CB0100000000F0F1B10100000000F157
-:1012A000F1B10100000000F2F1B10100000000F412
-:1012B000F1B10100000000F5F1B10100000000FAF9
-:1012C000F1B10100000000FBF1B10100000000FCE1
-:1012D000F1B10100000000EBF1B10100000000EEEF
-:1012E000F1B10100000000EFF1B10100000000F3D6
-:1012F000F1B10100000000F6F1B10100000000FDB5
-:10130000F1B10100DB0100C7E1B100000000804045
-:1013100081B20100660200488032000000005140A6
-:101320001AB1010000004D4081B2010000004540AB
-:1013300081B201006302A241835000005F02494074
-:1013400081B20000000052401CB1010000004E407C
-:1013500081B201000000464081B201006802A24152
-:10136000835000005F024A4081B20000000000A0EC
-:101370009EB0010000000080D8B30100000000A171
-:10138000D0B30100000000A2D2B30100000000A40D
-:10139000D4B30100000000D0D6B30100000000D19A
-:1013A000DCB30100000000D2DEB3010000000088C1
-:1013B000DAB30100000000D48EB30100000000D3B6
-:1013C000E6B30100000000ACECB30100000000999E
-:1013D000FAB30100000000D5E0B30100000000D521
-:1013E000E2B30100000000D5E4B30100000000D525
-:1013F000E8B30100000000D5EAB30100000000D509
-:10140000F4B30100000000D5F6B30100000000D5E0
-:10141000F8B30100000000C7A9B101000000004FAF
-:1014200040B101008402004091B000000000004182
-:1014300091B0010007000040A39B0100080000DDFF
-:1014400081F401008802004080C8010000000040D3
-:1014500010B100008D02004081B2000098020040EF
-:1014600081B2000098020046A3B300009B02004036
-:1014700081B20000A102004081B200008F0223501F
-:10148000A56F000000000050A5B30100E802004273
-:10149000A5630100F802004081320100D0142D4004
-:1014A00049B10100000000D0BAB30100000000DE25
-:1014B000A1B10100000000F800B001009702224431
-:1014C000A553000094020041A1C10000550100DDB8
-:1014D000A1B10000E80200DEA1330100F8020040E3
-:1014E000813201005501004081B20000000000453A
-:1014F000BFB301005001A2D2777D0000000000D2EE
-:1015000061B10100000000DE63B101009E02A8404D
-:10151000813200005501004081B20000E802005411
-:10152000A5330100F802004081320100D0142D40A3
-:1015300049B10100000000F8D0B30100000000F83C
-:10154000D2B30100000000F8D4B30100000000F89D
-:10155000D6B30100000000F808B10100AC02004061
-:10156000819801006002004683300100550100406F
-:1015700081B20000000000A09EB00100000000E861
-:1015800043B10100000000E945B10100000000EA9C
-:1015900049B10100000000EBA1B101000000004FC3
-:1015A00040B101000400004081B20000040000408E
-:1015B00081B200000400004081B20000040000403D
-:1015C00081B200000400004081B20000040000402D
-:1015D00081B20000D0142E4049B101000500004046
-:1015E000A39B010000000040C1B30100080000DD22
-:1015F00081F40100BD02004010C90000C3020005D3
-:1016000081B000005001004081B20000CB02000513
-:1016100081B000005001004081B20000D0020044BF
-:10162000A5B30000D2020044A5B3000002000040B0
-:10163000A4E70100000000E081B10100FFFF00C14C
-:10164000F0890100C802224181500000C40200411B
-:10165000C1C30000DA02004081320100F8020040FC
-:10166000813201005501004081B2000002000040BB
-:10167000A4E70100000000E091B10100FFFF00C9F4
-:10168000F0890100C802224181500000CC020041D3
-:10169000C1C30000FFFF00DE85890100C80200C24F
-:1016A000E0B10000FFFF00DE95890100C80200CA1A
-:1016B000E0B100000400004081B2000004000040DE
-:1016C00081B200000400004081B20000040000402C
-:1016D00081B20000000000E7A7B30100000000D8BD
-:1016E000A9B301000000004049B10100AE0300CBE6
-:1016F000A3C901000000002046B10100000000D293
-:10170000F1B10100000000D3F1B10100000000D4EC
-:10171000F1B10100000000D0E1B10100000000D1F2
-:1017200061B101002000002062DD0100E202A8405A
-:1017300081320000000080CC85930100040000404D
-:1017400081B200000400004081B2000004000040AB
-:1017500081B20000000000E7A7B30100000000D83C
-:10176000A9B301000000004049B10100AE0300CB65
-:10177000A3C901000000002046B10100000000D212
-:10178000F1B10100000000D0F1B10100000000D370
-:10179000F1B10100E10200D4E1B100000400004019
-:1017A00081B200000400004081B20000040000404B
-:1017B00081B200000400004081B20000040000403B
-:1017C00081B200000400004081B20000040000402B
-:1017D00081B200000000A2CC85FF00000000005094
-:1017E00081B00100FA02A24181500000F902A2F288
-:1017F00080300000000080CC8583010004000040A0
-:1018000081B200000400004081B2000004000040EA
-:1018100081B20000B5030040A199010000002F41F2
-:1018200099B301000A032244816C0000120322488C
-:10183000816C00000C03224C816C000016032250C6
-:10184000816C000017032254816C00001903225898
-:10185000816C00001E03225C816C0000500100407E
-:1018600081B20000000000BC09B00100DD9F00CA89
-:1018700001B000000000004003B001000000004182
-:10188000F38301001003A242056C00000000004138
-:1018900005B00100DD9F22CA07140000DD9F00454E
-:1018A000F3930000DD9F2043956F0000DD9F80CA09
-:1018B00005300000DD9F220180300000DD9F00CB5D
-:1018C000DB910000570100BCABB30000000000BC7E
-:1018D000B1B30100DD9F00CACFB30000FF0000CA12
-:1018E00081880100DD9FA240747D000060002040DF
-:1018F000609901001B03A8B1823000001A03004068
-:1019000081B20000DD9F00CA79B3000004000040EE
-:1019100081B200000000004E81B0010000000043D1
-:10192000CB8301000000454081B201002203A241A7
-:10193000815000000000454081B201000000454098
-:1019400081B201002D039182823000000000008AE4
-:1019500080B00100AE9F004080CE01002B03A64066
-:10196000813200002D03564081B20000B5030040D3
-:10197000A19901000000005307900100B503004049
-:10198000A19901000000005207900100D89F00417A
-:101990008BB300000000004E81B001000000004247
-:1019A000CD8301000000464081B201003203A24114
-:1019B000815000000000464081B201000000464016
-:1019C00081B201003D039181823000000000008956
-:1019D00080B00100AE9F004080CE01003B03A640D6
-:1019E000813200003D03554081B20000B503004044
-:1019F000A19901000000005207900100B5030040CA
-:101A0000A19901000000005307900100D89F0041F8
-:101A10008BB30000B0030040A1990100C4142F4013
-:101A200099B301005701004049B100000400004093
-:101A300081B200000400004081B2000004000040B8
-:101A400081B200000400004081B2000004000040A8
-:101A500081B200003094004043990100009000F8EA
-:101A600080980100100000F288E40100200000408E
-:101A7000209901000000005F239101004D031F9198
-:101A80008032000030000040209901000000005F1B
-:101A90002391010050031F9180320000400000405C
-:101AA000209901000000005F2391010053031F9162
-:101AB000803200000000005F2391010055031F9158
-:101AC000803200000008804020990100040000409E
-:101AD00081B200000000004784B001000000A2486D
-:101AE000848400000000005F61B101000000005C20
-:101AF0008F9001000000004762B101005A03A84026
-:101B000081320000000800478EC801005803005CC5
-:101B10008F800000E00000406199010058152D40C1
-:101B20008DB00100D0142DF088B00100000000FA43
-:101B30008AB001000000004581B0010007000045A7
-:101B400082880100000000438BF001000000004883
-:101B500083E0010000000046829401002000004163
-:101B600060990100000000418DC001007403225FF4
-:101B70008D6C00006503A2418150000063030040AA
-:101B800081B2000008000040859801000000004478
-:101B900082B001000000004186B00100001C00433B
-:101BA00086D801000000A641855001007003004165
-:101BB00083E000006E030040813201000000004815
-:101BC00085E00100D0142F468494010020000042DB
-:101BD00060990100C0000040619901000000804050
-:101BE00081B201000400004081B200000400004006
-:101BF00081B200000400004081B2000004000040F7
-:101C000081B200000400004081B2000004000040E6
-:101C100081B20000070000458088010000000043F9
-:101C20008BF0010000040040839801008503A0416F
-:101C3000815000008303004182E8000000008041E1
-:101C40008EC001000400004081B20000040000408A
-:101C500081B200000000004049B1010000020040D4
-:101C600083980100003900404599010000000040C0
-:101C7000F1B101008B03A24183500000000000403D
-:101C800085B001000B00004482F401001A1500A683
-:101C900086B0010070150040459901000008004021
-:101CA000F199010000000042F0B10100003900404C
-:101CB000E1990100040000406199010070150043A2
-:101CC000629901009503A840813200009703225ACF
-:101CD000737D00007A000040619901009803A8B16B
-:101CE0007E3100000008004284C801009003A24138
-:101CF000835000000000804081B2010004000040D9
-:101D000081B200000400004081B2000004000040E5
-:101D100081B2000058152D408DB00100D0142DF077
-:101D200088B00100000000408FB00100010000A653
-:101D300090B0010000F800489098010000000045B4
-:101D400093B00100000000FA8AB001008003004057
-:101D500081320100020000A680B00100AC032240E5
-:101D6000826C0000B0030040813201005803004043
-:101D700081320100000000418DC00100B503225FE7
-:101D80008D6C0000A703A24193500000A503004002
-:101D900081B20000FF070047848801000000A640D0
-:101DA00081B20000ED9F0047803001000002004733
-:101DB0008EC80100B003004081B200000000004462
-:101DC00050B30100BB032018896C0000040000A67A
-:101DD00084B00100200000A686B001000010004081
-:101DE000559B0100BE03004081B20000040000A624
-:101DF00084B00100200000A686B001000010004061
-:101E0000559B01000000004250D30100000000A8D3
-:101E10004FB30100000000434ED301006E030040A9
-:101E2000813201008203004280300100B003004093
-:101E300081320100C70322A78F6C00005A030040C3
-:101E400081320100C403004081B2000000008040E4
-:101E500081B20100C8142EBB85B00100000000EE65
-:101E600082B0010000000041E0B10100000000A2CA
-:101E7000A0B3010000000044A5B30100E19F00CA27
-:101E8000A7330100E09F004081B200000400004041
-:101E900081B20000D6032242756F0000D8032241B0
-:101EA000756F0000DA031ECA81320000DC031FCA0E
-:101EB00081320000000000CAC9B10100DD9F00426C
-:101EC00075B30000000000CACDB10100DD9F0041E4
-:101ED00075B30000000000CACFB10100DD9F0040D3
-:101EE00075B30000008100A6C6B10100DD9F00406F
-:101EF00081B20000008000A6C6B10100DD9F004055
-:101F000075B300000400004081B2000004000040EE
-:101F100081B200004501004D933001004501004EA3
-:101F2000933001004501004C93300100EC9F0040CC
-:101F300081320100DD9F004081B2000004000040BA
-:101F400081B200000400004081B2000004000040A3
-:101F500081B200005495004045990100DD9F00CA00
-:101F6000E5B100000400004081B200000400004020
-:101F700081B200000400004081B200000400004073
-:101F800081B200000400004081B200000400004063
-:101F900081B20000CC142E4087B00100000000A2E6
-:101FA000A0B3010015040043B2330100000068DA59
-:101FB00089B001007C0000408B98010000000050B7
-:101FC00089F001000000004189D0010003000044B5
-:101FD000888C01000000004487C00100000000411F
-:101FE000A5B3010015040043B2330100000000DA7C
-:101FF000F1B101000000004487C001000000004171
-:10200000A5C301000B042244895000000B042244A4
-:102010008B500000FA03A250A56F000000000042A0
-:10202000A5E30100000000CAA7B30100E19F00BBC7
-:1020300085300100CC142ED295C30100AE0300CB35
-:10204000A3C901000000002042B1010000000050BF
-:1020500081B001000804A241815000000704A2F2EF
-:1020600080300000FA030040A5B3000000000042E9
-:10207000A5E30100000000CAA7B30100E19F00BB77
-:1020800085300100E09F004081B200000400004064
-:1020900081B20000000000D92BB101000010004007
-:1020A00083980100DB00004081320100FFFF0094B3
-:1020B000B48B01000000804081B20100000000D913
-:1020C0002BB101000010004083980100DD000040AA
-:1020D0008132010000008094B4B30100040000408C
-:1020E00081B200000400004081B200000400004002
-:1020F00081B200000400004081B2000004000040F2
-:1021000081B200000400004081B2000004000040E1
-:1021100081B20000000000D92BB10100000000DAFC
-:1021200027B1010006C000402D990100DE000040EB
-:1021300081320100001000408398010002C4004178
-:102140002C990100DE000040813201000040004077
-:1021500083980100058200412C990100DE000040B7
-:10216000813201002D048094803200000C01004077
-:10217000813201002804004081B200000480004048
-:102180002D990100DE0000408132010000008040F6
-:1021900081B201003104001210C9000000488040E3
-:1021A0000B980100C04980400B980100804B804093
-:1021B0000B980100404D80400B980100004F80407B
-:1021C0000B980100C05080400B9801008052804065
-:1021D0000B980100405480400B980100005680404D
-:1021E0000B980100C05780400B9801008059804037
-:1021F0000B980100405B80400B980100005D80401F
-:102200000B980100C05E80400B9801008060804008
-:102210000B980100406280400B98010000648040F0
-:102220000B980100C06580400B98010080678040DA
-:102230000B980100406980400B980100006B8040C2
-:102240000B980100C06C80400B980100806E8040AC
-:102250000B980100407080400B9801000072804094
-:102260000B980100C07380400B980100807580407E
-:102270000B980100407780400B9801000079804066
-:102280000B980100C07A80400B980100807C804050
-:102290000B980100407E80400B9801000400004034
-:1022A00081B200000400004081B200000400004040
-:1022B00081B200000400004081B200000400004030
-:1022C00081B200000400004081B200000400004020
-:1022D00081B200005904001210C900000080804043
-:1022E0000B980100008280400B9801000084804020
-:1022F0000B980100008680400B9801000088804008
-:102300000B980100008A80400B980100008C8040EF
-:102310000B980100008E80400B98010000908040D7
-:102320000B980100009280400B98010000948040BF
-:102330000B980100009680400B98010000988040A7
-:102340000B980100009A80400B980100009C80408F
-:102350000B980100009E80400B98010000A0804077
-:102360000B98010000A280400B98010000A480405F
-:102370000B98010000A680400B98010000A8804047
-:102380000B98010000AA80400B98010000AC80402F
-:102390000B98010000AE80400B98010000B0804017
-:1023A0000B98010000B280400B98010000B48040FF
-:1023B0000B98010000B680400B98010000B88040E7
-:1023C0000B98010000BA80400B98010000BC8040CF
-:1023D0000B98010000BE80400B98010004000040F3
-:1023E00081B200000400004081B2000004000040FF
-:1023F00081B200000400004081B2000004000040EF
-:1024000081B200000400004081B2000004000040DE
-:1024100081B200000000004087B1010000000040D0
-:1024200097B001000000004B80B10100010000A640
-:1024300082B1010082048541974000000000004005
-:1024400097B101000000004097B001000000004B70
-:1024500090B10100010000A692B1010087048541FE
-:10246000974000000000804081B20100040000405D
-:1024700081B200000400004081B20000040000406E
-:1024800081B200000400004081B20000040000405E
-:1024900081B2000090046040813200000000001210
-:1024A00080B10100FFFFF04B82890100930460407E
-:1024B000813200000000004A80B101000100F0A656
-:1024C00082B101009604604081320000FFFF004BA2
-:1024D000848901000000F0C224B001000000004A1D
-:1024E00090B10100FFFF804B928901000000004A7B
-:1024F00090B10100010080A692B10100FFFF004BE6
-:1025000094890100000080CA94B0010004000040DA
-:1025100081B200001000004E98E4010000000007A6
-:10252000989401000000004399E001000000008041
-:10253000989401000000004999E001000000004C5F
-:1025400088940100A604474081320000AD04222097
-:10255000876F000000001F4081B2010000000040B2
-:1025600081B201000000004081B201000000004083
-:1025700081B20100A604004081B2000000001F806B
-:1025800086B30100B004224F777D0000C0040040F4
-:10259000813201000000004F61B1010000000044E1
-:1025A00062B10100B104A84081320000B804224B9E
-:1025B000897C0000B604224F777D0000C0040040F3
-:1025C000813201000000004562B10100B604A8405C
-:1025D000813200000000802087B301000400004029
-:1025E00081B200000400004081B2000004000040FD
-:1025F00081B200000400004081B2000004000040ED
-:1026000081B200000400004081B2000004000040DC
-:1026100081B200000000005099B001006F0000403E
-:1026200061990100C104A8B152330000C604224BD5
-:10263000537F00006F00004061990100C404A8B1FD
-:102640007E310000C104A241995000000000A24F59
-:1026500077FD00000400004081B20000040000404B
-:1026600081B200000400004081B20000040000407C
-:1026700081B200000400004081B20000040000406C
-:1026800081B200000400004081B20000040000405C
-:1026900081B200001000004E98E401000000000725
-:1026A000989401000000004399E0010000000080C0
-:1026B000989401000000004899E00100D604004C05
-:1026C00088940000D604474081320000DD042220B7
-:1026D000876F000000001F4081B201000000004031
-:1026E00081B201000000004081B201000000004002
-:1026F00081B20100D604004081B2000000001F80BA
-:1027000086B30100E004224F777D0000F004004012
-:10271000813201000000004F61B10100000000445F
-:1027200062B10100E104A84081320000E804224ABD
-:10273000897C0000E604224F777D0000F004004011
-:10274000813201000000004562B10100E604A840AA
-:10275000813200000000802087B3010004000040A7
-:1027600081B200000400004081B20000040000407B
-:1027700081B200000400004081B20000040000406B
-:1027800081B200000400004081B20000040000405B
-:1027900081B200000000005099B001006F000040BD
-:1027A00061990100F104A8B152330000F604224AF5
-:1027B000537F00006F00004061990100F404A8B14C
-:1027C0007E310000F104A241995000000000A24FA8
-:1027D00077FD00000400004081B2000004000040CA
-:1027E00081B200000400004081B2000004000040FB
-:1027F00081B200000400004081B2000004000040EB
-:1028000081B200000400004081B2000004000040DA
-:1028100081B200007B000040619901000005A8B171
-:102820008030000012051D4080320000401800403A
-:1028300049990100040000A686B001001005A240DD
-:1028400086040000DE9F9C4080320000FFFF0040B5
-:1028500088880100300500504731010036000044EF
-:1028600088CC01000C055240813200003005004048
-:10287000473101000000004189B0010030050048E7
-:10288000473101003005000547310100DE9F00405F
-:1028900081B200002800004047991B00DE9F0041E4
-:1028A000E1C11A007818004049991B00190522540B
-:1028B000817C1A001405424081321A00008200B364
-:1028C00067DF1B0000001A4493931B0028000040A0
-:1028D00047991B00300500418930010027050F4052
-:1028E00080320000FF7F00408888010030050050E2
-:1028F000473101003600004488CC01001F05994093
-:10290000803200000000004889D0010021059B4072
-:10291000803200000000004C89D0010023051F44D4
-:1029200080320000300500404731010000000041C6
-:1029300089B00100300500484731010030050058DA
-:1029400047310100DE9F004081B2000010000040CE
-:1029500086F401006F00004386880100DE9F260593
-:10296000473100003005004189300100DE9F004002
-:1029700081B200000400004081B200000400004069
-:1029800081B200000400004081B200000400004059
-:1029900081B200000000A044F041010000000040AE
-:1029A00081B2010000008041E1C10100040000404B
-:1029B00081B200000400004081B200000400004029
-:1029C00081B200000400004081B200000400004019
-:1029D00081B200004C010007913001000000A240CC
-:1029E00097EC00000000800591C001000400004049
-:1029F00081B200000400004081B2000004000040E9
-:102A000081B200000400004081B2000004000040D8
-:102A100081B200004C010040813201004405A24017
-:102A2000976C00003A000040B39B01004505004050
-:102A300081B2000040000040B39B01001004004040
-:102A400081320100000000DAF5B1010010040042FB
-:102A5000B3430100000000DAF5B1010010040042A8
-:102A6000B3430100000000DAF5B101004E00004060
-:102A7000B39B01001004004081320100080000DA1D
-:102A8000F7F5010050000040919801000000004758
-:102A90008FB0010010040048B2330100000000DADA
-:102AA000F7B10100080000DAF7F50100000000426C
-:102AB00091C001005005A2418F500000000000416C
-:102AC00045D1010008000040B39B01001004004004
-:102AD00081320100000000DAFDB101000A0000406F
-:102AE000B39B01001004004081320100000000DAB5
-:102AF000FDB101001A000040B39B0100100400402A
-:102B000081320100000000DAFDB101001800004030
-:102B1000B39B01001004004081320100000000DA84
-:102B2000FDB1010038050040813201001E0000485F
-:102B3000B2CB01001004004081320100000000DA35
-:102B400091C0010000000048B2CB01001004004019
-:102B50008132010000006EDA8FB0010002000048EF
-:102B6000B2CB01001004004081320100000000DA05
-:102B7000FDB1010004000048B2CB01001004004088
-:102B800081320100000080DAFDB101000400004044
-:102B900081B200007A052245FD7F0000401600400A
-:102BA00045990100DB9F00404931010008000048C1
-:102BB000B2CB010015040040813201007805A2402B
-:102BC0008F6C00007D052220B56F00007A05004063
-:102BD00081B20000DA9F004081321F007D05224053
-:102BE000976C1E007A05424081321E000000004FA3
-:102BF00067931F00DF9F005867931E005416004024
-:102C000047991F00000000FEF4B11F0000000040C3
-:102C100081B21F00000000FEF4B10100000000407E
-:102C200081B20100000000FEF4B10100000000408C
-:102C300081B20100000000FEF4B10100000000407C
-:102C400081B20100000000FEF4B10100000000406C
-:102C500081B20100000000FEF4B10100000000405C
-:102C600081B20100000000FEF4B101004600004006
-:102C7000B39B01001004004081320100080000DA1B
-:102C8000F7F501004800004095980100000000445D
-:102C900097B001001004004AB2330100000000DACE
-:102CA000F7B10100080000DAF7F50100000000426A
-:102CB00095C001009005A241975000002A000040F5
-:102CC000A59B010040160040A19B0100000000CA26
-:102CD000A7B30100E19F00BB85300100E09F0040E9
-:102CE00081B200000400004081B2000004000040F6
-:102CF00081B200000400004081B2000004000040E6
-:102D000081B200000400004081B2000004000040D5
-:102D100081B20000B8052245FD7F0000E0150040AB
-:102D2000479901001A0000A280DC01000000005059
-:102D3000F1B10100F0150040F1990100000000CA56
-:102D4000F1B101000700004061990100200000403E
-:102D500062DD0100A705A8BBE131000000000050C2
-:102D600083B00100AA05A24183500000A905A2F288
-:102D7000823000004C01004081320100B005A240C9
-:102D8000976C00003A000040B39B0100B105004081
-:102D900081B2000040000040B39B0100F0150040EC
-:102DA000439901001004004081320100B805A2FAE5
-:102DB000B46F000010040042B3430100B805A2FA4A
-:102DC000B46F000010040042B3430100BB0522FAB7
-:102DD000B46F0000B8054240813220000000004E70
-:102DE00067932100DF9F0058679320004016004042
-:102DF00045992100DB9F004049312100F615004034
-:102E0000439921005C1600404599210000006EFAAC
-:102E10008EB021000000004081B20100000000FEE1
-:102E2000F4B101000000004081B20100000000FE8A
-:102E3000F4B101000000004081B20100000000F088
-:102E4000B4B30100C905A2408F6C0000FC1520201E
-:102E5000E1B10100CE05004081B22400DA9F0040BC
-:102E600081322500CE052240976C2400CB054240DC
-:102E7000813224000000004F67932500DF9F005837
-:102E80006793240038050040813225001E00004869
-:102E9000B2CB25001004004081320100D30522503E
-:102EA000B56F00000000005091C001000000004814
-:102EB000B2CB0100F615004043990100200400F256
-:102EC000B433010002000048B2CB0100F815004005
-:102ED00043990100200400F2B433010004000048CB
-:102EE000B2CB0100FA15004043990100200400F222
-:102EF000B433010008000048B2CB0100FC150040CB
-:102F000043990100000000F094B00100FFFF004A67
-:102F1000B48B010020040040813201000A00004807
-:102F2000B2CB01001000004AB4F7010020040040B9
-:102F30008132010038050040813201001E00004846
-:102F4000B2CB01001004004081320100E90522509B
-:102F5000B56F0000EA050050B5B300000000004066
-:102F6000B5B301002004004081320100E09F004021
-:102F700081B200000400004081B200000400004063
-:102F800081B200000400004081B200000400004053
-:102F900081B2000000160040479901003031004026
-:102FA000F599010032330040F599010034350040B5
-:102FB000F599010036370040F59901003839004095
-:102FC000F599010041420040F59901004344004059
-:102FD000F599010045460040F59901004748004039
-:102FE000F5990100494A0040F59901002C00004084
-:102FF0008398010000000040F7B10100FC05A241E8
-:103000008350000080162E0683B00100360000FBBE
-:10301000F6A90100FF05A2418350000022000040F4
-:1030200083980100000000FBF6B101000206A241F6
-:10303000835000006200004095980100DC9F004032
-:103040008132010000162D0683B001008016004079
-:10305000459901005C0000FBF6A901000806A241A9
-:103060008350000000000070F9B101000000007101
-:10307000F9B1010000000072F9B101000000007315
-:10308000F9B1010000000074F9B1010054000040E2
-:1030900095980100DC9F0040813201000000007023
-:1030A00095B0010014062270B56F00000000804149
-:1030B00097B001000000804097B00100040000407C
-:1030C00081B200000400004081B200000400004012
-:1030D00081B20000456700A6E0B201000123007044
-:1030E000E19A0100CDEF00A6E2B2010089AB0071C8
-:1030F000E39A0100BA9800A6E4B20100FEDC007277
-:10310000E59A0100321000A6E6B201007654007381
-:10311000E79A0100D2C300A6E8B20100F0E1007412
-:10312000E99A01008016004A44C901000000000726
-:1031300081B001000000004A80D001000000004082
-:10314000F7B101002506A241815000008016004A17
-:1031500044C90100FC162A47E7B501000300004AF4
-:10316000E8E50100000000408DB001005003004080
-:10317000A399010080163D468DE00100000000503B
-:1031800089B00100000000FC40B0010000000041D7
-:10319000A3C101002E06A24189500000000000706A
-:1031A000EBB2010000000071EDB2010000000072FE
-:1031B000EFB2010000000073F1B2010000000074E2
-:1031C000F3B201000000004083B001000F00004195
-:1031D0008088010050030040A2C901004B06A050A6
-:1031E000836C00000D00004098C801000000004FF3
-:1031F000998401005003004CA2C901000000002086
-:1032000086B001000800004098C801000000004F8F
-:10321000998401005003004CA2C901000000002065
-:1032200086A401000200004098C801000000004F81
-:10323000998401005003004CA2C901000000002045
-:1032400086A4010050030040A2C901000000004311
-:1032500040A401000100002088E401000000005F9C
-:1032600041F0010000000044409401000500007599
-:1032700089E401001B00007585F401000000004492
-:10328000849401005506A353836C0000000000766F
-:1032900089B00100000000778984010000000076F9
-:1032A0008BB00100000000208BA40100000000781A
-:1032B0008B840100640600458894000027000041CB
-:1032C00080CE01005A06AA4081320000000000763C
-:1032D00089B001000000007789A40100640600782D
-:1032E00089A400003B00004180CE01005706AA409F
-:1032F000813200000000007689B0010000000077F4
-:1033000089840100000000768BB001000000007885
-:103310008B840100000000458894010000000077C4
-:103320008BB00100000000788B840100640600452A
-:10333000889400000000004484C00100000000796F
-:1033400085C001000000002084C001006B06A3536B
-:10335000836C0000825A00A684C001009979004263
-:1033600084C801007806004081B2000027000041B7
-:1033700080CE01007006AA4081320000D96E00A6FE
-:1033800084C00100A1EB004284C80100780600401F
-:1033900081B200003B00004180CE01007506AA40CA
-:1033A000813200001B8F00A684C00100DCBC0042FB
-:1033B00084C801007806004081B2000062CA00A6FD
-:1033C00084C00100D6C1004284C8010078060040D4
-:1033D00081B2000000000078F3B201000000007725
-:1033E000F1B201001E00007689E4010002000076BF
-:1033F000EFF6010000000044EE96010000000075A9
-:10340000EDB2010000000042EAB2010000000041FC
-:1034100083C001004F00004180CE010037062A40E2
-:103420008132000000000075E1C20100000000765A
-:10343000E3C2010000000077E5C20100000000784F
-:10344000E7C2010000000079E9C201002B068141BA
-:103450008D4000000000804081B201000400004067
-:1034600081B200000400004081B20000040000406E
-:1034700081B200000400004081B20000040000405E
-:1034800081B200000400004081B20000040000404E
-:1034900081B2000000000050FD9301004016004082
-:1034A00045990100DB9F00404931010008000048B8
-:1034B000B2CB01001504004081320100B906224060
-:1034C0008F6C0000DA9F004081320100B906A240F3
-:1034D000976C00005E160040439901007C1620F6B0
-:1034E000E0B101000000004031B301009D06224F11
-:1034F0008F7C000000000051FD9301009F062240D8
-:103500008F7C0000A3060054FD930000A106224218
-:103510008F7C000000000052FD930100A3062241B1
-:103520008F7C000000000053FD930100B70622517C
-:10353000FD7F000038050040813201000C0000488A
-:10354000B2CB01001004004081320100B206A2405B
-:10355000B56F00001E000048B2CB01001004004807
-:1035600096300100000000DA97C001000400004B13
-:10357000B2CB010010040040813201000E0000486F
-:10358000B2CB010020040040813201000C00004851
-:10359000B2CB010000000030B5B3010020040040B0
-:1035A000813201000E000048B2CB0100100400403F
-:1035B00081320100B6062240B56F0000BA06005401
-:1035C000FD93000000000051FD8301001C0000FE7F
-:1035D0007FD90100BA06A6408132000000000055E4
-:1035E000FD9301000000804081B201000400004012
-:1035F00081B200000400004081B2000004000040DD
-:1036000081B200000400004081B2000004000040CC
-:1036100081B20000E79F004081320100C406225CB5
-:103620001F7C0000E39F00881CB00000E99F005C45
-:103630001F00010000002E0548B1010000000040FD
-:10364000E1B1010004002D0348B10100000000F0C9
-:103650003CB001002800001402C801000000000175
-:1036600034B0010000002D0532B001002200000539
-:103670000AC801001000000348C90100000000F85A
-:1036800018B00100000000F804B00100000000F8CC
-:103690000EB001000C0000A40CC80100EA9F00401D
-:1036A000813201000000004023B001000A0722011E
-:1036B0008032000000003C4423E0010000002EA402
-:1036C00080B001000000001048C10100D906A30726
-:1036D000026C0000DA0668011AB0000000006807FA
-:1036E0001AB001000000000D02D00100000000052A
-:1036F000F0B101000000000CF0B101000000000278
-:10370000E0B101000000000D0AC00100EC062240FB
-:10371000036C0000E6062242236C0000000000411A
-:1037200023C001000000004761B10100200000A497
-:1037300062DD01002307284081320000E3060040DB
-:1037400081B200000000001080C0010000000047AE
-:1037500061B101000000004062B10100E806A8402C
-:1037600023300000E39F00881CB0000023070040C6
-:1037700081B200000000001080C00100000000477E
-:1037800061B101000000004062B10100EE06A840F6
-:1037900023300000E39F00881CB0000022000019C5
-:1037A00048C9010000002D1448C101000F0000F2BB
-:1037B0003A880100000000423BE001000E000014C6
-:1037C00002C801000000001D02C00100FA06231A11
-:1037D000025000000000004603C001002307000162
-:1037E00034C000000C002D1D48C10100F00000F2A3
-:1037F000308801000000004231F001000000001498
-:1038000002B001000000001D02C00100000000180D
-:1038100002C001000207221A025000002307000123
-:1038200034C000002200001948C9010002002D1414
-:1038300048C10100000000F614B001000000001DA6
-:1038400014D001000000001814D001000000001E78
-:1038500024B001001200001710C801002307001A4D
-:1038600010C0000000003C4423E00100000000A460
-:1038700086B0010000002E1048C101000F07A312FE
-:103880000E6C0000100760071AB000000000601204
-:103890001AB001000000680D16940100FFFF000B34
-:1038A00016D8010000000008F0B101000000000C73
-:1038B000F0B1010000000002E0B1010000000010C2
-:1038C00086C001000000004661B1010020000043F5
-:1038D00062DD01001707A85C1F1000004007220DE1
-:1038E000145000004007220D245000000000000D7D
-:1038F00010C001001E072242236C00002307004174
-:1039000023C000000000004661B10100400000102B
-:1039100062DD01001F07A85C1F000000E39F008814
-:103920001CB000000000004023B001003F07A20DC2
-:103930000E5000002E0722461F7C000000000046AB
-:103940001F8001003080001042C901002C0722F2C4
-:10395000640600000000004761B101004000001053
-:1039600062DD01002907A84081320000E39F008842
-:103970001CB0000020800003469901000000005F99
-:10398000E191010000002D0648B10100000000F89F
-:1039900018B00100000000F804B0010033071FF068
-:1039A0000E300000D306004C0DC0000000002E5F5A
-:1039B0000F800100D3062307146C000030000010B4
-:1039C00048C9010024000040F199010000000003F3
-:1039D000F0B1010000000000F0B10100000000168D
-:1039E000F0B101002400000000C801000000004701
-:1039F00061B10100200000A462DD01003C07A8467F
-:103A00001F100000D30600030CB00000D306000D09
-:103A100018C000005F07A2441F7C000000000019CE
-:103A20000AB001002200000548C901000A002D1457
-:103A300048C1010002002040E5B10100040020401F
-:103A4000E5B101000D002D1D48C10100090000F382
-:103A5000388801000D002050E7B1010004002D401E
-:103A60003FB00100000000F432B00100040020402B
-:103A7000E1B101002200000548C9010000002D1439
-:103A800048C101000200001D94F401000000004044
-:103A900091B001005207A0FC9040000000000041DE
-:103AA00091C001005007A24195500000000000A401
-:103AB00096B0010004002E0548B101000000004846
-:103AC000F0B101000000004B48B1010000000018F7
-:103AD00048C101000200001894F4010000002D18F4
-:103AE00090B001005C07A0FC904000000000004185
-:103AF00091C001005A07A241955000000000004803
-:103B0000E0B1010010002040E5B1010004002D05E6
-:103B100048B10100000000F880B02D00000000F066
-:103B200016B02D002200000548C92D000000001429
-:103B300048C12D00640743303D072C000000009E63
-:103B400085B02D0000001B413DC32D000400204224
-:103B5000ECB12D000000001E82B0010002002E1DFD
-:103B600082C001000000661882C00100000000420F
-:103B700080C001006E07A0418044000000000041A9
-:103B800081C001001000004092F401000A002E30B4
-:103B900081840100720790409240000000000041C3
-:103BA00093C001000000662093A401000000001DE6
-:103BB00048C1010004002019E8B101000000001E06
-:103BC00016C001007807A01916440000000000414B
-:103BD00017C001000D002F1E32C001007D07A2405A
-:103BE000156C00007C07A01C16400000000000417E
-:103BF00017C00100000063F33894010010000005B5
-:103C000048C9010004002E1E98B001000000601A8F
-:103C100098C001000C002040E1B101008B07224652
-:103C20001F7C0000000000461F8001003080001053
-:103C300042C90100890722F2640600000000004723
-:103C400061B101004000001062DD01008607A8405C
-:103C500081320000E39F00881CB000002080000338
-:103C6000469901000000005FE191010030800010E2
-:103C700044C901001200001AF0C901000000001739
-:103C8000F0B1010010000005E0C901003000001093
-:103C900080C801000000004461B101002000004024
-:103CA00062DD01009107A840813200009B07225C81
-:103CB0001F7C000000003C4423E0010000002D10A8
-:103CC00048C101009B0722F2640600000000004684
-:103CD00061B101004000001062DD01009807A840BA
-:103CE00081320000E39F00881CB00000EB9F005C65
-:103CF0001F00010020002F0548B101000000000B4B
-:103D0000E4B101000000005017F00100A10790F29B
-:103D1000164000000000004117C0010000006620AE
-:103D200017A40100100000142AC801000000001DA3
-:103D30002AC00100000000502BE00100000000F24A
-:103D40002A9401003080001042C90100AC0722F221
-:103D5000640600000000004461B101004000001052
-:103D600062DD0100A907A84081320000E39F0088BE
-:103D70001CB000000080001710DC0100C9072240C1
-:103D8000156C0000B407A2441F7C00000000004432
-:103D90001F900100B307229F136C000002000088EF
-:103DA0001CCC0100E49F004081B2000000000041F3
-:103DB0003FC30100E69F004081320100B707A241E6
-:103DC000877C00000000001E3EC00100C9072240A1
-:103DD000156C0000BA07201E146C00000000000AD9
-:103DE0003CB00100E59F001E24300100BF072208FF
-:103DF0002E3000000000005211C001000000001A27
-:103E000010C001002307004017B00000E49F0088A5
-:103E10001CB00000E59F004081320100BC07A208F1
-:103E20002E300000808000A604B001000600004093
-:103E300087980100008000034499010004002204D7
-:103E4000E0310000E89F001F8C30010000000040BE
-:103E50000FB00100E29F005C1F9000000080000393
-:103E60004499010004002204E0310000E69F004074
-:103E700081320100CE07A241877C0000CF07001EDF
-:103E80003EC000000000001F8CB001000000004098
-:103E900005B00100E89F00400F300100E29F005C88
-:103EA0001F9000000400004081B2000004000040A8
-:103EB00081B200000400004081B200000400004014
-:103EC00081B200000400004081B200000400004004
-:103ED00081B200000400004081B2000004000040F4
-:103EE00081B200000400004081B2000004000040E4
-:103EF00081B200000400004081B2000004000040D4
-:103F000081B200000400004081B2000004000040C3
-:103F100081B200000400004081B2000004000040B3
-:103F200081B200000400004081B2000004000040A3
-:103F300081B200000400004081B200000400004093
-:103F400081B200000400004081B200000400004083
-:103F500081B200000400004081B200000400004073
-:103F600081B200000400004081B200000400004063
-:103F700081B200000400004081B200000400004053
-:103F800081B200000400004081B200000400004043
-:103F900081B200000400004081B200000400004033
-:103FA00081B200000400004081B200000400004023
-:103FB00081B200000400004081B200000400004013
-:103FC00081B200000400004081B20000F70700BC8D
-:103FD00080B200000380004081B2000003800040F6
-:103FE00081B200000380004081B2000003800040E5
-:103FF00081B200000380004081B2000003800040D5
-:1040000081B200000380004081B2000003800040C4
-:1040100081B200003180004081B200003480004055
-:1040200081B200003580004081B2000004000040F1
-:1040300081B200001B808180803200001487A24082
-:10404000916F00000000004C90B301005C952EA21F
-:1040500080B00100FF000080F489010090952AC81B
-:10406000E5B10100000000A1F0B101000000004036
-:10407000F0B10100000000A4F0B10100000000D088
-:10408000F0B10100000000D1F0B10100000000D249
-:10409000F0B101000000004CF0B10100000000D4BC
-:1040A000F0B10100000000D3F0B10100000000EE0B
-:1040B000F0B101000000004EF0B10100000000402E
-:1040C00044B1010018801181983000000000514077
-:1040D00081B201001A801182983000000000524025
-:1040E00081B2010014870048FD930000B603004030
-:1040F000A19901002380A242FD7F00002080008062
-:1041000080320000228011818230000022805140E4
-:1041100081B2000022801182823000002280524051
-:1041200081B200002C800048FD93000027800080B1
-:10413000803200002680A253077C0000000051530B
-:10414000079001002A800052079000002980A252A7
-:10415000077C00000000525207900100000000534D
-:104160000790010000000048FD9301000000004698
-:10417000F39301005C952EA252B30100FF00008072
-:10418000F48901000000004CE4B10100000000A926
-:1041900045B101003080004C80B200000000454075
-:1041A00081B201000000554081B20100AF8205409C
-:1041B00049B10000AF82054049B100000000054050
-:1041C00049B101004C010040813201000000004B68
-:1041D000DEB2010000000040FD9301000000004835
-:1041E000FD830100020000409B9B0100000000A530
-:1041F0009CB30100480300408132010058952044DF
-:10420000E0B101000494004043990100000000F275
-:1042100024B10100000C00EE968801000000004A65
-:1042200097F001004480A243976C00000000004218
-:10423000FD93010000C000A636B10100D01400407B
-:104240004799010005000040F59901000038004041
-:10425000F599010000060040F599010000000040BA
-:10426000F599010005100040F59901000209004090
-:10427000F599010004000040F59901006003004039
-:10428000813201008803004081320100A003004018
-:1042900081320100A2820040813201009A820040F6
-:1042A0008132010060952040E1B10100709520400D
-:1042B000E1B1010000000049DD9101000000004073
-:1042C00091B30100F99500408132010000000040E7
-:1042D00085B301005C952040E1B1010027820040D8
-:1042E0008132010090060040813201000000005F31
-:1042F0002F8101008D81004081320100FE95004038
-:10430000813201000000454081B2010000005540AB
-:1043100081B20100DD82004081B200000400004053
-:1043200081B200000400004081B20000040000409F
-:1043300081B200000400004081B20000040000408F
-:1043400081B200000400004081B20000040000407F
-:1043500081B200002800004047990100AF8200416F
-:10436000E1C1000078180040499901001905225464
-:10437000817C00006C80424081320000008200B4E9
-:1043800069DF010000001A449393010028000040F7
-:10439000479901001805004081B200000400004068
-:1043A00081B200000400004081B20000040000401F
-:1043B00081B200000400004081B20000040000400F
-:1043C00081B200000400004081B2000004000040FF
-:1043D00081B2000040820040813201007D80224095
-:1043E000976C00007A804240813200000000004F4C
-:1043F0006993010038810058699300005416004009
-:1044000047990100000000FEF4B101008005004062
-:1044100081B2000080804240813200000000004EE6
-:1044200069930100388100586993000040160040EC
-:10443000459901004005004049310100F615004052
-:10444000439901005C1600404599010000006EFA96
-:104450008EB00100C105004081B2000004000040A0
-:1044600081B200000400004081B20000040000405E
-:1044700081B200000400004081B20000040000404E
-:1044800081B200000400004081B20000040000403E
-:1044900081B200009680004081B20000408200405E
-:1044A0008132010096802240976C00009380424048
-:1044B000813200000000004F6993010038810058EC
-:1044C0006993000038050040813201001E00004859
-:1044D000B2CB0100D005004081B2000004000040D2
-:1044E00081B200000400004081B2000004000040DE
-:1044F00081B200000400004081B2000004000040CE
-:1045000081B200000400004081B2000004000040BD
-:1045100081B200008302004081B20000B802004076
-:1045200081B20000D49F004081B20000D59F0040BE
-:1045300081B20000D69F004081B20000D79F0040AA
-:1045400081B200007201004181C000005501514854
-:10455000FD93000055015248FD9300005501554957
-:10456000FD8300005501564AFD83000050019181F2
-:10457000803000005501454081B200005001918219
-:10458000803000005501464081B20000000000402C
-:1045900089B00100000000F880B00100000000F0C8
-:1045A00016B001002200000548C9010000000014F7
-:1045B00048C10100B48043303D0700000000009E68
-:1045C00085B0010000001B413DC3010004002042F2
-:1045D000ECB101000000004049B10100AE0300CB86
-:1045E000A3C901000000002046B10100000000D274
-:1045F000F1B10100000000D3F1B101000000004260
-:10460000F0B101000000004561B101002000002070
-:1046100062DD01000000A8D0E1B10000BF800040D1
-:1046200081B20000000000A898B0010004800040A2
-:104630008BB30000B1030040A1990100C780A242E2
-:10464000976F000000000045A1C1010000000000BC
-:1046500080B001000000A2048094000080153F4259
-:1046600097E301000000004049B101000000600331
-:10467000029401000000004007B00100040000CBDC
-:1046800099CB0100000000CCF3830100D180A2424D
-:10469000976F0000000000CBF3930100AE0300CB46
-:1046A000A3C901000000002044B101000000004443
-:1046B000F1B1010000000000F0B1010000000004B1
-:1046C000F0B10100000000A1E0B1010005000040D0
-:1046D000619901002000002062DD0100D880A8401F
-:1046E00081320000F9020020423101000000A241A5
-:1046F000056C0100000080CBDB9101000000194136
-:104700008BB301006000004061990100DE80A8B118
-:104710008C3300006000004061990100E080A8B186
-:1047200094330000E68014C681320000180000C6F1
-:1047300083F40100F482224F83040000C280004011
-:1047400081B20000FF0100C681880100000000C6A0
-:1047500097A30100C2801F5C9753000058821EC6B9
-:104760008132000000002F4381F00100EC80004006
-:1047700010C900003981004081B200006A81004008
-:1047800081B20000248200CA63B30000618100404E
-:1047900081B200004881004D83B000005281004E7C
-:1047A00061B100004181004085B000004881004CAB
-:1047B00083B000002481004085B00000E381004008
-:1047C00049B1000071810040C1B10000DF810040AB
-:1047D00081B200004181004085B00000F00300403C
-:1047E00049B10000F48200CA9BB300007B81004005
-:1047F000C1B100007F810040C1B10000868100404E
-:10480000C1B1000087810040C1B100008881004033
-:10481000C1B1000089810040C1B100008A8100401F
-:1048200081B000008A81004181B000001882004000
-:1048300081B20000978200BBABB30000258200CAA2
-:10484000CFB30000C803004049B10000E8030040B6
-:1048500081B200002682004081B20000F482004054
-:1048600081B20000E003004081B20000F48200CA7F
-:1048700077B300004981004D83B000005081004EA5
-:1048800061B10000418100BB85B000004981004C4E
-:1048900083B00000418100BB85B00000248100BBD3
-:1048A00085B000001681004081B20000F48200CA89
-:1048B0004DB300007005004049B10000A005004064
-:1048C00049B100001C8122428F6F00001E812241ED
-:1048D0008F6F000020811ECA8132000022811FCA12
-:1048E00081320000000000CAC9B10100F482004218
-:1048F0008FB30000000000CACDB10100F482004176
-:104900008FB30000000000CACFB10100F482004064
-:104910008FB30000008100A6C6B10100F482004000
-:1049200081B20000008000A6C6B10100F482004000
-:104930008FB30000781800404999010010002F9CA7
-:1049400089B001003B8100403933010018002F9BE2
-:1049500089B001003B8100403733010000002F9AED
-:1049600089B001003B8100403533010008002F99D8
-:1049700089B001003B81004033330100008000AE6C
-:1049800047C9010080000040F1990100000000CA01
-:10499000F1B1010000000042F0B1010040180040F8
-:1049A000E19901000000004561B10100200000AE66
-:1049B00063DD0100368128408132000033810040F0
-:1049C00081B2000036814240813200000000005C6C
-:1049D00069930100F4821A449393000039814240A4
-:1049E00081320000388100586993000000000044C3
-:1049F000F0D101000000A44081B200004081A2403B
-:104A0000E16D00000000004445D10100000080403D
-:104A1000E1B1010000008041E1D101004181375C3A
-:104A2000613100000000004262B101004581284070
-:104A3000813200004281004081B20000000000CAC3
-:104A400063B101004581A84081320000F482174023
-:104A500081B200004A81004081B000004A8100BB61
-:104A600081B000000000004160B101000000004082
-:104A700062B101004B81A84081320000000000CAF1
-:104A800063B10100F4822840813200004D81004072
-:104A900081B200005095004047990100538100BB4E
-:104AA00087B0000050952F4087B00100558122400B
-:104AB000957F0000F48260409583000002002DF095
-:104AC00084B001005681364081320000000000426F
-:104AD00062B101005781A84081320000000000430C
-:104AE00062B101005981A84081320000000000CA73
-:104AF00063B101005B81A8408132000000001640D4
-:104B000081B20100F482224143510000000800CA32
-:104B100095CB01005681004185C000006381A2420F
-:104B2000676F00000000004167B3010063814240ED
-:104B3000813200000000004065B301000000004029
-:104B40009383010000001ACA69970100F48226408D
-:104B5000813200006881424081320000F4821A44B0
-:104B600093930000F4822043956F0000F48280CA82
-:104B700067330000F4822240656F0000F482006F0A
-:104B8000DB91000085000040813201003580224029
-:104B900080320000F482004081B200000000005822
-:104BA000959301000000005F959301007781A24476
-:104BB000216F00000000005F958301000000005E8F
-:104BC000959301000000005795930100000000CA72
-:104BD000C3B101007A81225B957F00000000004B89
-:104BE000FD930100F482004081B200001BFD00CA69
-:104BF000959B01000D0100CAC53101000000005F56
-:104C000095830100F48200CAC5B10000DF6F00CABD
-:104C1000959B01000000005595930100000000CA1B
-:104C2000C7B10100F482225F957F00000D010040B2
-:104C3000813201000000005F95830100F48200CA08
-:104C4000C7B10000F48200CAC9B10000F48200CAF2
-:104C5000CBB10000F48200CACDB10000F48200CADA
-:104C6000CFB1000000002E4281E001009814004006
-:104C700048C90100F48200CAE1B100000000004010
-:104C800009B10100200000A682B001008F81A25E60
-:104C90000B7D000000800041089901009181A25E17
-:104CA0000B7D0000208000A608B1010093819F8544
-:104CB000823000000000003083840100C88122306F
-:104CC000836C00009281A24F0B7D00000000004128
-:104CD00021B30100028000A682B0010013820040CF
-:104CE000813201001000004184E40100038000A62D
-:104CF00082B001001382004081320100F0FF0041C8
-:104D00008688010000000043849401000F0000A683
-:104D100086B0010010C4004386980100A881A24318
-:104D2000846C00000000004321B30100200000A6B5
-:104D300082B001001C00004182DC0100A581A25E5E
-:104D40000B7D00000400004108990100BA81004079
-:104D500081B20000410100A686B00100500C004362
-:104D600086980100AD81A243846C000000000041E0
-:104D700021B30100BA81004081B20000410100A6C8
-:104D800086B00100600C004386980100BA81A243FE
-:104D9000846C00000000004221B30100188000A6CE
-:104DA00082B001001382004081320100FFFF004108
-:104DB0008288010000770041828C010001020041DD
-:104DC000829801002000004182DC010018000041AF
-:104DD00082DC0100B881A25E0B7D00000000004172
-:104DE00008B10100200000A682B00100BB81A25ED4
-:104DF0000B7D00004013004108990100C38122434C
-:104E0000216F0000200000A682B0010012000041C6
-:104E100082DC0100C081A25E0B7D00000004004125
-:104E200008990100DE81004081B20000200000A648
-:104E300082B001001900004182DC0100C581A25E40
-:104E40000B7D000000A0004108990100DE810040B8
-:104E500081B200000000004421B3010000000040C6
-:104E600083B001000000005F839001000000005E3D
-:104E70008390010000000057839001000000004172
-:104E8000C2B101000C010040813201000000005F4E
-:104E90008380010000000041C2B101000C0100400C
-:104EA00081320100200000A682B001000400004110
-:104EB00082DC01002000004108990100200000A6CA
-:104EC00082B001001100004182DC0100D781A25EA6
-:104ED0000B7D00000100004108990100200000A6A0
-:104EE00082B00100DA81A25E0B7D00004013004118
-:104EF00008990100010000A682B0010040000041B5
-:104F00002E9901000000804081B20100200000A61F
-:104F100080B00100000000CA81940100E181A25E1E
-:104F20000B7D0000F482004008B10000C8142EBBC5
-:104F300085B00100E481A25E0B7D0000000000400E
-:104F400087B00100F3812243216F000002822244D6
-:104F5000216F0000118000A682B001001382004082
-:104F6000813201000A82224A837C00000000004056
-:104F700087900100EE81224D837C000000000041FB
-:104F800087900100F081224F837C000000000043E5
-:104F900087900100F281224E837C000000000042D5
-:104FA000879001000A82004081B20000018000A6C3
-:104FB00082B001001382004081320100018000A60E
-:104FC00082B0010013820040813201000A82224235
-:104FD000837C000000000040879001001C8000A638
-:104FE00082B001001382004081320100FD81224520
-:104FF000837C00000000004187900100FF81224473
-:10500000837C00000000004387900100018222435E
-:10501000837C000000000042879001000A8200406B
-:1050200081B20000018000A682B00100138200401E
-:1050300081320100018000A682B00100138200408D
-:10504000813201000A822242837C0000000000407D
-:10505000879001000000004387900100000000419C
-:1050600087900100008000A682B0010013820040FA
-:10507000813201000E82224B837C00000000004040
-:105080008780010000000043E0B10100FF7F00A223
-:10509000A08B010000000044A5B30100B88000CA45
-:1050A000A73301003681004081B20000200000419A
-:1050B00082DC01001482A25E0B7D00000000004132
-:1050C00008B1010016829F858230000000008040F8
-:1050D00081B201001B8214F7813000001B82A249BB
-:1050E000FD7F000000000048FD9301001E8215F8BE
-:1050F000811400001E82A24AFD7F000000000048CB
-:10510000FD9301002082A2C88132000040000040CF
-:1051100080DC01000010004080DC01000000004045
-:10512000EFB3010022824240F13300003881004099
-:1051300068970000F48200BB6BB30000F48200BBF0
-:10514000B1B30000F482004081B2000000030040CF
-:10515000819801000000004018B10100800000406B
-:105160008398010000190040459901000000424069
-:1051700081B20100000043FFF1B10100000000FF17
-:10518000F1B101000000004181C0010000000040B9
-:1051900018B101002B82A24183500000001600408C
-:1051A00045990100001900404399010000000047A3
-:1051B00043C101000000004083B00100000000F383
-:1051C00080B001000000005B81D0010000000041C0
-:1051D00080D0010000000040F6B101000000005B3B
-:1051E00043C101000000004183C001003582A25488
-:1051F000836C000000000040F7B101000000004196
-:1052000083C001003C82A206836C00000000804045
-:1052100081B20100001600404399010080162E065D
-:1052200083B00100360000FBF6A901004282A241D2
-:10523000835000002200004083980100000000FB22
-:10524000F6B101004582A241835000006200004097
-:1052500095980100DC9F00408132010000162D0668
-:1052600083B0010080160040459901005C0000FBFE
-:10527000F6A901004B82A24183500000000000709B
-:10528000F9B1010000000071F9B1010000000072E5
-:10529000F9B1010000000073F9B1010000000074D1
-:1052A000F9B101005400004095980100DC9F0040D6
-:1052B000813201000000007095B001005782227019
-:1052C000B56F00000000804197B0010000008040F1
-:1052D00097B00100B6030040A199010000002F42E1
-:1052E00099B3010062822244816C00006A822248E4
-:1052F000816C00006482224C816C00006E8222501E
-:10530000816C00006F822254816C000071822258EF
-:10531000816C00007682225C816C000050010040AC
-:1053200081B20000000000BC09B00100F48200CA94
-:1053300001B000000000004003B001000000004187
-:10534000F38301006882A242056C00000000004166
-:1053500005B00100F48222CA07140000F48200465E
-:10536000F3930000F4822043956F0000F48280CA1A
-:1053700005300000F482220180300000F48200CB6E
-:10538000DB910000570100BCABB30000000000BC83
-:10539000B1B30100F48200CACFB30000FF0000CA1D
-:1053A00081880100F482A240747D000060002040EA
-:1053B000609901007382A8B18230000072820040BF
-:1053C00081B20000F48200CA79B300000000004EF0
-:1053D00081B0010000000043CB8301000000454084
-:1053E00081B201007982A241815000000000454055
-:1053F00081B201000000454081B2010084829182A7
-:10540000823000000000008A80B00100AE9F0040A2
-:1054100080CE01008282A640813200008482564004
-:1054200081B20000B6030040A199010000000053C2
-:1054300007900100B6030040A1990100000000524E
-:1054400007900100D89F00418BB300000000004E80
-:1054500081B0010000000042CD8301000000464001
-:1054600081B201008982A2418150000000004640C3
-:1054700081B201000000464081B201009482918116
-:10548000823000000000008980B00100AE9F004023
-:1054900080CE01009282A640813200009482554065
-:1054A00081B20000B6030040A19901000000005243
-:1054B00007900100B6030040A199010000000053CD
-:1054C00007900100D89F00418BB30000B10300405A
-:1054D000A1990100C4142F4099B301005701004065
-:1054E00049B10000A0942E4397B001000000004095
-:1054F000F1B101009B82A2419750000050952040DD
-:10550000E1B10100AC942E4397B0010000000040CF
-:10551000F1B101009F82A24197500000000080403D
-:1055200081B20100AE030040A399010000000040D9
-:1055300081B001006015004085980100080000401E
-:1055400040E40100000000594194010000000050B7
-:1055500041E00100000000424094010000000057BB
-:10556000419001000000004181C001000000A34201
-:10557000816C010000000041A3C10100A582A0428E
-:10558000816C0000A582005085C00000DD82A24130
-:10559000017D0000B5822258737D00007800004034
-:1055A00061990100B082A8B19C30000030003845FC
-:1055B0009DE001000100000E10C90000B58233C457
-:1055C00081300000B882A1AD9D200000AF82134061
-:1055D00081B200000000134E5A83010030003845AC
-:1055E0009DE00100C08222AB80040000BE82A24088
-:1055F000017D0000C082225F577D00003C87004093
-:1056000081B20000C082225E577D00009F8700406B
-:1056100081B20000C5822254737D000074000040F6
-:1056200061990100C082A8B1003000009084A25F9F
-:10563000017C0000D086004081B20000C782A25FDA
-:1056400059270000C982A25C737D0000D082A25E4F
-:10565000737D0000DA82225C737D0000DB823740BC
-:10566000813200007C00004061990100CA82A8B12B
-:10567000363000007C00004061990100CC82A8B166
-:10568000003000001F00000002880100BF841740A6
-:1056900081B20000DB823440813200007E00004095
-:1056A00061990100D182A8B112300000D882522144
-:1056B00013040000000014412FC30100FF3F000944
-:1056C000008C01000000004301F001001183003450
-:1056D00013840000FF3F1409008C01007183004314
-:1056E00001F000000000004081B20100DB82334085
-:1056F00081320000AF82134E5A9300001487A248F3
-:10570000FD7F00000400A2AC80320000E382225A38
-:10571000737D00007A00004061990100E082A8B129
-:105720007E310000010000CF11C90000E982A240D3
-:10573000937F0000E9822244937F0000E58242A526
-:1057400080300000E882A240937F0000FB821A4074
-:105750009393000000001A4081B20100DD80A24056
-:10576000737D00000F872244216F000006872240CE
-:10577000657D00000005A25B737D00000400A24966
-:10578000337D0000F3822248337D0000FF01009941
-:1057900080D801000000005081E00100A8982F404F
-:1057A00033B1010000000040E0C10100DD82004093
-:1057B00081B20000AF8200408BB3000000000058AF
-:1057C00061B101000000004E62B10100AF822840CB
-:1057D00081320000F682004081B20000F98233403D
-:1057E0001F300000AF82134E5A930000FD82A0CEFE
-:1057F000815000000F83A0CD816C0000000000A547
-:105800009CB30100000000B181B001000F8322B5FC
-:105810008114000080152F4049B1010001834240EE
-:1058200081320000000060B465970100D0152E4061
-:1058300069B3010000001A44938301001A0000A21A
-:1058400080DC010000000044F1B10100000000B163
-:10585000F1B10100000000B5F1B101000500004008
-:10586000619901008000004062DD01000A83A8A167
-:10587000E0310000E98200889EB30000E982A24185
-:10588000676F0000E982006FDB9100000F834240E8
-:1058900081320000E9821A409383000000990009D8
-:1058A00046C901003F0000F30C8801001A83A6429C
-:1058B00013600000299400950330010015836140B6
-:1058C0008132000075000040619901001683A8B183
-:1058D0000C30000036947110943001001B83005886
-:1058E0001F9000001C94009503300100AF820088D7
-:1058F0001CB0000000002D0348B1010004002DF091
-:105900002EB00100EE070040979801002283234B40
-:10591000E46D00002283224BFD7F00000000004068
-:105920001F90010022002F4081B2010025838317C0
-:105930008032000026000040479901002783851728
-:10594000803200000000004847C101002D8322552D
-:105950002F7C00000000004243D101000F0000FA3C
-:10596000968801000000004297E00100000000421C
-:1059700097D001002E83004B44C10000120000A20A
-:1059800044C90100280000F602CC01000A0000A171
-:1059900042C90100000000F816B00100000028F024
-:1059A00010B00100000000F01AB00100000000A2D9
-:1059B0002AB00100C0283C460DE0010000002D4443
-:1059C00095B001003A83A2F80E3000004A832241CC
-:1059D0009550000000002D5049C101003683004061
-:1059E00081B200003783A2F8166C00003783A2F85A
-:1059F000106C00003783A2F01A6C00004883225814
-:105A00001F7C000000993F4213F001003F83654076
-:105A1000813200004383A2F37406000000000006F8
-:105A2000E69501004883754081B200000000000641
-:105A300096B001003F0075F30C880100000000558E
-:105A400061B101000000004B62B101004683A84033
-:105A500081320000488367408132000050837741E3
-:105A60002DC300004E8322581F7C0000000000550B
-:105A700061B101000000000662B101004C83A84042
-:105A8000813200004E836740813200007E8377417F
-:105A90002DC30000030000071AF40100EF92000775
-:105AA000163001005F832241816C00005683224240
-:105AB000816C0000AF8200881CB000005E83225F12
-:105AC0000F7C0000E393005F011001005C83224023
-:105AD000956C00000480000342C90100000000F240
-:105AE00002B0010058930052953001005F93004BC3
-:105AF00002B0000041940009963001001A8700406E
-:105B00000FB000006783A25A1F7C0000699200401A
-:105B10008132010067832220856C000064839C0F22
-:105B200080320000AF8200881CB000004A93005C05
-:105B30001F0001003C95004261310100AF820088E6
-:105B40001CB00000900400079630010000002D05F5
-:105B500048B101006A8382F0183000008188004556
-:105B60008FB00000282000A696B001006E83221797
-:105B700096040000E094004B953001008188004BB2
-:105B80008FB00000EF93000348310100CA9100403C
-:105B9000813001008188004081B2000000002E1099
-:105BA00048B101000000685003B00100000000038C
-:105BB000F0B1010040000000E0C9010000002E50DB
-:105BC00049C1010000000050F1B1010000000003D4
-:105BD000F0B101000000004261B10100200000109E
-:105BE00062DD01007983A8408132000010000010BE
-:105BF00062C901007B83A800E0310000AF82008809
-:105C00001CB0000000002D0348B10100000000405E
-:105C10000FB00100000000F82EB00100000000F2FB
-:105C200002B001000000004017B00100004100A6D2
-:105C300096B00100EE072E4797900100918322173E
-:105C4000960400008F83224BFD7F00008F8323A2E8
-:105C5000026C00005893005295300100040022416C
-:105C6000975000000C002D0012B00100000000F061
-:105C700000B001000000005C018001005F93004B58
-:105C800002B000000000000900B001000000005058
-:105C900003B00100AE83005C17900000A383224391
-:105CA0002F7C0000000000451F9001009C83225FB4
-:105CB0002F7C000000002E1048B1010000000058A9
-:105CC000F1B1010010000003F0C901001000000054
-:105CD000E0C90100988362426131000000000010B9
-:105CE00062B101009983A84081320000AF827288BE
-:105CF0001CB0000020002D0348B10100FF0F00F68A
-:105D000080880100A083A2A6816C0000A38300F21A
-:105D10003AB000008D84A24BFD7F0000B09200409D
-:105D2000813201003087004081B20000AE83224AF8
-:105D30002F7C0000AE8322482F7C00000A002D0338
-:105D400048B101003F0000F2868801001F000043B7
-:105D5000848801000500004380F4010098943D42CE
-:105D600081E00100AE83A242E07D00008D84A24B61
-:105D7000FD7F0000B092004081320100308700407A
-:105D800081B20000AE83694081320000000000A3B0
-:105D900009B001000000794147C30100B48322A18A
-:105DA000096C0000F58200881CB00000B18300037C
-:105DB00048B10000EE83A392036C0000949500406C
-:105DC000953001000000004143C3010000000016AF
-:105DD00080B201003087270880320000BB83225C3C
-:105DE000177C0000BC8300002AB0000012000000F5
-:105DF0002AC801000200000880C80100C083A24335
-:105E00002F7C0000E394004081320100DC83005EBF
-:105E100017900000040000018CCC0100E394004CBA
-:105E20000330010000002E4602B0010010000010F7
-:105E300048C901000C000001F0CD01002C00004019
-:105E4000F0C9010000000016F0B1010010000015BB
-:105E5000E0C901000000004361B10100A00000A4FE
-:105E600062DD0100C983A85417100000DC83005EC6
-:105E700017900000120000002AC80100DB832243B3
-:105E80002F7C0000040000018CCC01000000004CBD
-:105E900003B00100049500436131010000002E466B
-:105EA00002B001001000001048C901000C00000100
-:105EB000F0CD01000C000009F0C90100000000183D
-:105EC000F0B1010010000015E0C90100000000431E
-:105ED00061B10100A00000A462DD0100DC83285450
-:105EE00017100000D883004081B2000004950043E1
-:105EF00061310100DE8322502F7C0000000000563B
-:105F0000179001000700001798880100E183A24163
-:105F1000996C00000000005517900100000000433C
-:105F200061B101004000001062DD0100E283A84081
-:105F300081320000AF8200881CB00000EB9400406A
-:105F400081320100E98322432F7C00001680000388
-:105F500044C901000000001DE4B101008C94005E02
-:105F600005100100EC83A25F2F7C0000A6910001C8
-:105F700038430100B0920040813201003087004078
-:105F800081B20000F083A24BFD7F00008A840041B3
-:105F900043C300000000004027B0010000000040A3
-:105FA0002DB001000000004011B00100F383350165
-:105FB000863000006D00004061990100FB8328B12C
-:105FC00030300000F483224D757D00000000001683
-:105FD00080B201007A84A740116C000000000041EB
-:105FE00043C301008984004081B200006D0000407D
-:105FF00061990100FB83A8B1123000000000001677
-:1060000080B201000584A740116C0000000000412F
-:1060100043C301000000000910B001000000001897
-:106020002CB00100DE07004380CE0100F483AA40BB
-:10603000813200000A84004081B2000040003E43EB
-:1060400027E0010000000009F0B101000000001885
-:10605000E0B101000000004127C00100F483A30B60
-:1060600087500000000015401BB0010000000040F8
-:1060700023B00100120000002AC8010040002D409A
-:1060800039B001001284A240276C000022000008F1
-:1060900012C80100DE070040259801001584004069
-:1060A00081B20000000000F812B00100000000F012
-:1060B00030B001000000000B25B00100000000100E
-:1060C00032B0010014002001E0B10100EE070040F1
-:1060D000379801001A842301366C0000000000018B
-:1060E00036B001002584824123400000208000104A
-:1060F00042C9010021842240E36D000000000043FA
-:1061000061B101004000001062DD01001E84A84062
-:1061100081320000AF8200881CB00000CF920043A3
-:10612000233001000000001032B0010000000041E7
-:1061300023B001000000000348B1010000800019F5
-:1061400044C90100348422451F7C00000000004C3B
-:10615000F1B1010000000009F0B1010000000018D9
-:10616000F0B101000000004361B1010020000019FE
-:1061700062DD01002B84A815E03100000000005012
-:1061800003D001000000005033C001000000004CAB
-:1061900025D001000C002D4C13C001000000005060
-:1061A00037D00100000000502BC001001A840045C8
-:1061B0001F8000003684A312366C00003784681BF1
-:1061C00028B000000000681228B00100000000099B
-:1061D000F0B1010000000018F0B101000000004320
-:1061E00061B101002000001962DD01003A84A815A8
-:1061F000E0310000608422140250000000000050D2
-:1062000033C001000000001424D001000C002D1444
-:1062100012C001005984A214365000004A84225C46
-:106220001F7C00003080001042C9010048842240D9
-:10623000E36D00000000004261B101004000001069
-:1062400062DD01004584A84081320000AF820088F1
-:106250001CB000000000000348B101000C002D5CE0
-:106260001F800100100000F02AC801000000005C3F
-:106270002B800100F0070040379801004F84230174
-:10628000366C00000000000136B001005A84221B69
-:10629000026C00003000001048C9010000002E5CB4
-:1062A0001F90010000000050F1B101000000000348
-:1062B000F0B10100FF070015E08D01000000004271
-:1062C00061B10100A00000A462DD01005684A84075
-:1062D000813200005A84000348B10000000000141D
-:1062E0002AC001001A84A240256C00000000004171
-:1062F00039C0010040003D4339E001000000000BBF
-:1063000025B00100000000F812B001001A8400F06E
-:1063100030B000000080001942C9010066842240AC
-:10632000E36D00000000004361B10100400000196E
-:1063300062DD01006384A84081320000AF820088E2
-:106340001CB00000CF9200402B30010018002E033B
-:1063500048B101006A8422502F7C000000000056E2
-:106360001790010007000017988801006D84A24172
-:10637000996C0000000000551790010070842243C2
-:106380002F7C000000000054179001001600201D13
-:10639000E4B101007284A340276C00007484605F44
-:1063A000179000000084000B16DC01000000601351
-:1063B000169401008C94005E051001003087A25FE6
-:1063C0002F7C00001480000342C90100000000F28D
-:1063D00002B00100A691000138430100308700405F
-:1063E00081B200000000004083B001000000004DB9
-:1063F00061B101000000001662B101007C84A84078
-:10640000813200000000000862B101007E84A840D3
-:106410008132000089842213826C000040003D43D9
-:1064200083E00100000000F810B00100000000F05F
-:106430002CB001000000001662B101008484A84065
-:10644000813200000000000862B101008684A8408B
-:10645000813200008084004183C0000000001540AC
-:1064600081B20100008200A604B00100A0980040A3
-:1064700047990100300500418930010058930052CE
-:10648000953001005F93004B02B000003087004060
-:106490000FB000000000005F01800100100000004C
-:1064A0000EF401003F000000008801000300000717
-:1064B0001AF40100EF920007163001009B8422417C
-:1064C000816C000099842242816C0000AF820088B8
-:1064D0001CB000009A84225F0F7C00001A870040E5
-:1064E0000FB00000A384A25A1F7C000069920040F4
-:1064F00081320100A3842220856C0000A0849C0FBF
-:1065000080320000AF8200881CB000004A93005C1B
-:106510001F0001003C95004261310100AF820088FC
-:106520001CB00000900400079630010000002D050B
-:1065300048B10100000000F018B00100A984223A1F
-:10654000016C0000000000008EB001008188004056
-:1065500001B000000000004081B201002E002D05B6
-:1065600048B10100AD84A240E76D00000A00004080
-:106570008F9801008188004001B0000034920040F3
-:10658000813201001C94009503300100AF82008825
-:106590001CB0000000002D0348B1010022002DF0C6
-:1065A0002EB00100282000A696B00100B684221764
-:1065B00096040000E094004B953001008188004C67
-:1065C0008FB00000B88483178032000000000044C0
-:1065D00043C10100BA8485178032000000000048E2
-:1065E00043C10100280000F602CC0100120000A106
-:1065F0002AC80100EF93004081320100CA91004196
-:10660000813001008188004081B20000000000015B
-:1066100000D0010000002E1048B101002800004009
-:10662000F199010000000003F0B10100000000003A
-:10663000F0B10100C4846447613100000000001023
-:1066400062B10100C584A81BE0310000AF827488EC
-:106650001CB000000000004503E0010008002D030D
-:1066600048B10100EA8401FB083000003D8587FB4A
-:1066700022300000000000FA0EB00100000000F817
-:1066800014B00100030000071AF40100EF920007A4
-:1066900016300100E0842241816C0000D484224243
-:1066A000816C0000AF8200881CB00000DF84225F94
-:1066B0000F7C0000380000047E890100D884A65FAA
-:1066C0000F0000004292004005300100DD840040D0
-:1066D00081B20000130000408798010000002D03E4
-:1066E00048B101000C002DF082B00100000000F064
-:1066F00084B00100CE930040053001000000005C32
-:106700001F9001001A8700400FB00000E884A25AD1
-:106710001F7C00006992004081320100E884222041
-:10672000856C0000E5849C0F80320000AF820088F9
-:106730001CB000004A93005C1F0001003C95004221
-:1067400061310100AF8200881CB000009004000796
-:106750009630010000002D0548B10100000000F056
-:1067600018B00100EC84210480200000ED8400407A
-:1067700010C90000C387004B81B000000C850043A6
-:1067800081B00000108500FB22B00000C3870041EB
-:1067900081B000008188004E8FB000000885005A4B
-:1067A0008FB00000F58400478FB00000C38700530E
-:1067B00081B00000C387005681B0000032002D0573
-:1067C00048B101008188A00AE46D0000FB84A24169
-:1067D000197C0000FA84220A80320000818800536C
-:1067E0008FB00000818800548FB000000485220A19
-:1067F00080320000FE84A20AE46D00008188005D02
-:106800008FB00000000000F280B001000000000A1C
-:1068100080D001000285A091816C00008188005E1B
-:106820008FB00000250000408F9801008188004053
-:1068300081B2000006852091E56D0000818800543A
-:106840008FB00000210000408F9801008188004037
-:1068500081B2000032002D0548B101008188A00AF4
-:10686000E46D0000240000408F9801008188004002
-:1068700081B2000037002D0548B10100040000F38B
-:1068800082F40100C387A042836C0000C3870054D8
-:1068900081B00000000000F20EB00100030000070C
-:1068A0001AF4010000B5000D42C9010007000007FD
-:1068B000168801001985220BE67D00000A000040C1
-:1068C00087980100DF950040813201000000004000
-:1068D0000FB001001A87005C1F9000002B8522502A
-:1068E000FD7F00002685A254FD7F00001E852255F5
-:1068F000FD7F00008200004087980100168500405F
-:1069000081B2000016852253FD7F00001480000331
-:1069100042C90100000000F096B001001000004BD9
-:1069200080F401000CBC00408798010026852243BA
-:10693000806C0000FFFF004B808801001685A24399
-:10694000806C00007C9600404799010027854640F6
-:10695000813200002A85A0F0306F00001C851E40A7
-:1069600081B2000000001E4131C30100739200405B
-:10697000253001002F859C0F80320000AF820088F7
-:106980001CB000004A93005C1F000100148000034B
-:1069900042C90100000000F096B0010000002F0580
-:1069A00048B101001000000718E401000008000CC5
-:1069B000E0990100900400079630010000B5000D39
-:1069C00046C9010036853040813200000000000BCE
-:1069D000E6910100000200A146C901000000000B81
-:1069E000E691010004002E0548B1010000001040AE
-:1069F000E1B10100C387004081B00000000000FB4E
-:106A000028B00100000000FB86B00100000000F883
-:106A100014B0010047852246237C000043852240B4
-:106A2000877C0000000000481F900100458522413E
-:106A3000877C0000000000471F900100478522422C
-:106A4000877C0000000000451F9001004785661B01
-:106A50002C300000000000A013B0010000007641BF
-:106A600041C3010076852392156C00007685A2450E
-:106A70001F7C00007A85224BFD7F0000170000D0AC
-:106A8000A2C901000000004027B001000200000A76
-:106A900024C80100AB9200400F3001007485220829
-:106AA0004030000000000041A3C10100F0070012C7
-:106AB00024CC01005085AA412740000001000013AA
-:106AC00080CC01007085264023300000000000408B
-:106AD00083B001006000000384C8010010000010B2
-:106AE00048CD0100170000D0A2C901005D85A24079
-:106AF000836C00006985004183B000000080004283
-:106B000044990100000068213896010000002E50D1
-:106B100049C101006285A244236C000030000003DB
-:106B200048C9010000000044F1B101000C00002040
-:106B3000F0C901000000004461B10100A00000A400
-:106B400062DD01006585A842E031000000000044DC
-:106B500085C001000000004123C001000000004189
-:106B6000A3C101005B85A2418150000070852240D5
-:106B7000236C00000000004461B1010040000010DF
-:106B800062DD01006D85A84081320000AF8200887F
-:106B90001CB000000000000348B10100EE070040F7
-:106BA00025980100170000D02AC80100838500172E
-:106BB00010B0000095940040813201007A850040B9
-:106BC00081B20000AB92009225300100000000402D
-:106BD00031B001007A8522082E3000008385004103
-:106BE00027B00000808000A604B00100060000402D
-:106BF00087980100DF95000A8C30010000000040FA
-:106C00000FB001000000005C1F9001008285229FF0
-:106C1000136C0000020000881CCC0100F5820040CB
-:106C200081B200001A8700413FC30000000000400D
-:106C30000FB001002800000180CE010097852A4096
-:106C4000813000000080001044C901004000004075
-:106C5000819801008C85A2481F7C00008C85A2478A
-:106C60001F7C00008C85A307036C0000800000409F
-:106C7000819801008F85A340026C0000280000016C
-:106C8000F0CD0100918500400FB0000028000040C9
-:106C9000F0CD0100040000400ECC010028000003EC
-:106CA000F0C9010028000000F0C901000000001632
-:106CB000E0B101000000004761B1010020000010B8
-:106CC00062DD01009585A85C1F10000000000040F7
-:106CD00043990100000000F008B00100A0012D4020
-:106CE00000C001006186220F42050000A8859C0FAC
-:106CF000803200000000005C1F8001000080001056
-:106D000042C90100A3852240E36D00000000004756
-:106D100061B101004000001062DD0100A085A840C3
-:106D200081320000AF8200881CB00000A8852207D5
-:106D3000803200000000000342B1010000000007A3
-:106D400042C10100008000A1469901000000005FDF
-:106D5000E1910100C006A2451F7C00001000000365
-:106D600048C9010000002D5429C00100000000F8AE
-:106D700018B00100000000F804B00100000000F8A5
-:106D80000EB00100420000030AC801000C0000A47C
-:106D90000CC80100ED920040813201000000001497
-:106DA00002B001000000001424D001000000001413
-:106DB00010C001001200000810C8010000000040CF
-:106DC00023B00100FE7F000544C901000000000A55
-:106DD000E4B10100D18522018032000000003C4472
-:106DE00023E0010000002EA480B00100000000108C
-:106DF00048C10100BE85A307026C0000BF85680181
-:106E00001AB00000000068071AB001000000000D71
-:106E100002D0010000000005F0B101000000000CEC
-:106E2000F0B1010000000002E0B101000000000D1F
-:106E30000AC00100CB852240036C0000CB852242B2
-:106E4000236C00000000004123C001000000004747
-:106E500061B10100A00000A462DD0100EF852840BF
-:106E600081320000C885004081B20000000000109F
-:106E700080C001000000004761B101000000004037
-:106E800062B10100CD85A84023300000AF820088A8
-:106E90001CB00000EF85004081B2000000003C44BF
-:106EA00023E00100000000A486B0010000002E10C5
-:106EB00048C10100D685A3120E6C0000D78560077B
-:106EC0001AB00000000060121AB001000000680D46
-:106ED00016940100FFFF000B16D80100000068089F
-:106EE0003E9601000000000CF0B10100000000021D
-:106EF000E0B101000000001086C001000000004663
-:106F000061B101002000004362DD0100DE85A85C64
-:106F10001F1000000D86220D146C0000E485220D68
-:106F2000246C00000000000D10C00100E885000D79
-:106F300024D00000000000412BC00100000000151B
-:106F4000A2B101001000002010C80100F0070040AD
-:106F500025980100EA852242236C0000EF8500415C
-:106F600023C000000000004661B101004000001095
-:106F700062DD0100EB85A85C1F000000AF82008885
-:106F80001CB000000000004023B001000D86220D5F
-:106F9000145000000C86A20D0E500000FB85224606
-:106FA0001F7C0000000000461F80010030800010A0
-:106FB00042C90100F9852240E36D0000000000474E
-:106FC00061B101004000001062DD0100F685A840BB
-:106FD00081320000AF8200881CB0000020800003D6
-:106FE000469901000000005FE191010000002D06BC
-:106FF00048B10100000000F818B00100000000F8DE
-:1070000004B0010000861FF00E300000B885004C6F
-:107010000DC0000000002E5F0F800100B88523071F
-:10702000146C00003000001048C90100240000402A
-:10703000F199010000000003F0B101000000000020
-:10704000F0B1010000000016F0B1010024000000C2
-:1070500000C801000000004761B10100A00000A4C9
-:1070600062DD01000986A8461F100000B8850003F4
-:107070000CB00000B885000D18C0000004002E14EC
-:107080000AD001001200000548CD0100FE7F000576
-:1070900042C901000C002AF2E0B10100138622402F
-:1070A000316C000000006018389601001E0000409E
-:1070B00043990100008100F680CE01001786A640AA
-:1070C000813200000000004443C101001986220BF8
-:1070D000ED6D0000080000A142C90100020000A1FE
-:1070E00046C901000F0000FA948801000200004A1E
-:1070F00086E40100000000F60EB001002186224760
-:107100001F7C000004001F430E5000002186A04693
-:107110000F400000000000410FC0010025862248FA
-:107120001F7C00000000004091B0010004000FA28D
-:10713000423100002886004089B000000C0000A207
-:1071400042C901000000004389B001000000004373
-:1071500095D00100000000FC82B001002B86A04108
-:10716000904000000000004191C00100308622479D
-:107170001F7C00003086A043896C000030862045CB
-:10718000896C00003086A0410E40000000000041E4
-:107190000FC001000000004189C001002886A24103
-:1071A00095500000398622481F7C000010000048DE
-:1071B00092F40100FFFF0048908801003786904854
-:1071C000924000000000004193C001000A0000A2AC
-:1071D00044C901000000662093A401003080001023
-:1071E00044C9010012000014F0C90100000000179A
-:1071F000F0B1010012000005E0CD010030000010E8
-:1072000080C801000000004461B10100200000407E
-:1072100062DD01003F86A840813200004A86225C80
-:107220001F7C000000003C4423E0010000002D1002
-:1072300048C1010049862240E36D0000000000467D
-:1072400061B101004000001062DD01004686A840E7
-:1072500081320000AF8200881CB000000000005C9A
-:107260001F8001004D86A2471F7C0000E392004072
-:1072700081320100C686001710B00000EA9200407B
-:107280008132010000002F0348B101005186A007A0
-:10729000164000000000004117C001000000000B74
-:1072A000E4B101000000005017F00100558690F293
-:1072B000164000000000004117C0010000006620D9
-:1072C00017A40100100000142AC80100000000509B
-:1072D0002BE00100000000F22A9401003080001031
-:1072E00042C901005F862240E36D000000000044B7
-:1072F00061B101004000001062DD01005C86A84021
-:1073000081320000AF8200881CB0000000800017AE
-:1073100010DC0100C686004081B2000069869C0F27
-:10732000803200000000005C1F800100008000101F
-:1073300042C9010069862240E36D00000000004759
-:1073400061B101004000001062DD01006686A840C6
-:1073500081320000AF8200881CB000006E862207D8
-:10736000803200000000000342B10100000000076D
-:1073700042C10100008000A1469901000000005FA9
-:10738000E191010004002E0348B101000000000A51
-:10739000E0B1010073862240316C00000C00004017
-:1073A00045990100000060183896010000002E1079
-:1073B00048B1010000000050F1B1010000000008D8
-:1073C000F0B1010000000003E0B101000000004442
-:1073D00061B101000000001062B101007886A84090
-:1073E00023300000AF8200881CB0000000002D5246
-:1073F00011C001001000000348C90100000000F89E
-:1074000018B00100000000F804B00100000000F80E
-:107410000EB001000C0000A40CC8010000003C44A8
-:1074200023E00100000000A486B0010000002E103F
-:1074300048C101008686A3120E6C0000878668078B
-:107440001AB00000000068121AB00100000000101D
-:1074500086C00100000068083E9601000000000C94
-:10746000F0B1010000000002E0B1010000000046A0
-:1074700061B101002000004362DD01008C86A85C40
-:107480001F100000BB86220D146C00009286220D96
-:10749000246C00000000000D10C001009686000D55
-:1074A00024D00000000000412BC0010000000015A6
-:1074B000A2B101001000002010C80100F007004038
-:1074C0002598010098862242236C00009D86004189
-:1074D00023C000000000004661B101004000001020
-:1074E00062DD01009986A85C1F000000AF82008861
-:1074F0001CB000000000004023B001000400220D79
-:1075000014500000BA86A20D0E500000A986224633
-:107510001F7C0000000000461F800100308000102A
-:1075200042C90100A7862240E36D00000000004729
-:1075300061B101004000001062DD0100A486A84096
-:1075400081320000AF8200881CB000002080000360
-:10755000469901000000005FE191010000002D0646
-:1075600048B10100000000F818B00100000000F868
-:1075700004B00100AE861FF00E3000008186004C82
-:107580000DC0000000002E5F0F80010081862307E0
-:10759000146C00003000001048C9010024000040B5
-:1075A000F199010000000003F0B1010000000000AB
-:1075B000F0B1010000000016F0B10100240000004D
-:1075C00000C801000000004761B10100A00000A454
-:1075D00062DD0100B786A8461F1000008186000307
-:1075E0000CB000008186000D18C00000C486225C2B
-:1075F0001F7C00000000005C1F80010000003C4474
-:1076000023E0010000002D1048C10100C486224083
-:10761000E36D00000000004661B101004000001071
-:1076200062DD0100C186A84081320000AF8200887F
-:107630001CB000000000001710B00100C68600401A
-:107640002BB00000008000034499010000000004FA
-:10765000E0B10100CB86229F136C0000020000887D
-:107660001CCC0100F582004081B20000F095004181
-:107670003F430100000000408DB0010000000040C9
-:1076800005B00100DF9500400F3001003087005C3D
-:107690001F900000100000000EF401000000003AEE
-:1076A00001840100030000071AF40100EF920007B3
-:1076B00016300100DA862241816C0000D886224211
-:1076C000816C0000AF8200881CB00000D986225F68
-:1076D0000F7C00001A8700400FB00000E286A25A1B
-:1076E0001F7C00006992004081320100E286222066
-:1076F000856C0000DF869C0F80320000AF8200881E
-:107700001CB000004A93005C1F0001003C95004241
-:1077100061310100AF8200881CB0000090040007B6
-:107720009630010000002D0548B10100000000F076
-:1077300018B001000000000080B00100C387A25F04
-:10774000816C0000A8002D431980010037002DF046
-:1077500024B00100040000F38EF401000F0000F3D8
-:1077600090880100F18622488E6C000036000040AF
-:107770004399010058003D43E7E10100F1861FF005
-:10778000246C0000F08623418F6C0000C387004703
-:1077900081B00000C387004881B000004000004075
-:1077A00043990100B0002DF014B00100F686220AC2
-:1077B00090400000C395004091300100C387A24073
-:1077C00080320000B0002D4581B00100028722F018
-:1077D0002C300000A3002D3083B00100AC002DF34D
-:1077E00082E00100FC86A3412C6C00000000001622
-:1077F00082B0010098002DF082C0010088002DF0B9
-:1078000082D00100000000F298E80100C387204CFC
-:10781000826C00007C002D4198E80100C38720F0B5
-:10782000986C00001A87220A803200004002000C87
-:107830007E8901001A87A64081320000C387004973
-:1078400081B00000200000A680B001000A8722431A
-:10785000216F00001380004080DC01000B87004096
-:1078600081B200001A80004080DC01000B87A25E1C
-:107870000B7D00000000004008B101000D879F85CE
-:10788000803200001187004081B20000EC8222406B
-:10789000577D0000010000405799010011874240C8
-:1078A000813200000000004493930100DD821A5BE6
-:1078B00069930000040000CB81C8010017872240B3
-:1078C000F27F0000C480006F9733010019872240C7
-:1078D000737D0000DE8000418BB300001487004000
-:1078E00081B2000021879C0F8032000000800010D0
-:1078F00042C9010021872240E36D000000000045DD
-:1079000061B101004000001062DD01001E87A84047
-:1079100081320000AF8200881CB000004592220234
-:107920008032000022874240813200000000004483
-:107930009393010045921A02689700002C879C0FD0
-:10794000803200000080001042C901002C872240D4
-:10795000E36D00000000004561B10100400000102F
-:1079600062DD01002987A84081320000AF820088D3
-:107970001CB000004F922202803200002D8742404E
-:107980008132000000000044939301004F921A02DC
-:107990006897000037879C0F80320000008000103D
-:1079A00042C9010037872240E36D00000000004516
-:1079B00061B101004000001062DD01003487A84081
-:1079C00081320000AF8200881CB00000F9822202E0
-:1079D00080320000388742408132000000000044BD
-:1079E0009393010000001A0268970100F982004099
-:1079F00005B00000008000A656B1010056952F404A
-:107A000005B001008887A240E76D0000B8942941C5
-:107A1000E7B1010000000054EF930100000000F204
-:107A20000EB00100290000400D9801000900000778
-:107A300012E40100000000A713C0010003000007CA
-:107A40001AF401000700000716880100FFFF00106C
-:107A500034D801000000000334940100000000400D
-:107A600023B00100201800401198010000B5000D5E
-:107A700042C901006C87220BE67D00004D87604003
-:107A800081320000FFFF000784890100548705C28E
-:107A900024300000580400408132010000002D0510
-:107AA00048B10100898770F0183001006C870040F0
-:107AB00081B200000000704081B201006387A048DD
-:107AC000236C00000000005035D001000080001A37
-:107AD00042C901005D872240E36D000000000042C2
-:107AE00061B101004000001A62DD01005A87A84020
-:107AF00081320000AF8200881CB000002098004056
-:107B000043990100898700F8183001005E87A2417F
-:107B100023500000FFFF001034D8010000000003D4
-:107B200034940100201800401198010000002E1A22
-:107B300048B1010000000044F1B10100000000085C
-:107B4000F0B101000000004261B101002000001A04
-:107B500062DD01006787A809E031000000000041F4
-:107B600023C001000000005035C0010000000044A7
-:107B700011C00100788722410D5000000000004133
-:107B80000FC001007487A0AA0F6C00000000004124
-:107B90000FB001000900000712E40100000000A777
-:107BA00013C00100000000401BB001004B870041E2
-:107BB00017B000000002000912C801004B87834182
-:107BC000174000000000004017B001004B87004143
-:107BD0001BC0000083872340236C0000000000507E
-:107BE00035D001000080001A42C901008087224080
-:107BF000E36D00000000004261B101004000001A86
-:107C000062DD01007D87A84081320000AF820088DC
-:107C10001CB000002098004043990100898700F8BB
-:107C2000183001008187A24123500000000000416C
-:107C30000FC001008687A0AA0F6C00000000004161
-:107C40000FB00100B8942007E4B101005695204020
-:107C5000E7B101001A8700400FB00000FFFF000CE1
-:107C600080D80100C002000C7E8901009B87265449
-:107C7000613100009187870C803200000F000040C6
-:107C80006299010091872840813200009187A254B7
-:107C9000777D00008D87004081B2000096872246E4
-:107CA000197C00000D000040629901000000A8400E
-:107CB00081B200000000A254777D0100928700404D
-:107CC00081B200009B872249197C00000E00004011
-:107CD000629901000000A84081B200000000A25497
-:107CE000777D01009687004081B2000010000040BF
-:107CF000629901000000A84081B200000000A25477
-:107D0000777D01009B87004081B2000030942F55A1
-:107D1000F1930100004000A656B10100F982A24192
-:107D2000E551000064000040E5990100A38744404C
-:107D300081320000A687A293576F00000000004127
-:107D400057C3010000001CAB27B30100F982225089
-:107D5000FD7F0000F9822251FD7F0000F982A241DF
-:107D60001D530000504600401D9B01003805004097
-:107D7000813201000E000048B2CB01001004004027
-:107D800049310100B2872240B56F00000E00004863
-:107D9000B2CB010020040041B5530100F98200403C
-:107DA00081B2000000000051FD8301004016004038
-:107DB0004599010040050040493101001E0000487E
-:107DC000B2CB01001004004081320100000000DA53
-:107DD00091C0010004000048B2CB01002004004023
-:107DE000B533010060162040E5B10100408200403B
-:107DF000B533010008000048B2CB0100FFFF004A84
-:107E0000B48B010020040040813201000A000048C8
-:107E1000B2CB01001000004AB4F70100200400407A
-:107E200081320100F982004081B20000050000406B
-:107E300043990100000000F308B001000400204055
-:107E4000E6B101000300004096E4010000000004D8
-:107E500096C00100C987004B10C90000EC8A0041A0
-:107E600009B00000040000208FB0000004000020D2
-:107E70008FB00000040000208FB00000040000203C
-:107E80008FB00000040000208FB00000040000202C
-:107E90008FB00000040000208FB00000040000201C
-:107EA0008FB00000208B004109B0000004000020CA
-:107EB0008FB00000040000208FB0000004000020FC
-:107EC0008FB00000040000208FB0000004000020EC
-:107ED0008FB00000040000208FB0000004000020DC
-:107EE0008FB00000040000208FB00000528B0045CE
-:107EF00009B00000528B004509B00000528B0045CC
-:107F000009B00000528B004509B0000004000020B9
-:107F10008FB00000040000208FB00000040000209B
-:107F20008FB00000040000208FB00000918B004350
-:107F300009B00000BA8B004309B00000BE8B0044BA
-:107F400009B00000098D004509B0000004000020C0
-:107F50008FB00000040000208FB00000040000205B
-:107F60008FB00000040000208FB00000040000204B
-:107F70008FB00000CA8B004309B00000C98B0043DA
-:107F800009B00000EA8A004509B0000004000020A2
-:107F90008FB00000040000208FB00000040000201B
-:107FA0008FB00000040000208FB00000798C0042E8
-:107FB00009B00000798C004309B00000798C0044BE
-:107FC00009B00000EA8A004509B000000400002062
-:107FD0008FB00000040000208FB0000004000020DB
-:107FE0008FB00000040000208FB0000004000020CB
-:107FF0008FB00000998C004309B0000004000020FD
-:108000008FB00000EA8A004509B00000040000209B
-:108010008FB00000040000208FB00000040000209A
-:108020008FB00000040000208FB00000040000208A
-:108030008FB00000B78C004309B00000B78C00443B
-:1080400009B00000EA8A004509B0000004000020E1
-:108050008FB00000040000208FB00000040000205A
-:108060008FB00000040000208FB00000040000204A
-:108070008FB00000B78C004209B00000040000205F
-:108080008FB00000EA8A004509B00000040000201B
-:108090008FB00000040000208FB00000040000201A
-:1080A0008FB00000040000208FB00000040000200A
-:1080B0008FB00000DF8C004409B0000004000020F5
-:1080C0008FB00000EA8A004509B0000004000020DB
-:1080D0008FB00000040000208FB0000004000020DA
-:1080E0008FB00000040000208FB00000EA8A004238
-:1080F00009B00000F08C004509B00000F08C00458C
-:1081000009B00000EA8A004509B000000400002020
-:108110008FB00000040000208FB000000400002099
-:108120008FB00000040000208FB00000F28C0042ED
-:1081300009B00000F28C004309B00000F28C00444A
-:1081400009B00000F28C004509B0000004000020D6
-:108150008FB00000040000208FB000000400002059
-:108160008FB00000040000208FB000000400002049
-:108170008FB00000040000208FB00000FA8C004493
-:1081800009B00000EA8A004509B0000004000020A0
-:108190008FB00000040000208FB000000400002019
-:1081A0008FB00000040000208FB000000B8D004253
-:1081B00009B00000FB8C004309B000000B8D0044A7
-:1081C00009B00000EA8A004509B000000400002060
-:1081D0008FB00000040000208FB0000004000020D9
-:1081E0008FB00000040000208FB0000004000020C9
-:1081F0008FB000000C8D004309B00000028D0044D8
-:1082000009B00000EA8A004509B00000040000201F
-:108210008FB00000040000208FB000000400002098
-:108220008FB00000EA8A004109B00000778C00425C
-:1082300009B00000778C004309B00000778C00443F
-:1082400009B00000EA8A004509B0000004000020DF
-:108250008FB00000040000208FB000000400002058
-:108260008FB00000EA8A004109B000000D8D004285
-:1082700009B000000D8D004309B000000D8D0044D1
-:1082800009B00000EA8A004509B00000040000209F
-:108290008FB00000040000208FB000000400002018
-:1082A0008FB00000040000208FB000000400002008
-:1082B0008FB00000040000208FB0000004000020F8
-:1082C0008FB00000148D004509B0000004000020AC
-:1082D0008FB00000040000208FB0000004000020D8
-:1082E0008FB00000168D004209B00000040000208D
-:1082F0008FB00000040000208FB0000004000020B8
-:108300008FB00000040000208FB0000004000020A7
-:108310008FB00000040000208FB000000400002097
-:108320008FB00000040000208FB00000228D0043B9
-:1083300009B00000818D004309B00000BE8B0044ED
-:1083400009B00000098D004509B0000004000020BC
-:108350008FB00000040000208FB000000400002057
-:108360008FB00000040000208FB000000400002047
-:108370008FB00000898D004309B00000BE8B00441F
-:1083800009B00000098D004509B00000040000207C
-:108390008FB00000040000208FB000000400002017
-:1083A0008FB00000040000208FB000000400002007
-:1083B0008FB000009A8D004309B000000400002037
-:1083C0008FB00000EA8A004509B0000004000020D8
-:1083D0008FB00000040000208FB0000004000020D7
-:1083E0008FB00000040000208FB000008E8B00438F
-:1083F00009B00000858D004309B00000BE8B004429
-:1084000009B00000098D004509B0000004000020FB
-:108410008FB00000040000208FB0000007002D0581
-:1084200048B10100000000F308B001000600204739
-:10843000E6B101000400004796E401000000004797
-:1084400096D001000000004796D001000000000413
-:1084500096C001008988004B10C90000B28D004908
-:1084600009B000000400002085B0000004000020D6
-:1084700085B000000400002085B00000040000204A
-:1084800085B000000400002085B00000040000203A
-:1084900085B000000400002085B00000040000202A
-:1084A00085B000000400002085B00000040000201A
-:1084B00085B000000400002085B00000040000200A
-:1084C00085B000000400002085B0000004000020FA
-:1084D00085B00000EB8D004209B0000004000020D0
-:1084E00085B000000400002085B0000004000020DA
-:1084F00085B000000400002085B0000004000020CA
-:1085000085B000000400002085B0000004000020B9
-:1085100085B000000400002085B0000004000020A9
-:1085200085B000000400002085B000000400002099
-:1085300085B000000400002085B000000400002089
-:1085400085B00000F18D004609B000000400002055
-:1085500085B000000400002085B000000400002069
-:1085600085B000000400002085B000000400002059
-:1085700085B000000400002085B000000400002049
-:1085800085B000000400002085B000000400002039
-:1085900085B000000400002085B000000400002029
-:1085A00085B000000400002085B000000400002019
-:1085B00085B000000400002085B00000FF8D00425F
-:1085C00009B000000400002085B00000218E0042A8
-:1085D00009B000000400002085B000000400002065
-:1085E00085B000000400002085B0000004000020D9
-:1085F00085B000000400002085B0000004000020C9
-:1086000085B000001C8E004A09B000000400002064
-:1086100085B000000400002085B0000004000020A8
-:1086200085B000000400002085B00000248E0043C7
-:1086300009B000000400002085B000007D8E0044D9
-:1086400009B000000400002085B0000004000020F4
-:1086500085B000000400002085B000000400002068
-:1086600085B000000400002085B000000400002058
-:1086700085B000007C8E004B09B000000400002093
-:1086800085B000000400002085B000000400002038
-:1086900085B00000F48D004109B000000400002006
-:1086A00085B00000F48D004309B00000F48D004453
-:1086B00009B00000F48D004509B00000F48D0046BB
-:1086C00009B00000F48D004709B00000F48D0048A7
-:1086D00009B00000F48D004909B00000F48D004A93
-:1086E00009B00000F48D004B09B00000F48D004C7F
-:1086F00009B00000F48D004D09B000000400002016
-:1087000085B000000400002085B00000DC8E00422F
-:1087100009B000000400002085B00000DC8E004499
-:1087200009B000000400002085B000000400002013
-:1087300085B000000400002085B000000400002087
-:1087400085B000000400002085B000000400002077
-:1087500085B00000DC8E004B09B000000400002052
-:1087600085B000000400002085B000000400002057
-:1087700085B000000400002085B000000400002047
-:1087800085B00000F48E004509B000000400002010
-:1087900085B000000400002085B000000400002027
-:1087A00085B000000400002085B000000B8F00475A
-:1087B00009B000000400002085B00000E88E0045EC
-:1087C00009B000000400002085B000000400002073
-:1087D00085B000005491004609B00000040000205C
-:1087E00085B000000400002085B0000004000020D7
-:1087F00085B000000400002085B0000004000020C7
-:1088000085B00000218E004609B00000FF8D0046B3
-:1088100009B000001A8E004709B000001A8E004807
-:1088200009B000000400002085B000000400002012
-:1088300085B000000400002085B000001C8E004AB6
-:1088400009B000000400002085B0000004000020F2
-:1088500085B000000400002085B000000400002066
-:1088600085B000000400002085B000000400002056
-:1088700085B000007D8E004509B00000248E0043C5
-:1088800009B000001A8E004709B000001A8E004897
-:1088900009B000000400002085B0000004000020A2
-:1088A00085B000000400002085B000007C8E004CE4
-:1088B00009B000000400002085B000000400002082
-:1088C00085B000000400002085B0000004000020F6
-:1088D00085B000000400002085B0000004000020E6
-:1088E00085B00000118F004409B00000118F0042D4
-:1088F00009B00000D58A004709B00000D58A0048B9
-:1089000009B000000400002085B000000400002031
-:1089100085B000000400002085B00000118F004BDE
-:1089200009B000000400002085B000000400002011
-:1089300085B00000F48D004109B00000348F00477D
-:1089400009B000000400002085B000001C8F004723
-:1089500009B000000400002085B0000004000020E1
-:1089600085B000000400002085B000000400002055
-:1089700085B000000400002085B000000400002045
-:1089800085B000001C8F004709B0000004000020E3
-:1089900085B000000400002085B000000400002025
-:1089A00085B000000400002085B000000400002015
-:1089B00085B000000400002085B000000400002005
-:1089C00085B000001C8F004709B00000348F0047BD
-:1089D00009B000001A8E004709B000001A8E004846
-:1089E00009B000000400002085B000000400002051
-:1089F00085B000000400002085B000001C8F0047F7
-:108A000009B000000400002085B000000400002030
-:108A100085B000000400002085B0000004000020A4
-:108A200085B000000400002085B000000400002094
-:108A300085B000000400002085B000000400002084
-:108A400085B00000438F004709B00000438F004805
-:108A500009B000000400002085B0000004000020E0
-:108A600085B000000400002085B000000400002054
-:108A700085B000000400002085B000000400002044
-:108A800085B00000A68F004009B00000C48F0047E9
-:108A900009B00000B88F004809B00000148F0047EB
-:108AA00009B00000148F004709B00000C48F0047D0
-:108AB00009B00000CB8F004709B00000CB8F004801
-:108AC00009B000000400002085B00000B88F004805
-:108AD00009B00000148F004709B00000148F004750
-:108AE00009B00000B88F004809B000000400002061
-:108AF00085B000000400002085B0000004000020C4
-:108B000085B00000DC8E004309B0000004000020A6
-:108B100085B00000DC8E004509B00000DC8E004608
-:108B200009B000001A8E004709B000001A8E0048F4
-:108B300009B000000400002085B00000DC8E004A6F
-:108B400009B000000400002085B00000DC8E004C5D
-:108B500009B000000400002085B0000004000020DF
-:108B600085B000000400002085B00000338F00476E
-:108B700009B00000278F004809B000001B8F004794
-:108B800009B000001B8F004709B00000338F004779
-:108B900009B00000D58A004709B00000D58A004816
-:108BA00009B000000400002085B00000278F0048B5
-:108BB00009B000001B8F004709B000001B8F004761
-:108BC00009B00000278F004809B000000400002011
-:108BD00085B000000400002085B00000CD8F004269
-:108BE00009B000000400002085B00000CD8F0044D3
-:108BF00009B000000400002085B00000040000203F
-:108C000085B000000400002085B0000004000020B2
-:108C100085B000000400002085B0000004000020A2
-:108C200085B00000CD8F004B09B00000040000208B
-:108C300085B000000400002085B000000400002082
-:108C400085B000000400002085B000000400002072
-:108C500085B00000CD8F004309B000000400002063
-:108C600085B00000CD8F004509B00000CD8F0046D3
-:108C700009B00000CD8F004709B00000CD8F00483B
-:108C800009B000000400002085B00000CD8F004A2C
-:108C900009B000000400002085B00000CD8F004C1A
-:108CA00009B00000CD8F004C09B000000400002086
-:108CB00085B000000400002085B000000400002002
-:108CC00085B00000E88F004609B0000004000020D5
-:108CD00085B000000400002085B0000004000020E2
-:108CE00085B000000400002085B000000B8F004715
-:108CF00009B000000400002085B00000E88F0046A5
-:108D000009B000000400002085B00000040000202D
-:108D100085B000000400002085B0000004000020A1
-:108D200085B000000400002085B000000400002091
-:108D300085B00000E990004609B000000400002062
-:108D400085B000000400002085B000000400002071
-:108D500085B000000400002085B000000B8F0047A4
-:108D600009B000000400002085B00000E990004632
-:108D700009B000000400002085B0000004000020BD
-:108D800085B00000E990004609B000000400002012
-:108D900085B000000400002085B000000400002021
-:108DA00085B000000400002085B000000E91004254
-:108DB00009B000000400002085B00000040000207D
-:108DC00085B000000400002085B0000004000020F1
-:108DD00085B000000400002085B0000004000020E1
-:108DE00085B000000D91004A09B000000400002089
-:108DF00085B000000400002085B0000004000020C1
-:108E000085B000000400002085B0000004000020B0
-:108E100085B000000400002085B0000004000020A0
-:108E200085B000000E91004609B00000040000204B
-:108E300085B000001A8E004709B000001A8E004865
-:108E400009B000000400002085B0000004000020EC
-:108E500085B000000400002085B000000D91004A9C
-:108E600009B000000400002085B0000004000020CC
-:108E700085B000000400002085B000000400002040
-:108E800085B000000400002085B000000400002030
-:108E900085B000000400002085B000000400002020
-:108EA00085B000000400002085B000000400002010
-:108EB00085B00000D88F004109B0000004000020F8
-:108EC00085B000000400002085B0000004000020F0
-:108ED00085B000000400002085B0000004000020E0
-:108EE00085B000000400002085B00000E58F00423E
-:108EF00009B000000400002085B00000E58F0044A8
-:108F000009B000000400002085B00000040000202B
-:108F100085B000000400002085B00000040000209F
-:108F200085B000000400002085B00000040000208F
-:108F300085B00000E58F004B09B000000400002060
-:108F400085B000000400002085B00000040000206F
-:108F500085B000000400002085B00000040000205F
-:108F600085B00000E58F004309B000000400002038
-:108F700085B00000E58F004509B00000E58F004690
-:108F800009B00000E58F004709B00000E58F0048F8
-:108F900009B000000400002085B00000040000209B
-:108FA00085B000000400002085B00000E58F004C73
-:108FB00009B000000400002085B00000040000207B
-:108FC00085B000000400002085B0000004000020EF
-:108FD00085B00000F48E004C09B0000004000020B1
-:108FE00085B000000400002085B0000004000020CF
-:108FF00085B000000400002085B000000B8F004702
-:1090000009B000000400002085B00000E88E004C8C
-:1090100009B000000400002085B00000040000201A
-:1090200085B00000A591004609B0000004000020B2
-:1090300085B000000400002085B000004991004286
-:1090400009B000000400002085B0000049910044F0
-:1090500009B000000400002085B0000004000020DA
-:1090600085B000000400002085B00000040000204E
-:1090700085B000000400002085B00000040000203E
-:1090800085B000004991004B09B0000004000020A9
-:1090900085B000000400002085B00000040000201E
-:1090A00085B000000400002085B00000040000200E
-:1090B00085B000000400002085B0000004000020FE
-:1090C00085B000004991004509B000004991004673
-:1090D00009B000001A8E004709B000001A8E00483F
-:1090E00009B000000400002085B00000040000204A
-:1090F00085B000000400002085B000004991004CBC
-:1091000009B000000400002085B000000400002029
-:1091100085B000000400002085B00000E88E004209
-:1091200009B000005491004609B00000040000207E
-:1091300085B000000400002085B00000E88E0046E5
-:1091400009B000000400002085B000000B8F00472C
-:1091500009B000000400002085B0000054910046D2
-:1091600009B000000400002085B0000004000020C9
-:1091700085B000005491004609B0000004000020B2
-:1091800085B000000400002085B00000040000202D
-:1091900085B000005891004309B000000400002091
-:1091A00085B000000400002085B00000040000200D
-:1091B00085B000000400002085B000000B8F004740
-:1091C00009B000000400002085B000005891004361
-:1091D00009B000000400002085B000000400002059
-:1091E00085B000005891004D09B000000400002037
-:1091F00085B000000400002085B0000004000020BD
-:1092000085B000000400002085B000006A91004392
-:1092100009B000000400002085B000000400002018
-:1092200085B000000400002085B00000040000208C
-:1092300085B000000400002085B00000040000207C
-:1092400085B000004791004A09B0000004000020EA
-:1092500085B000000400002085B00000040000205C
-:1092600085B000000400002085B00000040000204C
-:1092700085B000000400002085B00000040000203C
-:1092800085B000006A91004309B00000040000208E
-:1092900085B000001A8E004709B000001A8E004801
-:1092A00009B000000400002085B000000400002088
-:1092B00085B000000400002085B000004791004AFE
-:1092C00009B000000400002085B000000400002068
-:1092D00085B000000400002085B0000004000020DC
-:1092E00085B000007C91004309B00000040000201C
-:1092F00085B000000400002085B0000004000020BC
-:1093000085B000000400002085B000000B8F0047EE
-:1093100009B000000400002085B000007C910043EB
-:1093200009B000000400002085B000000400002007
-:1093300085B000007C91004D09B0000004000020C1
-:1093400085B000000400002085B00000FF8D0042C1
-:1093500009B000000400002085B00000218E00420A
-:1093600009B000000400002085B0000004000020C7
-:1093700085B000000400002085B00000040000203B
-:1093800085B000000400002085B00000040000202B
-:1093900085B000009B91004209B00000040000204D
-:1093A00085B000000400002085B00000040000200B
-:1093B00085B000000400002085B0000004000020FB
-:1093C00085B000000400002085B0000004000020EB
-:1093D00085B00000218E004609B00000FF8D0046D8
-:1093E00009B000001A8E004709B000001A8E00482C
-:1093F00009B000000400002085B000000400002037
-:1094000085B000000400002085B000009B9100465C
-:1094100009B000000400002085B000000400002016
-:1094200085B000000400002085B00000040000208A
-:1094300085B000009D91004A09B0000004000020A2
-:1094400085B000000400002085B00000040000206A
-:1094500085B000000400002085B000000B8F00479D
-:1094600009B000000400002085B000009D91004A72
-:1094700009B000000400002085B0000004000020B6
-:1094800085B000005591004609B00000040000209E
-:1094900085B000000400002085B00000040000201A
-:1094A00085B000005591004609B00000040000207E
-:1094B00085B000000400002085B0000004000020FA
-:1094C00085B000000400002085B000000B8F00472D
-:1094D00009B000000400002085B00000559100464E
-:1094E00009B000000400002085B000000400002046
-:1094F00085B000005591004609B00000040000202E
-:1095000085B000000400002085B0000004000020A9
-:1095100085B000000400002085B00000A391004247
-:1095200009B000000400002085B000000400002005
-:1095300085B000000400002085B000000400002079
-:1095400085B000000400002085B000000400002069
-:1095500085B000004791004A09B0000004000020D7
-:1095600085B000000400002085B000000400002049
-:1095700085B000000400002085B000000400002039
-:1095800085B000000400002085B000000400002029
-:1095900085B00000A391004609B00000040000203F
-:1095A00085B000001A8E004709B000001A8E0048EE
-:1095B00009B000000400002085B000000400002075
-:1095C00085B000000400002085B000004791004AEB
-:1095D00009B000000400002085B000000400002055
-:1095E00085B000000400002085B00000248E004DEE
-:1095F00009B000000400002085B000000400002035
-:1096000085B000000400002085B0000004000020A8
-:1096100085B000000400002085B000000400002098
-:1096200085B000000400002085B000000400002088
-:1096300085B000000400002085B000000400002078
-:1096400085B000000400002085B000000400002068
-:1096500085B000000400002085B000000400002058
-:1096600085B000000400002085B000000400002048
-:1096700085B000000400002085B00000248E004D5D
-:1096800009B000001A8E004709B000001A8E004889
-:1096900009B000000400002085B000000400002094
-:1096A00085B000000400002085B000000400002008
-:1096B00085B000000400002085B0000007002E4B9C
-:1096C0001990010025870004E6B10000D58A2242E6
-:1096D000197C00009A94003A81300100D58A00403C
-:1096E00081B20000D58A2242197C0000FF1F000FC2
-:1096F0001E8C01000594004081320100E58A9C0F18
-:10970000803200000000005C1F800100008000101B
-:1097100042C90100E58A2240E36D000000000045D7
-:1097200061B101004000001062DD0100E28AA84042
-:1097300081320000AF8200881CB00000A9842202A0
-:1097400080320000E68A424081320000000000447E
-:109750009393010000001A0268970100A984004059
-:1097600005B0000005002E4B19900100258700046C
-:10977000E6B100000000004087B00100000000409A
-:109780008DB001000080000342C90100400000A12B
-:1097900044C90100000000F0E0B10100DF950006BF
-:1097A000074001000000000607D00100D4002E5C35
-:1097B0001F90010000000007F0B101000C800003C1
-:1097C00042C90100000000F0F0B1010000000040BB
-:1097D00081B20100000000FE96B00100000000FE12
-:1097E00096C00100000000F0F0B101000000004050
-:1097F00081B20100000000FE96C00100000000FEE2
-:1098000096C00100000000F0F0B10100000000402F
-:1098100081B20100000000FA96C00100000000FEC5
-:1098200096C001000030004B948801000000004603
-:1098300095F001000000004A96C001005E012E3440
-:10984000978401000200004BE4E501006401204020
-:10985000E1B101000900000786E4010000002EA725
-:1098600087C001001000001048C90100100000402E
-:10987000F199010058010043F0C9010058010005A9
-:10988000E0C901000000004461B10100A00000A493
-:1098900062DD01000F8BA84081320000000000054E
-:1098A00048B101001A0000409798010008002E40BE
-:1098B00095B00100178B204B946C00000000004015
-:1098C000F1B10100148B004195C000001080001020
-:1098D00042C901001E8B2240E36D000000000044DD
-:1098E00061B101004000001062DD01001A8BA84048
-:1098F00081320000AF8200881CB00000000000052B
-:1099000048B101009A94004081300100EA8A004089
-:1099100081B200000C80000342C90100000000F881
-:1099200086B00100000000F888B00100238B44409D
-:1099300081320000268BA24CFD7F0000278B004C5B
-:10994000FD930000288B20F0566F0000000000F00F
-:1099500056B3010000001C4081B2010000800010DD
-:1099600044C9010064000040F19901007000000545
-:10997000F0C9010000000043F0B101000000004701
-:1099800061B101002000001062DD01002E8BA844AF
-:10999000E0310000100000108CC80100008000467B
-:1099A00044C9010040000040F19901006801000530
-:1099B000F0C9010064000043F0C901000000004745
-:1099C00061B101000000004662B10100368BA8447D
-:1099D000E0310000AF8200881CB0000009000007E1
-:1099E00086E4010038002EA787C001008B002D05FA
-:1099F00048B101003E8B2243E77D00000000004497
-:109A000045C10100418B2244E77D00000000004C6D
-:109A100045C101000000004A19900100680120A220
-:109A2000E4B101008800004043990100458B230BFD
-:109A3000E56D000000000041199001000080001059
-:109A400044C9010050000040F19901005801004351
-:109A5000F0C9010058010005E0C901000000004400
-:109A600061B101000000001062B101004A8BA84002
-:109A700081320000AF8200881CB000005C002E051F
-:109A800048B101000080000342C90100000060F0FD
-:109A900096B001009A94004181300100EA8A0040AA
-:109AA00081B20000558BA249197C0000860000405D
-:109AB00047990100598B0040E5B1000086002F490D
-:109AC00019800100598BA2F2803200008B00004007
-:109AD0004799010000000042E79101005C8BA2461B
-:109AE000197C0000A000004047990100608B0040F5
-:109AF000E5B10000A0002F4619800100608BA2F2A2
-:109B0000803200008B0000404799010000000041B6
-:109B1000E7910100A80000404399010034002DF0B6
-:109B200024B00100000000FB0CB00100000000FBAD
-:109B300010B00100000000FB12B001000F0000F3A4
-:109B400016880100040000F314F401008B8B2640FA
-:109B500081320000738B220A166C000058003D43CE
-:109B600013E00100000000F882B00100040022F0C0
-:109B7000843000008795004081320100AF82008868
-:109B80001CB000000000000548B1010000000041C9
-:109B900013C00100728BA043136C00000000004052
-:109BA00013B00100688B004115D000008B8B220A96
-:109BB0008032000058003D4313E00100000000F82F
-:109BC00082B00100040022F084300000879500403C
-:109BD0008132010040002040E1B10100AF820088E5
-:109BE0001CB000000000000548B101008B8B224131
-:109BF000155000000000004111C001007F8BA04300
-:109C0000116C00000000004011B0010058003D43FD
-:109C100011E00100000000F836B00100040022F05D
-:109C2000003000000000005083B00100D9940047CC
-:109C300061310100AF8200881CB000004292000533
-:109C4000483101000000004561B1010040000010F2
-:109C500062DD0100878BA84081320000AF8200885E
-:109C60001CB000007B8B000548B10000370020408D
-:109C7000E7B101000B95005181300100EA8A0040F4
-:109C800081B2000034002E41F5B101000011004006
-:109C9000E5990100938B00481990000034002E4193
-:109CA000F5B1010000110040E599010000800003BA
-:109CB00042C90100000000F894B00100988B2245D1
-:109CC000237C0000B0002FF08CB00100000060F099
-:109CD0008CC00100900000404399010035002DF038
-:109CE0008CB0010058003E43E7E101009D8B224803
-:109CF000197C0000000000418DC001000000680ACE
-:109D00008CC0010038002A4AE0B1010028000000A0
-:109D1000E0C901003C00201BE0B1010010800003FD
-:109D200042C90100000000F838B00100000000F84E
-:109D300026B00100040022F802300000AB8B2301A2
-:109D4000146C0000000000F880B00100000000F872
-:109D500082B001004C0020F0E4B10100440020403A
-:109D6000E0B1010048002041E0B10100A8002D1041
-:109D700032B00100C39500F024300100B48BA2443E
-:109D8000816C0000B28B2241197C00006E93004070
-:109D90003B300100D88BA2083C300000B48B00405F
-:109DA00081B20000AB92004081320100D88BA20842
-:109DB0003C3000005000201CE0B101005400201392
-:109DC000E0B101004E002001E4B101004000200A92
-:109DD000E0B101000B95005F81300100EA8A00408C
-:109DE00081B2000037000040479901004D9300F315
-:109DF00094300100938B224A80320000C08B0040D7
-:109E000081B2000037000040479901004D9300F3F4
-:109E10009430010058003E4397E001000000001B11
-:109E2000F0B101001F006000008C0100EA8A85117A
-:109E3000803200000480000342C90100B0002FF00E
-:109E40008CB00100000060F08CC001000B95005F39
-:109E500081300100EA8A004081B20000CA8B0049CB
-:109E600019800000CF8B2241197C00006E930040C6
-:109E70003B300100D38BA2083C3000000B95005F03
-:109E800081300100EA8A004081B20000AB920040BC
-:109E900081320100D38BA2083C3000000B95005F9B
-:109EA00081300100EA8A004081B2000050002D108C
-:109EB00032B0010054002DF038B001004E002DF0FA
-:109EC00026B0010040002DF202B00100000000F0B9
-:109ED00014B00100300000108CC801000080004662
-:109EE00044C9010068012D4461B10100100068F20D
-:109EF00080C8010000000008F0B101005801000511
-:109F0000E0C901000000000B37B001000000004074
-:109F100036D001005C012E4010C001000000000698
-:109F200080C001000000005281D00100A0940040D8
-:109F3000E43101002000004662DD0100E48BA8400E
-:109F400023300000E592004081320100ED92004094
-:109F500081320100F28B82412340000020800010FA
-:109F600042C90100EF8B2240E36D00000000004673
-:109F700061B101004000001062DD0100EC8BA840DF
-:109F800081320000AF8200881CB000000000000594
-:109F900048B101000000001032B001000000004193
-:109FA00023B001000080001944C90100FA8B22414E
-:109FB000197C0000F68BA3010C6C0000F78B0006E7
-:109FC00004B000000000000104B00100F98B200281
-:109FD000366C00000000001B04B00100FD8B000285
-:109FE000E0B10000FC8BA3010C6C0000FD8B0006AF
-:109FF00004B000000000000104B00100000068028D
-:10A0000016940100FFFF000B16D80100000068083D
-:10A010003E9601000000001CF0B101000000004667
-:10A0200061B101002000001962DD0100028CA8135B
-:10A03000E0310000398C22021450000044002D024F
-:10A040000CD00100298CA20202500000108C225C6E
-:10A050001F7C00002080000342C901000F8C2240B9
-:10A06000E36D00000000004761B1010040000010F6
-:10A0700062DD01000B8CA84081320000AF820088B5
-:10A080001CB000000000000548B1010044002D5C38
-:10A090001F80010048002DF038B001004C002DF069
-:10A0A00026B0010038002FF202B001002A8C2201F4
-:10A0B000146C00001D8C22461F7C0000000000462E
-:10A0C0001F80010020002D0348B101001C8C22409C
-:10A0D000E36D00000000004461B101004000001089
-:10A0E00062DD0100198CA84081320000AF82008837
-:10A0F0001CB0000038002F0548B10100000000F836
-:10A1000094B0010038002DF096B001000000004C22
-:10A11000E1C101002000000348C901000000224AFB
-:10A12000F1B1010044000005F0C901000000004A3F
-:10A13000F0B101000000004BE0B101000000004759
-:10A1400061B10100A00000A462DD0100268CA85CC2
-:10A150001F1000002A8C000548B10000000000021A
-:10A1600038C00100348C220680320000000000500C
-:10A1700033C00100328CA202366C000004008F0D47
-:10A1800042310000100000F810C801000000005C1F
-:10A1900011800100F007004037980100E88B00A112
-:10A1A0001AB000000000000210C00100E88B00029D
-:10A1B00036D000005000201CE0B1010054002013F4
-:10A1C000E0B101004E002001E4B101004000200A8E
-:10A1D000E0B101003E8C005F01B0000037002D4669
-:10A1E00001B00100040000F380F401003D8CA043A5
-:10A1F000816C00000000005501B0010040002040CB
-:10A20000E1B101000080001942C90100448C2240E4
-:10A21000E36D00000000004661B10100400000193C
-:10A2200062DD0100418CA84081320000AF820088CD
-:10A230001CB00000EA920040813201003080001022
-:10A2400042C901004B8C2240E36D00000000004435
-:10A2500061B101004000001062DD0100488CA8409F
-:10A2600081320000AF8200881CB0000060012F0521
-:10A2700048B101000000000BE4B1010000000050F3
-:10A2800017F00100508C90F21640000000000041D1
-:10A2900017C001000000662017A40100320000A6CC
-:10A2A0002AC00100000000F22A940100538C4548A6
-:10A2B0006131000000D0001E62DD0100588C284092
-:10A2C00005300000548C2248777D00005B8C0040F4
-:10A2D00081B200000000001562B10100648C2840CA
-:10A2E00081320000588C004081B2000000001D0047
-:10A2F00092B00100618C2241197C000000800003B3
-:10A3000042C90100B09200F8003001005E8CA24109
-:10A310003B500000658C004900B00000FF07001EA4
-:10A32000008C0100B092004081320100658C004930
-:10A3300000B0000000001D4719800100688C225FFA
-:10A34000016C0000ED95004081320100C5870000DE
-:10A3500080B000006F8C225C1F7C00002080000316
-:10A3600042C901006F8C2240E36D000000000047ED
-:10A3700061B101004000001062DD01006C8CA8405A
-:10A3800081320000AF8200881CB000006F8C400555
-:10A3900048310000FFFF000794890100758C85CAD1
-:10A3A00094300000ED95185C1F0001000E00000FB6
-:10A3B0001E8C0100E686004081B200000B9518005B
-:10A3C00080300100EA8A0047198000000000004048
-:10A3D00019800100EA8A2247197C0000AB920040F4
-:10A3E000813201007C8CA20880320000EA8A0040A1
-:10A3F00081B20000A09400400D3001009C0100409B
-:10A4000045990100FFFF000B988801008B002D503B
-:10A4100017F00100828C904C1640000000000041B3
-:10A4200017C00100848C2243E77D00000000004437
-:10A4300045C101000000662017A40100680100402A
-:10A44000439901005C012EF280B0010002006240DD
-:10A450007ECD01000000005781C0010000002E10D9
-:10A4600048B1010003000040F08D01000000000829
-:10A47000F0B1010058010005E0C9010000000044EE
-:10A4800061B101000000001062B101008E8CA84093
-:10A4900081320000AF8200881CB00000000000057F
-:10A4A00048B10100928C454861310000005000081D
-:10A4B00062DD0100988C284005300000938C224812
-:10A4C000777D0000B0921D0800300100EA8A00404C
-:10A4D00081B20000EA8A1D47198000003500004063
-:10A4E00047990100010063F384C801009D8CA043DB
-:10A4F000856C00000000634085B00100A8000040AA
-:10A500004399010037002FF024B00100010063F3EC
-:10A5100082CC0100A88CA2419E060000EA8A224457
-:10A5200083700000360000404399010058003D430D
-:10A53000E7E10100EA8A1FF0246C0000ED95004875
-:10A5400081300100C5872341836C0000C587004727
-:10A5500081B0000058003D4385E00100000000F894
-:10A5600036B00100000000F000B0010028000040FB
-:10A5700083980100D994004761310100AF820088BF
-:10A580001CB0000000002D0348B1010008002DF0B0
-:10A5900094B00100000000F88EB0010090002DF092
-:10A5A00014B001000000000548B10100998BA240E1
-:10A5B0008F7C0000B68C22478F7C0000998B00486E
-:10A5C00019900000258D004081B2000036002D5DFD
-:10A5D00005B4010037002DF380B00100000000F346
-:10A5E0008EB001005C003D4381E00100A8002DF029
-:10A5F00094B00100000000F024B001002000001021
-:10A6000086DC01004080000344C90100B191004A8A
-:10A61000F031010036002F5C1F900100C48CA25065
-:10A620008F50000034002040E1B10100EA8A004070
-:10A6300081B200000000634181C00100C78CA043CB
-:10A64000816C00000000634081B0010037002047AA
-:10A65000E6B10100EA8A2247803200000400004788
-:10A660000CF401000000004F8F840100DC8C2247B5
-:10A670000C6C000058003D4381E00100DC8C1FF0B1
-:10A68000246C00000000005C1F80010000800010AE
-:10A6900042C90100D58C2240E36D00000000004556
-:10A6A00061B101004000001062DD0100D28CA840C1
-:10A6B00081320000AF8200881CB00000D58C42407F
-:10A6C00005300000000000449393010000001A5D73
-:10A6D00069930100DA8C23410D6C0000B78C0005F2
-:10A6E00048B10000ED95000548310100C5870048DC
-:10A6F00081B00000EA8A22408F6C00000B95005F59
-:10A7000081300100EA8A004081B20000A2000040CE
-:10A7100043990100000000F384B00100A6002D4918
-:10A7200019900100020000F280F40100B8002D40F1
-:10A7300081B20100000000F280C001000000004072
-:10A7400082F801001900004081980100EB8CA040C4
-:10A75000826C00002C01004081980100EB8CA3402A
-:10A76000826C00000000004180B00100ED8C204CA4
-:10A77000856C00000000004185C00100860020407B
-:10A78000E4B10100A2002042E6B10100EA8A0040E3
-:10A7900081B200009A94005081300100EA8A0040A2
-:10A7A00081B200000480000342C90100040022F0CD
-:10A7B00080300000000000408DB00100DF950040B7
-:10A7C00087300100B0002F5C1F900100000060F096
-:10A7D00080C001000B95005F81300100EA8A0040D3
-:10A7E00081B200000400004081B20000EA8A2246E3
-:10A7F000197C0000A000004047990100010062F2AE
-:10A8000096CC0100EA8AA640813200000B95004AEE
-:10A8100081300100E094004695300100EA8A004052
-:10A8200081B20000EA8A2249197C000086000040BB
-:10A8300047990100010062F280CC0100EA8AA6403B
-:10A84000813200000B95004A81300100E0940047FE
-:10A8500095300100EA8A004081B200004292004037
-:10A8600081320100EA8A005C1F900000EA8A004001
-:10A8700081B20000EA8A004081B20000BA000040C4
-:10A8800047990100010062F280C80100118D9040DB
-:10A8900080320000FFFF624081980100A400004068
-:10A8A00047990100EA8A2240E56D0000EA8A0041EA
-:10A8B000E5C100009A94004D81300100EA8A004011
-:10A8C00081B200005C00004047990100040022F0C2
-:10A8D0009630000000000040E1B10100008000035C
-:10A8E00044C901000000004BE0B10100000000403D
-:10A8F0008DB00100DF950040873001008B000040E3
-:10A9000047990100218D80F396300000000000403F
-:10A91000E78101000000004719900100EA8A005C0D
-:10A920001F900000340000404599010001000040E4
-:10A93000F599010000110040E5990100AB9200403B
-:10A9400081320100368DA2088032000037000040BD
-:10A9500047990100000000F382B00100000063513C
-:10A9600083D001003400004047990100010063F3E7
-:10A9700084CC01002E8D9F42803200000000634293
-:10A9800085B001000000004503F001000000000157
-:10A9900000C00100308D375C613100000000001BF9
-:10A9A00062B10100318DA84B1910000000000000B9
-:10A9B00062B10100338DA840813200001A87174030
-:10A9C00081B200000080000342C9010090002DF018
-:10A9D00094B00100AC002DF030B0010035002DF036
-:10A9E00028B0010058003E43E7E1010001000018D3
-:10A9F000F0C901000000004AE0B101003800200069
-:10AA0000E0B101003C00201BE0B10100400020400B
-:10AA1000E1B10100000000402BB00100EF940040C4
-:10AA20000D3001000000001816C00100458DA01473
-:10AA3000164400000000004117C001000E0000A2F3
-:10AA400044C9010000000018F8B10100B0002D1445
-:10AA5000F8B1010010500040879801004E8D224A45
-:10AA6000197C00000030004386C801000030000B54
-:10AA700016C801004E8DA440813200000000004144
-:10AA800017C0010001006E43869801002695003032
-:10AA900081300100528DA0411740000000000041AC
-:10AAA00017C00100598D224A197C0000080000A23D
-:10AAB00044C90100CC002DABF9B10100000000AB8E
-:10AAC00017C00100588DA0F016440000000000419E
-:10AAD00017C00100000064F082B001009000004047
-:10AAE000459901000000604131C00100BC000040F8
-:10AAF000439901005F8D060C80320000A00020F217
-:10AB0000E4B1010004000946191000009C01004056
-:10AB100045990100FFFF000B988801008B002D5024
-:10AB200017F00100648D904C1640000000000041B9
-:10AB300017C00100668D2243E77D0000000000443D
-:10AB400045C101000000662017A401006801004013
-:10AB5000439901005C012EF280B0010002006240C6
-:10AB60007ECD01000000005781C0010000002E10C2
-:10AB700048B1010003000040F08D01000000000812
-:10AB8000F0B1010058010005E0C9010000000044D7
-:10AB900061B101000000001062B10100708DA84099
-:10ABA00081320000AF8200881CB000000000000568
-:10ABB00048B10100748D4548613100000050000823
-:10ABC00062DD0100758DA8400530000035001D4094
-:10ABD00047990100010063F384C801007B8DA04305
-:10ABE000856C00000000634085B001003700004024
-:10ABF00047990100010063F382CC01008B00004003
-:10AC00004799010000000045E79101000B95005FA6
-:10AC100081300100EA8A004081B200003700004024
-:10AC2000479901004D9300F394300100258D224A8D
-:10AC300080320000C08B004081B20000370000402D
-:10AC4000479901004D9300F394300100908B224A04
-:10AC500080320000C08B004081B20000360000400E
-:10AC600043990100000000FB12B001000F0000F347
-:10AC700090880100040000F30CF40100BA8B220656
-:10AC8000906C00005C003D4313E00100A8002DF033
-:10AC900094B0010037002FF024B0010036002A5094
-:10ACA000E7D101000000634113C00100958DA0436E
-:10ACB000136C000000000040E7B10100AF910010EC
-:10ACC00086300100AF8200881CB00000978D4205DD
-:10ACD000483100000000004493930100BA8B1A5DD4
-:10ACE0006993000036002D1086B001005C003D43E2
-:10ACF000E7E10100A8002DF094B0010035002FF02D
-:10AD000024B0010001006BFB84C80100A28DA043A8
-:10AD1000856C000035002040E7B1010000000040D4
-:10AD200081B20100010063F312C80100A58DA043A8
-:10AD3000136C000000000040E7B1010040800003F8
-:10AD400044C90100B191004AF0310100AF8200888E
-:10AD50001CB00000A88D42054831000000000044EE
-:10AD60009393010000001A5D6993010037000040D1
-:10AD700047990100110063F382CC0100A18C2241AC
-:10AD80009E060000350000404399010058003D43F5
-:10AD9000E7E10100000000F836B00100AB8C00F0E4
-:10ADA00000B000005E012D0548B10100B38D65F2D1
-:10ADB0001230000000993F4213F00100B88D224785
-:10ADC000E77D0000F58275881CB00000B28D004060
-:10ADD00081B2000000000047E791010000007542C9
-:10ADE000199001007500004061990100BA8DA8B169
-:10ADF0000C3000003694001094300100AF820088BF
-:10AE00001CB000005E012E0548B10100C0A83D46FF
-:10AE10000DE001000000004097B00100C48D224009
-:10AE2000E16D00000400024197400000C18D005018
-:10AE300043C10000D08D224B803200000000624BE5
-:10AE4000129401000900000796E40100000000A729
-:10AE500097C001003000001094C801000080004A33
-:10AE60004499010000000042F1B101005E01004B75
-:10AE7000F0C901005E010005E0C9010000000044C6
-:10AE800061B101002000004A62DD0100CE8DA840C2
-:10AE9000813200000080001044C901000000005011
-:10AEA000F1B101000400000996E40100000068A867
-:10AEB00097C00100D4000005E0C901000000004473
-:10AEC00061B101000000001062B10100D68DA84000
-:10AED00081320000AF8200881CB0000000993F4220
-:10AEE00013F00100DA8D6540813200003F0000F36D
-:10AEF0009688010000000040E7B101000000755590
-:10AF000061B101000000000662B10100DE8DA840C1
-:10AF100081320000E38D224B803200000000004BA4
-:10AF200062B10100E18DA84081320000000000976D
-:10AF300013B001000000009697B00100E98D2009D0
-:10AF4000966C0000E98D1F0996240000F5820088A8
-:10AF50001CB00000E48D004081B200009A940057BC
-:10AF600081300100D58A000548B100002E00004064
-:10AF700043990100EF8D22F3803200009A94004241
-:10AF8000813001001A87004081B200000B95005209
-:10AF900081300100D58A0042198000009A94003A5D
-:10AFA000813001000B95005281300100D58A0040AC
-:10AFB00081B200000000004005B00100AD930040E8
-:10AFC00095300100D58A2240956C0000FA8DA24090
-:10AFD0001F7C0000B0920040813201001A870040BF
-:10AFE00081B200000480000342C90100000000F2A9
-:10AFF00002B0010058930052953001005F93004B5E
-:10B0000002B000001A87004081B200009495004011
-:10B0100095300100068EA20880320000068EA2162E
-:10B02000803200001A872242197C00000000004B89
-:10B03000199001009A94003A813001001A8700406B
-:10B0400081B20000002300A616B00100098E831E05
-:10B05000803200000008000B16DC01000000000038
-:10B060002AC00100E3940008803001000D8E005ECC
-:10B07000179000000495004361310100BD9100402C
-:10B080008D300100EB9400071614010000800010C1
-:10B0900042C90100158E2240E36D0000000000430C
-:10B0A00061B101004000001062DD0100128EA84075
-:10B0B00081320000AF8200881CB000008C94005EDA
-:10B0C00005100100B092004081320100198E220962
-:10B0D000803000000B95004013300100DA8A000533
-:10B0E00048B10000DD93004081320100D58A004064
-:10B0F00081B200000000004A1F900100208E224310
-:10B100003D7C000000000044199001000000004355
-:10B110003D800100218E00421990000014002D4551
-:10B120001F9001007D8E831E803200007D8E0044C2
-:10B1300019900000A292004081320100358EA208D1
-:10B1400080320000358EA21680320000318EA2427D
-:10B15000197C00000082000204DC0100A09800407D
-:10B160004799010030050041893001002E8EA2412F
-:10B17000197C0000B0920040813201001A87004023
-:10B1800081B2000058930015943001005F93004B8A
-:10B1900002B000001A87004081B20000DD93004039
-:10B1A000813201000000004B199001009A94003A8E
-:10B1B000813001001A87004081B20000388E22429F
-:10B1C000197C0000DD93004081320100398E00407F
-:10B1D00081B20000AD93004081320100658E2241B2
-:10B1E000197C0000C000001598C80100658EA00BF6
-:10B1F000996C00003000001080C801000080004001
-:10B200004499010000000050F1B10100000000036A
-:10B21000F0B101000000004261B1010000000040F7
-:10B2200062B10100418EA800E0310000AF820088C9
-:10B230001CB000000000000548B10100C00000156E
-:10B2400098C8010030002E0B99D0010000006A5010
-:10B2500099C00100C000620180CC01000C80000395
-:10B2600042C901002D002DF022B001000000004C69
-:10B2700080C001000000005C23800100D4003F4139
-:10B28000E7E101000B000011E4F501002F00204769
-:10B29000E7B50100528E230B816C00000000004FC7
-:10B2A000E59101000000000880B001000000000BE3
-:10B2B00003B001000000001502D00100E39400007B
-:10B2C0002A4001000000004361B10100400000106D
-:10B2D00062DD0100578EA84081320000AF820088F5
-:10B2E0001CB00000B092000548310100C000000110
-:10B2F00080CE0100638E2611003000001000000097
-:10B300002AC801000000000880B001000000000110
-:10B3100080C00100C00000409998010000000001B9
-:10B3200098D00100E394004C02300100C0000040BE
-:10B33000039801006A8E004081B2000030002F089F
-:10B3400080B00100C0000015F4C90100C000000178
-:10B35000E4CD0100C000004003980100E394000028
-:10B360002A4001006F8E22441F7C0000AC002F4059
-:10B3700013B0010000000001E0C10100B000004076
-:10B3800047990100708E0001E0D10000BD9100409E
-:10B390008D300100806300A616B00100EB94000719
-:10B3A000161401000080001042C90100788E22406E
-:10B3B000E36D00000000004361B101004000001097
-:10B3C00062DD0100758EA84081320000AF820088E6
-:10B3D0001CB000008C94005E051001007B8E2209D9
-:10B3E000803000000B95004081320100D58A0005B5
-:10B3F00048B100007D8E004A1F9000000000000050
-:10B4000010B0010024002D1510C0010028002DF0FF
-:10B4100016B0010022002DF026B0010014002FF21A
-:10B420000CB0010000000001E0D10100000000109C
-:10B4300032B001000000000B1BB0010004001F151A
-:10B440001A5000000000004023B00100000000017D
-:10B450002AB001004B94004035B000002F0020407E
-:10B46000E7B10100C18EA2451F7C00002400200B23
-:10B47000E0B1010028002013E0B101002200200605
-:10B48000E4B10100978E225C1F7C00000000005C8C
-:10B490001F8001003080001042C90100978E2240B9
-:10B4A000E36D00000000004761B1010040000010A2
-:10B4B00062DD0100938EA84081320000AF820088D7
-:10B4C0001CB000000000000548B101000080001918
-:10B4D00042C90100BA8E2240E36D0000A88E2242CC
-:10B4E000197C000005940040813201005792004011
-:10B4F00081320100B58E224B8032000000000043F3
-:10B5000061B101004000001062DD01009E8EA84084
-:10B5100081320000AF8200881CB00000A48E22415E
-:10B52000197C0000C692004011300100A58E000574
-:10B5300048B10000B092004081320100A78E22097C
-:10B54000803000000B95004081320100F9820040FC
-:10B5500005B0000005940040813201005392004084
-:10B56000813201000000004361B101004000001081
-:10B5700062DD0100AB8EA84081320000AF820088FE
-:10B580001CB00000B18E2241197C0000C692004020
-:10B5900011300100B28E000548B10000B0920040A9
-:10B5A00081320100B48E2209803000000B950040EA
-:10B5B00081320100F982004005B000000000004324
-:10B5C00061B101004000001062DD0100B68EA840AC
-:10B5D00081320000AF8200881CB00000000000052E
-:10B5E00048B10100BD8E2241197C0000C692004086
-:10B5F00011300100BE8E000548B10000B09200403D
-:10B6000081320100C08E2209803000000B9500407D
-:10B6100013300100DA8A004005B0000000800019F4
-:10B6200042C90100C88E2240E36D000000000043C3
-:10B6300061B101004000001062DD0100C48EA8402D
-:10B6400081320000AF8200881CB0000000000005BD
-:10B6500048B101000000004005B00100CC8E22413D
-:10B66000197C0000C692004011300100CD8E00050B
-:10B6700048B10000B09200408132010008002D0A5C
-:10B6800084B00100000000F082B0010014002040EE
-:10B69000E1B10100D28E031E80320000D38E004142
-:10B6A00087B000002100004087980100CE93004041
-:10B6B000813201000000005C1F900100D78E22093A
-:10B6C000803000000B95004013300100DA8E2244D8
-:10B6D000197C00000B95004F8130010000000044F0
-:10B6E00019800100D58AA24A1F7C0000DA8A004036
-:10B6F00081B20000BA002040E5B10100E08E9C1745
-:10B7000080320000CC000040439901009D9500402C
-:10B71000813201004495004013300100C000004018
-:10B7200043990100C4002DF082B00100789500F02B
-:10B7300084300100B092004081320100DA8A22098F
-:10B74000803000000B95004013300100DA8A004081
-:10B7500081B200002E00004043990100EC8E22408F
-:10B76000E76D00003200004043990100F48EA240D2
-:10B77000E56D00009A930040813201002400200B07
-:10B78000E0B1010028002013E0B1010022002006F2
-:10B79000E4B101001400200AE0B10100DA8A2209B4
-:10B7A000803000000B95004013300100DA8A004021
-:10B7B00081B200009A93004081320100539300400F
-:10B7C00081320100028F2241197C00000000000B31
-:10B7D00099B0010004001F1598500000028F20014D
-:10B7E000986C00007000000348C9010000002E465C
-:10B7F0001F90010000000050F1B1010000000003A3
-:10B80000F0B101000000004261B10100A00000A4FD
-:10B8100062DD0100FF8EA800E0310000000000059D
-:10B8200048B10100AC002F0010B001000000000181
-:10B83000E0C1010014002F1510C001000000000A33
-:10B8400080B001000000600180D0010000000047CE
-:10B8500019900100848E2209803200000B950009A6
-:10B8600080300100848E004013B00000008000038F
-:10B8700042C90100000000F082B001001300004046
-:10B88000879801000000004C43C10100CE9300F0F6
-:10B8900084300100D58A005C1F9000002C002040FD
-:10B8A000E7B101002D002040E7B10100D58A004238
-:10B8B00019800000C093004081320100E0940048EC
-:10B8C000953001000000004561B10100400000100A
-:10B8D00062DD0100178FA84013300000AF8200889E
-:10B8E0001CB000001D8F000548B100001C8F0040F7
-:10B8F00013B000000000000012B00100080000407A
-:10B900004399010014002DF082B00100040022F0E0
-:10B91000843000001300004087980100CE9300405F
-:10B92000813201000000005C1F900100358F00098A
-:10B9300000B00000D58A8742191000008B002F4705
-:10B9400019800100D58A0040E79100002F000040D7
-:10B9500047990100338F2247E77D00003492004071
-:10B96000E7310100338F2200803200002E8FA24089
-:10B970001F7C0000B092004081320100338F0040F4
-:10B9800081B20000300000404399010032002DF2E6
-:10B9900094B00100589300F2023001005F93004B15
-:10B9A00002B000000000000548B10100348F0040E3
-:10B9B00001B000000000004005B001003A8F2200F5
-:10B9C00080320000398FA242197C0000AD93004004
-:10B9D000813201003A8F004081B20000DD930040C7
-:10B9E00081320100C68F225C1F7C00000000005CD9
-:10B9F0001F8001000080001042C90100428F2240D8
-:10BA0000E36D00000000004561B10100400000103E
-:10BA100062DD01003F8FA84081320000AF820088C4
-:10BA20001CB00000C68F000548B10000A292004083
-:10BA300081320100498FA20880320000498FA2168E
-:10BA4000803200009A94004D813001000082000293
-:10BA500004DC01001A87004081B20000740000403D
-:10BA600043990100000000F882B00100000000F0DE
-:10BA700084B001000000004196B00100578F2242BF
-:10BA8000961400000080001044C901006400684062
-:10BA90009798010000000041F0B101000000004251
-:10BAA000F0B1010070000005E0C901000000004590
-:10BAB00061B101002000001062DD0100548FA84038
-:10BAC000813200000000005C1F9001000000004572
-:10BAD00061B101004000001062DD0100588FA85CD8
-:10BAE0001F000000AF8200881CB000005E012D0521
-:10BAF00048B101005C8F65F21230000000993F42AE
-:10BB000013F00100618F2247E77D0000F582758800
-:10BB10001CB000005B8F004081B2000000000047B5
-:10BB2000E79101000400750996E40100008000100F
-:10BB300044C9010000000044F1B10100000068A800
-:10BB400097C0010000000003E0B101000080000385
-:10BB5000449901000000004461B1010000000010A0
-:10BB600062B10100698FA840E1310000AF82008816
-:10BB70001CB0000000993F4213F001006D8F650575
-:10BB8000483100003F0000F39688010000000040AB
-:10BB9000E7B101000000754081B20100758F224BB2
-:10BBA000803200000000005561B101000000004B30
-:10BBB00062B10100738FA8408132000000000007CD
-:10BBC00016B001000062000B16DC01003492004048
-:10BBD000813201008D8F220080320000E393005FEC
-:10BBE00001100100778F2240956C0000008000104A
-:10BBF00044C9010000000050F1B101000000000341
-:10BC0000F0B101000000004261B10100000000102D
-:10BC100062B101007F8FA800E0310000AF82008890
-:10BC20001CB000000000000548B1010004800003C2
-:10BC300042C90100000000F202B001005893005216
-:10BC400095300100B092004081320100778F22418F
-:10BC5000975000000C80000342C90100000000F072
-:10BC600000B001000000005C018001005F93004B08
-:10BC700002B00000778F000548B10000EB9400404F
-:10BC8000033001001780000344C9010000F0000CDC
-:10BC9000968801000000634C97F0010010800003BB
-:10BCA00044C90100000000ABE1B101008C94005ECA
-:10BCB00005100100030000071AF401000700000747
-:10BCC0001688010000B5000D46C90100978F30406D
-:10BCD000813200000000000BE681010000B7000D7A
-:10BCE00046C901000000000BE68101001000100FA2
-:10BCF00094F401009304005F95040100399300401F
-:10BD000081320100A18F2250FD7F00009F8F4640AD
-:10BD10008132000000001E4131D3010000002E05D9
-:10BD200048B1010000000040E1B101000000004006
-:10BD30000FB001009B920041813001001A87004042
-:10BD400081B20000A292004081320100B38FA208AC
-:10BD500080320000B38FA216803200000082000201
-:10BD600004DC01000000004503F0010000000001B8
-:10BD700000C00100AC8F375C613100000000001B87
-:10BD800062B10100B08F284081320000AD8F0040C9
-:10BD900081B200000000000062B10100B08FA84035
-:10BDA000813200001A87174081B2000074002240DF
-:10BDB000F1B1010000000040E1B10100E094004A4F
-:10BDC00095300100C093005C1F100100498F0040B6
-:10BDD00081B200002F00004047990100C48F224724
-:10BDE000E77D000034920040E7310100C48F22005B
-:10BDF00080320000BF8FA2401F7C0000B092004044
-:10BE000081320100C48F004081B200003000004048
-:10BE10004399010032002DF294B00100589300F2D2
-:10BE2000023001005F93004B02B0000000000005EB
-:10BE300048B10100E094004895300100C093005CD7
-:10BE40001F100100C98F8742191000008B002F4777
-:10BE50001980010000000040E79101000B950042AD
-:10BE600081300100D58A004081B20000C0930040BB
-:10BE700081320100D58A005C1F900000BA0020408A
-:10BE8000E5B101004495004081320100C00000404E
-:10BE900043990100C4002DF082B00100789500F0B4
-:10BEA00084300100B0920040813201000B950045C2
-:10BEB00081300100D58A2242197C00009A94003A10
-:10BEC00081300100D58A004081B2000004000040AA
-:10BED00081B20000A292004081320100DE8FA208F0
-:10BEE00080320000DE8FA216803200009A94004754
-:10BEF000803001000082000204DC01001A8700404B
-:10BF000081B200001080000344C9010000E100A6D6
-:10BF100084B0010000000040F1B1010000000040C9
-:10BF2000F1B1010000006007849401008C94005E70
-:10BF300005100100D58A004081B200008A0000404F
-:10BF400047990100B0920041E7410100DA8A0040C0
-:10BF500081B200009A930040813201005393004067
-:10BF600081320100000000012CB00100000000152A
-:10BF700010B001000000000010C0010004001F0A02
-:10BF80002C5000000000001032B001001E95000689
-:10BF900004300100F68FA2481F7C0000F48F844813
-:10BFA0001F100000AC00004047990100F68F000A06
-:10BFB000E0C100000000000A02B00100BD910001D4
-:10BFC0008C3001000000004361B10100400000100E
-:10BFD00062DD0100F78FA84081320000AF82008847
-:10BFE0001CB000000000000548B101000000000284
-:10BFF00010C0010004902202145000000894004573
-:10C000001F000100EE8F225C1F7C00000000004733
-:10C0100061B101004000001062DD01000090A85CE9
-:10C020001F000000AF8200881CB00000EE8F0005EA
-:10C0300048B100000000000B1BB0010008002D40BB
-:10C0400085B00100000000F082B001000000004057
-:10C0500005B00100CE93004187300100000000458B
-:10C0600061B101004000001062DD01000A90A840AB
-:10C0700081320000AF8200881CB000000000000583
-:10C0800048B1010010902209803000000B9500405B
-:10C090001330010014902244197C00000B95004FCE
-:10C0A000813001001490A2471F7C00000000004472
-:10C0B00019800100FF070008008C01002290224A2D
-:10C0C0001F7C00001A90A21602300000B0920040BF
-:10C0D000813201002F002040E7B10100D58A0040E5
-:10C0E00081B200002D002D082AB001001E902242CE
-:10C0F000197C0000DD930040813201001F90004058
-:10C1000081B20000AD9300408132010030002E006A
-:10C110002AD0010032002A15E4B10100D58A0016A8
-:10C12000E4B1000035902216023000000000000843
-:10C130002AB0010094950040953001002790A2405C
-:10C14000116C0000369022402D6C0000AC000040C5
-:10C1500047990100B0002B01E0C10100002B00A6AF
-:10C1600016B0010000000001E0D10100E3940008D6
-:10C17000803001002E90005E17900000049500436F
-:10C18000613101000000004361B101004000001076
-:10C1900062DD01002F90A84081320000AF8200884C
-:10C1A0001CB000000000000548B10100EB9400073E
-:10C1B000161401008C94005E05100100B09200403E
-:10C1C000813201002F002040E7B10100DA8A0040EF
-:10C1D00081B200000000000B1BB0010004001F151D
-:10C1E0001A500000439020161A6C000070000003E3
-:10C1F00048C9010000002250F1B101000000000315
-:10C20000F0B1010000000000E0B1010000000042B8
-:10C2100061B10100A00000A462DD01004090A846C9
-:10C220001F1000000000000548B1010000000000E0
-:10C2300010B001000000001510C001000000000A4D
-:10C240002AB001000000000A2CD00100AC002F40F1
-:10C2500023B001004A9084451F1000004B90000A53
-:10C26000E0C100000000000A02B001004B94004051
-:10C2700035B000000080001942C9010053902240EF
-:10C28000E36D00000000004361B1010040000010B8
-:10C2900062DD01004F90A84081320000AF8200882B
-:10C2A0001CB000000000000548B101006390A2022C
-:10C2B0001A500000649022402D6C00000080001095
-:10C2C00044C9010000000050F1B10100000000036A
-:10C2D000F0B10100FF070008E08D010000000042FE
-:10C2E00061B101000000001062B101005A90A84045
-:10C2F00081320000AF8200881CB000000000000501
-:10C3000048B101002F002047E7B501000C80000371
-:10C3100042C90100100000F010C80100F007004001
-:10C320001B9801006490005C118000000000000276
-:10C3300010C00100C69200401F000100000000056F
-:10C3400048B101006890230D2C6C000000000040F3
-:10C350001F900100719022461F7C000000000046E3
-:10C360001F8001007080000342C9010071902240CB
-:10C37000E36D00000000004261B1010040000010C8
-:10C3800062DD01006D90A84081320000AF8200881C
-:10C390001CB000000000000548B1010008002D405D
-:10C3A00085B00100000000F082B0010000000040F4
-:10C3B00005B00100CE930041873001000000004528
-:10C3C00061B101004000001062DD01007690A840DC
-:10C3D00081320000AF8200881CB000000000000520
-:10C3E00048B101007C902209803000000B9500408C
-:10C3F0001330010080902244197C00000B95004FFF
-:10C40000813001008090A2471F7C000000000044A2
-:10C4100019800100FF070008008C01009590224A56
-:10C420001F7C00008690A21602300000B0920040EF
-:10C43000813201002F002040E7B10100D58A004081
-:10C4400081B200002D002D082AB0010091902242F7
-:10C45000197C00008A90A2F384300000000000A53F
-:10C4600085B001000000004185D00100D4003E41AC
-:10C4700085E001008E9022401F7C00000000005AE1
-:10C48000119001000B000008E4F50100DD9300406D
-:10C49000813201009290004081B20000AD930040D3
-:10C4A0008132010030002E002AD0010032002A150E
-:10C4B000E4B10100D58A0016E4B100009890A216FC
-:10C4C00002300000B092004081320100E79000404D
-:10C4D00081B200002D002D082AB00100A69022474D
-:10C4E0001F7C0000A2902242197C00009D90A2F3C4
-:10C4F00084300000000000A585B00100000000416C
-:10C5000085D00100D4003E4185E00100A190224089
-:10C510001F7C00000000005A119001000B00000871
-:10C52000E4F5010058012D002AD0010060012DF032
-:10C5300010B00100000000F02CB00100358E00406A
-:10C5400081B200009495004195300100AE90A208A0
-:10C5500080320000AE90A216803200000000004140
-:10C5600097B00100AC90230D026C00000000004168
-:10C5700097C001005F93004B02B00000E7900005F8
-:10C5800048B10000AC002F0114B00100B0002B0135
-:10C59000E0C10100002B00A616B001000000000160
-:10C5A000E0D10100BE90230D026C0000008000105D
-:10C5B00044C9010000000050F1B101000000000377
-:10C5C000F0B101000000004261B101000000001064
-:10C5D00062B10100B790A800E0310000AF8200888E
-:10C5E0001CB000000000000548B101000C800003F1
-:10C5F00042C90100100000F022C801000000005CE8
-:10C60000238001000000000184B00100C190230DCF
-:10C61000026C00000000000D02B0010000000008E4
-:10C6200080B00100C69022401B6C0000E394000122
-:10C6300084500100CE902240856C00000000000173
-:10C6400080C001001080001046C901000000004FAA
-:10C650004381010000000042F0B1010020000040D1
-:10C66000F0C9010000000016F0B101000000004315
-:10C6700061B10100A00000A162DD0100CC90A81111
-:10C68000E0310000DD90005E17900000D190230D96
-:10C69000026C00000000000D02B00100000000016B
-:10C6A00084D00100D69022401B6C0000049500430A
-:10C6B00061310100DD902240856C00000000000126
-:10C6C00012C001001080001046C901000000004F98
-:10C6D0004381010000000042F0B1010000000009A8
-:10C6E000F0B1010000000018F0B10100A00000A1AD
-:10C6F00062DD0100DB90A811E03100000000004382
-:10C7000061B101004000001062DD0100DE90A80A66
-:10C7100002300000AF8200881CB00000B09200051B
-:10C7200048310100E590230D026C0000FF07001165
-:10C73000008C0100B092004081320100EB940007B0
-:10C74000161401008C94005E051001002F0020409B
-:10C75000E7B10100DA8A004081B2000000800003E6
-:10C7600042C90100000000F882B00100000000F89A
-:10C770008CB00100000000F08EB0010097930040E3
-:10C78000133001000000004085B00100CE9300414D
-:10C790008730010053930040813201000080001077
-:10C7A00042C90100F8902240E36D000000000045FE
-:10C7B00061B101004000001062DD0100F490A8406A
-:10C7C00081320000AF8200881CB00000000000052C
-:10C7D00048B10100FA902209803000000B9500401A
-:10C7E000133001000000000B1BB001000000001519
-:10C7F0001AD001000191A241197C000094950040DB
-:10C80000953001000000001680B201000A9127084F
-:10C8100080320000279000002AC00000949500415B
-:10C82000953001000000001680B201000591270834
-:10C8300080320000AE9000002AC0000000000041DD
-:10C8400097B001000891230D026C00000000004128
-:10C8500097C001005F93004B02B00000000000058C
-:10C8600048B10100D58A2242197C00009A94003A0E
-:10C8700081300100D58A004081B200000E91004A4B
-:10C880001F900000D8920000103001000000001539
-:10C8900010C001000000001032B001001E9500061B
-:10C8A000043001001791A2441F7C00000000000B1F
-:10C8B0001BB001000000000A2CD001000000000A9B
-:10C8C00002B00100BD9100018C3001000080001910
-:10C8D00042C901001E912240E36D000000000043A8
-:10C8E00061B101004000001062DD01001A91A84012
-:10C8F00081320000AF8200881CB0000000000005FB
-:10C9000048B101000000000210C00100279122027E
-:10C9100014500000089400451F0001001091225C93
-:10C920001F7C00000000004761B1010040000010C2
-:10C9300062DD01002391A85C1F000000AF82008827
-:10C940001CB000001091000548B1000008002D4007
-:10C9500085B00100000000F082B00100000000403E
-:10C9600005B00100CE930041873001000000004572
-:10C9700061B101004000001062DD01002C91A8406F
-:10C9800081320000AF8200881CB00000000000056A
-:10C9900048B1010032912209803000000B9500401F
-:10C9A0001330010035912244197C00000B95004F93
-:10C9B000813001000000004419800100FF070008D9
-:10C9C000008C01004391224A1F7C00003B91A2167B
-:10C9D00002300000B0920040813201002F00204060
-:10C9E000E7B10100D58A004081B200002D002D087A
-:10C9F0002AB001003F912242197C0000DD930040E3
-:10CA0000813201004091004081B20000AD930040AE
-:10CA10008132010030002E002AD0010032002A1598
-:10CA2000E4B10100D58A0016E4B100002390A216FB
-:10CA300002300000B0920040813201002F002040FF
-:10CA4000E7B10100DA8A004081B20000D892004AC2
-:10CA50001F1001003890001032B000008A00204002
-:10CA6000E7B101004D91A241197C0000B092004055
-:10CA7000813201005091004081B2000058930015AE
-:10CA8000943001005F93004B02B0000000000005ED
-:10CA900048B1010052912242197C00009A94003A58
-:10CAA000813001000B95004581300100D58A00409E
-:10CAB00081B20000F48E00451F9000009A93004060
-:10CAC000813201005393004081320100389000010F
-:10CAD0002CB00000A2920040813201006591A208B2
-:10CAE000803200006591A2168032000000820002B0
-:10CAF00004DC01000000004503F00100000000011B
-:10CB000000C001005E91375C613100000000001B35
-:10CB100062B1010062912840813200005F910040C3
-:10CB200081B200000000000062B101006291A840E3
-:10CB3000813200001A87174081B200005801200896
-:10CB4000E0B1010060012016E0B101009A930047B6
-:10CB50001F10010053930040813201003890000102
-:10CB60002CB00000A29200471F1001007891A2088B
-:10CB7000803200007891A216803200007491A242A7
-:10CB8000197C00000082000204DC0100A098004033
-:10CB90004799010030050041893001005893001584
-:10CBA000943001005F93004B02B000001A870040F0
-:10CBB00081B20000DD930040813201000000004B93
-:10CBC000199001009A94003A813001001A870040C0
-:10CBD00081B2000058012008E0B101006001201678
-:10CBE000E0B10100D89200103230010038900040CE
-:10CBF00013B00000A2920040813201008991A20886
-:10CC0000803200008991A21680320000008200026A
-:10CC100004DC01000000004503F0010000000001F9
-:10CC200000C001008291375C613100000000001BF0
-:10CC300062B101008691284081320000839100405A
-:10CC400081B200000000000062B101008691A8409E
-:10CC5000813200001A87174081B200000080000373
-:10CC600042C90100000000F882B00100000000F895
-:10CC70008CB00100000000F08EB0010097930040DE
-:10CC8000133001000000004085B00100CE93004148
-:10CC90008730010053930040813201000080001072
-:10CCA00042C9010098912240E36D00000000004558
-:10CCB00061B101004000001062DD01009491A840C4
-:10CCC00081320000AF8200881CB000000000000527
-:10CCD00048B10100358E2209803000000B950040DC
-:10CCE00013300100358E004081B2000014002D4544
-:10CCF0001F9001007D8E004419900000A091A24178
-:10CD0000197C00000000004A1F900100E88F0040DD
-:10CD100081B200009A93004A1F1001005393004013
-:10CD200081320100389000012CB00000D892004000
-:10CD3000813201003890001032B00000F48E0045BE
-:10CD40001F9000000000004137C3010000000041B7
-:10CD500033C301003600000102CC01000000D240C4
-:10CD600081B20000AC9185178032000000009F481E
-:10CD700003D00000AE919C178032000000009F4C51
-:10CD800003D000000000800134C301004080000394
-:10CD900044C901000000004AF0B101000000004059
-:10CDA000F1B1010000000012F0B10100B4920041A5
-:10CDB000E13101000080004344C90100100000403F
-:10CDC000F199010000000048F0B1010000000049A5
-:10CDD000F0B1010040000003E0C90100000000457F
-:10CDE00061B101000000004362B101000000A840F1
-:10CDF00081B20000BA91004081B20000BA00204028
-:10CE0000E5B10100B0002F018CD001000000004608
-:10CE1000E0C10100AC002F4013B00100CC002D0197
-:10CE2000E0C10100C4919C17803200009D95004034
-:10CE300081320100C6912247197C00000000005F8A
-:10CE4000139001004495004719100100C0002D44C3
-:10CE50001F900100C4002DF082B00100789500F011
-:10CE600084B0000090002D0548B10100DB91A24B79
-:10CE70001F7C00002E92A24C1F7C0000DB911F1C27
-:10CE8000E06D0000DE91A20180320000A8002D4676
-:10CE90008FB00100D4911F1CE06D0000B400004071
-:10CEA00043990100D69122F03A6C00002B921FF0BA
-:10CEB0003A6C00000000A24080B200000000804FE9
-:10CEC0008FB001008A000040439901002C9220425B
-:10CED000E76D0000DA9122408032000000008059A6
-:10CEE0008FB00100000080588FB00100DD9122401A
-:10CEF000803200000000805C8FB001000000805B89
-:10CF00008FB00100AC00004043990100B0002DF04B
-:10CF100084B00100E291A242246C0000EB9123F066
-:10CF2000026C0000E891A2F0803200002D92A24233
-:10CF3000246C00002D92A241036C0000E791A240F6
-:10CF400080320000000080518FB00100000080524C
-:10CF50008FB001002D921F12845000002D92A0016D
-:10CF6000846C0000DB91004081B200008B00004027
-:10CF7000439901001692A246E77D0000140000408C
-:10CF800043990100089222F014300000F491200A25
-:10CF9000026C00000592031E80320000F391A24053
-:10CFA00080320000000080448FB001000000804902
-:10CFB0008FB00100F991220A026C0000FC91A2419D
-:10CFC000197C0000F891A2408032000000008055DA
-:10CFD0008FB00100000080568FB00100FB91A2408D
-:10CFE00080320000000080438FB0010000008048C4
-:10CFF0008FB001000000000182B001000000000AB3
-:10D0000082D0010002922091836C00000192A24024
-:10D0100080320000260080408F9801002700804069
-:10D020008F9801000492A240803200001F008040CF
-:10D030008F980100200080408F9801000792A24045
-:10D0400080320000220080408F9801002300804041
-:10D050008F98010088002D448FB001001192A241E9
-:10D06000197C00000E92A2433D7C00000E92A2F2B9
-:10D07000026C00000000A24080B200000000804965
-:10D080008FB001001092A240803200000000804367
-:10D090008FB00100000080488FB001000E92A09177
-:10D0A000036C00000C9222433D7C00001592A240CC
-:10D0B00080320000280080408F98010029008040C5
-:10D0C0008F98010014000040439901001F92A2F0C4
-:10D0D0001430000088002D448FB001001C92A2F291
-:10D0E000026C00000000A24080B2000000008049F5
-:10D0F0008FB001000E922241197C00000C92209109
-:10D10000036C00000E92004081B200002392200ABE
-:10D11000026C00002292A240803200000000804495
-:10D120008FB00100000080498FB001002892220AD0
-:10D13000026C0000FC91A241197C00002792A240E1
-:10D1400080320000000080558FB001000000805642
-:10D150008FB001002A92A24080320000000080437C
-:10D160008FB00100000080488FB001003092004372
-:10D1700095B000003092004195B00000309200421E
-:10D1800095B000003092004495B000003092004C01
-:10D1900095B00000E0940040813201003392A2403B
-:10D1A000803200000000804B8FB001000000804CF6
-:10D1B0008FB001002D000040439901002E002FF395
-:10D1C00084B001003892A2F3963000000000804045
-:10D1D00001B001002D002A41E7D10100D4003D41FA
-:10D1E00085E001000B0000F200E401003E92225AAB
-:10D1F000017C0000000000401F9001003F92005A97
-:10D2000001800000000000401F8001000000634119
-:10D2100085C001000000A0A5856C01000000E3406E
-:10D2200085B001000C80000342C9010012000040DB
-:10D2300087980100DF9500F08CB000004C922240EE
-:10D240000F6C000000002F0548B101004992A24B6D
-:10D25000197C00004A9222F0186C00000000604B1C
-:10D26000199001001693000710300100F982004068
-:10D2700005B000004E92225A1F7C00009B92004095
-:10D2800081300100F982004005B0000000002F0548
-:10D2900048B101000000604B19900100169300078F
-:10D2A00010300100F982004005B0000000002F0599
-:10D2B00048B101000000604B19900100169300076F
-:10D2C000103001000000804005B00100579233404B
-:10D2D000813200005A92A1AD95200000689213405F
-:10D2E00081B200000000134A5A8301003000394522
-:10D2F00095E001001F00000F5ED801000000005AF9
-:10D300005F9001000000004045B0010000000004F3
-:10D3100048B00100000000054AB001000000000C08
-:10D3200058B00100000000074EB00100A884004082
-:10D330005D9801000000005861B101000000004A42
-:10D3400062B101000000A84197B000006592004062
-:10D3500081B200000000804097B001006992600730
-:10D3600096300000FFFF004B84890100000070C26E
-:10D3700024B001007392A245257C00006D923120FB
-:10D380008530000074922212487F00005804111268
-:10D39000480301001000001296E401000000004B59
-:10D3A0001E9401000000805A1F90010073923140CA
-:10D3B00081320000000000B424B0010074922212F7
-:10D3C000487F0000580400408132010000002F0512
-:10D3D00048B1010081920BF084300000000011126E
-:10D3E000488301007E922250857000005E0100405B
-:10D3F00043990100419400F2963001009304001219
-:10D40000943001000000005A1F900100100000122B
-:10D4100096E401000000804B1E94010010000042C1
-:10D4200010F4010000B73F4311F0010007000008AD
-:10D430008A880100849230A10C3000008792224536
-:10D44000E67D00007492104081B2000000002A4581
-:10D45000E691010000001012488301000000114015
-:10D4600081B201000000604B858001005E01004038
-:10D4700043990100419400F29630010000800010B1
-:10D4800044C90100D8000040819801002E002D05FC
-:10D4900048B1010092922240E76D000080000040F8
-:10D4A00080C8010000000040F0B101000900000840
-:10D4B00086E40100000068A787C001000000004466
-:10D4C00061B101000000001062B101009692A80550
-:10D4D000E03100001000001296E401000014004B3F
-:10D4E00096DC01000000804B1E9401001000000F2C
-:10D4F00084F401001F000042848801009F922240B2
-:10D5000080320000A092004268B10000000000429A
-:10D510006AB10100A092315A1F0000000000914240
-:10D5200048930100A2923540813200006D00004016
-:10D5300061990100A89228B12C300000A392224DDD
-:10D54000757D0000000000402DB0010000009540F6
-:10D5500011B001006D00004061990100A892A8B1CE
-:10D56000103000000000954081B201007F000040B3
-:10D5700061990100AF9228B110300000AB929FBAC0
-:10D58000803200000000804011B0010000008024C3
-:10D59000118401000000005F61B101000010000073
-:10D5A00062DD01000000A84081B20000B19200409D
-:10D5B00081B20000AC94004047990100B59232401E
-:10D5C00081320000BB9222F896300000000000F883
-:10D5D00090B00100000000F092B001000100004B8B
-:10D5E000F0CD010020009248E0C901006C0000402D
-:10D5F00061990100BF9228B192300000BB92224C89
-:10D60000757D00000400124091B000006C000040E5
-:10D6100061990100BF92A8B190300000FF0000485E
-:10D62000968801000000004B90D001000100004BE3
-:10D63000F0CD010020000048F0C90100000092492F
-:10D64000E0B101000C002D1048B10100FF070008F7
-:10D65000828C0100FF0700F0008C01000000A24155
-:10D6600000EC0000CC92221A006C0000B092000086
-:10D67000343001000000005049C10100C892A241AD
-:10D68000235000000000804081B201000C002D10EA
-:10D6900048B10100FF070015828C0100FF0700F070
-:10D6A000008C01000000A24100EC0000D592220D88
-:10D6B000006C0000B09200001A3001000000005021
-:10D6C00049C10100D192A2412350000000008040D6
-:10D6D00081B20100DA92831E803200000000004413
-:10D6E0001990010024002D012CB0010028002DF01C
-:10D6F00016B0010022002DF026B0010014002FF218
-:10D700000CB0010000008040E1B101003000004099
-:10D710009798010060972E4081B201000000004000
-:10D72000F1B10100E192A2419750000064973E439D
-:10D730009DE0010000008040E1B1010064973E439C
-:10D740009DE001000000800BE8B1010064973F43B9
-:10D750009DE00100000000F016C0010000008040C4
-:10D76000E1B1010064973F439DE00100000000F437
-:10D7700016B0010000008040E1B1010060173D4398
-:10D780009DE00100100080A116E4010000B5000D2D
-:10D7900042C90100F092304717040000F392A20B37
-:10D7A000E67D00000000904281B0010000B7000D4E
-:10D7B00046C90100F792A20BE67D00000000000BB5
-:10D7C000E69101000000904181B00100000010408E
-:10D7D00081B20100F8924007963000009D0400409D
-:10D7E000813201000293A245957C000001973F41E0
-:10D7F00095E00100000000F396B001000000004E2B
-:10D80000E6B1010040973E4097E001000000004E65
-:10D81000E6B1010040973E409DE001001593003BBA
-:10D82000E7B1000002933040813200000C93A20B5C
-:10D83000E67D000000B5000D46C901000893A20B6B
-:10D84000E67D00000000104081B201000000984217
-:10D8500081B0010000B7000D46C901000000000BB7
-:10D86000E69101000000104081B2010000009841E3
-:10D8700081B00100040021A2952000000000104AA0
-:10D880004483010000973E4195E001000000004EF6
-:10D89000F6B101000000004EE6B1010040973E40A5
-:10D8A0009DE001000000003BE7B101000000004ADC
-:10D8B00090B10100FFFF000792890100000098402D
-:10D8C00081B001000300000886F4010000B70043A6
-:10D8D00046C901000700000882880100199340082A
-:10D8E000963000009D0400408132010025932245BE
-:10D8F000957C00002193225A1F7C00001000000F2D
-:10D9000096F401001E93315F970400000000114B54
-:10D91000489301000000004B6AB1010021933040A0
-:10D920008132000000000041E6810100000010404B
-:10D9300081B201000000984081B2010000973F4190
-:10D9400095E00100000000F396B0010040973D40D3
-:10D9500097E00100000063F388B001002D93A23B23
-:10D96000896C00000000004A90B10100010000A68F
-:10D9700092B101002E93184A449300000000184011
-:10D9800081B201003000394597E001003393225AFB
-:10D990001F7C00001F04000F98D801000000004CFD
-:10D9A0005E940100359300054AB000001F0400A7F3
-:10D9B0005E840100000000404BB0010000000058F0
-:10D9C00061B101000000004B62B101000000A840FD
-:10D9D00081B200003693004081B2000039934007C5
-:10D9E000963000009D040040813201003D932245A5
-:10D9F000957C00000000984081B201009B04004A21
-:10DA00004413010000973F4195E00100000000F33E
-:10DA100096B0010040973D4097E00100000063F39D
-:10DA200088B001003000384597E001000000005F39
-:10DA30000F9001000000005861B101000000004B90
-:10DA400062B101004593A840813200003E93A23BA1
-:10DA5000896C0000300038459DE0010000009840CE
-:10DA600081B2010093040012943001001693005A11
-:10DA70001F0001000000805A1F9001001100004AA1
-:10DA8000E6C9010034002F4F95840100000000F327
-:10DA900096B001000100634B84C801000000A04360
-:10DAA000856C01000000E34085B0010030002D448A
-:10DAB0001F90010032002DF22AB00100040022F272
-:10DAC0000230000034920010323001003200A040D9
-:10DAD000E5B101000000004097B00100F0070040F0
-:10DAE000999801000000004A02C0010000000050A7
-:10DAF00003D001000000004197C001000000A34CCA
-:10DB000002D000005C93004081B20000000000A839
-:10DB100036B001006C9322410350000000800010D9
-:10DB200044C9010000000050F1B101007000000381
-:10DB3000F0C901000000004261B1010000000010C6
-:10DB400062B101006593A800E0310000AF82008857
-:10DB50001CB00000B0920040813201007C800003C4
-:10DB600042C90100000000F000B001006093005CB9
-:10DB700001800000B0920040813201000000001BD3
-:10DB800010B1000068012D0682B00100000000F213
-:10DB900082C001000080000346C90100AB92004032
-:10DBA0008132010093932240116C0000000068084C
-:10DBB00038960100F007004182CC01007193AA4120
-:10DBC0003B400000000000F810B001000000005CC5
-:10DBD000118001000100001D04CC01009293264633
-:10DBE000233000000800000312C80100640120F087
-:10DBF000E0B1010091932241055000002000000394
-:10DC000048C901000C0000F886C801000000224449
-:10DC1000F1B1010000000043F0B101000000000973
-:10DC2000E0B101000000004461B10100A00000A4C7
-:10DC300062DD01008393A8461F10000090932241EB
-:10DC4000055000008E93A24123500000000000A167
-:10DC50001AB001000000004461B101004000001052
-:10DC600062DD01008993A84623300000AF8200885E
-:10DC70001CB000001000000348C901000000000DA6
-:10DC800042B101000000004413C001007E93005027
-:10DC900049C100000000000548B1010004800003F4
-:10DCA0001AC801000000804081B201009293224016
-:10DCB0003B6C0000000000F800B00100B092005C76
-:10DCC00001000100939300413BD0000000008D470C
-:10DCD00080320100B0002F5F13B001000000E0F0BF
-:10DCE0008CC001000080000342C90100000000F860
-:10DCF00094B00100000000F88CB001009F938CF8F4
-:10DD00008E3000000000004419900100040022F849
-:10DD100014300000000000F816B00100000000F808
-:10DD200026B0010008002EF80CB001000C002A4AB1
-:10DD3000E0B1010028000000E0C901001000201B34
-:10DD4000E0B10100AC93200A0C6C0000000000F868
-:10DD500094B00100000000F896B00100200020F00F
-:10DD6000E4B101001800204AE0B101001C00204B82
-:10DD7000E0B101009793004013B000002C002D4249
-:10DD8000199001002E002FF382B00100000000F373
-:10DD900096B00100B293A2A5976C000000008041EC
-:10DDA00095B00100B593A240976C000000000040C0
-:10DDB00083B001002D002040E7B101000000634165
-:10DDC00097C00100D4003E4183E001000000004103
-:10DDD00083C00100BA93A0A5836C0000000000403E
-:10DDE00083B001002C002041E6B10100BF93224026
-:10DDF0001F7C00000004000098DC01000B00004CB8
-:10DE0000E4F50100000080401F8001000B0080004D
-:10DE1000E4F50100B4920040813201000480000367
-:10DE200044C9010000000040F1B1010000000040C1
-:10DE3000F1B101000000604187B0010000800010D6
-:10DE400044C9010000000050F1B101000000004889
-:10DE5000F0B1010000000049F0B101000000000332
-:10DE6000E0B101000000004561B101002000001098
-:10DE700062DD01000000A85D05900000CB9300402A
-:10DE800081B20000B49200408132010000800003A2
-:10DE900044C9010000000041F0B10100000000424F
-:10DEA000F0B1010000000040F1B1010000000043AA
-:10DEB000F0B101000080001044C9010000000050D2
-:10DEC000F1B1010000000048F0B10100000000497C
-:10DED000F0B1010000000003E0B1010000000045C6
-:10DEE00061B101002000001062DD01000000A85DAA
-:10DEF00005900000DA93004081B200002D00004040
-:10DF0000439901002E002FF384B00100010063F358
-:10DF100096C80100E2939F4185500000010000A5D2
-:10DF200085CC01002D00A042E6B101005E012D006C
-:10DF300080B00100E793524381600000020000F2CC
-:10DF400082F40100E8930041809400000000005F2B
-:10DF5000819001000000005E61B1010000000040FE
-:10DF600062B101000000A84095B00000E9939EBB9B
-:10DF700080320000EE93A2401F7C0000B09200406F
-:10DF800081B200000000804195B00100040000153E
-:10DF900042C90100000000542BC00100000000FC39
-:10DFA00024B00100000000FC38B00100000000FEB9
-:10DFB0003CB00100000000FE3AB0010003949C1741
-:10DFC00080320000F893A24A197C00000000804CC7
-:10DFD0001F9001000C00001E98F40100F793A24866
-:10DFE000996C00000000001542B10100F793A28A6D
-:10DFF000F16D00000C00000102CC0100000000FCEB
-:10E000003EB00100010000F428CC0100CC002D0539
-:10E0100048B10100029420F03E6C00000000004B6B
-:10E020001F9001000000004C2BC00100BF002D0517
-:10E0300048B10100000080F33AE0010000002E4BDF
-:10E040001990010007002A0CE4B1010000008004CF
-:10E05000E6B1010018000040439901001C002DF0BA
-:10E0600016B0010020002DF026B001000C002FF2A8
-:10E070000CB001000000A20614EC00000F94224531
-:10E080001F7C00000000A3062AEC0000000000F83E
-:10E0900094B00100000000F096B001000C002D408B
-:10E0A00081B2010000002A4CE1C1010030000010E3
-:10E0B00048C901000A000040F1990100180000055C
-:10E0C000F0C901000000004AF0B101000000004B5F
-:10E0D000E0B101000000004761B10100A00000A410
-:10E0E00062DD01001994A85C1F100000000080058B
-:10E0F00048B1010000002E1048B1010040000001AD
-:10E10000F0CD010040000003F0C901004000000014
-:10E11000E0C9010000002E5049C1010000000006C6
-:10E12000F1B1010000000003F0B10100239462424C
-:10E13000613100002000001062DD01002494A8403D
-:10E14000813200001000001062C901002694A8006E
-:10E15000E03100000000F24081B2010000002E100A
-:10E1600048B1010040000001F0CD01004000000373
-:10E17000F0C9010040000000E0C9010000002E507D
-:10E1800049C1010000000006F1B1010000000003D8
-:10E19000F0B10100309462426131000020000010B3
-:10E1A00062DD01003194A84081320000A00000A48B
-:10E1B00062DD01003394A800E03100000000F2406D
-:10E1C00081B201003080004A44C90100000000060D
-:10E1D000F1B10100C0A83D460DE00100FF7F00A1A4
-:10E1E000F08901000200000996F4010000000046D9
-:10E1F00097E00100000060A897C001003D946342D1
-:10E20000613100003000004A62C901003E94A8401C
-:10E21000813200000000F34081B2010000993F42CA
-:10E2200097F0010042946540813200004A9422F345
-:10E23000740600003F0000F394880100000000070E
-:10E24000E78501000000755561B101000000004A3A
-:10E2500062B101000000A84081B200004794004074
-:10E2600081B200000000F54081B20100000000A86A
-:10E2700036B001005A948241234000004F94A244DA
-:10E280001F7C0000BD9100018C3001002080001037
-:10E2900042C9010055942240E36D00000000004394
-:10E2A00061B101004000001062DD01005294A840FD
-:10E2B00081320000AF8200881CB0000000000041E5
-:10E2C00023B001000000001032B001005A94224136
-:10E2D000197C0000C6920043233001000000004179
-:10E2E00023B001005C94A3150C6C00005D94000643
-:10E2F00004B000000000001504B001005F9420028B
-:10E300001A6C00000000000D04B001001E9500050D
-:10E310004831010089942202145000006394A20243
-:10E320002A5000008994A2451F7C000065942202B7
-:10E330000C5000006E94000216C000006D94225C28
-:10E340001F7C00003080001042C901006D94224003
-:10E35000E36D00000000004761B1010040000010C3
-:10E3600062DD01006994A84081320000AF8200881C
-:10E370001CB000000000000548B101000894005CDA
-:10E380001F00010089942215803200000000005017
-:10E3900033C001008894A2021A5000007A942246E9
-:10E3A0001F7C00007080000342C90100000000468D
-:10E3B0001F8001007A942240E36D000000000042BB
-:10E3C00061B101004000001062DD01007694A840B8
-:10E3D00081320000AF8200881CB000000000000500
-:10E3E00048B101000C80000342C90100100000F098
-:10E3F00010C801002F002F5C1180010000000047B1
-:10E40000E7910100F00700401B9801004C94201593
-:10E410001A6C00007000000348C90100000022507F
-:10E42000F1B1010000000003F0B10100FF07000896
-:10E43000E08D01000000004261B10100A00000A4D5
-:10E4400062DD01008594A8461F1000004C94000571
-:10E4500048B100004C94000210C000008B94A2440C
-:10E460001F7C0000BD9100018C3001000000001BEA
-:10E4700010B100000080001044C901000C000040F1
-:10E48000F199010010000008F0C901000000001619
-:10E49000F0B1010010000003E0C9010000000045D8
-:10E4A00061B101002000001062DD01000000A85CE5
-:10E4B0001F9000009294004081B20000170000D02D
-:10E4C000A2C901000000A24027EC000000000020CB
-:10E4D00000B00100B0920041A341010096940041B8
-:10E4E00027D000001000000796E401000000004B58
-:10E4F000809401000000005461B1010000800040E0
-:10E5000062DD01000000A84081B200009D9400403F
-:10E5100081B20000EF9400402B300100AC002D06CA
-:10E5200016C0010090002DF016C40100A594A0F0C3
-:10E53000164400000000004117C001000E0000A2B8
-:10E5400044C9010000006CF030B00100AC002D4067
-:10E5500087B0010000006CF028B00100AE94224AA0
-:10E56000197C00000030004386C801000030000B19
-:10E5700016C80100AE94A4408132000000000041A2
-:10E5800017C00100CF94220680320000BB94A2067F
-:10E59000146C0000B8942248197C0000B394A04188
-:10E5A000174000000000004117C0010000000041BA
-:10E5B00031C0010090002018E0B101008B002D480F
-:10E5C000198001008B002045E7910100BB940040B9
-:10E5D000879000000800004386980100BB94A04883
-:10E5E000174000000000004117C00100B0000040CB
-:10E5F0004399010010500043FCC9010026950030EA
-:10E600008130010000000040E5B10100C694224ABB
-:10E61000197C0000080000A244C90100CC002DAB09
-:10E62000F9B10100000000AB17C00100C594A0F0D3
-:10E63000164400000000004117C00100CA9464F0B5
-:10E6400082B00000A400004047990100CA94A2F2E1
-:10E650008032000000000041E5B101008C0020186C
-:10E66000E0B1010090000040459901000000600603
-:10E6700030C001000000860C80B20000BC002D46B6
-:10E6800019900100A000A0F2E4B10100B000004028
-:10E690004399010010500043FCC901002695003049
-:10E6A000813001000000A24A19FC0000080000A20D
-:10E6B00044C90100CC002DABF9B10100000000AB52
-:10E6C00017C00100D894A0F01644000000000041DB
-:10E6D00017C001000000E4F082B0010000800010CB
-:10E6E00044C9010000000041F0B101000000000336
-:10E6F000F0B1010000000000F0B1010000000010C6
-:10E7000062B101000000A81BE0B10000DD940040F0
-:10E7100081B2000000F0000C7E8901000000A64CD0
-:10E72000956001000000804A1894010000800010EC
-:10E7300044C9010004002201F03100002000004023
-:10E74000F0C9010000000016F0B101000000004314
-:10E7500061B101002000001062DD01000000A81579
-:10E76000E0B10000E894004081B200001080000396
-:10E7700044C9010000000006F0B1010000000001E2
-:10E78000F0B101000000E85F179001007000004048
-:10E79000439901007A012EFE92B001008B002DF604
-:10E7A00016B00100F5942243E77D0000000000440C
-:10E7B00045C10100040000A62AB0010028006E0631
-:10E7C00082C80100F994224A197C0000000000422E
-:10E7D00045D1010000006E4C83C0010000000041E3
-:10E7E00092C00100FA9443303D0700000000669E8D
-:10E7F00083B0010000001B413DC301000000004147
-:10E8000092C00100060000A244C9010010000049A6
-:10E8100098F4010003952630930400000395904C72
-:10E82000924000000000004193C00100FFFF8049BA
-:10E83000ECA901000080001044C90100040022017D
-:10E84000F031000000000009F0B1010000000018E4
-:10E85000F0B101002000001062DD01000000A815E9
-:10E86000E0B100000895004081B200001595225FDC
-:10E87000817C00001495A240197C0000000000403B
-:10E88000199001000000005461B101001000000760
-:10E8900096E401000000004F979401000000004B37
-:10E8A00062B10100149528408132000011950040AA
-:10E8B00081B200000000A221818400001895A25FAF
-:10E8C000816C00000000A243197C0100000000439D
-:10E8D000199001000000005461B101001000000710
-:10E8E00096E4010000000040969401000000004BF7
-:10E8F00062B101000000A84081B200001B950040F9
-:10E9000081B200000080001944C901000400220205
-:10E91000F03100000000000BF0B101000000001316
-:10E92000F0B101000000004361B1010020000019B6
-:10E9300062DD01000000A808E0B10000239500405E
-:10E9400081B200007C002DF084B00100020000F0D4
-:10E9500098F401002C95204C846C00008800004045
-:10E96000439901002C9520F2846C000000000040C7
-:10E9700085B0010098002D1482B00100000000F065
-:10E9800098B00100A3002D1498D001003195204CBF
-:10E99000846C00000000004C84B00100000000F313
-:10E9A00080E0010034952340846C000000000040AA
-:10E9B00084B00100D0002014E0B10100980025428D
-:10E9C00080B0010000006EF380F001000000A6425C
-:10E9D00082C000003A95A0401640000000000041AF
-:10E9E00017C0010000009FF082EC00009800A041D9
-:10E9F000E0B1010000002E1048B10100A801004064
-:10EA0000F199010000000005F0B1010009000007C4
-:10EA100096E40100000060A797C00100000000100C
-:10EA200062B101000000A84081B2000041950040A1
-:10EA300081B20000A8002D1C8AB0010000009FF0E8
-:10EA40008AD000000000A2408BEC00008A00204029
-:10EA5000E7B10100B400004047990100A4002D4532
-:10EA6000E0D101004E959C1780320000BE002FAB14
-:10EA700083B00100A195001482500100539500401D
-:10EA800081B20000539522F2823000008C000040D9
-:10EA90004399010053959F1CE06D0000BE000040AB
-:10EAA00047990100A195004081320100A800201C77
-:10EAB000E0B101009C002D3081B0010088002DF0F4
-:10EAC00084B0010094002DF286B00100669523F019
-:10EAD000846C00005B952392876C0000C90400A63B
-:10EAE00094B001005D95004081B20000200000A6B6
-:10EAF00094B001006089004A949801005D956840D7
-:10EB0000813200000000004AB0B10100BF002D4278
-:10EB1000B2B1010090002DF380E001006195D44076
-:10EB200081320000000078DA84C001006B95234038
-:10EB3000846C00009400209DE1B101006B950040C1
-:10EB400084B00000BF002D4384C0010090002DF36D
-:10EB500080E001006B952340846C00009400209DB0
-:10EB6000E1B101000000004084B001006F95A2F007
-:10EB7000386C00009C002042E0B101000000005F02
-:10EB80001394010000008046198001009C0020427F
-:10EB9000E0B101003700004043990100040000F398
-:10EBA00080F401000F0000F3828801007595234175
-:10EBB000806C00000000005F139401000000890CCD
-:10EBC00080B20000BC00004043990100A000A0F208
-:10EBD000E4B1010000009F4124EC00007F95A640B5
-:10EBE0008132000000009F4238EC00007F95A64073
-:10EBF00081320000B4000040439901008195A3F0E8
-:10EC00003A6C00000000804081B20100B400004076
-:10EC100043990100859522F03A6C0000B400201D54
-:10EC2000E0B1010080002D5F13940100859523F071
-:10EC30003A6C00008000201DE0B10100C0002012ED
-:10EC4000E0B10100C400A01CE0B10100008000039D
-:10EC500044C9010000000042E0B101001200004080
-:10EC6000879801008E959F41246C000000000041B0
-:10EC70008CB00100000000128CD001008F95004183
-:10EC800024B00000000000408DB00100DF9500407E
-:10EC9000813201000000004561B101004000001018
-:10ECA00062DD01000000A84081B2000091950040A3
-:10ECB00081B20000A29200408132010000000016E3
-:10ECC00080B201000000A708803201009995A2409F
-:10ECD000956C0000B092004081320100008200A6D5
-:10ECE00004B00100000000402DB00100A0982F40AA
-:10ECF00011B001003005004189B0000000009FF80C
-:10ED00003EEC000000009F12E0ED0000C80020ABC8
-:10ED1000E1B10100CC00A01FE0B10100A395A35F09
-:10ED2000E76D000000000041E7C10100A6000040BF
-:10ED300047990100B79522F2863000000300004396
-:10ED400084F401000100004180CC0100B8002D4294
-:10ED500080D001000000624086C00100AB951F43D7
-:10ED600080320000AC95A240876C00000000624138
-:10ED700087B00100B0959F40803200000000004045
-:10ED800085B001000000004084D001000000004276
-:10ED900080B00100000000F288B0010002000044D1
-:10EDA00084F40100B8002E4280D0010000006240CF
-:10EDB00088C00100B6951F4480320000BA95A24079
-:10EDC000896C0000BA95624189B00000030062417D
-:10EDD00086E40100B800004045990100010062414D
-:10EDE00088E40100A4002040E5B10100A200204019
-:10EDF000E7B10100BC002E4387F001000000004491
-:10EE000086C00100C0952043876C0000000080434D
-:10EE1000E5B101004001004380CE01000000A443A1
-:10EE2000E43101004001E2408798010088002D4450
-:10EE300081B0010090002DF22EB001009C002DF059
-:10EE400086B0010090002DF082B00100BA002DF0D4
-:10EE500098B00100CD95A212986C0000BC002DF274
-:10EE600098B00100CD95A0F2986C0000000000174A
-:10EE700082B001009C002041E0B10100B4002D12DD
-:10EE800086D00100D095A341E06D0000D19500F03F
-:10EE900084B000000000004184B0010080002D43D8
-:10EEA00084D00100D4959F428032000000000040D1
-:10EEB00085B00100D695A342146C0000D795000AD6
-:10EEC0000CB00000000000420CB00100D995A01762
-:10EED0000C6C0000000080170CB00100DE95224091
-:10EEE0000D6C00000000A00A0CEC0000010000F016
-:10EEF00082F40100DE95A0410C6C00000000A2F03D
-:10EF0000803201000000804081B00100B4920040D6
-:10EF1000813201000480000344C901000000004662
-:10EF2000F0B1010000000040F1B1010000006041BB
-:10EF3000879401000080001044C9010000000050C7
-:10EF4000F1B1010000000048F0B1010000000049EB
-:10EF5000F0B1010000000003E0B101000000004535
-:10EF600061B101002000001062DD01000000A85D19
-:10EF700005900000EA95004081B2000000002E4B91
-:10EF80001990010005002A0CE4B101000000800482
-:10EF9000E6B10100F095454861310000001000081D
-:10EFA00062DD0100F595284087300000F195224888
-:10EFB000777D000095941D4687B00000F895225F8C
-:10EFC000117C00000400221562310000F695A84073
-:10EFD0008132000000009D4081B20100000000402D
-:10EFE00049B1010000142F4C83B001000000004023
-:10EFF000F1B10100FB95A241835000000000804068
-:10F0000081B201000000004049B101003000004021
-:10F01000A19901000000004093B0010000000040F1
-:10F020001FB001004E9600499630010007000049CC
-:10F0300006E401000039000306C80100000000409A
-:10F0400005B00100200000D0A0C90100000000416F
-:10F0500093C001000296A054936C000000002E059E
-:10F0600097B0010000800040499901000000004075
-:10F07000E1B10100000200A244C901000B96A241C7
-:10F08000975000000000002049B301005496004052
-:10F0900049310100DF9200408132010000B52E08A5
-:10F0A00097B0010000000040F1B101001296A241AA
-:10F0B00097500000180000409798010000972E40DC
-:10F0C00081B2010000000040F1B101001696A2419A
-:10F0D000975000000000004049B1010040182E0583
-:10F0E00097B0010000000040F1B101001A96A24162
-:10F0F0009750000057952040E7B101003094004040
-:10F100004599010064000040E599010056952040B2
-:10F11000E7B10100B8942041E5B10100BA94204163
-:10F12000E5B10100989400404599010002000040BB
-:10F130009798010000000040F1B101002496A2411F
-:10F14000975000000000004097B001000000004010
-:10F150006FB101000000004B68B1010028968541A5
-:10F160009740000080040040813201000000004010
-:10F1700039B301000000004037B301000000004037
-:10F1800035B301000000004033B30100000000402F
-:10F1900041B30100000000403FB30100EE05004014
-:10F1A000259B0100420000404B9B010000000040F5
-:10F1B0002FB30100000000402DB30100000000400B
-:10F1C00047B301000000004043B30100600000406D
-:10F1D0002B9B010000000054EF930100000000553C
-:10F1E000F1930100FFFF00A53C8B01000000002C03
-:10F1F0005BB301000000002C45B30100000000409B
-:10F2000059B301000000004057B301000000004066
-:10F2100027B301000000004053B301004496A25000
-:10F22000FD7F00004496A251FD7F000045960040FE
-:10F230001DB30000504600401D9B010000C000A609
-:10F2400088B30100FF3F00A63AB3010000C0009D53
-:10F250003B9B0100B4050040239B010000000040DF
-:10F260004DB30100080A00A614B301000101008A91
-:10F27000159B0100008000A656B101000000805ED1
-:10F2800057B501001800004B20E401000600004BB8
-:10F2900096E401000043004B96C8010018000010DE
-:10F2A00020DC01000000004B20940100000080578A
-:10F2B0002190010000992E0A97B001000000004043
-:10F2C000F1B101005596A2419750000000030040A3
-:10F2D0009798010000A900404599010000000040F6
-:10F2E000F1B101005996A241975000003000004052
-:10F2F000979801000000005561B101000000004B2B
-:10F3000062B101005D96A840813200005D96A24185
-:10F31000975000000000804081B201000000804052
-:10F3200081B201000400004081B2000004000040EE
-:10F3300081B200000400004081B2000004000040DF
-:10F3400081B200000400004081B2000004000040CF
-:10F3500081B200000400004081B2000004000040BF
-:10F3600081B200000400004081B2000004000040AF
-:10F3700081B200000400004081B20000040000409F
-:10F3800081B200000400004081B20000040000408F
-:10F3900081B200000400004081B20000040000407F
-:10F3A00081B200000400004081B20000040000406F
-:10F3B00081B200000400004081B20000040000405F
-:10F3C00081B200000400004081B20000040000404F
-:10F3D00081B200000400004081B20000040000403F
-:10F3E00081B200000400004081B20000040000402F
-:10F3F00081B200000400004081B20000040000401F
-:10F4000081B200000400004081B20000040000400E
-:10F4100081B200000400004081B2000004000040FE
-:10F4200081B200000400004081B2000004000040EE
-:10F4300081B200000400004081B2000004000040DE
-:10F4400081B200000400004081B2000004000040CE
-:10F4500081B200000400004081B2000004000040BE
-:10F4600081B200000400004081B2000004000040AE
-:10F4700081B200000400004081B20000040000409E
-:10F4800081B200000400004081B20000040000408E
-:10F4900081B200000400004081B20000040000407E
-:10F4A00081B200000400004081B20000040000406E
-:10F4B00081B200000400004081B20000040000405E
-:10F4C00081B200000400004081B20000040000404E
-:10F4D00081B200000400004081B20000040000403E
-:10F4E00081B200000400004081B20000040000402E
-:10F4F00081B200000400004081B20000040000401E
-:10F5000081B200000400004081B20000040000400D
-:10F5100081B200000400004081B2000004000040FD
-:10F5200081B200000400004081B2000004000040ED
-:10F5300081B200000400004081B2000004000040DD
-:10F5400081B200000400004081B2000004000040CD
-:10F5500081B200000400004081B2000004000040BD
-:10F5600081B200000400004081B2000004000040AD
-:10F5700081B200000400004081B20000040000409D
-:10F5800081B200000400004081B20000040000408D
-:10F5900081B200000400004081B20000040000407D
-:10F5A00081B200000400004081B20000040000406D
-:10F5B00081B200000400004081B20000040000405D
-:10F5C00081B200000400004081B20000040000404D
-:10F5D00081B200000400004081B20000040000403D
-:10F5E00081B200000400004081B20000040000402D
-:10F5F00081B200000400004081B20000040000401D
-:10F6000081B200000400004081B20000040000400C
-:10F6100081B200000400004081B2000004000040FC
-:10F6200081B200000400004081B2000004000040EC
-:10F6300081B200000400004081B2000004000040DC
-:10F6400081B200000400004081B2000004000040CC
-:10F6500081B200000400004081B2000004000040BC
-:10F6600081B200000400004081B2000004000040AC
-:10F6700081B200000400004081B20000040000409C
-:10F6800081B200000400004081B20000040000408C
-:10F6900081B200000400004081B20000040000407C
-:10F6A00081B200000400004081B20000040000406C
-:10F6B00081B200000400004081B20000040000405C
-:10F6C00081B200000400004081B20000040000404C
-:10F6D00081B200000400004081B20000040000403C
-:10F6E00081B200000400004081B20000040000402C
-:10F6F00081B200000400004081B20000040000401C
-:10F7000081B200000400004081B20000040000400B
-:10F7100081B200000400004081B2000004000040FB
-:10F7200081B200000400004081B2000004000040EB
-:10F7300081B200000400004081B2000004000040DB
-:10F7400081B200000400004081B2000004000040CB
-:10F7500081B200000400004081B2000004000040BB
-:10F7600081B200000400004081B2000004000040AB
-:10F7700081B200000400004081B20000040000409B
-:10F7800081B200000400004081B20000040000408B
-:10F7900081B200000400004081B20000040000407B
-:10F7A00081B200000400004081B20000040000406B
-:10F7B00081B200000400004081B20000040000405B
-:10F7C00081B200000400004081B20000040000404B
-:10F7D00081B200000400004081B20000040000403B
-:10F7E00081B200000400004081B20000040000402B
-:10F7F00081B200000400004081B20000040000401B
-:10F8000081B200000400004081B20000040000400A
-:10F8100081B200000400004081B2000004000040FA
-:10F8200081B200000400004081B2000004000040EA
-:10F8300081B200000400004081B2000004000040DA
-:10F8400081B200000400004081B2000004000040CA
-:10F8500081B200000400004081B2000004000040BA
-:10F8600081B200000400004081B2000004000040AA
-:10F8700081B200000400004081B20000040000409A
-:10F8800081B200000400004081B20000040000408A
-:10F8900081B200000400004081B20000040000407A
-:10F8A00081B200000400004081B20000040000406A
-:10F8B00081B200000400004081B20000040000405A
-:10F8C00081B200000400004081B20000040000404A
-:10F8D00081B200000400004081B20000040000403A
-:10F8E00081B200000400004081B20000040000402A
-:10F8F00081B200000400004081B20000040000401A
-:10F9000081B200000400004081B200000400004009
-:10F9100081B200000400004081B2000004000040F9
-:10F9200081B200000400004081B2000004000040E9
-:10F9300081B200000400004081B2000004000040D9
-:10F9400081B200000400004081B2000004000040C9
-:10F9500081B200000400004081B2000004000040B9
-:10F9600081B200000400004081B2000004000040A9
-:10F9700081B200000400004081B200000400004099
-:10F9800081B200000400004081B200000400004089
-:10F9900081B200000400004081B200000400004079
-:10F9A00081B200000400004081B200000400004069
-:10F9B00081B200000400004081B200000400004059
-:10F9C00081B200000400004081B200000400004049
-:10F9D00081B200000400004081B200000400004039
-:10F9E00081B200000400004081B200000400004029
-:10F9F00081B200000400004081B200000400004019
-:10FA000081B200000400004081B200000400004008
-:10FA100081B200000400004081B2000004000040F8
-:10FA200081B200000400004081B2000004000040E8
-:10FA300081B200000400004081B2000004000040D8
-:10FA400081B200000400004081B2000004000040C8
-:10FA500081B200000400004081B2000004000040B8
-:10FA600081B200000400004081B2000004000040A8
-:10FA700081B200000400004081B200000400004098
-:10FA800081B200000400004081B200000400004088
-:10FA900081B200000400004081B200000400004078
-:10FAA00081B200000400004081B200000400004068
-:10FAB00081B200000400004081B200000400004058
-:10FAC00081B200000400004081B200000400004048
-:10FAD00081B200000400004081B200000400004038
-:10FAE00081B200000400004081B200000400004028
-:10FAF00081B200000400004081B200000400004018
-:10FB000081B200000400004081B200000400004007
-:10FB100081B200000400004081B2000004000040F7
-:10FB200081B200000400004081B2000004000040E7
-:10FB300081B200000400004081B2000004000040D7
-:10FB400081B200000400004081B2000004000040C7
-:10FB500081B200000400004081B2000004000040B7
-:10FB600081B200000400004081B2000004000040A7
-:10FB700081B200000400004081B200000400004097
-:10FB800081B200000400004081B200000400004087
-:10FB900081B200000400004081B200000400004077
-:10FBA00081B200000400004081B200000400004067
-:10FBB00081B200000400004081B200000400004057
-:10FBC00081B200000400004081B200000400004047
-:10FBD00081B200000400004081B200000400004037
-:10FBE00081B200000400004081B200000400004027
-:10FBF00081B200000400004081B200000400004017
-:10FC000081B200000400004081B200000400004006
-:10FC100081B200000400004081B2000004000040F6
-:10FC200081B200000400004081B2000004000040E6
-:10FC300081B200000400004081B2000004000040D6
-:10FC400081B200000400004081B2000004000040C6
-:10FC500081B200000400004081B2000004000040B6
-:10FC600081B200000400004081B2000004000040A6
-:10FC700081B200000400004081B200000400004096
-:10FC800081B200000400004081B200000400004086
-:10FC900081B200000400004081B200000400004076
-:10FCA00081B200000400004081B200000400004066
-:10FCB00081B200000400004081B200000400004056
-:10FCC00081B200000400004081B200000400004046
-:10FCD00081B200000400004081B200000400004036
-:10FCE00081B200000400004081B200000400004026
-:10FCF00081B200000400004081B200000400004016
-:10FD000081B200000400004081B200000400004005
-:10FD100081B200000400004081B2000004000040F5
-:10FD200081B200000400004081B2000004000040E5
-:10FD300081B200000400004081B2000004000040D5
-:10FD400081B200000400004081B2000004000040C5
-:10FD500081B200000400004081B2000004000040B5
-:10FD600081B200000400004081B2000004000040A5
-:10FD700081B200000400004081B200000400004095
-:10FD800081B200000400004081B200000400004085
-:10FD900081B200000400004081B200000400004075
-:10FDA00081B200000400004081B200000400004065
-:10FDB00081B200000400004081B200000400004055
-:10FDC00081B200000400004081B200000400004045
-:10FDD00081B200000400004081B200000400004035
-:10FDE00081B200000400004081B200000400004025
-:10FDF00081B200000400004081B200000400004015
-:10FE000081B200000400004081B200000400004004
-:10FE100081B200000400004081B2000004000040F4
-:10FE200081B200000400004081B2000004000040E4
-:10FE300081B200000400004081B2000004000040D4
-:10FE400081B200000400004081B2000004000040C4
-:10FE500081B200000400004081B2000004000040B4
-:10FE600081B200000400004081B2000004000040A4
-:10FE700081B200000400004081B200000400004094
-:10FE800081B200000400004081B200000400004084
-:10FE900081B200000400004081B200000400004074
-:10FEA00081B200000400004081B200000400004064
-:10FEB00081B200000400004081B200000400004054
-:10FEC00081B200000400004081B200000400004044
-:10FED00081B200000400004081B200000400004034
-:10FEE00081B200000400004081B200000400004024
-:10FEF00081B200000400004081B200000400004014
-:10FF000081B200000400004081B200000400004003
-:10FF100081B200000400004081B2000004000040F3
-:10FF200081B200000400004081B2000004000040E3
-:10FF300081B200000400004081B2000004000040D3
-:10FF400081B200000400004081B2000004000040C3
-:10FF500081B200000400004081B2000004000040B3
-:10FF600081B200000400004081B2000004000040A3
-:10FF700081B200000400004081B200000400004093
-:10FF800081B200000400004081B200000400004083
-:10FF900081B200000400004081B200000400004073
-:10FFA00081B200000400004081B200000400004063
-:10FFB00081B200000400004081B200000400004053
-:10FFC00081B200000400004081B200000400004043
-:10FFD00081B200000400004081B200000400004033
-:10FFE00081B200000400004081B200000400004023
-:10FFF00081B200000400004081B200000400004013
-:020000021000EC
-:1000000081B200000400004081B200000400004002
-:1000100081B200000400004081B2000004000040F2
-:1000200081B200000400004081B2000004000040E2
-:1000300081B200000400004081B2000004000040D2
-:1000400081B200000400004081B2000004000040C2
-:1000500081B200000400004081B2000004000040B2
-:1000600081B200000400004081B2000004000040A2
-:1000700081B200000400004081B200000400004092
-:1000800081B200000400004081B200000400004082
-:1000900081B200000400004081B200000400004072
-:1000A00081B200000400004081B200000400004062
-:1000B00081B200000400004081B200000400004052
-:1000C00081B200000400004081B200000400004042
-:1000D00081B200000400004081B200000400004032
-:1000E00081B200000400004081B200000400004022
-:1000F00081B200000400004081B200000400004012
-:1001000081B200000400004081B200000400004001
-:1001100081B200000400004081B2000004000040F1
-:1001200081B200000400004081B2000004000040E1
-:1001300081B200000400004081B2000004000040D1
-:1001400081B200000400004081B2000004000040C1
-:1001500081B200000400004081B2000004000040B1
-:1001600081B200000400004081B2000004000040A1
-:1001700081B200000400004081B200000400004091
-:1001800081B200000400004081B200000400004081
-:1001900081B200000400004081B200000400004071
-:1001A00081B200000400004081B200000400004061
-:1001B00081B200000400004081B200000400004051
-:1001C00081B200000400004081B200000400004041
-:1001D00081B200000400004081B200000400004031
-:1001E00081B200000400004081B200000400004021
-:1001F00081B200000400004081B200000400004011
-:1002000081B200000400004081B200000400004000
-:1002100081B200000400004081B2000004000040F0
-:1002200081B200000400004081B2000004000040E0
-:1002300081B200000400004081B2000004000040D0
-:1002400081B200000400004081B2000004000040C0
-:1002500081B200000400004081B2000004000040B0
-:1002600081B200000400004081B2000004000040A0
-:1002700081B200000400004081B200000400004090
-:1002800081B200000400004081B200000400004080
-:1002900081B200000400004081B200000400004070
-:1002A00081B200000400004081B200000400004060
-:1002B00081B200000400004081B200000400004050
-:1002C00081B200000400004081B200000400004040
-:1002D00081B200000400004081B200000400004030
-:1002E00081B200000400004081B200000400004020
-:1002F00081B200000400004081B200000400004010
-:1003000081B200000400004081B2000004000040FF
-:1003100081B200000400004081B2000004000040EF
-:1003200081B200000400004081B2000004000040DF
-:1003300081B200000400004081B2000004000040CF
-:1003400081B200000400004081B2000004000040BF
-:1003500081B200000400004081B2000004000040AF
-:1003600081B200000400004081B20000040000409F
-:1003700081B200000400004081B20000040000408F
-:1003800081B200000400004081B20000040000407F
-:1003900081B200000400004081B20000040000406F
-:1003A00081B200000400004081B20000040000405F
-:1003B00081B200000400004081B20000040000404F
-:1003C00081B200000400004081B20000040000403F
-:1003D00081B200000400004081B20000040000402F
-:1003E00081B200000400004081B20000040000401F
-:1003F00081B200000400004081B20000040000400F
-:1004000081B200000400004081B2000004000040FE
-:1004100081B200000400004081B2000004000040EE
-:1004200081B200000400004081B2000004000040DE
-:1004300081B200000400004081B2000004000040CE
-:1004400081B200000400004081B2000004000040BE
-:1004500081B200000400004081B2000004000040AE
-:1004600081B200000400004081B20000040000409E
-:1004700081B200000400004081B20000040000408E
-:1004800081B200000400004081B20000040000407E
-:1004900081B200000400004081B20000040000406E
-:1004A00081B200000400004081B20000040000405E
-:1004B00081B200000400004081B20000040000404E
-:1004C00081B200000400004081B20000040000403E
-:1004D00081B200000400004081B20000040000402E
-:1004E00081B200000400004081B20000040000401E
-:1004F00081B200000400004081B20000040000400E
-:1005000081B200000400004081B2000004000040FD
-:1005100081B200000400004081B2000004000040ED
-:1005200081B200000400004081B2000004000040DD
-:1005300081B200000400004081B2000004000040CD
-:1005400081B200000400004081B2000004000040BD
-:1005500081B200000400004081B2000004000040AD
-:1005600081B200000400004081B20000040000409D
-:1005700081B200000400004081B20000040000408D
-:1005800081B200000400004081B20000040000407D
-:1005900081B200000400004081B20000040000406D
-:1005A00081B200000400004081B20000040000405D
-:1005B00081B200000400004081B20000040000404D
-:1005C00081B200000400004081B20000040000403D
-:1005D00081B200000400004081B20000040000402D
-:1005E00081B200000400004081B20000040000401D
-:1005F00081B200000400004081B20000040000400D
-:1006000081B200000400004081B2000004000040FC
-:1006100081B200000400004081B2000004000040EC
-:1006200081B200000400004081B2000004000040DC
-:1006300081B200000400004081B2000004000040CC
-:1006400081B200000400004081B2000004000040BC
-:1006500081B200000400004081B2000004000040AC
-:1006600081B200000400004081B20000040000409C
-:1006700081B200000400004081B20000040000408C
-:1006800081B200000400004081B20000040000407C
-:1006900081B200000400004081B20000040000406C
-:1006A00081B200000400004081B20000040000405C
-:1006B00081B200000400004081B20000040000404C
-:1006C00081B200000400004081B20000040000403C
-:1006D00081B200000400004081B20000040000402C
-:1006E00081B200000400004081B20000040000401C
-:1006F00081B200000400004081B20000040000400C
-:1007000081B200000400004081B2000004000040FB
-:1007100081B200000400004081B2000004000040EB
-:1007200081B200000400004081B2000004000040DB
-:1007300081B200000400004081B2000004000040CB
-:1007400081B200000400004081B2000004000040BB
-:1007500081B200000400004081B2000004000040AB
-:1007600081B200000400004081B20000040000409B
-:1007700081B200000400004081B20000040000408B
-:1007800081B200000400004081B20000040000407B
-:1007900081B200000400004081B20000040000406B
-:1007A00081B200000400004081B20000040000405B
-:1007B00081B200000400004081B20000040000404B
-:1007C00081B200000400004081B20000040000403B
-:1007D00081B200000400004081B20000040000402B
-:1007E00081B200000400004081B20000040000401B
-:1007F00081B200000400004081B20000040000400B
-:1008000081B200000400004081B2000004000040FA
-:1008100081B200000400004081B2000004000040EA
-:1008200081B200000400004081B2000004000040DA
-:1008300081B200000400004081B2000004000040CA
-:1008400081B200000400004081B2000004000040BA
-:1008500081B200000400004081B2000004000040AA
-:1008600081B200000400004081B20000040000409A
-:1008700081B200000400004081B20000040000408A
-:1008800081B200000400004081B20000040000407A
-:1008900081B200000400004081B20000040000406A
-:1008A00081B200000400004081B20000040000405A
-:1008B00081B200000400004081B20000040000404A
-:1008C00081B200000400004081B20000040000403A
-:1008D00081B200000400004081B20000040000402A
-:1008E00081B200000400004081B20000040000401A
-:1008F00081B200000400004081B20000040000400A
-:1009000081B200000400004081B2000004000040F9
-:1009100081B200000400004081B2000004000040E9
-:1009200081B200000400004081B2000004000040D9
-:1009300081B200000400004081B2000004000040C9
-:1009400081B200000400004081B2000004000040B9
-:1009500081B200000400004081B2000004000040A9
-:1009600081B200000400004081B200000400004099
-:1009700081B200000400004081B200000400004089
-:1009800081B200000400004081B200000400004079
-:1009900081B200000400004081B200000400004069
-:1009A00081B200000400004081B200000400004059
-:1009B00081B200000400004081B200000400004049
-:1009C00081B200000400004081B200000400004039
-:1009D00081B200000400004081B200000400004029
-:1009E00081B200000400004081B200000400004019
-:1009F00081B200000400004081B200000400004009
-:100A000081B200000400004081B2000004000040F8
-:100A100081B200000400004081B2000004000040E8
-:100A200081B200000400004081B2000004000040D8
-:100A300081B200000400004081B2000004000040C8
-:100A400081B200000400004081B2000004000040B8
-:100A500081B200000400004081B2000004000040A8
-:100A600081B200000400004081B200000400004098
-:100A700081B200000400004081B200000400004088
-:100A800081B200000400004081B200000400004078
-:100A900081B200000400004081B200000400004068
-:100AA00081B200000400004081B200000400004058
-:100AB00081B200000400004081B200000400004048
-:100AC00081B200000400004081B200000400004038
-:100AD00081B200000400004081B200000400004028
-:100AE00081B200000400004081B200000400004018
-:100AF00081B200000400004081B200000400004008
-:100B000081B200000400004081B2000004000040F7
-:100B100081B200000400004081B2000004000040E7
-:100B200081B200000400004081B2000004000040D7
-:100B300081B200000400004081B2000004000040C7
-:100B400081B200000400004081B2000004000040B7
-:100B500081B200000400004081B2000004000040A7
-:100B600081B200000400004081B200000400004097
-:100B700081B200000400004081B200000400004087
-:100B800081B200000400004081B200000400004077
-:100B900081B200000400004081B200000400004067
-:100BA00081B200000400004081B200000400004057
-:100BB00081B200000400004081B200000400004047
-:100BC00081B200000400004081B200000400004037
-:100BD00081B200000400004081B200000400004027
-:100BE00081B200000400004081B200000400004017
-:100BF00081B200000400004081B200000400004007
-:100C000081B200000400004081B2000004000040F6
-:100C100081B200000400004081B2000004000040E6
-:100C200081B200000400004081B2000004000040D6
-:100C300081B200000400004081B2000004000040C6
-:100C400081B200000400004081B2000004000040B6
-:100C500081B200000400004081B2000004000040A6
-:100C600081B200000400004081B200000400004096
-:100C700081B200000400004081B200000400004086
-:100C800081B200000400004081B200000400004076
-:100C900081B200000400004081B200000400004066
-:100CA00081B200000400004081B200000400004056
-:100CB00081B200000400004081B200000400004046
-:100CC00081B200000400004081B200000400004036
-:100CD00081B200000400004081B200000400004026
-:100CE00081B200000400004081B200000400004016
-:100CF00081B200000400004081B200000400004006
-:100D000081B200000400004081B2000004000040F5
-:100D100081B200000400004081B2000004000040E5
-:100D200081B200000400004081B2000004000040D5
-:100D300081B200000400004081B2000004000040C5
-:100D400081B200000400004081B2000004000040B5
-:100D500081B200000400004081B2000004000040A5
-:100D600081B200000400004081B200000400004095
-:100D700081B200000400004081B200000400004085
-:100D800081B200000400004081B200000400004075
-:100D900081B200000400004081B200000400004065
-:100DA00081B200000400004081B200000400004055
-:100DB00081B200000400004081B200000400004045
-:100DC00081B200000400004081B200000400004035
-:100DD00081B200000400004081B200000400004025
-:100DE00081B200000400004081B200000400004015
-:100DF00081B200000400004081B200000400004005
-:100E000081B200000400004081B2000004000040F4
-:100E100081B200000400004081B2000004000040E4
-:100E200081B200000400004081B2000004000040D4
-:100E300081B200000400004081B2000004000040C4
-:100E400081B200000400004081B2000004000040B4
-:100E500081B200000400004081B2000004000040A4
-:100E600081B200000400004081B200000400004094
-:100E700081B200000400004081B200000400004084
-:100E800081B200000400004081B200000400004074
-:100E900081B200000400004081B200000400004064
-:100EA00081B200000400004081B200000400004054
-:100EB00081B200000400004081B200000400004044
-:100EC00081B200000400004081B200000400004034
-:100ED00081B200000400004081B200000400004024
-:100EE00081B200000400004081B200000400004014
-:100EF00081B200000400004081B200000400004004
-:100F000081B200000400004081B2000004000040F3
-:100F100081B200000400004081B2000004000040E3
-:100F200081B200000400004081B2000004000040D3
-:100F300081B200000400004081B2000004000040C3
-:100F400081B200000400004081B2000004000040B3
-:100F500081B200000400004081B2000004000040A3
-:100F600081B200000400004081B200000400004093
-:100F700081B200000400004081B200000400004083
-:100F800081B200000400004081B200000400004073
-:100F900081B200000400004081B200000400004063
-:100FA00081B200000400004081B200000400004053
-:100FB00081B200000400004081B200000400004043
-:100FC00081B200000400004081B200000400004033
-:100FD00081B200000400004081B200000400004023
-:100FE00081B200000400004081B200000400004013
-:100FF00081B200000400004081B200000400004003
-:1010000081B200000400004081B2000004000040F2
-:1010100081B200000400004081B2000004000040E2
-:1010200081B200000400004081B2000004000040D2
-:1010300081B200000400004081B2000004000040C2
-:1010400081B200000400004081B2000004000040B2
-:1010500081B200000400004081B2000004000040A2
-:1010600081B200000400004081B200000400004092
-:1010700081B200000400004081B200000400004082
-:1010800081B200000400004081B200000400004072
-:1010900081B200000400004081B200000400004062
-:1010A00081B200000400004081B200000400004052
-:1010B00081B200000400004081B200000400004042
-:1010C00081B200000400004081B200000400004032
-:1010D00081B200000400004081B200000400004022
-:1010E00081B200000400004081B200000400004012
-:1010F00081B200000400004081B200000400004002
-:1011000081B200000400004081B2000004000040F1
-:1011100081B200000400004081B2000004000040E1
-:1011200081B200000400004081B2000004000040D1
-:1011300081B200000400004081B2000004000040C1
-:1011400081B200000400004081B2000004000040B1
-:1011500081B200000400004081B2000004000040A1
-:1011600081B200000400004081B200000400004091
-:1011700081B200000400004081B200000400004081
-:1011800081B200000400004081B200000400004071
-:1011900081B200000400004081B200000400004061
-:1011A00081B200000400004081B200000400004051
-:1011B00081B200000400004081B200000400004041
-:1011C00081B200000400004081B200000400004031
-:1011D00081B200000400004081B200000400004021
-:1011E00081B200000400004081B200000400004011
-:1011F00081B200000400004081B200000400004001
-:1012000081B200000400004081B2000004000040F0
-:1012100081B200000400004081B2000004000040E0
-:1012200081B200000400004081B2000004000040D0
-:1012300081B200000400004081B2000004000040C0
-:1012400081B200000400004081B2000004000040B0
-:1012500081B200000400004081B2000004000040A0
-:1012600081B200000400004081B200000400004090
-:1012700081B200000400004081B200000400004080
-:1012800081B200000400004081B200000400004070
-:1012900081B200000400004081B200000400004060
-:1012A00081B200000400004081B200000400004050
-:1012B00081B200000400004081B200000400004040
-:1012C00081B200000400004081B200000400004030
-:1012D00081B200000400004081B200000400004020
-:1012E00081B200000400004081B200000400004010
-:1012F00081B200000400004081B200000400004000
-:1013000081B200000400004081B2000004000040EF
-:1013100081B200000400004081B2000004000040DF
-:1013200081B200000400004081B2000004000040CF
-:1013300081B200000400004081B2000004000040BF
-:1013400081B200000400004081B2000004000040AF
-:1013500081B200000400004081B20000040000409F
-:1013600081B200000400004081B20000040000408F
-:1013700081B200000400004081B20000040000407F
-:1013800081B200000400004081B20000040000406F
-:1013900081B200000400004081B20000040000405F
-:1013A00081B200000400004081B20000040000404F
-:1013B00081B200000400004081B20000040000403F
-:1013C00081B200000400004081B20000040000402F
-:1013D00081B200000400004081B20000040000401F
-:1013E00081B200000400004081B20000040000400F
-:1013F00081B200000400004081B2000004000040FF
-:1014000081B200000400004081B2000004000040EE
-:1014100081B200000400004081B2000004000040DE
-:1014200081B200000400004081B2000004000040CE
-:1014300081B200000400004081B2000004000040BE
-:1014400081B200000400004081B2000004000040AE
-:1014500081B200000400004081B20000040000409E
-:1014600081B200000400004081B20000040000408E
-:1014700081B200000400004081B20000040000407E
-:1014800081B200000400004081B20000040000406E
-:1014900081B200000400004081B20000040000405E
-:1014A00081B200000400004081B20000040000404E
-:1014B00081B200000400004081B20000040000403E
-:1014C00081B200000400004081B20000040000402E
-:1014D00081B200000400004081B20000040000401E
-:1014E00081B200000400004081B20000040000400E
-:1014F00081B200000400004081B2000004000040FE
-:1015000081B200000400004081B2000004000040ED
-:1015100081B200000400004081B2000004000040DD
-:1015200081B200000400004081B2000004000040CD
-:1015300081B200000400004081B2000004000040BD
-:1015400081B200000400004081B2000004000040AD
-:1015500081B200000400004081B20000040000409D
-:1015600081B200000400004081B20000040000408D
-:1015700081B200000400004081B20000040000407D
-:1015800081B200000400004081B20000040000406D
-:1015900081B200000400004081B20000040000405D
-:1015A00081B200000400004081B20000040000404D
-:1015B00081B200000400004081B20000040000403D
-:1015C00081B200000400004081B20000040000402D
-:1015D00081B200000400004081B20000040000401D
-:1015E00081B200000400004081B20000040000400D
-:1015F00081B200000400004081B2000004000040FD
-:1016000081B200000400004081B2000004000040EC
-:1016100081B200000400004081B2000004000040DC
-:1016200081B200000400004081B2000004000040CC
-:1016300081B200000400004081B2000004000040BC
-:1016400081B200000400004081B2000004000040AC
-:1016500081B200000400004081B20000040000409C
-:1016600081B200000400004081B20000040000408C
-:1016700081B200000400004081B20000040000407C
-:1016800081B200000400004081B20000040000406C
-:1016900081B200000400004081B20000040000405C
-:1016A00081B200000400004081B20000040000404C
-:1016B00081B200000400004081B20000040000403C
-:1016C00081B200000400004081B20000040000402C
-:1016D00081B200000400004081B20000040000401C
-:1016E00081B200000400004081B20000040000400C
-:1016F00081B200000400004081B2000004000040FC
-:1017000081B200000400004081B2000004000040EB
-:1017100081B200000400004081B2000004000040DB
-:1017200081B200000400004081B2000004000040CB
-:1017300081B200000400004081B2000004000040BB
-:1017400081B200000400004081B2000004000040AB
-:1017500081B200000400004081B20000040000409B
-:1017600081B200000400004081B20000040000408B
-:1017700081B200000400004081B20000040000407B
-:1017800081B200000400004081B20000040000406B
-:1017900081B200000400004081B20000040000405B
-:1017A00081B200000400004081B20000040000404B
-:1017B00081B200000400004081B20000040000403B
-:1017C00081B200000400004081B20000040000402B
-:1017D00081B200000400004081B20000040000401B
-:1017E00081B200000400004081B20000040000400B
-:1017F00081B200000400004081B2000004000040FB
-:1018000081B200000400004081B2000004000040EA
-:1018100081B200000400004081B2000004000040DA
-:1018200081B200000400004081B2000004000040CA
-:1018300081B200000400004081B2000004000040BA
-:1018400081B200000400004081B2000004000040AA
-:1018500081B200000400004081B20000040000409A
-:1018600081B200000400004081B20000040000408A
-:1018700081B200000400004081B20000040000407A
-:1018800081B200000400004081B20000040000406A
-:1018900081B200000400004081B20000040000405A
-:1018A00081B200000400004081B20000040000404A
-:1018B00081B200000400004081B20000040000403A
-:1018C00081B200000400004081B20000040000402A
-:1018D00081B200000400004081B20000040000401A
-:1018E00081B200000400004081B20000040000400A
-:1018F00081B200000400004081B2000004000040FA
-:1019000081B200000400004081B2000004000040E9
-:1019100081B200000400004081B2000004000040D9
-:1019200081B200000400004081B2000004000040C9
-:1019300081B200000400004081B2000004000040B9
-:1019400081B200000400004081B2000004000040A9
-:1019500081B200000400004081B200000400004099
-:1019600081B200000400004081B200000400004089
-:1019700081B200000400004081B200000400004079
-:1019800081B200000400004081B200000400004069
-:1019900081B200000400004081B200000400004059
-:1019A00081B200000400004081B200000400004049
-:1019B00081B200000400004081B200000400004039
-:1019C00081B200000400004081B200000400004029
-:1019D00081B200000400004081B200000400004019
-:1019E00081B200000400004081B200000400004009
-:1019F00081B200000400004081B2000004000040F9
-:101A000081B200000400004081B2000004000040E8
-:101A100081B200000400004081B2000004000040D8
-:101A200081B200000400004081B2000004000040C8
-:101A300081B200000400004081B2000004000040B8
-:101A400081B200000400004081B2000004000040A8
-:101A500081B200000400004081B200000400004098
-:101A600081B200000400004081B200000400004088
-:101A700081B200000400004081B200000400004078
-:101A800081B200000400004081B200000400004068
-:101A900081B200000400004081B200000400004058
-:101AA00081B200000400004081B200000400004048
-:101AB00081B200000400004081B200000400004038
-:101AC00081B200000400004081B200000400004028
-:101AD00081B200000400004081B200000400004018
-:101AE00081B200000400004081B200000400004008
-:101AF00081B200000400004081B2000004000040F8
-:101B000081B200000400004081B2000004000040E7
-:101B100081B200000400004081B2000004000040D7
-:101B200081B200000400004081B2000004000040C7
-:101B300081B200000400004081B2000004000040B7
-:101B400081B200000400004081B2000004000040A7
-:101B500081B200000400004081B200000400004097
-:101B600081B200000400004081B200000400004087
-:101B700081B200000400004081B200000400004077
-:101B800081B200000400004081B200000400004067
-:101B900081B200000400004081B200000400004057
-:101BA00081B200000400004081B200000400004047
-:101BB00081B200000400004081B200000400004037
-:101BC00081B200000400004081B200000400004027
-:101BD00081B200000400004081B200000400004017
-:101BE00081B200000400004081B200000400004007
-:101BF00081B200000400004081B2000004000040F7
-:101C000081B200000400004081B2000004000040E6
-:101C100081B200000400004081B2000004000040D6
-:101C200081B200000400004081B2000004000040C6
-:101C300081B200000400004081B2000004000040B6
-:101C400081B200000400004081B2000004000040A6
-:101C500081B200000400004081B200000400004096
-:101C600081B200000400004081B200000400004086
-:101C700081B200000400004081B200000400004076
-:101C800081B200000400004081B200000400004066
-:101C900081B200000400004081B200000400004056
-:101CA00081B200000400004081B200000400004046
-:101CB00081B200000400004081B200000400004036
-:101CC00081B200000400004081B200000400004026
-:101CD00081B200000400004081B200000400004016
-:101CE00081B200000400004081B200000400004006
-:101CF00081B200000400004081B2000004000040F6
-:101D000081B200000400004081B2000004000040E5
-:101D100081B200000400004081B2000004000040D5
-:101D200081B200000400004081B2000004000040C5
-:101D300081B200000400004081B2000004000040B5
-:101D400081B200000400004081B2000004000040A5
-:101D500081B200000400004081B200000400004095
-:101D600081B200000400004081B200000400004085
-:101D700081B200000400004081B200000400004075
-:101D800081B200000400004081B200000400004065
-:101D900081B200000400004081B200000400004055
-:101DA00081B200000400004081B200000400004045
-:101DB00081B200000400004081B200000400004035
-:101DC00081B200000400004081B200000400004025
-:101DD00081B200000400004081B200000400004015
-:101DE00081B200000400004081B200000400004005
-:101DF00081B200000400004081B2000004000040F5
-:101E000081B200000400004081B2000004000040E4
-:101E100081B200000400004081B2000004000040D4
-:101E200081B200000400004081B2000004000040C4
-:101E300081B200000400004081B2000004000040B4
-:101E400081B200000400004081B2000004000040A4
-:101E500081B200000400004081B200000400004094
-:101E600081B200000400004081B200000400004084
-:101E700081B200000400004081B200000400004074
-:101E800081B200000400004081B200000400004064
-:101E900081B200000400004081B200000400004054
-:101EA00081B200000400004081B200000400004044
-:101EB00081B200000400004081B200000400004034
-:101EC00081B200000400004081B200000400004024
-:101ED00081B200000400004081B200000400004014
-:101EE00081B200000400004081B200000400004004
-:101EF00081B200000400004081B2000004000040F4
-:101F000081B200000400004081B2000004000040E3
-:101F100081B200000400004081B2000004000040D3
-:101F200081B200000400004081B2000004000040C3
-:101F300081B200000400004081B2000004000040B3
-:101F400081B200000400004081B2000004000040A3
-:101F500081B200000400004081B200000400004093
-:101F600081B200000400004081B200000400004083
-:101F700081B200000400004081B200000400004073
-:101F800081B200000400004081B200000400004063
-:101F900081B200000400004081B200000400004053
-:101FA00081B200000400004081B200000400004043
-:101FB00081B200000400004081B200000400004033
-:101FC00081B200000400004081B200000400004023
-:101FD00081B200000400004081B200000400004013
-:101FE00081B200000400004081B200000400004003
-:101FF00081B200000400004081B2000004000040F3
-:1020000081B200000400004081B2000004000040E2
-:1020100081B200000400004081B2000004000040D2
-:1020200081B200000400004081B2000004000040C2
-:1020300081B200000400004081B2000004000040B2
-:1020400081B200000400004081B2000004000040A2
-:1020500081B200000400004081B200000400004092
-:1020600081B200000400004081B200000400004082
-:1020700081B200000400004081B200000400004072
-:1020800081B200000400004081B200000400004062
-:1020900081B200000400004081B200000400004052
-:1020A00081B200000400004081B200000400004042
-:1020B00081B200000400004081B200000400004032
-:1020C00081B200000400004081B200000400004022
-:1020D00081B200000400004081B200000400004012
-:1020E00081B200000400004081B200000400004002
-:1020F00081B200000400004081B2000004000040F2
-:1021000081B200000400004081B2000004000040E1
-:1021100081B200000400004081B2000004000040D1
-:1021200081B200000400004081B2000004000040C1
-:1021300081B200000400004081B2000004000040B1
-:1021400081B200000400004081B2000004000040A1
-:1021500081B200000400004081B200000400004091
-:1021600081B200000400004081B200000400004081
-:1021700081B200000400004081B200000400004071
-:1021800081B200000400004081B200000400004061
-:1021900081B200000400004081B200000400004051
-:1021A00081B200000400004081B200000400004041
-:1021B00081B200000400004081B200000400004031
-:1021C00081B200000400004081B200000400004021
-:1021D00081B200000400004081B200000400004011
-:1021E00081B200000400004081B200000400004001
-:1021F00081B200000400004081B2000004000040F1
-:1022000081B200000400004081B2000004000040E0
-:1022100081B200000400004081B2000004000040D0
-:1022200081B200000400004081B2000004000040C0
-:1022300081B200000400004081B2000004000040B0
-:1022400081B200000400004081B2000004000040A0
-:1022500081B200000400004081B200000400004090
-:1022600081B200000400004081B200000400004080
-:1022700081B200000400004081B200000400004070
-:1022800081B200000400004081B200000400004060
-:1022900081B200000400004081B200000400004050
-:1022A00081B200000400004081B200000400004040
-:1022B00081B200000400004081B200000400004030
-:1022C00081B200000400004081B200000400004020
-:1022D00081B200000400004081B200000400004010
-:1022E00081B200000400004081B200000400004000
-:1022F00081B200000400004081B2000004000040F0
-:1023000081B200000400004081B2000004000040DF
-:1023100081B200000400004081B2000004000040CF
-:1023200081B200000400004081B2000004000040BF
-:1023300081B200000400004081B2000004000040AF
-:1023400081B200000400004081B20000040000409F
-:1023500081B200000400004081B20000040000408F
-:1023600081B200000400004081B20000040000407F
-:1023700081B200000400004081B20000040000406F
-:1023800081B200000400004081B20000040000405F
-:1023900081B200000400004081B20000040000404F
-:1023A00081B200000400004081B20000040000403F
-:1023B00081B200000400004081B20000040000402F
-:1023C00081B200000400004081B20000040000401F
-:1023D00081B200000400004081B20000040000400F
-:1023E00081B200000400004081B2000004000040FF
-:1023F00081B200000400004081B2000004000040EF
-:1024000081B200000400004081B2000004000040DE
-:1024100081B200000400004081B2000004000040CE
-:1024200081B200000400004081B2000004000040BE
-:1024300081B200000400004081B2000004000040AE
-:1024400081B200000400004081B20000040000409E
-:1024500081B200000400004081B20000040000408E
-:1024600081B200000400004081B20000040000407E
-:1024700081B200000400004081B20000040000406E
-:1024800081B200000400004081B20000040000405E
-:1024900081B200000400004081B20000040000404E
-:1024A00081B200000400004081B20000040000403E
-:1024B00081B200000400004081B20000040000402E
-:1024C00081B200000400004081B20000040000401E
-:1024D00081B200000400004081B20000040000400E
-:1024E00081B200000400004081B2000004000040FE
-:1024F00081B200000400004081B2000004000040EE
-:1025000081B200000400004081B2000004000040DD
-:1025100081B200000400004081B2000004000040CD
-:1025200081B200000400004081B2000004000040BD
-:1025300081B200000400004081B2000004000040AD
-:1025400081B200000400004081B20000040000409D
-:1025500081B200000400004081B20000040000408D
-:1025600081B200000400004081B20000040000407D
-:1025700081B200000400004081B20000040000406D
-:1025800081B200000400004081B20000040000405D
-:1025900081B200000400004081B20000040000404D
-:1025A00081B200000400004081B20000040000403D
-:1025B00081B200000400004081B20000040000402D
-:1025C00081B200000400004081B20000040000401D
-:1025D00081B200000400004081B20000040000400D
-:1025E00081B200000400004081B2000004000040FD
-:1025F00081B200000400004081B2000004000040ED
-:1026000081B200000400004081B2000004000040DC
-:1026100081B200000400004081B2000004000040CC
-:1026200081B200000400004081B2000004000040BC
-:1026300081B200000400004081B2000004000040AC
-:1026400081B200000400004081B20000040000409C
-:1026500081B200000400004081B20000040000408C
-:1026600081B200000400004081B20000040000407C
-:1026700081B200000400004081B20000040000406C
-:1026800081B200000400004081B20000040000405C
-:1026900081B200000400004081B20000040000404C
-:1026A00081B200000400004081B20000040000403C
-:1026B00081B200000400004081B20000040000402C
-:1026C00081B200000400004081B20000040000401C
-:1026D00081B200000400004081B20000040000400C
-:1026E00081B200000400004081B2000004000040FC
-:1026F00081B200000400004081B2000004000040EC
-:1027000081B200000400004081B2000004000040DB
-:1027100081B200000400004081B2000004000040CB
-:1027200081B200000400004081B2000004000040BB
-:1027300081B200000400004081B2000004000040AB
-:1027400081B200000400004081B20000040000409B
-:1027500081B200000400004081B20000040000408B
-:1027600081B200000400004081B20000040000407B
-:1027700081B200000400004081B20000040000406B
-:1027800081B200000400004081B20000040000405B
-:1027900081B200000400004081B20000040000404B
-:1027A00081B200000400004081B20000040000403B
-:1027B00081B200000400004081B20000040000402B
-:1027C00081B200000400004081B20000040000401B
-:1027D00081B200000400004081B20000040000400B
-:1027E00081B200000400004081B2000004000040FB
-:1027F00081B200000400004081B2000004000040EB
-:1028000081B200000400004081B2000004000040DA
-:1028100081B200000400004081B2000004000040CA
-:1028200081B200000400004081B2000004000040BA
-:1028300081B200000400004081B2000004000040AA
-:1028400081B200000400004081B20000040000409A
-:1028500081B200000400004081B20000040000408A
-:1028600081B200000400004081B20000040000407A
-:1028700081B200000400004081B20000040000406A
-:1028800081B200000400004081B20000040000405A
-:1028900081B200000400004081B20000040000404A
-:1028A00081B200000400004081B20000040000403A
-:1028B00081B200000400004081B20000040000402A
-:1028C00081B200000400004081B20000040000401A
-:1028D00081B200000400004081B20000040000400A
-:1028E00081B200000400004081B2000004000040FA
-:1028F00081B200000400004081B2000004000040EA
-:1029000081B200000400004081B2000004000040D9
-:1029100081B200000400004081B2000004000040C9
-:1029200081B200000400004081B2000004000040B9
-:1029300081B200000400004081B2000004000040A9
-:1029400081B200000400004081B200000400004099
-:1029500081B200000400004081B200000400004089
-:1029600081B200000400004081B200000400004079
-:1029700081B200000400004081B200000400004069
-:1029800081B200000400004081B200000400004059
-:1029900081B200000400004081B200000400004049
-:1029A00081B200000400004081B200000400004039
-:1029B00081B200000400004081B200000400004029
-:1029C00081B200000400004081B200000400004019
-:1029D00081B200000400004081B200000400004009
-:1029E00081B200000400004081B2000004000040F9
-:1029F00081B200000400004081B2000004000040E9
-:102A000081B200000400004081B2000004000040D8
-:102A100081B200000400004081B2000004000040C8
-:102A200081B200000400004081B2000004000040B8
-:102A300081B200000400004081B2000004000040A8
-:102A400081B200000400004081B200000400004098
-:102A500081B200000400004081B200000400004088
-:102A600081B200000400004081B200000400004078
-:102A700081B200000400004081B200000400004068
-:102A800081B200000400004081B200000400004058
-:102A900081B200000400004081B200000400004048
-:102AA00081B200000400004081B200000400004038
-:102AB00081B200000400004081B200000400004028
-:102AC00081B200000400004081B200000400004018
-:102AD00081B200000400004081B200000400004008
-:102AE00081B200000400004081B2000004000040F8
-:102AF00081B200000400004081B2000004000040E8
-:102B000081B200000400004081B2000004000040D7
-:102B100081B200000400004081B2000004000040C7
-:102B200081B200000400004081B2000004000040B7
-:102B300081B200000400004081B2000004000040A7
-:102B400081B200000400004081B200000400004097
-:102B500081B200000400004081B200000400004087
-:102B600081B200000400004081B200000400004077
-:102B700081B200000400004081B200000400004067
-:102B800081B200000400004081B200000400004057
-:102B900081B200000400004081B200000400004047
-:102BA00081B200000400004081B200000400004037
-:102BB00081B200000400004081B200000400004027
-:102BC00081B200000400004081B200000400004017
-:102BD00081B200000400004081B200000400004007
-:102BE00081B200000400004081B2000004000040F7
-:102BF00081B200000400004081B2000004000040E7
-:102C000081B200000400004081B2000004000040D6
-:102C100081B200000400004081B2000004000040C6
-:102C200081B200000400004081B2000004000040B6
-:102C300081B200000400004081B2000004000040A6
-:102C400081B200000400004081B200000400004096
-:102C500081B200000400004081B200000400004086
-:102C600081B200000400004081B200000400004076
-:102C700081B200000400004081B200000400004066
-:102C800081B200000400004081B200000400004056
-:102C900081B200000400004081B200000400004046
-:102CA00081B200000400004081B200000400004036
-:102CB00081B200000400004081B200000400004026
-:102CC00081B200000400004081B200000400004016
-:102CD00081B200000400004081B200000400004006
-:102CE00081B200000400004081B2000004000040F6
-:102CF00081B200000400004081B2000004000040E6
-:102D000081B200000400004081B2000004000040D5
-:102D100081B200000400004081B2000004000040C5
-:102D200081B200000400004081B2000004000040B5
-:102D300081B200000400004081B2000004000040A5
-:102D400081B200000400004081B200000400004095
-:102D500081B200000400004081B200000400004085
-:102D600081B200000400004081B200000400004075
-:102D700081B200000400004081B200000400004065
-:102D800081B200000400004081B200000400004055
-:102D900081B200000400004081B200000400004045
-:102DA00081B200000400004081B200000400004035
-:102DB00081B200000400004081B200000400004025
-:102DC00081B200000400004081B200000400004015
-:102DD00081B200000400004081B200000400004005
-:102DE00081B200000400004081B2000004000040F5
-:102DF00081B200000400004081B2000004000040E5
-:102E000081B200000400004081B2000004000040D4
-:102E100081B200000400004081B2000004000040C4
-:102E200081B200000400004081B2000004000040B4
-:102E300081B200000400004081B2000004000040A4
-:102E400081B200000400004081B200000400004094
-:102E500081B200000400004081B200000400004084
-:102E600081B200000400004081B200000400004074
-:102E700081B200000400004081B200000400004064
-:102E800081B200000400004081B200000400004054
-:102E900081B200000400004081B200000400004044
-:102EA00081B200000400004081B200000400004034
-:102EB00081B200000400004081B200000400004024
-:102EC00081B200000400004081B200000400004014
-:102ED00081B200000400004081B200000400004004
-:102EE00081B200000400004081B2000004000040F4
-:102EF00081B200000400004081B2000004000040E4
-:102F000081B200000400004081B2000004000040D3
-:102F100081B200000400004081B2000004000040C3
-:102F200081B200000400004081B2000004000040B3
-:102F300081B200000400004081B2000004000040A3
-:102F400081B200000400004081B200000400004093
-:102F500081B200000400004081B200000400004083
-:102F600081B200000400004081B200000400004073
-:102F700081B200000400004081B200000400004063
-:102F800081B200000400004081B200000400004053
-:102F900081B200000400004081B200000400004043
-:102FA00081B200000400004081B200000400004033
-:102FB00081B200000400004081B200000400004023
-:102FC00081B200000400004081B200000400004013
-:102FD00081B200000400004081B200000400004003
-:102FE00081B200000400004081B2000004000040F3
-:102FF00081B200000400004081B2000004000040E3
-:1030000081B200000400004081B2000004000040D2
-:1030100081B200000400004081B2000004000040C2
-:1030200081B200000400004081B2000004000040B2
-:1030300081B200000400004081B2000004000040A2
-:1030400081B200000400004081B200000400004092
-:1030500081B200000400004081B200000400004082
-:1030600081B200000400004081B200000400004072
-:1030700081B200000400004081B200000400004062
-:1030800081B200000400004081B200000400004052
-:1030900081B200000400004081B200000400004042
-:1030A00081B200000400004081B200000400004032
-:1030B00081B200000400004081B200000400004022
-:1030C00081B200000400004081B200000400004012
-:1030D00081B200000400004081B200000400004002
-:1030E00081B200000400004081B2000004000040F2
-:1030F00081B200000400004081B2000004000040E2
-:1031000081B200000400004081B2000004000040D1
-:1031100081B200000400004081B2000004000040C1
-:1031200081B200000400004081B2000004000040B1
-:1031300081B200000400004081B2000004000040A1
-:1031400081B200000400004081B200000400004091
-:1031500081B200000400004081B200000400004081
-:1031600081B200000400004081B200000400004071
-:1031700081B200000400004081B200000400004061
-:1031800081B200000400004081B200000400004051
-:1031900081B200000400004081B200000400004041
-:1031A00081B200000400004081B200000400004031
-:1031B00081B200000400004081B200000400004021
-:1031C00081B200000400004081B200000400004011
-:1031D00081B200000400004081B200000400004001
-:1031E00081B200000400004081B2000004000040F1
-:1031F00081B200000400004081B2000004000040E1
-:1032000081B200000400004081B2000004000040D0
-:1032100081B200000400004081B2000004000040C0
-:1032200081B200000400004081B2000004000040B0
-:1032300081B200000400004081B2000004000040A0
-:1032400081B200000400004081B200000400004090
-:1032500081B200000400004081B200000400004080
-:1032600081B200000400004081B200000400004070
-:1032700081B200000400004081B200000400004060
-:1032800081B200000400004081B200000400004050
-:1032900081B200000400004081B200000400004040
-:1032A00081B200000400004081B200000400004030
-:1032B00081B200000400004081B200000400004020
-:1032C00081B200000400004081B200000400004010
-:1032D00081B200000400004081B200000400004000
-:1032E00081B200000400004081B2000004000040F0
-:1032F00081B200000400004081B2000004000040E0
-:1033000081B200000400004081B2000004000040CF
-:1033100081B200000400004081B2000004000040BF
-:1033200081B200000400004081B2000004000040AF
-:1033300081B200000400004081B20000040000409F
-:1033400081B200000400004081B20000040000408F
-:1033500081B200000400004081B20000040000407F
-:1033600081B200000400004081B20000040000406F
-:1033700081B200000400004081B20000040000405F
-:1033800081B200000400004081B20000040000404F
-:1033900081B200000400004081B20000040000403F
-:1033A00081B200000400004081B20000040000402F
-:1033B00081B200000400004081B20000040000401F
-:1033C00081B200000400004081B20000040000400F
-:1033D00081B200000400004081B2000004000040FF
-:1033E00081B200000400004081B2000004000040EF
-:1033F00081B200000400004081B2000004000040DF
-:1034000081B200000400004081B2000004000040CE
-:1034100081B200000400004081B2000004000040BE
-:1034200081B200000400004081B2000004000040AE
-:1034300081B200000400004081B20000040000409E
-:1034400081B200000400004081B20000040000408E
-:1034500081B200000400004081B20000040000407E
-:1034600081B200000400004081B20000040000406E
-:1034700081B200000400004081B20000040000405E
-:1034800081B200000400004081B20000040000404E
-:1034900081B200000400004081B20000040000403E
-:1034A00081B200000400004081B20000040000402E
-:1034B00081B200000400004081B20000040000401E
-:1034C00081B200000400004081B20000040000400E
-:1034D00081B200000400004081B2000004000040FE
-:1034E00081B200000400004081B2000004000040EE
-:1034F00081B200000400004081B2000004000040DE
-:1035000081B200000400004081B2000004000040CD
-:1035100081B200000400004081B2000004000040BD
-:1035200081B200000400004081B2000004000040AD
-:1035300081B200000400004081B20000040000409D
-:1035400081B200000400004081B20000040000408D
-:1035500081B200000400004081B20000040000407D
-:1035600081B200000400004081B20000040000406D
-:1035700081B200000400004081B20000040000405D
-:1035800081B200000400004081B20000040000404D
-:1035900081B200000400004081B20000040000403D
-:1035A00081B200000400004081B20000040000402D
-:1035B00081B200000400004081B20000040000401D
-:1035C00081B200000400004081B20000040000400D
-:1035D00081B200000400004081B2000004000040FD
-:1035E00081B200000400004081B2000004000040ED
-:1035F00081B200000400004081B2000004000040DD
-:1036000081B200000400004081B2000004000040CC
-:1036100081B200000400004081B2000004000040BC
-:1036200081B200000400004081B2000004000040AC
-:1036300081B200000400004081B20000040000409C
-:1036400081B200000400004081B20000040000408C
-:1036500081B200000400004081B20000040000407C
-:1036600081B200000400004081B20000040000406C
-:1036700081B200000400004081B20000040000405C
-:1036800081B200000400004081B20000040000404C
-:1036900081B200000400004081B20000040000403C
-:1036A00081B200000400004081B20000040000402C
-:1036B00081B200000400004081B20000040000401C
-:1036C00081B200000400004081B20000040000400C
-:1036D00081B200000400004081B2000004000040FC
-:1036E00081B200000400004081B2000004000040EC
-:1036F00081B200000400004081B2000004000040DC
-:1037000081B200000400004081B2000004000040CB
-:1037100081B200000400004081B2000004000040BB
-:1037200081B200000400004081B2000004000040AB
-:1037300081B200000400004081B20000040000409B
-:1037400081B200000400004081B20000040000408B
-:1037500081B200000400004081B20000040000407B
-:1037600081B200000400004081B20000040000406B
-:1037700081B200000400004081B20000040000405B
-:1037800081B200000400004081B20000040000404B
-:1037900081B200000400004081B20000040000403B
-:1037A00081B200000400004081B20000040000402B
-:1037B00081B200000400004081B20000040000401B
-:1037C00081B200000400004081B20000040000400B
-:1037D00081B200000400004081B2000004000040FB
-:1037E00081B200000400004081B2000004000040EB
-:1037F00081B200000400004081B2000004000040DB
-:1038000081B200000400004081B2000004000040CA
-:1038100081B200000400004081B2000004000040BA
-:1038200081B200000400004081B2000004000040AA
-:1038300081B200000400004081B20000040000409A
-:1038400081B200000400004081B20000040000408A
-:1038500081B200000400004081B20000040000407A
-:1038600081B200000400004081B20000040000406A
-:1038700081B200000400004081B20000040000405A
-:1038800081B200000400004081B20000040000404A
-:1038900081B200000400004081B20000040000403A
-:1038A00081B200000400004081B20000040000402A
-:1038B00081B200000400004081B20000040000401A
-:1038C00081B200000400004081B20000040000400A
-:1038D00081B200000400004081B2000004000040FA
-:1038E00081B200000400004081B2000004000040EA
-:1038F00081B200000400004081B2000004000040DA
-:1039000081B200000400004081B2000004000040C9
-:1039100081B200000400004081B2000004000040B9
-:1039200081B200000400004081B2000004000040A9
-:1039300081B200000400004081B200000400004099
-:1039400081B200000400004081B200000400004089
-:1039500081B200000400004081B200000400004079
-:1039600081B200000400004081B200000400004069
-:1039700081B200000400004081B200000400004059
-:1039800081B200000400004081B200000400004049
-:1039900081B200000400004081B200000400004039
-:1039A00081B200000400004081B200000400004029
-:1039B00081B200000400004081B200000400004019
-:1039C00081B200000400004081B200000400004009
-:1039D00081B200000400004081B2000004000040F9
-:1039E00081B200000400004081B2000004000040E9
-:1039F00081B200000400004081B2000004000040D9
-:103A000081B200000400004081B2000004000040C8
-:103A100081B200000400004081B2000004000040B8
-:103A200081B200000400004081B2000004000040A8
-:103A300081B200000400004081B200000400004098
-:103A400081B200000400004081B200000400004088
-:103A500081B200000400004081B200000400004078
-:103A600081B200000400004081B200000400004068
-:103A700081B200000400004081B200000400004058
-:103A800081B200000400004081B200000400004048
-:103A900081B200000400004081B200000400004038
-:103AA00081B200000400004081B200000400004028
-:103AB00081B200000400004081B200000400004018
-:103AC00081B200000400004081B200000400004008
-:103AD00081B200000400004081B2000004000040F8
-:103AE00081B200000400004081B2000004000040E8
-:103AF00081B200000400004081B2000004000040D8
-:103B000081B200000400004081B2000004000040C7
-:103B100081B200000400004081B2000004000040B7
-:103B200081B200000400004081B2000004000040A7
-:103B300081B200000400004081B200000400004097
-:103B400081B200000400004081B200000400004087
-:103B500081B200000400004081B200000400004077
-:103B600081B200000400004081B200000400004067
-:103B700081B200000400004081B200000400004057
-:103B800081B200000400004081B200000400004047
-:103B900081B200000400004081B200000400004037
-:103BA00081B200000400004081B200000400004027
-:103BB00081B200000400004081B200000400004017
-:103BC00081B200000400004081B200000400004007
-:103BD00081B200000400004081B2000004000040F7
-:103BE00081B200000400004081B2000004000040E7
-:103BF00081B200000400004081B2000004000040D7
-:103C000081B200000400004081B2000004000040C6
-:103C100081B200000400004081B2000004000040B6
-:103C200081B200000400004081B2000004000040A6
-:103C300081B200000400004081B200000400004096
-:103C400081B200000400004081B200000400004086
-:103C500081B200000400004081B200000400004076
-:103C600081B200000400004081B200000400004066
-:103C700081B200000400004081B200000400004056
-:103C800081B200000400004081B200000400004046
-:103C900081B200000400004081B200000400004036
-:103CA00081B200000400004081B200000400004026
-:103CB00081B200000400004081B200000400004016
-:103CC00081B200000400004081B200000400004006
-:103CD00081B200000400004081B2000004000040F6
-:103CE00081B200000400004081B2000004000040E6
-:103CF00081B200000400004081B2000004000040D6
-:103D000081B200000400004081B2000004000040C5
-:103D100081B200000400004081B2000004000040B5
-:103D200081B200000400004081B2000004000040A5
-:103D300081B200000400004081B200000400004095
-:103D400081B200000400004081B200000400004085
-:103D500081B20000AE9F00889AB00000AE9F00883C
-:103D60009AB00000AE9F00889AB00000AE9F008815
-:103D70009AB00000AE9F00889AB000000000008852
-:103D80009AB00100AE9F414081320000B29F2240B4
-:103D90007B6F00000000194081B20100AE9F00401F
-:103DA00081B20000000019417BB30100000000A4B3
-:103DB000C4B30100000000A1C6B3010000002FA29F
-:103DC000C8B301000814004049990100A89F004DA4
-:103DD0009ACC0100BB9F2640813200000000004CBD
-:103DE00049C10100B99FA2419B500000BF9F808044
-:103DF0008032000000005249FD9301000000004A9B
-:103E0000FD930100C29F0042CD9300000000514A83
-:103E1000FD93010000000049FD930100C29F004393
-:103E2000CB9300000000504081B20100D29F0040BF
-:103E300019990100000000F09AB001000000004450
-:103E400049D10100000040F080B201000000414D66
-:103E500080B20100CA9F00401999010000004C4047
-:103E600081B201000000004449D10100000000F0CF
-:103E70009AB001000000004D10B10000000000E207
-:103E800049B10100000000E343B10100000000E47B
-:103E900045B10100000000407BB301000000484F25
-:103EA00040B10100D29F004081B2000004000040F8
-:103EB00081B200000400004081B200000400004014
-:103EC00081B200000400004081B200000400004004
-:103ED00081B20000040000CB81C80100F4820040E0
-:103EE000F29300004082004081B200004005004093
-:103EF00081B200001806004081B20000F482004048
-:103F000081B20000AF82004081B2000038810040E1
-:103F100081B200003681004081B20000B8800040CC
-:103F200081B200001A87004081B20000AF820040D9
-:103F300081B20000F582004081B20000AB920040E7
-:103F400081B20000F095004081B200007392004001
-:103F500081B20000DF95004081B200004A9300402A
-:103F600081B20000ED92004081B20000E792004073
-:103F700081B200009A82004081B2000000008040BF
-:103F800081B201000400004081B200000400004042
-:103F900081B200000400004081B200000400004033
-:103FA00081B200000400004081B200000400004023
-:103FB00081B200000400004081B200000400004013
-:103FC00081B200000400004081B200000400004003
-:103FD00081B200000400004081B2000004000040F3
-:103FE00081B200000400004081B2000004000040E3
-:103FF00081B200000400004081B2000004000040D3
-:1040000081B200000400004081B2000004000040C2
-:0440100081B2000079
-:00000001FF
+++ /dev/null
-:10000000000200004775010004A01301001CB75B4B
-:10001000093000B65F01001C00000020183B783A50
-:10002000001CA27701001C071D017018AD7BF1FFB9
-:100030001CB37BA9AA1EB47B010C1CB57B0D061C4E
-:1000400000003064080C315A70040C315A80040CE2
-:10005000314E90040C314AA000092555C0040C31E2
-:1000600052B000E92455C004CCB3001C1CEB2D0198
-:10007000001C065632D408079D00001C7BB7020006
-:1000800010A00F31540906565EC004A0305403007E
-:10009000AC30550300CD033A001C7BB702001C6056
-:1000A0008E3154092925550300808E3154098C3036
-:1000B000910004471C01001CA00F3154090000648A
-:1000C0000004471C65C004471C5503006C30010048
-:1000D0001C4D3402001C7BB702001CA00F315409D8
-:1000E000C88337001C800100001C0000640004A0CD
-:1000F0000F305409000054C3047BFBF2001CCC33C6
-:100100000D001CB47BFD031C800E305409E0FB0580
-:10011000001C00008C0300B30F3154090000EC7088
-:10012000040000EC800400008C930061768DC30411
-:10013000C08D315409E07B00C01FA0FDC50100CC7B
-:100140003305001CD403003C1CD4D31B001CC0D3BB
-:1001500052001C00005C13048E8E3254095B805EDA
-:100160001304000000001C0000940100A00F315493
-:1001700009A00F315409C003FC7F1CA001A001009D
-:100180000000A40100A00F315409C003FC031CF5BA
-:100190007701001C267AE6051CA00F315409B30F25
-:1001A000315409B50202001CA00F3154097A7E02B5
-:1001B000001CB50202001C530F325409AF030100AA
-:1001C0001C7A0E325409B50202001C000002001C09
-:1001D000A03DAA11040000AC1104D4D352001CB5F8
-:1001E0003EB2010020FBFDFF1F802C6C0300B93ADA
-:1001F0009E0100753B02001CA71C010010DB83164A
-:10020000001CC71D21C104B93B8DC1048B2C01000A
-:100210001C6B2C35C1040000781100CB2C79C10473
-:10022000A00F315409A00F31540954D002001C49C9
-:1002300025B10100AB2C81C104A71D550300CC33AF
-:1002400009001CEB2D01001CEA2901001CA00F3144
-:100250005409AE0F315409A00F315409D407FC03DF
-:100260001C993A02001CBB3802001C003800001C1C
-:100270000000FC0104DB3B7E001CC71D01001C26A6
-:100280007AFA051C271D01001CB30F3154097A0EA0
-:10029000325409530F3254097A0E325409530F3233
-:1002A00054097A0E325409530F325409A00F3154B5
-:1002B000097A0602001C530F325409AF0301001CD7
-:1002C0007A0E325409530F3254097A0E32540953BC
-:1002D0000F3254097A0E325409530F3254097A0EF0
-:1002E000325409003D02001C0000581200CB2C01C2
-:1002F000001C753B02001CA71C010010CB2F050041
-:100300001C602C00001CC71CC90200A00F3154093E
-:10031000530702001C467ACA051C7A0E3254094063
-:10032000FA19001C0000880204467ACA051CA00FB6
-:10033000315409A00F315409A00F315409A00F31D5
-:100340005409B37B01C01F740E305409C0039C00D4
-:100350001C8000D802000000D802040000AC120586
-:10036000071D01001CD4D32B001CD4D352001C80C9
-:10037000767D13040000E00200A67B950310C79C65
-:1003800000001C802C00001C00006C0204000054C3
-:10039000C304AB2DD91205071DB5C2048B2D010076
-:1003A0001C692501001CA67B950310CB2F09001C9E
-:1003B000602C00001C0000480300530F3254094613
-:1003C0007ACA051C7A0E32540940FA19001C000042
-:1003D000100304467ACA051CB50F315409A00F3129
-:1003E000540973EC2A0304602C00001C000028034D
-:1003F00000C71C01001C0000281305071D01001C7C
-:10040000C0D722001C75567E1304602C00001CE728
-:100410001C450304E79C00001CA67B950310802C60
-:1004200000001C0000F80204000054C304B97B0162
-:10043000001C00008CC304CBAFFC071CCB2F0104B5
-:100440001CC79F80031C00008CC304CBAFFC071C9F
-:10045000CB2F0D041CC79F80031C00008CC304CB52
-:10046000AF00F81DCB2F01001DA67B95031CC79C78
-:100470008CC30400008C1305071D01001CC01DDC8B
-:10048000D308279DE40300A0EE46D400FB750914B1
-:1004900004207B06001CC01C1C04000000B0D30814
-:1004A000000000F400C0EFF2001C20255C14046082
-:1004B000B7D2030000000C1500CCB3FC031CCC33F6
-:1004C00005021C00000CC50460B70E050400000CFA
-:1004D000150400005CC404C01D98F304000068C447
-:1004E00004079D00001C1B74FDF304A67BF1031C94
-:1004F000A00F695409E07B00FC1F397F02001C0734
-:100500001D9DC304A67BAD031C000068C404E01C51
-:1005100000001C0000A40304CBAF00F81DCB2F018A
-:10052000101D0000ACC3040000AC0304CBAF00F806
-:100530001DCB2F01181DC79F000B1C0000ACC3046E
-:10054000FB7501001C071D01001CCCB3FC031CCC77
-:100550003301021C0000ACC304A01C00001CA0EE70
-:10056000A20304CBAFFC071CCB2F09041CFB7501B5
-:10057000001C0000ACC304CCB3FC031CCC33010250
-:100580001C00000CC5040000783405CCB3FC031C2F
-:10059000CC3315021C479D54C404000078440080ED
-:1005A0001D7C5404871D8D0400CE7601001CEF765F
-:1005B0009DC404A4778D2409E47601001CC476014F
-:1005C000001C0000985404D776015018F6760100FC
-:1005D0001C00000030180000000010CC3045C5049D
-:1005E000EB2D01001CEA2901001CC05901001CF57B
-:1005F0007729C504E030DC0400004CB00400204C36
-:10060000F404000000E80400CCB3FC031CCC330964
-:10061000021CEB2DB5C404CCB3FC031CCC33190273
-:100620001CEB2DB5C404CCB3FC031CCC330D021C55
-:10063000EB2DB5C404CCB3FC031CCC3311021CEB72
-:100640002DB5C404007B00801CAE7745050000007A
-:1006500004C004D38B00FC1F607A3C001C604CC0BB
-:100660000400C02F20051FE030B004008025B00436
-:1006700000B55BB10404692601001C6A2B01001C53
-:10068000801D00001CA925450500EE3000001CAFB0
-:10069000770105000000AC2404B45F014018079DF9
-:1006A000485504B77601001C967601001C471D01D1
-:1006B000001CA433016018A42F0160186477016046
-:1006C000182477016018447701001C648803001C1B
-:1006D000A43F01001CA43B01001C537B00C01CD3A1
-:1006E000CF1B001C534F02001CDACF00C01FD55790
-:1006F0000F001CD3D337001CD4530F001CE029007B
-:10070000001CF5D5B0050000009C5504775601008B
-:100710001C565301001C0000001018000004C00407
-:10072000F55501001C0000B45504775601001C5615
-:100730005301001C0000001018000004C004CB2F5F
-:10074000011810CB2F011010CB2F010810CB2F0157
-:100750000810CB2F012010CB2F012810CB2F010028
-:1007600010892561C2040000ECC204000054C304D7
-:10077000000054C304000054C304000060C204001D
-:1007800000ECC204000054C304000054C304000081
-:1007900054C304401C6CC004401C9CC004A7775583
-:1007A000C3040000C4C004271DF1C004000054C3EA
-:1007B00004000054C304000054C30400002CC60409
-:1007C00000002CC60400002CC60400002CC6040047
-:1007D000002CC60400002CC60400002CC604000037
-:1007E0002CC60400002CC60400002CC60400002CFB
-:1007F000C60400002CC60400002CC60400002CC651
-:100800000400002CC60400002CC60400002CC60402
-:1008100000002CC60400002CC60400002CC60400F6
-:10082000002CC60400002CC60400002CC6040000E6
-:100830002CC60400002CC60400002CC60400002CAA
-:10084000C60400002CC60400002CC60400002CC600
-:100850000400002CC60400002CC60400002CC604B2
-:1008600000002CC60400002CC60400002CC60400A6
-:10087000002CC60400002CC60400002CC604000096
-:100880002CC60400002CC60400002CC60400002C5A
-:10089000C60400002CC60400002CC60400002CC6B0
-:1008A0000400002CC60400002CC60400002CC60462
-:1008B00000002CC60400002CC60400002CC6040056
-:1008C000002CC60400002CC60400002CC604000046
-:1008D0002CC60400002CC60400002CC60400002C0A
-:1008E000C60400002CC60400002CC60400002CC660
-:1008F0000400002CC60400002CC60400002CC60412
-:1009000000002CC60400002CC60400002CC6040005
-:10091000002CC60400002CC60400002CC6040000F5
-:100920002CC60400002CC60400002CC60400002CB9
-:10093000C60400002CC60400002CC60400002CC60F
-:100940000400002CC60400002CC60400002CC604C1
-:1009500000002CC60400002CC60400002CC60400B5
-:10096000002CC60400002CC60400002CC6040000A5
-:100970002CC60400002CC60400002CC60400002C69
-:10098000C60400002CC60400002CC60400002CC6BF
-:100990000400002CC60400002CC60400002CC60471
-:1009A00000002CC60400002CC60400002CC6040065
-:1009B000002CC60400002CC60400002CC604000055
-:1009C0002CC60400002CC60400002CC60400002C19
-:1009D000C60400002CC60400002CC60400002CC66F
-:1009E0000400002CC60400002CC60400002CC60421
-:1009F00000002CC60400002CC60400002CC6040015
-:040A0000002CC604FC
-:00000001FF
+++ /dev/null
-:1000000002000000DCF500000C0000000000000011
-:10001000FF1F00000100000000000088824D293A07
-:1000200000000404000000800200009000000900AD
-:100030000000008002000090000009000000008025
-:100040000200009000000900000000800200009003
-:10005000000009000000008002000090000009007C
-:1000600000000080020000900000090000000080F5
-:1000700002000090000009000000008002000090D3
-:10008000FEFF0000000000AC020036320000360027
-:10009000000000A80200009200001613000000807B
-:1000A0000200009000001613000000800200009083
-:1000B00000001613000000800200009000001613DC
-:1000C0000000008002000090000016130000008075
-:1000D0000200009000002000000000D80F8028924D
-:1000E00000002100000000D80F80289200002200AC
-:1000F000000000D80F80289200002300000000D8E4
-:100100000F402B9200002400000000D80F8028929E
-:1001100000002500000000D80F8028920000260073
-:10012000000000D80F80289200002700000000D8AF
-:100130000F80289200002800000000D80F8028922D
-:1001400000002900000000D80F80289200002A003B
-:10015000000000D80F8028920000360000000098B0
-:100160001E80E99A00002C00000000D80F80289221
-:1001700000002D00000000D80F80289200002E0003
-:10018000000000D80F80289200002F00000000D847
-:100190000F80289200003000000000D40F00009271
-:1001A00000003000000000D40F400092000030003A
-:1001B000000000D40F80009200003400000000D442
-:1001C0000FC0009200003000000000D40F00019228
-:1001D00000003000000000D40F4001920000300009
-:1001E000000000D40F80019200003000000000D415
-:1001F0000FC0019200003000000000D40F000292F6
-:1002000000003000000000D40F40029200003000D7
-:10021000000000D40F80029200001613000000803E
-:100220000200009000003000000000D40F00039294
-:1002300000003000000000D40F40039200003000A6
-:10024000000000D40F80039200003000000000D4B2
-:100250000FC0039200000000000000D05F3F003498
-:10026000000016130400008042FFFCB000000000F4
-:10027000000000881280FD3A000016130000008084
-:10028000020000901613161302010080828DFDBC3F
-:1002900000000000000000881280FD3A000000000D
-:1002A000000000F803C001323800000000010084A3
-:1002B000824D281A000036000000007409400092A8
-:1002C00000004F00000000FC020000920000480007
-:1002D000000000800200009000004D00000000902F
-:1002E0000E80189200001B030000000008C020923E
-:1002F000000089000000000008002192000019039E
-:10030000000000000840219200008600000000006C
-:100310000885219000009B03000000EC02C022929F
-:1003200000009404000000800200009000005800CB
-:10033000000000FC0240189D00005100000000D0A9
-:10034000020000920000E003000000800200009024
-:100350000000161300000080020000900000000062
-:10036000000100800200007000004C00000000004E
-:1003700009C0219200004A0012010000088522B045
-:1003800018003600000000F8738A029900008E0001
-:100390006A000080020000B008008E00000000F833
-:1003A0002340019900000000000100E80200907263
-:1003B0000000161380010080B200E9B600000204BC
-:1003C0000000007C1EC0E79A08000000000000F852
-:1003D000134001390000F60300000008B801009442
-:1003E000000016130300007809401ABD0000161320
-:1003F00004010080E28097BC00000000000000A023
-:10040000E125003408000000000000F8B340013985
-:1004100000000204B20000D8020000B2000016136F
-:1004200017010080020000B000001F06001001F854
-:1004300002006E9200005B000A0100CC020000B2D4
-:1004400000007000030100FC024019BD0800020416
-:10045000000000F8A34001990000000000000084A3
-:1004600001C02F320000000000000090F1010034B4
-:10047000000000000000009401C02F320000600066
-:10048000800100801281FCB6000016130401008078
-:1004900002C02FBC02006000B00000A0F20B00B947
-:1004A000000063000401008002C0B0BC00006E00C8
-:1004B000A000008002000090000065008001008024
-:1004C000F24BD0B600006E00A00000800200009049
-:1004D00000000000A0000004FD4BD03400006B00C1
-:1004E000800100801281FCB60000C211000000D81B
-:1004F000020000D20000161304000080028092BCAB
-:1005000018000000000000F8730A03396E0036007E
-:10051000000000C00200369200009611000000D8D2
-:10052000020000D20000161304000080028092BC7A
-:1005300018003600000000F8730A03F900005B00A1
-:10054000030100FC024018BD00008500030000FC10
-:10055000024019BD000000000000009401C02F32CD
-:100560000000000000000080F101003400000000E5
-:100570000000008401C02F3200007500800100805F
-:100580001281FCB6000016130401008002C02FBCCB
-:1005900002007500B00000A0F20B00B90000780066
-:1005A0000401008002C0B0BC00008300A0000080F5
-:1005B0000200009000007A0080010080F24BD0B66B
-:1005C00000008300A00000800200009000000000F6
-:1005D000A0000004FD4BD0340000800080010080AA
-:1005E0001281FCB60000C211000000D8020000D247
-:1005F0000000161304000080028092BC1800000066
-:10060000000000F8730A033983003600000000C0C0
-:100610000200369200009611000000D8020000D2BD
-:100620000000161304000080028092BC18003600FF
-:10063000000000F8730A03F900007000030100FCD9
-:10064000024019BD00005B00030100FC024018BD20
-:1006500008000204000000F8A3400199080000000F
-:10066000000000F87340013900008E008001008016
-:10067000E20180B600008B000000008002000090C4
-:10068000080091030C0000F8534001B900008D00F0
-:1006900080010080E20180B600001613120000689D
-:1006A000020580B00000F6030000006C1FC0F69A3F
-:1006B000000000000000000008058030000000007D
-:1006C000000000FC020001320000000000000010E9
-:1006D00008803D3200000000000000CC0200003223
-:1006E00000000000000000100900363200008012F7
-:1006F00000000014090080D2000016138000008062
-:1007000062802FB60000161302010080823A80BC7E
-:100710000000161306010080923A80BC0090161368
-:1007200004010080A20D80B000001613120100BC6D
-:1007300008C021B200000000000000D40200003216
-:1007400002A0000000000000A90D80320000161376
-:100750001200005402A438B2000200800000002CF5
-:100760000800373218003600000000F8730A03F959
-:100770000000000000080004088072320000A2009F
-:100780009F00005C080072B28300A100800100801D
-:1007900082CD85B00000B6000000002CD8C1829444
-:1007A0000000B6000000002C88C1829400001613DF
-:1007B00006010080827D80BC000FAC000401008037
-:1007C00082CD85B00000AC00800000803281FCB694
-:1007D0000000161312000068020580B0000000003F
-:1007E0000000006C1FC0F63A00000000000000FC92
-:1007F000020001320000AA00040100DC43603DB3A6
-:100800000000F603000000FC020000921800000047
-:10081000000000F8738A0339A7003600000000C00A
-:10082000020036920000AE0080010080F2C085B662
-:100830000000BE000000002C98C182941000C3008C
-:1008400087000000792116B80000C30080010078FD
-:10085000390090B08300C3008700007889CD85B04F
-:100860000000B30080000080028097B60000B60050
-:100870000000002C88C182940000B5008000008038
-:1008800022C185B60000B6000000002CD8C18294B9
-:100890000000C3000000002C98C182940000BC003E
-:1008A00080010080D2C182B60000C30080010080B8
-:1008B0007280FCB600000000001800A8423D7230B3
-:1008C00000000000541809FEF2C07C300000EA006D
-:1008D00080010080F2C185B60000C50000000080E4
-:1008E00002000090000016138001008082C182B6D1
-:1008F0000000B800800000808280FCB60900C300C0
-:10090000040000B428BF17B88300C500870000ACFE
-:1009100088CD85B00000C30004000080D2E28AB018
-:1009200000000000001800A8423D72300000C50021
-:10093000541809FEF2C07C9000000000540000FC36
-:100940000200003200000000001800200700003202
-:100950008000802000000080C2CD85300000DA00D9
-:100960000B000080020000B01800000000000078BA
-:1009700079A116382000EA0004000080828D97BC1F
-:100980000000D100800100806280FCB68300D100AD
-:100990008700007889CD85B00000CD008000008000
-:1009A000028097B60000D10080010080128097B6C7
-:1009B0000000D1008001008072C185B610000000E7
-:1009C00000000078796116380000D800040100802A
-:1009D000328097BC0000EA000000002CB8C182946D
-:1009E0000000D800800100805280FCB60000D800D2
-:1009F0008000008072C185B60000D80080010080B0
-:100A000002C185B60000D80080010080D2C185B641
-:100A1000180000000000007879E116380000D800C6
-:100A200004010080328097BC0000EA000000002C26
-:100A3000C8C18294000000000000000408000432D5
-:100A40000000EA000000002CA8C182940800000009
-:100A500000000078792117380000EA0004000080C7
-:100A6000328097BC0000EA0004010080228097BC1D
-:100A70001F0000000012000889CD72300500000040
-:100A800000120000B9DC173800000000000000A8C8
-:100A9000220090370000EA008000868022247CB685
-:100AA00000000000000000780905803000001613E7
-:100AB0000201008082BA97BC000016130601008074
-:100AC00092BA97BC0000161312000068020580B0AD
-:100AD00000000000000000FC020001320000E800FD
-:100AE000040100DC43603DB30000F603000000FC9D
-:100AF0000200009218000000000000F8738A033919
-:100B0000E5003600000000C002003692020000003E
-:100B100000000010090036320000801200000014AE
-:100B2000090080D20000F10012010060084023B2E9
-:100B30003200000000000010090036320000801270
-:100B400000000014090080D20082000000000008AC
-:100B5000088036320000E100000000641F40F69A71
-:100B60000000161312000024080023B20000161320
-:100B70001200002008C023B2000016131200001853
-:100B8000088023B200000000000000FC02000132D7
-:100B90000000F800040000DC43603DB318000000D2
-:100BA000000000F8738A0339F4003600000000C02A
-:100BB0000200369200000000000000FC02008532B6
-:100BC00000000000000000D8028001320000000098
-:100BD000000000D00200003200C007011801000C24
-:100BE000A8CD3EB20000F80012000038028081B2A9
-:100BF000000000000000003C020082320000000003
-:100C0000000000300240823200000000000000348A
-:100C10000200863220800000000000080880363282
-:100C2000000000000000005C1FC0F53A000000005A
-:100C300000000078090580300000161302010080D2
-:100C400082BA97BC000016130601008092BA97BCC6
-:100C50000000F60312010068020580B000001613C0
-:100C600000000080020000900000000000180078E2
-:100C70000900723200230A0104010080A2CD82B073
-:100C800000000B0100000000090000920000161394
-:100C90009F16000029C172BC00000000001800006F
-:100CA000078081320000000000200000070082322F
-:100CB00000000000002800000780973210000000AC
-:100CC00000300000172090390000000000380000BC
-:100CD00007C0823200000000000000D8020000328D
-:100CE00000000000000000000740803200001401F6
-:100CF00080010080A2C182B600001501000800003A
-:100D000057008097050000000008000007A0043984
-:100D10000000161304100000074082B2000000001B
-:100D20000018000007008632000016131200005061
-:100D3000F2C138B418003600000000F8730A03F955
-:100D40000000161312000068020580B000000000C9
-:100D500000000078090580300000161302010080B1
-:100D600082BA97BC000016130601008092BA97BCA5
-:100D7000000016131200004802C080B20000F60303
-:100D8000CA010008E8818094000000000000008093
-:100D9000024590300000161304010080120028BCA8
-:100DA00000001613120100BC08C021B208000000A8
-:100DB000000000F89340013910000000540000FCCE
-:100DC000824D9036000016130200008042C02FBCF6
-:100DD00000002501F00100D8020000B20000000070
-:100DE000620401A802C06E3200000000000401008D
-:100DF00059C06E37000000000004017819C06E3A37
-:100E0000000000004E0401EC06BD97300000000019
-:100E1000E00000F41E40EF3A0000161304190B82A4
-:100E200002C07CBC0000000000180BCE074000325E
-:100E30000000000000000000074009320000161307
-:100E400004010080020036BC000000000008000021
-:100E500077C029370000161304100000173D90BA20
-:100E600000000000001800000780F4320000161394
-:100E700012000040F2C138B40B0000000000001066
-:100E8000090036320000801200000014098083D26D
-:100E900000000000000000FC32C02F300000000005
-:100EA0000000001008803D3218003600000000F8F5
-:100EB000730A03F900000000000000D402000032B1
-:100EC000000016130401008002802DBC0000CE013A
-:100ED0008038008022C072B600003E01120000C8B7
-:100EE000020020B2000045011201005C088020B21F
-:100EF000000016131200006002802CB218000000DF
-:100F0000000000F8738A03393B013600000000C07E
-:100F10000200369200000000000000F81F80FF3A37
-:100F200000000000000000FC320085300000A3013A
-:100F30000400008042603DB318000000000000F88B
-:100F4000738A033941013600000000C00200369266
-:100F5000080000000000000088CD85370000000078
-:100F60000000002008007232000000000008002489
-:100F700008007232000016130410006C080072B2F0
-:100F8000000000000018004C080072320000161328
-:100F900004200018080072B2000000000030002891
-:100FA00008007232000016130200008082BD82BC6D
-:100FB000000000000028003008007232000000002D
-:100FC00000000060088082320000560106000080A8
-:100FD00062A082BC000016139F3C0014288072BCE3
-:100FE00000000000000000000700063207000000BB
-:100FF00000080000774A09390000161304100000A9
-:10100000070082B200000000CA19000007408232C7
-:101010000000161312000040F2C138B400000000B6
-:10102000000000D80240003200007D010438007842
-:10103000D9C572B000005A0180010080028097B6C5
-:1010400000000000000000F882802F3400005C01E6
-:1010500080010080128097B600000000000000F8B8
-:1010600092802F34000016130401008002402DBC32
-:10107000040000000038003CB81C173800000000D5
-:101080000000003C28C0833700000000003A002C1C
-:1010900008C07232000000000000001CB8E0833A73
-:1010A00000000000CB2900200700003200007C0176
-:1010B0000400008002C081BC000000000000003479
-:1010C00078A0813E000000000000001CD8E0813CB8
-:1010D00000006A01063A0080B25C83BC0000000098
-:1010E000003A000089C17237070069012B01000432
-:1010F000790A04B900000000CB00000419419034C3
-:1011000000006D01003A002C070000920000000072
-:10111000003A002CD7E0723C000000000000000004
-:101120000900003200000000000000040900003245
-:10113000000000000000000007648332000000008F
-:1011400000080000070080320000161304100000A1
-:1011500007C086B2000000000018000007C08432FB
-:1011600000008C0104000028D8A082BC00001613E7
-:1011700009010080020000B0000000000000000033
-:10118000D820803A000077010400008072802DBCD6
-:10119000000016131200004412E438B20000780177
-:1011A000000000D812802D9A000075120000000483
-:1011B000F94190F400007A0104000018D8A081BC25
-:1011C000000062010000006CD8E0869A0000201246
-:1011D0000000004408802DF2000062010000003091
-:1011E0000800009200000000CB1900200700003228
-:1011F00007007F012B010004790A02B900000000FA
-:10120000CB00000419419034000000004D000000A4
-:10121000A7A0813E00000000000800000700803207
-:10122000000016130410000007C086B20000000082
-:101230000018000007C0843200008C010400002860
-:10124000D8A082BC0000161304010080626083BC39
-:101250000000000000000000D820803A0000890152
-:101260000400008072802DBC0000161312000044A0
-:1012700012E438B200008A01000000D812802D9AD2
-:101280000000751200000004F94190F400002012E3
-:101290000000004408802DF200007D0100000030B5
-:1012A000080000920000161380000080A2802FB674
-:1012B0000000000000000004F94190340000161303
-:1012C0001200004412E438B218003600000000F8A2
-:1012D000730A03F9000016130400008002802DBC7D
-:1012E00000000000001800040980733200000000B4
-:1012F000002800088980733700000000000000808B
-:1013000007008632410000000006008C07003632DC
-:10131000000098012908008007C085B200009B01E9
-:101320002810008C070000B200009C01001200840D
-:1013300007000092000000000010008CF7E0823AE5
-:1013400000009B0128180080074090B200009C011B
-:1013500000120084070000920000000000120084C8
-:1013600027E4823200000000000000783900853058
-:101370000000161304010080F28B97BC0000A1014D
-:101380000400008042603DB318000000000000F837
-:10139000738A03399C013600000000C002003692B7
-:1013A00000000000000000FC02008532000016135F
-:1013B0001200005C52812CB400000000000000D834
-:1013C00002800132000000000000008002003B3279
-:1013D0000840A501F0010008088036B200000000B6
-:1013E0000004013808C06E3200000000E00000F484
-:1013F0001E40EF3C0000AC010B01008C080000B265
-:101400000000A901F2010080020000B0000000000D
-:10141000000000F00E003A320000BE01E200008041
-:101420000E8083920000AC01F2010078C93B3ABC07
-:101430000000B60102010080828097BC000000001D
-:10144000000000A80200E8320000B10104000080A2
-:1014500022A22ABC0000B50104190B8202C07CBC88
-:10146000000000000000008C18C0883A0000000056
-:10147000000000A812802A3A00000000000000A826
-:1014800002BD2A300000AF0104010080E2A02ABCA6
-:101490000000BB010200008082C088BC0000000088
-:1014A000E20000080800003200000000000000A870
-:1014B000028088320000161304190B8212C07CBC13
-:1014C0000000000000180BCE070000320000F603F9
-:1014D000000000DC03000092000000000000003863
-:1014E00008802A3200000000000000F00E003A32AE
-:1014F00000000000E20000800E802A3200000000A0
-:10150000000000A8028088320000161304190B8224
-:1015100012C07CBC0000000000180BCE0700003297
-:1015200000000000000000DC030000320000161381
-:1015300004000080227AE8BA0000000000000000E9
-:1015400007808332000000000000000079C02937C6
-:101550006020000000000000890D903A00000000AB
-:10156000CA0100D812802D3A0000000000000000DF
-:101570000700013200000000000800000700903260
-:1015800000000000001000000740E83200000000EA
-:10159000001800000780E83200000000000000FC96
-:1015A000020000320000F60312010048F2C138B414
-:1015B00000001613000000800200009000001613C7
-:1015C0000401008002402DBC0000161304010080BD
-:1015D00002802DBC000016138000008072802FB6A0
-:1015E0000000000000300078088072320400000023
-:1015F00000380054A85C16380B0000000038002C9E
-:10160000A8DC1638140000000000001C884D853A44
-:101610002200000000000010090036321000801285
-:1016200000380014A99C87D90000000000000020A9
-:101630000800723200000000000800240800723226
-:10164000000000000010006C080072320000000072
-:101650000018004C08007232000016130420001815
-:10166000080072B20000000000280030080072324A
-:10167000000016139F3C0014188072BC0000E501A6
-:1016800004000080024081BC000000000000001443
-:101690001840813C000000000000000007000632F6
-:1016A0000700000000080000774A093900001613FF
-:1016B00004100000070082B200000000CA190000F8
-:1016C000074082320000161312000040F2C138B405
-:1016D00000000000000000D80240003200000000BE
-:1016E0000000006478C02937021000000000006488
-:1016F000884D863A0000000000000080080000329B
-:10170000000000000000004008000032000000005F
-:101710004D00000077A0813E00000000000800009E
-:1017200007408632000016130410000007C086B27E
-:10173000000000000018000007C084320000000212
-:101740000400001CD8E081BC0000161309010080D1
-:10175000020000B00000000000000064D860863A7B
-:101760000000F4010400008072802DBC00001613FC
-:101770001200004002C038B20000FC01000000D896
-:1017800012802D9A0000161312000040F2C138B4E6
-:1017900018003600000000F8730A03F90000FA018F
-:1017A0000401008002802DBC00001613800100801F
-:1017B000A2802FB60000F501670000F8A2802FB5C7
-:1017C00000001613120000E802C021B20000161338
-:1017D0000401008072802DBC00000000000000D8D1
-:1017E000024000320000FE0104000018D8A081BCB5
-:1017F0000000EA010000006CD8E0869A0000C910E1
-:101800000000004408802DF20000EA0100000030D2
-:10181000080000920000161312000040F2C138B414
-:1018200018003600000000F8730A03F900000602F1
-:101830000401008002802DBC00001613800100808E
-:10184000A2802FB600000102670000F8A2802FB529
-:1018500000001613120000E802C021B200001202BC
-:1018600004010080020084BC00000000000000D4DD
-:101870000240003200000000000000A42240853A2F
-:10188000040000000018004088CD743600000000FD
-:10189000000000402800843700000000000000D451
-:1018A00002000032140012020400001C880D84BCE7
-:1018B0000000161309010080020000B000000000C3
-:1018C000000000780961853A800016130601008047
-:1018D000828D97BC0000000000000064D860863A4A
-:1018E0000000FC01000000D8024000920000140239
-:1018F00004000018D8A081BC000016020000006C93
-:10190000D8E0869A0000C9100000004408802DF23B
-:10191000000000000000003008000032000000005D
-:10192000000000D40240003200000000000000A4CB
-:1019300022C0823A000000000000003CB860853CF4
-:1019400004001C028100006088CD74B60000000015
-:1019500000040028F8A0753C00001D020008007477
-:10196000088075920000000000080028F8A0753C6F
-:10197000000000000000002808A1823C00000000D8
-:10198000000000A4F2602A3A0000000000080048AD
-:1019900008007532000000000020007C08807532CD
-:1019A00009002302041A007088CD74B009000000F9
-:1019B000001A004C87CD74317F00000000000064E5
-:1019C000884D863100000000000000642840863AFF
-:1019D00023000000000000100900363200008012D1
-:1019E00000000014098082D20C00000000000010EA
-:1019F000090036320000801200000014098084D2F1
-:101A000000000000000000D802400032000000008A
-:101A1000001000000740863200000000000000D8DF
-:101A20000280003200000000001000005761863A7A
-:101A300000003002120000C8020020B20000330291
-:101A40001201005C088020B2000016131200006032
-:101A500002802CB2000040012A0100D4020000B232
-:101A600018003600CA0000F8730A03F900004101AB
-:101A7000000000F81F80FF9A00000000000000D462
-:101A800002400032080000000000000088CD8537C9
-:101A9000000000000000001CE8A1823E00000000E1
-:101AA000000000A42240853A000000000008005019
-:101AB0000780843200003A020401008072A082BCD8
-:101AC00000000000001A004CC7E174320000000062
-:101AD0000000006808E1813A00003D0290010078B2
-:101AE000F9A186BA00000000000000781980973A3A
-:101AF000000000000020005807809732000000001E
-:101B0000000000D802800032000000000000000049
-:101B10000700843200000000400800005721803A8E
-:101B2000000041021200004CF2C138B40000000075
-:101B3000000000000821803A0000000000000004BE
-:101B400008C0813200000000510000D802C00032FD
-:101B500000000000000000D402000032000000007D
-:101B6000CB1900200700003200001613020100808C
-:101B700032802DBC07004A022B010084780A02B98A
-:101B800000000000CB0000841841883400000000F1
-:101B90004D00000077A0813E00000000000800001A
-:101BA00007008032000016130410000007C086B240
-:101BB000000000000018000007C084320000161367
-:101BC0009F000028D8A082BC000068020400001C0E
-:101BD000D8E081BC0000161304010080626083BC61
-:101BE000000059022D000000D82080BA00005402E5
-:101BF000120100E802C021B218003600000000F80F
-:101C0000730A03F9000056020401008022802DBCF3
-:101C100000005902CD0100D8024084920000161342
-:101C20000401008002802DBC00001613800100809A
-:101C3000A2802FB600005302000000F8A2802F956A
-:101C400000005C020400008072802DBC00001613AE
-:101C50001200004412E238B200006602000000D810
-:101C600012802D9A0000000000000084F8418834A2
-:101C7000000016131200004412E238B218003600B9
-:101C8000000000F8730A03F90000640206010080F6
-:101C900022802DBC000016130401008002802DBCA0
-:101CA0000000161380010080A2802FB600005E02A3
-:101CB000670000F8A2802FB500005F02000000E876
-:101CC00002C02192000016130401008072802DBC16
-:101CD00000000000000000D802C000320000C9105F
-:101CE0000000004408802DF2000047020000003090
-:101CF000080000920000700280000080D2802FB6A1
-:101D000000006B02120100E802C021B21800360088
-:101D1000000000F8730A03F900006D02040100805E
-:101D200022802DBC00007002000000D80240849286
-:101D3000000016130401008002802DBC0000161361
-:101D400080010080A2802FB600006A02000000F827
-:101D5000A2802F9500000000CD000084F841883457
-:101D6000000016131200004412E238B20000000016
-:101D7000000000D40240003200000000000000A477
-:101D800022C0823A0000790204010080420086BC31
-:101D90000000000000080058074087320000780269
-:101DA0008F010074184087BA000000000000007422
-:101DB0000800003200007B0200040058F7A0869A59
-:101DC0000000000000000078F9A0863A280000001A
-:101DD00000080058878D973C00000000000000D8E4
-:101DE000024000321800000000000000B760853992
-:101DF000080000000008000087CD853700007E0243
-:101E00001200004CF2C138B400000000000000488D
-:101E100018A0843A00000000000000D40200003244
-:101E2000000000000000008057A1863A4100000039
-:101E30000006008C07003632000000000008008019
-:101E400007C08532000000000010008C074085327A
-:101E500000000000000000D80280003200001613CD
-:101E600004000058088071B20000000000000080EB
-:101E70000880003218003600000000F8730A03F9E9
-:101E800000008C020401008002802DBC00001613AB
-:101E900080010080A2802FB600008802000000F8B8
-:101EA000A2802F950000880204010080180088BCE1
-:101EB00000008F0290190058E89C85BA00000000CD
-:101EC000000000581880853A0000000000180080CB
-:101ED000078585300000940204010080420086BC22
-:101EE00000000000000000D80240003200000000A6
-:101EF00000000008898071370000950200120084FC
-:101F000027E48292000000000012008407000032E3
-:101F100000009902270000FC020085B2000099022F
-:101F20000400008042603DB318000000000000F88B
-:101F3000738A033995023600000000C00200369211
-:101F4000000016131200005C52812CB400009D02A8
-:101F500004010080028082BC000016138000008013
-:101F6000A2802FB60000A301000000D4020000925E
-:101F70000000A00204010018D8A081BC0000C91014
-:101F80000000004408802DF200002D02C70100303F
-:101F90000800009200002D02C701006CD8E0869A6C
-:101FA00008000000C60100F8934001391900000044
-:101FB00000000010090036320000801200000014FA
-:101FC000094081D200000000000000140845813063
-:101FD00000001613120100BC08C021B20000161345
-:101FE00080000080A2802FB60000F6038001808070
-:101FF000320B6AB600006A100000003C030038F2A1
-:102000000000AC020406018002C06EBC0000161382
-:10201000870601EC56E06EBA0000F3030000008072
-:102020000200009000001613870601EC56E06EBA1D
-:1020300000000000000000F842802F3408C0161392
-:1020400012000040A2CD39B218003600000000F89E
-:10205000730A03F90000161303B8000009C06EBD2F
-:10206000B202000000000088820D903A2F005E0648
-:102070000000001C080036920000161300000080CB
-:10208000020000902C005E060000001C0800369242
-:1020900000001613000000800200009000001613DC
-:1020A0000000008002000090000016130000008075
-:1020B0000200009038005E060000001C0800369206
-:1020C00039005E060000001C08003692080000007F
-:1020D000000000F89340013900001613120100BC03
-:1020E00008C021B20000161380000080A2802FB625
-:1020F0000000161380008080320B6AB600006A1060
-:102100000000003C030038F20000C102040000801F
-:10211000524082BC0000161304010080624082BC61
-:10212000000016130405018002C06EBC0000000010
-:10213000000000F842802F3408C01613120000403F
-:10214000A2CD39B218003600000000F8730A03F976
-:10215000000000000004017809C06E320000000099
-:10216000006201EC068097320900000000000010B8
-:1021700009003632000080120004011409C06ED23A
-:102180000200CB0204B8008082CD6EBC080016139A
-:1021900004B9008082CD6EBC00000000000601EC96
-:1021A000064000320000CC02B50000D8020000B2A8
-:1021B00000000000A50080A0360B6A34000000007B
-:1021C000003002E806C02C320000000000000000D1
-:1021D000078000320000000000000078A9002D37C1
-:1021E0001805010000080000C78D973A00000000A4
-:1021F0000000007899C02C3718010000000000781A
-:10220000898D973A000016130210000087BF97BA15
-:1022100000000000001800000740FE320000161306
-:1022200012000048F2C138B418003600000000F86F
-:10223000730A03F900000000001801E006000032F4
-:1022400000000000000000F882852F3000006806C2
-:102250000000001C0800369208000000000000F892
-:102260009340013900001613120100BC08C021B2CE
-:102270000000161380000080A2802FB660001613A5
-:10228000040100F8828D2FB007000000000000104C
-:10229000090036320000801200000014094081D28B
-:1022A0000000E50280008080320B6AB61700000053
-:1022B00000000010090036320000801200380014BF
-:1022C00009C06ED20000F6030000008002000090FA
-:1022D00000006A1000000038030038F20000E80235
-:1022E0000402018002C06EBC0000F303000201EC96
-:1022F00056E06E9A00000000C00301EC56E06E3A12
-:10230000000016138001008002802FB600C0161353
-:1023100012000040A28D39B218003600000000F80B
-:10232000730A03F9200016130439008082CD6EBCB5
-:102330001200000000000010090036320000801278
-:102340000030001409006ED21500000000000010DB
-:1023500009003632180000000002011489CD6E37E2
-:102360000000801200200114895B91D21B00F4024E
-:1023700038010010090036B200008012003001144C
-:1023800009006ED21800000000000010090036326B
-:102390000800000000000014790B143810008012AF
-:1023A00000500114A95B91D90000F902042801141E
-:1023B00009006EB21C00801200000010090036D225
-:1023C000000005033828001809006EB20000FD0265
-:1023D0000421010869246EBC000016130901008065
-:1023E000020000B0030068060000001C08003692DE
-:1023F0000000010302300080829B90BC00000003BB
-:102400000603018012C06EBC040068060000001CB8
-:1024100008003692050068060000001C080036928D
-:10242000000016130430008002006EB200000403A6
-:102430000603018012C06EBC0B0068060000001C81
-:10244000080036920C0068060000001C0800369256
-:10245000000008030421010869246EBC0000161363
-:1024600009010080020000B0030068060000001CA3
-:102470000800369200000C0302300080829B90BC62
-:1024800000000B030603018012C06EBC0400680646
-:102490000000001C08003692050068060000001CC1
-:1024A0000800369200000E039F31010C69246EBCB7
-:1024B000000000000000000C0900003200001203C0
-:1024C00004310004899B90BC0000110306030180C5
-:1024D00012C06EBC200068060000001C0800369286
-:1024E000210068060000001C080036920000161348
-:1024F0009F000080024090B200001503040201809A
-:1025000012C06EBC220068060000001C0800369253
-:10251000000017030401000039A490BC23006806E2
-:102520000000001C08003692000016139F00008077
-:10253000020090B2240068060000001C08003692D9
-:10254000080016130C0000F8634001B910001D03C9
-:10255000C50100CC02201598080091030C0000F87A
-:10256000434001B910000000C50100CC022015381D
-:102570000000000000000010090036320000801248
-:1025800000000014090080D200001613120100BCE4
-:1025900008C021B200006A100000003C030038F2BD
-:1025A000000000000000005C0805803000001613E9
-:1025B0000401008002402DBC0000161302010080BF
-:1025C00082FA85BC000016130601008092FA85BCD1
-:1025D0000000270336010080020000B00F006806EB
-:1025E0000000001C0800369210000000002C0200C1
-:1025F000A9DB8539000016131200005402A438B27A
-:10260000000000000008028C08C06E3200000000CC
-:10261000000C029828806E37000000000000009C2B
-:1026200038221437000032030430002808006EB24C
-:10263000000016130410006C08006EB200000000C9
-:102640000018004C08006E32000016130420001819
-:1026500008006EB200000000003C001408806E32DA
-:10266000050035030038020078E16E990000000093
-:10267000510000D80200003200000000003802784B
-:1026800009C06E32050000006808000077A1973984
-:10269000000037031201000009C021B21800360003
-:1026A000000000F8730A03F900000000545401FC14
-:1026B00002C06E3214103B0304000080A20D72B001
-:1026C0000000F3110000002809C002F20E006806A5
-:1026D0000000001C08003692000016130609008056
-:1026E00082BD72BC00004F03331500A402C072B259
-:1026F00000008C0380010080B20172B60101420328
-:1027000004290080828D74BC080A8C03042D00808B
-:10271000828D74BC000000000030007C080075321F
-:1027200000004903003800881800759C080A8C03D3
-:1027300004290080828D74BC10000000002C007CF5
-:10274000888D7537000000000030007C68DD87321E
-:10275000000048039F390088188075BC10000000F5
-:1027600000340088888D7537000049030000008818
-:102770001880889C1000000000340088689D88390B
-:1027800037000000000000100900363200008012FF
-:102790000000001409C087D23B00000000000010B8
-:1027A000090036320000801200000014098088D22F
-:1027B000000050039FF1018082DB87BC00008C0386
-:1027C000000000800200009000008C038000008068
-:1027D000B20172B60000000000080048080075321F
-:1027E00000000000001000700800753200000000BA
-:1027F000001C007438A2753700005503831B007855
-:1028000008C074B200000000000000F8C2802F343D
-:102810002F00000000000010090036320000801276
-:1028200000000014098084D2340000000000001071
-:10283000090036320000801200000014090087D21F
-:1028400000006B039F780180C2216EBC00005D0315
-:102850009F990164881B87BC00006C039F6801641A
-:10286000885B86BA000000000000006408000032A7
-:1028700000000000001600A402C072320000000038
-:10288000003C02A4B25B2A3A00000000003A027841
-:1028900009C06E3200006D0308010004E8A575BC94
-:1028A0003F000000000000100900363210008012C6
-:1028B00000040014695D80D910008C030B01001C1A
-:1028C000080036B200006B0304A10180829B84BC27
-:1028D000000068069F980180C2216EBC0000680657
-:1028E00006B10180825B87BC00008B030B01008076
-:1028F000020000B000006C0304990180C2216EBC8C
-:102900000000890302D4018092FB6EBC16006806A9
-:102910000000001C08003692170068060000001C2A
-:10292000080036921C0068060000001C0800369261
-:102930003F00000000000010090036321000801235
-:1029400000040014695D80D90000710304A10180B6
-:10295000829B84BC0000780306A80180825B80BC57
-:102960000000750304A9018002006EBC00008A0308
-:1029700004A10180829B84BC00008A0304010080C2
-:10298000124080BC140068060000001C080036924B
-:1029900000008A039FA0017829216EBC00008A03F1
-:1029A0000201008012A097BC00006B0300000080B1
-:1029B000020000900000850304000080028082BCB9
-:1029C000000016130402018002C06EBC00007E03EA
-:1029D00002000080A26080BC060068062C01001C7A
-:1029E000080036B200C0820304010080A28D2FB01F
-:1029F000060068060000001C0800369200008203F2
-:102A000004000080A26080BC0000810306030180F6
-:102A100012C06EBC090068060000001C0800369257
-:102A20000A0068060000001C0800369200008403BB
-:102A30000603018012C06EBC070068060000001C7F
-:102A400008003692080068060000001C0800369254
-:102A5000020068063801001C080036B20000880336
-:102A6000020C0280A25B80BC1F0068060000001CF4
-:102A7000080036921E0068060000001C080036920E
-:102A800000008D03000000280940009200008D0323
-:102A9000000000280980009200008D03000000283B
-:102AA00009C0009200008D03000000280900019277
-:102AB00030000000000000100900363200008012D3
-:102AC00000000014098092D20E00F3110000001CD7
-:102AD000080036F200006806000000800200009046
-:102AE000100016132A0000CC022015B80D000000BB
-:102AF00000000010090036320000801200000014AF
-:102B0000090080D200001613120100BC08C021B2D7
-:102B100000006A100000003C030038F21D00990319
-:102B20008001007809E000B800001613040100805D
-:102B3000328097BC1D0068060000001C0800369219
-:102B40000000161304010080228097BC150068065F
-:102B50000000001C08003692000000000000001C6D
-:102B6000A8052830000016130400008002C02CBC09
-:102B700000001613120100BC08C021B20000161399
-:102B800080000080A2802FB660001613040100F8B8
-:102B9000828D2FB008000000000000F8834001394A
-:102BA0003600A4030400008082CD81BC0500000033
-:102BB00000000010090036320000801200000014EE
-:102BC00009C081D20000020480018080320B6AB605
-:102BD00000006A1000000038030038F22C0068067C
-:102BE0000201008082CD81BC00005E0600000080F2
-:102BF0000200009000001613120100BC08C021B2B0
-:102C00000000AB031D41025CF80168B44100F3030E
-:102C1000000000F8A28D2F91350000000000001088
-:102C200009003632000080120000001409C085D26D
-:102C300010000000D02C0200A9DB85390000290318
-:102C40001201005402A438B20000161300000080E4
-:102C5000020000900000B40304B0008002006EBCCB
-:102C60000000B40380B9008082806EB600000013BB
-:102C70000078016008006EF230005E06D700001C8C
-:102C8000080036920000B60380010080D2812FB682
-:102C900031005E06D700001C080036920000B80321
-:102CA0008001008042812FB635005E06D700001CEF
-:102CB000080036920000C50304A8010809006EB29E
-:102CC0000000000000200208899B903E00000000E8
-:102CD00000A00108899B903A0000C5039F88010865
-:102CE000899B90BC000000000034020009C06E3DCA
-:102CF00000000000000C020409A46E370000C103AC
-:102D00000200008012A490BC000000000000000837
-:102D1000198090370000C50302010280829B90BC9D
-:102D200031005E06D700001C080036920000C50383
-:102D300004B0008002006EBC0012C50304010080D4
-:102D4000A28D2FB032005E06D700001C080036921C
-:102D50000000F303000000F872812F9500000000CE
-:102D6000000000F842802F3408C0AF02120100407A
-:102D7000A2CD39B2000016130000008002000090BE
-:102D800008000000000000F893400139080000002E
-:102D9000000000100900363200008012000000140C
-:102DA00009C081D2000016130400008002C02CBCB0
-:102DB0000000161380000080A2802FB6600016135A
-:102DC000040100F8828D2FB0000002048001808091
-:102DD000320B6AB600000000000000140840903278
-:102DE00000006A1000000038030038F22C0068066A
-:102DF0000201008082CD81BC00005E0600000080E0
-:102E00000200009008000000000000F89340013923
-:102E10000800000000000010090036321000801287
-:102E200000000014894D81D70000161304000080B3
-:102E300002C02CBC0000161380000080A2802FB6B8
-:102E400060001613040100F8828D2FB00000020408
-:102E500080018080320B6AB600006A1000000038E2
-:102E6000030038F20000DF030420018052206EBC12
-:102E70000000161309010080020000B02600680659
-:102E80000000001C08003692250068060000001CA7
-:102E9000080036920000E503040100D81E80EDBC56
-:102EA0000000E103B70000D80EC0EDB20000E4035B
-:102EB00004010080423BEEBC00000000000000E086
-:102EC0001E00EE3A00000000A70000D00E00EE3217
-:102ED00000000000007486CC02806C32000000000C
-:102EE000000000000940E7320000E9038001808013
-:102EF000320B6AB6360016131200002C82CD2EB2A9
-:102F00000000EB030401008042C52CBC0000EC0370
-:102F1000000000CC0200009200000000000000CC85
-:102F200012C02C3A0000E70304010000190090BC15
-:102F300000000000007486C806C02C32080002049D
-:102F4000000000F8C34001990000F1030400008074
-:102F5000028080BC0000161304550180B2DB2FBC38
-:102F6000000054100000002C090000F20000F603DD
-:102F700000000080020000900000F50304000080C3
-:102F8000028080BC0000161304550180B2DB2FBC08
-:102F9000000054100000002CF90100F40000FF03B1
-:102FA00004000028098080B200000000000000D862
-:102FB000020000320000811100000008080000D269
-:102FC0000000FF0304000080028092BC180036005D
-:102FD000000000F8730A03F9000002048001008079
-:102FE000A2802FB6000002041201000009C021B225
-:102FF00018000000000000F8730A033902043600CC
-:10300000000000C00200369200000204800100802F
-:10301000A2802FB6000002041201000009C021B2F4
-:1030200018003600000000F8730A03F900000000E1
-:10303000000000F80200003218003600000000F81E
-:10304000738A029910000000000000E40300363289
-:1030500002000001000000E0030037320000000021
-:10306000000000E40300363204000001000000E02C
-:1030700003003732AA040000000000E403003632E7
-:1030800009000001000000E00300373200000000EA
-:10309000000000CC0F00003200070000000000E438
-:1030A0000300363206000001000000E00300373262
-:1030B00020000000000000E4030036320800000198
-:1030C000000000E00300373200010000000000E4CF
-:1030D0000300363205000001000000E00300373233
-:1030E00030000000000000E4030036320700000159
-:1030F000000000E00300373200A00000000000E400
-:103100000300363208000008000000E003003732F8
-:1031100000000000000000A00200003200000000DB
-:10312000000000000B000032000016048B0100A01C
-:1031300012002ABA00000000000000A802000032BD
-:1031400000000000000000E0070000320000190449
-:103150000601008002802ABC000000000000009CE4
-:103160000200003200000000000000D40200003223
-:1031700000000000000000CC02000032000000004F
-:10318000000000D80200003200000000000000D063
-:103190000200003200000000000000DC02000032EB
-:1031A00000000000000000F80200003200000000F3
-:1031B000000000C80200003200000000000000C44F
-:1031C0000200003200001C048501009C12C029BAD4
-:1031D00000000000000000E4030036320B00000491
-:1031E000000000E00300373280000000000000E42F
-:1031F0000300363213000004000000E00300373201
-:1032000000200000000000E4030036320C0000043F
-:10321000000000E00300373200000000000000E47E
-:10322000030006320F000004000000E00300373204
-:1032300000040100000000E4030037320D00000428
-:10324000000000E00300373200040000000000E44A
-:103250000300363214000004000000E0030037329F
-:103260009F000000000000E4030036321500000457
-:10327000000000E00300373200000000000000E41E
-:103280000300363218000004000000E0030037326B
-:1032900060000000000000E4030036321D0000045E
-:1032A000000000E00300373200000000000000E4EE
-:1032B000030004321E000004000000E00300373267
-:1032C00070000000000000E4030036321F0000041C
-:1032D000000000E00300373200000000000000E4BE
-:1032E0000300003220000004000000E00300373239
-:1032F000A0030000000000E40300363217000004C1
-:10330000000000E00300373240000000000000E44D
-:10331000030036321B000004000000E003003732D7
-:1033200060000000000000E4030036321C000004CE
-:10333000000000E00300373200000000000000E45D
-:103340000340003216000004000000E003003732A2
-:1033500000010000000000E4030036321A000004FF
-:10336000000000E00300373220010000000000E40C
-:103370000300363219000004000000E00300373279
-:1033800080000000000000E4030036320B00000162
-:10339000000000E00300373200010000000000E4FC
-:1033A000030036320C000001000000E00300373259
-:1033B000FEFF0000000000AC0200363200000000FA
-:1033C000000000000900003218000000000000F8B2
-:1033D0000364023900004F0485010000190090BA0F
-:1033E00025260000000000E4030036320100000141
-:1033F000000000E003003732000000000000008001
-:103400000F00003200000000000000840F000032B6
-:1034100008000000000000F8F34001390800000037
-:10342000000000F8E340013908000000000000F847
-:10343000C340013908000000000000F8B340013922
-:1034400008000000000000F8A34001390800000057
-:10345000000000F89340013908000000000000F867
-:103460008340013908000000000000F87340013972
-:1034700008000000000000F8634001390800000067
-:10348000000000F85340013908000000000000F877
-:103490004340013908000000000000F833400139C2
-:1034A00008000000000000F813400139000000008F
-:1034B000000000F80380003200000000000000C897
-:1034C0003F80FC35000000000000009C020000323C
-:1034D0000000000000000000030000323E00000079
-:1034E000000000D00200363200000000000000287A
-:1034F000034038320000161304010080D20130B6B8
-:1035000000006704040100D012002DBCA0040000DC
-:10351000000000E40300363203000001000000E078
-:103520000300373200000000170000D00200003214
-:1035300000000000000000ACE100003400000000CA
-:10354000000001E00600003200000000000801E475
-:103550000600003200000000000E01EC0600003200
-:1035600000000000001001E0060000320000000032
-:10357000000000D012002D3A3E006F0402010080CE
-:10358000820D2DBC020000000000009CAE0D023236
-:1035900000000000000000A802000032300000001F
-:1035A000008886CC0700363200000000008A86CCF6
-:1035B0000700003A002400000000000409803632B1
-:1035C0000000161312000064024090B200000000D8
-:1035D000000000042940903A00007B0412000078AB
-:1035E00009C020B20000161380010080F28197B656
-:1035F0001D00161380010078E9E500B80000000006
-:103600000000007809459030000079040201008034
-:10361000C28297BC0000000000000084020000325B
-:1036200000000000000000CC030000320000810414
-:103630008E010080024028B20000BD10000000D8BA
-:10364000020000D2AA1100000000008C0E003632E9
-:1036500052000000000000740E0036321800000016
-:10366000000000E40300363209000002000000E020
-:1036700003003732FECA0000000000E403003632C7
-:103680000A000002000000E00300373200008C0452
-:1036900012010000094020B200008A0400000080EE
-:1036A0000200009000008C0412000004094020B2C7
-:1036B00000008F049F010080020090B200008E0481
-:1036C00012000008094020B202008A0404010078B8
-:1036D000092417B8060000000000007809641638B5
-:1036E00000008A0404010080028197BCFE000000F3
-:1036F0000000004403003632FE003600000000489F
-:10370000030036920000161312000000094020B298
-:103710000000950412000004094020B20000980443
-:103720009F010080020090B2000097041200000880
-:10373000094020B200000000000000B402009032F6
-:103740000000161300000080020000900000161315
-:1037500000000080020000900000161300000080AE
-:10376000020000900000161300000080020000908C
-:1037700000001613000000800200009000001613E5
-:10378000000000800200009000001613000000807E
-:10379000020000900600AA040000000C09641698BC
-:1037A0000000A10200000014084090920000DB021B
-:1037B00000000014084090923400C9030000001C6F
-:1037C000080036921200C9030000001C080036925F
-:1037D0003A00C9030000001C0800369200001613CE
-:1037E00000000080020000900000BA0200000014F7
-:1037F000084090920000DE0400000080020000906B
-:103800000000D4030000001408409092AB040000B4
-:103810000000008882CD903A0D00CD04000000FC2D
-:1038200002E416980D00DF04000000FC02E4169884
-:103830000D00E804000000FC02E416980000F60405
-:103840000000008002000090000000050000000061
-:103850000940909D000006050000008002000090D5
-:1038600000001005000000800200009000001A0512
-:10387000000000800200009000002405000000000D
-:103880000940909D00002B05000000800200009080
-:1038900000003405000000000940909D00003B0539
-:1038A00000000080020000900000AA050000000057
-:1038B000090000920000AA050000000009400092E3
-:1038C0001D07AC05000000A0020036920000BA05FA
-:1038D000000000800200009000001613000000802D
-:1038E000020000900000DE04000000DC0F40909217
-:1038F00000007E05000000800200009000008305AB
-:10390000000000D40200009210009805000000841E
-:103910001F6414980000DE04000000EC0E4090923A
-:103920000000A40500000080020000900000DE04FA
-:10393000000000D40E4090920000A7050000008017
-:103940000200009000004E06000000DC0E40909245
-:103950000000CB0500000080020000900800D005A8
-:10396000000000501F2416980000E805000000D851
-:10397000020000920D00F305000000FC02E416981E
-:103980000000F405000000D00200009200001F01BA
-:10399000000000D00200009200001513000000801B
-:1039A000020000900000161300000080020000904A
-:1039B00008000000000000F89340013900000000FA
-:1039C00000000078094590300000161306010080C1
-:1039D000228097BC3F00161304010080820D00B0C6
-:1039E0000200D104B00000A0F20B00B900000000FA
-:1039F000A00000046B4190340000020480010080AC
-:103A00000240B0B600000204040000800280B0BC96
-:103A100000000000000000D802000032000000009A
-:103A2000000000A822C02F370000000000000000A6
-:103A3000670100340042000000080000878D2A3A28
-:103A400000001613041000000700B0B200000000D0
-:103A5000001800000700D0320000161312000048C2
-:103A6000F2C138B418000000000000F8730A0339EE
-:103A700002043600000000C0020036920800020472
-:103A8000000000F8934001990000E2049F000080CC
-:103A9000020090B2000000000000000809409032CF
-:103AA000000000000000000409C0FD320200E20432
-:103AB000B00000A0F20B00B9000000000000000000
-:103AC0000B80903200000000000000000D4090329A
-:103AD00000000000A00000043B40B0310000DE0404
-:103AE0000400008002C02FBC8411DE040000008CA2
-:103AF0000E003692000016130200008002C12FBC97
-:103B000008000000000000F8934001390200EA04B8
-:103B1000B00000A0F20B00B90000ED0480010080AD
-:103B20001240B0B600000000000000043B40B0337B
-:103B30000000000000000004FD4BD0350000000034
-:103B4000000000080B00003200000000A000000C84
-:103B50001BE4B032000002040B000080020000B041
-:103B60000000F30404000080024090B21F00020431
-:103B700000000080114000990000F2040400008061
-:103B8000123EF8BA00000000000000800100F83288
-:103B900000000204000000900140F892000016139B
-:103BA000800000800281FCB60000FA049F000080C3
-:103BB000020090B2000000000000000809409032AE
-:103BC000000000000000000409C0FD3200001613D0
-:103BD00004010080428590B000000000000000E475
-:103BE0000380903209000004000000E00300373237
-:103BF00000000000000000E4034090320A000004CE
-:103C0000000000E0030037320000DE04000000C8BE
-:103C10000F81FC940000161302010080724290BCD8
-:103C20000000161306010080E24290BC000016134B
-:103C300004010078096490B500000000000000E471
-:103C40007300903C10000004000000E003003732D5
-:103C50000000DE0400000080020000900000090562
-:103C60009F000080020090B20000000000000008E9
-:103C700009409032000000000000000409C0FD323D
-:103C80000000161304010080428590B0000000007F
-:103C9000000000E40380903201000004000000E016
-:103CA0000300373200000000000000E00F80903277
-:103CB00000000000000000E4034090320200000415
-:103CC000000000E0030037320000DE04000000E4E2
-:103CD0000F409092000013059F000080020090B2F8
-:103CE00000000000000000080940903200000000C1
-:103CF0000000000409C0FD3200001613040100801A
-:103D0000428590B000000000000000E40380903283
-:103D100003000004000000E0030037320000000050
-:103D2000000000A80E80903200000000000000E4B7
-:103D30000340903204000004000000E0030037322A
-:103D40000000DE04000000AC0E40909200001D0553
-:103D50009F000080020090B20000000000000008F8
-:103D600009409032000000000000000409C0FD324C
-:103D70000000161304010080428590B0000000008E
-:103D8000000000E40380903205000004000000E021
-:103D90000300373200000000000000E403409032CE
-:103DA00006000004000000E00300373200000000BD
-:103DB000000000440F8090320000DE040000004844
-:103DC0000F4090920000161306010080824290BCC2
-:103DD0000000161304010078096490B5000028055E
-:103DE00004010080824290BC00000000000000003E
-:103DF0000900003200000000000000E403009032DF
-:103E000012000004000000E0030037320000DE046E
-:103E1000000000401F40909C00002E059F00008085
-:103E2000020090B20000000000000008094090323B
-:103E3000000000000000000409C0FD32000016135D
-:103E400004010080428590B000000000000000E402
-:103E50000380903207000004000000E003003732C6
-:103E600000000000000000E403409032080000045D
-:103E7000000000E0030037320000DE040000008094
-:103E8000020000900000161306010080824290BCE0
-:103E90000000161304010078096490B5000038058D
-:103EA00004010080824290BC00000000000000007D
-:103EB0000900003200000000000000E4030090321E
-:103EC00011000004000000E0030037320000DE04AF
-:103ED000000000FC1F40909C00003E059F000080F9
-:103EE000020090B20000000000000008094090327B
-:103EF000000000000000000409C0FD3203090000BA
-:103F0000000000280800363200005705000000308D
-:103F1000080036D20000610500000044088000D28D
-:103F20000000470504010080020084B2030E000077
-:103F300000000028080036328000570500000030DD
-:103F4000080036D2000061050000004408C000D21D
-:103F50000000470504010080020084B200004E0505
-:103F600000000044080001928002000000000000F0
-:103F7000070036328C0501000008000007003732C8
-:103F80000000161304100000078090B2000000002B
-:103F900000180000074090320000000000000048B8
-:103FA000F2C138340000161312000080020000B085
-:103FB00018003600000000F8730A03F92000000022
-:103FC000000000E40300363209000002000000E0B7
-:103FD0000300373200000000000000E40340843298
-:103FE0000A000002000000E0030037328C050100E7
-:103FF000000000A802003732A0000000000000000E
-:104000000900363200000000000000E00700003226
-:104010000000540506010000190090BC0000DE04F9
-:1040200000000080020000908C050100000000C824
-:1040300002003732800200000000003C08003632E7
-:1040400000000000000000340800013200005C05A0
-:1040500002000080D2E083BC0000000000000034B9
-:1040600008C083320000720500000080020000F0EA
-:1040700000000000000000A0078083320000000064
-:1040800000000030D820833A00005A050401003CAB
-:10409000D8E083BC00000000000100800200005056
-:1040A0000000000000000040080000320000000096
-:1040B00000000048080000328C050100000000C824
-:1040C0000200373200020000000000C8828D2C3A46
-:1040D000800000000000003C0800363200000000B4
-:1040E00000000078098078325A5A000004010080EC
-:1040F000828D975C00006A0502010048A89E84BA80
-:1041000000000000000000481880843A00006805A4
-:104110000601003C28C083BC0000000000000078BD
-:10412000098584301000000000000048888D843626
-:1041300000006F0590010048E8A584BA0000000067
-:10414000000000481880843A000000000000004889
-:104150000885843000000000040100800285845C32
-:104160000000000000010040084000520000000074
-:10417000000000E40300833201000002000000E0C0
-:10418000030037320C0078050000002CD8A082F91B
-:1041900005000002000000E00300373200000000CC
-:1041A0000000008002000030000000000001003824
-:1041B00008403E7200000000000000E403C08232AC
-:1041C00002000002000000E003003732020000029B
-:1041D000000000E003003732000000000000008013
-:1041E0000200003000007A0580000080F2403EB6F8
-:1041F0000000000000010080020000700000810546
-:104200009F000080020090B2000000000000000843
-:1042100009409032000000000000000409C0FD3297
-:1042200000000000000000840E8090320000DE04D8
-:10423000000000880E40909208000000000000F886
-:1042400093400139000087059F000080020090B272
-:10425000000000000000000809409032000000004B
-:104260000000000409C0FD32000000000000002032
-:104270000740F5320000000000080020070000326F
-:10428000000000000010002007C0F5320000000010
-:10429000001800200740F632000000000020002037
-:1042A0000780F632000000000028002007C0F63228
-:1042B00000000000003000200700F732000000007E
-:1042C000003800200780FF3200000000000000D806
-:1042D0000200003200000000000000000740093228
-:1042E000000000000008000077C02937000000002F
-:1042F000001000000780903200000000001800004D
-:10430000074090320000161312000048F2C138B482
-:1043100018003600000000F8730A03F900000000DE
-:1043200000000008C80100340000F603000000FC93
-:104330000200009200009A0580010080F24190B6D0
-:1043400000009B05000000C82F81FC9400000000C5
-:10435000000000C82F81FC35000000000000008034
-:104360000F45903000009E0502000080027EF8BCE0
-:1043700000000000000000840F00F8320000000080
-:10438000000000001940F837000000000000008421
-:104390003F40F83700000000000000840F64F83A46
-:1043A00000000000000000001900F83700000000C5
-:1043B000000000803F00F8370000DE0400000080AD
-:1043C0000F24F89A0000A60580010080F24190B603
-:1043D0000000DE04000000C83F81FC940000DE0401
-:1043E000000000C83F81FC950000A9050401008081
-:1043F000024090BC000000000000000409C0003230
-:104400000000DE04000000E41E40909C000000005C
-:10441000000000A8220090370000DE04000086C0E3
-:104420000740909208000000000000F89340013916
-:104430000D000000000000FC02E41638000000003F
-:1044400000000000090002320000B40504000080F2
-:104450000200B0B200000000000000000B000032BB
-:1044600020000000000000A0820D2A3A0000AF05E5
-:1044700004010000190090BC0000B60500000028EF
-:104480007901009400000000000000C83F80FC3467
-:1044900040800000000000280980363200008111B1
-:1044A000000000D8020000D20000020404000080D6
-:1044B000028092BC18000000000000F8730A033963
-:1044C00002043600000000C002003692EA05C00572
-:1044D00004010080824D90BC00000000000000EC50
-:1044E0000F00153200FE1F00000000F00F003732F1
-:1044F000F0FF0000000000E80F00363298050000D1
-:10450000000000F40F0036320000C605000000C8AD
-:104510004F80FC953623161304010080824D90BC19
-:1045200000000000000000EC0F80143200F81F00B3
-:10453000000000F00F003732C0FF0000000000E86C
-:104540000F00363298270000000000F40F003632CA
-:1045500000000000000000C84F80FC340400000090
-:10456000000000608F4D903A00001613600100803B
-:10457000020000B0000016137A010080020000B0B3
-:104580000000421100000080020000D00000DE04A4
-:1045900000000080020000900000CD058001008036
-:1045A000024090B600000000000000C86F80FC349C
-:1045B0000000CF0580010080124090B6000000008E
-:1045C000000000C85F80FC340000DE0400000080B2
-:1045D000020000900000D20504010080B24190B0BA
-:1045E0008007DE04000000C88F8DFC910000D40518
-:1045F00080000080124090B60000D505000000C881
-:104600007F80FC9500000000000000C87F80FC3423
-:104610000000D70580000080024090B60000D80559
-:10462000000000C88F80FC9500000000000000C85A
-:104630008F80FC340000DA0580000080424090B694
-:104640000000DB05000000C89F80FC950000000012
-:10465000000000C89F80FC340000DD058000008061
-:10466000324090B60000DE05000000C8AF80FC9527
-:1046700000000000000000C8AF80FC340000E1052D
-:1046800080000080224090B6841100000000008C61
-:104690000E0036320000E305000000C81F81FC95C3
-:1046A000AA1100000000008C0E003632000000004D
-:1046B000000000C81F81FC340000161306010080B2
-:1046C0008202F5BC00001613030000780900F5BD56
-:1046D0000000161304010080E225F5B5100000006B
-:1046E0000000004C1F2416380000DE0400000050BB
-:1046F0001F00F59C8007161304000080828DFCB01B
-:104700000000EC059F000080020090B20000000055
-:104710000000000809409032000000000000000482
-:1047200009C0FD3200000000000000001700F53A4B
-:104730008C04010000080000070037320000161347
-:1047400004100000078090B2000000000018000074
-:10475000074090320000161312000040F2C138B436
-:1047600018003600000000F8730A03F90000DE04A8
-:1047700000000080020000900000DE04000000EC59
-:10478000034090920000161304000080024090BC89
-:104790000000F505B20000D8020000B200000000E1
-:1047A000000201EC16E46E3A08000000000000F878
-:1047B0009340013900001F06171001F802006EB285
-:1047C0000600000604010080828D2FB00300000067
-:1047D000000000F8828D2F3200C061100000002818
-:1047E000098036D200000000000201EC16C06E3CC9
-:1047F00000000000001886C80600003218003600CD
-:10480000000000F8730A03F900000106000000D060
-:1048100002000092000007060419868002806CBC2A
-:10482000000016138001008012802FB600000000E7
-:104830000000000009006E3200000000C108000402
-:1048400009006E3200000000C01586780FC06C327F
-:1048500000000D068001008022802FB600000D06AA
-:10486000001886C8064000920000161380010080E0
-:1048700022802FB6000000000040000009006E32C8
-:1048800000000000C248000409006E320000000071
-:10489000C01686780FC06C3200000D0680010080C3
-:1048A00012802FB600000000001886C806000032F3
-:1048B0000040000000000028098036320000150684
-:1048C0000402018002C06EBC00006110000201EC15
-:1048D00016C06EDC000013068000008002802FB638
-:1048E00000001506810000F822802FB40000150694
-:1048F000001886C80640009200001506820000F8E5
-:1049000012802FB400000000001886C80600003294
-:10491000000016130401008002002DBC00001613D5
-:104920000401008002802DBC00000000001086C839
-:1049300006000032000000000000000007C00A323C
-:10494000003800000008000007003632000016138F
-:1049500004100000070090B20000000000180000E2
-:10496000074090320000161312000040F2C138B424
-:1049700018003600000000F8730A03F90000000078
-:10498000170100F8A2802F34000016130210868051
-:1049900072826CBC00000000001086A842806C3758
-:1049A00000002A061200703802007EB200001613C2
-:1049B0001200703C02007EB200001613120070302C
-:1049C00002007EB2000016131200703402007EB2A4
-:1049D0000000210602010080B2822ABC0000000013
-:1049E000170000D00200003206000006040100801B
-:1049F000828D2FB00000FA050403018002C06EBC56
-:104A000000003506000000800200009000002C0627
-:104A10000403018002C06EBC00003506001086C889
-:104A200046802A9600000000001086C846802A367C
-:104A3000000030068000008012802FB6030032068E
-:104A4000220000F8828D2FB200003206001886C8BE
-:104A500006000092000035068000008022802FB6FC
-:104A600000000000C20100F802802F3500C0611074
-:104A700000000028098036D200000000000201EC8E
-:104A800016C06E3C18003600000000F8730A03F9E7
-:104A900000000000001001E006802F32000000003E
-:104AA000000000A8E100003400000000A20000FCAB
-:104AB000020000320000F60380010080A2802FB6C1
-:104AC00000003B06B90100D8028001B20000F603E5
-:104AD000000000F802000092000000000000003812
-:104AE0001880F73A0000000000000038F8BF83305B
-:104AF00000003F0604010080F2BD83BC0000F60305
-:104B0000A90000F80200009200C046061801000C3F
-:104B1000A8CD3EB200004206840000741F40F7BAE0
-:104B20000000F603A90000F8020000920000000057
-:104B3000000000740F00003200C046061801000C8F
-:104B4000A8CD3EB218003600000000F8738A03F9C1
-:104B500000004306000000B00200009200000000C8
-:104B60000000007C0F80833200000000002800005D
-:104B70000700003200000000003000000700003293
-:104B800000010080003800000700373200000000FC
-:104B9000003C000C0780833200001613120000480E
-:104BA00002C080B20000161380010080A2802FB6E0
-:104BB0000000F603A9000008E80100940000540674
-:104BC00004010080A2C0EDBC52000000000000748F
-:104BD0000E00363200000000000000C00E4001321E
-:104BE000407E0500000000B40E00373200000000D7
-:104BF000000000C40E80073264005A06000000CC9A
-:104C00000E003692640016130401008082CDEDBCC4
-:104C100029000000000000740E0036320000000081
-:104C2000000000C00E400032A08C0000000000B464
-:104C30000E00363200000000000000C40EC000323A
-:104C400000000000000000CC0E80023210000000C6
-:104C5000000000E4337BEC391E000001000000E09E
-:104C60000300373200000000000000C86EC0EC37BF
-:104C70000000DE04000000D80EC0ED920000161304
-:104C800004310280A2DB2CBC00001613040100805A
-:104C9000028080B200001613021C018052C06EBC5C
-:104CA0002C0016130201008082CD81BC3F00161338
-:104CB0000200008082CD81BC3600670604000080BF
-:104CC00082CD81BC0F0000000000001009003632C8
-:104CD0002C0000000000001489CD813C10008012DF
-:104CE000001C011459E46ED96F0600000000008812
-:104CF00082CD813A0000161304010080028080B248
-:104D00000000161304310280A2DB2CBC0000161335
-:104D10000218018092C06EBC2C00161302000080A5
-:104D200082CD81BC10000000000000100900363266
-:104D3000100080120018011479E06ED96F0600008F
-:104D40000000008882CD813AAE060000001801887C
-:104D500082CD6E3AB70600000018018882CD6E3A07
-:104D6000C00600000018018882CD6E3AC906000016
-:104D70000018018882CD6E3AD20600000018018822
-:104D800082CD6E3ADB0600000018018882CD6E3AB3
-:104D9000E40600000018018882CD6E3AED0600009E
-:104DA0000018018882CD6E3AF606000000180188CE
-:104DB00082CD6E3AFF0600000018018882CD6E3A5F
-:104DC000080700000018018882CD6E3A1107000024
-:104DD0000018018882CD6E3A1A0700000018018879
-:104DE00082CD6E3A230700000018018882CD6E3A0A
-:104DF0002C0700000018018882CD6E3A35070000AC
-:104E00000018018882CD6E3A3E0700000018018824
-:104E100082CD6E3A470700000018018882CD6E3AB5
-:104E2000500700000018018882CD6E3A5907000033
-:104E30000018018882CD6E3A6207000000180188D0
-:104E400082CD6E3A6B0700000018018882CD6E3A61
-:104E5000740700000018018882CD6E3A7D070000BB
-:104E60000018018882CD6E3A86070000001801887C
-:104E700082CD6E3A8F0700000018018882CD6E3A0D
-:104E8000980700000018018882CD6E3AA107000043
-:104E90000018018882CD6E3AAA0700000018018828
-:104EA00082CD6E3AB30700000018018882CD6E3AB9
-:104EB000BC0700000018018882CD6E3AC5070000CB
-:104EC0000018018882CD6E3ACE07000000180188D4
-:104ED00082CD6E3AD70700000018018882CD6E3A65
-:104EE000E00700000018018882CD6E3AE907000053
-:104EF0000018018882CD6E3AF20700000018018880
-:104F000082CD6E3AFB0700000018018882CD6E3A10
-:104F1000040800000018018882CD6E3A0D080000D8
-:104F20000018018882CD6E3A16080000001801882A
-:104F300082CD6E3A1F0800000018018882CD6E3ABB
-:104F40000000A803000000D4020000920000EC0260
-:104F5000000000800200009028080000001C01886A
-:104F600082CD6E3A2D080000001C018882CD6E3A79
-:104F700032080000001C018882CD6E3A370800001C
-:104F8000001C018882CD6E3A3C080000001C01889C
-:104F900082CD6E3A41080000001C018882CD6E3A35
-:104FA00046080000001C018882CD6E3A4B080000C4
-:104FB000001C018882CD6E3A50080000001C018858
-:104FC00082CD6E3A55080000001C018882CD6E3AF1
-:104FD0005A080000001C018882CD6E3A5F0800006C
-:104FE000001C018882CD6E3A64080000001C018814
-:104FF00082CD6E3A69080000001C018882CD6E3AAD
-:105000006E080000001C018882CD6E3A7308000013
-:10501000001C018882CD6E3A78080000001C0188CF
-:1050200082CD6E3A0000B003000000D4020000926E
-:105030000000C603000000D4020000920000710AC4
-:10504000000000100880019200001613000000808C
-:105050000200009000001613000000800200009083
-:1050600000001613000000800200009000001613DC
-:105070000000008002000090000016130000008075
-:105080000200009000001613000000800200009053
-:1050900000001613000000800200009000001613AC
-:1050A0000000008002000090000016130000008045
-:1050B000020000900000B10A000000100880009279
-:1050C000000016130000008002000090000016137C
-:1050D0000000008002000090000016130000008015
-:1050E00002000090000016130000008002000090F3
-:1050F000000016130000008002000090000016134C
-:1051000000000080020000900000161300000080E4
-:1051100002000090000016130000008002000090C2
-:105120000000161300000080020000900000C00A7A
-:10513000000000100880009200001613000000809C
-:105140000200009000001613000000800200009092
-:105150000000130B0000001008400192000016131D
-:105160000000008002000090000016130000008084
-:105170000200009000001613000000800200009062
-:1051800000001613000000800200009000001613BB
-:10519000000000800200009000001B0B00000010C7
-:1051A00008C000920000161300000080020000906A
-:1051B00000001B0B0000001008C000920000220E2F
-:1051C000000000100840019200001613000000804B
-:1051D0000200009000001B0B0000001008C00092AD
-:1051E000000016130000008002000090000016135B
-:1051F00000000080020000900000161300000080F4
-:105200000200009000002E0B0000001008C0009269
-:1052100000001613000000800200009000002E0B1A
-:105220000000001008C000920000220E00000010D4
-:105230000840019200001613000000800200009058
-:1052400000002E0B0000001008C000920000161392
-:105250000000008002000090000016130000008093
-:105260000200009000001613000000800200009071
-:1052700000002C0B0000001008C000920000161364
-:10528000000000800200009000002C0B00000010C5
-:1052900008C000920000220E000000100840019299
-:1052A00000001613000000800200009000002C0B8C
-:1052B0000000001008C000920000161300000080DB
-:1052C0000200009000001613000000800200009011
-:1052D000000016130000008002000090000016136A
-:1052E00000000080020000900000F50B000000109C
-:1052F00008C000920000180B000000100800019286
-:105300000000130B0000001008400192000016136B
-:1053100000000080020000900000161300000080D2
-:1053200002000090000016130000008002000090B0
-:105330000000161300000080020000900000161309
-:1053400000000080020000900000161300000080A2
-:10535000020000900000EB0B00000010088000929B
-:105360000000180B00000010080001920000130B51
-:105370000000001008400192000016130000008099
-:105380000200009000001613000000800200009050
-:1053900000001613000000800200009000001613A9
-:1053A0000000008002000090000016130000008042
-:1053B0000200009000001613000000800200009020
-:1053C0000000EB0B00000010080001920000180B19
-:1053D00000000010080001920000130B00000010F4
-:1053E00008400192000016130000008002000090A7
-:1053F0000000161300000080020000900000161349
-:1054000000000080020000900000161300000080E1
-:1054100002000090000016130000008002000090BF
-:105420000000161300000080020000900000790CBC
-:1054300000000010088000920000180B000000100F
-:10544000080001920000130B0000001008400192B8
-:1054500000001613000000800200009000001613E8
-:105460000000008002000090000016130000008081
-:10547000020000900000161300000080020000905F
-:1054800000001613000000800200009000001613B8
-:1054900000000080020000900000790C0000001065
-:1054A000080001920000180B000000100800019293
-:1054B0000000130B000000100840019200001613BA
-:1054C0000000008002000090000016130000008021
-:1054D00002000090000016130000008002000090FF
-:1054E0000000161300000080020000900000161358
-:1054F000000000800200009000002D0B0000001052
-:105500000880009200001613000000800200009046
-:1055100000002D0B00000010088000920000220EF9
-:1055200000000010084001920000161300000080E7
-:10553000020000900000161300000080020000909E
-:1055400000001613000000800200009000001613F7
-:105550000000008002000090000016130000008090
-:105560000200009000002D0B0000001008000192C6
-:1055700000001613000000800200009000002D0BB8
-:1055800000000010080001920000220E0000001030
-:1055900008400192000016130000008002000090F5
-:1055A0000000161300000080020000900000161397
-:1055B0000000008002000090000016130000008030
-:1055C000020000900000161300000080020000900E
-:1055D00000001613000000800200009000007D080B
-:1055E0000000001008000192000016130000008067
-:1055F0000200009000007D080000001008400192A9
-:105600000000161300000080020000900000161336
-:1056100000000080020000900000161300000080CF
-:1056200002000090000016130000008002000090AD
-:105630000000161300000080020000900000430EDE
-:1056400000000010084001920000390E0000001018
-:10565000084001920000430E000000100840019233
-:105660000000130B00000010084001920000161308
-:1056700000000080020000900000430E00000010B7
-:105680000840019200001613000000800200009004
-:105690000000161300000080020000900000B90A0C
-:1056A00000000010084000920000B90A000000103D
-:1056B000088000920000B90A0000001008C00092A3
-:1056C0000000B90A00000010080001920000BE0AA4
-:1056D00000000010084001920000B90A000000100C
-:1056E000088001920000B90A0000001008C0019271
-:1056F0000000161300000080020000900000161346
-:1057000000000080020000900000161300000080DE
-:10571000020000900000F60C0000001008800092CB
-:105720000000F60C0000001008C000920000F60C0B
-:1057300000000010080001920000130B0000001090
-:105740000840019200001613000000800200009043
-:105750000000F60C0000001008C0019200001613B3
-:10576000000000800200009000001613000000807E
-:10577000020000900000161300000080020000905C
-:1057800000001613000000800200009000001613B5
-:10579000000000800200009000001613000000804E
-:1057A0000200009000004D0E000000100840019221
-:1057B0000000161300000080020000900000161385
-:1057C000000000800200009000001613000000801E
-:1057D00002000090000016130000008002000090FC
-:1057E0000000CB0E00000010084001920000CF0E18
-:1057F00000000010084001920000310E000000106F
-:10580000084001920000CF0E0000001008400192F5
-:1058100000007D08000000100840019200001613EF
-:1058200000000080020000900000CF0E0000001079
-:105830000840019200007E0800000010080002925B
-:1058400000001613000000800200009000001613F4
-:1058500000000080020000900000D00E0000001048
-:10586000084001920000310E000000100840019233
-:105870000000D00E000000100840019200007D08DA
-:105880000000001008400192000016130000008084
-:10589000020000900000D00E0000001008400192AD
-:1058A0000000161300000080020000900000161394
-:1058B000000000800200009000001613000000802D
-:1058C000020000900000D50E000000100880009239
-:1058D0000000D50E0000001008C000920000D50E98
-:1058E00000000010080001920000130B00000010DF
-:1058F0000840019200001613000000800200009092
-:105900000000D50E0000001008C001920000161320
-:1059100000000080020000900000161300000080CC
-:1059200002000090000016130000008002000090AA
-:105930000000161300000080020000900000161303
-:10594000000000800200009000001613000000809C
-:10595000020000900000161300000080020000907A
-:105960000000A00A0000001008400092000016137A
-:10597000000000800200009000001613000000806C
-:10598000020000900000161300000080020000904A
-:105990000000161300000080020000900000EA0ED4
-:1059A00000000010088000920000EA0E00000010C5
-:1059B00008C000920000EA0E0000001008000192EA
-:1059C0000000130B000000100840019200001613A5
-:1059D00000000080020000900000EA0E00000010AD
-:1059E00008C0019200001613000000800200009021
-:1059F0000000161300000080020000900000161343
-:105A000000000080020000900000030F0000001062
-:105A1000088000920000030F0000001008C00092F0
-:105A20000000030F00000010080001920000130B9B
-:105A300000000010084001920000161300000080D2
-:105A4000020000900000030F0000001008C0019247
-:105A500000001613000000800200009000007D0886
-:105A600000000010080000920000161300000080E3
-:105A70000200009000007D080000001008800092E5
-:105A80000000150F0000001008C0009200007D0803
-:105A9000000000100800019200007D0800000010C6
-:105AA00008400192000016130000008002000090E0
-:105AB0000000161300000080020000900000161382
-:105AC000000000800200009000001613000000801B
-:105AD00002000090000016130000008002000090F9
-:105AE00000007D0800000010088000920000260FD2
-:105AF000000000100880009200007D0800000010E7
-:105B00000800019200007D0800000010084001928A
-:105B10000000161300000080020000900000161321
-:105B200000000080020000900000161300000080BA
-:105B30000200009000001613000000800200009098
-:105B400000001613000000800200009000007D0895
-:105B500000000010088000920000260F00000010D6
-:105B60000800019200007D0800000010080001926A
-:105B700000007D080000001008400192000016138C
-:105B8000000000800200009000001613000000805A
-:105B90000200009000001613000000800200009038
-:105BA0000000161300000080020000900000161391
-:105BB000000000800200009000001613000000802A
-:105BC0000200009000007D08000000100880009294
-:105BD00000001613000000800200009000007D0805
-:105BE0000000001008400192000016130000008021
-:105BF00002000090000016130000008002000090D8
-:105C00000000161300000080020000900000161330
-:105C100000000080020000900000161300000080C9
-:105C2000020000900000FA0E0000001008800092B0
-:105C30000000FA0E0000001008C000920000FA0EEA
-:105C400000000010080001920000130B000000107B
-:105C5000084001920000161300000080020000902E
-:105C60000000FA0E0000001008C001920000161398
-:105C70000000008002000090000016130000008069
-:105C80000200009000001613000000800200009047
-:105C900000001613000000800200009000001613A0
-:105CA0000000008002000090000016130000008039
-:105CB000020000900000390F00000010080002925E
-:105CC0000000161300000080020000900000161370
-:105CD0000000008002000090000016130000008009
-:105CE00002000090000016130000008002000090E7
-:105CF0000000161300000080020000900000C00A9F
-:105D00000000001008C0019200001613000000807F
-:105D100002000090000016130000008002000090B6
-:105D20000000130B00000010084001920000161341
-:105D300000000080020000900000010B0000001035
-:105D400008C00192000016130000008002000090BD
-:105D500000001613000000800200009000001613DF
-:105D600000000080020000900000C00A0000001047
-:105D700008800092000016130000008002000090CE
-:105D80000000161300000080020000900000130BBA
-:105D9000000000100840019200001613000000806F
-:105DA000020000900000010B0000001008C00192EA
-:105DB000000016130000008002000090000016137F
-:105DC0000000008002000090000016130000008018
-:105DD000020000900000260D0000001008800092D4
-:105DE0000000161300000080020000900000260D45
-:105DF00000000010088000920000220E0000001039
-:105E0000084001920000161300000080020000907C
-:105E10000000260D000000100880009200001613FC
-:105E200000000080020000900000161300000080B7
-:105E30000200009000001613000000800200009095
-:105E40000000260D0000001008000192000016134B
-:105E500000000080020000900000260D00000010ED
-:105E6000080001920000220E00000010084001927C
-:105E70000000161300000080020000900000260DB4
-:105E800000000010080001920000161300000080BE
-:105E90000200009000001613000000800200009035
-:105EA0000000161300000080020000900000260D84
-:105EB000000000100800019200001613000000808E
-:105EC000020000900000260D000000100800019262
-:105ED0000000220E0000001008400192000016137E
-:105EE00000000080020000900000260D000000105D
-:105EF00008000192000016130000008002000090CC
-:105F0000000016130000008002000090000016132D
-:105F100000000080020000900000260D000000102C
-:105F2000088000920000161300000080020000901C
-:105F30000000260D00000010088000920000220ED4
-:105F400000000010084001920000161300000080BD
-:105F5000020000900000260D000000100880009252
-:105F600000001613000000800200009000001613CD
-:105F70000000008002000090000016130000008066
-:105F80000200009000001613000000800200009044
-:105F90000000161300000080020000900000260D93
-:105FA0000000001008C001920000220E0000001046
-:105FB00008400192000016130000008002000090CB
-:105FC0000000260D0000001008C00192000016130A
-:105FD0000000008002000090000016130000008006
-:105FE00002000090000016130000008002000090E4
-:105FF0000000AB0D00000010088000920000161396
-:1060000000000080020000900000161300000080D5
-:106010000200009000007D0800000010084001927E
-:106020000000161300000080020000900000AB0D7D
-:10603000000000100880009200001613000000808D
-:106040000200009000001613000000800200009083
-:106050000000161300000080020000900000AB0D4D
-:10606000000000100880009200001613000000805D
-:106070000200009000001613000000800200009053
-:1060800000007D0800000010084001920000161377
-:1060900000000080020000900000AB0D0000001026
-:1060A00008C001920000161300000080020000905A
-:1060B000000016130000008002000090000016137C
-:1060C0000000008002000090000016130000008015
-:1060D00002000090000016130000008002000090F3
-:1060E00000001613000000800200009000007D08F0
-:1060F000000000100840019200001613000000800C
-:10610000020000900000B50D0000001008C00192D0
-:10611000000016130000008002000090000016131B
-:1061200000000080020000900000161300000080B4
-:106130000200009000001613000000800200009092
-:1061400000001613000000800200009000001613EB
-:10615000000000800200009000007D080000001098
-:106160000840019200001613000000800200009019
-:106170000000B50D0000001008800092000016130A
-:106180000000008002000090000016130000008054
-:106190000200009000001613000000800200009032
-:1061A000000016130000008002000090000016138B
-:1061B0000000008002000090000016130000008024
-:1061C000020000900000B30E000000100840019291
-:1061D000000016130000008002000090000016135B
-:1061E00000000080020000900000161300000080F4
-:1061F0000200009000008608000000100840009295
-:10620000000016130000008002000090000016132A
-:1062100000000080020000900000161300000080C3
-:1062200002000090000016130000008002000090A1
-:106230000000161300000080020000900000DD083E
-:10624000000000100880009200001613000000807B
-:106250000200009000001613000000800200009071
-:106260000000C6090000001008000192000016138B
-:10627000000000800200009000008508000000106F
-:10628000080001920000D0090000001008000192EF
-:106290000000D00900000010080001920000D009A1
-:1062A000000000100800019200001613000000809A
-:1062B0000200009000001613000000800200009011
-:1062C0000000EF0800000010088000920000161384
-:1062D000000000800200009000008508000000100F
-:1062E00008000192000016130000008002000090D8
-:1062F000000016130000008002000090000000095A
-:1063000000000010088000920000C4090000001086
-:10631000088000920000850800000010080001922B
-:106320000000161300000080020000900000E60943
-:1063300000000010084000920000E6090000001074
-:10634000088000920000E6090000001008C00092DA
-:1063500000008508000000100800019200001613DC
-:106360000000008002000090000016130000008072
-:106370000200009000000C0A0000001008C000920B
-:106380000000161300000080020000900000850845
-:1063900000000010080001920000161300000080A9
-:1063A0000200009000001613000000800200009020
-:1063B00000000F0A000000100800019200000F0A00
-:1063C0000000001008000192000085080000001085
-:1063D00008000192000016130000008002000090E7
-:1063E0000000161300000080020000900000110A57
-:1063F00000000010088000920000110A0000001048
-:1064000008C00092000085080000001008000192FA
-:1064100000001613000000800200009000008508B4
-:1064200000000010084000920000DC09000000108D
-:10643000088000920000DC090000001008C00092F3
-:106440000000850800000010080001920000850887
-:1064500000000010080000920000850800000010F5
-:10646000084000920000250A0000001008800092F9
-:106470000000250A0000001008C0009200008508F6
-:1064800000000010080001920000161300000080B8
-:10649000020000900000161300000080020000902F
-:1064A0000000600A000000100880009200008508CB
-:1064B0000000001008C000920000850800000010D5
-:1064C00008000192000016130000008002000090F6
-:1064D00000001613000000800200009000003F0A38
-:1064E00000000010088000920000161300000080D9
-:1064F00002000090000085080000001008000192D2
-:106500000000161300000080020000900000161327
-:1065100000000080020000900000EC080000001065
-:106520000880009200001613000000800200009016
-:1065300000008508000000100800019200001613FA
-:106540000000008002000090000016130000008090
-:10655000020000900000540A000000100880009221
-:106560000000540A0000001008C0009200008508D6
-:1065700000000010080001920000161300000080C7
-:10658000020000900000161300000080020000903E
-:1065900000001C0A000000100880009200001C0A85
-:1065A0000000001008C000920000850800000010E4
-:1065B0000800019200001613000000800200009005
-:1065C00000001613000000800200009000006D0A19
-:1065D000000000100880009200006D0A000000100A
-:1065E00008C0009200008508000000100800019219
-:1065F0000800F303001801E8762081990800EF03F2
-:10660000001801E87620819900004B1200000080FC
-:10661000020000F0080082081D1901E8762081B907
-:106620000000F303000000F862812F950000F303DF
-:106630008000008002812FB62A0016131200002C61
-:1066400082CD2EB20000F303000000F802812F94E7
-:106650000800F303001C01E876208199000016135E
-:10666000800F018002C06EB600000000000000D85C
-:106670000200003200000000000E01EC06C06E3582
-:106680005400000000000000070036320000000047
-:10669000000000BCA8002D37B40401000008000071
-:1066A000C7CD8B3A000000000000007899C02C375D
-:1066B000B400000000000078898D973A000016139E
-:1066C0000210000087BF97BA000000000018000009
-:1066D0000740FE320000161312000040F2C138B429
-:1066E000000000000090007809006E3200001613D0
-:1066F00004A0000009806EB20000950804A5000403
-:1067000009806EB200000000000000040900903211
-:106710000000161302010080026490BC000098087B
-:1067200004010004096490BC0000000000000004A3
-:1067300009400032080000006E3402E81624903947
-:1067400000009908B71002E0068097B200009C088C
-:1067500080000080F280FCB600009D08000000C8A8
-:10676000FF80FC9400009E089F990080821BEEBC75
-:1067700000000000009800E00E006E3200000000F3
-:10678000A70000800200003018003600000000F86A
-:10679000730A03F9000000000010021C09006E32A9
-:1067A0004000A3080601008082CD91BC00C0A4086F
-:1067B000001802E00680369200E00000001802E0B7
-:1067C00006803632000000000000002009800332FD
-:1067D0000000A70880D7018032C06EB6000000001C
-:1067E000000000204900923A0000000000980118C3
-:1067F00009006E3200000000000A022409C06E3257
-:106800000000000000C0012809806E320000B508B9
-:10681000800E018012C06EB602000000003C02EC47
-:106820000600363200000000000000004901923AE4
-:106830000000B10880D6018042C06EB60082000020
-:10684000001002E0A6CD913200A00000002C02E86A
-:10685000060036322800BF08003A02EC06003692E5
-:1068600000000000D301001CD9C191340082000057
-:10687000001002E0A6CD913200A00000002C02E83A
-:10688000060036323400BF08003A02EC06003692A9
-:1068900004000000003C02EC060036322800000034
-:1068A00000000000890D923A0000BB0880D60180EC
-:1068B00042C06EB600860000001002E0A6CD913204
-:1068C00004A00000002C02E8060036321400BF08C5
-:1068D000003A02EC0600369200000000D301001CD2
-:1068E000D9C1913400860000001002E0A6CD91329B
-:1068F00004A00000002C02E8060036322000BF0889
-:10690000003A02EC0600369212000000003802EC59
-:1069100086CD913A08000000002802E886249039CC
-:1069200000000000002002E0962414370000000060
-:10693000004001E0068091320000C508040100809B
-:10694000028092BC0000000000C001E0060000329E
-:1069500000000000003000E00600003200000000EF
-:1069600000B000E00600003220000000000000003F
-:10697000070036320000000000000078A9002D3723
-:106980000005010000080000C78D973A00000000D4
-:106990000000007899C02C3700010000000000784A
-:1069A000898D973A000016130210000087BF97BA2E
-:1069B00000000000001800000740FE32000016131F
-:1069C00012000048F2C138B40000D20880D7012C70
-:1069D00009C06EB200000000DAD701EC06C06E35C7
-:1069E00000000000005A01EC0640ED32AE0000004D
-:1069F000000000781900363AAF0016130401008039
-:106A0000828D97BC00000000005C01E806808B329C
-:106A10000000D7088001008062C092B6000000002C
-:106A2000000000F882812F3418003600000000F8C2
-:106A3000730A03F9000000000004013808C06E3238
-:106A40000000161304C9018002806EBC0000000023
-:106A5000006201EC06808332010085081201002CDF
-:106A600082CD2EB2000016130000008002000090BC
-:106A700000000000005401FC02C06E320000000063
-:106A8000000000D80280013200C0E3081801000CA9
-:106A9000A8CD3EB2208000000000000808803632F9
-:106AA0002D00EF031201002C82CD2EB20000161330
-:106AB0000000008002000090000000000062013829
-:106AC00008C06E320008008000000028090037323C
-:106AD0000060EB1100000008088036F20000161379
-:106AE000870601EC16C06EBC000085080B00008014
-:106AF000020000B0000085088000008072812FB67F
-:106B000000000000000000F872812F343D0085086D
-:106B10001201002C82CD2EB200001613000000805E
-:106B200002000090000016130407018012C06EBC22
-:106B30000000161380000080B2812FB60000EF081D
-:106B4000000000F8B2812F940000161304A0001872
-:106B500008006EB2000016130406018002C06EBC6D
-:106B600000009E1200000080020000F000000013F0
-:106B70000078016008006EF20000F508120100C8FC
-:106B8000020020B20000F80800000080020000901F
-:106B9000000005091201005C088020B20000F8081E
-:106BA0001201006002802CB2000016130000008069
-:106BB000020000900000FA0804000080024080BC3F
-:106BC00000000000000000F81F80FF3A0000FD08F0
-:106BD00080010080A2802FB618003600CA0000F89D
-:106BE000730A03F9000016130401008002802DBC13
-:106BF000000085088000008072812FB63D001613CA
-:106C00001200002C82CD2EB200008508000000F892
-:106C100072812F94000016130406018002C06EBC1E
-:106C20000000000000BC001408806E320000F8086C
-:106C3000120000C8020020B20000F6081200005C3A
-:106C4000088020B20000161304A0001808006EB2DD
-:106C5000000000000000007879613832000016134F
-:106C60001218024CE2256EB20000161304010080D7
-:106C700002402DBC080000000010020078E16E39CF
-:106C8000000000000018002007000032070000008C
-:106C90000000003878CAE939000016130400003CEF
-:106CA000084080B2000000000090006C08006E32C6
-:106CB000000000000098004C08006E32000016131F
-:106CC0000400008032E186B200000000510000D8CC
-:106CD00002000032000000004D00000067E0833E2B
-:106CE00000000000000800000700803200000000E3
-:106CF0000010000007C086320000000000180000ED
-:106D000007C084320000000000000018D8A0813CB9
-:106D10000000840904B000E0D6206EBC0000161309
-:106D200009010080020000B0000043090400003C9B
-:106D3000D8E083BC0000161304010080028081BCEF
-:106D4000000024098000008092802FB600001C09FA
-:106D50001201000009C021B218003600000000F83E
-:106D6000730A03F91D0000000000007809A4173819
-:106D70000000210904010080128097BC0000161356
-:106D800080010080A2802FB600001B09670000F878
-:106D9000A2802FB500001C090000000009C021924C
-:106DA0000000230904000080228097BC0000161315
-:106DB00004010080328097BC00000000C90100D8A7
-:106DC00002408432000027090400008072802DBC3C
-:106DD0000000161312000044E2E038B2000034094B
-:106DE000510000D812802D9A0000000000000078A9
-:106DF000F98183340000161312000044E2E538B232
-:106E000000002C098000008082802FB60000F7115E
-:106E100000A0015008006EF20000000000F801E040
-:106E20000600853200002E09120100E802C021B2DE
-:106E300018003600000000F8730A03F90000320958
-:106E40000401008002802DBC000016138001008028
-:106E5000A2802FB600002D09670000F8A2802FB590
-:106E600000001613120000E802C021B20000161341
-:106E70000401008072802DBC00000000510000D889
-:106E800002000032000039092A010000D82080BA2F
-:106E9000000038091201000009C021B218003600B4
-:106EA000000000F8730A03F900000000000000D899
-:106EB000024084321D0016130400008002A417B89B
-:106EC00000000000CAE0006C08006E320000000004
-:106ED00000E8004C08006E320000161304F00018A1
-:106EE00008006EB2000000000000003818818335F1
-:106EF0000000100904B00080829B81BC00001613C2
-:106F00000D010080020000B0000016139F00001465
-:106F1000184081BC00000000CA0100F842802F35F3
-:106F200008A0100912010040A2CD39B200001613CA
-:106F3000000000800200009000004E09293402B8D1
-:106F400008806EB2000046091201000009C021B29B
-:106F500018003600000000F8730A03F91D00000055
-:106F60000000007809A4173800004B0904010080D4
-:106F7000128097BC0000161380010080A2802FB6FB
-:106F800000004509670000F8A2802FB500004609FF
-:106F90000000000009C0219200004D09040000809B
-:106FA000228097BC0000161304010080328097BC39
-:106FB00000000000C90100D8024084320000000037
-:106FC00000000078F9818334000016131200004499
-:106FD000E2E538B2000056092800006CD8E086BA15
-:106FE0000000F61100A0015008006EF200005609E2
-:106FF0001DF801E0060085B20000560980000080FF
-:1070000002812FB62A0016131200002C82CD2EB258
-:1070100000000000000000F802812F3400005C092D
-:1070200004A000E0068081B20000000000BC00E87F
-:107030000640813200000000009000E006C0863269
-:1070400000000000009800E006C084320000161323
-:107050000400008032E186B2000070090000008068
-:10706000020000900000620980010080A2802FB61B
-:1070700000005F091201000009C021B218003600AB
-:10708000000000F8730A03F91D0062090401008082
-:1070900002A417B80000161380000080E2802FB60B
-:1070A00000005E09000000F8E2802F94000000005C
-:1070B00000E0006C08006E3200000000CAE8004CDE
-:1070C00008006E32000016130400008032E186B220
-:1070D0000000161304F0001808006EB200006B09DF
-:1070E00004B00080829B81BC000016130D0100805B
-:1070F000020000B0000016139F000014184081BC6D
-:1071000000000000CA0100F842802F3508A01613C5
-:1071100012000040A2CD39B20000000000A000E043
-:107120000680813200000000009800E006C0843232
-:1071300000000000009000E006C086320000161338
-:107140000400008032E186B20000000000BC00E8CC
-:1071500006408132000076092A5D01E806808BB284
-:10716000000073091201000009C021B218003600A6
-:10717000000000F8730A03F91D007609040100807D
-:1071800002A417B80000161380000080E2802FB61A
-:1071900000007209000000F8E2802F9410247909A1
-:1071A000370000F8A28D2FB13D0016131200002CFD
-:1071B00082CD2EB200000000000000F872812F3452
-:1071C00008000000CA1C01E8762081390000541034
-:1071D0000000002CF90100F400007F09800000800D
-:1071E000E2802FB600007E091201000009C021B222
-:1071F00018003600000000F8730A03F91D0016138A
-:107200000401008002A417B800001613800100805A
-:1072100082802FB60000161304010080C20003BC58
-:10722000100000000018008067A173393000F603D9
-:107230001201005CA28D2CB2000016130000008029
-:107240000200009000008A098000008092802FB622
-:1072500018003600000000F8730A03F91D00161329
-:107260000400007809A417B8000089090400008010
-:10727000228097BC0000161304010080328097BC66
-:1072800000000000C90100D802408432000016133B
-:1072900004010080D2E083BC000016132A000078AD
-:1072A000F98183B40000161312000044E2E538B2FD
-:1072B0000000641100000030030038F20000920961
-:1072C0001D000038188183B50000920980000080FD
-:1072D00002812FB62A0016131200002C82CD2EB286
-:1072E00000000000000000F802812F340000161397
-:1072F000870601EC16C06EBC000096090B000080EA
-:10730000020000B000000000CA0100F842802F34E3
-:1073100008C0161312000040A2CD39B2000099092E
-:107320008000008082802FB60000F71100A001507D
-:1073300008006EF20000000000F801E0060085324F
-:1073400000009B091201000009C021B2180036009C
-:10735000000000F8730A03F90000BD092A3502B8DD
-:1073600008806EB200009E091201000009C021B21F
-:1073700018003600000000F8730A03F9000000004E
-:10738000000000F8A2802F350000B509040000803D
-:10739000026180BC0000AD0980B8000009C06EB277
-:1073A0004000A50904000080820D90BC80001613E7
-:1073B00004010080820D90BC0000A50902B000808D
-:1073C000821B84BC0000AD09000000F8B2812F943C
-:1073D000000016130407018012C06EBC00001613D3
-:1073E00080000080B2812FB60000161380D6018085
-:1073F00052C06EB60000000000D601EC56C06E34DC
-:1074000000000000000000601800863A0000000044
-:1074100000000080B701783400000000007801E02F
-:10742000060086324000BD0904000080820D90BC39
-:107430000000161304A0001808006EB200009E128F
-:1074400000000000D82080FA000016130600003C5F
-:10745000182084BC0000161304B0003C88DB83BEF7
-:107460000000161380010080C20178B60000000001
-:1074700000000080F720783A00000000587801E012
-:10748000F620863A00000C0900000004F860809A9B
-:107490000000B80980B9000009C06EB22F00BD0914
-:1074A0001201002C82CD2EB20000161300000080C5
-:1074B000020000904000BA0904010080820D90BCD7
-:1074C0003800BC09000000780900369280001613CD
-:1074D00004010080820D90BC39000000000000789B
-:1074E00009003632000016131200002CE2E52EB21D
-:1074F000000016138001008082802FB60000161352
-:1075000004010080C20003BC1000000000180080CD
-:1075100067A1733900000000005C01E806808B322F
-:1075200010240000000000F8A28D2F3130008508E3
-:107530001201005CA28D2CB2000016130000008026
-:10754000020000900000161380010080C2812FB657
-:1075500000000009000000F8C2812F950000000023
-:10756000005401FC02C06E3200000000000000D890
-:107570000280013200C0CC091801000CA8CD3EB237
-:107580002080000000000008088036322D00EF0344
-:107590001201002C82CD2EB20000161300000080D4
-:1075A00002000090000000000062013808C06E3246
-:1075B0000008008000000028090037320060EB114D
-:1075C00000000008088036F20000DA0900000080A0
-:1075D000020000900000D20980000080C2812FB616
-:1075E0000000D50900D001E806000092000000006C
-:1075F000000000F8C2812F350000D50904D10180B8
-:1076000002806EBC0000000000D601EC26C06E3483
-:107610000000D7098000008092812FB60000DA09AF
-:1076200000C801E80600009200000000000000F819
-:1076300092812F350000DA0904C9018002806EBCF6
-:107640000000000000D601EC16C06E341100850861
-:107650001201002C82CD2EB2000016130000008013
-:1076600002000090000085089A0100F842812FB5C1
-:107670000000E309120100C8020020B2000000006F
-:10768000005C01EC0640003200008508370000F87D
-:1076900042812FB400000000000000F872812F34F6
-:1076A0003D0085081201002C82CD2EB20000161379
-:1076B00000000080020000900000EE091201005C52
-:1076C000088020B20000DE091201006002802CB2A6
-:1076D0000000161300000080020000900000EB097B
-:1076E000120100C8020020B200008508370000F82F
-:1076F000D2812FB400000000000000F872812F3406
-:107700003D0085081201002C82CD2EB20000161318
-:1077100000000080020000900000EE091201005CF1
-:10772000088020B20000E7091201006002802CB23C
-:10773000000016130000008002000090000000000E
-:107740000000007879613832000016131218024CDC
-:10775000E2256EB200000000003402B808806E32EC
-:107760000000000000A0015008006E320000000080
-:107770000078016008006E320000F5099D110234A6
-:1077800009006EB20000000000F0018808006E32AF
-:107790000000121200A8010809006EF200000000AB
-:1077A000D4F801E00600853200000000DA5C01E850
-:1077B00006808B3200006411DD000030030038F2D7
-:1077C0000000FB092329020409806EB23E00161353
-:1077D0001200002C82CD2EB20800FF091D1C01E80A
-:1077E000762081B90000FF098000008002812FB659
-:1077F0002A0016131200002C82CD2EB200000000C9
-:10780000000000F802812F34000054100000002C0A
-:10781000F90100F40000030A9D010080074093B2C3
-:107820000000000000300080078088320000000067
-:10783000003800800700EE320000000000080080E1
-:1078400007C0853200000000001000800740903221
-:107850001000000000180080878D853700000000B0
-:107860000020008007008632000000000028008011
-:107870000700853200000A0A1201000009C021B287
-:1078800018003600000000F8730A03F93000F60310
-:107890001201005CA28D2CB20000161300000080C3
-:1078A000020000900012161304010080A28D2FB078
-:1078B0000000000000CC017809806E3200008508CD
-:1078C000DCD101E806809792130085081201002C94
-:1078D00082CD2EB20000161300000080020000903E
-:1078E0000000E30F00000018094081F20000C70FFC
-:1078F00000A8012009006EF20000850880010080C8
-:10790000F2802FB60000190A120100C8020020B24E
-:10791000000085088000008072812FB60000000002
-:10792000000000F872812F343D0085081201002C00
-:1079300082CD2EB2000016130000008002000090DD
-:107940000000EE091201005C088020B20000150A58
-:107950001201006002802CB20000161300000080AB
-:107960000200009000008508350100F812812FB553
-:1079700000000000000000D802800132000000007A
-:10798000005401FC02C06E3200C0230A1801000C32
-:10799000A8CD3EB220800000D10100080880363218
-:1079A0003B00F3031201002C82CD2EB2000016130F
-:1079B00000000080020000900000E2110098012801
-:1079C00009006EF2000085080000008002000090AF
-:1079D00000002F0A80010080A2812FB600002F0A2C
-:1079E0008000008042812FB61F00000000000010C0
-:1079F00009003632000080120000001409802FD2E6
-:107A00003C00000000000010090036320000801227
-:107A10000000001409803CD200002F0A085B01EC32
-:107A200006FB6EBC00000000005A01EC06000032AC
-:107A300000002F0A370000F842812FB43D000000FB
-:107A4000D701002C82CD2E320000360A8001008042
-:107A500092812FB60000161380000080C2812FB6DD
-:107A600000003D0A08C901E806BB6EBC000000002A
-:107A700000C801E806000032330016131200002C83
-:107A800082CD2EB20000F31100000028098001F21F
-:107A900000008508000000800200009000003D0A00
-:107AA00080010080C2812FB6000016138000008084
-:107AB00092812FB600003D0A08D101E806BB6EBCDA
-:107AC0000000000000D001E8060000323300161369
-:107AD0001200002C82CD2EB20000F311000000280D
-:107AE00009C001F20000850800000080020000903B
-:107AF0000000850880010080F2812FB618008508FB
-:107B00000000002C82CD2E92000016130407018085
-:107B100012C06EBC0000430A120000C8020020B26E
-:107B20000000460A1201005C088020B20000161313
-:107B30001200006002802CB200000000000000F87B
-:107B40001F80FF3A0000F3031201002C72E02EB2F6
-:107B500000001613000000800200009000000000EA
-:107B60000000007879613832000016131218024CB8
-:107B7000E2256EB200000000003402B808806E32C8
-:107B800000000000D4A0015008006E320000000088
-:107B9000DB79016008006E320000F711DD0000049F
-:107BA000080000F21000000000180080878D853763
-:107BB0000000000000F801E0060085320000500AD5
-:107BC0001201000009C021B218003600000000F8C0
-:107BD000730A03F9300016131200005CA28D2CB258
-:107BE00000001613040701EC16C06EBC0000000074
-:107BF00000B000E00600003200008508DA5C01E811
-:107C000006808B92000085089F41018052206EBC47
-:107C100000005F0A9F98018052206EBC00000000A7
-:107C2000000000D80280013200000000005401FC76
-:107C300002C06E3200C05D0A1801000CA8CD3EB231
-:107C40002080850831000008088036B2000000005E
-:107C5000000000F812812F343B0085081201002C2F
-:107C600082CD2EB2000016130000008002000090AA
-:107C70000000E2110098012809006EF2000085085A
-:107C8000000000800200009000008508D54101E05E
-:107C9000064081920000850804B0008002006EBC9E
-:107CA000000000000090010008006E320000001388
-:107CB0000078016008006EF2000085080000008076
-:107CC0000200009000000000000C027809806E3273
-:107CD0000000670A04D4018012C06EBC00000000DE
-:107CE000000000781980973700000000009001E044
-:107CF000E6256E3A0000001300000080020000F04C
-:107D000000006B0A0000008002000090000085085F
-:107D1000009001E00600809200000000009001E069
-:107D20000600803200000009000000800200009080
-:107D30000000161380000080F2802FB60000C70FED
-:107D400000A8012009006EF20000140A80000080E3
-:107D5000F2802FB60000850800000080020000902D
-:107D600000000000000000D8028001320000000086
-:107D70000000007809006E320200760A04B9008023
-:107D800082CD6EBC0000780A800000807280FCB654
-:107D900000007B0A000000FC020000920000780A4C
-:107DA000800000808280FCB600007B0A000000FC9E
-:107DB0000200009200001613040000800200F5BCCF
-:107DC00000000000000000A842BD97300000000045
-:107DD000541809FEF2C07C3000C0810A1801000C62
-:107DE000A8CD3EB200000000000E01EC06000034F9
-:107DF00000000000005401EC06C02F32208000007B
-:107E000000000008088036320000F3031201002C45
-:107E100082CD2EB2000016130000008002000090F8
-:107E2000000000000062013808C06E3200080080C7
-:107E300000000028090037320000EB1100000008A4
-:107E4000E80100F400001613040701EC16C06EBC34
-:107E500000000000000000A8A2002D370A0000006A
-:107E6000000000780900363200000000001809E226
-:107E7000070000320000870A04010078198097BCCF
-:107E80000200920A04B9008082CD6EBC0000004856
-:107E9000D6010078C9CD2C3200008B0AB6000080D4
-:107EA000020000B00000161312000064028097B2B6
-:107EB00000008D0A1208006402006EB200008E0AF3
-:107EC0001218006402006EB200008F0A12100064E3
-:107ED00002006EB200000000A65401EC06C02F3272
-:107EE00000007D08000E01EC060000940020004C0C
-:107EF000D6010078C9CD2C320000930AB60000806C
-:107F0000020000B00000161312000064028097B255
-:107F10000000950A1208006402006EB20000960A82
-:107F20001230006402006EB20000970A123800643A
-:107F300002006EB20000980A1240006402006EB2A5
-:107F40000000990A1248006402006EB200009A0A0A
-:107F50001210006402006EB200009B0A1218006446
-:107F600002006EB200009C0A1220006402006EB291
-:107F700000009D0A1228006402006EB2000000009A
-:107F8000A65401EC06C02F3203007D08000E01EC60
-:107F90000600369200000000000000FC02000132E2
-:107FA0000000A30A0000001408803D9200000000B9
-:107FB000000000FC020001320000A60A040000DC00
-:107FC00053603DB318000000000000F8738A0339C5
-:107FD000A20A3600000000C0020036920000000035
-:107FE000005401FC02C06E3200000000000000D806
-:107FF0000280013200C0AC0A1801000CA8CD3EB2CC
-:108000002080000000000008088036321500EF03D1
-:108010001201002C82CD2EB2000016130000008049
-:10802000020000900000000000280000070000325D
-:10803000000000000030000007C02C320010008259
-:108040000038000007003732000016131200004805
-:1080500002C080B200007D08CA010008E801009457
-:10806000000016138001008062812FB62D001613C8
-:108070001200002C82CD2EB20000B50A1D01008036
-:10808000020000B000007D08000000F862812F951A
-:10809000000016138000008002812FB6000000004F
-:1080A000000000F802812F342A007D081201002C04
-:1080B00082CD2EB200001613000000800200009056
-:1080C0000000D7110000002C09C085D20000641107
-:1080D00000000030030038F20000F303230100F831
-:1080E00022812FB43E00F3031201002C82CD2EB268
-:1080F0000000161300000080020000900000D7115D
-:108100000000002C09C085D20000F303000000F835
-:1081100022812F940000C50A380100D8028001B2E4
-:108120000000C30A1E000080020000B00000C50A63
-:108130001A010080020000B0000038120000006840
-:108140001F80F6FA0000F303000000800200009098
-:108150000000C90A12010060084023B2008200003A
-:108160000000000808803632000038120000006469
-:108170001F40F6FA0000F3030000008002000090A8
-:108180000000161312000024080023B2000016138A
-:108190001200002008C023B20000161312000018BD
-:1081A000088023B200C0D40A1801000CA8CD3EB24A
-:1081B0000000CC0A12000038028081B200001613C1
-:1081C0001200003C020082B20000161312000030C0
-:1081D000024082B20000161312000034020086B280
-:1081E00020800000000000080880363200003812AD
-:1081F0000000005C1FC0F5FA0000F30300000080DF
-:108200000200009000000000450000D8020000328B
-:108210000000000000000000074080320000000065
-:10822000001000000740823200000000001800002B
-:10823000070086320000161312000050F2C138B455
-:1082400000007A0F003001E016206EFA0000DD0A0F
-:108250003801002CF8010BB40000DD0A020D028089
-:10826000A25B80BC000000000000002CC8C182346A
-:108270000000DF0A8000008042812FB60000B40FAA
-:1082800000000080020000F0000016139FA801E02B
-:1082900016206EBC0000D40F00000080020000F029
-:1082A0000000E50A270100D8028001B200000000AA
-:1082B000C700002CE8C08234000000000000000865
-:1082C000D801003400000000D54001E006008732EC
-:1082D00008004B12001801E8762081F900006411B3
-:1082E00000000030030038F20000E90A2319000002
-:1082F000078081B23E0016131200002C82CD2EB2F0
-:108300000000EB0A1D210000070082B20000EE0A07
-:10831000000000F862812F950000EE0A80000080C6
-:1083200002812FB62A0016131200002C82CD2EB225
-:1083300000000000000000F802812F340000161336
-:1083400080000080A2802FB6000054100000002C96
-:10835000F90100F4000016130401008062802DBCB6
-:108360001000F40A2C30000017E02CB90000F60AC7
-:108370008E39000007C082B20000F60A0008000033
-:10838000070087920000F60A8E390000B7C182B458
-:108390000000000000080000070087320000F80A13
-:1083A000120100E802C021B218003600000000F8F7
-:1083B000730A03F90000F60A9F010014184081BCFB
-:1083C0000000FE0A0400008002C085BC00001613F5
-:1083D0001200006802C585B00000000000000078AF
-:1083E00009C58530000016130201008082BA97BCCF
-:1083F000000016130601008092BA97BC0000161305
-:108400001200004802C080B2000016130401008070
-:10841000D28180B50000F603CA010008E88180948B
-:10842000000016138001008082812FB60000040B2B
-:108430001E000080020000B00000060B1A01008040
-:10844000020000B000003812000000681F80F6FA39
-:108450000000F303000000800200009000001613EB
-:108460009FA801E016206EBC00007A0F00000014E7
-:10847000080000F200000A0B8000008042812FB645
-:108480000000B40F00000080020000F00000D40FD4
-:1084900000000080020000F000007F08040000805F
-:1084A000024081BC00000E0B120100E802C021B2A4
-:1084B00018003600000000F8730A03F900000000FD
-:1084C0000000007809C58530000016130201008005
-:1084D00082BA97BC000016130601008092BA97BCBE
-:1084E00000007F081201006802C585B00000161365
-:1084F000000000800200009000007D0880000080E5
-:10850000F2C185B60000170B1C41028006C085B27F
-:10851000000000000000006802C585300000000077
-:10852000000000701F00F73A00007D08000000F80E
-:1085300022812F9400007D0880000080F2C185B662
-:108540000000D7110000002C09C085D20000F30301
-:10855000D20100941E40E99A00001613042000186E
-:1085600008006EB20000161380000080F2812FB662
-:1085700000008C1200000080020000F000001613C2
-:1085800004010080028080BC0000161304510180A9
-:1085900002806EBC000016130421018002006EBC34
-:1085A00000000000003C00E8064081320000250B7E
-:1085B0001F000080020000B00000220B9E400278E5
-:1085C000094068B20000161300000080020000900D
-:1085D0000000290B8001008082812FB600007F08F7
-:1085E0002A3101E0060000B218000000CA0000F8BD
-:1085F000730A03397F083600000000C0020036927B
-:1086000000007F0880010080A2802FB618000000C3
-:10861000CA0000F8730A03397F083600000000C062
-:10862000020036920D002F0B000000580800369211
-:1086300000002F0B00000058080000921B000000F3
-:1086400000000058080036320000161304200018FD
-:1086500008006EB20000161380000080F2812FB671
-:1086600000008C1200000080020000F000000000FA
-:108670000030002808006E3200000000545401FC55
-:1086800002C06E320000940B380000A4088082B251
-:108690000000940B0428010408006EB200001613B9
-:1086A0009F500104A85B80BC00000000005001E85E
-:1086B0000600003200005E0B0801007819A082BCA1
-:1086C00000000000002801E0A660803C00003C0B98
-:1086D0002A010014080000B200000000CA000014C3
-:1086E0001840813A0000C70F00A80120A9206EFAA7
-:1086F0000000161306010280821B92BC00000000DD
-:10870000002001E0A6206E3C00000000003000E0E8
-:10871000060000320000000000A801E006009232CE
-:1087200000000000000000D80280013200C0500BA1
-:108730001801000CA8CD3EB20000470B04000080D9
-:10874000024081BC0000000000000014080000325C
-:1087500018000000000000F8730A0339410B3600CE
-:10876000000000C0020036922080000000000028B7
-:108770000980363200008111000000D8020000D2CA
-:1087800000004B0B04000080028092BC18003600F1
-:10879000000000F8730A03F900000000000000D890
-:1087A0000280013200C0500B1801000CA8CD3EB26F
-:1087B00018000000000000F8738A03394B0B00001A
-:1087C000000000C0020036320000360000000080C9
-:1087D0000200009000000000DE000008E801003404
-:1087E00000000000DF00013808C06E320000000009
-:1087F0000010000007000032000000000018000018
-:1088000007808232000000000030000007C02C32D8
-:108810000020008000380000070037320000000010
-:10882000CA3D000C078083320000000000000014E5
-:108830001840813A00005C0B040201EC16C06EBCCB
-:1088400000000000C00100141840813A0000000040
-:10885000000000F892802F3400C016131200004070
-:10886000A28D39B20000D70B1201004802C080B2BD
-:1088700000001613000000800200009000000000BD
-:10888000000000280880973200000000000000A4CB
-:1088900008808232000000000010006C18206E3A40
-:1088A000000000000018004C08006E320000C70FE6
-:1088B00000A8012019206EFA00001613060102809C
-:1088C000821B92BC00000000002001E016206E3CDC
-:1088D0000000000000A801E0060092320000690BD1
-:1088E000003801E006408092000000000060006C4B
-:1088F00018206E3A000000000068004C08006E323C
-:1089000000006B0B9F010004686080BC0000740BCA
-:10891000000000181820009C000016138001008041
-:10892000A2802FB600006E0B120100E802C021B237
-:1089300018003600000000F8730A03F90000000078
-:10894000CA70001808006E320000670B0201008038
-:10895000626080BC000016139F000014184081BCA8
-:1089600000000000CA0100F802802F3500A0690B4A
-:1089700012010040A28D39B20000161300000080E1
-:10898000020000900000790B80000080A2802FB6CA
-:1089900000007C0B04000080A2A081BC0000161324
-:1089A0009F000014184081BC00000000CA0100F8BC
-:1089B00002802F3500A0161312000040A28D39B29C
-:1089C00000000000000000F8A2802F3500007C0BA2
-:1089D000120100E802C021B218003600000000F8C1
-:1089E000730A03F900000000002801E006000032CD
-:1089F00000000000003C00E806408132000000005A
-:108A0000003000E00680823200000000002000E01C
-:108A10000680813200000000001000E006C08632AF
-:108A200000000000001800E006C0843200001613A9
-:108A30000400008032E186B20000860B1F010008AE
-:108A4000090000B20000970B0420018002006EBCF8
-:108A500000001613000000800200009010000000CB
-:108A600000000010790B1638080000000000000C10
-:108A7000790B16380000000000000004A9002D3713
-:108A80000004010000000004C94D903A02000000FB
-:108A9000000000A8820D913700000000000000A82F
-:108AA00012A42A3A00008F0B80400280E2017CB6BB
-:108AB0000000161304400278B93F7CB000000000AB
-:108AC00000000008E9A5903A0000910B9F010010FA
-:108AD000190091BC9F000000000000100900363210
-:108AE00000008A0B0401008042E490BC00001613D1
-:108AF00004210180829B90BC0000970B0000008045
-:108B000002000090000000000010006C08006E32AF
-:108B1000000000000018004C08006E320000161320
-:108B20000400008032E186B200003210510000D80B
-:108B3000020000F200009A0B0050013CA85B809CF0
-:108B400000007F08003001E00600009200009F0B4B
-:108B50003E510100A81B80BA00000000DE0000F8B2
-:108B6000F2812F3400000000005801EC06C0EE3204
-:108B700000009F0B80010080328087B6000000005B
-:108B8000000000F8E2802F340000E310603001E0C4
-:108B9000060000F20000E90B0000008002000090D7
-:108BA0000000000000000014080000320000A90BC3
-:108BB000040201EC16C06EBC00000000C9010014E4
-:108BC0001840813A00000000C001013808C06E3230
-:108BD00000000000DF0000A4A8608A3C000016131B
-:108BE0000F000080020000B000C0AD0B1201004079
-:108BF000A28D39B200001613000000800200009020
-:108C000000000000003000E006000032000000001C
-:108C1000DF0000A4A8608A3C000016130F0000804B
-:108C2000020000B0000000000000013808C06E32F1
-:108C300000000000DEA8012099226E3A0000161301
-:108C400006010280821B92BC000016139F2001E0E7
-:108C500096226EBC0000B20B80000080F2802FB61E
-:108C60000000C70F00000080020000F00000B90BF8
-:108C70001F5001E8060000B20000B50B04000080A0
-:108C800002C083BC0000B90B005001E8F660809C74
-:108C90000800000000400278399AFE3800001613E0
-:108CA0000201008082BA97BC000016130601008002
-:108CB00092BA97BC0800000000400268129AFE3881
-:108CC0000000BE0B2AA901E0060092B2180036008F
-:108CD000CA0000F8730A03F91D00BE0B04000080EF
-:108CE00002A417B80000BA0B04000014184081BC9D
-:108CF00000001613000000800200009000006411C4
-:108D000000000030030038F20000C10B8001008039
-:108D100032802FB63E0016131200002C82CD2EB2E8
-:108D200000000000000000D80280013200C0D20B19
-:108D30001801000CA8CD3EB220800000C30000281E
-:108D40000980363200008111000000D8020000D2F4
-:108D50000000C70B04000080028092BC00000000ED
-:108D6000000000141840813A0000CC0B0400008081
-:108D7000024081BC18003600000000F8730A03F9B5
-:108D80000000D00B04000014184081BC0000C80B88
-:108D90001200000009C021B20000C90B00000080D1
-:108DA0000200009018003600000000F8738A03F9F2
-:108DB0000000641100000030030038F20000D00B06
-:108DC0008001008032802FB63E0016131200002C66
-:108DD00082CD2EB200000000C30000D80280013214
-:108DE00000C0CC0B1800000CA8CD3EB2000016133A
-:108DF0008000008072802FB60020008000000028D4
-:108E0000090037320000661200000008E80100F493
-:108E1000000016131200004802C080B200000000DB
-:108E2000000000141840813A0000161380010080F1
-:108E3000A2802FB618003600CA0000F8730A03F9A2
-:108E40001D0016130400008002A417B800001613BA
-:108E50009F000014184081BC0000D80B0B0100805B
-:108E6000020000B000004B1200000080020000F081
-:108E70000000E00B8001008092802FB62B00E60BF3
-:108E80001201002C82CD2EB20000161300000080CB
-:108E9000020000900000E30B1D010080020000B002
-:108EA0000000E60B8001008062812FB600001613DF
-:108EB00000000080020000900000E60B80000080AF
-:108EC00002812FB62A0016131200002C82CD2EB27A
-:108ED00000000000000000F802812F3400007D082F
-:108EE00004000080028085BC00005D12000000804C
-:108EF000020000F0000069060000001C0880859256
-:108F000000007F0880010080A2802FB600001613A9
-:108F10000000008002000090000016138000008016
-:108F2000E2802FB60000EE0B8001008082812FB618
-:108F3000000016130431018002006EBC00001613FD
-:108F400004310080829B82BC000016130201008065
-:108F500012A082BC00000000CE0100D802800132C5
-:108F600000C0F50B1801000CA8CD3EB22080000017
-:108F70000000000808803632000038120000005C53
-:108F80001FC0F5FA0000F30300000080020000900B
-:108F90000000161380000080A2802FB60000161378
-:108FA0008000008082802FB600001613040000802D
-:108FB000028082BC00000000600000D80200003285
-:108FC0000000FD0B3F00003C084080B20000FD0B9C
-:108FD00080010080E2812FB600000000DE0000F872
-:108FE000F2812F3400000000005801EC06C0EE3280
-:108FF000000000004D00000067E0833E000000001C
-:10900000000800000700803200000000001000008F
-:1090100007C08632000000000018000007C084323C
-:109020000000490C04000028D8A082BC00001613E0
-:1090300009010080020000B00000000000000018DC
-:10904000D8A0813C00001F0C0400003CD8E083BC89
-:109050000000161304010080028081BC0000090C8E
-:109060000400008072802DBC000016131200005016
-:1090700002C038B200001D0C510000D812802D9A99
-:109080000000161312000050F2C138B40000160C94
-:10909000280000D8020000B20000130C80010080FC
-:1090A000F2C185B600000F0C1F400284E60100B437
-:1090B0000000130C1D0100F822812FB40000130CD6
-:1090C000000000F862812F950000110C1D01008046
-:1090D000020000B000000000000000F862812F359F
-:1090E00000000000004002800240683200001613B9
-:1090F0001F010080020000B00000150C343000E0B9
-:1091000016206EBC0000B40F00000080020000F0CA
-:109110000000D50FDA5B01EC0640EDF218003600D6
-:10912000000000F8730A03F900001B0C0400008023
-:1091300072802DBC0000161380010080A2802FB623
-:109140000000160C670000F8A2802FB5000016136F
-:10915000120000E802C021B20000161304010080D2
-:1091600072802DBC00000000510000D802000032C7
-:1091700000003E1000000000D82080FA0000FE0B26
-:109180004D00000067E0839E00001613120000509F
-:10919000F2C138B400002C0C28000080084000B256
-:1091A0000000290C80010080F2C185B60000250C6A
-:1091B0001F400284E60100B40000290C1D0100F8E4
-:1091C00022812FB40000290C000000F862812F9545
-:1091D0000000270C1D010080020000B0000000000C
-:1091E000000000F862812F3500000000004002807E
-:1091F00002406832000016131F010080020000B018
-:1092000000002B0C343000E016206EBC0000B40FC0
-:1092100000000080020000F00000D50FDA5B01ECD6
-:109220000640EDF200004F0C80000080E2802FB677
-:109230000000300C042100E0068081B200003E10E6
-:1092400000000034080000F200000000002000E0F0
-:109250000680813200000000003C00E806408132B8
-:109260000000360C2A1100E0D6E086BA180036005D
-:10927000CA0000F8730A03F91D00360C04010080CF
-:1092800002A417B80000320C9F010080180088BCAF
-:1092900000001613000000800200009000004B1236
-:1092A00000000080020000F00000641100000030A7
-:1092B000030038F208003A0C231901E8762081B93E
-:1092C0003E0016131200002C82CD2EB200003E0C80
-:1092D0001D1800E006C084B200003E0C8000008033
-:1092E00002812FB62A0016131200002C82CD2EB256
-:1092F00000000000000000F802812F34000054102C
-:109300000000002CF90100F40000430C0400008070
-:10931000020088BC0000420C1201000009C021B20A
-:1093200018003600000000F8730A03F91D00161338
-:109330000401008002A417B8000016130401008085
-:10934000028080BC000000000000007809C5853064
-:10935000000016130201008082BA97BC00001613A9
-:109360000601008092BA97BC0000F6031201006863
-:1093700002C585B0000016130000008002000090B6
-:10938000000000000030007819206E3C0000161329
-:1093900004010080E2A582BC00001613800000805A
-:1093A000A2802FB60000161304010080020088BCC2
-:1093B0000000161304010080028080BC0000161318
-:1093C00012000050F2C138B400000000C0010138A2
-:1093D00008C06E320000530C040201EC16C06EBCD3
-:1093E00000C0161312000040A28D39B20000540CC8
-:1093F000C90100140800009200000000453000E0A0
-:10940000060000320000600C28000008E80100B4EB
-:1094100000005D0C80010080F2C185B60000590C8F
-:109420001F400284E60100B400005D0C1D0100F83D
-:1094300022812FB400005D0C000000F862812F959E
-:1094400000005B0C1D010080020000B00000000065
-:10945000000000F862812F3500000000004002800B
-:1094600002406832000016131F010080020000B0A5
-:1094700000005F0C8000008042812FB60000B40F16
-:1094800000000080020000F00000D50FDA5B01EC64
-:109490000640EDF200200080DF000028090037328E
-:1094A00000006612DE0000D8028001F208004B12B4
-:1094B000001801E8762081F90000641100000030F6
-:1094C000030038F20000660C8001008032802FB665
-:1094D0003E0016131200002C82CD2EB200006B0C41
-:1094E000290801E406C02DB20000700C1D000080A8
-:1094F000020000B00000700C8000008002812FB6D6
-:109500002A0016131200002C82CD2EB20000700C1F
-:10951000000000F802812F9400006D0C1201000081
-:1095200009C021B218003600000000F8730A03F9E0
-:109530001D006F0C0401008002A417B800006C0C21
-:10954000000000141840819C2B0016131200002C00
-:1095500082CD2EB2000055100000002CF90100F45D
-:109560000000730C04010080024081BC180036002A
-:10957000000000F8730A03F90000161312000048F7
-:1095800002C080B2000000000000007809C58530EC
-:10959000000016130201008082BA97BC0000161367
-:1095A0000601008092BA97BC0000F6031201006821
-:1095B00002C585B000001613000000800200009074
-:1095C000000016138000008082802FB60000161362
-:1095D00004310080829B82BC0000161302000080D0
-:1095E00012A082BC0000161304000080028082BC1E
-:1095F0002500000000000010090036321000801223
-:1096000000000014A96080D900000000000000D80C
-:109610000280013200C0840C1801000CA8CD3EB2BB
-:109620002080000000000008088036320000381258
-:109630000000005C1FC0F5FA0000F303000000808A
-:109640000200009000C00000000000F8A28D2F3141
-:1096500000000000000000D80200003200000000FE
-:1096600000000000078081320000000000080000B8
-:1096700007008032000000000010000007C08632A2
-:10968000000000000018000007C08432000016131C
-:1096900012000050F2C138B40000900C800000802D
-:1096A00082802FB60000000000000068A860803CA7
-:1096B000000000000000003C084080320000D40F91
-:1096C00000000004088082F20000910C12010000EA
-:1096D00009C021B218003600000000F8730A03F92F
-:1096E0001D00940C0400008002A417B8000016139B
-:1096F00080010080A2802FB60000900C000000F8CE
-:10970000A2802F9500000000000000006820803A31
-:1097100000009A0C0400002868A082BC0000161308
-:109720000C000080020000B00000161380000080D2
-:10973000E2802FB600003E1000000080020000F022
-:109740000000860C000000D80200009200001613F2
-:1097500080000080A2802FB600000000000000D82A
-:10976000028001320020008000000028090037320A
-:109770000000621200000008E80100F41800360042
-:10978000CA0000F8730A03F90000A50C040201ECFA
-:1097900016C06EBC00000000C00100F892802F349B
-:1097A00000C0A30C12010040A28D39B200001613B4
-:1097B00000000080020000902B00A50C1201002C7C
-:1097C00082CD2EB20000161300000080020000902F
-:1097D000000016131F010080020000B00000A80C5A
-:1097E0008001008082812FB60000161304310180B1
-:1097F00002006EBC00000000000000D802800132B0
-:109800000000AB0C12010060084023B20082B40CCF
-:1098100000000008A88D809200001613120000249A
-:10982000080023B2000016131200002008C023B263
-:109830000000161312000018088023B200C0C90CE3
-:109840001801000CA8CD3EB20000AE0C120000388A
-:10985000028081B2000016131200003C020082B2A6
-:109860000000161312000030024082B200001613EE
-:1098700012000034020086B22080000000000008C0
-:10988000A88D80320000BC0C80010080F2C185B63A
-:109890000000B80C1F400284E60100B40000BC0CBC
-:1098A0001D0100F822812FB40000BC0C000000F85C
-:1098B00062812F950000BA0C1D010080020000B0EB
-:1098C00000000000000000F862812F350000000059
-:1098D0000040028002406832000016131F01008021
-:1098E000020000B032000000000000100900363213
-:1098F0000000801200000014090080D2000016133E
-:109900001200006802C585B0000000000000007869
-:1099100009C58530000016130201008082BA97BC89
-:10992000000016130601008092BA97BC0000C40C18
-:109930003400005C1FC0F5BA0000B40F00000080C6
-:10994000020000F00000C60C8000008092802FB65C
-:1099500000007F08003000E00600009200007F0851
-:10996000120100E802C021B218000000000000F857
-:10997000730A03397F083600000000C002003692E7
-:1099800000000000450000D8024000320000000046
-:10999000410000000780863200000000000800003F
-:1099A00007008032000000000010000007408232F3
-:1099B00000000000001800000700863200001613A7
-:1099C00012000050F2C138B400000000000000781E
-:1099D000388087350000161380000080728087B6BB
-:1099E0000000000000A001E016206E3A0000000018
-:1099F0000000007809C585300000000000A801E0E3
-:109A000016206E3C08000000D2010078E9E5833999
-:109A1000180016131F410284E6A197B90000D90C63
-:109A2000365101E816E083BC0000D90C1D0100800E
-:109A3000020000B000000000000000F862812F3535
-:109A4000000016139F2001E0064080B20000DC0CED
-:109A50008001008082812FB600000000003001E00C
-:109A60000640803200000000000000D80280013271
-:109A70000000DF0C34180000078081B20000B40F32
-:109A800000000080020000F010004B1200300000C7
-:109A900017E02CF900100080003800000700373272
-:109AA0000000641100000030030038F20000E40CF4
-:109AB0008001008032802FB63E0016131200002C69
-:109AC00082CD2EB20000E90C29210000070082B2ED
-:109AD0000000E70C1201000009C021B21800360096
-:109AE000000000F8730A03F91D00EF0C0401008068
-:109AF00002A417B80000E50C000000140800009252
-:109B00000000EC0C1D3100E0060000B20000EF0C7C
-:109B10008001008062812FB60000161300000080D3
-:109B2000020000900000EF0C8000008002812FB640
-:109B30002A0016131200002C82CD2EB20000000065
-:109B4000000000F802812F3400005D120000002C9C
-:109B5000F90100F400005410000000F8A2802FF476
-:109B60000000F40C04000080024081BC0000F40CF2
-:109B7000120100E802C021B218003600000000F80F
-:109B8000730A03F90000F6031201004802C080B214
-:109B90000000161300000080020000900000FE0C80
-:109BA00080010080F2C185B60000FA0C1F400284DB
-:109BB000E60100B40000FE0C1D0100F822812FB464
-:109BC0000000FE0C000000F862812F950000FC0CE4
-:109BD0001D010080020000B000000000000000F83D
-:109BE00062812F3500000000004002800240683290
-:109BF000000016131F010080020000B00000000DDD
-:109C000004000080024086BC0000AB1200900108F6
-:109C100009006EF20000DF1200000080020000F078
-:109C20000000070D330100D8028001B20000070DCB
-:109C300080010080B20172B60000070D9FF0018024
-:109C400082DB87BC0000070D9FF8018022216EBCDB
-:109C50000000000000E801E00600EE320000000015
-:109C600000F001E006C0873208000000001801E89B
-:109C70007620813900000D0D80010080D2802FB642
-:109C800000000D0D04B0008002006EBC000000005A
-:109C9000CD0000F872812F343D000D0D1201002C13
-:109CA00082CD2EB20000161300000080020000904A
-:109CB00000001C0D270901E406C02DB200C0140DE0
-:109CC0001801000CA8CD3EB2000000000000007892
-:109CD00009C58530000016130201008082BA97BCC6
-:109CE000000016130601008092BA97BC00001613FC
-:109CF0001200006802C585B020807F0800000008BF
-:109D0000088036922C000000000000100900363256
-:109D1000000080120098011409006ED200000000BB
-:109D2000004001E00640883200000000D508000035
-:109D300007408832000000000030000007C02C32CD
-:109D400000400080CA3900000700373200001613B7
-:109D50001200004802C080B200600000000000084D
-:109D6000088036320000200D1D000080020000B087
-:109D70000000200D8000008002812FB62A001613FB
-:109D80001200002C82CD2EB200000000000000F86E
-:109D900002812F34000055100000002CF90100F45E
-:109DA000000000000000007809C58530000016138F
-:109DB0000201008082BA97BC0000161306010080E1
-:109DC00092BA97BC0000F6031201006802C585B084
-:109DD0000000161300000080020000900000000048
-:109DE000545401FC02C06E3200000000000000D894
-:109DF0000280013200C02C0D1801000CA8CD3EB22B
-:109E00002080000000000008088036320000F303C4
-:109E10001201002C72E02EB2000016130000008028
-:109E200002000090000016138001008082812FB68E
-:109E300000008C120020001808006EF200001613BB
-:109E40001F30002808006EB200000000000000A4CF
-:109E500008808232000000000010006C08006E32A2
-:109E6000000000000018004C08006E3200001613BD
-:109E70000400008032E186B2000032100000008051
-:109E8000020000F00000360D0050013CA85B809CF1
-:109E90000000161300000080020000900000000087
-:109EA00000500100A81B803A000000000000008064
-:109EB0000800003200000000510000D8020000320B
-:109EC000000000004D00000067E0833E000000003D
-:109ED00000080000070080320000000000100000B1
-:109EE00007C08632000000000018000007C084325E
-:109EF00000006D0D04000028D8A082BC00001613DD
-:109F000009010080020000B00000000000000018FD
-:109F1000D8A0813C0000540D0400003CD8E083BC74
-:109F20000000161304010080028081BC0000450D72
-:109F30000400008072802DBC000016131200005037
-:109F400002C038B200004D0D510000D812802D9A89
-:109F50000000161312000050F2C138B41800360089
-:109F6000000000F8730A03F900004B0D04000080A4
-:109F700072802DBC0000161380010080A2802FB6D5
-:109F80000000460D670000F8A2802FB500001613F0
-:109F9000120000E802C021B2000016130401008084
-:109FA00072802DBC00000000510000D80200003279
-:109FB0000000520D2A010000D82080BA0000510D87
-:109FC0001201000009C021B218003600000000F89C
-:109FD000730A03F900000000000000D80240843238
-:109FE0001D0016130400008002A417B800004610DC
-:109FF0000060006C08006EF200003A0D4D00000099
-:10A0000067E0839E0000161312000050F2C138B4BE
-:10A0100018003600000000F8730A03F91D005B0DFC
-:10A020000400008002A417B800001613800100800D
-:10A03000A2802FB60000550D670000F8A2802FB552
-:10A04000000016131200000009C021B21D001613F3
-:10A050000401008002A417B8080000000040027844
-:10A06000399AFE38000016130201008082BA97BCAC
-:10A07000000016130601008092BA97BC0800161360
-:10A0800012400268129AFEB8000016130B000080FE
-:10A09000020000B00000641100000030030038F23C
-:10A0A000000016131F00006CD8E086BA00003210C2
-:10A0B000510000D8020000F20000650D0000003CD5
-:10A0C00008408092000016130000008002000090FB
-:10A0D0000000390D04010080028081BC00006B0D7E
-:10A0E00080010080A2802FB600006A0D12010000DE
-:10A0F00009C021B218003600000000F8730A03F905
-:10A1000000000000000000D8024084321D00161339
-:10A110000400008002A417B8000046100060006C24
-:10A1200008006EF200003A0D4D00000067E0839ECB
-:10A130000000161380000080A2802FB600000000EF
-:10A14000C001013808C06E3200000000453000E058
-:10A15000060000320000161312000050F2C138B49D
-:10A160000000750D040201EC16C06EBC000000007A
-:10A17000C90100141840813A00C0750D1201004059
-:10A18000A28D39B20000161300000080020000907A
-:10A1900000C00000000000F8A28D2F310000000078
-:10A1A00000A8012099226E3A0000161306010280D1
-:10A1B000821B92BC000016139F2001E096226EBC09
-:10A1C00000007B0D80000080F2802FB60000C70FDA
-:10A1D00000000080020000F000007F0D0400003C41
-:10A1E000D8E083BC00007E0D9F3101E096226EBC5A
-:10A1F00000000000003001E0060000320000860D83
-:10A20000005001E8F660809C0800000000400278E1
-:10A21000399AFE38000016130201008082BA97BCFA
-:10A22000000016130601008092BA97BC08000000D7
-:10A2300000400268129AFE380000850D9F3101E04F
-:10A2400096226EBC00000000003001E006000032E3
-:10A2500000000000005001E806000032000000008D
-:10A2600000A801E00600923218003600000000F855
-:10A27000730A03F91D008B0D0400008002A417B8B7
-:10A280000000870D04000014184081BC0000161364
-:10A290000000008002000090000016138000008083
-:10A2A00072802FB600000000000000D8028001324A
-:10A2B00000200080000000280900373200006612EC
-:10A2C00000000008E80100F4000016131200004826
-:10A2D00002C080B20000641100000030030038F2B8
-:10A2E0000000930D23010014184081BA3E0016139C
-:10A2F0001200002C82CD2EB20000161380010080C7
-:10A30000A2802FB618003600CA0000F8730A03F9BD
-:10A310001D0016130400008002A417B800001613D5
-:10A320009F000014184081BC0000940D0B010080B8
-:10A33000020000B000004B1200000080020000F09C
-:10A3400000009C0D2931010C09006EB22B007D0824
-:10A350001201002C82CD2EB20000161300000080E6
-:10A36000020000900000BE0F000C020009806EF297
-:10A370000000A50D000000800200009000005D12AA
-:10A3800000000080020000F0000000000000001C3F
-:10A39000080090320000A40D04000028098080B25B
-:10A3A00000008111000000D8020000D20000A40DBE
-:10A3B00004000080028092BC18003600000000F803
-:10A3C000730A03F900006806000000080800009204
-:10A3D0000000A80D1D010080020000B000007D08F3
-:10A3E0008001008062812FB60000161300000080FB
-:10A3F0000200009000007D088000008002812FB6DE
-:10A400002A0016131200002C82CD2EB200007D0807
-:10A41000000000F802812F940000161380010080D4
-:10A4200082812FB60000161304000018094081B283
-:10A430000000E30F00000080020000F00000C70FE2
-:10A4400000A8012009006EF2000000000030010C9D
-:10A4500009006E320000BE0F000C020009806EF28F
-:10A4600000007F08000000800200009000004B12F6
-:10A4700000000080020000F000005D12000000807B
-:10A48000020000F0000068060000001C0800909226
-:10A4900000000000545401FC02C06E32000016138C
-:10A4A0008001008082812FB6000016131F000080FB
-:10A4B000020000B010000000000000A8780B163861
-:10A4C00008000000000000AC780B16380000000007
-:10A4D000000000B0A8002D3700040100000000B00B
-:10A4E000C80D8B3A00000000005001B408806E32A5
-:10A4F0000000C70D0431019008006EB20200000098
-:10A50000000000C8828D8A3700000000000000C8EB
-:10A51000C2A22C3A1800C50D86410278880D78B683
-:10A520000000161304000080A2E28ABC000016138B
-:10A5300004410280B23F78B00000BE0D9F0100A828
-:10A5400018808ABC9F00BE0D000000A8080036924B
-:10A550000000000000400204B83F78300000DA0D2F
-:10A5600000000004D862809C00001613020C0280D8
-:10A57000A21B89BC000016138000008082802FB6C9
-:10A5800002000000000000C8828D8A370000000031
-:10A59000000000C8C2A22C3A1800D00D86410278F3
-:10A5A000880D78B60000161304000080A2E28ABC71
-:10A5B0000000161304410280B23F78B00000C90DBC
-:10A5C0009F0100A818808ABC9F00C90D000000A848
-:10A5D000080036920000D30D28400204B83F78B03E
-:10A5E00000000000C8010004D862803C000016137F
-:10A5F0009F000080024080B20000D70D0201009051
-:10A60000182089BC00000000000000B408000032DF
-:10A610000000C90D9F0100A818808ABC9F00C90DC9
-:10A62000000000A8080036920000DA0D0400009037
-:10A63000182089BA000016139F000004486280BCED
-:10A6400000001613900000B448628BBA0300161382
-:10A6500004400200081EFFB80000E20D00000000E8
-:10A66000D822809A0000090E04000080A2E28ABC71
-:10A6700002000000000000C8828D8A370000000040
-:10A68000000000C8C2A22C3A1800070E86400278CB
-:10A69000880D78B60000161304400204B83F78B065
-:10A6A0000300161304400200081EFFB83800000023
-:10A6B0000000001009003632000080120000001473
-:10A6C000090080D20000E80D12010060084023B2AA
-:10A6D0000082000000000008088036320000F3030A
-:10A6E0001201002C72E02EB2000016130000008050
-:10A6F000020000900000161312000024080023B28C
-:10A70000000016131200002008C023B20000161328
-:10A7100012000018088023B200000000000000D8DA
-:10A720000280013200C0F20D1801000CA8CD3EB22B
-:10A730000000EC0D12000038028081B200001613F8
-:10A740001200003C020082B200001613120000301A
-:10A75000024082B20000161312000034020086B2DA
-:10A760002080E60D000000080880369200000000FE
-:10A77000000000D802000032000000000038020093
-:10A78000B81B803A00000000643001E016206E3AE9
-:10A7900000000000000000000740803200000000C0
-:10A7A00000080000070080320000000000100000D8
-:10A7B00007408232000000000018000007008632C7
-:10A7C0000000161312000050F2C138B4000000005F
-:10A7D000000000D8028001320000000000180000D4
-:10A7E0000780813200000000002000000700823254
-:10A7F000100000000030000017E02C3900000000BD
-:10A8000000380000F7010B340000010E80010080C9
-:10A81000328087B60000000000380000B7017034B5
-:10A820000000000000000008E80100340000130EE2
-:10A83000020C0280A21B89BC18003600000000F840
-:10A84000730A03F90000641100000030030038F2BD
-:10A85000000016131200004802C080B21800360033
-:10A86000000000F8730A03F90000DC0D9F0100A846
-:10A8700018808ABC9F00DC0D000000A808003692FA
-:10A8800028000C0E0401008082CD81BC0000000075
-:10A890000020017809006E320000161304010080C8
-:10A8A00042A297BC00000E0E8001008032802FB6BD
-:10A8B0003E0016131200002C82CD2EB20000100EA6
-:10A8C0001D010080020000B000007D08000000F8BB
-:10A8D00062812F9500007D088000008002812FB6E4
-:10A8E0002A0016131200002C82CD2EB200007D0823
-:10A8F000000000F802812F940000000000380000E2
-:10A90000C70170340000641100000030030038F209
-:10A910000800170E231901E8762081B93E001613AE
-:10A920001200002C82CD2EB20000190E1D010080F5
-:10A93000020000B000001C0E000000F862812F959C
-:10A9400000001C0E8000008002812FB62A00161322
-:10A950001200002C82CD2EB200000000000000F892
-:10A9600002812F340000161380000080A2802FB6D1
-:10A97000000054100000002CF90100F40000200E2B
-:10A98000120100E802C021B218003600000000F8F1
-:10A99000730A03F9000016131200004802C080B2C7
-:10A9A0000000F603000000F8A2802F9400000000D1
-:10A9B000000000D8028001320000000000300028B2
-:10A9C00008006E3200000000545401FC02C06E32D8
-:10A9D00000C02E0E1801000CA8CD3EB22080000051
-:10A9E000000000280980363200008111000000D8E4
-:10A9F000020000D200002B0E04000080028092BCF6
-:10AA000018000000000000F8730A03392C0E36000D
-:10AA1000000000C00200369218003600000000F866
-:10AA2000738A03F900000000000000D802800132A0
-:10AA300000C02B0E1800000CA8CD3EB200200084F0
-:10AA400000000028090037320000621200000008F0
-:10AA5000E80100F400007D08000000800200009082
-:10AA600000000000000000D8028001320000000059
-:10AA7000545401FC02C06E3200C0370E1801000CA5
-:10AA8000A8CD3EB2208000000000000808803632C9
-:10AA90000000EF031201002C72E02EB2000016132A
-:10AAA00000000080020000900000F3110000002868
-:10AAB000090002F200003F0E0000005C0800009256
-:10AAC00000000000000000D80280013200000000F9
-:10AAD000545401FC02C06E3200C03F0E1801000C3D
-:10AAE000A8CD3EB220800000000000080880363269
-:10AAF000000038120000005C1FC0F5FA0000F303EC
-:10AB000000000080020000900000000000300028DB
-:10AB100008006E320020008400000028090037324F
-:10AB20000000621200000008E80100F40000440E7A
-:10AB300000000080020000900000000000000008FB
-:10AB40000800003200004A0E0400008002C085B2F6
-:10AB500000004A0E80000080F2C185B60000490E58
-:10AB60001C41028006C085B20000000000000068A1
-:10AB700002C5853000000000000000701F00F73A99
-:10AB800000000000000000F822812F340000D00EE9
-:10AB900080010080A2802FB618000000000000F89D
-:10ABA000730A0339D00E3600CA0000C00200369284
-:10ABB0000000990E8001008082812FB60000A10E56
-:10ABC0001F20010809006EB20000990E0430010830
-:10ABD000899B90BC0000560E0431018002006EBCBF
-:10ABE0000000321000000080020000F00000540E4F
-:10ABF0000050014808806E9200001613000000808B
-:10AC00000200009000000000000000042861803C69
-:10AC100000006B0E000000002821809A000016132F
-:10AC20009F000080028090B2000032100030014886
-:10AC300008006EF200005A0E00500104A85B809CD0
-:10AC400000001613000000800200009000000000C9
-:10AC500000500100A81B803A0000680E0700004861
-:10AC600018A084BC0800000000400200189AFE38BA
-:10AC70000000161302010080823A80BC0000161307
-:10AC800006010080923A80BC0000000000000068CD
-:10AC9000020080320000321000000080020000F04C
-:10ACA0000000630E000000800200009000001613F8
-:10ACB00000000080020000900000680E07000048BD
-:10ACC00018A084BC0800000000400200189AFE385A
-:10ACD0000000161302010080823A80BC00001613A7
-:10ACE00006010080923A80BC0000600E00000068FF
-:10ACF0000200809200006B0E0400004818A084BA85
-:10AD0000000016139F000004286180BC00000000B2
-:10AD1000000000002821803A00000000005401FCDF
-:10AD200002C06E320000740E12010060084023B2AF
-:10AD300000820000D6010008088036320300161396
-:10AD400004400200381AFFB8030000000000007839
-:10AD50000960803918000000D241028CE6A19739C1
-:10AD600000000000005001E8068084322900F3034F
-:10AD70001201002C82CD2EB20000161300000080BC
-:10AD8000020000900000161312000024080023B2F5
-:10AD9000000016131200002008C023B20000161392
-:10ADA00012000018088023B200000000000000D844
-:10ADB0000280013200C07F0E1801000CA8CD3EB207
-:10ADC00020800000D6010008088036320000790E8D
-:10ADD00012000038028081B2000016131200003CFD
-:10ADE000020082B20000161312000030024082B24C
-:10ADF00000006E0E12010034020086B2000016132D
-:10AE00000000008002000090080000000040025C8A
-:10AE1000189AFE38000000000000004808000032C8
-:10AE200000000000000000D8020000320000000016
-:10AE30000000000007408032000000000008000011
-:10AE4000070080320000000000100000074082323E
-:10AE500000000000001800000700863200001613F2
-:10AE600012000050F2C138B400000000D60100D832
-:10AE700002800132000000000018000007808132CB
-:10AE800000000000002000000700823210000000D7
-:10AE90000030000017E02C3900008E0E800000808A
-:10AEA000328087B60010008000380000070037327B
-:10AEB00000008F0E0000008002000090001000884B
-:10AEC000003800000700373218003600000000F894
-:10AED000730A03F9000000000000006802C0853218
-:10AEE000000016130201008082FA85BC00001613D0
-:10AEF0000601008092FA85BC0000000000000008F6
-:10AF0000E8010034000016131200004802C080B2AD
-:10AF100018003600000000F8730A03F90000321030
-:10AF200000000080020000F000006B0E00000080B6
-:10AF3000020000900000A10E0000008002000090BE
-:10AF40000000321000000080020000F000009C0EA3
-:10AF500000380200B81B809C0000A10E0000008099
-:10AF600002000090050000000000006802A0FE380A
-:10AF7000050000000000007809A0FE38000016134C
-:10AF80000201008082BA97BC0000161306010080FF
-:10AF900092BA97BC0000990E00400280024068926D
-:10AFA00000000000CA0100D8020000320000A50E17
-:10AFB00004B8018002006EBC000016139FB801782F
-:10AFC000891BEEBC0000000000B801E0861BEE3CCF
-:10AFD0004C000000000000000700363200000000B6
-:10AFE00000000078A9002D37B4040100000800001B
-:10AFF000C78D973A000000000000007899C02C37F8
-:10B00000B400000000000078898D973A0000161304
-:10B010000210000087BF97BA00000000001800006F
-:10B020000740FE320000161312000048F2C138B487
-:10B030000000AD0EB6000080020000B00020161324
-:10B0400012000064A2CD2CB200000000A600008017
-:10B05000020000300000B20E80010080A2802FB6F6
-:10B0600018003600CA0000F8730A03F900007D08D2
-:10B07000005401FC02C06E92000016138001008093
-:10B0800062812FB6000016138001008082812FB6E6
-:10B09000000016131F000080020000B00000000036
-:10B0A000005401FC02C06E320000BB0E12010060B1
-:10B0B000084023B2008200000000000808803632F9
-:10B0C0002900F3031201002C82CD2EB200001613CA
-:10B0D00000000080020000900000161312000024FF
-:10B0E000080023B2000016131200002008C023B28B
-:10B0F0000000161312000018088023B200000000A0
-:10B10000000000D80280013200C0C60E1801000CF9
-:10B11000A8CD3EB220800000000000080880363232
-:10B120000000C00E12000038028081B20000161329
-:10B130001200003C020082B2000016131200003020
-:10B14000024082B20000B90E12010034020086B241
-:10B150000000161300000080020000900000321072
-:10B1600000000048080000F20800C90E0040025C20
-:10B17000189AFE980000161300000080020000904C
-:10B180000000000000500100A81B803A0000810E62
-:10B190000000004808000092000016131F01008004
-:10B1A000020000B000000000005401FC02C06E323A
-:10B1B0000000F31100000028098002F20000AD0E2B
-:10B1C00000000080020000900000F3110000002841
-:10B1D000090002F20000D30E9A0100F862812FB438
-:10B1E00010240000000000F8A28D2F3100000000A4
-:10B1F00000D601EC06C06E342E007D081201002C32
-:10B2000082CD2EB2000016130000008002000090D4
-:10B210000000161304A9018002006EB20000DE0EC9
-:10B2200080010080F2C185B60000DA0E1F40028462
-:10B23000E60100B40000DE0E1D0100F822812FB4EB
-:10B240000000DE0E000000F862812F950000DC0E89
-:10B250001D010080020000B000000000000000F8A6
-:10B2600062812F35000000000040028002406832F9
-:10B27000000016131F010080020000B00000E00E65
-:10B2800004980164881B87BC0000AB120090010881
-:10B2900009006EF20000DF1200000080020000F0E2
-:10B2A000000000000000007809C58530000016137A
-:10B2B0000201008082BA97BC0000161306010080CC
-:10B2C00092BA97BC000016131200006802C585B040
-:10B2D00000000000000000F8D2802F3500007F0839
-:10B2E000370000F8D2812FB400000000000000F801
-:10B2F00072812F343D007F081201002C82CD2EB2C6
-:10B300000000161300000080020000900000F20E02
-:10B3100080010080F2C185B60000EE0E1F4002845D
-:10B32000E60100B40000F20E1D0100F822812FB4E6
-:10B330000000F20E000000F862812F950000F00E70
-:10B340001D010080020000B000000000000000F8B5
-:10B3500062812F3500000000004002800240683208
-:10B36000000016131F010080020000B00000000062
-:10B3700000D401EC16C06E3A000000000000007816
-:10B3800009C58530000016130201008082BA97BCFF
-:10B39000000016130601008092BA97BC0000161335
-:10B3A0001200006802C585B000007F0804B000806C
-:10B3B00002006EBC37007F081201002C82CD2EB235
-:10B3C0000000161300000080020000900000020F31
-:10B3D00080010080F2C185B60000FE0E1F4002848D
-:10B3E000E60100B40000020F1D0100F822812FB415
-:10B3F0000000020F000000F862812F950000000F8E
-:10B400001D010080020000B000000000000000F8F4
-:10B4100062812F3500000000004002800240683247
-:10B42000000016131F010080020000B000000F0F83
-:10B43000000000800200009000000B0F80010080DF
-:10B44000F2C185B60000070F1F400284E60100B478
-:10B4500000000B0F1D0100F822812FB400000B0F1C
-:10B46000000000F862812F950000090F1D01008087
-:10B47000020000B000000000000000F862812F35DB
-:10B4800000000000004002800240683200001613F5
-:10B490001F010080020000B000000F0F370000F80D
-:10B4A000D2812FB400000000000000F872812F3418
-:10B4B0003D000F0F1201002C82CD2EB2000016139A
-:10B4C00000000080020000900000000000D401ECA9
-:10B4D00006000032000000000000007809C5853039
-:10B4E000000016130201008082BA97BC00001613F8
-:10B4F0000601008092BA97BC00007F081201006824
-:10B5000002C585B000001613000000800200009004
-:10B5100000007D0880010080F2812FB600007D08C8
-:10B5200080000080E2812FB60000190F80000080AB
-:10B5300002812FB6000016131D010080020000B02A
-:10B54000000016130458018002C06EBC00007D0884
-:10B55000085901EC06FB6EBC00000000000000D89A
-:10B560000280013200000000545401FC02C06E321F
-:10B5700000C0220F1801000CA8CD3EB20000000050
-:10B58000005801EC06FB6E3A208000000000000825
-:10B59000088036320000EF031201002C72E02EB258
-:10B5A00000001613000000800200009000005D12F1
-:10B5B000000000F8E2812FF40000250F060301804F
-:10B5C00012C06EBC190068060000001C080036920C
-:10B5D0001A0068060000001C0800369200001613CE
-:10B5E00080010080F2812FB60000161380010080D8
-:10B5F000E2812FB60000161304550180B2DB2FBC88
-:10B6000000C00000000000F8A28D2F3100000000F3
-:10B61000000000D802800132002000C00000002895
-:10B6200009003732000000000030002808006E32A8
-:10B6300000000000453000E0060000320000621209
-:10B6400000000008E80100F40000340F040201ECDF
-:10B6500016C06EBC00000000C90100141840813AF9
-:10B6600000000000000000F802802F3400C0340FFA
-:10B6700012010040A28D39B20000161300000080B4
-:10B680000200009018003600CA0000F8730A03F99F
-:10B690000000340F9F010014184081BC00007F0897
-:10B6A0008001008092802FB62B007F081201002CB1
-:10B6B00082CD2EB200001613000000800200009020
-:10B6C000000016131F0100D8028001B20000000024
-:10B6D000005401FC02C06E3200C0440F1801000C7F
-:10B6E000A8CD3EB22080000000000028098036323C
-:10B6F00000008111000000D8020000D20000410FBC
-:10B7000004000080028092BC18000000000000F8D5
-:10B71000730A0339420F3600000000C0020036925F
-:10B7200018003600000000F8738A03F900000000DA
-:10B73000000000D80280013200C0410F1800000C48
-:10B74000A8CD3EB200005D12000000D8024000F219
-:10B7500000F04C0F1D400200A80D68B10000161348
-:10B760000B000080020000B0000016131E4002848F
-:10B77000060000B200004A0F12000028020580B047
-:10B780000800450F000000F8234001990000450F14
-:10B7900012010068020580B000001613000000804E
-:10B7A0000200009000004C0FB5000080020000B0C5
-:10B7B00000000000A50080A0360B6A3500000000E4
-:10B7C0000000005009C02932000000000056012886
-:10B7D00008C06E320000000000000078390B2E32E5
-:10B7E0000000000000000020F38197340000560F95
-:10B7F00004000078D90130B600001613040100805F
-:10B80000328097BC0000000000000000B905303015
-:10B8100018000000000000F803A403390000000035
-:10B8200000000034330B2F3200006F0F040000784B
-:10B83000D90130B60000161304010080328097BC95
-:10B840000000000000000078B905303000005D0FF6
-:10B850000400008042E529BC00000000000000F860
-:10B860000200003218000000000000F8738A02395C
-:10B87000000000000000009C028097320A000000D7
-:10B880000000001009003632000080120000001491
-:10B8900009C029D20000690F25010008080000B284
-:10B8A0000000161380000080F20180B60000000046
-:10B8B0000000002C090580300000161302010080F2
-:10B8C00082FA92BC000016130601008092FA92BC24
-:10B8D0000000670F12000028020580B00800690F01
-:10B8E000000000F8234001990000690F1201006870
-:10B8F000020580B0000016130000008002000090D6
-:10B9000000006D0F0400008002402FBC000000000A
-:10B910000000007809002C32210316130400008077
-:10B92000828D97BC9603161304000080828D97BC0D
-:10B930000000161380000080A2802FB60000560F72
-:10B94000000000F4020000920000730F0400008069
-:10B9500042E529BC00000000000000F802000032AF
-:10B9600018000000000000F8738A0239000000008F
-:10B970000000009C0200953200000000CA0100D8BF
-:10B9800002800132000000000030000007C02C32AD
-:10B99000001000A00038000007003732000000004F
-:10B9A000002000000700EE32000000000038000C0C
-:10B9B00007808232000016131200004802C080B2D5
-:10B9C0000000F60300000008E80100940000930F57
-:10B9D00002000080A24280BC0000930F8000008023
-:10B9E000F2C185B60000930F1F400208B9BF68B0CE
-:10B9F0000000830F80410280E28168B608000000E9
-:10BA00000000001079618039000016139F2001E0CA
-:10BA100016206EBA00000000000000F822812F34CA
-:10BA20001800000000400288E62191390000000063
-:10BA30000001005C08000072000000000000000C23
-:10BA400019A0903A0000930F06010080D2FF90BC2D
-:10BA50000000870F2C410278F98168B400000000D3
-:10BA600000000078B9819734010000000000001048
-:10BA700009003632000080120000001459C085D73A
-:10BA80000300000000400200291AFF3800000000F7
-:10BA900000380200B91B903A00000000D241028831
-:10BAA00016A0973A00000000450000D8024000327E
-:10BAB000000016139F2001E016206EBA000000005F
-:10BAC0000000000007408032000000000008000075
-:10BAD0002724903A000000000010000007008A327E
-:10BAE0000000000012010058F2C138740000161363
-:10BAF00000000080020000900800A20F1A0000342D
-:10BB0000796180B90000AE0F1E010080020000B014
-:10BB10000000AE0F1F400200094068B20000950F00
-:10BB200080000080E20190B6000016133800005437
-:10BB30001F40F5BA0000000000000008B93F903037
-:10BB400000000000002801E026246E3A08001613C9
-:10BB50001E00000009A4FEB83D0000000000001017
-:10BB6000090036320000801200000014090090D253
-:10BB70000000000000000078090590300000161356
-:10BB80000201008082BA97BC0000161306010080F3
-:10BB900092BA97BC0000AE0F12010068020590B087
-:10BBA0000000161300000080020000900000AE0F9D
-:10BBB0008000008082812FB60000AC0F1F41020080
-:10BBC000094068B200000000002801E016206E3A2B
-:10BBD0000000A80F80010080F2C185B600000000BF
-:10BBE00000400284E60100340000000000000080F4
-:10BBF0000200003000000000004002800240683275
-:10BC000000001613380000541F40F5BA0000161348
-:10BC10009F2001E016206EBA0000000000010080A5
-:10BC2000020000700000A30F80000080E20190B6C7
-:10BC30000000970F000000541F40F59A000000001C
-:10BC40000000005C08000032000016139F2001E095
-:10BC500016206EBA00000000000000F822812F3488
-:10BC6000180000001E410284E6619379000016135B
-:10BC700000000080020000900000FFFF0000008034
-:10BC8000020000900000B90F1D5D01EC16C06EBCF3
-:10BC9000000000000F010080020000700000161379
-:10BCA000045D018002C06EBC00001613800000809D
-:10BCB00042812FB600000000000100F8B2802F740E
-:10BCC000000000000F010080020000700000B70FAC
-:10BCD000045E01EC16C06EBC00000000005C01ECCC
-:10BCE00006400032000000000001008002000070E9
-:10BCF0000000FFFF00000080020000900000000034
-:10BD00000420018082DB907C000016130420018057
-:10BD100002006EBC000016131F000080020000B07D
-:10BD200000000000020C0280A2DB907C0000C40F27
-:10BD300006210180821B90BC2700C50F0000000077
-:10BD40000900369228000000000000000900363289
-:10BD5000000000000000008812002C3A0000FFFFE5
-:10BD600000000080020000900600000000000010AB
-:10BD7000090036320000801200000014090092D23F
-:10BD80000000161304000080020092BC00000000B6
-:10BD90002FA00178891B927A0000000006880178A4
-:10BDA000899B977C000000000034020409C06E3DAE
-:10BDB00000000000000C020019A46E370000D20F32
-:10BDC0000200008002A497BC0000D20F0200008095
-:10BDD000020000B00100000000000078898D973754
-:10BDE0000000000002010280829B977C000000009E
-:10BDF000000100F8F2802F740000FFFF00000080B7
-:10BE00000200009000000000DA5B01EC0640ED3219
-:10BE10002D000000000000100900363200008012E2
-:10BE2000005C011409806ED20000DA0F040100806A
-:10BE3000024086BC0000000000A001E016206E3A1F
-:10BE40000000DC0F00D401EC060000920000AB12F1
-:10BE50000090010809006EF20000000000A001E05F
-:10BE600016206E3A0000DF12330100F882802FB4F2
-:10BE70000000DF129FF0018082DB87BC0000DF1230
-:10BE80009FF8018022216EBC0000000000E801E064
-:10BE90000600EE320000000000F001E006C087322C
-:10BEA0000000DF1200000080020000900000FFFF91
-:10BEB00000000080020000900000161308000080BF
-:10BEC000028091BC11000000000000100900363211
-:10BED0001000801200500114A99B91D91500000098
-:10BEE000000000100900363210000000002001148C
-:10BEF000890D6E370000801200300114895B91D2E9
-:10BF00001A00000000000010090036320000801204
-:10BF10000000001409C02DD2000016130621018074
-:10BF2000829B91BC0000000000A8017809006E32DD
-:10BF30000000161306010280829B97BC00000110CE
-:10BF40000421013069246EBC000000000050010093
-:10BF5000A99B913A0000F90F1F400224094068B2E2
-:10BF60000000F00F80000080E24192B60000000067
-:10BF700000000008B97F92300000000000000000BF
-:10BF80002924903C080000000000007899A4FE38A5
-:10BF9000000016130201008082BA97BC000016133D
-:10BFA0000601008092BA97BC0800F00F12010068E9
-:10BFB00092A4FEB80000161300000080020000905A
-:10BFC0000000161304290180821B90BC00000000B1
-:10BFD00000A801E066246E3A000016139F2001E0DD
-:10BFE000060093B20000FE0F8000008082812FB611
-:10BFF0000000FF0F002801E0060000920000000092
-:10C00000003001E00600003200000000005001E8AE
-:10C0100006000032000000000001008002000070F5
-:10C020000000071038510100A99B91BA00000510CB
-:10C0300004410208B9FF68B0000016138041028075
-:10C04000E2C168B60000021000400280024068921F
-:10C05000000014109F3101E066246EBC0000141033
-:10C06000003001E0060000920000111004280104D5
-:10C0700009006EB20000161306500180A25B90BC4E
-:10C0800000000F109F010000192490BC0000000068
-:10C0900000A801E066246E3A00000000002801E0DC
-:10C0A0000624003C00000000005001E806000032B9
-:10C0B000000016139F2001E0060093B2000000006C
-:10C0C000000100800200007000000000002801E074
-:10C0D0000600003200001D1004000080020090BC29
-:10C0E0000000141004410208B9FF68B000001613E4
-:10C0F00080410280E2C168B6000011100040028059
-:10C10000024068920000181002000080222490BCB7
-:10C1100000001D1080400280F2C168B600000000DF
-:10C120000040028CB6C1683500001D10000000F808
-:10C1300022812F940800000000400278399AFE38CE
-:10C14000000016130201008082BA97BC000016138B
-:10C150000601008092BA97BC0800161312400268CC
-:10C16000129AFEB80000111004010000292490BCAE
-:10C17000000000000000000809000032100000006C
-:10C1800000000010790B1638080000000000000CB9
-:10C19000790B1638000016130400008042E490BCAE
-:10C1A0000000000000000004A9002D370004010079
-:10C1B00000000004C94D903A02000000000000A8F1
-:10C1C000820D913700000000000000A812A42A3A56
-:10C1D0000000281080400280E2017CB600001613A7
-:10C1E00004400278B93F7CB0000000000000000865
-:10C1F000E9A5903A00002A109F010010190091BC97
-:10C200009F000000000000100900363200002310DB
-:10C210000401008042E490BC0000000000000078AF
-:10C22000C924903A000016130401008022A497BC90
-:10C230000000000000A801E066246E3A0000000043
-:10C24000005001E806009032000016139F2001E024
-:10C25000060093B2000000000001008002000070A0
-:10C260000000FFFF00000080020000901800341062
-:10C270001F41027888CD68B60000000000000088E9
-:10C2800012002C3A0000371080010080628087B6CF
-:10C290000000161304410280B2FF68B000003210A3
-:10C2A000004002800240689203001613044002001E
-:10C2B000381AFFB8000016131F400204B8FF68B018
-:10C2C0000000000000380200B81B803A2E00000079
-:10C2D0000000001009003632000080120000001437
-:10C2E000090080D200000000000100800200007000
-:10C2F0000000FFFF000000800200009000004510D9
-:10C3000080010080A2802FB60000421012010000C0
-:10C3100009C021B218003600000000F8730A03F9C2
-:10C3200000000000000000D8024084321D004510CB
-:10C330000401008002A417B800003F109F01008094
-:10C34000180088BC00001613000000800200009056
-:10C35000000000000060006C08006E320000000069
-:10C36000CA68004C08006E320000161304700018F2
-:10C3700008006EB2200000000000001009003632F4
-:10C380001000801200000014A96081D90000000094
-:10C3900004000080A2A0817C000016130D01008023
-:10C3A000020000B000004F1080010080E2802FB634
-:10C3B00000004F101B000080020000B000000000D1
-:10C3C0000600008062E0837C000016139F000014CA
-:10C3D000184081BC00000000CA0100F802802F351F
-:10C3E00000A0000012010040A28D39720000161357
-:10C3F00000000080020000900000FFFF00000080AD
-:10C400000200009000000000000801E406C02D3288
-:10C41000EEFF0000001001E0868D2F3100000000CB
-:10C420000000001CB3E4393200005B100400007807
-:10C43000D90130B60000161304010080328097BC89
-:10C440000000000000000078B9053030180000003E
-:10C45000000000F8E3A503390000000000000034EC
-:10C46000330B2F320000000004000078D901307631
-:10C470000000161304010080328097BC0000000009
-:10C4800000000078B905303018000000000100F805
-:10C49000E3A503790000FFFF000000800200009088
-:10C4A000000016130401008002002DBC00001613CA
-:10C4B0000401008002802DBC00000000000000CCC0
-:10C4C00002000032000066102000012C09C06EB28C
-:10C4D00000006710001686CC06C092920000000093
-:10C4E000001486CC06C09232000000001201004009
-:10C4F000628E92520000161300000080020000902D
-:10C500000000FFFF000000800200009000006D109E
-:10C5100004000078D90130B6000016130401008031
-:10C52000428097BC6D103600000000C002003692B9
-:10C530006000161304010080828D2FB100000000FE
-:10C54000000000140300383200000000000000E08A
-:10C55000020030320000B91004000024D80130B6C7
-:10C560007210000000000088824D823A000016130D
-:10C570000000008002000090000016130000008000
-:10C5800002000090000016130000008002000090DE
-:10C590000000161300000080020000906D103600AD
-:10C5A000000000C00200369200009E1000000080D3
-:10C5B0000200009000007A10000000204805309032
-:10C5C000000016130000008002000090000086109A
-:10C5D000921101BC08006EB200000000000801DCEE
-:10C5E00002406E3200007E101F1101E026C18BB5A3
-:10C5F000000086101D000080020000B00000000056
-:10C60000000000D80200003280020000000000009C
-:10C61000070036320000000000000078A9002D3726
-:10C620002005010000080000C78D973A0A000000AD
-:10C6300000000078890D8237000000000010000023
-:10C64000A7BA973A000000000018000007C0EA32BD
-:10C65000000016131200004802C038B200008A1011
-:10C66000800E01BC08C06EB2000000000000000097
-:10C67000190E823200E0921012010048A20D90B211
-:10C68000000016130000008002000090000000006F
-:10C69000000000D802400032B4000000000000009A
-:10C6A000070036320000000000000078A9002D3796
-:10C6B0000004010000080000C78D973A0000000048
-:10C6C0000000007899008237000016130210000065
-:10C6D00087BF97BA00000000001800000740FE3234
-:10C6E0000000161312000048F2C138B418003600DA
-:10C6F000000000F8730A03F90000000000000004C5
-:10C70000896038321D0000000000007809A4173845
-:10C71000000098108000008002C08BB600009910C5
-:10C7200004000080328097BC0000161300000080D7
-:10C73000020000900000161304010080028097BCE4
-:10C740000000000000000018F341903400009E102B
-:10C7500004000078D90130B60000161304010080EF
-:10C76000328097BC0000000000000000B9053030A6
-:10C7700018000000000000F803A4033900000000C6
-:10C780000000000019CE2C32006016131200004089
-:10C79000A20D90B200000000000000D8020000329C
-:10C7A00060000000000000000700363200000000BA
-:10C7B000000000BCA8002D37A00701000008000001
-:10C7C000C7CD8B3A0A0000000000007889CD2C37D5
-:10C7D0008002000000000078898D973A0000000078
-:10C7E00000100000A7BA973A0000000000180000EF
-:10C7F00007C0EA320000161312000040F2C138B43C
-:10C8000018003600000000F8730A03F90000000069
-:10C81000000801DC02406E321D00000000000078BC
-:10C8200009A417380000161304010080028097BC89
-:10C83000000016138010018022016EB60A00B010AD
-:10C840001F01007889CD2CB70000B7101D1001F82A
-:10C8500002006EB2800200000000000007003632C5
-:10C860002005010000080000C7CD8B3A0000000041
-:10C8700000100000A7BA973A00000000001800005E
-:10C8800007C0EA320000161312000040F2C138B4AB
-:10C8900018003600000000F8730A03F900000000D9
-:10C8A000001001F802006E32EEFF16130401008042
-:10C8B000828D2FB000000000000100800200007097
-:10C8C000EEFF161304110180820D6EB0000000000F
-:10C8D000001001F802006E3200000000000901DCC7
-:10C8E00002406E720000FFFF000000800200009016
-:10C8F0000000000000000000090000320E000000EF
-:10C9000000000004894D0D3600000000000000000A
-:10C9100007800B3200000000000800000700903282
-:10C920000000000000100000070036320000C210B6
-:10C930001200004CF2C138B400000000000000807A
-:10C94000020000300000C3101200008002C021B2BB
-:10C950000000000000000000E902903A0000BF1053
-:10C9600004010004194090BC000000000001008098
-:10C97000020000500000FFFF000000800200009055
-:10C980000000D21080010080A2802FB60000CC10E1
-:10C99000120100E802C021B218003600000000F8C1
-:10C9A000730A03F90000D1100400008002802DBC3E
-:10C9B000000016130401008022802DBC0000161315
-:10C9C0009F000080180088BC0000CC10120100E815
-:10C9D00002C021B20000CB100000008002000090D5
-:10C9E00000000000CA0000D8024084320000161384
-:10C9F0000401008002402DBC0000161304000080DA
-:10CA000002802DBC000000000040006C881C833AAE
-:10CA1000000000000048004C0800723200001613AD
-:10CA200008500018C82072BC0000000004000080FC
-:10CA30000240817C00000000000000141840813C8E
-:10CA40000000161302000020880182BA00000000D6
-:10CA5000000000D8020000320000000000000000CA
-:10CA6000070006320000161304010080020036BCE5
-:10CA70000700000000080000774A093900000000A4
-:10CA8000001000000700823200000000CA190000F8
-:10CA9000074082320000161312000040F2C138B481
-:10CAA00000000000000100D8024084720000FFFF77
-:10CAB0000000008002000090000000004D00000017
-:10CAC00067E0833E0000000000080000070080329D
-:10CAD000000000000010000007C0863200000000C7
-:10CAE0000018000007C0843200003C110400002838
-:10CAF000D8A082BC0000161309010080020000B01B
-:10CB00000000000000000018D8A0813C0000FE10CA
-:10CB10000400003CD8E083BC000016130401008030
-:10CB2000028081BC0000EF100400008072802DBCE8
-:10CB3000000016131200005002C038B20000F710B7
-:10CB4000510000D812802D9A0000161312000050D8
-:10CB5000F2C138B418003600000000F8730A03F977
-:10CB60000000F5100400008072802DBC0000161338
-:10CB700080010080A2802FB60000F010670000F84E
-:10CB8000A2802FB500001613120000E802C021B2E7
-:10CB9000000016130401008072802DBC000000000C
-:10CBA000510000D8020000320000FC102A010000F1
-:10CBB000D82080BA0000FB101201000009C021B289
-:10CBC00018003600000000F8730A03F900000000A6
-:10CBD000000000D8024084321D00161304000080BB
-:10CBE00002A417B8000046100060006C08006EF246
-:10CBF0000000E4104D00000067E0839E0000161363
-:10CC000012000050F2C138B418003600000000F8DD
-:10CC1000730A03F91D0005110400008002A417B86F
-:10CC20000000161380010080A2802FB60000FF10C4
-:10CC3000670000F8A2802FB5000016131200000054
-:10CC400009C021B21D0016130401008002A417B808
-:10CC50000800000000400278399AFE3800001613E0
-:10CC60000201008082BA97BC000016130601008002
-:10CC700092BA97BC0800161312400268129AFEB8C6
-:10CC8000000016130B000080020000B000006411C9
-:10CC900000000030030038F200001B111F00006C80
-:10CCA000D8E086BA00003210510000D8020000F22D
-:10CCB00000000F110000003C0840809200001B1192
-:10CCC000000000800200009000001311800100802D
-:10CCD000F2812FB60000131180000080E2802FB691
-:10CCE0000000131180010080328087B60000000030
-:10CCF000000000F8E2802F340000E31004010080FF
-:10CD0000028081BC0000191180010080A2802FB632
-:10CD1000000018111201000009C021B218003600ED
-:10CD2000000000F8730A03F900000000000000D8BA
-:10CD3000024084321D0016130400008002A417B8BC
-:10CD4000000046100060006C08006EF20000E41065
-:10CD50004D00000067E0839E0000201180010080EC
-:10CD6000E2802FB60000401180010080A2802FB623
-:10CD700018003600CA0000F8730A03F91D004011BC
-:10CD80000401008002A417B8000016130000008000
-:10CD90000200009000000000000000A4A8608A3C8F
-:10CDA0000000161304210180825B8ABC000024115C
-:10CDB0002FA8012099226EBA0000C70F0000008042
-:10CDC000020000F00000161306010280821B92BCD4
-:10CDD0000000000000A801E0060092320000000000
-:10CDE000005001E80600003200002911232101E073
-:10CDF000060000B23E0016131200002C82CD2EB2A7
-:10CE000000001613043000E0068082B200003311E7
-:10CE1000042100E0068081B200001613800000802B
-:10CE2000E2802FB60000311180010080A2802FB671
-:10CE3000000030111201000009C021B218003600B4
-:10CE4000000000F8730A03F900000000000000D899
-:10CE5000024084321D0016130400008002A417B89B
-:10CE6000000046100060006C08006EF20000000038
-:10CE7000002000E00680813200000000003C00E855
-:10CE80000640813200000000001000E006C086323B
-:10CE900000000000001800E006C0843200001613F5
-:10CEA0000400008032E186B2000000002A01008008
-:10CEB0000200007000003A111201000009C021B206
-:10CEC00018003600000000F8730A03F91D0016135D
-:10CED0000400008002A417B800000000000100F860
-:10CEE000A2802F75000000000000003CD8E0833CC9
-:10CEF0000000161312000050F2C138B400001613DF
-:10CF000080000080A2802FB600000000000000F822
-:10CF1000A2802F34000000000000008812002C3A8C
-:10CF20000000FFFF000000800200009000000000F1
-:10CF3000000000000900003200000000000000783E
-:10CF40000900003200000000000000A802000032CA
-:10CF5000EE05481104010080820DF6BC00060000B9
-:10CF6000000000080900363200004A1100000004E9
-:10CF700009C00992002800000000000809003632AC
-:10CF80000000000000000004098009321E000000BB
-:10CF9000000060C087CD003700000000000860C0BE
-:10CFA000078097320030000000000078898D2A3A0F
-:10CFB000000016131200005C528197B400000000BC
-:10CFC000000000002924903A0800000000000078CA
-:10CFD000890D903600000000000000041940903CCC
-:10CFE00000000000000000A852822A3A00084A11FE
-:10CFF00002010080828D2ABC00005B1106000080C7
-:10D00000024090BC00001613120000A8020020B2DB
-:10D010001E000000000000C087CD003700000000A7
-:10D02000000800C007809732000016131200005C51
-:10D0300052812AB400000000000000002924903A28
-:10D040000800000000000078890D9036000054119F
-:10D0500004010004194090BC0500000000000078A5
-:10D06000890D903600000000000000A00E8097326D
-:10D070000000161312000068028097B20000000042
-:10D08000000000A40E8097320000000000000000A5
-:10D090002924903A000000000000007859009036E2
-:10D0A00000005D1195010080222490BA000000006C
-:10D0B00000010080020000500000FFFF000000801F
-:10D0C0000200009000007E1104010078D90130B602
-:10D0D000000000000000002809C029320000000004
-:10D0E0000000009CB2452830000070118601000845
-:10D0F00009802FB2000000000000002C094081329E
-:10D1000000000000000000F80200003200000000F3
-:10D11000000000F40200003218000000000000F8D7
-:10D12000738A0239000000000000009C02809232E5
-:10D1300000006F110407018002C06EBC000079116D
-:10D14000C30701ECB6E46E9A00007911000601EC09
-:10D15000B6E46E9A0000161380010080528090B6EB
-:10D16000000000000000002C0905803000000000D5
-:10D17000000000F80200003200000000000000F48F
-:10D180000200003218000000000000F8738A023923
-:10D19000000000000000009C028092320000161384
-:10D1A0000201008082FA92BC000016130601008082
-:10D1B00092FA92BC0000D71100000080020000D05B
-:10D1C000210000000000001009003632000080122B
-:10D1D0000000001409C092D20000000000000030DE
-:10D1E0000300383200007E1104010078D90130B606
-:10D1F000000067110000009CB2452890000000006C
-:10D20000040000802280977C00001613000000803C
-:10D21000020000900000FFFF00000080020000906C
-:10D22000000016130400008002C0E8BC00001613C2
-:10D230000200008002C12FBC000000000000008836
-:10D2400002C0E83202008411B00000A0F20B00B965
-:10D25000000000000000000CABE4B03200008911B7
-:10D2600080010080F24BD0B600000000A000002832
-:10D2700009000032000000000001008002000050A0
-:10D2800000008B1104010080123EF8BA00009611D4
-:10D29000A0000004FD4BD09400009211800100809A
-:10D2A000D28192B600009211800100802281FCB6EA
-:10D2B00000000000A0000004FD4BD034000000007E
-:10D2C0000000008401C02F32000000000000008038
-:10D2D000F1010034000000000000009401C02F3272
-:10D2E0000000961100000090F10100940000000081
-:10D2F000A000008401C02F32000000000000008068
-:10D30000F101F83400000000000000900140F83204
-:10D310000000000000010028090000520000161360
-:10D3200080010080F24BD0B600009C11040100285F
-:10D330000934B0BA0000161380010080F24BD0B659
-:10D3400000009911B0000080020000B00000000051
-:10D35000A0000004FD4BD0350000000000010028B3
-:10D360000900005200009C11B00000A822C02FB795
-:10D3700000001613040084C037ACB0B200000000F7
-:10D38000A000000C0B000032FFFF0000000000783E
-:10D39000A94DB0300000A411800000800240B0B65A
-:10D3A00000001613800000801240B0B6000000009C
-:10D3B00000000078698197350000000000008408B3
-:10D3C0000B007C320000000000000000E725013265
-:10D3D0000042000000080000878D2A3A000000008B
-:10D3E000001000000700B03200000000001800002C
-:10D3F0000700D0320000000012010048F2C138548A
-:10D400000000161300000080020000900000AA1126
-:10D41000B00000A0020000B2000000000000000CFC
-:10D42000ABE4B0320000AF11800100800240D0B602
-:10D4300000000000A00000280900003200000000E9
-:10D4400000010080020000500000B11104010080C2
-:10D45000123EF8BA0000C211A00000040D40D094A2
-:10D460000000BB1180010080D28192B60000BB1188
-:10D47000800100802281FCB600000000A0000004B2
-:10D480000D40D034000000000000007809C02F32A9
-:10D4900000000000000000FC02000032000000005C
-:10D4A0000000008401C02F32000000000000008056
-:10D4B000F1010034000000000000009401C02F3290
-:10D4C0000000000000000090F10100340000C211D3
-:10D4D000000000FC0280979200000000A00000788D
-:10D4E00009C02F3200000000000000FC02000032E2
-:10D4F000000000000000008401C02F320000000086
-:10D5000000000080F101F8340000000000000090ED
-:10D510000140F83200000000000000FC0280973259
-:10D52000000000000001002809000052000016134E
-:10D53000800100800240D0B60000C811040100281C
-:10D540000934B0BA00001613800100800240D0B642
-:10D550000000C511B0000080020000B00000000013
-:10D56000A00000040D40D03500000000000100289C
-:10D57000090000520000C811B00000A8020000B26B
-:10D5800000001613040084C037ACB0B200000000E5
-:10D59000A000000C0B000032FFFF0000000000782C
-:10D5A000A94DB0300000D011800000800240B0B61C
-:10D5B00000001613800000801240B0B6000000008A
-:10D5C00000000078698197350000000000008408A1
-:10D5D0000B007C320000000000000000E725013253
-:10D5E0000042000000080000878D2A3A0000000079
-:10D5F000001000000700B03200000000001800001A
-:10D600000700D0320000000012010048F2C1385477
-:10D610000000161300000080020000900000FFFFD1
-:10D6200000000080020000900000D9111C40028020
-:10D6300006C092B244000000000100F8A28D2F52F3
-:10D64000000000000000007809C5923000001613A9
-:10D650000201008082BA97BC000016130601008008
-:10D6600092BA97BC000016131200006802C592B06F
-:10D67000000016130B000080020000B02400000020
-:10D680000000001009003632000080120000001473
-:10D6900009C092D200000000000100701F00F75A7C
-:10D6A0000000FFFF00000080020000902C0000003E
-:10D6B0000000001009003632000080120000001443
-:10D6C000098092D200000000D50800000780923245
-:10D6D000000000000030000007C02C320040008035
-:10D6E000003800000700373200000000CA4101E0A6
-:10D6F00006809232000016131200004802C080B269
-:10D700000060000000010008088036720000FFFF82
-:10D7100000000080020000900000161380000080CE
-:10D72000A2802FB6000016130401008062802DBC79
-:10D730000000000000380000078092320000000066
-:10D740000030000007C02C3200000000CA3D000C71
-:10D7500007808332000000001201004802C080727E
-:10D760000000161300000080020000900000FFFF80
-:10D7700000000080020000900000000004570180BB
-:10D7800002C06E7C00000000005701EC068092721F
-:10D790000000FFFF00000080020000900000641104
-:10D7A00000000030030038F23300000000000010D9
-:10D7B00009003632100080120000001419A02CD984
-:10D7C0000000FB119D11020C09006EB20000FC115B
-:10D7D00000F0011C09006E920000000000B8011C5E
-:10D7E00009006E320000FE112CCD011809806EB2C6
-:10D7F000000000000000000CC9C1903400000212BB
-:10D800003B29020409806EB20000161380D6018005
-:10D8100052C06EB60000000000D601EC56C06E3457
-:10D82000000000000000000CB9C19034000012128A
-:10D8300000A8010809006EF2000006129D01008098
-:10D8400017E090BA000000000030008007C091325D
-:10D8500000000912003800800700EE920000091253
-:10D860000401008002C091BC0000000000B801E08B
-:10D870000600EE3200000000007001E00600863273
-:10D8800000000C123908008007C085B20000161392
-:10D8900080000080C2812FB600000000D9C901E8D5
-:10D8A0000680913200000000C811008007409032CD
-:10D8B00000000F123B210080070086B2000000002C
-:10D8C000DB0000601800863A00000000587801E094
-:10D8D0001620863A000000000029008007008572AB
-:10D8E0000000FFFF00000080020000900000161200
-:10D8F000020C0280A29B90BC000000000000027895
-:10D9000029006E360000161202000080E2A590BCCD
-:10D91000000000000000000809000032000018129A
-:10D920009F89017849216EBC00000000000000784A
-:10D93000090000320000000000000008E9A5903F47
-:10D9400000001E1204200208899B90BE0000000007
-:10D95000000A0258B89B90360000000000000078D2
-:10D9600049A1903A000000009F880180829B977C2B
-:10D9700000000000008901E00680977200000000AE
-:10D98000000B0258B89B90760000FFFF000000805B
-:10D99000020000900000271280010080A2802FB6B4
-:10D9A000000025121201007809C021B218003600CB
-:10D9B000000000F8730A03F9000016130401008048
-:10D9C00002802DBC00002712CA0000D802408492B9
-:10D9D0001500161304010078E96517B8000000006F
-:10D9E000000000F8A2802F3500001613040100800B
-:10D9F00002402DBC000016130400008002802DBCE4
-:10DA0000000000000040006C881C833A0000000009
-:10DA10000048004C0800723200001613085000182D
-:10DA2000C82072BC000000000600008062A0827C5A
-:10DA3000000016139F000014184081BC000016134C
-:10DA400002000020880182BA00000000000000D817
-:10DA50000200003200000000000000000700063253
-:10DA60000000161304010080020036BC070000000D
-:10DA700000080000774A093900000000001000008B
-:10DA80000700823200000000CA19000007408232FD
-:10DA90000000161312000040F2C138B4000000006C
-:10DAA000000100D8024084720000FFFF00000080E7
-:10DAB000020000902B000000000000100900363228
-:10DAC000000080120000001409C085D2000042123C
-:10DAD00080010080F2C185B600003E121F40028422
-:10DAE000E60100B4000042121D0100F822812FB4AB
-:10DAF00000004212000000F862812F9500004012E1
-:10DB00001D010080020000B000000000000000F8CD
-:10DB100062812F3500000000004002800240683220
-:10DB2000000016131F010080020000B00000161351
-:10DB30001200006802C585B00000000000000078F7
-:10DB400009C58530000016130201008082BA97BC17
-:10DB5000000016130601008092BA97BC0000000076
-:10DB60001D00008002000070010000000401008020
-:10DB7000A28D2F702A0016131200002C82CD2EB217
-:10DB800000000000000100F802812F740000FFFF78
-:10DB9000000000800200009080A8000004000080C7
-:10DBA000828D2F700000521280010080D2802FB62B
-:10DBB000000016138000008072812FB60000521200
-:10DBC00004B0008002006EBC00000000000000F8FD
-:10DBD00072812F343D0055121201002C82CD2EB2DD
-:10DBE0000000161300000080020000900000551293
-:10DBF00080010080F2802FB63C0058121201002CE8
-:10DC000082CD2EB2000016130000008002000090AA
-:10DC10000000581280010080B2802FB63500161324
-:10DC20001200002C82CD2EB200000000000000F88F
-:10DC300042812F348000000004000080828D2F700C
-:10DC40000200000004010080A28D2F703B0016131B
-:10DC50001200002C82CD2EB200000000000100F85E
-:10DC600012812F740000FFFF00000080020000906E
-:10DC70000000161380000080A2802FB6000016134B
-:10DC800004310280A2DB2CBC08000000001801E86F
-:10DC900076208139EEFF0000000100F8828D2F719F
-:10DCA0000000FFFF000000800200009000006612EC
-:10DCB0000000013808C06EF20000000012010048A8
-:10DCC00002C0807200001613000000800200009065
-:10DCD0000000FFFF00000080020000900E00000026
-:10DCE00000000010090036320000801200380114D4
-:10DCF00009006ED200006A120438017809006EB281
-:10DD000000000000003801E0060000320000161399
-:10DD100080000080A2802FB600000000CA11000021
-:10DD20000780823200006E122E190000078097B221
-:10DD30000000000000000028E98192340000731206
-:10DD40002731000007C02CB200000000D5080000F9
-:10DD50000700873200000000C7000028E9809234E5
-:10DD600000000000004001E00600873200000000D3
-:10DD700000000008D8818034100000000039000045
-:10DD8000E7A092790000FFFF0000008002000090F1
-:10DD9000140000000000001009003632000080125C
-:10DDA00000000014094090D2000016131200004435
-:10DDB00012E438B218003600000000F8730A03F9C4
-:10DDC00000007D120401008002802DBC00001613AB
-:10DDD00080010080A2802FB600007812670000F852
-:10DDE000A2802FB500001613120000E802C021B275
-:10DDF000000016130401008072802DBC000000009A
-:10DE0000000100D8024000720000FFFF0000008007
-:10DE1000020000901B00000000000010790A9139F8
-:10DE20000F00000000000010390B91390C000000B9
-:10DE300000000010590A913909008312F101001005
-:10DE4000690B91B903000000002486A8828D6C370D
-:10DE500000000000000088E0070091320000000090
-:10DE6000000088E00740913200C089120201008062
-:10DE7000828D2ABC00008A12E12486C80600009226
-:10DE800003000000E12486C8868D2A3600000000C9
-:10DE900000010080020000500000FFFF0000008031
-:10DEA000020000900000921204300080829B81BC2E
-:10DEB000000016130D010080020000B000001613D0
-:10DEC0009F3C001428806EBC000016138000008068
-:10DED000A2802FB600000000CA0100F802802F3592
-:10DEE00000A0161312000040A28D39B20000941257
-:10DEF00080390080E2806EB6000016138038008002
-:10DF0000F2806EB600C0161304010080A28D2FB0FF
-:10DF100000C09A1204380078898D6EB010009A12F1
-:10DF20009F0100F8E2A52FB900001613040000803D
-:10DF300002C0EEBC00000000005801EC06C0EE324A
-:10DF4000000000000000008002000030000000001F
-:10DF50000428001809006E720000E30F0000008022
-:10DF6000020000F00000C70F00A8012009006E9217
-:10DF70000000FFFF00000080020000900000A712D8
-:10DF800004B00080829B81BC000016130D0100804C
-:10DF9000020000B0000016139FBC001428806EBC65
-:10DFA0000000161380000080A2802FB60000161318
-:10DFB00080B8008082806EB60000000000B800E8E3
-:10DFC00086806E3400000000CA0100F842802F35C0
-:10DFD00008A0000012010040A2CD39720000161303
-:10DFE00000000080020000900000161380B800803E
-:10DFF00082806EB60000000000B800E886806E34B3
-:10E000000000000000010080020000700000FFFF1F
-:10E0100000000080020000902800000000000010B6
-:10E02000090036320000801200000014098090D2EE
-:10E030000000B01233CD01BC08806EB20000EE12B9
-:10E04000000000282922EEDC0000B512000000804C
-:10E05000020000900000B51204B8012809006EB259
-:10E060000000B5129F710180C2216EBC0000161322
-:10E070009F000028A924EEBC0000EE12000000283A
-:10E08000198092DF000000000000008002000030D4
-:10E090000000C91202810180829B90BC000016130F
-:10E0A00004000080028090BCEE05C112060C0280C4
-:10E0B000828D6EBC00904C0000000084020037325C
-:10E0C0000000BB12B8010080020000B00000B912CD
-:10E0D000000000800200009000000000000000C46A
-:10E0E000038090320000000000B001E096216E3CF9
-:10E0F00000000000619801E0060087320000000087
-:10E1000000D401EC0600003200000000A8000078F6
-:10E1100049403C370000CE1200000008E9A5909A63
-:10E120006089200000000084020037320000C41221
-:10E13000B8010080020000B00000C21200000080A0
-:10E140000200009000000000000000C40380903234
-:10E150000000000000B001E096216E3C00000000CD
-:10E16000619801E0060087320000000000D401EC55
-:10E17000060000320000CE12A8000008198F909A05
-:10E18000000000000000007899A1893E0000000016
-:10E1900000000008E9A5903A0000000000B001E08E
-:10E1A00096216E3C00000000619801E00600873275
-:10E1B0000000000000D401EC060000320000D11283
-:10E1C0000600008072A290BC00C0FF3F008001E00A
-:10E1D00006003732000000000000000809C0893244
-:10E1E0000000D61204790180821B87BC0000D41283
-:10E1F00004B0008002006EBC0000D912D99001E08A
-:10E20000068090920000DC128000008052812FB6C0
-:10E210000000DC12D54101E0060087920000D9120F
-:10E220003C9001E0068090B200001613800100804F
-:10E2300092812FB60000000000C801E806C08B32B2
-:10E24000000000009501008002802F720000DD12A6
-:10E250009F410180821B87BC0000000000010080FC
-:10E260000200007000000000D99001E006809032AA
-:10E2700000000000000100F872802F740000FFFF12
-:10E280000000008002000090270000000000001045
-:10E29000090036320000801200000014094087D2C5
-:10E2A0000000E7129FD8018022216EBC0000000010
-:10E2B0000B010080020000700000E7129FE0018067
-:10E2C000C2216EBC000000000B0100800200007043
-:10E2D0000000E7129FB00180D2216EBC0000000058
-:10E2E00000010080020000700000E9120668018051
-:10E2F000825B87BC00000000006801E006408732B6
-:10E300000000EB1237B001E0064087B200000000C9
-:10E31000000000F8D2802F340000000000D801E097
-:10E32000068084320000000000E101E006008772F0
-:10E330000000FFFF000000800200009000001613A4
-:10E3400008000080028092BC0000FB1204C101841E
-:10E3500002006EB20500000000C001E8868D923711
-:10E360000300000000C401E8868D92370000000021
-:10E3700000000080020000300300000000C0012CFB
-:10E38000898D6E360000000000C4012CA9DB923A92
-:10E39000000000000000002C29C0923600000000A0
-:10E3A0000000002C19FB923F000000000000002834
-:10E3B0002980923A000000000000002CA9E4923F5E
-:10E3C000000000006FCC01E826FB923E0000000038
-:10E3D00000B901E0060000520000000000000094B7
-:10E3E000028092320000000000C001E006402832A6
-:10E3F000100000006FCC01E886CD2A360000000036
-:10E4000000B901E0060000520000FFFF000000809C
-:10E41000020000900000161304B0008002006EB2EB
-:10E4200000000000009001BC08006E3200000000F7
-:10E4300000B001BC88DB8B3E00000000009801BCEE
-:10E4400088DB8B3A00000C139F0000BC88E18BBC7A
-:10E4500000000C13040C0240A8DB8BBE000000007F
-:10E4600000B00004881B843E0000091304B1008042
-:10E47000825B80BC00000000000100F8C2802F74A5
-:10E4800000000000040C0280A25B807C00000C13E2
-:10E490000468017819006EB60000000002000080D8
-:10E4A000E265807C2900000000000010090036327F
-:10E4B000000080120000001409C08BD20000000090
-:10E4C0000000008812002C3A0000FFFF00000080CE
-:10E4D000020000900000161304310280A2DB2CBC65
-:10E4E0000000161380000080A2802FB608000000F4
-:10E4F000001C01E876208139EEFF0000000100F8E1
-:10E50000828D2F710000FFFF00000080020000904C
-:10E5100000001613000000B40F40FB940000000040
-:10E52000000000880F402B32000000000000009027
-:10E530000F00283200000000000000940F00293274
-:10E5400010000000000000B85F461839FF0000000E
-:10E550000000009C0F003632000000000000009C0C
-:10E560005FCAF935000000000000004403C0F93222
-:10E5700000000000000000E4030000324100001031
-:10E58000000000E00300373200000000000000E45B
-:10E590000300003240000010000000E003003732AA
-:10E5A00000002513670000980F802AB200000000C9
-:10E5B000000000A8020000320000231312C186E010
-:10E5C00007C021B20000000000B886C006802A32D1
-:10E5D0004C420000000000A8020036322713381415
-:10E5E000000000B00F003692000000000000009C08
-:10E5F0000200003200012414000000AC0F0036D2EB
-:10E6000000000000000000AC0F802A320020000053
-:10E61000000000A802003632000000000000009C4C
-:10E620000F007E3200000000000000A00F007E32CC
-:10E6300000000000000000A40F007E320000000077
-:10E64000000000A80F007E3200000000000000A8BB
-:10E6500002C0FA3200000000000000E007C0F932FA
-:10E6600000000000000000E00700FA320000000097
-:10E67000000000E00740FA3200003B13000000E019
-:10E680000780FAD200000000000000E00780FB32A3
-:10E6900001006213040100B48F4DFBB002000000C2
-:10E6A000000000A002000039408000000000000CC3
-:10E6B000ABCDB032100000000000000C5BCAB039D6
-:10E6C000000000000000000C2BFEB03200006114BE
-:10E6D000000000800200009000000000000000F830
-:10E6E0000300013200000000000100E007803F52FB
-:10E6F00018000000000000F8738A023900000000D2
-:10E7000000000044530A1635000000000000009C81
-:10E710000F80963200000000000000A00FC096326B
-:10E7200000000000000000A40F009732A260030068
-:10E730000000005803003732481300000000005C5E
-:10E74000030036320000000000000050830D00344A
-:10E750000000000000000048830D003400000000AD
-:10E7600000000044530A003400003600000000801E
-:10E7700002000090000000000000006809C0F932AB
-:10E78000000000000000006C0900FA3200000000E8
-:10E79000000000700940FA3200005A1300000080A7
-:10E7A0000200009002000000000000A0F20B0039FF
-:10E7B00000004F13800100801240B0B6000000003E
-:10E7C000000000043B40B0330000000000000004E3
-:10E7D000FD4BD035000053130000000C0B00979246
-:10E7E00002000000000000A0F20B003900005313EB
-:10E7F000000000046B01979400005313120000689E
-:10E80000094020B2000054131200006C094020B2ED
-:10E810000D000000000000FCA2E5163800005913AE
-:10E820009F000080028096B200000000000000708F
-:10E8300009C0963200005A130000006C09C0FD9216
-:10E840000000591312000070094020B200000000BF
-:10E850000000009C0200003200000000000000D810
-:10E860000200003202005313040100BCAF2517B8A8
-:10E8700006005113040000BCAF6516B800004C132D
-:10E880000400008022C0FBBC00006A13040000806A
-:10E8900012C1FBBC200053130401008082CDFBBCDD
-:10E8A00002000000000000A0F20B003900006B1312
-:10E8B00000000080020000D0641300000000008807
-:10E8C00082CDF93A00005A14000000800200009046
-:10E8D00000009313000000800200009000009413D9
-:10E8E00000000080020000900000981300000080EB
-:10E8F000020000900000A0130000008002000090C1
-:10E900000000F91300000080020000900000531383
-:10E91000000000DC0F0097920000000000000000E3
-:10E920000700033240420000000000A80200363217
-:10E93000000000000008000007802A3200000000EC
-:10E9400000100000070097320000000000180000CF
-:10E9500007C096320880701312000040028036B261
-:10E960000000000000000080020000300000721370
-:10E970001200009C0FC021B21D007513040000801E
-:10E9800072BE17B800007213000000F81E80EF9AE4
-:10E99000130000000000009C7FBE173800007813B1
-:10E9A0000400008012C0F9BC00007213000000F8DF
-:10E9B0001E80EF9A000000000000009C0F007E32D5
-:10E9C00000000000000000A00F007E3200000000E8
-:10E9D000000000A40F007E320000000000010000D3
-:10E9E0000700FA52000000000000009C0200003204
-:10E9F0004C420000000000A8020036320000000077
-:10EA00000008000007802A3200004E140000008039
-:10EA1000020000D00000521400000080020000D06C
-:10EA2000000000000000000CCBC1B034000000006A
-:10EA30000000009C0200003200000000000000D82E
-:10EA400002000032000081110000002809C0B0D28D
-:10EA50000000821304000080028092B2000086133E
-:10EA60001200009C0FC021B21D0089130400008019
-:10EA700072BE17B800008613000000F81E80EF9ADF
-:10EA8000130000000000009C7FBE173800008C13AC
-:10EA90000400008012C0F9BC00008613000000F8DA
-:10EAA0001E80EF9A02008E13040100B48F4DFBB05C
-:10EAB00000005313000000800200009008000000D6
-:10EAC000000000F89340013900000000000000B48D
-:10EAD0001F40FB35FE0000000000004803003632F6
-:10EAE0000000000000000044030000340000821316
-:10EAF0000000000C8BC1B09400005E140008000000
-:10EB00000740FA9200004E14000800000740FAD2B5
-:10EB10000880951312000050028036B20000531492
-:10EB200000000080020000D000006014000000809F
-:10EB300002000090000800000000009C0F00363228
-:10EB400000040100000000A80200373200000000AD
-:10EB5000000000A00200003200000000000000E001
-:10EB60000700B03200000000000000A012002A3AA6
-:10EB700000009B130401009C1FC0F9BC00040100AD
-:10EB8000000000A80200373202005D14000000A05F
-:10EB9000F20B00990000A813040100800240FAB2B1
-:10EBA00000040100000000A8020037320000AA1390
-:10EBB00000000080020000D00000B71300000084B5
-:10EBC000020000D200000000000000E007C03C325C
-:10EBD0000000A4138E010080024028B2000401004E
-:10EBE000000000A40F0037320000931300000080E3
-:10EBF0000200009000040100000000A4CF4DFA3A8A
-:10EC0000000093130000008002000090000000004C
-:10EC10000000009C0F00003210000001000000AC5A
-:10EC20000F0037320000BC1300000080020000D04B
-:10EC30000800AC130401008082CDF9BC0000000084
-:10EC40000000009C0F0000320E000001000000AC2C
-:10EC50000F0037320000BC1300000080020000D01B
-:10EC60000B00B0130401008082CDF9BC200000002D
-:10EC70000000009C0F0036320F000001000000ACC5
-:10EC80000F0037320000BC1300000080020000D0EB
-:10EC90002700B4130401008082CDF9BC00000000FD
-:10ECA0000001008002000050000000000000009CF5
-:10ECB0000F0000320F000001000000AC0F003732DF
-:10ECC0000000BC1300000080020000D02000B91337
-:10ECD0000401008082CDF9BC00000000000100802A
-:10ECE0000200005000000000000000E403C0F93200
-:10ECF0000D000001000000E00300373200000000BA
-:10ED0000000000E003C0FA3200000000000000E054
-:10ED100007403E32000000000001009C1FC0F95A6D
-:10ED200000000000000000E003C0F9320000000015
-:10ED3000000000E007403E32000000000000009CA0
-:10ED40001FC0F93AFF000000000100AC8FCDF95060
-:10ED5000000000000000009C0FC02F3200000000E7
-:10ED6000000000FC0200003200000000000000E093
-:10ED700007803E3200000000000000FC12C02F3A65
-:10ED80000F00C7130401008082CD2FBC00000000DB
-:10ED9000000000E007803E3200000000000100FC9F
-:10EDA00002C0F95200000000000000E007003A3203
-:10EDB00000000000000000E007403A3200000000C0
-:10EDC000000000E007803A3200000000000000E090
-:10EDD00007C03A32000000000000009C0FC02F3234
-:10EDE00000000000000000FC0200003200000000F3
-:10EDF000000000E007003D3200000000000000E0DD
-:10EE000007403D320000D213830100FC12C02FBA2C
-:10EE100000000000000100FC02C0F95200000000E8
-:10EE20000000009C0F0000320C00000000000008F1
-:10EE3000733E003900000000000000E0070030329F
-:10EE4000000000000000009C1FC0F93A7000D713BA
-:10EE50000401008082CDF9BC000000000000000C1D
-:10EE60000300003200000000000000E00700303224
-:10EE7000000000000000001003000032000000004D
-:10EE8000000000E007003032000000000000009C9D
-:10EE90000F00003200000000000000A00FC0293267
-:10EEA000000000000000009C02C0F93200000000D9
-:10EEB000000000A40FC02C32000000000000009CE5
-:10EEC0000200FA32180000000000002C737EFA39AC
-:10EED00000000000000000E0070030320000E013F6
-:10EEE0008501009C1FC0F9BA0000000000010080ED
-:10EEF00002000050010000010000009C0F003732AA
-:10EF00000000C11300000080020000D00E00EF13CB
-:10EF10000401008082CDFABC00000000000000E087
-:10EF20000700003200000000000000E0070000328F
-:10EF300000000000000000E0070000320000E913BC
-:10EF40000000009C3FC0F99A1C00E91304010080F6
-:10EF500082CDFABC0200C1130000009C8FCDF9DA0B
-:10EF600000000000000100800200005001000002CB
-:10EF70000000009C0F0037320000C1130000008029
-:10EF8000020000D00E00F7130401008082CDFABC0D
-:10EF900000000000000000E0070000320000F31352
-:10EFA0000000009C1FC0F99A2600F31304010080A2
-:10EFB00082CDFABC00000000000100800200005079
-:10EFC00000000000000000A80F40293200040100EA
-:10EFD000000000A8020037320000E81300000080A3
-:10EFE000020000D00000F21300000080020000D0F8
-:10EFF0000000C51300000080020000D000000000E7
-:10F00000000000E00780183200000000000000E06F
-:10F0100007401A3200000000000000E007001A322A
-:10F0200000000000000000E007801A32000000002D
-:10F03000000000E007C01A3200000000000000A03D
-:10F040000F000032A26003000000005803003732B6
-:10F050000B1400000000005C0300363200000000CA
-:10F060000000009C0F802A3200000B140400008076
-:10F07000024029B20000000000000050833E00342E
-:10F080000000000000000048833E00340000000043
-:10F0900000000044530A003400000C1400000088F3
-:10F0A0000F402B9200000000000000900F0028325B
-:10F0B00000000000000000940F0029320000000052
-:10F0C000000000980F802A3200000000000000A815
-:10F0D00002C0F93211143814000000B00F0036924B
-:10F0E0000700141404000080824D29BC00000000B9
-:10F0F000000000A01F00FA3A000008140000009C65
-:10F100000F802A92C0010000000000AC0F003632D0
-:10F11000010000000000009C0200363200002414B0
-:10F1200000000080020000D01F001A1404000080BC
-:10F1300082CD29BCC0000000000000AC8FCDFA3A9F
-:10F14000000016140000009C12C0299A0000D6137B
-:10F1500000000080020000D00000CC1300000080FE
-:10F16000020000D00000221404000080528AFABC81
-:10F17000A260030000000058030037322214000090
-:10F180000000005C03003632000000000000005068
-:10F19000A33E00340000000000000048A33E0034FD
-:10F1A0000000000000000044530A00340004010085
-:10F1B000000000A40F00373200009313000000800D
-:10F1C0000200009000000000000000C402C0FA32FB
-:10F1D000030000000000009C0F0036320000000019
-:10F1E000000000BC0F402F3200002B140400009CD4
-:10F1F0001FC0F9BC00002A140400008002402FB296
-:10F2000000002714000000E007002C9200002714E3
-:10F21000000000E00700369200000000000000E05F
-:10F2200007402C3200000000000000E007802C3274
-:10F2300000000000000000E007C02C3200000000C9
-:10F24000000000E007002D3200000000000000E098
-:10F2500007402D3200000000000000E007802D3242
-:10F2600000000000000000E007C02D320000000098
-:10F27000000000E007C0FB3200000000000000E0DA
-:10F2800007802F3200000000000000E007C02F328E
-:10F2900018000000000000F8730A023900000000A6
-:10F2A000000100E007803F52FF0000000000004422
-:10F2B0000300363200000000000000E00700F932D1
-:10F2C00000000000000000E00740283200000000BD
-:10F2D000000000E00780F832030000000000009CFE
-:10F2E0000F00363200000000000000BC0FC02B32BF
-:10F2F000000041140400009C1FC0F9BC0000401431
-:10F300000400008002C02BB200003D14000000E0A9
-:10F3100007C0289200003D14000000E0070036926C
-:10F3200000000000000000E00740F932000000008B
-:10F33000000000E00740293200000000000000E06B
-:10F340000780293200000000000000E007C02932D9
-:10F3500000000000000000E007002A32000000006A
-:10F36000000000E007402A3200000000000000E03A
-:10F370000780F93200000000000000E007C02A32D8
-:10F3800000000000000000E007C02F320000000075
-:10F39000000000E007402B3200000000000000E009
-:10F3A00007802B3200000000000000E007C0FB32A5
-:10F3B00000000000000000880200FB320000000096
-:10F3C0000000009C0200003200000000000000D895
-:10F3D0000200003200000000001000000700973219
-:10F3E000000000000019000007C096520880521467
-:10F3F00012000048028036B20000000000000080C9
-:10F4000002000030000054141200009C0FC021B212
-:10F410001D0057140400008072BE17B80000541479
-:10F42000000000F81E80EF9A130000000000009C0E
-:10F430007FBE1738000000000400008012C0F95C95
-:10F4400000005414000000F81E80EF9A0000000035
-:10F45000000000B40F40FB35000000000000009CDD
-:10F46000020000324C420000000000A802003632C8
-:10F47000000000000008000007802A3200004E143F
-:10F4800000000080020000D0000052140000008044
-:10F49000020000D0000000000000000CCBC1B0341E
-:10F4A000000000000000009C02000032000000008C
-:10F4B000000000D80200003200006B140000002899
-:10F4C00009C0B0D20000611404000080028092B232
-:10F4D000000065141200009C0FC021B21D006814CA
-:10F4E0000400008072BE17B800006514000000F828
-:10F4F0001E80EF9A130000000000009C7FBE1738AA
-:10F50000000053130400008012C0F9BC0000651411
-:10F51000000000F81E80EF9A00000000000000FCD0
-:10F520000200003202000000000000A0F20B0039CF
-:10F5300000006F14040100280934B0BA0000000074
-:10F54000000100280900005200000000000000A88F
-:10F5500022C02F3700000000000084C037ACB0325A
-:10F56000000000000000000C0B000032FFFF000054
-:10F57000000000C0AF4DB030000075148000008066
-:10F580000240B0B600000000000000C06F01FC3572
-:10F590000000000000000000073F013200420000B0
-:10F5A00000080000878D2A3A0000000000100000CB
-:10F5B0000700B03200000000001800000700D03241
-:10F5C00000000000000000C03FC13834000000000F
-:10F5D00012010048F201FC5400007A14000000807F
-:10F5E000020000900000FFFF000000800200009079
-:0CF5F000000036000000008002000090C7
-:00000001FF
+++ /dev/null
-:10000000020000005CD300000C00000000000000B3
-:10001000FF1F00000100000000000088824D293A07
-:100020000000400300000080020000900000090072
-:100030000000008002000090000009000000008025
-:100040000200009000000900000000800200009003
-:10005000000009000000008002000090000009007C
-:1000600000000080020000900000090000000080F5
-:1000700002000090000009000000008002000090D3
-:10008000FEFF0000000000AC020036320000360027
-:10009000000000A80200009200003610000000805E
-:1000A0000200009000003610000000800200009066
-:1000B00000003610000000800200009000003610A2
-:1000C0000000008002000090000036100000008058
-:1000D0000200009000002000000000D80F8028924D
-:1000E00000002100000000D80F80289200002200AC
-:1000F000000000D80F80289200002300000000D8E4
-:100100000F402B9200002400000000D80F8028929E
-:1001100000002500000000D80F8028920000260073
-:10012000000000D80F80289200002700000000D8AF
-:100130000F80289200002800000000D80F8028922D
-:1001400000002900000000D80F80289200002A003B
-:10015000000000D80F8028920000360000000098B0
-:100160001E80E99A00002C00000000D80F80289221
-:1001700000002D00000000D80F80289200002E0003
-:10018000000000D80F80289200002F00000000D847
-:100190000F80289200003000000000D40F00009271
-:1001A00000003000000000D40F400092000030003A
-:1001B000000000D40F80009200003400000000D442
-:1001C0000FC0009200003000000000D40F00019228
-:1001D00000003000000000D40F4001920000300009
-:1001E000000000D40F80019200003000000000D415
-:1001F0000FC0019200003000000000D40F000292F6
-:1002000000003000000000D40F40029200003000D7
-:10021000000000D40F800292000036100000008021
-:100220000200009000003000000000D40F00039294
-:1002300000003000000000D40F40039200003000A6
-:10024000000000D40F80039200003000000000D4B2
-:100250000FC0039200000000000000D05F3F003498
-:10026000000036100400008042FFFCB000000000D7
-:10027000000000881280FD3A000036100000008067
-:10028000020000903610361002010080828DFDBC05
-:1002900000000000000000881280FD3A000000000D
-:1002A000000000F803C001323800000000010084A3
-:1002B000824D281A000036000000007409400092A8
-:1002C00000004F00000000FC020000920000480007
-:1002D000000000800200009000004D00000000902F
-:1002E0000E80189200008F020000000008C02092CB
-:1002F00000007F00000000000800219200008D0235
-:10030000000000000840219200007C000000000076
-:10031000088521900000F202000000EC02C0229249
-:100320000000CE0300000080020000900000560094
-:10033000000000FC0240189D00005100000000D0A9
-:1003400002000092000020030000008002000090E4
-:100350000000361000000080020000900000000045
-:10036000000100800200007000004C00000000004E
-:1003700009C0219200004A0012010000088522B045
-:1003800018003600000000F8738A0299000084000B
-:100390006A000080020000B008008400000000F83D
-:1003A0002340019900000000000100E80200907263
-:1003B0000000361080010080B200E9B600003E0364
-:1003C0000000007C1EC0E79A08000000000000F852
-:1003D000134001390000320300000008B801009406
-:1003E000000036100300007809401ABD000000002C
-:1003F000000000A0E125003408000000000000F823
-:10040000B340013900003E03B20000D8020000B240
-:1004100000004005001001F802006E920000590033
-:100420000A0100CC020000B200006A00030100FCD7
-:10043000024019BD08003E03000000F8A3400199E6
-:10044000000000000000008401C02F320000000006
-:1004500000000090F1010034000000000000009452
-:1004600001C02F3202005C00B00000A0F20B00B906
-:1004700000005F000401008002C0B0BC0000680002
-:10048000A000008002000090000061008001008058
-:10049000F24BD0B600006800A0000080020000907F
-:1004A00000000000A0000004FD4BD03400006600F6
-:1004B000800100801281FCB600002D0F000000D8E2
-:1004C000020000D218000000000000F8730A03398F
-:1004D00068003600000000C0020036920000040FE1
-:1004E000000000D8020000D218003600000000F81A
-:1004F000730A03F900005900030100FC024018BD13
-:1005000000007B00030000FC024019BD0000000059
-:100510000000009401C02F320000000000000080A5
-:10052000F1010034000000000000008401C02F32FF
-:1005300002006D00B00000A0F20B00B900007000D6
-:100540000401008002C0B0BC00007900A00000805F
-:10055000020000900000720080010080F24BD0B6D3
-:1005600000007900A0000080020000900000000060
-:10057000A0000004FD4BD034000077008001008013
-:100580001281FCB600002D0F000000D8020000D23E
-:1005900018000000000000F8730A033979003600E3
-:1005A000000000C0020036920000040F000000D8D6
-:1005B000020000D218003600000000F8730A03F9A8
-:1005C00000006A00030100FC024019BD0000590050
-:1005D000030100FC024018BD08003E03000000F8C3
-:1005E000A340019908000000000000F873400139A1
-:1005F0000000840080010080E20180B600008100DC
-:1006000000000080020000900800ED020C0000F8DD
-:10061000534001B90000830080010080E20180B6F0
-:100620000000361012000068020580B0000032039E
-:100630000000006C1FC0F69A0000000000000000DF
-:100640000805803000000000000000FC02000132BC
-:10065000000000000000001008803D320000000093
-:10066000000000D40200003202A0000000000000E0
-:10067000A90D8032000088001200005402A438B294
-:10068000000200800000002C0800373218003600FD
-:10069000000000F8730A03F90000000000080004DD
-:1006A00008807232000090009F00005C080072B267
-:1006B00087008F008001008082CD85B00000A100FE
-:1006C0000000002CD8C182940000A1000000002C82
-:1006D00088C18294000F99000401008082CD85B00A
-:1006E00000009900800000804281FCB600003610B6
-:1006F00012000068020580B0000000000000006CDD
-:100700001FC0F63A00000000000000FC02000132A9
-:1007100000009700040100DC43603DB30000320399
-:10072000000000FC0200009218000000000000F829
-:10073000738A033994003600000000C0020036922C
-:1007400010009F0087000078792116B801009F00F3
-:1007500004010080828D97BC8700A8008700007884
-:1007600089CD85B000009E0004010080128097BCF6
-:100770000000A1000000002CD8C182940000A1005C
-:100780000000002C88C182940000A8008001008035
-:10079000F2C085B60000A8000000002C98C1829429
-:1007A0000000A70080010080D2C182B60000A8002E
-:1007B000800100807280FCB600000000001800A8D4
-:1007C000423D723000000000541889FCF2C07C30B9
-:1007D0000000CB0080010080F2C185B60000A900B6
-:1007E00000000080020000900000A3008000008054
-:1007F0008280FCB600000000540000FC02000032C1
-:100800008000802000000080C2CD85300000BE0046
-:100810000B000080020000B018000000000000780B
-:1008200079A116382000CB0004000080828D97BC8F
-:100830000000B500800100806280FCB68700B50032
-:100840008700007889CD85B00000B10004000080E9
-:10085000128097BC0000B50004010080228097BC84
-:100860000000B5008001008072C185B61000000054
-:1008700000000078796116380000BC000401008097
-:10088000328097BC0000CB000000002CB8C18294DD
-:100890000000BC00800100805280FCB60000BC005B
-:1008A0008000008072C185B60000BC00800100801D
-:1008B00002C185B60000BC0080010080D2C185B6AF
-:1008C000180000000000007879E116380000BC0034
-:1008D00004010080328097BC0000CB000000002C97
-:1008E000C8C1829400000000000000040800043227
-:1008F0000000CB000000002CA8C18294080000007A
-:1009000000000078792117380000CB000400008037
-:10091000328097BC0000CB0004010080228097BC8D
-:100920001F0000000012000889CD72300500000091
-:1009300000120000B9DC173800000000000000A819
-:10094000220090370000CB008000868022247CB6F5
-:100950000000361012000068020580B000000000A0
-:10096000000000FC020001320000C900040100DCAC
-:1009700043603DB300003203000000FC020000921F
-:1009800018000000000000F8738A0339C600360022
-:10099000000000C0020036920000CE00120100608C
-:1009A000084023B2008200000000000808803632B0
-:1009B0000000C500000000641F40F69A00003610D9
-:1009C00012000024080023B200003610120000209C
-:1009D00008C023B20000361012000018088023B2AD
-:1009E00000000000000000FC020001320000D50001
-:1009F000040000DC43603DB318000000000000F874
-:100A0000738A0339D1003600000000C0020036921C
-:100A100000000000000000FC020085320000000021
-:100A2000000000D80280013200000000000000D069
-:100A30000200003200C0E1001801000CA8CD3EB257
-:100A40000000D50012000038028081B200000000D2
-:100A50000000003C02008232000000000000003074
-:100A600002408232000000000000003402008632A2
-:100A700020800000000000080880363200000000DE
-:100A80000000005C1FC0F53A00003203120100684C
-:100A9000020580B0000036100000008002000090C7
-:100AA0000000000000180078090072320023E40002
-:100AB00004010080A2CD82B00000E500000000002B
-:100AC00009000092000036109F16000029C172BC78
-:100AD00000000000001800000780813200000000C4
-:100AE0000020000007008232000000000028000003
-:100AF0000780973210000000003000001720903966
-:100B0000000000000038000007C082320000000032
-:100B1000000000D8020000320000000000000000C9
-:100B2000074080320000EE0080010080A2C182B642
-:100B30000000EF000008000057008097050000004B
-:100B40000008000007A0043900003610041000005F
-:100B5000074082B200000000001800000700863243
-:100B60000000F10012000050F2C138B41800360045
-:100B7000000000F8730A03F9000036101200006844
-:100B8000020580B00000F4001200004802C080B2EC
-:100B900000003203CA010008E881809408000000C8
-:100BA000000000F89340013910000000540000FCE0
-:100BB000824D90360000F800F00100D8020000B22B
-:100BC00000000000620401A802C06E3200000000B4
-:100BD0000004010059C06E370000000000040178D5
-:100BE00019C06E3A000000004E0401EC06BD9730BB
-:100BF00000000000E00000F41E40EF3A000000009A
-:100C000000188BCC074000320000000000000000FC
-:100C100007400932000000000008000077C02937B3
-:100C20000000361004100000173D90BA00000000CC
-:100C3000001800000780F432000003011200004099
-:100C4000F2C138B400000000000000FC32C02F30B8
-:100C5000000000000000001008803D32180036003F
-:100C6000000000F8730A03F900000000000000D43F
-:100C700002000032000090018038008022C072B66D
-:100C800000000C01120000C8020020B20000130195
-:100C90001201005C088020B20000361012000060D3
-:100CA00002802CB218000000000000F8738A03399B
-:100CB00009013600000000C002003692000000006A
-:100CC000000000F81F80FF3A00000000000000FC58
-:100CD00032008530000068010400008042603DB3AE
-:100CE00018000000000000F8738A03390F01360075
-:100CF000000000C002003692080000000000000062
-:100D000088CD853700000000000000200800723206
-:100D100000000000000800240800723200003610B5
-:100D20000410006C080072B2000000000018004CB3
-:100D3000080072320000361004200018080072B259
-:100D4000000000000030002808007232000000009F
-:100D5000002800300800723200000000000000602F
-:100D600008808232000022010600008062A082BC5E
-:100D7000000000000000000007000632070000002D
-:100D800000080000774A09390000361004100000FE
-:100D9000070082B200000000CA190000074082323A
-:100DA0000000210112000040F2C138B40000000030
-:100DB000000000D8024000320000470104380078EB
-:100DC000D9C572B00000260180010080028097B66C
-:100DD00000000000000000F882802F34000028018D
-:100DE00080010080128097B600000000000000F82B
-:100DF00092802F34040000000038003CB81C1738E3
-:100E0000000000000000003C28C083370000000004
-:100E1000003A002C08C07232000000000000001CE4
-:100E2000B8E0833A00000000CB2900200700003220
-:100E3000000046010400008002C081BC00000000E8
-:100E40000000003478A0813E000000000000001C7B
-:100E5000D8E0813C00003501063A0080B25C83BCDA
-:100E600000000000003A000089C172370700340119
-:100E70002B010004790A04B900000000CB00000433
-:100E80001941903400003801003A002C070000920C
-:100E900000000000003A002CD7E0723C0000000087
-:100EA0000000000009000032000000000000000403
-:100EB00009000032000000000000000007648332D7
-:100EC000000000000008000007008032000036101B
-:100ED0000410000007C086B20000000000180000E7
-:100EE00007C084320000550104000028D8A082BC4D
-:100EF0000000000000000000D820803A00004101FE
-:100F00000400008072802DBC00003F0112000044EC
-:100F100012E438B200004201000000D812802D9A7D
-:100F20000000BD0F00000004F94190F400004401EE
-:100F300004000018D8A081BC00002D010000006C46
-:100F4000D8E0869A00007A0F0000004408802DF255
-:100F500000002D0100000030080000920000000099
-:100F6000CB19002007000032070049012B010004C3
-:100F7000790A02B900000000CB0000041941903446
-:100F8000000000004D000000A7A0813E000000000E
-:100F90000008000007008032000036100410000036
-:100FA00007C086B2000000000018000007C08432AD
-:100FB0000000550104000028D8A082BC00000000F9
-:100FC00000000000D820803A000052010400008098
-:100FD00072802DBC000050011200004412E438B2AF
-:100FE00000005301000000D812802D9A0000BD0FB0
-:100FF00000000004F94190F400007A0F0000004462
-:1010000008802DF200004701000000300800009227
-:101010000000000000000004F94190340000560177
-:101020001200004412E438B218003600000000F844
-:10103000730A03F9000000000018000409807332ED
-:1010400000000000002800088980733700000000BD
-:101050000000008007008632410000000006008C7E
-:101060000700363200005F012908008007C085B202
-:10107000000062012810008C070000B2000063012C
-:101080000012008407000092000000000010008C95
-:10109000F7E0823A0000620128180080074090B211
-:1010A00000006301001200840700009200000000AD
-:1010B0000012008427E482320000660104000080F0
-:1010C00042603DB318000000000000F8738A033945
-:1010D00063013600000000C00200369200000000EC
-:1010E000000000FC02008532000036101200005C97
-:1010F00052812CB400000000000000D802800132B0
-:10110000000000000000008002003B3208406A013D
-:10111000F0010008088036B2000000000004013829
-:1011200008C06E3200000000E00000F41E40EF3CFA
-:10113000000071010B01008C080000B200006E017C
-:10114000F2010080020000B000000000000000F08A
-:101150000E003A3200008201E20000800E8083928D
-:1011600000007101F2010078C93B3ABC00007B012C
-:1011700002010080828097BC00000000000000A8EF
-:101180000200E832000076010400008022A22ABC9E
-:1011900000007A0104198B8002C07CBC00000000B2
-:1011A0000000008C18C0883A00000000000000A871
-:1011B00012802A3A00000000000000A802BD2A3078
-:1011C0000000740104010080E2A02ABC00007F013D
-:1011D0000200008082C088BC00000000E20000081D
-:1011E0000800003200000000000000A802808832E1
-:1011F0000000000000188BCC070000320000320312
-:10120000000000DC03000092000000000000003835
-:1012100008802A3200000000000000F00E003A3280
-:1012200000000000E20000800E802A320000000072
-:10123000000000A8028088320000000000188BCC5B
-:101240000700003200000000000000DC0300003254
-:101250000000000000000000078083320000000052
-:101260000000000079C02937602000000000000065
-:10127000890D903A00000000CA0100D812802D3A72
-:101280000000000000000000070001320000000024
-:10129000000800000700903200000000001000006D
-:1012A0000740E83200000000001800000780E83224
-:1012B00000000000000000FC0200003200003203C9
-:1012C00012010048F2C138B400008E010000008015
-:1012D00002000090000000000030007808807232A8
-:1012E0000400000000380054A85C16380B00000011
-:1012F0000038002CA8DC1638140000000000001C88
-:10130000884D853A0000000000000020080072327D
-:1013100000000000000800240800723200000000F5
-:101320000010006C08007232000000000018004C31
-:10133000080072320000361004200018080072B253
-:101340000000000000280030080072320000A101F7
-:10135000083C0014188072BC00000000000000145B
-:101360001840813C00000000000000000700063229
-:101370000700000000080000774A09390000361015
-:1013800004100000070082B200000000CA1900002B
-:10139000074082320000A00112000040F2C138B4C0
-:1013A00000000000000000D80240003200000000F1
-:1013B0000000006478C029370210000000000064BB
-:1013C000884D863A000000000000008008000032CE
-:1013D0000000000000000040080000320000000093
-:1013E0004D00000077A0813E0000000000080000D2
-:1013F00007408632000036100410000007C086B295
-:10140000000000000018000007C084320000B9018D
-:101410000400001CD8E081BC000000000000006453
-:10142000D860863A0000AF010400008072802DBCB5
-:101430000000AD011200004002C038B20000B5014A
-:10144000000000D812802D9A0000AF011200004069
-:10145000F2C138B418003600000000F8730A03F92E
-:101460000000B4010401008002802DBC0000B00126
-:10147000670000F8A2802FB500003610120000E8C7
-:1014800002C021B200000000000000D8024000327B
-:101490000000B70104000018D8A081BC0000A6011C
-:1014A0000000006CD8E0869A00005D0E0000004449
-:1014B00008802DF20000A601000000300800009214
-:1014C0000000B90112000040F2C138B41800360023
-:1014D000000000F8730A03F90000BE010401008057
-:1014E00002802DBC0000BA01670000F8A2802FB571
-:1014F00000003610120000E802C021B20000C9014D
-:1015000004010080020084BC00000000000000D440
-:101510000240003200000000000000A42240853A92
-:10152000040000000018004088CD74360000000060
-:10153000000000402800843700000000000000D4B4
-:10154000020000321400C9010400001C880D84BC94
-:1015500000000000000000780961853A8000361024
-:1015600006010080828D97BC00000000000000642E
-:10157000D860863A0000B501000000D80240009211
-:101580000000CB0104000018D8A081BC0000CD01F0
-:101590000000006CD8E0869A00005D0E0000004458
-:1015A00008802DF20000000000000030080000322A
-:1015B00000000000000000D40240003200000000E3
-:1015C000000000A422C0823A000000000000003C9D
-:1015D000B860853C0400D3018100006088CD74B6FA
-:1015E0000000000000040028F8A0753C0000D401B1
-:1015F00000080074088075920000000000080028B0
-:10160000F8A0753C000000000000002808A1823C02
-:1016100000000000000000A4F2602A3A0000000070
-:101620000008004808007532000000000020007C1F
-:10163000088075320900DA01041A007088CD74B090
-:1016400009000000001A004C87CD74317F000000B3
-:1016500000000064884D8631000000000000006436
-:101660002840863A00000000000000D80240003206
-:10167000000000000010000007408632000000005B
-:10168000000000D8028000320000000000100000BE
-:101690005761863A0000E301120000C8020020B240
-:1016A0000000E6011201005C088020B20000361044
-:1016B0001200006002802CB200000E012A0100D44A
-:1016C000020000B218003600CA0000F8730A03F9DD
-:1016D00000000F01000000F81F80FF9A00000000CA
-:1016E000000000D4024000320800000000000000AA
-:1016F00088CD8537000000000000001CE8A1823E74
-:1017000000000000000000A42240853A0000000014
-:1017100000080050078084320000ED0104010080C1
-:1017200072A082BC00000000001A004CC7E17432B5
-:10173000000000000000006808E1813A0000F001AC
-:1017400090010078F9A186BA00000000000000783E
-:101750001980973A00000000002000580780973257
-:1017600000000000000000D80280003200000000ED
-:101770000000000007008432000000004008000064
-:101780005721803A0000F4011200004CF2C138B435
-:1017900000000000000000000821803A0000000066
-:1017A0000000000408C0813200000000510000D891
-:1017B00002C0003200000000000000D4020000322D
-:1017C00000000000CB190020070000320700FC01D8
-:1017D0002B010084780A02B900000000CB000084CD
-:1017E00018418834000000004D00000077A0813EC1
-:1017F00000000000000800000700803200003610E2
-:101800000410000007C086B20000000000180000AD
-:1018100007C08432000036109F000028D8A082BC88
-:10182000000014020400001CD8E081BC0000080283
-:101830002D000000D82080BA00000502120100E847
-:1018400002C021B218003600000000F8730A03F944
-:10185000000007020401008022802DBC0000080265
-:10186000CD0100D80240849200000402000000F87C
-:10187000A2802F9500000B020400008072802DBC16
-:10188000000009021200004412E238B20000120205
-:10189000000000D812802D9A000000000000008493
-:1018A000F841883400000C021200004412E238B201
-:1018B00018003600000000F8730A03F90000110256
-:1018C0000601008022802DBC00000D02670000F898
-:1018D000A2802FB500000E02000000E802C0219295
-:1018E00000000000000000D802C0003200005D0EC1
-:1018F0000000004408802DF20000FA0100000030D2
-:101900000800009200001A0280000080D2802FB6EA
-:1019100000001702120100E802C021B218003600D0
-:10192000000000F8730A03F90000190204010080A6
-:1019300022802DBC00001A02000000D802408492D0
-:1019400000001602000000F8A2802F9500000000A1
-:10195000CD000084F841883400001B0212000044CE
-:1019600012E238B200000000000000D40240003251
-:1019700000000000000000A422C0823A0000230200
-:1019800004010080420086BC0000000000080058EE
-:1019900007408732000022028F010074184087BA86
-:1019A0000000000000000074080000320000250262
-:1019B00000040058F7A0869A00000000000000789C
-:1019C000F9A0863A2800000000080058878D973C4F
-:1019D00000000000000000D80240003218000000A3
-:1019E00000000000B7608539080000000008000012
-:1019F00087CD8537000028021200004CF2C138B4B0
-:101A0000000000000000004818A0843A0000000018
-:101A1000000000D40200003200000000000000803E
-:101A200057A1863A410000000006008C07003632BC
-:101A3000000000000008008007C0853200000000A0
-:101A40000010008C0740853200000000000000D824
-:101A5000028000320000361004000058088071B285
-:101A600000000000000000800880003218003600EE
-:101A7000000000F8730A03F9000035020401008039
-:101A800002802DBC00003202000000F8A2802F95D9
-:101A90000000320204010080180088BC00003802F7
-:101AA00090190058E89C85BA00000000000000581A
-:101AB0001880853A000000000018008007858530F6
-:101AC00000003D0204010080420086BC00000000CE
-:101AD000000000D8024000320000000000000008B2
-:101AE0008980713700003E020012008427E4829250
-:101AF00000000000001200840700003200004202D3
-:101B0000270000FC020085B20000420204000080B1
-:101B100042603DB318000000000000F8738A0339EA
-:101B20003E023600000000C002003692000036106F
-:101B30001200005C52812CB40000450204010080B8
-:101B4000028082BC00006801000000D40200009204
-:101B50000000480204010018D8A081BC00005D0EFE
-:101B60000000004408802DF20000E001C7010030B1
-:101B7000080000920000E001C701006CD8E0869ADE
-:101B800008000000C60100F893400139000032034C
-:101B900080018080320B6AB600000C0E0000003C11
-:101BA000030038F200004E020406018002C06EBC41
-:101BB00000003103000601EC56E06E9A00000000C0
-:101BC000C40701EC56E06E3A08C04F021200004014
-:101BD000A2CD39B218003600000000F8730A03F9EC
-:101BE0000000361003B8000009C06EBD53020000AB
-:101BF00000000088820D903A2F007C050000001C38
-:101C000008003692000036100000008002000090AC
-:101C10002C007C050000001C0800369200003610E5
-:101C200000000080020000900000361000000080DC
-:101C300002000090000036100000008002000090BA
-:101C400038007C050000001C0800369239007C0535
-:101C50000000001C0800369208000000000000F898
-:101C60009340013900000C0E0000003C030038F2E4
-:101C700000000000000000F842802F3408C05E021F
-:101C800012000040A2CD39B218003600000000F862
-:101C9000730A03F9000000000004017809C06E32E5
-:101CA00000000000006201EC068097320000000096
-:101CB000000601EC0640003200006302B50000D8C7
-:101CC000020000B200000000A50080A0360B6A34BC
-:101CD00000000000003002E806C02C3200000000C6
-:101CE000001801E00600003200000000000000F8CB
-:101CF00082852F3000007D050000001C0800369210
-:101D000008000000000000F89340013900006C0258
-:101D100080008080320B6AB6000032030000008031
-:101D20000200009000000C0E00000038030038F2A2
-:101D300000006F020402018002C06EBC000031038B
-:101D4000000201EC56E06E9A00000000C00301ECB6
-:101D500056E06E3A00C0700212000040A28D39B207
-:101D600018003600000000F8730A03F900007C0236
-:101D70003828001809006EB200007502042101081D
-:101D800069246EBC03007D050000001C080036922B
-:101D90000000790202300080829B90BC0000780233
-:101DA0000603018012C06EBC04007D050000001C0B
-:101DB0000800369205007D050000001C08003692E0
-:101DC00000007B020603018012C06EBC0B007D0583
-:101DD0000000001C080036920C007D050000001C6D
-:101DE0000800369200007E020421010869246EBCBE
-:101DF00003007D050000001C0800369200008202EE
-:101E000002300080829B90BC0000810206030180AA
-:101E100012C06EBC04007D050000001C0800369254
-:101E200005007D050000001C0800369200008402B9
-:101E30009F31010C69246EBC000000000000000C02
-:101E4000090000320000880204310004899B90BC24
-:101E5000000087020603018012C06EBC20007D05D1
-:101E60000000001C0800369221007D050000001CC7
-:101E70000800369200008A020402018012C06EBC83
-:101E800022007D050000001C0800369200008C0234
-:101E90000401000039A490BC23007D050000001C53
-:101EA0000800369224007D050000001C08003692D0
-:101EB000080036100C0000F8634001B910009102D0
-:101EC000C50100CC022015980800ED020C0000F8B6
-:101ED000434001B910000000C50100CC02201538B4
-:101EE00000000C0E0000003C030038F200009402D9
-:101EF0003601005C080580B00F007D050000001C65
-:101F00000800369210000000002C0200A9DB853981
-:101F1000000095021200005402A438B20000000034
-:101F20000008028C08C06E3200000000000C02980D
-:101F300028806E37000000000000009C3822143713
-:101F400000009E020430002808006EB20000361027
-:101F50000410006C08006EB2000000000018004C75
-:101F600008006E32000036100420001808006EB21F
-:101F70000500A1020038020078E16E99000000001F
-:101F8000510000D802000032000000000038027842
-:101F900009C06E32050000006808000077A197397B
-:101FA0000000A3021201000009C021B2180036008F
-:101FB000000000F8730A03F900000000545401FC0B
-:101FC00002C06E321410A70204000080A20D72B08D
-:101FD0000000510F0000002809C002F20E007D052C
-:101FE0000000001C080036920000B602331500A461
-:101FF00002C072B20000EA0280010080B20172B633
-:102000000101AD0204290080828D74BC080AEA0235
-:10201000042D0080828D74BC000000000030007C24
-:10202000080075320000B402003800881800759C62
-:10203000080AEA0204290080828D74BC10000000A6
-:10204000002C007C888D7537000000000030007C7B
-:1020500068DD87320000B3029F390088188075BCA4
-:102060001000000000340088888D75370000B4022D
-:10207000000000881880889C100000000034008850
-:10208000689D88390000B7029FF1018082DB87BC20
-:102090000000EA0200000080020000900000EA0256
-:1020A00080000080B20172B6000000000008004805
-:1020B0000800753200000000001000700800753242
-:1020C00000000000001C007438A275370000BC023C
-:1020D000831B007808C074B200000000000000F804
-:1020E000C2802F340000CC029F780180C2216EBCD8
-:1020F0000000C0029F990164881B87BC0000CD02CC
-:102100009F680164885B86BA0000000000000064DC
-:102110000800003200000000001600A402C0723265
-:1021200000000000003C02A4B25B2A3A000000005C
-:10213000003A027809C06E320000CE0208010004A5
-:10214000E8A575BC1000EA020B01001C080036B2BD
-:102150000000CC0204A10180829B84BC00007D05AC
-:102160009F980180C2216EBC00007D0506B10180F0
-:10217000825B87BC0000E9020B010080020000B016
-:102180000000CD0204990180C2216EBC0000E7026C
-:1021900002D4018092FB6EBC16007D050000001C7D
-:1021A0000800369217007D050000001C08003692DA
-:1021B0001C007D050000001C080036920000D002C3
-:1021C00004A10180829B84BC0000D70206A8018084
-:1021D000825B80BC0000D40204A9018002006EBCB6
-:1021E0000000E80204A10180829B84BC0000E80298
-:1021F00004010080124080BC14007D050000001C1A
-:10220000080036920000E8029FA0017829216EBCE8
-:102210000000E8020201008012A097BC0000CC027E
-:1022200000000080020000900000E3020400008033
-:10223000028082BC0000DC0202000080A26080BC40
-:1022400006007D052C01001C080036B200C0E0022B
-:1022500004010080A28D2FB006007D050000001C47
-:10226000080036920000E00204000080A26080BCFA
-:102270000000DF020603018012C06EBC09007D056C
-:102280000000001C080036920A007D050000001CBA
-:10229000080036920000E2020603018012C06EBC04
-:1022A00007007D050000001C0800369208007D052F
-:1022B0000000001C0800369202007D053801001C59
-:1022C000080036B20000E602020C0280A25B80BC6D
-:1022D0001F007D050000001C080036921E007D05D1
-:1022E0000000001C080036920000EB0200000028ED
-:1022F000094000920000EB020000002809800092D3
-:102300000000EB020000002809C000920000EB0270
-:1023100000000028090001920E00510F0000001C6F
-:10232000080036F200007D050000008002000090E9
-:10233000100036102A0000CC022015B800000C0E48
-:102340000000003C030038F21D00F102800100781B
-:1023500009E000B81D007D050000001C0800369251
-:1023600015007D050000001C0800369200000000EA
-:102370000000001CA805283008000000000000F83C
-:102380008340013900003E0380018080320B6AB631
-:1023900000000C0E00000038030038F27E0500003B
-:1023A0000000008882CD813A0000F9021D41025CE4
-:1023B000F80168B441003103000000F8A28D2F91AC
-:1023C00010000000D02C0200A9DB85390000960225
-:1023D0001201005402A438B20000FA02000000808A
-:1023E000020000900000000304B0008002006EBCF8
-:1023F0000000000380B9008082806EB600002510C6
-:102400000078016008006EF230007C05D700001CE7
-:10241000080036920000020380010080D2812FB6AE
-:1024200031007C05D700001C080036920000040330
-:102430008001008042812FB635007C05D700001C4A
-:10244000080036920000110304A8010809006EB2CA
-:102450000000000000200208899B903E0000000060
-:1024600000A00108899B903A000011039F88010891
-:10247000899B90BC000000000034020009C06E3D42
-:1024800000000000000C020409A46E3700000D03D8
-:102490000200008012A490BC0000000000000008B0
-:1024A000198090370000110302010280829B90BCCA
-:1024B00031007C05D700001C080036920000110393
-:1024C00004B0008002006EBC001211030401008001
-:1024D000A28D2FB032007C05D700001C0800369278
-:1024E00000003103000000F872812F950000000009
-:1024F000000000F842802F3408C050021201004052
-:10250000A2CD39B200001303000000800200009049
-:1025100008000000000000F89340013900003E036D
-:1025200080018080320B6AB60000000000000014B9
-:102530000840903200000C0E00000038030038F212
-:102540007E0500000000008882CD813A080000006E
-:10255000000000F89340013900003E0380018080B4
-:10256000320B6AB600000C0E00000038030038F28F
-:1025700000001F030420018052206EBC26007D0550
-:102580000000001C0800369225007D050000001C9C
-:102590000800369200002503040100D81E80EDBC1F
-:1025A00000002103B70000D80EC0EDB200002403E4
-:1025B00004010080423BEEBC00000000000000E08F
-:1025C0001E00EE3A00000000A70000D00E00EE3220
-:1025D00000000000007486CC02806C320000000015
-:1025E000000000000940E7320000290380018080DC
-:1025F000320B6AB6360028031200002C82CD2EB2B0
-:1026000000002B030401008042C52CBC00002C03F9
-:10261000000000CC0200009200000000000000CC8E
-:1026200012C02C3A0000270304010000190090BCDE
-:1026300000000000007486C806C02C3208003E036B
-:10264000000000F8C34001990000FA0D0000002CC2
-:10265000090000F200003203000000800200009038
-:102660000000FA0D0000002CF90100F400003B030B
-:1026700004000028098080B200000000000000D89B
-:10268000020000320000F10E00000008080000D235
-:1026900000003B0304000080028092BC180036005A
-:1026A000000000F8730A03F900003E038001008077
-:1026B000A2802FB600003E031201000009C021B223
-:1026C00018000000000000F8730A03393E033600CA
-:1026D000000000C00200369200003E03800100802E
-:1026E000A2802FB600003E031201000009C021B2F3
-:1026F00018003600000000F8730A03F9000000001B
-:10270000000000F80200003218003600000000F857
-:10271000738A029910000000000000E403003632C2
-:1027200002000001000000E003003732000000005A
-:10273000000000E40300363204000001000000E065
-:1027400003003732AA040000000000E40300363220
-:1027500009000001000000E0030037320000000023
-:10276000000000CC0F00003200070000000000E471
-:102770000300363206000001000000E0030037329B
-:1027800020000000000000E40300363208000001D1
-:10279000000000E00300373200010000000000E408
-:1027A0000300363205000001000000E0030037326C
-:1027B00030000000000000E4030036320700000192
-:1027C000000000E00300373200A00000000000E439
-:1027D0000300363208000008000000E00300373232
-:1027E00000000000000000A0020000320000000015
-:1027F000000000000B000032000052038B0100A01B
-:1028000012002ABA00000000000000A802000032F6
-:1028100000000000000000E0070000320000550347
-:102820000601008002802ABC000000000000009C1D
-:102830000200003200000000000000D4020000325C
-:1028400000000000000000CC020000320000000088
-:10285000000000D80200003200000000000000D09C
-:102860000200003200000000000000DC0200003224
-:1028700000000000000000F802000032000000002C
-:10288000000000C80200003200000000000000C488
-:1028900002000032000058038501009C12C029BAD2
-:1028A00000000000000000E4030036320B000004CA
-:1028B000000000E00300373280000000000000E468
-:1028C0000300363213000004000000E0030037323A
-:1028D00000200000000000E4030036320C00000479
-:1028E000000000E00300373200000000000000E4B8
-:1028F000030006320F000004000000E0030037323E
-:1029000000440000000000E4030036320D00000423
-:10291000000000E00300373200040000000000E483
-:102920000300363214000004000000E003003732D8
-:102930009F000000000000E4030036321500000490
-:10294000000000E00300373200000000000000E457
-:102950000300363218000004000000E003003732A4
-:1029600060000000000000E4030036321D00000497
-:10297000000000E00300373200000000000000E427
-:10298000030004321E000004000000E003003732A0
-:1029900070000000000000E4030036321F00000455
-:1029A000000000E00300373200000000000000E4F7
-:1029B0000300003220000004000000E00300373272
-:1029C000A0030000000000E40300363217000004FA
-:1029D000000000E00300373240000000000000E487
-:1029E000030036321B000004000000E00300373211
-:1029F00060000000000000E4030036321C00000408
-:102A0000000000E00300373200000000000000E496
-:102A10000340003216000004000000E003003732DB
-:102A200000010000000000E4030036321A00000438
-:102A3000000000E00300373220010000000000E445
-:102A40000300363219000004000000E003003732B2
-:102A500080000000000000E4030036320B0000019B
-:102A6000000000E00300373200010000000000E435
-:102A7000030036320C000001000000E00300373292
-:102A8000FEFF0000000000AC020036320000000033
-:102A9000000000000900003218000000000000F8EB
-:102AA0000364023900008B0385010000190090BA0D
-:102AB00025260000000000E403003632010000017A
-:102AC000000000E00300373200000000000000803A
-:102AD0000F00003200000000000000840F000032F0
-:102AE00008000000000000F8F34001390800000071
-:102AF000000000F8E340013908000000000000F881
-:102B0000C340013908000000000000F8B34001395B
-:102B100008000000000000F8A34001390800000090
-:102B2000000000F89340013908000000000000F8A0
-:102B30008340013908000000000000F873400139AB
-:102B400008000000000000F86340013908000000A0
-:102B5000000000F85340013908000000000000F8B0
-:102B60004340013908000000000000F833400139FB
-:102B700008000000000000F81340013900000000C8
-:102B8000000000F80380003200000000000000C8D0
-:102B90003F80FC35000000000000009C0200003275
-:102BA0000000000000000000030000326E00000082
-:102BB000000000D0020036320000000000000028B3
-:102BC000034038320000361004010080D20130B6D4
-:102BD0000000A303040100D012002DBCE00300009C
-:102BE000000000E40300363203000001000000E0B2
-:102BF0000300373200000000170000D0020000324E
-:102C000000000000000000ACE10000340000000003
-:102C1000000001E00600003200000000000801E4AE
-:102C20000600003200000000000E01EC0600003239
-:102C300000000000001001E006000032000000006B
-:102C4000000000D012002D3A6E00AB03020100809C
-:102C5000820D2DBC020000000000009CAE0D02326F
-:102C600000000000000000A8020000320000000088
-:102C7000008886CC0700363200000000008A86CC2F
-:102C80000700003A002400000000000409803632EA
-:102C90000000361012000064024090B200000000F4
-:102CA000000000042940903A0000B70312000078A9
-:102CB00009C020B2000000000000007809459030F3
-:102CC0000000B50302010080C28297BC0000000032
-:102CD000000000840200003200000000000000CC70
-:102CE000030000320000BB038E010080024028B2C6
-:102CF0000000510E000000D8020000D2150F0000A5
-:102D00000000008C0E0036325200000000000074FB
-:102D10000E00363218000000000000E403003632D6
-:102D200009000002000000E003003732FECA000084
-:102D3000000000E4030036320A000002000000E058
-:102D4000030037320000C60312010000094020B220
-:102D50000000C40300000080020000900000C603D1
-:102D600012000004094020B20000C9039F01008046
-:102D7000020090B20000C80312000008094020B20F
-:102D80000200C40304010078092417B806000000FB
-:102D900000000078096416380000C40304010080B4
-:102DA000028197BCFE0000000000004403003632A0
-:102DB000FE00360000000048030036920000361086
-:102DC00012000000094020B20000CF0312000004EE
-:102DD000094020B20000D2039F010080020090B29F
-:102DE0000000D10312000008094020B200000000DA
-:102DF000000000B402009032000036100000008095
-:102E000002000090000036100000008002000090D8
-:102E10000000361000000080020000900000361014
-:102E200000000080020000900000361000000080CA
-:102E300002000090000036100000008002000090A8
-:102E400000003610000000800200009000003610E4
-:102E5000000000800200009000003610000000809A
-:102E60000200009000003610000000800200009078
-:102E700000003610000000800200009000003610B4
-:102E8000000000800200009000003610000000806A
-:102E9000020000900600EA030000000C0964169886
-:102EA00000004902000000140840909200006902EE
-:102EB0000000001408409092340015030000001C2C
-:102EC00008003692120015030000001C080036921C
-:102ED0003A0015030000001C08003692000036106E
-:102EE000000000800200009000005B02000000145F
-:102EF0000840909200001D04000000800200009035
-:102F000000001A030000001408409092EB03000038
-:102F10000000008882CD903A0D000D04000000FCF6
-:102F200002E416980D001E04000000FC02E416984E
-:102F30000D002704000000FC02E416980000340491
-:102F4000000000800200009000003D04000000002E
-:102F50000940909D000040040000008002000090A5
-:102F600000004904000000800200009000005204AC
-:102F7000000000800200009000005B0400000000E0
-:102F80000940909D00006004000000800200009055
-:102F900000006804000000000940909D00006D04DE
-:102FA00000000080020000900000DC04000000002F
-:102FB000090000920000DC040000000009400092BB
-:102FC0001D07DE04000000A0020036920000EC04A1
-:102FD0000000008002000090000036100000008019
-:102FE0000200009000001D04000000DC0F409092E1
-:102FF0000000B00400000080020000900000B50452
-:10300000000000D4020000921000CA0400000084F6
-:103010001F64149800001D04000000EC0E40909204
-:103020000000D604000000800200009000001D0493
-:10303000000000D40E4090920000D90400000080EF
-:103040000200009000006D05000000DC0E40909230
-:103050000000FB0400000080020000900800000552
-:10306000000000501F24169800000F05000000D833
-:10307000020000920D001905000000FC02E4169801
-:1030800000001A05000000D0020000920000F600C7
-:10309000000000D002000092000035100000008007
-:1030A0000200009000003610000000800200009036
-:1030B00008000000000000F8934001390000000003
-:1030C000000000780945903000003E0306010080B2
-:1030D000228097BC02001004B00000A0F20B00B9DF
-:1030E00000000000A00000046B41903400003E038B
-:1030F000800100800240B0B600003E030400008062
-:103100000280B0BC00000000000000D802000032C5
-:1031100000000000000000A822C02F3700000000BF
-:1031200000000000670100340042000000080000B9
-:10313000878D2A3A00003610041000000700B0B254
-:1031400000000000001800000700D03200001A0440
-:1031500012000048F2C138B418000000000000F866
-:10316000730A03393E033600000000C002003692A5
-:1031700008003E03000000F893400199000021047C
-:103180009F000080020090B20000000000000008D4
-:1031900009409032000000000000000409C0FD3228
-:1031A00002002104B00000A0F20B00B900000000F2
-:1031B000000000000B8090320000000000000000C2
-:1031C0000D40903200000000A00000043B40B031F0
-:1031D00000001D040400008002C02FBCF20E1D047C
-:1031E0000000008C0E00369208000000000000F87D
-:1031F0009340013902002804B00000A0F20B00B98E
-:1032000000002B04800100801240B0B600000000D6
-:10321000000000043B40B033000000000000000448
-:10322000FD4BD03500000000000000080B0000320C
-:1032300000000000A000000C1BE4B03200003E03C0
-:103240000B000080020000B0000031040400008088
-:10325000024090B21F003E03000000801140009920
-:103260000000300404000080123EF8BA00000000A4
-:10327000000000800100F83200003E0300000090D2
-:103280000140F89200003610800000800281FCB6F8
-:10329000000038049F000080020090B2000000008F
-:1032A0000000000809409032000000000000000407
-:1032B00009C0FD3200000000000000E403809032ED
-:1032C00009000004000000E00300373200000000A5
-:1032D000000000E4034090320A000004000000E017
-:1032E0000300373200001D04000000C80F81FC9469
-:1032F00000000000000000E47300903C1000000497
-:10330000000000E00300373200001D0400000080D0
-:1033100002000090000043049F000080020090B271
-:10332000000000000000000809409032000000008A
-:103330000000000409C0FD3200000000000000E4AD
-:103340000380903201000004000000E003003732E7
-:1033500000000000000000E00F809032000000003C
-:10336000000000E40340903202000004000000E08E
-:103370000300373200001D04000000E40F4090926B
-:1033800000004C049F000080020090B2000000008A
-:103390000000000809409032000000000000000416
-:1033A00009C0FD3200000000000000E403809032FC
-:1033B00003000004000000E00300373200000000BA
-:1033C000000000A80E80903200000000000000E421
-:1033D0000340903204000004000000E00300373294
-:1033E00000001D04000000AC0E4090920000550447
-:1033F0009F000080020090B2000000000000000862
-:1034000009409032000000000000000409C0FD32B5
-:1034100000000000000000E403809032050000047A
-:10342000000000E00300373200000000000000E46C
-:103430000340903206000004000000E00300373231
-:1034400000000000000000440F80903200001D04C6
-:10345000000000480F40909200005D0404010080CD
-:10346000824290BC00000000000000000900003211
-:1034700000000000000000E403009032120000048D
-:10348000000000E00300373200001D04000000408F
-:103490001F40909C000063049F000080020090B2D7
-:1034A0000000000000000008094090320000000009
-:1034B0000000000409C0FD3200000000000000E42C
-:1034C0000380903207000004000000E00300373260
-:1034D00000000000000000E40340903208000004F7
-:1034E000000000E00300373200001D0400000080EF
-:1034F0000200009000006A0404010080824290BC37
-:103500000000000000000000090000320000000080
-:10351000000000E40300903211000004000000E00D
-:103520000300373200001D04000000FC1F40909C87
-:10353000000070049F000080020090B200000000B4
-:103540000000000809409032000000000000000464
-:1035500009C0FD32030900000000002808003632CF
-:103560000000890400000030080036D200009304F7
-:1035700000000044088000D20000790404010080AB
-:10358000020084B2030E000000000028080036325A
-:103590008000890400000030080036D20000930447
-:1035A0000000004408C000D200007904040100803B
-:1035B000020084B200008004000000440800019270
-:1035C0008002000000000000070036328C45000039
-:1035D000000800000700363200003610041000001A
-:1035E000078090B2000000000018000007409032F1
-:1035F0000000000000000048F2C1383400007E04E2
-:1036000012000080020000B018003600000000F830
-:10361000730A03F920000000000000E403003632C2
-:1036200009000002000000E0030037320000000043
-:10363000000000E4034084320A000002000000E0C1
-:10364000030037328C450000000000A8020036322B
-:10365000A000000000000000090036320000000059
-:10366000000000E0070000320000860406010000B0
-:10367000190090BC00001D040000008002000090B2
-:103680008C450000000000C80200363280020000B5
-:103690000000003C0800363200000000000000344A
-:1036A0000800013200008E0402000080D2E083BCDA
-:1036B000000000000000003408C083320000A404B1
-:1036C00000000080020000F000000000000000A0E8
-:1036D000078083320000000000000030D820833AC9
-:1036E00000008C040401003CD8E083BC0000000012
-:1036F00000010080020000500000000000000040B7
-:1037000008000032000000000000004808000032FD
-:103710008C450000000000C80200363200020000A4
-:10372000000000C8828D2C3A800000000000003CA0
-:10373000080036320000000000000078098078326E
-:103740005A5A000004010080828D975C00009C049E
-:1037500002010048A89E84BA000000000000004852
-:103760001880843A00009A040601003C28C083BCFB
-:10377000000000000000007809858430100000007F
-:1037800000000048888D84360000A10490010048A4
-:10379000E8A584BA00000000000000481880843AC0
-:1037A0000000000000000048088584300000000090
-:1037B000040100800285845C0000000000010040DC
-:1037C0000840005200000000000000E403008332C3
-:1037D00001000002000000E0030037320C00AA04E0
-:1037E0000000002CD8A082F905000002000000E0D3
-:1037F00003003732000000000000008002000030AB
-:10380000000000000001003808403E720000000087
-:10381000000000E403C0823202000002000000E069
-:103820000300373202000002000000E003003732DC
-:103830000000000000000080020000300000AC0426
-:1038400080000080F2403EB60000000000010080D1
-:10385000020000700000B3049F000080020090B2DC
-:103860000000000000000008094090320000000045
-:103870000000000409C0FD320000000000000084C8
-:103880000E80903200001D04000000880E409092CF
-:1038900008000000000000F8934001390000B9045E
-:1038A0009F000080020090B20000000000000008AD
-:1038B00009409032000000000000000409C0FD3201
-:1038C00000000000000000200740F532000000006A
-:1038D0000008002007000032000000000010002057
-:1038E00007C0F53200000000001800200740F63243
-:1038F00000000000002000200780F63200000000D9
-:103900000028002007C0F632000000000030002030
-:103910000700F73200000000003800200780FF3267
-:1039200000000000000000D802000032000000008B
-:1039300000000000074009320000000000080000FD
-:1039400077C0293700000000001000000780903287
-:103950000000000000180000074090320000C6047C
-:1039600012000048F2C138B418003600000000F818
-:10397000730A03F90000000000000008C8010034C9
-:1039800000003203000000FC020000920000CC04A2
-:1039900080010080F24190B60000CD04000000C814
-:1039A0002F81FC9400000000000000C82F81FC352E
-:1039B00000000000000000800F4590300000D0049F
-:1039C00002000080027EF8BC0000000000000084BD
-:1039D0000F00F83200000000000000001940F83726
-:1039E00000000000000000843F40F83700000000A5
-:1039F000000000840F64F83A00000000000000009E
-:103A00001900F83700000000000000803F00F83780
-:103A100000001D04000000800F24F89A0000D80464
-:103A200080010080F24190B600001D04000000C833
-:103A30004F81FC9400001D04000000C84F81FC95DC
-:103A40000000DB0404010080024090BC0000000084
-:103A50000000000409C0003200001D04000000E462
-:103A60001E40909C00000000000000A8220090373B
-:103A700000001D04000086C007409092080000006E
-:103A8000000000F8934001390D000000000000FC28
-:103A900002E41638000000000000000009000232B5
-:103AA0000000E604040000800200B0B20000000044
-:103AB000000000000B00003220000000000000A009
-:103AC000820D2A3A0000E10404010000190090BCB4
-:103AD0000000E804000000287901009400000000C4
-:103AE000000000C83F80FC34408000000000002837
-:103AF000098036320000F10E000000D8020000D22A
-:103B000000003E0304000080028092BC1800000008
-:103B1000000000F8730A03393E033600000000C0BD
-:103B200002003692EA05F20404010080824D90BC46
-:103B300000000000000000EC0F00153200FE1F0026
-:103B4000000000F00F003732F0FF0000000000E836
-:103B50000F00363298050000000000F40F003632E6
-:103B60000000F804000000C84F80FC953623361092
-:103B700004010080824D90BC00000000000000ECB9
-:103B80000F80143200F81F00000000F00F003732E1
-:103B9000C0FF0000000000E80F0036329827000048
-:103BA000000000F40F00363200000000000000C8E2
-:103BB0004F80FC3404000000000000608F4D903AFC
-:103BC0000000BC0E00000080020000D000001D04B8
-:103BD00000000080020000900000FD0480010080D1
-:103BE000024090B600000000000000C86F80FC3466
-:103BF0000000FF0480010080124090B60000000029
-:103C0000000000C85F80FC3400001D04000000803C
-:103C1000020000900000020504010080324090B0D4
-:103C200080011D04000000C88F8DFC910000040578
-:103C300080000080124090B600000505000000C81A
-:103C40007F80FC9500000000000000C87F80FC34ED
-:103C50000000070580000080024090B600000805C3
-:103C6000000000C88F80FC9500000000000000C824
-:103C70008F80FC3400000B0580000080224090B64D
-:103C8000F20E00000000008C0E00363200000D0520
-:103C9000000000C81F81FC95150F00000000008C7B
-:103CA0000E00363200000000000000C81F81FC3406
-:103CB000100000000000004C1F24163800001D04F6
-:103CC000000000501F00F59C000012059F000080BE
-:103CD000020090B20000000000000008094090328D
-:103CE000000000000000000409C0FD3200000000D8
-:103CF000000000001700F53A8C44000000080000A6
-:103D0000070036320000361004100000078090B221
-:103D10000000000000180000074090320000160567
-:103D200012000040F2C138B418003600000000F85C
-:103D3000730A03F900001D040000008002000090D7
-:103D400000001D04000000EC0340909200001A05E2
-:103D5000B20000D8020000B200000000000201EC36
-:103D600016E46E3A08000000000000F893400139A4
-:103D700000004005171001F802006EB2060025058C
-:103D800004010080828D2FB003000000000000F8C5
-:103D9000828D2F3200C0050E00000028098036D227
-:103DA00000000000000201EC16C06E3C00000000A4
-:103DB000001886C80600003218003600000000F81F
-:103DC000730A03F900002605000000D002000092EB
-:103DD00000002B050419868002806CBC00000000E6
-:103DE0000000000009006E3200000000C10800045D
-:103DF00009006E3200000000C01586780FC06C32DA
-:103E0000000030058001008022802FB600003005C0
-:103E1000001886C806400092000000000040000024
-:103E200009006E3200000000C248000409006E3232
-:103E300000000000C01686780FC06C32000030050C
-:103E40008001008012802FB600000000001886C894
-:103E500006000032004000000000002809803632D1
-:103E6000000038050402018002C06EBC0000050E8F
-:103E7000000201EC16C06EDC0000360580000080F8
-:103E800002802FB600003805810000F822802FB490
-:103E900000003805001886C806400092000038056A
-:103EA000820000F812802FB400000000001886C8BD
-:103EB0000600003200000000001086C80600003234
-:103EC000000000000000000007C00A3200380000B7
-:103ED0000008000007003632000036100410000011
-:103EE000070090B200000000001800000740903268
-:103EF00000003D0512000040F2C138B41800360041
-:103F0000000000F8730A03F900000000170100F830
-:103F1000A2802F3400000000001086A842806C3779
-:103F200000004A051200703802007EB20000361010
-:103F30001200703C02007EB2000036101200703099
-:103F400002007EB2000036101200703402007EB211
-:103F50000000410502010080B2822ABC000000007E
-:103F6000170000D002000032060025050401008081
-:103F7000828D2FB000001F050403018002C06EBCBB
-:103F800000005505000000800200009000004C0574
-:103F90000403018002C06EBC00005505001086C8F5
-:103FA00046802A9600000000001086C846802A3607
-:103FB000000050058000008012802FB603005205DB
-:103FC000220000F8828D2FB200005205001886C82A
-:103FD00006000092000055058000008022802FB668
-:103FE00000000000C20100F802802F3500C0050E5D
-:103FF00000000028098036D200000000000201EC19
-:1040000016C06E3C18003600000000F8730A03F971
-:1040100000000000001001E006802F3200000000C8
-:10402000000000A8E100003400000000A20000FC35
-:10403000020000320000320380010080A2802FB60F
-:1040400000005B05B90100D8028001B20000320314
-:10405000000000F80200009200000000000000389C
-:104060001880F73A0000000000000038F8BF8330E5
-:1040700000005F0504010080F2BD83BC0000320334
-:10408000A90000F80200009200C066051801000CAB
-:10409000A8CD3EB200006205840000741F40F7BA4C
-:1040A00000003203A90000F80200009200000000A6
-:1040B000000000740F00003200C066051801000CFB
-:1040C000A8CD3EB218003600000000F8738A03F94C
-:1040D00000006305000000B0020000920000000034
-:1040E0000000007C0F8083320000000000280000E8
-:1040F000070000320000000000300000070000321E
-:104100000001008000380000070037320000000086
-:10411000003C000C0780833200006B051200004851
-:1041200002C080B200003203A9000008E801009438
-:104130000000730504010080A2C0EDBC5200000025
-:10414000000000740E00363200000000000000C0C5
-:104150000E400132407E0500000000B40E003732F0
-:1041600000000000000000C40E80073264007805E3
-:10417000000000CC0E003692290000000000007400
-:104180000E00363200000000000000C00E40003279
-:10419000A08C0000000000B40E00363200000000C9
-:1041A000000000C40EC0003200000000000000CC7F
-:1041B0000E80023210000000000000E4337BEC3976
-:1041C0001E000001000000E0030037320000000084
-:1041D000000000C86EC0EC3700001D04000000D8CD
-:1041E0000EC0ED927E0500000000008882CD813A6D
-:1041F0007E0500000000008882CD813ABD050000E8
-:104200000018018882CD6E3AC605000000180188AA
-:1042100082CD6E3ACF0500000018018882CD6E3A3B
-:10422000D80500000018018882CD6E3AE105000033
-:104230000018018882CD6E3AEA0500000018018856
-:1042400082CD6E3AF30500000018018882CD6E3AE7
-:10425000FC0500000018018882CD6E3A05060000BA
-:104260000018018882CD6E3A0E0600000018018801
-:1042700082CD6E3A170600000018018882CD6E3A92
-:10428000200600000018018882CD6E3A2906000041
-:104290000018018882CD6E3A3206000000180188AD
-:1042A00082CD6E3A3B0600000018018882CD6E3A3E
-:1042B000440600000018018882CD6E3A4D060000C9
-:1042C0000018018882CD6E3A560600000018018859
-:1042D00082CD6E3A5F0600000018018882CD6E3AEA
-:1042E000680600000018018882CD6E3A7106000051
-:1042F0000018018882CD6E3A7A0600000018018805
-:1043000082CD6E3A830600000018018882CD6E3A95
-:104310008C0600000018018882CD6E3A95060000D8
-:104320000018018882CD6E3A9E06000000180188B0
-:1043300082CD6E3AA70600000018018882CD6E3A41
-:10434000B00600000018018882CD6E3AB906000060
-:104350000018018882CD6E3AC2060000001801885C
-:1043600082CD6E3ACB0600000018018882CD6E3AED
-:10437000D40600000018018882CD6E3ADD060000E8
-:104380000018018882CD6E3AE60600000018018808
-:1043900082CD6E3AEF0600000018018882CD6E3A99
-:1043A000F80600000018018882CD6E3A010700006F
-:1043B0000018018882CD6E3A0A07000000180188B3
-:1043C00082CD6E3A130700000018018882CD6E3A44
-:1043D0001C0700000018018882CD6E3A25070000F6
-:1043E0000018018882CD6E3A2E070000001801885F
-:1043F00082CD6E3A0000F702000000D40200009265
-:1044000000007202000000800200009037070000E8
-:10441000001C018882CD6E3A3C070000001C018818
-:1044200082CD6E3A41070000001C018882CD6E3AB1
-:1044300046070000001C018882CD6E3A4B07000041
-:10444000001C018882CD6E3A50070000001C0188D4
-:1044500082CD6E3A55070000001C018882CD6E3A6D
-:104460005A070000001C018882CD6E3A5F070000E9
-:10447000001C018882CD6E3A64070000001C018890
-:1044800082CD6E3A69070000001C018882CD6E3A29
-:104490006E070000001C018882CD6E3A7307000091
-:1044A000001C018882CD6E3A78070000001C01884C
-:1044B00082CD6E3A7D070000001C018882CD6E3AE5
-:1044C00082070000001C018882CD6E3A8707000039
-:1044D000001C018882CD6E3A0000FC02000000D46E
-:1044E0000200009200001203000000D402000092BB
-:1044F00000003C0900000010088001920000361006
-:1045000000000080020000900000361000000080D3
-:1045100002000090000036100000008002000090B1
-:1045200000003610000000800200009000003610ED
-:1045300000000080020000900000361000000080A3
-:104540000200009000003610000000800200009081
-:1045500000003610000000800200009000003610BD
-:10456000000000800200009000007B0900000010A5
-:1045700008800092000036100000008002000090C9
-:10458000000036100000008002000090000036108D
-:104590000000008002000090000036100000008043
-:1045A0000200009000003610000000800200009021
-:1045B000000036100000008002000090000036105D
-:1045C0000000008002000090000036100000008013
-:1045D00002000090000036100000008002000090F1
-:1045E00000008809000000100880009200003610CA
-:1045F00000000080020000900000361000000080E3
-:10460000020000900000CF09000000100840019255
-:1046100000003610000000800200009000003610FC
-:1046200000000080020000900000361000000080B2
-:104630000200009000003610000000800200009090
-:104640000000361000000080020000900000D70932
-:104650000000001008C0009200003610000000802A
-:10466000020000900000D7090000001008C000926E
-:1046700000003D0C000000100840019200003610C0
-:1046800000000080020000900000D7090000001028
-:1046900008C0009200003610000000800200009068
-:1046A000000036100000008002000090000036106C
-:1046B00000000080020000900000E40900000010EB
-:1046C00008C0009200003610000000800200009038
-:1046D0000000E4090000001008C0009200003D0C3A
-:1046E0000000001008400192000036100000008019
-:1046F000020000900000E4090000001008C00092D1
-:10470000000036100000008002000090000036100B
-:1047100000000080020000900000361000000080C1
-:10472000020000900000E2090000001008C00092A2
-:104730000000361000000080020000900000E20936
-:104740000000001008C0009200003D0C00000010A6
-:104750000840019200003610000000800200009026
-:104760000000E2090000001008C0009200003610AE
-:104770000000008002000090000036100000008061
-:10478000020000900000361000000080020000903F
-:1047900000003610000000800200009000007A0A3D
-:1047A0000000001008C000920000D40900000010B2
-:1047B000080001920000CF0900000010084001929B
-:1047C000000036100000008002000090000036104B
-:1047D0000000008002000090000036100000008001
-:1047E00002000090000036100000008002000090DF
-:1047F000000036100000008002000090000036101B
-:1048000000000080020000900000750A0000001007
-:10481000088000920000D4090000001008000192F6
-:104820000000CF090000001008400192000036107F
-:1048300000000080020000900000361000000080A0
-:10484000020000900000361000000080020000907E
-:1048500000003610000000800200009000003610BA
-:104860000000008002000090000036100000008070
-:10487000020000900000750A00000010080001927C
-:104880000000D40900000010080001920000CF09C8
-:104890000000001008400192000036100000008067
-:1048A000020000900000361000000080020000901E
-:1048B000000036100000008002000090000036105A
-:1048C0000000008002000090000036100000008010
-:1048D00002000090000036100000008002000090EE
-:1048E0000000E40A00000010088000920000D409D3
-:1048F00000000010080001920000CF090000001025
-:104900000840019200003610000000800200009074
-:1049100000003610000000800200009000003610F9
-:1049200000000080020000900000361000000080AF
-:10493000020000900000361000000080020000908D
-:104940000000361000000080020000900000E40A21
-:1049500000000010080001920000D40900000010BF
-:10496000080001920000CF090000001008400192E9
-:104970000000361000000080020000900000361099
-:10498000000000800200009000003610000000804F
-:10499000020000900000361000000080020000902D
-:1049A0000000361000000080020000900000E309C3
-:1049B0000000001008800092000036100000008007
-:1049C000020000900000E30900000010088000923F
-:1049D00000003D0C0000001008400192000036105D
-:1049E00000000080020000900000361000000080EF
-:1049F00002000090000036100000008002000090CD
-:104A00000000361000000080020000900000361008
-:104A100000000080020000900000E3090000001088
-:104A20000800019200003610000000800200009093
-:104A30000000E309000000100800019200003D0C96
-:104A400000000010084001920000361000000080B5
-:104A5000020000900000361000000080020000906C
-:104A600000003610000000800200009000003610A8
-:104A7000000000800200009000003610000000805E
-:104A8000020000900000361000000080020000903C
-:104A900000008C0700000010080001920000361092
-:104AA000000000800200009000008C070000001051
-:104AB00008400192000036100000008002000090C3
-:104AC0000000361000000080020000900000361048
-:104AD00000000080020000900000361000000080FE
-:104AE00002000090000036100000008002000090DC
-:104AF00000005E0C00000010084001920000540C01
-:104B0000000000100840019200005E0C0000001040
-:104B1000084001920000CF090000001008400192F7
-:104B200000003610000000800200009000005E0CC3
-:104B300000000010084001920000361000000080C4
-:104B4000020000900000361000000080020000907B
-:104B50000000810900000010084000920000810957
-:104B60000000001008800092000081090000001081
-:104B700008C00092000081090000001008000192A6
-:104B80000000860900000010084001920000810921
-:104B90000000001008800192000081090000001050
-:104BA00008C0019200003610000000800200009052
-:104BB0000000361000000080020000900000361057
-:104BC00000000080020000900000490B000000106F
-:104BD000088000920000490B0000001008C00092FD
-:104BE0000000490B00000010080001920000CF09EE
-:104BF0000000001008400192000036100000008004
-:104C0000020000900000490B0000001008C0019253
-:104C100000003610000000800200009000003610F6
-:104C200000000080020000900000361000000080AC
-:104C3000020000900000361000000080020000908A
-:104C400000003610000000800200009000003610C6
-:104C500000000080020000900000680C00000010BE
-:104C60000840019200003610000000800200009011
-:104C70000000361000000080020000900000361096
-:104C8000000000800200009000003610000000804C
-:104C9000020000900000D80C0000001008400192B3
-:104CA0000000DB0C000000100840019200004C0CDA
-:104CB00000000010084001920000DB0C0000001012
-:104CC0000840019200008C0700000010084001928B
-:104CD0000000361000000080020000900000DB0C95
-:104CE000000000100840019200008D070000001035
-:104CF00008000292000036100000008002000090C0
-:104D00000000361000000080020000900000DC0C63
-:104D1000000000100840019200004C0C0000001040
-:104D2000084001920000DC0C0000001008400192D5
-:104D300000008C07000000100840019200003610AF
-:104D400000000080020000900000DC0C0000001059
-:104D50000840019200003610000000800200009020
-:104D600000003610000000800200009000003610A5
-:104D700000000080020000900000E10C0000001024
-:104D8000088000920000E10C0000001008C00092B2
-:104D90000000E10C00000010080001920000CF09A3
-:104DA0000000001008400192000036100000008052
-:104DB000020000900000E10C0000001008C0019209
-:104DC0000000361000000080020000900000361045
-:104DD00000000080020000900000361000000080FB
-:104DE00002000090000036100000008002000090D9
-:104DF0000000361000000080020000900000361015
-:104E000000000080020000900000361000000080CA
-:104E10000200009000006A090000001008400092A3
-:104E200000003610000000800200009000003610E4
-:104E3000000000800200009000003610000000809A
-:104E40000200009000003610000000800200009078
-:104E50000000F10C00000010088000920000F10C2E
-:104E60000000001008C000920000F10C00000010CB
-:104E7000080001920000CF090000001008400192D4
-:104E80000000361000000080020000900000F10CCD
-:104E90000000001008C001920000361000000080E1
-:104EA0000200009000003610000000800200009018
-:104EB0000000361000000080020000900000050D88
-:104EC00000000010088000920000050D0000001096
-:104ED00008C000920000050D0000001008000192BB
-:104EE0000000CF09000000100840019200003610B9
-:104EF00000000080020000900000050D000000107E
-:104F000008C00192000036100000008002000090EE
-:104F100000008C070000001008000092000036100E
-:104F2000000000800200009000008C0700000010CC
-:104F3000088000920000130D0000001008C00092CD
-:104F400000008C07000000100800019200008C0790
-:104F500000000010084001920000361000000080A0
-:104F60000200009000003610000000800200009057
-:104F70000000361000000080020000900000361093
-:104F80000000008002000090000036100000008049
-:104F90000200009000008C070000001008800092C2
-:104FA0000000210D000000100880009200008C0716
-:104FB000000000100800019200008C0700000010A3
-:104FC00008400192000036100000008002000090AE
-:104FD0000000361000000080020000900000361033
-:104FE00000000080020000900000361000000080E9
-:104FF00002000090000036100000008002000090C7
-:1050000000008C0700000010088000920000210DB5
-:10501000000000100800019200008C070000001042
-:105020000800019200008C07000000100840019267
-:1050300000003610000000800200009000003610D2
-:105040000000008002000090000036100000008088
-:105050000200009000003610000000800200009066
-:1050600000003610000000800200009000003610A2
-:10507000000000800200009000008C07000000107B
-:1050800008800092000036100000008002000090AE
-:1050900000008C070000001008400192000036104C
-:1050A0000000008002000090000036100000008028
-:1050B0000200009000003610000000800200009006
-:1050C0000000361000000080020000900000361042
-:1050D00000000080020000900000FD0C00000010A5
-:1050E000088000920000FD0C0000001008C0009233
-:1050F0000000FD0C00000010080001920000CF0924
-:1051000000000010084001920000361000000080EE
-:10511000020000900000FD0C0000001008C0019289
-:1051200000003610000000800200009000003610E1
-:105130000000008002000090000036100000008097
-:105140000200009000003610000000800200009075
-:1051500000003610000000800200009000003610B1
-:1051600000000080020000900000310D00000010DF
-:10517000080002920000361000000080020000903B
-:105180000000361000000080020000900000361081
-:105190000000008002000090000036100000008037
-:1051A0000200009000003610000000800200009015
-:1051B000000088090000001008C0019200003610AD
-:1051C0000000008002000090000036100000008007
-:1051D000020000900000CF0900000010084001927A
-:1051E0000000361000000080020000900000C1099D
-:1051F0000000001008C0019200003610000000807E
-:1052000002000090000036100000008002000090B4
-:1052100000003610000000800200009000008809A5
-:10522000000000100880009200003610000000808E
-:105230000200009000003610000000800200009084
-:105240000000CF0900000010084001920000361055
-:1052500000000080020000900000C1090000001062
-:1052600008C001920000361000000080020000908B
-:105270000000361000000080020000900000361090
-:10528000000000800200009000006F0B0000001082
-:10529000088000920000361000000080020000909C
-:1052A00000006F0B000000100880009200003D0C11
-:1052B000000000100840019200003610000000803D
-:1052C0000200009000006F0B0000001008800092A8
-:1052D0000000361000000080020000900000361030
-:1052E00000000080020000900000361000000080E6
-:1052F0000200009000006F0B0000001008000192F7
-:1053000000003610000000800200009000006F0BCB
-:10531000000000100800019200003D0C0000001089
-:10532000084001920000361000000080020000904A
-:1053300000006F0B00000010080001920000361002
-:105340000000008002000090000036100000008085
-:105350000200009000003610000000800200009063
-:1053600000006F0B000000100800019200003610D2
-:10537000000000800200009000006F0B0000001091
-:105380000800019200003D0C00000010084001924E
-:1053900000003610000000800200009000006F0B3B
-:1053A000000000100800019200003610000000808C
-:1053B0000200009000003610000000800200009003
-:1053C00000003610000000800200009000006F0B0B
-:1053D00000000010088000920000361000000080DD
-:1053E0000200009000006F0B000000100880009287
-:1053F00000003D0C00000010084001920000361033
-:10540000000000800200009000006F0B0000001000
-:10541000088000920000361000000080020000901A
-:1054200000003610000000800200009000003610DE
-:105430000000008002000090000036100000008094
-:105440000200009000003610000000800200009072
-:1054500000006F0B0000001008C0019200003D0C1E
-:10546000000000100840019200003610000000808B
-:105470000200009000006F0B0000001008C00192B5
-:10548000000036100000008002000090000036107E
-:105490000000008002000090000036100000008034
-:1054A000020000900000D70B00000010088000925E
-:1054B000000036100000008002000090000036104E
-:1054C000000000800200009000008C070000001027
-:1054D0000840019200003610000000800200009099
-:1054E0000000D70B0000001008800092000036106A
-:1054F00000000080020000900000361000000080D4
-:1055000002000090000036100000008002000090B1
-:105510000000D70B00000010088000920000361039
-:1055200000000080020000900000361000000080A3
-:105530000200009000008C0700000010084001925B
-:105540000000361000000080020000900000D70B21
-:105550000000001008C0019200003610000000801A
-:105560000200009000003610000000800200009051
-:10557000000036100000008002000090000036108D
-:105580000000008002000090000036100000008043
-:105590000200009000003610000000800200009021
-:1055A00000008C0700000010084001920000361037
-:1055B00000000080020000900000DF0B00000010DF
-:1055C00008C0019200003610000000800200009028
-:1055D000000036100000008002000090000036102D
-:1055E00000000080020000900000361000000080E3
-:1055F00002000090000036100000008002000090C1
-:1056000000003610000000800200009000008C07AF
-:1056100000000010084001920000361000000080D9
-:10562000020000900000DF0B0000001008800092D4
-:1056300000003610000000800200009000003610CC
-:105640000000008002000090000036100000008082
-:105650000200009000003610000000800200009060
-:10566000000036100000008002000090000036109C
-:1056700000000080020000900000C30C0000001039
-:1056800008400192000036100000008002000090E7
-:10569000000036100000008002000090000036106C
-:1056A000000000800200009000009407000000103D
-:1056B00008400092000036100000008002000090B8
-:1056C000000036100000008002000090000036103C
-:1056D00000000080020000900000361000000080F2
-:1056E00002000090000036100000008002000090D0
-:1056F0000000E6070000001008800092000036104D
-:1057000000000080020000900000361000000080C1
-:105710000200009000009B080000001008000192A9
-:105720000000361000000080020000900000930787
-:1057300000000010080001920000A5080000001001
-:10574000080001920000A508000000100800019266
-:105750000000A508000000100800019200003610AB
-:105760000000008002000090000036100000008061
-:10577000020000900000F507000000100880009271
-:105780000000361000000080020000900000930727
-:105790000000001008000192000036100000008098
-:1057A000020000900000361000000080020000900F
-:1057B00000000308000000100880009200009A0812
-:1057C0000000001008800092000093070000001005
-:1057D00008000192000036100000008002000090D6
-:1057E0000000BB0800000010084000920000BB0849
-:1057F00000000010088000920000BB0800000010AC
-:1058000008C00092000093070000001008000192F9
-:1058100000003610000000800200009000003610EA
-:1058200000000080020000900000E008000000106E
-:1058300008C00092000036100000008002000090B6
-:1058400000009307000000100800019200003610CD
-:105850000000008002000090000036100000008070
-:10586000020000900000E208000000100800019211
-:105870000000E208000000100800019200009307F9
-:1058800000000010080001920000361000000080A7
-:10589000020000900000361000000080020000901E
-:1058A0000000E40800000010088000920000E408F6
-:1058B0000000001008C000920000930700000010D4
-:1058C00008000192000036100000008002000090E5
-:1058D0000000930700000010084000920000B1088B
-:1058E00000000010088000920000B10800000010C5
-:1058F00008C0009200009307000000100800019209
-:1059000000009307000000100800009200009307B9
-:1059100000000010084000920000F808000000108D
-:10592000088000920000F8080000001008C00092F3
-:1059300000009307000000100800019200003610DC
-:10594000000000800200009000003610000000807F
-:105950000200009000002C09000000100880009256
-:10596000000093070000001008C000920000930799
-:1059700000000010080001920000361000000080B6
-:10598000020000900000361000000080020000902D
-:1059900000000C0900000010088000920000361082
-:1059A000000000800200009000009307000000103B
-:1059B00008000192000036100000008002000090F4
-:1059C0000000361000000080020000900000F40784
-:1059D00000000010088000920000361000000080D7
-:1059E00002000090000093070000001008000192E0
-:1059F0000000361000000080020000900000361009
-:105A0000000000800200009000002009000000104B
-:105A100008800092000020090000001008C00092D9
-:105A200000009307000000100800019200003610EB
-:105A3000000000800200009000003610000000808E
-:105A4000020000900000EF080000001008800092A3
-:105A50000000EF080000001008C00092000093074B
-:105A600000000010080001920000361000000080C5
-:105A7000020000900000361000000080020000903C
-:105A80000000390900000010088000920000390968
-:105A90000000001008C000920000930700000010F2
-:105AA0000800019208003103001801E8762081996E
-:105AB00008002F03001801E8762081990000990F53
-:105AC00000000080020000F0080091071D1901E8A5
-:105AD000762081B900003103000000F862812F9523
-:105AE000000031038000008002812FB62A003103BC
-:105AF000D001002C82CD2E9208003103001C01E859
-:105B00007620819900000000000000D802000032D9
-:105B100000000000000E01EC06C06E3554000000CD
-:105B2000000000000700363200000000000000BC4A
-:105B3000A8002D37B44400000008000087CD8B3A40
-:105B4000000000000000007899C02C37B40000006D
-:105B500000000078898D973A00003610021000008E
-:105B600087BF97BA00000000001800000740FE320F
-:105B700000009D0712000040F2C138B40000000090
-:105B80000090007809006E320000361004A000007A
-:105B900009806EB20000A20704A5000409806EB25D
-:105BA0000000000000000004090090320000A4077B
-:105BB00004010004096490BC00000000000000041F
-:105BC00009400032080000006E3402E816249039C3
-:105BD0000000A507B71002E0068097B20000A807F2
-:105BE00080000080F280FCB60000A907000000C819
-:105BF000FF80FC940000AA079F990080821BEEBCE6
-:105C000000000000009800E00E006E32000000006E
-:105C1000A70000800200003018003600000000F8E5
-:105C2000730A03F9000000000010021C09006E3224
-:105C30004000AF070601008082CD91BC00C0B007D4
-:105C4000001802E00680369200E00000001802E032
-:105C50000680363200000000000000200980033278
-:105C60000000B30780D7018032C06EB6000000008C
-:105C7000000000204900923A00000000009801183E
-:105C800009006E3200000000000A022409C06E32D2
-:105C90000000000000C0012809806E320000C1072A
-:105CA000800E018012C06EB602000000003C02ECC3
-:105CB0000600363200000000000000004901923A60
-:105CC0000000BD0780D6018042C06EB60082000091
-:105CD000001002E0A6CD913200A00000002C02E8E6
-:105CE000060036322800CB07003A02EC0600369256
-:105CF00000000000D301001CD9C1913400820000D3
-:105D0000001002E0A6CD913200A00000002C02E8B5
-:105D1000060036323400CB07003A02EC0600369219
-:105D200004000000003C02EC0600363228000000AF
-:105D300000000000890D923A0000C70780D601805C
-:105D400042C06EB600860000001002E0A6CD91327F
-:105D500004A00000002C02E8060036321400CB0735
-:105D6000003A02EC0600369200000000D301001C4D
-:105D7000D9C1913400860000001002E0A6CD913216
-:105D800004A00000002C02E8060036322000CB07F9
-:105D9000003A02EC0600369212000000003802ECD5
-:105DA00086CD913A08000000002802E88624903948
-:105DB00000000000002002E09624143700000000DC
-:105DC000004001E0068091320000D107040100800C
-:105DD000028092BC0000000000C001E0060000321A
-:105DE00000000000003000E006000032000000006B
-:105DF00000B000E0060000322000000000000000BB
-:105E0000070036320000000000000078A9002D379E
-:105E10000045000000080000878D973A0000000050
-:105E20000000007899C02C370001000000000078C5
-:105E3000898D973A000036100210000087BF97BA8C
-:105E400000000000001800000740FE320000DA07E2
-:105E500012000048F2C138B40000DE0780D7012CE0
-:105E600009C06EB200000000DAD701EC06C06E3542
-:105E700000000000005A01EC0640ED320000000076
-:105E8000005C01E806808B320000E10780010080A1
-:105E900062C092B600000000000000F882812F343A
-:105EA00018003600000000F8730A03F90000000033
-:105EB0000004013808C06E3200000000006201ECEE
-:105EC00006808332010093071201002C82CD2EB28E
-:105ED0000000E407000000800200009000000000C5
-:105EE000005401FC02C06E3200000000000000D827
-:105EF0000280013200C0EC071801000CA8CD3EB2B0
-:105F00002080000000000008088036322D002F039A
-:105F10001201002C82CD2EB20000EA0700000080A2
-:105F200002000090000000000062013808C06E32DC
-:105F300000080080000000280900373200604B0F85
-:105F400000000008088036F200009307040601EC08
-:105F500016C06EBC000093078000008072812FB6CF
-:105F600000000000000000F872812F343D0093070C
-:105F70001201002C82CD2EB20000F207000000803A
-:105F8000020000900000F507000000F8B2812F9495
-:105F90000000CF0F00A0001808006EF200002510CE
-:105FA0000078016008006EF20000F907120100C8D5
-:105FB000020020B20000FC070000008002000090F8
-:105FC000000006081201005C088020B20000FC07F7
-:105FD0001201006002802CB20000FA07000000806D
-:105FE000020000900000FE0704000080024080BC18
-:105FF00000000000000000F81F80FF3A00000008C9
-:1060000080010080A2802FB618003600CA0000F878
-:10601000730A03F9000093078000008072812FB695
-:106020003D0001081200002C82CD2EB20000930723
-:10603000000000F872812F940000FC07120000C8D5
-:10604000020020B20000FA071200005C088020B2B3
-:106050000000361004A0001808006EB20000000016
-:106060000000007879613832000007081218024CED
-:10607000E2256EB2080000000010020078E16E39DF
-:106080000000000000180020070000320700000098
-:106090000000003878CAE939000036100400003CDE
-:1060A000084080B2000036100490006C08006EB208
-:1060B000000000000098004C08006E320000000054
-:1060C000510000D802000032000000004D00000026
-:1060D00067E0833E000000000008000007008032F7
-:1060E000000000000010000007C086320000000021
-:1060F0000018000007C084320000000000000018F3
-:10610000D8A0813C0000680804B000E0D6206EBC36
-:10611000000038080400003CD8E083BC00001E08E2
-:106120008000008092802FB6000019081201000044
-:1061300009C021B218003600000000F8730A03F904
-:106140001D0000000000007809A4173800001D0899
-:1061500004010080128097BC00001808670000F856
-:10616000A2802FB5000019080000000009C021928C
-:1061700000000000C90100D802408432000021085C
-:106180000400008072802DBC00001F081200004433
-:10619000E2E038B200002C08510000D812802D9A9D
-:1061A0000000000000000078F9818334000022081C
-:1061B00012000044E2E538B20000260880000080AA
-:1061C00082802FB60000550F00A0015008006EF22B
-:1061D0000000000000F801E00600853200002808F9
-:1061E000120100E802C021B218003600000000F8D9
-:1061F000730A03F900002B080401008002802DBC03
-:1062000000002708670000F8A2802FB500003610B4
-:10621000120000E802C021B200000000510000D8C6
-:1062200002000032000030082A010000D82080BAA5
-:10623000000030081201000009C021B21800360029
-:10624000000000F8730A03F900000000000000D805
-:106250000240843200000000CAE0006C08006E3288
-:106260000000000000E8004C08006E32000036100C
-:1062700004F0001808006EB20000000000000038B2
-:106280001881833500000F0804B00080829B81BC18
-:1062900000000000CA0100F842802F3508A00F0856
-:1062A00012010040A2CD39B2000036080000008083
-:1062B0000200009000004008293402B808806EB245
-:1062C00000003B081201000009C021B2180036008E
-:1062D000000000F8730A03F91D00000000000078B8
-:1062E00009A4173800003F0804010080128097BC01
-:1062F00000003A08670000F8A2802FB500003B08B4
-:106300000000000009C0219200000000C90100D86F
-:10631000024084320000000000000078F9818334DC
-:106320000000410812000044E2E538B200004708CE
-:106330002800006CD8E086BA0000540F00A001507D
-:1063400008006EF2000047081DF801E0060085B263
-:10635000000047088000008002812FB62A0000005C
-:10636000D001002C82CD2E3200004A0804A000E0AB
-:10637000068081B200003610049000E006C086B2AC
-:1063800000005808009800E006C0849200004F0802
-:1063900080010080A2802FB600004D08120100008D
-:1063A00009C021B218003600000000F8730A03F992
-:1063B0001D004F080401008002A417B800004C081B
-:1063C000000000F8E2802F940000361004E0006C1A
-:1063D00008006EB200000000CAE8004C08006E32EF
-:1063E0000000361004F0001808006EB200005508D6
-:1063F00004B00080829B81BC00000000CA0100F84C
-:1064000042802F3508A0540812000040A2CD39B2B6
-:106410000000000000A000E00680813200000000C3
-:10642000009800E006C0843200003610049000E0BE
-:1064300006C086B200005D082A5D01E806808BB2C6
-:1064400000005B081201000009C021B218003600EC
-:10645000000000F8730A03F91D005D0804010080C4
-:1064600002A417B800005A08000000F8E2802F9438
-:1064700010246008370000F8A28D2FB13D005E089F
-:106480001200002C82CD2EB200000000000000F8A7
-:1064900072812F3408000000CA1C01E8762081397F
-:1064A0000000FA0D0000002CF90100F4000065085E
-:1064B00080000080E2802FB6000065081201000015
-:1064C00009C021B218003600000000F8730A03F971
-:1064D000100000000018008067A1733930003203FB
-:1064E0001201005CA28D2CB200003610000000806A
-:1064F0000200009000006B088000008092802FB6A0
-:1065000018003600000000F8730A03F900000000CC
-:10651000C90100D802408432000036102A000078F9
-:10652000F98183B400006C0812000044E2E538B23F
-:106530000000DC0E00000030030038F2000071089B
-:106540001D000038188183B50000710880000080AC
-:1065500002812FB62A000000D001002C82CD2E32FD
-:1065600000007408040601EC16C06EBC00000000B8
-:10657000CA0100F842802F3408C07308120000409E
-:10658000A2CD39B2000077088000008082802FB64B
-:106590000000550F00A0015008006EF2000000003E
-:1065A00000F801E0060085320000790812010000C1
-:1065B00009C021B218003600000000F8730A03F980
-:1065C000000095082A3502B808806EB200007C08E9
-:1065D0001201000009C021B218003600000000F8C6
-:1065E000730A03F900000000000000F8A2802F35B4
-:1065F00000008E0804000080026180BC0000870853
-:1066000080B8000009C06EB240008208040000801B
-:10661000820D90BC0000820802B00080821B84BC06
-:1066200000008708000000F8B2812F9400000000ED
-:1066300000D601EC56C06E3400000000000000607F
-:106640001800863A0000000000000080B70178348E
-:1066500000000000007801E0060086324000950846
-:1066600004000080820D90BC0000361004A00018C9
-:1066700008006EB20000CF0F00000000D82080FAA2
-:10668000000036100600003C182084BC00003610C4
-:1066900004B0003C88DB83BE0000000000000080E6
-:1066A000F720783A00000000587801E0F620863A9A
-:1066B00000000C0800000004F860809A00009108B7
-:1066C00080B9000009C06EB22F0095081201002C9D
-:1066D00082CD2EB200008F080000008002000090E2
-:1066E0004000930804010080820D90BC380094089B
-:1066F00000000078090036923900000000000078A0
-:1067000009003632000094081200002CE2E52EB297
-:10671000100000000018008067A17339000000001D
-:10672000005C01E806808B3210240000000000F8B5
-:10673000A28D2F31300093071201005CA28D2CB284
-:1067400000003610000000800200009000000308E6
-:10675000000000F8C2812F9500000000005401FCE9
-:1067600002C06E3200000000000000D8028001323A
-:1067700000C0A1081801000CA8CD3EB22080000086
-:1067800000000008088036322D002F031201002C73
-:1067900082CD2EB200009F08000000800200009011
-:1067A000000000000062013808C06E32000800805E
-:1067B000000000280900373200604B0F000000087D
-:1067C000088036F20000AF08000000800200009050
-:1067D0000000A70880000080C2812FB60000AA0830
-:1067E00000D001E80600009200000000000000F860
-:1067F000C2812F350000AA0804D1018002806EBC3E
-:106800000000000000D601EC26C06E340000AC0889
-:106810008000008092812FB60000AF0800C801E818
-:106820000600009200000000000000F892812F3561
-:106830000000AF0804C9018002806EBC00000000A7
-:1068400000D601EC16C06E34110093071201002C23
-:1068500082CD2EB20000AF08000000800200009040
-:10686000000093079A0100F842812FB50000B80894
-:10687000120100C8020020B200000000005C01EC20
-:106880000640003200009307370000F842812FB421
-:1068900000000000000000F872812F343D009307D3
-:1068A0001201002C82CD2EB20000B608000000803C
-:1068B000020000900000C3081201005C088020B2B2
-:1068C0000000B3081201006002802CB200003610F4
-:1068D00000000080020000900000C008120100C803
-:1068E000020020B200009307370000F8D2812FB4D5
-:1068F00000000000000000F872812F343D00930773
-:106900001201002C82CD2EB20000BE0800000080D3
-:10691000020000900000C3081201005C088020B251
-:106920000000BC081201006002802CB2000036108A
-:1069300000000080020000900000000000000078CD
-:10694000796138320000C4081218024CE2256EB298
-:1069500000000000003402B808806E320000000021
-:1069600000A0015008006E320000000000780160B5
-:1069700008006E320000CA089D11023409006EB290
-:106980000000000000F0018808006E3200006C0F6B
-:1069900000A8010809006EF200000000D4F801E030
-:1069A0000600853200000000DA5C01E806808B32C8
-:1069B0000000DC0EDD000030030038F20000D008DB
-:1069C0002329020409806EB23E00CF081200002C79
-:1069D00082CD2EB20800D3081D1C01E8762081B9B3
-:1069E0000000D3088000008002812FB62A0000003A
-:1069F000D001002C82CD2E320000FA0D0000002CB8
-:106A0000F90100F40000D7089D010080074093B20F
-:106A10000000000000300080078088320000000085
-:106A2000003800800700EE320000000000080080FF
-:106A300007C085320000000000100080074090323F
-:106A40001000000000180080878D853700000000CE
-:106A5000002000800700863200000000002800802F
-:106A6000070085320000DE081201000009C021B2D3
-:106A700018003600000000F8730A03F930003203F2
-:106A80001201005CA28D2CB20000361000000080C4
-:106A9000020000900000000000CC017809806E32F6
-:106AA00000009307DCD101E806809792130093075A
-:106AB0001201002C82CD2EB20000E20800000080FE
-:106AC000020000900000BA0D00000018094081F299
-:106AD0000000A30D00A8012009006EF2000093073A
-:106AE00080010080F2802FB60000EC08120100C87F
-:106AF000020020B2000093078000008072812FB650
-:106B000000000000000000F872812F343D00930760
-:106B10001201002C82CD2EB20000EA080000008095
-:106B2000020000900000C3081201005C088020B23F
-:106B30000000E8081201006002802CB2000036104C
-:106B4000000000800200009000009307350100F86B
-:106B500012812FB500000000000000D80280013231
-:106B600000000000005401FC02C06E3200C0F608B4
-:106B70001801000CA8CD3EB220800000D101000811
-:106B8000088036323B0031031201002C82CD2EB238
-:106B90000000F40800000080020000900000440F94
-:106BA0000098012809006EF20000930700000080A1
-:106BB000020000900000FE0880010080A2812FB634
-:106BC0000000FE088000008042812FB60000FE0811
-:106BD000085B01EC06FB6EBC00000000005A01ECF3
-:106BE000060000320000FE08370000F842812FB492
-:106BF0003D000000D701002C82CD2E320000040998
-:106C00008001008092812FB600000A0908C901E8BE
-:106C100006BB6EBC0000000000C801E806000032A0
-:106C2000330001091200002C82CD2EB20000510F5A
-:106C300000000028098001F2000093070000008096
-:106C40000200009000000A0980010080C2812FB676
-:106C500000000A0908D101E806BB6EBC0000000074
-:106C600000D001E806000032330007091200002CB2
-:106C700082CD2EB20000510F0000002809C001F2A1
-:106C800000009307000000800200009000009307BE
-:106C900080010080F2812FB6180093070000002CBD
-:106CA00082CD2E9200000F09120000C8020020B20F
-:106CB000000012091201005C088020B200003610AA
-:106CC0001200006002802CB200000000000000F8FA
-:106CD0001F80FF3A000031031201002C72E02EB237
-:106CE0000000100900000080020000900000000079
-:106CF0000000007879613832000013091218024C44
-:106D0000E2256EB200000000003402B808806E3246
-:106D100000000000D4A0015008006E320000000006
-:106D2000DB79016008006E320000550FDD000004C1
-:106D3000080000F21000000000180080878D8537E1
-:106D40000000000000F801E00600853200001C0988
-:106D50001201000009C021B218003600000000F83E
-:106D6000730A03F9300036101200005CA28D2CB2B9
-:106D700000003610040701EC16C06EBC00000000D5
-:106D800000B000E00600003200009307DA5C01E882
-:106D900006808B92000093079F41018052206EBCB9
-:106DA00000002B099F98018052206EBC000000005B
-:106DB000000000D80280013200000000005401FCF5
-:106DC00002C06E3200C029091801000CA8CD3EB2E5
-:106DD0002080930731000008088036B200000000D0
-:106DE000000000F812812F343B0093071201002CA1
-:106DF00082CD2EB200002709000000800200009022
-:106E00000000440F0098012809006EF2000093076B
-:106E1000000000800200009000009307D54101E0CF
-:106E2000064081920000930704B0008002006EBC0F
-:106E3000000000000090010008006E3200002510E4
-:106E40000078016008006EF20000930700000080E7
-:106E50000200009000000000000C027809806E32F1
-:106E60000000330904D4018012C06EBC0000000091
-:106E7000000000781980973700000000009001E0C2
-:106E8000E6256E3A0000251000000080020000F0A8
-:106E90000000370900000080020000900000930706
-:106EA000009001E00600809200000000009001E0E8
-:106EB00006008032000003080000008002000090FD
-:106EC0000000A30D00A8012009006EF20000E708F1
-:106ED00080000080F2802FB6000093070000008041
-:106EE0000200009000000000000000D80280013283
-:106EF000000000000000007809006E320200410925
-:106F000004B9008082CD6EBC00004309800000807F
-:106F10007280FCB600004509000000FC02000092EF
-:106F200000004309800000808280FCB60000450913
-:106F3000000000FC0200009200000000000000A819
-:106F400042BD973000000000541889FCF2C07C302C
-:106F500000C04B091801000CA8CD3EB20000000093
-:106F6000000E01EC0600003400000000005401ECAB
-:106F700006C02F3220800000000000080880363252
-:106F8000000031031201002C82CD2EB2000049090D
-:106F90000000008002000090000000000062013844
-:106FA00008C06E3200080080000000280900373257
-:106FB00000004B0F00000008E80100F4000036104C
-:106FC000040701EC16C06EBC00000000000000A821
-:106FD000A2002D370A0000000000007809003632B8
-:106FE00000000000001889E007000032000051098D
-:106FF00004010078198097BC02005C0904B9008084
-:1070000082CD6EBC00000048D6010078C9CD2C327C
-:1070100000005509B6000080020000B000005609CB
-:1070200012000064028097B2000057091208006441
-:1070300002006EB2000058091218006402006EB21D
-:10704000000059091210006402006EB20000000036
-:10705000A65401EC06C02F3200008C07000E01EC94
-:10706000060000940020004CD6010078C9CD2C32D7
-:1070700000005D09B6000080020000B000005E095B
-:1070800012000064028097B200005F0912080064D9
-:1070900002006EB2000060091230006402006EB29D
-:1070A000000061091238006402006EB2000062093B
-:1070B0001240006402006EB20000630912480064CE
-:1070C00002006EB2000064091210006402006EB289
-:1070D000000065091218006402006EB20000660923
-:1070E0001220006402006EB20000670912280064DA
-:1070F00002006EB200000000A65401EC06C02F3260
-:1071000003008C07000E01EC060036920000000020
-:10711000000000FC0200013200006D0900000014B4
-:1071200008803D9200000000000000FC02000132D7
-:1071300000007009040000DC53603DB3180000003B
-:10714000000000F8738A03396C093600000000C0A3
-:107150000200369200000000005401FC02C06E32B2
-:1071600000000000000000D80280013200C0760953
-:107170001801000CA8CD3EB22080000000000008DD
-:107180000880363215002F031201002C82CD2EB25A
-:107190000000740900000080020000900000000060
-:1071A000002800000700003200000000003000004E
-:1071B00007C02C3200100082003800000700373270
-:1071C000000079091200004802C080B200008C075C
-:1071D000CA010008E80100942D007B091200002C70
-:1071E00082CD2EB200007E091D010080020000B099
-:1071F00000008C07000000F862812F95000000005D
-:10720000000000F802812F342A008C071201002CA4
-:1072100082CD2EB200007F090000008002000090A5
-:1072200000003F0F0000002C09C085D20000DC0EDA
-:1072300000000030030038F200003103230100F8A1
-:1072400022812FB43E0031031201002C82CD2EB2D8
-:1072500000008409000000800200009000003F0F41
-:107260000000002C09C085D200003103000000F8A6
-:1072700022812F9400008D09380100D8028001B2CC
-:1072800000008B091E000080020000B000008D0984
-:107290001A010080020000B000008C0F000000689E
-:1072A0001F80F6FA00003103000000800200009009
-:1072B0000000910912010060084023B20082000022
-:1072C000000000080880363200008C0F00000064C7
-:1072D0001F40F6FA00003103000000800200009019
-:1072E0000000361012000024080023B200003610FF
-:1072F0001200002008C023B200003610120000184F
-:10730000088023B200C09C091801000CA8CD3EB231
-:107310000000940912000038028081B2000036108B
-:107320001200003C020082B2000036101200003051
-:10733000024082B20000361012000034020086B211
-:1073400020800000000000080880363200008C0F0A
-:107350000000005C1FC0F5FA00003103000000804F
-:107360000200009000000000450000D8020000323A
-:107370000000000000000000074080320000000014
-:1073800000100000074082320000000000180000DA
-:10739000070086320000A00912000050F2C138B484
-:1073A0000000640D003001E016206EFA0000A5090F
-:1073B0003801002CF8010BB40000A509020D028071
-:1073C000A25B80BC000000000000002CC8C1823419
-:1073D0000000A7098000008042812FB60000940DB4
-:1073E00000000080020000F00000AD0D00A801E0E8
-:1073F00016206EFC0000AC09270100D8028001B203
-:1074000000000000C700002CE8C08234000000002B
-:1074100000000008D801003400000000D54001E061
-:10742000060087320800990F001801E8762081F9DC
-:107430000000DC0E00000030030038F20000B0094C
-:1074400023190000078081B23E00AF091200002C12
-:1074500082CD2EB20000B2091D210000070082B2C9
-:107460000000B409000000F862812F950000B40903
-:107470008000008002812FB62A000000D001002C7D
-:1074800082CD2E320000FA0D0000002CF90100F42C
-:107490001000B8092C30000017E02CB90000BA0920
-:1074A0008E39000007C082B20000BA09000800004F
-:1074B000070087920000BA098E390000B7C182B474
-:1074C0000000000000080000070087320000BC092F
-:1074D000120100E802C021B218003600000000F8D6
-:1074E000730A03F90000BA099F010014184081BC17
-:1074F0000000BF090400008002C085BC00003610F7
-:107500001200006802C585B00000BF0912000048E3
-:1075100002C080B200003203CA010008E8818094F2
-:107520000000C3091E000080020000B00000C50971
-:107530001A010080020000B000008C0F00000068FB
-:107540001F80F6FA00003103000000800200009066
-:10755000000036109FA801E016206EBC0000640DEC
-:1075600000000014080000F20000C909800000803B
-:1075700042812FB60000940D00000080020000F050
-:107580000000AD0D00000080020000F000008E073A
-:1075900004000080024081BC0000CD09120100E817
-:1075A00002C021B218003600000000F8730A03F987
-:1075B00000008E071201006802C585B00000361079
-:1075C000000000800200009000008C078000008016
-:1075D000F2C185B60000D3091C41028006C085B205
-:1075E000000000000000006802C5853000000000B7
-:1075F000000000701F00F73A00008C07000000F840
-:1076000022812F9400008C0780000080F2C185B693
-:1076100000003F0F0000002C09C085D2000031039C
-:10762000D20100941E40E99A0000C40F0020001807
-:1076300008006EF20000DB091F000080020000B0AD
-:107640000000D8099E400278094068B20000361058
-:1076500000000080020000900000DF09800100802F
-:1076600082812FB600008E072A3101E0060000B2A9
-:1076700018000000CA0000F8730A03398E073600AC
-:10768000000000C00200369200008E0780010080DA
-:10769000A2802FB618000000CA0000F8730A033950
-:1076A0008E073600000000C0020036920D00E5098A
-:1076B00000000058080036920000E509000000585C
-:1076C000080000921B00000000000058080036323D
-:1076D0000000C40F0020001808006EF20000000037
-:1076E0000030002808006E3200000000545401FCF5
-:1076F00002C06E320000300A380000A4088082B256
-:107700000000300A0428010408006EB200003610A0
-:107710009F500104A85B80BC00000000005001E8FD
-:10772000060000320000110A0801007819A082BC8E
-:1077300000000000002801E0A660803C0000F00985
-:107740002A010014080000B200000000CA00001462
-:107750001840813A0000A30D00A80120A9206EFA6C
-:1077600000000000002001E0A6206E3C00000000A8
-:10777000003000E0060000320000000000A801E038
-:107780000600923200000000000000D802800132A2
-:1077900000C0030A1801000CA8CD3EB20000FA098F
-:1077A00004000080024081BC0000000000000014C2
-:1077B0000800003218000000000000F8730A0339C6
-:1077C000F4093600000000C002003692208000005C
-:1077D00000000028098036320000F10E000000D8B9
-:1077E000020000D20000FE0904000080028092BC6A
-:1077F00018003600000000F8730A03F900000000CA
-:10780000000000D80280013200C0030A1801000CF9
-:10781000A8CD3EB218000000000000F8738A0339BA
-:10782000FE090000000000C00200363200003600F1
-:10783000000000800200009000000000DE00000850
-:10784000E801003400000000DF00013808C06E329B
-:1078500000000000001000000700003200000000DF
-:107860000018000007808232000000000030000095
-:1078700007C02C320020008000380000070037329B
-:1078800000000000CA3D000C0780833200000000A9
-:10789000000000141840813A00000F0A040201ECB5
-:1078A00016C06EBC00000000C00100141840813AF0
-:1078B00000000000000000F892802F3400C00E0A83
-:1078C00012000040A28D39B20000690A120100487E
-:1078D00002C080B200000F0A000000800200009089
-:1078E000000000000000002808809732000000001F
-:1078F000000000A408808232000000000010006C2C
-:1079000018206E3A000000000018004C08006E328B
-:107910000000A30D00A8012019206EFA000000004D
-:10792000002001E016206E3C0000000000A801E0ED
-:107930000600923200001B0A003801E006408092E7
-:10794000000000000060006C18206E3A000000008B
-:107950000068004C08006E3200001D0A9F01000400
-:10796000686080BC0000240A000000181820009CF9
-:1079700000001F0A120100E802C021B21800360000
-:10798000000000F8730A03F900000000CA70001834
-:1079900008006E320000190A02010080626080BC9B
-:1079A00000000000CA0100F802802F3500A01B0A69
-:1079B00012010040A28D39B20000220A00000080AE
-:1079C000020000900000280A80000080A2802FB6EC
-:1079D00000002B0A04000080A2A081BC000000006F
-:1079E000CA0100F802802F3500A0270A12000040CB
-:1079F000A28D39B200000000000000F8A2802F35EF
-:107A000000002B0A120100E802C021B21800360063
-:107A1000000000F8730A03F900000000002801E0EC
-:107A20000600003200000000003000E006808232D4
-:107A300000000000002000E00680813200003610C7
-:107A4000041000E006C086B20000320A001800E010
-:107A500006C08492000036100410006C08006EB25C
-:107A6000000000000018004C08006E320000E00D1D
-:107A7000510000D8020000F20000350A0050013C1D
-:107A8000A85B809C00008E07003001E00600009299
-:107A900000003A0A3E510100A81B80BA0000000015
-:107AA000DE0000F8F2812F3400000000005801ECE5
-:107AB00006C0EE3200003A0A80010080328087B6AC
-:107AC00000000000000000F8E2802F340000730E78
-:107AD000603001E0060000F200008E070000008028
-:107AE00002000090000000000000001408000032B6
-:107AF0000000430A040201EC16C06EBC0000000046
-:107B0000C90100141840813A00000000C00101388A
-:107B100008C06E3200000000DF0000A4A8608A3CAC
-:107B200000C0460A12010040A28D39B20000410A8D
-:107B3000000000800200009000000000003000E023
-:107B40000600003200000000DF0000A4A8608A3CAC
-:107B5000000000000000013808C06E320000000084
-:107B6000DEA8012099226E3A0000490A2F2001E088
-:107B700096226EBC0000A30D00000080020000F001
-:107B800000004D0A1F5001E8060000B200004C0A38
-:107B90000400008002C083BC00004D0A005001E8D0
-:107BA000F660809C0800000000400268129AFE38CF
-:107BB0000000510A2AA901E0060092B2180036001E
-:107BC000CA0000F8730A03F91D00510A040000807E
-:107BD00002A417B800004E0A000000141840819C4F
-:107BE0000000DC0E00000030030038F20000540AF0
-:107BF0008001008032802FB63E00530A1200002C14
-:107C000082CD2EB200000000000000D802800132B8
-:107C100000C0650A1801000CA8CD3EB2208000000B
-:107C2000C3000028098036320000F10E000000D8A1
-:107C3000020000D200005A0A04000080028092BCB8
-:107C400000000000000000141840813A00005F0AA4
-:107C500004000080024081BC18003600000000F8DB
-:107C6000730A03F90000630A04000014184081BC81
-:107C700000005B0A1200000009C021B200005C0A8B
-:107C8000000000800200009018003600000000F89C
-:107C9000738A03F90000DC0E00000030030038F2A4
-:107CA0000000630A8001008032802FB63E00620A25
-:107CB0001200002C82CD2EB200000000C30000D8BC
-:107CC0000280013200C05F0A1800000CA8CD3EB24D
-:107CD0000020008000000028090037320000B10FAA
-:107CE00000000008E80100F40000670A12000048E4
-:107CF00002C080B200000000000000141840813A69
-:107D000018003600CA0000F8730A03F90000690A77
-:107D100004010014184081BC0000990F000000808D
-:107D2000020000F000006F0A8001008092802FB6F0
-:107D30002B00720A1201002C82CD2EB200006D0AB7
-:107D400000000080020000900000720A1D00008008
-:107D5000020000B00000720A8000008002812FB68D
-:107D60002A000000D001002C82CD2E3200008C07AA
-:107D700004000080028085BC0000AA0F0000008083
-:107D8000020000F000007D050000001C08808592C4
-:107D900000000000CE0100D80280013200C07A0A43
-:107DA0001801000CA8CD3EB22080000000000008A1
-:107DB0000880363200008C0F0000005C1FC0F5FA0E
-:107DC000000031030000008002000090000000006D
-:107DD000600000D80200003200007F0A3F00003C33
-:107DE000084080B200007F0A80010080E2812FB647
-:107DF00000000000DE0000F8F2812F3400000000D7
-:107E0000005801EC06C0EE32000000004D000000FA
-:107E100067E0833E00000000000800000700803299
-:107E2000000000000010000007C0863200000000C3
-:107E30000018000007C084320000BE0A04000028B9
-:107E4000D8A082BC0000000000000018D8A0813C2F
-:107E500000009C0A0400003CD8E083BC0000890AB2
-:107E60000400008072802DBC0000870A12000050C0
-:107E700002C038B200009A0A510000D812802D9A30
-:107E80000000890A12000050F2C138B40000950ABF
-:107E9000280000D8020000B20000920A8001008091
-:107EA000F2C185B600008F0A1F400284E60100B4CB
-:107EB0000000920A1D0100F822812FB40000920AEE
-:107EC000000000F862812F950000910A1D010080DA
-:107ED000020000B000000000000000F862812F35B1
-:107EE0000000000000400280024068320000940A56
-:107EF000343000E016206EBC0000940D00000080BD
-:107F0000020000F00000AE0DDA5B01EC0640EDF27D
-:107F100018003600000000F8730A03F90000990AFF
-:107F20000400008072802DBC0000950A670000F8F4
-:107F3000A2802FB500003610120000E802C021B266
-:107F400000000000510000D8020000320000E80DDF
-:107F500000000000D82080FA0000800A4D000000D8
-:107F600067E0839E00009C0A12000050F2C138B402
-:107F70000000A80A28000080084000B20000A50AFE
-:107F800080010080F2C185B60000A20A1F40028471
-:107F9000E60100B40000A50A1D0100F822812FB4FB
-:107FA0000000A50A000000F862812F950000A40AD5
-:107FB0001D010080020000B000000000000000F879
-:107FC00062812F35000000000040028002406832CC
-:107FD0000000A70A343000E016206EBC0000940DAB
-:107FE00000000080020000F00000AE0DDA5B01EC42
-:107FF0000640EDF20000BF0A80000080E2802FB64C
-:108000000000AC0A042100E0068081B20000E80D07
-:1080100000000034080000F200000000002000E032
-:10802000068081320000B10A2A1100E0D6E086BA4B
-:1080300018003600CA0000F8730A03F91D00B10ADF
-:108040000401008002A417B80000AD0A9F0100805F
-:10805000180088BC0000361000000080020000906C
-:108060000000990F00000080020000F00000DC0E0C
-:1080700000000030030038F20800B50A231901E8B7
-:10808000762081B93E00B40A1200002C82CD2EB2B7
-:108090000000B80A1D1800E006C084B20000B80A4B
-:1080A0008000008002812FB62A000000D001002C41
-:1080B00082CD2E320000FA0D0000002CF90100F4F0
-:1080C0000000BC0A04000080020088BC0000BC0A5A
-:1080D0001201000009C021B218003600000000F8AB
-:1080E000730A03F9000032031201006802C585B06B
-:1080F0000000361000000080020000900000BE0A60
-:1081000012000050F2C138B400000000C001013874
-:1081100008C06E320000C30A040201EC16C06EBC37
-:1081200000C0C10A12000040A28D39B20000C40A8A
-:10813000C90100140800009200000000453000E072
-:10814000060000320000CF0A28000008E80100B451
-:108150000000CC0A80010080F2C185B60000C90A87
-:108160001F400284E60100B40000CC0A1D0100F8A3
-:1081700022812FB40000CC0A000000F862812F9504
-:108180000000CB0A1D010080020000B000000000CA
-:10819000000000F862812F350000000000400280DE
-:1081A000024068320000CE0A8000008042812FB673
-:1081B0000000940D00000080020000F00000AE0DF1
-:1081C000DA5B01EC0640EDF200200080DF000028C1
-:1081D000090037320000B10FDE0000D8028001F242
-:1081E0000800990F001801E8762081F90000DC0EE4
-:1081F00000000030030038F20000D50A8001008042
-:1082000032802FB63E00D40A1200002C82CD2EB24E
-:108210000000D90A290801E406C02DB20000DE0AD8
-:108220001D000080020000B00000DE0A8000008017
-:1082300002812FB62A00DE0AD001002C82CD2E92B8
-:108240000000DB0A1201000009C021B2180036004C
-:10825000000000F8730A03F91D00DD0A0401008024
-:1082600002A417B80000DA0A000000141840819C2C
-:108270002B00DD0A1200002C82CD2EB20000FB0D77
-:108280000000002CF90100F40000E10A0401008064
-:10829000024081BC18003600000000F8730A03F9A0
-:1082A0000000E10A1200004802C080B20000320360
-:1082B0001201006802C585B00000E20A00000080DB
-:1082C0000200009000000000000000D8028001328F
-:1082D00000C0E90A1801000CA8CD3EB220800000C1
-:1082E000000000080880363200008C0F0000005C9F
-:1082F0001FC0F5FA0000310300000080020000906A
-:1083000000C00000000000F8A28D2F310000000026
-:10831000000000D802000032000000000000000051
-:108320000780813200000000000800000700803252
-:10833000000000000010000007C0863200000000AE
-:108340000018000007C084320000EF0A120000503D
-:10835000F2C138B40000F50A8000008082802FB698
-:108360000000000000000068A860803C00000000E1
-:108370000000003C084080320000AD0D0000000409
-:10838000088082F20000F60A1201000009C021B242
-:1083900018003600000000F8730A03F91D00F80AFF
-:1083A0000400008002A417B80000F50A000000F8DD
-:1083B000A2802F9500000000000000006820803A95
-:1083C0000000FC0A0400002868A082BC0000E80D40
-:1083D00000000080020000F00000EB0A000000D85E
-:1083E0000200009200000000000000D8028001326C
-:1083F0000020008000000028090037320000AD0F87
-:1084000000000008E80100F418003600CA0000F877
-:10841000730A03F90000060B040201EC16C06EBCDF
-:1084200000000000C00100F892802F3400C0040B4F
-:1084300012010040A28D39B20000020B0000008042
-:10844000020000902B00060B1201002C82CD2EB2F0
-:108450000000040B000000800200009000000000FB
-:10846000000000D8028001320000090B12010060F8
-:10847000084023B20082120B00000008A88D8092F1
-:108480000000361012000024080023B2000036104D
-:108490001200002008C023B200003610120000189D
-:1084A000088023B200C0210B1801000CA8CD3EB2F9
-:1084B00000000C0B12000038028081B20000361060
-:1084C0001200003C020082B20000361012000030A0
-:1084D000024082B20000361012000034020086B260
-:1084E0002080000000000008A88D80320000190BD9
-:1084F00080010080F2C185B60000160B1F40028487
-:10850000E60100B40000190B1D0100F822812FB410
-:108510000000190B000000F862812F950000180B75
-:108520001D010080020000B000000000000000F803
-:1085300062812F3500000000004002800240683256
-:10854000000036101200006802C585B000001C0B48
-:108550003400005C1FC0F5BA0000940D00000080DC
-:10856000020000F000001E0B8000008092802FB6F9
-:1085700000008E07003000E00600009200008E0729
-:10858000120100E802C021B218000000000000F84B
-:10859000730A03398E073600000000C002003692CD
-:1085A00000000000450000D802400032000000003A
-:1085B0004100000007808632000000000008000033
-:1085C00007008032000000000010000007408232E7
-:1085D0000000000000180000070086320000260B93
-:1085E00012000050F2C138B4000000000000007812
-:1085F000388087350000000000A001E016206E3AA8
-:10860000000000000000007809C58530000000006F
-:1086100000A801E016206E3C08000000D20100789E
-:10862000E9E58339180036101F410284E6A197B9A5
-:108630000000300B365101E816E083BC0000300B1F
-:108640001D010080020000B000000000000000F8E2
-:1086500062812F350000320B382101E0064080B2E4
-:1086600000000000003001E0064080320000000001
-:10867000000000D8028001320000350B34180000E1
-:10868000078081B20000940D00000080020000F01D
-:108690001000990F0030000017E02CF90010008046
-:1086A00000380000070037320000DC0E0000003008
-:1086B000030038F200003A0B8001008032802FB6B0
-:1086C0003E00390B1200002C82CD2EB200003F0B71
-:1086D00029210000070082B200003D0B12010000BA
-:1086E00009C021B218003600000000F8730A03F92F
-:1086F0001D00420B0401008002A417B800003B0BD0
-:1087000000000014080000920000420B1D3000E041
-:10871000060000B20000420B8000008002812FB6EC
-:108720002A000000D001002C82CD2E320000AA0FBA
-:108730000000002CF90100F40000FA0D000000F820
-:10874000A2802FF40000470B04000080024081BC8F
-:108750000000470B120100E802C021B218003600E9
-:10876000000000F8730A03F9000032031201004808
-:1087700002C080B20000470B0000008002000090A1
-:108780000000500B80010080F2C185B600004D0B47
-:108790001F400284E60100B40000500B1D0100F8E8
-:1087A00022812FB40000500B000000F862812F9549
-:1087B00000004F0B1D010080020000B0000000000F
-:1087C000000000F862812F350000000000400280A8
-:1087D000024068320000520B04000080024086BC58
-:1087E0000000D70F0090010809006EF2000007108A
-:1087F00000000080020000F00000590B330100D897
-:10880000028001B20000590B80010080B20172B6F3
-:108810000000590B9FF0018082DB87BC0000590BE0
-:108820009FF8018022216EBC0000000000E801E0FA
-:108830000600EE320000000000F001E006C08732C2
-:1088400008000000001801E87620813900005F0B65
-:1088500080010080D2802FB600005F0B04B0008042
-:1088600002006EBC00000000CD0000F872812F34C1
-:108870003D005F0B1201002C82CD2EB200005D0B7B
-:1088800000000080020000900000690B270901E44D
-:1088900006C02DB200C0630B1801000CA8CD3EB27B
-:1088A000000036101200006802C585B020808E07D7
-:1088B000000000080880369200000000004001E03F
-:1088C0000640883200000000D508000007408832CA
-:1088D000000000000030000007C02C320040008083
-:1088E000CA390000070037320000670B1200004849
-:1088F00002C080B20060000000000008088036322C
-:1089000000006C0B1D000080020000B000006C0B2A
-:108910008000008002812FB62A000000D001002CC8
-:1089200082CD2E320000FB0D0000002CF90100F476
-:10893000000032031201006802C585B00000361045
-:10894000000000800200009000000000545401FC70
-:1089500002C06E3200000000000000D80280013228
-:1089600000C0750B1801000CA8CD3EB2208000009D
-:108970000000000808803632000031031201002C8C
-:1089800072E02EB20000730B000000800200009025
-:108990000000C40F0020001808006EF2000036101E
-:1089A0001F30002808006EB200000000000000A484
-:1089B00008808232000036100410006C08006EB28D
-:1089C0000000E00D0018004C08006EF200007C0B67
-:1089D0000050013CA85B809C000036100000008025
-:1089E000020000900000000000500100A81B803A27
-:1089F00000000000510000D802000032000000001A
-:108A00004D00000067E0833E000000000008000009
-:108A100007008032000000000010000007C086320E
-:108A2000000000000018000007C084320000A60B00
-:108A300004000028D8A082BC00000000000000183C
-:108A4000D8A0813C0000940B0400003CD8E083BC1B
-:108A50000000880B0400008072802DBC0000860B93
-:108A60001200005002C038B200008E0B510000D836
-:108A700012802D9A0000880B12000050F2C138B409
-:108A800018003600000000F8730A03F900008D0B8F
-:108A90000400008072802DBC0000890B670000F884
-:108AA000A2802FB500003610120000E802C021B2EB
-:108AB00000000000510000D8020000320000920BBC
-:108AC0002A010000D82080BA0000920B1201000099
-:108AD00009C021B218003600000000F8730A03F93B
-:108AE00000000000000000D8024084320000F00DB9
-:108AF0000060006C08006EF200007F0B4D0000006B
-:108B000067E0839E0000940B12000050F2C138B45D
-:108B100018003600000000F8730A03F91D00990BD5
-:108B20000400008002A417B80000950B670000F84D
-:108B3000A2802FB5000036101200000009C021B23B
-:108B40000800361012400268129AFEB80000DC0ECF
-:108B500000000030030038F2000036101F00006CE7
-:108B6000D8E086BA0000E00D510000D8020000F203
-:108B700000009F0B0000003C08408092000036106F
-:108B8000000000800200009000007E0B04010080C5
-:108B9000028081BC0000A40B80010080A2802FB65F
-:108BA0000000A40B1201000009C021B21800360019
-:108BB000000000F8730A03F900000000000000D86C
-:108BC000024084320000F00D0060006C08006EF27C
-:108BD00000007F0B4D00000067E0839E0000000056
-:108BE000C001013808C06E3200000000453000E0CE
-:108BF000060000320000A80B12000050F2C138B489
-:108C00000000AD0B040201EC16C06EBC00000000B9
-:108C1000C90100141840813A00C0AD0B1201004098
-:108C2000A28D39B20000AB0B000000800200009062
-:108C300000C00000000000F8A28D2F3100000000ED
-:108C400000A8012099226E3A0000B10B2F2001E00C
-:108C500096226EBC0000A30D00000080020000F010
-:108C60000000B50B0400003CD8E083BC0000B40B4E
-:108C70009F3101E096226EBC00000000003001E050
-:108C8000060000320000B90B005001E8F660809C3D
-:108C90000800000000400268129AFE380000B80B7D
-:108CA0009F3101E096226EBC00000000003001E020
-:108CB0000600003200000000005001E8060000320B
-:108CC0000000000000A801E0060092321800360003
-:108CD000000000F8730A03F91D00BD0B04000080BA
-:108CE00002A417B80000BA0B000000141840819CC1
-:108CF00000000000000000D8028001320020008047
-:108D000000000028090037320000B10F0000000801
-:108D1000E80100F40000C00B1200004802C080B25D
-:108D20000000DC0E00000030030038F20000C40B2D
-:108D300023010014184081BA3E00C30B1200002C1E
-:108D400082CD2EB218003600CA0000F8730A03F96B
-:108D50000000C40B04010014184081BC0000990FEE
-:108D600000000080020000F00000CA0B2931010C55
-:108D700009006EB22B008C071201002C82CD2EB29E
-:108D80000000C80B000000800200009000009C0D55
-:108D9000000C020009806EF20000D30B000000807E
-:108DA000020000900000AA0F00000080020000F006
-:108DB000000000000000001C080090320000D20BF0
-:108DC00004000028098080B20000F10E000000D8E5
-:108DD000020000D20000D20B04000080028092BC8E
-:108DE00018003600000000F8730A03F900007D0542
-:108DF000000000080800009200008C071D000080A1
-:108E0000020000B000008C078000008002812FB6B5
-:108E10002A00D50B1200002C82CD2EB200008C0748
-:108E2000000000F802812F940000BA0D0000001825
-:108E3000094081F20000A30D00A8012009006EF294
-:108E4000000000000030010C09006E3200009C0D93
-:108E5000000C020009806EF200008E070000008006
-:108E6000020000900000990F00000080020000F056
-:108E70000000AA0F00000080020000F000007D0545
-:108E80000000001C0800909200000000545401FCF7
-:108E900002C06E3210000000000000A8780B1638E7
-:108EA00008000000000000AC780B1638000000003D
-:108EB000000000B0A8002D3700440000000000B002
-:108EC000880D8B3A00000000005001B408806E321B
-:108ED0000000ED0B0431019008006EB202000000AA
-:108EE000000000C8828D8A3700000000000000C822
-:108EF000C2A22C3A1800EB0B86410278880D78B696
-:108F00000000E60B9F0100A818808ABC9F00E60BBA
-:108F1000000000A808003692000000000040020493
-:108F2000B83F78300000FB0B00000004D862809C42
-:108F300002000000000000C8828D8A370000000097
-:108F4000000000C8C2A22C3A1800F20B8641027839
-:108F5000880D78B60000ED0B9F0100A818808ABC30
-:108F60009F00ED0B000000A8080036920000F40BF3
-:108F700028400204B83F78B000000000C801000497
-:108F8000D862803C0000F80B02010090182089BCD8
-:108F900000000000000000B4080000320000ED0BEB
-:108FA0009F0100A818808ABC9F00ED0B000000A85C
-:108FB000080036920000FB0B04000090182089BACC
-:108FC000000036109F000004486280BC000036108C
-:108FD000900000B448628BBA0300361004400200CF
-:108FE000081EFFB80000030C00000000D822809A81
-:108FF0000000280C04000080A2E28ABC02000000ED
-:10900000000000C8828D8A3700000000000000C800
-:10901000C2A22C3A1800260C86400278880D78B639
-:109020000000361004400204B83F78B00300361048
-:1090300004400200081EFFB80000070C1201006087
-:10904000084023B200820000000000080880363289
-:10905000000031031201002C72E02EB20000050C5A
-:109060000000008002000090000036101200002472
-:10907000080023B2000036101200002008C023B2FE
-:109080000000361012000018088023B20000000013
-:10909000000000D80280013200C0110C1801000C41
-:1090A000A8CD3EB200000B0C12000038028081B245
-:1090B000000036101200003C020082B200003610A0
-:1090C00012000030024082B200003610120000345C
-:1090D000020086B22080050C00000008088036924D
-:1090E00000000000000000D8020000320000000074
-:1090F00000380200B81B803A00000000643001E034
-:1091000016206E3A00000000000000000740803288
-:10911000000000000008000007008032000000008E
-:10912000001000000740823200000000001800001C
-:10913000070086320000180C12000050F2C138B44B
-:1091400000000000000000D8028001320000000092
-:10915000001800000780813200000000002000009D
-:1091600007008232100000000030000017E02C39A8
-:109170000000000000380000F7010B340000200C54
-:1091800080010080328087B60000000000380000B7
-:10919000B70170340000000000000008E80100344E
-:1091A00000002F0C020C0280A21B89BC18003600A4
-:1091B000000000F8730A03F90000DC0E0000003024
-:1091C000030038F20000240C1200004802C080B2F4
-:1091D00018003600000000F8730A03F90000FD0BC8
-:1091E0009F0100A818808ABC9F00FD0B000000A80A
-:1091F0000800369200002A0C8001008032802FB6D1
-:109200003E00290C1200002C82CD2EB200002C0C46
-:109210001D010080020000B000008C07000000F873
-:1092200062812F9500008C078000008002812FB69C
-:109230002A002D0C1200002C82CD2EB200008C07CB
-:10924000000000F802812F940000000000380000A8
-:10925000C70170340000DC0E00000030030038F25B
-:109260000800330C231901E8762081B93E00320C46
-:109270001200002C82CD2EB20000350C1D010080A2
-:10928000020000B00000380C000000F862812F9549
-:109290000000380C8000008002812FB62A00360CB6
-:1092A0001200002C82CD2EB200000000000000F859
-:1092B00002812F340000FA0D0000002CF90100F4A7
-:1092C00000003B0C120100E802C021B21800360079
-:1092D000000000F8730A03F900003B0C120000487C
-:1092E00002C080B200003203000000F8A2802F9478
-:1092F00000000000000000D80280013200000000E1
-:109300000030002808006E3200000000545401FCB8
-:1093100002C06E3200C0490C1801000CA8CD3EB24C
-:109320002080000000000028098036320000F10E85
-:10933000000000D8020000D20000460C04000080AB
-:10934000028092BC18000000000000F8730A033984
-:10935000470C3600000000C00200369218003600AC
-:10936000000000F8738A03F900000000000000D834
-:109370000280013200C0460C1800000CA8CD3EB29D
-:109380000020008400000028090037320000AD0FE3
-:1093900000000008E80100F400008C0700000080D5
-:1093A0000200009000000000000000D8028001329E
-:1093B00000000000545401FC02C06E3200C0520C88
-:1093C0001801000CA8CD3EB220800000000000086B
-:1093D0000880363200002F031201002C72E02EB2FA
-:1093E0000000500C00000080020000900000510FAF
-:1093F00000000028090002F200005A0C0000005C86
-:109400000800009200000000000000D80280013235
-:1094100000000000545401FC02C06E3200C05A0C1F
-:109420001801000CA8CD3EB220800000000000080A
-:109430000880363200008C0F0000005C1FC0F5FA77
-:1094400000003103000000800200009000000000D6
-:109450000030002808006E32002000840000002840
-:10946000090037320000AD0F00000008E80100F4E9
-:1094700000005F0C0000008002000090000000006F
-:1094800000000008080000320000650C04000080A5
-:1094900002C085B20000650C80000080F2C185B674
-:1094A0000000640C1C41028006C085B20000000070
-:1094B0000000006802C58530000000000000007058
-:1094C0001F00F73A00000000000000F822812F344E
-:1094D0000000DC0C80010080A2802FB61800000084
-:1094E000000000F8730A0339DC0C3600CA0000C023
-:1094F000020036920000AD0C8001008082812FB600
-:109500000000B20C1F20010809006EB20000AD0C73
-:1095100004300108899B90BC0000710C043101806B
-:1095200002006EBC0000E00D00000080020000F0B0
-:1095300000006F0C0050014808806E920000361049
-:109540000000008002000090000000000000000405
-:109550002861803C0000810C000000002821809AD6
-:109560000000E00D0030014808006EF20000740CAD
-:1095700000500104A85B809C0000361000000080B1
-:10958000020000900000000000500100A81B803A7B
-:1095900000007E0C0700004818A084BC08000000F2
-:1095A00000400200189AFE38000000000000006829
-:1095B000020080320000E00D00000080020000F098
-:1095C00000007B0C000000800200009000003610BC
-:1095D000000000800200009000007E0C07000048A0
-:1095E00018A084BC0800000000400200189AFE3851
-:1095F0000000780C00000068020080920000810CDE
-:109600000400004818A084BA000036109F0000042F
-:10961000286180BC00000000000000002821803A82
-:1096200000000000005401FC02C06E3200008A0CF1
-:1096300012010060084023B200820000D601000839
-:10964000088036320300361004400200381AFFB892
-:109650000300000000000078096080391800000055
-:10966000D241028CE6A1973900000000005001E8C9
-:1096700006808432290031031201002C82CD2EB2E3
-:109680000000880C000000800200009000003610EE
-:1096900012000024080023B200003610120000203F
-:1096A00008C023B20000361012000018088023B250
-:1096B00000000000000000D80280013200C0950CBC
-:1096C0001801000CA8CD3EB220800000D601000891
-:1096D0000880363200008F0C12000038028081B200
-:1096E000000036101200003C020082B2000036106A
-:1096F00012000030024082B20000840C12010034DB
-:10970000020086B2000036100000008002000090C7
-:10971000080000000040025C189AFE3800000000BB
-:10972000000000480800003200000000000000D8DF
-:1097300002000032000000000000000007408032FC
-:109740000000000000080000070080320000000058
-:1097500000100000074082320000000000180000E6
-:109760000700863200009C0C12000050F2C138B491
-:1097700000000000D60100D8028001320000000085
-:109780000018000007808132000000000020000067
-:1097900007008232100000000030000017E02C3972
-:1097A0000000A40C80000080328087B6001000808A
-:1097B00000380000070037320000A50C00000080D0
-:1097C00002000090001000880038000007003732C7
-:1097D00018003600000000F8730A03F900000000CA
-:1097E0000000006802C08532000000000000000890
-:1097F000E80100340000A80C1200004802C080B24A
-:1098000018003600000000F8730A03F90000E00DAC
-:1098100000000080020000F00000810C00000080C9
-:10982000020000900000B20C0000008002000090D6
-:109830000000E00D00000080020000F00000B00C0D
-:1098400000380200B81B809C0000B20C00000080B1
-:1098500002000090050000000000006802A0FE3831
-:109860000000AD0C00400280024068920000000041
-:10987000CA0100D8020000320000B50C04B8018013
-:1098800002006EBC0000000000B801E0861BEE3C48
-:109890004C0000000000000007003632000000000D
-:1098A00000000078A9002D37B44400000008000033
-:1098B000878D973A000000000000007899C02C378F
-:1098C000B400000000000078898D973A000036103F
-:1098D0000210000087BF97BA0000000000180000C7
-:1098E0000740FE320000BC0C12000048F2C138B440
-:1098F0000000BD0CB6000080020000B00020BE0CCD
-:1099000012000064A2CD2CB200000000A60000806E
-:10991000020000300000C20C80010080A2802FB63F
-:1099200018003600CA0000F8730A03F900008C071B
-:10993000005401FC02C06E9200000000005401FCC3
-:1099400002C06E320000C80C12010060084023B251
-:109950000082000000000008088036322900310330
-:109960001201002C82CD2EB20000C60C0000008037
-:10997000020000900000361012000024080023B2FC
-:10998000000036101200002008C023B2000036107C
-:1099900012000018088023B200000000000000D868
-:1099A0000280013200C0D30C1801000CA8CD3EB2D9
-:1099B0002080000000000008088036320000CD0C36
-:1099C00012000038028081B2000036101200003C04
-:1099D000020082B20000361012000030024082B253
-:1099E0000000C60C12010034020086B200003610DE
-:1099F00000000080020000900000E00D0000004820
-:109A0000080000F20800D60C0040025C189AFE988C
-:109A100000003610000000800200009000000000EE
-:109A200000500100A81B803A0000970C000000487D
-:109A30000800009200000000005401FC02C06E32D9
-:109A40000000510F00000028098002F20000BD0C48
-:109A500000000080020000900000510F000000286C
-:109A6000090002F20000DF0C9A0100F862812FB4B5
-:109A700010240000000000F8A28D2F31000000002B
-:109A800000D601EC06C06E342E008C071201002CAB
-:109A900082CD2EB20000DF0C00000080020000909A
-:109AA0000000E80C80010080F2C185B60000E50CE2
-:109AB0001F400284E60100B40000E80C1D0100F81C
-:109AC00022812FB40000E80C000000F862812F957D
-:109AD0000000E70C1D010080020000B00000000043
-:109AE000000000F862812F35000000000040028075
-:109AF000024068320000EA0C04980164881B87BCAD
-:109B00000000D70F0090010809006EF20000071056
-:109B100000000080020000F0000036101200006813
-:109B200002C585B000000000000000F8D2802F358B
-:109B300000008E07370000F8D2812FB4000000002B
-:109B4000000000F872812F343D008E071201002CB6
-:109B500082CD2EB20000EF0C0000008002000090C9
-:109B60000000F80C80010080F2C185B60000F50C01
-:109B70001F400284E60100B40000F80C1D0100F84B
-:109B800022812FB40000F80C000000F862812F95AC
-:109B90000000F70C1D010080020000B00000000072
-:109BA000000000F862812F350000000000400280B4
-:109BB000024068320000000000D401EC16C06E3A8A
-:109BC000000036101200006802C585B000008E0744
-:109BD00004B0008002006EBC37008E071201002C1A
-:109BE00082CD2EB20000FB0C00000080020000902D
-:109BF0000000040D80010080F2C185B60000010D57
-:109C00001F400284E60100B40000040D1D0100F8AD
-:109C100022812FB40000040D000000F862812F950E
-:109C20000000030D1D010080020000B000000000D4
-:109C3000000000F862812F35000000000040028023
-:109C4000024068320000100D000000800200009009
-:109C500000000C0D80010080F2C185B60000090DE6
-:109C60001F400284E60100B400000C0D1D0100F845
-:109C700022812FB400000C0D000000F862812F95A6
-:109C800000000B0D1D010080020000B0000000006C
-:109C9000000000F862812F350000000000400280C3
-:109CA000024068320000100D370000F8D2812FB456
-:109CB00000000000000000F872812F343D00100DFC
-:109CC0001201002C82CD2EB200000E0D000000808B
-:109CD000020000900000000000D401EC06000032F9
-:109CE00000008E071201006802C585B00000361022
-:109CF000000000800200009000008C0780010080BE
-:109D0000F2812FB600008C0780000080E2812FB620
-:109D100000008C07085901EC06FB6EBC0000000037
-:109D2000000000D80280013200000000545401FC01
-:109D300002C06E3200C01D0D1801000CA8CD3EB24D
-:109D400000000000005801EC06FB6E3A2080000085
-:109D5000000000080880363200002F031201002C9A
-:109D600072E02EB200001B0D000000800200009087
-:109D70000000AA0F000000F8E2812FF40000200D7F
-:109D80000603018012C06EBC19007D050000001C96
-:109D9000080036921A007D050000001C080036926B
-:109DA00000C00000000000F8A28D2F31000000006C
-:109DB000000000D802800132002000C0000000280E
-:109DC00009003732000000000030002808006E3221
-:109DD00000000000453000E0060000320000AD0F3A
-:109DE00000000008E80100F400002C0D040201EC62
-:109DF00016C06EBC00000000C90100141840813A72
-:109E000000000000000000F802802F3400C02C0D7C
-:109E100012010040A28D39B200002A0D000000801E
-:109E20000200009018003600CA0000F8730A03F917
-:109E300000002C0D9F010014184081BC00008E070B
-:109E40008001008092802FB62B008E071201002C1B
-:109E500082CD2EB200002F0D000000800200009085
-:109E6000000036101F0100D8028001B2000000007F
-:109E7000005401FC02C06E3200C03C0D1801000C01
-:109E8000A8CD3EB2208000000000002809803632B4
-:109E90000000F10E000000D8020000D20000390DD1
-:109EA00004000080028092BC18000000000000F84E
-:109EB000730A03393A0D3600000000C002003692E2
-:109EC00018003600000000F8738A03F90000000053
-:109ED000000000D80280013200C0390D1800000CCB
-:109EE000A8CD3EB20000AA0F000000D8024000F248
-:109EF00000F0430D1D400200A80D68B100003610AF
-:109F00001E400284060000B20000410D120000282D
-:109F1000020580B008003D0D000000F823400199C3
-:109F200000003D0D12010068020580B000003610EF
-:109F300000000080020000900000430DB50000808A
-:109F4000020000B000000000A50080A0360B6A35BA
-:109F5000000000000000005009C02932000000008D
-:109F60000056012808C06E32000000000000007892
-:109F7000390B2E320000000000000020F3819734DE
-:109F800000004C0D04000078D90130B6000000003C
-:109F900000000000B905303018000000000000F893
-:109FA00003A403390000000000000034330B2F32FB
-:109FB0000000590D04000078D90130B600000000FF
-:109FC00000000078B90530300000520D0400008018
-:109FD00042E529BC00000000000000F80200003249
-:109FE00018000000000000F8738A02390000000029
-:109FF0000000009C028097320000580D25010008E7
-:10A00000080000B20000560D12000028020580B0C2
-:10A010000800580D000000F8234001990000580D79
-:10A0200012010068020580B00000361000000080B8
-:10A030000200009000004C0D000000F402000092AD
-:10A0400000005D0D0400008042E529BC0000000016
-:10A05000000000F80200003218000000000000F8C4
-:10A06000738A0239000000000000009C0200953253
-:10A0700000000000CA0100D8028001320000000088
-:10A080000030000007C02C32001000A00038000093
-:10A090000700373200000000002000000700EE3209
-:10A0A000000000000038000C078082320000620DC2
-:10A0B0001200004802C080B2000032030000000815
-:10A0C000E801009400007A0D02000080A24280BCEA
-:10A0D00000007A0D80000080F2C185B600007A0D84
-:10A0E0001F400208B9BF68B000006C0D80410280BB
-:10A0F000E28168B608000000000000107961803934
-:10A1000000000000D22101E016206E3A1800000085
-:10A1100000400288E6219139000000000001005C47
-:10A1200008000072000000000000000C19A0903A26
-:10A1300000007A0D06010080D2FF90BC0000700D77
-:10A140002C410278F98168B400000000000000781A
-:10A15000B98197340300000000400200291AFF383B
-:10A160000000000000380200B91B903A0000000017
-:10A17000D241028816A0973A00000000450000D89E
-:10A1800002400032000036109F2001E016206EBA17
-:10A1900000000000000000000740803200000000C6
-:10A1A000000800002724903A000000000010000082
-:10A1B00007008A320000000012010058F2C1387412
-:10A1C0000000780D00000080020000900800840D5F
-:10A1D0001A000034796180B900008F0D1E010080E3
-:10A1E000020000B000008F0D1F400200094068B25D
-:10A1F00000007C0D80000080E20190B60000361067
-:10A20000380000541F40F5BA0000000000000008AC
-:10A21000B93F903000000000002801E026246E3A8B
-:10A22000080036101E00000009A4FEB800008F0DC3
-:10A2300012010068020590B0000036100000008096
-:10A240000200009000008F0D8000008082812FB6F8
-:10A2500000008D0D1F410200094068B2000000009F
-:10A26000002801E016206E3A00008A0D800100806F
-:10A27000F2C185B60000000000400284E60100340F
-:10A28000000000000000008002000030000000001C
-:10A29000004002800240683200003610380000544E
-:10A2A0001F40F5BA00000000002101E016206E7A80
-:10A2B0000000850D80000080E20190B600007E0D58
-:10A2C000000000541F40F59A000000000000005CF0
-:10A2D0000800003200000000D22101E016206E3A92
-:10A2E000180000001E410284E661937900003610D8
-:10A2F00000000080020000900000FFFF00000080CE
-:10A30000020000900000970D1D5D01EC16C06EBCB0
-:10A31000000000000F01008002000070000000003B
-:10A32000000100F8B2802F74000000000F010080CF
-:10A33000020000700000960D045E01EC16C06EBCB9
-:10A3400000000000005C01EC06400032000000004C
-:10A3500000010080020000700000FFFF000000808C
-:10A3600002000090000000000420018082DB907C4D
-:10A3700000000000020C0280A2DB907C0000A00D17
-:10A3800006210180821B90BC2700A10D0000000067
-:10A390000900369228000000000000000900363253
-:10A3A000000000000000008812002C3A0000FFFFAF
-:10A3B0000000008002000090000000002FA0017843
-:10A3C000891B927A0000000006880178899B977C9F
-:10A3D000000000000034020409C06E3D00000000CF
-:10A3E000000C020019A46E370000AB0D02000080C3
-:10A3F00002A497BC0000AB0D02000080020000B078
-:10A400000100000000000078898D973700000000EF
-:10A4100002010280829B977C00000000000100F88E
-:10A42000F2802F740000FFFF000000800200009007
-:10A4300000000000DA5B01EC0640ED320000B10DD7
-:10A4400004010080024086BC0000000000A001E082
-:10A4500016206E3A0000B30D00D401EC0600009205
-:10A460000000D70F0090010809006EF20000000004
-:10A4700000A001E016206E3A00000710330100F83A
-:10A4800082802FB4000007109FF0018082DB87BC20
-:10A49000000007109FF8018022216EBC0000000020
-:10A4A00000E801E00600EE320000000000F001E0EC
-:10A4B00006C08732000007100000008002000090F4
-:10A4C0000000FFFF00000080020000900000C50DAA
-:10A4D0000421013069246EBC0000BF0D1F4002241E
-:10A4E000094068B20000BB0D80000080E24192B6D6
-:10A4F0000800BB0D1201006892A4FEB800003610DF
-:10A5000000000080020000900000000000A801E0B0
-:10A5100066246E3A0000C20D382001E0060093B2B6
-:10A520000000C30D002801E00600009200000000BA
-:10A53000003001E00600003200000000005001E899
-:10A5400006000032000000000001008002000070E0
-:10A550000000CA0D38510100A99B91BA0000C80D36
-:10A5600004410208B9FF68B00000C60D0040028037
-:10A57000024068920000D50D9F3101E066246EBC58
-:10A580000000D50D003001E0060000920000D30D60
-:10A590000428010409006EB20000D10D9F010000E3
-:10A5A000192490BC0000000000A801E066246E3A67
-:10A5B00000000000002801E00624003C000000002C
-:10A5C000005001E806000032000036109F2001E034
-:10A5D000060093B20000000000010080020000703D
-:10A5E00000000000002801E0060000320000DB0D42
-:10A5F00004000080020090BC0000D50D0441020858
-:10A60000B9FF68B00000D30D00400280024068929C
-:10A610000000D90D02000080222490BC0000DB0D58
-:10A6200080400280F2C168B6000000000040028C49
-:10A63000B6C168350000DB0D000000F822812F94C0
-:10A640000800361012400268129AFEB80000D30DBE
-:10A6500004010000292490BC0000000000A801E0D3
-:10A6600066246E3A00000000005001E806009032B7
-:10A67000000036109F2001E0060093B200000000A9
-:10A6800000010080020000700000FFFF0000008059
-:10A69000020000901800E20D1F41027888CD68B6D4
-:10A6A000000000000000008812002C3A0000E40DB9
-:10A6B00080010080628087B60000E00D00400280CB
-:10A6C000024068920300361004400200381AFFB8B6
-:10A6D000000036101F400204B8FF68B00000000000
-:10A6E00000390200B81B807A0000FFFF00000080E4
-:10A6F000020000900000EF0D80010080A2802FB6C4
-:10A700000000EC0D1201000009C021B21800360053
-:10A71000000000F8730A03F900000000000000D8F0
-:10A72000024084321D00EF0D0401008002A417B81E
-:10A730000000E90D9F010080180088BC0000361061
-:10A740000000008002000090000000000060006C2B
-:10A7500008006E3200000000CA68004C08006E322B
-:10A76000000036100470001808006EB200000000EF
-:10A7700004000080A2A0817C0000F60D8001008012
-:10A78000E2802FB60000F60D1B000080020000B032
-:10A79000000000000600008062E0837C00000000F2
-:10A7A000CA0100F802802F3500A00000120100400D
-:10A7B000A28D39720000F70D0000008002000090A9
-:10A7C0000000FFFF00000080020000900000000079
-:10A7D000000801E406C02D32EEFF0000001001E089
-:10A7E000868D2F31000000000000001CB3E43932D8
-:10A7F0000000000E04000078D90130B6000000000F
-:10A8000000000078B905303018000000000000F8A2
-:10A81000E3A503390000000000000034330B2F32A1
-:10A820000000000004000078D9013076000000002C
-:10A8300000000078B905303018000000000100F871
-:10A84000E3A503790000FFFF0000008002000090F4
-:10A8500000000000000000CC020000320000080EE2
-:10A860002000012C09C06EB20000090E001686CC33
-:10A8700006C0929200000000001486CC06C09232FE
-:10A880000000000012010040628E92520000090E8A
-:10A8900000000080020000900000FFFF0000008028
-:10A8A0000200009000000E0E04000078D90130B6BE
-:10A8B0000E0E3600000000C00200369200000000BC
-:10A8C000000000140300383200000000000000E027
-:10A8D0000200303200004E0E04000024D80130B6D1
-:10A8E000120E000000000088824D823A00003610EF
-:10A8F0000000008002000090000036100000008080
-:10A90000020000900000361000000080020000905D
-:10A910000000361000000080020000900E0E36008D
-:10A92000000000C0020036920000380E00000080D7
-:10A930000200009000001A0E000000204805309030
-:10A940000000361000000080020000900000260E7B
-:10A95000921101BC08006EB200000000000801DC8A
-:10A9600002406E3200001E0E1F1101E026C18BB5A1
-:10A970000000260E1D000080020000B00000000054
-:10A98000000000D802000032800200000000000039
-:10A99000070036320000000000000078A9002D37C3
-:10A9A0002045000000080000878D973A0A0000004B
-:10A9B00000000078890D82370000000000100000C0
-:10A9C000A7BA973A000000000018000007C0EA325A
-:10A9D0000000250E1200004802C038B200002A0E06
-:10A9E000800E01BC08C06EB2000000000000000034
-:10A9F000190E823200E0320E12010048A20D90B210
-:10AA00000000280E000000800200009000000000FE
-:10AA1000000000D802400032B40000000000000036
-:10AA2000070036320000000000000078A9002D3732
-:10AA30000044000000080000878D973A00000000E5
-:10AA400000000078990082370000361002100000E4
-:10AA500087BF97BA00000000001800000740FE32D0
-:10AA60000000310E12000048F2C138B41800360060
-:10AA7000000000F8730A03F9000000000000000461
-:10AA8000896038320000000000000018F341903463
-:10AA90000000380E04000078D90130B60000000034
-:10AAA00000000000B905303018000000000000F878
-:10AAB00003A40339000000000000000019CE2C326E
-:10AAC0000060390E12000040A20D90B2000000009C
-:10AAD000000000D80200003260000000000000000A
-:10AAE0000700363200000000000000BCA8002D372F
-:10AAF000A04700000008000087CD8B3A0A00000044
-:10AB00000000007889CD2C3780020000000000781A
-:10AB1000898D973A0000000000100000A7BA973A0C
-:10AB2000000000000018000007C0EA320000420EDA
-:10AB300012000040F2C138B418003600000000F8DE
-:10AB4000730A03F900000000000801DC02406E32C5
-:10AB50000A00470E1F01007889CD2CB700000000C5
-:10AB60001D1001F802006E7280020000000000005B
-:10AB700007003632204500000008000087CD8B3AE0
-:10AB80000000000000100000A7BA973A0000000083
-:10AB90000018000007C0EA3200004B0E120000400F
-:10ABA000F2C138B418003600000000F8730A03F947
-:10ABB00000000000001101F802006E7200000000A9
-:10ABC000001001F802006E3200000000000901DCF4
-:10ABD00002406E720000FFFF000000800200009043
-:10ABE0000000000000000000090000320E0000001C
-:10ABF00000000004894D0D36000000000000000038
-:10AC000007800B32000000000008000007009032AF
-:10AC10000000000000100000070036320000560E51
-:10AC20001200004CF2C138B40000000000000080A7
-:10AC3000020000300000570E1200008002C021B256
-:10AC40000000000000000000E902903A0000530EEE
-:10AC500004010004194090BC0000000000010080C5
-:10AC6000020000500000FFFF000000800200009082
-:10AC70000000650E80010080A2802FB60000600EEB
-:10AC8000120100E802C021B218003600000000F8EE
-:10AC9000730A03F90000640E0400008002802DBCDA
-:10ACA000000036109F000080180088BC0000600E75
-:10ACB000120100E802C021B200005F0E0000008017
-:10ACC0000200009000000000CA0000D80240843258
-:10ACD000000000000040006C881C833A0000000067
-:10ACE0000048004C0800723200003610085000186E
-:10ACF000C82072BC00000000040000800240817C7B
-:10AD000000000000000000141840813C00003610D4
-:10AD100002000020880182BA00000000000000D874
-:10AD200002000032000000000000000007000632B0
-:10AD30000700000000080000774A09390000000001
-:10AD4000001000000700823200000000CA19000055
-:10AD5000074082320000700E12000040F2C138B489
-:10AD600000000000000100D8024084720000FFFFD4
-:10AD70000000008002000090000000004D00000074
-:10AD800067E0833E000000000008000007008032FA
-:10AD9000000000000010000007C086320000000024
-:10ADA0000018000007C084320000B70E040000281D
-:10ADB000D8A082BC0000000000000018D8A0813C90
-:10ADC0000000890E0400003CD8E083BC00007D0E2A
-:10ADD0000400008072802DBC00007B0E1200005029
-:10ADE00002C038B20000830E510000D812802D9AA4
-:10ADF00000007D0E12000050F2C138B41800360079
-:10AE0000000000F8730A03F90000820E04000080BD
-:10AE100072802DBC00007E0E670000F8A2802FB566
-:10AE200000003610120000E802C021B2000000004D
-:10AE3000510000D8020000320000870E2A010000F5
-:10AE4000D82080BA0000870E1201000009C021B28C
-:10AE500018003600000000F8730A03F90000000033
-:10AE6000000000D8024084320000F00D0060006C49
-:10AE700008006EF20000740E4D00000067E0839E33
-:10AE80000000890E12000050F2C138B418003600DC
-:10AE9000000000F8730A03F91D008E0E0400008004
-:10AEA00002A417B800008A0E670000F8A2802FB530
-:10AEB000000036101200000009C021B20800361050
-:10AEC00012400268129AFEB80000DC0E000000304A
-:10AED000030038F200009F0E1F00006CD8E086BA15
-:10AEE0000000E00D510000D8020000F20000940EB6
-:10AEF0000000003C0840809200009F0E000000808F
-:10AF0000020000900000980E80010080F2812FB6B0
-:10AF10000000980E80000080E2802FB60000980E9E
-:10AF200080010080328087B600000000000000F839
-:10AF3000E2802F340000730E04010080028081BC87
-:10AF400000009D0E80010080A2802FB600009D0EA3
-:10AF50001201000009C021B218003600000000F8FC
-:10AF6000730A03F900000000000000D80240843298
-:10AF70000000F00D0060006C08006EF20000740E1E
-:10AF80004D00000067E0839E0000A30E800100805A
-:10AF9000E2802FB60000BA0E80010080A2802FB69A
-:10AFA00018000000CA0000F8730A0339BA0E360010
-:10AFB000000000C00200369200000000000000A463
-:10AFC000A8608A3C0000A60E2FA8012099226EBA24
-:10AFD0000000A30D00000080020000F0000000004F
-:10AFE00000A801E00600923200000000005001E8D5
-:10AFF000060000320000AA0E232101E0060000B284
-:10B000003E00A90E1200002C82CD2EB20000361098
-:10B01000043000E0068082B20000B20E042100E09D
-:10B02000068081B20000B00E80010080A2802FB6A1
-:10B030000000B00E1201000009C021B21800360055
-:10B04000000000F8730A03F900000000000000D8B7
-:10B05000024084320000F00D0060006C08006EF2C7
-:10B0600000000000002000E0068081320000361061
-:10B07000041000E006C086B2000000002A1900E0BB
-:10B0800006C0847200000000000000F8A2802F3586
-:10B09000000000001201000009C0217218003600F3
-:10B0A000000000F8730A0399000000000000003C53
-:10B0B000D8E0833C0000B80E12000050F2C138B452
-:10B0C00000000000000000F8A2802F340000000003
-:10B0D0000000008812002C3A0000FFFF00000080F2
-:10B0E0000200009000000000000000000900003293
-:10B0F000000000000000007809000032000000009D
-:10B10000000000A802000032EE05C20E040100801B
-:10B11000820DF6BC0006000000000008090036326F
-:10B120000000C40E0000000409C0099200280000BD
-:10B130000000000809003632000000000000000492
-:10B14000098009321E000000000060C087CD003772
-:10B1500000000000000860C0078097320030000047
-:10B1600000000078898D2A3A000036101200005C39
-:10B17000528197B400000000000000002924903A9A
-:10B180000800000000000078890D903600000000E3
-:10B19000000000041940903C00000000000000A8DE
-:10B1A00052822A3A0008C40E02010080828D2ABC15
-:10B1B0000000D50E06000080024090BC0000361052
-:10B1C000120000A8020020B21E000000000000C013
-:10B1D00087CD003700000000000800C007809732CC
-:10B1E000000036101200005C52812AB400000000FA
-:10B1F000000000002924903A0800000000000078B8
-:10B20000890D90360000CE0E04010004194090BC58
-:10B210000500000000000078890D9036000036100F
-:10B2200012000068028097B20000000000000000D9
-:10B230002924903A00000000000000785900903660
-:10B240000000D60E95010080222490BA0000000074
-:10B2500000010080020000500000FFFF000000809D
-:10B26000020000900000000004010078D90130764F
-:10B27000000000000000002809C029320000000082
-:10B280000000009CB24528300000E80E860100084E
-:10B2900009802FB2000000000000002C094081321C
-:10B2A00000000000000000F8020000320000000072
-:10B2B000000000F40200003218000000000000F856
-:10B2C000738A0239000000000000009C0280923264
-:10B2D0000000E70E0407018002C06EBC0000ED0E06
-:10B2E000C30701ECB6E46E9A0000ED0E000601EC17
-:10B2F000B6E46E9A000000000000002C09058030C2
-:10B3000000000000000000F8020000320000000011
-:10B31000000000F40200003218000000000000F8F5
-:10B32000738A023900003F0F0000009C028092D215
-:10B330000000000000000030030038320000000070
-:10B3400004010078D90130760000DF0E0000009C77
-:10B35000B24528900000FFFF00000080020000902E
-:10B36000000000000000008802C0E8320200F20E77
-:10B37000B00000A0F20B00B9000000000000000CBB
-:10B38000ABE4B0320000F70E80010080F24BD0B683
-:10B3900000000000A00000280900003200000000AA
-:10B3A00000010080020000500000F90E040100803E
-:10B3B000123EF8BA0000040FA0000004FD4BD09428
-:10B3C0000000000F80010080D28192B60000000FC3
-:10B3D000800100802281FCB600000000A000000473
-:10B3E000FD4BD034000000000000008401C02F326B
-:10B3F0000000000000000080F101003400000000A7
-:10B400000000009401C02F320000040F00000090E3
-:10B41000F101009400000000A000008401C02F3260
-:10B420000000000000000080F101F834000000007E
-:10B43000000000900140F8320000000000010028E8
-:10B44000090000520000080F040100280934B0BAB6
-:10B450000000050FB0000080020000B000000000F6
-:10B46000A0000004FD4BD0350000000000010028C2
-:10B47000090000520000080FB00000A822C02FB73A
-:10B480000000060F040084C037ACB0B2000000001A
-:10B49000A000000C0B000032FFFF0000000000784D
-:10B4A000A94DB03000000F0F800000800240B0B600
-:10B4B000000000000000007869819735000000005E
-:10B4C000000084080B007C32000000000000000037
-:10B4D000E72501320042000000080000878D2A3A6B
-:10B4E00000000000001000000700B0320000000063
-:10B4F000001800000700D0320000000012010048D0
-:10B50000F2C138540000130F0000008002000090C8
-:10B510000000150FB00000A0020000B20000000003
-:10B520000000000CABE4B03200001A0F8001008074
-:10B530000240D0B600000000A00000280900003240
-:10B5400000000000000100800200005000001C0FFD
-:10B5500004010080123EF8BA00002D0FA000000484
-:10B560000D40D0940000260F80010080D28192B659
-:10B570000000260F800100802281FCB60000000040
-:10B58000A00000040D40D03400000000000000784E
-:10B5900009C02F3200000000000000FC0200003251
-:10B5A000000000000000008401C02F3200000000F5
-:10B5B00000000080F1010034000000000000009451
-:10B5C00001C02F320000000000000090F1010034A3
-:10B5D00000002D0F000000FC028097920000000088
-:10B5E000A000007809C02F3200000000000000FC1D
-:10B5F00002000032000000000000008401C02F3271
-:10B600000000000000000080F101F834000000009C
-:10B61000000000900140F83200000000000000FC33
-:10B62000028097320000000000010028090000524B
-:10B630000000310F040100280934B0BA00002E0FB9
-:10B64000B0000080020000B000000000A000000474
-:10B650000D40D03500000000000100280900005214
-:10B660000000310FB00000A8020000B200002F0F50
-:10B67000040084C037ACB0B200000000A000000C91
-:10B680000B000032FFFF000000000078A94DB03031
-:10B690000000380F800000800240B0B600000000BB
-:10B6A00000000078698197350000000000008408E0
-:10B6B0000B007C320000000000000000E725013292
-:10B6C0000042000000080000878D2A3A00000000B8
-:10B6D000001000000700B032000000000018000059
-:10B6E0000700D0320000000012010048F2C13854B7
-:10B6F00000003C0F00000080020000900000FFFFEF
-:10B7000000000080020000900000410F1C400280F9
-:10B7100006C092B244000000000100F8A28D2F5232
-:10B72000000036101200006802C592B00000000050
-:10B73000000100701F00F75A0000FFFF00000080AA
-:10B740000200009000000000D5080000078092323F
-:10B75000000000000030000007C02C3200400080D4
-:10B76000003800000700373200000000CA4101E045
-:10B77000068092320000480F1200004802C080B2DA
-:10B780000060000000010008088036720000FFFF22
-:10B79000000000800200009000000000003800005F
-:10B7A00007809232000000000030000007C02C32F9
-:10B7B00000000000CA3D000C07808332000000003A
-:10B7C0001201004802C0807200004E0F000000808D
-:10B7D000020000900000FFFF0000008002000090C7
-:10B7E000000000000457018002C06E7C00000000D1
-:10B7F000005701EC068092720000FFFF00000080FD
-:10B80000020000900000DC0E00000030030038F25F
-:10B810000000570F9D11020C09006EB20000580F76
-:10B8200000F0011C09006E920000000000B8011C2D
-:10B8300009006E3200005A0F2CCD011809806EB23B
-:10B84000000000000000000CC9C1903400005D0F32
-:10B850003B29020409806EB20000000000D601EC12
-:10B8600056C06E34000000000000000CB9C19034D6
-:10B8700000006C0F00A8010809006EF20000610FC3
-:10B880009D01008017E090BA0000000000300080A9
-:10B8900007C091320000640F003800800700EE926C
-:10B8A0000000640F0401008002C091BC0000000091
-:10B8B00000B801E00600EE3200000000007001E078
-:10B8C000060086320000660F3908008007C085B286
-:10B8D00000000000D9C901E8068091320000000094
-:10B8E000C8110080074090320000690F3B210080A2
-:10B8F000070086B200000000DB0000601800863AF6
-:10B9000000000000587801E01620863A0000000090
-:10B9100000290080070085720000FFFF0000008002
-:10B92000020000900000700F020C0280A29B90BCED
-:10B93000000000000000027829006E360000700F41
-:10B9400002000080E2A590BC00000000000000089A
-:10B95000090000320000720F9F89017849216EBCF6
-:10B960000000000000000078090000320000000024
-:10B9700000000008E9A5903F0000780F04200208AD
-:10B98000899B90BE00000000000A0258B89B9036C8
-:10B99000000000000000007849A1903A000000007B
-:10B9A0009F880180829B977C00000000008901E055
-:10B9B0000680977200000000000B0258B89B90763A
-:10B9C0000000FFFF000000800200009000007F0FD9
-:10B9D00080010080A2802FB600007E0F1201007847
-:10B9E00009C021B218003600000000F8730A03F9FC
-:10B9F00000007F0FCA0000D80240849200000000BF
-:10BA0000000000F8A2802F35000000000040006C0C
-:10BA1000881C833A000000000048004C0800723285
-:10BA20000000361008500018C82072BC000000004A
-:10BA30000600008062A0827C000036100200002018
-:10BA4000880182BA00000000000000D80200003225
-:10BA500000000000000000000700063207000000A0
-:10BA600000080000774A09390000000000100000BB
-:10BA70000700823200000000CA190000074082322D
-:10BA80000000890F12000040F2C138B4000000002D
-:10BA9000000100D8024084720000FFFF0000008017
-:10BAA000020000900000930F80010080F2C185B673
-:10BAB0000000900F1F400284E60100B40000930FC5
-:10BAC0001D0100F822812FB40000930F000000F840
-:10BAD00062812F950000920F1D010080020000B0CE
-:10BAE00000000000000000F862812F350000000017
-:10BAF00000400280024068320000361012000068E8
-:10BB000002C585B0000000001D000080020000702A
-:10BB10000100000004010080A28D2F702A00960F02
-:10BB20001200002C82CD2EB200000000000100F8AF
-:10BB300002812F740000FFFF0000008002000090CF
-:10BB400080A8000004000080828D2F7000009F0FED
-:10BB500080010080D2802FB600009F0F04B00080CB
-:10BB600002006EBC00000000000000F872812F345B
-:10BB70003D00A20F1201002C82CD2EB200009D0FBD
-:10BB800000000080020000900000A20F80010080F1
-:10BB9000F2802FB63C00A50F1201002C82CD2EB2F0
-:10BBA0000000A00F00000080020000900000A50F20
-:10BBB00080010080B2802FB63500A30F1200002C48
-:10BBC00082CD2EB200000000000000F842812F3428
-:10BBD0008000000004000080828D2F7002000000B1
-:10BBE00004010080A28D2F703B00A70F1200002CD3
-:10BBF00082CD2EB200000000000100F812812F74E7
-:10BC00000000FFFF0000008002000090080000001C
-:10BC1000001801E876208139EEFF0000000100F8ED
-:10BC2000828D2F710000FFFF000000800200009055
-:10BC30000000B10F0000013808C06EF200000000E3
-:10BC40001201004802C080720000AE0F00000080A8
-:10BC5000020000900000FFFF000000800200009042
-:10BC60000000B30F0438017809006EB20000000034
-:10BC7000003801E00600003200000000CA11000098
-:10BC8000078082320000B60F2E190000078097B29D
-:10BC90000000000000000028E98192340000BB0F82
-:10BCA0002731000007C02CB200000000D5080000BA
-:10BCB0000700873200000000C7000028E9809234A6
-:10BCC00000000000004001E0060087320000000094
-:10BCD00000000008D8818034100000000039000006
-:10BCE000E7A092790000FFFF0000008002000090B2
-:10BCF0000000BD0F1200004412E438B218003600F4
-:10BD0000000000F8730A03F90000C20F040100806C
-:10BD100002802DBC0000BE0F670000F8A2802FB586
-:10BD200000003610120000E802C021B2000000003E
-:10BD3000000100D8024000720000FFFF00000080F8
-:10BD4000020000900000C70F04300080829B81BC7D
-:10BD500000000000CA0100F802802F3500A0C60FC5
-:10BD600012000040A28D39B200C0CB0F0438007819
-:10BD7000898D6EB01000CB0F9F0100F8E2A52FB99E
-:10BD800000000000005801EC06C0EE320000000088
-:10BD900000000080020000300000000004280018AD
-:10BDA00009006E720000BA0D00000080020000F071
-:10BDB0000000A30D00A8012009006E920000FFFF03
-:10BDC00000000080020000900000D40F04B000804A
-:10BDD000829B81BC0000000000B800E886806E34C1
-:10BDE00000000000CA0100F842802F3508A00000C2
-:10BDF00012010040A2CD39720000D20F0000008075
-:10BE0000020000900000000000B800E886806E3458
-:10BE10000000000000010080020000700000FFFF31
-:10BE200000000080020000900000DA0F33CD01BC5A
-:10BE300008806EB200001410000000282922EEDCF9
-:10BE40000000DF0F00000080020000900000DF0F04
-:10BE500004B8012809006EB20000DF0F9F71018055
-:10BE6000C2216EBC000036109F000028A924EEBC41
-:10BE70000000141000000028198092DF000000006C
-:10BE800000000080020000300000F20F02810180FB
-:10BE9000829B90BCEE05EA0F060C0280828D6EBC80
-:10BEA00000904C0000000084020037320000E40FD4
-:10BEB000B8010080020000B00000E20F0000008026
-:10BEC0000200009000000000000000C403809032D7
-:10BED0000000000000B001E096216E3C0000000070
-:10BEE000619801E0060087320000000000D401ECF8
-:10BEF0000600003200000000A800007849403C37EE
-:10BF00000000F70F00000008E9A5909A6089200062
-:10BF100000000084020037320000ED0FB8010080FD
-:10BF2000020000B00000EB0F000000800200009053
-:10BF300000000000000000C40380903200000000F8
-:10BF400000B001E096216E3C00000000619801E025
-:10BF5000060087320000000000D401EC0600003229
-:10BF60000000F70FA8000008198F909A0000000049
-:10BF70000000007899A1893E000000000000000840
-:10BF8000E9A5903A0000000000B001E096216E3C67
-:10BF900000000000619801E0060087320000000008
-:10BFA00000D401EC060000320000FA0F0600008009
-:10BFB00072A290BC00C0FF3F008001E00600373253
-:10BFC000000000000000000809C089320000FF0FD7
-:10BFD00004790180821B87BC0000FD0F04B0008043
-:10BFE00002006EBC00000110D99001E00680909222
-:10BFF000000004108000008052812FB60000041061
-:10C00000D54101E006008792000001103C9001E05C
-:10C01000068090B20000000000C801E806C08B3224
-:10C02000000000009501008002802F7200000510C2
-:10C030009F410180821B87BC00000000000100803E
-:10C040000200007000000000D99001E006809032EC
-:10C0500000000000000100F872802F740000FFFF54
-:10C06000000000800200009000000D109FD80180A9
-:10C0700022216EBC000000000B0100800200007055
-:10C0800000000D109FE00180C2216EBC0000000086
-:10C090000B0100800200007000000D109FB00180B5
-:10C0A000D2216EBC00000000000100800200007080
-:10C0B00000000F1006680180825B87BC0000000052
-:10C0C000006801E0064087320000111037B001E03F
-:10C0D000064087B200000000000000F8D2802F3434
-:10C0E0000000000000D801E006808432000000005B
-:10C0F00000E101E0060087720000FFFF0000008001
-:10C10000020000900000201004C1018402006EB201
-:10C110000500000000C001E8868D92370300000092
-:10C1200000C401E8868D9237000000000000008006
-:10C13000020000300300000000C0012C898D6E3623
-:10C140000000000000C4012CA9DB923A00000000AE
-:10C150000000002C29C09236000000000000002CD6
-:10C1600019FB923F00000000000000282980923A4D
-:10C17000000000000000002CA9E4923F0000000035
-:10C180006FCC01E826FB923E0000000000B901E000
-:10C19000060000520000000000000094028092326D
-:10C1A0000000000000C001E006402832100000003E
-:10C1B0006FCC01E886CD2A360000000000B901E00E
-:10C1C000060000520000FFFF000000800200009007
-:10C1D00000000000009001BC08006E32000000006A
-:10C1E00000B001BC88DB8B3E00000000009801BC61
-:10C1F00088DB8B3A000030109F0000BC88E18BBCCC
-:10C2000000003010040C0240A8DB8BBE00000000D0
-:10C2100000B00004881B843E00002D1004B1008093
-:10C22000825B80BC00000000000100F8C2802F7417
-:10C2300000000000040C0280A25B807C0000301033
-:10C240000468017819006EB600000000020000804A
-:10C25000E265807C000000000000008812002C3A9B
-:10C260000000FFFF000000800200009008000000B6
-:10C27000001C01E876208139EEFF0000000100F883
-:10C28000828D2F710000FFFF0000008002000090EF
-:10C2900000003610000000B40F40FB9400000000C6
-:10C2A000000000880F402B320000000000000090CA
-:10C2B0000F00283200000000000000940F00293217
-:10C2C00010000000000000B85F461839FF000000B1
-:10C2D0000000009C0F003632000000000000009CAF
-:10C2E0005FCAF935000000000000004403C0F932C5
-:10C2F00000000000000000E40300003241000010D4
-:10C30000000000E00300373200000000000000E4FD
-:10C310000300003240000010000000E0030037324C
-:10C3200000004510670000980F802AB2000000004E
-:10C33000000000A8020000320000431012C186E095
-:10C3400007C021B20000000000B886C006802A3273
-:10C350004C420000000000A802003632471058117D
-:10C36000000000B00F003692000000000000009CAA
-:10C370000200003200014411000000AC0F0036D270
-:10C3800000000000000000AC0F802A3200200000F6
-:10C39000000000A802003632000000000000009CEF
-:10C3A0000F007E3200000000000000A00F007E326F
-:10C3B00000000000000000A40F007E32000000001A
-:10C3C000000000A80F007E3200000000000000A85E
-:10C3D00002C0FA3200000000000000E007C0F9329D
-:10C3E00000000000000000E00700FA32000000003A
-:10C3F000000000E00740FA3200005B10000000E09F
-:10C400000780FAD200000000000000E00780FB3245
-:10C4100001008210040100B48F4DFBB00200000047
-:10C42000000000A002000039408000000000000C65
-:10C43000ABCDB032100000000000000C5BCAB03978
-:10C44000000000000000000C2BFEB0320000811143
-:10C45000000000800200009000000000000000F8D2
-:10C460000300013200000000000100E007803F529D
-:10C4700018000000000000F8738A02390000000074
-:10C4800000000044530A1635000000000000009C24
-:10C490000F80963200000000000000A00FC096320E
-:10C4A00000000000000000A40F009732A26003000B
-:10C4B0000000005803003732681000000000005CE4
-:10C4C000030036320000000000000050830D0034ED
-:10C4D0000000000000000048830D00340000000050
-:10C4E00000000044530A00340000360000000080C1
-:10C4F00002000090000000000000006809C0F9324E
-:10C50000000000000000006C0900FA32000000008A
-:10C51000000000700940FA3200007A10000000802C
-:10C520000200009002000000000000A0F20B0039A1
-:10C5300000006F10800100801240B0B600000000C3
-:10C54000000000043B40B033000000000000000485
-:10C55000FD4BD035000073100000000C0B009792CB
-:10C5600002000000000000A0F20B00390000731070
-:10C57000000000046B019794000073101200006823
-:10C58000094020B2000074101200006C094020B273
-:10C590000D000000000000FCA2E516380000791034
-:10C5A0009F000080028096B2000000000000007032
-:10C5B00009C0963200007A100000006C09C0FD929C
-:10C5C0000000791012000070094020B20000000045
-:10C5D0000000009C0200003200000000000000D8B3
-:10C5E0000200003202007310040100BCAF2517B82E
-:10C5F00006007110040000BCAF6516B800006C1096
-:10C600000400008022C0FBBC00008A1004000080EF
-:10C6100012C1FBBC200073100401008082CDFBBC62
-:10C6200002000000000000A0F20B003900008B1097
-:10C6300000000080020000D084100000000000888C
-:10C6400082CDF93A00007A110000008002000090CB
-:10C650000000B31000000080020000900000B41041
-:10C6600000000080020000900000B8100000008070
-:10C67000020000900000C010000000800200009046
-:10C6800000001911000000800200009000007310EB
-:10C69000000000DC0F009792000000000000000086
-:10C6A0000700033240420000000000A802003632BA
-:10C6B000000000000008000007802A32000000008F
-:10C6C0000010000007009732000000000018000072
-:10C6D00007C096320880901012000040028036B2E7
-:10C6E00000000000000000800200003000009210F6
-:10C6F0001200009C0FC021B21D00951004000080A4
-:10C7000072BE17B800009210000000F81E80EF9A69
-:10C71000130000000000009C7FBE17380000981036
-:10C720000400008012C0F9BC00009210000000F864
-:10C730001E80EF9A000000000000009C0F007E3277
-:10C7400000000000000000A00F007E32000000008A
-:10C75000000000A40F007E32000000000001000075
-:10C760000700FA52000000000000009C02000032A6
-:10C770004C420000000000A8020036320000000019
-:10C780000008000007802A3200006E1100000080BF
-:10C79000020000D00000721100000080020000D0F2
-:10C7A000000000000000000CCBC1B034000000000D
-:10C7B0000000009C0200003200000000000000D8D1
-:10C7C000020000320000F10E0000002809C0B0D2C3
-:10C7D0000000A21004000080028092B20000A610A7
-:10C7E0001200009C0FC021B21D00A910040000809F
-:10C7F00072BE17B80000A610000000F81E80EF9A65
-:10C80000130000000000009C7FBE17380000AC1031
-:10C810000400008012C0F9BC0000A610000000F85F
-:10C820001E80EF9A0200AE10040100B48F4DFBB0E1
-:10C83000000073100000008002000090080000005B
-:10C84000000000F89340013900000000000000B42F
-:10C850001F40FB35FE000000000000480300363298
-:10C860000000000000000044030000340000A2109B
-:10C870000000000C8BC1B09400007E110008000085
-:10C880000740FA9200006E11000800000740FAD23B
-:10C890000880B51012000050028036B200007311FB
-:10C8A00000000080020000D0000080110000008025
-:10C8B00002000090000800000000009C0F003632CB
-:10C8C00000440000000000A8020036320000000012
-:10C8D000000000A00200003200000000000000E0A4
-:10C8E0000700B03200000000000000A012002A3A49
-:10C8F0000000BB100401009C1FC0F9BC00440000F4
-:10C90000000000A80200363202007D11000000A0E5
-:10C91000F20B00990000C810040100800240FAB236
-:10C9200000440000000000A8020036320000CA10D7
-:10C9300000000080020000D00000D710000000843A
-:10C94000020000D200000000000000E007C03C32FE
-:10C950000000C4108E010080024028B20044000094
-:10C96000000000A40F0036320000B3100000008069
-:10C970000200009000440000000000A48F4DFA3A2D
-:10C980000000B310000000800200009000000000D2
-:10C990000000009C0F00003210000001000000ACFD
-:10C9A0000F0037320000DC1000000080020000D0D1
-:10C9B0000800CC100401008082CDF9BC000000000A
-:10C9C0000000009C0F0000320E000001000000ACCF
-:10C9D0000F0037320000DC1000000080020000D0A1
-:10C9E0000B00D0100401008082CDF9BC20000000B3
-:10C9F0000000009C0F0036320F000001000000AC68
-:10CA00000F0037320000DC1000000080020000D070
-:10CA10002700D4100401008082CDF9BC0000000082
-:10CA20000001008002000050000000000000009C97
-:10CA30000F0000320F000001000000AC0F00373281
-:10CA40000000DC1000000080020000D02000D9109F
-:10CA50000401008082CDF9BC0000000000010080CC
-:10CA60000200005000000000000000E403C0F932A2
-:10CA70000D000001000000E003003732000000005C
-:10CA8000000000E003C0FA3200000000000000E0F7
-:10CA900007403E32000000000001009C1FC0F95A10
-:10CAA00000000000000000E003C0F93200000000B8
-:10CAB000000000E007403E32000000000000009C43
-:10CAC0001FC0F93AFF000000000100AC8FCDF95003
-:10CAD000000000000000009C0FC02F32000000008A
-:10CAE000000000FC0200003200000000000000E036
-:10CAF00007803E3200000000000000FC12C02F3A08
-:10CB00000F00E7100401008082CD2FBC0000000060
-:10CB1000000000E007803E3200000000000100FC41
-:10CB200002C0F95200000000000000E007003A32A5
-:10CB300000000000000000E007403A320000000062
-:10CB4000000000E007803A3200000000000000E032
-:10CB500007C03A32000000000000009C0FC02F32D6
-:10CB600000000000000000FC020000320000000095
-:10CB7000000000E007003D3200000000000000E07F
-:10CB800007403D320000F210830100FC12C02FBAB2
-:10CB900000000000000100FC02C0F952000000008B
-:10CBA0000000009C0F0000320C0000000000000894
-:10CBB000733E003900000000000000E00700303242
-:10CBC000000000000000009C1FC0F93A7000F71040
-:10CBD0000401008082CDF9BC000000000000000CC0
-:10CBE0000300003200000000000000E007003032C7
-:10CBF00000000000000000100300003200000000F0
-:10CC0000000000E007003032000000000000009C3F
-:10CC10000F00003200000000000000A00FC0293209
-:10CC2000000000000000009C02C0F932000000007B
-:10CC3000000000A40FC02C32000000000000009C87
-:10CC40000200FA32180000000000002C737EFA394E
-:10CC500000000000000000E007003032000000117A
-:10CC60008501009C1FC0F9BA00000000000100808F
-:10CC700002000050010000010000009C0F0037324C
-:10CC80000000E11000000080020000D00E000F1133
-:10CC90000401008082CDFABC00000000000000E02A
-:10CCA0000700003200000000000000E00700003232
-:10CCB00000000000000000E0070000320000091141
-:10CCC0000000009C3FC0F99A1C000911040100807B
-:10CCD00082CDFABC0200E1100000009C8FCDF9DA91
-:10CCE000000000000001008002000050010000026E
-:10CCF0000000009C0F0037320000E11000000080AF
-:10CD0000020000D00E0017110401008082CDFABC91
-:10CD100000000000000000E00700003200001311D6
-:10CD20000000009C1FC0F99A260013110401008026
-:10CD300082CDFABC0000000000010080020000501B
-:10CD400000000000000000A80F402932004400004D
-:10CD5000000000A802003632000008110000008028
-:10CD6000020000D00000121100000080020000D07C
-:10CD70000000E51000000080020000D0000000006C
-:10CD8000000000E00780183200000000000000E012
-:10CD900007401A3200000000000000E007001A32CD
-:10CDA00000000000000000E007801A3200000000D0
-:10CDB000000000E007C01A3200000000000000A0E0
-:10CDC0000F000032A2600300000000580300373259
-:10CDD0002B1100000000005C030036320000000050
-:10CDE0000000009C0F802A3200002B1104000080FC
-:10CDF000024029B20000000000000050833E0034D1
-:10CE00000000000000000048833E003400000000E5
-:10CE100000000044530A003400002C110000008878
-:10CE20000F402B9200000000000000900F002832FD
-:10CE300000000000000000940F00293200000000F4
-:10CE4000000000980F802A3200000000000000A8B7
-:10CE500002C0F93231115811000000B00F003692B3
-:10CE60000700341104000080824D29BC000000003E
-:10CE7000000000A01F00FA3A000028110000009CEA
-:10CE80000F802A92C0010000000000AC0F00363273
-:10CE9000010000000000009C020036320000441136
-:10CEA00000000080020000D01F003A110400008042
-:10CEB00082CD29BCC0000000000000AC8FCDFA3A42
-:10CEC000000036110000009C12C0299A0000F610E4
-:10CED00000000080020000D00000EC100000008084
-:10CEE000020000D00000421104000080528AFABC07
-:10CEF000A260030000000058030037324211000016
-:10CF00000000005C0300363200000000000000500A
-:10CF1000A33E00340000000000000048A33E00349F
-:10CF20000000000000000044530A003400440000E8
-:10CF3000000000A40F0036320000B3100000008093
-:10CF40000200009000000000000000C402C0FA329D
-:10CF5000030000000000009C0F00363200000000BB
-:10CF6000000000BC0F402F3200004B110400009C59
-:10CF70001FC0F9BC00004A110400008002402FB21B
-:10CF800000004711000000E007002C92000047114C
-:10CF9000000000E00700369200000000000000E002
-:10CFA00007402C3200000000000000E007802C3217
-:10CFB00000000000000000E007C02C32000000006C
-:10CFC000000000E007002D3200000000000000E03B
-:10CFD00007402D3200000000000000E007802D32E5
-:10CFE00000000000000000E007C02D32000000003B
-:10CFF000000000E007C0FB3200000000000000E07D
-:10D0000007802F3200000000000000E007C02F3230
-:10D0100018000000000000F8730A02390000000048
-:10D02000000100E007803F52FF00000000000044C4
-:10D030000300363200000000000000E00700F93273
-:10D0400000000000000000E007402832000000005F
-:10D05000000000E00780F832030000000000009CA0
-:10D060000F00363200000000000000BC0FC02B3261
-:10D07000000061110400009C1FC0F9BC0000601199
-:10D080000400008002C02BB200005D11000000E02F
-:10D0900007C0289200005D11000000E007003692F2
-:10D0A00000000000000000E00740F932000000002E
-:10D0B000000000E00740293200000000000000E00E
-:10D0C0000780293200000000000000E007C029327C
-:10D0D00000000000000000E007002A32000000000D
-:10D0E000000000E007402A3200000000000000E0DD
-:10D0F0000780F93200000000000000E007C02A327B
-:10D1000000000000000000E007C02F320000000017
-:10D11000000000E007402B3200000000000000E0AB
-:10D1200007802B3200000000000000E007C0FB3247
-:10D1300000000000000000880200FB320000000038
-:10D140000000009C0200003200000000000000D837
-:10D1500002000032000000000010000007009732BB
-:10D16000000000000019000007C0965208807211EC
-:10D1700012000048028036B200000000000000806B
-:10D1800002000030000074111200009C0FC021B298
-:10D190001D0077110400008072BE17B800007411E2
-:10D1A000000000F81E80EF9A130000000000009CB1
-:10D1B0007FBE1738000000000400008012C0F95C38
-:10D1C00000007411000000F81E80EF9A00000000BB
-:10D1D000000000B40F40FB35000000000000009C80
-:10D1E000020000324C420000000000A8020036326B
-:10D1F000000000000008000007802A3200006E11C5
-:10D2000000000080020000D00000721100000080C9
-:10D21000020000D0000000000000000CCBC1B034C0
-:10D22000000000000000009C02000032000000002E
-:10D23000000000D80200003200008B11000000281E
-:10D2400009C0B0D20000811104000080028092B2B7
-:10D25000000085111200009C0FC021B21D00881132
-:10D260000400008072BE17B800008511000000F8AD
-:10D270001E80EF9A130000000000009C7FBE17384C
-:10D28000000073100400008012C0F9BC000085117A
-:10D29000000000F81E80EF9A00000000000000FC73
-:10D2A0000200003202000000000000A0F20B003972
-:10D2B00000008F11040100280934B0BA00000000FA
-:10D2C000000100280900005200000000000000A832
-:10D2D00022C02F3700000000000084C037ACB032FD
-:10D2E000000000000000000C0B000032FFFF0000F7
-:10D2F000000000C0AF4DB0300000951180000080EC
-:10D300000240B0B600000000000000C06F01FC3514
-:10D310000000000000000000073F01320042000052
-:10D3200000080000878D2A3A00000000001000006D
-:10D330000700B03200000000001800000700D032E3
-:10D3400000000000000000C03FC1383400000000B1
-:10D3500012010048F201FC5400009A110000008004
-:10D36000020000900000FFFF00000080020000901B
-:0CD3700000003600000000800200009069
-:00000001FF
--- /dev/null
+:10000000FF000E100F00FF000E110F00FF000E1278
+:100010000F00FF000E130F00FF000E140F00FF0073
+:100020000E150F00FF000E160F00FF000E170F0039
+:10003000FF000E180F00FF000E190F00FF000E1A30
+:100040000F00FF000E1B0F00FF000E1C0F00FF0033
+:100050000E1D0F00FF000E1E0F00FF000E1F0F00F1
+:10006000FF000E200F00FF000E210F00FF000E22E8
+:100070000F00FF000E230F00FF000E240F00FF00F3
+:100080000E250F00FF000E260F00FF000E270F00A9
+:10009000FF000E280F00FF000E290F00FF000E2AA0
+:1000A0000F00FF000E2B0F00FF000E2C0F00FF00B3
+:1000B0000E2D0F00FF000E2E0F00FF000E2F0F0061
+:1000C000FF000E300F00FF000E310F00FF000E3258
+:1000D0000F00FF000E330F00FF000E340F00FF0073
+:1000E0000E350F00FF000E360F00FF000E370F0019
+:1000F000FF000E380F00FF000E390F00FF000E3A10
+:100100000F00FF000E3B0F00FF000E3C0F00FF0032
+:100110000E3D0F00FF000E3E0F00FF000E3F0F00D0
+:10012000FF000E400F00FF000E410F00FF000E42C7
+:100130000F00FF000E430F00FF000E440F00FF00F2
+:100140000E450F00FF000E460F00FF000E470F0088
+:10015000FF000E480F00FF000E490F00FF000E4A7F
+:100160000F00FF000E4B0F00FF000E4C0F00FF00B2
+:100170000E4D0F00FF000E4E0F00FF000E4F0F0040
+:10018000FF000E500F00FF000E510F00FF000E5237
+:100190000F00FF000E530F00FF000E540F00FF0072
+:1001A0000E550F00FF000E560F00FF000E570F00F8
+:1001B000FF000E580F00FF000E590F00FF000E5AEF
+:1001C0000F00FF000E5B0F00FF000E5C0F00FF0032
+:1001D0000E5D0F00FF000E5E0F00FF000E5F0F00B0
+:1001E000FF000E600F00FF000E610F00FF000E62A7
+:1001F0000F00FF000E630F00FF000E640F00FF00F2
+:100200000E650F00FF000E660F00FF000E670F0067
+:10021000FF000E680F00FF000E690F00FF000E6A5E
+:100220000F00FF000E6B0F00FF000E6C0F00FF00B1
+:100230000E6D0F00FF000E6E0F00FF000E6F0F001F
+:10024000FF000E700F00FF000E710F00FF000E7216
+:100250000F00FF000E730F00FF000E740F00FF0071
+:100260000E750F00FF000E760F00FF000E770F00D7
+:10027000FF000E780F00FF000E790F00FF000E7ACE
+:100280000F00FF000E7B0F00FF000E7C0F00FF0031
+:100290000E7D0F00FF000E7E0F00FF000E7F0F008F
+:1002A000FF000E800F00FF000E810F00FF000E8286
+:1002B0000F00FF000E830F00FF000E840F00FF00F1
+:1002C0000E850F00FF000E860F00FF000E870F0047
+:1002D000FF000E880F00FF000E890F00FF000E8A3E
+:1002E0000F00FF000E8B0F00FF000E8C0F00FF00B1
+:1002F0000E8D0F00FF000E8E0F00FF000E8F0F00FF
+:10030000FF000E900F00FF000E910F00FF000E92F5
+:100310000F00FF000E930F00FF000E940F00FF0070
+:100320000E950F00FF000E960F00FF000E970F00B6
+:10033000FF000E980F00FF000E990F00FF000E9AAD
+:100340000F00FF000E9B0F00FF000E9C0F00FF0030
+:100350000E9D0F00FF000E9E0F00FF000E9F0F006E
+:10036000FF000EA00F00FF000EA10F00FF000EA265
+:100370000F00FF000EA30F00FF000EA40F00FF00F0
+:100380000EA50F00FF000EA60F00FF000EA70F0026
+:10039000FF000EA80F00FF000EA90F00FF000EAA1D
+:1003A0000F00FF000EAB0F00FF000EAC0F00FF00B0
+:1003B0000EAD0F00FF000EAE0F00FF000EAF0F00DE
+:1003C000FF000EB00F00FF000EB10F00FF000EB2D5
+:1003D0000F00FF000EB30F00FF000EB40F00FF0070
+:1003E0000EB50F00FF000EB60F00FF000EB70F0096
+:1003F000FF000EB80F00FF000EB90F00FF000EBA8D
+:100400000F00FF000EBB0F00FF000EBC0F00FF002F
+:100410000EBD0F00FF000EBE0F00FF000EBF0F004D
+:10042000FF000EC00F00FF000EC10F00FF000EC244
+:100430000F00FF000EC30F00FF000EC40F00FF00EF
+:100440000EC50F00FF000EC60F00FF000EC70F0005
+:10045000FF000EC80F00FF000EC90F00FF000ECAFC
+:100460000F00FF000ECB0F00FF000ECC0F00FF00AF
+:100470000ECD0F00FF000ECE0F00FF000ECF0F00BD
+:10048000FF000ED00F00FF000ED10F00FF000ED2B4
+:100490000F00FF000ED30F00FF000ED40F00FF006F
+:1004A0000ED50F00FF000ED60F00FF000ED70F0075
+:1004B000FF000ED80F00FF000ED90F00FF000EDA6C
+:1004C0000F00FF000EDB0F00FF000EDC0F00FF002F
+:1004D0000EDD0F00FF000EDE0F00FF000EDF0F002D
+:1004E000FF000EE00F00FF000EE10F00FF000EE224
+:1004F0000F00FF000EE30F00FF000EE40F00FF00EF
+:100500000EE50F00FF000EE60F00FF000EE70F00E4
+:10051000FF000EE80F00FF000EE90F00FF000EEADB
+:100520000F00FF000EEB0F00FF000EEC0F00FF00AE
+:100530000EED0F00FF000EEE0F00FF000EEF0F009C
+:10054000FF000EF00F00FF000EF10F00FF000EF293
+:100550000F00FF000EF30F00FF000EF40F00FF006E
+:100560000EF50F00FF000EF60F00FF000EF70F0054
+:10057000FF000EF80F00FF000EF90F00FF000EFA4B
+:100580000F00FF000EFB0F00FF000EFC0F00FF002E
+:100590000EFD0F00FF000EFE0F00FF000EFF0F000C
+:1005A000FF000E100F00FF000E110F00FF000E12D3
+:1005B0000F00FF000E130F00FF000E140F00FF00CE
+:1005C0000E150F00FF000E160F00FF000E170F0094
+:1005D000FF000E180F00FF000E190F00FF000E1A8B
+:1005E0000F00FF000E1B0F00FF000E1C0F00FF008E
+:1005F0000E1D0F00FF000E1E0F00FF000E1F0F004C
+:10060000FF000E200F00FF000E210F00FF000E2242
+:100610000F00FF000E230F00FF000E240F00FF004D
+:100620000E250F00FF000E260F00FF000E270F0003
+:10063000FF000E280F00FF000E290F00FF000E2AFA
+:100640000F00FF000E2B0F00FF000E2C0F00FF000D
+:100650000E2D0F00FF000E2E0F00FF000E2F0F00BB
+:10066000FF000E300F00FF000E310F00FF000E32B2
+:100670000F00FF000E330F00FF000E340F00FF00CD
+:100680000E350F00FF000E360F00FF000E370F0073
+:10069000FF000E380F00FF000E390F00FF000E3A6A
+:1006A0000F00FF000E3B0F00FF000E3C0F00FF008D
+:1006B0000E3D0F00FF000E3E0F00FF000E3F0F002B
+:1006C000FF000E400F00FF000E410F00FF000E4222
+:1006D0000F00FF000E430F00FF000E440F00FF004D
+:1006E0000E450F00FF000E460F00FF000E470F00E3
+:1006F000FF000E480F00FF000E490F00FF000E4ADA
+:100700000F00FF000E4B0F00FF000E4C0F00FF000C
+:100710000E4D0F00FF000E4E0F00FF000E4F0F009A
+:10072000FF000E500F00FF000E510F00FF000E5291
+:100730000F00FF000E530F00FF000E540F00FF00CC
+:100740000E550F00FF000E560F00FF000E570F0052
+:10075000FF000E580F00FF000E590F00FF000E5A49
+:100760000F00FF000E5B0F00FF000E5C0F00FF008C
+:100770000E5D0F00FF000E5E0F00FF000E5F0F000A
+:10078000FF000E600F00FF000E610F00FF000E6201
+:100790000F00FF000E630F00FF000E640F00FF004C
+:1007A0000E650F00FF000E660F00FF000E670F00C2
+:1007B000FF000E680F00FF000E690F00FF000E6AB9
+:1007C0000F00FF000E6B0F00FF000E6C0F00FF000C
+:1007D0000E6D0F00FF000E6E0F00FF000E6F0F007A
+:1007E000FF000E700F00FF000E710F00FF000E7271
+:1007F0000F00FF000E730F00FF000E740F00FF00CC
+:100800000E750F00FF000E760F00FF000E770F0031
+:10081000FF000E780F00FF000E790F00FF000E7A28
+:100820000F00FF000E7B0F00FF000E7C0F00FF008B
+:100830000E7D0F00FF000E7E0F00FF000E7F0F00E9
+:10084000FF000E800F00FF000E810F00FF000E82E0
+:100850000F00FF000E830F00FF000E840F00FF004B
+:100860000E850F00FF000E860F00FF000E870F00A1
+:10087000FF000E880F00FF000E890F00FF000E8A98
+:100880000F00FF000E8B0F00FF000E8C0F00FF000B
+:100890000E8D0F00FF000E8E0F00FF000E8F0F0059
+:1008A000FF000E900F00FF000E910F00FF000E9250
+:1008B0000F00FF000E930F00FF000E940F00FF00CB
+:1008C0000E950F00FF000E960F00FF000E970F0011
+:1008D000FF000E980F00FF000E990F00FF000E9A08
+:1008E0000F00FF000E9B0F00FF000E9C0F00FF008B
+:1008F0000E9D0F00FF000E9E0F00FF000E9F0F00C9
+:10090000FF000EA00F00FF000EA10F00FF000EA2BF
+:100910000F00FF000EA30F00FF000EA40F00FF004A
+:100920000EA50F00FF000EA60F00FF000EA70F0080
+:10093000FF000EA80F00FF000EA90F00FF000EAA77
+:100940000F00FF000EAB0F00FF000EAC0F00FF000A
+:100950000EAD0F00FF000EAE0F00FF000EAF0F0038
+:10096000FF000EB00F00FF000EB10F00FF000EB22F
+:100970000F00FF000EB30F00FF000EB40F00FF00CA
+:100980000EB50F00FF000EB60F00FF000EB70F00F0
+:10099000FF000EB80F00FF000EB90F00FF000EBAE7
+:1009A0000F00FF000EBB0F00FF000EBC0F00FF008A
+:1009B0000EBD0F00FF000EBE0F00FF000EBF0F00A8
+:1009C000FF000EC00F00FF000EC10F00FF000EC29F
+:1009D0000F00FF000EC30F00FF000EC40F00FF004A
+:1009E0000EC50F00FF000EC60F00FF000EC70F0060
+:1009F000FF000EC80F00FF000EC90F00FF000ECA57
+:100A00000F00FF000ECB0F00FF000ECC0F00FF0009
+:100A10000ECD0F00FF000ECE0F00FF000ECF0F0017
+:100A2000FF000ED00F00FF000ED10F00FF000ED20E
+:100A30000F00FF000ED30F00FF000ED40F00FF00C9
+:100A40000ED50F00FF000ED60F00FF000ED70F00CF
+:100A5000FF000ED80F00FF000ED90F00FF000EDAC6
+:100A60000F00FF000EDB0F00FF000EDC0F00FF0089
+:100A70000EDD0F00FF000EDE0F00FF000EDF0F0087
+:100A8000FF000EE00F00FF000EE10F00FF000EE27E
+:100A90000F00FF000EE30F00FF000EE40F00FF0049
+:100AA0000EE50F00FF000EE60F00FF000EE70F003F
+:100AB000FF000EE80F00FF000EE90F00FF000EEA36
+:100AC0000F00FF000EEB0F00FF000EEC0F00FF0009
+:100AD0000EED0F00FF000EEE0F00FF000EEF0F00F7
+:100AE000FF000EF00F00FF000EF10F00FF000EF2EE
+:100AF0000F00FF000EF30F00FF000EF40F00FF00C9
+:100B00000EF50F00FF000EF60F00FF000EF70F00AE
+:100B1000FF000EF80F00FF000EF90F00FF000EFAA5
+:100B20000F00FF000EFB0F00FF000EFC0F00FF0088
+:100B30000EFD0F00FF000EFE0F00FF000EFF0F0066
+:100B4000FF000802FF000B070A440D000C00FF0025
+:100B50000B070A420D000C00FF000B070A430D00B3
+:100B60000C00FF000B070A7C0D000C00FF000B07B8
+:100B70000A7E0D000C00FF000B070A460D000C005A
+:100B8000FF000B070A490D000C00FF000B070A4786
+:100B90000D000C00FF000B070A4A0D000C00FF00BF
+:100BA0000E100F00FF000E110F00FF000E120F00BD
+:100BB000FF000E130F00FF000E140F00FF000E15B4
+:100BC0000F00FF000E160F00FF000E170F00FF00B2
+:100BD0000E180F00FF000E190F00FF000E1A0F0075
+:100BE000FF000E1B0F00FF000E1C0F00FF000E1D6C
+:100BF0000F00FF000E1E0F00FF000E1F0F00FF0072
+:100C00000E200F00FF000E210F00FF000E220F002C
+:100C1000FF000E230F00FF000E240F00FF000E2523
+:100C20000F00FF000E260F00FF000E270F00FF0031
+:100C30000E280F00FF000E290F00FF000E2A0F00E4
+:100C4000FF000E2B0F00FF000E2C0F00FF000E2DDB
+:100C50000F00FF000E2E0F00FF000E2F0F00FF00F1
+:100C60000E300F00FF000E310F00FF000E320F009C
+:100C7000FF000E330F00FF000E340F00FF000E3593
+:100C80000F00FF000E360F00FF000E370F00FF00B1
+:100C90000E380F00FF000E390F00FF000E3A0F0054
+:100CA000FF000E3B0F00FF000E3C0F00FF000E3D4B
+:100CB0000F00FF000E3E0F00FF000E3F0F00FF0071
+:100CC0000E400F00FF000E410F00FF000E420F000C
+:100CD000FF000E430F00FF000E440F00FF000E4503
+:100CE0000F00FF000E460F00FF000E470F00FF0031
+:100CF0000E480F00FF000E490F00FF000E4A0F00C4
+:100D0000FF000E4B0F00FF000E4C0F00FF000E4DBA
+:100D10000F00FF000E4E0F00FF000E4F0F00FF00F0
+:100D20000E500F00FF000E510F00FF000E520F007B
+:100D3000FF000E530F00FF000E540F00FF000E5572
+:100D40000F00FF000E560F00FF000E570F00FF00B0
+:100D50000E580F00FF000E590F00FF000E5A0F0033
+:100D6000FF000E5B0F00FF000E5C0F00FF000E5D2A
+:100D70000F00FF000E5E0F00FF000E5F0F00FF0070
+:100D80000E600F00FF000E610F00FF000E620F00EB
+:100D9000FF000E630F00FF000E640F00FF000E65E2
+:100DA0000F00FF000E660F00FF000E670F00FF0030
+:100DB0000E680F00FF000E690F00FF000E6A0F00A3
+:100DC000FF000E6B0F00FF000E6C0F00FF000E6D9A
+:100DD0000F00FF000E6E0F00FF000E6F0F00FF00F0
+:100DE0000E700F00FF000E710F00FF000E720F005B
+:100DF000FF000E730F00FF000E740F00FF000E7552
+:100E00000F00FF000E760F00FF000E770F00FF00AF
+:100E10000E780F00FF000E790F00FF000E7A0F0012
+:100E2000FF000E7B0F00FF000E7C0F00FF000E7D09
+:100E30000F00FF000E7E0F00FF000E7F0F00FF006F
+:100E40000E800F00FF000E810F00FF000E820F00CA
+:100E5000FF000E830F00FF000E840F00FF000E85C1
+:100E60000F00FF000E860F00FF000E870F00FF002F
+:100E70000E880F00FF000E890F00FF000E8A0F0082
+:100E8000FF000E8B0F00FF000E8C0F00FF000E8D79
+:100E90000F00FF000E8E0F00FF000E8F0F00FF00EF
+:100EA0000E900F00FF000E910F00FF000E920F003A
+:100EB000FF000E930F00FF000E940F00FF000E9531
+:100EC0000F00FF000E960F00FF000E970F00FF00AF
+:100ED0000E980F00FF000E990F00FF000E9A0F00F2
+:100EE000FF000E9B0F00FF000E9C0F00FF000E9DE9
+:100EF0000F00FF000E9E0F00FF000E9F0F00FF006F
+:100F00000EA00F00FF000EA10F00FF000EA20F00A9
+:100F1000FF000EA30F00FF000EA40F00FF000EA5A0
+:100F20000F00FF000EA60F00FF000EA70F00FF002E
+:100F30000EA80F00FF000EA90F00FF000EAA0F0061
+:100F4000FF000EAB0F00FF000EAC0F00FF000EAD58
+:100F50000F00FF000EAE0F00FF000EAF0F00FF00EE
+:100F60000EB00F00FF000EB10F00FF000EB20F0019
+:100F7000FF000EB30F00FF000EB40F00FF000EB510
+:100F80000F00FF000EB60F00FF000EB70F00FF00AE
+:100F90000EB80F00FF000EB90F00FF000EBA0F00D1
+:100FA000FF000EBB0F00FF000EBC0F00FF000EBDC8
+:100FB0000F00FF000EBE0F00FF000EBF0F00FF006E
+:100FC0000EC00F00FF000EC10F00FF000EC20F0089
+:100FD000FF000EC30F00FF000EC40F00FF000EC580
+:100FE0000F00FF000EC60F00FF000EC70F00FF002E
+:100FF0000EC80F00FF000EC90F00FF000ECA0F0041
+:10100000FF000ECB0F00FF000ECC0F00FF000ECD37
+:101010000F00FF000ECE0F00FF000ECF0F00FF00ED
+:101020000ED00F00FF000ED10F00FF000ED20F00F8
+:10103000FF000ED30F00FF000ED40F00FF000ED5EF
+:101040000F00FF000ED60F00FF000ED70F00FF00AD
+:101050000ED80F00FF000ED90F00FF000EDA0F00B0
+:10106000FF000EDB0F00FF000EDC0F00FF000EDDA7
+:101070000F00FF000EDE0F00FF000EDF0F00FF006D
+:101080000EE00F00FF000EE10F00FF000EE20F0068
+:10109000FF000EE30F00FF000EE40F00FF000EE55F
+:1010A0000F00FF000EE60F00FF000EE70F00FF002D
+:1010B0000EE80F00FF000EE90F00FF000EEA0F0020
+:1010C000FF000EEB0F00FF000EEC0F00FF000EED17
+:1010D0000F00FF000EEE0F00FF000EEF0F00FF00ED
+:1010E0000EF00F00FF000EF10F00FF000EF20F00D8
+:1010F000FF000EF30F00FF000EF40F00FF000EF5CF
+:101100000F00FF000EF60F00FF000EF70F00FF00AC
+:101110000EF80F00FF000EF90F00FF000EFA0F008F
+:10112000FF000EFB0F00FF000EFC0F00FF000EFD86
+:101130000F00FF000EFE0F00FF000EFF0F0009055D
+:101140000B000A000D010C7CFF000D000C1EFF00BF
+:101150000D000C00FF000D000C00FF000D000CF551
+:10116000FF000D000C11FF000D000C20FF000D0012
+:101170000C32FF000D000C40FF000D000C13FF00AF
+:101180000D000C00FF000D000C14FF000D020C768A
+:10119000FF000D000C60FF000D000C80FF000D0231
+:1011A0000C00FF000D000C00FF000D000C00FF0004
+:1011B0000D020C00FF000D000C00FF000D000C00E4
+:1011C000FF000D000C00FF000D000C00FF000D00E3
+:1011D0000C00FF000D000C00FF000D000C00FF00D4
+:1011E0000D000C00FF000D000C00FF000D000C00B6
+:1011F000FF000D000C00FF000D000C00FF000D00B3
+:101200000C00FF000D000C00FF000D000C00FF00A3
+:101210000D000C00FF000D000C00FF000D000C0085
+:10122000FF000D000C00FF000D000C00FF000D0082
+:101230000C00FF000D000C00FF000D000C00FF0073
+:101240000D000C00FF000D000C00FF000D000C0055
+:10125000FF000D000C00FF000D000C00FF000D0052
+:101260000C00FF000D000C00FF000D000C00FF0043
+:101270000D000C00FF000D000C00FF000D000C0025
+:10128000FF000D000C00FF000D000C00FF000D0022
+:101290000C00FF000D000C00FF000D000C00FF0013
+:1012A0000D000C00FF000D000C00FF000D000C00F5
+:1012B000FF000D000C00FF000D000C00FF000D00F2
+:1012C0000C00FF000D000C18FF000D000C19FF00B2
+:1012D0000D010C1AFF000D010C20FF000D010C4048
+:1012E000FF000D010C17FF000D000C00FF000D01A9
+:1012F0000C80FF000D010C20FF000D000C10FF0002
+:101300000D010CA0FF000D030CD1FF000D000C001F
+:10131000FF000D010CF2FF000D020C00FF000D009C
+:101320000C13FF000D000C00FF000D000CF4FF007B
+:101330000D020CE0FF000D000C15FF000D000C006D
+:10134000FF000D000C16FF000D000C00FF000D004B
+:101350000C17FF000D000C20FF000D000C00FF001B
+:101360000D000C20FF000D000C50FF000D000C00C4
+:10137000FF000D000C40FF000D000C00FF000D00F1
+:101380000C71FF000D020C00FF000D000C60FF004F
+:101390000D000C00FF000D000C92FF000D000C0072
+:1013A000FF000D000C80FF000D000C00FF000D0081
+:1013B0000CB3FF000D020C00FF000D000CA0FF009D
+:1013C0000D000C00FF000D000CD4FF000D000C0000
+:1013D000FF000D000C40FF000D000C80FF000D0011
+:1013E0000CF5FF000D000C20FF000D000C70FF003D
+:1013F0000D000CA0FF000D020C11FF000D000C16DB
+:10140000FF000D000C00FF000D000C00FF000D00A0
+:101410000C00FF000D000C20FF000D020C00FF006F
+:101420000D000C20FF000D000C10FF000D000C172C
+:10143000FF000D000C1BFF000D000C1DFF000D0236
+:101440000CDFFF0009050B010A000D000C00FF0076
+:101450000D000C00FF000D000C00FF000D020C0041
+:10146000FF000D000C19FF000D000C1FFF000D0008
+:101470000C00FF000D000C00FF000D000C00FF0031
+:101480000D030CD8FF000D000C00FF000D020C2016
+:10149000FF000D000C19FF000D000C00FF000D00F7
+:1014A0000C00FF000D000C18FF000D010CC0FF0028
+:1014B0000D010CFAFF000D000C1AFF000D000C00CE
+:1014C000FF000D000C00FF000D000C00FF000D00E0
+:1014D0000C00FF000D000C00FF000D000C00FF00D1
+:1014E0000D000C00FF000D000C00FF000D000C00B3
+:1014F000FF000D000C00FF000D000C00FF000D00B0
+:101500000C00FF000D000C00FF000D000C00FF00A0
+:101510000D000C00FF000D000C00FF000D000C0082
+:10152000FF000D000C00FF000D000C00FF000D007F
+:101530000C00FF000D000C00FF000D000C00FF0070
+:101540000D000C00FF000D000C00FF000D000C0052
+:10155000FF000D000C00FF000D000C00FF000D004F
+:101560000C00FF000D000C00FF000D000C00FF0040
+:101570000D000C00FF000D000C00FF000D000C0022
+:10158000FF000D000C00FF000D000C00FF000D001F
+:101590000C00FF000D000C00FF000D000C00FF0010
+:1015A0000D000C00FF000D000C00FF000D000C00F2
+:1015B000FF000D000C00FF000D000C00FF000D00EF
+:1015C0000C00FF000D000C00FF000D020C40FF009E
+:1015D0000D020C60FF000D000C00FF000D000C0060
+:1015E000FF000D000C00FF000D020CC0FF000D02FB
+:1015F0000C80FF000D000C00FF000D020CFBFF0033
+:101600000D020CA0FF000D000C00FF000D000C1BD4
+:10161000FF000D020CD7FF000D000C00FF000D02B3
+:101620000CF7FF000D030C20FF000D030C00FF0062
+:101630000D000C00FF000D000C1CFF000D030C3C06
+:10164000FF000D000C00FF000D030C3FFF000D001C
+:101650000C00FF000D030CC0FF000D000C00FF008C
+:101660000D030CDFFF000D000C00FF000D000C004F
+:10167000FF000D030C5DFF000D000C00FF000D03CB
+:101680000CC0FF000D000C00FF000D030C7DFF00DF
+:101690000D000C00FF000D030CC0FF000D000C003E
+:1016A000FF000D030C9EFF000D000C00FF000D035A
+:1016B0000CC0FF000D000C00FF000D030CBEFF006E
+:1016C0000D000C00FF000D030CC0FF000D000C000E
+:1016D000FF000D000C00FF000D000C00FF000D00CE
+:1016E0000C00FF000D000C1BFF000D000C00FF00A4
+:1016F0000D000C00FF000D000C00FF000D020CDBC4
+:10170000FF000D000C00FF000D020CDBFF000D00C0
+:101710000C00FF000D020CE0FF000D000C00FF00AC
+:101720000D020CFBFF000D000C00FF000D020CC0B1
+:10173000FF000D020C40FF000D020CFBFF000D022C
+:101740000C60FF000D000C1BFF0009050B020A00D6
+:101750000CC4FF000C00FF000C44FF000C07FF004E
+:101760000C44FF000C00FF000C40FF000C25FF00A4
+:101770000C01FF000C06FF000CC4FF000C07FF006B
+:101780000C40FF000C25FF000C01FF000C00FF00C7
+:101790000C46FF000C46FF000C00FF000C00FF0091
+:1017A0000C00FF000C00FF000C00FF000C00FF000D
+:1017B0000C00FF000C00FF000C00FF000C00FF00FD
+:1017C0000C00FF000C00FF000C00FF000C00FF00ED
+:1017D0000C00FF000C00FF000C00FF000C00FF00DD
+:1017E0000C00FF000C00FF000C00FF000C00FF00CD
+:1017F0000C00FF000C00FF000C00FF000C00FF00BD
+:101800000C00FF000C00FF000C00FF000C00FF00AC
+:101810000C00FF000C00FF000C00FF000C00FF009C
+:101820000C00FF000C00FF000C00FF000C00FF008C
+:101830000C00FF000C00FF000C00FF000C00FF007C
+:101840000C00FF000C00FF000C00FF000C00FF006C
+:101850000C46FF000C07FF000C05FF000C05FF0005
+:101860000C05FF000C04FF000C07FF000C05FF0037
+:101870000C04FF000C07FF000C05FF000C44FF00E8
+:101880000C46FF000C44FF000C46FF000C46FF0016
+:101890000C07FF000C05FF000C44FF000C46FF0086
+:1018A0000C05FF000C46FF000C05FF000C46FF0076
+:1018B0000C05FF000C46FF000C05FF000C44FF0068
+:1018C0000C46FF000C05FF000C07FF000C44FF0056
+:1018D0000C46FF000C05FF000C07FF000C44FF0046
+:1018E0000C46FF000C05FF000C07FF000C44FF0036
+:1018F0000C46FF000C05FF000C07FF000C44FF0026
+:101900000C05FF000C05FF000C05FF000C44FF0058
+:101910000C05FF000C05FF000C05FF000C46FF0046
+:101920000C05FF000C46FF000C05FF000C46FF00F5
+:101930000C05FF000C46FF000C05FF000C46FF00E5
+:101940000C07FF000C46FF000C07FF000C44FF00D3
+:1019500009050B030A000C07FF000C40FF000C00F8
+:10196000FF000C00FF000C00FF000C47FF000C0004
+:10197000FF000C40FF000C00FF000C40FF000C06B5
+:10198000FF000C40FF000C00FF000C00FF000C00EB
+:10199000FF000C00FF000C00FF000C00FF000C001B
+:1019A000FF000C00FF000C00FF000C00FF000C000B
+:1019B000FF000C00FF000C00FF000C00FF000C00FB
+:1019C000FF000C00FF000C00FF000C00FF000C00EB
+:1019D000FF000C00FF000C00FF000C00FF000C00DB
+:1019E000FF000C00FF000C00FF000C00FF000C00CB
+:1019F000FF000C00FF000C00FF000C00FF000C00BB
+:101A0000FF000C00FF000C00FF000C00FF000C00AA
+:101A1000FF000C00FF000C00FF000C00FF000C009A
+:101A2000FF000C00FF000C00FF000C00FF000C008A
+:101A3000FF000C00FF000C00FF000C00FF000C007A
+:101A4000FF000C00FF000C00FF000C00FF000C006A
+:101A5000FF000C00FF000C80FF000C80FF000CC09A
+:101A6000FF000C00FF000C00FF000C40FF000C000A
+:101A7000FF000C00FF000C00FF000C40FF000C00FA
+:101A8000FF000C40FF000C00FF000C60FF000C008A
+:101A9000FF000C70FF000C00FF000C40FF000C006A
+:101AA000FF000C40FF000C00FF000C42FF000C0088
+:101AB000FF000C40FF000C00FF000C02FF000C00B8
+:101AC000FF000C40FF000C00FF000C00FF000C00AA
+:101AD000FF000C40FF000C00FF000C00FF000C009A
+:101AE000FF000C40FF000C00FF000C00FF000C008A
+:101AF000FF000C40FF000C00FF000C00FF000C007A
+:101B0000FF000C40FF000C00FF000C00FF000C0069
+:101B1000FF000C42FF000C00FF000C40FF000C0017
+:101B2000FF000C42FF000C00FF000C02FF000C0045
+:101B3000FF000C02FF000C00FF000C02FF000C0075
+:101B4000FF000C42FF000C00FF000CC0FF000C0067
+:101B5000FF000C40FF0009050B040A000C63FF00A6
+:101B60000C03FF000C26FF000C02FF000C2CFF00F2
+:101B70000C00FF000C24FF000C00FF000C2EFF00E7
+:101B80000C02FF000C02FF000C02FF000C00FF0023
+:101B90000C00FF000C00FF000C00FF000C00FF0019
+:101BA0000C00FF000C00FF000C00FF000C00FF0009
+:101BB0000C00FF000C00FF000C00FF000C00FF00F9
+:101BC0000C00FF000C00FF000C00FF000C00FF00E9
+:101BD0000C00FF000C00FF000C00FF000C00FF00D9
+:101BE0000C00FF000C00FF000C00FF000C00FF00C9
+:101BF0000C00FF000C00FF000C00FF000C00FF00B9
+:101C00000C00FF000C00FF000C00FF000C00FF00A8
+:101C10000C00FF000C00FF000C00FF000C00FF0098
+:101C20000C00FF000C00FF000C00FF000C00FF0088
+:101C30000C00FF000C00FF000C00FF000C00FF0078
+:101C40000C00FF000C00FF000C00FF000C00FF0068
+:101C50000C00FF000C00FF000C00FF000C00FF0058
+:101C60000C01FF000C20FF000C00FF000C60FF00C7
+:101C70000C00FF000C20FF000C00FF000C20FF00F8
+:101C80000C00FF000C20FF000C00FF000C20FF00E8
+:101C90000C00FF000C20FF000C00FF000C20FF00D8
+:101CA0000C00FF000C20FF000C00FF000C20FF00C8
+:101CB0000C00FF000C60FF000C00FF000C20FF0078
+:101CC0000C00FF000C60FF000C00FF000C20FF0068
+:101CD0000C00FF000C60FF000C00FF000C20FF0058
+:101CE0000C00FF000C60FF000C00FF000C20FF0048
+:101CF0000C00FF000C60FF000C00FF000C20FF0038
+:101D00000C00FF000C60FF000C00FF000C20FF0027
+:101D10000C00FF000C20FF000C00FF000C22FF0055
+:101D20000C02FF000C22FF000C02FF000C20FF0041
+:101D30000C00FF000C60FF000C00FF000C22FF00F5
+:101D40000C02FF000C62FF000C02FF000C20FF00E1
+:101D50000C01FF000C21FF000C01FF0009010B0624
+:101D60000A000D000C00FF000A020D000C00FF002D
+:101D70000A040D000C00FF000A060D000C00FF0015
+:101D80000A080D000C00FF000A0A0D000C00FF00FD
+:101D90000A0C0D000C00FF000A0E0D000C00FF00E5
+:101DA0000A100D000C00FF000A120D000C00FF00CD
+:101DB0000A140D000C00FF000A160D000C00FF00B5
+:101DC0000A180D000C00FF000A1A0D000C00FF009D
+:101DD0000A1C0D000C00FF000A1E0D000C00FF0085
+:101DE0000A200D000C00FF000A220D000C00FF006D
+:101DF0000A240D000C00FF000A260D000C00FF0055
+:101E00000A280D000C00FF000A2A0D000C00FF003C
+:101E10000A2C0D000C00FF000A2E0D000C00FF0024
+:101E20000A300D000C00FF000A320D000C00FF000C
+:101E30000A340D000C00FF000A360D000C00FF00F4
+:101E40000A380D000C00FF000A3A0D000C00FF00DC
+:101E50000A3C0D000C00FF000A3E0D000C00FF00C4
+:101E60000A400D000C00FF000A420D030C00FF00A9
+:101E70000A440D010C00FF000A460D0A0C21FF0068
+:101E80000A480D0D0C23FF000A4A0D230C1BFF000E
+:101E90000A4C0D370C8FFF000A4E0D450C77FF00E2
+:101EA0000A500D520CE2FF000A520D1C0C92FF006A
+:101EB0000A540D1C0C52FF000A560D070C00FF00BF
+:101EC0000A580D2F0CC6FF000A5A0D0B0C00FF001C
+:101ED0000A5C0D300C06FF000A5E0D170C00FF00B7
+:101EE0000A600D3D0CDAFF000A620D290C00FF00AC
+:101EF0000A640D3E0C41FF000A660D390C00FF001C
+:101F00000A680D4C0C48FF000A6A0D490C00FF00DE
+:101F10000A6C0D4C0C6CFF000A6E0D110CD2FF0008
+:101F20000A700D160C0CFF000A720D000C00FF0069
+:101F30000A740D000C80FF000A760D0F0C00FF00E4
+:101F40000A780D000C80FF000A7A0D130C00FF00C8
+:101F50000A7C0D800C00FF000A7E0D800C80FF00C3
+:101F600009050B070A000D0F0CFFFF000D000C0008
+:101F7000FF000D080C00FF000D080C00FF000D0213
+:101F80000C00FF000D000C00FF000D000C00FF0016
+:101F90000D0F0CFFFF000D000C00FF000D000C00EA
+:101FA000FF000D080C00FF000D080C00FF000D00E5
+:101FB0000C00FF000D0F0CFFFF000D000C00FF00D8
+:101FC0000D000C00FF000D0F0CFFFF000D0F0CFFAC
+:101FD000FF000D000C00FF000D000C00FF000D00C5
+:101FE0000C00FF000D000C00FF000D000C00FF00B6
+:101FF0000D000C00FF000D000C00FF000D000C0098
+:10200000FF000D000C00FF000D000C00FF000D0094
+:102010000C00FF000D000C00FF000D000C00FF0085
+:102020000D000C00FF000D000C00FF000D000C0067
+:10203000FF000D000C00FF000D000C00FF000D0064
+:102040000C00FF000D000C00FF000D000C00FF0055
+:102050000D000C00FF000D000C00FF000D000C0037
+:10206000FF000D000C00FF000D000C00FF000D0034
+:102070000C00FF000D000C00FF000D000C00FF0025
+:102080000D000C00FF000D000C00FF000D000C0007
+:10209000FF000D000C00FF000D000C00FF000D0004
+:1020A0000C00FF000D000C00FF000D000C00FF00F5
+:1020B0000D000C00FF000D000C00FF000D000C00D7
+:1020C000FF000D000C00FF000D000C00FF000D00D4
+:1020D0000C00FF000D000C00FF000D000C00FF00C5
+:1020E0000D000C00FF000D000C00FF000D000C00A7
+:1020F000FF000D000C00FF000D000C00FF000D00A4
+:102100000C00FF000D000C00FF000D000C00FF0094
+:102110000D000C00FF000D000C00FF000D000C0076
+:10212000FF000D000C00FF000D0F0CFFFF000D0F56
+:102130000CFFFF000D0F0CFFFF000D0F0CFFFF0049
+:102140000D020CE9FF000D060C8CFF000D060C8C37
+:10215000FF000D0F0CFFFF000D1A0C75FF000D0D99
+:102160000C8BFF000D040CE9FF000D0B0C16FF009B
+:102170000D1A0C38FF000D0D0CC8FF000D040C6F7C
+:10218000FF000D0B0C91FF000D0F0CFFFF000D0663
+:102190000C40FF000D060C40FF000D020C8FFF00ED
+:1021A0000D0F0CFFFF000D060C62FF000D060C6208
+:1021B000FF000D020C7BFF000D0F0CFFFF000D0652
+:1021C0000C97FF000D060C97FF000D020C52FF004C
+:1021D0000D0F0CFFFF000D060CF6FF000D060CF6B0
+:1021E000FF000D020C19FF000D050C55FF000D0539
+:1021F0000C55FF000D050C55FF000D050C55FF009B
+:102200000D050C55FF000D050C55FF000D050C5577
+:10221000FF000D050C55FF000D140CDAFF000D0D2D
+:102220000C93FF000D040CDAFF000D050C93FF006A
+:102230000D140CDAFF000D0D0C93FF000D040CDAE9
+:10224000FF000D050C93FF000D000C00FF000D00BA
+:102250000C00FF000D000C00FF000D000C00FF0043
+:102260000D020C00FF000E010F00FF000E020F0018
+:10227000FF000E010F01FF000E020F00FF000E0114
+:102280000F02FF000E020F00FF000E010F03FF0000
+:102290000E020F00FF000E010F04FF000E020F00E0
+:1022A000FF000E010F05FF000E020F00FF000E01E0
+:1022B0000F06FF000E020F00FF000E010F07FF00C8
+:1022C0000E020F00FF000E010F08FF000E020F00AC
+:1022D000FF000E010F09FF000E020F00FF000E01AC
+:1022E0000F0AFF000E020F00FF000E010F0BFF0090
+:1022F0000E020F00FF000E010F0CFF000E020F0078
+:10230000FF000E010F0DFF000E020F00FF000E0177
+:102310000F0EFF000E020F00FF000E010F0FFF0057
+:102320000E020F00FF000EB00F20FF000EB10F20B5
+:10233000FF000EB20F20FF000EB30F20FF000EB4FF
+:102340000F20FF000EB50F20FF000EB60F20FF007C
+:102350000EB70F20FF000EB80F20FF000EB90F20A0
+:10236000FF000EBA0F20FF000EBB0F20FF000EBCB7
+:102370000F20FF000EBD0F20FF000EBE0F20FF003C
+:102380000EBF0F20FF000EF00F20FF000EF10F20F8
+:10239000FF000EF20F20FF000EF30F20FF000EF4DF
+:1023A0000F20FF000EF50F20FF000EF60F20FF009C
+:1023B0000EF70F20FF000EF80F20FF000EF90F2080
+:1023C000FF000EFA0F20FF000EFB0F20FF000EFC97
+:1023D0000F20FF000EFD0F20FF000EFE0F20FF005C
+:1023E0000EFF0F20FF000E100FFFFF000E110FFF5A
+:1023F000FF000E120FFFFF000E130FFFFF000E1461
+:102400000FFFFF000E150FFFFF000E160FFFFF005E
+:102410000E170FFFFF000E180FFFFF000E190FFF22
+:10242000FF000E1A0FFFFF000E1B0FFFFF000E1C18
+:102430000FFFFF000E1D0FFFFF000E1E0F40FF00DD
+:102440000E1F0FFFFF000E200FFFFF000E210FFFDA
+:10245000FF000E220FFFFF000E230FFFFF000E24D0
+:102460000FFFFF000E250FFFFF000E260FFFFF00DE
+:102470000E270FFFFF000E280FFFFF000E290FFF92
+:10248000FF000E2A0FFFFF000E2B0FFFFF000E2C88
+:102490000FFFFF000E2D0FFFFF000E2E0F00FF009D
+:1024A0000E2F0F00FF000E300F00FF000E310F0047
+:1024B000FF000E320F00FF000E330F00FF000E343E
+:1024C0000F00FF000E350F00FF000E360F00FF005B
+:1024D0000E370F00FF000E380F00FF000E390F00FF
+:1024E000FF000E3A0F00FF000E3B0F00FF000E3CF6
+:1024F0000F00FF000E3D0F00FF000E3E0F00FF001B
+:102500000E3F0F20FF000E400F00FF000E410F0096
+:10251000FF000E420F00FF000E430F00FF000E44AD
+:102520000F00FF000E450F00FF000E460F00FF00DA
+:102530000E470F00FF000E480F00FF000E490F006E
+:10254000FF000E4A0F00FF000E4B0F00FF000E4C65
+:102550000F00FF000E4D0F00FF000E4E0F0EFF008C
+:102560000E4F0F0EFF000E500F00FF000E510F0018
+:10257000FF000E520F00FF000E530F00FF000E541D
+:102580000F00FF000E550F00FF000E560F00FF005A
+:102590000E570F00FF000E580F00FF000E590F00DE
+:1025A000FF000E5A0F00FF000E5B0F00FF000E5CD5
+:1025B0000F00FF000E5D0F00FF000E5E0F00FF001A
+:1025C0000E5F0F00FF000E600F00FF000E610F0096
+:1025D000FF000E620F00FF000E630F00FF000E648D
+:1025E0000F00FF000E650F00FF000E660F00FF00DA
+:1025F0000E670F00FF000E680F00FF000E690F004E
+:10260000FF000E6A0F00FF000E6B0F00FF000E6C44
+:102610000F40FF000E6D0F00FF000E6E0F40FF0019
+:102620000E6F0F40FF000E700FC0FF000E710FC045
+:10263000FF000E720FC0FF000E730FC0FF000E747C
+:102640000FC0FF000E750FC0FF000E760FC0FF0019
+:102650000E770FC0FF000E780FC0FF000E790FC07D
+:10266000FF000E7A0FC0FF000E7B0FC0FF000E7C34
+:102670000FC0FF000E7D0FC0FF000E7E0FC0FF00D9
+:102680000E7F0FC0FF000E800F00FF000E810F00B5
+:10269000FF000E820F00FF000E830F00FF000E846C
+:1026A0000F00FF000E850F00FF000E860F00FF00D9
+:1026B0000E870F00FF000E880F00FF000E890F002D
+:1026C000FF000E8A0F00FF000E8B0F00FF000E8C24
+:1026D0000F00FF000E8D0F00FF000E8E0F00FF0099
+:1026E0000E8F0F00FF000E900F00FF000E910F00E5
+:1026F000FF000E920F00FF000E930F00FF000E94DC
+:102700000F00FF000E950F00FF000E960F00FF0058
+:102710000E970F00FF000E980F00FF000E990F009C
+:10272000FF000E9A0F00FF000E9B0F00FF000E9C93
+:102730000F00FF000E9D0F00FF000E9E0F00FF0018
+:102740000E9F0F00FF000EA00F00FF000EA10F0054
+:10275000FF000EA20F00FF000EA30F00FF000EA44B
+:102760000F00FF000EA50F00FF000EA60F00FF00D8
+:102770000EA70F00FF000EA80F00FF000EA90F000C
+:10278000FF000EAA0F00FF000EAB0F00FF000EAC03
+:102790000F00FF000EAD0F00FF000EAE0F00FF0098
+:1027A0000EAF0F00FF000EC00F00FF000EC10F00A4
+:1027B000FF000EC20F00FF000EC30F00FF000EC48B
+:1027C0000F00FF000EC50F00FF000EC60F00FF0038
+:1027D0000EC70F00FF000EC80F00FF000EC90F004C
+:1027E000FF000ECA0F00FF000ECB0F00FF000ECC43
+:1027F0000F00FF000ECD0F00FF000ECE0F00FF00F8
+:102800000ECF0F00FF000ED00F00FF000ED10F0003
+:10281000FF000ED20F00FF000ED30F00FF000ED4FA
+:102820000F00FF000ED50F00FF000ED60F00FF00B7
+:102830000ED70F00FF000ED80F00FF000ED90F00BB
+:10284000FF000EDA0F00FF000EDB0F00FF000EDCB2
+:102850000F00FF000EDD0F00FF000EDE0F10FF0067
+:102860000EDF0F10FF000EE00F00FF000EE10F0063
+:10287000FF000EE20F00FF000EE30F00FF000EE46A
+:102880000F00FF000EE50F00FF000EE60F00FF0037
+:102890000EE70F00FF000EE80F00FF000EE90F002B
+:1028A000FF000EEA0F00FF000EEB0F00FF000EEC22
+:1028B0000F00FF000EED0F00FF000EEE0F00FF00F7
+:1028C0000EEF0F00FF000E010F000E020F01FF00C0
+:1028D0000E010F010E020F01FF000E010F020E028A
+:1028E0000F01FF000E010F030E020F01FF000E018A
+:1028F0000F040E020F01FF000E010F050E020F0163
+:10290000FF000E010F060E020F01FF000E010F0760
+:102910000E020F01FF000E010F080E020F01FF0053
+:102920000E010F090E020F01FF000E010F0A0E0229
+:102930000F01FF000E010F0B0E020F01FF000E0131
+:102940000F0C0E020F01FF000E010F0D0E020F0102
+:10295000FF000E010F0E0E020F01FF000E010F0F00
+:102960000E020F01FF0008020B070A460D000C00C3
+:10297000FF000B070A490D000C00FF000B000A4B7B
+:102980000D030C11FF000B000A4D0D010C32FF006E
+:102990000B070A460D000C00FF000B070A490D004B
+:1029A0000C00FF000B070A400D000C00FF000B0796
+:1029B0000A410D000C00FF000B010A400D020C4003
+:1029C000FF000B010A410D020C60FF000B070A40DB
+:1029D0000D000C00FF000B070A410D000C00FF006A
+:1029E0000B070A470D000C00FF000B070A4A0D00F9
+:1029F0000C00FF000B000A470D010C00FF000B004C
+:102A00000A4A0D010C20FF000B070A470D000C00BD
+:102A1000FF000B070A4A0D000C00FF000B070A7CA1
+:102A20000D000C00FF000B070A7E0D000C00FF00DC
+:102A30000B000A000D010C1CFF000B070A7C0D00A7
+:102A40000C00FF000B070A7E0D000C00FF000B07B7
+:102A50000A440D000C00FF000B000A440D010C009D
+:102A6000FF000B070A440D000C00FF000B070A4291
+:102A70000D000C00FF000B070A430D000C00FF00C7
+:102A80000B000A420D010C1AFF000B000A430D0156
+:102A90000C20FF000B070A420D000C00FF000B0783
+:102AA0000A430D000C00FF000B070A400D000C004C
+:102AB000FF000B070A410D000C00FF000B010A404C
+:102AC0000D020C40FF000B010A410D020C60FF00DB
+:102AD0000B070A400D000C00FF000B070A410D0018
+:102AE0000C00FF000B070A440D0F0CFFFF000B0743
+:102AF0000A420D000C00FF000B070A430D000C00FA
+:102B0000FF000B070A400D000C00FF000B070A41F5
+:102B10000D000C00FF000B070A510D060C40FF00D2
+:102B20000B070A500D060C40FF000B070A4F0D0360
+:102B30000C81FF000B070A530D1A0C76FF000B07E0
+:102B40000A540D0D0C8BFF000B070A550D040CE900
+:102B5000FF000B070A560D0B0C17FF000B070A5757
+:102B60000D1A0C38FF000B070A580D0D0CC9FF0099
+:102B70000B070A590D040C6FFF000B070A5A0D0BC7
+:102B80000C91FF000B070A730D140CDAFF000B0702
+:102B90000A740D0D0C93FF000B070A750D040CD978
+:102BA000FF000B070A760D050C93FF000B070A7751
+:102BB0000D140CDAFF000B070A780D0D0C93FF00C3
+:102BC0000B070A790D040CD9FF000B070A7A0D05D3
+:102BD0000C93FF000B070A5E0D030C68FF000B0748
+:102BE0000A5C0D040C31FF000B070A5D0D040C316B
+:102BF000FF000B070A620D030C52FF000B070A606F
+:102C00000D040C76FF000B070A610D040C76FF0023
+:102C10000B070A660D030C2EFF000B070A640D0458
+:102C20000CDAFF000B070A650D040CDAFF000B0736
+:102C30000A6A0D020CF6FF000B070A680D050C620C
+:102C4000FF000B070A690D050C62FF000B060A4620
+:102C50000D0A0C22FF000B060A480D0D0C24FF0084
+:102C60000B060A6E0D110CD3FF000B060A700D1532
+:102C70000CCBFF000B060A520D200C93FF000B0635
+:102C80000A540D200C54FF000B060A4A0D270C1D98
+:102C9000FF000B060A580D2F0CC8FF000B060A5C3C
+:102CA0000D300C07FF000B060A4C0D370C90FF008F
+:102CB0000B060A600D3D0CDBFF000B060A640D3E9F
+:102CC0000C42FF000B060A4E0D450C78FF000B0668
+:102CD0000A680D4C0C48FF000B060A6C0D4C0C6C7E
+:102CE000FF000B060A500D520CE2FF000B060A42D1
+:102CF0000D020CBAFF00FF000E1E0F14FF000EDEC7
+:102D00000F20FF000EDF0F20FF000B060A780D00DA
+:102D10000C40FF000B070A030D0F0CFFFF000B0711
+:102D20000A0B0D0F0CFFFF000B070A020D000C0031
+:102D3000FF000B070A0A0D000C00FF000B070A46F4
+:102D40000D000C00FF000B070A490D000C000905DF
+:102D50000B000A100D000C00FF000D000C00FF001E
+:102D60000D020C00FF000D000C00FF000D000C0018
+:102D7000FF000D000C00FF000D000C00FF000D0017
+:102D80000C00FF000D000C00FF000D000C00FF0008
+:102D90000D000C00FF000D000C00FF000D000C00EA
+:102DA000FF000D000C00FF000D000C00FF000D00E7
+:102DB0000C00FF000D000C00FF000D000C00FF00D8
+:102DC0000D000C00FF000D000C00FF000D000C00BA
+:102DD000FF000D000C00FF000D000C00FF000D00B7
+:102DE0000C00FF000D000C00FF000D000C00FF00A8
+:102DF0000D000C00FF000D000C00FF000D000C008A
+:102E0000FF000D000C00FF000D000C00FF000D0086
+:102E10000C00FF000D000C00FF000D000C00FF0077
+:102E20000D000C00FF000D000C00FF000D000C0059
+:102E3000FF000D000C00FF000D000C00FF000D0056
+:102E40000C00FF000D000C00FF000D000C00FF0047
+:102E50000D000C00FF000D000C00FF000D000C0029
+:102E6000FF000D000C00FF000D000C00FF000D0026
+:102E70000C00FF0009050B010A100D010CC0FF003A
+:102E80000D010CFAFF000D000C1AFF000D000C00E4
+:102E9000FF000D000C00FF000D000C00FF000D00F6
+:102EA0000C00FF000D000C00FF000D000C00FF00E7
+:102EB0000D000C00FF000D000C00FF000D000C00C9
+:102EC000FF000D000C00FF000D000C00FF000D00C6
+:102ED0000C00FF000D000C00FF000D000C00FF00B7
+:102EE0000D000C00FF000D000C00FF000D000C0099
+:102EF000FF000D000C00FF000D000C00FF000D0096
+:102F00000C00FF000D000C00FF000D000C00FF0086
+:102F10000D000C00FF000D000C00FF000D000C0068
+:102F2000FF000D000C00FF000D000C00FF000D0065
+:102F30000C00FF000D000C00FF000D000C00FF0056
+:102F40000D000C00FF000D000C00FF000D000C0038
+:102F5000FF000D000C00FF000D000C00FF000D0035
+:102F60000C00FF000D000C00FF000D000C00FF0026
+:102F70000D000C00FF000D000C00FF000D000C0008
+:102F8000FF000D000C00FF000D000C00FF000D0005
+:102F90000C00FF000D000C00FF00FF00FF00090502
+:102FA0000B020A100C46FF000C46FF000C00FF004D
+:102FB0000C00FF000C00FF000C00FF000C00FF00E5
+:102FC0000C00FF000C00FF000C00FF000C00FF00D5
+:102FD0000C00FF000C00FF000C00FF000C00FF00C5
+:102FE0000C00FF000C00FF000C00FF000C00FF00B5
+:102FF0000C00FF000C00FF000C00FF000C00FF00A5
+:103000000C00FF000C00FF000C00FF000C00FF0094
+:103010000C00FF000C00FF000C00FF000C00FF0084
+:103020000C00FF000C00FF000C00FF000C00FF0074
+:103030000C00FF000C00FF000C00FF000C00FF0064
+:103040000C00FF000C00FF000C00FF000C00FF0054
+:103050000C00FF000C00FF000C00FF000C00FF0044
+:103060000C00FF0009050B030A100C00FF000C0008
+:10307000FF000C00FF000C00FF000C00FF000C0024
+:10308000FF000C00FF000C00FF000C00FF000C0014
+:10309000FF000C00FF000C00FF000C00FF000C0004
+:1030A000FF000C00FF000C00FF000C00FF000C00F4
+:1030B000FF000C00FF000C00FF000C00FF000C00E4
+:1030C000FF000C00FF000C00FF000C00FF000C00D4
+:1030D000FF000C00FF000C00FF000C00FF000C00C4
+:1030E000FF000C00FF000C00FF000C00FF000C00B4
+:1030F000FF000C00FF000C00FF000C00FF000C00A4
+:10310000FF000C00FF000C00FF000C00FF000C0093
+:10311000FF000C00FF000C00FF000C00FF000C0083
+:10312000FF000C00FF000C00FF0009050B040A1053
+:103130000C00FF000C00FF000C00FF000C00FF0063
+:103140000C00FF000C00FF000C00FF000C00FF0053
+:103150000C00FF000C00FF000C00FF000C00FF0043
+:103160000C00FF000C00FF000C00FF000C00FF0033
+:103170000C00FF000C00FF000C00FF000C00FF0023
+:103180000C00FF000C00FF000C00FF000C00FF0013
+:103190000C00FF000C00FF000C00FF000C00FF0003
+:1031A0000C00FF000C00FF000C00FF000C00FF00F3
+:1031B0000C00FF000C00FF000C00FF000C00FF00E3
+:1031C0000C00FF000C00FF000C00FF000C00FF00D3
+:1031D0000C00FF000C00FF000C00FF000C00FF00C3
+:1031E0000C00FF000C00FF000C00FF000C00FF00B3
+:1031F00009010B060A100D000C00FF000A120D0059
+:103200000C00FF000A140D000C00FF000A160D0050
+:103210000C00FF000A180D000C00FF000A1A0D0038
+:103220000C00FF000A1C0D000C00FF000A1E0D0020
+:103230000C00FF000A200D000C00FF000A220D0008
+:103240000C00FF000A240D000C00FF000A260D00F0
+:103250000C00FF000A280D000C00FF000A2A0D00D8
+:103260000C00FF000A2C0D000C00FF000A2E0D00C0
+:103270000C00FF000A300D000C00FF000A320D00A8
+:103280000C00FF000A340D000C00FF000A360D0090
+:103290000C00FF000A380D000C00FF000A3A0D0078
+:1032A0000C00FF000A3C0D000C00FF000A3E0D0060
+:1032B0000C00FF0009050B070A100D0F0CFFFF00A3
+:1032C0000D0F0CFFFF000D000C00FF000D000C00A7
+:1032D000FF000D000C00FF000D000C00FF000D00B2
+:1032E0000C00FF000D000C00FF000D000C00FF00A3
+:1032F0000D000C00FF000D000C00FF000D000C0085
+:10330000FF000D000C00FF000D000C00FF000D0081
+:103310000C00FF000D000C00FF000D000C00FF0072
+:103320000D000C00FF000D000C00FF000D000C0054
+:10333000FF000D000C00FF000D000C00FF000D0051
+:103340000C00FF000D000C00FF000D000C00FF0042
+:103350000D000C00FF000D000C00FF000D000C0024
+:10336000FF000D000C00FF000D000C00FF000D0021
+:103370000C00FF000D000C00FF000D000C00FF0012
+:103380000D000C00FF000D000C00FF000D000C00F4
+:10339000FF000D000C00FF000D000C00FF000D00F1
+:1033A0000C00FF000D000C00FF000D000C00FF00E2
+:1033B0000D000C00FF000D000C00FF000D000C00C4
+:1033C000FF000D000C00FF000D000C00FF000D00C1
+:1033D0000C00FF000D000C00FF000E010F00FF00AD
+:1033E0000E020F00FF000E010F01FF000E020F0082
+:1033F000FF000E010F02FF000E020F00FF000E0182
+:103400000F03FF000E020F00FF000E010F04FF006C
+:103410000E020F00FF000E010F05FF000E020F004D
+:10342000FF000E010F06FF000E020F00FF000E014D
+:103430000F07FF000E020F00FF000EB00F20FF006D
+:103440000EB10F20FF000EB20F20FF000EB30F20B1
+:10345000FF000EB40F20FF000EB50F20FF000EB6C8
+:103460000F20FF000EB70F20FF000EF00F20FF000F
+:103470000EF10F20FF000EF20F20FF000EF30F20C1
+:10348000FF000EF40F20FF000EF50F20FF000EF6D8
+:103490000F20FF000EF70F20FF000E100FFFFF00A0
+:1034A0000E110FFFFF000E120FFFFF000E130FFF94
+:1034B000FF000E140FFFFF000E150FFFFF000E168A
+:1034C0000FFFFF000E170FFFFF000E200FFFFF0082
+:1034D0000E210FFFFF000E220FFFFF000E230FFF34
+:1034E000FF000E240FFFFF000E250FFFFF000E262A
+:1034F0000FFFFF000E270FFFFF000E300F00FF0031
+:103500000E310F00FF000E320F00FF000E330F00D0
+:10351000FF000E340F00FF000E350F00FF000E36C7
+:103520000F00FF000E370F00FF000E400F00FF00DE
+:103530000E410F00FF000E420F00FF000E430F0070
+:10354000FF000E440F00FF000E450F00FF000E4667
+:103550000F00FF000E470F00FF000E500F00FF008E
+:103560000E510F00FF000E520F00FF000E530F0010
+:10357000FF000E540F00FF000E550F00FF000E5607
+:103580000F00FF000E570F00FF000E600F00FF003E
+:103590000E610F00FF000E620F00FF000E630F00B0
+:1035A000FF000E640F00FF000E650F00FF000E66A7
+:1035B0000F00FF000E670F00FF000E700FC0FF002E
+:1035C0000E710FC0FF000E720FC0FF000E730FC010
+:1035D000FF000E740FC0FF000E750FC0FF000E76C7
+:1035E0000FC0FF000E770FC0FF000E800F00FF001E
+:1035F0000E810F00FF000E820F00FF000E830F00F0
+:10360000FF000E840F00FF000E850F00FF000E86E6
+:103610000F00FF000E870F00FF000E900F00FF004D
+:103620000E910F00FF000E920F00FF000E930F008F
+:10363000FF000E940F00FF000E950F00FF000E9686
+:103640000F00FF000E970F00FF000EA00F00FF00FD
+:103650000EA10F00FF000EA20F00FF000EA30F002F
+:10366000FF000EA40F00FF000EA50F00FF000EA626
+:103670000F00FF000EA70F00FF000EC00F00FF009D
+:103680000EC10F00FF000EC20F00FF000EC30F009F
+:10369000FF000EC40F00FF000EC50F00FF000EC696
+:1036A0000F00FF000EC70F00FF000ED00F00FF003D
+:1036B0000ED10F00FF000ED20F00FF000ED30F003F
+:1036C000FF000ED40F00FF000ED50F00FF000ED636
+:1036D0000F00FF000ED70F00FF000EE00F00FF00ED
+:1036E0000EE10F00FF000EE20F00FF000EE30F00DF
+:1036F000FF000EE40F00FF000EE50F00FF000EE6D6
+:103700000F00FF000EE70F00FF000E010F00FF008B
+:103710000E020F01FF000E010F01FF000E020F014C
+:10372000FF000E010F02FF000E020F01FF000E014D
+:103730000F03FF000E020F01FF000E010F04FF0038
+:103740000E020F01FF000E010F05FF000E020F0118
+:10375000FF000E010F06FF000E020F01FF000E0119
+:103760000F07FF000E020F01FF000B070A460D00B6
+:103770000C00FF000B070A490D000C00FF000B07AF
+:103780000A450D0F0CFFFF000B070A480D0F0CFF39
+:10379000FF000B070A7B0D040CCCFF000B070A7D12
+:1037A0000D040CCCFF000B070A7C0D000C00FF0081
+:1037B0000B070A7E0D000C00FF000B070A460D00E8
+:1037C0000C00FF000B070A490D000C00FF000B075F
+:1037D0000A470D000C00FF000B070A4A0D000C0001
+:1037E000FF000B070A4C0D000C00FF000B070A4EF0
+:1037F0000D000C00FF000B070A4C0D000C000B071E
+:103800000A4E0D000C000B070A4C0D000C280B078C
+:103810000A4E0D000C280B070A4C0D000C510B072B
+:103820000A4E0D000C510B070A4C0D000C7A0B07C9
+:103830000A4E0D000C7A0B070A4C0D000CA30B0767
+:103840000A4E0D000CA30B070A4C0D000CCC0B0705
+:103850000A4E0D000CCC0B070A4C0D000CF50B07A3
+:103860000A4E0D000CF50B070A4C0D010C1E0B0740
+:103870000A4E0D010C1E0B070A4C0D010C470B07DD
+:103880000A4E0D010C470B070A4C0D010C700B077B
+:103890000A4E0D010C700B070A4C0D010C990B0719
+:1038A0000A4E0D010C990B070A4C0D010CC20B07B7
+:1038B0000A4E0D010CC20B070A4C0D010CEB0B0755
+:1038C0000A4E0D010CEB0B070A4C0D020C140B07F2
+:1038D0000A4E0D020C140B070A4C0D020C3D0B078F
+:1038E0000A4E0D020C3D0B070A4C0D020C660B072D
+:1038F0000A4E0D020C660B070A4C0D020C8F0B07CB
+:103900000A4E0D020C8F0B070A4C0D020CB80B0768
+:103910000A4E0D020CB80B070A4C0D020CE10B0706
+:103920000A4E0D020CE10B070A4C0D030C0A0B07A3
+:103930000A4E0D030C0A0B070A4C0D030C330B0740
+:103940000A4E0D030C330B070A4C0D030C5C0B07DE
+:103950000A4E0D030C5C0B070A4C0D030C850B077C
+:103960000A4E0D030C850B070A4C0D030CAE0B071A
+:103970000A4E0D030CAE0B070A4C0D030CD70B07B8
+:103980000A4E0D030CD70B070A4C0D040C000B0755
+:103990000A4E0D040C000B070A4C0D040C280B07F3
+:1039A0000A4E0D040C280B070A4C0D040C510B0792
+:1039B0000A4E0D040C510B070A4C0D040C7A0B0730
+:1039C0000A4E0D040C7A0B070A4C0D040CA30B07CE
+:1039D0000A4E0D040CA30B070A4C0D040CCC0B076C
+:1039E0000A4E0D040CCC0B070A4C0D040CF50B070A
+:1039F0000A4E0D040CF50B070A4C0D050C1E0B07A7
+:103A00000A4E0D050C1E0B070A4C0D050C470B0743
+:103A10000A4E0D050C470B070A4C0D050C700B07E1
+:103A20000A4E0D050C700B070A4C0D050C990B077F
+:103A30000A4E0D050C990B070A4C0D050CC20B071D
+:103A40000A4E0D050CC20B070A4C0D050CEB0B07BB
+:103A50000A4E0D050CEB0B070A4C0D060C140B0758
+:103A60000A4E0D060C140B070A4C0D060C3D0B07F5
+:103A70000A4E0D060C3D0B070A4C0D060C660B0793
+:103A80000A4E0D060C660B070A4C0D060C8F0B0731
+:103A90000A4E0D060C8F0B070A4C0D060CB80B07CF
+:103AA0000A4E0D060CB80B070A4C0D060CE10B076D
+:103AB0000A4E0D060CE10B070A4C0D070C0A0B070A
+:103AC0000A4E0D070C0A0B070A4C0D070C330B07A7
+:103AD0000A4E0D070C330B070A4C0D070C5C0B0745
+:103AE0000A4E0D070C5C0B070A4C0D070C850B07E3
+:103AF0000A4E0D070C850B070A4C0D070CAE0B0781
+:103B00000A4E0D070CAE0B070A4C0D070CD70B071E
+:103B10000A4E0D070CD70B070A4C0D080C000B07BB
+:103B20000A4E0D080C000B070A4C0D080C280B0759
+:103B30000A4E0D080C280B070A4C0D080C510B07F8
+:103B40000A4E0D080C510B070A4C0D080C7A0B0796
+:103B50000A4E0D080C7A0B070A4C0D080CA30B0734
+:103B60000A4E0D080CA30B070A4C0D080CCC0B07D2
+:103B70000A4E0D080CCC0B070A4C0D080CF50B0770
+:103B80000A4E0D080CF50B070A4C0D090C1E0B070D
+:103B90000A4E0D090C1E0B070A4C0D090C470B07AA
+:103BA0000A4E0D090C470B070A4C0D090C700B0748
+:103BB0000A4E0D090C700B070A4C0D090C990B07E6
+:103BC0000A4E0D090C990B070A4C0D090CC20B0784
+:103BD0000A4E0D090CC20B070A4C0D090CEB0B0722
+:103BE0000A4E0D090CEB0B070A4C0D0A0C140B07BF
+:103BF0000A4E0D0A0C140B070A4C0D0A0C3D0B075C
+:103C00000A4E0D0A0C3D0B070A4C0D0A0C660B07F9
+:103C10000A4E0D0A0C660B070A4C0D0A0C8F0B0797
+:103C20000A4E0D0A0C8F0B070A4C0D0A0CB80B0735
+:103C30000A4E0D0A0CB80B070A4C0D0A0CE10B07D3
+:103C40000A4E0D0A0CE10B070A4C0D0B0C0A0B0770
+:103C50000A4E0D0B0C0A0B070A4C0D0B0C330B070D
+:103C60000A4E0D0B0C330B070A4C0D0B0C5C0B07AB
+:103C70000A4E0D0B0C5C0B070A4C0D0B0C850B0749
+:103C80000A4E0D0B0C850B070A4C0D0B0CAE0B07E7
+:103C90000A4E0D0B0CAE0B070A4C0D0B0CD70B0785
+:103CA0000A4E0D0B0CD70B070A4C0D0C0C000B0722
+:103CB0000A4E0D0C0C000B070A4C0D0C0C280B07C0
+:103CC0000A4E0D0C0C280B070A4C0D0C0C510B075F
+:103CD0000A4E0D0C0C510B070A4C0D0C0C7A0B07FD
+:103CE0000A4E0D0C0C7A0B070A4C0D0C0CA30B079B
+:103CF0000A4E0D0C0CA30B070A4C0D0C0CCC0B0739
+:103D00000A4E0D0C0CCC0B070A4C0D0C0CF50B07D6
+:103D10000A4E0D0C0CF50B070A4C0D0D0C1E0B0773
+:103D20000A4E0D0D0C1E0B070A4C0D0D0C470B0710
+:103D30000A4E0D0D0C470B070A4C0D0D0C700B07AE
+:103D40000A4E0D0D0C700B070A4C0D0D0C990B074C
+:103D50000A4E0D0D0C990B070A4C0D0D0CC20B07EA
+:103D60000A4E0D0D0CC20B070A4C0D0D0CEB0B0788
+:103D70000A4E0D0D0CEB0B070A4C0D0E0C140B0725
+:103D80000A4E0D0E0C140B070A4C0D0E0C3D0B07C2
+:103D90000A4E0D0E0C3D0B070A4C0D0E0C660B0760
+:103DA0000A4E0D0E0C660B070A4C0D0E0C8F0B07FE
+:103DB0000A4E0D0E0C8F0B070A4C0D0E0CB80B079C
+:103DC0000A4E0D0E0CB80B070A4C0D0E0CE10B073A
+:103DD0000A4E0D0E0CE10B070A4C0D0F0C0A0B07D7
+:103DE0000A4E0D0F0C0A0B070A4C0D0F0C330B0774
+:103DF0000A4E0D0F0C330B070A4C0D0F0C5C0B0712
+:103E00000A4E0D0F0C5C0B070A4C0D0F0C850B07AF
+:103E10000A4E0D0F0C850B070A4C0D0F0CAE0B074D
+:103E20000A4E0D0F0CAE0B070A4C0D0F0CD70B07EB
+:103E30000A4E0D0F0CD70B070A4C0D0F0CFF0B078A
+:0A3E40000A4E0D0F0CFF0800FF00F2
+:00000001FF
#include <linux/mount.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
root = d_alloc_root(inode);
if (!root) {
+ iput(inode);
retval = -ENOMEM;
goto release_sb;
}
return 0;
release_sb:
- if (sb) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
- }
+ deactivate_locked_super(sb);
free_stat:
kfree(st);
static void
v9fs_umount_begin(struct super_block *sb)
{
- struct v9fs_session_info *v9ses = sb->s_fs_info;
+ struct v9fs_session_info *v9ses;
+ lock_kernel();
+ v9ses = sb->s_fs_info;
v9fs_session_cancel(v9ses);
+ unlock_kernel();
}
static const struct super_operations v9fs_super_ops = {
kfree(new_opts);
return -EINVAL;
}
- kfree(sb->s_options);
- sb->s_options = new_opts;
+ replace_mount_options(sb, new_opts);
sbi->s_flags = mount_flags;
sbi->s_mode = mode;
return 0;
}
+#ifdef CONFIG_AFS_FSCACHE
/*
* deal with notification that a page was read from the cache
*/
SetPageUptodate(page);
unlock_page(page);
}
+#endif
/*
* AFS read page from file, directory or symlink
struct net_device *dev;
int ret = -ENODEV;
- if (maclen != ETH_ALEN)
- BUG();
+ BUG_ON(maclen != ETH_ALEN);
rtnl_lock();
dev = __dev_getfirstbyhwtype(&init_net, ARPHRD_ETHER);
sb->s_flags = flags;
ret = afs_fill_super(sb, ¶ms);
if (ret < 0) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
goto error;
}
- sb->s_options = new_opts;
+ save_mount_options(sb, new_opts);
sb->s_flags |= MS_ACTIVE;
} else {
_debug("reuse");
- kfree(new_opts);
ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
}
simple_set_mnt(mnt, sb);
afs_put_volume(params.volume);
afs_put_cell(params.cell);
+ kfree(new_opts);
_leave(" = 0 [%p]", sb);
return 0;
{
struct autofs_dirhash *dh = &sbi->dirhash;
struct autofs_dir_ent *ent;
- struct dentry *dentry;
unsigned long timeout = sbi->exp_timeout;
while (1) {
+ struct path path;
+ int umount_ok;
+
if ( list_empty(&dh->expiry_head) || sbi->catatonic )
return NULL; /* No entries */
/* We keep the list sorted by last_usage and want old stuff */
return ent; /* Symlinks are always expirable */
/* Get the dentry for the autofs subdirectory */
- dentry = ent->dentry;
+ path.dentry = ent->dentry;
- if ( !dentry ) {
+ if (!path.dentry) {
/* Should only happen in catatonic mode */
printk("autofs: dentry == NULL but inode range is directory, entry %s\n", ent->name);
autofs_delete_usage(ent);
continue;
}
- if ( !dentry->d_inode ) {
- dput(dentry);
+ if (!path.dentry->d_inode) {
+ dput(path.dentry);
printk("autofs: negative dentry on expiry queue: %s\n",
ent->name);
autofs_delete_usage(ent);
/* Make sure entry is mounted and unused; note that dentry will
point to the mounted-on-top root. */
- if (!S_ISDIR(dentry->d_inode->i_mode)||!d_mountpoint(dentry)) {
+ if (!S_ISDIR(path.dentry->d_inode->i_mode) ||
+ !d_mountpoint(path.dentry)) {
DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
continue;
}
- mntget(mnt);
- dget(dentry);
- if (!follow_down(&mnt, &dentry)) {
- dput(dentry);
- mntput(mnt);
+ path.mnt = mnt;
+ path_get(&path);
+ if (!follow_down(&path.mnt, &path.dentry)) {
+ path_put(&path);
DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
continue;
}
- while (d_mountpoint(dentry) && follow_down(&mnt, &dentry))
+ while (d_mountpoint(path.dentry) &&
+ follow_down(&path.mnt, &path.dentry))
;
- dput(dentry);
+ umount_ok = may_umount(path.mnt);
+ path_put(&path);
- if ( may_umount(mnt) ) {
- mntput(mnt);
+ if (umount_ok) {
DPRINTK(("autofs: signaling expire on %s\n", ent->name));
return ent; /* Expirable! */
}
DPRINTK(("autofs: didn't expire due to may_umount: %s\n", ent->name));
- mntput(mnt);
}
return NULL; /* No expirable entries */
}
* Check a string doesn't overrun the chunk of
* memory we copied from user land.
*/
-static int invalid_str(char *str, void *end)
+static int invalid_str(char *str, size_t size)
{
- while ((void *) str <= end)
- if (!*str++)
- return 0;
+ if (memchr(str, 0, size))
+ return 0;
return -EINVAL;
}
}
if (param->size > sizeof(*param)) {
- err = invalid_str(param->path,
- (void *) ((size_t) param + param->size));
+ err = invalid_str(param->path, param->size - sizeof(*param));
if (err) {
AUTOFS_WARN(
"path string terminator missing for cmd(0x%08x)",
}
path = param->path;
- devid = sbi->sb->s_dev;
+ devid = new_encode_dev(sbi->sb->s_dev);
param->requester.uid = param->requester.gid = -1;
* Otherwise it's an offset mount and we need to check
* if we can umount its mount, if there is one.
*/
- if (!d_mountpoint(dentry))
+ if (!d_mountpoint(dentry)) {
+ status = 0;
goto done;
+ }
}
/* Update the expiry counter if fs is busy */
*/
if (notify == NFY_MOUNT) {
/*
- * If the dentry isn't hashed just go ahead and try the
- * mount again with a new wait (not much else we can do).
- */
- if (!d_unhashed(dentry)) {
- /*
- * But if the dentry is hashed, that means that we
- * got here through the revalidate path. Thus, we
- * need to check if the dentry has been mounted
- * while we waited on the wq_mutex. If it has,
- * simply return success.
- */
- if (d_mountpoint(dentry))
- return 0;
- }
+ * If the dentry was successfully mounted while we slept
+ * on the wait queue mutex we can return success. If it
+ * isn't mounted (doesn't have submounts for the case of
+ * a multi-mount with no mount at it's base) we can
+ * continue on and create a new request.
+ */
+ if (have_submounts(dentry))
+ return 0;
}
return 1;
*/
#include <linux/fs.h>
+#include <asm/page.h> /* for PAGE_SIZE */
#include "befs.h"
#include "super.h"
prstatus->pr_sigpend = p->pending.signal.sig[0];
prstatus->pr_sighold = p->blocked.sig[0];
prstatus->pr_pid = task_pid_vnr(p);
- prstatus->pr_ppid = task_pid_vnr(p->parent);
+ prstatus->pr_ppid = task_pid_vnr(p->real_parent);
prstatus->pr_pgrp = task_pgrp_vnr(p);
prstatus->pr_sid = task_session_vnr(p);
if (thread_group_leader(p)) {
psinfo->pr_psargs[len] = 0;
psinfo->pr_pid = task_pid_vnr(p);
- psinfo->pr_ppid = task_pid_vnr(p->parent);
+ psinfo->pr_ppid = task_pid_vnr(p->real_parent);
psinfo->pr_pgrp = task_pgrp_vnr(p);
psinfo->pr_sid = task_session_vnr(p);
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <asm/cacheflush.h>
+#include <asm/page.h>
/****************************************************************************/
#define DBG_FLT(a...)
#endif
+/*
+ * User data (stack, data section and bss) needs to be aligned
+ * for the same reasons as SLAB memory is, and to the same amount.
+ * Avoid duplicating architecture specific code by using the same
+ * macro as with SLAB allocation:
+ */
+#ifdef ARCH_SLAB_MINALIGN
+#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
+#else
+#define FLAT_DATA_ALIGN (sizeof(void *))
+#endif
+
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
int envc = bprm->envc;
char uninitialized_var(dummy);
- sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p);
+ sp = (unsigned long *)p;
+ sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+ argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ envp = argv + (argc + 1);
- sp -= envc+1;
- envp = sp;
- sp -= argc+1;
- argv = sp;
-
- flat_stack_align(sp);
if (flat_argvp_envp_on_stack()) {
- --sp; put_user((unsigned long) envp, sp);
- --sp; put_user((unsigned long) argv, sp);
+ put_user((unsigned long) envp, sp + 2);
+ put_user((unsigned long) argv, sp + 1);
}
- put_user(argc,--sp);
+ put_user(argc, sp);
current->mm->arg_start = (unsigned long) p;
while (argc-->0) {
put_user((unsigned long) p, argv++);
ret = realdatastart;
goto err;
}
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
(int)(data_len + bss_len + stack_len), (int)datapos);
}
realdatastart = textpos + ntohl(hdr->data_start);
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
- reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
- MAX_SHARED_LIBS * sizeof(unsigned long));
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
memp = textpos;
memp_size = len;
#ifdef CONFIG_BINFMT_ZFLAT
stack_len = TOP_OF_ARGS - bprm->p; /* the strings */
stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-
+ stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
if (res > (unsigned long)-4096)
{
struct bio_vec *bvl;
- /*
- * If 'bs' is given, lookup the pool and do the mempool alloc.
- * If not, this is a bio_kmalloc() allocation and just do a
- * kzalloc() for the exact number of vecs right away.
- */
- if (!bs)
- bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask);
-
/*
* see comment near bvec_array define!
*/
mempool_free(p, bs->bio_pool);
}
-/*
- * default destructor for a bio allocated with bio_alloc_bioset()
- */
-static void bio_fs_destructor(struct bio *bio)
-{
- bio_free(bio, fs_bio_set);
-}
-
-static void bio_kmalloc_destructor(struct bio *bio)
-{
- if (bio_has_allocated_vec(bio))
- kfree(bio->bi_io_vec);
- kfree(bio);
-}
-
void bio_init(struct bio *bio)
{
memset(bio, 0, sizeof(*bio));
**/
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
+ unsigned long idx = BIO_POOL_NONE;
struct bio_vec *bvl = NULL;
- struct bio *bio = NULL;
- unsigned long idx = 0;
- void *p = NULL;
-
- if (bs) {
- p = mempool_alloc(bs->bio_pool, gfp_mask);
- if (!p)
- goto err;
- bio = p + bs->front_pad;
- } else {
- bio = kmalloc(sizeof(*bio), gfp_mask);
- if (!bio)
- goto err;
- }
+ struct bio *bio;
+ void *p;
+
+ p = mempool_alloc(bs->bio_pool, gfp_mask);
+ if (unlikely(!p))
+ return NULL;
+ bio = p + bs->front_pad;
bio_init(bio);
nr_iovecs = bvec_nr_vecs(idx);
}
+out_set:
bio->bi_flags |= idx << BIO_POOL_OFFSET;
bio->bi_max_vecs = nr_iovecs;
-out_set:
bio->bi_io_vec = bvl;
-
return bio;
err_free:
- if (bs)
- mempool_free(p, bs->bio_pool);
- else
- kfree(bio);
-err:
+ mempool_free(p, bs->bio_pool);
return NULL;
}
+static void bio_fs_destructor(struct bio *bio)
+{
+ bio_free(bio, fs_bio_set);
+}
+
+/**
+ * bio_alloc - allocate a new bio, memory pool backed
+ * @gfp_mask: allocation mask to use
+ * @nr_iovecs: number of iovecs
+ *
+ * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask
+ * contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ *
+ * RETURNS:
+ * Pointer to new bio on success, NULL on failure.
+ */
struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
{
struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
return bio;
}
-/*
- * Like bio_alloc(), but doesn't use a mempool backing. This means that
- * it CAN fail, but while bio_alloc() can only be used for allocations
- * that have a short (finite) life span, bio_kmalloc() should be used
- * for more permanent bio allocations (like allocating some bio's for
- * initalization or setup purposes).
- */
+static void bio_kmalloc_destructor(struct bio *bio)
+{
+ if (bio_integrity(bio))
+ bio_integrity_free(bio);
+ kfree(bio);
+}
+
+/**
+ * bio_alloc - allocate a bio for I/O
+ * @gfp_mask: the GFP_ mask given to the slab allocator
+ * @nr_iovecs: number of iovecs to pre-allocate
+ *
+ * Description:
+ * bio_alloc will allocate a bio and associated bio_vec array that can hold
+ * at least @nr_iovecs entries. Allocations will be done from the
+ * fs_bio_set. Also see @bio_alloc_bioset.
+ *
+ * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ * a bio. This is due to the mempool guarantees. To make this work, callers
+ * must never allocate more than 1 bio at the time from this pool. Callers
+ * that need to allocate more than 1 bio must always submit the previously
+ * allocate bio for IO before attempting to allocate a new one. Failure to
+ * do so can cause livelocks under memory pressure.
+ *
+ **/
struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
{
- struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL);
+ struct bio *bio;
- if (bio)
- bio->bi_destructor = bio_kmalloc_destructor;
+ bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
+ gfp_mask);
+ if (unlikely(!bio))
+ return NULL;
+
+ bio_init(bio);
+ bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET;
+ bio->bi_max_vecs = nr_iovecs;
+ bio->bi_io_vec = bio->bi_inline_vecs;
+ bio->bi_destructor = bio_kmalloc_destructor;
return bio;
}
len += iov[i].iov_len;
}
+ if (offset)
+ nr_pages++;
+
bmd = bio_alloc_map_data(nr_pages, iov_count, gfp_mask);
if (!bmd)
return ERR_PTR(-ENOMEM);
ret = -ENOMEM;
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
goto out_bmd;
if (!nr_pages)
return ERR_PTR(-EINVAL);
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
int offset, i;
struct bio *bio;
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
-ifneq ($(KERNELRELEASE),)
-# kbuild part of makefile
obj-$(CONFIG_BTRFS_FS) := btrfs.o
-btrfs-y := super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
+
+btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
file-item.o inode-item.o inode-map.o disk-io.o \
transaction.o inode.o file.o tree-defrag.o \
extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \
compression.o delayed-ref.o
-else
-
-# Normal Makefile
-
-KERNELDIR := /lib/modules/`uname -r`/build
-all:
- $(MAKE) -C $(KERNELDIR) M=`pwd` CONFIG_BTRFS_FS=m modules
-
-modules_install:
- $(MAKE) -C $(KERNELDIR) M=`pwd` modules_install
-clean:
- $(MAKE) -C $(KERNELDIR) M=`pwd` clean
-
-endif
return ERR_PTR(-EINVAL);
}
+ /* Handle the cached NULL acl case without locking */
+ acl = ACCESS_ONCE(*p_acl);
+ if (!acl)
+ return acl;
+
spin_lock(&inode->i_lock);
- if (*p_acl != BTRFS_ACL_NOT_CACHED)
- acl = posix_acl_dup(*p_acl);
+ acl = *p_acl;
+ if (acl != BTRFS_ACL_NOT_CACHED)
+ acl = posix_acl_dup(acl);
spin_unlock(&inode->i_lock);
- if (acl)
+ if (acl != BTRFS_ACL_NOT_CACHED)
return acl;
-
size = __btrfs_getxattr(inode, name, "", 0);
if (size > 0) {
value = kzalloc(size, GFP_NOFS);
btrfs_update_cached_acl(inode, p_acl, acl);
}
kfree(value);
- } else if (size == -ENOENT) {
+ } else if (size == -ENOENT || size == -ENODATA || size == 0) {
+ /* FIXME, who returns -ENOENT? I think nobody */
acl = NULL;
btrfs_update_cached_acl(inode, p_acl, acl);
+ } else {
+ acl = ERR_PTR(-EIO);
}
return acl;
#define WORK_QUEUED_BIT 0
#define WORK_DONE_BIT 1
#define WORK_ORDER_DONE_BIT 2
+#define WORK_HIGH_PRIO_BIT 3
/*
* container for the kthread task pointer and the list of pending work
/* list of struct btrfs_work that are waiting for service */
struct list_head pending;
+ struct list_head prio_pending;
/* list of worker threads from struct btrfs_workers */
struct list_head worker_list;
spin_lock_irqsave(&workers->lock, flags);
- while (!list_empty(&workers->order_list)) {
- work = list_entry(workers->order_list.next,
- struct btrfs_work, order_list);
-
+ while (1) {
+ if (!list_empty(&workers->prio_order_list)) {
+ work = list_entry(workers->prio_order_list.next,
+ struct btrfs_work, order_list);
+ } else if (!list_empty(&workers->order_list)) {
+ work = list_entry(workers->order_list.next,
+ struct btrfs_work, order_list);
+ } else {
+ break;
+ }
if (!test_bit(WORK_DONE_BIT, &work->flags))
break;
do {
spin_lock_irq(&worker->lock);
again_locked:
- while (!list_empty(&worker->pending)) {
- cur = worker->pending.next;
+ while (1) {
+ if (!list_empty(&worker->prio_pending))
+ cur = worker->prio_pending.next;
+ else if (!list_empty(&worker->pending))
+ cur = worker->pending.next;
+ else
+ break;
+
work = list_entry(cur, struct btrfs_work, list);
list_del(&work->list);
clear_bit(WORK_QUEUED_BIT, &work->flags);
spin_lock_irq(&worker->lock);
check_idle_worker(worker);
-
}
if (freezing(current)) {
worker->working = 0;
* jump_in?
*/
smp_mb();
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
continue;
/*
*/
schedule_timeout(1);
smp_mb();
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
continue;
if (kthread_should_stop())
/* still no more work?, sleep for real */
spin_lock_irq(&worker->lock);
set_current_state(TASK_INTERRUPTIBLE);
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
goto again_locked;
/*
INIT_LIST_HEAD(&workers->worker_list);
INIT_LIST_HEAD(&workers->idle_list);
INIT_LIST_HEAD(&workers->order_list);
+ INIT_LIST_HEAD(&workers->prio_order_list);
spin_lock_init(&workers->lock);
workers->max_workers = max;
workers->idle_thresh = 32;
}
INIT_LIST_HEAD(&worker->pending);
+ INIT_LIST_HEAD(&worker->prio_pending);
INIT_LIST_HEAD(&worker->worker_list);
spin_lock_init(&worker->lock);
atomic_set(&worker->num_pending, 0);
goto out;
spin_lock_irqsave(&worker->lock, flags);
- list_add_tail(&work->list, &worker->pending);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+ list_add_tail(&work->list, &worker->prio_pending);
+ else
+ list_add_tail(&work->list, &worker->pending);
atomic_inc(&worker->num_pending);
/* by definition we're busy, take ourselves off the idle
return 0;
}
+void btrfs_set_work_high_prio(struct btrfs_work *work)
+{
+ set_bit(WORK_HIGH_PRIO_BIT, &work->flags);
+}
+
/*
* places a struct btrfs_work into the pending queue of one of the kthreads
*/
worker = find_worker(workers);
if (workers->ordered) {
spin_lock_irqsave(&workers->lock, flags);
- list_add_tail(&work->order_list, &workers->order_list);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) {
+ list_add_tail(&work->order_list,
+ &workers->prio_order_list);
+ } else {
+ list_add_tail(&work->order_list, &workers->order_list);
+ }
spin_unlock_irqrestore(&workers->lock, flags);
} else {
INIT_LIST_HEAD(&work->order_list);
spin_lock_irqsave(&worker->lock, flags);
- list_add_tail(&work->list, &worker->pending);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+ list_add_tail(&work->list, &worker->prio_pending);
+ else
+ list_add_tail(&work->list, &worker->pending);
atomic_inc(&worker->num_pending);
check_busy_worker(worker);
* of work items waiting for completion
*/
struct list_head order_list;
+ struct list_head prio_order_list;
/* lock for finding the next worker thread to queue on */
spinlock_t lock;
int btrfs_stop_workers(struct btrfs_workers *workers);
void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max);
int btrfs_requeue_work(struct btrfs_work *work);
+void btrfs_set_work_high_prio(struct btrfs_work *work);
#endif
int ret = 0;
int blocksize;
- parent = path->nodes[level - 1];
+ parent = path->nodes[level + 1];
if (!parent)
return 0;
nritems = btrfs_header_nritems(parent);
- slot = path->slots[level];
+ slot = path->slots[level + 1];
blocksize = btrfs_level_size(root, level);
if (slot > 0) {
block1 = 0;
free_extent_buffer(eb);
}
- if (slot < nritems) {
+ if (slot + 1 < nritems) {
block2 = btrfs_node_blockptr(parent, slot + 1);
gen = btrfs_node_ptr_generation(parent, slot + 1);
eb = btrfs_find_tree_block(root, block2, blocksize);
}
if (block1 || block2) {
ret = -EAGAIN;
+
+ /* release the whole path */
btrfs_release_path(root, path);
+
+ /* read the blocks */
if (block1)
readahead_tree_block(root, block1, blocksize, 0);
if (block2)
eb = read_tree_block(root, block1, blocksize, 0);
free_extent_buffer(eb);
}
- if (block1) {
+ if (block2) {
eb = read_tree_block(root, block2, blocksize, 0);
free_extent_buffer(eb);
}
u32 blocksize;
struct extent_buffer *b = *eb_ret;
struct extent_buffer *tmp;
+ int ret;
blocknr = btrfs_node_blockptr(b, slot);
gen = btrfs_node_ptr_generation(b, slot);
tmp = btrfs_find_tree_block(root, blocknr, blocksize);
if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+ /*
+ * we found an up to date block without sleeping, return
+ * right away
+ */
*eb_ret = tmp;
return 0;
}
/*
* reduce lock contention at high levels
* of the btree by dropping locks before
- * we read.
+ * we read. Don't release the lock on the current
+ * level because we need to walk this node to figure
+ * out which blocks to read.
*/
- btrfs_release_path(NULL, p);
+ btrfs_unlock_up_safe(p, level + 1);
+ btrfs_set_path_blocking(p);
+
if (tmp)
free_extent_buffer(tmp);
if (p->reada)
reada_for_search(root, p, level, slot, key->objectid);
+ btrfs_release_path(NULL, p);
+
+ ret = -EAGAIN;
tmp = read_tree_block(root, blocknr, blocksize, gen);
- if (tmp)
+ if (tmp) {
+ /*
+ * If the read above didn't mark this buffer up to date,
+ * it will never end up being up to date. Set ret to EIO now
+ * and give up so that our caller doesn't loop forever
+ * on our EAGAINs.
+ */
+ if (!btrfs_buffer_uptodate(tmp, 0))
+ ret = -EIO;
free_extent_buffer(tmp);
- return -EAGAIN;
+ }
+ return ret;
}
/*
if (ret == -EAGAIN)
goto again;
+ if (ret == -EIO)
+ goto done;
+
if (!p->skip_locking) {
int lret;
*/
if (!p->leave_spinning)
btrfs_set_path_blocking(p);
+ if (ret < 0)
+ btrfs_release_path(root, p);
return ret;
}
if (ret == -EAGAIN)
goto again;
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ goto done;
+ }
+
if (!path->skip_locking) {
ret = btrfs_try_spin_lock(next);
if (!ret) {
if (ret == -EAGAIN)
goto again;
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ goto done;
+ }
+
if (!path->skip_locking) {
btrfs_assert_tree_locked(path->nodes[level]);
ret = btrfs_try_spin_lock(next);
u64 metadata_alloc_profile;
u64 system_alloc_profile;
+ unsigned data_chunk_allocations;
+ unsigned metadata_ratio;
+
void *bdev_holder;
};
extern struct file_operations btrfs_file_operations;
int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
- u64 start, u64 end, u64 inline_limit, u64 *hint_block);
+ u64 start, u64 end, u64 locked_end,
+ u64 inline_limit, u64 *hint_block);
int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 start, u64 end);
memcpy(&found, result, csum_size);
read_extent_buffer(buf, &val, 0, csum_size);
- printk(KERN_INFO "btrfs: %s checksum verify failed "
- "on %llu wanted %X found %X level %d\n",
- root->fs_info->sb->s_id,
- buf->start, val, found, btrfs_header_level(buf));
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs: %s checksum verify "
+ "failed on %llu wanted %X found %X "
+ "level %d\n",
+ root->fs_info->sb->s_id,
+ (unsigned long long)buf->start, val, found,
+ btrfs_header_level(buf));
+ }
if (result != (char *)&inline_result)
kfree(result);
return 1;
ret = 0;
goto out;
}
- printk("parent transid verify failed on %llu wanted %llu found %llu\n",
- (unsigned long long)eb->start,
- (unsigned long long)parent_transid,
- (unsigned long long)btrfs_header_generation(eb));
+ if (printk_ratelimit()) {
+ printk("parent transid verify failed on %llu wanted %llu "
+ "found %llu\n",
+ (unsigned long long)eb->start,
+ (unsigned long long)parent_transid,
+ (unsigned long long)btrfs_header_generation(eb));
+ }
ret = 1;
clear_extent_buffer_uptodate(io_tree, eb);
out:
found_start = btrfs_header_bytenr(eb);
if (found_start != start) {
- printk(KERN_INFO "btrfs bad tree block start %llu %llu\n",
- (unsigned long long)found_start,
- (unsigned long long)eb->start);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs bad tree block start "
+ "%llu %llu\n",
+ (unsigned long long)found_start,
+ (unsigned long long)eb->start);
+ }
ret = -EIO;
goto err;
}
goto err;
}
if (check_tree_block_fsid(root, eb)) {
- printk(KERN_INFO "btrfs bad fsid on block %llu\n",
- (unsigned long long)eb->start);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs bad fsid on block %llu\n",
+ (unsigned long long)eb->start);
+ }
ret = -EIO;
goto err;
}
async->bio_flags = bio_flags;
atomic_inc(&fs_info->nr_async_submits);
+
+ if (rw & (1 << BIO_RW_SYNCIO))
+ btrfs_set_work_high_prio(&async->work);
+
btrfs_queue_worker(&fs_info->workers, &async->work);
-#if 0
- int limit = btrfs_async_submit_limit(fs_info);
- if (atomic_read(&fs_info->nr_async_submits) > limit) {
- wait_event_timeout(fs_info->async_submit_wait,
- (atomic_read(&fs_info->nr_async_submits) < limit),
- HZ/10);
- wait_event_timeout(fs_info->async_submit_wait,
- (atomic_read(&fs_info->nr_async_bios) < limit),
- HZ/10);
- }
-#endif
while (atomic_read(&fs_info->async_submit_draining) &&
atomic_read(&fs_info->nr_async_submits)) {
wait_event(fs_info->async_submit_wait,
return btrfs_map_bio(BTRFS_I(inode)->root, rw, bio,
mirror_num, 0);
}
+
/*
* kthread helpers are used to submit writes so that checksumming
* can happen in parallel across all CPUs
}
}
-#if 0
-static int btree_writepage(struct page *page, struct writeback_control *wbc)
-{
- struct buffer_head *bh;
- struct btrfs_root *root = BTRFS_I(page->mapping->host)->root;
- struct buffer_head *head;
- if (!page_has_buffers(page)) {
- create_empty_buffers(page, root->fs_info->sb->s_blocksize,
- (1 << BH_Dirty)|(1 << BH_Uptodate));
- }
- head = page_buffers(page);
- bh = head;
- do {
- if (buffer_dirty(bh))
- csum_tree_block(root, bh, 0);
- bh = bh->b_this_page;
- } while (bh != head);
- return block_write_full_page(page, btree_get_block, wbc);
-}
-#endif
-
static struct address_space_operations btree_aops = {
.readpage = btree_readpage,
.writepage = btree_writepage,
if (ret == 0)
set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
- else
- WARN_ON(1);
return buf;
}
int ret = 0;
struct btrfs_device *device;
struct backing_dev_info *bdi;
-#if 0
- if ((bdi_bits & (1 << BDI_write_congested)) &&
- btrfs_congested_async(info, 0))
- return 1;
-#endif
+
list_for_each_entry(device, &info->fs_devices->devices, dev_list) {
if (!device->bdev)
continue;
fs_info->btree_inode = new_inode(sb);
fs_info->btree_inode->i_ino = 1;
fs_info->btree_inode->i_nlink = 1;
+ fs_info->metadata_ratio = 8;
fs_info->thread_pool_size = min_t(unsigned long,
num_online_cpus() + 2, 8);
if (features) {
printk(KERN_ERR "BTRFS: couldn't mount because of "
"unsupported optional features (%Lx).\n",
- features);
+ (unsigned long long)features);
err = -EINVAL;
goto fail_iput;
}
if (!(sb->s_flags & MS_RDONLY) && features) {
printk(KERN_ERR "BTRFS: couldn't mount RDWR because of "
"unsupported option features (%Lx).\n",
- features);
+ (unsigned long long)features);
err = -EINVAL;
goto fail_iput;
}
device->barriers = 0;
get_bh(bh);
lock_buffer(bh);
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
}
} else {
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
}
if (!ret && wait) {
if (fs_info->delalloc_bytes) {
printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
- fs_info->delalloc_bytes);
+ (unsigned long long)fs_info->delalloc_bytes);
}
if (fs_info->total_ref_cache_size) {
printk(KERN_INFO "btrfs: at umount reference cache size %llu\n",
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
-#if 0
- while (!list_empty(&fs_info->hashers)) {
- struct btrfs_hasher *hasher;
- hasher = list_entry(fs_info->hashers.next, struct btrfs_hasher,
- hashers);
- list_del(&hasher->hashers);
- crypto_free_hash(&fs_info->hash_tfm);
- kfree(hasher);
- }
-#endif
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
}
/*
- * return the block group that contains teh given bytenr
+ * return the block group that contains the given bytenr
*/
struct btrfs_block_group_cache *btrfs_lookup_block_group(
struct btrfs_fs_info *info,
printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
", %llu bytes_used, %llu bytes_reserved, "
"%llu bytes_pinned, %llu bytes_readonly, %llu may use"
- "%llu total\n", bytes, data_sinfo->bytes_delalloc,
- data_sinfo->bytes_used, data_sinfo->bytes_reserved,
- data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
- data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+ "%llu total\n", (unsigned long long)bytes,
+ (unsigned long long)data_sinfo->bytes_delalloc,
+ (unsigned long long)data_sinfo->bytes_used,
+ (unsigned long long)data_sinfo->bytes_reserved,
+ (unsigned long long)data_sinfo->bytes_pinned,
+ (unsigned long long)data_sinfo->bytes_readonly,
+ (unsigned long long)data_sinfo->bytes_may_use,
+ (unsigned long long)data_sinfo->total_bytes);
return -ENOSPC;
}
data_sinfo->bytes_may_use += bytes;
spin_unlock(&info->lock);
}
+static void force_metadata_allocation(struct btrfs_fs_info *info)
+{
+ struct list_head *head = &info->space_info;
+ struct btrfs_space_info *found;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(found, head, list) {
+ if (found->flags & BTRFS_BLOCK_GROUP_METADATA)
+ found->force_alloc = 1;
+ }
+ rcu_read_unlock();
+}
+
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force)
{
struct btrfs_space_info *space_info;
+ struct btrfs_fs_info *fs_info = extent_root->fs_info;
u64 thresh;
int ret = 0;
- mutex_lock(&extent_root->fs_info->chunk_mutex);
+ mutex_lock(&fs_info->chunk_mutex);
flags = btrfs_reduce_alloc_profile(extent_root, flags);
}
spin_unlock(&space_info->lock);
+ /*
+ * if we're doing a data chunk, go ahead and make sure that
+ * we keep a reasonable number of metadata chunks allocated in the
+ * FS as well.
+ */
+ if (flags & BTRFS_BLOCK_GROUP_DATA) {
+ fs_info->data_chunk_allocations++;
+ if (!(fs_info->data_chunk_allocations %
+ fs_info->metadata_ratio))
+ force_metadata_allocation(fs_info);
+ }
+
ret = btrfs_alloc_chunk(trans, extent_root, flags);
if (ret)
space_info->full = 1;
search_start);
if (block_group && block_group_bits(block_group, data)) {
down_read(&space_info->groups_sem);
- goto have_block_group;
+ if (list_empty(&block_group->list) ||
+ block_group->ro) {
+ /*
+ * someone is removing this block group,
+ * we can't jump into the have_block_group
+ * target because our list pointers are not
+ * valid
+ */
+ btrfs_put_block_group(block_group);
+ up_read(&space_info->groups_sem);
+ } else
+ goto have_block_group;
} else if (block_group) {
btrfs_put_block_group(block_group);
}
* people trying to start a new cluster
*/
spin_lock(&last_ptr->refill_lock);
+ if (last_ptr->block_group &&
+ (last_ptr->block_group->ro ||
+ !block_group_bits(last_ptr->block_group, data))) {
+ offset = 0;
+ goto refill_cluster;
+ }
+
offset = btrfs_alloc_from_cluster(block_group, last_ptr,
num_bytes, search_start);
if (offset) {
last_ptr_loop = 1;
search_start = block_group->key.objectid;
+ /*
+ * we know this block group is properly
+ * in the list because
+ * btrfs_remove_block_group, drops the
+ * cluster before it removes the block
+ * group from the list
+ */
goto have_block_group;
}
spin_unlock(&last_ptr->lock);
-
+refill_cluster:
/*
* this cluster didn't work out, free it and
* start over
info->bytes_pinned - info->bytes_reserved),
(info->full) ? "" : "not ");
printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
- " may_use=%llu, used=%llu\n", info->total_bytes,
- info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
- info->bytes_used);
+ " may_use=%llu, used=%llu\n",
+ (unsigned long long)info->total_bytes,
+ (unsigned long long)info->bytes_pinned,
+ (unsigned long long)info->bytes_delalloc,
+ (unsigned long long)info->bytes_may_use,
+ (unsigned long long)info->bytes_used);
down_read(&info->groups_sem);
list_for_each_entry(cache, &info->block_groups, list) {
{
struct btrfs_path *path;
struct btrfs_block_group_cache *block_group;
+ struct btrfs_free_cluster *cluster;
struct btrfs_key key;
int ret;
memcpy(&key, &block_group->key, sizeof(key));
+ /* make sure this block group isn't part of an allocation cluster */
+ cluster = &root->fs_info->data_alloc_cluster;
+ spin_lock(&cluster->refill_lock);
+ btrfs_return_cluster_to_free_space(block_group, cluster);
+ spin_unlock(&cluster->refill_lock);
+
+ /*
+ * make sure this block group isn't part of a metadata
+ * allocation cluster
+ */
+ cluster = &root->fs_info->meta_alloc_cluster;
+ spin_lock(&cluster->refill_lock);
+ btrfs_return_cluster_to_free_space(block_group, cluster);
+ spin_unlock(&cluster->refill_lock);
+
path = btrfs_alloc_path();
BUG_ON(!path);
spin_unlock(&root->fs_info->block_group_cache_lock);
btrfs_remove_free_space_cache(block_group);
down_write(&block_group->space_info->groups_sem);
- list_del(&block_group->list);
+ /*
+ * we must use list_del_init so people can check to see if they
+ * are still on the list after taking the semaphore
+ */
+ list_del_init(&block_group->list);
up_write(&block_group->space_info->groups_sem);
spin_lock(&block_group->space_info->lock);
#include "ctree.h"
#include "btrfs_inode.h"
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *, struct kmem_cache *,
- unsigned long));
-
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
/* tells writepage not to lock the state bits for this range
* it still does the unlocking
*/
- int extent_locked;
+ unsigned int extent_locked:1;
+
+ /* tells the submit_bio code to use a WRITE_SYNC */
+ unsigned int sync_io:1;
};
int __init extent_io_init(void)
{
- extent_state_cache = btrfs_cache_create("extent_state",
- sizeof(struct extent_state), 0,
- NULL);
+ extent_state_cache = kmem_cache_create("extent_state",
+ sizeof(struct extent_state), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_state_cache)
return -ENOMEM;
- extent_buffer_cache = btrfs_cache_create("extent_buffers",
- sizeof(struct extent_buffer), 0,
- NULL);
+ extent_buffer_cache = kmem_cache_create("extent_buffers",
+ sizeof(struct extent_buffer), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_buffer_cache)
goto free_state_cache;
return 0;
return total_bytes;
}
-#if 0
-/*
- * helper function to lock both pages and extents in the tree.
- * pages must be locked first.
- */
-static int lock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
- unsigned long index = start >> PAGE_CACHE_SHIFT;
- unsigned long end_index = end >> PAGE_CACHE_SHIFT;
- struct page *page;
- int err;
-
- while (index <= end_index) {
- page = grab_cache_page(tree->mapping, index);
- if (!page) {
- err = -ENOMEM;
- goto failed;
- }
- if (IS_ERR(page)) {
- err = PTR_ERR(page);
- goto failed;
- }
- index++;
- }
- lock_extent(tree, start, end, GFP_NOFS);
- return 0;
-
-failed:
- /*
- * we failed above in getting the page at 'index', so we undo here
- * up to but not including the page at 'index'
- */
- end_index = index;
- index = start >> PAGE_CACHE_SHIFT;
- while (index < end_index) {
- page = find_get_page(tree->mapping, index);
- unlock_page(page);
- page_cache_release(page);
- index++;
- }
- return err;
-}
-
-/*
- * helper function to unlock both pages and extents in the tree.
- */
-static int unlock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
- unsigned long index = start >> PAGE_CACHE_SHIFT;
- unsigned long end_index = end >> PAGE_CACHE_SHIFT;
- struct page *page;
-
- while (index <= end_index) {
- page = find_get_page(tree->mapping, index);
- unlock_page(page);
- page_cache_release(page);
- index++;
- }
- unlock_extent(tree, start, end, GFP_NOFS);
- return 0;
-}
-#endif
-
/*
* set the private field for a given byte offset in the tree. If there isn't
* an extent_state there already, this does nothing.
return ret;
}
+static noinline void update_nr_written(struct page *page,
+ struct writeback_control *wbc,
+ unsigned long nr_written)
+{
+ wbc->nr_to_write -= nr_written;
+ if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
+ wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
+ page->mapping->writeback_index = page->index + nr_written;
+}
+
/*
* the writepage semantics are similar to regular writepage. extent
* records are inserted to lock ranges in the tree, and as dirty areas
u64 delalloc_end;
int page_started;
int compressed;
+ int write_flags;
unsigned long nr_written = 0;
+ if (wbc->sync_mode == WB_SYNC_ALL)
+ write_flags = WRITE_SYNC_PLUG;
+ else
+ write_flags = WRITE;
+
WARN_ON(!PageLocked(page));
pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
if (page->index > end_index ||
delalloc_end = 0;
page_started = 0;
if (!epd->extent_locked) {
+ /*
+ * make sure the wbc mapping index is at least updated
+ * to this page.
+ */
+ update_nr_written(page, wbc, 0);
+
while (delalloc_end < page_end) {
nr_delalloc = find_lock_delalloc_range(inode, tree,
page,
*/
if (page_started) {
ret = 0;
- goto update_nr_written;
+ /*
+ * we've unlocked the page, so we can't update
+ * the mapping's writeback index, just update
+ * nr_to_write.
+ */
+ wbc->nr_to_write -= nr_written;
+ goto done_unlocked;
}
}
lock_extent(tree, start, page_end, GFP_NOFS);
if (ret == -EAGAIN) {
unlock_extent(tree, start, page_end, GFP_NOFS);
redirty_page_for_writepage(wbc, page);
+ update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 0;
- goto update_nr_written;
+ goto done_unlocked;
}
}
- nr_written++;
+ /*
+ * we don't want to touch the inode after unlocking the page,
+ * so we update the mapping writeback index now
+ */
+ update_nr_written(page, wbc, nr_written + 1);
end = page_end;
if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0))
(unsigned long long)end);
}
- ret = submit_extent_page(WRITE, tree, page, sector,
- iosize, pg_offset, bdev,
- &epd->bio, max_nr,
+ ret = submit_extent_page(write_flags, tree, page,
+ sector, iosize, pg_offset,
+ bdev, &epd->bio, max_nr,
end_bio_extent_writepage,
0, 0, 0);
if (ret)
unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
unlock_page(page);
-update_nr_written:
- wbc->nr_to_write -= nr_written;
- if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
- wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
- page->mapping->writeback_index = page->index + nr_written;
+done_unlocked:
+
return 0;
}
return ret;
}
-static noinline void flush_write_bio(void *data)
+static void flush_epd_write_bio(struct extent_page_data *epd)
{
- struct extent_page_data *epd = data;
if (epd->bio) {
- submit_one_bio(WRITE, epd->bio, 0, 0);
+ if (epd->sync_io)
+ submit_one_bio(WRITE_SYNC, epd->bio, 0, 0);
+ else
+ submit_one_bio(WRITE, epd->bio, 0, 0);
epd->bio = NULL;
}
}
+static noinline void flush_write_bio(void *data)
+{
+ struct extent_page_data *epd = data;
+ flush_epd_write_bio(epd);
+}
+
int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
get_extent_t *get_extent,
struct writeback_control *wbc)
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
+ .sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
.bdi = wbc->bdi,
- .sync_mode = WB_SYNC_NONE,
+ .sync_mode = wbc->sync_mode,
.older_than_this = NULL,
.nr_to_write = 64,
.range_start = page_offset(page) + PAGE_CACHE_SIZE,
.range_end = (loff_t)-1,
};
-
ret = __extent_writepage(page, wbc, &epd);
extent_write_cache_pages(tree, mapping, &wbc_writepages,
__extent_writepage, &epd, flush_write_bio);
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
.tree = tree,
.get_extent = get_extent,
.extent_locked = 1,
+ .sync_io = mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
.bdi = inode->i_mapping->backing_dev_info,
start += PAGE_CACHE_SIZE;
}
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
+ .sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
ret = extent_write_cache_pages(tree, mapping, wbc,
__extent_writepage, &epd,
flush_write_bio);
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
#include <linux/hardirq.h>
#include "extent_map.h"
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *, struct kmem_cache *,
- unsigned long));
static struct kmem_cache *extent_map_cache;
int __init extent_map_init(void)
{
- extent_map_cache = btrfs_cache_create("extent_map",
- sizeof(struct extent_map), 0,
- NULL);
+ extent_map_cache = kmem_cache_create("extent_map",
+ sizeof(struct extent_map), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_map_cache)
return -ENOMEM;
return 0;
tree->map.rb_node = NULL;
spin_lock_init(&tree->lock);
}
-EXPORT_SYMBOL(extent_map_tree_init);
/**
* alloc_extent_map - allocate new extent map structure
atomic_set(&em->refs, 1);
return em;
}
-EXPORT_SYMBOL(alloc_extent_map);
/**
* free_extent_map - drop reference count of an extent_map
kmem_cache_free(extent_map_cache, em);
}
}
-EXPORT_SYMBOL(free_extent_map);
static struct rb_node *tree_insert(struct rb_root *root, u64 offset,
struct rb_node *node)
out:
return ret;
}
-EXPORT_SYMBOL(add_extent_mapping);
/* simple helper to do math around the end of an extent, handling wrap */
static u64 range_end(u64 start, u64 len)
out:
return em;
}
-EXPORT_SYMBOL(lookup_extent_mapping);
/**
* remove_extent_mapping - removes an extent_map from the extent tree
em->in_tree = 0;
return ret;
}
-EXPORT_SYMBOL(remove_extent_mapping);
return 0;
}
-int btrfs_check_file(struct btrfs_root *root, struct inode *inode)
-{
- return 0;
-#if 0
- struct btrfs_path *path;
- struct btrfs_key found_key;
- struct extent_buffer *leaf;
- struct btrfs_file_extent_item *extent;
- u64 last_offset = 0;
- int nritems;
- int slot;
- int found_type;
- int ret;
- int err = 0;
- u64 extent_end = 0;
-
- path = btrfs_alloc_path();
- ret = btrfs_lookup_file_extent(NULL, root, path, inode->i_ino,
- last_offset, 0);
- while (1) {
- nritems = btrfs_header_nritems(path->nodes[0]);
- if (path->slots[0] >= nritems) {
- ret = btrfs_next_leaf(root, path);
- if (ret)
- goto out;
- nritems = btrfs_header_nritems(path->nodes[0]);
- }
- slot = path->slots[0];
- leaf = path->nodes[0];
- btrfs_item_key_to_cpu(leaf, &found_key, slot);
- if (found_key.objectid != inode->i_ino)
- break;
- if (found_key.type != BTRFS_EXTENT_DATA_KEY)
- goto out;
-
- if (found_key.offset < last_offset) {
- WARN_ON(1);
- btrfs_print_leaf(root, leaf);
- printk(KERN_ERR "inode %lu found offset %llu "
- "expected %llu\n", inode->i_ino,
- (unsigned long long)found_key.offset,
- (unsigned long long)last_offset);
- err = 1;
- goto out;
- }
- extent = btrfs_item_ptr(leaf, slot,
- struct btrfs_file_extent_item);
- found_type = btrfs_file_extent_type(leaf, extent);
- if (found_type == BTRFS_FILE_EXTENT_REG) {
- extent_end = found_key.offset +
- btrfs_file_extent_num_bytes(leaf, extent);
- } else if (found_type == BTRFS_FILE_EXTENT_INLINE) {
- struct btrfs_item *item;
- item = btrfs_item_nr(leaf, slot);
- extent_end = found_key.offset +
- btrfs_file_extent_inline_len(leaf, extent);
- extent_end = (extent_end + root->sectorsize - 1) &
- ~((u64)root->sectorsize - 1);
- }
- last_offset = extent_end;
- path->slots[0]++;
- }
- if (0 && last_offset < inode->i_size) {
- WARN_ON(1);
- btrfs_print_leaf(root, leaf);
- printk(KERN_ERR "inode %lu found offset %llu size %llu\n",
- inode->i_ino, (unsigned long long)last_offset,
- (unsigned long long)inode->i_size);
- err = 1;
-
- }
-out:
- btrfs_free_path(path);
- return err;
-#endif
-}
-
/*
* this is very complex, but the basic idea is to drop all extents
* in the range start - end. hint_block is filled in with a block number
*/
noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
- u64 start, u64 end, u64 inline_limit, u64 *hint_byte)
+ u64 start, u64 end, u64 locked_end,
+ u64 inline_limit, u64 *hint_byte)
{
u64 extent_end = 0;
- u64 locked_end = end;
u64 search_start = start;
u64 leaf_start;
u64 ram_bytes = 0;
u64 orig_parent = 0;
u64 disk_bytenr = 0;
+ u64 orig_locked_end = locked_end;
u8 compression;
u8 encryption;
u16 other_encoding = 0;
}
out:
btrfs_free_path(path);
- if (locked_end > end) {
- unlock_extent(&BTRFS_I(inode)->io_tree, end, locked_end - 1,
- GFP_NOFS);
+ if (locked_end > orig_locked_end) {
+ unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end,
+ locked_end - 1, GFP_NOFS);
}
- btrfs_check_file(root, inode);
return ret;
}
ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
BUG_ON(ret);
- goto done;
+ goto release;
} else if (split == start) {
if (locked_end < extent_end) {
ret = try_lock_extent(&BTRFS_I(inode)->io_tree,
}
done:
btrfs_mark_buffer_dirty(leaf);
+
+release:
btrfs_release_path(root, path);
if (split_end && split == start) {
split = end;
if (will_write) {
btrfs_fdatawrite_range(inode->i_mapping, pos,
pos + write_bytes - 1,
- WB_SYNC_NONE);
+ WB_SYNC_ALL);
} else {
balance_dirty_pages_ratelimited_nr(inode->i_mapping,
num_pages);
printk(KERN_ERR "couldn't find space %llu to free\n",
(unsigned long long)offset);
printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
- block_group->cached, block_group->key.objectid,
- block_group->key.offset);
+ block_group->cached,
+ (unsigned long long)block_group->key.objectid,
+ (unsigned long long)block_group->key.offset);
btrfs_dump_free_space(block_group, bytes);
} else if (info) {
printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
"but wanted offset=%llu bytes=%llu\n",
- info->offset, info->bytes, offset, bytes);
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes,
+ (unsigned long long)offset,
+ (unsigned long long)bytes);
}
WARN_ON(1);
}
info = rb_entry(n, struct btrfs_free_space, offset_index);
if (info->bytes >= bytes)
count++;
- printk(KERN_ERR "entry offset %llu, bytes %llu\n", info->offset,
- info->bytes);
+ printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes);
}
printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
"\n", count);
}
path = btrfs_alloc_path();
BUG_ON(!path);
- search_start = max(search_start, BTRFS_FIRST_FREE_OBJECTID);
+ search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID);
search_key.objectid = search_start;
search_key.type = 0;
search_key.offset = 0;
static struct kmem_cache *btrfs_inode_cachep;
struct kmem_cache *btrfs_trans_handle_cachep;
struct kmem_cache *btrfs_transaction_cachep;
-struct kmem_cache *btrfs_bit_radix_cachep;
struct kmem_cache *btrfs_path_cachep;
#define S_SHIFT 12
}
ret = btrfs_drop_extents(trans, root, inode, start,
- aligned_end, start, &hint_byte);
+ aligned_end, aligned_end, start, &hint_byte);
BUG_ON(ret);
if (isize > actual_end)
struct inode *inode, u64 file_pos,
u64 disk_bytenr, u64 disk_num_bytes,
u64 num_bytes, u64 ram_bytes,
+ u64 locked_end,
u8 compression, u8 encryption,
u16 other_encoding, int extent_type)
{
path->leave_spinning = 1;
ret = btrfs_drop_extents(trans, root, inode, file_pos,
- file_pos + num_bytes, file_pos, &hint);
+ file_pos + num_bytes, locked_end,
+ file_pos, &hint);
BUG_ON(ret);
ins.objectid = inode->i_ino;
ordered_extent->disk_len,
ordered_extent->len,
ordered_extent->len,
+ ordered_extent->file_offset +
+ ordered_extent->len,
compressed, 0, 0,
BTRFS_FILE_EXTENT_REG);
BUG_ON(ret);
return 0;
zeroit:
- printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
- "private %llu\n", page->mapping->host->i_ino,
- (unsigned long long)start, csum,
- (unsigned long long)private);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
+ "private %llu\n", page->mapping->host->i_ino,
+ (unsigned long long)start, csum,
+ (unsigned long long)private);
+ }
memset(kaddr + offset, 1, end - start + 1);
flush_dcache_page(page);
kunmap_atomic(kaddr, KM_USER0);
btrfs_free_path(path);
}
+/*
+ * very simple check to peek ahead in the leaf looking for xattrs. If we
+ * don't find any xattrs, we know there can't be any acls.
+ *
+ * slot is the slot the inode is in, objectid is the objectid of the inode
+ */
+static noinline int acls_after_inode_item(struct extent_buffer *leaf,
+ int slot, u64 objectid)
+{
+ u32 nritems = btrfs_header_nritems(leaf);
+ struct btrfs_key found_key;
+ int scanned = 0;
+
+ slot++;
+ while (slot < nritems) {
+ btrfs_item_key_to_cpu(leaf, &found_key, slot);
+
+ /* we found a different objectid, there must not be acls */
+ if (found_key.objectid != objectid)
+ return 0;
+
+ /* we found an xattr, assume we've got an acl */
+ if (found_key.type == BTRFS_XATTR_ITEM_KEY)
+ return 1;
+
+ /*
+ * we found a key greater than an xattr key, there can't
+ * be any acls later on
+ */
+ if (found_key.type > BTRFS_XATTR_ITEM_KEY)
+ return 0;
+
+ slot++;
+ scanned++;
+
+ /*
+ * it goes inode, inode backrefs, xattrs, extents,
+ * so if there are a ton of hard links to an inode there can
+ * be a lot of backrefs. Don't waste time searching too hard,
+ * this is just an optimization
+ */
+ if (scanned >= 8)
+ break;
+ }
+ /* we hit the end of the leaf before we found an xattr or
+ * something larger than an xattr. We have to assume the inode
+ * has acls
+ */
+ return 1;
+}
+
/*
* read an inode from the btree into the in-memory inode
*/
struct btrfs_timespec *tspec;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key location;
+ int maybe_acls;
u64 alloc_group_block;
u32 rdev;
int ret;
alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
+ /*
+ * try to precache a NULL acl entry for files that don't have
+ * any xattrs or acls
+ */
+ maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino);
+ if (!maybe_acls) {
+ BTRFS_I(inode)->i_acl = NULL;
+ BTRFS_I(inode)->i_default_acl = NULL;
+ }
+
BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0,
alloc_group_block, 0);
btrfs_free_path(path);
err = btrfs_drop_extents(trans, root, inode,
cur_offset,
cur_offset + hole_size,
+ block_end,
cur_offset, &hint_byte);
if (err)
break;
{
struct btrfs_inode *bi = BTRFS_I(inode);
- bi->i_acl = NULL;
- bi->i_default_acl = NULL;
+ bi->i_acl = BTRFS_ACL_NOT_CACHED;
+ bi->i_default_acl = BTRFS_ACL_NOT_CACHED;
bi->generation = 0;
bi->sequence = 0;
bi->flags = 0;
bi->index_cnt = (u64)-1;
bi->last_unlink_trans = 0;
+ bi->ordered_data_close = 0;
extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
extent_io_tree_init(&BTRFS_I(inode)->io_tree,
inode->i_mapping, GFP_NOFS);
}
if (err) {
free_extent_map(em);
- WARN_ON(1);
return ERR_PTR(err);
}
return em;
kmem_cache_destroy(btrfs_trans_handle_cachep);
if (btrfs_transaction_cachep)
kmem_cache_destroy(btrfs_transaction_cachep);
- if (btrfs_bit_radix_cachep)
- kmem_cache_destroy(btrfs_bit_radix_cachep);
if (btrfs_path_cachep)
kmem_cache_destroy(btrfs_path_cachep);
}
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *))
-{
- return kmem_cache_create(name, size, 0, (SLAB_RECLAIM_ACCOUNT |
- SLAB_MEM_SPREAD | extra_flags), ctor);
-}
-
int btrfs_init_cachep(void)
{
- btrfs_inode_cachep = btrfs_cache_create("btrfs_inode_cache",
- sizeof(struct btrfs_inode),
- 0, init_once);
+ btrfs_inode_cachep = kmem_cache_create("btrfs_inode_cache",
+ sizeof(struct btrfs_inode), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, init_once);
if (!btrfs_inode_cachep)
goto fail;
- btrfs_trans_handle_cachep =
- btrfs_cache_create("btrfs_trans_handle_cache",
- sizeof(struct btrfs_trans_handle),
- 0, NULL);
+
+ btrfs_trans_handle_cachep = kmem_cache_create("btrfs_trans_handle_cache",
+ sizeof(struct btrfs_trans_handle), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_trans_handle_cachep)
goto fail;
- btrfs_transaction_cachep = btrfs_cache_create("btrfs_transaction_cache",
- sizeof(struct btrfs_transaction),
- 0, NULL);
+
+ btrfs_transaction_cachep = kmem_cache_create("btrfs_transaction_cache",
+ sizeof(struct btrfs_transaction), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_transaction_cachep)
goto fail;
- btrfs_path_cachep = btrfs_cache_create("btrfs_path_cache",
- sizeof(struct btrfs_path),
- 0, NULL);
+
+ btrfs_path_cachep = kmem_cache_create("btrfs_path_cache",
+ sizeof(struct btrfs_path), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_path_cachep)
goto fail;
- btrfs_bit_radix_cachep = btrfs_cache_create("btrfs_radix", 256,
- SLAB_DESTROY_BY_RCU, NULL);
- if (!btrfs_bit_radix_cachep)
- goto fail;
+
return 0;
fail:
btrfs_destroy_cachep();
return err;
}
-static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
- u64 alloc_hint, int mode)
+static int prealloc_file_range(struct btrfs_trans_handle *trans,
+ struct inode *inode, u64 start, u64 end,
+ u64 locked_end, u64 alloc_hint, int mode)
{
- struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 alloc_size;
u64 num_bytes = end - start;
int ret = 0;
- trans = btrfs_join_transaction(root, 1);
- BUG_ON(!trans);
- btrfs_set_trans_block_group(trans, inode);
-
while (num_bytes > 0) {
alloc_size = min(num_bytes, root->fs_info->max_extent);
ret = btrfs_reserve_extent(trans, root, alloc_size,
ret = insert_reserved_file_extent(trans, inode,
cur_offset, ins.objectid,
ins.offset, ins.offset,
- ins.offset, 0, 0, 0,
+ ins.offset, locked_end,
+ 0, 0, 0,
BTRFS_FILE_EXTENT_PREALLOC);
BUG_ON(ret);
num_bytes -= ins.offset;
BUG_ON(ret);
}
- btrfs_end_transaction(trans, root);
return ret;
}
u64 alloc_start;
u64 alloc_end;
u64 alloc_hint = 0;
+ u64 locked_end;
u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
struct extent_map *em;
+ struct btrfs_trans_handle *trans;
int ret;
alloc_start = offset & ~mask;
alloc_end = (offset + len + mask) & ~mask;
+ /*
+ * wait for ordered IO before we have any locks. We'll loop again
+ * below with the locks held.
+ */
+ btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
+
mutex_lock(&inode->i_mutex);
if (alloc_start > inode->i_size) {
ret = btrfs_cont_expand(inode, alloc_start);
goto out;
}
+ locked_end = alloc_end - 1;
while (1) {
struct btrfs_ordered_extent *ordered;
- lock_extent(&BTRFS_I(inode)->io_tree, alloc_start,
- alloc_end - 1, GFP_NOFS);
+
+ trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
+ if (!trans) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /* the extent lock is ordered inside the running
+ * transaction
+ */
+ lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
+ GFP_NOFS);
ordered = btrfs_lookup_first_ordered_extent(inode,
alloc_end - 1);
if (ordered &&
ordered->file_offset < alloc_end) {
btrfs_put_ordered_extent(ordered);
unlock_extent(&BTRFS_I(inode)->io_tree,
- alloc_start, alloc_end - 1, GFP_NOFS);
+ alloc_start, locked_end, GFP_NOFS);
+ btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+
+ /*
+ * we can't wait on the range with the transaction
+ * running or with the extent lock held
+ */
btrfs_wait_ordered_range(inode, alloc_start,
alloc_end - alloc_start);
} else {
last_byte = min(extent_map_end(em), alloc_end);
last_byte = (last_byte + mask) & ~mask;
if (em->block_start == EXTENT_MAP_HOLE) {
- ret = prealloc_file_range(inode, cur_offset,
- last_byte, alloc_hint, mode);
+ ret = prealloc_file_range(trans, inode, cur_offset,
+ last_byte, locked_end + 1,
+ alloc_hint, mode);
if (ret < 0) {
free_extent_map(em);
break;
break;
}
}
- unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1,
+ unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
GFP_NOFS);
+
+ btrfs_end_transaction(trans, BTRFS_I(inode)->root);
out:
mutex_unlock(&inode->i_mutex);
return ret;
return 0;
}
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-
static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
{
u64 new_size;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
namelen = strlen(vol_args->name);
*devstr = '\0';
devstr = vol_args->name;
devid = simple_strtoull(devstr, &end, 10);
- printk(KERN_INFO "resizing devid %llu\n", devid);
+ printk(KERN_INFO "resizing devid %llu\n",
+ (unsigned long long)devid);
}
device = btrfs_find_device(root, devid, NULL, NULL);
if (!device) {
- printk(KERN_INFO "resizer unable to find device %llu\n", devid);
+ printk(KERN_INFO "resizer unable to find device %llu\n",
+ (unsigned long long)devid);
ret = -EINVAL;
goto out_unlock;
}
out_unlock:
mutex_unlock(&root->fs_info->volume_mutex);
-out:
kfree(vol_args);
return ret;
}
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
namelen = strlen(vol_args->name);
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
ret = btrfs_init_new_device(root, vol_args->name);
-out:
kfree(vol_args);
return ret;
}
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
ret = btrfs_rm_device(root, vol_args->name);
-out:
kfree(vol_args);
return ret;
}
BUG_ON(!trans);
/* punch hole in destination first */
- btrfs_drop_extents(trans, root, inode, off, off+len, 0, &hint_byte);
+ btrfs_drop_extents(trans, root, inode, off, off + len,
+ off + len, 0, &hint_byte);
/* clone data */
key.objectid = src->i_ino;
/* start IO across the range first to instantiate any delalloc
* extents
*/
- btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_NONE);
+ btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
/* The compression code will leave pages locked but return from
* writepage without setting the page writeback. Starting again
Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
Opt_ssd, Opt_thread_pool, Opt_noacl, Opt_compress, Opt_notreelog,
- Opt_flushoncommit, Opt_err,
+ Opt_ratio, Opt_flushoncommit, Opt_err,
};
static match_table_t tokens = {
{Opt_noacl, "noacl"},
{Opt_notreelog, "notreelog"},
{Opt_flushoncommit, "flushoncommit"},
+ {Opt_ratio, "metadata_ratio=%d"},
{Opt_err, NULL},
};
info->max_extent = max_t(u64,
info->max_extent, root->sectorsize);
printk(KERN_INFO "btrfs: max_extent at %llu\n",
- info->max_extent);
+ (unsigned long long)info->max_extent);
}
break;
case Opt_max_inline:
root->sectorsize);
}
printk(KERN_INFO "btrfs: max_inline at %llu\n",
- info->max_inline);
+ (unsigned long long)info->max_inline);
}
break;
case Opt_alloc_start:
kfree(num);
printk(KERN_INFO
"btrfs: allocations start at %llu\n",
- info->alloc_start);
+ (unsigned long long)info->alloc_start);
}
break;
case Opt_noacl:
printk(KERN_INFO "btrfs: turning on flush-on-commit\n");
btrfs_set_opt(info->mount_opt, FLUSHONCOMMIT);
break;
+ case Opt_ratio:
+ intarg = 0;
+ match_int(&args[0], &intarg);
+ if (intarg) {
+ info->metadata_ratio = intarg;
+ printk(KERN_INFO "btrfs: metadata ratio %d\n",
+ info->metadata_ratio);
+ }
+ break;
default:
break;
}
if (btrfs_test_opt(root, NOBARRIER))
seq_puts(seq, ",nobarrier");
if (info->max_extent != (u64)-1)
- seq_printf(seq, ",max_extent=%llu", info->max_extent);
+ seq_printf(seq, ",max_extent=%llu",
+ (unsigned long long)info->max_extent);
if (info->max_inline != 8192 * 1024)
- seq_printf(seq, ",max_inline=%llu", info->max_inline);
+ seq_printf(seq, ",max_inline=%llu",
+ (unsigned long long)info->max_inline);
if (info->alloc_start != 0)
- seq_printf(seq, ",alloc_start=%llu", info->alloc_start);
+ seq_printf(seq, ",alloc_start=%llu",
+ (unsigned long long)info->alloc_start);
if (info->thread_pool_size != min_t(unsigned long,
num_online_cpus() + 2, 8))
seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
if (btrfs_test_opt(root, SSD))
seq_puts(seq, ",ssd");
if (btrfs_test_opt(root, NOTREELOG))
- seq_puts(seq, ",no-treelog");
+ seq_puts(seq, ",notreelog");
if (btrfs_test_opt(root, FLUSHONCOMMIT))
- seq_puts(seq, ",flush-on-commit");
+ seq_puts(seq, ",flushoncommit");
if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
seq_puts(seq, ",noacl");
return 0;
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -EBUSY;
goto error_close_devices;
}
error = btrfs_fill_super(s, fs_devices, data,
flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto error_free_subvol_name;
}
mutex_unlock(&s->s_root->d_inode->i_mutex);
if (IS_ERR(root)) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = PTR_ERR(root);
goto error_free_subvol_name;
}
if (!root->d_inode) {
dput(root);
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -ENXIO;
goto error_free_subvol_name;
}
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol = kmalloc(sizeof(*vol), GFP_KERNEL);
- if (!vol)
- return -ENOMEM;
-
- if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) {
- ret = -EFAULT;
- goto out;
- }
+ vol = memdup_user((void __user *)arg, sizeof(*vol));
+ if (IS_ERR(vol))
+ return PTR_ERR(vol);
switch (cmd) {
case BTRFS_IOC_SCAN_DEV:
&btrfs_fs_type, &fs_devices);
break;
}
-out:
+
kfree(vol);
return ret;
}
prepare_to_wait(&info->transaction_wait, &wait,
TASK_UNINTERRUPTIBLE);
mutex_unlock(&info->trans_mutex);
+
+ atomic_dec(&info->throttles);
+ wake_up(&info->transaction_throttle);
+
schedule();
+
+ atomic_inc(&info->throttles);
mutex_lock(&info->trans_mutex);
finish_wait(&info->transaction_wait, &wait);
}
saved_nbytes = inode_get_bytes(inode);
/* drop any overlapping extents */
ret = btrfs_drop_extents(trans, root, inode,
- start, extent_end, start, &alloc_hint);
+ start, extent_end, extent_end, start, &alloc_hint);
BUG_ON(ret);
if (found_type == BTRFS_FILE_EXTENT_REG ||
return NULL;
}
+static void requeue_list(struct btrfs_pending_bios *pending_bios,
+ struct bio *head, struct bio *tail)
+{
+
+ struct bio *old_head;
+
+ old_head = pending_bios->head;
+ pending_bios->head = head;
+ if (pending_bios->tail)
+ tail->bi_next = old_head;
+ else
+ pending_bios->tail = tail;
+}
+
/*
* we try to collect pending bios for a device so we don't get a large
* number of procs sending bios down to the same device. This greatly
struct bio *pending;
struct backing_dev_info *bdi;
struct btrfs_fs_info *fs_info;
+ struct btrfs_pending_bios *pending_bios;
struct bio *tail;
struct bio *cur;
int again = 0;
- unsigned long num_run = 0;
+ unsigned long num_run;
+ unsigned long num_sync_run;
unsigned long limit;
unsigned long last_waited = 0;
limit = btrfs_async_submit_limit(fs_info);
limit = limit * 2 / 3;
+ /* we want to make sure that every time we switch from the sync
+ * list to the normal list, we unplug
+ */
+ num_sync_run = 0;
+
loop:
spin_lock(&device->io_lock);
+ num_run = 0;
loop_lock:
+
/* take all the bios off the list at once and process them
* later on (without the lock held). But, remember the
* tail and other pointers so the bios can be properly reinserted
* into the list if we hit congestion
*/
- pending = device->pending_bios;
- tail = device->pending_bio_tail;
+ if (device->pending_sync_bios.head)
+ pending_bios = &device->pending_sync_bios;
+ else
+ pending_bios = &device->pending_bios;
+
+ pending = pending_bios->head;
+ tail = pending_bios->tail;
WARN_ON(pending && !tail);
- device->pending_bios = NULL;
- device->pending_bio_tail = NULL;
/*
* if pending was null this time around, no bios need processing
* device->running_pending is used to synchronize with the
* schedule_bio code.
*/
- if (pending) {
- again = 1;
- device->running_pending = 1;
- } else {
+ if (device->pending_sync_bios.head == NULL &&
+ device->pending_bios.head == NULL) {
again = 0;
device->running_pending = 0;
+ } else {
+ again = 1;
+ device->running_pending = 1;
}
+
+ pending_bios->head = NULL;
+ pending_bios->tail = NULL;
+
spin_unlock(&device->io_lock);
+ /*
+ * if we're doing the regular priority list, make sure we unplug
+ * for any high prio bios we've sent down
+ */
+ if (pending_bios == &device->pending_bios && num_sync_run > 0) {
+ num_sync_run = 0;
+ blk_run_backing_dev(bdi, NULL);
+ }
+
while (pending) {
+
+ rmb();
+ if (pending_bios != &device->pending_sync_bios &&
+ device->pending_sync_bios.head &&
+ num_run > 16) {
+ cond_resched();
+ spin_lock(&device->io_lock);
+ requeue_list(pending_bios, pending, tail);
+ goto loop_lock;
+ }
+
cur = pending;
pending = pending->bi_next;
cur->bi_next = NULL;
wake_up(&fs_info->async_submit_wait);
BUG_ON(atomic_read(&cur->bi_cnt) == 0);
- bio_get(cur);
submit_bio(cur->bi_rw, cur);
- bio_put(cur);
num_run++;
+ if (bio_sync(cur))
+ num_sync_run++;
+
+ if (need_resched()) {
+ if (num_sync_run) {
+ blk_run_backing_dev(bdi, NULL);
+ num_sync_run = 0;
+ }
+ cond_resched();
+ }
/*
* we made progress, there is more work to do and the bdi
*/
if (pending && bdi_write_congested(bdi) && num_run > 16 &&
fs_info->fs_devices->open_devices > 1) {
- struct bio *old_head;
struct io_context *ioc;
ioc = current->io_context;
* against it before looping
*/
last_waited = ioc->last_waited;
+ if (need_resched()) {
+ if (num_sync_run) {
+ blk_run_backing_dev(bdi, NULL);
+ num_sync_run = 0;
+ }
+ cond_resched();
+ }
continue;
}
spin_lock(&device->io_lock);
-
- old_head = device->pending_bios;
- device->pending_bios = pending;
- if (device->pending_bio_tail)
- tail->bi_next = old_head;
- else
- device->pending_bio_tail = tail;
-
+ requeue_list(pending_bios, pending, tail);
device->running_pending = 1;
spin_unlock(&device->io_lock);
goto done;
}
}
+
+ if (num_sync_run) {
+ num_sync_run = 0;
+ blk_run_backing_dev(bdi, NULL);
+ }
+
+ cond_resched();
if (again)
goto loop;
spin_lock(&device->io_lock);
- if (device->pending_bios)
+ if (device->pending_bios.head || device->pending_sync_bios.head)
goto loop_lock;
spin_unlock(&device->io_lock);
device->io_align = root->sectorsize;
device->sector_size = root->sectorsize;
device->total_bytes = i_size_read(bdev->bd_inode);
+ device->disk_total_bytes = device->total_bytes;
device->dev_root = root->fs_info->dev_root;
device->bdev = bdev;
device->in_fs_metadata = 1;
btrfs_set_device_io_align(leaf, dev_item, device->io_align);
btrfs_set_device_io_width(leaf, dev_item, device->io_width);
btrfs_set_device_sector_size(leaf, dev_item, device->sector_size);
- btrfs_set_device_total_bytes(leaf, dev_item, device->total_bytes);
+ btrfs_set_device_total_bytes(leaf, dev_item, device->disk_total_bytes);
btrfs_set_device_bytes_used(leaf, dev_item, device->bytes_used);
btrfs_mark_buffer_dirty(leaf);
device->total_bytes = new_size;
if (device->writeable)
device->fs_devices->total_rw_bytes -= diff;
- ret = btrfs_update_device(trans, device);
- if (ret) {
- unlock_chunks(root);
- btrfs_end_transaction(trans, root);
- goto done;
- }
- WARN_ON(diff > old_total);
- btrfs_set_super_total_bytes(super_copy, old_total - diff);
unlock_chunks(root);
btrfs_end_transaction(trans, root);
length = btrfs_dev_extent_length(l, dev_extent);
if (key.offset + length <= new_size)
- goto done;
+ break;
chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
goto done;
}
+ /* Shrinking succeeded, else we would be at "done". */
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ lock_chunks(root);
+
+ device->disk_total_bytes = new_size;
+ /* Now btrfs_update_device() will change the on-disk size. */
+ ret = btrfs_update_device(trans, device);
+ if (ret) {
+ unlock_chunks(root);
+ btrfs_end_transaction(trans, root);
+ goto done;
+ }
+ WARN_ON(diff > old_total);
+ btrfs_set_super_total_bytes(super_copy, old_total - diff);
+ unlock_chunks(root);
+ btrfs_end_transaction(trans, root);
done:
btrfs_free_path(path);
return ret;
max_errors = 1;
}
}
- if (multi_ret && rw == WRITE &&
+ if (multi_ret && (rw & (1 << BIO_RW)) &&
stripes_allocated < stripes_required) {
stripes_allocated = map->num_stripes;
free_extent_map(em);
int rw, struct bio *bio)
{
int should_queue = 1;
+ struct btrfs_pending_bios *pending_bios;
/* don't bother with additional async steps for reads, right now */
if (!(rw & (1 << BIO_RW))) {
bio->bi_rw |= rw;
spin_lock(&device->io_lock);
+ if (bio_sync(bio))
+ pending_bios = &device->pending_sync_bios;
+ else
+ pending_bios = &device->pending_bios;
- if (device->pending_bio_tail)
- device->pending_bio_tail->bi_next = bio;
+ if (pending_bios->tail)
+ pending_bios->tail->bi_next = bio;
- device->pending_bio_tail = bio;
- if (!device->pending_bios)
- device->pending_bios = bio;
+ pending_bios->tail = bio;
+ if (!pending_bios->head)
+ pending_bios->head = bio;
if (device->running_pending)
should_queue = 0;
unsigned long ptr;
device->devid = btrfs_device_id(leaf, dev_item);
- device->total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+ device->disk_total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+ device->total_bytes = device->disk_total_bytes;
device->bytes_used = btrfs_device_bytes_used(leaf, dev_item);
device->type = btrfs_device_type(leaf, dev_item);
device->io_align = btrfs_device_io_align(leaf, dev_item);
#include "async-thread.h"
struct buffer_head;
+struct btrfs_pending_bios {
+ struct bio *head;
+ struct bio *tail;
+};
+
struct btrfs_device {
struct list_head dev_list;
struct list_head dev_alloc_list;
struct btrfs_fs_devices *fs_devices;
struct btrfs_root *dev_root;
- struct bio *pending_bios;
- struct bio *pending_bio_tail;
+
+ /* regular prio bios */
+ struct btrfs_pending_bios pending_bios;
+ /* WRITE_SYNC bios */
+ struct btrfs_pending_bios pending_sync_bios;
+
int running_pending;
u64 generation;
/* size of the device */
u64 total_bytes;
+ /* size of the disk */
+ u64 disk_total_bytes;
+
/* bytes used */
u64 bytes_used;
* Completion handler for block_write_full_page() - pages which are unlocked
* during I/O, and which have PageWriteback cleared upon I/O completion.
*/
-static void end_buffer_async_write(struct buffer_head *bh, int uptodate)
+void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
char b[BDEVNAME_SIZE];
unsigned long flags;
set_buffer_async_read(bh);
}
-void mark_buffer_async_write(struct buffer_head *bh)
+void mark_buffer_async_write_endio(struct buffer_head *bh,
+ bh_end_io_t *handler)
{
- bh->b_end_io = end_buffer_async_write;
+ bh->b_end_io = handler;
set_buffer_async_write(bh);
}
+
+void mark_buffer_async_write(struct buffer_head *bh)
+{
+ mark_buffer_async_write_endio(bh, end_buffer_async_write);
+}
EXPORT_SYMBOL(mark_buffer_async_write);
return err;
}
-void do_thaw_all(unsigned long unused)
+void do_thaw_all(struct work_struct *work)
{
struct super_block *sb;
char b[BDEVNAME_SIZE];
goto restart;
}
spin_unlock(&sb_lock);
+ kfree(work);
printk(KERN_WARNING "Emergency Thaw complete\n");
}
*/
void emergency_thaw_all(void)
{
- pdflush_operation(do_thaw_all, 0);
+ struct work_struct *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work) {
+ INIT_WORK(work, do_thaw_all);
+ schedule_work(work);
+ }
}
/**
* locked buffer. This only can happen if someone has written the buffer
* directly, with submit_bh(). At the address_space level PageWriteback
* prevents this contention from occurring.
+ *
+ * If block_write_full_page() is called with wbc->sync_mode ==
+ * WB_SYNC_ALL, the writes are posted using WRITE_SYNC_PLUG; this
+ * causes the writes to be flagged as synchronous writes, but the
+ * block device queue will NOT be unplugged, since usually many pages
+ * will be pushed to the out before the higher-level caller actually
+ * waits for the writes to be completed. The various wait functions,
+ * such as wait_on_writeback_range() will ultimately call sync_page()
+ * which will ultimately call blk_run_backing_dev(), which will end up
+ * unplugging the device queue.
*/
static int __block_write_full_page(struct inode *inode, struct page *page,
- get_block_t *get_block, struct writeback_control *wbc)
+ get_block_t *get_block, struct writeback_control *wbc,
+ bh_end_io_t *handler)
{
int err;
sector_t block;
struct buffer_head *bh, *head;
const unsigned blocksize = 1 << inode->i_blkbits;
int nr_underway = 0;
- int write_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE);
+ int write_op = (wbc->sync_mode == WB_SYNC_ALL ?
+ WRITE_SYNC_PLUG : WRITE);
BUG_ON(!PageLocked(page));
continue;
}
if (test_clear_buffer_dirty(bh)) {
- mark_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, handler);
} else {
unlock_buffer(bh);
}
if (buffer_mapped(bh) && buffer_dirty(bh) &&
!buffer_delay(bh)) {
lock_buffer(bh);
- mark_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, handler);
} else {
/*
* The buffer may have been set dirty during
if ((page->mapping != inode->i_mapping) ||
(page_offset(page) > size)) {
/* page got truncated out from underneath us */
- goto out_unlock;
+ unlock_page(page);
+ goto out;
}
/* page is wholly or partially inside EOF */
ret = block_commit_write(page, 0, end);
if (unlikely(ret)) {
+ unlock_page(page);
if (ret == -ENOMEM)
ret = VM_FAULT_OOM;
else /* -ENOSPC, -EIO, etc */
ret = VM_FAULT_SIGBUS;
- }
+ } else
+ ret = VM_FAULT_LOCKED;
-out_unlock:
- unlock_page(page);
+out:
return ret;
}
out:
ret = mpage_writepage(page, get_block, wbc);
if (ret == -EAGAIN)
- ret = __block_write_full_page(inode, page, get_block, wbc);
+ ret = __block_write_full_page(inode, page, get_block, wbc,
+ end_buffer_async_write);
return ret;
}
EXPORT_SYMBOL(nobh_writepage);
pos += blocksize;
}
+ map_bh.b_size = blocksize;
+ map_bh.b_state = 0;
err = get_block(inode, iblock, &map_bh, 0);
if (err)
goto unlock;
/*
* The generic ->writepage function for buffer-backed address_spaces
+ * this form passes in the end_io handler used to finish the IO.
*/
-int block_write_full_page(struct page *page, get_block_t *get_block,
- struct writeback_control *wbc)
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc, bh_end_io_t *handler)
{
struct inode * const inode = page->mapping->host;
loff_t i_size = i_size_read(inode);
/* Is the page fully inside i_size? */
if (page->index < end_index)
- return __block_write_full_page(inode, page, get_block, wbc);
+ return __block_write_full_page(inode, page, get_block, wbc,
+ handler);
/* Is the page fully outside i_size? (truncate in progress) */
offset = i_size & (PAGE_CACHE_SIZE-1);
* writes to that region are not written out to the file."
*/
zero_user_segment(page, offset, PAGE_CACHE_SIZE);
- return __block_write_full_page(inode, page, get_block, wbc);
+ return __block_write_full_page(inode, page, get_block, wbc, handler);
+}
+
+/*
+ * The generic ->writepage function for buffer-backed address_spaces
+ */
+int block_write_full_page(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc)
+{
+ return block_write_full_page_endio(page, get_block, wbc,
+ end_buffer_async_write);
}
+
sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
get_block_t *get_block)
{
EXPORT_SYMBOL(block_sync_page);
EXPORT_SYMBOL(block_truncate_page);
EXPORT_SYMBOL(block_write_full_page);
+EXPORT_SYMBOL(block_write_full_page_endio);
EXPORT_SYMBOL(cont_write_begin);
EXPORT_SYMBOL(end_buffer_read_sync);
EXPORT_SYMBOL(end_buffer_write_sync);
+EXPORT_SYMBOL(end_buffer_async_write);
EXPORT_SYMBOL(file_fsync);
EXPORT_SYMBOL(generic_block_bmap);
EXPORT_SYMBOL(generic_cont_expand_simple);
}
/*
- * cf-bind.c
+ * bind.c
*/
extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args);
extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache);
/*
- * cf-daemon.c
+ * daemon.c
*/
extern const struct file_operations cachefiles_daemon_fops;
unsigned fnr, unsigned bnr);
/*
- * cf-interface.c
+ * interface.c
*/
extern const struct fscache_cache_ops cachefiles_cache_ops;
/*
- * cf-key.c
+ * key.c
*/
extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type);
/*
- * cf-namei.c
+ * namei.c
*/
extern int cachefiles_delete_object(struct cachefiles_cache *cache,
struct cachefiles_object *object);
struct dentry *dir, char *filename);
/*
- * cf-proc.c
+ * proc.c
*/
#ifdef CONFIG_CACHEFILES_HISTOGRAM
extern atomic_t cachefiles_lookup_histogram[HZ];
#endif
/*
- * cf-rdwr.c
+ * rdwr.c
*/
extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *,
struct page *, gfp_t);
extern void cachefiles_uncache_page(struct fscache_object *, struct page *);
/*
- * cf-security.c
+ * security.c
*/
extern int cachefiles_get_security_ID(struct cachefiles_cache *cache);
extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache,
}
/*
- * cf-xattr.c
+ * xattr.c
*/
extern int cachefiles_check_object_type(struct cachefiles_object *object);
extern int cachefiles_set_object_xattr(struct cachefiles_object *object,
+Version 1.58
+------------
+Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
+when the UTF-8 string is composed of unusually long (more than 4 byte) converted
+characters. Add support for mounting root of a share which redirects immediately
+to DFS target. Convert string conversion functions from Unicode to more
+accurately mark string length before allocating memory (which may help the
+rare cases where a UTF-8 string is much larger than the UCS2 string that
+we converted from). Fix endianness of the vcnum field used during
+session setup to distinguish multiple mounts to same server from different
+userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
+flag to be set to 2, and mount must enable krb5 to turn on extended security).
+
Version 1.57
------------
Improve support for multiple security contexts to the same server. We
fails to support it properly, as with Samba server versions prior to 3.3.2)
Fix "redzone overwritten" bug in cifs_put_tcon (CIFSTcon may allocate too
little memory for the "nativeFileSystem" field returned by the server
-during mount).
+during mount). Endian convert inode numbers if necessary (makes it easier
+to compare inode numbers on network files from big endian systems).
Version 1.56
------------
signing turned on in case buffer was modified
just before it was sent, also this flag will
be used to use the new experimental directory change
- notification code).
+ notification code). When set to 2 enables
+ an additional experimental feature, "raw ntlmssp"
+ session establishment support (which allows
+ specifying "sec=ntlmssp" on mount). The Linux cifs
+ module will use ntlmv2 authentication encapsulated
+ in "raw ntlmssp" (not using SPNEGO) when
+ "sec=ntlmssp" is specified on mount.
+ This support also requires building cifs with
+ the CONFIG_CIFS_EXPERIMENTAL configuration flag.
These experimental features and tracing can be enabled by changing flags in
/proc/fs/cifs (after the cifs module has been installed or built into the
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
for (i = 0; i < num_referrals; i++) {
+ int len;
dump_referral(referrals+i);
- /* connect to a storage node */
- if (referrals[i].flags & DFSREF_STORAGE_SERVER) {
- int len;
- len = strlen(referrals[i].node_name);
- if (len < 2) {
- cERROR(1, ("%s: Net Address path too short: %s",
+ /* connect to a node */
+ len = strlen(referrals[i].node_name);
+ if (len < 2) {
+ cERROR(1, ("%s: Net Address path too short: %s",
__func__, referrals[i].node_name));
- rc = -EINVAL;
- goto out_err;
- }
- mnt = cifs_dfs_do_refmount(nd->path.mnt,
- nd->path.dentry,
- referrals + i);
- cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
- __func__,
+ rc = -EINVAL;
+ goto out_err;
+ }
+ mnt = cifs_dfs_do_refmount(nd->path.mnt,
+ nd->path.dentry, referrals + i);
+ cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
referrals[i].node_name, mnt));
- /* complete mount procedure if we accured submount */
- if (!IS_ERR(mnt))
- break;
- }
+ /* complete mount procedure if we accured submount */
+ if (!IS_ERR(mnt))
+ break;
}
/* we need it cause for() above could exit without valid submount */
/* attach the data */
memcpy(payload, data, datalen);
- rcu_assign_pointer(key->payload.data, payload);
+ key->payload.data = payload;
ret = 0;
error:
/*
* fs/cifs/cifs_unicode.c
*
- * Copyright (c) International Business Machines Corp., 2000,2005
+ * Copyright (c) International Business Machines Corp., 2000,2009
* Modified by Steve French (sfrench@us.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
#include "cifs_debug.h"
/*
- * NAME: cifs_strfromUCS()
- *
- * FUNCTION: Convert little-endian unicode string to character string
+ * cifs_ucs2_bytes - how long will a string be after conversion?
+ * @ucs - pointer to input string
+ * @maxbytes - don't go past this many bytes of input string
+ * @codepage - destination codepage
*
+ * Walk a ucs2le string and return the number of bytes that the string will
+ * be after being converted to the given charset, not including any null
+ * termination required. Don't walk past maxbytes in the source buffer.
*/
int
-cifs_strfromUCS_le(char *to, const __le16 *from,
- int len, const struct nls_table *codepage)
+cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage)
{
int i;
- int outlen = 0;
+ int charlen, outlen = 0;
+ int maxwords = maxbytes / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
- for (i = 0; (i < len) && from[i]; i++) {
- int charlen;
- /* 2.4.0 kernel or greater */
- charlen =
- codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
- NLS_MAX_CHARSET_SIZE);
- if (charlen > 0) {
+ for (i = 0; from[i] && i < maxwords; i++) {
+ charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
+ NLS_MAX_CHARSET_SIZE);
+ if (charlen > 0)
outlen += charlen;
- } else {
- to[outlen++] = '?';
+ else
+ outlen++;
+ }
+
+ return outlen;
+}
+
+/*
+ * cifs_mapchar - convert a little-endian char to proper char in codepage
+ * @target - where converted character should be copied
+ * @src_char - 2 byte little-endian source character
+ * @cp - codepage to which character should be converted
+ * @mapchar - should character be mapped according to mapchars mount option?
+ *
+ * This function handles the conversion of a single character. It is the
+ * responsibility of the caller to ensure that the target buffer is large
+ * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE).
+ */
+static int
+cifs_mapchar(char *target, const __le16 src_char, const struct nls_table *cp,
+ bool mapchar)
+{
+ int len = 1;
+
+ if (!mapchar)
+ goto cp_convert;
+
+ /*
+ * BB: Cannot handle remapping UNI_SLASH until all the calls to
+ * build_path_from_dentry are modified, as they use slash as
+ * separator.
+ */
+ switch (le16_to_cpu(src_char)) {
+ case UNI_COLON:
+ *target = ':';
+ break;
+ case UNI_ASTERIK:
+ *target = '*';
+ break;
+ case UNI_QUESTION:
+ *target = '?';
+ break;
+ case UNI_PIPE:
+ *target = '|';
+ break;
+ case UNI_GRTRTHAN:
+ *target = '>';
+ break;
+ case UNI_LESSTHAN:
+ *target = '<';
+ break;
+ default:
+ goto cp_convert;
+ }
+
+out:
+ return len;
+
+cp_convert:
+ len = cp->uni2char(le16_to_cpu(src_char), target,
+ NLS_MAX_CHARSET_SIZE);
+ if (len <= 0) {
+ *target = '?';
+ len = 1;
+ }
+ goto out;
+}
+
+/*
+ * cifs_from_ucs2 - convert utf16le string to local charset
+ * @to - destination buffer
+ * @from - source buffer
+ * @tolen - destination buffer size (in bytes)
+ * @fromlen - source buffer size (in bytes)
+ * @codepage - codepage to which characters should be converted
+ * @mapchar - should characters be remapped according to the mapchars option?
+ *
+ * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * in the provided codepage. The tolen and fromlen parameters are to ensure
+ * that the code doesn't walk off of the end of the buffer (which is always
+ * a danger if the alignment of the source buffer is off). The destination
+ * string is always properly null terminated and fits in the destination
+ * buffer. Returns the length of the destination string in bytes (including
+ * null terminator).
+ *
+ * Note that some windows versions actually send multiword UTF-16 characters
+ * instead of straight UCS-2. The linux nls routines however aren't able to
+ * deal with those characters properly. In the event that we get some of
+ * those characters, they won't be translated properly.
+ */
+int
+cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar)
+{
+ int i, charlen, safelen;
+ int outlen = 0;
+ int nullsize = nls_nullsize(codepage);
+ int fromwords = fromlen / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ /*
+ * because the chars can be of varying widths, we need to take care
+ * not to overflow the destination buffer when we get close to the
+ * end of it. Until we get to this offset, we don't need to check
+ * for overflow however.
+ */
+ safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize);
+
+ for (i = 0; i < fromwords && from[i]; i++) {
+ /*
+ * check to see if converting this character might make the
+ * conversion bleed into the null terminator
+ */
+ if (outlen >= safelen) {
+ charlen = cifs_mapchar(tmp, from[i], codepage, mapchar);
+ if ((outlen + charlen) > (tolen - nullsize))
+ break;
}
+
+ /* put converted char into 'to' buffer */
+ charlen = cifs_mapchar(&to[outlen], from[i], codepage, mapchar);
+ outlen += charlen;
}
- to[outlen] = 0;
+
+ /* properly null-terminate string */
+ for (i = 0; i < nullsize; i++)
+ to[outlen++] = 0;
+
return outlen;
}
return i;
}
+/*
+ * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
+ * @src - source string
+ * @maxlen - don't walk past this many bytes in the source string
+ * @is_unicode - is this a unicode string?
+ * @codepage - destination codepage
+ *
+ * Take a string given by the server, convert it to the local codepage and
+ * put it in a new buffer. Returns a pointer to the new string or NULL on
+ * error.
+ */
+char *
+cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
+ const struct nls_table *codepage)
+{
+ int len;
+ char *dst;
+
+ if (is_unicode) {
+ len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+ len += nls_nullsize(codepage);
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+ false);
+ } else {
+ len = strnlen(src, maxlen);
+ len++;
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ strlcpy(dst, src, len);
+ }
+
+ return dst;
+}
+
* Convert a unicode character to upper or lower case using
* compressed tables.
*
- * Copyright (c) International Business Machines Corp., 2000,2007
+ * Copyright (c) International Business Machines Corp., 2000,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define UNIUPR_NOLOWER /* Example to not expand lower case tables */
+/*
+ * Windows maps these to the user defined 16 bit Unicode range since they are
+ * reserved symbols (along with \ and /), otherwise illegal to store
+ * in filenames in NTFS
+ */
+#define UNI_ASTERIK (__u16) ('*' + 0xF000)
+#define UNI_QUESTION (__u16) ('?' + 0xF000)
+#define UNI_COLON (__u16) (':' + 0xF000)
+#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
+#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
+#define UNI_PIPE (__u16) ('|' + 0xF000)
+#define UNI_SLASH (__u16) ('\\' + 0xF000)
+
/* Just define what we want from uniupr.h. We don't want to define the tables
* in each source file.
*/
#endif /* UNIUPR_NOLOWER */
#ifdef __KERNEL__
-int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
+int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar);
+int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage);
int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup_from_ucs(const char *src, const int maxlen,
+ const bool is_unicode,
+ const struct nls_table *codepage);
#endif
/*
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include "cifsfs.h"
#include "cifspdu.h"
#define DECLARE_GLOBALS_HERE
extern struct task_struct *oplockThread; /* remove sparse warning */
struct task_struct *oplockThread = NULL;
/* extern struct task_struct * dnotifyThread; remove sparse warning */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static struct task_struct *dnotifyThread = NULL;
-#endif
static const struct super_operations cifs_super_ops;
unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
module_param(CIFSMaxBufSize, int, 0);
cifs_inode->clientCanCacheAll = false;
cifs_inode->delete_pending = false;
cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */
+ cifs_inode->server_eof = 0;
/* Can not set i_flags here - they get immediately overwritten
to zero by the VFS */
if (tcon == NULL)
return;
+ lock_kernel();
read_lock(&cifs_tcp_ses_lock);
if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
}
/* BB FIXME - finish add checks for tidStatus BB */
+ unlock_kernel();
return;
}
rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0);
if (rc) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return rc;
}
sb->s_flags |= MS_ACTIVE;
return 0;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static int cifs_dnotify_thread(void *dummyarg)
-{
- struct list_head *tmp;
- struct TCP_Server_Info *server;
-
- do {
- if (try_to_freeze())
- continue;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(15*HZ);
- /* check if any stuck requests that need
- to be woken up and wakeq so the
- thread can wake up and error out */
- read_lock(&cifs_tcp_ses_lock);
- list_for_each(tmp, &cifs_tcp_ses_list) {
- server = list_entry(tmp, struct TCP_Server_Info,
- tcp_ses_list);
- if (atomic_read(&server->inFlight))
- wake_up_all(&server->response_q);
- }
- read_unlock(&cifs_tcp_ses_lock);
- } while (!kthread_should_stop());
-
- return 0;
-}
-#endif
-
static int __init
init_cifs(void)
{
goto out_unregister_dfs_key_type;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
- if (IS_ERR(dnotifyThread)) {
- rc = PTR_ERR(dnotifyThread);
- cERROR(1, ("error %d create dnotify thread", rc));
- goto out_stop_oplock_thread;
- }
-#endif
-
return 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- out_stop_oplock_thread:
-#endif
- kthread_stop(oplockThread);
out_unregister_dfs_key_type:
#ifdef CONFIG_CIFS_DFS_UPCALL
unregister_key_type(&key_type_dns_resolver);
cifs_destroy_inodecache();
cifs_destroy_mids();
cifs_destroy_request_bufs();
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- kthread_stop(dnotifyThread);
-#endif
kthread_stop(oplockThread);
}
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.57"
+#define CIFS_VERSION "1.58"
#endif /* _CIFSFS_H */
LANMAN, /* Legacy LANMAN auth */
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
- RawNTLMSSP, /* NTLMSSP without SPNEGO */
- NTLMSSP, /* NTLMSSP via SPNEGO */
+ RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
+ NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
bool invalidHandle:1; /* file closed via session abend */
bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
- struct semaphore fh_sem; /* prevents reopen race after dead ses*/
+ struct mutex fh_mutex; /* prevents reopen race after dead ses*/
struct cifs_search_info srch_inf;
};
bool clientCanCacheAll:1; /* read and writebehind oplock */
bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
+ u64 server_eof; /* current file size on server */
struct inode vfs_inode;
};
#define CIFSSEC_MAY_PLNTXT 0
#endif /* weak passwords */
#define CIFSSEC_MAY_SEAL 0x00040 /* not supported yet */
+#define CIFSSEC_MAY_NTLMSSP 0x00080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_MUST_SIGN 0x01001
/* note that only one of the following can be set so the
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x3F03F /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0x37037 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x0F00F /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x8F08F /* flags supported if no weak allowed */
#else
-#define CIFSSEC_MASK 0x07007 /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x87087 /* flags supported if no weak allowed */
#endif /* UPCALL */
#endif /* WEAK_PW_HASH */
#define CIFSSEC_MUST_SEAL 0x40040 /* not supported yet */
+#define CIFSSEC_MUST_NTLMSSP 0x80080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
#define CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
-#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
+#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5 | CIFSSEC_MAY_NTLMSSP)
/*
*****************************************************************
* All constants go here
__le32 Type;
__le64 DevMajor;
__le64 DevMinor;
- __u64 UniqueId;
+ __le64 UniqueId;
__le64 Permissions;
__le64 Nlinks;
} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */
} __attribute__((packed));
struct file_internal_info {
- __u64 UniqueId; /* inode number */
+ __le64 UniqueId; /* inode number */
} __attribute__((packed)); /* level 0x3ee */
struct file_mode_info {
__le32 Type;
__le64 DevMajor;
__le64 DevMinor;
- __u64 UniqueId;
+ __le64 UniqueId;
__le64 Permissions;
__le64 Nlinks;
char FileName[1];
__le32 FileNameLength;
__le32 EaSize; /* EA size */
__le32 Reserved;
- __u64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
+ __le64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
char FileName[1];
} __attribute__((packed)) SEARCH_ID_FULL_DIR_INFO; /* level 0x105 FF rsp data */
const struct nls_table *nls_codepage);
extern int CIFSSMBUnixQuerySymLink(const int xid,
struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *syminfo, const int buflen,
+ const unsigned char *searchName, char **syminfo,
const struct nls_table *nls_codepage);
extern int CIFSSMBQueryReparseLinkInfo(const int xid,
struct cifsTconInfo *tcon,
const unsigned char *searchName, __u64 *inode_number,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *codepage);
extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
const struct nls_table *cp, int mapChars);
/*
* fs/cifs/cifssmb.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for constructing the SMB PDUs themselves
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Allocates buffer into dst and copies smb string from src to it.
- * caller is responsible for freeing dst if function returned 0.
- * returns:
- * on success - 0
- * on failure - errno
- */
-static int
-cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
- const bool is_unicode, const struct nls_table *nls_codepage)
-{
- int plen;
-
- if (is_unicode) {
- plen = UniStrnlen((wchar_t *)src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
- } else {
- plen = strnlen(src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- strncpy(*dst, src, plen);
- }
- (*dst)[plen] = 0;
- (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
- return 0;
-
-cifs_strncpy_to_host_ErrExit:
- cERROR(1, ("Failed to allocate buffer for string\n"));
- return -ENOMEM;
-}
-
-
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
cFYI(1, ("Kerberos only mechanism, enable extended security"));
pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
}
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ else if ((secFlags & CIFSSEC_MUST_NTLMSSP) == CIFSSEC_MUST_NTLMSSP)
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ else if ((secFlags & CIFSSEC_AUTH_MASK) == CIFSSEC_MAY_NTLMSSP) {
+ cFYI(1, ("NTLMSSP only mechanism, enable extended security"));
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ }
+#endif
count = 0;
for (i = 0; i < CIFS_NUM_PROT; i++) {
server->secType = NTLMv2;
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
+ else if (secFlags & CIFSSEC_MAY_NTLMSSP)
+ server->secType = NTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
int smb_hdr_len;
int resp_buf_type = 0;
+ *nbytes = 0;
+
cFYI(1, ("write2 at %lld %d bytes", (long long)offset, count));
if (tcon->ses->capabilities & CAP_LARGE_FILES) {
cifs_stats_inc(&tcon->num_writes);
if (rc) {
cFYI(1, ("Send error Write2 = %d", rc));
- *nbytes = 0;
} else if (resp_buf_type == 0) {
/* presumably this can not happen, but best to be safe */
rc = -EIO;
- *nbytes = 0;
} else {
WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base;
*nbytes = le16_to_cpu(pSMBr->CountHigh);
int
CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *symlinkinfo, const int buflen,
+ const unsigned char *searchName, char **symlinkinfo,
const struct nls_table *nls_codepage)
{
/* SMB_QUERY_FILE_UNIX_LINK */
int bytes_returned;
int name_len;
__u16 params, byte_count;
+ char *data_start;
cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
- rc = -EIO; /* bad smb */
+ if (rc || (pSMBr->ByteCount < 2))
+ rc = -EIO;
else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+ bool is_unicode;
+ u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+
+ data_start = ((char *) &pSMBr->hdr.Protocol) +
+ le16_to_cpu(pSMBr->t2.DataOffset);
+
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *) ((char *)
- &pSMBr->hdr.Protocol + data_offset),
- min_t(const int, buflen, count) / 2);
/* BB FIXME investigate remapping reserved chars here */
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) ((char *)&pSMBr->hdr.Protocol
- + data_offset),
- name_len, nls_codepage);
- } else {
- strncpy(symlinkinfo,
- (char *) &pSMBr->hdr.Protocol +
- data_offset,
- min_t(const int, buflen, count));
- }
- symlinkinfo[buflen] = 0;
- /* just in case so calling code does not go off the end of buffer */
+ *symlinkinfo = cifs_strndup_from_ucs(data_start, count,
+ is_unicode, nls_codepage);
+ if (!*symlinkinfo)
+ rc = -ENOMEM;
}
}
cifs_buf_release(pSMB);
*pparmlen = parm_count;
return 0;
}
-#endif /* CIFS_EXPERIMENTAL */
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
{
int rc = 0;
int bytes_returned;
- int name_len;
struct smb_com_transaction_ioctl_req *pSMB;
struct smb_com_transaction_ioctl_rsp *pSMBr;
} else { /* decode response */
__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
__u32 data_count = le32_to_cpu(pSMBr->DataCount);
- if ((pSMBr->ByteCount < 2) || (data_offset > 512))
+ if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
/* BB also check enough total bytes returned */
rc = -EIO; /* bad smb */
- else {
- if (data_count && (data_count < 2048)) {
- char *end_of_smb = 2 /* sizeof byte count */ +
- pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
+ goto qreparse_out;
+ }
+ if (data_count && (data_count < 2048)) {
+ char *end_of_smb = 2 /* sizeof byte count */ +
+ pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
- struct reparse_data *reparse_buf =
+ struct reparse_data *reparse_buf =
(struct reparse_data *)
((char *)&pSMBr->hdr.Protocol
+ data_offset);
- if ((char *)reparse_buf >= end_of_smb) {
- rc = -EIO;
- goto qreparse_out;
- }
- if ((reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset +
- reparse_buf->TargetNameLen) >
- end_of_smb) {
- cFYI(1, ("reparse buf beyond SMB"));
- rc = -EIO;
- goto qreparse_out;
- }
+ if ((char *)reparse_buf >= end_of_smb) {
+ rc = -EIO;
+ goto qreparse_out;
+ }
+ if ((reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset +
+ reparse_buf->TargetNameLen) > end_of_smb) {
+ cFYI(1, ("reparse buf beyond SMB"));
+ rc = -EIO;
+ goto qreparse_out;
+ }
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *)
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
+ cifs_from_ucs2(symlinkinfo, (__le16 *)
(reparse_buf->LinkNamesBuf +
reparse_buf->TargetNameOffset),
- min(buflen/2,
- reparse_buf->TargetNameLen / 2));
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) (reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset),
- name_len, nls_codepage);
- } else { /* ASCII names */
- strncpy(symlinkinfo,
- reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset,
- min_t(const int, buflen,
- reparse_buf->TargetNameLen));
- }
- } else {
- rc = -EIO;
- cFYI(1, ("Invalid return data count on "
- "get reparse info ioctl"));
+ buflen,
+ reparse_buf->TargetNameLen,
+ nls_codepage, 0);
+ } else { /* ASCII names */
+ strncpy(symlinkinfo,
+ reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset,
+ min_t(const int, buflen,
+ reparse_buf->TargetNameLen));
}
- symlinkinfo[buflen] = 0; /* just in case so the caller
- does not go off the end of the buffer */
- cFYI(1, ("readlink result - %s", symlinkinfo));
+ } else {
+ rc = -EIO;
+ cFYI(1, ("Invalid return data count on "
+ "get reparse info ioctl"));
}
+ symlinkinfo[buflen] = 0; /* just in case so the caller
+ does not go off the end of the buffer */
+ cFYI(1, ("readlink result - %s", symlinkinfo));
}
+
qreparse_out:
cifs_buf_release(pSMB);
return rc;
}
+#endif /* CIFS_EXPERIMENTAL */
#ifdef CONFIG_CIFS_POSIX
}
pfinfo = (struct file_internal_info *)
(data_offset + (char *) &pSMBr->hdr.Protocol);
- *inode_number = pfinfo->UniqueId;
+ *inode_number = le64_to_cpu(pfinfo->UniqueId);
}
}
GetInodeNumOut:
return rc;
}
-/* computes length of UCS string converted to host codepage
- * @src: UCS string
- * @maxlen: length of the input string in UCS characters
- * (not in bytes)
- *
- * return: size of input string in host codepage
- */
-static int hostlen_fromUCS(const __le16 *src, const int maxlen,
- const struct nls_table *nls_codepage) {
- int i;
- int hostlen = 0;
- char to[4];
- int charlen;
- for (i = 0; (i < maxlen) && src[i]; ++i) {
- charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
- to, NLS_MAX_CHARSET_SIZE);
- hostlen += charlen > 0 ? charlen : 1;
- }
- return hostlen;
-}
-
/* parses DFS refferal V3 structure
* caller is responsible for freeing target_nodes
* returns:
cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
*num_of_nodes,
- le16_to_cpu(pSMBr->DFSFlags)));
+ le32_to_cpu(pSMBr->DFSFlags)));
*target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
*num_of_nodes, GFP_KERNEL);
int max_len;
struct dfs_info3_param *node = (*target_nodes)+i;
- node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->flags = le32_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
- node->path_consumed = hostlen_fromUCS(tmp,
- le16_to_cpu(pSMBr->PathConsumed)/2,
+ node->path_consumed = cifs_ucs2_bytes(tmp,
+ le16_to_cpu(pSMBr->PathConsumed),
nls_codepage);
kfree(tmp);
} else
/* copy DfsPath */
temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->path_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
+ node->path_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (!node->path_name) {
+ rc = -ENOMEM;
goto parse_DFS_referrals_exit;
+ }
/* copy link target UNC */
temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->node_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
- goto parse_DFS_referrals_exit;
-
- ref += le16_to_cpu(ref->Size);
+ node->node_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (!node->node_name)
+ rc = -ENOMEM;
}
parse_DFS_referrals_exit:
/*
* fs/cifs/connect.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
#include <linux/kthread.h>
#include <linux/pagevec.h>
#include <linux/freezer.h>
+#include <linux/namei.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <net/ipv6.h>
return 1;
} else if (strnicmp(value, "krb5", 4) == 0) {
vol->secFlg |= CIFSSEC_MAY_KRB5;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ } else if (strnicmp(value, "ntlmsspi", 8) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP |
+ CIFSSEC_MUST_SIGN;
+ } else if (strnicmp(value, "ntlmssp", 7) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP;
+#endif
} else if (strnicmp(value, "ntlmv2i", 7) == 0) {
vol->secFlg |= CIFSSEC_MAY_NTLMV2 |
CIFSSEC_MUST_SIGN;
return rc;
}
+static void
+cleanup_volume_info(struct smb_vol **pvolume_info)
+{
+ struct smb_vol *volume_info;
+
+ if (!pvolume_info && !*pvolume_info)
+ return;
+
+ volume_info = *pvolume_info;
+ kzfree(volume_info->password);
+ kfree(volume_info->UNC);
+ kfree(volume_info->prepath);
+ kfree(volume_info);
+ *pvolume_info = NULL;
+ return;
+}
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
+/* build_path_to_root returns full path to root when
+ * we do not have an exiting connection (tcon) */
+static char *
+build_unc_path_to_root(const struct smb_vol *volume_info,
+ const struct cifs_sb_info *cifs_sb)
+{
+ char *full_path;
+
+ int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1);
+ full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL);
+ if (full_path == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ strncpy(full_path, volume_info->UNC, unc_len);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+ int i;
+ for (i = 0; i < unc_len; i++) {
+ if (full_path[i] == '\\')
+ full_path[i] = '/';
+ }
+ }
+
+ if (cifs_sb->prepathlen)
+ strncpy(full_path + unc_len, cifs_sb->prepath,
+ cifs_sb->prepathlen);
+
+ full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
+ return full_path;
+}
+#endif
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
- char *mount_data, const char *devname)
+ char *mount_data_global, const char *devname)
{
int rc = 0;
int xid;
struct cifsTconInfo *tcon = NULL;
struct TCP_Server_Info *srvTcp = NULL;
char *full_path;
+ char *mount_data = mount_data_global;
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ struct dfs_info3_param *referrals = NULL;
+ unsigned int num_referrals = 0;
+ int referral_walks_count = 0;
+try_mount_again:
+#endif
+ full_path = NULL;
xid = GetXid();
}
}
- /* check for null share name ie connect to dfs root */
if ((strchr(volume_info->UNC + 3, '\\') == NULL)
&& (strchr(volume_info->UNC + 3, '/') == NULL)) {
- /* rc = connect_to_dfs_path(...) */
- cFYI(1, ("DFS root not supported"));
+ cERROR(1, ("Missing share name"));
rc = -ENODEV;
goto mount_fail_check;
} else {
}
}
if (rc)
- goto mount_fail_check;
+ goto remote_path_check;
tcon->seal = volume_info->seal;
write_lock(&cifs_tcp_ses_lock);
list_add(&tcon->tcon_list, &pSesInfo->tcon_list);
/* BB FIXME fix time_gran to be larger for LANMAN sessions */
sb->s_time_gran = 100;
-mount_fail_check:
- /* on error free sesinfo and tcon struct if needed */
- if (rc) {
- /* If find_unc succeeded then rc == 0 so we can not end */
- /* up accidently freeing someone elses tcon struct */
- if (tcon)
- cifs_put_tcon(tcon);
- else if (pSesInfo)
- cifs_put_smb_ses(pSesInfo);
- else
- cifs_put_tcp_session(srvTcp);
- goto out;
- }
+ if (rc)
+ goto remote_path_check;
+
cifs_sb->tcon = tcon;
/* do not care if following two calls succeed - informational */
cifs_sb->rsize = min(cifs_sb->rsize,
(tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
- if (!rc && cifs_sb->prepathlen) {
+remote_path_check:
+ /* check if a whole path (including prepath) is not remote */
+ if (!rc && cifs_sb->prepathlen && tcon) {
/* build_path_to_root works only when we have a valid tcon */
full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL) {
goto mount_fail_check;
}
rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
- if (rc) {
- cERROR(1, ("Path %s in not accessible: %d",
- full_path, rc));
+ if (rc != -EREMOTE) {
kfree(full_path);
goto mount_fail_check;
}
kfree(full_path);
}
- /* volume_info->password is freed above when existing session found
- (in which case it is not needed anymore) but when new sesion is created
- the password ptr is put in the new session structure (in which case the
- password will be freed at unmount time) */
-out:
- /* zero out password before freeing */
- if (volume_info) {
- if (volume_info->password != NULL) {
- memset(volume_info->password, 0,
- strlen(volume_info->password));
- kfree(volume_info->password);
- }
- kfree(volume_info->UNC);
- kfree(volume_info->prepath);
- kfree(volume_info);
- }
- FreeXid(xid);
- return rc;
-}
-
-static int
-CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char session_key[CIFS_SESS_KEY_SIZE],
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- __u32 capabilities;
- __u16 count;
-
- cFYI(1, ("In sesssetup"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
-
- if (smb_buffer == NULL)
- return -ENOMEM;
-
- smb_buffer_response = smb_buffer;
- pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 13 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req_no_secext.AndXCommand = 0xFF;
- pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
-
- pSMB->req_no_secext.CaseInsensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
-
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- bcc_ptr = pByteArea(smb_buffer);
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
-
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) { /* must be word aligned for Unicode */
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- if (user == NULL)
- bytes_returned = 0; /* skip null user */
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, user, 100,
- nls_codepage);
- /* convert number of 16 bit words to bytes */
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* trailing null */
- if (domain == NULL)
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr,
- "CIFS_LINUX_DOM", 32, nls_codepage);
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release,
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- } else {
- if (user != NULL) {
- strncpy(bcc_ptr, user, 200);
- bcc_ptr += strnlen(user, 200);
- }
- *bcc_ptr = 0;
- bcc_ptr++;
- if (domain == NULL) {
- strcpy(bcc_ptr, "CIFS_LINUX_DOM");
- bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
- } else {
- strncpy(bcc_ptr, domain, 64);
- bcc_ptr += strnlen(domain, 64);
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- }
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB mark SesInfo struct? */
- ses->Suid = smb_buffer_response->Uid; /* UID left in wire format
- (little endian) */
- cFYI(1, ("UID = %d ", ses->Suid));
- /* response can have either 3 or 4 word count - Samba sends 3 */
- bcc_ptr = pByteArea(smb_buffer_response);
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len < pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4)
- bcc_ptr += blob_len;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response) - 1) / 2;
- /* Unicode strings must be word
- aligned */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC(smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)bcc_ptr,
- remaining_words-1);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverNOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 + (2 * len)] = 0;
- if (strncmp(ses->serverNOS,
- "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string is not always null terminated
- (for e.g. for Windows XP & 2000) */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2*(len+1),
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[1+(2*len)] = 0;
- } else { /* else no more room so create
- dummy domain string */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* no room so create dummy domain
- and NOS string */
-
- /* if these kcallocs fail not much we
- can do, but better to not fail the
- sesssetup itself */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverOS, bcc_ptr, len);
-
- bcc_ptr += len;
- /* null terminate the string */
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverDomain, bcc_ptr,
- len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("Variable field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond "
- "end of SMB"));
+ /* get referral if needed */
+ if (rc == -EREMOTE) {
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (referral_walks_count > MAX_NESTED_LINKS) {
+ /*
+ * BB: when we implement proper loop detection,
+ * we will remove this check. But now we need it
+ * to prevent an indefinite loop if 'DFS tree' is
+ * misconfigured (i.e. has loops).
+ */
+ rc = -ELOOP;
+ goto mount_fail_check;
}
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-sesssetup_nomem: /* do not return an error on nomem for the info strings,
- since that could make reconnection harder, and
- reconnection might be needed to free memory */
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-
-static int
-CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
- struct cifsSesInfo *ses, bool *pNTLMv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(NEGOTIATE_MESSAGE);
- PNEGOTIATE_MESSAGE SecurityBlob;
- PCHALLENGE_MESSAGE SecurityBlob2;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
- if (ses == NULL)
- return -EINVAL;
- domain = ses->domainName;
- *pNTLMv2_flag = false;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *) &pSMB->req.SecurityBlob;
- SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmNegotiate;
- negotiate_flags =
- NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
- NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
- NTLMSSP_NEGOTIATE_56 |
- /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-/* if (ntlmv2_support)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;*/
- /* setup pointers to domain name and workstation name */
- bcc_ptr += SecurityBlobLength;
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
-
- /* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
- along with username on auth request (ie the response to challenge) */
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
+ /* convert forward to back slashes in prepath here if needed */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+ convert_delimiter(cifs_sb->prepath,
+ CIFS_DIR_SEP(cifs_sb));
+ full_path = build_unc_path_to_root(volume_info, cifs_sb);
+ if (IS_ERR(full_path)) {
+ rc = PTR_ERR(full_path);
+ goto mount_fail_check;
}
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null terminate Linux version */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* empty domain field */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
-
- if (smb_buffer_response->Status.CifsError ==
- cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
- rc = 0;
-
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); *//* done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login"));
- /* Do we want to set anything in SesInfo struct when guest login? */
-
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
-
- SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
- if (SecurityBlob2->MessageType != NtLmChallenge) {
- cFYI(1, ("Unexpected NTLMSSP message type received %d",
- SecurityBlob2->MessageType));
- } else if (ses) {
- ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
- cFYI(1, ("UID = %d", ses->Suid));
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
-
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr += blob_len;
- cFYI(1, ("Security Blob Length %d",
- blob_len));
- }
-
- cFYI(1, ("NTLMSSP Challenge rcvd"));
-
- memcpy(ses->server->cryptKey,
- SecurityBlob2->Challenge,
- CIFS_CRYPTO_KEY_SIZE);
- if (SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
- *pNTLMv2_flag = true;
-
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
- || (sign_CIFS_PDUs > 1))
- ses->server->secMode |=
- SECMODE_SIGN_REQUIRED;
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_SIGN)) && (sign_CIFS_PDUs))
- ses->server->secMode |=
- SECMODE_SIGN_ENABLED;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- /* Must word align unicode strings */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC
- (smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 +
- (2 * len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated
- (for e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->serverDomain[2*len]
- = 0;
- ses->serverDomain
- [1 + (2 * len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2,
- GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverOS,
- bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("field of length %d "
- "extends beyond end of smb",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond"
- " end of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
+ cFYI(1, ("Getting referral for: %s", full_path));
+ rc = get_dfs_path(xid, pSesInfo , full_path + 1,
+ cifs_sb->local_nls, &num_referrals, &referrals,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc && num_referrals > 0) {
+ char *fake_devname = NULL;
+
+ if (mount_data != mount_data_global)
+ kfree(mount_data);
+ mount_data = cifs_compose_mount_options(
+ cifs_sb->mountdata, full_path + 1,
+ referrals, &fake_devname);
+ kfree(fake_devname);
+ free_dfs_info_array(referrals, num_referrals);
+
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+
+ cleanup_volume_info(&volume_info);
+ FreeXid(xid);
+ kfree(full_path);
+ referral_walks_count++;
+ goto try_mount_again;
}
- } else {
- cERROR(1, ("Invalid Word count %d:",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-static int
-CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char *ntlm_session_key, bool ntlmv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(AUTHENTICATE_MESSAGE);
- PAUTHENTICATE_MESSAGE SecurityBlob;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *)smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- pSMB->req.hdr.Uid = ses->Suid;
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
+#else /* No DFS support, return error on mount */
+ rc = -EOPNOTSUPP;
+#endif
}
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *)&pSMB->req.SecurityBlob;
- SecurityBlob = (PAUTHENTICATE_MESSAGE)bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmAuthenticate;
- bcc_ptr += SecurityBlobLength;
- negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
- NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
- 0x80000000 | NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
- if (ntlmv2_flag)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;
-
-/* setup pointers to domain name and workstation name */
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
- SecurityBlob->SessionKey.Length = 0;
- SecurityBlob->SessionKey.MaximumLength = 0;
- SecurityBlob->SessionKey.Buffer = 0;
-
- SecurityBlob->LmChallengeResponse.Length = 0;
- SecurityBlob->LmChallengeResponse.MaximumLength = 0;
- SecurityBlob->LmChallengeResponse.Buffer = 0;
-
- SecurityBlob->NtChallengeResponse.Length =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.MaximumLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.Buffer =
- cpu_to_le32(SecurityBlobLength);
- SecurityBlobLength += CIFS_SESS_KEY_SIZE;
- bcc_ptr += CIFS_SESS_KEY_SIZE;
- if (ses->capabilities & CAP_UNICODE) {
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, user, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->UserName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
-
- /* SecurityBlob->WorkstationName.Length =
- cifs_strtoUCS((__le16 *) bcc_ptr, "AMACHINE",64, nls_codepage);
- SecurityBlob->WorkstationName.Length *= 2;
- SecurityBlob->WorkstationName.MaximumLength =
- cpu_to_le16(SecurityBlob->WorkstationName.Length);
- SecurityBlob->WorkstationName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += SecurityBlob->WorkstationName.Length;
- SecurityBlobLength += SecurityBlob->WorkstationName.Length;
- SecurityBlob->WorkstationName.Length =
- cpu_to_le16(SecurityBlob->WorkstationName.Length); */
-
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null term version string */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln;
- negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
- strncpy(bcc_ptr, domain, 63);
- ln = strnlen(domain, 64);
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln;
- strncpy(bcc_ptr, user, 63);
- ln = strnlen(user, 64);
- SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
- /* BB fill in our workstation name if known BB */
-
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* null domain */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
+mount_fail_check:
+ /* on error free sesinfo and tcon struct if needed */
if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3) ||
- (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB Should we set anything
- in SesInfo struct ? */
-/* if (SecurityBlob2->MessageType != NtLm??) {
- cFYI("Unexpected message type on auth response is %d"));
- } */
-
- if (ses) {
- cFYI(1,
- ("Check challenge UID %d vs auth response UID %d",
- ses->Suid, smb_buffer_response->Uid));
- /* UID left in wire format */
- ses->Suid = smb_buffer_response->Uid;
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr +=
- blob_len;
- cFYI(1,
- ("Security Blob Length %d ",
- blob_len));
- }
-
- cFYI(1,
- ("NTLMSSP response to Authenticate "));
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- bcc_ptr++; /* Unicode strings must be word aligned */
- } else {
- remaining_words = BCC(smb_buffer_response) / 2;
- }
- len = UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1+(2*len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated (e.g. for Windows XP & 2000) */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->
- serverDomain,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->
- serverDomain[2
- * len]
- = 0;
- ses->
- serverDomain[1
- +
- (2
- *
- len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2,GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) -
- (long) pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
- strncpy(ses->serverOS,bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverNOS,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1, ("field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob extends beyond end "
- "of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
- }
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
+ if (mount_data != mount_data_global)
+ kfree(mount_data);
+ /* If find_unc succeeded then rc == 0 so we can not end */
+ /* up accidently freeing someone elses tcon struct */
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+ else
+ cifs_put_tcp_session(srvTcp);
+ goto out;
}
- cifs_buf_release(smb_buffer);
-
+ /* volume_info->password is freed above when existing session found
+ (in which case it is not needed anymore) but when new sesion is created
+ the password ptr is put in the new session structure (in which case the
+ password will be freed at unmount time) */
+out:
+ /* zero out password before freeing */
+ cleanup_volume_info(&volume_info);
+ FreeXid(xid);
return rc;
}
TCONX_RSP *pSMBr;
unsigned char *bcc_ptr;
int rc = 0;
- int length;
+ int length, bytes_left;
__u16 count;
if (ses == NULL)
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
CIFS_STD_OP);
- /* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
/* above now done in SendReceive */
if ((rc == 0) && (tcon != NULL)) {
+ bool is_unicode;
+
tcon->tidStatus = CifsGood;
tcon->need_reconnect = false;
tcon->tid = smb_buffer_response->Tid;
bcc_ptr = pByteArea(smb_buffer_response);
- length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
+ bytes_left = BCC(smb_buffer_response);
+ length = strnlen(bcc_ptr, bytes_left - 2);
+ if (smb_buffer->Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
+
+
/* skip service field (NB: this field is always ASCII) */
if (length == 3) {
if ((bcc_ptr[0] == 'I') && (bcc_ptr[1] == 'P') &&
}
}
bcc_ptr += length + 1;
+ bytes_left -= (length + 1);
strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- length = UniStrnlen((wchar_t *) bcc_ptr, 512);
- if ((bcc_ptr + (2 * length)) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc(2*(length + 1), GFP_KERNEL);
- if (tcon->nativeFileSystem)
- cifs_strfromUCS_le(
- tcon->nativeFileSystem,
- (__le16 *) bcc_ptr,
- length, nls_codepage);
- bcc_ptr += 2 * length;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr[1] = 0;
- bcc_ptr += 2;
- }
- /* else do not bother copying these information fields*/
- } else {
- length = strnlen(bcc_ptr, 1024);
- if ((bcc_ptr + length) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc(length + 1, GFP_KERNEL);
- if (tcon->nativeFileSystem)
- strncpy(tcon->nativeFileSystem, bcc_ptr,
- length);
- }
- /* else do not bother copying these information fields*/
- }
+
+ /* mostly informational -- no need to fail on error here */
+ tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+ bytes_left, is_unicode,
+ nls_codepage);
+
+ cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
+
if ((smb_buffer_response->WordCount == 3) ||
(smb_buffer_response->WordCount == 7))
/* field is in same location */
struct nls_table *nls_info)
{
int rc = 0;
- char ntlm_session_key[CIFS_SESS_KEY_SIZE];
- bool ntlmv2_flag = false;
int first_time = 0;
struct TCP_Server_Info *server = pSesInfo->server;
pSesInfo->capabilities = server->capabilities;
if (linuxExtEnabled == 0)
pSesInfo->capabilities &= (~CAP_UNIX);
- /* pSesInfo->sequence_number = 0;*/
+
cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
server->secMode, server->capabilities, server->timeAdj));
- if (experimEnabled < 2)
- rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
- else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == NTLMSSP)) {
- rc = -EOPNOTSUPP;
- } else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == RawNTLMSSP)) {
- cFYI(1, ("NTLMSSP sesssetup"));
- rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
- nls_info);
- if (!rc) {
- if (ntlmv2_flag) {
- char *v2_response;
- cFYI(1, ("more secure NTLM ver2 hash"));
- if (CalcNTLMv2_partial_mac_key(pSesInfo,
- nls_info)) {
- rc = -ENOMEM;
- goto ss_err_exit;
- } else
- v2_response = kmalloc(16 + 64 /* blob*/,
- GFP_KERNEL);
- if (v2_response) {
- CalcNTLMv2_response(pSesInfo,
- v2_response);
- /* if (first_time)
- cifs_calculate_ntlmv2_mac_key */
- kfree(v2_response);
- /* BB Put dummy sig in SessSetup PDU? */
- } else {
- rc = -ENOMEM;
- goto ss_err_exit;
- }
-
- } else {
- SMBNTencrypt(pSesInfo->password,
- server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(
- &server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
- }
- /* for better security the weaker lanman hash not sent
- in AuthSessSetup so we no longer calculate it */
-
- rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
- ntlm_session_key,
- ntlmv2_flag,
- nls_info);
- }
- } else { /* old style NTLM 0.12 session setup */
- SMBNTencrypt(pSesInfo->password, server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(&server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
-
- rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
- }
+ rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
if (rc) {
cERROR(1, ("Send error in SessSetup = %d", rc));
} else {
cFYI(1, ("CIFS Session Established successfully"));
- spin_lock(&GlobalMid_Lock);
- pSesInfo->status = CifsGood;
- pSesInfo->need_reconnect = false;
- spin_unlock(&GlobalMid_Lock);
+ spin_lock(&GlobalMid_Lock);
+ pSesInfo->status = CifsGood;
+ pSesInfo->need_reconnect = false;
+ spin_unlock(&GlobalMid_Lock);
}
ss_err_exit:
return full_path;
}
+static void
+cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
+ struct cifsTconInfo *tcon, bool write_only)
+{
+ int oplock = 0;
+ struct cifsFileInfo *pCifsFile;
+ struct cifsInodeInfo *pCifsInode;
+
+ pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+ if (pCifsFile == NULL)
+ return;
+
+ if (oplockEnabled)
+ oplock = REQ_OPLOCK;
+
+ pCifsFile->netfid = fileHandle;
+ pCifsFile->pid = current->tgid;
+ pCifsFile->pInode = newinode;
+ pCifsFile->invalidHandle = false;
+ pCifsFile->closePend = false;
+ mutex_init(&pCifsFile->fh_mutex);
+ mutex_init(&pCifsFile->lock_mutex);
+ INIT_LIST_HEAD(&pCifsFile->llist);
+ atomic_set(&pCifsFile->wrtPending, 0);
+
+ /* set the following in open now
+ pCifsFile->pfile = file; */
+ write_lock(&GlobalSMBSeslock);
+ list_add(&pCifsFile->tlist, &tcon->openFileList);
+ pCifsInode = CIFS_I(newinode);
+ if (pCifsInode) {
+ /* if readable file instance put first in list*/
+ if (write_only)
+ list_add_tail(&pCifsFile->flist,
+ &pCifsInode->openFileList);
+ else
+ list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+
+ if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
+ cFYI(1, ("Exclusive Oplock inode %p", newinode));
+ } else if ((oplock & 0xF) == OPLOCK_READ)
+ pCifsInode->clientCanCacheRead = true;
+ }
+ write_unlock(&GlobalSMBSeslock);
+}
+
int cifs_posix_open(char *full_path, struct inode **pinode,
struct super_block *sb, int mode, int oflags,
int *poplock, __u16 *pnetfid, int xid)
{
int rc;
__u32 oplock;
+ bool write_only = false;
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
if (oflags & O_DIRECT)
posix_flags |= SMB_O_DIRECT;
+ if (!(oflags & FMODE_READ))
+ write_only = true;
+ mode &= ~current_umask();
rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
pnetfid, presp_data, &oplock, full_path,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
if (!pinode)
goto posix_open_ret; /* caller does not need info */
- if (*pinode == NULL)
- *pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+ if (*pinode == NULL) {
+ __u64 unique_id = le64_to_cpu(presp_data->UniqueId);
+ *pinode = cifs_new_inode(sb, &unique_id);
+ }
/* else an inode was passed in. Update its info, don't create one */
/* We do not need to close the file if new_inode fails since
posix_fill_in_inode(*pinode, presp_data, 1);
+ cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+
posix_open_ret:
kfree(presp_data);
return rc;
int create_options = CREATE_NOT_DIR;
int oplock = 0;
int oflags;
+ bool posix_create = false;
/*
* BB below access is probably too much for mknod to request
* but we have to do query and setpathinfo so requesting
char *full_path = NULL;
FILE_ALL_INFO *buf = NULL;
struct inode *newinode = NULL;
- struct cifsInodeInfo *pCifsInode;
int disposition = FILE_OVERWRITE_IF;
bool write_only = false;
return -ENOMEM;
}
- mode &= ~current_umask();
if (oplockEnabled)
oplock = REQ_OPLOCK;
negotation. EREMOTE indicates DFS junction, which is not
handled in posix open */
- if ((rc == 0) && (newinode == NULL))
- goto cifs_create_get_file_info; /* query inode info */
- else if (rc == 0) /* success, no need to query */
- goto cifs_create_set_dentry;
- else if ((rc != -EIO) && (rc != -EREMOTE) &&
- (rc != -EOPNOTSUPP)) /* path not found or net err */
+ if (rc == 0) {
+ posix_create = true;
+ if (newinode == NULL) /* query inode info */
+ goto cifs_create_get_file_info;
+ else /* success, no need to query */
+ goto cifs_create_set_dentry;
+ } else if ((rc != -EIO) && (rc != -EREMOTE) &&
+ (rc != -EOPNOTSUPP) && (rc != -EINVAL))
goto cifs_create_out;
/* else fallthrough to retry, using older open call, this is
case where server does not support this SMB level, and
if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
- } else if (newinode) {
- struct cifsFileInfo *pCifsFile =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
- if (pCifsFile == NULL)
- goto cifs_create_out;
- pCifsFile->netfid = fileHandle;
- pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
- pCifsFile->invalidHandle = false;
- pCifsFile->closePend = false;
- init_MUTEX(&pCifsFile->fh_sem);
- mutex_init(&pCifsFile->lock_mutex);
- INIT_LIST_HEAD(&pCifsFile->llist);
- atomic_set(&pCifsFile->wrtPending, 0);
-
- /* set the following in open now
- pCifsFile->pfile = file; */
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(newinode);
- if (pCifsInode) {
- /* if readable file instance put first in list*/
- if (write_only) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, ("Exclusive Oplock inode %p",
- newinode));
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
- }
- write_unlock(&GlobalSMBSeslock);
+ } else if (!(posix_create) && (newinode)) {
+ cifs_fill_fileinfo(newinode, fileHandle,
+ cifs_sb->tcon, write_only);
}
cifs_create_out:
kfree(buf);
return rc;
}
-
struct dentry *
cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
struct nameidata *nd)
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
+ int oplock = 0;
+ __u16 fileHandle = 0;
+ bool posix_open = false;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
struct inode *newInode = NULL;
char *full_path = NULL;
+ struct file *filp;
xid = GetXid();
}
cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
- if (pTcon->unix_ext)
- rc = cifs_get_inode_info_unix(&newInode, full_path,
- parent_dir_inode->i_sb, xid);
- else
+ /* Posix open is only called (at lookup time) for file create now.
+ * For opens (rather than creates), because we do not know if it
+ * is a file or directory yet, and current Samba no longer allows
+ * us to do posix open on dirs, we could end up wasting an open call
+ * on what turns out to be a dir. For file opens, we wait to call posix
+ * open till cifs_open. It could be added here (lookup) in the future
+ * but the performance tradeoff of the extra network request when EISDIR
+ * or EACCES is returned would have to be weighed against the 50%
+ * reduction in network traffic in the other paths.
+ */
+ if (pTcon->unix_ext) {
+ if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+ (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
+ (nd->intent.open.flags & O_CREAT)) {
+ rc = cifs_posix_open(full_path, &newInode,
+ parent_dir_inode->i_sb,
+ nd->intent.open.create_mode,
+ nd->intent.open.flags, &oplock,
+ &fileHandle, xid);
+ /*
+ * The check below works around a bug in POSIX
+ * open in samba versions 3.3.1 and earlier where
+ * open could incorrectly fail with invalid parameter.
+ * If either that or op not supported returned, follow
+ * the normal lookup.
+ */
+ if ((rc == 0) || (rc == -ENOENT))
+ posix_open = true;
+ else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP))
+ pTcon->broken_posix_open = true;
+ }
+ if (!posix_open)
+ rc = cifs_get_inode_info_unix(&newInode, full_path,
+ parent_dir_inode->i_sb, xid);
+ } else
rc = cifs_get_inode_info(&newInode, full_path, NULL,
- parent_dir_inode->i_sb, xid, NULL);
+ parent_dir_inode->i_sb, xid, NULL);
if ((rc == 0) && (newInode != NULL)) {
if (pTcon->nocase)
else
direntry->d_op = &cifs_dentry_ops;
d_add(direntry, newInode);
-
+ if (posix_open)
+ filp = lookup_instantiate_filp(nd, direntry, NULL);
/* since paths are not looked up by component - the parent
directories are presumed to be good here */
renew_parental_timestamps(direntry);
}
key->type_data.x[0] = datalen;
- rcu_assign_pointer(key->payload.data, ip);
+ key->payload.data = ip;
return rc;
}
memset(private_data, 0, sizeof(struct cifsFileInfo));
private_data->netfid = netfid;
private_data->pid = current->tgid;
- init_MUTEX(&private_data->fh_sem);
+ mutex_init(&private_data->fh_mutex);
mutex_init(&private_data->lock_mutex);
INIT_LIST_HEAD(&private_data->llist);
private_data->pfile = file; /* needed for writepage */
struct file *file, struct cifsInodeInfo *pCifsInode,
struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
{
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-/* struct timespec temp; */ /* BB REMOVEME BB */
- file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
- if (file->private_data == NULL)
- return -ENOMEM;
- pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
if (pCifsInode == NULL) {
return -EINVAL;
}
- /* want handles we can use to read with first
- in the list so we do not have to walk the
- list to search for one in write_begin */
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
-
if (pCifsInode->clientCanCacheRead) {
/* we have the inode open somewhere else
no need to discard cache data */
return 0;
}
+static struct cifsFileInfo *
+cifs_fill_filedata(struct file *file)
+{
+ struct list_head *tmp;
+ struct cifsFileInfo *pCifsFile = NULL;
+ struct cifsInodeInfo *pCifsInode = NULL;
+
+ /* search inode for this file and fill in file->private_data */
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+ read_lock(&GlobalSMBSeslock);
+ list_for_each(tmp, &pCifsInode->openFileList) {
+ pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
+ if ((pCifsFile->pfile == NULL) &&
+ (pCifsFile->pid == current->tgid)) {
+ /* mode set in cifs_create */
+
+ /* needed for writepage */
+ pCifsFile->pfile = file;
+ file->private_data = pCifsFile;
+ break;
+ }
+ }
+ read_unlock(&GlobalSMBSeslock);
+
+ if (file->private_data != NULL) {
+ return pCifsFile;
+ } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+ cERROR(1, ("could not find file instance for "
+ "new file %p", file));
+ return NULL;
+}
+
/* all arguments to this function must be checked for validity in caller */
static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
struct cifsTconInfo *tcon;
struct cifsFileInfo *pCifsFile;
struct cifsInodeInfo *pCifsInode;
- struct list_head *tmp;
char *full_path = NULL;
int desiredAccess;
int disposition;
cifs_sb = CIFS_SB(inode->i_sb);
tcon = cifs_sb->tcon;
- if (file->f_flags & O_CREAT) {
- /* search inode for this file and fill in file->private_data */
- pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &pCifsInode->openFileList) {
- pCifsFile = list_entry(tmp, struct cifsFileInfo,
- flist);
- if ((pCifsFile->pfile == NULL) &&
- (pCifsFile->pid == current->tgid)) {
- /* mode set in cifs_create */
-
- /* needed for writepage */
- pCifsFile->pfile = file;
-
- file->private_data = pCifsFile;
- break;
- }
- }
- read_unlock(&GlobalSMBSeslock);
- if (file->private_data != NULL) {
- rc = 0;
- FreeXid(xid);
- return rc;
- } else {
- if (file->f_flags & O_EXCL)
- cERROR(1, ("could not find file instance for "
- "new file %p", file));
- }
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+ pCifsFile = cifs_fill_filedata(file);
+ if (pCifsFile) {
+ FreeXid(xid);
+ return 0;
}
full_path = build_path_from_dentry(file->f_path.dentry);
/* no need for special case handling of setting mode
on read only files needed here */
+ pCifsFile = cifs_fill_filedata(file);
cifs_posix_open_inode_helper(inode, file, pCifsInode,
pCifsFile, oplock, netfid);
goto out;
return -EBADF;
xid = GetXid();
- down(&pCifsFile->fh_sem);
+ mutex_unlock(&pCifsFile->fh_mutex);
if (!pCifsFile->invalidHandle) {
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
FreeXid(xid);
return 0;
}
if (full_path == NULL) {
rc = -ENOMEM;
reopen_error_exit:
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
FreeXid(xid);
return rc;
}
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
cFYI(1, ("cifs_open returned 0x%x", rc));
cFYI(1, ("oplock: %d", oplock));
} else {
reopen_success:
pCifsFile->netfid = netfid;
pCifsFile->invalidHandle = false;
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
return rc;
}
+/*
+ * Set the timeout on write requests past EOF. For some servers (Windows)
+ * these calls can be very long.
+ *
+ * If we're writing >10M past the EOF we give a 180s timeout. Anything less
+ * than that gets a 45s timeout. Writes not past EOF get 15s timeouts.
+ * The 10M cutoff is totally arbitrary. A better scheme for this would be
+ * welcome if someone wants to suggest one.
+ *
+ * We may be able to do a better job with this if there were some way to
+ * declare that a file should be sparse.
+ */
+static int
+cifs_write_timeout(struct cifsInodeInfo *cifsi, loff_t offset)
+{
+ if (offset <= cifsi->server_eof)
+ return CIFS_STD_OP;
+ else if (offset > (cifsi->server_eof + (10 * 1024 * 1024)))
+ return CIFS_VLONG_OP;
+ else
+ return CIFS_LONG_OP;
+}
+
+/* update the file size (if needed) after a write */
+static void
+cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
+ unsigned int bytes_written)
+{
+ loff_t end_of_write = offset + bytes_written;
+
+ if (end_of_write > cifsi->server_eof)
+ cifsi->server_eof = end_of_write;
+}
+
ssize_t cifs_user_write(struct file *file, const char __user *write_data,
size_t write_size, loff_t *poffset)
{
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
xid = GetXid();
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = CIFS_VLONG_OP; /* writes past EOF take long time */
- else
- long_op = CIFS_LONG_OP;
-
+ long_op = cifs_write_timeout(cifsi, *poffset);
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
rc = -EAGAIN;
FreeXid(xid);
return rc;
}
- } else
+ } else {
+ cifs_update_eof(cifsi, *poffset, bytes_written);
*poffset += bytes_written;
+ }
long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
xid = GetXid();
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */
- else
- long_op = CIFS_LONG_OP;
-
+ long_op = cifs_write_timeout(cifsi, *poffset);
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
rc = -EAGAIN;
FreeXid(xid);
return rc;
}
- } else
+ } else {
+ cifs_update_eof(cifsi, *poffset, bytes_written);
*poffset += bytes_written;
+ }
long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
int nr_pages;
__u64 offset = 0;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(mapping->host);
struct page *page;
struct pagevec pvec;
int rc = 0;
int scanned = 0;
- int xid;
+ int xid, long_op;
cifs_sb = CIFS_SB(mapping->host->i_sb);
cERROR(1, ("No writable handles for inode"));
rc = -EBADF;
} else {
+ long_op = cifs_write_timeout(cifsi, offset);
rc = CIFSSMBWrite2(xid, cifs_sb->tcon,
open_file->netfid,
bytes_to_write, offset,
&bytes_written, iov, n_iov,
- CIFS_LONG_OP);
+ long_op);
atomic_dec(&open_file->wrtPending);
+ cifs_update_eof(cifsi, offset, bytes_written);
+
if (rc || bytes_written < bytes_to_write) {
cERROR(1, ("Write2 ret %d, wrote %d",
rc, bytes_written));
inode->i_nlink = le64_to_cpu(info->Nlinks);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/*
/* get new inode */
if (*pinode == NULL) {
- *pinode = cifs_new_inode(sb, &find_data.UniqueId);
+ __u64 unique_id = le64_to_cpu(find_data.UniqueId);
+ *pinode = cifs_new_inode(sb, &unique_id);
if (*pinode == NULL) {
rc = -ENOMEM;
goto cgiiu_exit;
inode->i_mode |= S_IFREG;
}
+ cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo,
- le64_to_cpu(pfindData->EndOfFile))) {
+ if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
/* can not safely shrink the file size here if the
client is writing to it due to potential races */
- i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+ i_size_write(inode, cifsInfo->server_eof);
/* 512 bytes (2**9) is the fake blocksize that must be
used for this calculation */
goto out_close;
}
+
+/*
+ * If dentry->d_inode is null (usually meaning the cached dentry
+ * is a negative dentry) then we would attempt a standard SMB delete, but
+ * if that fails we can not attempt the fall back mechanisms on EACESS
+ * but will return the EACESS to the caller. Note that the VFS does not call
+ * unlink on negative dentries currently.
+ */
int cifs_unlink(struct inode *dir, struct dentry *dentry)
{
int rc = 0;
int xid;
char *full_path = NULL;
struct inode *inode = dentry->d_inode;
- struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+ struct cifsInodeInfo *cifs_inode;
struct super_block *sb = dir->i_sb;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifsTconInfo *tcon = cifs_sb->tcon;
rc = cifs_rename_pending_delete(full_path, dentry, xid);
if (rc == 0)
drop_nlink(inode);
- } else if (rc == -EACCES && dosattr == 0) {
+ } else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
rc = -ENOMEM;
}
/* try to reset dos attributes */
- origattr = cifsInode->cifsAttrs;
+ cifs_inode = CIFS_I(inode);
+ origattr = cifs_inode->cifsAttrs;
if (origattr == 0)
origattr |= ATTR_NORMAL;
dosattr = origattr & ~ATTR_READONLY;
out_reval:
if (inode) {
- cifsInode = CIFS_I(inode);
- cifsInode->time = 0; /* will force revalidate to get info
+ cifs_inode = CIFS_I(inode);
+ cifs_inode->time = 0; /* will force revalidate to get info
when needed */
inode->i_ctime = current_fs_time(sb);
}
dir->i_ctime = dir->i_mtime = current_fs_time(sb);
- cifsInode = CIFS_I(dir);
+ cifs_inode = CIFS_I(dir);
CIFS_I(dir)->time = 0; /* force revalidate of dir as well */
kfree(full_path);
cFYI(1, ("posix mkdir returned 0x%x", rc));
d_drop(direntry);
} else {
+ __u64 unique_id;
if (pInfo->Type == cpu_to_le32(-1)) {
/* no return info, go query for it */
kfree(pInfo);
else
direntry->d_op = &cifs_dentry_ops;
- newinode = cifs_new_inode(inode->i_sb,
- &pInfo->UniqueId);
+ unique_id = le64_to_cpu(pInfo->UniqueId);
+ newinode = cifs_new_inode(inode->i_sb, &unique_id);
if (newinode == NULL) {
kfree(pInfo);
goto mkdir_get_info;
checking the UniqueId via FILE_INTERNAL_INFO */
unlink_target:
- if ((rc == -EACCES) || (rc == -EEXIST)) {
+ /* Try unlinking the target dentry if it's not negative */
+ if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) {
tmprc = cifs_unlink(target_dir, target_dentry);
if (tmprc)
goto cifs_rename_exit;
}
if (rc == 0) {
+ cifsInode->server_eof = attrs->ia_size;
rc = cifs_vmtruncate(inode, attrs->ia_size);
cifs_truncate_page(inode->i_mapping, inode->i_size);
}
goto out;
}
- if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
- /*
- Flush data before changing file size or changing the last
- write time of the file on the server. If the
- flush returns error, store it to report later and continue.
- BB: This should be smarter. Why bother flushing pages that
- will be truncated anyway? Also, should we error out here if
- the flush returns error?
- */
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc != 0) {
- cifsInode->write_behind_rc = rc;
- rc = 0;
- }
+ /*
+ * Attempt to flush data before changing attributes. We need to do
+ * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+ * ownership or mode then we may also need to do this. Here, we take
+ * the safe way out and just do the flush on all setattr requests. If
+ * the flush returns error, store it to report later and continue.
+ *
+ * BB: This should be smarter. Why bother flushing pages that
+ * will be truncated anyway? Also, should we error out here if
+ * the flush returns error?
+ */
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0) {
+ cifsInode->write_behind_rc = rc;
+ rc = 0;
}
if (attrs->ia_valid & ATTR_SIZE) {
return -ENOMEM;
}
- if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
- /*
- Flush data before changing file size or changing the last
- write time of the file on the server. If the
- flush returns error, store it to report later and continue.
- BB: This should be smarter. Why bother flushing pages that
- will be truncated anyway? Also, should we error out here if
- the flush returns error?
- */
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc != 0) {
- cifsInode->write_behind_rc = rc;
- rc = 0;
- }
+ /*
+ * Attempt to flush data before changing attributes. We need to do
+ * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+ * ownership or mode then we may also need to do this. Here, we take
+ * the safe way out and just do the flush on all setattr requests. If
+ * the flush returns error, store it to report later and continue.
+ *
+ * BB: This should be smarter. Why bother flushing pages that
+ * will be truncated anyway? Also, should we error out here if
+ * the flush returns error?
+ */
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0) {
+ cifsInode->write_behind_rc = rc;
+ rc = 0;
}
if (attrs->ia_valid & ATTR_SIZE) {
cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
{
struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
+ int rc = -ENOMEM;
int xid;
char *full_path = NULL;
- char *target_path = ERR_PTR(-ENOMEM);
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
+ char *target_path = NULL;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct cifsTconInfo *tcon = cifs_sb->tcon;
xid = GetXid();
- full_path = build_path_from_dentry(direntry);
-
- if (!full_path)
- goto out_no_free;
-
- cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
- target_path = kmalloc(PATH_MAX, GFP_KERNEL);
- if (!target_path) {
- target_path = ERR_PTR(-ENOMEM);
+ /*
+ * For now, we just handle symlinks with unix extensions enabled.
+ * Eventually we should handle NTFS reparse points, and MacOS
+ * symlink support. For instance...
+ *
+ * rc = CIFSSMBQueryReparseLinkInfo(...)
+ *
+ * For now, just return -EACCES when the server doesn't support posix
+ * extensions. Note that we still allow querying symlinks when posix
+ * extensions are manually disabled. We could disable these as well
+ * but there doesn't seem to be any harm in allowing the client to
+ * read them.
+ */
+ if (!(tcon->ses->capabilities & CAP_UNIX)) {
+ rc = -EACCES;
goto out;
}
- /* We could change this to:
- if (pTcon->unix_ext)
- but there does not seem any point in refusing to
- get symlink info if we can, even if unix extensions
- turned off for this mount */
-
- if (pTcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- target_path,
- PATH_MAX-1,
- cifs_sb->local_nls);
- else {
- /* BB add read reparse point symlink code here */
- /* rc = CIFSSMBQueryReparseLinkInfo */
- /* BB Add code to Query ReparsePoint info */
- /* BB Add MAC style xsymlink check here if enabled */
- }
-
- if (rc == 0) {
+ full_path = build_path_from_dentry(direntry);
+ if (!full_path)
+ goto out;
-/* BB Add special case check for Samba DFS symlinks */
+ cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
- target_path[PATH_MAX-1] = 0;
- } else {
+ rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path,
+ cifs_sb->local_nls);
+ kfree(full_path);
+out:
+ if (rc != 0) {
kfree(target_path);
target_path = ERR_PTR(rc);
}
-out:
- kfree(full_path);
-out_no_free:
FreeXid(xid);
nd_set_link(nd, target_path);
- return NULL; /* No cookie */
+ return NULL;
}
int
return rc;
}
-int
-cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
-{
- struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
- int xid;
- int oplock = 0;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
- char *full_path = NULL;
- char *tmpbuffer;
- int len;
- __u16 fid;
-
- xid = GetXid();
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
-
-/* BB would it be safe against deadlock to grab this sem
- even though rename itself grabs the sem and calls lookup? */
-/* mutex_lock(&inode->i_sb->s_vfs_rename_mutex);*/
- full_path = build_path_from_dentry(direntry);
-/* mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);*/
-
- if (full_path == NULL) {
- FreeXid(xid);
- return -ENOMEM;
- }
-
- cFYI(1,
- ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
- full_path, inode, pBuffer, buflen));
- if (buflen > PATH_MAX)
- len = PATH_MAX;
- else
- len = buflen;
- tmpbuffer = kmalloc(len, GFP_KERNEL);
- if (tmpbuffer == NULL) {
- kfree(full_path);
- FreeXid(xid);
- return -ENOMEM;
- }
-
-/* BB add read reparse point symlink code and
- Unix extensions symlink code here BB */
-/* We could disable this based on pTcon->unix_ext flag instead ... but why? */
- if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- cifs_sb->local_nls);
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- cERROR(1, ("SFU style symlinks not implemented yet"));
- /* add open and read as in fs/cifs/inode.c */
- } else {
- rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
- OPEN_REPARSE_POINT, &fid, &oplock, NULL,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (!rc) {
- rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- fid,
- cifs_sb->local_nls);
- if (CIFSSMBClose(xid, pTcon, fid)) {
- cFYI(1, ("Error closing junction point "
- "(open for ioctl)"));
- }
- /* If it is a DFS junction earlier we would have gotten
- PATH_NOT_COVERED returned from server so we do
- not need to request the DFS info here */
- }
- }
- /* BB Anything else to do to handle recursive links? */
- /* BB Should we be using page ops here? */
-
- /* BB null terminate returned string in pBuffer? BB */
- if (rc == 0) {
- rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
- cFYI(1,
- ("vfs_readlink called from cifs_readlink returned %d",
- rc));
- }
-
- kfree(tmpbuffer);
- kfree(full_path);
- FreeXid(xid);
- return rc;
-}
-
void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
{
char *p = nd_get_link(nd);
return;
}
-/* Windows maps these to the user defined 16 bit Unicode range since they are
- reserved symbols (along with \ and /), otherwise illegal to store
- in filenames in NTFS */
-#define UNI_ASTERIK (__u16) ('*' + 0xF000)
-#define UNI_QUESTION (__u16) ('?' + 0xF000)
-#define UNI_COLON (__u16) (':' + 0xF000)
-#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
-#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
-#define UNI_PIPE (__u16) ('|' + 0xF000)
-#define UNI_SLASH (__u16) ('\\' + 0xF000)
-
-/* Convert 16 bit Unicode pathname from wire format to string in current code
- page. Conversion may involve remapping up the seven characters that are
- only legal in POSIX-like OS (if they are present in the string). Path
- names are little endian 16 bit Unicode on the wire */
-int
-cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *cp)
-{
- int i, j, len;
- __u16 src_char;
-
- for (i = 0, j = 0; i < maxlen; i++) {
- src_char = le16_to_cpu(source[i]);
- switch (src_char) {
- case 0:
- goto cUCS_out; /* BB check this BB */
- case UNI_COLON:
- target[j] = ':';
- break;
- case UNI_ASTERIK:
- target[j] = '*';
- break;
- case UNI_QUESTION:
- target[j] = '?';
- break;
- /* BB We can not handle remapping slash until
- all the calls to build_path_from_dentry
- are modified, as they use slash as separator BB */
- /* case UNI_SLASH:
- target[j] = '\\';
- break;*/
- case UNI_PIPE:
- target[j] = '|';
- break;
- case UNI_GRTRTHAN:
- target[j] = '>';
- break;
- case UNI_LESSTHAN:
- target[j] = '<';
- break;
- default:
- len = cp->uni2char(src_char, &target[j],
- NLS_MAX_CHARSET_SIZE);
- if (len > 0) {
- j += len;
- continue;
- } else {
- target[j] = '?';
- }
- }
- j++;
- /* make sure we do not overrun callers allocated temp buffer */
- if (j >= (2 * NAME_MAX))
- break;
- }
-cUCS_out:
- target[j] = 0;
- return j;
-}
-
/* Convert 16 bit Unicode pathname to wire format from string in current code
page. Conversion may involve remapping up the seven characters that are
only legal in POSIX-like OS (if they are present in the string). Path
{ErrQuota, -EDQUOT},
{ErrNotALink, -ENOLINK},
{ERRnetlogonNotStarted, -ENOPROTOOPT},
+ {ERRsymlink, -EOPNOTSUPP},
{ErrTooManyLinks, -EMLINK},
{0, 0}
};
ERRDOS, ERRnoaccess, 0xc000028f}, {
ERRDOS, ERRnoaccess, 0xc0000290}, {
ERRDOS, ERRbadfunc, 0xc000029c}, {
+ ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
ERRDOS, ERRinvlevel, 0x007c0001}, };
/*****************************************************************************
extern const struct nt_err_code_struct nt_errs[];
/* Win32 Status codes. */
-
-#define STATUS_BUFFER_OVERFLOW 0x80000005
#define STATUS_MORE_ENTRIES 0x0105
#define ERROR_INVALID_PARAMETER 0x0057
#define ERROR_INSUFFICIENT_BUFFER 0x007a
#define STATUS_SOME_UNMAPPED 0x0107
#define STATUS_BUFFER_OVERFLOW 0x80000005
#define NT_STATUS_NO_MORE_ENTRIES 0x8000001a
+#define NT_STATUS_MEDIA_CHANGED 0x8000001c
+#define NT_STATUS_END_OF_MEDIA 0x8000001e
+#define NT_STATUS_MEDIA_CHECK 0x80000020
+#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
+#define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
#define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
#define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
#define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
#define UnknownMessage cpu_to_le32(8)
/* Negotiate Flags */
-#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are in unicode */
-#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
-#define NTLMSSP_REQUEST_TARGET 0x04 /* Server return its auth realm */
-#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signature capability */
-#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
-#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
-#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Sign/seal use LM session key */
-#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
-#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
+#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are unicode */
+#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
+#define NTLMSSP_REQUEST_TARGET 0x04 /* Srv returns its auth realm */
+/* define reserved9 0x08 */
+#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signing capability */
+#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
+#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
+#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Use LM session key */
+/* defined reserved 8 0x0100 */
+#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
+#define NTLMSSP_NEGOTIATE_NT_ONLY 0x0400 /* Lanman not allowed */
+#define NTLMSSP_ANONYMOUS 0x0800
+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000 /* reserved6 */
#define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server on same machine */
-#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign for all security levels */
-#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
-#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
-#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
-#define NTLMSSP_NEGOTIATE_NTLMV2 0x80000
-#define NTLMSSP_REQUEST_INIT_RESP 0x100000
-#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-#define NTLMSSP_REQUEST_NOT_NT_KEY 0x400000
+#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server same machine */
+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign. All security levels */
+#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
+#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
+#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
+#define NTLMSSP_NEGOTIATE_EXTENDED_SEC 0x80000 /* NB:not related to NTLMv2 pwd*/
+/* #define NTLMSSP_REQUEST_INIT_RESP 0x100000 */
+#define NTLMSSP_NEGOTIATE_IDENTIFY 0x100000
+#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000 /* reserved5 */
+#define NTLMSSP_REQUEST_NON_NT_KEY 0x400000
#define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-#define NTLMSSP_NEGOTIATE_128 0x20000000
-#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-#define NTLMSSP_NEGOTIATE_56 0x80000000
+/* #define reserved4 0x1000000 */
+#define NTLMSSP_NEGOTIATE_VERSION 0x2000000 /* we do not set */
+/* #define reserved3 0x4000000 */
+/* #define reserved2 0x8000000 */
+/* #define reserved1 0x10000000 */
+#define NTLMSSP_NEGOTIATE_128 0x20000000
+#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
+#define NTLMSSP_NEGOTIATE_56 0x80000000
/* Although typedefs are not commonly used for structure definitions */
/* in the Linux kernel, in this particular case they are useful */
typedef struct _SECURITY_BUFFER {
__le16 Length;
__le16 MaximumLength;
- __le32 Buffer; /* offset to buffer */
+ __le32 BufferOffset; /* offset to buffer */
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 1 */
+ __le32 MessageType; /* NtLmNegotiate = 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
SECURITY_BUFFER WorkstationName; /* RFC 1001 and ASCII */
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char DomainString[0];
/* followed by WorkstationString */
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 2 */
+ __le32 MessageType; /* NtLmChallenge = 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
__u8 Reserved[8];
SECURITY_BUFFER TargetInfoArray;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
} __attribute__((packed)) CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
typedef struct _AUTHENTICATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 3 */
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
+ __le32 MessageType; /* NtLmsAuthenticate = 3 */
SECURITY_BUFFER LmChallengeResponse;
SECURITY_BUFFER NtChallengeResponse;
SECURITY_BUFFER DomainName;
SECURITY_BUFFER WorkstationName;
SECURITY_BUFFER SessionKey;
__le32 NegotiateFlags;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char UserString[0];
} __attribute__((packed)) AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
#include "cifs_fs_sb.h"
#include "cifsfs.h"
+/*
+ * To be safe - for UCS to UTF-8 with strings loaded with the rare long
+ * characters alloc more to account for such multibyte target UTF-8
+ * characters.
+ */
+#define UNICODE_NAME_MAX ((4 * NAME_MAX) + 2)
+
#ifdef CONFIG_CIFS_DEBUG2
static void dump_cifs_file_struct(struct file *file, char *label)
{
if (atomic_read(&cifsInfo->inUse) == 0)
atomic_set(&cifsInfo->inUse, 1);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
}
}
+/* BB eventually need to add the following helper function to
+ resolve NT_STATUS_STOPPED_ON_SYMLINK return code when
+ we try to do FindFirst on (NTFS) directory symlinks */
+/*
+int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb,
+ int xid)
+{
+ __u16 fid;
+ int len;
+ int oplock = 0;
+ int rc;
+ struct cifsTconInfo *ptcon = cifs_sb->tcon;
+ char *tmpbuffer;
+
+ rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ,
+ OPEN_REPARSE_POINT, &fid, &oplock, NULL,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc) {
+ tmpbuffer = kmalloc(maxpath);
+ rc = CIFSSMBQueryReparseLinkInfo(xid, ptcon, full_path,
+ tmpbuffer,
+ maxpath -1,
+ fid,
+ cifs_sb->local_nls);
+ if (CIFSSMBClose(xid, ptcon, fid)) {
+ cFYI(1, ("Error closing temporary reparsepoint open)"));
+ }
+ }
+}
+ */
+
static int initiate_cifs_search(const int xid, struct file *file)
{
int rc = 0;
CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
if (rc == 0)
cifsFile->invalidHandle = false;
- if ((rc == -EOPNOTSUPP) &&
+ /* BB add following call to handle readdir on new NTFS symlink errors
+ else if STATUS_STOPPED_ON_SYMLINK
+ call get_symlink_reparse_path and retry with new path */
+ else if ((rc == -EOPNOTSUPP) &&
(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
goto ffirst_retry;
/* inode num, inode type and filename returned */
static int cifs_get_name_from_search_buf(struct qstr *pqst,
char *current_entry, __u16 level, unsigned int unicode,
- struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
+ struct cifs_sb_info *cifs_sb, unsigned int max_len, __u64 *pinum)
{
int rc = 0;
unsigned int len = 0;
len = strnlen(filename, PATH_MAX);
}
- *pinum = pFindData->UniqueId;
+ *pinum = le64_to_cpu(pFindData->UniqueId);
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
(SEARCH_ID_FULL_DIR_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
- *pinum = pFindData->UniqueId;
+ *pinum = le64_to_cpu(pFindData->UniqueId);
} else if (level == SMB_FIND_FILE_BOTH_DIRECTORY_INFO) {
FILE_BOTH_DIRECTORY_INFO *pFindData =
(FILE_BOTH_DIRECTORY_INFO *)current_entry;
}
if (unicode) {
- /* BB fixme - test with long names */
- /* Note converted filename can be longer than in unicode */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- pqst->len = cifs_convertUCSpath((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
- else
- pqst->len = cifs_strfromUCS_le((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
+ pqst->len = cifs_from_ucs2((char *) pqst->name,
+ (__le16 *) filename,
+ UNICODE_NAME_MAX,
+ min(len, max_len), nlt,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
pqst->name = filename;
pqst->len = len;
return rc;
}
-static int cifs_filldir(char *pfindEntry, struct file *file,
- filldir_t filldir, void *direntry, char *scratch_buf, int max_len)
+static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
+ void *direntry, char *scratch_buf, unsigned int max_len)
{
int rc = 0;
struct qstr qstring;
int num_to_fill = 0;
char *tmp_buf = NULL;
char *end_of_smb;
- int max_len;
+ unsigned int max_len;
xid = GetXid();
cifsFile->srch_inf.ntwrk_buf_start);
end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
- /* To be safe - for UCS to UTF-8 with strings loaded
- with the rare long characters alloc more to account for
- such multibyte target UTF-8 characters. cifs_unicode.c,
- which actually does the conversion, has the same limit */
- tmp_buf = kmalloc((2 * NAME_MAX) + 4, GFP_KERNEL);
+ tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
if (current_entry == NULL) {
/* evaluate whether this case is an error */
*
* SMB/CIFS session setup handling routines
*
- * Copyright (c) International Business Machines Corp., 2006, 2007
+ * Copyright (c) International Business Machines Corp., 2006, 2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
get_vc_num_exit:
write_unlock(&cifs_tcp_ses_lock);
- return le16_to_cpu(vcnum);
+ return cpu_to_le16(vcnum);
}
static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
*pbcc_area = bcc_ptr;
}
-static int decode_unicode_ssetup(char **pbcc_area, int bleft,
- struct cifsSesInfo *ses,
- const struct nls_table *nls_cp)
+static void
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp)
{
- int rc = 0;
- int words_left, len;
+ int len;
char *data = *pbcc_area;
-
-
cFYI(1, ("bleft %d", bleft));
-
- /* SMB header is unaligned, so cifs servers word align start of
- Unicode strings */
- data++;
- bleft--; /* Windows servers do not always double null terminate
- their final Unicode string - in which case we
- now will not attempt to decode the byte of junk
- which follows it */
-
- words_left = bleft / 2;
-
- /* save off server operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (len >= words_left)
- return rc;
+ /*
+ * Windows servers do not always double null terminate their final
+ * Unicode string. Check to see if there are an uneven number of bytes
+ * left. If so, then add an extra NULL pad byte to the end of the
+ * response.
+ *
+ * See section 2.7.2 in "Implementing CIFS" for details
+ */
+ if (bleft % 2) {
+ data[bleft] = 0;
+ ++bleft;
+ }
kfree(ses->serverOS);
- /* UTF-8 string will not grow more than four times as big as UCS-16 */
- ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverOS != NULL)
- cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server network operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len >= words_left)
- return rc;
+ ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverOS=%s", ses->serverOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverNOS);
- ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverNOS != NULL) {
- cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
- nls_cp);
- if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server domain */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len > words_left)
- return rc;
+ ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverNOS=%s", ses->serverNOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2 * (len + 1), GFP_KERNEL); /* BB FIXME wrong length */
- if (ses->serverDomain != NULL) {
- cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
- nls_cp);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[(2*len) + 1] = 0;
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
+ ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverDomain=%s", ses->serverDomain));
- cFYI(1, ("words left: %d", words_left));
-
- return rc;
+ return;
}
static int decode_ascii_ssetup(char **pbcc_area, int bleft,
return rc;
}
+static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
+ struct cifsSesInfo *ses)
+{
+ CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
+
+ if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
+ cERROR(1, ("challenge blob len %d too small", blob_len));
+ return -EINVAL;
+ }
+
+ if (memcmp(pblob->Signature, "NTLMSSP", 8)) {
+ cERROR(1, ("blob signature incorrect %s", pblob->Signature));
+ return -EINVAL;
+ }
+ if (pblob->MessageType != NtLmChallenge) {
+ cERROR(1, ("Incorrect message type %d", pblob->MessageType));
+ return -EINVAL;
+ }
+
+ memcpy(ses->server->cryptKey, pblob->Challenge, CIFS_CRYPTO_KEY_SIZE);
+ /* BB we could decode pblob->NegotiateFlags; some may be useful */
+ /* In particular we can examine sign flags */
+ /* BB spec says that if AvId field of MsvAvTimestamp is populated then
+ we must set the MIC field of the AUTHENTICATE_MESSAGE */
+
+ return 0;
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+/* BB Move to ntlmssp.c eventually */
+
+/* We do not malloc the blob, it is passed in pbuffer, because
+ it is fixed size, and small, making this approach cleaner */
+static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses)
+{
+ NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer;
+ __u32 flags;
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmNegotiate;
+
+ /* BB is NTLMV2 session security format easier to use here? */
+ flags = NTLMSSP_NEGOTIATE_56 | NTLMSSP_REQUEST_TARGET |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->WorkstationName.BufferOffset = 0;
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+
+ /* Domain name is sent on the Challenge not Negotiate NTLMSSP request */
+ sec_blob->DomainName.BufferOffset = 0;
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+}
+
+/* We do not malloc the blob, it is passed in pbuffer, because its
+ maximum possible size is fixed and small, making this approach cleaner.
+ This function returns the length of the data in the blob */
+static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp, int first)
+{
+ AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
+ __u32 flags;
+ unsigned char *tmp;
+ char ntlm_session_key[CIFS_SESS_KEY_SIZE];
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmAuthenticate;
+
+ flags = NTLMSSP_NEGOTIATE_56 |
+ NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->LmChallengeResponse.BufferOffset =
+ cpu_to_le32(sizeof(AUTHENTICATE_MESSAGE));
+ sec_blob->LmChallengeResponse.Length = 0;
+ sec_blob->LmChallengeResponse.MaximumLength = 0;
+
+ /* calculate session key, BB what about adding similar ntlmv2 path? */
+ SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+ if (first)
+ cifs_calculate_mac_key(&ses->server->mac_signing_key,
+ ntlm_session_key, ses->password);
+
+ memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.MaximumLength =
+ cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+ tmp += CIFS_SESS_KEY_SIZE;
+
+ if (ses->domainName == NULL) {
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = cpu_to_le16(len);
+ sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ if (ses->userName == NULL) {
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = 0;
+ sec_blob->UserName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = cpu_to_le16(len);
+ sec_blob->UserName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+ tmp += 2;
+
+ sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->SessionKey.Length = 0;
+ sec_blob->SessionKey.MaximumLength = 0;
+ return tmp - pbuffer;
+}
+
+
+static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses)
+{
+ build_ntlmssp_negotiate_blob(&pSMB->req.SecurityBlob[0], ses);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(sizeof(NEGOTIATE_MESSAGE));
+
+ return;
+}
+
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls, int first_time)
+{
+ int bloblen;
+
+ bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
+ first_time);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
+
+ return bloblen;
+}
+#endif
+
int
CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
const struct nls_table *nls_cp)
__u16 action;
int bytes_remaining;
struct key *spnego_key = NULL;
+ __le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
if (ses == NULL)
return -EINVAL;
type = ses->server->secType;
cFYI(1, ("sess setup type %d", type));
+ssetup_ntlmssp_authenticate:
+ if (phase == NtLmChallenge)
+ phase = NtLmAuthenticate; /* if ntlmssp, now final phase */
+
if (type == LANMAN) {
#ifndef CONFIG_CIFS_WEAK_PW_HASH
/* LANMAN and plaintext are less secure and off by default.
goto ssetup_exit;
#endif /* CONFIG_CIFS_UPCALL */
} else {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
+ cERROR(1, ("NTLMSSP requires Unicode support"));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+
+ cFYI(1, ("ntlmssp session setup phase %d", phase));
+ pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ capabilities |= CAP_EXTENDED_SECURITY;
+ pSMB->req.Capabilities |= cpu_to_le32(capabilities);
+ if (phase == NtLmNegotiate) {
+ setup_ntlmssp_neg_req(pSMB, ses);
+ iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
+ } else if (phase == NtLmAuthenticate) {
+ int blob_len;
+ blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+ nls_cp,
+ first_time);
+ iov[1].iov_len = blob_len;
+ /* Make sure that we tell the server that we
+ are using the uid that it just gave us back
+ on the response (challenge) */
+ smb_buf->Uid = ses->Suid;
+ } else {
+ cERROR(1, ("invalid phase %d", phase));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+ iov[1].iov_base = &pSMB->req.SecurityBlob[0];
+ /* unicode strings must be word aligned */
+ if ((iov[0].iov_len + iov[1].iov_len) % 2) {
+ *bcc_ptr = 0;
+ bcc_ptr++;
+ }
+ unicode_oslm_strings(&bcc_ptr, nls_cp);
+ } else {
+ cERROR(1, ("secType %d not supported!", type));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+#else
cERROR(1, ("secType %d not supported!", type));
rc = -ENOSYS;
goto ssetup_exit;
+#endif
}
iov[2].iov_base = str_area;
/* SMB request buf freed in SendReceive2 */
cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
- if (rc)
- goto ssetup_exit;
pSMB = (SESSION_SETUP_ANDX *)iov[0].iov_base;
smb_buf = (struct smb_hdr *)iov[0].iov_base;
+ if ((type == RawNTLMSSP) && (smb_buf->Status.CifsError ==
+ cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))) {
+ if (phase != NtLmNegotiate) {
+ cERROR(1, ("Unexpected more processing error"));
+ goto ssetup_exit;
+ }
+ /* NTLMSSP Negotiate sent now processing challenge (response) */
+ phase = NtLmChallenge; /* process ntlmssp challenge */
+ rc = 0; /* MORE_PROC rc is not an error here, but expected */
+ }
+ if (rc)
+ goto ssetup_exit;
+
if ((smb_buf->WordCount != 3) && (smb_buf->WordCount != 4)) {
rc = -EIO;
cERROR(1, ("bad word count %d", smb_buf->WordCount));
if (smb_buf->WordCount == 4) {
__u16 blob_len;
blob_len = le16_to_cpu(pSMB->resp.SecurityBlobLength);
- bcc_ptr += blob_len;
if (blob_len > bytes_remaining) {
cERROR(1, ("bad security blob length %d", blob_len));
rc = -EINVAL;
goto ssetup_exit;
}
+ if (phase == NtLmChallenge) {
+ rc = decode_ntlmssp_challenge(bcc_ptr, blob_len, ses);
+ /* now goto beginning for ntlmssp authenticate phase */
+ if (rc)
+ goto ssetup_exit;
+ }
+ bcc_ptr += blob_len;
bytes_remaining -= blob_len;
}
/* BB check if Unicode and decode strings */
- if (smb_buf->Flags2 & SMBFLG2_UNICODE)
- rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
- ses, nls_cp);
- else
+ if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+ /* unicode string area must be word-aligned */
+ if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
+ ++bcc_ptr;
+ --bytes_remaining;
+ }
+ decode_unicode_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp);
+ } else {
rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
ses, nls_cp);
+ }
ssetup_exit:
if (spnego_key) {
} else if (resp_buf_type == CIFS_LARGE_BUFFER)
cifs_buf_release(iov[0].iov_base);
+ /* if ntlmssp, and negotiate succeeded, proceed to authenticate phase */
+ if ((phase == NtLmChallenge) && (rc == 0))
+ goto ssetup_ntlmssp_authenticate;
+
return rc;
}
/* Below errors are used internally (do not come over the wire) for passthrough
from STATUS codes to POSIX only */
+#define ERRsymlink 0xFFFD
#define ErrTooManyLinks 0xFFFE
/* Following error codes may be generated with the ERRSRV error class.*/
struct compat_stat __user *statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
- return error;
+ error = vfs_stat(filename, &stat);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
asmlinkage long compat_sys_newlstat(char __user * filename,
struct compat_stat __user *statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
- return error;
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
#ifndef __ARCH_WANT_STAT64
struct compat_stat __user *statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
#endif
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/atalk.h>
-#include <linux/loop.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci.h>
#include <linux/gigaset_dev.h>
#ifdef CONFIG_BLOCK
+#include <linux/loop.h>
#include <scsi/scsi.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/sg.h>
HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
/* block stuff */
#ifdef CONFIG_BLOCK
+/* loop */
+IGNORE_IOCTL(LOOP_CLR_FD)
/* Raw devices */
HANDLE_IOCTL(RAW_SETBIND, raw_ioctl)
HANDLE_IOCTL(RAW_GETBIND, raw_ioctl)
IGNORE_IOCTL(VFAT_IOCTL_READDIR_BOTH32)
IGNORE_IOCTL(VFAT_IOCTL_READDIR_SHORT32)
-/* loop */
-IGNORE_IOCTL(LOOP_CLR_FD)
-
#ifdef CONFIG_SPARC
/* Sparc framebuffers, handled in sbusfb_compat_ioctl() */
IGNORE_IOCTL(FBIOGTYPE)
struct path path;
struct configfs_dirent *sd;
struct config_item *parent_item;
- struct config_item *target_item;
+ struct config_item *target_item = NULL;
struct config_item_type *type;
ret = -EPERM; /* What lack-of-symlink returns */
if ((flags & DCACHE_REFERENCED)
&& (dentry->d_flags & DCACHE_REFERENCED)) {
dentry->d_flags &= ~DCACHE_REFERENCED;
- list_move_tail(&dentry->d_lru, &referenced);
+ list_move(&dentry->d_lru, &referenced);
spin_unlock(&dentry->d_lock);
} else {
list_move_tail(&dentry->d_lru, &tmp);
int result;
unsigned long seq;
- /* FIXME: This is old behavior, needed? Please check callers. */
if (new_dentry == old_dentry)
return 1;
#define PARSE_MOUNT 0
#define PARSE_REMOUNT 1
+/*
+ * parse_mount_options():
+ * Set @opts to mount options specified in @data. If an option is not
+ * specified in @data, set it to its default value. The exception is
+ * 'newinstance' option which can only be set/cleared on a mount (i.e.
+ * cannot be changed during remount).
+ *
+ * Note: @data may be NULL (in which case all options are set to default).
+ */
static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts)
{
char *p;
struct pts_mount_opts opts;
struct super_block *s;
- memset(&opts, 0, sizeof(opts));
- if (data) {
- error = parse_mount_options(data, PARSE_MOUNT, &opts);
- if (error)
- return error;
- }
+ error = parse_mount_options(data, PARSE_MOUNT, &opts);
+ if (error)
+ return error;
if (opts.newinstance)
s = sget(fs_type, NULL, set_anon_super, NULL);
return 0;
out_dput:
- dput(s->s_root);
+ dput(s->s_root); /* undo dget() in simple_set_mnt() */
out_undo_sget:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
struct bio *bio;
bio = bio_alloc(GFP_KERNEL, nr_vecs);
- if (bio == NULL)
- return -ENOMEM;
bio->bi_bdev = bdev;
bio->bi_sector = first_sector;
ecryptfs_inode = page->mapping->host;
crypt_stat =
&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
- if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page,
- 0, PAGE_CACHE_SIZE);
- if (rc)
- printk(KERN_ERR "%s: Error attempting to copy "
- "page at index [%ld]\n", __func__,
- page->index);
- goto out;
- }
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
enc_extent_page = alloc_page(GFP_USER);
if (!enc_extent_page) {
rc = -ENOMEM;
ecryptfs_inode = page->mapping->host;
crypt_stat =
&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
- if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
- PAGE_CACHE_SIZE,
- ecryptfs_inode);
- if (rc)
- printk(KERN_ERR "%s: Error attempting to copy "
- "page at index [%ld]\n", __func__,
- page->index);
- goto out;
- }
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
enc_extent_page = alloc_page(GFP_USER);
if (!enc_extent_page) {
rc = -ENOMEM;
#define ECRYPTFS_ENCRYPT_FILENAMES 0x00000800
#define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000
#define ECRYPTFS_ENCFN_USE_FEK 0x00002000
+#define ECRYPTFS_UNLINK_SIGS 0x00004000
u32 flags;
unsigned int file_version;
size_t iv_bytes;
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
lower_dir_dentry,
ecryptfs_dentry->d_name.len);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
lower_dentry = lookup_one_len(encrypted_and_encoded_name,
lower_dir_dentry,
encrypted_and_encoded_name_size - 1);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
{
char *lower_buf;
+ size_t lower_bufsiz;
struct dentry *lower_dentry;
- struct ecryptfs_crypt_stat *crypt_stat;
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
char *plaintext_name;
size_t plaintext_name_size;
mm_segment_t old_fs;
rc = -EINVAL;
goto out;
}
- crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ dentry->d_sb)->mount_crypt_stat;
+ /*
+ * If the lower filename is encrypted, it will result in a significantly
+ * longer name. If needed, truncate the name after decode and decrypt.
+ */
+ if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+ lower_bufsiz = PATH_MAX;
+ else
+ lower_bufsiz = bufsiz;
/* Released in this function */
- lower_buf = kmalloc(bufsiz, GFP_KERNEL);
+ lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
if (lower_buf == NULL) {
printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc [%d] bytes\n", __func__, bufsiz);
+ "kmalloc [%zd] bytes\n", __func__, lower_bufsiz);
rc = -ENOMEM;
goto out;
}
set_fs(get_ds());
rc = lower_dentry->d_inode->i_op->readlink(lower_dentry,
(char __user *)lower_buf,
- bufsiz);
+ lower_bufsiz);
set_fs(old_fs);
if (rc >= 0) {
rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
rc);
goto out_free_lower_buf;
}
- rc = copy_to_user(buf, plaintext_name, plaintext_name_size);
+ /* Check for bufsiz <= 0 done in sys_readlinkat() */
+ rc = copy_to_user(buf, plaintext_name,
+ min((size_t) bufsiz, plaintext_name_size));
if (rc)
rc = -EFAULT;
else
size_t num_zeros = (PAGE_CACHE_SIZE
- (new_length & ~PAGE_CACHE_MASK));
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+ rc = vmtruncate(inode, new_length);
+ if (rc)
+ goto out_free;
+ rc = vmtruncate(lower_dentry->d_inode, new_length);
+ goto out_free;
+ }
if (num_zeros) {
char *zeros_virt;
}
rc = 0;
crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
- mutex_unlock(&crypt_stat->cs_mutex);
- goto out;
}
}
mutex_unlock(&crypt_stat->cs_mutex);
init_special_inode(inode, lower_inode->i_mode,
lower_inode->i_rdev);
dentry->d_op = &ecryptfs_dops;
- if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
- d_add(dentry, inode);
- else
- d_instantiate(dentry, inode);
fsstack_copy_attr_all(inode, lower_inode, NULL);
/* This size will be overwritten for real files w/ headers and
* other metadata */
fsstack_copy_inode_size(inode, lower_inode);
+ if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
+ d_add(dentry, inode);
+ else
+ d_instantiate(dentry, inode);
out:
return rc;
}
ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata,
ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig,
ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes,
- ecryptfs_opt_err };
+ ecryptfs_opt_unlink_sigs, ecryptfs_opt_err };
static const match_table_t tokens = {
{ecryptfs_opt_sig, "sig=%s"},
{ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"},
{ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"},
{ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"},
+ {ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"},
{ecryptfs_opt_err, NULL}
};
fn_cipher_key_bytes;
fn_cipher_key_bytes_set = 1;
break;
+ case ecryptfs_opt_unlink_sigs:
+ mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS;
+ break;
case ecryptfs_opt_err:
default:
printk(KERN_WARNING
}
goto out;
out_abort:
- dput(sb->s_root);
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ dput(sb->s_root); /* aka mnt->mnt_root, as set by get_sb_nodev() */
+ deactivate_locked_super(sb);
out:
return rc;
}
return rc;
}
-static int
-ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type,
- struct ecryptfs_msg_ctx **msg_ctx);
-
-/**
- * ecryptfs_send_raw_message
- * @msg_type: Message type
- * @daemon: Daemon struct for recipient of message
- *
- * A raw message is one that does not include an ecryptfs_message
- * struct. It simply has a type.
- *
- * Must be called with ecryptfs_daemon_hash_mux held.
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_send_raw_message(u8 msg_type,
- struct ecryptfs_daemon *daemon)
-{
- struct ecryptfs_msg_ctx *msg_ctx;
- int rc;
-
- rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx);
- if (rc) {
- printk(KERN_ERR "%s: Error whilst attempting to send "
- "message to ecryptfsd; rc = [%d]\n", __func__, rc);
- goto out;
- }
- /* Raw messages are logically context-free (e.g., no
- * reply is expected), so we set the state of the
- * ecryptfs_msg_ctx object to indicate that it should
- * be freed as soon as the message is sent. */
- mutex_lock(&msg_ctx->mux);
- msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY;
- mutex_unlock(&msg_ctx->mux);
-out:
- return rc;
-}
-
/**
* ecryptfs_spawn_daemon - Create and initialize a new daemon struct
* @daemon: Pointer to set to newly allocated daemon struct
return rc;
}
-/**
- * ecryptfs_process_helo
- * @euid: The user ID owner of the message
- * @user_ns: The namespace in which @euid applies
- * @pid: The process ID for the userspace program that sent the
- * message
- *
- * Adds the euid and pid values to the daemon euid hash. If an euid
- * already has a daemon pid registered, the daemon will be
- * unregistered before the new daemon is put into the hash list.
- * Returns zero after adding a new daemon to the hash list;
- * non-zero otherwise.
- */
-int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns,
- struct pid *pid)
-{
- struct ecryptfs_daemon *new_daemon;
- struct ecryptfs_daemon *old_daemon;
- int rc;
-
- mutex_lock(&ecryptfs_daemon_hash_mux);
- rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns);
- if (rc != 0) {
- printk(KERN_WARNING "Received request from user [%d] "
- "to register daemon [0x%p]; unregistering daemon "
- "[0x%p]\n", euid, pid, old_daemon->pid);
- rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon);
- if (rc)
- printk(KERN_WARNING "Failed to send QUIT "
- "message to daemon [0x%p]; rc = [%d]\n",
- old_daemon->pid, rc);
- hlist_del(&old_daemon->euid_chain);
- kfree(old_daemon);
- }
- rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid);
- if (rc)
- printk(KERN_ERR "%s: The gods are displeased with this attempt "
- "to create a new daemon object for euid [%d]; pid "
- "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return rc;
-}
-
/**
* ecryptfs_exorcise_daemon - Destroy the daemon struct
*
int rc = 0;
mutex_lock(&msg_ctx->mux);
- if (data) {
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
- printk(KERN_ERR "%s: Out of memory whilst attempting "
- "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
- }
- } else
- msg_ctx->msg = NULL;
+ msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
+ GFP_KERNEL);
+ if (!msg_ctx->msg) {
+ rc = -ENOMEM;
+ printk(KERN_ERR "%s: Out of memory whilst attempting "
+ "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
+ (sizeof(*msg_ctx->msg) + data_size));
+ goto out_unlock;
+ }
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
- if (data) {
- memcpy(msg_ctx->msg->data, data, data_size);
- msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- } else
- msg_ctx->msg_size = 0;
+ memcpy(msg_ctx->msg->data, data, data_size);
+ msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
daemon->num_queued_msg_ctx++;
if (count == 0)
goto out;
- data = kmalloc(count, GFP_KERNEL);
- if (!data) {
- printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc([%zd], GFP_KERNEL)\n", __func__, count);
+
+ data = memdup_user(buf, count);
+ if (IS_ERR(data)) {
+ printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
+ __func__, PTR_ERR(data));
goto out;
}
- rc = copy_from_user(data, buf, count);
- if (rc) {
- printk(KERN_ERR "%s: copy_from_user returned error [%d]\n",
- __func__, rc);
- goto out_free;
- }
sz = count;
i = 0;
switch (data[i++]) {
struct ecryptfs_crypt_stat *crypt_stat;
crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode);
else
ecryptfs_printk(KERN_DEBUG, "Not a new file\n");
ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page"
"(page w/ index = [0x%.16x], to = [%d])\n", index, to);
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+ rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0,
+ to);
+ if (!rc) {
+ rc = copied;
+ fsstack_copy_inode_size(ecryptfs_inode,
+ ecryptfs_inode_to_lower(ecryptfs_inode));
+ }
+ goto out;
+ }
/* Fills in zeros if 'to' goes beyond inode size */
rc = fill_zeros_to_end_of_page(page, to);
if (rc) {
size_t size)
{
struct page *ecryptfs_page;
+ struct ecryptfs_crypt_stat *crypt_stat;
+ struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode;
char *ecryptfs_page_virt;
- loff_t ecryptfs_file_size =
- i_size_read(ecryptfs_file->f_dentry->d_inode);
+ loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode);
loff_t data_offset = 0;
loff_t pos;
int rc = 0;
+ crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
/*
* if we are writing beyond current size, then start pos
* at the current size - we'll fill in zeros from there.
flush_dcache_page(ecryptfs_page);
SetPageUptodate(ecryptfs_page);
unlock_page(ecryptfs_page);
- rc = ecryptfs_encrypt_page(ecryptfs_page);
+ if (crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+ rc = ecryptfs_encrypt_page(ecryptfs_page);
+ else
+ rc = ecryptfs_write_lower_page_segment(ecryptfs_inode,
+ ecryptfs_page,
+ start_offset_in_page,
+ data_offset);
page_cache_release(ecryptfs_page);
if (rc) {
printk(KERN_ERR "%s: Error encrypting "
pos += num_bytes;
}
if ((offset + size) > ecryptfs_file_size) {
- i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size));
- rc = ecryptfs_write_inode_size_to_metadata(
- ecryptfs_file->f_dentry->d_inode);
- if (rc) {
- printk(KERN_ERR "Problem with "
- "ecryptfs_write_inode_size_to_metadata; "
- "rc = [%d]\n", rc);
- goto out;
+ i_size_write(ecryptfs_inode, (offset + size));
+ if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) {
+ rc = ecryptfs_write_inode_size_to_metadata(
+ ecryptfs_inode);
+ if (rc) {
+ printk(KERN_ERR "Problem with "
+ "ecryptfs_write_inode_size_to_metadata; "
+ "rc = [%d]\n", rc);
+ goto out;
+ }
}
}
out:
list_for_each_entry(walker,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
- seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
+ if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK)
+ seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig);
+ else
+ seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
}
mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
seq_printf(m, ",ecryptfs_xattr_metadata");
if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
seq_printf(m, ",ecryptfs_encrypted_view");
+ if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS)
+ seq_printf(m, ",ecryptfs_unlink_sigs");
return 0;
}
SYSCALL_DEFINE1(epoll_create, int, size)
{
- if (size < 0)
+ if (size <= 0)
return -EINVAL;
return sys_epoll_create1(0);
static LIST_HEAD(formats);
static DEFINE_RWLOCK(binfmt_lock);
-int register_binfmt(struct linux_binfmt * fmt)
+int __register_binfmt(struct linux_binfmt * fmt, int insert)
{
if (!fmt)
return -EINVAL;
write_lock(&binfmt_lock);
- list_add(&fmt->lh, &formats);
+ insert ? list_add(&fmt->lh, &formats) :
+ list_add_tail(&fmt->lh, &formats);
write_unlock(&binfmt_lock);
return 0;
}
-EXPORT_SYMBOL(register_binfmt);
+EXPORT_SYMBOL(__register_binfmt);
void unregister_binfmt(struct linux_binfmt * fmt)
{
SYSCALL_DEFINE1(uselib, const char __user *, library)
{
struct file *file;
- struct nameidata nd;
char *tmp = getname(library);
int error = PTR_ERR(tmp);
- if (!IS_ERR(tmp)) {
- error = path_lookup_open(AT_FDCWD, tmp,
- LOOKUP_FOLLOW, &nd,
- FMODE_READ|FMODE_EXEC);
- putname(tmp);
- }
- if (error)
+ if (IS_ERR(tmp))
+ goto out;
+
+ file = do_filp_open(AT_FDCWD, tmp,
+ O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+ MAY_READ | MAY_EXEC | MAY_OPEN);
+ putname(tmp);
+ error = PTR_ERR(file);
+ if (IS_ERR(file))
goto out;
error = -EINVAL;
- if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
goto exit;
error = -EACCES;
- if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- error = inode_permission(nd.path.dentry->d_inode,
- MAY_READ | MAY_EXEC | MAY_OPEN);
- if (error)
- goto exit;
- error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN);
- if (error)
- goto exit;
-
- file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
- error = PTR_ERR(file);
- if (IS_ERR(file))
- goto out;
-
fsnotify_open(file->f_path.dentry);
error = -ENOEXEC;
}
read_unlock(&binfmt_lock);
}
+exit:
fput(file);
out:
return error;
-exit:
- release_open_intent(&nd);
- path_put(&nd.path);
- goto out;
}
#ifdef CONFIG_MMU
struct file *open_exec(const char *name)
{
- struct nameidata nd;
struct file *file;
int err;
- err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
- FMODE_READ|FMODE_EXEC);
- if (err)
+ file = do_filp_open(AT_FDCWD, name,
+ O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+ MAY_EXEC | MAY_OPEN);
+ if (IS_ERR(file))
goto out;
err = -EACCES;
- if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
- goto out_path_put;
-
- if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
- goto out_path_put;
-
- err = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_OPEN);
- if (err)
- goto out_path_put;
- err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN);
- if (err)
- goto out_path_put;
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
+ goto exit;
- file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
- if (IS_ERR(file))
- return file;
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
+ goto exit;
fsnotify_open(file->f_path.dentry);
err = deny_write_access(file);
- if (err) {
- fput(file);
- goto out;
- }
+ if (err)
+ goto exit;
+out:
return file;
- out_path_put:
- release_open_intent(&nd);
- path_put(&nd.path);
- out:
+exit:
+ fput(file);
return ERR_PTR(err);
}
EXPORT_SYMBOL(open_exec);
int check_unsafe_exec(struct linux_binprm *bprm)
{
struct task_struct *p = current, *t;
- unsigned long flags;
unsigned n_fs;
int res = 0;
n_fs = 1;
write_lock(&p->fs->lock);
- lock_task_sighand(p, &flags);
+ rcu_read_lock();
for (t = next_thread(p); t != p; t = next_thread(t)) {
if (t->fs == p->fs)
n_fs++;
}
+ rcu_read_unlock();
if (p->fs->users > n_fs) {
bprm->unsafe |= LSM_UNSAFE_SHARE;
} else {
- if (p->fs->in_exec)
- res = -EAGAIN;
- p->fs->in_exec = 1;
+ res = -EAGAIN;
+ if (!p->fs->in_exec) {
+ p->fs->in_exec = 1;
+ res = 1;
+ }
}
-
- unlock_task_sighand(p, &flags);
write_unlock(&p->fs->lock);
return res;
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
if (depth == 0)
return (err);
-reread:
- partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
/* Simplest case - block found, no allocation needed */
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
while (count < maxblocks && count <= blocks_to_boundary) {
ext2_fsblk_t blk;
- if (!verify_chain(chain, partial)) {
+ if (!verify_chain(chain, chain + depth - 1)) {
/*
* Indirect block might be removed by
* truncate while we were reading it.
* Handling of that case: forget what we've
* got now, go to reread.
*/
+ err = -EAGAIN;
count = 0;
- goto changed;
+ break;
}
blk = le32_to_cpu(*(chain[depth-1].p + count));
if (blk == first_block + count)
else
break;
}
- goto got_it;
+ if (err != -EAGAIN)
+ goto got_it;
}
/* Next simple case - plain lookup or failed read of indirect block */
goto cleanup;
mutex_lock(&ei->truncate_mutex);
+ /*
+ * If the indirect block is missing while we are reading
+ * the chain(ext3_get_branch() returns -EAGAIN err), or
+ * if the chain has been changed after we grab the semaphore,
+ * (either because another process truncated this branch, or
+ * another get_block allocated this branch) re-grab the chain to see if
+ * the request block has been allocated or not.
+ *
+ * Since we already block the truncate/other get_block
+ * at this point, we will have the current copy of the chain when we
+ * splice the branch into the tree.
+ */
+ if (err == -EAGAIN || !verify_chain(chain, partial)) {
+ while (partial > chain) {
+ brelse(partial->bh);
+ partial--;
+ }
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ if (!partial) {
+ count++;
+ mutex_unlock(&ei->truncate_mutex);
+ if (err)
+ goto cleanup;
+ clear_buffer_new(bh_result);
+ goto got_it;
+ }
+ }
/*
* Okay, we need to do block allocation. Lazily initialize the block
partial--;
}
return err;
-changed:
- while (partial > chain) {
- brelse(partial->bh);
- partial--;
- }
- goto reread;
}
int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite)
i_size_write(inode, off+len-towrite);
inode->i_version++;
if (!page_has_buffers(page)) {
create_empty_buffers(page, inode->i_sb->s_blocksize,
(1 << BH_Dirty)|(1 << BH_Uptodate));
- } else if (!walk_page_buffers(NULL, page_buffers(page), 0, PAGE_CACHE_SIZE, NULL, buffer_unmapped)) {
- /* Provide NULL instead of get_block so that we catch bugs if buffers weren't really mapped */
- return block_write_full_page(page, NULL, wbc);
+ page_bufs = page_buffers(page);
+ } else {
+ page_bufs = page_buffers(page);
+ if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE,
+ NULL, buffer_unmapped)) {
+ /* Provide NULL get_block() to catch bugs if buffers
+ * weren't really mapped */
+ return block_write_full_page(page, NULL, wbc);
+ }
}
- page_bufs = page_buffers(page);
-
handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode));
if (IS_ERR(handle)) {
if (ext3_journal_current_handle())
goto out_fail;
+ if (page_has_buffers(page)) {
+ if (!walk_page_buffers(NULL, page_buffers(page), 0,
+ PAGE_CACHE_SIZE, NULL, buffer_unmapped)) {
+ /* Provide NULL get_block() to catch bugs if buffers
+ * weren't really mapped */
+ return block_write_full_page(page, NULL, wbc);
+ }
+ }
+
handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode));
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
{
- ext4_fsblk_t block = ext_pblock(ext);
+ ext4_fsblk_t block = ext_pblock(ext), valid_block;
int len = ext4_ext_get_actual_len(ext);
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
- if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
- ((block + len) > ext4_blocks_count(es))))
+
+ valid_block = le32_to_cpu(es->s_first_data_block) +
+ EXT4_SB(inode->i_sb)->s_gdb_count;
+ if (unlikely(block <= valid_block ||
+ ((block + len) > ext4_blocks_count(es))))
return 0;
else
return 1;
static int ext4_valid_extent_idx(struct inode *inode,
struct ext4_extent_idx *ext_idx)
{
- ext4_fsblk_t block = idx_pblock(ext_idx);
+ ext4_fsblk_t block = idx_pblock(ext_idx), valid_block;
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
- if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
- (block > ext4_blocks_count(es))))
+
+ valid_block = le32_to_cpu(es->s_first_data_block) +
+ EXT4_SB(inode->i_sb)->s_gdb_count;
+ if (unlikely(block <= valid_block ||
+ (block >= ext4_blocks_count(es))))
return 0;
else
return 1;
{
struct ext4_ext_cache *cex;
BUG_ON(len == 0);
+ spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
cex = &EXT4_I(inode)->i_cached_extent;
cex->ec_type = type;
cex->ec_block = block;
cex->ec_len = len;
cex->ec_start = start;
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
}
/*
struct ext4_extent *ex)
{
struct ext4_ext_cache *cex;
+ int ret = EXT4_EXT_CACHE_NO;
+ /*
+ * We borrow i_block_reservation_lock to protect i_cached_extent
+ */
+ spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
cex = &EXT4_I(inode)->i_cached_extent;
/* has cache valid data? */
if (cex->ec_type == EXT4_EXT_CACHE_NO)
- return EXT4_EXT_CACHE_NO;
+ goto errout;
BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP &&
cex->ec_type != EXT4_EXT_CACHE_EXTENT);
ext_debug("%u cached by %u:%u:%llu\n",
block,
cex->ec_block, cex->ec_len, cex->ec_start);
- return cex->ec_type;
+ ret = cex->ec_type;
}
-
- /* not in cache */
- return EXT4_EXT_CACHE_NO;
+errout:
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ return ret;
}
/*
len = ee_len;
bio = bio_alloc(GFP_NOIO, len);
- if (!bio)
- return -ENOMEM;
bio->bi_sector = ee_pblock;
bio->bi_bdev = inode->i_sb->s_bdev;
if (allocated > max_blocks)
allocated = max_blocks;
set_buffer_unwritten(bh_result);
+ bh_result->b_bdev = inode->i_sb->s_bdev;
+ bh_result->b_blocknr = newblock;
goto out2;
}
fallback:
ngroups = sbi->s_groups_count;
avefreei = freei / ngroups;
+fallback_retry:
parent_group = EXT4_I(parent)->i_block_group;
for (i = 0; i < ngroups; i++) {
grp = (parent_group + i) % ngroups;
* filesystems the above test can fail to find any blockgroups
*/
avefreei = 0;
- goto fallback;
+ goto fallback_retry;
}
return -1;
ret2 = find_group_flex(sb, dir, &group);
if (ret2 == -1) {
ret2 = find_group_other(sb, dir, &group, mode);
- if (ret2 == 0 && once)
+ if (ret2 == 0 && once) {
once = 0;
printk(KERN_NOTICE "ext4: find_group_flex "
"failed, fallback succeeded dir %lu\n",
dir->i_ino);
+ }
}
goto got_group;
}
}
static int __ext4_check_blockref(const char *function, struct inode *inode,
- unsigned int *p, unsigned int max) {
+ __le32 *p, unsigned int max) {
unsigned int maxblocks = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es);
- unsigned int *bref = p;
+ __le32 *bref = p;
while (bref < p+max) {
- if (unlikely(*bref >= maxblocks)) {
+ if (unlikely(le32_to_cpu(*bref) >= maxblocks)) {
ext4_error(inode->i_sb, function,
"block reference %u >= max (%u) "
"in inode #%lu, offset=%d",
- *bref, maxblocks,
+ le32_to_cpu(*bref), maxblocks,
inode->i_ino, (int)(bref-p));
return -EIO;
}
int retval;
clear_buffer_mapped(bh);
+ clear_buffer_unwritten(bh);
/*
* Try to see if we can get the block without requesting
if (retval > 0 && buffer_mapped(bh))
return retval;
+ /*
+ * When we call get_blocks without the create flag, the
+ * BH_Unwritten flag could have gotten set if the blocks
+ * requested were part of a uninitialized extent. We need to
+ * clear this flag now that we are committed to convert all or
+ * part of the uninitialized extent to be an initialized
+ * extent. This is because we need to avoid the combination
+ * of BH_Unwritten and BH_Mapped flags being simultaneously
+ * set on the buffer_head.
+ */
+ clear_buffer_unwritten(bh);
+
/*
* New blocks allocate and/or writing to uninitialized extent
* will possibly result in updating i_data, so we take
struct buffer_head *bh_result, int create)
{
int ret = 0;
+ sector_t invalid_block = ~((sector_t) 0xffff);
+
+ if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+ invalid_block = ~0;
BUG_ON(create == 0);
BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
/* not enough space to reserve */
return ret;
- map_bh(bh_result, inode->i_sb, 0);
+ map_bh(bh_result, inode->i_sb, invalid_block);
set_buffer_new(bh_result);
set_buffer_delay(bh_result);
} else if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
+ /*
+ * With sub-block writes into unwritten extents
+ * we also need to mark the buffer as new so that
+ * the unwritten parts of the buffer gets correctly zeroed.
+ */
+ if (buffer_unwritten(bh_result))
+ set_buffer_new(bh_result);
ret = 0;
}
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
- if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
- cpu_to_le32(EXT4_OS_HURD)) {
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT))
ei->i_file_acl |=
((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
- }
inode->i_size = ext4_isize(raw_inode);
ei->i_disksize = inode->i_size;
inode->i_generation = le32_to_cpu(raw_inode->i_generation);
(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
}
- if (ei->i_flags & EXT4_EXTENTS_FL) {
- /* Validate extent which is part of inode */
- ret = ext4_ext_check_inode(inode);
+ ret = 0;
+ if (ei->i_file_acl &&
+ ((ei->i_file_acl <
+ (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
+ EXT4_SB(sb)->s_gdb_count)) ||
+ (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
+ ext4_error(sb, __func__,
+ "bad extended attribute block %llu in inode #%lu",
+ ei->i_file_acl, inode->i_ino);
+ ret = -EIO;
+ goto bad_inode;
+ } else if (ei->i_flags & EXT4_EXTENTS_FL) {
+ if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ (S_ISLNK(inode->i_mode) &&
+ !ext4_inode_is_fast_symlink(inode)))
+ /* Validate extent which is part of inode */
+ ret = ext4_ext_check_inode(inode);
} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
(S_ISLNK(inode->i_mode) &&
!ext4_inode_is_fast_symlink(inode))) {
if (EXT4_BLOCKS_PER_GROUP(sb) == 0)
goto cantfind_ext4;
+ /* check blocks count against device size */
+ blocks_count = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
+ if (blocks_count && ext4_blocks_count(es) > blocks_count) {
+ printk(KERN_WARNING "EXT4-fs: bad geometry: block count %llu "
+ "exceeds size of device (%llu blocks)\n",
+ ext4_blocks_count(es), blocks_count);
+ goto failed_mount;
+ }
+
/*
* It makes no sense for the first data block to be beyond the end
* of the filesystem.
Note that "utf8" is not recommended for FAT filesystems.
If unsure, you shouldn't set "utf8" here.
See <file:Documentation/filesystems/vfat.txt> for more information.
+
+ Enable any character sets you need in File Systems/Native Language
+ Support.
{
if (unlikely(newfd == oldfd)) { /* corner case */
struct files_struct *files = current->files;
+ int retval = oldfd;
+
rcu_read_lock();
if (!fcheck_files(files, oldfd))
- oldfd = -EBADF;
+ retval = -EBADF;
rcu_read_unlock();
- return oldfd;
+ return retval;
}
return sys_dup3(oldfd, newfd, 0);
}
return retval;
}
-int get_filesystem_list(char * buf)
+int __init get_filesystem_list(char *buf)
{
int len = 0;
struct file_system_type * tmp;
#define FSCACHE_MAX_THREADS 32
/*
- * fsc-cache.c
+ * cache.c
*/
extern struct list_head fscache_cache_list;
extern struct rw_semaphore fscache_addremove_sem;
struct fscache_cookie *);
/*
- * fsc-cookie.c
+ * cookie.c
*/
extern struct kmem_cache *fscache_cookie_jar;
extern void __fscache_cookie_put(struct fscache_cookie *);
/*
- * fsc-fsdef.c
+ * fsdef.c
*/
extern struct fscache_cookie fscache_fsdef_index;
extern struct fscache_cookie_def fscache_fsdef_netfs_def;
/*
- * fsc-histogram.c
+ * histogram.c
*/
#ifdef CONFIG_FSCACHE_HISTOGRAM
extern atomic_t fscache_obj_instantiate_histogram[HZ];
#endif
/*
- * fsc-main.c
+ * main.c
*/
extern unsigned fscache_defer_lookup;
extern unsigned fscache_defer_create;
extern int fscache_wait_bit_interruptible(void *);
/*
- * fsc-object.c
+ * object.c
*/
extern void fscache_withdrawing_object(struct fscache_cache *,
struct fscache_object *);
extern void fscache_enqueue_object(struct fscache_object *);
/*
- * fsc-operation.c
+ * operation.c
*/
extern int fscache_submit_exclusive_op(struct fscache_object *,
struct fscache_operation *);
extern void fscache_operation_gc(struct work_struct *);
/*
- * fsc-proc.c
+ * proc.c
*/
#ifdef CONFIG_PROC_FS
extern int __init fscache_proc_init(void);
#endif
/*
- * fsc-stats.c
+ * stats.c
*/
#ifdef CONFIG_FSCACHE_STATS
extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS];
}
static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
- unsigned *nbytesp, int write)
+ size_t *nbytesp, int write)
{
- unsigned nbytes = *nbytesp;
+ size_t nbytes = *nbytesp;
unsigned long user_addr = (unsigned long) buf;
unsigned offset = user_addr & ~PAGE_MASK;
int npages;
return 0;
}
- nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
+ nbytes = min_t(size_t, nbytes, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
down_read(¤t->mm->mmap_sem);
if (vma->vm_flags & VM_MAYSHARE)
return -ENODEV;
+ invalidate_inode_pages2(file->f_mapping);
+
return generic_file_mmap(file, vma);
}
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/exportfs.h>
+#include <linux/smp_lock.h>
MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
MODULE_DESCRIPTION("Filesystem in Userspace");
static void fuse_umount_begin(struct super_block *sb)
{
+ lock_kernel();
fuse_abort_conn(get_fuse_conn_super(sb));
+ unlock_kernel();
}
static void fuse_send_destroy(struct fuse_conn *fc)
err_put_root:
dput(root_dentry);
err_put_conn:
+ bdi_destroy(&fc->bdi);
fuse_conn_put(fc);
err_fput:
fput(file);
GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
- down_read(&gfs2_umount_flush_sem);
if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_demote_state != gl->gl_state) {
if (find_first_holder(gl))
if (ret == 0)
goto out_unlock;
if (ret == 2)
- goto out_sem;
+ goto out;
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
do_error(gl, 0); /* Fail queued try locks */
}
do_xmote(gl, gh, gl->gl_target);
-out_sem:
- up_read(&gfs2_umount_flush_sem);
+out:
return;
out_sched:
gfs2_glock_put(gl);
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
- goto out_sem;
+ goto out;
}
static void glock_work_func(struct work_struct *work)
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags))
finish_xmote(gl, gl->gl_reply);
+ down_read(&gfs2_umount_flush_sem);
spin_lock(&gl->gl_spin);
if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
}
run_queue(gl, 0);
spin_unlock(&gl->gl_spin);
+ up_read(&gfs2_umount_flush_sem);
if (!delay ||
queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
nr--;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
+ got_ref = 0;
}
spin_lock(&lru_lock);
if (may_demote)
error = filemap_fdatawait(metamapping);
mapping_set_error(metamapping, error);
gfs2_ail_empty_gl(gl);
+ /*
+ * Writeback of the data mapping may cause the dirty flag to be set
+ * so we have to clear it again here.
+ */
+ smp_mb__before_clear_bit();
+ clear_bit(GLF_DIRTY, &gl->gl_flags);
}
/**
if (S_ISREG(mode)) {
inode->i_op = &gfs2_file_iops;
if (gfs2_localflocks(sdp))
- inode->i_fop = gfs2_file_fops_nolock;
+ inode->i_fop = &gfs2_file_fops_nolock;
else
- inode->i_fop = gfs2_file_fops;
+ inode->i_fop = &gfs2_file_fops;
} else if (S_ISDIR(mode)) {
inode->i_op = &gfs2_dir_iops;
if (gfs2_localflocks(sdp))
- inode->i_fop = gfs2_dir_fops_nolock;
+ inode->i_fop = &gfs2_dir_fops_nolock;
else
- inode->i_fop = gfs2_dir_fops;
+ inode->i_fop = &gfs2_dir_fops;
} else if (S_ISLNK(mode)) {
inode->i_op = &gfs2_symlink_iops;
} else {
extern const struct inode_operations gfs2_file_iops;
extern const struct inode_operations gfs2_dir_iops;
extern const struct inode_operations gfs2_symlink_iops;
-extern const struct file_operations *gfs2_file_fops_nolock;
-extern const struct file_operations *gfs2_dir_fops_nolock;
+extern const struct file_operations gfs2_file_fops_nolock;
+extern const struct file_operations gfs2_dir_fops_nolock;
extern void gfs2_set_inode_flags(struct inode *inode);
#ifdef CONFIG_GFS2_FS_LOCKING_DLM
-extern const struct file_operations *gfs2_file_fops;
-extern const struct file_operations *gfs2_dir_fops;
+extern const struct file_operations gfs2_file_fops;
+extern const struct file_operations gfs2_dir_fops;
+
static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
{
return sdp->sd_args.ar_localflocks;
}
#else /* Single node only */
-#define gfs2_file_fops NULL
-#define gfs2_dir_fops NULL
+#define gfs2_file_fops gfs2_file_fops_nolock
+#define gfs2_dir_fops gfs2_dir_fops_nolock
+
static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
{
return 1;
gfs2_glock_dq(&gh);
out:
gfs2_holder_uninit(&gh);
- if (ret)
+ if (ret == -ENOMEM)
+ ret = VM_FAULT_OOM;
+ else if (ret)
ret = VM_FAULT_SIGBUS;
return ret;
}
}
}
-const struct file_operations *gfs2_file_fops = &(const struct file_operations){
+const struct file_operations gfs2_file_fops = {
.llseek = gfs2_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.setlease = gfs2_setlease,
};
-const struct file_operations *gfs2_dir_fops = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops = {
.readdir = gfs2_readdir,
.unlocked_ioctl = gfs2_ioctl,
.open = gfs2_open,
#endif /* CONFIG_GFS2_FS_LOCKING_DLM */
-const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_file_fops_nolock = {
.llseek = gfs2_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.setlease = generic_setlease,
};
-const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops_nolock = {
.readdir = gfs2_readdir,
.unlocked_ioctl = gfs2_ioctl,
.open = gfs2_open,
lock_page(page);
bio = bio_alloc(GFP_NOFS, 1);
- if (unlikely(!bio)) {
- __free_page(page);
- return -ENOBUFS;
- }
-
bio->bi_sector = sector * (sb->s_blocksize >> 9);
bio->bi_bdev = sb->s_bdev;
bio_add_page(bio, page, PAGE_SIZE, 0);
static struct super_block *get_gfs2_sb(const char *dev_name)
{
struct super_block *sb;
- struct nameidata nd;
+ struct path path;
int error;
- error = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
+ error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
if (error) {
printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n",
dev_name, error);
return NULL;
}
- sb = nd.path.dentry->d_inode->i_sb;
+ sb = path.dentry->d_inode->i_sb;
if (sb && (sb->s_type == &gfs2_fs_type))
atomic_inc(&sb->s_active);
else
sb = NULL;
- path_put(&nd.path);
+ path_put(&path);
return sb;
}
ip = ghs[1].gh_gl->gl_object;
ip->i_disksize = size;
+ i_size_write(inode, size);
error = gfs2_meta_inode_buffer(ip, &dibh);
static LIST_HEAD(qd_lru_list);
static atomic_t qd_lru_count = ATOMIC_INIT(0);
-static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(qd_lru_lock);
int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
{
refrigerator();
t = min(quotad_timeo, statfs_timeo);
- prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE);
+ prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE);
spin_lock(&sdp->sd_trunc_lock);
empty = list_empty(&sdp->sd_trunc_list);
spin_unlock(&sdp->sd_trunc_lock);
if (tmp == 0)
return BFITNOENT;
ptr--;
- bit = fls64(tmp);
- bit--; /* fls64 always adds one to the bit count */
+ bit = __ffs64(tmp);
bit /= 2; /* two bits per entry in the bitmap */
return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit;
}
u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head *dibh;
struct gfs2_alloc *al = ip->i_alloc;
struct gfs2_rgrpd *rgd = al->al_rgd;
u32 goal, blk;
u64 block;
+ int error;
if (rgrp_contains_block(rgd, ip->i_goal))
goal = ip->i_goal - rgd->rd_data0;
rgd->rd_last_alloc = blk;
block = rgd->rd_data0 + blk;
ip->i_goal = block;
-
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error == 0) {
+ struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal);
+ brelse(dibh);
+ }
gfs2_assert_withdraw(sdp, rgd->rd_free >= *n);
rgd->rd_free -= *n;
BUG();
return 0;
}
+
+ if (!tree)
+ return 0;
+
if (tree->node_size >= PAGE_CACHE_SIZE) {
nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
spin_lock(&tree->hash_lock);
if (HFS_SB(sb)->nls_disk)
unload_nls(HFS_SB(sb)->nls_disk);
+ free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
kfree(HFS_SB(sb));
sb->s_fs_info = NULL;
}
if (!(*flags & MS_RDONLY)) mark_dirty(s);
- kfree(s->s_options);
- s->s_options = new_opts;
+ replace_mount_options(s, new_opts);
return 0;
#include <linux/pagevec.h>
#include <linux/parser.h>
#include <linux/mman.h>
-#include <linux/quotaops.h>
#include <linux/slab.h>
#include <linux/dnotify.h>
#include <linux/statfs.h>
return retval;
}
-/*
- * Read a page. Again trivial. If it didn't already exist
- * in the page cache, it is zero-filled.
- */
-static int hugetlbfs_readpage(struct file *file, struct page * page)
-{
- unlock_page(page);
- return -EINVAL;
-}
-
static int hugetlbfs_write_begin(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
}
static const struct address_space_operations hugetlbfs_aops = {
- .readpage = hugetlbfs_readpage,
.write_begin = hugetlbfs_write_begin,
.write_end = hugetlbfs_write_end,
.set_page_dirty = hugetlbfs_set_page_dirty,
bad_val:
printk(KERN_ERR "hugetlbfs: Bad value '%s' for mount option '%s'\n",
args[0].from, p);
- return 1;
+ return -EINVAL;
}
static int
*/
struct inodes_stat_t inodes_stat;
-static struct kmem_cache * inode_cachep __read_mostly;
+static struct kmem_cache *inode_cachep __read_mostly;
static void wake_up_inode(struct inode *inode)
{
static struct inode_operations empty_iops;
static const struct file_operations empty_fops;
- struct address_space * const mapping = &inode->i_data;
+ struct address_space *const mapping = &inode->i_data;
inode->i_sb = sb;
inode->i_blkbits = sb->s_blocksize_bits;
return NULL;
}
-void destroy_inode(struct inode *inode)
+void destroy_inode(struct inode *inode)
{
BUG_ON(inode_has_buffers(inode));
+ ima_inode_free(inode);
security_inode_free(inode);
if (inode->i_sb->s_op->destroy_inode)
inode->i_sb->s_op->destroy_inode(inode);
mutex_init(&inode->inotify_mutex);
#endif
}
-
EXPORT_SYMBOL(inode_init_once);
static void init_once(void *foo)
{
- struct inode * inode = (struct inode *) foo;
+ struct inode *inode = (struct inode *) foo;
inode_init_once(inode);
}
/*
* inode_lock must be held
*/
-void __iget(struct inode * inode)
+void __iget(struct inode *inode)
{
if (atomic_read(&inode->i_count)) {
atomic_inc(&inode->i_count);
{
might_sleep();
invalidate_inode_buffers(inode);
-
+
BUG_ON(inode->i_data.nrpages);
BUG_ON(!(inode->i_state & I_FREEING));
BUG_ON(inode->i_state & I_CLEAR);
cd_forget(inode);
inode->i_state = I_CLEAR;
}
-
EXPORT_SYMBOL(clear_inode);
/*
next = head->next;
for (;;) {
- struct list_head * tmp = next;
- struct inode * inode;
+ struct list_head *tmp = next;
+ struct inode *inode;
/*
* We can reschedule here without worrying about the list's
* fails because there are busy inodes then a non zero value is returned.
* If the discard is successful all the inodes have been discarded.
*/
-int invalidate_inodes(struct super_block * sb)
+int invalidate_inodes(struct super_block *sb)
{
int busy;
LIST_HEAD(throw_away);
return busy;
}
-
EXPORT_SYMBOL(invalidate_inodes);
static int can_unuse(struct inode *inode)
* Nasty deadlock avoidance. We may hold various FS locks,
* and we don't want to recurse into the FS that called us
* in clear_inode() and friends..
- */
+ */
if (!(gfp_mask & __GFP_FS))
return -1;
prune_icache(nr);
* by hand after calling find_inode now! This simplifies iunique and won't
* add any additional branch in the common code.
*/
-static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data)
+static struct inode *find_inode(struct super_block *sb,
+ struct hlist_head *head,
+ int (*test)(struct inode *, void *),
+ void *data)
{
struct hlist_node *node;
- struct inode * inode = NULL;
+ struct inode *inode = NULL;
repeat:
hlist_for_each_entry(inode, node, head, i_hash) {
* find_inode_fast is the fast path version of find_inode, see the comment at
* iget_locked for details.
*/
-static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino)
+static struct inode *find_inode_fast(struct super_block *sb,
+ struct hlist_head *head, unsigned long ino)
{
struct hlist_node *node;
- struct inode * inode = NULL;
+ struct inode *inode = NULL;
repeat:
hlist_for_each_entry(inode, node, head, i_hash) {
* here to attempt to avoid that.
*/
static unsigned int last_ino;
- struct inode * inode;
+ struct inode *inode;
spin_lock_prefetch(&inode_lock);
-
+
inode = alloc_inode(sb);
if (inode) {
spin_lock(&inode_lock);
}
return inode;
}
-
EXPORT_SYMBOL(new_inode);
void unlock_new_inode(struct inode *inode)
inode->i_state &= ~(I_LOCK|I_NEW);
wake_up_inode(inode);
}
-
EXPORT_SYMBOL(unlock_new_inode);
/*
* We no longer cache the sb_flags in i_flags - see fs.h
* -- rmk@arm.uk.linux.org
*/
-static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data)
+static struct inode *get_new_inode(struct super_block *sb,
+ struct hlist_head *head,
+ int (*test)(struct inode *, void *),
+ int (*set)(struct inode *, void *),
+ void *data)
{
- struct inode * inode;
+ struct inode *inode;
inode = alloc_inode(sb);
if (inode) {
- struct inode * old;
+ struct inode *old;
spin_lock(&inode_lock);
/* We released the lock, so.. */
* get_new_inode_fast is the fast path version of get_new_inode, see the
* comment at iget_locked for details.
*/
-static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino)
+static struct inode *get_new_inode_fast(struct super_block *sb,
+ struct hlist_head *head, unsigned long ino)
{
- struct inode * inode;
+ struct inode *inode;
inode = alloc_inode(sb);
if (inode) {
- struct inode * old;
+ struct inode *old;
spin_lock(&inode_lock);
/* We released the lock, so.. */
spin_unlock(&inode_lock);
return inode;
}
-
EXPORT_SYMBOL(igrab);
/**
return ifind(sb, head, test, data, 0);
}
-
EXPORT_SYMBOL(ilookup5_nowait);
/**
return ifind(sb, head, test, data, 1);
}
-
EXPORT_SYMBOL(ilookup5);
/**
return ifind_fast(sb, head, ino);
}
-
EXPORT_SYMBOL(ilookup);
/**
*/
return get_new_inode(sb, head, test, set, data);
}
-
EXPORT_SYMBOL(iget5_locked);
/**
*/
return get_new_inode_fast(sb, head, ino);
}
-
EXPORT_SYMBOL(iget_locked);
int insert_inode_locked(struct inode *inode)
struct super_block *sb = inode->i_sb;
ino_t ino = inode->i_ino;
struct hlist_head *head = inode_hashtable + hash(sb, ino);
- struct inode *old;
inode->i_state |= I_LOCK|I_NEW;
while (1) {
+ struct hlist_node *node;
+ struct inode *old = NULL;
spin_lock(&inode_lock);
- old = find_inode_fast(sb, head, ino);
- if (likely(!old)) {
+ hlist_for_each_entry(old, node, head, i_hash) {
+ if (old->i_ino != ino)
+ continue;
+ if (old->i_sb != sb)
+ continue;
+ if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ continue;
+ break;
+ }
+ if (likely(!node)) {
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
return 0;
iput(old);
}
}
-
EXPORT_SYMBOL(insert_inode_locked);
int insert_inode_locked4(struct inode *inode, unsigned long hashval,
{
struct super_block *sb = inode->i_sb;
struct hlist_head *head = inode_hashtable + hash(sb, hashval);
- struct inode *old;
inode->i_state |= I_LOCK|I_NEW;
while (1) {
+ struct hlist_node *node;
+ struct inode *old = NULL;
+
spin_lock(&inode_lock);
- old = find_inode(sb, head, test, data);
- if (likely(!old)) {
+ hlist_for_each_entry(old, node, head, i_hash) {
+ if (old->i_sb != sb)
+ continue;
+ if (!test(old, data))
+ continue;
+ if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ continue;
+ break;
+ }
+ if (likely(!node)) {
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
return 0;
iput(old);
}
}
-
EXPORT_SYMBOL(insert_inode_locked4);
/**
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(__insert_inode_hash);
/**
hlist_del_init(&inode->i_hash);
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(remove_inode_hash);
/*
BUG_ON(inode->i_state != I_CLEAR);
destroy_inode(inode);
}
-
EXPORT_SYMBOL(generic_delete_inode);
static void generic_forget_inode(struct inode *inode)
else
generic_forget_inode(inode);
}
-
EXPORT_SYMBOL_GPL(generic_drop_inode);
/*
* Called when we're dropping the last reference
- * to an inode.
+ * to an inode.
*
* Call the FS "drop()" function, defaulting to
* the legacy UNIX filesystem behaviour..
}
/**
- * iput - put an inode
+ * iput - put an inode
* @inode: inode to put
*
* Puts an inode, dropping its usage count. If the inode use count hits
iput_final(inode);
}
}
-
EXPORT_SYMBOL(iput);
/**
* Returns the block number on the device holding the inode that
* is the disk block number for the block of the file requested.
* That is, asked for block 4 of inode 1 the function will return the
- * disk block relative to the disk start that holds that block of the
+ * disk block relative to the disk start that holds that block of the
* file.
*/
-sector_t bmap(struct inode * inode, sector_t block)
+sector_t bmap(struct inode *inode, sector_t block)
{
sector_t res = 0;
if (inode->i_mapping->a_ops->bmap)
mark_inode_dirty_sync(inode);
mnt_drop_write(file->f_path.mnt);
}
-
EXPORT_SYMBOL(file_update_time);
int inode_needs_sync(struct inode *inode)
return 1;
return 0;
}
-
EXPORT_SYMBOL(inode_needs_sync);
int inode_wait(void *word)
spin_lock(&inode_lock);
}
-/*
- * We rarely want to lock two inodes that do not have a parent/child
- * relationship (such as directory, child inode) simultaneously. The
- * vast majority of file systems should be able to get along fine
- * without this. Do not use these functions except as a last resort.
- */
-void inode_double_lock(struct inode *inode1, struct inode *inode2)
-{
- if (inode1 == NULL || inode2 == NULL || inode1 == inode2) {
- if (inode1)
- mutex_lock(&inode1->i_mutex);
- else if (inode2)
- mutex_lock(&inode2->i_mutex);
- return;
- }
-
- if (inode1 < inode2) {
- mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD);
- } else {
- mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD);
- }
-}
-EXPORT_SYMBOL(inode_double_lock);
-
-void inode_double_unlock(struct inode *inode1, struct inode *inode2)
-{
- if (inode1)
- mutex_unlock(&inode1->i_mutex);
-
- if (inode2 && inode2 != inode1)
- mutex_unlock(&inode2->i_mutex);
-}
-EXPORT_SYMBOL(inode_double_unlock);
-
static __initdata unsigned long ihash_entries;
static int __init set_ihash_entries(char *str)
{
long long length = 0, map_len = 0;
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0;
+ int ret = 0, past_eof = 0, whole_file = 0;
if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
return ret;
start_blk = logical_to_blk(inode, start);
length = (long long)min_t(u64, len, i_size_read(inode));
+ if (length < len)
+ whole_file = 1;
+
map_len = length;
do {
/* HOLE */
if (!buffer_mapped(&tmp)) {
+ length -= blk_to_logical(inode, 1);
+ start_blk++;
+
+ /*
+ * we want to handle the case where there is an
+ * allocated block at the front of the file, and then
+ * nothing but holes up to the end of the file properly,
+ * to make sure that extent at the front gets properly
+ * marked with FIEMAP_EXTENT_LAST
+ */
+ if (!past_eof &&
+ blk_to_logical(inode, start_blk) >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
+
/*
* first hole after going past the EOF, this is our
* last extent
*/
- if (length <= 0) {
+ if (past_eof && size) {
flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
break;
}
- length -= blk_to_logical(inode, 1);
-
/* if we have holes up to/past EOF then we're done */
- if (length <= 0)
+ if (length <= 0 || past_eof)
break;
-
- start_blk++;
} else {
- if (length <= 0 && size) {
+ /*
+ * we have gone over the length of what we wanted to
+ * map, and it wasn't the entire file, so add the extent
+ * we got last time and exit.
+ *
+ * This is for the case where say we want to map all the
+ * way up to the second to the last block in a file, but
+ * the last block is a hole, making the second to last
+ * block FIEMAP_EXTENT_LAST. In this case we want to
+ * see if there is a hole after the second to last block
+ * so we can mark it properly. If we found data after
+ * we exceeded the length we were requesting, then we
+ * are good to go, just add the extent to the fieinfo
+ * and break
+ */
+ if (length <= 0 && !whole_file) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size,
+ flags);
+ break;
+ }
+
+ /*
+ * if size != 0 then we know we already have an extent
+ * to add, so add it.
+ */
+ if (size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
start_blk += logical_to_blk(inode, size);
/*
- * if we are past the EOF we need to loop again to see
- * if there is a hole so we can mark this extent as the
- * last one, and if not keep mapping things until we
- * find a hole, or we run out of slots in the extent
- * array
+ * If we are past the EOF, then we need to make sure as
+ * soon as we find a hole that the last extent we found
+ * is marked with FIEMAP_EXTENT_LAST
*/
- if (length <= 0)
- continue;
-
- ret = fiemap_fill_next_extent(fieinfo, logical, phys,
- size, flags);
- if (ret)
- break;
+ if (!past_eof &&
+ logical+size >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
}
cond_resched();
} while (1);
spin_lock(&journal->j_list_lock);
}
/* Someone already cleaned up the buffer? */
- if (!buffer_jbd(bh)
+ if (!buffer_jbd(bh) || bh2jh(bh) != jh
|| jh->b_transaction != commit_transaction
|| jh->b_jlist != BJ_SyncData) {
jbd_unlock_bh_state(bh);
spin_lock(&journal->j_list_lock);
continue;
}
- if (buffer_jbd(bh) && jh->b_jlist == BJ_Locked) {
+ if (buffer_jbd(bh) && bh2jh(bh) == jh &&
+ jh->b_transaction == commit_transaction &&
+ jh->b_jlist == BJ_Locked) {
__journal_unfile_buffer(jh);
jbd_unlock_bh_state(bh);
journal_remove_journal_head(bh);
err = 0;
}
- journal_write_revoke_records(journal, commit_transaction);
+ journal_write_revoke_records(journal, commit_transaction, write_op);
/*
* If we found any dirty or locked buffers, then we should have
* need do nothing.
* RevokeValid set, Revoked set:
* buffer has been revoked.
+ *
+ * Locking rules:
+ * We keep two hash tables of revoke records. One hashtable belongs to the
+ * running transaction (is pointed to by journal->j_revoke), the other one
+ * belongs to the committing transaction. Accesses to the second hash table
+ * happen only from the kjournald and no other thread touches this table. Also
+ * journal_switch_revoke_table() which switches which hashtable belongs to the
+ * running and which to the committing transaction is called only from
+ * kjournald. Therefore we need no locks when accessing the hashtable belonging
+ * to the committing transaction.
+ *
+ * All users operating on the hash table belonging to the running transaction
+ * have a handle to the transaction. Therefore they are safe from kjournald
+ * switching hash tables under them. For operations on the lists of entries in
+ * the hash table j_revoke_lock is used.
+ *
+ * Finally, also replay code uses the hash tables but at this moment noone else
+ * can touch them (filesystem isn't mounted yet) and hence no locking is
+ * needed.
*/
#ifndef __KERNEL__
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/bio.h>
#endif
#include <linux/log2.h>
#ifdef __KERNEL__
static void write_one_revoke_record(journal_t *, transaction_t *,
struct journal_head **, int *,
- struct jbd_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+ struct jbd_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
#endif
/* Utility functions to maintain the revoke table */
* the second time we would still have a pending revoke to cancel. So,
* do not trust the Revoked bit on buffers unless RevokeValid is also
* set.
- *
- * The caller must have the journal locked.
*/
int journal_cancel_revoke(handle_t *handle, struct journal_head *jh)
{
/*
* Write revoke records to the journal for all entries in the current
* revoke hash, deleting the entries as we go.
- *
- * Called with the journal lock held.
*/
-
void journal_write_revoke_records(journal_t *journal,
- transaction_t *transaction)
+ transaction_t *transaction, int write_op)
{
struct journal_head *descriptor;
struct jbd_revoke_record_s *record;
hash_list->next;
write_one_revoke_record(journal, transaction,
&descriptor, &offset,
- record);
+ record, write_op);
count++;
list_del(&record->hash);
kmem_cache_free(revoke_record_cache, record);
}
}
if (descriptor)
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
jbd_debug(1, "Wrote %d revoke records\n", count);
}
transaction_t *transaction,
struct journal_head **descriptorp,
int *offsetp,
- struct jbd_revoke_record_s *record)
+ struct jbd_revoke_record_s *record,
+ int write_op)
{
struct journal_head *descriptor;
int offset;
/* Make sure we have a descriptor with space left for the record */
if (descriptor) {
if (offset == journal->j_blocksize) {
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
descriptor = NULL;
}
}
static void flush_descriptor(journal_t *journal,
struct journal_head *descriptor,
- int offset)
+ int offset, int write_op)
{
journal_revoke_header_t *header;
struct buffer_head *bh = jh2bh(descriptor);
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
}
#endif
if (err)
jbd2_journal_abort(journal, err);
- jbd2_journal_write_revoke_records(journal, commit_transaction);
+ jbd2_journal_write_revoke_records(journal, commit_transaction,
+ write_op);
jbd_debug(3, "JBD: commit phase 2\n");
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/bio.h>
#endif
#include <linux/log2.h>
#ifdef __KERNEL__
static void write_one_revoke_record(journal_t *, transaction_t *,
struct journal_head **, int *,
- struct jbd2_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+ struct jbd2_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
#endif
/* Utility functions to maintain the revoke table */
* revoke hash, deleting the entries as we go.
*/
void jbd2_journal_write_revoke_records(journal_t *journal,
- transaction_t *transaction)
+ transaction_t *transaction,
+ int write_op)
{
struct journal_head *descriptor;
struct jbd2_revoke_record_s *record;
hash_list->next;
write_one_revoke_record(journal, transaction,
&descriptor, &offset,
- record);
+ record, write_op);
count++;
list_del(&record->hash);
kmem_cache_free(jbd2_revoke_record_cache, record);
}
}
if (descriptor)
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
jbd_debug(1, "Wrote %d revoke records\n", count);
}
transaction_t *transaction,
struct journal_head **descriptorp,
int *offsetp,
- struct jbd2_revoke_record_s *record)
+ struct jbd2_revoke_record_s *record,
+ int write_op)
{
struct journal_head *descriptor;
int offset;
/* Make sure we have a descriptor with space left for the record */
if (descriptor) {
if (offset == journal->j_blocksize) {
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
descriptor = NULL;
}
}
static void flush_descriptor(journal_t *journal,
struct journal_head *descriptor,
- int offset)
+ int offset, int write_op)
{
jbd2_journal_revoke_header_t *header;
struct buffer_head *bh = jh2bh(descriptor);
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
}
#endif
return;
filebad:
- mutex_lock(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- /* Stick it on a list (any list) so erase_failed can take it
- right off again. Silly, but shouldn't happen often. */
- list_move(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
- mutex_unlock(&c->erase_free_sem);
jffs2_erase_failed(c, jeb, bad_offset);
return;
return 0;
Enomem:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return -ENOMEM;
}
schedule_delayed_work(&grace_period_end, grace_period);
}
+static void restart_grace(void)
+{
+ if (nlmsvc_ops) {
+ cancel_delayed_work_sync(&grace_period_end);
+ locks_end_grace(&lockd_manager);
+ nlmsvc_invalidate_all();
+ set_grace_period();
+ }
+}
+
/*
* This is the lockd kernel thread
*/
if (signalled()) {
flush_signals(current);
- if (nlmsvc_ops) {
- nlmsvc_invalidate_all();
- set_grace_period();
- }
+ restart_grace();
continue;
}
* @nd: pointer to nameidata
* @open_flags: open intent flags
*/
-int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags,
- struct nameidata *nd, int open_flags)
+static int path_lookup_open(int dfd, const char *name,
+ unsigned int lookup_flags, struct nameidata *nd, int open_flags)
{
struct file *filp = get_empty_filp();
int err;
int err;
struct qstr this;
+ WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
+
err = __lookup_one_len(name, &this, base, len);
if (err)
return ERR_PTR(err);
* open_to_namei_flags() for more details.
*/
struct file *do_filp_open(int dfd, const char *pathname,
- int open_flag, int mode)
+ int open_flag, int mode, int acc_mode)
{
struct file *filp;
struct nameidata nd;
- int acc_mode, error;
+ int error;
struct path path;
struct dentry *dir;
int count = 0;
int will_write;
int flag = open_to_namei_flags(open_flag);
- acc_mode = MAY_OPEN | ACC_MODE(flag);
+ if (!acc_mode)
+ acc_mode = MAY_OPEN | ACC_MODE(flag);
/* O_TRUNC implies we need access checks for write permissions */
if (flag & O_TRUNC)
*/
struct file *filp_open(const char *filename, int flags, int mode)
{
- return do_filp_open(AT_FDCWD, filename, flags, mode);
+ return do_filp_open(AT_FDCWD, filename, flags, mode, 0);
}
EXPORT_SYMBOL(filp_open);
*/
int generic_show_options(struct seq_file *m, struct vfsmount *mnt)
{
- const char *options = mnt->mnt_sb->s_options;
+ const char *options;
+
+ rcu_read_lock();
+ options = rcu_dereference(mnt->mnt_sb->s_options);
if (options != NULL && options[0]) {
seq_putc(m, ',');
mangle(m, options);
}
+ rcu_read_unlock();
return 0;
}
*/
void save_mount_options(struct super_block *sb, char *options)
{
- kfree(sb->s_options);
- sb->s_options = kstrdup(options, GFP_KERNEL);
+ BUG_ON(sb->s_options);
+ rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL));
}
EXPORT_SYMBOL(save_mount_options);
+void replace_mount_options(struct super_block *sb, char *options)
+{
+ char *old = sb->s_options;
+ rcu_assign_pointer(sb->s_options, options);
+ if (old) {
+ synchronize_rcu();
+ kfree(old);
+ }
+}
+EXPORT_SYMBOL(replace_mount_options);
+
#ifdef CONFIG_PROC_FS
/* iterator */
static void *m_start(struct seq_file *m, loff_t *pos)
*/
if (flags & MNT_FORCE && sb->s_op->umount_begin) {
- lock_kernel();
sb->s_op->umount_begin(sb);
- unlock_kernel();
}
/*
if (parent_path) {
detach_mnt(source_mnt, parent_path);
attach_mnt(source_mnt, path);
- touch_mnt_namespace(current->nsproxy->mnt_ns);
+ touch_mnt_namespace(parent_path->mnt->mnt_ns);
} else {
mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
commit_tree(source_mnt);
if (data_page)
((char *)data_page)[PAGE_SIZE - 1] = 0;
- /* Default to relatime */
- mnt_flags |= MNT_RELATIME;
+ /* Default to relatime unless overriden */
+ if (!(flags & MS_NOATIME))
+ mnt_flags |= MNT_RELATIME;
/* Separate the per-mountpoint flags */
if (flags & MS_NOSUID)
if (user.object_name_len > NCP_OBJECT_NAME_MAX_LEN)
return -ENOMEM;
if (user.object_name_len) {
- newname = kmalloc(user.object_name_len, GFP_USER);
- if (!newname)
- return -ENOMEM;
- if (copy_from_user(newname, user.object_name, user.object_name_len)) {
- kfree(newname);
- return -EFAULT;
- }
+ newname = memdup_user(user.object_name,
+ user.object_name_len);
+ if (IS_ERR(newname))
+ return PTR_ERR(newname);
} else {
newname = NULL;
}
if (user.len > NCP_PRIVATE_DATA_MAX_LEN)
return -ENOMEM;
if (user.len) {
- new = kmalloc(user.len, GFP_USER);
- if (!new)
- return -ENOMEM;
- if (copy_from_user(new, user.data, user.len)) {
- kfree(new);
- return -EFAULT;
- }
+ new = memdup_user(user.data, user.len);
+ if (IS_ERR(new))
+ return PTR_ERR(new);
} else {
new = NULL;
}
case S_IFREG:
/* NFSv4 has atomic_open... */
if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
- && (mask & MAY_OPEN))
+ && (mask & MAY_OPEN)
+ && !(mask & MAY_EXEC))
goto out;
break;
case S_IFDIR:
ret = nfs_updatepage(filp, page, 0, pagelen);
out_unlock:
+ if (!ret)
+ return VM_FAULT_LOCKED;
unlock_page(page);
- if (ret)
- ret = VM_FAULT_SIGBUS;
- return ret;
+ return VM_FAULT_SIGBUS;
}
static struct vm_operations_struct nfs_file_vm_ops = {
if (args->npages != 0)
xdr_encode_pages(buf, args->pages, 0, args->len);
else
- req->rq_slen += args->len;
+ req->rq_slen = xdr_adjust_iovec(req->rq_svec,
+ p + XDR_QUADLEN(args->len));
err = nfsacl_encode(buf, base, args->inode,
(args->mask & NFS_ACL) ?
unsigned long timestamp = (unsigned long)data;
if (task->tk_status < 0) {
- switch (task->tk_status) {
- case -NFS4ERR_STALE_CLIENTID:
- case -NFS4ERR_EXPIRED:
- case -NFS4ERR_CB_PATH_DOWN:
- nfs4_schedule_state_recovery(clp);
- }
+ /* Unless we're shutting down, schedule state recovery! */
+ if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0)
+ nfs4_schedule_state_recovery(clp);
return;
}
spin_lock(&clp->cl_lock);
Opt_err
};
-static match_table_t __initconst tokens = {
+static const match_table_t tokens __initconst = {
{Opt_port, "port=%u"},
{Opt_rsize, "rsize=%u"},
{Opt_wsize, "wsize=%u"},
*/
static void nfs_umount_begin(struct super_block *sb)
{
- struct nfs_server *server = NFS_SB(sb);
+ struct nfs_server *server;
struct rpc_clnt *rpc;
+ lock_kernel();
+
+ server = NFS_SB(sb);
/* -EIO all pending I/O */
rpc = server->client_acl;
if (!IS_ERR(rpc))
rpc = server->client;
if (!IS_ERR(rpc))
rpc_killall_tasks(rpc);
+
+ unlock_kernel();
}
/*
error_splat_root:
dput(mntroot);
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto out;
}
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error);
return error;
}
error_splat_root:
dput(mntroot);
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto out;
}
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error);
return error;
}
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error);
return error;
}
goto out;
status = vfs_readdir(filp, nfsd4_build_namelist, &names);
fput(filp);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
dentry = lookup_one_len(entry->name, dir, HEXDIR_LEN-1);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
- goto out;
+ break;
}
status = f(dir, dentry);
dput(dentry);
if (status)
- goto out;
+ break;
list_del(&entry->list);
kfree(entry);
}
+ mutex_unlock(&dir->d_inode->i_mutex);
out:
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
return status;
}
-static int
-nfsd4_remove_clid_file(struct dentry *dir, struct dentry *dentry)
-{
- int status;
-
- if (!S_ISREG(dir->d_inode->i_mode)) {
- printk("nfsd4: non-file found in client recovery directory\n");
- return -EINVAL;
- }
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- status = vfs_unlink(dir->d_inode, dentry);
- mutex_unlock(&dir->d_inode->i_mutex);
- return status;
-}
-
-static int
-nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry)
-{
- int status;
-
- /* For now this directory should already be empty, but we empty it of
- * any regular files anyway, just in case the directory was created by
- * a kernel from the future.... */
- nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- status = vfs_rmdir(dir->d_inode, dentry);
- mutex_unlock(&dir->d_inode->i_mutex);
- return status;
-}
-
static int
nfsd4_unlink_clid_dir(char *name, int namlen)
{
dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name);
- mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+ mutex_lock_nested(&rec_dir.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
dentry = lookup_one_len(name, rec_dir.dentry, namlen);
- mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
- return status;
+ goto out_unlock;
}
status = -ENOENT;
if (!dentry->d_inode)
goto out;
-
- status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry);
+ status = vfs_rmdir(rec_dir.dentry->d_inode, dentry);
out:
dput(dentry);
+out_unlock:
+ mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
return status;
}
if (nfs4_has_reclaimed_state(child->d_name.name, false))
return 0;
- status = nfsd4_clear_clid_dir(parent, child);
+ status = vfs_rmdir(parent->d_inode, child);
if (status)
printk("failed to remove client recovery directory %s\n",
child->d_name.name);
struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry;
nfsd4_release_respages(e->ce_respages, e->ce_resused);
}
- kfree(ses->se_slots);
kfree(ses);
}
dentry = lookup_one_len(name, cd->rd_fhp->fh_dentry, namlen);
if (IS_ERR(dentry))
return nfserrno(PTR_ERR(dentry));
+ if (!dentry->d_inode) {
+ /*
+ * nfsd_buffered_readdir drops the i_mutex between
+ * readdir and calling this callback, leaving a window
+ * where this directory entry could have gone away.
+ */
+ dput(dentry);
+ return nfserr_noent;
+ }
exp_get(exp);
/*
struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);
int buflen;
__be32 *p = cd->buffer;
+ __be32 *cookiep;
__be32 nfserr = nfserr_toosmall;
/* In nfsv4, "." and ".." never make it onto the wire.. */
goto fail;
*p++ = xdr_one; /* mark entry present */
- cd->offset = p; /* remember pointer */
+ cookiep = p;
p = xdr_encode_hyper(p, NFS_OFFSET_MAX); /* offset of next entry */
p = xdr_encode_array(p, name, namlen); /* name length & name */
goto fail;
case nfserr_dropit:
goto fail;
+ case nfserr_noent:
+ goto skip_entry;
default:
/*
* If the client requested the RDATTR_ERROR attribute,
}
cd->buflen -= (p - cd->buffer);
cd->buffer = p;
+ cd->offset = cookiep;
+skip_entry:
cd->common.err = nfs_ok;
return 0;
fail:
}
if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
/* successfully crossed mount point */
- exp_put(exp);
- *expp = exp2;
+ /*
+ * This is subtle: dentry is *not* under mnt at this point.
+ * The only reason we are safe is that original mnt is pinned
+ * down by exp, so we should dput before putting exp.
+ */
dput(dentry);
*dpp = mounts;
+ exp_put(exp);
+ *expp = exp2;
} else {
exp_put(exp2);
dput(mounts);
host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
set_fs(oldfs);
if (host_err >= 0) {
+ *cnt = host_err;
nfsdstats.io_write += host_err;
fsnotify_modify(file->f_path.dentry);
}
}
dprintk("nfsd: write complete host_err=%d\n", host_err);
- if (host_err >= 0) {
+ if (host_err >= 0)
err = 0;
- *cnt = host_err;
- } else
+ else
err = nfserrno(host_err);
out:
return err;
return 0;
}
-static int nfsd_buffered_readdir(struct file *file, filldir_t func,
- struct readdir_cd *cdp, loff_t *offsetp)
+static __be32 nfsd_buffered_readdir(struct file *file, filldir_t func,
+ struct readdir_cd *cdp, loff_t *offsetp)
{
struct readdir_data buf;
struct buffered_dirent *de;
buf.dirent = (void *)__get_free_page(GFP_KERNEL);
if (!buf.dirent)
- return -ENOMEM;
+ return nfserrno(-ENOMEM);
offset = *offsetp;
while (1) {
+ struct inode *dir_inode = file->f_path.dentry->d_inode;
unsigned int reclen;
cdp->err = nfserr_eof; /* will be cleared on successful read */
if (!size)
break;
+ /*
+ * Various filldir functions may end up calling back into
+ * lookup_one_len() and the file system's ->lookup() method.
+ * These expect i_mutex to be held, as it would within readdir.
+ */
+ host_err = mutex_lock_killable(&dir_inode->i_mutex);
+ if (host_err)
+ break;
+
de = (struct buffered_dirent *)buf.dirent;
while (size > 0) {
offset = de->offset;
if (func(cdp, de->name, de->namlen, de->offset,
de->ino, de->d_type))
- goto done;
+ break;
if (cdp->err != nfs_ok)
- goto done;
+ break;
reclen = ALIGN(sizeof(*de) + de->namlen,
sizeof(u64));
size -= reclen;
de = (struct buffered_dirent *)((char *)de + reclen);
}
+ mutex_unlock(&dir_inode->i_mutex);
+ if (size > 0) /* We bailed out early */
+ break;
+
offset = vfs_llseek(file, 0, SEEK_CUR);
}
- done:
free_page((unsigned long)(buf.dirent));
if (host_err)
.bpop_translate = NULL,
};
+static struct lock_class_key nilfs_bmap_dat_lock_key;
+
/**
* nilfs_bmap_read - read a bmap from an inode
* @bmap: bmap
bmap->b_pops = &nilfs_bmap_ptr_ops_p;
bmap->b_last_allocated_key = 0; /* XXX: use macro */
bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT;
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
break;
case NILFS_CPFILE_INO:
case NILFS_SUFILE_INO:
{
memcpy(gcbmap, bmap, sizeof(union nilfs_bmap_union));
init_rwsem(&gcbmap->b_sem);
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
gcbmap->b_inode = &NILFS_BMAP_I(gcbmap)->vfs_inode;
}
{
memcpy(bmap, gcbmap, sizeof(union nilfs_bmap_union));
init_rwsem(&bmap->b_sem);
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
}
ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
if (ret < 0) {
if (ret != -ENOENT)
- goto out_sem;
+ goto out_header;
/* skip hole */
ret = 0;
continue;
continue;
printk(KERN_ERR "%s: cannot delete block\n",
__func__);
- goto out_sem;
+ goto out_header;
}
}
nilfs_mdt_mark_dirty(cpfile);
kunmap_atomic(kaddr, KM_USER0);
}
+
+ out_header:
brelse(header_bh);
out_sem:
#include <linux/smp_lock.h> /* lock_kernel(), unlock_kernel() */
#include <linux/capability.h> /* capable() */
#include <linux/uaccess.h> /* copy_from_user(), copy_to_user() */
+#include <linux/vmalloc.h>
#include <linux/nilfs2_fs.h>
#include "nilfs.h"
#include "segment.h"
nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
- nmembs);
-}
-
-static int nilfs_ioctl_get_cpinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_cpinfo);
+ ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
+ nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
-}
-
-static int nilfs_ioctl_get_suinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_suinfo);
+ ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
-}
-
-static int nilfs_ioctl_get_vinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_vinfo);
+ ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
struct nilfs_bdesc *bdescs = buf;
int ret, i;
+ down_read(&nilfs->ns_segctor_sem);
for (i = 0; i < nmembs; i++) {
ret = nilfs_bmap_lookup_at_level(bmap,
bdescs[i].bd_offset,
bdescs[i].bd_level + 1,
&bdescs[i].bd_blocknr);
if (ret < 0) {
- if (ret != -ENOENT)
+ if (ret != -ENOENT) {
+ up_read(&nilfs->ns_segctor_sem);
return ret;
+ }
bdescs[i].bd_blocknr = 0;
}
}
+ up_read(&nilfs->ns_segctor_sem);
return nmembs;
}
if (copy_from_user(&argv, argp, sizeof(argv)))
return -EFAULT;
- down_read(&nilfs->ns_segctor_sem);
+ if (argv.v_size != sizeof(struct nilfs_bdesc))
+ return -EINVAL;
+
ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
nilfs_ioctl_do_get_bdescs);
- up_read(&nilfs->ns_segctor_sem);
if (ret < 0)
return ret;
return 0;
}
-static ssize_t
-nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *inode;
struct nilfs_vdesc *vdesc;
struct buffer_head *bh, *n;
return ret;
}
-static inline int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_move_blocks);
-}
-
-static ssize_t
-nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
- int flags, void *buf, size_t size,
- size_t nmembs)
+static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *cpfile = nilfs->ns_cpfile;
struct nilfs_period *periods = buf;
int ret, i;
return nmembs;
}
-static inline int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
+static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_delete_checkpoints);
-}
+ size_t nmembs = argv->v_nmembs;
+ int ret;
-static ssize_t
-nilfs_ioctl_do_free_vblocknrs(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
-{
- int ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
+ ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
return (ret < 0) ? ret : nmembs;
}
-static inline int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_free_vblocknrs);
-}
-
-static ssize_t
-nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
- int flags, void *buf, size_t size,
- size_t nmembs)
+static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *dat = nilfs_dat_inode(nilfs);
struct nilfs_bmap *bmap = NILFS_I(dat)->i_bmap;
struct nilfs_bdesc *bdescs = buf;
return nmembs;
}
-static inline int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
+static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_mark_blocks_dirty);
-}
-
-static ssize_t
-nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
-{
- struct nilfs_sb_info *sbi = nilfs_get_writer(nilfs);
+ size_t nmembs = argv->v_nmembs;
+ struct nilfs_sb_info *sbi = nilfs->ns_writer;
int ret;
- if (unlikely(!sbi))
+ if (unlikely(!sbi)) {
+ /* never happens because called for a writable mount */
+ WARN_ON(1);
return -EROFS;
+ }
ret = nilfs_segctor_add_segments_to_be_freed(
NILFS_SC(sbi), buf, nmembs);
- nilfs_put_writer(nilfs);
return (ret < 0) ? ret : nmembs;
}
-static inline int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_free_segments);
-}
-
int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
- void __user *argp)
+ struct nilfs_argv *argv, void **kbufs)
{
- struct nilfs_argv argv[5];
const char *msg;
- int dir, ret;
-
- if (copy_from_user(argv, argp, sizeof(argv)))
- return -EFAULT;
+ int ret;
- dir = _IOC_WRITE;
- ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], dir);
+ ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
if (ret < 0) {
msg = "cannot read source blocks";
goto failed;
}
- ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], dir);
+
+ ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]);
if (ret < 0) {
/*
* can safely abort because checkpoints can be removed
msg = "cannot delete checkpoints";
goto failed;
}
- ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], dir);
+ ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], kbufs[2]);
if (ret < 0) {
/*
* can safely abort because DAT file is updated atomically
msg = "cannot delete virtual blocks from DAT file";
goto failed;
}
- ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], dir);
+ ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], kbufs[3]);
if (ret < 0) {
/*
* can safely abort because the operation is nondestructive.
msg = "cannot mark copying blocks dirty";
goto failed;
}
- ret = nilfs_ioctl_free_segments(nilfs, &argv[4], dir);
+ ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
if (ret < 0) {
/*
* can safely abort because this operation is atomic.
static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
unsigned int cmd, void __user *argp)
{
+ struct nilfs_argv argv[5];
+ const static size_t argsz[5] = {
+ sizeof(struct nilfs_vdesc),
+ sizeof(struct nilfs_period),
+ sizeof(__u64),
+ sizeof(struct nilfs_bdesc),
+ sizeof(__u64),
+ };
+ void __user *base;
+ void *kbufs[5];
+ struct the_nilfs *nilfs;
+ size_t len, nsegs;
+ int n, ret;
+
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- return nilfs_clean_segments(inode->i_sb, argp);
+
+ if (copy_from_user(argv, argp, sizeof(argv)))
+ return -EFAULT;
+
+ nsegs = argv[4].v_nmembs;
+ if (argv[4].v_size != argsz[4])
+ return -EINVAL;
+ /*
+ * argv[4] points to segment numbers this ioctl cleans. We
+ * use kmalloc() for its buffer because memory used for the
+ * segment numbers is enough small.
+ */
+ kbufs[4] = memdup_user((void __user *)(unsigned long)argv[4].v_base,
+ nsegs * sizeof(__u64));
+ if (IS_ERR(kbufs[4]))
+ return PTR_ERR(kbufs[4]);
+
+ nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+
+ for (n = 0; n < 4; n++) {
+ ret = -EINVAL;
+ if (argv[n].v_size != argsz[n])
+ goto out_free;
+
+ if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
+ goto out_free;
+
+ len = argv[n].v_size * argv[n].v_nmembs;
+ base = (void __user *)(unsigned long)argv[n].v_base;
+ if (len == 0) {
+ kbufs[n] = NULL;
+ continue;
+ }
+
+ kbufs[n] = vmalloc(len);
+ if (!kbufs[n]) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+ if (copy_from_user(kbufs[n], base, len)) {
+ ret = -EFAULT;
+ vfree(kbufs[n]);
+ goto out_free;
+ }
+ }
+
+ ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+
+ out_free:
+ while (--n >= 0)
+ vfree(kbufs[n]);
+ kfree(kbufs[4]);
+ return ret;
}
static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
return 0;
}
+static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
+ unsigned int cmd, void __user *argp,
+ size_t membsz,
+ ssize_t (*dofunc)(struct the_nilfs *,
+ __u64 *, int,
+ void *, size_t, size_t))
+
+{
+ struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+ struct nilfs_argv argv;
+ int ret;
+
+ if (copy_from_user(&argv, argp, sizeof(argv)))
+ return -EFAULT;
+
+ if (argv.v_size != membsz)
+ return -EINVAL;
+
+ ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
+ if (ret < 0)
+ return ret;
+
+ if (copy_to_user(argp, &argv, sizeof(argv)))
+ ret = -EFAULT;
+ return ret;
+}
+
long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
case NILFS_IOCTL_DELETE_CHECKPOINT:
return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_CPINFO:
- return nilfs_ioctl_get_cpinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_cpinfo),
+ nilfs_ioctl_do_get_cpinfo);
case NILFS_IOCTL_GET_CPSTAT:
return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_SUINFO:
- return nilfs_ioctl_get_suinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_suinfo),
+ nilfs_ioctl_do_get_suinfo);
case NILFS_IOCTL_GET_SUSTAT:
return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_VINFO:
- /* XXX: rename to ??? */
- return nilfs_ioctl_get_vinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_vinfo),
+ nilfs_ioctl_do_get_vinfo);
case NILFS_IOCTL_GET_BDESCS:
return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
case NILFS_IOCTL_CLEAN_SEGMENTS:
void *))
{
struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs;
- struct nilfs_sb_info *writer = NULL;
struct super_block *sb = inode->i_sb;
struct nilfs_transaction_info ti;
struct buffer_head *bh;
int err;
if (!sb) {
- writer = nilfs_get_writer(nilfs);
- if (!writer) {
+ /*
+ * Make sure this function is not called from any
+ * read-only context.
+ */
+ if (!nilfs->ns_writer) {
+ WARN_ON(1);
err = -EROFS;
goto out;
}
- sb = writer->s_super;
+ sb = nilfs->ns_writer->s_super;
}
nilfs_transaction_begin(sb, &ti, 0);
err = nilfs_transaction_commit(sb);
else
nilfs_transaction_abort(sb);
- if (writer)
- nilfs_put_writer(nilfs);
out:
return err;
}
int err;
err = nilfs_bmap_delete(ii->i_bmap, block);
- if (likely(!err)) {
+ if (!err || err == -ENOENT) {
nilfs_mdt_mark_dirty(inode);
nilfs_mdt_forget_block(inode, block);
}
#include "bmap.h"
#include "bmap_union.h"
-/*
- * NILFS filesystem version
- */
-#define NILFS_VERSION "2.0.5"
-
/*
* nilfs inode data in memory
*/
/* ioctl.c */
long nilfs_ioctl(struct file *, unsigned int, unsigned long);
-int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, void __user *);
+int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, struct nilfs_argv *,
+ void **);
/* inode.c */
extern struct inode *nilfs_new_inode(struct inode *, int);
lock_buffer(bh);
clear_buffer_nilfs_volatile(bh);
- if (test_clear_buffer_dirty(bh) && nilfs_page_buffers_clean(page))
+ clear_buffer_dirty(bh);
+ if (nilfs_page_buffers_clean(page))
__nilfs_clear_page_dirty(page);
clear_buffer_uptodate(bh);
}
static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
+ struct nilfs_sb_info *sbi,
struct nilfs_recovery_info *ri)
{
struct list_head *head = &ri->ri_used_segments;
struct nilfs_segment_entry *ent, *n;
struct inode *sufile = nilfs->ns_sufile;
__u64 segnum[4];
- time_t mtime;
int err;
int i;
segnum[2] = ri->ri_segnum;
segnum[3] = ri->ri_nextnum;
+ nilfs_attach_writer(nilfs, sbi);
/*
* Releasing the next segment of the latest super root.
* The next segment is invalidated by this recovery.
* Collecting segments written after the latest super root.
* These are marked dirty to avoid being reallocated in the next write.
*/
- mtime = get_seconds();
list_for_each_entry_safe(ent, n, head, list) {
- if (ent->segnum == segnum[0]) {
- list_del(&ent->list);
- nilfs_free_segment_entry(ent);
- continue;
- }
- err = nilfs_open_segment_entry(ent, sufile);
- if (unlikely(err))
- goto failed;
- if (!nilfs_segment_usage_dirty(ent->raw_su)) {
- /* make the segment garbage */
- ent->raw_su->su_nblocks = cpu_to_le32(0);
- ent->raw_su->su_lastmod = cpu_to_le32(mtime);
- nilfs_segment_usage_set_dirty(ent->raw_su);
+ if (ent->segnum != segnum[0]) {
+ err = nilfs_sufile_scrap(sufile, ent->segnum);
+ if (unlikely(err))
+ goto failed;
}
list_del(&ent->list);
- nilfs_close_segment_entry(ent, sufile);
nilfs_free_segment_entry(ent);
}
nilfs->ns_pseg_offset = 0;
nilfs->ns_seg_seq = ri->ri_seq + 2;
nilfs->ns_nextnum = nilfs->ns_segnum = segnum[0];
- return 0;
failed:
/* No need to recover sufile because it will be destroyed on error */
+ nilfs_detach_writer(nilfs, sbi);
return err;
}
goto failed;
if (ri->ri_need_recovery == NILFS_RECOVERY_ROLLFORWARD_DONE) {
- err = nilfs_prepare_segment_for_recovery(nilfs, ri);
+ err = nilfs_prepare_segment_for_recovery(nilfs, sbi, ri);
if (unlikely(err)) {
printk(KERN_ERR "NILFS: Error preparing segments for "
"recovery.\n");
}
}
-int nilfs_clean_segments(struct super_block *sb, void __user *argp)
+int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
+ void **kbufs)
{
struct nilfs_sb_info *sbi = NILFS_SB(sb);
struct nilfs_sc_info *sci = NILFS_SC(sbi);
err = nilfs_init_gcdat_inode(nilfs);
if (unlikely(err))
goto out_unlock;
- err = nilfs_ioctl_prepare_clean_segments(nilfs, argp);
+ err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
if (unlikely(err))
goto out_unlock;
extern int nilfs_construct_dsync_segment(struct super_block *, struct inode *,
loff_t, loff_t);
extern void nilfs_flush_segment(struct super_block *, ino_t);
-extern int nilfs_clean_segments(struct super_block *, void __user *);
+extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
+ void **);
extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
__u64 *, size_t);
create, NULL, bhp);
}
+static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
+ u64 ncleanadd, u64 ndirtyadd)
+{
+ struct nilfs_sufile_header *header;
+ void *kaddr;
+
+ kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
+ header = kaddr + bh_offset(header_bh);
+ le64_add_cpu(&header->sh_ncleansegs, ncleanadd);
+ le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd);
+ kunmap_atomic(kaddr, KM_USER0);
+
+ nilfs_mdt_mark_buffer_dirty(header_bh);
+}
+
+int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
+ void (*dofunc)(struct inode *, __u64,
+ struct buffer_head *,
+ struct buffer_head *))
+{
+ struct buffer_head *header_bh, *bh;
+ int ret;
+
+ if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
+ printk(KERN_WARNING "%s: invalid segment number: %llu\n",
+ __func__, (unsigned long long)segnum);
+ return -EINVAL;
+ }
+ down_write(&NILFS_MDT(sufile)->mi_sem);
+
+ ret = nilfs_sufile_get_header_block(sufile, &header_bh);
+ if (ret < 0)
+ goto out_sem;
+
+ ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh);
+ if (!ret) {
+ dofunc(sufile, segnum, header_bh, bh);
+ brelse(bh);
+ }
+ brelse(header_bh);
+
+ out_sem:
+ up_write(&NILFS_MDT(sufile)->mi_sem);
+ return ret;
+}
+
/**
* nilfs_sufile_alloc - allocate a segment
* @sufile: inode of segment usage file
int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
{
struct buffer_head *header_bh, *su_bh;
- struct the_nilfs *nilfs;
struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
size_t susz = NILFS_MDT(sufile)->mi_entry_size;
down_write(&NILFS_MDT(sufile)->mi_sem);
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
ret = nilfs_sufile_get_header_block(sufile, &header_bh);
if (ret < 0)
goto out_sem;
return ret;
}
-/**
- * nilfs_sufile_cancel_free -
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description:
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, *su_bh;
- struct the_nilfs *nilfs;
- struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
void *kaddr;
- int ret;
-
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_sem;
-
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
- if (ret < 0)
- goto out_header;
kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
- su = nilfs_sufile_block_get_segment_usage(
- sufile, segnum, su_bh, kaddr);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
if (unlikely(!nilfs_segment_usage_clean(su))) {
printk(KERN_WARNING "%s: segment %llu must be clean\n",
__func__, (unsigned long long)segnum);
kunmap_atomic(kaddr, KM_USER0);
- goto out_su_bh;
+ return;
}
nilfs_segment_usage_set_dirty(su);
kunmap_atomic(kaddr, KM_USER0);
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ncleansegs, -1);
- le64_add_cpu(&header->sh_ndirtysegs, 1);
- kunmap_atomic(kaddr, KM_USER0);
-
- nilfs_mdt_mark_buffer_dirty(header_bh);
+ nilfs_sufile_mod_counter(header_bh, -1, 1);
nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
-
- out_su_bh:
- brelse(su_bh);
- out_header:
- brelse(header_bh);
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
-/**
- * nilfs_sufile_freev - free segments
- * @sufile: inode of segment usage file
- * @segnum: array of segment numbers
- * @nsegs: number of segments
- *
- * Description: nilfs_sufile_freev() frees segments specified by @segnum and
- * @nsegs, which must have been returned by a previous call to
- * nilfs_sufile_alloc().
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-#define NILFS_SUFILE_FREEV_PREALLOC 16
-int nilfs_sufile_freev(struct inode *sufile, __u64 *segnum, size_t nsegs)
+void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, **su_bh,
- *su_bh_prealloc[NILFS_SUFILE_FREEV_PREALLOC];
- struct the_nilfs *nilfs;
- struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
void *kaddr;
- int ret, i;
+ int clean, dirty;
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
- /* prepare resources */
- if (nsegs <= NILFS_SUFILE_FREEV_PREALLOC)
- su_bh = su_bh_prealloc;
- else {
- su_bh = kmalloc(sizeof(*su_bh) * nsegs, GFP_NOFS);
- if (su_bh == NULL) {
- ret = -ENOMEM;
- goto out_sem;
- }
- }
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_su_bh;
- for (i = 0; i < nsegs; i++) {
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum[i],
- 0, &su_bh[i]);
- if (ret < 0)
- goto out_bh;
- }
-
- /* free segments */
- for (i = 0; i < nsegs; i++) {
- kaddr = kmap_atomic(su_bh[i]->b_page, KM_USER0);
- su = nilfs_sufile_block_get_segment_usage(
- sufile, segnum[i], su_bh[i], kaddr);
- WARN_ON(nilfs_segment_usage_error(su));
- nilfs_segment_usage_set_clean(su);
+ kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+ if (su->su_flags == cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY) &&
+ su->su_nblocks == cpu_to_le32(0)) {
kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(su_bh[i]);
+ return;
}
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ncleansegs, nsegs);
- le64_add_cpu(&header->sh_ndirtysegs, -(u64)nsegs);
+ clean = nilfs_segment_usage_clean(su);
+ dirty = nilfs_segment_usage_dirty(su);
+
+ /* make the segment garbage */
+ su->su_lastmod = cpu_to_le64(0);
+ su->su_nblocks = cpu_to_le32(0);
+ su->su_flags = cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY);
kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(header_bh);
+
+ nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1);
+ nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
+}
- out_bh:
- for (i--; i >= 0; i--)
- brelse(su_bh[i]);
- brelse(header_bh);
+void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
+{
+ struct nilfs_segment_usage *su;
+ void *kaddr;
+ int sudirty;
- out_su_bh:
- if (su_bh != su_bh_prealloc)
- kfree(su_bh);
+ kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+ if (nilfs_segment_usage_clean(su)) {
+ printk(KERN_WARNING "%s: segment %llu is already clean\n",
+ __func__, (unsigned long long)segnum);
+ kunmap_atomic(kaddr, KM_USER0);
+ return;
+ }
+ WARN_ON(nilfs_segment_usage_error(su));
+ WARN_ON(!nilfs_segment_usage_dirty(su));
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
-}
+ sudirty = nilfs_segment_usage_dirty(su);
+ nilfs_segment_usage_set_clean(su);
+ kunmap_atomic(kaddr, KM_USER0);
+ nilfs_mdt_mark_buffer_dirty(su_bh);
-/**
- * nilfs_sufile_free -
- * @sufile:
- * @segnum:
- */
-int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
-{
- return nilfs_sufile_freev(sufile, &segnum, 1);
+ nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0);
+ nilfs_mdt_mark_dirty(sufile);
}
/**
return ret;
}
-/**
- * nilfs_sufile_set_error - mark a segment as erroneous
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description: nilfs_sufile_set_error() marks the segment specified by
- * @segnum as erroneous. The error segment will never be used again.
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- *
- * %-EINVAL - Invalid segment usage number.
- */
-int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, *su_bh;
struct nilfs_segment_usage *su;
- struct nilfs_sufile_header *header;
void *kaddr;
- int ret;
-
- if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
- printk(KERN_WARNING "%s: invalid segment number: %llu\n",
- __func__, (unsigned long long)segnum);
- return -EINVAL;
- }
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_sem;
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
- if (ret < 0)
- goto out_header;
+ int suclean;
kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
if (nilfs_segment_usage_error(su)) {
kunmap_atomic(kaddr, KM_USER0);
- brelse(su_bh);
- goto out_header;
+ return;
}
-
+ suclean = nilfs_segment_usage_clean(su);
nilfs_segment_usage_set_error(su);
kunmap_atomic(kaddr, KM_USER0);
- brelse(su_bh);
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ndirtysegs, -1);
- kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(header_bh);
+ if (suclean)
+ nilfs_sufile_mod_counter(header_bh, -1, 0);
nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
- brelse(su_bh);
-
- out_header:
- brelse(header_bh);
-
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
/**
si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks);
si[i + j].sui_flags = le32_to_cpu(su->su_flags) &
~(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
- if (nilfs_segment_is_active(nilfs, segnum + i + j))
+ if (nilfs_segment_is_active(nilfs, segnum + j))
si[i + j].sui_flags |=
(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
}
}
int nilfs_sufile_alloc(struct inode *, __u64 *);
-int nilfs_sufile_cancel_free(struct inode *, __u64);
-int nilfs_sufile_freev(struct inode *, __u64 *, size_t);
-int nilfs_sufile_free(struct inode *, __u64);
int nilfs_sufile_get_segment_usage(struct inode *, __u64,
struct nilfs_segment_usage **,
struct buffer_head **);
struct buffer_head *);
int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *);
int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *);
-int nilfs_sufile_set_error(struct inode *, __u64);
ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *,
size_t);
+int nilfs_sufile_update(struct inode *, __u64, int,
+ void (*dofunc)(struct inode *, __u64,
+ struct buffer_head *,
+ struct buffer_head *));
+void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+
+/**
+ * nilfs_sufile_cancel_free -
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description:
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ */
+static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0,
+ nilfs_sufile_do_cancel_free);
+}
+
+/**
+ * nilfs_sufile_scrap - make a segment garbage
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_scrap(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 1, nilfs_sufile_do_scrap);
+}
+
+/**
+ * nilfs_sufile_free - free segment
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0, nilfs_sufile_do_free);
+}
+
+/**
+ * nilfs_sufile_set_error - mark a segment as erroneous
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description: nilfs_sufile_set_error() marks the segment specified by
+ * @segnum as erroneous. The error segment will never be used again.
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-EINVAL - Invalid segment usage number.
+ */
+static inline int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0,
+ nilfs_sufile_do_set_error);
+}
#endif /* _NILFS_SUFILE_H */
MODULE_AUTHOR("NTT Corp.");
MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem "
"(NILFS)");
-MODULE_VERSION(NILFS_VERSION);
MODULE_LICENSE("GPL");
static int nilfs_remount(struct super_block *sb, int *flags, char *data);
{
struct super_block *sb = dentry->d_sb;
struct nilfs_sb_info *sbi = NILFS_SB(sb);
+ struct the_nilfs *nilfs = sbi->s_nilfs;
+ u64 id = huge_encode_dev(sb->s_bdev->bd_dev);
unsigned long long blocks;
unsigned long overhead;
unsigned long nrsvblocks;
sector_t nfreeblocks;
- struct the_nilfs *nilfs = sbi->s_nilfs;
int err;
/*
buf->f_files = atomic_read(&sbi->s_inodes_count);
buf->f_ffree = 0; /* nilfs_count_free_inodes(sb); */
buf->f_namelen = NILFS_NAME_LEN;
+ buf->f_fsid.val[0] = (u32)id;
+ buf->f_fsid.val[1] = (u32)(id >> 32);
+
return 0;
}
static int nilfs_load_super_root(struct the_nilfs *nilfs,
struct nilfs_sb_info *sbi, sector_t sr_block)
{
+ static struct lock_class_key dat_lock_key;
struct buffer_head *bh_sr;
struct nilfs_super_root *raw_sr;
struct nilfs_super_block **sbp = nilfs->ns_sbp;
if (unlikely(err))
goto failed_sufile;
+ lockdep_set_class(&NILFS_MDT(nilfs->ns_dat)->mi_sem, &dat_lock_key);
+ lockdep_set_class(&NILFS_MDT(nilfs->ns_gc_dat)->mi_sem, &dat_lock_key);
+
nilfs_mdt_set_shadow(nilfs->ns_dat, nilfs->ns_gc_dat);
nilfs_mdt_set_entry_size(nilfs->ns_cpfile, checkpoint_size,
sizeof(struct nilfs_cpfile_header));
rem = 0;
}
- kevent->name = kmalloc(len + rem, GFP_KERNEL);
+ kevent->name = kmalloc(len + rem, GFP_NOFS);
if (unlikely(!kevent->name)) {
kmem_cache_free(event_cachep, kevent);
return NULL;
else
mlog_errno(ret);
+ /*
+ * In case of error, manually free the allocation and do the iput().
+ * We need to do this because error here means no d_instantiate(),
+ * which means iput() will not be called during dput(dentry).
+ */
+ if (ret < 0 && !alias) {
+ ocfs2_lock_res_free(&dl->dl_lockres);
+ BUG_ON(dl->dl_count != 1);
+ spin_lock(&dentry_attach_lock);
+ dentry->d_fsdata = NULL;
+ spin_unlock(&dentry_attach_lock);
+ kfree(dl);
+ iput(inode);
+ }
+
dput(alias);
return ret;
u32 *num_dx_entries,
struct buffer_head *dirent_bh)
{
- int ret, namelen, i;
+ int ret = 0, namelen, i;
char *de_buf, *limit;
struct ocfs2_dir_entry *de;
struct buffer_head *dx_leaf_bh;
*/
BUG_ON(alloc > 2);
- ret = ocfs2_reserve_clusters(osb, alloc, &data_ac);
+ ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac);
if (ret) {
mlog_errno(ret);
goto out;
/* If the inode allocator bit is clear, this inode must be stale */
if (!set) {
- mlog(0, "inode %llu suballoc bit is clear\n", blkno);
+ mlog(0, "inode %llu suballoc bit is clear\n",
+ (unsigned long long)blkno);
status = -ESTALE;
goto unlock_nfs_sync;
}
if (status < 0) {
if (status == -ESTALE) {
mlog(0, "stale inode ino: %llu generation: %u\n",
- blkno, handle->ih_generation);
+ (unsigned long long)blkno, handle->ih_generation);
}
result = ERR_PTR(status);
goto bail;
check_gen:
if (handle->ih_generation != inode->i_generation) {
iput(inode);
- mlog(0, "stale inode ino: %llu generation: %u\n", blkno,
- handle->ih_generation);
+ mlog(0, "stale inode ino: %llu generation: %u\n",
+ (unsigned long long)blkno, handle->ih_generation);
result = ERR_PTR(-ESTALE);
goto bail;
}
return written ? written : ret;
}
+static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
+ struct file *out,
+ struct splice_desc *sd)
+{
+ int ret;
+
+ ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
+ sd->total_len, 0, NULL);
+ if (ret < 0) {
+ mlog_errno(ret);
+ return ret;
+ }
+
+ return splice_from_pipe_feed(pipe, sd, pipe_to_file);
+}
+
static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
struct file *out,
loff_t *ppos,
unsigned int flags)
{
int ret;
- struct inode *inode = out->f_path.dentry->d_inode;
+ struct address_space *mapping = out->f_mapping;
+ struct inode *inode = mapping->host;
+ struct splice_desc sd = {
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
(unsigned int)len,
out->f_path.dentry->d_name.len,
out->f_path.dentry->d_name.name);
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
+ if (pipe->inode)
+ mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
- ret = ocfs2_rw_lock(inode, 1);
- if (ret < 0) {
- mlog_errno(ret);
- goto out;
- }
+ splice_from_pipe_begin(&sd);
+ do {
+ ret = splice_from_pipe_next(pipe, &sd);
+ if (ret <= 0)
+ break;
- ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
- NULL);
- if (ret < 0) {
- mlog_errno(ret);
- goto out_unlock;
- }
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+ ret = ocfs2_rw_lock(inode, 1);
+ if (ret < 0)
+ mlog_errno(ret);
+ else {
+ ret = ocfs2_splice_to_file(pipe, out, &sd);
+ ocfs2_rw_unlock(inode, 1);
+ }
+ mutex_unlock(&inode->i_mutex);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, &sd);
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
- ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags);
if (pipe->inode)
mutex_unlock(&pipe->inode->i_mutex);
-out_unlock:
- ocfs2_rw_unlock(inode, 1);
-out:
- mutex_unlock(&inode->i_mutex);
+ if (sd.num_spliced)
+ ret = sd.num_spliced;
+
+ if (ret > 0) {
+ unsigned long nr_pages;
+
+ *ppos += ret;
+ nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+ /*
+ * If file or inode is SYNC and we actually wrote some data,
+ * sync it.
+ */
+ if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ int err;
+
+ mutex_lock(&inode->i_mutex);
+ err = ocfs2_rw_lock(inode, 1);
+ if (err < 0) {
+ mlog_errno(err);
+ } else {
+ err = generic_osync_inode(inode, mapping,
+ OSYNC_METADATA|OSYNC_DATA);
+ ocfs2_rw_unlock(inode, 1);
+ }
+ mutex_unlock(&inode->i_mutex);
+
+ if (err)
+ ret = err;
+ }
+ balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
+ }
mlog_exit(ret);
return ret;
}
/* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry +
- * inode alloc group descriptor + orphan dir index leaf */
-#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3)
+ * inode alloc group descriptor + orphan dir index root +
+ * orphan dir index leaf */
+#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4)
/* dinode update, old dir dinode update, new dir dinode update, old
* dir dir entry, new dir dir entry, dir entry update for renaming
struct inode *orphan_dir = NULL;
struct ocfs2_dinode *newfe = NULL;
char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
- struct buffer_head *orphan_entry_bh = NULL;
struct buffer_head *newfe_bh = NULL;
struct buffer_head *old_inode_bh = NULL;
- struct buffer_head *insert_entry_bh = NULL;
struct ocfs2_super *osb = NULL;
u64 newfe_blkno, old_de_ino;
handle_t *handle = NULL;
brelse(old_inode_bh);
brelse(old_dir_bh);
brelse(new_dir_bh);
- brelse(orphan_entry_bh);
- brelse(insert_entry_bh);
mlog_exit(status);
struct buffer_head *inode_bh = NULL;
struct ocfs2_dinode *inode_fe;
- mlog_entry("blkno: %llu\n", blkno);
+ mlog_entry("blkno: %llu\n", (unsigned long long)blkno);
/* dirty read disk */
status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh);
if (status < 0) {
- mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status);
+ mlog(ML_ERROR, "read block %llu failed %d\n",
+ (unsigned long long)blkno, status);
goto bail;
}
inode_fe = (struct ocfs2_dinode *) inode_bh->b_data;
if (!OCFS2_IS_VALID_DINODE(inode_fe)) {
- mlog(ML_ERROR, "invalid inode %llu requested\n", blkno);
+ mlog(ML_ERROR, "invalid inode %llu requested\n",
+ (unsigned long long)blkno);
status = -EINVAL;
goto bail;
}
- if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT &&
+ if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
(u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) {
mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n",
- blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
+ (unsigned long long)blkno,
+ (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
status = -EINVAL;
goto bail;
}
u64 bg_blkno;
int status;
- mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit);
+ mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno,
+ (unsigned int)bit);
alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data;
if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) {
status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno,
&group_bh);
if (status < 0) {
- mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status);
+ mlog(ML_ERROR, "read group %llu failed %d\n",
+ (unsigned long long)bg_blkno, status);
goto bail;
}
struct inode *inode_alloc_inode;
struct buffer_head *alloc_bh = NULL;
- mlog_entry("blkno: %llu", blkno);
+ mlog_entry("blkno: %llu", (unsigned long long)blkno);
status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot,
&suballoc_bit);
#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/utsname.h>
+#include <linux/namei.h>
#define MLOG_MASK_PREFIX ML_NAMEI
#include <cluster/masklog.h>
#include "buffer_head_io.h"
-static char *ocfs2_page_getlink(struct dentry * dentry,
- struct page **ppage);
-static char *ocfs2_fast_symlink_getlink(struct inode *inode,
- struct buffer_head **bh);
-
-/* get the link contents into pagecache */
-static char *ocfs2_page_getlink(struct dentry * dentry,
- struct page **ppage)
-{
- struct page * page;
- struct address_space *mapping = dentry->d_inode->i_mapping;
- page = read_mapping_page(mapping, 0, NULL);
- if (IS_ERR(page))
- goto sync_fail;
- *ppage = page;
- return kmap(page);
-
-sync_fail:
- return (char*)page;
-}
static char *ocfs2_fast_symlink_getlink(struct inode *inode,
struct buffer_head **bh)
return ret;
}
-static void *ocfs2_follow_link(struct dentry *dentry,
- struct nameidata *nd)
+static void *ocfs2_fast_follow_link(struct dentry *dentry,
+ struct nameidata *nd)
{
- int status;
- char *link;
+ int status = 0;
+ int len;
+ char *target, *link = ERR_PTR(-ENOMEM);
struct inode *inode = dentry->d_inode;
- struct page *page = NULL;
struct buffer_head *bh = NULL;
-
- if (ocfs2_inode_is_fast_symlink(inode))
- link = ocfs2_fast_symlink_getlink(inode, &bh);
- else
- link = ocfs2_page_getlink(dentry, &page);
- if (IS_ERR(link)) {
- status = PTR_ERR(link);
+
+ mlog_entry_void();
+
+ BUG_ON(!ocfs2_inode_is_fast_symlink(inode));
+ target = ocfs2_fast_symlink_getlink(inode, &bh);
+ if (IS_ERR(target)) {
+ status = PTR_ERR(target);
mlog_errno(status);
goto bail;
}
- status = vfs_follow_link(nd, link);
+ /* Fast symlinks can't be large */
+ len = strlen(target);
+ link = kzalloc(len + 1, GFP_NOFS);
+ if (!link) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto bail;
+ }
+
+ memcpy(link, target, len);
+ nd_set_link(nd, link);
bail:
- if (page) {
- kunmap(page);
- page_cache_release(page);
- }
brelse(bh);
- return ERR_PTR(status);
+ mlog_exit(status);
+ return status ? ERR_PTR(status) : link;
+}
+
+static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+ char *link = cookie;
+
+ kfree(link);
}
const struct inode_operations ocfs2_symlink_inode_operations = {
.readlink = page_readlink,
- .follow_link = ocfs2_follow_link,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
.getattr = ocfs2_getattr,
.setattr = ocfs2_setattr,
.setxattr = generic_setxattr,
};
const struct inode_operations ocfs2_fast_symlink_inode_operations = {
.readlink = ocfs2_readlink,
- .follow_link = ocfs2_follow_link,
+ .follow_link = ocfs2_fast_follow_link,
+ .put_link = ocfs2_fast_put_link,
.getattr = ocfs2_getattr,
.setattr = ocfs2_setattr,
.setxattr = generic_setxattr,
if (!IS_ERR(tmp)) {
fd = get_unused_fd_flags(flags);
if (fd >= 0) {
- struct file *f = do_filp_open(dfd, tmp, flags, mode);
+ struct file *f = do_filp_open(dfd, tmp, flags, mode, 0);
if (IS_ERR(f)) {
put_unused_fd(fd);
fd = PTR_ERR(f);
* -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
*/
+static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
+{
+ if (pipe->inode)
+ mutex_lock_nested(&pipe->inode->i_mutex, subclass);
+}
+
+void pipe_lock(struct pipe_inode_info *pipe)
+{
+ /*
+ * pipe_lock() nests non-pipe inode locks (for writing to a file)
+ */
+ pipe_lock_nested(pipe, I_MUTEX_PARENT);
+}
+EXPORT_SYMBOL(pipe_lock);
+
+void pipe_unlock(struct pipe_inode_info *pipe)
+{
+ if (pipe->inode)
+ mutex_unlock(&pipe->inode->i_mutex);
+}
+EXPORT_SYMBOL(pipe_unlock);
+
+void pipe_double_lock(struct pipe_inode_info *pipe1,
+ struct pipe_inode_info *pipe2)
+{
+ BUG_ON(pipe1 == pipe2);
+
+ if (pipe1 < pipe2) {
+ pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+ } else {
+ pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+ pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ }
+}
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe)
{
* is considered a noninteractive wait:
*/
prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
schedule();
finish_wait(&pipe->wait, &wait);
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
}
static int
#include <linux/delayacct.h>
#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
+#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <asm/pgtable.h>
char state;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
+ int permitted;
struct mm_struct *mm;
unsigned long long start_time;
unsigned long cmin_flt = 0, cmaj_flt = 0;
state = *get_task_state(task);
vsize = eip = esp = 0;
+ permitted = ptrace_may_access(task, PTRACE_MODE_READ);
mm = get_task_mm(task);
if (mm) {
vsize = task_vsize(mm);
- eip = KSTK_EIP(task);
- esp = KSTK_ESP(task);
+ if (permitted) {
+ eip = KSTK_EIP(task);
+ esp = KSTK_ESP(task);
+ }
}
get_task_comm(tcomm, task);
unlock_task_sighand(task, &flags);
}
- if (!whole || num_threads < 2)
+ if (permitted && (!whole || num_threads < 2))
wchan = get_wchan(task);
if (!whole) {
min_flt = task->min_flt;
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
- mm ? mm->start_stack : 0,
+ (permitted && mm) ? mm->start_stack : 0,
esp,
eip,
/* The signal information here is obsolete.
wchan = get_wchan(task);
if (lookup_symbol_name(wchan, symname) < 0)
- return sprintf(buffer, "%lu", wchan);
+ if (!ptrace_may_access(task, PTRACE_MODE_READ))
+ return 0;
+ else
+ return sprintf(buffer, "%lu", wchan);
else
return sprintf(buffer, "%s", symname);
}
{
struct proc_mounts *p = file->private_data;
struct mnt_namespace *ns = p->ns;
- unsigned res = 0;
+ unsigned res = POLLIN | POLLRDNORM;
poll_wait(file, &ns->poll, wait);
spin_lock(&vfsmount_lock);
if (p->event != ns->event) {
p->event = ns->event;
- res = POLLERR;
+ res |= POLLERR | POLLPRI;
}
spin_unlock(&vfsmount_lock);
const struct pid_entry *p = ptr;
struct inode *inode;
struct proc_inode *ei;
- struct dentry *error = ERR_PTR(-EINVAL);
+ struct dentry *error = ERR_PTR(-ENOENT);
inode = proc_pid_make_inode(dir->i_sb, task);
if (!inode)
static int loadavg_proc_show(struct seq_file *m, void *v)
{
- int a, b, c;
- unsigned long seq;
+ unsigned long avnrun[3];
- do {
- seq = read_seqbegin(&xtime_lock);
- a = avenrun[0] + (FIXED_1/200);
- b = avenrun[1] + (FIXED_1/200);
- c = avenrun[2] + (FIXED_1/200);
- } while (read_seqretry(&xtime_lock, seq));
+ get_avenrun(avnrun, FIXED_1/200, 0);
- seq_printf(m, "%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
- LOAD_INT(a), LOAD_FRAC(a),
- LOAD_INT(b), LOAD_FRAC(b),
- LOAD_INT(c), LOAD_FRAC(c),
+ seq_printf(m, "%lu.%02lu %lu.%02lu %lu.%02lu %ld/%d %d\n",
+ LOAD_INT(avnrun[0]), LOAD_FRAC(avnrun[0]),
+ LOAD_INT(avnrun[1]), LOAD_FRAC(avnrun[1]),
+ LOAD_INT(avnrun[2]), LOAD_FRAC(avnrun[2]),
nr_running(), nr_threads,
task_active_pid_ns(current)->last_pid);
return 0;
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_long_read(&vm_committed_space);
+ committed = percpu_counter_read_positive(&vm_committed_as);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
sb->s_flags = flags;
err = proc_fill_super(sb);
if (err) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
}
#ifndef arch_irq_stat
#define arch_irq_stat() 0
#endif
+#ifndef arch_idle_time
+#define arch_idle_time(cpu) 0
+#endif
static int show_stat(struct seq_file *p, void *v)
{
nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
system = cputime64_add(system, kstat_cpu(i).cpustat.system);
idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
+ idle = cputime64_add(idle, arch_idle_time(i));
iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
nice = kstat_cpu(i).cpustat.nice;
system = kstat_cpu(i).cpustat.system;
idle = kstat_cpu(i).cpustat.idle;
+ idle = cputime64_add(idle, arch_idle_time(i));
iowait = kstat_cpu(i).cpustat.iowait;
irq = kstat_cpu(i).cpustat.irq;
softirq = kstat_cpu(i).cpustat.softirq;
goto out_task;
ret = 0;
+
+ if (!count)
+ goto out_task;
+
mm = get_task_mm(task);
if (!mm)
goto out_task;
struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
dev = inode->i_sb->s_dev;
ino = inode->i_ino;
- pgoff = (loff_t)vma->pg_off << PAGE_SHIFT;
+ pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
}
seq_printf(m,
-#
-# Makefile for the Linux filesystems.
-#
-# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-y :=
-
obj-$(CONFIG_QUOTA) += dquot.o
obj-$(CONFIG_QFMT_V1) += quota_v1.o
obj-$(CONFIG_QFMT_V2) += quota_v2.o
#define store_ih(where,what) copy_item_head (where, what)
+static inline bool is_privroot_deh(struct dentry *dir,
+ struct reiserfs_de_head *deh)
+{
+ int ret = 0;
+#ifdef CONFIG_REISERFS_FS_XATTR
+ struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
+ ret = (dir == dir->d_parent && privroot->d_inode &&
+ deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
+#endif
+ return ret;
+}
+
int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
filldir_t filldir, loff_t *pos)
{
}
/* Ignore the .reiserfs_priv entry */
- if (reiserfs_xattrs(inode->i_sb) &&
- !old_format_only(inode->i_sb) &&
- dentry == inode->i_sb->s_root &&
- REISERFS_SB(inode->i_sb)->priv_root &&
- REISERFS_SB(inode->i_sb)->priv_root->d_inode
- && deh_objectid(deh) ==
- le32_to_cpu(INODE_PKEY
- (REISERFS_SB(inode->i_sb)->
- priv_root->d_inode)->
- k_objectid)) {
+ if (is_privroot_deh(dentry, deh))
continue;
- }
d_off = deh_offset(deh);
*pos = d_off;
&path_to_entry, &de);
pathrelse(&path_to_entry);
if (retval == NAME_FOUND) {
- /* Hide the .reiserfs_priv directory */
- if (reiserfs_xattrs(dir->i_sb) &&
- !old_format_only(dir->i_sb) &&
- REISERFS_SB(dir->i_sb)->priv_root &&
- REISERFS_SB(dir->i_sb)->priv_root->d_inode &&
- de.de_objectid ==
- le32_to_cpu(INODE_PKEY
- (REISERFS_SB(dir->i_sb)->priv_root->d_inode)->
- k_objectid)) {
- reiserfs_write_unlock(dir->i_sb);
- return ERR_PTR(-EACCES);
- }
-
- inode =
- reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id));
+ inode = reiserfs_iget(dir->i_sb,
+ (struct cpu_key *)&(de.de_dir_id));
if (!inode || IS_ERR(inode)) {
reiserfs_write_unlock(dir->i_sb);
return ERR_PTR(-EACCES);
static void reiserfs_kill_sb(struct super_block *s)
{
if (REISERFS_SB(s)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
if (REISERFS_SB(s)->xattr_root) {
d_invalidate(REISERFS_SB(s)->xattr_root);
dput(REISERFS_SB(s)->xattr_root);
REISERFS_SB(s)->xattr_root = NULL;
}
-#endif
if (REISERFS_SB(s)->priv_root) {
d_invalidate(REISERFS_SB(s)->priv_root);
dput(REISERFS_SB(s)->priv_root);
}
out_ok:
- kfree(s->s_options);
- s->s_options = new_opts;
+ replace_mount_options(s, new_opts);
return 0;
out_err:
goto error;
}
- if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+ if ((errval = reiserfs_lookup_privroot(s)) ||
+ (errval = reiserfs_xattr_init(s, s->s_flags))) {
dput(s->s_root);
s->s_root = NULL;
goto error;
reiserfs_info(s, "using 3.5.x disk format\n");
}
- if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+ if ((errval = reiserfs_lookup_privroot(s)) ||
+ (errval = reiserfs_xattr_init(s, s->s_flags))) {
dput(s->s_root);
s->s_root = NULL;
goto error;
#define xattr_may_create(flags) (!flags || flags & XATTR_CREATE)
-/* Returns and possibly creates the xattr dir. */
-static struct dentry *lookup_or_create_dir(struct dentry *parent,
- const char *name, int flags)
+static struct dentry *open_xa_root(struct super_block *sb, int flags)
{
- struct dentry *dentry;
- BUG_ON(!parent);
-
- dentry = lookup_one_len(name, parent, strlen(name));
- if (IS_ERR(dentry))
- return dentry;
- else if (!dentry->d_inode) {
- int err = -ENODATA;
+ struct dentry *privroot = REISERFS_SB(sb)->priv_root;
+ struct dentry *xaroot;
+ if (!privroot->d_inode)
+ return ERR_PTR(-ENODATA);
- if (xattr_may_create(flags)) {
- mutex_lock_nested(&parent->d_inode->i_mutex,
- I_MUTEX_XATTR);
- err = xattr_mkdir(parent->d_inode, dentry, 0700);
- mutex_unlock(&parent->d_inode->i_mutex);
- }
+ mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
+ xaroot = dget(REISERFS_SB(sb)->xattr_root);
+ if (!xaroot)
+ xaroot = ERR_PTR(-ENODATA);
+ else if (!xaroot->d_inode) {
+ int err = -ENODATA;
+ if (xattr_may_create(flags))
+ err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
if (err) {
- dput(dentry);
- dentry = ERR_PTR(err);
+ dput(xaroot);
+ xaroot = ERR_PTR(err);
}
}
- return dentry;
-}
-
-static struct dentry *open_xa_root(struct super_block *sb, int flags)
-{
- struct dentry *privroot = REISERFS_SB(sb)->priv_root;
- if (!privroot)
- return ERR_PTR(-ENODATA);
- return lookup_or_create_dir(privroot, XAROOT_NAME, flags);
+ mutex_unlock(&privroot->d_inode->i_mutex);
+ return xaroot;
}
static struct dentry *open_xa_dir(const struct inode *inode, int flags)
le32_to_cpu(INODE_PKEY(inode)->k_objectid),
inode->i_generation);
- xadir = lookup_or_create_dir(xaroot, namebuf, flags);
+ mutex_lock_nested(&xaroot->d_inode->i_mutex, I_MUTEX_XATTR);
+
+ xadir = lookup_one_len(namebuf, xaroot, strlen(namebuf));
+ if (!IS_ERR(xadir) && !xadir->d_inode) {
+ int err = -ENODATA;
+ if (xattr_may_create(flags))
+ err = xattr_mkdir(xaroot->d_inode, xadir, 0700);
+ if (err) {
+ dput(xadir);
+ xadir = ERR_PTR(err);
+ }
+ }
+
+ mutex_unlock(&xaroot->d_inode->i_mutex);
dput(xaroot);
return xadir;
-
}
/* The following are side effects of other operations that aren't explicitly
{
struct reiserfs_dentry_buf *dbuf = buf;
struct dentry *dentry;
+ WARN_ON_ONCE(!mutex_is_locked(&dbuf->xadir->d_inode->i_mutex));
if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
return -ENOSPC;
if (IS_ERR(xadir))
return ERR_CAST(xadir);
+ mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
xafile = lookup_one_len(name, xadir, strlen(name));
if (IS_ERR(xafile)) {
err = PTR_ERR(xafile);
if (!xafile->d_inode) {
err = -ENODATA;
- if (xattr_may_create(flags)) {
- mutex_lock_nested(&xadir->d_inode->i_mutex,
- I_MUTEX_XATTR);
+ if (xattr_may_create(flags))
err = xattr_create(xadir->d_inode, xafile,
0700|S_IFREG);
- mutex_unlock(&xadir->d_inode->i_mutex);
- }
}
if (err)
dput(xafile);
out:
+ mutex_unlock(&xadir->d_inode->i_mutex);
dput(xadir);
if (err)
return ERR_PTR(err);
if (IS_ERR(xadir))
return PTR_ERR(xadir);
+ mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
dentry = lookup_one_len(name, xadir, strlen(name));
if (IS_ERR(dentry)) {
err = PTR_ERR(dentry);
}
if (dentry->d_inode) {
- mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
err = xattr_unlink(xadir->d_inode, dentry);
- mutex_unlock(&xadir->d_inode->i_mutex);
update_ctime(inode);
}
dput(dentry);
out_dput:
+ mutex_unlock(&xadir->d_inode->i_mutex);
dput(xadir);
return err;
}
return err;
}
-/* Actual operations that are exported to VFS-land */
-struct xattr_handler *reiserfs_xattr_handlers[] = {
- &reiserfs_xattr_user_handler,
- &reiserfs_xattr_trusted_handler,
-#ifdef CONFIG_REISERFS_FS_SECURITY
- &reiserfs_xattr_security_handler,
-#endif
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
- &reiserfs_posix_acl_access_handler,
- &reiserfs_posix_acl_default_handler,
-#endif
- NULL
-};
-
/*
* In order to implement different sets of xattr operations for each xattr
* prefix with the generic xattr API, a filesystem should create a
if (!dentry->d_inode)
return -EINVAL;
- if (!reiserfs_xattrs(dentry->d_sb) ||
+ if (!dentry->d_sb->s_xattr ||
get_inode_sd_version(dentry->d_inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
return error;
}
-int reiserfs_permission(struct inode *inode, int mask)
-{
- /*
- * We don't do permission checks on the internal objects.
- * Permissions are determined by the "owning" object.
- */
- if (IS_PRIVATE(inode))
- return 0;
- /*
- * Stat data v1 doesn't support ACLs.
- */
- if (get_inode_sd_version(inode) == STAT_DATA_V1)
- return generic_permission(inode, mask, NULL);
- else
- return generic_permission(inode, mask, reiserfs_check_acl);
-}
-
static int create_privroot(struct dentry *dentry)
{
int err;
struct inode *inode = dentry->d_parent->d_inode;
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
+ WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+
err = xattr_mkdir(inode, dentry, 0700);
- mutex_unlock(&inode->i_mutex);
- if (err) {
- dput(dentry);
- dentry = NULL;
+ if (err || !dentry->d_inode) {
+ reiserfs_warning(dentry->d_sb, "jdm-20006",
+ "xattrs/ACLs enabled and couldn't "
+ "find/create .reiserfs_priv. "
+ "Failing mount.");
+ return -EOPNOTSUPP;
}
- if (dentry && dentry->d_inode)
- reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
- "storage.\n", PRIVROOT_NAME);
+ dentry->d_inode->i_flags |= S_PRIVATE;
+ reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
+ "storage.\n", PRIVROOT_NAME);
- return err;
+ return 0;
}
+#else
+int __init reiserfs_xattr_register_handlers(void) { return 0; }
+void reiserfs_xattr_unregister_handlers(void) {}
+static int create_privroot(struct dentry *dentry) { return 0; }
+#endif
+
+/* Actual operations that are exported to VFS-land */
+struct xattr_handler *reiserfs_xattr_handlers[] = {
+#ifdef CONFIG_REISERFS_FS_XATTR
+ &reiserfs_xattr_user_handler,
+ &reiserfs_xattr_trusted_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_SECURITY
+ &reiserfs_xattr_security_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_POSIX_ACL
+ &reiserfs_posix_acl_access_handler,
+ &reiserfs_posix_acl_default_handler,
+#endif
+ NULL
+};
+
static int xattr_mount_check(struct super_block *s)
{
/* We need generation numbers to ensure that the oid mapping is correct
return 0;
}
-#else
-int __init reiserfs_xattr_register_handlers(void) { return 0; }
-void reiserfs_xattr_unregister_handlers(void) {}
+int reiserfs_permission(struct inode *inode, int mask)
+{
+ /*
+ * We don't do permission checks on the internal objects.
+ * Permissions are determined by the "owning" object.
+ */
+ if (IS_PRIVATE(inode))
+ return 0;
+
+#ifdef CONFIG_REISERFS_FS_XATTR
+ /*
+ * Stat data v1 doesn't support ACLs.
+ */
+ if (get_inode_sd_version(inode) != STAT_DATA_V1)
+ return generic_permission(inode, mask, reiserfs_check_acl);
#endif
+ return generic_permission(inode, mask, NULL);
+}
/* This will catch lookups from the fs root to .reiserfs_priv */
static int
xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
{
struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
- if (name->len == priv_root->d_name.len &&
- name->hash == priv_root->d_name.hash &&
- !memcmp(name->name, priv_root->d_name.name, name->len)) {
+ if (container_of(q1, struct dentry, d_name) == priv_root)
return -ENOENT;
- } else if (q1->len == name->len &&
+ if (q1->len == name->len &&
!memcmp(q1->name, name->name, name->len))
return 0;
return 1;
.d_compare = xattr_lookup_poison,
};
+int reiserfs_lookup_privroot(struct super_block *s)
+{
+ struct dentry *dentry;
+ int err = 0;
+
+ /* If we don't have the privroot located yet - go find it */
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
+ strlen(PRIVROOT_NAME));
+ if (!IS_ERR(dentry)) {
+ REISERFS_SB(s)->priv_root = dentry;
+ s->s_root->d_op = &xattr_lookup_poison_ops;
+ if (dentry->d_inode)
+ dentry->d_inode->i_flags |= S_PRIVATE;
+ } else
+ err = PTR_ERR(dentry);
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
+
+ return err;
+}
+
/* We need to take a copy of the mount flags since things like
* MS_RDONLY don't get set until *after* we're called.
* mount_flags != mount_options */
int reiserfs_xattr_init(struct super_block *s, int mount_flags)
{
int err = 0;
+ struct dentry *privroot = REISERFS_SB(s)->priv_root;
-#ifdef CONFIG_REISERFS_FS_XATTR
err = xattr_mount_check(s);
if (err)
goto error;
-#endif
- /* If we don't have the privroot located yet - go find it */
- if (!REISERFS_SB(s)->priv_root) {
- struct dentry *dentry;
- dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
- strlen(PRIVROOT_NAME));
- if (!IS_ERR(dentry)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
- if (!(mount_flags & MS_RDONLY) && !dentry->d_inode)
- err = create_privroot(dentry);
-#endif
- if (!dentry->d_inode) {
- dput(dentry);
- dentry = NULL;
- }
- } else
- err = PTR_ERR(dentry);
-
- if (!err && dentry) {
- s->s_root->d_op = &xattr_lookup_poison_ops;
- dentry->d_inode->i_flags |= S_PRIVATE;
- REISERFS_SB(s)->priv_root = dentry;
-#ifdef CONFIG_REISERFS_FS_XATTR
- /* xattrs are unavailable */
- } else if (!(mount_flags & MS_RDONLY)) {
- /* If we're read-only it just means that the dir
- * hasn't been created. Not an error -- just no
- * xattrs on the fs. We'll check again if we
- * go read-write */
- reiserfs_warning(s, "jdm-20006",
- "xattrs/ACLs enabled and couldn't "
- "find/create .reiserfs_priv. "
- "Failing mount.");
- err = -EOPNOTSUPP;
-#endif
- }
+ if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) {
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ err = create_privroot(REISERFS_SB(s)->priv_root);
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
}
-#ifdef CONFIG_REISERFS_FS_XATTR
- if (!err)
+ if (privroot->d_inode) {
s->s_xattr = reiserfs_xattr_handlers;
+ mutex_lock(&privroot->d_inode->i_mutex);
+ if (!REISERFS_SB(s)->xattr_root) {
+ struct dentry *dentry;
+ dentry = lookup_one_len(XAROOT_NAME, privroot,
+ strlen(XAROOT_NAME));
+ if (!IS_ERR(dentry))
+ REISERFS_SB(s)->xattr_root = dentry;
+ else
+ err = PTR_ERR(dentry);
+ }
+ mutex_unlock(&privroot->d_inode->i_mutex);
+ }
error:
if (err) {
clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt));
clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt));
}
-#endif
/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
- s->s_flags = s->s_flags & ~MS_POSIXACL;
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
if (reiserfs_posixacl(s))
s->s_flags |= MS_POSIXACL;
-#endif
+ else
+ s->s_flags &= ~MS_POSIXACL;
return err;
}
struct reiserfs_security_handle *sec)
{
int blocks = 0;
- int error = security_inode_init_security(inode, dir, &sec->name,
- &sec->value, &sec->length);
+ int error;
+
+ sec->name = NULL;
+
+ /* Don't add selinux attributes on xattrs - they'll never get used */
+ if (IS_PRIVATE(dir))
+ return 0;
+
+ error = security_inode_init_security(inode, dir, &sec->name,
+ &sec->value, &sec->length);
if (error) {
if (error == -EOPNOTSUPP)
error = 0;
void *buf, size_t buflen);
extern ssize_t romfs_dev_strnlen(struct super_block *sb,
unsigned long pos, size_t maxlen);
-extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size);
+extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size);
* compare a string to one in a romfs image on MTD
* - return 1 if matched, 0 if differ, -ve if error
*/
-static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
- u_char buf[16];
+ u_char buf[17];
size_t len, segment;
int ret;
- /* scan the string up to 16 bytes at a time */
+ /* scan the string up to 16 bytes at a time, and attempt to grab the
+ * trailing NUL whilst we're at it */
+ buf[0] = 0xff;
+
while (size > 0) {
- segment = min_t(size_t, size, 16);
+ segment = min_t(size_t, size + 1, 17);
ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf);
if (ret < 0)
return ret;
+ len--;
if (memcmp(buf, str, len) != 0)
return 0;
+ buf[0] = buf[len];
size -= len;
pos += len;
str += len;
}
+ /* check the trailing NUL was */
+ if (buf[0])
+ return 0;
+
return 1;
}
#endif /* CONFIG_ROMFS_ON_MTD */
return -EIO;
memcpy(buf, bh->b_data + offset, segment);
brelse(bh);
+ buf += segment;
buflen -= segment;
pos += segment;
}
* compare a string to one in a romfs image on a block device
* - return 1 if matched, 0 if differ, -ve if error
*/
-static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
struct buffer_head *bh;
unsigned long offset;
size_t segment;
- bool x;
+ bool matched, terminated = false;
- /* scan the string up to 16 bytes at a time */
+ /* compare string up to a block at a time */
while (size > 0) {
offset = pos & (ROMBSIZE - 1);
segment = min_t(size_t, size, ROMBSIZE - offset);
bh = sb_bread(sb, pos >> ROMBSBITS);
if (!bh)
return -EIO;
- x = (memcmp(bh->b_data + offset, str, segment) != 0);
- brelse(bh);
- if (x)
- return 0;
+ matched = (memcmp(bh->b_data + offset, str, segment) == 0);
+
size -= segment;
pos += segment;
str += segment;
+ if (matched && size == 0 && offset + segment < ROMBSIZE) {
+ if (!bh->b_data[offset + segment])
+ terminated = true;
+ else
+ matched = false;
+ }
+ brelse(bh);
+ if (!matched)
+ return 0;
+ }
+
+ if (!terminated) {
+ /* the terminating NUL must be on the first byte of the next
+ * block */
+ BUG_ON((pos & (ROMBSIZE - 1)) != 0);
+ bh = sb_bread(sb, pos >> ROMBSBITS);
+ if (!bh)
+ return -EIO;
+ matched = !bh->b_data[0];
+ brelse(bh);
+ if (!matched)
+ return 0;
}
return 1;
/*
* compare a string to one in romfs
+ * - the string to be compared to, str, may not be NUL-terminated; instead the
+ * string is of the specified size
* - return 1 if matched, 0 if differ, -ve if error
*/
-int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
size_t limit;
return -EIO;
if (size > ROMFS_MAXFN)
return -ENAMETOOLONG;
- if (size > limit - pos)
+ if (size + 1 > limit - pos)
return -EIO;
#ifdef CONFIG_ROMFS_ON_MTD
if (sb->s_mtd)
- return romfs_mtd_strncmp(sb, pos, str, size);
+ return romfs_mtd_strcmp(sb, pos, str, size);
#endif
#ifdef CONFIG_ROMFS_ON_BLOCK
if (sb->s_bdev)
- return romfs_blk_strncmp(sb, pos, str, size);
+ return romfs_blk_strcmp(sb, pos, str, size);
#endif
return -EIO;
}
goto error;
/* try to match the first 16 bytes of name */
- ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name,
- len);
+ ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name,
+ len);
if (ret < 0)
goto error;
if (ret == 1)
struct romfs_inode ri;
struct inode *i;
unsigned long nlen;
- unsigned nextfh, ret;
+ unsigned nextfh;
+ int ret;
umode_t mode;
/* we might have to traverse a chain of "hard link" file entries to get
do_wakeup = 0;
page_nr = 0;
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
for (;;) {
if (!pipe->readers) {
pipe->waiting_writers--;
}
- if (pipe->inode) {
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
- }
+ if (do_wakeup) {
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
}
while (page_nr < spd_pages)
* SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
* a new page in the output file page cache and fill/dirty that.
*/
-static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
- struct splice_desc *sd)
+int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+ struct splice_desc *sd)
{
struct file *file = sd->u.file;
struct address_space *mapping = file->f_mapping;
out:
return ret;
}
+EXPORT_SYMBOL(pipe_to_file);
+
+static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
+{
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
+}
/**
- * __splice_from_pipe - splice data from a pipe to given actor
+ * splice_from_pipe_feed - feed available data from a pipe to a file
* @pipe: pipe to splice from
* @sd: information to @actor
* @actor: handler that splices the data
*
* Description:
- * This function does little more than loop over the pipe and call
- * @actor to do the actual moving of a single struct pipe_buffer to
- * the desired destination. See pipe_to_file, pipe_to_sendpage, or
- * pipe_to_user.
+ * This function loops over the pipe and calls @actor to do the
+ * actual moving of a single struct pipe_buffer to the desired
+ * destination. It returns when there's no more buffers left in
+ * the pipe or if the requested number of bytes (@sd->total_len)
+ * have been copied. It returns a positive number (one) if the
+ * pipe needs to be filled with more data, zero if the required
+ * number of bytes have been copied and -errno on error.
*
+ * This, together with splice_from_pipe_{begin,end,next}, may be
+ * used to implement the functionality of __splice_from_pipe() when
+ * locking is required around copying the pipe buffers to the
+ * destination.
*/
-ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
- splice_actor *actor)
+int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
{
- int ret, do_wakeup, err;
-
- ret = 0;
- do_wakeup = 0;
-
- for (;;) {
- if (pipe->nrbufs) {
- struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
- const struct pipe_buf_operations *ops = buf->ops;
+ int ret;
- sd->len = buf->len;
- if (sd->len > sd->total_len)
- sd->len = sd->total_len;
+ while (pipe->nrbufs) {
+ struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
+ const struct pipe_buf_operations *ops = buf->ops;
- err = actor(pipe, buf, sd);
- if (err <= 0) {
- if (!ret && err != -ENODATA)
- ret = err;
+ sd->len = buf->len;
+ if (sd->len > sd->total_len)
+ sd->len = sd->total_len;
- break;
- }
+ ret = actor(pipe, buf, sd);
+ if (ret <= 0) {
+ if (ret == -ENODATA)
+ ret = 0;
+ return ret;
+ }
+ buf->offset += ret;
+ buf->len -= ret;
- ret += err;
- buf->offset += err;
- buf->len -= err;
+ sd->num_spliced += ret;
+ sd->len -= ret;
+ sd->pos += ret;
+ sd->total_len -= ret;
- sd->len -= err;
- sd->pos += err;
- sd->total_len -= err;
- if (sd->len)
- continue;
+ if (!buf->len) {
+ buf->ops = NULL;
+ ops->release(pipe, buf);
+ pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
+ pipe->nrbufs--;
+ if (pipe->inode)
+ sd->need_wakeup = true;
+ }
- if (!buf->len) {
- buf->ops = NULL;
- ops->release(pipe, buf);
- pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
- pipe->nrbufs--;
- if (pipe->inode)
- do_wakeup = 1;
- }
+ if (!sd->total_len)
+ return 0;
+ }
- if (!sd->total_len)
- break;
- }
+ return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_feed);
- if (pipe->nrbufs)
- continue;
+/**
+ * splice_from_pipe_next - wait for some data to splice from
+ * @pipe: pipe to splice from
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function will wait for some data and return a positive
+ * value (one) if pipe buffers are available. It will return zero
+ * or -errno if no more data needs to be spliced.
+ */
+int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+ while (!pipe->nrbufs) {
if (!pipe->writers)
- break;
- if (!pipe->waiting_writers) {
- if (ret)
- break;
- }
+ return 0;
- if (sd->flags & SPLICE_F_NONBLOCK) {
- if (!ret)
- ret = -EAGAIN;
- break;
- }
+ if (!pipe->waiting_writers && sd->num_spliced)
+ return 0;
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- break;
- }
+ if (sd->flags & SPLICE_F_NONBLOCK)
+ return -EAGAIN;
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible_sync(&pipe->wait);
- kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
- do_wakeup = 0;
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ if (sd->need_wakeup) {
+ wakeup_pipe_writers(pipe);
+ sd->need_wakeup = false;
}
pipe_wait(pipe);
}
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
- }
+ return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_next);
- return ret;
+/**
+ * splice_from_pipe_begin - start splicing from pipe
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function should be called before a loop containing
+ * splice_from_pipe_next() and splice_from_pipe_feed() to
+ * initialize the necessary fields of @sd.
+ */
+void splice_from_pipe_begin(struct splice_desc *sd)
+{
+ sd->num_spliced = 0;
+ sd->need_wakeup = false;
+}
+EXPORT_SYMBOL(splice_from_pipe_begin);
+
+/**
+ * splice_from_pipe_end - finish splicing from pipe
+ * @pipe: pipe to splice from
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function will wake up pipe writers if necessary. It should
+ * be called after a loop containing splice_from_pipe_next() and
+ * splice_from_pipe_feed().
+ */
+void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+ if (sd->need_wakeup)
+ wakeup_pipe_writers(pipe);
+}
+EXPORT_SYMBOL(splice_from_pipe_end);
+
+/**
+ * __splice_from_pipe - splice data from a pipe to given actor
+ * @pipe: pipe to splice from
+ * @sd: information to @actor
+ * @actor: handler that splices the data
+ *
+ * Description:
+ * This function does little more than loop over the pipe and call
+ * @actor to do the actual moving of a single struct pipe_buffer to
+ * the desired destination. See pipe_to_file, pipe_to_sendpage, or
+ * pipe_to_user.
+ *
+ */
+ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
+{
+ int ret;
+
+ splice_from_pipe_begin(sd);
+ do {
+ ret = splice_from_pipe_next(pipe, sd);
+ if (ret > 0)
+ ret = splice_from_pipe_feed(pipe, sd, actor);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, sd);
+
+ return sd->num_spliced ? sd->num_spliced : ret;
}
EXPORT_SYMBOL(__splice_from_pipe);
* @actor: handler that splices the data
*
* Description:
- * See __splice_from_pipe. This function locks the input and output inodes,
+ * See __splice_from_pipe. This function locks the pipe inode,
* otherwise it's identical to __splice_from_pipe().
*
*/
splice_actor *actor)
{
ssize_t ret;
- struct inode *inode = out->f_mapping->host;
struct splice_desc sd = {
.total_len = len,
.flags = flags,
.u.file = out,
};
- /*
- * The actor worker might be calling ->write_begin and
- * ->write_end. Most of the time, these expect i_mutex to
- * be held. Since this may result in an ABBA deadlock with
- * pipe->inode, we have to order lock acquiry here.
- *
- * Outer lock must be inode->i_mutex, as pipe_wait() will
- * release and reacquire pipe->inode->i_mutex, AND inode must
- * never be a pipe.
- */
- WARN_ON(S_ISFIFO(inode->i_mode));
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
+ pipe_lock(pipe);
ret = __splice_from_pipe(pipe, &sd, actor);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
- mutex_unlock(&inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
/**
- * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
+ * generic_file_splice_write - splice data from a pipe to a file
* @pipe: pipe info
* @out: file to write to
* @ppos: position in @out
*
* Description:
* Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file. The caller is responsible
- * for acquiring i_mutex on both inodes.
+ * the given pipe inode to the given file.
*
*/
ssize_t
-generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
- loff_t *ppos, size_t len, unsigned int flags)
+generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
+ loff_t *ppos, size_t len, unsigned int flags)
{
struct address_space *mapping = out->f_mapping;
struct inode *inode = mapping->host;
.u.file = out,
};
ssize_t ret;
- int err;
-
- err = file_remove_suid(out);
- if (unlikely(err))
- return err;
-
- ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
- if (ret > 0) {
- unsigned long nr_pages;
- *ppos += ret;
- nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-
- /*
- * If file or inode is SYNC and we actually wrote some data,
- * sync it.
- */
- if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
- err = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
+ pipe_lock(pipe);
- if (err)
- ret = err;
- }
- balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
- }
+ splice_from_pipe_begin(&sd);
+ do {
+ ret = splice_from_pipe_next(pipe, &sd);
+ if (ret <= 0)
+ break;
- return ret;
-}
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+ ret = file_remove_suid(out);
+ if (!ret)
+ ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);
+ mutex_unlock(&inode->i_mutex);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, &sd);
-EXPORT_SYMBOL(generic_file_splice_write_nolock);
+ pipe_unlock(pipe);
-/**
- * generic_file_splice_write - splice data from a pipe to a file
- * @pipe: pipe info
- * @out: file to write to
- * @ppos: position in @out
- * @len: number of bytes to splice
- * @flags: splice modifier flags
- *
- * Description:
- * Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file.
- *
- */
-ssize_t
-generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
- loff_t *ppos, size_t len, unsigned int flags)
-{
- struct address_space *mapping = out->f_mapping;
- struct inode *inode = mapping->host;
- struct splice_desc sd = {
- .total_len = len,
- .flags = flags,
- .pos = *ppos,
- .u.file = out,
- };
- ssize_t ret;
+ if (sd.num_spliced)
+ ret = sd.num_spliced;
- WARN_ON(S_ISFIFO(inode->i_mode));
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
- ret = file_remove_suid(out);
- if (likely(!ret)) {
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
- ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
- }
- mutex_unlock(&inode->i_mutex);
if (ret > 0) {
unsigned long nr_pages;
if (!pipe)
return -EBADF;
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
error = ret = 0;
while (nr_segs) {
iov++;
}
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
if (!ret)
ret = error;
return 0;
ret = 0;
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
while (!pipe->nrbufs) {
if (signal_pending(current)) {
pipe_wait(pipe);
}
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
return 0;
ret = 0;
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
while (pipe->nrbufs >= PIPE_BUFFERS) {
if (!pipe->readers) {
pipe->waiting_writers--;
}
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
/*
* Potential ABBA deadlock, work around it by ordering lock
- * grabbing by inode address. Otherwise two different processes
+ * grabbing by pipe info address. Otherwise two different processes
* could deadlock (one doing tee from A -> B, the other from B -> A).
*/
- inode_double_lock(ipipe->inode, opipe->inode);
+ pipe_double_lock(ipipe, opipe);
do {
if (!opipe->readers) {
if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
ret = -EAGAIN;
- inode_double_unlock(ipipe->inode, opipe->inode);
+ pipe_unlock(ipipe);
+ pipe_unlock(opipe);
/*
* If we put data in the output pipe, wakeup any potential readers.
obj-$(CONFIG_SQUASHFS) += squashfs.o
squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
squashfs-y += namei.o super.o symlink.o
-#squashfs-y += squashfs2_0.o
cache->entries = entries;
cache->block_size = block_size;
cache->pages = block_size >> PAGE_CACHE_SHIFT;
+ cache->pages = cache->pages ? cache->pages : 1;
cache->name = name;
cache->num_waiters = 0;
spin_lock_init(&cache->lock);
if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE)
goto failed_mount;
+ /*
+ * Check the system page size is not larger than the filesystem
+ * block size (by default 128K). This is currently not supported.
+ */
+ if (PAGE_CACHE_SIZE > msblk->block_size) {
+ ERROR("Page size > filesystem block size (%d). This is "
+ "currently not supported!\n", msblk->block_size);
+ goto failed_mount;
+ }
+
msblk->block_log = le16_to_cpu(sblk->block_log);
if (msblk->block_log > SQUASHFS_FILE_MAX_LOG)
goto failed_mount;
EXPORT_SYMBOL(vfs_getattr);
-int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
+int vfs_fstat(unsigned int fd, struct kstat *stat)
{
- struct path path;
- int error;
+ struct file *f = fget(fd);
+ int error = -EBADF;
- error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
- if (!error) {
- error = vfs_getattr(path.mnt, path.dentry, stat);
- path_put(&path);
+ if (f) {
+ error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
+ fput(f);
}
return error;
}
+EXPORT_SYMBOL(vfs_fstat);
-int vfs_stat(char __user *name, struct kstat *stat)
+int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
{
- return vfs_stat_fd(AT_FDCWD, name, stat);
-}
+ struct path path;
+ int error = -EINVAL;
+ int lookup_flags = 0;
-EXPORT_SYMBOL(vfs_stat);
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
-int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
-{
- struct path path;
- int error;
+ if (!(flag & AT_SYMLINK_NOFOLLOW))
+ lookup_flags |= LOOKUP_FOLLOW;
- error = user_path_at(dfd, name, 0, &path);
- if (!error) {
- error = vfs_getattr(path.mnt, path.dentry, stat);
- path_put(&path);
- }
+ error = user_path_at(dfd, filename, lookup_flags, &path);
+ if (error)
+ goto out;
+
+ error = vfs_getattr(path.mnt, path.dentry, stat);
+ path_put(&path);
+out:
return error;
}
+EXPORT_SYMBOL(vfs_fstatat);
-int vfs_lstat(char __user *name, struct kstat *stat)
+int vfs_stat(char __user *name, struct kstat *stat)
{
- return vfs_lstat_fd(AT_FDCWD, name, stat);
+ return vfs_fstatat(AT_FDCWD, name, stat, 0);
}
+EXPORT_SYMBOL(vfs_stat);
-EXPORT_SYMBOL(vfs_lstat);
-
-int vfs_fstat(unsigned int fd, struct kstat *stat)
+int vfs_lstat(char __user *name, struct kstat *stat)
{
- struct file *f = fget(fd);
- int error = -EBADF;
-
- if (f) {
- error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
- fput(f);
- }
- return error;
+ return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
}
+EXPORT_SYMBOL(vfs_lstat);
-EXPORT_SYMBOL(vfs_fstat);
#ifdef __ARCH_WANT_OLD_STAT
SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_old_stat(&stat, statbuf);
+ error = vfs_stat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_old_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_old_stat(&stat, statbuf);
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_old_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
-
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ int error = vfs_stat(filename, &stat);
- return error;
+ if (error)
+ return error;
+ return cp_new_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_new_stat(&stat, statbuf);
}
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
struct stat __user *, statbuf, int, flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_new_stat(&stat, statbuf);
}
#endif
struct stat64 __user *, statbuf, int, flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_new_stat64(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_new_stat64(&stat, statbuf);
}
#endif /* __ARCH_WANT_STAT64 */
EXPORT_SYMBOL(deactivate_super);
+/**
+ * deactivate_locked_super - drop an active reference to superblock
+ * @s: superblock to deactivate
+ *
+ * Equivalent of up_write(&s->s_umount); deactivate_super(s);, except that
+ * it does not unlock it until it's all over. As the result, it's safe to
+ * use to dispose of new superblock on ->get_sb() failure exits - nobody
+ * will see the sucker until it's all over. Equivalent using up_write +
+ * deactivate_super is safe for that purpose only if superblock is either
+ * safe to use or has NULL ->s_root when we unlock.
+ */
+void deactivate_locked_super(struct super_block *s)
+{
+ struct file_system_type *fs = s->s_type;
+ if (atomic_dec_and_lock(&s->s_active, &sb_lock)) {
+ s->s_count -= S_BIAS-1;
+ spin_unlock(&sb_lock);
+ vfs_dq_off(s, 0);
+ fs->kill_sb(s);
+ put_filesystem(fs);
+ put_super(s);
+ } else {
+ up_write(&s->s_umount);
+ }
+}
+
+EXPORT_SYMBOL(deactivate_locked_super);
+
/**
* grab_super - acquire an active reference
* @s: reference we are trying to make active
sb->s_flags = flags;
err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
}
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -EBUSY;
goto error_bdev;
}
sb_set_blocksize(s, block_size(bdev));
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto error;
}
struct block_device *bdev = sb->s_bdev;
fmode_t mode = sb->s_mode;
- bdev->bd_super = 0;
+ bdev->bd_super = NULL;
generic_shutdown_super(sb);
sync_blockdev(bdev);
close_bdev_exclusive(bdev, mode);
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
s->s_flags |= MS_ACTIVE;
s->s_flags = flags;
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
s->s_flags |= MS_ACTIVE;
return mnt;
out_sb:
dput(mnt->mnt_root);
- up_write(&mnt->mnt_sb->s_umount);
- deactivate_super(mnt->mnt_sb);
+ deactivate_locked_super(mnt->mnt_sb);
out_free_secdata:
free_secdata(secdata);
out_mnt:
count = size - offs;
}
- temp = kmalloc(count, GFP_KERNEL);
- if (!temp)
- return -ENOMEM;
-
- if (copy_from_user(temp, userbuf, count)) {
- count = -EFAULT;
- goto out_free;
- }
+ temp = memdup_user(userbuf, count);
+ if (IS_ERR(temp))
+ return PTR_ERR(temp);
mutex_lock(&bb->mutex);
if (count > 0)
*off = offs + count;
-out_free:
- kfree(temp);
return count;
}
if (buffer->event != atomic_read(&od->event))
goto trigger;
- return 0;
+ return DEFAULT_POLLMASK;
trigger:
buffer->needs_read_fill = 1;
- return POLLERR|POLLPRI;
+ return DEFAULT_POLLMASK|POLLERR|POLLPRI;
}
void sysfs_notify_dirent(struct sysfs_dirent *sd)
struct work_struct work;
};
+static struct workqueue_struct *sysfs_workqueue;
static DEFINE_MUTEX(sysfs_workq_mutex);
static LIST_HEAD(sysfs_workq);
static void sysfs_schedule_callback_work(struct work_struct *work)
mutex_lock(&sysfs_workq_mutex);
list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list)
if (ss->kobj == kobj) {
+ module_put(owner);
mutex_unlock(&sysfs_workq_mutex);
return -EAGAIN;
}
mutex_unlock(&sysfs_workq_mutex);
+ if (sysfs_workqueue == NULL) {
+ sysfs_workqueue = create_singlethread_workqueue("sysfsd");
+ if (sysfs_workqueue == NULL) {
+ module_put(owner);
+ return -ENOMEM;
+ }
+ }
+
ss = kmalloc(sizeof(*ss), GFP_KERNEL);
if (!ss) {
module_put(owner);
mutex_lock(&sysfs_workq_mutex);
list_add_tail(&ss->workq_list, &sysfs_workq);
mutex_unlock(&sysfs_workq_mutex);
- schedule_work(&ss->work);
+ queue_work(sysfs_workqueue, &ss->work);
return 0;
}
EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
return 0;
out_deact:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
out_close:
ubi_close_volume(ubi);
return err;
const struct file_operations ufs_dir_operations = {
.read = generic_read_dir,
.readdir = ufs_readdir,
- .fsync = file_fsync,
+ .fsync = ufs_sync_file,
.llseek = generic_file_llseek,
};
#include "ufs.h"
-static int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
{
struct inode *inode = dentry->d_inode;
int err;
/* file.c */
extern const struct inode_operations ufs_file_inode_operations;
extern const struct file_operations ufs_file_operations;
-
extern const struct address_space_operations ufs_aops;
+extern int ufs_sync_file(struct file *, struct dentry *, int);
/* ialloc.c */
extern void ufs_free_inode (struct inode *inode);
if (size) {
if (size > XATTR_SIZE_MAX)
return -E2BIG;
- kvalue = kmalloc(size, GFP_KERNEL);
- if (!kvalue)
- return -ENOMEM;
- if (copy_from_user(kvalue, value, size)) {
- kfree(kvalue);
- return -EFAULT;
- }
+ kvalue = memdup_user(value, size);
+ if (IS_ERR(kvalue))
+ return PTR_ERR(kvalue);
}
error = vfs_setxattr(d, kname, kvalue, size, flags);
static inline int
kmem_shake_allow(gfp_t gfp_mask)
{
- return (gfp_mask & __GFP_WAIT) != 0;
+ return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS));
}
#endif /* __XFS_SUPPORT_KMEM_H__ */
return mp->m_ddev_targp->bt_bdev;
}
-/*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
- */
-STATIC void
-xfs_finish_ioend(
- xfs_ioend_t *ioend,
- int wait)
-{
- if (atomic_dec_and_test(&ioend->io_remaining)) {
- queue_work(xfsdatad_workqueue, &ioend->io_work);
- if (wait)
- flush_workqueue(xfsdatad_workqueue);
- }
-}
-
/*
* We're now finished for good with this ioend structure.
* Update the page state via the associated buffer_heads,
xfs_destroy_ioend(ioend);
}
+/*
+ * Schedule IO completion handling on a xfsdatad if this was
+ * the final hold on this ioend. If we are asked to wait,
+ * flush the workqueue.
+ */
+STATIC void
+xfs_finish_ioend(
+ xfs_ioend_t *ioend,
+ int wait)
+{
+ if (atomic_dec_and_test(&ioend->io_remaining)) {
+ struct workqueue_struct *wq = xfsdatad_workqueue;
+ if (ioend->io_work.func == xfs_end_bio_unwritten)
+ wq = xfsconvertd_workqueue;
+
+ queue_work(wq, &ioend->io_work);
+ if (wait)
+ flush_workqueue(wq);
+ }
+}
+
/*
* Allocate and initialise an IO completion structure.
* We need to track unwritten extent write completion here initially.
#define __XFS_AOPS_H__
extern struct workqueue_struct *xfsdatad_workqueue;
+extern struct workqueue_struct *xfsconvertd_workqueue;
extern mempool_t *xfs_ioend_pool;
/*
static struct workqueue_struct *xfslogd_workqueue;
struct workqueue_struct *xfsdatad_workqueue;
+struct workqueue_struct *xfsconvertd_workqueue;
#ifdef XFS_BUF_TRACE
void
xfs_buf_t *bp, *n;
int pincount = 0;
+ xfs_buf_runall_queues(xfsconvertd_workqueue);
xfs_buf_runall_queues(xfsdatad_workqueue);
xfs_buf_runall_queues(xfslogd_workqueue);
if (!xfsdatad_workqueue)
goto out_destroy_xfslogd_workqueue;
+ xfsconvertd_workqueue = create_workqueue("xfsconvertd");
+ if (!xfsconvertd_workqueue)
+ goto out_destroy_xfsdatad_workqueue;
+
register_shrinker(&xfs_buf_shake);
return 0;
+ out_destroy_xfsdatad_workqueue:
+ destroy_workqueue(xfsdatad_workqueue);
out_destroy_xfslogd_workqueue:
destroy_workqueue(xfslogd_workqueue);
out_free_buf_zone:
xfs_buf_terminate(void)
{
unregister_shrinker(&xfs_buf_shake);
+ destroy_workqueue(xfsconvertd_workqueue);
destroy_workqueue(xfsdatad_workqueue);
destroy_workqueue(xfslogd_workqueue);
kmem_zone_destroy(xfs_buf_zone);
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- ret = filemap_fdatawrite(mapping);
- if (flags & XFS_B_ASYNC)
- return -ret;
- ret2 = filemap_fdatawait(mapping);
- if (!ret)
- ret = ret2;
+ ret = -filemap_fdatawrite(mapping);
}
- return -ret;
+ if (flags & XFS_B_ASYNC)
+ return ret;
+ ret2 = xfs_wait_on_pages(ip, first, last);
+ if (!ret)
+ ret = ret2;
+ return ret;
}
int
if (len > XATTR_SIZE_MAX)
return EINVAL;
- kbuf = kmalloc(len, GFP_KERNEL);
- if (!kbuf)
- return ENOMEM;
-
- if (copy_from_user(kbuf, ubuf, len))
- goto out_kfree;
+ kbuf = memdup_user(ubuf, len);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
error = xfs_attr_set(XFS_I(inode), name, kbuf, len, flags);
- out_kfree:
- kfree(kbuf);
return error;
}
if (!size || size > 16 * PAGE_SIZE)
goto out_dput;
- error = ENOMEM;
- ops = kmalloc(size, GFP_KERNEL);
- if (!ops)
+ ops = memdup_user(am_hreq.ops, size);
+ if (IS_ERR(ops)) {
+ error = PTR_ERR(ops);
goto out_dput;
-
- error = EFAULT;
- if (copy_from_user(ops, am_hreq.ops, size))
- goto out_kfree_ops;
+ }
attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
if (!attr_name)
goto out_kfree_ops;
-
error = 0;
for (i = 0; i < am_hreq.opcount; i++) {
ops[i].am_error = strncpy_from_user(attr_name,
if (!size || size > 16 * PAGE_SIZE)
goto out_dput;
- error = ENOMEM;
- ops = kmalloc(size, GFP_KERNEL);
- if (!ops)
+ ops = memdup_user(compat_ptr(am_hreq.ops), size);
+ if (IS_ERR(ops)) {
+ error = PTR_ERR(ops);
goto out_dput;
-
- error = EFAULT;
- if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
- goto out_kfree_ops;
+ }
attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
if (!attr_name)
goto out_kfree_ops;
-
error = 0;
for (i = 0; i < am_hreq.opcount; i++) {
ops[i].am_error = strncpy_from_user(attr_name,
goto relock;
}
} else {
+ int enospc = 0;
+ ssize_t ret2 = 0;
+
+write_retry:
xfs_rw_enter_trace(XFS_WRITE_ENTER, xip, (void *)iovp, segs,
*offset, ioflags);
- ret = generic_file_buffered_write(iocb, iovp, segs,
+ ret2 = generic_file_buffered_write(iocb, iovp, segs,
pos, offset, count, ret);
+ /*
+ * if we just got an ENOSPC, flush the inode now we
+ * aren't holding any page locks and retry *once*
+ */
+ if (ret2 == -ENOSPC && !enospc) {
+ error = xfs_flush_pages(xip, 0, -1, 0, FI_NONE);
+ if (error)
+ goto out_unlock_internal;
+ enospc = 1;
+ goto write_retry;
+ }
+ ret = ret2;
}
current->backing_dev_info = NULL;
uint32_t first_index = 0;
int error = 0;
int last_error = 0;
- int fflag = XFS_B_ASYNC;
-
- if (flags & SYNC_DELWRI)
- fflag = XFS_B_DELWRI;
- if (flags & SYNC_WAIT)
- fflag = 0; /* synchronous overrides all */
do {
struct inode *inode;
* If we have to flush data or wait for I/O completion
* we need to hold the iolock.
*/
- if ((flags & SYNC_DELWRI) && VN_DIRTY(inode)) {
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- lock_flags |= XFS_IOLOCK_SHARED;
- error = xfs_flush_pages(ip, 0, -1, fflag, FI_NONE);
- if (flags & SYNC_IOWAIT)
+ if (flags & SYNC_DELWRI) {
+ if (VN_DIRTY(inode)) {
+ if (flags & SYNC_TRYLOCK) {
+ if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
+ lock_flags |= XFS_IOLOCK_SHARED;
+ } else {
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ lock_flags |= XFS_IOLOCK_SHARED;
+ }
+ if (lock_flags & XFS_IOLOCK_SHARED) {
+ error = xfs_flush_pages(ip, 0, -1,
+ (flags & SYNC_WAIT) ? 0
+ : XFS_B_ASYNC,
+ FI_NONE);
+ }
+ }
+ if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
xfs_ioend_wait(ip);
}
xfs_ilock(ip, XFS_ILOCK_SHARED);
xfs_syncd_queue_work(
struct xfs_mount *mp,
void *data,
- void (*syncer)(struct xfs_mount *, void *))
+ void (*syncer)(struct xfs_mount *, void *),
+ struct completion *completion)
{
- struct bhv_vfs_sync_work *work;
+ struct xfs_sync_work *work;
- work = kmem_alloc(sizeof(struct bhv_vfs_sync_work), KM_SLEEP);
+ work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP);
INIT_LIST_HEAD(&work->w_list);
work->w_syncer = syncer;
work->w_data = data;
work->w_mount = mp;
+ work->w_completion = completion;
spin_lock(&mp->m_sync_lock);
list_add_tail(&work->w_list, &mp->m_sync_list);
spin_unlock(&mp->m_sync_lock);
* heads, looking about for more room...
*/
STATIC void
-xfs_flush_inode_work(
- struct xfs_mount *mp,
- void *arg)
-{
- struct inode *inode = arg;
- filemap_flush(inode->i_mapping);
- iput(inode);
-}
-
-void
-xfs_flush_inode(
- xfs_inode_t *ip)
-{
- struct inode *inode = VFS_I(ip);
-
- igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
- delay(msecs_to_jiffies(500));
-}
-
-/*
- * This is the "bigger hammer" version of xfs_flush_inode_work...
- * (IOW, "If at first you don't succeed, use a Bigger Hammer").
- */
-STATIC void
-xfs_flush_device_work(
+xfs_flush_inodes_work(
struct xfs_mount *mp,
void *arg)
{
struct inode *inode = arg;
- sync_blockdev(mp->m_super->s_bdev);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
iput(inode);
}
void
-xfs_flush_device(
+xfs_flush_inodes(
xfs_inode_t *ip)
{
struct inode *inode = VFS_I(ip);
+ DECLARE_COMPLETION_ONSTACK(completion);
igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
- delay(msecs_to_jiffies(500));
+ xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion);
+ wait_for_completion(&completion);
xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC);
}
{
struct xfs_mount *mp = arg;
long timeleft;
- bhv_vfs_sync_work_t *work, *n;
+ xfs_sync_work_t *work, *n;
LIST_HEAD (tmp);
set_freezable();
list_del(&work->w_list);
if (work == &mp->m_sync_work)
continue;
+ if (work->w_completion)
+ complete(work->w_completion);
kmem_free(work);
}
}
{
mp->m_sync_work.w_syncer = xfs_sync_worker;
mp->m_sync_work.w_mount = mp;
+ mp->m_sync_work.w_completion = NULL;
mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd");
if (IS_ERR(mp->m_sync_task))
return -PTR_ERR(mp->m_sync_task);
struct xfs_mount;
struct xfs_perag;
-typedef struct bhv_vfs_sync_work {
+typedef struct xfs_sync_work {
struct list_head w_list;
struct xfs_mount *w_mount;
void *w_data; /* syncer routine argument */
void (*w_syncer)(struct xfs_mount *, void *);
-} bhv_vfs_sync_work_t;
+ struct completion *w_completion;
+} xfs_sync_work_t;
#define SYNC_ATTR 0x0001 /* sync attributes */
#define SYNC_DELWRI 0x0002 /* look at delayed writes */
#define SYNC_WAIT 0x0004 /* wait for i/o to complete */
#define SYNC_BDFLUSH 0x0008 /* BDFLUSH is calling -- don't block */
#define SYNC_IOWAIT 0x0010 /* wait for all I/O to complete */
+#define SYNC_TRYLOCK 0x0020 /* only try to lock inodes */
int xfs_syncd_init(struct xfs_mount *mp);
void xfs_syncd_stop(struct xfs_mount *mp);
int xfs_quiesce_data(struct xfs_mount *mp);
void xfs_quiesce_attr(struct xfs_mount *mp);
-void xfs_flush_inode(struct xfs_inode *ip);
-void xfs_flush_device(struct xfs_inode *ip);
+void xfs_flush_inodes(struct xfs_inode *ip);
int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
void *arg) /* formatter arg */
{
__int64_t bmvend; /* last block requested */
- int error; /* return value */
+ int error = 0; /* return value */
__int64_t fixlen; /* length for -1 case */
int i; /* extent number */
int lock; /* lock state */
int nexleft; /* # of user extents left */
int subnex; /* # of bmapi's can do */
int nmap; /* number of map entries */
- struct getbmapx out; /* output structure */
+ struct getbmapx *out; /* output structure */
int whichfork; /* data or attr fork */
int prealloced; /* this is a file with
* preallocated data space */
int iflags; /* interface flags */
int bmapi_flags; /* flags for xfs_bmapi */
+ int cur_ext = 0;
mp = ip->i_mount;
iflags = bmv->bmv_iflags;
-
whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
- /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not
- * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ
- * bit is set for the file, generate a read event in order
- * that the DMAPI application may do its thing before we return
- * the extents. Usually this means restoring user file data to
- * regions of the file that look like holes.
- *
- * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
- * BMV_IF_NO_DMAPI_READ so that read events are generated.
- * If this were not true, callers of ioctl( XFS_IOC_GETBMAP )
- * could misinterpret holes in a DMAPI file as true holes,
- * when in fact they may represent offline user data.
- */
- if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 &&
- DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
- whichfork == XFS_DATA_FORK) {
- error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
- if (error)
- return XFS_ERROR(error);
- }
-
if (whichfork == XFS_ATTR_FORK) {
if (XFS_IFORK_Q(ip)) {
if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS &&
ip->i_mount);
return XFS_ERROR(EFSCORRUPTED);
}
- } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
- ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
- return XFS_ERROR(EINVAL);
- if (whichfork == XFS_DATA_FORK) {
+
+ prealloced = 0;
+ fixlen = 1LL << 32;
+ } else {
+ /*
+ * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
+ * not generate a DMAPI read event. Otherwise, if the
+ * DM_EVENT_READ bit is set for the file, generate a read
+ * event in order that the DMAPI application may do its thing
+ * before we return the extents. Usually this means restoring
+ * user file data to regions of the file that look like holes.
+ *
+ * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
+ * BMV_IF_NO_DMAPI_READ so that read events are generated.
+ * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
+ * could misinterpret holes in a DMAPI file as true holes,
+ * when in fact they may represent offline user data.
+ */
+ if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
+ !(iflags & BMV_IF_NO_DMAPI_READ)) {
+ error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
+ 0, 0, 0, NULL);
+ if (error)
+ return XFS_ERROR(error);
+ }
+
+ if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
+ ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
+ ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
+ return XFS_ERROR(EINVAL);
+
if (xfs_get_extsz_hint(ip) ||
ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){
prealloced = 1;
prealloced = 0;
fixlen = ip->i_size;
}
- } else {
- prealloced = 0;
- fixlen = 1LL << 32;
}
if (bmv->bmv_length == -1) {
fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen));
- bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset),
- (__int64_t)0);
- } else if (bmv->bmv_length < 0)
- return XFS_ERROR(EINVAL);
- if (bmv->bmv_length == 0) {
+ bmv->bmv_length =
+ max_t(__int64_t, fixlen - bmv->bmv_offset, 0);
+ } else if (bmv->bmv_length == 0) {
bmv->bmv_entries = 0;
return 0;
+ } else if (bmv->bmv_length < 0) {
+ return XFS_ERROR(EINVAL);
}
+
nex = bmv->bmv_count - 1;
if (nex <= 0)
return XFS_ERROR(EINVAL);
bmvend = bmv->bmv_offset + bmv->bmv_length;
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- if (((iflags & BMV_IF_DELALLOC) == 0) &&
- (whichfork == XFS_DATA_FORK) &&
- (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) {
- /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */
- error = xfs_flush_pages(ip, (xfs_off_t)0,
- -1, 0, FI_REMAPF);
- if (error) {
- xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- return error;
+ if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx))
+ return XFS_ERROR(ENOMEM);
+ out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL);
+ if (!out)
+ return XFS_ERROR(ENOMEM);
+
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) {
+ if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) {
+ error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF);
+ if (error)
+ goto out_unlock_iolock;
}
- }
- ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) ||
- ip->i_delayed_blks == 0);
+ ASSERT(ip->i_delayed_blks == 0);
+ }
lock = xfs_ilock_map_shared(ip);
if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
- bmapi_flags = xfs_bmapi_aflag(whichfork) |
- ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
+ bmapi_flags = xfs_bmapi_aflag(whichfork);
+ if (!(iflags & BMV_IF_PREALLOC))
+ bmapi_flags |= XFS_BMAPI_IGSTATE;
/*
* Allocate enough space to handle "subnex" maps at a time.
*/
+ error = ENOMEM;
subnex = 16;
- map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP);
+ map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+ if (!map)
+ goto out_unlock_ilock;
bmv->bmv_entries = 0;
- if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) {
- if (((iflags & BMV_IF_DELALLOC) == 0) ||
- whichfork == XFS_ATTR_FORK) {
- error = 0;
- goto unlock_and_return;
- }
+ if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 &&
+ (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) {
+ error = 0;
+ goto out_free_map;
}
nexleft = nex;
bmapi_flags, NULL, 0, map, &nmap,
NULL, NULL);
if (error)
- goto unlock_and_return;
+ goto out_free_map;
ASSERT(nmap <= subnex);
for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
- out.bmv_oflags = 0;
+ out[cur_ext].bmv_oflags = 0;
if (map[i].br_state == XFS_EXT_UNWRITTEN)
- out.bmv_oflags |= BMV_OF_PREALLOC;
+ out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC;
else if (map[i].br_startblock == DELAYSTARTBLOCK)
- out.bmv_oflags |= BMV_OF_DELALLOC;
- out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff);
- out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
- out.bmv_unused1 = out.bmv_unused2 = 0;
+ out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC;
+ out[cur_ext].bmv_offset =
+ XFS_FSB_TO_BB(mp, map[i].br_startoff);
+ out[cur_ext].bmv_length =
+ XFS_FSB_TO_BB(mp, map[i].br_blockcount);
+ out[cur_ext].bmv_unused1 = 0;
+ out[cur_ext].bmv_unused2 = 0;
ASSERT(((iflags & BMV_IF_DELALLOC) != 0) ||
(map[i].br_startblock != DELAYSTARTBLOCK));
if (map[i].br_startblock == HOLESTARTBLOCK &&
whichfork == XFS_ATTR_FORK) {
/* came to the end of attribute fork */
- out.bmv_oflags |= BMV_OF_LAST;
- goto unlock_and_return;
- } else {
- int full = 0; /* user array is full */
-
- if (!xfs_getbmapx_fix_eof_hole(ip, &out,
- prealloced, bmvend,
- map[i].br_startblock)) {
- goto unlock_and_return;
- }
-
- /* format results & advance arg */
- error = formatter(&arg, &out, &full);
- if (error || full)
- goto unlock_and_return;
- nexleft--;
- bmv->bmv_offset =
- out.bmv_offset + out.bmv_length;
- bmv->bmv_length = MAX((__int64_t)0,
- (__int64_t)(bmvend - bmv->bmv_offset));
- bmv->bmv_entries++;
+ out[cur_ext].bmv_oflags |= BMV_OF_LAST;
+ goto out_free_map;
}
+
+ if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext],
+ prealloced, bmvend,
+ map[i].br_startblock))
+ goto out_free_map;
+
+ nexleft--;
+ bmv->bmv_offset =
+ out[cur_ext].bmv_offset +
+ out[cur_ext].bmv_length;
+ bmv->bmv_length =
+ max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
+ bmv->bmv_entries++;
+ cur_ext++;
}
} while (nmap && nexleft && bmv->bmv_length);
-unlock_and_return:
+ out_free_map:
+ kmem_free(map);
+ out_unlock_ilock:
xfs_iunlock_map_shared(ip, lock);
+ out_unlock_iolock:
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- kmem_free(map);
+ for (i = 0; i < cur_ext; i++) {
+ int full = 0; /* user array is full */
+
+ /* format results & advance arg */
+ error = formatter(&arg, &out[i], &full);
+ if (error || full)
+ break;
+ }
return error;
}
error = xfs_trans_commit(tp, XFS_TRANS_SWAPEXT);
-out_unlock:
- xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
out:
kmem_free(tempifp);
return error;
+out_unlock:
+ xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ goto out;
+
out_trans_cancel:
xfs_trans_cancel(tp, 0);
goto out_unlock;
nagcount = new + (nb_mod != 0);
if (nb_mod && nb_mod < XFS_MIN_AG_BLOCKS) {
nagcount--;
- nb = nagcount * mp->m_sb.sb_agblocks;
+ nb = (xfs_rfsblock_t)nagcount * mp->m_sb.sb_agblocks;
if (nb < mp->m_sb.sb_dblocks)
return XFS_ERROR(EINVAL);
}
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- /*
- * initialise the VFS inode here to get failures
- * out of the way early.
- */
- if (!inode_init_always(mp->m_super, VFS_I(ip))) {
- kmem_zone_free(xfs_inode_zone, ip);
- return NULL;
- }
-
/* initialise the xfs inode */
ip->i_ino = ino;
ip->i_mount = mp;
#ifdef XFS_DIR2_TRACE
ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
#endif
+ /*
+ * Now initialise the VFS inode. We do this after the xfs_inode
+ * initialisation as internal failures will result in ->destroy_inode
+ * being called and that will pass down through the reclaim path and
+ * free the XFS inode. This path requires the XFS inode to already be
+ * initialised. Hence if this call fails, the xfs_inode has already
+ * been freed and we should not reference it at all in the error
+ * handling.
+ */
+ if (!inode_init_always(mp->m_super, VFS_I(ip)))
+ return NULL;
+
+ /* prevent anyone from using this yet */
+ VFS_I(ip)->i_state = I_NEW|I_LOCK;
return ip;
}
* necessary.
*/
if (ip->i_df.if_flags & XFS_IFEXTENTS) {
+ xfs_ilock(ip, XFS_ILOCK_SHARED);
error = xfs_bmap_last_offset(NULL, ip, &last_block,
XFS_DATA_FORK);
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (error) {
last_block = 0;
}
return 0;
}
-STATIC int
-xfs_flush_space(
- xfs_inode_t *ip,
- int *fsynced,
- int *ioflags)
-{
- switch (*fsynced) {
- case 0:
- if (ip->i_delayed_blks) {
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_inode(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 1;
- } else {
- *ioflags |= BMAPI_SYNC;
- *fsynced = 2;
- }
- return 0;
- case 1:
- *fsynced = 2;
- *ioflags |= BMAPI_SYNC;
- return 0;
- case 2:
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_device(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 3;
- return 0;
- }
- return 1;
-}
-
STATIC int
xfs_cmn_err_fsblock_zero(
xfs_inode_t *ip,
}
/*
- * If the caller is doing a write at the end of the file,
- * then extend the allocation out to the file system's write
- * iosize. We clean up any extra space left over when the
- * file is closed in xfs_inactive().
- *
- * For sync writes, we are flushing delayed allocate space to
- * try to make additional space available for allocation near
- * the filesystem full boundary - preallocation hurts in that
- * situation, of course.
+ * If the caller is doing a write at the end of the file, then extend the
+ * allocation out to the file system's write iosize. We clean up any extra
+ * space left over when the file is closed in xfs_inactive().
*/
STATIC int
xfs_iomap_eof_want_preallocate(
int n, error, imaps;
*prealloc = 0;
- if ((ioflag & BMAPI_SYNC) || (offset + count) <= ip->i_size)
+ if ((offset + count) <= ip->i_size)
return 0;
/*
xfs_extlen_t extsz;
int nimaps;
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
- int prealloc, fsynced = 0;
+ int prealloc, flushed = 0;
int error;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
extsz = xfs_get_extsz_hint(ip);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
-retry:
error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
ioflag, imap, XFS_WRITE_IMAPS, &prealloc);
if (error)
return error;
+retry:
if (prealloc) {
aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
/*
* If bmapi returned us nothing, and if we didn't get back EDQUOT,
- * then we must have run out of space - flush delalloc, and retry..
+ * then we must have run out of space - flush all other inodes with
+ * delalloc blocks and retry without EOF preallocation.
*/
if (nimaps == 0) {
xfs_iomap_enter_trace(XFS_IOMAP_WRITE_NOSPACE,
ip, offset, count);
- if (xfs_flush_space(ip, &fsynced, &ioflag))
+ if (flushed)
return XFS_ERROR(ENOSPC);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_flush_inodes(ip);
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+
+ flushed = 1;
error = 0;
+ prealloc = 0;
goto retry;
}
BMAPI_IGNSTATE = (1 << 4), /* ignore unwritten state on read */
BMAPI_DIRECT = (1 << 5), /* direct instead of buffered write */
BMAPI_MMAP = (1 << 6), /* allocate for mmap write */
- BMAPI_SYNC = (1 << 7), /* sync write to flush delalloc space */
- BMAPI_TRYLOCK = (1 << 8), /* non-blocking request */
+ BMAPI_TRYLOCK = (1 << 7), /* non-blocking request */
} bmapi_flags_t;
}
mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks);
- if (!mp->m_log) {
- cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!");
- error = ENOMEM;
+ if (IS_ERR(mp->m_log)) {
+ error = -PTR_ERR(mp->m_log);
goto out;
}
xfs_buf_t *bp;
int i;
int iclogsize;
+ int error = ENOMEM;
log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL);
- if (!log)
- return NULL;
+ if (!log) {
+ xlog_warn("XFS: Log allocation failed: No memory!");
+ goto out;
+ }
log->l_mp = mp;
log->l_targ = log_target;
log->l_grant_reserve_cycle = 1;
log->l_grant_write_cycle = 1;
+ error = EFSCORRUPTED;
if (xfs_sb_version_hassector(&mp->m_sb)) {
log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
- ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
+ if (log->l_sectbb_log < 0 ||
+ log->l_sectbb_log > mp->m_sectbb_log) {
+ xlog_warn("XFS: Log sector size (0x%x) out of range.",
+ log->l_sectbb_log);
+ goto out_free_log;
+ }
+
/* for larger sector sizes, must have v2 or external log */
- ASSERT(log->l_sectbb_log == 0 ||
- log->l_logBBstart == 0 ||
- xfs_sb_version_haslogv2(&mp->m_sb));
- ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
+ if (log->l_sectbb_log != 0 &&
+ (log->l_logBBstart != 0 &&
+ !xfs_sb_version_haslogv2(&mp->m_sb))) {
+ xlog_warn("XFS: log sector size (0x%x) invalid "
+ "for configuration.", log->l_sectbb_log);
+ goto out_free_log;
+ }
+ if (mp->m_sb.sb_logsectlog < BBSHIFT) {
+ xlog_warn("XFS: Log sector log (0x%x) too small.",
+ mp->m_sb.sb_logsectlog);
+ goto out_free_log;
+ }
}
log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
xlog_get_iclog_buffer_size(mp, log);
+ error = ENOMEM;
bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp);
if (!bp)
goto out_free_log;
xfs_buf_free(log->l_xbuf);
out_free_log:
kmem_free(log);
- return NULL;
+out:
+ return ERR_PTR(-error);
} /* xlog_alloc_log */
xlog_ins_ticketq(&log->l_reserve_headq, tic);
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: sleep 2");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_reserve_headq, tic);
* for more free space, otherwise try to get some space for
* this transaction.
*/
-
+ need_bytes = tic->t_unit_res;
if ((ntic = log->l_write_headq)) {
free_bytes = xlog_space_left(log, log->l_grant_write_cycle,
log->l_grant_write_bytes);
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: sleep 1");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT,
&log->l_grant_lock, s);
/* If we're shutting down, this tic is already
* off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 1");
- xlog_grant_push_ail(log->l_mp, tic->t_unit_res);
- spin_lock(&log->l_grant_lock);
}
}
- need_bytes = tic->t_unit_res;
-
redo:
if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
if (free_bytes < need_bytes) {
if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
xlog_ins_ticketq(&log->l_write_headq, tic);
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
/* If we're shutting down, this tic is already off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_write_headq, tic);
sbp->sb_sectsize > XFS_MAX_SECTORSIZE ||
sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG ||
sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG ||
+ sbp->sb_sectsize != (1 << sbp->sb_sectlog) ||
sbp->sb_blocksize < XFS_MIN_BLOCKSIZE ||
sbp->sb_blocksize > XFS_MAX_BLOCKSIZE ||
sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG ||
sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG ||
+ sbp->sb_blocksize != (1 << sbp->sb_blocklog) ||
sbp->sb_inodesize < XFS_DINODE_MIN_SIZE ||
sbp->sb_inodesize > XFS_DINODE_MAX_SIZE ||
sbp->sb_inodelog < XFS_DINODE_MIN_LOG ||
sbp->sb_inodelog > XFS_DINODE_MAX_LOG ||
+ sbp->sb_inodesize != (1 << sbp->sb_inodelog) ||
(sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) ||
(sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) ||
(sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) ||
#endif
struct xfs_mru_cache *m_filestream; /* per-mount filestream data */
struct task_struct *m_sync_task; /* generalised sync thread */
- bhv_vfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
+ xfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
struct list_head m_sync_list; /* sync thread work item list */
spinlock_t m_sync_lock; /* work item list lock */
int m_sync_seq; /* sync thread generation no. */
error = xfs_trans_reserve(tp, resblks, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
if (error == ENOSPC) {
+ /* flush outstanding delalloc blocks and retry */
+ xfs_flush_inodes(dp);
+ error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT);
+ }
+ if (error == ENOSPC) {
+ /* No space at all so try a "no-allocation" reservation */
resblks = 0;
error = xfs_trans_reserve(tp, 0, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
struct list_head children;
struct list_head node;
struct list_head wakeup_list;
- struct list_head g_list;
struct acpi_device_status status;
struct acpi_device_flags flags;
struct acpi_device_pnp pnp;
struct acpi_processor_cx *state;
unsigned long bm_check_timestamp;
u32 default_state;
- u32 bm_activity;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
int timer_broadcast_on_state;
#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
extern int acpi_video_register(void);
+extern int acpi_video_exit(void);
#else
static inline int acpi_video_register(void) { return 0; }
+static inline void acpi_video_exit(void) { return; }
#endif
#endif
+++ /dev/null
-arch
-mach-types.h
+++ /dev/null
-include include/asm-generic/Kbuild.asm
-
-header-y += registers.h
-
-unifdef-y += termios.h
+++ /dev/null
-/* atomic.h: atomic operation emulation for FR-V
- *
- * For an explanation of how atomic ops work in this arch, see:
- * Documentation/frv/atomic-ops.txt
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_ATOMIC_H
-#define _ASM_ATOMIC_H
-
-#include <linux/types.h>
-#include <asm/spr-regs.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_SMP
-#error not SMP safe
-#endif
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- *
- * We do not have SMP systems, so we don't have to deal with that.
- */
-
-/* Atomic operations are already serializing */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#define ATOMIC_INIT(i) { (i) }
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long val;
-
- asm("0: \n"
- " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
- " ckeq icc3,cc7 \n"
- " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
- " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
- " add%I2 %1,%2,%1 \n"
- " cst.p %1,%M0 ,cc3,#1 \n"
- " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
- " beq icc3,#0,0b \n"
- : "+U"(v->counter), "=&r"(val)
- : "NPr"(i)
- : "memory", "cc7", "cc3", "icc3"
- );
-
- return val;
-}
-
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- unsigned long val;
-
- asm("0: \n"
- " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
- " ckeq icc3,cc7 \n"
- " ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
- " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
- " sub%I2 %1,%2,%1 \n"
- " cst.p %1,%M0 ,cc3,#1 \n"
- " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
- " beq icc3,#0,0b \n"
- : "+U"(v->counter), "=&r"(val)
- : "NPr"(i)
- : "memory", "cc7", "cc3", "icc3"
- );
-
- return val;
-}
-
-#else
-
-extern int atomic_add_return(int i, atomic_t *v);
-extern int atomic_sub_return(int i, atomic_t *v);
-
-#endif
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
- return atomic_add_return(i, v) < 0;
-}
-
-static inline void atomic_add(int i, atomic_t *v)
-{
- atomic_add_return(i, v);
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
- atomic_sub_return(i, v);
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
- atomic_add_return(1, v);
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
- atomic_sub_return(1, v);
-}
-
-#define atomic_dec_return(v) atomic_sub_return(1, (v))
-#define atomic_inc_return(v) atomic_add_return(1, (v))
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-
-/*****************************************************************************/
-/*
- * exchange value with memory
- */
-#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
-
-#define xchg(ptr, x) \
-({ \
- __typeof__(ptr) __xg_ptr = (ptr); \
- __typeof__(*(ptr)) __xg_orig; \
- \
- switch (sizeof(__xg_orig)) { \
- case 4: \
- asm volatile( \
- "swap%I0 %M0,%1" \
- : "+m"(*__xg_ptr), "=r"(__xg_orig) \
- : "1"(x) \
- : "memory" \
- ); \
- break; \
- \
- default: \
- __xg_orig = (__typeof__(__xg_orig))0; \
- asm volatile("break"); \
- break; \
- } \
- \
- __xg_orig; \
-})
-
-#else
-
-extern uint32_t __xchg_32(uint32_t i, volatile void *v);
-
-#define xchg(ptr, x) \
-({ \
- __typeof__(ptr) __xg_ptr = (ptr); \
- __typeof__(*(ptr)) __xg_orig; \
- \
- switch (sizeof(__xg_orig)) { \
- case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr); break; \
- default: \
- __xg_orig = (__typeof__(__xg_orig))0; \
- asm volatile("break"); \
- break; \
- } \
- __xg_orig; \
-})
-
-#endif
-
-#define tas(ptr) (xchg((ptr), 1))
-
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-#include <asm-generic/atomic.h>
-#endif /* _ASM_ATOMIC_H */
+++ /dev/null
-#ifndef __FRV_AUXVEC_H
-#define __FRV_AUXVEC_H
-
-#endif
+++ /dev/null
-/* ax88796.h: access points to the driver for the AX88796 NE2000 clone
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_AX88796_H
-#define _ASM_AX88796_H
-
-#include <asm/mb-regs.h>
-
-#define AX88796_IOADDR (__region_CS1 + 0x200)
-#define AX88796_IRQ IRQ_CPU_EXTERNAL7
-#define AX88796_FULL_DUPLEX 0 /* force full duplex */
-#define AX88796_BUS_INFO "CS1#+0x200" /* bus info for ethtool */
-
-#endif /* _ASM_AX88796_H */
+++ /dev/null
-/* bitops.h: bit operations for the Fujitsu FR-V CPUs
- *
- * For an explanation of how atomic ops work in this arch, see:
- * Documentation/frv/atomic-ops.txt
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_BITOPS_H
-#define _ASM_BITOPS_H
-
-#include <linux/compiler.h>
-#include <asm/byteorder.h>
-
-#ifdef __KERNEL__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <asm-generic/bitops/ffz.h>
-
-/*
- * clear_bit() doesn't provide any barrier for the compiler.
- */
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
-static inline
-unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v)
-{
- unsigned long old, tmp;
-
- asm volatile(
- "0: \n"
- " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
- " ckeq icc3,cc7 \n"
- " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */
- " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
- " and%I3 %1,%3,%2 \n"
- " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */
- " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */
- " beq icc3,#0,0b \n"
- : "+U"(*v), "=&r"(old), "=r"(tmp)
- : "NPr"(~mask)
- : "memory", "cc7", "cc3", "icc3"
- );
-
- return old;
-}
-
-static inline
-unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v)
-{
- unsigned long old, tmp;
-
- asm volatile(
- "0: \n"
- " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
- " ckeq icc3,cc7 \n"
- " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */
- " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
- " or%I3 %1,%3,%2 \n"
- " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */
- " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */
- " beq icc3,#0,0b \n"
- : "+U"(*v), "=&r"(old), "=r"(tmp)
- : "NPr"(mask)
- : "memory", "cc7", "cc3", "icc3"
- );
-
- return old;
-}
-
-static inline
-unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v)
-{
- unsigned long old, tmp;
-
- asm volatile(
- "0: \n"
- " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
- " ckeq icc3,cc7 \n"
- " ld.p %M0,%1 \n" /* LD.P/ORCR are atomic */
- " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
- " xor%I3 %1,%3,%2 \n"
- " cst.p %2,%M0 ,cc3,#1 \n" /* if store happens... */
- " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* ... clear ICC3.Z */
- " beq icc3,#0,0b \n"
- : "+U"(*v), "=&r"(old), "=r"(tmp)
- : "NPr"(mask)
- : "memory", "cc7", "cc3", "icc3"
- );
-
- return old;
-}
-
-#else
-
-extern unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v);
-extern unsigned long atomic_test_and_OR_mask(unsigned long mask, volatile unsigned long *v);
-extern unsigned long atomic_test_and_XOR_mask(unsigned long mask, volatile unsigned long *v);
-
-#endif
-
-#define atomic_clear_mask(mask, v) atomic_test_and_ANDNOT_mask((mask), (v))
-#define atomic_set_mask(mask, v) atomic_test_and_OR_mask((mask), (v))
-
-static inline int test_and_clear_bit(int nr, volatile void *addr)
-{
- volatile unsigned long *ptr = addr;
- unsigned long mask = 1UL << (nr & 31);
- ptr += nr >> 5;
- return (atomic_test_and_ANDNOT_mask(mask, ptr) & mask) != 0;
-}
-
-static inline int test_and_set_bit(int nr, volatile void *addr)
-{
- volatile unsigned long *ptr = addr;
- unsigned long mask = 1UL << (nr & 31);
- ptr += nr >> 5;
- return (atomic_test_and_OR_mask(mask, ptr) & mask) != 0;
-}
-
-static inline int test_and_change_bit(int nr, volatile void *addr)
-{
- volatile unsigned long *ptr = addr;
- unsigned long mask = 1UL << (nr & 31);
- ptr += nr >> 5;
- return (atomic_test_and_XOR_mask(mask, ptr) & mask) != 0;
-}
-
-static inline void clear_bit(int nr, volatile void *addr)
-{
- test_and_clear_bit(nr, addr);
-}
-
-static inline void set_bit(int nr, volatile void *addr)
-{
- test_and_set_bit(nr, addr);
-}
-
-static inline void change_bit(int nr, volatile void * addr)
-{
- test_and_change_bit(nr, addr);
-}
-
-static inline void __clear_bit(int nr, volatile void * addr)
-{
- volatile unsigned long *a = addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 31);
- *a &= ~mask;
-}
-
-static inline void __set_bit(int nr, volatile void * addr)
-{
- volatile unsigned long *a = addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 31);
- *a |= mask;
-}
-
-static inline void __change_bit(int nr, volatile void *addr)
-{
- volatile unsigned long *a = addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 31);
- *a ^= mask;
-}
-
-static inline int __test_and_clear_bit(int nr, volatile void * addr)
-{
- volatile unsigned long *a = addr;
- int mask, retval;
-
- a += nr >> 5;
- mask = 1 << (nr & 31);
- retval = (mask & *a) != 0;
- *a &= ~mask;
- return retval;
-}
-
-static inline int __test_and_set_bit(int nr, volatile void * addr)
-{
- volatile unsigned long *a = addr;
- int mask, retval;
-
- a += nr >> 5;
- mask = 1 << (nr & 31);
- retval = (mask & *a) != 0;
- *a |= mask;
- return retval;
-}
-
-static inline int __test_and_change_bit(int nr, volatile void * addr)
-{
- volatile unsigned long *a = addr;
- int mask, retval;
-
- a += nr >> 5;
- mask = 1 << (nr & 31);
- retval = (mask & *a) != 0;
- *a ^= mask;
- return retval;
-}
-
-/*
- * This routine doesn't need to be atomic.
- */
-static inline int __constant_test_bit(int nr, const volatile void * addr)
-{
- return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static inline int __test_bit(int nr, const volatile void * addr)
-{
- int * a = (int *) addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- return ((mask & *a) != 0);
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- __constant_test_bit((nr),(addr)) : \
- __test_bit((nr),(addr)))
-
-#include <asm-generic/bitops/find.h>
-
-/**
- * fls - find last bit set
- * @x: the word to search
- *
- * This is defined the same way as ffs:
- * - return 32..1 to indicate bit 31..0 most significant bit set
- * - return 0 to indicate no bits set
- */
-#define fls(x) \
-({ \
- int bit; \
- \
- asm(" subcc %1,gr0,gr0,icc0 \n" \
- " ckne icc0,cc4 \n" \
- " cscan.p %1,gr0,%0 ,cc4,#1 \n" \
- " csub %0,%0,%0 ,cc4,#0 \n" \
- " csub %2,%0,%0 ,cc4,#1 \n" \
- : "=&r"(bit) \
- : "r"(x), "r"(32) \
- : "icc0", "cc4" \
- ); \
- \
- bit; \
-})
-
-/**
- * fls64 - find last bit set in a 64-bit value
- * @n: the value to search
- *
- * This is defined the same way as ffs:
- * - return 64..1 to indicate bit 63..0 most significant bit set
- * - return 0 to indicate no bits set
- */
-static inline __attribute__((const))
-int fls64(u64 n)
-{
- union {
- u64 ll;
- struct { u32 h, l; };
- } _;
- int bit, x, y;
-
- _.ll = n;
-
- asm(" subcc.p %3,gr0,gr0,icc0 \n"
- " subcc %4,gr0,gr0,icc1 \n"
- " ckne icc0,cc4 \n"
- " ckne icc1,cc5 \n"
- " norcr cc4,cc5,cc6 \n"
- " csub.p %0,%0,%0 ,cc6,1 \n"
- " orcr cc5,cc4,cc4 \n"
- " andcr cc4,cc5,cc4 \n"
- " cscan.p %3,gr0,%0 ,cc4,0 \n"
- " setlos #64,%1 \n"
- " cscan.p %4,gr0,%0 ,cc4,1 \n"
- " setlos #32,%2 \n"
- " csub.p %1,%0,%0 ,cc4,0 \n"
- " csub %2,%0,%0 ,cc4,1 \n"
- : "=&r"(bit), "=r"(x), "=r"(y)
- : "0r"(_.h), "r"(_.l)
- : "icc0", "icc1", "cc4", "cc5", "cc6"
- );
- return bit;
-
-}
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * - return 32..1 to indicate bit 31..0 most least significant bit set
- * - return 0 to indicate no bits set
- */
-static inline __attribute__((const))
-int ffs(int x)
-{
- /* Note: (x & -x) gives us a mask that is the least significant
- * (rightmost) 1-bit of the value in x.
- */
- return fls(x & -x);
-}
-
-/**
- * __ffs - find first bit set
- * @x: the word to search
- *
- * - return 31..0 to indicate bit 31..0 most least significant bit set
- * - if no bits are set in x, the result is undefined
- */
-static inline __attribute__((const))
-int __ffs(unsigned long x)
-{
- int bit;
- asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x));
- return 31 - bit;
-}
-
-/**
- * __fls - find last (most-significant) set bit in a long word
- * @word: the word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
- unsigned long bit;
- asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word));
- return bit;
-}
-
-/*
- * special slimline version of fls() for calculating ilog2_u32()
- * - note: no protection against n == 0
- */
-#define ARCH_HAS_ILOG2_U32
-static inline __attribute__((const))
-int __ilog2_u32(u32 n)
-{
- int bit;
- asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n));
- return 31 - bit;
-}
-
-/*
- * special slimline version of fls64() for calculating ilog2_u64()
- * - note: no protection against n == 0
- */
-#define ARCH_HAS_ILOG2_U64
-static inline __attribute__((const))
-int __ilog2_u64(u64 n)
-{
- union {
- u64 ll;
- struct { u32 h, l; };
- } _;
- int bit, x, y;
-
- _.ll = n;
-
- asm(" subcc %3,gr0,gr0,icc0 \n"
- " ckeq icc0,cc4 \n"
- " cscan.p %3,gr0,%0 ,cc4,0 \n"
- " setlos #63,%1 \n"
- " cscan.p %4,gr0,%0 ,cc4,1 \n"
- " setlos #31,%2 \n"
- " csub.p %1,%0,%0 ,cc4,0 \n"
- " csub %2,%0,%0 ,cc4,1 \n"
- : "=&r"(bit), "=r"(x), "=r"(y)
- : "0r"(_.h), "r"(_.l)
- : "icc0", "cc4"
- );
- return bit;
-}
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-
-#define ext2_set_bit_atomic(lock,nr,addr) test_and_set_bit ((nr) ^ 0x18, (addr))
-#define ext2_clear_bit_atomic(lock,nr,addr) test_and_clear_bit((nr) ^ 0x18, (addr))
-
-#include <asm-generic/bitops/minix-le.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_BITOPS_H */
+++ /dev/null
-/* bug.h: FRV bug trapping
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_BUG_H
-#define _ASM_BUG_H
-
-#include <linux/linkage.h>
-
-#ifdef CONFIG_BUG
-/*
- * Tell the user there is some problem.
- */
-extern asmlinkage void __debug_bug_trap(int signr);
-
-#ifdef CONFIG_NO_KERNEL_MSG
-#define _debug_bug_printk()
-#else
-extern void __debug_bug_printk(const char *file, unsigned line);
-#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__)
-#endif
-
-#define _debug_bug_trap(signr) \
-do { \
- __debug_bug_trap(signr); \
- asm volatile("nop"); \
-} while(0)
-
-#define HAVE_ARCH_BUG
-#define BUG() \
-do { \
- _debug_bug_printk(); \
- _debug_bug_trap(6 /*SIGABRT*/); \
-} while (0)
-
-#ifdef CONFIG_GDBSTUB
-#define HAVE_ARCH_KGDB_RAISE
-#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0)
-
-#define HAVE_ARCH_KGDB_BAD_PAGE
-#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
-#endif
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif
+++ /dev/null
-/* bugs.h: arch bug checking entry
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-static inline void check_bugs(void)
-{
-}
+++ /dev/null
-/* busctl-regs.h: FR400-series CPU bus controller registers
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_BUSCTL_REGS_H
-#define _ASM_BUSCTL_REGS_H
-
-/* bus controller registers */
-#define __get_LGCR() ({ *(volatile unsigned long *)(0xfe000010); })
-#define __get_LMAICR() ({ *(volatile unsigned long *)(0xfe000030); })
-#define __get_LEMBR() ({ *(volatile unsigned long *)(0xfe000040); })
-#define __get_LEMAM() ({ *(volatile unsigned long *)(0xfe000048); })
-#define __get_LCR(R) ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); })
-#define __get_LSBR(R) ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); })
-#define __get_LSAM(R) ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); })
-
-#define __set_LGCR(V) do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0)
-#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0)
-#define __set_LEMBR(V) do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0)
-#define __set_LEMAM(V) do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0)
-#define __set_LCR(R,V) do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0)
-#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0)
-#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0)
-
-/* FR401 SDRAM controller registers */
-#define __get_DBR(R) ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); })
-#define __get_DAM(R) ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); })
-
-/* FR551 SDRAM controller registers */
-#define __get_DARS(R) ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); })
-#define __get_DAMK(R) ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); })
-
-
-#endif /* _ASM_BUSCTL_REGS_H */
+++ /dev/null
-#ifndef _ASM_BYTEORDER_H
-#define _ASM_BYTEORDER_H
-
-#include <linux/byteorder/big_endian.h>
-
-#endif /* _ASM_BYTEORDER_H */
+++ /dev/null
-/* cache.h: FRV cache definitions
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASM_CACHE_H
-#define __ASM_CACHE_H
-
-
-/* bytes per L1 cache line */
-#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT)
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES)))
-#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES)))
-
-#endif
+++ /dev/null
-/* cacheflush.h: FRV cache flushing routines
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_CACHEFLUSH_H
-#define _ASM_CACHEFLUSH_H
-
-/* Keep includes the same across arches. */
-#include <linux/mm.h>
-
-/*
- * virtually-indexed cache management (our cache is physically indexed)
- */
-#define flush_cache_all() do {} while(0)
-#define flush_cache_mm(mm) do {} while(0)
-#define flush_cache_dup_mm(mm) do {} while(0)
-#define flush_cache_range(mm, start, end) do {} while(0)
-#define flush_cache_page(vma, vmaddr, pfn) do {} while(0)
-#define flush_cache_vmap(start, end) do {} while(0)
-#define flush_cache_vunmap(start, end) do {} while(0)
-#define flush_dcache_mmap_lock(mapping) do {} while(0)
-#define flush_dcache_mmap_unlock(mapping) do {} while(0)
-
-/*
- * physically-indexed cache management
- * - see arch/frv/lib/cache.S
- */
-extern void frv_dcache_writeback(unsigned long start, unsigned long size);
-extern void frv_cache_invalidate(unsigned long start, unsigned long size);
-extern void frv_icache_invalidate(unsigned long start, unsigned long size);
-extern void frv_cache_wback_inv(unsigned long start, unsigned long size);
-
-static inline void __flush_cache_all(void)
-{
- asm volatile(" dcef @(gr0,gr0),#1 \n"
- " icei @(gr0,gr0),#1 \n"
- " membar \n"
- : : : "memory"
- );
-}
-
-/* dcache/icache coherency... */
-#ifdef CONFIG_MMU
-extern void flush_dcache_page(struct page *page);
-#else
-static inline void flush_dcache_page(struct page *page)
-{
- unsigned long addr = page_to_phys(page);
- frv_dcache_writeback(addr, addr + PAGE_SIZE);
-}
-#endif
-
-static inline void flush_page_to_ram(struct page *page)
-{
- flush_dcache_page(page);
-}
-
-static inline void flush_icache(void)
-{
- __flush_cache_all();
-}
-
-static inline void flush_icache_range(unsigned long start, unsigned long end)
-{
- frv_cache_wback_inv(start, end);
-}
-
-#ifdef CONFIG_MMU
-extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
- unsigned long start, unsigned long len);
-#else
-static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
- unsigned long start, unsigned long len)
-{
- frv_cache_wback_inv(start, start + len);
-}
-#endif
-
-static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page)
-{
- flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE);
-}
-
-/*
- * permit ptrace to access another process's address space through the icache
- * and the dcache
- */
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { \
- memcpy((dst), (src), (len)); \
- flush_icache_user_range((vma), (page), (vaddr), (len)); \
-} while(0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy((dst), (src), (len))
-
-#endif /* _ASM_CACHEFLUSH_H */
+++ /dev/null
-/* checksum.h: FRV checksumming
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_CHECKSUM_H
-#define _ASM_CHECKSUM_H
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum, int *csum_err);
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- *
- */
-static inline
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- unsigned int tmp, inc, sum = 0;
-
- asm(" addcc gr0,gr0,gr0,icc0\n" /* clear icc0.C */
- " subi %1,#4,%1 \n"
- "0: \n"
- " ldu.p @(%1,%3),%4 \n"
- " subicc %2,#1,%2,icc1 \n"
- " addxcc.p %4,%0,%0,icc0 \n"
- " bhi icc1,#2,0b \n"
-
- /* fold the 33-bit result into 16-bits */
- " addxcc gr0,%0,%0,icc0 \n"
- " srli %0,#16,%1 \n"
- " sethi #0,%0 \n"
- " add %1,%0,%0 \n"
- " srli %0,#16,%1 \n"
- " add %1,%0,%0 \n"
-
- : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
- : "0" (sum), "1" (iph), "2" (ihl), "3" (4),
- "m"(*(volatile struct { int _[100]; } *)iph)
- : "icc0", "icc1", "memory"
- );
-
- return (__force __sum16)~sum;
-}
-
-/*
- * Fold a partial checksum
- */
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned int tmp;
-
- asm(" srli %0,#16,%1 \n"
- " sethi #0,%0 \n"
- " add %1,%0,%0 \n"
- " srli %0,#16,%1 \n"
- " add %1,%0,%0 \n"
- : "=r"(sum), "=&r"(tmp)
- : "0"(sum)
- );
-
- return (__force __sum16)~sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- asm(" addcc %1,%0,%0,icc0 \n"
- " addxcc %2,%0,%0,icc0 \n"
- " addxcc %3,%0,%0,icc0 \n"
- " addxcc gr0,%0,%0,icc0 \n"
- : "=r" (sum)
- : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum)
- : "icc0"
- );
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16
-csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
- __u32 len, unsigned short proto, __wsum sum)
-{
- unsigned long tmp, tmp2;
-
- asm(" addcc %2,%0,%0,icc0 \n"
-
- /* add up the source addr */
- " ldi @(%3,0),%1 \n"
- " addxcc %1,%0,%0,icc0 \n"
- " ldi @(%3,4),%2 \n"
- " addxcc %2,%0,%0,icc0 \n"
- " ldi @(%3,8),%1 \n"
- " addxcc %1,%0,%0,icc0 \n"
- " ldi @(%3,12),%2 \n"
- " addxcc %2,%0,%0,icc0 \n"
-
- /* add up the dest addr */
- " ldi @(%4,0),%1 \n"
- " addxcc %1,%0,%0,icc0 \n"
- " ldi @(%4,4),%2 \n"
- " addxcc %2,%0,%0,icc0 \n"
- " ldi @(%4,8),%1 \n"
- " addxcc %1,%0,%0,icc0 \n"
- " ldi @(%4,12),%2 \n"
- " addxcc %2,%0,%0,icc0 \n"
-
- /* fold the 33-bit result into 16-bits */
- " addxcc gr0,%0,%0,icc0 \n"
- " srli %0,#16,%1 \n"
- " sethi #0,%0 \n"
- " add %1,%0,%0 \n"
- " srli %0,#16,%1 \n"
- " add %1,%0,%0 \n"
-
- : "=r" (sum), "=&r" (tmp), "=r" (tmp2)
- : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto)
- : "icc0"
- );
-
- return (__force __sum16)~sum;
-}
-
-#endif /* _ASM_CHECKSUM_H */
+++ /dev/null
-/* cpu-irqs.h: on-CPU peripheral irqs
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_CPU_IRQS_H
-#define _ASM_CPU_IRQS_H
-
-#ifndef __ASSEMBLY__
-
-/* IRQ to level mappings */
-#define IRQ_GDBSTUB_LEVEL 15
-#define IRQ_UART_LEVEL 13
-
-#ifdef CONFIG_GDBSTUB_UART0
-#define IRQ_UART0_LEVEL IRQ_GDBSTUB_LEVEL
-#else
-#define IRQ_UART0_LEVEL IRQ_UART_LEVEL
-#endif
-
-#ifdef CONFIG_GDBSTUB_UART1
-#define IRQ_UART1_LEVEL IRQ_GDBSTUB_LEVEL
-#else
-#define IRQ_UART1_LEVEL IRQ_UART_LEVEL
-#endif
-
-#define IRQ_DMA0_LEVEL 14
-#define IRQ_DMA1_LEVEL 14
-#define IRQ_DMA2_LEVEL 14
-#define IRQ_DMA3_LEVEL 14
-#define IRQ_DMA4_LEVEL 14
-#define IRQ_DMA5_LEVEL 14
-#define IRQ_DMA6_LEVEL 14
-#define IRQ_DMA7_LEVEL 14
-
-#define IRQ_TIMER0_LEVEL 12
-#define IRQ_TIMER1_LEVEL 11
-#define IRQ_TIMER2_LEVEL 10
-
-#define IRQ_XIRQ0_LEVEL 1
-#define IRQ_XIRQ1_LEVEL 2
-#define IRQ_XIRQ2_LEVEL 3
-#define IRQ_XIRQ3_LEVEL 4
-#define IRQ_XIRQ4_LEVEL 5
-#define IRQ_XIRQ5_LEVEL 6
-#define IRQ_XIRQ6_LEVEL 7
-#define IRQ_XIRQ7_LEVEL 8
-
-/* IRQ IDs presented to drivers */
-#define IRQ_CPU__UNUSED IRQ_BASE_CPU
-#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL)
-#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL)
-#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL)
-#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL)
-#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL)
-#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL)
-#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL)
-#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL)
-#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL)
-#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL)
-#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL)
-#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL)
-#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL)
-#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL)
-#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL)
-#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL)
-#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL)
-#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL)
-#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL)
-#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL)
-#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_CPU_IRQS_H */
+++ /dev/null
-#ifndef _ASM_CPUMASK_H
-#define _ASM_CPUMASK_H
-
-#include <asm-generic/cpumask.h>
-
-#endif /* _ASM_CPUMASK_H */
+++ /dev/null
-#ifndef _ASM_CPUTIME_H
-#define _ASM_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* _ASM_CPUTIME_H */
+++ /dev/null
-/* current.h: FRV current task pointer
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_CURRENT_H
-#define _ASM_CURRENT_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * dedicate GR29 to keeping the current task pointer
- */
-register struct task_struct *current asm("gr29");
-
-#define get_current() current
-
-#else
-
-#define CURRENT gr29
-
-#endif
-
-#endif /* _ASM_CURRENT_H */
+++ /dev/null
-/* delay.h: FRV delay code
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_DELAY_H
-#define _ASM_DELAY_H
-
-#include <asm/param.h>
-#include <asm/timer-regs.h>
-
-/*
- * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop]
- */
-extern unsigned long __delay_loops_MHz;
-
-static inline void __delay(unsigned long loops)
-{
- asm volatile("1: subicc %0,#1,%0,icc0 \n"
- " bnc icc0,#2,1b \n"
- : "=r" (loops)
- : "0" (loops)
- : "icc0"
- );
-}
-
-/*
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
- __delay(usecs * __delay_loops_MHz);
-}
-
-#define ndelay(n) udelay((n) * 5)
-
-#endif /* _ASM_DELAY_H */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-/* dm9000.h: Davicom DM9000 adapter configuration
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_DM9000_H
-#define _ASM_DM9000_H
-
-#include <asm/mb-regs.h>
-
-#define DM9000_ARCH_IOBASE (__region_CS6 + 0x300)
-#define DM9000_ARCH_IRQ IRQ_CPU_EXTERNAL3 /* XIRQ #3 (shared with FPGA) */
-#undef DM9000_ARCH_IRQ_ACTLOW /* IRQ pin active high */
-#define DM9000_ARCH_BUS_INFO "CS6#+0x300" /* bus info for ethtool */
-
-#undef __is_PCI_IO
-#define __is_PCI_IO(addr) 0 /* not PCI */
-
-#undef inl
-#define inl(addr) \
-({ \
- unsigned long __ioaddr = (unsigned long) addr; \
- uint32_t x = readl(__ioaddr); \
- ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff); \
-})
-
-#undef insl
-#define insl(a,b,l) __insl(a,b,l,0) /* don't byte-swap */
-
-
-#endif /* _ASM_DM9000_H */
+++ /dev/null
-#ifndef _ASM_DMA_MAPPING_H
-#define _ASM_DMA_MAPPING_H
-
-#include <linux/device.h>
-#include <asm/cache.h>
-#include <asm/cacheflush.h>
-#include <asm/scatterlist.h>
-#include <asm/io.h>
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
-
-extern unsigned long __nongprelbss dma_coherent_mem_start;
-extern unsigned long __nongprelbss dma_coherent_mem_end;
-
-void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp);
-void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single is performed.
- */
-extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction direction);
-
-/*
- * Unmap a single streaming mode DMA translation. The dma_addr and size
- * must match what was provided for in a previous pci_map_single call. All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
-static inline
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-}
-
-/*
- * Map a set of buffers described by scatterlist in streaming
- * mode for DMA. This is the scather-gather version of the
- * above pci_map_single interface. Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length. They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- * DMA address/length pairs than there are SG table elements.
- * (for example via virtual mapping capabilities)
- * The routine returns the number of addr/length pairs actually
- * used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
- enum dma_data_direction direction);
-
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-}
-
-extern
-dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset,
- size_t size, enum dma_data_direction direction);
-
-static inline
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-}
-
-
-static inline
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
- enum dma_data_direction direction)
-{
- flush_write_buffers();
-}
-
-static inline
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- flush_write_buffers();
-}
-
-static inline
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
- enum dma_data_direction direction)
-{
- flush_write_buffers();
-}
-
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
-static inline
-int dma_supported(struct device *dev, u64 mask)
-{
- /*
- * we fall back to GFP_DMA when the mask isn't all 1s,
- * so we can't guarantee allocations that must be
- * within a tighter range than GFP_DMA..
- */
- if (mask < 0x00ffffff)
- return 0;
-
- return 1;
-}
-
-static inline
-int dma_set_mask(struct device *dev, u64 mask)
-{
- if (!dev->dma_mask || !dma_supported(dev, mask))
- return -EIO;
-
- *dev->dma_mask = mask;
-
- return 0;
-}
-
-static inline
-int dma_get_cache_alignment(void)
-{
- return 1 << L1_CACHE_SHIFT;
-}
-
-#define dma_is_consistent(d, h) (1)
-
-static inline
-void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- enum dma_data_direction direction)
-{
- flush_write_buffers();
-}
-
-#endif /* _ASM_DMA_MAPPING_H */
+++ /dev/null
-/* dma.h: FRV DMA controller management
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-//#define DMA_DEBUG 1
-
-#include <linux/interrupt.h>
-
-#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */
-
-/* under 2.4 this is actually needed by the new bootmem allocator */
-#define MAX_DMA_ADDRESS PAGE_OFFSET
-
-/*
- * FRV DMA controller management
- */
-typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data);
-
-extern void frv_dma_init(void);
-
-extern int frv_dma_open(const char *devname,
- unsigned long dmamask,
- int dmacap,
- dma_irq_handler_t handler,
- unsigned long irq_flags,
- void *data);
-
-/* channels required */
-#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */
-
-/* capabilities required */
-#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */
-#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */
-#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */
-
-extern void frv_dma_close(int dma);
-
-extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr);
-
-extern void frv_dma_start(int dma,
- unsigned long sba, unsigned long dba,
- unsigned long pix, unsigned long six, unsigned long bcl);
-
-extern void frv_dma_restart_circular(int dma, unsigned long six);
-
-extern void frv_dma_stop(int dma);
-
-extern int is_frv_dma_interrupting(int dma);
-
-extern void frv_dma_dump(int dma);
-
-extern void frv_dma_status_clear(int dma);
-
-#define FRV_DMA_NCHANS 8
-#define FRV_DMA_4CHANS 4
-#define FRV_DMA_8CHANS 8
-
-#define DMAC_CCFRx 0x00 /* channel configuration reg */
-#define DMAC_CCFRx_CM_SHIFT 16
-#define DMAC_CCFRx_CM_DA 0x00000000
-#define DMAC_CCFRx_CM_SCA 0x00010000
-#define DMAC_CCFRx_CM_DCA 0x00020000
-#define DMAC_CCFRx_CM_2D 0x00030000
-#define DMAC_CCFRx_ATS_SHIFT 8
-#define DMAC_CCFRx_RS_INTERN 0x00000000
-#define DMAC_CCFRx_RS_EXTERN 0x00000001
-#define DMAC_CCFRx_RS_SHIFT 0
-
-#define DMAC_CSTRx 0x08 /* channel status reg */
-#define DMAC_CSTRx_FS 0x0000003f
-#define DMAC_CSTRx_NE 0x00000100
-#define DMAC_CSTRx_FED 0x00000200
-#define DMAC_CSTRx_WER 0x00000800
-#define DMAC_CSTRx_RER 0x00001000
-#define DMAC_CSTRx_CE 0x00002000
-#define DMAC_CSTRx_INT 0x00800000
-#define DMAC_CSTRx_BUSY 0x80000000
-
-#define DMAC_CCTRx 0x10 /* channel control reg */
-#define DMAC_CCTRx_DSIZ_1 0x00000000
-#define DMAC_CCTRx_DSIZ_2 0x00000001
-#define DMAC_CCTRx_DSIZ_4 0x00000002
-#define DMAC_CCTRx_DSIZ_32 0x00000005
-#define DMAC_CCTRx_DAU_HOLD 0x00000000
-#define DMAC_CCTRx_DAU_INC 0x00000010
-#define DMAC_CCTRx_DAU_DEC 0x00000020
-#define DMAC_CCTRx_SSIZ_1 0x00000000
-#define DMAC_CCTRx_SSIZ_2 0x00000100
-#define DMAC_CCTRx_SSIZ_4 0x00000200
-#define DMAC_CCTRx_SSIZ_32 0x00000500
-#define DMAC_CCTRx_SAU_HOLD 0x00000000
-#define DMAC_CCTRx_SAU_INC 0x00001000
-#define DMAC_CCTRx_SAU_DEC 0x00002000
-#define DMAC_CCTRx_FC 0x08000000
-#define DMAC_CCTRx_ICE 0x10000000
-#define DMAC_CCTRx_IE 0x40000000
-#define DMAC_CCTRx_ACT 0x80000000
-
-#define DMAC_SBAx 0x18 /* source base address reg */
-#define DMAC_DBAx 0x20 /* data base address reg */
-#define DMAC_PIXx 0x28 /* primary index reg */
-#define DMAC_SIXx 0x30 /* secondary index reg */
-#define DMAC_BCLx 0x38 /* byte count limit reg */
-#define DMAC_APRx 0x40 /* alternate pointer reg */
-
-/*
- * required for PCI + MODULES
- */
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_DMA_H */
+++ /dev/null
-/* elf.h: FR-V ELF definitions
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-m68knommu/elf.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_ELF_H
-#define __ASM_ELF_H
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-struct elf32_hdr;
-
-/*
- * ELF header e_flags defines.
- */
-#define EF_FRV_GPR_MASK 0x00000003 /* mask for # of gprs */
-#define EF_FRV_GPR32 0x00000001 /* Only uses GR on 32-register */
-#define EF_FRV_GPR64 0x00000002 /* Only uses GR on 64-register */
-#define EF_FRV_FPR_MASK 0x0000000c /* mask for # of fprs */
-#define EF_FRV_FPR32 0x00000004 /* Only uses FR on 32-register */
-#define EF_FRV_FPR64 0x00000008 /* Only uses FR on 64-register */
-#define EF_FRV_FPR_NONE 0x0000000C /* Uses software floating-point */
-#define EF_FRV_DWORD_MASK 0x00000030 /* mask for dword support */
-#define EF_FRV_DWORD_YES 0x00000010 /* Assumes stack aligned to 8-byte boundaries. */
-#define EF_FRV_DWORD_NO 0x00000020 /* Assumes stack aligned to 4-byte boundaries. */
-#define EF_FRV_DOUBLE 0x00000040 /* Uses double instructions. */
-#define EF_FRV_MEDIA 0x00000080 /* Uses media instructions. */
-#define EF_FRV_PIC 0x00000100 /* Uses position independent code. */
-#define EF_FRV_NON_PIC_RELOCS 0x00000200 /* Does not use position Independent code. */
-#define EF_FRV_MULADD 0x00000400 /* -mmuladd */
-#define EF_FRV_BIGPIC 0x00000800 /* -fPIC */
-#define EF_FRV_LIBPIC 0x00001000 /* -mlibrary-pic */
-#define EF_FRV_G0 0x00002000 /* -G 0, no small data ptr */
-#define EF_FRV_NOPACK 0x00004000 /* -mnopack */
-#define EF_FRV_FDPIC 0x00008000 /* -mfdpic */
-#define EF_FRV_CPU_MASK 0xff000000 /* specific cpu bits */
-#define EF_FRV_CPU_GENERIC 0x00000000 /* Set CPU type is FR-V */
-#define EF_FRV_CPU_FR500 0x01000000 /* Set CPU type is FR500 */
-#define EF_FRV_CPU_FR300 0x02000000 /* Set CPU type is FR300 */
-#define EF_FRV_CPU_SIMPLE 0x03000000 /* SIMPLE */
-#define EF_FRV_CPU_TOMCAT 0x04000000 /* Tomcat, FR500 prototype */
-#define EF_FRV_CPU_FR400 0x05000000 /* Set CPU type is FR400 */
-#define EF_FRV_CPU_FR550 0x06000000 /* Set CPU type is FR550 */
-#define EF_FRV_CPU_FR405 0x07000000 /* Set CPU type is FR405 */
-#define EF_FRV_CPU_FR450 0x08000000 /* Set CPU type is FR450 */
-
-/*
- * FR-V ELF relocation types
- */
-
-
-/*
- * ELF register definitions..
- */
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpmedia_regs elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-extern int elf_check_arch(const struct elf32_hdr *hdr);
-
-#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS))
-#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2MSB
-#define ELF_ARCH EM_FRV
-
-#define ELF_PLAT_INIT(_r) \
-do { \
- __kernel_frame0_ptr->gr16 = 0; \
- __kernel_frame0_ptr->gr17 = 0; \
- __kernel_frame0_ptr->gr18 = 0; \
- __kernel_frame0_ptr->gr19 = 0; \
- __kernel_frame0_ptr->gr20 = 0; \
- __kernel_frame0_ptr->gr21 = 0; \
- __kernel_frame0_ptr->gr22 = 0; \
- __kernel_frame0_ptr->gr23 = 0; \
- __kernel_frame0_ptr->gr24 = 0; \
- __kernel_frame0_ptr->gr25 = 0; \
- __kernel_frame0_ptr->gr26 = 0; \
- __kernel_frame0_ptr->gr27 = 0; \
- __kernel_frame0_ptr->gr29 = 0; \
-} while(0)
-
-#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \
-do { \
- __kernel_frame0_ptr->gr16 = _exec_map_addr; \
- __kernel_frame0_ptr->gr17 = _interp_map_addr; \
- __kernel_frame0_ptr->gr18 = _dynamic_addr; \
- __kernel_frame0_ptr->gr19 = 0; \
- __kernel_frame0_ptr->gr20 = 0; \
- __kernel_frame0_ptr->gr21 = 0; \
- __kernel_frame0_ptr->gr22 = 0; \
- __kernel_frame0_ptr->gr23 = 0; \
- __kernel_frame0_ptr->gr24 = 0; \
- __kernel_frame0_ptr->gr25 = 0; \
- __kernel_frame0_ptr->gr26 = 0; \
- __kernel_frame0_ptr->gr27 = 0; \
- __kernel_frame0_ptr->gr29 = 0; \
-} while(0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC
-#define ELF_EXEC_PAGESIZE 16384
-
-/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
- use of this is to invoke "./ld.so someprog" to test out a new version of
- the loader. We need to make sure that it is out of the way of the program
- that it will "exec", and that there is sufficient room for the brk. */
-
-#define ELF_ET_DYN_BASE 0x08000000UL
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this cpu supports. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-#endif
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef _ASM_ERRNO_H
-#define _ASM_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _ASM_ERRNO_H */
-
+++ /dev/null
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+++ /dev/null
-#include <asm-generic/fcntl.h>
+++ /dev/null
-#ifndef __ASM_FPU_H
-#define __ASM_FPU_H
-
-
-/*
- * MAX floating point unit state size (FSAVE/FRESTORE)
- */
-
-#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0)
-
-#endif /* __ASM_FPU_H */
+++ /dev/null
-/* empty */
+++ /dev/null
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#ifdef __KERNEL__
-
-#include <linux/futex.h>
-#include <asm/errno.h>
-#include <asm/uaccess.h>
-
-extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr);
-
-static inline int
-futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
-{
- return -ENOSYS;
-}
-
-#endif
-#endif
+++ /dev/null
-/* gdb-stub.h: FRV GDB stub
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef __ASM_GDB_STUB_H
-#define __ASM_GDB_STUB_H
-
-#undef GDBSTUB_DEBUG_PROTOCOL
-
-#include <asm/ptrace.h>
-
-/*
- * important register numbers in GDB protocol
- * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7,
- * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15,
- * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23,
- * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31,
- * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39,
- * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47,
- * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55,
- * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63,
- * - FR0, FR1, FR2, FR3, FR4, FR5, FR6, FR7,
- * - FR8, FR9, FR10, FR11, FR12, FR13, FR14, FR15,
- * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23,
- * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31,
- * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39,
- * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47,
- * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55,
- * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63,
- * - PC, PSR, CCR, CCCR,
- * - _X132, _X133, _X134
- * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3,
- * - SCR0, SCR1, SCR2, SCR3,
- * - LR, LCR,
- * - IACC0H, IACC0L,
- * - FSR0,
- * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7,
- * - ACCG0123, ACCG4567,
- * - MSR0, MSR1,
- * - GNER0, GNER1,
- * - FNER0, FNER1,
- */
-#define GDB_REG_GR(N) (N)
-#define GDB_REG_FR(N) (64+(N))
-#define GDB_REG_PC 128
-#define GDB_REG_PSR 129
-#define GDB_REG_CCR 130
-#define GDB_REG_CCCR 131
-#define GDB_REG_TBR 135
-#define GDB_REG_BRR 136
-#define GDB_REG_DBAR(N) (137+(N))
-#define GDB_REG_SCR(N) (141+(N))
-#define GDB_REG_LR 145
-#define GDB_REG_LCR 146
-#define GDB_REG_FSR0 149
-#define GDB_REG_ACC(N) (150+(N))
-#define GDB_REG_ACCG(N) (158+(N)/4)
-#define GDB_REG_MSR(N) (160+(N))
-#define GDB_REG_GNER(N) (162+(N))
-#define GDB_REG_FNER(N) (164+(N))
-
-#define GDB_REG_SP GDB_REG_GR(1)
-#define GDB_REG_FP GDB_REG_GR(2)
-
-#ifndef _LANGUAGE_ASSEMBLY
-
-/*
- * Prototypes
- */
-extern void show_registers_only(struct pt_regs *regs);
-
-extern void gdbstub_init(void);
-extern void gdbstub(int type);
-extern void gdbstub_exit(int status);
-
-extern void gdbstub_io_init(void);
-extern void gdbstub_set_baud(unsigned baud);
-extern int gdbstub_rx_char(unsigned char *_ch, int nonblock);
-extern void gdbstub_tx_char(unsigned char ch);
-extern void gdbstub_tx_flush(void);
-extern void gdbstub_do_rx(void);
-
-extern asmlinkage void __debug_stub_init_break(void);
-extern asmlinkage void __break_hijack_kernel_event(void);
-extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
-extern asmlinkage void start_kernel(void);
-
-extern asmlinkage void gdbstub_rx_handler(void);
-extern asmlinkage void gdbstub_rx_irq(void);
-extern asmlinkage void gdbstub_intercept(void);
-
-extern uint32_t __entry_usertrap_table[];
-extern uint32_t __entry_kerneltrap_table[];
-
-extern volatile u8 gdbstub_rx_buffer[PAGE_SIZE];
-extern volatile u32 gdbstub_rx_inp;
-extern volatile u32 gdbstub_rx_outp;
-extern volatile u8 gdbstub_rx_overflow;
-extern u8 gdbstub_rx_unget;
-
-extern void gdbstub_printk(const char *fmt, ...);
-extern void debug_to_serial(const char *p, int n);
-extern void console_set_baud(unsigned baud);
-
-#ifdef GDBSTUB_DEBUG_PROTOCOL
-#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__)
-#else
-#define gdbstub_proto(FMT,...) ({ 0; })
-#endif
-
-/*
- * we dedicate GR31 to keeping a pointer to the gdbstub exception frame
- * - gr31 is destroyed on entry to the gdbstub if !MMU
- * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU
- */
-register struct frv_frame0 *__debug_frame0 asm("gr31");
-
-#define __debug_frame (&__debug_frame0->regs)
-#define __debug_user_context (&__debug_frame0->uc)
-#define __debug_regs (&__debug_frame0->debug)
-#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X)))
-
-struct frv_debug_status {
- unsigned long bpsr;
- unsigned long dcr;
- unsigned long brr;
- unsigned long nmar;
-};
-
-extern struct frv_debug_status __debug_status;
-
-#endif /* _LANGUAGE_ASSEMBLY */
-#endif /* __ASM_GDB_STUB_H */
+++ /dev/null
-/* gpio-regs.h: on-chip general purpose I/O registers
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_GPIO_REGS
-#define _ASM_GPIO_REGS
-
-#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
-
-#define __get_PDR() ({ __reg(0xfeff0400); })
-#define __set_PDR(V) do { __reg(0xfeff0400) = (V); mb(); } while(0)
-
-#define __get_GPDR() ({ __reg(0xfeff0408); })
-#define __set_GPDR(V) do { __reg(0xfeff0408) = (V); mb(); } while(0)
-
-#define __get_SIR() ({ __reg(0xfeff0410); })
-#define __set_SIR(V) do { __reg(0xfeff0410) = (V); mb(); } while(0)
-
-#define __get_SOR() ({ __reg(0xfeff0418); })
-#define __set_SOR(V) do { __reg(0xfeff0418) = (V); mb(); } while(0)
-
-#define __set_PDSR(V) do { __reg(0xfeff0420) = (V); mb(); } while(0)
-
-#define __set_PDCR(V) do { __reg(0xfeff0428) = (V); mb(); } while(0)
-
-#define __get_RSTR() ({ __reg(0xfeff0500); })
-#define __set_RSTR(V) do { __reg(0xfeff0500) = (V); mb(); } while(0)
-
-
-
-/* PDR definitions */
-#define PDR_GPIO_DATA(X) (1 << (X))
-
-/* GPDR definitions */
-#define GPDR_INPUT 0
-#define GPDR_OUTPUT 1
-#define GPDR_DREQ0_BIT 0x00001000
-#define GPDR_DREQ1_BIT 0x00008000
-#define GPDR_DREQ2_BIT 0x00040000
-#define GPDR_DREQ3_BIT 0x00080000
-#define GPDR_DREQ4_BIT 0x00004000
-#define GPDR_DREQ5_BIT 0x00020000
-#define GPDR_DREQ6_BIT 0x00100000
-#define GPDR_DREQ7_BIT 0x00200000
-#define GPDR_DACK0_BIT 0x00002000
-#define GPDR_DACK1_BIT 0x00010000
-#define GPDR_DACK2_BIT 0x00100000
-#define GPDR_DACK3_BIT 0x00200000
-#define GPDR_DONE0_BIT 0x00004000
-#define GPDR_DONE1_BIT 0x00020000
-#define GPDR_GPIO_DIR(X,D) ((D) << (X))
-
-/* SIR definitions */
-#define SIR_GPIO_INPUT 0
-#define SIR_DREQ7_INPUT 0x00200000
-#define SIR_DREQ6_INPUT 0x00100000
-#define SIR_DREQ3_INPUT 0x00080000
-#define SIR_DREQ2_INPUT 0x00040000
-#define SIR_DREQ5_INPUT 0x00020000
-#define SIR_DREQ1_INPUT 0x00008000
-#define SIR_DREQ4_INPUT 0x00004000
-#define SIR_DREQ0_INPUT 0x00001000
-#define SIR_RXD1_INPUT 0x00000400
-#define SIR_CTS0_INPUT 0x00000100
-#define SIR_RXD0_INPUT 0x00000040
-#define SIR_GATE1_INPUT 0x00000020
-#define SIR_GATE0_INPUT 0x00000010
-#define SIR_IRQ3_INPUT 0x00000008
-#define SIR_IRQ2_INPUT 0x00000004
-#define SIR_IRQ1_INPUT 0x00000002
-#define SIR_IRQ0_INPUT 0x00000001
-#define SIR_DREQ_BITS (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \
- SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \
- SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \
- SIR_DREQ6_INPUT | SIR_DREQ7_INPUT)
-
-/* SOR definitions */
-#define SOR_GPIO_OUTPUT 0
-#define SOR_DACK3_OUTPUT 0x00200000
-#define SOR_DACK2_OUTPUT 0x00100000
-#define SOR_DONE1_OUTPUT 0x00020000
-#define SOR_DACK1_OUTPUT 0x00010000
-#define SOR_DONE0_OUTPUT 0x00004000
-#define SOR_DACK0_OUTPUT 0x00002000
-#define SOR_TXD1_OUTPUT 0x00000800
-#define SOR_RTS0_OUTPUT 0x00000200
-#define SOR_TXD0_OUTPUT 0x00000080
-#define SOR_TOUT1_OUTPUT 0x00000020
-#define SOR_TOUT0_OUTPUT 0x00000010
-#define SOR_DONE_BITS (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT)
-#define SOR_DACK_BITS (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \
- SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT)
-
-/* PDSR definitions */
-#define PDSR_UNCHANGED 0
-#define PDSR_SET_BIT(X) (1 << (X))
-
-/* PDCR definitions */
-#define PDCR_UNCHANGED 0
-#define PDCR_CLEAR_BIT(X) (1 << (X))
-
-/* RSTR definitions */
-/* Read Only */
-#define RSTR_POWERON 0x00000400
-#define RSTR_SOFTRESET_STATUS 0x00000100
-/* Write Only */
-#define RSTR_SOFTRESET 0x00000001
-
-#endif /* _ASM_GPIO_REGS */
+++ /dev/null
-/* hardirq.h: FRV hardware IRQ management
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
- unsigned int __softirq_pending;
- unsigned long idle_timestamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#ifdef CONFIG_SMP
-#error SMP not available on FR-V
-#endif /* CONFIG_SMP */
-
-extern atomic_t irq_err_count;
-static inline void ack_bad_irq(int irq)
-{
- atomic_inc(&irq_err_count);
-}
-
-#endif
+++ /dev/null
-/* highmem.h: virtual kernel memory mappings for high memory
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-i386/highmem.h
- *
- * See Documentation/frv/mmu-layout.txt for more information.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <asm/mem-layout.h>
-#include <asm/spr-regs.h>
-#include <asm/mb-regs.h>
-
-#define NR_TLB_LINES 64 /* number of lines in the TLB */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/interrupt.h>
-#include <asm/kmap_types.h>
-#include <asm/pgtable.h>
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-#define HIGHMEM_DEBUG 1
-#else
-#define HIGHMEM_DEBUG 0
-#endif
-
-/* declarations for highmem.c */
-extern unsigned long highstart_pfn, highend_pfn;
-
-#define kmap_prot PAGE_KERNEL
-#define kmap_pte ______kmap_pte_in_TLB
-extern pte_t *pkmap_page_table;
-
-#define flush_cache_kmaps() do { } while (0)
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define LAST_PKMAP PTRS_PER_PTE
-#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
-#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-extern void *kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-extern void *kmap(struct page *page);
-extern void kunmap(struct page *page);
-
-extern struct page *kmap_atomic_to_page(void *ptr);
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-#define KMAP_ATOMIC_CACHE_DAMR 8
-
-#ifndef __ASSEMBLY__
-
-#define __kmap_atomic_primary(type, paddr, ampr) \
-({ \
- unsigned long damlr, dampr; \
- \
- dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
- \
- if (type != __KM_CACHE) \
- asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory"); \
- else \
- asm volatile("movgs %0,iampr"#ampr"\n" \
- "movgs %0,dampr"#ampr"\n" \
- :: "r"(dampr) : "memory" \
- ); \
- \
- asm("movsg damlr"#ampr",%0" : "=r"(damlr)); \
- \
- /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/ \
- \
- (void *) damlr; \
-})
-
-#define __kmap_atomic_secondary(slot, paddr) \
-({ \
- unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE; \
- unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \
- \
- asm volatile("movgs %0,tplr \n" \
- "movgs %1,tppr \n" \
- "tlbpr %0,gr0,#2,#1" \
- : : "r"(damlr), "r"(dampr) : "memory"); \
- \
- /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/ \
- \
- (void *) damlr; \
-})
-
-static inline void *kmap_atomic(struct page *page, enum km_type type)
-{
- unsigned long paddr;
-
- pagefault_disable();
- debug_kmap_atomic(type);
- paddr = page_to_phys(page);
-
- switch (type) {
- case 0: return __kmap_atomic_primary(0, paddr, 2);
- case 1: return __kmap_atomic_primary(1, paddr, 3);
- case 2: return __kmap_atomic_primary(2, paddr, 4);
- case 3: return __kmap_atomic_primary(3, paddr, 5);
- case 4: return __kmap_atomic_primary(4, paddr, 6);
- case 5: return __kmap_atomic_primary(5, paddr, 7);
- case 6: return __kmap_atomic_primary(6, paddr, 8);
- case 7: return __kmap_atomic_primary(7, paddr, 9);
- case 8: return __kmap_atomic_primary(8, paddr, 10);
-
- case 9 ... 9 + NR_TLB_LINES - 1:
- return __kmap_atomic_secondary(type - 9, paddr);
-
- default:
- BUG();
- return NULL;
- }
-}
-
-#define __kunmap_atomic_primary(type, ampr) \
-do { \
- asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory"); \
- if (type == __KM_CACHE) \
- asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory"); \
-} while(0)
-
-#define __kunmap_atomic_secondary(slot, vaddr) \
-do { \
- asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory"); \
-} while(0)
-
-static inline void kunmap_atomic(void *kvaddr, enum km_type type)
-{
- switch (type) {
- case 0: __kunmap_atomic_primary(0, 2); break;
- case 1: __kunmap_atomic_primary(1, 3); break;
- case 2: __kunmap_atomic_primary(2, 4); break;
- case 3: __kunmap_atomic_primary(3, 5); break;
- case 4: __kunmap_atomic_primary(4, 6); break;
- case 5: __kunmap_atomic_primary(5, 7); break;
- case 6: __kunmap_atomic_primary(6, 8); break;
- case 7: __kunmap_atomic_primary(7, 9); break;
- case 8: __kunmap_atomic_primary(8, 10); break;
-
- case 9 ... 9 + NR_TLB_LINES - 1:
- __kunmap_atomic_secondary(type - 9, kvaddr);
- break;
-
- default:
- BUG();
- }
- pagefault_enable();
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
+++ /dev/null
-/* hw_irq.h: FR-V specific h/w IRQ stuff
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
-
-
-#endif /* _ASM_HW_IRQ_H */
+++ /dev/null
-#ifndef _ASM_INIT_H
-#define _ASM_INIT_H
-
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
-/* For assembly routines */
-#define __INIT .section ".text.init",#alloc,#execinstr
-#define __FINIT .previous
-#define __INITDATA .section ".data.init",#alloc,#write
-
-#endif
-
+++ /dev/null
-/* io.h: FRV I/O operations
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * This gets interesting when talking to the PCI bus - the CPU is in big endian
- * mode, the PCI bus is little endian and the hardware in the middle can do
- * byte swapping
- */
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <asm/virtconvert.h>
-#include <asm/string.h>
-#include <asm/mb-regs.h>
-#include <linux/delay.h>
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-
-static inline unsigned short _swapw(unsigned short v)
-{
- return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned long _swapl(unsigned long v)
-{
- return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-//#define __iormb() asm volatile("membar")
-//#define __iowmb() asm volatile("membar")
-
-#define __raw_readb __builtin_read8
-#define __raw_readw __builtin_read16
-#define __raw_readl __builtin_read32
-
-#define __raw_writeb(datum, addr) __builtin_write8(addr, datum)
-#define __raw_writew(datum, addr) __builtin_write16(addr, datum)
-#define __raw_writel(datum, addr) __builtin_write32(addr, datum)
-
-static inline void io_outsb(unsigned int addr, const void *buf, int len)
-{
- unsigned long __ioaddr = (unsigned long) addr;
- const uint8_t *bp = buf;
-
- while (len--)
- __builtin_write8((volatile void __iomem *) __ioaddr, *bp++);
-}
-
-static inline void io_outsw(unsigned int addr, const void *buf, int len)
-{
- unsigned long __ioaddr = (unsigned long) addr;
- const uint16_t *bp = buf;
-
- while (len--)
- __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++));
-}
-
-extern void __outsl_ns(unsigned int addr, const void *buf, int len);
-extern void __outsl_sw(unsigned int addr, const void *buf, int len);
-static inline void __outsl(unsigned int addr, const void *buf, int len, int swap)
-{
- unsigned long __ioaddr = (unsigned long) addr;
-
- if (!swap)
- __outsl_ns(__ioaddr, buf, len);
- else
- __outsl_sw(__ioaddr, buf, len);
-}
-
-static inline void io_insb(unsigned long addr, void *buf, int len)
-{
- uint8_t *bp = buf;
-
- while (len--)
- *bp++ = __builtin_read8((volatile void __iomem *) addr);
-}
-
-static inline void io_insw(unsigned long addr, void *buf, int len)
-{
- uint16_t *bp = buf;
-
- while (len--)
- *bp++ = __builtin_read16((volatile void __iomem *) addr);
-}
-
-extern void __insl_ns(unsigned long addr, void *buf, int len);
-extern void __insl_sw(unsigned long addr, void *buf, int len);
-static inline void __insl(unsigned long addr, void *buf, int len, int swap)
-{
- if (!swap)
- __insl_ns(addr, buf, len);
- else
- __insl_sw(addr, buf, len);
-}
-
-#define mmiowb() mb()
-
-/*
- * make the short names macros so specific devices
- * can override them as required
- */
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
- memset((void __force *) addr, val, count);
-}
-
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
- memcpy(dst, (void __force *) src, count);
-}
-
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
- memcpy((void __force *) dst, src, count);
-}
-
-static inline uint8_t inb(unsigned long addr)
-{
- return __builtin_read8((void __iomem *)addr);
-}
-
-static inline uint16_t inw(unsigned long addr)
-{
- uint16_t ret = __builtin_read16((void __iomem *)addr);
-
- if (__is_PCI_IO(addr))
- ret = _swapw(ret);
-
- return ret;
-}
-
-static inline uint32_t inl(unsigned long addr)
-{
- uint32_t ret = __builtin_read32((void __iomem *)addr);
-
- if (__is_PCI_IO(addr))
- ret = _swapl(ret);
-
- return ret;
-}
-
-static inline void outb(uint8_t datum, unsigned long addr)
-{
- __builtin_write8((void __iomem *)addr, datum);
-}
-
-static inline void outw(uint16_t datum, unsigned long addr)
-{
- if (__is_PCI_IO(addr))
- datum = _swapw(datum);
- __builtin_write16((void __iomem *)addr, datum);
-}
-
-static inline void outl(uint32_t datum, unsigned long addr)
-{
- if (__is_PCI_IO(addr))
- datum = _swapl(datum);
- __builtin_write32((void __iomem *)addr, datum);
-}
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) __outsl(a,b,l,0)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) __insl(a,b,l,0)
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline uint8_t readb(const volatile void __iomem *addr)
-{
- return __builtin_read8((__force void volatile __iomem *) addr);
-}
-
-static inline uint16_t readw(const volatile void __iomem *addr)
-{
- uint16_t ret = __builtin_read16((__force void volatile __iomem *)addr);
-
- if (__is_PCI_MEM(addr))
- ret = _swapw(ret);
- return ret;
-}
-
-static inline uint32_t readl(const volatile void __iomem *addr)
-{
- uint32_t ret = __builtin_read32((__force void volatile __iomem *)addr);
-
- if (__is_PCI_MEM(addr))
- ret = _swapl(ret);
-
- return ret;
-}
-
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-static inline void writeb(uint8_t datum, volatile void __iomem *addr)
-{
- __builtin_write8(addr, datum);
- if (__is_PCI_MEM(addr))
- __flush_PCI_writes();
-}
-
-static inline void writew(uint16_t datum, volatile void __iomem *addr)
-{
- if (__is_PCI_MEM(addr))
- datum = _swapw(datum);
-
- __builtin_write16(addr, datum);
- if (__is_PCI_MEM(addr))
- __flush_PCI_writes();
-}
-
-static inline void writel(uint32_t datum, volatile void __iomem *addr)
-{
- if (__is_PCI_MEM(addr))
- datum = _swapl(datum);
-
- __builtin_write32(addr, datum);
- if (__is_PCI_MEM(addr))
- __flush_PCI_writes();
-}
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING 0
-#define IOMAP_NOCACHE_SER 1
-#define IOMAP_NOCACHE_NONSER 2
-#define IOMAP_WRITETHROUGH 3
-
-extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
-
-static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-
-static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-
-static inline void __iomem *ioremap_writethrough(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-
-static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
- return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-#define ioremap_wc ioremap_nocache
-
-extern void iounmap(void volatile __iomem *addr);
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- return (void __iomem *) port;
-}
-
-static inline void ioport_unmap(void __iomem *p)
-{
-}
-
-static inline void flush_write_buffers(void)
-{
- __asm__ __volatile__ ("membar" : : :"memory");
-}
-
-/*
- * do appropriate I/O accesses for token type
- */
-static inline unsigned int ioread8(void __iomem *p)
-{
- return __builtin_read8(p);
-}
-
-static inline unsigned int ioread16(void __iomem *p)
-{
- uint16_t ret = __builtin_read16(p);
- if (__is_PCI_addr(p))
- ret = _swapw(ret);
- return ret;
-}
-
-static inline unsigned int ioread32(void __iomem *p)
-{
- uint32_t ret = __builtin_read32(p);
- if (__is_PCI_addr(p))
- ret = _swapl(ret);
- return ret;
-}
-
-static inline void iowrite8(u8 val, void __iomem *p)
-{
- __builtin_write8(p, val);
- if (__is_PCI_MEM(p))
- __flush_PCI_writes();
-}
-
-static inline void iowrite16(u16 val, void __iomem *p)
-{
- if (__is_PCI_addr(p))
- val = _swapw(val);
- __builtin_write16(p, val);
- if (__is_PCI_MEM(p))
- __flush_PCI_writes();
-}
-
-static inline void iowrite32(u32 val, void __iomem *p)
-{
- if (__is_PCI_addr(p))
- val = _swapl(val);
- __builtin_write32(p, val);
- if (__is_PCI_MEM(p))
- __flush_PCI_writes();
-}
-
-static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count)
-{
- io_insb((unsigned long) p, dst, count);
-}
-
-static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count)
-{
- io_insw((unsigned long) p, dst, count);
-}
-
-static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count)
-{
- __insl_ns((unsigned long) p, dst, count);
-}
-
-static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count)
-{
- io_outsb((unsigned long) p, src, count);
-}
-
-static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count)
-{
- io_outsw((unsigned long) p, src, count);
-}
-
-static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count)
-{
- __outsl_ns((unsigned long) p, src, count);
-}
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
-{
-}
-
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IO_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#ifndef __ASM_IOCTLS_H__
-#define __ASM_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* __ASM_IOCTLS_H__ */
-
+++ /dev/null
-#ifndef __ASM_IPCBUF_H__
-#define __ASM_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for FR-V architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __ASM_IPCBUF_H__ */
-
+++ /dev/null
-/* irc-regs.h: on-chip interrupt controller registers
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_IRC_REGS
-#define _ASM_IRC_REGS
-
-#define __reg(ADDR) (*(volatile unsigned long *)(ADDR))
-
-#define __get_TM0() ({ __reg(0xfeff9800); })
-#define __get_TM1() ({ __reg(0xfeff9808); })
-#define __set_TM1(V) do { __reg(0xfeff9808) = (V); mb(); } while(0)
-
-#define __set_TM1x(XI,V) \
-do { \
- int shift = (XI) * 2 + 16; \
- unsigned long tm1 = __reg(0xfeff9808); \
- tm1 &= ~(0x3 << shift); \
- tm1 |= (V) << shift; \
- __reg(0xfeff9808) = tm1; \
- mb(); \
-} while(0)
-
-#define __get_RS(C) ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; })
-
-#define __clr_RC(C) do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0)
-
-#define __get_MASK(C) ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; })
-#define __set_MASK(C) do { __reg(0xfeff9820) |= 1 << ((C)+16); mb(); } while(0)
-#define __clr_MASK(C) do { __reg(0xfeff9820) &= ~(1 << ((C)+16)); mb(); } while(0)
-
-#define __get_MASK_all() __get_MASK(0)
-#define __set_MASK_all() __set_MASK(0)
-#define __clr_MASK_all() __clr_MASK(0)
-
-#define __get_IRL() ({ (__reg(0xfeff9828) >> 16) & 0xf; })
-#define __clr_IRL() do { __reg(0xfeff9828) = 0x100000; mb(); } while(0)
-
-#define __get_IRR(N) ({ __reg(0xfeff9840 + (N) * 8); })
-#define __set_IRR(N,V) do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0)
-
-#define __get_IITMR(N) ({ __reg(0xfeff9880 + (N) * 8); })
-#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0)
-
-
-#endif /* _ASM_IRC_REGS */
+++ /dev/null
-/* irq.h: FRV IRQ definitions
- *
- * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_IRQ_H_
-#define _ASM_IRQ_H_
-
-#define NR_IRQS 48
-#define IRQ_BASE_CPU (0 * 16)
-#define IRQ_BASE_FPGA (1 * 16)
-#define IRQ_BASE_MB93493 (2 * 16)
-
-/* probe returns a 32-bit IRQ mask:-/ */
-#define MIN_PROBE_IRQ (NR_IRQS - 32)
-
-#ifndef __ASSEMBLY__
-static inline int irq_canonicalize(int irq)
-{
- return irq;
-}
-#endif
-
-#endif /* _ASM_IRQ_H_ */
+++ /dev/null
-/* FRV per-CPU frame pointer holder
- *
- * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_IRQ_REGS_H
-#define _ASM_IRQ_REGS_H
-
-/*
- * Per-cpu current frame pointer - the location of the last exception frame on
- * the stack
- * - on FRV, GR28 is dedicated to keeping a pointer to the current exception
- * frame
- */
-#define ARCH_HAS_OWN_IRQ_REGS
-
-#ifndef __ASSEMBLY__
-#define get_irq_regs() (__frame)
-#endif
-
-#endif /* _ASM_IRQ_REGS_H */
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-enum km_type {
- /* arch specific kmaps - change the numbers attached to these at your peril */
- __KM_CACHE, /* cache flush page attachment point */
- __KM_PGD, /* current page directory */
- __KM_ITLB_PTD, /* current instruction TLB miss page table lookup */
- __KM_DTLB_PTD, /* current data TLB miss page table lookup */
-
- /* general kmaps */
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
-
-#endif
+++ /dev/null
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .align 4
-#define __ALIGN_STR ".align 4"
-
-#endif
+++ /dev/null
-#ifndef _ASM_LOCAL_H
-#define _ASM_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* _ASM_LOCAL_H */
+++ /dev/null
-#ifndef _ASM_MATH_EMU_H
-#define _ASM_MATH_EMU_H
-
-#include <asm/setup.h>
-#include <linux/linkage.h>
-
-/* Status Register bits */
-
-/* accrued exception bits */
-#define FPSR_AEXC_INEX 3
-#define FPSR_AEXC_DZ 4
-#define FPSR_AEXC_UNFL 5
-#define FPSR_AEXC_OVFL 6
-#define FPSR_AEXC_IOP 7
-
-/* exception status bits */
-#define FPSR_EXC_INEX1 8
-#define FPSR_EXC_INEX2 9
-#define FPSR_EXC_DZ 10
-#define FPSR_EXC_UNFL 11
-#define FPSR_EXC_OVFL 12
-#define FPSR_EXC_OPERR 13
-#define FPSR_EXC_SNAN 14
-#define FPSR_EXC_BSUN 15
-
-/* quotient byte, assumes big-endian, of course */
-#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
-
-/* condition code bits */
-#define FPSR_CC_NAN 24
-#define FPSR_CC_INF 25
-#define FPSR_CC_Z 26
-#define FPSR_CC_NEG 27
-
-
-/* Control register bits */
-
-/* rounding mode */
-#define FPCR_ROUND_RN 0 /* round to nearest/even */
-#define FPCR_ROUND_RZ 1 /* round to zero */
-#define FPCR_ROUND_RM 2 /* minus infinity */
-#define FPCR_ROUND_RP 3 /* plus infinity */
-
-/* rounding precision */
-#define FPCR_PRECISION_X 0 /* long double */
-#define FPCR_PRECISION_S 1 /* double */
-#define FPCR_PRECISION_D 2 /* float */
-
-
-/* Flags to select the debugging output */
-#define PDECODE 0
-#define PEXECUTE 1
-#define PCONV 2
-#define PNORM 3
-#define PREGISTER 4
-#define PINSTR 5
-#define PUNIMPL 6
-#define PMOVEM 7
-
-#define PMDECODE (1<<PDECODE)
-#define PMEXECUTE (1<<PEXECUTE)
-#define PMCONV (1<<PCONV)
-#define PMNORM (1<<PNORM)
-#define PMREGISTER (1<<PREGISTER)
-#define PMINSTR (1<<PINSTR)
-#define PMUNIMPL (1<<PUNIMPL)
-#define PMMOVEM (1<<PMOVEM)
-
-#ifndef __ASSEMBLY__
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-union fp_mant64 {
- unsigned long long m64;
- unsigned long m32[2];
-};
-
-union fp_mant128 {
- unsigned long long m64[2];
- unsigned long m32[4];
-};
-
-/* internal representation of extended fp numbers */
-struct fp_ext {
- unsigned char lowmant;
- unsigned char sign;
- unsigned short exp;
- union fp_mant64 mant;
-};
-
-/* C representation of FPU registers */
-/* NOTE: if you change this, you have to change the assembler offsets
- below and the size in <asm/fpu.h>, too */
-struct fp_data {
- struct fp_ext fpreg[8];
- unsigned int fpcr;
- unsigned int fpsr;
- unsigned int fpiar;
- unsigned short prec;
- unsigned short rnd;
- struct fp_ext temp[2];
-};
-
-#if FPU_EMU_DEBUG
-extern unsigned int fp_debugprint;
-
-#define dprint(bit, fmt, args...) ({ \
- if (fp_debugprint & (1 << (bit))) \
- printk(fmt, ## args); \
-})
-#else
-#define dprint(bit, fmt, args...)
-#endif
-
-#define uprint(str) ({ \
- static int __count = 3; \
- \
- if (__count > 0) { \
- printk("You just hit an unimplemented " \
- "fpu instruction (%s)\n", str); \
- printk("Please report this to ....\n"); \
- __count--; \
- } \
-})
-
-#define FPDATA ((struct fp_data *)current->thread.fp)
-
-#else /* __ASSEMBLY__ */
-
-#define FPDATA %a2
-
-/* offsets from the base register to the floating point data in the task struct */
-#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0)
-#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96)
-#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100)
-#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104)
-#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108)
-#define FPD_RND (TASK_THREAD+THREAD_FPREG+110)
-#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112)
-#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124)
-#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136)
-
-/* offsets on the stack to access saved registers,
- * these are only used during instruction decoding
- * where we always know how deep we're on the stack.
- */
-#define FPS_DO (PT_D0)
-#define FPS_D1 (PT_D1)
-#define FPS_D2 (PT_D2)
-#define FPS_A0 (PT_A0)
-#define FPS_A1 (PT_A1)
-#define FPS_A2 (PT_A2)
-#define FPS_SR (PT_SR)
-#define FPS_PC (PT_PC)
-#define FPS_EA (PT_PC+6)
-#define FPS_PC2 (PT_PC+10)
-
-.macro fp_get_fp_reg
- lea (FPD_FPREG,FPDATA,%d0.w*4),%a0
- lea (%a0,%d0.w*8),%a0
-.endm
-
-/* Macros used to get/put the current program counter.
- * 020/030 use a different stack frame then 040/060, for the
- * 040/060 the return pc points already to the next location,
- * so this only needs to be modified for jump instructions.
- */
-.macro fp_get_pc dest
- move.l (FPS_PC+4,%sp),\dest
-.endm
-
-.macro fp_put_pc src,jump=0
- move.l \src,(FPS_PC+4,%sp)
-.endm
-
-.macro fp_get_instr_data f,s,dest,label
- getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
- addq.l #\s,%sp@(FPS_PC+4)
-.endm
-
-.macro fp_get_instr_word dest,label,addr
- fp_get_instr_data w,2,\dest,\label,\addr
-.endm
-
-.macro fp_get_instr_long dest,label,addr
- fp_get_instr_data l,4,\dest,\label,\addr
-.endm
-
-/* These macros are used to read from/write to user space
- * on error we jump to the fixup section, load the fault
- * address into %a0 and jump to the exit.
- * (derived from <asm/uaccess.h>)
- */
-.macro getuser size,src,dest,label,addr
-| printf ,"[\size<%08x]",1,\addr
-.Lu1\@: moves\size \src,\dest
-
- .section .fixup,"ax"
- .even
-.Lu2\@: move.l \addr,%a0
- jra \label
- .previous
-
- .section __ex_table,"a"
- .align 4
- .long .Lu1\@,.Lu2\@
- .previous
-.endm
-
-.macro putuser size,src,dest,label,addr
-| printf ,"[\size>%08x]",1,\addr
-.Lu1\@: moves\size \src,\dest
-.Lu2\@:
-
- .section .fixup,"ax"
- .even
-.Lu3\@: move.l \addr,%a0
- jra \label
- .previous
-
- .section __ex_table,"a"
- .align 4
- .long .Lu1\@,.Lu3\@
- .long .Lu2\@,.Lu3\@
- .previous
-.endm
-
-
-.macro movestack nr,arg1,arg2,arg3,arg4,arg5
- .if \nr
- movestack (\nr-1),\arg2,\arg3,\arg4,\arg5
- move.l \arg1,-(%sp)
- .endif
-.endm
-
-.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
-#ifdef FPU_EMU_DEBUG
- .data
-.Lpdata\@:
- .string "\string"
- .previous
-
- movem.l %d0/%d1/%a0/%a1,-(%sp)
- .if \bit+1
-#if 0
- moveq #\bit,%d0
- andw #7,%d0
- btst %d0,fp_debugprint+((31-\bit)/8)
-#else
- btst #\bit,fp_debugprint+((31-\bit)/8)
-#endif
- jeq .Lpskip\@
- .endif
- movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5
- pea .Lpdata\@
- jsr printk
- lea ((\nr+1)*4,%sp),%sp
-.Lpskip\@:
- movem.l (%sp)+,%d0/%d1/%a0/%a1
-#endif
-.endm
-
-.macro printx bit,fp
-#ifdef FPU_EMU_DEBUG
- movem.l %d0/%a0,-(%sp)
- lea \fp,%a0
-#if 0
- moveq #'+',%d0
- tst.w (%a0)
- jeq .Lx1\@
- moveq #'-',%d0
-.Lx1\@: printf \bit," %c",1,%d0
- move.l (4,%a0),%d0
- bclr #31,%d0
- jne .Lx2\@
- printf \bit,"0."
- jra .Lx3\@
-.Lx2\@: printf \bit,"1."
-.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8)
- move.w (2,%a0),%d0
- ext.l %d0
- printf \bit,"E%04x",1,%d0
-#else
- printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
-#endif
- movem.l (%sp)+,%d0/%a0
-#endif
-.endm
-
-.macro debug instr,args
-#ifdef FPU_EMU_DEBUG
- \instr \args
-#endif
-.endm
-
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_FRV_MATH_EMU_H */
-
+++ /dev/null
-/* mb-regs.h: motherboard registers
- *
- * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MB_REGS_H
-#define _ASM_MB_REGS_H
-
-#include <asm/cpu-irqs.h>
-#include <asm/sections.h>
-#include <asm/mem-layout.h>
-
-#ifndef __ASSEMBLY__
-/* gcc builtins, annotated */
-
-unsigned long __builtin_read8(volatile void __iomem *);
-unsigned long __builtin_read16(volatile void __iomem *);
-unsigned long __builtin_read32(volatile void __iomem *);
-void __builtin_write8(volatile void __iomem *, unsigned char);
-void __builtin_write16(volatile void __iomem *, unsigned short);
-void __builtin_write32(volatile void __iomem *, unsigned long);
-#endif
-
-#define __region_IO KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable
- * protection laid over the top for use in memory-mapped
- * I/O
- */
-
-#define __region_CS0 0xff000000 /* Boot ROMs area */
-
-#ifdef CONFIG_MB93091_VDK
-/*
- * VDK motherboard and CPU card specific stuff
- */
-
-#include <asm/mb93091-fpga-irqs.h>
-
-#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0
-#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1
-
-#define __region_CS2 0xe0000000 /* SLBUS/PCI I/O space */
-#define __region_CS2_M 0x0fffffff /* mask */
-#define __region_CS2_C 0x00000000 /* control */
-#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */
-#define __region_CS5_M 0x00ffffff
-#define __region_CS5_C 0x00010000
-#define __region_CS7 0xf1000000 /* CB70 CPU-card PCMCIA port I/O space */
-#define __region_CS7_M 0x00ffffff
-#define __region_CS7_C 0x00410701
-#define __region_CS1 0xfc000000 /* SLBUS/PCI bridge control registers */
-#define __region_CS1_M 0x000fffff
-#define __region_CS1_C 0x00000000
-#define __region_CS6 0xfc100000 /* CB70 CPU-card DM9000 LAN I/O space */
-#define __region_CS6_M 0x000fffff
-#define __region_CS6_C 0x00400707
-#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */
-#define __region_CS3_M 0x000fffff
-#define __region_CS3_C 0xc8100000
-#define __region_CS4 0xfd000000 /* CB70 CPU-card extra flash space */
-#define __region_CS4_M 0x00ffffff
-#define __region_CS4_C 0x00000f07
-
-#define __region_PCI_IO (__region_CS2 + 0x04000000UL)
-#define __region_PCI_MEM (__region_CS2 + 0x08000000UL)
-#define __flush_PCI_writes() \
-do { \
- __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0); \
-} while(0)
-
-#define __is_PCI_IO(addr) \
- (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24) < (0x04000000UL >> 24))
-
-#define __is_PCI_MEM(addr) \
- ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL)
-
-#define __is_PCI_addr(addr) \
- ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL)
-
-#define __get_CLKSW() ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; })
-#define __get_CLKIN() (__get_CLKSW() * 125U * 100000U / 24U)
-
-#ifndef __ASSEMBLY__
-extern int __nongprelbss mb93090_mb00_detected;
-#endif
-
-#define __addr_LEDS() (__region_CS2 + 0x01200004UL)
-#ifdef CONFIG_MB93090_MB00
-#define __set_LEDS(X) \
-do { \
- if (mb93090_mb00_detected) \
- __builtin_write32((void __iomem *) __addr_LEDS(), ~(X)); \
-} while (0)
-#else
-#define __set_LEDS(X)
-#endif
-
-#define __addr_LCD() (__region_CS2 + 0x01200008UL)
-#define __get_LCD(B) __builtin_read32((volatile void __iomem *) (B))
-#define __set_LCD(B,X) __builtin_write32((volatile void __iomem *) (B), (X))
-
-#define LCD_D 0x000000ff /* LCD data bus */
-#define LCD_RW 0x00000100 /* LCD R/W signal */
-#define LCD_RS 0x00000200 /* LCD Register Select */
-#define LCD_E 0x00000400 /* LCD Start Enable Signal */
-
-#define LCD_CMD_CLEAR (LCD_E|0x001)
-#define LCD_CMD_HOME (LCD_E|0x002)
-#define LCD_CMD_CURSOR_INC (LCD_E|0x004)
-#define LCD_CMD_SCROLL_INC (LCD_E|0x005)
-#define LCD_CMD_CURSOR_DEC (LCD_E|0x006)
-#define LCD_CMD_SCROLL_DEC (LCD_E|0x007)
-#define LCD_CMD_OFF (LCD_E|0x008)
-#define LCD_CMD_ON(CRSR,BLINK) (LCD_E|0x00c|(CRSR<<1)|BLINK)
-#define LCD_CMD_CURSOR_MOVE_L (LCD_E|0x010)
-#define LCD_CMD_CURSOR_MOVE_R (LCD_E|0x014)
-#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018)
-#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c)
-#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2))
-#define LCD_CMD_SET_CG_ADDR(X) (LCD_E|0x040|X)
-#define LCD_CMD_SET_DD_ADDR(X) (LCD_E|0x080|X)
-#define LCD_CMD_READ_BUSY (LCD_E|LCD_RW)
-#define LCD_DATA_WRITE(X) (LCD_E|LCD_RS|(X))
-#define LCD_DATA_READ (LCD_E|LCD_RS|LCD_RW)
-
-#else
-/*
- * PDK unit specific stuff
- */
-
-#include <asm/mb93093-fpga-irqs.h>
-
-#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0
-#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1
-
-#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */
-#define __region_CS5_M 0x00ffffff /* mask */
-#define __region_CS5_C 0x00010000 /* control */
-#define __region_CS2 0x20000000 /* FPGA registers */
-#define __region_CS2_M 0x000fffff
-#define __region_CS2_C 0x00000000
-#define __region_CS1 0xfc100000 /* LAN registers */
-#define __region_CS1_M 0x000fffff
-#define __region_CS1_C 0x00010404
-#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */
-#define __region_CS3_M 0x000fffff
-#define __region_CS3_C 0xc8000000
-#define __region_CS4 0xfd000000 /* extra ROMs area */
-#define __region_CS4_M 0x00ffffff
-#define __region_CS4_C 0x00000f07
-
-#define __region_CS6 0xfe000000 /* not used - hide behind CPU resource I/O regs */
-#define __region_CS6_M 0x000fffff
-#define __region_CS6_C 0x00000f07
-#define __region_CS7 0xfe000000 /* not used - hide behind CPU resource I/O regs */
-#define __region_CS7_M 0x000fffff
-#define __region_CS7_C 0x00000f07
-
-#define __is_PCI_IO(addr) 0 /* no PCI */
-#define __is_PCI_MEM(addr) 0
-#define __is_PCI_addr(addr) 0
-#define __region_PCI_IO 0
-#define __region_PCI_MEM 0
-#define __flush_PCI_writes() do { } while(0)
-
-#define __get_CLKSW() 0UL
-#define __get_CLKIN() 66000000UL
-
-#define __addr_LEDS() (__region_CS2 + 0x00000023UL)
-#define __set_LEDS(X) __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X))
-
-#define __addr_FPGATR() (__region_CS2 + 0x00000030UL)
-#define __set_FPGATR(X) __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X))
-#define __get_FPGATR() __builtin_read32((volatile void __iomem *) __addr_FPGATR())
-
-#define MB93093_FPGA_FPGATR_AUDIO_CLK 0x00000003
-
-#define __set_FPGATR_AUDIO_CLK(V) \
- __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V))
-
-#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF 0x0
-#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz 0x1
-#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz 0x2
-#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz 0x3
-
-#define MB93093_FPGA_SWR_PUSHSWMASK (0x1F<<26)
-#define MB93093_FPGA_SWR_PUSHSW4 (1<<29)
-
-#define __addr_FPGA_SWR ((volatile void __iomem *)(__region_CS2 + 0x28UL))
-#define __get_FPGA_PUSHSW1_5() (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK)
-
-
-#endif
-
-#endif /* _ASM_MB_REGS_H */
+++ /dev/null
-/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MB86943A_H
-#define _ASM_MB86943A_H
-
-#include <asm/mb-regs.h>
-
-#define __reg_MB86943_sl_ctl *(volatile uint32_t *) (__region_CS1 + 0x00)
-
-#define MB86943_SL_CTL_BUS_WIDTH_64 0x00000001
-#define MB86943_SL_CTL_AS_HOST 0x00000002
-#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004
-#define MB86943_SL_CTL_DRCT_SLAVE_SWAP 0x00000008
-#define MB86943_SL_CTL_PCI_CONFIG_SWAP 0x00000010
-#define MB86943_SL_CTL_ECS0_ENABLE 0x00000020
-#define MB86943_SL_CTL_ECS1_ENABLE 0x00000040
-#define MB86943_SL_CTL_ECS2_ENABLE 0x00000080
-
-#define __reg_MB86943_ecs_ctl(N) *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N)))
-#define __reg_MB86943_ecs_range(N) *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N)))
-#define __reg_MB86943_ecs_base(N) *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N)))
-
-#define __reg_MB86943_sl_pci_io_range *(volatile uint32_t *) (__region_CS1 + 0x50)
-#define __reg_MB86943_sl_pci_io_base *(volatile uint32_t *) (__region_CS1 + 0x58)
-#define __reg_MB86943_sl_pci_mem_range *(volatile uint32_t *) (__region_CS1 + 0x60)
-#define __reg_MB86943_sl_pci_mem_base *(volatile uint32_t *) (__region_CS1 + 0x68)
-#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70)
-#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78)
-
-#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014)
-#define MB86943_PCIARB_EN 0x00000001
-
-#endif /* _ASM_MB86943A_H */
+++ /dev/null
-/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MB93091_FPGA_IRQS_H
-#define _ASM_MB93091_FPGA_IRQS_H
-
-#include <asm/irq.h>
-
-#ifndef __ASSEMBLY__
-
-/* IRQ IDs presented to drivers */
-enum {
- IRQ_FPGA__UNUSED = IRQ_BASE_FPGA,
- IRQ_FPGA_SYSINT_BUS_EXPANSION_1,
- IRQ_FPGA_SL_BUS_EXPANSION_2,
- IRQ_FPGA_PCI_INTD,
- IRQ_FPGA_PCI_INTC,
- IRQ_FPGA_PCI_INTB,
- IRQ_FPGA_PCI_INTA,
- IRQ_FPGA_SL_BUS_EXPANSION_7,
- IRQ_FPGA_SYSINT_BUS_EXPANSION_8,
- IRQ_FPGA_SL_BUS_EXPANSION_9,
- IRQ_FPGA_MB86943_PCI_INTA,
- IRQ_FPGA_MB86943_SLBUS_SIDE,
- IRQ_FPGA_RTL8029_INTA,
- IRQ_FPGA_SYSINT_BUS_EXPANSION_13,
- IRQ_FPGA_SL_BUS_EXPANSION_14,
- IRQ_FPGA_NMI,
-};
-
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_MB93091_FPGA_IRQS_H */
+++ /dev/null
-/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MB93093_FPGA_IRQS_H
-#define _ASM_MB93093_FPGA_IRQS_H
-
-#include <asm/irq.h>
-
-#ifndef __ASSEMBLY__
-
-/* IRQ IDs presented to drivers */
-enum {
- IRQ_FPGA_PUSH_BUTTON_SW1_5 = IRQ_BASE_FPGA + 8,
- IRQ_FPGA_ROCKER_C_SW8 = IRQ_BASE_FPGA + 9,
- IRQ_FPGA_ROCKER_C_SW9 = IRQ_BASE_FPGA + 10,
-};
-
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_MB93093_FPGA_IRQS_H */
+++ /dev/null
-/* mb93493-irqs.h: MB93493 companion chip IRQs
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MB93493_IRQS_H
-#define _ASM_MB93493_IRQS_H
-
-#include <asm/irq.h>
-
-#ifndef __ASSEMBLY__
-
-/* IRQ IDs presented to drivers */
-enum {
- IRQ_MB93493_VDC = IRQ_BASE_MB93493 + 0,
- IRQ_MB93493_VCC = IRQ_BASE_MB93493 + 1,
- IRQ_MB93493_AUDIO_OUT = IRQ_BASE_MB93493 + 2,
- IRQ_MB93493_I2C_0 = IRQ_BASE_MB93493 + 3,
- IRQ_MB93493_I2C_1 = IRQ_BASE_MB93493 + 4,
- IRQ_MB93493_USB = IRQ_BASE_MB93493 + 5,
- IRQ_MB93493_LOCAL_BUS = IRQ_BASE_MB93493 + 7,
- IRQ_MB93493_PCMCIA = IRQ_BASE_MB93493 + 8,
- IRQ_MB93493_GPIO = IRQ_BASE_MB93493 + 9,
- IRQ_MB93493_AUDIO_IN = IRQ_BASE_MB93493 + 10,
-};
-
-/* IRQ multiplexor mappings */
-#define ROUTE_VIA_IRQ0 0 /* route IRQ by way of CPU external IRQ 0 */
-#define ROUTE_VIA_IRQ1 1 /* route IRQ by way of CPU external IRQ 1 */
-
-#define IRQ_MB93493_VDC_ROUTE ROUTE_VIA_IRQ0
-#define IRQ_MB93493_VCC_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_AUDIO_OUT_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_I2C_0_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_I2C_1_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_USB_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_LOCAL_BUS_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_PCMCIA_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_GPIO_ROUTE ROUTE_VIA_IRQ1
-#define IRQ_MB93493_AUDIO_IN_ROUTE ROUTE_VIA_IRQ1
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_MB93493_IRQS_H */
+++ /dev/null
-/* mb93493-regs.h: MB93493 companion chip registers
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MB93493_REGS_H
-#define _ASM_MB93493_REGS_H
-
-#include <asm/mb-regs.h>
-#include <asm/mb93493-irqs.h>
-
-#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X)))
-#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); })
-
-#define __set_MB93493(X,V) \
-do { \
- *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb(); \
-} while(0)
-
-#define __get_MB93493_STSR(X) __get_MB93493(0x3c0 + (X) * 4)
-#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V))
-#define MB93493_STSR_EN
-
-#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4)
-#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4)
-#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V))
-
-#define __get_MB93493_DQSR(X) __get_MB93493(0x3e0 + (X) * 4)
-#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V))
-
-#define __get_MB93493_LBSER() __get_MB93493(0x3f0)
-#define __set_MB93493_LBSER(V) __set_MB93493(0x3f0, (V))
-
-#define MB93493_LBSER_VDC 0x00010000
-#define MB93493_LBSER_VCC 0x00020000
-#define MB93493_LBSER_AUDIO 0x00040000
-#define MB93493_LBSER_I2C_0 0x00080000
-#define MB93493_LBSER_I2C_1 0x00100000
-#define MB93493_LBSER_USB 0x00200000
-#define MB93493_LBSER_GPIO 0x00800000
-#define MB93493_LBSER_PCMCIA 0x01000000
-
-#define __get_MB93493_LBSR() __get_MB93493(0x3fc)
-#define __set_MB93493_LBSR(V) __set_MB93493(0x3fc, (V))
-
-/*
- * video display controller
- */
-#define __get_MB93493_VDC(X) __get_MB93493(MB93493_VDC_##X)
-#define __set_MB93493_VDC(X,V) __set_MB93493(MB93493_VDC_##X, (V))
-
-#define MB93493_VDC_RCURSOR 0x140 /* cursor position */
-#define MB93493_VDC_RCT1 0x144 /* cursor colour 1 */
-#define MB93493_VDC_RCT2 0x148 /* cursor colour 2 */
-#define MB93493_VDC_RHDC 0x150 /* horizontal display period */
-#define MB93493_VDC_RH_MARGINS 0x154 /* horizontal margin sizes */
-#define MB93493_VDC_RVDC 0x158 /* vertical display period */
-#define MB93493_VDC_RV_MARGINS 0x15c /* vertical margin sizes */
-#define MB93493_VDC_RC 0x170 /* VDC control */
-#define MB93493_VDC_RCLOCK 0x174 /* clock divider, DMA req delay */
-#define MB93493_VDC_RBLACK 0x178 /* black insert sizes */
-#define MB93493_VDC_RS 0x17c /* VDC status */
-
-#define __addr_MB93493_VDC_BCI(X) ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); })
-#define __addr_MB93493_VDC_TPO(X) (__region_CS3 + 0x1c0 + (X))
-
-#define VDC_TPO_WIDTH 32
-
-#define VDC_RC_DSR 0x00000080 /* VDC master reset */
-
-#define VDC_RS_IT 0x00060000 /* interrupt indicators */
-#define VDC_RS_IT_UNDERFLOW 0x00040000 /* - underflow event */
-#define VDC_RS_IT_VSYNC 0x00020000 /* - VSYNC event */
-#define VDC_RS_DFI 0x00010000 /* current interlace field number */
-#define VDC_RS_DFI_TOP 0x00000000 /* - top field */
-#define VDC_RS_DFI_BOTTOM 0x00010000 /* - bottom field */
-#define VDC_RS_DCSR 0x00000010 /* cursor state */
-#define VDC_RS_DCM 0x00000003 /* display mode */
-#define VDC_RS_DCM_DISABLED 0x00000000 /* - display disabled */
-#define VDC_RS_DCM_STOPPED 0x00000001 /* - VDC stopped */
-#define VDC_RS_DCM_FREERUNNING 0x00000002 /* - VDC free-running */
-#define VDC_RS_DCM_TRANSFERRING 0x00000003 /* - data being transferred to VDC */
-
-/*
- * video capture controller
- */
-#define __get_MB93493_VCC(X) __get_MB93493(MB93493_VCC_##X)
-#define __set_MB93493_VCC(X,V) __set_MB93493(MB93493_VCC_##X, (V))
-
-#define MB93493_VCC_RREDUCT 0x104 /* reduction rate */
-#define MB93493_VCC_RHY 0x108 /* horizontal brightness filter coefficients */
-#define MB93493_VCC_RHC 0x10c /* horizontal colour-difference filter coefficients */
-#define MB93493_VCC_RHSIZE 0x110 /* horizontal cycle sizes */
-#define MB93493_VCC_RHBC 0x114 /* horizontal back porch size */
-#define MB93493_VCC_RVCC 0x118 /* vertical capture period */
-#define MB93493_VCC_RVBC 0x11c /* vertical back porch period */
-#define MB93493_VCC_RV 0x120 /* vertical filter coefficients */
-#define MB93493_VCC_RDTS 0x128 /* DMA transfer size */
-#define MB93493_VCC_RDTS_4B 0x01000000 /* 4-byte transfer */
-#define MB93493_VCC_RDTS_32B 0x03000000 /* 32-byte transfer */
-#define MB93493_VCC_RDTS_SHIFT 24
-#define MB93493_VCC_RCC 0x130 /* VCC control */
-#define MB93493_VCC_RIS 0x134 /* VCC interrupt status */
-
-#define __addr_MB93493_VCC_TPI(X) (__region_CS3 + 0x180 + (X))
-
-#define VCC_RHSIZE_RHCC 0x000007ff
-#define VCC_RHSIZE_RHCC_SHIFT 0
-#define VCC_RHSIZE_RHTCC 0x0fff0000
-#define VCC_RHSIZE_RHTCC_SHIFT 16
-
-#define VCC_RVBC_RVBC 0x00003f00
-#define VCC_RVBC_RVBC_SHIFT 8
-
-#define VCC_RREDUCT_RHR 0x07ff0000
-#define VCC_RREDUCT_RHR_SHIFT 16
-#define VCC_RREDUCT_RVR 0x000007ff
-#define VCC_RREDUCT_RVR_SHIFT 0
-
-#define VCC_RCC_CE 0x00000001 /* VCC enable */
-#define VCC_RCC_CS 0x00000002 /* request video capture start */
-#define VCC_RCC_CPF 0x0000000c /* pixel format */
-#define VCC_RCC_CPF_YCBCR_16 0x00000000 /* - YCbCr 4:2:2 16-bit format */
-#define VCC_RCC_CPF_RGB 0x00000004 /* - RGB 4:4:4 format */
-#define VCC_RCC_CPF_YCBCR_24 0x00000008 /* - YCbCr 4:2:2 24-bit format */
-#define VCC_RCC_CPF_BT656 0x0000000c /* - ITU R-BT.656 format */
-#define VCC_RCC_CPF_SHIFT 2
-#define VCC_RCC_CSR 0x00000080 /* request reset */
-#define VCC_RCC_HSIP 0x00000100 /* HSYNC polarity */
-#define VCC_RCC_HSIP_LOACT 0x00000000 /* - low active */
-#define VCC_RCC_HSIP_HIACT 0x00000100 /* - high active */
-#define VCC_RCC_VSIP 0x00000200 /* VSYNC polarity */
-#define VCC_RCC_VSIP_LOACT 0x00000000 /* - low active */
-#define VCC_RCC_VSIP_HIACT 0x00000200 /* - high active */
-#define VCC_RCC_CIE 0x00000800 /* interrupt enable */
-#define VCC_RCC_CFP 0x00001000 /* RGB pixel packing */
-#define VCC_RCC_CFP_4TO3 0x00000000 /* - pack 4 pixels into 3 words */
-#define VCC_RCC_CFP_1TO1 0x00001000 /* - pack 1 pixel into 1 words */
-#define VCC_RCC_CSM 0x00006000 /* interlace specification */
-#define VCC_RCC_CSM_ONEPASS 0x00002000 /* - non-interlaced */
-#define VCC_RCC_CSM_INTERLACE 0x00004000 /* - interlaced */
-#define VCC_RCC_CSM_SHIFT 13
-#define VCC_RCC_ES 0x00008000 /* capture start polarity */
-#define VCC_RCC_ES_NEG 0x00000000 /* - negative edge */
-#define VCC_RCC_ES_POS 0x00008000 /* - positive edge */
-#define VCC_RCC_IFI 0x00080000 /* inferlace field evaluation reverse */
-#define VCC_RCC_FDTS 0x00300000 /* interlace field start */
-#define VCC_RCC_FDTS_3_8 0x00000000 /* - 3/8 of horizontal entire cycle */
-#define VCC_RCC_FDTS_1_4 0x00100000 /* - 1/4 of horizontal entire cycle */
-#define VCC_RCC_FDTS_7_16 0x00200000 /* - 7/16 of horizontal entire cycle */
-#define VCC_RCC_FDTS_SHIFT 20
-#define VCC_RCC_MOV 0x00400000 /* test bit - always set to 1 */
-#define VCC_RCC_STP 0x00800000 /* request video capture stop */
-#define VCC_RCC_TO 0x01000000 /* input during top-field only */
-
-#define VCC_RIS_VSYNC 0x01000000 /* VSYNC interrupt */
-#define VCC_RIS_OV 0x02000000 /* overflow interrupt */
-#define VCC_RIS_BOTTOM 0x08000000 /* interlace bottom field */
-#define VCC_RIS_STARTED 0x10000000 /* capture started */
-
-/*
- * I2C
- */
-#define MB93493_I2C_BSR 0x340 /* bus status */
-#define MB93493_I2C_BCR 0x344 /* bus control */
-#define MB93493_I2C_CCR 0x348 /* clock control */
-#define MB93493_I2C_ADR 0x34c /* address */
-#define MB93493_I2C_DTR 0x350 /* data */
-#define MB93493_I2C_BC2R 0x35c /* bus control 2 */
-
-#define __addr_MB93493_I2C(port,X) (__region_CS3 + MB93493_I2C_##X + ((port)*0x20))
-#define __get_MB93493_I2C(port,X) __get_MB93493(MB93493_I2C_##X + ((port)*0x20))
-#define __set_MB93493_I2C(port,X,V) __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V))
-
-#define I2C_BSR_BB (1 << 7)
-
-/*
- * audio controller (I2S) registers
- */
-#define __get_MB93493_I2S(X) __get_MB93493(MB93493_I2S_##X)
-#define __set_MB93493_I2S(X,V) __set_MB93493(MB93493_I2S_##X, (V))
-
-#define MB93493_I2S_ALDR 0x300 /* L-channel data */
-#define MB93493_I2S_ARDR 0x304 /* R-channel data */
-#define MB93493_I2S_APDR 0x308 /* 16-bit packed data */
-#define MB93493_I2S_AISTR 0x310 /* status */
-#define MB93493_I2S_AICR 0x314 /* control */
-
-#define __addr_MB93493_I2S_ALDR(X) (__region_CS3 + MB93493_I2S_ALDR + (X))
-#define __addr_MB93493_I2S_ARDR(X) (__region_CS3 + MB93493_I2S_ARDR + (X))
-#define __addr_MB93493_I2S_APDR(X) (__region_CS3 + MB93493_I2S_APDR + (X))
-#define __addr_MB93493_I2S_ADR(X) (__region_CS3 + 0x320 + (X))
-
-#define I2S_AISTR_OTST 0x00000003 /* status of output data transfer */
-#define I2S_AISTR_OTR 0x00000010 /* output transfer request pending */
-#define I2S_AISTR_OUR 0x00000020 /* output FIFO underrun detected */
-#define I2S_AISTR_OOR 0x00000040 /* output FIFO overrun detected */
-#define I2S_AISTR_ODS 0x00000100 /* output DMA transfer size */
-#define I2S_AISTR_ODE 0x00000400 /* output DMA transfer request enable */
-#define I2S_AISTR_OTRIE 0x00001000 /* output transfer request interrupt enable */
-#define I2S_AISTR_OURIE 0x00002000 /* output FIFO underrun interrupt enable */
-#define I2S_AISTR_OORIE 0x00004000 /* output FIFO overrun interrupt enable */
-#define I2S_AISTR__OUT_MASK 0x00007570
-#define I2S_AISTR_ITST 0x00030000 /* status of input data transfer */
-#define I2S_AISTR_ITST_SHIFT 16
-#define I2S_AISTR_ITR 0x00100000 /* input transfer request pending */
-#define I2S_AISTR_IUR 0x00200000 /* input FIFO underrun detected */
-#define I2S_AISTR_IOR 0x00400000 /* input FIFO overrun detected */
-#define I2S_AISTR_IDS 0x01000000 /* input DMA transfer size */
-#define I2S_AISTR_IDE 0x04000000 /* input DMA transfer request enable */
-#define I2S_AISTR_ITRIE 0x10000000 /* input transfer request interrupt enable */
-#define I2S_AISTR_IURIE 0x20000000 /* input FIFO underrun interrupt enable */
-#define I2S_AISTR_IORIE 0x40000000 /* input FIFO overrun interrupt enable */
-#define I2S_AISTR__IN_MASK 0x75700000
-
-#define I2S_AICR_MI 0x00000001 /* mono input requested */
-#define I2S_AICR_AMI 0x00000002 /* relation between LRCKI/FS1 and SDI */
-#define I2S_AICR_LRI 0x00000004 /* function of LRCKI pin */
-#define I2S_AICR_SDMI 0x00000070 /* format of input audio data */
-#define I2S_AICR_SDMI_SHIFT 4
-#define I2S_AICR_CLI 0x00000080 /* input FIFO clearing control */
-#define I2S_AICR_IM 0x00000300 /* input state control */
-#define I2S_AICR_IM_SHIFT 8
-#define I2S_AICR__IN_MASK 0x000003f7
-#define I2S_AICR_MO 0x00001000 /* mono output requested */
-#define I2S_AICR_AMO 0x00002000 /* relation between LRCKO/FS0 and SDO */
-#define I2S_AICR_AMO_SHIFT 13
-#define I2S_AICR_LRO 0x00004000 /* function of LRCKO pin */
-#define I2S_AICR_SDMO 0x00070000 /* format of output audio data */
-#define I2S_AICR_SDMO_SHIFT 16
-#define I2S_AICR_CLO 0x00080000 /* output FIFO clearing control */
-#define I2S_AICR_OM 0x00100000 /* output state control */
-#define I2S_AICR__OUT_MASK 0x001f7000
-#define I2S_AICR_DIV 0x03000000 /* frequency division rate */
-#define I2S_AICR_DIV_SHIFT 24
-#define I2S_AICR_FL 0x20000000 /* frame length */
-#define I2S_AICR_FS 0x40000000 /* frame sync method */
-#define I2S_AICR_ME 0x80000000 /* master enable */
-
-/*
- * PCMCIA
- */
-#define __addr_MB93493_PCMCIA(X) ((volatile unsigned long *)(__region_CS5 + (X)))
-
-/*
- * GPIO
- */
-#define __get_MB93493_GPIO_PDR(X) __get_MB93493(0x380 + (X) * 0xc0)
-#define __set_MB93493_GPIO_PDR(X,V) __set_MB93493(0x380 + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_GPDR(X) __get_MB93493(0x384 + (X) * 0xc0)
-#define __set_MB93493_GPIO_GPDR(X,V) __set_MB93493(0x384 + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_SIR(X) __get_MB93493(0x388 + (X) * 0xc0)
-#define __set_MB93493_GPIO_SIR(X,V) __set_MB93493(0x388 + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_SOR(X) __get_MB93493(0x38c + (X) * 0xc0)
-#define __set_MB93493_GPIO_SOR(X,V) __set_MB93493(0x38c + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_PDSR(X) __get_MB93493(0x390 + (X) * 0xc0)
-#define __set_MB93493_GPIO_PDSR(X,V) __set_MB93493(0x390 + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_PDCR(X) __get_MB93493(0x394 + (X) * 0xc0)
-#define __set_MB93493_GPIO_PDCR(X,V) __set_MB93493(0x394 + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_INTST(X) __get_MB93493(0x398 + (X) * 0xc0)
-#define __set_MB93493_GPIO_INTST(X,V) __set_MB93493(0x398 + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_IEHL(X) __get_MB93493(0x39c + (X) * 0xc0)
-#define __set_MB93493_GPIO_IEHL(X,V) __set_MB93493(0x39c + (X) * 0xc0, (V))
-
-#define __get_MB93493_GPIO_IELH(X) __get_MB93493(0x3a0 + (X) * 0xc0)
-#define __set_MB93493_GPIO_IELH(X,V) __set_MB93493(0x3a0 + (X) * 0xc0, (V))
-
-#endif /* _ASM_MB93493_REGS_H */
+++ /dev/null
-/* mc146818rtc.h: RTC defs
- *
- * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-
-#endif /* _ASM_MC146818RTC_H */
+++ /dev/null
-/* mem-layout.h: memory layout
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MEM_LAYOUT_H
-#define _ASM_MEM_LAYOUT_H
-
-#ifndef __ASSEMBLY__
-#define __UL(X) ((unsigned long) (X))
-#else
-#define __UL(X) (X)
-#endif
-
-/*
- * PAGE_SHIFT determines the page size
- */
-#define PAGE_SHIFT 14
-
-#ifndef __ASSEMBLY__
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#else
-#define PAGE_SIZE (1 << PAGE_SHIFT)
-#endif
-
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-/*
- * the slab must be aligned such that load- and store-double instructions don't
- * fault if used
- */
-#define ARCH_KMALLOC_MINALIGN 8
-#define ARCH_SLAB_MINALIGN 8
-
-/*****************************************************************************/
-/*
- * virtual memory layout from kernel's point of view
- */
-#define PAGE_OFFSET ((unsigned long) &__page_offset)
-
-#ifdef CONFIG_MMU
-
-/* see Documentation/frv/mmu-layout.txt */
-#define KERNEL_LOWMEM_START __UL(0xc0000000)
-#define KERNEL_LOWMEM_END __UL(0xd0000000)
-#define VMALLOC_START __UL(0xd0000000)
-#define VMALLOC_END __UL(0xd8000000)
-#define PKMAP_BASE __UL(0xd8000000)
-#define PKMAP_END __UL(0xdc000000)
-#define KMAP_ATOMIC_SECONDARY_FRAME __UL(0xdc000000)
-#define KMAP_ATOMIC_PRIMARY_FRAME __UL(0xdd000000)
-
-#endif
-
-#define KERNEL_IO_START __UL(0xe0000000)
-
-
-/*****************************************************************************/
-/*
- * memory layout from userspace's point of view
- */
-#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE)
-#define STACK_TOP __UL(2 * 1024 * 1024)
-#define STACK_TOP_MAX __UL(0xc0000000)
-
-/* userspace process size */
-#ifdef CONFIG_MMU
-#define TASK_SIZE (PAGE_OFFSET)
-#else
-#define TASK_SIZE __UL(0xFFFFFFFFUL)
-#endif
-
-/* base of area at which unspecified mmaps will start */
-#ifdef CONFIG_BINFMT_ELF_FDPIC
-#define TASK_UNMAPPED_BASE __UL(16 * 1024 * 1024)
-#else
-#define TASK_UNMAPPED_BASE __UL(TASK_SIZE / 3)
-#endif
-
-#endif /* _ASM_MEM_LAYOUT_H */
+++ /dev/null
-#ifndef __ASM_MMAN_H__
-#define __ASM_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* __ASM_MMAN_H__ */
-
+++ /dev/null
-/* mmu.h: memory management context for FR-V with or without MMU support
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_MMU_H
-#define _ASM_MMU_H
-
-typedef struct {
-#ifdef CONFIG_MMU
- struct list_head id_link; /* link in list of context ID owners */
- unsigned short id; /* MMU context ID */
- unsigned short id_busy; /* true if ID is in CXNR */
- unsigned long itlb_cached_pge; /* [SCR0] PGE cached for insn TLB handler */
- unsigned long itlb_ptd_mapping; /* [DAMR4] PTD mapping for itlb cached PGE */
- unsigned long dtlb_cached_pge; /* [SCR1] PGE cached for data TLB handler */
- unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */
-
-#else
- unsigned long end_brk;
-
-#endif
-
-#ifdef CONFIG_BINFMT_ELF_FDPIC
- unsigned long exec_fdpic_loadmap;
- unsigned long interp_fdpic_loadmap;
-#endif
-
-} mm_context_t;
-
-#ifdef CONFIG_MMU
-extern int __nongpreldata cxn_pinned;
-extern int cxn_pin_by_pid(pid_t pid);
-#endif
-
-#endif /* _ASM_MMU_H */
+++ /dev/null
-/* mmu_context.h: MMU context management routines
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_MMU_CONTEXT_H
-#define _ASM_MMU_CONTEXT_H
-
-#include <asm/setup.h>
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm-generic/mm_hooks.h>
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_MMU
-extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
-extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd);
-extern void destroy_context(struct mm_struct *mm);
-
-#else
-#define init_new_context(tsk, mm) ({ 0; })
-#define change_mm_context(old, ctx, _pml4) do {} while(0)
-#define destroy_context(mm) do {} while(0)
-#endif
-
-#define switch_mm(prev, next, tsk) \
-do { \
- if (prev != next) \
- change_mm_context(&prev->context, &next->context, next->pgd); \
-} while(0)
-
-#define activate_mm(prev, next) \
-do { \
- change_mm_context(&prev->context, &next->context, next->pgd); \
-} while(0)
-
-#define deactivate_mm(tsk, mm) \
-do { \
-} while(0)
-
-#endif
+++ /dev/null
-/* module.h: FRV module stuff
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
-
-struct mod_arch_specific
-{
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-/*
- * Include the architecture version.
- */
-#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
-
-#endif /* _ASM_MODULE_H */
-
+++ /dev/null
-#ifndef _ASM_MSGBUF_H
-#define _ASM_MSGBUF_H
-
-/*
- * The msqid64_ds structure for FR-V architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_MSGBUF_H */
-
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-#ifndef _ASM_PAGE_H
-#define _ASM_PAGE_H
-
-#include <asm/virtconvert.h>
-#include <asm/mem-layout.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-
-#ifndef __ASSEMBLY__
-
-#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
-#define free_user_page(page, addr) free_page(addr)
-
-#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
-#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE)
-
-#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
-#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long ste[64];} pmd_t;
-typedef struct { pmd_t pue[1]; } pud_t;
-typedef struct { pud_t pge[1]; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((x).ste[0])
-#define pud_val(x) ((x).pue[0])
-#define pgd_val(x) ((x).pge[0])
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pud(x) ((pud_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-#define PTE_MASK PAGE_MASK
-
-#define devmem_is_allowed(pfn) 1
-
-#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr))
-#define __va(paddr) phys_to_virt((unsigned long) (paddr))
-
-#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-
-extern unsigned long max_low_pfn;
-extern unsigned long min_low_pfn;
-extern unsigned long max_pfn;
-
-#ifdef CONFIG_MMU
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-#else
-#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
-#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
-
-#endif
-
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-
-#ifdef CONFIG_MMU
-#define VM_DATA_DEFAULT_FLAGS \
- (VM_READ | VM_WRITE | \
- ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* _ASM_PAGE_H */
+++ /dev/null
-#ifndef _ASM_PARAM_H
-#define _ASM_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ /* Internal kernel timer frequency */
-#define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 16384
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_PARAM_H */
+++ /dev/null
-/* pci.h: FR-V specific PCI declarations
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-m68k/pci.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef ASM_PCI_H
-#define ASM_PCI_H
-
-#include <linux/mm.h>
-#include <asm/scatterlist.h>
-#include <asm-generic/pci-dma-compat.h>
-#include <asm-generic/pci.h>
-
-struct pci_dev;
-
-#define pcibios_assign_all_busses() 0
-
-extern void pcibios_set_master(struct pci_dev *dev);
-
-extern void pcibios_penalize_isa_irq(int irq);
-
-#ifdef CONFIG_MMU
-extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle);
-extern void consistent_free(void *vaddr);
-extern void consistent_sync(void *vaddr, size_t size, int direction);
-extern void consistent_sync_page(struct page *page, unsigned long offset,
- size_t size, int direction);
-#endif
-
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
- dma_addr_t *dma_handle);
-
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
- void *vaddr, dma_addr_t dma_handle);
-
-/* Return the index of the PCI controller for device PDEV. */
-#define pci_controller_num(PDEV) (0)
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
- enum pci_dma_burst_strategy *strat,
- unsigned long *strategy_parameter)
-{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
-}
-#endif
-
-/*
- * These are pretty much arbitary with the CoMEM implementation.
- * We have the whole address space to ourselves.
- */
-#define PCIBIOS_MIN_IO 0x100
-#define PCIBIOS_MIN_MEM 0x00010000
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so. At the
- * next point you give the PCI dma address back to the card, the
- * device again owns the buffer.
- */
-static inline void pci_dma_sync_single(struct pci_dev *hwdev,
- dma_addr_t dma_handle,
- size_t size, int direction)
-{
- if (direction == PCI_DMA_NONE)
- BUG();
-
- frv_cache_wback_inv((unsigned long)bus_to_virt(dma_handle),
- (unsigned long)bus_to_virt(dma_handle) + size);
-}
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list,
- * same rules and usage.
- */
-static inline void pci_dma_sync_sg(struct pci_dev *hwdev,
- struct scatterlist *sg,
- int nelems, int direction)
-{
- int i;
-
- if (direction == PCI_DMA_NONE)
- BUG();
-
- for (i = 0; i < nelems; i++)
- frv_cache_wback_inv(sg_dma_address(&sg[i]),
- sg_dma_address(&sg[i])+sg_dma_len(&sg[i]));
-}
-
-
-#endif
+++ /dev/null
-#ifndef __ASM_PERCPU_H
-#define __ASM_PERCPU_H
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ASM_PERCPU_H */
+++ /dev/null
-/* pgalloc.h: Page allocation routines for FRV
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Derived from:
- * include/asm-m68knommu/pgalloc.h
- * include/asm-i386/pgalloc.h
- */
-#ifndef _ASM_PGALLOC_H
-#define _ASM_PGALLOC_H
-
-#include <asm/setup.h>
-#include <asm/virtconvert.h>
-
-#ifdef CONFIG_MMU
-
-#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE)
-#define pmd_populate(MM, PMD, PAGE) \
-do { \
- __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \
-} while(0)
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-/*
- * Allocate and free page tables.
- */
-
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *mm, pgd_t *);
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-
-extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long);
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
- free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
- pgtable_page_dtor(pte);
- __free_page(pte);
-}
-
-#define __pte_free_tlb(tlb,pte) \
-do { \
- pgtable_page_dtor(pte); \
- tlb_remove_page((tlb),(pte)); \
-} while (0)
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- * (In the PAE case we free the pmds as part of the pgd.)
- */
-#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); })
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb,x) do { } while (0)
-
-#endif /* CONFIG_MMU */
-
-#endif /* _ASM_PGALLOC_H */
+++ /dev/null
-/* pgtable.h: FR-V page table mangling
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Derived from:
- * include/asm-m68knommu/pgtable.h
- * include/asm-i386/pgtable.h
- */
-
-#ifndef _ASM_PGTABLE_H
-#define _ASM_PGTABLE_H
-
-#include <asm/mem-layout.h>
-#include <asm/setup.h>
-#include <asm/processor.h>
-
-#ifndef __ASSEMBLY__
-#include <linux/threads.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
-struct vm_area_struct;
-#endif
-
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_HIGHPTE)
-typedef unsigned long pte_addr_t;
-#else
-typedef pte_t *pte_addr_t;
-#endif
-#endif
-
-/*****************************************************************************/
-/*
- * MMU-less operation case first
- */
-#ifndef CONFIG_MMU
-
-#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp)
-#define kern_addr_valid(addr) (1)
-#define pmd_offset(a, b) ((void *) 0)
-
-#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */
-#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-#ifndef __ASSEMBLY__
-static inline int pte_file(pte_t pte) { return 0; }
-#endif
-
-#define ZERO_PAGE(vaddr) ({ BUG(); NULL; })
-
-#define swapper_pg_dir ((pgd_t *) NULL)
-
-#define pgtable_cache_init() do {} while (0)
-#define arch_enter_lazy_mmu_mode() do {} while (0)
-#define arch_leave_lazy_mmu_mode() do {} while (0)
-#define arch_enter_lazy_cpu_mode() do {} while (0)
-#define arch_leave_lazy_cpu_mode() do {} while (0)
-
-#else /* !CONFIG_MMU */
-/*****************************************************************************/
-/*
- * then MMU operation
- */
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#ifndef __ASSEMBLY__
-extern unsigned long empty_zero_page;
-#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page)
-#endif
-
-/*
- * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry)
- * [see Documentation/frv/mmu-layout.txt]
- *
- * Page Directory:
- * - Size: 16KB
- * - 64 PGEs per PGD
- * - Each PGE holds 1 PUD and covers 64MB
- *
- * Page Upper Directory:
- * - Size: 256B
- * - 1 PUE per PUD
- * - Each PUE holds 1 PMD and covers 64MB
- *
- * Page Mid-Level Directory
- * - Size: 256B
- * - 1 PME per PMD
- * - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table
- * - All STEs are instantiated at the same time
- *
- * Page Table
- * - Size: 16KB
- * - 4096 PTEs per PT
- * - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries
- *
- * Pages
- * - Size: 4KB
- *
- * total PTEs
- * = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs
- * = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT
- * = 262144 (or 256 * 1024)
- */
-#define PGDIR_SHIFT 26
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-#define PTRS_PER_PGD 64
-
-#define PUD_SHIFT 26
-#define PTRS_PER_PUD 1
-#define PUD_SIZE (1UL << PUD_SHIFT)
-#define PUD_MASK (~(PUD_SIZE - 1))
-#define PUE_SIZE 256
-
-#define PMD_SHIFT 26
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE - 1))
-#define PTRS_PER_PMD 1
-#define PME_SIZE 256
-
-#define __frv_PT_SIZE 256
-
-#define PTRS_PER_PTE 4096
-
-#define USER_PGDS_IN_LAST_PML4 (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
-
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS)
-
-#define TWOLEVEL_PGDIR_SHIFT 26
-#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
-#define BOOT_KERNEL_PGD_PTRS (PTRS_PER_PGD - BOOT_USER_PGD_PTRS)
-
-#ifndef __ASSEMBLY__
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte)
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pud_ERROR(e) \
- printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e)))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e))))
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) \
-do { \
- *(pteptr) = (pteval); \
- asm volatile("dcf %M0" :: "U"(*pteptr)); \
-} while(0)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * pgd_offset() returns a (pgd_t *)
- * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
- */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/*
- * a shortcut which implies the use of the kernel's pgd, instead
- * of a process's
- */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pud is never bad, and a pud always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-static inline void pgd_clear(pgd_t *pgd) { }
-
-#define pgd_populate(mm, pgd, pud) do { } while (0)
-/*
- * (puds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pgd(pgdptr, pgdval) \
-do { \
- memcpy((pgdptr), &(pgdval), sizeof(pgd_t)); \
- asm volatile("dcf %M0" :: "U"(*(pgdptr))); \
-} while(0)
-
-static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
-{
- return (pud_t *) pgd;
-}
-
-#define pgd_page(pgd) (pud_page((pud_t){ pgd }))
-#define pgd_page_vaddr(pgd) (pud_page_vaddr((pud_t){ pgd }))
-
-/*
- * allocating and freeing a pud is trivial: the 1-entry pud is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pud_alloc_one(mm, address) NULL
-#define pud_free(mm, x) do { } while (0)
-#define __pud_free_tlb(tlb, x) do { } while (0)
-
-/*
- * The "pud_xxx()" functions here are trivial for a folded two-level
- * setup: the pmd is never bad, and a pmd always exists (as it's folded
- * into the pud entry)
- */
-static inline int pud_none(pud_t pud) { return 0; }
-static inline int pud_bad(pud_t pud) { return 0; }
-static inline int pud_present(pud_t pud) { return 1; }
-static inline void pud_clear(pud_t *pud) { }
-
-#define pud_populate(mm, pmd, pte) do { } while (0)
-
-/*
- * (pmds are folded into puds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pud(pudptr, pudval) set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval })
-
-#define pud_page(pud) (pmd_page((pmd_t){ pud }))
-#define pud_page_vaddr(pud) (pmd_page_vaddr((pmd_t){ pud }))
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd);
-
-#define set_pmd(pmdptr, pmdval) \
-do { \
- __set_pmd((pmdptr), (pmdval).ste[0]); \
-} while(0)
-
-#define __pmd_index(address) 0
-
-static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address)
-{
- return (pmd_t *) dir + __pmd_index(address);
-}
-
-#define pte_same(a, b) ((a).pte == (b).pte)
-#define pte_page(x) (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT))))
-#define pte_none(x) (!(x).pte)
-#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT)))
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define VMALLOC_VMADDR(x) ((unsigned long) (x))
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * control flags in AMPR registers and TLB entries
- */
-#define _PAGE_BIT_PRESENT xAMPRx_V_BIT
-#define _PAGE_BIT_WP DAMPRx_WP_BIT
-#define _PAGE_BIT_NOCACHE xAMPRx_C_BIT
-#define _PAGE_BIT_SUPER xAMPRx_S_BIT
-#define _PAGE_BIT_ACCESSED xAMPRx_RESERVED8_BIT
-#define _PAGE_BIT_DIRTY xAMPRx_M_BIT
-#define _PAGE_BIT_NOTGLOBAL xAMPRx_NG_BIT
-
-#define _PAGE_PRESENT xAMPRx_V
-#define _PAGE_WP DAMPRx_WP
-#define _PAGE_NOCACHE xAMPRx_C
-#define _PAGE_SUPER xAMPRx_S
-#define _PAGE_ACCESSED xAMPRx_RESERVED8 /* accessed if set */
-#define _PAGE_DIRTY xAMPRx_M
-#define _PAGE_NOTGLOBAL xAMPRx_NG
-
-#define _PAGE_RESERVED_MASK (xAMPRx_RESERVED8 | xAMPRx_RESERVED13)
-
-#define _PAGE_FILE 0x002 /* set:pagecache unset:swap */
-#define _PAGE_PROTNONE 0x000 /* If not present */
-
-#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-#define __PGPROT_BASE \
- (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED)
-
-#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED __pgprot(__PGPROT_BASE)
-#define PAGE_COPY __pgprot(__PGPROT_BASE | _PAGE_WP)
-#define PAGE_READONLY __pgprot(__PGPROT_BASE | _PAGE_WP)
-
-#define __PAGE_KERNEL (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY)
-#define __PAGE_KERNEL_NOCACHE (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE)
-#define __PAGE_KERNEL_RO (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP)
-
-#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL)
-
-#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
-
-#define _PAGE_TABLE (_PAGE_PRESENT | xAMPRx_SS_16Kb)
-
-#ifndef __ASSEMBLY__
-
-/*
- * The FR451 can do execute protection by virtue of having separate TLB miss handlers for
- * instruction access and for data access. However, we don't have enough reserved bits to say
- * "execute only", so we don't bother. If you can read it, you can execute it and vice versa.
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY
-#define __P101 PAGE_READONLY
-#define __P110 PAGE_COPY
-#define __P111 PAGE_COPY
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY
-#define __S101 PAGE_READONLY
-#define __S110 PAGE_SHARED
-#define __S111 PAGE_SHARED
-
-/*
- * Define this to warn about kernel memory accesses that are
- * done without a 'access_ok(VERIFY_WRITE,..)'
- */
-#undef TEST_ACCESS_OK
-
-#define pte_present(x) (pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pmd_bad(x) (pmd_val(x) & xAMPRx_SS)
-#define pmd_clear(xp) do { __set_pmd(xp, 0); } while(0)
-
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
-#ifndef CONFIG_DISCONTIGMEM
-#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-#endif
-
-#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_dirty(pte_t pte) { return (pte).pte & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return (pte).pte & _PAGE_ACCESSED; }
-static inline int pte_write(pte_t pte) { return !((pte).pte & _PAGE_WP); }
-static inline int pte_special(pte_t pte) { return 0; }
-
-static inline pte_t pte_mkclean(pte_t pte) { (pte).pte &= ~_PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkold(pte_t pte) { (pte).pte &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte |= _PAGE_WP; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte &= ~_PAGE_WP; return pte; }
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
-{
- int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
- asm volatile("dcf %M0" :: "U"(*ptep));
- return i;
-}
-
-static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- unsigned long x = xchg(&ptep->pte, 0);
- asm volatile("dcf %M0" :: "U"(*ptep));
- return __pte(x);
-}
-
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- set_bit(_PAGE_BIT_WP, ptep);
- asm volatile("dcf %M0" :: "U"(*ptep));
-}
-
-/*
- * Macro to mark a page protection value as "uncacheable"
- */
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
-
-/* This takes a physical page address that is used by the remapping functions */
-#define mk_pte_phys(physpage, pgprot) pfn_pte((physpage) >> PAGE_SHIFT, pgprot)
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte.pte &= _PAGE_CHG_MASK;
- pte.pte |= pgprot_val(newprot);
- return pte;
-}
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-#define pgd_index_k(addr) pgd_index(addr)
-
-/* Find an entry in the bottom-level page table.. */
-#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
- ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
-
-#if defined(CONFIG_HIGHPTE)
-#define pte_offset_map(dir, address) \
- ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address))
-#define pte_offset_map_nested(dir, address) \
- ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE1) + pte_index(address))
-#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
-#define pte_unmap_nested(pte) kunmap_atomic((pte), KM_PTE1)
-#else
-#define pte_offset_map(dir, address) \
- ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
-#define pte_offset_map_nested(dir, address) pte_offset_map((dir), (address))
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
-#endif
-
-/*
- * Handle swap and file entries
- * - the PTE is encoded in the following format:
- * bit 0: Must be 0 (!_PAGE_PRESENT)
- * bit 1: Type: 0 for swap, 1 for file (_PAGE_FILE)
- * bits 2-7: Swap type
- * bits 8-31: Swap offset
- * bits 2-31: File pgoff
- */
-#define __swp_type(x) (((x).val >> 2) & 0x1f)
-#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
-#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-static inline int pte_file(pte_t pte)
-{
- return pte.pte & _PAGE_FILE;
-}
-
-#define PTE_FILE_MAX_BITS 29
-
-#define pte_to_pgoff(PTE) ((PTE).pte >> 2)
-#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define PageSkip(page) (0)
-#define kern_addr_valid(addr) (1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-#define __HAVE_ARCH_PTE_SAME
-#include <asm-generic/pgtable.h>
-
-/*
- * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache
- */
-static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
-{
- struct mm_struct *mm;
- unsigned long ampr;
-
- mm = current->mm;
- if (mm) {
- pgd_t *pge = pgd_offset(mm, address);
- pud_t *pue = pud_offset(pge, address);
- pmd_t *pme = pmd_offset(pue, address);
-
- ampr = pme->ste[0] & 0xffffff00;
- ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
- xAMPRx_V;
- } else {
- address = ULONG_MAX;
- ampr = 0;
- }
-
- asm volatile("movgs %0,scr0\n"
- "movgs %0,scr1\n"
- "movgs %1,dampr4\n"
- "movgs %1,dampr5\n"
- :
- : "r"(address), "r"(ampr)
- );
-}
-
-#ifdef CONFIG_PROC_FS
-extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer);
-#endif
-
-extern void __init pgtable_cache_init(void);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* !CONFIG_MMU */
-
-#ifndef __ASSEMBLY__
-extern void __init paging_init(void);
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_PGTABLE_H */
+++ /dev/null
-#ifndef _ASM_POLL_H
-#define _ASM_POLL_H
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 256
-
-#include <asm-generic/poll.h>
-
-#undef POLLREMOVE
-
-#endif
-
+++ /dev/null
-#ifndef _ASM_POSIX_TYPES_H
-#define _ASM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
- int val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) (!!((set)->fds_bits[__FDELT(d)] & __FDMASK(d)))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) */
-
-#endif
-
+++ /dev/null
-/* processor.h: FRV processor definitions
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_PROCESSOR_H
-#define _ASM_PROCESSOR_H
-
-#include <asm/mem-layout.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-#include <linux/compiler.h>
-#include <linux/linkage.h>
-#include <asm/sections.h>
-#include <asm/segment.h>
-#include <asm/fpu.h>
-#include <asm/registers.h>
-#include <asm/ptrace.h>
-#include <asm/current.h>
-#include <asm/cache.h>
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- */
-struct cpuinfo_frv {
-#ifdef CONFIG_MMU
- unsigned long *pgd_quick;
- unsigned long *pte_quick;
- unsigned long pgtable_cache_sz;
-#endif
-} __cacheline_aligned;
-
-extern struct cpuinfo_frv __nongprelbss boot_cpu_data;
-
-#define cpu_data (&boot_cpu_data)
-#define current_cpu_data boot_cpu_data
-
-/*
- * Bus types
- */
-#define EISA_bus 0
-#define MCA_bus 0
-
-struct thread_struct {
- struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */
- struct task_struct *curr; /* [GR29] current pointer for this thread */
- unsigned long sp; /* [GR1 ] kernel stack pointer */
- unsigned long fp; /* [GR2 ] kernel frame pointer */
- unsigned long lr; /* link register */
- unsigned long pc; /* program counter */
- unsigned long gr[12]; /* [GR16-GR27] */
- unsigned long sched_lr; /* LR from schedule() */
-
- union {
- struct pt_regs *frame0; /* top (user) stack frame */
- struct user_context *user; /* userspace context */
- };
-} __attribute__((aligned(8)));
-
-extern struct pt_regs *__kernel_frame0_ptr;
-extern struct task_struct *__kernel_current_task;
-
-#endif
-
-#ifndef __ASSEMBLY__
-#define INIT_THREAD_FRAME0 \
- ((struct pt_regs *) \
- (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context)))
-
-#define INIT_THREAD { \
- NULL, \
- (struct task_struct *) init_stack, \
- 0, 0, 0, 0, \
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \
- 0, \
- { INIT_THREAD_FRAME0 }, \
-}
-
-/*
- * do necessary setup to start up a newly executed thread.
- * - need to discard the frame stacked by init() invoking the execve syscall
- */
-#define start_thread(_regs, _pc, _usp) \
-do { \
- set_fs(USER_DS); /* reads from user space */ \
- __frame = __kernel_frame0_ptr; \
- __frame->pc = (_pc); \
- __frame->psr &= ~PSR_S; \
- __frame->sp = (_usp); \
-} while(0)
-
-extern void prepare_to_copy(struct task_struct *tsk);
-
-/* Free all resources held by a thread. */
-static inline void release_thread(struct task_struct *dead_task)
-{
-}
-
-extern asmlinkage int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-extern asmlinkage void save_user_regs(struct user_context *target);
-extern asmlinkage void *restore_user_regs(const struct user_context *target, ...);
-
-#define copy_segments(tsk, mm) do { } while (0)
-#define release_segments(mm) do { } while (0)
-#define forget_segments() do { } while (0)
-
-/*
- * Free current thread data structures etc..
- */
-static inline void exit_thread(void)
-{
-}
-
-/*
- * Return saved PC of a blocked thread.
- */
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc)
-#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp)
-
-/* Allocation and freeing of basic task resources. */
-extern struct task_struct *alloc_task_struct(void);
-extern void free_task_struct(struct task_struct *p);
-
-#define cpu_relax() barrier()
-
-/* data cache prefetch */
-#define ARCH_HAS_PREFETCH
-static inline void prefetch(const void *x)
-{
- asm volatile("dcpl %0,gr0,#0" : : "r"(x));
-}
-
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_PROCESSOR_H */
+++ /dev/null
-/* ptrace.h: ptrace() relevant definitions
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_PTRACE_H
-#define _ASM_PTRACE_H
-
-#include <asm/registers.h>
-#ifdef __KERNEL__
-#include <asm/irq_regs.h>
-
-#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0)
-#endif
-
-
-#define PT_PSR 0
-#define PT_ISR 1
-#define PT_CCR 2
-#define PT_CCCR 3
-#define PT_LR 4
-#define PT_LCR 5
-#define PT_PC 6
-
-#define PT__STATUS 7 /* exception status */
-#define PT_SYSCALLNO 8 /* syscall number or -1 */
-#define PT_ORIG_GR8 9 /* saved GR8 for signal handling */
-#define PT_GNER0 10
-#define PT_GNER1 11
-#define PT_IACC0H 12
-#define PT_IACC0L 13
-
-#define PT_GR(j) ( 14 + (j)) /* GRj for 0<=j<=63 */
-#define PT_FR(j) ( 78 + (j)) /* FRj for 0<=j<=63 */
-#define PT_FNER(j) (142 + (j)) /* FNERj for 0<=j<=1 */
-#define PT_MSR(j) (144 + (j)) /* MSRj for 0<=j<=2 */
-#define PT_ACC(j) (146 + (j)) /* ACCj for 0<=j<=7 */
-#define PT_ACCG(jklm) (154 + (jklm)) /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */
-#define PT_FSR(j) (156 + (j)) /* FSRj for 0<=j<=0 */
-#define PT__GPEND 78
-#define PT__END 157
-
-#define PT_TBR PT_GR(0)
-#define PT_SP PT_GR(1)
-#define PT_FP PT_GR(2)
-#define PT_PREV_FRAME PT_GR(28) /* previous exception frame pointer (old gr28 value) */
-#define PT_CURR_TASK PT_GR(29) /* current task */
-
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */
-
-#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */
-#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-/*
- * we dedicate GR28 to keeping a pointer to the current exception frame
- * - gr28 is destroyed on entry to the kernel from userspace
- */
-register struct pt_regs *__frame asm("gr28");
-
-#define user_mode(regs) (!((regs)->psr & PSR_S))
-#define instruction_pointer(regs) ((regs)->pc)
-
-extern unsigned long user_stack(const struct pt_regs *);
-extern void show_regs(struct pt_regs *);
-#define profile_pc(regs) ((regs)->pc)
-#endif
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_PTRACE_H */
+++ /dev/null
-/* registers.h: register frame declarations
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * notes:
- *
- * (1) that the members of all these structures are carefully aligned to permit
- * usage of STD/STDF instructions
- *
- * (2) if you change these structures, you must change the code in
- * arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c}
- *
- *
- * the kernel stack space block looks like this:
- *
- * +0x2000 +----------------------
- * | union {
- * | struct frv_frame0 {
- * | struct user_context {
- * | struct user_int_regs
- * | struct user_fpmedia_regs
- * | }
- * | struct frv_debug_regs
- * | }
- * | struct pt_regs [user exception]
- * | }
- * +---------------------- <-- __kernel_frame0_ptr (maybe GR28)
- * |
- * | kernel stack
- * |
- * |......................
- * | struct pt_regs [kernel exception]
- * |...................... <-- __kernel_frame0_ptr (maybe GR28)
- * |
- * | kernel stack
- * |
- * |...................... <-- stack pointer (GR1)
- * |
- * | unused stack space
- * |
- * +----------------------
- * | struct thread_info
- * +0x0000 +---------------------- <-- __current_thread_info (GR15);
- *
- * note that GR28 points to the current exception frame
- */
-
-#ifndef _ASM_REGISTERS_H
-#define _ASM_REGISTERS_H
-
-#ifndef __ASSEMBLY__
-#define __OFFSET(X,N) ((X)+(N)*4)
-#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx
-#else
-#define __OFFSET(X,N) ((X)+(N)*4)
-#define __OFFSETC(X,N) ((X)+(N))
-#endif
-
-/*****************************************************************************/
-/*
- * Exception/Interrupt frame
- * - held on kernel stack
- * - 8-byte aligned on stack (old SP is saved in frame)
- * - GR0 is fixed 0, so we don't save it
- */
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
- unsigned long psr; /* Processor Status Register */
- unsigned long isr; /* Integer Status Register */
- unsigned long ccr; /* Condition Code Register */
- unsigned long cccr; /* Condition Code for Conditional Insns Register */
- unsigned long lr; /* Link Register */
- unsigned long lcr; /* Loop Count Register */
- unsigned long pc; /* Program Counter Register */
- unsigned long __status; /* exception status */
- unsigned long syscallno; /* syscall number or -1 */
- unsigned long orig_gr8; /* original syscall arg #1 */
- unsigned long gner0;
- unsigned long gner1;
- unsigned long long iacc0;
- unsigned long tbr; /* GR0 is fixed zero, so we use this for TBR */
- unsigned long sp; /* GR1: USP/KSP */
- unsigned long fp; /* GR2: FP */
- unsigned long gr3;
- unsigned long gr4;
- unsigned long gr5;
- unsigned long gr6;
- unsigned long gr7; /* syscall number */
- unsigned long gr8; /* 1st syscall param; syscall return */
- unsigned long gr9; /* 2nd syscall param */
- unsigned long gr10; /* 3rd syscall param */
- unsigned long gr11; /* 4th syscall param */
- unsigned long gr12; /* 5th syscall param */
- unsigned long gr13; /* 6th syscall param */
- unsigned long gr14;
- unsigned long gr15;
- unsigned long gr16; /* GP pointer */
- unsigned long gr17; /* small data */
- unsigned long gr18; /* PIC/PID */
- unsigned long gr19;
- unsigned long gr20;
- unsigned long gr21;
- unsigned long gr22;
- unsigned long gr23;
- unsigned long gr24;
- unsigned long gr25;
- unsigned long gr26;
- unsigned long gr27;
- struct pt_regs *next_frame; /* GR28 - next exception frame */
- unsigned long gr29; /* GR29 - OS reserved */
- unsigned long gr30; /* GR30 - OS reserved */
- unsigned long gr31; /* GR31 - OS reserved */
-} __attribute__((aligned(8)));
-
-#endif
-
-#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */
-#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */
-#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */
-#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */
-#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */
-
-#define REG_GR(R) __OFFSET(REG_GR0, (R))
-
-#define REG_SP REG_GR(1)
-#define REG_FP REG_GR(2)
-#define REG_PREV_FRAME REG_GR(28) /* previous exception frame pointer (old gr28 value) */
-#define REG_CURR_TASK REG_GR(29) /* current task */
-
-/*****************************************************************************/
-/*
- * debugging registers
- */
-#ifndef __ASSEMBLY__
-
-struct frv_debug_regs
-{
- unsigned long dcr;
- unsigned long ibar[4] __attribute__((aligned(8)));
- unsigned long dbar[4] __attribute__((aligned(8)));
- unsigned long dbdr[4][4] __attribute__((aligned(8)));
- unsigned long dbmr[4][4] __attribute__((aligned(8)));
-} __attribute__((aligned(8)));
-
-#endif
-
-/*****************************************************************************/
-/*
- * userspace registers
- */
-#ifndef __ASSEMBLY__
-
-struct user_int_regs
-{
- /* integer registers
- * - up to gr[31] mirror pt_regs
- * - total size must be multiple of 8 bytes
- */
- unsigned long psr; /* Processor Status Register */
- unsigned long isr; /* Integer Status Register */
- unsigned long ccr; /* Condition Code Register */
- unsigned long cccr; /* Condition Code for Conditional Insns Register */
- unsigned long lr; /* Link Register */
- unsigned long lcr; /* Loop Count Register */
- unsigned long pc; /* Program Counter Register */
- unsigned long __status; /* exception status */
- unsigned long syscallno; /* syscall number or -1 */
- unsigned long orig_gr8; /* original syscall arg #1 */
- unsigned long gner[2];
- unsigned long long iacc[1];
-
- union {
- unsigned long tbr;
- unsigned long gr[64];
- };
-};
-
-struct user_fpmedia_regs
-{
- /* FP/Media registers */
- unsigned long fr[64];
- unsigned long fner[2];
- unsigned long msr[2];
- unsigned long acc[8];
- unsigned char accg[8];
- unsigned long fsr[1];
-};
-
-struct user_context
-{
- struct user_int_regs i;
- struct user_fpmedia_regs f;
-
- /* we provide a context extension so that we can save the regs for CPUs that
- * implement many more of Fujitsu's lavish register spec
- */
- void *extension;
-} __attribute__((aligned(8)));
-
-struct frv_frame0 {
- union {
- struct pt_regs regs;
- struct user_context uc;
- };
-
- struct frv_debug_regs debug;
-
-} __attribute__((aligned(32)));
-
-#endif
-
-#define __INT_GR(R) __OFFSET(__INT_GR0, (R))
-
-#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R))
-#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R))
-#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R))
-#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R))
-#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R))
-#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R))
-
-#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16)
-
-#endif /* _ASM_REGISTERS_H */
+++ /dev/null
-#ifndef _ASM_RESOURCE_H
-#define _ASM_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _ASM_RESOURCE_H */
-
+++ /dev/null
-#ifndef _ASM_SCATTERLIST_H
-#define _ASM_SCATTERLIST_H
-
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_buf(sg, some_ptr, length);
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset; /* for highmem, page offset */
-
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-
-#endif /* !_ASM_SCATTERLIST_H */
+++ /dev/null
-/* sections.h: linkage layout variables
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SECTIONS_H
-#define _ASM_SECTIONS_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <asm-generic/sections.h>
-
-#ifdef __KERNEL__
-
-/*
- * we don't want to put variables in the GP-REL section if they're not used very much - that would
- * be waste since GP-REL addressing is limited to GP16+/-2048
- */
-#define __nongpreldata __attribute__((section(".data")))
-#define __nongprelbss __attribute__((section(".bss")))
-
-/*
- * linker symbols
- */
-extern const void __kernel_image_start, __kernel_image_end, __page_offset;
-
-extern unsigned long __nongprelbss memory_start;
-extern unsigned long __nongprelbss memory_end;
-extern unsigned long __nongprelbss rom_length;
-
-/* determine if we're running from ROM */
-static inline int is_in_rom(unsigned long addr)
-{
- return 0; /* default case: not in ROM */
-}
-
-#endif
-#endif
-#endif /* _ASM_SECTIONS_H */
+++ /dev/null
-/* segment.h: MMU segment settings
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SEGMENT_H
-#define _ASM_SEGMENT_H
-
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL)
-
-#ifdef CONFIG_MMU
-#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
-#else
-#define USER_DS KERNEL_DS
-#endif
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (__current_thread_info->addr_limit)
-#define segment_eq(a,b) ((a).seg == (b).seg)
-#define __kernel_ds_p() segment_eq(get_fs(), KERNEL_DS)
-#define get_addr_limit() (get_fs().seg)
-
-#define set_fs(_x) \
-do { \
- __current_thread_info->addr_limit = (_x); \
-} while(0)
-
-
-#endif /* __ASSEMBLY__ */
-#endif /* _ASM_SEGMENT_H */
+++ /dev/null
-#ifndef _ASM_SEMBUF_H
-#define _ASM_SEMBUF_H
-
-/*
- * The semid64_ds structure for FR-V architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_SEMBUF_H */
-
+++ /dev/null
-/* serial-regs.h: serial port registers
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SERIAL_REGS_H
-#define _ASM_SERIAL_REGS_H
-
-#include <linux/serial_reg.h>
-#include <asm/irc-regs.h>
-
-#define SERIAL_ICLK 33333333 /* the target serial input clock */
-#define UART0_BASE 0xfeff9c00
-#define UART1_BASE 0xfeff9c40
-
-#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; })
-#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; })
-#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0)
-#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0)
-
-#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); })
-#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); })
-
-#define __set_UART0_IER(V) __set_UART0(UART_IER,(V))
-#define __set_UART1_IER(V) __set_UART1(UART_IER,(V))
-
-/* serial prescaler select register */
-#define __get_UCPSR() ({ *(volatile unsigned long *)(0xfeff9c90); })
-#define __set_UCPSR(V) do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0)
-#define UCPSR_SELECT0 0x07000000
-#define UCPSR_SELECT1 0x38000000
-
-/* serial prescaler base value register */
-#define __get_UCPVR() ({ *(volatile unsigned long *)(0xfeff9c98); mb(); })
-#define __set_UCPVR(V) do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0)
-
-
-#endif /* _ASM_SERIAL_REGS_H */
+++ /dev/null
-/*
- * serial.h
- *
- * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/)
- * Author: Bernardo Innocenti <bernie@codewiz.org>
- *
- * Based on linux/include/asm-i386/serial.h
- */
-#include <asm/serial-regs.h>
-
-/*
- * the base baud is derived from the clock speed and so is variable
- */
-#define BASE_BAUD 0
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS
+++ /dev/null
-/* setup.h: setup stuff
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SETUP_H
-#define _ASM_SETUP_H
-
-#define COMMAND_LINE_SIZE 512
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_MMU
-extern unsigned long __initdata num_mappedpages;
-#endif
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_SETUP_H */
+++ /dev/null
-#ifndef _ASM_SHMBUF_H
-#define _ASM_SHMBUF_H
-
-/*
- * The shmid64_ds structure for FR-V architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_SHMBUF_H */
-
+++ /dev/null
-#ifndef _ASM_SHMPARAM_H
-#define _ASM_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_SHMPARAM_H */
-
+++ /dev/null
-/* sigcontext.h: FRV signal context
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_SIGCONTEXT_H
-#define _ASM_SIGCONTEXT_H
-
-#include <asm/registers.h>
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked. Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
- struct user_context sc_context;
- unsigned long sc_oldmask; /* old sigmask */
-} __attribute__((aligned(8)));
-
-#endif
+++ /dev/null
-#ifndef _ASM_SIGINFO_H
-#define _ASM_SIGINFO_H
-
-#include <linux/types.h>
-#include <asm-generic/siginfo.h>
-
-#define FPE_MDAOVF (__SI_FAULT|9) /* media overflow */
-#undef NSIGFPE
-#define NSIGFPE 9
-
-#endif
-
+++ /dev/null
-#ifndef _ASM_SIGNAL_H
-#define _ASM_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002 /* not supported yet */
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_SIGNAL_H */
+++ /dev/null
-#ifndef __ASM_SMP_H
-#define __ASM_SMP_H
-
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-#endif
+++ /dev/null
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_SOCKET_H */
-
+++ /dev/null
-#ifndef _ASM_SOCKIOS__
-#define _ASM_SOCKIOS__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_SOCKIOS__ */
-
+++ /dev/null
-/* spinlock.h: spinlocks for FR-V
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SPINLOCK_H
-#define _ASM_SPINLOCK_H
-
-#error no spinlocks for FR-V yet
-
-#endif /* _ASM_SPINLOCK_H */
+++ /dev/null
-/* spr-regs.h: special-purpose registers on the FRV
- *
- * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SPR_REGS_H
-#define _ASM_SPR_REGS_H
-
-/*
- * PSR - Processor Status Register
- */
-#define PSR_ET 0x00000001 /* enable interrupts/exceptions flag */
-#define PSR_PS 0x00000002 /* previous supervisor mode flag */
-#define PSR_S 0x00000004 /* supervisor mode flag */
-#define PSR_PIL 0x00000078 /* processor external interrupt level */
-#define PSR_PIL_0 0x00000000 /* - no interrupt in progress */
-#define PSR_PIL_13 0x00000068 /* - debugging only */
-#define PSR_PIL_14 0x00000070 /* - debugging in progress */
-#define PSR_PIL_15 0x00000078 /* - NMI in progress */
-#define PSR_EM 0x00000080 /* enable media operation */
-#define PSR_EF 0x00000100 /* enable FPU operation */
-#define PSR_BE 0x00001000 /* endianness mode */
-#define PSR_BE_LE 0x00000000 /* - little endian mode */
-#define PSR_BE_BE 0x00001000 /* - big endian mode */
-#define PSR_CM 0x00002000 /* conditional mode */
-#define PSR_NEM 0x00004000 /* non-excepting mode */
-#define PSR_ICE 0x00010000 /* in-circuit emulation mode */
-#define PSR_VERSION_SHIFT 24 /* CPU silicon ID */
-#define PSR_IMPLE_SHIFT 28 /* CPU core ID */
-
-#define PSR_VERSION(psr) (((psr) >> PSR_VERSION_SHIFT) & 0xf)
-#define PSR_IMPLE(psr) (((psr) >> PSR_IMPLE_SHIFT) & 0xf)
-
-#define PSR_IMPLE_FR401 0x2
-#define PSR_VERSION_FR401_MB93401 0x0
-#define PSR_VERSION_FR401_MB93401A 0x1
-#define PSR_VERSION_FR401_MB93403 0x2
-
-#define PSR_IMPLE_FR405 0x4
-#define PSR_VERSION_FR405_MB93405 0x0
-
-#define PSR_IMPLE_FR451 0x5
-#define PSR_VERSION_FR451_MB93451 0x0
-
-#define PSR_IMPLE_FR501 0x1
-#define PSR_VERSION_FR501_MB93501 0x1
-#define PSR_VERSION_FR501_MB93501A 0x2
-
-#define PSR_IMPLE_FR551 0x3
-#define PSR_VERSION_FR551_MB93555 0x1
-
-#define __get_PSR() ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; })
-#define __set_PSR(V) do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0)
-
-/*
- * TBR - Trap Base Register
- */
-#define TBR_TT 0x00000ff0
-#define TBR_TT_INSTR_MMU_MISS (0x01 << 4)
-#define TBR_TT_INSTR_ACC_ERROR (0x02 << 4)
-#define TBR_TT_INSTR_ACC_EXCEP (0x03 << 4)
-#define TBR_TT_PRIV_INSTR (0x06 << 4)
-#define TBR_TT_ILLEGAL_INSTR (0x07 << 4)
-#define TBR_TT_FP_EXCEPTION (0x0d << 4)
-#define TBR_TT_MP_EXCEPTION (0x0e << 4)
-#define TBR_TT_DATA_ACC_ERROR (0x11 << 4)
-#define TBR_TT_DATA_MMU_MISS (0x12 << 4)
-#define TBR_TT_DATA_ACC_EXCEP (0x13 << 4)
-#define TBR_TT_DATA_STR_ERROR (0x14 << 4)
-#define TBR_TT_DIVISION_EXCEP (0x17 << 4)
-#define TBR_TT_COMMIT_EXCEP (0x19 << 4)
-#define TBR_TT_INSTR_TLB_MISS (0x1a << 4)
-#define TBR_TT_DATA_TLB_MISS (0x1b << 4)
-#define TBR_TT_DATA_DAT_EXCEP (0x1d << 4)
-#define TBR_TT_DECREMENT_TIMER (0x1f << 4)
-#define TBR_TT_COMPOUND_EXCEP (0x20 << 4)
-#define TBR_TT_INTERRUPT_1 (0x21 << 4)
-#define TBR_TT_INTERRUPT_2 (0x22 << 4)
-#define TBR_TT_INTERRUPT_3 (0x23 << 4)
-#define TBR_TT_INTERRUPT_4 (0x24 << 4)
-#define TBR_TT_INTERRUPT_5 (0x25 << 4)
-#define TBR_TT_INTERRUPT_6 (0x26 << 4)
-#define TBR_TT_INTERRUPT_7 (0x27 << 4)
-#define TBR_TT_INTERRUPT_8 (0x28 << 4)
-#define TBR_TT_INTERRUPT_9 (0x29 << 4)
-#define TBR_TT_INTERRUPT_10 (0x2a << 4)
-#define TBR_TT_INTERRUPT_11 (0x2b << 4)
-#define TBR_TT_INTERRUPT_12 (0x2c << 4)
-#define TBR_TT_INTERRUPT_13 (0x2d << 4)
-#define TBR_TT_INTERRUPT_14 (0x2e << 4)
-#define TBR_TT_INTERRUPT_15 (0x2f << 4)
-#define TBR_TT_TRAP0 (0x80 << 4)
-#define TBR_TT_TRAP1 (0x81 << 4)
-#define TBR_TT_TRAP2 (0x82 << 4)
-#define TBR_TT_TRAP3 (0x83 << 4)
-#define TBR_TT_TRAP120 (0xf8 << 4)
-#define TBR_TT_TRAP121 (0xf9 << 4)
-#define TBR_TT_TRAP122 (0xfa << 4)
-#define TBR_TT_TRAP123 (0xfb << 4)
-#define TBR_TT_TRAP124 (0xfc << 4)
-#define TBR_TT_TRAP125 (0xfd << 4)
-#define TBR_TT_TRAP126 (0xfe << 4)
-#define TBR_TT_BREAK (0xff << 4)
-
-#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120
-#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121
-#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122
-#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123
-#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124
-#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125
-#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126
-
-#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
-
-/*
- * HSR0 - Hardware Status Register 0
- */
-#define HSR0_PDM 0x00000007 /* power down mode */
-#define HSR0_PDM_NORMAL 0x00000000 /* - normal mode */
-#define HSR0_PDM_CORE_SLEEP 0x00000001 /* - CPU core sleep mode */
-#define HSR0_PDM_BUS_SLEEP 0x00000003 /* - bus sleep mode */
-#define HSR0_PDM_PLL_RUN 0x00000005 /* - PLL run */
-#define HSR0_PDM_PLL_STOP 0x00000007 /* - PLL stop */
-#define HSR0_GRLE 0x00000040 /* GR lower register set enable */
-#define HSR0_GRHE 0x00000080 /* GR higher register set enable */
-#define HSR0_FRLE 0x00000100 /* FR lower register set enable */
-#define HSR0_FRHE 0x00000200 /* FR higher register set enable */
-#define HSR0_GRN 0x00000400 /* GR quantity */
-#define HSR0_GRN_64 0x00000000 /* - 64 GR registers */
-#define HSR0_GRN_32 0x00000400 /* - 32 GR registers */
-#define HSR0_FRN 0x00000800 /* FR quantity */
-#define HSR0_FRN_64 0x00000000 /* - 64 FR registers */
-#define HSR0_FRN_32 0x00000800 /* - 32 FR registers */
-#define HSR0_SA 0x00001000 /* start address (RAMBOOT#) */
-#define HSR0_ETMI 0x00008000 /* enable TIMERI (64-bit up timer) */
-#define HSR0_ETMD 0x00004000 /* enable TIMERD (32-bit down timer) */
-#define HSR0_PEDAT 0x00010000 /* previous DAT mode */
-#define HSR0_XEDAT 0x00020000 /* exception DAT mode */
-#define HSR0_EDAT 0x00080000 /* enable DAT mode */
-#define HSR0_RME 0x00400000 /* enable RAM mode */
-#define HSR0_EMEM 0x00800000 /* enable MMU_Miss mask */
-#define HSR0_EXMMU 0x01000000 /* enable extended MMU mode */
-#define HSR0_EDMMU 0x02000000 /* enable data MMU */
-#define HSR0_EIMMU 0x04000000 /* enable instruction MMU */
-#define HSR0_CBM 0x08000000 /* copy back mode */
-#define HSR0_CBM_WRITE_THRU 0x00000000 /* - write through */
-#define HSR0_CBM_COPY_BACK 0x08000000 /* - copy back */
-#define HSR0_NWA 0x10000000 /* no write allocate */
-#define HSR0_DCE 0x40000000 /* data cache enable */
-#define HSR0_ICE 0x80000000 /* instruction cache enable */
-
-#define __get_HSR(R) ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; })
-#define __set_HSR(R,V) do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0)
-
-/*
- * CCR - Condition Codes Register
- */
-#define CCR_FCC0 0x0000000f /* FP/Media condition 0 (fcc0 reg) */
-#define CCR_FCC1 0x000000f0 /* FP/Media condition 1 (fcc1 reg) */
-#define CCR_FCC2 0x00000f00 /* FP/Media condition 2 (fcc2 reg) */
-#define CCR_FCC3 0x0000f000 /* FP/Media condition 3 (fcc3 reg) */
-#define CCR_ICC0 0x000f0000 /* Integer condition 0 (icc0 reg) */
-#define CCR_ICC0_C 0x00010000 /* - Carry flag */
-#define CCR_ICC0_V 0x00020000 /* - Overflow flag */
-#define CCR_ICC0_Z 0x00040000 /* - Zero flag */
-#define CCR_ICC0_N 0x00080000 /* - Negative flag */
-#define CCR_ICC1 0x00f00000 /* Integer condition 1 (icc1 reg) */
-#define CCR_ICC2 0x0f000000 /* Integer condition 2 (icc2 reg) */
-#define CCR_ICC3 0xf0000000 /* Integer condition 3 (icc3 reg) */
-
-/*
- * CCCR - Condition Codes for Conditional Instructions Register
- */
-#define CCCR_CC0 0x00000003 /* condition 0 (cc0 reg) */
-#define CCCR_CC0_FALSE 0x00000002 /* - condition is false */
-#define CCCR_CC0_TRUE 0x00000003 /* - condition is true */
-#define CCCR_CC1 0x0000000c /* condition 1 (cc1 reg) */
-#define CCCR_CC2 0x00000030 /* condition 2 (cc2 reg) */
-#define CCCR_CC3 0x000000c0 /* condition 3 (cc3 reg) */
-#define CCCR_CC4 0x00000300 /* condition 4 (cc4 reg) */
-#define CCCR_CC5 0x00000c00 /* condition 5 (cc5 reg) */
-#define CCCR_CC6 0x00003000 /* condition 6 (cc6 reg) */
-#define CCCR_CC7 0x0000c000 /* condition 7 (cc7 reg) */
-
-/*
- * ISR - Integer Status Register
- */
-#define ISR_EMAM 0x00000001 /* memory misaligned access handling */
-#define ISR_EMAM_EXCEPTION 0x00000000 /* - generate exception */
-#define ISR_EMAM_FUDGE 0x00000001 /* - mask out invalid address bits */
-#define ISR_AEXC 0x00000004 /* accrued [overflow] exception */
-#define ISR_DTT 0x00000018 /* division type trap */
-#define ISR_DTT_IGNORE 0x00000000 /* - ignore division error */
-#define ISR_DTT_DIVBYZERO 0x00000008 /* - generate exception */
-#define ISR_DTT_OVERFLOW 0x00000010 /* - record overflow */
-#define ISR_EDE 0x00000020 /* enable division exception */
-#define ISR_PLI 0x20000000 /* pre-load instruction information */
-#define ISR_QI 0x80000000 /* quad data implementation information */
-
-/*
- * EPCR0 - Exception PC Register
- */
-#define EPCR0_V 0x00000001 /* register content validity indicator */
-#define EPCR0_PC 0xfffffffc /* faulting instruction address */
-
-/*
- * ESR0/14/15 - Exception Status Register
- */
-#define ESRx_VALID 0x00000001 /* register content validity indicator */
-#define ESRx_EC 0x0000003e /* exception type */
-#define ESRx_EC_DATA_STORE 0x00000000 /* - data_store_error */
-#define ESRx_EC_INSN_ACCESS 0x00000006 /* - instruction_access_error */
-#define ESRx_EC_PRIV_INSN 0x00000008 /* - privileged_instruction */
-#define ESRx_EC_ILL_INSN 0x0000000a /* - illegal_instruction */
-#define ESRx_EC_MP_EXCEP 0x0000001c /* - mp_exception */
-#define ESRx_EC_DATA_ACCESS 0x00000020 /* - data_access_error */
-#define ESRx_EC_DIVISION 0x00000026 /* - division_exception */
-#define ESRx_EC_ITLB_MISS 0x00000034 /* - instruction_access_TLB_miss */
-#define ESRx_EC_DTLB_MISS 0x00000036 /* - data_access_TLB_miss */
-#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a /* - data_access_DAT_exception */
-
-#define ESR0_IAEC 0x00000100 /* info for instruction-access-exception */
-#define ESR0_IAEC_RESV 0x00000000 /* - reserved */
-#define ESR0_IAEC_PROT_VIOL 0x00000100 /* - protection violation */
-
-#define ESR0_ATXC 0x00f00000 /* address translation exception code */
-#define ESR0_ATXC_MMU_MISS 0x00000000 /* - MMU miss exception and more (?) */
-#define ESR0_ATXC_MULTI_DAT 0x00800000 /* - multiple DAT entry hit */
-#define ESR0_ATXC_MULTI_SAT 0x00900000 /* - multiple SAT entry hit */
-#define ESR0_ATXC_AMRTLB_MISS 0x00a00000 /* - MMU/TLB miss exception */
-#define ESR0_ATXC_PRIV_EXCEP 0x00c00000 /* - privilege protection fault */
-#define ESR0_ATXC_WP_EXCEP 0x00d00000 /* - write protection fault */
-
-#define ESR0_EAV 0x00000800 /* true if EAR0 register valid */
-#define ESR15_EAV 0x00000800 /* true if EAR15 register valid */
-
-/*
- * ESFR1 - Exception Status Valid Flag Register
- */
-#define ESFR1_ESR0 0x00000001 /* true if ESR0 is valid */
-#define ESFR1_ESR14 0x00004000 /* true if ESR14 is valid */
-#define ESFR1_ESR15 0x00008000 /* true if ESR15 is valid */
-
-/*
- * MSR - Media Status Register
- */
-#define MSR0_AOVF 0x00000001 /* overflow exception accrued */
-#define MSRx_OVF 0x00000002 /* overflow exception detected */
-#define MSRx_SIE 0x0000003c /* last SIMD instruction exception detected */
-#define MSRx_SIE_NONE 0x00000000 /* - none detected */
-#define MSRx_SIE_FRkHI_ACCk 0x00000020 /* - exception at FRkHI or ACCk */
-#define MSRx_SIE_FRkLO_ACCk1 0x00000010 /* - exception at FRkLO or ACCk+1 */
-#define MSRx_SIE_FRk1HI_ACCk2 0x00000008 /* - exception at FRk+1HI or ACCk+2 */
-#define MSRx_SIE_FRk1LO_ACCk3 0x00000004 /* - exception at FRk+1LO or ACCk+3 */
-#define MSR0_MTT 0x00007000 /* type of last media trap detected */
-#define MSR0_MTT_NONE 0x00000000 /* - none detected */
-#define MSR0_MTT_OVERFLOW 0x00001000 /* - overflow detected */
-#define MSR0_HI 0x00c00000 /* hardware implementation */
-#define MSR0_HI_ROUNDING 0x00000000 /* - rounding mode */
-#define MSR0_HI_NONROUNDING 0x00c00000 /* - non-rounding mode */
-#define MSR0_EMCI 0x01000000 /* enable media custom instructions */
-#define MSR0_SRDAV 0x10000000 /* select rounding mode of MAVEH */
-#define MSR0_SRDAV_RDAV 0x00000000 /* - controlled by MSR.RDAV */
-#define MSR0_SRDAV_RD 0x10000000 /* - controlled by MSR.RD */
-#define MSR0_RDAV 0x20000000 /* rounding mode of MAVEH */
-#define MSR0_RDAV_NEAREST_MI 0x00000000 /* - round to nearest minus */
-#define MSR0_RDAV_NEAREST_PL 0x20000000 /* - round to nearest plus */
-#define MSR0_RD 0xc0000000 /* rounding mode */
-#define MSR0_RD_NEAREST 0x00000000 /* - nearest */
-#define MSR0_RD_ZERO 0x40000000 /* - zero */
-#define MSR0_RD_POS_INF 0x80000000 /* - postive infinity */
-#define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */
-
-/*
- * IAMPR0-7 - Instruction Address Mapping Register
- * DAMPR0-7 - Data Address Mapping Register
- */
-#define xAMPRx_V 0x00000001 /* register content validity indicator */
-#define DAMPRx_WP 0x00000002 /* write protect */
-#define DAMPRx_WP_RW 0x00000000 /* - read/write */
-#define DAMPRx_WP_RO 0x00000002 /* - read-only */
-#define xAMPRx_C 0x00000004 /* cached/uncached */
-#define xAMPRx_C_CACHED 0x00000000 /* - cached */
-#define xAMPRx_C_UNCACHED 0x00000004 /* - uncached */
-#define xAMPRx_S 0x00000008 /* supervisor only */
-#define xAMPRx_S_USER 0x00000000 /* - userspace can access */
-#define xAMPRx_S_KERNEL 0x00000008 /* - kernel only */
-#define xAMPRx_SS 0x000000f0 /* segment size */
-#define xAMPRx_SS_16Kb 0x00000000 /* - 16 kilobytes */
-#define xAMPRx_SS_64Kb 0x00000010 /* - 64 kilobytes */
-#define xAMPRx_SS_256Kb 0x00000020 /* - 256 kilobytes */
-#define xAMPRx_SS_1Mb 0x00000030 /* - 1 megabyte */
-#define xAMPRx_SS_2Mb 0x00000040 /* - 2 megabytes */
-#define xAMPRx_SS_4Mb 0x00000050 /* - 4 megabytes */
-#define xAMPRx_SS_8Mb 0x00000060 /* - 8 megabytes */
-#define xAMPRx_SS_16Mb 0x00000070 /* - 16 megabytes */
-#define xAMPRx_SS_32Mb 0x00000080 /* - 32 megabytes */
-#define xAMPRx_SS_64Mb 0x00000090 /* - 64 megabytes */
-#define xAMPRx_SS_128Mb 0x000000a0 /* - 128 megabytes */
-#define xAMPRx_SS_256Mb 0x000000b0 /* - 256 megabytes */
-#define xAMPRx_SS_512Mb 0x000000c0 /* - 512 megabytes */
-#define xAMPRx_RESERVED8 0x00000100 /* reserved bit */
-#define xAMPRx_NG 0x00000200 /* non-global */
-#define xAMPRx_L 0x00000400 /* locked */
-#define xAMPRx_M 0x00000800 /* modified */
-#define xAMPRx_D 0x00001000 /* DAT entry */
-#define xAMPRx_RESERVED13 0x00002000 /* reserved bit */
-#define xAMPRx_PPFN 0xfff00000 /* physical page frame number */
-
-#define xAMPRx_V_BIT 0
-#define DAMPRx_WP_BIT 1
-#define xAMPRx_C_BIT 2
-#define xAMPRx_S_BIT 3
-#define xAMPRx_RESERVED8_BIT 8
-#define xAMPRx_NG_BIT 9
-#define xAMPRx_L_BIT 10
-#define xAMPRx_M_BIT 11
-#define xAMPRx_D_BIT 12
-#define xAMPRx_RESERVED13_BIT 13
-
-#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; })
-#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; })
-
-#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; })
-#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; })
-
-#define __set_IAMPR(R,V) do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0)
-#define __set_DAMPR(R,V) do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0)
-
-#define __set_IAMLR(R,V) do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0)
-#define __set_DAMLR(R,V) do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0)
-
-#define save_dampr(R, _dampr) \
-do { \
- asm volatile("movsg dampr"R",%0" : "=r"(_dampr)); \
-} while(0)
-
-#define restore_dampr(R, _dampr) \
-do { \
- asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \
-} while(0)
-
-/*
- * AMCR - Address Mapping Control Register
- */
-#define AMCR_IAMRN 0x000000ff /* quantity of IAMPR registers */
-#define AMCR_DAMRN 0x0000ff00 /* quantity of DAMPR registers */
-
-/*
- * TTBR - Address Translation Table Base Register
- */
-#define __get_TTBR() ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; })
-
-/*
- * TPXR - TLB Probe Extend Register
- */
-#define TPXR_E 0x00000001
-#define TPXR_LMAX_SHIFT 20
-#define TPXR_LMAX_SMASK 0xf
-#define TPXR_WMAX_SHIFT 24
-#define TPXR_WMAX_SMASK 0xf
-#define TPXR_WAY_SHIFT 28
-#define TPXR_WAY_SMASK 0xf
-
-/*
- * DCR - Debug Control Register
- */
-#define DCR_IBCE3 0x00000001 /* break on conditional insn pointed to by IBAR3 */
-#define DCR_IBE3 0x00000002 /* break on insn pointed to by IBAR3 */
-#define DCR_IBCE1 0x00000004 /* break on conditional insn pointed to by IBAR2 */
-#define DCR_IBE1 0x00000008 /* break on insn pointed to by IBAR2 */
-#define DCR_IBCE2 0x00000010 /* break on conditional insn pointed to by IBAR1 */
-#define DCR_IBE2 0x00000020 /* break on insn pointed to by IBAR1 */
-#define DCR_IBCE0 0x00000040 /* break on conditional insn pointed to by IBAR0 */
-#define DCR_IBE0 0x00000080 /* break on insn pointed to by IBAR0 */
-
-#define DCR_DDBE1 0x00004000 /* use DBDR1x when checking DBAR1 */
-#define DCR_DWBE1 0x00008000 /* break on store to address in DBAR1/DBMR1x */
-#define DCR_DRBE1 0x00010000 /* break on load from address in DBAR1/DBMR1x */
-#define DCR_DDBE0 0x00020000 /* use DBDR0x when checking DBAR0 */
-#define DCR_DWBE0 0x00040000 /* break on store to address in DBAR0/DBMR0x */
-#define DCR_DRBE0 0x00080000 /* break on load from address in DBAR0/DBMR0x */
-
-#define DCR_EIM 0x0c000000 /* external interrupt disable */
-#define DCR_IBM 0x10000000 /* instruction break disable */
-#define DCR_SE 0x20000000 /* single step enable */
-#define DCR_EBE 0x40000000 /* exception break enable */
-
-/*
- * BRR - Break Interrupt Request Register
- */
-#define BRR_ST 0x00000001 /* single-step detected */
-#define BRR_SB 0x00000002 /* break instruction detected */
-#define BRR_BB 0x00000004 /* branch with hint detected */
-#define BRR_CBB 0x00000008 /* branch to LR detected */
-#define BRR_IBx 0x000000f0 /* hardware breakpoint detected */
-#define BRR_DBx 0x00000f00 /* hardware watchpoint detected */
-#define BRR_DBNEx 0x0000f000 /* ? */
-#define BRR_EBTT 0x00ff0000 /* trap type of exception break */
-#define BRR_TB 0x10000000 /* external break request detected */
-#define BRR_CB 0x20000000 /* ICE break command detected */
-#define BRR_EB 0x40000000 /* exception break detected */
-
-/*
- * BPSR - Break PSR Save Register
- */
-#define BPSR_BET 0x00000001 /* former PSR.ET */
-#define BPSR_BS 0x00001000 /* former PSR.S */
-
-#endif /* _ASM_SPR_REGS_H */
+++ /dev/null
-#ifndef _ASM_STAT_H
-#define _ASM_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-/* This matches struct stat in uClibc/glibc. */
-struct stat {
- unsigned char __pad1[6];
- unsigned short st_dev;
-
- unsigned long __pad2;
- unsigned long st_ino;
-
- unsigned short __pad3;
- unsigned short st_mode;
- unsigned short __pad4;
- unsigned short st_nlink;
-
- unsigned short __pad5;
- unsigned short st_uid;
- unsigned short __pad6;
- unsigned short st_gid;
-
- unsigned char __pad7[6];
- unsigned short st_rdev;
-
- unsigned long __pad8;
- unsigned long st_size;
-
- unsigned long __pad9; /* align 64-bit st_blocks to 2-word */
- unsigned long st_blksize;
-
- unsigned long __pad10; /* future possible st_blocks high bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long __unused1;
- unsigned long st_atime;
-
- unsigned long __unused2;
- unsigned long st_mtime;
-
- unsigned long __unused3;
- unsigned long st_ctime;
-
- unsigned long long __unused4;
-};
-
-/* This matches struct stat64 in uClibc/glibc. The layout is exactly
- the same as that of struct stat above, with 64-bit types taking up
- space that was formerly used by padding. stat syscalls are still
- different from stat64, though, in that the former tests for
- overflow. */
-struct stat64 {
- unsigned char __pad1[6];
- unsigned short st_dev;
-
- unsigned long long st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned char __pad2[6];
- unsigned short st_rdev;
-
- long long st_size;
-
- unsigned long __pad3; /* align 64-bit st_blocks to 2-word */
- unsigned long st_blksize;
-
- unsigned long __pad4; /* future possible st_blocks high bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-
- unsigned long st_atime_nsec;
- unsigned long st_atime;
-
- unsigned int st_mtime_nsec;
- unsigned long st_mtime;
-
- unsigned long st_ctime_nsec;
- unsigned long st_ctime;
-
- unsigned long long __unused4;
-};
-
-#endif /* _ASM_STAT_H */
+++ /dev/null
-#ifndef _ASM_STATFS_H
-#define _ASM_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _ASM_STATFS_H */
-
+++ /dev/null
-/* string.h: FRV string handling
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_STRING_H_
-#define _ASM_STRING_H_
-
-#ifdef __KERNEL__ /* only set these up for kernel code */
-
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-
-extern void *memset(void *, int, __kernel_size_t);
-extern void *memcpy(void *, const void *, __kernel_size_t);
-
-#else /* KERNEL */
-
-/*
- * let user libraries deal with these,
- * IMHO the kernel has no place defining these functions for user apps
- */
-
-#define __HAVE_ARCH_STRCPY 1
-#define __HAVE_ARCH_STRNCPY 1
-#define __HAVE_ARCH_STRCAT 1
-#define __HAVE_ARCH_STRNCAT 1
-#define __HAVE_ARCH_STRCMP 1
-#define __HAVE_ARCH_STRNCMP 1
-#define __HAVE_ARCH_STRNICMP 1
-#define __HAVE_ARCH_STRCHR 1
-#define __HAVE_ARCH_STRRCHR 1
-#define __HAVE_ARCH_STRSTR 1
-#define __HAVE_ARCH_STRLEN 1
-#define __HAVE_ARCH_STRNLEN 1
-#define __HAVE_ARCH_MEMSET 1
-#define __HAVE_ARCH_MEMCPY 1
-#define __HAVE_ARCH_MEMMOVE 1
-#define __HAVE_ARCH_MEMSCAN 1
-#define __HAVE_ARCH_MEMCMP 1
-#define __HAVE_ARCH_MEMCHR 1
-#define __HAVE_ARCH_STRTOK 1
-
-#endif /* KERNEL */
-#endif /* _ASM_STRING_H_ */
+++ /dev/null
-/* suspend.h: suspension stuff
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SUSPEND_H
-#define _ASM_SUSPEND_H
-
-static inline int arch_prepare_suspend(void)
-{
- return 0;
-}
-
-#endif /* _ASM_SUSPEND_H */
+++ /dev/null
-#ifndef _ASM_SWAB_H
-#define _ASM_SWAB_H
-
-#include <linux/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_SWAB_H */
+++ /dev/null
-/* system.h: FR-V CPU control definitions
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_SYSTEM_H
-#define _ASM_SYSTEM_H
-
-#include <linux/types.h>
-#include <linux/linkage.h>
-#include <linux/kernel.h>
-
-struct thread_struct;
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.
- * The `mb' is to tell GCC not to cache `current' across this call.
- */
-extern asmlinkage
-struct task_struct *__switch_to(struct thread_struct *prev_thread,
- struct thread_struct *next_thread,
- struct task_struct *prev);
-
-#define switch_to(prev, next, last) \
-do { \
- (prev)->thread.sched_lr = \
- (unsigned long) __builtin_return_address(0); \
- (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
- mb(); \
-} while(0)
-
-/*
- * interrupt flag manipulation
- * - use virtual interrupt management since touching the PSR is slow
- * - ICC2.Z: T if interrupts virtually disabled
- * - ICC2.C: F if interrupts really disabled
- * - if Z==1 upon interrupt:
- * - C is set to 0
- * - interrupts are really disabled
- * - entry.S returns immediately
- * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts
- * - if taken, the trap:
- * - sets ICC2.C
- * - enables interrupts
- */
-#define local_irq_disable() \
-do { \
- /* set Z flag, but don't change the C flag */ \
- asm volatile(" andcc gr0,gr0,gr0,icc2 \n" \
- : \
- : \
- : "memory", "icc2" \
- ); \
-} while(0)
-
-#define local_irq_enable() \
-do { \
- /* clear Z flag and then test the C flag */ \
- asm volatile(" oricc gr0,#1,gr0,icc2 \n" \
- " tihi icc2,gr0,#2 \n" \
- : \
- : \
- : "memory", "icc2" \
- ); \
-} while(0)
-
-#define local_save_flags(flags) \
-do { \
- typecheck(unsigned long, flags); \
- asm volatile("movsg ccr,%0" \
- : "=r"(flags) \
- : \
- : "memory"); \
- \
- /* shift ICC2.Z to bit 0 */ \
- flags >>= 26; \
- \
- /* make flags 1 if interrupts disabled, 0 otherwise */ \
- flags &= 1UL; \
-} while(0)
-
-#define irqs_disabled() \
- ({unsigned long flags; local_save_flags(flags); !!flags; })
-
-#define local_irq_save(flags) \
-do { \
- typecheck(unsigned long, flags); \
- local_save_flags(flags); \
- local_irq_disable(); \
-} while(0)
-
-#define local_irq_restore(flags) \
-do { \
- typecheck(unsigned long, flags); \
- \
- /* load the Z flag by turning 1 if disabled into 0 if disabled \
- * and thus setting the Z flag but not the C flag */ \
- asm volatile(" xoricc %0,#1,gr0,icc2 \n" \
- /* then test Z=0 and C=0 */ \
- " tihi icc2,gr0,#2 \n" \
- : \
- : "r"(flags) \
- : "memory", "icc2" \
- ); \
- \
-} while(0)
-
-/*
- * real interrupt flag manipulation
- */
-#define __local_irq_disable() \
-do { \
- unsigned long psr; \
- asm volatile(" movsg psr,%0 \n" \
- " andi %0,%2,%0 \n" \
- " ori %0,%1,%0 \n" \
- " movgs %0,psr \n" \
- : "=r"(psr) \
- : "i" (PSR_PIL_14), "i" (~PSR_PIL) \
- : "memory"); \
-} while(0)
-
-#define __local_irq_enable() \
-do { \
- unsigned long psr; \
- asm volatile(" movsg psr,%0 \n" \
- " andi %0,%1,%0 \n" \
- " movgs %0,psr \n" \
- : "=r"(psr) \
- : "i" (~PSR_PIL) \
- : "memory"); \
-} while(0)
-
-#define __local_save_flags(flags) \
-do { \
- typecheck(unsigned long, flags); \
- asm("movsg psr,%0" \
- : "=r"(flags) \
- : \
- : "memory"); \
-} while(0)
-
-#define __local_irq_save(flags) \
-do { \
- unsigned long npsr; \
- typecheck(unsigned long, flags); \
- asm volatile(" movsg psr,%0 \n" \
- " andi %0,%3,%1 \n" \
- " ori %1,%2,%1 \n" \
- " movgs %1,psr \n" \
- : "=r"(flags), "=r"(npsr) \
- : "i" (PSR_PIL_14), "i" (~PSR_PIL) \
- : "memory"); \
-} while(0)
-
-#define __local_irq_restore(flags) \
-do { \
- typecheck(unsigned long, flags); \
- asm volatile(" movgs %0,psr \n" \
- : \
- : "r" (flags) \
- : "memory"); \
-} while(0)
-
-#define __irqs_disabled() \
- ((__get_PSR() & PSR_PIL) >= PSR_PIL_14)
-
-/*
- * Force strict CPU ordering.
- */
-#define nop() asm volatile ("nop"::)
-#define mb() asm volatile ("membar" : : :"memory")
-#define rmb() asm volatile ("membar" : : :"memory")
-#define wmb() asm volatile ("membar" : : :"memory")
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) \
- do { xchg(&var, (value)); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do {} while(0)
-#define set_mb(var, value) \
- do { var = (value); barrier(); } while (0)
-#endif
-
-extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2)));
-extern void free_initmem(void);
-
-#define arch_align_stack(x) (x)
-
-/*****************************************************************************/
-/*
- * compare and conditionally exchange value with memory
- * - if (*ptr == test) then orig = *ptr; *ptr = test;
- * - if (*ptr != test) then orig = *ptr;
- */
-#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
-
-#define cmpxchg(ptr, test, new) \
-({ \
- __typeof__(ptr) __xg_ptr = (ptr); \
- __typeof__(*(ptr)) __xg_orig, __xg_tmp; \
- __typeof__(*(ptr)) __xg_test = (test); \
- __typeof__(*(ptr)) __xg_new = (new); \
- \
- switch (sizeof(__xg_orig)) { \
- case 4: \
- asm volatile( \
- "0: \n" \
- " orcc gr0,gr0,gr0,icc3 \n" \
- " ckeq icc3,cc7 \n" \
- " ld.p %M0,%1 \n" \
- " orcr cc7,cc7,cc3 \n" \
- " sub%I4cc %1,%4,%2,icc0 \n" \
- " bne icc0,#0,1f \n" \
- " cst.p %3,%M0 ,cc3,#1 \n" \
- " corcc gr29,gr29,gr0 ,cc3,#1 \n" \
- " beq icc3,#0,0b \n" \
- "1: \n" \
- : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp) \
- : "r"(__xg_new), "NPr"(__xg_test) \
- : "memory", "cc7", "cc3", "icc3", "icc0" \
- ); \
- break; \
- \
- default: \
- __xg_orig = (__typeof__(__xg_orig))0; \
- asm volatile("break"); \
- break; \
- } \
- \
- __xg_orig; \
-})
-
-#else
-
-extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new);
-
-#define cmpxchg(ptr, test, new) \
-({ \
- __typeof__(ptr) __xg_ptr = (ptr); \
- __typeof__(*(ptr)) __xg_orig; \
- __typeof__(*(ptr)) __xg_test = (test); \
- __typeof__(*(ptr)) __xg_new = (new); \
- \
- switch (sizeof(__xg_orig)) { \
- case 4: __xg_orig = (__force __typeof__(*ptr)) \
- __cmpxchg_32((__force uint32_t *)__xg_ptr, \
- (__force uint32_t)__xg_test, \
- (__force uint32_t)__xg_new); break; \
- default: \
- __xg_orig = (__typeof__(__xg_orig))0; \
- asm volatile("break"); \
- break; \
- } \
- \
- __xg_orig; \
-})
-
-#endif
-
-#include <asm-generic/cmpxchg-local.h>
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
- unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return cmpxchg((unsigned long *)ptr, old, new);
- default:
- return __cmpxchg_local_generic(ptr, old, new, size);
- }
-
- return old;
-}
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#endif /* _ASM_SYSTEM_H */
+++ /dev/null
-#ifndef _ASM_TERMBITS_H__
-#define _ASM_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* Input baud rate */
-#define CTVB 004000000000 /* VisioBraille Terminal flow control */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_TERMBITS_H__ */
-
+++ /dev/null
-#ifndef _ASM_TERMIOS_H
-#define _ASM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-#include <asm-generic/termios.h>
-#endif
-
-#endif /* _ASM_TERMIOS_H */
+++ /dev/null
-/* thread_info.h: description
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * Derived from include/asm-i386/thread_info.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#endif
-
-#define THREAD_SIZE 8192
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-#ifndef __ASSEMBLY__
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- unsigned long status; /* thread-synchronous flags */
- __u32 cpu; /* current CPU */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
-
- mm_segment_t addr_limit; /* thread address space:
- 0-0xBFFFFFFF for user-thead
- 0-0xFFFFFFFF for kernel-thread
- */
- struct restart_block restart_block;
-
- __u8 supervisor_stack[0];
-};
-
-#else /* !__ASSEMBLY__ */
-
-#include <asm/asm-offsets.h>
-
-#endif
-
-#define PREEMPT_ACTIVE 0x10000000
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-/* how to get the thread information struct from C */
-register struct thread_info *__current_thread_info asm("gr15");
-
-#define current_thread_info() ({ __current_thread_info; })
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) \
- ({ \
- struct thread_info *ret; \
- \
- ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \
- \
- ret; \
- })
-#else
-#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-
-#define free_thread_info(info) kfree(info)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
-#define TIF_IRET 4 /* return with iret */
-#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
-#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE 17 /* OOM killer killed process */
-#define TIF_FREEZE 18 /* freezing for suspend */
-
-#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
-#define _TIF_IRET (1 << TIF_IRET)
-#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1 << TIF_FREEZE)
-
-#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPM 0x0001 /* FPU/Media was used by this task this quantum (SMP) */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
+++ /dev/null
-/* timer-regs.h: hardware timer register definitions
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_TIMER_REGS_H
-#define _ASM_TIMER_REGS_H
-
-#include <asm/sections.h>
-
-extern unsigned long __nongprelbss __clkin_clock_speed_HZ;
-extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
-extern unsigned long __nongprelbss __res_bus_clock_speed_HZ;
-extern unsigned long __nongprelbss __sdram_clock_speed_HZ;
-extern unsigned long __nongprelbss __core_bus_clock_speed_HZ;
-extern unsigned long __nongprelbss __core_clock_speed_HZ;
-extern unsigned long __nongprelbss __dsu_clock_speed_HZ;
-extern unsigned long __nongprelbss __serial_clock_speed_HZ;
-
-#define __get_CLKC() ({ *(volatile unsigned long *)(0xfeff9a00); })
-
-static inline void __set_CLKC(unsigned long v)
-{
- int tmp;
-
- asm volatile(" st%I0.p %2,%M0 \n"
- " setlos %3,%1 \n"
- " membar \n"
- "0: \n"
- " subicc %1,#1,%1,icc0 \n"
- " bnc icc0,#1,0b \n"
- : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp)
- : "r"(v), "i"(256)
- : "icc0");
-}
-
-#define __get_TCTR() ({ *(volatile unsigned long *)(0xfeff9418); })
-#define __get_TPRV() ({ *(volatile unsigned long *)(0xfeff9420); })
-#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); })
-#define __get_TCSR(T) ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); })
-#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); })
-
-#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; })
-
-#define __set_TCTR(V) do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0)
-#define __set_TPRV(V) do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0)
-#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0)
-#define __set_TCSR(T,V) \
-do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0)
-
-#define __set_TxCKSL(T,V) \
-do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0)
-
-#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24)
-#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V)))
-
-/* clock control register */
-#define CLKC_CMODE 0x0f000000
-#define CLKC_SLPL 0x000f0000
-#define CLKC_P0 0x00000100
-#define CLKC_CM 0x00000003
-
-#define CLKC_CMODE_s 24
-
-/* timer control register - non-readback mode */
-#define TCTR_MODE_0 0x00000000
-#define TCTR_MODE_2 0x04000000
-#define TCTR_MODE_4 0x08000000
-#define TCTR_MODE_5 0x0a000000
-#define TCTR_RL_LATCH 0x00000000
-#define TCTR_RL_RW_LOW8 0x10000000
-#define TCTR_RL_RW_HIGH8 0x20000000
-#define TCTR_RL_RW_LH8 0x30000000
-#define TCTR_SC_CTR0 0x00000000
-#define TCTR_SC_CTR1 0x40000000
-#define TCTR_SC_CTR2 0x80000000
-
-/* timer control register - readback mode */
-#define TCTR_CNT0 0x02000000
-#define TCTR_CNT1 0x04000000
-#define TCTR_CNT2 0x08000000
-#define TCTR_NSTATUS 0x10000000
-#define TCTR_NCOUNT 0x20000000
-#define TCTR_SC_READBACK 0xc0000000
-
-/* timer control status registers - non-readback mode */
-#define TCSRx_DATA 0xff000000
-
-/* timer control status registers - readback mode */
-#define TCSRx_OUTPUT 0x80000000
-#define TCSRx_NULLCOUNT 0x40000000
-#define TCSRx_RL 0x30000000
-#define TCSRx_MODE 0x07000000
-
-/* timer clock select registers */
-#define TxCKSL_SELECT 0x0f000000
-#define __TxCKSL_SELECT(X) ((X) << 24)
-#define TxCKSL_EIGHT 0xf0000000
-
-#endif /* _ASM_TIMER_REGS_H */
+++ /dev/null
-/* timex.h: FR-V architecture timex specifications
- */
-#ifndef _ASM_TIMEX_H
-#define _ASM_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#define vxtime_lock() do {} while (0)
-#define vxtime_unlock() do {} while (0)
-
-#endif
-
+++ /dev/null
-#ifndef _ASM_TLB_H
-#define _ASM_TLB_H
-
-#include <asm/tlbflush.h>
-
-#ifdef CONFIG_MMU
-extern void check_pgt_cache(void);
-#else
-#define check_pgt_cache() do {} while(0)
-#endif
-
-/*
- * we don't need any special per-pte or per-vma handling...
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it fills up
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-#endif /* _ASM_TLB_H */
-
+++ /dev/null
-/* tlbflush.h: TLB flushing functions
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_TLBFLUSH_H
-#define _ASM_TLBFLUSH_H
-
-#include <linux/mm.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_MMU
-
-#ifndef __ASSEMBLY__
-extern void asmlinkage __flush_tlb_all(void);
-extern void asmlinkage __flush_tlb_mm(unsigned long contextid);
-extern void asmlinkage __flush_tlb_page(unsigned long contextid, unsigned long start);
-extern void asmlinkage __flush_tlb_range(unsigned long contextid,
- unsigned long start, unsigned long end);
-#endif /* !__ASSEMBLY__ */
-
-#define flush_tlb_all() \
-do { \
- preempt_disable(); \
- __flush_tlb_all(); \
- preempt_enable(); \
-} while(0)
-
-#define flush_tlb_mm(mm) \
-do { \
- preempt_disable(); \
- __flush_tlb_mm((mm)->context.id); \
- preempt_enable(); \
-} while(0)
-
-#define flush_tlb_range(vma,start,end) \
-do { \
- preempt_disable(); \
- __flush_tlb_range((vma)->vm_mm->context.id, start, end); \
- preempt_enable(); \
-} while(0)
-
-#define flush_tlb_page(vma,addr) \
-do { \
- preempt_disable(); \
- __flush_tlb_page((vma)->vm_mm->context.id, addr); \
- preempt_enable(); \
-} while(0)
-
-
-#define __flush_tlb_global() flush_tlb_all()
-#define flush_tlb() flush_tlb_all()
-#define flush_tlb_kernel_range(start, end) flush_tlb_all()
-
-#else
-
-#define flush_tlb() BUG()
-#define flush_tlb_all() BUG()
-#define flush_tlb_mm(mm) BUG()
-#define flush_tlb_page(vma,addr) BUG()
-#define flush_tlb_range(mm,start,end) BUG()
-#define flush_tlb_kernel_range(start, end) BUG()
-
-#endif
-
-
-#endif /* _ASM_TLBFLUSH_H */
+++ /dev/null
-#ifndef _ASM_TOPOLOGY_H
-#define _ASM_TOPOLOGY_H
-
-#ifdef CONFIG_NUMA
-
-#error NUMA not supported yet
-
-#endif /* CONFIG_NUMA */
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_TOPOLOGY_H */
+++ /dev/null
-/* types.h: FRV types
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_TYPES_H
-#define _ASM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_TYPES_H */
+++ /dev/null
-/* uaccess.h: userspace accessor functions
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_UACCESS_H
-#define _ASM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/segment.h>
-#include <asm/sections.h>
-
-#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */
-
-#define __ptr(x) ((unsigned long __force *)(x))
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-#define __addr_ok(addr) ((unsigned long)(addr) < get_addr_limit())
-
-/*
- * check that a range of addresses falls within the current address limit
- */
-static inline int ___range_ok(unsigned long addr, unsigned long size)
-{
-#ifdef CONFIG_MMU
- int flag = -EFAULT, tmp;
-
- asm volatile (
- " addcc %3,%2,%1,icc0 \n" /* set C-flag if addr+size>4GB */
- " subcc.p %1,%4,gr0,icc1 \n" /* jump if addr+size>limit */
- " bc icc0,#0,0f \n"
- " bhi icc1,#0,0f \n"
- " setlos #0,%0 \n" /* mark okay */
- "0: \n"
- : "=r"(flag), "=&r"(tmp)
- : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag)
- );
-
- return flag;
-
-#else
-
- if (addr < memory_start ||
- addr > memory_end ||
- size > memory_end - memory_start ||
- addr + size > memory_end)
- return -EFAULT;
-
- return 0;
-#endif
-}
-
-#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size))
-
-#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0)
-#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-#define __put_user(x, ptr) \
-({ \
- int __pu_err = 0; \
- \
- typeof(*(ptr)) __pu_val = (x); \
- __chk_user_ptr(ptr); \
- \
- switch (sizeof (*(ptr))) { \
- case 1: \
- __put_user_asm(__pu_err, __pu_val, ptr, "b", "r"); \
- break; \
- case 2: \
- __put_user_asm(__pu_err, __pu_val, ptr, "h", "r"); \
- break; \
- case 4: \
- __put_user_asm(__pu_err, __pu_val, ptr, "", "r"); \
- break; \
- case 8: \
- __put_user_asm(__pu_err, __pu_val, ptr, "d", "e"); \
- break; \
- default: \
- __pu_err = __put_user_bad(); \
- break; \
- } \
- __pu_err; \
-})
-
-#define put_user(x, ptr) \
-({ \
- typeof(*(ptr)) __user *_p = (ptr); \
- int _e; \
- \
- _e = __range_ok(_p, sizeof(*_p)); \
- if (_e == 0) \
- _e = __put_user((x), _p); \
- _e; \
-})
-
-extern int __put_user_bad(void);
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-
-#ifdef CONFIG_MMU
-
-#define __put_user_asm(err,x,ptr,dsize,constraint) \
-do { \
- asm volatile("1: st"dsize"%I1 %2,%M1 \n" \
- "2: \n" \
- ".subsection 2 \n" \
- "3: setlos %3,%0 \n" \
- " bra 2b \n" \
- ".previous \n" \
- ".section __ex_table,\"a\" \n" \
- " .balign 8 \n" \
- " .long 1b,3b \n" \
- ".previous" \
- : "=r" (err) \
- : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err) \
- : "memory"); \
-} while (0)
-
-#else
-
-#define __put_user_asm(err,x,ptr,bwl,con) \
-do { \
- asm(" st"bwl"%I0 %1,%M0 \n" \
- " membar \n" \
- : \
- : "m" (*__ptr(ptr)), con (x) \
- : "memory"); \
-} while (0)
-
-#endif
-
-/*****************************************************************************/
-/*
- *
- */
-#define __get_user(x, ptr) \
-({ \
- int __gu_err = 0; \
- __chk_user_ptr(ptr); \
- \
- switch (sizeof(*(ptr))) { \
- case 1: { \
- unsigned char __gu_val; \
- __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r"); \
- (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
- break; \
- } \
- case 2: { \
- unsigned short __gu_val; \
- __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r"); \
- (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
- break; \
- } \
- case 4: { \
- unsigned int __gu_val; \
- __get_user_asm(__gu_err, __gu_val, ptr, "", "=r"); \
- (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
- break; \
- } \
- case 8: { \
- unsigned long long __gu_val; \
- __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e"); \
- (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \
- break; \
- } \
- default: \
- __gu_err = __get_user_bad(); \
- break; \
- } \
- __gu_err; \
-})
-
-#define get_user(x, ptr) \
-({ \
- const typeof(*(ptr)) __user *_p = (ptr);\
- int _e; \
- \
- _e = __range_ok(_p, sizeof(*_p)); \
- if (likely(_e == 0)) \
- _e = __get_user((x), _p); \
- else \
- (x) = (typeof(x)) 0; \
- _e; \
-})
-
-extern int __get_user_bad(void);
-
-#ifdef CONFIG_MMU
-
-#define __get_user_asm(err,x,ptr,dtype,constraint) \
-do { \
- asm("1: ld"dtype"%I2 %M2,%1 \n" \
- "2: \n" \
- ".subsection 2 \n" \
- "3: setlos %3,%0 \n" \
- " setlos #0,%1 \n" \
- " bra 2b \n" \
- ".previous \n" \
- ".section __ex_table,\"a\" \n" \
- " .balign 8 \n" \
- " .long 1b,3b \n" \
- ".previous" \
- : "=r" (err), constraint (x) \
- : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \
- ); \
-} while(0)
-
-#else
-
-#define __get_user_asm(err,x,ptr,bwl,con) \
- asm(" ld"bwl"%I1 %M1,%0 \n" \
- " membar \n" \
- : con(x) \
- : "m" (*__ptr(ptr)))
-
-#endif
-
-/*****************************************************************************/
-/*
- *
- */
-#define ____force(x) (__force void *)(void __user *)(x)
-#ifdef CONFIG_MMU
-extern long __memset_user(void *dst, unsigned long count);
-extern long __memcpy_user(void *dst, const void *src, unsigned long count);
-
-#define clear_user(dst,count) __memset_user(____force(dst), (count))
-#define __copy_from_user_inatomic(to, from, n) __memcpy_user((to), ____force(from), (n))
-#define __copy_to_user_inatomic(to, from, n) __memcpy_user(____force(to), (from), (n))
-
-#else
-
-#define clear_user(dst,count) (memset(____force(dst), 0, (count)), 0)
-#define __copy_from_user_inatomic(to, from, n) (memcpy((to), ____force(from), (n)), 0)
-#define __copy_to_user_inatomic(to, from, n) (memcpy(____force(to), (from), (n)), 0)
-
-#endif
-
-#define __clear_user clear_user
-
-static inline unsigned long __must_check
-__copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- might_sleep();
- return __copy_to_user_inatomic(to, from, n);
-}
-
-static inline unsigned long
-__copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- might_sleep();
- return __copy_from_user_inatomic(to, from, n);
-}
-
-static inline long copy_from_user(void *to, const void __user *from, unsigned long n)
-{
- unsigned long ret = n;
-
- if (likely(__access_ok(from, n)))
- ret = __copy_from_user(to, from, n);
-
- if (unlikely(ret != 0))
- memset(to + (n - ret), 0, ret);
-
- return ret;
-}
-
-static inline long copy_to_user(void __user *to, const void *from, unsigned long n)
-{
- return likely(__access_ok(to, n)) ? __copy_to_user(to, from, n) : n;
-}
-
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
-extern long strnlen_user(const char __user *src, long count);
-
-#define strlen_user(str) strnlen_user(str, 32767)
-
-extern unsigned long search_exception_table(unsigned long addr);
-
-#endif /* _ASM_UACCESS_H */
+++ /dev/null
-#ifndef _ASM_UCONTEXT_H
-#define _ASM_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif
+++ /dev/null
-/* unaligned.h: unaligned access handler
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNALIGNED_H
-#define _ASM_UNALIGNED_H
-
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/be_struct.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_be
-#define put_unaligned __put_unaligned_be
-
-#endif /* _ASM_UNALIGNED_H */
+++ /dev/null
-#ifndef _ASM_UNISTD_H_
-#define _ASM_UNISTD_H_
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-// #define __NR_oldolduname /* 59 */ obsolete
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-// #define __NR_mmap 90 /* obsolete - not implemented */
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-// #define __NR_profil /* 98 */ obsolete
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-// #define __NR_ioperm /* 101 */ not supported
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-// #define __NR_olduname /* 109 */ obsolete
-// #define __NR_iopl /* 110 */ not supported
-#define __NR_vhangup 111
-// #define __NR_idle /* 112 */ Obsolete
-// #define __NR_vm86old /* 113 */ not supported
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-// #define __NR_modify_ldt /* 123 */ not supported
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-// #define __NR_vm86 /* 166 */ not supported
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_chown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-
-#define __NR_getdents64 220
-#define __NR_fcntl64 221
-#define __NR_security 223 /* syscall for security modules */
-#define __NR_gettid 224
-#define __NR_readahead 225
-#define __NR_setxattr 226
-#define __NR_lsetxattr 227
-#define __NR_fsetxattr 228
-#define __NR_getxattr 229
-#define __NR_lgetxattr 230
-#define __NR_fgetxattr 231
-#define __NR_listxattr 232
-#define __NR_llistxattr 233
-#define __NR_flistxattr 234
-#define __NR_removexattr 235
-#define __NR_lremovexattr 236
-#define __NR_fremovexattr 237
-#define __NR_tkill 238
-#define __NR_sendfile64 239
-#define __NR_futex 240
-#define __NR_sched_setaffinity 241
-#define __NR_sched_getaffinity 242
-#define __NR_set_thread_area 243
-#define __NR_get_thread_area 244
-#define __NR_io_setup 245
-#define __NR_io_destroy 246
-#define __NR_io_getevents 247
-#define __NR_io_submit 248
-#define __NR_io_cancel 249
-#define __NR_fadvise64 250
-
-#define __NR_exit_group 252
-#define __NR_lookup_dcookie 253
-#define __NR_epoll_create 254
-#define __NR_epoll_ctl 255
-#define __NR_epoll_wait 256
-#define __NR_remap_file_pages 257
-#define __NR_set_tid_address 258
-#define __NR_timer_create 259
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
-#define __NR_statfs64 268
-#define __NR_fstatfs64 269
-#define __NR_tgkill 270
-#define __NR_utimes 271
-#define __NR_fadvise64_64 272
-#define __NR_vserver 273
-#define __NR_mbind 274
-#define __NR_get_mempolicy 275
-#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
-#define __NR_mq_unlink (__NR_mq_open+1)
-#define __NR_mq_timedsend (__NR_mq_open+2)
-#define __NR_mq_timedreceive (__NR_mq_open+3)
-#define __NR_mq_notify (__NR_mq_open+4)
-#define __NR_mq_getsetattr (__NR_mq_open+5)
-#define __NR_kexec_load 283
-#define __NR_waitid 284
-/* #define __NR_sys_setaltroot 285 */
-#define __NR_add_key 286
-#define __NR_request_key 287
-#define __NR_keyctl 288
-#define __NR_ioprio_set 289
-#define __NR_ioprio_get 290
-#define __NR_inotify_init 291
-#define __NR_inotify_add_watch 292
-#define __NR_inotify_rm_watch 293
-#define __NR_migrate_pages 294
-#define __NR_openat 295
-#define __NR_mkdirat 296
-#define __NR_mknodat 297
-#define __NR_fchownat 298
-#define __NR_futimesat 299
-#define __NR_fstatat64 300
-#define __NR_unlinkat 301
-#define __NR_renameat 302
-#define __NR_linkat 303
-#define __NR_symlinkat 304
-#define __NR_readlinkat 305
-#define __NR_fchmodat 306
-#define __NR_faccessat 307
-#define __NR_pselect6 308
-#define __NR_ppoll 309
-#define __NR_unshare 310
-#define __NR_set_robust_list 311
-#define __NR_get_robust_list 312
-#define __NR_splice 313
-#define __NR_sync_file_range 314
-#define __NR_tee 315
-#define __NR_vmsplice 316
-#define __NR_move_pages 317
-#define __NR_getcpu 318
-#define __NR_epoll_pwait 319
-#define __NR_utimensat 320
-#define __NR_signalfd 321
-#define __NR_timerfd_create 322
-#define __NR_eventfd 323
-#define __NR_fallocate 324
-#define __NR_timerfd_settime 325
-#define __NR_timerfd_gettime 326
-#define __NR_signalfd4 327
-#define __NR_eventfd2 328
-#define __NR_epoll_create1 329
-#define __NR_dup3 330
-#define __NR_pipe2 331
-#define __NR_inotify_init1 332
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 333
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-/* #define __ARCH_WANT_OLD_READDIR */
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-/* #define __ARCH_WANT_SYS_GETHOSTNAME */
-#define __ARCH_WANT_SYS_PAUSE
-/* #define __ARCH_WANT_SYS_SGETMASK */
-/* #define __ARCH_WANT_SYS_SIGNAL */
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */
-#define __ARCH_WANT_SYS_OLDUMOUNT
-/* #define __ARCH_WANT_SYS_SIGPENDING */
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_UNISTD_H_ */
+++ /dev/null
-/* user.h: FR-V core file format stuff
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_USER_H
-#define _ASM_USER_H
-
-#include <asm/page.h>
-#include <asm/registers.h>
-
-/* Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the 'trad-core' bfd). There are quite a number of
- * obstacles to being able to view the contents of the floating point
- * registers, and until these are solved you will not be able to view
- * the contents of them. Actually, you can read in the core file and
- * look at the contents of the user struct to find out what the
- * floating point registers contain.
- *
- * The actual file contents are as follows:
- * UPAGE:
- * 1 page consisting of a user struct that tells gdb what is present
- * in the file. Directly after this is a copy of the task_struct,
- * which is currently not used by gdb, but it may come in useful at
- * some point. All of the registers are stored as part of the
- * upage. The upage should always be only one page.
- *
- * DATA:
- * The data area is stored. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any
- * memory that may have been malloced. No attempt is made to
- * determine if a page is demand-zero or if a page is totally
- * unused, we just cover the entire range. All of the addresses are
- * rounded in such a way that an integral number of pages is
- * written.
- *
- * STACK:
- * We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from (esp) to
- * current->start_stack, so we round each of these off in order to
- * be able to write an integer number of pages. The minimum core
- * file size is 3 pages, or 12288 bytes.
- */
-
-/* When the kernel dumps core, it starts by dumping the user struct -
- * this will be used by gdb to figure out where the data and stack segments
- * are within the file, and what virtual addresses to use.
- */
-struct user {
- /* We start with the registers, to mimic the way that "memory" is returned
- * from the ptrace(3,...) function. */
- struct user_context regs;
-
- /* The rest of this junk is to help gdb figure out what goes where */
- unsigned long u_tsize; /* Text segment size (pages). */
- unsigned long u_dsize; /* Data segment size (pages). */
- unsigned long u_ssize; /* Stack segment size (pages). */
- unsigned long start_code; /* Starting virtual address of text. */
- unsigned long start_stack; /* Starting virtual address of stack area.
- * This is actually the bottom of the stack,
- * the top of the stack is always found in the
- * esp register. */
- long int signal; /* Signal that caused the core dump. */
-
- unsigned long magic; /* To uniquely identify a core file */
- char u_comm[32]; /* User command that was responsible */
-};
-
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif
+++ /dev/null
-/* vga.h: VGA register stuff
- *
- * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#ifndef _ASM_VGA_H
-#define _ASM_VGA_H
-
-
-
-#endif /* _ASM_VGA_H */
+++ /dev/null
-/* virtconvert.h: virtual/physical/page address convertion
- *
- * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef _ASM_VIRTCONVERT_H
-#define _ASM_VIRTCONVERT_H
-
-/*
- * Macros used for converting between virtual and physical mappings.
- */
-
-#ifdef __KERNEL__
-
-#include <asm/setup.h>
-
-#ifdef CONFIG_MMU
-
-#define phys_to_virt(vaddr) ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr) - PAGE_OFFSET)
-
-#else
-
-#define phys_to_virt(vaddr) ((void *) (vaddr))
-#define virt_to_phys(vaddr) ((unsigned long) (vaddr))
-
-#endif
-
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
-#define page_to_phys(page) virt_to_phys((void *)__page_address(page))
-
-#endif
-#endif
+++ /dev/null
-#include <asm-generic/xor.h>
#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
#define atomic_long_cmpxchg(l, old, new) \
- (atomic_cmpxchg((atomic64_t *)(l), (old), (new)))
+ (atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
#define atomic_long_xchg(v, new) \
- (atomic_xchg((atomic64_t *)(l), (new)))
+ (atomic64_xchg((atomic64_t *)(l), (new)))
#else /* BITS_PER_LONG == 64 */
*/
#ifndef __WARN
#ifndef __ASSEMBLY__
-extern void warn_slowpath(const char *file, const int line,
+extern void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...) __attribute__((format(printf, 3, 4)));
+extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
#endif
-#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL)
-#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#else
#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0)
#endif
#else /* !CONFIG_BUG */
#ifndef HAVE_ARCH_BUG
-#define BUG()
+#define BUG() do {} while(0)
#endif
#ifndef HAVE_ARCH_BUG_ON
#define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n))
#define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n))
-#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u))
+#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u))
#define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a)
/* Non-atomic variants, ie. preemption disabled and won't be touched
#ifndef _ASM_GENERIC_PERCPU_H_
#define _ASM_GENERIC_PERCPU_H_
+
#include <linux/compiler.h>
#include <linux/threads.h>
-
-/*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
+#include <linux/percpu-defs.h>
#ifdef CONFIG_SMP
#endif /* SMP */
-#ifndef PER_CPU_ATTRIBUTES
-#define PER_CPU_ATTRIBUTES
+#ifndef PER_CPU_BASE_SECTION
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
#endif
-
-#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
- __typeof__(type) per_cpu_var(name)
-
-/*
- * Optional methods for optimized non-lvalue per-cpu variable access.
- *
- * @var can be a percpu variable or a field of it and its size should
- * equal char, int or long. percpu_read() evaluates to a lvalue and
- * all others to void.
- *
- * These operations are guaranteed to be atomic w.r.t. preemption.
- * The generic versions use plain get/put_cpu_var(). Archs are
- * encouraged to implement single-instruction alternatives which don't
- * require preemption protection.
- */
-#ifndef percpu_read
-# define percpu_read(var) \
- ({ \
- typeof(per_cpu_var(var)) __tmp_var__; \
- __tmp_var__ = get_cpu_var(var); \
- put_cpu_var(var); \
- __tmp_var__; \
- })
#endif
-#define __percpu_generic_to_op(var, val, op) \
-do { \
- get_cpu_var(var) op val; \
- put_cpu_var(var); \
-} while (0)
-
-#ifndef percpu_write
-# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =)
-#endif
+#ifdef CONFIG_SMP
-#ifndef percpu_add
-# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=)
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
#endif
+#define PER_CPU_FIRST_SECTION ".first"
-#ifndef percpu_sub
-# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=)
-#endif
+#else
-#ifndef percpu_and
-# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=)
-#endif
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
-#ifndef percpu_or
-# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=)
#endif
-#ifndef percpu_xor
-# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=)
+#ifndef PER_CPU_ATTRIBUTES
+#define PER_CPU_ATTRIBUTES
#endif
#endif /* _ASM_GENERIC_PERCPU_H_ */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */
-#define NSIGTRAP 2
+#define NSIGTRAP 4
/*
* SIGCHLD si_codes
+#include <linux/section-names.h>
+
#ifndef LOAD_OFFSET
#define LOAD_OFFSET 0
#endif
/* .data section */
#define DATA_DATA \
*(.data) \
- *(.data.init.refok) \
*(.ref.data) \
DEV_KEEP(init.data) \
DEV_KEEP(exit.data) \
*(.text.hot) \
*(.text) \
*(.ref.text) \
- *(.text.init.refok) \
- *(.exit.text.refok) \
DEV_KEEP(init.text) \
DEV_KEEP(exit.text) \
CPU_KEEP(init.text) \
#endif
/* Section used for early init (in .S files) */
-#define HEAD_TEXT *(.head.text)
+#define HEAD_TEXT *(HEAD_TEXT_SECTION)
/* init and exit section handling */
#define INIT_DATA \
+++ /dev/null
-#ifndef __H8300_TIMER_H
-#define __H8300_TIMER_H
-
-void h8300_timer_tick(void);
-void h8300_timer_setup(void);
-void h8300_gettod(unsigned int *year, unsigned int *mon, unsigned int *day,
- unsigned int *hour, unsigned int *min, unsigned int *sec);
-
-#define TIMER_FREQ (CONFIG_CPU_CLOCK*10000) /* Timer input freq. */
-
-#define calc_param(cnt, div, rate, limit) \
-do { \
- cnt = TIMER_FREQ / HZ; \
- for (div = 0; div < ARRAY_SIZE(divide_rate); div++) { \
- if (rate[div] == 0) \
- continue; \
- if ((cnt / rate[div]) > limit) \
- break; \
- } \
- if (div == ARRAY_SIZE(divide_rate)) \
- panic("Timer counter overflow"); \
- cnt /= divide_rate[div]; \
-} while(0)
-
-#endif
+++ /dev/null
-include include/asm-generic/Kbuild.asm
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 by Hiroyuki Kondo
- *
- * Defitions for the address spaces of the M32R CPUs.
- */
-#ifndef __ASM_M32R_ADDRSPACE_H
-#define __ASM_M32R_ADDRSPACE_H
-
-/*
- * Memory segments (32bit kernel mode addresses)
- */
-#define KUSEG 0x00000000
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-#define KSEG2 0xc0000000
-#define KSEG3 0xe0000000
-
-#define K0BASE KSEG0
-
-/*
- * Returns the kernel segment base of a given address
- */
-#ifndef __ASSEMBLY__
-#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000)
-#else
-#define KSEGX(a) ((a) & 0xe0000000)
-#endif
-
-/*
- * Returns the physical address of a KSEG0/KSEG1 address
- */
-#ifndef __ASSEMBLY__
-#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
-#else
-#define PHYSADDR(a) ((a) & 0x1fffffff)
-#endif
-
-/*
- * Map an address to a certain kernel segment
- */
-#ifndef __ASSEMBLY__
-#define KSEG0ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG0))
-#define KSEG1ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG1))
-#define KSEG2ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG2))
-#define KSEG3ADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | KSEG3))
-#else
-#define KSEG0ADDR(a) (((a) & 0x1fffffff) | KSEG0)
-#define KSEG1ADDR(a) (((a) & 0x1fffffff) | KSEG1)
-#define KSEG2ADDR(a) (((a) & 0x1fffffff) | KSEG2)
-#define KSEG3ADDR(a) (((a) & 0x1fffffff) | KSEG3)
-#endif
-
-#endif /* __ASM_M32R_ADDRSPACE_H */
+++ /dev/null
-#ifndef _ASM_M32R_ASSEMBLER_H
-#define _ASM_M32R_ASSEMBLER_H
-
-/*
- * linux/asm-m32r/assembler.h
- *
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- *
- * This file contains M32R architecture specific macro definitions.
- */
-
-
-#ifndef __STR
-#ifdef __ASSEMBLY__
-#define __STR(x) x
-#else
-#define __STR(x) #x
-#endif
-#endif /* __STR */
-
-#ifdef CONFIG_SMP
-#define M32R_LOCK __STR(lock)
-#define M32R_UNLOCK __STR(unlock)
-#else
-#define M32R_LOCK __STR(ld)
-#define M32R_UNLOCK __STR(st)
-#endif
-
-#ifdef __ASSEMBLY__
-#undef ENTRY
-#define ENTRY(name) ENTRY_M name
- .macro ENTRY_M name
- .global \name
- ALIGN
-\name:
- .endm
-#endif
-
-
-/**
- * LDIMM - load immediate value
- * STI - enable interruption
- * CLI - disable interruption
- */
-
-#ifdef __ASSEMBLY__
-
-#define LDIMM(reg,x) LDIMM reg x
- .macro LDIMM reg x
- seth \reg, #high(\x)
- or3 \reg, \reg, #low(\x)
- .endm
-
-#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
-#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
- .macro ENABLE_INTERRUPTS reg
- setpsw #0x40 -> nop
- ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
- .endm
-
-#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
- .macro DISABLE_INTERRUPTS reg
- clrpsw #0x40 -> nop
- ; WORKAROUND: "-> nop" is a workaround for the M32700(TS1).
- .endm
-#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-#define ENABLE_INTERRUPTS(reg) ENABLE_INTERRUPTS reg
- .macro ENABLE_INTERRUPTS reg
- mvfc \reg, psw
- or3 \reg, \reg, #0x0040
- mvtc \reg, psw
- .endm
-
-#define DISABLE_INTERRUPTS(reg) DISABLE_INTERRUPTS reg
- .macro DISABLE_INTERRUPTS reg
- mvfc \reg, psw
- and3 \reg, \reg, #0xffbf
- mvtc \reg, psw
- .endm
-#endif /* CONFIG_CHIP_M32102 */
-
- .macro SAVE_ALL
- push r0 ; orig_r0
- push sp ; spi (r15)
- push lr ; r14
- push r13
- mvfc r13, cr3 ; spu
- push r13
- mvfc r13, bbpc
- push r13
- mvfc r13, bbpsw
- push r13
- mvfc r13, bpc
- push r13
- mvfc r13, psw
- push r13
-#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
- mvfaclo r13, a1
- push r13
- mvfachi r13, a1
- push r13
- mvfaclo r13, a0
- push r13
- mvfachi r13, a0
- push r13
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
- mvfaclo r13
- push r13
- mvfachi r13
- push r13
- ldi r13, #0
- push r13 ; dummy push acc1h
- push r13 ; dummy push acc1l
-#else
-#error unknown isa configuration
-#endif
- ldi r13, #-1
- push r13 ; syscall_nr (default: -1)
- push r12
- push r11
- push r10
- push r9
- push r8
- push r7
- push r3
- push r2
- push r1
- push r0
- addi sp, #-4 ; room for implicit pt_regs parameter
- push r6
- push r5
- push r4
- .endm
-
- .macro RESTORE_ALL
- pop r4
- pop r5
- pop r6
- addi sp, #4
- pop r0
- pop r1
- pop r2
- pop r3
- pop r7
- pop r8
- pop r9
- pop r10
- pop r11
- pop r12
- addi r15, #4 ; Skip syscall number
-#if defined(CONFIG_ISA_M32R2) && defined(CONFIG_ISA_DSP_LEVEL2)
- pop r13
- mvtachi r13, a0
- pop r13
- mvtaclo r13, a0
- pop r13
- mvtachi r13, a1
- pop r13
- mvtaclo r13, a1
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
- pop r13 ; dummy pop acc1h
- pop r13 ; dummy pop acc1l
- pop r13
- mvtachi r13
- pop r13
- mvtaclo r13
-#else
-#error unknown isa configuration
-#endif
- pop r14
- mvtc r14, psw
- pop r14
- mvtc r14, bpc
- addi sp, #8 ; Skip bbpsw, bbpc
- pop r14
- mvtc r14, cr3 ; spu
- pop r13
- pop lr ; r14
- pop sp ; spi (r15)
- addi sp, #4 ; Skip orig_r0
- .fillinsn
-1: rte
- .section .fixup,"ax"
-2: bl do_exit
- .previous
- .section __ex_table,"a"
- ALIGN
- .long 1b, 2b
- .previous
- .endm
-
-#define GET_CURRENT(reg) get_current reg
- .macro get_current reg
- ldi \reg, #-8192
- and \reg, sp
- .endm
-
-#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
- .macro SWITCH_TO_KERNEL_STACK
- ; switch to kernel stack (spi)
- clrpsw #0x80 -> nop
- .endm
-#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
- .macro SWITCH_TO_KERNEL_STACK
- push r0 ; save r0 for working
- mvfc r0, psw
- and3 r0, r0, #0x00ff7f
- mvtc r0, psw
- slli r0, #16
- bltz r0, 1f ; check BSM-bit
-;
- ;; called from kernel context: previous stack = spi
- pop r0 ; retrieve r0
- bra 2f
- .fillinsn
-1:
- ;; called from user context: previous stack = spu
- mvfc r0, cr3 ; spu
- addi r0, #4
- mvtc r0, cr3 ; spu
- ld r0, @(-4,r0) ; retrieve r0
- .fillinsn
-2:
- .endm
-#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_M32R_ASSEMBLER_H */
+++ /dev/null
-#ifndef _ASM_M32R_ATOMIC_H
-#define _ASM_M32R_ATOMIC_H
-
-/*
- * linux/include/asm-m32r/atomic.h
- *
- * M32R version:
- * Copyright (C) 2001, 2002 Hitoshi Yamamoto
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <linux/types.h>
-#include <asm/assembler.h>
-#include <asm/system.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v.
- */
-#define atomic_read(v) ((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i.
- */
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-/**
- * atomic_add_return - add integer to atomic variable and return it
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and return (@i + @v).
- */
-static __inline__ int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# atomic_add_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "add %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&v->counter), "r" (i)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * atomic_sub_return - subtract integer from atomic variable and return it
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and return (@v - @i).
- */
-static __inline__ int atomic_sub_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# atomic_sub_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "sub %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&v->counter), "r" (i)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * atomic_add - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v.
- */
-#define atomic_add(i,v) ((void) atomic_add_return((i), (v)))
-
-/**
- * atomic_sub - subtract the atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v.
- */
-#define atomic_sub(i,v) ((void) atomic_sub_return((i), (v)))
-
-/**
- * atomic_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
-
-/**
- * atomic_inc_return - increment atomic variable and return it
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1 and returns the result.
- */
-static __inline__ int atomic_inc_return(atomic_t *v)
-{
- unsigned long flags;
- int result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# atomic_inc_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "addi %0, #1; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&v->counter)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * atomic_dec_return - decrement atomic variable and return it
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and returns the result.
- */
-static __inline__ int atomic_dec_return(atomic_t *v)
-{
- unsigned long flags;
- int result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# atomic_dec_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "addi %0, #-1; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&v->counter)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * atomic_inc - increment atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1.
- */
-#define atomic_inc(v) ((void)atomic_inc_return(v))
-
-/**
- * atomic_dec - decrement atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1.
- */
-#define atomic_dec(v) ((void)atomic_dec_return(v))
-
-/**
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-/**
- * atomic_dec_and_test - decrement and test
- * @v: pointer of type atomic_t
- *
- * Atomically decrements @v by 1 and
- * returns true if the result is 0, or false for all
- * other cases.
- */
-#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
-
-/**
- * atomic_add_negative - add and test if negative
- * @v: pointer of type atomic_t
- * @i: integer value to add
- *
- * Atomically adds @i to @v and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-#define atomic_add_negative(i,v) (atomic_add_return((i), (v)) < 0)
-
-#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-/**
- * atomic_add_unless - add unless the number is a given value
- * @v: pointer of type atomic_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, so long as it was not @u.
- * Returns non-zero if @v was not @u, and zero otherwise.
- */
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int c, old;
- c = atomic_read(v);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = atomic_cmpxchg((v), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t *addr)
-{
- unsigned long flags;
- unsigned long tmp;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# atomic_clear_mask \n\t"
- DCACHE_CLEAR("%0", "r5", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "and %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (addr), "r" (~mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r5"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-static __inline__ void atomic_set_mask(unsigned long mask, atomic_t *addr)
-{
- unsigned long flags;
- unsigned long tmp;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# atomic_set_mask \n\t"
- DCACHE_CLEAR("%0", "r5", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "or %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (addr), "r" (mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r5"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-/* Atomic operations are already serializing on m32r */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* _ASM_M32R_ATOMIC_H */
+++ /dev/null
-#ifndef _ASM_M32R__AUXVEC_H
-#define _ASM_M32R__AUXVEC_H
-
-#endif /* _ASM_M32R__AUXVEC_H */
+++ /dev/null
-#ifndef _ASM_M32R_BITOPS_H
-#define _ASM_M32R_BITOPS_H
-
-/*
- * linux/include/asm-m32r/bitops.h
- *
- * Copyright 1992, Linus Torvalds.
- *
- * M32R version:
- * Copyright (C) 2001, 2002 Hitoshi Yamamoto
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h>
-#include <asm/assembler.h>
-#include <asm/system.h>
-#include <asm/byteorder.h>
-#include <asm/types.h>
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered. See __set_bit()
- * if you do not require the atomic guarantees.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void set_bit(int nr, volatile void * addr)
-{
- __u32 mask;
- volatile __u32 *a = addr;
- unsigned long flags;
- unsigned long tmp;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "r6", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "or %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (a), "r" (mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered. However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static __inline__ void clear_bit(int nr, volatile void * addr)
-{
- __u32 mask;
- volatile __u32 *a = addr;
- unsigned long flags;
- unsigned long tmp;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- local_irq_save(flags);
-
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "r6", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "and %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (a), "r" (~mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void change_bit(int nr, volatile void * addr)
-{
- __u32 mask;
- volatile __u32 *a = addr;
- unsigned long flags;
- unsigned long tmp;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "r6", "%1")
- M32R_LOCK" %0, @%1; \n\t"
- "xor %0, %2; \n\t"
- M32R_UNLOCK" %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (a), "r" (mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
-{
- __u32 mask, oldbit;
- volatile __u32 *a = addr;
- unsigned long flags;
- unsigned long tmp;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "%1", "%2")
- M32R_LOCK" %0, @%2; \n\t"
- "mv %1, %0; \n\t"
- "and %0, %3; \n\t"
- "or %1, %3; \n\t"
- M32R_UNLOCK" %1, @%2; \n\t"
- : "=&r" (oldbit), "=&r" (tmp)
- : "r" (a), "r" (mask)
- : "memory"
- );
- local_irq_restore(flags);
-
- return (oldbit != 0);
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
-{
- __u32 mask, oldbit;
- volatile __u32 *a = addr;
- unsigned long flags;
- unsigned long tmp;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- local_irq_save(flags);
-
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "%1", "%3")
- M32R_LOCK" %0, @%3; \n\t"
- "mv %1, %0; \n\t"
- "and %0, %2; \n\t"
- "not %2, %2; \n\t"
- "and %1, %2; \n\t"
- M32R_UNLOCK" %1, @%3; \n\t"
- : "=&r" (oldbit), "=&r" (tmp), "+r" (mask)
- : "r" (a)
- : "memory"
- );
- local_irq_restore(flags);
-
- return (oldbit != 0);
-}
-
-/**
- * test_and_change_bit - Change a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
-{
- __u32 mask, oldbit;
- volatile __u32 *a = addr;
- unsigned long flags;
- unsigned long tmp;
-
- a += (nr >> 5);
- mask = (1 << (nr & 0x1F));
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "%1", "%2")
- M32R_LOCK" %0, @%2; \n\t"
- "mv %1, %0; \n\t"
- "and %0, %3; \n\t"
- "xor %1, %3; \n\t"
- M32R_UNLOCK" %1, @%2; \n\t"
- : "=&r" (oldbit), "=&r" (tmp)
- : "r" (a), "r" (mask)
- : "memory"
- );
- local_irq_restore(flags);
-
- return (oldbit != 0);
-}
-
-#include <asm-generic/bitops/non-atomic.h>
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#endif /* __KERNEL__ */
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/ext2-atomic.h>
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_BITOPS_H */
+++ /dev/null
-#ifndef _M32R_BUG_H
-#define _M32R_BUG_H
-#include <asm-generic/bug.h>
-#endif
+++ /dev/null
-#ifndef _ASM_M32R_BUGS_H
-#define _ASM_M32R_BUGS_H
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-#include <asm/processor.h>
-
-static void __init check_bugs(void)
-{
- extern unsigned long loops_per_jiffy;
-
- current_cpu_data.loops_per_jiffy = loops_per_jiffy;
-}
-
-#endif /* _ASM_M32R_BUGS_H */
+++ /dev/null
-#ifndef _ASM_M32R_BYTEORDER_H
-#define _ASM_M32R_BYTEORDER_H
-
-#if defined(__LITTLE_ENDIAN__)
-# include <linux/byteorder/little_endian.h>
-#else
-# include <linux/byteorder/big_endian.h>
-#endif
-
-#endif /* _ASM_M32R_BYTEORDER_H */
+++ /dev/null
-#ifndef _ASM_M32R_CACHE_H
-#define _ASM_M32R_CACHE_H
-
-/* L1 cache line size */
-#define L1_CACHE_SHIFT 4
-#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
-#endif /* _ASM_M32R_CACHE_H */
+++ /dev/null
-/*
- * cachectl.h -- defines for M32R cache control system calls
- *
- * Copyright (C) 2003 by Kazuhiro Inaoka
- */
-#ifndef __ASM_M32R_CACHECTL
-#define __ASM_M32R_CACHECTL
-
-/*
- * Options for cacheflush system call
- *
- * cacheflush() is currently fluch_cache_all().
- */
-#define ICACHE (1<<0) /* flush instruction cache */
-#define DCACHE (1<<1) /* writeback and flush data cache */
-#define BCACHE (ICACHE|DCACHE) /* flush both caches */
-
-/*
- * Caching modes for the cachectl(2) call
- *
- * cachectl(2) is currently not supported and returns ENOSYS.
- */
-#define CACHEABLE 0 /* make pages cacheable */
-#define UNCACHEABLE 1 /* make pages uncacheable */
-
-#endif /* __ASM_M32R_CACHECTL */
+++ /dev/null
-#ifndef _ASM_M32R_CACHEFLUSH_H
-#define _ASM_M32R_CACHEFLUSH_H
-
-#include <linux/mm.h>
-
-extern void _flush_cache_all(void);
-extern void _flush_cache_copyback_all(void);
-
-#if defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#ifndef CONFIG_SMP
-#define flush_icache_range(start, end) _flush_cache_copyback_all()
-#define flush_icache_page(vma,pg) _flush_cache_copyback_all()
-#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_copyback_all()
-#define flush_cache_sigtramp(addr) _flush_cache_copyback_all()
-#else /* CONFIG_SMP */
-extern void smp_flush_cache_all(void);
-#define flush_icache_range(start, end) smp_flush_cache_all()
-#define flush_icache_page(vma,pg) smp_flush_cache_all()
-#define flush_icache_user_range(vma,pg,adr,len) smp_flush_cache_all()
-#define flush_cache_sigtramp(addr) _flush_cache_copyback_all()
-#endif /* CONFIG_SMP */
-#elif defined(CONFIG_CHIP_M32102)
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start, end) _flush_cache_all()
-#define flush_icache_page(vma,pg) _flush_cache_all()
-#define flush_icache_user_range(vma,pg,adr,len) _flush_cache_all()
-#define flush_cache_sigtramp(addr) _flush_cache_all()
-#else
-#define flush_cache_all() do { } while (0)
-#define flush_cache_mm(mm) do { } while (0)
-#define flush_cache_dup_mm(mm) do { } while (0)
-#define flush_cache_range(vma, start, end) do { } while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
-#define flush_dcache_page(page) do { } while (0)
-#define flush_dcache_mmap_lock(mapping) do { } while (0)
-#define flush_dcache_mmap_unlock(mapping) do { } while (0)
-#define flush_icache_range(start, end) do { } while (0)
-#define flush_icache_page(vma,pg) do { } while (0)
-#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
-#define flush_cache_sigtramp(addr) do { } while (0)
-#endif /* CONFIG_CHIP_* */
-
-#define flush_cache_vmap(start, end) do { } while (0)
-#define flush_cache_vunmap(start, end) do { } while (0)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { \
- memcpy(dst, src, len); \
- flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-#endif /* _ASM_M32R_CACHEFLUSH_H */
+++ /dev/null
-#ifdef __KERNEL__
-#ifndef _ASM_M32R_CHECKSUM_H
-#define _ASM_M32R_CHECKSUM_H
-
-/*
- * include/asm-m32r/checksum.h
- *
- * IP/TCP/UDP checksum routines
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Some code taken from mips and parisc architecture.
- *
- * Copyright (C) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <linux/in6.h>
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * The same as csum_partial, but copies from src while it checksums.
- *
- * Here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum);
-
-/*
- * This is a new version of the above that records errors it finds in *errp,
- * but continues and zeros thre rest of the buffer.
- */
-extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
- int len, __wsum sum,
- int *err_ptr);
-
-/*
- * Fold a partial checksum
- */
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- unsigned long tmpreg;
- __asm__(
- " sll3 %1, %0, #16 \n"
- " cmp %0, %0 \n"
- " addx %0, %1 \n"
- " ldi %1, #0 \n"
- " srli %0, #16 \n"
- " addx %0, %1 \n"
- " xor3 %0, %0, #0x0000ffff \n"
- : "=r" (sum), "=&r" (tmpreg)
- : "0" (sum)
- : "cbit"
- );
- return (__force __sum16)sum;
-}
-
-/*
- * This is a version of ip_compute_csum() optimized for IP headers,
- * which always checksum on 4 octet boundaries.
- */
-static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
- unsigned long tmpreg0, tmpreg1;
- __wsum sum;
-
- __asm__ __volatile__(
- " ld %0, @%1+ \n"
- " addi %2, #-4 \n"
- "# bgez %2, 2f \n"
- " cmp %0, %0 \n"
- " ld %3, @%1+ \n"
- " ld %4, @%1+ \n"
- " addx %0, %3 \n"
- " ld %3, @%1+ \n"
- " addx %0, %4 \n"
- " addx %0, %3 \n"
- " .fillinsn\n"
- "1: \n"
- " ld %4, @%1+ \n"
- " addi %2, #-1 \n"
- " addx %0, %4 \n"
- " bgtz %2, 1b \n"
- "\n"
- " ldi %3, #0 \n"
- " addx %0, %3 \n"
- " .fillinsn\n"
- "2: \n"
- /* Since the input registers which are loaded with iph and ihl
- are modified, we must also specify them as outputs, or gcc
- will assume they contain their original values. */
- : "=&r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmpreg0), "=&r" (tmpreg1)
- : "1" (iph), "2" (ihl)
- : "cbit", "memory");
-
- return csum_fold(sum);
-}
-
-static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
-{
-#if defined(__LITTLE_ENDIAN)
- unsigned long len_proto = (proto + len) << 8;
-#else
- unsigned long len_proto = proto + len;
-#endif
- unsigned long tmpreg;
-
- __asm__(
- " cmp %0, %0 \n"
- " addx %0, %2 \n"
- " addx %0, %3 \n"
- " addx %0, %4 \n"
- " ldi %1, #0 \n"
- " addx %0, %1 \n"
- : "=r" (sum), "=&r" (tmpreg)
- : "r" (daddr), "r" (saddr), "r" (len_proto), "0" (sum)
- : "cbit"
- );
-
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-
-static inline __sum16 ip_compute_csum(const void *buff, int len)
-{
- return csum_fold (csum_partial(buff, len, 0));
-}
-
-#define _HAVE_ARCH_IPV6_CSUM
-static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
- const struct in6_addr *daddr,
- __u32 len, unsigned short proto,
- __wsum sum)
-{
- unsigned long tmpreg0, tmpreg1, tmpreg2, tmpreg3;
- __asm__(
- " ld %1, @(%5) \n"
- " ld %2, @(4,%5) \n"
- " ld %3, @(8,%5) \n"
- " ld %4, @(12,%5) \n"
- " add %0, %1 \n"
- " addx %0, %2 \n"
- " addx %0, %3 \n"
- " addx %0, %4 \n"
- " ld %1, @(%6) \n"
- " ld %2, @(4,%6) \n"
- " ld %3, @(8,%6) \n"
- " ld %4, @(12,%6) \n"
- " addx %0, %1 \n"
- " addx %0, %2 \n"
- " addx %0, %3 \n"
- " addx %0, %4 \n"
- " addx %0, %7 \n"
- " addx %0, %8 \n"
- " ldi %1, #0 \n"
- " addx %0, %1 \n"
- : "=&r" (sum), "=&r" (tmpreg0), "=&r" (tmpreg1),
- "=&r" (tmpreg2), "=&r" (tmpreg3)
- : "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
- : "cbit"
- );
-
- return csum_fold(sum);
-}
-
-#endif /* _ASM_M32R_CHECKSUM_H */
-#endif /* __KERNEL__ */
+++ /dev/null
-#ifndef __M32R_CPUTIME_H
-#define __M32R_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __M32R_CPUTIME_H */
+++ /dev/null
-#ifndef _ASM_M32R_CURRENT_H
-#define _ASM_M32R_CURRENT_H
-
-#include <linux/thread_info.h>
-
-struct task_struct;
-
-static __inline__ struct task_struct *get_current(void)
-{
- return current_thread_info()->task;
-}
-
-#define current (get_current())
-
-#endif /* _ASM_M32R_CURRENT_H */
+++ /dev/null
-#ifndef _ASM_M32R_DELAY_H
-#define _ASM_M32R_DELAY_H
-
-/*
- * Copyright (C) 1993 Linus Torvalds
- *
- * Delay routines calling functions in arch/m32r/lib/delay.c
- */
-
-extern void __bad_udelay(void);
-extern void __bad_ndelay(void);
-
-extern void __udelay(unsigned long usecs);
-extern void __ndelay(unsigned long nsecs);
-extern void __const_udelay(unsigned long xloops);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) (__builtin_constant_p(n) ? \
- ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c7ul)) : \
- __udelay(n))
-
-#define ndelay(n) (__builtin_constant_p(n) ? \
- ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
- __ndelay(n))
-
-#endif /* _ASM_M32R_DELAY_H */
+++ /dev/null
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
+++ /dev/null
-#include <asm-generic/div64.h>
+++ /dev/null
-#ifndef _ASM_M32R_DMA_H
-#define _ASM_M32R_DMA_H
-
-#include <asm/io.h>
-
-/*
- * The maximum address that we can perform a DMA transfer
- * to on this platform
- */
-#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x20000000)
-
-#endif /* _ASM_M32R_DMA_H */
+++ /dev/null
-#ifndef _ASM_M32R__ELF_H
-#define _ASM_M32R__ELF_H
-
-/*
- * ELF-specific definitions.
- *
- * Copyright (C) 1999-2004, Renesas Technology Corp.
- * Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/page.h>
-
-/* M32R relocation types */
-#define R_M32R_NONE 0
-#define R_M32R_16 1
-#define R_M32R_32 2
-#define R_M32R_24 3
-#define R_M32R_10_PCREL 4
-#define R_M32R_18_PCREL 5
-#define R_M32R_26_PCREL 6
-#define R_M32R_HI16_ULO 7
-#define R_M32R_HI16_SLO 8
-#define R_M32R_LO16 9
-#define R_M32R_SDA16 10
-#define R_M32R_GNU_VTINHERIT 11
-#define R_M32R_GNU_VTENTRY 12
-
-#define R_M32R_16_RELA 33
-#define R_M32R_32_RELA 34
-#define R_M32R_24_RELA 35
-#define R_M32R_10_PCREL_RELA 36
-#define R_M32R_18_PCREL_RELA 37
-#define R_M32R_26_PCREL_RELA 38
-#define R_M32R_HI16_ULO_RELA 39
-#define R_M32R_HI16_SLO_RELA 40
-#define R_M32R_LO16_RELA 41
-#define R_M32R_SDA16_RELA 42
-#define R_M32R_RELA_GNU_VTINHERIT 43
-#define R_M32R_RELA_GNU_VTENTRY 44
-
-#define R_M32R_GOT24 48
-#define R_M32R_26_PLTREL 49
-#define R_M32R_COPY 50
-#define R_M32R_GLOB_DAT 51
-#define R_M32R_JMP_SLOT 52
-#define R_M32R_RELATIVE 53
-#define R_M32R_GOTOFF 54
-#define R_M32R_GOTPC24 55
-#define R_M32R_GOT16_HI_ULO 56
-#define R_M32R_GOT16_HI_SLO 57
-#define R_M32R_GOT16_LO 58
-#define R_M32R_GOTPC_HI_ULO 59
-#define R_M32R_GOTPC_HI_SLO 60
-#define R_M32R_GOTPC_LO 61
-#define R_M32R_GOTOFF_HI_ULO 62
-#define R_M32R_GOTOFF_HI_SLO 63
-#define R_M32R_GOTOFF_LO 64
-
-#define R_M32R_NUM 256
-
-/*
- * ELF register definitions..
- */
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-
-typedef unsigned long elf_greg_t;
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-/* We have no FP mumumu. */
-typedef double elf_fpreg_t;
-typedef elf_fpreg_t elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- (((x)->e_machine == EM_M32R) || ((x)->e_machine == EM_CYGNUS_M32R))
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#if defined(__LITTLE_ENDIAN)
-#define ELF_DATA ELFDATA2LSB
-#elif defined(__BIG_ENDIAN)
-#define ELF_DATA ELFDATA2MSB
-#else
-#error no endian defined
-#endif
-#define ELF_ARCH EM_M32R
-
-/* r0 is set by ld.so to a pointer to a function which might be
- * registered using 'atexit'. This provides a mean for the dynamic
- * linker to call DT_FINI functions for shared libraries that have
- * been loaded before the code runs.
- *
- * So that we can use the same startup file with static executables,
- * we start programs with a value of 0 to indicate that there is no
- * such function.
- */
-#define ELF_PLAT_INIT(_r, load_addr) (_r)->r0 = 0
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE PAGE_SIZE
-
-/*
- * This is the location that an ET_DYN program is loaded if exec'ed.
- * Typical use of this is to invoke "./ld.so someprog" to test out a
- * new version of the loader. We need to make sure that it is out of
- * the way of the program that it will "exec", and that there is
- * sufficient room for the brk.
- */
-#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
-
-/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- now struct_user_regs, they are different) */
-
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
- memcpy((char *)pr_reg, (char *)regs, sizeof (struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. */
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo. */
-#define ELF_PLATFORM (NULL)
-
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-
-#endif /* _ASM_M32R__ELF_H */
+++ /dev/null
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
+++ /dev/null
-#ifndef _ASM_M32R_ERRNO_H
-#define _ASM_M32R_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* _ASM_M32R_ERRNO_H */
+++ /dev/null
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-
-#include <linux/fb.h>
-#include <linux/fs.h>
-#include <asm/page.h>
-
-static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
- unsigned long off)
-{
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-}
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
+++ /dev/null
-#include <asm-generic/fcntl.h>
+++ /dev/null
-/*
- * include/asm-m32r/flat.h
- *
- * uClinux flat-format executables
- *
- * Copyright (C) 2004 Kazuhiro Inaoka
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive for
- * more details.
- */
-#ifndef __ASM_M32R_FLAT_H
-#define __ASM_M32R_FLAT_H
-
-#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
-#define flat_argvp_envp_on_stack() 0
-#define flat_old_ram_flag(flags) (flags)
-#define flat_set_persistent(relval, p) 0
-#define flat_reloc_valid(reloc, size) \
- (((reloc) - textlen_for_m32r_lo16_data) <= (size))
-#define flat_get_addr_from_rp(rp, relval, flags, persistent) \
- m32r_flat_get_addr_from_rp(rp, relval, (text_len) )
-
-#define flat_put_addr_at_rp(rp, addr, relval) \
- m32r_flat_put_addr_at_rp(rp, addr, relval)
-
-/* Convert a relocation entry into an address. */
-static inline unsigned long
-flat_get_relocate_addr (unsigned long relval)
-{
- return relval & 0x00ffffff; /* Mask out top 8-bits */
-}
-
-#define flat_m32r_get_reloc_type(relval) ((relval) >> 24)
-
-#define M32R_SETH_OPCODE 0xd0c00000 /* SETH instruction code */
-
-#define FLAT_M32R_32 0x00 /* 32bits reloc */
-#define FLAT_M32R_24 0x01 /* unsigned 24bits reloc */
-#define FLAT_M32R_16 0x02 /* 16bits reloc */
-#define FLAT_M32R_LO16 0x03 /* signed low 16bits reloc (low()) */
-#define FLAT_M32R_LO16_DATA 0x04 /* signed low 16bits reloc (low())
- for a symbol in .data section */
- /* High 16bits of an address used
- when the lower 16bbits are treated
- as unsigned.
- To create SETH instruction only.
- 0x1X: X means a number of register.
- 0x10 - 0x3F are reserved. */
-#define FLAT_M32R_HI16_ULO 0x10 /* reloc for SETH Rn,#high(imm16) */
- /* High 16bits of an address used
- when the lower 16bbits are treated
- as signed.
- To create SETH instruction only.
- 0x2X: X means a number of register.
- 0x20 - 0x4F are reserved. */
-#define FLAT_M32R_HI16_SLO 0x20 /* reloc for SETH Rn,#shigh(imm16) */
-
-static unsigned long textlen_for_m32r_lo16_data = 0;
-
-static inline unsigned long m32r_flat_get_addr_from_rp (unsigned long *rp,
- unsigned long relval,
- unsigned long textlen)
-{
- unsigned int reloc = flat_m32r_get_reloc_type (relval);
- textlen_for_m32r_lo16_data = 0;
- if (reloc & 0xf0) {
- unsigned long addr = htonl(*rp);
- switch (reloc & 0xf0)
- {
- case FLAT_M32R_HI16_ULO:
- case FLAT_M32R_HI16_SLO:
- if (addr == 0) {
- /* put "seth Rn,#0x0" instead of 0 (addr). */
- *rp = (M32R_SETH_OPCODE | ((reloc & 0x0f)<<24));
- }
- return addr;
- default:
- break;
- }
- } else {
- switch (reloc)
- {
- case FLAT_M32R_LO16:
- return htonl(*rp) & 0xFFFF;
- case FLAT_M32R_LO16_DATA:
- /* FIXME: The return value will decrease by textlen
- at m32r_flat_put_addr_at_rp () */
- textlen_for_m32r_lo16_data = textlen;
- return (htonl(*rp) & 0xFFFF) + textlen;
- case FLAT_M32R_16:
- return htons(*(unsigned short *)rp) & 0xFFFF;
- case FLAT_M32R_24:
- return htonl(*rp) & 0xFFFFFF;
- case FLAT_M32R_32:
- return htonl(*rp);
- default:
- break;
- }
- }
- return ~0; /* bogus value */
-}
-
-static inline void m32r_flat_put_addr_at_rp (unsigned long *rp,
- unsigned long addr,
- unsigned long relval)
-{
- unsigned int reloc = flat_m32r_get_reloc_type (relval);
- if (reloc & 0xf0) {
- unsigned long Rn = reloc & 0x0f; /* get a number of register */
- Rn <<= 24; /* 0x0R000000 */
- reloc &= 0xf0;
- switch (reloc)
- {
- case FLAT_M32R_HI16_ULO: /* To create SETH Rn,#high(imm16) */
- *rp = (M32R_SETH_OPCODE | Rn
- | ((addr >> 16) & 0xFFFF));
- break;
- case FLAT_M32R_HI16_SLO: /* To create SETH Rn,#shigh(imm16) */
- *rp = (M32R_SETH_OPCODE | Rn
- | (((addr >> 16) + ((addr & 0x8000) ? 1 : 0))
- & 0xFFFF));
- break;
- }
- } else {
- switch (reloc) {
- case FLAT_M32R_LO16_DATA:
- addr -= textlen_for_m32r_lo16_data;
- textlen_for_m32r_lo16_data = 0;
- case FLAT_M32R_LO16:
- *rp = (htonl(*rp) & 0xFFFF0000) | (addr & 0xFFFF);
- break;
- case FLAT_M32R_16:
- *(unsigned short *)rp = addr & 0xFFFF;
- break;
- case FLAT_M32R_24:
- *rp = (htonl(*rp) & 0xFF000000) | (addr & 0xFFFFFF);
- break;
- case FLAT_M32R_32:
- *rp = addr;
- break;
- }
- }
-}
-
-#endif /* __ASM_M32R_FLAT_H */
+++ /dev/null
-/* empty */
+++ /dev/null
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
+++ /dev/null
-#ifdef __KERNEL__
-#ifndef __ASM_HARDIRQ_H
-#define __ASM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#if NR_IRQS > 256
-#define HARDIRQ_BITS 9
-#else
-#define HARDIRQ_BITS 8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-static inline void ack_bad_irq(int irq)
-{
- printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
- BUG();
-}
-
-#endif /* __ASM_HARDIRQ_H */
-#endif /* __KERNEL__ */
+++ /dev/null
-#ifndef _ASM_M32R_HW_IRQ_H
-#define _ASM_M32R_HW_IRQ_H
-
-#endif /* _ASM_M32R_HW_IRQ_H */
+++ /dev/null
-#ifndef _ASM_M32R_IO_H
-#define _ASM_M32R_IO_H
-
-#include <linux/string.h>
-#include <linux/compiler.h>
-#include <asm/page.h> /* __va */
-
-#ifdef __KERNEL__
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-
-/**
- * virt_to_phys - map virtual addresses to physical
- * @address: address to remap
- *
- * The returned physical address is the physical (CPU) mapping for
- * the memory address given. It is only valid to use this function on
- * addresses directly mapped or allocated via kmalloc.
- *
- * This function does not give bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-
-static inline unsigned long virt_to_phys(volatile void * address)
-{
- return __pa(address);
-}
-
-/**
- * phys_to_virt - map physical address to virtual
- * @address: address to remap
- *
- * The returned virtual address is a current CPU mapping for
- * the memory address given. It is only valid to use this function on
- * addresses that have a kernel mapping
- *
- * This function does not handle bus mappings for DMA transfers. In
- * almost all conceivable cases a device driver should not be using
- * this function
- */
-
-static inline void *phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-
-extern void __iomem *
-__ioremap(unsigned long offset, unsigned long size, unsigned long flags);
-
-/**
- * ioremap - map bus memory into CPU space
- * @offset: bus address of the memory
- * @size: size of the resource to map
- *
- * ioremap performs a platform specific sequence of operations to
- * make bus memory CPU accessible via the readb/readw/readl/writeb/
- * writew/writel functions and the other mmio helpers. The returned
- * address is not guaranteed to be usable directly as a virtual
- * address.
- */
-
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
-{
- return __ioremap(offset, size, 0);
-}
-
-extern void iounmap(volatile void __iomem *addr);
-#define ioremap_nocache(off,size) ioremap(off,size)
-
-/*
- * IO bus memory addresses are also 1:1 with the physical address
- */
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-#define page_to_bus page_to_phys
-#define virt_to_bus virt_to_phys
-
-extern unsigned char _inb(unsigned long);
-extern unsigned short _inw(unsigned long);
-extern unsigned long _inl(unsigned long);
-extern unsigned char _inb_p(unsigned long);
-extern unsigned short _inw_p(unsigned long);
-extern unsigned long _inl_p(unsigned long);
-extern void _outb(unsigned char, unsigned long);
-extern void _outw(unsigned short, unsigned long);
-extern void _outl(unsigned long, unsigned long);
-extern void _outb_p(unsigned char, unsigned long);
-extern void _outw_p(unsigned short, unsigned long);
-extern void _outl_p(unsigned long, unsigned long);
-extern void _insb(unsigned int, void *, unsigned long);
-extern void _insw(unsigned int, void *, unsigned long);
-extern void _insl(unsigned int, void *, unsigned long);
-extern void _outsb(unsigned int, const void *, unsigned long);
-extern void _outsw(unsigned int, const void *, unsigned long);
-extern void _outsl(unsigned int, const void *, unsigned long);
-
-static inline unsigned char _readb(unsigned long addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short _readw(unsigned long addr)
-{
- return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned long _readl(unsigned long addr)
-{
- return *(volatile unsigned long __force *)addr;
-}
-
-static inline void _writeb(unsigned char b, unsigned long addr)
-{
- *(volatile unsigned char __force *)addr = b;
-}
-
-static inline void _writew(unsigned short w, unsigned long addr)
-{
- *(volatile unsigned short __force *)addr = w;
-}
-
-static inline void _writel(unsigned long l, unsigned long addr)
-{
- *(volatile unsigned long __force *)addr = l;
-}
-
-#define inb _inb
-#define inw _inw
-#define inl _inl
-#define outb _outb
-#define outw _outw
-#define outl _outl
-
-#define inb_p _inb_p
-#define inw_p _inw_p
-#define inl_p _inl_p
-#define outb_p _outb_p
-#define outw_p _outw_p
-#define outl_p _outl_p
-
-#define insb _insb
-#define insw _insw
-#define insl _insl
-#define outsb _outsb
-#define outsw _outsw
-#define outsl _outsl
-
-#define readb(addr) _readb((unsigned long)(addr))
-#define readw(addr) _readw((unsigned long)(addr))
-#define readl(addr) _readl((unsigned long)(addr))
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-#define writeb(val, addr) _writeb((val), (unsigned long)(addr))
-#define writew(val, addr) _writew((val), (unsigned long)(addr))
-#define writel(val, addr) _writel((val), (unsigned long)(addr))
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define mmiowb()
-
-#define flush_write_buffers() do { } while (0) /* M32R_FIXME */
-
-static inline void
-memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
- memset((void __force *) addr, val, count);
-}
-
-static inline void
-memcpy_fromio(void *dst, volatile void __iomem *src, int count)
-{
- memcpy(dst, (void __force *) src, count);
-}
-
-static inline void
-memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
- memcpy((void __force *) dst, src, count);
-}
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_IO_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#ifndef __ARCH_M32R_IOCTLS_H__
-#define __ARCH_M32R_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* __ARCH_M32R_IOCTLS_H__ */
+++ /dev/null
-#ifndef _ASM_M32R_IPCBUF_H
-#define _ASM_M32R_IPCBUF_H
-
-/*
- * The ipc64_perm structure for m32r architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_M32R_IPCBUF_H */
+++ /dev/null
-#ifdef __KERNEL__
-#ifndef _ASM_M32R_IRQ_H
-#define _ASM_M32R_IRQ_H
-
-
-#if defined(CONFIG_PLAT_USRV)
-/*
- * IRQ definitions for M32700UT
- * M32700 Chip: 64 interrupts
- * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
- */
-#define M32700UT_NUM_CPU_IRQ (64)
-#define M32700UT_NUM_PLD_IRQ (32)
-#define M32700UT_IRQ_BASE 0
-#define M32700UT_CPU_IRQ_BASE M32700UT_IRQ_BASE
-#define M32700UT_PLD_IRQ_BASE (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ)
-
-#define NR_IRQS (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ)
-#elif defined(CONFIG_PLAT_M32700UT)
-/*
- * IRQ definitions for M32700UT(Rev.C) + M32R-LAN
- * M32700 Chip: 64 interrupts
- * ICU of M32700UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
- * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin
- * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin
- */
-#define M32700UT_NUM_CPU_IRQ (64)
-#define M32700UT_NUM_PLD_IRQ (32)
-#define M32700UT_NUM_LCD_PLD_IRQ (32)
-#define M32700UT_NUM_LAN_PLD_IRQ (32)
-#define M32700UT_IRQ_BASE 0
-#define M32700UT_CPU_IRQ_BASE (M32700UT_IRQ_BASE)
-#define M32700UT_PLD_IRQ_BASE \
- (M32700UT_CPU_IRQ_BASE + M32700UT_NUM_CPU_IRQ)
-#define M32700UT_LCD_PLD_IRQ_BASE \
- (M32700UT_PLD_IRQ_BASE + M32700UT_NUM_PLD_IRQ)
-#define M32700UT_LAN_PLD_IRQ_BASE \
- (M32700UT_LCD_PLD_IRQ_BASE + M32700UT_NUM_LCD_PLD_IRQ)
-
-#define NR_IRQS \
- (M32700UT_NUM_CPU_IRQ + M32700UT_NUM_PLD_IRQ \
- + M32700UT_NUM_LCD_PLD_IRQ + M32700UT_NUM_LAN_PLD_IRQ)
-#elif defined(CONFIG_PLAT_OPSPUT)
-/*
- * IRQ definitions for OPSPUT + M32R-LAN
- * OPSP Chip: 64 interrupts
- * ICU of OPSPUT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
- * ICU of M32R-LCD-on-board PLD: 32 interrupts cascaded to INT2# chip pin
- * ICU of M32R-LAN-on-board PLD: 32 interrupts cascaded to INT0# chip pin
- */
-#define OPSPUT_NUM_CPU_IRQ (64)
-#define OPSPUT_NUM_PLD_IRQ (32)
-#define OPSPUT_NUM_LCD_PLD_IRQ (32)
-#define OPSPUT_NUM_LAN_PLD_IRQ (32)
-#define OPSPUT_IRQ_BASE 0
-#define OPSPUT_CPU_IRQ_BASE (OPSPUT_IRQ_BASE)
-#define OPSPUT_PLD_IRQ_BASE \
- (OPSPUT_CPU_IRQ_BASE + OPSPUT_NUM_CPU_IRQ)
-#define OPSPUT_LCD_PLD_IRQ_BASE \
- (OPSPUT_PLD_IRQ_BASE + OPSPUT_NUM_PLD_IRQ)
-#define OPSPUT_LAN_PLD_IRQ_BASE \
- (OPSPUT_LCD_PLD_IRQ_BASE + OPSPUT_NUM_LCD_PLD_IRQ)
-
-#define NR_IRQS \
- (OPSPUT_NUM_CPU_IRQ + OPSPUT_NUM_PLD_IRQ \
- + OPSPUT_NUM_LCD_PLD_IRQ + OPSPUT_NUM_LAN_PLD_IRQ)
-
-#elif defined(CONFIG_PLAT_M32104UT)
-/*
- * IRQ definitions for M32104UT
- * M32104 Chip: 64 interrupts
- * ICU of M32104UT-on-board PLD: 32 interrupts cascaded to INT1# chip pin
- */
-#define M32104UT_NUM_CPU_IRQ (64)
-#define M32104UT_NUM_PLD_IRQ (32)
-#define M32104UT_IRQ_BASE 0
-#define M32104UT_CPU_IRQ_BASE M32104UT_IRQ_BASE
-#define M32104UT_PLD_IRQ_BASE (M32104UT_CPU_IRQ_BASE + M32104UT_NUM_CPU_IRQ)
-
-#define NR_IRQS \
- (M32104UT_NUM_CPU_IRQ + M32104UT_NUM_PLD_IRQ)
-
-#else
-#define NR_IRQS 64
-#endif
-
-#define irq_canonicalize(irq) (irq)
-
-#endif /* _ASM_M32R_IRQ_H */
-#endif /* __KERNEL__ */
+++ /dev/null
-#include <asm-generic/irq_regs.h>
+++ /dev/null
-#include <asm-generic/kdebug.h>
+++ /dev/null
-#ifndef __M32R_KMAP_TYPES_H
-#define __M32R_KMAP_TYPES_H
-
-#ifdef CONFIG_DEBUG_HIGHMEM
-# define D(n) __KM_FENCE_##n ,
-#else
-# define D(n)
-#endif
-
-enum km_type {
-D(0) KM_BOUNCE_READ,
-D(1) KM_SKB_SUNRPC_DATA,
-D(2) KM_SKB_DATA_SOFTIRQ,
-D(3) KM_USER0,
-D(4) KM_USER1,
-D(5) KM_BIO_SRC_IRQ,
-D(6) KM_BIO_DST_IRQ,
-D(7) KM_PTE0,
-D(8) KM_PTE1,
-D(9) KM_IRQ0,
-D(10) KM_IRQ1,
-D(11) KM_SOFTIRQ0,
-D(12) KM_SOFTIRQ1,
-D(13) KM_TYPE_NR
-};
-
-#undef D
-
-#endif /* __M32R_KMAP_TYPES_H */
+++ /dev/null
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#define __ALIGN .balign 4
-#define __ALIGN_STR ".balign 4"
-
-#endif /* __ASM_LINKAGE_H */
+++ /dev/null
-#ifndef __M32R_LOCAL_H
-#define __M32R_LOCAL_H
-
-/*
- * linux/include/asm-m32r/local.h
- *
- * M32R version:
- * Copyright (C) 2001, 2002 Hitoshi Yamamoto
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- * Copyright (C) 2007 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
- */
-
-#include <linux/percpu.h>
-#include <asm/assembler.h>
-#include <asm/system.h>
-#include <asm/local.h>
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-/*
- * Make sure gcc doesn't try to be clever and move things around
- * on us. We need to use _exactly_ the address the user gave us,
- * not some alias that contains the same information.
- */
-typedef struct { volatile int counter; } local_t;
-
-#define LOCAL_INIT(i) { (i) }
-
-/**
- * local_read - read local variable
- * @l: pointer of type local_t
- *
- * Atomically reads the value of @l.
- */
-#define local_read(l) ((l)->counter)
-
-/**
- * local_set - set local variable
- * @l: pointer of type local_t
- * @i: required value
- *
- * Atomically sets the value of @l to @i.
- */
-#define local_set(l, i) (((l)->counter) = (i))
-
-/**
- * local_add_return - add long to local variable and return it
- * @i: long value to add
- * @l: pointer of type local_t
- *
- * Atomically adds @i to @l and return (@i + @l).
- */
-static inline long local_add_return(long i, local_t *l)
-{
- unsigned long flags;
- long result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# local_add_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- "ld %0, @%1; \n\t"
- "add %0, %2; \n\t"
- "st %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&l->counter), "r" (i)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * local_sub_return - subtract long from local variable and return it
- * @i: long value to subtract
- * @l: pointer of type local_t
- *
- * Atomically subtracts @i from @l and return (@l - @i).
- */
-static inline long local_sub_return(long i, local_t *l)
-{
- unsigned long flags;
- long result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# local_sub_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- "ld %0, @%1; \n\t"
- "sub %0, %2; \n\t"
- "st %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&l->counter), "r" (i)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * local_add - add long to local variable
- * @i: long value to add
- * @l: pointer of type local_t
- *
- * Atomically adds @i to @l.
- */
-#define local_add(i, l) ((void) local_add_return((i), (l)))
-
-/**
- * local_sub - subtract the local variable
- * @i: long value to subtract
- * @l: pointer of type local_t
- *
- * Atomically subtracts @i from @l.
- */
-#define local_sub(i, l) ((void) local_sub_return((i), (l)))
-
-/**
- * local_sub_and_test - subtract value from variable and test result
- * @i: integer value to subtract
- * @l: pointer of type local_t
- *
- * Atomically subtracts @i from @l and returns
- * true if the result is zero, or false for all
- * other cases.
- */
-#define local_sub_and_test(i, l) (local_sub_return((i), (l)) == 0)
-
-/**
- * local_inc_return - increment local variable and return it
- * @l: pointer of type local_t
- *
- * Atomically increments @l by 1 and returns the result.
- */
-static inline long local_inc_return(local_t *l)
-{
- unsigned long flags;
- long result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# local_inc_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- "ld %0, @%1; \n\t"
- "addi %0, #1; \n\t"
- "st %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&l->counter)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * local_dec_return - decrement local variable and return it
- * @l: pointer of type local_t
- *
- * Atomically decrements @l by 1 and returns the result.
- */
-static inline long local_dec_return(local_t *l)
-{
- unsigned long flags;
- long result;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# local_dec_return \n\t"
- DCACHE_CLEAR("%0", "r4", "%1")
- "ld %0, @%1; \n\t"
- "addi %0, #-1; \n\t"
- "st %0, @%1; \n\t"
- : "=&r" (result)
- : "r" (&l->counter)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return result;
-}
-
-/**
- * local_inc - increment local variable
- * @l: pointer of type local_t
- *
- * Atomically increments @l by 1.
- */
-#define local_inc(l) ((void)local_inc_return(l))
-
-/**
- * local_dec - decrement local variable
- * @l: pointer of type local_t
- *
- * Atomically decrements @l by 1.
- */
-#define local_dec(l) ((void)local_dec_return(l))
-
-/**
- * local_inc_and_test - increment and test
- * @l: pointer of type local_t
- *
- * Atomically increments @l by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define local_inc_and_test(l) (local_inc_return(l) == 0)
-
-/**
- * local_dec_and_test - decrement and test
- * @l: pointer of type local_t
- *
- * Atomically decrements @l by 1 and
- * returns true if the result is 0, or false for all
- * other cases.
- */
-#define local_dec_and_test(l) (local_dec_return(l) == 0)
-
-/**
- * local_add_negative - add and test if negative
- * @l: pointer of type local_t
- * @i: integer value to add
- *
- * Atomically adds @i to @l and returns true
- * if the result is negative, or false when
- * result is greater than or equal to zero.
- */
-#define local_add_negative(i, l) (local_add_return((i), (l)) < 0)
-
-#define local_cmpxchg(l, o, n) (cmpxchg_local(&((l)->counter), (o), (n)))
-#define local_xchg(v, new) (xchg_local(&((l)->counter), new))
-
-/**
- * local_add_unless - add unless the number is a given value
- * @l: pointer of type local_t
- * @a: the amount to add to l...
- * @u: ...unless l is equal to u.
- *
- * Atomically adds @a to @l, so long as it was not @u.
- * Returns non-zero if @l was not @u, and zero otherwise.
- */
-static inline int local_add_unless(local_t *l, long a, long u)
-{
- long c, old;
- c = local_read(l);
- for (;;) {
- if (unlikely(c == (u)))
- break;
- old = local_cmpxchg((l), c, c + (a));
- if (likely(old == c))
- break;
- c = old;
- }
- return c != (u);
-}
-
-#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
-
-static inline void local_clear_mask(unsigned long mask, local_t *addr)
-{
- unsigned long flags;
- unsigned long tmp;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# local_clear_mask \n\t"
- DCACHE_CLEAR("%0", "r5", "%1")
- "ld %0, @%1; \n\t"
- "and %0, %2; \n\t"
- "st %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (addr), "r" (~mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r5"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-static inline void local_set_mask(unsigned long mask, local_t *addr)
-{
- unsigned long flags;
- unsigned long tmp;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- "# local_set_mask \n\t"
- DCACHE_CLEAR("%0", "r5", "%1")
- "ld %0, @%1; \n\t"
- "or %0, %2; \n\t"
- "st %0, @%1; \n\t"
- : "=&r" (tmp)
- : "r" (addr), "r" (mask)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r5"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-}
-
-/* Atomic operations are already serializing on m32r */
-#define smp_mb__before_local_dec() barrier()
-#define smp_mb__after_local_dec() barrier()
-#define smp_mb__before_local_inc() barrier()
-#define smp_mb__after_local_inc() barrier()
-
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations. Note they take
- * a variable, not an address.
- */
-
-#define __local_inc(l) ((l)->a.counter++)
-#define __local_dec(l) ((l)->a.counter++)
-#define __local_add(i, l) ((l)->a.counter += (i))
-#define __local_sub(i, l) ((l)->a.counter -= (i))
-
-/* Use these for per-cpu local_t variables: on some archs they are
- * much more efficient than these naive implementations. Note they take
- * a variable, not an address.
- */
-
-/* Need to disable preemption for the cpu local counters otherwise we could
- still access a variable of a previous CPU in a non local way. */
-#define cpu_local_wrap_v(l) \
- ({ local_t res__; \
- preempt_disable(); \
- res__ = (l); \
- preempt_enable(); \
- res__; })
-#define cpu_local_wrap(l) \
- ({ preempt_disable(); \
- l; \
- preempt_enable(); }) \
-
-#define cpu_local_read(l) cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
-#define cpu_local_set(l, i) cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
-#define cpu_local_inc(l) cpu_local_wrap(local_inc(&__get_cpu_var(l)))
-#define cpu_local_dec(l) cpu_local_wrap(local_dec(&__get_cpu_var(l)))
-#define cpu_local_add(i, l) cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
-#define cpu_local_sub(i, l) cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
-
-#define __cpu_local_inc(l) cpu_local_inc(l)
-#define __cpu_local_dec(l) cpu_local_dec(l)
-#define __cpu_local_add(i, l) cpu_local_add((i), (l))
-#define __cpu_local_sub(i, l) cpu_local_sub((i), (l))
-
-#endif /* __M32R_LOCAL_H */
+++ /dev/null
-#ifndef _M32102_H_
-#define _M32102_H_
-
-/*
- * Renesas M32R 32102 group
- *
- * Copyright (c) 2001 Hitoshi Yamamoto
- * Copyright (c) 2003, 2004 Renesas Technology Corp.
- */
-
-/*======================================================================*
- * Special Function Register
- *======================================================================*/
-#if !defined(CONFIG_CHIP_M32104)
-#define M32R_SFR_OFFSET (0x00E00000) /* 0x00E00000-0x00EFFFFF 1[MB] */
-#else
-#define M32R_SFR_OFFSET (0x00700000) /* 0x00700000-0x007FFFFF 1[MB] */
-#endif
-
-/*
- * Clock and Power Management registers.
- */
-#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET)
-
-#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET)
-#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET)
-#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET)
-
-/*
- * DMA Controller registers.
- */
-#define M32R_DMA_OFFSET (0x000F8000+M32R_SFR_OFFSET)
-
-#define M32R_DMAEN_PORTL (0x000+M32R_DMA_OFFSET)
-#define M32R_DMAISTS_PORTL (0x004+M32R_DMA_OFFSET)
-#define M32R_DMAEDET_PORTL (0x008+M32R_DMA_OFFSET)
-#define M32R_DMAASTS_PORTL (0x00c+M32R_DMA_OFFSET)
-
-#define M32R_DMA0CR0_PORTL (0x100+M32R_DMA_OFFSET)
-#define M32R_DMA0CR1_PORTL (0x104+M32R_DMA_OFFSET)
-#define M32R_DMA0CSA_PORTL (0x108+M32R_DMA_OFFSET)
-#define M32R_DMA0RSA_PORTL (0x10c+M32R_DMA_OFFSET)
-#define M32R_DMA0CDA_PORTL (0x110+M32R_DMA_OFFSET)
-#define M32R_DMA0RDA_PORTL (0x114+M32R_DMA_OFFSET)
-#define M32R_DMA0CBCUT_PORTL (0x118+M32R_DMA_OFFSET)
-#define M32R_DMA0RBCUT_PORTL (0x11c+M32R_DMA_OFFSET)
-
-#define M32R_DMA1CR0_PORTL (0x200+M32R_DMA_OFFSET)
-#define M32R_DMA1CR1_PORTL (0x204+M32R_DMA_OFFSET)
-#define M32R_DMA1CSA_PORTL (0x208+M32R_DMA_OFFSET)
-#define M32R_DMA1RSA_PORTL (0x20c+M32R_DMA_OFFSET)
-#define M32R_DMA1CDA_PORTL (0x210+M32R_DMA_OFFSET)
-#define M32R_DMA1RDA_PORTL (0x214+M32R_DMA_OFFSET)
-#define M32R_DMA1CBCUT_PORTL (0x218+M32R_DMA_OFFSET)
-#define M32R_DMA1RBCUT_PORTL (0x21c+M32R_DMA_OFFSET)
-
-/*
- * Multi Function Timer registers.
- */
-#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET)
-
-#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */
-#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */
-
-#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET)
-#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */
-#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */
-#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */
-#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */
-#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */
-
-#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET)
-#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */
-#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */
-#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */
-#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */
-#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */
-
-#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET)
-#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */
-#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */
-#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */
-#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */
-#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */
-
-#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET)
-#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */
-#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */
-#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */
-#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */
-#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */
-
-#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET)
-#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */
-#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */
-#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */
-#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */
-#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */
-
-#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET)
-#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */
-#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */
-#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */
-#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */
-#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */
-
-#if (defined(CONFIG_CHIP_M32700) && !defined(CONFIG_PLAT_MAPPI2)) \
- || defined(CONFIG_CHIP_M32104)
-#define M32R_MFTCR_MFT0MSK (1UL<<31) /* b0 */
-#define M32R_MFTCR_MFT1MSK (1UL<<30) /* b1 */
-#define M32R_MFTCR_MFT2MSK (1UL<<29) /* b2 */
-#define M32R_MFTCR_MFT3MSK (1UL<<28) /* b3 */
-#define M32R_MFTCR_MFT4MSK (1UL<<27) /* b4 */
-#define M32R_MFTCR_MFT5MSK (1UL<<26) /* b5 */
-#define M32R_MFTCR_MFT0EN (1UL<<23) /* b8 */
-#define M32R_MFTCR_MFT1EN (1UL<<22) /* b9 */
-#define M32R_MFTCR_MFT2EN (1UL<<21) /* b10 */
-#define M32R_MFTCR_MFT3EN (1UL<<20) /* b11 */
-#define M32R_MFTCR_MFT4EN (1UL<<19) /* b12 */
-#define M32R_MFTCR_MFT5EN (1UL<<18) /* b13 */
-#else
-#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */
-#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */
-#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */
-#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */
-#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */
-#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */
-#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */
-#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */
-#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */
-#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */
-#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */
-#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */
-#endif
-
-#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */
-#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */
-#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */
-#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */
-#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */
-#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */
-#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */
-#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */
-#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */
-#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */
-#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */
-#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */
-#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */
-#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */
-#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */
-
-/*
- * Serial I/O registers.
- */
-#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET)
-
-#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET)
-#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET)
-#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET)
-#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET)
-#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET)
-#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET)
-#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET)
-#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET)
-#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET)
-
-/*
- * Interrupt Control Unit registers.
- */
-#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET)
-#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET)
-#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET)
-#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET)
-#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET)
-#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET)
-#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */
-#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */
-#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */
-#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */
-#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */
-#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */
-#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */
-#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */
-#define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */
-#define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */
-#define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */
-#define M32R_ICU_CR19_PORTL (0x248+M32R_ICU_OFFSET) /* MFT3 */
-#define M32R_ICU_CR20_PORTL (0x24C+M32R_ICU_OFFSET) /* MFT4 */
-#define M32R_ICU_CR21_PORTL (0x250+M32R_ICU_OFFSET) /* MFT5 */
-#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* DMA0 */
-#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* DMA1 */
-#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* SIO0 */
-#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* SIO0 */
-#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* SIO1 */
-#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* SIO1 */
-#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* SIO2 */
-#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* SIO2 */
-#define M32R_ICU_CR54_PORTL (0x2D4+M32R_ICU_OFFSET) /* SIO3 */
-#define M32R_ICU_CR55_PORTL (0x2D8+M32R_ICU_OFFSET) /* SIO3 */
-#define M32R_ICU_CR56_PORTL (0x2DC+M32R_ICU_OFFSET) /* SIO4 */
-#define M32R_ICU_CR57_PORTL (0x2E0+M32R_ICU_OFFSET) /* SIO4 */
-
-#ifdef CONFIG_SMP
-#define M32R_ICU_IPICR0_PORTL (0x2dc+M32R_ICU_OFFSET) /* IPI0 */
-#define M32R_ICU_IPICR1_PORTL (0x2e0+M32R_ICU_OFFSET) /* IPI1 */
-#define M32R_ICU_IPICR2_PORTL (0x2e4+M32R_ICU_OFFSET) /* IPI2 */
-#define M32R_ICU_IPICR3_PORTL (0x2e8+M32R_ICU_OFFSET) /* IPI3 */
-#define M32R_ICU_IPICR4_PORTL (0x2ec+M32R_ICU_OFFSET) /* IPI4 */
-#define M32R_ICU_IPICR5_PORTL (0x2f0+M32R_ICU_OFFSET) /* IPI5 */
-#define M32R_ICU_IPICR6_PORTL (0x2f4+M32R_ICU_OFFSET) /* IPI6 */
-#define M32R_ICU_IPICR7_PORTL (0x2f8+M32R_ICU_OFFSET) /* IPI7 */
-#endif /* CONFIG_SMP */
-
-#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */
-#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */
-#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */
-#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */
-#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */
-#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */
-#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */
-#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */
-
-#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */
-#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */
-#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */
-#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */
-#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/
-#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */
-#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */
-#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */
-#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */
-#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */
-#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */
-#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */
-#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */
-#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */
-
-#define M32R_IRQ_INT0 (1) /* INT0 */
-#define M32R_IRQ_INT1 (2) /* INT1 */
-#define M32R_IRQ_INT2 (3) /* INT2 */
-#define M32R_IRQ_INT3 (4) /* INT3 */
-#define M32R_IRQ_INT4 (5) /* INT4 */
-#define M32R_IRQ_INT5 (6) /* INT5 */
-#define M32R_IRQ_INT6 (7) /* INT6 */
-#define M32R_IRQ_MFT0 (16) /* MFT0 */
-#define M32R_IRQ_MFT1 (17) /* MFT1 */
-#define M32R_IRQ_MFT2 (18) /* MFT2 */
-#define M32R_IRQ_MFT3 (19) /* MFT3 */
-#ifdef CONFIG_CHIP_M32104
-#define M32R_IRQ_MFTX0 (24) /* MFTX0 */
-#define M32R_IRQ_MFTX1 (25) /* MFTX1 */
-#define M32R_IRQ_DMA0 (32) /* DMA0 */
-#define M32R_IRQ_DMA1 (33) /* DMA1 */
-#define M32R_IRQ_DMA2 (34) /* DMA2 */
-#define M32R_IRQ_DMA3 (35) /* DMA3 */
-#define M32R_IRQ_SIO0_R (40) /* SIO0 send */
-#define M32R_IRQ_SIO0_S (41) /* SIO0 receive */
-#define M32R_IRQ_SIO1_R (42) /* SIO1 send */
-#define M32R_IRQ_SIO1_S (43) /* SIO1 receive */
-#define M32R_IRQ_SIO2_R (44) /* SIO2 send */
-#define M32R_IRQ_SIO2_S (45) /* SIO2 receive */
-#define M32R_IRQ_SIO3_R (46) /* SIO3 send */
-#define M32R_IRQ_SIO3_S (47) /* SIO3 receive */
-#define M32R_IRQ_ADC (56) /* ADC */
-#define M32R_IRQ_PC (57) /* PC */
-#else /* ! M32104 */
-#define M32R_IRQ_DMA0 (32) /* DMA0 */
-#define M32R_IRQ_DMA1 (33) /* DMA1 */
-#define M32R_IRQ_SIO0_R (48) /* SIO0 send */
-#define M32R_IRQ_SIO0_S (49) /* SIO0 receive */
-#define M32R_IRQ_SIO1_R (50) /* SIO1 send */
-#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */
-#define M32R_IRQ_SIO2_R (52) /* SIO2 send */
-#define M32R_IRQ_SIO2_S (53) /* SIO2 receive */
-#define M32R_IRQ_SIO3_R (54) /* SIO3 send */
-#define M32R_IRQ_SIO3_S (55) /* SIO3 receive */
-#define M32R_IRQ_SIO4_R (56) /* SIO4 send */
-#define M32R_IRQ_SIO4_S (57) /* SIO4 receive */
-#endif /* ! M32104 */
-
-#ifdef CONFIG_SMP
-#define M32R_IRQ_IPI0 (56)
-#define M32R_IRQ_IPI1 (57)
-#define M32R_IRQ_IPI2 (58)
-#define M32R_IRQ_IPI3 (59)
-#define M32R_IRQ_IPI4 (60)
-#define M32R_IRQ_IPI5 (61)
-#define M32R_IRQ_IPI6 (62)
-#define M32R_IRQ_IPI7 (63)
-#define M32R_CPUID_PORTL (0xffffffe0)
-
-#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET)
-
-#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME3_PORTL (0x1c+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID3_PORTL (0x2c+M32R_FPGA_TOP)
-#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP)
-#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP)
-
-#endif /* CONFIG_SMP */
-
-#ifndef __ASSEMBLY__
-typedef struct {
- unsigned long icucr; /* ICU Control Register */
-} icu_data_t;
-#endif
-
-#endif /* _M32102_H_ */
+++ /dev/null
-#ifndef _M32104UT_M32104UT_PLD_H
-#define _M32104UT_M32104UT_PLD_H
-
-/*
- * include/asm-m32r/m32104ut/m32104ut_pld.h
- *
- * Definitions for Programable Logic Device(PLD) on M32104UT board.
- * Based on m32700ut_pld.h
- *
- * Copyright (c) 2002 Takeo Takahashi
- * Copyright (c) 2005 Naoto Sugai
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#if defined(CONFIG_PLAT_M32104UT)
-#define PLD_PLAT_BASE 0x02c00000
-#else
-#error "no platform configuration"
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
-#define __reg8 (volatile unsigned char *)
-#define __reg16 (volatile unsigned short *)
-#define __reg32 (volatile unsigned int *)
-#else
-#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
-#define __reg8
-#define __reg16
-#define __reg32
-#endif /* __ASSEMBLY__ */
-
-/* CFC */
-#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
-#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
-#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
-#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
-
-/* MMC */
-#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
-#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
-#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
-#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
-#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
-#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
-#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
-#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
-#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
-#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
-#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
-#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
-
-/* ICU
- * ICUISTS: status register
- * ICUIREQ0: request register
- * ICUIREQ1: request register
- * ICUCR3: control register for CFIREQ# interrupt
- * ICUCR4: control register for CFC Card insert interrupt
- * ICUCR5: control register for CFC Card eject interrupt
- * ICUCR6: control register for external interrupt
- * ICUCR11: control register for MMC Card insert/eject interrupt
- * ICUCR13: control register for SC error interrupt
- * ICUCR14: control register for SC receive interrupt
- * ICUCR15: control register for SC send interrupt
- */
-
-#define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */
-#define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */
-#define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */
-#define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */
-#define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */
-#define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
-#define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */
-#define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */
-#define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */
-
-#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
-#define PLD_ICUISTS_VECB_MASK (0xf000)
-#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
-#define PLD_ICUISTS_ISN_MASK (0x07c0)
-#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
-#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
-#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
-#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
-#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
-#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
-#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
-#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
-#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
-#define PLD_ICUCR_IEN (0x1000)
-#define PLD_ICUCR_IREQ (0x0100)
-#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
-#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
-#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
-#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
-#define PLD_ICUCR_ILEVEL0 (0x0000)
-#define PLD_ICUCR_ILEVEL1 (0x0001)
-#define PLD_ICUCR_ILEVEL2 (0x0002)
-#define PLD_ICUCR_ILEVEL3 (0x0003)
-#define PLD_ICUCR_ILEVEL4 (0x0004)
-#define PLD_ICUCR_ILEVEL5 (0x0005)
-#define PLD_ICUCR_ILEVEL6 (0x0006)
-#define PLD_ICUCR_ILEVEL7 (0x0007)
-
-/* Power Control of MMC and CF */
-#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
-#define PLD_CPCR_CDP 0x0001
-
-/* LED Control
- *
- * 1: DIP swich side
- * 2: Reset switch side
- */
-#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
-#define PLD_IOLED_1_ON 0x001
-#define PLD_IOLED_1_OFF 0x000
-#define PLD_IOLED_2_ON 0x002
-#define PLD_IOLED_2_OFF 0x000
-
-/* DIP Switch
- * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
- * 1: -
- * 2: -
- * 3: -
- */
-#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
-#define PLD_IOSWSTS_IOSW2 0x0200
-#define PLD_IOSWSTS_IOSW1 0x0100
-#define PLD_IOSWSTS_IOWP0 0x0001
-
-/* CRC */
-#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
-#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
-#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
-#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
-#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
-#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
-
-/* RTC */
-#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
-#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
-#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
-#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
-#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
-
-/* SIM Card */
-#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
-#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
-#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
-#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
-#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
-#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
-#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
-
-#endif /* _M32104UT_M32104UT_PLD_H */
+++ /dev/null
-#ifndef _M32700UT_M32700UT_LAN_H
-#define _M32700UT_M32700UT_LAN_H
-
-/*
- * include/asm-m32r/m32700ut/m32700ut_lan.h
- *
- * M32700UT-LAN board
- *
- * Copyright (c) 2002 Takeo Takahashi
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define M32700UT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */)
-#else
-#define M32700UT_LAN_BASE (0x10000000 + NONCACHE_OFFSET)
-#endif /* __ASSEMBLY__ */
-
-/* ICU
- * ICUISTS: status register
- * ICUIREQ0: request register
- * ICUIREQ1: request register
- * ICUCR3: control register for CFIREQ# interrupt
- * ICUCR4: control register for CFC Card insert interrupt
- * ICUCR5: control register for CFC Card eject interrupt
- * ICUCR6: control register for external interrupt
- * ICUCR11: control register for MMC Card insert/eject interrupt
- * ICUCR13: control register for SC error interrupt
- * ICUCR14: control register for SC receive interrupt
- * ICUCR15: control register for SC send interrupt
- * ICUCR16: control register for SIO0 receive interrupt
- * ICUCR17: control register for SIO0 send interrupt
- */
-#define M32700UT_LAN_IRQ_LAN (M32700UT_LAN_PLD_IRQ_BASE + 1) /* LAN */
-#define M32700UT_LAN_IRQ_I2C (M32700UT_LAN_PLD_IRQ_BASE + 3) /* I2C */
-
-#define M32700UT_LAN_ICUISTS __reg16(M32700UT_LAN_BASE + 0xc0002)
-#define M32700UT_LAN_ICUISTS_VECB_MASK (0xf000)
-#define M32700UT_LAN_VECB(x) ((x) & M32700UT_LAN_ICUISTS_VECB_MASK)
-#define M32700UT_LAN_ICUISTS_ISN_MASK (0x07c0)
-#define M32700UT_LAN_ICUISTS_ISN(x) ((x) & M32700UT_LAN_ICUISTS_ISN_MASK)
-#define M32700UT_LAN_ICUIREQ0 __reg16(M32700UT_LAN_BASE + 0xc0004)
-#define M32700UT_LAN_ICUCR1 __reg16(M32700UT_LAN_BASE + 0xc0010)
-#define M32700UT_LAN_ICUCR3 __reg16(M32700UT_LAN_BASE + 0xc0014)
-
-/*
- * AR register on PLD
- */
-#define ARVCR0 __reg32(M32700UT_LAN_BASE + 0x40000)
-#define ARVCR0_VDS 0x00080000
-#define ARVCR0_RST 0x00010000
-#define ARVCR1 __reg32(M32700UT_LAN_BASE + 0x40004)
-#define ARVCR1_QVGA 0x02000000
-#define ARVCR1_NORMAL 0x01000000
-#define ARVCR1_HIEN 0x00010000
-#define ARVHCOUNT __reg32(M32700UT_LAN_BASE + 0x40008)
-#define ARDATA __reg32(M32700UT_LAN_BASE + 0x40010)
-#define ARINTSEL __reg32(M32700UT_LAN_BASE + 0x40014)
-#define ARINTSEL_INT3 0x10000000 /* CPU INT3 */
-#define ARDATA32 __reg32(M32700UT_LAN_BASE + 0x04040010) // Block 5
-/*
-#define ARINTSEL_SEL2 0x00002000
-#define ARINTSEL_SEL3 0x00001000
-#define ARINTSEL_SEL6 0x00000200
-#define ARINTSEL_SEL7 0x00000100
-#define ARINTSEL_SEL9 0x00000040
-#define ARINTSEL_SEL10 0x00000020
-#define ARINTSEL_SEL11 0x00000010
-#define ARINTSEL_SEL12 0x00000008
-*/
-
-/*
- * I2C register on PLD
- */
-#define PLDI2CCR __reg32(M32700UT_LAN_BASE + 0x40040)
-#define PLDI2CCR_ES0 0x00000001 /* enable I2C interface */
-#define PLDI2CMOD __reg32(M32700UT_LAN_BASE + 0x40044)
-#define PLDI2CMOD_ACKCLK 0x00000200
-#define PLDI2CMOD_DTWD 0x00000100
-#define PLDI2CMOD_10BT 0x00000004
-#define PLDI2CMOD_ATM_NORMAL 0x00000000
-#define PLDI2CMOD_ATM_AUTO 0x00000003
-#define PLDI2CACK __reg32(M32700UT_LAN_BASE + 0x40048)
-#define PLDI2CACK_ACK 0x00000001
-#define PLDI2CFREQ __reg32(M32700UT_LAN_BASE + 0x4004c)
-#define PLDI2CCND __reg32(M32700UT_LAN_BASE + 0x40050)
-#define PLDI2CCND_START 0x00000001
-#define PLDI2CCND_STOP 0x00000002
-#define PLDI2CSTEN __reg32(M32700UT_LAN_BASE + 0x40054)
-#define PLDI2CSTEN_STEN 0x00000001
-#define PLDI2CDATA __reg32(M32700UT_LAN_BASE + 0x40060)
-#define PLDI2CSTS __reg32(M32700UT_LAN_BASE + 0x40064)
-#define PLDI2CSTS_TRX 0x00000020
-#define PLDI2CSTS_BB 0x00000010
-#define PLDI2CSTS_NOACK 0x00000001 /* 0:ack, 1:noack */
-
-#endif /* _M32700UT_M32700UT_LAN_H */
+++ /dev/null
-#ifndef _M32700UT_M32700UT_LCD_H
-#define _M32700UT_M32700UT_LCD_H
-
-/*
- * include/asm-m32r/m32700ut/m32700ut_lcd.h
- *
- * M32700UT-LCD board
- *
- * Copyright (c) 2002 Takeo Takahashi
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define M32700UT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */)
-#else
-#define M32700UT_LCD_BASE (0x10000000 + NONCACHE_OFFSET)
-#endif /* __ASSEMBLY__ */
-
-/*
- * ICU
- */
-#define M32700UT_LCD_IRQ_BAT_INT (M32700UT_LCD_PLD_IRQ_BASE + 1)
-#define M32700UT_LCD_IRQ_USB_INT1 (M32700UT_LCD_PLD_IRQ_BASE + 2)
-#define M32700UT_LCD_IRQ_AUDT0 (M32700UT_LCD_PLD_IRQ_BASE + 3)
-#define M32700UT_LCD_IRQ_AUDT2 (M32700UT_LCD_PLD_IRQ_BASE + 4)
-#define M32700UT_LCD_IRQ_BATSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 16)
-#define M32700UT_LCD_IRQ_BATSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 17)
-#define M32700UT_LCD_IRQ_ASNDSIO_RCV (M32700UT_LCD_PLD_IRQ_BASE + 18)
-#define M32700UT_LCD_IRQ_ASNDSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 19)
-#define M32700UT_LCD_IRQ_ACNLSIO_SND (M32700UT_LCD_PLD_IRQ_BASE + 21)
-
-#define M32700UT_LCD_ICUISTS __reg16(M32700UT_LCD_BASE + 0x300002)
-#define M32700UT_LCD_ICUISTS_VECB_MASK (0xf000)
-#define M32700UT_LCD_VECB(x) ((x) & M32700UT_LCD_ICUISTS_VECB_MASK)
-#define M32700UT_LCD_ICUISTS_ISN_MASK (0x07c0)
-#define M32700UT_LCD_ICUISTS_ISN(x) ((x) & M32700UT_LCD_ICUISTS_ISN_MASK)
-#define M32700UT_LCD_ICUIREQ0 __reg16(M32700UT_LCD_BASE + 0x300004)
-#define M32700UT_LCD_ICUIREQ1 __reg16(M32700UT_LCD_BASE + 0x300006)
-#define M32700UT_LCD_ICUCR1 __reg16(M32700UT_LCD_BASE + 0x300020)
-#define M32700UT_LCD_ICUCR2 __reg16(M32700UT_LCD_BASE + 0x300022)
-#define M32700UT_LCD_ICUCR3 __reg16(M32700UT_LCD_BASE + 0x300024)
-#define M32700UT_LCD_ICUCR4 __reg16(M32700UT_LCD_BASE + 0x300026)
-#define M32700UT_LCD_ICUCR16 __reg16(M32700UT_LCD_BASE + 0x300030)
-#define M32700UT_LCD_ICUCR17 __reg16(M32700UT_LCD_BASE + 0x300032)
-#define M32700UT_LCD_ICUCR18 __reg16(M32700UT_LCD_BASE + 0x300034)
-#define M32700UT_LCD_ICUCR19 __reg16(M32700UT_LCD_BASE + 0x300036)
-#define M32700UT_LCD_ICUCR21 __reg16(M32700UT_LCD_BASE + 0x30003a)
-
-#endif /* _M32700UT_M32700UT_LCD_H */
+++ /dev/null
-#ifndef _M32700UT_M32700UT_PLD_H
-#define _M32700UT_M32700UT_PLD_H
-
-/*
- * include/asm-m32r/m32700ut/m32700ut_pld.h
- *
- * Definitions for Programable Logic Device(PLD) on M32700UT board.
- *
- * Copyright (c) 2002 Takeo Takahashi
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_USRV)
-#define PLD_PLAT_BASE 0x04c00000
-#else
-#error "no platform configuration"
-#endif
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
-#define __reg8 (volatile unsigned char *)
-#define __reg16 (volatile unsigned short *)
-#define __reg32 (volatile unsigned int *)
-#else
-#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
-#define __reg8
-#define __reg16
-#define __reg32
-#endif /* __ASSEMBLY__ */
-
-/* CFC */
-#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
-#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
-#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
-#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
-#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008)
-#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
-#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
-#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010)
-
-/* MMC */
-#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
-#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
-#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
-#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
-#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
-#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
-#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
-#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
-#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
-#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
-#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
-#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
-
-/* ICU
- * ICUISTS: status register
- * ICUIREQ0: request register
- * ICUIREQ1: request register
- * ICUCR3: control register for CFIREQ# interrupt
- * ICUCR4: control register for CFC Card insert interrupt
- * ICUCR5: control register for CFC Card eject interrupt
- * ICUCR6: control register for external interrupt
- * ICUCR11: control register for MMC Card insert/eject interrupt
- * ICUCR13: control register for SC error interrupt
- * ICUCR14: control register for SC receive interrupt
- * ICUCR15: control register for SC send interrupt
- * ICUCR16: control register for SIO0 receive interrupt
- * ICUCR17: control register for SIO0 send interrupt
- */
-#if !defined(CONFIG_PLAT_USRV)
-#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */
-#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */
-#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */
-#define PLD_IRQ_CFIREQ (M32700UT_PLD_IRQ_BASE + 3) /* CF IREQ */
-#define PLD_IRQ_CFC_INSERT (M32700UT_PLD_IRQ_BASE + 4) /* CF Insert */
-#define PLD_IRQ_CFC_EJECT (M32700UT_PLD_IRQ_BASE + 5) /* CF Eject */
-#define PLD_IRQ_EXINT (M32700UT_PLD_IRQ_BASE + 6) /* EXINT */
-#define PLD_IRQ_INT7 (M32700UT_PLD_IRQ_BASE + 7) /* reserved */
-#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */
-#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */
-#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */
-#define PLD_IRQ_MMCCARD (M32700UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
-#define PLD_IRQ_INT12 (M32700UT_PLD_IRQ_BASE + 12) /* reserved */
-#define PLD_IRQ_SC_ERROR (M32700UT_PLD_IRQ_BASE + 13) /* SC error */
-#define PLD_IRQ_SC_RCV (M32700UT_PLD_IRQ_BASE + 14) /* SC receive */
-#define PLD_IRQ_SC_SND (M32700UT_PLD_IRQ_BASE + 15) /* SC send */
-#define PLD_IRQ_SIO0_RCV (M32700UT_PLD_IRQ_BASE + 16) /* SIO receive */
-#define PLD_IRQ_SIO0_SND (M32700UT_PLD_IRQ_BASE + 17) /* SIO send */
-#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */
-#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */
-#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */
-#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */
-#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */
-#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */
-#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */
-#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */
-#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */
-#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */
-#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */
-#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */
-#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */
-#define PLD_IRQ_INT31 (M32700UT_PLD_IRQ_BASE + 31) /* reserved */
-
-#else /* CONFIG_PLAT_USRV */
-
-#define PLD_IRQ_INT0 (M32700UT_PLD_IRQ_BASE + 0) /* None */
-#define PLD_IRQ_INT1 (M32700UT_PLD_IRQ_BASE + 1) /* reserved */
-#define PLD_IRQ_INT2 (M32700UT_PLD_IRQ_BASE + 2) /* reserved */
-#define PLD_IRQ_CF0 (M32700UT_PLD_IRQ_BASE + 3) /* CF0# */
-#define PLD_IRQ_CF1 (M32700UT_PLD_IRQ_BASE + 4) /* CF1# */
-#define PLD_IRQ_CF2 (M32700UT_PLD_IRQ_BASE + 5) /* CF2# */
-#define PLD_IRQ_CF3 (M32700UT_PLD_IRQ_BASE + 6) /* CF3# */
-#define PLD_IRQ_CF4 (M32700UT_PLD_IRQ_BASE + 7) /* CF4# */
-#define PLD_IRQ_INT8 (M32700UT_PLD_IRQ_BASE + 8) /* reserved */
-#define PLD_IRQ_INT9 (M32700UT_PLD_IRQ_BASE + 9) /* reserved */
-#define PLD_IRQ_INT10 (M32700UT_PLD_IRQ_BASE + 10) /* reserved */
-#define PLD_IRQ_INT11 (M32700UT_PLD_IRQ_BASE + 11) /* reserved */
-#define PLD_IRQ_UART0 (M32700UT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */
-#define PLD_IRQ_UART1 (M32700UT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */
-#define PLD_IRQ_INT14 (M32700UT_PLD_IRQ_BASE + 14) /* reserved */
-#define PLD_IRQ_INT15 (M32700UT_PLD_IRQ_BASE + 15) /* reserved */
-#define PLD_IRQ_SNDINT (M32700UT_PLD_IRQ_BASE + 16) /* SNDINT# */
-#define PLD_IRQ_INT17 (M32700UT_PLD_IRQ_BASE + 17) /* reserved */
-#define PLD_IRQ_INT18 (M32700UT_PLD_IRQ_BASE + 18) /* reserved */
-#define PLD_IRQ_INT19 (M32700UT_PLD_IRQ_BASE + 19) /* reserved */
-#define PLD_IRQ_INT20 (M32700UT_PLD_IRQ_BASE + 20) /* reserved */
-#define PLD_IRQ_INT21 (M32700UT_PLD_IRQ_BASE + 21) /* reserved */
-#define PLD_IRQ_INT22 (M32700UT_PLD_IRQ_BASE + 22) /* reserved */
-#define PLD_IRQ_INT23 (M32700UT_PLD_IRQ_BASE + 23) /* reserved */
-#define PLD_IRQ_INT24 (M32700UT_PLD_IRQ_BASE + 24) /* reserved */
-#define PLD_IRQ_INT25 (M32700UT_PLD_IRQ_BASE + 25) /* reserved */
-#define PLD_IRQ_INT26 (M32700UT_PLD_IRQ_BASE + 26) /* reserved */
-#define PLD_IRQ_INT27 (M32700UT_PLD_IRQ_BASE + 27) /* reserved */
-#define PLD_IRQ_INT28 (M32700UT_PLD_IRQ_BASE + 28) /* reserved */
-#define PLD_IRQ_INT29 (M32700UT_PLD_IRQ_BASE + 29) /* reserved */
-#define PLD_IRQ_INT30 (M32700UT_PLD_IRQ_BASE + 30) /* reserved */
-
-#endif /* CONFIG_PLAT_USRV */
-
-#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
-#define PLD_ICUISTS_VECB_MASK (0xf000)
-#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
-#define PLD_ICUISTS_ISN_MASK (0x07c0)
-#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
-#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004)
-#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006)
-#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100)
-#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102)
-#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
-#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
-#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
-#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
-#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c)
-#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e)
-#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110)
-#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112)
-#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
-#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116)
-#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
-#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
-#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
-#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e)
-#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120)
-#define PLD_ICUCR_IEN (0x1000)
-#define PLD_ICUCR_IREQ (0x0100)
-#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
-#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
-#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
-#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
-#define PLD_ICUCR_ILEVEL0 (0x0000)
-#define PLD_ICUCR_ILEVEL1 (0x0001)
-#define PLD_ICUCR_ILEVEL2 (0x0002)
-#define PLD_ICUCR_ILEVEL3 (0x0003)
-#define PLD_ICUCR_ILEVEL4 (0x0004)
-#define PLD_ICUCR_ILEVEL5 (0x0005)
-#define PLD_ICUCR_ILEVEL6 (0x0006)
-#define PLD_ICUCR_ILEVEL7 (0x0007)
-
-/* Power Control of MMC and CF */
-#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
-#define PLD_CPCR_CF 0x0001
-#define PLD_CPCR_MMC 0x0002
-
-/* LED Control
- *
- * 1: DIP swich side
- * 2: Reset switch side
- */
-#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
-#define PLD_IOLED_1_ON 0x001
-#define PLD_IOLED_1_OFF 0x000
-#define PLD_IOLED_2_ON 0x002
-#define PLD_IOLED_2_OFF 0x000
-
-/* DIP Switch
- * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
- * 1: -
- * 2: -
- * 3: -
- */
-#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
-#define PLD_IOSWSTS_IOSW2 0x0200
-#define PLD_IOSWSTS_IOSW1 0x0100
-#define PLD_IOSWSTS_IOWP0 0x0001
-
-/* CRC */
-#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
-#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
-#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
-#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
-#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
-#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
-
-/* RTC */
-#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
-#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
-#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
-#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
-#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
-
-/* SIO0 */
-#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
-#define PLD_ESIO0CR_TXEN 0x0001
-#define PLD_ESIO0CR_RXEN 0x0002
-#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
-#define PLD_ESIO0MOD0_CTSS 0x0040
-#define PLD_ESIO0MOD0_RTSS 0x0080
-#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
-#define PLD_ESIO0MOD1_LMFS 0x0010
-#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
-#define PLD_ESIO0STS_TEMP 0x0001
-#define PLD_ESIO0STS_TXCP 0x0002
-#define PLD_ESIO0STS_RXCP 0x0004
-#define PLD_ESIO0STS_TXSC 0x0100
-#define PLD_ESIO0STS_RXSC 0x0200
-#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
-#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
-#define PLD_ESIO0INTCR_TXIEN 0x0002
-#define PLD_ESIO0INTCR_RXCEN 0x0004
-#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
-#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
-#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
-
-/* SIM Card */
-#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
-#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
-#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
-#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
-#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
-#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
-#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
-
-#endif /* _M32700UT_M32700UT_PLD.H */
+++ /dev/null
-#ifndef _ASM_M32R_M32R_H_
-#define _ASM_M32R_M32R_H_
-
-/*
- * Renesas M32R processor
- *
- * Copyright (C) 2003, 2004 Renesas Technology Corp.
- */
-
-
-/* Chip type */
-#if defined(CONFIG_CHIP_XNUX_MP) || defined(CONFIG_CHIP_XNUX2_MP)
-#include <asm/m32r_mp_fpga.h>
-#elif defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_XNUX2) \
- || defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_M32102) \
- || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
-#include <asm/m32102.h>
-#endif
-
-/* Platform type */
-#if defined(CONFIG_PLAT_M32700UT)
-#include <asm/m32700ut/m32700ut_pld.h>
-#include <asm/m32700ut/m32700ut_lan.h>
-#include <asm/m32700ut/m32700ut_lcd.h>
-/* for ei_handler:linux/arch/m32r/kernel/entry.S */
-#define M32R_INT1ICU_ISTS PLD_ICUISTS
-#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE
-#define M32R_INT0ICU_ISTS M32700UT_LAN_ICUISTS
-#define M32R_INT0ICU_IRQ_BASE M32700UT_LAN_PLD_IRQ_BASE
-#define M32R_INT2ICU_ISTS M32700UT_LCD_ICUISTS
-#define M32R_INT2ICU_IRQ_BASE M32700UT_LCD_PLD_IRQ_BASE
-#endif /* CONFIG_PLAT_M32700UT */
-
-#if defined(CONFIG_PLAT_OPSPUT)
-#include <asm/opsput/opsput_pld.h>
-#include <asm/opsput/opsput_lan.h>
-#include <asm/opsput/opsput_lcd.h>
-/* for ei_handler:linux/arch/m32r/kernel/entry.S */
-#define M32R_INT1ICU_ISTS PLD_ICUISTS
-#define M32R_INT1ICU_IRQ_BASE OPSPUT_PLD_IRQ_BASE
-#define M32R_INT0ICU_ISTS OPSPUT_LAN_ICUISTS
-#define M32R_INT0ICU_IRQ_BASE OPSPUT_LAN_PLD_IRQ_BASE
-#define M32R_INT2ICU_ISTS OPSPUT_LCD_ICUISTS
-#define M32R_INT2ICU_IRQ_BASE OPSPUT_LCD_PLD_IRQ_BASE
-#endif /* CONFIG_PLAT_OPSPUT */
-
-#if defined(CONFIG_PLAT_MAPPI2)
-#include <asm/mappi2/mappi2_pld.h>
-#endif /* CONFIG_PLAT_MAPPI2 */
-
-#if defined(CONFIG_PLAT_MAPPI3)
-#include <asm/mappi3/mappi3_pld.h>
-#endif /* CONFIG_PLAT_MAPPI3 */
-
-#if defined(CONFIG_PLAT_USRV)
-#include <asm/m32700ut/m32700ut_pld.h>
-/* for ei_handler:linux/arch/m32r/kernel/entry.S */
-#define M32R_INT1ICU_ISTS PLD_ICUISTS
-#define M32R_INT1ICU_IRQ_BASE M32700UT_PLD_IRQ_BASE
-#endif
-
-#if defined(CONFIG_PLAT_M32104UT)
-#include <asm/m32104ut/m32104ut_pld.h>
-/* for ei_handler:linux/arch/m32r/kernel/entry.S */
-#define M32R_INT1ICU_ISTS PLD_ICUISTS
-#define M32R_INT1ICU_IRQ_BASE M32104UT_PLD_IRQ_BASE
-#endif /* CONFIG_PLAT_M32104 */
-
-/*
- * M32R Register
- */
-
-/*
- * MMU Register
- */
-
-#define MMU_REG_BASE (0xffff0000)
-#define ITLB_BASE (0xfe000000)
-#define DTLB_BASE (0xfe000800)
-
-#define NR_TLB_ENTRIES CONFIG_TLB_ENTRIES
-
-#define MATM MMU_REG_BASE /* MMU Address Translation Mode
- Register */
-#define MPSZ (0x04 + MMU_REG_BASE) /* MMU Page Size Designation Register */
-#define MASID (0x08 + MMU_REG_BASE) /* MMU Address Space ID Register */
-#define MESTS (0x0c + MMU_REG_BASE) /* MMU Exception Status Register */
-#define MDEVA (0x10 + MMU_REG_BASE) /* MMU Operand Exception Virtual
- Address Register */
-#define MDEVP (0x14 + MMU_REG_BASE) /* MMU Operand Exception Virtual Page
- Number Register */
-#define MPTB (0x18 + MMU_REG_BASE) /* MMU Page Table Base Register */
-#define MSVA (0x20 + MMU_REG_BASE) /* MMU Search Virtual Address
- Register */
-#define MTOP (0x24 + MMU_REG_BASE) /* MMU TLB Operation Register */
-#define MIDXI (0x28 + MMU_REG_BASE) /* MMU Index Register for
- Instruciton */
-#define MIDXD (0x2c + MMU_REG_BASE) /* MMU Index Register for Operand */
-
-#define MATM_offset (MATM - MMU_REG_BASE)
-#define MPSZ_offset (MPSZ - MMU_REG_BASE)
-#define MASID_offset (MASID - MMU_REG_BASE)
-#define MESTS_offset (MESTS - MMU_REG_BASE)
-#define MDEVA_offset (MDEVA - MMU_REG_BASE)
-#define MDEVP_offset (MDEVP - MMU_REG_BASE)
-#define MPTB_offset (MPTB - MMU_REG_BASE)
-#define MSVA_offset (MSVA - MMU_REG_BASE)
-#define MTOP_offset (MTOP - MMU_REG_BASE)
-#define MIDXI_offset (MIDXI - MMU_REG_BASE)
-#define MIDXD_offset (MIDXD - MMU_REG_BASE)
-
-#define MESTS_IT (1 << 0) /* Instruction TLB miss */
-#define MESTS_IA (1 << 1) /* Instruction Access Exception */
-#define MESTS_DT (1 << 4) /* Operand TLB miss */
-#define MESTS_DA (1 << 5) /* Operand Access Exception */
-#define MESTS_DRW (1 << 6) /* Operand Write Exception Flag */
-
-/*
- * PSW (Processor Status Word)
- */
-
-/* PSW bit */
-#define M32R_PSW_BIT_SM (7) /* Stack Mode */
-#define M32R_PSW_BIT_IE (6) /* Interrupt Enable */
-#define M32R_PSW_BIT_PM (3) /* Processor Mode [0:Supervisor,1:User] */
-#define M32R_PSW_BIT_C (0) /* Condition */
-#define M32R_PSW_BIT_BSM (7+8) /* Backup Stack Mode */
-#define M32R_PSW_BIT_BIE (6+8) /* Backup Interrupt Enable */
-#define M32R_PSW_BIT_BPM (3+8) /* Backup Processor Mode */
-#define M32R_PSW_BIT_BC (0+8) /* Backup Condition */
-
-/* PSW bit map */
-#define M32R_PSW_SM (1UL<< M32R_PSW_BIT_SM) /* Stack Mode */
-#define M32R_PSW_IE (1UL<< M32R_PSW_BIT_IE) /* Interrupt Enable */
-#define M32R_PSW_PM (1UL<< M32R_PSW_BIT_PM) /* Processor Mode */
-#define M32R_PSW_C (1UL<< M32R_PSW_BIT_C) /* Condition */
-#define M32R_PSW_BSM (1UL<< M32R_PSW_BIT_BSM) /* Backup Stack Mode */
-#define M32R_PSW_BIE (1UL<< M32R_PSW_BIT_BIE) /* Backup Interrupt Enable */
-#define M32R_PSW_BPM (1UL<< M32R_PSW_BIT_BPM) /* Backup Processor Mode */
-#define M32R_PSW_BC (1UL<< M32R_PSW_BIT_BC) /* Backup Condition */
-
-/*
- * Direct address to SFR
- */
-
-#include <asm/page.h>
-#ifdef CONFIG_MMU
-#define NONCACHE_OFFSET (__PAGE_OFFSET + 0x20000000)
-#else
-#define NONCACHE_OFFSET __PAGE_OFFSET
-#endif /* CONFIG_MMU */
-
-#define M32R_ICU_ISTS_ADDR M32R_ICU_ISTS_PORTL+NONCACHE_OFFSET
-#define M32R_ICU_IPICR_ADDR M32R_ICU_IPICR0_PORTL+NONCACHE_OFFSET
-#define M32R_ICU_IMASK_ADDR M32R_ICU_IMASK_PORTL+NONCACHE_OFFSET
-#define M32R_FPGA_CPU_NAME_ADDR M32R_FPGA_CPU_NAME0_PORTL+NONCACHE_OFFSET
-#define M32R_FPGA_MODEL_ID_ADDR M32R_FPGA_MODEL_ID0_PORTL+NONCACHE_OFFSET
-#define M32R_FPGA_VERSION_ADDR M32R_FPGA_VERSION0_PORTL+NONCACHE_OFFSET
-
-#endif /* _ASM_M32R_M32R_H_ */
+++ /dev/null
-#ifndef _ASM_M32R_M32R_MP_FPGA_
-#define _ASM_M32R_M32R_MP_FPGA_
-
-/*
- * Renesas M32R-MP-FPGA
- *
- * Copyright (c) 2002 Hitoshi Yamamoto
- * Copyright (c) 2003, 2004 Renesas Technology Corp.
- */
-
-/*
- * ========================================================
- * M32R-MP-FPGA Memory Map
- * ========================================================
- * 0x00000000 : Block#0 : 64[MB]
- * 0x03E00000 : SFR
- * 0x03E00000 : reserved
- * 0x03EF0000 : FPGA
- * 0x03EF1000 : reserved
- * 0x03EF4000 : CKM
- * 0x03EF4000 : BSELC
- * 0x03EF5000 : reserved
- * 0x03EFC000 : MFT
- * 0x03EFD000 : SIO
- * 0x03EFE000 : reserved
- * 0x03EFF000 : ICU
- * 0x03F00000 : Internal SRAM 64[KB]
- * 0x03F10000 : reserved
- * --------------------------------------------------------
- * 0x04000000 : Block#1 : 64[MB]
- * 0x04000000 : Debug board SRAM 4[MB]
- * 0x04400000 : reserved
- * --------------------------------------------------------
- * 0x08000000 : Block#2 : 64[MB]
- * --------------------------------------------------------
- * 0x0C000000 : Block#3 : 64[MB]
- * --------------------------------------------------------
- * 0x10000000 : Block#4 : 64[MB]
- * --------------------------------------------------------
- * 0x14000000 : Block#5 : 64[MB]
- * --------------------------------------------------------
- * 0x18000000 : Block#6 : 64[MB]
- * --------------------------------------------------------
- * 0x1C000000 : Block#7 : 64[MB]
- * --------------------------------------------------------
- * 0xFE000000 : TLB
- * 0xFE000000 : ITLB
- * 0xFE000080 : reserved
- * 0xFE000800 : DTLB
- * 0xFE000880 : reserved
- * --------------------------------------------------------
- * 0xFF000000 : System area
- * 0xFFFF0000 : MMU
- * 0xFFFF0030 : reserved
- * 0xFFFF8000 : Debug function
- * 0xFFFFA000 : reserved
- * 0xFFFFC000 : CPU control
- * 0xFFFFFFFF
- * ========================================================
- */
-
-/*======================================================================*
- * Special Function Register
- *======================================================================*/
-#define M32R_SFR_OFFSET (0x00E00000) /* 0x03E00000-0x03EFFFFF 1[MB] */
-
-/*
- * FPGA registers.
- */
-#define M32R_FPGA_TOP (0x000F0000+M32R_SFR_OFFSET)
-
-#define M32R_FPGA_NUM_OF_CPUS_PORTL (0x00+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME0_PORTL (0x10+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME1_PORTL (0x14+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME2_PORTL (0x18+M32R_FPGA_TOP)
-#define M32R_FPGA_CPU_NAME3_PORTL (0x1C+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID0_PORTL (0x20+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID1_PORTL (0x24+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID2_PORTL (0x28+M32R_FPGA_TOP)
-#define M32R_FPGA_MODEL_ID3_PORTL (0x2C+M32R_FPGA_TOP)
-#define M32R_FPGA_VERSION0_PORTL (0x30+M32R_FPGA_TOP)
-#define M32R_FPGA_VERSION1_PORTL (0x34+M32R_FPGA_TOP)
-
-/*
- * Clock and Power Manager registers.
- */
-#define M32R_CPM_OFFSET (0x000F4000+M32R_SFR_OFFSET)
-
-#define M32R_CPM_CPUCLKCR_PORTL (0x00+M32R_CPM_OFFSET)
-#define M32R_CPM_CLKMOD_PORTL (0x04+M32R_CPM_OFFSET)
-#define M32R_CPM_PLLCR_PORTL (0x08+M32R_CPM_OFFSET)
-
-/*
- * Block SELect Controller registers.
- */
-#define M32R_BSELC_OFFSET (0x000F5000+M32R_SFR_OFFSET)
-
-#define M32R_BSEL0_CR0_PORTL (0x000+M32R_BSELC_OFFSET)
-#define M32R_BSEL0_CR1_PORTL (0x004+M32R_BSELC_OFFSET)
-#define M32R_BSEL1_CR0_PORTL (0x100+M32R_BSELC_OFFSET)
-#define M32R_BSEL1_CR1_PORTL (0x104+M32R_BSELC_OFFSET)
-#define M32R_BSEL2_CR0_PORTL (0x200+M32R_BSELC_OFFSET)
-#define M32R_BSEL2_CR1_PORTL (0x204+M32R_BSELC_OFFSET)
-#define M32R_BSEL3_CR0_PORTL (0x300+M32R_BSELC_OFFSET)
-#define M32R_BSEL3_CR1_PORTL (0x304+M32R_BSELC_OFFSET)
-#define M32R_BSEL4_CR0_PORTL (0x400+M32R_BSELC_OFFSET)
-#define M32R_BSEL4_CR1_PORTL (0x404+M32R_BSELC_OFFSET)
-#define M32R_BSEL5_CR0_PORTL (0x500+M32R_BSELC_OFFSET)
-#define M32R_BSEL5_CR1_PORTL (0x504+M32R_BSELC_OFFSET)
-#define M32R_BSEL6_CR0_PORTL (0x600+M32R_BSELC_OFFSET)
-#define M32R_BSEL6_CR1_PORTL (0x604+M32R_BSELC_OFFSET)
-#define M32R_BSEL7_CR0_PORTL (0x700+M32R_BSELC_OFFSET)
-#define M32R_BSEL7_CR1_PORTL (0x704+M32R_BSELC_OFFSET)
-
-/*
- * Multi Function Timer registers.
- */
-#define M32R_MFT_OFFSET (0x000FC000+M32R_SFR_OFFSET)
-
-#define M32R_MFTCR_PORTL (0x000+M32R_MFT_OFFSET) /* MFT control */
-#define M32R_MFTRPR_PORTL (0x004+M32R_MFT_OFFSET) /* MFT real port */
-
-#define M32R_MFT0_OFFSET (0x100+M32R_MFT_OFFSET)
-#define M32R_MFT0MOD_PORTL (0x00+M32R_MFT0_OFFSET) /* MFT0 mode */
-#define M32R_MFT0BOS_PORTL (0x04+M32R_MFT0_OFFSET) /* MFT0 b-port output status */
-#define M32R_MFT0CUT_PORTL (0x08+M32R_MFT0_OFFSET) /* MFT0 count */
-#define M32R_MFT0RLD_PORTL (0x0C+M32R_MFT0_OFFSET) /* MFT0 reload */
-#define M32R_MFT0CMPRLD_PORTL (0x10+M32R_MFT0_OFFSET) /* MFT0 compare reload */
-
-#define M32R_MFT1_OFFSET (0x200+M32R_MFT_OFFSET)
-#define M32R_MFT1MOD_PORTL (0x00+M32R_MFT1_OFFSET) /* MFT1 mode */
-#define M32R_MFT1BOS_PORTL (0x04+M32R_MFT1_OFFSET) /* MFT1 b-port output status */
-#define M32R_MFT1CUT_PORTL (0x08+M32R_MFT1_OFFSET) /* MFT1 count */
-#define M32R_MFT1RLD_PORTL (0x0C+M32R_MFT1_OFFSET) /* MFT1 reload */
-#define M32R_MFT1CMPRLD_PORTL (0x10+M32R_MFT1_OFFSET) /* MFT1 compare reload */
-
-#define M32R_MFT2_OFFSET (0x300+M32R_MFT_OFFSET)
-#define M32R_MFT2MOD_PORTL (0x00+M32R_MFT2_OFFSET) /* MFT2 mode */
-#define M32R_MFT2BOS_PORTL (0x04+M32R_MFT2_OFFSET) /* MFT2 b-port output status */
-#define M32R_MFT2CUT_PORTL (0x08+M32R_MFT2_OFFSET) /* MFT2 count */
-#define M32R_MFT2RLD_PORTL (0x0C+M32R_MFT2_OFFSET) /* MFT2 reload */
-#define M32R_MFT2CMPRLD_PORTL (0x10+M32R_MFT2_OFFSET) /* MFT2 compare reload */
-
-#define M32R_MFT3_OFFSET (0x400+M32R_MFT_OFFSET)
-#define M32R_MFT3MOD_PORTL (0x00+M32R_MFT3_OFFSET) /* MFT3 mode */
-#define M32R_MFT3BOS_PORTL (0x04+M32R_MFT3_OFFSET) /* MFT3 b-port output status */
-#define M32R_MFT3CUT_PORTL (0x08+M32R_MFT3_OFFSET) /* MFT3 count */
-#define M32R_MFT3RLD_PORTL (0x0C+M32R_MFT3_OFFSET) /* MFT3 reload */
-#define M32R_MFT3CMPRLD_PORTL (0x10+M32R_MFT3_OFFSET) /* MFT3 compare reload */
-
-#define M32R_MFT4_OFFSET (0x500+M32R_MFT_OFFSET)
-#define M32R_MFT4MOD_PORTL (0x00+M32R_MFT4_OFFSET) /* MFT4 mode */
-#define M32R_MFT4BOS_PORTL (0x04+M32R_MFT4_OFFSET) /* MFT4 b-port output status */
-#define M32R_MFT4CUT_PORTL (0x08+M32R_MFT4_OFFSET) /* MFT4 count */
-#define M32R_MFT4RLD_PORTL (0x0C+M32R_MFT4_OFFSET) /* MFT4 reload */
-#define M32R_MFT4CMPRLD_PORTL (0x10+M32R_MFT4_OFFSET) /* MFT4 compare reload */
-
-#define M32R_MFT5_OFFSET (0x600+M32R_MFT_OFFSET)
-#define M32R_MFT5MOD_PORTL (0x00+M32R_MFT5_OFFSET) /* MFT4 mode */
-#define M32R_MFT5BOS_PORTL (0x04+M32R_MFT5_OFFSET) /* MFT4 b-port output status */
-#define M32R_MFT5CUT_PORTL (0x08+M32R_MFT5_OFFSET) /* MFT4 count */
-#define M32R_MFT5RLD_PORTL (0x0C+M32R_MFT5_OFFSET) /* MFT4 reload */
-#define M32R_MFT5CMPRLD_PORTL (0x10+M32R_MFT5_OFFSET) /* MFT4 compare reload */
-
-#define M32R_MFTCR_MFT0MSK (1UL<<15) /* b16 */
-#define M32R_MFTCR_MFT1MSK (1UL<<14) /* b17 */
-#define M32R_MFTCR_MFT2MSK (1UL<<13) /* b18 */
-#define M32R_MFTCR_MFT3MSK (1UL<<12) /* b19 */
-#define M32R_MFTCR_MFT4MSK (1UL<<11) /* b20 */
-#define M32R_MFTCR_MFT5MSK (1UL<<10) /* b21 */
-#define M32R_MFTCR_MFT0EN (1UL<<7) /* b24 */
-#define M32R_MFTCR_MFT1EN (1UL<<6) /* b25 */
-#define M32R_MFTCR_MFT2EN (1UL<<5) /* b26 */
-#define M32R_MFTCR_MFT3EN (1UL<<4) /* b27 */
-#define M32R_MFTCR_MFT4EN (1UL<<3) /* b28 */
-#define M32R_MFTCR_MFT5EN (1UL<<2) /* b29 */
-
-#define M32R_MFTMOD_CC_MASK (1UL<<15) /* b16 */
-#define M32R_MFTMOD_TCCR (1UL<<13) /* b18 */
-#define M32R_MFTMOD_GTSEL000 (0UL<<8) /* b21-23 : 000 */
-#define M32R_MFTMOD_GTSEL001 (1UL<<8) /* b21-23 : 001 */
-#define M32R_MFTMOD_GTSEL010 (2UL<<8) /* b21-23 : 010 */
-#define M32R_MFTMOD_GTSEL011 (3UL<<8) /* b21-23 : 011 */
-#define M32R_MFTMOD_GTSEL110 (6UL<<8) /* b21-23 : 110 */
-#define M32R_MFTMOD_GTSEL111 (7UL<<8) /* b21-23 : 111 */
-#define M32R_MFTMOD_CMSEL (1UL<<3) /* b28 */
-#define M32R_MFTMOD_CSSEL000 (0UL<<0) /* b29-b31 : 000 */
-#define M32R_MFTMOD_CSSEL001 (1UL<<0) /* b29-b31 : 001 */
-#define M32R_MFTMOD_CSSEL010 (2UL<<0) /* b29-b31 : 010 */
-#define M32R_MFTMOD_CSSEL011 (3UL<<0) /* b29-b31 : 011 */
-#define M32R_MFTMOD_CSSEL100 (4UL<<0) /* b29-b31 : 100 */
-#define M32R_MFTMOD_CSSEL110 (6UL<<0) /* b29-b31 : 110 */
-
-/*
- * Serial I/O registers.
- */
-#define M32R_SIO_OFFSET (0x000FD000+M32R_SFR_OFFSET)
-
-#define M32R_SIO0_CR_PORTL (0x000+M32R_SIO_OFFSET)
-#define M32R_SIO0_MOD0_PORTL (0x004+M32R_SIO_OFFSET)
-#define M32R_SIO0_MOD1_PORTL (0x008+M32R_SIO_OFFSET)
-#define M32R_SIO0_STS_PORTL (0x00C+M32R_SIO_OFFSET)
-#define M32R_SIO0_TRCR_PORTL (0x010+M32R_SIO_OFFSET)
-#define M32R_SIO0_BAUR_PORTL (0x014+M32R_SIO_OFFSET)
-#define M32R_SIO0_RBAUR_PORTL (0x018+M32R_SIO_OFFSET)
-#define M32R_SIO0_TXB_PORTL (0x01C+M32R_SIO_OFFSET)
-#define M32R_SIO0_RXB_PORTL (0x020+M32R_SIO_OFFSET)
-
-/*
- * Interrupt Control Unit registers.
- */
-#define M32R_ICU_OFFSET (0x000FF000+M32R_SFR_OFFSET)
-
-#define M32R_ICU_ISTS_PORTL (0x004+M32R_ICU_OFFSET)
-#define M32R_ICU_IREQ0_PORTL (0x008+M32R_ICU_OFFSET)
-#define M32R_ICU_IREQ1_PORTL (0x00C+M32R_ICU_OFFSET)
-#define M32R_ICU_SBICR_PORTL (0x018+M32R_ICU_OFFSET)
-#define M32R_ICU_IMASK_PORTL (0x01C+M32R_ICU_OFFSET)
-#define M32R_ICU_CR1_PORTL (0x200+M32R_ICU_OFFSET) /* INT0 */
-#define M32R_ICU_CR2_PORTL (0x204+M32R_ICU_OFFSET) /* INT1 */
-#define M32R_ICU_CR3_PORTL (0x208+M32R_ICU_OFFSET) /* INT2 */
-#define M32R_ICU_CR4_PORTL (0x20C+M32R_ICU_OFFSET) /* INT3 */
-#define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */
-#define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */
-#define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */
-#define M32R_ICU_CR8_PORTL (0x218+M32R_ICU_OFFSET) /* INT7 */
-#define M32R_ICU_CR32_PORTL (0x27C+M32R_ICU_OFFSET) /* SIO0 RX */
-#define M32R_ICU_CR33_PORTL (0x280+M32R_ICU_OFFSET) /* SIO0 TX */
-#define M32R_ICU_CR40_PORTL (0x29C+M32R_ICU_OFFSET) /* DMAC0 */
-#define M32R_ICU_CR41_PORTL (0x2A0+M32R_ICU_OFFSET) /* DMAC1 */
-#define M32R_ICU_CR48_PORTL (0x2BC+M32R_ICU_OFFSET) /* MFT0 */
-#define M32R_ICU_CR49_PORTL (0x2C0+M32R_ICU_OFFSET) /* MFT1 */
-#define M32R_ICU_CR50_PORTL (0x2C4+M32R_ICU_OFFSET) /* MFT2 */
-#define M32R_ICU_CR51_PORTL (0x2C8+M32R_ICU_OFFSET) /* MFT3 */
-#define M32R_ICU_CR52_PORTL (0x2CC+M32R_ICU_OFFSET) /* MFT4 */
-#define M32R_ICU_CR53_PORTL (0x2D0+M32R_ICU_OFFSET) /* MFT5 */
-#define M32R_ICU_IPICR0_PORTL (0x2DC+M32R_ICU_OFFSET) /* IPI0 */
-#define M32R_ICU_IPICR1_PORTL (0x2E0+M32R_ICU_OFFSET) /* IPI1 */
-#define M32R_ICU_IPICR2_PORTL (0x2E4+M32R_ICU_OFFSET) /* IPI2 */
-#define M32R_ICU_IPICR3_PORTL (0x2E8+M32R_ICU_OFFSET) /* IPI3 */
-#define M32R_ICU_IPICR4_PORTL (0x2EC+M32R_ICU_OFFSET) /* IPI4 */
-#define M32R_ICU_IPICR5_PORTL (0x2F0+M32R_ICU_OFFSET) /* IPI5 */
-#define M32R_ICU_IPICR6_PORTL (0x2F4+M32R_ICU_OFFSET) /* IPI6 */
-#define M32R_ICU_IPICR7_PORTL (0x2FC+M32R_ICU_OFFSET) /* IPI7 */
-
-#define M32R_ICUISTS_VECB(val) ((val>>28) & 0xF)
-#define M32R_ICUISTS_ISN(val) ((val>>22) & 0x3F)
-#define M32R_ICUISTS_PIML(val) ((val>>16) & 0x7)
-
-#define M32R_ICUIMASK_IMSK0 (0UL<<16) /* b13-b15: Disable interrupt */
-#define M32R_ICUIMASK_IMSK1 (1UL<<16) /* b13-b15: Enable level 0 interrupt */
-#define M32R_ICUIMASK_IMSK2 (2UL<<16) /* b13-b15: Enable level 0,1 interrupt */
-#define M32R_ICUIMASK_IMSK3 (3UL<<16) /* b13-b15: Enable level 0-2 interrupt */
-#define M32R_ICUIMASK_IMSK4 (4UL<<16) /* b13-b15: Enable level 0-3 interrupt */
-#define M32R_ICUIMASK_IMSK5 (5UL<<16) /* b13-b15: Enable level 0-4 interrupt */
-#define M32R_ICUIMASK_IMSK6 (6UL<<16) /* b13-b15: Enable level 0-5 interrupt */
-#define M32R_ICUIMASK_IMSK7 (7UL<<16) /* b13-b15: Enable level 0-6 interrupt */
-
-#define M32R_ICUCR_IEN (1UL<<12) /* b19: Interrupt enable */
-#define M32R_ICUCR_IRQ (1UL<<8) /* b23: Interrupt request */
-#define M32R_ICUCR_ISMOD00 (0UL<<4) /* b26-b27: Interrupt sense mode Edge HtoL */
-#define M32R_ICUCR_ISMOD01 (1UL<<4) /* b26-b27: Interrupt sense mode Level L */
-#define M32R_ICUCR_ISMOD10 (2UL<<4) /* b26-b27: Interrupt sense mode Edge LtoH*/
-#define M32R_ICUCR_ISMOD11 (3UL<<4) /* b26-b27: Interrupt sense mode Level H */
-#define M32R_ICUCR_ILEVEL0 (0UL<<0) /* b29-b31: Interrupt priority level 0 */
-#define M32R_ICUCR_ILEVEL1 (1UL<<0) /* b29-b31: Interrupt priority level 1 */
-#define M32R_ICUCR_ILEVEL2 (2UL<<0) /* b29-b31: Interrupt priority level 2 */
-#define M32R_ICUCR_ILEVEL3 (3UL<<0) /* b29-b31: Interrupt priority level 3 */
-#define M32R_ICUCR_ILEVEL4 (4UL<<0) /* b29-b31: Interrupt priority level 4 */
-#define M32R_ICUCR_ILEVEL5 (5UL<<0) /* b29-b31: Interrupt priority level 5 */
-#define M32R_ICUCR_ILEVEL6 (6UL<<0) /* b29-b31: Interrupt priority level 6 */
-#define M32R_ICUCR_ILEVEL7 (7UL<<0) /* b29-b31: Disable interrupt */
-#define M32R_ICUCR_ILEVEL_MASK (7UL)
-
-#define M32R_IRQ_INT0 (1) /* INT0 */
-#define M32R_IRQ_INT1 (2) /* INT1 */
-#define M32R_IRQ_INT2 (3) /* INT2 */
-#define M32R_IRQ_INT3 (4) /* INT3 */
-#define M32R_IRQ_INT4 (5) /* INT4 */
-#define M32R_IRQ_INT5 (6) /* INT5 */
-#define M32R_IRQ_INT6 (7) /* INT6 */
-#define M32R_IRQ_INT7 (8) /* INT7 */
-#define M32R_IRQ_MFT0 (16) /* MFT0 */
-#define M32R_IRQ_MFT1 (17) /* MFT1 */
-#define M32R_IRQ_MFT2 (18) /* MFT2 */
-#define M32R_IRQ_MFT3 (19) /* MFT3 */
-#define M32R_IRQ_MFT4 (20) /* MFT4 */
-#define M32R_IRQ_MFT5 (21) /* MFT5 */
-#define M32R_IRQ_DMAC0 (32) /* DMAC0 */
-#define M32R_IRQ_DMAC1 (33) /* DMAC1 */
-#define M32R_IRQ_SIO0_R (48) /* SIO0 receive */
-#define M32R_IRQ_SIO0_S (49) /* SIO0 send */
-#define M32R_IRQ_SIO1_R (50) /* SIO1 send */
-#define M32R_IRQ_SIO1_S (51) /* SIO1 receive */
-#define M32R_IRQ_IPI0 (56) /* IPI0 */
-#define M32R_IRQ_IPI1 (57) /* IPI1 */
-#define M32R_IRQ_IPI2 (58) /* IPI2 */
-#define M32R_IRQ_IPI3 (59) /* IPI3 */
-#define M32R_IRQ_IPI4 (60) /* IPI4 */
-#define M32R_IRQ_IPI5 (61) /* IPI5 */
-#define M32R_IRQ_IPI6 (62) /* IPI6 */
-#define M32R_IRQ_IPI7 (63) /* IPI7 */
-
-/*======================================================================*
- * CPU
- *======================================================================*/
-
-#define M32R_CPUID_PORTL (0xFFFFFFE0)
-#define M32R_MCICAR_PORTL (0xFFFFFFF0)
-#define M32R_MCDCAR_PORTL (0xFFFFFFF4)
-#define M32R_MCCR_PORTL (0xFFFFFFFC)
-
-#endif /* _ASM_M32R_M32R_MP_FPGA_ */
+++ /dev/null
-#ifndef _MAPPI2_PLD_H
-#define _MAPPI2_PLD_H
-
-/*
- * include/asm-m32r/mappi2/mappi2_pld.h
- *
- * Definitions for Extended IO Logic on MAPPI2 board.
- * based on m32700ut_pld.h
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef __ASSEMBLY__
-/* FIXME:
- * Some C functions use non-cache address, so can't define non-cache address.
- */
-#define PLD_BASE (0x10c00000 /* + NONCACHE_OFFSET */)
-#define __reg8 (volatile unsigned char *)
-#define __reg16 (volatile unsigned short *)
-#define __reg32 (volatile unsigned int *)
-#else
-#define PLD_BASE (0x10c00000 + NONCACHE_OFFSET)
-#define __reg8
-#define __reg16
-#define __reg32
-#endif /* __ASSEMBLY__ */
-
-/* CFC */
-#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
-#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
-#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
-#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
-#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
-#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
-
-/* MMC */
-#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
-#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
-#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
-#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
-#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
-#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
-#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
-#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
-#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
-#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
-#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
-#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
-
-/* Power Control of MMC and CF */
-#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
-
-
-/*==== ICU ====*/
-#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
-#define M32R_IRQ_I2C (28) /* I2C-BUS */
-#if 1
-#define PLD_IRQ_CFIREQ (40) /* CFC Card Interrupt */
-#define PLD_IRQ_CFC_INSERT (41) /* CFC Card Insert */
-#define PLD_IRQ_CFC_EJECT (42) /* CFC Card Eject */
-#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
-#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
-#else
-#define PLD_IRQ_CFIREQ (34) /* CFC Card Interrupt */
-#define PLD_IRQ_CFC_INSERT (35) /* CFC Card Insert */
-#define PLD_IRQ_CFC_EJECT (36) /* CFC Card Eject */
-#define PLD_IRQ_MMCCARD (37) /* MMC Card Insert */
-#define PLD_IRQ_MMCIRQ (38) /* MMC Transfer Done */
-#endif
-
-
-#if 0
-/* LED Control
- *
- * 1: DIP swich side
- * 2: Reset switch side
- */
-#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
-#define PLD_IOLED_1_ON 0x001
-#define PLD_IOLED_1_OFF 0x000
-#define PLD_IOLED_2_ON 0x002
-#define PLD_IOLED_2_OFF 0x000
-
-/* DIP Switch
- * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
- * 1: -
- * 2: -
- * 3: -
- */
-#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
-#define PLD_IOSWSTS_IOSW2 0x0200
-#define PLD_IOSWSTS_IOSW1 0x0100
-#define PLD_IOSWSTS_IOWP0 0x0001
-
-#endif
-
-/* CRC */
-#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
-#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
-#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
-#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
-#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
-#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
-
-
-#if 0
-/* RTC */
-#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
-#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
-#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
-#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
-#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
-
-/* SIO0 */
-#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
-#define PLD_ESIO0CR_TXEN 0x0001
-#define PLD_ESIO0CR_RXEN 0x0002
-#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
-#define PLD_ESIO0MOD0_CTSS 0x0040
-#define PLD_ESIO0MOD0_RTSS 0x0080
-#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
-#define PLD_ESIO0MOD1_LMFS 0x0010
-#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
-#define PLD_ESIO0STS_TEMP 0x0001
-#define PLD_ESIO0STS_TXCP 0x0002
-#define PLD_ESIO0STS_RXCP 0x0004
-#define PLD_ESIO0STS_TXSC 0x0100
-#define PLD_ESIO0STS_RXSC 0x0200
-#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
-#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
-#define PLD_ESIO0INTCR_TXIEN 0x0002
-#define PLD_ESIO0INTCR_RXCEN 0x0004
-#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
-#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
-#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
-
-/* SIM Card */
-#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
-#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
-#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
-#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
-#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
-#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
-#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
-
-#endif
-
-#endif /* _MAPPI2_PLD.H */
+++ /dev/null
-#ifndef _MAPPI3_PLD_H
-#define _MAPPI3_PLD_H
-
-/*
- * include/asm-m32r/mappi3/mappi3_pld.h
- *
- * Definitions for Extended IO Logic on MAPPI3 board.
- * based on m32700ut_pld.h
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef __ASSEMBLY__
-/* FIXME:
- * Some C functions use non-cache address, so can't define non-cache address.
- */
-#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */)
-#define __reg8 (volatile unsigned char *)
-#define __reg16 (volatile unsigned short *)
-#define __reg32 (volatile unsigned int *)
-#else
-#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET)
-#define __reg8
-#define __reg16
-#define __reg32
-#endif /* __ASSEMBLY__ */
-
-/* CFC */
-#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
-#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
-#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
-#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
-#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
-#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
-
-/* MMC */
-#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
-#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
-#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
-#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
-#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
-#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
-#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
-#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
-#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
-#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
-#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
-#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
-
-/* Power Control of MMC and CF */
-#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
-
-/* ICU */
-#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */
-#define M32R_IRQ_I2C (28) /* I2C-BUS */
-#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */
-#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert & Eject */
-#define PLD_IRQ_IDEIREQ (8) /* INT7 IDE Interrupt */
-#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */
-#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */
-
-#if 0
-/* LED Control
- *
- * 1: DIP swich side
- * 2: Reset switch side
- */
-#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
-#define PLD_IOLED_1_ON 0x001
-#define PLD_IOLED_1_OFF 0x000
-#define PLD_IOLED_2_ON 0x002
-#define PLD_IOLED_2_OFF 0x000
-
-/* DIP Switch
- * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
- * 1: -
- * 2: -
- * 3: -
- */
-#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
-#define PLD_IOSWSTS_IOSW2 0x0200
-#define PLD_IOSWSTS_IOSW1 0x0100
-#define PLD_IOSWSTS_IOWP0 0x0001
-
-#endif
-
-/* CRC */
-#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
-#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
-#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
-#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
-#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
-#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
-
-#if 0
-/* RTC */
-#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
-#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
-#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
-#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
-#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
-
-/* SIO0 */
-#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
-#define PLD_ESIO0CR_TXEN 0x0001
-#define PLD_ESIO0CR_RXEN 0x0002
-#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
-#define PLD_ESIO0MOD0_CTSS 0x0040
-#define PLD_ESIO0MOD0_RTSS 0x0080
-#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
-#define PLD_ESIO0MOD1_LMFS 0x0010
-#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
-#define PLD_ESIO0STS_TEMP 0x0001
-#define PLD_ESIO0STS_TXCP 0x0002
-#define PLD_ESIO0STS_RXCP 0x0004
-#define PLD_ESIO0STS_TXSC 0x0100
-#define PLD_ESIO0STS_RXSC 0x0200
-#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
-#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
-#define PLD_ESIO0INTCR_TXIEN 0x0002
-#define PLD_ESIO0INTCR_RXCEN 0x0004
-#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
-#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
-#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
-
-/* SIM Card */
-#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
-#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
-#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
-#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
-#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
-#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
-#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
-
-#endif
-
-/* Reset Control */
-#define PLD_REBOOT __reg16(PLD_BASE + 0x38000)
-
-#endif /* _MAPPI3_PLD.H */
+++ /dev/null
-/*
- * Machine dependent access functions for RTC registers.
- */
-#ifndef _ASM_MC146818RTC_H
-#define _ASM_MC146818RTC_H
-
-#include <asm/io.h>
-
-#ifndef RTC_PORT
-#define RTC_PORT(x) ((x))
-#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
-#endif
-
-/*
- * The yet supported machines all access the RTC index register via
- * an ISA port access but the way to access the date register differs ...
- */
-#define CMOS_READ(addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-inb_p(RTC_PORT(1)); \
-})
-#define CMOS_WRITE(val, addr) ({ \
-outb_p((addr),RTC_PORT(0)); \
-outb_p((val),RTC_PORT(1)); \
-})
-
-#define RTC_IRQ 8
-
-#endif /* _ASM_MC146818RTC_H */
+++ /dev/null
-#ifndef __M32R_MMAN_H__
-#define __M32R_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* __M32R_MMAN_H__ */
+++ /dev/null
-#ifndef _ASM_M32R_MMU_H
-#define _ASM_M32R_MMU_H
-
-#if !defined(CONFIG_MMU)
-
-typedef struct {
- unsigned long end_brk;
-} mm_context_t;
-
-#else /* CONFIG_MMU */
-
-/* Default "unsigned long" context */
-#ifndef CONFIG_SMP
-typedef unsigned long mm_context_t;
-#else
-typedef unsigned long mm_context_t[NR_CPUS];
-#endif
-
-#endif /* CONFIG_MMU */
-
-#endif /* _ASM_M32R_MMU_H */
+++ /dev/null
-#ifndef _ASM_M32R_MMU_CONTEXT_H
-#define _ASM_M32R_MMU_CONTEXT_H
-#ifdef __KERNEL__
-
-#include <asm/m32r.h>
-
-#define MMU_CONTEXT_ASID_MASK (0x000000FF)
-#define MMU_CONTEXT_VERSION_MASK (0xFFFFFF00)
-#define MMU_CONTEXT_FIRST_VERSION (0x00000100)
-#define NO_CONTEXT (0x00000000)
-
-#ifndef __ASSEMBLY__
-
-#include <asm/atomic.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu.h>
-#include <asm/tlbflush.h>
-#include <asm-generic/mm_hooks.h>
-
-/*
- * Cache of MMU context last used.
- */
-#ifndef CONFIG_SMP
-extern unsigned long mmu_context_cache_dat;
-#define mmu_context_cache mmu_context_cache_dat
-#define mm_context(mm) mm->context
-#else /* not CONFIG_SMP */
-extern unsigned long mmu_context_cache_dat[];
-#define mmu_context_cache mmu_context_cache_dat[smp_processor_id()]
-#define mm_context(mm) mm->context[smp_processor_id()]
-#endif /* not CONFIG_SMP */
-
-#define set_tlb_tag(entry, tag) (*entry = (tag & PAGE_MASK)|get_asid())
-#define set_tlb_data(entry, data) (*entry = (data | _PAGE_PRESENT))
-
-#ifdef CONFIG_MMU
-#define enter_lazy_tlb(mm, tsk) do { } while (0)
-
-static inline void get_new_mmu_context(struct mm_struct *mm)
-{
- unsigned long mc = ++mmu_context_cache;
-
- if (!(mc & MMU_CONTEXT_ASID_MASK)) {
- /* We exhaust ASID of this version.
- Flush all TLB and start new cycle. */
- local_flush_tlb_all();
- /* Fix version if needed.
- Note that we avoid version #0 to distingush NO_CONTEXT. */
- if (!mc)
- mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
- }
- mm_context(mm) = mc;
-}
-
-/*
- * Get MMU context if needed.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
- if (mm) {
- unsigned long mc = mmu_context_cache;
-
- /* Check if we have old version of context.
- If it's old, we need to get new context with new version. */
- if ((mm_context(mm) ^ mc) & MMU_CONTEXT_VERSION_MASK)
- get_new_mmu_context(mm);
- }
-}
-
-/*
- * Initialize the context related info for a new mm_struct
- * instance.
- */
-static inline int init_new_context(struct task_struct *tsk,
- struct mm_struct *mm)
-{
-#ifndef CONFIG_SMP
- mm->context = NO_CONTEXT;
-#else /* CONFIG_SMP */
- int num_cpus = num_online_cpus();
- int i;
-
- for (i = 0 ; i < num_cpus ; i++)
- mm->context[i] = NO_CONTEXT;
-#endif /* CONFIG_SMP */
-
- return 0;
-}
-
-/*
- * Destroy context related info for an mm_struct that is about
- * to be put to rest.
- */
-#define destroy_context(mm) do { } while (0)
-
-static inline void set_asid(unsigned long asid)
-{
- *(volatile unsigned long *)MASID = (asid & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline unsigned long get_asid(void)
-{
- unsigned long asid;
-
- asid = *(volatile long *)MASID;
- asid &= MMU_CONTEXT_ASID_MASK;
-
- return asid;
-}
-
-/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm)
-{
- get_mmu_context(mm);
- set_asid(mm_context(mm) & MMU_CONTEXT_ASID_MASK);
-}
-
-static inline void switch_mm(struct mm_struct *prev,
- struct mm_struct *next, struct task_struct *tsk)
-{
-#ifdef CONFIG_SMP
- int cpu = smp_processor_id();
-#endif /* CONFIG_SMP */
-
- if (prev != next) {
-#ifdef CONFIG_SMP
- cpu_set(cpu, next->cpu_vm_mask);
-#endif /* CONFIG_SMP */
- /* Set MPTB = next->pgd */
- *(volatile unsigned long *)MPTB = (unsigned long)next->pgd;
- activate_context(next);
- }
-#ifdef CONFIG_SMP
- else
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
- activate_context(next);
-#endif /* CONFIG_SMP */
-}
-
-#define deactivate_mm(tsk, mm) do { } while (0)
-
-#define activate_mm(prev, next) \
- switch_mm((prev), (next), NULL)
-
-#else /* not CONFIG_MMU */
-#define get_mmu_context(mm) do { } while (0)
-#define init_new_context(tsk,mm) (0)
-#define destroy_context(mm) do { } while (0)
-#define set_asid(asid) do { } while (0)
-#define get_asid() (0)
-#define activate_context(mm) do { } while (0)
-#define switch_mm(prev,next,tsk) do { } while (0)
-#define deactivate_mm(mm,tsk) do { } while (0)
-#define activate_mm(prev,next) do { } while (0)
-#define enter_lazy_tlb(mm,tsk) do { } while (0)
-#endif /* not CONFIG_MMU */
-
-#endif /* not __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M32R_MMU_CONTEXT_H */
+++ /dev/null
-/*
- * Written by Pat Gaughen (gone@us.ibm.com) Mar 2002
- *
- */
-
-#ifndef _ASM_MMZONE_H_
-#define _ASM_MMZONE_H_
-
-#include <asm/smp.h>
-
-#ifdef CONFIG_DISCONTIGMEM
-
-extern struct pglist_data *node_data[];
-#define NODE_DATA(nid) (node_data[nid])
-
-#define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn)
-#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
-#define node_end_pfn(nid) \
-({ \
- pg_data_t *__pgdat = NODE_DATA(nid); \
- __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \
-})
-
-#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
-/*
- * pfn_valid should be made as fast as possible, and the current definition
- * is valid for machines that are NUMA, but still contiguous, which is what
- * is currently supported. A more generalised, but slower definition would
- * be something like this - mbligh:
- * ( pfn_to_pgdat(pfn) && ((pfn) < node_end_pfn(pfn_to_nid(pfn))) )
- */
-#if 1 /* M32R_FIXME */
-#define pfn_valid(pfn) (1)
-#else
-#define pfn_valid(pfn) ((pfn) < num_physpages)
-#endif
-
-/*
- * generic node memory support, the following assumptions apply:
- */
-
-static __inline__ int pfn_to_nid(unsigned long pfn)
-{
- int node;
-
- for (node = 0 ; node < MAX_NUMNODES ; node++)
- if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node))
- break;
-
- return node;
-}
-
-static __inline__ struct pglist_data *pfn_to_pgdat(unsigned long pfn)
-{
- return(NODE_DATA(pfn_to_nid(pfn)));
-}
-
-#endif /* CONFIG_DISCONTIGMEM */
-#endif /* _ASM_MMZONE_H_ */
+++ /dev/null
-#ifndef _ASM_M32R_MODULE_H
-#define _ASM_M32R_MODULE_H
-
-struct mod_arch_specific { };
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-#endif /* _ASM_M32R_MODULE_H */
+++ /dev/null
-#ifndef _ASM_M32R_MSGBUF_H
-#define _ASM_M32R_MSGBUF_H
-
-/*
- * The msqid64_ds structure for m32r architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_M32R_MSGBUF_H */
+++ /dev/null
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
+++ /dev/null
-#ifndef _OPSPUT_OPSPUT_LAN_H
-#define _OPSPUT_OPSPUT_LAN_H
-
-/*
- * include/asm-m32r/opsput/opsput_lan.h
- *
- * OPSPUT-LAN board
- *
- * Copyright (c) 2002-2004 Takeo Takahashi, Mamoru Sakugawa
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define OPSPUT_LAN_BASE (0x10000000 /* + NONCACHE_OFFSET */)
-#else
-#define OPSPUT_LAN_BASE (0x10000000 + NONCACHE_OFFSET)
-#endif /* __ASSEMBLY__ */
-
-/* ICU
- * ICUISTS: status register
- * ICUIREQ0: request register
- * ICUIREQ1: request register
- * ICUCR3: control register for CFIREQ# interrupt
- * ICUCR4: control register for CFC Card insert interrupt
- * ICUCR5: control register for CFC Card eject interrupt
- * ICUCR6: control register for external interrupt
- * ICUCR11: control register for MMC Card insert/eject interrupt
- * ICUCR13: control register for SC error interrupt
- * ICUCR14: control register for SC receive interrupt
- * ICUCR15: control register for SC send interrupt
- * ICUCR16: control register for SIO0 receive interrupt
- * ICUCR17: control register for SIO0 send interrupt
- */
-#define OPSPUT_LAN_IRQ_LAN (OPSPUT_LAN_PLD_IRQ_BASE + 1) /* LAN */
-#define OPSPUT_LAN_IRQ_I2C (OPSPUT_LAN_PLD_IRQ_BASE + 3) /* I2C */
-
-#define OPSPUT_LAN_ICUISTS __reg16(OPSPUT_LAN_BASE + 0xc0002)
-#define OPSPUT_LAN_ICUISTS_VECB_MASK (0xf000)
-#define OPSPUT_LAN_VECB(x) ((x) & OPSPUT_LAN_ICUISTS_VECB_MASK)
-#define OPSPUT_LAN_ICUISTS_ISN_MASK (0x07c0)
-#define OPSPUT_LAN_ICUISTS_ISN(x) ((x) & OPSPUT_LAN_ICUISTS_ISN_MASK)
-#define OPSPUT_LAN_ICUIREQ0 __reg16(OPSPUT_LAN_BASE + 0xc0004)
-#define OPSPUT_LAN_ICUCR1 __reg16(OPSPUT_LAN_BASE + 0xc0010)
-#define OPSPUT_LAN_ICUCR3 __reg16(OPSPUT_LAN_BASE + 0xc0014)
-
-#endif /* _OPSPUT_OPSPUT_LAN_H */
+++ /dev/null
-#ifndef _OPSPUT_OPSPUT_LCD_H
-#define _OPSPUT_OPSPUT_LCD_H
-
-/*
- * include/asm-m32r/opsput/opsput_lcd.h
- *
- * OPSPUT-LCD board
- *
- * Copyright (c) 2002 Takeo Takahashi
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define OPSPUT_LCD_BASE (0x10000000 /* + NONCACHE_OFFSET */)
-#else
-#define OPSPUT_LCD_BASE (0x10000000 + NONCACHE_OFFSET)
-#endif /* __ASSEMBLY__ */
-
-/*
- * ICU
- */
-#define OPSPUT_LCD_IRQ_BAT_INT (OPSPUT_LCD_PLD_IRQ_BASE + 1)
-#define OPSPUT_LCD_IRQ_USB_INT1 (OPSPUT_LCD_PLD_IRQ_BASE + 2)
-#define OPSPUT_LCD_IRQ_AUDT0 (OPSPUT_LCD_PLD_IRQ_BASE + 3)
-#define OPSPUT_LCD_IRQ_AUDT2 (OPSPUT_LCD_PLD_IRQ_BASE + 4)
-#define OPSPUT_LCD_IRQ_BATSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 16)
-#define OPSPUT_LCD_IRQ_BATSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 17)
-#define OPSPUT_LCD_IRQ_ASNDSIO_RCV (OPSPUT_LCD_PLD_IRQ_BASE + 18)
-#define OPSPUT_LCD_IRQ_ASNDSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 19)
-#define OPSPUT_LCD_IRQ_ACNLSIO_SND (OPSPUT_LCD_PLD_IRQ_BASE + 21)
-
-#define OPSPUT_LCD_ICUISTS __reg16(OPSPUT_LCD_BASE + 0x300002)
-#define OPSPUT_LCD_ICUISTS_VECB_MASK (0xf000)
-#define OPSPUT_LCD_VECB(x) ((x) & OPSPUT_LCD_ICUISTS_VECB_MASK)
-#define OPSPUT_LCD_ICUISTS_ISN_MASK (0x07c0)
-#define OPSPUT_LCD_ICUISTS_ISN(x) ((x) & OPSPUT_LCD_ICUISTS_ISN_MASK)
-#define OPSPUT_LCD_ICUIREQ0 __reg16(OPSPUT_LCD_BASE + 0x300004)
-#define OPSPUT_LCD_ICUIREQ1 __reg16(OPSPUT_LCD_BASE + 0x300006)
-#define OPSPUT_LCD_ICUCR1 __reg16(OPSPUT_LCD_BASE + 0x300020)
-#define OPSPUT_LCD_ICUCR2 __reg16(OPSPUT_LCD_BASE + 0x300022)
-#define OPSPUT_LCD_ICUCR3 __reg16(OPSPUT_LCD_BASE + 0x300024)
-#define OPSPUT_LCD_ICUCR4 __reg16(OPSPUT_LCD_BASE + 0x300026)
-#define OPSPUT_LCD_ICUCR16 __reg16(OPSPUT_LCD_BASE + 0x300030)
-#define OPSPUT_LCD_ICUCR17 __reg16(OPSPUT_LCD_BASE + 0x300032)
-#define OPSPUT_LCD_ICUCR18 __reg16(OPSPUT_LCD_BASE + 0x300034)
-#define OPSPUT_LCD_ICUCR19 __reg16(OPSPUT_LCD_BASE + 0x300036)
-#define OPSPUT_LCD_ICUCR21 __reg16(OPSPUT_LCD_BASE + 0x30003a)
-
-#endif /* _OPSPUT_OPSPUT_LCD_H */
+++ /dev/null
-#ifndef _OPSPUT_OPSPUT_PLD_H
-#define _OPSPUT_OPSPUT_PLD_H
-
-/*
- * include/asm-m32r/opsput/opsput_pld.h
- *
- * Definitions for Programable Logic Device(PLD) on OPSPUT board.
- *
- * Copyright (c) 2002 Takeo Takahashi
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file "COPYING" in the main directory of
- * this archive for more details.
- */
-
-#define PLD_PLAT_BASE 0x1cc00000
-
-#ifndef __ASSEMBLY__
-/*
- * C functions use non-cache address.
- */
-#define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
-#define __reg8 (volatile unsigned char *)
-#define __reg16 (volatile unsigned short *)
-#define __reg32 (volatile unsigned int *)
-#else
-#define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
-#define __reg8
-#define __reg16
-#define __reg32
-#endif /* __ASSEMBLY__ */
-
-/* CFC */
-#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
-#define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
-#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
-#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
-#define PLD_CFVENCR __reg16(PLD_BASE + 0x0008)
-#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a)
-#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c)
-#define PLD_IDERSTCR __reg16(PLD_BASE + 0x0010)
-
-/* MMC */
-#define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
-#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
-#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
-#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
-#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
-#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
-#define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
-#define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
-#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
-#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
-#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
-#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
-
-/* ICU
- * ICUISTS: status register
- * ICUIREQ0: request register
- * ICUIREQ1: request register
- * ICUCR3: control register for CFIREQ# interrupt
- * ICUCR4: control register for CFC Card insert interrupt
- * ICUCR5: control register for CFC Card eject interrupt
- * ICUCR6: control register for external interrupt
- * ICUCR11: control register for MMC Card insert/eject interrupt
- * ICUCR13: control register for SC error interrupt
- * ICUCR14: control register for SC receive interrupt
- * ICUCR15: control register for SC send interrupt
- * ICUCR16: control register for SIO0 receive interrupt
- * ICUCR17: control register for SIO0 send interrupt
- */
-#if !defined(CONFIG_PLAT_USRV)
-#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */
-#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */
-#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */
-#define PLD_IRQ_CFIREQ (OPSPUT_PLD_IRQ_BASE + 3) /* CF IREQ */
-#define PLD_IRQ_CFC_INSERT (OPSPUT_PLD_IRQ_BASE + 4) /* CF Insert */
-#define PLD_IRQ_CFC_EJECT (OPSPUT_PLD_IRQ_BASE + 5) /* CF Eject */
-#define PLD_IRQ_EXINT (OPSPUT_PLD_IRQ_BASE + 6) /* EXINT */
-#define PLD_IRQ_INT7 (OPSPUT_PLD_IRQ_BASE + 7) /* reserved */
-#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */
-#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */
-#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */
-#define PLD_IRQ_MMCCARD (OPSPUT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
-#define PLD_IRQ_INT12 (OPSPUT_PLD_IRQ_BASE + 12) /* reserved */
-#define PLD_IRQ_SC_ERROR (OPSPUT_PLD_IRQ_BASE + 13) /* SC error */
-#define PLD_IRQ_SC_RCV (OPSPUT_PLD_IRQ_BASE + 14) /* SC receive */
-#define PLD_IRQ_SC_SND (OPSPUT_PLD_IRQ_BASE + 15) /* SC send */
-#define PLD_IRQ_SIO0_RCV (OPSPUT_PLD_IRQ_BASE + 16) /* SIO receive */
-#define PLD_IRQ_SIO0_SND (OPSPUT_PLD_IRQ_BASE + 17) /* SIO send */
-#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */
-#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */
-#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */
-#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */
-#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */
-#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */
-#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */
-#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */
-#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */
-#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */
-#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */
-#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */
-#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */
-#define PLD_IRQ_INT31 (OPSPUT_PLD_IRQ_BASE + 31) /* reserved */
-
-#else /* CONFIG_PLAT_USRV */
-
-#define PLD_IRQ_INT0 (OPSPUT_PLD_IRQ_BASE + 0) /* None */
-#define PLD_IRQ_INT1 (OPSPUT_PLD_IRQ_BASE + 1) /* reserved */
-#define PLD_IRQ_INT2 (OPSPUT_PLD_IRQ_BASE + 2) /* reserved */
-#define PLD_IRQ_CF0 (OPSPUT_PLD_IRQ_BASE + 3) /* CF0# */
-#define PLD_IRQ_CF1 (OPSPUT_PLD_IRQ_BASE + 4) /* CF1# */
-#define PLD_IRQ_CF2 (OPSPUT_PLD_IRQ_BASE + 5) /* CF2# */
-#define PLD_IRQ_CF3 (OPSPUT_PLD_IRQ_BASE + 6) /* CF3# */
-#define PLD_IRQ_CF4 (OPSPUT_PLD_IRQ_BASE + 7) /* CF4# */
-#define PLD_IRQ_INT8 (OPSPUT_PLD_IRQ_BASE + 8) /* reserved */
-#define PLD_IRQ_INT9 (OPSPUT_PLD_IRQ_BASE + 9) /* reserved */
-#define PLD_IRQ_INT10 (OPSPUT_PLD_IRQ_BASE + 10) /* reserved */
-#define PLD_IRQ_INT11 (OPSPUT_PLD_IRQ_BASE + 11) /* reserved */
-#define PLD_IRQ_UART0 (OPSPUT_PLD_IRQ_BASE + 12) /* UARTIRQ0 */
-#define PLD_IRQ_UART1 (OPSPUT_PLD_IRQ_BASE + 13) /* UARTIRQ1 */
-#define PLD_IRQ_INT14 (OPSPUT_PLD_IRQ_BASE + 14) /* reserved */
-#define PLD_IRQ_INT15 (OPSPUT_PLD_IRQ_BASE + 15) /* reserved */
-#define PLD_IRQ_SNDINT (OPSPUT_PLD_IRQ_BASE + 16) /* SNDINT# */
-#define PLD_IRQ_INT17 (OPSPUT_PLD_IRQ_BASE + 17) /* reserved */
-#define PLD_IRQ_INT18 (OPSPUT_PLD_IRQ_BASE + 18) /* reserved */
-#define PLD_IRQ_INT19 (OPSPUT_PLD_IRQ_BASE + 19) /* reserved */
-#define PLD_IRQ_INT20 (OPSPUT_PLD_IRQ_BASE + 20) /* reserved */
-#define PLD_IRQ_INT21 (OPSPUT_PLD_IRQ_BASE + 21) /* reserved */
-#define PLD_IRQ_INT22 (OPSPUT_PLD_IRQ_BASE + 22) /* reserved */
-#define PLD_IRQ_INT23 (OPSPUT_PLD_IRQ_BASE + 23) /* reserved */
-#define PLD_IRQ_INT24 (OPSPUT_PLD_IRQ_BASE + 24) /* reserved */
-#define PLD_IRQ_INT25 (OPSPUT_PLD_IRQ_BASE + 25) /* reserved */
-#define PLD_IRQ_INT26 (OPSPUT_PLD_IRQ_BASE + 26) /* reserved */
-#define PLD_IRQ_INT27 (OPSPUT_PLD_IRQ_BASE + 27) /* reserved */
-#define PLD_IRQ_INT28 (OPSPUT_PLD_IRQ_BASE + 28) /* reserved */
-#define PLD_IRQ_INT29 (OPSPUT_PLD_IRQ_BASE + 29) /* reserved */
-#define PLD_IRQ_INT30 (OPSPUT_PLD_IRQ_BASE + 30) /* reserved */
-
-#endif /* CONFIG_PLAT_USRV */
-
-#define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
-#define PLD_ICUISTS_VECB_MASK (0xf000)
-#define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
-#define PLD_ICUISTS_ISN_MASK (0x07c0)
-#define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
-#define PLD_ICUIREQ0 __reg16(PLD_BASE + 0x8004)
-#define PLD_ICUIREQ1 __reg16(PLD_BASE + 0x8006)
-#define PLD_ICUCR1 __reg16(PLD_BASE + 0x8100)
-#define PLD_ICUCR2 __reg16(PLD_BASE + 0x8102)
-#define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
-#define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
-#define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
-#define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
-#define PLD_ICUCR7 __reg16(PLD_BASE + 0x810c)
-#define PLD_ICUCR8 __reg16(PLD_BASE + 0x810e)
-#define PLD_ICUCR9 __reg16(PLD_BASE + 0x8110)
-#define PLD_ICUCR10 __reg16(PLD_BASE + 0x8112)
-#define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
-#define PLD_ICUCR12 __reg16(PLD_BASE + 0x8116)
-#define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
-#define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
-#define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
-#define PLD_ICUCR16 __reg16(PLD_BASE + 0x811e)
-#define PLD_ICUCR17 __reg16(PLD_BASE + 0x8120)
-#define PLD_ICUCR_IEN (0x1000)
-#define PLD_ICUCR_IREQ (0x0100)
-#define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
-#define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
-#define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
-#define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
-#define PLD_ICUCR_ILEVEL0 (0x0000)
-#define PLD_ICUCR_ILEVEL1 (0x0001)
-#define PLD_ICUCR_ILEVEL2 (0x0002)
-#define PLD_ICUCR_ILEVEL3 (0x0003)
-#define PLD_ICUCR_ILEVEL4 (0x0004)
-#define PLD_ICUCR_ILEVEL5 (0x0005)
-#define PLD_ICUCR_ILEVEL6 (0x0006)
-#define PLD_ICUCR_ILEVEL7 (0x0007)
-
-/* Power Control of MMC and CF */
-#define PLD_CPCR __reg16(PLD_BASE + 0x14000)
-#define PLD_CPCR_CF 0x0001
-#define PLD_CPCR_MMC 0x0002
-
-/* LED Control
- *
- * 1: DIP swich side
- * 2: Reset switch side
- */
-#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
-#define PLD_IOLED_1_ON 0x001
-#define PLD_IOLED_1_OFF 0x000
-#define PLD_IOLED_2_ON 0x002
-#define PLD_IOLED_2_OFF 0x000
-
-/* DIP Switch
- * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
- * 1: -
- * 2: -
- * 3: -
- */
-#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
-#define PLD_IOSWSTS_IOSW2 0x0200
-#define PLD_IOSWSTS_IOSW1 0x0100
-#define PLD_IOSWSTS_IOWP0 0x0001
-
-/* CRC */
-#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
-#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
-#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
-#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
-#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
-#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
-
-/* RTC */
-#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
-#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
-#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
-#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
-#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
-
-/* SIO0 */
-#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000)
-#define PLD_ESIO0CR_TXEN 0x0001
-#define PLD_ESIO0CR_RXEN 0x0002
-#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002)
-#define PLD_ESIO0MOD0_CTSS 0x0040
-#define PLD_ESIO0MOD0_RTSS 0x0080
-#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004)
-#define PLD_ESIO0MOD1_LMFS 0x0010
-#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006)
-#define PLD_ESIO0STS_TEMP 0x0001
-#define PLD_ESIO0STS_TXCP 0x0002
-#define PLD_ESIO0STS_RXCP 0x0004
-#define PLD_ESIO0STS_TXSC 0x0100
-#define PLD_ESIO0STS_RXSC 0x0200
-#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP)
-#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008)
-#define PLD_ESIO0INTCR_TXIEN 0x0002
-#define PLD_ESIO0INTCR_RXCEN 0x0004
-#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a)
-#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c)
-#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e)
-
-/* SIM Card */
-#define PLD_SCCR __reg16(PLD_BASE + 0x38000)
-#define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
-#define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
-#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
-#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
-#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
-#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
-
-#endif /* _OPSPUT_OPSPUT_PLD.H */
+++ /dev/null
-#ifndef _ASM_M32R_PAGE_H
-#define _ASM_M32R_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-extern void clear_page(void *to);
-extern void copy_page(void *to, void *from);
-
-#define clear_user_page(page, vaddr, pg) clear_page(page)
-#define copy_user_page(to, from, vaddr, pg) copy_page(to, from)
-
-#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
- alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
-#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-#define pte_val(x) ((x).pte)
-#define PTE_MASK PAGE_MASK
-
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pmd_val(x) ((x).pmd)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * This handles the memory map.. We could make this a config
- * option, but too many people screw it up, and too few need
- * it.
- *
- * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
- * a virtual address space of one gigabyte, which limits the
- * amount of physical memory you can use to about 950MB.
- *
- * If you want more physical memory than this then see the CONFIG_HIGHMEM4G
- * and CONFIG_HIGHMEM64G options in the kernel configuration.
- */
-
-#define __MEMORY_START CONFIG_MEMORY_START
-#define __MEMORY_SIZE CONFIG_MEMORY_SIZE
-
-#ifdef CONFIG_MMU
-#define __PAGE_OFFSET (0x80000000)
-#else
-#define __PAGE_OFFSET (0x00000000)
-#endif
-
-#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET)
-#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET)
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
-
-#ifndef CONFIG_DISCONTIGMEM
-#define PFN_BASE (CONFIG_MEMORY_START >> PAGE_SHIFT)
-#define ARCH_PFN_OFFSET PFN_BASE
-#define pfn_valid(pfn) (((pfn) - PFN_BASE) < max_mapnr)
-#endif /* !CONFIG_DISCONTIGMEM */
-
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC )
-
-#define devmem_is_allowed(x) 1
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* _ASM_M32R_PAGE_H */
+++ /dev/null
-#ifndef _ASM_M32R_PARAM_H
-#define _ASM_M32R_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in "ticks" */
-# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#endif /* _ASM_M32R_PARAM_H */
-
+++ /dev/null
-#ifndef _ASM_M32R_PCI_H
-#define _ASM_M32R_PCI_H
-
-#include <asm-generic/pci.h>
-
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-#endif /* _ASM_M32R_PCI_H */
+++ /dev/null
-#ifndef __ARCH_M32R_PERCPU__
-#define __ARCH_M32R_PERCPU__
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_M32R_PERCPU__ */
+++ /dev/null
-#ifndef _ASM_M32R_PGALLOC_H
-#define _ASM_M32R_PGALLOC_H
-
-#include <linux/mm.h>
-
-#include <asm/io.h>
-
-#define pmd_populate_kernel(mm, pmd, pte) \
- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
-
-static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
- pgtable_t pte)
-{
- set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-/*
- * Allocate and free page tables.
- */
-static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
-{
- pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
-
- return pgd;
-}
-
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
- free_page((unsigned long)pgd);
-}
-
-static __inline__ pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
- unsigned long address)
-{
- pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_ZERO);
-
- return pte;
-}
-
-static __inline__ pgtable_t pte_alloc_one(struct mm_struct *mm,
- unsigned long address)
-{
- struct page *pte = alloc_page(GFP_KERNEL|__GFP_ZERO);
-
- pgtable_page_ctor(pte);
- return pte;
-}
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
- free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
-{
- pgtable_page_dtor(pte);
- __free_page(pte);
-}
-
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- * (In the PAE case we free the pmds as part of the pgd.)
- */
-
-#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *)2); })
-#define pmd_free(mm, x) do { } while (0)
-#define __pmd_free_tlb(tlb, x) do { } while (0)
-#define pgd_populate(mm, pmd, pte) BUG()
-
-#define check_pgt_cache() do { } while (0)
-
-#endif /* _ASM_M32R_PGALLOC_H */
+++ /dev/null
-#ifndef _ASM_M32R_PGTABLE_2LEVEL_H
-#define _ASM_M32R_PGTABLE_2LEVEL_H
-#ifdef __KERNEL__
-
-/*
- * traditional M32R two-level paging structure:
- */
-
-#define PGDIR_SHIFT 22
-#define PTRS_PER_PGD 1024
-
-/*
- * the M32R is two-level, so we don't really have any
- * PMD directory physically.
- */
-#define PMD_SHIFT 22
-#define PTRS_PER_PMD 1
-
-#define PTRS_PER_PTE 1024
-
-#define pte_ERROR(e) \
- printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
-#define pgd_ERROR(e) \
- printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-#define pgd_clear(xp) do { } while (0)
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-
-/*
- * (pmds are folded into pgds so this doesnt get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-#define set_pgd(pgdptr, pgdval) (*(pgdptr) = pgdval)
-
-#define pgd_page_vaddr(pgd) \
-((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
-
-#ifndef CONFIG_DISCONTIGMEM
-#define pgd_page(pgd) (mem_map + ((pgd_val(pgd) >> PAGE_SHIFT) - PFN_BASE))
-#endif /* !CONFIG_DISCONTIGMEM */
-
-static inline pmd_t *pmd_offset(pgd_t * dir, unsigned long address)
-{
- return (pmd_t *) dir;
-}
-
-#define ptep_get_and_clear(mm,addr,xp) __pte(xchg(&(xp)->pte, 0))
-#define pte_same(a, b) (pte_val(a) == pte_val(b))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define pte_none(x) (!pte_val(x))
-#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
-
-#define PTE_FILE_MAX_BITS 29
-#define pte_to_pgoff(pte) (((pte_val(pte) >> 2) & 0x7f) | (((pte_val(pte) >> 10)) << 7))
-#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7f) << 2) | (((off) >> 7) << 10) | _PAGE_FILE })
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M32R_PGTABLE_2LEVEL_H */
+++ /dev/null
-#ifndef _ASM_M32R_PGTABLE_H
-#define _ASM_M32R_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#ifdef __KERNEL__
-/*
- * The Linux memory management assumes a three-level page table setup. On
- * the M32R, we use that, but "fold" the mid level into the top-level page
- * table, so that we physically have the same two-level page table as the
- * M32R mmu expects.
- *
- * This file contains the functions and defines necessary to modify and use
- * the M32R page table tree.
- */
-
-/* CAUTION!: If you change macro definitions in this file, you might have to
- * change arch/m32r/mmu.S manually.
- */
-
-#ifndef __ASSEMBLY__
-
-#include <linux/threads.h>
-#include <linux/bitops.h>
-#include <asm/processor.h>
-#include <asm/addrspace.h>
-#include <asm/page.h>
-
-struct mm_struct;
-struct vm_area_struct;
-
-extern pgd_t swapper_pg_dir[1024];
-extern void paging_init(void);
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern unsigned long empty_zero_page[1024];
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-
-#endif /* !__ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-#include <asm/pgtable-2level.h>
-#endif
-
-#define pgtable_cache_init() do { } while (0)
-
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE - 1))
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-
-#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
-
-#ifndef __ASSEMBLY__
-/* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts. That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- */
-#define VMALLOC_START KSEG2
-#define VMALLOC_END KSEG3
-
-/*
- * M32R TLB format
- *
- * [0] [1:19] [20:23] [24:31]
- * +-----------------------+----+-------------+
- * | VPN |0000| ASID |
- * +-----------------------+----+-------------+
- * +-+---------------------+----+-+---+-+-+-+-+
- * |0 PPN |0000|N|AC |L|G|V| |
- * +-+---------------------+----+-+---+-+-+-+-+
- * RWX
- */
-
-#define _PAGE_BIT_DIRTY 0 /* software: page changed */
-#define _PAGE_BIT_FILE 0 /* when !present: nonlinear file
- mapping */
-#define _PAGE_BIT_PRESENT 1 /* Valid: page is valid */
-#define _PAGE_BIT_GLOBAL 2 /* Global */
-#define _PAGE_BIT_LARGE 3 /* Large */
-#define _PAGE_BIT_EXEC 4 /* Execute */
-#define _PAGE_BIT_WRITE 5 /* Write */
-#define _PAGE_BIT_READ 6 /* Read */
-#define _PAGE_BIT_NONCACHABLE 7 /* Non cachable */
-#define _PAGE_BIT_ACCESSED 8 /* software: page referenced */
-#define _PAGE_BIT_PROTNONE 9 /* software: if not present */
-
-#define _PAGE_DIRTY (1UL << _PAGE_BIT_DIRTY)
-#define _PAGE_FILE (1UL << _PAGE_BIT_FILE)
-#define _PAGE_PRESENT (1UL << _PAGE_BIT_PRESENT)
-#define _PAGE_GLOBAL (1UL << _PAGE_BIT_GLOBAL)
-#define _PAGE_LARGE (1UL << _PAGE_BIT_LARGE)
-#define _PAGE_EXEC (1UL << _PAGE_BIT_EXEC)
-#define _PAGE_WRITE (1UL << _PAGE_BIT_WRITE)
-#define _PAGE_READ (1UL << _PAGE_BIT_READ)
-#define _PAGE_NONCACHABLE (1UL << _PAGE_BIT_NONCACHABLE)
-#define _PAGE_ACCESSED (1UL << _PAGE_BIT_ACCESSED)
-#define _PAGE_PROTNONE (1UL << _PAGE_BIT_PROTNONE)
-
-#define _PAGE_TABLE \
- ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \
- | _PAGE_DIRTY )
-#define _KERNPG_TABLE \
- ( _PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED \
- | _PAGE_DIRTY )
-#define _PAGE_CHG_MASK \
- ( PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY )
-
-#ifdef CONFIG_MMU
-#define PAGE_NONE \
- __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
-#define PAGE_SHARED \
- __pgprot(_PAGE_PRESENT | _PAGE_WRITE | _PAGE_READ | _PAGE_ACCESSED)
-#define PAGE_SHARED_EXEC \
- __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ \
- | _PAGE_ACCESSED)
-#define PAGE_COPY \
- __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)
-#define PAGE_COPY_EXEC \
- __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED)
-#define PAGE_READONLY \
- __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_ACCESSED)
-#define PAGE_READONLY_EXEC \
- __pgprot(_PAGE_PRESENT | _PAGE_EXEC | _PAGE_READ | _PAGE_ACCESSED)
-
-#define __PAGE_KERNEL \
- ( _PAGE_PRESENT | _PAGE_EXEC | _PAGE_WRITE | _PAGE_READ | _PAGE_DIRTY \
- | _PAGE_ACCESSED )
-#define __PAGE_KERNEL_RO ( __PAGE_KERNEL & ~_PAGE_WRITE )
-#define __PAGE_KERNEL_NOCACHE ( __PAGE_KERNEL | _PAGE_NONCACHABLE)
-
-#define MAKE_GLOBAL(x) __pgprot((x) | _PAGE_GLOBAL)
-
-#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
-
-#else
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_SHARED_EXEC __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_COPY_EXEC __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_READONLY_EXEC __pgprot(0)
-
-#define PAGE_KERNEL __pgprot(0)
-#define PAGE_KERNEL_RO __pgprot(0)
-#define PAGE_KERNEL_NOCACHE __pgprot(0)
-#endif /* CONFIG_MMU */
-
- /* xwr */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY
-#define __P010 PAGE_COPY
-#define __P011 PAGE_COPY
-#define __P100 PAGE_READONLY_EXEC
-#define __P101 PAGE_READONLY_EXEC
-#define __P110 PAGE_COPY_EXEC
-#define __P111 PAGE_COPY_EXEC
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY
-#define __S010 PAGE_SHARED
-#define __S011 PAGE_SHARED
-#define __S100 PAGE_READONLY_EXEC
-#define __S101 PAGE_READONLY_EXEC
-#define __S110 PAGE_SHARED_EXEC
-#define __S111 PAGE_SHARED_EXEC
-
-/* page table for 0-4MB for everybody */
-
-#define pte_present(x) (pte_val(x) & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
-
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK) != _KERNPG_TABLE)
-
-#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_dirty(pte_t pte)
-{
- return pte_val(pte) & _PAGE_DIRTY;
-}
-
-static inline int pte_young(pte_t pte)
-{
- return pte_val(pte) & _PAGE_ACCESSED;
-}
-
-static inline int pte_write(pte_t pte)
-{
- return pte_val(pte) & _PAGE_WRITE;
-}
-
-/*
- * The following only works if pte_present() is not true.
- */
-static inline int pte_file(pte_t pte)
-{
- return pte_val(pte) & _PAGE_FILE;
-}
-
-static inline int pte_special(pte_t pte)
-{
- return 0;
-}
-
-static inline pte_t pte_mkclean(pte_t pte)
-{
- pte_val(pte) &= ~_PAGE_DIRTY;
- return pte;
-}
-
-static inline pte_t pte_mkold(pte_t pte)
-{
- pte_val(pte) &= ~_PAGE_ACCESSED;
- return pte;
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
- pte_val(pte) &= ~_PAGE_WRITE;
- return pte;
-}
-
-static inline pte_t pte_mkdirty(pte_t pte)
-{
- pte_val(pte) |= _PAGE_DIRTY;
- return pte;
-}
-
-static inline pte_t pte_mkyoung(pte_t pte)
-{
- pte_val(pte) |= _PAGE_ACCESSED;
- return pte;
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)
-{
- pte_val(pte) |= _PAGE_WRITE;
- return pte;
-}
-
-static inline pte_t pte_mkspecial(pte_t pte)
-{
- return pte;
-}
-
-static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
-{
- return test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep);
-}
-
-static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- clear_bit(_PAGE_BIT_WRITE, ptep);
-}
-
-/*
- * Macro and implementation to make a page protection as uncachable.
- */
-static inline pgprot_t pgprot_noncached(pgprot_t _prot)
-{
- unsigned long prot = pgprot_val(_prot);
-
- prot |= _PAGE_NONCACHABLE;
- return __pgprot(prot);
-}
-
-#define pgprot_writecombine(prot) pgprot_noncached(prot)
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), pgprot)
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) \
- | pgprot_val(newprot)));
-
- return pte;
-}
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-
-static inline void pmd_set(pmd_t * pmdp, pte_t * ptep)
-{
- pmd_val(*pmdp) = (((unsigned long) ptep) & PAGE_MASK);
-}
-
-#define pmd_page_vaddr(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
-#ifndef CONFIG_DISCONTIGMEM
-#define pmd_page(pmd) (mem_map + ((pmd_val(pmd) >> PAGE_SHIFT) - PFN_BASE))
-#endif /* !CONFIG_DISCONTIGMEM */
-
-/* to find an entry in a page-table-directory. */
-#define pgd_index(address) \
- (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-#define pmd_index(address) \
- (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-#define pte_offset_kernel(dir, address) \
- ((pte_t *)pmd_page_vaddr(*(dir)) + pte_index(address))
-#define pte_offset_map(dir, address) \
- ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address))
-#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
-#define pte_unmap(pte) do { } while (0)
-#define pte_unmap_nested(pte) do { } while (0)
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x) (((x).val >> 2) & 0x1f)
-#define __swp_offset(x) ((x).val >> 10)
-#define __swp_entry(type, offset) \
- ((swp_entry_t) { ((type) << 2) | ((offset) << 10) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-#endif /* !__ASSEMBLY__ */
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr) (1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-#define __HAVE_ARCH_PTE_SAME
-#include <asm-generic/pgtable.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_PGTABLE_H */
+++ /dev/null
-#include <asm-generic/poll.h>
+++ /dev/null
-#ifndef _ASM_M32R_POSIX_TYPES_H
-#define _ASM_M32R_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
- int val[2];
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__)
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
-{
- unsigned long *__tmp = __p->fds_bits;
- int __i;
-
- if (__builtin_constant_p(__FDSET_LONGS)) {
- switch (__FDSET_LONGS) {
- case 16:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- __tmp[ 4] = 0; __tmp[ 5] = 0;
- __tmp[ 6] = 0; __tmp[ 7] = 0;
- __tmp[ 8] = 0; __tmp[ 9] = 0;
- __tmp[10] = 0; __tmp[11] = 0;
- __tmp[12] = 0; __tmp[13] = 0;
- __tmp[14] = 0; __tmp[15] = 0;
- return;
-
- case 8:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- __tmp[ 4] = 0; __tmp[ 5] = 0;
- __tmp[ 6] = 0; __tmp[ 7] = 0;
- return;
-
- case 4:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- return;
- }
- }
- __i = __FDSET_LONGS;
- while (__i) {
- __i--;
- *__tmp = 0;
- __tmp++;
- }
-}
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* _ASM_M32R_POSIX_TYPES_H */
+++ /dev/null
-#ifndef _ASM_M32R_PROCESSOR_H
-#define _ASM_M32R_PROCESSOR_H
-
-/*
- * include/asm-m32r/processor.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1994 Linus Torvalds
- * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <linux/kernel.h>
-#include <asm/cache.h>
-#include <asm/ptrace.h> /* pt_regs */
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l; })
-
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-struct cpuinfo_m32r {
- unsigned long pgtable_cache_sz;
- unsigned long cpu_clock;
- unsigned long bus_clock;
- unsigned long timer_divide;
- unsigned long loops_per_jiffy;
-};
-
-/*
- * capabilities of CPUs
- */
-
-extern struct cpuinfo_m32r boot_cpu_data;
-
-#ifdef CONFIG_SMP
-extern struct cpuinfo_m32r cpu_data[];
-#define current_cpu_data cpu_data[smp_processor_id()]
-#else
-#define cpu_data (&boot_cpu_data)
-#define current_cpu_data boot_cpu_data
-#endif
-
-/*
- * User space process size: 2GB (default).
- */
-#ifdef CONFIG_MMU
-#define TASK_SIZE (0x80000000UL)
-#else
-#define TASK_SIZE (0x00400000UL)
-#endif
-
-#ifdef __KERNEL__
-#define STACK_TOP TASK_SIZE
-#define STACK_TOP_MAX STACK_TOP
-#endif
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3)
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-#define MAX_TRAPS 10
-
-struct debug_trap {
- int nr_trap;
- unsigned long addr[MAX_TRAPS];
- unsigned long insn[MAX_TRAPS];
-};
-
-struct thread_struct {
- unsigned long address;
- unsigned long trap_no; /* Trap number */
- unsigned long error_code; /* Error code of trap */
- unsigned long lr; /* saved pc */
- unsigned long sp; /* user stack pointer */
- struct debug_trap debug_trap;
-};
-
-#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack)
-
-#define INIT_THREAD { \
- .sp = INIT_SP, \
-}
-
-/*
- * Do necessary setup to start up a newly executed thread.
- */
-
-/* User process Backup PSW */
-#define USERPS_BPSW (M32R_PSW_BSM|M32R_PSW_BIE|M32R_PSW_BPM)
-
-#define start_thread(regs, new_pc, new_spu) \
- do { \
- set_fs(USER_DS); \
- regs->psw = (regs->psw | USERPS_BPSW) & 0x0000FFFFUL; \
- regs->bpc = new_pc; \
- regs->spu = new_spu; \
- } while (0)
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-#define prepare_to_copy(tsk) do { } while (0)
-
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Copy and release all segment info associated with a VM */
-extern void copy_segments(struct task_struct *p, struct mm_struct * mm);
-extern void release_segments(struct mm_struct * mm);
-
-extern unsigned long thread_saved_pc(struct task_struct *);
-
-/* Copy and release all segment info associated with a VM */
-#define copy_segments(p, mm) do { } while (0)
-#define release_segments(mm) do { } while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-#define KSTK_EIP(tsk) ((tsk)->thread.lr)
-#define KSTK_ESP(tsk) ((tsk)->thread.sp)
-
-#define THREAD_SIZE (2*PAGE_SIZE)
-
-#define cpu_relax() barrier()
-
-#endif /* _ASM_M32R_PROCESSOR_H */
+++ /dev/null
-#ifndef _ASM_M32R_PTRACE_H
-#define _ASM_M32R_PTRACE_H
-
-/*
- * linux/include/asm-m32r/ptrace.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * M32R version:
- * Copyright (C) 2001-2002, 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-/* 0 - 13 are integer registers (general purpose registers). */
-#define PT_R4 0
-#define PT_R5 1
-#define PT_R6 2
-#define PT_REGS 3
-#define PT_R0 4
-#define PT_R1 5
-#define PT_R2 6
-#define PT_R3 7
-#define PT_R7 8
-#define PT_R8 9
-#define PT_R9 10
-#define PT_R10 11
-#define PT_R11 12
-#define PT_R12 13
-#define PT_SYSCNR 14
-#define PT_R13 PT_FP
-#define PT_R14 PT_LR
-#define PT_R15 PT_SP
-
-/* processor status and miscellaneous context registers. */
-#define PT_ACC0H 15
-#define PT_ACC0L 16
-#define PT_ACC1H 17 /* ISA_DSP_LEVEL2 only */
-#define PT_ACC1L 18 /* ISA_DSP_LEVEL2 only */
-#define PT_PSW 19
-#define PT_BPC 20
-#define PT_BBPSW 21
-#define PT_BBPC 22
-#define PT_SPU 23
-#define PT_FP 24
-#define PT_LR 25
-#define PT_SPI 26
-#define PT_ORIGR0 27
-
-/* virtual pt_reg entry for gdb */
-#define PT_PC 30
-#define PT_CBR 31
-#define PT_EVB 32
-
-
-/* Control registers. */
-#define SPR_CR0 PT_PSW
-#define SPR_CR1 PT_CBR /* read only */
-#define SPR_CR2 PT_SPI
-#define SPR_CR3 PT_SPU
-#define SPR_CR4
-#define SPR_CR5 PT_EVB /* part of M32R/E, M32R/I core only */
-#define SPR_CR6 PT_BPC
-#define SPR_CR7
-#define SPR_CR8 PT_BBPSW
-#define SPR_CR9
-#define SPR_CR10
-#define SPR_CR11
-#define SPR_CR12
-#define SPR_CR13 PT_WR
-#define SPR_CR14 PT_BBPC
-#define SPR_CR15
-
-/* this struct defines the way the registers are stored on the
- stack during a system call. */
-struct pt_regs {
- /* Saved main processor registers. */
- unsigned long r4;
- unsigned long r5;
- unsigned long r6;
- struct pt_regs *pt_regs;
- unsigned long r0;
- unsigned long r1;
- unsigned long r2;
- unsigned long r3;
- unsigned long r7;
- unsigned long r8;
- unsigned long r9;
- unsigned long r10;
- unsigned long r11;
- unsigned long r12;
- long syscall_nr;
-
- /* Saved main processor status and miscellaneous context registers. */
- unsigned long acc0h;
- unsigned long acc0l;
- unsigned long acc1h; /* ISA_DSP_LEVEL2 only */
- unsigned long acc1l; /* ISA_DSP_LEVEL2 only */
- unsigned long psw;
- unsigned long bpc; /* saved PC for TRAP syscalls */
- unsigned long bbpsw;
- unsigned long bbpc;
- unsigned long spu; /* saved user stack */
- unsigned long fp;
- unsigned long lr; /* saved PC for JL syscalls */
- unsigned long spi; /* saved kernel stack */
- unsigned long orig_r0;
-};
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-
-#define PTRACE_OLDSETOPTIONS 21
-
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
-#ifdef __KERNEL__
-
-#include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */
-
-struct task_struct;
-extern void init_debug_traps(struct task_struct *);
-#define arch_ptrace_attach(child) \
- init_debug_traps(child)
-
-#if defined(CONFIG_ISA_M32R2) || defined(CONFIG_CHIP_VDEC2)
-#define user_mode(regs) ((M32R_PSW_BPM & (regs)->psw) != 0)
-#elif defined(CONFIG_ISA_M32R)
-#define user_mode(regs) ((M32R_PSW_BSM & (regs)->psw) != 0)
-#else
-#error unknown isa configuration
-#endif
-
-#define instruction_pointer(regs) ((regs)->bpc)
-#define profile_pc(regs) instruction_pointer(regs)
-
-extern void show_regs(struct pt_regs *);
-
-extern void withdraw_debug_trap(struct pt_regs *regs);
-
-#define task_pt_regs(task) \
- ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE) - 1)
-
-#endif /* __KERNEL */
-
-#endif /* _ASM_M32R_PTRACE_H */
+++ /dev/null
-#ifndef _ASM_M32R_RESOURCE_H
-#define _ASM_M32R_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* _ASM_M32R_RESOURCE_H */
+++ /dev/null
-#ifndef __RTC_H__
-#define __RTC_H__
-
- /* Dallas DS1302 clock/calendar register numbers. */
-# define RTC_SECONDS 0
-# define RTC_MINUTES 1
-# define RTC_HOURS 2
-# define RTC_DAY_OF_MONTH 3
-# define RTC_MONTH 4
-# define RTC_WEEKDAY 5
-# define RTC_YEAR 6
-# define RTC_CONTROL 7
-
- /* Bits in CONTROL register. */
-# define RTC_CONTROL_WRITEPROTECT 0x80
-# define RTC_TRICKLECHARGER 8
-
- /* Bits in TRICKLECHARGER register TCS TCS TCS TCS DS DS RS RS. */
-# define RTC_TCR_PATTERN 0xA0 /* 1010xxxx */
-# define RTC_TCR_1DIOD 0x04 /* xxxx01xx */
-# define RTC_TCR_2DIOD 0x08 /* xxxx10xx */
-# define RTC_TCR_DISABLED 0x00 /* xxxxxx00 Disabled */
-# define RTC_TCR_2KOHM 0x01 /* xxxxxx01 2KOhm */
-# define RTC_TCR_4KOHM 0x02 /* xxxxxx10 4kOhm */
-# define RTC_TCR_8KOHM 0x03 /* xxxxxx11 8kOhm */
-
-#ifdef CONFIG_DS1302
-extern unsigned char ds1302_readreg(int reg);
-extern void ds1302_writereg(int reg, unsigned char val);
-extern int ds1302_init(void);
-# define CMOS_READ(x) ds1302_readreg(x)
-# define CMOS_WRITE(val,reg) ds1302_writereg(reg,val)
-# define RTC_INIT() ds1302_init()
-#else
- /* No RTC configured so we shouldn't try to access any. */
-# define CMOS_READ(x) 42
-# define CMOS_WRITE(x,y)
-# define RTC_INIT() (-1)
-#endif
-
-/*
- * The struct used to pass data via the following ioctl. Similar to the
- * struct tm in <time.h>, but it needs to be here so that the kernel
- * source is self contained, allowing cross-compiles, etc. etc.
- */
-struct rtc_time {
- int tm_sec;
- int tm_min;
- int tm_hour;
- int tm_mday;
- int tm_mon;
- int tm_year;
- int tm_wday;
- int tm_yday;
- int tm_isdst;
-};
-
-/* ioctl() calls that are permitted to the /dev/rtc interface. */
-#define RTC_MAGIC 'p'
-#define RTC_RD_TIME _IOR(RTC_MAGIC, 0x09, struct rtc_time) /* Read RTC time. */
-#define RTC_SET_TIME _IOW(RTC_MAGIC, 0x0a, struct rtc_time) /* Set RTC time. */
-#define RTC_SET_CHARGE _IOW(RTC_MAGIC, 0x0b, int)
-#define RTC_MAX_IOCTL 0x0b
-
-#endif /* __RTC_H__ */
+++ /dev/null
-//----------------------------------------------------------------------------
-//
-// File generated by S1D13806CFG.EXE
-//
-// Copyright (c) 2000,2001 Epson Research and Development, Inc.
-// All rights reserved.
-//
-//----------------------------------------------------------------------------
-
-// Panel: (active) 640x480 77Hz STN Single 8-bit (PCLK=CLKI=25.175MHz)
-// Memory: Embedded SDRAM (MCLK=CLKI3=50.000MHz) (BUSCLK=33.333MHz)
-
-#define SWIVEL_VIEW 0 /* 0:none, 1:90 not completed */
-
-static struct s1d13xxxfb_regval s1d13xxxfb_initregs[] = {
-
- {0x0001,0x00}, // Miscellaneous Register
- {0x01FC,0x00}, // Display Mode Register
-#if defined(CONFIG_PLAT_MAPPI)
- {0x0004,0x00}, // General IO Pins Configuration Register 0
- {0x0005,0x00}, // General IO Pins Configuration Register 1
- {0x0008,0x00}, // General IO Pins Control Register 0
- {0x0009,0x00}, // General IO Pins Control Register 1
- {0x0010,0x00}, // Memory Clock Configuration Register
- {0x0014,0x00}, // LCD Pixel Clock Configuration Register
- {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register
- {0x001C,0x00}, // MediaPlug Clock Configuration Register
-/*
- * .. 10MHz: 0x00
- * .. 30MHz: 0x01
- * 30MHz ..: 0x02
- */
- {0x001E,0x02}, // CPU To Memory Wait State Select Register
- {0x0021,0x02}, // DRAM Refresh Rate Register
- {0x002A,0x11}, // DRAM Timings Control Register 0
- {0x002B,0x13}, // DRAM Timings Control Register 1
- {0x0020,0x80}, // Memory Configuration Register
- {0x0030,0x25}, // Panel Type Register
- {0x0031,0x00}, // MOD Rate Register
- {0x0032,0x4F}, // LCD Horizontal Display Width Register
- {0x0034,0x12}, // LCD Horizontal Non-Display Period Register
- {0x0035,0x01}, // TFT FPLINE Start Position Register
- {0x0036,0x0B}, // TFT FPLINE Pulse Width Register
- {0x0038,0xDF}, // LCD Vertical Display Height Register 0
- {0x0039,0x01}, // LCD Vertical Display Height Register 1
- {0x003A,0x2C}, // LCD Vertical Non-Display Period Register
- {0x003B,0x0A}, // TFT FPFRAME Start Position Register
- {0x003C,0x01}, // TFT FPFRAME Pulse Width Register
-
- {0x0041,0x00}, // LCD Miscellaneous Register
- {0x0042,0x00}, // LCD Display Start Address Register 0
- {0x0043,0x00}, // LCD Display Start Address Register 1
- {0x0044,0x00}, // LCD Display Start Address Register 2
-
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
- {0x0004,0x07}, // GPIO[0:7] direction
- {0x0005,0x00}, // GPIO[8:12] direction
- {0x0008,0x00}, // GPIO[0:7] data
- {0x0009,0x00}, // GPIO[8:12] data
- {0x0008,0x04}, // LCD panel Vcc on
- {0x0008,0x05}, // LCD panel reset
- {0x0010,0x01}, // Memory Clock Configuration Register
- {0x0014,0x30}, // LCD Pixel Clock Configuration Register (CLKI 22MHz/4)
- {0x0018,0x00}, // CRT/TV Pixel Clock Configuration Register
- {0x001C,0x00}, // MediaPlug Clock Configuration Register(10MHz)
- {0x001E,0x00}, // CPU To Memory Wait State Select Register
- {0x0020,0x80}, // Memory Configuration Register
- {0x0021,0x03}, // DRAM Refresh Rate Register
- {0x002A,0x00}, // DRAM Timings Control Register 0
- {0x002B,0x01}, // DRAM Timings Control Register 1
- {0x0030,0x25}, // Panel Type Register
- {0x0031,0x00}, // MOD Rate Register
- {0x0032,0x1d}, // LCD Horizontal Display Width Register
- {0x0034,0x05}, // LCD Horizontal Non-Display Period Register
- {0x0035,0x01}, // TFT FPLINE Start Position Register
- {0x0036,0x01}, // TFT FPLINE Pulse Width Register
- {0x0038,0x3F}, // LCD Vertical Display Height Register 0
- {0x0039,0x01}, // LCD Vertical Display Height Register 1
- {0x003A,0x0b}, // LCD Vertical Non-Display Period Register
- {0x003B,0x07}, // TFT FPFRAME Start Position Register
- {0x003C,0x02}, // TFT FPFRAME Pulse Width Register
-
- {0x0041,0x00}, // LCD Miscellaneous Register
-#if (SWIVEL_VIEW == 0)
- {0x0042,0x00}, // LCD Display Start Address Register 0
- {0x0043,0x00}, // LCD Display Start Address Register 1
- {0x0044,0x00}, // LCD Display Start Address Register 2
-
-#elif (SWIVEL_VIEW == 1)
- // 1024 - W(320) = 0x2C0
- {0x0042,0xC0}, // LCD Display Start Address Register 0
- {0x0043,0x02}, // LCD Display Start Address Register 1
- {0x0044,0x00}, // LCD Display Start Address Register 2
- // 1024
- {0x0046,0x00}, // LCD Memory Address Offset Register 0
- {0x0047,0x02}, // LCD Memory Address Offset Register 1
-#else
-#error unsupported SWIVEL_VIEW mode
-#endif
-#else
-#error no platform configuration
-#endif /* CONFIG_PLAT_XXX */
-
- {0x0048,0x00}, // LCD Pixel Panning Register
- {0x004A,0x00}, // LCD Display FIFO High Threshold Control Register
- {0x004B,0x00}, // LCD Display FIFO Low Threshold Control Register
- {0x0050,0x4F}, // CRT/TV Horizontal Display Width Register
- {0x0052,0x13}, // CRT/TV Horizontal Non-Display Period Register
- {0x0053,0x01}, // CRT/TV HRTC Start Position Register
- {0x0054,0x0B}, // CRT/TV HRTC Pulse Width Register
- {0x0056,0xDF}, // CRT/TV Vertical Display Height Register 0
- {0x0057,0x01}, // CRT/TV Vertical Display Height Register 1
- {0x0058,0x2B}, // CRT/TV Vertical Non-Display Period Register
- {0x0059,0x09}, // CRT/TV VRTC Start Position Register
- {0x005A,0x01}, // CRT/TV VRTC Pulse Width Register
- {0x005B,0x10}, // TV Output Control Register
-
- {0x0062,0x00}, // CRT/TV Display Start Address Register 0
- {0x0063,0x00}, // CRT/TV Display Start Address Register 1
- {0x0064,0x00}, // CRT/TV Display Start Address Register 2
-
- {0x0068,0x00}, // CRT/TV Pixel Panning Register
- {0x006A,0x00}, // CRT/TV Display FIFO High Threshold Control Register
- {0x006B,0x00}, // CRT/TV Display FIFO Low Threshold Control Register
- {0x0070,0x00}, // LCD Ink/Cursor Control Register
- {0x0071,0x01}, // LCD Ink/Cursor Start Address Register
- {0x0072,0x00}, // LCD Cursor X Position Register 0
- {0x0073,0x00}, // LCD Cursor X Position Register 1
- {0x0074,0x00}, // LCD Cursor Y Position Register 0
- {0x0075,0x00}, // LCD Cursor Y Position Register 1
- {0x0076,0x00}, // LCD Ink/Cursor Blue Color 0 Register
- {0x0077,0x00}, // LCD Ink/Cursor Green Color 0 Register
- {0x0078,0x00}, // LCD Ink/Cursor Red Color 0 Register
- {0x007A,0x1F}, // LCD Ink/Cursor Blue Color 1 Register
- {0x007B,0x3F}, // LCD Ink/Cursor Green Color 1 Register
- {0x007C,0x1F}, // LCD Ink/Cursor Red Color 1 Register
- {0x007E,0x00}, // LCD Ink/Cursor FIFO Threshold Register
- {0x0080,0x00}, // CRT/TV Ink/Cursor Control Register
- {0x0081,0x01}, // CRT/TV Ink/Cursor Start Address Register
- {0x0082,0x00}, // CRT/TV Cursor X Position Register 0
- {0x0083,0x00}, // CRT/TV Cursor X Position Register 1
- {0x0084,0x00}, // CRT/TV Cursor Y Position Register 0
- {0x0085,0x00}, // CRT/TV Cursor Y Position Register 1
- {0x0086,0x00}, // CRT/TV Ink/Cursor Blue Color 0 Register
- {0x0087,0x00}, // CRT/TV Ink/Cursor Green Color 0 Register
- {0x0088,0x00}, // CRT/TV Ink/Cursor Red Color 0 Register
- {0x008A,0x1F}, // CRT/TV Ink/Cursor Blue Color 1 Register
- {0x008B,0x3F}, // CRT/TV Ink/Cursor Green Color 1 Register
- {0x008C,0x1F}, // CRT/TV Ink/Cursor Red Color 1 Register
- {0x008E,0x00}, // CRT/TV Ink/Cursor FIFO Threshold Register
- {0x0100,0x00}, // BitBlt Control Register 0
- {0x0101,0x00}, // BitBlt Control Register 1
- {0x0102,0x00}, // BitBlt ROP Code/Color Expansion Register
- {0x0103,0x00}, // BitBlt Operation Register
- {0x0104,0x00}, // BitBlt Source Start Address Register 0
- {0x0105,0x00}, // BitBlt Source Start Address Register 1
- {0x0106,0x00}, // BitBlt Source Start Address Register 2
- {0x0108,0x00}, // BitBlt Destination Start Address Register 0
- {0x0109,0x00}, // BitBlt Destination Start Address Register 1
- {0x010A,0x00}, // BitBlt Destination Start Address Register 2
- {0x010C,0x00}, // BitBlt Memory Address Offset Register 0
- {0x010D,0x00}, // BitBlt Memory Address Offset Register 1
- {0x0110,0x00}, // BitBlt Width Register 0
- {0x0111,0x00}, // BitBlt Width Register 1
- {0x0112,0x00}, // BitBlt Height Register 0
- {0x0113,0x00}, // BitBlt Height Register 1
- {0x0114,0x00}, // BitBlt Background Color Register 0
- {0x0115,0x00}, // BitBlt Background Color Register 1
- {0x0118,0x00}, // BitBlt Foreground Color Register 0
- {0x0119,0x00}, // BitBlt Foreground Color Register 1
- {0x01E0,0x00}, // Look-Up Table Mode Register
- {0x01E2,0x00}, // Look-Up Table Address Register
- {0x01F0,0x10}, // Power Save Configuration Register
- {0x01F1,0x00}, // Power Save Status Register
- {0x01F4,0x00}, // CPU-to-Memory Access Watchdog Timer Register
-#if (SWIVEL_VIEW == 0)
- {0x01FC,0x01}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
-#elif (SWIVEL_VIEW == 1)
- {0x01FC,0x41}, // Display Mode Register(0x01:LCD, 0x02:CRT, 0x03:LCD&CRT)
-#else
-#error unsupported SWIVEL_VIEW mode
-#endif /* SWIVEL_VIEW */
-
-#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
- {0x0008,0x07}, // LCD panel Vdd & Vg on
-#endif
-
- {0x0040,0x05}, // LCD Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
-#if defined(CONFIG_PLAT_MAPPI)
- {0x0046,0x80}, // LCD Memory Address Offset Register 0
- {0x0047,0x02}, // LCD Memory Address Offset Register 1
-#elif defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_OPSPUT) || defined(CONFIG_PLAT_MAPPI3)
- {0x0046,0xf0}, // LCD Memory Address Offset Register 0
- {0x0047,0x00}, // LCD Memory Address Offset Register 1
-#endif
- {0x0060,0x05}, // CRT/TV Display Mode Register (2:4bpp,3:8bpp,5:16bpp)
- {0x0066,0x80}, // CRT/TV Memory Address Offset Register 0 // takeo
- {0x0067,0x02}, // CRT/TV Memory Address Offset Register 1
-};
+++ /dev/null
-#ifndef _ASM_M32R_SCATTERLIST_H
-#define _ASM_M32R_SCATTERLIST_H
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- char * address; /* Location data is to be transferred to, NULL for
- * highmem page */
- unsigned long page_link;
- unsigned int offset;/* for highmem, page offset */
-
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-#define ISA_DMA_THRESHOLD (0x1fffffff)
-
-#endif /* _ASM_M32R_SCATTERLIST_H */
+++ /dev/null
-#ifndef _M32R_SECTIONS_H
-#define _M32R_SECTIONS_H
-
-/* nothing to see, move along */
-#include <asm-generic/sections.h>
-
-#endif /* _M32R_SECTIONS_H */
+++ /dev/null
-#ifndef _ASM_M32R_SEGMENT_H
-#define _ASM_M32R_SEGMENT_H
-
-#define __KERNEL_CS 0x10
-#define __KERNEL_DS 0x18
-
-#define __USER_CS 0x23
-#define __USER_DS 0x2B
-
-#endif /* _ASM_M32R_SEGMENT_H */
+++ /dev/null
-#ifndef _ASM_M32R_SEMBUF_H
-#define _ASM_M32R_SEMBUF_H
-
-/*
- * The semid64_ds structure for m32r architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_M32R_SEMBUF_H */
+++ /dev/null
-#ifndef _ASM_M32R_SERIAL_H
-#define _ASM_M32R_SERIAL_H
-
-/* include/asm-m32r/serial.h */
-
-
-#define BASE_BAUD 115200
-
-#endif /* _ASM_M32R_SERIAL_H */
+++ /dev/null
-#ifndef _ASM_M32R_SETUP_H
-#define _ASM_M32R_SETUP_H
-
-/*
- * This is set up by the setup-routine at boot-time
- */
-
-#define COMMAND_LINE_SIZE 512
-
-#ifdef __KERNEL__
-
-#define PARAM ((unsigned char *)empty_zero_page)
-
-#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
-#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
-#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
-#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
-#define INITRD_START (*(unsigned long *) (PARAM+0x010))
-#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
-
-#define M32R_CPUCLK (*(unsigned long *) (PARAM+0x018))
-#define M32R_BUSCLK (*(unsigned long *) (PARAM+0x01c))
-#define M32R_TIMER_DIVIDE (*(unsigned long *) (PARAM+0x020))
-
-#define COMMAND_LINE ((char *) (PARAM+0x100))
-
-#define SCREEN_INFO (*(struct screen_info *) (PARAM+0x200))
-
-#define RAMDISK_IMAGE_START_MASK (0x07FF)
-#define RAMDISK_PROMPT_FLAG (0x8000)
-#define RAMDISK_LOAD_FLAG (0x4000)
-
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_SETUP_H */
+++ /dev/null
-#ifndef _ASM_M32R_SHMBUF_H
-#define _ASM_M32R_SHMBUF_H
-
-/*
- * The shmid64_ds structure for M32R architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_M32R_SHMBUF_H */
+++ /dev/null
-#ifndef _ASM_M32R_SHMPARAM_H
-#define _ASM_M32R_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_M32R_SHMPARAM_H */
+++ /dev/null
-#ifndef _ASM_M32R_SIGCONTEXT_H
-#define _ASM_M32R_SIGCONTEXT_H
-
-struct sigcontext {
- /* CPU registers */
- /* Saved main processor registers. */
- unsigned long sc_r4;
- unsigned long sc_r5;
- unsigned long sc_r6;
- struct pt_regs *sc_pt_regs;
- unsigned long sc_r0;
- unsigned long sc_r1;
- unsigned long sc_r2;
- unsigned long sc_r3;
- unsigned long sc_r7;
- unsigned long sc_r8;
- unsigned long sc_r9;
- unsigned long sc_r10;
- unsigned long sc_r11;
- unsigned long sc_r12;
-
- /* Saved main processor status and miscellaneous context registers. */
- unsigned long sc_acc0h;
- unsigned long sc_acc0l;
- unsigned long sc_acc1h; /* ISA_DSP_LEVEL2 only */
- unsigned long sc_acc1l; /* ISA_DSP_LEVEL2 only */
- unsigned long sc_psw;
- unsigned long sc_bpc; /* saved PC for TRAP syscalls */
- unsigned long sc_bbpsw;
- unsigned long sc_bbpc;
- unsigned long sc_spu; /* saved user stack */
- unsigned long sc_fp;
- unsigned long sc_lr; /* saved PC for JL syscalls */
- unsigned long sc_spi; /* saved kernel stack */
-
- unsigned long oldmask;
-};
-
-#endif /* _ASM_M32R_SIGCONTEXT_H */
+++ /dev/null
-#ifndef _M32R_SIGINFO_H
-#define _M32R_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* _M32R_SIGINFO_H */
+++ /dev/null
-#ifndef _ASM_M32R_SIGNAL_H
-#define _ASM_M32R_SIGNAL_H
-
-#include <linux/types.h>
-#include <linux/time.h>
-#include <linux/compiler.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001u
-#define SA_NOCLDWAIT 0x00000002u
-#define SA_SIGINFO 0x00000004u
-#define SA_ONSTACK 0x08000000u
-#define SA_RESTART 0x10000000u
-#define SA_NODEFER 0x40000000u
-#define SA_RESETHAND 0x80000000u
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-#undef __HAVE_ARCH_SIG_BITOPS
-
-struct pt_regs;
-extern int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_SIGNAL_H */
+++ /dev/null
-#ifndef _ASM_M32R_SMP_H
-#define _ASM_M32R_SMP_H
-
-#ifdef CONFIG_SMP
-#ifndef __ASSEMBLY__
-
-#include <linux/cpumask.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <asm/m32r.h>
-
-#define PHYSID_ARRAY_SIZE 1
-
-struct physid_mask
-{
- unsigned long mask[PHYSID_ARRAY_SIZE];
-};
-
-typedef struct physid_mask physid_mask_t;
-
-#define physid_set(physid, map) set_bit(physid, (map).mask)
-#define physid_clear(physid, map) clear_bit(physid, (map).mask)
-#define physid_isset(physid, map) test_bit(physid, (map).mask)
-#define physid_test_and_set(physid, map) test_and_set_bit(physid, (map).mask)
-
-#define physids_and(dst, src1, src2) bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
-#define physids_or(dst, src1, src2) bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
-#define physids_clear(map) bitmap_zero((map).mask, MAX_APICS)
-#define physids_complement(dst, src) bitmap_complement((dst).mask,(src).mask, MAX_APICS)
-#define physids_empty(map) bitmap_empty((map).mask, MAX_APICS)
-#define physids_equal(map1, map2) bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
-#define physids_weight(map) bitmap_weight((map).mask, MAX_APICS)
-#define physids_shift_right(d, s, n) bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
-#define physids_shift_left(d, s, n) bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
-#define physids_coerce(map) ((map).mask[0])
-
-#define physids_promote(physids) \
- ({ \
- physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
- __physid_mask.mask[0] = physids; \
- __physid_mask; \
- })
-
-#define physid_mask_of_physid(physid) \
- ({ \
- physid_mask_t __physid_mask = PHYSID_MASK_NONE; \
- physid_set(physid, __physid_mask); \
- __physid_mask; \
- })
-
-#define PHYSID_MASK_ALL { {[0 ... PHYSID_ARRAY_SIZE-1] = ~0UL} }
-#define PHYSID_MASK_NONE { {[0 ... PHYSID_ARRAY_SIZE-1] = 0UL} }
-
-extern physid_mask_t phys_cpu_present_map;
-
-/*
- * Some lowlevel functions might want to know about
- * the real CPU ID <-> CPU # mapping.
- */
-extern volatile int cpu_2_physid[NR_CPUS];
-#define cpu_to_physid(cpu_id) cpu_2_physid[cpu_id]
-
-#define raw_smp_processor_id() (current_thread_info()->cpu)
-
-extern cpumask_t cpu_callout_map;
-
-static __inline__ int hard_smp_processor_id(void)
-{
- return (int)*(volatile long *)M32R_CPUID_PORTL;
-}
-
-static __inline__ int cpu_logical_map(int cpu)
-{
- return cpu;
-}
-
-static __inline__ int cpu_number_map(int cpu)
-{
- return cpu;
-}
-
-static __inline__ unsigned int num_booting_cpus(void)
-{
- return cpus_weight(cpu_callout_map);
-}
-
-extern void smp_send_timer(void);
-extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
-
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
-
-#endif /* not __ASSEMBLY__ */
-
-#define NO_PROC_ID (0xff) /* No processor magic marker */
-
-#define PROC_CHANGE_PENALTY (15) /* Schedule penalty */
-
-/*
- * M32R-mp IPI
- */
-#define RESCHEDULE_IPI (M32R_IRQ_IPI0-M32R_IRQ_IPI0)
-#define INVALIDATE_TLB_IPI (M32R_IRQ_IPI1-M32R_IRQ_IPI0)
-#define CALL_FUNCTION_IPI (M32R_IRQ_IPI2-M32R_IRQ_IPI0)
-#define LOCAL_TIMER_IPI (M32R_IRQ_IPI3-M32R_IRQ_IPI0)
-#define INVALIDATE_CACHE_IPI (M32R_IRQ_IPI4-M32R_IRQ_IPI0)
-#define CPU_BOOT_IPI (M32R_IRQ_IPI5-M32R_IRQ_IPI0)
-#define CALL_FUNC_SINGLE_IPI (M32R_IRQ_IPI6-M32R_IRQ_IPI0)
-
-#define IPI_SHIFT (0)
-#define NR_IPIS (8)
-
-#else /* CONFIG_SMP */
-
-#define hard_smp_processor_id() 0
-
-#endif /* CONFIG_SMP */
-
-#endif /* _ASM_M32R_SMP_H */
+++ /dev/null
-#ifndef _ASM_M32R_SOCKET_H
-#define _ASM_M32R_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_M32R_SOCKET_H */
+++ /dev/null
-#ifndef _ASM_M32R_SOCKIOS_H
-#define _ASM_M32R_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_M32R_SOCKIOS_H */
+++ /dev/null
-#ifndef _ASM_M32R_SPINLOCK_H
-#define _ASM_M32R_SPINLOCK_H
-
-/*
- * linux/include/asm-m32r/spinlock.h
- *
- * M32R version:
- * Copyright (C) 2001, 2002 Hitoshi Yamamoto
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <linux/compiler.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-
-/*
- * Your basic SMP spinlocks, allowing only a single CPU anywhere
- *
- * (the type definitions are in asm/spinlock_types.h)
- *
- * Simple spin lock operations. There are two variants, one clears IRQ's
- * on the local processor, one does not.
- *
- * We make no fairness assumptions. They have a cost.
- */
-
-#define __raw_spin_is_locked(x) (*(volatile int *)(&(x)->slock) <= 0)
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-#define __raw_spin_unlock_wait(x) \
- do { cpu_relax(); } while (__raw_spin_is_locked(x))
-
-/**
- * __raw_spin_trylock - Try spin lock and return a result
- * @lock: Pointer to the lock variable
- *
- * __raw_spin_trylock() tries to get the lock and returns a result.
- * On the m32r, the result value is 1 (= Success) or 0 (= Failure).
- */
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
-{
- int oldval;
- unsigned long tmp1, tmp2;
-
- /*
- * lock->slock : =1 : unlock
- * : <=0 : lock
- * {
- * oldval = lock->slock; <--+ need atomic operation
- * lock->slock = 0; <--+
- * }
- */
- __asm__ __volatile__ (
- "# __raw_spin_trylock \n\t"
- "ldi %1, #0; \n\t"
- "mvfc %2, psw; \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r6", "%3")
- "lock %0, @%3; \n\t"
- "unlock %1, @%3; \n\t"
- "mvtc %2, psw; \n\t"
- : "=&r" (oldval), "=&r" (tmp1), "=&r" (tmp2)
- : "r" (&lock->slock)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
-
- return (oldval > 0);
-}
-
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
-{
- unsigned long tmp0, tmp1;
-
- /*
- * lock->slock : =1 : unlock
- * : <=0 : lock
- *
- * for ( ; ; ) {
- * lock->slock -= 1; <-- need atomic operation
- * if (lock->slock == 0) break;
- * for ( ; lock->slock <= 0 ; );
- * }
- */
- __asm__ __volatile__ (
- "# __raw_spin_lock \n\t"
- ".fillinsn \n"
- "1: \n\t"
- "mvfc %1, psw; \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r6", "%2")
- "lock %0, @%2; \n\t"
- "addi %0, #-1; \n\t"
- "unlock %0, @%2; \n\t"
- "mvtc %1, psw; \n\t"
- "bltz %0, 2f; \n\t"
- LOCK_SECTION_START(".balign 4 \n\t")
- ".fillinsn \n"
- "2: \n\t"
- "ld %0, @%2; \n\t"
- "bgtz %0, 1b; \n\t"
- "bra 2b; \n\t"
- LOCK_SECTION_END
- : "=&r" (tmp0), "=&r" (tmp1)
- : "r" (&lock->slock)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
-}
-
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
-{
- mb();
- lock->slock = 1;
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers
- * but only one writer.
- *
- * NOTE! it is quite common to have readers in interrupts
- * but no interrupt writers. For those circumstances we
- * can "mix" irq-safe locks - any writer needs to get a
- * irq-safe write-lock, but readers can get non-irqsafe
- * read-locks.
- *
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- *
- * The inline assembly is non-obvious. Think about it.
- *
- * Changed to use the same technique as rw semaphores. See
- * semaphore.h for details. -ben
- */
-
-/**
- * read_can_lock - would read_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define __raw_read_can_lock(x) ((int)(x)->lock > 0)
-
-/**
- * write_can_lock - would write_trylock() succeed?
- * @lock: the rwlock in question.
- */
-#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
-
-static inline void __raw_read_lock(raw_rwlock_t *rw)
-{
- unsigned long tmp0, tmp1;
-
- /*
- * rw->lock : >0 : unlock
- * : <=0 : lock
- *
- * for ( ; ; ) {
- * rw->lock -= 1; <-- need atomic operation
- * if (rw->lock >= 0) break;
- * rw->lock += 1; <-- need atomic operation
- * for ( ; rw->lock <= 0 ; );
- * }
- */
- __asm__ __volatile__ (
- "# read_lock \n\t"
- ".fillinsn \n"
- "1: \n\t"
- "mvfc %1, psw; \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r6", "%2")
- "lock %0, @%2; \n\t"
- "addi %0, #-1; \n\t"
- "unlock %0, @%2; \n\t"
- "mvtc %1, psw; \n\t"
- "bltz %0, 2f; \n\t"
- LOCK_SECTION_START(".balign 4 \n\t")
- ".fillinsn \n"
- "2: \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r6", "%2")
- "lock %0, @%2; \n\t"
- "addi %0, #1; \n\t"
- "unlock %0, @%2; \n\t"
- "mvtc %1, psw; \n\t"
- ".fillinsn \n"
- "3: \n\t"
- "ld %0, @%2; \n\t"
- "bgtz %0, 1b; \n\t"
- "bra 3b; \n\t"
- LOCK_SECTION_END
- : "=&r" (tmp0), "=&r" (tmp1)
- : "r" (&rw->lock)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
-}
-
-static inline void __raw_write_lock(raw_rwlock_t *rw)
-{
- unsigned long tmp0, tmp1, tmp2;
-
- /*
- * rw->lock : =RW_LOCK_BIAS_STR : unlock
- * : !=RW_LOCK_BIAS_STR : lock
- *
- * for ( ; ; ) {
- * rw->lock -= RW_LOCK_BIAS_STR; <-- need atomic operation
- * if (rw->lock == 0) break;
- * rw->lock += RW_LOCK_BIAS_STR; <-- need atomic operation
- * for ( ; rw->lock != RW_LOCK_BIAS_STR ; ) ;
- * }
- */
- __asm__ __volatile__ (
- "# write_lock \n\t"
- "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t"
- "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t"
- ".fillinsn \n"
- "1: \n\t"
- "mvfc %2, psw; \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r7", "%3")
- "lock %0, @%3; \n\t"
- "sub %0, %1; \n\t"
- "unlock %0, @%3; \n\t"
- "mvtc %2, psw; \n\t"
- "bnez %0, 2f; \n\t"
- LOCK_SECTION_START(".balign 4 \n\t")
- ".fillinsn \n"
- "2: \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r7", "%3")
- "lock %0, @%3; \n\t"
- "add %0, %1; \n\t"
- "unlock %0, @%3; \n\t"
- "mvtc %2, psw; \n\t"
- ".fillinsn \n"
- "3: \n\t"
- "ld %0, @%3; \n\t"
- "beq %0, %1, 1b; \n\t"
- "bra 3b; \n\t"
- LOCK_SECTION_END
- : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
- : "r" (&rw->lock)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r7"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
-}
-
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
-{
- unsigned long tmp0, tmp1;
-
- __asm__ __volatile__ (
- "# read_unlock \n\t"
- "mvfc %1, psw; \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r6", "%2")
- "lock %0, @%2; \n\t"
- "addi %0, #1; \n\t"
- "unlock %0, @%2; \n\t"
- "mvtc %1, psw; \n\t"
- : "=&r" (tmp0), "=&r" (tmp1)
- : "r" (&rw->lock)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r6"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
-}
-
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
-{
- unsigned long tmp0, tmp1, tmp2;
-
- __asm__ __volatile__ (
- "# write_unlock \n\t"
- "seth %1, #high(" RW_LOCK_BIAS_STR "); \n\t"
- "or3 %1, %1, #low(" RW_LOCK_BIAS_STR "); \n\t"
- "mvfc %2, psw; \n\t"
- "clrpsw #0x40 -> nop; \n\t"
- DCACHE_CLEAR("%0", "r7", "%3")
- "lock %0, @%3; \n\t"
- "add %0, %1; \n\t"
- "unlock %0, @%3; \n\t"
- "mvtc %2, psw; \n\t"
- : "=&r" (tmp0), "=&r" (tmp1), "=&r" (tmp2)
- : "r" (&rw->lock)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r7"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
-}
-
-static inline int __raw_read_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t*)lock;
- if (atomic_dec_return(count) >= 0)
- return 1;
- atomic_inc(count);
- return 0;
-}
-
-static inline int __raw_write_trylock(raw_rwlock_t *lock)
-{
- atomic_t *count = (atomic_t *)lock;
- if (atomic_sub_and_test(RW_LOCK_BIAS, count))
- return 1;
- atomic_add(RW_LOCK_BIAS, count);
- return 0;
-}
-
-#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
-#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
-
-#define _raw_spin_relax(lock) cpu_relax()
-#define _raw_read_relax(lock) cpu_relax()
-#define _raw_write_relax(lock) cpu_relax()
-
-#endif /* _ASM_M32R_SPINLOCK_H */
+++ /dev/null
-#ifndef _ASM_M32R_SPINLOCK_TYPES_H
-#define _ASM_M32R_SPINLOCK_TYPES_H
-
-#ifndef __LINUX_SPINLOCK_TYPES_H
-# error "please don't include this file directly"
-#endif
-
-typedef struct {
- volatile int slock;
-} raw_spinlock_t;
-
-#define __RAW_SPIN_LOCK_UNLOCKED { 1 }
-
-typedef struct {
- volatile int lock;
-} raw_rwlock_t;
-
-#define RW_LOCK_BIAS 0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS }
-
-#endif /* _ASM_M32R_SPINLOCK_TYPES_H */
+++ /dev/null
-#ifndef _ASM_M32R_STAT_H
-#define _ASM_M32R_STAT_H
-
-#include <asm/byteorder.h>
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-#define STAT_HAVE_NSEC 1
-
-struct stat {
- unsigned short st_dev;
- unsigned short __pad1;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned short __pad2;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad0[4];
-#define STAT64_HAS_BROKEN_ST_INO
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[4];
-
- long long st_size;
- unsigned long st_blksize;
-
-#if defined(__BIG_ENDIAN)
- unsigned long __pad4; /* future possible st_blocks high bits */
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-#elif defined(__LITTLE_ENDIAN)
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4; /* future possible st_blocks high bits */
-#else
-#error no endian defined
-#endif
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#endif /* _ASM_M32R_STAT_H */
+++ /dev/null
-#ifndef _ASM_M32R_STATFS_H
-#define _ASM_M32R_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* _ASM_M32R_STATFS_H */
+++ /dev/null
-#ifndef _ASM_M32R_STRING_H
-#define _ASM_M32R_STRING_H
-
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char * s);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *__s, int __c, size_t __count);
-
-#endif /* _ASM_M32R_STRING_H */
+++ /dev/null
-#ifndef _ASM_M32R_SWAB_H
-#define _ASM_M32R_SWAB_H
-
-#include <linux/types.h>
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* _ASM_M32R_SWAB_H */
+++ /dev/null
-#ifndef _ASM_M32R_SYSCALL_H
-#define _ASM_M32R_SYSCALL_H
-
-/* Definitions for the system call vector. */
-#define SYSCALL_VECTOR "2"
-#define SYSCALL_VECTOR_ADDRESS "0xa0"
-
-#endif /* _ASM_M32R_SYSCALL_H */
+++ /dev/null
-#ifndef _ASM_M32R_SYSTEM_H
-#define _ASM_M32R_SYSTEM_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
- * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#include <linux/compiler.h>
-#include <asm/assembler.h>
-
-#ifdef __KERNEL__
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.
- *
- * `next' and `prev' should be struct task_struct, but it isn't always defined
- */
-
-#if defined(CONFIG_FRAME_POINTER) || \
- !defined(CONFIG_SCHED_OMIT_FRAME_POINTER)
-#define M32R_PUSH_FP " push fp\n"
-#define M32R_POP_FP " pop fp\n"
-#else
-#define M32R_PUSH_FP ""
-#define M32R_POP_FP ""
-#endif
-
-#define switch_to(prev, next, last) do { \
- __asm__ __volatile__ ( \
- " seth lr, #high(1f) \n" \
- " or3 lr, lr, #low(1f) \n" \
- " st lr, @%4 ; store old LR \n" \
- " ld lr, @%5 ; load new LR \n" \
- M32R_PUSH_FP \
- " st sp, @%2 ; store old SP \n" \
- " ld sp, @%3 ; load new SP \n" \
- " push %1 ; store `prev' on new stack \n" \
- " jmp lr \n" \
- " .fillinsn \n" \
- "1: \n" \
- " pop %0 ; restore `__last' from new stack \n" \
- M32R_POP_FP \
- : "=r" (last) \
- : "0" (prev), \
- "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \
- "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \
- : "memory", "lr" \
- ); \
-} while(0)
-
-/* Interrupt Control */
-#if !defined(CONFIG_CHIP_M32102) && !defined(CONFIG_CHIP_M32104)
-#define local_irq_enable() \
- __asm__ __volatile__ ("setpsw #0x40 -> nop": : :"memory")
-#define local_irq_disable() \
- __asm__ __volatile__ ("clrpsw #0x40 -> nop": : :"memory")
-#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-static inline void local_irq_enable(void)
-{
- unsigned long tmpreg;
- __asm__ __volatile__(
- "mvfc %0, psw; \n\t"
- "or3 %0, %0, #0x0040; \n\t"
- "mvtc %0, psw; \n\t"
- : "=&r" (tmpreg) : : "cbit", "memory");
-}
-
-static inline void local_irq_disable(void)
-{
- unsigned long tmpreg0, tmpreg1;
- __asm__ __volatile__(
- "ld24 %0, #0 ; Use 32-bit insn. \n\t"
- "mvfc %1, psw ; No interrupt can be accepted here. \n\t"
- "mvtc %0, psw \n\t"
- "and3 %0, %1, #0xffbf \n\t"
- "mvtc %0, psw \n\t"
- : "=&r" (tmpreg0), "=&r" (tmpreg1) : : "cbit", "memory");
-}
-#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-
-#define local_save_flags(x) \
- __asm__ __volatile__("mvfc %0,psw" : "=r"(x) : /* no input */)
-
-#define local_irq_restore(x) \
- __asm__ __volatile__("mvtc %0,psw" : /* no outputs */ \
- : "r" (x) : "cbit", "memory")
-
-#if !(defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_M32104))
-#define local_irq_save(x) \
- __asm__ __volatile__( \
- "mvfc %0, psw; \n\t" \
- "clrpsw #0x40 -> nop; \n\t" \
- : "=r" (x) : /* no input */ : "memory")
-#else /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-#define local_irq_save(x) \
- ({ \
- unsigned long tmpreg; \
- __asm__ __volatile__( \
- "ld24 %1, #0 \n\t" \
- "mvfc %0, psw \n\t" \
- "mvtc %1, psw \n\t" \
- "and3 %1, %0, #0xffbf \n\t" \
- "mvtc %1, psw \n\t" \
- : "=r" (x), "=&r" (tmpreg) \
- : : "cbit", "memory"); \
- })
-#endif /* CONFIG_CHIP_M32102 || CONFIG_CHIP_M32104 */
-
-#define irqs_disabled() \
- ({ \
- unsigned long flags; \
- local_save_flags(flags); \
- !(flags & 0x40); \
- })
-
-#define nop() __asm__ __volatile__ ("nop" : : )
-
-#define xchg(ptr, x) \
- ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-#define xchg_local(ptr, x) \
- ((__typeof__(*(ptr)))__xchg_local((unsigned long)(x), (ptr), \
- sizeof(*(ptr))))
-
-extern void __xchg_called_with_bad_pointer(void);
-
-#ifdef CONFIG_CHIP_M32700_TS1
-#define DCACHE_CLEAR(reg0, reg1, addr) \
- "seth "reg1", #high(dcache_dummy); \n\t" \
- "or3 "reg1", "reg1", #low(dcache_dummy); \n\t" \
- "lock "reg0", @"reg1"; \n\t" \
- "add3 "reg0", "addr", #0x1000; \n\t" \
- "ld "reg0", @"reg0"; \n\t" \
- "add3 "reg0", "addr", #0x2000; \n\t" \
- "ld "reg0", @"reg0"; \n\t" \
- "unlock "reg0", @"reg1"; \n\t"
- /* FIXME: This workaround code cannot handle kernel modules
- * correctly under SMP environment.
- */
-#else /* CONFIG_CHIP_M32700_TS1 */
-#define DCACHE_CLEAR(reg0, reg1, addr)
-#endif /* CONFIG_CHIP_M32700_TS1 */
-
-static __always_inline unsigned long
-__xchg(unsigned long x, volatile void *ptr, int size)
-{
- unsigned long flags;
- unsigned long tmp = 0;
-
- local_irq_save(flags);
-
- switch (size) {
-#ifndef CONFIG_SMP
- case 1:
- __asm__ __volatile__ (
- "ldb %0, @%2 \n\t"
- "stb %1, @%2 \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
- break;
- case 2:
- __asm__ __volatile__ (
- "ldh %0, @%2 \n\t"
- "sth %1, @%2 \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
- break;
- case 4:
- __asm__ __volatile__ (
- "ld %0, @%2 \n\t"
- "st %1, @%2 \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
- break;
-#else /* CONFIG_SMP */
- case 4:
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "r4", "%2")
- "lock %0, @%2; \n\t"
- "unlock %1, @%2; \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr)
- : "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- break;
-#endif /* CONFIG_SMP */
- default:
- __xchg_called_with_bad_pointer();
- }
-
- local_irq_restore(flags);
-
- return (tmp);
-}
-
-static __always_inline unsigned long
-__xchg_local(unsigned long x, volatile void *ptr, int size)
-{
- unsigned long flags;
- unsigned long tmp = 0;
-
- local_irq_save(flags);
-
- switch (size) {
- case 1:
- __asm__ __volatile__ (
- "ldb %0, @%2 \n\t"
- "stb %1, @%2 \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
- break;
- case 2:
- __asm__ __volatile__ (
- "ldh %0, @%2 \n\t"
- "sth %1, @%2 \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
- break;
- case 4:
- __asm__ __volatile__ (
- "ld %0, @%2 \n\t"
- "st %1, @%2 \n\t"
- : "=&r" (tmp) : "r" (x), "r" (ptr) : "memory");
- break;
- default:
- __xchg_called_with_bad_pointer();
- }
-
- local_irq_restore(flags);
-
- return (tmp);
-}
-
-#define __HAVE_ARCH_CMPXCHG 1
-
-static inline unsigned long
-__cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
-{
- unsigned long flags;
- unsigned int retval;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "r4", "%1")
- M32R_LOCK" %0, @%1; \n"
- " bne %0, %2, 1f; \n"
- M32R_UNLOCK" %3, @%1; \n"
- " bra 2f; \n"
- " .fillinsn \n"
- "1:"
- M32R_UNLOCK" %0, @%1; \n"
- " .fillinsn \n"
- "2:"
- : "=&r" (retval)
- : "r" (p), "r" (old), "r" (new)
- : "cbit", "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return retval;
-}
-
-static inline unsigned long
-__cmpxchg_local_u32(volatile unsigned int *p, unsigned int old,
- unsigned int new)
-{
- unsigned long flags;
- unsigned int retval;
-
- local_irq_save(flags);
- __asm__ __volatile__ (
- DCACHE_CLEAR("%0", "r4", "%1")
- "ld %0, @%1; \n"
- " bne %0, %2, 1f; \n"
- "st %3, @%1; \n"
- " bra 2f; \n"
- " .fillinsn \n"
- "1:"
- "st %0, @%1; \n"
- " .fillinsn \n"
- "2:"
- : "=&r" (retval)
- : "r" (p), "r" (old), "r" (new)
- : "cbit", "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
- , "r4"
-#endif /* CONFIG_CHIP_M32700_TS1 */
- );
- local_irq_restore(flags);
-
- return retval;
-}
-
-/* This function doesn't exist, so you'll get a linker error
- if something tries to do an invalid cmpxchg(). */
-extern void __cmpxchg_called_with_bad_pointer(void);
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_u32(ptr, old, new);
-#if 0 /* we don't have __cmpxchg_u64 */
- case 8:
- return __cmpxchg_u64(ptr, old, new);
-#endif /* 0 */
- }
- __cmpxchg_called_with_bad_pointer();
- return old;
-}
-
-#define cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg-local.h>
-
-static inline unsigned long __cmpxchg_local(volatile void *ptr,
- unsigned long old,
- unsigned long new, int size)
-{
- switch (size) {
- case 4:
- return __cmpxchg_local_u32(ptr, old, new);
- default:
- return __cmpxchg_local_generic(ptr, old, new, size);
- }
-
- return old;
-}
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#endif /* __KERNEL__ */
-
-/*
- * Memory barrier.
- *
- * mb() prevents loads and stores being reordered across this point.
- * rmb() prevents loads being reordered across this point.
- * wmb() prevents stores being reordered across this point.
- */
-#define mb() barrier()
-#define rmb() mb()
-#define wmb() mb()
-
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier. All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads. This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies. See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * b = 2;
- * memory_barrier();
- * p = &b; q = p;
- * read_barrier_depends();
- * d = *q;
- * </programlisting>
- *
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends(). However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- * CPU 0 CPU 1
- *
- * a = 2;
- * memory_barrier();
- * b = 3; y = b;
- * read_barrier_depends();
- * x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b". Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
- * in cases like this where there are no data dependencies.
- **/
-
-#define read_barrier_depends() do { } while (0)
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#define smp_read_barrier_depends() read_barrier_depends()
-#define set_mb(var, value) do { (void) xchg(&var, value); } while (0)
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#define smp_read_barrier_depends() do { } while (0)
-#define set_mb(var, value) do { var = value; barrier(); } while (0)
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif /* _ASM_M32R_SYSTEM_H */
+++ /dev/null
-#ifndef _ASM_M32R_TERMBITS_H
-#define _ASM_M32R_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /** input baud rate */
-#define CTVB 004000000000 /* VisioBraille Terminal flow control */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_M32R_TERMBITS_H */
+++ /dev/null
-#ifndef _M32R_TERMIOS_H
-#define _M32R_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-#include <linux/module.h>
-
-/* intr=^C quit=^\ erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* _M32R_TERMIOS_H */
+++ /dev/null
-#ifndef _ASM_M32R_THREAD_INFO_H
-#define _ASM_M32R_THREAD_INFO_H
-
-/* thread_info.h: m32r low-level thread information
- *
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- * Copyright (C) 2004 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#endif
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants must also be changed
- */
-#ifndef __ASSEMBLY__
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- unsigned long status; /* thread-synchronous flags */
- __u32 cpu; /* current CPU */
- int preempt_count; /* 0 => preemptable, <0 => BUG */
-
- mm_segment_t addr_limit; /* thread address space:
- 0-0xBFFFFFFF for user-thread
- 0-0xFFFFFFFF for kernel-thread
- */
- struct restart_block restart_block;
-
- __u8 supervisor_stack[0];
-};
-
-#else /* !__ASSEMBLY__ */
-
-/* offsets into the thread_info struct for assembly code access */
-#define TI_TASK 0x00000000
-#define TI_EXEC_DOMAIN 0x00000004
-#define TI_FLAGS 0x00000008
-#define TI_STATUS 0x0000000C
-#define TI_CPU 0x00000010
-#define TI_PRE_COUNT 0x00000014
-#define TI_ADDR_LIMIT 0x00000018
-#define TI_RESTART_BLOCK 0x000001C
-
-#endif
-
-#define PREEMPT_ACTIVE 0x10000000
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-#define THREAD_SIZE (2*PAGE_SIZE)
-
-/* how to get the thread information struct from C */
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
-
- __asm__ __volatile__ (
- "ldi %0, #%1 \n\t"
- "and %0, sp \n\t"
- : "=r" (ti) : "i" (~(THREAD_SIZE - 1))
- );
-
- return ti;
-}
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) \
- ({ \
- struct thread_info *ret; \
- \
- ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \
- \
- ret; \
- })
-#else
-#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-
-#define free_thread_info(info) kfree(info)
-
-#define TI_FLAG_FAULT_CODE_SHIFT 28
-
-static inline void set_thread_fault_code(unsigned int val)
-{
- struct thread_info *ti = current_thread_info();
- ti->flags = (ti->flags & (~0 >> (32 - TI_FLAG_FAULT_CODE_SHIFT)))
- | (val << TI_FLAG_FAULT_CODE_SHIFT);
-}
-
-static inline unsigned int get_thread_fault_code(void)
-{
- struct thread_info *ti = current_thread_info();
- return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
-}
-
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE 8192
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg
- .macro GET_THREAD_INFO reg
- ldi \reg, #-THREAD_SIZE
- and \reg, sp
- .endm
-
-#endif
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_SINGLESTEP 3 /* restore singlestep on return to user mode */
-#define TIF_IRET 4 /* return with iret */
-#define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal() */
-#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
-#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE 18 /* OOM killer killed process */
-#define TIF_FREEZE 19 /* is freezing for suspend */
-
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
-#define _TIF_IRET (1<<TIF_IRET)
-#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
-#define _TIF_USEDFPU (1<<TIF_USEDFPU)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE (1<<TIF_FREEZE)
-
-#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
-
-/*
- * Thread-synchronous status.
- *
- * This is different from the flags in that nobody else
- * ever touches our thread-synchronous status, so we don't
- * have to worry about atomic accesses.
- */
-#define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_THREAD_INFO_H */
+++ /dev/null
-#ifndef _ASM_M32R_TIMEX_H
-#define _ASM_M32R_TIMEX_H
-
-/*
- * linux/include/asm-m32r/timex.h
- *
- * m32r architecture timex specifications
- */
-
-#define CLOCK_TICK_RATE (CONFIG_BUS_CLOCK / CONFIG_TIMER_DIVIDE)
-#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */
-
-#ifdef __KERNEL__
-/*
- * Standard way to access the cycle counter.
- * Currently only used on SMP.
- */
-
-typedef unsigned long long cycles_t;
-
-static __inline__ cycles_t get_cycles (void)
-{
- return 0;
-}
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_TIMEX_H */
+++ /dev/null
-#ifndef _M32R_TLB_H
-#define _M32R_TLB_H
-
-/*
- * x86 doesn't need any special per-pte or
- * per-vma handling..
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it
- * fills up.
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-#include <asm-generic/tlb.h>
-
-#endif /* _M32R_TLB_H */
+++ /dev/null
-#ifndef _ASM_M32R_TLBFLUSH_H
-#define _ASM_M32R_TLBFLUSH_H
-
-#include <asm/m32r.h>
-
-/*
- * TLB flushing:
- *
- * - flush_tlb() flushes the current mm struct TLBs
- * - flush_tlb_all() flushes all processes TLBs
- * - flush_tlb_mm(mm) flushes the specified mm context TLB's
- * - flush_tlb_page(vma, vmaddr) flushes one page
- * - flush_tlb_range(vma, start, end) flushes a range of pages
- * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
- */
-
-extern void local_flush_tlb_all(void);
-extern void local_flush_tlb_mm(struct mm_struct *);
-extern void local_flush_tlb_page(struct vm_area_struct *, unsigned long);
-extern void local_flush_tlb_range(struct vm_area_struct *, unsigned long,
- unsigned long);
-
-#ifndef CONFIG_SMP
-#ifdef CONFIG_MMU
-#define flush_tlb_all() local_flush_tlb_all()
-#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
-#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page)
-#define flush_tlb_range(vma, start, end) \
- local_flush_tlb_range(vma, start, end)
-#define flush_tlb_kernel_range(start, end) local_flush_tlb_all()
-#else /* CONFIG_MMU */
-#define flush_tlb_all() do { } while (0)
-#define flush_tlb_mm(mm) do { } while (0)
-#define flush_tlb_page(vma, vmaddr) do { } while (0)
-#define flush_tlb_range(vma, start, end) do { } while (0)
-#endif /* CONFIG_MMU */
-#else /* CONFIG_SMP */
-extern void smp_flush_tlb_all(void);
-extern void smp_flush_tlb_mm(struct mm_struct *);
-extern void smp_flush_tlb_page(struct vm_area_struct *, unsigned long);
-extern void smp_flush_tlb_range(struct vm_area_struct *, unsigned long,
- unsigned long);
-
-#define flush_tlb_all() smp_flush_tlb_all()
-#define flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
-#define flush_tlb_page(vma, page) smp_flush_tlb_page(vma, page)
-#define flush_tlb_range(vma, start, end) \
- smp_flush_tlb_range(vma, start, end)
-#define flush_tlb_kernel_range(start, end) smp_flush_tlb_all()
-#endif /* CONFIG_SMP */
-
-static __inline__ void __flush_tlb_page(unsigned long page)
-{
- unsigned int tmpreg0, tmpreg1, tmpreg2;
-
- __asm__ __volatile__ (
- "seth %0, #high(%4) \n\t"
- "st %3, @(%5, %0) \n\t"
- "ldi %1, #1 \n\t"
- "st %1, @(%6, %0) \n\t"
- "add3 %1, %0, %7 \n\t"
- ".fillinsn \n"
- "1: \n\t"
- "ld %2, @(%6, %0) \n\t"
- "bnez %2, 1b \n\t"
- "ld %0, @%1+ \n\t"
- "ld %1, @%1 \n\t"
- "st %2, @+%0 \n\t"
- "st %2, @+%1 \n\t"
- : "=&r" (tmpreg0), "=&r" (tmpreg1), "=&r" (tmpreg2)
- : "r" (page), "i" (MMU_REG_BASE), "i" (MSVA_offset),
- "i" (MTOP_offset), "i" (MIDXI_offset)
- : "memory"
- );
-}
-
-static __inline__ void __flush_tlb_all(void)
-{
- unsigned int tmpreg0, tmpreg1;
-
- __asm__ __volatile__ (
- "seth %0, #high(%2) \n\t"
- "or3 %0, %0, #low(%2) \n\t"
- "ldi %1, #0xc \n\t"
- "st %1, @%0 \n\t"
- ".fillinsn \n"
- "1: \n\t"
- "ld %1, @%0 \n\t"
- "bnez %1, 1b \n\t"
- : "=&r" (tmpreg0), "=&r" (tmpreg1)
- : "i" (MTOP) : "memory"
- );
-}
-
-extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
-
-#endif /* _ASM_M32R_TLBFLUSH_H */
+++ /dev/null
-#ifndef _ASM_M32R_TOPOLOGY_H
-#define _ASM_M32R_TOPOLOGY_H
-
-#include <asm-generic/topology.h>
-
-#endif /* _ASM_M32R_TOPOLOGY_H */
+++ /dev/null
-#ifndef _ASM_M32R_TYPES_H
-#define _ASM_M32R_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* DMA addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-typedef u64 dma64_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_M32R_TYPES_H */
+++ /dev/null
-#ifndef _ASM_M32R_UACCESS_H
-#define _ASM_M32R_UACCESS_H
-
-/*
- * linux/include/asm-m32r/uaccess.h
- *
- * M32R version.
- * Copyright (C) 2004, 2006 Hirokazu Takata <takata at linux-m32r.org>
- */
-
-/*
- * User space memory access functions
- */
-#include <linux/errno.h>
-#include <linux/thread_info.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#ifdef CONFIG_MMU
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#else /* not CONFIG_MMU */
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
-#define USER_DS MAKE_MM_SEG(0xFFFFFFFF)
-#define get_ds() (KERNEL_DS)
-
-static inline mm_segment_t get_fs(void)
-{
- return USER_DS;
-}
-
-static inline void set_fs(mm_segment_t s)
-{
-}
-
-#endif /* not CONFIG_MMU */
-
-#define segment_eq(a,b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) \
- ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
- *
- * This needs 33-bit arithmetic. We have a carry...
- */
-#define __range_ok(addr,size) ({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm ( \
- " cmpu %1, %1 ; clear cbit\n" \
- " addx %1, %3 ; set cbit if overflow\n" \
- " subx %0, %0\n" \
- " cmpu %4, %1\n" \
- " subx %0, %5\n" \
- : "=&r" (flag), "=r" (roksum) \
- : "1" (addr), "r" ((int)(size)), \
- "r" (current_thread_info()->addr_limit.seg), "r" (0) \
- : "cbit" ); \
- flag; })
-
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
- * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- * to write to a block, it is always safe to read from it.
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#ifdef CONFIG_MMU
-#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
-#else
-static inline int access_ok(int type, const void *addr, unsigned long size)
-{
- unsigned long val = (unsigned long)addr;
-
- return ((val >= memory_start) && ((val + size) < memory_end));
-}
-#endif /* CONFIG_MMU */
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the uglyness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-/* Careful: we have to cast the result to the type of the pointer for sign
- reasons */
-/**
- * get_user: - Get a simple variable from user space.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user(x,ptr) \
- __get_user_check((x),(ptr),sizeof(*(ptr)))
-
-/**
- * put_user: - Write a simple value into user space.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define put_user(x,ptr) \
- __put_user_check((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
-/**
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user(x,ptr) \
- __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
-
-#define __get_user_nocheck(x,ptr,size) \
-({ \
- long __gu_err = 0; \
- unsigned long __gu_val; \
- might_sleep(); \
- __get_user_size(__gu_val,(ptr),(size),__gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-#define __get_user_check(x,ptr,size) \
-({ \
- long __gu_err = -EFAULT; \
- unsigned long __gu_val = 0; \
- const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
- might_sleep(); \
- if (access_ok(VERIFY_READ,__gu_addr,size)) \
- __get_user_size(__gu_val,__gu_addr,(size),__gu_err); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: __get_user_asm(x,ptr,retval,"ub"); break; \
- case 2: __get_user_asm(x,ptr,retval,"uh"); break; \
- case 4: __get_user_asm(x,ptr,retval,""); break; \
- default: (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype) \
- __asm__ __volatile__( \
- " .fillinsn\n" \
- "1: ld"itype" %1,@%2\n" \
- " .fillinsn\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "3: ldi %0,%3\n" \
- " seth r14,#high(2b)\n" \
- " or3 r14,r14,#low(2b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : "=&r" (err), "=&r" (x) \
- : "r" (addr), "i" (-EFAULT), "0" (err) \
- : "r14", "memory")
-
-/**
- * __put_user: - Write a simple value into user space, with less checking.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user(x,ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
-
-
-#define __put_user_nocheck(x,ptr,size) \
-({ \
- long __pu_err; \
- might_sleep(); \
- __put_user_size((x),(ptr),(size),__pu_err); \
- __pu_err; \
-})
-
-
-#define __put_user_check(x,ptr,size) \
-({ \
- long __pu_err = -EFAULT; \
- __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
- might_sleep(); \
- if (access_ok(VERIFY_WRITE,__pu_addr,size)) \
- __put_user_size((x),__pu_addr,(size),__pu_err); \
- __pu_err; \
-})
-
-#if defined(__LITTLE_ENDIAN__)
-#define __put_user_u64(x, addr, err) \
- __asm__ __volatile__( \
- " .fillinsn\n" \
- "1: st %L1,@%2\n" \
- " .fillinsn\n" \
- "2: st %H1,@(4,%2)\n" \
- " .fillinsn\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "4: ldi %0,%3\n" \
- " seth r14,#high(3b)\n" \
- " or3 r14,r14,#low(3b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b,4b\n" \
- " .long 2b,4b\n" \
- ".previous" \
- : "=&r" (err) \
- : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
- : "r14", "memory")
-
-#elif defined(__BIG_ENDIAN__)
-#define __put_user_u64(x, addr, err) \
- __asm__ __volatile__( \
- " .fillinsn\n" \
- "1: st %H1,@%2\n" \
- " .fillinsn\n" \
- "2: st %L1,@(4,%2)\n" \
- " .fillinsn\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "4: ldi %0,%3\n" \
- " seth r14,#high(3b)\n" \
- " or3 r14,r14,#low(3b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b,4b\n" \
- " .long 2b,4b\n" \
- ".previous" \
- : "=&r" (err) \
- : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
- : "r14", "memory")
-#else
-#error no endian defined
-#endif
-
-extern void __put_user_bad(void);
-
-#define __put_user_size(x,ptr,size,retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: __put_user_asm(x,ptr,retval,"b"); break; \
- case 2: __put_user_asm(x,ptr,retval,"h"); break; \
- case 4: __put_user_asm(x,ptr,retval,""); break; \
- case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
- default: __put_user_bad(); \
- } \
-} while (0)
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype) \
- __asm__ __volatile__( \
- " .fillinsn\n" \
- "1: st"itype" %1,@%2\n" \
- " .fillinsn\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "3: ldi %0,%3\n" \
- " seth r14,#high(2b)\n" \
- " or3 r14,r14,#low(2b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : "=&r" (err) \
- : "r" (x), "r" (addr), "i" (-EFAULT), "0" (err) \
- : "r14", "memory")
-
-/*
- * Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault
- * we return the initial request size (1, 2 or 4), as copy_*_user should do.
- * If a store crosses a page boundary and gets a fault, the m32r will not write
- * anything, so this is accurate.
- */
-
-/*
- * Copy To/From Userspace
- */
-
-/* Generic arbitrary sized copy. */
-/* Return the number of bytes NOT copied. */
-#define __copy_user(to,from,size) \
-do { \
- unsigned long __dst, __src, __c; \
- __asm__ __volatile__ ( \
- " mv r14, %0\n" \
- " or r14, %1\n" \
- " beq %0, %1, 9f\n" \
- " beqz %2, 9f\n" \
- " and3 r14, r14, #3\n" \
- " bnez r14, 2f\n" \
- " and3 %2, %2, #3\n" \
- " beqz %3, 2f\n" \
- " addi %0, #-4 ; word_copy \n" \
- " .fillinsn\n" \
- "0: ld r14, @%1+\n" \
- " addi %3, #-1\n" \
- " .fillinsn\n" \
- "1: st r14, @+%0\n" \
- " bnez %3, 0b\n" \
- " beqz %2, 9f\n" \
- " addi %0, #4\n" \
- " .fillinsn\n" \
- "2: ldb r14, @%1 ; byte_copy \n" \
- " .fillinsn\n" \
- "3: stb r14, @%0\n" \
- " addi %1, #1\n" \
- " addi %2, #-1\n" \
- " addi %0, #1\n" \
- " bnez %2, 2b\n" \
- " .fillinsn\n" \
- "9:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "5: addi %3, #1\n" \
- " addi %1, #-4\n" \
- " .fillinsn\n" \
- "6: slli %3, #2\n" \
- " add %2, %3\n" \
- " addi %0, #4\n" \
- " .fillinsn\n" \
- "7: seth r14, #high(9b)\n" \
- " or3 r14, r14, #low(9b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 0b,6b\n" \
- " .long 1b,5b\n" \
- " .long 2b,9b\n" \
- " .long 3b,9b\n" \
- ".previous\n" \
- : "=&r" (__dst), "=&r" (__src), "=&r" (size), \
- "=&r" (__c) \
- : "0" (to), "1" (from), "2" (size), "3" (size / 4) \
- : "r14", "memory"); \
-} while (0)
-
-#define __copy_user_zeroing(to,from,size) \
-do { \
- unsigned long __dst, __src, __c; \
- __asm__ __volatile__ ( \
- " mv r14, %0\n" \
- " or r14, %1\n" \
- " beq %0, %1, 9f\n" \
- " beqz %2, 9f\n" \
- " and3 r14, r14, #3\n" \
- " bnez r14, 2f\n" \
- " and3 %2, %2, #3\n" \
- " beqz %3, 2f\n" \
- " addi %0, #-4 ; word_copy \n" \
- " .fillinsn\n" \
- "0: ld r14, @%1+\n" \
- " addi %3, #-1\n" \
- " .fillinsn\n" \
- "1: st r14, @+%0\n" \
- " bnez %3, 0b\n" \
- " beqz %2, 9f\n" \
- " addi %0, #4\n" \
- " .fillinsn\n" \
- "2: ldb r14, @%1 ; byte_copy \n" \
- " .fillinsn\n" \
- "3: stb r14, @%0\n" \
- " addi %1, #1\n" \
- " addi %2, #-1\n" \
- " addi %0, #1\n" \
- " bnez %2, 2b\n" \
- " .fillinsn\n" \
- "9:\n" \
- ".section .fixup,\"ax\"\n" \
- " .balign 4\n" \
- "5: addi %3, #1\n" \
- " addi %1, #-4\n" \
- " .fillinsn\n" \
- "6: slli %3, #2\n" \
- " add %2, %3\n" \
- " addi %0, #4\n" \
- " .fillinsn\n" \
- "7: ldi r14, #0 ; store zero \n" \
- " .fillinsn\n" \
- "8: addi %2, #-1\n" \
- " stb r14, @%0 ; ACE? \n" \
- " addi %0, #1\n" \
- " bnez %2, 8b\n" \
- " seth r14, #high(9b)\n" \
- " or3 r14, r14, #low(9b)\n" \
- " jmp r14\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 0b,6b\n" \
- " .long 1b,5b\n" \
- " .long 2b,7b\n" \
- " .long 3b,7b\n" \
- ".previous\n" \
- : "=&r" (__dst), "=&r" (__src), "=&r" (size), \
- "=&r" (__c) \
- : "0" (to), "1" (from), "2" (size), "3" (size / 4) \
- : "r14", "memory"); \
-} while (0)
-
-
-/* We let the __ versions of copy_from/to_user inline, because they're often
- * used in fast paths and have only a small space overhead.
- */
-static inline unsigned long __generic_copy_from_user_nocheck(void *to,
- const void __user *from, unsigned long n)
-{
- __copy_user_zeroing(to,from,n);
- return n;
-}
-
-static inline unsigned long __generic_copy_to_user_nocheck(void __user *to,
- const void *from, unsigned long n)
-{
- __copy_user(to,from,n);
- return n;
-}
-
-unsigned long __generic_copy_to_user(void __user *, const void *, unsigned long);
-unsigned long __generic_copy_from_user(void *, const void __user *, unsigned long);
-
-/**
- * __copy_to_user: - Copy a block of data into user space, with less checking.
- * @to: Destination address, in user space.
- * @from: Source address, in kernel space.
- * @n: Number of bytes to copy.
- *
- * Context: User context only. This function may sleep.
- *
- * Copy data from kernel space to user space. Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- */
-#define __copy_to_user(to,from,n) \
- __generic_copy_to_user_nocheck((to),(from),(n))
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-/**
- * copy_to_user: - Copy a block of data into user space.
- * @to: Destination address, in user space.
- * @from: Source address, in kernel space.
- * @n: Number of bytes to copy.
- *
- * Context: User context only. This function may sleep.
- *
- * Copy data from kernel space to user space.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- */
-#define copy_to_user(to,from,n) \
-({ \
- might_sleep(); \
- __generic_copy_to_user((to),(from),(n)); \
-})
-
-/**
- * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space.
- * @from: Source address, in user space.
- * @n: Number of bytes to copy.
- *
- * Context: User context only. This function may sleep.
- *
- * Copy data from user space to kernel space. Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- *
- * If some data could not be copied, this function will pad the copied
- * data to the requested size using zero bytes.
- */
-#define __copy_from_user(to,from,n) \
- __generic_copy_from_user_nocheck((to),(from),(n))
-
-/**
- * copy_from_user: - Copy a block of data from user space.
- * @to: Destination address, in kernel space.
- * @from: Source address, in user space.
- * @n: Number of bytes to copy.
- *
- * Context: User context only. This function may sleep.
- *
- * Copy data from user space to kernel space.
- *
- * Returns number of bytes that could not be copied.
- * On success, this will be zero.
- *
- * If some data could not be copied, this function will pad the copied
- * data to the requested size using zero bytes.
- */
-#define copy_from_user(to,from,n) \
-({ \
- might_sleep(); \
- __generic_copy_from_user((to),(from),(n)); \
-})
-
-long __must_check strncpy_from_user(char *dst, const char __user *src,
- long count);
-long __must_check __strncpy_from_user(char *dst,
- const char __user *src, long count);
-
-/**
- * __clear_user: - Zero a block of memory in user space, with less checking.
- * @to: Destination address, in user space.
- * @n: Number of bytes to zero.
- *
- * Zero a block of memory in user space. Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be cleared.
- * On success, this will be zero.
- */
-unsigned long __clear_user(void __user *mem, unsigned long len);
-
-/**
- * clear_user: - Zero a block of memory in user space.
- * @to: Destination address, in user space.
- * @n: Number of bytes to zero.
- *
- * Zero a block of memory in user space. Caller must check
- * the specified block with access_ok() before calling this function.
- *
- * Returns number of bytes that could not be cleared.
- * On success, this will be zero.
- */
-unsigned long clear_user(void __user *mem, unsigned long len);
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only. This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-long strnlen_user(const char __user *str, long n);
-
-#endif /* _ASM_M32R_UACCESS_H */
+++ /dev/null
-#ifndef _ASM_M32R_UCONTEXT_H
-#define _ASM_M32R_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_M32R_UCONTEXT_H */
+++ /dev/null
-#ifndef _ASM_M32R_UNALIGNED_H
-#define _ASM_M32R_UNALIGNED_H
-
-#if defined(__LITTLE_ENDIAN__)
-# include <linux/unaligned/le_memmove.h>
-# include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned __get_unaligned_le
-# define put_unaligned __put_unaligned_le
-#else
-# include <linux/unaligned/be_memmove.h>
-# include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
-# define get_unaligned __get_unaligned_be
-# define put_unaligned __put_unaligned_be
-#endif
-
-#endif /* _ASM_M32R_UNALIGNED_H */
+++ /dev/null
-#ifndef _ASM_M32R_UNISTD_H
-#define _ASM_M32R_UNISTD_H
-
-/*
- * This file contains the system call numbers.
- */
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-/* 16 is unused */
-/* 17 is unused */
-/* 18 is unused */
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-/* 23 is unused */
-/* 24 is unused */
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-/* 28 is unused */
-#define __NR_pause 29
-#define __NR_utime 30
-/* 31 is unused */
-#define __NR_cachectl 32 /* old #define __NR_gtty 32*/
-#define __NR_access 33
-/* 34 is unused */
-/* 35 is unused */
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-/* 44 is unused */
-#define __NR_brk 45
-/* 46 is unused */
-/* 47 is unused (getgid16) */
-/* 48 is unused */
-/* 49 is unused */
-/* 50 is unused */
-#define __NR_acct 51
-#define __NR_umount2 52
-/* 53 is unused */
-#define __NR_ioctl 54
-/* 55 is unused (fcntl) */
-/* 56 is unused */
-#define __NR_setpgid 57
-/* 58 is unused */
-/* 59 is unused */
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-/* 67 is unused */
-/* 68 is unused*/
-/* 69 is unused*/
-/* 70 is unused */
-/* 71 is unused */
-/* 72 is unused */
-/* 73 is unused */
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-/* 76 is unused (old getrlimit) */
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-/* 80 is unused */
-/* 81 is unused */
-/* 82 is unused */
-#define __NR_symlink 83
-/* 84 is unused */
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-/* 89 is unused */
-/* 90 is unused */
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-/* 95 is unused */
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-/* 98 is unused */
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-/* 101 is unused */
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-/* 109 is unused */
-/* 110 is unused */
-#define __NR_vhangup 111
-/* 112 is unused */
-/* 113 is unused */
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-/* 119 is unused */
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-/* 123 is unused */
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-/* 126 is unused */
-/* 127 is unused */
-#define __NR_init_module 128
-#define __NR_delete_module 129
-/* 130 is unused */
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-/* 137 is unused */
-/* 138 is unused */
-/* 139 is unused */
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-/* 164 is unused */
-/* 165 is unused */
-#define __NR_tas 166
-/* 167 is unused */
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-/* 170 is unused */
-/* 171 is unused */
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-/* 182 is unused */
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-/* 188 is unused */
-/* 189 is unused */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-#define __NR_getdents64 220
-#define __NR_fcntl64 221
-/* 222 is unused */
-/* 223 is unused */
-#define __NR_gettid 224
-#define __NR_readahead 225
-#define __NR_setxattr 226
-#define __NR_lsetxattr 227
-#define __NR_fsetxattr 228
-#define __NR_getxattr 229
-#define __NR_lgetxattr 230
-#define __NR_fgetxattr 231
-#define __NR_listxattr 232
-#define __NR_llistxattr 233
-#define __NR_flistxattr 234
-#define __NR_removexattr 235
-#define __NR_lremovexattr 236
-#define __NR_fremovexattr 237
-#define __NR_tkill 238
-#define __NR_sendfile64 239
-#define __NR_futex 240
-#define __NR_sched_setaffinity 241
-#define __NR_sched_getaffinity 242
-#define __NR_set_thread_area 243
-#define __NR_get_thread_area 244
-#define __NR_io_setup 245
-#define __NR_io_destroy 246
-#define __NR_io_getevents 247
-#define __NR_io_submit 248
-#define __NR_io_cancel 249
-#define __NR_fadvise64 250
-/* 251 is unused */
-#define __NR_exit_group 252
-#define __NR_lookup_dcookie 253
-#define __NR_epoll_create 254
-#define __NR_epoll_ctl 255
-#define __NR_epoll_wait 256
-#define __NR_remap_file_pages 257
-#define __NR_set_tid_address 258
-#define __NR_timer_create 259
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
-#define __NR_statfs64 268
-#define __NR_fstatfs64 269
-#define __NR_tgkill 270
-#define __NR_utimes 271
-#define __NR_fadvise64_64 272
-#define __NR_vserver 273
-#define __NR_mbind 274
-#define __NR_get_mempolicy 275
-#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
-#define __NR_mq_unlink (__NR_mq_open+1)
-#define __NR_mq_timedsend (__NR_mq_open+2)
-#define __NR_mq_timedreceive (__NR_mq_open+3)
-#define __NR_mq_notify (__NR_mq_open+4)
-#define __NR_mq_getsetattr (__NR_mq_open+5)
-#define __NR_kexec_load 283
-#define __NR_waitid 284
-/* 285 is unused */
-#define __NR_add_key 286
-#define __NR_request_key 287
-#define __NR_keyctl 288
-#define __NR_ioprio_set 289
-#define __NR_ioprio_get 290
-#define __NR_inotify_init 291
-#define __NR_inotify_add_watch 292
-#define __NR_inotify_rm_watch 293
-#define __NR_migrate_pages 294
-#define __NR_openat 295
-#define __NR_mkdirat 296
-#define __NR_mknodat 297
-#define __NR_fchownat 298
-#define __NR_futimesat 299
-#define __NR_fstatat64 300
-#define __NR_unlinkat 301
-#define __NR_renameat 302
-#define __NR_linkat 303
-#define __NR_symlinkat 304
-#define __NR_readlinkat 305
-#define __NR_fchmodat 306
-#define __NR_faccessat 307
-#define __NR_pselect6 308
-#define __NR_ppoll 309
-#define __NR_unshare 310
-#define __NR_set_robust_list 311
-#define __NR_get_robust_list 312
-#define __NR_splice 313
-#define __NR_sync_file_range 314
-#define __NR_tee 315
-#define __NR_vmsplice 316
-#define __NR_move_pages 317
-#define __NR_getcpu 318
-#define __NR_epoll_pwait 319
-#define __NR_utimensat 320
-#define __NR_signalfd 321
-/* #define __NR_timerfd 322 removed */
-#define __NR_eventfd 323
-#define __NR_fallocate 324
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 325
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-#define __IGNORE_lchown
-#define __IGNORE_setuid
-#define __IGNORE_getuid
-#define __IGNORE_setgid
-#define __IGNORE_getgid
-#define __IGNORE_geteuid
-#define __IGNORE_getegid
-#define __IGNORE_fcntl
-#define __IGNORE_setreuid
-#define __IGNORE_setregid
-#define __IGNORE_getrlimit
-#define __IGNORE_getgroups
-#define __IGNORE_setgroups
-#define __IGNORE_select
-#define __IGNORE_mmap
-#define __IGNORE_fchown
-#define __IGNORE_setfsuid
-#define __IGNORE_setfsgid
-#define __IGNORE_setresuid
-#define __IGNORE_getresuid
-#define __IGNORE_setresgid
-#define __IGNORE_getresgid
-#define __IGNORE_chown
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_M32R_UNISTD_H */
+++ /dev/null
-#ifndef _ASM_M32R_USER_H
-#define _ASM_M32R_USER_H
-
-#include <linux/types.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd).
- *
- * The actual file contents are as follows:
- * UPAGE: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page.
- * DATA: The data area is stored. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * STACK: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these off in order to be
- * able to write an integer number of pages.
- */
-
-struct user {
- struct pt_regs regs; /* entire machine state */
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_DATA_START_ADDR (u.start_data)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ASM_M32R_USER_H */
+++ /dev/null
-#ifndef _ASM_M32R_VGA_H
-#define _ASM_M32R_VGA_H
-
-/*
- * Access to VGA videoram
- *
- * (c) 1998 Martin Mares <mj@ucw.cz>
- */
-
-/*
- * On the PC, we can just recalculate addresses and then
- * access the videoram directly without any black magic.
- */
-
-#define VGA_MAP_MEM(x,s) (unsigned long)phys_to_virt(x)
-
-#define vga_readb(x) (*(x))
-#define vga_writeb(x,y) (*(y) = (x))
-
-#endif /* _ASM_M32R_VGA_H */
+++ /dev/null
-#ifndef _ASM_M32R_XOR_H
-#define _ASM_M32R_XOR_H
-
-#include <asm-generic/xor.h>
-
-#endif /* _ASM_M32R_XOR_H */
+++ /dev/null
-proc
-unit
+++ /dev/null
-include include/asm-generic/Kbuild.asm
+++ /dev/null
-/* MN10300 Atomic counter operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_ATOMIC_H
-#define _ASM_ATOMIC_H
-
-#ifdef CONFIG_SMP
-#error not SMP safe
-#endif
-
-/*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
-#define ATOMIC_INIT(i) { (i) }
-
-#ifdef __KERNEL__
-
-/**
- * atomic_read - read atomic variable
- * @v: pointer of type atomic_t
- *
- * Atomically reads the value of @v. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_read(v) ((v)->counter)
-
-/**
- * atomic_set - set atomic variable
- * @v: pointer of type atomic_t
- * @i: required value
- *
- * Atomically sets the value of @v to @i. Note that the guaranteed
- * useful range of an atomic_t is only 24 bits.
- */
-#define atomic_set(v, i) (((v)->counter) = (i))
-
-#include <asm/system.h>
-
-/**
- * atomic_add_return - add integer to atomic variable
- * @i: integer value to add
- * @v: pointer of type atomic_t
- *
- * Atomically adds @i to @v and returns the result
- * Note that the guaranteed useful range of an atomic_t is only 24 bits.
- */
-static inline int atomic_add_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int temp;
-
- local_irq_save(flags);
- temp = v->counter;
- temp += i;
- v->counter = temp;
- local_irq_restore(flags);
-
- return temp;
-}
-
-/**
- * atomic_sub_return - subtract integer from atomic variable
- * @i: integer value to subtract
- * @v: pointer of type atomic_t
- *
- * Atomically subtracts @i from @v and returns the result
- * Note that the guaranteed useful range of an atomic_t is only 24 bits.
- */
-static inline int atomic_sub_return(int i, atomic_t *v)
-{
- unsigned long flags;
- int temp;
-
- local_irq_save(flags);
- temp = v->counter;
- temp -= i;
- v->counter = temp;
- local_irq_restore(flags);
-
- return temp;
-}
-
-static inline int atomic_add_negative(int i, atomic_t *v)
-{
- return atomic_add_return(i, v) < 0;
-}
-
-static inline void atomic_add(int i, atomic_t *v)
-{
- atomic_add_return(i, v);
-}
-
-static inline void atomic_sub(int i, atomic_t *v)
-{
- atomic_sub_return(i, v);
-}
-
-static inline void atomic_inc(atomic_t *v)
-{
- atomic_add_return(1, v);
-}
-
-static inline void atomic_dec(atomic_t *v)
-{
- atomic_sub_return(1, v);
-}
-
-#define atomic_dec_return(v) atomic_sub_return(1, (v))
-#define atomic_inc_return(v) atomic_add_return(1, (v))
-
-#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
-#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0)
-
-#define atomic_add_unless(v, a, u) \
-({ \
- int c, old; \
- c = atomic_read(v); \
- while (c != (u) && (old = atomic_cmpxchg((v), c, c + (a))) != c) \
- c = old; \
- c != (u); \
-})
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- mask = ~mask;
- local_irq_save(flags);
- *addr &= mask;
- local_irq_restore(flags);
-}
-
-#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
-#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-
-/* Atomic operations are already serializing on MN10300??? */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic.h>
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_ATOMIC_H */
+++ /dev/null
-#ifndef _ASM_AUXVEC_H
-#define _ASM_AUXVEC_H
-
-#endif
+++ /dev/null
-/* MN10300 bit operations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-#ifndef __ASM_BITOPS_H
-#define __ASM_BITOPS_H
-
-#include <asm/cpu-regs.h>
-
-#define smp_mb__before_clear_bit() barrier()
-#define smp_mb__after_clear_bit() barrier()
-
-/*
- * set bit
- */
-#define __set_bit(nr, addr) \
-({ \
- volatile unsigned char *_a = (unsigned char *)(addr); \
- const unsigned shift = (nr) & 7; \
- _a += (nr) >> 3; \
- \
- asm volatile("bset %2,(%1) # set_bit reg" \
- : "=m"(*_a) \
- : "a"(_a), "d"(1 << shift), "m"(*_a) \
- : "memory", "cc"); \
-})
-
-#define set_bit(nr, addr) __set_bit((nr), (addr))
-
-/*
- * clear bit
- */
-#define ___clear_bit(nr, addr) \
-({ \
- volatile unsigned char *_a = (unsigned char *)(addr); \
- const unsigned shift = (nr) & 7; \
- _a += (nr) >> 3; \
- \
- asm volatile("bclr %2,(%1) # clear_bit reg" \
- : "=m"(*_a) \
- : "a"(_a), "d"(1 << shift), "m"(*_a) \
- : "memory", "cc"); \
-})
-
-#define clear_bit(nr, addr) ___clear_bit((nr), (addr))
-
-
-static inline void __clear_bit(int nr, volatile void *addr)
-{
- unsigned int *a = (unsigned int *) addr;
- int mask;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- *a &= ~mask;
-}
-
-/*
- * test bit
- */
-static inline int test_bit(int nr, const volatile void *addr)
-{
- return 1UL & (((const unsigned int *) addr)[nr >> 5] >> (nr & 31));
-}
-
-/*
- * change bit
- */
-static inline void __change_bit(int nr, volatile void *addr)
-{
- int mask;
- unsigned int *a = (unsigned int *) addr;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- *a ^= mask;
-}
-
-extern void change_bit(int nr, volatile void *addr);
-
-/*
- * test and set bit
- */
-#define __test_and_set_bit(nr,addr) \
-({ \
- volatile unsigned char *_a = (unsigned char *)(addr); \
- const unsigned shift = (nr) & 7; \
- unsigned epsw; \
- _a += (nr) >> 3; \
- \
- asm volatile("bset %3,(%2) # test_set_bit reg\n" \
- "mov epsw,%1" \
- : "=m"(*_a), "=d"(epsw) \
- : "a"(_a), "d"(1 << shift), "m"(*_a) \
- : "memory", "cc"); \
- \
- !(epsw & EPSW_FLAG_Z); \
-})
-
-#define test_and_set_bit(nr, addr) __test_and_set_bit((nr), (addr))
-
-/*
- * test and clear bit
- */
-#define __test_and_clear_bit(nr, addr) \
-({ \
- volatile unsigned char *_a = (unsigned char *)(addr); \
- const unsigned shift = (nr) & 7; \
- unsigned epsw; \
- _a += (nr) >> 3; \
- \
- asm volatile("bclr %3,(%2) # test_clear_bit reg\n" \
- "mov epsw,%1" \
- : "=m"(*_a), "=d"(epsw) \
- : "a"(_a), "d"(1 << shift), "m"(*_a) \
- : "memory", "cc"); \
- \
- !(epsw & EPSW_FLAG_Z); \
-})
-
-#define test_and_clear_bit(nr, addr) __test_and_clear_bit((nr), (addr))
-
-/*
- * test and change bit
- */
-static inline int __test_and_change_bit(int nr, volatile void *addr)
-{
- int mask, retval;
- unsigned int *a = (unsigned int *)addr;
-
- a += nr >> 5;
- mask = 1 << (nr & 0x1f);
- retval = (mask & *a) != 0;
- *a ^= mask;
-
- return retval;
-}
-
-extern int test_and_change_bit(int nr, volatile void *addr);
-
-#include <asm-generic/bitops/lock.h>
-
-#ifdef __KERNEL__
-
-/**
- * __ffs - find first bit set
- * @x: the word to search
- *
- * - return 31..0 to indicate bit 31..0 most least significant bit set
- * - if no bits are set in x, the result is undefined
- */
-static inline __attribute__((const))
-unsigned long __ffs(unsigned long x)
-{
- int bit;
- asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(x & -x));
- return bit;
-}
-
-/*
- * special slimline version of fls() for calculating ilog2_u32()
- * - note: no protection against n == 0
- */
-static inline __attribute__((const))
-int __ilog2_u32(u32 n)
-{
- int bit;
- asm("bsch %2,%0" : "=r"(bit) : "0"(0), "r"(n));
- return bit;
-}
-
-/**
- * fls - find last bit set
- * @x: the word to search
- *
- * This is defined the same way as ffs:
- * - return 32..1 to indicate bit 31..0 most significant bit set
- * - return 0 to indicate no bits set
- */
-static inline __attribute__((const))
-int fls(int x)
-{
- return (x != 0) ? __ilog2_u32(x) + 1 : 0;
-}
-
-/**
- * __fls - find last (most-significant) set bit in a long word
- * @word: the word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
- return __ilog2_u32(word);
-}
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * - return 32..1 to indicate bit 31..0 most least significant bit set
- * - return 0 to indicate no bits set
- */
-static inline __attribute__((const))
-int ffs(int x)
-{
- /* Note: (x & -x) gives us a mask that is the least significant
- * (rightmost) 1-bit of the value in x.
- */
- return fls(x & -x);
-}
-
-#include <asm-generic/bitops/ffz.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-
-#define ext2_set_bit_atomic(lock, nr, addr) \
- test_and_set_bit((nr) ^ 0x18, (addr))
-#define ext2_clear_bit_atomic(lock, nr, addr) \
- test_and_clear_bit((nr) ^ 0x18, (addr))
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#include <asm-generic/bitops/minix-le.h>
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_BITOPS_H */
+++ /dev/null
-/* MN10300 Kernel bug reporting
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_BUG_H
-#define _ASM_BUG_H
-
-/*
- * Tell the user there is some problem.
- */
-#define _debug_bug_trap() \
-do { \
- asm volatile( \
- " syscall 15 \n" \
- "0: \n" \
- " .section __bug_table,\"a\" \n" \
- " .long 0b,%0,%1 \n" \
- " .previous \n" \
- : \
- : "i"(__FILE__), "i"(__LINE__) \
- ); \
-} while (0)
-
-#define BUG() _debug_bug_trap()
-
-#define HAVE_ARCH_BUG
-#include <asm-generic/bug.h>
-
-#endif /* _ASM_BUG_H */
+++ /dev/null
-/* MN10300 Checks for architecture-dependent bugs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_BUGS_H
-#define _ASM_BUGS_H
-
-#include <asm/processor.h>
-
-static inline void __init check_bugs(void)
-{
-}
-
-#endif /* _ASM_BUGS_H */
+++ /dev/null
-/* AM33v2 on-board bus controller registers
- *
- * Copyright (C) 2002 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_BUSCTL_REGS_H
-#define _ASM_BUSCTL_REGS_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/* bus controller registers */
-#define BCCR __SYSREG(0xc0002000, u32) /* bus controller control reg */
-#define BCCR_B0AD 0x00000003 /* block 0 (80000000-83ffffff) bus allocation */
-#define BCCR_B1AD 0x0000000c /* block 1 (84000000-87ffffff) bus allocation */
-#define BCCR_B2AD 0x00000030 /* block 2 (88000000-8bffffff) bus allocation */
-#define BCCR_B3AD 0x000000c0 /* block 3 (8c000000-8fffffff) bus allocation */
-#define BCCR_B4AD 0x00000300 /* block 4 (90000000-93ffffff) bus allocation */
-#define BCCR_B5AD 0x00000c00 /* block 5 (94000000-97ffffff) bus allocation */
-#define BCCR_B6AD 0x00003000 /* block 6 (98000000-9bffffff) bus allocation */
-#define BCCR_B7AD 0x0000c000 /* block 7 (9c000000-9fffffff) bus allocation */
-#define BCCR_BxAD_EXBUS 0x0 /* - direct to system bus controller */
-#define BCCR_BxAD_OPEXBUS 0x1 /* - direct to memory bus controller */
-#define BCCR_BxAD_OCMBUS 0x2 /* - direct to on chip memory */
-#define BCCR_API 0x00070000 /* bus arbitration priority */
-#define BCCR_API_DMACICD 0x00000000 /* - DMA > CI > CD */
-#define BCCR_API_DMACDCI 0x00010000 /* - DMA > CD > CI */
-#define BCCR_API_CICDDMA 0x00020000 /* - CI > CD > DMA */
-#define BCCR_API_CDCIDMA 0x00030000 /* - CD > CI > DMA */
-#define BCCR_API_ROUNDROBIN 0x00040000 /* - round robin */
-#define BCCR_BEPRI_DMACICD 0x00c00000 /* bus error address priority */
-#define BCCR_BEPRI_DMACDCI 0x00000000 /* - DMA > CI > CD */
-#define BCCR_BEPRI_CICDDMA 0x00400000 /* - DMA > CD > CI */
-#define BCCR_BEPRI_CDCIDMA 0x00800000 /* - CI > CD > DMA */
-#define BCCR_BEPRI 0x00c00000 /* - CD > CI > DMA */
-#define BCCR_TMON 0x03000000 /* timeout value settings */
-#define BCCR_TMON_16IOCLK 0x00000000 /* - 16 IOCLK cycles */
-#define BCCR_TMON_256IOCLK 0x01000000 /* - 256 IOCLK cycles */
-#define BCCR_TMON_4096IOCLK 0x02000000 /* - 4096 IOCLK cycles */
-#define BCCR_TMON_65536IOCLK 0x03000000 /* - 65536 IOCLK cycles */
-#define BCCR_TMOE 0x10000000 /* timeout detection enable */
-
-#define BCBERR __SYSREG(0xc0002010, u32) /* bus error source reg */
-#define BCBERR_BESB 0x0000001f /* erroneous access destination space */
-#define BCBERR_BESB_MON 0x00000001 /* - monitor space */
-#define BCBERR_BESB_IO 0x00000002 /* - IO bus */
-#define BCBERR_BESB_EX 0x00000004 /* - EX bus */
-#define BCBERR_BESB_OPEX 0x00000008 /* - OpEX bus */
-#define BCBERR_BESB_OCM 0x00000010 /* - on chip memory */
-#define BCBERR_BERW 0x00000100 /* type of access */
-#define BCBERR_BERW_WRITE 0x00000000 /* - write */
-#define BCBERR_BERW_READ 0x00000100 /* - read */
-#define BCBERR_BESD 0x00000200 /* error detector */
-#define BCBERR_BESD_BCU 0x00000000 /* - BCU detected error */
-#define BCBERR_BESD_SLAVE_BUS 0x00000200 /* - slave bus detected error */
-#define BCBERR_BEBST 0x00000400 /* type of access */
-#define BCBERR_BEBST_SINGLE 0x00000000 /* - single */
-#define BCBERR_BEBST_BURST 0x00000400 /* - burst */
-#define BCBERR_BEME 0x00000800 /* multiple bus error flag */
-#define BCBERR_BEMR 0x00007000 /* master bus that caused the error */
-#define BCBERR_BEMR_NOERROR 0x00000000 /* - no error */
-#define BCBERR_BEMR_CI 0x00001000 /* - CPU instruction fetch bus caused error */
-#define BCBERR_BEMR_CD 0x00002000 /* - CPU data bus caused error */
-#define BCBERR_BEMR_DMA 0x00004000 /* - DMA bus caused error */
-
-#define BCBEAR __SYSREGC(0xc0002020, u32) /* bus error address reg */
-
-/* system bus controller registers */
-#define SBBASE(X) __SYSREG(0xd8c00100 + (X) * 0x10, u32) /* SBC base addr regs */
-#define SBBASE_BE 0x00000001 /* bank enable */
-#define SBBASE_BAM 0x0000fffe /* bank address mask [31:17] */
-#define SBBASE_BBA 0xfffe0000 /* bank base address [31:17] */
-
-#define SBCNTRL0(X) __SYSREG(0xd8c00200 + (X) * 0x10, u32) /* SBC bank ctrl0 regs */
-#define SBCNTRL0_WEH 0x00000f00 /* write enable hold */
-#define SBCNTRL0_REH 0x0000f000 /* read enable hold */
-#define SBCNTRL0_RWH 0x000f0000 /* SRW signal hold */
-#define SBCNTRL0_CSH 0x00f00000 /* chip select hold */
-#define SBCNTRL0_DAH 0x0f000000 /* data hold */
-#define SBCNTRL0_ADH 0xf0000000 /* address hold */
-
-#define SBCNTRL1(X) __SYSREG(0xd8c00204 + (X) * 0x10, u32) /* SBC bank ctrl1 regs */
-#define SBCNTRL1_WED 0x00000f00 /* write enable delay */
-#define SBCNTRL1_RED 0x0000f000 /* read enable delay */
-#define SBCNTRL1_RWD 0x000f0000 /* SRW signal delay */
-#define SBCNTRL1_ASW 0x00f00000 /* address strobe width */
-#define SBCNTRL1_CSD 0x0f000000 /* chip select delay */
-#define SBCNTRL1_ASD 0xf0000000 /* address strobe delay */
-
-#define SBCNTRL2(X) __SYSREG(0xd8c00208 + (X) * 0x10, u32) /* SBC bank ctrl2 regs */
-#define SBCNTRL2_WC 0x000000ff /* wait count */
-#define SBCNTRL2_BWC 0x00000f00 /* burst wait count */
-#define SBCNTRL2_WM 0x01000000 /* wait mode setting */
-#define SBCNTRL2_WM_FIXEDWAIT 0x00000000 /* - fixed wait access */
-#define SBCNTRL2_WM_HANDSHAKE 0x01000000 /* - handshake access */
-#define SBCNTRL2_BM 0x02000000 /* bus synchronisation mode */
-#define SBCNTRL2_BM_SYNC 0x00000000 /* - synchronous mode */
-#define SBCNTRL2_BM_ASYNC 0x02000000 /* - asynchronous mode */
-#define SBCNTRL2_BW 0x04000000 /* bus width */
-#define SBCNTRL2_BW_32 0x00000000 /* - 32 bits */
-#define SBCNTRL2_BW_16 0x04000000 /* - 16 bits */
-#define SBCNTRL2_RWINV 0x08000000 /* R/W signal invert polarity */
-#define SBCNTRL2_RWINV_NORM 0x00000000 /* - normal (read high) */
-#define SBCNTRL2_RWINV_INV 0x08000000 /* - inverted (read low) */
-#define SBCNTRL2_BT 0x70000000 /* bus type setting */
-#define SBCNTRL2_BT_SRAM 0x00000000 /* - SRAM interface */
-#define SBCNTRL2_BT_ADMUX 0x00000000 /* - addr/data multiplexed interface */
-#define SBCNTRL2_BT_BROM 0x00000000 /* - burst ROM interface */
-#define SBCNTRL2_BTSE 0x80000000 /* burst enable */
-
-/* memory bus controller */
-#define SDBASE(X) __SYSREG(0xda000008 + (X) * 0x4, u32) /* MBC base addr regs */
-#define SDBASE_CE 0x00000001 /* chip enable */
-#define SDBASE_CBAM 0x0000fff0 /* chip base address mask [31:20] */
-#define SDBASE_CBAM_SHIFT 16
-#define SDBASE_CBA 0xfff00000 /* chip base address [31:20] */
-
-#define SDRAMBUS __SYSREG(0xda000000, u32) /* bus mode control reg */
-#define SDRAMBUS_REFEN 0x00000004 /* refresh enable */
-#define SDRAMBUS_TRC 0x00000018 /* refresh command delay time */
-#define SDRAMBUS_BSTPT 0x00000020 /* burst stop command enable */
-#define SDRAMBUS_PONSEQ 0x00000040 /* power on sequence */
-#define SDRAMBUS_SELFREQ 0x00000080 /* self-refresh mode request */
-#define SDRAMBUS_SELFON 0x00000100 /* self-refresh mode on */
-#define SDRAMBUS_SIZE 0x00030000 /* SDRAM size */
-#define SDRAMBUS_SIZE_64Mbit 0x00010000 /* 64Mbit SDRAM (x16) */
-#define SDRAMBUS_SIZE_128Mbit 0x00020000 /* 128Mbit SDRAM (x16) */
-#define SDRAMBUS_SIZE_256Mbit 0x00030000 /* 256Mbit SDRAM (x16) */
-#define SDRAMBUS_TRASWAIT 0x000c0000 /* row address precharge command cycle number */
-#define SDRAMBUS_REFNUM 0x00300000 /* refresh command number */
-#define SDRAMBUS_BSTWAIT 0x00c00000 /* burst stop command cycle */
-#define SDRAMBUS_SETWAIT 0x03000000 /* mode register setting command cycle */
-#define SDRAMBUS_PREWAIT 0x0c000000 /* precharge command cycle */
-#define SDRAMBUS_RASLATE 0x30000000 /* RAS latency */
-#define SDRAMBUS_CASLATE 0xc0000000 /* CAS latency */
-
-#define SDREFCNT __SYSREG(0xda000004, u32) /* refresh period reg */
-#define SDREFCNT_PERI 0x00000fff /* refresh period */
-
-#define SDSHDW __SYSREG(0xda000010, u32) /* test reg */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_BUSCTL_REGS_H */
+++ /dev/null
-#ifndef _ASM_BYTEORDER_H
-#define _ASM_BYTEORDER_H
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* _ASM_BYTEORDER_H */
+++ /dev/null
-/* MN10300 cache management registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_CACHE_H
-#define _ASM_CACHE_H
-
-#include <asm/cpu-regs.h>
-#include <asm/proc/cache.h>
-
-#ifndef __ASSEMBLY__
-#define L1_CACHE_DISPARITY (L1_CACHE_NENTRIES * L1_CACHE_BYTES)
-#else
-#define L1_CACHE_DISPARITY L1_CACHE_NENTRIES * L1_CACHE_BYTES
-#endif
-
-/* data cache purge registers
- * - read from the register to unconditionally purge that cache line
- * - write address & 0xffffff00 to conditionally purge that cache line
- * - clear LSB to request invalidation as well
- */
-#define DCACHE_PURGE(WAY, ENTRY) \
- __SYSREG(0xc8400000 + (WAY) * L1_CACHE_WAYDISP + \
- (ENTRY) * L1_CACHE_BYTES, u32)
-
-#define DCACHE_PURGE_WAY0(ENTRY) \
- __SYSREG(0xc8400000 + 0 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-#define DCACHE_PURGE_WAY1(ENTRY) \
- __SYSREG(0xc8400000 + 1 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-#define DCACHE_PURGE_WAY2(ENTRY) \
- __SYSREG(0xc8400000 + 2 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-#define DCACHE_PURGE_WAY3(ENTRY) \
- __SYSREG(0xc8400000 + 3 * L1_CACHE_WAYDISP + (ENTRY) * L1_CACHE_BYTES, u32)
-
-/* instruction cache access registers */
-#define ICACHE_DATA(WAY, ENTRY, OFF) \
- __SYSREG(0xc8000000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
-#define ICACHE_TAG(WAY, ENTRY) \
- __SYSREG(0xc8100000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
-
-/* instruction cache access registers */
-#define DCACHE_DATA(WAY, ENTRY, OFF) \
- __SYSREG(0xc8200000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10 + (OFF) * 4, u32)
-#define DCACHE_TAG(WAY, ENTRY) \
- __SYSREG(0xc8300000 + (WAY) * L1_CACHE_WAYDISP + (ENTRY) * 0x10, u32)
-
-#endif /* _ASM_CACHE_H */
+++ /dev/null
-/* MN10300 Cache flushing
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CACHEFLUSH_H
-#define _ASM_CACHEFLUSH_H
-
-#ifndef __ASSEMBLY__
-
-/* Keep includes the same across arches. */
-#include <linux/mm.h>
-
-/*
- * virtually-indexed cache managment (our cache is physically indexed)
- */
-#define flush_cache_all() do {} while (0)
-#define flush_cache_mm(mm) do {} while (0)
-#define flush_cache_dup_mm(mm) do {} while (0)
-#define flush_cache_range(mm, start, end) do {} while (0)
-#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
-#define flush_cache_vmap(start, end) do {} while (0)
-#define flush_cache_vunmap(start, end) do {} while (0)
-#define flush_dcache_page(page) do {} while (0)
-#define flush_dcache_mmap_lock(mapping) do {} while (0)
-#define flush_dcache_mmap_unlock(mapping) do {} while (0)
-
-/*
- * physically-indexed cache managment
- */
-#ifndef CONFIG_MN10300_CACHE_DISABLED
-
-extern void flush_icache_range(unsigned long start, unsigned long end);
-extern void flush_icache_page(struct vm_area_struct *vma, struct page *pg);
-
-#else
-
-#define flush_icache_range(start, end) do {} while (0)
-#define flush_icache_page(vma, pg) do {} while (0)
-
-#endif
-
-#define flush_icache_user_range(vma, pg, adr, len) \
- flush_icache_range(adr, adr + len)
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
- do { \
- memcpy(dst, src, len); \
- flush_icache_page(vma, page); \
- } while (0)
-
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-/*
- * primitive routines
- */
-#ifndef CONFIG_MN10300_CACHE_DISABLED
-extern void mn10300_icache_inv(void);
-extern void mn10300_dcache_inv(void);
-extern void mn10300_dcache_inv_page(unsigned start);
-extern void mn10300_dcache_inv_range(unsigned start, unsigned end);
-extern void mn10300_dcache_inv_range2(unsigned start, unsigned size);
-#ifdef CONFIG_MN10300_CACHE_WBACK
-extern void mn10300_dcache_flush(void);
-extern void mn10300_dcache_flush_page(unsigned start);
-extern void mn10300_dcache_flush_range(unsigned start, unsigned end);
-extern void mn10300_dcache_flush_range2(unsigned start, unsigned size);
-extern void mn10300_dcache_flush_inv(void);
-extern void mn10300_dcache_flush_inv_page(unsigned start);
-extern void mn10300_dcache_flush_inv_range(unsigned start, unsigned end);
-extern void mn10300_dcache_flush_inv_range2(unsigned start, unsigned size);
-#else
-#define mn10300_dcache_flush() do {} while (0)
-#define mn10300_dcache_flush_page(start) do {} while (0)
-#define mn10300_dcache_flush_range(start, end) do {} while (0)
-#define mn10300_dcache_flush_range2(start, size) do {} while (0)
-#define mn10300_dcache_flush_inv() mn10300_dcache_inv()
-#define mn10300_dcache_flush_inv_page(start) \
- mn10300_dcache_inv_page((start))
-#define mn10300_dcache_flush_inv_range(start, end) \
- mn10300_dcache_inv_range((start), (end))
-#define mn10300_dcache_flush_inv_range2(start, size) \
- mn10300_dcache_inv_range2((start), (size))
-#endif /* CONFIG_MN10300_CACHE_WBACK */
-#else
-#define mn10300_icache_inv() do {} while (0)
-#define mn10300_dcache_inv() do {} while (0)
-#define mn10300_dcache_inv_page(start) do {} while (0)
-#define mn10300_dcache_inv_range(start, end) do {} while (0)
-#define mn10300_dcache_inv_range2(start, size) do {} while (0)
-#define mn10300_dcache_flush() do {} while (0)
-#define mn10300_dcache_flush_inv_page(start) do {} while (0)
-#define mn10300_dcache_flush_inv() do {} while (0)
-#define mn10300_dcache_flush_inv_range(start, end) do {} while (0)
-#define mn10300_dcache_flush_inv_range2(start, size) do {} while (0)
-#define mn10300_dcache_flush_page(start) do {} while (0)
-#define mn10300_dcache_flush_range(start, end) do {} while (0)
-#define mn10300_dcache_flush_range2(start, size) do {} while (0)
-#endif /* CONFIG_MN10300_CACHE_DISABLED */
-
-/*
- * internal debugging function
- */
-#ifdef CONFIG_DEBUG_PAGEALLOC
-extern void kernel_map_pages(struct page *page, int numpages, int enable);
-#endif
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_CACHEFLUSH_H */
+++ /dev/null
-/* MN10300 Optimised checksumming code
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CHECKSUM_H
-#define _ASM_CHECKSUM_H
-
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
- int len, __wsum sum);
-extern __wsum csum_partial_copy_from_user(const void *src, void *dst,
- int len, __wsum sum,
- int *err_ptr);
-extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-#define csum_partial_copy_fromuser csum_partial_copy
-extern __wsum csum_partial_copy(const void *src, void *dst, int len,
- __wsum sum);
-
-static inline __sum16 csum_fold(__wsum sum)
-{
- asm(
- " add %1,%0 \n"
- " addc 0xffff,%0 \n"
- : "=r" (sum)
- : "r" (sum << 16), "0" (sum & 0xffff0000)
- : "cc"
- );
- return (~sum) >> 16;
-}
-
-static inline __wsum csum_tcpudp_nofold(unsigned long saddr,
- unsigned long daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
-{
- __wsum tmp;
-
- tmp = (__wsum) ntohs(len) << 16;
- tmp += (__wsum) proto << 8;
-
- asm(
- " add %1,%0 \n"
- " addc %2,%0 \n"
- " addc %3,%0 \n"
- " addc 0,%0 \n"
- : "=r" (sum)
- : "r" (daddr), "r"(saddr), "r"(tmp), "0"(sum)
- : "cc"
- );
- return sum;
-}
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __sum16 csum_tcpudp_magic(unsigned long saddr,
- unsigned long daddr,
- unsigned short len,
- unsigned short proto,
- __wsum sum)
-{
- return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
-}
-
-#undef _HAVE_ARCH_IPV6_CSUM
-
-/*
- * Copy and checksum to user
- */
-#define HAVE_CSUM_COPY_USER
-extern __wsum csum_and_copy_to_user(const void *src, void *dst, int len,
- __wsum sum, int *err_ptr);
-
-
-#endif /* _ASM_CHECKSUM_H */
+++ /dev/null
-/* MN10300 Core system registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CPU_REGS_H
-#define _ASM_CPU_REGS_H
-
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-#endif
-
-#ifdef CONFIG_MN10300_CPU_AM33V2
-/* we tell the compiler to pretend to be AM33 so that it doesn't try and use
- * the FP regs, but tell the assembler that we're actually allowed AM33v2
- * instructions */
-#ifndef __ASSEMBLY__
-asm(" .am33_2\n");
-#else
-.am33_2
-#endif
-#endif
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-#define __SYSREG(ADDR, TYPE) (*(volatile TYPE *)(ADDR))
-#define __SYSREGC(ADDR, TYPE) (*(const volatile TYPE *)(ADDR))
-#else
-#define __SYSREG(ADDR, TYPE) ADDR
-#define __SYSREGC(ADDR, TYPE) ADDR
-#endif
-
-/* CPU registers */
-#define EPSW_FLAG_Z 0x00000001 /* zero flag */
-#define EPSW_FLAG_N 0x00000002 /* negative flag */
-#define EPSW_FLAG_C 0x00000004 /* carry flag */
-#define EPSW_FLAG_V 0x00000008 /* overflow flag */
-#define EPSW_IM 0x00000700 /* interrupt mode */
-#define EPSW_IM_0 0x00000000 /* interrupt mode 0 */
-#define EPSW_IM_1 0x00000100 /* interrupt mode 1 */
-#define EPSW_IM_2 0x00000200 /* interrupt mode 2 */
-#define EPSW_IM_3 0x00000300 /* interrupt mode 3 */
-#define EPSW_IM_4 0x00000400 /* interrupt mode 4 */
-#define EPSW_IM_5 0x00000500 /* interrupt mode 5 */
-#define EPSW_IM_6 0x00000600 /* interrupt mode 6 */
-#define EPSW_IM_7 0x00000700 /* interrupt mode 7 */
-#define EPSW_IE 0x00000800 /* interrupt enable */
-#define EPSW_S 0x00003000 /* software auxilliary bits */
-#define EPSW_T 0x00008000 /* trace enable */
-#define EPSW_nSL 0x00010000 /* not supervisor level */
-#define EPSW_NMID 0x00020000 /* nonmaskable interrupt disable */
-#define EPSW_nAR 0x00040000 /* register bank control */
-#define EPSW_ML 0x00080000 /* monitor level */
-#define EPSW_FE 0x00100000 /* FPU enable */
-
-/* FPU registers */
-#define FPCR_EF_I 0x00000001 /* inexact result FPU exception flag */
-#define FPCR_EF_U 0x00000002 /* underflow FPU exception flag */
-#define FPCR_EF_O 0x00000004 /* overflow FPU exception flag */
-#define FPCR_EF_Z 0x00000008 /* zero divide FPU exception flag */
-#define FPCR_EF_V 0x00000010 /* invalid operand FPU exception flag */
-#define FPCR_EE_I 0x00000020 /* inexact result FPU exception enable */
-#define FPCR_EE_U 0x00000040 /* underflow FPU exception enable */
-#define FPCR_EE_O 0x00000080 /* overflow FPU exception enable */
-#define FPCR_EE_Z 0x00000100 /* zero divide FPU exception enable */
-#define FPCR_EE_V 0x00000200 /* invalid operand FPU exception enable */
-#define FPCR_EC_I 0x00000400 /* inexact result FPU exception cause */
-#define FPCR_EC_U 0x00000800 /* underflow FPU exception cause */
-#define FPCR_EC_O 0x00001000 /* overflow FPU exception cause */
-#define FPCR_EC_Z 0x00002000 /* zero divide FPU exception cause */
-#define FPCR_EC_V 0x00004000 /* invalid operand FPU exception cause */
-#define FPCR_RM 0x00030000 /* rounding mode */
-#define FPCR_RM_NEAREST 0x00000000 /* - round to nearest value */
-#define FPCR_FCC_U 0x00040000 /* FPU unordered condition code */
-#define FPCR_FCC_E 0x00080000 /* FPU equal condition code */
-#define FPCR_FCC_G 0x00100000 /* FPU greater than condition code */
-#define FPCR_FCC_L 0x00200000 /* FPU less than condition code */
-#define FPCR_INIT 0x00000000 /* no exceptions, rounding to nearest */
-
-/* CPU control registers */
-#define CPUP __SYSREG(0xc0000020, u16) /* CPU pipeline register */
-#define CPUP_DWBD 0x0020 /* write buffer disable flag */
-#define CPUP_IPFD 0x0040 /* instruction prefetch disable flag */
-#define CPUP_EXM 0x0080 /* exception operation mode */
-#define CPUP_EXM_AM33V1 0x0000 /* - AM33 v1 exception mode */
-#define CPUP_EXM_AM33V2 0x0080 /* - AM33 v2 exception mode */
-
-#define CPUM __SYSREG(0xc0000040, u16) /* CPU mode register */
-#define CPUM_SLEEP 0x0004 /* set to enter sleep state */
-#define CPUM_HALT 0x0008 /* set to enter halt state */
-#define CPUM_STOP 0x0010 /* set to enter stop state */
-
-#define CPUREV __SYSREGC(0xc0000050, u32) /* CPU revision register */
-#define CPUREV_TYPE 0x0000000f /* CPU type */
-#define CPUREV_TYPE_S 0
-#define CPUREV_TYPE_AM33V1 0x00000000 /* - AM33 V1 core, AM33/1.00 arch */
-#define CPUREV_TYPE_AM33V2 0x00000001 /* - AM33 V2 core, AM33/2.00 arch */
-#define CPUREV_TYPE_AM34V1 0x00000002 /* - AM34 V1 core, AM33/2.00 arch */
-#define CPUREV_REVISION 0x000000f0 /* CPU revision */
-#define CPUREV_REVISION_S 4
-#define CPUREV_ICWAY 0x00000f00 /* number of instruction cache ways */
-#define CPUREV_ICWAY_S 8
-#define CPUREV_ICSIZE 0x0000f000 /* instruction cache way size */
-#define CPUREV_ICSIZE_S 12
-#define CPUREV_DCWAY 0x000f0000 /* number of data cache ways */
-#define CPUREV_DCWAY_S 16
-#define CPUREV_DCSIZE 0x00f00000 /* data cache way size */
-#define CPUREV_DCSIZE_S 20
-#define CPUREV_FPUTYPE 0x0f000000 /* FPU core type */
-#define CPUREV_FPUTYPE_NONE 0x00000000 /* - no FPU core implemented */
-#define CPUREV_OCDCTG 0xf0000000 /* on-chip debug function category */
-
-#define DCR __SYSREG(0xc0000030, u16) /* Debug control register */
-
-/* interrupt/exception control registers */
-#define IVAR0 __SYSREG(0xc0000000, u16) /* interrupt vector 0 */
-#define IVAR1 __SYSREG(0xc0000004, u16) /* interrupt vector 1 */
-#define IVAR2 __SYSREG(0xc0000008, u16) /* interrupt vector 2 */
-#define IVAR3 __SYSREG(0xc000000c, u16) /* interrupt vector 3 */
-#define IVAR4 __SYSREG(0xc0000010, u16) /* interrupt vector 4 */
-#define IVAR5 __SYSREG(0xc0000014, u16) /* interrupt vector 5 */
-#define IVAR6 __SYSREG(0xc0000018, u16) /* interrupt vector 6 */
-
-#define TBR __SYSREG(0xc0000024, u32) /* Trap table base */
-#define TBR_TB 0xff000000 /* table base address bits 31-24 */
-#define TBR_INT_CODE 0x00ffffff /* interrupt code */
-
-#define DEAR __SYSREG(0xc0000038, u32) /* Data access exception address */
-
-#define sISR __SYSREG(0xc0000044, u32) /* Supervisor interrupt status */
-#define sISR_IRQICE 0x00000001 /* ICE interrupt */
-#define sISR_ISTEP 0x00000002 /* single step interrupt */
-#define sISR_MISSA 0x00000004 /* memory access address misalignment fault */
-#define sISR_UNIMP 0x00000008 /* unimplemented instruction execution fault */
-#define sISR_PIEXE 0x00000010 /* program interrupt */
-#define sISR_MEMERR 0x00000020 /* illegal memory access fault */
-#define sISR_IBREAK 0x00000040 /* instraction break interrupt */
-#define sISR_DBSRL 0x00000080 /* debug serial interrupt */
-#define sISR_PERIDB 0x00000100 /* peripheral debug interrupt */
-#define sISR_EXUNIMP 0x00000200 /* unimplemented ex-instruction execution fault */
-#define sISR_OBREAK 0x00000400 /* operand break interrupt */
-#define sISR_PRIV 0x00000800 /* privileged instruction execution fault */
-#define sISR_BUSERR 0x00001000 /* bus error fault */
-#define sISR_DBLFT 0x00002000 /* double fault */
-#define sISR_DBG 0x00008000 /* debug reserved interrupt */
-#define sISR_ITMISS 0x00010000 /* instruction TLB miss */
-#define sISR_DTMISS 0x00020000 /* data TLB miss */
-#define sISR_ITEX 0x00040000 /* instruction TLB access exception */
-#define sISR_DTEX 0x00080000 /* data TLB access exception */
-#define sISR_ILGIA 0x00100000 /* illegal instruction access exception */
-#define sISR_ILGDA 0x00200000 /* illegal data access exception */
-#define sISR_IOIA 0x00400000 /* internal I/O space instruction access excep */
-#define sISR_PRIVA 0x00800000 /* privileged space instruction access excep */
-#define sISR_PRIDA 0x01000000 /* privileged space data access excep */
-#define sISR_DISA 0x02000000 /* data space instruction access excep */
-#define sISR_SYSC 0x04000000 /* system call instruction excep */
-#define sISR_FPUD 0x08000000 /* FPU disabled excep */
-#define sISR_FPUUI 0x10000000 /* FPU unimplemented instruction excep */
-#define sISR_FPUOP 0x20000000 /* FPU operation excep */
-#define sISR_NE 0x80000000 /* multiple synchronous exceptions excep */
-
-/* cache control registers */
-#define CHCTR __SYSREG(0xc0000070, u16) /* cache control */
-#define CHCTR_ICEN 0x0001 /* instruction cache enable */
-#define CHCTR_DCEN 0x0002 /* data cache enable */
-#define CHCTR_ICBUSY 0x0004 /* instruction cache busy */
-#define CHCTR_DCBUSY 0x0008 /* data cache busy */
-#define CHCTR_ICINV 0x0010 /* instruction cache invalidate */
-#define CHCTR_DCINV 0x0020 /* data cache invalidate */
-#define CHCTR_DCWTMD 0x0040 /* data cache writing mode */
-#define CHCTR_DCWTMD_WRBACK 0x0000 /* - write back mode */
-#define CHCTR_DCWTMD_WRTHROUGH 0x0040 /* - write through mode */
-#define CHCTR_DCALMD 0x0080 /* data cache allocation mode */
-#define CHCTR_ICWMD 0x0f00 /* instruction cache way mode */
-#define CHCTR_DCWMD 0xf000 /* data cache way mode */
-
-/* MMU control registers */
-#define MMUCTR __SYSREG(0xc0000090, u32) /* MMU control register */
-#define MMUCTR_IRP 0x0000003f /* instruction TLB replace pointer */
-#define MMUCTR_ITE 0x00000040 /* instruction TLB enable */
-#define MMUCTR_IIV 0x00000080 /* instruction TLB invalidate */
-#define MMUCTR_ITL 0x00000700 /* instruction TLB lock pointer */
-#define MMUCTR_ITL_NOLOCK 0x00000000 /* - no lock */
-#define MMUCTR_ITL_LOCK0 0x00000100 /* - entry 0 locked */
-#define MMUCTR_ITL_LOCK0_1 0x00000200 /* - entry 0-1 locked */
-#define MMUCTR_ITL_LOCK0_3 0x00000300 /* - entry 0-3 locked */
-#define MMUCTR_ITL_LOCK0_7 0x00000400 /* - entry 0-7 locked */
-#define MMUCTR_ITL_LOCK0_15 0x00000500 /* - entry 0-15 locked */
-#define MMUCTR_CE 0x00008000 /* cacheable bit enable */
-#define MMUCTR_DRP 0x003f0000 /* data TLB replace pointer */
-#define MMUCTR_DTE 0x00400000 /* data TLB enable */
-#define MMUCTR_DIV 0x00800000 /* data TLB invalidate */
-#define MMUCTR_DTL 0x07000000 /* data TLB lock pointer */
-#define MMUCTR_DTL_NOLOCK 0x00000000 /* - no lock */
-#define MMUCTR_DTL_LOCK0 0x01000000 /* - entry 0 locked */
-#define MMUCTR_DTL_LOCK0_1 0x02000000 /* - entry 0-1 locked */
-#define MMUCTR_DTL_LOCK0_3 0x03000000 /* - entry 0-3 locked */
-#define MMUCTR_DTL_LOCK0_7 0x04000000 /* - entry 0-7 locked */
-#define MMUCTR_DTL_LOCK0_15 0x05000000 /* - entry 0-15 locked */
-
-#define PIDR __SYSREG(0xc0000094, u16) /* PID register */
-#define PIDR_PID 0x00ff /* process identifier */
-
-#define PTBR __SYSREG(0xc0000098, unsigned long) /* Page table base register */
-
-#define IPTEL __SYSREG(0xc00000a0, u32) /* instruction TLB entry */
-#define DPTEL __SYSREG(0xc00000b0, u32) /* data TLB entry */
-#define xPTEL_V 0x00000001 /* TLB entry valid */
-#define xPTEL_UNUSED1 0x00000002 /* unused bit */
-#define xPTEL_UNUSED2 0x00000004 /* unused bit */
-#define xPTEL_C 0x00000008 /* cached if set */
-#define xPTEL_PV 0x00000010 /* page valid */
-#define xPTEL_D 0x00000020 /* dirty */
-#define xPTEL_PR 0x000001c0 /* page protection */
-#define xPTEL_PR_ROK 0x00000000 /* - R/O kernel */
-#define xPTEL_PR_RWK 0x00000100 /* - R/W kernel */
-#define xPTEL_PR_ROK_ROU 0x00000080 /* - R/O kernel and R/O user */
-#define xPTEL_PR_RWK_ROU 0x00000180 /* - R/W kernel and R/O user */
-#define xPTEL_PR_RWK_RWU 0x000001c0 /* - R/W kernel and R/W user */
-#define xPTEL_G 0x00000200 /* global (use PID if 0) */
-#define xPTEL_PS 0x00000c00 /* page size */
-#define xPTEL_PS_4Kb 0x00000000 /* - 4Kb page */
-#define xPTEL_PS_128Kb 0x00000400 /* - 128Kb page */
-#define xPTEL_PS_1Kb 0x00000800 /* - 1Kb page */
-#define xPTEL_PS_4Mb 0x00000c00 /* - 4Mb page */
-#define xPTEL_PPN 0xfffff006 /* physical page number */
-
-#define xPTEL_V_BIT 0 /* bit numbers corresponding to above masks */
-#define xPTEL_UNUSED1_BIT 1
-#define xPTEL_UNUSED2_BIT 2
-#define xPTEL_C_BIT 3
-#define xPTEL_PV_BIT 4
-#define xPTEL_D_BIT 5
-#define xPTEL_G_BIT 9
-
-#define IPTEU __SYSREG(0xc00000a4, u32) /* instruction TLB virtual addr */
-#define DPTEU __SYSREG(0xc00000b4, u32) /* data TLB virtual addr */
-#define xPTEU_VPN 0xfffffc00 /* virtual page number */
-#define xPTEU_PID 0x000000ff /* process identifier to which applicable */
-
-#define IPTEL2 __SYSREG(0xc00000a8, u32) /* instruction TLB entry */
-#define DPTEL2 __SYSREG(0xc00000b8, u32) /* data TLB entry */
-#define xPTEL2_V 0x00000001 /* TLB entry valid */
-#define xPTEL2_C 0x00000002 /* cacheable */
-#define xPTEL2_PV 0x00000004 /* page valid */
-#define xPTEL2_D 0x00000008 /* dirty */
-#define xPTEL2_PR 0x00000070 /* page protection */
-#define xPTEL2_PR_ROK 0x00000000 /* - R/O kernel */
-#define xPTEL2_PR_RWK 0x00000040 /* - R/W kernel */
-#define xPTEL2_PR_ROK_ROU 0x00000020 /* - R/O kernel and R/O user */
-#define xPTEL2_PR_RWK_ROU 0x00000060 /* - R/W kernel and R/O user */
-#define xPTEL2_PR_RWK_RWU 0x00000070 /* - R/W kernel and R/W user */
-#define xPTEL2_G 0x00000080 /* global (use PID if 0) */
-#define xPTEL2_PS 0x00000300 /* page size */
-#define xPTEL2_PS_4Kb 0x00000000 /* - 4Kb page */
-#define xPTEL2_PS_128Kb 0x00000100 /* - 128Kb page */
-#define xPTEL2_PS_1Kb 0x00000200 /* - 1Kb page */
-#define xPTEL2_PS_4Mb 0x00000300 /* - 4Mb page */
-#define xPTEL2_PPN 0xfffffc00 /* physical page number */
-
-#define MMUFCR __SYSREGC(0xc000009c, u32) /* MMU exception cause */
-#define MMUFCR_IFC __SYSREGC(0xc000009c, u16) /* MMU instruction excep cause */
-#define MMUFCR_DFC __SYSREGC(0xc000009e, u16) /* MMU data exception cause */
-#define MMUFCR_xFC_TLBMISS 0x0001 /* TLB miss flag */
-#define MMUFCR_xFC_INITWR 0x0002 /* initial write excep flag */
-#define MMUFCR_xFC_PGINVAL 0x0004 /* page invalid excep flag */
-#define MMUFCR_xFC_PROTVIOL 0x0008 /* protection violation excep flag */
-#define MMUFCR_xFC_ACCESS 0x0010 /* access level flag */
-#define MMUFCR_xFC_ACCESS_USR 0x0000 /* - user mode */
-#define MMUFCR_xFC_ACCESS_SR 0x0010 /* - supervisor mode */
-#define MMUFCR_xFC_TYPE 0x0020 /* access type flag */
-#define MMUFCR_xFC_TYPE_READ 0x0000 /* - read */
-#define MMUFCR_xFC_TYPE_WRITE 0x0020 /* - write */
-#define MMUFCR_xFC_PR 0x01c0 /* page protection flag */
-#define MMUFCR_xFC_PR_ROK 0x0000 /* - R/O kernel */
-#define MMUFCR_xFC_PR_RWK 0x0100 /* - R/W kernel */
-#define MMUFCR_xFC_PR_ROK_ROU 0x0080 /* - R/O kernel and R/O user */
-#define MMUFCR_xFC_PR_RWK_ROU 0x0180 /* - R/W kernel and R/O user */
-#define MMUFCR_xFC_PR_RWK_RWU 0x01c0 /* - R/W kernel and R/W user */
-#define MMUFCR_xFC_ILLADDR 0x0200 /* illegal address excep flag */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_CPU_REGS_H */
+++ /dev/null
-#include <asm-generic/cputime.h>
+++ /dev/null
-/* MN10300 Current task structure accessor
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_CURRENT_H
-#define _ASM_CURRENT_H
-
-#include <linux/thread_info.h>
-
-/*
- * dedicate E2 to keeping the current task pointer
- */
-#ifdef CONFIG_MN10300_CURRENT_IN_E2
-
-register struct task_struct *const current asm("e2") __attribute__((used));
-
-#define get_current() current
-
-extern struct task_struct *__current;
-
-#else
-static inline __attribute__((const))
-struct task_struct *get_current(void)
-{
- return current_thread_info()->task;
-}
-
-#define current get_current()
-#endif
-
-#endif /* _ASM_CURRENT_H */
+++ /dev/null
-/* MN10300 Uninterruptible delay routines
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DELAY_H
-#define _ASM_DELAY_H
-
-extern void __udelay(unsigned long usecs);
-extern void __delay(unsigned long loops);
-
-#define udelay(n) __udelay(n)
-
-#endif /* _ASM_DELAY_H */
+++ /dev/null
-#include <asm-generic/device.h>
+++ /dev/null
-/* MN10300 64-bit division
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DIV64
-#define _ASM_DIV64
-
-#include <linux/types.h>
-
-extern void ____unhandled_size_in_do_div___(void);
-
-/*
- * divide n by base, leaving the result in n and returning the remainder
- * - we can do this quite efficiently on the MN10300 by cascading the divides
- * through the MDR register
- */
-#define do_div(n, base) \
-({ \
- unsigned __rem = 0; \
- if (sizeof(n) <= 4) { \
- asm("mov %1,mdr \n" \
- "divu %2,%0 \n" \
- "mov mdr,%1 \n" \
- : "+r"(n), "=d"(__rem) \
- : "r"(base), "1"(__rem) \
- : "cc" \
- ); \
- } else if (sizeof(n) <= 8) { \
- union { \
- unsigned long long l; \
- u32 w[2]; \
- } __quot; \
- __quot.l = n; \
- asm("mov %0,mdr \n" /* MDR = 0 */ \
- "divu %3,%1 \n" \
- /* __quot.MSL = __div.MSL / base, */ \
- /* MDR = MDR:__div.MSL % base */ \
- "divu %3,%2 \n" \
- /* __quot.LSL = MDR:__div.LSL / base, */ \
- /* MDR = MDR:__div.LSL % base */ \
- "mov mdr,%0 \n" \
- : "=d"(__rem), "=r"(__quot.w[1]), "=r"(__quot.w[0]) \
- : "r"(base), "0"(__rem), "1"(__quot.w[1]), \
- "2"(__quot.w[0]) \
- : "cc" \
- ); \
- n = __quot.l; \
- } else { \
- ____unhandled_size_in_do_div___(); \
- } \
- __rem; \
-})
-
-/*
- * do an unsigned 32-bit multiply and divide with intermediate 64-bit product
- * so as not to lose accuracy
- * - we use the MDR register to hold the MSW of the product
- */
-static inline __attribute__((const))
-unsigned __muldiv64u(unsigned val, unsigned mult, unsigned div)
-{
- unsigned result;
-
- asm("mulu %2,%0 \n" /* MDR:val = val*mult */
- "divu %3,%0 \n" /* val = MDR:val/div;
- * MDR = MDR:val%div */
- : "=r"(result)
- : "0"(val), "ir"(mult), "r"(div)
- );
-
- return result;
-}
-
-/*
- * do a signed 32-bit multiply and divide with intermediate 64-bit product so
- * as not to lose accuracy
- * - we use the MDR register to hold the MSW of the product
- */
-static inline __attribute__((const))
-signed __muldiv64s(signed val, signed mult, signed div)
-{
- signed result;
-
- asm("mul %2,%0 \n" /* MDR:val = val*mult */
- "div %3,%0 \n" /* val = MDR:val/div;
- * MDR = MDR:val%div */
- : "=r"(result)
- : "0"(val), "ir"(mult), "r"(div)
- );
-
- return result;
-}
-
-#endif /* _ASM_DIV64 */
+++ /dev/null
-/* DMA mapping routines for the MN10300 arch
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMA_MAPPING_H
-#define _ASM_DMA_MAPPING_H
-
-#include <linux/mm.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cache.h>
-#include <asm/io.h>
-
-extern void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag);
-
-extern void dma_free_coherent(struct device *dev, size_t size,
- void *vaddr, dma_addr_t dma_handle);
-
-#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent((d), (s), (h), (f))
-#define dma_free_noncoherent(d, s, v, h) dma_free_coherent((d), (s), (v), (h))
-
-/*
- * Map a single buffer of the indicated size for DMA in streaming mode. The
- * 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory until
- * either pci_unmap_single or pci_dma_sync_single is performed.
- */
-static inline
-dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
- mn10300_dcache_flush_inv();
- return virt_to_bus(ptr);
-}
-
-/*
- * Unmap a single streaming mode DMA translation. The dma_addr and size must
- * match what was provided for in a previous pci_map_single call. All other
- * usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guarenteed to see
- * whatever the device wrote there.
- */
-static inline
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-}
-
-/*
- * Map a set of buffers described by scatterlist in streaming mode for DMA.
- * This is the scather-gather version of the above pci_map_single interface.
- * Here the scatter gather list elements are each tagged with the appropriate
- * dma address and length. They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of DMA
- * address/length pairs than there are SG table elements. (for example
- * via virtual mapping capabilities) The routine returns the number of
- * addr/length pairs actually used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are the same
- * here.
- */
-static inline
-int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
- enum dma_data_direction direction)
-{
- struct scatterlist *sg;
- int i;
-
- BUG_ON(!valid_dma_direction(direction));
- WARN_ON(nents == 0 || sglist[0].length == 0);
-
- for_each_sg(sglist, sg, nents, i) {
- BUG_ON(!sg_page(sg));
-
- sg->dma_address = sg_phys(sg);
- }
-
- mn10300_dcache_flush_inv();
- return nents;
-}
-
-/*
- * Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static inline
-void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
- enum dma_data_direction direction)
-{
- BUG_ON(!valid_dma_direction(direction));
-}
-
-/*
- * pci_{map,unmap}_single_page maps a kernel page to a dma_addr_t. identical
- * to pci_map_single, but takes a struct page instead of a virtual address
- */
-static inline
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
- return page_to_bus(page) + offset;
-}
-
-static inline
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-}
-
-/*
- * Make physical memory consistent for a single streaming mode DMA translation
- * after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the buffer using
- * the cpu, yet do not wish to teardown the PCI dma mapping, you must call this
- * function before doing so. At the next point you give the PCI dma address
- * back to the card, the device again owns the buffer.
- */
-static inline
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
- size_t size, enum dma_data_direction direction)
-{
- mn10300_dcache_flush_inv();
-}
-
-static inline
-void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
-}
-
-static inline void
-dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
- unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- mn10300_dcache_flush_inv();
-}
-
-
-/*
- * Make physical memory consistent for a set of streaming mode DMA translations
- * after a transfer.
- *
- * The same as pci_dma_sync_single but for a scatter-gather list, same rules
- * and usage.
- */
-static inline
-void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
- int nelems, enum dma_data_direction direction)
-{
-}
-
-static inline
-void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
- int nelems, enum dma_data_direction direction)
-{
- mn10300_dcache_flush_inv();
-}
-
-static inline
-int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
-{
- return 0;
-}
-
-/*
- * Return whether the given PCI device DMA address mask can be supported
- * properly. For example, if your device can only drive the low 24-bits during
- * PCI bus mastering, then you would pass 0x00ffffff as the mask to this
- * function.
- */
-static inline
-int dma_supported(struct device *dev, u64 mask)
-{
- /*
- * we fall back to GFP_DMA when the mask isn't all 1s, so we can't
- * guarantee allocations that must be within a tighter range than
- * GFP_DMA
- */
- if (mask < 0x00ffffff)
- return 0;
- return 1;
-}
-
-static inline
-int dma_set_mask(struct device *dev, u64 mask)
-{
- if (!dev->dma_mask || !dma_supported(dev, mask))
- return -EIO;
-
- *dev->dma_mask = mask;
- return 0;
-}
-
-static inline
-int dma_get_cache_alignment(void)
-{
- return 1 << L1_CACHE_SHIFT;
-}
-
-#define dma_is_consistent(d) (1)
-
-static inline
-void dma_cache_sync(void *vaddr, size_t size,
- enum dma_data_direction direction)
-{
- mn10300_dcache_flush_inv();
-}
-
-#endif
+++ /dev/null
-/* MN10300 ISA DMA handlers and definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMA_H
-#define _ASM_DMA_H
-
-#include <asm/system.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */
-#define MAX_DMA_ADDRESS 0xbfffffff
-
-extern spinlock_t dma_spin_lock;
-
-static inline unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
- spin_lock_irqsave(&dma_spin_lock, flags);
- return flags;
-}
-
-static inline void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static inline void enable_dma(unsigned int dmanr)
-{
-}
-
-static inline void disable_dma(unsigned int dmanr)
-{
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static inline void clear_dma_ff(unsigned int dmanr)
-{
-}
-
-/* set mode (above) for a specific DMA channel */
-static inline void set_dma_mode(unsigned int dmanr, char mode)
-{
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static inline void set_dma_page(unsigned int dmanr, char pagenr)
-{
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static inline void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static inline int get_dma_residue(unsigned int dmanr)
-{
- return 0;
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char *device_id);
-extern void free_dma(unsigned int dmanr);
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* _ASM_DMA_H */
+++ /dev/null
-/* MN10300 on-board DMA controller registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_DMACTL_REGS_H
-#define _ASM_DMACTL_REGS_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/* DMA registers */
-#define DMxCTR(N) __SYSREG(0xd2000000 + ((N) * 0x100), u32) /* control reg */
-#define DMxCTR_BG 0x0000001f /* transfer request source */
-#define DMxCTR_BG_SOFT 0x00000000 /* - software source */
-#define DMxCTR_BG_SC0TX 0x00000002 /* - serial port 0 transmission */
-#define DMxCTR_BG_SC0RX 0x00000003 /* - serial port 0 reception */
-#define DMxCTR_BG_SC1TX 0x00000004 /* - serial port 1 transmission */
-#define DMxCTR_BG_SC1RX 0x00000005 /* - serial port 1 reception */
-#define DMxCTR_BG_SC2TX 0x00000006 /* - serial port 2 transmission */
-#define DMxCTR_BG_SC2RX 0x00000007 /* - serial port 2 reception */
-#define DMxCTR_BG_TM0UFLOW 0x00000008 /* - timer 0 underflow */
-#define DMxCTR_BG_TM1UFLOW 0x00000009 /* - timer 1 underflow */
-#define DMxCTR_BG_TM2UFLOW 0x0000000a /* - timer 2 underflow */
-#define DMxCTR_BG_TM3UFLOW 0x0000000b /* - timer 3 underflow */
-#define DMxCTR_BG_TM6ACMPCAP 0x0000000c /* - timer 6A compare/capture */
-#define DMxCTR_BG_AFE 0x0000000d /* - analogue front-end interrupt source */
-#define DMxCTR_BG_ADC 0x0000000e /* - A/D conversion end interrupt source */
-#define DMxCTR_BG_IRDA 0x0000000f /* - IrDA interrupt source */
-#define DMxCTR_BG_RTC 0x00000010 /* - RTC interrupt source */
-#define DMxCTR_BG_XIRQ0 0x00000011 /* - XIRQ0 pin interrupt source */
-#define DMxCTR_BG_XIRQ1 0x00000012 /* - XIRQ1 pin interrupt source */
-#define DMxCTR_BG_XDMR0 0x00000013 /* - external request 0 source (XDMR0 pin) */
-#define DMxCTR_BG_XDMR1 0x00000014 /* - external request 1 source (XDMR1 pin) */
-#define DMxCTR_SAM 0x000000e0 /* DMA transfer src addr mode */
-#define DMxCTR_SAM_INCR 0x00000000 /* - increment */
-#define DMxCTR_SAM_DECR 0x00000020 /* - decrement */
-#define DMxCTR_SAM_FIXED 0x00000040 /* - fixed */
-#define DMxCTR_DAM 0x00000000 /* DMA transfer dest addr mode */
-#define DMxCTR_DAM_INCR 0x00000000 /* - increment */
-#define DMxCTR_DAM_DECR 0x00000100 /* - decrement */
-#define DMxCTR_DAM_FIXED 0x00000200 /* - fixed */
-#define DMxCTR_TM 0x00001800 /* DMA transfer mode */
-#define DMxCTR_TM_BATCH 0x00000000 /* - batch transfer */
-#define DMxCTR_TM_INTERM 0x00001000 /* - intermittent transfer */
-#define DMxCTR_UT 0x00006000 /* DMA transfer unit */
-#define DMxCTR_UT_1 0x00000000 /* - 1 byte */
-#define DMxCTR_UT_2 0x00002000 /* - 2 byte */
-#define DMxCTR_UT_4 0x00004000 /* - 4 byte */
-#define DMxCTR_UT_16 0x00006000 /* - 16 byte */
-#define DMxCTR_TEN 0x00010000 /* DMA channel transfer enable */
-#define DMxCTR_RQM 0x00060000 /* external request input source mode */
-#define DMxCTR_RQM_FALLEDGE 0x00000000 /* - falling edge */
-#define DMxCTR_RQM_RISEEDGE 0x00020000 /* - rising edge */
-#define DMxCTR_RQM_LOLEVEL 0x00040000 /* - low level */
-#define DMxCTR_RQM_HILEVEL 0x00060000 /* - high level */
-#define DMxCTR_RQF 0x01000000 /* DMA transfer request flag */
-#define DMxCTR_XEND 0x80000000 /* DMA transfer end flag */
-
-#define DMxSRC(N) __SYSREG(0xd2000004 + ((N) * 0x100), u32) /* control reg */
-
-#define DMxDST(N) __SYSREG(0xd2000008 + ((N) * 0x100), u32) /* src addr reg */
-
-#define DMxSIZ(N) __SYSREG(0xd200000c + ((N) * 0x100), u32) /* dest addr reg */
-#define DMxSIZ_CT 0x000fffff /* number of bytes to transfer */
-
-#define DMxCYC(N) __SYSREG(0xd2000010 + ((N) * 0x100), u32) /* intermittent
- * size reg */
-#define DMxCYC_CYC 0x000000ff /* number of interrmittent transfers -1 */
-
-#define DM0IRQ 16 /* DMA channel 0 complete IRQ */
-#define DM1IRQ 17 /* DMA channel 1 complete IRQ */
-#define DM2IRQ 18 /* DMA channel 2 complete IRQ */
-#define DM3IRQ 19 /* DMA channel 3 complete IRQ */
-
-#define DM0ICR GxICR(DM0IRQ) /* DMA channel 0 complete intr ctrl reg */
-#define DM1ICR GxICR(DM0IR1) /* DMA channel 1 complete intr ctrl reg */
-#define DM2ICR GxICR(DM0IR2) /* DMA channel 2 complete intr ctrl reg */
-#define DM3ICR GxICR(DM0IR3) /* DMA channel 3 complete intr ctrl reg */
-
-#ifndef __ASSEMBLY__
-
-struct mn10300_dmactl_regs {
- u32 ctr;
- const void *src;
- void *dst;
- u32 siz;
- u32 cyc;
-} __attribute__((aligned(0x100)));
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_DMACTL_REGS_H */
+++ /dev/null
-/* MN10300 ELF constant and register definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_ELF_H
-#define _ASM_ELF_H
-
-#include <linux/utsname.h>
-#include <asm/ptrace.h>
-#include <asm/user.h>
-
-/*
- * AM33 relocations
- */
-#define R_MN10300_NONE 0 /* No reloc. */
-#define R_MN10300_32 1 /* Direct 32 bit. */
-#define R_MN10300_16 2 /* Direct 16 bit. */
-#define R_MN10300_8 3 /* Direct 8 bit. */
-#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */
-#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */
-#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */
-#define R_MN10300_24 9 /* Direct 24 bit. */
-#define R_MN10300_RELATIVE 23 /* Adjust by program base. */
-
-/*
- * ELF register definitions..
- */
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-#define ELF_NFPREG 32
-typedef float elf_fpreg_t;
-
-typedef struct {
- elf_fpreg_t fpregs[ELF_NFPREG];
- u_int32_t fpcr;
-} elf_fpregset_t;
-
-extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
-
-/*
- * This is used to ensure we don't load something for the wrong architecture
- */
-#define elf_check_arch(x) \
- (((x)->e_machine == EM_CYGNUS_MN10300) || \
- ((x)->e_machine == EM_MN10300))
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB
-#define ELF_ARCH EM_MN10300
-
-/*
- * ELF process initialiser
- */
-#define ELF_PLAT_INIT(_r, load_addr) \
-do { \
- struct pt_regs *_ur = current->thread.uregs; \
- _ur->a3 = 0; _ur->a2 = 0; _ur->d3 = 0; _ur->d2 = 0; \
- _ur->mcvf = 0; _ur->mcrl = 0; _ur->mcrh = 0; _ur->mdrq = 0; \
- _ur->e1 = 0; _ur->e0 = 0; _ur->e7 = 0; _ur->e6 = 0; \
- _ur->e5 = 0; _ur->e4 = 0; _ur->e3 = 0; _ur->e2 = 0; \
- _ur->lar = 0; _ur->lir = 0; _ur->mdr = 0; \
- _ur->a1 = 0; _ur->a0 = 0; _ur->d1 = 0; _ur->d0 = 0; \
-} while (0)
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-/*
- * This is the location that an ET_DYN program is loaded if exec'ed. Typical
- * use of this is to invoke "./ld.so someprog" to test out a new version of
- * the loader. We need to make sure that it is out of the way of the program
- * that it will "exec", and that there is sufficient room for the brk.
- * - must clear the VMALLOC area
- */
-#define ELF_ET_DYN_BASE 0x04000000
-
-/*
- * regs is struct pt_regs, pr_reg is elf_gregset_t (which is
- * now struct user_regs, they are different)
- * - ELF_CORE_COPY_REGS has been guessed, and may be wrong
- */
-#define ELF_CORE_COPY_REGS(pr_reg, regs) \
-do { \
- pr_reg[0] = regs->a3; \
- pr_reg[1] = regs->a2; \
- pr_reg[2] = regs->d3; \
- pr_reg[3] = regs->d2; \
- pr_reg[4] = regs->mcvf; \
- pr_reg[5] = regs->mcrl; \
- pr_reg[6] = regs->mcrh; \
- pr_reg[7] = regs->mdrq; \
- pr_reg[8] = regs->e1; \
- pr_reg[9] = regs->e0; \
- pr_reg[10] = regs->e7; \
- pr_reg[11] = regs->e6; \
- pr_reg[12] = regs->e5; \
- pr_reg[13] = regs->e4; \
- pr_reg[14] = regs->e3; \
- pr_reg[15] = regs->e2; \
- pr_reg[16] = regs->sp; \
- pr_reg[17] = regs->lar; \
- pr_reg[18] = regs->lir; \
- pr_reg[19] = regs->mdr; \
- pr_reg[20] = regs->a1; \
- pr_reg[21] = regs->a0; \
- pr_reg[22] = regs->d1; \
- pr_reg[23] = regs->d0; \
- pr_reg[24] = regs->orig_d0; \
- pr_reg[25] = regs->epsw; \
- pr_reg[26] = regs->pc; \
-} while (0);
-
-/*
- * This yields a mask that user programs can use to figure out what
- * instruction set this CPU supports. This could be done in user space,
- * but it's not easy, and we've already done it here.
- */
-#define ELF_HWCAP (0)
-
-/*
- * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization. This is more specific in
- * intent than poking at uname or /proc/cpuinfo.
- *
- * For the moment, we have only optimizations for the Intel generations,
- * but that could change...
- */
-#define ELF_PLATFORM (NULL)
-
-#ifdef __KERNEL__
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
-#endif
-
-#endif /* _ASM_ELF_H */
+++ /dev/null
-#include <asm-generic/emergency-restart.h>
+++ /dev/null
-#include <asm-generic/errno.h>
+++ /dev/null
-/* MN10300 Microcontroller core exceptions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_EXCEPTIONS_H
-#define _ASM_EXCEPTIONS_H
-
-#include <linux/linkage.h>
-
-/*
- * define the breakpoint instruction opcode to use
- * - note that the JTAG unit steals 0xFF, so we want to avoid that if we can
- * (can use 0xF7)
- */
-#define GDBSTUB_BKPT 0xFF
-
-#ifndef __ASSEMBLY__
-
-/*
- * enumeration of exception codes (as extracted from TBR MSW)
- */
-enum exception_code {
- EXCEP_RESET = 0x000000, /* reset */
-
- /* MMU exceptions */
- EXCEP_ITLBMISS = 0x000100, /* instruction TLB miss */
- EXCEP_DTLBMISS = 0x000108, /* data TLB miss */
- EXCEP_IAERROR = 0x000110, /* instruction address */
- EXCEP_DAERROR = 0x000118, /* data address */
-
- /* system exceptions */
- EXCEP_TRAP = 0x000128, /* program interrupt (PI instruction) */
- EXCEP_ISTEP = 0x000130, /* single step */
- EXCEP_IBREAK = 0x000150, /* instruction breakpoint */
- EXCEP_OBREAK = 0x000158, /* operand breakpoint */
- EXCEP_PRIVINS = 0x000160, /* privileged instruction execution */
- EXCEP_UNIMPINS = 0x000168, /* unimplemented instruction execution */
- EXCEP_UNIMPEXINS = 0x000170, /* unimplemented extended instruction execution */
- EXCEP_MEMERR = 0x000178, /* illegal memory access */
- EXCEP_MISALIGN = 0x000180, /* misalignment */
- EXCEP_BUSERROR = 0x000188, /* bus error */
- EXCEP_ILLINSACC = 0x000190, /* illegal instruction access */
- EXCEP_ILLDATACC = 0x000198, /* illegal data access */
- EXCEP_IOINSACC = 0x0001a0, /* I/O space instruction access */
- EXCEP_PRIVINSACC = 0x0001a8, /* privileged space instruction access */
- EXCEP_PRIVDATACC = 0x0001b0, /* privileged space data access */
- EXCEP_DATINSACC = 0x0001b8, /* data space instruction access */
- EXCEP_DOUBLE_FAULT = 0x000200, /* double fault */
-
- /* FPU exceptions */
- EXCEP_FPU_DISABLED = 0x0001c0, /* FPU disabled */
- EXCEP_FPU_UNIMPINS = 0x0001c8, /* FPU unimplemented operation */
- EXCEP_FPU_OPERATION = 0x0001d0, /* FPU operation */
-
- /* interrupts */
- EXCEP_WDT = 0x000240, /* watchdog timer overflow */
- EXCEP_NMI = 0x000248, /* non-maskable interrupt */
- EXCEP_IRQ_LEVEL0 = 0x000280, /* level 0 maskable interrupt */
- EXCEP_IRQ_LEVEL1 = 0x000288, /* level 1 maskable interrupt */
- EXCEP_IRQ_LEVEL2 = 0x000290, /* level 2 maskable interrupt */
- EXCEP_IRQ_LEVEL3 = 0x000298, /* level 3 maskable interrupt */
- EXCEP_IRQ_LEVEL4 = 0x0002a0, /* level 4 maskable interrupt */
- EXCEP_IRQ_LEVEL5 = 0x0002a8, /* level 5 maskable interrupt */
- EXCEP_IRQ_LEVEL6 = 0x0002b0, /* level 6 maskable interrupt */
-
- /* system calls */
- EXCEP_SYSCALL0 = 0x000300, /* system call 0 */
- EXCEP_SYSCALL1 = 0x000308, /* system call 1 */
- EXCEP_SYSCALL2 = 0x000310, /* system call 2 */
- EXCEP_SYSCALL3 = 0x000318, /* system call 3 */
- EXCEP_SYSCALL4 = 0x000320, /* system call 4 */
- EXCEP_SYSCALL5 = 0x000328, /* system call 5 */
- EXCEP_SYSCALL6 = 0x000330, /* system call 6 */
- EXCEP_SYSCALL7 = 0x000338, /* system call 7 */
- EXCEP_SYSCALL8 = 0x000340, /* system call 8 */
- EXCEP_SYSCALL9 = 0x000348, /* system call 9 */
- EXCEP_SYSCALL10 = 0x000350, /* system call 10 */
- EXCEP_SYSCALL11 = 0x000358, /* system call 11 */
- EXCEP_SYSCALL12 = 0x000360, /* system call 12 */
- EXCEP_SYSCALL13 = 0x000368, /* system call 13 */
- EXCEP_SYSCALL14 = 0x000370, /* system call 14 */
- EXCEP_SYSCALL15 = 0x000378, /* system call 15 */
-};
-
-extern void __set_intr_stub(enum exception_code code, void *handler);
-extern void set_intr_stub(enum exception_code code, void *handler);
-extern void set_jtag_stub(enum exception_code code, void *handler);
-
-struct pt_regs;
-
-extern asmlinkage void __common_exception(void);
-extern asmlinkage void itlb_miss(void);
-extern asmlinkage void dtlb_miss(void);
-extern asmlinkage void itlb_aerror(void);
-extern asmlinkage void dtlb_aerror(void);
-extern asmlinkage void raw_bus_error(void);
-extern asmlinkage void double_fault(void);
-extern asmlinkage int system_call(struct pt_regs *);
-extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
-extern asmlinkage void nmi(struct pt_regs *, enum exception_code);
-extern asmlinkage void uninitialised_exception(struct pt_regs *,
- enum exception_code);
-extern asmlinkage void irq_handler(void);
-extern asmlinkage void profile_handler(void);
-extern asmlinkage void nmi_handler(void);
-extern asmlinkage void misalignment(struct pt_regs *, enum exception_code);
-
-extern void die(const char *, struct pt_regs *, enum exception_code)
- ATTRIB_NORET;
-
-extern int die_if_no_fixup(const char *, struct pt_regs *, enum exception_code);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_EXCEPTIONS_H */
+++ /dev/null
-/* MN10300 Frame buffer stuff
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_FB_H
-#define _ASM_FB_H
-
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H */
+++ /dev/null
-#include <asm-generic/fcntl.h>
+++ /dev/null
-/* MN10300 FPU definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * Derived from include/asm-i386/i387.h: Copyright (C) 1994 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_FPU_H
-#define _ASM_FPU_H
-
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-
-#ifdef __KERNEL__
-
-/* the task that owns the FPU state */
-extern struct task_struct *fpu_state_owner;
-
-#define set_using_fpu(tsk) \
-do { \
- (tsk)->thread.fpu_flags |= THREAD_USING_FPU; \
-} while (0)
-
-#define clear_using_fpu(tsk) \
-do { \
- (tsk)->thread.fpu_flags &= ~THREAD_USING_FPU; \
-} while (0)
-
-#define is_using_fpu(tsk) ((tsk)->thread.fpu_flags & THREAD_USING_FPU)
-
-#define unlazy_fpu(tsk) \
-do { \
- preempt_disable(); \
- if (fpu_state_owner == (tsk)) \
- fpu_save(&tsk->thread.fpu_state); \
- preempt_enable(); \
-} while (0)
-
-#define exit_fpu() \
-do { \
- struct task_struct *__tsk = current; \
- preempt_disable(); \
- if (fpu_state_owner == __tsk) \
- fpu_state_owner = NULL; \
- preempt_enable(); \
-} while (0)
-
-#define flush_fpu() \
-do { \
- struct task_struct *__tsk = current; \
- preempt_disable(); \
- if (fpu_state_owner == __tsk) { \
- fpu_state_owner = NULL; \
- __tsk->thread.uregs->epsw &= ~EPSW_FE; \
- } \
- preempt_enable(); \
- clear_using_fpu(__tsk); \
-} while (0)
-
-extern asmlinkage void fpu_init_state(void);
-extern asmlinkage void fpu_kill_state(struct task_struct *);
-extern asmlinkage void fpu_disabled(struct pt_regs *, enum exception_code);
-extern asmlinkage void fpu_exception(struct pt_regs *, enum exception_code);
-
-#ifdef CONFIG_FPU
-extern asmlinkage void fpu_save(struct fpu_state_struct *);
-extern asmlinkage void fpu_restore(struct fpu_state_struct *);
-#else
-#define fpu_save(a)
-#define fpu_restore(a)
-#endif /* CONFIG_FPU */
-
-/*
- * signal frame handlers
- */
-extern int fpu_setup_sigcontext(struct fpucontext *buf);
-extern int fpu_restore_sigcontext(struct fpucontext *buf);
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_FPU_H */
+++ /dev/null
-/* MN10300 Microcontroller core system register definitions -*- asm -*-
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_FRAME_INC
-#define _ASM_FRAME_INC
-
-#ifndef __ASSEMBLY__
-#error not for use in C files
-#endif
-
-#ifndef __ASM_OFFSETS_H__
-#include <asm/asm-offsets.h>
-#endif
-
-#define pi break
-
-#define fp a3
-
-###############################################################################
-#
-# build a stack frame from the registers
-# - the caller has subtracted 4 from SP before coming here
-#
-###############################################################################
-.macro SAVE_ALL
- add -4,sp # next exception frame ptr save area
- movm [other],(sp)
- mov usp,a1
- mov a1,(sp) # USP in MOVM[other] dummy slot
- movm [d2,d3,a2,a3,exreg0,exreg1,exother],(sp)
- mov sp,fp # FRAME pointer in A3
- add -12,sp # allow for calls to be made
- mov (__frame),a1
- mov a1,(REG_NEXT,fp)
- mov fp,(__frame)
-
- and ~EPSW_FE,epsw # disable the FPU inside the kernel
-
- # we may be holding current in E2
-#ifdef CONFIG_MN10300_CURRENT_IN_E2
- mov (__current),e2
-#endif
-.endm
-
-###############################################################################
-#
-# restore the registers from a stack frame
-#
-###############################################################################
-.macro RESTORE_ALL
- # peel back the stack to the calling frame
- # - this permits execve() to discard extra frames due to kernel syscalls
- mov (__frame),fp
- mov fp,sp
- mov (REG_NEXT,fp),d0 # userspace has regs->next == 0
- mov d0,(__frame)
-
-#ifndef CONFIG_MN10300_USING_JTAG
- mov (REG_EPSW,fp),d0
- btst EPSW_T,d0
- beq 99f
-
- or EPSW_NMID,epsw
- movhu (DCR),d1
- or 0x0001, d1
- movhu d1,(DCR)
-
-99:
-#endif
- movm (sp),[d2,d3,a2,a3,exreg0,exreg1,exother]
-
- # must restore usp even if returning to kernel space,
- # when CONFIG_PREEMPT is enabled.
- mov (sp),a1 # USP in MOVM[other] dummy slot
- mov a1,usp
-
- movm (sp),[other]
- add 8,sp
- rti
-
-.endm
-
-
-#endif /* _ASM_FRAME_INC */
+++ /dev/null
-/* empty */
+++ /dev/null
-#include <asm-generic/futex.h>
+++ /dev/null
-/* MN10300 Kernel GDB stub definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-#include <asm/exceptions.h>
-
-/*
- * register ID numbers in GDB remote protocol
- */
-
-#define GDB_REGID_PC 9
-#define GDB_REGID_FP 7
-#define GDB_REGID_SP 8
-
-/*
- * virtual stack layout for the GDB exception handler
- */
-#define NUMREGS 64
-
-#define GDB_FR_D0 (0 * 4)
-#define GDB_FR_D1 (1 * 4)
-#define GDB_FR_D2 (2 * 4)
-#define GDB_FR_D3 (3 * 4)
-#define GDB_FR_A0 (4 * 4)
-#define GDB_FR_A1 (5 * 4)
-#define GDB_FR_A2 (6 * 4)
-#define GDB_FR_A3 (7 * 4)
-
-#define GDB_FR_SP (8 * 4)
-#define GDB_FR_PC (9 * 4)
-#define GDB_FR_MDR (10 * 4)
-#define GDB_FR_EPSW (11 * 4)
-#define GDB_FR_LIR (12 * 4)
-#define GDB_FR_LAR (13 * 4)
-#define GDB_FR_MDRQ (14 * 4)
-
-#define GDB_FR_E0 (15 * 4)
-#define GDB_FR_E1 (16 * 4)
-#define GDB_FR_E2 (17 * 4)
-#define GDB_FR_E3 (18 * 4)
-#define GDB_FR_E4 (19 * 4)
-#define GDB_FR_E5 (20 * 4)
-#define GDB_FR_E6 (21 * 4)
-#define GDB_FR_E7 (22 * 4)
-
-#define GDB_FR_SSP (23 * 4)
-#define GDB_FR_MSP (24 * 4)
-#define GDB_FR_USP (25 * 4)
-#define GDB_FR_MCRH (26 * 4)
-#define GDB_FR_MCRL (27 * 4)
-#define GDB_FR_MCVF (28 * 4)
-
-#define GDB_FR_FPCR (29 * 4)
-#define GDB_FR_DUMMY0 (30 * 4)
-#define GDB_FR_DUMMY1 (31 * 4)
-
-#define GDB_FR_FS0 (32 * 4)
-
-#define GDB_FR_SIZE (NUMREGS * 4)
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
- /* saved main processor registers */
- u32 d0, d1, d2, d3, a0, a1, a2, a3;
- u32 sp, pc, mdr, epsw, lir, lar, mdrq;
- u32 e0, e1, e2, e3, e4, e5, e6, e7;
- u32 ssp, msp, usp, mcrh, mcrl, mcvf;
-
- /* saved floating point registers */
- u32 fpcr, _dummy0, _dummy1;
- u32 fs0, fs1, fs2, fs3, fs4, fs5, fs6, fs7;
- u32 fs8, fs9, fs10, fs11, fs12, fs13, fs14, fs15;
- u32 fs16, fs17, fs18, fs19, fs20, fs21, fs22, fs23;
- u32 fs24, fs25, fs26, fs27, fs28, fs29, fs30, fs31;
-};
-
-/*
- * Prototypes
- */
-extern void show_registers_only(struct pt_regs *regs);
-
-extern asmlinkage void gdbstub_init(void);
-extern asmlinkage void gdbstub_exit(int status);
-extern asmlinkage void gdbstub_io_init(void);
-extern asmlinkage void gdbstub_io_set_baud(unsigned baud);
-extern asmlinkage int gdbstub_io_rx_char(unsigned char *_ch, int nonblock);
-extern asmlinkage void gdbstub_io_tx_char(unsigned char ch);
-extern asmlinkage void gdbstub_io_tx_flush(void);
-
-extern asmlinkage void gdbstub_io_rx_handler(void);
-extern asmlinkage void gdbstub_rx_irq(struct pt_regs *, enum exception_code);
-extern asmlinkage int gdbstub_intercept(struct pt_regs *, enum exception_code);
-extern asmlinkage void gdbstub_exception(struct pt_regs *, enum exception_code);
-extern asmlinkage void __gdbstub_bug_trap(void);
-extern asmlinkage void __gdbstub_pause(void);
-extern asmlinkage void start_kernel(void);
-
-#ifndef CONFIG_MN10300_CACHE_DISABLED
-extern asmlinkage void gdbstub_purge_cache(void);
-#else
-#define gdbstub_purge_cache() do {} while (0)
-#endif
-
-/* Used to prevent crashes in memory access */
-extern asmlinkage int gdbstub_read_byte(const u8 *, u8 *);
-extern asmlinkage int gdbstub_read_word(const u8 *, u8 *);
-extern asmlinkage int gdbstub_read_dword(const u8 *, u8 *);
-extern asmlinkage int gdbstub_write_byte(u32, u8 *);
-extern asmlinkage int gdbstub_write_word(u32, u8 *);
-extern asmlinkage int gdbstub_write_dword(u32, u8 *);
-
-extern asmlinkage void gdbstub_read_byte_guard(void);
-extern asmlinkage void gdbstub_read_byte_cont(void);
-extern asmlinkage void gdbstub_read_word_guard(void);
-extern asmlinkage void gdbstub_read_word_cont(void);
-extern asmlinkage void gdbstub_read_dword_guard(void);
-extern asmlinkage void gdbstub_read_dword_cont(void);
-extern asmlinkage void gdbstub_write_byte_guard(void);
-extern asmlinkage void gdbstub_write_byte_cont(void);
-extern asmlinkage void gdbstub_write_word_guard(void);
-extern asmlinkage void gdbstub_write_word_cont(void);
-extern asmlinkage void gdbstub_write_dword_guard(void);
-extern asmlinkage void gdbstub_write_dword_cont(void);
-
-extern u8 gdbstub_rx_buffer[PAGE_SIZE];
-extern u32 gdbstub_rx_inp;
-extern u32 gdbstub_rx_outp;
-extern u8 gdbstub_rx_overflow;
-extern u8 gdbstub_busy;
-extern u8 gdbstub_rx_unget;
-
-#ifdef CONFIG_GDBSTUB_DEBUGGING
-extern void gdbstub_printk(const char *fmt, ...)
- __attribute__((format(printf, 1, 2)));
-#else
-static inline __attribute__((format(printf, 1, 2)))
-void gdbstub_printk(const char *fmt, ...)
-{
-}
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_ENTRY
-#define gdbstub_entry(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_entry(FMT, ...) ({ 0; })
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_PROTOCOL
-#define gdbstub_proto(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_proto(FMT, ...) ({ 0; })
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_IO
-#define gdbstub_io(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_io(FMT, ...) ({ 0; })
-#endif
-
-#ifdef CONFIG_GDBSTUB_DEBUG_BREAKPOINT
-#define gdbstub_bkpt(FMT, ...) gdbstub_printk(FMT, ##__VA_ARGS__)
-#else
-#define gdbstub_bkpt(FMT, ...) ({ 0; })
-#endif
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */
+++ /dev/null
-/* MN10300 Hardware IRQ statistics and management
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_HARDIRQ_H
-#define _ASM_HARDIRQ_H
-
-#include <linux/threads.h>
-#include <linux/irq.h>
-#include <asm/exceptions.h>
-
-/* assembly code in softirq.h is sensitive to the offsets of these fields */
-typedef struct {
- unsigned int __softirq_pending;
- unsigned long idle_timestamp;
- unsigned int __nmi_count; /* arch dependent */
- unsigned int __irq_count; /* arch dependent */
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-extern void ack_bad_irq(int irq);
-
-/*
- * manipulate stubs in the MN10300 CPU Trap/Interrupt Vector table
- * - these should jump to __common_exception in entry.S unless there's a good
- * reason to do otherwise (see trap_preinit() in traps.c)
- */
-typedef void (*intr_stub_fnx)(struct pt_regs *regs,
- enum exception_code intcode);
-
-/*
- * manipulate pointers in the Exception table (see entry.S)
- * - these are indexed by decoding the lower 24 bits of the TBR register
- * - note that the MN103E010 doesn't always trap through the correct vector,
- * but does always set the TBR correctly
- */
-extern asmlinkage void set_excp_vector(enum exception_code code,
- intr_stub_fnx handler);
-
-#endif /* _ASM_HARDIRQ_H */
+++ /dev/null
-/* MN10300 Virtual kernel memory mappings for high memory
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-i386/highmem.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#ifdef __KERNEL__
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <asm/kmap_types.h>
-#include <asm/pgtable.h>
-
-/* undef for production */
-#undef HIGHMEM_DEBUG
-
-/* declarations for highmem.c */
-extern unsigned long highstart_pfn, highend_pfn;
-
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
-extern pte_t *pkmap_page_table;
-
-extern void __init kmap_init(void);
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-#define PKMAP_BASE 0xfe000000UL
-#define LAST_PKMAP 1024
-#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
-#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-extern unsigned long kmap_high(struct page *page);
-extern void kunmap_high(struct page *page);
-
-static inline unsigned long kmap(struct page *page)
-{
- if (in_interrupt())
- BUG();
- if (page < highmem_start_page)
- return page_address(page);
- return kmap_high(page);
-}
-
-static inline void kunmap(struct page *page)
-{
- if (in_interrupt())
- BUG();
- if (page < highmem_start_page)
- return;
- kunmap_high(page);
-}
-
-/*
- * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
- * gives a more generic (and caching) interface. But kmap_atomic can
- * be used in IRQ contexts, so in some (very limited) cases we need
- * it.
- */
-static inline unsigned long kmap_atomic(struct page *page, enum km_type type)
-{
- enum fixed_addresses idx;
- unsigned long vaddr;
-
- if (page < highmem_start_page)
- return page_address(page);
-
- debug_kmap_atomic(type);
- idx = type + KM_TYPE_NR * smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-#if HIGHMEM_DEBUG
- if (!pte_none(*(kmap_pte - idx)))
- BUG();
-#endif
- set_pte(kmap_pte - idx, mk_pte(page, kmap_prot));
- __flush_tlb_one(vaddr);
-
- return vaddr;
-}
-
-static inline void kunmap_atomic(unsigned long vaddr, enum km_type type)
-{
-#if HIGHMEM_DEBUG
- enum fixed_addresses idx = type + KM_TYPE_NR * smp_processor_id();
-
- if (vaddr < FIXADDR_START) /* FIXME */
- return;
-
- if (vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx))
- BUG();
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(kmap_pte - idx);
- __flush_tlb_one(vaddr);
-#endif
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_HIGHMEM_H */
+++ /dev/null
-/* MN10300 Hardware interrupt definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_HW_IRQ_H
-#define _ASM_HW_IRQ_H
-
-#endif /* _ASM_HW_IRQ_H */
+++ /dev/null
-/* MN10300 On-board interrupt controller registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_INTCTL_REGS_H
-#define _ASM_INTCTL_REGS_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-
-/* interrupt controller registers */
-#define GxICR(X) __SYSREG(0xd4000000 + (X) * 4, u16) /* group irq ctrl regs */
-
-#define IAGR __SYSREG(0xd4000100, u16) /* intr acceptance group reg */
-#define IAGR_GN 0x00fc /* group number register
- * (documentation _has_ to be wrong)
- */
-
-#define EXTMD __SYSREG(0xd4000200, u16) /* external pin intr spec reg */
-#define GET_XIRQ_TRIGGER(X) ((EXTMD >> ((X) * 2)) & 3)
-
-#define SET_XIRQ_TRIGGER(X,Y) \
-do { \
- u16 x = EXTMD; \
- x &= ~(3 << ((X) * 2)); \
- x |= ((Y) & 3) << ((X) * 2); \
- EXTMD = x; \
-} while (0)
-
-#define XIRQ_TRIGGER_LOWLEVEL 0
-#define XIRQ_TRIGGER_HILEVEL 1
-#define XIRQ_TRIGGER_NEGEDGE 2
-#define XIRQ_TRIGGER_POSEDGE 3
-
-/* non-maskable interrupt control */
-#define NMIIRQ 0
-#define NMICR GxICR(NMIIRQ) /* NMI control register */
-#define NMICR_NMIF 0x0001 /* NMI pin interrupt flag */
-#define NMICR_WDIF 0x0002 /* watchdog timer overflow flag */
-#define NMICR_ABUSERR 0x0008 /* async bus error flag */
-
-/* maskable interrupt control */
-#define GxICR_DETECT 0x0001 /* interrupt detect flag */
-#define GxICR_REQUEST 0x0010 /* interrupt request flag */
-#define GxICR_ENABLE 0x0100 /* interrupt enable flag */
-#define GxICR_LEVEL 0x7000 /* interrupt priority level */
-#define GxICR_LEVEL_0 0x0000 /* - level 0 */
-#define GxICR_LEVEL_1 0x1000 /* - level 1 */
-#define GxICR_LEVEL_2 0x2000 /* - level 2 */
-#define GxICR_LEVEL_3 0x3000 /* - level 3 */
-#define GxICR_LEVEL_4 0x4000 /* - level 4 */
-#define GxICR_LEVEL_5 0x5000 /* - level 5 */
-#define GxICR_LEVEL_6 0x6000 /* - level 6 */
-#define GxICR_LEVEL_SHIFT 12
-
-#ifndef __ASSEMBLY__
-extern void set_intr_level(int irq, u16 level);
-extern void set_intr_postackable(int irq);
-#endif
-
-/* external interrupts */
-#define XIRQxICR(X) GxICR((X)) /* external interrupt control regs */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_INTCTL_REGS_H */
+++ /dev/null
-/* MN10300 I/O port emulation and memory-mapped I/O
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
-
-#include <asm/page.h> /* I/O is all done through memory accesses */
-#include <asm/cpu-regs.h>
-#include <asm/cacheflush.h>
-
-#define mmiowb() do {} while (0)
-
-/*****************************************************************************/
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
- */
-static inline u8 readb(const volatile void __iomem *addr)
-{
- return *(const volatile u8 *) addr;
-}
-
-static inline u16 readw(const volatile void __iomem *addr)
-{
- return *(const volatile u16 *) addr;
-}
-
-static inline u32 readl(const volatile void __iomem *addr)
-{
- return *(const volatile u32 *) addr;
-}
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-static inline void writeb(u8 b, volatile void __iomem *addr)
-{
- *(volatile u8 *) addr = b;
-}
-
-static inline void writew(u16 b, volatile void __iomem *addr)
-{
- *(volatile u16 *) addr = b;
-}
-
-static inline void writel(u32 b, volatile void __iomem *addr)
-{
- *(volatile u32 *) addr = b;
-}
-
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-/*****************************************************************************/
-/*
- * traditional input/output functions
- */
-static inline u8 inb_local(unsigned long addr)
-{
- return readb((volatile void __iomem *) addr);
-}
-
-static inline void outb_local(u8 b, unsigned long addr)
-{
- return writeb(b, (volatile void __iomem *) addr);
-}
-
-static inline u8 inb(unsigned long addr)
-{
- return readb((volatile void __iomem *) addr);
-}
-
-static inline u16 inw(unsigned long addr)
-{
- return readw((volatile void __iomem *) addr);
-}
-
-static inline u32 inl(unsigned long addr)
-{
- return readl((volatile void __iomem *) addr);
-}
-
-static inline void outb(u8 b, unsigned long addr)
-{
- return writeb(b, (volatile void __iomem *) addr);
-}
-
-static inline void outw(u16 b, unsigned long addr)
-{
- return writew(b, (volatile void __iomem *) addr);
-}
-
-static inline void outl(u32 b, unsigned long addr)
-{
- return writel(b, (volatile void __iomem *) addr);
-}
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x, addr) outb((x), (addr))
-#define outw_p(x, addr) outw((x), (addr))
-#define outl_p(x, addr) outl((x), (addr))
-
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u8 *buf = buffer;
- do {
- u8 x = inb(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u16 *buf = buffer;
- do {
- u16 x = inw(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
- if (count) {
- u32 *buf = buffer;
- do {
- u32 x = inl(addr);
- *buf++ = x;
- } while (--count);
- }
-}
-
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u8 *buf = buffer;
- do {
- outb(*buf++, addr);
- } while (--count);
- }
-}
-
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
- if (count) {
- const u16 *buf = buffer;
- do {
- outw(*buf++, addr);
- } while (--count);
- }
-}
-
-extern void __outsl(unsigned long addr, const void *buffer, int count);
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
- if ((unsigned long) buffer & 0x3)
- return __outsl(addr, buffer, count);
-
- if (count) {
- const u32 *buf = buffer;
- do {
- outl(*buf++, addr);
- } while (--count);
- }
-}
-
-#define ioread8(addr) readb(addr)
-#define ioread16(addr) readw(addr)
-#define ioread32(addr) readl(addr)
-
-#define iowrite8(v, addr) writeb((v), (addr))
-#define iowrite16(v, addr) writew((v), (addr))
-#define iowrite32(v, addr) writel((v), (addr))
-
-#define ioread8_rep(p, dst, count) \
- insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
- insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
- insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
- outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
- outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
- outsl((unsigned long) (p), (src), (count))
-
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-#ifdef __KERNEL__
-
-#include <linux/vmalloc.h>
-#define __io_virt(x) ((void *) (x))
-
-/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
-{
-}
-
-/*
- * Change virtual addresses to physical addresses and vv.
- * These are pretty trivial
- */
-static inline unsigned long virt_to_phys(volatile void *address)
-{
- return __pa(address);
-}
-
-static inline void *phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-
-/*
- * Change "struct page" to physical address.
- */
-static inline void *__ioremap(unsigned long offset, unsigned long size,
- unsigned long flags)
-{
- return (void *) offset;
-}
-
-static inline void *ioremap(unsigned long offset, unsigned long size)
-{
- return (void *) offset;
-}
-
-/*
- * This one maps high address device memory and turns off caching for that
- * area. it's useful if some control registers are in such an area and write
- * combining or read caching is not desirable:
- */
-static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
-{
- return (void *) (offset | 0x20000000);
-}
-
-#define ioremap_wc ioremap_nocache
-
-static inline void iounmap(void *addr)
-{
-}
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
- return (void __iomem *) port;
-}
-
-static inline void ioport_unmap(void __iomem *p)
-{
-}
-
-#define xlate_dev_kmem_ptr(p) ((void *) (p))
-#define xlate_dev_mem_ptr(p) ((void *) (p))
-
-/*
- * PCI bus iomem addresses must be in the region 0x80000000-0x9fffffff
- */
-static inline unsigned long virt_to_bus(volatile void *address)
-{
- return ((unsigned long) address) & ~0x20000000;
-}
-
-static inline void *bus_to_virt(unsigned long address)
-{
- return (void *) address;
-}
-
-#define page_to_bus page_to_phys
-
-#define memset_io(a, b, c) memset(__io_virt(a), (b), (c))
-#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c))
-#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c))
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IO_H */
+++ /dev/null
-#include <asm-generic/ioctl.h>
+++ /dev/null
-#ifndef _ASM_IOCTLS_H
-#define _ASM_IOCTLS_H
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T', 0x2A, struct termios2)
-#define TCSETS2 _IOW('T', 0x2B, struct termios2)
-#define TCSETSW2 _IOW('T', 0x2C, struct termios2)
-#define TCSETSF2 _IOW('T', 0x2D, struct termios2)
-#define TIOCGPTN _IOR('T', 0x30, unsigned int) /* Get Pty Number
- * (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T', 0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define TIOCGHAYESESP 0x545E /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP 0x545F /* Set Hayes ESP configuration */
-#define FIOQSIZE 0x5460
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* _ASM_IOCTLS_H */
+++ /dev/null
-#include <asm-generic/ipc.h>
+++ /dev/null
-#ifndef _ASM_IPCBUF_H
-#define _ASM_IPCBUF_H
-
-/*
- * The ipc64_perm structure for MN10300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* _ASM_IPCBUF_H */
+++ /dev/null
-/* MN10300 Hardware interrupt definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-i386/irq.h:
- * - (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_IRQ_H
-#define _ASM_IRQ_H
-
-#include <asm/intctl-regs.h>
-#include <asm/reset-regs.h>
-#include <asm/proc/irq.h>
-
-/* this number is used when no interrupt has been assigned */
-#define NO_IRQ INT_MAX
-
-/* hardware irq numbers */
-#define NR_IRQS GxICR_NUM_IRQS
-
-/* external hardware irq numbers */
-#define NR_XIRQS GxICR_NUM_XIRQS
-
-#define irq_canonicalize(IRQ) (IRQ)
-
-#endif /* _ASM_IRQ_H */
+++ /dev/null
-/* MN10300 IRQ registers pointer definition
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_IRQ_REGS_H
-#define _ASM_IRQ_REGS_H
-
-/*
- * Per-cpu current frame pointer - the location of the last exception frame on
- * the stack
- */
-#define ARCH_HAS_OWN_IRQ_REGS
-
-#ifndef __ASSEMBLY__
-#define get_irq_regs() (__frame)
-#endif
-
-#endif /* _ASM_IRQ_REGS_H */
+++ /dev/null
-/* MN10300 In-kernel death knells
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_KDEBUG_H
-#define _ASM_KDEBUG_H
-
-/* Grossly misnamed. */
-enum die_val {
- DIE_OOPS = 1,
- DIE_BREAKPOINT,
- DIE_GPF,
-};
-
-#endif /* _ASM_KDEBUG_H */
+++ /dev/null
-/* MN10300 kmap_atomic() slot IDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_SOFTIRQ0,
- KM_SOFTIRQ1,
- KM_TYPE_NR
-};
-
-#endif /* _ASM_KMAP_TYPES_H */
+++ /dev/null
-/* MN10300 Kernel Probes support
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by Mark Salter (msalter@redhat.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public Licence as published by
- * the Free Software Foundation; either version 2 of the Licence, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public Licence for more details.
- *
- * You should have received a copy of the GNU General Public Licence
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-#ifndef _ASM_KPROBES_H
-#define _ASM_KPROBES_H
-
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-struct kprobe;
-
-typedef unsigned char kprobe_opcode_t;
-#define BREAKPOINT_INSTRUCTION 0xff
-#define MAX_INSN_SIZE 8
-#define MAX_STACK_SIZE 128
-
-/* Architecture specific copy of original instruction */
-struct arch_specific_insn {
- /* copy of original instruction
- */
- kprobe_opcode_t insn[MAX_INSN_SIZE];
-};
-
-extern const int kretprobe_blacklist_size;
-
-extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-
-#define flush_insn_slot(p) do {} while (0)
-
-extern void arch_remove_kprobe(struct kprobe *p);
-
-#endif /* _ASM_KPROBES_H */
+++ /dev/null
-/* MN10300 Linkage and calling-convention overrides
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_LINKAGE_H
-#define _ASM_LINKAGE_H
-
-/* don't override anything */
-#define asmlinkage
-
-#define __ALIGN .align 4,0xcb
-#define __ALIGN_STR ".align 4,0xcb"
-
-#endif
+++ /dev/null
-#include <asm-generic/local.h>
+++ /dev/null
-#include <asm/rtc-regs.h>
+++ /dev/null
-/* MN10300 Constants for mmap and co.
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * - Derived from asm-x86/mman.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_MMAN_H
-#define _ASM_MMAN_H
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
-#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* _ASM_MMAN_H */
+++ /dev/null
-/* MN10300 Memory management context
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-frv/mmu.h
- */
-
-#ifndef _ASM_MMU_H
-#define _ASM_MMU_H
-
-/*
- * MMU context
- */
-typedef struct {
- unsigned long tlbpid[NR_CPUS]; /* TLB PID for this process on
- * each CPU */
-} mm_context_t;
-
-#endif /* _ASM_MMU_H */
+++ /dev/null
-/* MN10300 MMU context management
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- * - Derived from include/asm-m32r/mmu_context.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- *
- * This implements an algorithm to provide TLB PID mappings to provide
- * selective access to the TLB for processes, thus reducing the number of TLB
- * flushes required.
- *
- * Note, however, that the M32R algorithm is technically broken as it does not
- * handle version wrap-around, and could, theoretically, have a problem with a
- * very long lived program that sleeps long enough for the version number to
- * wrap all the way around so that its TLB mappings appear valid once again.
- */
-#ifndef _ASM_MMU_CONTEXT_H
-#define _ASM_MMU_CONTEXT_H
-
-#include <asm/atomic.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <asm-generic/mm_hooks.h>
-
-#define MMU_CONTEXT_TLBPID_MASK 0x000000ffUL
-#define MMU_CONTEXT_VERSION_MASK 0xffffff00UL
-#define MMU_CONTEXT_FIRST_VERSION 0x00000100UL
-#define MMU_NO_CONTEXT 0x00000000UL
-
-extern unsigned long mmu_context_cache[NR_CPUS];
-#define mm_context(mm) (mm->context.tlbpid[smp_processor_id()])
-
-#define enter_lazy_tlb(mm, tsk) do {} while (0)
-
-#ifdef CONFIG_SMP
-#define cpu_ran_vm(cpu, task) \
- cpu_set((cpu), (task)->cpu_vm_mask)
-#define cpu_maybe_ran_vm(cpu, task) \
- cpu_test_and_set((cpu), (task)->cpu_vm_mask)
-#else
-#define cpu_ran_vm(cpu, task) do {} while (0)
-#define cpu_maybe_ran_vm(cpu, task) true
-#endif /* CONFIG_SMP */
-
-/*
- * allocate an MMU context
- */
-static inline unsigned long allocate_mmu_context(struct mm_struct *mm)
-{
- unsigned long *pmc = &mmu_context_cache[smp_processor_id()];
- unsigned long mc = ++(*pmc);
-
- if (!(mc & MMU_CONTEXT_TLBPID_MASK)) {
- /* we exhausted the TLB PIDs of this version on this CPU, so we
- * flush this CPU's TLB in its entirety and start new cycle */
- flush_tlb_all();
-
- /* fix the TLB version if needed (we avoid version #0 so as to
- * distingush MMU_NO_CONTEXT) */
- if (!mc)
- *pmc = mc = MMU_CONTEXT_FIRST_VERSION;
- }
- mm_context(mm) = mc;
- return mc;
-}
-
-/*
- * get an MMU context if one is needed
- */
-static inline unsigned long get_mmu_context(struct mm_struct *mm)
-{
- unsigned long mc = MMU_NO_CONTEXT, cache;
-
- if (mm) {
- cache = mmu_context_cache[smp_processor_id()];
- mc = mm_context(mm);
-
- /* if we have an old version of the context, replace it */
- if ((mc ^ cache) & MMU_CONTEXT_VERSION_MASK)
- mc = allocate_mmu_context(mm);
- }
- return mc;
-}
-
-/*
- * initialise the context related info for a new mm_struct instance
- */
-static inline int init_new_context(struct task_struct *tsk,
- struct mm_struct *mm)
-{
- int num_cpus = NR_CPUS, i;
-
- for (i = 0; i < num_cpus; i++)
- mm->context.tlbpid[i] = MMU_NO_CONTEXT;
- return 0;
-}
-
-/*
- * destroy context related info for an mm_struct that is about to be put to
- * rest
- */
-#define destroy_context(mm) do { } while (0)
-
-/*
- * after we have set current->mm to a new value, this activates the context for
- * the new mm so we see the new mappings.
- */
-static inline void activate_context(struct mm_struct *mm, int cpu)
-{
- PIDR = get_mmu_context(mm) & MMU_CONTEXT_TLBPID_MASK;
-}
-
-/*
- * change between virtual memory sets
- */
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
-{
- int cpu = smp_processor_id();
-
- if (prev != next) {
- cpu_ran_vm(cpu, next);
- activate_context(next, cpu);
- PTBR = (unsigned long) next->pgd;
- } else if (!cpu_maybe_ran_vm(cpu, next)) {
- activate_context(next, cpu);
- }
-}
-
-#define deactivate_mm(tsk, mm) do {} while (0)
-#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
-
-#endif /* _ASM_MMU_CONTEXT_H */
+++ /dev/null
-/* MN10300 Arch-specific module definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by Mark Salter (msalter@redhat.com)
- * Derived from include/asm-i386/module.h
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_MODULE_H
-#define _ASM_MODULE_H
-
-struct mod_arch_specific {
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-/*
- * Include the MN10300 architecture version.
- */
-#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
-
-#endif /* _ASM_MODULE_H */
+++ /dev/null
-#ifndef _ASM_MSGBUF_H
-#define _ASM_MSGBUF_H
-
-/*
- * The msqid64_ds structure for MN10300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* _ASM_MSGBUF_H */
+++ /dev/null
-/* MN10300 Mutex fastpath
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-#include <asm-generic/mutex-null.h>
+++ /dev/null
-/* MN10300 NMI handling
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_NMI_H
-#define _ASM_NMI_H
-
-#endif /* _ASM_NMI_H */
+++ /dev/null
-/* MN10300 Page table definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PAGE_H
-#define _ASM_PAGE_H
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-
-#ifndef __ASSEMBLY__
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE - 1))
-#else
-#define PAGE_SIZE +(1 << PAGE_SHIFT) /* unary plus marks an
- * immediate val not an addr */
-#define PAGE_MASK +(~(PAGE_SIZE - 1))
-#endif
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE)
-#define copy_page(to, from) memcpy((void *)(to), (void *)(from), PAGE_SIZE)
-
-#define clear_user_page(addr, vaddr, page) clear_page(addr)
-#define copy_user_page(vto, vfrom, vaddr, to) copy_page(vto, vfrom)
-
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define PTE_MASK PAGE_MASK
-#define HPAGE_SHIFT 22
-
-#ifdef CONFIG_HUGETLB_PAGE
-#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT)
-#define HPAGE_MASK (~(HPAGE_SIZE - 1))
-#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
-#endif
-
-#define pte_val(x) ((x).pte)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) })
-#define __pgd(x) ((pgd_t) { (x) })
-#define __pgprot(x) ((pgprot_t) { (x) })
-
-#include <asm-generic/pgtable-nopmd.h>
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * This handles the memory map.. We could make this a config
- * option, but too many people screw it up, and too few need
- * it.
- *
- * A __PAGE_OFFSET of 0xC0000000 means that the kernel has
- * a virtual address space of one gigabyte, which limits the
- * amount of physical memory you can use to about 950MB.
- */
-
-#ifndef __ASSEMBLY__
-
-/* Pure 2^n version of get_order */
-static inline int get_order(unsigned long size) __attribute__((const));
-static inline int get_order(unsigned long size)
-{
- int order;
-
- size = (size - 1) >> (PAGE_SHIFT - 1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
-
-#endif /* __ASSEMBLY__ */
-
-#include <asm/page_offset.h>
-
-#define __PAGE_OFFSET (PAGE_OFFSET_RAW)
-#define PAGE_OFFSET ((unsigned long) __PAGE_OFFSET)
-
-/*
- * main RAM and kernel working space are coincident at 0x90000000, but to make
- * life more interesting, there's also an uncached virtual shadow at 0xb0000000
- * - these mappings are fixed in the MMU
- */
-#define __pfn_disp (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT)
-
-#define __pa(x) ((unsigned long)(x))
-#define __va(x) ((void *)(unsigned long)(x))
-#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#define pfn_to_page(pfn) (mem_map + ((pfn) - __pfn_disp))
-#define page_to_pfn(page) ((unsigned long)((page) - mem_map) + __pfn_disp)
-
-#define pfn_valid(pfn) \
-({ \
- unsigned long __pfn = (pfn) - __pfn_disp; \
- __pfn < max_mapnr; \
-})
-
-#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
-#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-
-#define VM_DATA_DEFAULT_FLAGS \
- (VM_READ | VM_WRITE | \
- ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
- VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_PAGE_H */
+++ /dev/null
-/* MN10300 Kernel base address
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- */
-#ifndef _ASM_PAGE_OFFSET_H
-#define _ASM_PAGE_OFFSET_H
-
-#define PAGE_OFFSET_RAW CONFIG_KERNEL_RAM_BASE_ADDRESS
-
-#endif
+++ /dev/null
-/* MN10300 Kernel parameters
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PARAM_H
-#define _ASM_PARAM_H
-
-#ifdef __KERNEL__
-#define HZ CONFIG_HZ /* Internal kernel timer frequency */
-#define USER_HZ 100 /* .. some user interfaces are in
- * "ticks" */
-#define CLOCKS_PER_SEC (USER_HZ) /* like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-#define COMMAND_LINE_SIZE 256
-
-#endif /* _ASM_PARAM_H */
+++ /dev/null
-/* MN10300 PCI definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PCI_H
-#define _ASM_PCI_H
-
-#ifdef __KERNEL__
-#include <linux/mm.h> /* for struct page */
-
-#if 0
-#define __pcbdebug(FMT, ADDR, ...) \
- printk(KERN_DEBUG "PCIBRIDGE[%08x]: "FMT"\n", \
- (u32)(ADDR), ##__VA_ARGS__)
-
-#define __pcidebug(FMT, BUS, DEVFN, WHERE,...) \
-do { \
- printk(KERN_DEBUG "PCI[%02x:%02x.%x + %02x]: "FMT"\n", \
- (BUS)->number, \
- PCI_SLOT(DEVFN), \
- PCI_FUNC(DEVFN), \
- (u32)(WHERE), ##__VA_ARGS__); \
-} while (0)
-
-#else
-#define __pcbdebug(FMT, ADDR, ...) do {} while (0)
-#define __pcidebug(FMT, BUS, DEVFN, WHERE, ...) do {} while (0)
-#endif
-
-/* Can be used to override the logic in pci_scan_bus for skipping
- * already-configured bus numbers - to be used for buggy BIOSes or
- * architectures with incomplete PCI setup by the loader */
-
-#ifdef CONFIG_PCI
-#define pcibios_assign_all_busses() 1
-extern void unit_pci_init(void);
-#else
-#define pcibios_assign_all_busses() 0
-#endif
-
-extern unsigned long pci_mem_start;
-#define PCIBIOS_MIN_IO 0xBE000004
-#define PCIBIOS_MIN_MEM 0xB8000000
-
-void pcibios_set_master(struct pci_dev *dev);
-void pcibios_penalize_isa_irq(int irq);
-
-/* Dynamic DMA mapping stuff.
- * i386 has everything mapped statically.
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <asm/scatterlist.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-
-struct pci_dev;
-
-/* The PCI address space does equal the physical memory
- * address space. The networking and block device layers use
- * this boolean for bounce buffer decisions.
- */
-#define PCI_DMA_BUS_IS_PHYS (1)
-
-
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
-/* Return the index of the PCI controller for device. */
-static inline int pci_controller_num(struct pci_dev *dev)
-{
- return 0;
-}
-
-#define HAVE_PCI_MMAP
-extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state,
- int write_combine);
-
-#endif /* __KERNEL__ */
-
-/* implement the pci_ DMA API in terms of the generic device dma_ one */
-#include <asm-generic/pci-dma-compat.h>
-
-/**
- * pcibios_resource_to_bus - convert resource to PCI bus address
- * @dev: device which owns this resource
- * @region: converted bus-centric region (start,end)
- * @res: resource to convert
- *
- * Convert a resource to a PCI device bus address or bus window.
- */
-extern void pcibios_resource_to_bus(struct pci_dev *dev,
- struct pci_bus_region *region,
- struct resource *res);
-
-extern void pcibios_bus_to_resource(struct pci_dev *dev,
- struct resource *res,
- struct pci_bus_region *region);
-
-static inline struct resource *
-pcibios_select_root(struct pci_dev *pdev, struct resource *res)
-{
- struct resource *root = NULL;
-
- if (res->flags & IORESOURCE_IO)
- root = &ioport_resource;
- if (res->flags & IORESOURCE_MEM)
- root = &iomem_resource;
-
- return root;
-}
-
-#define pcibios_scan_all_fns(a, b) 0
-
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
-{
- return channel ? 15 : 14;
-}
-
-#endif /* _ASM_PCI_H */
+++ /dev/null
-#include <asm-generic/percpu.h>
+++ /dev/null
-/* MN10300 Page and page table/directory allocation
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PGALLOC_H
-#define _ASM_PGALLOC_H
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <linux/threads.h>
-#include <linux/mm.h> /* for struct page */
-
-struct mm_struct;
-struct page;
-
-/* attach a page table to a PMD entry */
-#define pmd_populate_kernel(mm, pmd, pte) \
- set_pmd(pmd, __pmd(__pa(pte) | _PAGE_TABLE))
-
-static inline
-void pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *pte)
-{
- set_pmd(pmd, __pmd((page_to_pfn(pte) << PAGE_SHIFT) | _PAGE_TABLE));
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-/*
- * Allocate and free page tables.
- */
-
-extern pgd_t *pgd_alloc(struct mm_struct *);
-extern void pgd_free(struct mm_struct *, pgd_t *);
-
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long);
-extern struct page *pte_alloc_one(struct mm_struct *, unsigned long);
-
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
- free_page((unsigned long) pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, struct page *pte)
-{
- __free_page(pte);
-}
-
-
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
-
-#endif /* _ASM_PGALLOC_H */
+++ /dev/null
-/* MN10300 Page table manipulators and constants
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- *
- *
- * The Linux memory management assumes a three-level page table setup. On
- * the i386, we use that, but "fold" the mid level into the top-level page
- * table, so that we physically have the same two-level page table as the
- * i386 mmu expects.
- *
- * This file contains the functions and defines necessary to modify and use
- * the i386 page table tree for the purposes of the MN10300 TLB handler
- * functions.
- */
-#ifndef _ASM_PGTABLE_H
-#define _ASM_PGTABLE_H
-
-#include <asm/cpu-regs.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <linux/threads.h>
-
-#include <asm/bitops.h>
-
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
-extern unsigned long empty_zero_page[1024];
-extern spinlock_t pgd_lock;
-extern struct page *pgd_list;
-
-extern void pmd_ctor(void *, struct kmem_cache *, unsigned long);
-extern void pgtable_cache_init(void);
-extern void paging_init(void);
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * The Linux mn10300 paging architecture only implements both the traditional
- * 2-level page tables
- */
-#define PGDIR_SHIFT 22
-#define PTRS_PER_PGD 1024
-#define PTRS_PER_PUD 1 /* we don't really have any PUD physically */
-#define PTRS_PER_PMD 1 /* we don't really have any PMD physically */
-#define PTRS_PER_PTE 1024
-
-#define PGD_SIZE PAGE_SIZE
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-
-#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
-#define FIRST_USER_ADDRESS 0
-
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS)
-
-#define TWOLEVEL_PGDIR_SHIFT 22
-#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT)
-#define BOOT_KERNEL_PGD_PTRS (1024 - BOOT_USER_PGD_PTRS)
-
-#ifndef __ASSEMBLY__
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-#endif
-
-/*
- * Unfortunately, due to the way the MMU works on the MN10300, the vmalloc VM
- * area has to be in the lower half of the virtual address range (the upper
- * half is not translated through the TLB).
- *
- * So in this case, the vmalloc area goes at the bottom of the address map
- * (leaving a hole at the very bottom to catch addressing errors), and
- * userspace starts immediately above.
- *
- * The vmalloc() routines also leaves a hole of 4kB between each vmalloced
- * area to catch addressing errors.
- */
-#define VMALLOC_OFFSET (8 * 1024 * 1024)
-#define VMALLOC_START (0x70000000)
-#define VMALLOC_END (0x7C000000)
-
-#ifndef __ASSEMBLY__
-extern pte_t kernel_vmalloc_ptes[(VMALLOC_END - VMALLOC_START) / PAGE_SIZE];
-#endif
-
-/* IPTEL/DPTEL bit assignments */
-#define _PAGE_BIT_VALID xPTEL_V_BIT
-#define _PAGE_BIT_ACCESSED xPTEL_UNUSED1_BIT /* mustn't be loaded into IPTEL/DPTEL */
-#define _PAGE_BIT_NX xPTEL_UNUSED2_BIT /* mustn't be loaded into IPTEL/DPTEL */
-#define _PAGE_BIT_CACHE xPTEL_C_BIT
-#define _PAGE_BIT_PRESENT xPTEL_PV_BIT
-#define _PAGE_BIT_DIRTY xPTEL_D_BIT
-#define _PAGE_BIT_GLOBAL xPTEL_G_BIT
-
-#define _PAGE_VALID xPTEL_V
-#define _PAGE_ACCESSED xPTEL_UNUSED1
-#define _PAGE_NX xPTEL_UNUSED2 /* no-execute bit */
-#define _PAGE_CACHE xPTEL_C
-#define _PAGE_PRESENT xPTEL_PV
-#define _PAGE_DIRTY xPTEL_D
-#define _PAGE_PROT xPTEL_PR
-#define _PAGE_PROT_RKNU xPTEL_PR_ROK
-#define _PAGE_PROT_WKNU xPTEL_PR_RWK
-#define _PAGE_PROT_RKRU xPTEL_PR_ROK_ROU
-#define _PAGE_PROT_WKRU xPTEL_PR_RWK_ROU
-#define _PAGE_PROT_WKWU xPTEL_PR_RWK_RWU
-#define _PAGE_GLOBAL xPTEL_G
-#define _PAGE_PSE xPTEL_PS_4Mb /* 4MB page */
-
-#define _PAGE_FILE xPTEL_UNUSED1_BIT /* set:pagecache unset:swap */
-
-#define __PAGE_PROT_UWAUX 0x040
-#define __PAGE_PROT_USER 0x080
-#define __PAGE_PROT_WRITE 0x100
-
-#define _PAGE_PRESENTV (_PAGE_PRESENT|_PAGE_VALID)
-#define _PAGE_PROTNONE 0x000 /* If not present */
-
-#ifndef __ASSEMBLY__
-
-#define VMALLOC_VMADDR(x) ((unsigned long)(x))
-
-#define _PAGE_TABLE (_PAGE_PRESENTV | _PAGE_PROT_WKNU | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-#define __PAGE_NONE (_PAGE_PRESENTV | _PAGE_PROT_RKNU | _PAGE_ACCESSED | _PAGE_CACHE)
-#define __PAGE_SHARED (_PAGE_PRESENTV | _PAGE_PROT_WKWU | _PAGE_ACCESSED | _PAGE_CACHE)
-#define __PAGE_COPY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
-#define __PAGE_READONLY (_PAGE_PRESENTV | _PAGE_PROT_RKRU | _PAGE_ACCESSED | _PAGE_CACHE)
-
-#define PAGE_NONE __pgprot(__PAGE_NONE | _PAGE_NX)
-#define PAGE_SHARED_NOEXEC __pgprot(__PAGE_SHARED | _PAGE_NX)
-#define PAGE_COPY_NOEXEC __pgprot(__PAGE_COPY | _PAGE_NX)
-#define PAGE_READONLY_NOEXEC __pgprot(__PAGE_READONLY | _PAGE_NX)
-#define PAGE_SHARED_EXEC __pgprot(__PAGE_SHARED)
-#define PAGE_COPY_EXEC __pgprot(__PAGE_COPY)
-#define PAGE_READONLY_EXEC __pgprot(__PAGE_READONLY)
-#define PAGE_COPY PAGE_COPY_NOEXEC
-#define PAGE_READONLY PAGE_READONLY_NOEXEC
-#define PAGE_SHARED PAGE_SHARED_EXEC
-
-#define __PAGE_KERNEL_BASE (_PAGE_PRESENTV | _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_GLOBAL)
-
-#define __PAGE_KERNEL (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_CACHE | _PAGE_NX)
-#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL_BASE | _PAGE_PROT_WKNU | _PAGE_NX)
-#define __PAGE_KERNEL_EXEC (__PAGE_KERNEL & ~_PAGE_NX)
-#define __PAGE_KERNEL_RO (__PAGE_KERNEL_BASE | _PAGE_PROT_RKNU | _PAGE_CACHE | _PAGE_NX)
-#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
-#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
-
-#define PAGE_KERNEL __pgprot(__PAGE_KERNEL)
-#define PAGE_KERNEL_RO __pgprot(__PAGE_KERNEL_RO)
-#define PAGE_KERNEL_EXEC __pgprot(__PAGE_KERNEL_EXEC)
-#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE)
-#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE)
-#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC)
-
-/*
- * Whilst the MN10300 can do page protection for execute (given separate data
- * and insn TLBs), we are not supporting it at the moment. Write permission,
- * however, always implies read permission (but not execute permission).
- */
-#define __P000 PAGE_NONE
-#define __P001 PAGE_READONLY_NOEXEC
-#define __P010 PAGE_COPY_NOEXEC
-#define __P011 PAGE_COPY_NOEXEC
-#define __P100 PAGE_READONLY_EXEC
-#define __P101 PAGE_READONLY_EXEC
-#define __P110 PAGE_COPY_EXEC
-#define __P111 PAGE_COPY_EXEC
-
-#define __S000 PAGE_NONE
-#define __S001 PAGE_READONLY_NOEXEC
-#define __S010 PAGE_SHARED_NOEXEC
-#define __S011 PAGE_SHARED_NOEXEC
-#define __S100 PAGE_READONLY_EXEC
-#define __S101 PAGE_READONLY_EXEC
-#define __S110 PAGE_SHARED_EXEC
-#define __S111 PAGE_SHARED_EXEC
-
-/*
- * Define this to warn about kernel memory accesses that are
- * done without a 'verify_area(VERIFY_WRITE,..)'
- */
-#undef TEST_VERIFY_AREA
-
-#define pte_present(x) (pte_val(x) & _PAGE_VALID)
-#define pte_clear(mm, addr, xp) \
-do { \
- set_pte_at((mm), (addr), (xp), __pte(0)); \
-} while (0)
-
-#define pmd_none(x) (!pmd_val(x))
-#define pmd_present(x) (!pmd_none(x))
-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
-#define pmd_bad(x) 0
-
-
-#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT))
-
-#ifndef __ASSEMBLY__
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-static inline int pte_user(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
-static inline int pte_read(pte_t pte) { return pte_val(pte) & __PAGE_PROT_USER; }
-static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
-static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-static inline int pte_write(pte_t pte) { return pte_val(pte) & __PAGE_PROT_WRITE; }
-static inline int pte_special(pte_t pte){ return 0; }
-
-/*
- * The following only works if pte_present() is not true.
- */
-static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
-
-static inline pte_t pte_rdprotect(pte_t pte)
-{
- pte_val(pte) &= ~(__PAGE_PROT_USER|__PAGE_PROT_UWAUX); return pte;
-}
-static inline pte_t pte_exprotect(pte_t pte)
-{
- pte_val(pte) |= _PAGE_NX; return pte;
-}
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
- pte_val(pte) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX); return pte;
-}
-
-static inline pte_t pte_mkclean(pte_t pte) { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkold(pte_t pte) { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkdirty(pte_t pte) { pte_val(pte) |= _PAGE_DIRTY; return pte; }
-static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
-static inline pte_t pte_mkexec(pte_t pte) { pte_val(pte) &= ~_PAGE_NX; return pte; }
-
-static inline pte_t pte_mkread(pte_t pte)
-{
- pte_val(pte) |= __PAGE_PROT_USER;
- if (pte_write(pte))
- pte_val(pte) |= __PAGE_PROT_UWAUX;
- return pte;
-}
-static inline pte_t pte_mkwrite(pte_t pte)
-{
- pte_val(pte) |= __PAGE_PROT_WRITE;
- if (pte_val(pte) & __PAGE_PROT_USER)
- pte_val(pte) |= __PAGE_PROT_UWAUX;
- return pte;
-}
-
-static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
-
-#define pte_ERROR(e) \
- printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
- __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
- printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
- __FILE__, __LINE__, pgd_val(e))
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_clear(xp) do { } while (0)
-
-/*
- * Certain architectures need to do special things when PTEs
- * within a page table are directly modified. Thus, the following
- * hook is made available.
- */
-#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
-#define set_pte_at(mm, addr, ptep, pteval) set_pte((ptep), (pteval))
-#define set_pte_atomic(pteptr, pteval) set_pte((pteptr), (pteval))
-
-/*
- * (pmds are folded into pgds so this doesn't get actually called,
- * but the define is needed for a generic inline function.)
- */
-#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
-
-#define ptep_get_and_clear(mm, addr, ptep) \
- __pte(xchg(&(ptep)->pte, 0))
-#define pte_same(a, b) (pte_val(a) == pte_val(b))
-#define pte_page(x) pfn_to_page(pte_pfn(x))
-#define pte_none(x) (!pte_val(x))
-#define pte_pfn(x) ((unsigned long) (pte_val(x) >> PAGE_SHIFT))
-#define __pfn_addr(pfn) ((pfn) << PAGE_SHIFT)
-#define pfn_pte(pfn, prot) __pte(__pfn_addr(pfn) | pgprot_val(prot))
-#define pfn_pmd(pfn, prot) __pmd(__pfn_addr(pfn) | pgprot_val(prot))
-
-/*
- * All present user pages are user-executable:
- */
-static inline int pte_exec(pte_t pte)
-{
- return pte_user(pte);
-}
-
-/*
- * All present pages are kernel-executable:
- */
-static inline int pte_exec_kernel(pte_t pte)
-{
- return 1;
-}
-
-/*
- * Bits 0 and 1 are taken, split up the 29 bits of offset
- * into this range:
- */
-#define PTE_FILE_MAX_BITS 29
-
-#define pte_to_pgoff(pte) (pte_val(pte) >> 2)
-#define pgoff_to_pte(off) __pte((off) << 2 | _PAGE_FILE)
-
-/* Encode and de-code a swap entry */
-#define __swp_type(x) (((x).val >> 2) & 0x3f)
-#define __swp_offset(x) ((x).val >> 8)
-#define __swp_entry(type, offset) \
- ((swp_entry_t) { ((type) << 2) | ((offset) << 8) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) __pte((x).val)
-
-static inline
-int ptep_test_and_clear_dirty(struct vm_area_struct *vma, unsigned long addr,
- pte_t *ptep)
-{
- if (!pte_dirty(*ptep))
- return 0;
- return test_and_clear_bit(_PAGE_BIT_DIRTY, &ptep->pte);
-}
-
-static inline
-int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr,
- pte_t *ptep)
-{
- if (!pte_young(*ptep))
- return 0;
- return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte);
-}
-
-static inline
-void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
- pte_val(*ptep) &= ~(__PAGE_PROT_WRITE|__PAGE_PROT_UWAUX);
-}
-
-static inline void ptep_mkdirty(pte_t *ptep)
-{
- set_bit(_PAGE_BIT_DIRTY, &ptep->pte);
-}
-
-/*
- * Macro to mark a page protection value as "uncacheable". On processors which
- * do not support it, this is a no-op.
- */
-#define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_CACHE)
-
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-
-#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-#define mk_pte_huge(entry) \
- ((entry).pte |= _PAGE_PRESENT | _PAGE_PSE | _PAGE_VALID)
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
- pte_val(pte) &= _PAGE_CHG_MASK;
- pte_val(pte) |= pgprot_val(newprot);
- return pte;
-}
-
-#define page_pte(page) page_pte_prot((page), __pgprot(0))
-
-#define pmd_page_kernel(pmd) \
- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
-
-#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
-
-#define pmd_large(pmd) \
- ((pmd_val(pmd) & (_PAGE_PSE | _PAGE_PRESENT)) == \
- (_PAGE_PSE | _PAGE_PRESENT))
-
-/*
- * the pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
- *
- * this macro returns the index of the entry in the pgd page which would
- * control the given virtual address
- */
-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
-
-/*
- * pgd_offset() returns a (pgd_t *)
- * pgd_index() is used get the offset into the pgd page's array of pgd_t's;
- */
-#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
-
-/*
- * a shortcut which implies the use of the kernel's pgd, instead
- * of a process's
- */
-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-
-/*
- * the pmd page can be thought of an array like this: pmd_t[PTRS_PER_PMD]
- *
- * this macro returns the index of the entry in the pmd page which would
- * control the given virtual address
- */
-#define pmd_index(address) \
- (((address) >> PMD_SHIFT) & (PTRS_PER_PMD - 1))
-
-/*
- * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
- *
- * this macro returns the index of the entry in the pte page which would
- * control the given virtual address
- */
-#define pte_index(address) \
- (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-#define pte_offset_kernel(dir, address) \
- ((pte_t *) pmd_page_kernel(*(dir)) + pte_index(address))
-
-/*
- * Make a given kernel text page executable/non-executable.
- * Returns the previous executability setting of that page (which
- * is used to restore the previous state). Used by the SMP bootup code.
- * NOTE: this is an __init function for security reasons.
- */
-static inline int set_kernel_exec(unsigned long vaddr, int enable)
-{
- return 0;
-}
-
-#define pte_offset_map(dir, address) \
- ((pte_t *) page_address(pmd_page(*(dir))) + pte_index(address))
-#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
-#define pte_unmap(pte) do {} while (0)
-#define pte_unmap_nested(pte) do {} while (0)
-
-/*
- * The MN10300 has external MMU info in the form of a TLB: this is adapted from
- * the kernel page tables containing the necessary information by tlb-mn10300.S
- */
-extern void update_mmu_cache(struct vm_area_struct *vma,
- unsigned long address, pte_t pte);
-
-#endif /* !__ASSEMBLY__ */
-
-#define kern_addr_valid(addr) (1)
-
-#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range((vma), (vaddr), (pfn), (size), (prot))
-
-#define MK_IOSPACE_PFN(space, pfn) (pfn)
-#define GET_IOSPACE(pfn) 0
-#define GET_PFN(pfn) (pfn)
-
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
-#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
-#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-#define __HAVE_ARCH_PTEP_SET_WRPROTECT
-#define __HAVE_ARCH_PTEP_MKDIRTY
-#define __HAVE_ARCH_PTE_SAME
-#include <asm-generic/pgtable.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_PGTABLE_H */
+++ /dev/null
-/* MN10300 On-board I/O port module registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PIO_REGS_H
-#define _ASM_PIO_REGS_H
-
-#include <asm/cpu-regs.h>
-#include <asm/intctl-regs.h>
-
-#ifdef __KERNEL__
-
-/* I/O port 0 */
-#define P0MD __SYSREG(0xdb000000, u16) /* mode reg */
-#define P0MD_0 0x0003 /* mask */
-#define P0MD_0_IN 0x0000 /* input mode */
-#define P0MD_0_OUT 0x0001 /* output mode */
-#define P0MD_0_TM0IO 0x0002 /* timer 0 I/O mode */
-#define P0MD_0_EYECLK 0x0003 /* test signal output (clock) */
-#define P0MD_1 0x000c
-#define P0MD_1_IN 0x0000
-#define P0MD_1_OUT 0x0004
-#define P0MD_1_TM1IO 0x0008 /* timer 1 I/O mode */
-#define P0MD_1_EYED 0x000c /* test signal output (data) */
-#define P0MD_2 0x0030
-#define P0MD_2_IN 0x0000
-#define P0MD_2_OUT 0x0010
-#define P0MD_2_TM2IO 0x0020 /* timer 2 I/O mode */
-#define P0MD_3 0x00c0
-#define P0MD_3_IN 0x0000
-#define P0MD_3_OUT 0x0040
-#define P0MD_3_TM3IO 0x0080 /* timer 3 I/O mode */
-#define P0MD_4 0x0300
-#define P0MD_4_IN 0x0000
-#define P0MD_4_OUT 0x0100
-#define P0MD_4_TM4IO 0x0200 /* timer 4 I/O mode */
-#define P0MD_4_XCTS 0x0300 /* XCTS input for serial port 2 */
-#define P0MD_5 0x0c00
-#define P0MD_5_IN 0x0000
-#define P0MD_5_OUT 0x0400
-#define P0MD_5_TM5IO 0x0800 /* timer 5 I/O mode */
-#define P0MD_6 0x3000
-#define P0MD_6_IN 0x0000
-#define P0MD_6_OUT 0x1000
-#define P0MD_6_TM6IOA 0x2000 /* timer 6 I/O mode A */
-#define P0MD_7 0xc000
-#define P0MD_7_IN 0x0000
-#define P0MD_7_OUT 0x4000
-#define P0MD_7_TM6IOB 0x8000 /* timer 6 I/O mode B */
-
-#define P0IN __SYSREG(0xdb000004, u8) /* in reg */
-#define P0OUT __SYSREG(0xdb000008, u8) /* out reg */
-
-#define P0TMIO __SYSREG(0xdb00000c, u8) /* TM pin I/O control reg */
-#define P0TMIO_TM0_IN 0x00
-#define P0TMIO_TM0_OUT 0x01
-#define P0TMIO_TM1_IN 0x00
-#define P0TMIO_TM1_OUT 0x02
-#define P0TMIO_TM2_IN 0x00
-#define P0TMIO_TM2_OUT 0x04
-#define P0TMIO_TM3_IN 0x00
-#define P0TMIO_TM3_OUT 0x08
-#define P0TMIO_TM4_IN 0x00
-#define P0TMIO_TM4_OUT 0x10
-#define P0TMIO_TM5_IN 0x00
-#define P0TMIO_TM5_OUT 0x20
-#define P0TMIO_TM6A_IN 0x00
-#define P0TMIO_TM6A_OUT 0x40
-#define P0TMIO_TM6B_IN 0x00
-#define P0TMIO_TM6B_OUT 0x80
-
-/* I/O port 1 */
-#define P1MD __SYSREG(0xdb000100, u16) /* mode reg */
-#define P1MD_0 0x0003 /* mask */
-#define P1MD_0_IN 0x0000 /* input mode */
-#define P1MD_0_OUT 0x0001 /* output mode */
-#define P1MD_0_TM7IO 0x0002 /* timer 7 I/O mode */
-#define P1MD_0_ADTRG 0x0003 /* A/D converter trigger mode */
-#define P1MD_1 0x000c
-#define P1MD_1_IN 0x0000
-#define P1MD_1_OUT 0x0004
-#define P1MD_1_TM8IO 0x0008 /* timer 8 I/O mode */
-#define P1MD_1_XDMR0 0x000c /* DMA request input 0 mode */
-#define P1MD_2 0x0030
-#define P1MD_2_IN 0x0000
-#define P1MD_2_OUT 0x0010
-#define P1MD_2_TM9IO 0x0020 /* timer 9 I/O mode */
-#define P1MD_2_XDMR1 0x0030 /* DMA request input 1 mode */
-#define P1MD_3 0x00c0
-#define P1MD_3_IN 0x0000
-#define P1MD_3_OUT 0x0040
-#define P1MD_3_TM10IO 0x0080 /* timer 10 I/O mode */
-#define P1MD_3_FRQS0 0x00c0 /* CPU clock multiplier setting input 0 mode */
-#define P1MD_4 0x0300
-#define P1MD_4_IN 0x0000
-#define P1MD_4_OUT 0x0100
-#define P1MD_4_TM11IO 0x0200 /* timer 11 I/O mode */
-#define P1MD_4_FRQS1 0x0300 /* CPU clock multiplier setting input 1 mode */
-
-#define P1IN __SYSREG(0xdb000104, u8) /* in reg */
-#define P1OUT __SYSREG(0xdb000108, u8) /* out reg */
-#define P1TMIO __SYSREG(0xdb00010c, u8) /* TM pin I/O control reg */
-#define P1TMIO_TM11_IN 0x00
-#define P1TMIO_TM11_OUT 0x01
-#define P1TMIO_TM10_IN 0x00
-#define P1TMIO_TM10_OUT 0x02
-#define P1TMIO_TM9_IN 0x00
-#define P1TMIO_TM9_OUT 0x04
-#define P1TMIO_TM8_IN 0x00
-#define P1TMIO_TM8_OUT 0x08
-#define P1TMIO_TM7_IN 0x00
-#define P1TMIO_TM7_OUT 0x10
-
-/* I/O port 2 */
-#define P2MD __SYSREG(0xdb000200, u16) /* mode reg */
-#define P2MD_0 0x0003 /* mask */
-#define P2MD_0_IN 0x0000 /* input mode */
-#define P2MD_0_OUT 0x0001 /* output mode */
-#define P2MD_0_BOOTBW 0x0003 /* boot bus width selector mode */
-#define P2MD_1 0x000c
-#define P2MD_1_IN 0x0000
-#define P2MD_1_OUT 0x0004
-#define P2MD_1_BOOTSEL 0x000c /* boot device selector mode */
-#define P2MD_2 0x0030
-#define P2MD_2_IN 0x0000
-#define P2MD_2_OUT 0x0010
-#define P2MD_3 0x00c0
-#define P2MD_3_IN 0x0000
-#define P2MD_3_OUT 0x0040
-#define P2MD_3_CKIO 0x00c0 /* mode */
-#define P2MD_4 0x0300
-#define P2MD_4_IN 0x0000
-#define P2MD_4_OUT 0x0100
-#define P2MD_4_CMOD 0x0300 /* mode */
-
-#define P2IN __SYSREG(0xdb000204, u8) /* in reg */
-#define P2OUT __SYSREG(0xdb000208, u8) /* out reg */
-#define P2TMIO __SYSREG(0xdb00020c, u8) /* TM pin I/O control reg */
-
-/* I/O port 3 */
-#define P3MD __SYSREG(0xdb000300, u16) /* mode reg */
-#define P3MD_0 0x0003 /* mask */
-#define P3MD_0_IN 0x0000 /* input mode */
-#define P3MD_0_OUT 0x0001 /* output mode */
-#define P3MD_0_AFRXD 0x0002 /* AFR interface mode */
-#define P3MD_1 0x000c
-#define P3MD_1_IN 0x0000
-#define P3MD_1_OUT 0x0004
-#define P3MD_1_AFTXD 0x0008 /* AFR interface mode */
-#define P3MD_2 0x0030
-#define P3MD_2_IN 0x0000
-#define P3MD_2_OUT 0x0010
-#define P3MD_2_AFSCLK 0x0020 /* AFR interface mode */
-#define P3MD_3 0x00c0
-#define P3MD_3_IN 0x0000
-#define P3MD_3_OUT 0x0040
-#define P3MD_3_AFFS 0x0080 /* AFR interface mode */
-#define P3MD_4 0x0300
-#define P3MD_4_IN 0x0000
-#define P3MD_4_OUT 0x0100
-#define P3MD_4_AFEHC 0x0200 /* AFR interface mode */
-
-#define P3IN __SYSREG(0xdb000304, u8) /* in reg */
-#define P3OUT __SYSREG(0xdb000308, u8) /* out reg */
-
-/* I/O port 4 */
-#define P4MD __SYSREG(0xdb000400, u16) /* mode reg */
-#define P4MD_0 0x0003 /* mask */
-#define P4MD_0_IN 0x0000 /* input mode */
-#define P4MD_0_OUT 0x0001 /* output mode */
-#define P4MD_0_SCL0 0x0002 /* I2C/serial mode */
-#define P4MD_1 0x000c
-#define P4MD_1_IN 0x0000
-#define P4MD_1_OUT 0x0004
-#define P4MD_1_SDA0 0x0008
-#define P4MD_2 0x0030
-#define P4MD_2_IN 0x0000
-#define P4MD_2_OUT 0x0010
-#define P4MD_2_SCL1 0x0020
-#define P4MD_3 0x00c0
-#define P4MD_3_IN 0x0000
-#define P4MD_3_OUT 0x0040
-#define P4MD_3_SDA1 0x0080
-#define P4MD_4 0x0300
-#define P4MD_4_IN 0x0000
-#define P4MD_4_OUT 0x0100
-#define P4MD_4_SBO0 0x0200
-#define P4MD_5 0x0c00
-#define P4MD_5_IN 0x0000
-#define P4MD_5_OUT 0x0400
-#define P4MD_5_SBO1 0x0800
-#define P4MD_6 0x3000
-#define P4MD_6_IN 0x0000
-#define P4MD_6_OUT 0x1000
-#define P4MD_6_SBT0 0x2000
-#define P4MD_7 0xc000
-#define P4MD_7_IN 0x0000
-#define P4MD_7_OUT 0x4000
-#define P4MD_7_SBT1 0x8000
-
-#define P4IN __SYSREG(0xdb000404, u8) /* in reg */
-#define P4OUT __SYSREG(0xdb000408, u8) /* out reg */
-
-/* I/O port 5 */
-#define P5MD __SYSREG(0xdb000500, u16) /* mode reg */
-#define P5MD_0 0x0003 /* mask */
-#define P5MD_0_IN 0x0000 /* input mode */
-#define P5MD_0_OUT 0x0001 /* output mode */
-#define P5MD_0_IRTXD 0x0002 /* IrDA mode */
-#define P5MD_0_SOUT 0x0004 /* serial mode */
-#define P5MD_1 0x000c
-#define P5MD_1_IN 0x0000
-#define P5MD_1_OUT 0x0004
-#define P5MD_1_IRRXDS 0x0008 /* IrDA mode */
-#define P5MD_1_SIN 0x000c /* serial mode */
-#define P5MD_2 0x0030
-#define P5MD_2_IN 0x0000
-#define P5MD_2_OUT 0x0010
-#define P5MD_2_IRRXDF 0x0020 /* IrDA mode */
-
-#define P5IN __SYSREG(0xdb000504, u8) /* in reg */
-#define P5OUT __SYSREG(0xdb000508, u8) /* out reg */
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_PIO_REGS_H */
+++ /dev/null
-#include <asm-generic/poll.h>
+++ /dev/null
-/* MN10300 POSIX types
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_POSIX_TYPES_H
-#define _ASM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned long __kernel_size_t;
-typedef long __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-typedef unsigned short __kernel_old_dev_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-static inline void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
-}
-
-#undef __FD_CLR
-static inline void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
-}
-
-
-#undef __FD_ISSET
-static inline int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
-{
- unsigned long __tmp = __fd / __NFDBITS;
- unsigned long __rem = __fd % __NFDBITS;
- return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static inline void __FD_ZERO(__kernel_fd_set *__p)
-{
- unsigned long *__tmp = __p->fds_bits;
- int __i;
-
- if (__builtin_constant_p(__FDSET_LONGS)) {
- switch (__FDSET_LONGS) {
- case 16:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- __tmp[ 4] = 0; __tmp[ 5] = 0;
- __tmp[ 6] = 0; __tmp[ 7] = 0;
- __tmp[ 8] = 0; __tmp[ 9] = 0;
- __tmp[10] = 0; __tmp[11] = 0;
- __tmp[12] = 0; __tmp[13] = 0;
- __tmp[14] = 0; __tmp[15] = 0;
- return;
-
- case 8:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- __tmp[ 4] = 0; __tmp[ 5] = 0;
- __tmp[ 6] = 0; __tmp[ 7] = 0;
- return;
-
- case 4:
- __tmp[ 0] = 0; __tmp[ 1] = 0;
- __tmp[ 2] = 0; __tmp[ 3] = 0;
- return;
- }
- }
- __i = __FDSET_LONGS;
- while (__i) {
- __i--;
- *__tmp = 0;
- __tmp++;
- }
-}
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif /* _ASM_POSIX_TYPES_H */
+++ /dev/null
-/* MN103E010 Cache specification
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PROC_CACHE_H
-#define _ASM_PROC_CACHE_H
-
-/* L1 cache */
-
-#define L1_CACHE_NWAYS 4 /* number of ways in caches */
-#define L1_CACHE_NENTRIES 256 /* number of entries in each way */
-#define L1_CACHE_BYTES 16 /* bytes per entry */
-#define L1_CACHE_SHIFT 4 /* shift for bytes per entry */
-#define L1_CACHE_WAYDISP 0x1000 /* displacement of one way from the next */
-
-#define L1_CACHE_TAG_VALID 0x00000001 /* cache tag valid bit */
-#define L1_CACHE_TAG_DIRTY 0x00000008 /* data cache tag dirty bit */
-#define L1_CACHE_TAG_ENTRY 0x00000ff0 /* cache tag entry address mask */
-#define L1_CACHE_TAG_ADDRESS 0xfffff000 /* cache tag line address mask */
-
-/*
- * specification of the interval between interrupt checking intervals whilst
- * managing the cache with the interrupts disabled
- */
-#define MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL 4
-
-#endif /* _ASM_PROC_CACHE_H */
+++ /dev/null
-/* MN103E010-specific clocks
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PROC_CLOCK_H
-#define _ASM_PROC_CLOCK_H
-
-#include <asm/unit/clock.h>
-
-#define MN10300_WDCLK MN10300_IOCLK
-
-#endif /* _ASM_PROC_CLOCK_H */
+++ /dev/null
-/* MN103E010 On-board interrupt controller numbers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_PROC_IRQ_H
-#define _ASM_PROC_IRQ_H
-
-#ifdef __KERNEL__
-
-#define GxICR_NUM_IRQS 42
-
-#define GxICR_NUM_XIRQS 8
-
-#define XIRQ0 34
-#define XIRQ1 35
-#define XIRQ2 36
-#define XIRQ3 37
-#define XIRQ4 38
-#define XIRQ5 39
-#define XIRQ6 40
-#define XIRQ7 41
-
-#define XIRQ2IRQ(num) (XIRQ0 + num)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_PROC_IRQ_H */
+++ /dev/null
-/* MN103E010 Processor description
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_PROC_PROC_H
-#define _ASM_PROC_PROC_H
-
-#define PROCESSOR_VENDOR_NAME "Matsushita"
-#define PROCESSOR_MODEL_NAME "mn103e010"
-
-#endif /* _ASM_PROC_PROC_H */
+++ /dev/null
-/* MN10300 Processor specifics
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_PROCESSOR_H
-#define _ASM_PROCESSOR_H
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/cpu-regs.h>
-#include <linux/threads.h>
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-struct mm_struct;
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() \
-({ \
- void *__pc; \
- asm("mov pc,%0" : "=a"(__pc)); \
- __pc; \
-})
-
-extern void show_registers(struct pt_regs *regs);
-
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-struct mn10300_cpuinfo {
- int type;
- unsigned long loops_per_sec;
- char hard_math;
- unsigned long *pgd_quick;
- unsigned long *pte_quick;
- unsigned long pgtable_cache_sz;
-};
-
-extern struct mn10300_cpuinfo boot_cpu_data;
-
-#define cpu_data &boot_cpu_data
-#define current_cpu_data boot_cpu_data
-
-extern void identify_cpu(struct mn10300_cpuinfo *);
-extern void print_cpu_info(struct mn10300_cpuinfo *);
-extern void dodgy_tsc(void);
-#define cpu_relax() barrier()
-
-/*
- * User space process size: 1.75GB (default).
- */
-#define TASK_SIZE 0x70000000
-
-/*
- * Where to put the userspace stack by default
- */
-#define STACK_TOP 0x70000000
-#define STACK_TOP_MAX STACK_TOP
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE 0x30000000
-
-typedef struct {
- unsigned long seg;
-} mm_segment_t;
-
-struct fpu_state_struct {
- unsigned long fs[32]; /* fpu registers */
- unsigned long fpcr; /* fpu control register */
-};
-
-struct thread_struct {
- struct pt_regs *uregs; /* userspace register frame */
- unsigned long pc; /* kernel PC */
- unsigned long sp; /* kernel SP */
- unsigned long a3; /* kernel FP */
- unsigned long wchan;
- unsigned long usp;
- struct pt_regs *__frame;
- unsigned long fpu_flags;
-#define THREAD_USING_FPU 0x00000001 /* T if this task is using the FPU */
- struct fpu_state_struct fpu_state;
-};
-
-#define INIT_THREAD \
-{ \
- .uregs = init_uregs, \
- .pc = 0, \
- .sp = 0, \
- .a3 = 0, \
- .wchan = 0, \
- .__frame = NULL, \
-}
-
-#define INIT_MMAP \
-{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, \
- NULL, NULL }
-
-/*
- * do necessary setup to start up a newly executed thread
- * - need to discard the frame stacked by the kernel thread invoking the execve
- * syscall (see RESTORE_ALL macro)
- */
-#define start_thread(regs, new_pc, new_sp) do { \
- set_fs(USER_DS); \
- __frame = current->thread.uregs; \
- __frame->epsw = EPSW_nSL | EPSW_IE | EPSW_IM; \
- __frame->pc = new_pc; \
- __frame->sp = new_sp; \
-} while (0)
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-/* Prepare to copy thread state - unlazy all lazy status */
-extern void prepare_to_copy(struct task_struct *tsk);
-
-/*
- * create a kernel thread without removing it from tasklists
- */
-extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/*
- * Return saved PC of a blocked thread.
- */
-extern unsigned long thread_saved_pc(struct task_struct *tsk);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define task_pt_regs(task) \
-({ \
- struct pt_regs *__regs__; \
- __regs__ = (struct pt_regs *) (KSTK_TOP(task_stack_page(task)) - 8); \
- __regs__ - 1; \
-})
-
-#define KSTK_EIP(task) (task_pt_regs(task)->pc)
-#define KSTK_ESP(task) (task_pt_regs(task)->sp)
-
-#define KSTK_TOP(info) \
-({ \
- (unsigned long)(info) + THREAD_SIZE; \
-})
-
-#define ARCH_HAS_PREFETCH
-#define ARCH_HAS_PREFETCHW
-
-static inline void prefetch(const void *x)
-{
-#ifndef CONFIG_MN10300_CACHE_DISABLED
-#ifdef CONFIG_MN10300_PROC_MN103E010
- asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
-#else
- asm volatile ("dcpf (%0)" : : "r"(x));
-#endif
-#endif
-}
-
-static inline void prefetchw(const void *x)
-{
-#ifndef CONFIG_MN10300_CACHE_DISABLED
-#ifdef CONFIG_MN10300_PROC_MN103E010
- asm volatile ("nop; nop; dcpf (%0)" : : "r"(x));
-#else
- asm volatile ("dcpf (%0)" : : "r"(x));
-#endif
-#endif
-}
-
-#endif /* _ASM_PROCESSOR_H */
+++ /dev/null
-/* MN10300 Exception frame layout and ptrace constants
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_PTRACE_H
-#define _ASM_PTRACE_H
-
-#define PT_A3 0
-#define PT_A2 1
-#define PT_D3 2
-#define PT_D2 3
-#define PT_MCVF 4
-#define PT_MCRL 5
-#define PT_MCRH 6
-#define PT_MDRQ 7
-#define PT_E1 8
-#define PT_E0 9
-#define PT_E7 10
-#define PT_E6 11
-#define PT_E5 12
-#define PT_E4 13
-#define PT_E3 14
-#define PT_E2 15
-#define PT_SP 16
-#define PT_LAR 17
-#define PT_LIR 18
-#define PT_MDR 19
-#define PT_A1 20
-#define PT_A0 21
-#define PT_D1 22
-#define PT_D0 23
-#define PT_ORIG_D0 24
-#define PT_EPSW 25
-#define PT_PC 26
-#define NR_PTREGS 27
-
-#ifndef __ASSEMBLY__
-/*
- * This defines the way registers are stored in the event of an exception
- * - the strange order is due to the MOVM instruction
- */
-struct pt_regs {
- unsigned long a3; /* syscall arg 3 */
- unsigned long a2; /* syscall arg 4 */
- unsigned long d3; /* syscall arg 5 */
- unsigned long d2; /* syscall arg 6 */
- unsigned long mcvf;
- unsigned long mcrl;
- unsigned long mcrh;
- unsigned long mdrq;
- unsigned long e1;
- unsigned long e0;
- unsigned long e7;
- unsigned long e6;
- unsigned long e5;
- unsigned long e4;
- unsigned long e3;
- unsigned long e2;
- unsigned long sp;
- unsigned long lar;
- unsigned long lir;
- unsigned long mdr;
- unsigned long a1;
- unsigned long a0; /* syscall arg 1 */
- unsigned long d1; /* syscall arg 2 */
- unsigned long d0; /* syscall ret */
- struct pt_regs *next; /* next frame pointer */
- unsigned long orig_d0; /* syscall number */
- unsigned long epsw;
- unsigned long pc;
-};
-#endif
-
-extern struct pt_regs *__frame; /* current frame pointer */
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS 12
-#define PTRACE_SETREGS 13
-#define PTRACE_GETFPREGS 14
-#define PTRACE_SETFPREGS 15
-
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
-#if defined(__KERNEL__)
-
-#if !defined(__ASSEMBLY__)
-#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
-#define instruction_pointer(regs) ((regs)->pc)
-extern void show_regs(struct pt_regs *);
-#endif /* !__ASSEMBLY */
-
-#define profile_pc(regs) ((regs)->pc)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_PTRACE_H */
+++ /dev/null
-/* MN10300 Reset controller and watchdog timer definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_RESET_REGS_H
-#define _ASM_RESET_REGS_H
-
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-
-#ifdef __KERNEL__
-
-#ifdef CONFIG_MN10300_WD_TIMER
-#define ARCH_HAS_NMI_WATCHDOG /* See include/linux/nmi.h */
-#endif
-
-/*
- * watchdog timer registers
- */
-#define WDBC __SYSREGC(0xc0001000, u8) /* watchdog binary counter reg */
-
-#define WDCTR __SYSREG(0xc0001002, u8) /* watchdog timer control reg */
-#define WDCTR_WDCK 0x07 /* clock source selection */
-#define WDCTR_WDCK_256th 0x00 /* - OSCI/256 */
-#define WDCTR_WDCK_1024th 0x01 /* - OSCI/1024 */
-#define WDCTR_WDCK_2048th 0x02 /* - OSCI/2048 */
-#define WDCTR_WDCK_16384th 0x03 /* - OSCI/16384 */
-#define WDCTR_WDCK_65536th 0x04 /* - OSCI/65536 */
-#define WDCTR_WDRST 0x40 /* binary counter reset */
-#define WDCTR_WDCNE 0x80 /* watchdog timer enable */
-
-#define RSTCTR __SYSREG(0xc0001004, u8) /* reset control reg */
-#define RSTCTR_CHIPRST 0x01 /* chip reset */
-#define RSTCTR_DBFRST 0x02 /* double fault reset flag */
-#define RSTCTR_WDTRST 0x04 /* watchdog timer reset flag */
-#define RSTCTR_WDREN 0x08 /* watchdog timer reset enable */
-
-#ifndef __ASSEMBLY__
-
-static inline void mn10300_proc_hard_reset(void)
-{
- RSTCTR &= ~RSTCTR_CHIPRST;
- RSTCTR |= RSTCTR_CHIPRST;
-}
-
-extern unsigned int watchdog_alert_counter;
-
-extern void watchdog_go(void);
-extern asmlinkage void watchdog_handler(void);
-extern asmlinkage
-void watchdog_interrupt(struct pt_regs *, enum exception_code);
-
-#endif
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_RESET_REGS_H */
+++ /dev/null
-#include <asm-generic/resource.h>
+++ /dev/null
-/* MN10300 on-chip Real-Time Clock registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_RTC_REGS_H
-#define _ASM_RTC_REGS_H
-
-#include <asm/intctl-regs.h>
-
-#ifdef __KERNEL__
-
-#define RTSCR __SYSREG(0xd8600000, u8) /* RTC seconds count reg */
-#define RTSAR __SYSREG(0xd8600001, u8) /* RTC seconds alarm reg */
-#define RTMCR __SYSREG(0xd8600002, u8) /* RTC minutes count reg */
-#define RTMAR __SYSREG(0xd8600003, u8) /* RTC minutes alarm reg */
-#define RTHCR __SYSREG(0xd8600004, u8) /* RTC hours count reg */
-#define RTHAR __SYSREG(0xd8600005, u8) /* RTC hours alarm reg */
-#define RTDWCR __SYSREG(0xd8600006, u8) /* RTC day of the week count reg */
-#define RTDMCR __SYSREG(0xd8600007, u8) /* RTC days count reg */
-#define RTMTCR __SYSREG(0xd8600008, u8) /* RTC months count reg */
-#define RTYCR __SYSREG(0xd8600009, u8) /* RTC years count reg */
-
-#define RTCRA __SYSREG(0xd860000a, u8)/* RTC control reg A */
-#define RTCRA_RS 0x0f /* periodic timer interrupt cycle setting */
-#define RTCRA_RS_NONE 0x00 /* - off */
-#define RTCRA_RS_3_90625ms 0x01 /* - 3.90625ms (1/256s) */
-#define RTCRA_RS_7_8125ms 0x02 /* - 7.8125ms (1/128s) */
-#define RTCRA_RS_122_070us 0x03 /* - 122.070us (1/8192s) */
-#define RTCRA_RS_244_141us 0x04 /* - 244.141us (1/4096s) */
-#define RTCRA_RS_488_281us 0x05 /* - 488.281us (1/2048s) */
-#define RTCRA_RS_976_5625us 0x06 /* - 976.5625us (1/1024s) */
-#define RTCRA_RS_1_953125ms 0x07 /* - 1.953125ms (1/512s) */
-#define RTCRA_RS_3_90624ms 0x08 /* - 3.90624ms (1/256s) */
-#define RTCRA_RS_7_8125ms_b 0x09 /* - 7.8125ms (1/128s) */
-#define RTCRA_RS_15_625ms 0x0a /* - 15.625ms (1/64s) */
-#define RTCRA_RS_31_25ms 0x0b /* - 31.25ms (1/32s) */
-#define RTCRA_RS_62_5ms 0x0c /* - 62.5ms (1/16s) */
-#define RTCRA_RS_125ms 0x0d /* - 125ms (1/8s) */
-#define RTCRA_RS_250ms 0x0e /* - 250ms (1/4s) */
-#define RTCRA_RS_500ms 0x0f /* - 500ms (1/2s) */
-#define RTCRA_DVR 0x40 /* divider reset */
-#define RTCRA_UIP 0x80 /* clock update flag */
-
-#define RTCRB __SYSREG(0xd860000b, u8) /* RTC control reg B */
-#define RTCRB_DSE 0x01 /* daylight savings time enable */
-#define RTCRB_TM 0x02 /* time format */
-#define RTCRB_TM_12HR 0x00 /* - 12 hour format */
-#define RTCRB_TM_24HR 0x02 /* - 24 hour format */
-#define RTCRB_DM 0x04 /* numeric value format */
-#define RTCRB_DM_BCD 0x00 /* - BCD */
-#define RTCRB_DM_BINARY 0x04 /* - binary */
-#define RTCRB_UIE 0x10 /* update interrupt disable */
-#define RTCRB_AIE 0x20 /* alarm interrupt disable */
-#define RTCRB_PIE 0x40 /* periodic interrupt disable */
-#define RTCRB_SET 0x80 /* clock update enable */
-
-#define RTSRC __SYSREG(0xd860000c, u8) /* RTC status reg C */
-#define RTSRC_UF 0x10 /* update end interrupt flag */
-#define RTSRC_AF 0x20 /* alarm interrupt flag */
-#define RTSRC_PF 0x40 /* periodic interrupt flag */
-#define RTSRC_IRQF 0x80 /* interrupt flag */
-
-#define RTIRQ 32
-#define RTICR GxICR(RTIRQ)
-
-/*
- * MC146818 RTC compatibility defs for the MN10300 on-chip RTC
- */
-#define RTC_PORT(x) 0xd8600000
-#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */
-
-#define CMOS_READ(addr) __SYSREG(0xd8600000 + (addr), u8)
-#define CMOS_WRITE(val, addr) \
- do { __SYSREG(0xd8600000 + (addr), u8) = val; } while (0)
-
-#define RTC_IRQ RTIRQ
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_RTC_REGS_H */
+++ /dev/null
-/* MN10300 Real time clock definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_RTC_H
-#define _ASM_RTC_H
-
-#ifdef CONFIG_MN10300_RTC
-
-#include <linux/init.h>
-
-extern void check_rtc_time(void);
-extern void __init calibrate_clock(void);
-extern unsigned long __init get_initial_rtc_time(void);
-
-#else /* !CONFIG_MN10300_RTC */
-
-static inline void check_rtc_time(void)
-{
-}
-
-static inline void calibrate_clock(void)
-{
-}
-
-static inline unsigned long get_initial_rtc_time(void)
-{
- return 0;
-}
-
-#endif /* !CONFIG_MN10300_RTC */
-
-#include <asm-generic/rtc.h>
-
-#endif /* _ASM_RTC_H */
+++ /dev/null
-/* MN10300 Scatterlist definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SCATTERLIST_H
-#define _ASM_SCATTERLIST_H
-
-#include <asm/types.h>
-
-/*
- * Drivers must set either ->address or (preferred) page and ->offset
- * to indicate where data must be transferred to/from.
- *
- * Using page is recommended since it handles highmem data as well as
- * low mem. ->address is restricted to data which has a virtual mapping, and
- * it will go away in the future. Updating to page can be automated very
- * easily -- something like
- *
- * sg->address = some_ptr;
- *
- * can be rewritten as
- *
- * sg_set_page(virt_to_page(some_ptr));
- * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK;
- *
- * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens
- */
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned int offset; /* for highmem, page offset */
- dma_addr_t dma_address;
- unsigned int length;
-};
-
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg) ((sg)->dma_address)
-#define sg_dma_len(sg) ((sg)->length)
-
-#endif /* _ASM_SCATTERLIST_H */
+++ /dev/null
-#include <asm-generic/sections.h>
+++ /dev/null
-#ifndef _ASM_SEMBUF_H
-#define _ASM_SEMBUF_H
-
-/*
- * The semid64_ds structure for MN10300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_SEMBUF_H */
+++ /dev/null
-/* MN10300 on-board serial port module registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_SERIAL_REGS_H
-#define _ASM_SERIAL_REGS_H
-
-#include <asm/cpu-regs.h>
-#include <asm/intctl-regs.h>
-
-#ifdef __KERNEL__
-
-/* serial port 0 */
-#define SC0CTR __SYSREG(0xd4002000, u16) /* control reg */
-#define SC01CTR_CK 0x0007 /* clock source select */
-#define SC0CTR_CK_TM8UFLOW_8 0x0000 /* - 1/8 timer 8 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM9UFLOW_8 0x0000 /* - 1/8 timer 9 underflow (serial port 1 only) */
-#define SC01CTR_CK_IOCLK_8 0x0001 /* - 1/8 IOCLK */
-#define SC01CTR_CK_IOCLK_32 0x0002 /* - 1/32 IOCLK */
-#define SC0CTR_CK_TM2UFLOW_2 0x0003 /* - 1/2 timer 2 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM3UFLOW_2 0x0003 /* - 1/2 timer 3 underflow (serial port 1 only) */
-#define SC0CTR_CK_TM0UFLOW_8 0x0004 /* - 1/8 timer 1 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM1UFLOW_8 0x0004 /* - 1/8 timer 2 underflow (serial port 1 only) */
-#define SC0CTR_CK_TM2UFLOW_8 0x0005 /* - 1/8 timer 2 underflow (serial port 0 only) */
-#define SC1CTR_CK_TM3UFLOW_8 0x0005 /* - 1/8 timer 3 underflow (serial port 1 only) */
-#define SC01CTR_CK_EXTERN_8 0x0006 /* - 1/8 external closk */
-#define SC01CTR_CK_EXTERN 0x0007 /* - external closk */
-#define SC01CTR_STB 0x0008 /* stop bit select */
-#define SC01CTR_STB_1BIT 0x0000 /* - 1 stop bit */
-#define SC01CTR_STB_2BIT 0x0008 /* - 2 stop bits */
-#define SC01CTR_PB 0x0070 /* parity bit select */
-#define SC01CTR_PB_NONE 0x0000 /* - no parity */
-#define SC01CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
-#define SC01CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
-#define SC01CTR_PB_EVEN 0x0060 /* - even parity */
-#define SC01CTR_PB_ODD 0x0070 /* - odd parity */
-#define SC01CTR_CLN 0x0080 /* character length */
-#define SC01CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
-#define SC01CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
-#define SC01CTR_TOE 0x0100 /* T input output enable */
-#define SC01CTR_OD 0x0200 /* bit order select */
-#define SC01CTR_OD_LSBFIRST 0x0000 /* - LSB first */
-#define SC01CTR_OD_MSBFIRST 0x0200 /* - MSB first */
-#define SC01CTR_MD 0x0c00 /* mode select */
-#define SC01CTR_MD_STST_SYNC 0x0000 /* - start-stop synchronous */
-#define SC01CTR_MD_CLOCK_SYNC1 0x0400 /* - clock synchronous 1 */
-#define SC01CTR_MD_I2C 0x0800 /* - I2C mode */
-#define SC01CTR_MD_CLOCK_SYNC2 0x0c00 /* - clock synchronous 2 */
-#define SC01CTR_IIC 0x1000 /* I2C mode select */
-#define SC01CTR_BKE 0x2000 /* break transmit enable */
-#define SC01CTR_RXE 0x4000 /* receive enable */
-#define SC01CTR_TXE 0x8000 /* transmit enable */
-
-#define SC0ICR __SYSREG(0xd4002004, u8) /* interrupt control reg */
-#define SC01ICR_DMD 0x80 /* output data mode */
-#define SC01ICR_TD 0x20 /* transmit DMA trigger cause */
-#define SC01ICR_TI 0x10 /* transmit interrupt cause */
-#define SC01ICR_RES 0x04 /* receive error select */
-#define SC01ICR_RI 0x01 /* receive interrupt cause */
-
-#define SC0TXB __SYSREG(0xd4002008, u8) /* transmit buffer reg */
-#define SC0RXB __SYSREG(0xd4002009, u8) /* receive buffer reg */
-
-#define SC0STR __SYSREG(0xd400200c, u16) /* status reg */
-#define SC01STR_OEF 0x0001 /* overrun error found */
-#define SC01STR_PEF 0x0002 /* parity error found */
-#define SC01STR_FEF 0x0004 /* framing error found */
-#define SC01STR_RBF 0x0010 /* receive buffer status */
-#define SC01STR_TBF 0x0020 /* transmit buffer status */
-#define SC01STR_RXF 0x0040 /* receive status */
-#define SC01STR_TXF 0x0080 /* transmit status */
-#define SC01STR_STF 0x0100 /* I2C start sequence found */
-#define SC01STR_SPF 0x0200 /* I2C stop sequence found */
-
-#define SC0RXIRQ 20 /* timer 0 Receive IRQ */
-#define SC0TXIRQ 21 /* timer 0 Transmit IRQ */
-
-#define SC0RXICR GxICR(SC0RXIRQ) /* serial 0 receive intr ctrl reg */
-#define SC0TXICR GxICR(SC0TXIRQ) /* serial 0 transmit intr ctrl reg */
-
-/* serial port 1 */
-#define SC1CTR __SYSREG(0xd4002010, u16) /* serial port 1 control */
-#define SC1ICR __SYSREG(0xd4002014, u8) /* interrupt control reg */
-#define SC1TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
-#define SC1RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
-#define SC1STR __SYSREG(0xd400201c, u16) /* status reg */
-
-#define SC1RXIRQ 22 /* timer 1 Receive IRQ */
-#define SC1TXIRQ 23 /* timer 1 Transmit IRQ */
-
-#define SC1RXICR GxICR(SC1RXIRQ) /* serial 1 receive intr ctrl reg */
-#define SC1TXICR GxICR(SC1TXIRQ) /* serial 1 transmit intr ctrl reg */
-
-/* serial port 2 */
-#define SC2CTR __SYSREG(0xd4002020, u16) /* control reg */
-#define SC2CTR_CK 0x0003 /* clock source select */
-#define SC2CTR_CK_TM10UFLOW 0x0000 /* - timer 10 underflow */
-#define SC2CTR_CK_TM2UFLOW 0x0001 /* - timer 2 underflow */
-#define SC2CTR_CK_EXTERN 0x0002 /* - external closk */
-#define SC2CTR_CK_TM3UFLOW 0x0003 /* - timer 3 underflow */
-#define SC2CTR_STB 0x0008 /* stop bit select */
-#define SC2CTR_STB_1BIT 0x0000 /* - 1 stop bit */
-#define SC2CTR_STB_2BIT 0x0008 /* - 2 stop bits */
-#define SC2CTR_PB 0x0070 /* parity bit select */
-#define SC2CTR_PB_NONE 0x0000 /* - no parity */
-#define SC2CTR_PB_FIXED0 0x0040 /* - fixed at 0 */
-#define SC2CTR_PB_FIXED1 0x0050 /* - fixed at 1 */
-#define SC2CTR_PB_EVEN 0x0060 /* - even parity */
-#define SC2CTR_PB_ODD 0x0070 /* - odd parity */
-#define SC2CTR_CLN 0x0080 /* character length */
-#define SC2CTR_CLN_7BIT 0x0000 /* - 7 bit chars */
-#define SC2CTR_CLN_8BIT 0x0080 /* - 8 bit chars */
-#define SC2CTR_TWE 0x0100 /* transmit wait enable (enable XCTS control) */
-#define SC2CTR_OD 0x0200 /* bit order select */
-#define SC2CTR_OD_LSBFIRST 0x0000 /* - LSB first */
-#define SC2CTR_OD_MSBFIRST 0x0200 /* - MSB first */
-#define SC2CTR_TWS 0x1000 /* transmit wait select */
-#define SC2CTR_TWS_XCTS_HIGH 0x0000 /* - interrupt TX when XCTS high */
-#define SC2CTR_TWS_XCTS_LOW 0x1000 /* - interrupt TX when XCTS low */
-#define SC2CTR_BKE 0x2000 /* break transmit enable */
-#define SC2CTR_RXE 0x4000 /* receive enable */
-#define SC2CTR_TXE 0x8000 /* transmit enable */
-
-#define SC2ICR __SYSREG(0xd4002024, u8) /* interrupt control reg */
-#define SC2ICR_TD 0x20 /* transmit DMA trigger cause */
-#define SC2ICR_TI 0x10 /* transmit interrupt cause */
-#define SC2ICR_RES 0x04 /* receive error select */
-#define SC2ICR_RI 0x01 /* receive interrupt cause */
-
-#define SC2TXB __SYSREG(0xd4002018, u8) /* transmit buffer reg */
-#define SC2RXB __SYSREG(0xd4002019, u8) /* receive buffer reg */
-#define SC2STR __SYSREG(0xd400201c, u8) /* status reg */
-#define SC2STR_OEF 0x0001 /* overrun error found */
-#define SC2STR_PEF 0x0002 /* parity error found */
-#define SC2STR_FEF 0x0004 /* framing error found */
-#define SC2STR_CTS 0x0008 /* XCTS input pin status (0 means high) */
-#define SC2STR_RBF 0x0010 /* receive buffer status */
-#define SC2STR_TBF 0x0020 /* transmit buffer status */
-#define SC2STR_RXF 0x0040 /* receive status */
-#define SC2STR_TXF 0x0080 /* transmit status */
-
-#define SC2TIM __SYSREG(0xd400202d, u8) /* status reg */
-
-#define SC2RXIRQ 24 /* serial 2 Receive IRQ */
-#define SC2TXIRQ 25 /* serial 2 Transmit IRQ */
-
-#define SC2RXICR GxICR(SC2RXIRQ) /* serial 2 receive intr ctrl reg */
-#define SC2TXICR GxICR(SC2TXIRQ) /* serial 2 transmit intr ctrl reg */
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_SERIAL_REGS_H */
+++ /dev/null
-/* Standard UART definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-/*
- * The ASB2305 has an 18.432 MHz clock the UART
- */
-#define BASE_BAUD (18432000 / 16)
-
-/* Standard COM flags (except for COM4, because of the 8514 problem) */
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
-#endif
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define FOURPORT_FLAGS ASYNC_FOURPORT
-#define ACCENT_FLAGS 0
-#define BOCA_FLAGS 0
-#define HUB6_FLAGS 0
-#define RS_TABLE_SIZE 64
-#else
-#define RS_TABLE_SIZE
-#endif
-
-#include <asm/unit/serial.h>
+++ /dev/null
-/* MN10300 Setup declarations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SETUP_H
-#define _ASM_SETUP_H
-
-extern void __init unit_setup(void);
-extern void __init unit_init_IRQ(void);
-
-#endif /* _ASM_SETUP_H */
+++ /dev/null
-#ifndef _ASM_SHMBUF_H
-#define _ASM_SHMBUF_H
-
-/*
- * The shmid64_ds structure for MN10300 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* _ASM_SHMBUF_H */
+++ /dev/null
-#ifndef _ASM_SHMPARAM_H
-#define _ASM_SHMPARAM_H
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* _ASM_SHMPARAM_H */
+++ /dev/null
-/* MN10300 Userspace signal context
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SIGCONTEXT_H
-#define _ASM_SIGCONTEXT_H
-
-struct fpucontext {
- /* Regular FPU environment */
- unsigned long fs[32]; /* fpu registers */
- unsigned long fpcr; /* fpu control register */
-};
-
-struct sigcontext {
- unsigned long d0;
- unsigned long d1;
- unsigned long d2;
- unsigned long d3;
- unsigned long a0;
- unsigned long a1;
- unsigned long a2;
- unsigned long a3;
- unsigned long e0;
- unsigned long e1;
- unsigned long e2;
- unsigned long e3;
- unsigned long e4;
- unsigned long e5;
- unsigned long e6;
- unsigned long e7;
- unsigned long lar;
- unsigned long lir;
- unsigned long mdr;
- unsigned long mcvf;
- unsigned long mcrl;
- unsigned long mcrh;
- unsigned long mdrq;
- unsigned long sp;
- unsigned long epsw;
- unsigned long pc;
- struct fpucontext *fpucontext;
- unsigned long oldmask;
-};
-
-
-#endif /* _ASM_SIGCONTEXT_H */
+++ /dev/null
-#include <asm-generic/siginfo.h>
+++ /dev/null
-/* MN10300 Signal definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SIGNAL_H
-#define _ASM_SIGNAL_H
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-#ifdef __KERNEL__
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX (_NSIG-1)
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001U
-#define SA_NOCLDWAIT 0x00000002U
-#define SA_SIGINFO 0x00000004U
-#define SA_ONSTACK 0x08000000U
-#define SA_RESTART 0x10000000U
-#define SA_NODEFER 0x40000000U
-#define SA_RESETHAND 0x80000000U
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- __sigrestore_t sa_restorer;
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-#else
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-typedef struct sigaltstack {
- void __user *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-#include <asm/sigcontext.h>
-
-
-struct pt_regs;
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_SIGNAL_H */
+++ /dev/null
-/* MN10300 SMP support
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SMP_H
-#define _ASM_SMP_H
-
-#ifdef CONFIG_SMP
-#error SMP not yet supported for MN10300
-#endif
-
-#endif
+++ /dev/null
-#ifndef _ASM_SOCKET_H
-#define _ASM_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#define SO_TIMESTAMPING 37
-#define SCM_TIMESTAMPING SO_TIMESTAMPING
-
-#endif /* _ASM_SOCKET_H */
+++ /dev/null
-#ifndef _ASM_SOCKIOS_H
-#define _ASM_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* _ASM_SOCKIOS_H */
+++ /dev/null
-/* MN10300 spinlock support
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SPINLOCK_H
-#define _ASM_SPINLOCK_H
-
-#error SMP spinlocks not implemented for MN10300
-
-#endif /* _ASM_SPINLOCK_H */
+++ /dev/null
-#ifndef _ASM_STAT_H
-#define _ASM_STAT_H
-
-struct __old_kernel_stat {
- unsigned short st_dev;
- unsigned short st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned short st_rdev;
- unsigned long st_size;
- unsigned long st_atime;
- unsigned long st_mtime;
- unsigned long st_ctime;
-};
-
-struct stat {
- unsigned long st_dev;
- unsigned long st_ino;
- unsigned short st_mode;
- unsigned short st_nlink;
- unsigned short st_uid;
- unsigned short st_gid;
- unsigned long st_rdev;
- unsigned long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long st_atime_nsec;
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-/* This matches struct stat64 in glibc2.1, hence the absolutely
- * insane amounts of padding around dev_t's.
- */
-struct stat64 {
- unsigned long long st_dev;
- unsigned char __pad0[4];
-
-#define STAT64_HAS_BROKEN_ST_INO 1
- unsigned long __st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned long st_uid;
- unsigned long st_gid;
-
- unsigned long long st_rdev;
- unsigned char __pad3[4];
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long st_blocks; /* Number 512-byte blocks allocated. */
- unsigned long __pad4; /* future possible st_blocks high bits */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned int st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long long st_ino;
-};
-
-#define STAT_HAVE_NSEC 1
-
-#endif /* _ASM_STAT_H */
+++ /dev/null
-#include <asm-generic/statfs.h>
+++ /dev/null
-/* MN10300 Optimised string functions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Modified by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_STRING_H
-#define _ASM_STRING_H
-
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-
-extern void *memset(void *dest, int ch, size_t count);
-extern void *memcpy(void *dest, const void *src, size_t count);
-extern void *memmove(void *dest, const void *src, size_t count);
-
-
-extern void __struct_cpy_bug(void);
-#define struct_cpy(x, y) \
-({ \
- if (sizeof(*(x)) != sizeof(*(y))) \
- __struct_cpy_bug; \
- memcpy(x, y, sizeof(*(x))); \
-})
-
-#endif /* _ASM_STRING_H */
+++ /dev/null
-/* MN10300 Byte-order primitive construction
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SWAB_H
-#define _ASM_SWAB_H
-
-#include <linux/types.h>
-
-#ifdef __GNUC__
-
-static inline __attribute__((const))
-__u32 __arch_swab32(__u32 x)
-{
- __u32 ret;
- asm("swap %1,%0" : "=r" (ret) : "r" (x));
- return ret;
-}
-#define __arch_swab32 __arch_swab32
-
-static inline __attribute__((const))
-__u16 __arch_swab16(__u16 x)
-{
- __u16 ret;
- asm("swaph %1,%0" : "=r" (ret) : "r" (x));
- return ret;
-}
-#define __arch_swab32 __arch_swab32
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#endif /* _ASM_SWAB_H */
+++ /dev/null
-/* MN10300 System definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_SYSTEM_H
-#define _ASM_SYSTEM_H
-
-#include <asm/cpu-regs.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/kernel.h>
-
-struct task_struct;
-struct thread_struct;
-
-extern asmlinkage
-struct task_struct *__switch_to(struct thread_struct *prev,
- struct thread_struct *next,
- struct task_struct *prev_task);
-
-/* context switching is now performed out-of-line in switch_to.S */
-#define switch_to(prev, next, last) \
-do { \
- current->thread.wchan = (u_long) __builtin_return_address(0); \
- (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \
- mb(); \
- current->thread.wchan = 0; \
-} while (0)
-
-#define arch_align_stack(x) (x)
-
-#define nop() asm volatile ("nop")
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * Force strict CPU ordering.
- * And yes, this is required on UP too when we're talking
- * to devices.
- *
- * For now, "wmb()" doesn't actually do anything, as all
- * Intel CPU's follow what Intel calls a *Processor Order*,
- * in which all writes are seen in the program order even
- * outside the CPU.
- *
- * I expect future Intel CPU's to have a weaker ordering,
- * but I'd also expect them to finally get their act together
- * and add some real memory barriers if so.
- *
- * Some non intel clones support out of order store. wmb() ceases to be a
- * nop for these.
- */
-
-#define mb() asm volatile ("": : :"memory")
-#define rmb() mb()
-#define wmb() asm volatile ("": : :"memory")
-
-#ifdef CONFIG_SMP
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-#else
-#define smp_mb() barrier()
-#define smp_rmb() barrier()
-#define smp_wmb() barrier()
-#endif
-
-#define set_mb(var, value) do { var = value; mb(); } while (0)
-#define set_wmb(var, value) do { var = value; wmb(); } while (0)
-
-#define read_barrier_depends() do {} while (0)
-#define smp_read_barrier_depends() do {} while (0)
-
-/*****************************************************************************/
-/*
- * interrupt control
- * - "disabled": run in IM1/2
- * - level 0 - GDB stub
- * - level 1 - virtual serial DMA (if present)
- * - level 5 - normal interrupt priority
- * - level 6 - timer interrupt
- * - "enabled": run in IM7
- */
-#ifdef CONFIG_MN10300_TTYSM
-#define MN10300_CLI_LEVEL EPSW_IM_2
-#else
-#define MN10300_CLI_LEVEL EPSW_IM_1
-#endif
-
-#define local_save_flags(x) \
-do { \
- typecheck(unsigned long, x); \
- asm volatile( \
- " mov epsw,%0 \n" \
- : "=d"(x) \
- ); \
-} while (0)
-
-#define local_irq_disable() \
-do { \
- asm volatile( \
- " and %0,epsw \n" \
- " or %1,epsw \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- : \
- : "i"(~EPSW_IM), "i"(EPSW_IE | MN10300_CLI_LEVEL) \
- ); \
-} while (0)
-
-#define local_irq_save(x) \
-do { \
- local_save_flags(x); \
- local_irq_disable(); \
-} while (0)
-
-/*
- * we make sure local_irq_enable() doesn't cause priority inversion
- */
-#ifndef __ASSEMBLY__
-
-extern unsigned long __mn10300_irq_enabled_epsw;
-
-#endif
-
-#define local_irq_enable() \
-do { \
- unsigned long tmp; \
- \
- asm volatile( \
- " mov epsw,%0 \n" \
- " and %1,%0 \n" \
- " or %2,%0 \n" \
- " mov %0,epsw \n" \
- : "=&d"(tmp) \
- : "i"(~EPSW_IM), "r"(__mn10300_irq_enabled_epsw) \
- ); \
-} while (0)
-
-#define local_irq_restore(x) \
-do { \
- typecheck(unsigned long, x); \
- asm volatile( \
- " mov %0,epsw \n" \
- " nop \n" \
- " nop \n" \
- " nop \n" \
- : \
- : "d"(x) \
- : "memory", "cc" \
- ); \
-} while (0)
-
-#define irqs_disabled() \
-({ \
- unsigned long flags; \
- local_save_flags(flags); \
- (flags & EPSW_IM) <= MN10300_CLI_LEVEL; \
-})
-
-/* hook to save power by halting the CPU
- * - called from the idle loop
- * - must reenable interrupts (which takes three instruction cycles to complete)
- */
-#define safe_halt() \
-do { \
- asm volatile(" or %0,epsw \n" \
- " nop \n" \
- " nop \n" \
- " bset %2,(%1) \n" \
- : \
- : "i"(EPSW_IE|EPSW_IM), "n"(&CPUM), "i"(CPUM_SLEEP)\
- : "cc" \
- ); \
-} while (0)
-
-#define STI or EPSW_IE|EPSW_IM,epsw
-#define CLI and ~EPSW_IM,epsw; or EPSW_IE|MN10300_CLI_LEVEL,epsw; nop; nop; nop
-
-/*****************************************************************************/
-/*
- * MN10300 doesn't actually have an exchange instruction
- */
-#ifndef __ASSEMBLY__
-
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((struct __xchg_dummy *)(x))
-
-static inline
-unsigned long __xchg(volatile unsigned long *m, unsigned long val)
-{
- unsigned long retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- *m = val;
- local_irq_restore(flags);
- return retval;
-}
-
-#define xchg(ptr, v) \
- ((__typeof__(*(ptr))) __xchg((unsigned long *)(ptr), \
- (unsigned long)(v)))
-
-static inline unsigned long __cmpxchg(volatile unsigned long *m,
- unsigned long old, unsigned long new)
-{
- unsigned long retval;
- unsigned long flags;
-
- local_irq_save(flags);
- retval = *m;
- if (retval == old)
- *m = new;
- local_irq_restore(flags);
- return retval;
-}
-
-#define cmpxchg(ptr, o, n) \
- ((__typeof__(*(ptr))) __cmpxchg((unsigned long *)(ptr), \
- (unsigned long)(o), \
- (unsigned long)(n)))
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_SYSTEM_H */
+++ /dev/null
-#ifndef _ASM_TERMBITS_H
-#define _ASM_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
-#define CTVB 004000000000 /* VisioBraille Terminal flow control */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* _ASM_TERMBITS_H */
+++ /dev/null
-#ifndef _ASM_TERMIOS_H
-#define _ASM_TERMIOS_H
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-#ifdef __KERNEL__
-/* intr=^C quit=^| erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-#endif
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp, &(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) \
- copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) \
- copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) \
- copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) \
- copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* _ASM_TERMIOS_H */
+++ /dev/null
-/* MN10300 Low-level thread information
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_THREAD_INFO_H
-#define _ASM_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#include <asm/page.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/processor.h>
-#endif
-
-#define PREEMPT_ACTIVE 0x10000000
-
-#ifdef CONFIG_4KSTACKS
-#define THREAD_SIZE (4096)
-#else
-#define THREAD_SIZE (8192)
-#endif
-
-#define STACK_WARN (THREAD_SIZE / 8)
-
-/*
- * low level task data that entry.S needs immediate access to
- * - this struct should fit entirely inside of one cache line
- * - this struct shares the supervisor stack pages
- * - if the contents of this structure are changed, the assembly constants
- * must also be changed
- */
-#ifndef __ASSEMBLY__
-
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- __u32 cpu; /* current CPU */
- __s32 preempt_count; /* 0 => preemptable, <0 => BUG */
-
- mm_segment_t addr_limit; /* thread address space:
- 0-0xBFFFFFFF for user-thead
- 0-0xFFFFFFFF for kernel-thread
- */
- struct restart_block restart_block;
-
- __u8 supervisor_stack[0];
-};
-
-#else /* !__ASSEMBLY__ */
-
-#ifndef __ASM_OFFSETS_H__
-#include <asm/asm-offsets.h>
-#endif
-
-#endif
-
-/*
- * macros/functions for gaining access to the thread information structure
- *
- * preempt_count needs to be 1 initially, until the scheduler is functional.
- */
-#ifndef __ASSEMBLY__
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .addr_limit = KERNEL_DS, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-#define init_uregs \
- ((struct pt_regs *) \
- ((unsigned long) init_stack + THREAD_SIZE - sizeof(struct pt_regs)))
-
-extern struct thread_info *__current_ti;
-
-/* how to get the thread information struct from C */
-static inline __attribute__((const))
-struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- asm("mov sp,%0\n"
- "and %1,%0\n"
- : "=d" (ti)
- : "i" (~(THREAD_SIZE - 1))
- : "cc");
- return ti;
-}
-
-/* how to get the current stack pointer from C */
-static inline unsigned long current_stack_pointer(void)
-{
- unsigned long sp;
- asm("mov sp,%0; ":"=r" (sp));
- return sp;
-}
-
-#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
-
-/* thread information allocation */
-#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
-#else
-#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
-#endif
-
-#define free_thread_info(ti) kfree((ti))
-#define get_thread_info(ti) get_task_struct((ti)->task)
-#define put_thread_info(ti) put_task_struct((ti)->task)
-
-#else /* !__ASSEMBLY__ */
-
-#ifndef __VMLINUX_LDS__
-/* how to get the thread information struct from ASM */
-.macro GET_THREAD_INFO reg
- mov sp,\reg
- and -THREAD_SIZE,\reg
-.endm
-#endif
-#endif
-
-/*
- * thread information flags
- * - these are process state flags that various assembly files may need to
- * access
- * - pending work-to-be-done flags are in LSW
- * - other flags in MSW
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
-#define TIF_SIGPENDING 2 /* signal pending */
-#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
-#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */
-#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */
-#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
-#define TIF_MEMDIE 17 /* OOM killer killed process */
-#define TIF_FREEZE 18 /* freezing for suspend */
-
-#define _TIF_SYSCALL_TRACE +(1 << TIF_SYSCALL_TRACE)
-#define _TIF_NOTIFY_RESUME +(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING +(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED +(1 << TIF_NEED_RESCHED)
-#define _TIF_SINGLESTEP +(1 << TIF_SINGLESTEP)
-#define _TIF_RESTORE_SIGMASK +(1 << TIF_RESTORE_SIGMASK)
-#define _TIF_POLLING_NRFLAG +(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE +(1 << TIF_FREEZE)
-
-#define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */
-#define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_THREAD_INFO_H */
+++ /dev/null
-/* AM33v2 on-board timer module registers
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_TIMER_REGS_H
-#define _ASM_TIMER_REGS_H
-
-#include <asm/cpu-regs.h>
-#include <asm/intctl-regs.h>
-
-#ifdef __KERNEL__
-
-/* timer prescalar control */
-#define TMPSCNT __SYSREG(0xd4003071, u8) /* timer prescaler control */
-#define TMPSCNT_ENABLE 0x80 /* timer prescaler enable */
-#define TMPSCNT_DISABLE 0x00 /* timer prescaler disable */
-
-/* 8 bit timers */
-#define TM0MD __SYSREG(0xd4003000, u8) /* timer 0 mode register */
-#define TM0MD_SRC 0x07 /* timer source */
-#define TM0MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM0MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM0MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM0MD_SRC_TM2IO 0x03 /* - TM2IO pin input */
-#define TM0MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM0MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM0MD_SRC_TM0IO 0x07 /* - TM0IO pin input */
-#define TM0MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM0MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM1MD __SYSREG(0xd4003001, u8) /* timer 1 mode register */
-#define TM1MD_SRC 0x07 /* timer source */
-#define TM1MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM1MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM1MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM1MD_SRC_TM0CASCADE 0x03 /* - cascade with timer 0 */
-#define TM1MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM1MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM1MD_SRC_TM1IO 0x07 /* - TM1IO pin input */
-#define TM1MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM1MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM2MD __SYSREG(0xd4003002, u8) /* timer 2 mode register */
-#define TM2MD_SRC 0x07 /* timer source */
-#define TM2MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM2MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM2MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM2MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 1 */
-#define TM2MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM2MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM2MD_SRC_TM2IO 0x07 /* - TM2IO pin input */
-#define TM2MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM2MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM3MD __SYSREG(0xd4003003, u8) /* timer 3 mode register */
-#define TM3MD_SRC 0x07 /* timer source */
-#define TM3MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM3MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM3MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM3MD_SRC_TM1CASCADE 0x03 /* - cascade with timer 2 */
-#define TM3MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM3MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM3MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM3MD_SRC_TM3IO 0x07 /* - TM3IO pin input */
-#define TM3MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM3MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM01MD __SYSREG(0xd4003000, u16) /* timer 0:1 mode register */
-
-#define TM0BR __SYSREG(0xd4003010, u8) /* timer 0 base register */
-#define TM1BR __SYSREG(0xd4003011, u8) /* timer 1 base register */
-#define TM2BR __SYSREG(0xd4003012, u8) /* timer 2 base register */
-#define TM3BR __SYSREG(0xd4003013, u8) /* timer 3 base register */
-#define TM01BR __SYSREG(0xd4003010, u16) /* timer 0:1 base register */
-
-#define TM0BC __SYSREGC(0xd4003020, u8) /* timer 0 binary counter */
-#define TM1BC __SYSREGC(0xd4003021, u8) /* timer 1 binary counter */
-#define TM2BC __SYSREGC(0xd4003022, u8) /* timer 2 binary counter */
-#define TM3BC __SYSREGC(0xd4003023, u8) /* timer 3 binary counter */
-#define TM01BC __SYSREGC(0xd4003020, u16) /* timer 0:1 binary counter */
-
-#define TM0IRQ 2 /* timer 0 IRQ */
-#define TM1IRQ 3 /* timer 1 IRQ */
-#define TM2IRQ 4 /* timer 2 IRQ */
-#define TM3IRQ 5 /* timer 3 IRQ */
-
-#define TM0ICR GxICR(TM0IRQ) /* timer 0 uflow intr ctrl reg */
-#define TM1ICR GxICR(TM1IRQ) /* timer 1 uflow intr ctrl reg */
-#define TM2ICR GxICR(TM2IRQ) /* timer 2 uflow intr ctrl reg */
-#define TM3ICR GxICR(TM3IRQ) /* timer 3 uflow intr ctrl reg */
-
-/* 16-bit timers 4,5 & 7-11 */
-#define TM4MD __SYSREG(0xd4003080, u8) /* timer 4 mode register */
-#define TM4MD_SRC 0x07 /* timer source */
-#define TM4MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM4MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM4MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM4MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM4MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM4MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM4MD_SRC_TM4IO 0x07 /* - TM4IO pin input */
-#define TM4MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM4MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM5MD __SYSREG(0xd4003082, u8) /* timer 5 mode register */
-#define TM5MD_SRC 0x07 /* timer source */
-#define TM5MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM5MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM5MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM5MD_SRC_TM4CASCADE 0x03 /* - cascade with timer 4 */
-#define TM5MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM5MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM5MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM5MD_SRC_TM5IO 0x07 /* - TM5IO pin input */
-#define TM5MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM5MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM7MD __SYSREG(0xd4003086, u8) /* timer 7 mode register */
-#define TM7MD_SRC 0x07 /* timer source */
-#define TM7MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM7MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM7MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM7MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM7MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM7MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM7MD_SRC_TM7IO 0x07 /* - TM7IO pin input */
-#define TM7MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM7MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM8MD __SYSREG(0xd4003088, u8) /* timer 8 mode register */
-#define TM8MD_SRC 0x07 /* timer source */
-#define TM8MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM8MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM8MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM8MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
-#define TM8MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM8MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM8MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM8MD_SRC_TM8IO 0x07 /* - TM8IO pin input */
-#define TM8MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM8MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM9MD __SYSREG(0xd400308a, u8) /* timer 9 mode register */
-#define TM9MD_SRC 0x07 /* timer source */
-#define TM9MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM9MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM9MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM9MD_SRC_TM8CASCADE 0x03 /* - cascade with timer 8 */
-#define TM9MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM9MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM9MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM9MD_SRC_TM9IO 0x07 /* - TM9IO pin input */
-#define TM9MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM9MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM10MD __SYSREG(0xd400308c, u8) /* timer 10 mode register */
-#define TM10MD_SRC 0x07 /* timer source */
-#define TM10MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM10MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM10MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM10MD_SRC_TM9CASCADE 0x03 /* - cascade with timer 9 */
-#define TM10MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM10MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM10MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM10MD_SRC_TM10IO 0x07 /* - TM10IO pin input */
-#define TM10MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM10MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM11MD __SYSREG(0xd400308e, u8) /* timer 11 mode register */
-#define TM11MD_SRC 0x07 /* timer source */
-#define TM11MD_SRC_IOCLK 0x00 /* - IOCLK */
-#define TM11MD_SRC_IOCLK_8 0x01 /* - 1/8 IOCLK */
-#define TM11MD_SRC_IOCLK_32 0x02 /* - 1/32 IOCLK */
-#define TM11MD_SRC_TM7CASCADE 0x03 /* - cascade with timer 7 */
-#define TM11MD_SRC_TM0UFLOW 0x04 /* - timer 0 underflow */
-#define TM11MD_SRC_TM1UFLOW 0x05 /* - timer 1 underflow */
-#define TM11MD_SRC_TM2UFLOW 0x06 /* - timer 2 underflow */
-#define TM11MD_SRC_TM11IO 0x07 /* - TM11IO pin input */
-#define TM11MD_INIT_COUNTER 0x40 /* initialize TMnBC = TMnBR */
-#define TM11MD_COUNT_ENABLE 0x80 /* timer count enable */
-
-#define TM4BR __SYSREG(0xd4003090, u16) /* timer 4 base register */
-#define TM5BR __SYSREG(0xd4003092, u16) /* timer 5 base register */
-#define TM7BR __SYSREG(0xd4003096, u16) /* timer 7 base register */
-#define TM8BR __SYSREG(0xd4003098, u16) /* timer 8 base register */
-#define TM9BR __SYSREG(0xd400309a, u16) /* timer 9 base register */
-#define TM10BR __SYSREG(0xd400309c, u16) /* timer 10 base register */
-#define TM11BR __SYSREG(0xd400309e, u16) /* timer 11 base register */
-#define TM45BR __SYSREG(0xd4003090, u32) /* timer 4:5 base register */
-
-#define TM4BC __SYSREG(0xd40030a0, u16) /* timer 4 binary counter */
-#define TM5BC __SYSREG(0xd40030a2, u16) /* timer 5 binary counter */
-#define TM45BC __SYSREG(0xd40030a0, u32) /* timer 4:5 binary counter */
-
-#define TM7BC __SYSREG(0xd40030a6, u16) /* timer 7 binary counter */
-#define TM8BC __SYSREG(0xd40030a8, u16) /* timer 8 binary counter */
-#define TM9BC __SYSREG(0xd40030aa, u16) /* timer 9 binary counter */
-#define TM10BC __SYSREG(0xd40030ac, u16) /* timer 10 binary counter */
-#define TM11BC __SYSREG(0xd40030ae, u16) /* timer 11 binary counter */
-
-#define TM4IRQ 6 /* timer 4 IRQ */
-#define TM5IRQ 7 /* timer 5 IRQ */
-#define TM7IRQ 11 /* timer 7 IRQ */
-#define TM8IRQ 12 /* timer 8 IRQ */
-#define TM9IRQ 13 /* timer 9 IRQ */
-#define TM10IRQ 14 /* timer 10 IRQ */
-#define TM11IRQ 15 /* timer 11 IRQ */
-
-#define TM4ICR GxICR(TM4IRQ) /* timer 4 uflow intr ctrl reg */
-#define TM5ICR GxICR(TM5IRQ) /* timer 5 uflow intr ctrl reg */
-#define TM7ICR GxICR(TM7IRQ) /* timer 7 uflow intr ctrl reg */
-#define TM8ICR GxICR(TM8IRQ) /* timer 8 uflow intr ctrl reg */
-#define TM9ICR GxICR(TM9IRQ) /* timer 9 uflow intr ctrl reg */
-#define TM10ICR GxICR(TM10IRQ) /* timer 10 uflow intr ctrl reg */
-#define TM11ICR GxICR(TM11IRQ) /* timer 11 uflow intr ctrl reg */
-
-/* 16-bit timer 6 */
-#define TM6MD __SYSREG(0xd4003084, u16) /* timer6 mode register */
-#define TM6MD_SRC 0x0007 /* timer source */
-#define TM6MD_SRC_IOCLK 0x0000 /* - IOCLK */
-#define TM6MD_SRC_IOCLK_8 0x0001 /* - 1/8 IOCLK */
-#define TM6MD_SRC_IOCLK_32 0x0002 /* - 1/32 IOCLK */
-#define TM6MD_SRC_TM0UFLOW 0x0004 /* - timer 0 underflow */
-#define TM6MD_SRC_TM1UFLOW 0x0005 /* - timer 1 underflow */
-#define TM6MD_SRC_TM6IOB_BOTH 0x0006 /* - TM6IOB pin input (both edges) */
-#define TM6MD_SRC_TM6IOB_SINGLE 0x0007 /* - TM6IOB pin input (single edge) */
-#define TM6MD_CLR_ENABLE 0x0010 /* clear count enable */
-#define TM6MD_ONESHOT_ENABLE 0x0040 /* oneshot count */
-#define TM6MD_TRIG_ENABLE 0x0080 /* TM6IOB pin trigger enable */
-#define TM6MD_PWM 0x3800 /* PWM output mode */
-#define TM6MD_PWM_DIS 0x0000 /* - disabled */
-#define TM6MD_PWM_10BIT 0x1000 /* - 10 bits mode */
-#define TM6MD_PWM_11BIT 0x1800 /* - 11 bits mode */
-#define TM6MD_PWM_12BIT 0x3000 /* - 12 bits mode */
-#define TM6MD_PWM_14BIT 0x3800 /* - 14 bits mode */
-#define TM6MD_INIT_COUNTER 0x4000 /* initialize TMnBC to zero */
-#define TM6MD_COUNT_ENABLE 0x8000 /* timer count enable */
-
-#define TM6MDA __SYSREG(0xd40030b4, u8) /* timer6 cmp/cap A mode reg */
-#define TM6MDA_OUT 0x07 /* output select */
-#define TM6MDA_OUT_SETA_RESETB 0x00 /* - set at match A, reset at match B */
-#define TM6MDA_OUT_SETA_RESETOV 0x01 /* - set at match A, reset at overflow */
-#define TM6MDA_OUT_SETA 0x02 /* - set at match A */
-#define TM6MDA_OUT_RESETA 0x03 /* - reset at match A */
-#define TM6MDA_OUT_TOGGLE 0x04 /* - toggle on match A */
-#define TM6MDA_MODE 0xc0 /* compare A register mode */
-#define TM6MDA_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
-#define TM6MDA_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
-#define TM6MDA_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
-#define TM6MDA_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
-#define TM6MDA_EDGE 0x20 /* compare A edge select */
-#define TM6MDA_EDGE_FALLING 0x00 /* capture on falling edge */
-#define TM6MDA_EDGE_RISING 0x20 /* capture on rising edge */
-#define TM6MDA_CAPTURE_ENABLE 0x10 /* capture enable */
-
-#define TM6MDB __SYSREG(0xd40030b5, u8) /* timer6 cmp/cap B mode reg */
-#define TM6MDB_OUT 0x07 /* output select */
-#define TM6MDB_OUT_SETB_RESETA 0x00 /* - set at match B, reset at match A */
-#define TM6MDB_OUT_SETB_RESETOV 0x01 /* - set at match B */
-#define TM6MDB_OUT_RESETB 0x03 /* - reset at match B */
-#define TM6MDB_OUT_TOGGLE 0x04 /* - toggle on match B */
-#define TM6MDB_MODE 0xc0 /* compare B register mode */
-#define TM6MDB_MODE_CMP_SINGLE 0x00 /* - compare, single buffer mode */
-#define TM6MDB_MODE_CMP_DOUBLE 0x40 /* - compare, double buffer mode */
-#define TM6MDB_MODE_CAP_S_EDGE 0x80 /* - capture, single edge mode */
-#define TM6MDB_MODE_CAP_D_EDGE 0xc0 /* - capture, double edge mode */
-#define TM6MDB_EDGE 0x20 /* compare B edge select */
-#define TM6MDB_EDGE_FALLING 0x00 /* capture on falling edge */
-#define TM6MDB_EDGE_RISING 0x20 /* capture on rising edge */
-#define TM6MDB_CAPTURE_ENABLE 0x10 /* capture enable */
-
-#define TM6CA __SYSREG(0xd40030c4, u16) /* timer6 cmp/capture reg A */
-#define TM6CB __SYSREG(0xd40030d4, u16) /* timer6 cmp/capture reg B */
-#define TM6BC __SYSREG(0xd40030a4, u16) /* timer6 binary counter */
-
-#define TM6IRQ 6 /* timer 6 IRQ */
-#define TM6AIRQ 9 /* timer 6A IRQ */
-#define TM6BIRQ 10 /* timer 6B IRQ */
-
-#define TM6ICR GxICR(TM6IRQ) /* timer 6 uflow intr ctrl reg */
-#define TM6AICR GxICR(TM6AIRQ) /* timer 6A intr control reg */
-#define TM6BICR GxICR(TM6BIRQ) /* timer 6B intr control reg */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_TIMER_REGS_H */
+++ /dev/null
-/* MN10300 Architecture time management specifications
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_TIMEX_H
-#define _ASM_TIMEX_H
-
-#include <asm/hardirq.h>
-#include <asm/unit/timex.h>
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ - this should probably be set
- * to something appropriate, but what? */
-
-extern cycles_t cacheflush_time;
-
-#ifdef __KERNEL__
-
-static inline cycles_t get_cycles(void)
-{
- return read_timestamp_counter();
-}
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_TIMEX_H */
+++ /dev/null
-/* MN10300 TLB definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_TLB_H
-#define _ASM_TLB_H
-
-#include <asm/tlbflush.h>
-
-extern void check_pgt_cache(void);
-
-/*
- * we don't need any special per-pte or per-vma handling...
- */
-#define tlb_start_vma(tlb, vma) do { } while (0)
-#define tlb_end_vma(tlb, vma) do { } while (0)
-#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
-
-/*
- * .. because we flush the whole mm when it fills up
- */
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
-
-/* for now, just use the generic stuff */
-#include <asm-generic/tlb.h>
-
-#endif /* _ASM_TLB_H */
+++ /dev/null
-/* MN10300 TLB flushing functions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_TLBFLUSH_H
-#define _ASM_TLBFLUSH_H
-
-#include <asm/processor.h>
-
-#define __flush_tlb() \
-do { \
- int w; \
- __asm__ __volatile__ \
- (" mov %1,%0 \n" \
- " or %2,%0 \n" \
- " mov %0,%1 \n" \
- : "=d"(w) \
- : "m"(MMUCTR), "i"(MMUCTR_IIV|MMUCTR_DIV) \
- : "memory" \
- ); \
-} while (0)
-
-#define __flush_tlb_all() __flush_tlb()
-#define __flush_tlb_one(addr) __flush_tlb()
-
-
-/*
- * TLB flushing:
- *
- * - flush_tlb() flushes the current mm struct TLBs
- * - flush_tlb_all() flushes all processes TLBs
- * - flush_tlb_mm(mm) flushes the specified mm context TLB's
- * - flush_tlb_page(vma, vmaddr) flushes one page
- * - flush_tlb_range(mm, start, end) flushes a range of pages
- * - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
- */
-#define flush_tlb_all() \
-do { \
- preempt_disable(); \
- __flush_tlb_all(); \
- preempt_enable(); \
-} while (0)
-
-#define flush_tlb_mm(mm) \
-do { \
- preempt_disable(); \
- __flush_tlb_all(); \
- preempt_enable(); \
-} while (0)
-
-#define flush_tlb_range(vma, start, end) \
-do { \
- unsigned long __s __attribute__((unused)) = (start); \
- unsigned long __e __attribute__((unused)) = (end); \
- preempt_disable(); \
- __flush_tlb_all(); \
- preempt_enable(); \
-} while (0)
-
-
-#define __flush_tlb_global() flush_tlb_all()
-#define flush_tlb() flush_tlb_all()
-#define flush_tlb_kernel_range(start, end) \
-do { \
- unsigned long __s __attribute__((unused)) = (start); \
- unsigned long __e __attribute__((unused)) = (end); \
- flush_tlb_all(); \
-} while (0)
-
-extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
-
-#define flush_tlb_pgtables(mm, start, end) do {} while (0)
-
-#endif /* _ASM_TLBFLUSH_H */
+++ /dev/null
-#include <asm-generic/topology.h>
+++ /dev/null
-/* MN10300 Basic type definitions
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_TYPES_H
-#define _ASM_TYPES_H
-
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide. */
-typedef u32 dma_addr_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_TYPES_H */
+++ /dev/null
-/* MN10300 userspace access functions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UACCESS_H
-#define _ASM_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/errno.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_XDS MAKE_MM_SEG(0xBFFFFFFF)
-#define KERNEL_DS MAKE_MM_SEG(0x9FFFFFFF)
-#define USER_DS MAKE_MM_SEG(TASK_SIZE)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) \
- ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
-
-/*
- * check that a range of addresses falls within the current address limit
- */
-static inline int ___range_ok(unsigned long addr, unsigned int size)
-{
- int flag = 1, tmp;
-
- asm(" add %3,%1 \n" /* set C-flag if addr + size > 4Gb */
- " bcs 0f \n"
- " cmp %4,%1 \n" /* jump if addr+size>limit (error) */
- " bhi 0f \n"
- " clr %0 \n" /* mark okay */
- "0: \n"
- : "=r"(flag), "=&r"(tmp)
- : "1"(addr), "ir"(size),
- "r"(current_thread_info()->addr_limit.seg), "0"(flag)
- : "cc"
- );
-
- return flag;
-}
-
-#define __range_ok(addr, size) ___range_ok((unsigned long)(addr), (u32)(size))
-
-#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
-#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0)
-
-static inline int verify_area(int type, const void *addr, unsigned long size)
-{
- return access_ok(type, addr, size) ? 0 : -EFAULT;
-}
-
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern int fixup_exception(struct pt_regs *regs);
-
-#define put_user(x, ptr) __put_user_check((x), (ptr), sizeof(*(ptr)))
-#define get_user(x, ptr) __get_user_check((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "__xxx" versions do not do address space checking, useful when
- * doing multiple accesses to the same area (the user has to do the
- * checks by hand with "access_ok()")
- */
-#define __put_user(x, ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __get_user(x, ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-/*
- * The "xxx_ret" versions return constant specified in third argument, if
- * something bad happens. These macros can be optimized for the
- * case of just returning from the function xxx_ret is used.
- */
-
-#define put_user_ret(x, ptr, ret) \
- ({ if (put_user((x), (ptr))) return (ret); })
-#define get_user_ret(x, ptr, ret) \
- ({ if (get_user((x), (ptr))) return (ret); })
-#define __put_user_ret(x, ptr, ret) \
- ({ if (__put_user((x), (ptr))) return (ret); })
-#define __get_user_ret(x, ptr, ret) \
- ({ if (__get_user((x), (ptr))) return (ret); })
-
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct *)(x))
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- __typeof(*(ptr)) __gu_val; \
- unsigned long __gu_addr; \
- int __gu_err; \
- __gu_addr = (unsigned long) (ptr); \
- switch (size) { \
- case 1: __get_user_asm("bu"); break; \
- case 2: __get_user_asm("hu"); break; \
- case 4: __get_user_asm("" ); break; \
- default: __get_user_unknown(); break; \
- } \
- x = (__typeof__(*(ptr))) __gu_val; \
- __gu_err; \
-})
-
-#define __get_user_check(x, ptr, size) \
-({ \
- __typeof__(*(ptr)) __gu_val; \
- unsigned long __gu_addr; \
- int __gu_err; \
- __gu_addr = (unsigned long) (ptr); \
- if (likely(__access_ok(__gu_addr,size))) { \
- switch (size) { \
- case 1: __get_user_asm("bu"); break; \
- case 2: __get_user_asm("hu"); break; \
- case 4: __get_user_asm("" ); break; \
- default: __get_user_unknown(); break; \
- } \
- } \
- else { \
- __gu_err = -EFAULT; \
- __gu_val = 0; \
- } \
- x = (__typeof__(*(ptr))) __gu_val; \
- __gu_err; \
-})
-
-#define __get_user_asm(INSN) \
-({ \
- asm volatile( \
- "1:\n" \
- " mov"INSN" %2,%1\n" \
- " mov 0,%0\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- "3:\n\t" \
- " mov %3,%0\n" \
- " jmp 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b, 3b\n" \
- " .previous" \
- : "=&r" (__gu_err), "=&r" (__gu_val) \
- : "m" (__m(__gu_addr)), "i" (-EFAULT)); \
-})
-
-extern int __get_user_unknown(void);
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- union { \
- __typeof__(*(ptr)) val; \
- u32 bits[2]; \
- } __pu_val; \
- unsigned long __pu_addr; \
- int __pu_err; \
- __pu_val.val = (x); \
- __pu_addr = (unsigned long) (ptr); \
- switch (size) { \
- case 1: __put_user_asm("bu"); break; \
- case 2: __put_user_asm("hu"); break; \
- case 4: __put_user_asm("" ); break; \
- case 8: __put_user_asm8(); break; \
- default: __pu_err = __put_user_unknown(); break; \
- } \
- __pu_err; \
-})
-
-#define __put_user_check(x, ptr, size) \
-({ \
- union { \
- __typeof__(*(ptr)) val; \
- u32 bits[2]; \
- } __pu_val; \
- unsigned long __pu_addr; \
- int __pu_err; \
- __pu_val.val = (x); \
- __pu_addr = (unsigned long) (ptr); \
- if (likely(__access_ok(__pu_addr, size))) { \
- switch (size) { \
- case 1: __put_user_asm("bu"); break; \
- case 2: __put_user_asm("hu"); break; \
- case 4: __put_user_asm("" ); break; \
- case 8: __put_user_asm8(); break; \
- default: __pu_err = __put_user_unknown(); break; \
- } \
- } \
- else { \
- __pu_err = -EFAULT; \
- } \
- __pu_err; \
-})
-
-#define __put_user_asm(INSN) \
-({ \
- asm volatile( \
- "1:\n" \
- " mov"INSN" %1,%2\n" \
- " mov 0,%0\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- "3:\n" \
- " mov %3,%0\n" \
- " jmp 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 1b, 3b\n" \
- " .previous" \
- : "=&r" (__pu_err) \
- : "r" (__pu_val.val), "m" (__m(__pu_addr)), \
- "i" (-EFAULT) \
- ); \
-})
-
-#define __put_user_asm8() \
-({ \
- asm volatile( \
- "1: mov %1,%3 \n" \
- "2: mov %2,%4 \n" \
- " mov 0,%0 \n" \
- "3: \n" \
- " .section .fixup,\"ax\" \n" \
- "4: \n" \
- " mov %5,%0 \n" \
- " jmp 3b \n" \
- " .previous \n" \
- " .section __ex_table,\"a\"\n" \
- " .balign 4 \n" \
- " .long 1b, 4b \n" \
- " .long 2b, 4b \n" \
- " .previous \n" \
- : "=&r" (__pu_err) \
- : "r" (__pu_val.bits[0]), "r" (__pu_val.bits[1]), \
- "m" (__m(__pu_addr)), "m" (__m(__pu_addr+4)), \
- "i" (-EFAULT) \
- ); \
-})
-
-extern int __put_user_unknown(void);
-
-
-/*
- * Copy To/From Userspace
- */
-/* Generic arbitrary sized copy. */
-#define __copy_user(to, from, size) \
-do { \
- if (size) { \
- void *__to = to; \
- const void *__from = from; \
- int w; \
- asm volatile( \
- "0: movbu (%0),%3;\n" \
- "1: movbu %3,(%1);\n" \
- " inc %0;\n" \
- " inc %1;\n" \
- " add -1,%2;\n" \
- " bne 0b;\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- "3: jmp 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,3b\n" \
- " .previous\n" \
- : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
- : "0"(__from), "1"(__to), "2"(size) \
- : "memory"); \
- } \
-} while (0)
-
-#define __copy_user_zeroing(to, from, size) \
-do { \
- if (size) { \
- void *__to = to; \
- const void *__from = from; \
- int w; \
- asm volatile( \
- "0: movbu (%0),%3;\n" \
- "1: movbu %3,(%1);\n" \
- " inc %0;\n" \
- " inc %1;\n" \
- " add -1,%2;\n" \
- " bne 0b;\n" \
- "2:\n" \
- " .section .fixup,\"ax\"\n" \
- "3:\n" \
- " mov %2,%0\n" \
- " clr %3\n" \
- "4: movbu %3,(%1);\n" \
- " inc %1;\n" \
- " add -1,%2;\n" \
- " bne 4b;\n" \
- " mov %0,%2\n" \
- " jmp 2b\n" \
- " .previous\n" \
- " .section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,3b\n" \
- " .previous\n" \
- : "=a"(__from), "=a"(__to), "=r"(size), "=&r"(w)\
- : "0"(__from), "1"(__to), "2"(size) \
- : "memory"); \
- } \
-} while (0)
-
-/* We let the __ versions of copy_from/to_user inline, because they're often
- * used in fast paths and have only a small space overhead.
- */
-static inline
-unsigned long __generic_copy_from_user_nocheck(void *to, const void *from,
- unsigned long n)
-{
- __copy_user_zeroing(to, from, n);
- return n;
-}
-
-static inline
-unsigned long __generic_copy_to_user_nocheck(void *to, const void *from,
- unsigned long n)
-{
- __copy_user(to, from, n);
- return n;
-}
-
-
-#if 0
-#error don't use - these macros don't increment to & from pointers
-/* Optimize just a little bit when we know the size of the move. */
-#define __constant_copy_user(to, from, size) \
-do { \
- asm volatile( \
- " mov %0,a0;\n" \
- "0: movbu (%1),d3;\n" \
- "1: movbu d3,(%2);\n" \
- " add -1,a0;\n" \
- " bne 0b;\n" \
- "2:;" \
- ".section .fixup,\"ax\"\n" \
- "3: jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : \
- : "d"(size), "d"(to), "d"(from) \
- : "d3", "a0"); \
-} while (0)
-
-/* Optimize just a little bit when we know the size of the move. */
-#define __constant_copy_user_zeroing(to, from, size) \
-do { \
- asm volatile( \
- " mov %0,a0;\n" \
- "0: movbu (%1),d3;\n" \
- "1: movbu d3,(%2);\n" \
- " add -1,a0;\n" \
- " bne 0b;\n" \
- "2:;" \
- ".section .fixup,\"ax\"\n" \
- "3: jmp 2b\n" \
- ".previous\n" \
- ".section __ex_table,\"a\"\n" \
- " .balign 4\n" \
- " .long 0b,3b\n" \
- " .long 1b,3b\n" \
- ".previous" \
- : \
- : "d"(size), "d"(to), "d"(from) \
- : "d3", "a0"); \
-} while (0)
-
-static inline
-unsigned long __constant_copy_to_user(void *to, const void *from,
- unsigned long n)
-{
- if (access_ok(VERIFY_WRITE, to, n))
- __constant_copy_user(to, from, n);
- return n;
-}
-
-static inline
-unsigned long __constant_copy_from_user(void *to, const void *from,
- unsigned long n)
-{
- if (access_ok(VERIFY_READ, from, n))
- __constant_copy_user_zeroing(to, from, n);
- return n;
-}
-
-static inline
-unsigned long __constant_copy_to_user_nocheck(void *to, const void *from,
- unsigned long n)
-{
- __constant_copy_user(to, from, n);
- return n;
-}
-
-static inline
-unsigned long __constant_copy_from_user_nocheck(void *to, const void *from,
- unsigned long n)
-{
- __constant_copy_user_zeroing(to, from, n);
- return n;
-}
-#endif
-
-extern unsigned long __generic_copy_to_user(void __user *, const void *,
- unsigned long);
-extern unsigned long __generic_copy_from_user(void *, const void __user *,
- unsigned long);
-
-#define __copy_to_user_inatomic(to, from, n) \
- __generic_copy_to_user_nocheck((to), (from), (n))
-#define __copy_from_user_inatomic(to, from, n) \
- __generic_copy_from_user_nocheck((to), (from), (n))
-
-#define __copy_to_user(to, from, n) \
-({ \
- might_sleep(); \
- __copy_to_user_inatomic((to), (from), (n)); \
-})
-
-#define __copy_from_user(to, from, n) \
-({ \
- might_sleep(); \
- __copy_from_user_inatomic((to), (from), (n)); \
-})
-
-
-#define copy_to_user(to, from, n) __generic_copy_to_user((to), (from), (n))
-#define copy_from_user(to, from, n) __generic_copy_from_user((to), (from), (n))
-
-extern long strncpy_from_user(char *dst, const char __user *src, long count);
-extern long __strncpy_from_user(char *dst, const char __user *src, long count);
-extern long strnlen_user(const char __user *str, long n);
-#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
-extern unsigned long clear_user(void __user *mem, unsigned long len);
-extern unsigned long __clear_user(void __user *mem, unsigned long len);
-
-#endif /* _ASM_UACCESS_H */
+++ /dev/null
-/* MN10300 User context
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UCONTEXT_H
-#define _ASM_UCONTEXT_H
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* _ASM_UCONTEXT_H */
+++ /dev/null
-/* MN10300 Unaligned memory access handling
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_MN10300_UNALIGNED_H
-#define _ASM_MN10300_UNALIGNED_H
-
-#include <linux/unaligned/access_ok.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_le
-#define put_unaligned __put_unaligned_le
-
-#endif /* _ASM_MN10300_UNALIGNED_H */
+++ /dev/null
-/* MN10300 System call number list
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNISTD_H
-#define _ASM_UNISTD_H
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_lchown 16
-#define __NR_break 17
-#define __NR_oldstat 18
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_oldfstat 28
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_mpx 56
-#define __NR_setpgid 57
-#define __NR_ulimit 58
-#define __NR_oldolduname 59
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_oldlstat 84
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_ioperm 101
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_olduname 109
-#define __NR_iopl 110
-#define __NR_vhangup 111
-#define __NR_idle 112
-#define __NR_vm86old 113
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_modify_ldt 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR__newselect 142
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_vm86 166
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread64 180
-#define __NR_pwrite64 181
-#define __NR_chown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_lchown32 198
-#define __NR_getuid32 199
-#define __NR_getgid32 200
-#define __NR_geteuid32 201
-#define __NR_getegid32 202
-#define __NR_setreuid32 203
-#define __NR_setregid32 204
-#define __NR_getgroups32 205
-#define __NR_setgroups32 206
-#define __NR_fchown32 207
-#define __NR_setresuid32 208
-#define __NR_getresuid32 209
-#define __NR_setresgid32 210
-#define __NR_getresgid32 211
-#define __NR_chown32 212
-#define __NR_setuid32 213
-#define __NR_setgid32 214
-#define __NR_setfsuid32 215
-#define __NR_setfsgid32 216
-#define __NR_pivot_root 217
-#define __NR_mincore 218
-#define __NR_madvise 219
-#define __NR_madvise1 219 /* delete when C lib stub is removed */
-#define __NR_getdents64 220
-#define __NR_fcntl64 221
-/* 223 is unused */
-#define __NR_gettid 224
-#define __NR_readahead 225
-#define __NR_setxattr 226
-#define __NR_lsetxattr 227
-#define __NR_fsetxattr 228
-#define __NR_getxattr 229
-#define __NR_lgetxattr 230
-#define __NR_fgetxattr 231
-#define __NR_listxattr 232
-#define __NR_llistxattr 233
-#define __NR_flistxattr 234
-#define __NR_removexattr 235
-#define __NR_lremovexattr 236
-#define __NR_fremovexattr 237
-#define __NR_tkill 238
-#define __NR_sendfile64 239
-#define __NR_futex 240
-#define __NR_sched_setaffinity 241
-#define __NR_sched_getaffinity 242
-#define __NR_set_thread_area 243
-#define __NR_get_thread_area 244
-#define __NR_io_setup 245
-#define __NR_io_destroy 246
-#define __NR_io_getevents 247
-#define __NR_io_submit 248
-#define __NR_io_cancel 249
-#define __NR_fadvise64 250
-
-#define __NR_exit_group 252
-#define __NR_lookup_dcookie 253
-#define __NR_epoll_create 254
-#define __NR_epoll_ctl 255
-#define __NR_epoll_wait 256
-#define __NR_remap_file_pages 257
-#define __NR_set_tid_address 258
-#define __NR_timer_create 259
-#define __NR_timer_settime (__NR_timer_create+1)
-#define __NR_timer_gettime (__NR_timer_create+2)
-#define __NR_timer_getoverrun (__NR_timer_create+3)
-#define __NR_timer_delete (__NR_timer_create+4)
-#define __NR_clock_settime (__NR_timer_create+5)
-#define __NR_clock_gettime (__NR_timer_create+6)
-#define __NR_clock_getres (__NR_timer_create+7)
-#define __NR_clock_nanosleep (__NR_timer_create+8)
-#define __NR_statfs64 268
-#define __NR_fstatfs64 269
-#define __NR_tgkill 270
-#define __NR_utimes 271
-#define __NR_fadvise64_64 272
-#define __NR_vserver 273
-#define __NR_mbind 274
-#define __NR_get_mempolicy 275
-#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
-#define __NR_mq_unlink (__NR_mq_open+1)
-#define __NR_mq_timedsend (__NR_mq_open+2)
-#define __NR_mq_timedreceive (__NR_mq_open+3)
-#define __NR_mq_notify (__NR_mq_open+4)
-#define __NR_mq_getsetattr (__NR_mq_open+5)
-#define __NR_kexec_load 283
-#define __NR_waitid 284
-#define __NR_add_key 286
-#define __NR_request_key 287
-#define __NR_keyctl 288
-#define __NR_cacheflush 289
-#define __NR_ioprio_set 290
-#define __NR_ioprio_get 291
-#define __NR_inotify_init 292
-#define __NR_inotify_add_watch 293
-#define __NR_inotify_rm_watch 294
-#define __NR_migrate_pages 295
-#define __NR_openat 296
-#define __NR_mkdirat 297
-#define __NR_mknodat 298
-#define __NR_fchownat 299
-#define __NR_futimesat 300
-#define __NR_fstatat64 301
-#define __NR_unlinkat 302
-#define __NR_renameat 303
-#define __NR_linkat 304
-#define __NR_symlinkat 305
-#define __NR_readlinkat 306
-#define __NR_fchmodat 307
-#define __NR_faccessat 308
-#define __NR_pselect6 309
-#define __NR_ppoll 310
-#define __NR_unshare 311
-#define __NR_set_robust_list 312
-#define __NR_get_robust_list 313
-#define __NR_splice 314
-#define __NR_sync_file_range 315
-#define __NR_tee 316
-#define __NR_vmsplice 317
-#define __NR_move_pages 318
-#define __NR_getcpu 319
-#define __NR_epoll_pwait 320
-#define __NR_utimensat 321
-#define __NR_signalfd 322
-#define __NR_timerfd_create 323
-#define __NR_eventfd 324
-#define __NR_fallocate 325
-#define __NR_timerfd_settime 326
-#define __NR_timerfd_gettime 327
-#define __NR_signalfd4 328
-#define __NR_eventfd2 329
-#define __NR_epoll_create1 330
-#define __NR_dup3 331
-#define __NR_pipe2 332
-#define __NR_inotify_init1 333
-
-#ifdef __KERNEL__
-
-#define NR_syscalls 326
-
-/*
- * specify the deprecated syscalls we want to support on this arch
- */
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_OLD_STAT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLD_GETRLIMIT
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-#define __ARCH_WANT_SYS_RT_SIGSUSPEND
-
-/*
- * "Conditional" syscalls
- *
- * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
- * but it doesn't work on all toolchains, so we just do it by hand
- */
-#ifndef cond_syscall
-#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_UNISTD_H */
+++ /dev/null
-/* ASB2303-specific clocks
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_CLOCK_H
-#define _ASM_UNIT_CLOCK_H
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_MN10300_RTC
-
-extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
-extern unsigned long mn10300_iobclk;
-extern unsigned long mn10300_tsc_per_HZ;
-
-#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
-/* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
-
-#else /* !CONFIG_MN10300_RTC */
-
-#define MN10300_IOCLK 33333333UL
-/* #define MN10300_IOBCLK 66666666UL */
-
-#endif /* !CONFIG_MN10300_RTC */
-
-#define MN10300_JCCLK MN10300_IOCLK
-#define MN10300_TSCCLK MN10300_IOCLK
-
-#ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
-#else /* !CONFIG_MN10300_RTC */
-#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
-#endif /* !CONFIG_MN10300_RTC */
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_CLOCK_H */
+++ /dev/null
-/* ASB2303-specific LEDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_LEDS_H
-#define _ASM_UNIT_LEDS_H
-
-#include <asm/pio-regs.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-
-#define ASB2303_GPIO0DEF __SYSREG(0xDB000000, u32)
-#define ASB2303_7SEGLEDS __SYSREG(0xDB000008, u32)
-
-/*
- * use the 7-segment LEDs to indicate states
- */
-
-/* flip the 7-segment LEDs between "G" and "-" */
-#define mn10300_set_gdbleds(ONOFF) \
-do { \
- ASB2303_7SEGLEDS = (ONOFF) ? 0x85 : 0x7f; \
-} while (0)
-
-/* indicate double-fault by displaying "d" on the LEDs */
-#define mn10300_set_dbfleds \
- mov 0x43,d0 ; \
- movbu d0,(ASB2303_7SEGLEDS)
-
-#ifndef __ASSEMBLY__
-extern void peripheral_leds_display_exception(enum exception_code code);
-extern void peripheral_leds_led_chase(void);
-extern void debug_to_serial(const char *p, int n);
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_LEDS_H */
+++ /dev/null
-/* ASB2303-specific 8250 serial ports
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_SERIAL_H
-#define _ASM_UNIT_SERIAL_H
-
-#include <asm/cpu-regs.h>
-#include <asm/proc/irq.h>
-#include <linux/serial_reg.h>
-
-#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
-#define SERIAL_PORT1_BASE_ADDRESS 0xA6FC0000
-
-#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
-
-/*
- * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports
- */
-#ifndef CONFIG_GDBSTUB_ON_TTYSx
-
-#define SERIAL_PORT_DFNS \
- { \
- .baud_base = BASE_BAUD, \
- .irq = SERIAL_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM, \
- }, \
- { \
- .baud_base = BASE_BAUD, \
- .irq = SERIAL_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = (u8 *) SERIAL_PORT1_BASE_ADDRESS, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM, \
- },
-
-#ifndef __ASSEMBLY__
-
-static inline void __debug_to_serial(const char *p, int n)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#else /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#define SERIAL_PORT_DFNS /* both stolen by gdb-stub because they share an IRQ */
-
-#if defined(CONFIG_GDBSTUB_ON_TTYS0)
-#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
-#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
-#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
-#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
-
-#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
-#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_RX * 4, u8)
-#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_TX * 4, u8)
-#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT1_BASE_ADDRESS + UART_SCR * 4, u8)
-#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define LSR_WAIT_FOR(STATE) \
-do { \
- while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) {} \
-} while (0)
-#define FLOWCTL_WAIT_FOR(LINE) \
-do { \
- while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) {} \
-} while (0)
-#define FLOWCTL_CLEAR(LINE) \
-do { \
- GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_SET(LINE) \
-do { \
- GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_QUERY(LINE) ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; })
-
-static inline void __debug_to_serial(const char *p, int n)
-{
- char ch;
-
- FLOWCTL_SET(DTR);
-
- for (; n > 0; n--) {
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
-
- ch = *p++;
- if (ch == 0x0a) {
- GDBPORT_SERIAL_TX = 0x0d;
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
- }
- GDBPORT_SERIAL_TX = ch;
- }
-
- FLOWCTL_CLEAR(DTR);
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#endif /* _ASM_UNIT_SERIAL_H */
+++ /dev/null
-/* Support for the SMC91C111 NIC on an ASB2303
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_SMC91111_H
-#define _ASM_UNIT_SMC91111_H
-
-#include <asm/intctl-regs.h>
-
-#define SMC91111_BASE 0xAA000300UL
-#define SMC91111_BASE_END 0xAA000400UL
-#define SMC91111_IRQ XIRQ3
-
-#define SMC_CAN_USE_8BIT 0
-#define SMC_CAN_USE_16BIT 1
-#define SMC_CAN_USE_32BIT 0
-#define SMC_NOWAIT 1
-#define SMC_IRQ_FLAGS (0)
-
-#if SMC_CAN_USE_8BIT
-#define SMC_inb(a, r) inb((unsigned long) ((a) + (r)))
-#define SMC_outb(v, a, r) outb(v, (unsigned long) ((a) + (r)))
-#endif
-
-#if SMC_CAN_USE_16BIT
-#define SMC_inw(a, r) inw((unsigned long) ((a) + (r)))
-#define SMC_outw(v, a, r) outw(v, (unsigned long) ((a) + (r)))
-#define SMC_insw(a, r, p, l) insw((unsigned long) ((a) + (r)), (p), (l))
-#define SMC_outsw(a, r, p, l) outsw((unsigned long) ((a) + (r)), (p), (l))
-#endif
-
-#if SMC_CAN_USE_32BIT
-#define SMC_inl(a, r) inl((unsigned long) ((a) + (r)))
-#define SMC_outl(v, a, r) outl(v, (unsigned long) ((a) + (r)))
-#define SMC_insl(a, r, p, l) insl((unsigned long) ((a) + (r)), (p), (l))
-#define SMC_outsl(a, r, p, l) outsl((unsigned long) ((a) + (r)), (p), (l))
-#endif
-
-#define RPC_LSA_DEFAULT RPC_LED_100_10
-#define RPC_LSB_DEFAULT RPC_LED_TX_RX
-
-#define set_irq_type(irq, type)
-
-#endif /* _ASM_UNIT_SMC91111_H */
+++ /dev/null
-/* ASB2303-specific timer specifcations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_TIMEX_H
-#define _ASM_UNIT_TIMEX_H
-
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
-#include <asm/timer-regs.h>
-#include <asm/unit/clock.h>
-
-/*
- * jiffies counter specifications
- */
-
-#define TMJCBR_MAX 0xffff
-#define TMJCBC TM01BC
-
-#define TMJCMD TM01MD
-#define TMJCBR TM01BR
-#define TMJCIRQ TM1IRQ
-#define TMJCICR TM1ICR
-#define TMJCICR_LEVEL GxICR_LEVEL_5
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_jiffies_counter(void)
-{
- unsigned rate;
- u16 md, t16;
-
- /* use as little prescaling as possible to avoid losing accuracy */
- md = TM0MD_SRC_IOCLK;
- rate = MN10300_JCCLK / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_8;
- rate = MN10300_JCCLK / 8 / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_32;
- rate = MN10300_JCCLK / 32 / HZ;
-
- if (rate > TMJCBR_MAX)
- BUG();
- }
- }
-
- TMJCBR = rate - 1;
- t16 = TMJCBR;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_INIT_COUNTER |
- TM1MD_INIT_COUNTER << 8;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_COUNT_ENABLE |
- TM1MD_COUNT_ENABLE << 8;
-
- t16 = TMJCMD;
-
- TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- t16 = TMJCICR;
-}
-
-static inline void shutdown_jiffies_counter(void)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-
-/*
- * timestamp counter specifications
- */
-
-#define TMTSCBR_MAX 0xffffffff
-#define TMTSCBC TM45BC
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_timestamp_counter(void)
-{
- /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
- * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
- */
- TM45BR = TMTSCBR_MAX;
-
- TM4MD = TM4MD_SRC_IOCLK;
- TM4MD |= TM4MD_INIT_COUNTER;
- TM4MD &= ~TM4MD_INIT_COUNTER;
- TM4ICR = 0;
-
- TM5MD = TM5MD_SRC_TM4CASCADE;
- TM5MD |= TM5MD_INIT_COUNTER;
- TM5MD &= ~TM5MD_INIT_COUNTER;
- TM5ICR = 0;
-
- TM5MD |= TM5MD_COUNT_ENABLE;
- TM4MD |= TM4MD_COUNT_ENABLE;
-}
-
-static inline void shutdown_timestamp_counter(void)
-{
- TM4MD = 0;
- TM5MD = 0;
-}
-
-/*
- * we use a cascaded pair of 16-bit down-counting timers to count I/O
- * clock cycles for the purposes of time keeping
- */
-typedef unsigned long cycles_t;
-
-static inline cycles_t read_timestamp_counter(void)
-{
- return (cycles_t)TMTSCBC;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_TIMEX_H */
+++ /dev/null
-/* ASB2305-specific clocks
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_CLOCK_H
-#define _ASM_UNIT_CLOCK_H
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_MN10300_RTC
-
-extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
-extern unsigned long mn10300_iobclk;
-extern unsigned long mn10300_tsc_per_HZ;
-
-#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
-/* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
-
-#else /* !CONFIG_MN10300_RTC */
-
-#define MN10300_IOCLK 33333333UL
-/* #define MN10300_IOBCLK 66666666UL */
-
-#endif /* !CONFIG_MN10300_RTC */
-
-#define MN10300_JCCLK MN10300_IOCLK
-#define MN10300_TSCCLK MN10300_IOCLK
-
-#ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
-#else /* !CONFIG_MN10300_RTC */
-#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
-#endif /* !CONFIG_MN10300_RTC */
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_CLOCK_H */
+++ /dev/null
-/* ASB2305-specific LEDs
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_UNIT_LEDS_H
-#define _ASM_UNIT_LEDS_H
-
-#include <asm/pio-regs.h>
-#include <asm/cpu-regs.h>
-#include <asm/exceptions.h>
-
-#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
-
-/* perform a hard reset by driving PIO06 low */
-#define mn10300_unit_hard_reset() \
-do { \
- P0OUT &= 0xbf; \
- P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
-} while (0)
-
-/*
- * use the 7-segment LEDs to indicate states
- */
-/* indicate double-fault by displaying "db-f" on the LEDs */
-#define mn10300_set_dbfleds \
- mov 0x43077f1d,d0 ; \
- mov d0,(ASB2305_7SEGLEDS)
-
-/* flip the 7-segment LEDs between "Gdb-" and "----" */
-#define mn10300_set_gdbleds(ONOFF) \
-do { \
- ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
-} while (0)
-
-#ifndef __ASSEMBLY__
-extern void peripheral_leds_display_exception(enum exception_code);
-extern void peripheral_leds_led_chase(void);
-extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
-extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
-extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
-extern void peripheral_leds7x4_display_rtc(void);
-#endif /* __ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_LEDS_H */
+++ /dev/null
-/* ASB2305-specific 8250 serial ports
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_SERIAL_H
-#define _ASM_UNIT_SERIAL_H
-
-#include <asm/cpu/cpu-regs.h>
-#include <asm/proc/irq.h>
-#include <linux/serial_reg.h>
-
-#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
-#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
-
-#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
-
-/*
- * dispose of the /dev/ttyS0 serial port
- */
-#ifndef CONFIG_GDBSTUB_ON_TTYSx
-
-#define SERIAL_PORT_DFNS \
- { \
- .baud_base = BASE_BAUD, \
- .irq = SERIAL_IRQ, \
- .flags = STD_COM_FLAGS, \
- .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM, \
- },
-
-#ifndef __ASSEMBLY__
-
-static inline void __debug_to_serial(const char *p, int n)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#else /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
-
-#if defined(CONFIG_GDBSTUB_ON_TTYS0)
-#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
-#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
-#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
-#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
-#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
-#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
-#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
-#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
-#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
-#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
-
-#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
-#error The ASB2305 doesnt have a /dev/ttyS1
-#endif
-
-#ifndef __ASSEMBLY__
-
-#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
-#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
-#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
-#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
-
-#define LSR_WAIT_FOR(STATE) \
-do { \
- while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
-} while (0)
-#define FLOWCTL_WAIT_FOR(LINE) \
-do { \
- while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
-} while (0)
-#define FLOWCTL_CLEAR(LINE) \
-do { \
- TTYS0_MCR &= ~UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_SET(LINE) \
-do { \
- TTYS0_MCR |= UART_MCR_##LINE; \
-} while (0)
-#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
-
-static inline void __debug_to_serial(const char *p, int n)
-{
- char ch;
-
- FLOWCTL_SET(DTR);
-
- for (; n > 0; n--) {
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
-
- ch = *p++;
- if (ch == 0x0a) {
- TTYS0_TX = 0x0d;
- LSR_WAIT_FOR(THRE);
- FLOWCTL_WAIT_FOR(CTS);
- }
- TTYS0_TX = ch;
- }
-
- FLOWCTL_CLEAR(DTR);
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* CONFIG_GDBSTUB_ON_TTYSx */
-
-#endif /* _ASM_UNIT_SERIAL_H */
+++ /dev/null
-/* ASB2305 timer specifcations
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_UNIT_TIMEX_H
-#define _ASM_UNIT_TIMEX_H
-
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
-#include <asm/cpu/timer-regs.h>
-#include <asm/unit/clock.h>
-
-/*
- * jiffies counter specifications
- */
-
-#define TMJCBR_MAX 0xffff
-#define TMJCBC TM01BC
-
-#define TMJCMD TM01MD
-#define TMJCBR TM01BR
-#define TMJCIRQ TM1IRQ
-#define TMJCICR TM1ICR
-#define TMJCICR_LEVEL GxICR_LEVEL_5
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_jiffies_counter(void)
-{
- unsigned rate;
- u16 md, t16;
-
- /* use as little prescaling as possible to avoid losing accuracy */
- md = TM0MD_SRC_IOCLK;
- rate = MN10300_JCCLK / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_8;
- rate = MN10300_JCCLK / 8 / HZ;
-
- if (rate > TMJCBR_MAX) {
- md = TM0MD_SRC_IOCLK_32;
- rate = MN10300_JCCLK / 32 / HZ;
-
- if (rate > TMJCBR_MAX)
- BUG();
- }
- }
-
- TMJCBR = rate - 1;
- t16 = TMJCBR;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_INIT_COUNTER |
- TM1MD_INIT_COUNTER << 8;
-
- TMJCMD =
- md |
- TM1MD_SRC_TM0CASCADE << 8 |
- TM0MD_COUNT_ENABLE |
- TM1MD_COUNT_ENABLE << 8;
-
- t16 = TMJCMD;
-
- TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- t16 = TMJCICR;
-}
-
-static inline void shutdown_jiffies_counter(void)
-{
-}
-
-#endif /* !__ASSEMBLY__ */
-
-
-/*
- * timestamp counter specifications
- */
-
-#define TMTSCBR_MAX 0xffffffff
-#define TMTSCBC TM45BC
-
-#ifndef __ASSEMBLY__
-
-static inline void startup_timestamp_counter(void)
-{
- /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
- * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
- */
- TM45BR = TMTSCBR_MAX;
-
- TM4MD = TM4MD_SRC_IOCLK;
- TM4MD |= TM4MD_INIT_COUNTER;
- TM4MD &= ~TM4MD_INIT_COUNTER;
- TM4ICR = 0;
-
- TM5MD = TM5MD_SRC_TM4CASCADE;
- TM5MD |= TM5MD_INIT_COUNTER;
- TM5MD &= ~TM5MD_INIT_COUNTER;
- TM5ICR = 0;
-
- TM5MD |= TM5MD_COUNT_ENABLE;
- TM4MD |= TM4MD_COUNT_ENABLE;
-}
-
-static inline void shutdown_timestamp_counter(void)
-{
- TM4MD = 0;
- TM5MD = 0;
-}
-
-/*
- * we use a cascaded pair of 16-bit down-counting timers to count I/O
- * clock cycles for the purposes of time keeping
- */
-typedef unsigned long cycles_t;
-
-static inline cycles_t read_timestamp_counter(void)
-{
- return (cycles_t) TMTSCBC;
-}
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASM_UNIT_TIMEX_H */
+++ /dev/null
-/* MN10300 User process data
- *
- * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#ifndef _ASM_USER_H
-#define _ASM_USER_H
-
-#include <asm/page.h>
-#include <linux/ptrace.h>
-
-#ifndef __ASSEMBLY__
-/*
- * When the kernel dumps core, it starts by dumping the user struct - this will
- * be used by gdb to figure out where the data and stack segments are within
- * the file, and what virtual addresses to use.
- */
-struct user {
- /* We start with the registers, to mimic the way that "memory" is
- * returned from the ptrace(3,...) function.
- */
- struct pt_regs regs; /* Where the registers are actually stored */
-
- /* The rest of this junk is to help gdb figure out what goes where */
- unsigned long int u_tsize; /* Text segment size (pages). */
- unsigned long int u_dsize; /* Data segment size (pages). */
- unsigned long int u_ssize; /* Stack segment size (pages). */
- unsigned long start_code; /* Starting virtual address of text. */
- unsigned long start_stack; /* Starting virtual address of stack area.
- This is actually the bottom of the stack,
- the top of the stack is always found in the
- esp register. */
- long int signal; /* Signal that caused the core dump. */
- int reserved; /* No longer used */
- struct user_pt_regs *u_ar0; /* Used by gdb to help find the values for */
-
- /* the registers */
- unsigned long magic; /* To uniquely identify a core file */
- char u_comm[32]; /* User command that was responsible */
-};
-#endif
-
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR +(u.start_code)
-#define HOST_STACK_END_ADDR +(u.start_stack + u.u_ssize * NBPG)
-
-#endif /* _ASM_USER_H */
+++ /dev/null
-/* MN10300 VGA register definitions
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_VGA_H
-#define _ASM_VGA_H
-
-
-
-#endif /* _ASM_VGA_H */
+++ /dev/null
-#include <asm-generic/xor.h>
{
return kcalloc(nmemb, size, GFP_KERNEL);
}
+
+static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
+{
+ u8 *addr;
+
+ if (size <= PAGE_SIZE)
+ return kcalloc(nmemb, size, GFP_KERNEL);
+
+ addr = vmalloc(nmemb * size);
+ if (!addr)
+ return NULL;
+
+ memset(addr, 0, nmemb * size);
+
+ return addr;
+}
+
+static __inline void drm_free_large(void *ptr)
+{
+ if (!is_vmalloc_addr(ptr))
+ return kfree(ptr);
+
+ vfree(ptr);
+}
#else
extern void *drm_alloc(size_t size, int area);
extern void drm_free(void *pt, size_t size, int area);
u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY];
uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY];
+ /* requested DPMS state */
+ int dpms;
+
void *helper_private;
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
struct drm_framebuffer *old_fb);
extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc);
+extern void drm_helper_connector_dpms(struct drm_connector *connector, int mode);
+
extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
struct drm_mode_fb_cmd *mode_cmd);
{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
#define gamma_PCI_IDS \
{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0, 0, 0}
#define DRM_I915_GEM_GET_TILING 0x22
#define DRM_I915_GEM_GET_APERTURE 0x23
#define DRM_I915_GEM_MMAP_GTT 0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
#define I915_BIT_6_SWIZZLE_9_10_11 4
/* Not seen by userland */
#define I915_BIT_6_SWIZZLE_UNKNOWN 5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17 6
+#define I915_BIT_6_SWIZZLE_9_10_17 7
struct drm_i915_gem_set_tiling {
/** Handle of the buffer to have its tiling state updated */
__u64 aper_available_size;
};
+struct drm_i915_get_pipe_from_crtc_id {
+ /** ID of CRTC being requested **/
+ __u32 crtc_id;
+
+ /** pipe of requested CRTC **/
+ __u32 pipe;
+};
+
#endif /* _I915_DRM_H_ */
header-y += radeonfb.h
header-y += raw.h
header-y += resource.h
+header-y += romfs_fs.h
header-y += rose.h
header-y += serial_reg.h
header-y += smbno.h
unifdef-y += reboot.h
unifdef-y += reiserfs_fs.h
unifdef-y += reiserfs_xattr.h
-unifdef-y += romfs_fs.h
unifdef-y += route.h
unifdef-y += rtc.h
unifdef-y += rtnetlink.h
int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
void acpi_irq_stats_init(void);
extern u32 acpi_irq_handled;
+extern u32 acpi_irq_not_handled;
extern struct acpi_mcfg_allocation *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
extern int sbf_port;
extern unsigned long acpi_realmode_flags;
-int acpi_register_gsi (u32 gsi, int triggering, int polarity);
+int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
#ifdef CONFIG_X86_IO_APIC
struct amba_driver {
struct device_driver drv;
- int (*probe)(struct amba_device *, void *);
+ int (*probe)(struct amba_device *, struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
int (*suspend)(struct amba_device *, pm_message_t);
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
#ifndef __ASSEMBLY__
+struct amba_device; /* in uncompress this is included but amba/bus.h is not */
struct amba_pl010_data {
void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
};
return 0;
}
+static inline int ata_id_form_factor(const u16 *id)
+{
+ u16 val = id[168];
+
+ if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+ return 0;
+
+ val &= 0xf;
+
+ if (val > 5)
+ return 0;
+
+ return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+ u16 val = id[217];
+
+ if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+ return 0;
+
+ if (val > 1 && val < 0x401)
+ return 0;
+
+ return val;
+}
+
static inline int ata_id_has_trim(const u16 *id)
{
if (ata_id_major_version(id) >= 7 &&
#ifndef _LINUX_AUTO_FS_H
#define _LINUX_AUTO_FS_H
+#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/limits.h>
-#include <linux/types.h>
#include <linux/ioctl.h>
#else
-#include <asm/types.h>
#include <sys/ioctl.h>
#endif /* __KERNEL__ */
int hasvdso;
};
-extern int register_binfmt(struct linux_binfmt *);
+extern int __register_binfmt(struct linux_binfmt *fmt, int insert);
+
+/* Registration of default binfmt handlers */
+static inline int register_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 0);
+}
+/* Same as above, but adds a new binfmt at the top of the list */
+static inline int insert_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 1);
+}
+
extern void unregister_binfmt(struct linux_binfmt *);
extern int prepare_binprm(struct linux_binprm *);
* top 4 bits of bio flags indicate the pool this bio came from
*/
#define BIO_POOL_BITS (4)
+#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
return bio && bio->bi_io_vec != NULL;
}
+/*
+ * BIO list managment for use by remapping drivers (e.g. DM or MD).
+ *
+ * A bio_list anchors a singly-linked list of bios chained through the bi_next
+ * member of the bio. The bio_list also caches the last list member to allow
+ * fast access to the tail.
+ */
+struct bio_list {
+ struct bio *head;
+ struct bio *tail;
+};
+
+static inline int bio_list_empty(const struct bio_list *bl)
+{
+ return bl->head == NULL;
+}
+
+static inline void bio_list_init(struct bio_list *bl)
+{
+ bl->head = bl->tail = NULL;
+}
+
+#define bio_list_for_each(bio, bl) \
+ for (bio = (bl)->head; bio; bio = bio->bi_next)
+
+static inline unsigned bio_list_size(const struct bio_list *bl)
+{
+ unsigned sz = 0;
+ struct bio *bio;
+
+ bio_list_for_each(bio, bl)
+ sz++;
+
+ return sz;
+}
+
+static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
+{
+ bio->bi_next = NULL;
+
+ if (bl->tail)
+ bl->tail->bi_next = bio;
+ else
+ bl->head = bio;
+
+ bl->tail = bio;
+}
+
+static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
+{
+ bio->bi_next = bl->head;
+
+ bl->head = bio;
+
+ if (!bl->tail)
+ bl->tail = bio;
+}
+
+static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->tail)
+ bl->tail->bi_next = bl2->head;
+ else
+ bl->head = bl2->head;
+
+ bl->tail = bl2->tail;
+}
+
+static inline void bio_list_merge_head(struct bio_list *bl,
+ struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->head)
+ bl2->tail->bi_next = bl->head;
+ else
+ bl->tail = bl2->tail;
+
+ bl->head = bl2->head;
+}
+
+static inline struct bio *bio_list_pop(struct bio_list *bl)
+{
+ struct bio *bio = bl->head;
+
+ if (bio) {
+ bl->head = bl->head->bi_next;
+ if (!bl->head)
+ bl->tail = NULL;
+
+ bio->bi_next = NULL;
+ }
+
+ return bio;
+}
+
+static inline struct bio *bio_list_get(struct bio_list *bl)
+{
+ struct bio *bio = bl->head;
+
+ bl->head = bl->tail = NULL;
+
+ return bio;
+}
+
#if defined(CONFIG_BLK_DEV_INTEGRITY)
#define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)]))
return fls64(l);
}
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+ if (((u32)word) == 0UL)
+ return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+ return __ffs((unsigned long)word);
+}
+
#ifdef __KERNEL__
#ifdef CONFIG_GENERIC_FIND_FIRST_BIT
__REQ_COPY_USER, /* contains copies of user pages */
__REQ_INTEGRITY, /* integrity metadata has been remapped */
__REQ_NOIDLE, /* Don't anticipate more IO after this one */
+ __REQ_IO_STAT, /* account I/O stat */
__REQ_NR_BITS, /* stops here */
};
#define REQ_COPY_USER (1 << __REQ_COPY_USER)
#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
#define REQ_NOIDLE (1 << __REQ_NOIDLE)
+#define REQ_IO_STAT (1 << __REQ_IO_STAT)
#define BLK_MAX_CDB 16
blk_failfast_transport(rq) || \
blk_failfast_driver(rq))
#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
+#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT)
+#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET)
#define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq)))
unsigned long b_state);
void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
/* Things to do with buffers at mapping->private_list */
void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
void block_invalidatepage(struct page *page, unsigned long offset);
int block_write_full_page(struct page *page, get_block_t *get_block,
struct writeback_control *wbc);
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc, bh_end_io_t *handler);
int block_read_full_page(struct page*, get_block_t*);
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from);
#define CAP_FOR_EACH_U32(__capi) \
for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
+/*
+ * CAP_FS_MASK and CAP_NFSD_MASKS:
+ *
+ * The fs mask is all the privileges that fsuid==0 historically meant.
+ * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE.
+ *
+ * It has never meant setting security.* and trusted.* xattrs.
+ *
+ * We could also define fsmask as follows:
+ * 1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions
+ * 2. The security.* and trusted.* xattrs are fs-related MAC permissions
+ */
+
# define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \
+ | CAP_TO_MASK(CAP_MKNOD) \
| CAP_TO_MASK(CAP_DAC_OVERRIDE) \
| CAP_TO_MASK(CAP_DAC_READ_SEARCH) \
| CAP_TO_MASK(CAP_FOWNER) \
# define CAP_EMPTY_SET ((kernel_cap_t){{ 0, 0 }})
# define CAP_FULL_SET ((kernel_cap_t){{ ~0, ~0 }})
# define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }})
-# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } })
+# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \
+ | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \
+ CAP_FS_MASK_B1 } })
# define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \
- | CAP_TO_MASK(CAP_SYS_RESOURCE) \
- | CAP_TO_MASK(CAP_MKNOD), \
- CAP_FS_MASK_B1 } })
+ | CAP_TO_MASK(CAP_SYS_RESOURCE), \
+ CAP_FS_MASK_B1 } })
#endif /* _KERNEL_CAPABILITY_U32S != 2 */
* 400-499: Perfect
* The ideal clocksource. A must-use where
* available.
- * @read: returns a cycle value
+ * @read: returns a cycle value, passes clocksource as argument
+ * @enable: optional function to enable the clocksource
+ * @disable: optional function to disable the clocksource
* @mask: bitmask for two's complement
* subtraction of non 64 bit counters
* @mult: cycle to nanosecond multiplier (adjusted by NTP)
char *name;
struct list_head list;
int rating;
- cycle_t (*read)(void);
+ cycle_t (*read)(struct clocksource *cs);
+ int (*enable)(struct clocksource *cs);
+ void (*disable)(struct clocksource *cs);
cycle_t mask;
u32 mult;
u32 mult_orig;
*/
static inline cycle_t clocksource_read(struct clocksource *cs)
{
- return cs->read();
+ return cs->read(cs);
+}
+
+/**
+ * clocksource_enable: - enable clocksource
+ * @cs: pointer to clocksource
+ *
+ * Enables the specified clocksource. The clocksource callback
+ * function should start up the hardware and setup mult and field
+ * members of struct clocksource to reflect hardware capabilities.
+ */
+static inline int clocksource_enable(struct clocksource *cs)
+{
+ return cs->enable ? cs->enable(cs) : 0;
+}
+
+/**
+ * clocksource_disable: - disable clocksource
+ * @cs: pointer to clocksource
+ *
+ * Disables the specified clocksource. The clocksource callback
+ * function should power down the now unused hardware block to
+ * save power.
+ */
+static inline void clocksource_disable(struct clocksource *cs)
+{
+ if (cs->disable)
+ cs->disable(cs);
}
/**
bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
void alloc_bootmem_cpumask_var(cpumask_var_t *mask);
void free_cpumask_var(cpumask_var_t mask);
void free_bootmem_cpumask_var(cpumask_var_t mask);
return true;
}
+static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+ cpumask_clear(*mask);
+ return true;
+}
+
+static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
+ int node)
+{
+ cpumask_clear(*mask);
+ return true;
+}
+
static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask)
{
}
#define _LINUX_CRED_H
#include <linux/capability.h>
+#include <linux/init.h>
#include <linux/key.h>
#include <asm/atomic.h>
#define __LINUX_DEBUG_LOCKING_H
#include <linux/kernel.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
struct task_struct;
extern int debug_locks;
extern int debug_locks_silent;
+
+static inline int __debug_locks_off(void)
+{
+ return xchg(&debug_locks, 0);
+}
+
/*
* Generic 'turn off all lock debugging' function:
*/
/*
* Target features
*/
-#define DM_TARGET_SUPPORTS_BARRIERS 0x00000001
struct target_type {
uint64_t features;
struct device_driver *driver; /* which driver has allocated this
device */
void *driver_data; /* data private to the driver */
-
- void *platform_data; /* We will remove platform_data
- field if all platform devices
- pass its platform specific data
- from platform_device->platform_data,
- other kind of devices should not
- use platform_data. */
+ void *platform_data; /* Platform specific data, device
+ core doesn't touch it */
struct dev_pm_info power;
#ifdef CONFIG_NUMA
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);
+extern void wait_for_device_probe(void);
/* drivers/base/power/shutdown.c */
extern void device_shutdown(void);
* dependency chains
* @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
* @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
+ * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
+ * (if not set, do the source dma-unmapping as page)
+ * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
+ * (if not set, do the destination dma-unmapping as page)
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
DMA_CTRL_ACK = (1 << 1),
DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
+ DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
+ DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
};
/**
};
#ifdef CONFIG_INTR_REMAP
extern int intr_remapping_enabled;
+extern int intr_remapping_supported(void);
extern int enable_intr_remapping(int);
extern void disable_intr_remapping(void);
extern int reenable_intr_remapping(int);
}
#define irq_remapped(irq) (0)
#define enable_intr_remapping(mode) (-1)
+#define disable_intr_remapping() (0)
+#define reenable_intr_remapping(mode) (0)
#define intr_remapping_enabled (0)
#endif
DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \
if (__dynamic_dbg_enabled(descriptor)) \
dev_printk(KERN_DEBUG, dev, \
- KBUILD_MODNAME ": " pr_fmt(fmt),\
+ KBUILD_MODNAME ": " fmt, \
##__VA_ARGS__); \
} while (0)
/* Interpretation of offset for color fields: All offsets are from the right,
* inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
* can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified. This implies
- * big-endian byte order if bits_per_pixel is greater than 8.
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
*/
struct fb_bitfield {
__u32 offset; /* beginning of bitfield */
#ifndef _LINUX_FIEMAP_H
#define _LINUX_FIEMAP_H
+#include <linux/types.h>
+
struct fiemap_extent {
__u64 fe_logical; /* logical offset in bytes for the start of
* the extent from the beginning of the file */
*/
#define FMODE_NOCMTIME ((__force fmode_t)2048)
+/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ * The block layer uses device plugging to defer IO a little bit, in
+ * the hope that we will see more IO very shortly. This increases
+ * coalescing of adjacent IO and thus reduces the number of IOs we
+ * have to send to the device. It also allows for better queuing,
+ * if the IO isn't mergeable. If the caller is going to be waiting
+ * for the IO, then he must ensure that the device is unplugged so
+ * that the IO is dispatched to the driver.
+ *
+ * All IO is handled async in Linux. This is fine for background
+ * writes, but for reads or writes that someone waits for completion
+ * on, we want to notify the block layer and IO scheduler so that they
+ * know about it. That allows them to make better scheduling
+ * decisions. So when the below references 'sync' and 'async', it
+ * is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ A normal read operation. Device will be plugged.
+ * READ_SYNC A synchronous read. Device is not plugged, caller can
+ * immediately wait on this read without caring about
+ * unplugging.
+ * READA Used for read-ahead operations. Lower priority, and the
+ * block layer could (in theory) choose to ignore this
+ * request if it runs into resource problems.
+ * WRITE A normal async write. Device will be plugged.
+ * SWRITE Like WRITE, but a special case for ll_rw_block() that
+ * tells it to lock the buffer first. Normally a buffer
+ * must be locked before doing IO.
+ * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down
+ * the hint that someone will be waiting on this IO
+ * shortly. The device must still be unplugged explicitly,
+ * WRITE_SYNC_PLUG does not do this as we could be
+ * submitting more writes before we actually wait on any
+ * of them.
+ * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device
+ * immediately after submission. The write equivalent
+ * of READ_SYNC.
+ * WRITE_ODIRECT Special case write for O_DIRECT only.
+ * SWRITE_SYNC
+ * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
+ * See SWRITE.
+ * WRITE_BARRIER Like WRITE, but tells the block layer that all
+ * previously submitted writes must be safely on storage
+ * before this one is started. Also guarantees that when
+ * this write is complete, it itself is also safely on
+ * storage. Prevents reordering of writes on both sides
+ * of this IO.
+ *
+ */
#define RW_MASK 1
#define RWA_MASK 2
#define READ 0
(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
#define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
+
+/*
+ * These aren't really reads or writes, they pass down information about
+ * parts of device that are now unused by the file system.
+ */
#define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
#define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
I_MUTEX_QUOTA
};
-extern void inode_double_lock(struct inode *inode1, struct inode *inode2);
-extern void inode_double_unlock(struct inode *inode1, struct inode *inode2);
-
/*
* NOTE: in a 32bit arch with a preemptable kernel and
* an UP compile the i_size_read/write must be atomic
void kill_anon_super(struct super_block *sb);
void kill_litter_super(struct super_block *sb);
void deactivate_super(struct super_block *sb);
+void deactivate_locked_super(struct super_block *sb);
int set_anon_super(struct super_block *s, void *data);
struct super_block *sget(struct file_system_type *type,
int (*test)(struct super_block *,void *),
extern void free_write_pipe(struct file *);
extern struct file *do_filp_open(int dfd, const char *pathname,
- int open_flag, int mode);
+ int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
struct pipe_inode_info *, size_t, unsigned int);
extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *,
- struct file *, loff_t *, size_t, unsigned int);
extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
struct file *out, loff_t *, size_t len, unsigned int flags);
extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
extern int vfs_stat(char __user *, struct kstat *);
extern int vfs_lstat(char __user *, struct kstat *);
-extern int vfs_stat_fd(int dfd, char __user *, struct kstat *);
-extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *);
extern int vfs_fstat(unsigned int, struct kstat *);
+extern int vfs_fstatat(int , char __user *, struct kstat *, int);
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt);
extern void save_mount_options(struct super_block *sb, char *options);
+extern void replace_mount_options(struct super_block *sb, char *options);
static inline ino_t parent_ino(struct dentry *dentry)
{
int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
-int get_filesystem_list(char * buf);
+int __init get_filesystem_list(char *buf);
#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
*
*/
-/* Flags related to I2C device features */
-#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
-#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
+
+ /* Legacy hooks, used by mpc52xx_psc_spi driver. */
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
};
struct mpc8xx_pcmcia_ops {
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
/* for init task */
-#define INIT_FTRACE_GRAPH .ret_stack = NULL
+#define INIT_FTRACE_GRAPH .ret_stack = NULL,
/*
* Stack of return addresses for functions
#endif /* CONFIG_HW_BRANCH_TRACER */
-/*
- * A syscall entry in the ftrace syscalls array.
- *
- * @name: name of the syscall
- * @nb_args: number of parameters it takes
- * @types: list of types as strings
- * @args: list of args as strings (args[i] matches types[i])
- */
-struct syscall_metadata {
- const char *name;
- int nb_args;
- const char **types;
- const char **args;
-};
-
-#ifdef CONFIG_FTRACE_SYSCALLS
-extern void arch_init_ftrace_syscalls(void);
-extern struct syscall_metadata *syscall_nr_to_meta(int nr);
-extern void start_ftrace_syscalls(void);
-extern void stop_ftrace_syscalls(void);
-extern void ftrace_syscall_enter(struct pt_regs *regs);
-extern void ftrace_syscall_exit(struct pt_regs *regs);
-#else
-static inline void start_ftrace_syscalls(void) { }
-static inline void stop_ftrace_syscalls(void) { }
-static inline void ftrace_syscall_enter(struct pt_regs *regs) { }
-static inline void ftrace_syscall_exit(struct pt_regs *regs) { }
-#endif
-
#endif /* _LINUX_FTRACE_H */
#define DISK_PITER_REVERSE (1 << 0) /* iterate in the reverse direction */
#define DISK_PITER_INCL_EMPTY (1 << 1) /* include 0-sized parts */
#define DISK_PITER_INCL_PART0 (1 << 2) /* include partition 0 */
+#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
struct disk_part_iter {
struct gendisk *disk;
* are provided using conventional syntax.
*/
#define I2C_BOARD_INFO(dev_type, dev_addr) \
- .type = (dev_type), .addr = (dev_addr)
+ .type = dev_type, .addr = (dev_addr)
/* Add-on boards should register/unregister their devices; e.g. a board
struct fbd_ioat {
unsigned int vendor;
unsigned int ioat_dev;
+ unsigned int enabled;
};
/*
* The i5000 chip-set has the same hooks as the i7300
- * but support is disabled by default because this driver
- * has not been validated on that platform.
+ * but it is not enabled by default and must be manually
+ * manually enabled with "forceload=1" because it is
+ * only lightly validated.
*/
-#define SUPPORT_I5000 0
static const struct fbd_ioat fbd_ioat_list[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
-#if SUPPORT_I5000
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
-#endif
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
{0, 0}
};
/* table of devices that work with this driver */
static const struct pci_device_id pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-#if SUPPORT_I5000
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-#endif
{ } /* Terminating entry */
};
/* Check for known platforms with I/O-AT */
static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
- struct pci_dev **ioat_dev)
+ struct pci_dev **ioat_dev,
+ int enable_all)
{
int i;
struct pci_dev *memdev, *dmadev;
for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
if (dmadev->vendor == fbd_ioat_list[i].vendor &&
dmadev->device == fbd_ioat_list[i].ioat_dev) {
+ if (!(fbd_ioat_list[i].enabled || enable_all))
+ continue;
if (fbd_dev)
*fbd_dev = memdev;
if (ioat_dev)
ide_started, /* a drive operation was started, handler was set */
} ide_startstop_t;
+enum {
+ IDE_VALID_ERROR = (1 << 1),
+ IDE_VALID_FEATURE = IDE_VALID_ERROR,
+ IDE_VALID_NSECT = (1 << 2),
+ IDE_VALID_LBAL = (1 << 3),
+ IDE_VALID_LBAM = (1 << 4),
+ IDE_VALID_LBAH = (1 << 5),
+ IDE_VALID_DEVICE = (1 << 6),
+ IDE_VALID_LBA = IDE_VALID_LBAL |
+ IDE_VALID_LBAM |
+ IDE_VALID_LBAH,
+ IDE_VALID_OUT_TF = IDE_VALID_FEATURE |
+ IDE_VALID_NSECT |
+ IDE_VALID_LBA,
+ IDE_VALID_IN_TF = IDE_VALID_NSECT |
+ IDE_VALID_LBA,
+ IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF,
+ IDE_VALID_IN_HOB = IDE_VALID_ERROR |
+ IDE_VALID_NSECT |
+ IDE_VALID_LBA,
+};
+
enum {
IDE_TFLAG_LBA48 = (1 << 0),
- IDE_TFLAG_OUT_HOB_FEATURE = (1 << 1),
- IDE_TFLAG_OUT_HOB_NSECT = (1 << 2),
- IDE_TFLAG_OUT_HOB_LBAL = (1 << 3),
- IDE_TFLAG_OUT_HOB_LBAM = (1 << 4),
- IDE_TFLAG_OUT_HOB_LBAH = (1 << 5),
- IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE |
- IDE_TFLAG_OUT_HOB_NSECT |
- IDE_TFLAG_OUT_HOB_LBAL |
- IDE_TFLAG_OUT_HOB_LBAM |
- IDE_TFLAG_OUT_HOB_LBAH,
- IDE_TFLAG_OUT_FEATURE = (1 << 6),
- IDE_TFLAG_OUT_NSECT = (1 << 7),
- IDE_TFLAG_OUT_LBAL = (1 << 8),
- IDE_TFLAG_OUT_LBAM = (1 << 9),
- IDE_TFLAG_OUT_LBAH = (1 << 10),
- IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE |
- IDE_TFLAG_OUT_NSECT |
- IDE_TFLAG_OUT_LBAL |
- IDE_TFLAG_OUT_LBAM |
- IDE_TFLAG_OUT_LBAH,
- IDE_TFLAG_OUT_DEVICE = (1 << 11),
- IDE_TFLAG_WRITE = (1 << 12),
- IDE_TFLAG_CUSTOM_HANDLER = (1 << 13),
- IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 14),
- IDE_TFLAG_IN_HOB_ERROR = (1 << 15),
- IDE_TFLAG_IN_HOB_NSECT = (1 << 16),
- IDE_TFLAG_IN_HOB_LBAL = (1 << 17),
- IDE_TFLAG_IN_HOB_LBAM = (1 << 18),
- IDE_TFLAG_IN_HOB_LBAH = (1 << 19),
- IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL |
- IDE_TFLAG_IN_HOB_LBAM |
- IDE_TFLAG_IN_HOB_LBAH,
- IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_ERROR |
- IDE_TFLAG_IN_HOB_NSECT |
- IDE_TFLAG_IN_HOB_LBA,
- IDE_TFLAG_IN_ERROR = (1 << 20),
- IDE_TFLAG_IN_NSECT = (1 << 21),
- IDE_TFLAG_IN_LBAL = (1 << 22),
- IDE_TFLAG_IN_LBAM = (1 << 23),
- IDE_TFLAG_IN_LBAH = (1 << 24),
- IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL |
- IDE_TFLAG_IN_LBAM |
- IDE_TFLAG_IN_LBAH,
- IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT |
- IDE_TFLAG_IN_LBA,
- IDE_TFLAG_IN_DEVICE = (1 << 25),
- IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB |
- IDE_TFLAG_IN_HOB,
- IDE_TFLAG_TF = IDE_TFLAG_OUT_TF |
- IDE_TFLAG_IN_TF,
- IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE |
- IDE_TFLAG_IN_DEVICE,
+ IDE_TFLAG_WRITE = (1 << 1),
+ IDE_TFLAG_CUSTOM_HANDLER = (1 << 2),
+ IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3),
/* force 16-bit I/O operations */
- IDE_TFLAG_IO_16BIT = (1 << 26),
+ IDE_TFLAG_IO_16BIT = (1 << 4),
/* struct ide_cmd was allocated using kmalloc() */
- IDE_TFLAG_DYN = (1 << 27),
- IDE_TFLAG_FS = (1 << 28),
- IDE_TFLAG_MULTI_PIO = (1 << 29),
+ IDE_TFLAG_DYN = (1 << 5),
+ IDE_TFLAG_FS = (1 << 6),
+ IDE_TFLAG_MULTI_PIO = (1 << 7),
};
enum {
};
struct ide_taskfile {
- u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */
- /* 1-5: additional data to support LBA48 */
- union {
- u8 hob_error; /* read: error */
- u8 hob_feature; /* write: feature */
- };
-
- u8 hob_nsect;
- u8 hob_lbal;
- u8 hob_lbam;
- u8 hob_lbah;
-
- u8 data; /* 6: low data byte (for TASKFILE IOCTL) */
-
- union { /* Â 7: */
- u8 error; /* read: error */
- u8 feature; /* write: feature */
+ u8 data; /* 0: data byte (for TASKFILE ioctl) */
+ union { /* 1: */
+ u8 error; /* read: error */
+ u8 feature; /* write: feature */
};
-
- u8 nsect; /* 8: number of sectors */
- u8 lbal; /* 9: LBA low */
- u8 lbam; /* 10: LBA mid */
- u8 lbah; /* 11: LBA high */
-
- u8 device; /* 12: device select */
-
- union { /* 13: */
- u8 status; /*  read: status  */
+ u8 nsect; /* 2: number of sectors */
+ u8 lbal; /* 3: LBA low */
+ u8 lbam; /* 4: LBA mid */
+ u8 lbah; /* 5: LBA high */
+ u8 device; /* 6: device select */
+ union { /* 7: */
+ u8 status; /* read: status */
u8 command; /* write: command */
};
};
struct ide_cmd {
- union {
- struct ide_taskfile tf;
- u8 tf_array[14];
- };
+ struct ide_taskfile tf;
+ struct ide_taskfile hob;
+ struct {
+ struct {
+ u8 tf;
+ u8 hob;
+ } out, in;
+ } valid;
+
+ u8 tf_flags;
u8 ftf_flags; /* for TASKFILE ioctl */
- u32 tf_flags;
int protocol;
int sg_nents; /* number of sg entries */
void (*write_devctl)(struct hwif_s *, u8);
void (*dev_select)(ide_drive_t *);
- void (*tf_load)(ide_drive_t *, struct ide_cmd *);
- void (*tf_read)(ide_drive_t *, struct ide_cmd *);
+ void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
+ void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
void (*input_data)(ide_drive_t *, struct ide_cmd *,
void *, unsigned int);
extern void ide_fixstring(u8 *, const int, const int);
-int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
+int ide_busy_sleep(ide_drive_t *, unsigned long, int);
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
int ide_complete_rq(ide_drive_t *, int, unsigned int);
-void ide_tf_dump(const char *, struct ide_taskfile *);
+void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
+void ide_tf_dump(const char *, struct ide_cmd *);
void ide_exec_command(ide_hwif_t *, u8);
u8 ide_read_status(ide_hwif_t *);
void ide_write_devctl(ide_hwif_t *, u8);
void ide_dev_select(ide_drive_t *);
-void ide_tf_load(ide_drive_t *, struct ide_cmd *);
-void ide_tf_read(ide_drive_t *, struct ide_cmd *);
+void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
+void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
extern void ide_toggle_bounce(ide_drive_t *drive, int on);
-u64 ide_get_lba_addr(struct ide_taskfile *, int);
+u64 ide_get_lba_addr(struct ide_cmd *, int);
u8 ide_dump_status(ide_drive_t *, const char *, u8);
struct ide_timing {
#define _LINUX_INIT_H
#include <linux/compiler.h>
+#include <linux/section-names.h>
+#include <linux/stringify.h>
/* These macros are used to mark some functions or
* initialized data (doesn't apply to uninitialized data)
#define __refdata __section(.ref.data)
#define __refconst __section(.ref.rodata)
-/* backward compatibility note
- * A few places hardcode the old section names:
- * .text.init.refok
- * .data.init.refok
- * .exit.text.refok
- * They should be converted to use the defines from this file
- */
-
/* compatibility defines */
#define __init_refok __ref
#define __initdata_refok __refdata
#define __memexitconst __section(.memexit.rodata)
/* For assembly routines */
-#define __HEAD .section ".head.text","ax"
+#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax"
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
/* Relies on boot_command_line being set */
void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
#endif /* __ASSEMBLY__ */
/**
extern struct files_struct init_files;
extern struct fs_struct init_fs;
-#define INIT_KIOCTX(name, which_mm) \
-{ \
- .users = ATOMIC_INIT(1), \
- .dead = 0, \
- .mm = &which_mm, \
- .user_id = 0, \
- .next = NULL, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
- .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \
- .reqs_active = 0U, \
- .max_reqs = ~0U, \
-}
-
#define INIT_MM(name) \
{ \
.mm_rb = RB_ROOT, \
#define SYN_REPORT 0
#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
/*
* Keys and buttons
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
+
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
+
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
#define BUS_GSC 0x1A
#define BUS_ATARI 0x1B
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+
/*
* Values describing the status of a force-feedback effect
*/
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
+static inline void input_mt_sync(struct input_dev *dev)
+{
+ input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
extern int early_irq_init(void);
extern int arch_probe_nr_irqs(void);
extern int arch_early_irq_init(void);
-extern int arch_init_chip_data(struct irq_desc *desc, int cpu);
+extern int arch_init_chip_data(struct irq_desc *desc, int node);
#endif
response. When you send a
response message, this will
be returned. */
+#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
+
/* Note that async events and received commands do not have a completion
code as the first byte of the incoming data, unlike a response. */
#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
#define IPMI_GET_CHANNEL_INFO_CMD 0x42
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR 0x01
+#define IPMI_BMC_EVT_MSG_INTR 0x02
+#define IPMI_BMC_EVT_MSG_BUFF 0x04
+#define IPMI_BMC_SYS_LOG 0x08
+
#define IPMI_NETFN_STORAGE_REQUEST 0x0a
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
#define IPMI_ADD_SEL_ENTRY_CMD 0x44
#define IPMI_CHANNEL_MEDIUM_USB1 10
#define IPMI_CHANNEL_MEDIUM_USB2 11
#define IPMI_CHANNEL_MEDIUM_SYSINTF 12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f
#endif /* __LINUX_IPMI_MSGDEFS_H */
void (*eoi)(unsigned int irq);
void (*end)(unsigned int irq);
- void (*set_affinity)(unsigned int irq,
+ int (*set_affinity)(unsigned int irq,
const struct cpumask *dest);
int (*retrigger)(unsigned int irq);
int (*set_type)(unsigned int irq, unsigned int flow_type);
spinlock_t lock;
#ifdef CONFIG_SMP
cpumask_var_t affinity;
- unsigned int cpu;
+ unsigned int node;
#ifdef CONFIG_GENERIC_PENDING_IRQ
cpumask_var_t pending_mask;
#endif
} ____cacheline_internodealigned_in_smp;
extern void arch_init_copy_chip_data(struct irq_desc *old_desc,
- struct irq_desc *desc, int cpu);
+ struct irq_desc *desc, int node);
extern void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc);
#ifndef CONFIG_SPARSE_IRQ
extern struct irq_desc irq_desc[NR_IRQS];
-#else /* CONFIG_SPARSE_IRQ */
-extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int cpu);
-#endif /* CONFIG_SPARSE_IRQ */
-
-extern struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu);
+#endif
-static inline struct irq_desc *
-irq_remap_to_desc(unsigned int irq, struct irq_desc *desc)
-{
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- return irq_to_desc(irq);
+#ifdef CONFIG_NUMA_IRQ_DESC
+extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int node);
#else
+static inline struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
+{
return desc;
-#endif
}
+#endif
+
+extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node);
/*
* Migration helpers for obsolete names, they will go away:
extern void set_irq_probe(unsigned int irq);
/* Handle dynamic irq creation and destruction */
-extern unsigned int create_irq_nr(unsigned int irq_want);
+extern unsigned int create_irq_nr(unsigned int irq_want, int node);
extern int create_irq(void);
extern void destroy_irq(unsigned int irq);
#ifdef CONFIG_SMP
/**
- * init_alloc_desc_masks - allocate cpumasks for irq_desc
+ * alloc_desc_masks - allocate cpumasks for irq_desc
* @desc: pointer to irq_desc struct
* @cpu: cpu which will be handling the cpumasks
* @boot: true if need bootmem
*
* Allocates affinity and pending_mask cpumask if required.
* Returns true if successful (or not required).
- * Side effect: affinity has all bits set, pending_mask has all bits clear.
*/
-static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
+static inline bool alloc_desc_masks(struct irq_desc *desc, int node,
bool boot)
{
- int node;
-
+#ifdef CONFIG_CPUMASK_OFFSTACK
if (boot) {
alloc_bootmem_cpumask_var(&desc->affinity);
- cpumask_setall(desc->affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
alloc_bootmem_cpumask_var(&desc->pending_mask);
- cpumask_clear(desc->pending_mask);
#endif
return true;
}
- node = cpu_to_node(cpu);
-
if (!alloc_cpumask_var_node(&desc->affinity, GFP_ATOMIC, node))
return false;
- cpumask_setall(desc->affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (!alloc_cpumask_var_node(&desc->pending_mask, GFP_ATOMIC, node)) {
free_cpumask_var(desc->affinity);
return false;
}
- cpumask_clear(desc->pending_mask);
+#endif
#endif
return true;
}
+static inline void init_desc_masks(struct irq_desc *desc)
+{
+ cpumask_setall(desc->affinity);
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+ cpumask_clear(desc->pending_mask);
+#endif
+}
+
/**
* init_copy_desc_masks - copy cpumasks for irq_desc
* @old_desc: pointer to old irq_desc struct
static inline void init_copy_desc_masks(struct irq_desc *old_desc,
struct irq_desc *new_desc)
{
-#ifdef CONFIG_CPUMASKS_OFFSTACK
+#ifdef CONFIG_CPUMASK_OFFSTACK
cpumask_copy(new_desc->affinity, old_desc->affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
#endif
}
+static inline void free_desc_masks(struct irq_desc *old_desc,
+ struct irq_desc *new_desc)
+{
+ free_cpumask_var(old_desc->affinity);
+
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+ free_cpumask_var(old_desc->pending_mask);
+#endif
+}
+
#else /* !CONFIG_SMP */
-static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
+static inline bool alloc_desc_masks(struct irq_desc *desc, int node,
bool boot)
{
return true;
}
+static inline void init_desc_masks(struct irq_desc *desc)
+{
+}
+
static inline void init_copy_desc_masks(struct irq_desc *old_desc,
struct irq_desc *new_desc)
{
}
+static inline void free_desc_masks(struct irq_desc *old_desc,
+ struct irq_desc *new_desc)
+{
+}
#endif /* CONFIG_SMP */
#endif /* _LINUX_IRQ_H */
extern int journal_revoke (handle_t *,
unsigned long, struct buffer_head *);
extern int journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void journal_write_revoke_records(journal_t *, transaction_t *);
+extern void journal_write_revoke_records(journal_t *,
+ transaction_t *, int);
/* Recovery revoke support */
extern int journal_set_revoke(journal_t *, unsigned long, tid_t);
extern void jbd2_journal_destroy_revoke(journal_t *);
extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void jbd2_journal_write_revoke_records(journal_t *, transaction_t *);
+extern void jbd2_journal_write_revoke_records(journal_t *,
+ transaction_t *, int);
/* Recovery revoke support */
extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
#define request_module(mod...) __request_module(true, mod)
#define request_module_nowait(mod...) __request_module(false, mod)
#define try_then_request_module(x, mod...) \
- ((x) ?: (__request_module(false, mod), (x)))
+ ((x) ?: (__request_module(true, mod), (x)))
#else
static inline int request_module(const char *name, ...) { return -ENOSYS; }
static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; }
#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
#define KVM_CAP_DEVICE_DEASSIGNMENT 27
#endif
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
#ifdef KVM_CAP_IRQ_ROUTING
/* bits 24:31 of ap->flags are reserved for LLD specific flags */
+
/* struct ata_port pflags */
ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */
ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
+ ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */
+ ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */
+
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */
struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
struct ata_port_operations *ops;
spinlock_t *lock;
+ /* Flags owned by the EH context. Only EH should touch these once the
+ port is active */
unsigned long flags; /* ATA_FLAG_xxx */
+ /* Flags that change dynamically, protected by ap->lock */
unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int print_id; /* user visible unique port ID */
unsigned int port_no; /* 0 based port no. inside the host */
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
extern int ata_sff_port_start(struct ata_port *ap);
+extern int ata_sff_port_start32(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
unsigned long xfer_mask);
enum lru_list from, enum lru_list to);
extern void mem_cgroup_uncharge_page(struct page *page);
extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern int mem_cgroup_shrink_usage(struct page *page,
+extern int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
{
struct mem_cgroup *mem;
rcu_read_lock();
- mem = mem_cgroup_from_task((mm)->owner);
+ mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
rcu_read_unlock();
return cgroup == mem;
}
{
}
-static inline int mem_cgroup_shrink_usage(struct page *page,
+static inline int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
char **batteries;
int num_batteries;
+ int charging_restart_interval;
+
/* Callbacks */
void (*probe_done)(struct pcf50633 *);
void (*mbc_event_callback)(struct pcf50633 *, int);
int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
int pcf50633_mbc_get_status(struct pcf50633 *);
-void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status);
#endif
#ifdef __KERNEL__
#include <linux/mm.h>
+#include <linux/percpu_counter.h>
#include <asm/atomic.h>
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_long_t vm_committed_space;
+extern struct percpu_counter vm_committed_as;
-#ifdef CONFIG_SMP
-extern void vm_acct_memory(long pages);
-#else
static inline void vm_acct_memory(long pages)
{
- atomic_long_add(pages, &vm_committed_space);
+ percpu_counter_add(&vm_committed_as, pages);
}
-#endif
static inline void vm_unacct_memory(long pages)
{
#define pfn_valid_within(pfn) (1)
#endif
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+/*
+ * pfn_valid() is meant to be able to tell if a given PFN has valid memmap
+ * associated with it or not. In FLATMEM, it is expected that holes always
+ * have valid memmap as long as there is valid PFNs either side of the hole.
+ * In SPARSEMEM, it is assumed that a valid section has a memmap for the
+ * entire section.
+ *
+ * However, an ARM, and maybe other embedded architectures in the future
+ * free memmap backing holes to save memory on the assumption the memmap is
+ * never used. The page_zone linkages are then broken even though pfn_valid()
+ * returns true. A walker of the full memmap must then do this additional
+ * check to ensure the memmap they are looking at is sane by making sure
+ * the zone and PFN linkages are still valid. This is expensive, but walkers
+ * of the full memmap are extremely rare.
+ */
+int memmap_valid_within(unsigned long pfn,
+ struct page *page, struct zone *zone);
+#else
+static inline int memmap_valid_within(unsigned long pfn,
+ struct page *page, struct zone *zone)
+{
+ return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
+
#endif /* !__GENERATING_BOUNDS.H */
#endif /* !__ASSEMBLY__ */
#endif /* _LINUX_MMZONE_H */
extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
const char *, unsigned int, struct nameidata *);
-extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
int (*open)(struct inode *, struct file *));
extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
#ifndef __NET_DROPMON_H
#define __NET_DROPMON_H
+#include <linux/types.h>
#include <linux/netlink.h>
struct net_dm_drop_point {
# else
# define LL_MAX_HEADER 96
# endif
-#elif defined(CONFIG_TR)
+#elif defined(CONFIG_TR) || defined(CONFIG_TR_MODULE)
# define LL_MAX_HEADER 48
#else
# define LL_MAX_HEADER 32
*
* int (*ndo_set_mac_address)(struct net_device *dev, void *addr);
* This function is called when the Media Access Control address
- * needs to be changed. If not this interface is not defined, the
+ * needs to be changed. If this interface is not defined, the
* mac address can not be changed.
*
* int (*ndo_validate_addr)(struct net_device *dev);
/* Has unacknowledged data */
#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10
+/* The field td_maxack has been set */
+#define IP_CT_TCP_FLAG_MAXACK_SET 0x20
+
struct nf_ct_tcp_flags {
__u8 flags;
__u8 mask;
u_int32_t td_end; /* max of seq + len */
u_int32_t td_maxend; /* max of ack + max(win, 1) */
u_int32_t td_maxwin; /* max(win) */
+ u_int32_t td_maxack; /* max of ack */
u_int8_t td_scale; /* window scale factor */
u_int8_t flags; /* per direction options */
};
enum ctattr_protoinfo_dccp {
CTA_PROTOINFO_DCCP_UNSPEC,
CTA_PROTOINFO_DCCP_STATE,
+ CTA_PROTOINFO_DCCP_ROLE,
__CTA_PROTOINFO_DCCP_MAX,
};
#define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1)
/* What hooks you will enter on */
unsigned int valid_hooks;
- /* Lock for the curtain */
- struct mutex lock;
-
/* Man behind the curtain... */
struct xt_table_info *private;
extern struct xt_table_info *xt_alloc_table_info(unsigned int size);
extern void xt_free_table_info(struct xt_table_info *info);
-extern void xt_table_entry_swap_rcu(struct xt_table_info *old,
- struct xt_table_info *new);
+
+/*
+ * Per-CPU spinlock associated with per-cpu table entries, and
+ * with a counter for the "reading" side that allows a recursive
+ * reader to avoid taking the lock and deadlocking.
+ *
+ * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu.
+ * It needs to ensure that the rules are not being changed while the packet
+ * is being processed. In some cases, the read lock will be acquired
+ * twice on the same CPU; this is okay because of the count.
+ *
+ * "writing" is used when reading counters.
+ * During replace any readers that are using the old tables have to complete
+ * before freeing the old table. This is handled by the write locking
+ * necessary for reading the counters.
+ */
+struct xt_info_lock {
+ spinlock_t lock;
+ unsigned char readers;
+};
+DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks);
+
+/*
+ * Note: we need to ensure that preemption is disabled before acquiring
+ * the per-cpu-variable, so we do it as a two step process rather than
+ * using "spin_lock_bh()".
+ *
+ * We _also_ need to disable bottom half processing before updating our
+ * nesting count, to make sure that the only kind of re-entrancy is this
+ * code being called by itself: since the count+lock is not an atomic
+ * operation, we can allow no races.
+ *
+ * _Only_ that special combination of being per-cpu and never getting
+ * re-entered asynchronously means that the count is safe.
+ */
+static inline void xt_info_rdlock_bh(void)
+{
+ struct xt_info_lock *lock;
+
+ local_bh_disable();
+ lock = &__get_cpu_var(xt_info_locks);
+ if (likely(!lock->readers++))
+ spin_lock(&lock->lock);
+}
+
+static inline void xt_info_rdunlock_bh(void)
+{
+ struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
+
+ if (likely(!--lock->readers))
+ spin_unlock(&lock->lock);
+ local_bh_enable();
+}
+
+/*
+ * The "writer" side needs to get exclusive access to the lock,
+ * regardless of readers. This must be called with bottom half
+ * processing (and thus also preemption) disabled.
+ */
+static inline void xt_info_wrlock(unsigned int cpu)
+{
+ spin_lock(&per_cpu(xt_info_locks, cpu).lock);
+}
+
+static inline void xt_info_wrunlock(unsigned int cpu)
+{
+ spin_unlock(&per_cpu(xt_info_locks, cpu).lock);
+}
/*
* This helper is performance critical and must be inlined
#ifndef _XT_LED_H
#define _XT_LED_H
+#include <linux/types.h>
+
struct xt_led_info {
char id[27]; /* Unique ID for this trigger in the LED class */
__u8 always_blink; /* Blink even if the LED is already on */
u_int32_t flags;
};
+#define XT_CLUSTER_NODES_MAX 32
+
#endif /* _XT_CLUSTER_MATCH_H */
return 0;
}
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+ int charlen;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+ return charlen > 0 ? charlen : 1;
+}
+
#define MODULE_ALIAS_NLS(name) MODULE_ALIAS("nls_" __stringify(name))
#endif /* _LINUX_NLS_H */
struct bus_type *bus);
extern void of_unregister_driver(struct of_platform_driver *drv);
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+ return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+ of_unregister_driver(drv);
+}
+
#include <asm/of_platform.h>
extern struct of_device *of_find_device_by_node(struct device_node *np);
int spintime;
atomic_t ref_count;
+ unsigned long devflags;
+#define PARPORT_DEVPROC_REGISTERED 0
+ struct pardevice *proc_device; /* Currently register proc device */
+
struct list_head full_list;
struct parport *slaves[3];
};
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
-#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409
+#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409
#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e
#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
+#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
unsigned int wait_for_status; /* msecs, default is 500 */
unsigned int wait_for_charger; /* msecs, default is 500 */
unsigned int polling_interval; /* msecs, default is 2000 */
+
+ unsigned long ac_max_uA; /* current to draw when on AC */
};
#endif /* __PDA_POWER_H__ */
--- /dev/null
+#ifndef _LINUX_PERCPU_DEFS_H
+#define _LINUX_PERCPU_DEFS_H
+
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+/*
+ * Base implementations of per-CPU variable declarations and definitions, where
+ * the section in which the variable is to be placed is provided by the
+ * 'section' argument. This may be used to affect the parameters governing the
+ * variable's storage.
+ *
+ * NOTE! The sections for the DECLARE and for the DEFINE must match, lest
+ * linkage errors occur due the compiler generating the wrong code to access
+ * that section.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, section) \
+ extern \
+ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define DEFINE_PER_CPU_SECTION(type, name, section) \
+ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+/*
+ * Variant on the per-CPU variable declaration/definition theme used for
+ * ordinary per-CPU variables.
+ */
+#define DECLARE_PER_CPU(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DEFINE_PER_CPU(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, "")
+
+/*
+ * Declaration/definition used for per-CPU variables that must come first in
+ * the set of variables.
+ */
+#define DECLARE_PER_CPU_FIRST(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+#define DEFINE_PER_CPU_FIRST(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be cacheline
+ * aligned under SMP conditions so that, whilst a particular instance of the
+ * data corresponds to a particular CPU, inefficiencies due to direct access by
+ * other CPUs are reduced by preventing the data from unnecessarily spanning
+ * cachelines.
+ *
+ * An example of this would be statistical data, where each CPU's set of data
+ * is updated by that CPU alone, but the data from across all CPUs is collated
+ * by a CPU processing a read from a proc file.
+ */
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+ ____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+ ____cacheline_aligned_in_smp
+
+/*
+ * Declaration/definition used for per-CPU variables that must be page aligned.
+ */
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+/*
+ * Intermodule exports for per-CPU variables.
+ */
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+
+#endif /* _LINUX_PERCPU_DEFS_H */
#include <asm/percpu.h>
-#ifndef PER_CPU_BASE_SECTION
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
-#endif
-
-#define DEFINE_PER_CPU_SECTION(type, name, section) \
- __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, "")
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
- ____cacheline_aligned_in_smp
-
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
-
-#define DEFINE_PER_CPU_FIRST(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
/* enough to cover all DEFINE_PER_CPUs in modules */
#ifdef CONFIG_MODULES
#define PERCPU_MODULE_RESERVE (8 << 10)
#define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \
__alignof__(type))
+/*
+ * Optional methods for optimized non-lvalue per-cpu variable access.
+ *
+ * @var can be a percpu variable or a field of it and its size should
+ * equal char, int or long. percpu_read() evaluates to a lvalue and
+ * all others to void.
+ *
+ * These operations are guaranteed to be atomic w.r.t. preemption.
+ * The generic versions use plain get/put_cpu_var(). Archs are
+ * encouraged to implement single-instruction alternatives which don't
+ * require preemption protection.
+ */
+#ifndef percpu_read
+# define percpu_read(var) \
+ ({ \
+ typeof(per_cpu_var(var)) __tmp_var__; \
+ __tmp_var__ = get_cpu_var(var); \
+ put_cpu_var(var); \
+ __tmp_var__; \
+ })
+#endif
+
+#define __percpu_generic_to_op(var, val, op) \
+do { \
+ get_cpu_var(var) op val; \
+ put_cpu_var(var); \
+} while (0)
+
+#ifndef percpu_write
+# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =)
+#endif
+
+#ifndef percpu_add
+# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=)
+#endif
+
+#ifndef percpu_sub
+# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=)
+#endif
+
+#ifndef percpu_and
+# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=)
+#endif
+
+#ifndef percpu_or
+# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=)
+#endif
+
+#ifndef percpu_xor
+# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=)
+#endif
+
#endif /* __LINUX_PERCPU_H */
/* Enables or disables interrupts */
int (*config_intr)(struct phy_device *phydev);
+ /*
+ * Checks if the PHY generated an interrupt.
+ * For multi-PHY devices with shared PHY interrupt pin
+ */
+ int (*did_interrupt)(struct phy_device *phydev);
+
/* Clears up any memory if needed */
void (*remove)(struct phy_device *phydev);
memory allocation, whereas PIPE_BUF makes atomicity guarantees. */
#define PIPE_SIZE PAGE_SIZE
+/* Pipe lock and unlock operations */
+void pipe_lock(struct pipe_inode_info *);
+void pipe_unlock(struct pipe_inode_info *);
+void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe);
#include <linux/cdrom.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/mempool.h>
/* default bio write queue congestion marks */
#define PKT_WRITE_CONGESTION_ON 10000
struct device dev;
u32 num_resources;
struct resource * resource;
- void *platform_data;
struct platform_device_id *id_entry;
};
#define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev)
#define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data))
+/* early platform driver interface */
+struct early_platform_driver {
+ const char *class_str;
+ struct platform_driver *pdrv;
+ struct list_head list;
+ int requested_id;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+ char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+ return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+ int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+
+#ifndef MODULE
+#define early_platform_init(class_string, platform_driver) \
+static __initdata struct early_platform_driver early_driver = { \
+ .class_str = class_string, \
+ .pdrv = platform_driver, \
+ .requested_id = EARLY_PLATFORM_ID_UNSET, \
+}; \
+static int __init early_platform_driver_setup_func(char *buf) \
+{ \
+ return early_platform_driver_register(&early_driver, buf); \
+} \
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init(class_string, platform_driver)
+#endif /* MODULE */
+
#endif /* _PLATFORM_DEVICE_H_ */
unsigned long offline_fqs; /* Kicked due to being offline. */
unsigned long resched_ipi; /* Sent a resched IPI. */
- /* 5) state to allow this CPU to force_quiescent_state on others */
+ /* 5) For future __rcu_pending statistics. */
long n_rcu_pending; /* rcu_pending() calls since boot. */
- long n_rcu_pending_force_qs; /* when to force quiescent states. */
int cpu;
};
* @set_current_limit: Configure a limit for a current-limited regulator.
* @get_current_limit: Get the configured limit for a current-limited regulator.
*
+ * @set_mode: Set the configured operating mode for the regulator.
* @get_mode: Get the configured operating mode for the regulator.
* @get_status: Return actual (not as-configured) status of regulator, as a
* REGULATOR_STATUS value (or negative errno)
atomic_t j_wcount; /* count of writers for current commit */
unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */
unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */
- unsigned long j_last_flush_trans_id; /* last fully flushed journal timestamp */
+ unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */
struct buffer_head *j_header_bh;
time_t j_trans_start_time; /* time this transaction started */
int reserved_blocks; /* amount of blocks reserved for further allocations */
spinlock_t bitmap_lock; /* this lock on now only used to protect reserved_blocks variable */
struct dentry *priv_root; /* root of /.reiserfs_priv */
- struct dentry *xattr_root; /* root of /.reiserfs_priv/.xa */
+ struct dentry *xattr_root; /* root of /.reiserfs_priv/xattrs */
int j_errno;
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS];
#define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG))
#define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED))
#define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
-#define reiserfs_xattrs(s) ((s)->s_xattr != NULL)
#define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
#define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
#define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
int reiserfs_xattr_register_handlers(void) __init;
void reiserfs_xattr_unregister_handlers(void);
int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
+int reiserfs_lookup_privroot(struct super_block *sb);
int reiserfs_delete_xattrs(struct inode *inode);
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
+int reiserfs_permission(struct inode *inode, int mask);
#ifdef CONFIG_REISERFS_FS_XATTR
#define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
const void *value, size_t size, int flags);
ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size);
int reiserfs_removexattr(struct dentry *dentry, const char *name);
-int reiserfs_permission(struct inode *inode, int mask);
int reiserfs_xattr_get(struct inode *, const char *, void *, size_t);
int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int);
if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) {
nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
- if (REISERFS_SB(inode->i_sb)->xattr_root == NULL)
+ if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode)
nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
}
#define reiserfs_listxattr NULL
#define reiserfs_removexattr NULL
-#define reiserfs_permission NULL
-
static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
{
}
#define ROMFH_PAD (ROMFH_SIZE-1)
#define ROMFH_MASK (~ROMFH_PAD)
-#ifdef __KERNEL__
-
-/* Not much now */
-
-#endif /* __KERNEL__ */
#endif
--- /dev/null
+#ifndef __ROTARY_ENCODER_H__
+#define __ROTARY_ENCODER_H__
+
+struct rotary_encoder_platform_data {
+ unsigned int steps;
+ unsigned int axis;
+ unsigned int gpio_a;
+ unsigned int gpio_b;
+ unsigned int inverted_a;
+ unsigned int inverted_b;
+};
+
+#endif /* __ROTARY_ENCODER_H__ */
* 11 bit fractions.
*/
extern unsigned long avenrun[]; /* Load averages */
+extern void get_avenrun(unsigned long *loads, unsigned long offset, int shift);
#define FSHIFT 11 /* nr of bits of precision */
#define FIXED_1 (1<<FSHIFT) /* 1.0 as fixed-point */
extern int nr_processes(void);
extern unsigned long nr_running(void);
extern unsigned long nr_uninterruptible(void);
-extern unsigned long nr_active(void);
extern unsigned long nr_iowait(void);
+extern void calc_global_load(void);
extern unsigned long get_parent_ip(unsigned long addr);
#define task_is_stopped_or_traced(task) \
((task->state & (__TASK_STOPPED | __TASK_TRACED)) != 0)
#define task_contributes_to_load(task) \
- ((task->state & TASK_UNINTERRUPTIBLE) != 0)
+ ((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
+ (task->flags & PF_FROZEN) == 0)
#define __set_task_state(tsk, state_value) \
do { (tsk)->state = (state_value); } while (0)
*/
u32 reciprocal_cpu_power;
- unsigned long cpumask[];
+ /*
+ * The CPUs this group covers.
+ *
+ * NOTE: this field is variable length. (Allocated dynamically
+ * by attaching extra space to the end of the structure,
+ * depending on how many CPUs the kernel has booted up with)
+ *
+ * It is also be embedded into static data structures at build
+ * time. (See 'struct static_sched_group' in kernel/sched.c)
+ */
+ unsigned long cpumask[0];
};
static inline struct cpumask *sched_group_cpus(struct sched_group *sg)
char *name;
#endif
- /* span of all CPUs in this domain */
- unsigned long span[];
+ /*
+ * Span of all CPUs in this domain.
+ *
+ * NOTE: this field is variable length. (Allocated dynamically
+ * by attaching extra space to the end of the structure,
+ * depending on how many CPUs the kernel has booted up with)
+ *
+ * It is also be embedded into static data structures at build
+ * time. (See 'struct static_sched_domain' in kernel/sched.c)
+ */
+ unsigned long span[0];
};
static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
#else /* CONFIG_SECCOMP */
+#include <linux/errno.h>
+
typedef struct { } seccomp_t;
#define secure_computing(x) do { } while (0)
--- /dev/null
+#ifndef __LINUX_SECTION_NAMES_H
+#define __LINUX_SECTION_NAMES_H
+
+#define HEAD_TEXT_SECTION .head.text
+
+#endif /* !__LINUX_SECTION_NAMES_H */
--- /dev/null
+/*
+ *
+ * Copyright (C) 2007 Christian Pellegrin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+
+#ifndef _LINUX_SERIAL_MAX3100_H
+#define _LINUX_SERIAL_MAX3100_H 1
+
+
+/**
+ * struct plat_max3100 - MAX3100 SPI UART platform data
+ * @loopback: force MAX3100 in loopback
+ * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432
+ * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook
+ * called on suspend and resume to activate it.
+ * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw
+ * flow ctrl is possible but you have less CPU usage)
+ *
+ * You should use this structure in your machine description to specify
+ * how the MAX3100 is connected. Example:
+ *
+ * static struct plat_max3100 max3100_plat_data = {
+ * .loopback = 0,
+ * .crystal = 0,
+ * .poll_time = 100,
+ * };
+ *
+ * static struct spi_board_info spi_board_info[] = {
+ * {
+ * .modalias = "max3100",
+ * .platform_data = &max3100_plat_data,
+ * .irq = IRQ_EINT12,
+ * .max_speed_hz = 5*1000*1000,
+ * .chip_select = 0,
+ * },
+ * };
+ *
+ **/
+struct plat_max3100 {
+ int loopback;
+ int crystal;
+ void (*max3100_hw_suspend) (int suspend);
+ int poll_time;
+};
+
+#endif
--- /dev/null
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data: no. of gpio to which bidirectional data line is connected
+ * @gpio_sck: no. of gpio to which the data clock is connected.
+ * @supply_mv: supply voltage in mv. Overridden by regulator if available.
+ **/
+struct sht15_platform_data {
+ int gpio_data;
+ int gpio_sck;
+ int supply_mv;
+};
+
}
/**
- * slow_work_init - Initialise a very slow work item
+ * vslow_work_init - Initialise a very slow work item
* @work: The work item to initialise
* @ops: The operations to use to handle the slow work item
*
--- /dev/null
+/* linux/spi/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models. The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+ u16 model; /* 7879 */
+ u16 x_plate_ohms;
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ u16 pressure_min, pressure_max;
+
+ /* [0..255] 0=OFF Starts at 1=550us and goes
+ * all the way to 9.440ms in steps of 35us.
+ */
+ u8 pen_down_acc_interval;
+ /* [0..15] Starts at 0=128us and goes all the
+ * way to 4.096ms in steps of 128us.
+ */
+ u8 first_conversion_delay;
+ /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+ u8 acquisition_time;
+ /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+ u8 averaging;
+ /* [0..3] Perform X measurements 0 = OFF,
+ * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+ */
+ u8 median;
+ /* 1 = AUX/VBAT/GPIO set to GPIO Output */
+ u8 gpio_output;
+ /* Initial GPIO pin state (valid if gpio_output = 1) */
+ u8 gpio_default;
+};
void **filter_data);
int (*filter) (void *filter_data, int data_idx, int *val);
void (*filter_cleanup)(void *filter_data);
+ void (*wait_for_sync)(void);
};
*/
u16 dma_alignment;
- /* setup mode and clock, etc (spi driver may call many times) */
+ /* Setup mode and clock, etc (spi driver may call many times).
+ *
+ * IMPORTANT: this may be called when transfers to another
+ * device are active. DO NOT UPDATE SHARED REGISTERS in ways
+ * which could break those transfers.
+ */
int (*setup)(struct spi_device *spi);
/* bidirectional bulk transfers
void *data; /* cookie */
} u;
loff_t pos; /* file position */
+ size_t num_spliced; /* number of bytes already spliced */
+ bool need_wakeup; /* need to wake up writer */
};
struct partial_page {
splice_actor *);
extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
struct splice_desc *, splice_actor *);
+extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
+ splice_actor *);
+extern int splice_from_pipe_next(struct pipe_inode_info *,
+ struct splice_desc *);
+extern void splice_from_pipe_begin(struct splice_desc *);
+extern void splice_from_pipe_end(struct pipe_inode_info *,
+ struct splice_desc *);
+extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
+ struct splice_desc *);
+
extern ssize_t splice_to_pipe(struct pipe_inode_info *,
struct splice_pipe_desc *);
extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
* converts to "bar".
*/
-#define __stringify_1(x) #x
-#define __stringify(x) __stringify_1(x)
+#define __stringify_1(x...) #x
+#define __stringify(x...) __stringify_1(x)
#endif /* !__LINUX_STRINGIFY_H */
#define XPRT_BINDING (5)
#define XPRT_CLOSING (6)
#define XPRT_CONNECTION_ABORT (7)
+#define XPRT_CONNECTION_CLOSE (8)
static inline void xprt_set_connected(struct rpc_xprt *xprt)
{
* by @begin().
* @prepare() is called right after devices have been suspended (ie. the
* appropriate .suspend() method has been executed for each device) and
- * before the nonboot CPUs are disabled (it is executed with IRQs enabled).
- * This callback is optional. It returns 0 on success or a negative
- * error code otherwise, in which case the system cannot enter the desired
- * sleep state (@enter() and @finish() will not be called in that case).
+ * before device drivers' late suspend callbacks are executed. It returns
+ * 0 on success or a negative error code otherwise, in which case the
+ * system cannot enter the desired sleep state (@prepare_late(), @enter(),
+ * @wake(), and @finish() will not be called in that case).
+ *
+ * @prepare_late: Finish preparing the platform for entering the system sleep
+ * state indicated by @begin().
+ * @prepare_late is called before disabling nonboot CPUs and after
+ * device drivers' late suspend callbacks have been executed. It returns
+ * 0 on success or a negative error code otherwise, in which case the
+ * system cannot enter the desired sleep state (@enter() and @wake()).
*
* @enter: Enter the system sleep state indicated by @begin() or represented by
* the argument if @begin() is not implemented.
* error code otherwise, in which case the system cannot enter the desired
* sleep state.
*
- * @finish: Called when the system has just left a sleep state, right after
- * the nonboot CPUs have been enabled and before devices are resumed (it is
- * executed with IRQs enabled).
+ * @wake: Called when the system has just left a sleep state, right after
+ * the nonboot CPUs have been enabled and before device drivers' early
+ * resume callbacks are executed.
+ * This callback is optional, but should be implemented by the platforms
+ * that implement @prepare_late(). If implemented, it is always called
+ * after @enter(), even if @enter() fails.
+ *
+ * @finish: Finish wake-up of the platform.
+ * @finish is called right prior to calling device drivers' regular suspend
+ * callbacks.
* This callback is optional, but should be implemented by the platforms
* that implement @prepare(). If implemented, it is always called after
- * @enter() (even if @enter() fails).
+ * @enter() and @wake(), if implemented, even if any of them fails.
*
* @end: Called by the PM core right after resuming devices, to indicate to
* the platform that the system has returned to the working state or
* the transition to the sleep state has been aborted.
* This callback is optional, but should be implemented by the platforms
- * that implement @begin(), but platforms implementing @begin() should
- * also provide a @end() which cleans up transitions aborted before
+ * that implement @begin(). Accordingly, platforms implementing @begin()
+ * should also provide a @end() which cleans up transitions aborted before
* @enter().
*
* @recover: Recover the platform from a suspend failure.
int (*valid)(suspend_state_t state);
int (*begin)(suspend_state_t state);
int (*prepare)(void);
+ int (*prepare_late)(void);
int (*enter)(suspend_state_t state);
+ void (*wake)(void);
void (*finish)(void);
void (*end)(void);
void (*recover)(void);
return 0;
}
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+{
+}
+
#endif /* CONFIG_SWAP */
#endif /* __KERNEL__*/
#endif /* _LINUX_SWAP_H */
#include <asm/signal.h>
#include <linux/quota.h>
#include <linux/key.h>
-#include <linux/ftrace.h>
+#include <trace/syscall.h>
#define __SC_DECL1(t1, a1) t1 a1
#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
"\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
#else
-#ifdef CONFIG_ALPHA
+#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
#define SYSCALL_ALIAS(alias, name) \
asm ( #alias " = " #name "\n\t.globl " #alias)
#else
asmlinkage long sys_fcntl64(unsigned int fd,
unsigned int cmd, unsigned long arg);
#endif
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
asmlinkage long sys_dup(unsigned int fildes);
asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
/**
* tracehook_report_clone - in parent, new child is about to start running
- * @trace: return value from tracehook_prepare_clone()
* @regs: parent's user register state
* @clone_flags: flags from parent's system call
* @pid: new child's PID in the parent's namespace
* @child: new child task
*
- * Called after a child is set up, but before it has been started
- * running. @trace is the value returned by tracehook_prepare_clone().
+ * Called after a child is set up, but before it has been started running.
* This is not a good place to block, because the child has not started
* yet. Suspend the child here if desired, and then block in
* tracehook_report_clone_complete(). This must prevent the child from
*
* Called with no locks held, but the child cannot run until this returns.
*/
-static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
+static inline void tracehook_report_clone(struct pt_regs *regs,
unsigned long clone_flags,
pid_t pid, struct task_struct *child)
{
- if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) {
+ if (unlikely(task_ptrace(child))) {
/*
- * The child starts up with an immediate SIGSTOP.
+ * It doesn't matter who attached/attaching to this
+ * task, the pending SIGSTOP is right in any case.
*/
sigaddset(&child->pending.signal, SIGSTOP);
set_tsk_thread_flag(child, TIF_SIGPENDING);
extern int usb_clear_halt(struct usb_device *dev, int pipe);
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
/* this request isn't really synchronous, but it belongs with the others */
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
- ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
- ((bit) << (ep)))
-
-
static inline unsigned int __create_pipe(struct usb_device *dev,
unsigned int endpoint)
{
#define USB_CDC_SUBCLASS_DMM 0x09
#define USB_CDC_SUBCLASS_MDLM 0x0a
#define USB_CDC_SUBCLASS_OBEX 0x0b
+#define USB_CDC_SUBCLASS_EEM 0x0c
#define USB_CDC_PROTO_NONE 0
#define USB_CDC_ACM_PROTO_AT_CDMA 6
#define USB_CDC_ACM_PROTO_VENDOR 0xff
+#define USB_CDC_PROTO_EEM 7
+
/*-------------------------------------------------------------------------*/
/*
* key configuration differences between boards.
*/
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
/* The USB role is defined by the connector used on the board, so long as
* standards are being followed. (Developer boards sometimes won't.)
*/
extern int tusb6010_platform_retime(unsigned is_refclk);
#endif /* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
/**
* usb_serial_port: structure for the specific ports of a device.
* @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
+ * @port: pointer to the corresponding tty_port for this port.
* @lock: spinlock to grab when updating portions of this structure.
* @mutex: mutex used to synchronize serial_open() and serial_close()
* access for this port.
* @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
* for this port.
* @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
* @read_urb: pointer to the bulk in struct urb for this port.
* @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
* port.
* @bulk_out_buffer: pointer to the bulk out buffer for this port.
* @bulk_out_size: the size of the bulk_out_buffer, in bytes.
* @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_urb_busy: port`s writing status
* @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
* port.
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
+ * @console: attached usb serial console
+ * @dev: pointer to the serial device
*
* This structure is used by the usb-serial core and drivers for the specific
* ports of a device.
* compatible drivers/servers. */
#include <linux/types.h>
#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
/* The ID for virtio_net */
#define VIRTIO_ID_NET 1
list_del(&old->task_list);
}
-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
- int nr_exclusive, int sync, void *key);
void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key);
void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr,
int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
-#define DEFINE_WAIT(name) \
+#define DEFINE_WAIT_FUNC(name, function) \
wait_queue_t name = { \
.private = current, \
- .func = autoremove_wake_function, \
+ .func = function, \
.task_list = LIST_HEAD_INIT((name).task_list), \
}
+#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function)
+
#define DEFINE_WAIT_BIT(name, word, bit) \
struct wait_bit_queue name = { \
.key = __WAIT_BIT_KEY_INITIALIZER(word, bit), \
/* pdflush.c */
extern int nr_pdflush_threads; /* Global so it can be exported to sysctl
read-only. */
-extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
-extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
#endif /* WRITEBACK_H */
struct p9_req_t {
int status;
int t_err;
- u16 flush_tag;
wait_queue_head_t *wq;
struct p9_fcall *tc;
struct p9_fcall *rc;
/* HCI timeouts */
#define HCI_CONNECT_TIMEOUT (40000) /* 40 seconds */
#define HCI_DISCONN_TIMEOUT (2000) /* 2 seconds */
+#define HCI_PAIRING_TIMEOUT (60000) /* 60 seconds */
#define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */
#define HCI_INIT_TIMEOUT (10000) /* 10 seconds */
__u8 auth_type;
__u8 sec_level;
__u8 power_save;
+ __u16 disc_timeout;
unsigned long pend;
unsigned int sent;
struct timer_list disc_timer;
struct timer_list idle_timer;
- struct work_struct work;
+ struct work_struct work_add;
+ struct work_struct work_del;
struct device dev;
if (conn->type == ACL_LINK) {
del_timer(&conn->idle_timer);
if (conn->state == BT_CONNECTED) {
- timeo = msecs_to_jiffies(HCI_DISCONN_TIMEOUT);
+ timeo = msecs_to_jiffies(conn->disc_timeout);
if (!conn->out)
- timeo *= 5;
+ timeo *= 2;
} else
timeo = msecs_to_jiffies(10);
} else
int hci_register_sysfs(struct hci_dev *hdev);
void hci_unregister_sysfs(struct hci_dev *hdev);
+void hci_conn_init_sysfs(struct hci_conn *conn);
void hci_conn_add_sysfs(struct hci_conn *conn);
void hci_conn_del_sysfs(struct hci_conn *conn);
const union nf_inet_addr *,
u_int8_t, const __be16 *, const __be16 *);
void nf_ct_expect_put(struct nf_conntrack_expect *exp);
-int nf_ct_expect_related(struct nf_conntrack_expect *expect);
int nf_ct_expect_related_report(struct nf_conntrack_expect *expect,
u32 pid, int report);
+static inline int nf_ct_expect_related(struct nf_conntrack_expect *expect)
+{
+ return nf_ct_expect_related_report(expect, 0, 0);
+}
#endif /*_NF_CONNTRACK_EXPECT_H*/
#define IP_NAT_RANGE_MAP_IPS 1
#define IP_NAT_RANGE_PROTO_SPECIFIED 2
#define IP_NAT_RANGE_PROTO_RANDOM 4
+#define IP_NAT_RANGE_PERSISTENT 8
/* NAT sequence number modifications */
struct nf_nat_seq {
#include <net/ip.h>
#include <net/tcp_states.h>
#include <net/inet_ecn.h>
+#include <net/dst.h>
#include <linux/seq_file.h>
tcp_fast_path_on(tp);
}
+/* Compute the actual rto_min value */
+static inline u32 tcp_rto_min(struct sock *sk)
+{
+ struct dst_entry *dst = __sk_dst_get(sk);
+ u32 rto_min = TCP_RTO_MIN;
+
+ if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
+ rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
+ return rto_min;
+}
+
/* Compute the actual receive window we are currently advertising.
* Rcv_nxt can be after the window if our peer push more data
* than the offered window.
wake_up_interruptible(sk->sk_sleep);
if (!inet_csk_ack_scheduled(sk))
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
- (3 * TCP_RTO_MIN) / 4,
+ (3 * tcp_rto_min(sk)) / 4,
TCP_RTO_MAX);
}
return 1;
sk_common_release(sk);
}
-extern int ipv4_rcv_saddr_equal(const struct sock *sk1,
- const struct sock *sk2);
extern int udp_lib_get_port(struct sock *sk, unsigned short snum,
int (*)(const struct sock*,const struct sock*));
* Well-known fabric addresses.
*/
enum fc_well_known_fid {
+ FC_FID_NONE = 0x000000, /* No destination */
FC_FID_BCAST = 0xffffff, /* broadcast */
FC_FID_FLOGI = 0xfffffe, /* fabric login */
FC_FID_FCTRL = 0xfffffd, /* fabric controller */
enum fc_disc_event);
struct list_head rports;
+ struct list_head rogue_rports;
struct fc_lport *lport;
struct mutex disc_mutex;
struct fc_gpn_ft_resp partial_buf; /* partial name buffer */
struct scsi_host_template;
struct scsi_device;
struct Scsi_Host;
+struct scsi_target;
struct scsi_cmnd;
struct socket;
struct iscsi_transport;
bool xmit_can_sleep);
extern void iscsi_host_remove(struct Scsi_Host *shost);
extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
/*
* session management
OSDv1_ADDITIONAL_CDB_LENGTH = 192,
OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
OSDv1_CAP_LEN = 80,
+
/* Latest supported version */
-/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/
+ OSDv2_ADDITIONAL_CDB_LENGTH = 228,
OSD_ADDITIONAL_CDB_LENGTH =
- OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */
+ OSDv2_ADDITIONAL_CDB_LENGTH,
OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
-/* OSD_CAP_LEN = 104,*/
- OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */
+ OSD_CAP_LEN = 104,
OSD_SYSTEMID_LEN = 20,
- OSD_CRYPTO_KEYID_SIZE = 20,
- /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/
+ OSDv1_CRYPTO_KEYID_SIZE = 20,
+ OSDv2_CRYPTO_KEYID_SIZE = 32,
+ OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
OSD_CRYPTO_SEED_SIZE = 4,
OSD_CRYPTO_NONCE_SIZE = 12,
OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
/* called allocation_length in some commands */
/*32*/ __be64 length;
/*40*/ __be64 start_address;
-/*48*/ __be32 list_identifier;/* Rarely used */
+ union {
+/*48*/ __be32 list_identifier;/* Rarely used */
+ /* OSD2r05 5.2.5 CDB continuation length */
+/*48*/ __be32 cdb_continuation_length;
+ };
} __packed v2;
};
/*52*/ union { /* selected attributes mode Page/List/Single */
/*80*/
/*160 v1*/
-/*184 v2*/
-struct osd_security_parameters {
-/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+struct osdv1_security_parameters {
+/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
/*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
/*192*/osd_cdb_offset data_in_integrity_check_offset;
/*196*/osd_cdb_offset data_out_integrity_check_offset;
} __packed;
/*200 v1*/
-/*224 v2*/
-/* FIXME: osdv2_security_parameters */
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset data_in_integrity_check_offset;
+/*232*/osd_cdb_offset data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+ union {
+ struct osdv1_security_parameters v1;
+ struct osdv2_security_parameters v2;
+ };
+};
struct osdv1_cdb {
struct osd_cdb_head h;
u8 caps[OSDv1_CAP_LEN];
- struct osd_security_parameters sec_params;
+ struct osdv1_security_parameters sec_params;
} __packed;
struct osdv2_cdb {
struct osd_cdb_head h;
u8 caps[OSD_CAP_LEN];
- struct osd_security_parameters sec_params;
- /* FIXME: osdv2_security_parameters */
+ struct osdv2_security_parameters sec_params;
} __packed;
struct osd_cdb {
__be32 attr_id;
} __packed;
+/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+ __be32 attr_page;
+ __be32 attr_id;
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
+ u8 attr_val[0];
+} __packed;
+
/*
* osd2r03: 7.1.3.3 List entry format for retrieved attributes and
* for setting attributes
- * NOTE: v2 is 8-bytes aligned, v1 is not aligned.
+ * NOTE: v2 is 8-bytes aligned
*/
-struct osd_attributes_list_element {
+struct osdv2_attributes_list_element {
__be32 attr_page;
__be32 attr_id;
- __be16 attr_bytes;
+ u8 reserved[6];
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
u8 attr_val[0];
} __packed;
static inline unsigned osdv1_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
OSDv1_ATTRIBUTES_ELEM_ALIGN);
}
static inline unsigned osdv2_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
OSD_ATTRIBUTES_ELEM_ALIGN);
}
__be64 data_bytes;
__be64 set_attributes_bytes;
__be64 get_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_out_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_data_in_integrity_info {
__be64 data_bytes;
__be64 retrieved_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_in_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_timestamp {
u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
} __packed;
OSD_SEC_CAP_NONE1 = BIT(8),
OSD_SEC_CAP_NONE2 = BIT(9),
- OSD_SEC_CAP_NONE3 = BIT(10),
+ OSD_SEC_GBL_REM = BIT(10), /*v2 only*/
OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/
OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/
OSD_SEC_CAP_POL_SEC = BIT(13),
struct osd_capability {
struct osd_capability_head h;
-/* struct osd_cap_object_descriptor od;*/
- struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */
+ struct osd_cap_object_descriptor od;
} __packed;
/**
--- /dev/null
+#ifndef _SCSI_SCSI_SCAN_H
+#define _SCSI_SCSI_SCAN_H
+
+#ifdef CONFIG_SCSI
+/* drivers/scsi/scsi_scan.c */
+extern int scsi_complete_async_scans(void);
+#else
+static inline int scsi_complete_async_scans(void) { return 0; }
+#endif
+
+#endif /* _SCSI_SCSI_SCAN_H */
if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
result = 0;
else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
- result = DID_TRANSPORT_DISRUPTED << 16;
+ result = DID_IMM_RETRY << 16;
else
result = DID_NO_CONNECT << 16;
break;
if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)
result = DID_TRANSPORT_FAILFAST << 16;
else
- result = DID_TRANSPORT_DISRUPTED << 16;
+ result = DID_IMM_RETRY << 16;
break;
default:
result = DID_NO_CONNECT << 16;
int type;
const char *id;
char name[100];
+ void *private_data;
+ void (*private_free)(struct snd_jack *);
};
#ifdef CONFIG_SND_JACK
int overrange;
snd_pcm_uframes_t avail_max;
snd_pcm_uframes_t hw_ptr_base; /* Position at buffer restart */
- snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/
+ snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
+ unsigned long hw_ptr_jiffies; /* Time when hw_ptr is updated */
/* -- HW params -- */
snd_pcm_access_t access; /* access mode */
extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
-/* AC97 platform_data */
-/**
- * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- * a -1 value means no gpio will be used for reset
- *
- * Platform data should only be specified for pxa27x CPUs where a silicon bug
- * prevents correct operation of the reset line. If not specified, the default
- * behaviour is to consider gpio 113 as the AC97 reset line, which is the
- * default on most boards.
- */
-struct pxa2xx_ac97_platform_data {
- int reset_gpio;
-};
-
#endif
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.19"
+#define CONFIG_SND_VERSION "1.0.20"
#define CONFIG_SND_DATE ""
--- /dev/null
+#ifndef _TRACE_SYSCALL_H
+#define _TRACE_SYSCALL_H
+
+#include <asm/ptrace.h>
+
+/*
+ * A syscall entry in the ftrace syscalls array.
+ *
+ * @name: name of the syscall
+ * @nb_args: number of parameters it takes
+ * @types: list of types as strings
+ * @args: list of args as strings (args[i] matches types[i])
+ */
+struct syscall_metadata {
+ const char *name;
+ int nb_args;
+ const char **types;
+ const char **args;
+};
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+extern void arch_init_ftrace_syscalls(void);
+extern struct syscall_metadata *syscall_nr_to_meta(int nr);
+extern void start_ftrace_syscalls(void);
+extern void stop_ftrace_syscalls(void);
+extern void ftrace_syscall_enter(struct pt_regs *regs);
+extern void ftrace_syscall_exit(struct pt_regs *regs);
+#else
+static inline void start_ftrace_syscalls(void) { }
+static inline void stop_ftrace_syscalls(void) { }
+static inline void ftrace_syscall_enter(struct pt_regs *regs) { }
+static inline void ftrace_syscall_exit(struct pt_regs *regs) { }
+#endif
+
+#endif /* _TRACE_SYSCALL_H */
+++ /dev/null
-
-#ifndef CYBLAFB_DEBUG
-#define CYBLAFB_DEBUG 0
-#endif
-
-#if CYBLAFB_DEBUG
-#define debug(f,a...) printk("%s:" f, __func__ , ## a);
-#else
-#define debug(f,a...)
-#endif
-
-#define output(f, a...) printk("cyblafb: " f, ## a)
-
-#define Kb (1024)
-#define Mb (Kb*Kb)
-
-/* PCI IDS of supported cards temporarily here */
-
-#define CYBERBLADEi1 0x8500
-
-/* these defines are for 'lcd' variable */
-#define LCD_STRETCH 0
-#define LCD_CENTER 1
-#define LCD_BIOS 2
-
-/* display types */
-#define DISPLAY_CRT 0
-#define DISPLAY_FP 1
-
-#define ROP_S 0xCC
-
-#define point(x,y) ((y)<<16|(x))
-
-//
-// Attribute Regs, ARxx, 3c0/3c1
-//
-#define AR00 0x00
-#define AR01 0x01
-#define AR02 0x02
-#define AR03 0x03
-#define AR04 0x04
-#define AR05 0x05
-#define AR06 0x06
-#define AR07 0x07
-#define AR08 0x08
-#define AR09 0x09
-#define AR0A 0x0A
-#define AR0B 0x0B
-#define AR0C 0x0C
-#define AR0D 0x0D
-#define AR0E 0x0E
-#define AR0F 0x0F
-#define AR10 0x10
-#define AR12 0x12
-#define AR13 0x13
-
-//
-// Sequencer Regs, SRxx, 3c4/3c5
-//
-#define SR00 0x00
-#define SR01 0x01
-#define SR02 0x02
-#define SR03 0x03
-#define SR04 0x04
-#define SR0D 0x0D
-#define SR0E 0x0E
-#define SR11 0x11
-#define SR18 0x18
-#define SR19 0x19
-
-//
-//
-//
-#define CR00 0x00
-#define CR01 0x01
-#define CR02 0x02
-#define CR03 0x03
-#define CR04 0x04
-#define CR05 0x05
-#define CR06 0x06
-#define CR07 0x07
-#define CR08 0x08
-#define CR09 0x09
-#define CR0A 0x0A
-#define CR0B 0x0B
-#define CR0C 0x0C
-#define CR0D 0x0D
-#define CR0E 0x0E
-#define CR0F 0x0F
-#define CR10 0x10
-#define CR11 0x11
-#define CR12 0x12
-#define CR13 0x13
-#define CR14 0x14
-#define CR15 0x15
-#define CR16 0x16
-#define CR17 0x17
-#define CR18 0x18
-#define CR19 0x19
-#define CR1A 0x1A
-#define CR1B 0x1B
-#define CR1C 0x1C
-#define CR1D 0x1D
-#define CR1E 0x1E
-#define CR1F 0x1F
-#define CR20 0x20
-#define CR21 0x21
-#define CR27 0x27
-#define CR29 0x29
-#define CR2A 0x2A
-#define CR2B 0x2B
-#define CR2D 0x2D
-#define CR2F 0x2F
-#define CR36 0x36
-#define CR38 0x38
-#define CR39 0x39
-#define CR3A 0x3A
-#define CR55 0x55
-#define CR56 0x56
-#define CR57 0x57
-#define CR58 0x58
-
-//
-//
-//
-
-#define GR00 0x01
-#define GR01 0x01
-#define GR02 0x02
-#define GR03 0x03
-#define GR04 0x04
-#define GR05 0x05
-#define GR06 0x06
-#define GR07 0x07
-#define GR08 0x08
-#define GR0F 0x0F
-#define GR20 0x20
-#define GR23 0x23
-#define GR2F 0x2F
-#define GR30 0x30
-#define GR31 0x31
-#define GR33 0x33
-#define GR52 0x52
-#define GR53 0x53
-#define GR5D 0x5d
-
-
-//
-// Graphics Engine
-//
-#define GEBase 0x2100 // could be mapped elsewhere if we like it
-#define GE00 (GEBase+0x00) // source 1, p 111
-#define GE04 (GEBase+0x04) // source 2, p 111
-#define GE08 (GEBase+0x08) // destination 1, p 111
-#define GE0C (GEBase+0x0C) // destination 2, p 112
-#define GE10 (GEBase+0x10) // right view base & enable, p 112
-#define GE13 (GEBase+0x13) // left view base & enable, p 112
-#define GE18 (GEBase+0x18) // block write start address, p 112
-#define GE1C (GEBase+0x1C) // block write end address, p 112
-#define GE20 (GEBase+0x20) // engine status, p 113
-#define GE24 (GEBase+0x24) // reset all GE pointers
-#define GE44 (GEBase+0x44) // command register, p 126
-#define GE48 (GEBase+0x48) // raster operation, p 127
-#define GE60 (GEBase+0x60) // foreground color, p 128
-#define GE64 (GEBase+0x64) // background color, p 128
-#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok
-#define GE9C (GEBase+0x9C) // pixel engine data port, p 125
-#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133
-#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133
-#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133
-#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133
-#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133
-#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133
-#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133
-#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133
you wait for kallsyms to be fixed.
+config STRIP_ASM_SYMS
+ bool "Strip assembler-generated symbols during link"
+ default n
+ help
+ Strip internal assembler-generated symbols during a link (symbols
+ that look like '.Lxxx') so they don't pollute the output of
+ get_wchan() and suchlike.
+
config HOTPLUG
bool "Support for hot-pluggable devices" if EMBEDDED
default y
if (wfd >= 0) {
sys_fchown(wfd, uid, gid);
sys_fchmod(wfd, mode);
- sys_ftruncate(wfd, body_len);
+ if (body_len)
+ sys_ftruncate(wfd, body_len);
vcollected = kstrdup(collected, GFP_KERNEL);
state = CopyFile;
}
initrd_end = 0;
}
+#ifdef CONFIG_BLK_DEV_RAM
#define BUF_SIZE 1024
static void __init clean_rootfs(void)
{
sys_close(fd);
kfree(buf);
}
+#endif
static int __init populate_rootfs(void)
{
if (initrd_start) {
#ifdef CONFIG_BLK_DEV_RAM
int fd;
- printk(KERN_INFO "checking if image is initramfs...\n");
+ printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
if (!err) {
- printk(KERN_INFO "rootfs image is initramfs; unpacking...\n");
free_initrd();
return 0;
} else {
free_initrd();
}
#else
- printk(KERN_INFO "Unpacking initramfs...");
+ printk(KERN_INFO "Unpacking initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
- if (err) {
- printk(" failed!\n");
- printk(KERN_EMERG "%s\n", err);
- } else {
- printk(" done\n");
- }
+ if (err)
+ printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
free_initrd();
#endif
}
return 0;
}
+void __init parse_early_options(char *cmdline)
+{
+ parse_args("early options", cmdline, NULL, 0, do_early_param);
+}
+
/* Arch code calls this early on, or if not, just before other parsing. */
void __init parse_early_param(void)
{
/* All fall through to do_early_param. */
strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+ parse_early_options(tmp_cmdline);
done = 1;
}
tick_init();
boot_cpu_init();
page_address_init();
- printk(KERN_NOTICE);
- printk(linux_banner);
+ printk(KERN_NOTICE "%s", linux_banner);
setup_arch(&command_line);
mm_init_owner(&init_mm, &init_task);
setup_command_line(command_line);
#define MIN_MSGSIZEMAX 128 /* min value for msgsize_max */
#define MAX_MSGSIZEMAX (8192*128) /* max value for msgsize_max */
+#ifdef CONFIG_PROC_SYSCTL
static void *get_mq(ctl_table *table)
{
char *which = table->data;
return which;
}
-#ifdef CONFIG_PROC_SYSCTL
static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
{
struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma, *next;
+ struct vm_area_struct *vma;
unsigned long addr = (unsigned long)shmaddr;
- loff_t size = 0;
int retval = -EINVAL;
+#ifdef CONFIG_MMU
+ loff_t size = 0;
+ struct vm_area_struct *next;
+#endif
if (addr & ~PAGE_MASK)
return retval;
static async_cookie_t __lowest_in_progress(struct list_head *running)
{
struct async_entry *entry;
+
if (!list_empty(running)) {
entry = list_first_entry(running,
struct async_entry, list);
return entry->cookie;
- } else if (!list_empty(&async_pending)) {
- entry = list_first_entry(&async_pending,
- struct async_entry, list);
- return entry->cookie;
- } else {
- /* nothing in progress... next_cookie is "infinity" */
- return next_cookie;
}
+ list_for_each_entry(entry, &async_pending, list)
+ if (entry->running == running)
+ return entry->cookie;
+
+ return next_cookie; /* "infinity" value */
}
static async_cookie_t lowest_in_progress(struct list_head *running)
dentry = dget(path.dentry);
path_put(&path);
- if (dentry == tagged->mnt_root && dentry == mnt->mnt_root)
- follow_up(&mnt, &dentry);
-
list_add_tail(&list, &tagged->mnt_list);
mutex_lock(&audit_filter_mutex);
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
e = container_of(r, struct audit_entry, rule);
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
free_cg_links:
free_cg_links(&tmp_cg_links);
drop_new_super:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return ret;
}
sig->cputime_expires.virt_exp = cputime_zero;
sig->cputime_expires.sched_exp = 0;
+ if (sig->rlim[RLIMIT_CPU].rlim_cur != RLIM_INFINITY) {
+ sig->cputime_expires.prof_exp =
+ secs_to_cputime(sig->rlim[RLIMIT_CPU].rlim_cur);
+ sig->cputimer.running = 1;
+ }
+
/* The timer lists. */
INIT_LIST_HEAD(&sig->cpu_timers[0]);
INIT_LIST_HEAD(&sig->cpu_timers[1]);
atomic_inc(¤t->signal->live);
return 0;
}
- sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
-
- if (sig)
- posix_cpu_timers_init_group(sig);
+ sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL);
tsk->signal = sig;
if (!sig)
return -ENOMEM;
memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim);
task_unlock(current->group_leader);
+ posix_cpu_timers_init_group(sig);
+
acct_init_pacct(&sig->pacct);
tty_audit_fork(sig);
}
audit_finish_fork(p);
- tracehook_report_clone(trace, regs, clone_flags, nr, p);
+ tracehook_report_clone(regs, clone_flags, nr, p);
/*
* We set PF_STARTING at creation in case tracing wants to
* @uaddr: virtual address of the futex
* @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
* @key: address where result is stored.
+ * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
*
* lock_page() might sleep, the caller should not hold a spinlock.
*/
-static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
+static int
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
* but access_ok() should be faster than find_vma()
*/
if (!fshared) {
- if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
+ if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
return -EFAULT;
key->private.mm = mm;
key->private.address = address;
}
again:
- err = get_user_pages_fast(address, 1, 0, &page);
+ err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
if (err < 0)
return err;
if (!bitset)
return -EINVAL;
- ret = get_futex_key(uaddr, fshared, &key);
+ ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
int ret, op_ret;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1);
+ ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2);
+ ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out_put_key1;
int ret, drop_count = 0;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1);
+ ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2);
+ ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_READ);
if (unlikely(ret != 0))
goto out_put_key1;
out_unlock:
double_unlock_hb(hb1, hb2);
- /* drop_futex_key_refs() must be called outside the spinlocks. */
+ /*
+ * drop_futex_key_refs() must be called outside the spinlocks. During
+ * the requeue we moved futex_q's from the hash bucket at key1 to the
+ * one at key2 and updated their key pointer. We no longer need to
+ * hold the references to key1.
+ */
while (--drop_count >= 0)
drop_futex_key_refs(&key1);
q.bitset = bitset;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key);
+ ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
q.pi_state = NULL;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key);
+ ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
return -EPERM;
- ret = get_futex_key(uaddr, fshared, &key);
+ ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
-obj-$(CONFIG_NUMA_MIGRATE_IRQ_DESC) += numa_migrate.o
+obj-$(CONFIG_NUMA_IRQ_DESC) += numa_migrate.o
obj-$(CONFIG_PM_SLEEP) += pm.o
spin_lock(&desc->lock);
mask_ack_irq(desc, irq);
- desc = irq_remap_to_desc(irq, desc);
if (unlikely(desc->status & IRQ_INPROGRESS))
goto out_unlock;
desc->status &= ~IRQ_INPROGRESS;
out:
desc->chip->eoi(irq);
- desc = irq_remap_to_desc(irq, desc);
spin_unlock(&desc->lock);
}
!desc->action)) {
desc->status |= (IRQ_PENDING | IRQ_MASKED);
mask_ack_irq(desc, irq);
- desc = irq_remap_to_desc(irq, desc);
goto out_unlock;
}
kstat_incr_irqs_this_cpu(irq, desc);
/* Start handling the irq */
if (desc->chip->ack)
desc->chip->ack(irq);
- desc = irq_remap_to_desc(irq, desc);
/* Mark the IRQ currently in progress.*/
desc->status |= IRQ_INPROGRESS;
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
- if (desc->chip->eoi) {
+ if (desc->chip->eoi)
desc->chip->eoi(irq);
- desc = irq_remap_to_desc(irq, desc);
- }
}
void
/* Uninstall? */
if (handle == handle_bad_irq) {
- if (desc->chip != &no_irq_chip) {
+ if (desc->chip != &no_irq_chip)
mask_ack_irq(desc, irq);
- desc = irq_remap_to_desc(irq, desc);
- }
desc->status |= IRQ_DISABLED;
desc->depth = 1;
}
*/
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
.lock = __SPIN_LOCK_UNLOCKED(irq_desc_init.lock),
};
-void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr)
+void __ref init_kstat_irqs(struct irq_desc *desc, int node, int nr)
{
- int node;
void *ptr;
- node = cpu_to_node(cpu);
- ptr = kzalloc_node(nr * sizeof(*desc->kstat_irqs), GFP_ATOMIC, node);
+ if (slab_is_available())
+ ptr = kzalloc_node(nr * sizeof(*desc->kstat_irqs),
+ GFP_ATOMIC, node);
+ else
+ ptr = alloc_bootmem_node(NODE_DATA(node),
+ nr * sizeof(*desc->kstat_irqs));
/*
* don't overwite if can not get new one
* init_copy_kstat_irqs() could still use old one
*/
if (ptr) {
- printk(KERN_DEBUG " alloc kstat_irqs on cpu %d node %d\n",
- cpu, node);
+ printk(KERN_DEBUG " alloc kstat_irqs on node %d\n", node);
desc->kstat_irqs = ptr;
}
}
-static void init_one_irq_desc(int irq, struct irq_desc *desc, int cpu)
+static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)
{
memcpy(desc, &irq_desc_init, sizeof(struct irq_desc));
spin_lock_init(&desc->lock);
desc->irq = irq;
#ifdef CONFIG_SMP
- desc->cpu = cpu;
+ desc->node = node;
#endif
lockdep_set_class(&desc->lock, &irq_desc_lock_class);
- init_kstat_irqs(desc, cpu, nr_cpu_ids);
+ init_kstat_irqs(desc, node, nr_cpu_ids);
if (!desc->kstat_irqs) {
printk(KERN_ERR "can not alloc kstat_irqs\n");
BUG_ON(1);
}
- if (!init_alloc_desc_masks(desc, cpu, false)) {
+ if (!alloc_desc_masks(desc, node, false)) {
printk(KERN_ERR "can not alloc irq_desc cpumasks\n");
BUG_ON(1);
}
- arch_init_chip_data(desc, cpu);
+ init_desc_masks(desc);
+ arch_init_chip_data(desc, node);
}
/*
desc[i].irq = i;
desc[i].kstat_irqs = kstat_irqs_legacy + i * nr_cpu_ids;
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
- init_alloc_desc_masks(&desc[i], 0, true);
+ alloc_desc_masks(&desc[i], 0, true);
+ init_desc_masks(&desc[i]);
irq_desc_ptrs[i] = desc + i;
}
return NULL;
}
-struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
+struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)
{
struct irq_desc *desc;
unsigned long flags;
- int node;
if (irq >= nr_irqs) {
WARN(1, "irq (%d) >= nr_irqs (%d) in irq_to_desc_alloc\n",
if (desc)
goto out_unlock;
- node = cpu_to_node(cpu);
- desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
- printk(KERN_DEBUG " alloc irq_desc for %d on cpu %d node %d\n",
- irq, cpu, node);
+ if (slab_is_available())
+ desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
+ else
+ desc = alloc_bootmem_node(NODE_DATA(node), sizeof(*desc));
+
+ printk(KERN_DEBUG " alloc irq_desc for %d on node %d\n", irq, node);
if (!desc) {
printk(KERN_ERR "can not alloc irq_desc\n");
BUG_ON(1);
}
- init_one_irq_desc(irq, desc, cpu);
+ init_one_irq_desc(irq, desc, node);
irq_desc_ptrs[irq] = desc;
for (i = 0; i < count; i++) {
desc[i].irq = i;
- init_alloc_desc_masks(&desc[i], 0, true);
+ alloc_desc_masks(&desc[i], 0, true);
+ init_desc_masks(&desc[i]);
desc[i].kstat_irqs = kstat_irqs_all[i];
}
return arch_early_irq_init();
return (irq < NR_IRQS) ? irq_desc + irq : NULL;
}
-struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
+struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node)
{
return irq_to_desc(irq);
}
irqreturn_t ret, retval = IRQ_NONE;
unsigned int status = 0;
- WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!");
-
if (!(action->flags & IRQF_DISABLED))
local_irq_enable_in_hardirq();
/*
* No locking required for CPU-local interrupts:
*/
- if (desc->chip->ack) {
+ if (desc->chip->ack)
desc->chip->ack(irq);
- /* get new one */
- desc = irq_remap_to_desc(irq, desc);
- }
if (likely(!(desc->status & IRQ_DISABLED))) {
action_ret = handle_IRQ_event(irq, desc->action);
if (!noirqdebug)
}
spin_lock(&desc->lock);
- if (desc->chip->ack) {
+ if (desc->chip->ack)
desc->chip->ack(irq);
- desc = irq_remap_to_desc(irq, desc);
- }
/*
* REPLAY is when Linux resends an IRQ that was dropped earlier
* WAITING is used by probe to mark irqs that are being tested
extern void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume);
extern struct lock_class_key irq_desc_lock_class;
-extern void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr);
+extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
extern void clear_kstat_irqs(struct irq_desc *desc);
extern spinlock_t sparse_irq_lock;
extern int irq_select_affinity_usr(unsigned int irq);
+extern void
+irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+
/*
* Debugging printout:
*/
return 1;
}
-static void
+void
irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
{
struct irqaction *action = desc->action;
spin_lock_irqsave(&desc->lock, flags);
#ifdef CONFIG_GENERIC_PENDING_IRQ
- if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- cpumask_copy(desc->affinity, cpumask);
- desc->chip->set_affinity(irq, cpumask);
- } else {
+ if (desc->status & IRQ_MOVE_PCNTXT) {
+ if (!desc->chip->set_affinity(irq, cpumask)) {
+ cpumask_copy(desc->affinity, cpumask);
+ irq_set_thread_affinity(desc, cpumask);
+ }
+ }
+ else {
desc->status |= IRQ_MOVE_PENDING;
cpumask_copy(desc->pending_mask, cpumask);
}
#else
- cpumask_copy(desc->affinity, cpumask);
- desc->chip->set_affinity(irq, cpumask);
+ if (!desc->chip->set_affinity(irq, cpumask)) {
+ cpumask_copy(desc->affinity, cpumask);
+ irq_set_thread_affinity(desc, cpumask);
+ }
#endif
- irq_set_thread_affinity(desc, cpumask);
desc->status |= IRQ_AFFINITY_SET;
spin_unlock_irqrestore(&desc->lock, flags);
return 0;
#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include "internals.h"
void move_masked_irq(int irq)
{
* masking the irqs.
*/
if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask)
- < nr_cpu_ids)) {
- cpumask_and(desc->affinity,
- desc->pending_mask, cpu_online_mask);
- desc->chip->set_affinity(irq, desc->affinity);
- }
+ < nr_cpu_ids))
+ if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
+ cpumask_copy(desc->affinity, desc->pending_mask);
+ irq_set_thread_affinity(desc, desc->pending_mask);
+ }
+
cpumask_clear(desc->pending_mask);
}
static void init_copy_kstat_irqs(struct irq_desc *old_desc,
struct irq_desc *desc,
- int cpu, int nr)
+ int node, int nr)
{
- init_kstat_irqs(desc, cpu, nr);
+ init_kstat_irqs(desc, node, nr);
if (desc->kstat_irqs != old_desc->kstat_irqs)
memcpy(desc->kstat_irqs, old_desc->kstat_irqs,
}
static bool init_copy_one_irq_desc(int irq, struct irq_desc *old_desc,
- struct irq_desc *desc, int cpu)
+ struct irq_desc *desc, int node)
{
memcpy(desc, old_desc, sizeof(struct irq_desc));
- if (!init_alloc_desc_masks(desc, cpu, false)) {
+ if (!alloc_desc_masks(desc, node, false)) {
printk(KERN_ERR "irq %d: can not get new irq_desc cpumask "
"for migration.\n", irq);
return false;
}
spin_lock_init(&desc->lock);
- desc->cpu = cpu;
+ desc->node = node;
lockdep_set_class(&desc->lock, &irq_desc_lock_class);
- init_copy_kstat_irqs(old_desc, desc, cpu, nr_cpu_ids);
+ init_copy_kstat_irqs(old_desc, desc, node, nr_cpu_ids);
init_copy_desc_masks(old_desc, desc);
- arch_init_copy_chip_data(old_desc, desc, cpu);
+ arch_init_copy_chip_data(old_desc, desc, node);
return true;
}
static void free_one_irq_desc(struct irq_desc *old_desc, struct irq_desc *desc)
{
free_kstat_irqs(old_desc, desc);
+ free_desc_masks(old_desc, desc);
arch_free_chip_data(old_desc, desc);
}
static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,
- int cpu)
+ int node)
{
struct irq_desc *desc;
unsigned int irq;
unsigned long flags;
- int node;
irq = old_desc->irq;
if (desc && old_desc != desc)
goto out_unlock;
- node = cpu_to_node(cpu);
desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
if (!desc) {
printk(KERN_ERR "irq %d: can not get new irq_desc "
desc = old_desc;
goto out_unlock;
}
- if (!init_copy_one_irq_desc(irq, old_desc, desc, cpu)) {
+ if (!init_copy_one_irq_desc(irq, old_desc, desc, node)) {
/* still use old one */
kfree(desc);
desc = old_desc;
/* free the old one */
free_one_irq_desc(old_desc, desc);
- spin_unlock(&old_desc->lock);
kfree(old_desc);
- spin_lock(&desc->lock);
return desc;
return desc;
}
-struct irq_desc *move_irq_desc(struct irq_desc *desc, int cpu)
+struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
{
- int old_cpu;
- int node, old_node;
-
/* those all static, do move them */
if (desc->irq < NR_IRQS_LEGACY)
return desc;
- old_cpu = desc->cpu;
- if (old_cpu != cpu) {
- node = cpu_to_node(cpu);
- old_node = cpu_to_node(old_cpu);
- if (old_node != node)
- desc = __real_move_irq_desc(desc, cpu);
- else
- desc->cpu = cpu;
- }
+ if (desc->node != node)
+ desc = __real_move_irq_desc(desc, node);
return desc;
}
error = device_suspend(PMSG_FREEZE);
if (error)
goto Resume_console;
- device_pm_lock();
/* At this point, device_suspend() has been called,
* but *not* device_power_down(). We *must*
* device_power_down() now. Otherwise, drivers for
enable_nonboot_cpus();
device_power_up(PMSG_RESTORE);
Resume_devices:
- device_pm_unlock();
device_resume(PMSG_RESTORE);
Resume_console:
resume_console();
static struct sysrq_key_op sysrq_gdb_op = {
.handler = sysrq_handle_gdb,
- .help_msg = "Gdb",
- .action_msg = "GDB",
+ .help_msg = "debug(G)",
+ .action_msg = "DEBUG",
};
#endif
sub_info->argv = argv;
sub_info->envp = envp;
sub_info->cred = prepare_usermodehelper_creds();
- if (!sub_info->cred)
+ if (!sub_info->cred) {
+ kfree(sub_info);
return NULL;
+ }
out:
return sub_info;
return NULL;
}
+/* Arm a kprobe with text_mutex */
+static void __kprobes arm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_arm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
+/* Disarm a kprobe with text_mutex */
+static void __kprobes disarm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_disarm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
/*
* Aggregate handlers for multiple kprobes support - these handlers
* take care of invoking the individual kprobe handlers on p->list
ap->flags &= ~KPROBE_FLAG_DISABLED;
if (!kprobes_all_disarmed)
/* Arm the breakpoint again. */
- arch_arm_kprobe(ap);
+ arm_kprobe(ap);
}
return 0;
}
* enabled and not gone - otherwise, the breakpoint would
* already have been removed. We save on flushing icache.
*/
- if (!kprobes_all_disarmed && !kprobe_disabled(old_p)) {
- mutex_lock(&text_mutex);
- arch_disarm_kprobe(p);
- mutex_unlock(&text_mutex);
- }
+ if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
+ disarm_kprobe(p);
hlist_del_rcu(&old_p->hlist);
} else {
if (p->break_handler && !kprobe_gone(p))
if (!kprobe_disabled(old_p)) {
try_to_disable_aggr_kprobe(old_p);
if (!kprobes_all_disarmed && kprobe_disabled(old_p))
- arch_disarm_kprobe(old_p);
+ disarm_kprobe(old_p);
}
}
return 0;
try_to_disable_aggr_kprobe(p);
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_disarm_kprobe(p);
+ disarm_kprobe(p);
out:
mutex_unlock(&kprobe_mutex);
return ret;
}
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_arm_kprobe(p);
+ arm_kprobe(p);
p->flags &= ~KPROBE_FLAG_DISABLED;
if (p != kp)
/* OK, tell user we're spawned, wait for stop or wakeup */
__set_current_state(TASK_UNINTERRUPTIBLE);
+ create->result = current;
complete(&create->started);
schedule();
/* We want our own signal handler (we take no signals by default). */
pid = kernel_thread(kthread, create, CLONE_FS | CLONE_FILES | SIGCHLD);
- if (pid < 0) {
+ if (pid < 0)
create->result = ERR_PTR(pid);
- } else {
- struct sched_param param = { .sched_priority = 0 };
+ else
wait_for_completion(&create->started);
- read_lock(&tasklist_lock);
- create->result = find_task_by_pid_ns(pid, &init_pid_ns);
- read_unlock(&tasklist_lock);
- /*
- * root may have changed our (kthreadd's) priority or CPU mask.
- * The kernel thread should not inherit these properties.
- */
- sched_setscheduler(create->result, SCHED_NORMAL, ¶m);
- set_user_nice(create->result, KTHREAD_NICE_LEVEL);
- set_cpus_allowed_ptr(create->result, cpu_all_mask);
- }
complete(&create->done);
}
wait_for_completion(&create.done);
if (!IS_ERR(create.result)) {
+ struct sched_param param = { .sched_priority = 0 };
va_list args;
+
va_start(args, namefmt);
vsnprintf(create.result->comm, sizeof(create.result->comm),
namefmt, args);
va_end(args);
+ /*
+ * root may have changed our (kthreadd's) priority or CPU mask.
+ * The kernel thread should not inherit these properties.
+ */
+ sched_setscheduler_nocheck(create.result, SCHED_NORMAL, ¶m);
+ set_user_nice(create.result, KTHREAD_NICE_LEVEL);
+ set_cpus_allowed_ptr(create.result, cpu_all_mask);
}
return create.result;
}
void lockdep_init_map(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, int subclass)
{
- if (unlikely(!debug_locks))
+ lock->class_cache = NULL;
+#ifdef CONFIG_LOCK_STAT
+ lock->cpu = raw_smp_processor_id();
+#endif
+
+ if (DEBUG_LOCKS_WARN_ON(!name)) {
+ lock->name = "NULL";
return;
+ }
+
+ lock->name = name;
if (DEBUG_LOCKS_WARN_ON(!key))
return;
- if (DEBUG_LOCKS_WARN_ON(!name))
- return;
/*
* Sanity check, the lock-class key must be persistent:
*/
DEBUG_LOCKS_WARN_ON(1);
return;
}
- lock->name = name;
lock->key = key;
- lock->class_cache = NULL;
-#ifdef CONFIG_LOCK_STAT
- lock->cpu = raw_smp_processor_id();
-#endif
+
+ if (unlikely(!debug_locks))
+ return;
+
if (subclass)
register_lock_class(lock, subclass, 1);
}
* table (if it's not there yet), and we check it for lock order
* conflicts and deadlocks.
*/
-#define MAX_LOCKDEP_ENTRIES 8192UL
+#define MAX_LOCKDEP_ENTRIES 16384UL
-#define MAX_LOCKDEP_CHAINS_BITS 14
+#define MAX_LOCKDEP_CHAINS_BITS 15
#define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS)
#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
blocking_notifier_call_chain(&module_notify_list,
MODULE_STATE_LIVE, mod);
+ /* We need to finish all async code before the module init sequence is done */
+ async_synchronize_full();
+
mutex_lock(&module_mutex);
/* Drop initial reference. */
module_put(mod);
preempt_disable();
mutex_acquire(&lock->dep_map, subclass, 0, ip);
-#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES)
+#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES) && \
+ !defined(CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES)
/*
* Optimistic spinning.
*
/* didnt get the lock, go to sleep: */
spin_unlock_mutex(&lock->wait_lock, flags);
- __schedule();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
spin_lock_mutex(&lock->wait_lock, flags);
}
void add_taint(unsigned flag)
{
- /* can't trust the integrity of the kernel anymore: */
- debug_locks = 0;
+ /*
+ * Can't trust the integrity of the kernel anymore.
+ * We don't call directly debug_locks_off() because the issue
+ * is not necessarily serious enough to set oops_in_progress to 1
+ * Also we want to keep up lockdep for staging development and
+ * post-warning case.
+ */
+ if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off())
+ printk(KERN_WARNING "Disabling lock debugging due to kernel taint\n");
+
set_bit(flag, &tainted_mask);
}
EXPORT_SYMBOL(add_taint);
}
#ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath(const char *file, int line, const char *fmt, ...)
-{
+struct slowpath_args {
+ const char *fmt;
va_list args;
- char function[KSYM_SYMBOL_LEN];
- unsigned long caller = (unsigned long)__builtin_return_address(0);
- const char *board;
+};
- sprint_symbol(function, caller);
+static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args)
+{
+ const char *board;
printk(KERN_WARNING "------------[ cut here ]------------\n");
- printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
- line, function);
+ printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller);
board = dmi_get_system_info(DMI_PRODUCT_NAME);
if (board)
printk(KERN_WARNING "Hardware name: %s\n", board);
- if (fmt) {
- va_start(args, fmt);
- vprintk(fmt, args);
- va_end(args);
- }
+ if (args)
+ vprintk(args->fmt, args->args);
print_modules();
dump_stack();
print_oops_end_marker();
add_taint(TAINT_WARN);
}
-EXPORT_SYMBOL(warn_slowpath);
+
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
+{
+ struct slowpath_args args;
+
+ args.fmt = fmt;
+ va_start(args.args, fmt);
+ warn_slowpath_common(file, line, __builtin_return_address(0), &args);
+ va_end(args.args);
+}
+EXPORT_SYMBOL(warn_slowpath_fmt);
+
+void warn_slowpath_null(const char *file, int line)
+{
+ warn_slowpath_common(file, line, __builtin_return_address(0), NULL);
+}
+EXPORT_SYMBOL(warn_slowpath_null);
#endif
#ifdef CONFIG_CC_STACKPROTECTOR
cputime = secs_to_cputime(rlim_new);
if (cputime_eq(current->signal->it_prof_expires, cputime_zero) ||
- cputime_lt(current->signal->it_prof_expires, cputime)) {
+ cputime_gt(current->signal->it_prof_expires, cputime)) {
spin_lock_irq(¤t->sighand->siglock);
set_process_cpu_timer(current, CPUCLOCK_PROF, &cputime, NULL);
spin_unlock_irq(¤t->sighand->siglock);
cpu->cpu = virt_ticks(p);
break;
case CPUCLOCK_SCHED:
- cpu->sched = p->se.sum_exec_runtime + task_delta_exec(p);
+ cpu->sched = task_sched_runtime(p);
break;
}
return 0;
{
struct task_cputime cputime;
- thread_group_cputime(p, &cputime);
switch (CPUCLOCK_WHICH(which_clock)) {
default:
return -EINVAL;
case CPUCLOCK_PROF:
+ thread_group_cputime(p, &cputime);
cpu->cpu = cputime_add(cputime.utime, cputime.stime);
break;
case CPUCLOCK_VIRT:
+ thread_group_cputime(p, &cputime);
cpu->cpu = cputime.utime;
break;
case CPUCLOCK_SCHED:
- cpu->sched = cputime.sum_exec_runtime + task_delta_exec(p);
+ cpu->sched = thread_group_sched_runtime(p);
break;
}
return 0;
* timer call will interfere.
*/
list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) {
- int firing;
+ int cpu_firing;
+
spin_lock(&timer->it_lock);
list_del_init(&timer->it.cpu.entry);
- firing = timer->it.cpu.firing;
+ cpu_firing = timer->it.cpu.firing;
timer->it.cpu.firing = 0;
/*
* The firing flag is -1 if we collided with a reset
* of the timer, which already reported this
* almost-firing as an overrun. So don't generate an event.
*/
- if (likely(firing >= 0)) {
+ if (likely(cpu_firing >= 0))
cpu_timer_fire(timer);
- }
spin_unlock(&timer->it_lock);
}
}
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
+#include <scsi/scsi_scan.h>
#include <asm/suspend.h>
#include "power.h"
if (error)
return error;
- device_pm_lock();
-
/* At this point, device_suspend() has been called, but *not*
* device_power_down(). We *must* call device_power_down() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting hibernation\n");
- goto Unlock;
+ return error;
}
error = platform_pre_snapshot(platform_mode);
local_irq_disable();
- sysdev_suspend(PMSG_FREEZE);
+ error = sysdev_suspend(PMSG_FREEZE);
if (error) {
- printk(KERN_ERR "PM: Some devices failed to power down, "
+ printk(KERN_ERR "PM: Some system devices failed to power down, "
"aborting hibernation\n");
goto Enable_irqs;
}
device_power_up(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- Unlock:
- device_pm_unlock();
-
return error;
}
{
int error;
- device_pm_lock();
-
error = device_power_down(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
- goto Unlock;
+ return error;
}
error = platform_pre_restore(platform_mode);
device_power_up(PMSG_RECOVER);
- Unlock:
- device_pm_unlock();
-
return error;
}
goto Resume_devices;
}
- device_pm_lock();
-
error = device_power_down(PMSG_HIBERNATE);
if (error)
- goto Unlock;
+ goto Resume_devices;
error = hibernation_ops->prepare();
if (error)
device_power_up(PMSG_RESTORE);
- Unlock:
- device_pm_unlock();
-
Resume_devices:
entering_platform_hibernation = false;
device_resume(PMSG_RESTORE);
* here to avoid lockdep complaining.
*/
mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
+
+ if (swsusp_resume_device)
+ goto Check_image;
+
+ if (!strlen(resume_file)) {
+ error = -ENOENT;
+ goto Unlock;
+ }
+
+ pr_debug("PM: Checking image partition %s\n", resume_file);
+
+ /* Check if the device is there */
+ swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
- if (!strlen(resume_file)) {
- mutex_unlock(&pm_mutex);
- return -ENOENT;
- }
/*
* Some device discovery might still be in progress; we need
* to wait for this to finish.
*/
wait_for_device_probe();
+ /*
+ * We can't depend on SCSI devices being available after loading
+ * one of their modules until scsi_complete_async_scans() is
+ * called and the resume device usually is a SCSI one.
+ */
+ scsi_complete_async_scans();
+
swsusp_resume_device = name_to_dev_t(resume_file);
- pr_debug("PM: Resume from partition %s\n", resume_file);
- } else {
- pr_debug("PM: Resume from partition %d:%d\n",
- MAJOR(swsusp_resume_device),
- MINOR(swsusp_resume_device));
+ if (!swsusp_resume_device) {
+ error = -ENODEV;
+ goto Unlock;
+ }
}
- if (noresume) {
- /**
- * FIXME: If noresume is specified, we need to find the
- * partition and reset it back to normal swap space.
- */
- mutex_unlock(&pm_mutex);
- return 0;
- }
+ Check_image:
+ pr_debug("PM: Resume from partition %d:%d\n",
+ MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
pr_debug("PM: Checking hibernation image.\n");
error = swsusp_check();
{
int error;
- device_pm_lock();
+ if (suspend_ops->prepare) {
+ error = suspend_ops->prepare();
+ if (error)
+ return error;
+ }
error = device_power_down(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
- goto Done;
+ goto Platfrom_finish;
}
- if (suspend_ops->prepare) {
- error = suspend_ops->prepare();
+ if (suspend_ops->prepare_late) {
+ error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
- goto Platfrom_finish;
+ goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
Enable_cpus:
enable_nonboot_cpus();
- Platfrom_finish:
- if (suspend_ops->finish)
- suspend_ops->finish();
+ Platform_wake:
+ if (suspend_ops->wake)
+ suspend_ops->wake();
Power_up_devices:
device_power_up(PMSG_RESUME);
- Done:
- device_pm_unlock();
+ Platfrom_finish:
+ if (suspend_ops->finish)
+ suspend_ops->finish();
return error;
}
struct bio *bio;
bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
- if (!bio)
- return -ENOMEM;
bio->bi_sector = page_off * (PAGE_SIZE >> 9);
bio->bi_bdev = resume_bdev;
bio->bi_end_io = end_swap_bio_read;
#include <linux/cpu.h>
#include <linux/freezer.h>
#include <linux/smp_lock.h>
+#include <scsi/scsi_scan.h>
#include <asm/uaccess.h>
filp->private_data = data;
memset(&data->handle, 0, sizeof(struct snapshot_handle));
if ((filp->f_flags & O_ACCMODE) == O_RDONLY) {
+ /* Hibernating. The image device should be accessible. */
data->swap = swsusp_resume_device ?
swap_type_of(swsusp_resume_device, 0, NULL) : -1;
data->mode = O_RDONLY;
if (error)
pm_notifier_call_chain(PM_POST_HIBERNATION);
} else {
+ /*
+ * Resuming. We may need to wait for the image device to
+ * appear.
+ */
+ wait_for_device_probe();
+ scsi_complete_async_scans();
+
data->swap = -1;
data->mode = O_WRONLY;
error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
#include <linux/audit.h>
#include <linux/pid_namespace.h>
#include <linux/syscalls.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
/*
list_add(&child->ptrace_entry, &new_parent->ptraced);
child->parent = new_parent;
}
-
+
/*
* Turn a tracing stop into a normal stop now, since with no tracer there
* would be no way to wake it up with SIGCONT or SIGKILL. If there was a
task_lock(task);
err = __ptrace_may_access(task, mode);
task_unlock(task);
- return (!err ? true : false);
+ return !err;
}
int ptrace_attach(struct task_struct *task)
/* Protect exec's credential calculations against our interference;
* SUID, SGID and LSM creds get determined differently under ptrace.
*/
- retval = mutex_lock_interruptible(¤t->cred_exec_mutex);
+ retval = mutex_lock_interruptible(&task->cred_exec_mutex);
if (retval < 0)
goto out;
bad:
write_unlock_irqrestore(&tasklist_lock, flags);
task_unlock(task);
- mutex_unlock(¤t->cred_exec_mutex);
+ mutex_unlock(&task->cred_exec_mutex);
out:
return retval;
}
if (child->ptrace) {
child->exit_code = data;
dead = __ptrace_detach(current, child);
+ if (!child->exit_state)
+ wake_up_process(child);
}
write_unlock_irq(&tasklist_lock);
copied += retval;
src += retval;
dst += retval;
- len -= retval;
+ len -= retval;
}
return copied;
}
copied += retval;
src += retval;
dst += retval;
- len -= retval;
+ len -= retval;
}
return copied;
}
if (unlikely(!arch_has_single_step()))
return -EIO;
user_enable_single_step(child);
- }
- else
+ } else {
user_disable_single_step(child);
+ }
child->exit_code = data;
wake_up_process(child);
ret = security_ptrace_traceme(current->parent);
/*
- * Set the ptrace bit in the process ptrace flags.
- * Then link us on our parent's ptraced list.
+ * Check PF_EXITING to ensure ->real_parent has not passed
+ * exit_ptrace(). Otherwise we don't report the error but
+ * pretend ->real_parent untraces us right after return.
*/
- if (!ret) {
+ if (!ret && !(current->real_parent->flags & PF_EXITING)) {
current->ptrace |= PT_PTRACED;
__ptrace_link(current, current->real_parent);
}
static struct completion rcu_barrier_completion;
int rcu_scheduler_active __read_mostly;
+static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
+static struct rcu_head rcu_migrate_head[3];
+static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
+
/*
* Awaken the corresponding synchronize_rcu() instance now that a
* grace period has elapsed.
}
}
-static inline void wait_migrated_callbacks(void);
+static inline void wait_migrated_callbacks(void)
+{
+ wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+}
/*
* Orchestrate the specified type of RCU barrier, waiting for all
}
EXPORT_SYMBOL_GPL(rcu_barrier_sched);
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
static void rcu_migrate_callback(struct rcu_head *notused)
{
if (atomic_dec_and_test(&rcu_migrate_type_count))
wake_up(&rcu_migrate_wq);
}
-static inline void wait_migrated_callbacks(void)
-{
- wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
-}
-
static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
unsigned long action, void *hcpu)
{
rdp->qs_pending = 1;
rdp->passed_quiesc = 0;
rdp->gpnum = rsp->gpnum;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
}
/*
rsp->gpnum++;
rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
record_gp_stall_check_time(rsp);
dyntick_record_completed(rsp, rsp->completed - 1);
note_new_gpnum(rsp, rdp);
{
unsigned long flags;
long lastcomp;
- struct rcu_data *rdp = rsp->rda[smp_processor_id()];
struct rcu_node *rnp = rcu_get_root(rsp);
u8 signaled;
return; /* Someone else is already on the job. */
}
if (relaxed &&
- (long)(rsp->jiffies_force_qs - jiffies) >= 0 &&
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0)
+ (long)(rsp->jiffies_force_qs - jiffies) >= 0)
goto unlock_ret; /* no emergency and done recently. */
rsp->n_force_qs++;
spin_lock(&rnp->lock);
lastcomp = rsp->completed;
signaled = rsp->signaled;
rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
if (lastcomp == rsp->gpnum) {
rsp->n_force_qs_ngp++;
spin_unlock(&rnp->lock);
* If an RCU GP has gone long enough, go check for dyntick
* idle CPUs and, if needed, send resched IPIs.
*/
- if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+ if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
/*
if (unlikely(++rdp->qlen > qhimark)) {
rdp->blimit = LONG_MAX;
force_quiescent_state(rsp, 0);
- } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+ } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
local_irq_restore(flags);
}
/* Has an RCU GP gone long enough to send resched IPIs &c? */
if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
- ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0))
+ ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
return 1;
/* nothing to do */
{
if (!rdp->beenonline)
return;
- seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x",
+ seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? '!' : ' ',
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
- rdp->qs_pending,
- rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
- (int)(rdp->n_rcu_pending & 0xffff));
+ rdp->qs_pending);
#ifdef CONFIG_NO_HZ
seq_printf(m, " dt=%d/%d dn=%d df=%lu",
rdp->dynticks->dynticks,
{
if (!rdp->beenonline)
return;
- seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld",
+ seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
- rdp->qs_pending,
- rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
- rdp->n_rcu_pending);
+ rdp->qs_pending);
#ifdef CONFIG_NO_HZ
seq_printf(m, ",%d,%d,%d,%lu",
rdp->dynticks->dynticks,
static int show_rcudata_csv(struct seq_file *m, void *unused)
{
- seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\",");
+ seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",");
#ifdef CONFIG_NO_HZ
seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
res->end = end;
res->flags = IORESOURCE_BUSY;
- for (;;) {
- conflict = __request_resource(parent, res);
- if (!conflict)
- break;
- if (conflict != parent) {
- parent = conflict;
- if (!(conflict->flags & IORESOURCE_BUSY))
- continue;
- }
-
- /* Uhhuh, that didn't work out.. */
- kfree(res);
- res = NULL;
- break;
- }
-
- if (!res) {
- /* failed, split and try again */
-
- /* conflict covered whole area */
- if (conflict->start <= start && conflict->end >= end)
- return;
+ conflict = __request_resource(parent, res);
+ if (!conflict)
+ return;
- if (conflict->start > start)
- __reserve_region_with_split(root, start, conflict->start-1, name);
- if (!(conflict->flags & IORESOURCE_BUSY)) {
- resource_size_t common_start, common_end;
+ /* failed, split and try again */
+ kfree(res);
- common_start = max(conflict->start, start);
- common_end = min(conflict->end, end);
- if (common_start < common_end)
- __reserve_region_with_split(root, common_start, common_end, name);
- }
- if (conflict->end < end)
- __reserve_region_with_split(root, conflict->end+1, end, name);
- }
+ /* conflict covered whole area */
+ if (conflict->start <= start && conflict->end >= end)
+ return;
+ if (conflict->start > start)
+ __reserve_region_with_split(root, start, conflict->start-1, name);
+ if (conflict->end < end)
+ __reserve_region_with_split(root, conflict->end+1, end, name);
}
void __init reserve_region_with_split(struct resource *root,
struct list_head migration_queue;
#endif
+ /* calc_load related fields */
+ unsigned long calc_load_update;
+ long calc_load_active;
+
#ifdef CONFIG_SCHED_HRTICK
#ifdef CONFIG_SMP
int hrtick_csd_pending;
struct rq_iterator *iterator);
#endif
+/* Time spent by the tasks of the cpu accounting group executing in ... */
+enum cpuacct_stat_index {
+ CPUACCT_STAT_USER, /* ... user mode */
+ CPUACCT_STAT_SYSTEM, /* ... kernel mode */
+
+ CPUACCT_STAT_NSTATS,
+};
+
#ifdef CONFIG_CGROUP_CPUACCT
static void cpuacct_charge(struct task_struct *tsk, u64 cputime);
+static void cpuacct_update_stats(struct task_struct *tsk,
+ enum cpuacct_stat_index idx, cputime_t val);
#else
static inline void cpuacct_charge(struct task_struct *tsk, u64 cputime) {}
+static inline void cpuacct_update_stats(struct task_struct *tsk,
+ enum cpuacct_stat_index idx, cputime_t val) {}
#endif
static inline void inc_cpu_load(struct rq *rq, unsigned long load)
}
#endif
+static void calc_load_account_active(struct rq *this_rq);
+
#include "sched_stats.h"
#include "sched_idletask.c"
#include "sched_fair.c"
return success;
}
+/**
+ * wake_up_process - Wake up a specific process
+ * @p: The process to be woken up.
+ *
+ * Attempt to wake up the nominated process and move it to the set of runnable
+ * processes. Returns 1 if the process was woken up, 0 if it was already
+ * running.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
+ */
int wake_up_process(struct task_struct *p)
{
return try_to_wake_up(p, TASK_ALL, 0);
return sum;
}
-unsigned long nr_active(void)
+/* Variables and functions for calc_load */
+static atomic_long_t calc_load_tasks;
+static unsigned long calc_load_update;
+unsigned long avenrun[3];
+EXPORT_SYMBOL(avenrun);
+
+/**
+ * get_avenrun - get the load average array
+ * @loads: pointer to dest load array
+ * @offset: offset to add
+ * @shift: shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
{
- unsigned long i, running = 0, uninterruptible = 0;
+ loads[0] = (avenrun[0] + offset) << shift;
+ loads[1] = (avenrun[1] + offset) << shift;
+ loads[2] = (avenrun[2] + offset) << shift;
+}
- for_each_online_cpu(i) {
- running += cpu_rq(i)->nr_running;
- uninterruptible += cpu_rq(i)->nr_uninterruptible;
- }
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+ load *= exp;
+ load += active * (FIXED_1 - exp);
+ return load >> FSHIFT;
+}
- if (unlikely((long)uninterruptible < 0))
- uninterruptible = 0;
+/*
+ * calc_load - update the avenrun load estimates 10 ticks after the
+ * CPUs have updated calc_load_tasks.
+ */
+void calc_global_load(void)
+{
+ unsigned long upd = calc_load_update + 10;
+ long active;
+
+ if (time_before(jiffies, upd))
+ return;
- return running + uninterruptible;
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
+
+ avenrun[0] = calc_load(avenrun[0], EXP_1, active);
+ avenrun[1] = calc_load(avenrun[1], EXP_5, active);
+ avenrun[2] = calc_load(avenrun[2], EXP_15, active);
+
+ calc_load_update += LOAD_FREQ;
+}
+
+/*
+ * Either called from update_cpu_load() or from a cpu going idle
+ */
+static void calc_load_account_active(struct rq *this_rq)
+{
+ long nr_active, delta;
+
+ nr_active = this_rq->nr_running;
+ nr_active += (long) this_rq->nr_uninterruptible;
+
+ if (nr_active != this_rq->calc_load_active) {
+ delta = nr_active - this_rq->calc_load_active;
+ this_rq->calc_load_active = nr_active;
+ atomic_long_add(delta, &calc_load_tasks);
+ }
}
/*
new_load += scale-1;
this_rq->cpu_load[i] = (old_load*(scale-1) + new_load) >> i;
}
+
+ if (time_after_eq(jiffies, this_rq->calc_load_update)) {
+ this_rq->calc_load_update += LOAD_FREQ;
+ calc_load_account_active(this_rq);
+ }
}
#ifdef CONFIG_SMP
static struct {
atomic_t load_balancer;
cpumask_var_t cpu_mask;
+ cpumask_var_t ilb_grp_nohz_mask;
} nohz ____cacheline_aligned = {
.load_balancer = ATOMIC_INIT(-1),
};
+#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
+/**
+ * lowest_flag_domain - Return lowest sched_domain containing flag.
+ * @cpu: The cpu whose lowest level of sched domain is to
+ * be returned.
+ * @flag: The flag to check for the lowest sched_domain
+ * for the given cpu.
+ *
+ * Returns the lowest sched_domain of a cpu which contains the given flag.
+ */
+static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
+{
+ struct sched_domain *sd;
+
+ for_each_domain(cpu, sd)
+ if (sd && (sd->flags & flag))
+ break;
+
+ return sd;
+}
+
+/**
+ * for_each_flag_domain - Iterates over sched_domains containing the flag.
+ * @cpu: The cpu whose domains we're iterating over.
+ * @sd: variable holding the value of the power_savings_sd
+ * for cpu.
+ * @flag: The flag to filter the sched_domains to be iterated.
+ *
+ * Iterates over all the scheduler domains for a given cpu that has the 'flag'
+ * set, starting from the lowest sched_domain to the highest.
+ */
+#define for_each_flag_domain(cpu, sd, flag) \
+ for (sd = lowest_flag_domain(cpu, flag); \
+ (sd && (sd->flags & flag)); sd = sd->parent)
+
+/**
+ * is_semi_idle_group - Checks if the given sched_group is semi-idle.
+ * @ilb_group: group to be checked for semi-idleness
+ *
+ * Returns: 1 if the group is semi-idle. 0 otherwise.
+ *
+ * We define a sched_group to be semi idle if it has atleast one idle-CPU
+ * and atleast one non-idle CPU. This helper function checks if the given
+ * sched_group is semi-idle or not.
+ */
+static inline int is_semi_idle_group(struct sched_group *ilb_group)
+{
+ cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask,
+ sched_group_cpus(ilb_group));
+
+ /*
+ * A sched_group is semi-idle when it has atleast one busy cpu
+ * and atleast one idle cpu.
+ */
+ if (cpumask_empty(nohz.ilb_grp_nohz_mask))
+ return 0;
+
+ if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group)))
+ return 0;
+
+ return 1;
+}
+/**
+ * find_new_ilb - Finds the optimum idle load balancer for nomination.
+ * @cpu: The cpu which is nominating a new idle_load_balancer.
+ *
+ * Returns: Returns the id of the idle load balancer if it exists,
+ * Else, returns >= nr_cpu_ids.
+ *
+ * This algorithm picks the idle load balancer such that it belongs to a
+ * semi-idle powersavings sched_domain. The idea is to try and avoid
+ * completely idle packages/cores just for the purpose of idle load balancing
+ * when there are other idle cpu's which are better suited for that job.
+ */
+static int find_new_ilb(int cpu)
+{
+ struct sched_domain *sd;
+ struct sched_group *ilb_group;
+
+ /*
+ * Have idle load balancer selection from semi-idle packages only
+ * when power-aware load balancing is enabled
+ */
+ if (!(sched_smt_power_savings || sched_mc_power_savings))
+ goto out_done;
+
+ /*
+ * Optimize for the case when we have no idle CPUs or only one
+ * idle CPU. Don't walk the sched_domain hierarchy in such cases
+ */
+ if (cpumask_weight(nohz.cpu_mask) < 2)
+ goto out_done;
+
+ for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
+ ilb_group = sd->groups;
+
+ do {
+ if (is_semi_idle_group(ilb_group))
+ return cpumask_first(nohz.ilb_grp_nohz_mask);
+
+ ilb_group = ilb_group->next;
+
+ } while (ilb_group != sd->groups);
+ }
+
+out_done:
+ return cpumask_first(nohz.cpu_mask);
+}
+#else /* (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
+static inline int find_new_ilb(int call_cpu)
+{
+ return cpumask_first(nohz.cpu_mask);
+}
+#endif
+
/*
* This routine will try to nominate the ilb (idle load balancing)
* owner among the cpus whose ticks are stopped. ilb owner will do the idle
/* make me the ilb owner */
if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
return 1;
- } else if (atomic_read(&nohz.load_balancer) == cpu)
+ } else if (atomic_read(&nohz.load_balancer) == cpu) {
+ int new_ilb;
+
+ if (!(sched_smt_power_savings ||
+ sched_mc_power_savings))
+ return 1;
+ /*
+ * Check to see if there is a more power-efficient
+ * ilb.
+ */
+ new_ilb = find_new_ilb(cpu);
+ if (new_ilb < nr_cpu_ids && new_ilb != cpu) {
+ atomic_set(&nohz.load_balancer, -1);
+ resched_cpu(new_ilb);
+ return 0;
+ }
return 1;
+ }
} else {
if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
return 0;
}
if (atomic_read(&nohz.load_balancer) == -1) {
- /*
- * simple selection for now: Nominate the
- * first cpu in the nohz list to be the next
- * ilb owner.
- *
- * TBD: Traverse the sched domains and nominate
- * the nearest cpu in the nohz.cpu_mask.
- */
- int ilb = cpumask_first(nohz.cpu_mask);
+ int ilb = find_new_ilb(cpu);
if (ilb < nr_cpu_ids)
resched_cpu(ilb);
EXPORT_PER_CPU_SYMBOL(kstat);
/*
- * Return any ns on the sched_clock that have not yet been banked in
+ * Return any ns on the sched_clock that have not yet been accounted in
* @p in case that task is currently running.
+ *
+ * Called with task_rq_lock() held on @rq.
*/
+static u64 do_task_delta_exec(struct task_struct *p, struct rq *rq)
+{
+ u64 ns = 0;
+
+ if (task_current(rq, p)) {
+ update_rq_clock(rq);
+ ns = rq->clock - p->se.exec_start;
+ if ((s64)ns < 0)
+ ns = 0;
+ }
+
+ return ns;
+}
+
unsigned long long task_delta_exec(struct task_struct *p)
{
unsigned long flags;
u64 ns = 0;
rq = task_rq_lock(p, &flags);
+ ns = do_task_delta_exec(p, rq);
+ task_rq_unlock(rq, &flags);
- if (task_current(rq, p)) {
- u64 delta_exec;
+ return ns;
+}
- update_rq_clock(rq);
- delta_exec = rq->clock - p->se.exec_start;
- if ((s64)delta_exec > 0)
- ns = delta_exec;
- }
+/*
+ * Return accounted runtime for the task.
+ * In case the task is currently running, return the runtime plus current's
+ * pending runtime that have not been accounted yet.
+ */
+unsigned long long task_sched_runtime(struct task_struct *p)
+{
+ unsigned long flags;
+ struct rq *rq;
+ u64 ns = 0;
+ rq = task_rq_lock(p, &flags);
+ ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq);
+ task_rq_unlock(rq, &flags);
+
+ return ns;
+}
+
+/*
+ * Return sum_exec_runtime for the thread group.
+ * In case the task is currently running, return the sum plus current's
+ * pending runtime that have not been accounted yet.
+ *
+ * Note that the thread group might have other running tasks as well,
+ * so the return value not includes other pending runtime that other
+ * running tasks might have.
+ */
+unsigned long long thread_group_sched_runtime(struct task_struct *p)
+{
+ struct task_cputime totals;
+ unsigned long flags;
+ struct rq *rq;
+ u64 ns;
+
+ rq = task_rq_lock(p, &flags);
+ thread_group_cputime(p, &totals);
+ ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
task_rq_unlock(rq, &flags);
return ns;
cpustat->nice = cputime64_add(cpustat->nice, tmp);
else
cpustat->user = cputime64_add(cpustat->user, tmp);
+
+ cpuacct_update_stats(p, CPUACCT_STAT_USER, cputime);
/* Account for user time used */
acct_update_integrals(p);
}
else
cpustat->system = cputime64_add(cpustat->system, tmp);
+ cpuacct_update_stats(p, CPUACCT_STAT_SYSTEM, cputime);
+
/* Account for system time used */
acct_update_integrals(p);
}
if (user_tick)
account_user_time(p, one_jiffy, one_jiffy_scaled);
- else if (p != rq->idle)
+ else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
account_system_time(p, HARDIRQ_OFFSET, one_jiffy,
one_jiffy_scaled);
else
#endif
}
-unsigned long get_parent_ip(unsigned long addr)
+notrace unsigned long get_parent_ip(unsigned long addr)
{
if (in_lock_functions(addr)) {
addr = CALLER_ADDR2;
/*
* schedule() is the main scheduler function.
*/
-asmlinkage void __sched __schedule(void)
+asmlinkage void __sched schedule(void)
{
struct task_struct *prev, *next;
unsigned long *switch_count;
struct rq *rq;
int cpu;
+need_resched:
+ preempt_disable();
cpu = smp_processor_id();
rq = cpu_rq(cpu);
rcu_qsctr_inc(cpu);
if (unlikely(reacquire_kernel_lock(current) < 0))
goto need_resched_nonpreemptible;
-}
-asmlinkage void __sched schedule(void)
-{
-need_resched:
- preempt_disable();
- __schedule();
preempt_enable_no_resched();
- if (unlikely(test_thread_flag(TIF_NEED_RESCHED)))
+ if (need_resched())
goto need_resched;
}
EXPORT_SYMBOL(schedule);
* started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
* zero in this (rare) case, and we handle it by continuing to scan the queue.
*/
-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, int sync, void *key)
{
wait_queue_t *curr, *next;
* @mode: which threads
* @nr_exclusive: how many wake-one or wake-many threads to wake up
* @key: is directly passed to the wakeup function
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void __wake_up(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
* with each other. This can prevent needless bouncing between CPUs.
*
* On UP it can prevent extra preemption.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
* awakened in the same order in which they were queued.
*
* See also complete_all(), wait_for_completion() and related routines.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void complete(struct completion *x)
{
* @x: holds the state of this particular completion
*
* This will wake up all threads waiting on this particular completion event.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void complete_all(struct completion *x)
{
#ifdef CONFIG_DEBUG_STACK_USAGE
free = stack_not_used(p);
#endif
- printk(KERN_CONT "%5lu %5d %6d\n", free,
- task_pid_nr(p), task_pid_nr(p->real_parent));
+ printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
+ task_pid_nr(p), task_pid_nr(p->real_parent),
+ (unsigned long)task_thread_info(p)->flags);
show_stack(p, NULL);
}
}
}
+
+/*
+ * remove the tasks which were accounted by rq from calc_load_tasks.
+ */
+static void calc_global_load_remove(struct rq *rq)
+{
+ atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+}
#endif /* CONFIG_HOTPLUG_CPU */
#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
/* Update our root-domain */
rq = cpu_rq(cpu);
spin_lock_irqsave(&rq->lock, flags);
+ rq->calc_load_update = calc_load_update;
+ rq->calc_load_active = 0;
if (rq->rd) {
BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
cpuset_unlock();
migrate_nr_uninterruptible(rq);
BUG_ON(rq->nr_running != 0);
-
+ calc_global_load_remove(rq);
/*
* No need to migrate the tasks: it was best-effort if
* they didn't take sched_hotcpu_mutex. Just wake up
cpumask_or(groupmask, groupmask, sched_group_cpus(group));
cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
+
printk(KERN_CONT " %s", str);
+ if (group->__cpu_power != SCHED_LOAD_SCALE) {
+ printk(KERN_CONT " (__cpu_power = %d)",
+ group->__cpu_power);
+ }
group = group->next;
} while (group != sd->groups);
/*
* The cpus mask in sched_group and sched_domain hangs off the end.
- * FIXME: use cpumask_var_t or dynamic percpu alloc to avoid wasting space
- * for nr_cpu_ids < CONFIG_NR_CPUS.
+ *
+ * ( See the the comments in include/linux/sched.h:struct sched_group
+ * and struct sched_domain. )
*/
struct static_sched_group {
struct sched_group sg;
struct sched_domain *sd;
sd = &per_cpu(phys_domains, j).sd;
- if (j != cpumask_first(sched_group_cpus(sd->groups))) {
+ if (j != group_first_cpu(sd->groups)) {
/*
* Only add "power" once for each
* physical package.
WARN_ON(!sd || !sd->groups);
- if (cpu != cpumask_first(sched_group_cpus(sd->groups)))
+ if (cpu != group_first_cpu(sd->groups))
return;
child = sd->child;
rq = cpu_rq(i);
spin_lock_init(&rq->lock);
rq->nr_running = 0;
+ rq->calc_load_active = 0;
+ rq->calc_load_update = jiffies + LOAD_FREQ;
init_cfs_rq(&rq->cfs, rq);
init_rt_rq(&rq->rt, rq);
#ifdef CONFIG_FAIR_GROUP_SCHED
* when this runqueue becomes "idle".
*/
init_idle(current, smp_processor_id());
+
+ calc_load_update = jiffies + LOAD_FREQ;
+
/*
* During early bootup we pretend to be a normal task:
*/
#ifdef CONFIG_SMP
#ifdef CONFIG_NO_HZ
alloc_bootmem_cpumask_var(&nohz.cpu_mask);
+ alloc_bootmem_cpumask_var(&nohz.ilb_grp_nohz_mask);
#endif
alloc_bootmem_cpumask_var(&cpu_isolated_map);
#endif /* SMP */
if (sysctl_sched_rt_period <= 0)
return -EINVAL;
+ /*
+ * There's always some RT tasks in the root group
+ * -- migration, kstopmachine etc..
+ */
+ if (sysctl_sched_rt_runtime == 0)
+ return -EBUSY;
+
spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
for_each_possible_cpu(i) {
struct rt_rq *rt_rq = &cpu_rq(i)->rt;
struct cgroup_subsys_state css;
/* cpuusage holds pointer to a u64-type object on every cpu */
u64 *cpuusage;
+ struct percpu_counter cpustat[CPUACCT_STAT_NSTATS];
struct cpuacct *parent;
};
struct cgroup_subsys *ss, struct cgroup *cgrp)
{
struct cpuacct *ca = kzalloc(sizeof(*ca), GFP_KERNEL);
+ int i;
if (!ca)
- return ERR_PTR(-ENOMEM);
+ goto out;
ca->cpuusage = alloc_percpu(u64);
- if (!ca->cpuusage) {
- kfree(ca);
- return ERR_PTR(-ENOMEM);
- }
+ if (!ca->cpuusage)
+ goto out_free_ca;
+
+ for (i = 0; i < CPUACCT_STAT_NSTATS; i++)
+ if (percpu_counter_init(&ca->cpustat[i], 0))
+ goto out_free_counters;
if (cgrp->parent)
ca->parent = cgroup_ca(cgrp->parent);
return &ca->css;
+
+out_free_counters:
+ while (--i >= 0)
+ percpu_counter_destroy(&ca->cpustat[i]);
+ free_percpu(ca->cpuusage);
+out_free_ca:
+ kfree(ca);
+out:
+ return ERR_PTR(-ENOMEM);
}
/* destroy an existing cpu accounting group */
cpuacct_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp)
{
struct cpuacct *ca = cgroup_ca(cgrp);
+ int i;
+ for (i = 0; i < CPUACCT_STAT_NSTATS; i++)
+ percpu_counter_destroy(&ca->cpustat[i]);
free_percpu(ca->cpuusage);
kfree(ca);
}
return 0;
}
+static const char *cpuacct_stat_desc[] = {
+ [CPUACCT_STAT_USER] = "user",
+ [CPUACCT_STAT_SYSTEM] = "system",
+};
+
+static int cpuacct_stats_show(struct cgroup *cgrp, struct cftype *cft,
+ struct cgroup_map_cb *cb)
+{
+ struct cpuacct *ca = cgroup_ca(cgrp);
+ int i;
+
+ for (i = 0; i < CPUACCT_STAT_NSTATS; i++) {
+ s64 val = percpu_counter_read(&ca->cpustat[i]);
+ val = cputime64_to_clock_t(val);
+ cb->fill(cb, cpuacct_stat_desc[i], val);
+ }
+ return 0;
+}
+
static struct cftype files[] = {
{
.name = "usage",
.name = "usage_percpu",
.read_seq_string = cpuacct_percpu_seq_read,
},
-
+ {
+ .name = "stat",
+ .read_map = cpuacct_stats_show,
+ },
};
static int cpuacct_populate(struct cgroup_subsys *ss, struct cgroup *cgrp)
return;
cpu = task_cpu(tsk);
+
+ rcu_read_lock();
+
ca = task_ca(tsk);
for (; ca; ca = ca->parent) {
u64 *cpuusage = per_cpu_ptr(ca->cpuusage, cpu);
*cpuusage += cputime;
}
+
+ rcu_read_unlock();
+}
+
+/*
+ * Charge the system/user time to the task's accounting group.
+ */
+static void cpuacct_update_stats(struct task_struct *tsk,
+ enum cpuacct_stat_index idx, cputime_t val)
+{
+ struct cpuacct *ca;
+
+ if (unlikely(!cpuacct_subsys.active))
+ return;
+
+ rcu_read_lock();
+ ca = task_ca(tsk);
+
+ do {
+ percpu_counter_add(&ca->cpustat[idx], val);
+ ca = ca->parent;
+ } while (ca);
+ rcu_read_unlock();
}
struct cgroup_subsys cpuacct_subsys = {
*/
unsigned long long __attribute__((weak)) sched_clock(void)
{
- return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+ return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+ * (NSEC_PER_SEC / HZ);
}
static __read_mostly int sched_clock_running;
* cpupri_find - find the best (lowest-pri) CPU in the system
* @cp: The cpupri context
* @p: The task
- * @lowest_mask: A mask to fill in with selected CPUs
+ * @lowest_mask: A mask to fill in with selected CPUs (or NULL)
*
* Note: This function returns the recommended CPUs as calculated during the
* current invokation. By the time the call returns, the CPUs may have in
if (cpumask_any_and(&p->cpus_allowed, vec->mask) >= nr_cpu_ids)
continue;
- cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask);
+ if (lowest_mask)
+ cpumask_and(lowest_mask, &p->cpus_allowed, vec->mask);
return 1;
}
vec->count = 0;
if (bootmem)
alloc_bootmem_cpumask_var(&vec->mask);
- else if (!alloc_cpumask_var(&vec->mask, GFP_KERNEL))
+ else if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL))
goto cleanup;
}
find_matching_se(&se, &pse);
- while (se) {
- BUG_ON(!pse);
+ BUG_ON(!pse);
- if (wakeup_preempt_entity(se, pse) == 1) {
- resched_task(curr);
- break;
- }
-
- se = parent_entity(se);
- pse = parent_entity(pse);
- }
+ if (wakeup_preempt_entity(se, pse) == 1)
+ resched_task(curr);
}
static struct task_struct *pick_next_task_fair(struct rq *rq)
static struct task_struct *pick_next_task_idle(struct rq *rq)
{
schedstat_inc(rq, sched_goidle);
-
+ /* adjust the active tasks as we might go into a long sleep */
+ calc_load_account_active(rq);
return rq->idle;
}
static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
{
- cpumask_var_t mask;
-
if (rq->curr->rt.nr_cpus_allowed == 1)
return;
- if (!alloc_cpumask_var(&mask, GFP_ATOMIC))
- return;
-
if (p->rt.nr_cpus_allowed != 1
- && cpupri_find(&rq->rd->cpupri, p, mask))
- goto free;
+ && cpupri_find(&rq->rd->cpupri, p, NULL))
+ return;
- if (!cpupri_find(&rq->rd->cpupri, rq->curr, mask))
- goto free;
+ if (!cpupri_find(&rq->rd->cpupri, rq->curr, NULL))
+ return;
/*
* There appears to be other cpus that can accept
*/
requeue_task_rt(rq, p, 1);
resched_task(rq->curr);
-free:
- free_cpumask_var(mask);
}
#endif /* CONFIG_SMP */
unsigned int i;
for_each_possible_cpu(i)
- alloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
+ zalloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
GFP_KERNEL, cpu_to_node(i));
}
#endif /* CONFIG_SMP */
if (slow_work_user_count == 0) {
printk(KERN_NOTICE "Slow work thread pool: Shutting down\n");
slow_work_threads_should_exit = true;
+ del_timer_sync(&slow_work_cull_timer);
+ del_timer_sync(&slow_work_oom_timer);
wake_up_all(&slow_work_thread_wq);
wait_for_completion(&slow_work_last_thread_exited);
printk(KERN_NOTICE "Slow work thread pool:"
" Shut down complete\n");
}
- del_timer_sync(&slow_work_cull_timer);
-
mutex_unlock(&slow_work_user_lock);
}
EXPORT_SYMBOL(slow_work_unregister_user);
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (!alloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
+ if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
cpu_to_node(cpu)))
return NOTIFY_BAD;
break;
printk("Attempt to kill tasklet from interrupt\n");
while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
- do
+ do {
yield();
- while (test_bit(TASKLET_STATE_SCHED, &t->state));
+ } while (test_bit(TASKLET_STATE_SCHED, &t->state));
}
tasklet_unlock_wait(t);
clear_bit(TASKLET_STATE_SCHED, &t->state);
return 0;
}
-int __weak arch_init_chip_data(struct irq_desc *desc, int cpu)
+int __weak arch_init_chip_data(struct irq_desc *desc, int node)
{
return 0;
}
void __user *, arg)
{
char buffer[256];
+ int ret = 0;
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT))
kernel_halt();
unlock_kernel();
do_exit(0);
- break;
+ panic("cannot halt");
case LINUX_REBOOT_CMD_POWER_OFF:
kernel_power_off();
#ifdef CONFIG_KEXEC
case LINUX_REBOOT_CMD_KEXEC:
- {
- int ret;
- ret = kernel_kexec();
- unlock_kernel();
- return ret;
- }
+ ret = kernel_kexec();
+ break;
#endif
#ifdef CONFIG_HIBERNATION
case LINUX_REBOOT_CMD_SW_SUSPEND:
- {
- int ret = hibernate();
- unlock_kernel();
- return ret;
- }
+ ret = hibernate();
+ break;
#endif
default:
- unlock_kernel();
- return -EINVAL;
+ ret = -EINVAL;
+ break;
}
unlock_kernel();
- return 0;
+ return ret;
}
static void deferred_cad(struct work_struct *dummy)
static int __maybe_unused two = 2;
static unsigned long one_ul = 1;
static int one_hundred = 100;
-static int one_thousand = 1000;
+
+/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
.mode = 0444,
.proc_handler = &proc_dointvec,
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "bootloader_version",
+ .data = &bootloader_version,
+ .maxlen = sizeof (int),
+ .mode = 0444,
+ .proc_handler = &proc_dointvec,
+ },
{
.ctl_name = CTL_UNNUMBERED,
.procname = "kstack_depth_to_print",
.proc_handler = &proc_dointvec,
},
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "scan_unevictable_pages",
- .data = &scan_unevictable_pages,
- .maxlen = sizeof(scan_unevictable_pages),
- .mode = 0644,
- .proc_handler = &scan_unevictable_handler,
- },
-#endif
#ifdef CONFIG_SLOW_WORK
{
.ctl_name = CTL_UNNUMBERED,
.mode = 0644,
.proc_handler = &dirty_bytes_handler,
.strategy = &sysctl_intvec,
- .extra1 = &one_ul,
+ .extra1 = &dirty_bytes_min,
},
{
.procname = "dirty_writeback_centisecs",
.mode = 0444 /* read-only*/,
.proc_handler = &proc_dointvec,
},
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "nr_pdflush_threads_min",
- .data = &nr_pdflush_threads_min,
- .maxlen = sizeof nr_pdflush_threads_min,
- .mode = 0644 /* read-write */,
- .proc_handler = &proc_dointvec_minmax,
- .strategy = &sysctl_intvec,
- .extra1 = &one,
- .extra2 = &nr_pdflush_threads_max,
- },
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "nr_pdflush_threads_max",
- .data = &nr_pdflush_threads_max,
- .maxlen = sizeof nr_pdflush_threads_max,
- .mode = 0644 /* read-write */,
- .proc_handler = &proc_dointvec_minmax,
- .strategy = &sysctl_intvec,
- .extra1 = &nr_pdflush_threads_min,
- .extra2 = &one_thousand,
- },
{
.ctl_name = VM_SWAPPINESS,
.procname = "swappiness",
.extra2 = &one,
},
#endif
+#ifdef CONFIG_UNEVICTABLE_LRU
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "scan_unevictable_pages",
+ .data = &scan_unevictable_pages,
+ .maxlen = sizeof(scan_unevictable_pages),
+ .mode = 0644,
+ .proc_handler = &scan_unevictable_handler,
+ },
+#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
resumed = test_and_clear_bit(0, &watchdog_resumed);
- wdnow = watchdog->read();
+ wdnow = watchdog->read(watchdog);
wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
watchdog_last = wdnow;
list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
- csnow = cs->read();
+ csnow = cs->read(cs);
if (unlikely(resumed)) {
cs->wd_last = csnow;
list_add(&cs->wd_list, &watchdog_list);
if (!started && watchdog) {
- watchdog_last = watchdog->read();
+ watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer,
cpumask_first(cpu_online_mask));
cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
/* Start if list is not empty */
if (!list_empty(&watchdog_list)) {
- watchdog_last = watchdog->read();
+ watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires =
jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer,
*/
#define JIFFIES_SHIFT 8
-static cycle_t jiffies_read(void)
+static cycle_t jiffies_read(struct clocksource *cs)
{
return (cycle_t) jiffies;
}
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
- tick_periodic(cpu);
+ /*
+ * Have to be careful here. If we're in oneshot mode,
+ * before we call tick_periodic() in a loop, we need
+ * to be sure we're using a real hardware clocksource.
+ * Otherwise we could get trapped in an infinite
+ * loop, as the tick_periodic() increments jiffies,
+ * when then will increment time, posibly causing
+ * the loop to trigger again and again.
+ */
+ if (timekeeping_valid_for_hres())
+ tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
/*
* This read-write spinlock protects us from races in SMP while
- * playing with xtime and avenrun.
+ * playing with xtime.
*/
__cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
*/
static void change_clocksource(void)
{
- struct clocksource *new;
+ struct clocksource *new, *old;
new = clocksource_get_next();
clocksource_forward_now();
- new->raw_time = clock->raw_time;
+ if (clocksource_enable(new))
+ return;
+ new->raw_time = clock->raw_time;
+ old = clock;
clock = new;
+ clocksource_disable(old);
+
clock->cycle_last = 0;
- clock->cycle_last = clocksource_read(new);
+ clock->cycle_last = clocksource_read(clock);
clock->error = 0;
clock->xtime_nsec = 0;
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
ntp_init();
clock = clocksource_get_next();
+ clocksource_enable(clock);
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
clock->cycle_last = clocksource_read(clock);
}
/**
- * init_timer - initialize a timer.
+ * init_timer_key - initialize a timer
* @timer: the timer to be initialized
+ * @name: name of the timer
+ * @key: lockdep class key of the fake lock used for tracking timer
+ * sync lock dependencies
*
- * init_timer() must be done to a timer prior calling *any* of the
+ * init_timer_key() must be done to a timer prior calling *any* of the
* other timer functions.
*/
void init_timer_key(struct timer_list *timer,
run_posix_cpu_timers(p);
}
-/*
- * Nr of active tasks - counted in fixed-point numbers
- */
-static unsigned long count_active_tasks(void)
-{
- return nr_active() * FIXED_1;
-}
-
-/*
- * Hmm.. Changed this, as the GNU make sources (load.c) seems to
- * imply that avenrun[] is the standard name for this kind of thing.
- * Nothing else seems to be standardized: the fractional size etc
- * all seem to differ on different machines.
- *
- * Requires xtime_lock to access.
- */
-unsigned long avenrun[3];
-
-EXPORT_SYMBOL(avenrun);
-
-/*
- * calc_load - given tick count, update the avenrun load estimates.
- * This is called while holding a write_lock on xtime_lock.
- */
-static inline void calc_load(unsigned long ticks)
-{
- unsigned long active_tasks; /* fixed-point */
- static int count = LOAD_FREQ;
-
- count -= ticks;
- if (unlikely(count < 0)) {
- active_tasks = count_active_tasks();
- do {
- CALC_LOAD(avenrun[0], EXP_1, active_tasks);
- CALC_LOAD(avenrun[1], EXP_5, active_tasks);
- CALC_LOAD(avenrun[2], EXP_15, active_tasks);
- count += LOAD_FREQ;
- } while (count < 0);
- }
-}
-
/*
* This function runs timers and the timer-tq in bottom half context.
*/
softlockup_tick();
}
-/*
- * Called by the timer interrupt. xtime_lock must already be taken
- * by the timer IRQ!
- */
-static inline void update_times(unsigned long ticks)
-{
- update_wall_time();
- calc_load(ticks);
-}
-
/*
* The 64-bit jiffies value is not atomic - you MUST NOT read it
* without sampling the sequence number in xtime_lock.
void do_timer(unsigned long ticks)
{
jiffies_64 += ticks;
- update_times(ticks);
+ update_wall_time();
+ calc_global_load();
}
#ifdef __ARCH_WANT_SYS_ALARM
{
unsigned long mem_total, sav_total;
unsigned int mem_unit, bitcount;
- unsigned long seq;
+ struct timespec tp;
memset(info, 0, sizeof(struct sysinfo));
- do {
- struct timespec tp;
- seq = read_seqbegin(&xtime_lock);
-
- /*
- * This is annoying. The below is the same thing
- * posix_get_clock_monotonic() does, but it wants to
- * take the lock which we want to cover the loads stuff
- * too.
- */
-
- getnstimeofday(&tp);
- tp.tv_sec += wall_to_monotonic.tv_sec;
- tp.tv_nsec += wall_to_monotonic.tv_nsec;
- monotonic_to_bootbased(&tp);
- if (tp.tv_nsec - NSEC_PER_SEC >= 0) {
- tp.tv_nsec = tp.tv_nsec - NSEC_PER_SEC;
- tp.tv_sec++;
- }
- info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
+ ktime_get_ts(&tp);
+ monotonic_to_bootbased(&tp);
+ info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
- info->loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT);
- info->loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT);
- info->loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT);
+ get_avenrun(info->loads, 0, SI_LOAD_SHIFT - FSHIFT);
- info->procs = nr_threads;
- } while (read_seqretry(&xtime_lock, seq));
+ info->procs = nr_threads;
si_meminfo(info);
si_swapinfo(info);
and profile kernel code.
This requires an userspace application to use. See
- Documentation/vm/kmemtrace.txt for more information.
+ Documentation/trace/kmemtrace.txt for more information.
Saying Y will make the kernel somewhat larger and slower. However,
if you disable kmemtrace at run-time or boot-time, the performance
implementation and works via page faults. Tracing is disabled by
default and can be enabled at run-time.
- See Documentation/tracers/mmiotrace.txt.
+ See Documentation/trace/mmiotrace.txt.
If you are not helping to develop drivers, say N.
config MMIOTRACE_TEST
{
int i;
int mask = 0;
- char *s, *token;
+ char *buf, *s, *token;
- s = kstrdup(str, GFP_KERNEL);
- if (s == NULL)
+ buf = kstrdup(str, GFP_KERNEL);
+ if (buf == NULL)
return -ENOMEM;
- s = strstrip(s);
+ s = strstrip(buf);
while (1) {
token = strsep(&s, ",");
break;
}
}
- kfree(s);
+ kfree(buf);
return mask;
}
"# echo print-parent > /debug/tracing/trace_options\n"
"# echo 1 > /debug/tracing/tracing_enabled\n"
"# cat /debug/tracing/trace > /tmp/trace.txt\n"
- "echo 0 > /debug/tracing/tracing_enabled\n"
+ "# echo 0 > /debug/tracing/tracing_enabled\n"
;
static ssize_t
info->tr = &global_trace;
info->cpu = cpu;
- info->spare = ring_buffer_alloc_read_page(info->tr->buffer);
+ info->spare = NULL;
/* Force reading ring buffer for first read */
info->read = (unsigned int)-1;
- if (!info->spare)
- goto out;
filp->private_data = info;
- return 0;
-
- out:
- kfree(info);
- return -ENOMEM;
+ return nonseekable_open(inode, filp);
}
static ssize_t
if (!count)
return 0;
+ if (!info->spare)
+ info->spare = ring_buffer_alloc_read_page(info->tr->buffer);
+ if (!info->spare)
+ return -ENOMEM;
+
/* Do we have previous read data to read? */
if (info->read < PAGE_SIZE)
goto read;
{
struct ftrace_buffer_info *info = file->private_data;
- ring_buffer_free_read_page(info->tr->buffer, info->spare);
+ if (info->spare)
+ ring_buffer_free_read_page(info->tr->buffer, info->spare);
kfree(info);
return 0;
int size, i;
size_t ret;
- /*
- * We can't seek on a buffer input
- */
- if (unlikely(*ppos))
- return -ESPIPE;
+ if (*ppos & (PAGE_SIZE - 1)) {
+ WARN_ONCE(1, "Ftrace: previous read must page-align\n");
+ return -EINVAL;
+ }
+ if (len & (PAGE_SIZE - 1)) {
+ WARN_ONCE(1, "Ftrace: splice_read should page-align\n");
+ if (len < PAGE_SIZE)
+ return -EINVAL;
+ len &= PAGE_MASK;
+ }
- for (i = 0; i < PIPE_BUFFERS && len; i++, len -= size) {
+ for (i = 0; i < PIPE_BUFFERS && len; i++, len -= PAGE_SIZE) {
struct page *page;
int r;
if (!ref)
break;
+ ref->ref = 1;
ref->buffer = info->tr->buffer;
ref->page = ring_buffer_alloc_read_page(ref->buffer);
if (!ref->page) {
spd.partial[i].offset = 0;
spd.partial[i].private = (unsigned long)ref;
spd.nr_pages++;
+ *ppos += PAGE_SIZE;
}
spd.nr_pages = i;
return TRACE_TYPE_HANDLED;
}
+static void branch_print_header(struct seq_file *s)
+{
+ seq_puts(s, "# TASK-PID CPU# TIMESTAMP CORRECT"
+ " FUNC:FILE:LINE\n");
+ seq_puts(s, "# | | | | | "
+ " |\n");
+}
static struct trace_event trace_branch_event = {
.type = TRACE_BRANCH,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_branch,
#endif /* CONFIG_FTRACE_SELFTEST */
+ .print_header = branch_print_header,
};
__init static int init_branch_tracer(void)
if (copy_from_user(&buf, ubuf, cnt))
return -EFAULT;
+ buf[cnt] = '\0';
pred = kzalloc(sizeof(*pred), GFP_KERNEL);
if (!pred)
return cnt;
}
- if (filter_add_pred(call, pred)) {
+ err = filter_add_pred(call, pred);
+ if (err < 0) {
filter_free_pred(pred);
- return -EINVAL;
+ return err;
}
*ppos += cnt;
if (copy_from_user(&buf, ubuf, cnt))
return -EFAULT;
+ buf[cnt] = '\0';
pred = kzalloc(sizeof(*pred), GFP_KERNEL);
if (!pred)
return cnt;
}
- if (filter_add_subsystem_pred(system, pred)) {
+ err = filter_add_subsystem_pred(system, pred);
+ if (err < 0) {
filter_free_subsystem_preds(system);
filter_free_pred(pred);
- return -EINVAL;
+ return err;
}
*ppos += cnt;
}
}
- return -ENOMEM;
+ return -ENOSPC;
}
static int is_string_field(const char *type)
}
if (i == MAX_FILTER_PRED)
- return -EINVAL;
+ return -ENOSPC;
events_for_each(call) {
int err;
}
}
+ if (!val_str) {
+ pred->field_name = NULL;
+ return -EINVAL;
+ }
+
pred->field_name = kstrdup(pred->field_name, GFP_KERNEL);
if (!pred->field_name)
return -ENOMEM;
- pred->val = simple_strtoull(val_str, &tmp, 10);
+ pred->val = simple_strtoull(val_str, &tmp, 0);
if (tmp == val_str) {
pred->str_val = kstrdup(val_str, GFP_KERNEL);
if (!pred->str_val)
return -ENOMEM;
- }
+ } else if (*tmp != '\0')
+ return -EINVAL;
return 0;
}
return 0;
#undef __entry
-#define __entry "REC"
+#define __entry REC
#undef TP_printk
-#define TP_printk(fmt, args...) "%s, %s\n", #fmt, #args
+#define TP_printk(fmt, args...) "%s, %s\n", #fmt, __stringify(args)
#undef TP_fast_assign
#define TP_fast_assign(args...) args
return TRACE_TYPE_UNHANDLED;
}
+static void power_print_header(struct seq_file *s)
+{
+ seq_puts(s, "# TIMESTAMP STATE EVENT\n");
+ seq_puts(s, "# | | |\n");
+}
+
static struct tracer power_tracer __read_mostly =
{
.name = "power",
.stop = stop_power_trace,
.reset = power_trace_reset,
.print_line = power_print_line,
+ .print_header = power_print_header,
};
static int init_power_trace(void)
+#include <trace/syscall.h>
#include <linux/kernel.h>
-#include <linux/ftrace.h>
#include <asm/syscall.h>
#include "trace_output.h"
if (!list_empty(&wait->task_list))
list_del_init(&wait->task_list);
else if (waitqueue_active(q))
- __wake_up_common(q, mode, 1, 0, key);
+ __wake_up_locked_key(q, mode, key);
spin_unlock_irqrestore(&q->lock, flags);
}
EXPORT_SYMBOL(abort_exclusive_wait);
}
#ifdef CONFIG_SMP
-static struct workqueue_struct *work_on_cpu_wq __read_mostly;
struct work_for_cpu {
- struct work_struct work;
+ struct completion completion;
long (*fn)(void *);
void *arg;
long ret;
};
-static void do_work_for_cpu(struct work_struct *w)
+static int do_work_for_cpu(void *_wfc)
{
- struct work_for_cpu *wfc = container_of(w, struct work_for_cpu, work);
-
+ struct work_for_cpu *wfc = _wfc;
wfc->ret = wfc->fn(wfc->arg);
+ complete(&wfc->completion);
+ return 0;
}
/**
*
* This will return the value @fn returns.
* It is up to the caller to ensure that the cpu doesn't go offline.
+ * The caller must not hold any locks which would prevent @fn from completing.
*/
long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg)
{
- struct work_for_cpu wfc;
-
- INIT_WORK(&wfc.work, do_work_for_cpu);
- wfc.fn = fn;
- wfc.arg = arg;
- queue_work_on(cpu, work_on_cpu_wq, &wfc.work);
- flush_work(&wfc.work);
-
+ struct task_struct *sub_thread;
+ struct work_for_cpu wfc = {
+ .completion = COMPLETION_INITIALIZER_ONSTACK(wfc.completion),
+ .fn = fn,
+ .arg = arg,
+ };
+
+ sub_thread = kthread_create(do_work_for_cpu, &wfc, "work_for_cpu");
+ if (IS_ERR(sub_thread))
+ return PTR_ERR(sub_thread);
+ kthread_bind(sub_thread, cpu);
+ wake_up_process(sub_thread);
+ wait_for_completion(&wfc.completion);
return wfc.ret;
}
EXPORT_SYMBOL_GPL(work_on_cpu);
hotcpu_notifier(workqueue_cpu_callback, 0);
keventd_wq = create_workqueue("events");
BUG_ON(!keventd_wq);
-#ifdef CONFIG_SMP
- work_on_cpu_wq = create_workqueue("work_on_cpu");
- BUG_ON(!work_on_cpu_wq);
-#endif
}
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390
select KALLSYMS
select KALLSYMS_ALL
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && \
- (CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+ (CRIS || M68K || M68KNOMMU || FRV || UML || \
AVR32 || SUPERH || BLACKFIN || MN10300) || \
ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !PPC
+ select FRAME_POINTER if !PPC && !S390
help
Provide stacktrace filter for fault-injection capabilities
config LATENCYTOP
bool "Latency measuring infrastructure"
- select FRAME_POINTER if !MIPS && !PPC
+ select FRAME_POINTER if !MIPS && !PPC && !S390
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
default n
depends on PRINTK
depends on DEBUG_FS
- select PRINTK_DEBUG
help
Compiles debug level messages into the kernel, which would not
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o
lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
+obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
}
EXPORT_SYMBOL(alloc_cpumask_var_node);
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
+{
+ return alloc_cpumask_var_node(mask, flags | __GFP_ZERO, node);
+}
+EXPORT_SYMBOL(zalloc_cpumask_var_node);
+
/**
* alloc_cpumask_var - allocate a struct cpumask
* @mask: pointer to cpumask_var_t where the cpumask is returned
}
EXPORT_SYMBOL(alloc_cpumask_var);
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+ return alloc_cpumask_var(mask, flags | __GFP_ZERO);
+}
+EXPORT_SYMBOL(zalloc_cpumask_var);
+
/**
* alloc_bootmem_cpumask_var - allocate a struct cpumask from the bootmem arena.
* @mask: pointer to cpumask_var_t where the cpumask is returned
*/
int debug_locks_off(void)
{
- if (xchg(&debug_locks, 0)) {
+ if (__debug_locks_off()) {
if (!debug_locks_silent) {
oops_in_progress = 1;
console_verbose();
return -ENOMEM;
}
-static int device_dma_allocations(struct device *dev)
-{
- struct dma_debug_entry *entry;
- unsigned long flags;
- int count = 0, i;
-
- for (i = 0; i < HASH_SIZE; ++i) {
- spin_lock_irqsave(&dma_entry_hash[i].lock, flags);
- list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
- if (entry->dev == dev)
- count += 1;
- }
- spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags);
- }
-
- return count;
-}
-
-static int dma_debug_device_change(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- int count;
-
-
- switch (action) {
- case BUS_NOTIFY_UNBIND_DRIVER:
- count = device_dma_allocations(dev);
- if (count == 0)
- break;
- err_printk(dev, NULL, "DMA-API: device driver has pending "
- "DMA allocations while released from device "
- "[count=%d]\n", count);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
void dma_debug_add_bus(struct bus_type *bus)
{
- struct notifier_block *nb;
-
- nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
- if (nb == NULL) {
- printk(KERN_ERR "dma_debug_add_bus: out of memory\n");
- return;
- }
-
- nb->notifier_call = dma_debug_device_change;
-
- bus_register_notifier(bus, nb);
+ /* FIXME: register notifier */
}
/*
const char *old_name = kobj->name;
char *s;
+ if (kobj->name && !fmt)
+ return 0;
+
kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs);
if (!kobj->name)
return -ENOMEM;
goto exit;
retval = call_usermodehelper(argv[0], argv,
- env->envp, UMH_NO_WAIT);
+ env->envp, UMH_WAIT_EXEC);
}
exit:
"kobject_uevent: unable to create netlink socket!\n");
return -ENODEV;
}
-
+ netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV);
return 0;
}
sg_miter_stop(miter);
/* get to the next sg if necessary. __offset is adjusted by stop */
- if (miter->__offset == miter->__sg->length && --miter->__nents) {
- miter->__sg = sg_next(miter->__sg);
- miter->__offset = 0;
+ while (miter->__offset == miter->__sg->length) {
+ if (--miter->__nents) {
+ miter->__sg = sg_next(miter->__sg);
+ miter->__offset = 0;
+ } else
+ return false;
}
/* map the next page */
if (str < end)
*str = '%';
++str;
- if (*fmt) {
- if (str < end)
- *str = *fmt;
- ++str;
- } else {
- --fmt;
- }
break;
case FORMAT_TYPE_NRCHARS: {
break;
case FORMAT_TYPE_INVALID:
- if (!*fmt)
- --fmt;
break;
case FORMAT_TYPE_NRCHARS: {
if (str < end)
*str = '%';
++str;
- if (*fmt) {
- if (str < end)
- *str = *fmt;
- ++str;
- } else {
- --fmt;
- }
break;
case FORMAT_TYPE_NRCHARS:
will use one page flag and increase the code size a little,
say Y unless you know what you are doing.
+ See Documentation/vm/unevictable-lru.txt for more information.
+
config HAVE_MLOCK
bool
default y if MMU=y
config MMU_NOTIFIER
bool
+
+config NOMMU_INITIAL_TRIM_EXCESS
+ int "Turn on mmap() excess space trimming before booting"
+ depends on !MMU
+ default 1
+ help
+ The NOMMU mmap() frequently needs to allocate large contiguous chunks
+ of memory on which to store mappings, but it can only ask the system
+ allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
+ more than it requires. To deal with this, mmap() is able to trim off
+ the excess and return it to the allocator.
+
+ If trimming is enabled, the excess is trimmed off and returned to the
+ system allocator, which can cause extra fragmentation, particularly
+ if there are a lot of transient processes.
+
+ If trimming is disabled, the excess is kept, but not used, which for
+ long-term mappings means that the space is wasted.
+
+ Trimming can be dynamically controlled through a sysctl option
+ (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
+ excess pages there must be before trimming should occur, or zero if
+ no trimming is to occur.
+
+ This option specifies the initial value of this option. The default
+ of 1 says that all excess pages should be trimmed.
+
+ See Documentation/nommu-mmap.txt for more information.
mapping->nrpages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
BUG_ON(page_mapped(page));
- mem_cgroup_uncharge_cache_page(page);
/*
* Some filesystems seem to re-dirty the page even after
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
static int sync_page(void *word)
}
return err;
}
+EXPORT_SYMBOL(filemap_write_and_wait_range);
/**
* add_to_page_cache_locked - add a locked page to the pagecache
if (likely(!error)) {
mapping->nrpages++;
__inc_zone_page_state(page, NR_FILE_PAGES);
+ spin_unlock_irq(&mapping->tree_lock);
} else {
page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
page_cache_release(page);
}
-
- spin_unlock_irq(&mapping->tree_lock);
radix_tree_preload_end();
} else
mem_cgroup_uncharge_cache_page(page);
/**
* add_page_wait_queue - Add an arbitrary waiter to a page's wait queue
- * @page - Page defining the wait queue of interest
- * @waiter - Waiter to add to the queue
+ * @page: Page defining the wait queue of interest
+ * @waiter: Waiter to add to the queue
*
* Add an arbitrary @waiter to the wait queue for the nominated @page.
*/
static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
return (struct resv_map *)(get_vma_private_data(vma) &
~HPAGE_RESV_MASK);
return NULL;
static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, (get_vma_private_data(vma) &
HPAGE_RESV_MASK) | (unsigned long)map);
static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, get_vma_private_data(vma) | flags);
}
if (vma->vm_flags & VM_NORESERVE)
return;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
/* Shared mappings always use reserves */
h->resv_huge_pages--;
} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
vma->vm_private_data = (void *)0;
}
/* Returns true if the VMA has associated reserve pages */
static int vma_has_reserves(struct vm_area_struct *vma)
{
- if (vma->vm_flags & VM_SHARED)
+ if (vma->vm_flags & VM_MAYSHARE)
return 1;
if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
return 1;
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
return region_chg(&inode->i_mapping->private_list,
idx, idx + 1);
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
region_add(&inode->i_mapping->private_list, idx, idx + 1);
* at the time of fork() could consume its reserves on COW instead
* of the full address range.
*/
- if (!(vma->vm_flags & VM_SHARED) &&
+ if (!(vma->vm_flags & VM_MAYSHARE) &&
is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
old_page != pagecache_page)
outside_reserve = 1;
clear_huge_page(page, address, huge_page_size(h));
__SetPageUptodate(page);
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
int err;
struct inode *inode = mapping->host;
goto out_mutex;
}
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
pagecache_page = hugetlbfs_pagecache_page(h,
vma, address);
}
* to reserve the full area even if read-only as mprotect() may be
* called to make the mapping read-write. Assume !vma is a shm mapping
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
chg = region_chg(&inode->i_mapping->private_list, from, to);
else {
struct resv_map *resv_map = resv_map_alloc();
* consumed reservations are stored in the map. Hence, nothing
* else has to be done for private mappings here
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
region_add(&inode->i_mapping->private_list, from, to);
return 0;
}
return mem;
}
-static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem)
-{
- if (!mem)
- return true;
- return css_is_removed(&mem->css);
-}
-
-
/*
* Call callback function against all cgroup under hierarchy tree.
*/
if (unlikely(!mem))
return 0;
- VM_BUG_ON(mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(css_is_removed(&mem->css));
while (1) {
int ret;
return NULL;
pc = lookup_page_cgroup(page);
- /*
- * Used bit of swapcache is solid under page lock.
- */
+ lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
mem = pc->mem_cgroup;
if (mem && !css_tryget(&mem->css))
mem = NULL;
rcu_read_unlock();
}
+ unlock_page_cgroup(pc);
return mem;
}
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
}
+#ifdef CONFIG_SWAP
/*
- * called from __delete_from_swap_cache() and drop "page" account.
+ * called after __delete_from_swap_cache() and drop "page" account.
* memcg information is recorded to swap_cgroup of "ent"
*/
void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
if (memcg)
css_put(&memcg->css);
}
+#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/*
}
/*
- * A call to try to shrink memory usage under specified resource controller.
- * This is typically used for page reclaiming for shmem for reducing side
- * effect of page allocation from shmem, which is used by some mem_cgroup.
+ * A call to try to shrink memory usage on charge failure at shmem's swapin.
+ * Calling hierarchical_reclaim is not enough because we should update
+ * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM.
+ * Moreover considering hierarchy, we should reclaim from the mem_over_limit,
+ * not from the memcg which this page would be charged to.
+ * try_charge_swapin does all of these works properly.
*/
-int mem_cgroup_shrink_usage(struct page *page,
+int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm,
gfp_t gfp_mask)
{
struct mem_cgroup *mem = NULL;
- int progress = 0;
- int retry = MEM_CGROUP_RECLAIM_RETRIES;
+ int ret;
if (mem_cgroup_disabled())
return 0;
- if (page)
- mem = try_get_mem_cgroup_from_swapcache(page);
- if (!mem && mm)
- mem = try_get_mem_cgroup_from_mm(mm);
- if (unlikely(!mem))
- return 0;
- do {
- progress = mem_cgroup_hierarchical_reclaim(mem,
- gfp_mask, true, false);
- progress += mem_cgroup_check_under_limit(mem);
- } while (!progress && --retry);
+ ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+ if (!ret)
+ mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */
- css_put(&mem->css);
- if (!retry)
- return -ENOMEM;
- return 0;
+ return ret;
}
static DEFINE_MUTEX(set_limit_mutex);
ret = tmp;
goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(old_page);
+ if (!old_page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(old_page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(old_page));
/*
* Since we dropped the lock we need to revalidate
*/
page_table = pte_offset_map_lock(mm, pmd, address,
&ptl);
- page_cache_release(old_page);
- if (!pte_same(*page_table, orig_pte))
+ if (!pte_same(*page_table, orig_pte)) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
goto unlock;
+ }
page_mkwrite = 1;
}
unlock:
pte_unmap_unlock(page_table, ptl);
if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
-
/*
* Yes, Virginia, this is actually required to prevent a race
* with clear_page_dirty_for_io() from clearing the page dirty
*
* do_no_page is protected similarly.
*/
- wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (!page_mkwrite) {
+ wait_on_page_locked(dirty_page);
+ set_page_dirty_balance(dirty_page, page_mkwrite);
+ }
put_page(dirty_page);
+ if (page_mkwrite) {
+ struct address_space *mapping = dirty_page->mapping;
+
+ set_page_dirty(dirty_page);
+ unlock_page(dirty_page);
+ page_cache_release(dirty_page);
+ if (mapping) {
+ /*
+ * Some device drivers do not set page.mapping
+ * but still dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
}
return ret;
oom_free_new:
page_cache_release(new_page);
oom:
- if (old_page)
+ if (old_page) {
+ if (page_mkwrite) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
+ }
page_cache_release(old_page);
+ }
return VM_FAULT_OOM;
unwritable_page:
if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) {
ret = VM_FAULT_OOM;
- unlock_page(page);
- goto out;
+ goto out_page;
}
/*
out_nomap:
mem_cgroup_cancel_charge_swapin(ptr);
pte_unmap_unlock(page_table, ptl);
+out_page:
unlock_page(page);
page_cache_release(page);
return ret;
int tmp;
unlock_page(page);
- vmf.flags |= FAULT_FLAG_MKWRITE;
+ vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
tmp = vma->vm_ops->page_mkwrite(vma, &vmf);
if (unlikely(tmp &
(VM_FAULT_ERROR | VM_FAULT_NOPAGE))) {
ret = tmp;
- anon = 1; /* no anon but release vmf.page */
- goto out_unlocked;
- }
- lock_page(page);
- /*
- * XXX: this is not quite right (racy vs
- * invalidate) to unlock and relock the page
- * like this, however a better fix requires
- * reworking page_mkwrite locking API, which
- * is better done later.
- */
- if (!page->mapping) {
- ret = 0;
- anon = 1; /* no anon but release vmf.page */
- goto out;
+ goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(page);
+ if (!page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(page));
page_mkwrite = 1;
}
}
pte_unmap_unlock(page_table, ptl);
out:
- unlock_page(vmf.page);
-out_unlocked:
- if (anon)
- page_cache_release(vmf.page);
- else if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
+ if (dirty_page) {
+ struct address_space *mapping = page->mapping;
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (set_page_dirty(dirty_page))
+ page_mkwrite = 1;
+ unlock_page(dirty_page);
put_page(dirty_page);
+ if (page_mkwrite && mapping) {
+ /*
+ * Some device drivers do not set page.mapping but still
+ * dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
+ } else {
+ unlock_page(vmf.page);
+ if (anon)
+ page_cache_release(vmf.page);
}
return ret;
+
+unwritable_page:
+ page_cache_release(page);
+ return ret;
}
static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
/*
* Check that a process has enough memory to allocate a new virtual
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
error:
vm_unacct_memory(pages);
* Overcommit.. This must be the final test, as it will
* update security statistics.
*/
- if (security_vm_enough_memory(grow))
+ if (security_vm_enough_memory_mm(mm, grow))
return -ENOMEM;
/* Ok, everything looks good - let it rip */
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
}
#include <linux/stddef.h>
+#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
*zone = zonelist_zone(z);
return z;
}
+
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+int memmap_valid_within(unsigned long pfn,
+ struct page *page, struct zone *zone)
+{
+ if (page_to_pfn(page) != pfn)
+ return 0;
+
+ if (page_zone(page) != zone)
+ return 0;
+
+ return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
struct page *mem_map;
unsigned long max_mapnr;
unsigned long num_physpages;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
-int sysctl_nr_trim_pages = 1; /* page trimming behaviour */
+int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
atomic_long_t mmap_pages_allocated;
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC);
}
validate_nommu_regions();
- BUG_ON(region->vm_start & ~PAGE_MASK);
-
parent = NULL;
p = &nommu_region_tree.rb_node;
while (*p) {
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
+
error:
vm_unacct_memory(pages);
printk(KERN_INFO "[ pid ] uid tgid total_vm rss cpu oom_adj "
"name\n");
do_each_thread(g, p) {
- /*
- * total_vm and rss sizes do not exist for tasks with a
- * detached mm so there's no need to report them.
- */
- if (!p->mm)
- continue;
+ struct mm_struct *mm;
+
if (mem && !task_in_mem_cgroup(p, mem))
continue;
if (!thread_group_leader(p))
continue;
task_lock(p);
+ mm = p->mm;
+ if (!mm) {
+ /*
+ * total_vm and rss sizes do not exist for tasks with no
+ * mm so there's no need to report them; they can't be
+ * oom killed anyway.
+ */
+ task_unlock(p);
+ continue;
+ }
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
- p->pid, __task_cred(p)->uid, p->tgid,
- p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p),
- p->oomkilladj, p->comm);
+ p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
+ get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+ p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
*/
static void __out_of_memory(gfp_t gfp_mask, int order)
{
- if (sysctl_oom_kill_allocating_task) {
- oom_kill_process(current, gfp_mask, order, 0, NULL,
- "Out of memory (oom_kill_allocating_task)");
-
- } else {
- unsigned long points;
- struct task_struct *p;
-
-retry:
- /*
- * Rambo mode: Shoot down a process and hope it solves whatever
- * issues we may have.
- */
- p = select_bad_process(&points, NULL);
+ struct task_struct *p;
+ unsigned long points;
- if (PTR_ERR(p) == -1UL)
+ if (sysctl_oom_kill_allocating_task)
+ if (!oom_kill_process(current, gfp_mask, order, 0, NULL,
+ "Out of memory (oom_kill_allocating_task)"))
return;
+retry:
+ /*
+ * Rambo mode: Shoot down a process and hope it solves whatever
+ * issues we may have.
+ */
+ p = select_bad_process(&points, NULL);
- /* Found nothing?!?! Either we hang forever, or we panic. */
- if (!p) {
- read_unlock(&tasklist_lock);
- panic("Out of memory and no killable processes...\n");
- }
+ if (PTR_ERR(p) == -1UL)
+ return;
- if (oom_kill_process(p, gfp_mask, order, points, NULL,
- "Out of memory"))
- goto retry;
+ /* Found nothing?!?! Either we hang forever, or we panic. */
+ if (!p) {
+ read_unlock(&tasklist_lock);
+ panic("Out of memory and no killable processes...\n");
}
+
+ if (oom_kill_process(p, gfp_mask, order, points, NULL,
+ "Out of memory"))
+ goto retry;
}
/*
/*
* The interval between `kupdate'-style writebacks
*/
-unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */
+unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
/*
* The longest time for which data is allowed to remain dirty
*/
-unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */
+unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
/*
* Flag that makes the machine dump writes/reads and block dirtyings.
sync_supers();
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval);
+ oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
start_jif = jiffies;
next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
nr_to_write = global_page_state(NR_FILE_DIRTY) +
static int zone_batchsize(struct zone *zone)
{
+#ifdef CONFIG_MMU
int batch;
/*
* of pages of one half of the possible page colors
* and the other with pages of the other colors.
*/
- batch = (1 << (fls(batch + batch/2)-1)) - 1;
+ batch = rounddown_pow_of_two(batch + batch/2) - 1;
return batch;
+
+#else
+ /* The deferral and batching of frees should be suppressed under NOMMU
+ * conditions.
+ *
+ * The problem is that NOMMU needs to be able to allocate large chunks
+ * of contiguous memory as there's no hardware page translation to
+ * assemble apparent contiguous memory from discontiguous pages.
+ *
+ * Queueing large contiguous runs of pages for batching, however,
+ * causes the pages to actually be freed in smaller chunks. As there
+ * can be a significant delay between the individual batches being
+ * recycled, this leads to the once large chunks of space being
+ * fragmented and becoming unavailable for high-order allocations.
+ */
+ return 0;
+#endif
}
static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
*/
int nr_pdflush_threads = 0;
-/*
- * The max/min number of pdflush threads. R/W by sysctl at
- * /proc/sys/vm/nr_pdflush_threads_max/min
- */
-int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
-int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
-
-
/*
* The time at which the pdflush thread pool last went empty
*/
* Thread pool management algorithm:
*
* - The minimum and maximum number of pdflush instances are bound
- * by nr_pdflush_threads_min and nr_pdflush_threads_max.
+ * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
*
* - If there have been no idle pdflush instances for 1 second, create
* a new one.
* To throttle creation, we reset last_empty_jifs.
*/
if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
- if (list_empty(&pdflush_list) &&
- nr_pdflush_threads < nr_pdflush_threads_max) {
- last_empty_jifs = jiffies;
- nr_pdflush_threads++;
- spin_unlock_irq(&pdflush_lock);
- start_one_pdflush_thread();
- spin_lock_irq(&pdflush_lock);
+ if (list_empty(&pdflush_list)) {
+ if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+ last_empty_jifs = jiffies;
+ nr_pdflush_threads++;
+ spin_unlock_irq(&pdflush_lock);
+ start_one_pdflush_thread();
+ spin_lock_irq(&pdflush_lock);
+ }
}
}
*/
if (list_empty(&pdflush_list))
continue;
- if (nr_pdflush_threads <= nr_pdflush_threads_min)
+ if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
continue;
pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
* Pre-set nr_pdflush_threads... If we fail to create,
* the count will be decremented.
*/
- nr_pdflush_threads = nr_pdflush_threads_min;
+ nr_pdflush_threads = MIN_PDFLUSH_THREADS;
- for (i = 0; i < nr_pdflush_threads_min; i++)
+ for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
start_one_pdflush_thread();
return 0;
}
* Original design by Rik van Riel <riel@conectiva.com.br> 2001
* File methods by Dave McCracken <dmccr@us.ibm.com> 2003, 2004
* Anonymous methods by Andrea Arcangeli <andrea@suse.de> 2004
- * Contributions by Hugh Dickins <hugh@veritas.com> 2003, 2004
+ * Contributions by Hugh Dickins 2003, 2004
*/
/*
#include <linux/init.h>
#include <linux/vfs.h>
#include <linux/mount.h>
+#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/exportfs.h>
#include <linux/generic_acl.h>
#include <linux/mman.h>
-#include <linux/pagemap.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
#include <asm/div64.h>
#include <asm/pgtable.h>
+/*
+ * The maximum size of a shmem/tmpfs file is limited by the maximum size of
+ * its triple-indirect swap vector - see illustration at shmem_swp_entry().
+ *
+ * With 4kB page size, maximum file size is just over 2TB on a 32-bit kernel,
+ * but one eighth of that on a 64-bit kernel. With 8kB page size, maximum
+ * file size is just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
+ * MAX_LFS_FILESIZE being then more restrictive than swap vector layout.
+ *
+ * We use / and * instead of shifts in the definitions below, so that the swap
+ * vector can be tested with small even values (e.g. 20) for ENTRIES_PER_PAGE.
+ */
#define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
-#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
+#define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
-#define SHMEM_MAX_BYTES ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMSWP_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
+#define SHMSWP_MAX_BYTES (SHMSWP_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMEM_MAX_BYTES min_t(unsigned long long, SHMSWP_MAX_BYTES, MAX_LFS_FILESIZE)
+#define SHMEM_MAX_INDEX ((unsigned long)((SHMEM_MAX_BYTES+1) >> PAGE_CACHE_SHIFT))
+
+#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
#define VM_ACCT(size) (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT)
/* info->flags needs VM_flags to handle pagein/truncate races efficiently */
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
if (error == -ENOMEM) {
- /* allow reclaim from this memory cgroup */
- error = mem_cgroup_shrink_usage(swappage,
+ /*
+ * reclaim from proper memory cgroup and
+ * call memcg's OOM if needed.
+ */
+ error = mem_cgroup_shmem_charge_fallback(
+ swappage,
current->mm,
gfp);
if (error) {
#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
#define shmem_acct_size(flags, size) 0
#define shmem_unacct_size(flags, size) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define SHMEM_MAX_BYTES MAX_LFS_FILESIZE
#endif /* CONFIG_SHMEM */
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/module.h>
static void slob_free_pages(void *b, int order)
{
+ if (current->reclaim_state)
+ current->reclaim_state->reclaimed_slab += 1 << order;
free_pages((unsigned long)b, order);
}
spin_unlock_irqrestore(&slob_lock, flags);
clear_slob_page(sp);
free_slob_page(sp);
- free_page((unsigned long)b);
+ slob_free_pages(b, 0);
return;
}
*/
#include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
#include <linux/module.h>
#include <linux/bit_spinlock.h>
#include <linux/interrupt.h>
__ClearPageSlab(page);
reset_page_mapcount(page);
+ if (current->reclaim_state)
+ current->reclaim_state->reclaimed_slab += pages;
__free_pages(page, order);
}
* Doh this slab cannot be placed using slub_max_order.
*/
order = slab_order(size, 1, MAX_ORDER, 1);
- if (order <= MAX_ORDER)
+ if (order < MAX_ORDER)
return order;
return -ENOSYS;
}
static int __init setup_slub_max_order(char *str)
{
get_option(&str, &slub_max_order);
+ slub_max_order = min(slub_max_order, MAX_ORDER - 1);
return 1;
}
EXPORT_SYMBOL(pagevec_lookup_tag);
-#ifdef CONFIG_SMP
-/*
- * We tolerate a little inaccuracy to avoid ping-ponging the counter between
- * CPUs
- */
-#define ACCT_THRESHOLD max(16, NR_CPUS * 2)
-
-static DEFINE_PER_CPU(long, committed_space);
-
-void vm_acct_memory(long pages)
-{
- long *local;
-
- preempt_disable();
- local = &__get_cpu_var(committed_space);
- *local += pages;
- if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_long_add(*local, &vm_committed_space);
- *local = 0;
- }
- preempt_enable();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Drop the CPU's cached committed space back into the central pool. */
-static int cpu_swap_callback(struct notifier_block *nfb,
- unsigned long action,
- void *hcpu)
-{
- long *committed;
-
- committed = &per_cpu(committed_space, (long)hcpu);
- if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_long_add(*committed, &vm_committed_space);
- *committed = 0;
- drain_cpu_pagevecs((long)hcpu);
- }
- return NOTIFY_OK;
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-#endif /* CONFIG_SMP */
-
/*
* Perform any setup for the swap system
*/
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
-#ifdef CONFIG_HOTPLUG_CPU
- hotcpu_notifier(cpu_swap_callback, 0);
-#endif
}
*/
void __delete_from_swap_cache(struct page *page)
{
- swp_entry_t ent = {.val = page_private(page)};
-
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapCache(page));
VM_BUG_ON(PageWriteback(page));
total_swapcache_pages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
INC_CACHE_INFO(del_total);
- mem_cgroup_uncharge_swapcache(page, ent);
}
/**
__delete_from_swap_cache(page);
spin_unlock_irq(&swapper_space.tree_lock);
+ mem_cgroup_uncharge_swapcache(page, entry);
swap_free(entry);
page_cache_release(page);
}
BUG_ON(page_has_private(page));
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
page_cache_release(page); /* pagecache ref */
return 1;
failed:
}
#endif
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start: starting user address
+ * @nr_pages: number of pages from start to pin
+ * @write: whether pages will be written to
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
int __attribute__((weak)) get_user_pages_fast(unsigned long start,
int nr_pages, int write, struct page **pages)
{
printk(KERN_WARNING
"vmap allocation for size %lu failed: "
"use vmalloc=<size> to increase size.\n", size);
+ kfree(va);
return ERR_PTR(-EBUSY);
}
/* Can mapped pages be reclaimed? */
int may_unmap;
+ /* Can pages be swapped as part of reclaim? */
+ int may_swap;
+
/* This context's SWAP_CLUSTER_MAX. If freeing memory for
* suspend, we effectively ignore SWAP_CLUSTER_MAX.
* In this context, it doesn't matter that we scan the
swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_swapcache(page, swap);
swap_free(swap);
} else {
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
return 1;
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
/* If we have no swap space, do not bother scanning anon pages. */
- if (nr_swap_pages <= 0) {
+ if (!sc->may_swap || (nr_swap_pages <= 0)) {
percent[0] = 0;
percent[1] = 100;
return;
for_each_evictable_lru(l) {
int file = is_file_lru(l);
- int scan;
+ unsigned long scan;
scan = zone_nr_pages(zone, sc, l);
if (priority) {
.may_writepage = !laptop_mode,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.may_unmap = 1,
+ .may_swap = 1,
.swappiness = vm_swappiness,
.order = order,
.mem_cgroup = NULL,
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
+ .may_swap = !noswap,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.swappiness = swappiness,
.order = 0,
};
struct zonelist *zonelist;
- if (noswap)
- sc.may_unmap = 0;
-
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
zonelist = NODE_DATA(numa_node_id())->node_zonelists;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.may_unmap = 1,
+ .may_swap = 1,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.swappiness = vm_swappiness,
.order = order,
nr_reclaimed += shrink_list(l, nr_to_scan, zone,
sc, prio);
if (nr_reclaimed >= nr_pages) {
- sc->nr_reclaimed = nr_reclaimed;
+ sc->nr_reclaimed += nr_reclaimed;
return;
}
}
}
}
- sc->nr_reclaimed = nr_reclaimed;
+ sc->nr_reclaimed += nr_reclaimed;
}
/*
.may_unmap = 0,
.may_writepage = 1,
.isolate_pages = isolate_pages_global,
+ .nr_reclaimed = 0,
};
current->reclaim_state = &reclaim_state;
struct scan_control sc = {
.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE),
.may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP),
+ .may_swap = 1,
.swap_cluster_max = max_t(unsigned long, nr_pages,
SWAP_CLUSTER_MAX),
.gfp_mask = gfp_mask,
continue;
page = pfn_to_page(pfn);
-#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
- /*
- * Ordinarily, memory holes in flatmem still have a valid
- * memmap for the PFN range. However, an architecture for
- * embedded systems (e.g. ARM) can free up the memmap backing
- * holes to save memory on the assumption the memmap is
- * never used. The page_zone linkages are then broken even
- * though pfn_valid() returns true. Skip the page if the
- * linkages are broken. Even if this test passed, the impact
- * is that the counters for the movable type are off but
- * fragmentation monitoring is likely meaningless on small
- * systems.
- */
- if (page_zone(page) != zone)
+
+ /* Watch for unexpected holes punched in the memmap */
+ if (!memmap_valid_within(pfn, page, zone))
continue;
-#endif
+
mtype = get_pageblock_migratetype(page);
if (mtype < MIGRATE_TYPES)
}
seq_putc(seq, '\n');
}
+
+ if (dev)
+ dev_put(dev);
}
return 0;
}
continue;
dev_change_flags(vlandev, flgs & ~IFF_UP);
+ vlan_transfer_operstate(dev, vlandev);
}
break;
continue;
dev_change_flags(vlandev, flgs | IFF_UP);
+ vlan_transfer_operstate(dev, vlandev);
}
break;
if (!skb)
return NET_RX_DROP;
- if (netpoll_rx_on(skb))
+ if (netpoll_rx_on(skb)) {
+ skb->protocol = eth_type_trans(skb, skb->dev);
return vlan_hwaccel_receive_skb(skb, grp, vlan_tci);
+ }
return napi_frags_finish(napi, skb,
vlan_gro_common(napi, grp, vlan_tci, skb));
if (vlan->flags & VLAN_FLAG_GVRP)
vlan_gvrp_request_join(dev);
+ netif_carrier_on(dev);
return 0;
clear_allmulti:
if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
dev_unicast_delete(real_dev, dev->dev_addr, ETH_ALEN);
out:
+ netif_carrier_off(dev);
return err;
}
if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len);
+ netif_carrier_off(dev);
return 0;
}
struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
int subclass = 0;
+ netif_carrier_off(dev);
+
/* IFF_BROADCAST|IFF_MULTICAST; ??? */
dev->flags = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI);
dev->iflink = real_dev->ifindex;
const struct vlan_dev_info *vlan = vlan_dev_info(dev);
struct net_device *real_dev = vlan->real_dev;
- if (!real_dev->ethtool_ops->get_settings)
+ if (!real_dev->ethtool_ops ||
+ !real_dev->ethtool_ops->get_settings)
return -EOPNOTSUPP;
return real_dev->ethtool_ops->get_settings(real_dev, cmd);
p9pdu_reset(req->tc);
p9pdu_reset(req->rc);
- req->flush_tag = 0;
req->tc->tag = tag-1;
req->status = REQ_STATUS_ALLOC;
*/
void p9_client_cb(struct p9_client *c, struct p9_req_t *req)
{
- struct p9_req_t *other_req;
- unsigned long flags;
-
P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag);
-
- if (req->status == REQ_STATUS_ERROR)
- wake_up(req->wq);
-
- if (req->flush_tag) { /* flush receive path */
- P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- other_req = p9_tag_lookup(c, req->flush_tag);
- if (other_req->status != REQ_STATUS_FLSH) /* stale flush */
- spin_unlock_irqrestore(&c->lock, flags);
- else {
- other_req->status = REQ_STATUS_FLSHD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(other_req->wq);
- }
- p9_free_req(c, req);
- } else { /* normal receive path */
- P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- if (req->status != REQ_STATUS_FLSHD)
- req->status = REQ_STATUS_RCVD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(req->wq);
- P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
- }
+ wake_up(req->wq);
+ P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
}
EXPORT_SYMBOL(p9_client_cb);
if (IS_ERR(req))
return PTR_ERR(req);
- req->flush_tag = oldtag;
- /* we don't free anything here because RPC isn't complete */
+ /* if we haven't received a response for oldreq,
+ remove it from the list. */
+ spin_lock(&c->lock);
+ if (oldreq->status == REQ_STATUS_FLSH)
+ list_del(&oldreq->req_list);
+ spin_unlock(&c->lock);
+
+ p9_free_req(c, req);
return 0;
}
struct p9_req_t *req;
unsigned long flags;
int sigpending;
- int flushed = 0;
P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type);
goto reterr;
}
- /* if it was a flush we just transmitted, return our tag */
- if (type == P9_TFLUSH)
- return req;
-again:
P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag);
err = wait_event_interruptible(*req->wq,
req->status >= REQ_STATUS_RCVD);
- P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n",
- req->wq, tag, err, flushed);
+ P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n",
+ req->wq, tag, err);
if (req->status == REQ_STATUS_ERROR) {
P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err);
err = req->t_err;
- } else if (err == -ERESTARTSYS && flushed) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n");
- goto again;
- } else if (req->status == REQ_STATUS_FLSHD) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n");
- err = -ERESTARTSYS;
}
- if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) {
+ if ((err == -ERESTARTSYS) && (c->status == Connected)) {
P9_DPRINTK(P9_DEBUG_MUX, "flushing\n");
- spin_lock_irqsave(&c->lock, flags);
- if (req->status == REQ_STATUS_SENT)
- req->status = REQ_STATUS_FLSH;
- spin_unlock_irqrestore(&c->lock, flags);
sigpending = 1;
- flushed = 1;
clear_thread_flag(TIF_SIGPENDING);
- if (c->trans_mod->cancel(c, req)) {
- err = p9_client_flush(c, req);
- if (err == 0)
- goto again;
- }
+ if (c->trans_mod->cancel(c, req))
+ p9_client_flush(c, req);
+
+ /* if we received the response anyway, don't signal error */
+ if (req->status == REQ_STATUS_RCVD)
+ err = 0;
}
if (sigpending) {
ret->name, ret->uid, ret->gid, ret->muid, ret->extension,
ret->n_uid, ret->n_gid, ret->n_muid);
+ p9_free_req(clnt, req);
+ return ret;
+
free_and_error:
p9_free_req(clnt, req);
error:
- return ret;
+ kfree(ret);
+ return ERR_PTR(err);
}
EXPORT_SYMBOL(p9_client_stat);
+static int p9_client_statsize(struct p9_wstat *wst, int optional)
+{
+ int ret;
+
+ /* size[2] type[2] dev[4] qid[13] */
+ /* mode[4] atime[4] mtime[4] length[8]*/
+ /* name[s] uid[s] gid[s] muid[s] */
+ ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+
+ if (wst->name)
+ ret += strlen(wst->name);
+ if (wst->uid)
+ ret += strlen(wst->uid);
+ if (wst->gid)
+ ret += strlen(wst->gid);
+ if (wst->muid)
+ ret += strlen(wst->muid);
+
+ if (optional) {
+ ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */
+ if (wst->extension)
+ ret += strlen(wst->extension);
+ }
+
+ return ret;
+}
+
int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
{
int err;
struct p9_req_t *req;
struct p9_client *clnt;
+ err = 0;
+ clnt = fid->clnt;
+ wst->size = p9_client_statsize(wst, clnt->dotu);
P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid);
P9_DPRINTK(P9_DEBUG_9P,
" sz=%x type=%x dev=%x qid=%x.%llx.%x\n"
wst->atime, wst->mtime, (unsigned long long)wst->length,
wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
wst->n_uid, wst->n_gid, wst->n_muid);
- err = 0;
- clnt = fid->clnt;
- req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst);
+ req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto error;
spin_unlock_irqrestore(&m->client->lock, flags);
list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
- list_del(&req->req_list);
P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req);
+ list_del(&req->req_list);
p9_client_cb(m->client, req);
}
}
"mux %p pkt: size: %d bytes tag: %d\n", m, n, tag);
m->req = p9_tag_lookup(m->client, tag);
- if (!m->req) {
+ if (!m->req || (m->req->status != REQ_STATUS_SENT &&
+ m->req->status != REQ_STATUS_FLSH)) {
P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n",
tag);
err = -EIO;
if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */
P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n");
spin_lock(&m->client->lock);
+ if (m->req->status != REQ_STATUS_ERROR)
+ m->req->status = REQ_STATUS_RCVD;
list_del(&m->req->req_list);
spin_unlock(&m->client->lock);
p9_client_cb(m->client, m->req);
-
m->rbuf = NULL;
m->rpos = 0;
m->rsize = 0;
req = list_entry(m->unsent_req_list.next, struct p9_req_t,
req_list);
req->status = REQ_STATUS_SENT;
+ P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req);
list_move_tail(&req->req_list, &m->req_list);
m->wbuf = req->tc->sdata;
P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
spin_lock(&client->lock);
- list_del(&req->req_list);
if (req->status == REQ_STATUS_UNSENT) {
+ list_del(&req->req_list);
req->status = REQ_STATUS_FLSHD;
ret = 0;
- }
+ } else if (req->status == REQ_STATUS_SENT)
+ req->status = REQ_STATUS_FLSH;
spin_unlock(&client->lock);
goto err_out;
req->rc = c->rc;
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(client, req);
return;
P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc);
P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag);
req = p9_tag_lookup(chan->client, rc->tag);
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(chan->client, req);
}
}
<file:Documentation/Changes> under "iptables" for the location of
these packages.
- Make sure to say N to "Fast switching" below if you intend to say Y
- here, as Fast switching currently bypasses netfilter.
-
- Chances are that you should say Y here if you compile a kernel which
- will run as a router and N for regular hosts. If unsure, say N.
-
if NETFILTER
config NETFILTER_DEBUG
struct br2684_dev *brdev = BRPRIV(netdev);
ether_setup(netdev);
+ brdev->net_dev = netdev;
netdev->netdev_ops = &br2684_netdev_ops;
{
struct ax25_uid_assoc *pt;
struct hlist_node *node;
- int i = 0;
+ int i = 1;
read_lock(&ax25_uid_lock);
+
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
ax25_uid_for_each(pt, node, &ax25_uid_list) {
if (i == *pos)
return pt;
static void *ax25_uid_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
++*pos;
-
- return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next,
+ if (v == SEQ_START_TOKEN)
+ return ax25_uid_list.first;
+ else
+ return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next,
ax25_uid_assoc, uid_node);
}
switch (conn->state) {
case BT_CONNECT:
case BT_CONNECT2:
- if (conn->type == ACL_LINK)
+ if (conn->type == ACL_LINK && conn->out)
hci_acl_connect_cancel(conn);
- else
- hci_acl_disconn(conn, 0x13);
break;
case BT_CONFIG:
case BT_CONNECTED:
conn->state = BT_OPEN;
conn->power_save = 1;
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
switch (type) {
case ACL_LINK:
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
+ hci_conn_init_sysfs(conn);
+
tasklet_enable(&hdev->tx_task);
return conn;
hci_conn_del_sysfs(conn);
+ hci_dev_put(hdev);
+
return 0;
}
if (sec_level == BT_SECURITY_SDP)
return 1;
- if (sec_level == BT_SECURITY_LOW) {
- if (conn->ssp_mode > 0 && conn->hdev->ssp_mode > 0)
- return hci_conn_auth(conn, sec_level, auth_type);
- else
- return 1;
- }
+ if (sec_level == BT_SECURITY_LOW &&
+ (!conn->ssp_mode || !conn->hdev->ssp_mode))
+ return 1;
if (conn->link_mode & HCI_LM_ENCRYPT)
return hci_conn_auth(conn, sec_level, auth_type);
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
- if (!conn)
- goto unlock;
+ if (!conn) {
+ if (ev->link_type != SCO_LINK)
+ goto unlock;
+
+ conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr);
+ if (!conn)
+ goto unlock;
+
+ conn->type = SCO_LINK;
+ }
if (!ev->status) {
conn->handle = __le16_to_cpu(ev->handle);
if (conn->type == ACL_LINK) {
conn->state = BT_CONFIG;
hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
} else
conn->state = BT_CONNECTED;
hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
}
- } else
+ } else {
hci_auth_cfm(conn, ev->status);
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
if (!ev->status) {
struct hci_cp_set_conn_encrypt cp;
static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
+ struct hci_ev_pin_code_req *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
BT_DBG("%s", hdev->name);
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+ if (conn && conn->state == BT_CONNECTED) {
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_PAIRING_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+ hci_dev_unlock(hdev);
}
static inline void hci_link_key_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
static inline void hci_link_key_notify_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
+ struct hci_ev_link_key_notify *ev = (void *) skb->data;
+ struct hci_conn *conn;
+
BT_DBG("%s", hdev->name);
+
+ hci_dev_lock(hdev);
+
+ conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+ if (conn) {
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+ hci_dev_unlock(hdev);
}
static inline void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *skb)
conn->type = SCO_LINK;
}
- if (conn->out && ev->status == 0x1c && conn->attempt < 2) {
- conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
- (hdev->esco_type & EDR_ESCO_MASK);
- hci_setup_sync(conn, conn->link->handle);
- goto unlock;
- }
-
- if (!ev->status) {
+ switch (ev->status) {
+ case 0x00:
conn->handle = __le16_to_cpu(ev->handle);
conn->state = BT_CONNECTED;
hci_conn_add_sysfs(conn);
- } else
+ break;
+
+ case 0x1c: /* SCO interval rejected */
+ case 0x1f: /* Unspecified error */
+ if (conn->out && conn->attempt < 2) {
+ conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
+ (hdev->esco_type & EDR_ESCO_MASK);
+ hci_setup_sync(conn, conn->link->handle);
+ goto unlock;
+ }
+ /* fall through */
+
+ default:
conn->state = BT_CLOSED;
+ break;
+ }
hci_proto_connect_cfm(conn, ev->status);
if (ev->status)
struct class *bt_class = NULL;
EXPORT_SYMBOL_GPL(bt_class);
-static struct workqueue_struct *btaddconn;
-static struct workqueue_struct *btdelconn;
+static struct workqueue_struct *bt_workq;
static inline char *link_typetostr(int type)
{
static void add_conn(struct work_struct *work)
{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
+ struct hci_dev *hdev = conn->hdev;
- flush_workqueue(btdelconn);
+ dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
if (device_add(&conn->dev) < 0) {
BT_ERR("Failed to register connection device");
return;
}
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
- struct hci_dev *hdev = conn->hdev;
-
- BT_DBG("conn %p", conn);
-
- conn->dev.type = &bt_link;
- conn->dev.class = bt_class;
- conn->dev.parent = &hdev->dev;
- dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
-
- dev_set_drvdata(&conn->dev, conn);
-
- device_initialize(&conn->dev);
-
- INIT_WORK(&conn->work, add_conn);
-
- queue_work(btaddconn, &conn->work);
+ hci_dev_hold(hdev);
}
/*
static void del_conn(struct work_struct *work)
{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
struct hci_dev *hdev = conn->hdev;
+ if (!device_is_registered(&conn->dev))
+ return;
+
while (1) {
struct device *dev;
device_del(&conn->dev);
put_device(&conn->dev);
+
hci_dev_put(hdev);
}
-void hci_conn_del_sysfs(struct hci_conn *conn)
+void hci_conn_init_sysfs(struct hci_conn *conn)
{
+ struct hci_dev *hdev = conn->hdev;
+
BT_DBG("conn %p", conn);
- if (!device_is_registered(&conn->dev))
- return;
+ conn->dev.type = &bt_link;
+ conn->dev.class = bt_class;
+ conn->dev.parent = &hdev->dev;
- INIT_WORK(&conn->work, del_conn);
+ dev_set_drvdata(&conn->dev, conn);
+
+ device_initialize(&conn->dev);
- queue_work(btdelconn, &conn->work);
+ INIT_WORK(&conn->work_add, add_conn);
+ INIT_WORK(&conn->work_del, del_conn);
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ queue_work(bt_workq, &conn->work_add);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ queue_work(bt_workq, &conn->work_del);
}
static inline char *host_typetostr(int type)
int __init bt_sysfs_init(void)
{
- btaddconn = create_singlethread_workqueue("btaddconn");
- if (!btaddconn)
+ bt_workq = create_singlethread_workqueue("bluetooth");
+ if (!bt_workq)
return -ENOMEM;
- btdelconn = create_singlethread_workqueue("btdelconn");
- if (!btdelconn) {
- destroy_workqueue(btaddconn);
- return -ENOMEM;
- }
-
bt_class = class_create(THIS_MODULE, "bluetooth");
if (IS_ERR(bt_class)) {
- destroy_workqueue(btdelconn);
- destroy_workqueue(btaddconn);
+ destroy_workqueue(bt_workq);
return PTR_ERR(bt_class);
}
void bt_sysfs_cleanup(void)
{
- destroy_workqueue(btaddconn);
- destroy_workqueue(btdelconn);
+ destroy_workqueue(bt_workq);
class_destroy(bt_class);
}
rfcomm_send_ua(d->session, d->dlci);
+ rfcomm_dlc_clear_timer(d);
+
rfcomm_dlc_lock(d);
d->state = BT_CONNECTED;
d->state_change(d, 0);
if (skb->protocol == htons(ETH_P_PAUSE))
goto drop;
+ /* If STP is turned off, then forward */
+ if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
+ goto forward;
+
if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
NULL, br_handle_local_finish))
return NULL; /* frame consumed by filter */
return skb; /* continue processing */
}
+forward:
switch (p->state) {
case BR_STATE_FORWARDING:
rhook = rcu_dereference(br_should_route_hook);
return NF_STOLEN;
}
+#if defined(CONFIG_NF_CONNTRACK_IPV4) || defined(CONFIG_NF_CONNTRACK_IPV4_MODULE)
static int br_nf_dev_queue_xmit(struct sk_buff *skb)
{
- if (skb->protocol == htons(ETH_P_IP) &&
+ if (skb->nfct != NULL &&
+ (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb)) &&
skb->len > skb->dev->mtu &&
!skb_is_gso(skb))
return ip_fragment(skb, br_dev_queue_push_xmit);
else
return br_dev_queue_push_xmit(skb);
}
+#else
+static int br_nf_dev_queue_xmit(struct sk_buff *skb)
+{
+ return br_dev_queue_push_xmit(skb);
+}
+#endif
/* PF_BRIDGE/POST_ROUTING ********************************************/
static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb,
{
int isroot = br_is_root_bridge(br);
+ if (br->stp_enabled != BR_KERNEL_STP)
+ return;
+
pr_info("%s: topology change detected, %s\n", br->dev->name,
isroot ? "propagating" : "sending tcn bpdu");
rcu_read_unlock();
- /* free the skbuff allocated by the netdevice driver */
- kfree_skb(skb);
+ /* consume the skbuff allocated by the netdevice driver */
+ consume_skb(skb);
if (matches > 0) {
can_stats.matches++;
return sk->sk_type == SOCK_SEQPACKET || sk->sk_type == SOCK_STREAM;
}
+static int receiver_wake_function(wait_queue_t *wait, unsigned mode, int sync,
+ void *key)
+{
+ unsigned long bits = (unsigned long)key;
+
+ /*
+ * Avoid a wakeup if event not interesting for us
+ */
+ if (bits && !(bits & (POLLIN | POLLERR)))
+ return 0;
+ return autoremove_wake_function(wait, mode, sync, key);
+}
/*
* Wait for a packet..
*/
static int wait_for_packet(struct sock *sk, int *err, long *timeo_p)
{
int error;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, receiver_wake_function);
prepare_to_wait_exclusive(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE);
{
struct packet_type *ptype;
+#ifdef CONFIG_NET_CLS_ACT
+ if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS)))
+ net_timestamp(skb);
+#else
net_timestamp(skb);
+#endif
rcu_read_lock();
list_for_each_entry_rcu(ptype, &ptype_all, list) {
{
if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
netif_running(dev)) {
- netif_stop_queue(dev);
+ netif_tx_stop_all_queues(dev);
}
}
EXPORT_SYMBOL(netif_device_detach);
{
if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
netif_running(dev)) {
- netif_wake_queue(dev);
+ netif_tx_wake_all_queues(dev);
__netdev_watchdog_up(dev);
}
}
{
u32 hash;
- if (skb_rx_queue_recorded(skb)) {
- hash = skb_get_rx_queue(skb);
- } else if (skb->sk && skb->sk->sk_hash) {
+ if (skb_rx_queue_recorded(skb))
+ return skb_get_rx_queue(skb) % dev->real_num_tx_queues;
+
+ if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
- } else
+ else
hash = skb->protocol;
hash = jhash_1word(hash, skb_tx_hashrnd);
struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK];
int err = -ENOENT;
- if (NAPI_GRO_CB(skb)->count == 1)
+ if (NAPI_GRO_CB(skb)->count == 1) {
+ skb_shinfo(skb)->gso_size = 0;
goto out;
+ }
rcu_read_lock();
list_for_each_entry_rcu(ptype, head, list) {
}
out:
- skb_shinfo(skb)->gso_size = 0;
return netif_receive_skb(skb);
}
}
BUG_ON(info->nr_frags > MAX_SKB_FRAGS);
- frag = &info->frags[info->nr_frags - 1];
+ frag = info->frags;
- for (i = skb_shinfo(skb)->nr_frags; i < info->nr_frags; i++) {
+ for (i = 0; i < info->nr_frags; i++) {
skb_fill_page_desc(skb, i, frag->page, frag->page_offset,
frag->size);
frag++;
dev->iflink = -1;
#ifdef CONFIG_COMPAT_NET_DEV_OPS
- /* Netdevice_ops API compatiability support.
+ /* Netdevice_ops API compatibility support.
* This is temporary until all network devices are converted.
*/
if (dev->netdev_ops) {
dev->name, netdev_drivername(dev, drivername, 64));
/* This works only because net_device_ops and the
- compatiablity structure are the same. */
+ compatibility structure are the same. */
dev->netdev_ops = (void *) &(dev->init);
}
#endif
NOTES.
- * The stored value for avbps is scaled by 2^5, so that maximal
- rate is ~1Gbit, avpps is scaled by 2^10.
-
+ * avbps is scaled by 2^5, avpps is scaled by 2^10.
+ * both values are reported as 32 bit unsigned values. bps can
+ overflow for fast links : max speed being 34360Mbit/sec
* Minimal interval is HZ/4=250msec (it is the greatest common divisor
for HZ=100 and HZ=1024 8)), maximal interval
is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
spinlock_t *stats_lock;
int ewma_log;
u64 last_bytes;
+ u64 avbps;
u32 last_packets;
u32 avpps;
- u32 avbps;
struct rcu_head e_rcu;
struct rb_node node;
};
rcu_read_lock();
list_for_each_entry_rcu(e, &elist[idx].list, list) {
u64 nbytes;
+ u64 brate;
u32 npackets;
u32 rate;
nbytes = e->bstats->bytes;
npackets = e->bstats->packets;
- rate = (nbytes - e->last_bytes)<<(7 - idx);
+ brate = (nbytes - e->last_bytes)<<(7 - idx);
e->last_bytes = nbytes;
- e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
+ e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
e->rate_est->bps = (e->avbps+0xF)>>5;
rate = (npackets - e->last_packets)<<(12 - idx);
void netpoll_poll(struct netpoll *np)
{
struct net_device *dev = np->dev;
- const struct net_device_ops *ops = dev->netdev_ops;
+ const struct net_device_ops *ops;
+
+ if (!dev || !netif_running(dev))
+ return;
- if (!dev || !netif_running(dev) || !ops->ndo_poll_controller)
+ ops = dev->netdev_ops;
+ if (!ops->ndo_poll_controller)
return;
/* Process pending work on NIC */
if (pkt_dev->cflows) {
/* let go of the SAs if we have them */
int i = 0;
- for (; i < pkt_dev->nflows; i++){
+ for (; i < pkt_dev->cflows; i++) {
struct xfrm_state *x = pkt_dev->flows[i].x;
if (x) {
xfrm_state_put(x);
shinfo->gso_segs = 0;
shinfo->gso_type = 0;
shinfo->ip6_frag_id = 0;
+ shinfo->tx_flags.flags = 0;
shinfo->frag_list = NULL;
+ memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
memset(skb, 0, offsetof(struct sk_buff, tail));
skb->data = skb->head + NET_SKB_PAD;
static inline struct page *linear_to_page(struct page *page, unsigned int *len,
unsigned int *offset,
- struct sk_buff *skb)
+ struct sk_buff *skb, struct sock *sk)
{
- struct sock *sk = skb->sk;
struct page *p = sk->sk_sndmsg_page;
unsigned int off;
*/
static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
unsigned int *len, unsigned int offset,
- struct sk_buff *skb, int linear)
+ struct sk_buff *skb, int linear,
+ struct sock *sk)
{
if (unlikely(spd->nr_pages == PIPE_BUFFERS))
return 1;
if (linear) {
- page = linear_to_page(page, len, &offset, skb);
+ page = linear_to_page(page, len, &offset, skb, sk);
if (!page)
return 1;
} else
static inline int __splice_segment(struct page *page, unsigned int poff,
unsigned int plen, unsigned int *off,
unsigned int *len, struct sk_buff *skb,
- struct splice_pipe_desc *spd, int linear)
+ struct splice_pipe_desc *spd, int linear,
+ struct sock *sk)
{
if (!*len)
return 1;
/* the linear region may spread across several pages */
flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
- if (spd_fill_page(spd, page, &flen, poff, skb, linear))
+ if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk))
return 1;
__segment_seek(&page, &poff, &plen, flen);
* pipe is full or if we already spliced the requested length.
*/
static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
- unsigned int *len,
- struct splice_pipe_desc *spd)
+ unsigned int *len, struct splice_pipe_desc *spd,
+ struct sock *sk)
{
int seg;
if (__splice_segment(virt_to_page(skb->data),
(unsigned long) skb->data & (PAGE_SIZE - 1),
skb_headlen(skb),
- offset, len, skb, spd, 1))
+ offset, len, skb, spd, 1, sk))
return 1;
/*
const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
if (__splice_segment(f->page, f->page_offset, f->size,
- offset, len, skb, spd, 0))
+ offset, len, skb, spd, 0, sk))
return 1;
}
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
};
+ struct sock *sk = skb->sk;
/*
* __skb_splice_bits() only fails if the output has no room left,
* so no point in going over the frag_list for the error case.
*/
- if (__skb_splice_bits(skb, &offset, &tlen, &spd))
+ if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk))
goto done;
else if (!tlen)
goto done;
struct sk_buff *list = skb_shinfo(skb)->frag_list;
for (; list && tlen; list = list->next) {
- if (__skb_splice_bits(list, &offset, &tlen, &spd))
+ if (__skb_splice_bits(list, &offset, &tlen, &spd, sk))
break;
}
}
done:
if (spd.nr_pages) {
- struct sock *sk = skb->sk;
int ret;
/*
next_skb:
block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
- if (abs_offset < block_limit) {
+ if (abs_offset < block_limit && !st->frag_data) {
*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
return block_limit - abs_offset;
}
If unsure, say Y.
config INET_LRO
- tristate "Large Receive Offload (ipv4/tcp)"
-
+ bool "Large Receive Offload (ipv4/tcp)"
+ default y
---help---
Support for Large Receive Offload (ipv4/tcp).
static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
{
int wasfull;
- t_key cindex, key = tn->key;
+ t_key cindex, key;
struct tnode *tp;
+ preempt_disable();
+ key = tn->key;
+
while (tn != NULL && (tp = node_parent((struct node *)tn)) != NULL) {
cindex = tkey_extract_bits(key, tp->pos, tp->bits);
wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
if (IS_TNODE(tn))
tn = (struct tnode *)resize(t, (struct tnode *)tn);
+ preempt_enable();
return (struct node *)tn;
}
__be32 root_server_addr = NONE; /* Address of NFS server */
u8 root_server_path[256] = { 0, }; /* Path to mount as root */
+u32 ic_dev_xid; /* Device under configuration */
+
/* vendor class identifier */
static char vendor_class_identifier[253] __initdata;
goto drop_unlock;
}
+ /* Is it a reply for the device we are configuring? */
+ if (b->xid != ic_dev_xid) {
+ if (net_ratelimit())
+ printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n");
+ goto drop_unlock;
+ }
+
/* Parse extensions */
if (ext_len >= 4 &&
!memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */
get_random_bytes(&timeout, sizeof(timeout));
timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM);
for (;;) {
+ /* Track the device we are configuring */
+ ic_dev_xid = d->xid;
+
#ifdef IPCONFIG_BOOTP
if (do_bootp && (d->able & IC_BOOTP))
ic_bootp_send_if(d, jiffies - start_jiffies);
indev = in ? in->name : nulldevname;
outdev = out ? out->name : nulldevname;
- rcu_read_lock_bh();
- private = rcu_dereference(table->private);
- table_base = rcu_dereference(private->entries[smp_processor_id()]);
+ xt_info_rdlock_bh();
+ private = table->private;
+ table_base = private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
back = get_entry(table_base, private->underflow[hook]);
hdr_len = sizeof(*arp) + (2 * sizeof(struct in_addr)) +
(2 * skb->dev->addr_len);
+
ADD_COUNTER(e->counters, hdr_len, 1);
t = arpt_get_target(e);
e = (void *)e + e->next_offset;
}
} while (!hotdrop);
-
- rcu_read_unlock_bh();
+ xt_info_rdunlock_bh();
if (hotdrop)
return NF_DROP;
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU
- * We dont care about preemption here.
+ *
+ * Bottom half has to be disabled to prevent deadlock
+ * if new softirq were to run and call ipt_do_table
*/
- curcpu = raw_smp_processor_id();
+ local_bh_disable();
+ curcpu = smp_processor_id();
i = 0;
ARPT_ENTRY_ITERATE(t->entries[curcpu],
if (cpu == curcpu)
continue;
i = 0;
+ xt_info_wrlock(cpu);
ARPT_ENTRY_ITERATE(t->entries[cpu],
t->size,
add_entry_to_counter,
counters,
&i);
+ xt_info_wrunlock(cpu);
}
-}
-
-
-/* We're lazy, and add to the first CPU; overflow works its fey magic
- * and everything is OK. */
-static int
-add_counter_to_entry(struct arpt_entry *e,
- const struct xt_counters addme[],
- unsigned int *i)
-{
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
- (*i)++;
- return 0;
-}
-
-/* Take values from counters and add them back onto the current cpu */
-static void put_counters(struct xt_table_info *t,
- const struct xt_counters counters[])
-{
- unsigned int i, cpu;
-
- local_bh_disable();
- cpu = smp_processor_id();
- i = 0;
- ARPT_ENTRY_ITERATE(t->entries[cpu],
- t->size,
- add_counter_to_entry,
- counters,
- &i);
local_bh_enable();
}
-static inline int
-zero_entry_counter(struct arpt_entry *e, void *arg)
-{
- e->counters.bcnt = 0;
- e->counters.pcnt = 0;
- return 0;
-}
-
-static void
-clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info)
-{
- unsigned int cpu;
- const void *loc_cpu_entry = info->entries[raw_smp_processor_id()];
-
- memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
- for_each_possible_cpu(cpu) {
- memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size);
- ARPT_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size,
- zero_entry_counter, NULL);
- }
-}
-
static struct xt_counters *alloc_counters(struct xt_table *table)
{
unsigned int countersize;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
- struct xt_table_info *info;
/* We need atomic snapshot of counters: rest doesn't change
* (other than comefrom, which userspace doesn't care
counters = vmalloc_node(countersize, numa_node_id());
if (counters == NULL)
- goto nomem;
-
- info = xt_alloc_table_info(private->size);
- if (!info)
- goto free_counters;
-
- clone_counters(info, private);
-
- mutex_lock(&table->lock);
- xt_table_entry_swap_rcu(private, info);
- synchronize_net(); /* Wait until smoke has cleared */
+ return ERR_PTR(-ENOMEM);
- get_counters(info, counters);
- put_counters(private, counters);
- mutex_unlock(&table->lock);
-
- xt_free_table_info(info);
+ get_counters(private, counters);
return counters;
-
- free_counters:
- vfree(counters);
- nomem:
- return ERR_PTR(-ENOMEM);
}
static int copy_entries_to_user(unsigned int total_size,
(newinfo->number <= oldinfo->initial_entries))
module_put(t->me);
- /* Get the old counters. */
+ /* Get the old counters, and synchronize with replace */
get_counters(oldinfo, counters);
+
/* Decrease module usage counts and free resource */
loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()];
ARPT_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry,
return ret;
}
+/* We're lazy, and add to the first CPU; overflow works its fey magic
+ * and everything is OK. */
+static int
+add_counter_to_entry(struct arpt_entry *e,
+ const struct xt_counters addme[],
+ unsigned int *i)
+{
+ ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
+
+ (*i)++;
+ return 0;
+}
+
static int do_add_counters(struct net *net, void __user *user, unsigned int len,
int compat)
{
- unsigned int i;
+ unsigned int i, curcpu;
struct xt_counters_info tmp;
struct xt_counters *paddc;
unsigned int num_counters;
goto free;
}
- mutex_lock(&t->lock);
+ local_bh_disable();
private = t->private;
if (private->number != num_counters) {
ret = -EINVAL;
goto unlock_up_free;
}
- preempt_disable();
i = 0;
/* Choose the copy that is on our node */
- loc_cpu_entry = private->entries[smp_processor_id()];
+ curcpu = smp_processor_id();
+ loc_cpu_entry = private->entries[curcpu];
+ xt_info_wrlock(curcpu);
ARPT_ENTRY_ITERATE(loc_cpu_entry,
private->size,
add_counter_to_entry,
paddc,
&i);
- preempt_enable();
+ xt_info_wrunlock(curcpu);
unlock_up_free:
- mutex_unlock(&t->lock);
-
+ local_bh_enable();
xt_table_unlock(t);
module_put(t->me);
free:
tgpar.hooknum = hook;
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-
- rcu_read_lock_bh();
- private = rcu_dereference(table->private);
- table_base = rcu_dereference(private->entries[smp_processor_id()]);
+ xt_info_rdlock_bh();
+ private = table->private;
+ table_base = private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
e = (void *)e + e->next_offset;
}
} while (!hotdrop);
-
- rcu_read_unlock_bh();
+ xt_info_rdunlock_bh();
#ifdef DEBUG_ALLOW_ALL
return NF_ACCEPT;
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
- * with data used by 'current' CPU
- * We dont care about preemption here.
+ * with data used by 'current' CPU.
+ *
+ * Bottom half has to be disabled to prevent deadlock
+ * if new softirq were to run and call ipt_do_table
*/
- curcpu = raw_smp_processor_id();
+ local_bh_disable();
+ curcpu = smp_processor_id();
i = 0;
IPT_ENTRY_ITERATE(t->entries[curcpu],
if (cpu == curcpu)
continue;
i = 0;
+ xt_info_wrlock(cpu);
IPT_ENTRY_ITERATE(t->entries[cpu],
t->size,
add_entry_to_counter,
counters,
&i);
+ xt_info_wrunlock(cpu);
}
-
-}
-
-/* We're lazy, and add to the first CPU; overflow works its fey magic
- * and everything is OK. */
-static int
-add_counter_to_entry(struct ipt_entry *e,
- const struct xt_counters addme[],
- unsigned int *i)
-{
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
- (*i)++;
- return 0;
-}
-
-/* Take values from counters and add them back onto the current cpu */
-static void put_counters(struct xt_table_info *t,
- const struct xt_counters counters[])
-{
- unsigned int i, cpu;
-
- local_bh_disable();
- cpu = smp_processor_id();
- i = 0;
- IPT_ENTRY_ITERATE(t->entries[cpu],
- t->size,
- add_counter_to_entry,
- counters,
- &i);
local_bh_enable();
}
-
-static inline int
-zero_entry_counter(struct ipt_entry *e, void *arg)
-{
- e->counters.bcnt = 0;
- e->counters.pcnt = 0;
- return 0;
-}
-
-static void
-clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info)
-{
- unsigned int cpu;
- const void *loc_cpu_entry = info->entries[raw_smp_processor_id()];
-
- memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
- for_each_possible_cpu(cpu) {
- memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size);
- IPT_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size,
- zero_entry_counter, NULL);
- }
-}
-
static struct xt_counters * alloc_counters(struct xt_table *table)
{
unsigned int countersize;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
- struct xt_table_info *info;
/* We need atomic snapshot of counters: rest doesn't change
(other than comefrom, which userspace doesn't care
counters = vmalloc_node(countersize, numa_node_id());
if (counters == NULL)
- goto nomem;
+ return ERR_PTR(-ENOMEM);
- info = xt_alloc_table_info(private->size);
- if (!info)
- goto free_counters;
-
- clone_counters(info, private);
-
- mutex_lock(&table->lock);
- xt_table_entry_swap_rcu(private, info);
- synchronize_net(); /* Wait until smoke has cleared */
-
- get_counters(info, counters);
- put_counters(private, counters);
- mutex_unlock(&table->lock);
-
- xt_free_table_info(info);
+ get_counters(private, counters);
return counters;
-
- free_counters:
- vfree(counters);
- nomem:
- return ERR_PTR(-ENOMEM);
}
static int
(newinfo->number <= oldinfo->initial_entries))
module_put(t->me);
- /* Get the old counters. */
+ /* Get the old counters, and synchronize with replace */
get_counters(oldinfo, counters);
+
/* Decrease module usage counts and free resource */
loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()];
IPT_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry,
return ret;
}
+/* We're lazy, and add to the first CPU; overflow works its fey magic
+ * and everything is OK. */
+static int
+add_counter_to_entry(struct ipt_entry *e,
+ const struct xt_counters addme[],
+ unsigned int *i)
+{
+ ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
+
+ (*i)++;
+ return 0;
+}
static int
do_add_counters(struct net *net, void __user *user, unsigned int len, int compat)
{
- unsigned int i;
+ unsigned int i, curcpu;
struct xt_counters_info tmp;
struct xt_counters *paddc;
unsigned int num_counters;
goto free;
}
- mutex_lock(&t->lock);
+ local_bh_disable();
private = t->private;
if (private->number != num_counters) {
ret = -EINVAL;
goto unlock_up_free;
}
- preempt_disable();
i = 0;
/* Choose the copy that is on our node */
- loc_cpu_entry = private->entries[raw_smp_processor_id()];
+ curcpu = smp_processor_id();
+ loc_cpu_entry = private->entries[curcpu];
+ xt_info_wrlock(curcpu);
IPT_ENTRY_ITERATE(loc_cpu_entry,
private->size,
add_counter_to_entry,
paddc,
&i);
- preempt_enable();
+ xt_info_wrunlock(curcpu);
unlock_up_free:
- mutex_unlock(&t->lock);
+ local_bh_enable();
xt_table_unlock(t);
module_put(t->me);
free:
minip = ntohl(range->min_ip);
maxip = ntohl(range->max_ip);
j = jhash_2words((__force u32)tuple->src.u3.ip,
- (__force u32)tuple->dst.u3.ip, 0);
+ range->flags & IP_NAT_RANGE_PERSISTENT ?
+ (__force u32)tuple->dst.u3.ip : 0, 0);
j = ((u64)j * (maxip - minip + 1)) >> 32;
*var_ipp = htonl(minip + j);
}
{
static unsigned int rover;
unsigned int i = rover, goal;
- struct rtable *rth, **rthp;
- unsigned long length = 0, samples = 0;
+ struct rtable *rth, *aux, **rthp;
+ unsigned long samples = 0;
unsigned long sum = 0, sum2 = 0;
u64 mult;
goal = (unsigned int)mult;
if (goal > rt_hash_mask)
goal = rt_hash_mask + 1;
- length = 0;
for (; goal > 0; goal--) {
unsigned long tmo = ip_rt_gc_timeout;
+ unsigned long length;
i = (i + 1) & rt_hash_mask;
rthp = &rt_hash_table[i].chain;
if (*rthp == NULL)
continue;
+ length = 0;
spin_lock_bh(rt_hash_lock_addr(i));
while ((rth = *rthp) != NULL) {
+ prefetch(rth->u.dst.rt_next);
if (rt_is_expired(rth)) {
*rthp = rth->u.dst.rt_next;
rt_free(rth);
if (rth->u.dst.expires) {
/* Entry is expired even if it is in use */
if (time_before_eq(jiffies, rth->u.dst.expires)) {
+nofree:
tmo >>= 1;
rthp = &rth->u.dst.rt_next;
/*
- * Only bump our length if the hash
- * inputs on entries n and n+1 are not
- * the same, we only count entries on
+ * We only count entries on
* a chain with equal hash inputs once
* so that entries for different QOS
* levels, and other non-hash input
* attributes don't unfairly skew
* the length computation
*/
- if ((*rthp == NULL) ||
- !compare_hash_inputs(&(*rthp)->fl,
- &rth->fl))
- length += ONE;
+ for (aux = rt_hash_table[i].chain;;) {
+ if (aux == rth) {
+ length += ONE;
+ break;
+ }
+ if (compare_hash_inputs(&aux->fl, &rth->fl))
+ break;
+ aux = aux->u.dst.rt_next;
+ }
continue;
}
- } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) {
- tmo >>= 1;
- rthp = &rth->u.dst.rt_next;
- if ((*rthp == NULL) ||
- !compare_hash_inputs(&(*rthp)->fl,
- &rth->fl))
- length += ONE;
- continue;
- }
+ } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout))
+ goto nofree;
/* Cleanup aged off entries. */
*rthp = rth->u.dst.rt_next;
static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp)
{
struct rtable *rth, **rthp;
- struct rtable *rthi;
unsigned long now;
struct rtable *cand, **candp;
u32 min_score;
}
rthp = &rt_hash_table[hash].chain;
- rthi = NULL;
spin_lock_bh(rt_hash_lock_addr(hash));
while ((rth = *rthp) != NULL) {
chain_length++;
rthp = &rth->u.dst.rt_next;
-
- /*
- * check to see if the next entry in the chain
- * contains the same hash input values as rt. If it does
- * This is where we will insert into the list, instead of
- * at the head. This groups entries that differ by aspects not
- * relvant to the hash function together, which we use to adjust
- * our chain length
- */
- if (*rthp && compare_hash_inputs(&(*rthp)->fl, &rt->fl))
- rthi = rth;
}
if (cand) {
}
}
- if (rthi)
- rt->u.dst.rt_next = rthi->u.dst.rt_next;
- else
- rt->u.dst.rt_next = rt_hash_table[hash].chain;
+ rt->u.dst.rt_next = rt_hash_table[hash].chain;
#if RT_CACHE_DEBUG >= 2
if (rt->u.dst.rt_next) {
* previous writes to rt are comitted to memory
* before making rt visible to other CPUS.
*/
- if (rthi)
- rcu_assign_pointer(rthi->u.dst.rt_next, rt);
- else
- rcu_assign_pointer(rt_hash_table[hash].chain, rt);
+ rcu_assign_pointer(rt_hash_table[hash].chain, rt);
spin_unlock_bh(rt_hash_lock_addr(hash));
*rp = rt;
0,
&rt_hash_log,
&rt_hash_mask,
- 0);
+ rhash_entries ? 0 : 512 * 1024);
memset(rt_hash_table, 0, (rt_hash_mask + 1) * sizeof(struct rt_hash_bucket));
rt_hash_lock_init();
struct task_struct *user_recv = NULL;
int copied_early = 0;
struct sk_buff *skb;
+ u32 urg_hole = 0;
lock_sock(sk);
}
}
}
- if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) {
+ if ((flags & MSG_PEEK) &&
+ (peek_seq - copied - urg_hole != tp->copied_seq)) {
if (net_ratelimit())
printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n",
current->comm, task_pid_nr(current));
if (!urg_offset) {
if (!sock_flag(sk, SOCK_URGINLINE)) {
++*seq;
+ urg_hole++;
offset++;
used--;
if (!used)
struct sk_buff *p;
struct tcphdr *th;
struct tcphdr *th2;
+ unsigned int len;
unsigned int thlen;
unsigned int flags;
unsigned int mss = 1;
skb_gro_pull(skb, thlen);
+ len = skb_gro_len(skb);
flags = tcp_flag_word(th);
for (; (p = *head); head = &p->next) {
mss = skb_shinfo(p)->gso_size;
- flush |= (skb_gro_len(skb) > mss) | !skb_gro_len(skb);
+ flush |= (len > mss) | !len;
flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq);
if (flush || skb_gro_receive(head, skb)) {
tcp_flag_word(th2) |= flags & (TCP_FLAG_FIN | TCP_FLAG_PSH);
out_check_final:
- flush = skb_gro_len(skb) < mss;
+ flush = len < mss;
flush |= flags & (TCP_FLAG_URG | TCP_FLAG_PSH | TCP_FLAG_RST |
TCP_FLAG_SYN | TCP_FLAG_FIN);
tcp_grow_window(sk, skb);
}
-static u32 tcp_rto_min(struct sock *sk)
-{
- struct dst_entry *dst = __sk_dst_get(sk);
- u32 rto_min = TCP_RTO_MIN;
-
- if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
- rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
- return rto_min;
-}
-
/* Called to compute a smoothed rtt estimate. The data fed to this
* routine either comes from timestamps, or from segments that were
* known _not_ to have been retransmitted [see Karn/Partridge
tcp_set_rto(sk);
if (inet_csk(sk)->icsk_rto < TCP_TIMEOUT_INIT && !tp->rx_opt.saw_tstamp)
goto reset;
+
+cwnd:
tp->snd_cwnd = tcp_init_cwnd(tp, dst);
tp->snd_cwnd_stamp = tcp_time_stamp;
return;
tp->mdev = tp->mdev_max = tp->rttvar = TCP_TIMEOUT_INIT;
inet_csk(sk)->icsk_rto = TCP_TIMEOUT_INIT;
}
+ goto cwnd;
}
static void tcp_update_reordering(struct sock *sk, const int metric,
if (tp->lost_skb_hint &&
before(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(tp->lost_skb_hint)->seq) &&
- (tcp_is_fack(tp) || TCP_SKB_CB(skb)->sacked))
+ (tcp_is_fack(tp) || (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED)))
tp->lost_cnt_hint -= decr;
tcp_verify_left_out(tp);
}
EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event);
+static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp)
+{
+ return min(tp->snd_ssthresh, tp->snd_cwnd-1);
+}
+
static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
{
struct tcp_sock *tp = tcp_sk(sk);
*/
diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
- if (diff > gamma && tp->snd_ssthresh > 2 ) {
+ if (diff > gamma && tp->snd_cwnd <= tp->snd_ssthresh) {
/* Going too fast. Time to slow down
* and switch to congestion avoidance.
*/
- tp->snd_ssthresh = 2;
/* Set cwnd to match the actual rate
* exactly:
* utilization.
*/
tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
+ tp->snd_ssthresh = tcp_vegas_ssthresh(tp);
} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
* we slow down.
*/
tp->snd_cwnd--;
+ tp->snd_ssthresh
+ = tcp_vegas_ssthresh(tp);
} else if (diff < alpha) {
/* We don't have enough extra packets
* in the network, so speed up.
return error;
}
-int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
+static int ipv4_rcv_saddr_equal(const struct sock *sk1, const struct sock *sk2)
{
struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
EXPORT_SYMBOL(udp_lib_setsockopt);
EXPORT_SYMBOL(udp_poll);
EXPORT_SYMBOL(udp_lib_get_port);
-EXPORT_SYMBOL(ipv4_rcv_saddr_equal);
#ifdef CONFIG_PROC_FS
EXPORT_SYMBOL(udp_proc_register);
default:
goto sticky_done;
}
-
- if ((rthdr->hdrlen & 1) ||
- (rthdr->hdrlen >> 1) != rthdr->segments_left)
- goto sticky_done;
}
retv = 0;
IP_NF_ASSERT(table->valid_hooks & (1 << hook));
- rcu_read_lock_bh();
- private = rcu_dereference(table->private);
- table_base = rcu_dereference(private->entries[smp_processor_id()]);
+ xt_info_rdlock_bh();
+ private = table->private;
+ table_base = private->entries[smp_processor_id()];
e = get_entry(table_base, private->hook_entry[hook]);
#ifdef CONFIG_NETFILTER_DEBUG
((struct ip6t_entry *)table_base)->comefrom = NETFILTER_LINK_POISON;
#endif
- rcu_read_unlock_bh();
+ xt_info_rdunlock_bh();
#ifdef DEBUG_ALLOW_ALL
return NF_ACCEPT;
/* Instead of clearing (by a previous call to memset())
* the counters and using adds, we set the counters
* with data used by 'current' CPU
- * We dont care about preemption here.
+ *
+ * Bottom half has to be disabled to prevent deadlock
+ * if new softirq were to run and call ipt_do_table
*/
- curcpu = raw_smp_processor_id();
+ local_bh_disable();
+ curcpu = smp_processor_id();
i = 0;
IP6T_ENTRY_ITERATE(t->entries[curcpu],
if (cpu == curcpu)
continue;
i = 0;
+ xt_info_wrlock(cpu);
IP6T_ENTRY_ITERATE(t->entries[cpu],
t->size,
add_entry_to_counter,
counters,
&i);
+ xt_info_wrunlock(cpu);
}
-}
-
-/* We're lazy, and add to the first CPU; overflow works its fey magic
- * and everything is OK. */
-static int
-add_counter_to_entry(struct ip6t_entry *e,
- const struct xt_counters addme[],
- unsigned int *i)
-{
- ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
-
- (*i)++;
- return 0;
-}
-
-/* Take values from counters and add them back onto the current cpu */
-static void put_counters(struct xt_table_info *t,
- const struct xt_counters counters[])
-{
- unsigned int i, cpu;
-
- local_bh_disable();
- cpu = smp_processor_id();
- i = 0;
- IP6T_ENTRY_ITERATE(t->entries[cpu],
- t->size,
- add_counter_to_entry,
- counters,
- &i);
local_bh_enable();
}
-static inline int
-zero_entry_counter(struct ip6t_entry *e, void *arg)
-{
- e->counters.bcnt = 0;
- e->counters.pcnt = 0;
- return 0;
-}
-
-static void
-clone_counters(struct xt_table_info *newinfo, const struct xt_table_info *info)
-{
- unsigned int cpu;
- const void *loc_cpu_entry = info->entries[raw_smp_processor_id()];
-
- memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
- for_each_possible_cpu(cpu) {
- memcpy(newinfo->entries[cpu], loc_cpu_entry, info->size);
- IP6T_ENTRY_ITERATE(newinfo->entries[cpu], newinfo->size,
- zero_entry_counter, NULL);
- }
-}
-
static struct xt_counters *alloc_counters(struct xt_table *table)
{
unsigned int countersize;
struct xt_counters *counters;
struct xt_table_info *private = table->private;
- struct xt_table_info *info;
/* We need atomic snapshot of counters: rest doesn't change
(other than comefrom, which userspace doesn't care
counters = vmalloc_node(countersize, numa_node_id());
if (counters == NULL)
- goto nomem;
-
- info = xt_alloc_table_info(private->size);
- if (!info)
- goto free_counters;
-
- clone_counters(info, private);
-
- mutex_lock(&table->lock);
- xt_table_entry_swap_rcu(private, info);
- synchronize_net(); /* Wait until smoke has cleared */
+ return ERR_PTR(-ENOMEM);
- get_counters(info, counters);
- put_counters(private, counters);
- mutex_unlock(&table->lock);
+ get_counters(private, counters);
- xt_free_table_info(info);
-
- free_counters:
- vfree(counters);
- nomem:
- return ERR_PTR(-ENOMEM);
+ return counters;
}
static int
(newinfo->number <= oldinfo->initial_entries))
module_put(t->me);
- /* Get the old counters. */
+ /* Get the old counters, and synchronize with replace */
get_counters(oldinfo, counters);
+
/* Decrease module usage counts and free resource */
loc_cpu_old_entry = oldinfo->entries[raw_smp_processor_id()];
IP6T_ENTRY_ITERATE(loc_cpu_old_entry, oldinfo->size, cleanup_entry,
return ret;
}
+/* We're lazy, and add to the first CPU; overflow works its fey magic
+ * and everything is OK. */
+static int
+add_counter_to_entry(struct ip6t_entry *e,
+ const struct xt_counters addme[],
+ unsigned int *i)
+{
+ ADD_COUNTER(e->counters, addme[*i].bcnt, addme[*i].pcnt);
+
+ (*i)++;
+ return 0;
+}
+
static int
do_add_counters(struct net *net, void __user *user, unsigned int len,
int compat)
{
- unsigned int i;
+ unsigned int i, curcpu;
struct xt_counters_info tmp;
struct xt_counters *paddc;
unsigned int num_counters;
goto free;
}
- mutex_lock(&t->lock);
+
+ local_bh_disable();
private = t->private;
if (private->number != num_counters) {
ret = -EINVAL;
goto unlock_up_free;
}
- preempt_disable();
i = 0;
/* Choose the copy that is on our node */
- loc_cpu_entry = private->entries[raw_smp_processor_id()];
+ curcpu = smp_processor_id();
+ xt_info_wrlock(curcpu);
+ loc_cpu_entry = private->entries[curcpu];
IP6T_ENTRY_ITERATE(loc_cpu_entry,
private->size,
add_counter_to_entry,
paddc,
&i);
- preempt_enable();
+ xt_info_wrunlock(curcpu);
+
unlock_up_free:
- mutex_unlock(&t->lock);
+ local_bh_enable();
xt_table_unlock(t);
module_put(t->me);
free:
struct ipv6_opt_hdr _hdr;
int hdrlen;
- /* Is there enough space for the next ext header? */
- if (len < (int)sizeof(struct ipv6_opt_hdr))
- return false;
/* No more exthdr -> evaluate */
if (nexthdr == NEXTHDR_NONE) {
temp |= MASK_NONE;
break;
}
+ /* Is there enough space for the next ext header? */
+ if (len < (int)sizeof(struct ipv6_opt_hdr))
+ return false;
/* ESP -> evaluate */
if (nexthdr == NEXTHDR_ESP) {
temp |= MASK_ESP;
}
},
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
+ .rt6i_protocol = RTPROT_KERNEL,
.rt6i_metric = ~(u32) 0,
.rt6i_ref = ATOMIC_INIT(1),
};
}
},
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
+ .rt6i_protocol = RTPROT_KERNEL,
.rt6i_metric = ~(u32) 0,
.rt6i_ref = ATOMIC_INIT(1),
};
}
},
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
+ .rt6i_protocol = RTPROT_KERNEL,
.rt6i_metric = ~(u32) 0,
.rt6i_ref = ATOMIC_INIT(1),
};
{
const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr;
const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2);
+ __be32 sk_rcv_saddr = inet_sk(sk)->rcv_saddr;
+ __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2);
int sk_ipv6only = ipv6_only_sock(sk);
int sk2_ipv6only = inet_v6_ipv6only(sk2);
int addr_type = ipv6_addr_type(sk_rcv_saddr6);
/* if both are mapped, treat as IPv4 */
if (addr_type == IPV6_ADDR_MAPPED && addr_type2 == IPV6_ADDR_MAPPED)
- return ipv4_rcv_saddr_equal(sk, sk2);
+ return (!sk2_ipv6only &&
+ (!sk_rcv_saddr || !sk2_rcv_saddr ||
+ sk_rcv_saddr == sk2_rcv_saddr));
if (addr_type2 == IPV6_ADDR_ANY &&
!(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED))
err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo);
}
+ case IUCV_CLOSING: /* fall through */
sk->sk_state = IUCV_CLOSED;
sk->sk_state_change(sk);
spin_lock_init(&iucv_sk(sk)->message_q.lock);
skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q);
iucv_sk(sk)->send_tag = 0;
+ iucv_sk(sk)->path = NULL;
+ memset(&iucv_sk(sk)->src_user_id , 0, 32);
sk->sk_destruct = iucv_sock_destruct;
sk->sk_sndtimeo = IUCV_CONN_TIMEOUT;
target = sock_rcvlowat(sk, flags & MSG_WAITALL, len);
+ /* receive/dequeue next skb:
+ * the function understands MSG_PEEK and, thus, does not dequeue skb */
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb) {
if (sk->sk_shutdown & RCV_SHUTDOWN)
iucv_process_message_q(sk);
spin_unlock_bh(&iucv->message_q.lock);
}
-
- } else
- skb_queue_head(&sk->sk_receive_queue, skb);
+ }
done:
return err ? : copied;
lock_sock(sk);
switch (sk->sk_state) {
+ case IUCV_DISCONN:
+ case IUCV_CLOSING:
+ case IUCV_SEVERED:
case IUCV_CLOSED:
err = -ENOTCONN;
goto fail;
struct sock_msg_q *save_msg;
int len;
- if (sk->sk_shutdown & RCV_SHUTDOWN)
+ if (sk->sk_shutdown & RCV_SHUTDOWN) {
+ iucv_message_reject(path, msg);
return;
+ }
+
+ spin_lock(&iucv->message_q.lock);
if (!list_empty(&iucv->message_q.list) ||
!skb_queue_empty(&iucv->backlog_skb_q))
if (!skb)
goto save_message;
- spin_lock(&iucv->message_q.lock);
iucv_process_message(sk, skb, path, msg);
- spin_unlock(&iucv->message_q.lock);
+ goto out_unlock;
return;
save_msg->path = path;
save_msg->msg = *msg;
- spin_lock(&iucv->message_q.lock);
list_add_tail(&save_msg->list, &iucv->message_q.list);
+
+out_unlock:
spin_unlock(&iucv->message_q.lock);
}
and show them in debugfs.
If unsure, say N.
-
-config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
- bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
- depends on MAC80211_DEBUG_MENU
- ---help---
- Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
- debug messages.
(chan->max_power - local->power_constr_level) :
chan->max_power;
- if (local->user_power_level)
+ if (local->user_power_level >= 0)
power = min(power, local->user_power_level);
if (local->hw.conf.power_level != power) {
local->hw.conf.long_frame_max_tx_count = 4;
local->hw.conf.short_frame_max_tx_count = 7;
local->hw.conf.radio_enabled = true;
+ local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
if (result < 0)
goto fail_sta_info;
+ result = ieee80211_wep_init(local);
+ if (result < 0) {
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
+ goto fail_wep;
+ }
+
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
goto fail_rate;
}
- result = ieee80211_wep_init(local);
-
- if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
- wiphy_name(local->hw.wiphy), result);
- goto fail_wep;
- }
-
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
result = ieee80211_if_add(local, "wlan%d", NULL,
return 0;
-fail_wep:
- rate_control_deinitialize(local);
fail_rate:
unregister_netdevice(local->mdev);
local->mdev = NULL;
fail_dev:
rtnl_unlock();
+ ieee80211_wep_free(local);
+fail_wep:
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
u8 index, indexn1, indexn2;
struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim;
+ if (unlikely(!tim || elems->tim_len < 4))
+ return false;
+
aid &= 0x3fff;
index = aid / 8;
mask = 1 << (aid & 7);
u.mgd.beacon_loss_work);
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
- "- sending probe request\n", sdata->dev->name,
- sdata->u.mgd.bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM "
+ "- sending probe request\n", sdata->dev->name,
+ sdata->u.mgd.bssid);
+ }
+#endif
ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
(local->hw.conf.flags & IEEE80211_CONF_PS)) &&
time_after(jiffies,
ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) {
- printk(KERN_DEBUG "%s: beacon loss from AP %pM "
- "- sending probe request\n",
- sdata->dev->name, ifmgd->bssid);
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ if (net_ratelimit()) {
+ printk(KERN_DEBUG "%s: beacon loss from AP %pM "
+ "- sending probe request\n",
+ sdata->dev->name, ifmgd->bssid);
+ }
+#endif
ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL;
ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid,
ifmgd->ssid_len, NULL, 0);
for (i = 0; i < elems.ext_supp_rates_len; i++) {
int rate = (elems.ext_supp_rates[i] & 0x7f) * 5;
- bool is_basic = !!(elems.supp_rates[i] & 0x80);
+ bool is_basic = !!(elems.ext_supp_rates[i] & 0x80);
if (rate > 110)
have_higher_than_11mbit = true;
static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
{
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ if (sdata->vif.type == NL80211_IFTYPE_STATION) {
+ /*
+ * Need to update last_beacon to avoid beacon loss
+ * test to trigger.
+ */
+ sdata->u.mgd.last_beacon = jiffies;
+
+
queue_work(sdata->local->hw.workqueue,
&sdata->u.mgd.work);
+ }
}
/* interface setup */
struct ieee80211_local *local =
container_of(work, struct ieee80211_local,
dynamic_ps_enable_work);
+ /* XXX: using scan_sdata is completely broken! */
struct ieee80211_sub_if_data *sdata = local->scan_sdata;
if (local->hw.conf.flags & IEEE80211_CONF_PS)
return;
- if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
+ if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata)
ieee80211_send_nullfunc(local, sdata, 1);
local->hw.conf.flags |= IEEE80211_CONF_PS;
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
- WARN_ON(ieee80211_if_config(sdata, changed));
- ieee80211_bss_info_change_notify(sdata, ~0);
+ /*
+ * Driver's config_interface can fail if rfkill is
+ * enabled. Accommodate this return code.
+ * FIXME: When mac80211 has knowledge of rfkill
+ * state the code below can change back to:
+ * WARN(ieee80211_if_config(sdata, changed));
+ * ieee80211_bss_info_change_notify(sdata, ~0);
+ */
+ if (ieee80211_if_config(sdata, changed))
+ printk(KERN_DEBUG "%s: failed to configure interface during resume\n",
+ sdata->dev->name);
+ else
+ ieee80211_bss_info_change_notify(sdata, ~0);
break;
case NL80211_IFTYPE_WDS:
break;
return NULL;
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
- sband = hw->wiphy->bands[hw->conf.channel->band];
- if (sband->n_bitrates > max_rates)
+ sband = hw->wiphy->bands[i];
+ if (sband && sband->n_bitrates > max_rates)
max_rates = sband->n_bitrates;
}
struct ieee80211_sta *sta, void *priv_sta)
{
struct rc_pid_sta_info *spinfo = priv_sta;
+ struct rc_pid_info *pinfo = priv;
+ struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
struct sta_info *si;
+ int i, j, tmp;
+ bool s;
/* TODO: This routine should consider using RSSI from previous packets
* as we need to have IEEE 802.1X auth succeed immediately after assoc..
* Until that method is implemented, we will use the lowest supported
* rate as a workaround. */
+ /* Sort the rates. This is optimized for the most common case (i.e.
+ * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
+ * mapping too. */
+ for (i = 0; i < sband->n_bitrates; i++) {
+ rinfo[i].index = i;
+ rinfo[i].rev_index = i;
+ if (RC_PID_FAST_START)
+ rinfo[i].diff = 0;
+ else
+ rinfo[i].diff = i * pinfo->norm_offset;
+ }
+ for (i = 1; i < sband->n_bitrates; i++) {
+ s = 0;
+ for (j = 0; j < sband->n_bitrates - i; j++)
+ if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
+ sband->bitrates[rinfo[j + 1].index].bitrate)) {
+ tmp = rinfo[j].index;
+ rinfo[j].index = rinfo[j + 1].index;
+ rinfo[j + 1].index = tmp;
+ rinfo[rinfo[j].index].rev_index = j;
+ rinfo[rinfo[j + 1].index].rev_index = j + 1;
+ s = 1;
+ }
+ if (!s)
+ break;
+ }
+
spinfo->txrate_idx = rate_lowest_index(sband, sta);
/* HACK */
si = container_of(sta, struct sta_info, sta);
struct rc_pid_info *pinfo;
struct rc_pid_rateinfo *rinfo;
struct ieee80211_supported_band *sband;
- int i, j, tmp;
- bool s;
+ int i, max_rates = 0;
#ifdef CONFIG_MAC80211_DEBUGFS
struct rc_pid_debugfs_entries *de;
#endif
- sband = hw->wiphy->bands[hw->conf.channel->band];
-
pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
if (!pinfo)
return NULL;
- /* We can safely assume that sband won't change unless we get
- * reinitialized. */
- rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC);
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+ sband = hw->wiphy->bands[i];
+ if (sband && sband->n_bitrates > max_rates)
+ max_rates = sband->n_bitrates;
+ }
+
+ rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC);
if (!rinfo) {
kfree(pinfo);
return NULL;
pinfo->rinfo = rinfo;
pinfo->oldrate = 0;
- /* Sort the rates. This is optimized for the most common case (i.e.
- * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
- * mapping too. */
- for (i = 0; i < sband->n_bitrates; i++) {
- rinfo[i].index = i;
- rinfo[i].rev_index = i;
- if (RC_PID_FAST_START)
- rinfo[i].diff = 0;
- else
- rinfo[i].diff = i * pinfo->norm_offset;
- }
- for (i = 1; i < sband->n_bitrates; i++) {
- s = 0;
- for (j = 0; j < sband->n_bitrates - i; j++)
- if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
- sband->bitrates[rinfo[j + 1].index].bitrate)) {
- tmp = rinfo[j].index;
- rinfo[j].index = rinfo[j + 1].index;
- rinfo[j + 1].index = tmp;
- rinfo[rinfo[j].index].rev_index = j;
- rinfo[rinfo[j + 1].index].rev_index = j + 1;
- s = 1;
- }
- if (!s)
- break;
- }
-
#ifdef CONFIG_MAC80211_DEBUGFS
de = &pinfo->dentries;
de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
+ struct ieee80211_rx_status *status,
u16 mpdu_seq_num,
int bar_req);
/*
* mac80211. That also explains the __skb_push()
* below.
*/
- align = (unsigned long)skb->data & 4;
+ align = (unsigned long)skb->data & 3;
if (align) {
if (WARN_ON(skb_headroom(skb) < 3)) {
dev_kfree_skb(skb);
/* manage reordering buffer according to requested */
/* sequence number */
rcu_read_lock();
- ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL,
+ ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL,
start_seq_num, 1);
rcu_read_unlock();
return RX_DROP_UNUSABLE;
static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
struct tid_ampdu_rx *tid_agg_rx,
struct sk_buff *skb,
+ struct ieee80211_rx_status *rxstatus,
u16 mpdu_seq_num,
int bar_req)
{
/* put the frame in the reordering buffer */
tid_agg_rx->reorder_buf[index] = skb;
+ memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus,
+ sizeof(*rxstatus));
tid_agg_rx->stored_mpdu_num++;
/* release the buffer until next missing frame */
index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn)
}
static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local,
- struct sk_buff *skb)
+ struct sk_buff *skb,
+ struct ieee80211_rx_status *status)
{
struct ieee80211_hw *hw = &local->hw;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
/* according to mpdu sequence number deal with reordering buffer */
mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4;
- ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb,
+ ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status,
mpdu_seq_num, 0);
end_reorder:
return ret;
return;
}
- if (!ieee80211_rx_reorder_ampdu(local, skb))
+ if (!ieee80211_rx_reorder_ampdu(local, skb, status))
__ieee80211_rx_handle_packet(hw, skb, status, rate);
rcu_read_unlock();
hdrlen = ieee80211_hdrlen(hdr->frame_control);
/* internal error, why is TX_FRAGMENTED set? */
- if (WARN_ON(skb->len <= frag_threshold))
+ if (WARN_ON(skb->len + FCS_LEN <= frag_threshold))
return TX_DROP;
/*
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_channel* chan = local->hw.conf.channel;
+ bool reconf = false;
u32 reconf_flags = 0;
int new_power_level;
if (!chan)
return -EINVAL;
- if (data->txpower.fixed)
- new_power_level = min(data->txpower.value, chan->max_power);
- else /* Automatic power level setting */
- new_power_level = chan->max_power;
+ /* only change when not disabling */
+ if (!data->txpower.disabled) {
+ if (data->txpower.fixed) {
+ if (data->txpower.value < 0)
+ return -EINVAL;
+ new_power_level = data->txpower.value;
+ /*
+ * Debatable, but we cannot do a fixed power
+ * level above the regulatory constraint.
+ * Use "iwconfig wlan0 txpower 15dBm" instead.
+ */
+ if (new_power_level > chan->max_power)
+ return -EINVAL;
+ } else {
+ /*
+ * Automatic power level setting, max being the value
+ * passed in from userland.
+ */
+ if (data->txpower.value < 0)
+ new_power_level = -1;
+ else
+ new_power_level = data->txpower.value;
+ }
+
+ reconf = true;
- local->user_power_level = new_power_level;
- if (local->hw.conf.power_level != new_power_level)
- reconf_flags |= IEEE80211_CONF_CHANGE_POWER;
+ /*
+ * ieee80211_hw_config() will limit to the channel's
+ * max power and possibly power constraint from AP.
+ */
+ local->user_power_level = new_power_level;
+ }
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
- if (reconf_flags)
+ if (reconf || reconf_flags)
ieee80211_hw_config(local, reconf_flags);
return 0;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
frag->value = local->fragmentation_threshold;
- frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD);
+ frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD);
frag->fixed = 1;
return 0;
help
This option enables support for a netlink-based userspace interface
+endif # NF_CONNTRACK
+
# transparent proxy support
config NETFILTER_TPROXY
tristate "Transparent proxying support (EXPERIMENTAL)"
To compile it as a module, choose M here. If unsure, say N.
-endif # NF_CONNTRACK
-
config NETFILTER_XTABLES
tristate "Netfilter Xtables support (required for ip_tables)"
default m if NETFILTER_ADVANCED=n
config NETFILTER_XT_TARGET_LED
tristate '"LED" target support'
- depends on LEDS_CLASS && LED_TRIGGERS
+ depends on LEDS_CLASS && LEDS_TRIGGERS
depends on NETFILTER_ADVANCED
help
This option adds a `LED' target, which allows you to blink LEDs in
depends on NETFILTER_TPROXY
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
+ depends on !NF_CONNTRACK || NF_CONNTRACK
select NF_DEFRAG_IPV4
help
This option adds a `socket' match, which can be used to match
list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
if (cp->af == af &&
ip_vs_addr_equal(af, s_addr, &cp->caddr) &&
- ip_vs_addr_equal(af, d_addr, &cp->vaddr) &&
+ /* protocol should only be IPPROTO_IP if
+ * d_addr is a fwmark */
+ ip_vs_addr_equal(protocol == IPPROTO_IP ? AF_UNSPEC : af,
+ d_addr, &cp->vaddr) &&
s_port == cp->cport && d_port == cp->vport &&
cp->flags & IP_VS_CONN_F_TEMPLATE &&
protocol == cp->protocol) {
cp->cport = cport;
ip_vs_addr_copy(af, &cp->vaddr, vaddr);
cp->vport = vport;
- ip_vs_addr_copy(af, &cp->daddr, daddr);
+ /* proto should only be IPPROTO_IP if d_addr is a fwmark */
+ ip_vs_addr_copy(proto == IPPROTO_IP ? AF_UNSPEC : af,
+ &cp->daddr, daddr);
cp->dport = dport;
cp->flags = flags;
spin_lock_init(&cp->lock);
*/
if (svc->fwmark) {
union nf_inet_addr fwmark = {
- .all = { 0, 0, 0, htonl(svc->fwmark) }
+ .ip = htonl(svc->fwmark)
};
ct = ip_vs_ct_in_get(svc->af, IPPROTO_IP, &snet, 0,
*/
if (svc->fwmark) {
union nf_inet_addr fwmark = {
- .all = { 0, 0, 0, htonl(svc->fwmark) }
+ .ip = htonl(svc->fwmark)
};
ct = ip_vs_conn_new(svc->af, IPPROTO_IP,
struct net *net = nf_ct_exp_net(expect);
struct hlist_node *n;
unsigned int h;
- int ret = 0;
+ int ret = 1;
if (!master_help->helper) {
ret = -ESHUTDOWN;
return ret;
}
-int nf_ct_expect_related(struct nf_conntrack_expect *expect)
+int nf_ct_expect_related_report(struct nf_conntrack_expect *expect,
+ u32 pid, int report)
{
int ret;
spin_lock_bh(&nf_conntrack_lock);
ret = __nf_ct_expect_check(expect);
- if (ret < 0)
+ if (ret <= 0)
goto out;
+ ret = 0;
nf_ct_expect_insert(expect);
- atomic_inc(&expect->use);
- spin_unlock_bh(&nf_conntrack_lock);
- nf_ct_expect_event(IPEXP_NEW, expect);
- nf_ct_expect_put(expect);
- return ret;
-out:
spin_unlock_bh(&nf_conntrack_lock);
+ nf_ct_expect_event_report(IPEXP_NEW, expect, pid, report);
return ret;
-}
-EXPORT_SYMBOL_GPL(nf_ct_expect_related);
-
-int nf_ct_expect_related_report(struct nf_conntrack_expect *expect,
- u32 pid, int report)
-{
- int ret;
-
- spin_lock_bh(&nf_conntrack_lock);
- ret = __nf_ct_expect_check(expect);
- if (ret < 0)
- goto out;
- nf_ct_expect_insert(expect);
out:
spin_unlock_bh(&nf_conntrack_lock);
- if (ret == 0)
- nf_ct_expect_event_report(IPEXP_NEW, expect, pid, report);
return ret;
}
EXPORT_SYMBOL_GPL(nf_ct_expect_related_report);
}
/* Get rid of expecteds, set helpers to NULL. */
- hlist_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
+ hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode)
unhelp(h, me);
for (i = 0; i < nf_conntrack_htable_size; i++) {
hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode)
skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC);
if (!skb)
- return NOTIFY_DONE;
+ goto errout;
b = skb->tail;
nla_put_failure:
rcu_read_unlock();
nlmsg_failure:
- nfnetlink_set_err(0, group, -ENOBUFS);
kfree_skb(skb);
+errout:
+ nfnetlink_set_err(0, group, -ENOBUFS);
return NOTIFY_DONE;
}
#endif /* CONFIG_NF_CONNTRACK_EVENTS */
{
struct nf_conntrack_helper *helper;
struct nf_conn_help *help = nfct_help(ct);
- char *helpname;
+ char *helpname = NULL;
int err;
/* don't change helper of sibling connections */
return 0;
}
-static inline void
-ctnetlink_event_report(struct nf_conn *ct, u32 pid, int report)
-{
- unsigned int events = 0;
-
- if (test_bit(IPS_EXPECTED_BIT, &ct->status))
- events |= IPCT_RELATED;
- else
- events |= IPCT_NEW;
-
- nf_conntrack_event_report(IPCT_STATUS |
- IPCT_HELPER |
- IPCT_REFRESH |
- IPCT_PROTOINFO |
- IPCT_NATSEQADJ |
- IPCT_MARK |
- events,
- ct,
- pid,
- report);
-}
-
static struct nf_conn *
ctnetlink_create_conntrack(struct nlattr *cda[],
struct nf_conntrack_tuple *otuple,
rcu_read_lock();
if (cda[CTA_HELP]) {
- char *helpname;
+ char *helpname = NULL;
err = ctnetlink_parse_help(cda[CTA_HELP], &helpname);
if (err < 0)
err = -ENOENT;
if (nlh->nlmsg_flags & NLM_F_CREATE) {
struct nf_conn *ct;
+ enum ip_conntrack_events events;
ct = ctnetlink_create_conntrack(cda, &otuple,
&rtuple, u3);
err = 0;
nf_conntrack_get(&ct->ct_general);
spin_unlock_bh(&nf_conntrack_lock);
- ctnetlink_event_report(ct,
- NETLINK_CB(skb).pid,
- nlmsg_report(nlh));
+ if (test_bit(IPS_EXPECTED_BIT, &ct->status))
+ events = IPCT_RELATED;
+ else
+ events = IPCT_NEW;
+
+ nf_conntrack_event_report(IPCT_STATUS |
+ IPCT_HELPER |
+ IPCT_PROTOINFO |
+ IPCT_NATSEQADJ |
+ IPCT_MARK | events,
+ ct, NETLINK_CB(skb).pid,
+ nlmsg_report(nlh));
nf_ct_put(ct);
} else
spin_unlock_bh(&nf_conntrack_lock);
if (err == 0) {
nf_conntrack_get(&ct->ct_general);
spin_unlock_bh(&nf_conntrack_lock);
- ctnetlink_event_report(ct,
- NETLINK_CB(skb).pid,
- nlmsg_report(nlh));
+ nf_conntrack_event_report(IPCT_STATUS |
+ IPCT_HELPER |
+ IPCT_PROTOINFO |
+ IPCT_NATSEQADJ |
+ IPCT_MARK,
+ ct, NETLINK_CB(skb).pid,
+ nlmsg_report(nlh));
nf_ct_put(ct);
} else
spin_unlock_bh(&nf_conntrack_lock);
skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!skb)
- return NOTIFY_DONE;
+ goto errout;
b = skb->tail;
nla_put_failure:
rcu_read_unlock();
nlmsg_failure:
- nfnetlink_set_err(0, 0, -ENOBUFS);
kfree_skb(skb);
+errout:
+ nfnetlink_set_err(0, 0, -ENOBUFS);
return NOTIFY_DONE;
}
#endif
#include <linux/netfilter/nfnetlink_conntrack.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_l4proto.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
#include <net/netfilter/nf_log.h>
static DEFINE_RWLOCK(dccp_lock);
ct->proto.dccp.state = new_state;
write_unlock_bh(&dccp_lock);
+ if (new_state != old_state)
+ nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
+
dn = dccp_pernet(net);
nf_ct_refresh_acct(ct, ctinfo, skb, dn->dccp_timeout[new_state]);
if (!nest_parms)
goto nla_put_failure;
NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_STATE, ct->proto.dccp.state);
+ NLA_PUT_U8(skb, CTA_PROTOINFO_DCCP_ROLE,
+ ct->proto.dccp.role[IP_CT_DIR_ORIGINAL]);
nla_nest_end(skb, nest_parms);
read_unlock_bh(&dccp_lock);
return 0;
static const struct nla_policy dccp_nla_policy[CTA_PROTOINFO_DCCP_MAX + 1] = {
[CTA_PROTOINFO_DCCP_STATE] = { .type = NLA_U8 },
+ [CTA_PROTOINFO_DCCP_ROLE] = { .type = NLA_U8 },
};
static int nlattr_to_dccp(struct nlattr *cda[], struct nf_conn *ct)
return err;
if (!tb[CTA_PROTOINFO_DCCP_STATE] ||
- nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]) >= CT_DCCP_IGNORE)
+ !tb[CTA_PROTOINFO_DCCP_ROLE] ||
+ nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) > CT_DCCP_ROLE_MAX ||
+ nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]) >= CT_DCCP_IGNORE) {
return -EINVAL;
+ }
write_lock_bh(&dccp_lock);
ct->proto.dccp.state = nla_get_u8(tb[CTA_PROTOINFO_DCCP_STATE]);
+ if (nla_get_u8(tb[CTA_PROTOINFO_DCCP_ROLE]) == CT_DCCP_ROLE_CLIENT) {
+ ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_CLIENT;
+ ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_SERVER;
+ } else {
+ ct->proto.dccp.role[IP_CT_DIR_ORIGINAL] = CT_DCCP_ROLE_SERVER;
+ ct->proto.dccp.role[IP_CT_DIR_REPLY] = CT_DCCP_ROLE_CLIENT;
+ }
write_unlock_bh(&dccp_lock);
return 0;
}
.print_conntrack = dccp_print_conntrack,
#if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
.to_nlattr = dccp_to_nlattr,
+ .nlattr_size = dccp_nlattr_size,
.from_nlattr = nlattr_to_dccp,
.tuple_to_nlattr = nf_ct_port_tuple_to_nlattr,
.nlattr_tuple_size = nf_ct_port_nlattr_tuple_size,
sender->td_end = end;
sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
}
+ if (tcph->ack) {
+ if (!(sender->flags & IP_CT_TCP_FLAG_MAXACK_SET)) {
+ sender->td_maxack = ack;
+ sender->flags |= IP_CT_TCP_FLAG_MAXACK_SET;
+ } else if (after(ack, sender->td_maxack))
+ sender->td_maxack = ack;
+ }
+
/*
* Update receiver data.
*/
"nf_ct_tcp: invalid state ");
return -NF_ACCEPT;
case TCP_CONNTRACK_CLOSE:
+ if (index == TCP_RST_SET
+ && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
+ && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
+ /* Invalid RST */
+ write_unlock_bh(&tcp_lock);
+ if (LOG_INVALID(net, IPPROTO_TCP))
+ nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
+ "nf_ct_tcp: invalid RST ");
+ return -NF_ACCEPT;
+ }
if (index == TCP_RST_SET
&& ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status)
&& ct->proto.tcp.last_index == TCP_SYN_SET)
.error = udplite_error,
#if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
.tuple_to_nlattr = nf_ct_port_tuple_to_nlattr,
+ .nlattr_tuple_size = nf_ct_port_nlattr_tuple_size,
.nlattr_to_tuple = nf_ct_port_nlattr_to_tuple,
.nla_policy = nf_ct_port_nla_policy,
#endif
int nf_log_register(u_int8_t pf, struct nf_logger *logger)
{
const struct nf_logger *llog;
+ int i;
if (pf >= ARRAY_SIZE(nf_loggers))
return -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(logger->list); i++)
+ INIT_LIST_HEAD(&logger->list[i]);
+
mutex_lock(&nf_log_mutex);
if (pf == NFPROTO_UNSPEC) {
nfnetlink_rcv, NULL, THIS_MODULE);
if (!nfnl) {
printk(KERN_ERR "cannot initialize nfnetlink!\n");
- return -1;
+ return -ENOMEM;
}
return 0;
+ nla_total_size(sizeof(struct nfulnl_msg_packet_hw))
+ nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp));
+ if (in && skb_mac_header_was_set(skb)) {
+ size += nla_total_size(skb->dev->hard_header_len)
+ + nla_total_size(sizeof(u_int16_t)) /* hwtype */
+ + nla_total_size(sizeof(u_int16_t)); /* hwlen */
+ }
+
spin_lock_bh(&inst->lock);
if (inst->flags & NFULNL_CFG_F_SEQ)
}
EXPORT_SYMBOL(xt_free_table_info);
-void xt_table_entry_swap_rcu(struct xt_table_info *oldinfo,
- struct xt_table_info *newinfo)
-{
- unsigned int cpu;
-
- for_each_possible_cpu(cpu) {
- void *p = oldinfo->entries[cpu];
- rcu_assign_pointer(oldinfo->entries[cpu], newinfo->entries[cpu]);
- newinfo->entries[cpu] = p;
- }
-
-}
-EXPORT_SYMBOL_GPL(xt_table_entry_swap_rcu);
-
/* Find table by name, grabs mutex & ref. Returns ERR_PTR() on error. */
struct xt_table *xt_find_table_lock(struct net *net, u_int8_t af,
const char *name)
EXPORT_SYMBOL_GPL(xt_compat_unlock);
#endif
+DEFINE_PER_CPU(struct xt_info_lock, xt_info_locks);
+EXPORT_PER_CPU_SYMBOL_GPL(xt_info_locks);
+
+
struct xt_table_info *
xt_replace_table(struct xt_table *table,
unsigned int num_counters,
struct xt_table_info *newinfo,
int *error)
{
- struct xt_table_info *oldinfo, *private;
+ struct xt_table_info *private;
/* Do the substitution. */
- mutex_lock(&table->lock);
+ local_bh_disable();
private = table->private;
+
/* Check inside lock: is the old number correct? */
if (num_counters != private->number) {
duprintf("num_counters != table->private->number (%u/%u)\n",
num_counters, private->number);
- mutex_unlock(&table->lock);
+ local_bh_enable();
*error = -EAGAIN;
return NULL;
}
- oldinfo = private;
- rcu_assign_pointer(table->private, newinfo);
- newinfo->initial_entries = oldinfo->initial_entries;
- mutex_unlock(&table->lock);
- synchronize_net();
- return oldinfo;
+ table->private = newinfo;
+ newinfo->initial_entries = private->initial_entries;
+
+ /*
+ * Even though table entries have now been swapped, other CPU's
+ * may still be using the old entries. This is okay, because
+ * resynchronization happens because of the locking done
+ * during the get_counters() routine.
+ */
+ local_bh_enable();
+
+ return private;
}
EXPORT_SYMBOL_GPL(xt_replace_table);
/* Simplifies replace_table code. */
table->private = bootstrap;
- mutex_init(&table->lock);
if (!xt_replace_table(table, 0, newinfo, &ret))
goto unlock;
static int __init xt_init(void)
{
- int i, rv;
+ unsigned int i;
+ int rv;
+
+ for_each_possible_cpu(i) {
+ struct xt_info_lock *lock = &per_cpu(xt_info_locks, i);
+ spin_lock_init(&lock->lock);
+ lock->readers = 0;
+ }
xt = kmalloc(sizeof(struct xt_af) * NFPROTO_NUMPROTO, GFP_KERNEL);
if (!xt)
{
struct xt_cluster_match_info *info = par->matchinfo;
- if (info->node_mask >= (1 << info->total_nodes)) {
+ if (info->total_nodes > XT_CLUSTER_NODES_MAX) {
+ printk(KERN_ERR "xt_cluster: you have exceeded the maximum "
+ "number of cluster nodes (%u > %u)\n",
+ info->total_nodes, XT_CLUSTER_NODES_MAX);
+ return false;
+ }
+ if (info->node_mask >= (1ULL << info->total_nodes)) {
printk(KERN_ERR "xt_cluster: this node mask cannot be "
"higher than the total number of nodes\n");
return false;
if (!hlist_empty(&htable->hash[*bucket])) {
hlist_for_each_entry(ent, pos, &htable->hash[*bucket], node)
if (dl_seq_real_show(ent, htable->family, s))
- return 1;
+ return -1;
}
return 0;
}
struct recent_table *t = pde->data;
struct recent_entry *e;
char buf[sizeof("+255.255.255.255")], *c = buf;
- __be32 addr;
+ union nf_inet_addr addr = {};
int add;
if (size > sizeof(buf))
add = 1;
break;
}
- addr = in_aton(c);
+ addr.ip = in_aton(c);
spin_lock_bh(&recent_lock);
- e = recent_entry_lookup(t, (const void *)&addr, NFPROTO_IPV4, 0);
+ e = recent_entry_lookup(t, &addr, NFPROTO_IPV4, 0);
if (e == NULL) {
if (add)
- recent_entry_init(t, (const void *)&addr,
- NFPROTO_IPV4, 0);
+ recent_entry_init(t, &addr, NFPROTO_IPV4, 0);
} else {
if (add)
recent_entry_update(t, e);
{
struct netlbl_af4list *entry;
- entry = netlbl_af4list_search(addr, head);
- if (entry != NULL && entry->addr == addr && entry->mask == mask) {
- netlbl_af4list_remove_entry(entry);
- return entry;
- }
-
- return NULL;
+ entry = netlbl_af4list_search_exact(addr, mask, head);
+ if (entry == NULL)
+ return NULL;
+ netlbl_af4list_remove_entry(entry);
+ return entry;
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
{
struct netlbl_af6list *entry;
- entry = netlbl_af6list_search(addr, head);
- if (entry != NULL &&
- ipv6_addr_equal(&entry->addr, addr) &&
- ipv6_addr_equal(&entry->mask, mask)) {
- netlbl_af6list_remove_entry(entry);
- return entry;
- }
-
- return NULL;
+ entry = netlbl_af6list_search_exact(addr, mask, head);
+ if (entry == NULL)
+ return NULL;
+ netlbl_af6list_remove_entry(entry);
+ return entry;
}
#endif /* IPv6 */
/* Build a packet - the conventional user limit is 236 bytes. We can
do ludicrously large NetROM frames but must not overflow */
- if (len > 65536)
- return -EMSGSIZE;
+ if (len > 65536) {
+ err = -EMSGSIZE;
+ goto out;
+ }
SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n");
size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN;
static inline char *alloc_one_pg_vec_page(unsigned long order)
{
- return (char *) __get_free_pages(GFP_KERNEL | __GFP_COMP | __GFP_ZERO,
- order);
+ gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN;
+
+ return (char *) __get_free_pages(gfp_flags, order);
}
static char **alloc_pg_vec(struct tpacket_req *req, int order)
void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force);
/* stats.c */
-DECLARE_PER_CPU(struct rds_statistics, rds_stats);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats);
#define rds_stats_inc_which(which, member) do { \
per_cpu(which, get_cpu()).member++; \
put_cpu(); \
unsigned char *asmptr;
int n, size, qbit = 0;
- /* ROSE empty frame has no meaning : don't send */
- if (len == 0)
- return 0;
-
if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT))
return -EINVAL;
skb_reset_transport_header(skb);
copied = skb->len;
- /* ROSE empty frame has no meaning : ignore it */
- if (copied == 0) {
- skb_free_datagram(sk, skb);
- return copied;
- }
-
if (copied > size) {
copied = size;
msg->msg_flags |= MSG_TRUNC;
/* not yet present - create a candidate for a new connection
* and then redo the check */
conn = rxrpc_alloc_connection(gfp);
- if (IS_ERR(conn)) {
- _leave(" = %ld", PTR_ERR(conn));
- return PTR_ERR(conn);
+ if (!conn) {
+ _leave(" = -ENOMEM");
+ return -ENOMEM;
}
conn->trans = trans;
/* not yet present - create a candidate for a new connection and then
* redo the check */
candidate = rxrpc_alloc_connection(gfp);
- if (IS_ERR(candidate)) {
- _leave(" = %ld", PTR_ERR(candidate));
- return PTR_ERR(candidate);
+ if (!candidate) {
+ _leave(" = -ENOMEM");
+ return -ENOMEM;
}
candidate->trans = trans;
unsigned long cl;
unsigned long fh;
int err;
+ int tp_created = 0;
if (net != &init_net)
return -EINVAL;
}
tp->ops = tp_ops;
tp->protocol = protocol;
- tp->prio = nprio ? : tcf_auto_prio(*back);
+ tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back));
tp->q = q;
tp->classify = tp_ops->classify;
tp->classid = parent;
goto errout;
}
- spin_lock_bh(root_lock);
- tp->next = *back;
- *back = tp;
- spin_unlock_bh(root_lock);
+ tp_created = 1;
} else if (tca[TCA_KIND] && nla_strcmp(tca[TCA_KIND], tp->ops->kind))
goto errout;
switch (n->nlmsg_type) {
case RTM_NEWTFILTER:
err = -EEXIST;
- if (n->nlmsg_flags & NLM_F_EXCL)
+ if (n->nlmsg_flags & NLM_F_EXCL) {
+ if (tp_created)
+ tcf_destroy(tp);
goto errout;
+ }
break;
case RTM_DELTFILTER:
err = tp->ops->delete(tp, fh);
}
err = tp->ops->change(tp, cl, t->tcm_handle, tca, &fh);
- if (err == 0)
+ if (err == 0) {
+ if (tp_created) {
+ spin_lock_bh(root_lock);
+ tp->next = *back;
+ *back = tp;
+ spin_unlock_bh(root_lock);
+ }
tfilter_notify(skb, n, tp, fh, RTM_NEWTFILTER);
+ } else {
+ if (tp_created)
+ tcf_destroy(tp);
+ }
errout:
if (cl)
struct tcf_result *res)
{
struct cls_cgroup_head *head = tp->root;
- struct cgroup_cls_state *cs;
- int ret = 0;
+ u32 classid;
/*
* Due to the nature of the classifier it is required to ignore all
return -1;
rcu_read_lock();
- cs = task_cls_state(current);
- if (cs->classid && tcf_em_tree_match(skb, &head->ematches, NULL)) {
- res->classid = cs->classid;
- res->class = 0;
- ret = tcf_exts_exec(skb, &head->exts, res);
- } else
- ret = -1;
-
+ classid = task_cls_state(current)->classid;
rcu_read_unlock();
- return ret;
+ if (!classid)
+ return -1;
+
+ if (!tcf_em_tree_match(skb, &head->ematches, NULL))
+ return -1;
+
+ res->classid = classid;
+ res->class = 0;
+ return tcf_exts_exec(skb, &head->exts, res);
}
static unsigned long cls_cgroup_get(struct tcf_proto *tp, u32 handle)
struct tcf_exts e;
int err;
+ if (!tca[TCA_OPTIONS])
+ return -EINVAL;
+
if (head == NULL) {
if (!handle)
return -EINVAL;
META_COLLECTOR(int_vlan_tag)
{
- unsigned short uninitialized_var(tag);
- if (vlan_get_tag(skb, &tag) < 0)
+ unsigned short tag;
+
+ tag = vlan_tx_tag_get(skb);
+ if (!tag && __vlan_get_tag(skb, &tag))
*err = -1;
else
dst->value = tag;
u32 limit = qdisc_dev(sch)->tx_queue_len ? : 1;
if (sch->ops == &bfifo_qdisc_ops)
- limit *= qdisc_dev(sch)->mtu;
+ limit *= psched_mtu(qdisc_dev(sch));
q->limit = limit;
} else {
if (unlikely(!skb))
return NULL;
+#ifdef CONFIG_NET_CLS_ACT
+ /*
+ * If it's at ingress let's pretend the delay is
+ * from the network (tstamp will be updated).
+ */
+ if (G_TC_FROM(skb->tc_verd) & AT_INGRESS)
+ skb->tstamp.tv64 = 0;
+#endif
pr_debug("netem_dequeue: return skb=%p\n", skb);
sch->q.qlen--;
return skb;
switch (teql_resolve(skb, skb_res, slave)) {
case 0:
if (__netif_tx_trylock(slave_txq)) {
+ unsigned int length = qdisc_pkt_len(skb);
+
if (!netif_tx_queue_stopped(slave_txq) &&
!netif_tx_queue_frozen(slave_txq) &&
slave_ops->ndo_start_xmit(skb, slave) == 0) {
master->slaves = NEXT_SLAVE(q);
netif_wake_queue(dev);
master->stats.tx_packets++;
- master->stats.tx_bytes +=
- qdisc_pkt_len(skb);
+ master->stats.tx_bytes += length;
return 0;
}
__netif_tx_unlock(slave_txq);
lock_sock(sock->sk);
sock->sk->sk_sndbuf = snd * 2;
sock->sk->sk_rcvbuf = rcv * 2;
+ sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
release_sock(sock->sk);
#endif
}
test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
+ if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
+ /* sndbuf needs to have room for one request
+ * per thread, otherwise we can stall even when the
+ * network isn't a bottleneck.
+ *
+ * We count all threads rather than threads in a
+ * particular pool, which provides an upper bound
+ * on the number of threads which will access the socket.
+ *
+ * rcvbuf just needs to be able to hold a few requests.
+ * Normally they will be removed from the queue
+ * as soon a a complete request arrives.
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ (serv->sv_nrthreads+3) * serv->sv_max_mesg,
+ 3 * serv->sv_max_mesg);
+
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
/* Receive data. If we haven't got the record length yet, get
tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
+ /* initialise setting must have enough space to
+ * receive and respond to one request.
+ * svc_tcp_recvfrom will re-adjust if necessary
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
+
+ set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state != TCP_ESTABLISHED)
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
/* Initialize the socket */
if (sock->type == SOCK_DGRAM)
svc_udp_init(svsk, serv);
- else {
- /* initialise setting must have enough space to
- * receive and respond to one request.
- */
- svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg,
- 4 * serv->sv_max_mesg);
+ else
svc_tcp_init(svsk, serv);
- }
dprintk("svc: svc_setup_socket created %p (inet %p)\n",
svsk, svsk->sk_sk);
if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
goto out_abort;
spin_unlock(&xprt->transport_lock);
- if (xprt_connecting(xprt))
- xprt_release_write(xprt, NULL);
- else
- queue_work(rpciod_workqueue, &xprt->task_cleanup);
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ queue_work(rpciod_workqueue, &xprt->task_cleanup);
return;
out_abort:
spin_unlock(&xprt->transport_lock);
frmr->page_list->page_list[page_no] =
ib_dma_map_single(xprt->sc_cm_id->device,
page_address(rqstp->rq_arg.pages[page_no]),
- PAGE_SIZE, DMA_TO_DEVICE);
+ PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
goto fatal_err;
page_bytes -= sge_bytes;
frmr->page_list->page_list[page_no] =
- ib_dma_map_page(xprt->sc_cm_id->device, page, 0,
+ ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page),
PAGE_SIZE, DMA_TO_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
fatal_err:
printk("svcrdma: Error fast registering memory for xprt %p\n", xprt);
+ vec->frmr = NULL;
svc_rdma_put_frmr(xprt, frmr);
return -EIO;
}
"svcrdma: could not post a receive buffer, err=%d."
"Closing transport %p.\n", ret, rdma);
set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_rdma_put_frmr(rdma, vec->frmr);
svc_rdma_put_context(ctxt, 0);
return -ENOTCONN;
}
clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags);
/* Prepare the SGE for the RPCRDMA Header */
+ ctxt->sge[0].lkey = rdma->sc_dma_lkey;
+ ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
ctxt->sge[0].addr =
- ib_dma_map_page(rdma->sc_cm_id->device,
- page, 0, PAGE_SIZE, DMA_TO_DEVICE);
+ ib_dma_map_single(rdma->sc_cm_id->device, page_address(page),
+ ctxt->sge[0].length, DMA_TO_DEVICE);
if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr))
goto err;
atomic_inc(&rdma->sc_dma_used);
ctxt->direction = DMA_TO_DEVICE;
- ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
- ctxt->sge[0].lkey = rdma->sc_dma_lkey;
-
/* Determine how many of our SGE are to be transmitted */
for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) {
sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count);
return 0;
err:
+ svc_rdma_unmap_dma(ctxt);
svc_rdma_put_frmr(rdma, vec->frmr);
svc_rdma_put_context(ctxt, 1);
return -EIO;
BUG_ON(sge_no >= xprt->sc_max_sge);
page = svc_rdma_get_page();
ctxt->pages[sge_no] = page;
- pa = ib_dma_map_page(xprt->sc_cm_id->device,
- page, 0, PAGE_SIZE,
+ pa = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page), PAGE_SIZE,
DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa))
goto err_put_ctxt;
svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
if (ret) {
- svc_xprt_put(&xprt->sc_xprt);
+ svc_rdma_unmap_dma(ctxt);
svc_rdma_put_context(ctxt, 1);
+ svc_xprt_put(&xprt->sc_xprt);
}
return ret;
length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va);
/* Prepare SGE for local address */
- sge.addr = ib_dma_map_page(xprt->sc_cm_id->device,
- p, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ sge.addr = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(p), PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) {
put_page(p);
return;
if (ret) {
dprintk("svcrdma: Error %d posting send for protocol error\n",
ret);
- ib_dma_unmap_page(xprt->sc_cm_id->device,
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
sge.addr, PAGE_SIZE,
DMA_FROM_DEVICE);
svc_rdma_put_context(ctxt, 1);
frmr_wr.wr.fast_reg.page_shift = PAGE_SHIFT;
frmr_wr.wr.fast_reg.length = i << PAGE_SHIFT;
frmr_wr.wr.fast_reg.access_flags = (writing ?
- IB_ACCESS_REMOTE_WRITE : IB_ACCESS_REMOTE_READ);
+ IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
+ IB_ACCESS_REMOTE_READ);
frmr_wr.wr.fast_reg.rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey;
DECR_CQCOUNT(&r_xprt->rx_ep);
*
* This is used when all requests are complete; ie, no DRC state remains
* on the server we want to save.
+ *
+ * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with
+ * xs_reset_transport() zeroing the socket from underneath a writer.
*/
static void xs_close(struct rpc_xprt *xprt)
{
xprt_disconnect_done(xprt);
}
+static void xs_tcp_close(struct rpc_xprt *xprt)
+{
+ if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state))
+ xs_close(xprt);
+ else
+ xs_tcp_shutdown(xprt);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
xprt, -status, xprt_connected(xprt),
sock->sk->sk_state);
switch (status) {
+ default:
+ printk("%s: connect returned unhandled error %d\n",
+ __func__, status);
+ case -EADDRNOTAVAIL:
+ /* We're probably in TIME_WAIT. Get rid of existing socket,
+ * and retry
+ */
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ xprt_force_disconnect(xprt);
case -ECONNREFUSED:
case -ECONNRESET:
case -ENETUNREACH:
xprt_clear_connecting(xprt);
return;
}
- /* get rid of existing socket, and retry */
- xs_tcp_shutdown(xprt);
- printk("%s: connect returned unhandled error %d\n",
- __func__, status);
out_eagain:
status = -EAGAIN;
out:
.buf_free = rpc_free,
.send_request = xs_tcp_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
- .close = xs_tcp_shutdown,
+ .close = xs_tcp_close,
.destroy = xs_destroy,
.print_stats = xs_tcp_print_stats,
};
}
result = nla_put(skb, WIMAX_GNL_MSG_DATA, size, msg);
if (result < 0) {
- dev_err(dev, "no memory to add payload in attribute\n");
+ dev_err(dev, "no memory to add payload (msg %p size %zu) in "
+ "attribute: %d\n", msg, size, result);
goto error_nla_put;
}
genlmsg_end(skb, genl_msg);
struct sk_buff *skb;
skb = wimax_msg_alloc(wimax_dev, pipe_name, buf, size, gfp_flags);
- if (skb == NULL)
- goto error_msg_new;
- result = wimax_msg_send(wimax_dev, skb);
-error_msg_new:
+ if (IS_ERR(skb))
+ result = PTR_ERR(skb);
+ else
+ result = wimax_msg_send(wimax_dev, skb);
return result;
}
EXPORT_SYMBOL_GPL(wimax_msg);
*/
void wimax_state_change(struct wimax_dev *wimax_dev, enum wimax_st new_state)
{
+ /*
+ * A driver cannot take the wimax_dev out of the
+ * __WIMAX_ST_NULL state unless by calling wimax_dev_add(). If
+ * the wimax_dev's state is still NULL, we ignore any request
+ * to change its state because it means it hasn't been yet
+ * registered.
+ *
+ * There is no need to complain about it, as routines that
+ * call this might be shared from different code paths that
+ * are called before or after wimax_dev_add() has done its
+ * job.
+ */
mutex_lock(&wimax_dev->mutex);
- __wimax_state_change(wimax_dev, new_state);
+ if (wimax_dev->state > __WIMAX_ST_NULL)
+ __wimax_state_change(wimax_dev, new_state);
mutex_unlock(&wimax_dev->mutex);
return;
}
void wimax_dev_init(struct wimax_dev *wimax_dev)
{
INIT_LIST_HEAD(&wimax_dev->id_table_node);
- __wimax_state_set(wimax_dev, WIMAX_ST_UNINITIALIZED);
+ __wimax_state_set(wimax_dev, __WIMAX_ST_NULL);
mutex_init(&wimax_dev->mutex);
mutex_init(&wimax_dev->mutex_reset);
}
struct rb_node rbn;
unsigned long ts;
struct kref ref;
- bool hold;
+ bool hold, ies_allocated;
/* must be last because of priv member */
struct cfg80211_bss pub;
struct sk_buff *msg;
void *hdr;
- msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!msg)
return;
return;
}
- genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL);
+ genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC);
return;
nla_put_failure:
int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
const struct ieee80211_reg_rule **reg_rule)
{
+ assert_cfg80211_lock();
return freq_reg_info_regd(wiphy, center_freq,
bandwidth, reg_rule, NULL);
}
if (is_world_regdom(cfg80211_regdomain->alpha2) ||
(wiphy->regd && is_world_regdom(wiphy->regd->alpha2)))
return true;
- if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+ if (last_request &&
+ last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
wiphy->custom_regulatory)
return true;
return false;
/* Reap the advantages of previously found beacons */
static void reg_process_beacons(struct wiphy *wiphy)
{
+ /*
+ * Means we are just firing up cfg80211, so no beacons would
+ * have been processed yet.
+ */
+ if (!last_request)
+ return;
if (!reg_is_world_roaming(wiphy))
return;
wiphy_update_beacon_reg(wiphy);
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
+ assert_cfg80211_lock();
+
sband = wiphy->bands[band];
BUG_ON(chan_idx >= sband->n_channels);
chan = &sband->channels[chan_idx];
const struct ieee80211_regdomain *regd)
{
enum ieee80211_band band;
+
+ mutex_lock(&cfg80211_mutex);
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (wiphy->bands[band])
handle_band_custom(wiphy, band, regd);
}
+ mutex_unlock(&cfg80211_mutex);
}
EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
return call_crda(last_request->alpha2);
}
-/* This currently only processes user and driver regulatory hints */
+/* This processes *all* regulatory hints */
static void reg_process_hint(struct regulatory_request *reg_request)
{
int r = 0;
queue_regulatory_request(request);
+ /*
+ * This ensures last_request is populated once modules
+ * come swinging in and calling regulatory hints and
+ * wiphy_apply_custom_regulatory().
+ */
+ flush_scheduled_work();
+
return 0;
}
/* Caller must hold cfg80211_mutex */
void reg_device_remove(struct wiphy *wiphy)
{
- struct wiphy *request_wiphy;
+ struct wiphy *request_wiphy = NULL;
assert_cfg80211_lock();
- request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
+ if (last_request)
+ request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx);
kfree(wiphy->regd);
if (!last_request || !request_wiphy)
bss = container_of(ref, struct cfg80211_internal_bss, ref);
if (bss->pub.free_priv)
bss->pub.free_priv(&bss->pub);
+
+ if (bss->ies_allocated)
+ kfree(bss->pub.information_elements);
+
kfree(bss);
}
found = rb_find_bss(dev, res);
- if (found && overwrite) {
- list_replace(&found->list, &res->list);
- rb_replace_node(&found->rbn, &res->rbn,
- &dev->bss_tree);
- kref_put(&found->ref, bss_release);
- found = res;
- } else if (found) {
+ if (found) {
kref_get(&found->ref);
found->pub.beacon_interval = res->pub.beacon_interval;
found->pub.tsf = res->pub.tsf;
found->pub.signal = res->pub.signal;
found->pub.capability = res->pub.capability;
found->ts = res->ts;
+
+ /* overwrite IEs */
+ if (overwrite) {
+ size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
+ size_t ielen = res->pub.len_information_elements;
+
+ if (ksize(found) >= used + ielen) {
+ memcpy(found->pub.information_elements,
+ res->pub.information_elements, ielen);
+ found->pub.len_information_elements = ielen;
+ } else {
+ u8 *ies = found->pub.information_elements;
+
+ if (found->ies_allocated) {
+ if (ksize(ies) < ielen)
+ ies = krealloc(ies, ielen,
+ GFP_ATOMIC);
+ } else
+ ies = kmalloc(ielen, GFP_ATOMIC);
+
+ if (ies) {
+ memcpy(ies, res->pub.information_elements, ielen);
+ found->ies_allocated = true;
+ found->pub.information_elements = ies;
+ found->pub.len_information_elements = ielen;
+ }
+ }
+ }
+
kref_put(&res->ref, bss_release);
} else {
/* this "consumes" the reference */
err = -EFAULT;
goto out;
}
+
+ if (cmd == SIOCSIWENCODEEXT) {
+ struct iw_encode_ext *ee = (void *) extra;
+
+ if (iwp->length < sizeof(*ee) + ee->key_len)
+ return -EFAULT;
+ }
}
err = handler(dev, info, (union iwreq_data *) iwp, extra);
{
static xfrm_address_t saddr_wildcard = { };
struct net *net = xp_net(pol);
- unsigned int h;
+ unsigned int h, h_wildcard;
struct hlist_node *entry;
struct xfrm_state *x, *x0, *to_put;
int acquire_in_progress = 0;
if (best)
goto found;
- h = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
- hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h, bydst) {
+ h_wildcard = xfrm_dst_hash(net, daddr, &saddr_wildcard, tmpl->reqid, family);
+ hlist_for_each_entry(x, entry, net->xfrm.state_bydst+h_wildcard, bydst) {
if (x->props.family == family &&
x->props.reqid == tmpl->reqid &&
!(x->props.flags & XFRM_STATE_WILDRECV) &&
#
# Generated files
#
-ihex2fw
conmakehash
kallsyms
pnmtologo
# scripts contains sources for various helper programs used throughout
# the kernel for the build process.
# ---------------------------------------------------------------------------
-# ihex2fw: Parser/loader for IHEX formatted data
# kallsyms: Find all symbols in vmlinux
# pnmttologo: Convert pnm files to logo files
+# conmakehash: Create chartable
# conmakehash: Create arrays for initializing the kernel console tables
-hostprogs-y := ihex2fw
hostprogs-$(CONFIG_KALLSYMS) += kallsyms
hostprogs-$(CONFIG_LOGO) += pnmtologo
hostprogs-$(CONFIG_VT) += conmakehash
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
+subdir-$(CONFIG_DTC) += dtc
# Let clean descend into subdirs
subdir- += basic kconfig package selinux
cppflags-y :=
ldflags-y :=
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
# Read auto.conf if it exists, otherwise ignore
-include include/config/auto.conf
kbuild-file := $(srctree)/$(obj)/Kbuild
include $(kbuild-file)
+_dst := $(if $(destination-y),$(destination-y),$(_dst))
+
include scripts/Kbuild.include
install := $(INSTALL_HDR_PATH)/$(_dst)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
# Figure out what we need to build from the various variables
# ===========================================================================
debug_flags =
endif
-orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
+orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
-_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
+_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
$(asflags-y) $(AFLAGS_$(basetarget).o)
_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
# ---------------------------------------------------------------------------
quiet_cmd_gzip = GZIP $@
-cmd_gzip = gzip -f -9 < $< > $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \
+ (rm -f $@ ; false)
# Bzip2
# ---------------------------------------------------------------------------
-# Bzip2 does not include size in file... so we have to fake that
-size_append=$(CONFIG_SHELL) $(srctree)/scripts/bin_size
-
-quiet_cmd_bzip2 = BZIP2 $@
-cmd_bzip2 = (bzip2 -9 < $< && $(size_append) $<) > $@ || (rm -f $@ ; false)
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = echo -ne $(shell \
+dec_size=0; \
+for F in $1; do \
+ fsize=$$(stat -c "%s" $$F); \
+ dec_size=$$(expr $$dec_size + $$fsize); \
+done; \
+printf "%08x" $$dec_size | \
+ sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
+)
+
+quiet_cmd_bzip2 = BZIP2 $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+ bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
-cmd_lzma = (lzma -9 -c $< && $(size_append) $<) >$@ || (rm -f $@ ; false)
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+++ /dev/null
-#!/bin/sh
-
-if [ $# = 0 ] ; then
- echo Usage: $0 file
-fi
-
-size_dec=`stat -c "%s" $1`
-size_hex_echo_string=`printf "%08x" $size_dec |
- sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'`
-/bin/echo -ne $size_hex_echo_string
--- /dev/null
+# scripts/dtc makefile
+
+hostprogs-y := dtc
+always := $(hostprogs-y)
+
+dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
+ srcpos.o checks.o
+dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
+
+# Source files need to get at the userspace version of libfdt_env.h to compile
+
+HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt
+
+HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+
+HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
+
+# dependencies on generated files need to be listed explicitly
+$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h
+$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h
+
+targets += dtc-parser.tab.c dtc-lexer.lex.c
+
+clean-files += dtc-parser.tab.h
+
+# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output
+
+ifdef GENERATE_PARSER
+
+BISON = bison
+FLEX = flex
+
+quiet_cmd_bison = BISON $@
+ cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
+quiet_cmd_flex = FLEX $@
+ cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
+
+$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE
+ $(call if_changed,bison)
+
+$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c
+
+$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE
+ $(call if_changed,flex)
+
+endif
--- /dev/null
+# Makefile.dtc
+#
+# This is not a complete Makefile of itself. Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+DTC_SRCS = dtc.c flattree.c fstree.c data.c livetree.c treesource.c srcpos.c \
+ checks.c
+DTC_GEN_SRCS = dtc-lexer.lex.c dtc-parser.tab.c
+DTC_OBJS = $(DTC_SRCS:%.c=%.o) $(DTC_GEN_SRCS:%.c=%.o)
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2007.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+#ifdef TRACE_CHECKS
+#define TRACE(c, ...) \
+ do { \
+ fprintf(stderr, "=== %s: ", (c)->name); \
+ fprintf(stderr, __VA_ARGS__); \
+ fprintf(stderr, "\n"); \
+ } while (0)
+#else
+#define TRACE(c, fmt, ...) do { } while (0)
+#endif
+
+enum checklevel {
+ IGNORE = 0,
+ WARN = 1,
+ ERROR = 2,
+};
+
+enum checkstatus {
+ UNCHECKED = 0,
+ PREREQ,
+ PASSED,
+ FAILED,
+};
+
+struct check;
+
+typedef void (*tree_check_fn)(struct check *c, struct node *dt);
+typedef void (*node_check_fn)(struct check *c, struct node *dt, struct node *node);
+typedef void (*prop_check_fn)(struct check *c, struct node *dt,
+ struct node *node, struct property *prop);
+
+struct check {
+ const char *name;
+ tree_check_fn tree_fn;
+ node_check_fn node_fn;
+ prop_check_fn prop_fn;
+ void *data;
+ enum checklevel level;
+ enum checkstatus status;
+ int inprogress;
+ int num_prereqs;
+ struct check **prereq;
+};
+
+#define CHECK(nm, tfn, nfn, pfn, d, lvl, ...) \
+ static struct check *nm##_prereqs[] = { __VA_ARGS__ }; \
+ static struct check nm = { \
+ .name = #nm, \
+ .tree_fn = (tfn), \
+ .node_fn = (nfn), \
+ .prop_fn = (pfn), \
+ .data = (d), \
+ .level = (lvl), \
+ .status = UNCHECKED, \
+ .num_prereqs = ARRAY_SIZE(nm##_prereqs), \
+ .prereq = nm##_prereqs, \
+ };
+
+#define TREE_CHECK(nm, d, lvl, ...) \
+ CHECK(nm, check_##nm, NULL, NULL, d, lvl, __VA_ARGS__)
+#define NODE_CHECK(nm, d, lvl, ...) \
+ CHECK(nm, NULL, check_##nm, NULL, d, lvl, __VA_ARGS__)
+#define PROP_CHECK(nm, d, lvl, ...) \
+ CHECK(nm, NULL, NULL, check_##nm, d, lvl, __VA_ARGS__)
+#define BATCH_CHECK(nm, lvl, ...) \
+ CHECK(nm, NULL, NULL, NULL, NULL, lvl, __VA_ARGS__)
+
+#ifdef __GNUC__
+static inline void check_msg(struct check *c, const char *fmt, ...) __attribute__((format (printf, 2, 3)));
+#endif
+static inline void check_msg(struct check *c, const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+
+ if ((c->level < WARN) || (c->level <= quiet))
+ return; /* Suppress message */
+
+ fprintf(stderr, "%s (%s): ",
+ (c->level == ERROR) ? "ERROR" : "Warning", c->name);
+ vfprintf(stderr, fmt, ap);
+ fprintf(stderr, "\n");
+}
+
+#define FAIL(c, ...) \
+ do { \
+ TRACE((c), "\t\tFAILED at %s:%d", __FILE__, __LINE__); \
+ (c)->status = FAILED; \
+ check_msg((c), __VA_ARGS__); \
+ } while (0)
+
+static void check_nodes_props(struct check *c, struct node *dt, struct node *node)
+{
+ struct node *child;
+ struct property *prop;
+
+ TRACE(c, "%s", node->fullpath);
+ if (c->node_fn)
+ c->node_fn(c, dt, node);
+
+ if (c->prop_fn)
+ for_each_property(node, prop) {
+ TRACE(c, "%s\t'%s'", node->fullpath, prop->name);
+ c->prop_fn(c, dt, node, prop);
+ }
+
+ for_each_child(node, child)
+ check_nodes_props(c, dt, child);
+}
+
+static int run_check(struct check *c, struct node *dt)
+{
+ int error = 0;
+ int i;
+
+ assert(!c->inprogress);
+
+ if (c->status != UNCHECKED)
+ goto out;
+
+ c->inprogress = 1;
+
+ for (i = 0; i < c->num_prereqs; i++) {
+ struct check *prq = c->prereq[i];
+ error |= run_check(prq, dt);
+ if (prq->status != PASSED) {
+ c->status = PREREQ;
+ check_msg(c, "Failed prerequisite '%s'",
+ c->prereq[i]->name);
+ }
+ }
+
+ if (c->status != UNCHECKED)
+ goto out;
+
+ if (c->node_fn || c->prop_fn)
+ check_nodes_props(c, dt, dt);
+
+ if (c->tree_fn)
+ c->tree_fn(c, dt);
+ if (c->status == UNCHECKED)
+ c->status = PASSED;
+
+ TRACE(c, "\tCompleted, status %d", c->status);
+
+out:
+ c->inprogress = 0;
+ if ((c->status != PASSED) && (c->level == ERROR))
+ error = 1;
+ return error;
+}
+
+/*
+ * Utility check functions
+ */
+
+static void check_is_string(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property *prop;
+ char *propname = c->data;
+
+ prop = get_property(node, propname);
+ if (!prop)
+ return; /* Not present, assumed ok */
+
+ if (!data_is_one_string(prop->val))
+ FAIL(c, "\"%s\" property in %s is not a string",
+ propname, node->fullpath);
+}
+#define CHECK_IS_STRING(nm, propname, lvl) \
+ CHECK(nm, NULL, check_is_string, NULL, (propname), (lvl))
+
+static void check_is_cell(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property *prop;
+ char *propname = c->data;
+
+ prop = get_property(node, propname);
+ if (!prop)
+ return; /* Not present, assumed ok */
+
+ if (prop->val.len != sizeof(cell_t))
+ FAIL(c, "\"%s\" property in %s is not a single cell",
+ propname, node->fullpath);
+}
+#define CHECK_IS_CELL(nm, propname, lvl) \
+ CHECK(nm, NULL, check_is_cell, NULL, (propname), (lvl))
+
+/*
+ * Structural check functions
+ */
+
+static void check_duplicate_node_names(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct node *child, *child2;
+
+ for_each_child(node, child)
+ for (child2 = child->next_sibling;
+ child2;
+ child2 = child2->next_sibling)
+ if (streq(child->name, child2->name))
+ FAIL(c, "Duplicate node name %s",
+ child->fullpath);
+}
+NODE_CHECK(duplicate_node_names, NULL, ERROR);
+
+static void check_duplicate_property_names(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop, *prop2;
+
+ for_each_property(node, prop)
+ for (prop2 = prop->next; prop2; prop2 = prop2->next)
+ if (streq(prop->name, prop2->name))
+ FAIL(c, "Duplicate property name %s in %s",
+ prop->name, node->fullpath);
+}
+NODE_CHECK(duplicate_property_names, NULL, ERROR);
+
+#define LOWERCASE "abcdefghijklmnopqrstuvwxyz"
+#define UPPERCASE "ABCDEFGHIJKLMNOPQRSTUVWXYZ"
+#define DIGITS "0123456789"
+#define PROPNODECHARS LOWERCASE UPPERCASE DIGITS ",._+*#?-"
+
+static void check_node_name_chars(struct check *c, struct node *dt,
+ struct node *node)
+{
+ int n = strspn(node->name, c->data);
+
+ if (n < strlen(node->name))
+ FAIL(c, "Bad character '%c' in node %s",
+ node->name[n], node->fullpath);
+}
+NODE_CHECK(node_name_chars, PROPNODECHARS "@", ERROR);
+
+static void check_node_name_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ if (strchr(get_unitname(node), '@'))
+ FAIL(c, "Node %s has multiple '@' characters in name",
+ node->fullpath);
+}
+NODE_CHECK(node_name_format, NULL, ERROR, &node_name_chars);
+
+static void check_property_name_chars(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ int n = strspn(prop->name, c->data);
+
+ if (n < strlen(prop->name))
+ FAIL(c, "Bad character '%c' in property name \"%s\", node %s",
+ prop->name[n], prop->name, node->fullpath);
+}
+PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
+
+static void check_explicit_phandles(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property *prop;
+ struct node *other;
+ cell_t phandle;
+
+ prop = get_property(node, "linux,phandle");
+ if (! prop)
+ return; /* No phandle, that's fine */
+
+ if (prop->val.len != sizeof(cell_t)) {
+ FAIL(c, "%s has bad length (%d) linux,phandle property",
+ node->fullpath, prop->val.len);
+ return;
+ }
+
+ phandle = propval_cell(prop);
+ if ((phandle == 0) || (phandle == -1)) {
+ FAIL(c, "%s has invalid linux,phandle value 0x%x",
+ node->fullpath, phandle);
+ return;
+ }
+
+ other = get_node_by_phandle(root, phandle);
+ if (other) {
+ FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
+ node->fullpath, phandle, other->fullpath);
+ return;
+ }
+
+ node->phandle = phandle;
+}
+NODE_CHECK(explicit_phandles, NULL, ERROR);
+
+static void check_name_properties(struct check *c, struct node *root,
+ struct node *node)
+{
+ struct property **pp, *prop = NULL;
+
+ for (pp = &node->proplist; *pp; pp = &((*pp)->next))
+ if (streq((*pp)->name, "name")) {
+ prop = *pp;
+ break;
+ }
+
+ if (!prop)
+ return; /* No name property, that's fine */
+
+ if ((prop->val.len != node->basenamelen+1)
+ || (memcmp(prop->val.val, node->name, node->basenamelen) != 0)) {
+ FAIL(c, "\"name\" property in %s is incorrect (\"%s\" instead"
+ " of base node name)", node->fullpath, prop->val.val);
+ } else {
+ /* The name property is correct, and therefore redundant.
+ * Delete it */
+ *pp = prop->next;
+ free(prop->name);
+ data_free(prop->val);
+ free(prop);
+ }
+}
+CHECK_IS_STRING(name_is_string, "name", ERROR);
+NODE_CHECK(name_properties, NULL, ERROR, &name_is_string);
+
+/*
+ * Reference fixup functions
+ */
+
+static void fixup_phandle_references(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ struct marker *m = prop->val.markers;
+ struct node *refnode;
+ cell_t phandle;
+
+ for_each_marker_of_type(m, REF_PHANDLE) {
+ assert(m->offset + sizeof(cell_t) <= prop->val.len);
+
+ refnode = get_node_by_ref(dt, m->ref);
+ if (! refnode) {
+ FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+ m->ref);
+ continue;
+ }
+
+ phandle = get_node_phandle(dt, refnode);
+ *((cell_t *)(prop->val.val + m->offset)) = cpu_to_fdt32(phandle);
+ }
+}
+CHECK(phandle_references, NULL, NULL, fixup_phandle_references, NULL, ERROR,
+ &duplicate_node_names, &explicit_phandles);
+
+static void fixup_path_references(struct check *c, struct node *dt,
+ struct node *node, struct property *prop)
+{
+ struct marker *m = prop->val.markers;
+ struct node *refnode;
+ char *path;
+
+ for_each_marker_of_type(m, REF_PATH) {
+ assert(m->offset <= prop->val.len);
+
+ refnode = get_node_by_ref(dt, m->ref);
+ if (!refnode) {
+ FAIL(c, "Reference to non-existent node or label \"%s\"\n",
+ m->ref);
+ continue;
+ }
+
+ path = refnode->fullpath;
+ prop->val = data_insert_at_marker(prop->val, m, path,
+ strlen(path) + 1);
+ }
+}
+CHECK(path_references, NULL, NULL, fixup_path_references, NULL, ERROR,
+ &duplicate_node_names);
+
+/*
+ * Semantic checks
+ */
+CHECK_IS_CELL(address_cells_is_cell, "#address-cells", WARN);
+CHECK_IS_CELL(size_cells_is_cell, "#size-cells", WARN);
+CHECK_IS_CELL(interrupt_cells_is_cell, "#interrupt-cells", WARN);
+
+CHECK_IS_STRING(device_type_is_string, "device_type", WARN);
+CHECK_IS_STRING(model_is_string, "model", WARN);
+CHECK_IS_STRING(status_is_string, "status", WARN);
+
+static void fixup_addr_size_cells(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop;
+
+ node->addr_cells = -1;
+ node->size_cells = -1;
+
+ prop = get_property(node, "#address-cells");
+ if (prop)
+ node->addr_cells = propval_cell(prop);
+
+ prop = get_property(node, "#size-cells");
+ if (prop)
+ node->size_cells = propval_cell(prop);
+}
+CHECK(addr_size_cells, NULL, fixup_addr_size_cells, NULL, NULL, WARN,
+ &address_cells_is_cell, &size_cells_is_cell);
+
+#define node_addr_cells(n) \
+ (((n)->addr_cells == -1) ? 2 : (n)->addr_cells)
+#define node_size_cells(n) \
+ (((n)->size_cells == -1) ? 1 : (n)->size_cells)
+
+static void check_reg_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop;
+ int addr_cells, size_cells, entrylen;
+
+ prop = get_property(node, "reg");
+ if (!prop)
+ return; /* No "reg", that's fine */
+
+ if (!node->parent) {
+ FAIL(c, "Root node has a \"reg\" property");
+ return;
+ }
+
+ if (prop->val.len == 0)
+ FAIL(c, "\"reg\" property in %s is empty", node->fullpath);
+
+ addr_cells = node_addr_cells(node->parent);
+ size_cells = node_size_cells(node->parent);
+ entrylen = (addr_cells + size_cells) * sizeof(cell_t);
+
+ if ((prop->val.len % entrylen) != 0)
+ FAIL(c, "\"reg\" property in %s has invalid length (%d bytes) "
+ "(#address-cells == %d, #size-cells == %d)",
+ node->fullpath, prop->val.len, addr_cells, size_cells);
+}
+NODE_CHECK(reg_format, NULL, WARN, &addr_size_cells);
+
+static void check_ranges_format(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *prop;
+ int c_addr_cells, p_addr_cells, c_size_cells, p_size_cells, entrylen;
+
+ prop = get_property(node, "ranges");
+ if (!prop)
+ return;
+
+ if (!node->parent) {
+ FAIL(c, "Root node has a \"ranges\" property");
+ return;
+ }
+
+ p_addr_cells = node_addr_cells(node->parent);
+ p_size_cells = node_size_cells(node->parent);
+ c_addr_cells = node_addr_cells(node);
+ c_size_cells = node_size_cells(node);
+ entrylen = (p_addr_cells + c_addr_cells + c_size_cells) * sizeof(cell_t);
+
+ if (prop->val.len == 0) {
+ if (p_addr_cells != c_addr_cells)
+ FAIL(c, "%s has empty \"ranges\" property but its "
+ "#address-cells (%d) differs from %s (%d)",
+ node->fullpath, c_addr_cells, node->parent->fullpath,
+ p_addr_cells);
+ if (p_size_cells != c_size_cells)
+ FAIL(c, "%s has empty \"ranges\" property but its "
+ "#size-cells (%d) differs from %s (%d)",
+ node->fullpath, c_size_cells, node->parent->fullpath,
+ p_size_cells);
+ } else if ((prop->val.len % entrylen) != 0) {
+ FAIL(c, "\"ranges\" property in %s has invalid length (%d bytes) "
+ "(parent #address-cells == %d, child #address-cells == %d, "
+ "#size-cells == %d)", node->fullpath, prop->val.len,
+ p_addr_cells, c_addr_cells, c_size_cells);
+ }
+}
+NODE_CHECK(ranges_format, NULL, WARN, &addr_size_cells);
+
+/*
+ * Style checks
+ */
+static void check_avoid_default_addr_size(struct check *c, struct node *dt,
+ struct node *node)
+{
+ struct property *reg, *ranges;
+
+ if (!node->parent)
+ return; /* Ignore root node */
+
+ reg = get_property(node, "reg");
+ ranges = get_property(node, "ranges");
+
+ if (!reg && !ranges)
+ return;
+
+ if ((node->parent->addr_cells == -1))
+ FAIL(c, "Relying on default #address-cells value for %s",
+ node->fullpath);
+
+ if ((node->parent->size_cells == -1))
+ FAIL(c, "Relying on default #size-cells value for %s",
+ node->fullpath);
+}
+NODE_CHECK(avoid_default_addr_size, NULL, WARN, &addr_size_cells);
+
+static void check_obsolete_chosen_interrupt_controller(struct check *c,
+ struct node *dt)
+{
+ struct node *chosen;
+ struct property *prop;
+
+ chosen = get_node_by_path(dt, "/chosen");
+ if (!chosen)
+ return;
+
+ prop = get_property(chosen, "interrupt-controller");
+ if (prop)
+ FAIL(c, "/chosen has obsolete \"interrupt-controller\" "
+ "property");
+}
+TREE_CHECK(obsolete_chosen_interrupt_controller, NULL, WARN);
+
+static struct check *check_table[] = {
+ &duplicate_node_names, &duplicate_property_names,
+ &node_name_chars, &node_name_format, &property_name_chars,
+ &name_is_string, &name_properties,
+ &explicit_phandles,
+ &phandle_references, &path_references,
+
+ &address_cells_is_cell, &size_cells_is_cell, &interrupt_cells_is_cell,
+ &device_type_is_string, &model_is_string, &status_is_string,
+
+ &addr_size_cells, ®_format, &ranges_format,
+
+ &avoid_default_addr_size,
+ &obsolete_chosen_interrupt_controller,
+};
+
+void process_checks(int force, struct boot_info *bi)
+{
+ struct node *dt = bi->dt;
+ int i;
+ int error = 0;
+
+ for (i = 0; i < ARRAY_SIZE(check_table); i++) {
+ struct check *c = check_table[i];
+
+ if (c->level != IGNORE)
+ error = error || run_check(c, dt);
+ }
+
+ if (error) {
+ if (!force) {
+ fprintf(stderr, "ERROR: Input tree has errors, aborting "
+ "(use -f to force output)\n");
+ exit(2);
+ } else if (quiet < 3) {
+ fprintf(stderr, "Warning: Input tree has errors, "
+ "output forced\n");
+ }
+ }
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+void data_free(struct data d)
+{
+ struct marker *m, *nm;
+
+ m = d.markers;
+ while (m) {
+ nm = m->next;
+ free(m->ref);
+ free(m);
+ m = nm;
+ }
+
+ if (d.val)
+ free(d.val);
+}
+
+struct data data_grow_for(struct data d, int xlen)
+{
+ struct data nd;
+ int newsize;
+
+ if (xlen == 0)
+ return d;
+
+ nd = d;
+
+ newsize = xlen;
+
+ while ((d.len + xlen) > newsize)
+ newsize *= 2;
+
+ nd.val = xrealloc(d.val, newsize);
+
+ return nd;
+}
+
+struct data data_copy_mem(const char *mem, int len)
+{
+ struct data d;
+
+ d = data_grow_for(empty_data, len);
+
+ d.len = len;
+ memcpy(d.val, mem, len);
+
+ return d;
+}
+
+static char get_oct_char(const char *s, int *i)
+{
+ char x[4];
+ char *endx;
+ long val;
+
+ x[3] = '\0';
+ strncpy(x, s + *i, 3);
+
+ val = strtol(x, &endx, 8);
+
+ assert(endx > x);
+
+ (*i) += endx - x;
+ return val;
+}
+
+static char get_hex_char(const char *s, int *i)
+{
+ char x[3];
+ char *endx;
+ long val;
+
+ x[2] = '\0';
+ strncpy(x, s + *i, 2);
+
+ val = strtol(x, &endx, 16);
+ if (!(endx > x))
+ die("\\x used with no following hex digits\n");
+
+ (*i) += endx - x;
+ return val;
+}
+
+struct data data_copy_escape_string(const char *s, int len)
+{
+ int i = 0;
+ struct data d;
+ char *q;
+
+ d = data_grow_for(empty_data, strlen(s)+1);
+
+ q = d.val;
+ while (i < len) {
+ char c = s[i++];
+
+ if (c != '\\') {
+ q[d.len++] = c;
+ continue;
+ }
+
+ c = s[i++];
+ assert(c);
+ switch (c) {
+ case 'a':
+ q[d.len++] = '\a';
+ break;
+ case 'b':
+ q[d.len++] = '\b';
+ break;
+ case 't':
+ q[d.len++] = '\t';
+ break;
+ case 'n':
+ q[d.len++] = '\n';
+ break;
+ case 'v':
+ q[d.len++] = '\v';
+ break;
+ case 'f':
+ q[d.len++] = '\f';
+ break;
+ case 'r':
+ q[d.len++] = '\r';
+ break;
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ i--; /* need to re-read the first digit as
+ * part of the octal value */
+ q[d.len++] = get_oct_char(s, &i);
+ break;
+ case 'x':
+ q[d.len++] = get_hex_char(s, &i);
+ break;
+ default:
+ q[d.len++] = c;
+ }
+ }
+
+ q[d.len++] = '\0';
+ return d;
+}
+
+struct data data_copy_file(FILE *f, size_t maxlen)
+{
+ struct data d = empty_data;
+
+ while (!feof(f) && (d.len < maxlen)) {
+ size_t chunksize, ret;
+
+ if (maxlen == -1)
+ chunksize = 4096;
+ else
+ chunksize = maxlen - d.len;
+
+ d = data_grow_for(d, chunksize);
+ ret = fread(d.val + d.len, 1, chunksize, f);
+
+ if (ferror(f))
+ die("Error reading file into data: %s", strerror(errno));
+
+ if (d.len + ret < d.len)
+ die("Overflow reading file into data\n");
+
+ d.len += ret;
+ }
+
+ return d;
+}
+
+struct data data_append_data(struct data d, const void *p, int len)
+{
+ d = data_grow_for(d, len);
+ memcpy(d.val + d.len, p, len);
+ d.len += len;
+ return d;
+}
+
+struct data data_insert_at_marker(struct data d, struct marker *m,
+ const void *p, int len)
+{
+ d = data_grow_for(d, len);
+ memmove(d.val + m->offset + len, d.val + m->offset, d.len - m->offset);
+ memcpy(d.val + m->offset, p, len);
+ d.len += len;
+
+ /* Adjust all markers after the one we're inserting at */
+ m = m->next;
+ for_each_marker(m)
+ m->offset += len;
+ return d;
+}
+
+struct data data_append_markers(struct data d, struct marker *m)
+{
+ struct marker **mp = &d.markers;
+
+ /* Find the end of the markerlist */
+ while (*mp)
+ mp = &((*mp)->next);
+ *mp = m;
+ return d;
+}
+
+struct data data_merge(struct data d1, struct data d2)
+{
+ struct data d;
+ struct marker *m2 = d2.markers;
+
+ d = data_append_markers(data_append_data(d1, d2.val, d2.len), m2);
+
+ /* Adjust for the length of d1 */
+ for_each_marker(m2)
+ m2->offset += d1.len;
+
+ d2.markers = NULL; /* So data_free() doesn't clobber them */
+ data_free(d2);
+
+ return d;
+}
+
+struct data data_append_cell(struct data d, cell_t word)
+{
+ cell_t beword = cpu_to_fdt32(word);
+
+ return data_append_data(d, &beword, sizeof(beword));
+}
+
+struct data data_append_re(struct data d, const struct fdt_reserve_entry *re)
+{
+ struct fdt_reserve_entry bere;
+
+ bere.address = cpu_to_fdt64(re->address);
+ bere.size = cpu_to_fdt64(re->size);
+
+ return data_append_data(d, &bere, sizeof(bere));
+}
+
+struct data data_append_addr(struct data d, uint64_t addr)
+{
+ uint64_t beaddr = cpu_to_fdt64(addr);
+
+ return data_append_data(d, &beaddr, sizeof(beaddr));
+}
+
+struct data data_append_byte(struct data d, uint8_t byte)
+{
+ return data_append_data(d, &byte, 1);
+}
+
+struct data data_append_zeroes(struct data d, int len)
+{
+ d = data_grow_for(d, len);
+
+ memset(d.val + d.len, 0, len);
+ d.len += len;
+ return d;
+}
+
+struct data data_append_align(struct data d, int align)
+{
+ int newlen = ALIGN(d.len, align);
+ return data_append_zeroes(d, newlen - d.len);
+}
+
+struct data data_add_marker(struct data d, enum markertype type, char *ref)
+{
+ struct marker *m;
+
+ m = xmalloc(sizeof(*m));
+ m->offset = d.len;
+ m->type = type;
+ m->ref = ref;
+ m->next = NULL;
+
+ return data_append_markers(d, m);
+}
+
+int data_is_one_string(struct data d)
+{
+ int i;
+ int len = d.len;
+
+ if (len == 0)
+ return 0;
+
+ for (i = 0; i < len-1; i++)
+ if (d.val[i] == '\0')
+ return 0;
+
+ if (d.val[len-1] != '\0')
+ return 0;
+
+ return 1;
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+%option noyywrap nounput yylineno
+
+%x INCLUDE
+%x BYTESTRING
+%x PROPNODENAME
+%s V1
+
+PROPNODECHAR [a-zA-Z0-9,._+*#?@-]
+PATHCHAR ({PROPNODECHAR}|[/])
+LABEL [a-zA-Z_][a-zA-Z0-9_]*
+STRING \"([^\\"]|\\.)*\"
+WS [[:space:]]
+COMMENT "/*"([^*]|\*+[^*/])*\*+"/"
+LINECOMMENT "//".*\n
+
+%{
+#include "dtc.h"
+#include "srcpos.h"
+#include "dtc-parser.tab.h"
+
+
+/*#define LEXDEBUG 1*/
+
+#ifdef LEXDEBUG
+#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
+#else
+#define DPRINT(fmt, ...) do { } while (0)
+#endif
+
+static int dts_version; /* = 0 */
+
+#define BEGIN_DEFAULT() if (dts_version == 0) { \
+ DPRINT("<INITIAL>\n"); \
+ BEGIN(INITIAL); \
+ } else { \
+ DPRINT("<V1>\n"); \
+ BEGIN(V1); \
+ }
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
+%}
+
+%%
+<*>"/include/"{WS}*{STRING} {
+ char *name = strchr(yytext, '\"') + 1;
+ yytext[yyleng-1] = '\0';
+ push_input_file(name);
+ }
+
+<*><<EOF>> {
+ if (!pop_input_file()) {
+ yyterminate();
+ }
+ }
+
+<*>{STRING} {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("String: %s\n", yytext);
+ yylval.data = data_copy_escape_string(yytext+1,
+ yyleng-2);
+ yylloc.first_line = yylineno;
+ return DT_STRING;
+ }
+
+<*>"/dts-v1/" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /dts-v1/\n");
+ dts_version = 1;
+ BEGIN_DEFAULT();
+ return DT_V1;
+ }
+
+<*>"/memreserve/" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /memreserve/\n");
+ BEGIN_DEFAULT();
+ return DT_MEMRESERVE;
+ }
+
+<*>{LABEL}: {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Label: %s\n", yytext);
+ yylval.labelref = strdup(yytext);
+ yylval.labelref[yyleng-1] = '\0';
+ return DT_LABEL;
+ }
+
+<INITIAL>[bodh]# {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ if (*yytext == 'b')
+ yylval.cbase = 2;
+ else if (*yytext == 'o')
+ yylval.cbase = 8;
+ else if (*yytext == 'd')
+ yylval.cbase = 10;
+ else
+ yylval.cbase = 16;
+ DPRINT("Base: %d\n", yylval.cbase);
+ return DT_BASE;
+ }
+
+<INITIAL>[0-9a-fA-F]+ {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LEGACYLITERAL;
+ }
+
+<V1>[0-9]+|0[xX][0-9a-fA-F]+ {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LITERAL;
+ }
+
+\&{LABEL} { /* label reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+
+"&{/"{PATHCHAR}+\} { /* new-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yytext[yyleng-1] = '\0';
+ DPRINT("Ref: %s\n", yytext+2);
+ yylval.labelref = strdup(yytext+2);
+ return DT_REF;
+ }
+
+<INITIAL>"&/"{PATHCHAR}+ { /* old-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+
+<BYTESTRING>[0-9a-fA-F]{2} {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.byte = strtol(yytext, NULL, 16);
+ DPRINT("Byte: %02x\n", (int)yylval.byte);
+ return DT_BYTE;
+ }
+
+<BYTESTRING>"]" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("/BYTESTRING\n");
+ BEGIN_DEFAULT();
+ return ']';
+ }
+
+<PROPNODENAME>{PROPNODECHAR}+ {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("PropNodeName: %s\n", yytext);
+ yylval.propnodename = strdup(yytext);
+ BEGIN_DEFAULT();
+ return DT_PROPNODENAME;
+ }
+
+"/incbin/" {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Binary Include\n");
+ return DT_INCBIN;
+ }
+
+<*>{WS}+ /* eat whitespace */
+<*>{COMMENT}+ /* eat C-style comments */
+<*>{LINECOMMENT}+ /* eat C++-style comments */
+
+<*>. {
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Char: %c (\\x%02x)\n", yytext[0],
+ (unsigned)yytext[0]);
+ if (yytext[0] == '[') {
+ DPRINT("<BYTESTRING>\n");
+ BEGIN(BYTESTRING);
+ }
+ if ((yytext[0] == '{')
+ || (yytext[0] == ';')) {
+ DPRINT("<PROPNODENAME>\n");
+ BEGIN(PROPNODENAME);
+ }
+ return yytext[0];
+ }
+
+%%
+
+
+/*
+ * Stack of nested include file contexts.
+ */
+
+struct incl_file {
+ struct dtc_file *file;
+ YY_BUFFER_STATE yy_prev_buf;
+ int yy_prev_lineno;
+ struct incl_file *prev;
+};
+
+static struct incl_file *incl_file_stack;
+
+
+/*
+ * Detect infinite include recursion.
+ */
+#define MAX_INCLUDE_DEPTH (100)
+
+static int incl_depth = 0;
+
+
+static void push_input_file(const char *filename)
+{
+ struct incl_file *incl_file;
+ struct dtc_file *newfile;
+ struct search_path search, *searchptr = NULL;
+
+ assert(filename);
+
+ if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+ die("Includes nested too deeply");
+
+ if (srcpos_file) {
+ search.dir = srcpos_file->dir;
+ search.next = NULL;
+ search.prev = NULL;
+ searchptr = &search;
+ }
+
+ newfile = dtc_open_file(filename, searchptr);
+
+ incl_file = xmalloc(sizeof(struct incl_file));
+
+ /*
+ * Save current context.
+ */
+ incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
+ incl_file->yy_prev_lineno = yylineno;
+ incl_file->file = srcpos_file;
+ incl_file->prev = incl_file_stack;
+
+ incl_file_stack = incl_file;
+
+ /*
+ * Establish new context.
+ */
+ srcpos_file = newfile;
+ yylineno = 1;
+ yyin = newfile->file;
+ yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
+}
+
+
+static int pop_input_file(void)
+{
+ struct incl_file *incl_file;
+
+ if (incl_file_stack == 0)
+ return 0;
+
+ dtc_close_file(srcpos_file);
+
+ /*
+ * Pop.
+ */
+ --incl_depth;
+ incl_file = incl_file_stack;
+ incl_file_stack = incl_file->prev;
+
+ /*
+ * Recover old context.
+ */
+ yy_delete_buffer(YY_CURRENT_BUFFER);
+ yy_switch_to_buffer(incl_file->yy_prev_buf);
+ yylineno = incl_file->yy_prev_lineno;
+ srcpos_file = incl_file->file;
+ yyin = incl_file->file ? incl_file->file->file : NULL;
+
+ /*
+ * Free old state.
+ */
+ free(incl_file);
+
+ return 1;
+}
--- /dev/null
+#line 2 "dtc-lexer.lex.c"
+
+#line 4 "dtc-lexer.lex.c"
+
+#define YY_INT_ALIGNED short int
+
+/* A lexical scanner generated by flex */
+
+#define FLEX_SCANNER
+#define YY_FLEX_MAJOR_VERSION 2
+#define YY_FLEX_MINOR_VERSION 5
+#define YY_FLEX_SUBMINOR_VERSION 34
+#if YY_FLEX_SUBMINOR_VERSION > 0
+#define FLEX_BETA
+#endif
+
+/* First, we deal with platform-specific or compiler-specific issues. */
+
+/* begin standard C headers. */
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <stdlib.h>
+
+/* end standard C headers. */
+
+/* flex integer type definitions */
+
+#ifndef FLEXINT_H
+#define FLEXINT_H
+
+/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
+
+#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
+
+/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
+ * if you want the limit (max/min) macros for int types.
+ */
+#ifndef __STDC_LIMIT_MACROS
+#define __STDC_LIMIT_MACROS 1
+#endif
+
+#include <inttypes.h>
+typedef int8_t flex_int8_t;
+typedef uint8_t flex_uint8_t;
+typedef int16_t flex_int16_t;
+typedef uint16_t flex_uint16_t;
+typedef int32_t flex_int32_t;
+typedef uint32_t flex_uint32_t;
+#else
+typedef signed char flex_int8_t;
+typedef short int flex_int16_t;
+typedef int flex_int32_t;
+typedef unsigned char flex_uint8_t;
+typedef unsigned short int flex_uint16_t;
+typedef unsigned int flex_uint32_t;
+#endif /* ! C99 */
+
+/* Limits of integral types. */
+#ifndef INT8_MIN
+#define INT8_MIN (-128)
+#endif
+#ifndef INT16_MIN
+#define INT16_MIN (-32767-1)
+#endif
+#ifndef INT32_MIN
+#define INT32_MIN (-2147483647-1)
+#endif
+#ifndef INT8_MAX
+#define INT8_MAX (127)
+#endif
+#ifndef INT16_MAX
+#define INT16_MAX (32767)
+#endif
+#ifndef INT32_MAX
+#define INT32_MAX (2147483647)
+#endif
+#ifndef UINT8_MAX
+#define UINT8_MAX (255U)
+#endif
+#ifndef UINT16_MAX
+#define UINT16_MAX (65535U)
+#endif
+#ifndef UINT32_MAX
+#define UINT32_MAX (4294967295U)
+#endif
+
+#endif /* ! FLEXINT_H */
+
+#ifdef __cplusplus
+
+/* The "const" storage-class-modifier is valid. */
+#define YY_USE_CONST
+
+#else /* ! __cplusplus */
+
+/* C99 requires __STDC__ to be defined as 1. */
+#if defined (__STDC__)
+
+#define YY_USE_CONST
+
+#endif /* defined (__STDC__) */
+#endif /* ! __cplusplus */
+
+#ifdef YY_USE_CONST
+#define yyconst const
+#else
+#define yyconst
+#endif
+
+/* Returned upon end-of-file. */
+#define YY_NULL 0
+
+/* Promotes a possibly negative, possibly signed char to an unsigned
+ * integer for use as an array index. If the signed char is negative,
+ * we want to instead treat it as an 8-bit unsigned char, hence the
+ * double cast.
+ */
+#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
+
+/* Enter a start condition. This macro really ought to take a parameter,
+ * but we do it the disgusting crufty way forced on us by the ()-less
+ * definition of BEGIN.
+ */
+#define BEGIN (yy_start) = 1 + 2 *
+
+/* Translate the current start state into a value that can be later handed
+ * to BEGIN to return to the state. The YYSTATE alias is for lex
+ * compatibility.
+ */
+#define YY_START (((yy_start) - 1) / 2)
+#define YYSTATE YY_START
+
+/* Action number for EOF rule of a given start state. */
+#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
+
+/* Special action meaning "start processing a new file". */
+#define YY_NEW_FILE yyrestart(yyin )
+
+#define YY_END_OF_BUFFER_CHAR 0
+
+/* Size of default input buffer. */
+#ifndef YY_BUF_SIZE
+#define YY_BUF_SIZE 16384
+#endif
+
+/* The state buf must be large enough to hold one state per character in the main buffer.
+ */
+#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
+
+#ifndef YY_TYPEDEF_YY_BUFFER_STATE
+#define YY_TYPEDEF_YY_BUFFER_STATE
+typedef struct yy_buffer_state *YY_BUFFER_STATE;
+#endif
+
+extern int yyleng;
+
+extern FILE *yyin, *yyout;
+
+#define EOB_ACT_CONTINUE_SCAN 0
+#define EOB_ACT_END_OF_FILE 1
+#define EOB_ACT_LAST_MATCH 2
+
+ /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
+ * access to the local variable yy_act. Since yyless() is a macro, it would break
+ * existing scanners that call yyless() from OUTSIDE yylex.
+ * One obvious solution it to make yy_act a global. I tried that, and saw
+ * a 5% performance hit in a non-yylineno scanner, because yy_act is
+ * normally declared as a register variable-- so it is not worth it.
+ */
+ #define YY_LESS_LINENO(n) \
+ do { \
+ int yyl;\
+ for ( yyl = n; yyl < yyleng; ++yyl )\
+ if ( yytext[yyl] == '\n' )\
+ --yylineno;\
+ }while(0)
+
+/* Return all but the first "n" matched characters back to the input stream. */
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up yytext again */ \
+ } \
+ while ( 0 )
+
+#define unput(c) yyunput( c, (yytext_ptr) )
+
+/* The following is because we cannot portably get our hands on size_t
+ * (without autoconf's help, which isn't available because we want
+ * flex-generated scanners to compile on their own).
+ * Given that the standard has decreed that size_t exists since 1989,
+ * I guess we can afford to depend on it. Manoj.
+ */
+
+#ifndef YY_TYPEDEF_YY_SIZE_T
+#define YY_TYPEDEF_YY_SIZE_T
+typedef size_t yy_size_t;
+#endif
+
+#ifndef YY_STRUCT_YY_BUFFER_STATE
+#define YY_STRUCT_YY_BUFFER_STATE
+struct yy_buffer_state
+ {
+ FILE *yy_input_file;
+
+ char *yy_ch_buf; /* input buffer */
+ char *yy_buf_pos; /* current position in input buffer */
+
+ /* Size of input buffer in bytes, not including room for EOB
+ * characters.
+ */
+ yy_size_t yy_buf_size;
+
+ /* Number of characters read into yy_ch_buf, not including EOB
+ * characters.
+ */
+ int yy_n_chars;
+
+ /* Whether we "own" the buffer - i.e., we know we created it,
+ * and can realloc() it to grow it, and should free() it to
+ * delete it.
+ */
+ int yy_is_our_buffer;
+
+ /* Whether this is an "interactive" input source; if so, and
+ * if we're using stdio for input, then we want to use getc()
+ * instead of fread(), to make sure we stop fetching input after
+ * each newline.
+ */
+ int yy_is_interactive;
+
+ /* Whether we're considered to be at the beginning of a line.
+ * If so, '^' rules will be active on the next match, otherwise
+ * not.
+ */
+ int yy_at_bol;
+
+ int yy_bs_lineno; /**< The line count. */
+ int yy_bs_column; /**< The column count. */
+
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
+
+ int yy_buffer_status;
+
+#define YY_BUFFER_NEW 0
+#define YY_BUFFER_NORMAL 1
+ /* When an EOF's been seen but there's still some text to process
+ * then we mark the buffer as YY_EOF_PENDING, to indicate that we
+ * shouldn't try reading from the input source any more. We might
+ * still have a bunch of tokens to match, though, because of
+ * possible backing-up.
+ *
+ * When we actually see the EOF, we change the status to "new"
+ * (via yyrestart()), so that the user can continue scanning by
+ * just pointing yyin at a new input file.
+ */
+#define YY_BUFFER_EOF_PENDING 2
+
+ };
+#endif /* !YY_STRUCT_YY_BUFFER_STATE */
+
+/* Stack of input buffers. */
+static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
+static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
+static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+
+/* We provide macros for accessing buffer states in case in the
+ * future we want to put the buffer states in a more general
+ * "scanner state".
+ *
+ * Returns the top of the stack, or NULL.
+ */
+#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
+ ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
+ : NULL)
+
+/* Same as previous macro, but useful when we know that the buffer stack is not
+ * NULL or when we need an lvalue. For internal use only.
+ */
+#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
+
+/* yy_hold_char holds the character lost when yytext is formed. */
+static char yy_hold_char;
+static int yy_n_chars; /* number of characters read into yy_ch_buf */
+int yyleng;
+
+/* Points to current character in buffer. */
+static char *yy_c_buf_p = (char *) 0;
+static int yy_init = 0; /* whether we need to initialize */
+static int yy_start = 0; /* start state number */
+
+/* Flag which is used to allow yywrap()'s to do buffer switches
+ * instead of setting up a fresh yyin. A bit of a hack ...
+ */
+static int yy_did_buffer_switch_on_eof;
+
+void yyrestart (FILE *input_file );
+void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
+YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
+void yy_delete_buffer (YY_BUFFER_STATE b );
+void yy_flush_buffer (YY_BUFFER_STATE b );
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
+void yypop_buffer_state (void );
+
+static void yyensure_buffer_stack (void );
+static void yy_load_buffer_state (void );
+static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
+
+#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
+
+YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
+YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
+YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
+
+void *yyalloc (yy_size_t );
+void *yyrealloc (void *,yy_size_t );
+void yyfree (void * );
+
+#define yy_new_buffer yy_create_buffer
+
+#define yy_set_interactive(is_interactive) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){ \
+ yyensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
+
+#define yy_set_bol(at_bol) \
+ { \
+ if ( ! YY_CURRENT_BUFFER ){\
+ yyensure_buffer_stack (); \
+ YY_CURRENT_BUFFER_LVALUE = \
+ yy_create_buffer(yyin,YY_BUF_SIZE ); \
+ } \
+ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
+
+#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
+
+/* Begin user sect3 */
+
+#define yywrap(n) 1
+#define YY_SKIP_YYWRAP
+
+typedef unsigned char YY_CHAR;
+
+FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
+
+typedef int yy_state_type;
+
+extern int yylineno;
+
+int yylineno = 1;
+
+extern char *yytext;
+#define yytext_ptr yytext
+
+static yy_state_type yy_get_previous_state (void );
+static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
+static int yy_get_next_buffer (void );
+static void yy_fatal_error (yyconst char msg[] );
+
+/* Done after the current pattern has been matched and before the
+ * corresponding action - sets up yytext.
+ */
+#define YY_DO_BEFORE_ACTION \
+ (yytext_ptr) = yy_bp; \
+ yyleng = (size_t) (yy_cp - yy_bp); \
+ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+ (yy_c_buf_p) = yy_cp;
+
+#define YY_NUM_RULES 20
+#define YY_END_OF_BUFFER 21
+/* This struct is not used in this scanner,
+ but its presence is necessary. */
+struct yy_trans_info
+ {
+ flex_int32_t yy_verify;
+ flex_int32_t yy_nxt;
+ };
+static yyconst flex_int16_t yy_accept[104] =
+ { 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 21, 19, 16, 16, 19, 19, 19, 7, 7, 19,
+ 7, 19, 19, 19, 19, 13, 14, 14, 19, 8,
+ 8, 16, 0, 2, 0, 0, 9, 0, 0, 0,
+ 0, 0, 0, 7, 7, 5, 0, 6, 0, 12,
+ 12, 14, 14, 8, 0, 11, 9, 0, 0, 0,
+ 0, 18, 0, 0, 0, 0, 8, 0, 17, 0,
+ 0, 0, 0, 0, 10, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 15,
+ 0, 0, 0, 0, 0, 0, 0, 0, 1, 0,
+
+ 0, 4, 0
+ } ;
+
+static yyconst flex_int32_t yy_ec[256] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
+ 2, 2, 2, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 2, 1, 4, 5, 1, 1, 6, 1, 1,
+ 1, 7, 8, 8, 9, 8, 10, 11, 12, 13,
+ 13, 13, 13, 13, 13, 13, 13, 14, 1, 1,
+ 1, 1, 8, 8, 15, 15, 15, 15, 15, 15,
+ 16, 16, 16, 16, 16, 16, 16, 16, 16, 16,
+ 16, 16, 16, 16, 16, 16, 16, 17, 16, 16,
+ 1, 18, 19, 1, 16, 1, 15, 20, 21, 22,
+
+ 23, 15, 16, 24, 25, 16, 16, 26, 27, 28,
+ 24, 16, 16, 29, 30, 31, 32, 33, 16, 17,
+ 16, 16, 34, 1, 35, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1
+ } ;
+
+static yyconst flex_int32_t yy_meta[36] =
+ { 0,
+ 1, 1, 1, 1, 2, 1, 2, 2, 2, 3,
+ 4, 4, 4, 5, 6, 7, 7, 1, 1, 6,
+ 6, 6, 6, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 8, 1
+ } ;
+
+static yyconst flex_int16_t yy_base[117] =
+ { 0,
+ 0, 0, 30, 0, 44, 0, 67, 0, 97, 105,
+ 302, 303, 35, 44, 40, 94, 112, 0, 129, 152,
+ 296, 295, 159, 0, 176, 303, 0, 116, 95, 165,
+ 49, 46, 102, 303, 296, 0, 0, 288, 290, 293,
+ 264, 266, 270, 0, 0, 303, 0, 303, 264, 303,
+ 0, 0, 195, 101, 0, 0, 0, 0, 284, 125,
+ 277, 265, 225, 230, 216, 218, 0, 202, 224, 221,
+ 217, 107, 196, 188, 303, 206, 179, 186, 178, 185,
+ 183, 162, 161, 150, 169, 160, 145, 125, 303, 303,
+ 137, 109, 190, 103, 203, 167, 108, 197, 303, 123,
+
+ 29, 303, 303, 215, 221, 226, 229, 234, 240, 246,
+ 250, 257, 265, 270, 275, 282
+ } ;
+
+static yyconst flex_int16_t yy_def[117] =
+ { 0,
+ 103, 1, 1, 3, 3, 5, 103, 7, 3, 3,
+ 103, 103, 103, 103, 104, 105, 103, 106, 103, 19,
+ 19, 20, 103, 107, 20, 103, 108, 109, 105, 103,
+ 103, 103, 104, 103, 104, 110, 111, 103, 112, 113,
+ 103, 103, 103, 106, 19, 103, 20, 103, 103, 103,
+ 20, 108, 109, 103, 114, 110, 111, 115, 112, 112,
+ 113, 103, 103, 103, 103, 103, 114, 115, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 116, 103, 116, 103, 116,
+
+ 103, 103, 0, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103
+ } ;
+
+static yyconst flex_int16_t yy_nxt[339] =
+ { 0,
+ 12, 13, 14, 15, 12, 16, 12, 12, 12, 17,
+ 18, 18, 18, 12, 19, 20, 20, 12, 12, 21,
+ 19, 21, 19, 22, 20, 20, 20, 20, 20, 20,
+ 20, 20, 20, 12, 12, 12, 32, 32, 102, 23,
+ 12, 12, 12, 34, 20, 32, 32, 32, 32, 20,
+ 20, 20, 20, 20, 24, 24, 24, 35, 25, 54,
+ 54, 54, 26, 25, 25, 25, 25, 12, 13, 14,
+ 15, 27, 12, 27, 27, 27, 23, 27, 27, 27,
+ 12, 28, 28, 28, 12, 12, 28, 28, 28, 28,
+ 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+
+ 12, 12, 29, 36, 103, 34, 17, 30, 31, 31,
+ 29, 54, 54, 54, 17, 30, 31, 31, 39, 35,
+ 52, 40, 52, 52, 52, 103, 78, 38, 38, 46,
+ 101, 60, 79, 41, 69, 97, 42, 94, 43, 45,
+ 45, 45, 46, 45, 47, 47, 93, 92, 45, 45,
+ 45, 45, 47, 47, 47, 47, 47, 47, 47, 47,
+ 47, 47, 47, 47, 47, 39, 47, 91, 40, 90,
+ 99, 47, 47, 47, 47, 54, 54, 54, 89, 88,
+ 41, 55, 87, 49, 100, 43, 51, 51, 51, 86,
+ 51, 95, 95, 96, 85, 51, 51, 51, 51, 52,
+
+ 99, 52, 52, 52, 95, 95, 96, 84, 46, 83,
+ 82, 81, 39, 79, 100, 33, 33, 33, 33, 33,
+ 33, 33, 33, 37, 80, 77, 37, 37, 37, 44,
+ 40, 44, 50, 76, 50, 52, 75, 52, 74, 52,
+ 52, 53, 73, 53, 53, 53, 53, 56, 56, 56,
+ 72, 56, 56, 57, 71, 57, 57, 59, 59, 59,
+ 59, 59, 59, 59, 59, 61, 61, 61, 61, 61,
+ 61, 61, 61, 67, 70, 67, 68, 68, 68, 62,
+ 68, 68, 98, 98, 98, 98, 98, 98, 98, 98,
+ 60, 66, 65, 64, 63, 62, 60, 58, 103, 48,
+
+ 48, 103, 11, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103
+ } ;
+
+static yyconst flex_int16_t yy_chk[339] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 3, 13, 13, 101, 3,
+ 3, 3, 3, 15, 3, 14, 14, 32, 32, 3,
+ 3, 3, 3, 3, 5, 5, 5, 15, 5, 31,
+ 31, 31, 5, 5, 5, 5, 5, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+
+ 7, 7, 9, 16, 29, 33, 9, 9, 9, 9,
+ 10, 54, 54, 54, 10, 10, 10, 10, 17, 33,
+ 28, 17, 28, 28, 28, 100, 72, 16, 29, 28,
+ 97, 60, 72, 17, 60, 94, 17, 92, 17, 19,
+ 19, 19, 19, 19, 19, 19, 91, 88, 19, 19,
+ 19, 19, 19, 19, 19, 19, 19, 19, 19, 19,
+ 19, 19, 20, 20, 20, 23, 20, 87, 23, 86,
+ 96, 20, 20, 20, 20, 30, 30, 30, 85, 84,
+ 23, 30, 83, 23, 96, 23, 25, 25, 25, 82,
+ 25, 93, 93, 93, 81, 25, 25, 25, 25, 53,
+
+ 98, 53, 53, 53, 95, 95, 95, 80, 53, 79,
+ 78, 77, 76, 74, 98, 104, 104, 104, 104, 104,
+ 104, 104, 104, 105, 73, 71, 105, 105, 105, 106,
+ 70, 106, 107, 69, 107, 108, 68, 108, 66, 108,
+ 108, 109, 65, 109, 109, 109, 109, 110, 110, 110,
+ 64, 110, 110, 111, 63, 111, 111, 112, 112, 112,
+ 112, 112, 112, 112, 112, 113, 113, 113, 113, 113,
+ 113, 113, 113, 114, 62, 114, 115, 115, 115, 61,
+ 115, 115, 116, 116, 116, 116, 116, 116, 116, 116,
+ 59, 49, 43, 42, 41, 40, 39, 38, 35, 22,
+
+ 21, 11, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103, 103, 103,
+ 103, 103, 103, 103, 103, 103, 103, 103
+ } ;
+
+/* Table of booleans, true if rule could match eol. */
+static yyconst flex_int32_t yy_rule_can_match_eol[21] =
+ { 0,
+1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0,
+ 0, };
+
+static yy_state_type yy_last_accepting_state;
+static char *yy_last_accepting_cpos;
+
+extern int yy_flex_debug;
+int yy_flex_debug = 0;
+
+/* The intent behind this definition is that it'll catch
+ * any uses of REJECT which flex missed.
+ */
+#define REJECT reject_used_but_not_detected
+#define yymore() yymore_used_but_not_detected
+#define YY_MORE_ADJ 0
+#define YY_RESTORE_YY_MORE_OFFSET
+char *yytext;
+#line 1 "dtc-lexer.l"
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+
+
+
+#line 37 "dtc-lexer.l"
+#include "dtc.h"
+#include "srcpos.h"
+#include "dtc-parser.tab.h"
+
+
+/*#define LEXDEBUG 1*/
+
+#ifdef LEXDEBUG
+#define DPRINT(fmt, ...) fprintf(stderr, fmt, ##__VA_ARGS__)
+#else
+#define DPRINT(fmt, ...) do { } while (0)
+#endif
+
+static int dts_version; /* = 0 */
+
+#define BEGIN_DEFAULT() if (dts_version == 0) { \
+ DPRINT("<INITIAL>\n"); \
+ BEGIN(INITIAL); \
+ } else { \
+ DPRINT("<V1>\n"); \
+ BEGIN(V1); \
+ }
+
+static void push_input_file(const char *filename);
+static int pop_input_file(void);
+#line 638 "dtc-lexer.lex.c"
+
+#define INITIAL 0
+#define INCLUDE 1
+#define BYTESTRING 2
+#define PROPNODENAME 3
+#define V1 4
+
+#ifndef YY_NO_UNISTD_H
+/* Special case for "unistd.h", since it is non-ANSI. We include it way
+ * down here because we want the user's section 1 to have been scanned first.
+ * The user has a chance to override it with an option.
+ */
+#include <unistd.h>
+#endif
+
+#ifndef YY_EXTRA_TYPE
+#define YY_EXTRA_TYPE void *
+#endif
+
+static int yy_init_globals (void );
+
+/* Macros after this point can all be overridden by user definitions in
+ * section 1.
+ */
+
+#ifndef YY_SKIP_YYWRAP
+#ifdef __cplusplus
+extern "C" int yywrap (void );
+#else
+extern int yywrap (void );
+#endif
+#endif
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char *,yyconst char *,int );
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * );
+#endif
+
+#ifndef YY_NO_INPUT
+
+#ifdef __cplusplus
+static int yyinput (void );
+#else
+static int input (void );
+#endif
+
+#endif
+
+/* Amount of stuff to slurp up with each read. */
+#ifndef YY_READ_BUF_SIZE
+#define YY_READ_BUF_SIZE 8192
+#endif
+
+/* Copy whatever the last rule matched to the standard output. */
+#ifndef ECHO
+/* This used to be an fputs(), but since the string might contain NUL's,
+ * we now use fwrite().
+ */
+#define ECHO fwrite( yytext, yyleng, 1, yyout )
+#endif
+
+/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
+ * is returned in "result".
+ */
+#ifndef YY_INPUT
+#define YY_INPUT(buf,result,max_size) \
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+ { \
+ int c = '*'; \
+ int n; \
+ for ( n = 0; n < max_size && \
+ (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
+ buf[n] = (char) c; \
+ if ( c == '\n' ) \
+ buf[n++] = (char) c; \
+ if ( c == EOF && ferror( yyin ) ) \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ result = n; \
+ } \
+ else \
+ { \
+ errno=0; \
+ while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
+ { \
+ if( errno != EINTR) \
+ { \
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ break; \
+ } \
+ errno=0; \
+ clearerr(yyin); \
+ } \
+ }\
+\
+
+#endif
+
+/* No semi-colon after return; correct usage is to write "yyterminate();" -
+ * we don't want an extra ';' after the "return" because that will cause
+ * some compilers to complain about unreachable statements.
+ */
+#ifndef yyterminate
+#define yyterminate() return YY_NULL
+#endif
+
+/* Number of entries by which start-condition stack grows. */
+#ifndef YY_START_STACK_INCR
+#define YY_START_STACK_INCR 25
+#endif
+
+/* Report a fatal error. */
+#ifndef YY_FATAL_ERROR
+#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
+#endif
+
+/* end tables serialization structures and prototypes */
+
+/* Default declaration of generated scanner - a define so the user can
+ * easily add parameters.
+ */
+#ifndef YY_DECL
+#define YY_DECL_IS_OURS 1
+
+extern int yylex (void);
+
+#define YY_DECL int yylex (void)
+#endif /* !YY_DECL */
+
+/* Code executed at the beginning of each rule, after yytext and yyleng
+ * have been set up.
+ */
+#ifndef YY_USER_ACTION
+#define YY_USER_ACTION
+#endif
+
+/* Code executed at the end of each rule. */
+#ifndef YY_BREAK
+#define YY_BREAK break;
+#endif
+
+#define YY_RULE_SETUP \
+ YY_USER_ACTION
+
+/** The main scanner function which does all the work.
+ */
+YY_DECL
+{
+ register yy_state_type yy_current_state;
+ register char *yy_cp, *yy_bp;
+ register int yy_act;
+
+#line 64 "dtc-lexer.l"
+
+#line 795 "dtc-lexer.lex.c"
+
+ if ( !(yy_init) )
+ {
+ (yy_init) = 1;
+
+#ifdef YY_USER_INIT
+ YY_USER_INIT;
+#endif
+
+ if ( ! (yy_start) )
+ (yy_start) = 1; /* first start state */
+
+ if ( ! yyin )
+ yyin = stdin;
+
+ if ( ! yyout )
+ yyout = stdout;
+
+ if ( ! YY_CURRENT_BUFFER ) {
+ yyensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
+ yy_load_buffer_state( );
+ }
+
+ while ( 1 ) /* loops until end-of-file is reached */
+ {
+ yy_cp = (yy_c_buf_p);
+
+ /* Support of yytext. */
+ *yy_cp = (yy_hold_char);
+
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
+
+ yy_current_state = (yy_start);
+yy_match:
+ do
+ {
+ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 104 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ ++yy_cp;
+ }
+ while ( yy_base[yy_current_state] != 303 );
+
+yy_find_action:
+ yy_act = yy_accept[yy_current_state];
+ if ( yy_act == 0 )
+ { /* have to back up */
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ yy_act = yy_accept[yy_current_state];
+ }
+
+ YY_DO_BEFORE_ACTION;
+
+ if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
+ {
+ int yyl;
+ for ( yyl = 0; yyl < yyleng; ++yyl )
+ if ( yytext[yyl] == '\n' )
+
+ yylineno++;
+;
+ }
+
+do_action: /* This label is used only to access EOF actions. */
+
+ switch ( yy_act )
+ { /* beginning of action switch */
+ case 0: /* must back up */
+ /* undo the effects of YY_DO_BEFORE_ACTION */
+ *yy_cp = (yy_hold_char);
+ yy_cp = (yy_last_accepting_cpos);
+ yy_current_state = (yy_last_accepting_state);
+ goto yy_find_action;
+
+case 1:
+/* rule 1 can match eol */
+YY_RULE_SETUP
+#line 65 "dtc-lexer.l"
+{
+ char *name = strchr(yytext, '\"') + 1;
+ yytext[yyleng-1] = '\0';
+ push_input_file(name);
+ }
+ YY_BREAK
+case YY_STATE_EOF(INITIAL):
+case YY_STATE_EOF(INCLUDE):
+case YY_STATE_EOF(BYTESTRING):
+case YY_STATE_EOF(PROPNODENAME):
+case YY_STATE_EOF(V1):
+#line 71 "dtc-lexer.l"
+{
+ if (!pop_input_file()) {
+ yyterminate();
+ }
+ }
+ YY_BREAK
+case 2:
+/* rule 2 can match eol */
+YY_RULE_SETUP
+#line 77 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("String: %s\n", yytext);
+ yylval.data = data_copy_escape_string(yytext+1,
+ yyleng-2);
+ yylloc.first_line = yylineno;
+ return DT_STRING;
+ }
+ YY_BREAK
+case 3:
+YY_RULE_SETUP
+#line 87 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /dts-v1/\n");
+ dts_version = 1;
+ BEGIN_DEFAULT();
+ return DT_V1;
+ }
+ YY_BREAK
+case 4:
+YY_RULE_SETUP
+#line 96 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Keyword: /memreserve/\n");
+ BEGIN_DEFAULT();
+ return DT_MEMRESERVE;
+ }
+ YY_BREAK
+case 5:
+YY_RULE_SETUP
+#line 104 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Label: %s\n", yytext);
+ yylval.labelref = strdup(yytext);
+ yylval.labelref[yyleng-1] = '\0';
+ return DT_LABEL;
+ }
+ YY_BREAK
+case 6:
+YY_RULE_SETUP
+#line 113 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ if (*yytext == 'b')
+ yylval.cbase = 2;
+ else if (*yytext == 'o')
+ yylval.cbase = 8;
+ else if (*yytext == 'd')
+ yylval.cbase = 10;
+ else
+ yylval.cbase = 16;
+ DPRINT("Base: %d\n", yylval.cbase);
+ return DT_BASE;
+ }
+ YY_BREAK
+case 7:
+YY_RULE_SETUP
+#line 128 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LEGACYLITERAL;
+ }
+ YY_BREAK
+case 8:
+YY_RULE_SETUP
+#line 136 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.literal = strdup(yytext);
+ DPRINT("Literal: '%s'\n", yylval.literal);
+ return DT_LITERAL;
+ }
+ YY_BREAK
+case 9:
+YY_RULE_SETUP
+#line 144 "dtc-lexer.l"
+{ /* label reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+ YY_BREAK
+case 10:
+YY_RULE_SETUP
+#line 152 "dtc-lexer.l"
+{ /* new-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yytext[yyleng-1] = '\0';
+ DPRINT("Ref: %s\n", yytext+2);
+ yylval.labelref = strdup(yytext+2);
+ return DT_REF;
+ }
+ YY_BREAK
+case 11:
+YY_RULE_SETUP
+#line 161 "dtc-lexer.l"
+{ /* old-style path reference */
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Ref: %s\n", yytext+1);
+ yylval.labelref = strdup(yytext+1);
+ return DT_REF;
+ }
+ YY_BREAK
+case 12:
+YY_RULE_SETUP
+#line 169 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ yylval.byte = strtol(yytext, NULL, 16);
+ DPRINT("Byte: %02x\n", (int)yylval.byte);
+ return DT_BYTE;
+ }
+ YY_BREAK
+case 13:
+YY_RULE_SETUP
+#line 177 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("/BYTESTRING\n");
+ BEGIN_DEFAULT();
+ return ']';
+ }
+ YY_BREAK
+case 14:
+YY_RULE_SETUP
+#line 185 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("PropNodeName: %s\n", yytext);
+ yylval.propnodename = strdup(yytext);
+ BEGIN_DEFAULT();
+ return DT_PROPNODENAME;
+ }
+ YY_BREAK
+case 15:
+YY_RULE_SETUP
+#line 194 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Binary Include\n");
+ return DT_INCBIN;
+ }
+ YY_BREAK
+case 16:
+/* rule 16 can match eol */
+YY_RULE_SETUP
+#line 201 "dtc-lexer.l"
+/* eat whitespace */
+ YY_BREAK
+case 17:
+/* rule 17 can match eol */
+YY_RULE_SETUP
+#line 202 "dtc-lexer.l"
+/* eat C-style comments */
+ YY_BREAK
+case 18:
+/* rule 18 can match eol */
+YY_RULE_SETUP
+#line 203 "dtc-lexer.l"
+/* eat C++-style comments */
+ YY_BREAK
+case 19:
+YY_RULE_SETUP
+#line 205 "dtc-lexer.l"
+{
+ yylloc.file = srcpos_file;
+ yylloc.first_line = yylineno;
+ DPRINT("Char: %c (\\x%02x)\n", yytext[0],
+ (unsigned)yytext[0]);
+ if (yytext[0] == '[') {
+ DPRINT("<BYTESTRING>\n");
+ BEGIN(BYTESTRING);
+ }
+ if ((yytext[0] == '{')
+ || (yytext[0] == ';')) {
+ DPRINT("<PROPNODENAME>\n");
+ BEGIN(PROPNODENAME);
+ }
+ return yytext[0];
+ }
+ YY_BREAK
+case 20:
+YY_RULE_SETUP
+#line 222 "dtc-lexer.l"
+ECHO;
+ YY_BREAK
+#line 1120 "dtc-lexer.lex.c"
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed yyin at a new source and called
+ * yylex(). If so, then we have to assure
+ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+ * of the first EOB in the buffer, since yy_c_buf_p will
+ * already have been incremented past the NUL character
+ * (since all states make transitions on EOB to the
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+ * yy_get_previous_state() go ahead and do it
+ * for us because it doesn't know how to deal
+ * with the possibility of jamming (and we don't
+ * want to build jamming into it because then it
+ * will run more slowly).
+ */
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+ (yy_did_buffer_switch_on_eof) = 0;
+
+ if ( yywrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+ * yytext, we can now set up
+ * yy_c_buf_p so that if some total
+ * hoser (like flex itself) wants to
+ * call the scanner after we return the
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+ }
+
+ else
+ {
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) =
+ (yytext_ptr) + yy_amount_of_matched_text;
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+ (yy_c_buf_p) =
+ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+ yy_current_state = yy_get_previous_state( );
+
+ yy_cp = (yy_c_buf_p);
+ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+ }
+
+ default:
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
+} /* end of yylex */
+
+/* yy_get_next_buffer - try to read in a new buffer
+ *
+ * Returns a code representing an action:
+ * EOB_ACT_LAST_MATCH -
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
+ */
+static int yy_get_next_buffer (void)
+{
+ register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
+ register char *source = (yytext_ptr);
+ register int number_to_move, i;
+ int ret_val;
+
+ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+ */
+ return EOB_ACT_END_OF_FILE;
+ }
+
+ else
+ {
+ /* We matched some text prior to the EOB, first
+ * process it.
+ */
+ return EOB_ACT_LAST_MATCH;
+ }
+ }
+
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+ int num_to_read =
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+
+ /* just a shorter name for the current buffer */
+ YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+
+ int yy_c_buf_p_offset =
+ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+ int new_size = b->yy_buf_size * 2;
+
+ if ( new_size <= 0 )
+ b->yy_buf_size += b->yy_buf_size / 8;
+ else
+ b->yy_buf_size *= 2;
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+ yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+ b->yy_ch_buf = 0;
+
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
+
+ /* Read in more data. */
+ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
+ (yy_n_chars), (size_t) num_to_read );
+
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+ yyrestart(yyin );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+ if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
+ /* Extend the array by 50%, plus the number we really need. */
+ yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
+ if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
+ }
+
+ (yy_n_chars) += number_to_move;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
+ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+ return ret_val;
+}
+
+/* yy_get_previous_state - get the state just before the EOB char was reached */
+
+ static yy_state_type yy_get_previous_state (void)
+{
+ register yy_state_type yy_current_state;
+ register char *yy_cp;
+
+ yy_current_state = (yy_start);
+
+ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 104 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ }
+
+ return yy_current_state;
+}
+
+/* yy_try_NUL_trans - try to make a transition on the NUL character
+ *
+ * synopsis
+ * next_state = yy_try_NUL_trans( current_state );
+ */
+ static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
+{
+ register int yy_is_jam;
+ register char *yy_cp = (yy_c_buf_p);
+
+ register YY_CHAR yy_c = 1;
+ if ( yy_accept[yy_current_state] )
+ {
+ (yy_last_accepting_state) = yy_current_state;
+ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+ yy_current_state = (int) yy_def[yy_current_state];
+ if ( yy_current_state >= 104 )
+ yy_c = yy_meta[(unsigned int) yy_c];
+ }
+ yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
+ yy_is_jam = (yy_current_state == 103);
+
+ return yy_is_jam ? 0 : yy_current_state;
+}
+
+#ifndef YY_NO_INPUT
+#ifdef __cplusplus
+ static int yyinput (void)
+#else
+ static int input (void)
+#endif
+
+{
+ int c;
+
+ *(yy_c_buf_p) = (yy_hold_char);
+
+ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+ int offset = (yy_c_buf_p) - (yytext_ptr);
+ ++(yy_c_buf_p);
+
+ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+ * sees that we've accumulated a
+ * token and flags that we need to
+ * try matching the token before
+ * proceeding. But for input(),
+ * there's no matching to consider.
+ * So convert the EOB_ACT_LAST_MATCH
+ * to EOB_ACT_END_OF_FILE.
+ */
+
+ /* Reset buffer status. */
+ yyrestart(yyin );
+
+ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+ if ( yywrap( ) )
+ return EOF;
+
+ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+#ifdef __cplusplus
+ return yyinput();
+#else
+ return input();
+#endif
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
+
+ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
+ *(yy_c_buf_p) = '\0'; /* preserve yytext */
+ (yy_hold_char) = *++(yy_c_buf_p);
+
+ if ( c == '\n' )
+
+ yylineno++;
+;
+
+ return c;
+}
+#endif /* ifndef YY_NO_INPUT */
+
+/** Immediately switch to a different input stream.
+ * @param input_file A readable stream.
+ *
+ * @note This function does not reset the start condition to @c INITIAL .
+ */
+ void yyrestart (FILE * input_file )
+{
+
+ if ( ! YY_CURRENT_BUFFER ){
+ yyensure_buffer_stack ();
+ YY_CURRENT_BUFFER_LVALUE =
+ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
+ yy_init_buffer(YY_CURRENT_BUFFER,input_file );
+ yy_load_buffer_state( );
+}
+
+/** Switch to a different input buffer.
+ * @param new_buffer The new input buffer.
+ *
+ */
+ void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
+{
+
+ /* TODO. We should be able to replace this entire function body
+ * with
+ * yypop_buffer_state();
+ * yypush_buffer_state(new_buffer);
+ */
+ yyensure_buffer_stack ();
+ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+ yy_load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (yywrap()) processing, but the only time this flag
+ * is looked at is after yywrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+static void yy_load_buffer_state (void)
+{
+ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
+ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
+ yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
+ (yy_hold_char) = *(yy_c_buf_p);
+}
+
+/** Allocate and initialize an input buffer state.
+ * @param file A readable stream.
+ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
+ *
+ * @return the allocated buffer state.
+ */
+ YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
+{
+ YY_BUFFER_STATE b;
+
+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_buf_size = size;
+
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+ b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_is_our_buffer = 1;
+
+ yy_init_buffer(b,file );
+
+ return b;
+}
+
+/** Destroy the buffer.
+ * @param b a buffer created with yy_create_buffer()
+ *
+ */
+ void yy_delete_buffer (YY_BUFFER_STATE b )
+{
+
+ if ( ! b )
+ return;
+
+ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
+ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+
+ if ( b->yy_is_our_buffer )
+ yyfree((void *) b->yy_ch_buf );
+
+ yyfree((void *) b );
+}
+
+#ifndef __cplusplus
+extern int isatty (int );
+#endif /* __cplusplus */
+
+/* Initializes or reinitializes a buffer.
+ * This function is sometimes called more than once on the same buffer,
+ * such as during a yyrestart() or at EOF.
+ */
+ static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
+
+{
+ int oerrno = errno;
+
+ yy_flush_buffer(b );
+
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
+
+ /* If b is the current buffer, then yy_init_buffer was _probably_
+ * called from yyrestart() or through yy_get_next_buffer.
+ * In that case, we don't want to reset the lineno or column.
+ */
+ if (b != YY_CURRENT_BUFFER){
+ b->yy_bs_lineno = 1;
+ b->yy_bs_column = 0;
+ }
+
+ b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
+
+ errno = oerrno;
+}
+
+/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
+ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
+ *
+ */
+ void yy_flush_buffer (YY_BUFFER_STATE b )
+{
+ if ( ! b )
+ return;
+
+ b->yy_n_chars = 0;
+
+ /* We always need two end-of-buffer characters. The first causes
+ * a transition to the end-of-buffer state. The second causes
+ * a jam in that state.
+ */
+ b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
+ b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
+
+ b->yy_buf_pos = &b->yy_ch_buf[0];
+
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ if ( b == YY_CURRENT_BUFFER )
+ yy_load_buffer_state( );
+}
+
+/** Pushes the new state onto the stack. The new state becomes
+ * the current state. This function will allocate the stack
+ * if necessary.
+ * @param new_buffer The new state.
+ *
+ */
+void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
+{
+ if (new_buffer == NULL)
+ return;
+
+ yyensure_buffer_stack();
+
+ /* This block is copied from yy_switch_to_buffer. */
+ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+ *(yy_c_buf_p) = (yy_hold_char);
+ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
+ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+ /* Only push if top exists. Otherwise, replace top. */
+ if (YY_CURRENT_BUFFER)
+ (yy_buffer_stack_top)++;
+ YY_CURRENT_BUFFER_LVALUE = new_buffer;
+
+ /* copied from yy_switch_to_buffer. */
+ yy_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+}
+
+/** Removes and deletes the top of the stack, if present.
+ * The next element becomes the new top.
+ *
+ */
+void yypop_buffer_state (void)
+{
+ if (!YY_CURRENT_BUFFER)
+ return;
+
+ yy_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ if ((yy_buffer_stack_top) > 0)
+ --(yy_buffer_stack_top);
+
+ if (YY_CURRENT_BUFFER) {
+ yy_load_buffer_state( );
+ (yy_did_buffer_switch_on_eof) = 1;
+ }
+}
+
+/* Allocates the stack if it does not exist.
+ * Guarantees space for at least one push.
+ */
+static void yyensure_buffer_stack (void)
+{
+ int num_to_alloc;
+
+ if (!(yy_buffer_stack)) {
+
+ /* First allocation is just for 2 elements, since we don't know if this
+ * scanner will even need a stack. We use 2 instead of 1 to avoid an
+ * immediate realloc on the next call.
+ */
+ num_to_alloc = 1;
+ (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
+ (num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
+ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
+
+ (yy_buffer_stack_max) = num_to_alloc;
+ (yy_buffer_stack_top) = 0;
+ return;
+ }
+
+ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
+
+ /* Increase the buffer to prepare for a possible push. */
+ int grow_size = 8 /* arbitrary grow size */;
+
+ num_to_alloc = (yy_buffer_stack_max) + grow_size;
+ (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
+ ((yy_buffer_stack),
+ num_to_alloc * sizeof(struct yy_buffer_state*)
+ );
+ if ( ! (yy_buffer_stack) )
+ YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" );
+
+ /* zero only the new slots.*/
+ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
+ (yy_buffer_stack_max) = num_to_alloc;
+ }
+}
+
+/** Setup the input buffer state to scan directly from a user-specified character buffer.
+ * @param base the character buffer
+ * @param size the size in bytes of the character buffer
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
+{
+ YY_BUFFER_STATE b;
+
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
+
+ b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
+ b->yy_buf_pos = b->yy_ch_buf = base;
+ b->yy_is_our_buffer = 0;
+ b->yy_input_file = 0;
+ b->yy_n_chars = b->yy_buf_size;
+ b->yy_is_interactive = 0;
+ b->yy_at_bol = 1;
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+ yy_switch_to_buffer(b );
+
+ return b;
+}
+
+/** Setup the input buffer state to scan a string. The next call to yylex() will
+ * scan from a @e copy of @a str.
+ * @param yystr a NUL-terminated string to scan
+ *
+ * @return the newly allocated buffer state object.
+ * @note If you want to scan bytes that may contain NUL values, then use
+ * yy_scan_bytes() instead.
+ */
+YY_BUFFER_STATE yy_scan_string (yyconst char * yystr )
+{
+
+ return yy_scan_bytes(yystr,strlen(yystr) );
+}
+
+/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
+ * scan from a @e copy of @a bytes.
+ * @param bytes the byte buffer to scan
+ * @param len the number of bytes in the buffer pointed to by @a bytes.
+ *
+ * @return the newly allocated buffer state object.
+ */
+YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
+{
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ int i;
+
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = _yybytes_len + 2;
+ buf = (char *) yyalloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
+
+ for ( i = 0; i < _yybytes_len; ++i )
+ buf[i] = yybytes[i];
+
+ buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
+
+ b = yy_scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
+
+ /* It's okay to grow etc. this buffer, and we should throw it
+ * away when we're done.
+ */
+ b->yy_is_our_buffer = 1;
+
+ return b;
+}
+
+#ifndef YY_EXIT_FAILURE
+#define YY_EXIT_FAILURE 2
+#endif
+
+static void yy_fatal_error (yyconst char* msg )
+{
+ (void) fprintf( stderr, "%s\n", msg );
+ exit( YY_EXIT_FAILURE );
+}
+
+/* Redefine yyless() so it works in section 3 code. */
+
+#undef yyless
+#define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+ int yyless_macro_arg = (n); \
+ YY_LESS_LINENO(yyless_macro_arg);\
+ yytext[yyleng] = (yy_hold_char); \
+ (yy_c_buf_p) = yytext + yyless_macro_arg; \
+ (yy_hold_char) = *(yy_c_buf_p); \
+ *(yy_c_buf_p) = '\0'; \
+ yyleng = yyless_macro_arg; \
+ } \
+ while ( 0 )
+
+/* Accessor methods (get/set functions) to struct members. */
+
+/** Get the current line number.
+ *
+ */
+int yyget_lineno (void)
+{
+
+ return yylineno;
+}
+
+/** Get the input stream.
+ *
+ */
+FILE *yyget_in (void)
+{
+ return yyin;
+}
+
+/** Get the output stream.
+ *
+ */
+FILE *yyget_out (void)
+{
+ return yyout;
+}
+
+/** Get the length of the current token.
+ *
+ */
+int yyget_leng (void)
+{
+ return yyleng;
+}
+
+/** Get the current token.
+ *
+ */
+
+char *yyget_text (void)
+{
+ return yytext;
+}
+
+/** Set the current line number.
+ * @param line_number
+ *
+ */
+void yyset_lineno (int line_number )
+{
+
+ yylineno = line_number;
+}
+
+/** Set the input stream. This does not discard the current
+ * input buffer.
+ * @param in_str A readable stream.
+ *
+ * @see yy_switch_to_buffer
+ */
+void yyset_in (FILE * in_str )
+{
+ yyin = in_str ;
+}
+
+void yyset_out (FILE * out_str )
+{
+ yyout = out_str ;
+}
+
+int yyget_debug (void)
+{
+ return yy_flex_debug;
+}
+
+void yyset_debug (int bdebug )
+{
+ yy_flex_debug = bdebug ;
+}
+
+static int yy_init_globals (void)
+{
+ /* Initialization is the same as for the non-reentrant scanner.
+ * This function is called from yylex_destroy(), so don't allocate here.
+ */
+
+ /* We do not touch yylineno unless the option is enabled. */
+ yylineno = 1;
+
+ (yy_buffer_stack) = 0;
+ (yy_buffer_stack_top) = 0;
+ (yy_buffer_stack_max) = 0;
+ (yy_c_buf_p) = (char *) 0;
+ (yy_init) = 0;
+ (yy_start) = 0;
+
+/* Defined in main.c */
+#ifdef YY_STDINIT
+ yyin = stdin;
+ yyout = stdout;
+#else
+ yyin = (FILE *) 0;
+ yyout = (FILE *) 0;
+#endif
+
+ /* For future reference: Set errno on error, since we are called by
+ * yylex_init()
+ */
+ return 0;
+}
+
+/* yylex_destroy is for both reentrant and non-reentrant scanners. */
+int yylex_destroy (void)
+{
+
+ /* Pop the buffer stack, destroying each element. */
+ while(YY_CURRENT_BUFFER){
+ yy_delete_buffer(YY_CURRENT_BUFFER );
+ YY_CURRENT_BUFFER_LVALUE = NULL;
+ yypop_buffer_state();
+ }
+
+ /* Destroy the stack itself. */
+ yyfree((yy_buffer_stack) );
+ (yy_buffer_stack) = NULL;
+
+ /* Reset the globals. This is important in a non-reentrant scanner so the next time
+ * yylex() is called, initialization will occur. */
+ yy_init_globals( );
+
+ return 0;
+}
+
+/*
+ * Internal utility routines.
+ */
+
+#ifndef yytext_ptr
+static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
+{
+ register int i;
+ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
+}
+#endif
+
+#ifdef YY_NEED_STRLEN
+static int yy_flex_strlen (yyconst char * s )
+{
+ register int n;
+ for ( n = 0; s[n]; ++n )
+ ;
+
+ return n;
+}
+#endif
+
+void *yyalloc (yy_size_t size )
+{
+ return (void *) malloc( size );
+}
+
+void *yyrealloc (void * ptr, yy_size_t size )
+{
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+ * because both ANSI C and C++ allow castless assignment from
+ * any pointer type to void*, and deal with argument conversions
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
+}
+
+void yyfree (void * ptr )
+{
+ free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
+}
+
+#define YYTABLES_NAME "yytables"
+
+#line 222 "dtc-lexer.l"
+
+
+
+
+/*
+ * Stack of nested include file contexts.
+ */
+
+struct incl_file {
+ struct dtc_file *file;
+ YY_BUFFER_STATE yy_prev_buf;
+ int yy_prev_lineno;
+ struct incl_file *prev;
+};
+
+static struct incl_file *incl_file_stack;
+
+
+/*
+ * Detect infinite include recursion.
+ */
+#define MAX_INCLUDE_DEPTH (100)
+
+static int incl_depth = 0;
+
+
+static void push_input_file(const char *filename)
+{
+ struct incl_file *incl_file;
+ struct dtc_file *newfile;
+ struct search_path search, *searchptr = NULL;
+
+ assert(filename);
+
+ if (incl_depth++ >= MAX_INCLUDE_DEPTH)
+ die("Includes nested too deeply");
+
+ if (srcpos_file) {
+ search.dir = srcpos_file->dir;
+ search.next = NULL;
+ search.prev = NULL;
+ searchptr = &search;
+ }
+
+ newfile = dtc_open_file(filename, searchptr);
+
+ incl_file = xmalloc(sizeof(struct incl_file));
+
+ /*
+ * Save current context.
+ */
+ incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
+ incl_file->yy_prev_lineno = yylineno;
+ incl_file->file = srcpos_file;
+ incl_file->prev = incl_file_stack;
+
+ incl_file_stack = incl_file;
+
+ /*
+ * Establish new context.
+ */
+ srcpos_file = newfile;
+ yylineno = 1;
+ yyin = newfile->file;
+ yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
+}
+
+
+static int pop_input_file(void)
+{
+ struct incl_file *incl_file;
+
+ if (incl_file_stack == 0)
+ return 0;
+
+ dtc_close_file(srcpos_file);
+
+ /*
+ * Pop.
+ */
+ --incl_depth;
+ incl_file = incl_file_stack;
+ incl_file_stack = incl_file->prev;
+
+ /*
+ * Recover old context.
+ */
+ yy_delete_buffer(YY_CURRENT_BUFFER);
+ yy_switch_to_buffer(incl_file->yy_prev_buf);
+ yylineno = incl_file->yy_prev_lineno;
+ srcpos_file = incl_file->file;
+ yyin = incl_file->file ? incl_file->file->file : NULL;
+
+ /*
+ * Free old state.
+ */
+ free(incl_file);
+
+ return 1;
+}
+
--- /dev/null
+/* A Bison parser, made by GNU Bison 2.3. */
+
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
+
+/* As a special exception, you may create a larger work that contains
+ part or all of the Bison parser skeleton and distribute that work
+ under terms of your choice, so long as that work isn't itself a
+ parser generator using the skeleton or a modified version thereof
+ as a parser skeleton. Alternatively, if you modify or redistribute
+ the parser skeleton itself, you may (at your option) remove this
+ special exception, which will cause the skeleton and the resulting
+ Bison output files to be licensed under the GNU General Public
+ License without this special exception.
+
+ This special exception was added by the Free Software Foundation in
+ version 2.2 of Bison. */
+
+/* C LALR(1) parser skeleton written by Richard Stallman, by
+ simplifying the original so-called "semantic" parser. */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+ infringing on user name space. This should be done even for local
+ variables, as they might otherwise be expanded by user macros.
+ There are some unavoidable exceptions within include files to
+ define necessary library symbols; they are noted "INFRINGES ON
+ USER NAME SPACE" below. */
+
+/* Identify Bison output. */
+#define YYBISON 1
+
+/* Bison version. */
+#define YYBISON_VERSION "2.3"
+
+/* Skeleton name. */
+#define YYSKELETON_NAME "yacc.c"
+
+/* Pure parsers. */
+#define YYPURE 0
+
+/* Using locations. */
+#define YYLSP_NEEDED 1
+
+
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ DT_V1 = 258,
+ DT_MEMRESERVE = 259,
+ DT_PROPNODENAME = 260,
+ DT_LITERAL = 261,
+ DT_LEGACYLITERAL = 262,
+ DT_BASE = 263,
+ DT_BYTE = 264,
+ DT_STRING = 265,
+ DT_LABEL = 266,
+ DT_REF = 267,
+ DT_INCBIN = 268
+ };
+#endif
+/* Tokens. */
+#define DT_V1 258
+#define DT_MEMRESERVE 259
+#define DT_PROPNODENAME 260
+#define DT_LITERAL 261
+#define DT_LEGACYLITERAL 262
+#define DT_BASE 263
+#define DT_BYTE 264
+#define DT_STRING 265
+#define DT_LABEL 266
+#define DT_REF 267
+#define DT_INCBIN 268
+
+
+
+
+/* Copy the first part of user declarations. */
+#line 23 "dtc-parser.y"
+
+#include <stdio.h>
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern int yylex(void);
+
+extern struct boot_info *the_boot_info;
+extern int treesource_error;
+
+static unsigned long long eval_literal(const char *s, int base, int bits);
+
+
+/* Enabling traces. */
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+
+/* Enabling verbose error messages. */
+#ifdef YYERROR_VERBOSE
+# undef YYERROR_VERBOSE
+# define YYERROR_VERBOSE 1
+#else
+# define YYERROR_VERBOSE 0
+#endif
+
+/* Enabling the token table. */
+#ifndef YYTOKEN_TABLE
+# define YYTOKEN_TABLE 0
+#endif
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+#line 37 "dtc-parser.y"
+{
+ char *propnodename;
+ char *literal;
+ char *labelref;
+ unsigned int cbase;
+ uint8_t byte;
+ struct data data;
+
+ uint64_t addr;
+ cell_t cell;
+ struct property *prop;
+ struct property *proplist;
+ struct node *node;
+ struct node *nodelist;
+ struct reserve_info *re;
+}
+/* Line 187 of yacc.c. */
+#line 153 "dtc-parser.tab.c"
+ YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
+typedef struct YYLTYPE
+{
+ int first_line;
+ int first_column;
+ int last_line;
+ int last_column;
+} YYLTYPE;
+# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
+# define YYLTYPE_IS_DECLARED 1
+# define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+
+/* Copy the second part of user declarations. */
+
+
+/* Line 216 of yacc.c. */
+#line 178 "dtc-parser.tab.c"
+
+#ifdef short
+# undef short
+#endif
+
+#ifdef YYTYPE_UINT8
+typedef YYTYPE_UINT8 yytype_uint8;
+#else
+typedef unsigned char yytype_uint8;
+#endif
+
+#ifdef YYTYPE_INT8
+typedef YYTYPE_INT8 yytype_int8;
+#elif (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+typedef signed char yytype_int8;
+#else
+typedef short int yytype_int8;
+#endif
+
+#ifdef YYTYPE_UINT16
+typedef YYTYPE_UINT16 yytype_uint16;
+#else
+typedef unsigned short int yytype_uint16;
+#endif
+
+#ifdef YYTYPE_INT16
+typedef YYTYPE_INT16 yytype_int16;
+#else
+typedef short int yytype_int16;
+#endif
+
+#ifndef YYSIZE_T
+# ifdef __SIZE_TYPE__
+# define YYSIZE_T __SIZE_TYPE__
+# elif defined size_t
+# define YYSIZE_T size_t
+# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+# define YYSIZE_T size_t
+# else
+# define YYSIZE_T unsigned int
+# endif
+#endif
+
+#define YYSIZE_MAXIMUM ((YYSIZE_T) -1)
+
+#ifndef YY_
+# if YYENABLE_NLS
+# if ENABLE_NLS
+# include <libintl.h> /* INFRINGES ON USER NAME SPACE */
+# define YY_(msgid) dgettext ("bison-runtime", msgid)
+# endif
+# endif
+# ifndef YY_
+# define YY_(msgid) msgid
+# endif
+#endif
+
+/* Suppress unused-variable warnings by "using" E. */
+#if ! defined lint || defined __GNUC__
+# define YYUSE(e) ((void) (e))
+#else
+# define YYUSE(e) /* empty */
+#endif
+
+/* Identity function, used to suppress warnings about constant conditions. */
+#ifndef lint
+# define YYID(n) (n)
+#else
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static int
+YYID (int i)
+#else
+static int
+YYID (i)
+ int i;
+#endif
+{
+ return i;
+}
+#endif
+
+#if ! defined yyoverflow || YYERROR_VERBOSE
+
+/* The parser invokes alloca or malloc; define the necessary symbols. */
+
+# ifdef YYSTACK_USE_ALLOCA
+# if YYSTACK_USE_ALLOCA
+# ifdef __GNUC__
+# define YYSTACK_ALLOC __builtin_alloca
+# elif defined __BUILTIN_VA_ARG_INCR
+# include <alloca.h> /* INFRINGES ON USER NAME SPACE */
+# elif defined _AIX
+# define YYSTACK_ALLOC __alloca
+# elif defined _MSC_VER
+# include <malloc.h> /* INFRINGES ON USER NAME SPACE */
+# define alloca _alloca
+# else
+# define YYSTACK_ALLOC alloca
+# if ! defined _ALLOCA_H && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# ifndef _STDLIB_H
+# define _STDLIB_H 1
+# endif
+# endif
+# endif
+# endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+ /* Pacify GCC's `empty if-body' warning. */
+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0))
+# ifndef YYSTACK_ALLOC_MAXIMUM
+ /* The OS might guarantee only one guard page at the bottom of the stack,
+ and a page size can be as small as 4096 bytes. So we cannot safely
+ invoke alloca (N) if N exceeds 4096. Use a slightly smaller number
+ to allow for a few compiler-allocated temporary stack slots. */
+# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */
+# endif
+# else
+# define YYSTACK_ALLOC YYMALLOC
+# define YYSTACK_FREE YYFREE
+# ifndef YYSTACK_ALLOC_MAXIMUM
+# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM
+# endif
+# if (defined __cplusplus && ! defined _STDLIB_H \
+ && ! ((defined YYMALLOC || defined malloc) \
+ && (defined YYFREE || defined free)))
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# ifndef _STDLIB_H
+# define _STDLIB_H 1
+# endif
+# endif
+# ifndef YYMALLOC
+# define YYMALLOC malloc
+# if ! defined malloc && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */
+# endif
+# endif
+# ifndef YYFREE
+# define YYFREE free
+# if ! defined free && ! defined _STDLIB_H && (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+void free (void *); /* INFRINGES ON USER NAME SPACE */
+# endif
+# endif
+# endif
+#endif /* ! defined yyoverflow || YYERROR_VERBOSE */
+
+
+#if (! defined yyoverflow \
+ && (! defined __cplusplus \
+ || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
+ && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member. */
+union yyalloc
+{
+ yytype_int16 yyss;
+ YYSTYPE yyvs;
+ YYLTYPE yyls;
+};
+
+/* The size of the maximum gap between one aligned stack and the next. */
+# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+ N elements. */
+# define YYSTACK_BYTES(N) \
+ ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
+ + 2 * YYSTACK_GAP_MAXIMUM)
+
+/* Copy COUNT objects from FROM to TO. The source and destination do
+ not overlap. */
+# ifndef YYCOPY
+# if defined __GNUC__ && 1 < __GNUC__
+# define YYCOPY(To, From, Count) \
+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+# else
+# define YYCOPY(To, From, Count) \
+ do \
+ { \
+ YYSIZE_T yyi; \
+ for (yyi = 0; yyi < (Count); yyi++) \
+ (To)[yyi] = (From)[yyi]; \
+ } \
+ while (YYID (0))
+# endif
+# endif
+
+/* Relocate STACK from its old location to the new one. The
+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
+ elements in the stack, and YYPTR gives the new location of the
+ stack. Advance YYPTR to a properly aligned location for the next
+ stack. */
+# define YYSTACK_RELOCATE(Stack) \
+ do \
+ { \
+ YYSIZE_T yynewbytes; \
+ YYCOPY (&yyptr->Stack, Stack, yysize); \
+ Stack = &yyptr->Stack; \
+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
+ yyptr += yynewbytes / sizeof (*yyptr); \
+ } \
+ while (YYID (0))
+
+#endif
+
+/* YYFINAL -- State number of the termination state. */
+#define YYFINAL 9
+/* YYLAST -- Last index in YYTABLE. */
+#define YYLAST 73
+
+/* YYNTOKENS -- Number of terminals. */
+#define YYNTOKENS 27
+/* YYNNTS -- Number of nonterminals. */
+#define YYNNTS 20
+/* YYNRULES -- Number of rules. */
+#define YYNRULES 45
+/* YYNRULES -- Number of states. */
+#define YYNSTATES 76
+
+/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
+#define YYUNDEFTOK 2
+#define YYMAXUTOK 268
+
+#define YYTRANSLATE(YYX) \
+ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
+
+/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
+static const yytype_uint8 yytranslate[] =
+{
+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 24, 26, 2, 2, 25, 15, 2, 16, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 14,
+ 20, 19, 21, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 22, 2, 23, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 17, 2, 18, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
+ 5, 6, 7, 8, 9, 10, 11, 12, 13
+};
+
+#if YYDEBUG
+/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
+ YYRHS. */
+static const yytype_uint8 yyprhs[] =
+{
+ 0, 0, 3, 8, 11, 12, 15, 21, 22, 25,
+ 27, 34, 36, 38, 41, 47, 48, 51, 57, 61,
+ 64, 69, 74, 77, 87, 93, 96, 97, 100, 103,
+ 104, 107, 110, 113, 114, 116, 118, 121, 122, 125,
+ 128, 129, 132, 135, 139, 140
+};
+
+/* YYRHS -- A `-1'-separated list of the rules' RHS. */
+static const yytype_int8 yyrhs[] =
+{
+ 28, 0, -1, 3, 14, 29, 34, -1, 31, 34,
+ -1, -1, 30, 29, -1, 46, 4, 33, 33, 14,
+ -1, -1, 32, 31, -1, 30, -1, 46, 4, 33,
+ 15, 33, 14, -1, 6, -1, 7, -1, 16, 35,
+ -1, 17, 36, 44, 18, 14, -1, -1, 36, 37,
+ -1, 46, 5, 19, 38, 14, -1, 46, 5, 14,
+ -1, 39, 10, -1, 39, 20, 40, 21, -1, 39,
+ 22, 43, 23, -1, 39, 12, -1, 39, 13, 24,
+ 10, 25, 33, 25, 33, 26, -1, 39, 13, 24,
+ 10, 26, -1, 38, 11, -1, -1, 38, 25, -1,
+ 39, 11, -1, -1, 40, 42, -1, 40, 12, -1,
+ 40, 11, -1, -1, 8, -1, 6, -1, 41, 7,
+ -1, -1, 43, 9, -1, 43, 11, -1, -1, 45,
+ 44, -1, 45, 37, -1, 46, 5, 35, -1, -1,
+ 11, -1
+};
+
+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
+static const yytype_uint16 yyrline[] =
+{
+ 0, 89, 89, 93, 101, 104, 111, 119, 122, 129,
+ 133, 140, 144, 151, 158, 166, 169, 176, 180, 187,
+ 191, 195, 199, 203, 220, 231, 239, 242, 246, 254,
+ 257, 261, 266, 274, 277, 281, 285, 293, 296, 300,
+ 308, 311, 315, 323, 331, 334
+};
+#endif
+
+#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE
+/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
+ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
+static const char *const yytname[] =
+{
+ "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
+ "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
+ "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
+ "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
+ "')'", "$accept", "sourcefile", "memreserves", "memreserve",
+ "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
+ "proplist", "propdef", "propdata", "propdataprefix", "celllist",
+ "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
+};
+#endif
+
+# ifdef YYPRINT
+/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
+ token YYLEX-NUM. */
+static const yytype_uint16 yytoknum[] =
+{
+ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
+ 265, 266, 267, 268, 59, 45, 47, 123, 125, 61,
+ 60, 62, 91, 93, 40, 44, 41
+};
+# endif
+
+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
+static const yytype_uint8 yyr1[] =
+{
+ 0, 27, 28, 28, 29, 29, 30, 31, 31, 32,
+ 32, 33, 33, 34, 35, 36, 36, 37, 37, 38,
+ 38, 38, 38, 38, 38, 38, 39, 39, 39, 40,
+ 40, 40, 40, 41, 41, 42, 42, 43, 43, 43,
+ 44, 44, 44, 45, 46, 46
+};
+
+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
+static const yytype_uint8 yyr2[] =
+{
+ 0, 2, 4, 2, 0, 2, 5, 0, 2, 1,
+ 6, 1, 1, 2, 5, 0, 2, 5, 3, 2,
+ 4, 4, 2, 9, 5, 2, 0, 2, 2, 0,
+ 2, 2, 2, 0, 1, 1, 2, 0, 2, 2,
+ 0, 2, 2, 3, 0, 1
+};
+
+/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
+ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
+ means the default is an error. */
+static const yytype_uint8 yydefact[] =
+{
+ 7, 0, 45, 0, 9, 0, 7, 0, 4, 1,
+ 0, 3, 8, 0, 0, 4, 0, 15, 13, 11,
+ 12, 0, 2, 5, 0, 40, 0, 0, 0, 16,
+ 0, 40, 0, 0, 6, 0, 42, 41, 0, 10,
+ 14, 18, 26, 43, 0, 0, 25, 17, 27, 19,
+ 28, 22, 0, 29, 37, 0, 33, 0, 0, 35,
+ 34, 32, 31, 20, 0, 30, 38, 39, 21, 0,
+ 24, 36, 0, 0, 0, 23
+};
+
+/* YYDEFGOTO[NTERM-NUM]. */
+static const yytype_int8 yydefgoto[] =
+{
+ -1, 3, 14, 4, 5, 6, 27, 11, 18, 25,
+ 29, 44, 45, 56, 64, 65, 57, 30, 31, 7
+};
+
+/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
+ STATE-NUM. */
+#define YYPACT_NINF -14
+static const yytype_int8 yypact[] =
+{
+ 30, -11, -14, 7, -14, -1, 27, 13, 27, -14,
+ 8, -14, -14, 40, -1, 27, 35, -14, -14, -14,
+ -14, 21, -14, -14, 40, 24, 40, 28, 40, -14,
+ 32, 24, 46, 38, -14, 39, -14, -14, 26, -14,
+ -14, -14, -14, -14, -9, 10, -14, -14, -14, -14,
+ -14, -14, 31, -14, -14, 44, -2, 3, 23, -14,
+ -14, -14, -14, -14, 50, -14, -14, -14, -14, 40,
+ -14, -14, 33, 40, 36, -14
+};
+
+/* YYPGOTO[NTERM-NUM]. */
+static const yytype_int8 yypgoto[] =
+{
+ -14, -14, 48, 29, 53, -14, -13, 47, 34, -14,
+ 37, -14, -14, -14, -14, -14, -14, 42, -14, -7
+};
+
+/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
+ positive, shift that token. If negative, reduce the rule which
+ number is the opposite. If zero, do what YYDEFACT says.
+ If YYTABLE_NINF, syntax error. */
+#define YYTABLE_NINF -45
+static const yytype_int8 yytable[] =
+{
+ 21, 16, 46, 8, 59, 47, 60, 9, 16, 61,
+ 62, 28, 66, 33, 67, 10, 48, 13, 32, 63,
+ 49, 50, 51, 52, 32, 17, 68, 19, 20, -44,
+ 53, -44, 54, 1, -44, 2, 26, 15, 2, 24,
+ 41, 2, 34, 17, 15, 42, 19, 20, 69, 70,
+ 35, 38, 39, 40, 58, 55, 72, 71, 73, 12,
+ 74, 22, 75, 23, 0, 0, 0, 0, 36, 0,
+ 0, 0, 43, 37
+};
+
+static const yytype_int8 yycheck[] =
+{
+ 13, 8, 11, 14, 6, 14, 8, 0, 15, 11,
+ 12, 24, 9, 26, 11, 16, 25, 4, 25, 21,
+ 10, 11, 12, 13, 31, 17, 23, 6, 7, 5,
+ 20, 4, 22, 3, 4, 11, 15, 8, 11, 4,
+ 14, 11, 14, 17, 15, 19, 6, 7, 25, 26,
+ 18, 5, 14, 14, 10, 24, 69, 7, 25, 6,
+ 73, 14, 26, 15, -1, -1, -1, -1, 31, -1,
+ -1, -1, 38, 31
+};
+
+/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
+ symbol of state STATE-NUM. */
+static const yytype_uint8 yystos[] =
+{
+ 0, 3, 11, 28, 30, 31, 32, 46, 14, 0,
+ 16, 34, 31, 4, 29, 30, 46, 17, 35, 6,
+ 7, 33, 34, 29, 4, 36, 15, 33, 33, 37,
+ 44, 45, 46, 33, 14, 18, 37, 44, 5, 14,
+ 14, 14, 19, 35, 38, 39, 11, 14, 25, 10,
+ 11, 12, 13, 20, 22, 24, 40, 43, 10, 6,
+ 8, 11, 12, 21, 41, 42, 9, 11, 23, 25,
+ 26, 7, 33, 25, 33, 26
+};
+
+#define yyerrok (yyerrstatus = 0)
+#define yyclearin (yychar = YYEMPTY)
+#define YYEMPTY (-2)
+#define YYEOF 0
+
+#define YYACCEPT goto yyacceptlab
+#define YYABORT goto yyabortlab
+#define YYERROR goto yyerrorlab
+
+
+/* Like YYERROR except do call yyerror. This remains here temporarily
+ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
+
+#define YYFAIL goto yyerrlab
+
+#define YYRECOVERING() (!!yyerrstatus)
+
+#define YYBACKUP(Token, Value) \
+do \
+ if (yychar == YYEMPTY && yylen == 1) \
+ { \
+ yychar = (Token); \
+ yylval = (Value); \
+ yytoken = YYTRANSLATE (yychar); \
+ YYPOPSTACK (1); \
+ goto yybackup; \
+ } \
+ else \
+ { \
+ yyerror (YY_("syntax error: cannot back up")); \
+ YYERROR; \
+ } \
+while (YYID (0))
+
+
+#define YYTERROR 1
+#define YYERRCODE 256
+
+
+/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N].
+ If N is 0, then set CURRENT to the empty location which ends
+ the previous symbol: RHS[0] (always defined). */
+
+#define YYRHSLOC(Rhs, K) ((Rhs)[K])
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (YYID (N)) \
+ { \
+ (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
+ (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
+ (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
+ (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
+ } \
+ else \
+ { \
+ (Current).first_line = (Current).last_line = \
+ YYRHSLOC (Rhs, 0).last_line; \
+ (Current).first_column = (Current).last_column = \
+ YYRHSLOC (Rhs, 0).last_column; \
+ } \
+ while (YYID (0))
+#endif
+
+
+/* YY_LOCATION_PRINT -- Print the location on the stream.
+ This macro was not mandated originally: define only if we know
+ we won't break user code: when these are the locations we know. */
+
+#ifndef YY_LOCATION_PRINT
+# if YYLTYPE_IS_TRIVIAL
+# define YY_LOCATION_PRINT(File, Loc) \
+ fprintf (File, "%d.%d-%d.%d", \
+ (Loc).first_line, (Loc).first_column, \
+ (Loc).last_line, (Loc).last_column)
+# else
+# define YY_LOCATION_PRINT(File, Loc) ((void) 0)
+# endif
+#endif
+
+
+/* YYLEX -- calling `yylex' with the right arguments. */
+
+#ifdef YYLEX_PARAM
+# define YYLEX yylex (YYLEX_PARAM)
+#else
+# define YYLEX yylex ()
+#endif
+
+/* Enable debugging if requested. */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+# define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args) \
+do { \
+ if (yydebug) \
+ YYFPRINTF Args; \
+} while (YYID (0))
+
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \
+do { \
+ if (yydebug) \
+ { \
+ YYFPRINTF (stderr, "%s ", Title); \
+ yy_symbol_print (stderr, \
+ Type, Value, Location); \
+ YYFPRINTF (stderr, "\n"); \
+ } \
+} while (YYID (0))
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT. |
+`--------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+#else
+static void
+yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
+ FILE *yyoutput;
+ int yytype;
+ YYSTYPE const * const yyvaluep;
+ YYLTYPE const * const yylocationp;
+#endif
+{
+ if (!yyvaluep)
+ return;
+ YYUSE (yylocationp);
+# ifdef YYPRINT
+ if (yytype < YYNTOKENS)
+ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
+# else
+ YYUSE (yyoutput);
+# endif
+ switch (yytype)
+ {
+ default:
+ break;
+ }
+}
+
+
+/*--------------------------------.
+| Print this symbol on YYOUTPUT. |
+`--------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+#else
+static void
+yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
+ FILE *yyoutput;
+ int yytype;
+ YYSTYPE const * const yyvaluep;
+ YYLTYPE const * const yylocationp;
+#endif
+{
+ if (yytype < YYNTOKENS)
+ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
+ else
+ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+ YY_LOCATION_PRINT (yyoutput, *yylocationp);
+ YYFPRINTF (yyoutput, ": ");
+ yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
+ YYFPRINTF (yyoutput, ")");
+}
+
+/*------------------------------------------------------------------.
+| yy_stack_print -- Print the state stack from its BOTTOM up to its |
+| TOP (included). |
+`------------------------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+#else
+static void
+yy_stack_print (bottom, top)
+ yytype_int16 *bottom;
+ yytype_int16 *top;
+#endif
+{
+ YYFPRINTF (stderr, "Stack now");
+ for (; bottom <= top; ++bottom)
+ YYFPRINTF (stderr, " %d", *bottom);
+ YYFPRINTF (stderr, "\n");
+}
+
+# define YY_STACK_PRINT(Bottom, Top) \
+do { \
+ if (yydebug) \
+ yy_stack_print ((Bottom), (Top)); \
+} while (YYID (0))
+
+
+/*------------------------------------------------.
+| Report that the YYRULE is going to be reduced. |
+`------------------------------------------------*/
+
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
+#else
+static void
+yy_reduce_print (yyvsp, yylsp, yyrule)
+ YYSTYPE *yyvsp;
+ YYLTYPE *yylsp;
+ int yyrule;
+#endif
+{
+ int yynrhs = yyr2[yyrule];
+ int yyi;
+ unsigned long int yylno = yyrline[yyrule];
+ YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n",
+ yyrule - 1, yylno);
+ /* The symbols being reduced. */
+ for (yyi = 0; yyi < yynrhs; yyi++)
+ {
+ fprintf (stderr, " $%d = ", yyi + 1);
+ yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
+ &(yyvsp[(yyi + 1) - (yynrhs)])
+ , &(yylsp[(yyi + 1) - (yynrhs)]) );
+ fprintf (stderr, "\n");
+ }
+}
+
+# define YY_REDUCE_PRINT(Rule) \
+do { \
+ if (yydebug) \
+ yy_reduce_print (yyvsp, yylsp, Rule); \
+} while (YYID (0))
+
+/* Nonzero means print parse trace. It is left uninitialized so that
+ multiple parsers can coexist. */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args)
+# define YY_SYMBOL_PRINT(Title, Type, Value, Location)
+# define YY_STACK_PRINT(Bottom, Top)
+# define YY_REDUCE_PRINT(Rule)
+#endif /* !YYDEBUG */
+
+
+/* YYINITDEPTH -- initial size of the parser's stacks. */
+#ifndef YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+ if the built-in stack extension method is used).
+
+ Do not make this value too large; the results are undefined if
+ YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH)
+ evaluated with infinite-precision integer arithmetic. */
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+
+\f
+
+#if YYERROR_VERBOSE
+
+# ifndef yystrlen
+# if defined __GLIBC__ && defined _STRING_H
+# define yystrlen strlen
+# else
+/* Return the length of YYSTR. */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static YYSIZE_T
+yystrlen (const char *yystr)
+#else
+static YYSIZE_T
+yystrlen (yystr)
+ const char *yystr;
+#endif
+{
+ YYSIZE_T yylen;
+ for (yylen = 0; yystr[yylen]; yylen++)
+ continue;
+ return yylen;
+}
+# endif
+# endif
+
+# ifndef yystpcpy
+# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE
+# define yystpcpy stpcpy
+# else
+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
+ YYDEST. */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static char *
+yystpcpy (char *yydest, const char *yysrc)
+#else
+static char *
+yystpcpy (yydest, yysrc)
+ char *yydest;
+ const char *yysrc;
+#endif
+{
+ char *yyd = yydest;
+ const char *yys = yysrc;
+
+ while ((*yyd++ = *yys++) != '\0')
+ continue;
+
+ return yyd - 1;
+}
+# endif
+# endif
+
+# ifndef yytnamerr
+/* Copy to YYRES the contents of YYSTR after stripping away unnecessary
+ quotes and backslashes, so that it's suitable for yyerror. The
+ heuristic is that double-quoting is unnecessary unless the string
+ contains an apostrophe, a comma, or backslash (other than
+ backslash-backslash). YYSTR is taken from yytname. If YYRES is
+ null, do not copy; instead, return the length of what the result
+ would have been. */
+static YYSIZE_T
+yytnamerr (char *yyres, const char *yystr)
+{
+ if (*yystr == '"')
+ {
+ YYSIZE_T yyn = 0;
+ char const *yyp = yystr;
+
+ for (;;)
+ switch (*++yyp)
+ {
+ case '\'':
+ case ',':
+ goto do_not_strip_quotes;
+
+ case '\\':
+ if (*++yyp != '\\')
+ goto do_not_strip_quotes;
+ /* Fall through. */
+ default:
+ if (yyres)
+ yyres[yyn] = *yyp;
+ yyn++;
+ break;
+
+ case '"':
+ if (yyres)
+ yyres[yyn] = '\0';
+ return yyn;
+ }
+ do_not_strip_quotes: ;
+ }
+
+ if (! yyres)
+ return yystrlen (yystr);
+
+ return yystpcpy (yyres, yystr) - yyres;
+}
+# endif
+
+/* Copy into YYRESULT an error message about the unexpected token
+ YYCHAR while in state YYSTATE. Return the number of bytes copied,
+ including the terminating null byte. If YYRESULT is null, do not
+ copy anything; just return the number of bytes that would be
+ copied. As a special case, return 0 if an ordinary "syntax error"
+ message will do. Return YYSIZE_MAXIMUM if overflow occurs during
+ size calculation. */
+static YYSIZE_T
+yysyntax_error (char *yyresult, int yystate, int yychar)
+{
+ int yyn = yypact[yystate];
+
+ if (! (YYPACT_NINF < yyn && yyn <= YYLAST))
+ return 0;
+ else
+ {
+ int yytype = YYTRANSLATE (yychar);
+ YYSIZE_T yysize0 = yytnamerr (0, yytname[yytype]);
+ YYSIZE_T yysize = yysize0;
+ YYSIZE_T yysize1;
+ int yysize_overflow = 0;
+ enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 };
+ char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM];
+ int yyx;
+
+# if 0
+ /* This is so xgettext sees the translatable formats that are
+ constructed on the fly. */
+ YY_("syntax error, unexpected %s");
+ YY_("syntax error, unexpected %s, expecting %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s or %s");
+ YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s");
+# endif
+ char *yyfmt;
+ char const *yyf;
+ static char const yyunexpected[] = "syntax error, unexpected %s";
+ static char const yyexpecting[] = ", expecting %s";
+ static char const yyor[] = " or %s";
+ char yyformat[sizeof yyunexpected
+ + sizeof yyexpecting - 1
+ + ((YYERROR_VERBOSE_ARGS_MAXIMUM - 2)
+ * (sizeof yyor - 1))];
+ char const *yyprefix = yyexpecting;
+
+ /* Start YYX at -YYN if negative to avoid negative indexes in
+ YYCHECK. */
+ int yyxbegin = yyn < 0 ? -yyn : 0;
+
+ /* Stay within bounds of both yycheck and yytname. */
+ int yychecklim = YYLAST - yyn + 1;
+ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
+ int yycount = 1;
+
+ yyarg[0] = yytname[yytype];
+ yyfmt = yystpcpy (yyformat, yyunexpected);
+
+ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
+ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+ {
+ if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM)
+ {
+ yycount = 1;
+ yysize = yysize0;
+ yyformat[sizeof yyunexpected - 1] = '\0';
+ break;
+ }
+ yyarg[yycount++] = yytname[yyx];
+ yysize1 = yysize + yytnamerr (0, yytname[yyx]);
+ yysize_overflow |= (yysize1 < yysize);
+ yysize = yysize1;
+ yyfmt = yystpcpy (yyfmt, yyprefix);
+ yyprefix = yyor;
+ }
+
+ yyf = YY_(yyformat);
+ yysize1 = yysize + yystrlen (yyf);
+ yysize_overflow |= (yysize1 < yysize);
+ yysize = yysize1;
+
+ if (yysize_overflow)
+ return YYSIZE_MAXIMUM;
+
+ if (yyresult)
+ {
+ /* Avoid sprintf, as that infringes on the user's name space.
+ Don't have undefined behavior even if the translation
+ produced a string with the wrong number of "%s"s. */
+ char *yyp = yyresult;
+ int yyi = 0;
+ while ((*yyp = *yyf) != '\0')
+ {
+ if (*yyp == '%' && yyf[1] == 's' && yyi < yycount)
+ {
+ yyp += yytnamerr (yyp, yyarg[yyi++]);
+ yyf += 2;
+ }
+ else
+ {
+ yyp++;
+ yyf++;
+ }
+ }
+ }
+ return yysize;
+ }
+}
+#endif /* YYERROR_VERBOSE */
+\f
+
+/*-----------------------------------------------.
+| Release the memory associated to this symbol. |
+`-----------------------------------------------*/
+
+/*ARGSUSED*/
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+static void
+yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
+#else
+static void
+yydestruct (yymsg, yytype, yyvaluep, yylocationp)
+ const char *yymsg;
+ int yytype;
+ YYSTYPE *yyvaluep;
+ YYLTYPE *yylocationp;
+#endif
+{
+ YYUSE (yyvaluep);
+ YYUSE (yylocationp);
+
+ if (!yymsg)
+ yymsg = "Deleting";
+ YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp);
+
+ switch (yytype)
+ {
+
+ default:
+ break;
+ }
+}
+\f
+
+/* Prevent warnings from -Wmissing-prototypes. */
+
+#ifdef YYPARSE_PARAM
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void *YYPARSE_PARAM);
+#else
+int yyparse ();
+#endif
+#else /* ! YYPARSE_PARAM */
+#if defined __STDC__ || defined __cplusplus
+int yyparse (void);
+#else
+int yyparse ();
+#endif
+#endif /* ! YYPARSE_PARAM */
+
+
+
+/* The look-ahead symbol. */
+int yychar;
+
+/* The semantic value of the look-ahead symbol. */
+YYSTYPE yylval;
+
+/* Number of syntax errors so far. */
+int yynerrs;
+/* Location data for the look-ahead symbol. */
+YYLTYPE yylloc;
+
+
+
+/*----------.
+| yyparse. |
+`----------*/
+
+#ifdef YYPARSE_PARAM
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void *YYPARSE_PARAM)
+#else
+int
+yyparse (YYPARSE_PARAM)
+ void *YYPARSE_PARAM;
+#endif
+#else /* ! YYPARSE_PARAM */
+#if (defined __STDC__ || defined __C99__FUNC__ \
+ || defined __cplusplus || defined _MSC_VER)
+int
+yyparse (void)
+#else
+int
+yyparse ()
+
+#endif
+#endif
+{
+
+ int yystate;
+ int yyn;
+ int yyresult;
+ /* Number of tokens to shift before error messages enabled. */
+ int yyerrstatus;
+ /* Look-ahead token as an internal (translated) token number. */
+ int yytoken = 0;
+#if YYERROR_VERBOSE
+ /* Buffer for error messages, and its allocated size. */
+ char yymsgbuf[128];
+ char *yymsg = yymsgbuf;
+ YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+ /* Three stacks and their tools:
+ `yyss': related to states,
+ `yyvs': related to semantic values,
+ `yyls': related to locations.
+
+ Refer to the stacks thru separate pointers, to allow yyoverflow
+ to reallocate them elsewhere. */
+
+ /* The state stack. */
+ yytype_int16 yyssa[YYINITDEPTH];
+ yytype_int16 *yyss = yyssa;
+ yytype_int16 *yyssp;
+
+ /* The semantic value stack. */
+ YYSTYPE yyvsa[YYINITDEPTH];
+ YYSTYPE *yyvs = yyvsa;
+ YYSTYPE *yyvsp;
+
+ /* The location stack. */
+ YYLTYPE yylsa[YYINITDEPTH];
+ YYLTYPE *yyls = yylsa;
+ YYLTYPE *yylsp;
+ /* The locations where the error started and ended. */
+ YYLTYPE yyerror_range[2];
+
+#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
+
+ YYSIZE_T yystacksize = YYINITDEPTH;
+
+ /* The variables used to return semantic value and location from the
+ action routines. */
+ YYSTYPE yyval;
+ YYLTYPE yyloc;
+
+ /* The number of symbols on the RHS of the reduced rule.
+ Keep to zero when no symbol should be popped. */
+ int yylen = 0;
+
+ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+ yynerrs = 0;
+ yychar = YYEMPTY; /* Cause a token to be read. */
+
+ /* Initialize stack pointers.
+ Waste one element of value and location stack
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+ yyssp = yyss;
+ yyvsp = yyvs;
+ yylsp = yyls;
+#if YYLTYPE_IS_TRIVIAL
+ /* Initialize the default location before parsing starts. */
+ yylloc.first_line = yylloc.last_line = 1;
+ yylloc.first_column = yylloc.last_column = 0;
+#endif
+
+ goto yysetstate;
+
+/*------------------------------------------------------------.
+| yynewstate -- Push a new state, which is found in yystate. |
+`------------------------------------------------------------*/
+ yynewstate:
+ /* In all cases, when you get here, the value and location stacks
+ have just been pushed. So pushing a state here evens the stacks. */
+ yyssp++;
+
+ yysetstate:
+ *yyssp = yystate;
+
+ if (yyss + yystacksize - 1 <= yyssp)
+ {
+ /* Get the current used size of the three stacks, in elements. */
+ YYSIZE_T yysize = yyssp - yyss + 1;
+
+#ifdef yyoverflow
+ {
+ /* Give user a chance to reallocate the stack. Use copies of
+ these so that the &'s don't force the real ones into
+ memory. */
+ YYSTYPE *yyvs1 = yyvs;
+ yytype_int16 *yyss1 = yyss;
+ YYLTYPE *yyls1 = yyls;
+
+ /* Each stack pointer address is followed by the size of the
+ data in use in that stack, in bytes. This used to be a
+ conditional around just the two extra args, but that might
+ be undefined if yyoverflow is a macro. */
+ yyoverflow (YY_("memory exhausted"),
+ &yyss1, yysize * sizeof (*yyssp),
+ &yyvs1, yysize * sizeof (*yyvsp),
+ &yyls1, yysize * sizeof (*yylsp),
+ &yystacksize);
+ yyls = yyls1;
+ yyss = yyss1;
+ yyvs = yyvs1;
+ }
+#else /* no yyoverflow */
+# ifndef YYSTACK_RELOCATE
+ goto yyexhaustedlab;
+# else
+ /* Extend the stack our own way. */
+ if (YYMAXDEPTH <= yystacksize)
+ goto yyexhaustedlab;
+ yystacksize *= 2;
+ if (YYMAXDEPTH < yystacksize)
+ yystacksize = YYMAXDEPTH;
+
+ {
+ yytype_int16 *yyss1 = yyss;
+ union yyalloc *yyptr =
+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
+ if (! yyptr)
+ goto yyexhaustedlab;
+ YYSTACK_RELOCATE (yyss);
+ YYSTACK_RELOCATE (yyvs);
+ YYSTACK_RELOCATE (yyls);
+# undef YYSTACK_RELOCATE
+ if (yyss1 != yyssa)
+ YYSTACK_FREE (yyss1);
+ }
+# endif
+#endif /* no yyoverflow */
+
+ yyssp = yyss + yysize - 1;
+ yyvsp = yyvs + yysize - 1;
+ yylsp = yyls + yysize - 1;
+
+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
+ (unsigned long int) yystacksize));
+
+ if (yyss + yystacksize - 1 <= yyssp)
+ YYABORT;
+ }
+
+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+
+/*-----------.
+| yybackup. |
+`-----------*/
+yybackup:
+
+ /* Do appropriate processing given the current state. Read a
+ look-ahead token if we need one and don't already have one. */
+
+ /* First try to decide what to do without reference to look-ahead token. */
+ yyn = yypact[yystate];
+ if (yyn == YYPACT_NINF)
+ goto yydefault;
+
+ /* Not known => get a look-ahead token if don't already have one. */
+
+ /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */
+ if (yychar == YYEMPTY)
+ {
+ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+ if (yychar <= YYEOF)
+ {
+ yychar = yytoken = YYEOF;
+ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+ yytoken = YYTRANSLATE (yychar);
+ YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc);
+ }
+
+ /* If the proper action on seeing token YYTOKEN is to reduce or to
+ detect an error, take that action. */
+ yyn += yytoken;
+ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+ goto yydefault;
+ yyn = yytable[yyn];
+ if (yyn <= 0)
+ {
+ if (yyn == 0 || yyn == YYTABLE_NINF)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Count tokens shifted since error; after three, turn off error
+ status. */
+ if (yyerrstatus)
+ yyerrstatus--;
+
+ /* Shift the look-ahead token. */
+ YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
+
+ /* Discard the shifted token unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ yystate = yyn;
+ *++yyvsp = yylval;
+ *++yylsp = yylloc;
+ goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state. |
+`-----------------------------------------------------------*/
+yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
+ goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- Do a reduction. |
+`-----------------------------*/
+yyreduce:
+ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+
+ /* If YYLEN is nonzero, implement the default value of the action:
+ `$$ = $1'.
+
+ Otherwise, the following line sets YYVAL to garbage.
+ This behavior is undocumented and Bison
+ users should not rely upon it. Assigning to YYVAL
+ unconditionally makes the parser a bit smaller, and it avoids a
+ GCC warning that YYVAL may be used uninitialized. */
+ yyval = yyvsp[1-yylen];
+
+ /* Default location. */
+ YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
+ YY_REDUCE_PRINT (yyn);
+ switch (yyn)
+ {
+ case 2:
+#line 90 "dtc-parser.y"
+ {
+ the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
+ ;}
+ break;
+
+ case 3:
+#line 94 "dtc-parser.y"
+ {
+ the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
+ ;}
+ break;
+
+ case 4:
+#line 101 "dtc-parser.y"
+ {
+ (yyval.re) = NULL;
+ ;}
+ break;
+
+ case 5:
+#line 105 "dtc-parser.y"
+ {
+ (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+ ;}
+ break;
+
+ case 6:
+#line 112 "dtc-parser.y"
+ {
+ (yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
+ ;}
+ break;
+
+ case 7:
+#line 119 "dtc-parser.y"
+ {
+ (yyval.re) = NULL;
+ ;}
+ break;
+
+ case 8:
+#line 123 "dtc-parser.y"
+ {
+ (yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+ ;}
+ break;
+
+ case 9:
+#line 130 "dtc-parser.y"
+ {
+ (yyval.re) = (yyvsp[(1) - (1)].re);
+ ;}
+ break;
+
+ case 10:
+#line 134 "dtc-parser.y"
+ {
+ (yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
+ ;}
+ break;
+
+ case 11:
+#line 141 "dtc-parser.y"
+ {
+ (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
+ ;}
+ break;
+
+ case 12:
+#line 145 "dtc-parser.y"
+ {
+ (yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
+ ;}
+ break;
+
+ case 13:
+#line 152 "dtc-parser.y"
+ {
+ (yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
+ ;}
+ break;
+
+ case 14:
+#line 159 "dtc-parser.y"
+ {
+ (yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
+ ;}
+ break;
+
+ case 15:
+#line 166 "dtc-parser.y"
+ {
+ (yyval.proplist) = NULL;
+ ;}
+ break;
+
+ case 16:
+#line 170 "dtc-parser.y"
+ {
+ (yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
+ ;}
+ break;
+
+ case 17:
+#line 177 "dtc-parser.y"
+ {
+ (yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
+ ;}
+ break;
+
+ case 18:
+#line 181 "dtc-parser.y"
+ {
+ (yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
+ ;}
+ break;
+
+ case 19:
+#line 188 "dtc-parser.y"
+ {
+ (yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
+ ;}
+ break;
+
+ case 20:
+#line 192 "dtc-parser.y"
+ {
+ (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+ ;}
+ break;
+
+ case 21:
+#line 196 "dtc-parser.y"
+ {
+ (yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+ ;}
+ break;
+
+ case 22:
+#line 200 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 23:
+#line 204 "dtc-parser.y"
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
+ struct data d = empty_data;
+
+ if ((yyvsp[(6) - (9)].addr) != 0)
+ if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
+ yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+ (unsigned long long)(yyvsp[(6) - (9)].addr),
+ (yyvsp[(4) - (9)].data).val, strerror(errno));
+
+ d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
+
+ (yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
+ dtc_close_file(file);
+ ;}
+ break;
+
+ case 24:
+#line 221 "dtc-parser.y"
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
+ struct data d = empty_data;
+
+ d = data_copy_file(file->file, -1);
+
+ (yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
+ dtc_close_file(file);
+ ;}
+ break;
+
+ case 25:
+#line 232 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 26:
+#line 239 "dtc-parser.y"
+ {
+ (yyval.data) = empty_data;
+ ;}
+ break;
+
+ case 27:
+#line 243 "dtc-parser.y"
+ {
+ (yyval.data) = (yyvsp[(1) - (2)].data);
+ ;}
+ break;
+
+ case 28:
+#line 247 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 29:
+#line 254 "dtc-parser.y"
+ {
+ (yyval.data) = empty_data;
+ ;}
+ break;
+
+ case 30:
+#line 258 "dtc-parser.y"
+ {
+ (yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
+ ;}
+ break;
+
+ case 31:
+#line 262 "dtc-parser.y"
+ {
+ (yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
+ (yyvsp[(2) - (2)].labelref)), -1);
+ ;}
+ break;
+
+ case 32:
+#line 267 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 33:
+#line 274 "dtc-parser.y"
+ {
+ (yyval.cbase) = 16;
+ ;}
+ break;
+
+ case 35:
+#line 282 "dtc-parser.y"
+ {
+ (yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
+ ;}
+ break;
+
+ case 36:
+#line 286 "dtc-parser.y"
+ {
+ (yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
+ ;}
+ break;
+
+ case 37:
+#line 293 "dtc-parser.y"
+ {
+ (yyval.data) = empty_data;
+ ;}
+ break;
+
+ case 38:
+#line 297 "dtc-parser.y"
+ {
+ (yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
+ ;}
+ break;
+
+ case 39:
+#line 301 "dtc-parser.y"
+ {
+ (yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
+ ;}
+ break;
+
+ case 40:
+#line 308 "dtc-parser.y"
+ {
+ (yyval.nodelist) = NULL;
+ ;}
+ break;
+
+ case 41:
+#line 312 "dtc-parser.y"
+ {
+ (yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
+ ;}
+ break;
+
+ case 42:
+#line 316 "dtc-parser.y"
+ {
+ yyerror("syntax error: properties must precede subnodes");
+ YYERROR;
+ ;}
+ break;
+
+ case 43:
+#line 324 "dtc-parser.y"
+ {
+ (yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
+ ;}
+ break;
+
+ case 44:
+#line 331 "dtc-parser.y"
+ {
+ (yyval.labelref) = NULL;
+ ;}
+ break;
+
+ case 45:
+#line 335 "dtc-parser.y"
+ {
+ (yyval.labelref) = (yyvsp[(1) - (1)].labelref);
+ ;}
+ break;
+
+
+/* Line 1267 of yacc.c. */
+#line 1780 "dtc-parser.tab.c"
+ default: break;
+ }
+ YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
+
+ YYPOPSTACK (yylen);
+ yylen = 0;
+ YY_STACK_PRINT (yyss, yyssp);
+
+ *++yyvsp = yyval;
+ *++yylsp = yyloc;
+
+ /* Now `shift' the result of the reduction. Determine what state
+ that goes to, based on the state we popped back to and the rule
+ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
+ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+ yystate = yydefgoto[yyn - YYNTOKENS];
+
+ goto yynewstate;
+
+
+/*------------------------------------.
+| yyerrlab -- here on detecting error |
+`------------------------------------*/
+yyerrlab:
+ /* If not already recovering from an error, report this error. */
+ if (!yyerrstatus)
+ {
+ ++yynerrs;
+#if ! YYERROR_VERBOSE
+ yyerror (YY_("syntax error"));
+#else
+ {
+ YYSIZE_T yysize = yysyntax_error (0, yystate, yychar);
+ if (yymsg_alloc < yysize && yymsg_alloc < YYSTACK_ALLOC_MAXIMUM)
+ {
+ YYSIZE_T yyalloc = 2 * yysize;
+ if (! (yysize <= yyalloc && yyalloc <= YYSTACK_ALLOC_MAXIMUM))
+ yyalloc = YYSTACK_ALLOC_MAXIMUM;
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+ yymsg = (char *) YYSTACK_ALLOC (yyalloc);
+ if (yymsg)
+ yymsg_alloc = yyalloc;
+ else
+ {
+ yymsg = yymsgbuf;
+ yymsg_alloc = sizeof yymsgbuf;
+ }
+ }
+
+ if (0 < yysize && yysize <= yymsg_alloc)
+ {
+ (void) yysyntax_error (yymsg, yystate, yychar);
+ yyerror (yymsg);
+ }
+ else
+ {
+ yyerror (YY_("syntax error"));
+ if (yysize != 0)
+ goto yyexhaustedlab;
+ }
+ }
+#endif
+ }
+
+ yyerror_range[0] = yylloc;
+
+ if (yyerrstatus == 3)
+ {
+ /* If just tried and failed to reuse look-ahead token after an
+ error, discard it. */
+
+ if (yychar <= YYEOF)
+ {
+ /* Return failure if at end of input. */
+ if (yychar == YYEOF)
+ YYABORT;
+ }
+ else
+ {
+ yydestruct ("Error: discarding",
+ yytoken, &yylval, &yylloc);
+ yychar = YYEMPTY;
+ }
+ }
+
+ /* Else will try to reuse look-ahead token after shifting the error
+ token. */
+ goto yyerrlab1;
+
+
+/*---------------------------------------------------.
+| yyerrorlab -- error raised explicitly by YYERROR. |
+`---------------------------------------------------*/
+yyerrorlab:
+
+ /* Pacify compilers like GCC when the user code never invokes
+ YYERROR and the label yyerrorlab therefore never appears in user
+ code. */
+ if (/*CONSTCOND*/ 0)
+ goto yyerrorlab;
+
+ yyerror_range[0] = yylsp[1-yylen];
+ /* Do not reclaim the symbols of the rule which action triggered
+ this YYERROR. */
+ YYPOPSTACK (yylen);
+ yylen = 0;
+ YY_STACK_PRINT (yyss, yyssp);
+ yystate = *yyssp;
+ goto yyerrlab1;
+
+
+/*-------------------------------------------------------------.
+| yyerrlab1 -- common code for both syntax error and YYERROR. |
+`-------------------------------------------------------------*/
+yyerrlab1:
+ yyerrstatus = 3; /* Each real token shifted decrements this. */
+
+ for (;;)
+ {
+ yyn = yypact[yystate];
+ if (yyn != YYPACT_NINF)
+ {
+ yyn += YYTERROR;
+ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
+ {
+ yyn = yytable[yyn];
+ if (0 < yyn)
+ break;
+ }
+ }
+
+ /* Pop the current state because it cannot handle the error token. */
+ if (yyssp == yyss)
+ YYABORT;
+
+ yyerror_range[0] = *yylsp;
+ yydestruct ("Error: popping",
+ yystos[yystate], yyvsp, yylsp);
+ YYPOPSTACK (1);
+ yystate = *yyssp;
+ YY_STACK_PRINT (yyss, yyssp);
+ }
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ *++yyvsp = yylval;
+
+ yyerror_range[1] = yylloc;
+ /* Using YYLLOC is tempting, but would change the location of
+ the look-ahead. YYLOC is available though. */
+ YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
+ *++yylsp = yyloc;
+
+ /* Shift the error token. */
+ YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
+
+ yystate = yyn;
+ goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here. |
+`-------------------------------------*/
+yyacceptlab:
+ yyresult = 0;
+ goto yyreturn;
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here. |
+`-----------------------------------*/
+yyabortlab:
+ yyresult = 1;
+ goto yyreturn;
+
+#ifndef yyoverflow
+/*-------------------------------------------------.
+| yyexhaustedlab -- memory exhaustion comes here. |
+`-------------------------------------------------*/
+yyexhaustedlab:
+ yyerror (YY_("memory exhausted"));
+ yyresult = 2;
+ /* Fall through. */
+#endif
+
+yyreturn:
+ if (yychar != YYEOF && yychar != YYEMPTY)
+ yydestruct ("Cleanup: discarding lookahead",
+ yytoken, &yylval, &yylloc);
+ /* Do not reclaim the symbols of the rule which action triggered
+ this YYABORT or YYACCEPT. */
+ YYPOPSTACK (yylen);
+ YY_STACK_PRINT (yyss, yyssp);
+ while (yyssp != yyss)
+ {
+ yydestruct ("Cleanup: popping",
+ yystos[*yyssp], yyvsp, yylsp);
+ YYPOPSTACK (1);
+ }
+#ifndef yyoverflow
+ if (yyss != yyssa)
+ YYSTACK_FREE (yyss);
+#endif
+#if YYERROR_VERBOSE
+ if (yymsg != yymsgbuf)
+ YYSTACK_FREE (yymsg);
+#endif
+ /* Make sure YYID is used. */
+ return YYID (yyresult);
+}
+
+
+#line 340 "dtc-parser.y"
+
+
+void yyerrorf(char const *s, ...)
+{
+ const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+ va_list va;
+ va_start(va, s);
+
+ if (strcmp(fname, "-") == 0)
+ fname = "stdin";
+
+ fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+ vfprintf(stderr, s, va);
+ fprintf(stderr, "\n");
+
+ treesource_error = 1;
+ va_end(va);
+}
+
+void yyerror (char const *s)
+{
+ yyerrorf("%s", s);
+}
+
+static unsigned long long eval_literal(const char *s, int base, int bits)
+{
+ unsigned long long val;
+ char *e;
+
+ errno = 0;
+ val = strtoull(s, &e, base);
+ if (*e)
+ yyerror("bad characters in literal");
+ else if ((errno == ERANGE)
+ || ((bits < 64) && (val >= (1ULL << bits))))
+ yyerror("literal out of range");
+ else if (errno != 0)
+ yyerror("bad literal");
+ return val;
+}
+
--- /dev/null
+/* A Bison parser, made by GNU Bison 2.3. */
+
+/* Skeleton interface for Bison's Yacc-like parsers in C
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
+
+/* As a special exception, you may create a larger work that contains
+ part or all of the Bison parser skeleton and distribute that work
+ under terms of your choice, so long as that work isn't itself a
+ parser generator using the skeleton or a modified version thereof
+ as a parser skeleton. Alternatively, if you modify or redistribute
+ the parser skeleton itself, you may (at your option) remove this
+ special exception, which will cause the skeleton and the resulting
+ Bison output files to be licensed under the GNU General Public
+ License without this special exception.
+
+ This special exception was added by the Free Software Foundation in
+ version 2.2 of Bison. */
+
+/* Tokens. */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+ /* Put the tokens into the symbol table, so that GDB and other debuggers
+ know about them. */
+ enum yytokentype {
+ DT_V1 = 258,
+ DT_MEMRESERVE = 259,
+ DT_PROPNODENAME = 260,
+ DT_LITERAL = 261,
+ DT_LEGACYLITERAL = 262,
+ DT_BASE = 263,
+ DT_BYTE = 264,
+ DT_STRING = 265,
+ DT_LABEL = 266,
+ DT_REF = 267,
+ DT_INCBIN = 268
+ };
+#endif
+/* Tokens. */
+#define DT_V1 258
+#define DT_MEMRESERVE 259
+#define DT_PROPNODENAME 260
+#define DT_LITERAL 261
+#define DT_LEGACYLITERAL 262
+#define DT_BASE 263
+#define DT_BYTE 264
+#define DT_STRING 265
+#define DT_LABEL 266
+#define DT_REF 267
+#define DT_INCBIN 268
+
+
+
+
+#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
+typedef union YYSTYPE
+#line 37 "dtc-parser.y"
+{
+ char *propnodename;
+ char *literal;
+ char *labelref;
+ unsigned int cbase;
+ uint8_t byte;
+ struct data data;
+
+ uint64_t addr;
+ cell_t cell;
+ struct property *prop;
+ struct property *proplist;
+ struct node *node;
+ struct node *nodelist;
+ struct reserve_info *re;
+}
+/* Line 1489 of yacc.c. */
+#line 92 "dtc-parser.tab.h"
+ YYSTYPE;
+# define yystype YYSTYPE /* obsolescent; will be withdrawn */
+# define YYSTYPE_IS_DECLARED 1
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+
+extern YYSTYPE yylval;
+
+#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
+typedef struct YYLTYPE
+{
+ int first_line;
+ int first_column;
+ int last_line;
+ int last_column;
+} YYLTYPE;
+# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
+# define YYLTYPE_IS_DECLARED 1
+# define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+extern YYLTYPE yylloc;
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+%locations
+
+%{
+#include <stdio.h>
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern int yylex(void);
+
+extern struct boot_info *the_boot_info;
+extern int treesource_error;
+
+static unsigned long long eval_literal(const char *s, int base, int bits);
+%}
+
+%union {
+ char *propnodename;
+ char *literal;
+ char *labelref;
+ unsigned int cbase;
+ uint8_t byte;
+ struct data data;
+
+ uint64_t addr;
+ cell_t cell;
+ struct property *prop;
+ struct property *proplist;
+ struct node *node;
+ struct node *nodelist;
+ struct reserve_info *re;
+}
+
+%token DT_V1
+%token DT_MEMRESERVE
+%token <propnodename> DT_PROPNODENAME
+%token <literal> DT_LITERAL
+%token <literal> DT_LEGACYLITERAL
+%token <cbase> DT_BASE
+%token <byte> DT_BYTE
+%token <data> DT_STRING
+%token <labelref> DT_LABEL
+%token <labelref> DT_REF
+%token DT_INCBIN
+
+%type <data> propdata
+%type <data> propdataprefix
+%type <re> memreserve
+%type <re> memreserves
+%type <re> v0_memreserve
+%type <re> v0_memreserves
+%type <addr> addr
+%type <data> celllist
+%type <cbase> cellbase
+%type <cell> cellval
+%type <data> bytestring
+%type <prop> propdef
+%type <proplist> proplist
+
+%type <node> devicetree
+%type <node> nodedef
+%type <node> subnode
+%type <nodelist> subnodes
+%type <labelref> label
+
+%%
+
+sourcefile:
+ DT_V1 ';' memreserves devicetree
+ {
+ the_boot_info = build_boot_info($3, $4, 0);
+ }
+ | v0_memreserves devicetree
+ {
+ the_boot_info = build_boot_info($1, $2, 0);
+ }
+ ;
+
+memreserves:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | memreserve memreserves
+ {
+ $$ = chain_reserve_entry($1, $2);
+ }
+ ;
+
+memreserve:
+ label DT_MEMRESERVE addr addr ';'
+ {
+ $$ = build_reserve_entry($3, $4, $1);
+ }
+ ;
+
+v0_memreserves:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | v0_memreserve v0_memreserves
+ {
+ $$ = chain_reserve_entry($1, $2);
+ };
+ ;
+
+v0_memreserve:
+ memreserve
+ {
+ $$ = $1;
+ }
+ | label DT_MEMRESERVE addr '-' addr ';'
+ {
+ $$ = build_reserve_entry($3, $5 - $3 + 1, $1);
+ }
+ ;
+
+addr:
+ DT_LITERAL
+ {
+ $$ = eval_literal($1, 0, 64);
+ }
+ | DT_LEGACYLITERAL
+ {
+ $$ = eval_literal($1, 16, 64);
+ }
+ ;
+
+devicetree:
+ '/' nodedef
+ {
+ $$ = name_node($2, "", NULL);
+ }
+ ;
+
+nodedef:
+ '{' proplist subnodes '}' ';'
+ {
+ $$ = build_node($2, $3);
+ }
+ ;
+
+proplist:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | proplist propdef
+ {
+ $$ = chain_property($2, $1);
+ }
+ ;
+
+propdef:
+ label DT_PROPNODENAME '=' propdata ';'
+ {
+ $$ = build_property($2, $4, $1);
+ }
+ | label DT_PROPNODENAME ';'
+ {
+ $$ = build_property($2, empty_data, $1);
+ }
+ ;
+
+propdata:
+ propdataprefix DT_STRING
+ {
+ $$ = data_merge($1, $2);
+ }
+ | propdataprefix '<' celllist '>'
+ {
+ $$ = data_merge($1, $3);
+ }
+ | propdataprefix '[' bytestring ']'
+ {
+ $$ = data_merge($1, $3);
+ }
+ | propdataprefix DT_REF
+ {
+ $$ = data_add_marker($1, REF_PATH, $2);
+ }
+ | propdataprefix DT_INCBIN '(' DT_STRING ',' addr ',' addr ')'
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file($4.val, &path);
+ struct data d = empty_data;
+
+ if ($6 != 0)
+ if (fseek(file->file, $6, SEEK_SET) != 0)
+ yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
+ (unsigned long long)$6,
+ $4.val, strerror(errno));
+
+ d = data_copy_file(file->file, $8);
+
+ $$ = data_merge($1, d);
+ dtc_close_file(file);
+ }
+ | propdataprefix DT_INCBIN '(' DT_STRING ')'
+ {
+ struct search_path path = { srcpos_file->dir, NULL, NULL };
+ struct dtc_file *file = dtc_open_file($4.val, &path);
+ struct data d = empty_data;
+
+ d = data_copy_file(file->file, -1);
+
+ $$ = data_merge($1, d);
+ dtc_close_file(file);
+ }
+ | propdata DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+propdataprefix:
+ /* empty */
+ {
+ $$ = empty_data;
+ }
+ | propdata ','
+ {
+ $$ = $1;
+ }
+ | propdataprefix DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+celllist:
+ /* empty */
+ {
+ $$ = empty_data;
+ }
+ | celllist cellval
+ {
+ $$ = data_append_cell($1, $2);
+ }
+ | celllist DT_REF
+ {
+ $$ = data_append_cell(data_add_marker($1, REF_PHANDLE,
+ $2), -1);
+ }
+ | celllist DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+cellbase:
+ /* empty */
+ {
+ $$ = 16;
+ }
+ | DT_BASE
+ ;
+
+cellval:
+ DT_LITERAL
+ {
+ $$ = eval_literal($1, 0, 32);
+ }
+ | cellbase DT_LEGACYLITERAL
+ {
+ $$ = eval_literal($2, $1, 32);
+ }
+ ;
+
+bytestring:
+ /* empty */
+ {
+ $$ = empty_data;
+ }
+ | bytestring DT_BYTE
+ {
+ $$ = data_append_byte($1, $2);
+ }
+ | bytestring DT_LABEL
+ {
+ $$ = data_add_marker($1, LABEL, $2);
+ }
+ ;
+
+subnodes:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | subnode subnodes
+ {
+ $$ = chain_node($1, $2);
+ }
+ | subnode propdef
+ {
+ yyerror("syntax error: properties must precede subnodes");
+ YYERROR;
+ }
+ ;
+
+subnode:
+ label DT_PROPNODENAME nodedef
+ {
+ $$ = name_node($3, $2, $1);
+ }
+ ;
+
+label:
+ /* empty */
+ {
+ $$ = NULL;
+ }
+ | DT_LABEL
+ {
+ $$ = $1;
+ }
+ ;
+
+%%
+
+void yyerrorf(char const *s, ...)
+{
+ const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
+ va_list va;
+ va_start(va, s);
+
+ if (strcmp(fname, "-") == 0)
+ fname = "stdin";
+
+ fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
+ vfprintf(stderr, s, va);
+ fprintf(stderr, "\n");
+
+ treesource_error = 1;
+ va_end(va);
+}
+
+void yyerror (char const *s)
+{
+ yyerrorf("%s", s);
+}
+
+static unsigned long long eval_literal(const char *s, int base, int bits)
+{
+ unsigned long long val;
+ char *e;
+
+ errno = 0;
+ val = strtoull(s, &e, base);
+ if (*e)
+ yyerror("bad characters in literal");
+ else if ((errno == ERANGE)
+ || ((bits < 64) && (val >= (1ULL << bits))))
+ yyerror("literal out of range");
+ else if (errno != 0)
+ yyerror("bad literal");
+ return val;
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+#include "version_gen.h"
+
+/*
+ * Command line options
+ */
+int quiet; /* Level of quietness */
+int reservenum; /* Number of memory reservation slots */
+int minsize; /* Minimum blob size */
+int padsize; /* Additional padding to blob */
+
+char *join_path(const char *path, const char *name)
+{
+ int lenp = strlen(path);
+ int lenn = strlen(name);
+ int len;
+ int needslash = 1;
+ char *str;
+
+ len = lenp + lenn + 2;
+ if ((lenp > 0) && (path[lenp-1] == '/')) {
+ needslash = 0;
+ len--;
+ }
+
+ str = xmalloc(len);
+ memcpy(str, path, lenp);
+ if (needslash) {
+ str[lenp] = '/';
+ lenp++;
+ }
+ memcpy(str+lenp, name, lenn+1);
+ return str;
+}
+
+static void fill_fullpaths(struct node *tree, const char *prefix)
+{
+ struct node *child;
+ const char *unit;
+
+ tree->fullpath = join_path(prefix, tree->name);
+
+ unit = strchr(tree->name, '@');
+ if (unit)
+ tree->basenamelen = unit - tree->name;
+ else
+ tree->basenamelen = strlen(tree->name);
+
+ for_each_child(tree, child)
+ fill_fullpaths(child, tree->fullpath);
+}
+
+static void __attribute__ ((noreturn)) usage(void)
+{
+ fprintf(stderr, "Usage:\n");
+ fprintf(stderr, "\tdtc [options] <input file>\n");
+ fprintf(stderr, "\nOptions:\n");
+ fprintf(stderr, "\t-h\n");
+ fprintf(stderr, "\t\tThis help text\n");
+ fprintf(stderr, "\t-q\n");
+ fprintf(stderr, "\t\tQuiet: -q suppress warnings, -qq errors, -qqq all\n");
+ fprintf(stderr, "\t-I <input format>\n");
+ fprintf(stderr, "\t\tInput formats are:\n");
+ fprintf(stderr, "\t\t\tdts - device tree source text\n");
+ fprintf(stderr, "\t\t\tdtb - device tree blob\n");
+ fprintf(stderr, "\t\t\tfs - /proc/device-tree style directory\n");
+ fprintf(stderr, "\t-o <output file>\n");
+ fprintf(stderr, "\t-O <output format>\n");
+ fprintf(stderr, "\t\tOutput formats are:\n");
+ fprintf(stderr, "\t\t\tdts - device tree source text\n");
+ fprintf(stderr, "\t\t\tdtb - device tree blob\n");
+ fprintf(stderr, "\t\t\tasm - assembler source\n");
+ fprintf(stderr, "\t-V <output version>\n");
+ fprintf(stderr, "\t\tBlob version to produce, defaults to %d (relevant for dtb\n\t\tand asm output only)\n", DEFAULT_FDT_VERSION);
+ fprintf(stderr, "\t-R <number>\n");
+ fprintf(stderr, "\t\tMake space for <number> reserve map entries (relevant for \n\t\tdtb and asm output only)\n");
+ fprintf(stderr, "\t-S <bytes>\n");
+ fprintf(stderr, "\t\tMake the blob at least <bytes> long (extra space)\n");
+ fprintf(stderr, "\t-p <bytes>\n");
+ fprintf(stderr, "\t\tAdd padding to the blob of <bytes> long (extra space)\n");
+ fprintf(stderr, "\t-b <number>\n");
+ fprintf(stderr, "\t\tSet the physical boot cpu\n");
+ fprintf(stderr, "\t-f\n");
+ fprintf(stderr, "\t\tForce - try to produce output even if the input tree has errors\n");
+ fprintf(stderr, "\t-v\n");
+ fprintf(stderr, "\t\tPrint DTC version and exit\n");
+ exit(3);
+}
+
+int main(int argc, char *argv[])
+{
+ struct boot_info *bi;
+ const char *inform = "dts";
+ const char *outform = "dts";
+ const char *outname = "-";
+ int force = 0, check = 0;
+ const char *arg;
+ int opt;
+ FILE *outf = NULL;
+ int outversion = DEFAULT_FDT_VERSION;
+ long long cmdline_boot_cpuid = -1;
+
+ quiet = 0;
+ reservenum = 0;
+ minsize = 0;
+ padsize = 0;
+
+ while ((opt = getopt(argc, argv, "hI:O:o:V:R:S:p:fcqb:v")) != EOF) {
+ switch (opt) {
+ case 'I':
+ inform = optarg;
+ break;
+ case 'O':
+ outform = optarg;
+ break;
+ case 'o':
+ outname = optarg;
+ break;
+ case 'V':
+ outversion = strtol(optarg, NULL, 0);
+ break;
+ case 'R':
+ reservenum = strtol(optarg, NULL, 0);
+ break;
+ case 'S':
+ minsize = strtol(optarg, NULL, 0);
+ break;
+ case 'p':
+ padsize = strtol(optarg, NULL, 0);
+ break;
+ case 'f':
+ force = 1;
+ break;
+ case 'c':
+ check = 1;
+ break;
+ case 'q':
+ quiet++;
+ break;
+ case 'b':
+ cmdline_boot_cpuid = strtoll(optarg, NULL, 0);
+ break;
+ case 'v':
+ printf("Version: %s\n", DTC_VERSION);
+ exit(0);
+ case 'h':
+ default:
+ usage();
+ }
+ }
+
+ if (argc > (optind+1))
+ usage();
+ else if (argc < (optind+1))
+ arg = "-";
+ else
+ arg = argv[optind];
+
+ /* minsize and padsize are mutually exclusive */
+ if (minsize && padsize)
+ die("Can't set both -p and -S\n");
+
+ fprintf(stderr, "DTC: %s->%s on file \"%s\"\n",
+ inform, outform, arg);
+
+ if (streq(inform, "dts"))
+ bi = dt_from_source(arg);
+ else if (streq(inform, "fs"))
+ bi = dt_from_fs(arg);
+ else if(streq(inform, "dtb"))
+ bi = dt_from_blob(arg);
+ else
+ die("Unknown input format \"%s\"\n", inform);
+
+ if (cmdline_boot_cpuid != -1)
+ bi->boot_cpuid_phys = cmdline_boot_cpuid;
+
+ fill_fullpaths(bi->dt, "");
+ process_checks(force, bi);
+
+
+ if (streq(outname, "-")) {
+ outf = stdout;
+ } else {
+ outf = fopen(outname, "w");
+ if (! outf)
+ die("Couldn't open output file %s: %s\n",
+ outname, strerror(errno));
+ }
+
+ if (streq(outform, "dts")) {
+ dt_to_source(outf, bi);
+ } else if (streq(outform, "dtb")) {
+ dt_to_blob(outf, bi, outversion);
+ } else if (streq(outform, "asm")) {
+ dt_to_asm(outf, bi, outversion);
+ } else if (streq(outform, "null")) {
+ /* do nothing */
+ } else {
+ die("Unknown output format \"%s\"\n", outform);
+ }
+
+ exit(0);
+}
--- /dev/null
+#ifndef _DTC_H
+#define _DTC_H
+
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <ctype.h>
+#include <errno.h>
+#include <unistd.h>
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define DEFAULT_FDT_VERSION 17
+/*
+ * Command line options
+ */
+extern int quiet; /* Level of quietness */
+extern int reservenum; /* Number of memory reservation slots */
+extern int minsize; /* Minimum blob size */
+extern int padsize; /* Additional padding to blob */
+
+static inline void __attribute__((noreturn)) die(char * str, ...)
+{
+ va_list ap;
+
+ va_start(ap, str);
+ fprintf(stderr, "FATAL ERROR: ");
+ vfprintf(stderr, str, ap);
+ exit(1);
+}
+
+static inline void *xmalloc(size_t len)
+{
+ void *new = malloc(len);
+
+ if (! new)
+ die("malloc() failed\n");
+
+ return new;
+}
+
+static inline void *xrealloc(void *p, size_t len)
+{
+ void *new = realloc(p, len);
+
+ if (! new)
+ die("realloc() failed (len=%d)\n", len);
+
+ return new;
+}
+
+typedef uint32_t cell_t;
+
+
+#define streq(a, b) (strcmp((a), (b)) == 0)
+#define strneq(a, b, n) (strncmp((a), (b), (n)) == 0)
+
+#define ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+/* Data blobs */
+enum markertype {
+ REF_PHANDLE,
+ REF_PATH,
+ LABEL,
+};
+
+struct marker {
+ enum markertype type;
+ int offset;
+ char *ref;
+ struct marker *next;
+};
+
+struct data {
+ int len;
+ char *val;
+ struct marker *markers;
+};
+
+
+#define empty_data ((struct data){ /* all .members = 0 or NULL */ })
+
+#define for_each_marker(m) \
+ for (; (m); (m) = (m)->next)
+#define for_each_marker_of_type(m, t) \
+ for_each_marker(m) \
+ if ((m)->type == (t))
+
+void data_free(struct data d);
+
+struct data data_grow_for(struct data d, int xlen);
+
+struct data data_copy_mem(const char *mem, int len);
+struct data data_copy_escape_string(const char *s, int len);
+struct data data_copy_file(FILE *f, size_t len);
+
+struct data data_append_data(struct data d, const void *p, int len);
+struct data data_insert_at_marker(struct data d, struct marker *m,
+ const void *p, int len);
+struct data data_merge(struct data d1, struct data d2);
+struct data data_append_cell(struct data d, cell_t word);
+struct data data_append_re(struct data d, const struct fdt_reserve_entry *re);
+struct data data_append_addr(struct data d, uint64_t addr);
+struct data data_append_byte(struct data d, uint8_t byte);
+struct data data_append_zeroes(struct data d, int len);
+struct data data_append_align(struct data d, int align);
+
+struct data data_add_marker(struct data d, enum markertype type, char *ref);
+
+int data_is_one_string(struct data d);
+
+/* DT constraints */
+
+#define MAX_PROPNAME_LEN 31
+#define MAX_NODENAME_LEN 31
+
+/* Live trees */
+struct property {
+ char *name;
+ struct data val;
+
+ struct property *next;
+
+ char *label;
+};
+
+struct node {
+ char *name;
+ struct property *proplist;
+ struct node *children;
+
+ struct node *parent;
+ struct node *next_sibling;
+
+ char *fullpath;
+ int basenamelen;
+
+ cell_t phandle;
+ int addr_cells, size_cells;
+
+ char *label;
+};
+
+#define for_each_property(n, p) \
+ for ((p) = (n)->proplist; (p); (p) = (p)->next)
+
+#define for_each_child(n, c) \
+ for ((c) = (n)->children; (c); (c) = (c)->next_sibling)
+
+struct property *build_property(char *name, struct data val, char *label);
+struct property *chain_property(struct property *first, struct property *list);
+struct property *reverse_properties(struct property *first);
+
+struct node *build_node(struct property *proplist, struct node *children);
+struct node *name_node(struct node *node, char *name, char *label);
+struct node *chain_node(struct node *first, struct node *list);
+
+void add_property(struct node *node, struct property *prop);
+void add_child(struct node *parent, struct node *child);
+
+const char *get_unitname(struct node *node);
+struct property *get_property(struct node *node, const char *propname);
+cell_t propval_cell(struct property *prop);
+struct node *get_subnode(struct node *node, const char *nodename);
+struct node *get_node_by_path(struct node *tree, const char *path);
+struct node *get_node_by_label(struct node *tree, const char *label);
+struct node *get_node_by_phandle(struct node *tree, cell_t phandle);
+struct node *get_node_by_ref(struct node *tree, const char *ref);
+cell_t get_node_phandle(struct node *root, struct node *node);
+
+/* Boot info (tree plus memreserve information */
+
+struct reserve_info {
+ struct fdt_reserve_entry re;
+
+ struct reserve_info *next;
+
+ char *label;
+};
+
+struct reserve_info *build_reserve_entry(uint64_t start, uint64_t len, char *label);
+struct reserve_info *chain_reserve_entry(struct reserve_info *first,
+ struct reserve_info *list);
+struct reserve_info *add_reserve_entry(struct reserve_info *list,
+ struct reserve_info *new);
+
+
+struct boot_info {
+ struct reserve_info *reservelist;
+ struct node *dt; /* the device tree */
+ uint32_t boot_cpuid_phys;
+};
+
+struct boot_info *build_boot_info(struct reserve_info *reservelist,
+ struct node *tree, uint32_t boot_cpuid_phys);
+
+/* Checks */
+
+void process_checks(int force, struct boot_info *bi);
+
+/* Flattened trees */
+
+void dt_to_blob(FILE *f, struct boot_info *bi, int version);
+void dt_to_asm(FILE *f, struct boot_info *bi, int version);
+
+struct boot_info *dt_from_blob(const char *fname);
+
+/* Tree source */
+
+void dt_to_source(FILE *f, struct boot_info *bi);
+struct boot_info *dt_from_source(const char *f);
+
+/* FS trees */
+
+struct boot_info *dt_from_fs(const char *dirname);
+
+/* misc */
+
+char *join_path(const char *path, const char *name);
+
+#endif /* _DTC_H */
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+#define FTF_FULLPATH 0x1
+#define FTF_VARALIGN 0x2
+#define FTF_NAMEPROPS 0x4
+#define FTF_BOOTCPUID 0x8
+#define FTF_STRTABSIZE 0x10
+#define FTF_STRUCTSIZE 0x20
+#define FTF_NOPS 0x40
+
+static struct version_info {
+ int version;
+ int last_comp_version;
+ int hdr_size;
+ int flags;
+} version_table[] = {
+ {1, 1, FDT_V1_SIZE,
+ FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS},
+ {2, 1, FDT_V2_SIZE,
+ FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID},
+ {3, 1, FDT_V3_SIZE,
+ FTF_FULLPATH|FTF_VARALIGN|FTF_NAMEPROPS|FTF_BOOTCPUID|FTF_STRTABSIZE},
+ {16, 16, FDT_V3_SIZE,
+ FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_NOPS},
+ {17, 16, FDT_V17_SIZE,
+ FTF_BOOTCPUID|FTF_STRTABSIZE|FTF_STRUCTSIZE|FTF_NOPS},
+};
+
+struct emitter {
+ void (*cell)(void *, cell_t);
+ void (*string)(void *, char *, int);
+ void (*align)(void *, int);
+ void (*data)(void *, struct data);
+ void (*beginnode)(void *, const char *);
+ void (*endnode)(void *, const char *);
+ void (*property)(void *, const char *);
+};
+
+static void bin_emit_cell(void *e, cell_t val)
+{
+ struct data *dtbuf = e;
+
+ *dtbuf = data_append_cell(*dtbuf, val);
+}
+
+static void bin_emit_string(void *e, char *str, int len)
+{
+ struct data *dtbuf = e;
+
+ if (len == 0)
+ len = strlen(str);
+
+ *dtbuf = data_append_data(*dtbuf, str, len);
+ *dtbuf = data_append_byte(*dtbuf, '\0');
+}
+
+static void bin_emit_align(void *e, int a)
+{
+ struct data *dtbuf = e;
+
+ *dtbuf = data_append_align(*dtbuf, a);
+}
+
+static void bin_emit_data(void *e, struct data d)
+{
+ struct data *dtbuf = e;
+
+ *dtbuf = data_append_data(*dtbuf, d.val, d.len);
+}
+
+static void bin_emit_beginnode(void *e, const char *label)
+{
+ bin_emit_cell(e, FDT_BEGIN_NODE);
+}
+
+static void bin_emit_endnode(void *e, const char *label)
+{
+ bin_emit_cell(e, FDT_END_NODE);
+}
+
+static void bin_emit_property(void *e, const char *label)
+{
+ bin_emit_cell(e, FDT_PROP);
+}
+
+static struct emitter bin_emitter = {
+ .cell = bin_emit_cell,
+ .string = bin_emit_string,
+ .align = bin_emit_align,
+ .data = bin_emit_data,
+ .beginnode = bin_emit_beginnode,
+ .endnode = bin_emit_endnode,
+ .property = bin_emit_property,
+};
+
+static void emit_label(FILE *f, const char *prefix, const char *label)
+{
+ fprintf(f, "\t.globl\t%s_%s\n", prefix, label);
+ fprintf(f, "%s_%s:\n", prefix, label);
+ fprintf(f, "_%s_%s:\n", prefix, label);
+}
+
+static void emit_offset_label(FILE *f, const char *label, int offset)
+{
+ fprintf(f, "\t.globl\t%s\n", label);
+ fprintf(f, "%s\t= . + %d\n", label, offset);
+}
+
+static void asm_emit_cell(void *e, cell_t val)
+{
+ FILE *f = e;
+
+ fprintf(f, "\t.long\t0x%x\n", val);
+}
+
+static void asm_emit_string(void *e, char *str, int len)
+{
+ FILE *f = e;
+ char c = 0;
+
+ if (len != 0) {
+ /* XXX: ewww */
+ c = str[len];
+ str[len] = '\0';
+ }
+
+ fprintf(f, "\t.string\t\"%s\"\n", str);
+
+ if (len != 0) {
+ str[len] = c;
+ }
+}
+
+static void asm_emit_align(void *e, int a)
+{
+ FILE *f = e;
+
+ fprintf(f, "\t.balign\t%d\n", a);
+}
+
+static void asm_emit_data(void *e, struct data d)
+{
+ FILE *f = e;
+ int off = 0;
+ struct marker *m = d.markers;
+
+ for_each_marker_of_type(m, LABEL)
+ emit_offset_label(f, m->ref, m->offset);
+
+ while ((d.len - off) >= sizeof(uint32_t)) {
+ fprintf(f, "\t.long\t0x%x\n",
+ fdt32_to_cpu(*((uint32_t *)(d.val+off))));
+ off += sizeof(uint32_t);
+ }
+
+ while ((d.len - off) >= 1) {
+ fprintf(f, "\t.byte\t0x%hhx\n", d.val[off]);
+ off += 1;
+ }
+
+ assert(off == d.len);
+}
+
+static void asm_emit_beginnode(void *e, const char *label)
+{
+ FILE *f = e;
+
+ if (label) {
+ fprintf(f, "\t.globl\t%s\n", label);
+ fprintf(f, "%s:\n", label);
+ }
+ fprintf(f, "\t.long\tFDT_BEGIN_NODE\n");
+}
+
+static void asm_emit_endnode(void *e, const char *label)
+{
+ FILE *f = e;
+
+ fprintf(f, "\t.long\tFDT_END_NODE\n");
+ if (label) {
+ fprintf(f, "\t.globl\t%s_end\n", label);
+ fprintf(f, "%s_end:\n", label);
+ }
+}
+
+static void asm_emit_property(void *e, const char *label)
+{
+ FILE *f = e;
+
+ if (label) {
+ fprintf(f, "\t.globl\t%s\n", label);
+ fprintf(f, "%s:\n", label);
+ }
+ fprintf(f, "\t.long\tFDT_PROP\n");
+}
+
+static struct emitter asm_emitter = {
+ .cell = asm_emit_cell,
+ .string = asm_emit_string,
+ .align = asm_emit_align,
+ .data = asm_emit_data,
+ .beginnode = asm_emit_beginnode,
+ .endnode = asm_emit_endnode,
+ .property = asm_emit_property,
+};
+
+static int stringtable_insert(struct data *d, const char *str)
+{
+ int i;
+
+ /* FIXME: do this more efficiently? */
+
+ for (i = 0; i < d->len; i++) {
+ if (streq(str, d->val + i))
+ return i;
+ }
+
+ *d = data_append_data(*d, str, strlen(str)+1);
+ return i;
+}
+
+static void flatten_tree(struct node *tree, struct emitter *emit,
+ void *etarget, struct data *strbuf,
+ struct version_info *vi)
+{
+ struct property *prop;
+ struct node *child;
+ int seen_name_prop = 0;
+
+ emit->beginnode(etarget, tree->label);
+
+ if (vi->flags & FTF_FULLPATH)
+ emit->string(etarget, tree->fullpath, 0);
+ else
+ emit->string(etarget, tree->name, 0);
+
+ emit->align(etarget, sizeof(cell_t));
+
+ for_each_property(tree, prop) {
+ int nameoff;
+
+ if (streq(prop->name, "name"))
+ seen_name_prop = 1;
+
+ nameoff = stringtable_insert(strbuf, prop->name);
+
+ emit->property(etarget, prop->label);
+ emit->cell(etarget, prop->val.len);
+ emit->cell(etarget, nameoff);
+
+ if ((vi->flags & FTF_VARALIGN) && (prop->val.len >= 8))
+ emit->align(etarget, 8);
+
+ emit->data(etarget, prop->val);
+ emit->align(etarget, sizeof(cell_t));
+ }
+
+ if ((vi->flags & FTF_NAMEPROPS) && !seen_name_prop) {
+ emit->property(etarget, NULL);
+ emit->cell(etarget, tree->basenamelen+1);
+ emit->cell(etarget, stringtable_insert(strbuf, "name"));
+
+ if ((vi->flags & FTF_VARALIGN) && ((tree->basenamelen+1) >= 8))
+ emit->align(etarget, 8);
+
+ emit->string(etarget, tree->name, tree->basenamelen);
+ emit->align(etarget, sizeof(cell_t));
+ }
+
+ for_each_child(tree, child) {
+ flatten_tree(child, emit, etarget, strbuf, vi);
+ }
+
+ emit->endnode(etarget, tree->label);
+}
+
+static struct data flatten_reserve_list(struct reserve_info *reservelist,
+ struct version_info *vi)
+{
+ struct reserve_info *re;
+ struct data d = empty_data;
+ static struct fdt_reserve_entry null_re = {0,0};
+ int j;
+
+ for (re = reservelist; re; re = re->next) {
+ d = data_append_re(d, &re->re);
+ }
+ /*
+ * Add additional reserved slots if the user asked for them.
+ */
+ for (j = 0; j < reservenum; j++) {
+ d = data_append_re(d, &null_re);
+ }
+
+ return d;
+}
+
+static void make_fdt_header(struct fdt_header *fdt,
+ struct version_info *vi,
+ int reservesize, int dtsize, int strsize,
+ int boot_cpuid_phys)
+{
+ int reserve_off;
+
+ reservesize += sizeof(struct fdt_reserve_entry);
+
+ memset(fdt, 0xff, sizeof(*fdt));
+
+ fdt->magic = cpu_to_fdt32(FDT_MAGIC);
+ fdt->version = cpu_to_fdt32(vi->version);
+ fdt->last_comp_version = cpu_to_fdt32(vi->last_comp_version);
+
+ /* Reserve map should be doubleword aligned */
+ reserve_off = ALIGN(vi->hdr_size, 8);
+
+ fdt->off_mem_rsvmap = cpu_to_fdt32(reserve_off);
+ fdt->off_dt_struct = cpu_to_fdt32(reserve_off + reservesize);
+ fdt->off_dt_strings = cpu_to_fdt32(reserve_off + reservesize
+ + dtsize);
+ fdt->totalsize = cpu_to_fdt32(reserve_off + reservesize + dtsize + strsize);
+
+ if (vi->flags & FTF_BOOTCPUID)
+ fdt->boot_cpuid_phys = cpu_to_fdt32(boot_cpuid_phys);
+ if (vi->flags & FTF_STRTABSIZE)
+ fdt->size_dt_strings = cpu_to_fdt32(strsize);
+ if (vi->flags & FTF_STRUCTSIZE)
+ fdt->size_dt_struct = cpu_to_fdt32(dtsize);
+}
+
+void dt_to_blob(FILE *f, struct boot_info *bi, int version)
+{
+ struct version_info *vi = NULL;
+ int i;
+ struct data blob = empty_data;
+ struct data reservebuf = empty_data;
+ struct data dtbuf = empty_data;
+ struct data strbuf = empty_data;
+ struct fdt_header fdt;
+ int padlen = 0;
+
+ for (i = 0; i < ARRAY_SIZE(version_table); i++) {
+ if (version_table[i].version == version)
+ vi = &version_table[i];
+ }
+ if (!vi)
+ die("Unknown device tree blob version %d\n", version);
+
+ flatten_tree(bi->dt, &bin_emitter, &dtbuf, &strbuf, vi);
+ bin_emit_cell(&dtbuf, FDT_END);
+
+ reservebuf = flatten_reserve_list(bi->reservelist, vi);
+
+ /* Make header */
+ make_fdt_header(&fdt, vi, reservebuf.len, dtbuf.len, strbuf.len,
+ bi->boot_cpuid_phys);
+
+ /*
+ * If the user asked for more space than is used, adjust the totalsize.
+ */
+ if (minsize > 0) {
+ padlen = minsize - fdt32_to_cpu(fdt.totalsize);
+ if ((padlen < 0) && (quiet < 1))
+ fprintf(stderr,
+ "Warning: blob size %d >= minimum size %d\n",
+ fdt32_to_cpu(fdt.totalsize), minsize);
+ }
+
+ if (padsize > 0)
+ padlen = padsize;
+
+ if (padlen > 0) {
+ int tsize = fdt32_to_cpu(fdt.totalsize);
+ tsize += padlen;
+ fdt.totalsize = cpu_to_fdt32(tsize);
+ }
+
+ /*
+ * Assemble the blob: start with the header, add with alignment
+ * the reserve buffer, add the reserve map terminating zeroes,
+ * the device tree itself, and finally the strings.
+ */
+ blob = data_append_data(blob, &fdt, vi->hdr_size);
+ blob = data_append_align(blob, 8);
+ blob = data_merge(blob, reservebuf);
+ blob = data_append_zeroes(blob, sizeof(struct fdt_reserve_entry));
+ blob = data_merge(blob, dtbuf);
+ blob = data_merge(blob, strbuf);
+
+ /*
+ * If the user asked for more space than is used, pad out the blob.
+ */
+ if (padlen > 0)
+ blob = data_append_zeroes(blob, padlen);
+
+ fwrite(blob.val, blob.len, 1, f);
+
+ if (ferror(f))
+ die("Error writing device tree blob: %s\n", strerror(errno));
+
+ /*
+ * data_merge() frees the right-hand element so only the blob
+ * remains to be freed.
+ */
+ data_free(blob);
+}
+
+static void dump_stringtable_asm(FILE *f, struct data strbuf)
+{
+ const char *p;
+ int len;
+
+ p = strbuf.val;
+
+ while (p < (strbuf.val + strbuf.len)) {
+ len = strlen(p);
+ fprintf(f, "\t.string \"%s\"\n", p);
+ p += len+1;
+ }
+}
+
+void dt_to_asm(FILE *f, struct boot_info *bi, int version)
+{
+ struct version_info *vi = NULL;
+ int i;
+ struct data strbuf = empty_data;
+ struct reserve_info *re;
+ const char *symprefix = "dt";
+
+ for (i = 0; i < ARRAY_SIZE(version_table); i++) {
+ if (version_table[i].version == version)
+ vi = &version_table[i];
+ }
+ if (!vi)
+ die("Unknown device tree blob version %d\n", version);
+
+ fprintf(f, "/* autogenerated by dtc, do not edit */\n\n");
+ fprintf(f, "#define FDT_MAGIC 0x%x\n", FDT_MAGIC);
+ fprintf(f, "#define FDT_BEGIN_NODE 0x%x\n", FDT_BEGIN_NODE);
+ fprintf(f, "#define FDT_END_NODE 0x%x\n", FDT_END_NODE);
+ fprintf(f, "#define FDT_PROP 0x%x\n", FDT_PROP);
+ fprintf(f, "#define FDT_END 0x%x\n", FDT_END);
+ fprintf(f, "\n");
+
+ emit_label(f, symprefix, "blob_start");
+ emit_label(f, symprefix, "header");
+ fprintf(f, "\t.long\tFDT_MAGIC\t\t\t\t/* magic */\n");
+ fprintf(f, "\t.long\t_%s_blob_abs_end - _%s_blob_start\t/* totalsize */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t_%s_struct_start - _%s_blob_start\t/* off_dt_struct */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t_%s_strings_start - _%s_blob_start\t/* off_dt_strings */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t_%s_reserve_map - _%s_blob_start\t/* off_dt_strings */\n",
+ symprefix, symprefix);
+ fprintf(f, "\t.long\t%d\t\t\t\t\t/* version */\n", vi->version);
+ fprintf(f, "\t.long\t%d\t\t\t\t\t/* last_comp_version */\n",
+ vi->last_comp_version);
+
+ if (vi->flags & FTF_BOOTCPUID)
+ fprintf(f, "\t.long\t%i\t\t\t\t\t/* boot_cpuid_phys */\n",
+ bi->boot_cpuid_phys);
+
+ if (vi->flags & FTF_STRTABSIZE)
+ fprintf(f, "\t.long\t_%s_strings_end - _%s_strings_start\t/* size_dt_strings */\n",
+ symprefix, symprefix);
+
+ if (vi->flags & FTF_STRUCTSIZE)
+ fprintf(f, "\t.long\t_%s_struct_end - _%s_struct_start\t/* size_dt_struct */\n",
+ symprefix, symprefix);
+
+ /*
+ * Reserve map entries.
+ * Align the reserve map to a doubleword boundary.
+ * Each entry is an (address, size) pair of u64 values.
+ * Always supply a zero-sized temination entry.
+ */
+ asm_emit_align(f, 8);
+ emit_label(f, symprefix, "reserve_map");
+
+ fprintf(f, "/* Memory reserve map from source file */\n");
+
+ /*
+ * Use .long on high and low halfs of u64s to avoid .quad
+ * as it appears .quad isn't available in some assemblers.
+ */
+ for (re = bi->reservelist; re; re = re->next) {
+ if (re->label) {
+ fprintf(f, "\t.globl\t%s\n", re->label);
+ fprintf(f, "%s:\n", re->label);
+ }
+ fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
+ (unsigned int)(re->re.address >> 32),
+ (unsigned int)(re->re.address & 0xffffffff));
+ fprintf(f, "\t.long\t0x%08x, 0x%08x\n",
+ (unsigned int)(re->re.size >> 32),
+ (unsigned int)(re->re.size & 0xffffffff));
+ }
+ for (i = 0; i < reservenum; i++) {
+ fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
+ }
+
+ fprintf(f, "\t.long\t0, 0\n\t.long\t0, 0\n");
+
+ emit_label(f, symprefix, "struct_start");
+ flatten_tree(bi->dt, &asm_emitter, f, &strbuf, vi);
+ fprintf(f, "\t.long\tFDT_END\n");
+ emit_label(f, symprefix, "struct_end");
+
+ emit_label(f, symprefix, "strings_start");
+ dump_stringtable_asm(f, strbuf);
+ emit_label(f, symprefix, "strings_end");
+
+ emit_label(f, symprefix, "blob_end");
+
+ /*
+ * If the user asked for more space than is used, pad it out.
+ */
+ if (minsize > 0) {
+ fprintf(f, "\t.space\t%d - (_%s_blob_end - _%s_blob_start), 0\n",
+ minsize, symprefix, symprefix);
+ }
+ if (padsize > 0) {
+ fprintf(f, "\t.space\t%d, 0\n", padsize);
+ }
+ emit_label(f, symprefix, "blob_abs_end");
+
+ data_free(strbuf);
+}
+
+struct inbuf {
+ char *base, *limit, *ptr;
+};
+
+static void inbuf_init(struct inbuf *inb, void *base, void *limit)
+{
+ inb->base = base;
+ inb->limit = limit;
+ inb->ptr = inb->base;
+}
+
+static void flat_read_chunk(struct inbuf *inb, void *p, int len)
+{
+ if ((inb->ptr + len) > inb->limit)
+ die("Premature end of data parsing flat device tree\n");
+
+ memcpy(p, inb->ptr, len);
+
+ inb->ptr += len;
+}
+
+static uint32_t flat_read_word(struct inbuf *inb)
+{
+ uint32_t val;
+
+ assert(((inb->ptr - inb->base) % sizeof(val)) == 0);
+
+ flat_read_chunk(inb, &val, sizeof(val));
+
+ return fdt32_to_cpu(val);
+}
+
+static void flat_realign(struct inbuf *inb, int align)
+{
+ int off = inb->ptr - inb->base;
+
+ inb->ptr = inb->base + ALIGN(off, align);
+ if (inb->ptr > inb->limit)
+ die("Premature end of data parsing flat device tree\n");
+}
+
+static char *flat_read_string(struct inbuf *inb)
+{
+ int len = 0;
+ const char *p = inb->ptr;
+ char *str;
+
+ do {
+ if (p >= inb->limit)
+ die("Premature end of data parsing flat device tree\n");
+ len++;
+ } while ((*p++) != '\0');
+
+ str = strdup(inb->ptr);
+
+ inb->ptr += len;
+
+ flat_realign(inb, sizeof(uint32_t));
+
+ return str;
+}
+
+static struct data flat_read_data(struct inbuf *inb, int len)
+{
+ struct data d = empty_data;
+
+ if (len == 0)
+ return empty_data;
+
+ d = data_grow_for(d, len);
+ d.len = len;
+
+ flat_read_chunk(inb, d.val, len);
+
+ flat_realign(inb, sizeof(uint32_t));
+
+ return d;
+}
+
+static char *flat_read_stringtable(struct inbuf *inb, int offset)
+{
+ const char *p;
+
+ p = inb->base + offset;
+ while (1) {
+ if (p >= inb->limit || p < inb->base)
+ die("String offset %d overruns string table\n",
+ offset);
+
+ if (*p == '\0')
+ break;
+
+ p++;
+ }
+
+ return strdup(inb->base + offset);
+}
+
+static struct property *flat_read_property(struct inbuf *dtbuf,
+ struct inbuf *strbuf, int flags)
+{
+ uint32_t proplen, stroff;
+ char *name;
+ struct data val;
+
+ proplen = flat_read_word(dtbuf);
+ stroff = flat_read_word(dtbuf);
+
+ name = flat_read_stringtable(strbuf, stroff);
+
+ if ((flags & FTF_VARALIGN) && (proplen >= 8))
+ flat_realign(dtbuf, 8);
+
+ val = flat_read_data(dtbuf, proplen);
+
+ return build_property(name, val, NULL);
+}
+
+
+static struct reserve_info *flat_read_mem_reserve(struct inbuf *inb)
+{
+ struct reserve_info *reservelist = NULL;
+ struct reserve_info *new;
+ const char *p;
+ struct fdt_reserve_entry re;
+
+ /*
+ * Each entry is a pair of u64 (addr, size) values for 4 cell_t's.
+ * List terminates at an entry with size equal to zero.
+ *
+ * First pass, count entries.
+ */
+ p = inb->ptr;
+ while (1) {
+ flat_read_chunk(inb, &re, sizeof(re));
+ re.address = fdt64_to_cpu(re.address);
+ re.size = fdt64_to_cpu(re.size);
+ if (re.size == 0)
+ break;
+
+ new = build_reserve_entry(re.address, re.size, NULL);
+ reservelist = add_reserve_entry(reservelist, new);
+ }
+
+ return reservelist;
+}
+
+
+static char *nodename_from_path(const char *ppath, const char *cpath)
+{
+ int plen;
+
+ plen = strlen(ppath);
+
+ if (!strneq(ppath, cpath, plen))
+ die("Path \"%s\" is not valid as a child of \"%s\"\n",
+ cpath, ppath);
+
+ /* root node is a special case */
+ if (!streq(ppath, "/"))
+ plen++;
+
+ return strdup(cpath + plen);
+}
+
+static struct node *unflatten_tree(struct inbuf *dtbuf,
+ struct inbuf *strbuf,
+ const char *parent_flatname, int flags)
+{
+ struct node *node;
+ char *flatname;
+ uint32_t val;
+
+ node = build_node(NULL, NULL);
+
+ flatname = flat_read_string(dtbuf);
+
+ if (flags & FTF_FULLPATH)
+ node->name = nodename_from_path(parent_flatname, flatname);
+ else
+ node->name = flatname;
+
+ do {
+ struct property *prop;
+ struct node *child;
+
+ val = flat_read_word(dtbuf);
+ switch (val) {
+ case FDT_PROP:
+ if (node->children)
+ fprintf(stderr, "Warning: Flat tree input has "
+ "subnodes preceding a property.\n");
+ prop = flat_read_property(dtbuf, strbuf, flags);
+ add_property(node, prop);
+ break;
+
+ case FDT_BEGIN_NODE:
+ child = unflatten_tree(dtbuf,strbuf, flatname, flags);
+ add_child(node, child);
+ break;
+
+ case FDT_END_NODE:
+ break;
+
+ case FDT_END:
+ die("Premature FDT_END in device tree blob\n");
+ break;
+
+ case FDT_NOP:
+ if (!(flags & FTF_NOPS))
+ fprintf(stderr, "Warning: NOP tag found in flat tree"
+ " version <16\n");
+
+ /* Ignore */
+ break;
+
+ default:
+ die("Invalid opcode word %08x in device tree blob\n",
+ val);
+ }
+ } while (val != FDT_END_NODE);
+
+ return node;
+}
+
+
+struct boot_info *dt_from_blob(const char *fname)
+{
+ struct dtc_file *dtcf;
+ uint32_t magic, totalsize, version, size_dt, boot_cpuid_phys;
+ uint32_t off_dt, off_str, off_mem_rsvmap;
+ int rc;
+ char *blob;
+ struct fdt_header *fdt;
+ char *p;
+ struct inbuf dtbuf, strbuf;
+ struct inbuf memresvbuf;
+ int sizeleft;
+ struct reserve_info *reservelist;
+ struct node *tree;
+ uint32_t val;
+ int flags = 0;
+
+ dtcf = dtc_open_file(fname, NULL);
+
+ rc = fread(&magic, sizeof(magic), 1, dtcf->file);
+ if (ferror(dtcf->file))
+ die("Error reading DT blob magic number: %s\n",
+ strerror(errno));
+ if (rc < 1) {
+ if (feof(dtcf->file))
+ die("EOF reading DT blob magic number\n");
+ else
+ die("Mysterious short read reading magic number\n");
+ }
+
+ magic = fdt32_to_cpu(magic);
+ if (magic != FDT_MAGIC)
+ die("Blob has incorrect magic number\n");
+
+ rc = fread(&totalsize, sizeof(totalsize), 1, dtcf->file);
+ if (ferror(dtcf->file))
+ die("Error reading DT blob size: %s\n", strerror(errno));
+ if (rc < 1) {
+ if (feof(dtcf->file))
+ die("EOF reading DT blob size\n");
+ else
+ die("Mysterious short read reading blob size\n");
+ }
+
+ totalsize = fdt32_to_cpu(totalsize);
+ if (totalsize < FDT_V1_SIZE)
+ die("DT blob size (%d) is too small\n", totalsize);
+
+ blob = xmalloc(totalsize);
+
+ fdt = (struct fdt_header *)blob;
+ fdt->magic = cpu_to_fdt32(magic);
+ fdt->totalsize = cpu_to_fdt32(totalsize);
+
+ sizeleft = totalsize - sizeof(magic) - sizeof(totalsize);
+ p = blob + sizeof(magic) + sizeof(totalsize);
+
+ while (sizeleft) {
+ if (feof(dtcf->file))
+ die("EOF before reading %d bytes of DT blob\n",
+ totalsize);
+
+ rc = fread(p, 1, sizeleft, dtcf->file);
+ if (ferror(dtcf->file))
+ die("Error reading DT blob: %s\n",
+ strerror(errno));
+
+ sizeleft -= rc;
+ p += rc;
+ }
+
+ off_dt = fdt32_to_cpu(fdt->off_dt_struct);
+ off_str = fdt32_to_cpu(fdt->off_dt_strings);
+ off_mem_rsvmap = fdt32_to_cpu(fdt->off_mem_rsvmap);
+ version = fdt32_to_cpu(fdt->version);
+ boot_cpuid_phys = fdt32_to_cpu(fdt->boot_cpuid_phys);
+
+ if (off_mem_rsvmap >= totalsize)
+ die("Mem Reserve structure offset exceeds total size\n");
+
+ if (off_dt >= totalsize)
+ die("DT structure offset exceeds total size\n");
+
+ if (off_str > totalsize)
+ die("String table offset exceeds total size\n");
+
+ if (version >= 3) {
+ uint32_t size_str = fdt32_to_cpu(fdt->size_dt_strings);
+ if (off_str+size_str > totalsize)
+ die("String table extends past total size\n");
+ inbuf_init(&strbuf, blob + off_str, blob + off_str + size_str);
+ } else {
+ inbuf_init(&strbuf, blob + off_str, blob + totalsize);
+ }
+
+ if (version >= 17) {
+ size_dt = fdt32_to_cpu(fdt->size_dt_struct);
+ if (off_dt+size_dt > totalsize)
+ die("Structure block extends past total size\n");
+ }
+
+ if (version < 16) {
+ flags |= FTF_FULLPATH | FTF_NAMEPROPS | FTF_VARALIGN;
+ } else {
+ flags |= FTF_NOPS;
+ }
+
+ inbuf_init(&memresvbuf,
+ blob + off_mem_rsvmap, blob + totalsize);
+ inbuf_init(&dtbuf, blob + off_dt, blob + totalsize);
+
+ reservelist = flat_read_mem_reserve(&memresvbuf);
+
+ val = flat_read_word(&dtbuf);
+
+ if (val != FDT_BEGIN_NODE)
+ die("Device tree blob doesn't begin with FDT_BEGIN_NODE (begins with 0x%08x)\n", val);
+
+ tree = unflatten_tree(&dtbuf, &strbuf, "", flags);
+
+ val = flat_read_word(&dtbuf);
+ if (val != FDT_END)
+ die("Device tree blob doesn't end with FDT_END\n");
+
+ free(blob);
+
+ dtc_close_file(dtcf);
+
+ return build_boot_info(reservelist, tree, boot_cpuid_phys);
+}
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+#include <dirent.h>
+#include <sys/stat.h>
+
+static struct node *read_fstree(const char *dirname)
+{
+ DIR *d;
+ struct dirent *de;
+ struct stat st;
+ struct node *tree;
+
+ d = opendir(dirname);
+ if (!d)
+ die("Couldn't opendir() \"%s\": %s\n", dirname, strerror(errno));
+
+ tree = build_node(NULL, NULL);
+
+ while ((de = readdir(d)) != NULL) {
+ char *tmpnam;
+
+ if (streq(de->d_name, ".")
+ || streq(de->d_name, ".."))
+ continue;
+
+ tmpnam = join_path(dirname, de->d_name);
+
+ if (lstat(tmpnam, &st) < 0)
+ die("stat(%s): %s\n", tmpnam, strerror(errno));
+
+ if (S_ISREG(st.st_mode)) {
+ struct property *prop;
+ FILE *pfile;
+
+ pfile = fopen(tmpnam, "r");
+ if (! pfile) {
+ fprintf(stderr,
+ "WARNING: Cannot open %s: %s\n",
+ tmpnam, strerror(errno));
+ } else {
+ prop = build_property(strdup(de->d_name),
+ data_copy_file(pfile,
+ st.st_size),
+ NULL);
+ add_property(tree, prop);
+ fclose(pfile);
+ }
+ } else if (S_ISDIR(st.st_mode)) {
+ struct node *newchild;
+
+ newchild = read_fstree(tmpnam);
+ newchild = name_node(newchild, strdup(de->d_name),
+ NULL);
+ add_child(tree, newchild);
+ }
+
+ free(tmpnam);
+ }
+
+ return tree;
+}
+
+struct boot_info *dt_from_fs(const char *dirname)
+{
+ struct node *tree;
+
+ tree = read_fstree(dirname);
+ tree = name_node(tree, "", NULL);
+
+ return build_boot_info(NULL, tree, 0);
+}
+
--- /dev/null
+# Makefile.libfdt
+#
+# This is not a complete Makefile of itself. Instead, it is designed to
+# be easily embeddable into other systems of Makefiles.
+#
+LIBFDT_INCLUDES = fdt.h libfdt.h
+LIBFDT_SRCS = fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+LIBFDT_OBJS = $(LIBFDT_SRCS:%.c=%.o)
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_check_header(const void *fdt)
+{
+ if (fdt_magic(fdt) == FDT_MAGIC) {
+ /* Complete tree */
+ if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION)
+ return -FDT_ERR_BADVERSION;
+ if (fdt_last_comp_version(fdt) > FDT_LAST_SUPPORTED_VERSION)
+ return -FDT_ERR_BADVERSION;
+ } else if (fdt_magic(fdt) == FDT_SW_MAGIC) {
+ /* Unfinished sequential-write blob */
+ if (fdt_size_dt_struct(fdt) == 0)
+ return -FDT_ERR_BADSTATE;
+ } else {
+ return -FDT_ERR_BADMAGIC;
+ }
+
+ return 0;
+}
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int len)
+{
+ const char *p;
+
+ if (fdt_version(fdt) >= 0x11)
+ if (((offset + len) < offset)
+ || ((offset + len) > fdt_size_dt_struct(fdt)))
+ return NULL;
+
+ p = _fdt_offset_ptr(fdt, offset);
+
+ if (p + len < p)
+ return NULL;
+ return p;
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset)
+{
+ const uint32_t *tagp, *lenp;
+ uint32_t tag;
+ const char *p;
+
+ if (offset % FDT_TAGSIZE)
+ return -1;
+
+ tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE);
+ if (! tagp)
+ return FDT_END; /* premature end */
+ tag = fdt32_to_cpu(*tagp);
+ offset += FDT_TAGSIZE;
+
+ switch (tag) {
+ case FDT_BEGIN_NODE:
+ /* skip name */
+ do {
+ p = fdt_offset_ptr(fdt, offset++, 1);
+ } while (p && (*p != '\0'));
+ if (! p)
+ return FDT_END;
+ break;
+ case FDT_PROP:
+ lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp));
+ if (! lenp)
+ return FDT_END;
+ /* skip name offset, length and value */
+ offset += 2*FDT_TAGSIZE + fdt32_to_cpu(*lenp);
+ break;
+ }
+
+ if (nextoffset)
+ *nextoffset = FDT_TAGALIGN(offset);
+
+ return tag;
+}
+
+int _fdt_check_node_offset(const void *fdt, int offset)
+{
+ if ((offset < 0) || (offset % FDT_TAGSIZE)
+ || (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE))
+ return -FDT_ERR_BADOFFSET;
+
+ return offset;
+}
+
+int fdt_next_node(const void *fdt, int offset, int *depth)
+{
+ int nextoffset = 0;
+ uint32_t tag;
+
+ if (offset >= 0)
+ if ((nextoffset = _fdt_check_node_offset(fdt, offset)) < 0)
+ return nextoffset;
+
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_PROP:
+ case FDT_NOP:
+ break;
+
+ case FDT_BEGIN_NODE:
+ if (depth)
+ (*depth)++;
+ break;
+
+ case FDT_END_NODE:
+ if (depth)
+ (*depth)--;
+ break;
+
+ case FDT_END:
+ return -FDT_ERR_NOTFOUND;
+
+ default:
+ return -FDT_ERR_BADSTRUCTURE;
+ }
+ } while (tag != FDT_BEGIN_NODE);
+
+ return offset;
+}
+
+const char *_fdt_find_string(const char *strtab, int tabsize, const char *s)
+{
+ int len = strlen(s) + 1;
+ const char *last = strtab + tabsize - len;
+ const char *p;
+
+ for (p = strtab; p <= last; p++)
+ if (memcmp(p, s, len) == 0)
+ return p;
+ return NULL;
+}
+
+int fdt_move(const void *fdt, void *buf, int bufsize)
+{
+ FDT_CHECK_HEADER(fdt);
+
+ if (fdt_totalsize(fdt) > bufsize)
+ return -FDT_ERR_NOSPACE;
+
+ memmove(buf, fdt, fdt_totalsize(fdt));
+ return 0;
+}
--- /dev/null
+#ifndef _FDT_H
+#define _FDT_H
+
+#ifndef __ASSEMBLY__
+
+struct fdt_header {
+ uint32_t magic; /* magic word FDT_MAGIC */
+ uint32_t totalsize; /* total size of DT block */
+ uint32_t off_dt_struct; /* offset to structure */
+ uint32_t off_dt_strings; /* offset to strings */
+ uint32_t off_mem_rsvmap; /* offset to memory reserve map */
+ uint32_t version; /* format version */
+ uint32_t last_comp_version; /* last compatible version */
+
+ /* version 2 fields below */
+ uint32_t boot_cpuid_phys; /* Which physical CPU id we're
+ booting on */
+ /* version 3 fields below */
+ uint32_t size_dt_strings; /* size of the strings block */
+
+ /* version 17 fields below */
+ uint32_t size_dt_struct; /* size of the structure block */
+};
+
+struct fdt_reserve_entry {
+ uint64_t address;
+ uint64_t size;
+};
+
+struct fdt_node_header {
+ uint32_t tag;
+ char name[0];
+};
+
+struct fdt_property {
+ uint32_t tag;
+ uint32_t len;
+ uint32_t nameoff;
+ char data[0];
+};
+
+#endif /* !__ASSEMBLY */
+
+#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */
+#define FDT_TAGSIZE sizeof(uint32_t)
+
+#define FDT_BEGIN_NODE 0x1 /* Start node: full name */
+#define FDT_END_NODE 0x2 /* End node */
+#define FDT_PROP 0x3 /* Property: name off,
+ size, content */
+#define FDT_NOP 0x4 /* nop */
+#define FDT_END 0x9
+
+#define FDT_V1_SIZE (7*sizeof(uint32_t))
+#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(uint32_t))
+#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(uint32_t))
+#define FDT_V16_SIZE FDT_V3_SIZE
+#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t))
+
+#endif /* _FDT_H */
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _fdt_nodename_eq(const void *fdt, int offset,
+ const char *s, int len)
+{
+ const char *p = fdt_offset_ptr(fdt, offset + FDT_TAGSIZE, len+1);
+
+ if (! p)
+ /* short match */
+ return 0;
+
+ if (memcmp(p, s, len) != 0)
+ return 0;
+
+ if (p[len] == '\0')
+ return 1;
+ else if (!memchr(s, '@', len) && (p[len] == '@'))
+ return 1;
+ else
+ return 0;
+}
+
+const char *fdt_string(const void *fdt, int stroffset)
+{
+ return (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset;
+}
+
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size)
+{
+ FDT_CHECK_HEADER(fdt);
+ *address = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->address);
+ *size = fdt64_to_cpu(_fdt_mem_rsv(fdt, n)->size);
+ return 0;
+}
+
+int fdt_num_mem_rsv(const void *fdt)
+{
+ int i = 0;
+
+ while (fdt64_to_cpu(_fdt_mem_rsv(fdt, i)->size) != 0)
+ i++;
+ return i;
+}
+
+int fdt_subnode_offset_namelen(const void *fdt, int offset,
+ const char *name, int namelen)
+{
+ int depth;
+
+ FDT_CHECK_HEADER(fdt);
+
+ for (depth = 0, offset = fdt_next_node(fdt, offset, &depth);
+ (offset >= 0) && (depth > 0);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth < 0)
+ return -FDT_ERR_NOTFOUND;
+ else if ((depth == 1)
+ && _fdt_nodename_eq(fdt, offset, name, namelen))
+ return offset;
+ }
+
+ if (offset < 0)
+ return offset; /* error */
+ else
+ return -FDT_ERR_NOTFOUND;
+}
+
+int fdt_subnode_offset(const void *fdt, int parentoffset,
+ const char *name)
+{
+ return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_path_offset(const void *fdt, const char *path)
+{
+ const char *end = path + strlen(path);
+ const char *p = path;
+ int offset = 0;
+
+ FDT_CHECK_HEADER(fdt);
+
+ if (*path != '/')
+ return -FDT_ERR_BADPATH;
+
+ while (*p) {
+ const char *q;
+
+ while (*p == '/')
+ p++;
+ if (! *p)
+ return offset;
+ q = strchr(p, '/');
+ if (! q)
+ q = end;
+
+ offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p);
+ if (offset < 0)
+ return offset;
+
+ p = q;
+ }
+
+ return offset;
+}
+
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *len)
+{
+ const struct fdt_node_header *nh = _fdt_offset_ptr(fdt, nodeoffset);
+ int err;
+
+ if (((err = fdt_check_header(fdt)) != 0)
+ || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+ goto fail;
+
+ if (len)
+ *len = strlen(nh->name);
+
+ return nh->name;
+
+ fail:
+ if (len)
+ *len = err;
+ return NULL;
+}
+
+const struct fdt_property *fdt_get_property(const void *fdt,
+ int nodeoffset,
+ const char *name, int *lenp)
+{
+ uint32_t tag;
+ const struct fdt_property *prop;
+ int namestroff;
+ int offset, nextoffset;
+ int err;
+
+ if (((err = fdt_check_header(fdt)) != 0)
+ || ((err = _fdt_check_node_offset(fdt, nodeoffset)) < 0))
+ goto fail;
+
+ nextoffset = err;
+ do {
+ offset = nextoffset;
+
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+ switch (tag) {
+ case FDT_END:
+ err = -FDT_ERR_TRUNCATED;
+ goto fail;
+
+ case FDT_BEGIN_NODE:
+ case FDT_END_NODE:
+ case FDT_NOP:
+ break;
+
+ case FDT_PROP:
+ err = -FDT_ERR_BADSTRUCTURE;
+ prop = fdt_offset_ptr(fdt, offset, sizeof(*prop));
+ if (! prop)
+ goto fail;
+ namestroff = fdt32_to_cpu(prop->nameoff);
+ if (strcmp(fdt_string(fdt, namestroff), name) == 0) {
+ /* Found it! */
+ int len = fdt32_to_cpu(prop->len);
+ prop = fdt_offset_ptr(fdt, offset,
+ sizeof(*prop)+len);
+ if (! prop)
+ goto fail;
+
+ if (lenp)
+ *lenp = len;
+
+ return prop;
+ }
+ break;
+
+ default:
+ err = -FDT_ERR_BADSTRUCTURE;
+ goto fail;
+ }
+ } while ((tag != FDT_BEGIN_NODE) && (tag != FDT_END_NODE));
+
+ err = -FDT_ERR_NOTFOUND;
+ fail:
+ if (lenp)
+ *lenp = err;
+ return NULL;
+}
+
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+ const char *name, int *lenp)
+{
+ const struct fdt_property *prop;
+
+ prop = fdt_get_property(fdt, nodeoffset, name, lenp);
+ if (! prop)
+ return NULL;
+
+ return prop->data;
+}
+
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
+{
+ const uint32_t *php;
+ int len;
+
+ php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len);
+ if (!php || (len != sizeof(*php)))
+ return 0;
+
+ return fdt32_to_cpu(*php);
+}
+
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
+{
+ int pdepth = 0, p = 0;
+ int offset, depth, namelen;
+ const char *name;
+
+ FDT_CHECK_HEADER(fdt);
+
+ if (buflen < 2)
+ return -FDT_ERR_NOSPACE;
+
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (pdepth < depth)
+ continue; /* overflowed buffer */
+
+ while (pdepth > depth) {
+ do {
+ p--;
+ } while (buf[p-1] != '/');
+ pdepth--;
+ }
+
+ name = fdt_get_name(fdt, offset, &namelen);
+ if (!name)
+ return namelen;
+ if ((p + namelen + 1) <= buflen) {
+ memcpy(buf + p, name, namelen);
+ p += namelen;
+ buf[p++] = '/';
+ pdepth++;
+ }
+
+ if (offset == nodeoffset) {
+ if (pdepth < (depth + 1))
+ return -FDT_ERR_NOSPACE;
+
+ if (p > 1) /* special case so that root path is "/", not "" */
+ p--;
+ buf[p] = '\0';
+ return p;
+ }
+ }
+
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+ int supernodedepth, int *nodedepth)
+{
+ int offset, depth;
+ int supernodeoffset = -FDT_ERR_INTERNAL;
+
+ FDT_CHECK_HEADER(fdt);
+
+ if (supernodedepth < 0)
+ return -FDT_ERR_NOTFOUND;
+
+ for (offset = 0, depth = 0;
+ (offset >= 0) && (offset <= nodeoffset);
+ offset = fdt_next_node(fdt, offset, &depth)) {
+ if (depth == supernodedepth)
+ supernodeoffset = offset;
+
+ if (offset == nodeoffset) {
+ if (nodedepth)
+ *nodedepth = depth;
+
+ if (supernodedepth > depth)
+ return -FDT_ERR_NOTFOUND;
+ else
+ return supernodeoffset;
+ }
+ }
+
+ if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0))
+ return -FDT_ERR_BADOFFSET;
+ else if (offset == -FDT_ERR_BADOFFSET)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_node_depth(const void *fdt, int nodeoffset)
+{
+ int nodedepth;
+ int err;
+
+ err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth);
+ if (err)
+ return (err < 0) ? err : -FDT_ERR_INTERNAL;
+ return nodedepth;
+}
+
+int fdt_parent_offset(const void *fdt, int nodeoffset)
+{
+ int nodedepth = fdt_node_depth(fdt, nodeoffset);
+
+ if (nodedepth < 0)
+ return nodedepth;
+ return fdt_supernode_atdepth_offset(fdt, nodeoffset,
+ nodedepth - 1, NULL);
+}
+
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+ const char *propname,
+ const void *propval, int proplen)
+{
+ int offset;
+ const void *val;
+ int len;
+
+ FDT_CHECK_HEADER(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we scan each
+ * property of a node in fdt_getprop(), then if that didn't
+ * find what we want, we scan over them again making our way
+ * to the next node. Still it's the easiest to implement
+ * approach; performance can come later. */
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ val = fdt_getprop(fdt, offset, propname, &len);
+ if (val && (len == proplen)
+ && (memcmp(val, propval, len) == 0))
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
+
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle)
+{
+ if ((phandle == 0) || (phandle == -1))
+ return -FDT_ERR_BADPHANDLE;
+ phandle = cpu_to_fdt32(phandle);
+ return fdt_node_offset_by_prop_value(fdt, -1, "linux,phandle",
+ &phandle, sizeof(phandle));
+}
+
+int _stringlist_contains(const char *strlist, int listlen, const char *str)
+{
+ int len = strlen(str);
+ const char *p;
+
+ while (listlen >= len) {
+ if (memcmp(str, strlist, len+1) == 0)
+ return 1;
+ p = memchr(strlist, '\0', listlen);
+ if (!p)
+ return 0; /* malformed strlist.. */
+ listlen -= (p-strlist) + 1;
+ strlist = p + 1;
+ }
+ return 0;
+}
+
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+ const char *compatible)
+{
+ const void *prop;
+ int len;
+
+ prop = fdt_getprop(fdt, nodeoffset, "compatible", &len);
+ if (!prop)
+ return len;
+ if (_stringlist_contains(prop, len, compatible))
+ return 0;
+ else
+ return 1;
+}
+
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+ const char *compatible)
+{
+ int offset, err;
+
+ FDT_CHECK_HEADER(fdt);
+
+ /* FIXME: The algorithm here is pretty horrible: we scan each
+ * property of a node in fdt_node_check_compatible(), then if
+ * that didn't find what we want, we scan over them again
+ * making our way to the next node. Still it's the easiest to
+ * implement approach; performance can come later. */
+ for (offset = fdt_next_node(fdt, startoffset, NULL);
+ offset >= 0;
+ offset = fdt_next_node(fdt, offset, NULL)) {
+ err = fdt_node_check_compatible(fdt, offset, compatible);
+ if ((err < 0) && (err != -FDT_ERR_NOTFOUND))
+ return err;
+ else if (err == 0)
+ return offset;
+ }
+
+ return offset; /* error from fdt_next_node() */
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _fdt_blocks_misordered(const void *fdt,
+ int mem_rsv_size, int struct_size)
+{
+ return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8))
+ || (fdt_off_dt_struct(fdt) <
+ (fdt_off_mem_rsvmap(fdt) + mem_rsv_size))
+ || (fdt_off_dt_strings(fdt) <
+ (fdt_off_dt_struct(fdt) + struct_size))
+ || (fdt_totalsize(fdt) <
+ (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt)));
+}
+
+static int _fdt_rw_check_header(void *fdt)
+{
+ FDT_CHECK_HEADER(fdt);
+
+ if (fdt_version(fdt) < 17)
+ return -FDT_ERR_BADVERSION;
+ if (_fdt_blocks_misordered(fdt, sizeof(struct fdt_reserve_entry),
+ fdt_size_dt_struct(fdt)))
+ return -FDT_ERR_BADLAYOUT;
+ if (fdt_version(fdt) > 17)
+ fdt_set_version(fdt, 17);
+
+ return 0;
+}
+
+#define FDT_RW_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = _fdt_rw_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+static inline int _fdt_data_size(void *fdt)
+{
+ return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+}
+
+static int _fdt_splice(void *fdt, void *splicepoint, int oldlen, int newlen)
+{
+ char *p = splicepoint;
+ char *end = (char *)fdt + _fdt_data_size(fdt);
+
+ if (((p + oldlen) < p) || ((p + oldlen) > end))
+ return -FDT_ERR_BADOFFSET;
+ if ((end - oldlen + newlen) > ((char *)fdt + fdt_totalsize(fdt)))
+ return -FDT_ERR_NOSPACE;
+ memmove(p + newlen, p + oldlen, end - p - oldlen);
+ return 0;
+}
+
+static int _fdt_splice_mem_rsv(void *fdt, struct fdt_reserve_entry *p,
+ int oldn, int newn)
+{
+ int delta = (newn - oldn) * sizeof(*p);
+ int err;
+ err = _fdt_splice(fdt, p, oldn * sizeof(*p), newn * sizeof(*p));
+ if (err)
+ return err;
+ fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta);
+ fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+ return 0;
+}
+
+static int _fdt_splice_struct(void *fdt, void *p,
+ int oldlen, int newlen)
+{
+ int delta = newlen - oldlen;
+ int err;
+
+ if ((err = _fdt_splice(fdt, p, oldlen, newlen)))
+ return err;
+
+ fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta);
+ fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta);
+ return 0;
+}
+
+static int _fdt_splice_string(void *fdt, int newlen)
+{
+ void *p = (char *)fdt
+ + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt);
+ int err;
+
+ if ((err = _fdt_splice(fdt, p, 0, newlen)))
+ return err;
+
+ fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen);
+ return 0;
+}
+
+static int _fdt_find_add_string(void *fdt, const char *s)
+{
+ char *strtab = (char *)fdt + fdt_off_dt_strings(fdt);
+ const char *p;
+ char *new;
+ int len = strlen(s) + 1;
+ int err;
+
+ p = _fdt_find_string(strtab, fdt_size_dt_strings(fdt), s);
+ if (p)
+ /* found it */
+ return (p - strtab);
+
+ new = strtab + fdt_size_dt_strings(fdt);
+ err = _fdt_splice_string(fdt, len);
+ if (err)
+ return err;
+
+ memcpy(new, s, len);
+ return (new - strtab);
+}
+
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ re = _fdt_mem_rsv_w(fdt, fdt_num_mem_rsv(fdt));
+ err = _fdt_splice_mem_rsv(fdt, re, 0, 1);
+ if (err)
+ return err;
+
+ re->address = cpu_to_fdt64(address);
+ re->size = cpu_to_fdt64(size);
+ return 0;
+}
+
+int fdt_del_mem_rsv(void *fdt, int n)
+{
+ struct fdt_reserve_entry *re = _fdt_mem_rsv_w(fdt, n);
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ if (n >= fdt_num_mem_rsv(fdt))
+ return -FDT_ERR_NOTFOUND;
+
+ err = _fdt_splice_mem_rsv(fdt, re, 1, 0);
+ if (err)
+ return err;
+ return 0;
+}
+
+static int _fdt_resize_property(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
+{
+ int oldlen;
+ int err;
+
+ *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+ if (! (*prop))
+ return oldlen;
+
+ if ((err = _fdt_splice_struct(fdt, (*prop)->data, FDT_TAGALIGN(oldlen),
+ FDT_TAGALIGN(len))))
+ return err;
+
+ (*prop)->len = cpu_to_fdt32(len);
+ return 0;
+}
+
+static int _fdt_add_property(void *fdt, int nodeoffset, const char *name,
+ int len, struct fdt_property **prop)
+{
+ int proplen;
+ int nextoffset;
+ int namestroff;
+ int err;
+
+ if ((nextoffset = _fdt_check_node_offset(fdt, nodeoffset)) < 0)
+ return nextoffset;
+
+ namestroff = _fdt_find_add_string(fdt, name);
+ if (namestroff < 0)
+ return namestroff;
+
+ *prop = _fdt_offset_ptr_w(fdt, nextoffset);
+ proplen = sizeof(**prop) + FDT_TAGALIGN(len);
+
+ err = _fdt_splice_struct(fdt, *prop, 0, proplen);
+ if (err)
+ return err;
+
+ (*prop)->tag = cpu_to_fdt32(FDT_PROP);
+ (*prop)->nameoff = cpu_to_fdt32(namestroff);
+ (*prop)->len = cpu_to_fdt32(len);
+ return 0;
+}
+
+int fdt_set_name(void *fdt, int nodeoffset, const char *name)
+{
+ char *namep;
+ int oldlen, newlen;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen);
+ if (!namep)
+ return oldlen;
+
+ newlen = strlen(name);
+
+ err = _fdt_splice_struct(fdt, namep, FDT_TAGALIGN(oldlen+1),
+ FDT_TAGALIGN(newlen+1));
+ if (err)
+ return err;
+
+ memcpy(namep, name, newlen+1);
+ return 0;
+}
+
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ struct fdt_property *prop;
+ int err;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ err = _fdt_resize_property(fdt, nodeoffset, name, len, &prop);
+ if (err == -FDT_ERR_NOTFOUND)
+ err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
+ if (err)
+ return err;
+
+ memcpy(prop->data, val, len);
+ return 0;
+}
+
+int fdt_delprop(void *fdt, int nodeoffset, const char *name)
+{
+ struct fdt_property *prop;
+ int len, proplen;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+ if (! prop)
+ return len;
+
+ proplen = sizeof(*prop) + FDT_TAGALIGN(len);
+ return _fdt_splice_struct(fdt, prop, proplen, 0);
+}
+
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+ const char *name, int namelen)
+{
+ struct fdt_node_header *nh;
+ int offset, nextoffset;
+ int nodelen;
+ int err;
+ uint32_t tag;
+ uint32_t *endtag;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen);
+ if (offset >= 0)
+ return -FDT_ERR_EXISTS;
+ else if (offset != -FDT_ERR_NOTFOUND)
+ return offset;
+
+ /* Try to place the new node after the parent's properties */
+ fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+ } while ((tag == FDT_PROP) || (tag == FDT_NOP));
+
+ nh = _fdt_offset_ptr_w(fdt, offset);
+ nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE;
+
+ err = _fdt_splice_struct(fdt, nh, 0, nodelen);
+ if (err)
+ return err;
+
+ nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+ memset(nh->name, 0, FDT_TAGALIGN(namelen+1));
+ memcpy(nh->name, name, namelen);
+ endtag = (uint32_t *)((char *)nh + nodelen - FDT_TAGSIZE);
+ *endtag = cpu_to_fdt32(FDT_END_NODE);
+
+ return offset;
+}
+
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name)
+{
+ return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name));
+}
+
+int fdt_del_node(void *fdt, int nodeoffset)
+{
+ int endoffset;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ endoffset = _fdt_node_end_offset(fdt, nodeoffset);
+ if (endoffset < 0)
+ return endoffset;
+
+ return _fdt_splice_struct(fdt, _fdt_offset_ptr_w(fdt, nodeoffset),
+ endoffset - nodeoffset, 0);
+}
+
+static void _fdt_packblocks(const char *old, char *new,
+ int mem_rsv_size, int struct_size)
+{
+ int mem_rsv_off, struct_off, strings_off;
+
+ mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8);
+ struct_off = mem_rsv_off + mem_rsv_size;
+ strings_off = struct_off + struct_size;
+
+ memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size);
+ fdt_set_off_mem_rsvmap(new, mem_rsv_off);
+
+ memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size);
+ fdt_set_off_dt_struct(new, struct_off);
+ fdt_set_size_dt_struct(new, struct_size);
+
+ memmove(new + strings_off, old + fdt_off_dt_strings(old),
+ fdt_size_dt_strings(old));
+ fdt_set_off_dt_strings(new, strings_off);
+ fdt_set_size_dt_strings(new, fdt_size_dt_strings(old));
+}
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize)
+{
+ int err;
+ int mem_rsv_size, struct_size;
+ int newsize;
+ const char *fdtstart = fdt;
+ const char *fdtend = fdtstart + fdt_totalsize(fdt);
+ char *tmp;
+
+ FDT_CHECK_HEADER(fdt);
+
+ mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+ * sizeof(struct fdt_reserve_entry);
+
+ if (fdt_version(fdt) >= 17) {
+ struct_size = fdt_size_dt_struct(fdt);
+ } else {
+ struct_size = 0;
+ while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END)
+ ;
+ }
+
+ if (!_fdt_blocks_misordered(fdt, mem_rsv_size, struct_size)) {
+ /* no further work necessary */
+ err = fdt_move(fdt, buf, bufsize);
+ if (err)
+ return err;
+ fdt_set_version(buf, 17);
+ fdt_set_size_dt_struct(buf, struct_size);
+ fdt_set_totalsize(buf, bufsize);
+ return 0;
+ }
+
+ /* Need to reorder */
+ newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size
+ + struct_size + fdt_size_dt_strings(fdt);
+
+ if (bufsize < newsize)
+ return -FDT_ERR_NOSPACE;
+
+ /* First attempt to build converted tree at beginning of buffer */
+ tmp = buf;
+ /* But if that overlaps with the old tree... */
+ if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) {
+ /* Try right after the old tree instead */
+ tmp = (char *)(uintptr_t)fdtend;
+ if ((tmp + newsize) > ((char *)buf + bufsize))
+ return -FDT_ERR_NOSPACE;
+ }
+
+ _fdt_packblocks(fdt, tmp, mem_rsv_size, struct_size);
+ memmove(buf, tmp, newsize);
+
+ fdt_set_magic(buf, FDT_MAGIC);
+ fdt_set_totalsize(buf, bufsize);
+ fdt_set_version(buf, 17);
+ fdt_set_last_comp_version(buf, 16);
+ fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt));
+
+ return 0;
+}
+
+int fdt_pack(void *fdt)
+{
+ int mem_rsv_size;
+
+ FDT_RW_CHECK_HEADER(fdt);
+
+ mem_rsv_size = (fdt_num_mem_rsv(fdt)+1)
+ * sizeof(struct fdt_reserve_entry);
+ _fdt_packblocks(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt));
+ fdt_set_totalsize(fdt, _fdt_data_size(fdt));
+
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+struct fdt_errtabent {
+ const char *str;
+};
+
+#define FDT_ERRTABENT(val) \
+ [(val)] = { .str = #val, }
+
+static struct fdt_errtabent fdt_errtable[] = {
+ FDT_ERRTABENT(FDT_ERR_NOTFOUND),
+ FDT_ERRTABENT(FDT_ERR_EXISTS),
+ FDT_ERRTABENT(FDT_ERR_NOSPACE),
+
+ FDT_ERRTABENT(FDT_ERR_BADOFFSET),
+ FDT_ERRTABENT(FDT_ERR_BADPATH),
+ FDT_ERRTABENT(FDT_ERR_BADSTATE),
+
+ FDT_ERRTABENT(FDT_ERR_TRUNCATED),
+ FDT_ERRTABENT(FDT_ERR_BADMAGIC),
+ FDT_ERRTABENT(FDT_ERR_BADVERSION),
+ FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE),
+ FDT_ERRTABENT(FDT_ERR_BADLAYOUT),
+};
+#define FDT_ERRTABSIZE (sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))
+
+const char *fdt_strerror(int errval)
+{
+ if (errval > 0)
+ return "<valid offset/length>";
+ else if (errval == 0)
+ return "<no error>";
+ else if (errval > -FDT_ERRTABSIZE) {
+ const char *s = fdt_errtable[-errval].str;
+
+ if (s)
+ return s;
+ }
+
+ return "<unknown error>";
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+static int _fdt_sw_check_header(void *fdt)
+{
+ if (fdt_magic(fdt) != FDT_SW_MAGIC)
+ return -FDT_ERR_BADMAGIC;
+ /* FIXME: should check more details about the header state */
+ return 0;
+}
+
+#define FDT_SW_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = _fdt_sw_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+static void *_fdt_grab_space(void *fdt, int len)
+{
+ int offset = fdt_size_dt_struct(fdt);
+ int spaceleft;
+
+ spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt)
+ - fdt_size_dt_strings(fdt);
+
+ if ((offset + len < offset) || (offset + len > spaceleft))
+ return NULL;
+
+ fdt_set_size_dt_struct(fdt, offset + len);
+ return fdt_offset_ptr_w(fdt, offset, len);
+}
+
+int fdt_create(void *buf, int bufsize)
+{
+ void *fdt = buf;
+
+ if (bufsize < sizeof(struct fdt_header))
+ return -FDT_ERR_NOSPACE;
+
+ memset(buf, 0, bufsize);
+
+ fdt_set_magic(fdt, FDT_SW_MAGIC);
+ fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION);
+ fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION);
+ fdt_set_totalsize(fdt, bufsize);
+
+ fdt_set_off_mem_rsvmap(fdt, FDT_ALIGN(sizeof(struct fdt_header),
+ sizeof(struct fdt_reserve_entry)));
+ fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt));
+ fdt_set_off_dt_strings(fdt, bufsize);
+
+ return 0;
+}
+
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size)
+{
+ struct fdt_reserve_entry *re;
+ int offset;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ if (fdt_size_dt_struct(fdt))
+ return -FDT_ERR_BADSTATE;
+
+ offset = fdt_off_dt_struct(fdt);
+ if ((offset + sizeof(*re)) > fdt_totalsize(fdt))
+ return -FDT_ERR_NOSPACE;
+
+ re = (struct fdt_reserve_entry *)((char *)fdt + offset);
+ re->address = cpu_to_fdt64(addr);
+ re->size = cpu_to_fdt64(size);
+
+ fdt_set_off_dt_struct(fdt, offset + sizeof(*re));
+
+ return 0;
+}
+
+int fdt_finish_reservemap(void *fdt)
+{
+ return fdt_add_reservemap_entry(fdt, 0, 0);
+}
+
+int fdt_begin_node(void *fdt, const char *name)
+{
+ struct fdt_node_header *nh;
+ int namelen = strlen(name) + 1;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ nh = _fdt_grab_space(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen));
+ if (! nh)
+ return -FDT_ERR_NOSPACE;
+
+ nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE);
+ memcpy(nh->name, name, namelen);
+ return 0;
+}
+
+int fdt_end_node(void *fdt)
+{
+ uint32_t *en;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ en = _fdt_grab_space(fdt, FDT_TAGSIZE);
+ if (! en)
+ return -FDT_ERR_NOSPACE;
+
+ *en = cpu_to_fdt32(FDT_END_NODE);
+ return 0;
+}
+
+static int _fdt_find_add_string(void *fdt, const char *s)
+{
+ char *strtab = (char *)fdt + fdt_totalsize(fdt);
+ const char *p;
+ int strtabsize = fdt_size_dt_strings(fdt);
+ int len = strlen(s) + 1;
+ int struct_top, offset;
+
+ p = _fdt_find_string(strtab - strtabsize, strtabsize, s);
+ if (p)
+ return p - strtab;
+
+ /* Add it */
+ offset = -strtabsize - len;
+ struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ if (fdt_totalsize(fdt) + offset < struct_top)
+ return 0; /* no more room :( */
+
+ memcpy(strtab + offset, s, len);
+ fdt_set_size_dt_strings(fdt, strtabsize + len);
+ return offset;
+}
+
+int fdt_property(void *fdt, const char *name, const void *val, int len)
+{
+ struct fdt_property *prop;
+ int nameoff;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ nameoff = _fdt_find_add_string(fdt, name);
+ if (nameoff == 0)
+ return -FDT_ERR_NOSPACE;
+
+ prop = _fdt_grab_space(fdt, sizeof(*prop) + FDT_TAGALIGN(len));
+ if (! prop)
+ return -FDT_ERR_NOSPACE;
+
+ prop->tag = cpu_to_fdt32(FDT_PROP);
+ prop->nameoff = cpu_to_fdt32(nameoff);
+ prop->len = cpu_to_fdt32(len);
+ memcpy(prop->data, val, len);
+ return 0;
+}
+
+int fdt_finish(void *fdt)
+{
+ char *p = (char *)fdt;
+ uint32_t *end;
+ int oldstroffset, newstroffset;
+ uint32_t tag;
+ int offset, nextoffset;
+
+ FDT_SW_CHECK_HEADER(fdt);
+
+ /* Add terminator */
+ end = _fdt_grab_space(fdt, sizeof(*end));
+ if (! end)
+ return -FDT_ERR_NOSPACE;
+ *end = cpu_to_fdt32(FDT_END);
+
+ /* Relocate the string table */
+ oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt);
+ newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt);
+ memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt));
+ fdt_set_off_dt_strings(fdt, newstroffset);
+
+ /* Walk the structure, correcting string offsets */
+ offset = 0;
+ while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) {
+ if (tag == FDT_PROP) {
+ struct fdt_property *prop =
+ fdt_offset_ptr_w(fdt, offset, sizeof(*prop));
+ int nameoff;
+
+ if (! prop)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ nameoff = fdt32_to_cpu(prop->nameoff);
+ nameoff += fdt_size_dt_strings(fdt);
+ prop->nameoff = cpu_to_fdt32(nameoff);
+ }
+ offset = nextoffset;
+ }
+
+ /* Finally, adjust the header */
+ fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt));
+ fdt_set_magic(fdt, FDT_MAGIC);
+ return 0;
+}
--- /dev/null
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len)
+{
+ void *propval;
+ int proplen;
+
+ propval = fdt_getprop_w(fdt, nodeoffset, name, &proplen);
+ if (! propval)
+ return proplen;
+
+ if (proplen != len)
+ return -FDT_ERR_NOSPACE;
+
+ memcpy(propval, val, len);
+ return 0;
+}
+
+static void _fdt_nop_region(void *start, int len)
+{
+ uint32_t *p;
+
+ for (p = start; (char *)p < ((char *)start + len); p++)
+ *p = cpu_to_fdt32(FDT_NOP);
+}
+
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name)
+{
+ struct fdt_property *prop;
+ int len;
+
+ prop = fdt_get_property_w(fdt, nodeoffset, name, &len);
+ if (! prop)
+ return len;
+
+ _fdt_nop_region(prop, len + sizeof(*prop));
+
+ return 0;
+}
+
+int _fdt_node_end_offset(void *fdt, int nodeoffset)
+{
+ int level = 0;
+ uint32_t tag;
+ int offset, nextoffset;
+
+ tag = fdt_next_tag(fdt, nodeoffset, &nextoffset);
+ if (tag != FDT_BEGIN_NODE)
+ return -FDT_ERR_BADOFFSET;
+ do {
+ offset = nextoffset;
+ tag = fdt_next_tag(fdt, offset, &nextoffset);
+
+ switch (tag) {
+ case FDT_END:
+ return offset;
+
+ case FDT_BEGIN_NODE:
+ level++;
+ break;
+
+ case FDT_END_NODE:
+ level--;
+ break;
+
+ case FDT_PROP:
+ case FDT_NOP:
+ break;
+
+ default:
+ return -FDT_ERR_BADSTRUCTURE;
+ }
+ } while (level >= 0);
+
+ return nextoffset;
+}
+
+int fdt_nop_node(void *fdt, int nodeoffset)
+{
+ int endoffset;
+
+ endoffset = _fdt_node_end_offset(fdt, nodeoffset);
+ if (endoffset < 0)
+ return endoffset;
+
+ _fdt_nop_region(fdt_offset_ptr_w(fdt, nodeoffset, 0),
+ endoffset - nodeoffset);
+ return 0;
+}
--- /dev/null
+#ifndef _LIBFDT_H
+#define _LIBFDT_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <libfdt_env.h>
+#include <fdt.h>
+
+#define FDT_FIRST_SUPPORTED_VERSION 0x10
+#define FDT_LAST_SUPPORTED_VERSION 0x11
+
+/* Error codes: informative error codes */
+#define FDT_ERR_NOTFOUND 1
+ /* FDT_ERR_NOTFOUND: The requested node or property does not exist */
+#define FDT_ERR_EXISTS 2
+ /* FDT_ERR_EXISTS: Attemped to create a node or property which
+ * already exists */
+#define FDT_ERR_NOSPACE 3
+ /* FDT_ERR_NOSPACE: Operation needed to expand the device
+ * tree, but its buffer did not have sufficient space to
+ * contain the expanded tree. Use fdt_open_into() to move the
+ * device tree to a buffer with more space. */
+
+/* Error codes: codes for bad parameters */
+#define FDT_ERR_BADOFFSET 4
+ /* FDT_ERR_BADOFFSET: Function was passed a structure block
+ * offset which is out-of-bounds, or which points to an
+ * unsuitable part of the structure for the operation. */
+#define FDT_ERR_BADPATH 5
+ /* FDT_ERR_BADPATH: Function was passed a badly formatted path
+ * (e.g. missing a leading / for a function which requires an
+ * absolute path) */
+#define FDT_ERR_BADPHANDLE 6
+ /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle
+ * value. phandle values of 0 and -1 are not permitted. */
+#define FDT_ERR_BADSTATE 7
+ /* FDT_ERR_BADSTATE: Function was passed an incomplete device
+ * tree created by the sequential-write functions, which is
+ * not sufficiently complete for the requested operation. */
+
+/* Error codes: codes for bad device tree blobs */
+#define FDT_ERR_TRUNCATED 8
+ /* FDT_ERR_TRUNCATED: Structure block of the given device tree
+ * ends without an FDT_END tag. */
+#define FDT_ERR_BADMAGIC 9
+ /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a
+ * device tree at all - it is missing the flattened device
+ * tree magic number. */
+#define FDT_ERR_BADVERSION 10
+ /* FDT_ERR_BADVERSION: Given device tree has a version which
+ * can't be handled by the requested operation. For
+ * read-write functions, this may mean that fdt_open_into() is
+ * required to convert the tree to the expected version. */
+#define FDT_ERR_BADSTRUCTURE 11
+ /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt
+ * structure block or other serious error (e.g. misnested
+ * nodes, or subnodes preceding properties). */
+#define FDT_ERR_BADLAYOUT 12
+ /* FDT_ERR_BADLAYOUT: For read-write functions, the given
+ * device tree has it's sub-blocks in an order that the
+ * function can't handle (memory reserve map, then structure,
+ * then strings). Use fdt_open_into() to reorganize the tree
+ * into a form suitable for the read-write operations. */
+
+/* "Can't happen" error indicating a bug in libfdt */
+#define FDT_ERR_INTERNAL 13
+ /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion.
+ * Should never be returned, if it is, it indicates a bug in
+ * libfdt itself. */
+
+#define FDT_ERR_MAX 13
+
+/**********************************************************************/
+/* Low-level functions (you probably don't need these) */
+/**********************************************************************/
+
+const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
+{
+ return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
+}
+
+uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset);
+
+/**********************************************************************/
+/* Traversal functions */
+/**********************************************************************/
+
+int fdt_next_node(const void *fdt, int offset, int *depth);
+
+/**********************************************************************/
+/* General functions */
+/**********************************************************************/
+
+#define fdt_get_header(fdt, field) \
+ (fdt32_to_cpu(((const struct fdt_header *)(fdt))->field))
+#define fdt_magic(fdt) (fdt_get_header(fdt, magic))
+#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize))
+#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct))
+#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings))
+#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap))
+#define fdt_version(fdt) (fdt_get_header(fdt, version))
+#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version))
+#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys))
+#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings))
+#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct))
+
+#define __fdt_set_hdr(name) \
+ static inline void fdt_set_##name(void *fdt, uint32_t val) \
+ { \
+ struct fdt_header *fdth = fdt; \
+ fdth->name = cpu_to_fdt32(val); \
+ }
+__fdt_set_hdr(magic);
+__fdt_set_hdr(totalsize);
+__fdt_set_hdr(off_dt_struct);
+__fdt_set_hdr(off_dt_strings);
+__fdt_set_hdr(off_mem_rsvmap);
+__fdt_set_hdr(version);
+__fdt_set_hdr(last_comp_version);
+__fdt_set_hdr(boot_cpuid_phys);
+__fdt_set_hdr(size_dt_strings);
+__fdt_set_hdr(size_dt_struct);
+#undef __fdt_set_hdr
+
+/**
+ * fdt_check_header - sanity check a device tree or possible device tree
+ * @fdt: pointer to data which might be a flattened device tree
+ *
+ * fdt_check_header() checks that the given buffer contains what
+ * appears to be a flattened device tree with sane information in its
+ * header.
+ *
+ * returns:
+ * 0, if the buffer appears to contain a valid device tree
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings, as above
+ */
+int fdt_check_header(const void *fdt);
+
+/**
+ * fdt_move - move a device tree around in memory
+ * @fdt: pointer to the device tree to move
+ * @buf: pointer to memory where the device is to be moved
+ * @bufsize: size of the memory space at buf
+ *
+ * fdt_move() relocates, if possible, the device tree blob located at
+ * fdt to the buffer at buf of size bufsize. The buffer may overlap
+ * with the existing device tree blob at fdt. Therefore,
+ * fdt_move(fdt, fdt, fdt_totalsize(fdt))
+ * should always succeed.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_move(const void *fdt, void *buf, int bufsize);
+
+/**********************************************************************/
+/* Read-only functions */
+/**********************************************************************/
+
+/**
+ * fdt_string - retrieve a string from the strings block of a device tree
+ * @fdt: pointer to the device tree blob
+ * @stroffset: offset of the string within the strings block (native endian)
+ *
+ * fdt_string() retrieves a pointer to a single string from the
+ * strings block of the device tree blob at fdt.
+ *
+ * returns:
+ * a pointer to the string, on success
+ * NULL, if stroffset is out of bounds
+ */
+const char *fdt_string(const void *fdt, int stroffset);
+
+/**
+ * fdt_num_mem_rsv - retrieve the number of memory reserve map entries
+ * @fdt: pointer to the device tree blob
+ *
+ * Returns the number of entries in the device tree blob's memory
+ * reservation map. This does not include the terminating 0,0 entry
+ * or any other (0,0) entries reserved for expansion.
+ *
+ * returns:
+ * the number of entries
+ */
+int fdt_num_mem_rsv(const void *fdt);
+
+/**
+ * fdt_get_mem_rsv - retrieve one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: pointers to 64-bit variables
+ *
+ * On success, *address and *size will contain the address and size of
+ * the n-th reserve map entry from the device tree blob, in
+ * native-endian format.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size);
+
+/**
+ * fdt_subnode_offset_namelen - find a subnode based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_subnode_offset(), but only examine the first
+ * namelen characters of name for matching the subnode name. This is
+ * useful for finding subnodes based on a portion of a larger string,
+ * such as a full path.
+ */
+int fdt_subnode_offset_namelen(const void *fdt, int parentoffset,
+ const char *name, int namelen);
+/**
+ * fdt_subnode_offset - find a subnode of a given node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_subnode_offset() finds a subnode of the node at structure block
+ * offset parentoffset with the given name. name may include a unit
+ * address, in which case fdt_subnode_offset() will find the subnode
+ * with that unit address, or the unit address may be omitted, in
+ * which case fdt_subnode_offset() will find an arbitrary subnode
+ * whose name excluding unit address matches the given name.
+ *
+ * returns:
+ * structure block offset of the requested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_path_offset - find a tree node by its full path
+ * @fdt: pointer to the device tree blob
+ * @path: full path of the node to locate
+ *
+ * fdt_path_offset() finds a node of a given path in the device tree.
+ * Each path component may omit the unit address portion, but the
+ * results of this are undefined if any such path component is
+ * ambiguous (that is if there are multiple nodes at the relevant
+ * level matching the given component, differentiated only by unit
+ * address).
+ *
+ * returns:
+ * structure block offset of the node with the requested path (>=0), on success
+ * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid
+ * -FDT_ERR_NOTFOUND, if the requested node does not exist
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_path_offset(const void *fdt, const char *path);
+
+/**
+ * fdt_get_name - retrieve the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the starting node
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_name() retrieves the name (including unit address) of the
+ * device tree node at structure block offset nodeoffset. If lenp is
+ * non-NULL, the length of this name is also returned, in the integer
+ * pointed to by lenp.
+ *
+ * returns:
+ * pointer to the node's name, on success
+ * If lenp is non-NULL, *lenp contains the length of that name (>=0)
+ * NULL, on error
+ * if lenp is non-NULL *lenp contains an error code (<0):
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp);
+
+/**
+ * fdt_get_property - find a given property in a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_get_property() retrieves a pointer to the fdt_property
+ * structure within the device tree blob corresponding to the property
+ * named 'name' of the node at offset nodeoffset. If lenp is
+ * non-NULL, the length of the property value is also returned, in the
+ * integer pointed to by lenp.
+ *
+ * returns:
+ * pointer to the structure representing the property
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_NOTFOUND, node does not have named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset,
+ const char *name, int *lenp);
+static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset,
+ const char *name,
+ int *lenp)
+{
+ return (struct fdt_property *)(uintptr_t)
+ fdt_get_property(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_getprop - retrieve the value of a given property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to find
+ * @name: name of the property to find
+ * @lenp: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_getprop() retrieves a pointer to the value of the property
+ * named 'name' of the node at offset nodeoffset (this will be a
+ * pointer to within the device blob itself, not a copy of the value).
+ * If lenp is non-NULL, the length of the property value is also
+ * returned, in the integer pointed to by lenp.
+ *
+ * returns:
+ * pointer to the property's value
+ * if lenp is non-NULL, *lenp contains the length of the property
+ * value (>=0)
+ * NULL, on error
+ * if lenp is non-NULL, *lenp contains an error code (<0):
+ * -FDT_ERR_NOTFOUND, node does not have named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+const void *fdt_getprop(const void *fdt, int nodeoffset,
+ const char *name, int *lenp);
+static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
+ const char *name, int *lenp)
+{
+ return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp);
+}
+
+/**
+ * fdt_get_phandle - retrieve the phandle of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of the node
+ *
+ * fdt_get_phandle() retrieves the phandle of the device tree node at
+ * structure block offset nodeoffset.
+ *
+ * returns:
+ * the phandle of the node at nodeoffset, on success (!= 0, != -1)
+ * 0, if the node has no phandle, or another error occurs
+ */
+uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_get_path - determine the full path of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose path to find
+ * @buf: character buffer to contain the returned path (will be overwritten)
+ * @buflen: size of the character buffer at buf
+ *
+ * fdt_get_path() computes the full path of the node at offset
+ * nodeoffset, and records that path in the buffer at buf.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * 0, on success
+ * buf contains the absolute path of the node at
+ * nodeoffset, as a NUL-terminated string.
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1)
+ * characters and will not fit in the given buffer.
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen);
+
+/**
+ * fdt_supernode_atdepth_offset - find a specific ancestor of a node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ * @supernodedepth: depth of the ancestor to find
+ * @nodedepth: pointer to an integer variable (will be overwritten) or NULL
+ *
+ * fdt_supernode_atdepth_offset() finds an ancestor of the given node
+ * at a specific depth from the root (where the root itself has depth
+ * 0, its immediate subnodes depth 1 and so forth). So
+ * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL);
+ * will always return 0, the offset of the root node. If the node at
+ * nodeoffset has depth D, then:
+ * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL);
+ * will return nodeoffset itself.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+
+ * structure block offset of the node at node offset's ancestor
+ * of depth supernodedepth (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+* -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of nodeoffset
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset,
+ int supernodedepth, int *nodedepth);
+
+/**
+ * fdt_node_depth - find the depth of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_node_depth() finds the depth of a given node. The root node
+ * has depth 0, its immediate subnodes depth 1 and so forth.
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset.
+ *
+ * returns:
+ * depth of the node at nodeoffset (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_depth(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_parent_offset - find the parent of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose parent to find
+ *
+ * fdt_parent_offset() locates the parent node of a given node (that
+ * is, it finds the offset of the node which contains the node at
+ * nodeoffset as a subnode).
+ *
+ * NOTE: This function is expensive, as it must scan the device tree
+ * structure from the start to nodeoffset, *twice*.
+ *
+ * returns:
+ * structure block offset of the parent of the node at nodeoffset
+ * (>=0), on success
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_parent_offset(const void *fdt, int nodeoffset);
+
+/**
+ * fdt_node_offset_by_prop_value - find nodes with a given property value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @propname: property name to check
+ * @propval: property value to search for
+ * @proplen: length of the value in propval
+ *
+ * fdt_node_offset_by_prop_value() returns the offset of the first
+ * node after startoffset, which has a property named propname whose
+ * value is of length proplen and has value equal to propval; or if
+ * startoffset is -1, the very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ * offset = fdt_node_offset_by_prop_value(fdt, -1, propname,
+ * propval, proplen);
+ * while (offset != -FDT_ERR_NOTFOUND) {
+ * // other code here
+ * offset = fdt_node_offset_by_prop_value(fdt, offset, propname,
+ * propval, proplen);
+ * }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0, >startoffset),
+ * on success
+ * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ * tree after startoffset
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_prop_value(const void *fdt, int startoffset,
+ const char *propname,
+ const void *propval, int proplen);
+
+/**
+ * fdt_node_offset_by_phandle - find the node with a given phandle
+ * @fdt: pointer to the device tree blob
+ * @phandle: phandle value
+ *
+ * fdt_node_offset_by_phandle() returns the offset of the node
+ * which has the given phandle value. If there is more than one node
+ * in the tree with the given phandle (an invalid tree), results are
+ * undefined.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0), on success
+ * -FDT_ERR_NOTFOUND, no node with that phandle exists
+ * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle);
+
+/**
+ * fdt_node_check_compatible: check a node's compatible property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of a tree node
+ * @compatible: string to match against
+ *
+ *
+ * fdt_node_check_compatible() returns 0 if the given node contains a
+ * 'compatible' property with the given string as one of its elements,
+ * it returns non-zero otherwise, or on error.
+ *
+ * returns:
+ * 0, if the node has a 'compatible' property listing the given string
+ * 1, if the node has a 'compatible' property, but it does not list
+ * the given string
+ * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property
+ * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_check_compatible(const void *fdt, int nodeoffset,
+ const char *compatible);
+
+/**
+ * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value
+ * @fdt: pointer to the device tree blob
+ * @startoffset: only find nodes after this offset
+ * @compatible: 'compatible' string to match against
+ *
+ * fdt_node_offset_by_compatible() returns the offset of the first
+ * node after startoffset, which has a 'compatible' property which
+ * lists the given compatible string; or if startoffset is -1, the
+ * very first such node in the tree.
+ *
+ * To iterate through all nodes matching the criterion, the following
+ * idiom can be used:
+ * offset = fdt_node_offset_by_compatible(fdt, -1, compatible);
+ * while (offset != -FDT_ERR_NOTFOUND) {
+ * // other code here
+ * offset = fdt_node_offset_by_compatible(fdt, offset, compatible);
+ * }
+ *
+ * Note the -1 in the first call to the function, if 0 is used here
+ * instead, the function will never locate the root node, even if it
+ * matches the criterion.
+ *
+ * returns:
+ * structure block offset of the located node (>= 0, >startoffset),
+ * on success
+ * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the
+ * tree after startoffset
+ * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE, standard meanings
+ */
+int fdt_node_offset_by_compatible(const void *fdt, int startoffset,
+ const char *compatible);
+
+/**********************************************************************/
+/* Write-in-place functions */
+/**********************************************************************/
+
+/**
+ * fdt_setprop_inplace - change a property's value, but not its size
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to replace the property value with
+ * @len: length of the property value
+ *
+ * fdt_setprop_inplace() replaces the value of a given property with
+ * the data in val, of length len. This function cannot change the
+ * size of a property, and so will only work if len is equal to the
+ * current length of the property.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if len is not equal to the property's current length
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: cell (32-bit integer) value to replace the property with
+ *
+ * fdt_setprop_inplace_cell() replaces the value of a given property
+ * with the 32-bit integer cell value in val, converting val to
+ * big-endian if necessary. This function cannot change the size of a
+ * property, and so will only work if the property already exists and
+ * has length 4.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, if the property's length is not equal to 4
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+ const char *name, uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_nop_property - replace a property with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_nop_property() will replace a given property's representation
+ * in the blob with FDT_NOP tags, effectively removing it from the
+ * tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the property, and will not alter or move any other part of the
+ * tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_property(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_nop_node - replace a node (subtree) with nop tags
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_nop_node() will replace a given node's representation in the
+ * blob, including all its subnodes, if any, with FDT_NOP tags,
+ * effectively removing it from the tree.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the node and its properties and subnodes, and will not alter or
+ * move any other part of the tree.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_nop_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Sequential write functions */
+/**********************************************************************/
+
+int fdt_create(void *buf, int bufsize);
+int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size);
+int fdt_finish_reservemap(void *fdt);
+int fdt_begin_node(void *fdt, const char *name);
+int fdt_property(void *fdt, const char *name, const void *val, int len);
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_property(fdt, name, &val, sizeof(val));
+}
+#define fdt_property_string(fdt, name, str) \
+ fdt_property(fdt, name, str, strlen(str)+1)
+int fdt_end_node(void *fdt);
+int fdt_finish(void *fdt);
+
+/**********************************************************************/
+/* Read-write functions */
+/**********************************************************************/
+
+int fdt_open_into(const void *fdt, void *buf, int bufsize);
+int fdt_pack(void *fdt);
+
+/**
+ * fdt_add_mem_rsv - add one memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @address, @size: 64-bit values (native endian)
+ *
+ * Adds a reserve map entry to the given blob reserving a region at
+ * address address of length size.
+ *
+ * This function will insert data into the reserve map and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new reservation entry
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size);
+
+/**
+ * fdt_del_mem_rsv - remove a memory reserve map entry
+ * @fdt: pointer to the device tree blob
+ * @n: entry to remove
+ *
+ * fdt_del_mem_rsv() removes the n-th memory reserve map entry from
+ * the blob.
+ *
+ * This function will delete data from the reservation table and will
+ * therefore change the indexes of some entries in the table.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there
+ * are less than n+1 reserve map entries)
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_mem_rsv(void *fdt, int n);
+
+/**
+ * fdt_set_name - change the name of a given node
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: structure block offset of a node
+ * @name: name to give the node
+ *
+ * fdt_set_name() replaces the name (including unit address, if any)
+ * of the given node with the given string. NOTE: this function can't
+ * efficiently check if the new name is unique amongst the given
+ * node's siblings; results are undefined if this function is invoked
+ * with a name equal to one of the given node's siblings.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob
+ * to contain the new name
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE, standard meanings
+ */
+int fdt_set_name(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_setprop - create or change a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: pointer to data to set the property value to
+ * @len: length of the property value
+ *
+ * fdt_setprop() sets the value of the named property in the given
+ * node to the given value and length, creating the property if it
+ * does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_setprop(void *fdt, int nodeoffset, const char *name,
+ const void *val, int len);
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_cell() sets the value of the named property in the
+ * given node to the given cell value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+ uint32_t val)
+{
+ val = cpu_to_fdt32(val);
+ return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_setprop_string - set a property to a string value
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value for the property
+ *
+ * fdt_setprop_string() sets the value of the named property in the
+ * given node to the given string value (using the length of the
+ * string to determine the new length of the property), or creates a
+ * new property with that value if it does not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ * contain the new property value
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_setprop_string(fdt, nodeoffset, name, str) \
+ fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
+ * fdt_delprop - delete a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to nop
+ * @name: name of the property to nop
+ *
+ * fdt_del_property() will delete the given property.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_NOTFOUND, node does not have the named property
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_delprop(void *fdt, int nodeoffset, const char *name);
+
+/**
+ * fdt_add_subnode_namelen - creates a new node based on substring
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_add_subnode(), but use only the first namelen
+ * characters of name as the name of the new node. This is useful for
+ * creating subnodes based on a portion of a larger string, such as a
+ * full path.
+ */
+int fdt_add_subnode_namelen(void *fdt, int parentoffset,
+ const char *name, int namelen);
+
+/**
+ * fdt_add_subnode - creates a new node
+ * @fdt: pointer to the device tree blob
+ * @parentoffset: structure block offset of a node
+ * @name: name of the subnode to locate
+ *
+ * fdt_add_subnode() creates a new node as a subnode of the node at
+ * structure block offset parentoffset, with the given name (which
+ * should include the unit address, if any).
+ *
+ * This function will insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+
+ * returns:
+ * structure block offset of the created nodeequested subnode (>=0), on success
+ * -FDT_ERR_NOTFOUND, if the requested subnode does not exist
+ * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE tag
+ * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of
+ * the given name
+ * -FDT_ERR_NOSPACE, if there is insufficient free space in the
+ * blob to contain the new node
+ * -FDT_ERR_NOSPACE
+ * -FDT_ERR_BADLAYOUT
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings.
+ */
+int fdt_add_subnode(void *fdt, int parentoffset, const char *name);
+
+/**
+ * fdt_del_node - delete a node (subtree)
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node to nop
+ *
+ * fdt_del_node() will remove the given node, including all its
+ * subnodes if any, from the blob.
+ *
+ * This function will delete data from the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ * 0, on success
+ * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ * -FDT_ERR_BADLAYOUT,
+ * -FDT_ERR_BADMAGIC,
+ * -FDT_ERR_BADVERSION,
+ * -FDT_ERR_BADSTATE,
+ * -FDT_ERR_BADSTRUCTURE,
+ * -FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_del_node(void *fdt, int nodeoffset);
+
+/**********************************************************************/
+/* Debugging / informational functions */
+/**********************************************************************/
+
+const char *fdt_strerror(int errval);
+
+#endif /* _LIBFDT_H */
--- /dev/null
+#ifndef _LIBFDT_ENV_H
+#define _LIBFDT_ENV_H
+
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+
+#define _B(n) ((unsigned long long)((uint8_t *)&x)[n])
+static inline uint32_t fdt32_to_cpu(uint32_t x)
+{
+ return (_B(0) << 24) | (_B(1) << 16) | (_B(2) << 8) | _B(3);
+}
+#define cpu_to_fdt32(x) fdt32_to_cpu(x)
+
+static inline uint64_t fdt64_to_cpu(uint64_t x)
+{
+ return (_B(0) << 56) | (_B(1) << 48) | (_B(2) << 40) | (_B(3) << 32)
+ | (_B(4) << 24) | (_B(5) << 16) | (_B(6) << 8) | _B(7);
+}
+#define cpu_to_fdt64(x) fdt64_to_cpu(x)
+#undef _B
+
+#endif /* _LIBFDT_ENV_H */
--- /dev/null
+#ifndef _LIBFDT_INTERNAL_H
+#define _LIBFDT_INTERNAL_H
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2006 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ * b) Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <fdt.h>
+
+#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1))
+#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE))
+
+#define FDT_CHECK_HEADER(fdt) \
+ { \
+ int err; \
+ if ((err = fdt_check_header(fdt)) != 0) \
+ return err; \
+ }
+
+uint32_t _fdt_next_tag(const void *fdt, int startoffset, int *nextoffset);
+int _fdt_check_node_offset(const void *fdt, int offset);
+const char *_fdt_find_string(const char *strtab, int tabsize, const char *s);
+int _fdt_node_end_offset(void *fdt, int nodeoffset);
+
+static inline const void *_fdt_offset_ptr(const void *fdt, int offset)
+{
+ return (const char *)fdt + fdt_off_dt_struct(fdt) + offset;
+}
+
+static inline void *_fdt_offset_ptr_w(void *fdt, int offset)
+{
+ return (void *)(uintptr_t)_fdt_offset_ptr(fdt, offset);
+}
+
+static inline const struct fdt_reserve_entry *_fdt_mem_rsv(const void *fdt, int n)
+{
+ const struct fdt_reserve_entry *rsv_table =
+ (const struct fdt_reserve_entry *)
+ ((const char *)fdt + fdt_off_mem_rsvmap(fdt));
+
+ return rsv_table + n;
+}
+static inline struct fdt_reserve_entry *_fdt_mem_rsv_w(void *fdt, int n)
+{
+ return (void *)(uintptr_t)_fdt_mem_rsv(fdt, n);
+}
+
+#define FDT_SW_MAGIC (~FDT_MAGIC)
+
+#endif /* _LIBFDT_INTERNAL_H */
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+
+/*
+ * Tree building functions
+ */
+
+struct property *build_property(char *name, struct data val, char *label)
+{
+ struct property *new = xmalloc(sizeof(*new));
+
+ new->name = name;
+ new->val = val;
+
+ new->next = NULL;
+
+ new->label = label;
+
+ return new;
+}
+
+struct property *chain_property(struct property *first, struct property *list)
+{
+ assert(first->next == NULL);
+
+ first->next = list;
+ return first;
+}
+
+struct property *reverse_properties(struct property *first)
+{
+ struct property *p = first;
+ struct property *head = NULL;
+ struct property *next;
+
+ while (p) {
+ next = p->next;
+ p->next = head;
+ head = p;
+ p = next;
+ }
+ return head;
+}
+
+struct node *build_node(struct property *proplist, struct node *children)
+{
+ struct node *new = xmalloc(sizeof(*new));
+ struct node *child;
+
+ memset(new, 0, sizeof(*new));
+
+ new->proplist = reverse_properties(proplist);
+ new->children = children;
+
+ for_each_child(new, child) {
+ child->parent = new;
+ }
+
+ return new;
+}
+
+struct node *name_node(struct node *node, char *name, char * label)
+{
+ assert(node->name == NULL);
+
+ node->name = name;
+
+ node->label = label;
+
+ return node;
+}
+
+struct node *chain_node(struct node *first, struct node *list)
+{
+ assert(first->next_sibling == NULL);
+
+ first->next_sibling = list;
+ return first;
+}
+
+void add_property(struct node *node, struct property *prop)
+{
+ struct property **p;
+
+ prop->next = NULL;
+
+ p = &node->proplist;
+ while (*p)
+ p = &((*p)->next);
+
+ *p = prop;
+}
+
+void add_child(struct node *parent, struct node *child)
+{
+ struct node **p;
+
+ child->next_sibling = NULL;
+ child->parent = parent;
+
+ p = &parent->children;
+ while (*p)
+ p = &((*p)->next_sibling);
+
+ *p = child;
+}
+
+struct reserve_info *build_reserve_entry(uint64_t address, uint64_t size,
+ char *label)
+{
+ struct reserve_info *new = xmalloc(sizeof(*new));
+
+ new->re.address = address;
+ new->re.size = size;
+
+ new->next = NULL;
+
+ new->label = label;
+
+ return new;
+}
+
+struct reserve_info *chain_reserve_entry(struct reserve_info *first,
+ struct reserve_info *list)
+{
+ assert(first->next == NULL);
+
+ first->next = list;
+ return first;
+}
+
+struct reserve_info *add_reserve_entry(struct reserve_info *list,
+ struct reserve_info *new)
+{
+ struct reserve_info *last;
+
+ new->next = NULL;
+
+ if (! list)
+ return new;
+
+ for (last = list; last->next; last = last->next)
+ ;
+
+ last->next = new;
+
+ return list;
+}
+
+struct boot_info *build_boot_info(struct reserve_info *reservelist,
+ struct node *tree, uint32_t boot_cpuid_phys)
+{
+ struct boot_info *bi;
+
+ bi = xmalloc(sizeof(*bi));
+ bi->reservelist = reservelist;
+ bi->dt = tree;
+ bi->boot_cpuid_phys = boot_cpuid_phys;
+
+ return bi;
+}
+
+/*
+ * Tree accessor functions
+ */
+
+const char *get_unitname(struct node *node)
+{
+ if (node->name[node->basenamelen] == '\0')
+ return "";
+ else
+ return node->name + node->basenamelen + 1;
+}
+
+struct property *get_property(struct node *node, const char *propname)
+{
+ struct property *prop;
+
+ for_each_property(node, prop)
+ if (streq(prop->name, propname))
+ return prop;
+
+ return NULL;
+}
+
+cell_t propval_cell(struct property *prop)
+{
+ assert(prop->val.len == sizeof(cell_t));
+ return fdt32_to_cpu(*((cell_t *)prop->val.val));
+}
+
+struct node *get_subnode(struct node *node, const char *nodename)
+{
+ struct node *child;
+
+ for_each_child(node, child)
+ if (streq(child->name, nodename))
+ return child;
+
+ return NULL;
+}
+
+struct node *get_node_by_path(struct node *tree, const char *path)
+{
+ const char *p;
+ struct node *child;
+
+ if (!path || ! (*path))
+ return tree;
+
+ while (path[0] == '/')
+ path++;
+
+ p = strchr(path, '/');
+
+ for_each_child(tree, child) {
+ if (p && strneq(path, child->name, p-path))
+ return get_node_by_path(child, p+1);
+ else if (!p && streq(path, child->name))
+ return child;
+ }
+
+ return NULL;
+}
+
+struct node *get_node_by_label(struct node *tree, const char *label)
+{
+ struct node *child, *node;
+
+ assert(label && (strlen(label) > 0));
+
+ if (tree->label && streq(tree->label, label))
+ return tree;
+
+ for_each_child(tree, child) {
+ node = get_node_by_label(child, label);
+ if (node)
+ return node;
+ }
+
+ return NULL;
+}
+
+struct node *get_node_by_phandle(struct node *tree, cell_t phandle)
+{
+ struct node *child, *node;
+
+ assert((phandle != 0) && (phandle != -1));
+
+ if (tree->phandle == phandle)
+ return tree;
+
+ for_each_child(tree, child) {
+ node = get_node_by_phandle(child, phandle);
+ if (node)
+ return node;
+ }
+
+ return NULL;
+}
+
+struct node *get_node_by_ref(struct node *tree, const char *ref)
+{
+ if (ref[0] == '/')
+ return get_node_by_path(tree, ref);
+ else
+ return get_node_by_label(tree, ref);
+}
+
+cell_t get_node_phandle(struct node *root, struct node *node)
+{
+ static cell_t phandle = 1; /* FIXME: ick, static local */
+
+ if ((node->phandle != 0) && (node->phandle != -1))
+ return node->phandle;
+
+ assert(! get_property(node, "linux,phandle"));
+
+ while (get_node_by_phandle(root, phandle))
+ phandle++;
+
+ node->phandle = phandle;
+ add_property(node,
+ build_property("linux,phandle",
+ data_append_cell(empty_data, phandle),
+ NULL));
+
+ return node->phandle;
+}
--- /dev/null
+/*
+ * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+/*
+ * Like yylineno, this is the current open file pos.
+ */
+
+struct dtc_file *srcpos_file;
+
+static int dtc_open_one(struct dtc_file *file,
+ const char *search,
+ const char *fname)
+{
+ char *fullname;
+
+ if (search) {
+ fullname = xmalloc(strlen(search) + strlen(fname) + 2);
+
+ strcpy(fullname, search);
+ strcat(fullname, "/");
+ strcat(fullname, fname);
+ } else {
+ fullname = strdup(fname);
+ }
+
+ file->file = fopen(fullname, "r");
+ if (!file->file) {
+ free(fullname);
+ return 0;
+ }
+
+ file->name = fullname;
+ return 1;
+}
+
+
+struct dtc_file *dtc_open_file(const char *fname,
+ const struct search_path *search)
+{
+ static const struct search_path default_search = { NULL, NULL, NULL };
+
+ struct dtc_file *file;
+ const char *slash;
+
+ file = xmalloc(sizeof(struct dtc_file));
+
+ slash = strrchr(fname, '/');
+ if (slash) {
+ char *dir = xmalloc(slash - fname + 1);
+
+ memcpy(dir, fname, slash - fname);
+ dir[slash - fname] = 0;
+ file->dir = dir;
+ } else {
+ file->dir = NULL;
+ }
+
+ if (streq(fname, "-")) {
+ file->name = "stdin";
+ file->file = stdin;
+ return file;
+ }
+
+ if (fname[0] == '/') {
+ file->file = fopen(fname, "r");
+ if (!file->file)
+ goto fail;
+
+ file->name = strdup(fname);
+ return file;
+ }
+
+ if (!search)
+ search = &default_search;
+
+ while (search) {
+ if (dtc_open_one(file, search->dir, fname))
+ return file;
+
+ if (errno != ENOENT)
+ goto fail;
+
+ search = search->next;
+ }
+
+fail:
+ die("Couldn't open \"%s\": %s\n", fname, strerror(errno));
+}
+
+void dtc_close_file(struct dtc_file *file)
+{
+ if (fclose(file->file))
+ die("Error closing \"%s\": %s\n", file->name, strerror(errno));
+
+ free(file->dir);
+ free(file);
+}
--- /dev/null
+/*
+ * Copyright 2007 Jon Loeliger, Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+/*
+ * Augment the standard YYLTYPE with a filenum index into an
+ * array of all opened filenames.
+ */
+
+#include <stdio.h>
+
+struct dtc_file {
+ char *dir;
+ const char *name;
+ FILE *file;
+};
+
+#if ! defined(YYLTYPE) && ! defined(YYLTYPE_IS_DECLARED)
+typedef struct YYLTYPE {
+ int first_line;
+ int first_column;
+ int last_line;
+ int last_column;
+ struct dtc_file *file;
+} YYLTYPE;
+
+#define YYLTYPE_IS_DECLARED 1
+#define YYLTYPE_IS_TRIVIAL 1
+#endif
+
+/* Cater to old parser templates. */
+#ifndef YYID
+#define YYID(n) (n)
+#endif
+
+#define YYLLOC_DEFAULT(Current, Rhs, N) \
+ do \
+ if (YYID (N)) \
+ { \
+ (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \
+ (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \
+ (Current).last_line = YYRHSLOC (Rhs, N).last_line; \
+ (Current).last_column = YYRHSLOC (Rhs, N).last_column; \
+ (Current).file = YYRHSLOC (Rhs, N).file; \
+ } \
+ else \
+ { \
+ (Current).first_line = (Current).last_line = \
+ YYRHSLOC (Rhs, 0).last_line; \
+ (Current).first_column = (Current).last_column = \
+ YYRHSLOC (Rhs, 0).last_column; \
+ (Current).file = YYRHSLOC (Rhs, 0).file; \
+ } \
+ while (YYID (0))
+
+
+
+extern void yyerror(char const *);
+extern void yyerrorf(char const *, ...) __attribute__((format(printf, 1, 2)));
+
+extern struct dtc_file *srcpos_file;
+
+struct search_path {
+ const char *dir; /* NULL for current directory */
+ struct search_path *prev, *next;
+};
+
+extern struct dtc_file *dtc_open_file(const char *fname,
+ const struct search_path *search);
+extern void dtc_close_file(struct dtc_file *file);
--- /dev/null
+/*
+ * (C) Copyright David Gibson <dwg@au1.ibm.com>, IBM Corporation. 2005.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include "dtc.h"
+#include "srcpos.h"
+
+extern FILE *yyin;
+extern int yyparse(void);
+
+struct boot_info *the_boot_info;
+int treesource_error;
+
+struct boot_info *dt_from_source(const char *fname)
+{
+ the_boot_info = NULL;
+ treesource_error = 0;
+
+ srcpos_file = dtc_open_file(fname, NULL);
+ yyin = srcpos_file->file;
+
+ if (yyparse() != 0)
+ die("Unable to parse input tree\n");
+
+ if (treesource_error)
+ die("Syntax error parsing input tree\n");
+
+ return the_boot_info;
+}
+
+static void write_prefix(FILE *f, int level)
+{
+ int i;
+
+ for (i = 0; i < level; i++)
+ fputc('\t', f);
+}
+
+int isstring(char c)
+{
+ return (isprint(c)
+ || (c == '\0')
+ || strchr("\a\b\t\n\v\f\r", c));
+}
+
+static void write_propval_string(FILE *f, struct data val)
+{
+ const char *str = val.val;
+ int i;
+ int newchunk = 1;
+ struct marker *m = val.markers;
+
+ assert(str[val.len-1] == '\0');
+
+ for (i = 0; i < (val.len-1); i++) {
+ char c = str[i];
+
+ if (newchunk) {
+ while (m && (m->offset <= i)) {
+ if (m->type == LABEL) {
+ assert(m->offset == i);
+ fprintf(f, "%s: ", m->ref);
+ }
+ m = m->next;
+ }
+ fprintf(f, "\"");
+ newchunk = 0;
+ }
+
+ switch (c) {
+ case '\a':
+ fprintf(f, "\\a");
+ break;
+ case '\b':
+ fprintf(f, "\\b");
+ break;
+ case '\t':
+ fprintf(f, "\\t");
+ break;
+ case '\n':
+ fprintf(f, "\\n");
+ break;
+ case '\v':
+ fprintf(f, "\\v");
+ break;
+ case '\f':
+ fprintf(f, "\\f");
+ break;
+ case '\r':
+ fprintf(f, "\\r");
+ break;
+ case '\\':
+ fprintf(f, "\\\\");
+ break;
+ case '\"':
+ fprintf(f, "\\\"");
+ break;
+ case '\0':
+ fprintf(f, "\", ");
+ newchunk = 1;
+ break;
+ default:
+ if (isprint(c))
+ fprintf(f, "%c", c);
+ else
+ fprintf(f, "\\x%02hhx", c);
+ }
+ }
+ fprintf(f, "\"");
+
+ /* Wrap up any labels at the end of the value */
+ for_each_marker_of_type(m, LABEL) {
+ assert (m->offset == val.len);
+ fprintf(f, " %s:", m->ref);
+ }
+}
+
+static void write_propval_cells(FILE *f, struct data val)
+{
+ void *propend = val.val + val.len;
+ cell_t *cp = (cell_t *)val.val;
+ struct marker *m = val.markers;
+
+ fprintf(f, "<");
+ for (;;) {
+ while (m && (m->offset <= ((char *)cp - val.val))) {
+ if (m->type == LABEL) {
+ assert(m->offset == ((char *)cp - val.val));
+ fprintf(f, "%s: ", m->ref);
+ }
+ m = m->next;
+ }
+
+ fprintf(f, "0x%x", fdt32_to_cpu(*cp++));
+ if ((void *)cp >= propend)
+ break;
+ fprintf(f, " ");
+ }
+
+ /* Wrap up any labels at the end of the value */
+ for_each_marker_of_type(m, LABEL) {
+ assert (m->offset == val.len);
+ fprintf(f, " %s:", m->ref);
+ }
+ fprintf(f, ">");
+}
+
+static void write_propval_bytes(FILE *f, struct data val)
+{
+ void *propend = val.val + val.len;
+ const char *bp = val.val;
+ struct marker *m = val.markers;
+
+ fprintf(f, "[");
+ for (;;) {
+ while (m && (m->offset == (bp-val.val))) {
+ if (m->type == LABEL)
+ fprintf(f, "%s: ", m->ref);
+ m = m->next;
+ }
+
+ fprintf(f, "%02hhx", *bp++);
+ if ((const void *)bp >= propend)
+ break;
+ fprintf(f, " ");
+ }
+
+ /* Wrap up any labels at the end of the value */
+ for_each_marker_of_type(m, LABEL) {
+ assert (m->offset == val.len);
+ fprintf(f, " %s:", m->ref);
+ }
+ fprintf(f, "]");
+}
+
+static void write_propval(FILE *f, struct property *prop)
+{
+ int len = prop->val.len;
+ const char *p = prop->val.val;
+ struct marker *m = prop->val.markers;
+ int nnotstring = 0, nnul = 0;
+ int nnotstringlbl = 0, nnotcelllbl = 0;
+ int i;
+
+ if (len == 0) {
+ fprintf(f, ";\n");
+ return;
+ }
+
+ for (i = 0; i < len; i++) {
+ if (! isstring(p[i]))
+ nnotstring++;
+ if (p[i] == '\0')
+ nnul++;
+ }
+
+ for_each_marker_of_type(m, LABEL) {
+ if ((m->offset > 0) && (prop->val.val[m->offset - 1] != '\0'))
+ nnotstringlbl++;
+ if ((m->offset % sizeof(cell_t)) != 0)
+ nnotcelllbl++;
+ }
+
+ fprintf(f, " = ");
+ if ((p[len-1] == '\0') && (nnotstring == 0) && (nnul < (len-nnul))
+ && (nnotstringlbl == 0)) {
+ write_propval_string(f, prop->val);
+ } else if (((len % sizeof(cell_t)) == 0) && (nnotcelllbl == 0)) {
+ write_propval_cells(f, prop->val);
+ } else {
+ write_propval_bytes(f, prop->val);
+ }
+
+ fprintf(f, ";\n");
+}
+
+static void write_tree_source_node(FILE *f, struct node *tree, int level)
+{
+ struct property *prop;
+ struct node *child;
+
+ write_prefix(f, level);
+ if (tree->label)
+ fprintf(f, "%s: ", tree->label);
+ if (tree->name && (*tree->name))
+ fprintf(f, "%s {\n", tree->name);
+ else
+ fprintf(f, "/ {\n");
+
+ for_each_property(tree, prop) {
+ write_prefix(f, level+1);
+ if (prop->label)
+ fprintf(f, "%s: ", prop->label);
+ fprintf(f, "%s", prop->name);
+ write_propval(f, prop);
+ }
+ for_each_child(tree, child) {
+ fprintf(f, "\n");
+ write_tree_source_node(f, child, level+1);
+ }
+ write_prefix(f, level);
+ fprintf(f, "};\n");
+}
+
+
+void dt_to_source(FILE *f, struct boot_info *bi)
+{
+ struct reserve_info *re;
+
+ fprintf(f, "/dts-v1/;\n\n");
+
+ for (re = bi->reservelist; re; re = re->next) {
+ if (re->label)
+ fprintf(f, "%s: ", re->label);
+ fprintf(f, "/memreserve/\t0x%016llx 0x%016llx;\n",
+ (unsigned long long)re->re.address,
+ (unsigned long long)re->re.size);
+ }
+
+ write_tree_source_node(f, bi->dt, 0);
+}
+
--- /dev/null
+#define DTC_VERSION "DTC 1.2.0"
}
list_parse() {
- echo "$1 \\"
+ [ ! -L "$1" ] && echo "$1 \\" || :
}
# for each file print a line in following format
--- /dev/null
+#!/usr/bin/perl -w
+# (c) 2007, Joe Perches <joe@perches.com>
+# created from checkpatch.pl
+#
+# Print selected MAINTAINERS information for
+# the files modified in a patch or for a file
+#
+# usage: perl scripts/get_maintainers.pl [OPTIONS] <patch>
+# perl scripts/get_maintainers.pl [OPTIONS] -f <file>
+#
+# Licensed under the terms of the GNU GPL License version 2
+
+use strict;
+
+my $P = $0;
+my $V = '0.15';
+
+use Getopt::Long qw(:config no_auto_abbrev);
+
+my $lk_path = "./";
+my $email = 1;
+my $email_usename = 1;
+my $email_maintainer = 1;
+my $email_list = 1;
+my $email_subscriber_list = 0;
+my $email_git = 1;
+my $email_git_penguin_chiefs = 0;
+my $email_git_min_signatures = 1;
+my $email_git_max_maintainers = 5;
+my $email_git_since = "1-year-ago";
+my $output_multiline = 1;
+my $output_separator = ", ";
+my $scm = 0;
+my $web = 0;
+my $subsystem = 0;
+my $status = 0;
+my $from_filename = 0;
+my $version = 0;
+my $help = 0;
+
+my $exit = 0;
+
+my @penguin_chief = ();
+push(@penguin_chief,"Linus Torvalds:torvalds\@linux-foundation.org");
+#Andrew wants in on most everything - 2009/01/14
+#push(@penguin_chief,"Andrew Morton:akpm\@linux-foundation.org");
+
+my @penguin_chief_names = ();
+foreach my $chief (@penguin_chief) {
+ if ($chief =~ m/^(.*):(.*)/) {
+ my $chief_name = $1;
+ my $chief_addr = $2;
+ push(@penguin_chief_names, $chief_name);
+ }
+}
+my $penguin_chiefs = "\(" . join("|",@penguin_chief_names) . "\)";
+
+if (!GetOptions(
+ 'email!' => \$email,
+ 'git!' => \$email_git,
+ 'git-chief-penguins!' => \$email_git_penguin_chiefs,
+ 'git-min-signatures=i' => \$email_git_min_signatures,
+ 'git-max-maintainers=i' => \$email_git_max_maintainers,
+ 'git-since=s' => \$email_git_since,
+ 'm!' => \$email_maintainer,
+ 'n!' => \$email_usename,
+ 'l!' => \$email_list,
+ 's!' => \$email_subscriber_list,
+ 'multiline!' => \$output_multiline,
+ 'separator=s' => \$output_separator,
+ 'subsystem!' => \$subsystem,
+ 'status!' => \$status,
+ 'scm!' => \$scm,
+ 'web!' => \$web,
+ 'f|file' => \$from_filename,
+ 'v|version' => \$version,
+ 'h|help' => \$help,
+ )) {
+ usage();
+ die "$P: invalid argument\n";
+}
+
+if ($help != 0) {
+ usage();
+ exit 0;
+}
+
+if ($version != 0) {
+ print("${P} ${V}\n");
+ exit 0;
+}
+
+if ($#ARGV < 0) {
+ usage();
+ die "$P: argument missing: patchfile or -f file please\n";
+}
+
+my $selections = $email + $scm + $status + $subsystem + $web;
+if ($selections == 0) {
+ usage();
+ die "$P: Missing required option: email, scm, status, subsystem or web\n";
+}
+
+if ($email && ($email_maintainer + $email_list + $email_subscriber_list
+ + $email_git + $email_git_penguin_chiefs) == 0) {
+ usage();
+ die "$P: Please select at least 1 email option\n";
+}
+
+if (!top_of_kernel_tree($lk_path)) {
+ die "$P: The current directory does not appear to be "
+ . "a linux kernel source tree.\n";
+}
+
+## Read MAINTAINERS for type/value pairs
+
+my @typevalue = ();
+open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n";
+while (<MAINT>) {
+ my $line = $_;
+
+ if ($line =~ m/^(\C):\s*(.*)/) {
+ my $type = $1;
+ my $value = $2;
+
+ ##Filename pattern matching
+ if ($type eq "F" || $type eq "X") {
+ $value =~ s@\.@\\\.@g; ##Convert . to \.
+ $value =~ s/\*/\.\*/g; ##Convert * to .*
+ $value =~ s/\?/\./g; ##Convert ? to .
+ }
+ push(@typevalue, "$type:$value");
+ } elsif (!/^(\s)*$/) {
+ $line =~ s/\n$//g;
+ push(@typevalue, $line);
+ }
+}
+close(MAINT);
+
+## use the filenames on the command line or find the filenames in the patchfiles
+
+my @files = ();
+
+foreach my $file (@ARGV) {
+ next if ((-d $file));
+ if (!(-f $file)) {
+ die "$P: file '${file}' not found\n";
+ }
+ if ($from_filename) {
+ push(@files, $file);
+ } else {
+ my $file_cnt = @files;
+ open(PATCH, "<$file") or die "$P: Can't open ${file}\n";
+ while (<PATCH>) {
+ if (m/^\+\+\+\s+(\S+)/) {
+ my $filename = $1;
+ $filename =~ s@^[^/]*/@@;
+ $filename =~ s@\n@@;
+ push(@files, $filename);
+ }
+ }
+ close(PATCH);
+ if ($file_cnt == @files) {
+ die "$P: file '${file}' doesn't appear to be a patch. "
+ . "Add -f to options?\n";
+ }
+ @files = sort_and_uniq(@files);
+ }
+}
+
+my @email_to = ();
+my @scm = ();
+my @web = ();
+my @subsystem = ();
+my @status = ();
+
+# Find responsible parties
+
+foreach my $file (@files) {
+
+#Do not match excluded file patterns
+
+ my $exclude = 0;
+ foreach my $line (@typevalue) {
+ if ($line =~ m/^(\C):(.*)/) {
+ my $type = $1;
+ my $value = $2;
+ if ($type eq 'X') {
+ if (file_match_pattern($file, $value)) {
+ $exclude = 1;
+ }
+ }
+ }
+ }
+
+ if (!$exclude) {
+ my $tvi = 0;
+ foreach my $line (@typevalue) {
+ if ($line =~ m/^(\C):(.*)/) {
+ my $type = $1;
+ my $value = $2;
+ if ($type eq 'F') {
+ if (file_match_pattern($file, $value)) {
+ add_categories($tvi);
+ }
+ }
+ }
+ $tvi++;
+ }
+ }
+
+ if ($email && $email_git) {
+ recent_git_signoffs($file);
+ }
+
+}
+
+if ($email_git_penguin_chiefs) {
+ foreach my $chief (@penguin_chief) {
+ if ($chief =~ m/^(.*):(.*)/) {
+ my $chief_name = $1;
+ my $chief_addr = $2;
+ if ($email_usename) {
+ push(@email_to, format_email($chief_name, $chief_addr));
+ } else {
+ push(@email_to, $chief_addr);
+ }
+ }
+ }
+}
+
+if ($email) {
+ my $address_cnt = @email_to;
+ if ($address_cnt == 0 && $email_list) {
+ push(@email_to, "linux-kernel\@vger.kernel.org");
+ }
+
+#Don't sort email address list, but do remove duplicates
+ @email_to = uniq(@email_to);
+ output(@email_to);
+}
+
+if ($scm) {
+ @scm = sort_and_uniq(@scm);
+ output(@scm);
+}
+
+if ($status) {
+ @status = sort_and_uniq(@status);
+ output(@status);
+}
+
+if ($subsystem) {
+ @subsystem = sort_and_uniq(@subsystem);
+ output(@subsystem);
+}
+
+if ($web) {
+ @web = sort_and_uniq(@web);
+ output(@web);
+}
+
+exit($exit);
+
+sub file_match_pattern {
+ my ($file, $pattern) = @_;
+ if (substr($pattern, -1) eq "/") {
+ if ($file =~ m@^$pattern@) {
+ return 1;
+ }
+ } else {
+ if ($file =~ m@^$pattern@) {
+ my $s1 = ($file =~ tr@/@@);
+ my $s2 = ($pattern =~ tr@/@@);
+ if ($s1 == $s2) {
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+sub usage {
+ print <<EOT;
+usage: $P [options] patchfile
+ $P [options] -f file
+version: $V
+
+MAINTAINER field selection options:
+ --email => print email address(es) if any
+ --git => include recent git \*-by: signers
+ --git-chief-penguins => include ${penguin_chiefs}
+ --git-min-signatures => number of signatures required (default: 1)
+ --git-max-maintainers => maximum maintainers to add (default: 5)
+ --git-since => git history to use (default: 1-year-ago)
+ --m => include maintainer(s) if any
+ --n => include name 'Full Name <addr\@domain.tld>'
+ --l => include list(s) if any
+ --s => include subscriber only list(s) if any
+ --scm => print SCM tree(s) if any
+ --status => print status if any
+ --subsystem => print subsystem name if any
+ --web => print website(s) if any
+
+Output type options:
+ --separator [, ] => separator for multiple entries on 1 line
+ --multiline => print 1 entry per line
+
+Default options:
+ [--email --git --m --l --multiline]
+
+Other options:
+ --version -> show version
+ --help => show this help information
+
+EOT
+}
+
+sub top_of_kernel_tree {
+ my ($lk_path) = @_;
+
+ if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") {
+ $lk_path .= "/";
+ }
+ if ( (-f "${lk_path}COPYING")
+ && (-f "${lk_path}CREDITS")
+ && (-f "${lk_path}Kbuild")
+ && (-f "${lk_path}MAINTAINERS")
+ && (-f "${lk_path}Makefile")
+ && (-f "${lk_path}README")
+ && (-d "${lk_path}Documentation")
+ && (-d "${lk_path}arch")
+ && (-d "${lk_path}include")
+ && (-d "${lk_path}drivers")
+ && (-d "${lk_path}fs")
+ && (-d "${lk_path}init")
+ && (-d "${lk_path}ipc")
+ && (-d "${lk_path}kernel")
+ && (-d "${lk_path}lib")
+ && (-d "${lk_path}scripts")) {
+ return 1;
+ }
+ return 0;
+}
+
+sub format_email {
+ my ($name, $email) = @_;
+
+ $name =~ s/^\s+|\s+$//g;
+ $email =~ s/^\s+|\s+$//g;
+
+ my $formatted_email = "";
+
+ if ($name =~ /[^a-z0-9 \.\-]/i) { ##has "must quote" chars
+ $name =~ s/(?<!\\)"/\\"/g; ##escape quotes
+ $formatted_email = "\"${name}\"\ \<${email}\>";
+ } else {
+ $formatted_email = "${name} \<${email}\>";
+ }
+ return $formatted_email;
+}
+
+sub add_categories {
+ my ($index) = @_;
+
+ $index = $index - 1;
+ while ($index >= 0) {
+ my $tv = $typevalue[$index];
+ if ($tv =~ m/^(\C):(.*)/) {
+ my $ptype = $1;
+ my $pvalue = $2;
+ if ($ptype eq "L") {
+ my $subscr = $pvalue;
+ if ($subscr =~ m/\s*\(subscribers-only\)/) {
+ if ($email_subscriber_list) {
+ $subscr =~ s/\s*\(subscribers-only\)//g;
+ push(@email_to, $subscr);
+ }
+ } else {
+ if ($email_list) {
+ push(@email_to, $pvalue);
+ }
+ }
+ } elsif ($ptype eq "M") {
+ if ($email_maintainer) {
+ if ($index >= 0) {
+ my $tv = $typevalue[$index - 1];
+ if ($tv =~ m/^(\C):(.*)/) {
+ if ($1 eq "P" && $email_usename) {
+ push(@email_to, format_email($2, $pvalue));
+ } else {
+ push(@email_to, $pvalue);
+ }
+ }
+ } else {
+ push(@email_to, $pvalue);
+ }
+ }
+ } elsif ($ptype eq "T") {
+ push(@scm, $pvalue);
+ } elsif ($ptype eq "W") {
+ push(@web, $pvalue);
+ } elsif ($ptype eq "S") {
+ push(@status, $pvalue);
+ }
+
+ $index--;
+ } else {
+ push(@subsystem,$tv);
+ $index = -1;
+ }
+ }
+}
+
+sub which {
+ my ($bin) = @_;
+
+ foreach my $path (split /:/, $ENV{PATH}) {
+ if (-e "$path/$bin") {
+ return "$path/$bin";
+ }
+ }
+
+ return "";
+}
+
+sub recent_git_signoffs {
+ my ($file) = @_;
+
+ my $sign_offs = "";
+ my $cmd = "";
+ my $output = "";
+ my $count = 0;
+ my @lines = ();
+
+ if (which("git") eq "") {
+ die("$P: git not found. Add --nogit to options?\n");
+ }
+
+ $cmd = "git log --since=${email_git_since} -- ${file}";
+ $cmd .= " | grep -Pi \"^[-_ a-z]+by:.*\\\@\"";
+ if (!$email_git_penguin_chiefs) {
+ $cmd .= " | grep -Pv \"${penguin_chiefs}\"";
+ }
+ $cmd .= " | cut -f2- -d\":\"";
+ $cmd .= " | sed -e \"s/^\\s+//g\"";
+ $cmd .= " | sort | uniq -c | sort -rn";
+
+ $output = `${cmd}`;
+ $output =~ s/^\s*//gm;
+
+ @lines = split("\n", $output);
+ foreach my $line (@lines) {
+ if ($line =~ m/([0-9]+)\s+(.*)/) {
+ my $sign_offs = $1;
+ $line = $2;
+ $count++;
+ if ($sign_offs < $email_git_min_signatures ||
+ $count > $email_git_max_maintainers) {
+ last;
+ }
+ } else {
+ die("$P: Unexpected git output: ${line}\n");
+ }
+ if ($line =~ m/(.+)<(.+)>/) {
+ my $git_name = $1;
+ my $git_addr = $2;
+ $git_name =~ tr/^\"//;
+ $git_name =~ tr/^\\s*//;
+ $git_name =~ tr/\"$//;
+ $git_name =~ tr/\\s*$//;
+ if ($email_usename) {
+ push(@email_to, format_email($git_name, $git_addr));
+ } else {
+ push(@email_to, $git_addr);
+ }
+ } elsif ($line =~ m/<(.+)>/) {
+ my $git_addr = $1;
+ push(@email_to, $git_addr);
+ } else {
+ push(@email_to, $line);
+ }
+ }
+ return $output;
+}
+
+sub uniq {
+ my @parms = @_;
+
+ my %saw;
+ @parms = grep(!$saw{$_}++, @parms);
+ return @parms;
+}
+
+sub sort_and_uniq {
+ my @parms = @_;
+
+ my %saw;
+ @parms = sort @parms;
+ @parms = grep(!$saw{$_}++, @parms);
+ return @parms;
+}
+
+sub output {
+ my @parms = @_;
+
+ if ($output_multiline) {
+ foreach my $line (@parms) {
+ print("${line}\n");
+ }
+ } else {
+ print(join($output_separator, @parms));
+ print("\n");
+ }
+}
version => \&version,
all => \$opt_all,
- I => \@opt_include,
+ "I=s" => \@opt_include,
graph => \$opt_graph,
);
+++ /dev/null
-/*
- * Parser/loader for IHEX formatted data.
- *
- * Copyright © 2008 David Woodhouse <dwmw2@infradead.org>
- * Copyright © 2005 Jan Harkes <jaharkes@cs.cmu.edu>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <stdint.h>
-#include <arpa/inet.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/mman.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <stdlib.h>
-#define _GNU_SOURCE
-#include <getopt.h>
-
-
-struct ihex_binrec {
- struct ihex_binrec *next; /* not part of the real data structure */
- uint32_t addr;
- uint16_t len;
- uint8_t data[];
-};
-
-/**
- * nybble/hex are little helpers to parse hexadecimal numbers to a byte value
- **/
-static uint8_t nybble(const uint8_t n)
-{
- if (n >= '0' && n <= '9') return n - '0';
- else if (n >= 'A' && n <= 'F') return n - ('A' - 10);
- else if (n >= 'a' && n <= 'f') return n - ('a' - 10);
- return 0;
-}
-
-static uint8_t hex(const uint8_t *data, uint8_t *crc)
-{
- uint8_t val = (nybble(data[0]) << 4) | nybble(data[1]);
- *crc += val;
- return val;
-}
-
-static int process_ihex(uint8_t *data, ssize_t size);
-static void file_record(struct ihex_binrec *record);
-static int output_records(int outfd);
-
-static int sort_records = 0;
-static int wide_records = 0;
-
-int usage(void)
-{
- fprintf(stderr, "ihex2fw: Convert ihex files into binary "
- "representation for use by Linux kernel\n");
- fprintf(stderr, "usage: ihex2fw [<options>] <src.HEX> <dst.fw>\n");
- fprintf(stderr, " -w: wide records (16-bit length)\n");
- fprintf(stderr, " -s: sort records by address\n");
- return 1;
-}
-
-int main(int argc, char **argv)
-{
- int infd, outfd;
- struct stat st;
- uint8_t *data;
- int opt;
-
- while ((opt = getopt(argc, argv, "ws")) != -1) {
- switch (opt) {
- case 'w':
- wide_records = 1;
- break;
- case 's':
- sort_records = 1;
- break;
- default:
- return usage();
- }
- }
-
- if (optind + 2 != argc)
- return usage();
-
- if (!strcmp(argv[optind], "-"))
- infd = 0;
- else
- infd = open(argv[optind], O_RDONLY);
- if (infd == -1) {
- fprintf(stderr, "Failed to open source file: %s",
- strerror(errno));
- return usage();
- }
- if (fstat(infd, &st)) {
- perror("stat");
- return 1;
- }
- data = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED, infd, 0);
- if (data == MAP_FAILED) {
- perror("mmap");
- return 1;
- }
-
- if (!strcmp(argv[optind+1], "-"))
- outfd = 1;
- else
- outfd = open(argv[optind+1], O_TRUNC|O_CREAT|O_WRONLY, 0644);
- if (outfd == -1) {
- fprintf(stderr, "Failed to open destination file: %s",
- strerror(errno));
- return usage();
- }
- if (process_ihex(data, st.st_size))
- return 1;
-
- output_records(outfd);
- return 0;
-}
-
-static int process_ihex(uint8_t *data, ssize_t size)
-{
- struct ihex_binrec *record;
- uint32_t offset = 0;
- uint8_t type, crc = 0, crcbyte = 0;
- int i, j;
- int line = 1;
- int len;
-
- i = 0;
-next_record:
- /* search for the start of record character */
- while (i < size) {
- if (data[i] == '\n') line++;
- if (data[i++] == ':') break;
- }
-
- /* Minimum record length would be about 10 characters */
- if (i + 10 > size) {
- fprintf(stderr, "Can't find valid record at line %d\n", line);
- return -EINVAL;
- }
-
- len = hex(data + i, &crc); i += 2;
- if (wide_records) {
- len <<= 8;
- len += hex(data + i, &crc); i += 2;
- }
- record = malloc((sizeof (*record) + len + 3) & ~3);
- if (!record) {
- fprintf(stderr, "out of memory for records\n");
- return -ENOMEM;
- }
- memset(record, 0, (sizeof(*record) + len + 3) & ~3);
- record->len = len;
-
- /* now check if we have enough data to read everything */
- if (i + 8 + (record->len * 2) > size) {
- fprintf(stderr, "Not enough data to read complete record at line %d\n",
- line);
- return -EINVAL;
- }
-
- record->addr = hex(data + i, &crc) << 8; i += 2;
- record->addr |= hex(data + i, &crc); i += 2;
- type = hex(data + i, &crc); i += 2;
-
- for (j = 0; j < record->len; j++, i += 2)
- record->data[j] = hex(data + i, &crc);
-
- /* check CRC */
- crcbyte = hex(data + i, &crc); i += 2;
- if (crc != 0) {
- fprintf(stderr, "CRC failure at line %d: got 0x%X, expected 0x%X\n",
- line, crcbyte, (unsigned char)(crcbyte-crc));
- return -EINVAL;
- }
-
- /* Done reading the record */
- switch (type) {
- case 0:
- /* old style EOF record? */
- if (!record->len)
- break;
-
- record->addr += offset;
- file_record(record);
- goto next_record;
-
- case 1: /* End-Of-File Record */
- if (record->addr || record->len) {
- fprintf(stderr, "Bad EOF record (type 01) format at line %d",
- line);
- return -EINVAL;
- }
- break;
-
- case 2: /* Extended Segment Address Record (HEX86) */
- case 4: /* Extended Linear Address Record (HEX386) */
- if (record->addr || record->len != 2) {
- fprintf(stderr, "Bad HEX86/HEX386 record (type %02X) at line %d\n",
- type, line);
- return -EINVAL;
- }
-
- /* We shouldn't really be using the offset for HEX86 because
- * the wraparound case is specified quite differently. */
- offset = record->data[0] << 8 | record->data[1];
- offset <<= (type == 2 ? 4 : 16);
- goto next_record;
-
- case 3: /* Start Segment Address Record */
- case 5: /* Start Linear Address Record */
- if (record->addr || record->len != 4) {
- fprintf(stderr, "Bad Start Address record (type %02X) at line %d\n",
- type, line);
- return -EINVAL;
- }
-
- /* These records contain the CS/IP or EIP where execution
- * starts. Don't really know what to do with them. */
- goto next_record;
-
- default:
- fprintf(stderr, "Unknown record (type %02X)\n", type);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct ihex_binrec *records;
-
-static void file_record(struct ihex_binrec *record)
-{
- struct ihex_binrec **p = &records;
-
- while ((*p) && (!sort_records || (*p)->addr < record->addr))
- p = &((*p)->next);
-
- record->next = *p;
- *p = record;
-}
-
-static int output_records(int outfd)
-{
- unsigned char zeroes[6] = {0, 0, 0, 0, 0, 0};
- struct ihex_binrec *p = records;
-
- while (p) {
- uint16_t writelen = (p->len + 9) & ~3;
-
- p->addr = htonl(p->addr);
- p->len = htons(p->len);
- write(outfd, &p->addr, writelen);
- p = p->next;
- }
- /* EOF record is zero length, since we don't bother to represent
- the type field in the binary version */
- write(outfd, zeroes, 6);
- return 0;
-}
++text;
goto next;
}
+ else if (*text == '\\') {
+ *bfp++ = '\\';
+ len--;
+ }
*bfp++ = *text++;
next:
--len;
my $file = shift;
my $nested;
- if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) {
+ if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) {
+ #my $decl_type = $1;
$declaration_name = $2;
my $members = $3;
$nested = $1;
# ignore members marked private:
- $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
- $members =~ s/\/\*.*?private:.*//gos;
+ $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos;
+ $members =~ s/\/\*\s*private:.*//gos;
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
return 0;
}
/* Fix endianness in ELF header */
- hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
- hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
- hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
- hdr->e_machine = TO_NATIVE(hdr->e_machine);
- hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_machine = TO_NATIVE(hdr->e_machine);
+ hdr->e_version = TO_NATIVE(hdr->e_version);
+ hdr->e_entry = TO_NATIVE(hdr->e_entry);
+ hdr->e_phoff = TO_NATIVE(hdr->e_phoff);
+ hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
+ hdr->e_flags = TO_NATIVE(hdr->e_flags);
+ hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize);
+ hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize);
+ hdr->e_phnum = TO_NATIVE(hdr->e_phnum);
+ hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize);
+ hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
+ hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
sechdrs = (void *)hdr + hdr->e_shoff;
info->sechdrs = sechdrs;
/* Fix endianness in section headers */
for (i = 0; i < hdr->e_shnum; i++) {
- sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
- sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
- sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
- sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
- sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
- sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
- sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
+ sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
+ sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags);
+ sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
+ sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
+ sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
+ sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
+ sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign);
+ sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize);
}
/* Find symbol table. */
for (i = 1; i < hdr->e_shnum; i++) {
/* sections that we do not want to do full section mismatch check on */
static const char *section_white_list[] =
- { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+{
+ ".comment*",
+ ".debug*",
+ ".mdebug*", /* alpha, score, mips etc. */
+ ".pdr", /* alpha, score, mips etc. */
+ ".stab*",
+ ".note*",
+ ".got*",
+ ".toc*",
+ NULL
+};
/*
- * Is this section one we do not want to check?
- * This is often debug sections.
- * If we are going to check this section then
- * test if section name ends with a dot and a number.
- * This is used to find sections where the linker have
- * appended a dot-number to make the name unique.
+ * This is used to find sections missing the SHF_ALLOC flag.
* The cause of this is often a section specified in assembler
- * without "ax" / "aw" and the same section used in .c
- * code where gcc add these.
+ * without "ax" / "aw".
*/
-static int check_section(const char *modname, const char *sec)
-{
- const char *e = sec + strlen(sec) - 1;
- if (match(sec, section_white_list))
- return 1;
-
- if (*e && isdigit(*e)) {
- /* consume all digits */
- while (*e && e != sec && isdigit(*e))
- e--;
- if (*e == '.' && !strstr(sec, ".linkonce")) {
- warn("%s (%s): unexpected section name.\n"
- "The (.[number]+) following section name are "
- "ld generated and not expected.\n"
- "Did you forget to use \"ax\"/\"aw\" "
- "in a .S file?\n"
- "Note that for example <linux/init.h> contains\n"
- "section definitions for use in .S files.\n\n",
- modname, sec);
- }
+static void check_section(const char *modname, struct elf_info *elf,
+ Elf_Shdr *sechdr)
+{
+ const char *sec = sech_name(elf, sechdr);
+
+ if (sechdr->sh_type == SHT_PROGBITS &&
+ !(sechdr->sh_flags & SHF_ALLOC) &&
+ !match(sec, section_white_list)) {
+ warn("%s (%s): unexpected non-allocatable section.\n"
+ "Did you forget to use \"ax\"/\"aw\" in a .S file?\n"
+ "Note that for example <linux/init.h> contains\n"
+ "section definitions for use in .S files.\n\n",
+ modname, sec);
}
- return 0;
}
/* data section */
static const char *data_sections[] = { DATA_SECTIONS, NULL };
-/* sections that may refer to an init/exit section with no warning */
-static const char *initref_sections[] =
-{
- ".text.init.refok*",
- ".exit.text.refok*",
- ".data.init.refok*",
- NULL
-};
-
/* symbols in .data that may refer to init/exit sections */
static const char *symbol_white_list[] =
/**
* Whitelist to allow certain references to pass with no warning.
*
- * Pattern 0:
- * Do not warn if funtion/data are marked with __init_refok/__initdata_refok.
- * The pattern is identified by:
- * fromsec = .text.init.refok* | .data.init.refok*
- *
* Pattern 1:
* If a module parameter is declared __initdata and permissions=0
* then this is legal despite the warning generated.
* *probe_one, *_console, *_timer
*
* Pattern 3:
- * Whitelist all refereces from .text.head to .init.data
- * Whitelist all refereces from .text.head to .init.text
+ * Whitelist all references from .head.text to any init section
*
* Pattern 4:
* Some symbols belong to init section but still it is ok to reference
static int secref_whitelist(const char *fromsec, const char *fromsym,
const char *tosec, const char *tosym)
{
- /* Check for pattern 0 */
- if (match(fromsec, initref_sections))
- return 0;
-
/* Check for pattern 1 */
if (match(tosec, init_data_sections) &&
match(fromsec, data_sections) &&
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rela");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rela = start; rela < stop; rela++) {
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rel");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rel = start; rel < stop; rel++) {
/* Walk through all sections */
for (i = 0; i < elf->hdr->e_shnum; i++) {
+ check_section(modname, elf, &elf->sechdrs[i]);
/* We want to process only relocation sections and not .init */
if (sechdrs[i].sh_type == SHT_RELA)
section_rela(modname, elf, &elf->sechdrs[i]);
if (!mod) {
if (is_vmlinux(modname))
have_vmlinux = 1;
- mod = new_module(NOFAIL(strdup(modname)));
+ mod = new_module(modname);
mod->skip = 1;
}
s = sym_add_exported(symname, mod, export_no(export));
mod = find_module(modname);
if (!mod) {
- mod = new_module(NOFAIL(strdup(modname)));
+ mod = new_module(modname);
mod->skip = 1;
}
if (is_vmlinux(modname)) {
if (!mod->skip)
add_marker(mod, marker, fmt);
}
+ release_file(file, size);
return;
fail:
fatal("parse error in markers list file\n");
#!/bin/sh
-# Print additional version information for non-release trees.
+#
+# This scripts adds local version information from the version
+# control systems git, mercurial (hg) and subversion (svn).
+#
+# If something goes wrong, send a mail the kernel build mailinglist
+# (see MAINTAINERS) and CC Nico Schottelius
+# <nico-linuxsetlocalversion -at- schottelius.org>.
+#
+#
usage() {
echo "Usage: $0 [srctree]" >&2
# Check for git and a git repo.
if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
- # Do we have an untagged version?
- if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
- if tag=`git describe 2>/dev/null`; then
- echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+ # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
+ # because this version is defined in the top level Makefile.
+ if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+ # If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
+ # we pretty print it.
+ if atag="`git describe 2>/dev/null`"; then
+ echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+ # If we don't have a tag at all we print -g{commitish}.
else
printf '%s%s' -g $head
fi
# Is this git on svn?
if git config --get svn-remote.svn.url >/dev/null; then
- printf -- '-svn%s' "`git-svn find-rev $head`"
+ printf -- '-svn%s' "`git svn find-rev $head`"
fi
# Are there uncommitted changes?
;;
"tags")
+ rm -f tags
xtags ctags
;;
"TAGS")
+ rm -f TAGS
xtags etags
;;
esac
return commit_creds(new);
no_change:
- error = 0;
error:
abort_creds(new);
return error;
set_bit(KEY_FLAG_USER_CONSTRUCT, &key->flags);
- down_write(&dest_keyring->sem);
+ if (dest_keyring)
+ down_write(&dest_keyring->sem);
/* attach the key to the destination keyring under lock, but we do need
* to do another check just in case someone beat us to it whilst we
if (!IS_ERR(key_ref))
goto key_already_present;
- __key_link(dest_keyring, key);
+ if (dest_keyring)
+ __key_link(dest_keyring, key);
mutex_unlock(&key_construction_mutex);
- up_write(&dest_keyring->sem);
+ if (dest_keyring)
+ up_write(&dest_keyring->sem);
mutex_unlock(&user->cons_lock);
*_key = key;
kleave(" = 0 [%d]", key_serial(key));
struct fown_struct *fown, int signum)
{
struct file *file;
- u32 sid = current_sid();
+ u32 sid = task_sid(tsk);
u32 perm;
struct file_security_struct *fsec;
strcmp(name, XATTR_NAME_SMACKIPOUT) == 0) {
if (!capable(CAP_MAC_ADMIN))
rc = -EPERM;
- /* a label cannot be void and cannot begin with '-' */
- if (size == 0 || (size > 0 && ((char *)value)[0] == '-'))
+ /*
+ * check label validity here so import wont fail on
+ * post_setxattr
+ */
+ if (size == 0 || size >= SMK_LABELLEN ||
+ smk_import(value, size) == NULL)
rc = -EINVAL;
} else
rc = cap_inode_setxattr(dentry, name, value, size, flags);
if (strcmp(name, XATTR_NAME_SMACK))
return;
- if (size >= SMK_LABELLEN)
- return;
-
isp = dentry->d_inode->i_security;
/*
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
* policies are not loaded yet.
* Thus, let do_execve() call this function everytime.
*/
- struct nameidata nd;
+ struct path path;
- if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) {
+ if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
printk(KERN_INFO "Not activating Mandatory Access Control now "
"since %s doesn't exist.\n", tomoyo_loader);
return false;
}
- path_put(&nd.path);
+ path_put(&path);
return true;
}
envp[2] = NULL;
call_usermodehelper(argv[0], argv, envp, 1);
- printk(KERN_INFO "TOMOYO: 2.2.0-pre 2009/02/01\n");
+ printk(KERN_INFO "TOMOYO: 2.2.0 2009/04/01\n");
printk(KERN_INFO "Mandatory Access Control activated.\n");
tomoyo_policy_loaded = true;
{ /* Check all profiles currently assigned to domains are defined. */
static int tomoyo_read_version(struct tomoyo_io_buffer *head)
{
if (!head->read_eof) {
- tomoyo_io_printf(head, "2.2.0-pre");
+ tomoyo_io_printf(head, "2.2.0");
head->read_eof = true;
}
return 0;
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*/
char *tomoyo_realpath(const char *pathname)
{
- struct nameidata nd;
+ struct path path;
- if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) {
- char *buf = tomoyo_realpath_from_path(&nd.path);
- path_put(&nd.path);
+ if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
+ char *buf = tomoyo_realpath_from_path(&path);
+ path_put(&path);
return buf;
}
return NULL;
*/
char *tomoyo_realpath_nofollow(const char *pathname)
{
- struct nameidata nd;
+ struct path path;
- if (pathname && path_lookup(pathname, 0, &nd) == 0) {
- char *buf = tomoyo_realpath_from_path(&nd.path);
- path_put(&nd.path);
+ if (pathname && kern_path(pathname, 0, &path) == 0) {
+ char *buf = tomoyo_realpath_from_path(&path);
+ path_put(&path);
return buf;
}
return NULL;
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
{
+ int rc;
+
+ rc = cap_bprm_set_creds(bprm);
+ if (rc)
+ return rc;
+
/*
* Do only if this function is called for the first time of an execve
* operation.
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
struct onyx {
/* cache registers 65 to 80, they are write-only! */
u8 cache[16];
- struct i2c_client i2c;
+ struct i2c_client *i2c;
struct aoa_codec codec;
u32 initialised:1,
spdif_locked:1,
*value = onyx->cache[reg-FIRSTREGISTER];
return 0;
}
- v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+ v = i2c_smbus_read_byte_data(onyx->i2c, reg);
if (v < 0)
return -1;
*value = (u8)v;
{
int result;
- result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+ result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
if (!result)
onyx->cache[reg-FIRSTREGISTER] = value;
return result;
onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
}
-static struct i2c_driver onyx_driver;
-
static int onyx_create(struct i2c_adapter *adapter,
struct device_node *node,
int addr)
{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
+ info.addr = addr;
+ info.platform_data = node;
+ client = i2c_new_device(adapter, &info);
+ if (!client)
+ return -ENODEV;
+
+ /*
+ * We know the driver is already loaded, so the device should be
+ * already bound. If not it means binding failed, which suggests
+ * the device doesn't really exist and should be deleted.
+ * Ideally this would be replaced by better checks _before_
+ * instantiating the device.
+ */
+ if (!client->driver) {
+ i2c_unregister_device(client);
+ return -ENODEV;
+ }
+
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return 0;
+}
+
+static int onyx_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = client->dev.platform_data;
struct onyx *onyx;
u8 dummy;
return -ENOMEM;
mutex_init(&onyx->mutex);
- onyx->i2c.driver = &onyx_driver;
- onyx->i2c.adapter = adapter;
- onyx->i2c.addr = addr & 0x7f;
- strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
-
- if (i2c_attach_client(&onyx->i2c)) {
- printk(KERN_ERR PFX "failed to attach to i2c\n");
- goto fail;
- }
+ onyx->i2c = client;
+ i2c_set_clientdata(client, onyx);
/* we try to read from register ONYX_REG_CONTROL
* to check if the codec is present */
if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
- i2c_detach_client(&onyx->i2c);
printk(KERN_ERR PFX "failed to read control register\n");
goto fail;
}
onyx->codec.node = of_node_get(node);
if (aoa_codec_register(&onyx->codec)) {
- i2c_detach_client(&onyx->i2c);
goto fail;
}
printk(KERN_DEBUG PFX "created and attached onyx instance\n");
return 0;
fail:
+ i2c_set_clientdata(client, NULL);
kfree(onyx);
- return -EINVAL;
+ return -ENODEV;
}
static int onyx_i2c_attach(struct i2c_adapter *adapter)
return onyx_create(adapter, NULL, 0x47);
}
-static int onyx_i2c_detach(struct i2c_client *client)
+static int onyx_i2c_remove(struct i2c_client *client)
{
- struct onyx *onyx = container_of(client, struct onyx, i2c);
- int err;
+ struct onyx *onyx = i2c_get_clientdata(client);
- if ((err = i2c_detach_client(client)))
- return err;
aoa_codec_unregister(&onyx->codec);
of_node_put(onyx->codec.node);
if (onyx->codec_info)
kfree(onyx->codec_info);
+ i2c_set_clientdata(client, onyx);
kfree(onyx);
return 0;
}
+static const struct i2c_device_id onyx_i2c_id[] = {
+ { "aoa_codec_onyx", 0 },
+ { }
+};
+
static struct i2c_driver onyx_driver = {
.driver = {
.name = "aoa_codec_onyx",
.owner = THIS_MODULE,
},
.attach_adapter = onyx_i2c_attach,
- .detach_client = onyx_i2c_detach,
+ .probe = onyx_i2c_probe,
+ .remove = onyx_i2c_remove,
+ .id_table = onyx_i2c_id,
};
static int __init onyx_init(void)
struct tas {
struct aoa_codec codec;
- struct i2c_client i2c;
+ struct i2c_client *i2c;
u32 mute_l:1, mute_r:1 ,
controls_created:1 ,
drc_enabled:1,
static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
{
if (len == 1)
- return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
+ return i2c_smbus_write_byte_data(tas->i2c, reg, *data);
else
- return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
+ return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data);
}
static void tas3004_set_drc(struct tas *tas)
}
-static struct i2c_driver tas_driver;
-
static int tas_create(struct i2c_adapter *adapter,
struct device_node *node,
int addr)
{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
+ info.addr = addr;
+ info.platform_data = node;
+
+ client = i2c_new_device(adapter, &info);
+ if (!client)
+ return -ENODEV;
+
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return 0;
+}
+
+static int tas_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = client->dev.platform_data;
struct tas *tas;
tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
return -ENOMEM;
mutex_init(&tas->mtx);
- tas->i2c.driver = &tas_driver;
- tas->i2c.adapter = adapter;
- tas->i2c.addr = addr;
+ tas->i2c = client;
+ i2c_set_clientdata(client, tas);
+
/* seems that half is a saner default */
tas->drc_range = TAS3004_DRC_MAX / 2;
- strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
-
- if (i2c_attach_client(&tas->i2c)) {
- printk(KERN_ERR PFX "failed to attach to i2c\n");
- goto fail;
- }
strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
tas->codec.owner = THIS_MODULE;
tas->codec.node = of_node_get(node);
if (aoa_codec_register(&tas->codec)) {
- goto detach;
+ goto fail;
}
printk(KERN_DEBUG
"snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
- addr, node->full_name);
+ (unsigned int)client->addr, node->full_name);
return 0;
- detach:
- i2c_detach_client(&tas->i2c);
fail:
mutex_destroy(&tas->mtx);
kfree(tas);
return -ENODEV;
}
-static int tas_i2c_detach(struct i2c_client *client)
+static int tas_i2c_remove(struct i2c_client *client)
{
- struct tas *tas = container_of(client, struct tas, i2c);
- int err;
+ struct tas *tas = i2c_get_clientdata(client);
u8 tmp = TAS_ACR_ANALOG_PDOWN;
- if ((err = i2c_detach_client(client)))
- return err;
aoa_codec_unregister(&tas->codec);
of_node_put(tas->codec.node);
return 0;
}
+static const struct i2c_device_id tas_i2c_id[] = {
+ { "aoa_codec_tas", 0 },
+ { }
+};
+
static struct i2c_driver tas_driver = {
.driver = {
.name = "aoa_codec_tas",
.owner = THIS_MODULE,
},
.attach_adapter = tas_i2c_attach,
- .detach_client = tas_i2c_detach,
+ .probe = tas_i2c_probe,
+ .remove = tas_i2c_remove,
+ .id_table = tas_i2c_id,
};
static int __init tas_init(void)
return i;
}
-static int __devinit aaci_probe(struct amba_device *dev, void *id)
+static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
{
struct aaci *aaci;
int ret, i;
switch (resetgpio_action) {
case RESETGPIO_NORMAL_ALTFUNC:
if (reset_gpio == 113)
- mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+ mode = 113 | GPIO_ALT_FN_2_OUT;
if (reset_gpio == 95)
mode = 95 | GPIO_ALT_FN_1_OUT;
break;
int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
{
int ret;
- struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;
+ pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
if (pdata) {
switch (pdata->reset_gpio) {
{
struct snd_ctl_elem_value *control;
int result;
-
- control = kmalloc(sizeof(*control), GFP_KERNEL);
- if (control == NULL)
- return -ENOMEM;
- if (copy_from_user(control, _control, sizeof(*control))) {
- kfree(control);
- return -EFAULT;
- }
+
+ control = memdup_user(_control, sizeof(*control));
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
snd_power_lock(card);
result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
if (result >= 0)
struct snd_card *card;
int result;
- control = kmalloc(sizeof(*control), GFP_KERNEL);
- if (control == NULL)
- return -ENOMEM;
- if (copy_from_user(control, _control, sizeof(*control))) {
- kfree(control);
- return -EFAULT;
- }
+ control = memdup_user(_control, sizeof(*control));
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
card = file->card;
snd_power_lock(card);
result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
if (op_flag > 0) {
if (size > 1024 * 128) /* sane value */
return -EINVAL;
- new_data = kmalloc(size, GFP_KERNEL);
- if (new_data == NULL)
- return -ENOMEM;
- if (copy_from_user(new_data, tlv, size)) {
- kfree(new_data);
- return -EFAULT;
- }
+
+ new_data = memdup_user(tlv, size);
+ if (IS_ERR(new_data))
+ return PTR_ERR(new_data);
change = ue->tlv_data_size != size;
if (!change)
change = memcmp(ue->tlv_data, new_data, size);
{
struct snd_jack *jack = device->device_data;
+ if (jack->private_free)
+ jack->private_free(jack);
+
/* If the input device is registered with the input subsystem
* then we need to use a different deallocator. */
if (jack->registered)
if (! (runtime = substream->runtime))
return -ENOTTY;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (data == NULL)
- return -ENOMEM;
/* only fifo_size is different, so just copy all */
- if (copy_from_user(data, data32, sizeof(*data32))) {
- err = -EFAULT;
- goto error;
- }
+ data = memdup_user(data32, sizeof(*data32));
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
if (refine)
err = snd_pcm_hw_refine(substream, data);
else
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_uframes_t pos;
- snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base;
- snd_pcm_sframes_t delta;
+ snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base;
+ snd_pcm_sframes_t hdelta, delta;
+ unsigned long jdelta;
+ old_hw_ptr = runtime->status->hw_ptr;
pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
if (pos == SNDRV_PCM_POS_XRUN) {
xrun(substream);
new_hw_ptr = hw_base + pos;
}
}
- if (delta > runtime->period_size) {
+
+ /* Do jiffies check only in xrun_debug mode */
+ if (!xrun_debug(substream))
+ goto no_jiffies_check;
+
+ /* Skip the jiffies check for hardwares with BATCH flag.
+ * Such hardware usually just increases the position at each IRQ,
+ * thus it can't give any strange position.
+ */
+ if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
+ goto no_jiffies_check;
+ hdelta = new_hw_ptr - old_hw_ptr;
+ jdelta = jiffies - runtime->hw_ptr_jiffies;
+ if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ delta = jdelta /
+ (((runtime->period_size * HZ) / runtime->rate)
+ + HZ/100);
+ hw_ptr_error(substream,
+ "hw_ptr skipping! [Q] "
+ "(pos=%ld, delta=%ld, period=%ld, "
+ "jdelta=%lu/%lu/%lu)\n",
+ (long)pos, (long)hdelta,
+ (long)runtime->period_size, jdelta,
+ ((hdelta * HZ) / runtime->rate), delta);
+ hw_ptr_interrupt = runtime->hw_ptr_interrupt +
+ runtime->period_size * delta;
+ if (hw_ptr_interrupt >= runtime->boundary)
+ hw_ptr_interrupt -= runtime->boundary;
+ /* rebase to interrupt position */
+ hw_base = new_hw_ptr = hw_ptr_interrupt;
+ /* align hw_base to buffer_size */
+ hw_base -= hw_base % runtime->buffer_size;
+ delta = 0;
+ }
+ no_jiffies_check:
+ if (delta > runtime->period_size + runtime->period_size / 2) {
hw_ptr_error(substream,
"Lost interrupts? "
"(stream=%i, delta=%ld, intr_ptr=%ld)\n",
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
+ runtime->hw_ptr_jiffies = jiffies;
runtime->hw_ptr_interrupt = hw_ptr_interrupt;
return snd_pcm_update_hw_ptr_post(substream, runtime);
snd_pcm_uframes_t pos;
snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
snd_pcm_sframes_t delta;
+ unsigned long jdelta;
old_hw_ptr = runtime->status->hw_ptr;
pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
new_hw_ptr = hw_base + pos;
delta = new_hw_ptr - old_hw_ptr;
+ jdelta = jiffies - runtime->hw_ptr_jiffies;
if (delta < 0) {
delta += runtime->buffer_size;
if (delta < 0) {
hw_ptr_error(substream,
"Unexpected hw_pointer value [2] "
- "(stream=%i, pos=%ld, old_ptr=%ld)\n",
+ "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n",
substream->stream, (long)pos,
- (long)old_hw_ptr);
+ (long)old_hw_ptr, jdelta);
return 0;
}
hw_base += runtime->buffer_size;
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (delta > runtime->period_size && runtime->periods > 1) {
+ /* Do jiffies check only in xrun_debug mode */
+ if (xrun_debug(substream) &&
+ ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
- "(pos=%ld, delta=%ld, period=%ld)\n",
+ "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
(long)pos, (long)delta,
- (long)runtime->period_size);
+ (long)runtime->period_size, jdelta,
+ ((delta * HZ) / runtime->rate));
return 0;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
+ runtime->hw_ptr_jiffies = jiffies;
return snd_pcm_update_hw_ptr_post(substream, runtime);
}
struct snd_pcm_hw_params *params;
int err;
- params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(params, _params, sizeof(*params))) {
- err = -EFAULT;
- goto out;
- }
+ params = memdup_user(_params, sizeof(*params));
+ if (IS_ERR(params))
+ return PTR_ERR(params);
+
err = snd_pcm_hw_refine(substream, params);
if (copy_to_user(_params, params, sizeof(*params))) {
if (!err)
err = -EFAULT;
}
-out:
+
kfree(params);
return err;
}
struct snd_pcm_hw_params *params;
int err;
- params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(params, _params, sizeof(*params))) {
- err = -EFAULT;
- goto out;
- }
+ params = memdup_user(_params, sizeof(*params));
+ if (IS_ERR(params))
+ return PTR_ERR(params);
+
err = snd_pcm_hw_params(substream, params);
if (copy_to_user(_params, params, sizeof(*params))) {
if (!err)
err = -EFAULT;
}
-out:
+
kfree(params);
return err;
}
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_trigger_tstamp(substream);
+ runtime->hw_ptr_jiffies = jiffies;
runtime->status->state = state;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
{
if (substream->runtime->trigger_master != substream)
return 0;
+ /* The jiffies check in snd_pcm_update_hw_ptr*() is done by
+ * a delta betwen the current jiffies, this gives a large enough
+ * delta, effectively to skip the check once.
+ */
+ substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
return substream->ops->trigger(substream,
push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH :
SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
return -EFAULT;
if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
return -EFAULT;
- bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
- if (bufs == NULL)
- return -ENOMEM;
- if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
- kfree(bufs);
- return -EFAULT;
- }
+
+ bufs = memdup_user(xfern.bufs,
+ sizeof(void *) * runtime->channels);
+ if (IS_ERR(bufs))
+ return PTR_ERR(bufs);
result = snd_pcm_lib_writev(substream, bufs, xfern.frames);
kfree(bufs);
__put_user(result, &_xfern->result);
return -EFAULT;
if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
return -EFAULT;
- bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
- if (bufs == NULL)
- return -ENOMEM;
- if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
- kfree(bufs);
- return -EFAULT;
- }
+
+ bufs = memdup_user(xfern.bufs,
+ sizeof(void *) * runtime->channels);
+ if (IS_ERR(bufs))
+ return PTR_ERR(bufs);
result = snd_pcm_lib_readv(substream, bufs, xfern.frames);
kfree(bufs);
__put_user(result, &_xfern->result);
int err;
params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
- if (!oparams) {
- err = -ENOMEM;
- goto out;
- }
+ if (!params)
+ return -ENOMEM;
- if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
- err = -EFAULT;
+ oparams = memdup_user(_oparams, sizeof(*oparams));
+ if (IS_ERR(oparams)) {
+ err = PTR_ERR(oparams);
goto out;
}
snd_pcm_hw_convert_from_old_params(params, oparams);
if (!err)
err = -EFAULT;
}
+
+ kfree(oparams);
out:
kfree(params);
- kfree(oparams);
return err;
}
int err;
params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
- if (!oparams) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
- err = -EFAULT;
+ if (!params)
+ return -ENOMEM;
+
+ oparams = memdup_user(_oparams, sizeof(*oparams));
+ if (IS_ERR(oparams)) {
+ err = PTR_ERR(oparams);
goto out;
}
snd_pcm_hw_convert_from_old_params(params, oparams);
if (!err)
err = -EFAULT;
}
+
+ kfree(oparams);
out:
kfree(params);
- kfree(oparams);
return err;
}
#endif /* CONFIG_SND_SUPPORT_OLD_API */
struct snd_seq_port_info *data;
mm_segment_t fs;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (! data)
- return -ENOMEM;
+ data = memdup_user(data32, sizeof(*data32));
+ if (IS_ERR(data))
+ return PTR_ERR(data);
- if (copy_from_user(data, data32, sizeof(*data32)) ||
- get_user(data->flags, &data32->flags) ||
+ if (get_user(data->flags, &data32->flags) ||
get_user(data->time_queue, &data32->time_queue))
goto error;
data->kernel = NULL;
struct list_head *p;
int err = 0;
- ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL);
- if (! ginfo)
- return -ENOMEM;
- if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) {
- kfree(ginfo);
- return -EFAULT;
- }
+ ginfo = memdup_user(_ginfo, sizeof(*ginfo));
+ if (IS_ERR(ginfo))
+ return PTR_ERR(ginfo);
+
tid = ginfo->tid;
memset(ginfo, 0, sizeof(*ginfo));
ginfo->tid = tid;
uinfo->value.enumerated.items = chip->max_treble + 1;
if (uinfo->value.enumerated.item > chip->max_treble)
uinfo->value.enumerated.item = chip->max_treble;
- sprintf(uinfo->value.enumerated.name, "%d",
- PCSP_CALC_RATE(uinfo->value.enumerated.item));
+ sprintf(uinfo->value.enumerated.name, "%lu",
+ (unsigned long)PCSP_CALC_RATE(uinfo->value.enumerated.item));
return 0;
}
if (err < 0)
goto _err;
- sprintf(card->longname, "%s at 0x%lx, irq %d speed %d div %d outs %d ins %d adaptor %s droponfull %d",
+ sprintf(card->longname, "%s [%s] at %#lx, irq %d",
card->shortname,
- uart->base,
- uart->irq,
- uart->speed,
- (int)uart->divisor,
- outs[dev],
- ins[dev],
adaptor_names[uart->adaptor],
- uart->drop_on_full);
+ uart->base,
+ uart->irq);
snd_card_set_dev(card, &devptr->dev);
To compile this driver as a module, choose M here: the module
will be called snd-wavefront.
-config SND_WAVEFRONT_FIRMWARE_IN_KERNEL
- bool "In-kernel firmware for Wavefront"
- depends on SND_WAVEFRONT
- default y
- help
- Say Y here to include the static firmware for FX DSP built in
- the kernel for the Wavefront driver. If you choose N here,
- you need to install the firmware files from the
- alsa-firmware package.
-
config SND_MSND_PINNACLE
tristate "Turtle Beach MultiSound Pinnacle/Fiji driver"
depends on X86 && EXPERIMENTAL
static struct snd_pcm_hardware snd_msnd_playback = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
static struct snd_pcm_hardware snd_msnd_capture = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags)
{
- int err = -ENOMEM;
- unsigned char *kbuf = kmalloc(size, GFP_KERNEL);
- if (kbuf) {
- if (copy_from_user(kbuf, buf, size))
- err = -EFAULT;
- else
- err = snd_sb_csp_load(p, kbuf, size, load_flags);
- kfree(kbuf);
- }
+ int err;
+ unsigned char *kbuf;
+
+ kbuf = memdup_user(buf, size);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
+
+ err = snd_sb_csp_load(p, kbuf, size, load_flags);
+
+ kfree(kbuf);
return err;
}
#define WAIT_IDLE 0xff
-#ifdef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
-#include "yss225.c"
-static const struct firmware yss225_registers_firmware = {
- .data = (u8 *)yss225_registers,
- .size = sizeof yss225_registers
-};
-#endif
-
static int
wavefront_fx_idle (snd_wavefront_t *dev)
"> 512 bytes to FX\n");
return -EIO;
}
- page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL);
- if (!page_data)
- return -ENOMEM;
- if (copy_from_user (page_data,
- (unsigned char __user *) r.data[3],
- r.data[2] * sizeof(short))) {
- kfree(page_data);
- return -EFAULT;
- }
+ page_data = memdup_user((unsigned char __user *)
+ r.data[3],
+ r.data[2] * sizeof(short));
+ if (IS_ERR(page_data))
+ return PTR_ERR(page_data);
pd = page_data;
}
if (dev->fx_initialized)
return 0;
-#ifdef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
- firmware = &yss225_registers_firmware;
-#else
err = request_firmware(&firmware, "yamaha/yss225_registers.bin",
dev->card->dev);
if (err < 0) {
err = -1;
goto out;
}
-#endif
for (i = 0; i + 1 < firmware->size; i += 2) {
if (firmware->data[i] >= 8 && firmware->data[i] < 16) {
err = 0;
out:
-#ifndef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
release_firmware(firmware);
-#endif
return err;
}
-#ifndef CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL
MODULE_FIRMWARE("yamaha/yss225_registers.bin");
-#endif
break;
case WFCTL_WFCMD:
- wc = kmalloc(sizeof(*wc), GFP_KERNEL);
- if (! wc)
- return -ENOMEM;
- if (copy_from_user (wc, argp, sizeof (*wc)))
- err = -EFAULT;
- else if (wavefront_synth_control (acard, wc) < 0)
+ wc = memdup_user(argp, sizeof(*wc));
+ if (IS_ERR(wc))
+ return PTR_ERR(wc);
+
+ if (wavefront_synth_control (acard, wc) < 0)
err = -EIO;
else if (copy_to_user (argp, wc, sizeof (*wc)))
err = -EFAULT;
+++ /dev/null
-/*
- * Copyright (c) 1998-2002 by Paul Davis <pbd@op.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* weird stuff, derived from port I/O tracing with dosemu */
-
-static const struct {
- unsigned char addr;
- unsigned char data;
-} yss225_registers[] __devinitdata = {
-/* Set all bits for all channels on the MOD unit to zero */
-{ WAIT_IDLE }, { 0xe, 0x10 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x11 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x12 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x13 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x14 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x15 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x16 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x17 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x18 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x19 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x20 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x21 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x22 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x23 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x24 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x25 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x26 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x27 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x28 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x29 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x30 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x31 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x32 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x33 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x34 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x35 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x36 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x37 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x38 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x39 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x40 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x41 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x42 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x43 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x44 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x45 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x46 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x47 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x48 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x49 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x50 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x51 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x52 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x53 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x54 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x55 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x56 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x57 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x58 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x59 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x60 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x61 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x62 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x63 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x64 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x65 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x66 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x67 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x68 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x69 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x70 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x71 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x72 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x73 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x74 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x75 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x76 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x77 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x78 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x79 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x80 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x81 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x82 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x83 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x84 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x85 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x86 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x87 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x88 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x89 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x90 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x91 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x92 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x93 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x94 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x95 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x96 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x97 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x98 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x99 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xaa }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xab }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xac }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xad }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xae }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xaf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xba }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbe }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xca }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xce }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xda }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xea }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xeb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xec }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xed }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xee }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xef }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfa }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfe }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xff }, { 0xf, 0x00 },
-
-/* XXX But why do this twice? */
-{ WAIT_IDLE }, { 0xe, 0x10 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x11 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x12 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x13 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x14 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x15 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x16 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x17 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x18 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x19 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x20 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x21 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x22 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x23 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x24 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x25 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x26 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x27 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x28 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x29 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x30 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x31 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x32 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x33 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x34 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x35 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x36 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x37 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x38 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x39 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x40 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x41 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x42 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x43 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x44 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x45 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x46 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x47 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x48 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x49 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x50 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x51 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x52 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x53 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x54 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x55 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x56 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x57 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x58 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x59 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x60 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x61 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x62 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x63 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x64 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x65 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x66 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x67 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x68 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x69 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x70 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x71 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x72 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x73 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x74 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x75 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x76 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x77 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x78 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x79 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x80 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x81 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x82 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x83 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x84 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x85 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x86 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x87 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x88 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x89 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x90 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x91 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x92 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x93 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x94 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x95 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x96 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x97 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x98 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x99 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xaa }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xab }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xac }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xad }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xae }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xaf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xba }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbe }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xca }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xce }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xda }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xea }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xeb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xec }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xed }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xee }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xef }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfa }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfe }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xff }, { 0xf, 0x00 },
-
-/* mute on */
-{ WAIT_IDLE }, { 0x8, 0x02 },
-
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 },
-
-/* either because of stupidity by TB's programmers, or because it
- actually does something, rezero the MOD page. */
-{ WAIT_IDLE }, { 0xe, 0x10 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x11 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x12 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x13 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x14 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x15 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x16 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x17 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x18 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x19 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x1f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x20 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x21 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x22 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x23 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x24 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x25 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x26 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x27 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x28 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x29 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x2f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x30 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x31 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x32 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x33 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x34 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x35 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x36 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x37 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x38 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x39 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x3f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x40 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x41 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x42 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x43 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x44 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x45 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x46 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x47 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x48 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x49 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x4f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x50 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x51 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x52 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x53 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x54 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x55 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x56 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x57 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x58 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x59 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x5f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x60 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x61 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x62 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x63 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x64 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x65 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x66 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x67 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x68 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x69 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x6f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x70 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x71 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x72 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x73 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x74 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x75 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x76 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x77 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x78 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x79 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x7f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x80 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x81 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x82 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x83 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x84 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x85 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x86 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x87 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x88 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x89 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x8f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x90 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x91 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x92 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x93 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x94 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x95 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x96 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x97 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x98 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x99 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9a }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9b }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9c }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9d }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9e }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0x9f }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xa9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xaa }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xab }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xac }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xad }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xae }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xaf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xb9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xba }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbe }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xbf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xc9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xca }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xce }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xcf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xd9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xda }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xe9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xea }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xeb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xec }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xed }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xee }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xef }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf0 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf1 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf2 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf3 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf4 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf5 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf6 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf7 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf8 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xf9 }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfa }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfb }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfc }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfd }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xfe }, { 0xf, 0x00 },
-{ WAIT_IDLE }, { 0xe, 0xff }, { 0xf, 0x00 },
-
-/* load page zero */
-{ 0x9, 0x05 }, { 0xb, 0x00 }, { 0xa, 0x00 },
-
-{ 0xd, 0x01 }, { 0xc, 0x7c }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1e }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xf5 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x11 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x32 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x13 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x14 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x76 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x18 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x19 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0x1a }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0x17 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x10 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0xa0 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xd1 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0xf2 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x13 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xf4 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xe0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x15 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x16 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x17 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x50 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x71 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x92 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xb3 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xa0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xd4 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xf5 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x70 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0xa0 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x11 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x16 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x10 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x17 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1d }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xdf }, { WAIT_IDLE },
-
-/* Now load page one */
-{ 0x9, 0x05 }, { 0xb, 0x01 }, { 0xa, 0x00 },
-
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x19 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1f }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xd8 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x19 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x18 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0xfa }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1a }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xfb }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xa0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xd7 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xf7 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1c }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x3c }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x3f }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xdf }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x5d }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x7d }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0x9e }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xbe }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x03 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xdb }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xdb }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xe0 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xfb }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xfb }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1b }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x02 }, { 0xa, 0x00 },
-
-{ 0xc, 0xc4 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x25 }, { WAIT_IDLE },
-{ 0xc, 0x01 }, { WAIT_IDLE },
-{ 0xc, 0x06 }, { WAIT_IDLE },
-{ 0xc, 0xc4 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x25 }, { WAIT_IDLE },
-{ 0xc, 0x01 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x04 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x04 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x05 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x44 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x03 }, { 0xa, 0x00 },
-
-{ 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x47 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x06 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x70 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x42 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x42 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x42 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x42 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x40 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x04 }, { 0xa, 0x00 },
-
-{ 0xc, 0x63 }, { WAIT_IDLE },
-{ 0xc, 0x03 }, { WAIT_IDLE },
-{ 0xc, 0x26 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x2c }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x24 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x2e }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x01 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x22 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x22 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x22 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x62 }, { WAIT_IDLE },
-{ 0xc, 0x02 }, { WAIT_IDLE },
-{ 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xc, 0x01 }, { WAIT_IDLE },
-{ 0xc, 0x21 }, { WAIT_IDLE },
-{ 0xc, 0x01 }, { WAIT_IDLE },
-
-/* Load memory area (page six) */
-{ 0x9, 0x01 }, { 0xb, 0x06 },
-
-{ 0xa, 0x00 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x02 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x04 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x06 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x08 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x0a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x0c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x0e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x10 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x12 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x14 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x16 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x18 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x1a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x1c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x1e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x20 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x22 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x24 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x26 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x28 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x2a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x2c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x2e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x30 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x32 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x34 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x36 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x38 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x3a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x3c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x3e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x42 }, { 0xd, 0x03 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x44 }, { 0xd, 0x01 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x46 }, { 0xd, 0x0a }, { 0xc, 0x21 }, { WAIT_IDLE },
-{ 0xa, 0x48 }, { 0xd, 0x0d }, { 0xc, 0x23 }, { WAIT_IDLE },
-{ 0xa, 0x4a }, { 0xd, 0x23 }, { 0xc, 0x1b }, { WAIT_IDLE },
-{ 0xa, 0x4c }, { 0xd, 0x37 }, { 0xc, 0x8f }, { WAIT_IDLE },
-{ 0xa, 0x4e }, { 0xd, 0x45 }, { 0xc, 0x77 }, { WAIT_IDLE },
-{ 0xa, 0x50 }, { 0xd, 0x52 }, { 0xc, 0xe2 }, { WAIT_IDLE },
-{ 0xa, 0x52 }, { 0xd, 0x1c }, { 0xc, 0x92 }, { WAIT_IDLE },
-{ 0xa, 0x54 }, { 0xd, 0x1c }, { 0xc, 0x52 }, { WAIT_IDLE },
-{ 0xa, 0x56 }, { 0xd, 0x07 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x58 }, { 0xd, 0x2f }, { 0xc, 0xc6 }, { WAIT_IDLE },
-{ 0xa, 0x5a }, { 0xd, 0x0b }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x5c }, { 0xd, 0x30 }, { 0xc, 0x06 }, { WAIT_IDLE },
-{ 0xa, 0x5e }, { 0xd, 0x17 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x60 }, { 0xd, 0x3d }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xa, 0x62 }, { 0xd, 0x29 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x64 }, { 0xd, 0x3e }, { 0xc, 0x41 }, { WAIT_IDLE },
-{ 0xa, 0x66 }, { 0xd, 0x39 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x68 }, { 0xd, 0x4c }, { 0xc, 0x48 }, { WAIT_IDLE },
-{ 0xa, 0x6a }, { 0xd, 0x49 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x6c }, { 0xd, 0x4c }, { 0xc, 0x6c }, { WAIT_IDLE },
-{ 0xa, 0x6e }, { 0xd, 0x11 }, { 0xc, 0xd2 }, { WAIT_IDLE },
-{ 0xa, 0x70 }, { 0xd, 0x16 }, { 0xc, 0x0c }, { WAIT_IDLE },
-{ 0xa, 0x72 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x74 }, { 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xa, 0x76 }, { 0xd, 0x0f }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x78 }, { 0xd, 0x00 }, { 0xc, 0x80 }, { WAIT_IDLE },
-{ 0xa, 0x7a }, { 0xd, 0x13 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x7c }, { 0xd, 0x80 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x7e }, { 0xd, 0x80 }, { 0xc, 0x80 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x07 }, { 0xa, 0x00 },
-
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x08 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0xe9 }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x8c }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x8c }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x1a }, { 0xc, 0x75 }, { WAIT_IDLE },
-{ 0xd, 0x0d }, { 0xc, 0x8b }, { WAIT_IDLE },
-{ 0xd, 0x04 }, { 0xc, 0xe9 }, { WAIT_IDLE },
-{ 0xd, 0x0b }, { 0xc, 0x16 }, { WAIT_IDLE },
-{ 0xd, 0x1a }, { 0xc, 0x38 }, { WAIT_IDLE },
-{ 0xd, 0x0d }, { 0xc, 0xc8 }, { WAIT_IDLE },
-{ 0xd, 0x04 }, { 0xc, 0x6f }, { WAIT_IDLE },
-{ 0xd, 0x0b }, { 0xc, 0x91 }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x8f }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x62 }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x62 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x7b }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x97 }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0x97 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x52 }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0xf6 }, { WAIT_IDLE },
-{ 0xd, 0x06 }, { 0xc, 0xf6 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x19 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x55 }, { WAIT_IDLE },
-{ 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-
-/* Now setup the MOD area. */
-{ 0xe, 0x01 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x02 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x03 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x04 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x05 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x06 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x07 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x08 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x09 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0a }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0b }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0c }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0d }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0e }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0f }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-
-{ 0xe, 0xb0 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb1 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb2 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb3 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb4 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb5 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb6 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb7 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb8 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb9 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xba }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xbb }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xbc }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xbd }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xbe }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xbf }, { 0xf, 0x20 }, { WAIT_IDLE },
-
-{ 0xe, 0xf0 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf1 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf2 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf3 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf4 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf5 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf6 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf7 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf8 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf9 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xfa }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xfb }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xfc }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xfd }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xfe }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xff }, { 0xf, 0x20 }, { WAIT_IDLE },
-
-{ 0xe, 0x10 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x11 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x12 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x13 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x14 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x15 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x16 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x17 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x18 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x19 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x1a }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x1b }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x1c }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x1d }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x1e }, { 0xf, 0x40 }, { WAIT_IDLE },
-{ 0xe, 0x1f }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x20 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x21 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x22 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x23 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x24 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x25 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x26 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x27 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x28 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x29 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x2a }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x2b }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x2c }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x2d }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x2e }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x2f }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x30 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x31 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x32 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x33 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x34 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x35 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x36 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x37 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x38 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x39 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x3a }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x3b }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x3c }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x3d }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x3e }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x3f }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0x40 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x41 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x42 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x43 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x44 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x45 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x46 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x47 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x48 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x49 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x4a }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x4b }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x4c }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x4d }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x4e }, { 0xf, 0x0e }, { WAIT_IDLE },
-{ 0xe, 0x4f }, { 0xf, 0x0e }, { WAIT_IDLE },
-{ 0xe, 0x50 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x51 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x52 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x53 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x54 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x55 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x56 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x57 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x58 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x59 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x5a }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x5b }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x5c }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x5d }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x5e }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x5f }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x60 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x61 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x62 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x63 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x64 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x65 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x66 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x67 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x68 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x69 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x6a }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x6b }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x6c }, { 0xf, 0x40 }, { WAIT_IDLE },
-{ 0xe, 0x6d }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x6e }, { 0xf, 0x40 }, { WAIT_IDLE },
-{ 0xe, 0x6f }, { 0xf, 0x40 }, { WAIT_IDLE },
-{ 0xe, 0x70 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x71 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x72 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x73 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x74 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x75 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x76 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x77 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x78 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x79 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x7a }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x7b }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x7c }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x7d }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x7e }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x7f }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x80 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x81 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x82 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x83 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x84 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x85 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x86 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x87 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x88 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x89 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x8a }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x8b }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x8c }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x8d }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x8e }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x8f }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x90 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x91 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x92 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x93 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x94 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x95 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x96 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x97 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x98 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x99 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x9a }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x9b }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x9c }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x9d }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x9e }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x9f }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa8 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa9 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xaa }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xab }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xac }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xad }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xae }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xaf }, { 0xf, 0x00 }, { WAIT_IDLE },
-
-{ 0xe, 0xc0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc8 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc9 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xca }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xcb }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xcc }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xcd }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xce }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xcf }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd8 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd9 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xda }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xdb }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xdc }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xdd }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xde }, { 0xf, 0x10 }, { WAIT_IDLE },
-{ 0xe, 0xdf }, { 0xf, 0x10 }, { WAIT_IDLE },
-{ 0xe, 0xe0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe8 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe9 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xea }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xeb }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xec }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xed }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xee }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xef }, { 0xf, 0x00 }, { WAIT_IDLE },
-
-{ 0xe, 0x01 }, { 0xf, 0x00 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x01 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x02 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x03 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x04 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x05 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x06 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x07 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x08 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x09 }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0a }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0b }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0c }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0d }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0e }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x0f }, { 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-
-/* mute on */
-{ 0x8, 0x02 },
-
-/* Now set the coefficients and so forth for the programs above */
-{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x4b }, { 0xd, 0x03 }, { 0xc, 0x11 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x4d }, { 0xd, 0x01 }, { 0xc, 0x32 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x01 }, { 0xa, 0x40 }, { 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xb, 0x01 }, { 0xa, 0x41 }, { 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x47 }, { 0xd, 0x01 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x4a }, { 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x00 }, { 0xd, 0x01 }, { 0xc, 0x1c }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x44 }, { 0xd, 0x01 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x42 }, { 0xd, 0x01 }, { 0xc, 0x1a }, { WAIT_IDLE },
-{ 0xb, 0x00 }, { 0xa, 0x43 }, { 0xd, 0x01 }, { 0xc, 0x20 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x01 }, { 0xa, 0x40 }, { 0xd, 0x02 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xb, 0x01 }, { 0xa, 0x41 }, { 0xd, 0x02 }, { 0xc, 0x60 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x44 }, { 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x42 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x43 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x40 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x41 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x51 }, { 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x50 }, { 0xd, 0x06 }, { 0xc, 0x40 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x4f }, { 0xd, 0x03 }, { 0xc, 0x81 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x53 }, { 0xd, 0x1a }, { 0xc, 0x76 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x54 }, { 0xd, 0x0d }, { 0xc, 0x8b }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x55 }, { 0xd, 0x04 }, { 0xc, 0xe9 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x56 }, { 0xd, 0x0b }, { 0xc, 0x17 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x57 }, { 0xd, 0x1a }, { 0xc, 0x38 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x58 }, { 0xd, 0x0d }, { 0xc, 0xc9 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x59 }, { 0xd, 0x04 }, { 0xc, 0x6f }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x5a }, { 0xd, 0x0b }, { 0xc, 0x91 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x73 }, { 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x74 }, { 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x75 }, { 0xd, 0x04 }, { 0xc, 0xd9 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x76 }, { 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x77 }, { 0xd, 0x14 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x78 }, { 0xd, 0x0d }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x79 }, { 0xd, 0x04 }, { 0xc, 0xd9 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7a }, { 0xd, 0x05 }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x5e }, { 0xd, 0x03 }, { 0xc, 0x68 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x5c }, { 0xd, 0x04 }, { 0xc, 0x31 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x5d }, { 0xd, 0x04 }, { 0xc, 0x31 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x62 }, { 0xd, 0x03 }, { 0xc, 0x52 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x60 }, { 0xd, 0x04 }, { 0xc, 0x76 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x61 }, { 0xd, 0x04 }, { 0xc, 0x76 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x66 }, { 0xd, 0x03 }, { 0xc, 0x2e }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x64 }, { 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x65 }, { 0xd, 0x04 }, { 0xc, 0xda }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x6a }, { 0xd, 0x02 }, { 0xc, 0xf6 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x68 }, { 0xd, 0x05 }, { 0xc, 0x62 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x69 }, { 0xd, 0x05 }, { 0xc, 0x62 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x46 }, { 0xd, 0x0a }, { 0xc, 0x22 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x48 }, { 0xd, 0x0d }, { 0xc, 0x24 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x6e }, { 0xd, 0x11 }, { 0xc, 0xd3 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x70 }, { 0xd, 0x15 }, { 0xc, 0xcb }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x52 }, { 0xd, 0x20 }, { 0xc, 0x93 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x54 }, { 0xd, 0x20 }, { 0xc, 0x54 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x4a }, { 0xd, 0x27 }, { 0xc, 0x1d }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x58 }, { 0xd, 0x2f }, { 0xc, 0xc8 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x5c }, { 0xd, 0x30 }, { 0xc, 0x07 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x4c }, { 0xd, 0x37 }, { 0xc, 0x90 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x60 }, { 0xd, 0x3d }, { 0xc, 0xdb }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x64 }, { 0xd, 0x3e }, { 0xc, 0x42 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x4e }, { 0xd, 0x45 }, { 0xc, 0x78 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x68 }, { 0xd, 0x4c }, { 0xc, 0x48 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x6c }, { 0xd, 0x4c }, { 0xc, 0x6c }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x50 }, { 0xd, 0x52 }, { 0xc, 0xe2 }, { WAIT_IDLE },
-{ 0xb, 0x06 }, { 0xa, 0x42 }, { 0xd, 0x02 }, { 0xc, 0xba }, { WAIT_IDLE },
-
-/* Some settings (?) */
-{ WAIT_IDLE }, { 0xe, 0x1e }, { 0xf, 0x14 },
-{ WAIT_IDLE }, { 0xe, 0xde }, { 0xf, 0x20 },
-{ WAIT_IDLE }, { 0xe, 0xdf }, { 0xf, 0x20 },
-
-/* some more coefficients */
-{ WAIT_IDLE }, { 0xb, 0x06 }, { 0xa, 0x78 }, { 0xd, 0x00 }, { 0xc, 0x40 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x03 }, { 0xd, 0x0f }, { 0xc, 0xff },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x0b }, { 0xd, 0x0f }, { 0xc, 0xff },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x02 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x0a }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ WAIT_IDLE }, { 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 },
-
-/* Now, for some strange reason, lets reload every page
- and all the coefficients over again. I have *NO* idea
- why this is done. I do know that no sound is produced
- is this phase is omitted. */
-{ 0x9, 0x05 }, { 0xb, 0x00 }, { 0xa, 0x10 },
-
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x02 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x01 }, { 0xa, 0x10 },
-
-{ 0xd, 0x01 }, { 0xc, 0xc0 }, { WAIT_IDLE },
-{ 0xd, 0x01 }, { 0xc, 0xfa }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x1a }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-
-{ WAIT_IDLE }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x02 }, { 0xa, 0x10 },
-
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x46 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x03 }, { 0xa, 0x10 },
-
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x04 }, { 0xa, 0x10 },
-
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xc, 0x00 }, { WAIT_IDLE },
-
-/* Page six v.2 */
-{ 0x9, 0x01 }, { 0xb, 0x06 },
-
-{ 0xa, 0x10 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x12 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x14 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x16 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x18 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x1a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x1c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x1e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x20 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x22 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x24 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x26 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x28 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x2a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x2c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x2e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x30 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x32 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x34 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x36 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x38 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x3a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x3c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xa, 0x3e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-
-{ 0x9, 0x05 }, { 0xb, 0x07 }, { 0xa, 0x10 },
-
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-
-{ 0xe, 0x01 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x02 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x03 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x04 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x05 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x06 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x07 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xb0 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb1 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb2 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb3 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb4 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb5 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb6 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xb7 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf0 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf1 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf2 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf3 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf4 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf5 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf6 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0xf7 }, { 0xf, 0x20 }, { WAIT_IDLE },
-{ 0xe, 0x10 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x11 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x12 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x13 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x14 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x15 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x16 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x17 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x20 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x21 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x22 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x23 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x24 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x25 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x26 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x27 }, { 0xf, 0xff }, { WAIT_IDLE },
-{ 0xe, 0x30 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x31 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x32 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x33 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x34 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x35 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x36 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x37 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x40 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x41 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x42 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x43 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x44 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x45 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x46 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x47 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x50 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x51 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x52 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x53 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x54 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x55 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x56 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x57 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x60 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x61 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x62 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x63 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x64 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x65 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x66 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x67 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x70 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x71 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x72 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x73 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x74 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x75 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x76 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x77 }, { 0xf, 0xc0 }, { WAIT_IDLE },
-{ 0xe, 0x80 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x81 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x82 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x83 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x84 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x85 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x86 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x87 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x90 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x91 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x92 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x93 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x94 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x95 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x96 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x97 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xa7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xc7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xd7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe0 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe1 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe2 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe3 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe4 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe5 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe6 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0xe7 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x00 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x02 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x03 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x04 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x05 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x06 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-{ 0xe, 0x01 }, { 0xf, 0x07 }, { WAIT_IDLE },
-{ 0xe, 0x02 }, { 0xf, 0x01 }, { WAIT_IDLE },
-
-{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x45 }, { 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x48 }, { 0xd, 0x0f }, { 0xc, 0xff }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7b }, { 0xd, 0x04 }, { 0xc, 0xcc }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7d }, { 0xd, 0x04 }, { 0xc, 0xcc }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x7e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x46 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x49 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x47 }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x4a }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x00 }, { WAIT_IDLE },
-
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x00 }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x00 }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x01 }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x01 }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x02 }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x02 }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x03 }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x03 }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x04 }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x04 }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x05 }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x05 }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x06 }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x06 }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x07 }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x07 }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x08 }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x08 }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x09 }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x09 }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0a }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0a }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0b }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0b }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x00 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x28 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x51 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0x7a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0xa3 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0xcc },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0c }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0c }, { 0xc, 0xf5 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x1e },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x47 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x70 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0x99 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0xc2 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0d }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0d }, { 0xc, 0xeb },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x14 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x3d },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x66 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0x8f },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0xb8 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0e }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0e }, { 0xc, 0xe1 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x0a },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x33 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x5c },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0x85 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0xae },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0xd7 },
-{ 0xb, 0x07 }, { 0xa, 0x4c }, { 0xd, 0x0f }, { 0xc, 0xff },
-{ 0xb, 0x07 }, { 0xa, 0x4e }, { 0xd, 0x0f }, { 0xc, 0xff },
-
-/* mute off */
-{ 0x8, 0x00 }, { WAIT_IDLE }
-};
}
/* nothing should be in powerdown mode */
snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0);
- end_time = jiffies + msecs_to_jiffies(100);
+ end_time = jiffies + msecs_to_jiffies(120);
do {
if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f)
goto __ready_ok;
}
static const struct snd_kcontrol_new snd_ac97_sigmatel_4speaker =
-AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", AC97_SIGMATEL_DAC2INVERT, 2, 1, 0);
+AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch",
+ AC97_SIGMATEL_DAC2INVERT, 2, 1, 0);
+/* "Sigmatel " removed due to excessive name length: */
static const struct snd_kcontrol_new snd_ac97_sigmatel_phaseinvert =
-AC97_SINGLE("Sigmatel Surround Phase Inversion Playback Switch", AC97_SIGMATEL_DAC2INVERT, 3, 1, 0);
+AC97_SINGLE("Surround Phase Inversion Playback Switch",
+ AC97_SIGMATEL_DAC2INVERT, 3, 1, 0);
static const struct snd_kcontrol_new snd_ac97_sigmatel_controls[] = {
AC97_SINGLE("Sigmatel DAC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 1, 1, 0),
.name = "HP nx6125",
.type = AC97_TUNE_MUTE_LED
},
+ {
+ .subvendor = 0x103c,
+ .subdevice = 0x3091,
+ .name = "unknown HP",
+ .type = AC97_TUNE_MUTE_LED
+ },
{ } /* terminator */
};
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = 0, /* set at runtime */
.channels_min = 2,
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX,
"Capture Volume",
"External Amplifier",
"Sigmatel 4-Speaker Stereo Playback Switch",
- "Sigmatel Surround Phase Inversion Playback ",
+ "Surround Phase Inversion Playback Switch",
NULL
};
static char *ca0106_rename_ctls[] = {
.dev_free = snd_cmipci_dev_free,
};
unsigned int val;
- long iomidi;
+ long iomidi = 0;
int integrated_midi = 0;
char modelstr[16];
int pcm_index, pcm_spdif_index;
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
case SNDRV_EMU10K1_IOCTL_CODE_POKE:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- icode = kmalloc(sizeof(*icode), GFP_KERNEL);
- if (icode == NULL)
- return -ENOMEM;
- if (copy_from_user(icode, argp, sizeof(*icode))) {
- kfree(icode);
- return -EFAULT;
- }
+
+ icode = memdup_user(argp, sizeof(*icode));
+ if (IS_ERR(icode))
+ return PTR_ERR(icode);
res = snd_emu10k1_icode_poke(emu, icode);
kfree(icode);
return res;
case SNDRV_EMU10K1_IOCTL_CODE_PEEK:
- icode = kmalloc(sizeof(*icode), GFP_KERNEL);
- if (icode == NULL)
- return -ENOMEM;
- if (copy_from_user(icode, argp, sizeof(*icode))) {
- kfree(icode);
- return -EFAULT;
- }
+ icode = memdup_user(argp, sizeof(*icode));
+ if (IS_ERR(icode))
+ return PTR_ERR(icode);
res = snd_emu10k1_icode_peek(emu, icode);
if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) {
kfree(icode);
kfree(icode);
return res;
case SNDRV_EMU10K1_IOCTL_PCM_POKE:
- ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL);
- if (ipcm == NULL)
- return -ENOMEM;
- if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
- kfree(ipcm);
- return -EFAULT;
- }
+ ipcm = memdup_user(argp, sizeof(*ipcm));
+ if (IS_ERR(ipcm))
+ return PTR_ERR(ipcm);
res = snd_emu10k1_ipcm_poke(emu, ipcm);
kfree(ipcm);
return res;
case SNDRV_EMU10K1_IOCTL_PCM_PEEK:
- ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL);
- if (ipcm == NULL)
- return -ENOMEM;
- if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
- kfree(ipcm);
- return -EFAULT;
- }
+ ipcm = memdup_user(argp, sizeof(*ipcm));
+ if (IS_ERR(ipcm))
+ return PTR_ERR(ipcm);
res = snd_emu10k1_ipcm_peek(emu, ipcm);
if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) {
kfree(ipcm);
if (newtime != curtime)
break;
}
- if (count >= 16384)
+ if (count > 16384)
break;
curtime = newtime;
}
*/
static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
{
- int i, total_nodes;
+ int i, total_nodes, function_id;
hda_nid_t nid;
total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
for (i = 0; i < total_nodes; i++, nid++) {
- codec->function_id = snd_hda_param_read(codec, nid,
+ function_id = snd_hda_param_read(codec, nid,
AC_PAR_FUNCTION_TYPE) & 0xff;
- switch (codec->function_id) {
+ switch (function_id) {
case AC_GRP_AUDIO_FUNCTION:
codec->afg = nid;
+ codec->function_id = function_id;
break;
case AC_GRP_MODEM_FUNCTION:
codec->mfg = nid;
+ codec->function_id = function_id;
break;
default:
break;
err = bus->ops.command(bus, res);
if (!err) {
struct hda_cache_head *c;
- u32 key = build_cmd_cache_key(nid, verb);
+ u32 key;
+ /* parm may contain the verb stuff for get/set amp */
+ verb = verb | (parm >> 8);
+ parm &= 0xff;
+ key = build_cmd_cache_key(nid, verb);
c = get_alloc_hash(&codec->cmd_cache, key);
if (c)
c->val = parm;
unsigned int period_bytes; /* size of the period in bytes */
unsigned int frags; /* number for period in the play buffer */
unsigned int fifo_size; /* FIFO size */
+ unsigned long start_jiffies; /* start + minimum jiffies */
+ unsigned long min_jiffies; /* minimum jiffies before position is valid */
void __iomem *sd_addr; /* stream descriptor pointer */
unsigned int opened :1;
unsigned int running :1;
unsigned int irq_pending :1;
- unsigned int irq_ignore :1;
+ unsigned int start_flag: 1; /* stream full start flag */
/*
* For VIA:
* A flag to ensure DMA position is 0
struct azx *chip = dev_id;
struct azx_dev *azx_dev;
u32 status;
- int i;
+ int i, ok;
spin_lock(&chip->reg_lock);
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
if (!azx_dev->substream || !azx_dev->running)
continue;
- /* ignore the first dummy IRQ (due to pos_adj) */
- if (azx_dev->irq_ignore) {
- azx_dev->irq_ignore = 0;
- continue;
- }
/* check whether this IRQ is really acceptable */
- if (azx_position_ok(chip, azx_dev)) {
+ ok = azx_position_ok(chip, azx_dev);
+ if (ok == 1) {
azx_dev->irq_pending = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(azx_dev->substream);
spin_lock(&chip->reg_lock);
- } else if (chip->bus && chip->bus->workq) {
+ } else if (ok == 0 && chip->bus && chip->bus->workq) {
/* bogus IRQ, process it later */
azx_dev->irq_pending = 1;
queue_work(chip->bus->workq,
bdl = (u32 *)azx_dev->bdl.area;
ofs = 0;
azx_dev->frags = 0;
- azx_dev->irq_ignore = 0;
pos_adj = bdl_pos_adj[chip->dev_index];
if (pos_adj > 0) {
struct snd_pcm_runtime *runtime = substream->runtime;
&bdl, ofs, pos_adj, 1);
if (ofs < 0)
goto error;
- azx_dev->irq_ignore = 1;
}
} else
pos_adj = 0;
while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
--timeout)
;
+
+ /* reset first position - may not be synced with hw at this time */
+ *azx_dev->posbuf = 0;
}
/*
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
- azx_stream_reset(chip, azx_dev);
return 0;
}
unsigned int bufsize, period_bytes, format_val;
int err;
+ azx_stream_reset(chip, azx_dev);
format_val = snd_hda_calc_stream_format(runtime->rate,
runtime->channels,
runtime->format,
return err;
}
+ azx_dev->min_jiffies = (runtime->period_size * HZ) /
+ (runtime->rate * 2);
azx_setup_controller(chip, azx_dev);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev;
struct snd_pcm_substream *s;
- int start, nsync = 0, sbits = 0;
+ int rstart = 0, start, nsync = 0, sbits = 0;
int nwait, timeout;
switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ rstart = 1;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_START:
start = 1;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
+ if (rstart) {
+ azx_dev->start_flag = 1;
+ azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies;
+ }
if (start)
azx_stream_start(chip, azx_dev);
else
{
unsigned int pos;
+ if (azx_dev->start_flag &&
+ time_before_eq(jiffies, azx_dev->start_jiffies))
+ return -1; /* bogus (too early) interrupt */
+ azx_dev->start_flag = 0;
+
pos = azx_get_position(chip, azx_dev);
if (chip->position_fix == POS_FIX_AUTO) {
if (!pos) {
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
/* forced codec slots */
+ SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
{}
};
gcap &= ~0x01;
/* allow 64bit DMA address if supported by H/W */
- if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
- pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+ if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
- pci_set_dma_mask(pci, DMA_32BIT_MASK);
- pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+ pci_set_dma_mask(pci, DMA_BIT_MASK(32));
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
/* read number of streams from GCAP register instead of using
{ } /* end */
};
+static struct hda_verb ad1884a_mobile_verbs[] = {
+ /* DACs; unmute as default */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ /* Port-A (HP) mixer - route only from analog mixer */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-A pin */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-A (HP) pin - always unmuted */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Port-B (mic jack) pin */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-C (int mic) pin */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-F (int speaker) mixer - route only from analog mixer */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-F pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Analog mixer; mute as default */
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+ /* Analog Mix output amp */
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* capture sources */
+ /* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* unsolicited event for pin-sense */
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ { } /* end */
+};
+
/*
* Thinkpad X300
* 0x11 - HP
spec->input_mux = &ad1884a_laptop_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
+ /* set the upper-limit for mixer amp to 0dB for avoiding the
+ * possible damage by overloading
+ */
+ snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+ (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+ (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+ (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+ (1 << AC_AMPCAP_MUTE_SHIFT));
break;
case AD1884A_MOBILE:
spec->mixers[0] = ad1884a_mobile_mixers;
- spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
+ spec->init_verbs[0] = ad1884a_mobile_verbs;
spec->multiout.dig_out_nid = 0;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
}
#ifdef CONFIG_SND_JACK
+static void conexant_free_jack_priv(struct snd_jack *jack)
+{
+ struct conexant_jack *jacks = jack->private_data;
+ jacks->nid = 0;
+ jacks->jack = NULL;
+}
+
static int conexant_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
struct conexant_spec *spec;
struct conexant_jack *jack;
const char *name;
+ int err;
spec = codec->spec;
snd_array_init(&spec->jacks, sizeof(*jack), 32);
jack->nid = nid;
jack->type = type;
- return snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ if (err < 0)
+ return err;
+ jack->jack->private_data = jack;
+ jack->jack->private_free = conexant_free_jack_priv;
+ return 0;
}
static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid)
if (spec->jacks.list) {
struct conexant_jack *jacks = spec->jacks.list;
int i;
- for (i = 0; i < spec->jacks.used; i++)
- snd_device_free(codec->bus->card, &jacks[i].jack);
+ for (i = 0; i < spec->jacks.used; i++, jacks++) {
+ if (jacks->jack)
+ snd_device_free(codec->bus->card, jacks->jack);
+ }
snd_array_free(&spec->jacks);
}
#endif
static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736),
+ SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5051_LAPTOP),
SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
ALC663_ASUS_MODE4,
ALC663_ASUS_MODE5,
ALC663_ASUS_MODE6,
+ ALC272_DELL,
+ ALC272_DELL_ZM1,
ALC662_AUTO,
ALC662_MODEL_LAST,
};
pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
if (pincap & AC_PINCAP_VREF_80)
val = PIN_VREF80;
+ else if (pincap & AC_PINCAP_VREF_50)
+ val = PIN_VREF50;
+ else if (pincap & AC_PINCAP_VREF_100)
+ val = PIN_VREF100;
+ else if (pincap & AC_PINCAP_VREF_GRD)
+ val = PIN_VREFGRD;
}
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, val);
}
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
- SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
+ SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
ALC883_FUJITSU_PI2515),
- SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
- SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+ SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx",
ALC888_FUJITSU_XA3530),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA),
+ SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703),
SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
ALC269_ASUS_EEEPC_P901),
+ SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
{}
0x02, 0x03, 0x04
};
+static hda_nid_t alc272_dac_nids[2] = {
+ 0x02, 0x03
+};
+
static hda_nid_t alc662_adc_nids[1] = {
/* ADC1-2 */
0x09,
};
+static hda_nid_t alc272_adc_nids[1] = {
+ /* ADC1-2 */
+ 0x08,
+};
+
static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
+
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* always trun on EAPD */
{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
{}
};
+static struct hda_verb alc272_dell_zm1_init_verbs[] = {
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
+static struct hda_verb alc272_dell_init_verbs[] = {
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
static struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
{ } /* end */
};
+static struct snd_kcontrol_new alc272_auto_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
{
unsigned int present;
static struct snd_pci_quirk alc662_cfg_tbl[] = {
SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
+ SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL),
+ SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA),
+ SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
/*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
/*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
ALC662_3ST_6ch_DIG),
.unsol_event = alc663_mode6_unsol_event,
.init_hook = alc663_mode6_inithook,
},
+ [ALC272_DELL] = {
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc272_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs, alc272_dell_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc272_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .adc_nids = alc272_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
+ .capsrc_nids = alc272_capsrc_nids,
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc663_m51va_capture_source,
+ .unsol_event = alc663_m51va_unsol_event,
+ .init_hook = alc663_m51va_inithook,
+ },
+ [ALC272_DELL_ZM1] = {
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc272_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .adc_nids = alc662_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .capsrc_nids = alc662_capsrc_nids,
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc663_m51va_capture_source,
+ .unsol_event = alc663_m51va_unsol_event,
+ .init_hook = alc663_m51va_inithook,
+ },
};
STAC_D965_REF,
STAC_D965_3ST,
STAC_D965_5ST,
+ STAC_D965_5ST_NO_FP,
STAC_DELL_3ST,
STAC_DELL_BIOS,
STAC_927X_MODELS
0x40000100, 0x40000100
};
+static unsigned int d965_5st_no_fp_pin_configs[14] = {
+ 0x40000100, 0x40000100, 0x0181304e, 0x01014010,
+ 0x01a19040, 0x01011012, 0x01016011, 0x40000100,
+ 0x40000100, 0x40000100, 0x40000100, 0x01442070,
+ 0x40000100, 0x40000100
+};
+
static unsigned int dell_3st_pin_configs[14] = {
0x02211230, 0x02a11220, 0x01a19040, 0x01114210,
0x01111212, 0x01116211, 0x01813050, 0x01112214,
[STAC_D965_REF] = ref927x_pin_configs,
[STAC_D965_3ST] = d965_3st_pin_configs,
[STAC_D965_5ST] = d965_5st_pin_configs,
+ [STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs,
[STAC_DELL_3ST] = dell_3st_pin_configs,
[STAC_DELL_BIOS] = NULL,
};
[STAC_D965_REF] = "ref",
[STAC_D965_3ST] = "3stack",
[STAC_D965_5ST] = "5stack",
+ [STAC_D965_5ST_NO_FP] = "5stack-no-fp",
[STAC_DELL_3ST] = "dell-3stack",
[STAC_DELL_BIOS] = "dell-bios",
};
unsigned int wid_caps;
for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
+ if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
+ wid_caps = get_wcaps(codec, pins[i]);
+ if (wid_caps & AC_WCAP_UNSOL_CAP)
+ spec->hp_detect = 1;
+ }
nid = dac_nids[i];
if (!nid)
continue;
err = create_controls_idx(codec, name, idx, nid, 3);
if (err < 0)
return err;
- if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
- wid_caps = get_wcaps(codec, pins[i]);
- if (wid_caps & AC_WCAP_UNSOL_CAP)
- spec->hp_detect = 1;
- }
}
}
return 0;
AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
}
+#ifdef CONFIG_SND_JACK
+static void stac92xx_free_jack_priv(struct snd_jack *jack)
+{
+ struct sigmatel_jack *jacks = jack->private_data;
+ jacks->nid = 0;
+ jacks->jack = NULL;
+}
+#endif
+
static int stac92xx_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
int def_conf = snd_hda_codec_get_pincfg(codec, nid);
int connectivity = get_defcfg_connect(def_conf);
char name[32];
+ int err;
if (connectivity && connectivity != AC_JACK_PORT_FIXED)
return 0;
snd_hda_get_jack_connectivity(def_conf),
snd_hda_get_jack_location(def_conf));
- return snd_jack_new(codec->bus->card, name, type, &jack->jack);
-#else
- return 0;
+ err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ if (err < 0) {
+ jack->nid = 0;
+ return err;
+ }
+ jack->jack->private_data = jack;
+ jack->jack->private_free = stac92xx_free_jack_priv;
#endif
+ return 0;
}
static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
pinctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* if PINCTL already set then skip */
- if (!(pinctl & AC_PINCTL_IN_EN)) {
+ /* Also, if both INPUT and OUTPUT are set,
+ * it must be a BIOS bug; need to override, too
+ */
+ if (!(pinctl & AC_PINCTL_IN_EN) ||
+ (pinctl & AC_PINCTL_OUT_EN)) {
+ pinctl &= ~AC_PINCTL_OUT_EN;
pinctl |= AC_PINCTL_IN_EN;
stac92xx_auto_set_pinctl(codec, nid,
pinctl);
if (!codec->bus->shutdown && spec->jacks.list) {
struct sigmatel_jack *jacks = spec->jacks.list;
int i;
- for (i = 0; i < spec->jacks.used; i++)
- snd_device_free(codec->bus->card, &jacks[i].jack);
+ for (i = 0; i < spec->jacks.used; i++, jacks++) {
+ if (jacks->jack)
+ snd_device_free(codec->bus->card, jacks->jack);
+ }
}
snd_array_free(&spec->jacks);
#endif
unsigned int fragsize1;
unsigned int position;
unsigned int pos_shift;
+ unsigned int last_pos;
+ unsigned long last_pos_jiffies;
+ unsigned int jiffy_to_bytes;
int frags;
int lvi;
int lvi_frag;
ichdev->suspended = 0;
/* fallthru */
case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
val = ICH_IOCE | ICH_STARTBM;
+ ichdev->last_pos = ichdev->position;
+ ichdev->last_pos_jiffies = jiffies;
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
ichdev->suspended = 1;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
val = ICH_IOCE;
break;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- val = ICH_IOCE | ICH_STARTBM;
- break;
default:
return -EINVAL;
}
ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
}
snd_intel8x0_setup_periods(chip, ichdev);
+ ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
return 0;
}
struct intel8x0 *chip = snd_pcm_substream_chip(substream);
struct ichdev *ichdev = get_ichdev(substream);
size_t ptr1, ptr;
- int civ, timeout = 100;
+ int civ, timeout = 10;
unsigned int position;
spin_lock(&chip->reg_lock);
ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
break;
} while (timeout--);
- ptr1 <<= ichdev->pos_shift;
- ptr = ichdev->fragsize1 - ptr1;
- ptr += position;
+ if (ptr1 != 0) {
+ ptr1 <<= ichdev->pos_shift;
+ ptr = ichdev->fragsize1 - ptr1;
+ ptr += position;
+ ichdev->last_pos = ptr;
+ ichdev->last_pos_jiffies = jiffies;
+ } else {
+ ptr1 = jiffies - ichdev->last_pos_jiffies;
+ if (ptr1)
+ ptr1 -= 1;
+ ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
+ ptr %= ichdev->size;
+ }
spin_unlock(&chip->reg_lock);
if (ptr >= ichdev->size)
return 0;
.name = "Dell Unknown", /* STAC9750/51 */
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x1028,
+ .subdevice = 0x016a,
+ .name = "Dell Inspiron 8600", /* STAC9750/51 */
+ .type = AC97_TUNE_HP_ONLY
+ },
{
.subvendor = 0x1028,
.subdevice = 0x0186,
.name = "HP nc6000",
.type = AC97_TUNE_MUTE_LED
},
- {
- .subvendor = 0x103c,
- .subdevice = 0x0934,
- .name = "HP nx8220",
- .type = AC97_TUNE_MUTE_LED
- },
{
.subvendor = 0x103c,
.subdevice = 0x129d,
struct snd_pcm_substream *subs;
struct ichdev *ichdev;
unsigned long port;
- unsigned long pos, t;
- struct timeval start_time, stop_time;
+ unsigned long pos, pos1, t;
+ int civ, timeout = 1000, attempt = 1;
+ struct timespec start_time, stop_time;
if (chip->ac97_bus->clock != 48000)
return; /* specified in module option */
+ __again:
subs = chip->pcm[0]->streams[0].substream;
if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
}
ichdev = &chip->ichd[ICHD_PCMOUT];
ichdev->physbuf = subs->dma_buffer.addr;
- ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE;
+ ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE;
ichdev->substream = NULL; /* don't process interrupts */
/* set rate */
iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE);
iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot);
}
- do_gettimeofday(&start_time);
+ do_posix_clock_monotonic_gettime(&start_time);
spin_unlock_irq(&chip->reg_lock);
msleep(50);
spin_lock_irq(&chip->reg_lock);
/* check the position */
- pos = ichdev->fragsize1;
- pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift;
- pos += ichdev->position;
+ do {
+ civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV);
+ pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb);
+ if (pos1 == 0) {
+ udelay(10);
+ continue;
+ }
+ if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
+ pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+ break;
+ } while (timeout--);
+ if (pos1 == 0) { /* oops, this value is not reliable */
+ pos = 0;
+ } else {
+ pos = ichdev->fragsize1;
+ pos -= pos1 << ichdev->pos_shift;
+ pos += ichdev->position;
+ }
chip->in_measurement = 0;
- do_gettimeofday(&stop_time);
+ do_posix_clock_monotonic_gettime(&stop_time);
/* stop */
if (chip->device_type == DEVICE_ALI) {
iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16));
iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
spin_unlock_irq(&chip->reg_lock);
+ if (pos == 0) {
+ snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+ __retry:
+ if (attempt < 3) {
+ msleep(300);
+ attempt++;
+ goto __again;
+ }
+ goto __end;
+ }
+
+ pos /= 4;
t = stop_time.tv_sec - start_time.tv_sec;
t *= 1000000;
- t += stop_time.tv_usec - start_time.tv_usec;
- printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t);
+ t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
+ printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
if (t == 0) {
- snd_printk(KERN_ERR "?? calculation error..\n");
- return;
+ snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
+ goto __retry;
}
- pos = (pos / 4) * 1000;
+ pos *= 1000;
pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
- if (pos < 40000 || pos >= 60000)
+ if (pos < 40000 || pos >= 60000) {
/* abnormal value. hw problem? */
printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
+ goto __retry;
+ } else if (pos > 40500 && pos < 41500)
+ /* first exception - 41000Hz reference clock */
+ chip->ac97_bus->clock = 41000;
+ else if (pos > 43600 && pos < 44600)
+ /* second exception - 44100HZ reference clock */
+ chip->ac97_bus->clock = 44100;
else if (pos < 47500 || pos > 48500)
/* not 48000Hz, tuning the clock.. */
chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
+ __end:
printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
}
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
spin_lock_irqsave(&cif->lock, irqflags);
while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport))
udelay(10);
- if (i >= CMDIF_TIMEOUT) {
+ if (i > CMDIF_TIMEOUT) {
err = -EBUSY;
goto errout;
}
WRITE_PORT_ULONG(cmdport->data1, cmd); /* write cmd */
if ((flags & RESP) && ret) {
while (!IS_DATF(cmdport) &&
- time++ < CMDIF_TIMEOUT)
+ time < CMDIF_TIMEOUT) {
udelay(10);
+ time++;
+ }
if (time < CMDIF_TIMEOUT) { /* read response */
ret->retlongs[0] =
READ_PORT_ULONG(cmdport->data1);
SEND_GPOS(cif, 0, data->id, &rptr);
udelay(1);
} while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY);
- if (j >= MAX_WRITE_RETRY)
+ if (j > MAX_WRITE_RETRY)
snd_printk(KERN_ERR "Riptide: Could not stop stream!");
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
SEND_SACR(cif, val, reg);
SEND_RACR(cif, reg, &rptr);
} while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY);
- if (i == MAX_WRITE_RETRY)
+ if (i > MAX_WRITE_RETRY)
snd_printdd("Write AC97 reg failed\n");
}
return change;
}
-static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -9450, 150, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -4650, 150, 1);
static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata = {
.name = "PCM Playback Volume",
static struct snd_pcm_hardware pdacf_pcm_capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
static struct pmac_keywest *keywest_ctx;
-static int keywest_attach_adapter(struct i2c_adapter *adapter);
-static int keywest_detach_client(struct i2c_client *client);
-
-struct i2c_driver keywest_driver = {
- .driver = {
- .name = "PMac Keywest Audio",
- },
- .attach_adapter = &keywest_attach_adapter,
- .detach_client = &keywest_detach_client,
-};
-
-
#ifndef i2c_device_name
#define i2c_device_name(x) ((x)->name)
#endif
+static int keywest_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ i2c_set_clientdata(client, keywest_ctx);
+ return 0;
+}
+
+/*
+ * This is kind of a hack, best would be to turn powermac to fixed i2c
+ * bus numbers and declare the sound device as part of platform
+ * initialization
+ */
static int keywest_attach_adapter(struct i2c_adapter *adapter)
{
- int err;
- struct i2c_client *new_client;
+ struct i2c_board_info info;
if (! keywest_ctx)
return -EINVAL;
if (strncmp(i2c_device_name(adapter), "mac-io", 6))
return 0; /* ignored */
- new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (! new_client)
- return -ENOMEM;
-
- new_client->addr = keywest_ctx->addr;
- i2c_set_clientdata(new_client, keywest_ctx);
- new_client->adapter = adapter;
- new_client->driver = &keywest_driver;
- new_client->flags = 0;
-
- strcpy(i2c_device_name(new_client), keywest_ctx->name);
- keywest_ctx->client = new_client;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "keywest", I2C_NAME_SIZE);
+ info.addr = keywest_ctx->addr;
+ keywest_ctx->client = i2c_new_device(adapter, &info);
- /* Tell the i2c layer a new client has arrived */
- if (i2c_attach_client(new_client)) {
- snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n");
- err = -ENODEV;
- goto __err;
- }
-
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&keywest_ctx->client->detected,
+ &keywest_ctx->client->driver->clients);
return 0;
-
- __err:
- kfree(new_client);
- keywest_ctx->client = NULL;
- return err;
}
-static int keywest_detach_client(struct i2c_client *client)
+static int keywest_remove(struct i2c_client *client)
{
+ i2c_set_clientdata(client, NULL);
if (! keywest_ctx)
return 0;
if (client == keywest_ctx->client)
keywest_ctx->client = NULL;
- i2c_detach_client(client);
- kfree(client);
return 0;
}
+
+static const struct i2c_device_id keywest_i2c_id[] = {
+ { "keywest", 0 },
+ { }
+};
+
+struct i2c_driver keywest_driver = {
+ .driver = {
+ .name = "PMac Keywest Audio",
+ },
+ .attach_adapter = keywest_attach_adapter,
+ .probe = keywest_probe,
+ .remove = keywest_remove,
+ .id_table = keywest_i2c_id,
+};
+
/* exported */
void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
{
/* PCM hardware DMA capabilities - platform specific */
static const struct snd_pcm_hardware au1xpsc_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
.formats = AU1XPSC_PCM_FMTS,
.period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES,
.period_bytes_max = 4096 * 1024 - 1,
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
-obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
*/
static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
+/*
+ * Gain control for earpiece amplifier
+ * 0 dB to 12 dB in 6 dB steps (mute instead of -6)
+ */
+static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1);
+
/*
* Capture gain after the ADCs
* from 0 dB to 31 dB in 1 dB steps
4, 3, 0, output_tvl),
SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
- TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
+ TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl),
/* Common capture gain controls */
SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
* required for LRC in master mode. The DACs or ADCs need a
* valid audio path i.e. pin -> ADC or DAC -> pin before
* the LRC will be enabled in master mode. */
- if (!master && cmd != SNDRV_PCM_TRIGGER_START)
+ if (!master || cmd != SNDRV_PCM_TRIGGER_START)
return 0;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int reg = kcontrol->private_value & 0xff;
- int reg2 = (kcontrol->private_value >> 24) & 0xff;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
int ret;
u16 val;
return 0;
}
-#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
+#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
+ xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_2r, \
.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
- .private_value = (reg_left) | ((shift) << 8) | \
- ((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .max = xmax, .invert = xinvert} }
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
reg = wm8580_read(codec, WM8580_PLLA4 + offset);
reg &= ~0x3f;
reg |= pll_div.prescale | pll_div.postscale << 1 |
- pll_div.freqmode << 4;
+ pll_div.freqmode << 3;
wm8580_write(codec, WM8580_PLLA4 + offset, reg);
inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* AINLMUX */
-SND_SOC_DAPM_MUX_E("AILNMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINLMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
&wm8990_dapm_ainlmux_controls, inmixer_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* AINRMUX */
-SND_SOC_DAPM_MUX_E("AIRNMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINRMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
&wm8990_dapm_ainrmux_controls, inmixer_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
{"LIN12 PGA", "LIN2 Switch", "LIN2"},
/* LIN34 PGA */
{"LIN34 PGA", "LIN3 Switch", "LIN3"},
- {"LIN34 PGA", "LIN4 Switch", "LIN4"},
+ {"LIN34 PGA", "LIN4 Switch", "LIN4/RXN"},
/* INMIXL */
{"INMIXL", "Record Left Volume", "LOMIX"},
{"INMIXL", "LIN2 Volume", "LIN2"},
{"INMIXL", "LINPGA12 Switch", "LIN12 PGA"},
{"INMIXL", "LINPGA34 Switch", "LIN34 PGA"},
- /* AILNMUX */
- {"AILNMUX", "INMIXL Mix", "INMIXL"},
- {"AILNMUX", "DIFFINL Mix", "LIN12PGA"},
- {"AILNMUX", "DIFFINL Mix", "LIN34PGA"},
- {"AILNMUX", "RXVOICE Mix", "LIN4/RXN"},
- {"AILNMUX", "RXVOICE Mix", "RIN4/RXP"},
+ /* AINLMUX */
+ {"AINLMUX", "INMIXL Mix", "INMIXL"},
+ {"AINLMUX", "DIFFINL Mix", "LIN12 PGA"},
+ {"AINLMUX", "DIFFINL Mix", "LIN34 PGA"},
+ {"AINLMUX", "RXVOICE Mix", "LIN4/RXN"},
+ {"AINLMUX", "RXVOICE Mix", "RIN4/RXP"},
/* ADC */
- {"Left ADC", NULL, "AILNMUX"},
+ {"Left ADC", NULL, "AINLMUX"},
/* RIN12 PGA */
{"RIN12 PGA", "RIN1 Switch", "RIN1"},
{"RIN12 PGA", "RIN2 Switch", "RIN2"},
/* RIN34 PGA */
{"RIN34 PGA", "RIN3 Switch", "RIN3"},
- {"RIN34 PGA", "RIN4 Switch", "RIN4"},
+ {"RIN34 PGA", "RIN4 Switch", "RIN4/RXP"},
/* INMIXL */
{"INMIXR", "Record Right Volume", "ROMIX"},
{"INMIXR", "RIN2 Volume", "RIN2"},
{"INMIXR", "RINPGA12 Switch", "RIN12 PGA"},
{"INMIXR", "RINPGA34 Switch", "RIN34 PGA"},
- /* AIRNMUX */
- {"AIRNMUX", "INMIXR Mix", "INMIXR"},
- {"AIRNMUX", "DIFFINR Mix", "RIN12PGA"},
- {"AIRNMUX", "DIFFINR Mix", "RIN34PGA"},
- {"AIRNMUX", "RXVOICE Mix", "RIN4/RXN"},
- {"AIRNMUX", "RXVOICE Mix", "RIN4/RXP"},
+ /* AINRMUX */
+ {"AINRMUX", "INMIXR Mix", "INMIXR"},
+ {"AINRMUX", "DIFFINR Mix", "RIN12 PGA"},
+ {"AINRMUX", "DIFFINR Mix", "RIN34 PGA"},
+ {"AINRMUX", "RXVOICE Mix", "LIN4/RXN"},
+ {"AINRMUX", "RXVOICE Mix", "RIN4/RXP"},
/* ADC */
- {"Right ADC", NULL, "AIRNMUX"},
+ {"Right ADC", NULL, "AINRMUX"},
/* LOMIX */
{"LOMIX", "LOMIX RIN3 Bypass Switch", "RIN3"},
{"LOPMIX", "LOPMIX Left Mixer PGA Switch", "LOPGA"},
/* OUT3MIX */
- {"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXP"},
+ {"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXN"},
{"OUT3MIX", "OUT3MIX Left Out PGA Switch", "LOPGA"},
/* OUT4MIX */
/* Output Pins */
{"LON", NULL, "LONMIX"},
{"LOP", NULL, "LOPMIX"},
- {"OUT", NULL, "OUT3MIX"},
+ {"OUT3", NULL, "OUT3MIX"},
{"LOUT", NULL, "LOUT PGA"},
{"SPKN", NULL, "SPKMIX"},
{"ROUT", NULL, "ROUT PGA"},
}
#ifdef CONFIG_PM
-static int wm9705_soc_suspend(struct platform_device *pdev)
+static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
tristate
config SND_DAVINCI_SOC_EVM
- tristate "SoC Audio support for DaVinci EVM"
- depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM
+ tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+ depends on SND_DAVINCI_SOC
+ depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
select SND_DAVINCI_SOC_I2S
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on TI
- DaVinci EVM platform.
+ DaVinci DM6446 or DM355 EVM platforms.
config SND_DAVINCI_SOC_SFFSDR
tristate "SoC Audio support for SFFSDR"
#include <sound/soc-dapm.h>
#include <asm/dma.h>
-#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/asp.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
#include "../codecs/tlv320aic3x.h"
#include "davinci-pcm.h"
/* evm audio private data */
static struct aic3x_setup_data evm_aic3x_setup = {
- .i2c_bus = 0,
+ .i2c_bus = 1,
.i2c_address = 0x1b,
};
.codec_data = &evm_aic3x_setup,
};
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
static struct resource evm_snd_resources[] = {
{
- .start = DAVINCI_MCBSP_BASE,
- .end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+ .start = DAVINCI_ASP0_BASE,
+ .end = DAVINCI_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct evm_snd_platform_data evm_snd_data = {
- .tx_dma_ch = DM644X_DMACH_MCBSP_TX,
- .rx_dma_ch = DM644X_DMACH_MCBSP_RX,
+ .tx_dma_ch = DAVINCI_DMA_ASP0_TX,
+ .rx_dma_ch = DAVINCI_DMA_ASP0_RX,
+};
+
+/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+static struct resource dm335evm_snd_resources[] = {
+ {
+ .start = DAVINCI_ASP1_BASE,
+ .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct evm_snd_platform_data dm335evm_snd_data = {
+ .tx_dma_ch = DAVINCI_DMA_ASP1_TX,
+ .rx_dma_ch = DAVINCI_DMA_ASP1_RX,
};
static struct platform_device *evm_snd_device;
static int __init evm_init(void)
{
+ struct resource *resources;
+ unsigned num_resources;
+ struct evm_snd_platform_data *data;
+ int index;
int ret;
- evm_snd_device = platform_device_alloc("soc-audio", 0);
+ if (machine_is_davinci_evm()) {
+ davinci_cfg_reg(DM644X_MCBSP);
+
+ resources = evm_snd_resources;
+ num_resources = ARRAY_SIZE(evm_snd_resources);
+ data = &evm_snd_data;
+ index = 0;
+ } else if (machine_is_davinci_dm355_evm()) {
+ /* we don't use ASP1 IRQs, or we'd need to mux them ... */
+ davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+ davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+ resources = dm335evm_snd_resources;
+ num_resources = ARRAY_SIZE(dm335evm_snd_resources);
+ data = &dm335evm_snd_data;
+ index = 1;
+ } else
+ return -EINVAL;
+
+ evm_snd_device = platform_device_alloc("soc-audio", index);
if (!evm_snd_device)
return -ENOMEM;
platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
evm_snd_devdata.dev = &evm_snd_device->dev;
- platform_device_add_data(evm_snd_device, &evm_snd_data,
- sizeof(evm_snd_data));
+ platform_device_add_data(evm_snd_device, data, sizeof(*data));
- ret = platform_device_add_resources(evm_snd_device, evm_snd_resources,
- ARRAY_SIZE(evm_snd_resources));
+ ret = platform_device_add_resources(evm_snd_device, resources,
+ num_resources);
if (ret) {
platform_device_put(evm_snd_device);
return ret;
#include "davinci-pcm.h"
+
+/*
+ * NOTE: terminology here is confusing.
+ *
+ * - This driver supports the "Audio Serial Port" (ASP),
+ * found on dm6446, dm355, and other DaVinci chips.
+ *
+ * - But it labels it a "Multi-channel Buffered Serial Port"
+ * (McBSP) as on older chips like the dm642 ... which was
+ * backward-compatible, possibly explaining that confusion.
+ *
+ * - OMAP chips have a controller called McBSP, which is
+ * incompatible with the DaVinci flavor of McBSP.
+ *
+ * - Newer DaVinci chips have a controller called McASP,
+ * incompatible with ASP and with either McBSP.
+ *
+ * In short: this uses ASP to implement I2S, not McBSP.
+ * And it won't be the only DaVinci implemention of I2S.
+ */
#define DAVINCI_MCBSP_DRR_REG 0x00
#define DAVINCI_MCBSP_DXR_REG 0x04
#define DAVINCI_MCBSP_SPCR_REG 0x08
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
struct davinci_mcbsp_dev *dev;
struct resource *mem, *ioarea;
struct evm_snd_platform_data *pdata;
cpu_dai->private_data = dev;
- dev->clk = clk_get(&pdev->dev, "McBSPCLK");
+ dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
ret = -ENODEV;
goto err_free_mem;
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
struct resource *mem;
#include <sound/soc.h>
#include <asm/dma.h>
+#include <mach/edma.h>
#include "davinci-pcm.h"
spinlock_t lock;
int period; /* current DMA period */
int master_lch; /* Master DMA channel */
- int slave_lch; /* Slave DMA channel */
+ int slave_lch; /* linked parameter RAM reload slot */
struct davinci_pcm_dma_params *params; /* DMA params */
};
dst_bidx = data_type;
}
- davinci_set_dma_src_params(lch, src, INCR, W8BIT);
- davinci_set_dma_dest_params(lch, dst, INCR, W8BIT);
- davinci_set_dma_src_index(lch, src_bidx, 0);
- davinci_set_dma_dest_index(lch, dst_bidx, 0);
- davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+ edma_set_src(lch, src, INCR, W8BIT);
+ edma_set_dest(lch, dst, INCR, W8BIT);
+ edma_set_src_index(lch, src_bidx, 0);
+ edma_set_dest_index(lch, dst_bidx, 0);
+ edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
prtd->period++;
if (unlikely(prtd->period >= runtime->periods))
prtd->period = 0;
}
-static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
{
struct snd_pcm_substream *substream = data;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
- int tcc = TCC_ANY;
+ struct edmacc_param p_ram;
int ret;
if (!dma_data)
prtd->params = dma_data;
/* Request master DMA channel */
- ret = davinci_request_dma(prtd->params->channel, prtd->params->name,
+ ret = edma_alloc_channel(prtd->params->channel,
davinci_pcm_dma_irq, substream,
- &prtd->master_lch, &tcc, EVENTQ_0);
- if (ret)
+ EVENTQ_0);
+ if (ret < 0)
return ret;
+ prtd->master_lch = ret;
- /* Request slave DMA channel */
- ret = davinci_request_dma(PARAM_ANY, "Link",
- NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0);
- if (ret) {
- davinci_free_dma(prtd->master_lch);
+ /* Request parameter RAM reload slot */
+ ret = edma_alloc_slot(EDMA_SLOT_ANY);
+ if (ret < 0) {
+ edma_free_channel(prtd->master_lch);
return ret;
}
-
- /* Link slave DMA channel in loopback */
- davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch);
+ prtd->slave_lch = ret;
+
+ /* Issue transfer completion IRQ when the channel completes a
+ * transfer, then always reload from the same slot (by a kind
+ * of loopback link). The completion IRQ handler will update
+ * the reload slot with a new buffer.
+ *
+ * REVISIT save p_ram here after setting up everything except
+ * the buffer and its length (ccnt) ... use it as a template
+ * so davinci_pcm_enqueue_dma() takes less time in IRQ.
+ */
+ edma_read_slot(prtd->slave_lch, &p_ram);
+ p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
+ p_ram.link_bcntrld = prtd->slave_lch << 5;
+ edma_write_slot(prtd->slave_lch, &p_ram);
return 0;
}
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- davinci_start_dma(prtd->master_lch);
+ edma_start(prtd->master_lch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- davinci_stop_dma(prtd->master_lch);
+ edma_stop(prtd->master_lch);
break;
default:
ret = -EINVAL;
static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
{
struct davinci_runtime_data *prtd = substream->runtime->private_data;
- struct paramentry_descriptor temp;
+ struct edmacc_param temp;
prtd->period = 0;
davinci_pcm_enqueue_dma(substream);
- /* Get slave channel dma params for master channel startup */
- davinci_get_dma_params(prtd->slave_lch, &temp);
- davinci_set_dma_params(prtd->master_lch, &temp);
+ /* Copy self-linked parameter RAM entry into master channel */
+ edma_read_slot(prtd->slave_lch, &temp);
+ edma_write_slot(prtd->master_lch, &temp);
return 0;
}
spin_lock(&prtd->lock);
- davinci_dma_getposition(prtd->master_lch, &src, &dst);
+ edma_get_position(prtd->master_lch, &src, &dst);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
count = src - runtime->dma_addr;
else
struct snd_pcm_runtime *runtime = substream->runtime;
struct davinci_runtime_data *prtd = runtime->private_data;
- davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch);
+ edma_unlink(prtd->slave_lch);
- davinci_free_dma(prtd->slave_lch);
- davinci_free_dma(prtd->master_lch);
+ edma_free_slot(prtd->slave_lch);
+ edma_free_channel(prtd->master_lch);
kfree(prtd);
static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
.rate_min = 8000,
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
module_init(n810_soc_init);
module_exit(n810_soc_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("ALSA SoC Nokia N810");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
break;
case SND_SOC_DAIFMT_DSP_B:
regs->srgr2 |= FPER(wlen * channels - 1);
- regs->srgr1 |= FWID(wlen * channels - 2);
+ regs->srgr1 |= FWID(0);
break;
}
{
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
+ unsigned int temp_fmt = fmt;
if (mcbsp_data->configured)
return 0;
/* 0-bit data delay */
regs->rcr2 |= RDATDLY(0);
regs->xcr2 |= XDATDLY(0);
+ /* Invert FS polarity configuration */
+ temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
break;
default:
/* Unsupported data format */
}
/* Set bit clock (CLKX/CLKR) and FS polarities */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/*
* Normal BCLK + FS.
}
module_exit(snd_omap_mcbsp_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
}
module_exit(omap_soc_platform_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Set codec DAI configuration */
err = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
printk(KERN_ERR "can't set codec DAI configuration\n");
/* Set cpu DAI configuration */
err = snd_soc_dai_set_fmt(cpu_dai,
SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
printk(KERN_ERR "can't set cpu DAI configuration\n");
#include <sound/soc.h>
#include <sound/soc-dapm.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/magician.h>
#include <asm/mach-types.h>
#include "../codecs/uda1380.h"
static struct platform_device *palm27x_snd_device;
-static int __init palm27x_asoc_init(void)
+static int palm27x_asoc_probe(struct platform_device *pdev)
{
int ret;
machine_is_palmld()))
return -ENODEV;
+ if (pdev->dev.platform_data)
+ palm27x_ep_gpio = ((struct palm27x_asoc_info *)
+ (pdev->dev.platform_data))->jack_gpio;
+
ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
if (ret)
return ret;
return ret;
}
-static void __exit palm27x_asoc_exit(void)
+static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
{
free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
gpio_free(palm27x_ep_gpio);
platform_device_unregister(palm27x_snd_device);
+ return 0;
}
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data)
+static struct platform_driver palm27x_wm9712_driver = {
+ .probe = palm27x_asoc_probe,
+ .remove = __devexit_p(palm27x_asoc_remove),
+ .driver = {
+ .name = "palm27x-asoc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init palm27x_asoc_init(void)
+{
+ return platform_driver_register(&palm27x_wm9712_driver);
+}
+
+static void __exit palm27x_asoc_exit(void)
{
- palm27x_ep_gpio = data->jack_gpio;
+ platform_driver_unregister(&palm27x_wm9712_driver);
}
module_init(palm27x_asoc_init);
* ssp_set_clkdiv - set SSP clock divider
* @div: serial clock rate divider
*/
-static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+static void ssp_set_scr(struct ssp_device *ssp, u32 div)
{
- struct ssp_device *ssp = dev->ssp;
- u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ sscr0 &= ~0x0000ff00;
+ sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+ } else {
+ sscr0 &= ~0x000fff00;
+ sscr0 |= (div - 1) << 8; /* 1..4096 */
+ }
+ ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/**
+ * ssp_get_clkdiv - get SSP clock divider
+ */
+static u32 ssp_get_scr(struct ssp_device *ssp)
+{
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+ u32 div;
- ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ div = ((sscr0 >> 8) & 0xff) * 2 + 2;
+ else
+ div = ((sscr0 >> 8) & 0xfff) + 1;
+ return div;
}
/*
break;
case PXA_SSP_CLK_AUDIO:
priv->sysclk = 0;
- ssp_set_scr(&priv->dev, 1);
+ ssp_set_scr(ssp, 1);
sscr0 |= SSCR0_ACS;
break;
default:
ssp_write_reg(ssp, SSACD, val);
break;
case PXA_SSP_DIV_SCR:
- ssp_set_scr(&priv->dev, div);
+ ssp_set_scr(ssp, div);
break;
default:
return -ENODEV;
case SND_SOC_DAIFMT_I2S:
sspsp = ssp_read_reg(ssp, SSPSP);
- if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
- (width == 16)) {
+ if ((ssp_get_scr(ssp) == 4) && (width == 16)) {
/* This is a special case where the bitclk is 64fs
* and we're not dealing with 2*32 bits of audio
* samples.
goto err_priv;
}
+ priv->dai_fmt = (unsigned int) -1;
dai->private_data = priv;
return 0;
config SND_S3C24XX_SOC
tristate "SoC Audio for the Samsung S3CXXXX chips"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410
help
Say Y or M if you want to add support for codecs attached to
- the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will
- also need to select the audio interfaces to support below.
+ the S3C24XX AC97 or I2S interfaces. You will also need to
+ select the audio interfaces to support below.
config SND_S3C24XX_SOC_I2S
tristate
break;
}
- s3c_i2sv2_calc_rate(&div, NULL, params_rate(params),
- s3c2412_get_iisclk());
+ s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+ s3c2412_get_iisclk());
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
};
/* jive audio machine driver */
-static struct snd_soc_machine snd_soc_machine_jive = {
+static struct snd_soc_card snd_soc_machine_jive = {
.name = "Jive",
+ .platform = &s3c24xx_soc_platform,
.dai_link = &jive_dai,
.num_links = 1,
};
/* jive audio subsystem */
static struct snd_soc_device jive_snd_devdata = {
- .machine = &snd_soc_machine_jive,
- .platform = &s3c24xx_soc_platform,
- .codec_dev = &soc_codec_dev_wm8750_spi,
+ .card = &snd_soc_machine_jive,
+ .codec_dev = &soc_codec_dev_wm8750,
.codec_data = &jive_wm8750_setup,
};
/* default table of all avaialable root fs divisors */
static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
-int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
- unsigned int *fstab,
- unsigned int rate, struct clk *clk)
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+ unsigned int *fstab,
+ unsigned int rate, struct clk *clk)
{
unsigned long clkrate = clk_get_rate(clk);
unsigned int div;
return 0;
}
-EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
int s3c_i2sv2_probe(struct platform_device *pdev,
struct snd_soc_dai *dai,
int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
{
- dai->ops.trigger = s3c2412_i2s_trigger;
- dai->ops.hw_params = s3c2412_i2s_hw_params;
- dai->ops.set_fmt = s3c2412_i2s_set_fmt;
- dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv;
+ struct snd_soc_dai_ops *ops = dai->ops;
+
+ ops->trigger = s3c2412_i2s_trigger;
+ ops->hw_params = s3c2412_i2s_hw_params;
+ ops->set_fmt = s3c2412_i2s_set_fmt;
+ ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
dai->suspend = s3c2412_i2s_suspend;
dai->resume = s3c2412_i2s_resume;
return snd_soc_register_dai(dai);
}
-
EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+
+MODULE_LICENSE("GPL");
#include <plat/regs-s3c2412-iis.h>
-#include <plat/regs-gpio.h>
#include <plat/audio.h>
+#include <mach/regs-gpio.h>
#include <mach/dma.h>
#include "s3c24xx-pcm.h"
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = DMABRG_FMTS,
.rates = DMABRG_RATES,
.rate_min = 8000,
struct snd_soc_platform *platform = card->platform;
struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
+ if (!card->instantiated)
+ return 0;
+
run_delayed_work(&card->delayed_work);
if (platform->remove)
return 0;
}
-static void __init snd_cs4231_init(struct snd_cs4231 *chip)
+static void __devinit snd_cs4231_init(struct snd_cs4231 *chip)
{
unsigned long flags;
return bytes_to_frames(substream->runtime, ptr);
}
-static int __init snd_cs4231_probe(struct snd_cs4231 *chip)
+static int __devinit snd_cs4231_probe(struct snd_cs4231 *chip)
{
unsigned long flags;
int i;
.pointer = snd_cs4231_capture_pointer,
};
-static int __init snd_cs4231_pcm(struct snd_card *card)
+static int __devinit snd_cs4231_pcm(struct snd_card *card)
{
struct snd_cs4231 *chip = card->private_data;
struct snd_pcm *pcm;
return 0;
}
-static int __init snd_cs4231_timer(struct snd_card *card)
+static int __devinit snd_cs4231_timer(struct snd_card *card)
{
struct snd_cs4231 *chip = card->private_data;
struct snd_timer *timer;
.private_value = (left_reg) | ((right_reg) << 8) | ((shift_left) << 16) | \
((shift_right) << 19) | ((mask) << 24) | ((invert) << 22) }
-static struct snd_kcontrol_new snd_cs4231_controls[] __initdata = {
+static struct snd_kcontrol_new snd_cs4231_controls[] __devinitdata = {
CS4231_DOUBLE("PCM Playback Switch", 0, CS4231_LEFT_OUTPUT,
CS4231_RIGHT_OUTPUT, 7, 7, 1, 1),
CS4231_DOUBLE("PCM Playback Volume", 0, CS4231_LEFT_OUTPUT,
CS4231_SINGLE("Headphone Out Switch", 0, CS4231_PIN_CTRL, 7, 1, 1)
};
-static int __init snd_cs4231_mixer(struct snd_card *card)
+static int __devinit snd_cs4231_mixer(struct snd_card *card)
{
struct snd_cs4231 *chip = card->private_data;
int err, idx;
static int dev;
-static int __init cs4231_attach_begin(struct snd_card **rcard)
+static int __devinit cs4231_attach_begin(struct snd_card **rcard)
{
struct snd_card *card;
struct snd_cs4231 *chip;
return 0;
}
-static int __init cs4231_attach_finish(struct snd_card *card)
+static int __devinit cs4231_attach_finish(struct snd_card *card)
{
struct snd_cs4231 *chip = card->private_data;
int err;
.dev_free = snd_cs4231_sbus_dev_free,
};
-static int __init snd_cs4231_sbus_create(struct snd_card *card,
- struct of_device *op,
- int dev)
+static int __devinit snd_cs4231_sbus_create(struct snd_card *card,
+ struct of_device *op,
+ int dev)
{
struct snd_cs4231 *chip = card->private_data;
int err;
.dev_free = snd_cs4231_ebus_dev_free,
};
-static int __init snd_cs4231_ebus_create(struct snd_card *card,
- struct of_device *op,
- int dev)
+static int __devinit snd_cs4231_ebus_create(struct snd_card *card,
+ struct of_device *op,
+ int dev)
{
struct snd_cs4231 *chip = card->private_data;
int err;
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_MU_LAW |
SNDRV_PCM_FMTBIT_A_LAW |
SNDRV_PCM_FMTBIT_U8 |
-snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o
-snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o
+snd-usb-caiaq-y := device.o audio.o midi.o control.o
+snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o
obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
--- /dev/null
+/*
+ * Copyright (c) 2006-2008 Daniel Mack, Karsten Wiese
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "device.h"
+#include "audio.h"
+
+#define N_URBS 32
+#define CLOCK_DRIFT_TOLERANCE 5
+#define FRAMES_PER_URB 8
+#define BYTES_PER_FRAME 512
+#define CHANNELS_PER_STREAM 2
+#define BYTES_PER_SAMPLE 3
+#define BYTES_PER_SAMPLE_USB 4
+#define MAX_BUFFER_SIZE (128*1024)
+#define MAX_ENDPOINT_SIZE 512
+
+#define ENDPOINT_CAPTURE 2
+#define ENDPOINT_PLAYBACK 6
+
+#define MAKE_CHECKBYTE(dev,stream,i) \
+ (stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
+
+static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
+ .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER),
+ .formats = SNDRV_PCM_FMTBIT_S24_3BE,
+ .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_96000),
+ .rate_min = 44100,
+ .rate_max = 0, /* will overwrite later */
+ .channels_min = CHANNELS_PER_STREAM,
+ .channels_max = CHANNELS_PER_STREAM,
+ .buffer_bytes_max = MAX_BUFFER_SIZE,
+ .period_bytes_min = 128,
+ .period_bytes_max = MAX_BUFFER_SIZE,
+ .periods_min = 1,
+ .periods_max = 1024,
+};
+
+static void
+activate_substream(struct snd_usb_caiaqdev *dev,
+ struct snd_pcm_substream *sub)
+{
+ if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dev->sub_playback[sub->number] = sub;
+ else
+ dev->sub_capture[sub->number] = sub;
+}
+
+static void
+deactivate_substream(struct snd_usb_caiaqdev *dev,
+ struct snd_pcm_substream *sub)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dev->spinlock, flags);
+
+ if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dev->sub_playback[sub->number] = NULL;
+ else
+ dev->sub_capture[sub->number] = NULL;
+
+ spin_unlock_irqrestore(&dev->spinlock, flags);
+}
+
+static int
+all_substreams_zero(struct snd_pcm_substream **subs)
+{
+ int i;
+ for (i = 0; i < MAX_STREAMS; i++)
+ if (subs[i] != NULL)
+ return 0;
+ return 1;
+}
+
+static int stream_start(struct snd_usb_caiaqdev *dev)
+{
+ int i, ret;
+
+ debug("%s(%p)\n", __func__, dev);
+
+ if (dev->streaming)
+ return -EINVAL;
+
+ memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
+ memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
+ dev->input_panic = 0;
+ dev->output_panic = 0;
+ dev->first_packet = 1;
+ dev->streaming = 1;
+ dev->warned = 0;
+
+ for (i = 0; i < N_URBS; i++) {
+ ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC);
+ if (ret) {
+ log("unable to trigger read #%d! (ret %d)\n", i, ret);
+ dev->streaming = 0;
+ return -EPIPE;
+ }
+ }
+
+ return 0;
+}
+
+static void stream_stop(struct snd_usb_caiaqdev *dev)
+{
+ int i;
+
+ debug("%s(%p)\n", __func__, dev);
+ if (!dev->streaming)
+ return;
+
+ dev->streaming = 0;
+
+ for (i = 0; i < N_URBS; i++) {
+ usb_kill_urb(dev->data_urbs_in[i]);
+ usb_kill_urb(dev->data_urbs_out[i]);
+ }
+}
+
+static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+ debug("%s(%p)\n", __func__, substream);
+ substream->runtime->hw = dev->pcm_info;
+ snd_pcm_limit_hw_rates(substream->runtime);
+ return 0;
+}
+
+static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+
+ debug("%s(%p)\n", __func__, substream);
+ if (all_substreams_zero(dev->sub_playback) &&
+ all_substreams_zero(dev->sub_capture)) {
+ /* when the last client has stopped streaming,
+ * all sample rates are allowed again */
+ stream_stop(dev);
+ dev->pcm_info.rates = dev->samplerates;
+ }
+
+ return 0;
+}
+
+static int snd_usb_caiaq_pcm_hw_params(struct snd_pcm_substream *sub,
+ struct snd_pcm_hw_params *hw_params)
+{
+ debug("%s(%p)\n", __func__, sub);
+ return snd_pcm_lib_malloc_pages(sub, params_buffer_bytes(hw_params));
+}
+
+static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+ debug("%s(%p)\n", __func__, sub);
+ deactivate_substream(dev, sub);
+ return snd_pcm_lib_free_pages(sub);
+}
+
+/* this should probably go upstream */
+#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
+#error "Change this table"
+#endif
+
+static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100,
+ 48000, 64000, 88200, 96000, 176400, 192000 };
+
+static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ int bytes_per_sample, bpp, ret, i;
+ int index = substream->number;
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
+
+ debug("%s(%p)\n", __func__, substream);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
+ dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
+ } else {
+ dev->period_in_count[index] = BYTES_PER_SAMPLE;
+ dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
+ }
+
+ if (dev->streaming)
+ return 0;
+
+ /* the first client that opens a stream defines the sample rate
+ * setting for all subsequent calls, until the last client closed. */
+ for (i=0; i < ARRAY_SIZE(rates); i++)
+ if (runtime->rate == rates[i])
+ dev->pcm_info.rates = 1 << i;
+
+ snd_pcm_limit_hw_rates(runtime);
+
+ bytes_per_sample = BYTES_PER_SAMPLE;
+ if (dev->spec.data_alignment == 2)
+ bytes_per_sample++;
+
+ bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
+ * bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
+
+ if (bpp > MAX_ENDPOINT_SIZE)
+ bpp = MAX_ENDPOINT_SIZE;
+
+ ret = snd_usb_caiaq_set_audio_params(dev, runtime->rate,
+ runtime->sample_bits, bpp);
+ if (ret)
+ return ret;
+
+ ret = stream_start(dev);
+ if (ret)
+ return ret;
+
+ dev->output_running = 0;
+ wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
+ if (!dev->output_running) {
+ stream_stop(dev);
+ return -EPIPE;
+ }
+
+ return 0;
+}
+
+static int snd_usb_caiaq_pcm_trigger(struct snd_pcm_substream *sub, int cmd)
+{
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ activate_substream(dev, sub);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ deactivate_substream(dev, sub);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static snd_pcm_uframes_t
+snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
+{
+ int index = sub->number;
+ struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+
+ if (dev->input_panic || dev->output_panic)
+ return SNDRV_PCM_POS_XRUN;
+
+ if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return bytes_to_frames(sub->runtime,
+ dev->audio_out_buf_pos[index]);
+ else
+ return bytes_to_frames(sub->runtime,
+ dev->audio_in_buf_pos[index]);
+}
+
+/* operators for both playback and capture */
+static struct snd_pcm_ops snd_usb_caiaq_ops = {
+ .open = snd_usb_caiaq_substream_open,
+ .close = snd_usb_caiaq_substream_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = snd_usb_caiaq_pcm_hw_params,
+ .hw_free = snd_usb_caiaq_pcm_hw_free,
+ .prepare = snd_usb_caiaq_pcm_prepare,
+ .trigger = snd_usb_caiaq_pcm_trigger,
+ .pointer = snd_usb_caiaq_pcm_pointer
+};
+
+static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
+ struct snd_pcm_substream **subs)
+{
+ int stream, pb, *cnt;
+ struct snd_pcm_substream *sub;
+
+ for (stream = 0; stream < dev->n_streams; stream++) {
+ sub = subs[stream];
+ if (!sub)
+ continue;
+
+ pb = snd_pcm_lib_period_bytes(sub);
+ cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
+ &dev->period_out_count[stream] :
+ &dev->period_in_count[stream];
+
+ if (*cnt >= pb) {
+ snd_pcm_period_elapsed(sub);
+ *cnt %= pb;
+ }
+ }
+}
+
+static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev,
+ const struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+ struct snd_pcm_substream *sub;
+ int stream, i;
+
+ if (all_substreams_zero(dev->sub_capture))
+ return;
+
+ for (i = 0; i < iso->actual_length;) {
+ for (stream = 0; stream < dev->n_streams; stream++, i++) {
+ sub = dev->sub_capture[stream];
+ if (sub) {
+ struct snd_pcm_runtime *rt = sub->runtime;
+ char *audio_buf = rt->dma_area;
+ int sz = frames_to_bytes(rt, rt->buffer_size);
+ audio_buf[dev->audio_in_buf_pos[stream]++]
+ = usb_buf[i];
+ dev->period_in_count[stream]++;
+ if (dev->audio_in_buf_pos[stream] == sz)
+ dev->audio_in_buf_pos[stream] = 0;
+ }
+ }
+ }
+}
+
+static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
+ const struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+ unsigned char check_byte;
+ struct snd_pcm_substream *sub;
+ int stream, i;
+
+ for (i = 0; i < iso->actual_length;) {
+ if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
+ for (stream = 0;
+ stream < dev->n_streams;
+ stream++, i++) {
+ if (dev->first_packet)
+ continue;
+
+ check_byte = MAKE_CHECKBYTE(dev, stream, i);
+
+ if ((usb_buf[i] & 0x3f) != check_byte)
+ dev->input_panic = 1;
+
+ if (usb_buf[i] & 0x80)
+ dev->output_panic = 1;
+ }
+ }
+ dev->first_packet = 0;
+
+ for (stream = 0; stream < dev->n_streams; stream++, i++) {
+ sub = dev->sub_capture[stream];
+ if (dev->input_panic)
+ usb_buf[i] = 0;
+
+ if (sub) {
+ struct snd_pcm_runtime *rt = sub->runtime;
+ char *audio_buf = rt->dma_area;
+ int sz = frames_to_bytes(rt, rt->buffer_size);
+ audio_buf[dev->audio_in_buf_pos[stream]++] =
+ usb_buf[i];
+ dev->period_in_count[stream]++;
+ if (dev->audio_in_buf_pos[stream] == sz)
+ dev->audio_in_buf_pos[stream] = 0;
+ }
+ }
+ }
+}
+
+static void read_in_urb(struct snd_usb_caiaqdev *dev,
+ const struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ if (!dev->streaming)
+ return;
+
+ if (iso->actual_length < dev->bpp)
+ return;
+
+ switch (dev->spec.data_alignment) {
+ case 0:
+ read_in_urb_mode0(dev, urb, iso);
+ break;
+ case 2:
+ read_in_urb_mode2(dev, urb, iso);
+ break;
+ }
+
+ if ((dev->input_panic || dev->output_panic) && !dev->warned) {
+ debug("streaming error detected %s %s\n",
+ dev->input_panic ? "(input)" : "",
+ dev->output_panic ? "(output)" : "");
+ dev->warned = 1;
+ }
+}
+
+static void fill_out_urb(struct snd_usb_caiaqdev *dev,
+ struct urb *urb,
+ const struct usb_iso_packet_descriptor *iso)
+{
+ unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
+ struct snd_pcm_substream *sub;
+ int stream, i;
+
+ for (i = 0; i < iso->length;) {
+ for (stream = 0; stream < dev->n_streams; stream++, i++) {
+ sub = dev->sub_playback[stream];
+ if (sub) {
+ struct snd_pcm_runtime *rt = sub->runtime;
+ char *audio_buf = rt->dma_area;
+ int sz = frames_to_bytes(rt, rt->buffer_size);
+ usb_buf[i] =
+ audio_buf[dev->audio_out_buf_pos[stream]];
+ dev->period_out_count[stream]++;
+ dev->audio_out_buf_pos[stream]++;
+ if (dev->audio_out_buf_pos[stream] == sz)
+ dev->audio_out_buf_pos[stream] = 0;
+ } else
+ usb_buf[i] = 0;
+ }
+
+ /* fill in the check bytes */
+ if (dev->spec.data_alignment == 2 &&
+ i % (dev->n_streams * BYTES_PER_SAMPLE_USB) ==
+ (dev->n_streams * CHANNELS_PER_STREAM))
+ for (stream = 0; stream < dev->n_streams; stream++, i++)
+ usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
+ }
+}
+
+static void read_completed(struct urb *urb)
+{
+ struct snd_usb_caiaq_cb_info *info = urb->context;
+ struct snd_usb_caiaqdev *dev;
+ struct urb *out;
+ int frame, len, send_it = 0, outframe = 0;
+
+ if (urb->status || !info)
+ return;
+
+ dev = info->dev;
+
+ if (!dev->streaming)
+ return;
+
+ out = dev->data_urbs_out[info->index];
+
+ /* read the recently received packet and send back one which has
+ * the same layout */
+ for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+ if (urb->iso_frame_desc[frame].status)
+ continue;
+
+ len = urb->iso_frame_desc[outframe].actual_length;
+ out->iso_frame_desc[outframe].length = len;
+ out->iso_frame_desc[outframe].actual_length = 0;
+ out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
+
+ if (len > 0) {
+ spin_lock(&dev->spinlock);
+ fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
+ read_in_urb(dev, urb, &urb->iso_frame_desc[frame]);
+ spin_unlock(&dev->spinlock);
+ check_for_elapsed_periods(dev, dev->sub_playback);
+ check_for_elapsed_periods(dev, dev->sub_capture);
+ send_it = 1;
+ }
+
+ outframe++;
+ }
+
+ if (send_it) {
+ out->number_of_packets = FRAMES_PER_URB;
+ out->transfer_flags = URB_ISO_ASAP;
+ usb_submit_urb(out, GFP_ATOMIC);
+ }
+
+ /* re-submit inbound urb */
+ for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+ urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
+ urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
+ urb->iso_frame_desc[frame].actual_length = 0;
+ }
+
+ urb->number_of_packets = FRAMES_PER_URB;
+ urb->transfer_flags = URB_ISO_ASAP;
+ usb_submit_urb(urb, GFP_ATOMIC);
+}
+
+static void write_completed(struct urb *urb)
+{
+ struct snd_usb_caiaq_cb_info *info = urb->context;
+ struct snd_usb_caiaqdev *dev = info->dev;
+
+ if (!dev->output_running) {
+ dev->output_running = 1;
+ wake_up(&dev->prepare_wait_queue);
+ }
+}
+
+static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
+{
+ int i, frame;
+ struct urb **urbs;
+ struct usb_device *usb_dev = dev->chip.dev;
+ unsigned int pipe;
+
+ pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ?
+ usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
+ usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
+
+ urbs = kmalloc(N_URBS * sizeof(*urbs), GFP_KERNEL);
+ if (!urbs) {
+ log("unable to kmalloc() urbs, OOM!?\n");
+ *ret = -ENOMEM;
+ return NULL;
+ }
+
+ for (i = 0; i < N_URBS; i++) {
+ urbs[i] = usb_alloc_urb(FRAMES_PER_URB, GFP_KERNEL);
+ if (!urbs[i]) {
+ log("unable to usb_alloc_urb(), OOM!?\n");
+ *ret = -ENOMEM;
+ return urbs;
+ }
+
+ urbs[i]->transfer_buffer =
+ kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
+ if (!urbs[i]->transfer_buffer) {
+ log("unable to kmalloc() transfer buffer, OOM!?\n");
+ *ret = -ENOMEM;
+ return urbs;
+ }
+
+ for (frame = 0; frame < FRAMES_PER_URB; frame++) {
+ struct usb_iso_packet_descriptor *iso =
+ &urbs[i]->iso_frame_desc[frame];
+
+ iso->offset = BYTES_PER_FRAME * frame;
+ iso->length = BYTES_PER_FRAME;
+ }
+
+ urbs[i]->dev = usb_dev;
+ urbs[i]->pipe = pipe;
+ urbs[i]->transfer_buffer_length = FRAMES_PER_URB
+ * BYTES_PER_FRAME;
+ urbs[i]->context = &dev->data_cb_info[i];
+ urbs[i]->interval = 1;
+ urbs[i]->transfer_flags = URB_ISO_ASAP;
+ urbs[i]->number_of_packets = FRAMES_PER_URB;
+ urbs[i]->complete = (dir == SNDRV_PCM_STREAM_CAPTURE) ?
+ read_completed : write_completed;
+ }
+
+ *ret = 0;
+ return urbs;
+}
+
+static void free_urbs(struct urb **urbs)
+{
+ int i;
+
+ if (!urbs)
+ return;
+
+ for (i = 0; i < N_URBS; i++) {
+ if (!urbs[i])
+ continue;
+
+ usb_kill_urb(urbs[i]);
+ kfree(urbs[i]->transfer_buffer);
+ usb_free_urb(urbs[i]);
+ }
+
+ kfree(urbs);
+}
+
+int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
+{
+ int i, ret;
+
+ dev->n_audio_in = max(dev->spec.num_analog_audio_in,
+ dev->spec.num_digital_audio_in) /
+ CHANNELS_PER_STREAM;
+ dev->n_audio_out = max(dev->spec.num_analog_audio_out,
+ dev->spec.num_digital_audio_out) /
+ CHANNELS_PER_STREAM;
+ dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
+
+ debug("dev->n_audio_in = %d\n", dev->n_audio_in);
+ debug("dev->n_audio_out = %d\n", dev->n_audio_out);
+ debug("dev->n_streams = %d\n", dev->n_streams);
+
+ if (dev->n_streams > MAX_STREAMS) {
+ log("unable to initialize device, too many streams.\n");
+ return -EINVAL;
+ }
+
+ ret = snd_pcm_new(dev->chip.card, dev->product_name, 0,
+ dev->n_audio_out, dev->n_audio_in, &dev->pcm);
+
+ if (ret < 0) {
+ log("snd_pcm_new() returned %d\n", ret);
+ return ret;
+ }
+
+ dev->pcm->private_data = dev;
+ strcpy(dev->pcm->name, dev->product_name);
+
+ memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
+ memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
+
+ memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
+ sizeof(snd_usb_caiaq_pcm_hardware));
+
+ /* setup samplerates */
+ dev->samplerates = dev->pcm_info.rates;
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
+ dev->samplerates |= SNDRV_PCM_RATE_192000;
+ /* fall thru */
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+ dev->samplerates |= SNDRV_PCM_RATE_88200;
+ break;
+ }
+
+ snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ &snd_usb_caiaq_ops);
+ snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE,
+ &snd_usb_caiaq_ops);
+
+ snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
+ SNDRV_DMA_TYPE_CONTINUOUS,
+ snd_dma_continuous_data(GFP_KERNEL),
+ MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
+
+ dev->data_cb_info =
+ kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS,
+ GFP_KERNEL);
+
+ if (!dev->data_cb_info)
+ return -ENOMEM;
+
+ for (i = 0; i < N_URBS; i++) {
+ dev->data_cb_info[i].dev = dev;
+ dev->data_cb_info[i].index = i;
+ }
+
+ dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
+ if (ret < 0) {
+ kfree(dev->data_cb_info);
+ free_urbs(dev->data_urbs_in);
+ return ret;
+ }
+
+ dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
+ if (ret < 0) {
+ kfree(dev->data_cb_info);
+ free_urbs(dev->data_urbs_in);
+ free_urbs(dev->data_urbs_out);
+ return ret;
+ }
+
+ return 0;
+}
+
+void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev)
+{
+ debug("%s(%p)\n", __func__, dev);
+ stream_stop(dev);
+ free_urbs(dev->data_urbs_in);
+ free_urbs(dev->data_urbs_out);
+ kfree(dev->data_cb_info);
+}
+
--- /dev/null
+#ifndef CAIAQ_AUDIO_H
+#define CAIAQ_AUDIO_H
+
+int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev);
+
+#endif /* CAIAQ_AUDIO_H */
+++ /dev/null
-/*
- * Copyright (c) 2006-2008 Daniel Mack, Karsten Wiese
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <linux/input.h>
-
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
-
-#define N_URBS 32
-#define CLOCK_DRIFT_TOLERANCE 5
-#define FRAMES_PER_URB 8
-#define BYTES_PER_FRAME 512
-#define CHANNELS_PER_STREAM 2
-#define BYTES_PER_SAMPLE 3
-#define BYTES_PER_SAMPLE_USB 4
-#define MAX_BUFFER_SIZE (128*1024)
-#define MAX_ENDPOINT_SIZE 512
-
-#define ENDPOINT_CAPTURE 2
-#define ENDPOINT_PLAYBACK 6
-
-#define MAKE_CHECKBYTE(dev,stream,i) \
- (stream << 1) | (~(i / (dev->n_streams * BYTES_PER_SAMPLE_USB)) & 1)
-
-static struct snd_pcm_hardware snd_usb_caiaq_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER),
- .formats = SNDRV_PCM_FMTBIT_S24_3BE,
- .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
- SNDRV_PCM_RATE_96000),
- .rate_min = 44100,
- .rate_max = 0, /* will overwrite later */
- .channels_min = CHANNELS_PER_STREAM,
- .channels_max = CHANNELS_PER_STREAM,
- .buffer_bytes_max = MAX_BUFFER_SIZE,
- .period_bytes_min = 128,
- .period_bytes_max = MAX_BUFFER_SIZE,
- .periods_min = 1,
- .periods_max = 1024,
-};
-
-static void
-activate_substream(struct snd_usb_caiaqdev *dev,
- struct snd_pcm_substream *sub)
-{
- if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dev->sub_playback[sub->number] = sub;
- else
- dev->sub_capture[sub->number] = sub;
-}
-
-static void
-deactivate_substream(struct snd_usb_caiaqdev *dev,
- struct snd_pcm_substream *sub)
-{
- unsigned long flags;
- spin_lock_irqsave(&dev->spinlock, flags);
-
- if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dev->sub_playback[sub->number] = NULL;
- else
- dev->sub_capture[sub->number] = NULL;
-
- spin_unlock_irqrestore(&dev->spinlock, flags);
-}
-
-static int
-all_substreams_zero(struct snd_pcm_substream **subs)
-{
- int i;
- for (i = 0; i < MAX_STREAMS; i++)
- if (subs[i] != NULL)
- return 0;
- return 1;
-}
-
-static int stream_start(struct snd_usb_caiaqdev *dev)
-{
- int i, ret;
-
- debug("%s(%p)\n", __func__, dev);
-
- if (dev->streaming)
- return -EINVAL;
-
- memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
- memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
- dev->input_panic = 0;
- dev->output_panic = 0;
- dev->first_packet = 1;
- dev->streaming = 1;
- dev->warned = 0;
-
- for (i = 0; i < N_URBS; i++) {
- ret = usb_submit_urb(dev->data_urbs_in[i], GFP_ATOMIC);
- if (ret) {
- log("unable to trigger read #%d! (ret %d)\n", i, ret);
- dev->streaming = 0;
- return -EPIPE;
- }
- }
-
- return 0;
-}
-
-static void stream_stop(struct snd_usb_caiaqdev *dev)
-{
- int i;
-
- debug("%s(%p)\n", __func__, dev);
- if (!dev->streaming)
- return;
-
- dev->streaming = 0;
-
- for (i = 0; i < N_URBS; i++) {
- usb_kill_urb(dev->data_urbs_in[i]);
- usb_kill_urb(dev->data_urbs_out[i]);
- }
-}
-
-static int snd_usb_caiaq_substream_open(struct snd_pcm_substream *substream)
-{
- struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
- debug("%s(%p)\n", __func__, substream);
- substream->runtime->hw = dev->pcm_info;
- snd_pcm_limit_hw_rates(substream->runtime);
- return 0;
-}
-
-static int snd_usb_caiaq_substream_close(struct snd_pcm_substream *substream)
-{
- struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
-
- debug("%s(%p)\n", __func__, substream);
- if (all_substreams_zero(dev->sub_playback) &&
- all_substreams_zero(dev->sub_capture)) {
- /* when the last client has stopped streaming,
- * all sample rates are allowed again */
- stream_stop(dev);
- dev->pcm_info.rates = dev->samplerates;
- }
-
- return 0;
-}
-
-static int snd_usb_caiaq_pcm_hw_params(struct snd_pcm_substream *sub,
- struct snd_pcm_hw_params *hw_params)
-{
- debug("%s(%p)\n", __func__, sub);
- return snd_pcm_lib_malloc_pages(sub, params_buffer_bytes(hw_params));
-}
-
-static int snd_usb_caiaq_pcm_hw_free(struct snd_pcm_substream *sub)
-{
- struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
- debug("%s(%p)\n", __func__, sub);
- deactivate_substream(dev, sub);
- return snd_pcm_lib_free_pages(sub);
-}
-
-/* this should probably go upstream */
-#if SNDRV_PCM_RATE_5512 != 1 << 0 || SNDRV_PCM_RATE_192000 != 1 << 12
-#error "Change this table"
-#endif
-
-static unsigned int rates[] = { 5512, 8000, 11025, 16000, 22050, 32000, 44100,
- 48000, 64000, 88200, 96000, 176400, 192000 };
-
-static int snd_usb_caiaq_pcm_prepare(struct snd_pcm_substream *substream)
-{
- int bytes_per_sample, bpp, ret, i;
- int index = substream->number;
- struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(substream);
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- debug("%s(%p)\n", __func__, substream);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
- else
- dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
-
- if (dev->streaming)
- return 0;
-
- /* the first client that opens a stream defines the sample rate
- * setting for all subsequent calls, until the last client closed. */
- for (i=0; i < ARRAY_SIZE(rates); i++)
- if (runtime->rate == rates[i])
- dev->pcm_info.rates = 1 << i;
-
- snd_pcm_limit_hw_rates(runtime);
-
- bytes_per_sample = BYTES_PER_SAMPLE;
- if (dev->spec.data_alignment == 2)
- bytes_per_sample++;
-
- bpp = ((runtime->rate / 8000) + CLOCK_DRIFT_TOLERANCE)
- * bytes_per_sample * CHANNELS_PER_STREAM * dev->n_streams;
-
- if (bpp > MAX_ENDPOINT_SIZE)
- bpp = MAX_ENDPOINT_SIZE;
-
- ret = snd_usb_caiaq_set_audio_params(dev, runtime->rate,
- runtime->sample_bits, bpp);
- if (ret)
- return ret;
-
- ret = stream_start(dev);
- if (ret)
- return ret;
-
- dev->output_running = 0;
- wait_event_timeout(dev->prepare_wait_queue, dev->output_running, HZ);
- if (!dev->output_running) {
- stream_stop(dev);
- return -EPIPE;
- }
-
- return 0;
-}
-
-static int snd_usb_caiaq_pcm_trigger(struct snd_pcm_substream *sub, int cmd)
-{
- struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- activate_substream(dev, sub);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- deactivate_substream(dev, sub);
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static snd_pcm_uframes_t
-snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub)
-{
- int index = sub->number;
- struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
-
- if (dev->input_panic || dev->output_panic)
- return SNDRV_PCM_POS_XRUN;
-
- if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
- return bytes_to_frames(sub->runtime,
- dev->audio_out_buf_pos[index]);
- else
- return bytes_to_frames(sub->runtime,
- dev->audio_in_buf_pos[index]);
-}
-
-/* operators for both playback and capture */
-static struct snd_pcm_ops snd_usb_caiaq_ops = {
- .open = snd_usb_caiaq_substream_open,
- .close = snd_usb_caiaq_substream_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = snd_usb_caiaq_pcm_hw_params,
- .hw_free = snd_usb_caiaq_pcm_hw_free,
- .prepare = snd_usb_caiaq_pcm_prepare,
- .trigger = snd_usb_caiaq_pcm_trigger,
- .pointer = snd_usb_caiaq_pcm_pointer
-};
-
-static void check_for_elapsed_periods(struct snd_usb_caiaqdev *dev,
- struct snd_pcm_substream **subs)
-{
- int stream, pb, *cnt;
- struct snd_pcm_substream *sub;
-
- for (stream = 0; stream < dev->n_streams; stream++) {
- sub = subs[stream];
- if (!sub)
- continue;
-
- pb = frames_to_bytes(sub->runtime,
- sub->runtime->period_size);
- cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- &dev->period_out_count[stream] :
- &dev->period_in_count[stream];
-
- if (*cnt >= pb) {
- snd_pcm_period_elapsed(sub);
- *cnt %= pb;
- }
- }
-}
-
-static void read_in_urb_mode0(struct snd_usb_caiaqdev *dev,
- const struct urb *urb,
- const struct usb_iso_packet_descriptor *iso)
-{
- unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
- struct snd_pcm_substream *sub;
- int stream, i;
-
- if (all_substreams_zero(dev->sub_capture))
- return;
-
- for (i = 0; i < iso->actual_length;) {
- for (stream = 0; stream < dev->n_streams; stream++, i++) {
- sub = dev->sub_capture[stream];
- if (sub) {
- struct snd_pcm_runtime *rt = sub->runtime;
- char *audio_buf = rt->dma_area;
- int sz = frames_to_bytes(rt, rt->buffer_size);
- audio_buf[dev->audio_in_buf_pos[stream]++]
- = usb_buf[i];
- dev->period_in_count[stream]++;
- if (dev->audio_in_buf_pos[stream] == sz)
- dev->audio_in_buf_pos[stream] = 0;
- }
- }
- }
-}
-
-static void read_in_urb_mode2(struct snd_usb_caiaqdev *dev,
- const struct urb *urb,
- const struct usb_iso_packet_descriptor *iso)
-{
- unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
- unsigned char check_byte;
- struct snd_pcm_substream *sub;
- int stream, i;
-
- for (i = 0; i < iso->actual_length;) {
- if (i % (dev->n_streams * BYTES_PER_SAMPLE_USB) == 0) {
- for (stream = 0;
- stream < dev->n_streams;
- stream++, i++) {
- if (dev->first_packet)
- continue;
-
- check_byte = MAKE_CHECKBYTE(dev, stream, i);
-
- if ((usb_buf[i] & 0x3f) != check_byte)
- dev->input_panic = 1;
-
- if (usb_buf[i] & 0x80)
- dev->output_panic = 1;
- }
- }
- dev->first_packet = 0;
-
- for (stream = 0; stream < dev->n_streams; stream++, i++) {
- sub = dev->sub_capture[stream];
- if (dev->input_panic)
- usb_buf[i] = 0;
-
- if (sub) {
- struct snd_pcm_runtime *rt = sub->runtime;
- char *audio_buf = rt->dma_area;
- int sz = frames_to_bytes(rt, rt->buffer_size);
- audio_buf[dev->audio_in_buf_pos[stream]++] =
- usb_buf[i];
- dev->period_in_count[stream]++;
- if (dev->audio_in_buf_pos[stream] == sz)
- dev->audio_in_buf_pos[stream] = 0;
- }
- }
- }
-}
-
-static void read_in_urb(struct snd_usb_caiaqdev *dev,
- const struct urb *urb,
- const struct usb_iso_packet_descriptor *iso)
-{
- if (!dev->streaming)
- return;
-
- if (iso->actual_length < dev->bpp)
- return;
-
- switch (dev->spec.data_alignment) {
- case 0:
- read_in_urb_mode0(dev, urb, iso);
- break;
- case 2:
- read_in_urb_mode2(dev, urb, iso);
- break;
- }
-
- if ((dev->input_panic || dev->output_panic) && !dev->warned) {
- debug("streaming error detected %s %s\n",
- dev->input_panic ? "(input)" : "",
- dev->output_panic ? "(output)" : "");
- dev->warned = 1;
- }
-}
-
-static void fill_out_urb(struct snd_usb_caiaqdev *dev,
- struct urb *urb,
- const struct usb_iso_packet_descriptor *iso)
-{
- unsigned char *usb_buf = urb->transfer_buffer + iso->offset;
- struct snd_pcm_substream *sub;
- int stream, i;
-
- for (i = 0; i < iso->length;) {
- for (stream = 0; stream < dev->n_streams; stream++, i++) {
- sub = dev->sub_playback[stream];
- if (sub) {
- struct snd_pcm_runtime *rt = sub->runtime;
- char *audio_buf = rt->dma_area;
- int sz = frames_to_bytes(rt, rt->buffer_size);
- usb_buf[i] =
- audio_buf[dev->audio_out_buf_pos[stream]];
- dev->period_out_count[stream]++;
- dev->audio_out_buf_pos[stream]++;
- if (dev->audio_out_buf_pos[stream] == sz)
- dev->audio_out_buf_pos[stream] = 0;
- } else
- usb_buf[i] = 0;
- }
-
- /* fill in the check bytes */
- if (dev->spec.data_alignment == 2 &&
- i % (dev->n_streams * BYTES_PER_SAMPLE_USB) ==
- (dev->n_streams * CHANNELS_PER_STREAM))
- for (stream = 0; stream < dev->n_streams; stream++, i++)
- usb_buf[i] = MAKE_CHECKBYTE(dev, stream, i);
- }
-}
-
-static void read_completed(struct urb *urb)
-{
- struct snd_usb_caiaq_cb_info *info = urb->context;
- struct snd_usb_caiaqdev *dev;
- struct urb *out;
- int frame, len, send_it = 0, outframe = 0;
-
- if (urb->status || !info)
- return;
-
- dev = info->dev;
-
- if (!dev->streaming)
- return;
-
- out = dev->data_urbs_out[info->index];
-
- /* read the recently received packet and send back one which has
- * the same layout */
- for (frame = 0; frame < FRAMES_PER_URB; frame++) {
- if (urb->iso_frame_desc[frame].status)
- continue;
-
- len = urb->iso_frame_desc[outframe].actual_length;
- out->iso_frame_desc[outframe].length = len;
- out->iso_frame_desc[outframe].actual_length = 0;
- out->iso_frame_desc[outframe].offset = BYTES_PER_FRAME * frame;
-
- if (len > 0) {
- spin_lock(&dev->spinlock);
- fill_out_urb(dev, out, &out->iso_frame_desc[outframe]);
- read_in_urb(dev, urb, &urb->iso_frame_desc[frame]);
- spin_unlock(&dev->spinlock);
- check_for_elapsed_periods(dev, dev->sub_playback);
- check_for_elapsed_periods(dev, dev->sub_capture);
- send_it = 1;
- }
-
- outframe++;
- }
-
- if (send_it) {
- out->number_of_packets = FRAMES_PER_URB;
- out->transfer_flags = URB_ISO_ASAP;
- usb_submit_urb(out, GFP_ATOMIC);
- }
-
- /* re-submit inbound urb */
- for (frame = 0; frame < FRAMES_PER_URB; frame++) {
- urb->iso_frame_desc[frame].offset = BYTES_PER_FRAME * frame;
- urb->iso_frame_desc[frame].length = BYTES_PER_FRAME;
- urb->iso_frame_desc[frame].actual_length = 0;
- }
-
- urb->number_of_packets = FRAMES_PER_URB;
- urb->transfer_flags = URB_ISO_ASAP;
- usb_submit_urb(urb, GFP_ATOMIC);
-}
-
-static void write_completed(struct urb *urb)
-{
- struct snd_usb_caiaq_cb_info *info = urb->context;
- struct snd_usb_caiaqdev *dev = info->dev;
-
- if (!dev->output_running) {
- dev->output_running = 1;
- wake_up(&dev->prepare_wait_queue);
- }
-}
-
-static struct urb **alloc_urbs(struct snd_usb_caiaqdev *dev, int dir, int *ret)
-{
- int i, frame;
- struct urb **urbs;
- struct usb_device *usb_dev = dev->chip.dev;
- unsigned int pipe;
-
- pipe = (dir == SNDRV_PCM_STREAM_PLAYBACK) ?
- usb_sndisocpipe(usb_dev, ENDPOINT_PLAYBACK) :
- usb_rcvisocpipe(usb_dev, ENDPOINT_CAPTURE);
-
- urbs = kmalloc(N_URBS * sizeof(*urbs), GFP_KERNEL);
- if (!urbs) {
- log("unable to kmalloc() urbs, OOM!?\n");
- *ret = -ENOMEM;
- return NULL;
- }
-
- for (i = 0; i < N_URBS; i++) {
- urbs[i] = usb_alloc_urb(FRAMES_PER_URB, GFP_KERNEL);
- if (!urbs[i]) {
- log("unable to usb_alloc_urb(), OOM!?\n");
- *ret = -ENOMEM;
- return urbs;
- }
-
- urbs[i]->transfer_buffer =
- kmalloc(FRAMES_PER_URB * BYTES_PER_FRAME, GFP_KERNEL);
- if (!urbs[i]->transfer_buffer) {
- log("unable to kmalloc() transfer buffer, OOM!?\n");
- *ret = -ENOMEM;
- return urbs;
- }
-
- for (frame = 0; frame < FRAMES_PER_URB; frame++) {
- struct usb_iso_packet_descriptor *iso =
- &urbs[i]->iso_frame_desc[frame];
-
- iso->offset = BYTES_PER_FRAME * frame;
- iso->length = BYTES_PER_FRAME;
- }
-
- urbs[i]->dev = usb_dev;
- urbs[i]->pipe = pipe;
- urbs[i]->transfer_buffer_length = FRAMES_PER_URB
- * BYTES_PER_FRAME;
- urbs[i]->context = &dev->data_cb_info[i];
- urbs[i]->interval = 1;
- urbs[i]->transfer_flags = URB_ISO_ASAP;
- urbs[i]->number_of_packets = FRAMES_PER_URB;
- urbs[i]->complete = (dir == SNDRV_PCM_STREAM_CAPTURE) ?
- read_completed : write_completed;
- }
-
- *ret = 0;
- return urbs;
-}
-
-static void free_urbs(struct urb **urbs)
-{
- int i;
-
- if (!urbs)
- return;
-
- for (i = 0; i < N_URBS; i++) {
- if (!urbs[i])
- continue;
-
- usb_kill_urb(urbs[i]);
- kfree(urbs[i]->transfer_buffer);
- usb_free_urb(urbs[i]);
- }
-
- kfree(urbs);
-}
-
-int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
-{
- int i, ret;
-
- dev->n_audio_in = max(dev->spec.num_analog_audio_in,
- dev->spec.num_digital_audio_in) /
- CHANNELS_PER_STREAM;
- dev->n_audio_out = max(dev->spec.num_analog_audio_out,
- dev->spec.num_digital_audio_out) /
- CHANNELS_PER_STREAM;
- dev->n_streams = max(dev->n_audio_in, dev->n_audio_out);
-
- debug("dev->n_audio_in = %d\n", dev->n_audio_in);
- debug("dev->n_audio_out = %d\n", dev->n_audio_out);
- debug("dev->n_streams = %d\n", dev->n_streams);
-
- if (dev->n_streams > MAX_STREAMS) {
- log("unable to initialize device, too many streams.\n");
- return -EINVAL;
- }
-
- ret = snd_pcm_new(dev->chip.card, dev->product_name, 0,
- dev->n_audio_out, dev->n_audio_in, &dev->pcm);
-
- if (ret < 0) {
- log("snd_pcm_new() returned %d\n", ret);
- return ret;
- }
-
- dev->pcm->private_data = dev;
- strcpy(dev->pcm->name, dev->product_name);
-
- memset(dev->sub_playback, 0, sizeof(dev->sub_playback));
- memset(dev->sub_capture, 0, sizeof(dev->sub_capture));
-
- memcpy(&dev->pcm_info, &snd_usb_caiaq_pcm_hardware,
- sizeof(snd_usb_caiaq_pcm_hardware));
-
- /* setup samplerates */
- dev->samplerates = dev->pcm_info.rates;
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_SESSIONIO):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
- dev->samplerates |= SNDRV_PCM_RATE_192000;
- /* fall thru */
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
- dev->samplerates |= SNDRV_PCM_RATE_88200;
- break;
- }
-
- snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_PLAYBACK,
- &snd_usb_caiaq_ops);
- snd_pcm_set_ops(dev->pcm, SNDRV_PCM_STREAM_CAPTURE,
- &snd_usb_caiaq_ops);
-
- snd_pcm_lib_preallocate_pages_for_all(dev->pcm,
- SNDRV_DMA_TYPE_CONTINUOUS,
- snd_dma_continuous_data(GFP_KERNEL),
- MAX_BUFFER_SIZE, MAX_BUFFER_SIZE);
-
- dev->data_cb_info =
- kmalloc(sizeof(struct snd_usb_caiaq_cb_info) * N_URBS,
- GFP_KERNEL);
-
- if (!dev->data_cb_info)
- return -ENOMEM;
-
- for (i = 0; i < N_URBS; i++) {
- dev->data_cb_info[i].dev = dev;
- dev->data_cb_info[i].index = i;
- }
-
- dev->data_urbs_in = alloc_urbs(dev, SNDRV_PCM_STREAM_CAPTURE, &ret);
- if (ret < 0) {
- kfree(dev->data_cb_info);
- free_urbs(dev->data_urbs_in);
- return ret;
- }
-
- dev->data_urbs_out = alloc_urbs(dev, SNDRV_PCM_STREAM_PLAYBACK, &ret);
- if (ret < 0) {
- kfree(dev->data_cb_info);
- free_urbs(dev->data_urbs_in);
- free_urbs(dev->data_urbs_out);
- return ret;
- }
-
- return 0;
-}
-
-void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev)
-{
- debug("%s(%p)\n", __func__, dev);
- stream_stop(dev);
- free_urbs(dev->data_urbs_in);
- free_urbs(dev->data_urbs_out);
- kfree(dev->data_cb_info);
-}
-
+++ /dev/null
-#ifndef CAIAQ_AUDIO_H
-#define CAIAQ_AUDIO_H
-
-int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev);
-void snd_usb_caiaq_audio_free(struct snd_usb_caiaqdev *dev);
-
-#endif /* CAIAQ_AUDIO_H */
+++ /dev/null
-/*
- * Copyright (c) 2007 Daniel Mack
- * friendly supported by NI.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
-#include <linux/input.h>
-
-#include "caiaq-device.h"
-#include "caiaq-control.h"
-
-#define CNT_INTVAL 0x10000
-
-static int control_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol);
- struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
- int pos = kcontrol->private_value;
- int is_intval = pos & CNT_INTVAL;
- unsigned int id = dev->chip.usb_id;
-
- uinfo->count = 1;
- pos &= ~CNT_INTVAL;
-
- if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)
- && (pos == 0)) {
- /* current input mode of A8DJ */
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 2;
- return 0;
- }
-
- if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)
- && (pos == 0)) {
- /* current input mode of A4DJ */
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- return 0;
- }
-
- if (is_intval) {
- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 64;
- } else {
- uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
- uinfo->value.integer.min = 0;
- uinfo->value.integer.max = 1;
- }
-
- return 0;
-}
-
-static int control_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol);
- struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
- int pos = kcontrol->private_value;
-
- if (dev->chip.usb_id ==
- USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
- /* A4DJ has only one control */
- /* do not expose hardware input mode 0 */
- ucontrol->value.integer.value[0] = dev->control_state[0] - 1;
- return 0;
- }
-
- if (pos & CNT_INTVAL)
- ucontrol->value.integer.value[0]
- = dev->control_state[pos & ~CNT_INTVAL];
- else
- ucontrol->value.integer.value[0]
- = !!(dev->control_state[pos / 8] & (1 << pos % 8));
-
- return 0;
-}
-
-static int control_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol);
- struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
- int pos = kcontrol->private_value;
-
- if (dev->chip.usb_id ==
- USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
- /* A4DJ has only one control */
- /* do not expose hardware input mode 0 */
- dev->control_state[0] = ucontrol->value.integer.value[0] + 1;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
- dev->control_state, sizeof(dev->control_state));
- return 1;
- }
-
- if (pos & CNT_INTVAL) {
- dev->control_state[pos & ~CNT_INTVAL]
- = ucontrol->value.integer.value[0];
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
- dev->control_state, sizeof(dev->control_state));
- } else {
- if (ucontrol->value.integer.value[0])
- dev->control_state[pos / 8] |= 1 << (pos % 8);
- else
- dev->control_state[pos / 8] &= ~(1 << (pos % 8));
-
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
- dev->control_state, sizeof(dev->control_state));
- }
-
- return 1;
-}
-
-static struct snd_kcontrol_new kcontrol_template __devinitdata = {
- .iface = SNDRV_CTL_ELEM_IFACE_HWDEP,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
- .index = 0,
- .info = control_info,
- .get = control_get,
- .put = control_put,
- /* name and private_value filled later */
-};
-
-struct caiaq_controller {
- char *name;
- int index;
-};
-
-static struct caiaq_controller ak1_controller[] = {
- { "LED left", 2 },
- { "LED middle", 1 },
- { "LED right", 0 },
- { "LED ring", 3 }
-};
-
-static struct caiaq_controller rk2_controller[] = {
- { "LED 1", 5 },
- { "LED 2", 4 },
- { "LED 3", 3 },
- { "LED 4", 2 },
- { "LED 5", 1 },
- { "LED 6", 0 },
- { "LED pedal", 6 },
- { "LED 7seg_1b", 8 },
- { "LED 7seg_1c", 9 },
- { "LED 7seg_2a", 10 },
- { "LED 7seg_2b", 11 },
- { "LED 7seg_2c", 12 },
- { "LED 7seg_2d", 13 },
- { "LED 7seg_2e", 14 },
- { "LED 7seg_2f", 15 },
- { "LED 7seg_2g", 16 },
- { "LED 7seg_3a", 17 },
- { "LED 7seg_3b", 18 },
- { "LED 7seg_3c", 19 },
- { "LED 7seg_3d", 20 },
- { "LED 7seg_3e", 21 },
- { "LED 7seg_3f", 22 },
- { "LED 7seg_3g", 23 }
-};
-
-static struct caiaq_controller rk3_controller[] = {
- { "LED 7seg_1a", 0 + 0 },
- { "LED 7seg_1b", 0 + 1 },
- { "LED 7seg_1c", 0 + 2 },
- { "LED 7seg_1d", 0 + 3 },
- { "LED 7seg_1e", 0 + 4 },
- { "LED 7seg_1f", 0 + 5 },
- { "LED 7seg_1g", 0 + 6 },
- { "LED 7seg_1p", 0 + 7 },
-
- { "LED 7seg_2a", 8 + 0 },
- { "LED 7seg_2b", 8 + 1 },
- { "LED 7seg_2c", 8 + 2 },
- { "LED 7seg_2d", 8 + 3 },
- { "LED 7seg_2e", 8 + 4 },
- { "LED 7seg_2f", 8 + 5 },
- { "LED 7seg_2g", 8 + 6 },
- { "LED 7seg_2p", 8 + 7 },
-
- { "LED 7seg_3a", 16 + 0 },
- { "LED 7seg_3b", 16 + 1 },
- { "LED 7seg_3c", 16 + 2 },
- { "LED 7seg_3d", 16 + 3 },
- { "LED 7seg_3e", 16 + 4 },
- { "LED 7seg_3f", 16 + 5 },
- { "LED 7seg_3g", 16 + 6 },
- { "LED 7seg_3p", 16 + 7 },
-
- { "LED 7seg_4a", 24 + 0 },
- { "LED 7seg_4b", 24 + 1 },
- { "LED 7seg_4c", 24 + 2 },
- { "LED 7seg_4d", 24 + 3 },
- { "LED 7seg_4e", 24 + 4 },
- { "LED 7seg_4f", 24 + 5 },
- { "LED 7seg_4g", 24 + 6 },
- { "LED 7seg_4p", 24 + 7 },
-
- { "LED 1", 32 + 0 },
- { "LED 2", 32 + 1 },
- { "LED 3", 32 + 2 },
- { "LED 4", 32 + 3 },
- { "LED 5", 32 + 4 },
- { "LED 6", 32 + 5 },
- { "LED 7", 32 + 6 },
- { "LED 8", 32 + 7 },
- { "LED pedal", 32 + 8 }
-};
-
-static struct caiaq_controller kore_controller[] = {
- { "LED F1", 8 | CNT_INTVAL },
- { "LED F2", 12 | CNT_INTVAL },
- { "LED F3", 0 | CNT_INTVAL },
- { "LED F4", 4 | CNT_INTVAL },
- { "LED F5", 11 | CNT_INTVAL },
- { "LED F6", 15 | CNT_INTVAL },
- { "LED F7", 3 | CNT_INTVAL },
- { "LED F8", 7 | CNT_INTVAL },
- { "LED touch1", 10 | CNT_INTVAL },
- { "LED touch2", 14 | CNT_INTVAL },
- { "LED touch3", 2 | CNT_INTVAL },
- { "LED touch4", 6 | CNT_INTVAL },
- { "LED touch5", 9 | CNT_INTVAL },
- { "LED touch6", 13 | CNT_INTVAL },
- { "LED touch7", 1 | CNT_INTVAL },
- { "LED touch8", 5 | CNT_INTVAL },
- { "LED left", 18 | CNT_INTVAL },
- { "LED right", 22 | CNT_INTVAL },
- { "LED up", 16 | CNT_INTVAL },
- { "LED down", 20 | CNT_INTVAL },
- { "LED stop", 23 | CNT_INTVAL },
- { "LED play", 21 | CNT_INTVAL },
- { "LED record", 19 | CNT_INTVAL },
- { "LED listen", 17 | CNT_INTVAL },
- { "LED lcd", 30 | CNT_INTVAL },
- { "LED menu", 28 | CNT_INTVAL },
- { "LED sound", 31 | CNT_INTVAL },
- { "LED esc", 29 | CNT_INTVAL },
- { "LED view", 27 | CNT_INTVAL },
- { "LED enter", 24 | CNT_INTVAL },
- { "LED control", 26 | CNT_INTVAL }
-};
-
-static struct caiaq_controller a8dj_controller[] = {
- { "Current input mode", 0 | CNT_INTVAL },
- { "GND lift for TC Vinyl mode", 24 + 0 },
- { "GND lift for TC CD/Line mode", 24 + 1 },
- { "GND lift for phono mode", 24 + 2 },
- { "Software lock", 40 }
-};
-
-static struct caiaq_controller a4dj_controller[] = {
- { "Current input mode", 0 | CNT_INTVAL }
-};
-
-static int __devinit add_controls(struct caiaq_controller *c, int num,
- struct snd_usb_caiaqdev *dev)
-{
- int i, ret;
- struct snd_kcontrol *kc;
-
- for (i = 0; i < num; i++, c++) {
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- ret = snd_ctl_add(dev->chip.card, kc);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
-{
- int ret = 0;
-
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- ret = add_controls(ak1_controller,
- ARRAY_SIZE(ak1_controller), dev);
- break;
-
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
- ret = add_controls(rk2_controller,
- ARRAY_SIZE(rk2_controller), dev);
- break;
-
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- ret = add_controls(rk3_controller,
- ARRAY_SIZE(rk3_controller), dev);
- break;
-
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
- ret = add_controls(kore_controller,
- ARRAY_SIZE(kore_controller), dev);
- break;
-
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
- ret = add_controls(a8dj_controller,
- ARRAY_SIZE(a8dj_controller), dev);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
- ret = add_controls(a4dj_controller,
- ARRAY_SIZE(a4dj_controller), dev);
- break;
- }
-
- return ret;
-}
-
+++ /dev/null
-#ifndef CAIAQ_CONTROL_H
-#define CAIAQ_CONTROL_H
-
-int snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev);
-
-#endif /* CAIAQ_CONTROL_H */
+++ /dev/null
-/*
- * caiaq.c: ALSA driver for caiaq/NativeInstruments devices
- *
- * Copyright (c) 2007 Daniel Mack <daniel@caiaq.de>
- * Karsten Wiese <fzu@wemgehoertderstaat.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/initval.h>
-#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
-
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
-#include "caiaq-midi.h"
-#include "caiaq-control.h"
-
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
-#include "caiaq-input.h"
-#endif
-
-MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
- "{Native Instruments, RigKontrol3},"
- "{Native Instruments, Kore Controller},"
- "{Native Instruments, Kore Controller 2},"
- "{Native Instruments, Audio Kontrol 1},"
- "{Native Instruments, Audio 4 DJ},"
- "{Native Instruments, Audio 8 DJ},"
- "{Native Instruments, Session I/O},"
- "{Native Instruments, GuitarRig mobile}");
-
-static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
-static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
-static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
-static int snd_card_used[SNDRV_CARDS];
-
-module_param_array(index, int, NULL, 0444);
-MODULE_PARM_DESC(index, "Index value for the caiaq sound device");
-module_param_array(id, charp, NULL, 0444);
-MODULE_PARM_DESC(id, "ID string for the caiaq soundcard.");
-module_param_array(enable, bool, NULL, 0444);
-MODULE_PARM_DESC(enable, "Enable the caiaq soundcard.");
-
-enum {
- SAMPLERATE_44100 = 0,
- SAMPLERATE_48000 = 1,
- SAMPLERATE_96000 = 2,
- SAMPLERATE_192000 = 3,
- SAMPLERATE_88200 = 4,
- SAMPLERATE_INVALID = 0xff
-};
-
-enum {
- DEPTH_NONE = 0,
- DEPTH_16 = 1,
- DEPTH_24 = 2,
- DEPTH_32 = 3
-};
-
-static struct usb_device_id snd_usb_id_table[] = {
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_RIGKONTROL2
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_RIGKONTROL3
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_KORECONTROLLER
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_KORECONTROLLER2
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_AK1
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_AUDIO8DJ
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_SESSIONIO
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_GUITARRIGMOBILE
- },
- {
- .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
- .idVendor = USB_VID_NATIVEINSTRUMENTS,
- .idProduct = USB_PID_AUDIO4DJ
- },
- { /* terminator */ }
-};
-
-static void usb_ep1_command_reply_dispatch (struct urb* urb)
-{
- int ret;
- struct snd_usb_caiaqdev *dev = urb->context;
- unsigned char *buf = urb->transfer_buffer;
-
- if (urb->status || !dev) {
- log("received EP1 urb->status = %i\n", urb->status);
- return;
- }
-
- switch(buf[0]) {
- case EP1_CMD_GET_DEVICE_INFO:
- memcpy(&dev->spec, buf+1, sizeof(struct caiaq_device_spec));
- dev->spec.fw_version = le16_to_cpu(dev->spec.fw_version);
- debug("device spec (firmware %d): audio: %d in, %d out, "
- "MIDI: %d in, %d out, data alignment %d\n",
- dev->spec.fw_version,
- dev->spec.num_analog_audio_in,
- dev->spec.num_analog_audio_out,
- dev->spec.num_midi_in,
- dev->spec.num_midi_out,
- dev->spec.data_alignment);
-
- dev->spec_received++;
- wake_up(&dev->ep1_wait_queue);
- break;
- case EP1_CMD_AUDIO_PARAMS:
- dev->audio_parm_answer = buf[1];
- wake_up(&dev->ep1_wait_queue);
- break;
- case EP1_CMD_MIDI_READ:
- snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]);
- break;
- case EP1_CMD_READ_IO:
- if (dev->chip.usb_id ==
- USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) {
- if (urb->actual_length > sizeof(dev->control_state))
- urb->actual_length = sizeof(dev->control_state);
- memcpy(dev->control_state, buf + 1, urb->actual_length);
- wake_up(&dev->ep1_wait_queue);
- break;
- }
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
- case EP1_CMD_READ_ERP:
- case EP1_CMD_READ_ANALOG:
- snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length);
-#endif
- break;
- }
-
- dev->ep1_in_urb.actual_length = 0;
- ret = usb_submit_urb(&dev->ep1_in_urb, GFP_ATOMIC);
- if (ret < 0)
- log("unable to submit urb. OOM!?\n");
-}
-
-int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
- unsigned char command,
- const unsigned char *buffer,
- int len)
-{
- int actual_len;
- struct usb_device *usb_dev = dev->chip.dev;
-
- if (!usb_dev)
- return -EIO;
-
- if (len > EP1_BUFSIZE - 1)
- len = EP1_BUFSIZE - 1;
-
- if (buffer && len > 0)
- memcpy(dev->ep1_out_buf+1, buffer, len);
-
- dev->ep1_out_buf[0] = command;
- return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
- dev->ep1_out_buf, len+1, &actual_len, 200);
-}
-
-int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
- int rate, int depth, int bpp)
-{
- int ret;
- char tmp[5];
-
- switch (rate) {
- case 44100: tmp[0] = SAMPLERATE_44100; break;
- case 48000: tmp[0] = SAMPLERATE_48000; break;
- case 88200: tmp[0] = SAMPLERATE_88200; break;
- case 96000: tmp[0] = SAMPLERATE_96000; break;
- case 192000: tmp[0] = SAMPLERATE_192000; break;
- default: return -EINVAL;
- }
-
- switch (depth) {
- case 16: tmp[1] = DEPTH_16; break;
- case 24: tmp[1] = DEPTH_24; break;
- default: return -EINVAL;
- }
-
- tmp[2] = bpp & 0xff;
- tmp[3] = bpp >> 8;
- tmp[4] = 1; /* packets per microframe */
-
- debug("setting audio params: %d Hz, %d bits, %d bpp\n",
- rate, depth, bpp);
-
- dev->audio_parm_answer = -1;
- ret = snd_usb_caiaq_send_command(dev, EP1_CMD_AUDIO_PARAMS,
- tmp, sizeof(tmp));
-
- if (ret)
- return ret;
-
- if (!wait_event_timeout(dev->ep1_wait_queue,
- dev->audio_parm_answer >= 0, HZ))
- return -EPIPE;
-
- if (dev->audio_parm_answer != 1)
- debug("unable to set the device's audio params\n");
- else
- dev->bpp = bpp;
-
- return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
-}
-
-int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev,
- int digital, int analog, int erp)
-{
- char tmp[3] = { digital, analog, erp };
- return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
- tmp, sizeof(tmp));
-}
-
-static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
-{
- int ret;
- char val[4];
-
- /* device-specific startup specials */
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
- /* RigKontrol2 - display centered dash ('-') */
- val[0] = 0x00;
- val[1] = 0x00;
- val[2] = 0x01;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- /* RigKontrol2 - display two centered dashes ('--') */
- val[0] = 0x00;
- val[1] = 0x40;
- val[2] = 0x40;
- val[3] = 0x00;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- /* Audio Kontrol 1 - make USB-LED stop blinking */
- val[0] = 0x00;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
- /* Audio 8 DJ - trigger read of current settings */
- dev->control_state[0] = 0xff;
- snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0);
- snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0);
-
- if (!wait_event_timeout(dev->ep1_wait_queue,
- dev->control_state[0] != 0xff, HZ))
- return;
-
- /* fix up some defaults */
- if ((dev->control_state[1] != 2) ||
- (dev->control_state[2] != 3) ||
- (dev->control_state[4] != 2)) {
- dev->control_state[1] = 2;
- dev->control_state[2] = 3;
- dev->control_state[4] = 2;
- snd_usb_caiaq_send_command(dev,
- EP1_CMD_WRITE_IO, dev->control_state, 6);
- }
-
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
- /* Audio 4 DJ - default input mode to phono */
- dev->control_state[0] = 2;
- snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
- dev->control_state, 1);
- break;
- }
-
- if (dev->spec.num_analog_audio_out +
- dev->spec.num_analog_audio_in +
- dev->spec.num_digital_audio_out +
- dev->spec.num_digital_audio_in > 0) {
- ret = snd_usb_caiaq_audio_init(dev);
- if (ret < 0)
- log("Unable to set up audio system (ret=%d)\n", ret);
- }
-
- if (dev->spec.num_midi_in +
- dev->spec.num_midi_out > 0) {
- ret = snd_usb_caiaq_midi_init(dev);
- if (ret < 0)
- log("Unable to set up MIDI system (ret=%d)\n", ret);
- }
-
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
- ret = snd_usb_caiaq_input_init(dev);
- if (ret < 0)
- log("Unable to set up input system (ret=%d)\n", ret);
-#endif
-
- /* finally, register the card and all its sub-instances */
- ret = snd_card_register(dev->chip.card);
- if (ret < 0) {
- log("snd_card_register() returned %d\n", ret);
- snd_card_free(dev->chip.card);
- }
-
- ret = snd_usb_caiaq_control_init(dev);
- if (ret < 0)
- log("Unable to set up control system (ret=%d)\n", ret);
-}
-
-static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
-{
- int devnum;
- int err;
- struct snd_card *card;
- struct snd_usb_caiaqdev *dev;
-
- for (devnum = 0; devnum < SNDRV_CARDS; devnum++)
- if (enable[devnum] && !snd_card_used[devnum])
- break;
-
- if (devnum >= SNDRV_CARDS)
- return -ENODEV;
-
- err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
- sizeof(struct snd_usb_caiaqdev), &card);
- if (err < 0)
- return err;
-
- dev = caiaqdev(card);
- dev->chip.dev = usb_dev;
- dev->chip.card = card;
- dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct));
- spin_lock_init(&dev->spinlock);
- snd_card_set_dev(card, &usb_dev->dev);
-
- *cardp = card;
- return 0;
-}
-
-static int __devinit init_card(struct snd_usb_caiaqdev *dev)
-{
- char *c;
- struct usb_device *usb_dev = dev->chip.dev;
- struct snd_card *card = dev->chip.card;
- int err, len;
-
- if (usb_set_interface(usb_dev, 0, 1) != 0) {
- log("can't set alt interface.\n");
- return -EIO;
- }
-
- usb_init_urb(&dev->ep1_in_urb);
- usb_init_urb(&dev->midi_out_urb);
-
- usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
- usb_rcvbulkpipe(usb_dev, 0x1),
- dev->ep1_in_buf, EP1_BUFSIZE,
- usb_ep1_command_reply_dispatch, dev);
-
- usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
- usb_sndbulkpipe(usb_dev, 0x1),
- dev->midi_out_buf, EP1_BUFSIZE,
- snd_usb_caiaq_midi_output_done, dev);
-
- init_waitqueue_head(&dev->ep1_wait_queue);
- init_waitqueue_head(&dev->prepare_wait_queue);
-
- if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
- return -EIO;
-
- err = snd_usb_caiaq_send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
- if (err)
- return err;
-
- if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ))
- return -ENODEV;
-
- usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
- dev->vendor_name, CAIAQ_USB_STR_LEN);
-
- usb_string(usb_dev, usb_dev->descriptor.iProduct,
- dev->product_name, CAIAQ_USB_STR_LEN);
-
- usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
- dev->serial, CAIAQ_USB_STR_LEN);
-
- /* terminate serial string at first white space occurence */
- c = strchr(dev->serial, ' ');
- if (c)
- *c = '\0';
-
- strcpy(card->driver, MODNAME);
- strcpy(card->shortname, dev->product_name);
-
- len = snprintf(card->longname, sizeof(card->longname),
- "%s %s (serial %s, ",
- dev->vendor_name, dev->product_name, dev->serial);
-
- if (len < sizeof(card->longname) - 2)
- len += usb_make_path(usb_dev, card->longname + len,
- sizeof(card->longname) - len);
-
- card->longname[len++] = ')';
- card->longname[len] = '\0';
- setup_card(dev);
- return 0;
-}
-
-static int __devinit snd_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- int ret;
- struct snd_card *card;
- struct usb_device *device = interface_to_usbdev(intf);
-
- ret = create_card(device, &card);
-
- if (ret < 0)
- return ret;
-
- usb_set_intfdata(intf, card);
- ret = init_card(caiaqdev(card));
- if (ret < 0) {
- log("unable to init card! (ret=%d)\n", ret);
- snd_card_free(card);
- return ret;
- }
-
- return 0;
-}
-
-static void snd_disconnect(struct usb_interface *intf)
-{
- struct snd_usb_caiaqdev *dev;
- struct snd_card *card = usb_get_intfdata(intf);
-
- debug("%s(%p)\n", __func__, intf);
-
- if (!card)
- return;
-
- dev = caiaqdev(card);
- snd_card_disconnect(card);
-
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
- snd_usb_caiaq_input_free(dev);
-#endif
- snd_usb_caiaq_audio_free(dev);
-
- usb_kill_urb(&dev->ep1_in_urb);
- usb_kill_urb(&dev->midi_out_urb);
-
- snd_card_free(card);
- usb_reset_device(interface_to_usbdev(intf));
-}
-
-
-MODULE_DEVICE_TABLE(usb, snd_usb_id_table);
-static struct usb_driver snd_usb_driver = {
- .name = MODNAME,
- .probe = snd_probe,
- .disconnect = snd_disconnect,
- .id_table = snd_usb_id_table,
-};
-
-static int __init snd_module_init(void)
-{
- return usb_register(&snd_usb_driver);
-}
-
-static void __exit snd_module_exit(void)
-{
- usb_deregister(&snd_usb_driver);
-}
-
-module_init(snd_module_init)
-module_exit(snd_module_exit)
-
+++ /dev/null
-#ifndef CAIAQ_DEVICE_H
-#define CAIAQ_DEVICE_H
-
-#include "../usbaudio.h"
-
-#define USB_VID_NATIVEINSTRUMENTS 0x17cc
-
-#define USB_PID_RIGKONTROL2 0x1969
-#define USB_PID_RIGKONTROL3 0x1940
-#define USB_PID_KORECONTROLLER 0x4711
-#define USB_PID_KORECONTROLLER2 0x4712
-#define USB_PID_AK1 0x0815
-#define USB_PID_AUDIO4DJ 0x0839
-#define USB_PID_AUDIO8DJ 0x1978
-#define USB_PID_SESSIONIO 0x1915
-#define USB_PID_GUITARRIGMOBILE 0x0d8d
-
-#define EP1_BUFSIZE 64
-#define CAIAQ_USB_STR_LEN 0xff
-#define MAX_STREAMS 32
-
-//#define SND_USB_CAIAQ_DEBUG
-
-#define MODNAME "snd-usb-caiaq"
-#define log(x...) snd_printk(KERN_WARNING MODNAME" log: " x)
-
-#ifdef SND_USB_CAIAQ_DEBUG
-#define debug(x...) snd_printk(KERN_WARNING MODNAME " debug: " x)
-#else
-#define debug(x...) do { } while(0)
-#endif
-
-#define EP1_CMD_GET_DEVICE_INFO 0x1
-#define EP1_CMD_READ_ERP 0x2
-#define EP1_CMD_READ_ANALOG 0x3
-#define EP1_CMD_READ_IO 0x4
-#define EP1_CMD_WRITE_IO 0x5
-#define EP1_CMD_MIDI_READ 0x6
-#define EP1_CMD_MIDI_WRITE 0x7
-#define EP1_CMD_AUDIO_PARAMS 0x9
-#define EP1_CMD_AUTO_MSG 0xb
-#define EP1_CMD_DIMM_LEDS 0xc
-
-struct caiaq_device_spec {
- unsigned short fw_version;
- unsigned char hw_subtype;
- unsigned char num_erp;
- unsigned char num_analog_in;
- unsigned char num_digital_in;
- unsigned char num_digital_out;
- unsigned char num_analog_audio_out;
- unsigned char num_analog_audio_in;
- unsigned char num_digital_audio_out;
- unsigned char num_digital_audio_in;
- unsigned char num_midi_out;
- unsigned char num_midi_in;
- unsigned char data_alignment;
-} __attribute__ ((packed));
-
-struct snd_usb_caiaq_cb_info;
-
-struct snd_usb_caiaqdev {
- struct snd_usb_audio chip;
-
- struct urb ep1_in_urb;
- struct urb midi_out_urb;
- struct urb **data_urbs_in;
- struct urb **data_urbs_out;
- struct snd_usb_caiaq_cb_info *data_cb_info;
-
- unsigned char ep1_in_buf[EP1_BUFSIZE];
- unsigned char ep1_out_buf[EP1_BUFSIZE];
- unsigned char midi_out_buf[EP1_BUFSIZE];
-
- struct caiaq_device_spec spec;
- spinlock_t spinlock;
- wait_queue_head_t ep1_wait_queue;
- wait_queue_head_t prepare_wait_queue;
- int spec_received, audio_parm_answer;
- int midi_out_active;
-
- char vendor_name[CAIAQ_USB_STR_LEN];
- char product_name[CAIAQ_USB_STR_LEN];
- char serial[CAIAQ_USB_STR_LEN];
-
- int n_streams, n_audio_in, n_audio_out;
- int streaming, first_packet, output_running;
- int audio_in_buf_pos[MAX_STREAMS];
- int audio_out_buf_pos[MAX_STREAMS];
- int period_in_count[MAX_STREAMS];
- int period_out_count[MAX_STREAMS];
- int input_panic, output_panic, warned;
- char *audio_in_buf, *audio_out_buf;
- unsigned int samplerates, bpp;
-
- struct snd_pcm_substream *sub_playback[MAX_STREAMS];
- struct snd_pcm_substream *sub_capture[MAX_STREAMS];
-
- /* Controls */
- unsigned char control_state[64];
-
- /* Linux input */
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
- struct input_dev *input_dev;
- char phys[64]; /* physical device path */
- unsigned short keycode[64];
-#endif
-
- /* ALSA */
- struct snd_pcm *pcm;
- struct snd_pcm_hardware pcm_info;
- struct snd_rawmidi *rmidi;
- struct snd_rawmidi_substream *midi_receive_substream;
- struct snd_rawmidi_substream *midi_out_substream;
-};
-
-struct snd_usb_caiaq_cb_info {
- struct snd_usb_caiaqdev *dev;
- int index;
-};
-
-#define caiaqdev(c) ((struct snd_usb_caiaqdev*)(c)->private_data)
-
-int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, int rate, int depth, int bbp);
-int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, int digital, int analog, int erp);
-int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
- unsigned char command,
- const unsigned char *buffer,
- int len);
-
-#endif /* CAIAQ_DEVICE_H */
+++ /dev/null
-/*
- * Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/rawmidi.h>
-#include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-input.h"
-
-static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A };
-static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
- KEY_5, KEY_6, KEY_7 };
-static unsigned short keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4,
- KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 };
-
-static unsigned short keycode_kore[] = {
- KEY_FN_F1, /* "menu" */
- KEY_FN_F7, /* "lcd backlight */
- KEY_FN_F2, /* "control" */
- KEY_FN_F3, /* "enter" */
- KEY_FN_F4, /* "view" */
- KEY_FN_F5, /* "esc" */
- KEY_FN_F6, /* "sound" */
- KEY_FN_F8, /* array spacer, never triggered. */
- KEY_RIGHT,
- KEY_DOWN,
- KEY_UP,
- KEY_LEFT,
- KEY_SOUND, /* "listen" */
- KEY_RECORD,
- KEY_PLAYPAUSE,
- KEY_STOP,
- BTN_4, /* 8 softkeys */
- BTN_3,
- BTN_2,
- BTN_1,
- BTN_8,
- BTN_7,
- BTN_6,
- BTN_5,
- KEY_BRL_DOT4, /* touch sensitive knobs */
- KEY_BRL_DOT3,
- KEY_BRL_DOT2,
- KEY_BRL_DOT1,
- KEY_BRL_DOT8,
- KEY_BRL_DOT7,
- KEY_BRL_DOT6,
- KEY_BRL_DOT5
-};
-
-#define DEG90 (range / 2)
-#define DEG180 (range)
-#define DEG270 (DEG90 + DEG180)
-#define DEG360 (DEG180 * 2)
-#define HIGH_PEAK (268)
-#define LOW_PEAK (-7)
-
-/* some of these devices have endless rotation potentiometers
- * built in which use two tapers, 90 degrees phase shifted.
- * this algorithm decodes them to one single value, ranging
- * from 0 to 999 */
-static unsigned int decode_erp(unsigned char a, unsigned char b)
-{
- int weight_a, weight_b;
- int pos_a, pos_b;
- int ret;
- int range = HIGH_PEAK - LOW_PEAK;
- int mid_value = (HIGH_PEAK + LOW_PEAK) / 2;
-
- weight_b = abs(mid_value - a) - (range / 2 - 100) / 2;
-
- if (weight_b < 0)
- weight_b = 0;
-
- if (weight_b > 100)
- weight_b = 100;
-
- weight_a = 100 - weight_b;
-
- if (a < mid_value) {
- /* 0..90 and 270..360 degrees */
- pos_b = b - LOW_PEAK + DEG270;
- if (pos_b >= DEG360)
- pos_b -= DEG360;
- } else
- /* 90..270 degrees */
- pos_b = HIGH_PEAK - b + DEG90;
-
-
- if (b > mid_value)
- /* 0..180 degrees */
- pos_a = a - LOW_PEAK;
- else
- /* 180..360 degrees */
- pos_a = HIGH_PEAK - a + DEG180;
-
- /* interpolate both slider values, depending on weight factors */
- /* 0..99 x DEG360 */
- ret = pos_a * weight_a + pos_b * weight_b;
-
- /* normalize to 0..999 */
- ret *= 10;
- ret /= DEG360;
-
- if (ret < 0)
- ret += 1000;
-
- if (ret >= 1000)
- ret -= 1000;
-
- return ret;
-}
-
-#undef DEG90
-#undef DEG180
-#undef DEG270
-#undef DEG360
-#undef HIGH_PEAK
-#undef LOW_PEAK
-
-
-static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev,
- const unsigned char *buf,
- unsigned int len)
-{
- struct input_dev *input_dev = dev->input_dev;
-
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
- input_report_abs(input_dev, ABS_X, (buf[4] << 8) | buf[5]);
- input_report_abs(input_dev, ABS_Y, (buf[0] << 8) | buf[1]);
- input_report_abs(input_dev, ABS_Z, (buf[2] << 8) | buf[3]);
- input_sync(input_dev);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]);
- input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]);
- input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]);
- input_sync(input_dev);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
- input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]);
- input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]);
- input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]);
- input_sync(input_dev);
- break;
- }
-}
-
-static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
- const char *buf, unsigned int len)
-{
- struct input_dev *input_dev = dev->input_dev;
- int i;
-
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- i = decode_erp(buf[0], buf[1]);
- input_report_abs(input_dev, ABS_X, i);
- input_sync(input_dev);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
- i = decode_erp(buf[7], buf[5]);
- input_report_abs(input_dev, ABS_HAT0X, i);
- i = decode_erp(buf[12], buf[14]);
- input_report_abs(input_dev, ABS_HAT0Y, i);
- i = decode_erp(buf[15], buf[13]);
- input_report_abs(input_dev, ABS_HAT1X, i);
- i = decode_erp(buf[0], buf[2]);
- input_report_abs(input_dev, ABS_HAT1Y, i);
- i = decode_erp(buf[3], buf[1]);
- input_report_abs(input_dev, ABS_HAT2X, i);
- i = decode_erp(buf[8], buf[10]);
- input_report_abs(input_dev, ABS_HAT2Y, i);
- i = decode_erp(buf[11], buf[9]);
- input_report_abs(input_dev, ABS_HAT3X, i);
- i = decode_erp(buf[4], buf[6]);
- input_report_abs(input_dev, ABS_HAT3Y, i);
- input_sync(input_dev);
- break;
- }
-}
-
-static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev,
- char *buf, unsigned int len)
-{
- struct input_dev *input_dev = dev->input_dev;
- unsigned short *keycode = input_dev->keycode;
- int i;
-
- if (!keycode)
- return;
-
- if (input_dev->id.product == USB_PID_RIGKONTROL2)
- for (i = 0; i < len; i++)
- buf[i] = ~buf[i];
-
- for (i = 0; i < input_dev->keycodemax && i < len * 8; i++)
- input_report_key(input_dev, keycode[i],
- buf[i / 8] & (1 << (i % 8)));
-
- if (dev->chip.usb_id ==
- USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER) ||
- dev->chip.usb_id ==
- USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2))
- input_report_abs(dev->input_dev, ABS_MISC, 255 - buf[4]);
-
- input_sync(input_dev);
-}
-
-void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev,
- char *buf,
- unsigned int len)
-{
- if (!dev->input_dev || len < 1)
- return;
-
- switch (buf[0]) {
- case EP1_CMD_READ_ANALOG:
- snd_caiaq_input_read_analog(dev, buf + 1, len - 1);
- break;
- case EP1_CMD_READ_ERP:
- snd_caiaq_input_read_erp(dev, buf + 1, len - 1);
- break;
- case EP1_CMD_READ_IO:
- snd_caiaq_input_read_io(dev, buf + 1, len - 1);
- break;
- }
-}
-
-int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
-{
- struct usb_device *usb_dev = dev->chip.dev;
- struct input_dev *input;
- int i, ret;
-
- input = input_allocate_device();
- if (!input)
- return -ENOMEM;
-
- usb_make_path(usb_dev, dev->phys, sizeof(dev->phys));
- strlcat(dev->phys, "/input0", sizeof(dev->phys));
-
- input->name = dev->product_name;
- input->phys = dev->phys;
- usb_to_input_id(usb_dev, &input->id);
- input->dev.parent = &usb_dev->dev;
-
- switch (dev->chip.usb_id) {
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
- input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
- BIT_MASK(ABS_Z);
- BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk2));
- memcpy(dev->keycode, keycode_rk2, sizeof(keycode_rk2));
- input->keycodemax = ARRAY_SIZE(keycode_rk2);
- input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
- input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
- input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
- snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
- BIT_MASK(ABS_Z);
- BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk3));
- memcpy(dev->keycode, keycode_rk3, sizeof(keycode_rk3));
- input->keycodemax = ARRAY_SIZE(keycode_rk3);
- input_set_abs_params(input, ABS_X, 0, 1024, 0, 10);
- input_set_abs_params(input, ABS_Y, 0, 1024, 0, 10);
- input_set_abs_params(input, ABS_Z, 0, 1024, 0, 10);
- snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->absbit[0] = BIT_MASK(ABS_X);
- BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_ak1));
- memcpy(dev->keycode, keycode_ak1, sizeof(keycode_ak1));
- input->keycodemax = ARRAY_SIZE(keycode_ak1);
- input_set_abs_params(input, ABS_X, 0, 999, 0, 10);
- snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5);
- break;
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
- case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
- input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
- input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) |
- BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) |
- BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) |
- BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) |
- BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
- BIT_MASK(ABS_Z);
- input->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
- BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_kore));
- memcpy(dev->keycode, keycode_kore, sizeof(keycode_kore));
- input->keycodemax = ARRAY_SIZE(keycode_kore);
- input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10);
- input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
- input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
- input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
- input_set_abs_params(input, ABS_MISC, 0, 255, 0, 1);
- snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5);
- break;
- default:
- /* no input methods supported on this device */
- input_free_device(input);
- return 0;
- }
-
- input->keycode = dev->keycode;
- input->keycodesize = sizeof(unsigned short);
- for (i = 0; i < input->keycodemax; i++)
- __set_bit(dev->keycode[i], input->keybit);
-
- ret = input_register_device(input);
- if (ret < 0) {
- input_free_device(input);
- return ret;
- }
-
- dev->input_dev = input;
- return 0;
-}
-
-void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
-{
- if (!dev || !dev->input_dev)
- return;
-
- input_unregister_device(dev->input_dev);
- dev->input_dev = NULL;
-}
-
+++ /dev/null
-#ifndef CAIAQ_INPUT_H
-#define CAIAQ_INPUT_H
-
-void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, char *buf, unsigned int len);
-int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev);
-void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2006,2007 Daniel Mack
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/rawmidi.h>
-#include <sound/pcm.h>
-
-#include "caiaq-device.h"
-#include "caiaq-midi.h"
-
-
-static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
-{
- return 0;
-}
-
-static int snd_usb_caiaq_midi_input_close(struct snd_rawmidi_substream *substream)
-{
- return 0;
-}
-
-static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
-{
- struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
-
- if (!dev)
- return;
-
- dev->midi_receive_substream = up ? substream : NULL;
-}
-
-
-static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substream)
-{
- return 0;
-}
-
-static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream)
-{
- struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
- if (dev->midi_out_active) {
- usb_kill_urb(&dev->midi_out_urb);
- dev->midi_out_active = 0;
- }
- return 0;
-}
-
-static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
- struct snd_rawmidi_substream *substream)
-{
- int len, ret;
-
- dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
- dev->midi_out_buf[1] = 0; /* port */
- len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
- EP1_BUFSIZE - 3);
-
- if (len <= 0)
- return;
-
- dev->midi_out_buf[2] = len;
- dev->midi_out_urb.transfer_buffer_length = len+3;
-
- ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
- if (ret < 0)
- log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
- "ret=%d, len=%d\n",
- substream, ret, len);
- else
- dev->midi_out_active = 1;
-}
-
-static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
-{
- struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
-
- if (up) {
- dev->midi_out_substream = substream;
- if (!dev->midi_out_active)
- snd_usb_caiaq_midi_send(dev, substream);
- } else {
- dev->midi_out_substream = NULL;
- }
-}
-
-
-static struct snd_rawmidi_ops snd_usb_caiaq_midi_output =
-{
- .open = snd_usb_caiaq_midi_output_open,
- .close = snd_usb_caiaq_midi_output_close,
- .trigger = snd_usb_caiaq_midi_output_trigger,
-};
-
-static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
-{
- .open = snd_usb_caiaq_midi_input_open,
- .close = snd_usb_caiaq_midi_input_close,
- .trigger = snd_usb_caiaq_midi_input_trigger,
-};
-
-void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
- int port, const char *buf, int len)
-{
- if (!dev->midi_receive_substream)
- return;
-
- snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
-}
-
-int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
-{
- int ret;
- struct snd_rawmidi *rmidi;
-
- ret = snd_rawmidi_new(device->chip.card, device->product_name, 0,
- device->spec.num_midi_out,
- device->spec.num_midi_in,
- &rmidi);
-
- if (ret < 0)
- return ret;
-
- strcpy(rmidi->name, device->product_name);
-
- rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
- rmidi->private_data = device;
-
- if (device->spec.num_midi_out > 0) {
- rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
- snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
- &snd_usb_caiaq_midi_output);
- }
-
- if (device->spec.num_midi_in > 0) {
- rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
- snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
- &snd_usb_caiaq_midi_input);
- }
-
- device->rmidi = rmidi;
-
- return 0;
-}
-
-void snd_usb_caiaq_midi_output_done(struct urb* urb)
-{
- struct snd_usb_caiaqdev *dev = urb->context;
-
- dev->midi_out_active = 0;
- if (urb->status != 0)
- return;
-
- if (!dev->midi_out_substream)
- return;
-
- snd_usb_caiaq_midi_send(dev, dev->midi_out_substream);
-}
-
+++ /dev/null
-#ifndef CAIAQ_MIDI_H
-#define CAIAQ_MIDI_H
-
-int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
-void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
-void snd_usb_caiaq_midi_output_done(struct urb* urb);
-
-#endif /* CAIAQ_MIDI_H */
--- /dev/null
+/*
+ * Copyright (c) 2007 Daniel Mack
+ * friendly supported by NI.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <sound/control.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "device.h"
+#include "control.h"
+
+#define CNT_INTVAL 0x10000
+
+static int control_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol);
+ struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
+ int pos = kcontrol->private_value;
+ int is_intval = pos & CNT_INTVAL;
+ unsigned int id = dev->chip.usb_id;
+
+ uinfo->count = 1;
+ pos &= ~CNT_INTVAL;
+
+ if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)
+ && (pos == 0)) {
+ /* current input mode of A8DJ */
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 2;
+ return 0;
+ }
+
+ if (id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)
+ && (pos == 0)) {
+ /* current input mode of A4DJ */
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+ }
+
+ if (is_intval) {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 64;
+ } else {
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ }
+
+ return 0;
+}
+
+static int control_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol);
+ struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
+ int pos = kcontrol->private_value;
+
+ if (dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
+ /* A4DJ has only one control */
+ /* do not expose hardware input mode 0 */
+ ucontrol->value.integer.value[0] = dev->control_state[0] - 1;
+ return 0;
+ }
+
+ if (pos & CNT_INTVAL)
+ ucontrol->value.integer.value[0]
+ = dev->control_state[pos & ~CNT_INTVAL];
+ else
+ ucontrol->value.integer.value[0]
+ = !!(dev->control_state[pos / 8] & (1 << pos % 8));
+
+ return 0;
+}
+
+static int control_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_usb_audio *chip = snd_kcontrol_chip(kcontrol);
+ struct snd_usb_caiaqdev *dev = caiaqdev(chip->card);
+ int pos = kcontrol->private_value;
+
+ if (dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ)) {
+ /* A4DJ has only one control */
+ /* do not expose hardware input mode 0 */
+ dev->control_state[0] = ucontrol->value.integer.value[0] + 1;
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
+ dev->control_state, sizeof(dev->control_state));
+ return 1;
+ }
+
+ if (pos & CNT_INTVAL) {
+ dev->control_state[pos & ~CNT_INTVAL]
+ = ucontrol->value.integer.value[0];
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
+ dev->control_state, sizeof(dev->control_state));
+ } else {
+ if (ucontrol->value.integer.value[0])
+ dev->control_state[pos / 8] |= 1 << (pos % 8);
+ else
+ dev->control_state[pos / 8] &= ~(1 << (pos % 8));
+
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
+ dev->control_state, sizeof(dev->control_state));
+ }
+
+ return 1;
+}
+
+static struct snd_kcontrol_new kcontrol_template __devinitdata = {
+ .iface = SNDRV_CTL_ELEM_IFACE_HWDEP,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
+ .index = 0,
+ .info = control_info,
+ .get = control_get,
+ .put = control_put,
+ /* name and private_value filled later */
+};
+
+struct caiaq_controller {
+ char *name;
+ int index;
+};
+
+static struct caiaq_controller ak1_controller[] = {
+ { "LED left", 2 },
+ { "LED middle", 1 },
+ { "LED right", 0 },
+ { "LED ring", 3 }
+};
+
+static struct caiaq_controller rk2_controller[] = {
+ { "LED 1", 5 },
+ { "LED 2", 4 },
+ { "LED 3", 3 },
+ { "LED 4", 2 },
+ { "LED 5", 1 },
+ { "LED 6", 0 },
+ { "LED pedal", 6 },
+ { "LED 7seg_1b", 8 },
+ { "LED 7seg_1c", 9 },
+ { "LED 7seg_2a", 10 },
+ { "LED 7seg_2b", 11 },
+ { "LED 7seg_2c", 12 },
+ { "LED 7seg_2d", 13 },
+ { "LED 7seg_2e", 14 },
+ { "LED 7seg_2f", 15 },
+ { "LED 7seg_2g", 16 },
+ { "LED 7seg_3a", 17 },
+ { "LED 7seg_3b", 18 },
+ { "LED 7seg_3c", 19 },
+ { "LED 7seg_3d", 20 },
+ { "LED 7seg_3e", 21 },
+ { "LED 7seg_3f", 22 },
+ { "LED 7seg_3g", 23 }
+};
+
+static struct caiaq_controller rk3_controller[] = {
+ { "LED 7seg_1a", 0 + 0 },
+ { "LED 7seg_1b", 0 + 1 },
+ { "LED 7seg_1c", 0 + 2 },
+ { "LED 7seg_1d", 0 + 3 },
+ { "LED 7seg_1e", 0 + 4 },
+ { "LED 7seg_1f", 0 + 5 },
+ { "LED 7seg_1g", 0 + 6 },
+ { "LED 7seg_1p", 0 + 7 },
+
+ { "LED 7seg_2a", 8 + 0 },
+ { "LED 7seg_2b", 8 + 1 },
+ { "LED 7seg_2c", 8 + 2 },
+ { "LED 7seg_2d", 8 + 3 },
+ { "LED 7seg_2e", 8 + 4 },
+ { "LED 7seg_2f", 8 + 5 },
+ { "LED 7seg_2g", 8 + 6 },
+ { "LED 7seg_2p", 8 + 7 },
+
+ { "LED 7seg_3a", 16 + 0 },
+ { "LED 7seg_3b", 16 + 1 },
+ { "LED 7seg_3c", 16 + 2 },
+ { "LED 7seg_3d", 16 + 3 },
+ { "LED 7seg_3e", 16 + 4 },
+ { "LED 7seg_3f", 16 + 5 },
+ { "LED 7seg_3g", 16 + 6 },
+ { "LED 7seg_3p", 16 + 7 },
+
+ { "LED 7seg_4a", 24 + 0 },
+ { "LED 7seg_4b", 24 + 1 },
+ { "LED 7seg_4c", 24 + 2 },
+ { "LED 7seg_4d", 24 + 3 },
+ { "LED 7seg_4e", 24 + 4 },
+ { "LED 7seg_4f", 24 + 5 },
+ { "LED 7seg_4g", 24 + 6 },
+ { "LED 7seg_4p", 24 + 7 },
+
+ { "LED 1", 32 + 0 },
+ { "LED 2", 32 + 1 },
+ { "LED 3", 32 + 2 },
+ { "LED 4", 32 + 3 },
+ { "LED 5", 32 + 4 },
+ { "LED 6", 32 + 5 },
+ { "LED 7", 32 + 6 },
+ { "LED 8", 32 + 7 },
+ { "LED pedal", 32 + 8 }
+};
+
+static struct caiaq_controller kore_controller[] = {
+ { "LED F1", 8 | CNT_INTVAL },
+ { "LED F2", 12 | CNT_INTVAL },
+ { "LED F3", 0 | CNT_INTVAL },
+ { "LED F4", 4 | CNT_INTVAL },
+ { "LED F5", 11 | CNT_INTVAL },
+ { "LED F6", 15 | CNT_INTVAL },
+ { "LED F7", 3 | CNT_INTVAL },
+ { "LED F8", 7 | CNT_INTVAL },
+ { "LED touch1", 10 | CNT_INTVAL },
+ { "LED touch2", 14 | CNT_INTVAL },
+ { "LED touch3", 2 | CNT_INTVAL },
+ { "LED touch4", 6 | CNT_INTVAL },
+ { "LED touch5", 9 | CNT_INTVAL },
+ { "LED touch6", 13 | CNT_INTVAL },
+ { "LED touch7", 1 | CNT_INTVAL },
+ { "LED touch8", 5 | CNT_INTVAL },
+ { "LED left", 18 | CNT_INTVAL },
+ { "LED right", 22 | CNT_INTVAL },
+ { "LED up", 16 | CNT_INTVAL },
+ { "LED down", 20 | CNT_INTVAL },
+ { "LED stop", 23 | CNT_INTVAL },
+ { "LED play", 21 | CNT_INTVAL },
+ { "LED record", 19 | CNT_INTVAL },
+ { "LED listen", 17 | CNT_INTVAL },
+ { "LED lcd", 30 | CNT_INTVAL },
+ { "LED menu", 28 | CNT_INTVAL },
+ { "LED sound", 31 | CNT_INTVAL },
+ { "LED esc", 29 | CNT_INTVAL },
+ { "LED view", 27 | CNT_INTVAL },
+ { "LED enter", 24 | CNT_INTVAL },
+ { "LED control", 26 | CNT_INTVAL }
+};
+
+static struct caiaq_controller a8dj_controller[] = {
+ { "Current input mode", 0 | CNT_INTVAL },
+ { "GND lift for TC Vinyl mode", 24 + 0 },
+ { "GND lift for TC CD/Line mode", 24 + 1 },
+ { "GND lift for phono mode", 24 + 2 },
+ { "Software lock", 40 }
+};
+
+static struct caiaq_controller a4dj_controller[] = {
+ { "Current input mode", 0 | CNT_INTVAL }
+};
+
+static int __devinit add_controls(struct caiaq_controller *c, int num,
+ struct snd_usb_caiaqdev *dev)
+{
+ int i, ret;
+ struct snd_kcontrol *kc;
+
+ for (i = 0; i < num; i++, c++) {
+ kcontrol_template.name = c->name;
+ kcontrol_template.private_value = c->index;
+ kc = snd_ctl_new1(&kcontrol_template, dev);
+ ret = snd_ctl_add(dev->chip.card, kc);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
+{
+ int ret = 0;
+
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ ret = add_controls(ak1_controller,
+ ARRAY_SIZE(ak1_controller), dev);
+ break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+ ret = add_controls(rk2_controller,
+ ARRAY_SIZE(rk2_controller), dev);
+ break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
+ ret = add_controls(rk3_controller,
+ ARRAY_SIZE(rk3_controller), dev);
+ break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
+ ret = add_controls(kore_controller,
+ ARRAY_SIZE(kore_controller), dev);
+ break;
+
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+ ret = add_controls(a8dj_controller,
+ ARRAY_SIZE(a8dj_controller), dev);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
+ ret = add_controls(a4dj_controller,
+ ARRAY_SIZE(a4dj_controller), dev);
+ break;
+ }
+
+ return ret;
+}
+
--- /dev/null
+#ifndef CAIAQ_CONTROL_H
+#define CAIAQ_CONTROL_H
+
+int snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev);
+
+#endif /* CAIAQ_CONTROL_H */
--- /dev/null
+/*
+ * caiaq.c: ALSA driver for caiaq/NativeInstruments devices
+ *
+ * Copyright (c) 2007 Daniel Mack <daniel@caiaq.de>
+ * Karsten Wiese <fzu@wemgehoertderstaat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <sound/initval.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "device.h"
+#include "audio.h"
+#include "midi.h"
+#include "control.h"
+#include "input.h"
+
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
+ "{Native Instruments, RigKontrol3},"
+ "{Native Instruments, Kore Controller},"
+ "{Native Instruments, Kore Controller 2},"
+ "{Native Instruments, Audio Kontrol 1},"
+ "{Native Instruments, Audio 4 DJ},"
+ "{Native Instruments, Audio 8 DJ},"
+ "{Native Instruments, Session I/O},"
+ "{Native Instruments, GuitarRig mobile}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
+static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for this card */
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
+static int snd_card_used[SNDRV_CARDS];
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for the caiaq sound device");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for the caiaq soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable the caiaq soundcard.");
+
+enum {
+ SAMPLERATE_44100 = 0,
+ SAMPLERATE_48000 = 1,
+ SAMPLERATE_96000 = 2,
+ SAMPLERATE_192000 = 3,
+ SAMPLERATE_88200 = 4,
+ SAMPLERATE_INVALID = 0xff
+};
+
+enum {
+ DEPTH_NONE = 0,
+ DEPTH_16 = 1,
+ DEPTH_24 = 2,
+ DEPTH_32 = 3
+};
+
+static struct usb_device_id snd_usb_id_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_RIGKONTROL2
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_RIGKONTROL3
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_KORECONTROLLER
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_KORECONTROLLER2
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AK1
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AUDIO8DJ
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_SESSIONIO
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_GUITARRIGMOBILE
+ },
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE,
+ .idVendor = USB_VID_NATIVEINSTRUMENTS,
+ .idProduct = USB_PID_AUDIO4DJ
+ },
+ { /* terminator */ }
+};
+
+static void usb_ep1_command_reply_dispatch (struct urb* urb)
+{
+ int ret;
+ struct snd_usb_caiaqdev *dev = urb->context;
+ unsigned char *buf = urb->transfer_buffer;
+
+ if (urb->status || !dev) {
+ log("received EP1 urb->status = %i\n", urb->status);
+ return;
+ }
+
+ switch(buf[0]) {
+ case EP1_CMD_GET_DEVICE_INFO:
+ memcpy(&dev->spec, buf+1, sizeof(struct caiaq_device_spec));
+ dev->spec.fw_version = le16_to_cpu(dev->spec.fw_version);
+ debug("device spec (firmware %d): audio: %d in, %d out, "
+ "MIDI: %d in, %d out, data alignment %d\n",
+ dev->spec.fw_version,
+ dev->spec.num_analog_audio_in,
+ dev->spec.num_analog_audio_out,
+ dev->spec.num_midi_in,
+ dev->spec.num_midi_out,
+ dev->spec.data_alignment);
+
+ dev->spec_received++;
+ wake_up(&dev->ep1_wait_queue);
+ break;
+ case EP1_CMD_AUDIO_PARAMS:
+ dev->audio_parm_answer = buf[1];
+ wake_up(&dev->ep1_wait_queue);
+ break;
+ case EP1_CMD_MIDI_READ:
+ snd_usb_caiaq_midi_handle_input(dev, buf[1], buf + 3, buf[2]);
+ break;
+ case EP1_CMD_READ_IO:
+ if (dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) {
+ if (urb->actual_length > sizeof(dev->control_state))
+ urb->actual_length = sizeof(dev->control_state);
+ memcpy(dev->control_state, buf + 1, urb->actual_length);
+ wake_up(&dev->ep1_wait_queue);
+ break;
+ }
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ case EP1_CMD_READ_ERP:
+ case EP1_CMD_READ_ANALOG:
+ snd_usb_caiaq_input_dispatch(dev, buf, urb->actual_length);
+#endif
+ break;
+ }
+
+ dev->ep1_in_urb.actual_length = 0;
+ ret = usb_submit_urb(&dev->ep1_in_urb, GFP_ATOMIC);
+ if (ret < 0)
+ log("unable to submit urb. OOM!?\n");
+}
+
+int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
+ unsigned char command,
+ const unsigned char *buffer,
+ int len)
+{
+ int actual_len;
+ struct usb_device *usb_dev = dev->chip.dev;
+
+ if (!usb_dev)
+ return -EIO;
+
+ if (len > EP1_BUFSIZE - 1)
+ len = EP1_BUFSIZE - 1;
+
+ if (buffer && len > 0)
+ memcpy(dev->ep1_out_buf+1, buffer, len);
+
+ dev->ep1_out_buf[0] = command;
+ return usb_bulk_msg(usb_dev, usb_sndbulkpipe(usb_dev, 1),
+ dev->ep1_out_buf, len+1, &actual_len, 200);
+}
+
+int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev,
+ int rate, int depth, int bpp)
+{
+ int ret;
+ char tmp[5];
+
+ switch (rate) {
+ case 44100: tmp[0] = SAMPLERATE_44100; break;
+ case 48000: tmp[0] = SAMPLERATE_48000; break;
+ case 88200: tmp[0] = SAMPLERATE_88200; break;
+ case 96000: tmp[0] = SAMPLERATE_96000; break;
+ case 192000: tmp[0] = SAMPLERATE_192000; break;
+ default: return -EINVAL;
+ }
+
+ switch (depth) {
+ case 16: tmp[1] = DEPTH_16; break;
+ case 24: tmp[1] = DEPTH_24; break;
+ default: return -EINVAL;
+ }
+
+ tmp[2] = bpp & 0xff;
+ tmp[3] = bpp >> 8;
+ tmp[4] = 1; /* packets per microframe */
+
+ debug("setting audio params: %d Hz, %d bits, %d bpp\n",
+ rate, depth, bpp);
+
+ dev->audio_parm_answer = -1;
+ ret = snd_usb_caiaq_send_command(dev, EP1_CMD_AUDIO_PARAMS,
+ tmp, sizeof(tmp));
+
+ if (ret)
+ return ret;
+
+ if (!wait_event_timeout(dev->ep1_wait_queue,
+ dev->audio_parm_answer >= 0, HZ))
+ return -EPIPE;
+
+ if (dev->audio_parm_answer != 1)
+ debug("unable to set the device's audio params\n");
+ else
+ dev->bpp = bpp;
+
+ return dev->audio_parm_answer == 1 ? 0 : -EINVAL;
+}
+
+int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev,
+ int digital, int analog, int erp)
+{
+ char tmp[3] = { digital, analog, erp };
+ return snd_usb_caiaq_send_command(dev, EP1_CMD_AUTO_MSG,
+ tmp, sizeof(tmp));
+}
+
+static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
+{
+ int ret;
+ char val[4];
+
+ /* device-specific startup specials */
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+ /* RigKontrol2 - display centered dash ('-') */
+ val[0] = 0x00;
+ val[1] = 0x00;
+ val[2] = 0x01;
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
+ /* RigKontrol2 - display two centered dashes ('--') */
+ val[0] = 0x00;
+ val[1] = 0x40;
+ val[2] = 0x40;
+ val[3] = 0x00;
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ /* Audio Kontrol 1 - make USB-LED stop blinking */
+ val[0] = 0x00;
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
+ /* Audio 8 DJ - trigger read of current settings */
+ dev->control_state[0] = 0xff;
+ snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0);
+ snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0);
+
+ if (!wait_event_timeout(dev->ep1_wait_queue,
+ dev->control_state[0] != 0xff, HZ))
+ return;
+
+ /* fix up some defaults */
+ if ((dev->control_state[1] != 2) ||
+ (dev->control_state[2] != 3) ||
+ (dev->control_state[4] != 2)) {
+ dev->control_state[1] = 2;
+ dev->control_state[2] = 3;
+ dev->control_state[4] = 2;
+ snd_usb_caiaq_send_command(dev,
+ EP1_CMD_WRITE_IO, dev->control_state, 6);
+ }
+
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
+ /* Audio 4 DJ - default input mode to phono */
+ dev->control_state[0] = 2;
+ snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO,
+ dev->control_state, 1);
+ break;
+ }
+
+ if (dev->spec.num_analog_audio_out +
+ dev->spec.num_analog_audio_in +
+ dev->spec.num_digital_audio_out +
+ dev->spec.num_digital_audio_in > 0) {
+ ret = snd_usb_caiaq_audio_init(dev);
+ if (ret < 0)
+ log("Unable to set up audio system (ret=%d)\n", ret);
+ }
+
+ if (dev->spec.num_midi_in +
+ dev->spec.num_midi_out > 0) {
+ ret = snd_usb_caiaq_midi_init(dev);
+ if (ret < 0)
+ log("Unable to set up MIDI system (ret=%d)\n", ret);
+ }
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ ret = snd_usb_caiaq_input_init(dev);
+ if (ret < 0)
+ log("Unable to set up input system (ret=%d)\n", ret);
+#endif
+
+ /* finally, register the card and all its sub-instances */
+ ret = snd_card_register(dev->chip.card);
+ if (ret < 0) {
+ log("snd_card_register() returned %d\n", ret);
+ snd_card_free(dev->chip.card);
+ }
+
+ ret = snd_usb_caiaq_control_init(dev);
+ if (ret < 0)
+ log("Unable to set up control system (ret=%d)\n", ret);
+}
+
+static int create_card(struct usb_device* usb_dev, struct snd_card **cardp)
+{
+ int devnum;
+ int err;
+ struct snd_card *card;
+ struct snd_usb_caiaqdev *dev;
+
+ for (devnum = 0; devnum < SNDRV_CARDS; devnum++)
+ if (enable[devnum] && !snd_card_used[devnum])
+ break;
+
+ if (devnum >= SNDRV_CARDS)
+ return -ENODEV;
+
+ err = snd_card_create(index[devnum], id[devnum], THIS_MODULE,
+ sizeof(struct snd_usb_caiaqdev), &card);
+ if (err < 0)
+ return err;
+
+ dev = caiaqdev(card);
+ dev->chip.dev = usb_dev;
+ dev->chip.card = card;
+ dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct));
+ spin_lock_init(&dev->spinlock);
+ snd_card_set_dev(card, &usb_dev->dev);
+
+ *cardp = card;
+ return 0;
+}
+
+static int __devinit init_card(struct snd_usb_caiaqdev *dev)
+{
+ char *c;
+ struct usb_device *usb_dev = dev->chip.dev;
+ struct snd_card *card = dev->chip.card;
+ int err, len;
+
+ if (usb_set_interface(usb_dev, 0, 1) != 0) {
+ log("can't set alt interface.\n");
+ return -EIO;
+ }
+
+ usb_init_urb(&dev->ep1_in_urb);
+ usb_init_urb(&dev->midi_out_urb);
+
+ usb_fill_bulk_urb(&dev->ep1_in_urb, usb_dev,
+ usb_rcvbulkpipe(usb_dev, 0x1),
+ dev->ep1_in_buf, EP1_BUFSIZE,
+ usb_ep1_command_reply_dispatch, dev);
+
+ usb_fill_bulk_urb(&dev->midi_out_urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, 0x1),
+ dev->midi_out_buf, EP1_BUFSIZE,
+ snd_usb_caiaq_midi_output_done, dev);
+
+ init_waitqueue_head(&dev->ep1_wait_queue);
+ init_waitqueue_head(&dev->prepare_wait_queue);
+
+ if (usb_submit_urb(&dev->ep1_in_urb, GFP_KERNEL) != 0)
+ return -EIO;
+
+ err = snd_usb_caiaq_send_command(dev, EP1_CMD_GET_DEVICE_INFO, NULL, 0);
+ if (err)
+ return err;
+
+ if (!wait_event_timeout(dev->ep1_wait_queue, dev->spec_received, HZ))
+ return -ENODEV;
+
+ usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+ dev->vendor_name, CAIAQ_USB_STR_LEN);
+
+ usb_string(usb_dev, usb_dev->descriptor.iProduct,
+ dev->product_name, CAIAQ_USB_STR_LEN);
+
+ usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+ dev->serial, CAIAQ_USB_STR_LEN);
+
+ /* terminate serial string at first white space occurence */
+ c = strchr(dev->serial, ' ');
+ if (c)
+ *c = '\0';
+
+ strcpy(card->driver, MODNAME);
+ strcpy(card->shortname, dev->product_name);
+
+ len = snprintf(card->longname, sizeof(card->longname),
+ "%s %s (serial %s, ",
+ dev->vendor_name, dev->product_name, dev->serial);
+
+ if (len < sizeof(card->longname) - 2)
+ len += usb_make_path(usb_dev, card->longname + len,
+ sizeof(card->longname) - len);
+
+ card->longname[len++] = ')';
+ card->longname[len] = '\0';
+ setup_card(dev);
+ return 0;
+}
+
+static int __devinit snd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct snd_card *card;
+ struct usb_device *device = interface_to_usbdev(intf);
+
+ ret = create_card(device, &card);
+
+ if (ret < 0)
+ return ret;
+
+ usb_set_intfdata(intf, card);
+ ret = init_card(caiaqdev(card));
+ if (ret < 0) {
+ log("unable to init card! (ret=%d)\n", ret);
+ snd_card_free(card);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void snd_disconnect(struct usb_interface *intf)
+{
+ struct snd_usb_caiaqdev *dev;
+ struct snd_card *card = usb_get_intfdata(intf);
+
+ debug("%s(%p)\n", __func__, intf);
+
+ if (!card)
+ return;
+
+ dev = caiaqdev(card);
+ snd_card_disconnect(card);
+
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ snd_usb_caiaq_input_free(dev);
+#endif
+ snd_usb_caiaq_audio_free(dev);
+
+ usb_kill_urb(&dev->ep1_in_urb);
+ usb_kill_urb(&dev->midi_out_urb);
+
+ snd_card_free(card);
+ usb_reset_device(interface_to_usbdev(intf));
+}
+
+
+MODULE_DEVICE_TABLE(usb, snd_usb_id_table);
+static struct usb_driver snd_usb_driver = {
+ .name = MODNAME,
+ .probe = snd_probe,
+ .disconnect = snd_disconnect,
+ .id_table = snd_usb_id_table,
+};
+
+static int __init snd_module_init(void)
+{
+ return usb_register(&snd_usb_driver);
+}
+
+static void __exit snd_module_exit(void)
+{
+ usb_deregister(&snd_usb_driver);
+}
+
+module_init(snd_module_init)
+module_exit(snd_module_exit)
+
--- /dev/null
+#ifndef CAIAQ_DEVICE_H
+#define CAIAQ_DEVICE_H
+
+#include "../usbaudio.h"
+
+#define USB_VID_NATIVEINSTRUMENTS 0x17cc
+
+#define USB_PID_RIGKONTROL2 0x1969
+#define USB_PID_RIGKONTROL3 0x1940
+#define USB_PID_KORECONTROLLER 0x4711
+#define USB_PID_KORECONTROLLER2 0x4712
+#define USB_PID_AK1 0x0815
+#define USB_PID_AUDIO4DJ 0x0839
+#define USB_PID_AUDIO8DJ 0x1978
+#define USB_PID_SESSIONIO 0x1915
+#define USB_PID_GUITARRIGMOBILE 0x0d8d
+
+#define EP1_BUFSIZE 64
+#define CAIAQ_USB_STR_LEN 0xff
+#define MAX_STREAMS 32
+
+//#define SND_USB_CAIAQ_DEBUG
+
+#define MODNAME "snd-usb-caiaq"
+#define log(x...) snd_printk(KERN_WARNING MODNAME" log: " x)
+
+#ifdef SND_USB_CAIAQ_DEBUG
+#define debug(x...) snd_printk(KERN_WARNING MODNAME " debug: " x)
+#else
+#define debug(x...) do { } while(0)
+#endif
+
+#define EP1_CMD_GET_DEVICE_INFO 0x1
+#define EP1_CMD_READ_ERP 0x2
+#define EP1_CMD_READ_ANALOG 0x3
+#define EP1_CMD_READ_IO 0x4
+#define EP1_CMD_WRITE_IO 0x5
+#define EP1_CMD_MIDI_READ 0x6
+#define EP1_CMD_MIDI_WRITE 0x7
+#define EP1_CMD_AUDIO_PARAMS 0x9
+#define EP1_CMD_AUTO_MSG 0xb
+#define EP1_CMD_DIMM_LEDS 0xc
+
+struct caiaq_device_spec {
+ unsigned short fw_version;
+ unsigned char hw_subtype;
+ unsigned char num_erp;
+ unsigned char num_analog_in;
+ unsigned char num_digital_in;
+ unsigned char num_digital_out;
+ unsigned char num_analog_audio_out;
+ unsigned char num_analog_audio_in;
+ unsigned char num_digital_audio_out;
+ unsigned char num_digital_audio_in;
+ unsigned char num_midi_out;
+ unsigned char num_midi_in;
+ unsigned char data_alignment;
+} __attribute__ ((packed));
+
+struct snd_usb_caiaq_cb_info;
+
+struct snd_usb_caiaqdev {
+ struct snd_usb_audio chip;
+
+ struct urb ep1_in_urb;
+ struct urb midi_out_urb;
+ struct urb **data_urbs_in;
+ struct urb **data_urbs_out;
+ struct snd_usb_caiaq_cb_info *data_cb_info;
+
+ unsigned char ep1_in_buf[EP1_BUFSIZE];
+ unsigned char ep1_out_buf[EP1_BUFSIZE];
+ unsigned char midi_out_buf[EP1_BUFSIZE];
+
+ struct caiaq_device_spec spec;
+ spinlock_t spinlock;
+ wait_queue_head_t ep1_wait_queue;
+ wait_queue_head_t prepare_wait_queue;
+ int spec_received, audio_parm_answer;
+ int midi_out_active;
+
+ char vendor_name[CAIAQ_USB_STR_LEN];
+ char product_name[CAIAQ_USB_STR_LEN];
+ char serial[CAIAQ_USB_STR_LEN];
+
+ int n_streams, n_audio_in, n_audio_out;
+ int streaming, first_packet, output_running;
+ int audio_in_buf_pos[MAX_STREAMS];
+ int audio_out_buf_pos[MAX_STREAMS];
+ int period_in_count[MAX_STREAMS];
+ int period_out_count[MAX_STREAMS];
+ int input_panic, output_panic, warned;
+ char *audio_in_buf, *audio_out_buf;
+ unsigned int samplerates, bpp;
+
+ struct snd_pcm_substream *sub_playback[MAX_STREAMS];
+ struct snd_pcm_substream *sub_capture[MAX_STREAMS];
+
+ /* Controls */
+ unsigned char control_state[64];
+
+ /* Linux input */
+#ifdef CONFIG_SND_USB_CAIAQ_INPUT
+ struct input_dev *input_dev;
+ char phys[64]; /* physical device path */
+ unsigned short keycode[64];
+#endif
+
+ /* ALSA */
+ struct snd_pcm *pcm;
+ struct snd_pcm_hardware pcm_info;
+ struct snd_rawmidi *rmidi;
+ struct snd_rawmidi_substream *midi_receive_substream;
+ struct snd_rawmidi_substream *midi_out_substream;
+};
+
+struct snd_usb_caiaq_cb_info {
+ struct snd_usb_caiaqdev *dev;
+ int index;
+};
+
+#define caiaqdev(c) ((struct snd_usb_caiaqdev*)(c)->private_data)
+
+int snd_usb_caiaq_set_audio_params (struct snd_usb_caiaqdev *dev, int rate, int depth, int bbp);
+int snd_usb_caiaq_set_auto_msg (struct snd_usb_caiaqdev *dev, int digital, int analog, int erp);
+int snd_usb_caiaq_send_command(struct snd_usb_caiaqdev *dev,
+ unsigned char command,
+ const unsigned char *buffer,
+ int len);
+
+#endif /* CAIAQ_DEVICE_H */
--- /dev/null
+/*
+ * Copyright (c) 2006,2007 Daniel Mack, Tim Ruetz
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <sound/pcm.h>
+
+#include "device.h"
+#include "input.h"
+
+static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A };
+static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
+ KEY_5, KEY_6, KEY_7 };
+static unsigned short keycode_rk3[] = { KEY_1, KEY_2, KEY_3, KEY_4,
+ KEY_5, KEY_6, KEY_7, KEY_5, KEY_6 };
+
+static unsigned short keycode_kore[] = {
+ KEY_FN_F1, /* "menu" */
+ KEY_FN_F7, /* "lcd backlight */
+ KEY_FN_F2, /* "control" */
+ KEY_FN_F3, /* "enter" */
+ KEY_FN_F4, /* "view" */
+ KEY_FN_F5, /* "esc" */
+ KEY_FN_F6, /* "sound" */
+ KEY_FN_F8, /* array spacer, never triggered. */
+ KEY_RIGHT,
+ KEY_DOWN,
+ KEY_UP,
+ KEY_LEFT,
+ KEY_SOUND, /* "listen" */
+ KEY_RECORD,
+ KEY_PLAYPAUSE,
+ KEY_STOP,
+ BTN_4, /* 8 softkeys */
+ BTN_3,
+ BTN_2,
+ BTN_1,
+ BTN_8,
+ BTN_7,
+ BTN_6,
+ BTN_5,
+ KEY_BRL_DOT4, /* touch sensitive knobs */
+ KEY_BRL_DOT3,
+ KEY_BRL_DOT2,
+ KEY_BRL_DOT1,
+ KEY_BRL_DOT8,
+ KEY_BRL_DOT7,
+ KEY_BRL_DOT6,
+ KEY_BRL_DOT5
+};
+
+#define DEG90 (range / 2)
+#define DEG180 (range)
+#define DEG270 (DEG90 + DEG180)
+#define DEG360 (DEG180 * 2)
+#define HIGH_PEAK (268)
+#define LOW_PEAK (-7)
+
+/* some of these devices have endless rotation potentiometers
+ * built in which use two tapers, 90 degrees phase shifted.
+ * this algorithm decodes them to one single value, ranging
+ * from 0 to 999 */
+static unsigned int decode_erp(unsigned char a, unsigned char b)
+{
+ int weight_a, weight_b;
+ int pos_a, pos_b;
+ int ret;
+ int range = HIGH_PEAK - LOW_PEAK;
+ int mid_value = (HIGH_PEAK + LOW_PEAK) / 2;
+
+ weight_b = abs(mid_value - a) - (range / 2 - 100) / 2;
+
+ if (weight_b < 0)
+ weight_b = 0;
+
+ if (weight_b > 100)
+ weight_b = 100;
+
+ weight_a = 100 - weight_b;
+
+ if (a < mid_value) {
+ /* 0..90 and 270..360 degrees */
+ pos_b = b - LOW_PEAK + DEG270;
+ if (pos_b >= DEG360)
+ pos_b -= DEG360;
+ } else
+ /* 90..270 degrees */
+ pos_b = HIGH_PEAK - b + DEG90;
+
+
+ if (b > mid_value)
+ /* 0..180 degrees */
+ pos_a = a - LOW_PEAK;
+ else
+ /* 180..360 degrees */
+ pos_a = HIGH_PEAK - a + DEG180;
+
+ /* interpolate both slider values, depending on weight factors */
+ /* 0..99 x DEG360 */
+ ret = pos_a * weight_a + pos_b * weight_b;
+
+ /* normalize to 0..999 */
+ ret *= 10;
+ ret /= DEG360;
+
+ if (ret < 0)
+ ret += 1000;
+
+ if (ret >= 1000)
+ ret -= 1000;
+
+ return ret;
+}
+
+#undef DEG90
+#undef DEG180
+#undef DEG270
+#undef DEG360
+#undef HIGH_PEAK
+#undef LOW_PEAK
+
+
+static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *dev,
+ const unsigned char *buf,
+ unsigned int len)
+{
+ struct input_dev *input_dev = dev->input_dev;
+
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+ input_report_abs(input_dev, ABS_X, (buf[4] << 8) | buf[5]);
+ input_report_abs(input_dev, ABS_Y, (buf[0] << 8) | buf[1]);
+ input_report_abs(input_dev, ABS_Z, (buf[2] << 8) | buf[3]);
+ input_sync(input_dev);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
+ input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]);
+ input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]);
+ input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]);
+ input_sync(input_dev);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
+ input_report_abs(input_dev, ABS_X, (buf[0] << 8) | buf[1]);
+ input_report_abs(input_dev, ABS_Y, (buf[2] << 8) | buf[3]);
+ input_report_abs(input_dev, ABS_Z, (buf[4] << 8) | buf[5]);
+ input_sync(input_dev);
+ break;
+ }
+}
+
+static void snd_caiaq_input_read_erp(struct snd_usb_caiaqdev *dev,
+ const char *buf, unsigned int len)
+{
+ struct input_dev *input_dev = dev->input_dev;
+ int i;
+
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ i = decode_erp(buf[0], buf[1]);
+ input_report_abs(input_dev, ABS_X, i);
+ input_sync(input_dev);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
+ i = decode_erp(buf[7], buf[5]);
+ input_report_abs(input_dev, ABS_HAT0X, i);
+ i = decode_erp(buf[12], buf[14]);
+ input_report_abs(input_dev, ABS_HAT0Y, i);
+ i = decode_erp(buf[15], buf[13]);
+ input_report_abs(input_dev, ABS_HAT1X, i);
+ i = decode_erp(buf[0], buf[2]);
+ input_report_abs(input_dev, ABS_HAT1Y, i);
+ i = decode_erp(buf[3], buf[1]);
+ input_report_abs(input_dev, ABS_HAT2X, i);
+ i = decode_erp(buf[8], buf[10]);
+ input_report_abs(input_dev, ABS_HAT2Y, i);
+ i = decode_erp(buf[11], buf[9]);
+ input_report_abs(input_dev, ABS_HAT3X, i);
+ i = decode_erp(buf[4], buf[6]);
+ input_report_abs(input_dev, ABS_HAT3Y, i);
+ input_sync(input_dev);
+ break;
+ }
+}
+
+static void snd_caiaq_input_read_io(struct snd_usb_caiaqdev *dev,
+ char *buf, unsigned int len)
+{
+ struct input_dev *input_dev = dev->input_dev;
+ unsigned short *keycode = input_dev->keycode;
+ int i;
+
+ if (!keycode)
+ return;
+
+ if (input_dev->id.product == USB_PID_RIGKONTROL2)
+ for (i = 0; i < len; i++)
+ buf[i] = ~buf[i];
+
+ for (i = 0; i < input_dev->keycodemax && i < len * 8; i++)
+ input_report_key(input_dev, keycode[i],
+ buf[i / 8] & (1 << (i % 8)));
+
+ if (dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER) ||
+ dev->chip.usb_id ==
+ USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2))
+ input_report_abs(dev->input_dev, ABS_MISC, 255 - buf[4]);
+
+ input_sync(input_dev);
+}
+
+void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev,
+ char *buf,
+ unsigned int len)
+{
+ if (!dev->input_dev || len < 1)
+ return;
+
+ switch (buf[0]) {
+ case EP1_CMD_READ_ANALOG:
+ snd_caiaq_input_read_analog(dev, buf + 1, len - 1);
+ break;
+ case EP1_CMD_READ_ERP:
+ snd_caiaq_input_read_erp(dev, buf + 1, len - 1);
+ break;
+ case EP1_CMD_READ_IO:
+ snd_caiaq_input_read_io(dev, buf + 1, len - 1);
+ break;
+ }
+}
+
+int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev)
+{
+ struct usb_device *usb_dev = dev->chip.dev;
+ struct input_dev *input;
+ int i, ret;
+
+ input = input_allocate_device();
+ if (!input)
+ return -ENOMEM;
+
+ usb_make_path(usb_dev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ input->name = dev->product_name;
+ input->phys = dev->phys;
+ usb_to_input_id(usb_dev, &input->id);
+ input->dev.parent = &usb_dev->dev;
+
+ switch (dev->chip.usb_id) {
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
+ BIT_MASK(ABS_Z);
+ BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk2));
+ memcpy(dev->keycode, keycode_rk2, sizeof(keycode_rk2));
+ input->keycodemax = ARRAY_SIZE(keycode_rk2);
+ input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
+ snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->absbit[0] = BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
+ BIT_MASK(ABS_Z);
+ BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_rk3));
+ memcpy(dev->keycode, keycode_rk3, sizeof(keycode_rk3));
+ input->keycodemax = ARRAY_SIZE(keycode_rk3);
+ input_set_abs_params(input, ABS_X, 0, 1024, 0, 10);
+ input_set_abs_params(input, ABS_Y, 0, 1024, 0, 10);
+ input_set_abs_params(input, ABS_Z, 0, 1024, 0, 10);
+ snd_usb_caiaq_set_auto_msg(dev, 1, 10, 0);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->absbit[0] = BIT_MASK(ABS_X);
+ BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_ak1));
+ memcpy(dev->keycode, keycode_ak1, sizeof(keycode_ak1));
+ input->keycodemax = ARRAY_SIZE(keycode_ak1);
+ input_set_abs_params(input, ABS_X, 0, 999, 0, 10);
+ snd_usb_caiaq_set_auto_msg(dev, 1, 0, 5);
+ break;
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
+ case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
+ input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input->absbit[0] = BIT_MASK(ABS_HAT0X) | BIT_MASK(ABS_HAT0Y) |
+ BIT_MASK(ABS_HAT1X) | BIT_MASK(ABS_HAT1Y) |
+ BIT_MASK(ABS_HAT2X) | BIT_MASK(ABS_HAT2Y) |
+ BIT_MASK(ABS_HAT3X) | BIT_MASK(ABS_HAT3Y) |
+ BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) |
+ BIT_MASK(ABS_Z);
+ input->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
+ BUILD_BUG_ON(sizeof(dev->keycode) < sizeof(keycode_kore));
+ memcpy(dev->keycode, keycode_kore, sizeof(keycode_kore));
+ input->keycodemax = ARRAY_SIZE(keycode_kore);
+ input_set_abs_params(input, ABS_HAT0X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT0Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT1X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT1Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT2X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT2Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT3X, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_HAT3Y, 0, 999, 0, 10);
+ input_set_abs_params(input, ABS_X, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_Y, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_Z, 0, 4096, 0, 10);
+ input_set_abs_params(input, ABS_MISC, 0, 255, 0, 1);
+ snd_usb_caiaq_set_auto_msg(dev, 1, 10, 5);
+ break;
+ default:
+ /* no input methods supported on this device */
+ input_free_device(input);
+ return 0;
+ }
+
+ input->keycode = dev->keycode;
+ input->keycodesize = sizeof(unsigned short);
+ for (i = 0; i < input->keycodemax; i++)
+ __set_bit(dev->keycode[i], input->keybit);
+
+ ret = input_register_device(input);
+ if (ret < 0) {
+ input_free_device(input);
+ return ret;
+ }
+
+ dev->input_dev = input;
+ return 0;
+}
+
+void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev)
+{
+ if (!dev || !dev->input_dev)
+ return;
+
+ input_unregister_device(dev->input_dev);
+ dev->input_dev = NULL;
+}
+
--- /dev/null
+#ifndef CAIAQ_INPUT_H
+#define CAIAQ_INPUT_H
+
+void snd_usb_caiaq_input_dispatch(struct snd_usb_caiaqdev *dev, char *buf, unsigned int len);
+int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_input_free(struct snd_usb_caiaqdev *dev);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2006,2007 Daniel Mack
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/usb.h>
+#include <sound/rawmidi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+#include "device.h"
+#include "midi.h"
+
+static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static int snd_usb_caiaq_midi_input_close(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static void snd_usb_caiaq_midi_input_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+
+ if (!dev)
+ return;
+
+ dev->midi_receive_substream = up ? substream : NULL;
+}
+
+
+static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substream)
+{
+ return 0;
+}
+
+static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream)
+{
+ struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+ if (dev->midi_out_active) {
+ usb_kill_urb(&dev->midi_out_urb);
+ dev->midi_out_active = 0;
+ }
+ return 0;
+}
+
+static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
+ struct snd_rawmidi_substream *substream)
+{
+ int len, ret;
+
+ dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
+ dev->midi_out_buf[1] = 0; /* port */
+ len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
+ EP1_BUFSIZE - 3);
+
+ if (len <= 0)
+ return;
+
+ dev->midi_out_buf[2] = len;
+ dev->midi_out_urb.transfer_buffer_length = len+3;
+
+ ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
+ if (ret < 0)
+ log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
+ "ret=%d, len=%d\n",
+ substream, ret, len);
+ else
+ dev->midi_out_active = 1;
+}
+
+static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
+{
+ struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+
+ if (up) {
+ dev->midi_out_substream = substream;
+ if (!dev->midi_out_active)
+ snd_usb_caiaq_midi_send(dev, substream);
+ } else {
+ dev->midi_out_substream = NULL;
+ }
+}
+
+
+static struct snd_rawmidi_ops snd_usb_caiaq_midi_output =
+{
+ .open = snd_usb_caiaq_midi_output_open,
+ .close = snd_usb_caiaq_midi_output_close,
+ .trigger = snd_usb_caiaq_midi_output_trigger,
+};
+
+static struct snd_rawmidi_ops snd_usb_caiaq_midi_input =
+{
+ .open = snd_usb_caiaq_midi_input_open,
+ .close = snd_usb_caiaq_midi_input_close,
+ .trigger = snd_usb_caiaq_midi_input_trigger,
+};
+
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev,
+ int port, const char *buf, int len)
+{
+ if (!dev->midi_receive_substream)
+ return;
+
+ snd_rawmidi_receive(dev->midi_receive_substream, buf, len);
+}
+
+int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
+{
+ int ret;
+ struct snd_rawmidi *rmidi;
+
+ ret = snd_rawmidi_new(device->chip.card, device->product_name, 0,
+ device->spec.num_midi_out,
+ device->spec.num_midi_in,
+ &rmidi);
+
+ if (ret < 0)
+ return ret;
+
+ strcpy(rmidi->name, device->product_name);
+
+ rmidi->info_flags = SNDRV_RAWMIDI_INFO_DUPLEX;
+ rmidi->private_data = device;
+
+ if (device->spec.num_midi_out > 0) {
+ rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
+ snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+ &snd_usb_caiaq_midi_output);
+ }
+
+ if (device->spec.num_midi_in > 0) {
+ rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
+ snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+ &snd_usb_caiaq_midi_input);
+ }
+
+ device->rmidi = rmidi;
+
+ return 0;
+}
+
+void snd_usb_caiaq_midi_output_done(struct urb* urb)
+{
+ struct snd_usb_caiaqdev *dev = urb->context;
+
+ dev->midi_out_active = 0;
+ if (urb->status != 0)
+ return;
+
+ if (!dev->midi_out_substream)
+ return;
+
+ snd_usb_caiaq_midi_send(dev, dev->midi_out_substream);
+}
+
--- /dev/null
+#ifndef CAIAQ_MIDI_H
+#define CAIAQ_MIDI_H
+
+int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *dev);
+void snd_usb_caiaq_midi_handle_input(struct snd_usb_caiaqdev *dev, int port, const char *buf, int len);
+void snd_usb_caiaq_midi_output_done(struct urb* urb);
+
+#endif /* CAIAQ_MIDI_H */
[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
- [QUIRK_MIDI_RAW] = snd_usb_create_midi_interface,
+ [QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface,
[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
[QUIRK_MIDI_CME] = snd_usb_create_midi_interface,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
- QUIRK_MIDI_RAW,
+ QUIRK_MIDI_FASTLANE,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
QUIRK_MIDI_US122L,
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
- case QUIRK_MIDI_RAW:
+ case QUIRK_MIDI_FASTLANE:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
+ /*
+ * Interface 1 contains isochronous endpoints, but with the same
+ * numbers as in interface 0. Since it is interface 1 that the
+ * USB core has most recently seen, these descriptors are now
+ * associated with the endpoint numbers. This will foul up our
+ * attempts to submit bulk/interrupt URBs to the endpoints in
+ * interface 0, so we have to make sure that the USB core looks
+ * again at interface 0 by calling usb_set_interface() on it.
+ */
+ usb_set_interface(umidi->chip->dev, 0, 0);
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
case QUIRK_MIDI_EMAGIC:
.data = & (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 0,
- .type = QUIRK_MIDI_RAW
+ .type = QUIRK_MIDI_FASTLANE
},
{
.ifnum = 1,
if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS)
return -ENOTTY;
- cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg)
- return -ENOMEM;
+ cfg = memdup_user((void *)arg, sizeof(*cfg));
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
- if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) {
- err = -EFAULT;
- goto free;
- }
if (cfg->version != USB_STREAM_INTERFACE_VERSION) {
err = -ENXIO;
goto free;
return true;
}
+static void snd_us122l_free(struct snd_card *card)
+{
+ struct us122l *us122l = US122L(card);
+ int index = us122l->chip.index;
+ if (index >= 0 && index < SNDRV_CARDS)
+ snd_us122l_card_used[index] = 0;
+}
+
static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
{
int dev;
if (err < 0)
return err;
snd_us122l_card_used[US122L(card)->chip.index = dev] = 1;
-
+ card->private_free = snd_us122l_free;
US122L(card)->chip.dev = device;
US122L(card)->chip.card = card;
mutex_init(&US122L(card)->mutex);
}
usb_put_intf(intf);
- usb_put_dev(US122L(card)->chip.dev);
+ usb_put_dev(us122l->chip.dev);
while (atomic_read(&us122l->mmap_count))
msleep(500);
if (access_ok(VERIFY_READ, dsp->image, dsp->length)) {
struct usb_device* dev = priv->chip.dev;
- char *buf = kmalloc(dsp->length, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- if (copy_from_user(buf, dsp->image, dsp->length)) {
- kfree(buf);
- return -EFAULT;
- }
+ char *buf;
+
+ buf = memdup_user(dsp->image, dsp->length);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
err = usb_set_interface(dev, 0, 1);
if (err)
snd_printk(KERN_ERR "usb_set_interface error \n");
static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb)
{
struct usb_stream *s = sk->s;
- unsigned l = 0;
- int pack;
-
- urb->iso_frame_desc[0].offset = 0;
- urb->iso_frame_desc[0].length = usb_stream_next_packet_size(sk);
- sk->out_phase = sk->out_phase_peeked;
- urb->transfer_buffer_length = urb->iso_frame_desc[0].length;
-
- for (pack = 1; pack < sk->n_o_ps; pack++) {
- l = usb_stream_next_packet_size(sk);
- if (s->idle_outsize + urb->transfer_buffer_length + l >
- s->period_size)
+ int pack, lb = 0;
+
+ for (pack = 0; pack < sk->n_o_ps; pack++) {
+ int l = usb_stream_next_packet_size(sk);
+ if (s->idle_outsize + lb + l > s->period_size)
goto check;
sk->out_phase = sk->out_phase_peeked;
- urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length;
+ urb->iso_frame_desc[pack].offset = lb;
urb->iso_frame_desc[pack].length = l;
- urb->transfer_buffer_length += l;
+ lb += l;
}
- snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length);
+ snd_printdd(KERN_DEBUG "%i\n", lb);
check:
urb->number_of_packets = pack;
- s->idle_outsize += urb->transfer_buffer_length - s->period_size;
+ urb->transfer_buffer_length = lb;
+ s->idle_outsize += lb - s->period_size;
snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize,
- urb->transfer_buffer_length, s->period_size);
+ lb, s->period_size);
}
static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
struct usb_stream *s = sk->s;
struct urb *io;
struct usb_iso_packet_descriptor *id, *od;
- int p, l = 0;
+ int p = 0, lb = 0, l = 0;
io = sk->idle_outurb;
od = io->iso_frame_desc;
- io->transfer_buffer_length = 0;
- for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) {
+ for (; s->sync_packet < 0; ++p, ++s->sync_packet) {
struct urb *ii = sk->completed_inurb;
id = ii->iso_frame_desc +
ii->number_of_packets + s->sync_packet;
l = id->actual_length;
od[p].length = l;
- od[p].offset = io->transfer_buffer_length;
- io->transfer_buffer_length += l;
+ od[p].offset = lb;
+ lb += l;
}
for (;
++p, ++s->sync_packet) {
l = inurb->iso_frame_desc[s->sync_packet].actual_length;
- if (s->idle_outsize + io->transfer_buffer_length + l >
- s->period_size)
+ if (s->idle_outsize + lb + l > s->period_size)
goto check_ok;
od[p].length = l;
- od[p].offset = io->transfer_buffer_length;
- io->transfer_buffer_length += l;
+ od[p].offset = lb;
+ lb += l;
}
check_ok:
s->sync_packet -= inurb->number_of_packets;
- if (s->sync_packet < -2 || s->sync_packet > 0) {
+ if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) {
snd_printk(KERN_WARNING "invalid sync_packet = %i;"
" p=%i nop=%i %i %x %x %x > %x\n",
s->sync_packet, p, inurb->number_of_packets,
- s->idle_outsize + io->transfer_buffer_length + l,
- s->idle_outsize, io->transfer_buffer_length, l,
+ s->idle_outsize + lb + l,
+ s->idle_outsize, lb, l,
s->period_size);
return -1;
}
- if (io->transfer_buffer_length % s->cfg.frame_size) {
+ if (unlikely(lb % s->cfg.frame_size)) {
snd_printk(KERN_WARNING"invalid outsize = %i\n",
- io->transfer_buffer_length);
+ lb);
return -1;
}
- s->idle_outsize += io->transfer_buffer_length - s->period_size;
+ s->idle_outsize += lb - s->period_size;
io->number_of_packets = p;
- if (s->idle_outsize > 0) {
- snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
- return -1;
- }
- return 0;
+ io->transfer_buffer_length = lb;
+ if (s->idle_outsize <= 0)
+ return 0;
+
+ snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
+ return -1;
}
static void prepare_inurb(int number_of_packets, struct urb *iu)
{
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
.rate_min = 44100,
int r;
gfn_t base_gfn;
unsigned long npages;
+ int largepages;
unsigned long i;
struct kvm_memory_slot *memslot;
struct kvm_memory_slot old, new;
for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
struct kvm_memory_slot *s = &kvm->memslots[i];
- if (s == memslot)
+ if (s == memslot || !s->npages)
continue;
if (!((base_gfn + npages <= s->base_gfn) ||
(base_gfn >= s->base_gfn + s->npages)))
new.userspace_addr = 0;
}
if (npages && !new.lpage_info) {
- int largepages = npages / KVM_PAGES_PER_HPAGE;
- if (npages % KVM_PAGES_PER_HPAGE)
- largepages++;
- if (base_gfn % KVM_PAGES_PER_HPAGE)
- largepages++;
+ largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE;
+ largepages -= base_gfn / KVM_PAGES_PER_HPAGE;
new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info));
switch (arg) {
case KVM_CAP_USER_MEMORY:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+ case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS:
return 1;
#ifdef CONFIG_HAVE_KVM_IRQCHIP
case KVM_CAP_IRQ_ROUTING:
bad_pfn = page_to_pfn(bad_page);
- if (!alloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
r = -ENOMEM;
goto out_free_0;
}
+ cpumask_clear(cpus_hardware_enabled);
r = kvm_arch_hardware_setup();
if (r < 0)
projects / cascardo / linux.git / commitdiff
